2386 files changed, 122559 insertions, 57299 deletions

diff --git a/.gitignore b/.gitignore
index efab0ebec859..a2939fc10b22 100644
--- a/.gitignore
+++ b/.gitignore
@@ -34,14 +34,18 @@ modules.builtin
 #
 # Top-level generic files
 #
-tags
-TAGS
-linux
-vmlinux
-vmlinuz
-System.map
-Module.markers
-Module.symvers
+/tags
+/TAGS
+/linux
+/vmlinux
+/vmlinuz
+/System.map
+/Module.markers
+/Module.symvers
+
+#
+# git files that we don't want to ignore even it they are dot-files
+#
 !.gitignore
 !.mailmap
 
diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb
index a986e9bbba3d..bcebb9eaedce 100644
--- a/Documentation/ABI/testing/sysfs-bus-usb
+++ b/Documentation/ABI/testing/sysfs-bus-usb
@@ -160,7 +160,7 @@ Description:
 		match the driver to the device.  For example:
 		# echo "046d c315" > /sys/bus/usb/drivers/foo/remove_id
 
-What:		/sys/bus/usb/device/.../avoid_reset
+What:		/sys/bus/usb/device/.../avoid_reset_quirk
 Date:		December 2009
 Contact:	Oliver Neukum <oliver@neukum.org>
 Description:
diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt
index 5aceb88b3f8b..05e2ae236865 100644
--- a/Documentation/DMA-API.txt
+++ b/Documentation/DMA-API.txt
@@ -4,20 +4,18 @@
         James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
 
 This document describes the DMA API.  For a more gentle introduction
-phrased in terms of the pci_ equivalents (and actual examples) see
-Documentation/PCI/PCI-DMA-mapping.txt.
+of the API (and actual examples) see
+Documentation/DMA-API-HOWTO.txt.
 
-This API is split into two pieces.  Part I describes the API and the
-corresponding pci_ API.  Part II describes the extensions to the API
-for supporting non-consistent memory machines.  Unless you know that
-your driver absolutely has to support non-consistent platforms (this
-is usually only legacy platforms) you should only use the API
-described in part I.
+This API is split into two pieces.  Part I describes the API.  Part II
+describes the extensions to the API for supporting non-consistent
+memory machines.  Unless you know that your driver absolutely has to
+support non-consistent platforms (this is usually only legacy
+platforms) you should only use the API described in part I.
 
-Part I - pci_ and dma_ Equivalent API 
+Part I - dma_ API
 -------------------------------------
 
-To get the pci_ API, you must #include <linux/pci.h>
 To get the dma_ API, you must #include <linux/dma-mapping.h>
 
 
@@ -27,9 +25,6 @@ Part Ia - Using large dma-coherent buffers
 void *
 dma_alloc_coherent(struct device *dev, size_t size,
 			     dma_addr_t *dma_handle, gfp_t flag)
-void *
-pci_alloc_consistent(struct pci_dev *dev, size_t size,
-			     dma_addr_t *dma_handle)
 
 Consistent memory is memory for which a write by either the device or
 the processor can immediately be read by the processor or device
@@ -53,15 +48,11 @@ The simplest way to do that is to use the dma_pool calls (see below).
 The flag parameter (dma_alloc_coherent only) allows the caller to
 specify the GFP_ flags (see kmalloc) for the allocation (the
 implementation may choose to ignore flags that affect the location of
-the returned memory, like GFP_DMA).  For pci_alloc_consistent, you
-must assume GFP_ATOMIC behaviour.
+the returned memory, like GFP_DMA).
 
 void
 dma_free_coherent(struct device *dev, size_t size, void *cpu_addr,
 			   dma_addr_t dma_handle)
-void
-pci_free_consistent(struct pci_dev *dev, size_t size, void *cpu_addr,
-			   dma_addr_t dma_handle)
 
 Free the region of consistent memory you previously allocated.  dev,
 size and dma_handle must all be the same as those passed into the
@@ -89,10 +80,6 @@ for alignment, like queue heads needing to be aligned on N-byte boundaries.
 	dma_pool_create(const char *name, struct device *dev,
 			size_t size, size_t align, size_t alloc);
 
-	struct pci_pool *
-	pci_pool_create(const char *name, struct pci_device *dev,
-			size_t size, size_t align, size_t alloc);
-
 The pool create() routines initialize a pool of dma-coherent buffers
 for use with a given device.  It must be called in a context which
 can sleep.
@@ -108,9 +95,6 @@ from this pool must not cross 4KByte boundaries.
 	void *dma_pool_alloc(struct dma_pool *pool, gfp_t gfp_flags,
 			dma_addr_t *dma_handle);
 
-	void *pci_pool_alloc(struct pci_pool *pool, gfp_t gfp_flags,
-			dma_addr_t *dma_handle);
-
 This allocates memory from the pool; the returned memory will meet the size
 and alignment requirements specified at creation time.  Pass GFP_ATOMIC to
 prevent blocking, or if it's permitted (not in_interrupt, not holding SMP locks),
@@ -122,9 +106,6 @@ pool's device.
 	void dma_pool_free(struct dma_pool *pool, void *vaddr,
 			dma_addr_t addr);
 
-	void pci_pool_free(struct pci_pool *pool, void *vaddr,
-			dma_addr_t addr);
-
 This puts memory back into the pool.  The pool is what was passed to
 the pool allocation routine; the cpu (vaddr) and dma addresses are what
 were returned when that routine allocated the memory being freed.
@@ -132,8 +113,6 @@ were returned when that routine allocated the memory being freed.
 
 	void dma_pool_destroy(struct dma_pool *pool);
 
-	void pci_pool_destroy(struct pci_pool *pool);
-
 The pool destroy() routines free the resources of the pool.  They must be
 called in a context which can sleep.  Make sure you've freed all allocated
 memory back to the pool before you destroy it.
@@ -144,8 +123,6 @@ Part Ic - DMA addressing limitations
 
 int
 dma_supported(struct device *dev, u64 mask)
-int
-pci_dma_supported(struct pci_dev *hwdev, u64 mask)
 
 Checks to see if the device can support DMA to the memory described by
 mask.
@@ -159,8 +136,14 @@ driver writers.
 
 int
 dma_set_mask(struct device *dev, u64 mask)
+
+Checks to see if the mask is possible and updates the device
+parameters if it is.
+
+Returns: 0 if successful and a negative error if not.
+
 int
-pci_set_dma_mask(struct pci_device *dev, u64 mask)
+dma_set_coherent_mask(struct device *dev, u64 mask)
 
 Checks to see if the mask is possible and updates the device
 parameters if it is.
@@ -187,9 +170,6 @@ Part Id - Streaming DMA mappings
 dma_addr_t
 dma_map_single(struct device *dev, void *cpu_addr, size_t size,
 		      enum dma_data_direction direction)
-dma_addr_t
-pci_map_single(struct pci_dev *hwdev, void *cpu_addr, size_t size,
-		      int direction)
 
 Maps a piece of processor virtual memory so it can be accessed by the
 device and returns the physical handle of the memory.
@@ -198,14 +178,10 @@ The direction for both api's may be converted freely by casting.
 However the dma_ API uses a strongly typed enumerator for its
 direction:
 
-DMA_NONE		= PCI_DMA_NONE		no direction (used for
-						debugging)
-DMA_TO_DEVICE		= PCI_DMA_TODEVICE	data is going from the
-						memory to the device
-DMA_FROM_DEVICE		= PCI_DMA_FROMDEVICE	data is coming from
-						the device to the
-						memory
-DMA_BIDIRECTIONAL	= PCI_DMA_BIDIRECTIONAL	direction isn't known
+DMA_NONE		no direction (used for debugging)
+DMA_TO_DEVICE		data is going from the memory to the device
+DMA_FROM_DEVICE		data is coming from the device to the memory
+DMA_BIDIRECTIONAL	direction isn't known
 
 Notes:  Not all memory regions in a machine can be mapped by this
 API.  Further, regions that appear to be physically contiguous in
@@ -268,9 +244,6 @@ cache lines are updated with data that the device may have changed).
 void
 dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 		 enum dma_data_direction direction)
-void
-pci_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr,
-		 size_t size, int direction)
 
 Unmaps the region previously mapped.  All the parameters passed in
 must be identical to those passed in (and returned) by the mapping
@@ -280,15 +253,9 @@ dma_addr_t
 dma_map_page(struct device *dev, struct page *page,
 		    unsigned long offset, size_t size,
 		    enum dma_data_direction direction)
-dma_addr_t
-pci_map_page(struct pci_dev *hwdev, struct page *page,
-		    unsigned long offset, size_t size, int direction)
 void
 dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
 	       enum dma_data_direction direction)
-void
-pci_unmap_page(struct pci_dev *hwdev, dma_addr_t dma_address,
-	       size_t size, int direction)
 
 API for mapping and unmapping for pages.  All the notes and warnings
 for the other mapping APIs apply here.  Also, although the <offset>
@@ -299,9 +266,6 @@ cache width is.
 int
 dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 
-int
-pci_dma_mapping_error(struct pci_dev *hwdev, dma_addr_t dma_addr)
-
 In some circumstances dma_map_single and dma_map_page will fail to create
 a mapping. A driver can check for these errors by testing the returned
 dma address with dma_mapping_error(). A non-zero return value means the mapping
@@ -311,9 +275,6 @@ reduce current DMA mapping usage or delay and try again later).
 	int
 	dma_map_sg(struct device *dev, struct scatterlist *sg,
 		int nents, enum dma_data_direction direction)
-	int
-	pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg,
-		int nents, int direction)
 
 Returns: the number of physical segments mapped (this may be shorter
 than <nents> passed in if some elements of the scatter/gather list are
@@ -353,9 +314,6 @@ accessed sg->address and sg->length as shown above.
 	void
 	dma_unmap_sg(struct device *dev, struct scatterlist *sg,
 		int nhwentries, enum dma_data_direction direction)
-	void
-	pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sg,
-		int nents, int direction)
 
 Unmap the previously mapped scatter/gather list.  All the parameters
 must be the same as those and passed in to the scatter/gather mapping
@@ -365,21 +323,23 @@ Note: <nents> must be the number you passed in, *not* the number of
 physical entries returned.
 
 void
-dma_sync_single(struct device *dev, dma_addr_t dma_handle, size_t size,
-		enum dma_data_direction direction)
+dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size,
+			enum dma_data_direction direction)
 void
-pci_dma_sync_single(struct pci_dev *hwdev, dma_addr_t dma_handle,
-			   size_t size, int direction)
+dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size,
+			   enum dma_data_direction direction)
 void
-dma_sync_sg(struct device *dev, struct scatterlist *sg, int nelems,
-			  enum dma_data_direction direction)
+dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
+		    enum dma_data_direction direction)
 void
-pci_dma_sync_sg(struct pci_dev *hwdev, struct scatterlist *sg,
-		       int nelems, int direction)
+dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems,
+		       enum dma_data_direction direction)
 
-Synchronise a single contiguous or scatter/gather mapping.  All the
-parameters must be the same as those passed into the single mapping
-API.
+Synchronise a single contiguous or scatter/gather mapping for the cpu
+and device. With the sync_sg API, all the parameters must be the same
+as those passed into the single mapping API. With the sync_single API,
+you can use dma_handle and size parameters that aren't identical to
+those passed into the single mapping API to do a partial sync.
 
 Notes:  You must do this:
 
@@ -461,9 +421,9 @@ void whizco_dma_map_sg_attrs(struct device *dev, dma_addr_t dma_addr,
 Part II - Advanced dma_ usage
 -----------------------------
 
-Warning: These pieces of the DMA API have no PCI equivalent.  They
-should also not be used in the majority of cases, since they cater for
-unlikely corner cases that don't belong in usual drivers.
+Warning: These pieces of the DMA API should not be used in the
+majority of cases, since they cater for unlikely corner cases that
+don't belong in usual drivers.
 
 If you don't understand how cache line coherency works between a
 processor and an I/O device, you should not be using this part of the
@@ -514,16 +474,6 @@ into the width returned by this call.  It will also always be a power
 of two for easy alignment.
 
 void
-dma_sync_single_range(struct device *dev, dma_addr_t dma_handle,
-		      unsigned long offset, size_t size,
-		      enum dma_data_direction direction)
-
-Does a partial sync, starting at offset and continuing for size.  You
-must be careful to observe the cache alignment and width when doing
-anything like this.  You must also be extra careful about accessing
-memory you intend to sync partially.
-
-void
 dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 	       enum dma_data_direction direction)
 
diff --git a/Documentation/DocBook/mtdnand.tmpl b/Documentation/DocBook/mtdnand.tmpl
index 5e7d84b48505..133cd6c3f3c1 100644
--- a/Documentation/DocBook/mtdnand.tmpl
+++ b/Documentation/DocBook/mtdnand.tmpl
@@ -488,7 +488,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
 				The ECC bytes must be placed immidiately after the data
 				bytes in order to make the syndrome generator work. This
 				is contrary to the usual layout used by software ECC. The
-				seperation of data and out of band area is not longer
+				separation of data and out of band area is not longer
 				possible. The nand driver code handles this layout and
 				the remaining free bytes in the oob area are managed by 
 				the autoplacement code. Provide a matching oob-layout
@@ -560,7 +560,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
 				bad blocks. They have factory marked good blocks. The marker pattern
 				is erased when the block is erased to be reused. So in case of
 				powerloss before writing the pattern back to the chip this block 
-				would be lost and added to the bad blocks. Therefor we scan the 
+				would be lost and added to the bad blocks. Therefore we scan the 
 				chip(s) when we detect them the first time for good blocks and 
 				store this information in a bad block table before erasing any 
 				of the blocks.
@@ -1094,7 +1094,7 @@ in this page</entry>
 		manufacturers specifications. This applies similar to the spare area. 
 	</para>
 	<para>
-		Therefor NAND aware filesystems must either write in page size chunks
+		Therefore NAND aware filesystems must either write in page size chunks
 		or hold a writebuffer to collect smaller writes until they sum up to 
 		pagesize. Available NAND aware filesystems: JFFS2, YAFFS. 		
 	</para>
diff --git a/Documentation/DocBook/v4l/common.xml b/Documentation/DocBook/v4l/common.xml
index c65f0ac9b6ee..cea23e1c4fc6 100644
--- a/Documentation/DocBook/v4l/common.xml
+++ b/Documentation/DocBook/v4l/common.xml
@@ -1170,7 +1170,7 @@ frames per second. If less than this number of frames is to be
 captured or output, applications can request frame skipping or
 duplicating on the driver side. This is especially useful when using
 the &func-read; or &func-write;, which are not augmented by timestamps
-or sequence counters, and to avoid unneccessary data copying.</para>
+or sequence counters, and to avoid unnecessary data copying.</para>
 
     <para>Finally these ioctls can be used to determine the number of
 buffers used internally by a driver in read/write mode. For
diff --git a/Documentation/DocBook/v4l/vidioc-g-parm.xml b/Documentation/DocBook/v4l/vidioc-g-parm.xml
index 78332d365ce9..392aa9e5571e 100644
--- a/Documentation/DocBook/v4l/vidioc-g-parm.xml
+++ b/Documentation/DocBook/v4l/vidioc-g-parm.xml
@@ -55,7 +55,7 @@ captured or output, applications can request frame skipping or
 duplicating on the driver side. This is especially useful when using
 the <function>read()</function> or <function>write()</function>, which
 are not augmented by timestamps or sequence counters, and to avoid
-unneccessary data copying.</para>
+unnecessary data copying.</para>
 
     <para>Further these ioctls can be used to determine the number of
 buffers used internally by a driver in read/write mode. For
diff --git a/Documentation/HOWTO b/Documentation/HOWTO
index 8495fc970391..f5395af88a41 100644
--- a/Documentation/HOWTO
+++ b/Documentation/HOWTO
@@ -221,8 +221,8 @@ branches.  These different branches are:
   - main 2.6.x kernel tree
   - 2.6.x.y -stable kernel tree
   - 2.6.x -git kernel patches
-  - 2.6.x -mm kernel patches
   - subsystem specific kernel trees and patches
+  - the 2.6.x -next kernel tree for integration tests
 
 2.6.x kernel tree
 -----------------
@@ -232,7 +232,7 @@ process is as follows:
   - As soon as a new kernel is released a two weeks window is open,
     during this period of time maintainers can submit big diffs to
     Linus, usually the patches that have already been included in the
-    -mm kernel for a few weeks.  The preferred way to submit big changes
+    -next kernel for a few weeks.  The preferred way to submit big changes
     is using git (the kernel's source management tool, more information
     can be found at http://git.or.cz/) but plain patches are also just
     fine.
@@ -293,84 +293,43 @@ daily and represent the current state of Linus' tree.  They are more
 experimental than -rc kernels since they are generated automatically
 without even a cursory glance to see if they are sane.
 
-2.6.x -mm kernel patches
-------------------------
-These are experimental kernel patches released by Andrew Morton.  Andrew
-takes all of the different subsystem kernel trees and patches and mushes
-them together, along with a lot of patches that have been plucked from
-the linux-kernel mailing list.  This tree serves as a proving ground for
-new features and patches.  Once a patch has proved its worth in -mm for
-a while Andrew or the subsystem maintainer pushes it on to Linus for
-inclusion in mainline.
-
-It is heavily encouraged that all new patches get tested in the -mm tree
-before they are sent to Linus for inclusion in the main kernel tree.  Code
-which does not make an appearance in -mm before the opening of the merge
-window will prove hard to merge into the mainline.
-
-These kernels are not appropriate for use on systems that are supposed
-to be stable and they are more risky to run than any of the other
-branches.
-
-If you wish to help out with the kernel development process, please test
-and use these kernel releases and provide feedback to the linux-kernel
-mailing list if you have any problems, and if everything works properly.
-
-In addition to all the other experimental patches, these kernels usually
-also contain any changes in the mainline -git kernels available at the
-time of release.
-
-The -mm kernels are not released on a fixed schedule, but usually a few
--mm kernels are released in between each -rc kernel (1 to 3 is common).
-
 Subsystem Specific kernel trees and patches
 -------------------------------------------
-A number of the different kernel subsystem developers expose their
-development trees so that others can see what is happening in the
-different areas of the kernel.  These trees are pulled into the -mm
-kernel releases as described above.
-
-Here is a list of some of the different kernel trees available:
-  git trees:
-    - Kbuild development tree, Sam Ravnborg <sam@ravnborg.org>
-	git.kernel.org:/pub/scm/linux/kernel/git/sam/kbuild.git
-
-    - ACPI development tree, Len Brown <len.brown@intel.com>
-	git.kernel.org:/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git
-
-    - Block development tree, Jens Axboe <jens.axboe@oracle.com>
-	git.kernel.org:/pub/scm/linux/kernel/git/axboe/linux-2.6-block.git
-
-    - DRM development tree, Dave Airlie <airlied@linux.ie>
-	git.kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6.git
-
-    - ia64 development tree, Tony Luck <tony.luck@intel.com>
-	git.kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6.git
-
-    - infiniband, Roland Dreier <rolandd@cisco.com>
-	git.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband.git
-
-    - libata, Jeff Garzik <jgarzik@pobox.com>
-	git.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
-
-    - network drivers, Jeff Garzik <jgarzik@pobox.com>
-	git.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git
-
-    - pcmcia, Dominik Brodowski <linux@dominikbrodowski.net>
-	git.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git
-
-    - SCSI, James Bottomley <James.Bottomley@hansenpartnership.com>
-	git.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
-
-    - x86, Ingo Molnar <mingo@elte.hu>
-	git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
-
-  quilt trees:
-    - USB, Driver Core, and I2C, Greg Kroah-Hartman <gregkh@suse.de>
-	kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
+The maintainers of the various kernel subsystems --- and also many
+kernel subsystem developers --- expose their current state of
+development in source repositories.  That way, others can see what is
+happening in the different areas of the kernel.  In areas where
+development is rapid, a developer may be asked to base his submissions
+onto such a subsystem kernel tree so that conflicts between the
+submission and other already ongoing work are avoided.
+
+Most of these repositories are git trees, but there are also other SCMs
+in use, or patch queues being published as quilt series.  Addresses of
+these subsystem repositories are listed in the MAINTAINERS file.  Many
+of them can be browsed at http://git.kernel.org/.
+
+Before a proposed patch is committed to such a subsystem tree, it is
+subject to review which primarily happens on mailing lists (see the
+respective section below).  For several kernel subsystems, this review
+process is tracked with the tool patchwork.  Patchwork offers a web
+interface which shows patch postings, any comments on a patch or
+revisions to it, and maintainers can mark patches as under review,
+accepted, or rejected.  Most of these patchwork sites are listed at
+http://patchwork.kernel.org/ or http://patchwork.ozlabs.org/.
+
+2.6.x -next kernel tree for integration tests
+---------------------------------------------
+Before updates from subsystem trees are merged into the mainline 2.6.x
+tree, they need to be integration-tested.  For this purpose, a special
+testing repository exists into which virtually all subsystem trees are
+pulled on an almost daily basis:
+	http://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git
+	http://linux.f-seidel.de/linux-next/pmwiki/
+
+This way, the -next kernel gives a summary outlook onto what will be
+expected to go into the mainline kernel at the next merge period.
+Adventurous testers are very welcome to runtime-test the -next kernel.
 
-  Other kernel trees can be found listed at http://git.kernel.org/ and in
-  the MAINTAINERS file.
 
 Bug Reporting
 -------------
diff --git a/Documentation/IPMI.txt b/Documentation/IPMI.txt
index bc38283379f0..69dd29ed824e 100644
--- a/Documentation/IPMI.txt
+++ b/Documentation/IPMI.txt
@@ -365,6 +365,7 @@ You can change this at module load time (for a module) with:
        regshifts=<shift1>,<shift2>,...
        slave_addrs=<addr1>,<addr2>,...
        force_kipmid=<enable1>,<enable2>,...
+       kipmid_max_busy_us=<ustime1>,<ustime2>,...
        unload_when_empty=[0|1]
 
 Each of these except si_trydefaults is a list, the first item for the
@@ -433,6 +434,7 @@ kernel command line as:
        ipmi_si.regshifts=<shift1>,<shift2>,...
        ipmi_si.slave_addrs=<addr1>,<addr2>,...
        ipmi_si.force_kipmid=<enable1>,<enable2>,...
+       ipmi_si.kipmid_max_busy_us=<ustime1>,<ustime2>,...
 
 It works the same as the module parameters of the same names.
 
@@ -450,6 +452,16 @@ force this thread on or off.  If you force it off and don't have
 interrupts, the driver will run VERY slowly.  Don't blame me,
 these interfaces suck.
 
+Unfortunately, this thread can use a lot of CPU depending on the
+interface's performance.  This can waste a lot of CPU and cause
+various issues with detecting idle CPU and using extra power.  To
+avoid this, the kipmid_max_busy_us sets the maximum amount of time, in
+microseconds, that kipmid will spin before sleeping for a tick.  This
+value sets a balance between performance and CPU waste and needs to be
+tuned to your needs.  Maybe, someday, auto-tuning will be added, but
+that's not a simple thing and even the auto-tuning would need to be
+tuned to the user's desired performance.
+
 The driver supports a hot add and remove of interfaces.  This way,
 interfaces can be added or removed after the kernel is up and running.
 This is done using /sys/modules/ipmi_si/parameters/hotmod, which is a
diff --git a/Documentation/Makefile b/Documentation/Makefile
index 94b945733534..6fc7ea1d1f9d 100644
--- a/Documentation/Makefile
+++ b/Documentation/Makefile
@@ -1,3 +1,3 @@
 obj-m := DocBook/ accounting/ auxdisplay/ connector/ \
-	filesystems/configfs/ ia64/ networking/ \
-	pcmcia/ spi/ video4linux/ vm/ watchdog/src/
+	filesystems/ filesystems/configfs/ ia64/ laptops/ networking/ \
+	pcmcia/ spi/ timers/ video4linux/ vm/ watchdog/src/
diff --git a/Documentation/PCI/PCI-DMA-mapping.txt b/Documentation/PCI/PCI-DMA-mapping.txt
index ecad88d9fe59..52618ab069ad 100644
--- a/Documentation/PCI/PCI-DMA-mapping.txt
+++ b/Documentation/PCI/PCI-DMA-mapping.txt
@@ -1,12 +1,12 @@
-			Dynamic DMA mapping
-			===================
+		     Dynamic DMA mapping Guide
+		     =========================
 
 		 David S. Miller <davem@redhat.com>
 		 Richard Henderson <rth@cygnus.com>
 		  Jakub Jelinek <jakub@redhat.com>
 
-This document describes the DMA mapping system in terms of the pci_
-API.  For a similar API that works for generic devices, see
+This is a guide to device driver writers on how to use the DMA API
+with example pseudo-code.  For a concise description of the API, see
 DMA-API.txt.
 
 Most of the 64bit platforms have special hardware that translates bus
@@ -26,12 +26,15 @@ mapped only for the time they are actually used and unmapped after the DMA
 transfer.
 
 The following API will work of course even on platforms where no such
-hardware exists, see e.g. arch/x86/include/asm/pci.h for how it is implemented on
-top of the virt_to_bus interface.
+hardware exists.
+
+Note that the DMA API works with any bus independent of the underlying
+microprocessor architecture. You should use the DMA API rather than
+the bus specific DMA API (e.g. pci_dma_*).
 
 First of all, you should make sure
 
-#include <linux/pci.h>
+#include <linux/dma-mapping.h>
 
 is in your driver. This file will obtain for you the definition of the
 dma_addr_t (which can hold any valid DMA address for the platform)
@@ -78,44 +81,43 @@ for you to DMA from/to.
 			DMA addressing limitations
 
 Does your device have any DMA addressing limitations?  For example, is
-your device only capable of driving the low order 24-bits of address
-on the PCI bus for SAC DMA transfers?  If so, you need to inform the
-PCI layer of this fact.
+your device only capable of driving the low order 24-bits of address?
+If so, you need to inform the kernel of this fact.
 
 By default, the kernel assumes that your device can address the full
-32-bits in a SAC cycle.  For a 64-bit DAC capable device, this needs
-to be increased.  And for a device with limitations, as discussed in
-the previous paragraph, it needs to be decreased.
-
-pci_alloc_consistent() by default will return 32-bit DMA addresses.
-PCI-X specification requires PCI-X devices to support 64-bit
-addressing (DAC) for all transactions. And at least one platform (SGI
-SN2) requires 64-bit consistent allocations to operate correctly when
-the IO bus is in PCI-X mode. Therefore, like with pci_set_dma_mask(),
-it's good practice to call pci_set_consistent_dma_mask() to set the
-appropriate mask even if your device only supports 32-bit DMA
-(default) and especially if it's a PCI-X device.
-
-For correct operation, you must interrogate the PCI layer in your
-device probe routine to see if the PCI controller on the machine can
-properly support the DMA addressing limitation your device has.  It is
-good style to do this even if your device holds the default setting,
+32-bits.  For a 64-bit capable device, this needs to be increased.
+And for a device with limitations, as discussed in the previous
+paragraph, it needs to be decreased.
+
+Special note about PCI: PCI-X specification requires PCI-X devices to
+support 64-bit addressing (DAC) for all transactions.  And at least
+one platform (SGI SN2) requires 64-bit consistent allocations to
+operate correctly when the IO bus is in PCI-X mode.
+
+For correct operation, you must interrogate the kernel in your device
+probe routine to see if the DMA controller on the machine can properly
+support the DMA addressing limitation your device has.  It is good
+style to do this even if your device holds the default setting,
 because this shows that you did think about these issues wrt. your
 device.
 
-The query is performed via a call to pci_set_dma_mask():
+The query is performed via a call to dma_set_mask():
 
-	int pci_set_dma_mask(struct pci_dev *pdev, u64 device_mask);
+	int dma_set_mask(struct device *dev, u64 mask);
 
 The query for consistent allocations is performed via a call to
-pci_set_consistent_dma_mask():
+dma_set_coherent_mask():
 
-	int pci_set_consistent_dma_mask(struct pci_dev *pdev, u64 device_mask);
+	int dma_set_coherent_mask(struct device *dev, u64 mask);
 
-Here, pdev is a pointer to the PCI device struct of your device, and
-device_mask is a bit mask describing which bits of a PCI address your
-device supports.  It returns zero if your card can perform DMA
-properly on the machine given the address mask you provided.
+Here, dev is a pointer to the device struct of your device, and mask
+is a bit mask describing which bits of an address your device
+supports.  It returns zero if your card can perform DMA properly on
+the machine given the address mask you provided.  In general, the
+device struct of your device is embedded in the bus specific device
+struct of your device.  For example, a pointer to the device struct of
+your PCI device is pdev->dev (pdev is a pointer to the PCI device
+struct of your device).
 
 If it returns non-zero, your device cannot perform DMA properly on
 this platform, and attempting to do so will result in undefined
@@ -133,31 +135,30 @@ of your driver reports that performance is bad or that the device is not
 even detected, you can ask them for the kernel messages to find out
 exactly why.
 
-The standard 32-bit addressing PCI device would do something like
-this:
+The standard 32-bit addressing device would do something like this:
 
-	if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
+	if (dma_set_mask(dev, DMA_BIT_MASK(32))) {
 		printk(KERN_WARNING
 		       "mydev: No suitable DMA available.\n");
 		goto ignore_this_device;
 	}
 
-Another common scenario is a 64-bit capable device.  The approach
-here is to try for 64-bit DAC addressing, but back down to a
-32-bit mask should that fail.  The PCI platform code may fail the
-64-bit mask not because the platform is not capable of 64-bit
-addressing.  Rather, it may fail in this case simply because
-32-bit SAC addressing is done more efficiently than DAC addressing.
-Sparc64 is one platform which behaves in this way.
+Another common scenario is a 64-bit capable device.  The approach here
+is to try for 64-bit addressing, but back down to a 32-bit mask that
+should not fail.  The kernel may fail the 64-bit mask not because the
+platform is not capable of 64-bit addressing.  Rather, it may fail in
+this case simply because 32-bit addressing is done more efficiently
+than 64-bit addressing.  For example, Sparc64 PCI SAC addressing is
+more efficient than DAC addressing.
 
 Here is how you would handle a 64-bit capable device which can drive
 all 64-bits when accessing streaming DMA:
 
 	int using_dac;
 
-	if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
+	if (!dma_set_mask(dev, DMA_BIT_MASK(64))) {
 		using_dac = 1;
-	} else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
+	} else if (!dma_set_mask(dev, DMA_BIT_MASK(32))) {
 		using_dac = 0;
 	} else {
 		printk(KERN_WARNING
@@ -170,36 +171,36 @@ the case would look like this:
 
 	int using_dac, consistent_using_dac;
 
-	if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
+	if (!dma_set_mask(dev, DMA_BIT_MASK(64))) {
 		using_dac = 1;
 	   	consistent_using_dac = 1;
-		pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
-	} else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
+		dma_set_coherent_mask(dev, DMA_BIT_MASK(64));
+	} else if (!dma_set_mask(dev, DMA_BIT_MASK(32))) {
 		using_dac = 0;
 		consistent_using_dac = 0;
-		pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+		dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
 	} else {
 		printk(KERN_WARNING
 		       "mydev: No suitable DMA available.\n");
 		goto ignore_this_device;
 	}
 
-pci_set_consistent_dma_mask() will always be able to set the same or a
-smaller mask as pci_set_dma_mask(). However for the rare case that a
+dma_set_coherent_mask() will always be able to set the same or a
+smaller mask as dma_set_mask(). However for the rare case that a
 device driver only uses consistent allocations, one would have to
-check the return value from pci_set_consistent_dma_mask().
+check the return value from dma_set_coherent_mask().
 
 Finally, if your device can only drive the low 24-bits of
-address during PCI bus mastering you might do something like:
+address you might do something like:
 
-	if (pci_set_dma_mask(pdev, DMA_BIT_MASK(24))) {
+	if (dma_set_mask(dev, DMA_BIT_MASK(24))) {
 		printk(KERN_WARNING
 		       "mydev: 24-bit DMA addressing not available.\n");
 		goto ignore_this_device;
 	}
 
-When pci_set_dma_mask() is successful, and returns zero, the PCI layer
-saves away this mask you have provided.  The PCI layer will use this
+When dma_set_mask() is successful, and returns zero, the kernel saves
+away this mask you have provided.  The kernel will use this
 information later when you make DMA mappings.
 
 There is a case which we are aware of at this time, which is worth
@@ -208,7 +209,7 @@ functions (for example a sound card provides playback and record
 functions) and the various different functions have _different_
 DMA addressing limitations, you may wish to probe each mask and
 only provide the functionality which the machine can handle.  It
-is important that the last call to pci_set_dma_mask() be for the
+is important that the last call to dma_set_mask() be for the
 most specific mask.
 
 Here is pseudo-code showing how this might be done:
@@ -217,17 +218,17 @@ Here is pseudo-code showing how this might be done:
 	#define RECORD_ADDRESS_BITS	DMA_BIT_MASK(24)
 
 	struct my_sound_card *card;
-	struct pci_dev *pdev;
+	struct device *dev;
 
 	...
-	if (!pci_set_dma_mask(pdev, PLAYBACK_ADDRESS_BITS)) {
+	if (!dma_set_mask(dev, PLAYBACK_ADDRESS_BITS)) {
 		card->playback_enabled = 1;
 	} else {
 		card->playback_enabled = 0;
 		printk(KERN_WARNING "%s: Playback disabled due to DMA limitations.\n",
 		       card->name);
 	}
-	if (!pci_set_dma_mask(pdev, RECORD_ADDRESS_BITS)) {
+	if (!dma_set_mask(dev, RECORD_ADDRESS_BITS)) {
 		card->record_enabled = 1;
 	} else {
 		card->record_enabled = 0;
@@ -252,8 +253,8 @@ There are two types of DMA mappings:
   Think of "consistent" as "synchronous" or "coherent".
 
   The current default is to return consistent memory in the low 32
-  bits of the PCI bus space.  However, for future compatibility you
-  should set the consistent mask even if this default is fine for your
+  bits of the bus space.  However, for future compatibility you should
+  set the consistent mask even if this default is fine for your
   driver.
 
   Good examples of what to use consistent mappings for are:
@@ -285,9 +286,9 @@ There are two types of DMA mappings:
 	     found in PCI bridges (such as by reading a register's value
 	     after writing it).
 
-- Streaming DMA mappings which are usually mapped for one DMA transfer,
-  unmapped right after it (unless you use pci_dma_sync_* below) and for which
-  hardware can optimize for sequential accesses.
+- Streaming DMA mappings which are usually mapped for one DMA
+  transfer, unmapped right after it (unless you use dma_sync_* below)
+  and for which hardware can optimize for sequential accesses.
 
   This of "streaming" as "asynchronous" or "outside the coherency
   domain".
@@ -302,8 +303,8 @@ There are two types of DMA mappings:
   optimizations the hardware allows.  To this end, when using
   such mappings you must be explicit about what you want to happen.
 
-Neither type of DMA mapping has alignment restrictions that come
-from PCI, although some devices may have such restrictions.
+Neither type of DMA mapping has alignment restrictions that come from
+the underlying bus, although some devices may have such restrictions.
 Also, systems with caches that aren't DMA-coherent will work better
 when the underlying buffers don't share cache lines with other data.
 
@@ -315,33 +316,27 @@ you should do:
 
 	dma_addr_t dma_handle;
 
-	cpu_addr = pci_alloc_consistent(pdev, size, &dma_handle);
-
-where pdev is a struct pci_dev *. This may be called in interrupt context.
-You should use dma_alloc_coherent (see DMA-API.txt) for buses
-where devices don't have struct pci_dev (like ISA, EISA).
+	cpu_addr = dma_alloc_coherent(dev, size, &dma_handle, gfp);
 
-This argument is needed because the DMA translations may be bus
-specific (and often is private to the bus which the device is attached
-to).
+where device is a struct device *. This may be called in interrupt
+context with the GFP_ATOMIC flag.
 
 Size is the length of the region you want to allocate, in bytes.
 
 This routine will allocate RAM for that region, so it acts similarly to
 __get_free_pages (but takes size instead of a page order).  If your
 driver needs regions sized smaller than a page, you may prefer using
-the pci_pool interface, described below.
-
-The consistent DMA mapping interfaces, for non-NULL pdev, will by
-default return a DMA address which is SAC (Single Address Cycle)
-addressable.  Even if the device indicates (via PCI dma mask) that it
-may address the upper 32-bits and thus perform DAC cycles, consistent
-allocation will only return > 32-bit PCI addresses for DMA if the
-consistent dma mask has been explicitly changed via
-pci_set_consistent_dma_mask().  This is true of the pci_pool interface
-as well.
-
-pci_alloc_consistent returns two values: the virtual address which you
+the dma_pool interface, described below.
+
+The consistent DMA mapping interfaces, for non-NULL dev, will by
+default return a DMA address which is 32-bit addressable.  Even if the
+device indicates (via DMA mask) that it may address the upper 32-bits,
+consistent allocation will only return > 32-bit addresses for DMA if
+the consistent DMA mask has been explicitly changed via
+dma_set_coherent_mask().  This is true of the dma_pool interface as
+well.
+
+dma_alloc_coherent returns two values: the virtual address which you
 can use to access it from the CPU and dma_handle which you pass to the
 card.
 
@@ -354,54 +349,54 @@ buffer you receive will not cross a 64K boundary.
 
 To unmap and free such a DMA region, you call:
 
-	pci_free_consistent(pdev, size, cpu_addr, dma_handle);
+	dma_free_coherent(dev, size, cpu_addr, dma_handle);
 
-where pdev, size are the same as in the above call and cpu_addr and
-dma_handle are the values pci_alloc_consistent returned to you.
+where dev, size are the same as in the above call and cpu_addr and
+dma_handle are the values dma_alloc_coherent returned to you.
 This function may not be called in interrupt context.
 
 If your driver needs lots of smaller memory regions, you can write
-custom code to subdivide pages returned by pci_alloc_consistent,
-or you can use the pci_pool API to do that.  A pci_pool is like
-a kmem_cache, but it uses pci_alloc_consistent not __get_free_pages.
+custom code to subdivide pages returned by dma_alloc_coherent,
+or you can use the dma_pool API to do that.  A dma_pool is like
+a kmem_cache, but it uses dma_alloc_coherent not __get_free_pages.
 Also, it understands common hardware constraints for alignment,
 like queue heads needing to be aligned on N byte boundaries.
 
-Create a pci_pool like this:
+Create a dma_pool like this:
 
-	struct pci_pool *pool;
+	struct dma_pool *pool;
 
-	pool = pci_pool_create(name, pdev, size, align, alloc);
+	pool = dma_pool_create(name, dev, size, align, alloc);
 
-The "name" is for diagnostics (like a kmem_cache name); pdev and size
+The "name" is for diagnostics (like a kmem_cache name); dev and size
 are as above.  The device's hardware alignment requirement for this
 type of data is "align" (which is expressed in bytes, and must be a
 power of two).  If your device has no boundary crossing restrictions,
 pass 0 for alloc; passing 4096 says memory allocated from this pool
 must not cross 4KByte boundaries (but at that time it may be better to
-go for pci_alloc_consistent directly instead).
+go for dma_alloc_coherent directly instead).
 
-Allocate memory from a pci pool like this:
+Allocate memory from a dma pool like this:
 
-	cpu_addr = pci_pool_alloc(pool, flags, &dma_handle);
+	cpu_addr = dma_pool_alloc(pool, flags, &dma_handle);
 
 flags are SLAB_KERNEL if blocking is permitted (not in_interrupt nor
-holding SMP locks), SLAB_ATOMIC otherwise.  Like pci_alloc_consistent,
+holding SMP locks), SLAB_ATOMIC otherwise.  Like dma_alloc_coherent,
 this returns two values, cpu_addr and dma_handle.
 
-Free memory that was allocated from a pci_pool like this:
+Free memory that was allocated from a dma_pool like this:
 
-	pci_pool_free(pool, cpu_addr, dma_handle);
+	dma_pool_free(pool, cpu_addr, dma_handle);
 
-where pool is what you passed to pci_pool_alloc, and cpu_addr and
-dma_handle are the values pci_pool_alloc returned. This function
+where pool is what you passed to dma_pool_alloc, and cpu_addr and
+dma_handle are the values dma_pool_alloc returned. This function
 may be called in interrupt context.
 
-Destroy a pci_pool by calling:
+Destroy a dma_pool by calling:
 
-	pci_pool_destroy(pool);
+	dma_pool_destroy(pool);
 
-Make sure you've called pci_pool_free for all memory allocated
+Make sure you've called dma_pool_free for all memory allocated
 from a pool before you destroy the pool. This function may not
 be called in interrupt context.
 
@@ -411,15 +406,15 @@ The interfaces described in subsequent portions of this document
 take a DMA direction argument, which is an integer and takes on
 one of the following values:
 
- PCI_DMA_BIDIRECTIONAL
- PCI_DMA_TODEVICE
- PCI_DMA_FROMDEVICE
- PCI_DMA_NONE
+ DMA_BIDIRECTIONAL
+ DMA_TO_DEVICE
+ DMA_FROM_DEVICE
+ DMA_NONE
 
 One should provide the exact DMA direction if you know it.
 
-PCI_DMA_TODEVICE means "from main memory to the PCI device"
-PCI_DMA_FROMDEVICE means "from the PCI device to main memory"
+DMA_TO_DEVICE means "from main memory to the device"
+DMA_FROM_DEVICE means "from the device to main memory"
 It is the direction in which the data moves during the DMA
 transfer.
 
@@ -427,12 +422,12 @@ You are _strongly_ encouraged to specify this as precisely
 as you possibly can.
 
 If you absolutely cannot know the direction of the DMA transfer,
-specify PCI_DMA_BIDIRECTIONAL.  It means that the DMA can go in
+specify DMA_BIDIRECTIONAL.  It means that the DMA can go in
 either direction.  The platform guarantees that you may legally
 specify this, and that it will work, but this may be at the
 cost of performance for example.
 
-The value PCI_DMA_NONE is to be used for debugging.  One can
+The value DMA_NONE is to be used for debugging.  One can
 hold this in a data structure before you come to know the
 precise direction, and this will help catch cases where your
 direction tracking logic has failed to set things up properly.
@@ -442,21 +437,21 @@ potential platform-specific optimizations of such) is for debugging.
 Some platforms actually have a write permission boolean which DMA
 mappings can be marked with, much like page protections in the user
 program address space.  Such platforms can and do report errors in the
-kernel logs when the PCI controller hardware detects violation of the
+kernel logs when the DMA controller hardware detects violation of the
 permission setting.
 
 Only streaming mappings specify a direction, consistent mappings
 implicitly have a direction attribute setting of
-PCI_DMA_BIDIRECTIONAL.
+DMA_BIDIRECTIONAL.
 
 The SCSI subsystem tells you the direction to use in the
 'sc_data_direction' member of the SCSI command your driver is
 working on.
 
 For Networking drivers, it's a rather simple affair.  For transmit
-packets, map/unmap them with the PCI_DMA_TODEVICE direction
+packets, map/unmap them with the DMA_TO_DEVICE direction
 specifier.  For receive packets, just the opposite, map/unmap them
-with the PCI_DMA_FROMDEVICE direction specifier.
+with the DMA_FROM_DEVICE direction specifier.
 
 		  Using Streaming DMA mappings
 
@@ -467,43 +462,43 @@ scatterlist.
 
 To map a single region, you do:
 
-	struct pci_dev *pdev = mydev->pdev;
+	struct device *dev = &my_dev->dev;
 	dma_addr_t dma_handle;
 	void *addr = buffer->ptr;
 	size_t size = buffer->len;
 
-	dma_handle = pci_map_single(pdev, addr, size, direction);
+	dma_handle = dma_map_single(dev, addr, size, direction);
 
 and to unmap it:
 
-	pci_unmap_single(pdev, dma_handle, size, direction);
+	dma_unmap_single(dev, dma_handle, size, direction);
 
-You should call pci_unmap_single when the DMA activity is finished, e.g.
+You should call dma_unmap_single when the DMA activity is finished, e.g.
 from the interrupt which told you that the DMA transfer is done.
 
 Using cpu pointers like this for single mappings has a disadvantage,
 you cannot reference HIGHMEM memory in this way.  Thus, there is a
-map/unmap interface pair akin to pci_{map,unmap}_single.  These
+map/unmap interface pair akin to dma_{map,unmap}_single.  These
 interfaces deal with page/offset pairs instead of cpu pointers.
 Specifically:
 
-	struct pci_dev *pdev = mydev->pdev;
+	struct device *dev = &my_dev->dev;
 	dma_addr_t dma_handle;
 	struct page *page = buffer->page;
 	unsigned long offset = buffer->offset;
 	size_t size = buffer->len;
 
-	dma_handle = pci_map_page(pdev, page, offset, size, direction);
+	dma_handle = dma_map_page(dev, page, offset, size, direction);
 
 	...
 
-	pci_unmap_page(pdev, dma_handle, size, direction);
+	dma_unmap_page(dev, dma_handle, size, direction);
 
 Here, "offset" means byte offset within the given page.
 
 With scatterlists, you map a region gathered from several regions by:
 
-	int i, count = pci_map_sg(pdev, sglist, nents, direction);
+	int i, count = dma_map_sg(dev, sglist, nents, direction);
 	struct scatterlist *sg;
 
 	for_each_sg(sglist, sg, count, i) {
@@ -527,16 +522,16 @@ accessed sg->address and sg->length as shown above.
 
 To unmap a scatterlist, just call:
 
-	pci_unmap_sg(pdev, sglist, nents, direction);
+	dma_unmap_sg(dev, sglist, nents, direction);
 
 Again, make sure DMA activity has already finished.
 
-PLEASE NOTE:  The 'nents' argument to the pci_unmap_sg call must be
-              the _same_ one you passed into the pci_map_sg call,
+PLEASE NOTE:  The 'nents' argument to the dma_unmap_sg call must be
+              the _same_ one you passed into the dma_map_sg call,
 	      it should _NOT_ be the 'count' value _returned_ from the
-              pci_map_sg call.
+              dma_map_sg call.
 
-Every pci_map_{single,sg} call should have its pci_unmap_{single,sg}
+Every dma_map_{single,sg} call should have its dma_unmap_{single,sg}
 counterpart, because the bus address space is a shared resource (although
 in some ports the mapping is per each BUS so less devices contend for the
 same bus address space) and you could render the machine unusable by eating
@@ -547,14 +542,14 @@ the data in between the DMA transfers, the buffer needs to be synced
 properly in order for the cpu and device to see the most uptodate and
 correct copy of the DMA buffer.
 
-So, firstly, just map it with pci_map_{single,sg}, and after each DMA
+So, firstly, just map it with dma_map_{single,sg}, and after each DMA
 transfer call either:
 
-	pci_dma_sync_single_for_cpu(pdev, dma_handle, size, direction);
+	dma_sync_single_for_cpu(dev, dma_handle, size, direction);
 
 or:
 
-	pci_dma_sync_sg_for_cpu(pdev, sglist, nents, direction);
+	dma_sync_sg_for_cpu(dev, sglist, nents, direction);
 
 as appropriate.
 
@@ -562,27 +557,27 @@ Then, if you wish to let the device get at the DMA area again,
 finish accessing the data with the cpu, and then before actually
 giving the buffer to the hardware call either:
 
-	pci_dma_sync_single_for_device(pdev, dma_handle, size, direction);
+	dma_sync_single_for_device(dev, dma_handle, size, direction);
 
 or:
 
-	pci_dma_sync_sg_for_device(dev, sglist, nents, direction);
+	dma_sync_sg_for_device(dev, sglist, nents, direction);
 
 as appropriate.
 
 After the last DMA transfer call one of the DMA unmap routines
-pci_unmap_{single,sg}. If you don't touch the data from the first pci_map_*
-call till pci_unmap_*, then you don't have to call the pci_dma_sync_*
+dma_unmap_{single,sg}. If you don't touch the data from the first dma_map_*
+call till dma_unmap_*, then you don't have to call the dma_sync_*
 routines at all.
 
 Here is pseudo code which shows a situation in which you would need
-to use the pci_dma_sync_*() interfaces.
+to use the dma_sync_*() interfaces.
 
 	my_card_setup_receive_buffer(struct my_card *cp, char *buffer, int len)
 	{
 		dma_addr_t mapping;
 
-		mapping = pci_map_single(cp->pdev, buffer, len, PCI_DMA_FROMDEVICE);
+		mapping = dma_map_single(cp->dev, buffer, len, DMA_FROM_DEVICE);
 
 		cp->rx_buf = buffer;
 		cp->rx_len = len;
@@ -606,25 +601,25 @@ to use the pci_dma_sync_*() interfaces.
 			 * the DMA transfer with the CPU first
 			 * so that we see updated contents.
 			 */
-			pci_dma_sync_single_for_cpu(cp->pdev, cp->rx_dma,
-						    cp->rx_len,
-						    PCI_DMA_FROMDEVICE);
+			dma_sync_single_for_cpu(&cp->dev, cp->rx_dma,
+						cp->rx_len,
+						DMA_FROM_DEVICE);
 
 			/* Now it is safe to examine the buffer. */
 			hp = (struct my_card_header *) cp->rx_buf;
 			if (header_is_ok(hp)) {
-				pci_unmap_single(cp->pdev, cp->rx_dma, cp->rx_len,
-						 PCI_DMA_FROMDEVICE);
+				dma_unmap_single(&cp->dev, cp->rx_dma, cp->rx_len,
+						 DMA_FROM_DEVICE);
 				pass_to_upper_layers(cp->rx_buf);
 				make_and_setup_new_rx_buf(cp);
 			} else {
 				/* Just sync the buffer and give it back
 				 * to the card.
 				 */
-				pci_dma_sync_single_for_device(cp->pdev,
-							       cp->rx_dma,
-							       cp->rx_len,
-							       PCI_DMA_FROMDEVICE);
+				dma_sync_single_for_device(&cp->dev,
+							   cp->rx_dma,
+							   cp->rx_len,
+							   DMA_FROM_DEVICE);
 				give_rx_buf_to_card(cp);
 			}
 		}
@@ -634,19 +629,19 @@ Drivers converted fully to this interface should not use virt_to_bus any
 longer, nor should they use bus_to_virt. Some drivers have to be changed a
 little bit, because there is no longer an equivalent to bus_to_virt in the
 dynamic DMA mapping scheme - you have to always store the DMA addresses
-returned by the pci_alloc_consistent, pci_pool_alloc, and pci_map_single
-calls (pci_map_sg stores them in the scatterlist itself if the platform
+returned by the dma_alloc_coherent, dma_pool_alloc, and dma_map_single
+calls (dma_map_sg stores them in the scatterlist itself if the platform
 supports dynamic DMA mapping in hardware) in your driver structures and/or
 in the card registers.
 
-All PCI drivers should be using these interfaces with no exceptions.
-It is planned to completely remove virt_to_bus() and bus_to_virt() as
+All drivers should be using these interfaces with no exceptions.  It
+is planned to completely remove virt_to_bus() and bus_to_virt() as
 they are entirely deprecated.  Some ports already do not provide these
 as it is impossible to correctly support them.
 
 		Optimizing Unmap State Space Consumption
 
-On many platforms, pci_unmap_{single,page}() is simply a nop.
+On many platforms, dma_unmap_{single,page}() is simply a nop.
 Therefore, keeping track of the mapping address and length is a waste
 of space.  Instead of filling your drivers up with ifdefs and the like
 to "work around" this (which would defeat the whole purpose of a
@@ -655,7 +650,7 @@ portable API) the following facilities are provided.
 Actually, instead of describing the macros one by one, we'll
 transform some example code.
 
-1) Use DECLARE_PCI_UNMAP_{ADDR,LEN} in state saving structures.
+1) Use DEFINE_DMA_UNMAP_{ADDR,LEN} in state saving structures.
    Example, before:
 
 	struct ring_state {
@@ -668,14 +663,11 @@ transform some example code.
 
 	struct ring_state {
 		struct sk_buff *skb;
-		DECLARE_PCI_UNMAP_ADDR(mapping)
-		DECLARE_PCI_UNMAP_LEN(len)
+		DEFINE_DMA_UNMAP_ADDR(mapping);
+		DEFINE_DMA_UNMAP_LEN(len);
 	};
 
-   NOTE: DO NOT put a semicolon at the end of the DECLARE_*()
-         macro.
-
-2) Use pci_unmap_{addr,len}_set to set these values.
+2) Use dma_unmap_{addr,len}_set to set these values.
    Example, before:
 
 	ringp->mapping = FOO;
@@ -683,21 +675,21 @@ transform some example code.
 
    after:
 
-	pci_unmap_addr_set(ringp, mapping, FOO);
-	pci_unmap_len_set(ringp, len, BAR);
+	dma_unmap_addr_set(ringp, mapping, FOO);
+	dma_unmap_len_set(ringp, len, BAR);
 
-3) Use pci_unmap_{addr,len} to access these values.
+3) Use dma_unmap_{addr,len} to access these values.
    Example, before:
 
-	pci_unmap_single(pdev, ringp->mapping, ringp->len,
-			 PCI_DMA_FROMDEVICE);
+	dma_unmap_single(dev, ringp->mapping, ringp->len,
+			 DMA_FROM_DEVICE);
 
    after:
 
-	pci_unmap_single(pdev,
-			 pci_unmap_addr(ringp, mapping),
-			 pci_unmap_len(ringp, len),
-			 PCI_DMA_FROMDEVICE);
+	dma_unmap_single(dev,
+			 dma_unmap_addr(ringp, mapping),
+			 dma_unmap_len(ringp, len),
+			 DMA_FROM_DEVICE);
 
 It really should be self-explanatory.  We treat the ADDR and LEN
 separately, because it is possible for an implementation to only
@@ -732,15 +724,15 @@ to "Closing".
 DMA address space is limited on some architectures and an allocation
 failure can be determined by:
 
-- checking if pci_alloc_consistent returns NULL or pci_map_sg returns 0
+- checking if dma_alloc_coherent returns NULL or dma_map_sg returns 0
 
-- checking the returned dma_addr_t of pci_map_single and pci_map_page
-  by using pci_dma_mapping_error():
+- checking the returned dma_addr_t of dma_map_single and dma_map_page
+  by using dma_mapping_error():
 
 	dma_addr_t dma_handle;
 
-	dma_handle = pci_map_single(pdev, addr, size, direction);
-	if (pci_dma_mapping_error(pdev, dma_handle)) {
+	dma_handle = dma_map_single(dev, addr, size, direction);
+	if (dma_mapping_error(dev, dma_handle)) {
 		/*
 		 * reduce current DMA mapping usage,
 		 * delay and try again later or
diff --git a/Documentation/SubmitChecklist b/Documentation/SubmitChecklist
index 1053a56be3b1..8916ca48bc95 100644
--- a/Documentation/SubmitChecklist
+++ b/Documentation/SubmitChecklist
@@ -9,10 +9,14 @@ Documentation/SubmittingPatches and elsewhere regarding submitting Linux
 kernel patches.
 
 
-1: Builds cleanly with applicable or modified CONFIG options =y, =m, and
+1: If you use a facility then #include the file that defines/declares
+   that facility.  Don't depend on other header files pulling in ones
+   that you use.
+
+2: Builds cleanly with applicable or modified CONFIG options =y, =m, and
    =n.  No gcc warnings/errors, no linker warnings/errors.
 
-2: Passes allnoconfig, allmodconfig
+2b: Passes allnoconfig, allmodconfig
 
 3: Builds on multiple CPU architectures by using local cross-compile tools
    or some other build farm.
diff --git a/Documentation/arm/Samsung-S3C24XX/CPUfreq.txt b/Documentation/arm/Samsung-S3C24XX/CPUfreq.txt
index 76b3a11e90be..fa968aa99d67 100644
--- a/Documentation/arm/Samsung-S3C24XX/CPUfreq.txt
+++ b/Documentation/arm/Samsung-S3C24XX/CPUfreq.txt
@@ -14,8 +14,8 @@ Introduction
  how the clocks are arranged. The first implementation used as single
  PLL to feed the ARM, memory and peripherals via a series of dividers
  and muxes and this is the implementation that is documented here. A
- newer version where there is a seperate PLL and clock divider for the
- ARM core is available as a seperate driver.
+ newer version where there is a separate PLL and clock divider for the
+ ARM core is available as a separate driver.
 
 
 Layout
diff --git a/Documentation/arm/Samsung/Overview.txt b/Documentation/arm/Samsung/Overview.txt
new file mode 100644
index 000000000000..7cced1fea9c3
--- /dev/null
+++ b/Documentation/arm/Samsung/Overview.txt
@@ -0,0 +1,86 @@
+		Samsung ARM Linux Overview
+		==========================
+
+Introduction
+------------
+
+  The Samsung range of ARM SoCs spans many similar devices, from the initial
+  ARM9 through to the newest ARM cores. This document shows an overview of
+  the current kernel support, how to use it and where to find the code
+  that supports this.
+
+  The currently supported SoCs are:
+
+  - S3C24XX: See Documentation/arm/Samsung-S3C24XX/Overview.txt for full list
+  - S3C64XX: S3C6400 and S3C6410
+  - S5PC6440
+
+  S5PC100 and S5PC110 support is currently being merged
+
+
+S3C24XX Systems
+---------------
+
+  There is still documentation in Documnetation/arm/Samsung-S3C24XX/ which
+  deals with the architecture and drivers specific to these devices.
+
+  See Documentation/arm/Samsung-S3C24XX/Overview.txt for more information
+  on the implementation details and specific support.
+
+
+Configuration
+-------------
+
+  A number of configurations are supplied, as there is no current way of
+  unifying all the SoCs into one kernel.
+
+  s5p6440_defconfig - S5P6440 specific default configuration
+  s5pc100_defconfig - S5PC100 specific default configuration
+
+
+Layout
+------
+
+  The directory layout is currently being restructured, and consists of
+  several platform directories and then the machine specific directories
+  of the CPUs being built for.
+
+  plat-samsung provides the base for all the implementations, and is the
+  last in the line of include directories that are processed for the build
+  specific information. It contains the base clock, GPIO and device definitions
+  to get the system running.
+
+  plat-s3c is the s3c24xx/s3c64xx platform directory, although it is currently
+  involved in other builds this will be phased out once the relevant code is
+  moved elsewhere.
+
+  plat-s3c24xx is for s3c24xx specific builds, see the S3C24XX docs.
+
+  plat-s3c64xx is for the s3c64xx specific bits, see the S3C24XX docs.
+
+  plat-s5p is for s5p specific builds, more to be added.
+
+
+  [ to finish ]
+
+
+Port Contributors
+-----------------
+
+  Ben Dooks (BJD)
+  Vincent Sanders
+  Herbert Potzl
+  Arnaud Patard (RTP)
+  Roc Wu
+  Klaus Fetscher
+  Dimitry Andric
+  Shannon Holland
+  Guillaume Gourat (NexVision)
+  Christer Weinigel (wingel) (Acer N30)
+  Lucas Correia Villa Real (S3C2400 port)
+
+
+Document Author
+---------------
+
+Copyright 2009-2010 Ben Dooks <ben-linux@fluff.org>
diff --git a/Documentation/arm/Samsung/clksrc-change-registers.awk b/Documentation/arm/Samsung/clksrc-change-registers.awk
new file mode 100755
index 000000000000..0c50220851fb
--- /dev/null
+++ b/Documentation/arm/Samsung/clksrc-change-registers.awk
@@ -0,0 +1,167 @@
+#!/usr/bin/awk -f
+#
+# Copyright 2010 Ben Dooks <ben-linux@fluff.org>
+#
+# Released under GPLv2
+
+# example usage
+# ./clksrc-change-registers.awk arch/arm/plat-s5pc1xx/include/plat/regs-clock.h < src > dst
+
+function extract_value(s)
+{
+    eqat = index(s, "=")
+    comat = index(s, ",")
+    return substr(s, eqat+2, (comat-eqat)-2)
+}
+
+function remove_brackets(b)
+{
+    return substr(b, 2, length(b)-2)
+}
+
+function splitdefine(l, p)
+{
+    r = split(l, tp)
+
+    p[0] = tp[2]
+    p[1] = remove_brackets(tp[3])
+}
+
+function find_length(f)
+{
+    if (0)
+	printf "find_length " f "\n" > "/dev/stderr"
+
+    if (f ~ /0x1/)
+	return 1
+    else if (f ~ /0x3/)
+	return 2
+    else if (f ~ /0x7/)
+	return 3
+    else if (f ~ /0xf/)
+	return 4
+
+    printf "unknown legnth " f "\n" > "/dev/stderr"
+    exit
+}
+
+function find_shift(s)
+{
+    id = index(s, "<")
+    if (id <= 0) {
+	printf "cannot find shift " s "\n" > "/dev/stderr"
+	exit
+    }
+
+    return substr(s, id+2)
+}
+
+
+BEGIN {
+    if (ARGC < 2) {
+	print "too few arguments" > "/dev/stderr"
+	exit
+    }
+
+# read the header file and find the mask values that we will need
+# to replace and create an associative array of values
+
+    while (getline line < ARGV[1] > 0) {
+	if (line ~ /\#define.*_MASK/ &&
+	    !(line ~ /S5PC100_EPLL_MASK/) &&
+	    !(line ~ /USB_SIG_MASK/)) {
+	    splitdefine(line, fields)
+	    name = fields[0]
+	    if (0)
+		printf "MASK " line "\n" > "/dev/stderr"
+	    dmask[name,0] = find_length(fields[1])
+	    dmask[name,1] = find_shift(fields[1])
+	    if (0)
+		printf "=> '" name "' LENGTH=" dmask[name,0] " SHIFT=" dmask[name,1] "\n" > "/dev/stderr"
+	} else {
+	}
+    }
+
+    delete ARGV[1]
+}
+
+/clksrc_clk.*=.*{/ {
+    shift=""
+    mask=""
+    divshift=""
+    reg_div=""
+    reg_src=""
+    indent=1
+
+    print $0
+
+    for(; indent >= 1;) {
+	if ((getline line) <= 0) {
+	    printf "unexpected end of file" > "/dev/stderr"
+	    exit 1;
+	}
+
+	if (line ~ /\.shift/) {
+	    shift = extract_value(line)
+	} else if (line ~ /\.mask/) {
+	    mask = extract_value(line)
+	} else if (line ~ /\.reg_divider/) {
+	    reg_div = extract_value(line)
+	} else if (line ~ /\.reg_source/) {
+	    reg_src = extract_value(line)
+	} else if (line ~ /\.divider_shift/) {
+	    divshift = extract_value(line)
+	} else if (line ~ /{/) {
+		indent++
+		print line
+	    } else if (line ~ /}/) {
+	    indent--
+
+	    if (indent == 0) {
+		if (0) {
+		    printf "shift '" shift   "' ='" dmask[shift,0] "'\n" > "/dev/stderr"
+		    printf "mask  '" mask    "'\n" > "/dev/stderr"
+		    printf "dshft '" divshift "'\n" > "/dev/stderr"
+		    printf "rdiv  '" reg_div "'\n" > "/dev/stderr"
+		    printf "rsrc  '" reg_src "'\n" > "/dev/stderr"
+		}
+
+		generated = mask
+		sub(reg_src, reg_div, generated)
+
+		if (0) {
+		    printf "/* rsrc " reg_src " */\n"
+		    printf "/* rdiv " reg_div " */\n"
+		    printf "/* shift " shift " */\n"
+		    printf "/* mask " mask " */\n"
+		    printf "/* generated " generated " */\n"
+		}
+
+		if (reg_div != "") {
+		    printf "\t.reg_div = { "
+		    printf ".reg = " reg_div ", "
+		    printf ".shift = " dmask[generated,1] ", "
+		    printf ".size = " dmask[generated,0] ", "
+		    printf "},\n"
+		}
+
+		printf "\t.reg_src = { "
+		printf ".reg = " reg_src ", "
+		printf ".shift = " dmask[mask,1] ", "
+		printf ".size = " dmask[mask,0] ", "
+
+		printf "},\n"
+
+	    }
+
+	    print line
+	} else {
+	    print line
+	}
+
+	if (0)
+	    printf indent ":" line "\n" > "/dev/stderr"
+    }
+}
+
+// && ! /clksrc_clk.*=.*{/ { print $0 }
diff --git a/Documentation/cgroups/cgroup_event_listener.c b/Documentation/cgroups/cgroup_event_listener.c
new file mode 100644
index 000000000000..8c2bfc4a6358
--- /dev/null
+++ b/Documentation/cgroups/cgroup_event_listener.c
@@ -0,0 +1,110 @@
+/*
+ * cgroup_event_listener.c - Simple listener of cgroup events
+ *
+ * Copyright (C) Kirill A. Shutemov <kirill@shutemov.name>
+ */
+
+#include <assert.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <libgen.h>
+#include <limits.h>
+#include <stdio.h>
+#include <string.h>
+#include <unistd.h>
+
+#include <sys/eventfd.h>
+
+#define USAGE_STR "Usage: cgroup_event_listener <path-to-control-file> <args>\n"
+
+int main(int argc, char **argv)
+{
+	int efd = -1;
+	int cfd = -1;
+	int event_control = -1;
+	char event_control_path[PATH_MAX];
+	char line[LINE_MAX];
+	int ret;
+
+	if (argc != 3) {
+		fputs(USAGE_STR, stderr);
+		return 1;
+	}
+
+	cfd = open(argv[1], O_RDONLY);
+	if (cfd == -1) {
+		fprintf(stderr, "Cannot open %s: %s\n", argv[1],
+				strerror(errno));
+		goto out;
+	}
+
+	ret = snprintf(event_control_path, PATH_MAX, "%s/cgroup.event_control",
+			dirname(argv[1]));
+	if (ret >= PATH_MAX) {
+		fputs("Path to cgroup.event_control is too long\n", stderr);
+		goto out;
+	}
+
+	event_control = open(event_control_path, O_WRONLY);
+	if (event_control == -1) {
+		fprintf(stderr, "Cannot open %s: %s\n", event_control_path,
+				strerror(errno));
+		goto out;
+	}
+
+	efd = eventfd(0, 0);
+	if (efd == -1) {
+		perror("eventfd() failed");
+		goto out;
+	}
+
+	ret = snprintf(line, LINE_MAX, "%d %d %s", efd, cfd, argv[2]);
+	if (ret >= LINE_MAX) {
+		fputs("Arguments string is too long\n", stderr);
+		goto out;
+	}
+
+	ret = write(event_control, line, strlen(line) + 1);
+	if (ret == -1) {
+		perror("Cannot write to cgroup.event_control");
+		goto out;
+	}
+
+	while (1) {
+		uint64_t result;
+
+		ret = read(efd, &result, sizeof(result));
+		if (ret == -1) {
+			if (errno == EINTR)
+				continue;
+			perror("Cannot read from eventfd");
+			break;
+		}
+		assert(ret == sizeof(result));
+
+		ret = access(event_control_path, W_OK);
+		if ((ret == -1) && (errno == ENOENT)) {
+				puts("The cgroup seems to have removed.");
+				ret = 0;
+				break;
+		}
+
+		if (ret == -1) {
+			perror("cgroup.event_control "
+					"is not accessable any more");
+			break;
+		}
+
+		printf("%s %s: crossed\n", argv[1], argv[2]);
+	}
+
+out:
+	if (efd >= 0)
+		close(efd);
+	if (event_control >= 0)
+		close(event_control);
+	if (cfd >= 0)
+		close(cfd);
+
+	return (ret != 0);
+}
diff --git a/Documentation/cgroups/cgroups.txt b/Documentation/cgroups/cgroups.txt
index 0b33bfe7dde9..fd588ff0e296 100644
--- a/Documentation/cgroups/cgroups.txt
+++ b/Documentation/cgroups/cgroups.txt
@@ -22,6 +22,8 @@ CONTENTS:
 2. Usage Examples and Syntax
   2.1 Basic Usage
   2.2 Attaching processes
+  2.3 Mounting hierarchies by name
+  2.4 Notification API
 3. Kernel API
   3.1 Overview
   3.2 Synchronization
@@ -434,6 +436,25 @@ you give a subsystem a name.
 The name of the subsystem appears as part of the hierarchy description
 in /proc/mounts and /proc/<pid>/cgroups.
 
+2.4 Notification API
+--------------------
+
+There is mechanism which allows to get notifications about changing
+status of a cgroup.
+
+To register new notification handler you need:
+ - create a file descriptor for event notification using eventfd(2);
+ - open a control file to be monitored (e.g. memory.usage_in_bytes);
+ - write "<event_fd> <control_fd> <args>" to cgroup.event_control.
+   Interpretation of args is defined by control file implementation;
+
+eventfd will be woken up by control file implementation or when the
+cgroup is removed.
+
+To unregister notification handler just close eventfd.
+
+NOTE: Support of notifications should be implemented for the control
+file. See documentation for the subsystem.
 
 3. Kernel API
 =============
@@ -488,6 +509,11 @@ Each subsystem should:
 - add an entry in linux/cgroup_subsys.h
 - define a cgroup_subsys object called <name>_subsys
 
+If a subsystem can be compiled as a module, it should also have in its
+module initcall a call to cgroup_load_subsys(), and in its exitcall a
+call to cgroup_unload_subsys(). It should also set its_subsys.module =
+THIS_MODULE in its .c file.
+
 Each subsystem may export the following methods. The only mandatory
 methods are create/destroy. Any others that are null are presumed to
 be successful no-ops.
@@ -536,10 +562,21 @@ returns an error, this will abort the attach operation.  If a NULL
 task is passed, then a successful result indicates that *any*
 unspecified task can be moved into the cgroup. Note that this isn't
 called on a fork. If this method returns 0 (success) then this should
-remain valid while the caller holds cgroup_mutex. If threadgroup is
+remain valid while the caller holds cgroup_mutex and it is ensured that either
+attach() or cancel_attach() will be called in future. If threadgroup is
 true, then a successful result indicates that all threads in the given
 thread's threadgroup can be moved together.
 
+void cancel_attach(struct cgroup_subsys *ss, struct cgroup *cgrp,
+	       struct task_struct *task, bool threadgroup)
+(cgroup_mutex held by caller)
+
+Called when a task attach operation has failed after can_attach() has succeeded.
+A subsystem whose can_attach() has some side-effects should provide this
+function, so that the subsytem can implement a rollback. If not, not necessary.
+This will be called only about subsystems whose can_attach() operation have
+succeeded.
+
 void attach(struct cgroup_subsys *ss, struct cgroup *cgrp,
 	    struct cgroup *old_cgrp, struct task_struct *task,
 	    bool threadgroup)
diff --git a/Documentation/cgroups/cpusets.txt b/Documentation/cgroups/cpusets.txt
index 1d7e9784439a..4160df82b3f5 100644
--- a/Documentation/cgroups/cpusets.txt
+++ b/Documentation/cgroups/cpusets.txt
@@ -168,20 +168,20 @@ Each cpuset is represented by a directory in the cgroup file system
 containing (on top of the standard cgroup files) the following
 files describing that cpuset:
 
- - cpus: list of CPUs in that cpuset
- - mems: list of Memory Nodes in that cpuset
- - memory_migrate flag: if set, move pages to cpusets nodes
- - cpu_exclusive flag: is cpu placement exclusive?
- - mem_exclusive flag: is memory placement exclusive?
- - mem_hardwall flag:  is memory allocation hardwalled
- - memory_pressure: measure of how much paging pressure in cpuset
- - memory_spread_page flag: if set, spread page cache evenly on allowed nodes
- - memory_spread_slab flag: if set, spread slab cache evenly on allowed nodes
- - sched_load_balance flag: if set, load balance within CPUs on that cpuset
- - sched_relax_domain_level: the searching range when migrating tasks
+ - cpuset.cpus: list of CPUs in that cpuset
+ - cpuset.mems: list of Memory Nodes in that cpuset
+ - cpuset.memory_migrate flag: if set, move pages to cpusets nodes
+ - cpuset.cpu_exclusive flag: is cpu placement exclusive?
+ - cpuset.mem_exclusive flag: is memory placement exclusive?
+ - cpuset.mem_hardwall flag:  is memory allocation hardwalled
+ - cpuset.memory_pressure: measure of how much paging pressure in cpuset
+ - cpuset.memory_spread_page flag: if set, spread page cache evenly on allowed nodes
+ - cpuset.memory_spread_slab flag: if set, spread slab cache evenly on allowed nodes
+ - cpuset.sched_load_balance flag: if set, load balance within CPUs on that cpuset
+ - cpuset.sched_relax_domain_level: the searching range when migrating tasks
 
 In addition, the root cpuset only has the following file:
- - memory_pressure_enabled flag: compute memory_pressure?
+ - cpuset.memory_pressure_enabled flag: compute memory_pressure?
 
 New cpusets are created using the mkdir system call or shell
 command.  The properties of a cpuset, such as its flags, allowed
@@ -229,7 +229,7 @@ If a cpuset is cpu or mem exclusive, no other cpuset, other than
 a direct ancestor or descendant, may share any of the same CPUs or
 Memory Nodes.
 
-A cpuset that is mem_exclusive *or* mem_hardwall is "hardwalled",
+A cpuset that is cpuset.mem_exclusive *or* cpuset.mem_hardwall is "hardwalled",
 i.e. it restricts kernel allocations for page, buffer and other data
 commonly shared by the kernel across multiple users.  All cpusets,
 whether hardwalled or not, restrict allocations of memory for user
@@ -304,15 +304,15 @@ times 1000.
 ---------------------------
 There are two boolean flag files per cpuset that control where the
 kernel allocates pages for the file system buffers and related in
-kernel data structures.  They are called 'memory_spread_page' and
-'memory_spread_slab'.
+kernel data structures.  They are called 'cpuset.memory_spread_page' and
+'cpuset.memory_spread_slab'.
 
-If the per-cpuset boolean flag file 'memory_spread_page' is set, then
+If the per-cpuset boolean flag file 'cpuset.memory_spread_page' is set, then
 the kernel will spread the file system buffers (page cache) evenly
 over all the nodes that the faulting task is allowed to use, instead
 of preferring to put those pages on the node where the task is running.
 
-If the per-cpuset boolean flag file 'memory_spread_slab' is set,
+If the per-cpuset boolean flag file 'cpuset.memory_spread_slab' is set,
 then the kernel will spread some file system related slab caches,
 such as for inodes and dentries evenly over all the nodes that the
 faulting task is allowed to use, instead of preferring to put those
@@ -337,21 +337,21 @@ their containing tasks memory spread settings.  If memory spreading
 is turned off, then the currently specified NUMA mempolicy once again
 applies to memory page allocations.
 
-Both 'memory_spread_page' and 'memory_spread_slab' are boolean flag
+Both 'cpuset.memory_spread_page' and 'cpuset.memory_spread_slab' are boolean flag
 files.  By default they contain "0", meaning that the feature is off
 for that cpuset.  If a "1" is written to that file, then that turns
 the named feature on.
 
 The implementation is simple.
 
-Setting the flag 'memory_spread_page' turns on a per-process flag
+Setting the flag 'cpuset.memory_spread_page' turns on a per-process flag
 PF_SPREAD_PAGE for each task that is in that cpuset or subsequently
 joins that cpuset.  The page allocation calls for the page cache
 is modified to perform an inline check for this PF_SPREAD_PAGE task
 flag, and if set, a call to a new routine cpuset_mem_spread_node()
 returns the node to prefer for the allocation.
 
-Similarly, setting 'memory_spread_slab' turns on the flag
+Similarly, setting 'cpuset.memory_spread_slab' turns on the flag
 PF_SPREAD_SLAB, and appropriately marked slab caches will allocate
 pages from the node returned by cpuset_mem_spread_node().
 
@@ -404,24 +404,24 @@ the following two situations:
     system overhead on those CPUs, including avoiding task load
     balancing if that is not needed.
 
-When the per-cpuset flag "sched_load_balance" is enabled (the default
-setting), it requests that all the CPUs in that cpusets allowed 'cpus'
+When the per-cpuset flag "cpuset.sched_load_balance" is enabled (the default
+setting), it requests that all the CPUs in that cpusets allowed 'cpuset.cpus'
 be contained in a single sched domain, ensuring that load balancing
 can move a task (not otherwised pinned, as by sched_setaffinity)
 from any CPU in that cpuset to any other.
 
-When the per-cpuset flag "sched_load_balance" is disabled, then the
+When the per-cpuset flag "cpuset.sched_load_balance" is disabled, then the
 scheduler will avoid load balancing across the CPUs in that cpuset,
 --except-- in so far as is necessary because some overlapping cpuset
 has "sched_load_balance" enabled.
 
-So, for example, if the top cpuset has the flag "sched_load_balance"
+So, for example, if the top cpuset has the flag "cpuset.sched_load_balance"
 enabled, then the scheduler will have one sched domain covering all
-CPUs, and the setting of the "sched_load_balance" flag in any other
+CPUs, and the setting of the "cpuset.sched_load_balance" flag in any other
 cpusets won't matter, as we're already fully load balancing.
 
 Therefore in the above two situations, the top cpuset flag
-"sched_load_balance" should be disabled, and only some of the smaller,
+"cpuset.sched_load_balance" should be disabled, and only some of the smaller,
 child cpusets have this flag enabled.
 
 When doing this, you don't usually want to leave any unpinned tasks in
@@ -433,7 +433,7 @@ scheduler might not consider the possibility of load balancing that
 task to that underused CPU.
 
 Of course, tasks pinned to a particular CPU can be left in a cpuset
-that disables "sched_load_balance" as those tasks aren't going anywhere
+that disables "cpuset.sched_load_balance" as those tasks aren't going anywhere
 else anyway.
 
 There is an impedance mismatch here, between cpusets and sched domains.
@@ -443,19 +443,19 @@ overlap and each CPU is in at most one sched domain.
 It is necessary for sched domains to be flat because load balancing
 across partially overlapping sets of CPUs would risk unstable dynamics
 that would be beyond our understanding.  So if each of two partially
-overlapping cpusets enables the flag 'sched_load_balance', then we
+overlapping cpusets enables the flag 'cpuset.sched_load_balance', then we
 form a single sched domain that is a superset of both.  We won't move
 a task to a CPU outside it cpuset, but the scheduler load balancing
 code might waste some compute cycles considering that possibility.
 
 This mismatch is why there is not a simple one-to-one relation
-between which cpusets have the flag "sched_load_balance" enabled,
+between which cpusets have the flag "cpuset.sched_load_balance" enabled,
 and the sched domain configuration.  If a cpuset enables the flag, it
 will get balancing across all its CPUs, but if it disables the flag,
 it will only be assured of no load balancing if no other overlapping
 cpuset enables the flag.
 
-If two cpusets have partially overlapping 'cpus' allowed, and only
+If two cpusets have partially overlapping 'cpuset.cpus' allowed, and only
 one of them has this flag enabled, then the other may find its
 tasks only partially load balanced, just on the overlapping CPUs.
 This is just the general case of the top_cpuset example given a few
@@ -468,23 +468,23 @@ load balancing to the other CPUs.
 1.7.1 sched_load_balance implementation details.
 ------------------------------------------------
 
-The per-cpuset flag 'sched_load_balance' defaults to enabled (contrary
+The per-cpuset flag 'cpuset.sched_load_balance' defaults to enabled (contrary
 to most cpuset flags.)  When enabled for a cpuset, the kernel will
 ensure that it can load balance across all the CPUs in that cpuset
 (makes sure that all the CPUs in the cpus_allowed of that cpuset are
 in the same sched domain.)
 
-If two overlapping cpusets both have 'sched_load_balance' enabled,
+If two overlapping cpusets both have 'cpuset.sched_load_balance' enabled,
 then they will be (must be) both in the same sched domain.
 
-If, as is the default, the top cpuset has 'sched_load_balance' enabled,
+If, as is the default, the top cpuset has 'cpuset.sched_load_balance' enabled,
 then by the above that means there is a single sched domain covering
 the whole system, regardless of any other cpuset settings.
 
 The kernel commits to user space that it will avoid load balancing
 where it can.  It will pick as fine a granularity partition of sched
 domains as it can while still providing load balancing for any set
-of CPUs allowed to a cpuset having 'sched_load_balance' enabled.
+of CPUs allowed to a cpuset having 'cpuset.sched_load_balance' enabled.
 
 The internal kernel cpuset to scheduler interface passes from the
 cpuset code to the scheduler code a partition of the load balanced
@@ -495,9 +495,9 @@ all the CPUs that must be load balanced.
 The cpuset code builds a new such partition and passes it to the
 scheduler sched domain setup code, to have the sched domains rebuilt
 as necessary, whenever:
- - the 'sched_load_balance' flag of a cpuset with non-empty CPUs changes,
+ - the 'cpuset.sched_load_balance' flag of a cpuset with non-empty CPUs changes,
  - or CPUs come or go from a cpuset with this flag enabled,
- - or 'sched_relax_domain_level' value of a cpuset with non-empty CPUs
+ - or 'cpuset.sched_relax_domain_level' value of a cpuset with non-empty CPUs
    and with this flag enabled changes,
  - or a cpuset with non-empty CPUs and with this flag enabled is removed,
  - or a cpu is offlined/onlined.
@@ -542,7 +542,7 @@ As the result, task B on CPU X need to wait task A or wait load balance
 on the next tick.  For some applications in special situation, waiting
 1 tick may be too long.
 
-The 'sched_relax_domain_level' file allows you to request changing
+The 'cpuset.sched_relax_domain_level' file allows you to request changing
 this searching range as you like.  This file takes int value which
 indicates size of searching range in levels ideally as follows,
 otherwise initial value -1 that indicates the cpuset has no request.
@@ -559,8 +559,8 @@ The system default is architecture dependent.  The system default
 can be changed using the relax_domain_level= boot parameter.
 
 This file is per-cpuset and affect the sched domain where the cpuset
-belongs to.  Therefore if the flag 'sched_load_balance' of a cpuset
-is disabled, then 'sched_relax_domain_level' have no effect since
+belongs to.  Therefore if the flag 'cpuset.sched_load_balance' of a cpuset
+is disabled, then 'cpuset.sched_relax_domain_level' have no effect since
 there is no sched domain belonging the cpuset.
 
 If multiple cpusets are overlapping and hence they form a single sched
@@ -607,9 +607,9 @@ from one cpuset to another, then the kernel will adjust the tasks
 memory placement, as above, the next time that the kernel attempts
 to allocate a page of memory for that task.
 
-If a cpuset has its 'cpus' modified, then each task in that cpuset
+If a cpuset has its 'cpuset.cpus' modified, then each task in that cpuset
 will have its allowed CPU placement changed immediately.  Similarly,
-if a tasks pid is written to another cpusets 'tasks' file, then its
+if a tasks pid is written to another cpusets 'cpuset.tasks' file, then its
 allowed CPU placement is changed immediately.  If such a task had been
 bound to some subset of its cpuset using the sched_setaffinity() call,
 the task will be allowed to run on any CPU allowed in its new cpuset,
@@ -622,8 +622,8 @@ and the processor placement is updated immediately.
 Normally, once a page is allocated (given a physical page
 of main memory) then that page stays on whatever node it
 was allocated, so long as it remains allocated, even if the
-cpusets memory placement policy 'mems' subsequently changes.
-If the cpuset flag file 'memory_migrate' is set true, then when
+cpusets memory placement policy 'cpuset.mems' subsequently changes.
+If the cpuset flag file 'cpuset.memory_migrate' is set true, then when
 tasks are attached to that cpuset, any pages that task had
 allocated to it on nodes in its previous cpuset are migrated
 to the tasks new cpuset. The relative placement of the page within
@@ -631,12 +631,12 @@ the cpuset is preserved during these migration operations if possible.
 For example if the page was on the second valid node of the prior cpuset
 then the page will be placed on the second valid node of the new cpuset.
 
-Also if 'memory_migrate' is set true, then if that cpusets
-'mems' file is modified, pages allocated to tasks in that
-cpuset, that were on nodes in the previous setting of 'mems',
+Also if 'cpuset.memory_migrate' is set true, then if that cpusets
+'cpuset.mems' file is modified, pages allocated to tasks in that
+cpuset, that were on nodes in the previous setting of 'cpuset.mems',
 will be moved to nodes in the new setting of 'mems.'
 Pages that were not in the tasks prior cpuset, or in the cpusets
-prior 'mems' setting, will not be moved.
+prior 'cpuset.mems' setting, will not be moved.
 
 There is an exception to the above.  If hotplug functionality is used
 to remove all the CPUs that are currently assigned to a cpuset,
@@ -678,8 +678,8 @@ and then start a subshell 'sh' in that cpuset:
   cd /dev/cpuset
   mkdir Charlie
   cd Charlie
-  /bin/echo 2-3 > cpus
-  /bin/echo 1 > mems
+  /bin/echo 2-3 > cpuset.cpus
+  /bin/echo 1 > cpuset.mems
   /bin/echo $$ > tasks
   sh
   # The subshell 'sh' is now running in cpuset Charlie
@@ -725,10 +725,13 @@ Now you want to do something with this cpuset.
 
 In this directory you can find several files:
 # ls
-cpu_exclusive  memory_migrate      mems                      tasks
-cpus           memory_pressure     notify_on_release
-mem_exclusive  memory_spread_page  sched_load_balance
-mem_hardwall   memory_spread_slab  sched_relax_domain_level
+cpuset.cpu_exclusive       cpuset.memory_spread_slab
+cpuset.cpus                cpuset.mems
+cpuset.mem_exclusive       cpuset.sched_load_balance
+cpuset.mem_hardwall        cpuset.sched_relax_domain_level
+cpuset.memory_migrate      notify_on_release
+cpuset.memory_pressure     tasks
+cpuset.memory_spread_page
 
 Reading them will give you information about the state of this cpuset:
 the CPUs and Memory Nodes it can use, the processes that are using
@@ -736,13 +739,13 @@ it, its properties.  By writing to these files you can manipulate
 the cpuset.
 
 Set some flags:
-# /bin/echo 1 > cpu_exclusive
+# /bin/echo 1 > cpuset.cpu_exclusive
 
 Add some cpus:
-# /bin/echo 0-7 > cpus
+# /bin/echo 0-7 > cpuset.cpus
 
 Add some mems:
-# /bin/echo 0-7 > mems
+# /bin/echo 0-7 > cpuset.mems
 
 Now attach your shell to this cpuset:
 # /bin/echo $$ > tasks
@@ -774,28 +777,28 @@ echo "/sbin/cpuset_release_agent" > /dev/cpuset/release_agent
 This is the syntax to use when writing in the cpus or mems files
 in cpuset directories:
 
-# /bin/echo 1-4 > cpus		-> set cpus list to cpus 1,2,3,4
-# /bin/echo 1,2,3,4 > cpus	-> set cpus list to cpus 1,2,3,4
+# /bin/echo 1-4 > cpuset.cpus		-> set cpus list to cpus 1,2,3,4
+# /bin/echo 1,2,3,4 > cpuset.cpus	-> set cpus list to cpus 1,2,3,4
 
 To add a CPU to a cpuset, write the new list of CPUs including the
 CPU to be added. To add 6 to the above cpuset:
 
-# /bin/echo 1-4,6 > cpus	-> set cpus list to cpus 1,2,3,4,6
+# /bin/echo 1-4,6 > cpuset.cpus	-> set cpus list to cpus 1,2,3,4,6
 
 Similarly to remove a CPU from a cpuset, write the new list of CPUs
 without the CPU to be removed.
 
 To remove all the CPUs:
 
-# /bin/echo "" > cpus		-> clear cpus list
+# /bin/echo "" > cpuset.cpus		-> clear cpus list
 
 2.3 Setting flags
 -----------------
 
 The syntax is very simple:
 
-# /bin/echo 1 > cpu_exclusive 	-> set flag 'cpu_exclusive'
-# /bin/echo 0 > cpu_exclusive 	-> unset flag 'cpu_exclusive'
+# /bin/echo 1 > cpuset.cpu_exclusive 	-> set flag 'cpuset.cpu_exclusive'
+# /bin/echo 0 > cpuset.cpu_exclusive 	-> unset flag 'cpuset.cpu_exclusive'
 
 2.4 Attaching processes
 -----------------------
diff --git a/Documentation/cgroups/memcg_test.txt b/Documentation/cgroups/memcg_test.txt
index 72db89ed0609..f7f68b2ac199 100644
--- a/Documentation/cgroups/memcg_test.txt
+++ b/Documentation/cgroups/memcg_test.txt
@@ -1,6 +1,6 @@
 Memory Resource Controller(Memcg)  Implementation Memo.
-Last Updated: 2009/1/20
-Base Kernel Version: based on 2.6.29-rc2.
+Last Updated: 2010/2
+Base Kernel Version: based on 2.6.33-rc7-mm(candidate for 34).
 
 Because VM is getting complex (one of reasons is memcg...), memcg's behavior
 is complex. This is a document for memcg's internal behavior.
@@ -337,7 +337,7 @@ Under below explanation, we assume CONFIG_MEM_RES_CTRL_SWAP=y.
 	race and lock dependency with other cgroup subsystems.
 
 	example)
-	# mount -t cgroup none /cgroup -t cpuset,memory,cpu,devices
+	# mount -t cgroup none /cgroup -o cpuset,memory,cpu,devices
 
 	and do task move, mkdir, rmdir etc...under this.
 
@@ -348,7 +348,7 @@ Under below explanation, we assume CONFIG_MEM_RES_CTRL_SWAP=y.
 
 	For example, test like following is good.
 	(Shell-A)
-	# mount -t cgroup none /cgroup -t memory
+	# mount -t cgroup none /cgroup -o memory
 	# mkdir /cgroup/test
 	# echo 40M > /cgroup/test/memory.limit_in_bytes
 	# echo 0 > /cgroup/test/tasks
@@ -378,3 +378,42 @@ Under below explanation, we assume CONFIG_MEM_RES_CTRL_SWAP=y.
 	#echo 50M > memory.limit_in_bytes
 	#echo 50M > memory.memsw.limit_in_bytes
 	run 51M of malloc
+
+ 9.9 Move charges at task migration
+	Charges associated with a task can be moved along with task migration.
+
+	(Shell-A)
+	#mkdir /cgroup/A
+	#echo $$ >/cgroup/A/tasks
+	run some programs which uses some amount of memory in /cgroup/A.
+
+	(Shell-B)
+	#mkdir /cgroup/B
+	#echo 1 >/cgroup/B/memory.move_charge_at_immigrate
+	#echo "pid of the program running in group A" >/cgroup/B/tasks
+
+	You can see charges have been moved by reading *.usage_in_bytes or
+	memory.stat of both A and B.
+	See 8.2 of Documentation/cgroups/memory.txt to see what value should be
+	written to move_charge_at_immigrate.
+
+ 9.10 Memory thresholds
+	Memory controler implements memory thresholds using cgroups notification
+	API. You can use Documentation/cgroups/cgroup_event_listener.c to test
+	it.
+
+	(Shell-A) Create cgroup and run event listener
+	# mkdir /cgroup/A
+	# ./cgroup_event_listener /cgroup/A/memory.usage_in_bytes 5M
+
+	(Shell-B) Add task to cgroup and try to allocate and free memory
+	# echo $$ >/cgroup/A/tasks
+	# a="$(dd if=/dev/zero bs=1M count=10)"
+	# a=
+
+	You will see message from cgroup_event_listener every time you cross
+	the thresholds.
+
+	Use /cgroup/A/memory.memsw.usage_in_bytes to test memsw thresholds.
+
+	It's good idea to test root cgroup as well.
diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt
index b871f2552b45..f8bc802d70b9 100644
--- a/Documentation/cgroups/memory.txt
+++ b/Documentation/cgroups/memory.txt
@@ -182,6 +182,8 @@ list.
 NOTE: Reclaim does not work for the root cgroup, since we cannot set any
 limits on the root cgroup.
 
+Note2: When panic_on_oom is set to "2", the whole system will panic.
+
 2. Locking
 
 The memory controller uses the following hierarchy
@@ -262,10 +264,12 @@ some of the pages cached in the cgroup (page cache pages).
 4.2 Task migration
 
 When a task migrates from one cgroup to another, it's charge is not
-carried forward. The pages allocated from the original cgroup still
+carried forward by default. The pages allocated from the original cgroup still
 remain charged to it, the charge is dropped when the page is freed or
 reclaimed.
 
+Note: You can move charges of a task along with task migration. See 8.
+
 4.3 Removing a cgroup
 
 A cgroup can be removed by rmdir, but as discussed in sections 4.1 and 4.2, a
@@ -377,7 +381,8 @@ The feature can be disabled by
 NOTE1: Enabling/disabling will fail if the cgroup already has other
 cgroups created below it.
 
-NOTE2: This feature can be enabled/disabled per subtree.
+NOTE2: When panic_on_oom is set to "2", the whole system will panic in
+case of an oom event in any cgroup.
 
 7. Soft limits
 
@@ -414,7 +419,76 @@ NOTE1: Soft limits take effect over a long period of time, since they involve
 NOTE2: It is recommended to set the soft limit always below the hard limit,
        otherwise the hard limit will take precedence.
 
-8. TODO
+8. Move charges at task migration
+
+Users can move charges associated with a task along with task migration, that
+is, uncharge task's pages from the old cgroup and charge them to the new cgroup.
+This feature is not supported in !CONFIG_MMU environments because of lack of
+page tables.
+
+8.1 Interface
+
+This feature is disabled by default. It can be enabled(and disabled again) by
+writing to memory.move_charge_at_immigrate of the destination cgroup.
+
+If you want to enable it:
+
+# echo (some positive value) > memory.move_charge_at_immigrate
+
+Note: Each bits of move_charge_at_immigrate has its own meaning about what type
+      of charges should be moved. See 8.2 for details.
+Note: Charges are moved only when you move mm->owner, IOW, a leader of a thread
+      group.
+Note: If we cannot find enough space for the task in the destination cgroup, we
+      try to make space by reclaiming memory. Task migration may fail if we
+      cannot make enough space.
+Note: It can take several seconds if you move charges in giga bytes order.
+
+And if you want disable it again:
+
+# echo 0 > memory.move_charge_at_immigrate
+
+8.2 Type of charges which can be move
+
+Each bits of move_charge_at_immigrate has its own meaning about what type of
+charges should be moved.
+
+  bit | what type of charges would be moved ?
+ -----+------------------------------------------------------------------------
+   0  | A charge of an anonymous page(or swap of it) used by the target task.
+      | Those pages and swaps must be used only by the target task. You must
+      | enable Swap Extension(see 2.4) to enable move of swap charges.
+
+Note: Those pages and swaps must be charged to the old cgroup.
+Note: More type of pages(e.g. file cache, shmem,) will be supported by other
+      bits in future.
+
+8.3 TODO
+
+- Add support for other types of pages(e.g. file cache, shmem, etc.).
+- Implement madvise(2) to let users decide the vma to be moved or not to be
+  moved.
+- All of moving charge operations are done under cgroup_mutex. It's not good
+  behavior to hold the mutex too long, so we may need some trick.
+
+9. Memory thresholds
+
+Memory controler implements memory thresholds using cgroups notification
+API (see cgroups.txt). It allows to register multiple memory and memsw
+thresholds and gets notifications when it crosses.
+
+To register a threshold application need:
+ - create an eventfd using eventfd(2);
+ - open memory.usage_in_bytes or memory.memsw.usage_in_bytes;
+ - write string like "<event_fd> <memory.usage_in_bytes> <threshold>" to
+   cgroup.event_control.
+
+Application will be notified through eventfd when memory usage crosses
+threshold in any direction.
+
+It's applicable for root and non-root cgroup.
+
+10. TODO
 
 1. Add support for accounting huge pages (as a separate controller)
 2. Make per-cgroup scanner reclaim not-shared pages first
diff --git a/Documentation/console/console.txt b/Documentation/console/console.txt
index 877a1b26cc3d..926cf1b5e63e 100644
--- a/Documentation/console/console.txt
+++ b/Documentation/console/console.txt
@@ -74,7 +74,7 @@ driver takes over the consoles vacated by the driver. Binding, on the other
 hand, will bind the driver to the consoles that are currently occupied by a
 system driver.
 
-NOTE1: Binding and binding must be selected in Kconfig. It's under:
+NOTE1: Binding and unbinding must be selected in Kconfig. It's under:
 
 Device Drivers -> Character devices -> Support for binding and unbinding
 console drivers
diff --git a/Documentation/driver-model/platform.txt b/Documentation/driver-model/platform.txt
index 2e2c2ea90ceb..41f41632ee55 100644
--- a/Documentation/driver-model/platform.txt
+++ b/Documentation/driver-model/platform.txt
@@ -192,7 +192,7 @@ command line. This will execute all matching early_param() callbacks.
 User specified early platform devices will be registered at this point.
 For the early serial console case the user can specify port on the
 kernel command line as "earlyprintk=serial.0" where "earlyprintk" is
-the class string, "serial" is the name of the platfrom driver and
+the class string, "serial" is the name of the platform driver and
 0 is the platform device id. If the id is -1 then the dot and the
 id can be omitted.
 
diff --git a/Documentation/eisa.txt b/Documentation/eisa.txt
index 60e361ba08c0..f297fc1202ae 100644
--- a/Documentation/eisa.txt
+++ b/Documentation/eisa.txt
@@ -171,7 +171,7 @@ device.
 virtual_root.force_probe :
 
 Force the probing code to probe EISA slots even when it cannot find an
-EISA compliant mainboard (nothing appears on slot 0). Defaultd to 0
+EISA compliant mainboard (nothing appears on slot 0). Defaults to 0
 (don't force), and set to 1 (force probing) when either
 CONFIG_ALPHA_JENSEN or CONFIG_EISA_VLB_PRIMING are set.
 
diff --git a/Documentation/email-clients.txt b/Documentation/email-clients.txt
index a618efab7b15..945ff3fda433 100644
--- a/Documentation/email-clients.txt
+++ b/Documentation/email-clients.txt
@@ -216,26 +216,14 @@ Works.  Use "Insert file..." or external editor.
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 Gmail (Web GUI)
 
-If you just have to use Gmail to send patches, it CAN be made to work.  It
-requires a bit of external help, though.
-
-The first problem is that Gmail converts tabs to spaces.  This will
-totally break your patches.  To prevent this, you have to use a different
-editor.  There is a firefox extension called "ViewSourceWith"
-(https://addons.mozilla.org/en-US/firefox/addon/394) which allows you to
-edit any text box in the editor of your choice.  Configure it to launch
-your favorite editor.  When you want to send a patch, use this technique.
-Once you have crafted your messsage + patch, save and exit the editor,
-which should reload the Gmail edit box.  GMAIL WILL PRESERVE THE TABS.
-Hoorah.  Apparently you can cut-n-paste literal tabs, but Gmail will
-convert those to spaces upon sending!
-
-The second problem is that Gmail converts tabs to spaces on replies.  If
-you reply to a patch, don't expect to be able to apply it as a patch.
-
-The last problem is that Gmail will base64-encode any message that has a
-non-ASCII character.  That includes things like European names.  Be aware.
-
-Gmail is not convenient for lkml patches, but CAN be made to work.
+Does not work for sending patches.
+
+Gmail web client converts tabs to spaces automatically.
+
+At the same time it wraps lines every 78 chars with CRLF style line breaks
+although tab2space problem can be solved with external editor.
+
+Another problem is that Gmail will base64-encode any message that has a
+non-ASCII character. That includes things like European names.
 
                                 ###
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index a5cc0db63d7a..ed511af0f79a 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -582,3 +582,10 @@ Why:	The paravirt mmu host support is slower than non-paravirt mmu, both
 Who:	Avi Kivity <avi@redhat.com>
 
 ----------------------------
+
+What: 	"acpi=ht" boot option
+When:	2.6.35
+Why:	Useful in 2003, implementation is a hack.
+	Generally invoked by accident today.
+	Seen as doing more harm than good.
+Who:	Len Brown <len.brown@intel.com>
diff --git a/Documentation/filesystems/00-INDEX b/Documentation/filesystems/00-INDEX
index 5139b8c9d5af..3bae418c6ad3 100644
--- a/Documentation/filesystems/00-INDEX
+++ b/Documentation/filesystems/00-INDEX
@@ -32,6 +32,8 @@ dlmfs.txt
 	- info on the userspace interface to the OCFS2 DLM.
 dnotify.txt
 	- info about directory notification in Linux.
+dnotify_test.c
+	- example program for dnotify
 ecryptfs.txt
 	- docs on eCryptfs: stacked cryptographic filesystem for Linux.
 exofs.txt
diff --git a/Documentation/filesystems/Makefile b/Documentation/filesystems/Makefile
new file mode 100644
index 000000000000..a5dd114da14f
--- /dev/null
+++ b/Documentation/filesystems/Makefile
@@ -0,0 +1,8 @@
+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := dnotify_test
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
diff --git a/Documentation/filesystems/ceph.txt b/Documentation/filesystems/ceph.txt
new file mode 100644
index 000000000000..6e03917316bd
--- /dev/null
+++ b/Documentation/filesystems/ceph.txt
@@ -0,0 +1,139 @@
+Ceph Distributed File System
+============================
+
+Ceph is a distributed network file system designed to provide good
+performance, reliability, and scalability.
+
+Basic features include:
+
+ * POSIX semantics
+ * Seamless scaling from 1 to many thousands of nodes
+ * High availability and reliability.  No single points of failure.
+ * N-way replication of data across storage nodes
+ * Fast recovery from node failures
+ * Automatic rebalancing of data on node addition/removal
+ * Easy deployment: most FS components are userspace daemons
+
+Also,
+ * Flexible snapshots (on any directory)
+ * Recursive accounting (nested files, directories, bytes)
+
+In contrast to cluster filesystems like GFS, OCFS2, and GPFS that rely
+on symmetric access by all clients to shared block devices, Ceph
+separates data and metadata management into independent server
+clusters, similar to Lustre.  Unlike Lustre, however, metadata and
+storage nodes run entirely as user space daemons.  Storage nodes
+utilize btrfs to store data objects, leveraging its advanced features
+(checksumming, metadata replication, etc.).  File data is striped
+across storage nodes in large chunks to distribute workload and
+facilitate high throughputs.  When storage nodes fail, data is
+re-replicated in a distributed fashion by the storage nodes themselves
+(with some minimal coordination from a cluster monitor), making the
+system extremely efficient and scalable.
+
+Metadata servers effectively form a large, consistent, distributed
+in-memory cache above the file namespace that is extremely scalable,
+dynamically redistributes metadata in response to workload changes,
+and can tolerate arbitrary (well, non-Byzantine) node failures.  The
+metadata server takes a somewhat unconventional approach to metadata
+storage to significantly improve performance for common workloads.  In
+particular, inodes with only a single link are embedded in
+directories, allowing entire directories of dentries and inodes to be
+loaded into its cache with a single I/O operation.  The contents of
+extremely large directories can be fragmented and managed by
+independent metadata servers, allowing scalable concurrent access.
+
+The system offers automatic data rebalancing/migration when scaling
+from a small cluster of just a few nodes to many hundreds, without
+requiring an administrator carve the data set into static volumes or
+go through the tedious process of migrating data between servers.
+When the file system approaches full, new nodes can be easily added
+and things will "just work."
+
+Ceph includes flexible snapshot mechanism that allows a user to create
+a snapshot on any subdirectory (and its nested contents) in the
+system.  Snapshot creation and deletion are as simple as 'mkdir
+.snap/foo' and 'rmdir .snap/foo'.
+
+Ceph also provides some recursive accounting on directories for nested
+files and bytes.  That is, a 'getfattr -d foo' on any directory in the
+system will reveal the total number of nested regular files and
+subdirectories, and a summation of all nested file sizes.  This makes
+the identification of large disk space consumers relatively quick, as
+no 'du' or similar recursive scan of the file system is required.
+
+
+Mount Syntax
+============
+
+The basic mount syntax is:
+
+ # mount -t ceph monip[:port][,monip2[:port]...]:/[subdir] mnt
+
+You only need to specify a single monitor, as the client will get the
+full list when it connects.  (However, if the monitor you specify
+happens to be down, the mount won't succeed.)  The port can be left
+off if the monitor is using the default.  So if the monitor is at
+1.2.3.4,
+
+ # mount -t ceph 1.2.3.4:/ /mnt/ceph
+
+is sufficient.  If /sbin/mount.ceph is installed, a hostname can be
+used instead of an IP address.
+
+
+
+Mount Options
+=============
+
+  ip=A.B.C.D[:N]
+	Specify the IP and/or port the client should bind to locally.
+	There is normally not much reason to do this.  If the IP is not
+	specified, the client's IP address is determined by looking at the
+	address it's connection to the monitor originates from.
+
+  wsize=X
+	Specify the maximum write size in bytes.  By default there is no
+	maximu.  Ceph will normally size writes based on the file stripe
+	size.
+
+  rsize=X
+	Specify the maximum readahead.
+
+  mount_timeout=X
+	Specify the timeout value for mount (in seconds), in the case
+	of a non-responsive Ceph file system.  The default is 30
+	seconds.
+
+  rbytes
+	When stat() is called on a directory, set st_size to 'rbytes',
+	the summation of file sizes over all files nested beneath that
+	directory.  This is the default.
+
+  norbytes
+	When stat() is called on a directory, set st_size to the
+	number of entries in that directory.
+
+  nocrc
+	Disable CRC32C calculation for data writes.  If set, the OSD
+	must rely on TCP's error correction to detect data corruption
+	in the data payload.
+
+  noasyncreaddir
+	Disable client's use its local cache to satisfy	readdir
+	requests.  (This does not change correctness; the client uses
+	cached metadata only when a lease or capability ensures it is
+	valid.)
+
+
+More Information
+================
+
+For more information on Ceph, see the home page at
+	http://ceph.newdream.net/
+
+The Linux kernel client source tree is available at
+	git://ceph.newdream.net/linux-ceph-client.git
+
+and the source for the full system is at
+	git://ceph.newdream.net/ceph.git
diff --git a/Documentation/filesystems/dnotify.txt b/Documentation/filesystems/dnotify.txt
index 9f5d338ddbb8..6baf88f46859 100644
--- a/Documentation/filesystems/dnotify.txt
+++ b/Documentation/filesystems/dnotify.txt
@@ -62,38 +62,9 @@ disabled, fcntl(fd, F_NOTIFY, ...) will return -EINVAL.
 
 Example
 -------
+See Documentation/filesystems/dnotify_test.c for an example.
 
-	#define _GNU_SOURCE	/* needed to get the defines */
-	#include <fcntl.h>	/* in glibc 2.2 this has the needed
-					   values defined */
-	#include <signal.h>
-	#include <stdio.h>
-	#include <unistd.h>
-
-	static volatile int event_fd;
-
-	static void handler(int sig, siginfo_t *si, void *data)
-	{
-		event_fd = si->si_fd;
-	}
-
-	int main(void)
-	{
-		struct sigaction act;
-		int fd;
-
-		act.sa_sigaction = handler;
-		sigemptyset(&act.sa_mask);
-		act.sa_flags = SA_SIGINFO;
-		sigaction(SIGRTMIN + 1, &act, NULL);
-
-		fd = open(".", O_RDONLY);
-		fcntl(fd, F_SETSIG, SIGRTMIN + 1);
-		fcntl(fd, F_NOTIFY, DN_MODIFY|DN_CREATE|DN_MULTISHOT);
-		/* we will now be notified if any of the files
-		   in "." is modified or new files are created */
-		while (1) {
-			pause();
-			printf("Got event on fd=%d\n", event_fd);
-		}
-	}
+NOTE
+----
+Beginning with Linux 2.6.13, dnotify has been replaced by inotify.
+See Documentation/filesystems/inotify.txt for more information on it.
diff --git a/Documentation/filesystems/dnotify_test.c b/Documentation/filesystems/dnotify_test.c
new file mode 100644
index 000000000000..8b37b4a1e18d
--- /dev/null
+++ b/Documentation/filesystems/dnotify_test.c
@@ -0,0 +1,34 @@
+#define _GNU_SOURCE	/* needed to get the defines */
+#include <fcntl.h>	/* in glibc 2.2 this has the needed
+				   values defined */
+#include <signal.h>
+#include <stdio.h>
+#include <unistd.h>
+
+static volatile int event_fd;
+
+static void handler(int sig, siginfo_t *si, void *data)
+{
+	event_fd = si->si_fd;
+}
+
+int main(void)
+{
+	struct sigaction act;
+	int fd;
+
+	act.sa_sigaction = handler;
+	sigemptyset(&act.sa_mask);
+	act.sa_flags = SA_SIGINFO;
+	sigaction(SIGRTMIN + 1, &act, NULL);
+
+	fd = open(".", O_RDONLY);
+	fcntl(fd, F_SETSIG, SIGRTMIN + 1);
+	fcntl(fd, F_NOTIFY, DN_MODIFY|DN_CREATE|DN_MULTISHOT);
+	/* we will now be notified if any of the files
+	   in "." is modified or new files are created */
+	while (1) {
+		pause();
+		printf("Got event on fd=%d\n", event_fd);
+	}
+}
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index 96a44dd95e03..a4f30faa4f1f 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -195,7 +195,7 @@ asynchronous manner and the vaule may not be very precise. To see a precise
 snapshot of a moment, you can see /proc/<pid>/smaps file and scan page table.
 It's slow but very precise.
 
-Table 1-2: Contents of the statm files (as of 2.6.30-rc7)
+Table 1-2: Contents of the status files (as of 2.6.30-rc7)
 ..............................................................................
  Field                       Content
  Name                        filename of the executable
diff --git a/Documentation/hwmon/abituguru b/Documentation/hwmon/abituguru
index 87ffa0f5ec70..5eb3b9d5f0d5 100644
--- a/Documentation/hwmon/abituguru
+++ b/Documentation/hwmon/abituguru
@@ -30,7 +30,7 @@ Supported chips:
 	   bank1_types=1,1,0,0,0,0,0,2,0,0,0,0,2,0,0,1
 	   You may also need to specify the fan_sensors option for these boards
 	   fan_sensors=5
-	2) There is a seperate abituguru3 driver for these motherboards,
+	2) There is a separate abituguru3 driver for these motherboards,
 	   the abituguru (without the 3 !) driver will not work on these
 	   motherboards (and visa versa)!
 
diff --git a/Documentation/input/rotary-encoder.txt b/Documentation/input/rotary-encoder.txt
index 3a6aec40c0b0..8b4129de1d2d 100644
--- a/Documentation/input/rotary-encoder.txt
+++ b/Documentation/input/rotary-encoder.txt
@@ -75,7 +75,7 @@ and the number of steps or will clamp at the maximum and zero depending on
 the configuration.
 
 Because GPIO to IRQ mapping is platform specific, this information must
-be given in seperately to the driver. See the example below.
+be given in separately to the driver. See the example below.
 
 ---------<snip>---------
 
diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt
index 35c9b51d20ea..dd5806f4fcc4 100644
--- a/Documentation/ioctl/ioctl-number.txt
+++ b/Documentation/ioctl/ioctl-number.txt
@@ -291,6 +291,7 @@ Code  Seq#(hex)	Include File		Comments
 0x92	00-0F	drivers/usb/mon/mon_bin.c
 0x93	60-7F	linux/auto_fs.h
 0x94	all	fs/btrfs/ioctl.h
+0x97	00-7F	fs/ceph/ioctl.h		Ceph file system
 0x99	00-0F				537-Addinboard driver
 					<mailto:buk@buks.ipn.de>
 0xA0	all	linux/sdp/sdp.h		Industrial Device Project
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 3bc48b0bd3a9..e4cbca58536c 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -200,10 +200,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			acpi_display_output=video
 			See above.
 
-	acpi_early_pdc_eval	[HW,ACPI] Evaluate processor _PDC methods
-				early. Needed on some platforms to properly
-				initialize the EC.
-
 	acpi_irq_balance [HW,ACPI]
 			ACPI will balance active IRQs
 			default in APIC mode
diff --git a/Documentation/kobject.txt b/Documentation/kobject.txt
index c79ab996dada..3ab2472509cb 100644
--- a/Documentation/kobject.txt
+++ b/Documentation/kobject.txt
@@ -59,37 +59,56 @@ nice to have in other objects.  The C language does not allow for the
 direct expression of inheritance, so other techniques - such as structure
 embedding - must be used.
 
-So, for example, the UIO code has a structure that defines the memory
-region associated with a uio device:
+(As an aside, for those familiar with the kernel linked list implementation,
+this is analogous as to how "list_head" structs are rarely useful on
+their own, but are invariably found embedded in the larger objects of
+interest.)
 
-struct uio_mem {
+So, for example, the UIO code in drivers/uio/uio.c has a structure that
+defines the memory region associated with a uio device:
+
+    struct uio_map {
 	struct kobject kobj;
-	unsigned long addr;
-	unsigned long size;
-	int memtype;
-	void __iomem *internal_addr;
-};
+	struct uio_mem *mem;
+    };
 
-If you have a struct uio_mem structure, finding its embedded kobject is
+If you have a struct uio_map structure, finding its embedded kobject is
 just a matter of using the kobj member.  Code that works with kobjects will
 often have the opposite problem, however: given a struct kobject pointer,
 what is the pointer to the containing structure?  You must avoid tricks
 (such as assuming that the kobject is at the beginning of the structure)
 and, instead, use the container_of() macro, found in <linux/kernel.h>:
 
-	container_of(pointer, type, member)
+    container_of(pointer, type, member)
+
+where:
+
+  * "pointer" is the pointer to the embedded kobject,
+  * "type" is the type of the containing structure, and
+  * "member" is the name of the structure field to which "pointer" points.
+
+The return value from container_of() is a pointer to the corresponding
+container type. So, for example, a pointer "kp" to a struct kobject
+embedded *within* a struct uio_map could be converted to a pointer to the
+*containing* uio_map structure with:
+
+    struct uio_map *u_map = container_of(kp, struct uio_map, kobj);
+
+For convenience, programmers often define a simple macro for "back-casting"
+kobject pointers to the containing type.  Exactly this happens in the
+earlier drivers/uio/uio.c, as you can see here:
+
+    struct uio_map {
+        struct kobject kobj;
+        struct uio_mem *mem;
+    };
 
-where pointer is the pointer to the embedded kobject, type is the type of
-the containing structure, and member is the name of the structure field to
-which pointer points.  The return value from container_of() is a pointer to
-the given type. So, for example, a pointer "kp" to a struct kobject
-embedded within a struct uio_mem could be converted to a pointer to the
-containing uio_mem structure with:
+    #define to_map(map) container_of(map, struct uio_map, kobj)
 
-    struct uio_mem *u_mem = container_of(kp, struct uio_mem, kobj);
+where the macro argument "map" is a pointer to the struct kobject in
+question.  That macro is subsequently invoked with:
 
-Programmers often define a simple macro for "back-casting" kobject pointers
-to the containing type.
+    struct uio_map *map = to_map(kobj);
 
 
 Initialization of kobjects
@@ -266,7 +285,7 @@ kobj_type:
 
     struct kobj_type {
 	    void (*release)(struct kobject *);
-	    struct sysfs_ops	*sysfs_ops;
+	    const struct sysfs_ops *sysfs_ops;
 	    struct attribute	**default_attrs;
     };
 
@@ -387,4 +406,5 @@ called, and the objects in the former circle release each other.
 Example code to copy from
 
 For a more complete example of using ksets and kobjects properly, see the
-sample/kobject/kset-example.c code.
+example programs samples/kobject/{kobject-example.c,kset-example.c},
+which will be built as loadable modules if you select CONFIG_SAMPLE_KOBJECT.
diff --git a/Documentation/laptops/00-INDEX b/Documentation/laptops/00-INDEX
index ee5692b26dd4..fa688538e757 100644
--- a/Documentation/laptops/00-INDEX
+++ b/Documentation/laptops/00-INDEX
@@ -2,6 +2,12 @@
 	- This file
 acer-wmi.txt
 	- information on the Acer Laptop WMI Extras driver.
+asus-laptop.txt
+	- information on the Asus Laptop Extras driver.
+disk-shock-protection.txt
+	- information on hard disk shock protection.
+dslm.c
+	- Simple Disk Sleep Monitor program
 laptop-mode.txt
 	- how to conserve battery power using laptop-mode.
 sony-laptop.txt
diff --git a/Documentation/laptops/Makefile b/Documentation/laptops/Makefile
new file mode 100644
index 000000000000..5cb144af3c09
--- /dev/null
+++ b/Documentation/laptops/Makefile
@@ -0,0 +1,8 @@
+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := dslm
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
diff --git a/Documentation/laptops/dslm.c b/Documentation/laptops/dslm.c
new file mode 100644
index 000000000000..72ff290c5fc6
--- /dev/null
+++ b/Documentation/laptops/dslm.c
@@ -0,0 +1,166 @@
+/*
+ * dslm.c
+ * Simple Disk Sleep Monitor
+ *  by Bartek Kania
+ * Licenced under the GPL
+ */
+#include <unistd.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <fcntl.h>
+#include <errno.h>
+#include <time.h>
+#include <string.h>
+#include <signal.h>
+#include <sys/ioctl.h>
+#include <linux/hdreg.h>
+
+#ifdef DEBUG
+#define D(x) x
+#else
+#define D(x)
+#endif
+
+int endit = 0;
+
+/* Check if the disk is in powersave-mode
+ * Most of the code is stolen from hdparm.
+ * 1 = active, 0 = standby/sleep, -1 = unknown */
+static int check_powermode(int fd)
+{
+    unsigned char args[4] = {WIN_CHECKPOWERMODE1,0,0,0};
+    int state;
+
+    if (ioctl(fd, HDIO_DRIVE_CMD, &args)
+	&& (args[0] = WIN_CHECKPOWERMODE2) /* try again with 0x98 */
+	&& ioctl(fd, HDIO_DRIVE_CMD, &args)) {
+	if (errno != EIO || args[0] != 0 || args[1] != 0) {
+	    state = -1; /* "unknown"; */
+	} else
+	    state = 0; /* "sleeping"; */
+    } else {
+	state = (args[2] == 255) ? 1 : 0;
+    }
+    D(printf(" drive state is:  %d\n", state));
+
+    return state;
+}
+
+static char *state_name(int i)
+{
+    if (i == -1) return "unknown";
+    if (i == 0) return "sleeping";
+    if (i == 1) return "active";
+
+    return "internal error";
+}
+
+static char *myctime(time_t time)
+{
+    char *ts = ctime(&time);
+    ts[strlen(ts) - 1] = 0;
+
+    return ts;
+}
+
+static void measure(int fd)
+{
+    time_t start_time;
+    int last_state;
+    time_t last_time;
+    int curr_state;
+    time_t curr_time = 0;
+    time_t time_diff;
+    time_t active_time = 0;
+    time_t sleep_time = 0;
+    time_t unknown_time = 0;
+    time_t total_time = 0;
+    int changes = 0;
+    float tmp;
+
+    printf("Starting measurements\n");
+
+    last_state = check_powermode(fd);
+    start_time = last_time = time(0);
+    printf("  System is in state %s\n\n", state_name(last_state));
+
+    while(!endit) {
+	sleep(1);
+	curr_state = check_powermode(fd);
+
+	if (curr_state != last_state || endit) {
+	    changes++;
+	    curr_time = time(0);
+	    time_diff = curr_time - last_time;
+
+	    if (last_state == 1) active_time += time_diff;
+	    else if (last_state == 0) sleep_time += time_diff;
+	    else unknown_time += time_diff;
+
+	    last_state = curr_state;
+	    last_time = curr_time;
+
+	    printf("%s: State-change to %s\n", myctime(curr_time),
+		   state_name(curr_state));
+	}
+    }
+    changes--; /* Compensate for SIGINT */
+
+    total_time = time(0) - start_time;
+    printf("\nTotal running time:  %lus\n", curr_time - start_time);
+    printf(" State changed %d times\n", changes);
+
+    tmp = (float)sleep_time / (float)total_time * 100;
+    printf(" Time in sleep state:   %lus (%.2f%%)\n", sleep_time, tmp);
+    tmp = (float)active_time / (float)total_time * 100;
+    printf(" Time in active state:  %lus (%.2f%%)\n", active_time, tmp);
+    tmp = (float)unknown_time / (float)total_time * 100;
+    printf(" Time in unknown state: %lus (%.2f%%)\n", unknown_time, tmp);
+}
+
+static void ender(int s)
+{
+    endit = 1;
+}
+
+static void usage(void)
+{
+    puts("usage: dslm [-w <time>] <disk>");
+    exit(0);
+}
+
+int main(int argc, char **argv)
+{
+    int fd;
+    char *disk = 0;
+    int settle_time = 60;
+
+    /* Parse the simple command-line */
+    if (argc == 2)
+	disk = argv[1];
+    else if (argc == 4) {
+	settle_time = atoi(argv[2]);
+	disk = argv[3];
+    } else
+	usage();
+
+    if (!(fd = open(disk, O_RDONLY|O_NONBLOCK))) {
+	printf("Can't open %s, because: %s\n", disk, strerror(errno));
+	exit(-1);
+    }
+
+    if (settle_time) {
+	printf("Waiting %d seconds for the system to settle down to "
+	       "'normal'\n", settle_time);
+	sleep(settle_time);
+    } else
+	puts("Not waiting for system to settle down");
+
+    signal(SIGINT, ender);
+
+    measure(fd);
+
+    close(fd);
+
+    return 0;
+}
diff --git a/Documentation/laptops/laptop-mode.txt b/Documentation/laptops/laptop-mode.txt
index eeedee11c8c2..2c3c35093023 100644
--- a/Documentation/laptops/laptop-mode.txt
+++ b/Documentation/laptops/laptop-mode.txt
@@ -779,172 +779,4 @@ Monitoring tool
 ---------------
 
 Bartek Kania submitted this, it can be used to measure how much time your disk
-spends spun up/down.
-
----------------------------dslm.c BEGIN-----------------------------------------
-/*
- * Simple Disk Sleep Monitor
- *  by Bartek Kania
- * Licenced under the GPL
- */
-#include <unistd.h>
-#include <stdlib.h>
-#include <stdio.h>
-#include <fcntl.h>
-#include <errno.h>
-#include <time.h>
-#include <string.h>
-#include <signal.h>
-#include <sys/ioctl.h>
-#include <linux/hdreg.h>
-
-#ifdef DEBUG
-#define D(x) x
-#else
-#define D(x)
-#endif
-
-int endit = 0;
-
-/* Check if the disk is in powersave-mode
- * Most of the code is stolen from hdparm.
- * 1 = active, 0 = standby/sleep, -1 = unknown */
-int check_powermode(int fd)
-{
-    unsigned char args[4] = {WIN_CHECKPOWERMODE1,0,0,0};
-    int state;
-
-    if (ioctl(fd, HDIO_DRIVE_CMD, &args)
-	&& (args[0] = WIN_CHECKPOWERMODE2) /* try again with 0x98 */
-	&& ioctl(fd, HDIO_DRIVE_CMD, &args)) {
-	if (errno != EIO || args[0] != 0 || args[1] != 0) {
-	    state = -1; /* "unknown"; */
-	} else
-	    state = 0; /* "sleeping"; */
-    } else {
-	state = (args[2] == 255) ? 1 : 0;
-    }
-    D(printf(" drive state is:  %d\n", state));
-
-    return state;
-}
-
-char *state_name(int i)
-{
-    if (i == -1) return "unknown";
-    if (i == 0) return "sleeping";
-    if (i == 1) return "active";
-
-    return "internal error";
-}
-
-char *myctime(time_t time)
-{
-    char *ts = ctime(&time);
-    ts[strlen(ts) - 1] = 0;
-
-    return ts;
-}
-
-void measure(int fd)
-{
-    time_t start_time;
-    int last_state;
-    time_t last_time;
-    int curr_state;
-    time_t curr_time = 0;
-    time_t time_diff;
-    time_t active_time = 0;
-    time_t sleep_time = 0;
-    time_t unknown_time = 0;
-    time_t total_time = 0;
-    int changes = 0;
-    float tmp;
-
-    printf("Starting measurements\n");
-
-    last_state = check_powermode(fd);
-    start_time = last_time = time(0);
-    printf("  System is in state %s\n\n", state_name(last_state));
-
-    while(!endit) {
-	sleep(1);
-	curr_state = check_powermode(fd);
-
-	if (curr_state != last_state || endit) {
-	    changes++;
-	    curr_time = time(0);
-	    time_diff = curr_time - last_time;
-
-	    if (last_state == 1) active_time += time_diff;
-	    else if (last_state == 0) sleep_time += time_diff;
-	    else unknown_time += time_diff;
-
-	    last_state = curr_state;
-	    last_time = curr_time;
-
-	    printf("%s: State-change to %s\n", myctime(curr_time),
-		   state_name(curr_state));
-	}
-    }
-    changes--; /* Compensate for SIGINT */
-
-    total_time = time(0) - start_time;
-    printf("\nTotal running time:  %lus\n", curr_time - start_time);
-    printf(" State changed %d times\n", changes);
-
-    tmp = (float)sleep_time / (float)total_time * 100;
-    printf(" Time in sleep state:   %lus (%.2f%%)\n", sleep_time, tmp);
-    tmp = (float)active_time / (float)total_time * 100;
-    printf(" Time in active state:  %lus (%.2f%%)\n", active_time, tmp);
-    tmp = (float)unknown_time / (float)total_time * 100;
-    printf(" Time in unknown state: %lus (%.2f%%)\n", unknown_time, tmp);
-}
-
-void ender(int s)
-{
-    endit = 1;
-}
-
-void usage()
-{
-    puts("usage: dslm [-w <time>] <disk>");
-    exit(0);
-}
-
-int main(int argc, char **argv)
-{
-    int fd;
-    char *disk = 0;
-    int settle_time = 60;
-
-    /* Parse the simple command-line */
-    if (argc == 2)
-	disk = argv[1];
-    else if (argc == 4) {
-	settle_time = atoi(argv[2]);
-	disk = argv[3];
-    } else
-	usage();
-
-    if (!(fd = open(disk, O_RDONLY|O_NONBLOCK))) {
-	printf("Can't open %s, because: %s\n", disk, strerror(errno));
-	exit(-1);
-    }
-
-    if (settle_time) {
-	printf("Waiting %d seconds for the system to settle down to "
-	       "'normal'\n", settle_time);
-	sleep(settle_time);
-    } else
-	puts("Not waiting for system to settle down");
-
-    signal(SIGINT, ender);
-
-    measure(fd);
-
-    close(fd);
-
-    return 0;
-}
----------------------------dslm.c END-------------------------------------------
+spends spun up/down.  See Documentation/laptops/dslm.c
diff --git a/Documentation/networking/Makefile b/Documentation/networking/Makefile
index 6d8af1ac56c4..5aba7a33aeeb 100644
--- a/Documentation/networking/Makefile
+++ b/Documentation/networking/Makefile
@@ -6,3 +6,5 @@ hostprogs-y := ifenslave
 
 # Tell kbuild to always build the programs
 always := $(hostprogs-y)
+
+obj-m := timestamping/
diff --git a/Documentation/networking/skfp.txt b/Documentation/networking/skfp.txt
index abfddf81e34a..203ec66c9fb4 100644
--- a/Documentation/networking/skfp.txt
+++ b/Documentation/networking/skfp.txt
@@ -68,7 +68,7 @@ Compaq adapters (not tested):
 =======================
 
 From v2.01 on, the driver is integrated in the linux kernel sources.
-Therefor, the installation is the same as for any other adapter
+Therefore, the installation is the same as for any other adapter
 supported by the kernel.
 Refer to the manual of your distribution about the installation
 of network adapters.
diff --git a/Documentation/networking/timestamping/Makefile b/Documentation/networking/timestamping/Makefile
index 2a1489fdc036..e79973443e9f 100644
--- a/Documentation/networking/timestamping/Makefile
+++ b/Documentation/networking/timestamping/Makefile
@@ -1,6 +1,13 @@
-CPPFLAGS = -I../../../include
+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
 
-timestamping: timestamping.c
+# List of programs to build
+hostprogs-y := timestamping
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
+
+HOSTCFLAGS_timestamping.o += -I$(objtree)/usr/include
 
 clean:
 	rm -f timestamping
diff --git a/Documentation/networking/timestamping/timestamping.c b/Documentation/networking/timestamping/timestamping.c
index a7936fe8444a..8ba82bfe6a33 100644
--- a/Documentation/networking/timestamping/timestamping.c
+++ b/Documentation/networking/timestamping/timestamping.c
@@ -41,9 +41,9 @@
 #include <arpa/inet.h>
 #include <net/if.h>
 
-#include "asm/types.h"
-#include "linux/net_tstamp.h"
-#include "linux/errqueue.h"
+#include <asm/types.h>
+#include <linux/net_tstamp.h>
+#include <linux/errqueue.h>
 
 #ifndef SO_TIMESTAMPING
 # define SO_TIMESTAMPING         37
@@ -164,7 +164,7 @@ static void printpacket(struct msghdr *msg, int res,
 
 	gettimeofday(&now, 0);
 
-	printf("%ld.%06ld: received %s data, %d bytes from %s, %d bytes control messages\n",
+	printf("%ld.%06ld: received %s data, %d bytes from %s, %zu bytes control messages\n",
 	       (long)now.tv_sec, (long)now.tv_usec,
 	       (recvmsg_flags & MSG_ERRQUEUE) ? "error" : "regular",
 	       res,
@@ -173,7 +173,7 @@ static void printpacket(struct msghdr *msg, int res,
 	for (cmsg = CMSG_FIRSTHDR(msg);
 	     cmsg;
 	     cmsg = CMSG_NXTHDR(msg, cmsg)) {
-		printf("   cmsg len %d: ", cmsg->cmsg_len);
+		printf("   cmsg len %zu: ", cmsg->cmsg_len);
 		switch (cmsg->cmsg_level) {
 		case SOL_SOCKET:
 			printf("SOL_SOCKET ");
@@ -370,7 +370,7 @@ int main(int argc, char **argv)
 	}
 
 	sock = socket(PF_INET, SOCK_DGRAM, IPPROTO_UDP);
-	if (socket < 0)
+	if (sock < 0)
 		bail("socket");
 
 	memset(&device, 0, sizeof(device));
diff --git a/Documentation/pnp.txt b/Documentation/pnp.txt
index a327db67782a..763e4659bf18 100644
--- a/Documentation/pnp.txt
+++ b/Documentation/pnp.txt
@@ -57,7 +57,7 @@ PC standard floppy disk controller
 # cat resources
 DISABLED
 
-- Notice the string "DISABLED".  THis means the device is not active.
+- Notice the string "DISABLED".  This means the device is not active.
 
 3.) check the device's possible configurations (optional)
 # cat options
@@ -139,7 +139,7 @@ Plug and Play but it is planned to be in the near future.
 
 Requirements for a Linux PnP protocol:
 1.) the protocol must use EISA IDs
-2.) the protocol must inform the PnP Layer of a devices current configuration
+2.) the protocol must inform the PnP Layer of a device's current configuration
 - the ability to set resources is optional but preferred.
 
 The following are PnP protocol related functions:
@@ -158,7 +158,7 @@ pnp_remove_device
 - automatically will free mem used by the device and related structures
 
 pnp_add_id
-- adds a EISA ID to the list of supported IDs for the specified device
+- adds an EISA ID to the list of supported IDs for the specified device
 
 For more information consult the source of a protocol such as
 /drivers/pnp/pnpbios/core.c.
@@ -167,7 +167,7 @@ For more information consult the source of a protocol such as
 
 Linux Plug and Play Drivers
 ---------------------------
-	This section contains information for linux PnP driver developers.
+	This section contains information for Linux PnP driver developers.
 
 The New Way
 ...........
@@ -235,11 +235,10 @@ static int __init serial8250_pnp_init(void)
 The Old Way
 ...........
 
-a series of compatibility functions have been created to make it easy to convert 
-
+A series of compatibility functions have been created to make it easy to convert
 ISAPNP drivers.  They should serve as a temporary solution only.
 
-they are as follows:
+They are as follows:
 
 struct pnp_card *pnp_find_card(unsigned short vendor,
 				 unsigned short device,
diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt
index ab00eeddecaf..55b859b3bc72 100644
--- a/Documentation/power/runtime_pm.txt
+++ b/Documentation/power/runtime_pm.txt
@@ -256,7 +256,7 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
       to suspend the device again in future
 
   int pm_runtime_resume(struct device *dev);
-    - execute the subsystem-leve resume callback for the device; returns 0 on
+    - execute the subsystem-level resume callback for the device; returns 0 on
       success, 1 if the device's run-time PM status was already 'active' or
       error code on failure, where -EAGAIN means it may be safe to attempt to
       resume the device again in future, but 'power.runtime_error' should be
diff --git a/Documentation/s390/kvm.txt b/Documentation/s390/kvm.txt
index 6f5ceb0f09fc..85f3280d7ef6 100644
--- a/Documentation/s390/kvm.txt
+++ b/Documentation/s390/kvm.txt
@@ -102,7 +102,7 @@ args:		unsigned long
 see also:	include/linux/kvm.h
 This ioctl stores the state of the cpu at the guest real address given as
 argument, unless one of the following values defined in include/linux/kvm.h
-is given as arguement:
+is given as argument:
 KVM_S390_STORE_STATUS_NOADDR - the CPU stores its status to the save area in
 absolute lowcore as defined by the principles of operation
 KVM_S390_STORE_STATUS_PREFIXED - the CPU stores its status to the save area in
diff --git a/Documentation/scsi/ChangeLog.lpfc b/Documentation/scsi/ChangeLog.lpfc
index ff19a52fe004..2ffc1148eb95 100644
--- a/Documentation/scsi/ChangeLog.lpfc
+++ b/Documentation/scsi/ChangeLog.lpfc
@@ -989,8 +989,8 @@ Changes from 20040709 to 20040716
 	* Remove redundant port_cmp != 2 check in if
 	  (!port_cmp) { .... if (port_cmp != 2).... }
 	* Clock changes: removed struct clk_data and timerList.
-	* Clock changes: seperate nodev_tmo and els_retry_delay into 2
-	  seperate timers and convert to 1 argument changed
+	* Clock changes: separate nodev_tmo and els_retry_delay into 2
+	  separate timers and convert to 1 argument changed
 	  LPFC_NODE_FARP_PEND_t to struct lpfc_node_farp_pend convert
 	  ipfarp_tmo to 1 argument convert target struct tmofunc and
 	  rtplunfunc to 1 argument * cr_count, cr_delay and
@@ -1514,7 +1514,7 @@ Changes from 20040402 to 20040409
 	* Remove unused elxclock declaration in elx_sli.h.
 	* Since everywhere IOCB_ENTRY is used, the return value is cast,
 	  move the cast into the macro.
-	* Split ioctls out into seperate files
+	* Split ioctls out into separate files
 
 Changes from 20040326 to 20040402
 
@@ -1534,7 +1534,7 @@ Changes from 20040326 to 20040402
 	* Unused variable cleanup
 	* Use Linux list macros for DMABUF_t
 	* Break up ioctls into 3 sections, dfc, util, hbaapi
-	  rearranged code so this could be easily seperated into a
+	  rearranged code so this could be easily separated into a
 	  differnet module later All 3 are currently turned on by
 	  defines in lpfc_ioctl.c LPFC_DFC_IOCTL, LPFC_UTIL_IOCTL,
 	  LPFC_HBAAPI_IOCTL
@@ -1551,7 +1551,7 @@ Changes from 20040326 to 20040402
 	  started by lpfc_online().  lpfc_offline() only stopped
 	  els_timeout routine.  It now stops all timeout routines
 	  associated with that hba.
-	* Replace seperate next and prev pointers in struct
+	* Replace separate next and prev pointers in struct
 	  lpfc_bindlist with list_head type.  In elxHBA_t, replace
 	  fc_nlpbind_start and _end with fc_nlpbind_list and use
 	  list_head macros to access it.
diff --git a/Documentation/serial/tty.txt b/Documentation/serial/tty.txt
index 5e5349a4fcd2..7c900507279f 100644
--- a/Documentation/serial/tty.txt
+++ b/Documentation/serial/tty.txt
@@ -105,6 +105,10 @@ write_wakeup()	-	May be called at any point between open and close.
 			is permitted to call the driver write method from
 			this function. In such a situation defer it.
 
+dcd_change()	-	Report to the tty line the current DCD pin status
+			changes and the relative timestamp. The timestamp
+			can be NULL.
+
 
 Driver Access
 
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 33df82e3a398..bfcbbf88c44d 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -1812,7 +1812,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
   Module snd-ua101
   ----------------
 
-    Module for the Edirol UA-101 audio/MIDI interface.
+    Module for the Edirol UA-101/UA-1000 audio/MIDI interfaces.
 
     This module supports multiple devices, autoprobe and hotplugging.
 
diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt
index fc5790d36cd9..6c7d18c53f84 100644
--- a/Documentation/sysctl/vm.txt
+++ b/Documentation/sysctl/vm.txt
@@ -573,11 +573,14 @@ Because other nodes' memory may be free. This means system total status
 may be not fatal yet.
 
 If this is set to 2, the kernel panics compulsorily even on the
-above-mentioned.
+above-mentioned. Even oom happens under memory cgroup, the whole
+system panics.
 
 The default value is 0.
 1 and 2 are for failover of clustering. Please select either
 according to your policy of failover.
+panic_on_oom=2+kdump gives you very strong tool to investigate
+why oom happens. You can get snapshot.
 
 =============================================================
 
diff --git a/Documentation/timers/00-INDEX b/Documentation/timers/00-INDEX
index 397dc35e1323..a9248da5cdbc 100644
--- a/Documentation/timers/00-INDEX
+++ b/Documentation/timers/00-INDEX
@@ -4,6 +4,8 @@ highres.txt
 	- High resolution timers and dynamic ticks design notes
 hpet.txt
 	- High Precision Event Timer Driver for Linux
+hpet_example.c
+	- sample hpet timer test program
 hrtimers.txt
 	- subsystem for high-resolution kernel timers
 timer_stats.txt
diff --git a/Documentation/timers/Makefile b/Documentation/timers/Makefile
new file mode 100644
index 000000000000..c85625f4ab25
--- /dev/null
+++ b/Documentation/timers/Makefile
@@ -0,0 +1,8 @@
+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := hpet_example
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
diff --git a/Documentation/timers/hpet.txt b/Documentation/timers/hpet.txt
index 16d25e6b5a00..767392ffd31e 100644
--- a/Documentation/timers/hpet.txt
+++ b/Documentation/timers/hpet.txt
@@ -26,274 +26,5 @@ initialization.  An example of this initialization can be found in
 arch/x86/kernel/hpet.c.
 
 The driver provides a userspace API which resembles the API found in the
-RTC driver framework.  An example user space program is provided below.
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <string.h>
-#include <memory.h>
-#include <malloc.h>
-#include <time.h>
-#include <ctype.h>
-#include <sys/types.h>
-#include <sys/wait.h>
-#include <signal.h>
-#include <fcntl.h>
-#include <errno.h>
-#include <sys/time.h>
-#include <linux/hpet.h>
-
-
-extern void hpet_open_close(int, const char **);
-extern void hpet_info(int, const char **);
-extern void hpet_poll(int, const char **);
-extern void hpet_fasync(int, const char **);
-extern void hpet_read(int, const char **);
-
-#include <sys/poll.h>
-#include <sys/ioctl.h>
-#include <signal.h>
-
-struct hpet_command {
-	char		*command;
-	void		(*func)(int argc, const char ** argv);
-} hpet_command[] = {
-	{
-		"open-close",
-		hpet_open_close
-	},
-	{
-		"info",
-		hpet_info
-	},
-	{
-		"poll",
-		hpet_poll
-	},
-	{
-		"fasync",
-		hpet_fasync
-	},
-};
-
-int
-main(int argc, const char ** argv)
-{
-	int	i;
-
-	argc--;
-	argv++;
-
-	if (!argc) {
-		fprintf(stderr, "-hpet: requires command\n");
-		return -1;
-	}
-
-
-	for (i = 0; i < (sizeof (hpet_command) / sizeof (hpet_command[0])); i++)
-		if (!strcmp(argv[0], hpet_command[i].command)) {
-			argc--;
-			argv++;
-			fprintf(stderr, "-hpet: executing %s\n",
-				hpet_command[i].command);
-			hpet_command[i].func(argc, argv);
-			return 0;
-		}
-
-	fprintf(stderr, "do_hpet: command %s not implemented\n", argv[0]);
-
-	return -1;
-}
-
-void
-hpet_open_close(int argc, const char **argv)
-{
-	int	fd;
-
-	if (argc != 1) {
-		fprintf(stderr, "hpet_open_close: device-name\n");
-		return;
-	}
-
-	fd = open(argv[0], O_RDONLY);
-	if (fd < 0)
-		fprintf(stderr, "hpet_open_close: open failed\n");
-	else
-		close(fd);
-
-	return;
-}
-
-void
-hpet_info(int argc, const char **argv)
-{
-}
-
-void
-hpet_poll(int argc, const char **argv)
-{
-	unsigned long		freq;
-	int			iterations, i, fd;
-	struct pollfd		pfd;
-	struct hpet_info	info;
-	struct timeval		stv, etv;
-	struct timezone		tz;
-	long			usec;
-
-	if (argc != 3) {
-		fprintf(stderr, "hpet_poll: device-name freq iterations\n");
-		return;
-	}
-
-	freq = atoi(argv[1]);
-	iterations = atoi(argv[2]);
-
-	fd = open(argv[0], O_RDONLY);
-
-	if (fd < 0) {
-		fprintf(stderr, "hpet_poll: open of %s failed\n", argv[0]);
-		return;
-	}
-
-	if (ioctl(fd, HPET_IRQFREQ, freq) < 0) {
-		fprintf(stderr, "hpet_poll: HPET_IRQFREQ failed\n");
-		goto out;
-	}
-
-	if (ioctl(fd, HPET_INFO, &info) < 0) {
-		fprintf(stderr, "hpet_poll: failed to get info\n");
-		goto out;
-	}
-
-	fprintf(stderr, "hpet_poll: info.hi_flags 0x%lx\n", info.hi_flags);
-
-	if (info.hi_flags && (ioctl(fd, HPET_EPI, 0) < 0)) {
-		fprintf(stderr, "hpet_poll: HPET_EPI failed\n");
-		goto out;
-	}
-
-	if (ioctl(fd, HPET_IE_ON, 0) < 0) {
-		fprintf(stderr, "hpet_poll, HPET_IE_ON failed\n");
-		goto out;
-	}
-
-	pfd.fd = fd;
-	pfd.events = POLLIN;
-
-	for (i = 0; i < iterations; i++) {
-		pfd.revents = 0;
-		gettimeofday(&stv, &tz);
-		if (poll(&pfd, 1, -1) < 0)
-			fprintf(stderr, "hpet_poll: poll failed\n");
-		else {
-			long 	data;
-
-			gettimeofday(&etv, &tz);
-			usec = stv.tv_sec * 1000000 + stv.tv_usec;
-			usec = (etv.tv_sec * 1000000 + etv.tv_usec) - usec;
-
-			fprintf(stderr,
-				"hpet_poll: expired time = 0x%lx\n", usec);
-
-			fprintf(stderr, "hpet_poll: revents = 0x%x\n",
-				pfd.revents);
-
-			if (read(fd, &data, sizeof(data)) != sizeof(data)) {
-				fprintf(stderr, "hpet_poll: read failed\n");
-			}
-			else
-				fprintf(stderr, "hpet_poll: data 0x%lx\n",
-					data);
-		}
-	}
-
-out:
-	close(fd);
-	return;
-}
-
-static int hpet_sigio_count;
-
-static void
-hpet_sigio(int val)
-{
-	fprintf(stderr, "hpet_sigio: called\n");
-	hpet_sigio_count++;
-}
-
-void
-hpet_fasync(int argc, const char **argv)
-{
-	unsigned long		freq;
-	int			iterations, i, fd, value;
-	sig_t			oldsig;
-	struct hpet_info	info;
-
-	hpet_sigio_count = 0;
-	fd = -1;
-
-	if ((oldsig = signal(SIGIO, hpet_sigio)) == SIG_ERR) {
-		fprintf(stderr, "hpet_fasync: failed to set signal handler\n");
-		return;
-	}
-
-	if (argc != 3) {
-		fprintf(stderr, "hpet_fasync: device-name freq iterations\n");
-		goto out;
-	}
-
-	fd = open(argv[0], O_RDONLY);
-
-	if (fd < 0) {
-		fprintf(stderr, "hpet_fasync: failed to open %s\n", argv[0]);
-		return;
-	}
-
-
-	if ((fcntl(fd, F_SETOWN, getpid()) == 1) ||
-		((value = fcntl(fd, F_GETFL)) == 1) ||
-		(fcntl(fd, F_SETFL, value | O_ASYNC) == 1)) {
-		fprintf(stderr, "hpet_fasync: fcntl failed\n");
-		goto out;
-	}
-
-	freq = atoi(argv[1]);
-	iterations = atoi(argv[2]);
-
-	if (ioctl(fd, HPET_IRQFREQ, freq) < 0) {
-		fprintf(stderr, "hpet_fasync: HPET_IRQFREQ failed\n");
-		goto out;
-	}
-
-	if (ioctl(fd, HPET_INFO, &info) < 0) {
-		fprintf(stderr, "hpet_fasync: failed to get info\n");
-		goto out;
-	}
-
-	fprintf(stderr, "hpet_fasync: info.hi_flags 0x%lx\n", info.hi_flags);
-
-	if (info.hi_flags && (ioctl(fd, HPET_EPI, 0) < 0)) {
-		fprintf(stderr, "hpet_fasync: HPET_EPI failed\n");
-		goto out;
-	}
-
-	if (ioctl(fd, HPET_IE_ON, 0) < 0) {
-		fprintf(stderr, "hpet_fasync, HPET_IE_ON failed\n");
-		goto out;
-	}
-
-	for (i = 0; i < iterations; i++) {
-		(void) pause();
-		fprintf(stderr, "hpet_fasync: count = %d\n", hpet_sigio_count);
-	}
-
-out:
-	signal(SIGIO, oldsig);
-
-	if (fd >= 0)
-		close(fd);
-
-	return;
-}
+RTC driver framework.  An example user space program is provided in
+file:Documentation/timers/hpet_example.c
diff --git a/Documentation/timers/hpet_example.c b/Documentation/timers/hpet_example.c
new file mode 100644
index 000000000000..f9ce2d9fdfd5
--- /dev/null
+++ b/Documentation/timers/hpet_example.c
@@ -0,0 +1,269 @@
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <string.h>
+#include <memory.h>
+#include <malloc.h>
+#include <time.h>
+#include <ctype.h>
+#include <sys/types.h>
+#include <sys/wait.h>
+#include <signal.h>
+#include <fcntl.h>
+#include <errno.h>
+#include <sys/time.h>
+#include <linux/hpet.h>
+
+
+extern void hpet_open_close(int, const char **);
+extern void hpet_info(int, const char **);
+extern void hpet_poll(int, const char **);
+extern void hpet_fasync(int, const char **);
+extern void hpet_read(int, const char **);
+
+#include <sys/poll.h>
+#include <sys/ioctl.h>
+#include <signal.h>
+
+struct hpet_command {
+	char		*command;
+	void		(*func)(int argc, const char ** argv);
+} hpet_command[] = {
+	{
+		"open-close",
+		hpet_open_close
+	},
+	{
+		"info",
+		hpet_info
+	},
+	{
+		"poll",
+		hpet_poll
+	},
+	{
+		"fasync",
+		hpet_fasync
+	},
+};
+
+int
+main(int argc, const char ** argv)
+{
+	int	i;
+
+	argc--;
+	argv++;
+
+	if (!argc) {
+		fprintf(stderr, "-hpet: requires command\n");
+		return -1;
+	}
+
+
+	for (i = 0; i < (sizeof (hpet_command) / sizeof (hpet_command[0])); i++)
+		if (!strcmp(argv[0], hpet_command[i].command)) {
+			argc--;
+			argv++;
+			fprintf(stderr, "-hpet: executing %s\n",
+				hpet_command[i].command);
+			hpet_command[i].func(argc, argv);
+			return 0;
+		}
+
+	fprintf(stderr, "do_hpet: command %s not implemented\n", argv[0]);
+
+	return -1;
+}
+
+void
+hpet_open_close(int argc, const char **argv)
+{
+	int	fd;
+
+	if (argc != 1) {
+		fprintf(stderr, "hpet_open_close: device-name\n");
+		return;
+	}
+
+	fd = open(argv[0], O_RDONLY);
+	if (fd < 0)
+		fprintf(stderr, "hpet_open_close: open failed\n");
+	else
+		close(fd);
+
+	return;
+}
+
+void
+hpet_info(int argc, const char **argv)
+{
+}
+
+void
+hpet_poll(int argc, const char **argv)
+{
+	unsigned long		freq;
+	int			iterations, i, fd;
+	struct pollfd		pfd;
+	struct hpet_info	info;
+	struct timeval		stv, etv;
+	struct timezone		tz;
+	long			usec;
+
+	if (argc != 3) {
+		fprintf(stderr, "hpet_poll: device-name freq iterations\n");
+		return;
+	}
+
+	freq = atoi(argv[1]);
+	iterations = atoi(argv[2]);
+
+	fd = open(argv[0], O_RDONLY);
+
+	if (fd < 0) {
+		fprintf(stderr, "hpet_poll: open of %s failed\n", argv[0]);
+		return;
+	}
+
+	if (ioctl(fd, HPET_IRQFREQ, freq) < 0) {
+		fprintf(stderr, "hpet_poll: HPET_IRQFREQ failed\n");
+		goto out;
+	}
+
+	if (ioctl(fd, HPET_INFO, &info) < 0) {
+		fprintf(stderr, "hpet_poll: failed to get info\n");
+		goto out;
+	}
+
+	fprintf(stderr, "hpet_poll: info.hi_flags 0x%lx\n", info.hi_flags);
+
+	if (info.hi_flags && (ioctl(fd, HPET_EPI, 0) < 0)) {
+		fprintf(stderr, "hpet_poll: HPET_EPI failed\n");
+		goto out;
+	}
+
+	if (ioctl(fd, HPET_IE_ON, 0) < 0) {
+		fprintf(stderr, "hpet_poll, HPET_IE_ON failed\n");
+		goto out;
+	}
+
+	pfd.fd = fd;
+	pfd.events = POLLIN;
+
+	for (i = 0; i < iterations; i++) {
+		pfd.revents = 0;
+		gettimeofday(&stv, &tz);
+		if (poll(&pfd, 1, -1) < 0)
+			fprintf(stderr, "hpet_poll: poll failed\n");
+		else {
+			long 	data;
+
+			gettimeofday(&etv, &tz);
+			usec = stv.tv_sec * 1000000 + stv.tv_usec;
+			usec = (etv.tv_sec * 1000000 + etv.tv_usec) - usec;
+
+			fprintf(stderr,
+				"hpet_poll: expired time = 0x%lx\n", usec);
+
+			fprintf(stderr, "hpet_poll: revents = 0x%x\n",
+				pfd.revents);
+
+			if (read(fd, &data, sizeof(data)) != sizeof(data)) {
+				fprintf(stderr, "hpet_poll: read failed\n");
+			}
+			else
+				fprintf(stderr, "hpet_poll: data 0x%lx\n",
+					data);
+		}
+	}
+
+out:
+	close(fd);
+	return;
+}
+
+static int hpet_sigio_count;
+
+static void
+hpet_sigio(int val)
+{
+	fprintf(stderr, "hpet_sigio: called\n");
+	hpet_sigio_count++;
+}
+
+void
+hpet_fasync(int argc, const char **argv)
+{
+	unsigned long		freq;
+	int			iterations, i, fd, value;
+	sig_t			oldsig;
+	struct hpet_info	info;
+
+	hpet_sigio_count = 0;
+	fd = -1;
+
+	if ((oldsig = signal(SIGIO, hpet_sigio)) == SIG_ERR) {
+		fprintf(stderr, "hpet_fasync: failed to set signal handler\n");
+		return;
+	}
+
+	if (argc != 3) {
+		fprintf(stderr, "hpet_fasync: device-name freq iterations\n");
+		goto out;
+	}
+
+	fd = open(argv[0], O_RDONLY);
+
+	if (fd < 0) {
+		fprintf(stderr, "hpet_fasync: failed to open %s\n", argv[0]);
+		return;
+	}
+
+
+	if ((fcntl(fd, F_SETOWN, getpid()) == 1) ||
+		((value = fcntl(fd, F_GETFL)) == 1) ||
+		(fcntl(fd, F_SETFL, value | O_ASYNC) == 1)) {
+		fprintf(stderr, "hpet_fasync: fcntl failed\n");
+		goto out;
+	}
+
+	freq = atoi(argv[1]);
+	iterations = atoi(argv[2]);
+
+	if (ioctl(fd, HPET_IRQFREQ, freq) < 0) {
+		fprintf(stderr, "hpet_fasync: HPET_IRQFREQ failed\n");
+		goto out;
+	}
+
+	if (ioctl(fd, HPET_INFO, &info) < 0) {
+		fprintf(stderr, "hpet_fasync: failed to get info\n");
+		goto out;
+	}
+
+	fprintf(stderr, "hpet_fasync: info.hi_flags 0x%lx\n", info.hi_flags);
+
+	if (info.hi_flags && (ioctl(fd, HPET_EPI, 0) < 0)) {
+		fprintf(stderr, "hpet_fasync: HPET_EPI failed\n");
+		goto out;
+	}
+
+	if (ioctl(fd, HPET_IE_ON, 0) < 0) {
+		fprintf(stderr, "hpet_fasync, HPET_IE_ON failed\n");
+		goto out;
+	}
+
+	for (i = 0; i < iterations; i++) {
+		(void) pause();
+		fprintf(stderr, "hpet_fasync: count = %d\n", hpet_sigio_count);
+	}
+
+out:
+	signal(SIGIO, oldsig);
+
+	if (fd >= 0)
+		close(fd);
+
+	return;
+}
diff --git a/Documentation/trace/ftrace.txt b/Documentation/trace/ftrace.txt
index bab3040da548..03485bfbd797 100644
--- a/Documentation/trace/ftrace.txt
+++ b/Documentation/trace/ftrace.txt
@@ -1588,7 +1588,7 @@ module author does not need to worry about it.
 
 When tracing is enabled, kstop_machine is called to prevent
 races with the CPUS executing code being modified (which can
-cause the CPU to do undesireable things), and the nops are
+cause the CPU to do undesirable things), and the nops are
 patched back to calls. But this time, they do not call mcount
 (which is just a function stub). They now call into the ftrace
 infrastructure.
diff --git a/Documentation/vm/00-INDEX b/Documentation/vm/00-INDEX
index e57d6a9dd32b..dca82d7c83d8 100644
--- a/Documentation/vm/00-INDEX
+++ b/Documentation/vm/00-INDEX
@@ -4,23 +4,35 @@ active_mm.txt
 	- An explanation from Linus about tsk->active_mm vs tsk->mm.
 balance
 	- various information on memory balancing.
+hugepage-mmap.c
+	- Example app using huge page memory with the mmap system call.
+hugepage-shm.c
+	- Example app using huge page memory with Sys V shared memory system calls.
 hugetlbpage.txt
 	- a brief summary of hugetlbpage support in the Linux kernel.
+hwpoison.txt
+	- explains what hwpoison is
 ksm.txt
 	- how to use the Kernel Samepage Merging feature.
 locking
 	- info on how locking and synchronization is done in the Linux vm code.
+map_hugetlb.c
+	- an example program that uses the MAP_HUGETLB mmap flag.
 numa
 	- information about NUMA specific code in the Linux vm.
 numa_memory_policy.txt
 	- documentation of concepts and APIs of the 2.6 memory policy support.
 overcommit-accounting
 	- description of the Linux kernels overcommit handling modes.
+page-types.c
+	- Tool for querying page flags
 page_migration
 	- description of page migration in NUMA systems.
+pagemap.txt
+	- pagemap, from the userspace perspective
 slabinfo.c
 	- source code for a tool to get reports about slabs.
 slub.txt
 	- a short users guide for SLUB.
-map_hugetlb.c
-	- an example program that uses the MAP_HUGETLB mmap flag.
+unevictable-lru.txt
+	- Unevictable LRU infrastructure
diff --git a/Documentation/vm/Makefile b/Documentation/vm/Makefile
index 5bd269b3731a..9dcff328b964 100644
--- a/Documentation/vm/Makefile
+++ b/Documentation/vm/Makefile
@@ -2,7 +2,7 @@
 obj- := dummy.o
 
 # List of programs to build
-hostprogs-y := slabinfo page-types
+hostprogs-y := slabinfo page-types hugepage-mmap hugepage-shm map_hugetlb
 
 # Tell kbuild to always build the programs
 always := $(hostprogs-y)
diff --git a/Documentation/vm/hugepage-mmap.c b/Documentation/vm/hugepage-mmap.c
new file mode 100644
index 000000000000..db0dd9a33d54
--- /dev/null
+++ b/Documentation/vm/hugepage-mmap.c
@@ -0,0 +1,91 @@
+/*
+ * hugepage-mmap:
+ *
+ * Example of using huge page memory in a user application using the mmap
+ * system call.  Before running this application, make sure that the
+ * administrator has mounted the hugetlbfs filesystem (on some directory
+ * like /mnt) using the command mount -t hugetlbfs nodev /mnt. In this
+ * example, the app is requesting memory of size 256MB that is backed by
+ * huge pages.
+ *
+ * For the ia64 architecture, the Linux kernel reserves Region number 4 for
+ * huge pages.  That means that if one requires a fixed address, a huge page
+ * aligned address starting with 0x800000... will be required.  If a fixed
+ * address is not required, the kernel will select an address in the proper
+ * range.
+ * Other architectures, such as ppc64, i386 or x86_64 are not so constrained.
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <unistd.h>
+#include <sys/mman.h>
+#include <fcntl.h>
+
+#define FILE_NAME "/mnt/hugepagefile"
+#define LENGTH (256UL*1024*1024)
+#define PROTECTION (PROT_READ | PROT_WRITE)
+
+/* Only ia64 requires this */
+#ifdef __ia64__
+#define ADDR (void *)(0x8000000000000000UL)
+#define FLAGS (MAP_SHARED | MAP_FIXED)
+#else
+#define ADDR (void *)(0x0UL)
+#define FLAGS (MAP_SHARED)
+#endif
+
+static void check_bytes(char *addr)
+{
+	printf("First hex is %x\n", *((unsigned int *)addr));
+}
+
+static void write_bytes(char *addr)
+{
+	unsigned long i;
+
+	for (i = 0; i < LENGTH; i++)
+		*(addr + i) = (char)i;
+}
+
+static void read_bytes(char *addr)
+{
+	unsigned long i;
+
+	check_bytes(addr);
+	for (i = 0; i < LENGTH; i++)
+		if (*(addr + i) != (char)i) {
+			printf("Mismatch at %lu\n", i);
+			break;
+		}
+}
+
+int main(void)
+{
+	void *addr;
+	int fd;
+
+	fd = open(FILE_NAME, O_CREAT | O_RDWR, 0755);
+	if (fd < 0) {
+		perror("Open failed");
+		exit(1);
+	}
+
+	addr = mmap(ADDR, LENGTH, PROTECTION, FLAGS, fd, 0);
+	if (addr == MAP_FAILED) {
+		perror("mmap");
+		unlink(FILE_NAME);
+		exit(1);
+	}
+
+	printf("Returned address is %p\n", addr);
+	check_bytes(addr);
+	write_bytes(addr);
+	read_bytes(addr);
+
+	munmap(addr, LENGTH);
+	close(fd);
+	unlink(FILE_NAME);
+
+	return 0;
+}
diff --git a/Documentation/vm/hugepage-shm.c b/Documentation/vm/hugepage-shm.c
new file mode 100644
index 000000000000..07956d8592c9
--- /dev/null
+++ b/Documentation/vm/hugepage-shm.c
@@ -0,0 +1,98 @@
+/*
+ * hugepage-shm:
+ *
+ * Example of using huge page memory in a user application using Sys V shared
+ * memory system calls.  In this example the app is requesting 256MB of
+ * memory that is backed by huge pages.  The application uses the flag
+ * SHM_HUGETLB in the shmget system call to inform the kernel that it is
+ * requesting huge pages.
+ *
+ * For the ia64 architecture, the Linux kernel reserves Region number 4 for
+ * huge pages.  That means that if one requires a fixed address, a huge page
+ * aligned address starting with 0x800000... will be required.  If a fixed
+ * address is not required, the kernel will select an address in the proper
+ * range.
+ * Other architectures, such as ppc64, i386 or x86_64 are not so constrained.
+ *
+ * Note: The default shared memory limit is quite low on many kernels,
+ * you may need to increase it via:
+ *
+ * echo 268435456 > /proc/sys/kernel/shmmax
+ *
+ * This will increase the maximum size per shared memory segment to 256MB.
+ * The other limit that you will hit eventually is shmall which is the
+ * total amount of shared memory in pages. To set it to 16GB on a system
+ * with a 4kB pagesize do:
+ *
+ * echo 4194304 > /proc/sys/kernel/shmall
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/ipc.h>
+#include <sys/shm.h>
+#include <sys/mman.h>
+
+#ifndef SHM_HUGETLB
+#define SHM_HUGETLB 04000
+#endif
+
+#define LENGTH (256UL*1024*1024)
+
+#define dprintf(x)  printf(x)
+
+/* Only ia64 requires this */
+#ifdef __ia64__
+#define ADDR (void *)(0x8000000000000000UL)
+#define SHMAT_FLAGS (SHM_RND)
+#else
+#define ADDR (void *)(0x0UL)
+#define SHMAT_FLAGS (0)
+#endif
+
+int main(void)
+{
+	int shmid;
+	unsigned long i;
+	char *shmaddr;
+
+	if ((shmid = shmget(2, LENGTH,
+			    SHM_HUGETLB | IPC_CREAT | SHM_R | SHM_W)) < 0) {
+		perror("shmget");
+		exit(1);
+	}
+	printf("shmid: 0x%x\n", shmid);
+
+	shmaddr = shmat(shmid, ADDR, SHMAT_FLAGS);
+	if (shmaddr == (char *)-1) {
+		perror("Shared memory attach failure");
+		shmctl(shmid, IPC_RMID, NULL);
+		exit(2);
+	}
+	printf("shmaddr: %p\n", shmaddr);
+
+	dprintf("Starting the writes:\n");
+	for (i = 0; i < LENGTH; i++) {
+		shmaddr[i] = (char)(i);
+		if (!(i % (1024 * 1024)))
+			dprintf(".");
+	}
+	dprintf("\n");
+
+	dprintf("Starting the Check...");
+	for (i = 0; i < LENGTH; i++)
+		if (shmaddr[i] != (char)i)
+			printf("\nIndex %lu mismatched\n", i);
+	dprintf("Done.\n");
+
+	if (shmdt((const void *)shmaddr) != 0) {
+		perror("Detach failure");
+		shmctl(shmid, IPC_RMID, NULL);
+		exit(3);
+	}
+
+	shmctl(shmid, IPC_RMID, NULL);
+
+	return 0;
+}
diff --git a/Documentation/vm/hugetlbpage.txt b/Documentation/vm/hugetlbpage.txt
index bc31636973e3..457634c1e03e 100644
--- a/Documentation/vm/hugetlbpage.txt
+++ b/Documentation/vm/hugetlbpage.txt
@@ -299,176 +299,11 @@ map_hugetlb.c.
 *******************************************************************
 
 /*
- * Example of using huge page memory in a user application using Sys V shared
- * memory system calls.  In this example the app is requesting 256MB of
- * memory that is backed by huge pages.  The application uses the flag
- * SHM_HUGETLB in the shmget system call to inform the kernel that it is
- * requesting huge pages.
- *
- * For the ia64 architecture, the Linux kernel reserves Region number 4 for
- * huge pages.  That means that if one requires a fixed address, a huge page
- * aligned address starting with 0x800000... will be required.  If a fixed
- * address is not required, the kernel will select an address in the proper
- * range.
- * Other architectures, such as ppc64, i386 or x86_64 are not so constrained.
- *
- * Note: The default shared memory limit is quite low on many kernels,
- * you may need to increase it via:
- *
- * echo 268435456 > /proc/sys/kernel/shmmax
- *
- * This will increase the maximum size per shared memory segment to 256MB.
- * The other limit that you will hit eventually is shmall which is the
- * total amount of shared memory in pages. To set it to 16GB on a system
- * with a 4kB pagesize do:
- *
- * echo 4194304 > /proc/sys/kernel/shmall
+ * hugepage-shm:  see Documentation/vm/hugepage-shm.c
  */
-#include <stdlib.h>
-#include <stdio.h>
-#include <sys/types.h>
-#include <sys/ipc.h>
-#include <sys/shm.h>
-#include <sys/mman.h>
-
-#ifndef SHM_HUGETLB
-#define SHM_HUGETLB 04000
-#endif
-
-#define LENGTH (256UL*1024*1024)
-
-#define dprintf(x)  printf(x)
-
-#define ADDR (void *)(0x0UL)	/* let kernel choose address */
-#define SHMAT_FLAGS (0)
-
-int main(void)
-{
-	int shmid;
-	unsigned long i;
-	char *shmaddr;
-
-	if ((shmid = shmget(2, LENGTH,
-			    SHM_HUGETLB | IPC_CREAT | SHM_R | SHM_W)) < 0) {
-		perror("shmget");
-		exit(1);
-	}
-	printf("shmid: 0x%x\n", shmid);
-
-	shmaddr = shmat(shmid, ADDR, SHMAT_FLAGS);
-	if (shmaddr == (char *)-1) {
-		perror("Shared memory attach failure");
-		shmctl(shmid, IPC_RMID, NULL);
-		exit(2);
-	}
-	printf("shmaddr: %p\n", shmaddr);
-
-	dprintf("Starting the writes:\n");
-	for (i = 0; i < LENGTH; i++) {
-		shmaddr[i] = (char)(i);
-		if (!(i % (1024 * 1024)))
-			dprintf(".");
-	}
-	dprintf("\n");
-
-	dprintf("Starting the Check...");
-	for (i = 0; i < LENGTH; i++)
-		if (shmaddr[i] != (char)i)
-			printf("\nIndex %lu mismatched\n", i);
-	dprintf("Done.\n");
-
-	if (shmdt((const void *)shmaddr) != 0) {
-		perror("Detach failure");
-		shmctl(shmid, IPC_RMID, NULL);
-		exit(3);
-	}
-
-	shmctl(shmid, IPC_RMID, NULL);
-
-	return 0;
-}
 
 *******************************************************************
 
 /*
- * Example of using huge page memory in a user application using the mmap
- * system call.  Before running this application, make sure that the
- * administrator has mounted the hugetlbfs filesystem (on some directory
- * like /mnt) using the command mount -t hugetlbfs nodev /mnt. In this
- * example, the app is requesting memory of size 256MB that is backed by
- * huge pages.
- *
- * For the ia64 architecture, the Linux kernel reserves Region number 4 for
- * huge pages.  That means that if one requires a fixed address, a huge page
- * aligned address starting with 0x800000... will be required.  If a fixed
- * address is not required, the kernel will select an address in the proper
- * range.
- * Other architectures, such as ppc64, i386 or x86_64 are not so constrained.
+ * hugepage-mmap:  see Documentation/vm/hugepage-mmap.c
  */
-#include <stdlib.h>
-#include <stdio.h>
-#include <unistd.h>
-#include <sys/mman.h>
-#include <fcntl.h>
-
-#define FILE_NAME "/mnt/hugepagefile"
-#define LENGTH (256UL*1024*1024)
-#define PROTECTION (PROT_READ | PROT_WRITE)
-
-#define ADDR (void *)(0x0UL)	/* let kernel choose address */
-#define FLAGS (MAP_SHARED)
-
-void check_bytes(char *addr)
-{
-	printf("First hex is %x\n", *((unsigned int *)addr));
-}
-
-void write_bytes(char *addr)
-{
-	unsigned long i;
-
-	for (i = 0; i < LENGTH; i++)
-		*(addr + i) = (char)i;
-}
-
-void read_bytes(char *addr)
-{
-	unsigned long i;
-
-	check_bytes(addr);
-	for (i = 0; i < LENGTH; i++)
-		if (*(addr + i) != (char)i) {
-			printf("Mismatch at %lu\n", i);
-			break;
-		}
-}
-
-int main(void)
-{
-	void *addr;
-	int fd;
-
-	fd = open(FILE_NAME, O_CREAT | O_RDWR, 0755);
-	if (fd < 0) {
-		perror("Open failed");
-		exit(1);
-	}
-
-	addr = mmap(ADDR, LENGTH, PROTECTION, FLAGS, fd, 0);
-	if (addr == MAP_FAILED) {
-		perror("mmap");
-		unlink(FILE_NAME);
-		exit(1);
-	}
-
-	printf("Returned address is %p\n", addr);
-	check_bytes(addr);
-	write_bytes(addr);
-	read_bytes(addr);
-
-	munmap(addr, LENGTH);
-	close(fd);
-	unlink(FILE_NAME);
-
-	return 0;
-}
diff --git a/Documentation/vm/map_hugetlb.c b/Documentation/vm/map_hugetlb.c
index e2bdae37f499..9969c7d9f985 100644
--- a/Documentation/vm/map_hugetlb.c
+++ b/Documentation/vm/map_hugetlb.c
@@ -31,12 +31,12 @@
 #define FLAGS (MAP_PRIVATE | MAP_ANONYMOUS | MAP_HUGETLB)
 #endif
 
-void check_bytes(char *addr)
+static void check_bytes(char *addr)
 {
 	printf("First hex is %x\n", *((unsigned int *)addr));
 }
 
-void write_bytes(char *addr)
+static void write_bytes(char *addr)
 {
 	unsigned long i;
 
@@ -44,7 +44,7 @@ void write_bytes(char *addr)
 		*(addr + i) = (char)i;
 }
 
-void read_bytes(char *addr)
+static void read_bytes(char *addr)
 {
 	unsigned long i;
 
diff --git a/Documentation/voyager.txt b/Documentation/voyager.txt
deleted file mode 100644
index 2749af552cdf..000000000000
--- a/Documentation/voyager.txt
+++ /dev/null
@@ -1,95 +0,0 @@
-Running Linux on the Voyager Architecture
-=========================================
-
-For full details and current project status, see
-
-http://www.hansenpartnership.com/voyager
-
-The voyager architecture was designed by NCR in the mid 80s to be a
-fully SMP capable RAS computing architecture built around intel's 486
-chip set.  The voyager came in three levels of architectural
-sophistication: 3,4 and 5 --- 1 and 2 never made it out of prototype.
-The linux patches support only the Level 5 voyager architecture (any
-machine class 3435 and above).
-
-The Voyager Architecture
-------------------------
-
-Voyager machines consist of a Baseboard with a 386 diagnostic
-processor, a Power Supply Interface (PSI) a Primary and possibly
-Secondary Microchannel bus and between 2 and 20 voyager slots.  The
-voyager slots can be populated with memory and cpu cards (up to 4GB
-memory and from 1 486 to 32 Pentium Pro processors).  Internally, the
-voyager has a dual arbitrated system bus and a configuration and test
-bus (CAT).  The voyager bus speed is 40MHz.  Therefore (since all
-voyager cards are dual ported for each system bus) the maximum
-transfer rate is 320Mb/s but only if you have your slot configuration
-tuned (only memory cards can communicate with both busses at once, CPU
-cards utilise them one at a time).
-
-Voyager SMP
------------
-
-Since voyager was the first intel based SMP system, it is slightly
-more primitive than the Intel IO-APIC approach to SMP.  Voyager allows
-arbitrary interrupt routing (including processor affinity routing) of
-all 16 PC type interrupts.  However it does this by using a modified
-5259 master/slave chip set instead of an APIC bus.  Additionally,
-voyager supports Cross Processor Interrupts (CPI) equivalent to the
-APIC IPIs.  There are two routed voyager interrupt lines provided to
-each slot.
-
-Processor Cards
----------------
-
-These come in single, dyadic and quad configurations (the quads are
-problematic--see later).  The maximum configuration is 8 quad cards
-for 32 way SMP.
-
-Quad Processors
----------------
-
-Because voyager only supplies two interrupt lines to each Processor
-card, the Quad processors have to be configured (and Bootstrapped) in
-as a pair of Master/Slave processors.
-
-In fact, most Quad cards only accept one VIC interrupt line, so they
-have one interrupt handling processor (called the VIC extended
-processor) and three non-interrupt handling processors.
-
-Current Status
---------------
-
-The System will boot on Mono, Dyad and Quad cards.  There was
-originally a Quad boot problem which has been fixed by proper gdt
-alignment in the initial boot loader.  If you still cannot get your
-voyager system to boot, email me at:
-
-<J.E.J.Bottomley@HansenPartnership.com>
-
-
-The Quad cards now support using the separate Quad CPI vectors instead
-of going through the VIC mailbox system.
-
-The Level 4 architecture (3430 and 3360 Machines) should also work
-fine.
-
-Dump Switch
------------
-
-The voyager dump switch sends out a broadcast NMI which the voyager
-code intercepts and does a task dump.
-
-Power Switch
-------------
-
-The front panel power switch is intercepted by the kernel and should
-cause a system shutdown and power off.
-
-A Note About Mixed CPU Systems
-------------------------------
-
-Linux isn't designed to handle mixed CPU systems very well.  In order
-to get everything going you *must* make sure that your lowest
-capability CPU is used for booting.  Also, mixing CPU classes
-(e.g. 486 and 586) is really not going to work very well at all.
diff --git a/MAINTAINERS b/MAINTAINERS
index c8a8b1fd58b3..449d44402083 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -666,6 +666,12 @@ T:	git://git.pengutronix.de/git/imx/linux-2.6.git
 F:	arch/arm/mach-mx*/
 F:	arch/arm/plat-mxc/
 
+ARM/FREESCALE IMX51
+M:	Amit Kucheria <amit.kucheria@canonical.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm/mach-mx5/
+
 ARM/GLOMATION GESBC9312SX MACHINE SUPPORT
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -939,6 +945,16 @@ W:	http://www.fluff.org/ben/linux/
 S:	Maintained
 F:	arch/arm/mach-s3c6410/
 
+ARM/SHMOBILE ARM ARCHITECTURE
+M:	Paul Mundt <lethal@linux-sh.org>
+M:	Magnus Damm <magnus.damm@gmail.com>
+L:	linux-sh@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/genesis-2.6.git
+W:	http://oss.renesas.com
+S:	Supported
+F:	arch/arm/mach-shmobile/
+F:	drivers/sh/
+
 ARM/TECHNOLOGIC SYSTEMS TS7250 MACHINE SUPPORT
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1235,6 +1251,13 @@ W:	http://blackfin.uclinux.org
 S:	Supported
 F:	drivers/rtc/rtc-bfin.c
 
+BLACKFIN SDH DRIVER
+M:	Cliff Cai <cliff.cai@analog.com>
+L:	uclinux-dist-devel@blackfin.uclinux.org
+W:	http://blackfin.uclinux.org
+S:	Supported
+F:	drivers/mmc/host/bfin_sdh.c
+
 BLACKFIN SERIAL DRIVER
 M:	Sonic Zhang <sonic.zhang@analog.com>
 L:	uclinux-dist-devel@blackfin.uclinux.org
@@ -1382,20 +1405,30 @@ F:	arch/x86/include/asm/calgary.h
 F:	arch/x86/include/asm/tce.h
 
 CAN NETWORK LAYER
-M:	Urs Thuermann <urs.thuermann@volkswagen.de>
+M:	Oliver Hartkopp <socketcan@hartkopp.net>
 M:	Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
-L:	socketcan-core@lists.berlios.de (subscribers-only)
+M:	Urs Thuermann <urs.thuermann@volkswagen.de>
+L:	socketcan-core@lists.berlios.de
+L:	netdev@vger.kernel.org
 W:	http://developer.berlios.de/projects/socketcan/
 S:	Maintained
-F:	drivers/net/can/
-F:	include/linux/can/
+F:	net/can/
 F:	include/linux/can.h
+F:	include/linux/can/core.h
+F:	include/linux/can/bcm.h
+F:	include/linux/can/raw.h
 
 CAN NETWORK DRIVERS
 M:	Wolfgang Grandegger <wg@grandegger.com>
-L:	socketcan-core@lists.berlios.de (subscribers-only)
+L:	socketcan-core@lists.berlios.de
+L:	netdev@vger.kernel.org
 W:	http://developer.berlios.de/projects/socketcan/
 S:	Maintained
+F:	drivers/net/can/
+F:	include/linux/can/dev.h
+F:	include/linux/can/error.h
+F:	include/linux/can/netlink.h
+F:	include/linux/can/platform/
 
 CELL BROADBAND ENGINE ARCHITECTURE
 M:	Arnd Bergmann <arnd@arndb.de>
@@ -1408,6 +1441,15 @@ F:	arch/powerpc/include/asm/spu*.h
 F:	arch/powerpc/oprofile/*cell*
 F:	arch/powerpc/platforms/cell/
 
+CEPH DISTRIBUTED FILE SYSTEM CLIENT
+M:	Sage Weil <sage@newdream.net>
+L:	ceph-devel@lists.sourceforge.net
+W:	http://ceph.newdream.net/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client.git
+S:	Supported
+F:	Documentation/filesystems/ceph.txt
+F:	fs/ceph
+
 CERTIFIED WIRELESS USB (WUSB) SUBSYSTEM:
 M:	David Vrabel <david.vrabel@csr.com>
 L:	linux-usb@vger.kernel.org
@@ -2107,6 +2149,7 @@ F:	drivers/net/eexpress.*
 ETHERNET BRIDGE
 M:	Stephen Hemminger <shemminger@linux-foundation.org>
 L:	bridge@lists.linux-foundation.org
+L:	netdev@vger.kernel.org
 W:	http://www.linux-foundation.org/en/Net:Bridge
 S:	Maintained
 F:	include/linux/netfilter_bridge/
@@ -2804,7 +2847,7 @@ S:	Maintained
 F:	drivers/input/
 
 INTEL FRAMEBUFFER DRIVER (excluding 810 and 815)
-M:	Sylvain Meyer <sylvain.meyer@worldonline.fr>
+M:	Maik Broemme <mbroemme@plusserver.de>
 L:	linux-fbdev@vger.kernel.org
 S:	Maintained
 F:	Documentation/fb/intelfb.txt
@@ -3621,7 +3664,7 @@ F:	mm/
 
 MEMORY RESOURCE CONTROLLER
 M:	Balbir Singh <balbir@linux.vnet.ibm.com>
-M:	Pavel Emelyanov <xemul@openvz.org>
+M:	Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
 M:	KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
 L:	linux-mm@kvack.org
 S:	Maintained
@@ -4293,6 +4336,7 @@ PERFORMANCE EVENTS SUBSYSTEM
 M:	Peter Zijlstra <a.p.zijlstra@chello.nl>
 M:	Paul Mackerras <paulus@samba.org>
 M:	Ingo Molnar <mingo@elte.hu>
+M:	Arnaldo Carvalho de Melo <acme@redhat.com>
 S:	Supported
 F:	kernel/perf_event.c
 F:	include/linux/perf_event.h
@@ -4495,6 +4539,13 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git
 S:	Maintained
 
+MMP2 SUPPORT (aka ARMADA610)
+M:	Haojian Zhuang <haojian.zhuang@marvell.com>
+M:	Eric Miao <eric.y.miao@gmail.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git
+S:	Maintained
+
 PXA MMCI DRIVER
 S:	Orphan
 
@@ -5172,6 +5223,21 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6.git
 S:	Maintained
 F:	arch/sparc/
 
+SPARC SERIAL DRIVERS
+M:	"David S. Miller" <davem@davemloft.net>
+L:	sparclinux@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6.git
+S:	Maintained
+F:	drivers/serial/suncore.c
+F:	drivers/serial/suncore.h
+F:	drivers/serial/sunhv.c
+F:	drivers/serial/sunsab.c
+F:	drivers/serial/sunsab.h
+F:	drivers/serial/sunsu.c
+F:	drivers/serial/sunzilog.c
+F:	drivers/serial/sunzilog.h
+
 SPECIALIX IO8+ MULTIPORT SERIAL CARD DRIVER
 M:	Roger Wolff <R.E.Wolff@BitWizard.nl>
 S:	Supported
diff --git a/Makefile b/Makefile
index 1b24895212d8..08ff02da7ce3 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
-SUBLEVEL = 33
-EXTRAVERSION =
+SUBLEVEL = 34
+EXTRAVERSION = -rc1
 NAME = Man-Eating Seals of Antiquity
 
 # *DOCUMENTATION*
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index bd7261ea8f94..75291fdd379f 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -10,6 +10,7 @@ config ALPHA
 	select HAVE_OPROFILE
 	select HAVE_SYSCALL_WRAPPERS
 	select HAVE_PERF_EVENTS
+	select HAVE_DMA_ATTRS
 	help
 	  The Alpha is a 64-bit general-purpose processor designed and
 	  marketed by the Digital Equipment Corporation of blessed memory,
@@ -58,6 +59,9 @@ config ZONE_DMA
 	bool
 	default y
 
+config NEED_DMA_MAP_STATE
+       def_bool y
+
 config GENERIC_ISA_DMA
 	bool
 	default y
diff --git a/arch/alpha/include/asm/core_marvel.h b/arch/alpha/include/asm/core_marvel.h
index 30d55fe7aaf6..dad300fa14ce 100644
--- a/arch/alpha/include/asm/core_marvel.h
+++ b/arch/alpha/include/asm/core_marvel.h
@@ -12,7 +12,6 @@
 #define __ALPHA_MARVEL__H__
 
 #include <linux/types.h>
-#include <linux/pci.h>
 #include <linux/spinlock.h>
 
 #include <asm/compiler.h>
diff --git a/arch/alpha/include/asm/core_mcpcia.h b/arch/alpha/include/asm/core_mcpcia.h
index acf55b483472..21ac53383b37 100644
--- a/arch/alpha/include/asm/core_mcpcia.h
+++ b/arch/alpha/include/asm/core_mcpcia.h
@@ -6,7 +6,6 @@
 #define MCPCIA_ONE_HAE_WINDOW 1
 
 #include <linux/types.h>
-#include <linux/pci.h>
 #include <asm/compiler.h>
 
 /*
diff --git a/arch/alpha/include/asm/core_titan.h b/arch/alpha/include/asm/core_titan.h
index a17f6f33b68e..8cf79d1219e1 100644
--- a/arch/alpha/include/asm/core_titan.h
+++ b/arch/alpha/include/asm/core_titan.h
@@ -2,7 +2,6 @@
 #define __ALPHA_TITAN__H__
 
 #include <linux/types.h>
-#include <linux/pci.h>
 #include <asm/compiler.h>
 
 /*
diff --git a/arch/alpha/include/asm/core_tsunami.h b/arch/alpha/include/asm/core_tsunami.h
index 58d4fe48742c..8e39ecf09419 100644
--- a/arch/alpha/include/asm/core_tsunami.h
+++ b/arch/alpha/include/asm/core_tsunami.h
@@ -2,7 +2,6 @@
 #define __ALPHA_TSUNAMI__H__
 
 #include <linux/types.h>
-#include <linux/pci.h>
 #include <asm/compiler.h>
 
 /*
diff --git a/arch/alpha/include/asm/dma-mapping.h b/arch/alpha/include/asm/dma-mapping.h
index 04eb5681448c..1bce8169733c 100644
--- a/arch/alpha/include/asm/dma-mapping.h
+++ b/arch/alpha/include/asm/dma-mapping.h
@@ -1,71 +1,49 @@
 #ifndef _ALPHA_DMA_MAPPING_H
 #define _ALPHA_DMA_MAPPING_H
 
+#include <linux/dma-attrs.h>
 
-#ifdef CONFIG_PCI
+extern struct dma_map_ops *dma_ops;
 
-#include <linux/pci.h>
+static inline struct dma_map_ops *get_dma_ops(struct device *dev)
+{
+	return dma_ops;
+}
 
-#define dma_map_single(dev, va, size, dir)		\
-		pci_map_single(alpha_gendev_to_pci(dev), va, size, dir)
-#define dma_unmap_single(dev, addr, size, dir)		\
-		pci_unmap_single(alpha_gendev_to_pci(dev), addr, size, dir)
-#define dma_alloc_coherent(dev, size, addr, gfp)	\
-	      __pci_alloc_consistent(alpha_gendev_to_pci(dev), size, addr, gfp)
-#define dma_free_coherent(dev, size, va, addr)		\
-		pci_free_consistent(alpha_gendev_to_pci(dev), size, va, addr)
-#define dma_map_page(dev, page, off, size, dir)		\
-		pci_map_page(alpha_gendev_to_pci(dev), page, off, size, dir)
-#define dma_unmap_page(dev, addr, size, dir)		\
-		pci_unmap_page(alpha_gendev_to_pci(dev), addr, size, dir)
-#define dma_map_sg(dev, sg, nents, dir)			\
-		pci_map_sg(alpha_gendev_to_pci(dev), sg, nents, dir)
-#define dma_unmap_sg(dev, sg, nents, dir)		\
-		pci_unmap_sg(alpha_gendev_to_pci(dev), sg, nents, dir)
-#define dma_supported(dev, mask)			\
-		pci_dma_supported(alpha_gendev_to_pci(dev), mask)
-#define dma_mapping_error(dev, addr)				\
-		pci_dma_mapping_error(alpha_gendev_to_pci(dev), addr)
+#include <asm-generic/dma-mapping-common.h>
 
-#else	/* no PCI - no IOMMU. */
+static inline void *dma_alloc_coherent(struct device *dev, size_t size,
+				       dma_addr_t *dma_handle, gfp_t gfp)
+{
+	return get_dma_ops(dev)->alloc_coherent(dev, size, dma_handle, gfp);
+}
 
-#include <asm/io.h>	/* for virt_to_phys() */
+static inline void dma_free_coherent(struct device *dev, size_t size,
+				     void *vaddr, dma_addr_t dma_handle)
+{
+	get_dma_ops(dev)->free_coherent(dev, size, vaddr, dma_handle);
+}
 
-struct scatterlist;
-void *dma_alloc_coherent(struct device *dev, size_t size,
-			 dma_addr_t *dma_handle, gfp_t gfp);
-int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
-	       enum dma_data_direction direction);
+static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+	return get_dma_ops(dev)->mapping_error(dev, dma_addr);
+}
 
-#define dma_free_coherent(dev, size, va, addr)		\
-		free_pages((unsigned long)va, get_order(size))
-#define dma_supported(dev, mask)		(mask < 0x00ffffffUL ? 0 : 1)
-#define dma_map_single(dev, va, size, dir)	virt_to_phys(va)
-#define dma_map_page(dev, page, off, size, dir)	(page_to_pa(page) + off)
+static inline int dma_supported(struct device *dev, u64 mask)
+{
+	return get_dma_ops(dev)->dma_supported(dev, mask);
+}
 
-#define dma_unmap_single(dev, addr, size, dir)	((void)0)
-#define dma_unmap_page(dev, addr, size, dir)	((void)0)
-#define dma_unmap_sg(dev, sg, nents, dir)	((void)0)
-
-#define dma_mapping_error(dev, addr)  (0)
-
-#endif	/* !CONFIG_PCI */
+static inline int dma_set_mask(struct device *dev, u64 mask)
+{
+	return get_dma_ops(dev)->set_dma_mask(dev, mask);
+}
 
 #define dma_alloc_noncoherent(d, s, h, f)	dma_alloc_coherent(d, s, h, f)
 #define dma_free_noncoherent(d, s, v, h)	dma_free_coherent(d, s, v, h)
 #define dma_is_consistent(d, h)			(1)
 
-int dma_set_mask(struct device *dev, u64 mask);
-
-#define dma_sync_single_for_cpu(dev, addr, size, dir)	  ((void)0)
-#define dma_sync_single_for_device(dev, addr, size, dir)  ((void)0)
-#define dma_sync_single_range(dev, addr, off, size, dir)  ((void)0)
-#define dma_sync_sg_for_cpu(dev, sg, nents, dir)	  ((void)0)
-#define dma_sync_sg_for_device(dev, sg, nents, dir)	  ((void)0)
 #define dma_cache_sync(dev, va, size, dir)		  ((void)0)
-#define dma_sync_single_range_for_cpu(dev, addr, offset, size, dir)	((void)0)
-#define dma_sync_single_range_for_device(dev, addr, offset, size, dir)	((void)0)
-
 #define dma_get_cache_alignment()			  L1_CACHE_BYTES
 
 #endif	/* _ALPHA_DMA_MAPPING_H */
diff --git a/arch/alpha/include/asm/pci.h b/arch/alpha/include/asm/pci.h
index dd8dcabf160f..28d0497fd3c7 100644
--- a/arch/alpha/include/asm/pci.h
+++ b/arch/alpha/include/asm/pci.h
@@ -70,142 +70,11 @@ extern inline void pcibios_penalize_isa_irq(int irq, int active)
    decisions.  */
 #define PCI_DMA_BUS_IS_PHYS  0
 
-/* Allocate and map kernel buffer using consistent mode DMA for PCI
-   device.  Returns non-NULL cpu-view pointer to the buffer if
-   successful and sets *DMA_ADDRP to the pci side dma address as well,
-   else DMA_ADDRP is undefined.  */
-
-extern void *__pci_alloc_consistent(struct pci_dev *, size_t,
-				    dma_addr_t *, gfp_t);
-static inline void *
-pci_alloc_consistent(struct pci_dev *dev, size_t size, dma_addr_t *dma)
-{
-	return __pci_alloc_consistent(dev, size, dma, GFP_ATOMIC);
-}
-
-/* Free and unmap a consistent DMA buffer.  CPU_ADDR and DMA_ADDR must
-   be values that were returned from pci_alloc_consistent.  SIZE must
-   be the same as what as passed into pci_alloc_consistent.
-   References to the memory and mappings associated with CPU_ADDR or
-   DMA_ADDR past this call are illegal.  */
-
-extern void pci_free_consistent(struct pci_dev *, size_t, void *, dma_addr_t);
-
-/* Map a single buffer of the indicate size for PCI DMA in streaming mode.
-   The 32-bit PCI bus mastering address to use is returned.  Once the device
-   is given the dma address, the device owns this memory until either
-   pci_unmap_single or pci_dma_sync_single_for_cpu is performed.  */
-
-extern dma_addr_t pci_map_single(struct pci_dev *, void *, size_t, int);
-
-/* Likewise, but for a page instead of an address.  */
-extern dma_addr_t pci_map_page(struct pci_dev *, struct page *,
-			       unsigned long, size_t, int);
-
-/* Test for pci_map_single or pci_map_page having generated an error.  */
-
-static inline int
-pci_dma_mapping_error(struct pci_dev *pdev, dma_addr_t dma_addr)
-{
-	return dma_addr == 0;
-}
-
-/* Unmap a single streaming mode DMA translation.  The DMA_ADDR and
-   SIZE must match what was provided for in a previous pci_map_single
-   call.  All other usages are undefined.  After this call, reads by
-   the cpu to the buffer are guaranteed to see whatever the device
-   wrote there.  */
-
-extern void pci_unmap_single(struct pci_dev *, dma_addr_t, size_t, int);
-extern void pci_unmap_page(struct pci_dev *, dma_addr_t, size_t, int);
-
-/* pci_unmap_{single,page} is not a nop, thus... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
-	dma_addr_t ADDR_NAME;
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
-	__u32 LEN_NAME;
-#define pci_unmap_addr(PTR, ADDR_NAME)			\
-	((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
-	(((PTR)->ADDR_NAME) = (VAL))
-#define pci_unmap_len(PTR, LEN_NAME)			\
-	((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
-	(((PTR)->LEN_NAME) = (VAL))
-
-/* Map a set of buffers described by scatterlist in streaming mode for
-   PCI DMA.  This is the scatter-gather version of the above
-   pci_map_single interface.  Here the scatter gather list elements
-   are each tagged with the appropriate PCI dma address and length.
-   They are obtained via sg_dma_{address,length}(SG).
-
-   NOTE: An implementation may be able to use a smaller number of DMA
-   address/length pairs than there are SG table elements.  (for
-   example via virtual mapping capabilities) The routine returns the
-   number of addr/length pairs actually used, at most nents.
-
-   Device ownership issues as mentioned above for pci_map_single are
-   the same here.  */
-
-extern int pci_map_sg(struct pci_dev *, struct scatterlist *, int, int);
-
-/* Unmap a set of streaming mode DMA translations.  Again, cpu read
-   rules concerning calls here are the same as for pci_unmap_single()
-   above.  */
-
-extern void pci_unmap_sg(struct pci_dev *, struct scatterlist *, int, int);
-
-/* Make physical memory consistent for a single streaming mode DMA
-   translation after a transfer and device currently has ownership
-   of the buffer.
-
-   If you perform a pci_map_single() but wish to interrogate the
-   buffer using the cpu, yet do not wish to teardown the PCI dma
-   mapping, you must call this function before doing so.  At the next
-   point you give the PCI dma address back to the card, you must first
-   perform a pci_dma_sync_for_device, and then the device again owns
-   the buffer.  */
-
-static inline void
-pci_dma_sync_single_for_cpu(struct pci_dev *dev, dma_addr_t dma_addr,
-			    long size, int direction)
-{
-	/* Nothing to do.  */
-}
-
-static inline void
-pci_dma_sync_single_for_device(struct pci_dev *dev, dma_addr_t dma_addr,
-			       size_t size, int direction)
-{
-	/* Nothing to do.  */
-}
-
-/* Make physical memory consistent for a set of streaming mode DMA
-   translations after a transfer.  The same as pci_dma_sync_single_*
-   but for a scatter-gather list, same rules and usage.  */
-
-static inline void
-pci_dma_sync_sg_for_cpu(struct pci_dev *dev, struct scatterlist *sg,
-			int nents, int direction)
-{
-	/* Nothing to do.  */
-}
-
-static inline void
-pci_dma_sync_sg_for_device(struct pci_dev *dev, struct scatterlist *sg,
-			   int nents, int direction)
-{
-	/* Nothing to do.  */
-}
-
-/* Return whether the given PCI device DMA address mask can
-   be supported properly.  For example, if your device can
-   only drive the low 24-bits during PCI bus mastering, then
-   you would pass 0x00ffffff as the mask to this function.  */
+#ifdef CONFIG_PCI
 
-extern int pci_dma_supported(struct pci_dev *hwdev, u64 mask);
+/* implement the pci_ DMA API in terms of the generic device dma_ one */
+#include <asm-generic/pci-dma-compat.h>
 
-#ifdef CONFIG_PCI
 static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 					enum pci_dma_burst_strategy *strat,
 					unsigned long *strategy_parameter)
@@ -244,8 +113,6 @@ static inline int pci_proc_domain(struct pci_bus *bus)
 	return hose->need_domain_info;
 }
 
-struct pci_dev *alpha_gendev_to_pci(struct device *dev);
-
 #endif /* __KERNEL__ */
 
 /* Values for the `which' argument to sys_pciconfig_iobase.  */
diff --git a/arch/alpha/include/asm/ptrace.h b/arch/alpha/include/asm/ptrace.h
index 32c7a5cddd59..65cf3e28e2f4 100644
--- a/arch/alpha/include/asm/ptrace.h
+++ b/arch/alpha/include/asm/ptrace.h
@@ -68,6 +68,7 @@ struct switch_stack {
 
 #ifdef __KERNEL__
 
+#define arch_has_single_step()		(1)
 #define user_mode(regs) (((regs)->ps & 8) != 0)
 #define instruction_pointer(regs) ((regs)->pc)
 #define profile_pc(regs) instruction_pointer(regs)
diff --git a/arch/alpha/kernel/pci-noop.c b/arch/alpha/kernel/pci-noop.c
index c19a376520f4..823a540f9f5b 100644
--- a/arch/alpha/kernel/pci-noop.c
+++ b/arch/alpha/kernel/pci-noop.c
@@ -106,58 +106,8 @@ sys_pciconfig_write(unsigned long bus, unsigned long dfn,
 		return -ENODEV;
 }
 
-/* Stubs for the routines in pci_iommu.c: */
-
-void *
-__pci_alloc_consistent(struct pci_dev *pdev, size_t size,
-		       dma_addr_t *dma_addrp, gfp_t gfp)
-{
-	return NULL;
-}
-
-void
-pci_free_consistent(struct pci_dev *pdev, size_t size, void *cpu_addr,
-		    dma_addr_t dma_addr)
-{
-}
-
-dma_addr_t
-pci_map_single(struct pci_dev *pdev, void *cpu_addr, size_t size,
-	       int direction)
-{
-	return (dma_addr_t) 0;
-}
-
-void
-pci_unmap_single(struct pci_dev *pdev, dma_addr_t dma_addr, size_t size,
-		 int direction)
-{
-}
-
-int
-pci_map_sg(struct pci_dev *pdev, struct scatterlist *sg, int nents,
-	   int direction)
-{
-	return 0;
-}
-
-void
-pci_unmap_sg(struct pci_dev *pdev, struct scatterlist *sg, int nents,
-	     int direction)
-{
-}
-
-int
-pci_dma_supported(struct pci_dev *hwdev, dma_addr_t mask)
-{
-	return 0;
-}
-
-/* Generic DMA mapping functions: */
-
-void *
-dma_alloc_coherent(struct device *dev, size_t size,
-		   dma_addr_t *dma_handle, gfp_t gfp)
+static void *alpha_noop_alloc_coherent(struct device *dev, size_t size,
+				       dma_addr_t *dma_handle, gfp_t gfp)
 {
 	void *ret;
 
@@ -171,11 +121,22 @@ dma_alloc_coherent(struct device *dev, size_t size,
 	return ret;
 }
 
-EXPORT_SYMBOL(dma_alloc_coherent);
+static void alpha_noop_free_coherent(struct device *dev, size_t size,
+				     void *cpu_addr, dma_addr_t dma_addr)
+{
+	free_pages((unsigned long)cpu_addr, get_order(size));
+}
+
+static dma_addr_t alpha_noop_map_page(struct device *dev, struct page *page,
+				      unsigned long offset, size_t size,
+				      enum dma_data_direction dir,
+				      struct dma_attrs *attrs)
+{
+	return page_to_pa(page) + offset;
+}
 
-int
-dma_map_sg(struct device *dev, struct scatterlist *sgl, int nents,
-	   enum dma_data_direction direction)
+static int alpha_noop_map_sg(struct device *dev, struct scatterlist *sgl, int nents,
+			     enum dma_data_direction dir, struct dma_attrs *attrs)
 {
 	int i;
 	struct scatterlist *sg;
@@ -192,19 +153,37 @@ dma_map_sg(struct device *dev, struct scatterlist *sgl, int nents,
 	return nents;
 }
 
-EXPORT_SYMBOL(dma_map_sg);
+static int alpha_noop_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+	return 0;
+}
+
+static int alpha_noop_supported(struct device *dev, u64 mask)
+{
+	return mask < 0x00ffffffUL ? 0 : 1;
+}
 
-int
-dma_set_mask(struct device *dev, u64 mask)
+static int alpha_noop_set_mask(struct device *dev, u64 mask)
 {
 	if (!dev->dma_mask || !dma_supported(dev, mask))
 		return -EIO;
 
 	*dev->dma_mask = mask;
-
 	return 0;
 }
-EXPORT_SYMBOL(dma_set_mask);
+
+struct dma_map_ops alpha_noop_ops = {
+	.alloc_coherent		= alpha_noop_alloc_coherent,
+	.free_coherent		= alpha_noop_free_coherent,
+	.map_page		= alpha_noop_map_page,
+	.map_sg			= alpha_noop_map_sg,
+	.mapping_error		= alpha_noop_mapping_error,
+	.dma_supported		= alpha_noop_supported,
+	.set_dma_mask		= alpha_noop_set_mask,
+};
+
+struct dma_map_ops *dma_ops = &alpha_noop_ops;
+EXPORT_SYMBOL(dma_ops);
 
 void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen)
 {
diff --git a/arch/alpha/kernel/pci_iommu.c b/arch/alpha/kernel/pci_iommu.c
index 8449504f5e0b..ce9e54c887fa 100644
--- a/arch/alpha/kernel/pci_iommu.c
+++ b/arch/alpha/kernel/pci_iommu.c
@@ -216,10 +216,30 @@ iommu_arena_free(struct pci_iommu_arena *arena, long ofs, long n)
 	for (i = 0; i < n; ++i)
 		p[i] = 0;
 }
-
-/* True if the machine supports DAC addressing, and DEV can
-   make use of it given MASK.  */
-static int pci_dac_dma_supported(struct pci_dev *hwdev, u64 mask);
+
+/*
+ * True if the machine supports DAC addressing, and DEV can
+ * make use of it given MASK.
+ */
+static int pci_dac_dma_supported(struct pci_dev *dev, u64 mask)
+{
+	dma64_addr_t dac_offset = alpha_mv.pci_dac_offset;
+	int ok = 1;
+
+	/* If this is not set, the machine doesn't support DAC at all.  */
+	if (dac_offset == 0)
+		ok = 0;
+
+	/* The device has to be able to address our DAC bit.  */
+	if ((dac_offset & dev->dma_mask) != dac_offset)
+		ok = 0;
+
+	/* If both conditions above are met, we are fine. */
+	DBGA("pci_dac_dma_supported %s from %p\n",
+	     ok ? "yes" : "no", __builtin_return_address(0));
+
+	return ok;
+}
 
 /* Map a single buffer of the indicated size for PCI DMA in streaming
    mode.  The 32-bit PCI bus mastering address to use is returned.
@@ -301,23 +321,36 @@ pci_map_single_1(struct pci_dev *pdev, void *cpu_addr, size_t size,
 	return ret;
 }
 
-dma_addr_t
-pci_map_single(struct pci_dev *pdev, void *cpu_addr, size_t size, int dir)
+/* Helper for generic DMA-mapping functions. */
+static struct pci_dev *alpha_gendev_to_pci(struct device *dev)
 {
-	int dac_allowed; 
+	if (dev && dev->bus == &pci_bus_type)
+		return to_pci_dev(dev);
 
-	if (dir == PCI_DMA_NONE)
-		BUG();
+	/* Assume that non-PCI devices asking for DMA are either ISA or EISA,
+	   BUG() otherwise. */
+	BUG_ON(!isa_bridge);
 
-	dac_allowed = pdev ? pci_dac_dma_supported(pdev, pdev->dma_mask) : 0; 
-	return pci_map_single_1(pdev, cpu_addr, size, dac_allowed);
+	/* Assume non-busmaster ISA DMA when dma_mask is not set (the ISA
+	   bridge is bus master then). */
+	if (!dev || !dev->dma_mask || !*dev->dma_mask)
+		return isa_bridge;
+
+	/* For EISA bus masters, return isa_bridge (it might have smaller
+	   dma_mask due to wiring limitations). */
+	if (*dev->dma_mask >= isa_bridge->dma_mask)
+		return isa_bridge;
+
+	/* This assumes ISA bus master with dma_mask 0xffffff. */
+	return NULL;
 }
-EXPORT_SYMBOL(pci_map_single);
 
-dma_addr_t
-pci_map_page(struct pci_dev *pdev, struct page *page, unsigned long offset,
-	     size_t size, int dir)
+static dma_addr_t alpha_pci_map_page(struct device *dev, struct page *page,
+				     unsigned long offset, size_t size,
+				     enum dma_data_direction dir,
+				     struct dma_attrs *attrs)
 {
+	struct pci_dev *pdev = alpha_gendev_to_pci(dev);
 	int dac_allowed;
 
 	if (dir == PCI_DMA_NONE)
@@ -327,7 +360,6 @@ pci_map_page(struct pci_dev *pdev, struct page *page, unsigned long offset,
 	return pci_map_single_1(pdev, (char *)page_address(page) + offset, 
 				size, dac_allowed);
 }
-EXPORT_SYMBOL(pci_map_page);
 
 /* Unmap a single streaming mode DMA translation.  The DMA_ADDR and
    SIZE must match what was provided for in a previous pci_map_single
@@ -335,16 +367,17 @@ EXPORT_SYMBOL(pci_map_page);
    the cpu to the buffer are guaranteed to see whatever the device
    wrote there.  */
 
-void
-pci_unmap_single(struct pci_dev *pdev, dma_addr_t dma_addr, size_t size,
-		 int direction)
+static void alpha_pci_unmap_page(struct device *dev, dma_addr_t dma_addr,
+				 size_t size, enum dma_data_direction dir,
+				 struct dma_attrs *attrs)
 {
 	unsigned long flags;
+	struct pci_dev *pdev = alpha_gendev_to_pci(dev);
 	struct pci_controller *hose = pdev ? pdev->sysdata : pci_isa_hose;
 	struct pci_iommu_arena *arena;
 	long dma_ofs, npages;
 
-	if (direction == PCI_DMA_NONE)
+	if (dir == PCI_DMA_NONE)
 		BUG();
 
 	if (dma_addr >= __direct_map_base
@@ -393,25 +426,16 @@ pci_unmap_single(struct pci_dev *pdev, dma_addr_t dma_addr, size_t size,
 	DBGA2("pci_unmap_single: sg [%llx,%zx] np %ld from %p\n",
 	      dma_addr, size, npages, __builtin_return_address(0));
 }
-EXPORT_SYMBOL(pci_unmap_single);
-
-void
-pci_unmap_page(struct pci_dev *pdev, dma_addr_t dma_addr,
-	       size_t size, int direction)
-{
-	pci_unmap_single(pdev, dma_addr, size, direction);
-}
-EXPORT_SYMBOL(pci_unmap_page);
 
 /* Allocate and map kernel buffer using consistent mode DMA for PCI
    device.  Returns non-NULL cpu-view pointer to the buffer if
    successful and sets *DMA_ADDRP to the pci side dma address as well,
    else DMA_ADDRP is undefined.  */
 
-void *
-__pci_alloc_consistent(struct pci_dev *pdev, size_t size,
-		       dma_addr_t *dma_addrp, gfp_t gfp)
+static void *alpha_pci_alloc_coherent(struct device *dev, size_t size,
+				      dma_addr_t *dma_addrp, gfp_t gfp)
 {
+	struct pci_dev *pdev = alpha_gendev_to_pci(dev);
 	void *cpu_addr;
 	long order = get_order(size);
 
@@ -439,13 +463,12 @@ try_again:
 		gfp |= GFP_DMA;
 		goto try_again;
 	}
-		
+
 	DBGA2("pci_alloc_consistent: %zx -> [%p,%llx] from %p\n",
 	      size, cpu_addr, *dma_addrp, __builtin_return_address(0));
 
 	return cpu_addr;
 }
-EXPORT_SYMBOL(__pci_alloc_consistent);
 
 /* Free and unmap a consistent DMA buffer.  CPU_ADDR and DMA_ADDR must
    be values that were returned from pci_alloc_consistent.  SIZE must
@@ -453,17 +476,16 @@ EXPORT_SYMBOL(__pci_alloc_consistent);
    References to the memory and mappings associated with CPU_ADDR or
    DMA_ADDR past this call are illegal.  */
 
-void
-pci_free_consistent(struct pci_dev *pdev, size_t size, void *cpu_addr,
-		    dma_addr_t dma_addr)
+static void alpha_pci_free_coherent(struct device *dev, size_t size,
+				    void *cpu_addr, dma_addr_t dma_addr)
 {
+	struct pci_dev *pdev = alpha_gendev_to_pci(dev);
 	pci_unmap_single(pdev, dma_addr, size, PCI_DMA_BIDIRECTIONAL);
 	free_pages((unsigned long)cpu_addr, get_order(size));
 
 	DBGA2("pci_free_consistent: [%llx,%zx] from %p\n",
 	      dma_addr, size, __builtin_return_address(0));
 }
-EXPORT_SYMBOL(pci_free_consistent);
 
 /* Classify the elements of the scatterlist.  Write dma_address
    of each element with:
@@ -626,23 +648,21 @@ sg_fill(struct device *dev, struct scatterlist *leader, struct scatterlist *end,
 	return 1;
 }
 
-int
-pci_map_sg(struct pci_dev *pdev, struct scatterlist *sg, int nents,
-	   int direction)
+static int alpha_pci_map_sg(struct device *dev, struct scatterlist *sg,
+			    int nents, enum dma_data_direction dir,
+			    struct dma_attrs *attrs)
 {
+	struct pci_dev *pdev = alpha_gendev_to_pci(dev);
 	struct scatterlist *start, *end, *out;
 	struct pci_controller *hose;
 	struct pci_iommu_arena *arena;
 	dma_addr_t max_dma;
 	int dac_allowed;
-	struct device *dev;
 
-	if (direction == PCI_DMA_NONE)
+	if (dir == PCI_DMA_NONE)
 		BUG();
 
-	dac_allowed = pdev ? pci_dac_dma_supported(pdev, pdev->dma_mask) : 0;
-
-	dev = pdev ? &pdev->dev : NULL;
+	dac_allowed = dev ? pci_dac_dma_supported(pdev, pdev->dma_mask) : 0;
 
 	/* Fast path single entry scatterlists.  */
 	if (nents == 1) {
@@ -699,19 +719,19 @@ pci_map_sg(struct pci_dev *pdev, struct scatterlist *sg, int nents,
 	/* Some allocation failed while mapping the scatterlist
 	   entries.  Unmap them now.  */
 	if (out > start)
-		pci_unmap_sg(pdev, start, out - start, direction);
+		pci_unmap_sg(pdev, start, out - start, dir);
 	return 0;
 }
-EXPORT_SYMBOL(pci_map_sg);
 
 /* Unmap a set of streaming mode DMA translations.  Again, cpu read
    rules concerning calls here are the same as for pci_unmap_single()
    above.  */
 
-void
-pci_unmap_sg(struct pci_dev *pdev, struct scatterlist *sg, int nents,
-	     int direction)
+static void alpha_pci_unmap_sg(struct device *dev, struct scatterlist *sg,
+			       int nents, enum dma_data_direction dir,
+			       struct dma_attrs *attrs)
 {
+	struct pci_dev *pdev = alpha_gendev_to_pci(dev);
 	unsigned long flags;
 	struct pci_controller *hose;
 	struct pci_iommu_arena *arena;
@@ -719,7 +739,7 @@ pci_unmap_sg(struct pci_dev *pdev, struct scatterlist *sg, int nents,
 	dma_addr_t max_dma;
 	dma_addr_t fbeg, fend;
 
-	if (direction == PCI_DMA_NONE)
+	if (dir == PCI_DMA_NONE)
 		BUG();
 
 	if (! alpha_mv.mv_pci_tbi)
@@ -783,15 +803,13 @@ pci_unmap_sg(struct pci_dev *pdev, struct scatterlist *sg, int nents,
 
 	DBGA("pci_unmap_sg: %ld entries\n", nents - (end - sg));
 }
-EXPORT_SYMBOL(pci_unmap_sg);
-
 
 /* Return whether the given PCI device DMA address mask can be
    supported properly.  */
 
-int
-pci_dma_supported(struct pci_dev *pdev, u64 mask)
+static int alpha_pci_supported(struct device *dev, u64 mask)
 {
+	struct pci_dev *pdev = alpha_gendev_to_pci(dev);
 	struct pci_controller *hose;
 	struct pci_iommu_arena *arena;
 
@@ -818,7 +836,6 @@ pci_dma_supported(struct pci_dev *pdev, u64 mask)
 
 	return 0;
 }
-EXPORT_SYMBOL(pci_dma_supported);
 
 
 /*
@@ -918,66 +935,32 @@ iommu_unbind(struct pci_iommu_arena *arena, long pg_start, long pg_count)
 	return 0;
 }
 
-/* True if the machine supports DAC addressing, and DEV can
-   make use of it given MASK.  */
-
-static int
-pci_dac_dma_supported(struct pci_dev *dev, u64 mask)
-{
-	dma64_addr_t dac_offset = alpha_mv.pci_dac_offset;
-	int ok = 1;
-
-	/* If this is not set, the machine doesn't support DAC at all.  */
-	if (dac_offset == 0)
-		ok = 0;
-
-	/* The device has to be able to address our DAC bit.  */
-	if ((dac_offset & dev->dma_mask) != dac_offset)
-		ok = 0;
-
-	/* If both conditions above are met, we are fine. */
-	DBGA("pci_dac_dma_supported %s from %p\n",
-	     ok ? "yes" : "no", __builtin_return_address(0));
-
-	return ok;
-}
-
-/* Helper for generic DMA-mapping functions. */
-
-struct pci_dev *
-alpha_gendev_to_pci(struct device *dev)
+static int alpha_pci_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
-	if (dev && dev->bus == &pci_bus_type)
-		return to_pci_dev(dev);
-
-	/* Assume that non-PCI devices asking for DMA are either ISA or EISA,
-	   BUG() otherwise. */
-	BUG_ON(!isa_bridge);
-
-	/* Assume non-busmaster ISA DMA when dma_mask is not set (the ISA
-	   bridge is bus master then). */
-	if (!dev || !dev->dma_mask || !*dev->dma_mask)
-		return isa_bridge;
-
-	/* For EISA bus masters, return isa_bridge (it might have smaller
-	   dma_mask due to wiring limitations). */
-	if (*dev->dma_mask >= isa_bridge->dma_mask)
-		return isa_bridge;
-
-	/* This assumes ISA bus master with dma_mask 0xffffff. */
-	return NULL;
+	return dma_addr == 0;
 }
-EXPORT_SYMBOL(alpha_gendev_to_pci);
 
-int
-dma_set_mask(struct device *dev, u64 mask)
+static int alpha_pci_set_mask(struct device *dev, u64 mask)
 {
 	if (!dev->dma_mask ||
 	    !pci_dma_supported(alpha_gendev_to_pci(dev), mask))
 		return -EIO;
 
 	*dev->dma_mask = mask;
-
 	return 0;
 }
-EXPORT_SYMBOL(dma_set_mask);
+
+struct dma_map_ops alpha_pci_ops = {
+	.alloc_coherent		= alpha_pci_alloc_coherent,
+	.free_coherent		= alpha_pci_free_coherent,
+	.map_page		= alpha_pci_map_page,
+	.unmap_page		= alpha_pci_unmap_page,
+	.map_sg			= alpha_pci_map_sg,
+	.unmap_sg		= alpha_pci_unmap_sg,
+	.mapping_error		= alpha_pci_mapping_error,
+	.dma_supported		= alpha_pci_supported,
+	.set_dma_mask		= alpha_pci_set_mask,
+};
+
+struct dma_map_ops *dma_ops = &alpha_pci_ops;
+EXPORT_SYMBOL(dma_ops);
diff --git a/arch/alpha/kernel/ptrace.c b/arch/alpha/kernel/ptrace.c
index e072041d19f8..9acadc6b16a0 100644
--- a/arch/alpha/kernel/ptrace.c
+++ b/arch/alpha/kernel/ptrace.c
@@ -249,6 +249,17 @@ ptrace_cancel_bpt(struct task_struct * child)
 	return (nsaved != 0);
 }
 
+void user_enable_single_step(struct task_struct *child)
+{
+	/* Mark single stepping.  */
+	task_thread_info(child)->bpt_nsaved = -1;
+}
+
+void user_disable_single_step(struct task_struct *child)
+{
+	ptrace_cancel_bpt(child);
+}
+
 /*
  * Called by kernel/ptrace.c when detaching..
  *
@@ -256,7 +267,7 @@ ptrace_cancel_bpt(struct task_struct * child)
  */
 void ptrace_disable(struct task_struct *child)
 { 
-	ptrace_cancel_bpt(child);
+	user_disable_single_step(child);
 }
 
 long arch_ptrace(struct task_struct *child, long request, long addr, long data)
@@ -295,52 +306,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		DBG(DBG_MEM, ("poke $%ld<-%#lx\n", addr, data));
 		ret = put_reg(child, addr, data);
 		break;
-
-	case PTRACE_SYSCALL:
-		/* continue and stop at next (return from) syscall */
-	case PTRACE_CONT:    /* restart after signal. */
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		if (request == PTRACE_SYSCALL)
-			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		else
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		child->exit_code = data;
-		/* make sure single-step breakpoint is gone. */
-		ptrace_cancel_bpt(child);
-		wake_up_process(child);
-		ret = 0;
-		break;
-
-	/*
-	 * Make the child exit.  Best I can do is send it a sigkill.
-	 * perhaps it should be put in the status that it wants to
-	 * exit.
-	 */
-	case PTRACE_KILL:
-		ret = 0;
-		if (child->exit_state == EXIT_ZOMBIE)
-			break;
-		child->exit_code = SIGKILL;
-		/* make sure single-step breakpoint is gone. */
-		ptrace_cancel_bpt(child);
-		wake_up_process(child);
-		break;
-
-	case PTRACE_SINGLESTEP:  /* execute single instruction. */
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		/* Mark single stepping.  */
-		task_thread_info(child)->bpt_nsaved = -1;
-		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		child->exit_code = data;
-		wake_up_process(child);
-		/* give it a chance to run. */
-		ret = 0;
-		break;
-
 	default:
 		ret = ptrace_request(child, request, addr, data);
 		break;
diff --git a/arch/alpha/kernel/sys_dp264.c b/arch/alpha/kernel/sys_dp264.c
index d64e1e497e76..4026502ab707 100644
--- a/arch/alpha/kernel/sys_dp264.c
+++ b/arch/alpha/kernel/sys_dp264.c
@@ -224,7 +224,7 @@ static void
 dp264_device_interrupt(unsigned long vector)
 {
 #if 1
-	printk("dp264_device_interrupt: NOT IMPLEMENTED YET!! \n");
+	printk("dp264_device_interrupt: NOT IMPLEMENTED YET!!\n");
 #else
 	unsigned long pld;
 	unsigned int i;
diff --git a/arch/alpha/kernel/sys_titan.c b/arch/alpha/kernel/sys_titan.c
index 288053342c83..9008d0f20c53 100644
--- a/arch/alpha/kernel/sys_titan.c
+++ b/arch/alpha/kernel/sys_titan.c
@@ -171,7 +171,7 @@ titan_set_irq_affinity(unsigned int irq, const struct cpumask *affinity)
 static void
 titan_device_interrupt(unsigned long vector)
 {
-	printk("titan_device_interrupt: NOT IMPLEMENTED YET!! \n");
+	printk("titan_device_interrupt: NOT IMPLEMENTED YET!!\n");
 }
 
 static void 
diff --git a/arch/alpha/kernel/traps.c b/arch/alpha/kernel/traps.c
index 6ee7655b7568..b14f015008ad 100644
--- a/arch/alpha/kernel/traps.c
+++ b/arch/alpha/kernel/traps.c
@@ -17,6 +17,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/kallsyms.h>
+#include <linux/ratelimit.h>
 
 #include <asm/gentrap.h>
 #include <asm/uaccess.h>
@@ -771,8 +772,7 @@ asmlinkage void
 do_entUnaUser(void __user * va, unsigned long opcode,
 	      unsigned long reg, struct pt_regs *regs)
 {
-	static int cnt = 0;
-	static unsigned long last_time;
+	static DEFINE_RATELIMIT_STATE(ratelimit, 5 * HZ, 5);
 
 	unsigned long tmp1, tmp2, tmp3, tmp4;
 	unsigned long fake_reg, *reg_addr = &fake_reg;
@@ -783,15 +783,11 @@ do_entUnaUser(void __user * va, unsigned long opcode,
 	   with the unaliged access.  */
 
 	if (!test_thread_flag (TIF_UAC_NOPRINT)) {
-		if (cnt >= 5 && time_after(jiffies, last_time + 5 * HZ)) {
-			cnt = 0;
-		}
-		if (++cnt < 5) {
+		if (__ratelimit(&ratelimit)) {
 			printk("%s(%d): unaligned trap at %016lx: %p %lx %ld\n",
 			       current->comm, task_pid_nr(current),
 			       regs->pc - 4, va, opcode, reg);
 		}
-		last_time = jiffies;
 	}
 	if (test_thread_flag (TIF_UAC_SIGBUS))
 		goto give_sigbus;
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 3b181284970f..c5408bf1bf43 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -155,6 +155,9 @@ config ARCH_MAY_HAVE_PC_FDC
 config ZONE_DMA
 	bool
 
+config NEED_DMA_MAP_STATE
+       def_bool y
+
 config GENERIC_ISA_DMA
 	bool
 
@@ -215,6 +218,10 @@ config MMU
 	  Select if you want MMU-based virtualised addressing space
 	  support by paged memory management. If unsure, say 'Y'.
 
+#
+# The "ARM system type" choice list is ordered alphabetically by option
+# text.  Please add new entries in the option alphabetic order.
+#
 choice
 	prompt "ARM system type"
 	default ARCH_VERSATILE
@@ -271,6 +278,18 @@ config ARCH_AT91
 	  This enables support for systems based on the Atmel AT91RM9200,
 	  AT91SAM9 and AT91CAP9 processors.
 
+config ARCH_BCMRING
+	bool "Broadcom BCMRING"
+	depends on MMU
+	select CPU_V6
+	select ARM_AMBA
+	select COMMON_CLKDEV
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select ARCH_WANT_OPTIONAL_GPIOLIB
+	help
+	  Support for Broadcom's BCMRing platform.
+
 config ARCH_CLPS711X
 	bool "Cirrus Logic CLPS711x/EP721x-based"
 	select CPU_ARM720T
@@ -321,10 +340,9 @@ config ARCH_MXC
 	bool "Freescale MXC/iMX-based"
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
-	select ARCH_MTD_XIP
-	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
 	select HAVE_CLK
+	select COMMON_CLKDEV
 	help
 	  Support for Freescale MXC/iMX-based family of processors
 
@@ -357,20 +375,6 @@ config ARCH_H720X
 	help
 	  This enables support for systems based on the Hynix HMS720x
 
-config ARCH_NOMADIK
-	bool "STMicroelectronics Nomadik"
-	select ARM_AMBA
-	select ARM_VIC
-	select CPU_ARM926T
-	select HAVE_CLK
-	select COMMON_CLKDEV
-	select GENERIC_TIME
-	select GENERIC_CLOCKEVENTS
-	select GENERIC_GPIO
-	select ARCH_REQUIRE_GPIOLIB
-	help
-	  Support for the Nomadik platform by ST-Ericsson
-
 config ARCH_IOP13XX
 	bool "IOP13xx-based"
 	depends on MMU
@@ -508,7 +512,7 @@ config ARCH_ORION5X
 	  Orion-2 (5281), Orion-1-90 (6183).
 
 config ARCH_MMP
-	bool "Marvell PXA168/910"
+	bool "Marvell PXA168/910/MMP2"
 	depends on MMU
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
@@ -519,7 +523,7 @@ config ARCH_MMP
 	select TICK_ONESHOT
 	select PLAT_PXA
 	help
-	  Support for Marvell's PXA168/910 processor line.
+	  Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
 
 config ARCH_KS8695
 	bool "Micrel/Kendin KS8695"
@@ -605,6 +609,11 @@ config ARCH_MSM
 	  interface to the ARM9 modem processor which runs the baseband stack
 	  and controls some vital subsystems (clock and power control, etc).
 
+config ARCH_SHMOBILE
+	bool "Renesas SH-Mobile"
+	help
+	  Support for Renesas's SH-Mobile ARM platforms
+
 config ARCH_RPC
 	bool "RiscPC"
 	select ARCH_ACORN
@@ -648,12 +657,43 @@ config ARCH_S3C2410
 
 config ARCH_S3C64XX
 	bool "Samsung S3C64XX"
+	select PLAT_SAMSUNG
+	select CPU_V6
 	select GENERIC_GPIO
+	select ARM_VIC
 	select HAVE_CLK
+	select NO_IOPORT
 	select ARCH_HAS_CPUFREQ
+	select ARCH_REQUIRE_GPIOLIB
+	select SAMSUNG_CLKSRC
+	select SAMSUNG_IRQ_VIC_TIMER
+	select SAMSUNG_IRQ_UART
+	select S3C_GPIO_TRACK
+	select S3C_GPIO_PULL_UPDOWN
+	select S3C_GPIO_CFG_S3C24XX
+	select S3C_GPIO_CFG_S3C64XX
+	select S3C_DEV_NAND
+	select USB_ARCH_HAS_OHCI
+	select SAMSUNG_GPIOLIB_4BIT
 	help
 	  Samsung S3C64XX series based systems
 
+config ARCH_S5P6440
+	bool "Samsung S5P6440"
+	select CPU_V6
+	select GENERIC_GPIO
+	select HAVE_CLK
+	help
+	  Samsung S5P6440 CPU based systems
+
+config ARCH_S5P6442
+	bool "Samsung S5P6442"
+	select CPU_V6
+	select GENERIC_GPIO
+	select HAVE_CLK
+	help
+	  Samsung S5P6442 CPU based systems
+
 config ARCH_S5PC1XX
 	bool "Samsung S5PC1XX"
 	select GENERIC_GPIO
@@ -663,6 +703,15 @@ config ARCH_S5PC1XX
 	help
 	  Samsung S5PC1XX series based systems
 
+config ARCH_S5PV210
+	bool "Samsung S5PV210/S5PC110"
+	select CPU_V7
+	select GENERIC_GPIO
+	select HAVE_CLK
+	select ARM_L1_CACHE_SHIFT_6
+	help
+	  Samsung S5PV210/S5PC110 series based systems
+
 config ARCH_SHARK
 	bool "Shark"
 	select CPU_SA110
@@ -700,6 +749,30 @@ config ARCH_U300
 	help
 	  Support for ST-Ericsson U300 series mobile platforms.
 
+config ARCH_U8500
+	bool "ST-Ericsson U8500 Series"
+	select CPU_V7
+	select ARM_AMBA
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select COMMON_CLKDEV
+	help
+	  Support for ST-Ericsson's Ux500 architecture
+
+config ARCH_NOMADIK
+	bool "STMicroelectronics Nomadik"
+	select ARM_AMBA
+	select ARM_VIC
+	select CPU_ARM926T
+	select HAVE_CLK
+	select COMMON_CLKDEV
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	help
+	  Support for the Nomadik platform by ST-Ericsson
+
 config ARCH_DAVINCI
 	bool "TI DaVinci"
 	select CPU_ARM926T
@@ -728,30 +801,13 @@ config ARCH_OMAP
 	help
 	  Support for TI's OMAP platform (OMAP1 and OMAP2).
 
-config ARCH_BCMRING
-	bool "Broadcom BCMRING"
-	depends on MMU
-	select CPU_V6
-	select ARM_AMBA
-	select COMMON_CLKDEV
-	select GENERIC_TIME
-	select GENERIC_CLOCKEVENTS
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	help
-	  Support for Broadcom's BCMRing platform.
-
-config ARCH_U8500
-	bool "ST-Ericsson U8500 Series"
-	select CPU_V7
-	select ARM_AMBA
-	select GENERIC_TIME
-	select GENERIC_CLOCKEVENTS
-	select COMMON_CLKDEV
-	help
-	  Support for ST-Ericsson's Ux500 architecture
-
 endchoice
 
+#
+# This is sorted alphabetically by mach-* pathname.  However, plat-*
+# Kconfigs may be included either alphabetically (according to the
+# plat- suffix) or along side the corresponding mach-* source.
+#
 source "arch/arm/mach-aaec2000/Kconfig"
 
 source "arch/arm/mach-at91/Kconfig"
@@ -828,8 +884,7 @@ source "arch/arm/mach-sa1100/Kconfig"
 
 source "arch/arm/plat-samsung/Kconfig"
 source "arch/arm/plat-s3c24xx/Kconfig"
-source "arch/arm/plat-s3c64xx/Kconfig"
-source "arch/arm/plat-s3c/Kconfig"
+source "arch/arm/plat-s5p/Kconfig"
 source "arch/arm/plat-s5pc1xx/Kconfig"
 
 if ARCH_S3C2410
@@ -837,21 +892,27 @@ source "arch/arm/mach-s3c2400/Kconfig"
 source "arch/arm/mach-s3c2410/Kconfig"
 source "arch/arm/mach-s3c2412/Kconfig"
 source "arch/arm/mach-s3c2440/Kconfig"
-source "arch/arm/mach-s3c2442/Kconfig"
 source "arch/arm/mach-s3c2443/Kconfig"
 endif
 
 if ARCH_S3C64XX
-source "arch/arm/mach-s3c6400/Kconfig"
-source "arch/arm/mach-s3c6410/Kconfig"
+source "arch/arm/mach-s3c64xx/Kconfig"
 endif
 
-source "arch/arm/plat-stmp3xxx/Kconfig"
+source "arch/arm/mach-s5p6440/Kconfig"
+
+source "arch/arm/mach-s5p6442/Kconfig"
 
 if ARCH_S5PC1XX
 source "arch/arm/mach-s5pc100/Kconfig"
 endif
 
+source "arch/arm/mach-s5pv210/Kconfig"
+
+source "arch/arm/mach-shmobile/Kconfig"
+
+source "arch/arm/plat-stmp3xxx/Kconfig"
+
 source "arch/arm/mach-u300/Kconfig"
 
 source "arch/arm/mach-ux500/Kconfig"
@@ -1117,7 +1178,7 @@ source kernel/Kconfig.preempt
 config HZ
 	int
 	default 128 if ARCH_L7200
-	default 200 if ARCH_EBSA110 || ARCH_S3C2410
+	default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PV210
 	default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
 	default AT91_TIMER_HZ if ARCH_AT91
 	default 100
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 5cb9326df7a7..91344af75f39 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -117,7 +117,7 @@ config DEBUG_CLPS711X_UART2
 	  cause the debug messages to appear on the first serial port.
 
 config DEBUG_S3C_UART
-	depends on PLAT_S3C
+	depends on PLAT_SAMSUNG
 	int "S3C UART to use for low-level debug"
 	default "0"
 	help
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 81f54ca30788..ed820e737a8a 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -146,6 +146,7 @@ machine-$(CONFIG_ARCH_MX1)		:= mx1
 machine-$(CONFIG_ARCH_MX2)		:= mx2
 machine-$(CONFIG_ARCH_MX25)		:= mx25
 machine-$(CONFIG_ARCH_MX3)		:= mx3
+machine-$(CONFIG_ARCH_MX5)		:= mx5
 machine-$(CONFIG_ARCH_MXC91231)		:= mxc91231
 machine-$(CONFIG_ARCH_NETX)		:= netx
 machine-$(CONFIG_ARCH_NOMADIK)		:= nomadik
@@ -159,12 +160,16 @@ machine-$(CONFIG_ARCH_PNX4008)		:= pnx4008
 machine-$(CONFIG_ARCH_PXA)		:= pxa
 machine-$(CONFIG_ARCH_REALVIEW)		:= realview
 machine-$(CONFIG_ARCH_RPC)		:= rpc
-machine-$(CONFIG_ARCH_S3C2410)		:= s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
+machine-$(CONFIG_ARCH_S3C2410)		:= s3c2410 s3c2400 s3c2412 s3c2440 s3c2443
 machine-$(CONFIG_ARCH_S3C24A0)		:= s3c24a0
-machine-$(CONFIG_ARCH_S3C64XX)		:= s3c6400 s3c6410
+machine-$(CONFIG_ARCH_S3C64XX)		:= s3c64xx
+machine-$(CONFIG_ARCH_S5P6440)		:= s5p6440
+machine-$(CONFIG_ARCH_S5P6442)		:= s5p6442
 machine-$(CONFIG_ARCH_S5PC1XX)		:= s5pc100
+machine-$(CONFIG_ARCH_S5PV210)		:= s5pv210
 machine-$(CONFIG_ARCH_SA1100)		:= sa1100
 machine-$(CONFIG_ARCH_SHARK)		:= shark
+machine-$(CONFIG_ARCH_SHMOBILE) 	:= shmobile
 machine-$(CONFIG_ARCH_STMP378X)		:= stmp378x
 machine-$(CONFIG_ARCH_STMP37XX)		:= stmp37xx
 machine-$(CONFIG_ARCH_U300)		:= u300
@@ -178,14 +183,15 @@ machine-$(CONFIG_FOOTBRIDGE)		:= footbridge
 # by CONFIG_* macro name.
 plat-$(CONFIG_ARCH_MXC)		:= mxc
 plat-$(CONFIG_ARCH_OMAP)	:= omap
+plat-$(CONFIG_ARCH_S3C64XX)	:= samsung
 plat-$(CONFIG_ARCH_STMP3XXX)	:= stmp3xxx
 plat-$(CONFIG_PLAT_IOP)		:= iop
 plat-$(CONFIG_PLAT_NOMADIK)	:= nomadik
 plat-$(CONFIG_PLAT_ORION)	:= orion
 plat-$(CONFIG_PLAT_PXA)		:= pxa
-plat-$(CONFIG_PLAT_S3C24XX)	:= s3c24xx s3c samsung
-plat-$(CONFIG_PLAT_S3C64XX)	:= s3c64xx s3c samsung
-plat-$(CONFIG_PLAT_S5PC1XX)	:= s5pc1xx s3c samsung
+plat-$(CONFIG_PLAT_S3C24XX)	:= s3c24xx samsung
+plat-$(CONFIG_PLAT_S5PC1XX)	:= s5pc1xx samsung
+plat-$(CONFIG_PLAT_S5P)		:= s5p samsung
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)
 # This is what happens if you forget the IOCS16 line.
diff --git a/arch/arm/boot/bootp/init.S b/arch/arm/boot/bootp/init.S
index df7bc7068d0f..8b0de41c3dcb 100644
--- a/arch/arm/boot/bootp/init.S
+++ b/arch/arm/boot/bootp/init.S
@@ -49,7 +49,7 @@ _start:		add	lr, pc, #-0x8		@ lr = current load addr
 /*
  * find the end of the tag list, and then add an INITRD tag on the end.
  * If there is already an INITRD tag, then we ignore it; the last INITRD
- * tag takes precidence.
+ * tag takes precedence.
  */
 taglist:	ldr	r10, [r9, #0]		@ tag length
 		teq	r10, #0			@ last tag (zero length)?
diff --git a/arch/arm/boot/compressed/decompress.c b/arch/arm/boot/compressed/decompress.c
index 0da382f33157..9c097073ce4c 100644
--- a/arch/arm/boot/compressed/decompress.c
+++ b/arch/arm/boot/compressed/decompress.c
@@ -11,6 +11,7 @@ extern unsigned long free_mem_end_ptr;
 extern void error(char *);
 
 #define STATIC static
+#define STATIC_RW_DATA	/* non-static please */
 
 #define ARCH_HAS_DECOMP_WDOG
 
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 99b75aa1c2ec..0f23009170a1 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -170,8 +170,8 @@ not_angel:
 
 		.text
 		adr	r0, LC0
- ARM(		ldmia	r0, {r1, r2, r3, r4, r5, r6, ip, sp}	)
- THUMB(		ldmia	r0, {r1, r2, r3, r4, r5, r6, ip}	)
+ ARM(		ldmia	r0, {r1, r2, r3, r4, r5, r6, r11, ip, sp})
+ THUMB(		ldmia	r0, {r1, r2, r3, r4, r5, r6, r11, ip}	)
  THUMB(		ldr	sp, [r0, #28]				)
 		subs	r0, r0, r1		@ calculate the delta offset
 
@@ -182,12 +182,13 @@ not_angel:
 		/*
 		 * We're running at a different address.  We need to fix
 		 * up various pointers:
-		 *   r5 - zImage base address
-		 *   r6 - GOT start
+		 *   r5 - zImage base address (_start)
+		 *   r6 - size of decompressed image
+		 *   r11 - GOT start
 		 *   ip - GOT end
 		 */
 		add	r5, r5, r0
-		add	r6, r6, r0
+		add	r11, r11, r0
 		add	ip, ip, r0
 
 #ifndef CONFIG_ZBOOT_ROM
@@ -205,10 +206,10 @@ not_angel:
 		/*
 		 * Relocate all entries in the GOT table.
 		 */
-1:		ldr	r1, [r6, #0]		@ relocate entries in the GOT
+1:		ldr	r1, [r11, #0]		@ relocate entries in the GOT
 		add	r1, r1, r0		@ table.  This fixes up the
-		str	r1, [r6], #4		@ C references.
-		cmp	r6, ip
+		str	r1, [r11], #4		@ C references.
+		cmp	r11, ip
 		blo	1b
 #else
 
@@ -216,12 +217,12 @@ not_angel:
 		 * Relocate entries in the GOT table.  We only relocate
 		 * the entries that are outside the (relocated) BSS region.
 		 */
-1:		ldr	r1, [r6, #0]		@ relocate entries in the GOT
+1:		ldr	r1, [r11, #0]		@ relocate entries in the GOT
 		cmp	r1, r2			@ entry < bss_start ||
 		cmphs	r3, r1			@ _end < entry
 		addlo	r1, r1, r0		@ table.  This fixes up the
-		str	r1, [r6], #4		@ C references.
-		cmp	r6, ip
+		str	r1, [r11], #4		@ C references.
+		cmp	r11, ip
 		blo	1b
 #endif
 
@@ -247,6 +248,7 @@ not_relocated:	mov	r0, #0
  * Check to see if we will overwrite ourselves.
  *   r4 = final kernel address
  *   r5 = start of this image
+ *   r6 = size of decompressed image
  *   r2 = end of malloc space (and therefore this image)
  * We basically want:
  *   r4 >= r2 -> OK
@@ -254,8 +256,7 @@ not_relocated:	mov	r0, #0
  */
 		cmp	r4, r2
 		bhs	wont_overwrite
-		sub	r3, sp, r5		@ > compressed kernel size
-		add	r0, r4, r3, lsl #2	@ allow for 4x expansion
+		add	r0, r4, r6
 		cmp	r0, r5
 		bls	wont_overwrite
 
@@ -271,7 +272,6 @@ not_relocated:	mov	r0, #0
  * r1-r3  = unused
  * r4     = kernel execution address
  * r5     = decompressed kernel start
- * r6     = processor ID
  * r7     = architecture ID
  * r8     = atags pointer
  * r9-r12,r14 = corrupted
@@ -312,7 +312,8 @@ LC0:		.word	LC0			@ r1
 		.word	_end			@ r3
 		.word	zreladdr		@ r4
 		.word	_start			@ r5
-		.word	_got_start		@ r6
+		.word	_image_size		@ r6
+		.word	_got_start		@ r11
 		.word	_got_end		@ ip
 		.word	user_stack+4096		@ sp
 LC1:		.word	reloc_end - reloc_start
@@ -336,7 +337,6 @@ params:		ldr	r0, =params_phys
  *
  * On entry,
  *  r4 = kernel execution address
- *  r6 = processor ID
  *  r7 = architecture number
  *  r8 = atags pointer
  *  r9 = run-time address of "start"  (???)
@@ -542,7 +542,6 @@ __common_mmu_cache_on:
  * r1-r3  = unused
  * r4     = kernel execution address
  * r5     = decompressed kernel start
- * r6     = processor ID
  * r7     = architecture ID
  * r8     = atags pointer
  * r9-r12,r14 = corrupted
@@ -581,19 +580,19 @@ call_kernel:	bl	cache_clean_flush
  *  r1  = corrupted
  *  r2  = corrupted
  *  r3  = block offset
- *  r6  = corrupted
+ *  r9  = corrupted
  *  r12 = corrupted
  */
 
 call_cache_fn:	adr	r12, proc_types
 #ifdef CONFIG_CPU_CP15
-		mrc	p15, 0, r6, c0, c0	@ get processor ID
+		mrc	p15, 0, r9, c0, c0	@ get processor ID
 #else
-		ldr	r6, =CONFIG_PROCESSOR_ID
+		ldr	r9, =CONFIG_PROCESSOR_ID
 #endif
 1:		ldr	r1, [r12, #0]		@ get value
 		ldr	r2, [r12, #4]		@ get mask
-		eor	r1, r1, r6		@ (real ^ match)
+		eor	r1, r1, r9		@ (real ^ match)
 		tst	r1, r2			@       & mask
  ARM(		addeq	pc, r12, r3		) @ call cache function
  THUMB(		addeq	r12, r3			)
@@ -743,7 +742,7 @@ proc_types:
 		.word	0x000f0000
 		W(b)	__armv4_mmu_cache_on
 		W(b)	__armv4_mmu_cache_off
-		W(b)	__armv4_mmu_cache_flush
+		W(b)	__armv5tej_mmu_cache_flush
 
 		.word	0x0007b000		@ ARMv6
 		.word	0x000ff000
@@ -778,8 +777,7 @@ proc_types:
  * Turn off the Cache and MMU.  ARMv3 does not support
  * reading the control register, but ARMv4 does.
  *
- * On entry,  r6 = processor ID
- * On exit,   r0, r1, r2, r3, r12 corrupted
+ * On exit, r0, r1, r2, r3, r9, r12 corrupted
  * This routine must preserve: r4, r6, r7
  */
 		.align	5
@@ -852,10 +850,8 @@ __armv3_mmu_cache_off:
 /*
  * Clean and flush the cache to maintain consistency.
  *
- * On entry,
- *  r6 = processor ID
  * On exit,
- *  r1, r2, r3, r11, r12 corrupted
+ *  r1, r2, r3, r9, r11, r12 corrupted
  * This routine must preserve:
  *  r0, r4, r5, r6, r7
  */
@@ -967,7 +963,7 @@ __armv4_mmu_cache_flush:
 		mov	r2, #64*1024		@ default: 32K dcache size (*2)
 		mov	r11, #32		@ default: 32 byte line size
 		mrc	p15, 0, r3, c0, c0, 1	@ read cache type
-		teq	r3, r6			@ cache ID register present?
+		teq	r3, r9			@ cache ID register present?
 		beq	no_cache_id
 		mov	r1, r3, lsr #18
 		and	r1, r1, #7
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index d32bc71c1f78..d2b2ef41cd4f 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -33,6 +33,7 @@ unsigned int __machine_arch_type;
 #else
 
 static void putstr(const char *ptr);
+extern void error(char *x);
 
 #include <mach/uncompress.h>
 
diff --git a/arch/arm/boot/compressed/vmlinux.lds.in b/arch/arm/boot/compressed/vmlinux.lds.in
index 7ca9ecff652f..d08168941bd6 100644
--- a/arch/arm/boot/compressed/vmlinux.lds.in
+++ b/arch/arm/boot/compressed/vmlinux.lds.in
@@ -43,6 +43,9 @@ SECTIONS
 
   _etext = .;
 
+  /* Assume size of decompressed image is 4x the compressed image */
+  _image_size = (_etext - _text) * 4;
+
   _got_start = .;
   .got			: { *(.got) }
   _got_end = .;
diff --git a/arch/arm/common/clkdev.c b/arch/arm/common/clkdev.c
index 446b696196e3..6416d5b5020d 100644
--- a/arch/arm/common/clkdev.c
+++ b/arch/arm/common/clkdev.c
@@ -32,7 +32,7 @@ static DEFINE_MUTEX(clocks_mutex);
  *  If an entry has a device ID, it must match
  *  If an entry has a connection ID, it must match
  * Then we take the most specific entry - with the following
- * order of precidence: dev+con > dev only > con only.
+ * order of precedence: dev+con > dev only > con only.
  */
 static struct clk *clk_find(const char *dev_id, const char *con_id)
 {
diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c
index 2793447621c3..ee1d3b85eb65 100644
--- a/arch/arm/common/it8152.c
+++ b/arch/arm/common/it8152.c
@@ -272,33 +272,6 @@ int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
 		((dma_addr + size - PHYS_OFFSET) >= SZ_64M);
 }
 
-/*
- * We override these so we properly do dmabounce otherwise drivers
- * are able to set the dma_mask to 0xffffffff and we can no longer
- * trap bounces. :(
- *
- * We just return true on everyhing except for < 64MB in which case
- * we will fail miseralby and die since we can't handle that case.
- */
-int pci_set_dma_mask(struct pci_dev *dev, u64 mask)
-{
-	dev_dbg(&dev->dev, "%s: %llx\n", __func__, mask);
-	if (mask >= PHYS_OFFSET + SZ_64M - 1)
-		return 0;
-
-	return -EIO;
-}
-
-int
-pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
-{
-	dev_dbg(&dev->dev, "%s: %llx\n", __func__, mask);
-	if (mask >= PHYS_OFFSET + SZ_64M - 1)
-		return 0;
-
-	return -EIO;
-}
-
 int __init it8152_pci_setup(int nr, struct pci_sys_data *sys)
 {
 	it8152_io.start = IT8152_IO_BASE + 0x12000;
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index bd36c778c819..90ae00b631c2 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -32,6 +32,12 @@
 
 #include <asm/hardware/locomo.h>
 
+/* LoCoMo Interrupts */
+#define IRQ_LOCOMO_KEY		(0)
+#define IRQ_LOCOMO_GPIO		(1)
+#define IRQ_LOCOMO_LT		(2)
+#define IRQ_LOCOMO_SPI		(3)
+
 /* M62332 output channel selection */
 #define M62332_EVR_CH	1	/* M62332 volume channel number  */
 				/*   0 : CH.1 , 1 : CH. 2        */
@@ -58,6 +64,7 @@ struct locomo {
 	struct device *dev;
 	unsigned long phys;
 	unsigned int irq;
+	int irq_base;
 	spinlock_t lock;
 	void __iomem *base;
 #ifdef CONFIG_PM
@@ -81,9 +88,7 @@ struct locomo_dev_info {
 static struct locomo_dev_info locomo_devices[] = {
 	{
 		.devid 		= LOCOMO_DEVID_KEYBOARD,
-		.irq = {
-			IRQ_LOCOMO_KEY,
-		},
+		.irq		= { IRQ_LOCOMO_KEY },
 		.name		= "locomo-keyboard",
 		.offset		= LOCOMO_KEYBOARD,
 		.length		= 16,
@@ -133,53 +138,20 @@ static struct locomo_dev_info locomo_devices[] = {
 	},
 };
 
-
-/** LoCoMo interrupt handling stuff.
- * NOTE: LoCoMo has a 1 to many mapping on all of its IRQs.
- * that is, there is only one real hardware interrupt
- * we determine which interrupt it is by reading some IO memory.
- * We have two levels of expansion, first in the handler for the
- * hardware interrupt we generate an interrupt
- * IRQ_LOCOMO_*_BASE and those handlers generate more interrupts
- *
- * hardware irq reads LOCOMO_ICR & 0x0f00
- *   IRQ_LOCOMO_KEY_BASE
- *   IRQ_LOCOMO_GPIO_BASE
- *   IRQ_LOCOMO_LT_BASE
- *   IRQ_LOCOMO_SPI_BASE
- * IRQ_LOCOMO_KEY_BASE reads LOCOMO_KIC & 0x0001
- *   IRQ_LOCOMO_KEY
- * IRQ_LOCOMO_GPIO_BASE reads LOCOMO_GIR & LOCOMO_GPD & 0xffff
- *   IRQ_LOCOMO_GPIO[0-15]
- * IRQ_LOCOMO_LT_BASE reads LOCOMO_LTINT & 0x0001
- *   IRQ_LOCOMO_LT
- * IRQ_LOCOMO_SPI_BASE reads LOCOMO_SPIIR & 0x000F
- *   IRQ_LOCOMO_SPI_RFR
- *   IRQ_LOCOMO_SPI_RFW
- *   IRQ_LOCOMO_SPI_OVRN
- *   IRQ_LOCOMO_SPI_TEND
- */
-
-#define LOCOMO_IRQ_START	(IRQ_LOCOMO_KEY_BASE)
-#define LOCOMO_IRQ_KEY_START	(IRQ_LOCOMO_KEY)
-#define	LOCOMO_IRQ_GPIO_START	(IRQ_LOCOMO_GPIO0)
-#define	LOCOMO_IRQ_LT_START	(IRQ_LOCOMO_LT)
-#define	LOCOMO_IRQ_SPI_START	(IRQ_LOCOMO_SPI_RFR)
-
 static void locomo_handler(unsigned int irq, struct irq_desc *desc)
 {
+	struct locomo *lchip = get_irq_chip_data(irq);
 	int req, i;
-	void __iomem *mapbase = get_irq_chip_data(irq);
 
 	/* Acknowledge the parent IRQ */
 	desc->chip->ack(irq);
 
 	/* check why this interrupt was generated */
-	req = locomo_readl(mapbase + LOCOMO_ICR) & 0x0f00;
+	req = locomo_readl(lchip->base + LOCOMO_ICR) & 0x0f00;
 
 	if (req) {
 		/* generate the next interrupt(s) */
-		irq = LOCOMO_IRQ_START;
+		irq = lchip->irq_base;
 		for (i = 0; i <= 3; i++, irq++) {
 			if (req & (0x0100 << i)) {
 				generic_handle_irq(irq);
@@ -195,20 +167,20 @@ static void locomo_ack_irq(unsigned int irq)
 
 static void locomo_mask_irq(unsigned int irq)
 {
-	void __iomem *mapbase = get_irq_chip_data(irq);
+	struct locomo *lchip = get_irq_chip_data(irq);
 	unsigned int r;
-	r = locomo_readl(mapbase + LOCOMO_ICR);
-	r &= ~(0x0010 << (irq - LOCOMO_IRQ_START));
-	locomo_writel(r, mapbase + LOCOMO_ICR);
+	r = locomo_readl(lchip->base + LOCOMO_ICR);
+	r &= ~(0x0010 << (irq - lchip->irq_base));
+	locomo_writel(r, lchip->base + LOCOMO_ICR);
 }
 
 static void locomo_unmask_irq(unsigned int irq)
 {
-	void __iomem *mapbase = get_irq_chip_data(irq);
+	struct locomo *lchip = get_irq_chip_data(irq);
 	unsigned int r;
-	r = locomo_readl(mapbase + LOCOMO_ICR);
-	r |= (0x0010 << (irq - LOCOMO_IRQ_START));
-	locomo_writel(r, mapbase + LOCOMO_ICR);
+	r = locomo_readl(lchip->base + LOCOMO_ICR);
+	r |= (0x0010 << (irq - lchip->irq_base));
+	locomo_writel(r, lchip->base + LOCOMO_ICR);
 }
 
 static struct irq_chip locomo_chip = {
@@ -218,297 +190,22 @@ static struct irq_chip locomo_chip = {
 	.unmask	= locomo_unmask_irq,
 };
 
-static void locomo_key_handler(unsigned int irq, struct irq_desc *desc)
-{
-	void __iomem *mapbase = get_irq_chip_data(irq);
-
-	if (locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC) & 0x0001) {
-		generic_handle_irq(LOCOMO_IRQ_KEY_START);
-	}
-}
-
-static void locomo_key_ack_irq(unsigned int irq)
-{
-	void __iomem *mapbase = get_irq_chip_data(irq);
-	unsigned int r;
-	r = locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC);
-	r &= ~(0x0100 << (irq - LOCOMO_IRQ_KEY_START));
-	locomo_writel(r, mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC);
-}
-
-static void locomo_key_mask_irq(unsigned int irq)
-{
-	void __iomem *mapbase = get_irq_chip_data(irq);
-	unsigned int r;
-	r = locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC);
-	r &= ~(0x0010 << (irq - LOCOMO_IRQ_KEY_START));
-	locomo_writel(r, mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC);
-}
-
-static void locomo_key_unmask_irq(unsigned int irq)
-{
-	void __iomem *mapbase = get_irq_chip_data(irq);
-	unsigned int r;
-	r = locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC);
-	r |= (0x0010 << (irq - LOCOMO_IRQ_KEY_START));
-	locomo_writel(r, mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC);
-}
-
-static struct irq_chip locomo_key_chip = {
-	.name	= "LOCOMO-key",
-	.ack	= locomo_key_ack_irq,
-	.mask	= locomo_key_mask_irq,
-	.unmask	= locomo_key_unmask_irq,
-};
-
-static void locomo_gpio_handler(unsigned int irq, struct irq_desc *desc)
-{
-	int req, i;
-	void __iomem *mapbase = get_irq_chip_data(irq);
-
-	req = 	locomo_readl(mapbase + LOCOMO_GIR) &
-		locomo_readl(mapbase + LOCOMO_GPD) &
-		0xffff;
-
-	if (req) {
-		irq = LOCOMO_IRQ_GPIO_START;
-		for (i = 0; i <= 15; i++, irq++) {
-			if (req & (0x0001 << i)) {
-				generic_handle_irq(irq);
-			}
-		}
-	}
-}
-
-static void locomo_gpio_ack_irq(unsigned int irq)
-{
-	void __iomem *mapbase = get_irq_chip_data(irq);
-	unsigned int r;
-	r = locomo_readl(mapbase + LOCOMO_GWE);
-	r |= (0x0001 << (irq - LOCOMO_IRQ_GPIO_START));
-	locomo_writel(r, mapbase + LOCOMO_GWE);
-
-	r = locomo_readl(mapbase + LOCOMO_GIS);
-	r &= ~(0x0001 << (irq - LOCOMO_IRQ_GPIO_START));
-	locomo_writel(r, mapbase + LOCOMO_GIS);
-
-	r = locomo_readl(mapbase + LOCOMO_GWE);
-	r &= ~(0x0001 << (irq - LOCOMO_IRQ_GPIO_START));
-	locomo_writel(r, mapbase + LOCOMO_GWE);
-}
-
-static void locomo_gpio_mask_irq(unsigned int irq)
-{
-	void __iomem *mapbase = get_irq_chip_data(irq);
-	unsigned int r;
-	r = locomo_readl(mapbase + LOCOMO_GIE);
-	r &= ~(0x0001 << (irq - LOCOMO_IRQ_GPIO_START));
-	locomo_writel(r, mapbase + LOCOMO_GIE);
-}
-
-static void locomo_gpio_unmask_irq(unsigned int irq)
-{
-	void __iomem *mapbase = get_irq_chip_data(irq);
-	unsigned int r;
-	r = locomo_readl(mapbase + LOCOMO_GIE);
-	r |= (0x0001 << (irq - LOCOMO_IRQ_GPIO_START));
-	locomo_writel(r, mapbase + LOCOMO_GIE);
-}
-
-static int GPIO_IRQ_rising_edge;
-static int GPIO_IRQ_falling_edge;
-
-static int locomo_gpio_type(unsigned int irq, unsigned int type)
-{
-	unsigned int mask;
-	void __iomem *mapbase = get_irq_chip_data(irq);
-
-	mask = 1 << (irq - LOCOMO_IRQ_GPIO_START);
-
-	if (type == IRQ_TYPE_PROBE) {
-		if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask)
-			return 0;
-		type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
-	}
-
-	if (type & IRQ_TYPE_EDGE_RISING)
-		GPIO_IRQ_rising_edge |= mask;
-	else
-		GPIO_IRQ_rising_edge &= ~mask;
-	if (type & IRQ_TYPE_EDGE_FALLING)
-		GPIO_IRQ_falling_edge |= mask;
-	else
-		GPIO_IRQ_falling_edge &= ~mask;
-	locomo_writel(GPIO_IRQ_rising_edge, mapbase + LOCOMO_GRIE);
-	locomo_writel(GPIO_IRQ_falling_edge, mapbase + LOCOMO_GFIE);
-
-	return 0;
-}
-
-static struct irq_chip locomo_gpio_chip = {
-	.name	  = "LOCOMO-gpio",
-	.ack	  = locomo_gpio_ack_irq,
-	.mask	  = locomo_gpio_mask_irq,
-	.unmask	  = locomo_gpio_unmask_irq,
-	.set_type = locomo_gpio_type,
-};
-
-static void locomo_lt_handler(unsigned int irq, struct irq_desc *desc)
-{
-	void __iomem *mapbase = get_irq_chip_data(irq);
-
-	if (locomo_readl(mapbase + LOCOMO_LTINT) & 0x0001) {
-		generic_handle_irq(LOCOMO_IRQ_LT_START);
-	}
-}
-
-static void locomo_lt_ack_irq(unsigned int irq)
-{
-	void __iomem *mapbase = get_irq_chip_data(irq);
-	unsigned int r;
-	r = locomo_readl(mapbase + LOCOMO_LTINT);
-	r &= ~(0x0100 << (irq - LOCOMO_IRQ_LT_START));
-	locomo_writel(r, mapbase + LOCOMO_LTINT);
-}
-
-static void locomo_lt_mask_irq(unsigned int irq)
-{
-	void __iomem *mapbase = get_irq_chip_data(irq);
-	unsigned int r;
-	r = locomo_readl(mapbase + LOCOMO_LTINT);
-	r &= ~(0x0010 << (irq - LOCOMO_IRQ_LT_START));
-	locomo_writel(r, mapbase + LOCOMO_LTINT);
-}
-
-static void locomo_lt_unmask_irq(unsigned int irq)
-{
-	void __iomem *mapbase = get_irq_chip_data(irq);
-	unsigned int r;
-	r = locomo_readl(mapbase + LOCOMO_LTINT);
-	r |= (0x0010 << (irq - LOCOMO_IRQ_LT_START));
-	locomo_writel(r, mapbase + LOCOMO_LTINT);
-}
-
-static struct irq_chip locomo_lt_chip = {
-	.name	= "LOCOMO-lt",
-	.ack	= locomo_lt_ack_irq,
-	.mask	= locomo_lt_mask_irq,
-	.unmask	= locomo_lt_unmask_irq,
-};
-
-static void locomo_spi_handler(unsigned int irq, struct irq_desc *desc)
-{
-	int req, i;
-	void __iomem *mapbase = get_irq_chip_data(irq);
-
-	req = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIR) & 0x000F;
-	if (req) {
-		irq = LOCOMO_IRQ_SPI_START;
-
-		for (i = 0; i <= 3; i++, irq++) {
-			if (req & (0x0001 << i)) {
-				generic_handle_irq(irq);
-			}
-		}
-	}
-}
-
-static void locomo_spi_ack_irq(unsigned int irq)
-{
-	void __iomem *mapbase = get_irq_chip_data(irq);
-	unsigned int r;
-	r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIWE);
-	r |= (0x0001 << (irq - LOCOMO_IRQ_SPI_START));
-	locomo_writel(r, mapbase + LOCOMO_SPI + LOCOMO_SPIWE);
-
-	r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIS);
-	r &= ~(0x0001 << (irq - LOCOMO_IRQ_SPI_START));
-	locomo_writel(r, mapbase + LOCOMO_SPI + LOCOMO_SPIIS);
-
-	r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIWE);
-	r &= ~(0x0001 << (irq - LOCOMO_IRQ_SPI_START));
-	locomo_writel(r, mapbase + LOCOMO_SPI + LOCOMO_SPIWE);
-}
-
-static void locomo_spi_mask_irq(unsigned int irq)
-{
-	void __iomem *mapbase = get_irq_chip_data(irq);
-	unsigned int r;
-	r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIE);
-	r &= ~(0x0001 << (irq - LOCOMO_IRQ_SPI_START));
-	locomo_writel(r, mapbase + LOCOMO_SPI + LOCOMO_SPIIE);
-}
-
-static void locomo_spi_unmask_irq(unsigned int irq)
-{
-	void __iomem *mapbase = get_irq_chip_data(irq);
-	unsigned int r;
-	r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIE);
-	r |= (0x0001 << (irq - LOCOMO_IRQ_SPI_START));
-	locomo_writel(r, mapbase + LOCOMO_SPI + LOCOMO_SPIIE);
-}
-
-static struct irq_chip locomo_spi_chip = {
-	.name	= "LOCOMO-spi",
-	.ack	= locomo_spi_ack_irq,
-	.mask	= locomo_spi_mask_irq,
-	.unmask	= locomo_spi_unmask_irq,
-};
-
 static void locomo_setup_irq(struct locomo *lchip)
 {
-	int irq;
-	void __iomem *irqbase = lchip->base;
+	int irq = lchip->irq_base;
 
 	/*
 	 * Install handler for IRQ_LOCOMO_HW.
 	 */
 	set_irq_type(lchip->irq, IRQ_TYPE_EDGE_FALLING);
-	set_irq_chip_data(lchip->irq, irqbase);
+	set_irq_chip_data(lchip->irq, lchip);
 	set_irq_chained_handler(lchip->irq, locomo_handler);
 
-	/* Install handlers for IRQ_LOCOMO_*_BASE */
-	set_irq_chip(IRQ_LOCOMO_KEY_BASE, &locomo_chip);
-	set_irq_chip_data(IRQ_LOCOMO_KEY_BASE, irqbase);
-	set_irq_chained_handler(IRQ_LOCOMO_KEY_BASE, locomo_key_handler);
-
-	set_irq_chip(IRQ_LOCOMO_GPIO_BASE, &locomo_chip);
-	set_irq_chip_data(IRQ_LOCOMO_GPIO_BASE, irqbase);
-	set_irq_chained_handler(IRQ_LOCOMO_GPIO_BASE, locomo_gpio_handler);
-
-	set_irq_chip(IRQ_LOCOMO_LT_BASE, &locomo_chip);
-	set_irq_chip_data(IRQ_LOCOMO_LT_BASE, irqbase);
-	set_irq_chained_handler(IRQ_LOCOMO_LT_BASE, locomo_lt_handler);
-
-	set_irq_chip(IRQ_LOCOMO_SPI_BASE, &locomo_chip);
-	set_irq_chip_data(IRQ_LOCOMO_SPI_BASE, irqbase);
-	set_irq_chained_handler(IRQ_LOCOMO_SPI_BASE, locomo_spi_handler);
-
-	/* install handlers for IRQ_LOCOMO_KEY_BASE generated interrupts */
-	set_irq_chip(LOCOMO_IRQ_KEY_START, &locomo_key_chip);
-	set_irq_chip_data(LOCOMO_IRQ_KEY_START, irqbase);
-	set_irq_handler(LOCOMO_IRQ_KEY_START, handle_edge_irq);
-	set_irq_flags(LOCOMO_IRQ_KEY_START, IRQF_VALID | IRQF_PROBE);
-
-	/* install handlers for IRQ_LOCOMO_GPIO_BASE generated interrupts */
-	for (irq = LOCOMO_IRQ_GPIO_START; irq < LOCOMO_IRQ_GPIO_START + 16; irq++) {
-		set_irq_chip(irq, &locomo_gpio_chip);
-		set_irq_chip_data(irq, irqbase);
-		set_irq_handler(irq, handle_edge_irq);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-	}
-
-	/* install handlers for IRQ_LOCOMO_LT_BASE generated interrupts */
-	set_irq_chip(LOCOMO_IRQ_LT_START, &locomo_lt_chip);
-	set_irq_chip_data(LOCOMO_IRQ_LT_START, irqbase);
-	set_irq_handler(LOCOMO_IRQ_LT_START, handle_edge_irq);
-	set_irq_flags(LOCOMO_IRQ_LT_START, IRQF_VALID | IRQF_PROBE);
-
-	/* install handlers for IRQ_LOCOMO_SPI_BASE generated interrupts */
-	for (irq = LOCOMO_IRQ_SPI_START; irq < LOCOMO_IRQ_SPI_START + 4; irq++) {
-		set_irq_chip(irq, &locomo_spi_chip);
-		set_irq_chip_data(irq, irqbase);
-		set_irq_handler(irq, handle_edge_irq);
+	/* Install handlers for IRQ_LOCOMO_* */
+	for ( ; irq <= lchip->irq_base + 3; irq++) {
+		set_irq_chip(irq, &locomo_chip);
+		set_irq_chip_data(irq, lchip);
+		set_irq_handler(irq, handle_level_irq);
 		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 	}
 }
@@ -555,7 +252,8 @@ locomo_init_one_child(struct locomo *lchip, struct locomo_dev_info *info)
 		dev->mapbase = 0;
 	dev->length = info->length;
 
-	memmove(dev->irq, info->irq, sizeof(dev->irq));
+	dev->irq[0] = (lchip->irq_base == NO_IRQ) ?
+			NO_IRQ : lchip->irq_base + info->irq[0];
 
 	ret = device_register(&dev->dev);
 	if (ret) {
@@ -672,6 +370,7 @@ static int locomo_resume(struct platform_device *dev)
 static int
 __locomo_probe(struct device *me, struct resource *mem, int irq)
 {
+	struct locomo_platform_data *pdata = me->platform_data;
 	struct locomo *lchip;
 	unsigned long r;
 	int i, ret = -ENODEV;
@@ -687,6 +386,7 @@ __locomo_probe(struct device *me, struct resource *mem, int irq)
 
 	lchip->phys = mem->start;
 	lchip->irq = irq;
+	lchip->irq_base = (pdata) ? pdata->irq_base : NO_IRQ;
 
 	/*
 	 * Map the whole region.  This also maps the
@@ -753,7 +453,7 @@ __locomo_probe(struct device *me, struct resource *mem, int irq)
 	 * The interrupt controller must be initialised before any
 	 * other device to ensure that the interrupts are available.
 	 */
-	if (lchip->irq != NO_IRQ)
+	if (lchip->irq != NO_IRQ && lchip->irq_base != NO_IRQ)
 		locomo_setup_irq(lchip);
 
 	for (i = 0; i < ARRAY_SIZE(locomo_devices); i++)
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index 8ba7044c554d..a52a27c1d9be 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -35,6 +35,58 @@
 
 #include <asm/hardware/sa1111.h>
 
+/* SA1111 IRQs */
+#define IRQ_GPAIN0		(0)
+#define IRQ_GPAIN1		(1)
+#define IRQ_GPAIN2		(2)
+#define IRQ_GPAIN3		(3)
+#define IRQ_GPBIN0		(4)
+#define IRQ_GPBIN1		(5)
+#define IRQ_GPBIN2		(6)
+#define IRQ_GPBIN3		(7)
+#define IRQ_GPBIN4		(8)
+#define IRQ_GPBIN5		(9)
+#define IRQ_GPCIN0		(10)
+#define IRQ_GPCIN1		(11)
+#define IRQ_GPCIN2		(12)
+#define IRQ_GPCIN3		(13)
+#define IRQ_GPCIN4		(14)
+#define IRQ_GPCIN5		(15)
+#define IRQ_GPCIN6		(16)
+#define IRQ_GPCIN7		(17)
+#define IRQ_MSTXINT		(18)
+#define IRQ_MSRXINT		(19)
+#define IRQ_MSSTOPERRINT	(20)
+#define IRQ_TPTXINT		(21)
+#define IRQ_TPRXINT		(22)
+#define IRQ_TPSTOPERRINT	(23)
+#define SSPXMTINT		(24)
+#define SSPRCVINT		(25)
+#define SSPROR			(26)
+#define AUDXMTDMADONEA		(32)
+#define AUDRCVDMADONEA		(33)
+#define AUDXMTDMADONEB		(34)
+#define AUDRCVDMADONEB		(35)
+#define AUDTFSR			(36)
+#define AUDRFSR			(37)
+#define AUDTUR			(38)
+#define AUDROR			(39)
+#define AUDDTS			(40)
+#define AUDRDD			(41)
+#define AUDSTO			(42)
+#define IRQ_USBPWR		(43)
+#define IRQ_HCIM		(44)
+#define IRQ_HCIBUFFACC		(45)
+#define IRQ_HCIRMTWKP		(46)
+#define IRQ_NHCIMFCIR		(47)
+#define IRQ_USB_PORT_RESUME	(48)
+#define IRQ_S0_READY_NINT	(49)
+#define IRQ_S1_READY_NINT	(50)
+#define IRQ_S0_CD_VALID		(51)
+#define IRQ_S1_CD_VALID		(52)
+#define IRQ_S0_BVD1_STSCHG	(53)
+#define IRQ_S1_BVD1_STSCHG	(54)
+
 extern void __init sa1110_mb_enable(void);
 
 /*
@@ -49,6 +101,7 @@ struct sa1111 {
 	struct clk	*clk;
 	unsigned long	phys;
 	int		irq;
+	int		irq_base;	/* base for cascaded on-chip IRQs */
 	spinlock_t	lock;
 	void __iomem	*base;
 #ifdef CONFIG_PM
@@ -152,36 +205,37 @@ static void
 sa1111_irq_handler(unsigned int irq, struct irq_desc *desc)
 {
 	unsigned int stat0, stat1, i;
-	void __iomem *base = get_irq_data(irq);
+	struct sa1111 *sachip = get_irq_data(irq);
+	void __iomem *mapbase = sachip->base + SA1111_INTC;
 
-	stat0 = sa1111_readl(base + SA1111_INTSTATCLR0);
-	stat1 = sa1111_readl(base + SA1111_INTSTATCLR1);
+	stat0 = sa1111_readl(mapbase + SA1111_INTSTATCLR0);
+	stat1 = sa1111_readl(mapbase + SA1111_INTSTATCLR1);
 
-	sa1111_writel(stat0, base + SA1111_INTSTATCLR0);
+	sa1111_writel(stat0, mapbase + SA1111_INTSTATCLR0);
 
 	desc->chip->ack(irq);
 
-	sa1111_writel(stat1, base + SA1111_INTSTATCLR1);
+	sa1111_writel(stat1, mapbase + SA1111_INTSTATCLR1);
 
 	if (stat0 == 0 && stat1 == 0) {
 		do_bad_IRQ(irq, desc);
 		return;
 	}
 
-	for (i = IRQ_SA1111_START; stat0; i++, stat0 >>= 1)
+	for (i = 0; stat0; i++, stat0 >>= 1)
 		if (stat0 & 1)
-			handle_edge_irq(i, irq_desc + i);
+			generic_handle_irq(i + sachip->irq_base);
 
-	for (i = IRQ_SA1111_START + 32; stat1; i++, stat1 >>= 1)
+	for (i = 32; stat1; i++, stat1 >>= 1)
 		if (stat1 & 1)
-			handle_edge_irq(i, irq_desc + i);
+			generic_handle_irq(i + sachip->irq_base);
 
 	/* For level-based interrupts */
 	desc->chip->unmask(irq);
 }
 
-#define SA1111_IRQMASK_LO(x)	(1 << (x - IRQ_SA1111_START))
-#define SA1111_IRQMASK_HI(x)	(1 << (x - IRQ_SA1111_START - 32))
+#define SA1111_IRQMASK_LO(x)	(1 << (x - sachip->irq_base))
+#define SA1111_IRQMASK_HI(x)	(1 << (x - sachip->irq_base - 32))
 
 static void sa1111_ack_irq(unsigned int irq)
 {
@@ -189,7 +243,8 @@ static void sa1111_ack_irq(unsigned int irq)
 
 static void sa1111_mask_lowirq(unsigned int irq)
 {
-	void __iomem *mapbase = get_irq_chip_data(irq);
+	struct sa1111 *sachip = get_irq_chip_data(irq);
+	void __iomem *mapbase = sachip->base + SA1111_INTC;
 	unsigned long ie0;
 
 	ie0 = sa1111_readl(mapbase + SA1111_INTEN0);
@@ -199,7 +254,8 @@ static void sa1111_mask_lowirq(unsigned int irq)
 
 static void sa1111_unmask_lowirq(unsigned int irq)
 {
-	void __iomem *mapbase = get_irq_chip_data(irq);
+	struct sa1111 *sachip = get_irq_chip_data(irq);
+	void __iomem *mapbase = sachip->base + SA1111_INTC;
 	unsigned long ie0;
 
 	ie0 = sa1111_readl(mapbase + SA1111_INTEN0);
@@ -216,8 +272,9 @@ static void sa1111_unmask_lowirq(unsigned int irq)
  */
 static int sa1111_retrigger_lowirq(unsigned int irq)
 {
+	struct sa1111 *sachip = get_irq_chip_data(irq);
+	void __iomem *mapbase = sachip->base + SA1111_INTC;
 	unsigned int mask = SA1111_IRQMASK_LO(irq);
-	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned long ip0;
 	int i;
 
@@ -237,8 +294,9 @@ static int sa1111_retrigger_lowirq(unsigned int irq)
 
 static int sa1111_type_lowirq(unsigned int irq, unsigned int flags)
 {
+	struct sa1111 *sachip = get_irq_chip_data(irq);
+	void __iomem *mapbase = sachip->base + SA1111_INTC;
 	unsigned int mask = SA1111_IRQMASK_LO(irq);
-	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned long ip0;
 
 	if (flags == IRQ_TYPE_PROBE)
@@ -260,8 +318,9 @@ static int sa1111_type_lowirq(unsigned int irq, unsigned int flags)
 
 static int sa1111_wake_lowirq(unsigned int irq, unsigned int on)
 {
+	struct sa1111 *sachip = get_irq_chip_data(irq);
+	void __iomem *mapbase = sachip->base + SA1111_INTC;
 	unsigned int mask = SA1111_IRQMASK_LO(irq);
-	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned long we0;
 
 	we0 = sa1111_readl(mapbase + SA1111_WAKEEN0);
@@ -286,7 +345,8 @@ static struct irq_chip sa1111_low_chip = {
 
 static void sa1111_mask_highirq(unsigned int irq)
 {
-	void __iomem *mapbase = get_irq_chip_data(irq);
+	struct sa1111 *sachip = get_irq_chip_data(irq);
+	void __iomem *mapbase = sachip->base + SA1111_INTC;
 	unsigned long ie1;
 
 	ie1 = sa1111_readl(mapbase + SA1111_INTEN1);
@@ -296,7 +356,8 @@ static void sa1111_mask_highirq(unsigned int irq)
 
 static void sa1111_unmask_highirq(unsigned int irq)
 {
-	void __iomem *mapbase = get_irq_chip_data(irq);
+	struct sa1111 *sachip = get_irq_chip_data(irq);
+	void __iomem *mapbase = sachip->base + SA1111_INTC;
 	unsigned long ie1;
 
 	ie1 = sa1111_readl(mapbase + SA1111_INTEN1);
@@ -313,8 +374,9 @@ static void sa1111_unmask_highirq(unsigned int irq)
  */
 static int sa1111_retrigger_highirq(unsigned int irq)
 {
+	struct sa1111 *sachip = get_irq_chip_data(irq);
+	void __iomem *mapbase = sachip->base + SA1111_INTC;
 	unsigned int mask = SA1111_IRQMASK_HI(irq);
-	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned long ip1;
 	int i;
 
@@ -334,8 +396,9 @@ static int sa1111_retrigger_highirq(unsigned int irq)
 
 static int sa1111_type_highirq(unsigned int irq, unsigned int flags)
 {
+	struct sa1111 *sachip = get_irq_chip_data(irq);
+	void __iomem *mapbase = sachip->base + SA1111_INTC;
 	unsigned int mask = SA1111_IRQMASK_HI(irq);
-	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned long ip1;
 
 	if (flags == IRQ_TYPE_PROBE)
@@ -357,8 +420,9 @@ static int sa1111_type_highirq(unsigned int irq, unsigned int flags)
 
 static int sa1111_wake_highirq(unsigned int irq, unsigned int on)
 {
+	struct sa1111 *sachip = get_irq_chip_data(irq);
+	void __iomem *mapbase = sachip->base + SA1111_INTC;
 	unsigned int mask = SA1111_IRQMASK_HI(irq);
-	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned long we1;
 
 	we1 = sa1111_readl(mapbase + SA1111_WAKEEN1);
@@ -412,14 +476,14 @@ static void sa1111_setup_irq(struct sa1111 *sachip)
 
 	for (irq = IRQ_GPAIN0; irq <= SSPROR; irq++) {
 		set_irq_chip(irq, &sa1111_low_chip);
-		set_irq_chip_data(irq, irqbase);
+		set_irq_chip_data(irq, sachip);
 		set_irq_handler(irq, handle_edge_irq);
 		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 	}
 
 	for (irq = AUDXMTDMADONEA; irq <= IRQ_S1_BVD1_STSCHG; irq++) {
 		set_irq_chip(irq, &sa1111_high_chip);
-		set_irq_chip_data(irq, irqbase);
+		set_irq_chip_data(irq, sachip);
 		set_irq_handler(irq, handle_edge_irq);
 		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 	}
@@ -428,7 +492,7 @@ static void sa1111_setup_irq(struct sa1111 *sachip)
 	 * Register SA1111 interrupt
 	 */
 	set_irq_type(sachip->irq, IRQ_TYPE_EDGE_RISING);
-	set_irq_data(sachip->irq, irqbase);
+	set_irq_data(sachip->irq, sachip);
 	set_irq_chained_handler(sachip->irq, sa1111_irq_handler);
 }
 
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index 37bda5f3dde3..9012004321dd 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -140,6 +140,7 @@ EXPORT_SYMBOL(reset_scoop);
 EXPORT_SYMBOL(read_scoop_reg);
 EXPORT_SYMBOL(write_scoop_reg);
 
+#ifdef CONFIG_PM
 static void check_scoop_reg(struct scoop_dev *sdev)
 {
 	unsigned short mcr;
@@ -149,7 +150,6 @@ static void check_scoop_reg(struct scoop_dev *sdev)
 		iowrite16(0x0101, sdev->base + SCOOP_MCR);
 }
 
-#ifdef CONFIG_PM
 static int scoop_suspend(struct platform_device *dev, pm_message_t state)
 {
 	struct scoop_dev *sdev = platform_get_drvdata(dev);
diff --git a/arch/arm/configs/ap4evb_defconfig b/arch/arm/configs/ap4evb_defconfig
new file mode 100644
index 000000000000..e14229be7676
--- /dev/null
+++ b/arch/arm/configs/ap4evb_defconfig
@@ -0,0 +1,779 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33-rc7
+# Mon Feb  8 12:25:36 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+CONFIG_ARCH_SHMOBILE=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+
+#
+# SH-Mobile System Type
+#
+# CONFIG_ARCH_SH7367 is not set
+# CONFIG_ARCH_SH7377 is not set
+CONFIG_ARCH_SH7372=y
+
+#
+# SH-Mobile Board Type
+#
+CONFIG_MACH_AP4EVB=y
+
+#
+# SH-Mobile System Configuration
+#
+
+#
+# Memory configuration
+#
+CONFIG_MEMORY_START=0x40000000
+CONFIG_MEMORY_SIZE=0x10000000
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TIMER_CMT=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=sh-sci.0,115200"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_SUSPEND is not set
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=8
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_FSNOTIFY is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/cm_t35_defconfig b/arch/arm/configs/cm_t35_defconfig
index 893cd267e075..032b49bad91f 100644
--- a/arch/arm/configs/cm_t35_defconfig
+++ b/arch/arm/configs/cm_t35_defconfig
@@ -358,7 +358,7 @@ CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 # CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
+CONFIG_PM_RUNTIME=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
diff --git a/arch/arm/configs/g3evm_defconfig b/arch/arm/configs/g3evm_defconfig
new file mode 100644
index 000000000000..3c19031961db
--- /dev/null
+++ b/arch/arm/configs/g3evm_defconfig
@@ -0,0 +1,774 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33-rc7
+# Mon Feb  8 12:20:01 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+CONFIG_ARCH_SHMOBILE=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+
+#
+# SH-Mobile System Type
+#
+CONFIG_ARCH_SH7367=y
+# CONFIG_ARCH_SH7377 is not set
+# CONFIG_ARCH_SH7372 is not set
+
+#
+# SH-Mobile Board Type
+#
+CONFIG_MACH_G3EVM=y
+
+#
+# SH-Mobile System Configuration
+#
+
+#
+# Memory configuration
+#
+CONFIG_MEMORY_START=0x50000000
+CONFIG_MEMORY_SIZE=0x08000000
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TIMER_CMT=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_V6=y
+# CONFIG_CPU_32v6K is not set
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_V6=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_ERRATA_411920 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttySC1,115200 earlyprintk=sh-sci.1,115200"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_SUSPEND is not set
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=8
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_FSNOTIFY is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/g4evm_defconfig b/arch/arm/configs/g4evm_defconfig
new file mode 100644
index 000000000000..8ee79a537134
--- /dev/null
+++ b/arch/arm/configs/g4evm_defconfig
@@ -0,0 +1,779 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33-rc7
+# Mon Feb  8 12:21:35 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+CONFIG_ARCH_SHMOBILE=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+
+#
+# SH-Mobile System Type
+#
+# CONFIG_ARCH_SH7367 is not set
+CONFIG_ARCH_SH7377=y
+# CONFIG_ARCH_SH7372 is not set
+
+#
+# SH-Mobile Board Type
+#
+CONFIG_MACH_G4EVM=y
+
+#
+# SH-Mobile System Configuration
+#
+
+#
+# Memory configuration
+#
+CONFIG_MEMORY_START=0x40000000
+CONFIG_MEMORY_SIZE=0x08000000
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TIMER_CMT=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttySC4,115200 earlyprintk=sh-sci.4,115200"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_SUSPEND is not set
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=8
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_FSNOTIFY is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/imote2_defconfig b/arch/arm/configs/imote2_defconfig
new file mode 100644
index 000000000000..95d2becfc664
--- /dev/null
+++ b/arch/arm/configs/imote2_defconfig
@@ -0,0 +1,2077 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33-rc8
+# Sat Feb 13 21:48:53 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+# CONFIG_RD_LZO is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_SLOW_WORK=y
+# CONFIG_SLOW_WORK_DEBUG is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+
+#
+# Intel/Marvell Dev Platforms (sorted by hardware release time)
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_ZYLONITE300 is not set
+# CONFIG_MACH_ZYLONITE320 is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
+
+#
+# Third Party Dev Platforms (sorted by vendor name)
+#
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_ARCH_VIPER is not set
+# CONFIG_MACH_ARCOM_ZEUS is not set
+# CONFIG_MACH_BALLOON3 is not set
+# CONFIG_MACH_CSB726 is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_EXEDA is not set
+# CONFIG_MACH_CM_X300 is not set
+# CONFIG_ARCH_GUMSTIX is not set
+CONFIG_MACH_INTELMOTE2=y
+# CONFIG_MACH_STARGATE2 is not set
+# CONFIG_MACH_XCEP is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_COLIBRI300 is not set
+# CONFIG_MACH_COLIBRI320 is not set
+
+#
+# End-user Products (sorted by vendor name)
+#
+# CONFIG_MACH_H4700 is not set
+# CONFIG_MACH_H5000 is not set
+# CONFIG_MACH_HIMALAYA is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_MIOA701 is not set
+# CONFIG_PXA_EZX is not set
+# CONFIG_MACH_MP900C is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+CONFIG_PXA27x=y
+CONFIG_PXA_SSP=y
+CONFIG_PXA_HAVE_BOARD_IRQS=y
+CONFIG_PLAT_PXA=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=3 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+CONFIG_CPU_FREQ_DEBUG=y
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=m
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_APM_EMULATION=y
+CONFIG_PM_RUNTIME=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+# CONFIG_NF_CT_PROTO_DCCP is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+# CONFIG_NETFILTER_TPROXY is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_HL=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_STP=m
+CONFIG_BRIDGE=m
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+CONFIG_IEEE802154=y
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=y
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=y
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_H4=y
+# CONFIG_BT_HCIUART_BCSP is not set
+# CONFIG_BT_HCIUART_LL is not set
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+# CONFIG_BT_ATH3K is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_HAVE_MTD_OTP=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_OTP=y
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PXA2XX=y
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+# CONFIG_BLK_DEV_DRBD is not set
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_NET_ETHERNET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_IEEE802154_DRIVERS=y
+# CONFIG_IEEE802154_FAKEHARD is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_APMPOWER is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+CONFIG_KEYBOARD_PXA27x=y
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+CONFIG_TOUCHSCREEN_DA9034=y
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_UINPUT=y
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=8
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_PXA2XX=y
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_APM_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_DA9030 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+CONFIG_PMIC_DA903X=y
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_DEBUG=y
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
+CONFIG_REGULATOR_USERSPACE_CONSUMER=y
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8660 is not set
+CONFIG_REGULATOR_DA903X=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+CONFIG_MEDIA_SUPPORT=y
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
+
+#
+# Multimedia drivers
+#
+CONFIG_IR_CORE=y
+CONFIG_VIDEO_IR=y
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=y
+CONFIG_MEDIA_TUNER_CUSTOMISE=y
+# CONFIG_MEDIA_TUNER_SIMPLE is not set
+# CONFIG_MEDIA_TUNER_TDA8290 is not set
+# CONFIG_MEDIA_TUNER_TDA827X is not set
+# CONFIG_MEDIA_TUNER_TDA18271 is not set
+# CONFIG_MEDIA_TUNER_TDA9887 is not set
+# CONFIG_MEDIA_TUNER_TEA5761 is not set
+# CONFIG_MEDIA_TUNER_TEA5767 is not set
+# CONFIG_MEDIA_TUNER_MT20XX is not set
+# CONFIG_MEDIA_TUNER_MT2060 is not set
+# CONFIG_MEDIA_TUNER_MT2266 is not set
+# CONFIG_MEDIA_TUNER_MT2131 is not set
+# CONFIG_MEDIA_TUNER_QT1010 is not set
+# CONFIG_MEDIA_TUNER_XC2028 is not set
+# CONFIG_MEDIA_TUNER_XC5000 is not set
+# CONFIG_MEDIA_TUNER_MXL5005S is not set
+# CONFIG_MEDIA_TUNER_MXL5007T is not set
+# CONFIG_MEDIA_TUNER_MC44S803 is not set
+CONFIG_MEDIA_TUNER_MAX2165=m
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEOBUF_GEN=y
+CONFIG_VIDEOBUF_DMA_SG=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+CONFIG_VIDEO_IR_I2C=y
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TDA9875 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_CS5345 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+
+#
+# RDS decoders
+#
+# CONFIG_VIDEO_SAA6588 is not set
+
+#
+# Video decoders
+#
+# CONFIG_VIDEO_ADV7180 is not set
+# CONFIG_VIDEO_BT819 is not set
+# CONFIG_VIDEO_BT856 is not set
+# CONFIG_VIDEO_BT866 is not set
+# CONFIG_VIDEO_KS0127 is not set
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_MT9V011 is not set
+# CONFIG_VIDEO_TCM825X is not set
+# CONFIG_VIDEO_SAA7110 is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_SAA7191 is not set
+# CONFIG_VIDEO_TVP514X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_VPX3220 is not set
+
+#
+# Video and audio decoders
+#
+# CONFIG_VIDEO_CX25840 is not set
+
+#
+# MPEG video encoders
+#
+# CONFIG_VIDEO_CX2341X is not set
+
+#
+# Video encoders
+#
+# CONFIG_VIDEO_SAA7127 is not set
+# CONFIG_VIDEO_SAA7185 is not set
+# CONFIG_VIDEO_ADV7170 is not set
+# CONFIG_VIDEO_ADV7175 is not set
+# CONFIG_VIDEO_THS7303 is not set
+# CONFIG_VIDEO_ADV7343 is not set
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+CONFIG_SOC_CAMERA=y
+# CONFIG_SOC_CAMERA_MT9M001 is not set
+CONFIG_SOC_CAMERA_MT9M111=y
+# CONFIG_SOC_CAMERA_MT9T031 is not set
+# CONFIG_SOC_CAMERA_MT9T112 is not set
+# CONFIG_SOC_CAMERA_MT9V022 is not set
+# CONFIG_SOC_CAMERA_RJ54N1 is not set
+# CONFIG_SOC_CAMERA_TW9910 is not set
+# CONFIG_SOC_CAMERA_PLATFORM is not set
+# CONFIG_SOC_CAMERA_OV772X is not set
+# CONFIG_SOC_CAMERA_OV9640 is not set
+CONFIG_VIDEO_PXA27x=y
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
+# CONFIG_V4L_USB_DRIVERS is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_I2C_SI4713 is not set
+# CONFIG_RADIO_SI4713 is not set
+# CONFIG_USB_DSBR is not set
+# CONFIG_RADIO_SI470X is not set
+# CONFIG_USB_MR800 is not set
+CONFIG_RADIO_TEA5764=y
+CONFIG_RADIO_TEA5764_XTAL=y
+# CONFIG_RADIO_TEF6862 is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+CONFIG_FB_PXA_OVERLAY=y
+# CONFIG_FB_PXA_SMARTPANEL is not set
+CONFIG_FB_PXA_PARAMETERS=y
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_W100 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+# CONFIG_BACKLIGHT_DA903X is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+CONFIG_SND_PXA2XX_LIB=y
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_PXA2XX_SOC=y
+# CONFIG_SND_PXA2XX_SOC_IMOTE2 is not set
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+# CONFIG_HID_PID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_APPLE=m
+# CONFIG_HID_WACOM is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=y
+# CONFIG_USB_ETH_RNDIS is not set
+# CONFIG_USB_ETH_EEM is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_MASS_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ULPI is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_UNSAFE_RESUME=y
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_PXA=y
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+CONFIG_MMC_SPI=y
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_GPIO is not set
+CONFIG_LEDS_LP3944=y
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DA903X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_REGULATOR is not set
+# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_SA1100 is not set
+# CONFIG_RTC_DRV_PXA is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=m
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=m
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+# CONFIG_NFS_V4 is not set
+# CONFIG_ROOT_NFS is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+# CONFIG_NFSD_V4 is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+# CONFIG_CIFS_STATS2 is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_LOCK_ALLOC=y
+CONFIG_PROVE_LOCKING=y
+CONFIG_LOCKDEP=y
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_LOCKDEP is not set
+CONFIG_TRACE_IRQFLAGS=y
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG2=m
+CONFIG_CRYPTO_PCOMP=m
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=m
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_GHASH=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_SALSA20 is not set
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index 5fc44c94b0ad..4611d3ce451a 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc6
-# Sat Nov  7 20:31:18 2009
+# Linux kernel version: 2.6.33-rc6
+# Thu Feb  4 23:08:54 2010
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -32,6 +32,12 @@ CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -45,6 +51,7 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -127,14 +134,41 @@ CONFIG_LBDAF=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -163,6 +197,7 @@ CONFIG_MMU=y
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
 CONFIG_ARCH_KIRKWOOD=y
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
@@ -185,6 +220,7 @@ CONFIG_ARCH_KIRKWOOD=y
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
 # CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
 
 #
 # Marvell Kirkwood Implementations
@@ -195,7 +231,11 @@ CONFIG_MACH_RD88F6281=y
 CONFIG_MACH_MV88F6281GTW_GE=y
 CONFIG_MACH_SHEEVAPLUG=y
 CONFIG_MACH_TS219=y
+CONFIG_MACH_TS41X=y
+CONFIG_MACH_OPENRD=y
 CONFIG_MACH_OPENRD_BASE=y
+CONFIG_MACH_OPENRD_CLIENT=y
+CONFIG_MACH_NETSPACE_V2=y
 CONFIG_PLAT_ORION=y
 
 #
@@ -262,12 +302,10 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_SPLIT_PTLOCK_CPUS=999999
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
@@ -398,15 +436,18 @@ CONFIG_NET_PKTGEN=m
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
 CONFIG_CFG80211=y
 # CONFIG_NL80211_TESTMODE is not set
 # CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
 # CONFIG_CFG80211_REG_DEBUG is not set
 CONFIG_CFG80211_DEFAULT_PS=y
-CONFIG_CFG80211_DEFAULT_PS_VALUE=1
 # CONFIG_CFG80211_DEBUGFS is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
+CONFIG_CFG80211_WEXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_LIB80211=y
 # CONFIG_LIB80211_DEBUG is not set
@@ -556,6 +597,10 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
@@ -606,7 +651,9 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
 # CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
@@ -642,6 +689,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
@@ -696,15 +744,16 @@ CONFIG_SATA_MV=y
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
 # CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_SIL680 is not set
 # CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_SCH is not set
@@ -720,7 +769,7 @@ CONFIG_SATA_MV=y
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -828,13 +877,6 @@ CONFIG_MV643XX_ETH=y
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-CONFIG_LIBERTAS=y
-# CONFIG_LIBERTAS_USB is not set
-CONFIG_LIBERTAS_SDIO=y
-# CONFIG_LIBERTAS_SPI is not set
-# CONFIG_LIBERTAS_DEBUG is not set
 # CONFIG_LIBERTAS_THINFIRM is not set
 # CONFIG_ATMEL is not set
 # CONFIG_AT76C50X_USB is not set
@@ -846,19 +888,24 @@ CONFIG_LIBERTAS_SDIO=y
 # CONFIG_ADM8211 is not set
 # CONFIG_MAC80211_HWSIM is not set
 # CONFIG_MWL8K is not set
-# CONFIG_P54_COMMON is not set
 # CONFIG_ATH_COMMON is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_HOSTAP is not set
 # CONFIG_IPW2100 is not set
 # CONFIG_IPW2200 is not set
 # CONFIG_IWLWIFI is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_ZD1211RW is not set
-# CONFIG_RT2X00 is not set
+# CONFIG_IWM is not set
+CONFIG_LIBERTAS=y
+# CONFIG_LIBERTAS_USB is not set
+CONFIG_LIBERTAS_SDIO=y
+# CONFIG_LIBERTAS_SPI is not set
+# CONFIG_LIBERTAS_DEBUG is not set
 # CONFIG_HERMES is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_RT2X00 is not set
 # CONFIG_WL12XX is not set
-# CONFIG_IWM is not set
+# CONFIG_ZD1211RW is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -881,6 +928,7 @@ CONFIG_LIBERTAS_SDIO=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -890,6 +938,7 @@ CONFIG_LIBERTAS_SDIO=y
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -933,6 +982,7 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -1019,11 +1069,6 @@ CONFIG_I2C_MV64XXX=y
 # CONFIG_I2C_TINY_USB is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -1032,7 +1077,6 @@ CONFIG_I2C_MV64XXX=y
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -1048,6 +1092,8 @@ CONFIG_SPI_MASTER=y
 # CONFIG_SPI_BITBANG is not set
 # CONFIG_SPI_GPIO is not set
 CONFIG_SPI_ORION=y
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
 
 #
 # SPI Protocol Masters
@@ -1074,10 +1120,12 @@ CONFIG_GPIO_SYSFS=y
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
 # PCI GPIO expanders:
 #
+# CONFIG_GPIO_CS5535 is not set
 # CONFIG_GPIO_BT8XX is not set
 # CONFIG_GPIO_LANGWELL is not set
 
@@ -1116,6 +1164,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_TC6393XB is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
@@ -1123,6 +1172,8 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1305,6 +1356,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # OTG and related infrastructure
 #
 # CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ULPI is not set
 # CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 CONFIG_MMC=y
@@ -1344,6 +1396,7 @@ CONFIG_LEDS_GPIO_PLATFORM=y
 # CONFIG_LEDS_PCA955X is not set
 # CONFIG_LEDS_DAC124S085 is not set
 # CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
 
 #
 # LED Triggers
@@ -1388,6 +1441,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 CONFIG_RTC_DRV_S35390A=y
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -1417,7 +1471,9 @@ CONFIG_RTC_DRV_S35390A=y
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1684,7 +1740,9 @@ CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
 # CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
 
 #
 # Security options
@@ -1692,7 +1750,11 @@ CONFIG_DEBUG_LL=y
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig
index d2a90eb844a9..ff44bd1615c0 100644
--- a/arch/arm/configs/mini2440_defconfig
+++ b/arch/arm/configs/mini2440_defconfig
@@ -184,7 +184,7 @@ CONFIG_S3C24XX_PWM=y
 CONFIG_S3C24XX_GPIO_EXTRA=0
 CONFIG_S3C2410_DMA=y
 # CONFIG_S3C2410_DMA_DEBUG is not set
-CONFIG_S3C24XX_ADC=y
+CONFIG_S3C_ADC=y
 CONFIG_PLAT_S3C=y
 CONFIG_CPU_LLSERIAL_S3C2440_ONLY=y
 CONFIG_CPU_LLSERIAL_S3C2440=y
@@ -199,8 +199,8 @@ CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
 #
 # Power management
 #
-# CONFIG_S3C2410_PM_DEBUG is not set
-# CONFIG_S3C2410_PM_CHECK is not set
+# CONFIG_SAMSUNG_PM_DEBUG is not set
+# CONFIG_SAMSUNG_PM_CHECK is not set
 CONFIG_S3C_LOWLEVEL_UART_PORT=0
 CONFIG_S3C_GPIO_SPACE=0
 
diff --git a/arch/arm/configs/mmp2_defconfig b/arch/arm/configs/mmp2_defconfig
new file mode 100644
index 000000000000..03f76cfc941c
--- /dev/null
+++ b/arch/arm/configs/mmp2_defconfig
@@ -0,0 +1,1194 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33-rc2
+# Tue Jan  5 13:55:22 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+CONFIG_ARCH_MMP=y
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_MACH_TAVOREVB is not set
+
+#
+# Marvell PXA168/910/MMP2 Implmentations
+#
+# CONFIG_MACH_ASPENITE is not set
+# CONFIG_MACH_ZYLONITE2 is not set
+# CONFIG_MACH_TTC_DKB is not set
+CONFIG_MACH_FLINT=y
+CONFIG_CPU_MMP2=y
+CONFIG_PLAT_PXA=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_V6=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_V6=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_ERRATA_411920 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M user_debug=255"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH=""
+# CONFIG_DEVTMPFS is not set
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+# CONFIG_MTD_CHAR is not set
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_PXA3xx is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_ONENAND=y
+# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
+CONFIG_MTD_ONENAND_GENERIC=y
+# CONFIG_MTD_ONENAND_OTP is not set
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_HOSTAP is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_CORE=y
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+CONFIG_MFD_88PM8607=y
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_MAX8660=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+CONFIG_REGULATOR_88PM8607=y
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig
index 6afa2c108eaa..da4710dd1da1 100644
--- a/arch/arm/configs/mv78xx0_defconfig
+++ b/arch/arm/configs/mv78xx0_defconfig
@@ -176,6 +176,7 @@ CONFIG_ARCH_MV78XX0=y
 #
 CONFIG_MACH_DB78X00_BP=y
 CONFIG_MACH_RD78X00_MASA=y
+CONFIG_MACH_TERASTATION_WXL=y
 CONFIG_PLAT_ORION=y
 
 #
diff --git a/arch/arm/configs/mx1ads_defconfig b/arch/arm/configs/mx1ads_defconfig
deleted file mode 100644
index 3cabbb6d9276..000000000000
--- a/arch/arm/configs/mx1ads_defconfig
+++ /dev/null
@@ -1,742 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 02:15:46 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_SYSCTL is not set
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-CONFIG_ARCH_IMX=y
-# CONFIG_ARCH_H720X is not set
-
-#
-# IMX Implementations
-#
-CONFIG_ARCH_MX1ADS=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_PREEMPT=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySMX0,57600n8 ip=bootp root=/dev/nfs"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-CONFIG_FPE_NWFPE_XP=y
-CONFIG_FPE_FASTFPE=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=y
-CONFIG_PPP_BSDCOMP=y
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_RTC=m
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=y
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/mx27_defconfig b/arch/arm/configs/mx27_defconfig
index edfdd6faf800..b4c1366e9e0d 100644
--- a/arch/arm/configs/mx27_defconfig
+++ b/arch/arm/configs/mx27_defconfig
@@ -200,7 +200,7 @@ CONFIG_MACH_MX27ADS=y
 CONFIG_MACH_PCM038=y
 CONFIG_MACH_PCM970_BASEBOARD=y
 CONFIG_MACH_MX27_3DS=y
-CONFIG_MACH_MX27LITE=y
+CONFIG_MACH_IMX27LITE=y
 CONFIG_MXC_IRQ_PRIOR=y
 CONFIG_MXC_PWM=y
 
diff --git a/arch/arm/configs/mx51_defconfig b/arch/arm/configs/mx51_defconfig
new file mode 100644
index 000000000000..c88e9527a8ec
--- /dev/null
+++ b/arch/arm/configs/mx51_defconfig
@@ -0,0 +1,1286 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33-rc6
+# Tue Feb  2 15:20:48 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=18
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+
+#
+# Freescale MXC Implementations
+#
+# CONFIG_ARCH_MX1 is not set
+# CONFIG_ARCH_MX2 is not set
+# CONFIG_ARCH_MX25 is not set
+# CONFIG_ARCH_MX3 is not set
+# CONFIG_ARCH_MXC91231 is not set
+CONFIG_ARCH_MX5=y
+CONFIG_ARCH_MX51=y
+
+#
+# MX5 platforms:
+#
+CONFIG_MACH_MX51_BABBAGE=y
+# CONFIG_MXC_IRQ_PRIOR is not set
+CONFIG_MXC_TZIC=y
+# CONFIG_MXC_PWM is not set
+CONFIG_ARCH_MXC_IOMUX_V3=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=32768
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/nfs nfsroot=192.168.0.101:/shared/nfs ip=dhcp"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=m
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_PM_TEST_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH=""
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=65536
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+CONFIG_ATA=m
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_SATA_PMP=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+CONFIG_VITESSE_PHY=y
+CONFIG_SMSC_PHY=y
+CONFIG_BROADCOM_PHY=y
+CONFIG_ICPLUS_PHY=y
+CONFIG_REALTEK_PHY=y
+CONFIG_NATIONAL_PHY=y
+CONFIG_STE10XP=y
+CONFIG_LSI_ET1011C_PHY=y
+CONFIG_FIXED_PHY=y
+CONFIG_MDIO_BITBANG=y
+CONFIG_MDIO_GPIO=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+CONFIG_FEC=y
+# CONFIG_FEC2 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=m
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+CONFIG_MOUSE_PS2_ELANTECH=y
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=m
+# CONFIG_I2C_HELPER_AUTO is not set
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=m
+CONFIG_I2C_ALGOPCF=m
+CONFIG_I2C_ALGOPCA=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_IMX is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=m
+# CONFIG_MMC_SDHCI_PLTFM is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_MXC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_GPIO is not set
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
+
+#
+# LED Triggers
+#
+# CONFIG_LEDS_TRIGGERS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_MXC is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=y
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+# CONFIG_QFMT_V1 is not set
+# CONFIG_QFMT_V2 is not set
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=y
+# CONFIG_CUSE is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=m
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_ARM_UNWIND is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
+# CONFIG_SECURITY is not set
+CONFIG_SECURITYFS=y
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_RATIONAL=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/n770_defconfig b/arch/arm/configs/n770_defconfig
index 75cae18fbcb6..de0c28aa43e7 100644
--- a/arch/arm/configs/n770_defconfig
+++ b/arch/arm/configs/n770_defconfig
@@ -308,6 +308,7 @@ CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND_UP_POSSIBLE=y
 CONFIG_SUSPEND=y
 # CONFIG_APM_EMULATION is not set
+CONFIG_PM_RUNTIME=y
 
 #
 # Networking
diff --git a/arch/arm/configs/n8x0_defconfig b/arch/arm/configs/n8x0_defconfig
index e6f667c5e58a..216ad00948af 100644
--- a/arch/arm/configs/n8x0_defconfig
+++ b/arch/arm/configs/n8x0_defconfig
@@ -191,6 +191,7 @@ CONFIG_ARCH_OMAP=y
 #
 CONFIG_ARCH_OMAP_OTG=y
 # CONFIG_ARCH_OMAP1 is not set
+CONFIG_ARCH_OMAP2PLUS=y
 CONFIG_ARCH_OMAP2=y
 # CONFIG_ARCH_OMAP3 is not set
 # CONFIG_ARCH_OMAP4 is not set
@@ -198,8 +199,6 @@ CONFIG_ARCH_OMAP2=y
 #
 # OMAP Feature Selections
 #
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
 CONFIG_OMAP_RESET_CLOCKS=y
 # CONFIG_OMAP_MUX is not set
 # CONFIG_OMAP_MCBSP is not set
@@ -208,15 +207,13 @@ CONFIG_OMAP_MBOX_FWK=y
 CONFIG_OMAP_32K_TIMER=y
 CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
 # CONFIG_MACH_OMAP_GENERIC is not set
 
 #
 # OMAP Core Type
 #
-CONFIG_ARCH_OMAP24XX=y
 CONFIG_ARCH_OMAP2420=y
 # CONFIG_ARCH_OMAP2430 is not set
 
@@ -227,6 +224,9 @@ CONFIG_MACH_OMAP2_TUSB6010=y
 # CONFIG_MACH_OMAP_H4 is not set
 # CONFIG_MACH_OMAP_APOLLON is not set
 # CONFIG_MACH_OMAP_2430SDP is not set
+CONFIG_MACH_NOKIA_N800=y
+CONFIG_MACH_NOKIA_N810=y
+CONFIG_MACH_NOKIA_N810_WIMAX=y
 CONFIG_MACH_NOKIA_N8X0=y
 
 #
@@ -303,7 +303,7 @@ CONFIG_ALIGNMENT_TRAP=y
 CONFIG_ZBOOT_ROM_TEXT=0x10C08000
 CONFIG_ZBOOT_ROM_BSS=0x10200000
 # CONFIG_ZBOOT_ROM is not set
-CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 console=ttyS2,115200n8"
+CONFIG_CMDLINE="root=/dev/mmcblk0p2 console=ttyS2,115200n8 debug earlyprintk rootwait"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 
@@ -337,7 +337,14 @@ CONFIG_HAVE_AOUT=y
 #
 # Power management options
 #
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_PM_RUNTIME=y
+CONFIG_PM_OPS=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
@@ -617,7 +624,55 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_COMPAT is not set
+# CONFIG_I2C_CHARDEV is not set
+# CONFIG_I2C_HELPER_AUTO is not set
+# CONFIG_I2C_SMBUS is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
 # CONFIG_SPI_DEBUG is not set
 CONFIG_SPI_MASTER=y
@@ -673,15 +728,44 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
+# CONFIG_TPS65010 is not set
+CONFIG_MENELAUS=y
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_T7L66XB is not set
 # CONFIG_MFD_TC6387XB is not set
 # CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
+# CONFIG_AB4500_CORE is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_DUMMY is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8649 is not set
+# CONFIG_REGULATOR_MAX8660 is not set
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
 #
@@ -718,7 +802,10 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 # CONFIG_USB_MON is not set
 # CONFIG_USB_WUSB is not set
 # CONFIG_USB_WUSB_CBAF is not set
@@ -737,9 +824,10 @@ CONFIG_USB_DEVICE_CLASS=y
 CONFIG_USB_MUSB_HDRC=y
 CONFIG_USB_TUSB6010=y
 # CONFIG_USB_MUSB_HOST is not set
-CONFIG_USB_MUSB_PERIPHERAL=y
-# CONFIG_USB_MUSB_OTG is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
 # CONFIG_MUSB_PIO_ONLY is not set
 # CONFIG_USB_INVENTRA_DMA is not set
 # CONFIG_USB_TI_CPPI_DMA is not set
@@ -824,44 +912,77 @@ CONFIG_USB_GADGET_DUALSPEED=y
 # CONFIG_USB_ZERO is not set
 # CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=y
-# CONFIG_USB_ETH_RNDIS is not set
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_ETH_EEM=y
 # CONFIG_USB_GADGETFS is not set
 # CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_MASS_STORAGE is not set
 # CONFIG_USB_G_SERIAL is not set
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
 # CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_NOKIA is not set
+# CONFIG_USB_G_MULTI is not set
 
 #
 # OTG and related infrastructure
 #
 CONFIG_USB_OTG_UTILS=y
 # CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_USB_ULPI is not set
 CONFIG_NOP_USB_XCEIV=y
-# CONFIG_MMC is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_OMAP=y
+# CONFIG_MMC_SPI is not set
 # CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
 # File systems
 #
 # CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -886,8 +1007,11 @@ CONFIG_INOTIFY_USER=y
 #
 # DOS/FAT/NT Filesystems
 #
+CONFIG_FAT_FS=y
 # CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # CONFIG_NTFS_FS is not set
 
 #
diff --git a/arch/arm/configs/nuc950_defconfig b/arch/arm/configs/nuc950_defconfig
index 97300ec478dd..51cc2a260cbb 100644
--- a/arch/arm/configs/nuc950_defconfig
+++ b/arch/arm/configs/nuc950_defconfig
@@ -590,8 +590,40 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_NUC900=y
+CONFIG_GPM1040A0_320X240=y
+CONFIG_FB_NUC900_DEBUG=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+
 
 #
 # Display device support
@@ -603,6 +635,25 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 CONFIG_USB_SUPPORT=y
diff --git a/arch/arm/configs/omap3_beagle_defconfig b/arch/arm/configs/omap3_beagle_defconfig
index c7999f5b1c9a..5a9e95fa728b 100644
--- a/arch/arm/configs/omap3_beagle_defconfig
+++ b/arch/arm/configs/omap3_beagle_defconfig
@@ -324,6 +324,7 @@ CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 # CONFIG_APM_EMULATION is not set
+CONFIG_PM_RUNTIME=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
diff --git a/arch/arm/configs/omap3_defconfig b/arch/arm/configs/omap3_defconfig
index 714835e5ebec..d6ad92177324 100644
--- a/arch/arm/configs/omap3_defconfig
+++ b/arch/arm/configs/omap3_defconfig
@@ -450,7 +450,7 @@ CONFIG_SUSPEND=y
 # CONFIG_PM_TEST_SUSPEND is not set
 CONFIG_SUSPEND_FREEZER=y
 # CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
+CONFIG_PM_RUNTIME=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
diff --git a/arch/arm/configs/omap3_evm_defconfig b/arch/arm/configs/omap3_evm_defconfig
index e2ad859fbec6..a6dd6d1af806 100644
--- a/arch/arm/configs/omap3_evm_defconfig
+++ b/arch/arm/configs/omap3_evm_defconfig
@@ -340,6 +340,7 @@ CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 # CONFIG_APM_EMULATION is not set
+CONFIG_PM_RUNTIME=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
diff --git a/arch/arm/configs/omap3_touchbook_defconfig b/arch/arm/configs/omap3_touchbook_defconfig
index 74fe6be9c5ec..968fbaa8f04d 100644
--- a/arch/arm/configs/omap3_touchbook_defconfig
+++ b/arch/arm/configs/omap3_touchbook_defconfig
@@ -368,7 +368,7 @@ CONFIG_SUSPEND=y
 # CONFIG_PM_TEST_SUSPEND is not set
 CONFIG_SUSPEND_FREEZER=y
 # CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
+CONFIG_PM_RUNTIME=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
diff --git a/arch/arm/configs/omap_3430sdp_defconfig b/arch/arm/configs/omap_3430sdp_defconfig
index bb2917e5cb47..ddde429a7d9b 100644
--- a/arch/arm/configs/omap_3430sdp_defconfig
+++ b/arch/arm/configs/omap_3430sdp_defconfig
@@ -363,6 +363,7 @@ CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 # CONFIG_APM_EMULATION is not set
+CONFIG_PM_RUNTIME=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
diff --git a/arch/arm/configs/omap_3630sdp_defconfig b/arch/arm/configs/omap_3630sdp_defconfig
index d25c3d4424ca..609f348b1055 100644
--- a/arch/arm/configs/omap_3630sdp_defconfig
+++ b/arch/arm/configs/omap_3630sdp_defconfig
@@ -361,7 +361,7 @@ CONFIG_SUSPEND=y
 # CONFIG_PM_TEST_SUSPEND is not set
 CONFIG_SUSPEND_FREEZER=y
 # CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
+CONFIG_PM_RUNTIME=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
diff --git a/arch/arm/configs/omap_h2_1610_defconfig b/arch/arm/configs/omap_h2_1610_defconfig
index 523189586a4b..91ef2ed0f80a 100644
--- a/arch/arm/configs/omap_h2_1610_defconfig
+++ b/arch/arm/configs/omap_h2_1610_defconfig
@@ -331,6 +331,7 @@ CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 # CONFIG_APM_EMULATION is not set
+CONFIG_PM_RUNTIME=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 
 #
diff --git a/arch/arm/configs/omap_zoom2_defconfig b/arch/arm/configs/omap_zoom2_defconfig
index a82e81332a03..f5c6e11cf189 100644
--- a/arch/arm/configs/omap_zoom2_defconfig
+++ b/arch/arm/configs/omap_zoom2_defconfig
@@ -343,6 +343,7 @@ CONFIG_SUSPEND=y
 # CONFIG_PM_TEST_SUSPEND is not set
 CONFIG_SUSPEND_FREEZER=y
 # CONFIG_APM_EMULATION is not set
+CONFIG_PM_RUNTIME=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
diff --git a/arch/arm/configs/omap_zoom3_defconfig b/arch/arm/configs/omap_zoom3_defconfig
index ff8ac3dcc31d..ea9a5012d332 100644
--- a/arch/arm/configs/omap_zoom3_defconfig
+++ b/arch/arm/configs/omap_zoom3_defconfig
@@ -361,7 +361,7 @@ CONFIG_SUSPEND=y
 # CONFIG_PM_TEST_SUSPEND is not set
 CONFIG_SUSPEND_FREEZER=y
 # CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
+CONFIG_PM_RUNTIME=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index 85b05d3e279b..ee1ebd8dfa80 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc6
-# Sat Nov  7 20:52:21 2009
+# Linux kernel version: 2.6.33-rc6
+# Thu Feb  4 23:30:00 2010
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -32,6 +32,12 @@ CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -45,6 +51,7 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -122,14 +129,41 @@ CONFIG_LBDAF=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -158,6 +192,7 @@ CONFIG_MMU=y
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
 # CONFIG_ARCH_KIRKWOOD is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
@@ -180,6 +215,7 @@ CONFIG_ARCH_ORION5X=y
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
 # CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
 
 #
 # Orion Implementations
@@ -192,6 +228,7 @@ CONFIG_MACH_TS209=y
 CONFIG_MACH_TERASTATION_PRO2=y
 CONFIG_MACH_LINKSTATION_PRO=y
 CONFIG_MACH_LINKSTATION_MINI=y
+CONFIG_MACH_LINKSTATION_LS_HGL=y
 CONFIG_MACH_TS409=y
 CONFIG_MACH_WRT350N_V2=y
 CONFIG_MACH_TS78XX=y
@@ -268,12 +305,10 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_SPLIT_PTLOCK_CPUS=999999
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_LEDS=y
@@ -412,10 +447,6 @@ CONFIG_NET_PKTGEN=m
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_LIB80211 is not set
 
 #
@@ -554,6 +585,10 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
@@ -562,6 +597,7 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MG_DISK is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_PHANTOM is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
@@ -569,6 +605,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -621,7 +658,9 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
 # CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
@@ -657,6 +696,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
@@ -711,15 +751,16 @@ CONFIG_SATA_MV=y
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
 # CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_SIL680 is not set
 # CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
@@ -736,7 +777,7 @@ CONFIG_SATA_MV=y
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -842,8 +883,10 @@ CONFIG_MV643XX_ETH=y
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -866,6 +909,7 @@ CONFIG_WLAN=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -875,6 +919,7 @@ CONFIG_WLAN=y
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -993,11 +1038,6 @@ CONFIG_I2C_MV64XXX=y
 # CONFIG_I2C_TINY_USB is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -1006,7 +1046,6 @@ CONFIG_I2C_MV64XXX=y
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -1033,10 +1072,12 @@ CONFIG_GPIO_SYSFS=y
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
 # PCI GPIO expanders:
 #
+# CONFIG_GPIO_CS5535 is not set
 # CONFIG_GPIO_BT8XX is not set
 # CONFIG_GPIO_LANGWELL is not set
 
@@ -1079,6 +1120,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
 CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -1104,6 +1146,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_TMP421 is not set
@@ -1118,6 +1161,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
 # CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
@@ -1140,11 +1184,13 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_TC6393XB is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1316,6 +1362,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # OTG and related infrastructure
 #
 # CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ULPI is not set
 # CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
@@ -1332,6 +1379,7 @@ CONFIG_LEDS_GPIO_PLATFORM=y
 # CONFIG_LEDS_LP3944 is not set
 # CONFIG_LEDS_PCA955X is not set
 # CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
 
 #
 # LED Triggers
@@ -1377,6 +1425,7 @@ CONFIG_RTC_DRV_PCF8563=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 CONFIG_RTC_DRV_M41T80=y
 # CONFIG_RTC_DRV_M41T80_WDT is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 CONFIG_RTC_DRV_S35390A=y
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -1398,7 +1447,9 @@ CONFIG_RTC_DRV_S35390A=y
 CONFIG_RTC_DRV_M48T86=y
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1686,7 +1737,9 @@ CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
 # CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
 
 #
 # Security options
@@ -1694,7 +1747,11 @@ CONFIG_DEBUG_LL=y
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/arm/configs/pxa168_defconfig b/arch/arm/configs/pxa168_defconfig
index 791b8c39aefc..113511f91eb7 100644
--- a/arch/arm/configs/pxa168_defconfig
+++ b/arch/arm/configs/pxa168_defconfig
@@ -1,15 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc3
-# Fri Mar 20 13:43:13 2009
+# Linux kernel version: 2.6.33-rc3
+# Tue Jan 12 08:57:10 2010
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,13 +16,12 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -35,6 +32,12 @@ CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -46,11 +49,13 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -64,10 +69,10 @@ CONFIG_NAMESPACES=y
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
 # CONFIG_NET_NS is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
@@ -78,17 +83,20 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -98,6 +106,11 @@ CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -109,8 +122,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -118,31 +130,62 @@ CONFIG_BLOCK=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
 # System Type
 #
+CONFIG_MMU=y
 # CONFIG_ARCH_AAEC2000 is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -150,26 +193,30 @@ CONFIG_DEFAULT_IOSCHED="cfq"
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
 # CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
 # CONFIG_ARCH_ORION5X is not set
+CONFIG_ARCH_MMP=y
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
-CONFIG_ARCH_MMP=y
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
 # CONFIG_MACH_TAVOREVB is not set
 
 #
@@ -177,6 +224,7 @@ CONFIG_ARCH_MMP=y
 #
 CONFIG_MACH_ASPENITE=y
 CONFIG_MACH_ZYLONITE2=y
+CONFIG_MACH_AVENGERS_LITE=y
 # CONFIG_MACH_TTC_DKB is not set
 CONFIG_CPU_PXA168=y
 CONFIG_PLAT_PXA=y
@@ -187,7 +235,7 @@ CONFIG_PLAT_PXA=y
 CONFIG_CPU_MOHAWK=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_LEGACY=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_V4WB=y
 CONFIG_CPU_TLB_V4WBI=y
@@ -201,7 +249,7 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
 CONFIG_IWMMXT=y
 CONFIG_COMMON_CLKDEV=y
 
@@ -223,13 +271,15 @@ CONFIG_VMSPLIT_3G=y
 # CONFIG_VMSPLIT_2G is not set
 # CONFIG_VMSPLIT_1G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -237,12 +287,14 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_SPLIT_PTLOCK_CPUS=999999
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
@@ -288,7 +340,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -330,6 +381,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -343,6 +395,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -355,13 +409,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -374,6 +428,7 @@ CONFIG_WIRELESS_OLD_REGULATORY=y
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_FW_LOADER=y
@@ -412,8 +467,10 @@ CONFIG_MII=y
 # CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
 # CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
 # CONFIG_SMC911X is not set
 # CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -422,15 +479,12 @@ CONFIG_SMC91X=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -442,6 +496,7 @@ CONFIG_SMC91X=y
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
@@ -449,6 +504,7 @@ CONFIG_SMC91X=y
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -510,6 +566,11 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
@@ -530,11 +591,14 @@ CONFIG_GPIOLIB=y
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -555,22 +619,8 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_T7L66XB is not set
 # CONFIG_MFD_TC6387XB is not set
 # CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -595,13 +645,17 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -613,10 +667,13 @@ CONFIG_RTC_LIB=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -627,6 +684,11 @@ CONFIG_INOTIFY_USER=y
 CONFIG_GENERIC_ACL=y
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -673,6 +735,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -681,7 +744,6 @@ CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -706,6 +768,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -714,11 +777,15 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_PREEMPT is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -738,28 +805,33 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -768,7 +840,9 @@ CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
 # CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
 
 #
 # Security options
@@ -776,13 +850,16 @@ CONFIG_DEBUG_LL=y
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -791,10 +868,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -822,11 +901,13 @@ CONFIG_CRYPTO_CBC=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -863,6 +944,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -870,6 +952,7 @@ CONFIG_CRYPTO_DES=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -884,7 +967,7 @@ CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/raumfeld_defconfig b/arch/arm/configs/raumfeld_defconfig
new file mode 100644
index 000000000000..acb1a8f30e31
--- /dev/null
+++ b/arch/arm/configs/raumfeld_defconfig
@@ -0,0 +1,1898 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc5
+# Sun Nov  1 21:57:32 2009
+#
+CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+CONFIG_SLOW_WORK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+
+#
+# Supported PXA3xx Processor Variants
+#
+CONFIG_CPU_PXA300=y
+# CONFIG_CPU_PXA310 is not set
+CONFIG_CPU_PXA320=y
+# CONFIG_CPU_PXA930 is not set
+# CONFIG_CPU_PXA935 is not set
+# CONFIG_CPU_PXA950 is not set
+
+#
+# Intel/Marvell Dev Platforms (sorted by hardware release time)
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
+
+#
+# Third Party Dev Platforms (sorted by vendor name)
+#
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_ARCH_VIPER is not set
+# CONFIG_MACH_BALLOON3 is not set
+# CONFIG_MACH_CSB726 is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_EXEDA is not set
+# CONFIG_MACH_CM_X300 is not set
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
+# CONFIG_MACH_STARGATE2 is not set
+# CONFIG_MACH_XCEP is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_COLIBRI300 is not set
+# CONFIG_MACH_COLIBRI320 is not set
+
+#
+# End-user Products (sorted by vendor name)
+#
+# CONFIG_MACH_H4700 is not set
+# CONFIG_MACH_H5000 is not set
+# CONFIG_MACH_HIMALAYA is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_MIOA701 is not set
+# CONFIG_PXA_EZX is not set
+# CONFIG_MACH_MP900C is not set
+# CONFIG_ARCH_PXA_PALM is not set
+CONFIG_MACH_RAUMFELD_RC=y
+CONFIG_MACH_RAUMFELD_CONNECTOR=y
+CONFIG_MACH_RAUMFELD_PROTO=y
+CONFIG_MACH_RAUMFELD_SPEAKER=y
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+CONFIG_PXA3xx=y
+CONFIG_PXA_SSP=y
+CONFIG_PLAT_PXA=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSC3=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_IO_36=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_XSC3L2=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_IWMMXT=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="console=ttyS0,115200 rw"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_APM_EMULATION=y
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=y
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+CONFIG_CFG80211_REG_DEBUG=y
+CONFIG_CFG80211_DEFAULT_PS=y
+CONFIG_CFG80211_DEFAULT_PS_VALUE=1
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=y
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=y
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+CONFIG_NFTL=y
+CONFIG_NFTL_RW=y
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+CONFIG_MTD_BLOCK2MTD=y
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_H1900 is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_SHARPSL is not set
+CONFIG_MTD_NAND_PXA3xx=y
+# CONFIG_MTD_NAND_PXA3xx_BUILTIN is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_ISL29003=y
+CONFIG_TI_DAC7512=y
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=y
+# CONFIG_LIBERTAS_USB is not set
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_SPI is not set
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_AT76C50X_USB is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_ATH_COMMON is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_RT2X00 is not set
+# CONFIG_WL12XX is not set
+# CONFIG_IWM is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+CONFIG_USB_USBNET=y
+# CONFIG_USB_NET_AX8817X is not set
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_CDC_EEM is not set
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_SMSC95XX is not set
+# CONFIG_USB_NET_GL620A is not set
+# CONFIG_USB_NET_NET1080 is not set
+# CONFIG_USB_NET_PLUSB is not set
+CONFIG_USB_NET_MCS7830=y
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+# CONFIG_USB_NET_ZAURUS is not set
+# CONFIG_USB_NET_INT51X1 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_PXA27x is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+CONFIG_TOUCHSCREEN_EETI=m
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+# CONFIG_INPUT_UINPUT is not set
+CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_DEBUG=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_GPIO=y
+# CONFIG_SPI_PXA2XX is not set
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_DEBUG_GPIO=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+CONFIG_W1=m
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_DS2490 is not set
+# CONFIG_W1_MASTER_DS2482 is not set
+# CONFIG_W1_MASTER_DS1WM is not set
+CONFIG_W1_MASTER_GPIO=m
+
+#
+# 1-wire Slaves
+#
+# CONFIG_W1_SLAVE_THERM is not set
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_DS2431 is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+CONFIG_W1_SLAVE_DS2760=m
+# CONFIG_W1_SLAVE_BQ27000 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+CONFIG_PDA_POWER=y
+# CONFIG_APM_POWER is not set
+CONFIG_BATTERY_DS2760=m
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+CONFIG_SENSORS_LIS3_SPI=y
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_DEBUG=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_MAX8660=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_OVERLAY is not set
+# CONFIG_FB_PXA_SMARTPANEL is not set
+# CONFIG_FB_PXA_PARAMETERS is not set
+CONFIG_PXA3XX_GCU=y
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_W100 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_PWM=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_LOGO_RAUMFELD_CLUT224=y
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+# CONFIG_SND_DRIVERS is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_PXA2XX_LIB=y
+# CONFIG_SND_PXA2XX_AC97 is not set
+CONFIG_SND_SPI=y
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_PXA2XX_SOC=y
+CONFIG_SND_PXA_SOC_SSP=y
+CONFIG_SND_SOC_RAUMFELD=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_AK4104=y
+CONFIG_SND_SOC_CS4270=y
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_DRAGONRISE=y
+# CONFIG_DRAGONRISE_FF is not set
+CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_TWINHAN=y
+CONFIG_HID_KENSINGTON=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_HID_GREENASIA=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_SMARTJOYPLUS=y
+# CONFIG_SMARTJOYPLUS_FF is not set
+CONFIG_HID_TOPSEED=y
+CONFIG_HID_THRUSTMASTER=y
+# CONFIG_THRUSTMASTER_FF is not set
+CONFIG_HID_ZEROPLUS=y
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_PXA=m
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_PWM is not set
+# CONFIG_LEDS_BD2802 is not set
+CONFIG_LEDS_LT3593=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_SA1100 is not set
+CONFIG_RTC_DRV_PXA=y
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+# CONFIG_AUXDISPLAY is not set
+CONFIG_UIO=y
+# CONFIG_UIO_PDRV is not set
+# CONFIG_UIO_PDRV_GENIRQ is not set
+# CONFIG_UIO_SMX is not set
+# CONFIG_UIO_SERCOS3 is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT2_FS_XIP=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_FS_XIP=y
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+CONFIG_FSCACHE=y
+CONFIG_FSCACHE_STATS=y
+# CONFIG_FSCACHE_HISTOGRAM is not set
+# CONFIG_FSCACHE_DEBUG is not set
+CONFIG_CACHEFILES=y
+# CONFIG_CACHEFILES_DEBUG is not set
+# CONFIG_CACHEFILES_HISTOGRAM is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_NFS_FSCACHE=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=y
+CONFIG_NLS_CODEPAGE_775=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=y
+CONFIG_NLS_CODEPAGE_855=y
+CONFIG_NLS_CODEPAGE_857=y
+CONFIG_NLS_CODEPAGE_860=y
+CONFIG_NLS_CODEPAGE_861=y
+CONFIG_NLS_CODEPAGE_862=y
+CONFIG_NLS_CODEPAGE_863=y
+CONFIG_NLS_CODEPAGE_864=y
+CONFIG_NLS_CODEPAGE_865=y
+CONFIG_NLS_CODEPAGE_866=y
+CONFIG_NLS_CODEPAGE_869=y
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_CODEPAGE_950=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_CODEPAGE_949=y
+CONFIG_NLS_CODEPAGE_874=y
+CONFIG_NLS_ISO8859_8=y
+CONFIG_NLS_CODEPAGE_1250=y
+CONFIG_NLS_CODEPAGE_1251=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+CONFIG_NLS_ISO8859_3=y
+CONFIG_NLS_ISO8859_4=y
+CONFIG_NLS_ISO8859_5=y
+CONFIG_NLS_ISO8859_6=y
+CONFIG_NLS_ISO8859_7=y
+CONFIG_NLS_ISO8859_9=y
+CONFIG_NLS_ISO8859_13=y
+CONFIG_NLS_ISO8859_14=y
+CONFIG_NLS_ISO8859_15=y
+CONFIG_NLS_KOI8_R=y
+CONFIG_NLS_KOI8_U=y
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig
index 193bd334fbbf..45135ffadc57 100644
--- a/arch/arm/configs/rx51_defconfig
+++ b/arch/arm/configs/rx51_defconfig
@@ -322,6 +322,7 @@ CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 # CONFIG_APM_EMULATION is not set
+CONFIG_PM_RUNTIME=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 2f10dae02796..8e94c3caeb8c 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -187,7 +187,7 @@ CONFIG_S3C24XX_GPIO_EXTRA128=y
 CONFIG_PM_SIMTEC=y
 CONFIG_S3C2410_DMA=y
 # CONFIG_S3C2410_DMA_DEBUG is not set
-CONFIG_S3C24XX_ADC=y
+CONFIG_S3C_ADC=y
 CONFIG_MACH_SMDK=y
 CONFIG_PLAT_S3C=y
 CONFIG_CPU_LLSERIAL_S3C2410=y
@@ -203,8 +203,8 @@ CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
 #
 # Power management
 #
-# CONFIG_S3C2410_PM_DEBUG is not set
-# CONFIG_S3C2410_PM_CHECK is not set
+# CONFIG_SAMSUNG_PM_DEBUG is not set
+# CONFIG_SAMSUNG_PM_CHECK is not set
 CONFIG_S3C_LOWLEVEL_UART_PORT=0
 CONFIG_S3C_GPIO_SPACE=0
 CONFIG_S3C_DEV_HSMMC=y
diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig
index f56e50fab79b..5e7d4c1b8fc1 100644
--- a/arch/arm/configs/s3c6400_defconfig
+++ b/arch/arm/configs/s3c6400_defconfig
@@ -1,14 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Mon Nov  3 10:10:30 2008
+# Linux kernel version: 2.6.33-rc4
+# Tue Jan 19 13:12:40 2010
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
 CONFIG_NO_IOPORT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
@@ -18,13 +15,13 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_HAS_CPUFREQ=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -34,13 +31,30 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 # CONFIG_SYSVIPC is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -50,8 +64,13 @@ CONFIG_NAMESPACES=y
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
@@ -62,32 +81,38 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -95,11 +120,8 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_LSF=y
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -107,33 +129,62 @@ CONFIG_LSF=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
 # System Type
 #
+CONFIG_MMU=y
 # CONFIG_ARCH_AAEC2000 is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -141,35 +192,62 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
 # CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
 # CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 CONFIG_ARCH_S3C64XX=y
+# CONFIG_ARCH_S5P6440 is not set
+# CONFIG_ARCH_S5PC1XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+CONFIG_PLAT_SAMSUNG=y
+CONFIG_SAMSUNG_CLKSRC=y
+CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
+CONFIG_SAMSUNG_IRQ_UART=y
+CONFIG_S3C_GPIO_CFG_S3C24XX=y
+CONFIG_S3C_GPIO_CFG_S3C64XX=y
+CONFIG_S3C_GPIO_PULL_UPDOWN=y
+CONFIG_SAMSUNG_GPIO_EXTRA=0
+# CONFIG_S3C_ADC is not set
+CONFIG_S3C_DEV_HSMMC=y
+CONFIG_S3C_DEV_HSMMC1=y
+CONFIG_S3C_DEV_I2C1=y
+CONFIG_S3C_DEV_FB=y
+CONFIG_S3C_DEV_USB_HOST=y
+CONFIG_S3C_DEV_USB_HSOTG=y
+CONFIG_S3C_DEV_NAND=y
 CONFIG_PLAT_S3C64XX=y
 CONFIG_CPU_S3C6400_INIT=y
 CONFIG_CPU_S3C6400_CLOCK=y
+# CONFIG_S3C64XX_DMA is not set
 CONFIG_S3C64XX_SETUP_I2C0=y
 CONFIG_S3C64XX_SETUP_I2C1=y
+CONFIG_S3C64XX_SETUP_FB_24BPP=y
+CONFIG_S3C64XX_SETUP_SDHCI_GPIO=y
 CONFIG_PLAT_S3C=y
 
 #
 # Boot options
 #
 CONFIG_S3C_BOOT_ERROR_RESET=y
+CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
 
 #
 # Power management
@@ -177,17 +255,16 @@ CONFIG_S3C_BOOT_ERROR_RESET=y
 CONFIG_S3C_LOWLEVEL_UART_PORT=0
 CONFIG_S3C_GPIO_SPACE=0
 CONFIG_S3C_GPIO_TRACK=y
-CONFIG_S3C_GPIO_PULL_UPDOWN=y
-CONFIG_S3C_GPIO_CFG_S3C24XX=y
-CONFIG_S3C_GPIO_CFG_S3C64XX=y
-CONFIG_S3C_DEV_HSMMC=y
-CONFIG_S3C_DEV_HSMMC1=y
-CONFIG_S3C_DEV_I2C1=y
+# CONFIG_MACH_SMDK6400 is not set
 CONFIG_CPU_S3C6410=y
 CONFIG_S3C6410_SETUP_SDHCI=y
+# CONFIG_MACH_ANW6410 is not set
 CONFIG_MACH_SMDK6410=y
 CONFIG_SMDK6410_SD_CH0=y
 # CONFIG_SMDK6410_SD_CH1 is not set
+# CONFIG_SMDK6410_WM1190_EV1 is not set
+# CONFIG_MACH_NCP is not set
+# CONFIG_MACH_HMT is not set
 
 #
 # Processor Type
@@ -196,7 +273,7 @@ CONFIG_CPU_V6=y
 CONFIG_CPU_32v6K=y
 CONFIG_CPU_32v6=y
 CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_V6=y
 CONFIG_CPU_CACHE_V6=y
 CONFIG_CPU_CACHE_VIPT=y
 CONFIG_CPU_COPY_V6=y
@@ -212,8 +289,10 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_ERRATA_411920 is not set
 CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
 
 #
 # Bus support
@@ -229,13 +308,15 @@ CONFIG_VMSPLIT_3G=y
 # CONFIG_VMSPLIT_2G is not set
 # CONFIG_VMSPLIT_1G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -243,26 +324,28 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+CONFIG_SPLIT_PTLOCK_CPUS=999999
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
 #
 CONFIG_ZBOOT_ROM_TEXT=0
 CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_CMDLINE="console=ttySAC0,115200 root=/dev/ram init=/bin/bash initrd=0x51000000,4M"
+CONFIG_CMDLINE="console=ttySAC0,115200 root=/dev/ram init=/linuxrc initrd=0x51000000,6M ramdisk_size=6144"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 
 #
 # CPU Power Management
 #
+# CONFIG_CPU_FREQ is not set
 # CONFIG_CPU_IDLE is not set
 
 #
@@ -300,6 +383,7 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -314,14 +398,32 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_AD525X_DPOT is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IWMC3200TOP is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -334,6 +436,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
@@ -341,6 +444,7 @@ CONFIG_HAVE_IDE=y
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -357,27 +461,33 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
 # CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
@@ -390,6 +500,7 @@ CONFIG_SERIO=y
 CONFIG_SERIO_SERPORT=y
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -423,16 +534,18 @@ CONFIG_SERIAL_S3C6400=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -443,6 +556,7 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 CONFIG_I2C_S3C2410=y
@@ -463,32 +577,33 @@ CONFIG_I2C_S3C2410=y
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
-CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
 # CONFIG_GPIO_SYSFS is not set
 
 #
+# Memory mapped GPIO expanders:
+#
+
+#
 # I2C GPIO expanders:
 #
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
 # PCI GPIO expanders:
@@ -497,10 +612,19 @@ CONFIG_GPIOLIB=y
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
@@ -509,17 +633,21 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
 # CONFIG_SENSORS_LM75 is not set
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -530,16 +658,24 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
@@ -549,15 +685,14 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -568,28 +703,22 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_T7L66XB is not set
 # CONFIG_MFD_TC6387XB is not set
 # CONFIG_MFD_TC6393XB is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -612,17 +741,15 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-CONFIG_HID_DEBUG=y
 # CONFIG_HIDRAW is not set
 # CONFIG_HID_PID is not set
 
 #
 # Special HID drivers
 #
-# CONFIG_HID_COMPAT is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
+CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB_ARCH_HAS_EHCI is not set
 # CONFIG_USB is not set
 
@@ -631,9 +758,13 @@ CONFIG_USB_ARCH_HAS_HCD=y
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 CONFIG_MMC=y
 CONFIG_MMC_DEBUG=y
 CONFIG_MMC_UNSAFE_RESUME=y
@@ -650,22 +781,24 @@ CONFIG_SDIO_UART=y
 # MMC/SD/SDIO Host Controller Drivers
 #
 CONFIG_MMC_SDHCI=y
+# CONFIG_MMC_SDHCI_PLTFM is not set
 CONFIG_MMC_SDHCI_S3C=y
+# CONFIG_MMC_SDHCI_S3C_DMA is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
 # CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
 
 #
-# Voltage and Current regulators
+# TI VLYNQ
 #
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -674,6 +807,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
@@ -683,9 +817,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -696,6 +833,11 @@ CONFIG_INOTIFY_USER=y
 CONFIG_GENERIC_ACL=y
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -719,10 +861,7 @@ CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -731,12 +870,17 @@ CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 
@@ -755,6 +899,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -763,12 +908,16 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 CONFIG_DEBUG_RT_MUTEXES=y
 CONFIG_DEBUG_PI_LIST=y
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -787,34 +936,43 @@ CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
 # CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
 CONFIG_DEBUG_S3C_UART=0
 
 #
@@ -823,13 +981,19 @@ CONFIG_DEBUG_S3C_UART=0
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 # CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -838,6 +1002,10 @@ CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/s5p6440_defconfig b/arch/arm/configs/s5p6440_defconfig
new file mode 100644
index 000000000000..279a15e53114
--- /dev/null
+++ b/arch/arm/configs/s5p6440_defconfig
@@ -0,0 +1,969 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33-rc2
+# Sat Jan  9 16:33:55 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_NO_IOPORT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+CONFIG_ARCH_S5P6440=y
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+CONFIG_PLAT_SAMSUNG=y
+CONFIG_SAMSUNG_CLKSRC=y
+CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
+CONFIG_SAMSUNG_IRQ_UART=y
+CONFIG_SAMSUNG_GPIO_EXTRA=0
+CONFIG_PLAT_S3C=y
+
+#
+# Boot options
+#
+CONFIG_S3C_BOOT_ERROR_RESET=y
+CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
+
+#
+# Power management
+#
+CONFIG_S3C_LOWLEVEL_UART_PORT=1
+CONFIG_S3C_GPIO_SPACE=0
+CONFIG_S3C_GPIO_TRACK=y
+CONFIG_PLAT_S5P=y
+CONFIG_CPU_S5P6440_INIT=y
+CONFIG_CPU_S5P6440_CLOCK=y
+CONFIG_CPU_S5P6440=y
+CONFIG_MACH_SMDK6440=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_V6=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_V6=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_ERRATA_411920 is not set
+CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=200
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_CONSOLE is not set
+CONFIG_SERIAL_8250_NR_UARTS=3
+CONFIG_SERIAL_8250_RUNTIME_UARTS=3
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_UARTS=4
+# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_S5P6440=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
+CONFIG_DEBUG_S3C_UART=1
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/s5p6442_defconfig b/arch/arm/configs/s5p6442_defconfig
new file mode 100644
index 000000000000..74e20bfc0487
--- /dev/null
+++ b/arch/arm/configs/s5p6442_defconfig
@@ -0,0 +1,883 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33-rc4
+# Mon Jan 25 08:50:28 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_NO_IOPORT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P6440 is not set
+CONFIG_ARCH_S5P6442=y
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+CONFIG_PLAT_SAMSUNG=y
+CONFIG_SAMSUNG_CLKSRC=y
+CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
+CONFIG_SAMSUNG_IRQ_UART=y
+CONFIG_SAMSUNG_GPIOLIB_4BIT=y
+CONFIG_S3C_GPIO_CFG_S3C24XX=y
+CONFIG_S3C_GPIO_CFG_S3C64XX=y
+CONFIG_S3C_GPIO_PULL_UPDOWN=y
+CONFIG_SAMSUNG_GPIO_EXTRA=0
+# CONFIG_S3C_ADC is not set
+
+#
+# Power management
+#
+CONFIG_PLAT_S3C=y
+
+#
+# Boot options
+#
+# CONFIG_S3C_BOOT_ERROR_RESET is not set
+CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
+CONFIG_S3C_LOWLEVEL_UART_PORT=1
+CONFIG_S3C_GPIO_SPACE=0
+CONFIG_S3C_GPIO_TRACK=y
+CONFIG_PLAT_S5P=y
+CONFIG_CPU_S5P6442=y
+CONFIG_MACH_SMDK6442=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_V6=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_V6=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_ERRATA_411920 is not set
+CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=200
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_CONSOLE is not set
+CONFIG_SERIAL_8250_NR_UARTS=3
+CONFIG_SERIAL_8250_RUNTIME_UARTS=3
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_UARTS=3
+# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_S5PV210=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+# CONFIG_MINIX_SUBPARTITION is not set
+CONFIG_SOLARIS_X86_PARTITION=y
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_ARM_UNWIND is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
+CONFIG_DEBUG_S3C_UART=1
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/s5pc110_defconfig b/arch/arm/configs/s5pc110_defconfig
new file mode 100644
index 000000000000..6ea636131ac8
--- /dev/null
+++ b/arch/arm/configs/s5pc110_defconfig
@@ -0,0 +1,894 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33-rc4
+# Wed Feb 24 15:36:54 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_NO_IOPORT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_ARM_L1_CACHE_SHIFT_6=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P6440 is not set
+# CONFIG_ARCH_S5P6442 is not set
+# CONFIG_ARCH_S5PC1XX is not set
+CONFIG_ARCH_S5PV210=y
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+CONFIG_PLAT_SAMSUNG=y
+
+#
+# Boot options
+#
+# CONFIG_S3C_BOOT_ERROR_RESET is not set
+CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
+CONFIG_S3C_LOWLEVEL_UART_PORT=1
+CONFIG_SAMSUNG_CLKSRC=y
+CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
+CONFIG_SAMSUNG_IRQ_UART=y
+CONFIG_SAMSUNG_GPIOLIB_4BIT=y
+CONFIG_S3C_GPIO_CFG_S3C24XX=y
+CONFIG_S3C_GPIO_CFG_S3C64XX=y
+CONFIG_S3C_GPIO_PULL_UPDOWN=y
+CONFIG_SAMSUNG_GPIO_EXTRA=0
+CONFIG_S3C_GPIO_SPACE=0
+CONFIG_S3C_GPIO_TRACK=y
+# CONFIG_S3C_ADC is not set
+
+#
+# Power management
+#
+CONFIG_PLAT_S5P=y
+CONFIG_CPU_S5PV210=y
+# CONFIG_MACH_SMDKV210 is not set
+CONFIG_MACH_SMDKC110=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_VMSPLIT_3G is not set
+CONFIG_VMSPLIT_2G=y
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0x80000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=200
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_CONSOLE is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_UARTS_4=y
+CONFIG_SERIAL_SAMSUNG_UARTS=4
+# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_S5PV210=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+# CONFIG_MINIX_SUBPARTITION is not set
+CONFIG_SOLARIS_X86_PARTITION=y
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_PREEMPT is not set
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
+CONFIG_DEBUG_S3C_UART=1
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/s5pv210_defconfig b/arch/arm/configs/s5pv210_defconfig
new file mode 100644
index 000000000000..3f7d47491b54
--- /dev/null
+++ b/arch/arm/configs/s5pv210_defconfig
@@ -0,0 +1,894 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33-rc4
+# Wed Feb 24 15:36:16 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_NO_IOPORT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_ARM_L1_CACHE_SHIFT_6=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P6440 is not set
+# CONFIG_ARCH_S5P6442 is not set
+# CONFIG_ARCH_S5PC1XX is not set
+CONFIG_ARCH_S5PV210=y
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+CONFIG_PLAT_SAMSUNG=y
+
+#
+# Boot options
+#
+# CONFIG_S3C_BOOT_ERROR_RESET is not set
+CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
+CONFIG_S3C_LOWLEVEL_UART_PORT=1
+CONFIG_SAMSUNG_CLKSRC=y
+CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
+CONFIG_SAMSUNG_IRQ_UART=y
+CONFIG_SAMSUNG_GPIOLIB_4BIT=y
+CONFIG_S3C_GPIO_CFG_S3C24XX=y
+CONFIG_S3C_GPIO_CFG_S3C64XX=y
+CONFIG_S3C_GPIO_PULL_UPDOWN=y
+CONFIG_SAMSUNG_GPIO_EXTRA=0
+CONFIG_S3C_GPIO_SPACE=0
+CONFIG_S3C_GPIO_TRACK=y
+# CONFIG_S3C_ADC is not set
+
+#
+# Power management
+#
+CONFIG_PLAT_S5P=y
+CONFIG_CPU_S5PV210=y
+CONFIG_MACH_SMDKV210=y
+# CONFIG_MACH_SMDKC110 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_VMSPLIT_3G is not set
+CONFIG_VMSPLIT_2G=y
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0x80000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=200
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_CONSOLE is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_UARTS_4=y
+CONFIG_SERIAL_SAMSUNG_UARTS=4
+# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_S5PV210=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+# CONFIG_MINIX_SUBPARTITION is not set
+CONFIG_SOLARIS_X86_PARTITION=y
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_PREEMPT is not set
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
+CONFIG_DEBUG_S3C_UART=1
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index 256ee1c9f51a..69ce0727edb5 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -128,6 +128,14 @@ static inline int dma_supported(struct device *dev, u64 mask)
 
 static inline int dma_set_mask(struct device *dev, u64 dma_mask)
 {
+#ifdef CONFIG_DMABOUNCE
+	if (dev->archdata.dmabounce) {
+		if (dma_mask >= ISA_DMA_THRESHOLD)
+			return 0;
+		else
+			return -EIO;
+	}
+#endif
 	if (!dev->dma_mask || !dma_supported(dev, dma_mask))
 		return -EIO;
 
diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
index a399bb5730f1..bff056489cc1 100644
--- a/arch/arm/include/asm/elf.h
+++ b/arch/arm/include/asm/elf.h
@@ -98,6 +98,7 @@ extern int elf_check_arch(const struct elf32_hdr *);
 extern int arm_elf_read_implies_exec(const struct elf32_hdr *, int);
 #define elf_read_implies_exec(ex,stk) arm_elf_read_implies_exec(&(ex), stk)
 
+struct task_struct;
 int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs);
 #define ELF_CORE_COPY_TASK_REGS dump_task_regs
 
diff --git a/arch/arm/mach-s3c6400/include/mach/entry-macro.S b/arch/arm/include/asm/entry-macro-vic2.S
index fbd90d2cf355..3ceb85e43850 100644
--- a/arch/arm/mach-s3c6400/include/mach/entry-macro.S
+++ b/arch/arm/include/asm/entry-macro-vic2.S
@@ -1,26 +1,39 @@
-/* arch/arm/mach-s3c6400/include/mach/entry-macro.S
+/* arch/arm/include/asm/entry-macro-vic2.S
+ *
+ * Originally arch/arm/mach-s3c6400/include/mach/entry-macro.S
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * Low-level IRQ helper macros for the Samsung S3C64XX series
+ * Low-level IRQ helper macros for a device with two VICs
  *
  * This file is licensed under  the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
 */
 
+/* This should be included from <mach/entry-macro.S> with the necessary
+ * defines for virtual addresses and IRQ bases for the two vics.
+ *
+ * The code needs the following defined:
+ *	IRQ_VIC0_BASE	IRQ number of VIC0's first IRQ
+ *	IRQ_VIC1_BASE	IRQ number of VIC1's first IRQ
+ *	VA_VIC0		Virtual address of VIC0
+ *	VA_VIC1		Virtual address of VIC1
+ *
+ * Note, code assumes VIC0's virtual address is an ARM immediate constant
+ * away from VIC1.
+*/
+
 #include <asm/hardware/vic.h>
-#include <mach/map.h>
-#include <plat/irqs.h>
 
 	.macro	disable_fiq
 	.endm
 
 	.macro	get_irqnr_preamble, base, tmp
-	ldr	\base, =S3C_VA_VIC0
+	ldr	\base, =VA_VIC0
 	.endm
 
 	.macro	arch_ret_to_user, tmp1, tmp2
@@ -29,13 +42,13 @@
 	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
 
 	@ check the vic0
-	mov	\irqnr, # S3C_IRQ_OFFSET + 31
+	mov	\irqnr, #IRQ_VIC0_BASE + 31
 	ldr	\irqstat, [ \base, # VIC_IRQ_STATUS ]
 	teq	\irqstat, #0
 
 	@ otherwise try vic1
-	addeq	\tmp, \base, #(S3C_VA_VIC1 - S3C_VA_VIC0)
-	addeq	\irqnr, \irqnr, #32
+	addeq	\tmp, \base, #(VA_VIC1 - VA_VIC0)
+	addeq	\irqnr, \irqnr, #(IRQ_VIC1_BASE - IRQ_VIC0_BASE)
 	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
 	teqeq	\irqstat, #0
 
diff --git a/arch/arm/include/asm/hardware/it8152.h b/arch/arm/include/asm/hardware/it8152.h
index 74b5fff7f575..6700c7fc7ebd 100644
--- a/arch/arm/include/asm/hardware/it8152.h
+++ b/arch/arm/include/asm/hardware/it8152.h
@@ -75,6 +75,18 @@ extern unsigned long it8152_base_address;
   IT8152_PD_IRQ(1)  USB (USBR)
   IT8152_PD_IRQ(0)  Audio controller (ACR)
  */
+#define IT8152_IRQ(x)   (IRQ_BOARD_END + (x))
+
+/* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */
+#define IT8152_LD_IRQ_COUNT     9
+#define IT8152_LP_IRQ_COUNT     16
+#define IT8152_PD_IRQ_COUNT     15
+
+/* Priorities: */
+#define IT8152_PD_IRQ(i)        IT8152_IRQ(i)
+#define IT8152_LP_IRQ(i)        (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT)
+#define IT8152_LD_IRQ(i)        (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT + IT8152_LP_IRQ_COUNT)
+
 /* frequently used interrupts */
 #define IT8152_PCISERR		IT8152_PD_IRQ(14)
 #define IT8152_H2PTADR		IT8152_PD_IRQ(13)
diff --git a/arch/arm/include/asm/hardware/locomo.h b/arch/arm/include/asm/hardware/locomo.h
index 954b1be991b4..74e51d6bd93f 100644
--- a/arch/arm/include/asm/hardware/locomo.h
+++ b/arch/arm/include/asm/hardware/locomo.h
@@ -214,4 +214,8 @@ void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int
 /* Frontlight control */
 void locomo_frontlight_set(struct locomo_dev *dev, int duty, int vr, int bpwf);
 
+struct locomo_platform_data {
+	int	irq_base;	/* IRQ base for cascaded on-chip IRQs */
+};
+
 #endif
diff --git a/arch/arm/include/asm/hardware/sa1111.h b/arch/arm/include/asm/hardware/sa1111.h
index 5da2595759e5..92ed254c175b 100644
--- a/arch/arm/include/asm/hardware/sa1111.h
+++ b/arch/arm/include/asm/hardware/sa1111.h
@@ -578,4 +578,8 @@ void sa1111_set_io_dir(struct sa1111_dev *sadev, unsigned int bits, unsigned int
 void sa1111_set_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v);
 void sa1111_set_sleep_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v);
 
+struct sa1111_platform_data {
+	int	irq_base;	/* base for cascaded on-chip IRQs */
+};
+
 #endif  /* _ASM_ARCH_SA1111 */
diff --git a/arch/arm/include/asm/pci.h b/arch/arm/include/asm/pci.h
index 226cddd2fb65..47980118d0a5 100644
--- a/arch/arm/include/asm/pci.h
+++ b/arch/arm/include/asm/pci.h
@@ -30,17 +30,6 @@ static inline void pcibios_penalize_isa_irq(int irq, int active)
  */
 #define PCI_DMA_BUS_IS_PHYS     (1)
 
-/*
- * Whether pci_unmap_{single,page} is a nop depends upon the
- * configuration.
- */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	dma_addr_t ADDR_NAME;
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		__u32 LEN_NAME;
-#define pci_unmap_addr(PTR, ADDR_NAME)		((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	(((PTR)->ADDR_NAME) = (VAL))
-#define pci_unmap_len(PTR, LEN_NAME)		((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	(((PTR)->LEN_NAME) = (VAL))
-
 #ifdef CONFIG_PCI
 static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 					enum pci_dma_burst_strategy *strat,
diff --git a/arch/arm/include/asm/pgtable-nommu.h b/arch/arm/include/asm/pgtable-nommu.h
index 013cfcdc4839..ffc0e85775b4 100644
--- a/arch/arm/include/asm/pgtable-nommu.h
+++ b/arch/arm/include/asm/pgtable-nommu.h
@@ -67,6 +67,7 @@ static inline int pte_file(pte_t pte) { return 0; }
  */
 #define pgprot_noncached(prot)	__pgprot(0)
 #define pgprot_writecombine(prot) __pgprot(0)
+#define pgprot_dmacoherent(prot) __pgprot(0)
 
 
 /*
diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h
index eec6e897ceb2..9dcb11e59026 100644
--- a/arch/arm/include/asm/ptrace.h
+++ b/arch/arm/include/asm/ptrace.h
@@ -128,6 +128,8 @@ struct pt_regs {
 
 #ifdef __KERNEL__
 
+#define arch_has_single_step()	(1)
+
 #define user_mode(regs)	\
 	(((regs)->ARM_cpsr & 0xf) == 0)
 
diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h
index cf9cdaa2d4d4..dd2bf53000fe 100644
--- a/arch/arm/include/asm/unistd.h
+++ b/arch/arm/include/asm/unistd.h
@@ -443,9 +443,12 @@
 #define __ARCH_WANT_SYS_SIGPROCMASK
 #define __ARCH_WANT_SYS_RT_SIGACTION
 #define __ARCH_WANT_SYS_RT_SIGSUSPEND
+#define __ARCH_WANT_SYS_OLD_MMAP
+#define __ARCH_WANT_SYS_OLD_SELECT
 
 #if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT)
 #define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_IPC
 #define __ARCH_WANT_SYS_OLDUMOUNT
 #define __ARCH_WANT_SYS_ALARM
 #define __ARCH_WANT_SYS_UTIME
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index 9314a2d681f1..37ae301cc47c 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -91,7 +91,7 @@
 		CALL(sys_settimeofday)
 /* 80 */	CALL(sys_getgroups16)
 		CALL(sys_setgroups16)
-		CALL(OBSOLETE(old_select))	/* used by libc4 */
+		CALL(OBSOLETE(sys_old_select))	/* used by libc4 */
 		CALL(sys_symlink)
 		CALL(sys_ni_syscall)		/* was sys_lstat */
 /* 85 */	CALL(sys_readlink)
@@ -99,7 +99,7 @@
 		CALL(sys_swapon)
 		CALL(sys_reboot)
 		CALL(OBSOLETE(sys_old_readdir))	/* used by libc4 */
-/* 90 */	CALL(OBSOLETE(old_mmap))	/* used by libc4 */
+/* 90 */	CALL(OBSOLETE(sys_old_mmap))	/* used by libc4 */
 		CALL(sys_munmap)
 		CALL(sys_truncate)
 		CALL(sys_ftruncate)
diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S
index 7e9ed1eea40a..d93f976fb389 100644
--- a/arch/arm/kernel/entry-header.S
+++ b/arch/arm/kernel/entry-header.S
@@ -102,6 +102,8 @@
 	.else
 	ldmdb	sp, {r0 - lr}^			@ get calling r0 - lr
 	.endif
+	mov	r0, r0				@ ARMv5T and earlier require a nop
+						@ after ldm {}^
 	add	sp, sp, #S_FRAME_SIZE - S_PC
 	movs	pc, lr				@ return & move spsr_svc into cpsr
 	.endm
diff --git a/arch/arm/kernel/kgdb.c b/arch/arm/kernel/kgdb.c
index ba8ccfede964..a5b846b9895d 100644
--- a/arch/arm/kernel/kgdb.c
+++ b/arch/arm/kernel/kgdb.c
@@ -9,6 +9,7 @@
  * Authors:  George Davis <davis_g@mvista.com>
  *           Deepak Saxena <dsaxena@plexity.net>
  */
+#include <linux/irq.h>
 #include <linux/kgdb.h>
 #include <asm/traps.h>
 
@@ -158,6 +159,18 @@ static struct undef_hook kgdb_compiled_brkpt_hook = {
 	.fn			= kgdb_compiled_brk_fn
 };
 
+static void kgdb_call_nmi_hook(void *ignored)
+{
+       kgdb_nmicallback(raw_smp_processor_id(), get_irq_regs());
+}
+
+void kgdb_roundup_cpus(unsigned long flags)
+{
+       local_irq_enable();
+       smp_call_function(kgdb_call_nmi_hook, NULL, 0);
+       local_irq_disable();
+}
+
 /**
  *	kgdb_arch_init - Perform any architecture specific initalization.
  *
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index c54ceb3d1f97..9e70f2053f9a 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -332,7 +332,8 @@ armpmu_reserve_hardware(void)
 
 	for (i = 0; i < pmu_irqs->num_irqs; ++i) {
 		err = request_irq(pmu_irqs->irqs[i], armpmu->handle_irq,
-				  IRQF_DISABLED, "armpmu", NULL);
+				  IRQF_DISABLED | IRQF_NOBALANCING,
+				  "armpmu", NULL);
 		if (err) {
 			pr_warning("unable to request IRQ%d for ARM "
 				   "perf counters\n", pmu_irqs->irqs[i]);
@@ -965,7 +966,7 @@ armv6pmu_handle_irq(int irq_num,
 	 */
 	armv6_pmcr_write(pmcr);
 
-	data.addr = 0;
+	perf_sample_data_init(&data, 0);
 
 	cpuc = &__get_cpu_var(cpu_hw_events);
 	for (idx = 0; idx <= armpmu->num_events; ++idx) {
@@ -1624,7 +1625,7 @@ enum armv7_counters {
 /*
  * EVTSEL: Event selection reg
  */
-#define	ARMV7_EVTSEL_MASK	0x7f		/* Mask for writable bits */
+#define	ARMV7_EVTSEL_MASK	0xff		/* Mask for writable bits */
 
 /*
  * SELECT: Counter selection reg
@@ -1945,7 +1946,7 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
 	 */
 	regs = get_irq_regs();
 
-	data.addr = 0;
+	perf_sample_data_init(&data, 0);
 
 	cpuc = &__get_cpu_var(cpu_hw_events);
 	for (idx = 0; idx <= armpmu->num_events; ++idx) {
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index 08f899fb76a6..3f562a7c0a99 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -452,12 +452,23 @@ void ptrace_cancel_bpt(struct task_struct *child)
 		clear_breakpoint(child, &child->thread.debug.bp[i]);
 }
 
+void user_disable_single_step(struct task_struct *task)
+{
+	task->ptrace &= ~PT_SINGLESTEP;
+	ptrace_cancel_bpt(task);
+}
+
+void user_enable_single_step(struct task_struct *task)
+{
+	task->ptrace |= PT_SINGLESTEP;
+}
+
 /*
  * Called by kernel/ptrace.c when detaching..
  */
 void ptrace_disable(struct task_struct *child)
 {
-	single_step_disable(child);
+	user_disable_single_step(child);
 }
 
 /*
@@ -753,53 +764,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 			ret = ptrace_write_user(child, addr, data);
 			break;
 
-		/*
-		 * continue/restart and stop at next (return from) syscall
-		 */
-		case PTRACE_SYSCALL:
-		case PTRACE_CONT:
-			ret = -EIO;
-			if (!valid_signal(data))
-				break;
-			if (request == PTRACE_SYSCALL)
-				set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-			else
-				clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-			child->exit_code = data;
-			single_step_disable(child);
-			wake_up_process(child);
-			ret = 0;
-			break;
-
-		/*
-		 * make the child exit.  Best I can do is send it a sigkill.
-		 * perhaps it should be put in the status that it wants to
-		 * exit.
-		 */
-		case PTRACE_KILL:
-			single_step_disable(child);
-			if (child->exit_state != EXIT_ZOMBIE) {
-				child->exit_code = SIGKILL;
-				wake_up_process(child);
-			}
-			ret = 0;
-			break;
-
-		/*
-		 * execute single instruction.
-		 */
-		case PTRACE_SINGLESTEP:
-			ret = -EIO;
-			if (!valid_signal(data))
-				break;
-			single_step_enable(child);
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-			child->exit_code = data;
-			/* give it a chance to run. */
-			wake_up_process(child);
-			ret = 0;
-			break;
-
 		case PTRACE_GETREGS:
 			ret = ptrace_getregs(child, (void __user *)data);
 			break;
diff --git a/arch/arm/kernel/ptrace.h b/arch/arm/kernel/ptrace.h
index def3b6184a79..3926605b82ea 100644
--- a/arch/arm/kernel/ptrace.h
+++ b/arch/arm/kernel/ptrace.h
@@ -14,20 +14,6 @@ extern void ptrace_set_bpt(struct task_struct *);
 extern void ptrace_break(struct task_struct *, struct pt_regs *);
 
 /*
- * make sure single-step breakpoint is gone.
- */
-static inline void single_step_disable(struct task_struct *task)
-{
-	task->ptrace &= ~PT_SINGLESTEP;
-	ptrace_cancel_bpt(task);
-}
-
-static inline void single_step_enable(struct task_struct *task)
-{
-	task->ptrace |= PT_SINGLESTEP;
-}
-
-/*
  * Send SIGTRAP if we're single-stepping
  */
 static inline void single_step_trap(struct task_struct *task)
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 57162af53dc9..577543f3857f 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -99,6 +99,7 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	*pmd = __pmd((PHYS_OFFSET & PGDIR_MASK) |
 		     PMD_TYPE_SECT | PMD_SECT_AP_WRITE);
 	flush_pmd_entry(pmd);
+	outer_clean_range(__pa(pmd), __pa(pmd + 1));
 
 	/*
 	 * We need to tell the secondary core where to find
@@ -106,7 +107,8 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	 */
 	secondary_data.stack = task_stack_page(idle) + THREAD_START_SP;
 	secondary_data.pgdir = virt_to_phys(pgd);
-	wmb();
+	__cpuc_flush_dcache_area(&secondary_data, sizeof(secondary_data));
+	outer_clean_range(__pa(&secondary_data), __pa(&secondary_data + 1));
 
 	/*
 	 * Now bring the CPU into our world.
diff --git a/arch/arm/kernel/sys_arm.c b/arch/arm/kernel/sys_arm.c
index ae4027bd01bd..4350f75e578c 100644
--- a/arch/arm/kernel/sys_arm.c
+++ b/arch/arm/kernel/sys_arm.c
@@ -28,135 +28,6 @@
 #include <linux/ipc.h>
 #include <linux/uaccess.h>
 
-struct mmap_arg_struct {
-	unsigned long addr;
-	unsigned long len;
-	unsigned long prot;
-	unsigned long flags;
-	unsigned long fd;
-	unsigned long offset;
-};
-
-asmlinkage int old_mmap(struct mmap_arg_struct __user *arg)
-{
-	int error = -EFAULT;
-	struct mmap_arg_struct a;
-
-	if (copy_from_user(&a, arg, sizeof(a)))
-		goto out;
-
-	error = -EINVAL;
-	if (a.offset & ~PAGE_MASK)
-		goto out;
-
-	error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, a.offset >> PAGE_SHIFT);
-out:
-	return error;
-}
-
-/*
- * Perform the select(nd, in, out, ex, tv) and mmap() system
- * calls.
- */
-
-struct sel_arg_struct {
-	unsigned long n;
-	fd_set __user *inp, *outp, *exp;
-	struct timeval __user *tvp;
-};
-
-asmlinkage int old_select(struct sel_arg_struct __user *arg)
-{
-	struct sel_arg_struct a;
-
-	if (copy_from_user(&a, arg, sizeof(a)))
-		return -EFAULT;
-	/* sys_select() does the appropriate kernel locking */
-	return sys_select(a.n, a.inp, a.outp, a.exp, a.tvp);
-}
-
-#if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT)
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly.
- */
-asmlinkage int sys_ipc(uint call, int first, int second, int third,
-		       void __user *ptr, long fifth)
-{
-	int version, ret;
-
-	version = call >> 16; /* hack for backward compatibility */
-	call &= 0xffff;
-
-	switch (call) {
-	case SEMOP:
-		return sys_semtimedop (first, (struct sembuf __user *)ptr, second, NULL);
-	case SEMTIMEDOP:
-		return sys_semtimedop(first, (struct sembuf __user *)ptr, second,
-					(const struct timespec __user *)fifth);
-
-	case SEMGET:
-		return sys_semget (first, second, third);
-	case SEMCTL: {
-		union semun fourth;
-		if (!ptr)
-			return -EINVAL;
-		if (get_user(fourth.__pad, (void __user * __user *) ptr))
-			return -EFAULT;
-		return sys_semctl (first, second, third, fourth);
-	}
-
-	case MSGSND:
-		return sys_msgsnd(first, (struct msgbuf __user *) ptr, 
-				  second, third);
-	case MSGRCV:
-		switch (version) {
-		case 0: {
-			struct ipc_kludge tmp;
-			if (!ptr)
-				return -EINVAL;
-			if (copy_from_user(&tmp,(struct ipc_kludge __user *)ptr,
-					   sizeof (tmp)))
-				return -EFAULT;
-			return sys_msgrcv (first, tmp.msgp, second,
-					   tmp.msgtyp, third);
-		}
-		default:
-			return sys_msgrcv (first,
-					   (struct msgbuf __user *) ptr,
-					   second, fifth, third);
-		}
-	case MSGGET:
-		return sys_msgget ((key_t) first, second);
-	case MSGCTL:
-		return sys_msgctl(first, second, (struct msqid_ds __user *)ptr);
-
-	case SHMAT:
-		switch (version) {
-		default: {
-			ulong raddr;
-			ret = do_shmat(first, (char __user *)ptr, second, &raddr);
-			if (ret)
-				return ret;
-			return put_user(raddr, (ulong __user *)third);
-		}
-		case 1: /* Of course, we don't support iBCS2! */
-			return -EINVAL;
-		}
-	case SHMDT: 
-		return sys_shmdt ((char __user *)ptr);
-	case SHMGET:
-		return sys_shmget (first, second, third);
-	case SHMCTL:
-		return sys_shmctl (first, second,
-				   (struct shmid_ds __user *) ptr);
-	default:
-		return -ENOSYS;
-	}
-}
-#endif
-
 /* Fork a new task - this creates a new program thread.
  * This is called indirectly via a small wrapper
  */
diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c
index d59a0cd537f0..33ff678e32f2 100644
--- a/arch/arm/kernel/sys_oabi-compat.c
+++ b/arch/arm/kernel/sys_oabi-compat.c
@@ -346,9 +346,6 @@ asmlinkage long sys_oabi_semop(int semid, struct oabi_sembuf __user *tsops,
 	return sys_oabi_semtimedop(semid, tsops, nsops, NULL);
 }
 
-extern asmlinkage int sys_ipc(uint call, int first, int second, int third,
-			      void __user *ptr, long fifth);
-
 asmlinkage int sys_oabi_ipc(uint call, int first, int second, int third,
 			    void __user *ptr, long fifth)
 {
diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c
index 786ac2b6914a..50292cd9c120 100644
--- a/arch/arm/kernel/unwind.c
+++ b/arch/arm/kernel/unwind.c
@@ -359,7 +359,9 @@ void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk)
 		frame.fp = regs->ARM_fp;
 		frame.sp = regs->ARM_sp;
 		frame.lr = regs->ARM_lr;
-		frame.pc = regs->ARM_pc;
+		/* PC might be corrupted, use LR in that case. */
+		frame.pc = kernel_text_address(regs->ARM_pc)
+			 ? regs->ARM_pc : regs->ARM_lr;
 	} else if (tsk == current) {
 		frame.fp = (unsigned long)__builtin_frame_address(0);
 		frame.sp = current_sp;
diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c
index 309f3511aa20..2500f41d8d2d 100644
--- a/arch/arm/mach-at91/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -58,6 +58,12 @@ static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id)
 {
 	u32	sr = at91_sys_read(AT91_ST_SR) & irqmask;
 
+	/*
+	 * irqs should be disabled here, but as the irq is shared they are only
+	 * guaranteed to be off if the timer irq is registered first.
+	 */
+	WARN_ON_ONCE(!irqs_disabled());
+
 	/* simulate "oneshot" timer with alarm */
 	if (sr & AT91_ST_ALMS) {
 		clkevt.event_handler(&clkevt);
@@ -132,24 +138,11 @@ clkevt32k_mode(enum clock_event_mode mode, struct clock_event_device *dev)
 static int
 clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev)
 {
-	unsigned long	flags;
 	u32		alm;
 	int		status = 0;
 
 	BUG_ON(delta < 2);
 
-	/* Use "raw" primitives so we behave correctly on RT kernels. */
-	raw_local_irq_save(flags);
-
-	/*
-	 * According to Thomas Gleixner irqs are already disabled here.  Simply
-	 * removing raw_local_irq_save above (and the matching
-	 * raw_local_irq_restore) was not accepted.  See
-	 * http://thread.gmane.org/gmane.linux.ports.arm.kernel/41174
-	 * So for now (2008-11-20) just warn once if irqs were not disabled ...
-	 */
-	WARN_ON_ONCE(!raw_irqs_disabled_flags(flags));
-
 	/* The alarm IRQ uses absolute time (now+delta), not the relative
 	 * time (delta) in our calling convention.  Like all clockevents
 	 * using such "match" hardware, we have a race to defend against.
@@ -169,7 +162,6 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev)
 	alm += delta;
 	at91_sys_write(AT91_ST_RTAR, alm);
 
-	raw_local_irq_restore(flags);
 	return status;
 }
 
diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
index 4bd56aee4370..608a63240b64 100644
--- a/arch/arm/mach-at91/at91sam926x_time.c
+++ b/arch/arm/mach-at91/at91sam926x_time.c
@@ -62,16 +62,12 @@ static struct clocksource pit_clk = {
 static void
 pit_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev)
 {
-	unsigned long	flags;
-
 	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
-		/* update clocksource counter, then enable the IRQ */
-		raw_local_irq_save(flags);
+		/* update clocksource counter */
 		pit_cnt += pit_cycle * PIT_PICNT(at91_sys_read(AT91_PIT_PIVR));
 		at91_sys_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN
 				| AT91_PIT_PITIEN);
-		raw_local_irq_restore(flags);
 		break;
 	case CLOCK_EVT_MODE_ONESHOT:
 		BUG();
@@ -100,6 +96,11 @@ static struct clock_event_device pit_clkevt = {
  */
 static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id)
 {
+	/*
+	 * irqs should be disabled here, but as the irq is shared they are only
+	 * guaranteed to be off if the timer irq is registered first.
+	 */
+	WARN_ON_ONCE(!irqs_disabled());
 
 	/* The PIT interrupt may be disabled, and is shared */
 	if ((pit_clkevt.mode == CLOCK_EVT_MODE_PERIODIC)
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 29cf83177484..c11fd47aec5d 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -271,10 +271,12 @@ static void __init ek_add_device_buttons(void) {}
 
 
 static struct i2c_board_info __initdata ek_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("24c512", 0x50),
-		I2C_BOARD_INFO("wm8731", 0x1b),
-	},
+        {
+                I2C_BOARD_INFO("24c512", 0x50)
+        },
+        {
+                I2C_BOARD_INFO("wm8731", 0x1b)
+        },
 };
 
 
diff --git a/arch/arm/mach-at91/include/mach/at91_mci.h b/arch/arm/mach-at91/include/mach/at91_mci.h
index 550d503a1bca..57f8ee154943 100644
--- a/arch/arm/mach-at91/include/mach/at91_mci.h
+++ b/arch/arm/mach-at91/include/mach/at91_mci.h
@@ -77,7 +77,7 @@
 
 #define AT91_MCI_BLKR		0x18		/* Block Register */
 #define		AT91_MCI_BLKR_BCNT(n)	((0xffff & (n)) << 0)	/* Block count */
-#define		AT91_MCI_BLKR_BLKLEN(n)	((0xffff & (n)) << 16)	/* Block lenght */
+#define		AT91_MCI_BLKR_BLKLEN(n)	((0xffff & (n)) << 16)	/* Block length */
 
 #define AT91_MCI_RSPR(n)	(0x20 + ((n) * 4))	/* Response Registers 0-3 */
 #define AT91_MCR_RDR		0x30		/* Receive Data Register */
diff --git a/arch/arm/mach-davinci/include/mach/i2c.h b/arch/arm/mach-davinci/include/mach/i2c.h
index 39fdceac8414..2312d197dfb7 100644
--- a/arch/arm/mach-davinci/include/mach/i2c.h
+++ b/arch/arm/mach-davinci/include/mach/i2c.h
@@ -1,5 +1,5 @@
 /*
- * DaVinci I2C controller platfrom_device info
+ * DaVinci I2C controller platform_device info
  *
  * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
  *
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index 806972a68c87..5da2cf402c81 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -605,7 +605,7 @@ static struct platform_device dove_xor00_channel = {
 	.dev		= {
 		.dma_mask		= &dove_xor0_dmamask,
 		.coherent_dma_mask	= DMA_BIT_MASK(64),
-		.platform_data		= (void *)&dove_xor00_data,
+		.platform_data		= &dove_xor00_data,
 	},
 };
 
@@ -631,7 +631,7 @@ static struct platform_device dove_xor01_channel = {
 	.dev		= {
 		.dma_mask		= &dove_xor0_dmamask,
 		.coherent_dma_mask	= DMA_BIT_MASK(64),
-		.platform_data		= (void *)&dove_xor01_data,
+		.platform_data		= &dove_xor01_data,
 	},
 };
 
@@ -704,7 +704,7 @@ static struct platform_device dove_xor10_channel = {
 	.dev		= {
 		.dma_mask		= &dove_xor1_dmamask,
 		.coherent_dma_mask	= DMA_BIT_MASK(64),
-		.platform_data		= (void *)&dove_xor10_data,
+		.platform_data		= &dove_xor10_data,
 	},
 };
 
@@ -730,7 +730,7 @@ static struct platform_device dove_xor11_channel = {
 	.dev		= {
 		.dma_mask		= &dove_xor1_dmamask,
 		.coherent_dma_mask	= DMA_BIT_MASK(64),
-		.platform_data		= (void *)&dove_xor11_data,
+		.platform_data		= &dove_xor11_data,
 	},
 };
 
diff --git a/arch/arm/mach-ep93xx/include/mach/ts72xx.h b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
index 3bd934e9a7f1..93107d88ff3a 100644
--- a/arch/arm/mach-ep93xx/include/mach/ts72xx.h
+++ b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
@@ -65,6 +65,8 @@
 #define TS72XX_RTC_DATA_PHYS_BASE	0x11700000
 #define TS72XX_RTC_DATA_SIZE		0x00001000
 
+#define TS72XX_WDT_CONTROL_PHYS_BASE	0x23800000
+#define TS72XX_WDT_FEED_PHYS_BASE	0x23c00000
 
 #ifndef __ASSEMBLY__
 
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index f3757a1c5a10..c33360e82868 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -28,7 +28,7 @@
  *
  * Micro9-High has up to 64MB of 32-bit flash on CS1
  * Micro9-Mid has up to 64MB of either 32-bit or 16-bit flash on CS1
- * Micro9-Lite uses a seperate MTD map driver for flash support
+ * Micro9-Lite uses a separate MTD map driver for flash support
  * Micro9-Slim has up to 64MB of either 32-bit or 16-bit flash on CS1
  *************************************************************************/
 static struct physmap_flash_data micro9_flash_data;
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index 259f7822ba52..fac1ec7a60fb 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -166,6 +166,26 @@ static struct platform_device ts72xx_rtc_device = {
 	.num_resources	= 0,
 };
 
+static struct resource ts72xx_wdt_resources[] = {
+	{
+		.start	= TS72XX_WDT_CONTROL_PHYS_BASE,
+		.end	= TS72XX_WDT_CONTROL_PHYS_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= TS72XX_WDT_FEED_PHYS_BASE,
+		.end	= TS72XX_WDT_FEED_PHYS_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device ts72xx_wdt_device = {
+	.name		= "ts72xx-wdt",
+	.id		= -1,
+	.num_resources 	= ARRAY_SIZE(ts72xx_wdt_resources),
+	.resource	= ts72xx_wdt_resources,
+};
+
 static struct ep93xx_eth_data ts72xx_eth_data = {
 	.phy_id		= 1,
 };
@@ -175,6 +195,7 @@ static void __init ts72xx_init_machine(void)
 	ep93xx_init_devices();
 	ts72xx_register_flash();
 	platform_device_register(&ts72xx_rtc_device);
+	platform_device_register(&ts72xx_wdt_device);
 
 	ep93xx_register_eth(&ts72xx_eth_data, 1);
 }
diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
index c4a01594c761..e3181534c7f9 100644
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ b/arch/arm/mach-ixp4xx/common-pci.c
@@ -502,32 +502,6 @@ struct pci_bus * __devinit ixp4xx_scan_bus(int nr, struct pci_sys_data *sys)
 	return pci_scan_bus(sys->busnr, &ixp4xx_ops, sys);
 }
 
-/*
- * We override these so we properly do dmabounce otherwise drivers
- * are able to set the dma_mask to 0xffffffff and we can no longer
- * trap bounces. :(
- *
- * We just return true on everyhing except for < 64MB in which case 
- * we will fail miseralby and die since we can't handle that case.
- */
-int
-pci_set_dma_mask(struct pci_dev *dev, u64 mask)
-{
-	if (mask >= SZ_64M - 1 )
-		return 0;
-
-	return -EIO;
-}
-    
-int
-pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
-{
-	if (mask >= SZ_64M - 1 )
-		return 0;
-
-	return -EIO;
-}
-
 EXPORT_SYMBOL(ixp4xx_pci_read);
 EXPORT_SYMBOL(ixp4xx_pci_write);
 
diff --git a/arch/arm/mach-ixp4xx/include/mach/hardware.h b/arch/arm/mach-ixp4xx/include/mach/hardware.h
index f9d1c43e4a54..f91ca6d4fbe8 100644
--- a/arch/arm/mach-ixp4xx/include/mach/hardware.h
+++ b/arch/arm/mach-ixp4xx/include/mach/hardware.h
@@ -26,11 +26,6 @@
 #define PCIBIOS_MAX_MEM		0x4BFFFFFF
 #endif
 
-/*
- * We override the standard dma-mask routines for bouncing.
- */
-#define	HAVE_ARCH_PCI_SET_DMA_MASK
-
 #define pcibios_assign_all_busses()	1
 
 /* Register locations and bits */
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index f6c6196a51fa..17879a876be6 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -32,6 +32,12 @@ config MACH_SHEEVAPLUG
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell SheevaPlug Reference Board.
 
+config MACH_ESATA_SHEEVAPLUG
+	bool "Marvell eSATA SheevaPlug Reference Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell eSATA SheevaPlug Reference Board.
+
 config MACH_TS219
 	bool "QNAP TS-110, TS-119, TS-210, TS-219 and TS-219P Turbo NAS"
 	help
@@ -46,18 +52,35 @@ config MACH_TS41X
 	  QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS
 	  devices.
 
+config MACH_OPENRD
+        bool
+
 config MACH_OPENRD_BASE
 	bool "Marvell OpenRD Base Board"
+	select MACH_OPENRD
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell OpenRD Base Board.
 
+config MACH_OPENRD_CLIENT
+	bool "Marvell OpenRD Client Board"
+	select MACH_OPENRD
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell OpenRD Client Board.
+
 config MACH_NETSPACE_V2
 	bool "LaCie Network Space v2 NAS Board"
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  LaCie Network Space v2 NAS.
 
+config MACH_INETSPACE_V2
+	bool "LaCie Internet Space v2 NAS Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  LaCie Internet Space v2 NAS.
+
 endmenu
 
 endif
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index d4d7f53b0fb9..a5530e36ba3e 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -5,9 +5,11 @@ obj-$(CONFIG_MACH_RD88F6192_NAS)	+= rd88f6192-nas-setup.o
 obj-$(CONFIG_MACH_RD88F6281)		+= rd88f6281-setup.o
 obj-$(CONFIG_MACH_MV88F6281GTW_GE)	+= mv88f6281gtw_ge-setup.o
 obj-$(CONFIG_MACH_SHEEVAPLUG)		+= sheevaplug-setup.o
+obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG)	+= sheevaplug-setup.o
 obj-$(CONFIG_MACH_TS219)		+= ts219-setup.o tsx1x-common.o
 obj-$(CONFIG_MACH_TS41X)		+= ts41x-setup.o tsx1x-common.o
-obj-$(CONFIG_MACH_OPENRD_BASE)		+= openrd_base-setup.o
+obj-$(CONFIG_MACH_OPENRD)		+= openrd-setup.o
 obj-$(CONFIG_MACH_NETSPACE_V2)		+= netspace_v2-setup.o
+obj-$(CONFIG_MACH_INETSPACE_V2)		+= netspace_v2-setup.o
 
 obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 242dd0775343..f759ca243925 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -656,7 +656,7 @@ static struct platform_device kirkwood_xor00_channel = {
 	.dev		= {
 		.dma_mask		= &kirkwood_xor_dmamask,
 		.coherent_dma_mask	= DMA_BIT_MASK(64),
-		.platform_data		= (void *)&kirkwood_xor00_data,
+		.platform_data		= &kirkwood_xor00_data,
 	},
 };
 
@@ -682,7 +682,7 @@ static struct platform_device kirkwood_xor01_channel = {
 	.dev		= {
 		.dma_mask		= &kirkwood_xor_dmamask,
 		.coherent_dma_mask	= DMA_BIT_MASK(64),
-		.platform_data		= (void *)&kirkwood_xor01_data,
+		.platform_data		= &kirkwood_xor01_data,
 	},
 };
 
@@ -755,7 +755,7 @@ static struct platform_device kirkwood_xor10_channel = {
 	.dev		= {
 		.dma_mask		= &kirkwood_xor_dmamask,
 		.coherent_dma_mask	= DMA_BIT_MASK(64),
-		.platform_data		= (void *)&kirkwood_xor10_data,
+		.platform_data		= &kirkwood_xor10_data,
 	},
 };
 
@@ -781,7 +781,7 @@ static struct platform_device kirkwood_xor11_channel = {
 	.dev		= {
 		.dma_mask		= &kirkwood_xor_dmamask,
 		.coherent_dma_mask	= DMA_BIT_MASK(64),
-		.platform_data		= (void *)&kirkwood_xor11_data,
+		.platform_data		= &kirkwood_xor11_data,
 	},
 };
 
diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c
index 9a064065bebe..3ae158d72681 100644
--- a/arch/arm/mach-kirkwood/netspace_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c
@@ -182,8 +182,14 @@ static struct platform_device netspace_v2_gpio_buttons = {
 
 static struct gpio_led netspace_v2_gpio_led_pins[] = {
 	{
-		.name	= "ns_v2:red:fail",
-		.gpio	= NETSPACE_V2_GPIO_RED_LED,
+		.name			= "ns_v2:blue:sata",
+		.default_trigger	= "default-on",
+		.gpio			= NETSPACE_V2_GPIO_BLUE_LED_CMD,
+		.active_low		= 1,
+	},
+	{
+		.name			= "ns_v2:red:fail",
+		.gpio			= NETSPACE_V2_GPIO_RED_LED,
 	},
 };
 
@@ -202,30 +208,19 @@ static struct platform_device netspace_v2_gpio_leds = {
 
 static void __init netspace_v2_gpio_leds_init(void)
 {
-	platform_device_register(&netspace_v2_gpio_leds);
+	int err;
 
-	/*
-	 * Configure the front blue LED to blink in relation with the SATA
-	 * activity.
-	 */
-	if (gpio_request(NETSPACE_V2_GPIO_BLUE_LED_SLOW,
-			 "SATA blue LED slow") != 0)
-		return;
-	if (gpio_direction_output(NETSPACE_V2_GPIO_BLUE_LED_SLOW, 0) != 0)
-		goto err_free_1;
-	if (gpio_request(NETSPACE_V2_GPIO_BLUE_LED_CMD,
-			 "SATA blue LED command") != 0)
-		goto err_free_1;
-	if (gpio_direction_output(NETSPACE_V2_GPIO_BLUE_LED_CMD, 0) != 0)
-		goto err_free_2;
-
-	return;
-
-err_free_2:
-	gpio_free(NETSPACE_V2_GPIO_BLUE_LED_CMD);
-err_free_1:
-	gpio_free(NETSPACE_V2_GPIO_BLUE_LED_SLOW);
-	pr_err("netspace_v2: failed to configure SATA blue LED\n");
+	/* Configure register slow_led to allow SATA activity LED blinking */
+	err = gpio_request(NETSPACE_V2_GPIO_BLUE_LED_SLOW, "blue LED slow");
+	if (err == 0) {
+		err = gpio_direction_output(NETSPACE_V2_GPIO_BLUE_LED_SLOW, 0);
+		if (err)
+			gpio_free(NETSPACE_V2_GPIO_BLUE_LED_SLOW);
+	}
+	if (err)
+		pr_err("netspace_v2: failed to configure blue LED slow GPIO\n");
+
+	platform_device_register(&netspace_v2_gpio_leds);
 }
 
 /*****************************************************************************
@@ -314,6 +309,7 @@ static void __init netspace_v2_init(void)
 		pr_err("netspace_v2: failed to configure power-off GPIO\n");
 }
 
+#ifdef CONFIG_MACH_NETSPACE_V2
 MACHINE_START(NETSPACE_V2, "LaCie Network Space v2")
 	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
 	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
@@ -323,3 +319,16 @@ MACHINE_START(NETSPACE_V2, "LaCie Network Space v2")
 	.init_irq	= kirkwood_init_irq,
 	.timer		= &netspace_v2_timer,
 MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_INETSPACE_V2
+MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2")
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= netspace_v2_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &netspace_v2_timer,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c
new file mode 100644
index 000000000000..ad3f1ec33796
--- /dev/null
+++ b/arch/arm/mach-kirkwood/openrd-setup.c
@@ -0,0 +1,118 @@
+/*
+ * arch/arm/mach-kirkwood/openrd-setup.c
+ *
+ * Marvell OpenRD (Base|Client) Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <plat/mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition openrd_nand_parts[] = {
+	{
+		.name		= "u-boot",
+		.offset		= 0,
+		.size		= SZ_1M,
+		.mask_flags	= MTD_WRITEABLE
+	}, {
+		.name		= "uImage",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= SZ_4M
+	}, {
+		.name		= "root",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= MTDPART_SIZ_FULL
+	},
+};
+
+static struct mv643xx_eth_platform_data openrd_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv643xx_eth_platform_data openrd_ge01_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(24),
+};
+
+static struct mv_sata_platform_data openrd_sata_data = {
+	.n_ports	= 2,
+};
+
+static struct mvsdio_platform_data openrd_mvsdio_data = {
+	.gpio_card_detect = 29,	/* MPP29 used as SD card detect */
+};
+
+static unsigned int openrd_mpp_config[] __initdata = {
+	MPP29_GPIO,
+	0
+};
+
+static void __init openrd_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(openrd_mpp_config);
+
+	kirkwood_uart0_init();
+	kirkwood_nand_init(ARRAY_AND_SIZE(openrd_nand_parts), 25);
+
+	kirkwood_ehci_init();
+
+	kirkwood_ge00_init(&openrd_ge00_data);
+	if (machine_is_openrd_client())
+		kirkwood_ge01_init(&openrd_ge01_data);
+	kirkwood_sata_init(&openrd_sata_data);
+	kirkwood_sdio_init(&openrd_mvsdio_data);
+
+	kirkwood_i2c_init();
+}
+
+static int __init openrd_pci_init(void)
+{
+	if (machine_is_openrd_base() || machine_is_openrd_client())
+		kirkwood_pcie_init();
+
+	return 0;
+}
+subsys_initcall(openrd_pci_init);
+
+#ifdef CONFIG_MACH_OPENRD_BASE
+MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
+	/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= openrd_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_OPENRD_CLIENT
+MACHINE_START(OPENRD_CLIENT, "Marvell OpenRD Client Board")
+	/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= openrd_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-kirkwood/openrd_base-setup.c b/arch/arm/mach-kirkwood/openrd_base-setup.c
deleted file mode 100644
index 77617c722299..000000000000
--- a/arch/arm/mach-kirkwood/openrd_base-setup.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/openrd_base-setup.c
- *
- * Marvell OpenRD Base Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/partitions.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mtd_partition openrd_base_nand_parts[] = {
-	{
-		.name = "u-boot",
-		.offset = 0,
-		.size = SZ_1M
-	}, {
-		.name = "uImage",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = SZ_4M
-	}, {
-		.name = "root",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = MTDPART_SIZ_FULL
-	},
-};
-
-static struct mv643xx_eth_platform_data openrd_base_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv_sata_platform_data openrd_base_sata_data = {
-	.n_ports	= 2,
-};
-
-static struct mvsdio_platform_data openrd_base_mvsdio_data = {
-	.gpio_card_detect = 29,	/* MPP29 used as SD card detect */
-};
-
-static unsigned int openrd_base_mpp_config[] __initdata = {
-	MPP29_GPIO,
-	0
-};
-
-static void __init openrd_base_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_init();
-	kirkwood_mpp_conf(openrd_base_mpp_config);
-
-	kirkwood_uart0_init();
-	kirkwood_nand_init(ARRAY_AND_SIZE(openrd_base_nand_parts), 25);
-
-	kirkwood_ehci_init();
-
-	kirkwood_ge00_init(&openrd_base_ge00_data);
-	kirkwood_sata_init(&openrd_base_sata_data);
-	kirkwood_sdio_init(&openrd_base_mvsdio_data);
-
-	kirkwood_i2c_init();
-}
-
-static int __init openrd_base_pci_init(void)
-{
-	if (machine_is_openrd_base())
-		kirkwood_pcie_init();
-
-	return 0;
- }
-subsys_initcall(openrd_base_pci_init);
-
-
-MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
-	/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
-	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
-	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
-	.boot_params	= 0x00000100,
-	.init_machine	= openrd_base_init,
-	.map_io		= kirkwood_map_io,
-	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
-MACHINE_END
diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
index c7319eeac8bb..a00879d34d54 100644
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
@@ -11,6 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/ata_platform.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/gpio.h>
@@ -42,10 +43,19 @@ static struct mv643xx_eth_platform_data sheevaplug_ge00_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
 };
 
+static struct mv_sata_platform_data sheeva_esata_sata_data = {
+	.n_ports	= 2,
+};
+
 static struct mvsdio_platform_data sheevaplug_mvsdio_data = {
 	/* unfortunately the CD signal has not been connected */
 };
 
+static struct mvsdio_platform_data sheeva_esata_mvsdio_data = {
+	.gpio_write_protect = 44, /* MPP44 used as SD write protect */
+	.gpio_card_detect = 47,	  /* MPP47 used as SD card detect */
+};
+
 static struct gpio_led sheevaplug_led_pins[] = {
 	{
 		.name			= "plug:green:health",
@@ -74,13 +84,26 @@ static unsigned int sheevaplug_mpp_config[] __initdata = {
 	0
 };
 
+static unsigned int sheeva_esata_mpp_config[] __initdata = {
+	MPP29_GPIO,	/* USB Power Enable */
+	MPP44_GPIO,	/* SD Write Protect */
+	MPP47_GPIO,	/* SD Card Detect */
+	MPP49_GPIO,	/* LED Green */
+	0
+};
+
 static void __init sheevaplug_init(void)
 {
 	/*
 	 * Basic setup. Needs to be called early.
 	 */
 	kirkwood_init();
-	kirkwood_mpp_conf(sheevaplug_mpp_config);
+
+	/* setup gpio pin select */
+	if (machine_is_sheeva_esata())
+		kirkwood_mpp_conf(sheeva_esata_mpp_config);
+	else
+		kirkwood_mpp_conf(sheevaplug_mpp_config);
 
 	kirkwood_uart0_init();
 	kirkwood_nand_init(ARRAY_AND_SIZE(sheevaplug_nand_parts), 25);
@@ -91,11 +114,21 @@ static void __init sheevaplug_init(void)
 	kirkwood_ehci_init();
 
 	kirkwood_ge00_init(&sheevaplug_ge00_data);
-	kirkwood_sdio_init(&sheevaplug_mvsdio_data);
+
+	/* honor lower power consumption for plugs with out eSATA */
+	if (machine_is_sheeva_esata())
+		kirkwood_sata_init(&sheeva_esata_sata_data);
+
+	/* enable sd wp and sd cd on plugs with esata */
+	if (machine_is_sheeva_esata())
+		kirkwood_sdio_init(&sheeva_esata_mvsdio_data);
+	else
+		kirkwood_sdio_init(&sheevaplug_mvsdio_data);
 
 	platform_device_register(&sheevaplug_leds);
 }
 
+#ifdef CONFIG_MACH_SHEEVAPLUG
 MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")
 	/* Maintainer: shadi Ammouri <shadi@marvell.com> */
 	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
@@ -106,3 +139,16 @@ MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")
 	.init_irq	= kirkwood_init_irq,
 	.timer		= &kirkwood_timer,
 MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_ESATA_SHEEVAPLUG
+MACHINE_START(ESATA_SHEEVAPLUG, "Marvell eSATA SheevaPlug Reference Board")
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= sheevaplug_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index c6a564fc4a7c..6ab843eaa35b 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -1,6 +1,6 @@
 if ARCH_MMP
 
-menu "Marvell PXA168/910 Implmentations"
+menu "Marvell PXA168/910/MMP2 Implmentations"
 
 config MACH_ASPENITE
 	bool "Marvell's PXA168 Aspenite Development Board"
@@ -16,6 +16,13 @@ config MACH_ZYLONITE2
 	  Say 'Y' here if you want to support the Marvell PXA168-based
 	  Zylonite2 Development Board.
 
+config MACH_AVENGERS_LITE
+	bool "Marvell's PXA168 Avengers Lite Development Board"
+	select CPU_PXA168
+	help
+	  Say 'Y' here if you want to support the Marvell PXA168-based
+	  Avengers Lite Development Board.
+
 config MACH_TAVOREVB
 	bool "Marvell's PXA910 TavorEVB Development Board"
 	select CPU_PXA910
@@ -30,6 +37,26 @@ config MACH_TTC_DKB
 	  Say 'Y' here if you want to support the Marvell PXA910-based
 	  TTC_DKB Development Board.
 
+config MACH_FLINT
+	bool "Marvell's Flint Development Platform"
+	select CPU_MMP2
+	help
+	  Say 'Y' here if you want to support the Marvell MMP2-based
+	  Flint Development Platform.
+	  MMP2-based board can't be co-existed with PXA168-based &
+	  PXA910-based development board. Since MMP2 is compatible to
+	  ARMv6 architecture.
+
+config MACH_MARVELL_JASPER
+	bool "Marvell's Jasper Development Platform"
+	select CPU_MMP2
+	help
+	  Say 'Y' here if you want to support the Marvell MMP2-base
+	  Jasper Development Platform.
+	  MMP2-based board can't be co-existed with PXA168-based &
+	  PXA910-based development board. Since MMP2 is compatible to
+	  ARMv6 architecture.
+
 endmenu
 
 config CPU_PXA168
@@ -44,4 +71,10 @@ config CPU_PXA910
 	help
 	  Select code specific to PXA910
 
+config CPU_MMP2
+	bool
+	select CPU_V6
+	select CPU_32v6K
+	help
+	  Select code specific to MMP2. MMP2 is ARMv6 compatible.
 endif
diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
index 6883e6584883..8b66d06739c4 100644
--- a/arch/arm/mach-mmp/Makefile
+++ b/arch/arm/mach-mmp/Makefile
@@ -2,14 +2,18 @@
 # Makefile for Marvell's PXA168 processors line
 #
 
-obj-y				+= common.o clock.o devices.o irq.o time.o
+obj-y				+= common.o clock.o devices.o time.o
 
 # SoC support
-obj-$(CONFIG_CPU_PXA168)	+= pxa168.o
-obj-$(CONFIG_CPU_PXA910)	+= pxa910.o
+obj-$(CONFIG_CPU_PXA168)	+= pxa168.o irq-pxa168.o
+obj-$(CONFIG_CPU_PXA910)	+= pxa910.o irq-pxa168.o
+obj-$(CONFIG_CPU_MMP2)		+= mmp2.o irq-mmp2.o
 
 # board support
 obj-$(CONFIG_MACH_ASPENITE)	+= aspenite.o
 obj-$(CONFIG_MACH_ZYLONITE2)	+= aspenite.o
+obj-$(CONFIG_MACH_AVENGERS_LITE)+= avengers_lite.o
 obj-$(CONFIG_MACH_TAVOREVB)	+= tavorevb.o
 obj-$(CONFIG_MACH_TTC_DKB)	+= ttc_dkb.o
+obj-$(CONFIG_MACH_FLINT)	+= flint.o
+obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o
diff --git a/arch/arm/mach-mmp/avengers_lite.c b/arch/arm/mach-mmp/avengers_lite.c
new file mode 100644
index 000000000000..8c3fa5d14f4b
--- /dev/null
+++ b/arch/arm/mach-mmp/avengers_lite.c
@@ -0,0 +1,51 @@
+/*
+ *  linux/arch/arm/mach-mmp/avengers_lite.c
+ *
+ *  Support for the Marvell PXA168-based Avengers lite Development Platform.
+ *
+ *  Copyright (C) 2009-2010 Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/addr-map.h>
+#include <mach/mfp-pxa168.h>
+#include <mach/pxa168.h>
+#include <mach/irqs.h>
+
+
+#include "common.h"
+#include <linux/delay.h>
+
+/* Avengers lite MFP configurations */
+static unsigned long avengers_lite_pin_config_V16F[] __initdata = {
+	/* DEBUG_UART */
+	GPIO88_UART2_TXD,
+	GPIO89_UART2_RXD,
+};
+
+static void __init avengers_lite_init(void)
+{
+	mfp_config(ARRAY_AND_SIZE(avengers_lite_pin_config_V16F));
+
+	/* on-chip devices */
+	pxa168_add_uart(2);
+}
+
+MACHINE_START(AVENGERS_LITE, "PXA168 Avengers lite Development Platform")
+	.phys_io        = APB_PHYS_BASE,
+	.boot_params    = 0x00000100,
+	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
+	.map_io		= pxa_map_io,
+	.init_irq       = pxa168_init_irq,
+	.timer          = &pxa168_timer,
+	.init_machine   = avengers_lite_init,
+MACHINE_END
diff --git a/arch/arm/mach-mmp/common.h b/arch/arm/mach-mmp/common.h
index c33fbbc49417..b4a0ba05a0f4 100644
--- a/arch/arm/mach-mmp/common.h
+++ b/arch/arm/mach-mmp/common.h
@@ -3,11 +3,15 @@
 struct sys_timer;
 
 extern void timer_init(int irq);
+extern void mmp2_clear_pmic_int(void);
 
 extern struct sys_timer pxa168_timer;
 extern struct sys_timer pxa910_timer;
+extern struct sys_timer mmp2_timer;
 extern void __init pxa168_init_irq(void);
 extern void __init pxa910_init_irq(void);
+extern void __init mmp2_init_icu(void);
+extern void __init mmp2_init_irq(void);
 
 extern void __init icu_init_irq(void);
 extern void __init pxa_map_io(void);
diff --git a/arch/arm/mach-mmp/flint.c b/arch/arm/mach-mmp/flint.c
new file mode 100644
index 000000000000..4ec7709a3462
--- /dev/null
+++ b/arch/arm/mach-mmp/flint.c
@@ -0,0 +1,123 @@
+/*
+ *  linux/arch/arm/mach-mmp/flint.c
+ *
+ *  Support for the Marvell Flint Development Platform.
+ *
+ *  Copyright (C) 2009 Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/smc91x.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/addr-map.h>
+#include <mach/mfp-mmp2.h>
+#include <mach/mmp2.h>
+
+#include "common.h"
+
+static unsigned long flint_pin_config[] __initdata = {
+	/* UART1 */
+	GPIO45_UART1_RXD,
+	GPIO46_UART1_TXD,
+
+	/* UART2 */
+	GPIO47_UART2_RXD,
+	GPIO48_UART2_TXD,
+
+	/* SMC */
+	GPIO151_SMC_SCLK,
+	GPIO145_SMC_nCS0,
+	GPIO146_SMC_nCS1,
+	GPIO152_SMC_BE0,
+	GPIO153_SMC_BE1,
+	GPIO154_SMC_IRQ,
+	GPIO113_SMC_RDY,
+
+	/*Ethernet*/
+	GPIO155_GPIO155,
+
+	/* DFI */
+	GPIO168_DFI_D0,
+	GPIO167_DFI_D1,
+	GPIO166_DFI_D2,
+	GPIO165_DFI_D3,
+	GPIO107_DFI_D4,
+	GPIO106_DFI_D5,
+	GPIO105_DFI_D6,
+	GPIO104_DFI_D7,
+	GPIO111_DFI_D8,
+	GPIO164_DFI_D9,
+	GPIO163_DFI_D10,
+	GPIO162_DFI_D11,
+	GPIO161_DFI_D12,
+	GPIO110_DFI_D13,
+	GPIO109_DFI_D14,
+	GPIO108_DFI_D15,
+	GPIO143_ND_nCS0,
+	GPIO144_ND_nCS1,
+	GPIO147_ND_nWE,
+	GPIO148_ND_nRE,
+	GPIO150_ND_ALE,
+	GPIO149_ND_CLE,
+	GPIO112_ND_RDY0,
+	GPIO160_ND_RDY1,
+};
+
+static struct smc91x_platdata flint_smc91x_info = {
+	.flags  = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start  = SMC_CS1_PHYS_BASE + 0x300,
+		.end    = SMC_CS1_PHYS_BASE + 0xfffff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = gpio_to_irq(155),
+		.end    = gpio_to_irq(155),
+		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	}
+};
+
+static struct platform_device smc91x_device = {
+	.name           = "smc91x",
+	.id             = 0,
+	.dev            = {
+		.platform_data = &flint_smc91x_info,
+	},
+	.num_resources  = ARRAY_SIZE(smc91x_resources),
+	.resource       = smc91x_resources,
+};
+
+static void __init flint_init(void)
+{
+	mfp_config(ARRAY_AND_SIZE(flint_pin_config));
+
+	/* on-chip devices */
+	mmp2_add_uart(1);
+	mmp2_add_uart(2);
+
+	/* off-chip devices */
+	platform_device_register(&smc91x_device);
+}
+
+MACHINE_START(FLINT, "Flint Development Platform")
+	.phys_io        = APB_PHYS_BASE,
+	.boot_params    = 0x00000100,
+	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
+	.map_io		= pxa_map_io,
+	.init_irq       = mmp2_init_irq,
+	.timer          = &mmp2_timer,
+	.init_machine   = flint_init,
+MACHINE_END
diff --git a/arch/arm/mach-mmp/include/mach/cputype.h b/arch/arm/mach-mmp/include/mach/cputype.h
index 25e797b09083..83b18721d933 100644
--- a/arch/arm/mach-mmp/include/mach/cputype.h
+++ b/arch/arm/mach-mmp/include/mach/cputype.h
@@ -8,6 +8,7 @@
  *
  * PXA168    A0    0x41159263   0x56158400   0x00A0A333
  * PXA910    Y0    0x41159262   0x56158000   0x00F0C910
+ * MMP2	     Z0			0x560f5811
  */
 
 #ifdef CONFIG_CPU_PXA168
@@ -24,7 +25,15 @@
 #  define __cpu_is_pxa910(id)	(0)
 #endif
 
+#ifdef CONFIG_CPU_MMP2
+#  define __cpu_is_mmp2(id)	\
+	({ unsigned int _id = ((id) >> 8) & 0xff; _id == 0x58; })
+#else
+#  define __cpu_is_mmp2(id)	(0)
+#endif
+
 #define cpu_is_pxa168()		({ __cpu_is_pxa168(read_cpuid_id()); })
 #define cpu_is_pxa910()		({ __cpu_is_pxa910(read_cpuid_id()); })
+#define cpu_is_mmp2()		({ __cpu_is_mmp2(read_cpuid_id()); })
 
 #endif /* __ASM_MACH_CPUTYPE_H */
diff --git a/arch/arm/mach-mmp/include/mach/devices.h b/arch/arm/mach-mmp/include/mach/devices.h
index 24585397217e..1fa0a492454a 100644
--- a/arch/arm/mach-mmp/include/mach/devices.h
+++ b/arch/arm/mach-mmp/include/mach/devices.h
@@ -34,4 +34,16 @@ struct pxa_device_desc pxa910_device_##_name __initdata = {		\
 	.size		= _size,					\
 	.dma		= { _dma },					\
 };
+
+#define MMP2_DEVICE(_name, _drv, _id, _irq, _start, _size, _dma...)	\
+struct pxa_device_desc mmp2_device_##_name __initdata = {		\
+	.dev_name	= "mmp2-" #_name,				\
+	.drv_name	= _drv,						\
+	.id		= _id,						\
+	.irq		= IRQ_MMP2_##_irq,				\
+	.start		= _start,					\
+	.size		= _size,					\
+	.dma		= { _dma },					\
+}
+
 extern int pxa_register_device(struct pxa_device_desc *, void *, size_t);
diff --git a/arch/arm/mach-mmp/include/mach/entry-macro.S b/arch/arm/mach-mmp/include/mach/entry-macro.S
index 6d3cd35478b5..c42d9d4e892d 100644
--- a/arch/arm/mach-mmp/include/mach/entry-macro.S
+++ b/arch/arm/mach-mmp/include/mach/entry-macro.S
@@ -15,7 +15,12 @@
 	.endm
 
 	.macro	get_irqnr_preamble, base, tmp
-	ldr	\base, =ICU_AP_IRQ_SEL_INT_NUM
+	mrc	p15, 0, \tmp, c0, c0, 0		@ CPUID
+	and	\tmp, \tmp, #0xff00
+	cmp	\tmp, #0x5800
+	ldr	\base, =ICU_VIRT_BASE
+	addne	\base, \base, #0x10c		@ PJ1 AP INT SEL register
+	addeq	\base, \base, #0x104		@ PJ4 IRQ SEL register
 	.endm
 
 	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
diff --git a/arch/arm/mach-mmp/include/mach/irqs.h b/arch/arm/mach-mmp/include/mach/irqs.h
index d68871b0f28c..02701196ea03 100644
--- a/arch/arm/mach-mmp/include/mach/irqs.h
+++ b/arch/arm/mach-mmp/include/mach/irqs.h
@@ -113,10 +113,119 @@
 #define IRQ_PXA910_AP_PMU		60
 #define IRQ_PXA910_SM_INT		63	/* from PinMux */
 
-#define IRQ_GPIO_START			64
-#define IRQ_GPIO_NUM			128
+/*
+ * Interrupt numbers for MMP2
+ */
+#define IRQ_MMP2_NONE			(-1)
+#define IRQ_MMP2_SSP1			0
+#define IRQ_MMP2_SSP2			1
+#define IRQ_MMP2_SSPA1			2
+#define IRQ_MMP2_SSPA2			3
+#define IRQ_MMP2_PMIC_MUX		4	/* PMIC & Charger */
+#define IRQ_MMP2_RTC_MUX		5
+#define IRQ_MMP2_TWSI1			7
+#define IRQ_MMP2_GPU			8
+#define IRQ_MMP2_KEYPAD			9
+#define IRQ_MMP2_ROTARY			10
+#define IRQ_MMP2_TRACKBALL		11
+#define IRQ_MMP2_ONEWIRE		12
+#define IRQ_MMP2_TIMER1			13
+#define IRQ_MMP2_TIMER2			14
+#define IRQ_MMP2_TIMER3			15
+#define IRQ_MMP2_RIPC			16
+#define IRQ_MMP2_TWSI_MUX		17	/* TWSI2 ~ TWSI6 */
+#define IRQ_MMP2_HDMI			19
+#define IRQ_MMP2_SSP3			20
+#define IRQ_MMP2_SSP4			21
+#define IRQ_MMP2_USB_HS1		22
+#define IRQ_MMP2_USB_HS2		23
+#define IRQ_MMP2_UART3			24
+#define IRQ_MMP2_UART1			27
+#define IRQ_MMP2_UART2			28
+#define IRQ_MMP2_MIPI_DSI		29
+#define IRQ_MMP2_CI2			30
+#define IRQ_MMP2_PMU_TIMER1		31
+#define IRQ_MMP2_PMU_TIMER2		32
+#define IRQ_MMP2_PMU_TIMER3		33
+#define IRQ_MMP2_USB_FS			34
+#define IRQ_MMP2_MISC_MUX		35
+#define IRQ_MMP2_WDT1			36
+#define IRQ_MMP2_NAND_DMA		37
+#define IRQ_MMP2_USIM			38
+#define IRQ_MMP2_MMC			39
+#define IRQ_MMP2_WTM			40
+#define IRQ_MMP2_LCD			41
+#define IRQ_MMP2_CI			42
+#define IRQ_MMP2_IRE			43
+#define IRQ_MMP2_USB_OTG		44
+#define IRQ_MMP2_NAND			45
+#define IRQ_MMP2_UART4			46
+#define IRQ_MMP2_DMA_FIQ		47
+#define IRQ_MMP2_DMA_RIQ		48
+#define IRQ_MMP2_GPIO			49
+#define IRQ_MMP2_SSP_MUX		51
+#define IRQ_MMP2_MMC2			52
+#define IRQ_MMP2_MMC3			53
+#define IRQ_MMP2_MMC4			54
+#define IRQ_MMP2_MIPI_HSI		55
+#define IRQ_MMP2_MSP			58
+#define IRQ_MMP2_MIPI_SLIM_DMA		59
+#define IRQ_MMP2_PJ4_FREQ_CHG		60
+#define IRQ_MMP2_MIPI_SLIM		62
+#define IRQ_MMP2_SM			63
+
+#define IRQ_MMP2_MUX_BASE		64
+
+/* secondary interrupt of INT #4 */
+#define IRQ_MMP2_PMIC_BASE		(IRQ_MMP2_MUX_BASE)
+#define IRQ_MMP2_CHARGER		(IRQ_MMP2_PMIC_BASE + 0)
+#define IRQ_MMP2_PMIC			(IRQ_MMP2_PMIC_BASE + 1)
+
+/* secondary interrupt of INT #5 */
+#define IRQ_MMP2_RTC_BASE		(IRQ_MMP2_PMIC_BASE + 2)
+#define IRQ_MMP2_RTC_ALARM		(IRQ_MMP2_RTC_BASE + 0)
+#define IRQ_MMP2_RTC			(IRQ_MMP2_RTC_BASE + 1)
+
+/* secondary interrupt of INT #17 */
+#define IRQ_MMP2_TWSI_BASE		(IRQ_MMP2_RTC_BASE + 2)
+#define IRQ_MMP2_TWSI2			(IRQ_MMP2_TWSI_BASE + 0)
+#define IRQ_MMP2_TWSI3			(IRQ_MMP2_TWSI_BASE + 1)
+#define IRQ_MMP2_TWSI4			(IRQ_MMP2_TWSI_BASE + 2)
+#define IRQ_MMP2_TWSI5			(IRQ_MMP2_TWSI_BASE + 3)
+#define IRQ_MMP2_TWSI6			(IRQ_MMP2_TWSI_BASE + 4)
+
+/* secondary interrupt of INT #35 */
+#define IRQ_MMP2_MISC_BASE		(IRQ_MMP2_TWSI_BASE + 5)
+#define IRQ_MMP2_PERF			(IRQ_MMP2_MISC_BASE + 0)
+#define IRQ_MMP2_L2_PA_ECC		(IRQ_MMP2_MISC_BASE + 1)
+#define IRQ_MMP2_L2_ECC			(IRQ_MMP2_MISC_BASE + 2)
+#define IRQ_MMP2_L2_UECC		(IRQ_MMP2_MISC_BASE + 3)
+#define IRQ_MMP2_DDR			(IRQ_MMP2_MISC_BASE + 4)
+#define IRQ_MMP2_FAB0_TIMEOUT		(IRQ_MMP2_MISC_BASE + 5)
+#define IRQ_MMP2_FAB1_TIMEOUT		(IRQ_MMP2_MISC_BASE + 6)
+#define IRQ_MMP2_FAB2_TIMEOUT		(IRQ_MMP2_MISC_BASE + 7)
+#define IRQ_MMP2_THERMAL		(IRQ_MMP2_MISC_BASE + 9)
+#define IRQ_MMP2_MAIN_PMU		(IRQ_MMP2_MISC_BASE + 10)
+#define IRQ_MMP2_WDT2			(IRQ_MMP2_MISC_BASE + 11)
+#define IRQ_MMP2_CORESIGHT		(IRQ_MMP2_MISC_BASE + 12)
+#define IRQ_MMP2_COMMTX			(IRQ_MMP2_MISC_BASE + 13)
+#define IRQ_MMP2_COMMRX			(IRQ_MMP2_MISC_BASE + 14)
+
+/* secondary interrupt of INT #51 */
+#define IRQ_MMP2_SSP_BASE		(IRQ_MMP2_MISC_BASE + 15)
+#define IRQ_MMP2_SSP1_SRDY		(IRQ_MMP2_SSP_BASE + 0)
+#define IRQ_MMP2_SSP3_SRDY		(IRQ_MMP2_SSP_BASE + 1)
+
+#define IRQ_MMP2_MUX_END		(IRQ_MMP2_SSP_BASE + 2)
+
+#define IRQ_GPIO_START			128
+#define IRQ_GPIO_NUM			192
 #define IRQ_GPIO(x)			(IRQ_GPIO_START + (x))
 
-#define NR_IRQS		(IRQ_GPIO_START + IRQ_GPIO_NUM)
+/* Board IRQ - 64 by default, increase if not enough */
+#define IRQ_BOARD_START			(IRQ_GPIO_START + IRQ_GPIO_NUM)
+#define IRQ_BOARD_END			(IRQ_BOARD_START + 64)
+
+#define NR_IRQS				(IRQ_BOARD_END)
 
 #endif /* __ASM_MACH_IRQS_H */
diff --git a/arch/arm/mach-mmp/include/mach/mfp-mmp2.h b/arch/arm/mach-mmp/include/mach/mfp-mmp2.h
new file mode 100644
index 000000000000..9f9f8143e272
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/mfp-mmp2.h
@@ -0,0 +1,240 @@
+#ifndef __ASM_MACH_MFP_MMP2_H
+#define __ASM_MACH_MFP_MMP2_H
+
+#include <mach/mfp.h>
+
+#define MFP_DRIVE_VERY_SLOW	(0x0 << 13)
+#define MFP_DRIVE_SLOW		(0x2 << 13)
+#define MFP_DRIVE_MEDIUM	(0x4 << 13)
+#define MFP_DRIVE_FAST		(0x8 << 13)
+
+/* GPIO */
+
+/* DFI */
+#define GPIO108_DFI_D15		MFP_CFG(GPIO108, AF0)
+#define GPIO109_DFI_D14		MFP_CFG(GPIO109, AF0)
+#define GPIO110_DFI_D13		MFP_CFG(GPIO110, AF0)
+#define GPIO161_DFI_D12		MFP_CFG(GPIO161, AF0)
+#define GPIO162_DFI_D11		MFP_CFG(GPIO162, AF0)
+#define GPIO163_DFI_D10		MFP_CFG(GPIO163, AF0)
+#define GPIO164_DFI_D9		MFP_CFG(GPIO164, AF0)
+#define GPIO111_DFI_D8		MFP_CFG(GPIO111, AF0)
+#define GPIO104_DFI_D7		MFP_CFG(GPIO104, AF0)
+#define GPIO105_DFI_D6		MFP_CFG(GPIO105, AF0)
+#define GPIO106_DFI_D5		MFP_CFG(GPIO106, AF0)
+#define GPIO107_DFI_D4		MFP_CFG(GPIO107, AF0)
+#define GPIO165_DFI_D3		MFP_CFG(GPIO165, AF0)
+#define GPIO166_DFI_D2		MFP_CFG(GPIO166, AF0)
+#define GPIO167_DFI_D1		MFP_CFG(GPIO167, AF0)
+#define GPIO168_DFI_D0		MFP_CFG(GPIO168, AF0)
+#define GPIO143_ND_nCS0		MFP_CFG(GPIO143, AF0)
+#define GPIO144_ND_nCS1		MFP_CFG(GPIO144, AF0)
+#define GPIO147_ND_nWE		MFP_CFG(GPIO147, AF0)
+#define GPIO148_ND_nRE		MFP_CFG(GPIO148, AF0)
+#define GPIO150_ND_ALE		MFP_CFG(GPIO150, AF0)
+#define GPIO149_ND_CLE		MFP_CFG(GPIO149, AF0)
+#define GPIO112_ND_RDY0		MFP_CFG(GPIO112, AF0)
+#define GPIO160_ND_RDY1		MFP_CFG(GPIO160, AF0)
+
+/* Static Memory Controller */
+#define GPIO145_SMC_nCS0	MFP_CFG(GPIO145, AF0)
+#define GPIO146_SMC_nCS1	MFP_CFG(GPIO146, AF0)
+#define GPIO152_SMC_BE0		MFP_CFG(GPIO152, AF0)
+#define GPIO153_SMC_BE1		MFP_CFG(GPIO153, AF0)
+#define GPIO154_SMC_IRQ		MFP_CFG(GPIO154, AF0)
+#define GPIO113_SMC_RDY		MFP_CFG(GPIO113, AF0)
+#define GPIO151_SMC_SCLK	MFP_CFG(GPIO151, AF0)
+
+/* Ethernet */
+#define GPIO155_SM_ADVMUX	MFP_CFG(GPIO155, AF2)
+#define GPIO155_GPIO155		MFP_CFG(GPIO155, AF1)
+
+/* UART1 */
+#define GPIO45_UART1_RXD	MFP_CFG(GPIO45, AF1)
+#define GPIO46_UART1_TXD	MFP_CFG(GPIO46, AF1)
+#define GPIO29_UART1_RXD	MFP_CFG(GPIO29, AF1)
+#define GPIO30_UART1_TXD	MFP_CFG(GPIO30, AF1)
+#define GPIO31_UART1_CTS	MFP_CFG(GPIO31, AF1)
+#define GPIO32_UART1_RTS	MFP_CFG(GPIO32, AF1)
+
+/* UART2 */
+#define GPIO47_UART2_RXD	MFP_CFG(GPIO47, AF1)
+#define GPIO48_UART2_TXD	MFP_CFG(GPIO48, AF1)
+#define GPIO49_UART2_CTS	MFP_CFG(GPIO49, AF1)
+#define GPIO50_UART2_RTS	MFP_CFG(GPIO50, AF1)
+
+/* UART3 */
+#define GPIO51_UART3_RXD	MFP_CFG(GPIO51, AF1)
+#define GPIO52_UART3_TXD	MFP_CFG(GPIO52, AF1)
+#define GPIO53_UART3_CTS	MFP_CFG(GPIO53, AF1)
+#define GPIO54_UART3_RTS	MFP_CFG(GPIO54, AF1)
+
+/* MMC1 */
+#define GPIO124_MMC1_DAT7	MFP_CFG_DRV(GPIO124, AF1, FAST)
+#define GPIO125_MMC1_DAT6	MFP_CFG_DRV(GPIO125, AF1, FAST)
+#define GPIO129_MMC1_DAT5	MFP_CFG_DRV(GPIO129, AF1, FAST)
+#define GPIO130_MMC1_DAT4	MFP_CFG_DRV(GPIO130, AF1, FAST)
+#define GPIO131_MMC1_DAT3	MFP_CFG_DRV(GPIO131, AF1, FAST)
+#define GPIO132_MMC1_DAT2	MFP_CFG_DRV(GPIO132, AF1, FAST)
+#define GPIO133_MMC1_DAT1	MFP_CFG_DRV(GPIO133, AF1, FAST)
+#define GPIO134_MMC1_DAT0	MFP_CFG_DRV(GPIO134, AF1, FAST)
+#define GPIO136_MMC1_CMD	MFP_CFG_DRV(GPIO136, AF1, FAST)
+#define GPIO139_MMC1_CLK	MFP_CFG_DRV(GPIO139, AF1, FAST)
+#define GPIO140_MMC1_CD		MFP_CFG_DRV(GPIO140, AF1, FAST)
+#define GPIO141_MMC1_WP		MFP_CFG_DRV(GPIO141, AF1, FAST)
+
+/*MMC2*/
+#define GPIO37_MMC2_DAT3	MFP_CFG_DRV(GPIO37, AF1, FAST)
+#define GPIO38_MMC2_DAT2	MFP_CFG_DRV(GPIO38, AF1, FAST)
+#define GPIO39_MMC2_DAT1	MFP_CFG_DRV(GPIO39, AF1, FAST)
+#define GPIO40_MMC2_DAT0	MFP_CFG_DRV(GPIO40, AF1, FAST)
+#define GPIO41_MMC2_CMD		MFP_CFG_DRV(GPIO41, AF1, FAST)
+#define GPIO42_MMC2_CLK		MFP_CFG_DRV(GPIO42, AF1, FAST)
+
+/*MMC3*/
+#define GPIO165_MMC3_DAT7	MFP_CFG_DRV(GPIO165, AF2, FAST)
+#define GPIO162_MMC3_DAT6	MFP_CFG_DRV(GPIO162, AF2, FAST)
+#define GPIO166_MMC3_DAT5	MFP_CFG_DRV(GPIO166, AF2, FAST)
+#define GPIO163_MMC3_DAT4	MFP_CFG_DRV(GPIO163, AF2, FAST)
+#define GPIO167_MMC3_DAT3	MFP_CFG_DRV(GPIO167, AF2, FAST)
+#define GPIO164_MMC3_DAT2	MFP_CFG_DRV(GPIO164, AF2, FAST)
+#define GPIO168_MMC3_DAT1	MFP_CFG_DRV(GPIO168, AF2, FAST)
+#define GPIO111_MMC3_DAT0	MFP_CFG_DRV(GPIO111, AF2, FAST)
+#define GPIO112_MMC3_CMD	MFP_CFG_DRV(GPIO112, AF2, FAST)
+#define GPIO151_MMC3_CLK	MFP_CFG_DRV(GPIO151, AF2, FAST)
+
+/* LCD */
+#define GPIO74_LCD_FCLK		MFP_CFG_DRV(GPIO74, AF1, FAST)
+#define GPIO75_LCD_LCLK		MFP_CFG_DRV(GPIO75, AF1, FAST)
+#define GPIO76_LCD_PCLK		MFP_CFG_DRV(GPIO76, AF1, FAST)
+#define GPIO77_LCD_DENA		MFP_CFG_DRV(GPIO77, AF1, FAST)
+#define GPIO78_LCD_DD0		MFP_CFG_DRV(GPIO78, AF1, FAST)
+#define GPIO79_LCD_DD1		MFP_CFG_DRV(GPIO79, AF1, FAST)
+#define GPIO80_LCD_DD2		MFP_CFG_DRV(GPIO80, AF1, FAST)
+#define GPIO81_LCD_DD3		MFP_CFG_DRV(GPIO81, AF1, FAST)
+#define GPIO82_LCD_DD4		MFP_CFG_DRV(GPIO82, AF1, FAST)
+#define GPIO83_LCD_DD5		MFP_CFG_DRV(GPIO83, AF1, FAST)
+#define GPIO84_LCD_DD6		MFP_CFG_DRV(GPIO84, AF1, FAST)
+#define GPIO85_LCD_DD7		MFP_CFG_DRV(GPIO85, AF1, FAST)
+#define GPIO86_LCD_DD8		MFP_CFG_DRV(GPIO86, AF1, FAST)
+#define GPIO87_LCD_DD9		MFP_CFG_DRV(GPIO87, AF1, FAST)
+#define GPIO88_LCD_DD10		MFP_CFG_DRV(GPIO88, AF1, FAST)
+#define GPIO89_LCD_DD11		MFP_CFG_DRV(GPIO89, AF1, FAST)
+#define GPIO90_LCD_DD12		MFP_CFG_DRV(GPIO90, AF1, FAST)
+#define GPIO91_LCD_DD13		MFP_CFG_DRV(GPIO91, AF1, FAST)
+#define GPIO92_LCD_DD14		MFP_CFG_DRV(GPIO92, AF1, FAST)
+#define GPIO93_LCD_DD15		MFP_CFG_DRV(GPIO93, AF1, FAST)
+#define GPIO94_LCD_DD16		MFP_CFG_DRV(GPIO94, AF1, FAST)
+#define GPIO95_LCD_DD17		MFP_CFG_DRV(GPIO95, AF1, FAST)
+#define GPIO96_LCD_DD18		MFP_CFG_DRV(GPIO96, AF1, FAST)
+#define GPIO97_LCD_DD19		MFP_CFG_DRV(GPIO97, AF1, FAST)
+#define GPIO98_LCD_DD20		MFP_CFG_DRV(GPIO98, AF1, FAST)
+#define GPIO99_LCD_DD21		MFP_CFG_DRV(GPIO99, AF1, FAST)
+#define GPIO100_LCD_DD22	MFP_CFG_DRV(GPIO100, AF1, FAST)
+#define GPIO101_LCD_DD23	MFP_CFG_DRV(GPIO101, AF1, FAST)
+#define GPIO94_SPI_DCLK		MFP_CFG_DRV(GPIO94, AF3, FAST)
+#define GPIO95_SPI_CS0		MFP_CFG_DRV(GPIO95, AF3, FAST)
+#define GPIO96_SPI_DIN		MFP_CFG_DRV(GPIO96, AF3, FAST)
+#define GPIO97_SPI_DOUT		MFP_CFG_DRV(GPIO97, AF3, FAST)
+#define GPIO98_LCD_RST		MFP_CFG_DRV(GPIO98, AF0, FAST)
+
+#define GPIO114_MN_CLK_OUT	MFP_CFG_DRV(GPIO114, AF1, FAST)
+
+/*LCD TV path*/
+#define GPIO124_LCD_DD24	MFP_CFG_DRV(GPIO124, AF2, FAST)
+#define GPIO125_LCD_DD25	MFP_CFG_DRV(GPIO125, AF2, FAST)
+#define GPIO126_LCD_DD33	MFP_CFG_DRV(GPIO126, AF2, FAST)
+#define GPIO127_LCD_DD26	MFP_CFG_DRV(GPIO127, AF2, FAST)
+#define GPIO128_LCD_DD27	MFP_CFG_DRV(GPIO128, AF2, FAST)
+#define GPIO129_LCD_DD28	MFP_CFG_DRV(GPIO129, AF2, FAST)
+#define GPIO130_LCD_DD29	MFP_CFG_DRV(GPIO130, AF2, FAST)
+#define GPIO135_LCD_DD30	MFP_CFG_DRV(GPIO135, AF2, FAST)
+#define GPIO137_LCD_DD31	MFP_CFG_DRV(GPIO137, AF2, FAST)
+#define GPIO138_LCD_DD32	MFP_CFG_DRV(GPIO138, AF2, FAST)
+#define GPIO140_LCD_DD34	MFP_CFG_DRV(GPIO140, AF2, FAST)
+#define GPIO141_LCD_DD35	MFP_CFG_DRV(GPIO141, AF2, FAST)
+
+/* I2C */
+#define GPIO43_TWSI2_SCL	MFP_CFG_DRV(GPIO43, AF1, SLOW)
+#define GPIO44_TWSI2_SDA	MFP_CFG_DRV(GPIO44, AF1, SLOW)
+#define GPIO71_TWSI3_SCL	MFP_CFG_DRV(GPIO71, AF1, SLOW)
+#define GPIO72_TWSI3_SDA	MFP_CFG_DRV(GPIO72, AF1, SLOW)
+#define GPIO99_TWSI5_SCL	MFP_CFG_DRV(GPIO99, AF4, SLOW)
+#define GPIO100_TWSI5_SDA	MFP_CFG_DRV(GPIO100, AF4, SLOW)
+#define GPIO97_TWSI6_SCL	MFP_CFG_DRV(GPIO97, AF2, SLOW)
+#define GPIO98_TWSI6_SDA	MFP_CFG_DRV(GPIO98, AF2, SLOW)
+
+/* SSPA1 */
+#define GPIO24_I2S_SYSCLK	MFP_CFG(GPIO24, AF1)
+#define GPIO25_I2S_BITCLK	MFP_CFG(GPIO25, AF1)
+#define GPIO26_I2S_SYNC		MFP_CFG(GPIO26, AF1)
+#define GPIO27_I2S_DATA_OUT	MFP_CFG(GPIO27, AF1)
+#define GPIO28_I2S_SDATA_IN	MFP_CFG(GPIO28, AF1)
+#define GPIO114_I2S_MCLK	MFP_CFG(GPIO114, AF1)
+
+/* SSPA2 */
+#define GPIO33_SSPA2_CLK	MFP_CFG(GPIO33, AF1)
+#define GPIO34_SSPA2_FRM	MFP_CFG(GPIO34, AF1)
+#define GPIO35_SSPA2_TXD	MFP_CFG(GPIO35, AF1)
+#define GPIO36_SSPA2_RXD	MFP_CFG(GPIO36, AF1)
+
+/* Keypad */
+#define GPIO00_KP_MKIN0		MFP_CFG(GPIO0, AF1)
+#define GPIO01_KP_MKOUT0	MFP_CFG(GPIO1, AF1)
+#define GPIO02_KP_MKIN1		MFP_CFG(GPIO2, AF1)
+#define GPIO03_KP_MKOUT1	MFP_CFG(GPIO3, AF1)
+#define GPIO04_KP_MKIN2		MFP_CFG(GPIO4, AF1)
+#define GPIO05_KP_MKOUT2	MFP_CFG(GPIO5, AF1)
+#define GPIO06_KP_MKIN3		MFP_CFG(GPIO6, AF1)
+#define GPIO07_KP_MKOUT3	MFP_CFG(GPIO7, AF1)
+#define GPIO08_KP_MKIN4		MFP_CFG(GPIO8, AF1)
+#define GPIO09_KP_MKOUT4	MFP_CFG(GPIO9, AF1)
+#define GPIO10_KP_MKIN5		MFP_CFG(GPIO10, AF1)
+#define GPIO11_KP_MKOUT5	MFP_CFG(GPIO11, AF1)
+#define GPIO12_KP_MKIN6		MFP_CFG(GPIO12, AF1)
+#define GPIO13_KP_MKOUT6	MFP_CFG(GPIO13, AF1)
+#define GPIO14_KP_MKIN7		MFP_CFG(GPIO14, AF1)
+#define GPIO15_KP_MKOUT7	MFP_CFG(GPIO15, AF1)
+#define GPIO16_KP_DKIN0		MFP_CFG(GPIO16, AF1)
+#define GPIO17_KP_DKIN1		MFP_CFG(GPIO17, AF1)
+#define GPIO18_KP_DKIN2		MFP_CFG(GPIO18, AF1)
+#define GPIO19_KP_DKIN3		MFP_CFG(GPIO19, AF1)
+#define GPIO20_KP_DKIN4		MFP_CFG(GPIO20, AF1)
+#define GPIO21_KP_DKIN5		MFP_CFG(GPIO21, AF1)
+#define GPIO22_KP_DKIN6		MFP_CFG(GPIO22, AF1)
+#define GPIO23_KP_DKIN7		MFP_CFG(GPIO23, AF1)
+
+/* CAMERA */
+#define GPIO59_CCIC_IN7		MFP_CFG_DRV(GPIO59, AF1, FAST)
+#define GPIO60_CCIC_IN6		MFP_CFG_DRV(GPIO60, AF1, FAST)
+#define GPIO61_CCIC_IN5		MFP_CFG_DRV(GPIO61, AF1, FAST)
+#define GPIO62_CCIC_IN4		MFP_CFG_DRV(GPIO62, AF1, FAST)
+#define GPIO63_CCIC_IN3		MFP_CFG_DRV(GPIO63, AF1, FAST)
+#define GPIO64_CCIC_IN2		MFP_CFG_DRV(GPIO64, AF1, FAST)
+#define GPIO65_CCIC_IN1		MFP_CFG_DRV(GPIO65, AF1, FAST)
+#define GPIO66_CCIC_IN0		MFP_CFG_DRV(GPIO66, AF1, FAST)
+#define GPIO67_CAM_HSYNC	MFP_CFG_DRV(GPIO67, AF1, FAST)
+#define GPIO68_CAM_VSYNC	MFP_CFG_DRV(GPIO68, AF1, FAST)
+#define GPIO69_CAM_MCLK		MFP_CFG_DRV(GPIO69, AF1, FAST)
+#define GPIO70_CAM_PCLK		MFP_CFG_DRV(GPIO70, AF1, FAST)
+
+/* Wifi */
+#define GPIO45_GPIO45		MFP_CFG(GPIO45, AF0)
+#define GPIO46_GPIO46		MFP_CFG(GPIO46, AF0)
+#define GPIO21_GPIO21		MFP_CFG(GPIO21, AF0)
+#define GPIO22_GPIO22		MFP_CFG(GPIO22, AF0)
+#define GPIO55_GPIO55		MFP_CFG(GPIO55, AF0)
+#define GPIO56_GPIO56		MFP_CFG(GPIO56, AF0)
+#define GPIO57_GPIO57		MFP_CFG(GPIO57, AF0)
+#define GPIO58_GPIO58		MFP_CFG(GPIO58, AF0)
+
+/* Codec*/
+#define GPIO23_GPIO23		MFP_CFG(GPIO23, AF0)
+
+#define GPIO101_GPIO101		MFP_CFG(GPIO101, AF0)
+
+/* PMIC */
+#define PMIC_PMIC_INT		MFP_CFG(PMIC_INT, AF0)
+
+#endif /* __ASM_MACH_MFP_MMP2_H */
+
diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
index 3b216bf41e7f..ded43c455ec3 100644
--- a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
@@ -193,7 +193,9 @@
 #define GPIO32_CF_nCD1		MFP_CFG(GPIO32, AF3)
 #define GPIO33_CF_nCD2		MFP_CFG(GPIO33, AF3)
 
-/* UART1 */
+/* UART */
+#define GPIO88_UART2_TXD	MFP_CFG(GPIO88, AF2)
+#define GPIO89_UART2_RXD	MFP_CFG(GPIO89, AF2)
 #define GPIO107_UART1_TXD	MFP_CFG_DRV(GPIO107, AF1, FAST)
 #define GPIO107_UART1_RXD	MFP_CFG_DRV(GPIO107, AF2, FAST)
 #define GPIO108_UART1_RXD	MFP_CFG_DRV(GPIO108, AF1, FAST)
diff --git a/arch/arm/mach-mmp/include/mach/mmp2.h b/arch/arm/mach-mmp/include/mach/mmp2.h
new file mode 100644
index 000000000000..459f3be9cfb2
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/mmp2.h
@@ -0,0 +1,60 @@
+#ifndef __ASM_MACH_MMP2_H
+#define __ASM_MACH_MMP2_H
+
+#include <linux/i2c.h>
+#include <mach/devices.h>
+#include <plat/i2c.h>
+
+extern struct pxa_device_desc mmp2_device_uart1;
+extern struct pxa_device_desc mmp2_device_uart2;
+extern struct pxa_device_desc mmp2_device_uart3;
+extern struct pxa_device_desc mmp2_device_uart4;
+extern struct pxa_device_desc mmp2_device_twsi1;
+extern struct pxa_device_desc mmp2_device_twsi2;
+extern struct pxa_device_desc mmp2_device_twsi3;
+extern struct pxa_device_desc mmp2_device_twsi4;
+extern struct pxa_device_desc mmp2_device_twsi5;
+extern struct pxa_device_desc mmp2_device_twsi6;
+
+static inline int mmp2_add_uart(int id)
+{
+	struct pxa_device_desc *d = NULL;
+
+	switch (id) {
+	case 1: d = &mmp2_device_uart1; break;
+	case 2: d = &mmp2_device_uart2; break;
+	case 3: d = &mmp2_device_uart3; break;
+	case 4: d = &mmp2_device_uart4; break;
+	default:
+		return -EINVAL;
+	}
+
+	return pxa_register_device(d, NULL, 0);
+}
+
+static inline int mmp2_add_twsi(int id, struct i2c_pxa_platform_data *data,
+				  struct i2c_board_info *info, unsigned size)
+{
+	struct pxa_device_desc *d = NULL;
+	int ret;
+
+	switch (id) {
+	case 0: d = &mmp2_device_twsi1; break;
+	case 1: d = &mmp2_device_twsi2; break;
+	case 2: d = &mmp2_device_twsi3; break;
+	case 3: d = &mmp2_device_twsi4; break;
+	case 4: d = &mmp2_device_twsi5; break;
+	case 5: d = &mmp2_device_twsi6; break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = i2c_register_board_info(id, info, size);
+	if (ret)
+		return ret;
+
+	return pxa_register_device(d, data, sizeof(*data));
+}
+
+#endif /* __ASM_MACH_MMP2_H */
+
diff --git a/arch/arm/mach-mmp/include/mach/regs-apbc.h b/arch/arm/mach-mmp/include/mach/regs-apbc.h
index 98ccbee4bd0c..712af03fd1af 100644
--- a/arch/arm/mach-mmp/include/mach/regs-apbc.h
+++ b/arch/arm/mach-mmp/include/mach/regs-apbc.h
@@ -69,6 +69,47 @@
 #define APBC_PXA910_ASFAR	APBC_REG(0x050)
 #define APBC_PXA910_ASSAR	APBC_REG(0x054)
 
+/*
+ * APB Clock register offsets for MMP2
+ */
+#define APBC_MMP2_RTC		APBC_REG(0x000)
+#define APBC_MMP2_TWSI1		APBC_REG(0x004)
+#define APBC_MMP2_TWSI2		APBC_REG(0x008)
+#define APBC_MMP2_TWSI3		APBC_REG(0x00c)
+#define APBC_MMP2_TWSI4		APBC_REG(0x010)
+#define APBC_MMP2_ONEWIRE	APBC_REG(0x014)
+#define APBC_MMP2_KPC		APBC_REG(0x018)
+#define APBC_MMP2_TB_ROTARY	APBC_REG(0x01c)
+#define APBC_MMP2_SW_JTAG	APBC_REG(0x020)
+#define APBC_MMP2_TIMERS	APBC_REG(0x024)
+#define APBC_MMP2_UART1		APBC_REG(0x02c)
+#define APBC_MMP2_UART2		APBC_REG(0x030)
+#define APBC_MMP2_UART3		APBC_REG(0x034)
+#define APBC_MMP2_GPIO		APBC_REG(0x038)
+#define APBC_MMP2_PWM0		APBC_REG(0x03c)
+#define APBC_MMP2_PWM1		APBC_REG(0x040)
+#define APBC_MMP2_PWM2		APBC_REG(0x044)
+#define APBC_MMP2_PWM3		APBC_REG(0x048)
+#define APBC_MMP2_SSP0		APBC_REG(0x04c)
+#define APBC_MMP2_SSP1		APBC_REG(0x050)
+#define APBC_MMP2_SSP2		APBC_REG(0x054)
+#define APBC_MMP2_SSP3		APBC_REG(0x058)
+#define APBC_MMP2_SSP4		APBC_REG(0x05c)
+#define APBC_MMP2_SSP5		APBC_REG(0x060)
+#define APBC_MMP2_AIB		APBC_REG(0x064)
+#define APBC_MMP2_ASFAR		APBC_REG(0x068)
+#define APBC_MMP2_ASSAR		APBC_REG(0x06c)
+#define APBC_MMP2_USIM		APBC_REG(0x070)
+#define APBC_MMP2_MPMU		APBC_REG(0x074)
+#define APBC_MMP2_IPC		APBC_REG(0x078)
+#define APBC_MMP2_TWSI5		APBC_REG(0x07c)
+#define APBC_MMP2_TWSI6		APBC_REG(0x080)
+#define APBC_MMP2_TWSI_INTSTS	APBC_REG(0x084)
+#define APBC_MMP2_UART4		APBC_REG(0x088)
+#define APBC_MMP2_RIPC		APBC_REG(0x08c)
+#define APBC_MMP2_THSENS1	APBC_REG(0x090)	/* Thermal Sensor */
+#define APBC_MMP2_THSENS_INTSTS	APBC_REG(0x0a4)
+
 /* Common APB clock register bit definitions */
 #define APBC_APBCLK	(1 << 0)  /* APB Bus Clock Enable */
 #define APBC_FNCLK	(1 << 1)  /* Functional Clock Enable */
diff --git a/arch/arm/mach-mmp/include/mach/regs-icu.h b/arch/arm/mach-mmp/include/mach/regs-icu.h
index e5f08723e0cc..f882d91894be 100644
--- a/arch/arm/mach-mmp/include/mach/regs-icu.h
+++ b/arch/arm/mach-mmp/include/mach/regs-icu.h
@@ -17,10 +17,12 @@
 #define ICU_REG(x)	(ICU_VIRT_BASE + (x))
 
 #define ICU_INT_CONF(n)		ICU_REG((n) << 2)
+#define ICU_INT_CONF_MASK	(0xf)
+
+/************ PXA168/PXA910 (MMP) *********************/
 #define ICU_INT_CONF_AP_INT	(1 << 6)
 #define ICU_INT_CONF_CP_INT	(1 << 5)
 #define ICU_INT_CONF_IRQ	(1 << 4)
-#define ICU_INT_CONF_MASK	(0xf)
 
 #define ICU_AP_FIQ_SEL_INT_NUM	ICU_REG(0x108)	/* AP FIQ Selected Interrupt */
 #define ICU_AP_IRQ_SEL_INT_NUM	ICU_REG(0x10C)	/* AP IRQ Selected Interrupt */
@@ -28,4 +30,42 @@
 #define ICU_INT_STATUS_0	ICU_REG(0x128)	/* Interrupt Stuats 0 */
 #define ICU_INT_STATUS_1	ICU_REG(0x12C)	/* Interrupt Status 1 */
 
+/************************** MMP2 ***********************/
+
+/*
+ * IRQ0/FIQ0 is routed to SP IRQ/FIQ.
+ * IRQ1 is routed to PJ4 IRQ, and IRQ2 is routes to PJ4 FIQ.
+ */
+#define ICU_INT_ROUTE_SP_IRQ		(1 << 4)
+#define ICU_INT_ROUTE_PJ4_IRQ		(1 << 5)
+#define ICU_INT_ROUTE_PJ4_FIQ		(1 << 6)
+
+#define MMP2_ICU_PJ4_IRQ_STATUS0	ICU_REG(0x138)
+#define MMP2_ICU_PJ4_IRQ_STATUS1	ICU_REG(0x13c)
+#define MMP2_ICU_PJ4_FIQ_STATUS0	ICU_REG(0x140)
+#define MMP2_ICU_PJ4_FIQ_STATUS1	ICU_REG(0x144)
+
+#define MMP2_ICU_INT4_STATUS		ICU_REG(0x150)
+#define MMP2_ICU_INT5_STATUS		ICU_REG(0x154)
+#define MMP2_ICU_INT17_STATUS		ICU_REG(0x158)
+#define MMP2_ICU_INT35_STATUS		ICU_REG(0x15c)
+#define MMP2_ICU_INT51_STATUS		ICU_REG(0x160)
+
+#define MMP2_ICU_INT4_MASK		ICU_REG(0x168)
+#define MMP2_ICU_INT5_MASK		ICU_REG(0x16C)
+#define MMP2_ICU_INT17_MASK		ICU_REG(0x170)
+#define MMP2_ICU_INT35_MASK		ICU_REG(0x174)
+#define MMP2_ICU_INT51_MASK		ICU_REG(0x178)
+
+#define MMP2_ICU_SP_IRQ_SEL		ICU_REG(0x100)
+#define MMP2_ICU_PJ4_IRQ_SEL		ICU_REG(0x104)
+#define MMP2_ICU_PJ4_FIQ_SEL		ICU_REG(0x108)
+
+#define MMP2_ICU_INVERT			ICU_REG(0x164)
+
+#define MMP2_ICU_INV_PMIC		(1 << 0)
+#define MMP2_ICU_INV_PERF		(1 << 1)
+#define MMP2_ICU_INV_COMMTX		(1 << 2)
+#define MMP2_ICU_INV_COMMRX		(1 << 3)
+
 #endif /* __ASM_MACH_ICU_H */
diff --git a/arch/arm/mach-mmp/include/mach/uncompress.h b/arch/arm/mach-mmp/include/mach/uncompress.h
index c93d5fa5865c..a7dcc5307216 100644
--- a/arch/arm/mach-mmp/include/mach/uncompress.h
+++ b/arch/arm/mach-mmp/include/mach/uncompress.h
@@ -8,15 +8,16 @@
 
 #include <linux/serial_reg.h>
 #include <mach/addr-map.h>
+#include <asm/mach-types.h>
 
 #define UART1_BASE	(APB_PHYS_BASE + 0x36000)
 #define UART2_BASE	(APB_PHYS_BASE + 0x17000)
 #define UART3_BASE	(APB_PHYS_BASE + 0x18000)
 
+static volatile unsigned long *UART = (unsigned long *)UART2_BASE;
+
 static inline void putc(char c)
 {
-	volatile unsigned long *UART = (unsigned long *)UART2_BASE;
-
 	/* UART enabled? */
 	if (!(UART[UART_IER] & UART_IER_UUE))
 		return;
@@ -34,8 +35,14 @@ static inline void flush(void)
 {
 }
 
+static inline void arch_decomp_setup(void)
+{
+	if (machine_is_avengers_lite())
+		UART = (unsigned long *)UART3_BASE;
+}
+
 /*
  * nothing to do
  */
-#define arch_decomp_setup()
+
 #define arch_decomp_wdog()
diff --git a/arch/arm/mach-mmp/irq-mmp2.c b/arch/arm/mach-mmp/irq-mmp2.c
new file mode 100644
index 000000000000..cb18221c0af3
--- /dev/null
+++ b/arch/arm/mach-mmp/irq-mmp2.c
@@ -0,0 +1,154 @@
+/*
+ *  linux/arch/arm/mach-mmp/irq-mmp2.c
+ *
+ *  Generic IRQ handling, GPIO IRQ demultiplexing, etc.
+ *
+ *  Author:	Haojian Zhuang <haojian.zhuang@marvell.com>
+ *  Copyright:	Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/regs-icu.h>
+
+#include "common.h"
+
+static void icu_mask_irq(unsigned int irq)
+{
+	uint32_t r = __raw_readl(ICU_INT_CONF(irq));
+
+	r &= ~ICU_INT_ROUTE_PJ4_IRQ;
+	__raw_writel(r, ICU_INT_CONF(irq));
+}
+
+static void icu_unmask_irq(unsigned int irq)
+{
+	uint32_t r = __raw_readl(ICU_INT_CONF(irq));
+
+	r |= ICU_INT_ROUTE_PJ4_IRQ;
+	__raw_writel(r, ICU_INT_CONF(irq));
+}
+
+static struct irq_chip icu_irq_chip = {
+	.name		= "icu_irq",
+	.mask		= icu_mask_irq,
+	.mask_ack	= icu_mask_irq,
+	.unmask		= icu_unmask_irq,
+};
+
+static void pmic_irq_ack(unsigned int irq)
+{
+	if (irq == IRQ_MMP2_PMIC)
+		mmp2_clear_pmic_int();
+}
+
+#define SECOND_IRQ_MASK(_name_, irq_base, prefix)			\
+static void _name_##_mask_irq(unsigned int irq)				\
+{									\
+	uint32_t r;							\
+	r = __raw_readl(prefix##_MASK) | (1 << (irq - irq_base));	\
+	__raw_writel(r, prefix##_MASK);					\
+}
+
+#define SECOND_IRQ_UNMASK(_name_, irq_base, prefix)			\
+static void _name_##_unmask_irq(unsigned int irq)			\
+{									\
+	uint32_t r;							\
+	r = __raw_readl(prefix##_MASK) & ~(1 << (irq - irq_base));	\
+	__raw_writel(r, prefix##_MASK);					\
+}
+
+#define SECOND_IRQ_DEMUX(_name_, irq_base, prefix)			\
+static void _name_##_irq_demux(unsigned int irq, struct irq_desc *desc)	\
+{									\
+	unsigned long status, mask, n;					\
+	mask = __raw_readl(prefix##_MASK);				\
+	while (1) {							\
+		status = __raw_readl(prefix##_STATUS) & ~mask;		\
+		if (status == 0)					\
+			break;						\
+		n = find_first_bit(&status, BITS_PER_LONG);		\
+		while (n < BITS_PER_LONG) {				\
+			generic_handle_irq(irq_base + n);		\
+			n = find_next_bit(&status, BITS_PER_LONG, n+1);	\
+		}							\
+	}								\
+}
+
+#define SECOND_IRQ_CHIP(_name_, irq_base, prefix)			\
+SECOND_IRQ_MASK(_name_, irq_base, prefix)				\
+SECOND_IRQ_UNMASK(_name_, irq_base, prefix)				\
+SECOND_IRQ_DEMUX(_name_, irq_base, prefix)				\
+static struct irq_chip _name_##_irq_chip = {				\
+	.name		= #_name_,					\
+	.mask		= _name_##_mask_irq,				\
+	.unmask		= _name_##_unmask_irq,				\
+}
+
+SECOND_IRQ_CHIP(pmic, IRQ_MMP2_PMIC_BASE, MMP2_ICU_INT4);
+SECOND_IRQ_CHIP(rtc,  IRQ_MMP2_RTC_BASE,  MMP2_ICU_INT5);
+SECOND_IRQ_CHIP(twsi, IRQ_MMP2_TWSI_BASE, MMP2_ICU_INT17);
+SECOND_IRQ_CHIP(misc, IRQ_MMP2_MISC_BASE, MMP2_ICU_INT35);
+SECOND_IRQ_CHIP(ssp,  IRQ_MMP2_SSP_BASE,  MMP2_ICU_INT51);
+
+static void init_mux_irq(struct irq_chip *chip, int start, int num)
+{
+	int irq;
+
+	for (irq = start; num > 0; irq++, num--) {
+		/* mask and clear the IRQ */
+		chip->mask(irq);
+		if (chip->ack)
+			chip->ack(irq);
+
+		set_irq_chip(irq, chip);
+		set_irq_flags(irq, IRQF_VALID);
+		set_irq_handler(irq, handle_level_irq);
+	}
+}
+
+void __init mmp2_init_icu(void)
+{
+	int irq;
+
+	for (irq = 0; irq < IRQ_MMP2_MUX_BASE; irq++) {
+		icu_mask_irq(irq);
+		set_irq_chip(irq, &icu_irq_chip);
+		set_irq_flags(irq, IRQF_VALID);
+
+		switch (irq) {
+		case IRQ_MMP2_PMIC_MUX:
+		case IRQ_MMP2_RTC_MUX:
+		case IRQ_MMP2_TWSI_MUX:
+		case IRQ_MMP2_MISC_MUX:
+		case IRQ_MMP2_SSP_MUX:
+			break;
+		default:
+			set_irq_handler(irq, handle_level_irq);
+			break;
+		}
+	}
+
+	/* NOTE: IRQ_MMP2_PMIC requires the PMIC MFPR register
+	 * to be written to clear the interrupt
+	 */
+	pmic_irq_chip.ack = pmic_irq_ack;
+
+	init_mux_irq(&pmic_irq_chip, IRQ_MMP2_PMIC_BASE, 2);
+	init_mux_irq(&rtc_irq_chip, IRQ_MMP2_RTC_BASE, 2);
+	init_mux_irq(&twsi_irq_chip, IRQ_MMP2_TWSI_BASE, 5);
+	init_mux_irq(&misc_irq_chip, IRQ_MMP2_MISC_BASE, 15);
+	init_mux_irq(&ssp_irq_chip, IRQ_MMP2_SSP_BASE, 2);
+
+	set_irq_chained_handler(IRQ_MMP2_PMIC_MUX, pmic_irq_demux);
+	set_irq_chained_handler(IRQ_MMP2_RTC_MUX, rtc_irq_demux);
+	set_irq_chained_handler(IRQ_MMP2_TWSI_MUX, twsi_irq_demux);
+	set_irq_chained_handler(IRQ_MMP2_MISC_MUX, misc_irq_demux);
+	set_irq_chained_handler(IRQ_MMP2_SSP_MUX, ssp_irq_demux);
+}
diff --git a/arch/arm/mach-mmp/irq.c b/arch/arm/mach-mmp/irq-pxa168.c
index 52ff2f065eba..52ff2f065eba 100644
--- a/arch/arm/mach-mmp/irq.c
+++ b/arch/arm/mach-mmp/irq-pxa168.c
diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c
new file mode 100644
index 000000000000..cfd4d66ef800
--- /dev/null
+++ b/arch/arm/mach-mmp/jasper.c
@@ -0,0 +1,80 @@
+/*
+ *  linux/arch/arm/mach-mmp/jasper.c
+ *
+ *  Support for the Marvell Jasper Development Platform.
+ *
+ *  Copyright (C) 2009-2010 Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/addr-map.h>
+#include <mach/mfp-mmp2.h>
+#include <mach/mmp2.h>
+
+#include "common.h"
+
+static unsigned long jasper_pin_config[] __initdata = {
+	/* UART1 */
+	GPIO29_UART1_RXD,
+	GPIO30_UART1_TXD,
+
+	/* UART3 */
+	GPIO51_UART3_RXD,
+	GPIO52_UART3_TXD,
+
+	/* DFI */
+	GPIO168_DFI_D0,
+	GPIO167_DFI_D1,
+	GPIO166_DFI_D2,
+	GPIO165_DFI_D3,
+	GPIO107_DFI_D4,
+	GPIO106_DFI_D5,
+	GPIO105_DFI_D6,
+	GPIO104_DFI_D7,
+	GPIO111_DFI_D8,
+	GPIO164_DFI_D9,
+	GPIO163_DFI_D10,
+	GPIO162_DFI_D11,
+	GPIO161_DFI_D12,
+	GPIO110_DFI_D13,
+	GPIO109_DFI_D14,
+	GPIO108_DFI_D15,
+	GPIO143_ND_nCS0,
+	GPIO144_ND_nCS1,
+	GPIO147_ND_nWE,
+	GPIO148_ND_nRE,
+	GPIO150_ND_ALE,
+	GPIO149_ND_CLE,
+	GPIO112_ND_RDY0,
+	GPIO160_ND_RDY1,
+};
+
+static void __init jasper_init(void)
+{
+	mfp_config(ARRAY_AND_SIZE(jasper_pin_config));
+
+	/* on-chip devices */
+	mmp2_add_uart(1);
+	mmp2_add_uart(3);
+}
+
+MACHINE_START(MARVELL_JASPER, "Jasper Development Platform")
+	.phys_io        = APB_PHYS_BASE,
+	.boot_params    = 0x00000100,
+	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
+	.map_io		= pxa_map_io,
+	.init_irq       = mmp2_init_irq,
+	.timer          = &mmp2_timer,
+	.init_machine   = jasper_init,
+MACHINE_END
diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
new file mode 100644
index 000000000000..72eb9daeea99
--- /dev/null
+++ b/arch/arm/mach-mmp/mmp2.c
@@ -0,0 +1,123 @@
+/*
+ * linux/arch/arm/mach-mmp/mmp2.c
+ *
+ * code name MMP2
+ *
+ * Copyright (C) 2009 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <mach/addr-map.h>
+#include <mach/regs-apbc.h>
+#include <mach/regs-apmu.h>
+#include <mach/cputype.h>
+#include <mach/irqs.h>
+#include <mach/mfp.h>
+#include <mach/gpio.h>
+#include <mach/devices.h>
+
+#include "common.h"
+#include "clock.h"
+
+#define MFPR_VIRT_BASE	(APB_VIRT_BASE + 0x1e000)
+
+#define APMASK(i)	(GPIO_REGS_VIRT + BANK_OFF(i) + 0x9c)
+
+static struct mfp_addr_map mmp2_addr_map[] __initdata = {
+	MFP_ADDR(PMIC_INT, 0x2c4),
+
+	MFP_ADDR_END,
+};
+
+void mmp2_clear_pmic_int(void)
+{
+	unsigned long mfpr_pmic, data;
+
+	mfpr_pmic = APB_VIRT_BASE + 0x1e000 + 0x2c4;
+	data = __raw_readl(mfpr_pmic);
+	__raw_writel(data | (1 << 6), mfpr_pmic);
+	__raw_writel(data, mfpr_pmic);
+}
+
+static void __init mmp2_init_gpio(void)
+{
+	int i;
+
+	/* enable GPIO clock */
+	__raw_writel(APBC_APBCLK | APBC_FNCLK, APBC_MMP2_GPIO);
+
+	/* unmask GPIO edge detection for all 6 banks -- APMASKx */
+	for (i = 0; i < 6; i++)
+		__raw_writel(0xffffffff, APMASK(i));
+
+	pxa_init_gpio(IRQ_MMP2_GPIO, 0, 167, NULL);
+}
+
+void __init mmp2_init_irq(void)
+{
+	mmp2_init_icu();
+	mmp2_init_gpio();
+}
+
+/* APB peripheral clocks */
+static APBC_CLK(uart1, MMP2_UART1, 1, 26000000);
+static APBC_CLK(uart2, MMP2_UART2, 1, 26000000);
+static APBC_CLK(uart3, MMP2_UART3, 1, 26000000);
+static APBC_CLK(uart4, MMP2_UART4, 1, 26000000);
+static APBC_CLK(twsi1, MMP2_TWSI1, 0, 26000000);
+static APBC_CLK(twsi2, MMP2_TWSI2, 0, 26000000);
+static APBC_CLK(twsi3, MMP2_TWSI3, 0, 26000000);
+static APBC_CLK(twsi4, MMP2_TWSI4, 0, 26000000);
+static APBC_CLK(twsi5, MMP2_TWSI5, 0, 26000000);
+static APBC_CLK(twsi6, MMP2_TWSI6, 0, 26000000);
+static APBC_CLK(rtc, MMP2_RTC, 0, 32768);
+
+static APMU_CLK(nand, NAND, 0xbf, 100000000);
+
+static struct clk_lookup mmp2_clkregs[] = {
+	INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
+	INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
+	INIT_CLKREG(&clk_uart3, "pxa2xx-uart.2", NULL),
+	INIT_CLKREG(&clk_uart4, "pxa2xx-uart.3", NULL),
+	INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.0", NULL),
+	INIT_CLKREG(&clk_twsi2, "pxa2xx-i2c.1", NULL),
+	INIT_CLKREG(&clk_twsi3, "pxa2xx-i2c.2", NULL),
+	INIT_CLKREG(&clk_twsi4, "pxa2xx-i2c.3", NULL),
+	INIT_CLKREG(&clk_twsi5, "pxa2xx-i2c.4", NULL),
+	INIT_CLKREG(&clk_twsi6, "pxa2xx-i2c.5", NULL),
+	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
+};
+
+static int __init mmp2_init(void)
+{
+	if (cpu_is_mmp2()) {
+		mfp_init_base(MFPR_VIRT_BASE);
+		mfp_init_addr(mmp2_addr_map);
+		clks_register(ARRAY_AND_SIZE(mmp2_clkregs));
+	}
+
+	return 0;
+}
+postcore_initcall(mmp2_init);
+
+/* on-chip devices */
+MMP2_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4030000, 0x30, 4, 5);
+MMP2_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4017000, 0x30, 20, 21);
+MMP2_DEVICE(uart3, "pxa2xx-uart", 2, UART3, 0xd4018000, 0x30, 22, 23);
+MMP2_DEVICE(uart4, "pxa2xx-uart", 3, UART4, 0xd4016000, 0x30, 18, 19);
+MMP2_DEVICE(twsi1, "pxa2xx-i2c", 0, TWSI1, 0xd4011000, 0x70);
+MMP2_DEVICE(twsi2, "pxa2xx-i2c", 1, TWSI2, 0xd4031000, 0x70);
+MMP2_DEVICE(twsi3, "pxa2xx-i2c", 2, TWSI3, 0xd4032000, 0x70);
+MMP2_DEVICE(twsi4, "pxa2xx-i2c", 3, TWSI4, 0xd4033000, 0x70);
+MMP2_DEVICE(twsi5, "pxa2xx-i2c", 4, TWSI5, 0xd4033800, 0x70);
+MMP2_DEVICE(twsi6, "pxa2xx-i2c", 5, TWSI6, 0xd4034000, 0x70);
+MMP2_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x100, 28, 29);
+
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
index a8400bb891e7..cf75694e9687 100644
--- a/arch/arm/mach-mmp/time.c
+++ b/arch/arm/mach-mmp/time.c
@@ -30,7 +30,10 @@
 
 #include <mach/addr-map.h>
 #include <mach/regs-timers.h>
+#include <mach/regs-apbc.h>
 #include <mach/irqs.h>
+#include <mach/cputype.h>
+#include <asm/mach/time.h>
 
 #include "clock.h"
 
@@ -158,7 +161,7 @@ static void __init timer_config(void)
 
 	__raw_writel(cer & ~0x1, TIMERS_VIRT_BASE + TMR_CER); /* disable */
 
-	ccr &= TMR_CCR_CS_0(0x3);
+	ccr &= (cpu_is_mmp2()) ? TMR_CCR_CS_0(0) : TMR_CCR_CS_0(3);
 	__raw_writel(ccr, TIMERS_VIRT_BASE + TMR_CCR);
 
 	/* free-running mode */
@@ -197,3 +200,24 @@ void __init timer_init(int irq)
 	clocksource_register(&cksrc);
 	clockevents_register_device(&ckevt);
 }
+
+static void __init mmp2_timer_init(void)
+{
+	unsigned long clk_rst;
+
+	__raw_writel(APBC_APBCLK | APBC_RST, APBC_MMP2_TIMERS);
+
+	/*
+	 * enable bus/functional clock, enable 6.5MHz (divider 4),
+	 * release reset
+	 */
+	clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1);
+	__raw_writel(clk_rst, APBC_MMP2_TIMERS);
+
+	timer_init(IRQ_MMP2_TIMER1);
+}
+
+struct sys_timer mmp2_timer = {
+	.init	= mmp2_timer_init,
+};
+
diff --git a/arch/arm/mach-mv78xx0/Kconfig b/arch/arm/mach-mv78xx0/Kconfig
index 6fbe68fe4412..f2d309d0619e 100644
--- a/arch/arm/mach-mv78xx0/Kconfig
+++ b/arch/arm/mach-mv78xx0/Kconfig
@@ -14,6 +14,12 @@ config MACH_RD78X00_MASA
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell RD-78x00-mASA Reference Design.
 
+config MACH_TERASTATION_WXL
+	bool "Buffalo WLX (Terastation Duo) NAS"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Buffalo WXL Nas.
+
 endmenu
 
 endif
diff --git a/arch/arm/mach-mv78xx0/Makefile b/arch/arm/mach-mv78xx0/Makefile
index da628b7f3bb6..67a13f9bfe64 100644
--- a/arch/arm/mach-mv78xx0/Makefile
+++ b/arch/arm/mach-mv78xx0/Makefile
@@ -1,3 +1,4 @@
-obj-y				+= common.o addr-map.o irq.o pcie.o
+obj-y				+= common.o addr-map.o mpp.o irq.o pcie.o
 obj-$(CONFIG_MACH_DB78X00_BP)	+= db78x00-bp-setup.o
 obj-$(CONFIG_MACH_RD78X00_MASA)	+= rd78x00-masa-setup.o
+obj-$(CONFIG_MACH_TERASTATION_WXL) += buffalo-wxl-setup.o
diff --git a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
new file mode 100644
index 000000000000..61e5e583603b
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
@@ -0,0 +1,155 @@
+/*
+ * arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
+ *
+ * Buffalo WXL (Terastation Duo) Setup routines
+ *
+ * sebastien requiem <sebastien@requiem.fr>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
+#include <linux/i2c.h>
+#include <mach/mv78xx0.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include "common.h"
+#include "mpp.h"
+
+
+/* This arch has 2 Giga Ethernet */
+
+static struct mv643xx_eth_platform_data db78x00_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mv643xx_eth_platform_data db78x00_ge01_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+
+/* 2 SATA controller supporting HotPlug */
+
+static struct mv_sata_platform_data db78x00_sata_data = {
+	.n_ports	= 2,
+};
+
+static struct i2c_board_info __initdata db78x00_i2c_rtc = {
+	I2C_BOARD_INFO("ds1338", 0x68),
+};
+
+
+static unsigned int wxl_mpp_config[] __initdata = {
+	MPP0_GE1_TXCLK,
+	MPP1_GE1_TXCTL,
+	MPP2_GE1_RXCTL,
+	MPP3_GE1_RXCLK,
+	MPP4_GE1_TXD0,
+	MPP5_GE1_TXD1,
+	MPP6_GE1_TXD2,
+	MPP7_GE1_TXD3,
+	MPP8_GE1_RXD0,
+	MPP9_GE1_RXD1,
+	MPP10_GE1_RXD2,
+	MPP11_GE1_RXD3,
+	MPP12_GPIO,
+	MPP13_SYSRST_OUTn,
+	MPP14_SATA1_ACTn,
+	MPP15_SATA0_ACTn,
+	MPP16_GPIO,
+	MPP17_GPIO,
+	MPP18_GPIO,
+	MPP19_GPIO,
+	MPP20_GPIO,
+	MPP21_GPIO,
+	MPP22_GPIO,
+	MPP23_GPIO,
+	MPP24_UA2_TXD,
+	MPP25_UA2_RXD,
+	MPP26_UA2_CTSn,
+	MPP27_UA2_RTSn,
+	MPP28_GPIO,
+	MPP29_SYSRST_OUTn,
+	MPP30_GPIO,
+	MPP31_GPIO,
+	MPP32_GPIO,
+	MPP33_GPIO,
+	MPP34_GPIO,
+	MPP35_GPIO,
+	MPP36_GPIO,
+	MPP37_GPIO,
+	MPP38_GPIO,
+	MPP39_GPIO,
+	MPP40_UNUSED,
+	MPP41_UNUSED,
+	MPP42_UNUSED,
+	MPP43_UNUSED,
+	MPP44_UNUSED,
+	MPP45_UNUSED,
+	MPP46_UNUSED,
+	MPP47_UNUSED,
+	MPP48_SATA1_ACTn,
+	MPP49_SATA0_ACTn,
+	0
+};
+
+
+static void __init wxl_init(void)
+{
+	/*
+	 * Basic MV78xx0 setup. Needs to be called early.
+	 */
+	mv78xx0_init();
+	mv78xx0_mpp_conf(wxl_mpp_config);
+
+	/*
+	 * Partition on-chip peripherals between the two CPU cores.
+	 */
+	mv78xx0_ehci0_init();
+	mv78xx0_ehci1_init();
+	mv78xx0_ehci2_init();
+	mv78xx0_ge00_init(&db78x00_ge00_data);
+	mv78xx0_ge01_init(&db78x00_ge01_data);
+	mv78xx0_sata_init(&db78x00_sata_data);
+	mv78xx0_uart0_init();
+	mv78xx0_uart1_init();
+	mv78xx0_uart2_init();
+	mv78xx0_uart3_init();
+	mv78xx0_i2c_init();
+	i2c_register_board_info(0, &db78x00_i2c_rtc, 1);
+}
+
+static int __init wxl_pci_init(void)
+{
+	if (machine_is_terastation_wxl()) {
+		/*
+		 * Assign the x16 PCIe slot on the board to CPU core
+		 * #0, and let CPU core #1 have the four x1 slots.
+		 */
+		if (mv78xx0_core_index() == 0)
+			mv78xx0_pcie_init(0, 1);
+		else
+			mv78xx0_pcie_init(1, 0);
+	}
+
+	return 0;
+}
+subsys_initcall(wxl_pci_init);
+
+MACHINE_START(TERASTATION_WXL, "Buffalo Nas WXL")
+	/* Maintainer: Sebastien Requiem <sebastien@requiem.fr> */
+	.phys_io	= MV78XX0_REGS_PHYS_BASE,
+	.io_pg_offst	= ((MV78XX0_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= wxl_init,
+	.map_io		= mv78xx0_map_io,
+	.init_irq	= mv78xx0_init_irq,
+	.timer		= &mv78xx0_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mv78xx0/mpp.c b/arch/arm/mach-mv78xx0/mpp.c
new file mode 100644
index 000000000000..354ac514eb89
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/mpp.c
@@ -0,0 +1,96 @@
+/*
+ * arch/arm/mach-mv78x00/mpp.c
+ *
+ * MPP functions for Marvell MV78x00 SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <linux/io.h>
+#include <asm/gpio.h>
+#include <mach/hardware.h>
+#include "common.h"
+#include "mpp.h"
+
+static unsigned int __init mv78xx0_variant(void)
+{
+	u32 dev, rev;
+
+	mv78xx0_pcie_id(&dev, &rev);
+
+	if (dev == MV78100_DEV_ID && rev >= MV78100_REV_A0)
+		return MPP_78100_A0_MASK;
+
+	printk(KERN_ERR "MPP setup: unknown mv78x00 variant "
+			"(dev %#x rev %#x)\n", dev, rev);
+	return 0;
+}
+
+#define MPP_CTRL(i)	(DEV_BUS_VIRT_BASE + (i) * 4)
+#define MPP_NR_REGS	(1 + MPP_MAX/8)
+
+void __init mv78xx0_mpp_conf(unsigned int *mpp_list)
+{
+	u32 mpp_ctrl[MPP_NR_REGS];
+	unsigned int variant_mask;
+	int i;
+
+	variant_mask = mv78xx0_variant();
+	if (!variant_mask)
+		return;
+
+	/* Initialize gpiolib. */
+	orion_gpio_init();
+
+	printk(KERN_DEBUG "initial MPP regs:");
+	for (i = 0; i < MPP_NR_REGS; i++) {
+		mpp_ctrl[i] = readl(MPP_CTRL(i));
+		printk(" %08x", mpp_ctrl[i]);
+	}
+	printk("\n");
+
+	while (*mpp_list) {
+		unsigned int num = MPP_NUM(*mpp_list);
+		unsigned int sel = MPP_SEL(*mpp_list);
+		int shift, gpio_mode;
+
+		if (num > MPP_MAX) {
+			printk(KERN_ERR "mv78xx0_mpp_conf: invalid MPP "
+					"number (%u)\n", num);
+			continue;
+		}
+		if (!(*mpp_list & variant_mask)) {
+			printk(KERN_WARNING
+					"mv78xx0_mpp_conf: requested MPP%u config "
+					"unavailable on this hardware\n", num);
+			continue;
+		}
+
+		shift = (num & 7) << 2;
+		mpp_ctrl[num / 8] &= ~(0xf << shift);
+		mpp_ctrl[num / 8] |= sel << shift;
+
+		gpio_mode = 0;
+		if (*mpp_list & MPP_INPUT_MASK)
+			gpio_mode |= GPIO_INPUT_OK;
+		if (*mpp_list & MPP_OUTPUT_MASK)
+			gpio_mode |= GPIO_OUTPUT_OK;
+		if (sel != 0)
+			gpio_mode = 0;
+		orion_gpio_set_valid(num, gpio_mode);
+
+		mpp_list++;
+	}
+
+	printk(KERN_DEBUG "  final MPP regs:");
+	for (i = 0; i < MPP_NR_REGS; i++) {
+		writel(mpp_ctrl[i], MPP_CTRL(i));
+		printk(" %08x", mpp_ctrl[i]);
+	}
+	printk("\n");
+}
diff --git a/arch/arm/mach-mv78xx0/mpp.h b/arch/arm/mach-mv78xx0/mpp.h
new file mode 100644
index 000000000000..80840b781eaa
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/mpp.h
@@ -0,0 +1,347 @@
+/*
+ * linux/arch/arm/mach-mv78xx0/mpp.h -- Multi Purpose Pins
+ *
+ *
+ * sebastien requiem <sebastien@requiem.fr>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MV78X00_MPP_H
+#define __MV78X00_MPP_H
+
+#define MPP(_num, _sel, _in, _out, _78100_A0) (\
+    /* MPP number */        ((_num) & 0xff) | \
+    /* MPP select value */        (((_sel) & 0xf) << 8) | \
+    /* may be input signal */    ((!!(_in)) << 12) | \
+    /* may be output signal */    ((!!(_out)) << 13) | \
+    /* available on A0 */    ((!!(_78100_A0)) << 14))
+
+#define MPP_NUM(x)    ((x) & 0xff)
+#define MPP_SEL(x)    (((x) >> 8) & 0xf)
+
+                /*   num sel  i  o  78100_A0  */
+
+#define MPP_INPUT_MASK        MPP(0, 0x0, 1, 0, 0)
+#define MPP_OUTPUT_MASK        MPP(0, 0x0, 0, 1, 0)
+
+#define MPP_78100_A0_MASK    MPP(0, 0x0, 0, 0, 1)
+
+#define MPP0_GPIO        MPP(0, 0x0, 1, 1, 1)
+#define MPP0_GE0_COL        MPP(0, 0x1, 1, 0, 1)
+#define MPP0_GE1_TXCLK        MPP(0, 0x2, 0, 1, 1)
+#define MPP0_UNUSED        MPP(0, 0x3, 0, 0, 1)
+
+#define MPP1_GPIO        MPP(1, 0x0, 1, 1, 1)
+#define MPP1_GE0_RXERR        MPP(1, 0x1, 1, 0, 1)
+#define MPP1_GE1_TXCTL        MPP(1, 0x2, 0, 1, 1)
+#define MPP1_UNUSED        MPP(1, 0x3, 0, 0, 1)
+
+#define MPP2_GPIO        MPP(2, 0x0, 1, 1, 1)
+#define MPP2_GE0_CRS        MPP(2, 0x1, 1, 0, 1)
+#define MPP2_GE1_RXCTL        MPP(2, 0x2, 1, 0, 1)
+#define MPP2_UNUSED        MPP(2, 0x3, 0, 0, 1)
+
+#define MPP3_GPIO        MPP(3, 0x0, 1, 1, 1)
+#define MPP3_GE0_TXERR        MPP(3, 0x1, 0, 1, 1)
+#define MPP3_GE1_RXCLK        MPP(3, 0x2, 1, 0, 1)
+#define MPP3_UNUSED        MPP(3, 0x3, 0, 0, 1)
+
+#define MPP4_GPIO        MPP(4, 0x0, 1, 1, 1)
+#define MPP4_GE0_TXD4        MPP(4, 0x1, 0, 1, 1)
+#define MPP4_GE1_TXD0        MPP(4, 0x2, 0, 1, 1)
+#define MPP4_UNUSED        MPP(4, 0x3, 0, 0, 1)
+
+#define MPP5_GPIO        MPP(5, 0x0, 1, 1, 1)
+#define MPP5_GE0_TXD5        MPP(5, 0x1, 0, 1, 1)
+#define MPP5_GE1_TXD1        MPP(5, 0x2, 0, 1, 1)
+#define MPP5_UNUSED        MPP(5, 0x3, 0, 0, 1)
+
+#define MPP6_GPIO        MPP(6, 0x0, 1, 1, 1)
+#define MPP6_GE0_TXD6        MPP(6, 0x1, 0, 1, 1)
+#define MPP6_GE1_TXD2        MPP(6, 0x2, 0, 1, 1)
+#define MPP6_UNUSED        MPP(6, 0x3, 0, 0, 1)
+
+#define MPP7_GPIO        MPP(7, 0x0, 1, 1, 1)
+#define MPP7_GE0_TXD7        MPP(7, 0x1, 0, 1, 1)
+#define MPP7_GE1_TXD3        MPP(7, 0x2, 0, 1, 1)
+#define MPP7_UNUSED        MPP(7, 0x3, 0, 0, 1)
+
+#define MPP8_GPIO        MPP(8, 0x0, 1, 1, 1)
+#define MPP8_GE0_RXD4        MPP(8, 0x1, 1, 0, 1)
+#define MPP8_GE1_RXD0        MPP(8, 0x2, 1, 0, 1)
+#define MPP8_UNUSED        MPP(8, 0x3, 0, 0, 1)
+
+#define MPP9_GPIO        MPP(9, 0x0, 1, 1, 1)
+#define MPP9_GE0_RXD5        MPP(9, 0x1, 1, 0, 1)
+#define MPP9_GE1_RXD1        MPP(9, 0x2, 1, 0, 1)
+#define MPP9_UNUSED        MPP(9, 0x3, 0, 0, 1)
+
+#define MPP10_GPIO        MPP(10, 0x0, 1, 1, 1)
+#define MPP10_GE0_RXD6        MPP(10, 0x1, 1, 0, 1)
+#define MPP10_GE1_RXD2        MPP(10, 0x2, 1, 0, 1)
+#define MPP10_UNUSED        MPP(10, 0x3, 0, 0, 1)
+
+#define MPP11_GPIO        MPP(11, 0x0, 1, 1, 1)
+#define MPP11_GE0_RXD7        MPP(11, 0x1, 1, 0, 1)
+#define MPP11_GE1_RXD3        MPP(11, 0x2, 1, 0, 1)
+#define MPP11_UNUSED        MPP(11, 0x3, 0, 0, 1)
+
+#define MPP12_GPIO        MPP(12, 0x0, 1, 1, 1)
+#define MPP12_M_BB        MPP(12, 0x3, 1, 0, 1)
+#define MPP12_UA0_CTSn        MPP(12, 0x4, 1, 0, 1)
+#define MPP12_NAND_FLASH_REn0    MPP(12, 0x5, 0, 1, 1)
+#define MPP12_TDM0_SCSn        MPP(12, 0X6, 0, 1, 1)
+#define MPP12_UNUSED        MPP(12, 0x1, 0, 0, 1)
+
+#define MPP13_GPIO        MPP(13, 0x0, 1, 1, 1)
+#define MPP13_SYSRST_OUTn    MPP(13, 0x3, 0, 1, 1)
+#define MPP13_UA0_RTSn        MPP(13, 0x4, 0, 1, 1)
+#define MPP13_NAN_FLASH_WEn0    MPP(13, 0x5, 0, 1, 1)
+#define MPP13_TDM_SCLK        MPP(13, 0x6, 0, 1, 1)
+#define MPP13_UNUSED        MPP(13, 0x1, 0, 0, 1)
+
+#define MPP14_GPIO        MPP(14, 0x0, 1, 1, 1)
+#define MPP14_SATA1_ACTn    MPP(14, 0x3, 0, 1, 1)
+#define MPP14_UA1_CTSn        MPP(14, 0x4, 1, 0, 1)
+#define MPP14_NAND_FLASH_REn1    MPP(14, 0x5, 0, 1, 1)
+#define MPP14_TDM_SMOSI        MPP(14, 0x6, 0, 1, 1)
+#define MPP14_UNUSED        MPP(14, 0x1, 0, 0, 1)
+
+#define MPP15_GPIO        MPP(15, 0x0, 1, 1, 1)
+#define MPP15_SATA0_ACTn    MPP(15, 0x3, 0, 1, 1)
+#define MPP15_UA1_RTSn        MPP(15, 0x4, 0, 1, 1)
+#define MPP15_NAND_FLASH_WEn1    MPP(15, 0x5, 0, 1, 1)
+#define MPP15_TDM_SMISO        MPP(15, 0x6, 1, 0, 1)
+#define MPP15_UNUSED        MPP(15, 0x1, 0, 0, 1)
+
+#define MPP16_GPIO        MPP(16, 0x0, 1, 1, 1)
+#define MPP16_SATA1_PRESENTn    MPP(16, 0x3, 0, 1, 1)
+#define MPP16_UA2_TXD        MPP(16, 0x4, 0, 1, 1)
+#define MPP16_NAND_FLASH_REn3    MPP(16, 0x5, 0, 1, 1)
+#define MPP16_TDM_INTn        MPP(16, 0x6, 1, 0, 1)
+#define MPP16_UNUSED        MPP(16, 0x1, 0, 0, 1)
+
+
+#define MPP17_GPIO        MPP(17, 0x0, 1, 1, 1)
+#define MPP17_SATA0_PRESENTn    MPP(17, 0x3, 0, 1, 1)
+#define MPP17_UA2_RXD        MPP(17, 0x4, 1, 0, 1)
+#define MPP17_NAND_FLASH_WEn3    MPP(17, 0x5, 0, 1, 1)
+#define MPP17_TDM_RSTn        MPP(17, 0x6, 0, 1, 1)
+#define MPP17_UNUSED        MPP(17, 0x1, 0, 0, 1)
+
+
+#define MPP18_GPIO        MPP(18, 0x0, 1, 1, 1)
+#define MPP18_UA0_CTSn        MPP(18, 0x4, 1, 0, 1)
+#define MPP18_BOOT_FLASH_REn    MPP(18, 0x5, 0, 1, 1)
+#define MPP18_UNUSED        MPP(18, 0x1, 0, 0, 1)
+
+
+
+#define MPP19_GPIO        MPP(19, 0x0, 1, 1, 1)
+#define MPP19_UA0_CTSn        MPP(19, 0x4, 0, 1, 1)
+#define MPP19_BOOT_FLASH_WEn    MPP(19, 0x5, 0, 1, 1)
+#define MPP19_UNUSED        MPP(19, 0x1, 0, 0, 1)
+
+
+#define MPP20_GPIO        MPP(20, 0x0, 1, 1, 1)
+#define MPP20_UA1_CTSs        MPP(20, 0x4, 1, 0, 1)
+#define MPP20_TDM_PCLK        MPP(20, 0x6, 1, 1, 0)
+#define MPP20_UNUSED        MPP(20, 0x1, 0, 0, 1)
+
+
+
+#define MPP21_GPIO        MPP(21, 0x0, 1, 1, 1)
+#define MPP21_UA1_CTSs        MPP(21, 0x4, 0, 1, 1)
+#define MPP21_TDM_FSYNC        MPP(21, 0x6, 1, 1, 0)
+#define MPP21_UNUSED        MPP(21, 0x1, 0, 0, 1)
+
+
+
+#define MPP22_GPIO        MPP(22, 0x0, 1, 1, 1)
+#define MPP22_UA3_TDX        MPP(22, 0x4, 0, 1, 1)
+#define MPP22_NAND_FLASH_REn2    MPP(22, 0x5, 0, 1, 1)
+#define MPP22_TDM_DRX        MPP(22, 0x6, 1, 0, 1)
+#define MPP22_UNUSED        MPP(22, 0x1, 0, 0, 1)
+
+
+
+#define MPP23_GPIO        MPP(23, 0x0, 1, 1, 1)
+#define MPP23_UA3_RDX        MPP(23, 0x4, 1, 0, 1)
+#define MPP23_NAND_FLASH_WEn2    MPP(23, 0x5, 0, 1, 1)
+#define MPP23_TDM_DTX        MPP(23, 0x6, 0, 1, 1)
+#define MPP23_UNUSED        MPP(23, 0x1, 0, 0, 1)
+
+
+#define MPP24_GPIO        MPP(24, 0x0, 1, 1, 1)
+#define MPP24_UA2_TXD        MPP(24, 0x4, 0, 1, 1)
+#define MPP24_TDM_INTn        MPP(24, 0x6, 1, 0, 1)
+#define MPP24_UNUSED        MPP(24, 0x1, 0, 0, 1)
+
+
+#define MPP25_GPIO        MPP(25, 0x0, 1, 1, 1)
+#define MPP25_UA2_RXD        MPP(25, 0x4, 1, 0, 1)
+#define MPP25_TDM_RSTn        MPP(25, 0x6, 0, 1, 1)
+#define MPP25_UNUSED        MPP(25, 0x1, 0, 0, 1)
+
+
+#define MPP26_GPIO        MPP(26, 0x0, 1, 1, 1)
+#define MPP26_UA2_CTSn        MPP(26, 0x4, 1, 0, 1)
+#define MPP26_TDM_PCLK        MPP(26, 0x6, 1, 1, 1)
+#define MPP26_UNUSED        MPP(26, 0x1, 0, 0, 1)
+
+
+#define MPP27_GPIO        MPP(27, 0x0, 1, 1, 1)
+#define MPP27_UA2_RTSn        MPP(27, 0x4, 0, 1, 1)
+#define MPP27_TDM_FSYNC        MPP(27, 0x6, 1, 1, 1)
+#define MPP27_UNUSED        MPP(27, 0x1, 0, 0, 1)
+
+
+#define MPP28_GPIO        MPP(28, 0x0, 1, 1, 1)
+#define MPP28_UA3_TXD        MPP(28, 0x4, 0, 1, 1)
+#define MPP28_TDM_DRX        MPP(28, 0x6, 1, 0, 1)
+#define MPP28_UNUSED        MPP(28, 0x1, 0, 0, 1)
+
+#define MPP29_GPIO        MPP(29, 0x0, 1, 1, 1)
+#define MPP29_UA3_RXD        MPP(29, 0x4, 1, 0, 1)
+#define MPP29_SYSRST_OUTn    MPP(29, 0x5, 0, 1, 1)
+#define MPP29_TDM_DTX        MPP(29, 0x6, 0, 1, 1)
+#define MPP29_UNUSED        MPP(29, 0x1, 0, 0, 1)
+
+#define MPP30_GPIO        MPP(30, 0x0, 1, 1, 1)
+#define MPP30_UA3_CTSn        MPP(30, 0x4, 1, 0, 1)
+#define MPP30_UNUSED        MPP(30, 0x1, 0, 0, 1)
+
+#define MPP31_GPIO        MPP(31, 0x0, 1, 1, 1)
+#define MPP31_UA3_RTSn        MPP(31, 0x4, 0, 1, 1)
+#define MPP31_TDM1_SCSn        MPP(31, 0x6, 0, 1, 1)
+#define MPP31_UNUSED        MPP(31, 0x1, 0, 0, 1)
+
+
+#define MPP32_GPIO        MPP(32, 0x1, 1, 1, 1)
+#define MPP32_UA3_TDX        MPP(32, 0x4, 0, 1, 1)
+#define MPP32_SYSRST_OUTn    MPP(32, 0x5, 0, 1, 1)
+#define MPP32_TDM0_RXQ        MPP(32, 0x6, 0, 1, 1)
+#define MPP32_UNUSED        MPP(32, 0x3, 0, 0, 1)
+
+
+#define MPP33_GPIO        MPP(33, 0x1, 1, 1, 1)
+#define MPP33_UA3_RDX        MPP(33, 0x4, 1, 0, 1)
+#define MPP33_TDM0_TXQ        MPP(33, 0x6, 0, 1, 1)
+#define MPP33_UNUSED        MPP(33, 0x3, 0, 0, 1)
+
+
+
+#define MPP34_GPIO        MPP(34, 0x1, 1, 1, 1)
+#define MPP34_UA2_TDX        MPP(34, 0x4, 0, 1, 1)
+#define MPP34_TDM1_RXQ        MPP(34, 0x6, 0, 1, 1)
+#define MPP34_UNUSED        MPP(34, 0x3, 0, 0, 1)
+
+
+
+#define MPP35_GPIO        MPP(35, 0x1, 1, 1, 1)
+#define MPP35_UA2_RDX        MPP(35, 0x4, 1, 0, 1)
+#define MPP35_TDM1_TXQ        MPP(35, 0x6, 0, 1, 1)
+#define MPP35_UNUSED        MPP(35, 0x3, 0, 0, 1)
+
+#define MPP36_GPIO        MPP(36, 0x1, 1, 1, 1)
+#define MPP36_UA0_CTSn        MPP(36, 0x2, 1, 0, 1)
+#define MPP36_UA2_TDX        MPP(36, 0x4, 0, 1, 1)
+#define MPP36_TDM0_SCSn        MPP(36, 0x6, 0, 1, 1)
+#define MPP36_UNUSED        MPP(36, 0x3, 0, 0, 1)
+
+
+#define MPP37_GPIO        MPP(37, 0x1, 1, 1, 1)
+#define MPP37_UA0_RTSn        MPP(37, 0x2, 0, 1, 1)
+#define MPP37_UA2_RXD        MPP(37, 0x4, 1, 0, 1)
+#define MPP37_SYSRST_OUTn    MPP(37, 0x5, 0, 1, 1)
+#define MPP37_TDM_SCLK        MPP(37, 0x6, 0, 1, 1)
+#define MPP37_UNUSED        MPP(37, 0x3, 0, 0, 1)
+
+
+
+
+#define MPP38_GPIO        MPP(38, 0x1, 1, 1, 1)
+#define MPP38_UA1_CTSn        MPP(38, 0x2, 1, 0, 1)
+#define MPP38_UA3_TXD        MPP(38, 0x4, 0, 1, 1)
+#define MPP38_SYSRST_OUTn    MPP(38, 0x5, 0, 1, 1)
+#define MPP38_TDM_SMOSI        MPP(38, 0x6, 0, 1, 1)
+#define MPP38_UNUSED        MPP(38, 0x3, 0, 0, 1)
+
+
+
+
+#define MPP39_GPIO        MPP(39, 0x1, 1, 1, 1)
+#define MPP39_UA1_RTSn        MPP(39, 0x2, 0, 1, 1)
+#define MPP39_UA3_RXD        MPP(39, 0x4, 1, 0, 1)
+#define MPP39_SYSRST_OUTn    MPP(39, 0x5, 0, 1, 1)
+#define MPP39_TDM_SMISO        MPP(39, 0x6, 1, 0, 1)
+#define MPP39_UNUSED        MPP(39, 0x3, 0, 0, 1)
+
+
+
+#define MPP40_GPIO        MPP(40, 0x1, 1, 1, 1)
+#define MPP40_TDM_INTn        MPP(40, 0x6, 1, 0, 1)
+#define MPP40_UNUSED        MPP(40, 0x0, 0, 0, 1)
+
+
+
+#define MPP41_GPIO        MPP(41, 0x1, 1, 1, 1)
+#define MPP41_TDM_RSTn        MPP(41, 0x6, 0, 1, 1)
+#define MPP41_UNUSED        MPP(41, 0x0, 0, 0, 1)
+
+
+
+#define MPP42_GPIO        MPP(42, 0x1, 1, 1, 1)
+#define MPP42_TDM_PCLK        MPP(42, 0x6, 1, 1, 1)
+#define MPP42_UNUSED        MPP(42, 0x0, 0, 0, 1)
+
+
+
+#define MPP43_GPIO        MPP(43, 0x1, 1, 1, 1)
+#define MPP43_TDM_FSYNC        MPP(43, 0x6, 1, 1, 1)
+#define MPP43_UNUSED        MPP(43, 0x0, 0, 0, 1)
+
+
+
+#define MPP44_GPIO        MPP(44, 0x1, 1, 1, 1)
+#define MPP44_TDM_DRX        MPP(44, 0x6, 1, 0, 1)
+#define MPP44_UNUSED        MPP(44, 0x0, 0, 0, 1)
+
+
+
+#define MPP45_GPIO        MPP(45, 0x1, 1, 1, 1)
+#define MPP45_SATA0_ACTn    MPP(45, 0x3, 0, 1, 1)
+#define MPP45_TDM_DRX        MPP(45, 0x6, 0, 1, 1)
+#define MPP45_UNUSED        MPP(45, 0x0, 0, 0, 1)
+
+
+#define MPP46_GPIO        MPP(46, 0x1, 1, 1, 1)
+#define MPP46_TDM_SCSn        MPP(46, 0x6, 0, 1, 1)
+#define MPP46_UNUSED        MPP(46, 0x0, 0, 0, 1)
+
+
+#define MPP47_GPIO        MPP(47, 0x1, 1, 1, 1)
+#define MPP47_UNUSED        MPP(47, 0x0, 0, 0, 1)
+
+
+
+#define MPP48_GPIO        MPP(48, 0x1, 1, 1, 1)
+#define MPP48_SATA1_ACTn    MPP(48, 0x3, 0, 1, 1)
+#define MPP48_UNUSED        MPP(48, 0x2, 0, 0, 1)
+
+
+
+#define MPP49_GPIO        MPP(49, 0x1, 1, 1, 1)
+#define MPP49_SATA0_ACTn    MPP(49, 0x3, 0, 1, 1)
+#define MPP49_M_BB        MPP(49, 0x4, 1, 0, 1)
+#define MPP49_UNUSED        MPP(49, 0x2, 0, 0, 1)
+
+
+#define MPP_MAX            49
+
+void mv78xx0_mpp_conf(unsigned int *mpp_list);
+
+#endif
diff --git a/arch/arm/mach-mx1/Makefile b/arch/arm/mach-mx1/Makefile
index 7f86fe073ec6..fc2ddf82441b 100644
--- a/arch/arm/mach-mx1/Makefile
+++ b/arch/arm/mach-mx1/Makefile
@@ -4,11 +4,12 @@
 
 # Object file lists.
 
+EXTRA_CFLAGS += -DIMX_NEEDS_DEPRECATED_SYMBOLS
 obj-y			+= generic.o clock.o devices.o
 
 # Support for CMOS sensor interface
 obj-$(CONFIG_MX1_VIDEO)	+= ksym_mx1.o mx1_camera_fiq.o
 
 # Specific board support
-obj-$(CONFIG_ARCH_MX1ADS) += mx1ads.o
-obj-$(CONFIG_MACH_SCB9328) += scb9328.o
\ No newline at end of file
+obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o
+obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mach-mx1ads.c
index 30f04e56fafe..51f3cfd83db2 100644
--- a/arch/arm/mach-mx1/mx1ads.c
+++ b/arch/arm/mach-mx1/mach-mx1ads.c
@@ -1,5 +1,5 @@
 /*
- * arch/arm/mach-imx/mx1ads.c
+ * arch/arm/mach-imx/mach-mx1ads.c
  *
  * Initially based on:
  *	linux-2.6.7-imx/arch/arm/mach-imx/scb9328.c
@@ -27,7 +27,7 @@
 #include <mach/hardware.h>
 #include <mach/i2c.h>
 #include <mach/imx-uart.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx1.h>
 #include <mach/irqs.h>
 
 #include "devices.h"
@@ -147,7 +147,7 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS")
 	/* Maintainer: Sascha Hauer, Pengutronix */
 	.phys_io	= IMX_IO_PHYS,
 	.io_pg_offst	= (IMX_IO_BASE >> 18) & 0xfffc,
-	.boot_params	= PHYS_OFFSET + 0x100,
+	.boot_params	= MX1_PHYS_OFFSET + 0x100,
 	.map_io		= mx1_map_io,
 	.init_irq	= mx1_init_irq,
 	.timer		= &mx1ads_timer,
@@ -157,7 +157,7 @@ MACHINE_END
 MACHINE_START(MXLADS, "Freescale MXLADS")
 	.phys_io	= IMX_IO_PHYS,
 	.io_pg_offst	= (IMX_IO_BASE >> 18) & 0xfffc,
-	.boot_params	= PHYS_OFFSET + 0x100,
+	.boot_params	= MX1_PHYS_OFFSET + 0x100,
 	.map_io		= mx1_map_io,
 	.init_irq	= mx1_init_irq,
 	.timer		= &mx1ads_timer,
diff --git a/arch/arm/mach-mx1/scb9328.c b/arch/arm/mach-mx1/mach-scb9328.c
index 325d98df6053..7587a7a12460 100644
--- a/arch/arm/mach-mx1/scb9328.c
+++ b/arch/arm/mach-mx1/mach-scb9328.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-mx1/scb9328.c
+ * linux/arch/arm/mach-mx1/mach-scb9328.c
  *
  * Copyright (c) 2004 Sascha Hauer <saschahauer@web.de>
  * Copyright (c) 2006-2008 Juergen Beisert <jbeisert@netscape.net>
@@ -23,7 +23,7 @@
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/imx-uart.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx1.h>
 
 #include "devices.h"
 
diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig
index b96c6a389363..742fd4e6dcb9 100644
--- a/arch/arm/mach-mx2/Kconfig
+++ b/arch/arm/mach-mx2/Kconfig
@@ -37,6 +37,7 @@ config MACH_MX27ADS
 config MACH_PCM038
 	bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
 	depends on MACH_MX27
+	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for phyCORE-i.MX27 (aka pcm038) platform. This
 	  includes specific configurations for the module and its peripherals.
@@ -55,7 +56,7 @@ config MACH_PCM970_BASEBOARD
 
 endchoice
 
-config MACH_EUKREA_CPUIMX27
+config MACH_CPUIMX27
 	bool "Eukrea CPUIMX27 module"
 	depends on MACH_MX27
 	help
@@ -64,14 +65,14 @@ config MACH_EUKREA_CPUIMX27
 
 config MACH_EUKREA_CPUIMX27_USESDHC2
 	bool "CPUIMX27 integrates SDHC2 module"
-	depends on MACH_EUKREA_CPUIMX27
+	depends on MACH_CPUIMX27
 	help
 	  This adds support for the internal SDHC2 used on CPUIMX27 used
 	  for wifi or eMMC.
 
 choice
 	prompt "Baseboard"
-	depends on MACH_EUKREA_CPUIMX27
+	depends on MACH_CPUIMX27
 	default MACH_EUKREA_MBIMX27_BASEBOARD
 
 config MACH_EUKREA_MBIMX27_BASEBOARD
@@ -90,7 +91,7 @@ config MACH_MX27_3DS
 	  Include support for MX27PDK platform. This includes specific
 	  configurations for the board and its peripherals.
 
-config MACH_MX27LITE
+config MACH_IMX27LITE
 	bool "LogicPD MX27 LITEKIT platform"
 	depends on MACH_MX27
 	help
@@ -100,6 +101,7 @@ config MACH_MX27LITE
 config MACH_PCA100
 	bool "Phytec phyCARD-s (pca100)"
 	depends on MACH_MX27
+	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for phyCARD-s (aka pca100) platform. This
 	  includes specific configurations for the module and its peripherals.
diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile
index 52aca0aaf9b5..e3254faac828 100644
--- a/arch/arm/mach-mx2/Makefile
+++ b/arch/arm/mach-mx2/Makefile
@@ -4,21 +4,20 @@
 
 # Object file lists.
 
-obj-y	:=  generic.o devices.o serial.o
+obj-y	:=  devices.o serial.o
 
-obj-$(CONFIG_MACH_MX21) += clock_imx21.o
+obj-$(CONFIG_MACH_MX21) += clock_imx21.o mm-imx21.o
 
 obj-$(CONFIG_MACH_MX27) += cpu_imx27.o
-obj-$(CONFIG_MACH_MX27) += clock_imx27.o
+obj-$(CONFIG_MACH_MX27) += clock_imx27.o mm-imx27.o
 
-obj-$(CONFIG_MACH_MX21ADS) += mx21ads.o
-obj-$(CONFIG_MACH_MX27ADS) += mx27ads.o
-obj-$(CONFIG_MACH_PCM038) += pcm038.o
+obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
+obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
+obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o
 obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
-obj-$(CONFIG_MACH_MX27_3DS) += mx27pdk.o
-obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX27) += eukrea_cpuimx27.o
+obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o
+obj-$(CONFIG_MACH_IMX27LITE) += mach-imx27lite.o
+obj-$(CONFIG_MACH_CPUIMX27) += mach-cpuimx27.o
 obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
-obj-$(CONFIG_MACH_PCA100) += pca100.o
-obj-$(CONFIG_MACH_MXT_TD60) += mxt_td60.o
-
+obj-$(CONFIG_MACH_PCA100) += mach-pca100.o
+obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o
diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c
index e82b489d1215..bb419ef4d133 100644
--- a/arch/arm/mach-mx2/clock_imx21.c
+++ b/arch/arm/mach-mx2/clock_imx21.c
@@ -23,11 +23,242 @@
 #include <linux/module.h>
 
 #include <mach/clock.h>
+#include <mach/hardware.h>
 #include <mach/common.h>
 #include <asm/clkdev.h>
 #include <asm/div64.h>
 
-#include "crm_regs.h"
+#define IO_ADDR_CCM(off)	(MX21_IO_ADDRESS(MX21_CCM_BASE_ADDR + (off)))
+
+/* Register offsets */
+#define CCM_CSCR		IO_ADDR_CCM(0x0)
+#define CCM_MPCTL0		IO_ADDR_CCM(0x4)
+#define CCM_MPCTL1		IO_ADDR_CCM(0x8)
+#define CCM_SPCTL0		IO_ADDR_CCM(0xc)
+#define CCM_SPCTL1		IO_ADDR_CCM(0x10)
+#define CCM_OSC26MCTL		IO_ADDR_CCM(0x14)
+#define CCM_PCDR0		IO_ADDR_CCM(0x18)
+#define CCM_PCDR1		IO_ADDR_CCM(0x1c)
+#define CCM_PCCR0		IO_ADDR_CCM(0x20)
+#define CCM_PCCR1		IO_ADDR_CCM(0x24)
+#define CCM_CCSR		IO_ADDR_CCM(0x28)
+#define CCM_PMCTL		IO_ADDR_CCM(0x2c)
+#define CCM_PMCOUNT		IO_ADDR_CCM(0x30)
+#define CCM_WKGDCTL		IO_ADDR_CCM(0x34)
+
+#define CCM_CSCR_PRESC_OFFSET	29
+#define CCM_CSCR_PRESC_MASK	(0x7 << CCM_CSCR_PRESC_OFFSET)
+
+#define CCM_CSCR_USB_OFFSET	26
+#define CCM_CSCR_USB_MASK	(0x7 << CCM_CSCR_USB_OFFSET)
+#define CCM_CSCR_SD_OFFSET	24
+#define CCM_CSCR_SD_MASK	(0x3 << CCM_CSCR_SD_OFFSET)
+#define CCM_CSCR_SPLLRES	(1 << 22)
+#define CCM_CSCR_MPLLRES	(1 << 21)
+#define CCM_CSCR_SSI2_OFFSET	20
+#define CCM_CSCR_SSI2		(1 << CCM_CSCR_SSI2_OFFSET)
+#define CCM_CSCR_SSI1_OFFSET	19
+#define CCM_CSCR_SSI1		(1 << CCM_CSCR_SSI1_OFFSET)
+#define CCM_CSCR_FIR_OFFSET	18
+#define CCM_CSCR_FIR		(1 << CCM_CSCR_FIR_OFFSET)
+#define CCM_CSCR_SP		(1 << 17)
+#define CCM_CSCR_MCU		(1 << 16)
+#define CCM_CSCR_BCLK_OFFSET	10
+#define CCM_CSCR_BCLK_MASK	(0xf << CCM_CSCR_BCLK_OFFSET)
+#define CCM_CSCR_IPDIV_OFFSET	9
+#define CCM_CSCR_IPDIV		(1 << CCM_CSCR_IPDIV_OFFSET)
+
+#define CCM_CSCR_OSC26MDIV	(1 << 4)
+#define CCM_CSCR_OSC26M		(1 << 3)
+#define CCM_CSCR_FPM		(1 << 2)
+#define CCM_CSCR_SPEN		(1 << 1)
+#define CCM_CSCR_MPEN		1
+
+#define CCM_MPCTL0_CPLM		(1 << 31)
+#define CCM_MPCTL0_PD_OFFSET	26
+#define CCM_MPCTL0_PD_MASK	(0xf << 26)
+#define CCM_MPCTL0_MFD_OFFSET	16
+#define CCM_MPCTL0_MFD_MASK	(0x3ff << 16)
+#define CCM_MPCTL0_MFI_OFFSET	10
+#define CCM_MPCTL0_MFI_MASK	(0xf << 10)
+#define CCM_MPCTL0_MFN_OFFSET	0
+#define CCM_MPCTL0_MFN_MASK	0x3ff
+
+#define CCM_MPCTL1_LF		(1 << 15)
+#define CCM_MPCTL1_BRMO		(1 << 6)
+
+#define CCM_SPCTL0_CPLM		(1 << 31)
+#define CCM_SPCTL0_PD_OFFSET	26
+#define CCM_SPCTL0_PD_MASK	(0xf << 26)
+#define CCM_SPCTL0_MFD_OFFSET	16
+#define CCM_SPCTL0_MFD_MASK	(0x3ff << 16)
+#define CCM_SPCTL0_MFI_OFFSET	10
+#define CCM_SPCTL0_MFI_MASK	(0xf << 10)
+#define CCM_SPCTL0_MFN_OFFSET	0
+#define CCM_SPCTL0_MFN_MASK	0x3ff
+
+#define CCM_SPCTL1_LF		(1 << 15)
+#define CCM_SPCTL1_BRMO		(1 << 6)
+
+#define CCM_OSC26MCTL_PEAK_OFFSET	16
+#define CCM_OSC26MCTL_PEAK_MASK		(0x3 << 16)
+#define CCM_OSC26MCTL_AGC_OFFSET	8
+#define CCM_OSC26MCTL_AGC_MASK		(0x3f << 8)
+#define CCM_OSC26MCTL_ANATEST_OFFSET	0
+#define CCM_OSC26MCTL_ANATEST_MASK	0x3f
+
+#define CCM_PCDR0_SSI2BAUDDIV_OFFSET	26
+#define CCM_PCDR0_SSI2BAUDDIV_MASK	(0x3f << 26)
+#define CCM_PCDR0_SSI1BAUDDIV_OFFSET	16
+#define CCM_PCDR0_SSI1BAUDDIV_MASK	(0x3f << 16)
+#define CCM_PCDR0_NFCDIV_OFFSET		12
+#define CCM_PCDR0_NFCDIV_MASK		(0xf << 12)
+#define CCM_PCDR0_48MDIV_OFFSET		5
+#define CCM_PCDR0_48MDIV_MASK		(0x7 << CCM_PCDR0_48MDIV_OFFSET)
+#define CCM_PCDR0_FIRIDIV_OFFSET	0
+#define CCM_PCDR0_FIRIDIV_MASK		0x1f
+#define CCM_PCDR1_PERDIV4_OFFSET	24
+#define CCM_PCDR1_PERDIV4_MASK		(0x3f << 24)
+#define CCM_PCDR1_PERDIV3_OFFSET	16
+#define CCM_PCDR1_PERDIV3_MASK		(0x3f << 16)
+#define CCM_PCDR1_PERDIV2_OFFSET	8
+#define CCM_PCDR1_PERDIV2_MASK		(0x3f << 8)
+#define CCM_PCDR1_PERDIV1_OFFSET	0
+#define CCM_PCDR1_PERDIV1_MASK		0x3f
+
+#define CCM_PCCR_HCLK_CSI_OFFSET	31
+#define CCM_PCCR_HCLK_CSI_REG		CCM_PCCR0
+#define CCM_PCCR_HCLK_DMA_OFFSET	30
+#define CCM_PCCR_HCLK_DMA_REG		CCM_PCCR0
+#define CCM_PCCR_HCLK_BROM_OFFSET	28
+#define CCM_PCCR_HCLK_BROM_REG		CCM_PCCR0
+#define CCM_PCCR_HCLK_EMMA_OFFSET	27
+#define CCM_PCCR_HCLK_EMMA_REG		CCM_PCCR0
+#define CCM_PCCR_HCLK_LCDC_OFFSET	26
+#define CCM_PCCR_HCLK_LCDC_REG		CCM_PCCR0
+#define CCM_PCCR_HCLK_SLCDC_OFFSET	25
+#define CCM_PCCR_HCLK_SLCDC_REG		CCM_PCCR0
+#define CCM_PCCR_HCLK_USBOTG_OFFSET	24
+#define CCM_PCCR_HCLK_USBOTG_REG	CCM_PCCR0
+#define CCM_PCCR_HCLK_BMI_OFFSET	23
+#define CCM_PCCR_BMI_MASK		(1 << CCM_PCCR_BMI_MASK)
+#define CCM_PCCR_HCLK_BMI_REG		CCM_PCCR0
+#define CCM_PCCR_PERCLK4_OFFSET		22
+#define CCM_PCCR_PERCLK4_REG		CCM_PCCR0
+#define CCM_PCCR_SLCDC_OFFSET		21
+#define CCM_PCCR_SLCDC_REG		CCM_PCCR0
+#define CCM_PCCR_FIRI_BAUD_OFFSET	20
+#define CCM_PCCR_FIRI_BAUD_MASK		(1 << CCM_PCCR_FIRI_BAUD_MASK)
+#define CCM_PCCR_FIRI_BAUD_REG		CCM_PCCR0
+#define CCM_PCCR_NFC_OFFSET		19
+#define CCM_PCCR_NFC_REG		CCM_PCCR0
+#define CCM_PCCR_LCDC_OFFSET		18
+#define CCM_PCCR_LCDC_REG		CCM_PCCR0
+#define CCM_PCCR_SSI1_BAUD_OFFSET	17
+#define CCM_PCCR_SSI1_BAUD_REG		CCM_PCCR0
+#define CCM_PCCR_SSI2_BAUD_OFFSET	16
+#define CCM_PCCR_SSI2_BAUD_REG		CCM_PCCR0
+#define CCM_PCCR_EMMA_OFFSET		15
+#define CCM_PCCR_EMMA_REG		CCM_PCCR0
+#define CCM_PCCR_USBOTG_OFFSET		14
+#define CCM_PCCR_USBOTG_REG		CCM_PCCR0
+#define CCM_PCCR_DMA_OFFSET		13
+#define CCM_PCCR_DMA_REG		CCM_PCCR0
+#define CCM_PCCR_I2C1_OFFSET		12
+#define CCM_PCCR_I2C1_REG		CCM_PCCR0
+#define CCM_PCCR_GPIO_OFFSET		11
+#define CCM_PCCR_GPIO_REG		CCM_PCCR0
+#define CCM_PCCR_SDHC2_OFFSET		10
+#define CCM_PCCR_SDHC2_REG		CCM_PCCR0
+#define CCM_PCCR_SDHC1_OFFSET		9
+#define CCM_PCCR_SDHC1_REG		CCM_PCCR0
+#define CCM_PCCR_FIRI_OFFSET		8
+#define CCM_PCCR_FIRI_MASK		(1 << CCM_PCCR_BAUD_MASK)
+#define CCM_PCCR_FIRI_REG		CCM_PCCR0
+#define CCM_PCCR_SSI2_IPG_OFFSET	7
+#define CCM_PCCR_SSI2_REG		CCM_PCCR0
+#define CCM_PCCR_SSI1_IPG_OFFSET	6
+#define CCM_PCCR_SSI1_REG		CCM_PCCR0
+#define CCM_PCCR_CSPI2_OFFSET		5
+#define	CCM_PCCR_CSPI2_REG		CCM_PCCR0
+#define CCM_PCCR_CSPI1_OFFSET		4
+#define	CCM_PCCR_CSPI1_REG		CCM_PCCR0
+#define CCM_PCCR_UART4_OFFSET		3
+#define CCM_PCCR_UART4_REG		CCM_PCCR0
+#define CCM_PCCR_UART3_OFFSET		2
+#define CCM_PCCR_UART3_REG		CCM_PCCR0
+#define CCM_PCCR_UART2_OFFSET		1
+#define CCM_PCCR_UART2_REG		CCM_PCCR0
+#define CCM_PCCR_UART1_OFFSET		0
+#define CCM_PCCR_UART1_REG		CCM_PCCR0
+
+#define CCM_PCCR_OWIRE_OFFSET		31
+#define CCM_PCCR_OWIRE_REG		CCM_PCCR1
+#define CCM_PCCR_KPP_OFFSET		30
+#define CCM_PCCR_KPP_REG		CCM_PCCR1
+#define CCM_PCCR_RTC_OFFSET		29
+#define CCM_PCCR_RTC_REG		CCM_PCCR1
+#define CCM_PCCR_PWM_OFFSET		28
+#define CCM_PCCR_PWM_REG		CCM_PCCR1
+#define CCM_PCCR_GPT3_OFFSET		27
+#define CCM_PCCR_GPT3_REG		CCM_PCCR1
+#define CCM_PCCR_GPT2_OFFSET		26
+#define CCM_PCCR_GPT2_REG		CCM_PCCR1
+#define CCM_PCCR_GPT1_OFFSET		25
+#define CCM_PCCR_GPT1_REG		CCM_PCCR1
+#define CCM_PCCR_WDT_OFFSET		24
+#define CCM_PCCR_WDT_REG		CCM_PCCR1
+#define CCM_PCCR_CSPI3_OFFSET		23
+#define	CCM_PCCR_CSPI3_REG		CCM_PCCR1
+
+#define CCM_PCCR_CSPI1_MASK		(1 << CCM_PCCR_CSPI1_OFFSET)
+#define CCM_PCCR_CSPI2_MASK		(1 << CCM_PCCR_CSPI2_OFFSET)
+#define CCM_PCCR_CSPI3_MASK		(1 << CCM_PCCR_CSPI3_OFFSET)
+#define CCM_PCCR_DMA_MASK		(1 << CCM_PCCR_DMA_OFFSET)
+#define CCM_PCCR_EMMA_MASK		(1 << CCM_PCCR_EMMA_OFFSET)
+#define CCM_PCCR_GPIO_MASK		(1 << CCM_PCCR_GPIO_OFFSET)
+#define CCM_PCCR_GPT1_MASK		(1 << CCM_PCCR_GPT1_OFFSET)
+#define CCM_PCCR_GPT2_MASK		(1 << CCM_PCCR_GPT2_OFFSET)
+#define CCM_PCCR_GPT3_MASK		(1 << CCM_PCCR_GPT3_OFFSET)
+#define CCM_PCCR_HCLK_BROM_MASK		(1 << CCM_PCCR_HCLK_BROM_OFFSET)
+#define CCM_PCCR_HCLK_CSI_MASK		(1 << CCM_PCCR_HCLK_CSI_OFFSET)
+#define CCM_PCCR_HCLK_DMA_MASK		(1 << CCM_PCCR_HCLK_DMA_OFFSET)
+#define CCM_PCCR_HCLK_EMMA_MASK		(1 << CCM_PCCR_HCLK_EMMA_OFFSET)
+#define CCM_PCCR_HCLK_LCDC_MASK		(1 << CCM_PCCR_HCLK_LCDC_OFFSET)
+#define CCM_PCCR_HCLK_SLCDC_MASK	(1 << CCM_PCCR_HCLK_SLCDC_OFFSET)
+#define CCM_PCCR_HCLK_USBOTG_MASK	(1 << CCM_PCCR_HCLK_USBOTG_OFFSET)
+#define CCM_PCCR_I2C1_MASK		(1 << CCM_PCCR_I2C1_OFFSET)
+#define CCM_PCCR_KPP_MASK		(1 << CCM_PCCR_KPP_OFFSET)
+#define CCM_PCCR_LCDC_MASK		(1 << CCM_PCCR_LCDC_OFFSET)
+#define CCM_PCCR_NFC_MASK		(1 << CCM_PCCR_NFC_OFFSET)
+#define CCM_PCCR_OWIRE_MASK		(1 << CCM_PCCR_OWIRE_OFFSET)
+#define CCM_PCCR_PERCLK4_MASK		(1 << CCM_PCCR_PERCLK4_OFFSET)
+#define CCM_PCCR_PWM_MASK		(1 << CCM_PCCR_PWM_OFFSET)
+#define CCM_PCCR_RTC_MASK		(1 << CCM_PCCR_RTC_OFFSET)
+#define CCM_PCCR_SDHC1_MASK		(1 << CCM_PCCR_SDHC1_OFFSET)
+#define CCM_PCCR_SDHC2_MASK		(1 << CCM_PCCR_SDHC2_OFFSET)
+#define CCM_PCCR_SLCDC_MASK		(1 << CCM_PCCR_SLCDC_OFFSET)
+#define CCM_PCCR_SSI1_BAUD_MASK		(1 << CCM_PCCR_SSI1_BAUD_OFFSET)
+#define CCM_PCCR_SSI1_IPG_MASK		(1 << CCM_PCCR_SSI1_IPG_OFFSET)
+#define CCM_PCCR_SSI2_BAUD_MASK		(1 << CCM_PCCR_SSI2_BAUD_OFFSET)
+#define CCM_PCCR_SSI2_IPG_MASK		(1 << CCM_PCCR_SSI2_IPG_OFFSET)
+#define CCM_PCCR_UART1_MASK		(1 << CCM_PCCR_UART1_OFFSET)
+#define CCM_PCCR_UART2_MASK		(1 << CCM_PCCR_UART2_OFFSET)
+#define CCM_PCCR_UART3_MASK		(1 << CCM_PCCR_UART3_OFFSET)
+#define CCM_PCCR_UART4_MASK		(1 << CCM_PCCR_UART4_OFFSET)
+#define CCM_PCCR_USBOTG_MASK		(1 << CCM_PCCR_USBOTG_OFFSET)
+#define CCM_PCCR_WDT_MASK		(1 << CCM_PCCR_WDT_OFFSET)
+
+#define CCM_CCSR_32KSR		(1 << 15)
+
+#define CCM_CCSR_CLKMODE1	(1 << 9)
+#define CCM_CCSR_CLKMODE0	(1 << 8)
+
+#define CCM_CCSR_CLKOSEL_OFFSET 0
+#define CCM_CCSR_CLKOSEL_MASK	0x1f
+
+#define SYS_FMCR		0x14	/* Functional Muxing Control Reg */
+#define SYS_CHIP_ID		0x00	/* The offset of CHIP ID register */
 
 static int _clk_enable(struct clk *clk)
 {
@@ -1002,6 +1233,7 @@ int __init mx21_clocks_init(unsigned long lref, unsigned long href)
 	clk_enable(&uart_clk[0]);
 #endif
 
-	mxc_timer_init(&gpt_clk[0], IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT1);
+	mxc_timer_init(&gpt_clk[0], MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR),
+			MX21_INT_GPT1);
 	return 0;
 }
diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c
index 18c53a6487fa..0f0823c8b170 100644
--- a/arch/arm/mach-mx2/clock_imx27.c
+++ b/arch/arm/mach-mx2/clock_imx27.c
@@ -29,21 +29,23 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 
+#define IO_ADDR_CCM(off)	(MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR + (off)))
+
 /* Register offsets */
-#define CCM_CSCR                (IO_ADDRESS(CCM_BASE_ADDR) + 0x0)
-#define CCM_MPCTL0              (IO_ADDRESS(CCM_BASE_ADDR) + 0x4)
-#define CCM_MPCTL1              (IO_ADDRESS(CCM_BASE_ADDR) + 0x8)
-#define CCM_SPCTL0              (IO_ADDRESS(CCM_BASE_ADDR) + 0xC)
-#define CCM_SPCTL1              (IO_ADDRESS(CCM_BASE_ADDR) + 0x10)
-#define CCM_OSC26MCTL           (IO_ADDRESS(CCM_BASE_ADDR) + 0x14)
-#define CCM_PCDR0               (IO_ADDRESS(CCM_BASE_ADDR) + 0x18)
-#define CCM_PCDR1               (IO_ADDRESS(CCM_BASE_ADDR) + 0x1c)
-#define CCM_PCCR0               (IO_ADDRESS(CCM_BASE_ADDR) + 0x20)
-#define CCM_PCCR1               (IO_ADDRESS(CCM_BASE_ADDR) + 0x24)
-#define CCM_CCSR                (IO_ADDRESS(CCM_BASE_ADDR) + 0x28)
-#define CCM_PMCTL               (IO_ADDRESS(CCM_BASE_ADDR) + 0x2c)
-#define CCM_PMCOUNT             (IO_ADDRESS(CCM_BASE_ADDR) + 0x30)
-#define CCM_WKGDCTL             (IO_ADDRESS(CCM_BASE_ADDR) + 0x34)
+#define CCM_CSCR		IO_ADDR_CCM(0x0)
+#define CCM_MPCTL0		IO_ADDR_CCM(0x4)
+#define CCM_MPCTL1		IO_ADDR_CCM(0x8)
+#define CCM_SPCTL0		IO_ADDR_CCM(0xc)
+#define CCM_SPCTL1		IO_ADDR_CCM(0x10)
+#define CCM_OSC26MCTL		IO_ADDR_CCM(0x14)
+#define CCM_PCDR0		IO_ADDR_CCM(0x18)
+#define CCM_PCDR1		IO_ADDR_CCM(0x1c)
+#define CCM_PCCR0		IO_ADDR_CCM(0x20)
+#define CCM_PCCR1		IO_ADDR_CCM(0x24)
+#define CCM_CCSR		IO_ADDR_CCM(0x28)
+#define CCM_PMCTL		IO_ADDR_CCM(0x2c)
+#define CCM_PMCOUNT		IO_ADDR_CCM(0x30)
+#define CCM_WKGDCTL		IO_ADDR_CCM(0x34)
 
 #define CCM_CSCR_UPDATE_DIS	(1 << 31)
 #define CCM_CSCR_SSI2		(1 << 23)
@@ -753,7 +755,8 @@ int __init mx27_clocks_init(unsigned long fref)
 	clk_enable(&uart1_clk);
 #endif
 
-	mxc_timer_init(&gpt1_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT1);
+	mxc_timer_init(&gpt1_clk, MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR),
+			MX27_INT_GPT1);
 
 	return 0;
 }
diff --git a/arch/arm/mach-mx2/cpu_imx27.c b/arch/arm/mach-mx2/cpu_imx27.c
index d9e3bf9644c9..d8d3b2d84dc5 100644
--- a/arch/arm/mach-mx2/cpu_imx27.c
+++ b/arch/arm/mach-mx2/cpu_imx27.c
@@ -39,7 +39,8 @@ static void query_silicon_parameter(void)
 	 * the silicon revision very early we read it here to
 	 * avoid any further hooks
 	*/
-	val = __raw_readl(IO_ADDRESS(SYSCTRL_BASE_ADDR) + SYS_CHIP_ID);
+	val = __raw_readl(MX27_IO_ADDRESS(MX27_SYSCTRL_BASE_ADDR
+				+ SYS_CHIP_ID));
 
 	cpu_silicon_rev = (int)(val >> 28);
 	cpu_partnumber = (int)((val >> 12) & 0xFFFF);
diff --git a/arch/arm/mach-mx2/crm_regs.h b/arch/arm/mach-mx2/crm_regs.h
deleted file mode 100644
index 749de76b3f95..000000000000
--- a/arch/arm/mach-mx2/crm_regs.h
+++ /dev/null
@@ -1,258 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ARCH_ARM_MACH_MX2_CRM_REGS_H__
-#define __ARCH_ARM_MACH_MX2_CRM_REGS_H__
-
-#include <mach/hardware.h>
-
-/* Register offsets */
-#define CCM_CSCR                (IO_ADDRESS(CCM_BASE_ADDR) + 0x0)
-#define CCM_MPCTL0              (IO_ADDRESS(CCM_BASE_ADDR) + 0x4)
-#define CCM_MPCTL1              (IO_ADDRESS(CCM_BASE_ADDR) + 0x8)
-#define CCM_SPCTL0              (IO_ADDRESS(CCM_BASE_ADDR) + 0xC)
-#define CCM_SPCTL1              (IO_ADDRESS(CCM_BASE_ADDR) + 0x10)
-#define CCM_OSC26MCTL           (IO_ADDRESS(CCM_BASE_ADDR) + 0x14)
-#define CCM_PCDR0               (IO_ADDRESS(CCM_BASE_ADDR) + 0x18)
-#define CCM_PCDR1               (IO_ADDRESS(CCM_BASE_ADDR) + 0x1c)
-#define CCM_PCCR0               (IO_ADDRESS(CCM_BASE_ADDR) + 0x20)
-#define CCM_PCCR1               (IO_ADDRESS(CCM_BASE_ADDR) + 0x24)
-#define CCM_CCSR                (IO_ADDRESS(CCM_BASE_ADDR) + 0x28)
-#define CCM_PMCTL               (IO_ADDRESS(CCM_BASE_ADDR) + 0x2c)
-#define CCM_PMCOUNT             (IO_ADDRESS(CCM_BASE_ADDR) + 0x30)
-#define CCM_WKGDCTL             (IO_ADDRESS(CCM_BASE_ADDR) + 0x34)
-
-#define CCM_CSCR_PRESC_OFFSET   29
-#define CCM_CSCR_PRESC_MASK     (0x7 << CCM_CSCR_PRESC_OFFSET)
-
-#define CCM_CSCR_USB_OFFSET     26
-#define CCM_CSCR_USB_MASK       (0x7 << CCM_CSCR_USB_OFFSET)
-#define CCM_CSCR_SD_OFFSET      24
-#define CCM_CSCR_SD_MASK        (0x3 << CCM_CSCR_SD_OFFSET)
-#define CCM_CSCR_SPLLRES        (1 << 22)
-#define CCM_CSCR_MPLLRES        (1 << 21)
-#define CCM_CSCR_SSI2_OFFSET    20
-#define CCM_CSCR_SSI2           (1 << CCM_CSCR_SSI2_OFFSET)
-#define CCM_CSCR_SSI1_OFFSET    19
-#define CCM_CSCR_SSI1           (1 << CCM_CSCR_SSI1_OFFSET)
-#define CCM_CSCR_FIR_OFFSET    	18
-#define CCM_CSCR_FIR		(1 << CCM_CSCR_FIR_OFFSET)
-#define CCM_CSCR_SP             (1 << 17)
-#define CCM_CSCR_MCU            (1 << 16)
-#define CCM_CSCR_BCLK_OFFSET	10
-#define CCM_CSCR_BCLK_MASK      (0xf << CCM_CSCR_BCLK_OFFSET)
-#define CCM_CSCR_IPDIV_OFFSET   9
-#define CCM_CSCR_IPDIV          (1 << CCM_CSCR_IPDIV_OFFSET)
-
-#define CCM_CSCR_OSC26MDIV      (1 << 4)
-#define CCM_CSCR_OSC26M         (1 << 3)
-#define CCM_CSCR_FPM            (1 << 2)
-#define CCM_CSCR_SPEN           (1 << 1)
-#define CCM_CSCR_MPEN           1
-
-
-
-#define CCM_MPCTL0_CPLM         (1 << 31)
-#define CCM_MPCTL0_PD_OFFSET    26
-#define CCM_MPCTL0_PD_MASK      (0xf << 26)
-#define CCM_MPCTL0_MFD_OFFSET   16
-#define CCM_MPCTL0_MFD_MASK     (0x3ff << 16)
-#define CCM_MPCTL0_MFI_OFFSET   10
-#define CCM_MPCTL0_MFI_MASK     (0xf << 10)
-#define CCM_MPCTL0_MFN_OFFSET   0
-#define CCM_MPCTL0_MFN_MASK     0x3ff
-
-#define CCM_MPCTL1_LF           (1 << 15)
-#define CCM_MPCTL1_BRMO         (1 << 6)
-
-#define CCM_SPCTL0_CPLM         (1 << 31)
-#define CCM_SPCTL0_PD_OFFSET    26
-#define CCM_SPCTL0_PD_MASK      (0xf << 26)
-#define CCM_SPCTL0_MFD_OFFSET   16
-#define CCM_SPCTL0_MFD_MASK     (0x3ff << 16)
-#define CCM_SPCTL0_MFI_OFFSET   10
-#define CCM_SPCTL0_MFI_MASK     (0xf << 10)
-#define CCM_SPCTL0_MFN_OFFSET   0
-#define CCM_SPCTL0_MFN_MASK     0x3ff
-
-#define CCM_SPCTL1_LF           (1 << 15)
-#define CCM_SPCTL1_BRMO         (1 << 6)
-
-#define CCM_OSC26MCTL_PEAK_OFFSET       16
-#define CCM_OSC26MCTL_PEAK_MASK         (0x3 << 16)
-#define CCM_OSC26MCTL_AGC_OFFSET        8
-#define CCM_OSC26MCTL_AGC_MASK          (0x3f << 8)
-#define CCM_OSC26MCTL_ANATEST_OFFSET    0
-#define CCM_OSC26MCTL_ANATEST_MASK      0x3f
-
-#define CCM_PCDR0_SSI2BAUDDIV_OFFSET    26
-#define CCM_PCDR0_SSI2BAUDDIV_MASK      (0x3f << 26)
-#define CCM_PCDR0_SSI1BAUDDIV_OFFSET    16
-#define CCM_PCDR0_SSI1BAUDDIV_MASK      (0x3f << 16)
-#define CCM_PCDR0_NFCDIV_OFFSET         12
-#define CCM_PCDR0_NFCDIV_MASK           (0xf << 12)
-#define CCM_PCDR0_48MDIV_OFFSET		5
-#define CCM_PCDR0_48MDIV_MASK		(0x7 << CCM_PCDR0_48MDIV_OFFSET)
-#define CCM_PCDR0_FIRIDIV_OFFSET	0
-#define CCM_PCDR0_FIRIDIV_MASK		0x1f
-#define CCM_PCDR1_PERDIV4_OFFSET        24
-#define CCM_PCDR1_PERDIV4_MASK          (0x3f << 24)
-#define CCM_PCDR1_PERDIV3_OFFSET        16
-#define CCM_PCDR1_PERDIV3_MASK          (0x3f << 16)
-#define CCM_PCDR1_PERDIV2_OFFSET        8
-#define CCM_PCDR1_PERDIV2_MASK          (0x3f << 8)
-#define CCM_PCDR1_PERDIV1_OFFSET        0
-#define CCM_PCDR1_PERDIV1_MASK          0x3f
-
-#define CCM_PCCR_HCLK_CSI_OFFSET       	31
-#define CCM_PCCR_HCLK_CSI_REG	        CCM_PCCR0
-#define CCM_PCCR_HCLK_DMA_OFFSET       	30
-#define CCM_PCCR_HCLK_DMA_REG	        CCM_PCCR0
-#define CCM_PCCR_HCLK_BROM_OFFSET      	28
-#define CCM_PCCR_HCLK_BROM_REG	        CCM_PCCR0
-#define CCM_PCCR_HCLK_EMMA_OFFSET      	27
-#define CCM_PCCR_HCLK_EMMA_REG	        CCM_PCCR0
-#define CCM_PCCR_HCLK_LCDC_OFFSET      	26
-#define CCM_PCCR_HCLK_LCDC_REG	        CCM_PCCR0
-#define CCM_PCCR_HCLK_SLCDC_OFFSET     	25
-#define CCM_PCCR_HCLK_SLCDC_REG	        CCM_PCCR0
-#define CCM_PCCR_HCLK_USBOTG_OFFSET    	24
-#define CCM_PCCR_HCLK_USBOTG_REG	CCM_PCCR0
-#define CCM_PCCR_HCLK_BMI_OFFSET    	23
-#define CCM_PCCR_BMI_MASK          	(1 << CCM_PCCR_BMI_MASK)
-#define CCM_PCCR_HCLK_BMI_REG	    	CCM_PCCR0
-#define CCM_PCCR_PERCLK4_OFFSET        	22
-#define CCM_PCCR_PERCLK4_REG	    	CCM_PCCR0
-#define CCM_PCCR_SLCDC_OFFSET          	21
-#define CCM_PCCR_SLCDC_REG		CCM_PCCR0
-#define CCM_PCCR_FIRI_BAUD_OFFSET       20
-#define CCM_PCCR_FIRI_BAUD_MASK         (1 << CCM_PCCR_FIRI_BAUD_MASK)
-#define CCM_PCCR_FIRI_BAUD_REG	        CCM_PCCR0
-#define CCM_PCCR_NFC_OFFSET		19
-#define CCM_PCCR_NFC_REG		CCM_PCCR0
-#define CCM_PCCR_LCDC_OFFSET           	18
-#define CCM_PCCR_LCDC_REG		CCM_PCCR0
-#define CCM_PCCR_SSI1_BAUD_OFFSET      	17
-#define CCM_PCCR_SSI1_BAUD_REG	    	CCM_PCCR0
-#define CCM_PCCR_SSI2_BAUD_OFFSET      	16
-#define CCM_PCCR_SSI2_BAUD_REG	    	CCM_PCCR0
-#define CCM_PCCR_EMMA_OFFSET           	15
-#define CCM_PCCR_EMMA_REG		CCM_PCCR0
-#define CCM_PCCR_USBOTG_OFFSET         	14
-#define CCM_PCCR_USBOTG_REG		CCM_PCCR0
-#define CCM_PCCR_DMA_OFFSET            	13
-#define CCM_PCCR_DMA_REG            	CCM_PCCR0
-#define CCM_PCCR_I2C1_OFFSET           	12
-#define CCM_PCCR_I2C1_REG		CCM_PCCR0
-#define CCM_PCCR_GPIO_OFFSET           	11
-#define CCM_PCCR_GPIO_REG		CCM_PCCR0
-#define CCM_PCCR_SDHC2_OFFSET          	10
-#define CCM_PCCR_SDHC2_REG		CCM_PCCR0
-#define CCM_PCCR_SDHC1_OFFSET          	9
-#define CCM_PCCR_SDHC1_REG		CCM_PCCR0
-#define CCM_PCCR_FIRI_OFFSET		8
-#define CCM_PCCR_FIRI_MASK		(1 << CCM_PCCR_BAUD_MASK)
-#define CCM_PCCR_FIRI_REG		CCM_PCCR0
-#define CCM_PCCR_SSI2_IPG_OFFSET       	7
-#define CCM_PCCR_SSI2_REG		CCM_PCCR0
-#define CCM_PCCR_SSI1_IPG_OFFSET       	6
-#define CCM_PCCR_SSI1_REG		CCM_PCCR0
-#define CCM_PCCR_CSPI2_OFFSET		5
-#define	CCM_PCCR_CSPI2_REG		CCM_PCCR0
-#define CCM_PCCR_CSPI1_OFFSET		4
-#define	CCM_PCCR_CSPI1_REG		CCM_PCCR0
-#define CCM_PCCR_UART4_OFFSET          	3
-#define CCM_PCCR_UART4_REG		CCM_PCCR0
-#define CCM_PCCR_UART3_OFFSET          	2
-#define CCM_PCCR_UART3_REG		CCM_PCCR0
-#define CCM_PCCR_UART2_OFFSET          	1
-#define CCM_PCCR_UART2_REG		CCM_PCCR0
-#define CCM_PCCR_UART1_OFFSET          	0
-#define CCM_PCCR_UART1_REG		CCM_PCCR0
-
-#define CCM_PCCR_OWIRE_OFFSET          	31
-#define CCM_PCCR_OWIRE_REG		CCM_PCCR1
-#define CCM_PCCR_KPP_OFFSET            	30
-#define CCM_PCCR_KPP_REG		CCM_PCCR1
-#define CCM_PCCR_RTC_OFFSET            	29
-#define CCM_PCCR_RTC_REG		CCM_PCCR1
-#define CCM_PCCR_PWM_OFFSET            	28
-#define CCM_PCCR_PWM_REG		CCM_PCCR1
-#define CCM_PCCR_GPT3_OFFSET           	27
-#define CCM_PCCR_GPT3_REG		CCM_PCCR1
-#define CCM_PCCR_GPT2_OFFSET           	26
-#define CCM_PCCR_GPT2_REG		CCM_PCCR1
-#define CCM_PCCR_GPT1_OFFSET           	25
-#define CCM_PCCR_GPT1_REG		CCM_PCCR1
-#define CCM_PCCR_WDT_OFFSET            	24
-#define CCM_PCCR_WDT_REG		CCM_PCCR1
-#define CCM_PCCR_CSPI3_OFFSET		23
-#define	CCM_PCCR_CSPI3_REG		CCM_PCCR1
-
-#define CCM_PCCR_CSPI1_MASK            	(1 << CCM_PCCR_CSPI1_OFFSET)
-#define CCM_PCCR_CSPI2_MASK            	(1 << CCM_PCCR_CSPI2_OFFSET)
-#define CCM_PCCR_CSPI3_MASK            	(1 << CCM_PCCR_CSPI3_OFFSET)
-#define CCM_PCCR_DMA_MASK              	(1 << CCM_PCCR_DMA_OFFSET)
-#define CCM_PCCR_EMMA_MASK             	(1 << CCM_PCCR_EMMA_OFFSET)
-#define CCM_PCCR_GPIO_MASK             	(1 << CCM_PCCR_GPIO_OFFSET)
-#define CCM_PCCR_GPT1_MASK             	(1 << CCM_PCCR_GPT1_OFFSET)
-#define CCM_PCCR_GPT2_MASK             	(1 << CCM_PCCR_GPT2_OFFSET)
-#define CCM_PCCR_GPT3_MASK             	(1 << CCM_PCCR_GPT3_OFFSET)
-#define CCM_PCCR_HCLK_BROM_MASK		(1 << CCM_PCCR_HCLK_BROM_OFFSET)
-#define CCM_PCCR_HCLK_CSI_MASK         	(1 << CCM_PCCR_HCLK_CSI_OFFSET)
-#define CCM_PCCR_HCLK_DMA_MASK         	(1 << CCM_PCCR_HCLK_DMA_OFFSET)
-#define CCM_PCCR_HCLK_EMMA_MASK        	(1 << CCM_PCCR_HCLK_EMMA_OFFSET)
-#define CCM_PCCR_HCLK_LCDC_MASK        	(1 << CCM_PCCR_HCLK_LCDC_OFFSET)
-#define CCM_PCCR_HCLK_SLCDC_MASK       	(1 << CCM_PCCR_HCLK_SLCDC_OFFSET)
-#define CCM_PCCR_HCLK_USBOTG_MASK      	(1 << CCM_PCCR_HCLK_USBOTG_OFFSET)
-#define CCM_PCCR_I2C1_MASK             	(1 << CCM_PCCR_I2C1_OFFSET)
-#define CCM_PCCR_KPP_MASK              	(1 << CCM_PCCR_KPP_OFFSET)
-#define CCM_PCCR_LCDC_MASK             	(1 << CCM_PCCR_LCDC_OFFSET)
-#define CCM_PCCR_NFC_MASK		(1 << CCM_PCCR_NFC_OFFSET)
-#define CCM_PCCR_OWIRE_MASK            	(1 << CCM_PCCR_OWIRE_OFFSET)
-#define CCM_PCCR_PERCLK4_MASK          	(1 << CCM_PCCR_PERCLK4_OFFSET)
-#define CCM_PCCR_PWM_MASK              	(1 << CCM_PCCR_PWM_OFFSET)
-#define CCM_PCCR_RTC_MASK              	(1 << CCM_PCCR_RTC_OFFSET)
-#define CCM_PCCR_SDHC1_MASK            	(1 << CCM_PCCR_SDHC1_OFFSET)
-#define CCM_PCCR_SDHC2_MASK            	(1 << CCM_PCCR_SDHC2_OFFSET)
-#define CCM_PCCR_SLCDC_MASK            	(1 << CCM_PCCR_SLCDC_OFFSET)
-#define CCM_PCCR_SSI1_BAUD_MASK        	(1 << CCM_PCCR_SSI1_BAUD_OFFSET)
-#define CCM_PCCR_SSI1_IPG_MASK         	(1 << CCM_PCCR_SSI1_IPG_OFFSET)
-#define CCM_PCCR_SSI2_BAUD_MASK        	(1 << CCM_PCCR_SSI2_BAUD_OFFSET)
-#define CCM_PCCR_SSI2_IPG_MASK         	(1 << CCM_PCCR_SSI2_IPG_OFFSET)
-#define CCM_PCCR_UART1_MASK            	(1 << CCM_PCCR_UART1_OFFSET)
-#define CCM_PCCR_UART2_MASK            	(1 << CCM_PCCR_UART2_OFFSET)
-#define CCM_PCCR_UART3_MASK            	(1 << CCM_PCCR_UART3_OFFSET)
-#define CCM_PCCR_UART4_MASK            	(1 << CCM_PCCR_UART4_OFFSET)
-#define CCM_PCCR_USBOTG_MASK           	(1 << CCM_PCCR_USBOTG_OFFSET)
-#define CCM_PCCR_WDT_MASK              	(1 << CCM_PCCR_WDT_OFFSET)
-
-
-#define CCM_CCSR_32KSR          (1 << 15)
-
-#define CCM_CCSR_CLKMODE1       (1 << 9)
-#define CCM_CCSR_CLKMODE0       (1 << 8)
-
-#define CCM_CCSR_CLKOSEL_OFFSET 0
-#define CCM_CCSR_CLKOSEL_MASK   0x1f
-
-#define SYS_FMCR                0x14	/*  Functional Muxing Control Reg */
-#define SYS_CHIP_ID             0x00	/* The offset of CHIP ID register */
-
-#endif /* __ARCH_ARM_MACH_MX2_CRM_REGS_H__ */
diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index 3956d82b7c4e..b91e412f7b3e 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -47,65 +47,31 @@
  * - i.MX21: 2 channel
  * - i.MX27: 3 channel
  */
-static struct resource mxc_spi_resources0[] = {
-	{
-	       .start = CSPI1_BASE_ADDR,
-	       .end = CSPI1_BASE_ADDR + SZ_4K - 1,
-	       .flags = IORESOURCE_MEM,
-	}, {
-	       .start = MXC_INT_CSPI1,
-	       .end = MXC_INT_CSPI1,
-	       .flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource mxc_spi_resources1[] = {
-	{
-		.start = CSPI2_BASE_ADDR,
-		.end = CSPI2_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_CSPI2,
-		.end = MXC_INT_CSPI2,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-#ifdef CONFIG_MACH_MX27
-static struct resource mxc_spi_resources2[] = {
-	{
-		.start = CSPI3_BASE_ADDR,
-		.end = CSPI3_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_CSPI3,
-		.end = MXC_INT_CSPI3,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-#endif
-
-struct platform_device mxc_spi_device0 = {
-	.name = "spi_imx",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_spi_resources0),
-	.resource = mxc_spi_resources0,
-};
+#define DEFINE_IMX_SPI_DEVICE(n, baseaddr, irq)					\
+	static struct resource mxc_spi_resources ## n[] = {			\
+		{								\
+			.start = baseaddr,					\
+			.end = baseaddr + SZ_4K - 1,				\
+			.flags = IORESOURCE_MEM,				\
+		}, {								\
+			.start = irq,						\
+			.end = irq,						\
+			.flags = IORESOURCE_IRQ,				\
+		},								\
+	};									\
+										\
+	struct platform_device mxc_spi_device ## n = {				\
+		.name = "spi_imx",						\
+		.id = n,							\
+		.num_resources = ARRAY_SIZE(mxc_spi_resources ## n),		\
+		.resource = mxc_spi_resources ## n,				\
+	}
 
-struct platform_device mxc_spi_device1 = {
-	.name = "spi_imx",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(mxc_spi_resources1),
-	.resource = mxc_spi_resources1,
-};
+DEFINE_IMX_SPI_DEVICE(0, MX2x_CSPI1_BASE_ADDR, MX2x_INT_CSPI1);
+DEFINE_IMX_SPI_DEVICE(1, MX2x_CSPI2_BASE_ADDR, MX2x_INT_CSPI2);
 
 #ifdef CONFIG_MACH_MX27
-struct platform_device mxc_spi_device2 = {
-	.name = "spi_imx",
-	.id = 2,
-	.num_resources = ARRAY_SIZE(mxc_spi_resources2),
-	.resource = mxc_spi_resources2,
-};
+DEFINE_IMX_SPI_DEVICE(2, MX27_CSPI3_BASE_ADDR, MX27_INT_CSPI3);
 #endif
 
 /*
@@ -113,104 +79,34 @@ struct platform_device mxc_spi_device2 = {
  * - i.MX21: 3 timers
  * - i.MX27: 6 timers
  */
-
-/* We use gpt0 as system timer, so do not add a device for this one */
-
-static struct resource timer1_resources[] = {
-	{
-		.start	= GPT2_BASE_ADDR,
-		.end	= GPT2_BASE_ADDR + 0x17,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start   = MXC_INT_GPT2,
-		.end     = MXC_INT_GPT2,
-		.flags   = IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device mxc_gpt1 = {
-	.name = "imx_gpt",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(timer1_resources),
-	.resource = timer1_resources,
-};
-
-static struct resource timer2_resources[] = {
-	{
-		.start	= GPT3_BASE_ADDR,
-		.end	= GPT3_BASE_ADDR + 0x17,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start   = MXC_INT_GPT3,
-		.end     = MXC_INT_GPT3,
-		.flags   = IORESOURCE_IRQ,
+#define DEFINE_IMX_GPT_DEVICE(n, baseaddr, irq)				\
+	static struct resource timer ## n ##_resources[] = {		\
+		{							\
+			.start = baseaddr,				\
+			.end = baseaddr + SZ_4K - 1,			\
+			.flags = IORESOURCE_MEM,			\
+		}, {							\
+			.start = irq,					\
+			.end = irq,					\
+			.flags = IORESOURCE_IRQ,			\
+		}							\
+	};								\
+									\
+	struct platform_device mxc_gpt ## n = {				\
+		.name = "imx_gpt",					\
+		.id = n,						\
+		.num_resources = ARRAY_SIZE(timer ## n ## _resources),	\
+		.resource = timer ## n ## _resources,			\
 	}
-};
 
-struct platform_device mxc_gpt2 = {
-	.name = "imx_gpt",
-	.id = 2,
-	.num_resources = ARRAY_SIZE(timer2_resources),
-	.resource = timer2_resources,
-};
+/* We use gpt1 as system timer, so do not add a device for this one */
+DEFINE_IMX_GPT_DEVICE(1, MX2x_GPT2_BASE_ADDR, MX2x_INT_GPT2);
+DEFINE_IMX_GPT_DEVICE(2, MX2x_GPT3_BASE_ADDR, MX2x_INT_GPT3);
 
 #ifdef CONFIG_MACH_MX27
-static struct resource timer3_resources[] = {
-	{
-		.start	= GPT4_BASE_ADDR,
-		.end	= GPT4_BASE_ADDR + 0x17,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start   = MXC_INT_GPT4,
-		.end     = MXC_INT_GPT4,
-		.flags   = IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device mxc_gpt3 = {
-	.name = "imx_gpt",
-	.id = 3,
-	.num_resources = ARRAY_SIZE(timer3_resources),
-	.resource = timer3_resources,
-};
-
-static struct resource timer4_resources[] = {
-	{
-		.start	= GPT5_BASE_ADDR,
-		.end	= GPT5_BASE_ADDR + 0x17,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start   = MXC_INT_GPT5,
-		.end     = MXC_INT_GPT5,
-		.flags   = IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device mxc_gpt4 = {
-	.name = "imx_gpt",
-	.id = 4,
-	.num_resources = ARRAY_SIZE(timer4_resources),
-	.resource = timer4_resources,
-};
-
-static struct resource timer5_resources[] = {
-	{
-		.start	= GPT6_BASE_ADDR,
-		.end	= GPT6_BASE_ADDR + 0x17,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start   = MXC_INT_GPT6,
-		.end     = MXC_INT_GPT6,
-		.flags   = IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device mxc_gpt5 = {
-	.name = "imx_gpt",
-	.id = 5,
-	.num_resources = ARRAY_SIZE(timer5_resources),
-	.resource = timer5_resources,
-};
+DEFINE_IMX_GPT_DEVICE(3, MX27_GPT4_BASE_ADDR, MX27_INT_GPT4);
+DEFINE_IMX_GPT_DEVICE(4, MX27_GPT5_BASE_ADDR, MX27_INT_GPT5);
+DEFINE_IMX_GPT_DEVICE(5, MX27_GPT6_BASE_ADDR, MX27_INT_GPT6);
 #endif
 
 /*
@@ -221,9 +117,9 @@ struct platform_device mxc_gpt5 = {
  */
 static struct resource mxc_wdt_resources[] = {
 	{
-		.start	= WDOG_BASE_ADDR,
-		.end	= WDOG_BASE_ADDR + 0x30,
-		.flags	= IORESOURCE_MEM,
+		.start = MX2x_WDOG_BASE_ADDR,
+		.end = MX2x_WDOG_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
 	},
 };
 
@@ -236,8 +132,8 @@ struct platform_device mxc_wdt = {
 
 static struct resource mxc_w1_master_resources[] = {
 	{
-		.start = OWIRE_BASE_ADDR,
-		.end   = OWIRE_BASE_ADDR + SZ_4K - 1,
+		.start = MX2x_OWIRE_BASE_ADDR,
+		.end = MX2x_OWIRE_BASE_ADDR + SZ_4K - 1,
 		.flags = IORESOURCE_MEM,
 	},
 };
@@ -249,24 +145,33 @@ struct platform_device mxc_w1_master_device = {
 	.resource = mxc_w1_master_resources,
 };
 
-static struct resource mxc_nand_resources[] = {
-	{
-		.start	= NFC_BASE_ADDR,
-		.end	= NFC_BASE_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= MXC_INT_NANDFC,
-		.end	= MXC_INT_NANDFC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
+#define DEFINE_MXC_NAND_DEVICE(pfx, baseaddr, irq)			\
+	static struct resource pfx ## _nand_resources[] = {		\
+		{							\
+			.start = baseaddr,				\
+			.end = baseaddr + SZ_4K - 1,			\
+			.flags = IORESOURCE_MEM,			\
+		}, {							\
+			.start = irq,					\
+			.end = irq,					\
+			.flags = IORESOURCE_IRQ,			\
+		},							\
+	};								\
+									\
+	struct platform_device pfx ## _nand_device = {			\
+		.name = "mxc_nand",					\
+		.id = 0,						\
+		.num_resources = ARRAY_SIZE(pfx ## _nand_resources),	\
+		.resource = pfx ## _nand_resources,			\
+	}
 
-struct platform_device mxc_nand_device = {
-	.name = "mxc_nand",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_nand_resources),
-	.resource = mxc_nand_resources,
-};
+#ifdef CONFIG_MACH_MX21
+DEFINE_MXC_NAND_DEVICE(imx21, MX21_NFC_BASE_ADDR, MX21_INT_NANDFC);
+#endif
+
+#ifdef CONFIG_MACH_MX27
+DEFINE_MXC_NAND_DEVICE(imx27, MX27_NFC_BASE_ADDR, MX27_INT_NANDFC);
+#endif
 
 /*
  * lcdc:
@@ -276,12 +181,12 @@ struct platform_device mxc_nand_device = {
  */
 static struct resource mxc_fb[] = {
 	{
-		.start = LCDC_BASE_ADDR,
-		.end   = LCDC_BASE_ADDR + 0xFFF,
+		.start = MX2x_LCDC_BASE_ADDR,
+		.end = MX2x_LCDC_BASE_ADDR + SZ_4K - 1,
 		.flags = IORESOURCE_MEM,
 	}, {
-		.start = MXC_INT_LCDC,
-		.end   = MXC_INT_LCDC,
+		.start = MX2x_INT_LCDC,
+		.end = MX2x_INT_LCDC,
 		.flags = IORESOURCE_IRQ,
 	}
 };
@@ -300,13 +205,13 @@ struct platform_device mxc_fb_device = {
 #ifdef CONFIG_MACH_MX27
 static struct resource mxc_fec_resources[] = {
 	{
-		.start	= FEC_BASE_ADDR,
-		.end	= FEC_BASE_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM,
+		.start = MX27_FEC_BASE_ADDR,
+		.end = MX27_FEC_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
 	}, {
-		.start	= MXC_INT_FEC,
-		.end	= MXC_INT_FEC,
-		.flags	= IORESOURCE_IRQ,
+		.start = MX27_INT_FEC,
+		.end = MX27_INT_FEC,
+		.flags = IORESOURCE_IRQ,
 	},
 };
 
@@ -318,55 +223,41 @@ struct platform_device mxc_fec_device = {
 };
 #endif
 
-static struct resource mxc_i2c_1_resources[] = {
-	{
-		.start	= I2C_BASE_ADDR,
-		.end	= I2C_BASE_ADDR + 0x0fff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= MXC_INT_I2C,
-		.end	= MXC_INT_I2C,
-		.flags	= IORESOURCE_IRQ,
+#define DEFINE_IMX_I2C_DEVICE(n, baseaddr, irq)				\
+	static struct resource mxc_i2c_resources ## n[] = {		\
+		{							\
+			.start = baseaddr,				\
+			.end = baseaddr + SZ_4K - 1,			\
+			.flags = IORESOURCE_MEM,			\
+		}, {							\
+			.start = irq,					\
+			.end = irq,					\
+			.flags = IORESOURCE_IRQ,			\
+		}							\
+	};								\
+									\
+	struct platform_device mxc_i2c_device ## n = {			\
+		.name = "imx-i2c",					\
+		.id = n,						\
+		.num_resources = ARRAY_SIZE(mxc_i2c_resources ## n),	\
+		.resource = mxc_i2c_resources ## n,			\
 	}
-};
 
-struct platform_device mxc_i2c_device0 = {
-	.name = "imx-i2c",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_i2c_1_resources),
-	.resource = mxc_i2c_1_resources,
-};
+DEFINE_IMX_I2C_DEVICE(0, MX2x_I2C_BASE_ADDR, MX2x_INT_I2C);
 
 #ifdef CONFIG_MACH_MX27
-static struct resource mxc_i2c_2_resources[] = {
-	{
-		.start	= I2C2_BASE_ADDR,
-		.end	= I2C2_BASE_ADDR + 0x0fff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= MXC_INT_I2C2,
-		.end	= MXC_INT_I2C2,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device mxc_i2c_device1 = {
-	.name = "imx-i2c",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(mxc_i2c_2_resources),
-	.resource = mxc_i2c_2_resources,
-};
+DEFINE_IMX_I2C_DEVICE(1, MX27_I2C2_BASE_ADDR, MX27_INT_I2C2);
 #endif
 
 static struct resource mxc_pwm_resources[] = {
 	{
-		.start	= PWM_BASE_ADDR,
-		.end	= PWM_BASE_ADDR + 0x0fff,
-		.flags	= IORESOURCE_MEM,
+		.start = MX2x_PWM_BASE_ADDR,
+		.end = MX2x_PWM_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
 	}, {
-		.start   = MXC_INT_PWM,
-		.end     = MXC_INT_PWM,
-		.flags   = IORESOURCE_IRQ,
+		.start = MX2x_INT_PWM,
+		.end = MX2x_INT_PWM,
+		.flags = IORESOURCE_IRQ,
 	}
 };
 
@@ -377,77 +268,49 @@ struct platform_device mxc_pwm_device = {
 	.resource = mxc_pwm_resources,
 };
 
-/*
- * Resource definition for the MXC SDHC
- */
-static struct resource mxc_sdhc1_resources[] = {
-	{
-		.start = SDHC1_BASE_ADDR,
-		.end   = SDHC1_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_SDHC1,
-		.end   = MXC_INT_SDHC1,
-		.flags = IORESOURCE_IRQ,
-	}, {
-		.start  = DMA_REQ_SDHC1,
-		.end    = DMA_REQ_SDHC1,
-		.flags  = IORESOURCE_DMA,
-	},
-};
-
-static u64 mxc_sdhc1_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device mxc_sdhc_device0 = {
-	.name           = "mxc-mmc",
-	.id             = 0,
-	.dev            = {
-		.dma_mask = &mxc_sdhc1_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.num_resources  = ARRAY_SIZE(mxc_sdhc1_resources),
-	.resource       = mxc_sdhc1_resources,
-};
-
-static struct resource mxc_sdhc2_resources[] = {
-	{
-		.start = SDHC2_BASE_ADDR,
-		.end   = SDHC2_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_SDHC2,
-		.end   = MXC_INT_SDHC2,
-		.flags = IORESOURCE_IRQ,
-	}, {
-		.start  = DMA_REQ_SDHC2,
-		.end    = DMA_REQ_SDHC2,
-		.flags  = IORESOURCE_DMA,
-	},
-};
-
-static u64 mxc_sdhc2_dmamask = DMA_BIT_MASK(32);
+#define DEFINE_MXC_MMC_DEVICE(n, baseaddr, irq, dmareq)			\
+	static struct resource mxc_sdhc_resources ## n[] = {		\
+		{							\
+			.start = baseaddr,				\
+			.end = baseaddr + SZ_4K - 1,			\
+			.flags = IORESOURCE_MEM,			\
+		}, {							\
+			.start = irq,					\
+			.end = irq,					\
+			.flags = IORESOURCE_IRQ,			\
+		}, {							\
+			.start = dmareq,				\
+			.end = dmareq,					\
+			.flags = IORESOURCE_DMA,			\
+		},							\
+	};								\
+									\
+	static u64 mxc_sdhc ## n ## _dmamask = DMA_BIT_MASK(32);	\
+									\
+	struct platform_device mxc_sdhc_device ## n = {			\
+		.name = "mxc-mmc",					\
+		.id = n,						\
+		.dev = {						\
+			.dma_mask = &mxc_sdhc ## n ## _dmamask,		\
+			.coherent_dma_mask = DMA_BIT_MASK(32),		\
+		},							\
+		.num_resources = ARRAY_SIZE(mxc_sdhc_resources ## n),	\
+		.resource = mxc_sdhc_resources ## n,		\
+	}
 
-struct platform_device mxc_sdhc_device1 = {
-	.name           = "mxc-mmc",
-	.id             = 1,
-	.dev            = {
-		.dma_mask = &mxc_sdhc2_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.num_resources  = ARRAY_SIZE(mxc_sdhc2_resources),
-	.resource       = mxc_sdhc2_resources,
-};
+DEFINE_MXC_MMC_DEVICE(0, MX2x_SDHC1_BASE_ADDR, MX2x_INT_SDHC1, MX2x_DMA_REQ_SDHC1);
+DEFINE_MXC_MMC_DEVICE(1, MX2x_SDHC2_BASE_ADDR, MX2x_INT_SDHC2, MX2x_DMA_REQ_SDHC2);
 
 #ifdef CONFIG_MACH_MX27
 static struct resource otg_resources[] = {
 	{
-		.start	= OTG_BASE_ADDR,
-		.end	= OTG_BASE_ADDR + 0x1ff,
-		.flags	= IORESOURCE_MEM,
+		.start = MX27_USBOTG_BASE_ADDR,
+		.end = MX27_USBOTG_BASE_ADDR + 0x1ff,
+		.flags = IORESOURCE_MEM,
 	}, {
-		.start	= MXC_INT_USB3,
-		.end	= MXC_INT_USB3,
-		.flags	= IORESOURCE_IRQ,
+		.start = MX27_INT_USB3,
+		.end = MX27_INT_USB3,
+		.flags = IORESOURCE_IRQ,
 	},
 };
 
@@ -483,12 +346,12 @@ static u64 usbh1_dmamask = DMA_BIT_MASK(32);
 
 static struct resource mxc_usbh1_resources[] = {
 	{
-		.start = OTG_BASE_ADDR + 0x200,
-		.end = OTG_BASE_ADDR + 0x3ff,
+		.start = MX27_USBOTG_BASE_ADDR + 0x200,
+		.end = MX27_USBOTG_BASE_ADDR + 0x3ff,
 		.flags = IORESOURCE_MEM,
 	}, {
-		.start = MXC_INT_USB1,
-		.end = MXC_INT_USB1,
+		.start = MX27_INT_USB1,
+		.end = MX27_INT_USB1,
 		.flags = IORESOURCE_IRQ,
 	},
 };
@@ -509,12 +372,12 @@ static u64 usbh2_dmamask = DMA_BIT_MASK(32);
 
 static struct resource mxc_usbh2_resources[] = {
 	{
-		.start = OTG_BASE_ADDR + 0x400,
-		.end = OTG_BASE_ADDR + 0x5ff,
+		.start = MX27_USBOTG_BASE_ADDR + 0x400,
+		.end = MX27_USBOTG_BASE_ADDR + 0x5ff,
 		.flags = IORESOURCE_MEM,
 	}, {
-		.start = MXC_INT_USB2,
-		.end = MXC_INT_USB2,
+		.start = MX27_INT_USB2,
+		.end = MX27_INT_USB2,
 		.flags = IORESOURCE_IRQ,
 	},
 };
@@ -531,129 +394,102 @@ struct platform_device mxc_usbh2 = {
 };
 #endif
 
-static struct resource imx_ssi_resources0[] = {
-	{
-		.start	= SSI1_BASE_ADDR,
-		.end	= SSI1_BASE_ADDR + 0x6F,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= MXC_INT_SSI1,
-		.end	= MXC_INT_SSI1,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.name	= "tx0",
-		.start	= DMA_REQ_SSI1_TX0,
-		.end	= DMA_REQ_SSI1_TX0,
-		.flags	= IORESOURCE_DMA,
-	}, {
-		.name	= "rx0",
-		.start	= DMA_REQ_SSI1_RX0,
-		.end	= DMA_REQ_SSI1_RX0,
-		.flags	= IORESOURCE_DMA,
-	}, {
-		.name	= "tx1",
-		.start	= DMA_REQ_SSI1_TX1,
-		.end	= DMA_REQ_SSI1_TX1,
-		.flags	= IORESOURCE_DMA,
-	}, {
-		.name	= "rx1",
-		.start	= DMA_REQ_SSI1_RX1,
-		.end	= DMA_REQ_SSI1_RX1,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct resource imx_ssi_resources1[] = {
-	{
-		.start	= SSI2_BASE_ADDR,
-		.end	= SSI2_BASE_ADDR + 0x6F,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= MXC_INT_SSI2,
-		.end	= MXC_INT_SSI2,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.name	= "tx0",
-		.start	= DMA_REQ_SSI2_TX0,
-		.end	= DMA_REQ_SSI2_TX0,
-		.flags	= IORESOURCE_DMA,
-	}, {
-		.name	= "rx0",
-		.start	= DMA_REQ_SSI2_RX0,
-		.end	= DMA_REQ_SSI2_RX0,
-		.flags	= IORESOURCE_DMA,
-	}, {
-		.name	= "tx1",
-		.start	= DMA_REQ_SSI2_TX1,
-		.end	= DMA_REQ_SSI2_TX1,
-		.flags	= IORESOURCE_DMA,
-	}, {
-		.name	= "rx1",
-		.start	= DMA_REQ_SSI2_RX1,
-		.end	= DMA_REQ_SSI2_RX1,
-		.flags	= IORESOURCE_DMA,
-	},
-};
+#define DEFINE_IMX_SSI_DMARES(_name, ssin, suffix)			\
+	{								\
+		.name = _name,						\
+		.start = MX2x_DMA_REQ_SSI ## ssin ## _ ## suffix,	\
+		.end = MX2x_DMA_REQ_SSI ## ssin ## _ ## suffix,		\
+		.flags = IORESOURCE_DMA,				\
+	}
 
-struct platform_device imx_ssi_device0 = {
-	.name = "imx-ssi",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(imx_ssi_resources0),
-	.resource = imx_ssi_resources0,
-};
+#define DEFINE_IMX_SSI_DEVICE(n, ssin, baseaddr, irq)			\
+	static struct resource imx_ssi_resources ## n[] = {		\
+		{							\
+			.start = MX2x_SSI ## ssin ## _BASE_ADDR,	\
+			.end = MX2x_SSI ## ssin ## _BASE_ADDR + 0x6f,	\
+			.flags = IORESOURCE_MEM,			\
+		}, {							\
+			.start = MX2x_INT_SSI1,				\
+			.end = MX2x_INT_SSI1,				\
+			.flags = IORESOURCE_IRQ,			\
+		},							\
+		DEFINE_IMX_SSI_DMARES("tx0", ssin, TX0),		\
+		DEFINE_IMX_SSI_DMARES("rx0", ssin, RX0),		\
+		DEFINE_IMX_SSI_DMARES("tx1", ssin, TX1),		\
+		DEFINE_IMX_SSI_DMARES("rx1", ssin, RX1),		\
+	};								\
+									\
+	struct platform_device imx_ssi_device ## n = {			\
+		.name = "imx-ssi",					\
+		.id = n,						\
+		.num_resources = ARRAY_SIZE(imx_ssi_resources ## n),	\
+		.resource = imx_ssi_resources ## n,			\
+	}
 
-struct platform_device imx_ssi_device1 = {
-	.name = "imx-ssi",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(imx_ssi_resources1),
-	.resource = imx_ssi_resources1,
-};
+DEFINE_IMX_SSI_DEVICE(0, 1, MX2x_SSI1_BASE_ADDR, MX2x_INT_SSI1);
+DEFINE_IMX_SSI_DEVICE(1, 2, MX2x_SSI1_BASE_ADDR, MX2x_INT_SSI1);
 
 /* GPIO port description */
-static struct mxc_gpio_port imx_gpio_ports[] = {
-	{
-		.chip.label = "gpio-0",
-		.irq = MXC_INT_GPIO,
-		.base = IO_ADDRESS(GPIO_BASE_ADDR),
-		.virtual_irq_start = MXC_GPIO_IRQ_START,
-	}, {
-		.chip.label = "gpio-1",
-		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x100),
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
-	}, {
-		.chip.label = "gpio-2",
-		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x200),
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
-	}, {
-		.chip.label = "gpio-3",
-		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x300),
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
-	}, {
-		.chip.label = "gpio-4",
-		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x400),
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 128,
-	}, {
-		.chip.label = "gpio-5",
-		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x500),
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 160,
+#define DEFINE_MXC_GPIO_PORT_IRQ(SOC, n, _irq)				\
+	{								\
+		.chip.label = "gpio-" #n,				\
+		.irq = _irq,						\
+		.base = SOC ## _IO_ADDRESS(MX2x_GPIO_BASE_ADDR +	\
+				n * 0x100),				\
+		.virtual_irq_start = MXC_GPIO_IRQ_START + n * 32,	\
 	}
-};
+
+#define DEFINE_MXC_GPIO_PORT(SOC, n)					\
+	{								\
+		.chip.label = "gpio-" #n,				\
+		.base = SOC ## _IO_ADDRESS(MX2x_GPIO_BASE_ADDR +	\
+				n * 0x100),				\
+		.virtual_irq_start = MXC_GPIO_IRQ_START + n * 32,	\
+	}
+
+#define DEFINE_MXC_GPIO_PORTS(SOC, pfx)					\
+	static struct mxc_gpio_port pfx ## _gpio_ports[] = {		\
+		DEFINE_MXC_GPIO_PORT_IRQ(SOC, 0, SOC ## _INT_GPIO),	\
+		DEFINE_MXC_GPIO_PORT(SOC, 1),				\
+		DEFINE_MXC_GPIO_PORT(SOC, 2),				\
+		DEFINE_MXC_GPIO_PORT(SOC, 3),				\
+		DEFINE_MXC_GPIO_PORT(SOC, 4),				\
+		DEFINE_MXC_GPIO_PORT(SOC, 5),				\
+	}
+
+#ifdef CONFIG_MACH_MX21
+DEFINE_MXC_GPIO_PORTS(MX21, imx21);
+#endif
+
+#ifdef CONFIG_MACH_MX27
+DEFINE_MXC_GPIO_PORTS(MX27, imx27);
+#endif
 
 int __init mxc_register_gpios(void)
 {
-	return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
+#ifdef CONFIG_MACH_MX21
+	if (cpu_is_mx21())
+		return mxc_gpio_init(imx21_gpio_ports, ARRAY_SIZE(imx21_gpio_ports));
+	else
+#endif
+#ifdef CONFIG_MACH_MX27
+	if (cpu_is_mx27())
+		return mxc_gpio_init(imx27_gpio_ports, ARRAY_SIZE(imx27_gpio_ports));
+	else
+#endif
+		return 0;
 }
 
 #ifdef CONFIG_MACH_MX21
 static struct resource mx21_usbhc_resources[] = {
 	{
-		.start	= USBOTG_BASE_ADDR,
-		.end	= USBOTG_BASE_ADDR + 0x1FFF,
+		.start	= MX21_BASE_ADDR,
+		.end	= MX21_BASE_ADDR + 0x1FFF,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.start		= MXC_INT_USBHOST,
-		.end		= MXC_INT_USBHOST,
+		.start		= MX21_INT_USBHOST,
+		.end		= MX21_INT_USBHOST,
 		.flags		= IORESOURCE_IRQ,
 	},
 };
diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-mx2/devices.h
index f12694b07369..84ed51380174 100644
--- a/arch/arm/mach-mx2/devices.h
+++ b/arch/arm/mach-mx2/devices.h
@@ -1,8 +1,10 @@
 extern struct platform_device mxc_gpt1;
 extern struct platform_device mxc_gpt2;
+#ifdef CONFIG_MACH_MX27
 extern struct platform_device mxc_gpt3;
 extern struct platform_device mxc_gpt4;
 extern struct platform_device mxc_gpt5;
+#endif
 extern struct platform_device mxc_wdt;
 extern struct platform_device mxc_uart_device0;
 extern struct platform_device mxc_uart_device1;
@@ -11,12 +13,19 @@ extern struct platform_device mxc_uart_device3;
 extern struct platform_device mxc_uart_device4;
 extern struct platform_device mxc_uart_device5;
 extern struct platform_device mxc_w1_master_device;
-extern struct platform_device mxc_nand_device;
+#ifdef CONFIG_MACH_MX21
+extern struct platform_device imx21_nand_device;
+#endif
+#ifdef CONFIG_MACH_MX27
+extern struct platform_device imx27_nand_device;
+#endif
 extern struct platform_device mxc_fb_device;
 extern struct platform_device mxc_fec_device;
 extern struct platform_device mxc_pwm_device;
 extern struct platform_device mxc_i2c_device0;
+#ifdef CONFIG_MACH_MX27
 extern struct platform_device mxc_i2c_device1;
+#endif
 extern struct platform_device mxc_sdhc_device0;
 extern struct platform_device mxc_sdhc_device1;
 extern struct platform_device mxc_otg_udc_device;
@@ -25,7 +34,9 @@ extern struct platform_device mxc_usbh1;
 extern struct platform_device mxc_usbh2;
 extern struct platform_device mxc_spi_device0;
 extern struct platform_device mxc_spi_device1;
+#ifdef CONFIG_MACH_MX27
 extern struct platform_device mxc_spi_device2;
+#endif
 extern struct platform_device mx21_usbhc_device;
 extern struct platform_device imx_ssi_device0;
 extern struct platform_device imx_ssi_device1;
diff --git a/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c b/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
index 7382b6d27ee1..f3b169d5245f 100644
--- a/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
+++ b/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
@@ -28,7 +28,7 @@
 #include <asm/mach/arch.h>
 
 #include <mach/common.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx27.h>
 #include <mach/imxfb.h>
 #include <mach/hardware.h>
 #include <mach/mmc.h>
diff --git a/arch/arm/mach-mx2/eukrea_cpuimx27.c b/arch/arm/mach-mx2/mach-cpuimx27.c
index 7b187606682c..1f616dcaabc9 100644
--- a/arch/arm/mach-mx2/eukrea_cpuimx27.c
+++ b/arch/arm/mach-mx2/mach-cpuimx27.c
@@ -36,7 +36,7 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/i2c.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx27.h>
 #include <mach/imx-uart.h>
 #include <mach/mxc_nand.h>
 
@@ -142,28 +142,28 @@ static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = {
 #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
 static struct plat_serial8250_port serial_platform_data[] = {
 	{
-		.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x200000),
+		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x200000),
 		.irq = IRQ_GPIOB(23),
 		.uartclk = 14745600,
 		.regshift = 1,
 		.iotype = UPIO_MEM,
 		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
 	}, {
-		.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x400000),
+		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x400000),
 		.irq = IRQ_GPIOB(22),
 		.uartclk = 14745600,
 		.regshift = 1,
 		.iotype = UPIO_MEM,
 		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
 	}, {
-		.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x800000),
+		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x800000),
 		.irq = IRQ_GPIOB(27),
 		.uartclk = 14745600,
 		.regshift = 1,
 		.iotype = UPIO_MEM,
 		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
 	}, {
-		.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x1000000),
+		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x1000000),
 		.irq = IRQ_GPIOB(30),
 		.uartclk = 14745600,
 		.regshift = 1,
@@ -189,7 +189,8 @@ static void __init eukrea_cpuimx27_init(void)
 
 	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
 
-	mxc_register_device(&mxc_nand_device, &eukrea_cpuimx27_nand_board_info);
+	mxc_register_device(&imx27_nand_device,
+			&eukrea_cpuimx27_nand_board_info);
 
 	i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices,
 				ARRAY_SIZE(eukrea_cpuimx27_i2c_devices));
@@ -224,9 +225,9 @@ static struct sys_timer eukrea_cpuimx27_timer = {
 };
 
 MACHINE_START(CPUIMX27, "EUKREA CPUIMX27")
-	.phys_io        = AIPI_BASE_ADDR,
-	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
+	.phys_io        = MX27_AIPI_BASE_ADDR,
+	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = MX27_PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
 	.init_irq       = mx27_init_irq,
 	.init_machine   = eukrea_cpuimx27_init,
diff --git a/arch/arm/mach-mx2/mx27lite.c b/arch/arm/mach-mx2/mach-imx27lite.c
index 82ea227ea0cf..b5710bf18b96 100644
--- a/arch/arm/mach-mx2/mx27lite.c
+++ b/arch/arm/mach-mx2/mach-imx27lite.c
@@ -27,7 +27,7 @@
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/imx-uart.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx27.h>
 #include <mach/board-mx27lite.h>
 
 #include "devices.h"
@@ -85,9 +85,9 @@ static struct sys_timer mx27lite_timer = {
 };
 
 MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
-	.phys_io        = AIPI_BASE_ADDR,
-	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
+	.phys_io        = MX27_AIPI_BASE_ADDR,
+	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = MX27_PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
 	.init_irq       = mx27_init_irq,
 	.init_machine   = mx27lite_init,
diff --git a/arch/arm/mach-mx2/mx21ads.c b/arch/arm/mach-mx2/mach-mx21ads.c
index cf5f77cbc2f1..113e58d7cb40 100644
--- a/arch/arm/mach-mx2/mx21ads.c
+++ b/arch/arm/mach-mx2/mach-mx21ads.c
@@ -30,7 +30,7 @@
 #include <asm/mach/map.h>
 #include <mach/imx-uart.h>
 #include <mach/imxfb.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx21.h>
 #include <mach/mxc_nand.h>
 #include <mach/mmc.h>
 #include <mach/board-mx21ads.h>
@@ -118,8 +118,8 @@ static struct physmap_flash_data mx21ads_flash_data = {
 };
 
 static struct resource mx21ads_flash_resource = {
-	.start = CS0_BASE_ADDR,
-	.end = CS0_BASE_ADDR + 0x02000000 - 1,
+	.start = MX21_CS0_BASE_ADDR,
+	.end = MX21_CS0_BASE_ADDR + 0x02000000 - 1,
 	.flags = IORESOURCE_MEM,
 };
 
@@ -242,7 +242,7 @@ static struct map_desc mx21ads_io_desc[] __initdata = {
 	 */
 	{
 		.virtual = MX21ADS_MMIO_BASE_ADDR,
-		.pfn = __phys_to_pfn(CS1_BASE_ADDR),
+		.pfn = __phys_to_pfn(MX21_CS1_BASE_ADDR),
 		.length = MX21ADS_MMIO_SIZE,
 		.type = MT_DEVICE,
 	},
@@ -268,7 +268,7 @@ static void __init mx21ads_board_init(void)
 	mxc_register_device(&mxc_uart_device3, &uart_pdata);
 	mxc_register_device(&mxc_fb_device, &mx21ads_fb_data);
 	mxc_register_device(&mxc_sdhc_device0, &mx21ads_sdhc_pdata);
-	mxc_register_device(&mxc_nand_device, &mx21ads_nand_board_info);
+	mxc_register_device(&imx21_nand_device, &mx21ads_nand_board_info);
 
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 }
@@ -284,9 +284,9 @@ static struct sys_timer mx21ads_timer = {
 
 MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
 	/* maintainer: Freescale Semiconductor, Inc. */
-	.phys_io        = AIPI_BASE_ADDR,
-	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
+	.phys_io        = MX21_AIPI_BASE_ADDR,
+	.io_pg_offst    = ((MX21_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = MX21_PHYS_OFFSET + 0x100,
 	.map_io         = mx21ads_map_io,
 	.init_irq       = mx21_init_irq,
 	.init_machine   = mx21ads_board_init,
diff --git a/arch/arm/mach-mx2/mx27pdk.c b/arch/arm/mach-mx2/mach-mx27_3ds.c
index 6761d1b79e43..b2f4e0db3fb3 100644
--- a/arch/arm/mach-mx2/mx27pdk.c
+++ b/arch/arm/mach-mx2/mach-mx27_3ds.c
@@ -26,7 +26,7 @@
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/imx-uart.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx27.h>
 #include <mach/board-mx27pdk.h>
 
 #include "devices.h"
@@ -85,9 +85,9 @@ static struct sys_timer mx27pdk_timer = {
 
 MACHINE_START(MX27_3DS, "Freescale MX27PDK")
 	/* maintainer: Freescale Semiconductor, Inc. */
-	.phys_io        = AIPI_BASE_ADDR,
-	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
+	.phys_io        = MX27_AIPI_BASE_ADDR,
+	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = MX27_PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
 	.init_irq       = mx27_init_irq,
 	.init_machine   = mx27pdk_init,
diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mach-mx27ads.c
index 83e412b713e6..6ce323669e58 100644
--- a/arch/arm/mach-mx2/mx27ads.c
+++ b/arch/arm/mach-mx2/mach-mx27ads.c
@@ -33,7 +33,7 @@
 #include <asm/mach/map.h>
 #include <mach/gpio.h>
 #include <mach/imx-uart.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx27.h>
 #include <mach/board-mx27ads.h>
 #include <mach/mxc_nand.h>
 #include <mach/i2c.h>
@@ -290,7 +290,7 @@ static void __init mx27ads_board_init(void)
 	mxc_register_device(&mxc_uart_device3, &uart_pdata[3]);
 	mxc_register_device(&mxc_uart_device4, &uart_pdata[4]);
 	mxc_register_device(&mxc_uart_device5, &uart_pdata[5]);
-	mxc_register_device(&mxc_nand_device, &mx27ads_nand_board_info);
+	mxc_register_device(&imx27_nand_device, &mx27ads_nand_board_info);
 
 	/* only the i2c master 1 is used on this CPU card */
 	i2c_register_board_info(1, mx27ads_i2c_devices,
@@ -320,7 +320,7 @@ static struct sys_timer mx27ads_timer = {
 static struct map_desc mx27ads_io_desc[] __initdata = {
 	{
 		.virtual = PBC_BASE_ADDRESS,
-		.pfn = __phys_to_pfn(CS4_BASE_ADDR),
+		.pfn = __phys_to_pfn(MX27_CS4_BASE_ADDR),
 		.length = SZ_1M,
 		.type = MT_DEVICE,
 	},
@@ -334,9 +334,9 @@ static void __init mx27ads_map_io(void)
 
 MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
 	/* maintainer: Freescale Semiconductor, Inc. */
-	.phys_io        = AIPI_BASE_ADDR,
-	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
+	.phys_io        = MX27_AIPI_BASE_ADDR,
+	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = MX27_PHYS_OFFSET + 0x100,
 	.map_io         = mx27ads_map_io,
 	.init_irq       = mx27_init_irq,
 	.init_machine   = mx27ads_board_init,
diff --git a/arch/arm/mach-mx2/mxt_td60.c b/arch/arm/mach-mx2/mach-mxt_td60.c
index 8bcc1a5b8829..bc3855992677 100644
--- a/arch/arm/mach-mx2/mxt_td60.c
+++ b/arch/arm/mach-mx2/mach-mxt_td60.c
@@ -33,7 +33,7 @@
 #include <asm/mach/map.h>
 #include <linux/gpio.h>
 #include <mach/imx-uart.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx27.h>
 #include <mach/mxc_nand.h>
 #include <mach/i2c.h>
 #include <linux/i2c/pca953x.h>
@@ -257,7 +257,7 @@ static void __init mxt_td60_board_init(void)
 	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
 	mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
 	mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
-	mxc_register_device(&mxc_nand_device, &mxt_td60_nand_board_info);
+	mxc_register_device(&imx27_nand_device, &mxt_td60_nand_board_info);
 
 	i2c_register_board_info(0, mxt_td60_i2c_devices,
 				ARRAY_SIZE(mxt_td60_i2c_devices));
@@ -284,9 +284,9 @@ static struct sys_timer mxt_td60_timer = {
 
 MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60")
 	/* maintainer: Maxtrack Industrial */
-	.phys_io	= AIPI_BASE_ADDR,
-	.io_pg_offst	= ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params	= PHYS_OFFSET + 0x100,
+	.phys_io	= MX27_AIPI_BASE_ADDR,
+	.io_pg_offst	= ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params	= MX27_PHYS_OFFSET + 0x100,
 	.map_io		= mx27_map_io,
 	.init_irq	= mx27_init_irq,
 	.init_machine	= mxt_td60_board_init,
diff --git a/arch/arm/mach-mx2/pca100.c b/arch/arm/mach-mx2/mach-pca100.c
index aea3d340d2e1..778fff230918 100644
--- a/arch/arm/mach-mx2/pca100.c
+++ b/arch/arm/mach-mx2/mach-pca100.c
@@ -25,25 +25,36 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/eeprom.h>
 #include <linux/irq.h>
+#include <linux/delay.h>
 #include <linux/gpio.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/fsl_devices.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 #include <mach/common.h>
 #include <mach/hardware.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx27.h>
 #include <mach/i2c.h>
 #include <asm/mach/time.h>
 #if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
 #include <mach/spi.h>
 #endif
 #include <mach/imx-uart.h>
+#include <mach/audmux.h>
+#include <mach/ssi.h>
 #include <mach/mxc_nand.h>
 #include <mach/irqs.h>
 #include <mach/mmc.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
 
 #include "devices.h"
 
+#define OTG_PHY_CS_GPIO (GPIO_PORTB + 23)
+#define USBH2_PHY_CS_GPIO (GPIO_PORTB + 24)
+
 static int pca100_pins[] = {
 	/* UART1 */
 	PE12_PF_UART1_TXD,
@@ -92,6 +103,34 @@ static int pca100_pins[] = {
 	PD29_PF_CSPI1_SCLK,
 	PD30_PF_CSPI1_MISO,
 	PD31_PF_CSPI1_MOSI,
+	/* OTG */
+	OTG_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT,
+	PC7_PF_USBOTG_DATA5,
+	PC8_PF_USBOTG_DATA6,
+	PC9_PF_USBOTG_DATA0,
+	PC10_PF_USBOTG_DATA2,
+	PC11_PF_USBOTG_DATA1,
+	PC12_PF_USBOTG_DATA4,
+	PC13_PF_USBOTG_DATA3,
+	PE0_PF_USBOTG_NXT,
+	PE1_PF_USBOTG_STP,
+	PE2_PF_USBOTG_DIR,
+	PE24_PF_USBOTG_CLK,
+	PE25_PF_USBOTG_DATA7,
+	/* USBH2 */
+	USBH2_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT,
+	PA0_PF_USBH2_CLK,
+	PA1_PF_USBH2_DIR,
+	PA2_PF_USBH2_DATA7,
+	PA3_PF_USBH2_NXT,
+	PA4_PF_USBH2_STP,
+	PD19_AF_USBH2_DATA4,
+	PD20_AF_USBH2_DATA3,
+	PD21_AF_USBH2_DATA6,
+	PD22_AF_USBH2_DATA0,
+	PD23_AF_USBH2_DATA2,
+	PD24_AF_USBH2_DATA1,
+	PD26_AF_USBH2_DATA5,
 };
 
 static struct imxuart_platform_data uart_pdata = {
@@ -157,6 +196,37 @@ static struct spi_imx_master pca100_spi_0_data = {
 };
 #endif
 
+static void pca100_ac97_warm_reset(struct snd_ac97 *ac97)
+{
+	mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT);
+	gpio_set_value(GPIO_PORTC + 20, 1);
+	udelay(2);
+	gpio_set_value(GPIO_PORTC + 20, 0);
+	mxc_gpio_mode(PC20_PF_SSI1_FS);
+	msleep(2);
+}
+
+static void pca100_ac97_cold_reset(struct snd_ac97 *ac97)
+{
+	mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT);  /* FS */
+	gpio_set_value(GPIO_PORTC + 20, 0);
+	mxc_gpio_mode(GPIO_PORTC | 22 | GPIO_GPIO | GPIO_OUT);  /* TX */
+	gpio_set_value(GPIO_PORTC + 22, 0);
+	mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_OUT);  /* reset */
+	gpio_set_value(GPIO_PORTC + 28, 0);
+	udelay(10);
+	gpio_set_value(GPIO_PORTC + 28, 1);
+	mxc_gpio_mode(PC20_PF_SSI1_FS);
+	mxc_gpio_mode(PC22_PF_SSI1_TXD);
+	msleep(2);
+}
+
+static struct imx_ssi_platform_data pca100_ssi_pdata = {
+	.ac97_reset		= pca100_ac97_cold_reset,
+	.ac97_warm_reset	= pca100_ac97_warm_reset,
+	.flags			= IMX_SSI_USE_AC97,
+};
+
 static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
 		void *data)
 {
@@ -182,21 +252,79 @@ static struct imxmmc_platform_data sdhc_pdata = {
 	.exit = pca100_sdhc2_exit,
 };
 
+static int otg_phy_init(struct platform_device *pdev)
+{
+	gpio_set_value(OTG_PHY_CS_GPIO, 0);
+	return 0;
+}
+
+static struct mxc_usbh_platform_data otg_pdata = {
+	.init	= otg_phy_init,
+	.portsc	= MXC_EHCI_MODE_ULPI,
+	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static int usbh2_phy_init(struct platform_device *pdev)
+{
+	gpio_set_value(USBH2_PHY_CS_GPIO, 0);
+	return 0;
+}
+
+static struct mxc_usbh_platform_data usbh2_pdata = {
+	.init	= usbh2_phy_init,
+	.portsc	= MXC_EHCI_MODE_ULPI,
+	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static struct fsl_usb2_platform_data otg_device_pdata = {
+	.operating_mode = FSL_USB2_DR_DEVICE,
+	.phy_mode       = FSL_USB2_PHY_ULPI,
+};
+
+static int otg_mode_host;
+
+static int __init pca100_otg_mode(char *options)
+{
+	if (!strcmp(options, "host"))
+		otg_mode_host = 1;
+	else if (!strcmp(options, "device"))
+		otg_mode_host = 0;
+	else
+		pr_info("otg_mode neither \"host\" nor \"device\". "
+			"Defaulting to device\n");
+	return 0;
+}
+__setup("otg_mode=", pca100_otg_mode);
+
 static void __init pca100_init(void)
 {
 	int ret;
 
+	/* SSI unit */
+	mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0,
+				  MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */
+				  MXC_AUDMUX_V1_PCR_TFCSEL(3) |
+				  MXC_AUDMUX_V1_PCR_TCLKDIR | /* clock is output */
+				  MXC_AUDMUX_V1_PCR_RXDSEL(3));
+	mxc_audmux_v1_configure_port(3,
+				  MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */
+				  MXC_AUDMUX_V1_PCR_TFCSEL(0) |
+				  MXC_AUDMUX_V1_PCR_TFSDIR |
+				  MXC_AUDMUX_V1_PCR_RXDSEL(0));
+
 	ret = mxc_gpio_setup_multiple_pins(pca100_pins,
 			ARRAY_SIZE(pca100_pins), "PCA100");
 	if (ret)
 		printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret);
 
+	mxc_register_device(&imx_ssi_device0, &pca100_ssi_pdata);
+
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
 
 	mxc_gpio_mode(GPIO_PORTC | 29 | GPIO_GPIO | GPIO_IN);
 	mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
 
-	mxc_register_device(&mxc_nand_device, &pca100_nand_board_info);
+	mxc_register_device(&imx27_nand_device, &pca100_nand_board_info);
 
 	/* only the i2c master 1 is used on this CPU card */
 	i2c_register_board_info(1, pca100_i2c_devices,
@@ -220,6 +348,29 @@ static void __init pca100_init(void)
 	mxc_register_device(&mxc_spi_device0, &pca100_spi_0_data);
 #endif
 
+	gpio_request(OTG_PHY_CS_GPIO, "usb-otg-cs");
+	gpio_direction_output(OTG_PHY_CS_GPIO, 1);
+	gpio_request(USBH2_PHY_CS_GPIO, "usb-host2-cs");
+	gpio_direction_output(USBH2_PHY_CS_GPIO, 1);
+
+#if defined(CONFIG_USB_ULPI)
+	if (otg_mode_host) {
+		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+		mxc_register_device(&mxc_otg_host, &otg_pdata);
+	}
+
+	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+#endif
+	if (!otg_mode_host) {
+		gpio_set_value(OTG_PHY_CS_GPIO, 0);
+		mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
+	}
+
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 }
 
@@ -233,9 +384,9 @@ static struct sys_timer pca100_timer = {
 };
 
 MACHINE_START(PCA100, "phyCARD-i.MX27")
-	.phys_io        = AIPI_BASE_ADDR,
-	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
+	.phys_io        = MX27_AIPI_BASE_ADDR,
+	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = MX27_PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
 	.init_irq       = mx27_init_irq,
 	.init_machine   = pca100_init,
diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/mach-pcm038.c
index 906d59b0a7aa..035fbe046ec0 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/mach-pcm038.c
@@ -36,10 +36,12 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/i2c.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx27.h>
 #include <mach/imx-uart.h>
 #include <mach/mxc_nand.h>
 #include <mach/spi.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
 
 #include "devices.h"
 
@@ -96,6 +98,19 @@ static int pcm038_pins[] = {
 	PC17_PF_SSI4_RXD,
 	PC18_PF_SSI4_TXD,
 	PC19_PF_SSI4_CLK,
+	/* USB host */
+	PA0_PF_USBH2_CLK,
+	PA1_PF_USBH2_DIR,
+	PA2_PF_USBH2_DATA7,
+	PA3_PF_USBH2_NXT,
+	PA4_PF_USBH2_STP,
+	PD19_AF_USBH2_DATA4,
+	PD20_AF_USBH2_DATA3,
+	PD21_AF_USBH2_DATA6,
+	PD22_AF_USBH2_DATA0,
+	PD23_AF_USBH2_DATA2,
+	PD24_AF_USBH2_DATA1,
+	PD26_AF_USBH2_DATA5,
 };
 
 /*
@@ -108,8 +123,8 @@ static struct platdata_mtd_ram pcm038_sram_data = {
 };
 
 static struct resource pcm038_sram_resource = {
-	.start = CS1_BASE_ADDR,
-	.end   = CS1_BASE_ADDR + 512 * 1024 - 1,
+	.start = MX27_CS1_BASE_ADDR,
+	.end   = MX27_CS1_BASE_ADDR + 512 * 1024 - 1,
 	.flags = IORESOURCE_MEM,
 };
 
@@ -173,9 +188,7 @@ static struct platform_device *platform_devices[] __initdata = {
  * setup other stuffs to access the sram. */
 static void __init pcm038_init_sram(void)
 {
-	__raw_writel(0x0000d843, CSCR_U(1));
-	__raw_writel(0x22252521, CSCR_L(1));
-	__raw_writel(0x22220a00, CSCR_A(1));
+	mx27_setup_weimcs(1, 0x0000d843, 0x22252521, 0x22220a00);
 }
 
 static struct imxi2c_platform_data pcm038_i2c_1_data = {
@@ -279,6 +292,11 @@ static struct spi_board_info pcm038_spi_board_info[] __initdata = {
 	}
 };
 
+static struct mxc_usbh_platform_data usbh2_pdata = {
+	.portsc	= MXC_EHCI_MODE_ULPI,
+	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
 static void __init pcm038_init(void)
 {
 	mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins),
@@ -291,7 +309,7 @@ static void __init pcm038_init(void)
 	mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
 
 	mxc_gpio_mode(PE16_AF_OWIRE);
-	mxc_register_device(&mxc_nand_device, &pcm038_nand_board_info);
+	mxc_register_device(&imx27_nand_device, &pcm038_nand_board_info);
 
 	/* only the i2c master 1 is used on this CPU card */
 	i2c_register_board_info(1, pcm038_i2c_devices,
@@ -311,6 +329,8 @@ static void __init pcm038_init(void)
 	spi_register_board_info(pcm038_spi_board_info,
 				ARRAY_SIZE(pcm038_spi_board_info));
 
+	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
 #ifdef CONFIG_MACH_PCM970_BASEBOARD
@@ -328,9 +348,9 @@ static struct sys_timer pcm038_timer = {
 };
 
 MACHINE_START(PCM038, "phyCORE-i.MX27")
-	.phys_io        = AIPI_BASE_ADDR,
-	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
+	.phys_io        = MX27_AIPI_BASE_ADDR,
+	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = MX27_PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
 	.init_irq       = mx27_init_irq,
 	.init_machine   = pcm038_init,
diff --git a/arch/arm/mach-mx2/mm-imx21.c b/arch/arm/mach-mx2/mm-imx21.c
new file mode 100644
index 000000000000..64134314d012
--- /dev/null
+++ b/arch/arm/mach-mx2/mm-imx21.c
@@ -0,0 +1,83 @@
+/*
+ * arch/arm/mach-mx2/mm-imx21.c
+ *
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <asm/pgtable.h>
+#include <asm/mach/map.h>
+
+/* MX21 memory map definition */
+static struct map_desc imx21_io_desc[] __initdata = {
+	/*
+	 * this fixed mapping covers:
+	 * - AIPI1
+	 * - AIPI2
+	 * - AITC
+	 * - ROM Patch
+	 * - and some reserved space
+	 */
+	{
+		.virtual = MX21_AIPI_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX21_AIPI_BASE_ADDR),
+		.length = MX21_AIPI_SIZE,
+		.type = MT_DEVICE
+	},
+	/*
+	 * this fixed mapping covers:
+	 * - CSI
+	 * - ATA
+	 */
+	{
+		.virtual = MX21_SAHB1_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX21_SAHB1_BASE_ADDR),
+		.length = MX21_SAHB1_SIZE,
+		.type = MT_DEVICE
+	},
+	/*
+	 * this fixed mapping covers:
+	 * - EMI
+	 */
+	{
+		.virtual = MX21_X_MEMC_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX21_X_MEMC_BASE_ADDR),
+		.length = MX21_X_MEMC_SIZE,
+		.type = MT_DEVICE
+	},
+};
+
+/*
+ * Initialize the memory map. It is called during the
+ * system startup to create static physical to virtual
+ * memory map for the IO modules.
+ */
+void __init mx21_map_io(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX21);
+	mxc_arch_reset_init(MX21_IO_ADDRESS(MX21_WDOG_BASE_ADDR));
+
+	iotable_init(imx21_io_desc, ARRAY_SIZE(imx21_io_desc));
+}
+
+void __init mx21_init_irq(void)
+{
+	mxc_init_irq(MX21_IO_ADDRESS(MX21_AVIC_BASE_ADDR));
+}
diff --git a/arch/arm/mach-mx2/generic.c b/arch/arm/mach-mx2/mm-imx27.c
index ae8f759134d1..3366ed44cfd5 100644
--- a/arch/arm/mach-mx2/generic.c
+++ b/arch/arm/mach-mx2/mm-imx27.c
@@ -1,5 +1,5 @@
 /*
- * generic.c
+ * arch/arm/mach-mx2/mm-imx27.c
  *
  * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
  *
@@ -26,7 +26,7 @@
 #include <asm/mach/map.h>
 
 /* MX27 memory map definition */
-static struct map_desc mxc_io_desc[] __initdata = {
+static struct map_desc imx27_io_desc[] __initdata = {
 	/*
 	 * this fixed mapping covers:
 	 * - AIPI1
@@ -36,9 +36,9 @@ static struct map_desc mxc_io_desc[] __initdata = {
 	 * - and some reserved space
 	 */
 	{
-		.virtual = AIPI_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(AIPI_BASE_ADDR),
-		.length = AIPI_SIZE,
+		.virtual = MX27_AIPI_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX27_AIPI_BASE_ADDR),
+		.length = MX27_AIPI_SIZE,
 		.type = MT_DEVICE
 	},
 	/*
@@ -47,9 +47,9 @@ static struct map_desc mxc_io_desc[] __initdata = {
 	 * - ATA
 	 */
 	{
-		.virtual = SAHB1_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(SAHB1_BASE_ADDR),
-		.length = SAHB1_SIZE,
+		.virtual = MX27_SAHB1_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX27_SAHB1_BASE_ADDR),
+		.length = MX27_SAHB1_SIZE,
 		.type = MT_DEVICE
 	},
 	/*
@@ -57,11 +57,11 @@ static struct map_desc mxc_io_desc[] __initdata = {
 	 * - EMI
 	 */
 	{
-		.virtual = X_MEMC_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(X_MEMC_BASE_ADDR),
-		.length = X_MEMC_SIZE,
+		.virtual = MX27_X_MEMC_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX27_X_MEMC_BASE_ADDR),
+		.length = MX27_X_MEMC_SIZE,
 		.type = MT_DEVICE
-	}
+	},
 };
 
 /*
@@ -69,29 +69,15 @@ static struct map_desc mxc_io_desc[] __initdata = {
  * system startup to create static physical to virtual
  * memory map for the IO modules.
  */
-void __init mx21_map_io(void)
-{
-	mxc_set_cpu_type(MXC_CPU_MX21);
-	mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
-
-	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
-}
-
 void __init mx27_map_io(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX27);
-	mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
+	mxc_arch_reset_init(MX27_IO_ADDRESS(MX27_WDOG_BASE_ADDR));
 
-	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+	iotable_init(imx27_io_desc, ARRAY_SIZE(imx27_io_desc));
 }
 
 void __init mx27_init_irq(void)
 {
-	mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
+	mxc_init_irq(MX27_IO_ADDRESS(MX27_AVIC_BASE_ADDR));
 }
-
-void __init mx21_init_irq(void)
-{
-	mx27_init_irq();
-}
-
diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c
index 3cb7f457e5d0..4aafd5b8b85b 100644
--- a/arch/arm/mach-mx2/pcm970-baseboard.c
+++ b/arch/arm/mach-mx2/pcm970-baseboard.c
@@ -24,7 +24,7 @@
 #include <asm/mach/arch.h>
 
 #include <mach/common.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx27.h>
 #include <mach/imxfb.h>
 #include <mach/hardware.h>
 #include <mach/mmc.h>
@@ -190,8 +190,8 @@ static struct imx_fb_platform_data pcm038_fb_data = {
 
 static struct resource pcm970_sja1000_resources[] = {
 	{
-		.start   = CS4_BASE_ADDR,
-		.end     = CS4_BASE_ADDR + 0x100 - 1,
+		.start   = MX27_CS4_BASE_ADDR,
+		.end     = MX27_CS4_BASE_ADDR + 0x100 - 1,
 		.flags   = IORESOURCE_MEM,
 	}, {
 		.start   = IRQ_GPIOE(19),
diff --git a/arch/arm/mach-mx2/serial.c b/arch/arm/mach-mx2/serial.c
index 40a485cdc10e..1c0c835b2252 100644
--- a/arch/arm/mach-mx2/serial.c
+++ b/arch/arm/mach-mx2/serial.c
@@ -26,12 +26,12 @@
 
 static struct resource uart0[] = {
 	{
-		.start = UART1_BASE_ADDR,
-		.end = UART1_BASE_ADDR + 0x0B5,
+		.start = MX2x_UART1_BASE_ADDR,
+		.end = MX2x_UART1_BASE_ADDR + 0x0B5,
 		.flags = IORESOURCE_MEM,
 	}, {
-		.start = MXC_INT_UART1,
-		.end = MXC_INT_UART1,
+		.start = MX2x_INT_UART1,
+		.end = MX2x_INT_UART1,
 		.flags = IORESOURCE_IRQ,
 	},
 };
@@ -45,12 +45,12 @@ struct platform_device mxc_uart_device0 = {
 
 static struct resource uart1[] = {
 	{
-		.start = UART2_BASE_ADDR,
-		.end = UART2_BASE_ADDR + 0x0B5,
+		.start = MX2x_UART2_BASE_ADDR,
+		.end = MX2x_UART2_BASE_ADDR + 0x0B5,
 		.flags = IORESOURCE_MEM,
 	}, {
-		.start = MXC_INT_UART2,
-		.end = MXC_INT_UART2,
+		.start = MX2x_INT_UART2,
+		.end = MX2x_INT_UART2,
 		.flags = IORESOURCE_IRQ,
 	},
 };
@@ -64,12 +64,12 @@ struct platform_device mxc_uart_device1 = {
 
 static struct resource uart2[] = {
 	{
-		.start = UART3_BASE_ADDR,
-		.end = UART3_BASE_ADDR + 0x0B5,
+		.start = MX2x_UART3_BASE_ADDR,
+		.end = MX2x_UART3_BASE_ADDR + 0x0B5,
 		.flags = IORESOURCE_MEM,
 	}, {
-		.start = MXC_INT_UART3,
-		.end = MXC_INT_UART3,
+		.start = MX2x_INT_UART3,
+		.end = MX2x_INT_UART3,
 		.flags = IORESOURCE_IRQ,
 	},
 };
@@ -83,12 +83,12 @@ struct platform_device mxc_uart_device2 = {
 
 static struct resource uart3[] = {
 	{
-		.start = UART4_BASE_ADDR,
-		.end = UART4_BASE_ADDR + 0x0B5,
+		.start = MX2x_UART4_BASE_ADDR,
+		.end = MX2x_UART4_BASE_ADDR + 0x0B5,
 		.flags = IORESOURCE_MEM,
 	}, {
-		.start = MXC_INT_UART4,
-		.end = MXC_INT_UART4,
+		.start = MX2x_INT_UART4,
+		.end = MX2x_INT_UART4,
 		.flags = IORESOURCE_IRQ,
 	},
 };
@@ -103,12 +103,12 @@ struct platform_device mxc_uart_device3 = {
 #ifdef CONFIG_MACH_MX27
 static struct resource uart4[] = {
 	{
-		.start = UART5_BASE_ADDR,
-		.end = UART5_BASE_ADDR + 0x0B5,
+		.start = MX27_UART5_BASE_ADDR,
+		.end = MX27_UART5_BASE_ADDR + 0x0B5,
 		.flags = IORESOURCE_MEM,
 	}, {
-		.start = MXC_INT_UART5,
-		.end = MXC_INT_UART5,
+		.start = MX27_INT_UART5,
+		.end = MX27_INT_UART5,
 		.flags = IORESOURCE_IRQ,
 	},
 };
@@ -122,12 +122,12 @@ struct platform_device mxc_uart_device4 = {
 
 static struct resource uart5[] = {
 	{
-		.start = UART6_BASE_ADDR,
-		.end = UART6_BASE_ADDR + 0x0B5,
+		.start = MX27_UART6_BASE_ADDR,
+		.end = MX27_UART6_BASE_ADDR + 0x0B5,
 		.flags = IORESOURCE_MEM,
 	}, {
-		.start = MXC_INT_UART6,
-		.end = MXC_INT_UART6,
+		.start = MX27_INT_UART6,
+		.end = MX27_INT_UART6,
 		.flags = IORESOURCE_IRQ,
 	},
 };
diff --git a/arch/arm/mach-mx25/Kconfig b/arch/arm/mach-mx25/Kconfig
index cc28f56eae80..54d217314ee9 100644
--- a/arch/arm/mach-mx25/Kconfig
+++ b/arch/arm/mach-mx25/Kconfig
@@ -3,7 +3,6 @@ if ARCH_MX25
 comment "MX25 platforms:"
 
 config MACH_MX25_3DS
-	select ARCH_MXC_IOMUX_V3
 	bool "Support MX25PDK (3DS) Platform"
 
 endif
diff --git a/arch/arm/mach-mx25/Makefile b/arch/arm/mach-mx25/Makefile
index fe23836a9f3d..10cebc5ced8c 100644
--- a/arch/arm/mach-mx25/Makefile
+++ b/arch/arm/mach-mx25/Makefile
@@ -1,3 +1,3 @@
 obj-y				:= mm.o devices.o
 obj-$(CONFIG_ARCH_MX25)		+= clock.o
-obj-$(CONFIG_MACH_MX25_3DS)	+= mx25pdk.o
+obj-$(CONFIG_MACH_MX25_3DS)	+= mach-mx25pdk.o
diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-mx25/clock.c
index 37e1359ad0c0..155014993b13 100644
--- a/arch/arm/mach-mx25/clock.c
+++ b/arch/arm/mach-mx25/clock.c
@@ -124,6 +124,11 @@ static unsigned long get_rate_gpt(struct clk *clk)
 	return get_rate_per(5);
 }
 
+static unsigned long get_rate_lcdc(struct clk *clk)
+{
+	return get_rate_per(7);
+}
+
 static unsigned long get_rate_otg(struct clk *clk)
 {
 	return 48000000; /* FIXME */
@@ -167,6 +172,8 @@ DEFINE_CLOCK(cspi1_clk,  0, CCM_CGCR1,  5, get_rate_ipg, NULL, NULL);
 DEFINE_CLOCK(cspi2_clk,  0, CCM_CGCR1,  6, get_rate_ipg, NULL, NULL);
 DEFINE_CLOCK(cspi3_clk,  0, CCM_CGCR1,  7, get_rate_ipg, NULL, NULL);
 DEFINE_CLOCK(fec_ahb_clk, 0, CCM_CGCR0, 23, NULL,	 NULL, NULL);
+DEFINE_CLOCK(lcdc_ahb_clk, 0, CCM_CGCR0, 24, NULL,	 NULL, NULL);
+DEFINE_CLOCK(lcdc_per_clk, 0, CCM_CGCR0,  7, NULL,	 NULL, &lcdc_ahb_clk);
 DEFINE_CLOCK(uart1_clk,  0, CCM_CGCR2, 14, get_rate_uart, NULL, &uart_per_clk);
 DEFINE_CLOCK(uart2_clk,  0, CCM_CGCR2, 15, get_rate_uart, NULL, &uart_per_clk);
 DEFINE_CLOCK(uart3_clk,  0, CCM_CGCR2, 16, get_rate_uart, NULL, &uart_per_clk);
@@ -182,6 +189,8 @@ DEFINE_CLOCK(kpp_clk,	 0, CCM_CGCR1, 28, get_rate_ipg, NULL, NULL);
 DEFINE_CLOCK(tsc_clk,	 0, CCM_CGCR2, 13, get_rate_ipg, NULL, NULL);
 DEFINE_CLOCK(i2c_clk,	 0, CCM_CGCR0,  6, get_rate_i2c, NULL, NULL);
 DEFINE_CLOCK(fec_clk,	 0, CCM_CGCR1, 15, get_rate_ipg, NULL, &fec_ahb_clk);
+DEFINE_CLOCK(dryice_clk, 0, CCM_CGCR1,  8, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(lcdc_clk,	 0, CCM_CGCR1, 29, get_rate_lcdc, NULL, &lcdc_per_clk);
 
 #define _REGISTER_CLOCK(d, n, c)	\
 	{				\
@@ -214,6 +223,8 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c_clk)
 	_REGISTER_CLOCK("imx-i2c.2", NULL, i2c_clk)
 	_REGISTER_CLOCK("fec.0", NULL, fec_clk)
+	_REGISTER_CLOCK("imxdi_rtc.0", NULL, dryice_clk)
+	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
 };
 
 int __init mx25_clocks_init(void)
@@ -228,6 +239,9 @@ int __init mx25_clocks_init(void)
 	__raw_writel((0xf << 16) | (3 << 26), CRM_BASE + CCM_CGCR1);
 	__raw_writel((1 << 5), CRM_BASE + CCM_CGCR2);
 
+	/* Clock source for lcdc is upll */
+	__raw_writel(__raw_readl(CRM_BASE+0x64) | (1 << 7), CRM_BASE + 0x64);
+
 	mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
 
 	return 0;
diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c
index 9fdeea1c083b..3f4b8a0b5fac 100644
--- a/arch/arm/mach-mx25/devices.c
+++ b/arch/arm/mach-mx25/devices.c
@@ -438,3 +438,65 @@ struct platform_device mx25_fec_device = {
 	.num_resources	= ARRAY_SIZE(mx25_fec_resources),
 	.resource	= mx25_fec_resources,
 };
+
+static struct resource mxc_nand_resources[] = {
+	{
+		.start	= MX25_NFC_BASE_ADDR,
+		.end	= MX25_NFC_BASE_ADDR + 0x1fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= MX25_INT_NANDFC,
+		.end	= MX25_INT_NANDFC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_nand_device = {
+	.name		= "mxc_nand",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(mxc_nand_resources),
+	.resource	= mxc_nand_resources,
+};
+
+static struct resource mx25_rtc_resources[] = {
+	{
+		.start	= MX25_DRYICE_BASE_ADDR,
+		.end	= MX25_DRYICE_BASE_ADDR + 0x40,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= MX25_INT_DRYICE,
+		.flags	= IORESOURCE_IRQ
+	},
+};
+
+struct platform_device mx25_rtc_device = {
+	.name	= "imxdi_rtc",
+	.id	= 0,
+	.num_resources	= ARRAY_SIZE(mx25_rtc_resources),
+	.resource	= mx25_rtc_resources,
+};
+
+static struct resource mx25_fb_resources[] = {
+	{
+		.start	= MX25_LCDC_BASE_ADDR,
+		.end	= MX25_LCDC_BASE_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= MX25_INT_LCDC,
+		.end	= MX25_INT_LCDC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mx25_fb_device = {
+	.name		= "imx-fb",
+	.id		= 0,
+	.resource	= mx25_fb_resources,
+	.num_resources	= ARRAY_SIZE(mx25_fb_resources),
+	.dev		= {
+		.coherent_dma_mask = 0xFFFFFFFF,
+	},
+};
diff --git a/arch/arm/mach-mx25/devices.h b/arch/arm/mach-mx25/devices.h
index fe5420fcd11f..39560e13bc0d 100644
--- a/arch/arm/mach-mx25/devices.h
+++ b/arch/arm/mach-mx25/devices.h
@@ -18,3 +18,6 @@ extern struct platform_device mxc_i2c_device0;
 extern struct platform_device mxc_i2c_device1;
 extern struct platform_device mxc_i2c_device2;
 extern struct platform_device mx25_fec_device;
+extern struct platform_device mxc_nand_device;
+extern struct platform_device mx25_rtc_device;
+extern struct platform_device mx25_fb_device;
diff --git a/arch/arm/mach-mx25/mx25pdk.c b/arch/arm/mach-mx25/mach-mx25pdk.c
index 6f06089246eb..83d74109e7d8 100644
--- a/arch/arm/mach-mx25/mx25pdk.c
+++ b/arch/arm/mach-mx25/mach-mx25pdk.c
@@ -35,8 +35,9 @@
 #include <mach/imx-uart.h>
 #include <mach/mx25.h>
 #include <mach/mxc_nand.h>
+#include <mach/imxfb.h>
 #include "devices.h"
-#include <mach/iomux.h>
+#include <mach/iomux-mx25.h>
 
 static struct imxuart_platform_data uart_pdata = {
 	.flags = IMXUART_HAVE_RTSCTS,
@@ -54,6 +55,31 @@ static struct pad_desc mx25pdk_pads[] = {
 	MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
 	MX25_PAD_A17__GPIO_2_3, /* FEC_EN, GPIO 35 */
 	MX25_PAD_D12__GPIO_4_8, /* FEC_RESET_B, GPIO 104 */
+
+	/* LCD */
+	MX25_PAD_LD0__LD0,
+	MX25_PAD_LD1__LD1,
+	MX25_PAD_LD2__LD2,
+	MX25_PAD_LD3__LD3,
+	MX25_PAD_LD4__LD4,
+	MX25_PAD_LD5__LD5,
+	MX25_PAD_LD6__LD6,
+	MX25_PAD_LD7__LD7,
+	MX25_PAD_LD8__LD8,
+	MX25_PAD_LD9__LD9,
+	MX25_PAD_LD10__LD10,
+	MX25_PAD_LD11__LD11,
+	MX25_PAD_LD12__LD12,
+	MX25_PAD_LD13__LD13,
+	MX25_PAD_LD14__LD14,
+	MX25_PAD_LD15__LD15,
+	MX25_PAD_GPIO_E__LD16,
+	MX25_PAD_GPIO_F__LD17,
+	MX25_PAD_HSYNC__HSYNC,
+	MX25_PAD_VSYNC__VSYNC,
+	MX25_PAD_LSCLK__LSCLK,
+	MX25_PAD_OE_ACD__OE_ACD,
+	MX25_PAD_CONTRAST__CONTRAST,
 };
 
 static struct fec_platform_data mx25_fec_pdata = {
@@ -77,6 +103,40 @@ static void __init mx25pdk_fec_reset(void)
 	gpio_set_value(FEC_RESET_B_GPIO, 1);
 }
 
+static struct mxc_nand_platform_data mx25pdk_nand_board_info = {
+	.width		= 1,
+	.hw_ecc		= 1,
+	.flash_bbt	= 1,
+};
+
+static struct imx_fb_videomode mx25pdk_modes[] = {
+	{
+		.mode	= {
+			.name		= "CRT-VGA",
+			.refresh	= 60,
+			.xres		= 640,
+			.yres		= 480,
+			.pixclock	= 39683,
+			.left_margin	= 45,
+			.right_margin	= 114,
+			.upper_margin	= 33,
+			.lower_margin	= 11,
+			.hsync_len	= 1,
+			.vsync_len	= 1,
+		},
+		.bpp	= 16,
+		.pcr	= 0xFA208B80,
+	},
+};
+
+static struct imx_fb_platform_data mx25pdk_fb_pdata = {
+	.mode		= mx25pdk_modes,
+	.num_modes	= ARRAY_SIZE(mx25pdk_modes),
+	.pwmr		= 0x00A903FF,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00020010,
+};
+
 static void __init mx25pdk_init(void)
 {
 	mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
@@ -84,6 +144,9 @@ static void __init mx25pdk_init(void)
 
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
 	mxc_register_device(&mxc_usbh2, NULL);
+	mxc_register_device(&mxc_nand_device, &mx25pdk_nand_board_info);
+	mxc_register_device(&mx25_rtc_device, NULL);
+	mxc_register_device(&mx25_fb_device, &mx25pdk_fb_pdata);
 
 	mx25pdk_fec_reset();
 	mxc_register_device(&mx25_fec_device, &mx25_fec_pdata);
@@ -102,7 +165,7 @@ MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)")
 	/* Maintainer: Freescale Semiconductor, Inc. */
 	.phys_io	= MX25_AIPS1_BASE_ADDR,
 	.io_pg_offst	= ((MX25_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
+	.boot_params    = MX25_PHYS_OFFSET + 0x100,
 	.map_io         = mx25_map_io,
 	.init_irq       = mx25_init_irq,
 	.init_machine   = mx25pdk_init,
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index 28294416b0af..3872af1cf2c3 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -34,6 +34,7 @@ config MACH_MX31ADS_WM1133_EV1
 config MACH_PCM037
 	bool "Support Phytec pcm037 (i.MX31) platforms"
 	select ARCH_MX31
+	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for Phytec pcm037 platform. This includes
 	  specific configurations for the board and its peripherals.
@@ -86,6 +87,7 @@ config MACH_QONG
 config MACH_PCM043
 	bool "Support Phytec pcm043 (i.MX35) platforms"
 	select ARCH_MX35
+	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for Phytec pcm043 platform. This includes
 	  specific configurations for the board and its peripherals.
diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
index 93c7b296be6a..5d650fda5d5d 100644
--- a/arch/arm/mach-mx3/Makefile
+++ b/arch/arm/mach-mx3/Makefile
@@ -5,18 +5,22 @@
 # Object file lists.
 
 obj-y				:= mm.o devices.o cpu.o
-obj-$(CONFIG_ARCH_MX31)		+= clock.o iomux.o
+CFLAGS_mm.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
+CFLAGS_devices.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
+CFLAGS_cpu.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
+obj-$(CONFIG_ARCH_MX31)		+= clock-imx31.o iomux-imx31.o
 obj-$(CONFIG_ARCH_MX35)		+= clock-imx35.o
-obj-$(CONFIG_MACH_MX31ADS)	+= mx31ads.o
-obj-$(CONFIG_MACH_MX31LILLY)	+= mx31lilly.o mx31lilly-db.o
-obj-$(CONFIG_MACH_MX31LITE)	+= mx31lite.o mx31lite-db.o
-obj-$(CONFIG_MACH_PCM037)	+= pcm037.o
-obj-$(CONFIG_MACH_PCM037_EET)	+= pcm037_eet.o
-obj-$(CONFIG_MACH_MX31_3DS)	+= mx31pdk.o
-obj-$(CONFIG_MACH_MX31MOBOARD)	+= mx31moboard.o mx31moboard-devboard.o \
-				   mx31moboard-marxbot.o
-obj-$(CONFIG_MACH_QONG)		+= qong.o
-obj-$(CONFIG_MACH_PCM043)	+= pcm043.o
-obj-$(CONFIG_MACH_ARMADILLO5X0) += armadillo5x0.o
-obj-$(CONFIG_MACH_MX35_3DS)	+= mx35pdk.o
-obj-$(CONFIG_MACH_KZM_ARM11_01)	+= kzmarm11.o
+obj-$(CONFIG_MACH_MX31ADS)	+= mach-mx31ads.o
+obj-$(CONFIG_MACH_MX31LILLY)	+= mach-mx31lilly.o mx31lilly-db.o
+obj-$(CONFIG_MACH_MX31LITE)	+= mach-mx31lite.o mx31lite-db.o
+obj-$(CONFIG_MACH_PCM037)	+= mach-pcm037.o
+obj-$(CONFIG_MACH_PCM037_EET)	+= mach-pcm037_eet.o
+obj-$(CONFIG_MACH_MX31_3DS)	+= mach-mx31_3ds.o
+CFLAGS_mach-mx31_3ds.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
+obj-$(CONFIG_MACH_MX31MOBOARD)	+= mach-mx31moboard.o mx31moboard-devboard.o \
+				   mx31moboard-marxbot.o mx31moboard-smartbot.o
+obj-$(CONFIG_MACH_QONG)		+= mach-qong.o
+obj-$(CONFIG_MACH_PCM043)	+= mach-pcm043.o
+obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o
+obj-$(CONFIG_MACH_MX35_3DS)	+= mach-mx35pdk.o
+obj-$(CONFIG_MACH_KZM_ARM11_01)	+= mach-kzm_arm11_01.o
diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock-imx31.c
index b5c39a016db7..80dba9966b5e 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock-imx31.c
@@ -616,14 +616,15 @@ int __init mx31_clocks_init(unsigned long fref)
 
 	mx31_read_cpu_rev();
 
-	if (mx31_revision() >= CHIP_REV_2_0) {
+	if (mx31_revision() >= MX31_CHIP_REV_2_0) {
 		reg = __raw_readl(MXC_CCM_PMCR1);
 		/* No PLL restart on DVFS switch; enable auto EMI handshake */
 		reg |= MXC_CCM_PMCR1_PLLRDIS | MXC_CCM_PMCR1_EMIRQ_EN;
 		__raw_writel(reg, MXC_CCM_PMCR1);
 	}
 
-	mxc_timer_init(&ipg_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT);
+	mxc_timer_init(&ipg_clk, MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR),
+			MX31_INT_GPT);
 
 	return 0;
 }
diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index f3f41fa4f21b..9f3e943e2232 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -28,7 +28,7 @@
 #include <mach/hardware.h>
 #include <mach/common.h>
 
-#define CCM_BASE	IO_ADDRESS(CCM_BASE_ADDR)
+#define CCM_BASE	MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR)
 
 #define CCM_CCMR        0x00
 #define CCM_PDR0        0x04
@@ -502,7 +502,8 @@ int __init mx35_clocks_init()
 	__raw_writel((3 << 26) | ll, CCM_BASE + CCM_CGR2);
 	__raw_writel(0, CCM_BASE + CCM_CGR3);
 
-	mxc_timer_init(&gpt_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT);
+	mxc_timer_init(&gpt_clk,
+			MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT);
 
 	return 0;
 }
diff --git a/arch/arm/mach-mx3/cpu.c b/arch/arm/mach-mx3/cpu.c
index db828809c675..861afe0fe3ad 100644
--- a/arch/arm/mach-mx3/cpu.c
+++ b/arch/arm/mach-mx3/cpu.c
@@ -41,7 +41,7 @@ void __init mx31_read_cpu_rev(void)
 	u32 i, srev;
 
 	/* read SREV register from IIM module */
-	srev = __raw_readl(IO_ADDRESS(IIM_BASE_ADDR) + MXC_IIMSREV);
+	srev = __raw_readl(IO_ADDRESS(IIM_BASE_ADDR + MXC_IIMSREV));
 
 	for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++)
 		if (srev == mx31_cpu_type[i].srev) {
diff --git a/arch/arm/mach-mx3/crm_regs.h b/arch/arm/mach-mx3/crm_regs.h
index adfa3627ad84..37a8a07beda3 100644
--- a/arch/arm/mach-mx3/crm_regs.h
+++ b/arch/arm/mach-mx3/crm_regs.h
@@ -24,7 +24,7 @@
 #define CKIH_CLK_FREQ_27MHZ     27000000
 #define CKIL_CLK_FREQ           32768
 
-#define MXC_CCM_BASE		IO_ADDRESS(CCM_BASE_ADDR)
+#define MXC_CCM_BASE		MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR)
 
 /* Register addresses */
 #define MXC_CCM_CCMR		(MXC_CCM_BASE + 0x00)
diff --git a/arch/arm/mach-mx3/iomux.c b/arch/arm/mach-mx3/iomux-imx31.c
index c66ccbcdc11b..a1d7fa5123dc 100644
--- a/arch/arm/mach-mx3/iomux.c
+++ b/arch/arm/mach-mx3/iomux-imx31.c
@@ -29,7 +29,7 @@
 /*
  * IOMUX register (base) addresses
  */
-#define IOMUX_BASE	IO_ADDRESS(IOMUXC_BASE_ADDR)
+#define IOMUX_BASE	MX31_IO_ADDRESS(MX31_IOMUXC_BASE_ADDR)
 #define IOMUXINT_OBS1	(IOMUX_BASE + 0x000)
 #define IOMUXINT_OBS2	(IOMUX_BASE + 0x004)
 #define IOMUXGPR	(IOMUX_BASE + 0x008)
diff --git a/arch/arm/mach-mx3/armadillo5x0.c b/arch/arm/mach-mx3/mach-armadillo5x0.c
index 54aab401dbdf..3d72b0b89705 100644
--- a/arch/arm/mach-mx3/armadillo5x0.c
+++ b/arch/arm/mach-mx3/mach-armadillo5x0.c
@@ -182,8 +182,8 @@ static struct physmap_flash_data armadillo5x0_nor_flash_pdata = {
 
 static struct resource armadillo5x0_nor_flash_resource = {
 	.flags		= IORESOURCE_MEM,
-	.start		= CS0_BASE_ADDR,
-	.end		= CS0_BASE_ADDR + SZ_64M - 1,
+	.start		= MX31_CS0_BASE_ADDR,
+	.end		= MX31_CS0_BASE_ADDR + SZ_64M - 1,
 };
 
 static struct platform_device armadillo5x0_nor_flash = {
@@ -311,8 +311,8 @@ static struct imxmmc_platform_data sdhc_pdata = {
  */
 static struct resource armadillo5x0_smc911x_resources[] = {
 	{
-		.start	= CS3_BASE_ADDR,
-		.end	= CS3_BASE_ADDR + SZ_32M - 1,
+		.start	= MX31_CS3_BASE_ADDR,
+		.end	= MX31_CS3_BASE_ADDR + SZ_32M - 1,
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.start	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
@@ -406,9 +406,9 @@ static struct sys_timer armadillo5x0_timer = {
 
 MACHINE_START(ARMADILLO5X0, "Armadillo-500")
 	/* Maintainer: Alberto Panizzo  */
-	.phys_io	= AIPS1_BASE_ADDR,
-	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params	= PHYS_OFFSET + 0x00000100,
+	.phys_io	= MX31_AIPS1_BASE_ADDR,
+	.io_pg_offst	= (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+	.boot_params	= MX3x_PHYS_OFFSET + 0x100,
 	.map_io		= mx31_map_io,
 	.init_irq	= mx31_init_irq,
 	.timer		= &armadillo5x0_timer,
diff --git a/arch/arm/mach-mx3/kzmarm11.c b/arch/arm/mach-mx3/mach-kzm_arm11_01.c
index 6fa99ce3008a..f085d5d1a6de 100644
--- a/arch/arm/mach-mx3/kzmarm11.c
+++ b/arch/arm/mach-mx3/mach-kzm_arm11_01.c
@@ -46,13 +46,18 @@
 
 #include "devices.h"
 
+#define KZM_ARM11_IO_ADDRESS(x) (					\
+	IMX_IO_ADDRESS(x, MX31_CS4) ?:					\
+	IMX_IO_ADDRESS(x, MX31_CS5) ?:					\
+	MX31_IO_ADDRESS(x))
+
 #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
 /*
  * KZM-ARM11-01 has an external UART on FPGA
  */
 static struct plat_serial8250_port serial_platform_data[] = {
 	{
-		.membase	= IO_ADDRESS(KZM_ARM11_16550),
+		.membase	= KZM_ARM11_IO_ADDRESS(KZM_ARM11_16550),
 		.mapbase	= KZM_ARM11_16550,
 		.irq		= IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
 		.irqflags	= IRQ_TYPE_EDGE_RISING,
@@ -102,9 +107,9 @@ static int __init kzm_init_ext_uart(void)
 	/*
 	 * Unmask UART interrupt
 	 */
-	tmp = __raw_readb(IO_ADDRESS(KZM_ARM11_CTL1));
+	tmp = __raw_readb(KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1));
 	tmp |= 0x2;
-	__raw_writeb(tmp, IO_ADDRESS(KZM_ARM11_CTL1));
+	__raw_writeb(tmp, KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1));
 
 	return platform_device_register(&serial_device);
 }
@@ -128,8 +133,8 @@ static struct smsc911x_platform_config kzm_smsc9118_config = {
 
 static struct resource kzm_smsc9118_resources[] = {
 	{
-		.start	= CS5_BASE_ADDR,
-		.end	= CS5_BASE_ADDR + SZ_128K - 1,
+		.start	= MX31_CS5_BASE_ADDR,
+		.end	= MX31_CS5_BASE_ADDR + SZ_128K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
@@ -222,15 +227,15 @@ static void __init kzm_board_init(void)
  */
 static struct map_desc kzm_io_desc[] __initdata = {
 	{
-		.virtual	= CS4_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(CS4_BASE_ADDR),
-		.length		= CS4_SIZE,
+		.virtual	= MX31_CS4_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MX31_CS4_BASE_ADDR),
+		.length		= MX31_CS4_SIZE,
 		.type		= MT_DEVICE
 	},
 	{
-		.virtual	= CS5_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(CS5_BASE_ADDR),
-		.length		= CS5_SIZE,
+		.virtual	= MX31_CS5_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MX31_CS5_BASE_ADDR),
+		.length		= MX31_CS5_SIZE,
 		.type		= MT_DEVICE
 	},
 };
@@ -258,9 +263,9 @@ static struct sys_timer kzm_timer = {
  * initialize __mach_desc_KZM_ARM11_01 data structure.
  */
 MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
-	.phys_io        = AIPS1_BASE_ADDR,
-	.io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
+	.phys_io        = MX31_AIPS1_BASE_ADDR,
+	.io_pg_offst    = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
 	.map_io         = kzm_map_io,
 	.init_irq       = mx31_init_irq,
 	.init_machine   = kzm_board_init,
diff --git a/arch/arm/mach-mx3/mx31pdk.c b/arch/arm/mach-mx3/mach-mx31_3ds.c
index 18715f1aa7eb..b88c18ad7698 100644
--- a/arch/arm/mach-mx3/mx31pdk.c
+++ b/arch/arm/mach-mx3/mach-mx31_3ds.c
@@ -211,9 +211,9 @@ static int __init mx31pdk_init_expio(void)
  */
 static struct map_desc mx31pdk_io_desc[] __initdata = {
 	{
-		.virtual = CS5_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(CS5_BASE_ADDR),
-		.length = CS5_SIZE,
+		.virtual = MX31_CS5_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX31_CS5_BASE_ADDR),
+		.length = MX31_CS5_SIZE,
 		.type = MT_DEVICE,
 	},
 };
@@ -256,9 +256,9 @@ static struct sys_timer mx31pdk_timer = {
  */
 MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
 	/* Maintainer: Freescale Semiconductor, Inc. */
-	.phys_io	= AIPS1_BASE_ADDR,
-	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
+	.phys_io	= MX31_AIPS1_BASE_ADDR,
+	.io_pg_offst	= (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
 	.map_io         = mx31pdk_map_io,
 	.init_irq       = mx31_init_irq,
 	.init_machine   = mxc_board_init,
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mach-mx31ads.c
index 938c549767dc..b3d1a1895c20 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mach-mx31ads.c
@@ -60,7 +60,7 @@
 static struct plat_serial8250_port serial_platform_data[] = {
 	{
 		.membase  = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTA),
-		.mapbase  = (unsigned long)(CS4_BASE_ADDR + PBC_SC16C652_UARTA),
+		.mapbase  = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTA),
 		.irq      = EXPIO_INT_XUART_INTA,
 		.uartclk  = 14745600,
 		.regshift = 0,
@@ -68,7 +68,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.flags    = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ,
 	}, {
 		.membase  = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTB),
-		.mapbase  = (unsigned long)(CS4_BASE_ADDR + PBC_SC16C652_UARTB),
+		.mapbase  = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTB),
 		.irq      = EXPIO_INT_XUART_INTB,
 		.uartclk  = 14745600,
 		.regshift = 0,
@@ -309,12 +309,8 @@ static struct regulator_init_data ldo1_data = {
 };
 
 static struct regulator_consumer_supply ldo2_consumers[] = {
-	{
-		.supply = "AVDD",
-	},
-	{
-		.supply = "HPVDD",
-	},
+	{ .supply = "AVDD", .dev_name = "1-001a" },
+	{ .supply = "HPVDD", .dev_name = "1-001a" },
 };
 
 /* CODEC and SIM */
@@ -385,8 +381,6 @@ static struct wm8350_audio_platform_data imx32ads_wm8350_setup = {
 
 static int mx31_wm8350_init(struct wm8350 *wm8350)
 {
-	int i;
-
 	wm8350_gpio_config(wm8350, 0, WM8350_GPIO_DIR_IN,
 			   WM8350_GPIO0_PWR_ON_IN, WM8350_GPIO_ACTIVE_LOW,
 			   WM8350_GPIO_PULL_UP, WM8350_GPIO_INVERT_OFF,
@@ -422,10 +416,6 @@ static int mx31_wm8350_init(struct wm8350 *wm8350)
 			   WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
 			   WM8350_GPIO_DEBOUNCE_OFF);
 
-	/* Fix up for our own supplies. */
-	for (i = 0; i < ARRAY_SIZE(ldo2_consumers); i++)
-		ldo2_consumers[i].dev = wm8350->dev;
-
 	wm8350_register_regulator(wm8350, WM8350_DCDC_1, &sw1a_data);
 	wm8350_register_regulator(wm8350, WM8350_DCDC_3, &viohi_data);
 	wm8350_register_regulator(wm8350, WM8350_DCDC_4, &violo_data);
@@ -493,14 +483,27 @@ static void mxc_init_i2c(void)
 }
 #endif
 
+static unsigned int ssi_pins[] = {
+	MX31_PIN_SFS5__SFS5,
+	MX31_PIN_SCK5__SCK5,
+	MX31_PIN_SRXD5__SRXD5,
+	MX31_PIN_STXD5__STXD5,
+};
+
+static void mxc_init_audio(void)
+{
+	mxc_register_device(&imx_ssi_device0, NULL);
+	mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi");
+}
+
 /*!
  * This structure defines static mappings for the i.MX31ADS board.
  */
 static struct map_desc mx31ads_io_desc[] __initdata = {
 	{
-		.virtual	= CS4_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(CS4_BASE_ADDR),
-		.length		= CS4_SIZE / 2,
+		.virtual	= MX31_CS4_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MX31_CS4_BASE_ADDR),
+		.length		= MX31_CS4_SIZE / 2,
 		.type		= MT_DEVICE
 	},
 };
@@ -528,6 +531,7 @@ static void __init mxc_board_init(void)
 	mxc_init_extuart();
 	mxc_init_imx_uart();
 	mxc_init_i2c();
+	mxc_init_audio();
 }
 
 static void __init mx31ads_timer_init(void)
@@ -545,9 +549,9 @@ static struct sys_timer mx31ads_timer = {
  */
 MACHINE_START(MX31ADS, "Freescale MX31ADS")
 	/* Maintainer: Freescale Semiconductor, Inc. */
-	.phys_io	= AIPS1_BASE_ADDR,
-	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
+	.phys_io	= MX31_AIPS1_BASE_ADDR,
+	.io_pg_offst	= (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
 	.map_io         = mx31ads_map_io,
 	.init_irq       = mx31ads_init_irq,
 	.init_machine   = mxc_board_init,
diff --git a/arch/arm/mach-mx3/mx31lilly.c b/arch/arm/mach-mx3/mach-mx31lilly.c
index 9ce029f554b9..80847b04c063 100644
--- a/arch/arm/mach-mx3/mx31lilly.c
+++ b/arch/arm/mach-mx3/mach-mx31lilly.c
@@ -57,8 +57,8 @@
 
 static struct resource smsc91x_resources[] = {
 	{
-		.start	= CS4_BASE_ADDR,
-		.end	= CS4_BASE_ADDR + 0xffff,
+		.start	= MX31_CS4_BASE_ADDR,
+		.end	= MX31_CS4_BASE_ADDR + 0xffff,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
@@ -195,9 +195,9 @@ static struct sys_timer mx31lilly_timer = {
 };
 
 MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
-	.phys_io	= AIPS1_BASE_ADDR,
-	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params	= PHYS_OFFSET + 0x100,
+	.phys_io	= MX31_AIPS1_BASE_ADDR,
+	.io_pg_offst	= (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+	.boot_params	= MX3x_PHYS_OFFSET + 0x100,
 	.map_io		= mx31_map_io,
 	.init_irq	= mx31_init_irq,
 	.init_machine	= mx31lilly_board_init,
diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mach-mx31lite.c
index 789b20d1730f..2b6d11400877 100644
--- a/arch/arm/mach-mx3/mx31lite.c
+++ b/arch/arm/mach-mx3/mach-mx31lite.c
@@ -82,8 +82,8 @@ static struct smsc911x_platform_config smsc911x_config = {
 
 static struct resource smsc911x_resources[] = {
 	{
-		.start		= CS4_BASE_ADDR,
-		.end		= CS4_BASE_ADDR + 0x100,
+		.start		= MX31_CS4_BASE_ADDR,
+		.end		= MX31_CS4_BASE_ADDR + 0x100,
 		.flags		= IORESOURCE_MEM,
 	}, {
 		.start		= IOMUX_TO_IRQ(MX31_PIN_SFS6),
@@ -214,9 +214,9 @@ static struct platform_device physmap_flash_device = {
  */
 static struct map_desc mx31lite_io_desc[] __initdata = {
 	{
-		.virtual = CS4_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(CS4_BASE_ADDR),
-		.length = CS4_SIZE,
+		.virtual = MX31_CS4_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR),
+		.length = MX31_CS4_SIZE,
 		.type = MT_DEVICE
 	}
 };
@@ -287,9 +287,9 @@ struct sys_timer mx31lite_timer = {
 
 MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
 	/* Maintainer: Freescale Semiconductor, Inc. */
-	.phys_io        = AIPS1_BASE_ADDR,
-	.io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
+	.phys_io        = MX31_AIPS1_BASE_ADDR,
+	.io_pg_offst    = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
 	.map_io         = mx31lite_map_io,
 	.init_irq       = mx31_init_irq,
 	.init_machine   = mxc_board_init,
diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mach-mx31moboard.c
index cfd605d078ec..a7dc5191bf5e 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mach-mx31moboard.c
@@ -96,9 +96,6 @@ static unsigned int moboard_pins[] = {
 	/* LEDs */
 	MX31_PIN_SVEN0__GPIO2_0, MX31_PIN_STX0__GPIO2_1,
 	MX31_PIN_SRX0__GPIO2_2, MX31_PIN_SIMPD0__GPIO2_3,
-	/* SEL */
-	MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
-	MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
 	/* SPI1 */
 	MX31_PIN_CSPI2_MOSI__MOSI, MX31_PIN_CSPI2_MISO__MISO,
 	MX31_PIN_CSPI2_SCLK__SCLK, MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
@@ -352,9 +349,7 @@ static struct fsl_usb2_platform_data usb_pdata = {
 
 static int moboard_usbh2_hw_init(struct platform_device *pdev)
 {
-	int ret = gpio_request(USBH2_EN_B, "usbh2-en");
-	if (ret)
-		return ret;
+	int ret;
 
 	mxc_iomux_set_gpr(MUX_PGP_UH2, true);
 
@@ -371,6 +366,9 @@ static int moboard_usbh2_hw_init(struct platform_device *pdev)
 	mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
 	mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
 
+	ret = gpio_request(USBH2_EN_B, "usbh2-en");
+	if (ret)
+		return ret;
 	gpio_direction_output(USBH2_EN_B, 0);
 
 	return 0;
@@ -431,34 +429,6 @@ static struct platform_device mx31moboard_leds_device = {
 	},
 };
 
-#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
-#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
-#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
-#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
-
-static void mx31moboard_init_sel_gpios(void)
-{
-	if (!gpio_request(SEL0, "sel0")) {
-		gpio_direction_input(SEL0);
-		gpio_export(SEL0, true);
-	}
-
-	if (!gpio_request(SEL1, "sel1")) {
-		gpio_direction_input(SEL1);
-		gpio_export(SEL1, true);
-	}
-
-	if (!gpio_request(SEL2, "sel2")) {
-		gpio_direction_input(SEL2);
-		gpio_export(SEL2, true);
-	}
-
-	if (!gpio_request(SEL3, "sel3")) {
-		gpio_direction_input(SEL3);
-		gpio_export(SEL3, true);
-	}
-}
-
 static struct ipu_platform_data mx3_ipu_data = {
 	.irq_base = MXC_IPU_IRQ_START,
 };
@@ -518,8 +488,6 @@ static void __init mxc_board_init(void)
 
 	mxc_register_device(&mxc_uart_device4, &uart4_pdata);
 
-	mx31moboard_init_sel_gpios();
-
 	mxc_register_device(&mxc_i2c_device0, &moboard_i2c0_pdata);
 	mxc_register_device(&mxc_i2c_device1, &moboard_i2c1_pdata);
 
@@ -552,6 +520,9 @@ static void __init mxc_board_init(void)
 	case MX31MARXBOT:
 		mx31moboard_marxbot_init();
 		break;
+	case MX31SMARTBOT:
+		mx31moboard_smartbot_init();
+		break;
 	default:
 		printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n",
 			mx31moboard_baseboard);
@@ -569,9 +540,9 @@ struct sys_timer mx31moboard_timer = {
 
 MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
 	/* Maintainer: Valentin Longchamp, EPFL Mobots group */
-	.phys_io	= AIPS1_BASE_ADDR,
-	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
+	.phys_io	= MX31_AIPS1_BASE_ADDR,
+	.io_pg_offst	= (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
 	.map_io         = mx31_map_io,
 	.init_irq       = mx31_init_irq,
 	.init_machine   = mxc_board_init,
diff --git a/arch/arm/mach-mx3/mx35pdk.c b/arch/arm/mach-mx3/mach-mx35pdk.c
index 0bbc65ea23c8..bcac84d4dca4 100644
--- a/arch/arm/mach-mx3/mx35pdk.c
+++ b/arch/arm/mach-mx3/mach-mx35pdk.c
@@ -106,9 +106,9 @@ struct sys_timer mx35pdk_timer = {
 
 MACHINE_START(MX35_3DS, "Freescale MX35PDK")
 	/* Maintainer: Freescale Semiconductor, Inc */
-	.phys_io	= AIPS1_BASE_ADDR,
-	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
+	.phys_io	= MX35_AIPS1_BASE_ADDR,
+	.io_pg_offst	= ((MX35_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
 	.map_io         = mx35_map_io,
 	.init_irq       = mx35_init_irq,
 	.init_machine   = mxc_board_init,
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/mach-pcm037.c
index 5be396917c99..11f531559169 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/mach-pcm037.c
@@ -33,6 +33,9 @@
 #include <linux/irq.h>
 #include <linux/fsl_devices.h>
 #include <linux/can/platform/sja1000.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/fsl_devices.h>
 
 #include <media/soc_camera.h>
 
@@ -51,6 +54,8 @@
 #include <mach/mx3_camera.h>
 #include <mach/mx3fb.h>
 #include <mach/mxc_nand.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
 
 #include "devices.h"
 #include "pcm037.h"
@@ -172,19 +177,7 @@ static unsigned int pcm037_pins[] = {
 	MX31_PIN_CSI_VSYNC__CSI_VSYNC,
 	/* GPIO */
 	IOMUX_MODE(MX31_PIN_ATA_DMACK, IOMUX_CONFIG_GPIO),
-};
-
-static struct physmap_flash_data pcm037_flash_data = {
-	.width  = 2,
-};
-
-static struct resource pcm037_flash_resource = {
-	.start	= 0xa0000000,
-	.end	= 0xa1ffffff,
-	.flags	= IORESOURCE_MEM,
-};
-
-static int usbotg_pins[] = {
+	/* OTG */
 	MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
 	MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
 	MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
@@ -197,39 +190,29 @@ static int usbotg_pins[] = {
 	MX31_PIN_USBOTG_DIR__USBOTG_DIR,
 	MX31_PIN_USBOTG_NXT__USBOTG_NXT,
 	MX31_PIN_USBOTG_STP__USBOTG_STP,
+	/* USB host 2 */
+	IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC),
 };
 
-/* USB OTG HS port */
-static int __init gpio_usbotg_hs_activate(void)
-{
-	int ret = mxc_iomux_setup_multiple_pins(usbotg_pins,
-					ARRAY_SIZE(usbotg_pins), "usbotg");
-
-	if (ret < 0) {
-		printk(KERN_ERR "Cannot set up OTG pins\n");
-		return ret;
-	}
-
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK,   PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR,   PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT,   PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP,   PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-
-	return 0;
-}
+static struct physmap_flash_data pcm037_flash_data = {
+	.width  = 2,
+};
 
-/* OTG config */
-static struct fsl_usb2_platform_data usb_pdata = {
-	.operating_mode	= FSL_USB2_DR_DEVICE,
-	.phy_mode	= FSL_USB2_PHY_ULPI,
+static struct resource pcm037_flash_resource = {
+	.start	= 0xa0000000,
+	.end	= 0xa1ffffff,
+	.flags	= IORESOURCE_MEM,
 };
 
 static struct platform_device pcm037_flash = {
@@ -248,8 +231,8 @@ static struct imxuart_platform_data uart_pdata = {
 
 static struct resource smsc911x_resources[] = {
 	{
-		.start		= CS1_BASE_ADDR + 0x300,
-		.end		= CS1_BASE_ADDR + 0x300 + SZ_64K - 1,
+		.start		= MX31_CS1_BASE_ADDR + 0x300,
+		.end		= MX31_CS1_BASE_ADDR + 0x300 + SZ_64K - 1,
 		.flags		= IORESOURCE_MEM,
 	}, {
 		.start		= IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
@@ -281,8 +264,8 @@ static struct platdata_mtd_ram pcm038_sram_data = {
 };
 
 static struct resource pcm038_sram_resource = {
-	.start = CS4_BASE_ADDR,
-	.end   = CS4_BASE_ADDR + 512 * 1024 - 1,
+	.start = MX31_CS4_BASE_ADDR,
+	.end   = MX31_CS4_BASE_ADDR + 512 * 1024 - 1,
 	.flags = IORESOURCE_MEM,
 };
 
@@ -536,8 +519,8 @@ static struct mx3fb_platform_data mx3fb_pdata = {
 
 static struct resource pcm970_sja1000_resources[] = {
 	{
-		.start   = CS5_BASE_ADDR,
-		.end     = CS5_BASE_ADDR + 0x100 - 1,
+		.start   = MX31_CS5_BASE_ADDR,
+		.end     = MX31_CS5_BASE_ADDR + 0x100 - 1,
 		.flags   = IORESOURCE_MEM,
 	}, {
 		.start   = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)),
@@ -561,16 +544,65 @@ static struct platform_device pcm970_sja1000 = {
 	.num_resources = ARRAY_SIZE(pcm970_sja1000_resources),
 };
 
+static struct mxc_usbh_platform_data otg_pdata = {
+	.portsc	= MXC_EHCI_MODE_ULPI,
+	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static struct mxc_usbh_platform_data usbh2_pdata = {
+	.portsc	= MXC_EHCI_MODE_ULPI,
+	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static struct fsl_usb2_platform_data otg_device_pdata = {
+	.operating_mode = FSL_USB2_DR_DEVICE,
+	.phy_mode       = FSL_USB2_PHY_ULPI,
+};
+
+static int otg_mode_host;
+
+static int __init pcm037_otg_mode(char *options)
+{
+	if (!strcmp(options, "host"))
+		otg_mode_host = 1;
+	else if (!strcmp(options, "device"))
+		otg_mode_host = 0;
+	else
+		pr_info("otg_mode neither \"host\" nor \"device\". "
+			"Defaulting to device\n");
+	return 0;
+}
+__setup("otg_mode=", pcm037_otg_mode);
+
 /*
  * Board specific initialization.
  */
 static void __init mxc_board_init(void)
 {
 	int ret;
+	u32 tmp;
+
+	mxc_iomux_set_gpr(MUX_PGP_UH2, 1);
 
 	mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins),
 			"pcm037");
 
+#define H2_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS \
+		| PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+	mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, H2_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, H2_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, H2_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_STP, H2_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, H2_PAD_CFG); /* USBH2_DATA0 */
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, H2_PAD_CFG); /* USBH2_DATA1 */
+	mxc_iomux_set_pad(MX31_PIN_SRXD6, H2_PAD_CFG);	/* USBH2_DATA2 */
+	mxc_iomux_set_pad(MX31_PIN_STXD6, H2_PAD_CFG);	/* USBH2_DATA3 */
+	mxc_iomux_set_pad(MX31_PIN_SFS3, H2_PAD_CFG);	/* USBH2_DATA4 */
+	mxc_iomux_set_pad(MX31_PIN_SCK3, H2_PAD_CFG);	/* USBH2_DATA5 */
+	mxc_iomux_set_pad(MX31_PIN_SRXD3, H2_PAD_CFG);	/* USBH2_DATA6 */
+	mxc_iomux_set_pad(MX31_PIN_STXD3, H2_PAD_CFG);	/* USBH2_DATA7 */
+
 	if (pcm037_variant() == PCM037_EET)
 		mxc_iomux_setup_multiple_pins(pcm037_uart1_pins,
 			ARRAY_SIZE(pcm037_uart1_pins), "pcm037_uart1");
@@ -608,8 +640,6 @@ static void __init mxc_board_init(void)
 	mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
 	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
 	mxc_register_device(&mx3_fb, &mx3fb_pdata);
-	if (!gpio_usbotg_hs_activate())
-		mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
 
 	/* CSI */
 	/* Camera power: default - off */
@@ -623,6 +653,23 @@ static void __init mxc_board_init(void)
 		mxc_register_device(&mx3_camera, &camera_pdata);
 
 	platform_device_register(&pcm970_sja1000);
+
+#if defined(CONFIG_USB_ULPI)
+	if (otg_mode_host) {
+		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+		mxc_register_device(&mxc_otg_host, &otg_pdata);
+	}
+
+	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+#endif
+	if (!otg_mode_host)
+		mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
+
 }
 
 static void __init pcm037_timer_init(void)
@@ -636,9 +683,9 @@ struct sys_timer pcm037_timer = {
 
 MACHINE_START(PCM037, "Phytec Phycore pcm037")
 	/* Maintainer: Pengutronix */
-	.phys_io	= AIPS1_BASE_ADDR,
-	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
+	.phys_io	= MX31_AIPS1_BASE_ADDR,
+	.io_pg_offst	= (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
 	.map_io         = mx31_map_io,
 	.init_irq       = mx31_init_irq,
 	.init_machine   = mxc_board_init,
diff --git a/arch/arm/mach-mx3/pcm037_eet.c b/arch/arm/mach-mx3/mach-pcm037_eet.c
index 8d386000fc40..8d386000fc40 100644
--- a/arch/arm/mach-mx3/pcm037_eet.c
+++ b/arch/arm/mach-mx3/mach-pcm037_eet.c
diff --git a/arch/arm/mach-mx3/pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c
index e3aa829be586..1bf1ec2eef5e 100644
--- a/arch/arm/mach-mx3/pcm043.c
+++ b/arch/arm/mach-mx3/mach-pcm043.c
@@ -26,8 +26,12 @@
 #include <linux/gpio.h>
 #include <linux/smc911x.h>
 #include <linux/interrupt.h>
+#include <linux/delay.h>
 #include <linux/i2c.h>
 #include <linux/i2c/at24.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/fsl_devices.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -44,6 +48,10 @@
 #include <mach/ipu.h>
 #include <mach/mx3fb.h>
 #include <mach/mxc_nand.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
+#include <mach/audmux.h>
+#include <mach/ssi.h>
 
 #include "devices.h"
 
@@ -205,6 +213,94 @@ static struct pad_desc pcm043_pads[] = {
 	MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS,
 	/* gpio */
 	MX35_PAD_ATA_CS0__GPIO2_6,
+	/* USB host */
+	MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR,
+	MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC,
+	/* SSI */
+	MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS,
+	MX35_PAD_STXD4__AUDMUX_AUD4_TXD,
+	MX35_PAD_SRXD4__AUDMUX_AUD4_RXD,
+	MX35_PAD_SCK4__AUDMUX_AUD4_TXC,
+};
+
+#define AC97_GPIO_TXFS	(1 * 32 + 31)
+#define AC97_GPIO_TXD	(1 * 32 + 28)
+#define AC97_GPIO_RESET	(1 * 32 + 0)
+
+static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97)
+{
+	struct pad_desc txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
+	struct pad_desc txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
+	int ret;
+
+	ret = gpio_request(AC97_GPIO_TXFS, "SSI");
+	if (ret) {
+		printk("failed to get GPIO_TXFS: %d\n", ret);
+		return;
+	}
+
+	mxc_iomux_v3_setup_pad(&txfs_gpio);
+
+	/* warm reset */
+	gpio_direction_output(AC97_GPIO_TXFS, 1);
+	udelay(2);
+	gpio_set_value(AC97_GPIO_TXFS, 0);
+
+	gpio_free(AC97_GPIO_TXFS);
+	mxc_iomux_v3_setup_pad(&txfs);
+}
+
+static void pcm043_ac97_cold_reset(struct snd_ac97 *ac97)
+{
+	struct pad_desc txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
+	struct pad_desc txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
+	struct pad_desc txd_gpio = MX35_PAD_STXD4__GPIO2_28;
+	struct pad_desc txd = MX35_PAD_STXD4__AUDMUX_AUD4_TXD;
+	struct pad_desc reset_gpio = MX35_PAD_SD2_CMD__GPIO2_0;
+	int ret;
+
+	ret = gpio_request(AC97_GPIO_TXFS, "SSI");
+	if (ret)
+		goto err1;
+
+	ret = gpio_request(AC97_GPIO_TXD, "SSI");
+	if (ret)
+		goto err2;
+
+	ret = gpio_request(AC97_GPIO_RESET, "SSI");
+	if (ret)
+		goto err3;
+
+	mxc_iomux_v3_setup_pad(&txfs_gpio);
+	mxc_iomux_v3_setup_pad(&txd_gpio);
+	mxc_iomux_v3_setup_pad(&reset_gpio);
+
+	gpio_direction_output(AC97_GPIO_TXFS, 0);
+	gpio_direction_output(AC97_GPIO_TXD, 0);
+
+	/* cold reset */
+	gpio_direction_output(AC97_GPIO_RESET, 0);
+	udelay(10);
+	gpio_direction_output(AC97_GPIO_RESET, 1);
+
+	mxc_iomux_v3_setup_pad(&txd);
+	mxc_iomux_v3_setup_pad(&txfs);
+
+	gpio_free(AC97_GPIO_RESET);
+err3:
+	gpio_free(AC97_GPIO_TXD);
+err2:
+	gpio_free(AC97_GPIO_TXFS);
+err1:
+	if (ret)
+		printk("%s failed with %d\n", __func__, ret);
+	mdelay(1);
+}
+
+static struct imx_ssi_platform_data pcm043_ssi_pdata = {
+	.ac97_reset = pcm043_ac97_cold_reset,
+	.ac97_warm_reset = pcm043_ac97_warm_reset,
+	.flags = IMX_SSI_USE_AC97,
 };
 
 static struct mxc_nand_platform_data pcm037_nand_board_info = {
@@ -212,6 +308,37 @@ static struct mxc_nand_platform_data pcm037_nand_board_info = {
 	.hw_ecc = 1,
 };
 
+static struct mxc_usbh_platform_data otg_pdata = {
+	.portsc	= MXC_EHCI_MODE_UTMI,
+	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static struct mxc_usbh_platform_data usbh1_pdata = {
+	.portsc	= MXC_EHCI_MODE_SERIAL,
+	.flags	= MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY |
+		  MXC_EHCI_IPPUE_DOWN,
+};
+
+static struct fsl_usb2_platform_data otg_device_pdata = {
+	.operating_mode = FSL_USB2_DR_DEVICE,
+	.phy_mode       = FSL_USB2_PHY_UTMI,
+};
+
+static int otg_mode_host;
+
+static int __init pcm043_otg_mode(char *options)
+{
+	if (!strcmp(options, "host"))
+		otg_mode_host = 1;
+	else if (!strcmp(options, "device"))
+		otg_mode_host = 0;
+	else
+		pr_info("otg_mode neither \"host\" nor \"device\". "
+			"Defaulting to device\n");
+	return 0;
+}
+__setup("otg_mode=", pcm043_otg_mode);
+
 /*
  * Board specific initialization.
  */
@@ -219,10 +346,23 @@ static void __init mxc_board_init(void)
 {
 	mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads));
 
+	mxc_audmux_v2_configure_port(3,
+			MXC_AUDMUX_V2_PTCR_SYN | /* 4wire mode */
+			MXC_AUDMUX_V2_PTCR_TFSEL(0) |
+			MXC_AUDMUX_V2_PTCR_TFSDIR,
+			MXC_AUDMUX_V2_PDCR_RXDSEL(0));
+
+	mxc_audmux_v2_configure_port(0,
+			MXC_AUDMUX_V2_PTCR_SYN | /* 4wire mode */
+			MXC_AUDMUX_V2_PTCR_TCSEL(3) |
+			MXC_AUDMUX_V2_PTCR_TCLKDIR, /* clock is output */
+			MXC_AUDMUX_V2_PDCR_RXDSEL(3));
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
 	mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
+	mxc_register_device(&imx_ssi_device0, &pcm043_ssi_pdata);
 
 	mxc_register_device(&mxc_uart_device1, &uart_pdata);
 
@@ -235,6 +375,20 @@ static void __init mxc_board_init(void)
 
 	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
 	mxc_register_device(&mx3_fb, &mx3fb_pdata);
+
+#if defined(CONFIG_USB_ULPI)
+	if (otg_mode_host) {
+		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+		mxc_register_device(&mxc_otg_host, &otg_pdata);
+	}
+
+	mxc_register_device(&mxc_usbh1, &usbh1_pdata);
+#endif
+	if (!otg_mode_host)
+		mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
+
 }
 
 static void __init pcm043_timer_init(void)
@@ -248,9 +402,9 @@ struct sys_timer pcm043_timer = {
 
 MACHINE_START(PCM043, "Phytec Phycore pcm043")
 	/* Maintainer: Pengutronix */
-	.phys_io	= AIPS1_BASE_ADDR,
-	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
+	.phys_io	= MX35_AIPS1_BASE_ADDR,
+	.io_pg_offst	= ((MX35_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
 	.map_io         = mx35_map_io,
 	.init_irq       = mx35_init_irq,
 	.init_machine   = mxc_board_init,
diff --git a/arch/arm/mach-mx3/qong.c b/arch/arm/mach-mx3/mach-qong.c
index 044511f1b9a9..e5b5b8323a17 100644
--- a/arch/arm/mach-mx3/qong.c
+++ b/arch/arm/mach-mx3/mach-qong.c
@@ -43,7 +43,7 @@
 #define QONG_FPGA_VERSION(major, minor, rev)	\
 	(((major & 0xF) << 12) | ((minor & 0xF) << 8) | (rev & 0xFF))
 
-#define QONG_FPGA_BASEADDR 		CS1_BASE_ADDR
+#define QONG_FPGA_BASEADDR 		MX31_CS1_BASE_ADDR
 #define QONG_FPGA_PERIPH_SIZE 		(1 << 24)
 
 #define QONG_FPGA_CTRL_BASEADDR		QONG_FPGA_BASEADDR
@@ -115,8 +115,8 @@ static struct physmap_flash_data qong_flash_data = {
 };
 
 static struct resource qong_flash_resource = {
-	.start = CS0_BASE_ADDR,
-	.end = CS0_BASE_ADDR + QONG_NOR_SIZE - 1,
+	.start = MX31_CS0_BASE_ADDR,
+	.end = MX31_CS0_BASE_ADDR + QONG_NOR_SIZE - 1,
 	.flags = IORESOURCE_MEM,
 };
 
@@ -180,8 +180,8 @@ static struct platform_nand_data qong_nand_data = {
 };
 
 static struct resource qong_nand_resource = {
-	.start  	= CS3_BASE_ADDR,
-	.end    	= CS3_BASE_ADDR + SZ_32M - 1,
+	.start  	= MX31_CS3_BASE_ADDR,
+	.end    	= MX31_CS3_BASE_ADDR + SZ_32M - 1,
 	.flags		= IORESOURCE_MEM,
 };
 
@@ -198,9 +198,7 @@ static struct platform_device qong_nand_device = {
 static void __init qong_init_nand_mtd(void)
 {
 	/* init CS */
-	__raw_writel(0x00004f00, CSCR_U(3));
-	__raw_writel(0x20013b31, CSCR_L(3));
-	__raw_writel(0x00020800, CSCR_A(3));
+	mx31_setup_weimcs(3, 0x00004f00, 0x20013b31, 0x00020800);
 	mxc_iomux_set_gpr(MUX_SDCTL_CSD1_SEL, true);
 
 	/* enable pin */
@@ -275,9 +273,9 @@ static struct sys_timer qong_timer = {
 
 MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
 	/* Maintainer: DENX Software Engineering GmbH */
-	.phys_io        = AIPS1_BASE_ADDR,
-	.io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
+	.phys_io        = MX31_AIPS1_BASE_ADDR,
+	.io_pg_offst    = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
 	.map_io         = mx31_map_io,
 	.init_irq       = mx31_init_irq,
 	.init_machine   = mxc_board_init,
diff --git a/arch/arm/mach-mx3/mx31lite-db.c b/arch/arm/mach-mx3/mx31lite-db.c
index 694611d6b057..ccd874225c3b 100644
--- a/arch/arm/mach-mx3/mx31lite-db.c
+++ b/arch/arm/mach-mx3/mx31lite-db.c
@@ -67,6 +67,13 @@ static unsigned int litekit_db_board_pins[] __initdata = {
 	MX31_PIN_CSPI1_SS0__SS0,
 	MX31_PIN_CSPI1_SS1__SS1,
 	MX31_PIN_CSPI1_SS2__SS2,
+	/* SDHC1 */
+	MX31_PIN_SD1_DATA0__SD1_DATA0,
+	MX31_PIN_SD1_DATA1__SD1_DATA1,
+	MX31_PIN_SD1_DATA2__SD1_DATA2,
+	MX31_PIN_SD1_DATA3__SD1_DATA3,
+	MX31_PIN_SD1_CLK__SD1_CLK,
+	MX31_PIN_SD1_CMD__SD1_CMD,
 };
 
 /* UART */
@@ -79,11 +86,11 @@ static struct imxuart_platform_data uart_pdata __initdata = {
 static int gpio_det, gpio_wp;
 
 #define MMC_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
-			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+		     PAD_CTL_ODE_CMOS)
 
 static int mxc_mmc1_get_ro(struct device *dev)
 {
-	return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_LCS0));
+	return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_GPIO1_6));
 }
 
 static int mxc_mmc1_init(struct device *dev,
@@ -94,12 +101,17 @@ static int mxc_mmc1_init(struct device *dev,
 	gpio_det = IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1);
 	gpio_wp = IOMUX_TO_GPIO(MX31_PIN_GPIO1_6);
 
-	mxc_iomux_set_pad(MX31_PIN_SD1_DATA0, MMC_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SD1_DATA1, MMC_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SD1_DATA2, MMC_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SD1_DATA3, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA0,
+			  MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA1,
+			  MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA2,
+			  MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA3,
+			  MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
+	mxc_iomux_set_pad(MX31_PIN_SD1_CMD,
+			  MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
 	mxc_iomux_set_pad(MX31_PIN_SD1_CLK, MMC_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SD1_CMD, MMC_PAD_CFG);
 
 	ret = gpio_request(gpio_det, "MMC detect");
 	if (ret)
@@ -113,7 +125,7 @@ static int mxc_mmc1_init(struct device *dev,
 	gpio_direction_input(gpio_wp);
 
 	ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_DCD_DCE1), detect_irq,
-			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+			  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
 			  "MMC detect", data);
 	if (ret)
 		goto exit_free_wp;
@@ -133,7 +145,7 @@ static void mxc_mmc1_exit(struct device *dev, void *data)
 {
 	gpio_free(gpio_det);
 	gpio_free(gpio_wp);
-	free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), data);
+	free_irq(IOMUX_TO_IRQ(MX31_PIN_DCD_DCE1), data);
 }
 
 static struct imxmmc_platform_data mmc_pdata = {
diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
index 438428eaf769..9fbad2eb3a49 100644
--- a/arch/arm/mach-mx3/mx31moboard-devboard.c
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -49,6 +49,9 @@ static unsigned int devboard_pins[] = {
 	MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB,
 	MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND,
 	MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12,
+	/* SEL */
+	MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
+	MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
 };
 
 static struct imxuart_platform_data uart_pdata = {
@@ -108,6 +111,33 @@ static struct imxmmc_platform_data sdhc2_pdata = {
 	.exit	= devboard_sdhc2_exit,
 };
 
+#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
+#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
+#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
+#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
+
+static void devboard_init_sel_gpios(void)
+{
+	if (!gpio_request(SEL0, "sel0")) {
+		gpio_direction_input(SEL0);
+		gpio_export(SEL0, true);
+	}
+
+	if (!gpio_request(SEL1, "sel1")) {
+		gpio_direction_input(SEL1);
+		gpio_export(SEL1, true);
+	}
+
+	if (!gpio_request(SEL2, "sel2")) {
+		gpio_direction_input(SEL2);
+		gpio_export(SEL2, true);
+	}
+
+	if (!gpio_request(SEL3, "sel3")) {
+		gpio_direction_input(SEL3);
+		gpio_export(SEL3, true);
+	}
+}
 #define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
 			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
 
@@ -196,5 +226,7 @@ void __init mx31moboard_devboard_init(void)
 
 	mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
 
+	devboard_init_sel_gpios();
+
 	devboard_usbh1_init();
 }
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index 1f44b9ccbb0f..3958515d75bf 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -66,6 +66,9 @@ static unsigned int marxbot_pins[] = {
 	MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB,
 	MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND,
 	MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12,
+	/* SEL */
+	MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
+	MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
 };
 
 #define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
@@ -127,12 +130,12 @@ static struct imxmmc_platform_data sdhc2_pdata = {
 static void dspics_resets_init(void)
 {
 	if (!gpio_request(TRSLAT_RST_B, "translator-rst")) {
-		gpio_direction_output(TRSLAT_RST_B, 1);
+		gpio_direction_output(TRSLAT_RST_B, 0);
 		gpio_export(TRSLAT_RST_B, false);
 	}
 
 	if (!gpio_request(DSPICS_RST_B, "dspics-rst")) {
-		gpio_direction_output(DSPICS_RST_B, 1);
+		gpio_direction_output(DSPICS_RST_B, 0);
 		gpio_export(DSPICS_RST_B, false);
 	}
 }
@@ -200,7 +203,7 @@ static int __init marxbot_cam_init(void)
 	int ret = gpio_request(CAM_CHOICE, "cam-choice");
 	if (ret)
 		return ret;
-	gpio_direction_output(CAM_CHOICE, 1);
+	gpio_direction_output(CAM_CHOICE, 0);
 
 	ret = gpio_request(BASECAM_RST_B, "basecam-reset");
 	if (ret)
@@ -223,6 +226,34 @@ static int __init marxbot_cam_init(void)
 	return 0;
 }
 
+#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
+#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
+#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
+#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
+
+static void marxbot_init_sel_gpios(void)
+{
+	if (!gpio_request(SEL0, "sel0")) {
+		gpio_direction_input(SEL0);
+		gpio_export(SEL0, true);
+	}
+
+	if (!gpio_request(SEL1, "sel1")) {
+		gpio_direction_input(SEL1);
+		gpio_export(SEL1, true);
+	}
+
+	if (!gpio_request(SEL2, "sel2")) {
+		gpio_direction_input(SEL2);
+		gpio_export(SEL2, true);
+	}
+
+	if (!gpio_request(SEL3, "sel3")) {
+		gpio_direction_input(SEL3);
+		gpio_export(SEL3, true);
+	}
+}
+
 #define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
 			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
 
@@ -307,6 +338,8 @@ void __init mx31moboard_marxbot_init(void)
 	mxc_iomux_setup_multiple_pins(marxbot_pins, ARRAY_SIZE(marxbot_pins),
 		"marxbot");
 
+	marxbot_init_sel_gpios();
+
 	dspics_resets_init();
 
 	mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
diff --git a/arch/arm/mach-mx3/mx31moboard-smartbot.c b/arch/arm/mach-mx3/mx31moboard-smartbot.c
new file mode 100644
index 000000000000..52a69fc8b14f
--- /dev/null
+++ b/arch/arm/mach-mx3/mx31moboard-smartbot.c
@@ -0,0 +1,162 @@
+/*
+ * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+
+#include <media/soc_camera.h>
+
+#include "devices.h"
+
+static unsigned int smartbot_pins[] = {
+	/* UART1 */
+	MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2,
+	MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2,
+	/* CSI */
+	MX31_PIN_CSI_D4__CSI_D4, MX31_PIN_CSI_D5__CSI_D5,
+	MX31_PIN_CSI_D6__CSI_D6, MX31_PIN_CSI_D7__CSI_D7,
+	MX31_PIN_CSI_D8__CSI_D8, MX31_PIN_CSI_D9__CSI_D9,
+	MX31_PIN_CSI_D10__CSI_D10, MX31_PIN_CSI_D11__CSI_D11,
+	MX31_PIN_CSI_D12__CSI_D12, MX31_PIN_CSI_D13__CSI_D13,
+	MX31_PIN_CSI_D14__CSI_D14, MX31_PIN_CSI_D15__CSI_D15,
+	MX31_PIN_CSI_HSYNC__CSI_HSYNC, MX31_PIN_CSI_MCLK__CSI_MCLK,
+	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC,
+	MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1,
+	/* ENABLES */
+	MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
+	MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+#define CAM_POWER	IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)
+#define CAM_RST_B	IOMUX_TO_GPIO(MX31_PIN_GPIO3_0)
+
+static int smartbot_cam_power(struct device *dev, int on)
+{
+	gpio_set_value(CAM_POWER, !on);
+	return 0;
+}
+
+static int smartbot_cam_reset(struct device *dev)
+{
+	gpio_set_value(CAM_RST_B, 0);
+	udelay(100);
+	gpio_set_value(CAM_RST_B, 1);
+	return 0;
+}
+
+static struct i2c_board_info smartbot_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("mt9t031", 0x5d),
+	},
+};
+
+static struct soc_camera_link base_iclink = {
+	.bus_id		= 0,		/* Must match with the camera ID */
+	.power		= smartbot_cam_power,
+	.reset		= smartbot_cam_reset,
+	.board_info	= &smartbot_i2c_devices[0],
+	.i2c_adapter_id	= 0,
+	.module_name	= "mt9t031",
+};
+
+static struct platform_device smartbot_camera[] = {
+	{
+		.name	= "soc-camera-pdrv",
+		.id	= 0,
+		.dev	= {
+			.platform_data = &base_iclink,
+		},
+	},
+};
+
+static struct platform_device *smartbot_cameras[] __initdata = {
+	&smartbot_camera[0],
+};
+
+static int __init smartbot_cam_init(void)
+{
+	int ret = gpio_request(CAM_RST_B, "cam-reset");
+	if (ret)
+		return ret;
+	gpio_direction_output(CAM_RST_B, 1);
+	ret = gpio_request(CAM_POWER, "cam-standby");
+	if (ret)
+		return ret;
+	gpio_direction_output(CAM_POWER, 0);
+
+	return 0;
+}
+
+#define POWER_EN IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
+#define DSPIC_RST_B IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
+#define TRSLAT_RST_B IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
+#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
+
+static void smartbot_resets_init(void)
+{
+	if (!gpio_request(POWER_EN, "power-enable")) {
+		gpio_direction_output(POWER_EN, 0);
+		gpio_export(POWER_EN, false);
+	}
+
+	if (!gpio_request(DSPIC_RST_B, "dspic-rst")) {
+		gpio_direction_output(DSPIC_RST_B, 0);
+		gpio_export(DSPIC_RST_B, false);
+	}
+
+	if (!gpio_request(TRSLAT_RST_B, "translator-rst")) {
+		gpio_direction_output(TRSLAT_RST_B, 0);
+		gpio_export(TRSLAT_RST_B, false);
+	}
+
+	if (!gpio_request(SEL3, "sel3")) {
+		gpio_direction_input(SEL3);
+		gpio_export(SEL3, true);
+	}
+}
+/*
+ * system init for baseboard usage. Will be called by mx31moboard init.
+ */
+void __init mx31moboard_smartbot_init(void)
+{
+	printk(KERN_INFO "Initializing mx31smartbot peripherals\n");
+
+	mxc_iomux_setup_multiple_pins(smartbot_pins, ARRAY_SIZE(smartbot_pins),
+		"smartbot");
+
+	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+
+	smartbot_resets_init();
+
+	smartbot_cam_init();
+	platform_add_devices(smartbot_cameras, ARRAY_SIZE(smartbot_cameras));
+}
diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
new file mode 100644
index 000000000000..1576d51e676c
--- /dev/null
+++ b/arch/arm/mach-mx5/Kconfig
@@ -0,0 +1,18 @@
+if ARCH_MX5
+
+config ARCH_MX51
+	bool
+	default y
+	select MXC_TZIC
+	select ARCH_MXC_IOMUX_V3
+
+comment "MX5 platforms:"
+
+config MACH_MX51_BABBAGE
+	bool "Support MX51 BABBAGE platforms"
+	help
+	  Include support for MX51 Babbage platform, also known as MX51EVK in
+	  u-boot. This includes specific configurations for the board and its
+	  peripherals.
+
+endif
diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile
new file mode 100644
index 000000000000..bf23f869ef51
--- /dev/null
+++ b/arch/arm/mach-mx5/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Object file lists.
+obj-y   := cpu.o mm.o clock-mx51.o devices.o
+
+obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o
+
diff --git a/arch/arm/mach-mx5/Makefile.boot b/arch/arm/mach-mx5/Makefile.boot
new file mode 100644
index 000000000000..9939a19d99a1
--- /dev/null
+++ b/arch/arm/mach-mx5/Makefile.boot
@@ -0,0 +1,3 @@
+   zreladdr-y	:= 0x90008000
+params_phys-y	:= 0x90000100
+initrd_phys-y	:= 0x90800000
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
new file mode 100644
index 000000000000..ee67a71db80d
--- /dev/null
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -0,0 +1,98 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx51.h>
+
+#include <asm/irq.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include "devices.h"
+
+static struct platform_device *devices[] __initdata = {
+	&mxc_fec_device,
+};
+
+static struct pad_desc mx51babbage_pads[] = {
+	/* UART1 */
+	MX51_PAD_UART1_RXD__UART1_RXD,
+	MX51_PAD_UART1_TXD__UART1_TXD,
+	MX51_PAD_UART1_RTS__UART1_RTS,
+	MX51_PAD_UART1_CTS__UART1_CTS,
+
+	/* UART2 */
+	MX51_PAD_UART2_RXD__UART2_RXD,
+	MX51_PAD_UART2_TXD__UART2_TXD,
+
+	/* UART3 */
+	MX51_PAD_EIM_D25__UART3_RXD,
+	MX51_PAD_EIM_D26__UART3_TXD,
+	MX51_PAD_EIM_D27__UART3_RTS,
+	MX51_PAD_EIM_D24__UART3_CTS,
+};
+
+/* Serial ports */
+#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static inline void mxc_init_imx_uart(void)
+{
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+	mxc_register_device(&mxc_uart_device2, &uart_pdata);
+}
+#else /* !SERIAL_IMX */
+static inline void mxc_init_imx_uart(void)
+{
+}
+#endif /* SERIAL_IMX */
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads,
+					ARRAY_SIZE(mx51babbage_pads));
+	mxc_init_imx_uart();
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init mx51_babbage_timer_init(void)
+{
+	mx51_clocks_init(32768, 24000000, 22579200, 0);
+}
+
+static struct sys_timer mxc_timer = {
+	.init	= mx51_babbage_timer_init,
+};
+
+MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board")
+	/* Maintainer: Amit Kucheria <amit.kucheria@canonical.com> */
+	.phys_io = MX51_AIPS1_BASE_ADDR,
+	.io_pg_offst = ((MX51_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params = PHYS_OFFSET + 0x100,
+	.map_io = mx51_map_io,
+	.init_irq = mx51_init_irq,
+	.init_machine = mxc_board_init,
+	.timer = &mxc_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51.c
new file mode 100644
index 000000000000..be90c03101cd
--- /dev/null
+++ b/arch/arm/mach-mx5/clock-mx51.c
@@ -0,0 +1,825 @@
+/*
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/clkdev.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/clock.h>
+
+#include "crm_regs.h"
+
+/* External clock values passed-in by the board code */
+static unsigned long external_high_reference, external_low_reference;
+static unsigned long oscillator_reference, ckih2_reference;
+
+static struct clk osc_clk;
+static struct clk pll1_main_clk;
+static struct clk pll1_sw_clk;
+static struct clk pll2_sw_clk;
+static struct clk pll3_sw_clk;
+static struct clk lp_apm_clk;
+static struct clk periph_apm_clk;
+static struct clk ahb_clk;
+static struct clk ipg_clk;
+
+#define MAX_DPLL_WAIT_TRIES	1000 /* 1000 * udelay(1) = 1ms */
+
+static int _clk_ccgr_enable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg |= MXC_CCM_CCGRx_MOD_ON << clk->enable_shift;
+	__raw_writel(reg, clk->enable_reg);
+
+	return 0;
+}
+
+static void _clk_ccgr_disable(struct clk *clk)
+{
+	u32 reg;
+	reg = __raw_readl(clk->enable_reg);
+	reg &= ~(MXC_CCM_CCGRx_MOD_OFF << clk->enable_shift);
+	__raw_writel(reg, clk->enable_reg);
+
+}
+
+static void _clk_ccgr_disable_inwait(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg &= ~(MXC_CCM_CCGRx_CG_MASK << clk->enable_shift);
+	reg |= MXC_CCM_CCGRx_MOD_IDLE << clk->enable_shift;
+	__raw_writel(reg, clk->enable_reg);
+}
+
+/*
+ * For the 4-to-1 muxed input clock
+ */
+static inline u32 _get_mux(struct clk *parent, struct clk *m0,
+			   struct clk *m1, struct clk *m2, struct clk *m3)
+{
+	if (parent == m0)
+		return 0;
+	else if (parent == m1)
+		return 1;
+	else if (parent == m2)
+		return 2;
+	else if (parent == m3)
+		return 3;
+	else
+		BUG();
+
+	return -EINVAL;
+}
+
+static inline void __iomem *_get_pll_base(struct clk *pll)
+{
+	if (pll == &pll1_main_clk)
+		return MX51_DPLL1_BASE;
+	else if (pll == &pll2_sw_clk)
+		return MX51_DPLL2_BASE;
+	else if (pll == &pll3_sw_clk)
+		return MX51_DPLL3_BASE;
+	else
+		BUG();
+
+	return NULL;
+}
+
+static unsigned long clk_pll_get_rate(struct clk *clk)
+{
+	long mfi, mfn, mfd, pdf, ref_clk, mfn_abs;
+	unsigned long dp_op, dp_mfd, dp_mfn, dp_ctl, pll_hfsm, dbl;
+	void __iomem *pllbase;
+	s64 temp;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	pllbase = _get_pll_base(clk);
+
+	dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+	pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
+	dbl = dp_ctl & MXC_PLL_DP_CTL_DPDCK0_2_EN;
+
+	if (pll_hfsm == 0) {
+		dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
+		dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
+		dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
+	} else {
+		dp_op = __raw_readl(pllbase + MXC_PLL_DP_HFS_OP);
+		dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFD);
+		dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFN);
+	}
+	pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK;
+	mfi = (dp_op & MXC_PLL_DP_OP_MFI_MASK) >> MXC_PLL_DP_OP_MFI_OFFSET;
+	mfi = (mfi <= 5) ? 5 : mfi;
+	mfd = dp_mfd & MXC_PLL_DP_MFD_MASK;
+	mfn = mfn_abs = dp_mfn & MXC_PLL_DP_MFN_MASK;
+	/* Sign extend to 32-bits */
+	if (mfn >= 0x04000000) {
+		mfn |= 0xFC000000;
+		mfn_abs = -mfn;
+	}
+
+	ref_clk = 2 * parent_rate;
+	if (dbl != 0)
+		ref_clk *= 2;
+
+	ref_clk /= (pdf + 1);
+	temp = (u64) ref_clk * mfn_abs;
+	do_div(temp, mfd + 1);
+	if (mfn < 0)
+		temp = -temp;
+	temp = (ref_clk * mfi) + temp;
+
+	return temp;
+}
+
+static int _clk_pll_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 reg;
+	void __iomem *pllbase;
+
+	long mfi, pdf, mfn, mfd = 999999;
+	s64 temp64;
+	unsigned long quad_parent_rate;
+	unsigned long pll_hfsm, dp_ctl;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	pllbase = _get_pll_base(clk);
+
+	quad_parent_rate = 4 * parent_rate;
+	pdf = mfi = -1;
+	while (++pdf < 16 && mfi < 5)
+		mfi = rate * (pdf+1) / quad_parent_rate;
+	if (mfi > 15)
+		return -EINVAL;
+	pdf--;
+
+	temp64 = rate * (pdf+1) - quad_parent_rate * mfi;
+	do_div(temp64, quad_parent_rate/1000000);
+	mfn = (long)temp64;
+
+	dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+	/* use dpdck0_2 */
+	__raw_writel(dp_ctl | 0x1000L, pllbase + MXC_PLL_DP_CTL);
+	pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
+	if (pll_hfsm == 0) {
+		reg = mfi << 4 | pdf;
+		__raw_writel(reg, pllbase + MXC_PLL_DP_OP);
+		__raw_writel(mfd, pllbase + MXC_PLL_DP_MFD);
+		__raw_writel(mfn, pllbase + MXC_PLL_DP_MFN);
+	} else {
+		reg = mfi << 4 | pdf;
+		__raw_writel(reg, pllbase + MXC_PLL_DP_HFS_OP);
+		__raw_writel(mfd, pllbase + MXC_PLL_DP_HFS_MFD);
+		__raw_writel(mfn, pllbase + MXC_PLL_DP_HFS_MFN);
+	}
+
+	return 0;
+}
+
+static int _clk_pll_enable(struct clk *clk)
+{
+	u32 reg;
+	void __iomem *pllbase;
+	int i = 0;
+
+	pllbase = _get_pll_base(clk);
+	reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) | MXC_PLL_DP_CTL_UPEN;
+	__raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
+
+	/* Wait for lock */
+	do {
+		reg = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+		if (reg & MXC_PLL_DP_CTL_LRF)
+			break;
+
+		udelay(1);
+	} while (++i < MAX_DPLL_WAIT_TRIES);
+
+	if (i == MAX_DPLL_WAIT_TRIES) {
+		pr_err("MX5: pll locking failed\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void _clk_pll_disable(struct clk *clk)
+{
+	u32 reg;
+	void __iomem *pllbase;
+
+	pllbase = _get_pll_base(clk);
+	reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) & ~MXC_PLL_DP_CTL_UPEN;
+	__raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
+}
+
+static int _clk_pll1_sw_set_parent(struct clk *clk, struct clk *parent)
+{
+	u32 reg, step;
+
+	reg = __raw_readl(MXC_CCM_CCSR);
+
+	/* When switching from pll_main_clk to a bypass clock, first select a
+	 * multiplexed clock in 'step_sel', then shift the glitchless mux
+	 * 'pll1_sw_clk_sel'.
+	 *
+	 * When switching back, do it in reverse order
+	 */
+	if (parent == &pll1_main_clk) {
+		/* Switch to pll1_main_clk */
+		reg &= ~MXC_CCM_CCSR_PLL1_SW_CLK_SEL;
+		__raw_writel(reg, MXC_CCM_CCSR);
+		/* step_clk mux switched to lp_apm, to save power. */
+		reg = __raw_readl(MXC_CCM_CCSR);
+		reg &= ~MXC_CCM_CCSR_STEP_SEL_MASK;
+		reg |= (MXC_CCM_CCSR_STEP_SEL_LP_APM <<
+				MXC_CCM_CCSR_STEP_SEL_OFFSET);
+	} else {
+		if (parent == &lp_apm_clk) {
+			step = MXC_CCM_CCSR_STEP_SEL_LP_APM;
+		} else  if (parent == &pll2_sw_clk) {
+			step = MXC_CCM_CCSR_STEP_SEL_PLL2_DIVIDED;
+		} else  if (parent == &pll3_sw_clk) {
+			step = MXC_CCM_CCSR_STEP_SEL_PLL3_DIVIDED;
+		} else
+			return -EINVAL;
+
+		reg &= ~MXC_CCM_CCSR_STEP_SEL_MASK;
+		reg |= (step << MXC_CCM_CCSR_STEP_SEL_OFFSET);
+
+		__raw_writel(reg, MXC_CCM_CCSR);
+		/* Switch to step_clk */
+		reg = __raw_readl(MXC_CCM_CCSR);
+		reg |= MXC_CCM_CCSR_PLL1_SW_CLK_SEL;
+	}
+	__raw_writel(reg, MXC_CCM_CCSR);
+	return 0;
+}
+
+static unsigned long clk_pll1_sw_get_rate(struct clk *clk)
+{
+	u32 reg, div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	reg = __raw_readl(MXC_CCM_CCSR);
+
+	if (clk->parent == &pll2_sw_clk) {
+		div = ((reg & MXC_CCM_CCSR_PLL2_PODF_MASK) >>
+		       MXC_CCM_CCSR_PLL2_PODF_OFFSET) + 1;
+	} else if (clk->parent == &pll3_sw_clk) {
+		div = ((reg & MXC_CCM_CCSR_PLL3_PODF_MASK) >>
+		       MXC_CCM_CCSR_PLL3_PODF_OFFSET) + 1;
+	} else
+		div = 1;
+	return parent_rate / div;
+}
+
+static int _clk_pll2_sw_set_parent(struct clk *clk, struct clk *parent)
+{
+	u32 reg;
+
+	reg = __raw_readl(MXC_CCM_CCSR);
+
+	if (parent == &pll2_sw_clk)
+		reg &= ~MXC_CCM_CCSR_PLL2_SW_CLK_SEL;
+	else
+		reg |= MXC_CCM_CCSR_PLL2_SW_CLK_SEL;
+
+	__raw_writel(reg, MXC_CCM_CCSR);
+	return 0;
+}
+
+static int _clk_lp_apm_set_parent(struct clk *clk, struct clk *parent)
+{
+	u32 reg;
+
+	if (parent == &osc_clk)
+		reg = __raw_readl(MXC_CCM_CCSR) & ~MXC_CCM_CCSR_LP_APM_SEL;
+	else
+		return -EINVAL;
+
+	__raw_writel(reg, MXC_CCM_CCSR);
+
+	return 0;
+}
+
+static unsigned long clk_arm_get_rate(struct clk *clk)
+{
+	u32 cacrr, div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+	cacrr = __raw_readl(MXC_CCM_CACRR);
+	div = (cacrr & MXC_CCM_CACRR_ARM_PODF_MASK) + 1;
+
+	return parent_rate / div;
+}
+
+static int _clk_periph_apm_set_parent(struct clk *clk, struct clk *parent)
+{
+	u32 reg, mux;
+	int i = 0;
+
+	mux = _get_mux(parent, &pll1_sw_clk, &pll3_sw_clk, &lp_apm_clk, NULL);
+
+	reg = __raw_readl(MXC_CCM_CBCMR) & ~MXC_CCM_CBCMR_PERIPH_CLK_SEL_MASK;
+	reg |= mux << MXC_CCM_CBCMR_PERIPH_CLK_SEL_OFFSET;
+	__raw_writel(reg, MXC_CCM_CBCMR);
+
+	/* Wait for lock */
+	do {
+		reg = __raw_readl(MXC_CCM_CDHIPR);
+		if (!(reg &  MXC_CCM_CDHIPR_PERIPH_CLK_SEL_BUSY))
+			break;
+
+		udelay(1);
+	} while (++i < MAX_DPLL_WAIT_TRIES);
+
+	if (i == MAX_DPLL_WAIT_TRIES) {
+		pr_err("MX5: Set parent for periph_apm clock failed\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int _clk_main_bus_set_parent(struct clk *clk, struct clk *parent)
+{
+	u32 reg;
+
+	reg = __raw_readl(MXC_CCM_CBCDR);
+
+	if (parent == &pll2_sw_clk)
+		reg &= ~MXC_CCM_CBCDR_PERIPH_CLK_SEL;
+	else if (parent == &periph_apm_clk)
+		reg |= MXC_CCM_CBCDR_PERIPH_CLK_SEL;
+	else
+		return -EINVAL;
+
+	__raw_writel(reg, MXC_CCM_CBCDR);
+
+	return 0;
+}
+
+static struct clk main_bus_clk = {
+	.parent = &pll2_sw_clk,
+	.set_parent = _clk_main_bus_set_parent,
+};
+
+static unsigned long clk_ahb_get_rate(struct clk *clk)
+{
+	u32 reg, div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	reg = __raw_readl(MXC_CCM_CBCDR);
+	div = ((reg & MXC_CCM_CBCDR_AHB_PODF_MASK) >>
+	       MXC_CCM_CBCDR_AHB_PODF_OFFSET) + 1;
+	return parent_rate / div;
+}
+
+
+static int _clk_ahb_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 reg, div;
+	unsigned long parent_rate;
+	int i = 0;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+	if (div > 8 || div < 1 || ((parent_rate / div) != rate))
+		return -EINVAL;
+
+	reg = __raw_readl(MXC_CCM_CBCDR);
+	reg &= ~MXC_CCM_CBCDR_AHB_PODF_MASK;
+	reg |= (div - 1) << MXC_CCM_CBCDR_AHB_PODF_OFFSET;
+	__raw_writel(reg, MXC_CCM_CBCDR);
+
+	/* Wait for lock */
+	do {
+		reg = __raw_readl(MXC_CCM_CDHIPR);
+		if (!(reg & MXC_CCM_CDHIPR_AHB_PODF_BUSY))
+			break;
+
+		udelay(1);
+	} while (++i < MAX_DPLL_WAIT_TRIES);
+
+	if (i == MAX_DPLL_WAIT_TRIES) {
+		pr_err("MX5: clk_ahb_set_rate failed\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static unsigned long _clk_ahb_round_rate(struct clk *clk,
+						unsigned long rate)
+{
+	u32 div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+	if (div > 8)
+		div = 8;
+	else if (div == 0)
+		div++;
+	return parent_rate / div;
+}
+
+
+static int _clk_max_enable(struct clk *clk)
+{
+	u32 reg;
+
+	_clk_ccgr_enable(clk);
+
+	/* Handshake with MAX when LPM is entered. */
+	reg = __raw_readl(MXC_CCM_CLPCR);
+	reg &= ~MXC_CCM_CLPCR_BYPASS_MAX_LPM_HS;
+	__raw_writel(reg, MXC_CCM_CLPCR);
+
+	return 0;
+}
+
+static void _clk_max_disable(struct clk *clk)
+{
+	u32 reg;
+
+	_clk_ccgr_disable_inwait(clk);
+
+	/* No Handshake with MAX when LPM is entered as its disabled. */
+	reg = __raw_readl(MXC_CCM_CLPCR);
+	reg |= MXC_CCM_CLPCR_BYPASS_MAX_LPM_HS;
+	__raw_writel(reg, MXC_CCM_CLPCR);
+}
+
+static unsigned long clk_ipg_get_rate(struct clk *clk)
+{
+	u32 reg, div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	reg = __raw_readl(MXC_CCM_CBCDR);
+	div = ((reg & MXC_CCM_CBCDR_IPG_PODF_MASK) >>
+	       MXC_CCM_CBCDR_IPG_PODF_OFFSET) + 1;
+
+	return parent_rate / div;
+}
+
+static unsigned long clk_ipg_per_get_rate(struct clk *clk)
+{
+	u32 reg, prediv1, prediv2, podf;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	if (clk->parent == &main_bus_clk || clk->parent == &lp_apm_clk) {
+		/* the main_bus_clk is the one before the DVFS engine */
+		reg = __raw_readl(MXC_CCM_CBCDR);
+		prediv1 = ((reg & MXC_CCM_CBCDR_PERCLK_PRED1_MASK) >>
+			   MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET) + 1;
+		prediv2 = ((reg & MXC_CCM_CBCDR_PERCLK_PRED2_MASK) >>
+			   MXC_CCM_CBCDR_PERCLK_PRED2_OFFSET) + 1;
+		podf = ((reg & MXC_CCM_CBCDR_PERCLK_PODF_MASK) >>
+			MXC_CCM_CBCDR_PERCLK_PODF_OFFSET) + 1;
+		return parent_rate / (prediv1 * prediv2 * podf);
+	} else if (clk->parent == &ipg_clk)
+		return parent_rate;
+	else
+		BUG();
+}
+
+static int _clk_ipg_per_set_parent(struct clk *clk, struct clk *parent)
+{
+	u32 reg;
+
+	reg = __raw_readl(MXC_CCM_CBCMR);
+
+	reg &= ~MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL;
+	reg &= ~MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL;
+
+	if (parent == &ipg_clk)
+		reg |= MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL;
+	else if (parent == &lp_apm_clk)
+		reg |= MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL;
+	else if (parent != &main_bus_clk)
+		return -EINVAL;
+
+	__raw_writel(reg, MXC_CCM_CBCMR);
+
+	return 0;
+}
+
+static unsigned long clk_uart_get_rate(struct clk *clk)
+{
+	u32 reg, prediv, podf;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	reg = __raw_readl(MXC_CCM_CSCDR1);
+	prediv = ((reg & MXC_CCM_CSCDR1_UART_CLK_PRED_MASK) >>
+		  MXC_CCM_CSCDR1_UART_CLK_PRED_OFFSET) + 1;
+	podf = ((reg & MXC_CCM_CSCDR1_UART_CLK_PODF_MASK) >>
+		MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET) + 1;
+
+	return parent_rate / (prediv * podf);
+}
+
+static int _clk_uart_set_parent(struct clk *clk, struct clk *parent)
+{
+	u32 reg, mux;
+
+	mux = _get_mux(parent, &pll1_sw_clk, &pll2_sw_clk, &pll3_sw_clk,
+		       &lp_apm_clk);
+	reg = __raw_readl(MXC_CCM_CSCMR1) & ~MXC_CCM_CSCMR1_UART_CLK_SEL_MASK;
+	reg |= mux << MXC_CCM_CSCMR1_UART_CLK_SEL_OFFSET;
+	__raw_writel(reg, MXC_CCM_CSCMR1);
+
+	return 0;
+}
+
+static unsigned long get_high_reference_clock_rate(struct clk *clk)
+{
+	return external_high_reference;
+}
+
+static unsigned long get_low_reference_clock_rate(struct clk *clk)
+{
+	return external_low_reference;
+}
+
+static unsigned long get_oscillator_reference_clock_rate(struct clk *clk)
+{
+	return oscillator_reference;
+}
+
+static unsigned long get_ckih2_reference_clock_rate(struct clk *clk)
+{
+	return ckih2_reference;
+}
+
+/* External high frequency clock */
+static struct clk ckih_clk = {
+	.get_rate = get_high_reference_clock_rate,
+};
+
+static struct clk ckih2_clk = {
+	.get_rate = get_ckih2_reference_clock_rate,
+};
+
+static struct clk osc_clk = {
+	.get_rate = get_oscillator_reference_clock_rate,
+};
+
+/* External low frequency (32kHz) clock */
+static struct clk ckil_clk = {
+	.get_rate = get_low_reference_clock_rate,
+};
+
+static struct clk pll1_main_clk = {
+	.parent = &osc_clk,
+	.get_rate = clk_pll_get_rate,
+	.enable = _clk_pll_enable,
+	.disable = _clk_pll_disable,
+};
+
+/* Clock tree block diagram (WIP):
+ * 	CCM: Clock Controller Module
+ *
+ * PLL output -> |
+ *               | CCM Switcher -> CCM_CLK_ROOT_GEN ->
+ * PLL bypass -> |
+ *
+ */
+
+/* PLL1 SW supplies to ARM core */
+static struct clk pll1_sw_clk = {
+	.parent = &pll1_main_clk,
+	.set_parent = _clk_pll1_sw_set_parent,
+	.get_rate = clk_pll1_sw_get_rate,
+};
+
+/* PLL2 SW supplies to AXI/AHB/IP buses */
+static struct clk pll2_sw_clk = {
+	.parent = &osc_clk,
+	.get_rate = clk_pll_get_rate,
+	.set_rate = _clk_pll_set_rate,
+	.set_parent = _clk_pll2_sw_set_parent,
+	.enable = _clk_pll_enable,
+	.disable = _clk_pll_disable,
+};
+
+/* PLL3 SW supplies to serial clocks like USB, SSI, etc. */
+static struct clk pll3_sw_clk = {
+	.parent = &osc_clk,
+	.set_rate = _clk_pll_set_rate,
+	.get_rate = clk_pll_get_rate,
+	.enable = _clk_pll_enable,
+	.disable = _clk_pll_disable,
+};
+
+/* Low-power Audio Playback Mode clock */
+static struct clk lp_apm_clk = {
+	.parent = &osc_clk,
+	.set_parent = _clk_lp_apm_set_parent,
+};
+
+static struct clk periph_apm_clk = {
+	.parent = &pll1_sw_clk,
+	.set_parent = _clk_periph_apm_set_parent,
+};
+
+static struct clk cpu_clk = {
+	.parent = &pll1_sw_clk,
+	.get_rate = clk_arm_get_rate,
+};
+
+static struct clk ahb_clk = {
+	.parent = &main_bus_clk,
+	.get_rate = clk_ahb_get_rate,
+	.set_rate = _clk_ahb_set_rate,
+	.round_rate = _clk_ahb_round_rate,
+};
+
+/* Main IP interface clock for access to registers */
+static struct clk ipg_clk = {
+	.parent = &ahb_clk,
+	.get_rate = clk_ipg_get_rate,
+};
+
+static struct clk ipg_perclk = {
+	.parent = &lp_apm_clk,
+	.get_rate = clk_ipg_per_get_rate,
+	.set_parent = _clk_ipg_per_set_parent,
+};
+
+static struct clk uart_root_clk = {
+	.parent = &pll2_sw_clk,
+	.get_rate = clk_uart_get_rate,
+	.set_parent = _clk_uart_set_parent,
+};
+
+static struct clk ahb_max_clk = {
+	.parent = &ahb_clk,
+	.enable_reg = MXC_CCM_CCGR0,
+	.enable_shift = MXC_CCM_CCGRx_CG14_OFFSET,
+	.enable = _clk_max_enable,
+	.disable = _clk_max_disable,
+};
+
+static struct clk aips_tz1_clk = {
+	.parent = &ahb_clk,
+	.secondary = &ahb_max_clk,
+	.enable_reg = MXC_CCM_CCGR0,
+	.enable_shift = MXC_CCM_CCGRx_CG12_OFFSET,
+	.enable = _clk_ccgr_enable,
+	.disable = _clk_ccgr_disable_inwait,
+};
+
+static struct clk aips_tz2_clk = {
+	.parent = &ahb_clk,
+	.secondary = &ahb_max_clk,
+	.enable_reg = MXC_CCM_CCGR0,
+	.enable_shift = MXC_CCM_CCGRx_CG13_OFFSET,
+	.enable = _clk_ccgr_enable,
+	.disable = _clk_ccgr_disable_inwait,
+};
+
+static struct clk gpt_32k_clk = {
+	.id = 0,
+	.parent = &ckil_clk,
+};
+
+#define DEFINE_CLOCK(name, i, er, es, gr, sr, p, s)	\
+	static struct clk name = {			\
+		.id		= i,			\
+		.enable_reg	= er,			\
+		.enable_shift	= es,			\
+		.get_rate	= gr,			\
+		.set_rate	= sr,			\
+		.enable		= _clk_ccgr_enable,	\
+		.disable	= _clk_ccgr_disable,	\
+		.parent		= p,			\
+		.secondary	= s,			\
+	}
+
+/* DEFINE_CLOCK(name, id, enable_reg, enable_shift,
+   get_rate, set_rate, parent, secondary); */
+
+/* Shared peripheral bus arbiter */
+DEFINE_CLOCK(spba_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG0_OFFSET,
+	NULL,  NULL, &ipg_clk, NULL);
+
+/* UART */
+DEFINE_CLOCK(uart1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG4_OFFSET,
+	NULL,  NULL, &uart_root_clk, NULL);
+DEFINE_CLOCK(uart2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG6_OFFSET,
+	NULL,  NULL, &uart_root_clk, NULL);
+DEFINE_CLOCK(uart3_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG8_OFFSET,
+	NULL,  NULL, &uart_root_clk, NULL);
+DEFINE_CLOCK(uart1_ipg_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG3_OFFSET,
+	NULL,  NULL, &ipg_clk, &aips_tz1_clk);
+DEFINE_CLOCK(uart2_ipg_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG5_OFFSET,
+	NULL,  NULL, &ipg_clk, &aips_tz1_clk);
+DEFINE_CLOCK(uart3_ipg_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG7_OFFSET,
+	NULL,  NULL, &ipg_clk, &spba_clk);
+
+/* GPT */
+DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET,
+	NULL,  NULL, &ipg_perclk, NULL);
+DEFINE_CLOCK(gpt_ipg_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG10_OFFSET,
+	NULL,  NULL, &ipg_clk, NULL);
+
+/* FEC */
+DEFINE_CLOCK(fec_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG12_OFFSET,
+	NULL,  NULL, &ipg_clk, NULL);
+
+#define _REGISTER_CLOCK(d, n, c) \
+       { \
+		.dev_id = d, \
+		.con_id = n, \
+		.clk = &c,   \
+       },
+
+static struct clk_lookup lookups[] = {
+	_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
+	_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
+	_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
+	_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
+	_REGISTER_CLOCK("fec.0", NULL, fec_clk)
+};
+
+static void clk_tree_init(void)
+{
+	u32 reg;
+
+	ipg_perclk.set_parent(&ipg_perclk, &lp_apm_clk);
+
+	/*
+	 * Initialise the IPG PER CLK dividers to 3. IPG_PER_CLK should be at
+	 * 8MHz, its derived from lp_apm.
+	 *
+	 * FIXME: Verify if true for all boards
+	 */
+	reg = __raw_readl(MXC_CCM_CBCDR);
+	reg &= ~MXC_CCM_CBCDR_PERCLK_PRED1_MASK;
+	reg &= ~MXC_CCM_CBCDR_PERCLK_PRED2_MASK;
+	reg &= ~MXC_CCM_CBCDR_PERCLK_PODF_MASK;
+	reg |= (2 << MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET);
+	__raw_writel(reg, MXC_CCM_CBCDR);
+}
+
+int __init mx51_clocks_init(unsigned long ckil, unsigned long osc,
+			unsigned long ckih1, unsigned long ckih2)
+{
+	int i;
+
+	external_low_reference = ckil;
+	external_high_reference = ckih1;
+	ckih2_reference = ckih2;
+	oscillator_reference = osc;
+
+	for (i = 0; i < ARRAY_SIZE(lookups); i++)
+		clkdev_add(&lookups[i]);
+
+	clk_tree_init();
+
+	clk_enable(&cpu_clk);
+	clk_enable(&main_bus_clk);
+
+	/* System timer */
+	mxc_timer_init(&gpt_clk, MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR),
+		MX51_MXC_INT_GPT);
+	return 0;
+}
diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c
new file mode 100644
index 000000000000..41c769f08c4d
--- /dev/null
+++ b/arch/arm/mach-mx5/cpu.c
@@ -0,0 +1,47 @@
+/*
+ * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ *
+ * This file contains the CPU initialization code.
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <mach/hardware.h>
+#include <asm/io.h>
+
+static int __init post_cpu_init(void)
+{
+	unsigned int reg;
+	void __iomem *base;
+
+	if (!cpu_is_mx51())
+		return 0;
+
+	base = MX51_IO_ADDRESS(MX51_AIPS1_BASE_ADDR);
+	__raw_writel(0x0, base + 0x40);
+	__raw_writel(0x0, base + 0x44);
+	__raw_writel(0x0, base + 0x48);
+	__raw_writel(0x0, base + 0x4C);
+	reg = __raw_readl(base + 0x50) & 0x00FFFFFF;
+	__raw_writel(reg, base + 0x50);
+
+	base = MX51_IO_ADDRESS(MX51_AIPS2_BASE_ADDR);
+	__raw_writel(0x0, base + 0x40);
+	__raw_writel(0x0, base + 0x44);
+	__raw_writel(0x0, base + 0x48);
+	__raw_writel(0x0, base + 0x4C);
+	reg = __raw_readl(base + 0x50) & 0x00FFFFFF;
+	__raw_writel(reg, base + 0x50);
+
+	return 0;
+}
+
+postcore_initcall(post_cpu_init);
diff --git a/arch/arm/mach-mx5/crm_regs.h b/arch/arm/mach-mx5/crm_regs.h
new file mode 100644
index 000000000000..c776b9af0624
--- /dev/null
+++ b/arch/arm/mach-mx5/crm_regs.h
@@ -0,0 +1,583 @@
+/*
+ * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ARCH_ARM_MACH_MX51_CRM_REGS_H__
+#define __ARCH_ARM_MACH_MX51_CRM_REGS_H__
+
+#define MX51_CCM_BASE		MX51_IO_ADDRESS(MX51_CCM_BASE_ADDR)
+#define MX51_DPLL1_BASE		MX51_IO_ADDRESS(MX51_PLL1_BASE_ADDR)
+#define MX51_DPLL2_BASE		MX51_IO_ADDRESS(MX51_PLL2_BASE_ADDR)
+#define MX51_DPLL3_BASE		MX51_IO_ADDRESS(MX51_PLL3_BASE_ADDR)
+#define MX51_CORTEXA8_BASE	MX51_IO_ADDRESS(MX51_ARM_BASE_ADDR)
+#define MX51_GPC_BASE		MX51_IO_ADDRESS(MX51_GPC_BASE_ADDR)
+
+/* PLL Register Offsets */
+#define MXC_PLL_DP_CTL			0x00
+#define MXC_PLL_DP_CONFIG		0x04
+#define MXC_PLL_DP_OP			0x08
+#define MXC_PLL_DP_MFD			0x0C
+#define MXC_PLL_DP_MFN			0x10
+#define MXC_PLL_DP_MFNMINUS		0x14
+#define MXC_PLL_DP_MFNPLUS		0x18
+#define MXC_PLL_DP_HFS_OP		0x1C
+#define MXC_PLL_DP_HFS_MFD		0x20
+#define MXC_PLL_DP_HFS_MFN		0x24
+#define MXC_PLL_DP_MFN_TOGC		0x28
+#define MXC_PLL_DP_DESTAT		0x2c
+
+/* PLL Register Bit definitions */
+#define MXC_PLL_DP_CTL_MUL_CTRL		0x2000
+#define MXC_PLL_DP_CTL_DPDCK0_2_EN	0x1000
+#define MXC_PLL_DP_CTL_DPDCK0_2_OFFSET	12
+#define MXC_PLL_DP_CTL_ADE		0x800
+#define MXC_PLL_DP_CTL_REF_CLK_DIV	0x400
+#define MXC_PLL_DP_CTL_REF_CLK_SEL_MASK	(3 << 8)
+#define MXC_PLL_DP_CTL_REF_CLK_SEL_OFFSET	8
+#define MXC_PLL_DP_CTL_HFSM		0x80
+#define MXC_PLL_DP_CTL_PRE		0x40
+#define MXC_PLL_DP_CTL_UPEN		0x20
+#define MXC_PLL_DP_CTL_RST		0x10
+#define MXC_PLL_DP_CTL_RCP		0x8
+#define MXC_PLL_DP_CTL_PLM		0x4
+#define MXC_PLL_DP_CTL_BRM0		0x2
+#define MXC_PLL_DP_CTL_LRF		0x1
+
+#define MXC_PLL_DP_CONFIG_BIST		0x8
+#define MXC_PLL_DP_CONFIG_SJC_CE	0x4
+#define MXC_PLL_DP_CONFIG_AREN		0x2
+#define MXC_PLL_DP_CONFIG_LDREQ		0x1
+
+#define MXC_PLL_DP_OP_MFI_OFFSET	4
+#define MXC_PLL_DP_OP_MFI_MASK		(0xF << 4)
+#define MXC_PLL_DP_OP_PDF_OFFSET	0
+#define MXC_PLL_DP_OP_PDF_MASK		0xF
+
+#define MXC_PLL_DP_MFD_OFFSET		0
+#define MXC_PLL_DP_MFD_MASK		0x07FFFFFF
+
+#define MXC_PLL_DP_MFN_OFFSET		0x0
+#define MXC_PLL_DP_MFN_MASK		0x07FFFFFF
+
+#define MXC_PLL_DP_MFN_TOGC_TOG_DIS	(1 << 17)
+#define MXC_PLL_DP_MFN_TOGC_TOG_EN	(1 << 16)
+#define MXC_PLL_DP_MFN_TOGC_CNT_OFFSET	0x0
+#define MXC_PLL_DP_MFN_TOGC_CNT_MASK	0xFFFF
+
+#define MXC_PLL_DP_DESTAT_TOG_SEL	(1 << 31)
+#define MXC_PLL_DP_DESTAT_MFN		0x07FFFFFF
+
+/* Register addresses of CCM*/
+#define MXC_CCM_CCR		(MX51_CCM_BASE + 0x00)
+#define MXC_CCM_CCDR		(MX51_CCM_BASE + 0x04)
+#define MXC_CCM_CSR		(MX51_CCM_BASE + 0x08)
+#define MXC_CCM_CCSR		(MX51_CCM_BASE + 0x0C)
+#define MXC_CCM_CACRR		(MX51_CCM_BASE + 0x10)
+#define MXC_CCM_CBCDR		(MX51_CCM_BASE + 0x14)
+#define MXC_CCM_CBCMR		(MX51_CCM_BASE + 0x18)
+#define MXC_CCM_CSCMR1		(MX51_CCM_BASE + 0x1C)
+#define MXC_CCM_CSCMR2		(MX51_CCM_BASE + 0x20)
+#define MXC_CCM_CSCDR1		(MX51_CCM_BASE + 0x24)
+#define MXC_CCM_CS1CDR		(MX51_CCM_BASE + 0x28)
+#define MXC_CCM_CS2CDR		(MX51_CCM_BASE + 0x2C)
+#define MXC_CCM_CDCDR		(MX51_CCM_BASE + 0x30)
+#define MXC_CCM_CHSCDR		(MX51_CCM_BASE + 0x34)
+#define MXC_CCM_CSCDR2		(MX51_CCM_BASE + 0x38)
+#define MXC_CCM_CSCDR3		(MX51_CCM_BASE + 0x3C)
+#define MXC_CCM_CSCDR4		(MX51_CCM_BASE + 0x40)
+#define MXC_CCM_CWDR		(MX51_CCM_BASE + 0x44)
+#define MXC_CCM_CDHIPR		(MX51_CCM_BASE + 0x48)
+#define MXC_CCM_CDCR		(MX51_CCM_BASE + 0x4C)
+#define MXC_CCM_CTOR		(MX51_CCM_BASE + 0x50)
+#define MXC_CCM_CLPCR		(MX51_CCM_BASE + 0x54)
+#define MXC_CCM_CISR		(MX51_CCM_BASE + 0x58)
+#define MXC_CCM_CIMR		(MX51_CCM_BASE + 0x5C)
+#define MXC_CCM_CCOSR		(MX51_CCM_BASE + 0x60)
+#define MXC_CCM_CGPR		(MX51_CCM_BASE + 0x64)
+#define MXC_CCM_CCGR0		(MX51_CCM_BASE + 0x68)
+#define MXC_CCM_CCGR1		(MX51_CCM_BASE + 0x6C)
+#define MXC_CCM_CCGR2		(MX51_CCM_BASE + 0x70)
+#define MXC_CCM_CCGR3		(MX51_CCM_BASE + 0x74)
+#define MXC_CCM_CCGR4		(MX51_CCM_BASE + 0x78)
+#define MXC_CCM_CCGR5		(MX51_CCM_BASE + 0x7C)
+#define MXC_CCM_CCGR6		(MX51_CCM_BASE + 0x80)
+#define MXC_CCM_CMEOR		(MX51_CCM_BASE + 0x84)
+
+/* Define the bits in register CCR */
+#define MXC_CCM_CCR_COSC_EN		(1 << 12)
+#define MXC_CCM_CCR_FPM_MULT_MASK	(1 << 11)
+#define MXC_CCM_CCR_CAMP2_EN		(1 << 10)
+#define MXC_CCM_CCR_CAMP1_EN		(1 << 9)
+#define MXC_CCM_CCR_FPM_EN		(1 << 8)
+#define MXC_CCM_CCR_OSCNT_OFFSET	(0)
+#define MXC_CCM_CCR_OSCNT_MASK	(0xFF)
+
+/* Define the bits in register CCDR */
+#define MXC_CCM_CCDR_HSC_HS_MASK	(0x1 << 18)
+#define MXC_CCM_CCDR_IPU_HS_MASK	(0x1 << 17)
+#define MXC_CCM_CCDR_EMI_HS_MASK	(0x1 << 16)
+
+/* Define the bits in register CSR */
+#define MXC_CCM_CSR_COSR_READY	(1 << 5)
+#define MXC_CCM_CSR_LVS_VALUE	(1 << 4)
+#define MXC_CCM_CSR_CAMP2_READY	(1 << 3)
+#define MXC_CCM_CSR_CAMP1_READY	(1 << 2)
+#define MXC_CCM_CSR_FPM_READY	(1 << 1)
+#define MXC_CCM_CSR_REF_EN_B	(1 << 0)
+
+/* Define the bits in register CCSR */
+#define MXC_CCM_CCSR_LP_APM_SEL		(0x1 << 9)
+#define MXC_CCM_CCSR_STEP_SEL_OFFSET	(7)
+#define MXC_CCM_CCSR_STEP_SEL_MASK	(0x3 << 7)
+#define MXC_CCM_CCSR_STEP_SEL_LP_APM	   0
+#define MXC_CCM_CCSR_STEP_SEL_PLL1_BYPASS  1 /* Only when JTAG connected? */
+#define MXC_CCM_CCSR_STEP_SEL_PLL2_DIVIDED 2
+#define MXC_CCM_CCSR_STEP_SEL_PLL3_DIVIDED 3
+#define MXC_CCM_CCSR_PLL2_PODF_OFFSET	(5)
+#define MXC_CCM_CCSR_PLL2_PODF_MASK	(0x3 << 5)
+#define MXC_CCM_CCSR_PLL3_PODF_OFFSET	(3)
+#define MXC_CCM_CCSR_PLL3_PODF_MASK	(0x3 << 3)
+#define MXC_CCM_CCSR_PLL1_SW_CLK_SEL	(1 << 2) /* 0: pll1_main_clk,
+						    1: step_clk */
+#define MXC_CCM_CCSR_PLL2_SW_CLK_SEL	(1 << 1)
+#define MXC_CCM_CCSR_PLL3_SW_CLK_SEL	(1 << 0)
+
+/* Define the bits in register CACRR */
+#define MXC_CCM_CACRR_ARM_PODF_OFFSET	(0)
+#define MXC_CCM_CACRR_ARM_PODF_MASK	(0x7)
+
+/* Define the bits in register CBCDR */
+#define MXC_CCM_CBCDR_EMI_CLK_SEL		(0x1 << 26)
+#define MXC_CCM_CBCDR_PERIPH_CLK_SEL		(0x1 << 25)
+#define MXC_CCM_CBCDR_DDR_HF_SEL_OFFSET		(30)
+#define MXC_CCM_CBCDR_DDR_HF_SEL		(0x1 << 30)
+#define MXC_CCM_CBCDR_DDR_PODF_OFFSET		(27)
+#define MXC_CCM_CBCDR_DDR_PODF_MASK		(0x7 << 27)
+#define MXC_CCM_CBCDR_EMI_PODF_OFFSET		(22)
+#define MXC_CCM_CBCDR_EMI_PODF_MASK		(0x7 << 22)
+#define MXC_CCM_CBCDR_AXI_B_PODF_OFFSET		(19)
+#define MXC_CCM_CBCDR_AXI_B_PODF_MASK		(0x7 << 19)
+#define MXC_CCM_CBCDR_AXI_A_PODF_OFFSET		(16)
+#define MXC_CCM_CBCDR_AXI_A_PODF_MASK		(0x7 << 16)
+#define MXC_CCM_CBCDR_NFC_PODF_OFFSET		(13)
+#define MXC_CCM_CBCDR_NFC_PODF_MASK		(0x7 << 13)
+#define MXC_CCM_CBCDR_AHB_PODF_OFFSET		(10)
+#define MXC_CCM_CBCDR_AHB_PODF_MASK		(0x7 << 10)
+#define MXC_CCM_CBCDR_IPG_PODF_OFFSET		(8)
+#define MXC_CCM_CBCDR_IPG_PODF_MASK		(0x3 << 8)
+#define MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET	(6)
+#define MXC_CCM_CBCDR_PERCLK_PRED1_MASK		(0x3 << 6)
+#define MXC_CCM_CBCDR_PERCLK_PRED2_OFFSET	(3)
+#define MXC_CCM_CBCDR_PERCLK_PRED2_MASK		(0x7 << 3)
+#define MXC_CCM_CBCDR_PERCLK_PODF_OFFSET	(0)
+#define MXC_CCM_CBCDR_PERCLK_PODF_MASK		(0x7)
+
+/* Define the bits in register CBCMR */
+#define MXC_CCM_CBCMR_VPU_AXI_CLK_SEL_OFFSET	(14)
+#define MXC_CCM_CBCMR_VPU_AXI_CLK_SEL_MASK	(0x3 << 14)
+#define MXC_CCM_CBCMR_PERIPH_CLK_SEL_OFFSET	(12)
+#define MXC_CCM_CBCMR_PERIPH_CLK_SEL_MASK	(0x3 << 12)
+#define MXC_CCM_CBCMR_DDR_CLK_SEL_OFFSET	(10)
+#define MXC_CCM_CBCMR_DDR_CLK_SEL_MASK		(0x3 << 10)
+#define MXC_CCM_CBCMR_ARM_AXI_CLK_SEL_OFFSET	(8)
+#define MXC_CCM_CBCMR_ARM_AXI_CLK_SEL_MASK	(0x3 << 8)
+#define MXC_CCM_CBCMR_IPU_HSP_CLK_SEL_OFFSET	(6)
+#define MXC_CCM_CBCMR_IPU_HSP_CLK_SEL_MASK	(0x3 << 6)
+#define MXC_CCM_CBCMR_GPU_CLK_SEL_OFFSET	(4)
+#define MXC_CCM_CBCMR_GPU_CLK_SEL_MASK		(0x3 << 4)
+#define MXC_CCM_CBCMR_GPU2D_CLK_SEL_OFFSET	(14)
+#define MXC_CCM_CBCMR_GPU2D_CLK_SEL_MASK	(0x3 << 14)
+#define MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL	(0x1 << 1)
+#define MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL	(0x1 << 0)
+
+/* Define the bits in register CSCMR1 */
+#define MXC_CCM_CSCMR1_SSI_EXT2_CLK_SEL_OFFSET		(30)
+#define MXC_CCM_CSCMR1_SSI_EXT2_CLK_SEL_MASK		(0x3 << 30)
+#define MXC_CCM_CSCMR1_SSI_EXT1_CLK_SEL_OFFSET		(28)
+#define MXC_CCM_CSCMR1_SSI_EXT1_CLK_SEL_MASK		(0x3 << 28)
+#define MXC_CCM_CSCMR1_USB_PHY_CLK_SEL_OFFSET		(26)
+#define MXC_CCM_CSCMR1_USB_PHY_CLK_SEL			(0x1 << 26)
+#define MXC_CCM_CSCMR1_UART_CLK_SEL_OFFSET		(24)
+#define MXC_CCM_CSCMR1_UART_CLK_SEL_MASK		(0x3 << 24)
+#define MXC_CCM_CSCMR1_USBOH3_CLK_SEL_OFFSET		(22)
+#define MXC_CCM_CSCMR1_USBOH3_CLK_SEL_MASK		(0x3 << 22)
+#define MXC_CCM_CSCMR1_ESDHC1_MSHC1_CLK_SEL_OFFSET	(20)
+#define MXC_CCM_CSCMR1_ESDHC1_MSHC1_CLK_SEL_MASK	(0x3 << 20)
+#define MXC_CCM_CSCMR1_ESDHC3_CLK_SEL			(0x1 << 19)
+#define MXC_CCM_CSCMR1_ESDHC4_CLK_SEL			(0x1 << 18)
+#define MXC_CCM_CSCMR1_ESDHC2_MSHC2_CLK_SEL_OFFSET	(16)
+#define MXC_CCM_CSCMR1_ESDHC2_MSHC2_CLK_SEL_MASK	(0x3 << 16)
+#define MXC_CCM_CSCMR1_SSI1_CLK_SEL_OFFSET		(14)
+#define MXC_CCM_CSCMR1_SSI1_CLK_SEL_MASK		(0x3 << 14)
+#define MXC_CCM_CSCMR1_SSI2_CLK_SEL_OFFSET		(12)
+#define MXC_CCM_CSCMR1_SSI2_CLK_SEL_MASK		(0x3 << 12)
+#define MXC_CCM_CSCMR1_SSI3_CLK_SEL			(0x1 << 11)
+#define MXC_CCM_CSCMR1_VPU_RCLK_SEL			(0x1 << 10)
+#define MXC_CCM_CSCMR1_SSI_APM_CLK_SEL_OFFSET		(8)
+#define MXC_CCM_CSCMR1_SSI_APM_CLK_SEL_MASK		(0x3 << 8)
+#define MXC_CCM_CSCMR1_TVE_CLK_SEL			(0x1 << 7)
+#define MXC_CCM_CSCMR1_TVE_EXT_CLK_SEL			(0x1 << 6)
+#define MXC_CCM_CSCMR1_CSPI_CLK_SEL_OFFSET		(4)
+#define MXC_CCM_CSCMR1_CSPI_CLK_SEL_MASK		(0x3 << 4)
+#define MXC_CCM_CSCMR1_SPDIF_CLK_SEL_OFFSET		(2)
+#define MXC_CCM_CSCMR1_SPDIF_CLK_SEL_MASK		(0x3 << 2)
+#define MXC_CCM_CSCMR1_SSI_EXT2_COM_CLK_SEL		(0x1 << 1)
+#define MXC_CCM_CSCMR1_SSI_EXT1_COM_CLK_SEL		(0x1)
+
+/* Define the bits in register CSCMR2 */
+#define MXC_CCM_CSCMR2_DI_CLK_SEL_OFFSET(n)		(26+n*3)
+#define MXC_CCM_CSCMR2_DI_CLK_SEL_MASK(n)		(0x7 << (26+n*3))
+#define MXC_CCM_CSCMR2_CSI_MCLK2_CLK_SEL_OFFSET		(24)
+#define MXC_CCM_CSCMR2_CSI_MCLK2_CLK_SEL_MASK		(0x3 << 24)
+#define MXC_CCM_CSCMR2_CSI_MCLK1_CLK_SEL_OFFSET		(22)
+#define MXC_CCM_CSCMR2_CSI_MCLK1_CLK_SEL_MASK		(0x3 << 22)
+#define MXC_CCM_CSCMR2_ESC_CLK_SEL_OFFSET		(20)
+#define MXC_CCM_CSCMR2_ESC_CLK_SEL_MASK			(0x3 << 20)
+#define MXC_CCM_CSCMR2_HSC2_CLK_SEL_OFFSET		(18)
+#define MXC_CCM_CSCMR2_HSC2_CLK_SEL_MASK		(0x3 << 18)
+#define MXC_CCM_CSCMR2_HSC1_CLK_SEL_OFFSET		(16)
+#define MXC_CCM_CSCMR2_HSC1_CLK_SEL_MASK		(0x3 << 16)
+#define MXC_CCM_CSCMR2_HSI2C_CLK_SEL_OFFSET		(14)
+#define MXC_CCM_CSCMR2_HSI2C_CLK_SEL_MASK		(0x3 << 14)
+#define MXC_CCM_CSCMR2_FIRI_CLK_SEL_OFFSET		(12)
+#define MXC_CCM_CSCMR2_FIRI_CLK_SEL_MASK		(0x3 << 12)
+#define MXC_CCM_CSCMR2_SIM_CLK_SEL_OFFSET		(10)
+#define MXC_CCM_CSCMR2_SIM_CLK_SEL_MASK			(0x3 << 10)
+#define MXC_CCM_CSCMR2_SLIMBUS_COM			(0x1 << 9)
+#define MXC_CCM_CSCMR2_SLIMBUS_CLK_SEL_OFFSET		(6)
+#define MXC_CCM_CSCMR2_SLIMBUS_CLK_SEL_MASK		(0x7 << 6)
+#define MXC_CCM_CSCMR2_SPDIF1_COM			(1 << 5)
+#define MXC_CCM_CSCMR2_SPDIF0_COM			(1 << 4)
+#define MXC_CCM_CSCMR2_SPDIF1_CLK_SEL_OFFSET		(2)
+#define MXC_CCM_CSCMR2_SPDIF1_CLK_SEL_MASK		(0x3 << 2)
+#define MXC_CCM_CSCMR2_SPDIF0_CLK_SEL_OFFSET		(0)
+#define MXC_CCM_CSCMR2_SPDIF0_CLK_SEL_MASK		(0x3)
+
+/* Define the bits in register CSCDR1 */
+#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PRED_OFFSET	(22)
+#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PRED_MASK	(0x7 << 22)
+#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PODF_OFFSET	(19)
+#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PODF_MASK	(0x7 << 19)
+#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PRED_OFFSET	(16)
+#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PRED_MASK	(0x7 << 16)
+#define MXC_CCM_CSCDR1_PGC_CLK_PODF_OFFSET		(14)
+#define MXC_CCM_CSCDR1_PGC_CLK_PODF_MASK		(0x3 << 14)
+#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PODF_OFFSET	(11)
+#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PODF_MASK	(0x7 << 11)
+#define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_OFFSET		(8)
+#define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_MASK		(0x7 << 8)
+#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_OFFSET		(6)
+#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_MASK		(0x3 << 6)
+#define MXC_CCM_CSCDR1_UART_CLK_PRED_OFFSET		(3)
+#define MXC_CCM_CSCDR1_UART_CLK_PRED_MASK		(0x7 << 3)
+#define MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET		(0)
+#define MXC_CCM_CSCDR1_UART_CLK_PODF_MASK		(0x7)
+
+/* Define the bits in register CS1CDR and CS2CDR */
+#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PRED_OFFSET		(22)
+#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PRED_MASK		(0x7 << 22)
+#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PODF_OFFSET		(16)
+#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PODF_MASK		(0x3F << 16)
+#define MXC_CCM_CS1CDR_SSI1_CLK_PRED_OFFSET		(6)
+#define MXC_CCM_CS1CDR_SSI1_CLK_PRED_MASK		(0x7 << 6)
+#define MXC_CCM_CS1CDR_SSI1_CLK_PODF_OFFSET		(0)
+#define MXC_CCM_CS1CDR_SSI1_CLK_PODF_MASK		(0x3F)
+
+#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PRED_OFFSET		(22)
+#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PRED_MASK		(0x7 << 22)
+#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PODF_OFFSET		(16)
+#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PODF_MASK		(0x3F << 16)
+#define MXC_CCM_CS2CDR_SSI2_CLK_PRED_OFFSET		(6)
+#define MXC_CCM_CS2CDR_SSI2_CLK_PRED_MASK		(0x7 << 6)
+#define MXC_CCM_CS2CDR_SSI2_CLK_PODF_OFFSET		(0)
+#define MXC_CCM_CS2CDR_SSI2_CLK_PODF_MASK		(0x3F)
+
+/* Define the bits in register CDCDR */
+#define MXC_CCM_CDCDR_TVE_CLK_PRED_OFFSET		(28)
+#define MXC_CCM_CDCDR_TVE_CLK_PRED_MASK			(0x7 << 28)
+#define MXC_CCM_CDCDR_SPDIF0_CLK_PRED_OFFSET		(25)
+#define MXC_CCM_CDCDR_SPDIF0_CLK_PRED_MASK		(0x7 << 25)
+#define MXC_CCM_CDCDR_SPDIF0_CLK_PODF_OFFSET		(19)
+#define MXC_CCM_CDCDR_SPDIF0_CLK_PODF_MASK		(0x3F << 19)
+#define MXC_CCM_CDCDR_SPDIF1_CLK_PRED_OFFSET		(16)
+#define MXC_CCM_CDCDR_SPDIF1_CLK_PRED_MASK		(0x7 << 16)
+#define MXC_CCM_CDCDR_SPDIF1_CLK_PODF_OFFSET		(9)
+#define MXC_CCM_CDCDR_SPDIF1_CLK_PODF_MASK		(0x3F << 9)
+#define MXC_CCM_CDCDR_DI_CLK_PRED_OFFSET		(6)
+#define MXC_CCM_CDCDR_DI_CLK_PRED_MASK			(0x7 << 6)
+#define MXC_CCM_CDCDR_USB_PHY_PRED_OFFSET		(3)
+#define MXC_CCM_CDCDR_USB_PHY_PRED_MASK			(0x7 << 3)
+#define MXC_CCM_CDCDR_USB_PHY_PODF_OFFSET		(0)
+#define MXC_CCM_CDCDR_USB_PHY_PODF_MASK			(0x7)
+
+/* Define the bits in register CHSCCDR */
+#define MXC_CCM_CHSCCDR_ESC_CLK_PRED_OFFSET		(12)
+#define MXC_CCM_CHSCCDR_ESC_CLK_PRED_MASK		(0x7 << 12)
+#define MXC_CCM_CHSCCDR_ESC_CLK_PODF_OFFSET		(6)
+#define MXC_CCM_CHSCCDR_ESC_CLK_PODF_MASK		(0x3F << 6)
+#define MXC_CCM_CHSCCDR_HSC2_CLK_PODF_OFFSET		(3)
+#define MXC_CCM_CHSCCDR_HSC2_CLK_PODF_MASK		(0x7 << 3)
+#define MXC_CCM_CHSCCDR_HSC1_CLK_PODF_OFFSET		(0)
+#define MXC_CCM_CHSCCDR_HSC1_CLK_PODF_MASK		(0x7)
+
+/* Define the bits in register CSCDR2 */
+#define MXC_CCM_CSCDR2_CSPI_CLK_PRED_OFFSET		(25)
+#define MXC_CCM_CSCDR2_CSPI_CLK_PRED_MASK		(0x7 << 25)
+#define MXC_CCM_CSCDR2_CSPI_CLK_PODF_OFFSET		(19)
+#define MXC_CCM_CSCDR2_CSPI_CLK_PODF_MASK		(0x3F << 19)
+#define MXC_CCM_CSCDR2_SIM_CLK_PRED_OFFSET		(16)
+#define MXC_CCM_CSCDR2_SIM_CLK_PRED_MASK		(0x7 << 16)
+#define MXC_CCM_CSCDR2_SIM_CLK_PODF_OFFSET		(9)
+#define MXC_CCM_CSCDR2_SIM_CLK_PODF_MASK		(0x3F << 9)
+#define MXC_CCM_CSCDR2_SLIMBUS_CLK_PRED_OFFSET		(6)
+#define MXC_CCM_CSCDR2_SLIMBUS_PRED_MASK		(0x7 << 6)
+#define MXC_CCM_CSCDR2_SLIMBUS_PODF_OFFSET		(0)
+#define MXC_CCM_CSCDR2_SLIMBUS_PODF_MASK		(0x3F)
+
+/* Define the bits in register CSCDR3 */
+#define MXC_CCM_CSCDR3_HSI2C_CLK_PRED_OFFSET		(16)
+#define MXC_CCM_CSCDR3_HSI2C_CLK_PRED_MASK		(0x7 << 16)
+#define MXC_CCM_CSCDR3_HSI2C_CLK_PODF_OFFSET		(9)
+#define MXC_CCM_CSCDR3_HSI2C_CLK_PODF_MASK		(0x3F << 9)
+#define MXC_CCM_CSCDR3_FIRI_CLK_PRED_OFFSET		(6)
+#define MXC_CCM_CSCDR3_FIRI_CLK_PRED_MASK		(0x7 << 6)
+#define MXC_CCM_CSCDR3_FIRI_CLK_PODF_OFFSET		(0)
+#define MXC_CCM_CSCDR3_FIRI_CLK_PODF_MASK		(0x3F)
+
+/* Define the bits in register CSCDR4 */
+#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PRED_OFFSET	(16)
+#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PRED_MASK		(0x7 << 16)
+#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PODF_OFFSET	(9)
+#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PODF_MASK		(0x3F << 9)
+#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PRED_OFFSET	(6)
+#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PRED_MASK		(0x7 << 6)
+#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PODF_OFFSET	(0)
+#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PODF_MASK		(0x3F)
+
+/* Define the bits in register CDHIPR */
+#define MXC_CCM_CDHIPR_ARM_PODF_BUSY			(1 << 16)
+#define MXC_CCM_CDHIPR_DDR_HF_CLK_SEL_BUSY		(1 << 8)
+#define MXC_CCM_CDHIPR_DDR_PODF_BUSY			(1 << 7)
+#define MXC_CCM_CDHIPR_EMI_CLK_SEL_BUSY			(1 << 6)
+#define MXC_CCM_CDHIPR_PERIPH_CLK_SEL_BUSY		(1 << 5)
+#define MXC_CCM_CDHIPR_NFC_IPG_INT_MEM_PODF_BUSY	(1 << 4)
+#define MXC_CCM_CDHIPR_AHB_PODF_BUSY			(1 << 3)
+#define MXC_CCM_CDHIPR_EMI_PODF_BUSY			(1 << 2)
+#define MXC_CCM_CDHIPR_AXI_B_PODF_BUSY			(1 << 1)
+#define MXC_CCM_CDHIPR_AXI_A_PODF_BUSY			(1 << 0)
+
+/* Define the bits in register CDCR */
+#define MXC_CCM_CDCR_ARM_FREQ_SHIFT_DIVIDER		(0x1 << 2)
+#define MXC_CCM_CDCR_PERIPH_CLK_DVFS_PODF_OFFSET	(0)
+#define MXC_CCM_CDCR_PERIPH_CLK_DVFS_PODF_MASK		(0x3)
+
+/* Define the bits in register CLPCR */
+#define MXC_CCM_CLPCR_BYPASS_HSC_LPM_HS		(0x1 << 23)
+#define MXC_CCM_CLPCR_BYPASS_SCC_LPM_HS		(0x1 << 22)
+#define MXC_CCM_CLPCR_BYPASS_MAX_LPM_HS		(0x1 << 21)
+#define MXC_CCM_CLPCR_BYPASS_SDMA_LPM_HS	(0x1 << 20)
+#define MXC_CCM_CLPCR_BYPASS_EMI_LPM_HS		(0x1 << 19)
+#define MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS		(0x1 << 18)
+#define MXC_CCM_CLPCR_BYPASS_RTIC_LPM_HS	(0x1 << 17)
+#define MXC_CCM_CLPCR_BYPASS_RNGC_LPM_HS	(0x1 << 16)
+#define MXC_CCM_CLPCR_COSC_PWRDOWN		(0x1 << 11)
+#define MXC_CCM_CLPCR_STBY_COUNT_OFFSET		(9)
+#define MXC_CCM_CLPCR_STBY_COUNT_MASK		(0x3 << 9)
+#define MXC_CCM_CLPCR_VSTBY			(0x1 << 8)
+#define MXC_CCM_CLPCR_DIS_REF_OSC		(0x1 << 7)
+#define MXC_CCM_CLPCR_SBYOS			(0x1 << 6)
+#define MXC_CCM_CLPCR_ARM_CLK_DIS_ON_LPM	(0x1 << 5)
+#define MXC_CCM_CLPCR_LPSR_CLK_SEL_OFFSET	(3)
+#define MXC_CCM_CLPCR_LPSR_CLK_SEL_MASK		(0x3 << 3)
+#define MXC_CCM_CLPCR_LPM_OFFSET		(0)
+#define MXC_CCM_CLPCR_LPM_MASK			(0x3)
+
+/* Define the bits in register CISR */
+#define MXC_CCM_CISR_ARM_PODF_LOADED			(0x1 << 25)
+#define MXC_CCM_CISR_NFC_IPG_INT_MEM_PODF_LOADED	(0x1 << 21)
+#define MXC_CCM_CISR_AHB_PODF_LOADED			(0x1 << 20)
+#define MXC_CCM_CISR_EMI_PODF_LOADED			(0x1 << 19)
+#define MXC_CCM_CISR_AXI_B_PODF_LOADED			(0x1 << 18)
+#define MXC_CCM_CISR_AXI_A_PODF_LOADED			(0x1 << 17)
+#define MXC_CCM_CISR_DIVIDER_LOADED			(0x1 << 16)
+#define MXC_CCM_CISR_COSC_READY				(0x1 << 6)
+#define MXC_CCM_CISR_CKIH2_READY			(0x1 << 5)
+#define MXC_CCM_CISR_CKIH_READY				(0x1 << 4)
+#define MXC_CCM_CISR_FPM_READY				(0x1 << 3)
+#define MXC_CCM_CISR_LRF_PLL3				(0x1 << 2)
+#define MXC_CCM_CISR_LRF_PLL2				(0x1 << 1)
+#define MXC_CCM_CISR_LRF_PLL1				(0x1)
+
+/* Define the bits in register CIMR */
+#define MXC_CCM_CIMR_MASK_ARM_PODF_LOADED		(0x1 << 25)
+#define MXC_CCM_CIMR_MASK_NFC_IPG_INT_MEM_PODF_LOADED	(0x1 << 21)
+#define MXC_CCM_CIMR_MASK_EMI_PODF_LOADED		(0x1 << 20)
+#define MXC_CCM_CIMR_MASK_AXI_C_PODF_LOADED		(0x1 << 19)
+#define MXC_CCM_CIMR_MASK_AXI_B_PODF_LOADED		(0x1 << 18)
+#define MXC_CCM_CIMR_MASK_AXI_A_PODF_LOADED		(0x1 << 17)
+#define MXC_CCM_CIMR_MASK_DIVIDER_LOADED		(0x1 << 16)
+#define MXC_CCM_CIMR_MASK_COSC_READY			(0x1 << 5)
+#define MXC_CCM_CIMR_MASK_CKIH_READY			(0x1 << 4)
+#define MXC_CCM_CIMR_MASK_FPM_READY			(0x1 << 3)
+#define MXC_CCM_CIMR_MASK_LRF_PLL3			(0x1 << 2)
+#define MXC_CCM_CIMR_MASK_LRF_PLL2			(0x1 << 1)
+#define MXC_CCM_CIMR_MASK_LRF_PLL1			(0x1)
+
+/* Define the bits in register CCOSR */
+#define MXC_CCM_CCOSR_CKO2_EN_OFFSET			(0x1 << 24)
+#define MXC_CCM_CCOSR_CKO2_DIV_OFFSET			(21)
+#define MXC_CCM_CCOSR_CKO2_DIV_MASK			(0x7 << 21)
+#define MXC_CCM_CCOSR_CKO2_SEL_OFFSET			(16)
+#define MXC_CCM_CCOSR_CKO2_SEL_MASK			(0x1F << 16)
+#define MXC_CCM_CCOSR_CKOL_EN				(0x1 << 7)
+#define MXC_CCM_CCOSR_CKOL_DIV_OFFSET			(4)
+#define MXC_CCM_CCOSR_CKOL_DIV_MASK			(0x7 << 4)
+#define MXC_CCM_CCOSR_CKOL_SEL_OFFSET			(0)
+#define MXC_CCM_CCOSR_CKOL_SEL_MASK			(0xF)
+
+/* Define the bits in registers CGPR */
+#define MXC_CCM_CGPR_EFUSE_PROG_SUPPLY_GATE		(0x1 << 4)
+#define MXC_CCM_CGPR_FPM_SEL				(0x1 << 3)
+#define MXC_CCM_CGPR_VL_L2BIST_CLKDIV_OFFSET		(0)
+#define MXC_CCM_CGPR_VL_L2BIST_CLKDIV_MASK		(0x7)
+
+/* Define the bits in registers CCGRx */
+#define MXC_CCM_CCGRx_CG_MASK				0x3
+#define MXC_CCM_CCGRx_MOD_OFF				0x0
+#define MXC_CCM_CCGRx_MOD_ON				0x3
+#define MXC_CCM_CCGRx_MOD_IDLE				0x1
+
+#define MXC_CCM_CCGRx_CG15_MASK				(0x3 << 30)
+#define MXC_CCM_CCGRx_CG14_MASK				(0x3 << 28)
+#define MXC_CCM_CCGRx_CG13_MASK				(0x3 << 26)
+#define MXC_CCM_CCGRx_CG12_MASK				(0x3 << 24)
+#define MXC_CCM_CCGRx_CG11_MASK				(0x3 << 22)
+#define MXC_CCM_CCGRx_CG10_MASK				(0x3 << 20)
+#define MXC_CCM_CCGRx_CG9_MASK				(0x3 << 18)
+#define MXC_CCM_CCGRx_CG8_MASK				(0x3 << 16)
+#define MXC_CCM_CCGRx_CG5_MASK				(0x3 << 10)
+#define MXC_CCM_CCGRx_CG4_MASK				(0x3 << 8)
+#define MXC_CCM_CCGRx_CG3_MASK				(0x3 << 6)
+#define MXC_CCM_CCGRx_CG2_MASK				(0x3 << 4)
+#define MXC_CCM_CCGRx_CG1_MASK				(0x3 << 2)
+#define MXC_CCM_CCGRx_CG0_MASK				(0x3 << 0)
+
+#define MXC_CCM_CCGRx_CG15_OFFSET			30
+#define MXC_CCM_CCGRx_CG14_OFFSET			28
+#define MXC_CCM_CCGRx_CG13_OFFSET			26
+#define MXC_CCM_CCGRx_CG12_OFFSET			24
+#define MXC_CCM_CCGRx_CG11_OFFSET			22
+#define MXC_CCM_CCGRx_CG10_OFFSET			20
+#define MXC_CCM_CCGRx_CG9_OFFSET			18
+#define MXC_CCM_CCGRx_CG8_OFFSET			16
+#define MXC_CCM_CCGRx_CG7_OFFSET			14
+#define MXC_CCM_CCGRx_CG6_OFFSET			12
+#define MXC_CCM_CCGRx_CG5_OFFSET			10
+#define MXC_CCM_CCGRx_CG4_OFFSET			8
+#define MXC_CCM_CCGRx_CG3_OFFSET			6
+#define MXC_CCM_CCGRx_CG2_OFFSET			4
+#define MXC_CCM_CCGRx_CG1_OFFSET			2
+#define MXC_CCM_CCGRx_CG0_OFFSET			0
+
+#define MXC_DPTC_LP_BASE	(MX51_GPC_BASE + 0x80)
+#define MXC_DPTC_GP_BASE	(MX51_GPC_BASE + 0x100)
+#define MXC_DVFS_CORE_BASE	(MX51_GPC_BASE + 0x180)
+#define MXC_DPTC_PER_BASE	(MX51_GPC_BASE + 0x1C0)
+#define MXC_PGC_IPU_BASE	(MX51_GPC_BASE + 0x220)
+#define MXC_PGC_VPU_BASE	(MX51_GPC_BASE + 0x240)
+#define MXC_PGC_GPU_BASE	(MX51_GPC_BASE + 0x260)
+#define MXC_SRPG_NEON_BASE	(MX51_GPC_BASE + 0x280)
+#define MXC_SRPG_ARM_BASE	(MX51_GPC_BASE + 0x2A0)
+#define MXC_SRPG_EMPGC0_BASE	(MX51_GPC_BASE + 0x2C0)
+#define MXC_SRPG_EMPGC1_BASE	(MX51_GPC_BASE + 0x2D0)
+#define MXC_SRPG_MEGAMIX_BASE	(MX51_GPC_BASE + 0x2E0)
+#define MXC_SRPG_EMI_BASE	(MX51_GPC_BASE + 0x300)
+
+/* CORTEXA8 platform */
+#define MXC_CORTEXA8_PLAT_PVID		(MX51_CORTEXA8_BASE + 0x0)
+#define MXC_CORTEXA8_PLAT_GPC		(MX51_CORTEXA8_BASE + 0x4)
+#define MXC_CORTEXA8_PLAT_PIC		(MX51_CORTEXA8_BASE + 0x8)
+#define MXC_CORTEXA8_PLAT_LPC		(MX51_CORTEXA8_BASE + 0xC)
+#define MXC_CORTEXA8_PLAT_NEON_LPC	(MX51_CORTEXA8_BASE + 0x10)
+#define MXC_CORTEXA8_PLAT_ICGC		(MX51_CORTEXA8_BASE + 0x14)
+#define MXC_CORTEXA8_PLAT_AMC		(MX51_CORTEXA8_BASE + 0x18)
+#define MXC_CORTEXA8_PLAT_NMC		(MX51_CORTEXA8_BASE + 0x20)
+#define MXC_CORTEXA8_PLAT_NMS		(MX51_CORTEXA8_BASE + 0x24)
+
+/* DVFS CORE */
+#define MXC_DVFSTHRS		(MXC_DVFS_CORE_BASE + 0x00)
+#define MXC_DVFSCOUN		(MXC_DVFS_CORE_BASE + 0x04)
+#define MXC_DVFSSIG1		(MXC_DVFS_CORE_BASE + 0x08)
+#define MXC_DVFSSIG0		(MXC_DVFS_CORE_BASE + 0x0C)
+#define MXC_DVFSGPC0		(MXC_DVFS_CORE_BASE + 0x10)
+#define MXC_DVFSGPC1		(MXC_DVFS_CORE_BASE + 0x14)
+#define MXC_DVFSGPBT		(MXC_DVFS_CORE_BASE + 0x18)
+#define MXC_DVFSEMAC		(MXC_DVFS_CORE_BASE + 0x1C)
+#define MXC_DVFSCNTR		(MXC_DVFS_CORE_BASE + 0x20)
+#define MXC_DVFSLTR0_0		(MXC_DVFS_CORE_BASE + 0x24)
+#define MXC_DVFSLTR0_1		(MXC_DVFS_CORE_BASE + 0x28)
+#define MXC_DVFSLTR1_0		(MXC_DVFS_CORE_BASE + 0x2C)
+#define MXC_DVFSLTR1_1		(MXC_DVFS_CORE_BASE + 0x30)
+#define MXC_DVFSPT0 		(MXC_DVFS_CORE_BASE + 0x34)
+#define MXC_DVFSPT1 		(MXC_DVFS_CORE_BASE + 0x38)
+#define MXC_DVFSPT2 		(MXC_DVFS_CORE_BASE + 0x3C)
+#define MXC_DVFSPT3 		(MXC_DVFS_CORE_BASE + 0x40)
+
+/* GPC */
+#define MXC_GPC_CNTR		(MX51_GPC_BASE + 0x0)
+#define MXC_GPC_PGR		(MX51_GPC_BASE + 0x4)
+#define MXC_GPC_VCR		(MX51_GPC_BASE + 0x8)
+#define MXC_GPC_ALL_PU		(MX51_GPC_BASE + 0xC)
+#define MXC_GPC_NEON		(MX51_GPC_BASE + 0x10)
+#define MXC_GPC_PGR_ARMPG_OFFSET	8
+#define MXC_GPC_PGR_ARMPG_MASK		(3 << 8)
+
+/* PGC */
+#define MXC_PGC_IPU_PGCR	(MXC_PGC_IPU_BASE + 0x0)
+#define MXC_PGC_IPU_PGSR	(MXC_PGC_IPU_BASE + 0xC)
+#define MXC_PGC_VPU_PGCR	(MXC_PGC_VPU_BASE + 0x0)
+#define MXC_PGC_VPU_PGSR	(MXC_PGC_VPU_BASE + 0xC)
+#define MXC_PGC_GPU_PGCR	(MXC_PGC_GPU_BASE + 0x0)
+#define MXC_PGC_GPU_PGSR	(MXC_PGC_GPU_BASE + 0xC)
+
+#define MXC_PGCR_PCR		1
+#define MXC_SRPGCR_PCR		1
+#define MXC_EMPGCR_PCR		1
+#define MXC_PGSR_PSR		1
+
+
+#define MXC_CORTEXA8_PLAT_LPC_DSM	(1 << 0)
+#define MXC_CORTEXA8_PLAT_LPC_DBG_DSM	(1 << 1)
+
+/* SRPG */
+#define MXC_SRPG_NEON_SRPGCR	(MXC_SRPG_NEON_BASE + 0x0)
+#define MXC_SRPG_NEON_PUPSCR	(MXC_SRPG_NEON_BASE + 0x4)
+#define MXC_SRPG_NEON_PDNSCR	(MXC_SRPG_NEON_BASE + 0x8)
+
+#define MXC_SRPG_ARM_SRPGCR	(MXC_SRPG_ARM_BASE + 0x0)
+#define MXC_SRPG_ARM_PUPSCR	(MXC_SRPG_ARM_BASE + 0x4)
+#define MXC_SRPG_ARM_PDNSCR	(MXC_SRPG_ARM_BASE + 0x8)
+
+#define MXC_SRPG_EMPGC0_SRPGCR	(MXC_SRPG_EMPGC0_BASE + 0x0)
+#define MXC_SRPG_EMPGC0_PUPSCR	(MXC_SRPG_EMPGC0_BASE + 0x4)
+#define MXC_SRPG_EMPGC0_PDNSCR	(MXC_SRPG_EMPGC0_BASE + 0x8)
+
+#define MXC_SRPG_EMPGC1_SRPGCR	(MXC_SRPG_EMPGC1_BASE + 0x0)
+#define MXC_SRPG_EMPGC1_PUPSCR	(MXC_SRPG_EMPGC1_BASE + 0x4)
+#define MXC_SRPG_EMPGC1_PDNSCR	(MXC_SRPG_EMPGC1_BASE + 0x8)
+
+#define MXC_SRPG_MEGAMIX_SRPGCR		(MXC_SRPG_MEGAMIX_BASE + 0x0)
+#define MXC_SRPG_MEGAMIX_PUPSCR		(MXC_SRPG_MEGAMIX_BASE + 0x4)
+#define MXC_SRPG_MEGAMIX_PDNSCR		(MXC_SRPG_MEGAMIX_BASE + 0x8)
+
+#define MXC_SRPGC_EMI_SRPGCR	(MXC_SRPGC_EMI_BASE + 0x0)
+#define MXC_SRPGC_EMI_PUPSCR	(MXC_SRPGC_EMI_BASE + 0x4)
+#define MXC_SRPGC_EMI_PDNSCR	(MXC_SRPGC_EMI_BASE + 0x8)
+
+#endif				/* __ARCH_ARM_MACH_MX51_CRM_REGS_H__ */
diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c
new file mode 100644
index 000000000000..d6fd3961ade9
--- /dev/null
+++ b/arch/arm/mach-mx5/devices.c
@@ -0,0 +1,96 @@
+/*
+ * Copyright 2009 Amit Kucheria <amit.kucheria@canonical.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/platform_device.h>
+#include <mach/hardware.h>
+#include <mach/imx-uart.h>
+
+static struct resource uart0[] = {
+	{
+		.start = MX51_UART1_BASE_ADDR,
+		.end = MX51_UART1_BASE_ADDR + 0xfff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MX51_MXC_INT_UART1,
+		.end = MX51_MXC_INT_UART1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_uart_device0 = {
+	.name = "imx-uart",
+	.id = 0,
+	.resource = uart0,
+	.num_resources = ARRAY_SIZE(uart0),
+};
+
+static struct resource uart1[] = {
+	{
+		.start = MX51_UART2_BASE_ADDR,
+		.end = MX51_UART2_BASE_ADDR + 0xfff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MX51_MXC_INT_UART2,
+		.end = MX51_MXC_INT_UART2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_uart_device1 = {
+	.name = "imx-uart",
+	.id = 1,
+	.resource = uart1,
+	.num_resources = ARRAY_SIZE(uart1),
+};
+
+static struct resource uart2[] = {
+	{
+		.start = MX51_UART3_BASE_ADDR,
+		.end = MX51_UART3_BASE_ADDR + 0xfff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MX51_MXC_INT_UART3,
+		.end = MX51_MXC_INT_UART3,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_uart_device2 = {
+	.name = "imx-uart",
+	.id = 2,
+	.resource = uart2,
+	.num_resources = ARRAY_SIZE(uart2),
+};
+
+static struct resource mxc_fec_resources[] = {
+	{
+		.start	= MX51_MXC_FEC_BASE_ADDR,
+		.end	= MX51_MXC_FEC_BASE_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= MX51_MXC_INT_FEC,
+		.end	= MX51_MXC_INT_FEC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_fec_device = {
+	.name = "fec",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_fec_resources),
+	.resource = mxc_fec_resources,
+};
+
+/* Dummy definition to allow compiling in AVIC and TZIC simultaneously */
+int __init mxc_register_gpios(void)
+{
+	return 0;
+}
diff --git a/arch/arm/mach-mx5/devices.h b/arch/arm/mach-mx5/devices.h
new file mode 100644
index 000000000000..f339ab8c19be
--- /dev/null
+++ b/arch/arm/mach-mx5/devices.h
@@ -0,0 +1,4 @@
+extern struct platform_device mxc_uart_device0;
+extern struct platform_device mxc_uart_device1;
+extern struct platform_device mxc_uart_device2;
+extern struct platform_device mxc_fec_device;
diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c
new file mode 100644
index 000000000000..c21e18be7af8
--- /dev/null
+++ b/arch/arm/mach-mx5/mm.c
@@ -0,0 +1,89 @@
+/*
+ * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License.  You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ *
+ * Create static mapping between physical to virtual memory.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/iomux-v3.h>
+
+/*
+ * Define the MX51 memory map.
+ */
+static struct map_desc mxc_io_desc[] __initdata = {
+	{
+		.virtual = MX51_IRAM_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX51_IRAM_BASE_ADDR),
+		.length = MX51_IRAM_SIZE,
+		.type = MT_DEVICE
+	}, {
+		.virtual = MX51_DEBUG_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX51_DEBUG_BASE_ADDR),
+		.length = MX51_DEBUG_SIZE,
+		.type = MT_DEVICE
+	}, {
+		.virtual = MX51_TZIC_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX51_TZIC_BASE_ADDR),
+		.length = MX51_TZIC_SIZE,
+		.type = MT_DEVICE
+	}, {
+		.virtual = MX51_AIPS1_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX51_AIPS1_BASE_ADDR),
+		.length = MX51_AIPS1_SIZE,
+		.type = MT_DEVICE
+	}, {
+		.virtual = MX51_SPBA0_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX51_SPBA0_BASE_ADDR),
+		.length = MX51_SPBA0_SIZE,
+		.type = MT_DEVICE
+	}, {
+		.virtual = MX51_AIPS2_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX51_AIPS2_BASE_ADDR),
+		.length = MX51_AIPS2_SIZE,
+		.type = MT_DEVICE
+	}, {
+		.virtual = MX51_NFC_AXI_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX51_NFC_AXI_BASE_ADDR),
+		.length = MX51_NFC_AXI_SIZE,
+		.type = MT_DEVICE
+	},
+};
+
+/*
+ * This function initializes the memory map. It is called during the
+ * system startup to create static physical to virtual memory mappings
+ * for the IO modules.
+ */
+void __init mx51_map_io(void)
+{
+	u32 tzic_addr;
+
+	if (mx51_revision() < MX51_CHIP_REV_2_0)
+		tzic_addr = 0x8FFFC000;
+	else
+		tzic_addr = 0xE0003000;
+	mxc_io_desc[2].pfn =  __phys_to_pfn(tzic_addr);
+
+	mxc_set_cpu_type(MXC_CPU_MX51);
+	mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
+	mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG_BASE_ADDR));
+	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+}
+
+void __init mx51_init_irq(void)
+{
+	tzic_init_irq(MX51_IO_ADDRESS(MX51_TZIC_BASE_ADDR));
+}
diff --git a/arch/arm/mach-mxc91231/magx-zn5.c b/arch/arm/mach-mxc91231/magx-zn5.c
index 7dbe4ca12efd..69816ba82930 100644
--- a/arch/arm/mach-mxc91231/magx-zn5.c
+++ b/arch/arm/mach-mxc91231/magx-zn5.c
@@ -55,7 +55,7 @@ struct sys_timer zn5_timer = {
 MACHINE_START(MAGX_ZN5, "Motorola Zn5")
 	.phys_io	= MXC91231_AIPS1_BASE_ADDR,
 	.io_pg_offst	= ((MXC91231_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params	= PHYS_OFFSET + 0x100,
+	.boot_params	= MXC91231_PHYS_OFFSET + 0x100,
 	.map_io		= mxc91231_map_io,
 	.init_irq	= mxc91231_init_irq,
 	.timer		= &zn5_timer,
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 9438bf6613a3..ab3712c86d2b 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -38,7 +38,7 @@
 #define SRC_CR_INIT_MASK	0x00007fff
 #define SRC_CR_INIT_VAL		0x2aaa8000
 
-/* These adresses span 16MB, so use three individual pages */
+/* These addresses span 16MB, so use three individual pages */
 static struct resource nhk8815_nand_resources[] = {
 	{
 		.name = "nand_addr",
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 2069fb33baaa..4b9fc57770db 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -22,6 +22,9 @@ obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
 # SMP support ONLY available for OMAP4
 obj-$(CONFIG_SMP)			+= omap-smp.o omap-headsmp.o
 obj-$(CONFIG_LOCAL_TIMERS)		+= timer-mpu.o
+obj-$(CONFIG_ARCH_OMAP4)		+= omap44xx-smc.o
+
+AFLAGS_omap44xx-smc.o			:=-Wa,-march=armv7-a
 
 # Functions loaded to SRAM
 obj-$(CONFIG_ARCH_OMAP2420)		+= sram242x.o
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index a101029ceb6f..5822bcf7b15f 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -648,7 +648,7 @@ static void enable_board_wakeup_source(void)
 		OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
 }
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 
 	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
 	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index 4386d2b4a785..a0a2a113465c 100755..100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -54,7 +54,7 @@ static void enable_board_wakeup_source(void)
 		OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
 }
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 
 	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
 	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 180ac112e527..b88f28c5814b 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -50,33 +50,9 @@ static struct omap_board_config_kernel sdp4430_config[] __initdata = {
 };
 
 #ifdef CONFIG_CACHE_L2X0
-noinline void omap_smc1(u32 fn, u32 arg)
-{
-	register u32 r12 asm("r12") = fn;
-	register u32 r0 asm("r0") = arg;
-
-	/* This is common routine cache secure monitor API used to
-	 * modify the PL310 secure registers.
-	 * r0 contains the value to be modified and "r12" contains
-	 * the monitor API number. It uses few CPU registers
-	 * internally and hence they need be backed up including
-	 * link register "lr".
-	 * Explicitly save r11 and r12 the compiler generated code
-	 * won't save it.
-	 */
-	asm volatile(
-		"stmfd r13!, {r11,r12}\n"
-		"dsb\n"
-		"smc\n"
-		"ldmfd r13!, {r11,r12}\n"
-		: "+r" (r0), "+r" (r12)
-		:
-		: "r4", "r5", "r10", "lr", "cc");
-}
-EXPORT_SYMBOL(omap_smc1);
-
 static int __init omap_l2_cache_init(void)
 {
+	extern void omap_smc1(u32 fn, u32 arg);
 	void __iomem *l2cache_base;
 
 	/* To avoid code running on other OMAPs in
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index 70c18614773c..6ae880585d54 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -273,7 +273,7 @@ static void __init am3517_evm_init_irq(void)
 	omap_gpio_init();
 }
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = {
+static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
 	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
 	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index afa77caaff4d..2de4f79f03a0 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -612,7 +612,7 @@ static struct omap2_hsmmc_info mmc[] = {
 	{}	/* Terminator */
 };
 
-static struct ehci_hcd_omap_platform_data ehci_pdata = {
+static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = {
 	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
 	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
 	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 371019054b49..5bfc13b3176c 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -636,7 +636,7 @@ static struct omap_musb_board_data musb_board_data = {
 	.power			= 100,
 };
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 
 	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
 	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 9958987a3d0a..3c7789d45051 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -16,7 +16,6 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
-#include <linux/leds.h>
 #include <linux/interrupt.h>
 
 #include <linux/regulator/machine.h>
@@ -39,8 +38,8 @@
 #define IGEP2_SMSC911X_CS       5
 #define IGEP2_SMSC911X_GPIO     176
 #define IGEP2_GPIO_USBH_NRESET  24
-#define IGEP2_GPIO_LED0_RED 	26
-#define IGEP2_GPIO_LED0_GREEN 	27
+#define IGEP2_GPIO_LED0_GREEN 	26
+#define IGEP2_GPIO_LED0_RED 	27
 #define IGEP2_GPIO_LED1_RED   	28
 #define IGEP2_GPIO_DVI_PUP	170
 #define IGEP2_GPIO_WIFI_NPD 	94
@@ -355,34 +354,50 @@ static void __init igep2_display_init(void)
 	    gpio_direction_output(IGEP2_GPIO_DVI_PUP, 1))
 		pr_err("IGEP v2: Could not obtain gpio GPIO_DVI_PUP\n");
 }
-#ifdef CONFIG_LEDS_TRIGGERS
-static struct gpio_led gpio_leds[] = {
+
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+#include <linux/leds.h>
+
+static struct gpio_led igep2_gpio_leds[] = {
 	{
-		.name = "GPIO_LED1_RED",
+		.name = "led0:red",
+		.gpio = IGEP2_GPIO_LED0_RED,
+	},
+	{
+		.name = "led0:green",
 		.default_trigger = "heartbeat",
+		.gpio = IGEP2_GPIO_LED0_GREEN,
+	},
+	{
+		.name = "led1:red",
 		.gpio = IGEP2_GPIO_LED1_RED,
 	},
 };
 
-static struct gpio_led_platform_data gpio_leds_info = {
-	.leds           = gpio_leds,
-	.num_leds       = ARRAY_SIZE(gpio_leds),
+static struct gpio_led_platform_data igep2_led_pdata = {
+	.leds           = igep2_gpio_leds,
+	.num_leds       = ARRAY_SIZE(igep2_gpio_leds),
 };
 
-static struct platform_device leds_gpio = {
+static struct platform_device igep2_led_device = {
 	 .name   = "leds-gpio",
 	 .id     = -1,
 	 .dev    = {
-		 .platform_data  =  &gpio_leds_info,
+		 .platform_data  =  &igep2_led_pdata,
 	},
 };
+
+static void __init igep2_init_led(void)
+{
+	platform_device_register(&igep2_led_device);
+}
+
+#else
+static inline void igep2_init_led(void) {}
 #endif
 
 static struct platform_device *igep2_devices[] __initdata = {
 	&igep2_dss_device,
-#ifdef CONFIG_LEDS_TRIGGERS
-	&leds_gpio,
-#endif
 };
 
 static void __init igep2_init_irq(void)
@@ -442,7 +457,7 @@ static struct omap_musb_board_data musb_board_data = {
 	.power			= 100,
 };
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 	.port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
 	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
 	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
@@ -471,31 +486,34 @@ static void __init igep2_init(void)
 	usb_ehci_init(&ehci_pdata);
 
 	igep2_flash_init();
+	igep2_init_led();
 	igep2_display_init();
 	igep2_init_smsc911x();
 
 	/* GPIO userspace leds */
-	if ((gpio_request(IGEP2_GPIO_LED0_RED, "GPIO_LED0_RED") == 0) &&
+#if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE)
+	if ((gpio_request(IGEP2_GPIO_LED0_RED, "led0:red") == 0) &&
 	    (gpio_direction_output(IGEP2_GPIO_LED0_RED, 1) == 0)) {
 		gpio_export(IGEP2_GPIO_LED0_RED, 0);
 		gpio_set_value(IGEP2_GPIO_LED0_RED, 0);
 	} else
 		pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_RED\n");
 
-	if ((gpio_request(IGEP2_GPIO_LED0_GREEN, "GPIO_LED0_GREEN") == 0) &&
+	if ((gpio_request(IGEP2_GPIO_LED0_GREEN, "led0:green") == 0) &&
 	    (gpio_direction_output(IGEP2_GPIO_LED0_GREEN, 1) == 0)) {
 		gpio_export(IGEP2_GPIO_LED0_GREEN, 0);
 		gpio_set_value(IGEP2_GPIO_LED0_GREEN, 0);
 	} else
 		pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_GREEN\n");
-#ifndef CONFIG_LEDS_TRIGGERS
-	if ((gpio_request(IGEP2_GPIO_LED1_RED, "GPIO_LED1_RED") == 0) &&
+
+	if ((gpio_request(IGEP2_GPIO_LED1_RED, "led1:red") == 0) &&
 	    (gpio_direction_output(IGEP2_GPIO_LED1_RED, 1) == 0)) {
 		gpio_export(IGEP2_GPIO_LED1_RED, 0);
 		gpio_set_value(IGEP2_GPIO_LED1_RED, 0);
 	} else
 		pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_RED\n");
 #endif
+
 	/* GPIO W-LAN + Bluetooth combo module */
 	if ((gpio_request(IGEP2_GPIO_WIFI_NPD, "GPIO_WIFI_NPD") == 0) &&
 	    (gpio_direction_output(IGEP2_GPIO_WIFI_NPD, 1) == 0)) {
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 4cab0522d7ce..da9bcb898991 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -37,6 +37,103 @@ static int slot1_cover_open;
 static int slot2_cover_open;
 static struct device *mmc_device;
 
+#define TUSB6010_ASYNC_CS	1
+#define TUSB6010_SYNC_CS	4
+#define TUSB6010_GPIO_INT	58
+#define TUSB6010_GPIO_ENABLE	0
+#define TUSB6010_DMACHAN	0x3f
+
+#if defined(CONFIG_USB_TUSB6010) || \
+	defined(CONFIG_USB_TUSB6010_MODULE)
+/*
+ * Enable or disable power to TUSB6010. When enabling, turn on 3.3 V and
+ * 1.5 V voltage regulators of PM companion chip. Companion chip will then
+ * provide then PGOOD signal to TUSB6010 which will release it from reset.
+ */
+static int tusb_set_power(int state)
+{
+	int i, retval = 0;
+
+	if (state) {
+		gpio_set_value(TUSB6010_GPIO_ENABLE, 1);
+		msleep(1);
+
+		/* Wait until TUSB6010 pulls INT pin down */
+		i = 100;
+		while (i && gpio_get_value(TUSB6010_GPIO_INT)) {
+			msleep(1);
+			i--;
+		}
+
+		if (!i) {
+			printk(KERN_ERR "tusb: powerup failed\n");
+			retval = -ENODEV;
+		}
+	} else {
+		gpio_set_value(TUSB6010_GPIO_ENABLE, 0);
+		msleep(10);
+	}
+
+	return retval;
+}
+
+static struct musb_hdrc_config musb_config = {
+	.multipoint	= 1,
+	.dyn_fifo	= 1,
+	.num_eps	= 16,
+	.ram_bits	= 12,
+};
+
+static struct musb_hdrc_platform_data tusb_data = {
+#if defined(CONFIG_USB_MUSB_OTG)
+	.mode		= MUSB_OTG,
+#elif defined(CONFIG_USB_MUSB_PERIPHERAL)
+	.mode		= MUSB_PERIPHERAL,
+#else /* defined(CONFIG_USB_MUSB_HOST) */
+	.mode		= MUSB_HOST,
+#endif
+	.set_power	= tusb_set_power,
+	.min_power	= 25,	/* x2 = 50 mA drawn from VBUS as peripheral */
+	.power		= 100,	/* Max 100 mA VBUS for host mode */
+	.config		= &musb_config,
+};
+
+static void __init n8x0_usb_init(void)
+{
+	int ret = 0;
+	static char	announce[] __initdata = KERN_INFO "TUSB 6010\n";
+
+	/* PM companion chip power control pin */
+	ret = gpio_request(TUSB6010_GPIO_ENABLE, "TUSB6010 enable");
+	if (ret != 0) {
+		printk(KERN_ERR "Could not get TUSB power GPIO%i\n",
+		       TUSB6010_GPIO_ENABLE);
+		return;
+	}
+	gpio_direction_output(TUSB6010_GPIO_ENABLE, 0);
+
+	tusb_set_power(0);
+
+	ret = tusb6010_setup_interface(&tusb_data, TUSB6010_REFCLK_19, 2,
+					TUSB6010_ASYNC_CS, TUSB6010_SYNC_CS,
+					TUSB6010_GPIO_INT, TUSB6010_DMACHAN);
+	if (ret != 0)
+		goto err;
+
+	printk(announce);
+
+	return;
+
+err:
+	gpio_free(TUSB6010_GPIO_ENABLE);
+}
+#else
+
+static void __init n8x0_usb_init(void) {}
+
+#endif /*CONFIG_USB_TUSB6010 */
+
+
 static struct omap2_mcspi_device_config p54spi_mcspi_config = {
 	.turbo_mode	= 0,
 	.single_channel = 1,
@@ -562,6 +659,7 @@ static void __init n8x0_init_machine(void)
 	n8x0_menelaus_init();
 	n8x0_onenand_init();
 	n8x0_mmc_init();
+	n8x0_usb_init();
 }
 
 MACHINE_START(NOKIA_N800, "Nokia N800")
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 6eb77e1f7c82..962d377970e9 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -410,7 +410,7 @@ static void __init omap3beagle_flash_init(void)
 	}
 }
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 
 	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
 	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index d6bc88c426b5..017bb2f4f7d2 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -635,7 +635,7 @@ static struct platform_device *omap3_evm_devices[] __initdata = {
 	&omap3_evm_dss_device,
 };
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = {
 
 	.port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
 	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 4827f4658df3..395d049bf010 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -459,12 +459,20 @@ static struct i2c_board_info __initdata omap3pandora_i2c_boardinfo[] = {
 	},
 };
 
+static struct i2c_board_info __initdata omap3pandora_i2c3_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("bq27500", 0x55),
+		.flags = I2C_CLIENT_WAKE,
+	},
+};
+
 static int __init omap3pandora_i2c_init(void)
 {
 	omap_register_i2c_bus(1, 2600, omap3pandora_i2c_boardinfo,
 			ARRAY_SIZE(omap3pandora_i2c_boardinfo));
 	/* i2c2 pins are not connected */
-	omap_register_i2c_bus(3, 100, NULL, 0);
+	omap_register_i2c_bus(3, 100, omap3pandora_i2c3_boardinfo,
+			ARRAY_SIZE(omap3pandora_i2c3_boardinfo));
 	return 0;
 }
 
@@ -537,7 +545,7 @@ static struct platform_device *omap3pandora_devices[] __initdata = {
 	&pandora_dss_device,
 };
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 
 	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
 	.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 3943d0f8322c..2504d41f923e 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -493,7 +493,7 @@ static void __init omap3touchbook_flash_init(void)
 	}
 }
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 
 	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
 	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
@@ -518,14 +518,14 @@ static void omap3_touchbook_poweroff(void)
 	gpio_direction_output(TB_KILL_POWER_GPIO, 0);
 }
 
-static void __init early_touchbook_revision(char **p)
+static int __init early_touchbook_revision(char *p)
 {
-	if (!*p)
-		return;
+	if (!p)
+		return 0;
 
-	strict_strtoul(*p, 10, &touchbook_revision);
+	return strict_strtoul(p, 10, &touchbook_revision);
 }
-__early_param("tbr=", early_touchbook_revision);
+early_param("tbr", early_touchbook_revision);
 
 static struct omap_musb_board_data musb_board_data = {
 	.interface_type		= MUSB_INTERFACE_ULPI,
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 50872a42bec7..8848c7c5ce48 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -394,7 +394,7 @@ static struct platform_device *overo_devices[] __initdata = {
 	&overo_lcd_device,
 };
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 	.port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
 	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
 	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index ca95d8d64136..ca95d8d64136 100755..100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
diff --git a/arch/arm/mach-omap2/board-zoom3.c b/arch/arm/mach-omap2/board-zoom3.c
index d3e3cd5170d1..cd3e40cf3ac1 100644
--- a/arch/arm/mach-omap2/board-zoom3.c
+++ b/arch/arm/mach-omap2/board-zoom3.c
@@ -52,7 +52,7 @@ static struct omap_board_mux board_mux[] __initdata = {
 #define board_mux	NULL
 #endif
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 	.port_mode[0]		= EHCI_HCD_OMAP_MODE_UNKNOWN,
 	.port_mode[1]		= EHCI_HCD_OMAP_MODE_PHY,
 	.port_mode[2]		= EHCI_HCD_OMAP_MODE_UNKNOWN,
diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c
index f12af95ead45..d932b142d0b6 100644
--- a/arch/arm/mach-omap2/clock2420_data.c
+++ b/arch/arm/mach-omap2/clock2420_data.c
@@ -1841,6 +1841,7 @@ static struct omap_clk omap2420_clks[] = {
 	CLK(NULL,	"aes_ick",	&aes_ick,	CK_242X),
 	CLK(NULL,	"pka_ick",	&pka_ick,	CK_242X),
 	CLK(NULL,	"usb_fck",	&usb_fck,	CK_242X),
+	CLK("musb_hdrc",	"fck",	&osc_ck,	CK_242X),
 };
 
 /*
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 402e8f0d0f21..87f676acf61d 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -237,7 +237,7 @@ static void __init _omap2_map_common_io(void)
 }
 
 #ifdef CONFIG_ARCH_OMAP2420
-void __init omap242x_map_common_io()
+void __init omap242x_map_common_io(void)
 {
 	iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
 	iotable_init(omap242x_io_desc, ARRAY_SIZE(omap242x_io_desc));
@@ -246,7 +246,7 @@ void __init omap242x_map_common_io()
 #endif
 
 #ifdef CONFIG_ARCH_OMAP2430
-void __init omap243x_map_common_io()
+void __init omap243x_map_common_io(void)
 {
 	iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
 	iotable_init(omap243x_io_desc, ARRAY_SIZE(omap243x_io_desc));
@@ -255,7 +255,7 @@ void __init omap243x_map_common_io()
 #endif
 
 #ifdef CONFIG_ARCH_OMAP3
-void __init omap34xx_map_common_io()
+void __init omap34xx_map_common_io(void)
 {
 	iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc));
 	_omap2_map_common_io();
@@ -263,7 +263,7 @@ void __init omap34xx_map_common_io()
 #endif
 
 #ifdef CONFIG_ARCH_OMAP4
-void __init omap44xx_map_common_io()
+void __init omap44xx_map_common_io(void)
 {
 	iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc));
 	_omap2_map_common_io();
@@ -309,7 +309,6 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
 {
 	pwrdm_init(powerdomains_omap);
 	clkdm_init(clockdomains_omap, clkdm_autodeps);
-#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once the clkdev is ready */
 	if (cpu_is_omap242x())
 		omap2420_hwmod_init();
 	else if (cpu_is_omap243x())
@@ -319,7 +318,6 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
 	omap2_mux_init();
 	/* The OPP tables have to be registered before a clk init */
 	omap_pm_if_early_init(mpu_opps, dsp_opps, l3_opps);
-#endif
 
 	if (cpu_is_omap2420())
 		omap2420_clk_init();
@@ -333,11 +331,12 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
 		pr_err("Could not init clock framework - unknown CPU\n");
 
 	omap_serial_early_init();
-#ifndef CONFIG_ARCH_OMAP4
-	omap_hwmod_late_init();
+	if (cpu_is_omap24xx() || cpu_is_omap34xx())   /* FIXME: OMAP4 */
+		omap_hwmod_late_init();
 	omap_pm_if_init();
-	omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
-	_omap2_init_reprogram_sdrc();
-#endif
+	if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
+		omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
+		_omap2_init_reprogram_sdrc();
+	}
 	gpmc_init();
 }
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index 52a981cb8fdd..318f3638653c 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -430,19 +430,19 @@ static int __devinit omap2_mbox_probe(struct platform_device *pdev)
 		if (unlikely(!res)) {
 			dev_err(&pdev->dev, "invalid irq resource\n");
 			ret = -ENODEV;
-			goto err_iva1;
+			omap_mbox_unregister(&mbox_dsp_info);
+			goto err_dsp;
 		}
 		mbox_iva_info.irq = res->start;
 		ret = omap_mbox_register(&pdev->dev, &mbox_iva_info);
-		if (ret)
-			goto err_iva1;
+		if (ret) {
+			omap_mbox_unregister(&mbox_dsp_info);
+			goto err_dsp;
+		}
 	}
 #endif
 	return 0;
 
-err_iva1:
-	omap_mbox_unregister(&mbox_dsp_info);
-
 err_dsp:
 	iounmap(mbox_base);
 	return ret;
diff --git a/arch/arm/mach-omap2/omap44xx-smc.S b/arch/arm/mach-omap2/omap44xx-smc.S
new file mode 100644
index 000000000000..89bb2b141473
--- /dev/null
+++ b/arch/arm/mach-omap2/omap44xx-smc.S
@@ -0,0 +1,32 @@
+/*
+ * OMAP44xx secure APIs file.
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Written by Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ *
+ * This program is free software,you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+
+/*
+ * This is common routine to manage secure monitor API
+ * used to modify the PL310 secure registers.
+ * 'r0' contains the value to be modified and 'r12' contains
+ * the monitor API number. It uses few CPU registers
+ * internally and hence they need be backed up including
+ * link register "lr".
+ * Function signature : void omap_smc1(u32 fn, u32 arg)
+ */
+
+ENTRY(omap_smc1)
+	stmfd   sp!, {r2-r12, lr}
+	mov	r12, r0
+	mov 	r0, r1
+	dsb
+	smc
+	ldmfd   sp!, {r2-r12, pc}
+END(omap_smc1)
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index 81872aacb801..9537f6f2352d 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -133,7 +133,7 @@ u32 omap_prcm_get_reset_sources(void)
 EXPORT_SYMBOL(omap_prcm_get_reset_sources);
 
 /* Resets clock rates and reboots the system. Only called from system.h */
-void omap_prcm_arch_reset(char mode)
+void omap_prcm_arch_reset(char mode, const char *cmd)
 {
 	s16 prcm_offs = 0;
 
@@ -145,7 +145,7 @@ void omap_prcm_arch_reset(char mode)
 		u32 l;
 
 		prcm_offs = OMAP3430_GR_MOD;
-		l = ('B' << 24) | ('M' << 16) | mode;
+		l = ('B' << 24) | ('M' << 16) | (cmd ? (u8)*cmd : 0);
 		/* Reserve the first word in scratchpad for communicating
 		 * with the boot ROM. A pointer to a data structure
 		 * describing the boot process can be stored there,
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index b79bc8926cc9..da77930480e9 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -644,16 +644,21 @@ static void serial_out_override(struct uart_port *up, int offset, int value)
 }
 void __init omap_serial_early_init(void)
 {
-	int i;
+	int i, nr_ports;
 	char name[16];
 
+	if (!(cpu_is_omap3630() || cpu_is_omap4430()))
+		nr_ports = 3;
+	else
+		nr_ports = ARRAY_SIZE(omap_uart);
+
 	/*
 	 * Make sure the serial ports are muxed on at this point.
 	 * You have to mux them off in device drivers later on
 	 * if not needed.
 	 */
 
-	for (i = 0; i < ARRAY_SIZE(omap_uart); i++) {
+	for (i = 0; i < nr_ports; i++) {
 		struct omap_uart_state *uart = &omap_uart[i];
 		struct platform_device *pdev = &uart->pdev;
 		struct device *dev = &pdev->dev;
@@ -669,17 +674,17 @@ void __init omap_serial_early_init(void)
 			continue;
 		}
 
-		sprintf(name, "uart%d_ick", i+1);
+		sprintf(name, "uart%d_ick", i + 1);
 		uart->ick = clk_get(NULL, name);
 		if (IS_ERR(uart->ick)) {
-			printk(KERN_ERR "Could not get uart%d_ick\n", i+1);
+			printk(KERN_ERR "Could not get uart%d_ick\n", i + 1);
 			uart->ick = NULL;
 		}
 
 		sprintf(name, "uart%d_fck", i+1);
 		uart->fck = clk_get(NULL, name);
 		if (IS_ERR(uart->fck)) {
-			printk(KERN_ERR "Could not get uart%d_fck\n", i+1);
+			printk(KERN_ERR "Could not get uart%d_fck\n", i + 1);
 			uart->fck = NULL;
 		}
 
diff --git a/arch/arm/mach-omap2/usb-ehci.c b/arch/arm/mach-omap2/usb-ehci.c
index f1df873d59db..ee9f548d5d81 100644
--- a/arch/arm/mach-omap2/usb-ehci.c
+++ b/arch/arm/mach-omap2/usb-ehci.c
@@ -70,7 +70,7 @@ static struct platform_device ehci_device = {
 /*
  * setup_ehci_io_mux - initialize IO pad mux for USBHOST
  */
-static void setup_ehci_io_mux(enum ehci_hcd_omap_mode *port_mode)
+static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
 {
 	switch (port_mode[0]) {
 	case EHCI_HCD_OMAP_MODE_PHY:
@@ -213,7 +213,7 @@ static void setup_ehci_io_mux(enum ehci_hcd_omap_mode *port_mode)
 	return;
 }
 
-void __init usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata)
+void __init usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata)
 {
 	platform_device_add_data(&ehci_device, pdata, sizeof(*pdata));
 
@@ -229,7 +229,7 @@ void __init usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata)
 
 #else
 
-void __init usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata)
+void __init usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata)
 
 {
 }
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index c3d513cad5ac..905719a677ae 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -57,6 +57,13 @@ config MACH_LINKSTATION_MINI
 	  Say 'Y' here if you want your kernel to support the
 	  Buffalo Linkstation Mini platform.
 
+config MACH_LINKSTATION_LS_HGL
+	bool "Buffalo Linkstation LS-HGL"
+	select I2C_BOARDINFO
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Buffalo Linkstation LS-HGL platform.
+
 config MACH_TS409
 	bool "QNAP TS-409"
 	help
diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile
index 89772fcd65c7..eb6eabcb41e4 100644
--- a/arch/arm/mach-orion5x/Makefile
+++ b/arch/arm/mach-orion5x/Makefile
@@ -5,6 +5,7 @@ obj-$(CONFIG_MACH_KUROBOX_PRO)	+= kurobox_pro-setup.o
 obj-$(CONFIG_MACH_TERASTATION_PRO2)	+= terastation_pro2-setup.o
 obj-$(CONFIG_MACH_LINKSTATION_PRO) += kurobox_pro-setup.o
 obj-$(CONFIG_MACH_LINKSTATION_MINI) += lsmini-setup.o
+obj-$(CONFIG_MACH_LINKSTATION_LS_HGL) += ls_hgl-setup.o
 obj-$(CONFIG_MACH_DNS323)	+= dns323-setup.o
 obj-$(CONFIG_MACH_TS209)	+= ts209-setup.o tsx09-common.o
 obj-$(CONFIG_MACH_TS409)	+= ts409-setup.o tsx09-common.o
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index f87fa1253803..8dc2c76d2260 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -488,7 +488,7 @@ static struct platform_device orion5x_xor0_channel = {
 	.dev		= {
 		.dma_mask		= &orion5x_xor_dmamask,
 		.coherent_dma_mask	= DMA_BIT_MASK(64),
-		.platform_data		= (void *)&orion5x_xor0_data,
+		.platform_data		= &orion5x_xor0_data,
 	},
 };
 
@@ -514,7 +514,7 @@ static struct platform_device orion5x_xor1_channel = {
 	.dev		= {
 		.dma_mask		= &orion5x_xor_dmamask,
 		.coherent_dma_mask	= DMA_BIT_MASK(64),
-		.platform_data		= (void *)&orion5x_xor1_data,
+		.platform_data		= &orion5x_xor1_data,
 	},
 };
 
diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c
index 9d4bf763f25b..7130904ad999 100644
--- a/arch/arm/mach-orion5x/d2net-setup.c
+++ b/arch/arm/mach-orion5x/d2net-setup.c
@@ -149,10 +149,7 @@ static void __init d2net_sata_power_init(void)
 
 /*
  * The blue front LED is wired to the CPLD and can blink in relation with the
- * SATA activity. This feature is disabled to make this LED compatible with
- * the leds-gpio driver: MPP14 and MPP15 are configured to act like output
- * GPIO's and have to stay in an active state. This is needed to set the blue
- * LED in a "fix on" state regardless of the SATA activity.
+ * SATA activity.
  *
  * The following array detail the different LED registers and the combination
  * of their possible values:
@@ -171,12 +168,11 @@ static void __init d2net_sata_power_init(void)
 #define D2NET_GPIO_RED_LED		6
 #define D2NET_GPIO_BLUE_LED_BLINK_CTRL	16
 #define D2NET_GPIO_BLUE_LED_OFF		23
-#define D2NET_GPIO_SATA0_ACT		14
-#define D2NET_GPIO_SATA1_ACT		15
 
 static struct gpio_led d2net_leds[] = {
 	{
-		.name = "d2net:blue:power",
+		.name = "d2net:blue:sata",
+		.default_trigger = "default-on",
 		.gpio = D2NET_GPIO_BLUE_LED_OFF,
 		.active_low = 1,
 	},
@@ -201,25 +197,22 @@ static struct platform_device d2net_gpio_leds = {
 
 static void __init d2net_gpio_leds_init(void)
 {
+	int err;
+
 	/* Configure GPIO over MPP max number. */
 	orion_gpio_set_valid(D2NET_GPIO_BLUE_LED_OFF, 1);
 
-	if (gpio_request(D2NET_GPIO_SATA0_ACT, "LED SATA0 activity") != 0)
-		return;
-	if (gpio_direction_output(D2NET_GPIO_SATA0_ACT, 1) != 0)
-		goto err_free_1;
-	if (gpio_request(D2NET_GPIO_SATA1_ACT, "LED SATA1 activity") != 0)
-		goto err_free_1;
-	if (gpio_direction_output(D2NET_GPIO_SATA1_ACT, 1) != 0)
-		goto err_free_2;
-	platform_device_register(&d2net_gpio_leds);
-	return;
+	/* Configure register blink_ctrl to allow SATA activity LED blinking. */
+	err = gpio_request(D2NET_GPIO_BLUE_LED_BLINK_CTRL, "blue LED blink");
+	if (err == 0) {
+		err = gpio_direction_output(D2NET_GPIO_BLUE_LED_BLINK_CTRL, 1);
+		if (err)
+			gpio_free(D2NET_GPIO_BLUE_LED_BLINK_CTRL);
+	}
+	if (err)
+		pr_err("d2net: failed to configure blue LED blink GPIO\n");
 
-err_free_2:
-	gpio_free(D2NET_GPIO_SATA1_ACT);
-err_free_1:
-	gpio_free(D2NET_GPIO_SATA0_ACT);
-	return;
+	platform_device_register(&d2net_gpio_leds);
 }
 
 /****************************************************************************
@@ -289,8 +282,8 @@ static struct orion5x_mpp_mode d2net_mpp_modes[] __initdata = {
 	{ 11, MPP_UNUSED },
 	{ 12, MPP_GPIO },	/* SATA 1 power */
 	{ 13, MPP_UNUSED },
-	{ 14, MPP_GPIO },	/* SATA 0 active */
-	{ 15, MPP_GPIO },	/* SATA 1 active */
+	{ 14, MPP_SATA_LED },	/* SATA 0 active */
+	{ 15, MPP_SATA_LED },	/* SATA 1 active */
 	{ 16, MPP_GPIO },	/* Blue front LED blink control */
 	{ 17, MPP_UNUSED },
 	{ 18, MPP_GPIO },	/* Front button (0 = Released, 1 = Pushed ) */
@@ -301,6 +294,8 @@ static struct orion5x_mpp_mode d2net_mpp_modes[] __initdata = {
 	/* 24: Inhibit board power off (0 = Disabled, 1 = Enabled) */
 };
 
+#define D2NET_GPIO_INHIBIT_POWER_OFF    24
+
 static void __init d2net_init(void)
 {
 	/*
@@ -333,6 +328,8 @@ static void __init d2net_init(void)
 
 	i2c_register_board_info(0, d2net_i2c_devices,
 				ARRAY_SIZE(d2net_i2c_devices));
+
+	orion_gpio_set_valid(D2NET_GPIO_INHIBIT_POWER_OFF, 1);
 }
 
 /* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 8f159db4d08a..421b82f7c63d 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -34,7 +34,8 @@
 #define DNS323_GPIO_LED_RIGHT_AMBER	1
 #define DNS323_GPIO_LED_LEFT_AMBER	2
 #define DNS323_GPIO_SYSTEM_UP		3
-#define DNS323_GPIO_LED_POWER		5
+#define DNS323_GPIO_LED_POWER1		4
+#define DNS323_GPIO_LED_POWER2		5
 #define DNS323_GPIO_OVERTEMP		6
 #define DNS323_GPIO_RTC			7
 #define DNS323_GPIO_POWER_OFF		8
@@ -237,11 +238,31 @@ error_fail:
  * GPIO LEDs (simple - doesn't use hardware blinking support)
  */
 
+#define ORION_BLINK_HALF_PERIOD 100 /* ms */
+
+static int dns323_gpio_blink_set(unsigned gpio,
+	unsigned long *delay_on, unsigned long *delay_off)
+{
+	static int value = 0;
+
+	if (!*delay_on && !*delay_off)
+		*delay_on = *delay_off = ORION_BLINK_HALF_PERIOD;
+
+	if (ORION_BLINK_HALF_PERIOD == *delay_on
+	    && ORION_BLINK_HALF_PERIOD == *delay_off) {
+		value = !value;
+		orion_gpio_set_blink(gpio, value);
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
 static struct gpio_led dns323_leds[] = {
 	{
 		.name = "power:blue",
-		.gpio = DNS323_GPIO_LED_POWER,
-		.default_state = LEDS_GPIO_DEFSTATE_ON,
+		.gpio = DNS323_GPIO_LED_POWER2,
+		.default_trigger = "timer",
 	}, {
 		.name = "right:amber",
 		.gpio = DNS323_GPIO_LED_RIGHT_AMBER,
@@ -256,6 +277,7 @@ static struct gpio_led dns323_leds[] = {
 static struct gpio_led_platform_data dns323_led_data = {
 	.num_leds	= ARRAY_SIZE(dns323_leds),
 	.leds		= dns323_leds,
+	.gpio_blink_set = dns323_gpio_blink_set,
 };
 
 static struct platform_device dns323_gpio_leds = {
@@ -412,6 +434,14 @@ static void __init dns323_init(void)
 	orion5x_setup_dev_boot_win(DNS323_NOR_BOOT_BASE, DNS323_NOR_BOOT_SIZE);
 	platform_device_register(&dns323_nor_flash);
 
+	/* The 5181 power LED is active low and requires
+	 * DNS323_GPIO_LED_POWER1 to also be low.
+	 */
+	if (dns323_dev_id() == MV88F5181_DEV_ID) {
+		dns323_leds[0].active_low = 1;
+		gpio_direction_output(DNS323_GPIO_LED_POWER1, 0);
+	}
+
 	platform_device_register(&dns323_gpio_leds);
 
 	platform_device_register(&dns323_button_device);
diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c
new file mode 100644
index 000000000000..8e569be6e2c7
--- /dev/null
+++ b/arch/arm/mach-orion5x/ls_hgl-setup.c
@@ -0,0 +1,276 @@
+/*
+ * arch/arm/mach-orion5x/ls_hgl-setup.c
+ *
+ * Maintainer: Zhu Qingsen <zhuqs@cn.fujitsu.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/system.h>
+#include <mach/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+/*****************************************************************************
+ * Linkstation LS-HGL Info
+ ****************************************************************************/
+
+/*
+ * 256K NOR flash Device bus boot chip select
+ */
+
+#define LS_HGL_NOR_BOOT_BASE	0xf4000000
+#define LS_HGL_NOR_BOOT_SIZE	SZ_256K
+
+/*****************************************************************************
+ * 256KB NOR Flash on BOOT Device
+ ****************************************************************************/
+
+static struct physmap_flash_data ls_hgl_nor_flash_data = {
+	.width		= 1,
+};
+
+static struct resource ls_hgl_nor_flash_resource = {
+	.flags	= IORESOURCE_MEM,
+	.start	= LS_HGL_NOR_BOOT_BASE,
+	.end	= LS_HGL_NOR_BOOT_BASE + LS_HGL_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device ls_hgl_nor_flash = {
+	.name			= "physmap-flash",
+	.id			= 0,
+	.dev		= {
+		.platform_data	= &ls_hgl_nor_flash_data,
+	},
+	.num_resources		= 1,
+	.resource		= &ls_hgl_nor_flash_resource,
+};
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data ls_hgl_eth_data = {
+	.phy_addr	= 8,
+};
+
+/*****************************************************************************
+ * RTC 5C372a on I2C bus
+ ****************************************************************************/
+
+static struct i2c_board_info __initdata ls_hgl_i2c_rtc = {
+	I2C_BOARD_INFO("rs5c372a", 0x32),
+};
+
+/*****************************************************************************
+ * LEDs attached to GPIO
+ ****************************************************************************/
+
+#define LS_HGL_GPIO_LED_ALARM   2
+#define LS_HGL_GPIO_LED_INFO    3
+#define LS_HGL_GPIO_LED_FUNC    17
+#define LS_HGL_GPIO_LED_PWR     0
+
+
+static struct gpio_led ls_hgl_led_pins[] = {
+	{
+		.name	   = "alarm:red",
+		.gpio	   = LS_HGL_GPIO_LED_ALARM,
+		.active_low     = 1,
+	}, {
+		.name	   = "info:amber",
+		.gpio	   = LS_HGL_GPIO_LED_INFO,
+		.active_low     = 1,
+	}, {
+		.name	   = "func:blue:top",
+		.gpio	   = LS_HGL_GPIO_LED_FUNC,
+		.active_low     = 1,
+	}, {
+		.name	   = "power:blue:bottom",
+		.gpio	   = LS_HGL_GPIO_LED_PWR,
+	},
+};
+
+static struct gpio_led_platform_data ls_hgl_led_data = {
+	.leds	   = ls_hgl_led_pins,
+	.num_leds       = ARRAY_SIZE(ls_hgl_led_pins),
+};
+
+static struct platform_device ls_hgl_leds = {
+	.name   = "leds-gpio",
+	.id     = -1,
+	.dev    = {
+		.platform_data  = &ls_hgl_led_data,
+	},
+};
+
+/****************************************************************************
+ * GPIO Attached Keys
+ ****************************************************************************/
+#define LS_HGL_GPIO_KEY_FUNC       15
+#define LS_HGL_GPIO_KEY_POWER      8
+#define LS_HGL_GPIO_KEY_AUTOPOWER  10
+
+#define LS_HGL_SW_POWER     0x00
+#define LS_HGL_SW_AUTOPOWER 0x01
+
+static struct gpio_keys_button ls_hgl_buttons[] = {
+	{
+		.code	   = KEY_OPTION,
+		.gpio	   = LS_HGL_GPIO_KEY_FUNC,
+		.desc	   = "Function Button",
+		.active_low     = 1,
+	}, {
+		.type		= EV_SW,
+		.code	   = LS_HGL_SW_POWER,
+		.gpio	   = LS_HGL_GPIO_KEY_POWER,
+		.desc	   = "Power-on Switch",
+		.active_low     = 1,
+	}, {
+		.type		= EV_SW,
+		.code	   = LS_HGL_SW_AUTOPOWER,
+		.gpio	   = LS_HGL_GPIO_KEY_AUTOPOWER,
+		.desc	   = "Power-auto Switch",
+		.active_low     = 1,
+	},
+};
+
+static struct gpio_keys_platform_data ls_hgl_button_data = {
+	.buttons	= ls_hgl_buttons,
+	.nbuttons       = ARRAY_SIZE(ls_hgl_buttons),
+};
+
+static struct platform_device ls_hgl_button_device = {
+	.name	   = "gpio-keys",
+	.id	     = -1,
+	.num_resources  = 0,
+	.dev	    = {
+		.platform_data  = &ls_hgl_button_data,
+	},
+};
+
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+static struct mv_sata_platform_data ls_hgl_sata_data = {
+	.n_ports	= 2,
+};
+
+
+/*****************************************************************************
+ * Linkstation LS-HGL specific power off method: reboot
+ ****************************************************************************/
+/*
+ * On the Linkstation LS-HGL, the shutdown process is following:
+ * - Userland monitors key events until the power switch goes to off position
+ * - The board reboots
+ * - U-boot starts and goes into an idle mode waiting for the user
+ *   to move the switch to ON position
+ */
+
+static void ls_hgl_power_off(void)
+{
+	arm_machine_restart('h', NULL);
+}
+
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+#define LS_HGL_GPIO_USB_POWER	9
+#define LS_HGL_GPIO_AUTO_POWER	10
+#define LS_HGL_GPIO_POWER	    8
+
+#define LS_HGL_GPIO_HDD_POWER	1
+
+static struct orion5x_mpp_mode ls_hgl_mpp_modes[] __initdata = {
+	{  0, MPP_GPIO }, /* LED_PWR */
+	{  1, MPP_GPIO }, /* HDD_PWR */
+	{  2, MPP_GPIO }, /* LED_ALARM */
+	{  3, MPP_GPIO }, /* LED_INFO */
+	{  4, MPP_UNUSED },
+	{  5, MPP_UNUSED },
+	{  6, MPP_GPIO }, /* FAN_LCK */
+	{  7, MPP_GPIO }, /* INIT */
+	{  8, MPP_GPIO }, /* POWER */
+	{  9, MPP_GPIO }, /* USB_PWR */
+	{ 10, MPP_GPIO }, /* AUTO_POWER */
+	{ 11, MPP_UNUSED }, /* LED_ETH (dummy) */
+	{ 12, MPP_UNUSED },
+	{ 13, MPP_UNUSED },
+	{ 14, MPP_UNUSED },
+	{ 15, MPP_GPIO }, /* FUNC */
+	{ 16, MPP_UNUSED },
+	{ 17, MPP_GPIO }, /* LED_FUNC */
+	{ 18, MPP_UNUSED },
+	{ 19, MPP_UNUSED },
+	{ -1 },
+};
+
+static void __init ls_hgl_init(void)
+{
+	/*
+	 * Setup basic Orion functions. Need to be called early.
+	 */
+	orion5x_init();
+
+	orion5x_mpp_conf(ls_hgl_mpp_modes);
+
+	/*
+	 * Configure peripherals.
+	 */
+	orion5x_ehci0_init();
+	orion5x_ehci1_init();
+	orion5x_eth_init(&ls_hgl_eth_data);
+	orion5x_i2c_init();
+	orion5x_sata_init(&ls_hgl_sata_data);
+	orion5x_uart0_init();
+	orion5x_xor_init();
+
+	orion5x_setup_dev_boot_win(LS_HGL_NOR_BOOT_BASE,
+				   LS_HGL_NOR_BOOT_SIZE);
+	platform_device_register(&ls_hgl_nor_flash);
+
+	platform_device_register(&ls_hgl_button_device);
+
+	platform_device_register(&ls_hgl_leds);
+
+	i2c_register_board_info(0, &ls_hgl_i2c_rtc, 1);
+
+	/* enable USB power */
+	gpio_set_value(LS_HGL_GPIO_USB_POWER, 1);
+
+	/* register power-off method */
+	pm_power_off = ls_hgl_power_off;
+
+	pr_info("%s: finished\n", __func__);
+}
+
+MACHINE_START(LINKSTATION_LS_HGL, "Buffalo Linkstation LS-HGL")
+	/* Maintainer: Zhu Qingsen <zhuqs@cn.fujistu.com> */
+	.phys_io	= ORION5X_REGS_PHYS_BASE,
+	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+	.boot_params	= 0x00000100,
+	.init_machine	= ls_hgl_init,
+	.map_io		= orion5x_map_io,
+	.init_irq	= orion5x_init_irq,
+	.timer		= &orion5x_timer,
+	.fixup		= tag_fixup_mem32,
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c
index c9bf6b81a80d..c704f056de1e 100644
--- a/arch/arm/mach-orion5x/lsmini-setup.c
+++ b/arch/arm/mach-orion5x/lsmini-setup.c
@@ -11,7 +11,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/pci.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/leds.h>
@@ -19,12 +18,13 @@
 #include <linux/input.h>
 #include <linux/i2c.h>
 #include <linux/ata_platform.h>
-#include <asm/mach-types.h>
 #include <linux/gpio.h>
+#include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/system.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
-#include "include/mach/system.h"
 
 /*****************************************************************************
  * Linkstation Mini Info
@@ -186,7 +186,7 @@ static struct mv_sata_platform_data lsmini_sata_data = {
 
 static void lsmini_power_off(void)
 {
-	arch_reset(0, NULL);
+	arm_machine_restart('h', NULL);
 }
 
 
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index dee92182749b..38fbd0a0e402 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -115,6 +115,11 @@ config MACH_CM_X300
 	select CPU_PXA310
 	select HAVE_PWM
 
+config MACH_CAPC7117
+	bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM"
+	select CPU_PXA320
+	select PXA3xx
+
 config ARCH_GUMSTIX
 	bool "Gumstix XScale 255 boards"
 	select PXA25x
@@ -417,6 +422,24 @@ config MACH_TREO680
 	  Say Y here if you intend to run this kernel on Palm Treo 680
 	  smartphone.
 
+config MACH_RAUMFELD_RC
+	bool "Raumfeld Controller"
+	select PXA3xx
+	select CPU_PXA300
+	select HAVE_PWM
+
+config MACH_RAUMFELD_CONNECTOR
+	bool "Raumfeld Connector"
+	select PXA3xx
+	select CPU_PXA300
+	select PXA_SSP
+
+config MACH_RAUMFELD_SPEAKER
+	bool "Raumfeld Speaker"
+	select PXA3xx
+	select CPU_PXA300
+	select PXA_SSP
+
 config PXA_SHARPSL
 	bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
 	select SHARP_SCOOP
@@ -435,6 +458,7 @@ config SHARPSL_PM
 config CORGI_SSP_DEPRECATED
 	bool
 	select PXA_SSP
+	select PXA_SSP_LEGACY
 	help
 	  This option will include corgi_ssp.c and corgi_lcd.c
 	  that corgi_ts.c and other legacy drivers (corgi_bl.c
@@ -446,6 +470,7 @@ config MACH_POODLE
 	select PXA25x
 	select SHARP_LOCOMO
 	select PXA_SSP
+	select PXA_HAVE_BOARD_IRQS
 
 config MACH_CORGI
 	bool "Enable Sharp SL-C700 (Corgi) Support"
@@ -492,6 +517,11 @@ config MACH_TOSA
 	select PXA25x
 	select PXA_HAVE_BOARD_IRQS
 
+config MACH_ICONTROL
+	bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM"
+	select CPU_PXA320
+	select PXA3xx
+
 config ARCH_PXA_ESERIES
 	bool "PXA based Toshiba e-series PDAs"
 	select PXA25x
@@ -629,6 +659,11 @@ config PXA_SSP
 	help
 	  Enable support for PXA2xx SSP ports
 
+config PXA_SSP_LEGACY
+	bool
+	help
+	  Support of legacy SSP API
+
 config TOSA_BT
 	tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
 	depends on MACH_TOSA
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index f64afda7e6f6..86bc87b7f2dd 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -48,6 +48,7 @@ obj-$(CONFIG_MACH_ARMCORE)	+= cm-x2xx-pci.o
 endif
 obj-$(CONFIG_MACH_EM_X270)	+= em-x270.o
 obj-$(CONFIG_MACH_CM_X300)      += cm-x300.o
+obj-$(CONFIG_MACH_CAPC7117)     += capc7117.o mxm8x10.o
 obj-$(CONFIG_ARCH_GUMSTIX)	+= gumstix.o
 obj-$(CONFIG_GUMSTIX_AM200EPD)	+= am200epd.o
 obj-$(CONFIG_GUMSTIX_AM300EPD)	+= am300epd.o
@@ -82,6 +83,7 @@ obj-$(CONFIG_PXA_SHARP_Cxx00)	+= spitz.o sharpsl_pm.o spitz_pm.o
 obj-$(CONFIG_CORGI_SSP_DEPRECATED)	+= corgi_ssp.o corgi_lcd.o
 obj-$(CONFIG_MACH_POODLE)	+= poodle.o
 obj-$(CONFIG_MACH_TOSA)		+= tosa.o
+obj-$(CONFIG_MACH_ICONTROL)     += icontrol.o mxm8x10.o
 obj-$(CONFIG_ARCH_PXA_ESERIES)	+= eseries.o
 obj-$(CONFIG_MACH_E330)		+= e330.o
 obj-$(CONFIG_MACH_E350)		+= e350.o
@@ -89,6 +91,9 @@ obj-$(CONFIG_MACH_E740)		+= e740.o
 obj-$(CONFIG_MACH_E750)		+= e750.o
 obj-$(CONFIG_MACH_E400)		+= e400.o
 obj-$(CONFIG_MACH_E800)		+= e800.o
+obj-$(CONFIG_MACH_RAUMFELD_RC)		+= raumfeld.o
+obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR)	+= raumfeld.o
+obj-$(CONFIG_MACH_RAUMFELD_SPEAKER)	+= raumfeld.o
 
 # Support for blinky lights
 led-y := leds.o
diff --git a/arch/arm/mach-pxa/am300epd.c b/arch/arm/mach-pxa/am300epd.c
index 4bd10a17332e..993d75e66390 100644
--- a/arch/arm/mach-pxa/am300epd.c
+++ b/arch/arm/mach-pxa/am300epd.c
@@ -288,7 +288,7 @@ int __init am300_init(void)
 }
 
 module_param(panel_type, uint, 0);
-MODULE_PARM_DESC(panel_type, "Select the panel type: 6, 8, 97");
+MODULE_PARM_DESC(panel_type, "Select the panel type: 37, 6, 97");
 
 MODULE_DESCRIPTION("board driver for am300 epd kit");
 MODULE_AUTHOR("Jaya Kumar");
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index b8cd07ca9380..f3b5ace815e5 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -132,6 +132,14 @@ static void __init balloon3_init_irq(void)
 		"enabled\n", __func__, BALLOON3_AUX_NIRQ);
 }
 
+static unsigned long balloon3_ac97_pin_config[] = {
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+	GPIO113_AC97_nRESET,
+};
+
 static void balloon3_backlight_power(int on)
 {
 	pr_debug("%s: power is %s\n", __func__, on ? "on" : "off");
@@ -140,26 +148,7 @@ static void balloon3_backlight_power(int on)
 
 static unsigned long balloon3_lcd_pin_config[] = {
 	/* LCD - 16bpp Active TFT */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
+	GPIOxx_LCD_TFT_16BPP,
 
 	GPIO99_GPIO,		/* Backlight */
 };
@@ -311,8 +300,10 @@ static void __init balloon3_init(void)
 	pxa_set_stuart_info(NULL);
 
 	pxa_set_i2c_info(NULL);
-	if (balloon3_has(BALLOON3_FEATURE_AUDIO))
+	if (balloon3_has(BALLOON3_FEATURE_AUDIO)) {
+		pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ac97_pin_config));
 		pxa_set_ac97_info(NULL);
+	}
 
 	if (balloon3_has(BALLOON3_FEATURE_TOPPOLY)) {
 		pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_lcd_pin_config));
diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c
new file mode 100644
index 000000000000..aae544631a8b
--- /dev/null
+++ b/arch/arm/mach-pxa/capc7117.c
@@ -0,0 +1,158 @@
+/*
+ * linux/arch/arm/mach-pxa/capc7117.c
+ *
+ * Support for the Embedian CAPC-7117 Evaluation Kit
+ * based on the Embedian MXM-8x10 Computer on Module
+ *
+ * Copyright (C) 2009 Embedian Inc.
+ * Copyright (C) 2009 TMT Services & Supplies (Pty) Ltd.
+ *
+ * 2007-09-04: eric miao <eric.y.miao@gmail.com>
+ *             rewrite to align with latest kernel
+ *
+ * 2010-01-09: Edwin Peer <epeer@tmtservices.co.za>
+ *             Hennie van der Merwe <hvdmerwe@tmtservices.co.za>
+ *             rework for upstream merge
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/serial_8250.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/pxa320.h>
+#include <mach/mxm8x10.h>
+
+#include "generic.h"
+
+/* IDE (PATA) Support */
+static struct pata_platform_info pata_platform_data = {
+	.ioport_shift = 1
+};
+
+static struct resource capc7117_ide_resources[] = {
+	[0] = {
+	       .start = 0x11000020,
+	       .end = 0x1100003f,
+	       .flags = IORESOURCE_MEM
+	},
+	[1] = {
+	       .start = 0x1100001c,
+	       .end = 0x1100001c,
+	       .flags = IORESOURCE_MEM
+	},
+	[2] = {
+	       .start = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO76)),
+	       .end = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO76)),
+	       .flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING
+	}
+};
+
+static struct platform_device capc7117_ide_device = {
+	.name = "pata_platform",
+	.num_resources = ARRAY_SIZE(capc7117_ide_resources),
+	.resource = capc7117_ide_resources,
+	.dev = {
+		.platform_data = &pata_platform_data,
+		.coherent_dma_mask = ~0		/* grumble */
+	}
+};
+
+static void __init capc7117_ide_init(void)
+{
+	platform_device_register(&capc7117_ide_device);
+}
+
+/* TI16C752 UART support */
+#define	TI16C752_FLAGS		(UPF_BOOT_AUTOCONF | \
+					UPF_IOREMAP | \
+					UPF_BUGGY_UART | \
+					UPF_SKIP_TEST)
+#define	TI16C752_UARTCLK	(22118400)
+static struct plat_serial8250_port ti16c752_platform_data[] = {
+	[0] = {
+	       .mapbase = 0x14000000,
+	       .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO78)),
+	       .irqflags = IRQF_TRIGGER_RISING,
+	       .flags = TI16C752_FLAGS,
+	       .iotype = UPIO_MEM,
+	       .regshift = 1,
+	       .uartclk = TI16C752_UARTCLK
+	},
+	[1] = {
+	       .mapbase = 0x14000040,
+	       .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO79)),
+	       .irqflags = IRQF_TRIGGER_RISING,
+	       .flags = TI16C752_FLAGS,
+	       .iotype = UPIO_MEM,
+	       .regshift = 1,
+	       .uartclk = TI16C752_UARTCLK
+	},
+	[2] = {
+	       .mapbase = 0x14000080,
+	       .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO80)),
+	       .irqflags = IRQF_TRIGGER_RISING,
+	       .flags = TI16C752_FLAGS,
+	       .iotype = UPIO_MEM,
+	       .regshift = 1,
+	       .uartclk = TI16C752_UARTCLK
+	},
+	[3] = {
+	       .mapbase = 0x140000c0,
+	       .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO81)),
+	       .irqflags = IRQF_TRIGGER_RISING,
+	       .flags = TI16C752_FLAGS,
+	       .iotype = UPIO_MEM,
+	       .regshift = 1,
+	       .uartclk = TI16C752_UARTCLK
+	},
+	[4] = {
+	       /* end of array */
+	}
+};
+
+static struct platform_device ti16c752_device = {
+	.name = "serial8250",
+	.id = PLAT8250_DEV_PLATFORM,
+	.dev = {
+		.platform_data = ti16c752_platform_data
+	}
+};
+
+static void __init capc7117_uarts_init(void)
+{
+	platform_device_register(&ti16c752_device);
+}
+
+static void __init capc7117_init(void)
+{
+	/* Init CoM */
+	mxm_8x10_barebones_init();
+
+	/* Init evaluation board peripherals */
+	mxm_8x10_ac97_init();
+	mxm_8x10_usb_host_init();
+	mxm_8x10_mmc_init();
+
+	capc7117_uarts_init();
+	capc7117_ide_init();
+}
+
+MACHINE_START(CAPC7117,
+	      "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM")
+	.phys_io = 0x40000000,
+	.boot_params = 0xa0000100,
+	.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io = pxa_map_io,
+	.init_irq = pxa3xx_init_irq,
+	.timer = &pxa_timer,
+	.init_machine = capc7117_init
+MACHINE_END
diff --git a/arch/arm/mach-pxa/cm-x255.c b/arch/arm/mach-pxa/cm-x255.c
index 253fd76142d6..f1a7703d771b 100644
--- a/arch/arm/mach-pxa/cm-x255.c
+++ b/arch/arm/mach-pxa/cm-x255.c
@@ -50,26 +50,7 @@ static unsigned long cmx255_pin_config[] = {
 	GPIO47_STUART_TXD,
 
 	/* LCD */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
+	GPIOxx_LCD_TFT_16BPP,
 
 	/* SSP1 */
 	GPIO23_SSP1_SCLK,
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index eea78b6c2bc5..a9926bb75922 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -71,26 +71,7 @@ static unsigned long cmx270_pin_config[] = {
 	GPIO111_MMC_DAT_3,
 
 	/* LCD */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
+	GPIOxx_LCD_TFT_16BPP,
 
 	/* I2C */
 	GPIO117_I2C_SCL,
@@ -195,33 +176,57 @@ static struct resource cmx270_2700G_resource[] = {
 	},
 };
 
-static unsigned long save_lcd_regs[10];
+static unsigned long cmx270_marathon_on[] = {
+	GPIO58_GPIO,
+	GPIO59_GPIO,
+	GPIO60_GPIO,
+	GPIO61_GPIO,
+	GPIO62_GPIO,
+	GPIO63_GPIO,
+	GPIO64_GPIO,
+	GPIO65_GPIO,
+	GPIO66_GPIO,
+	GPIO67_GPIO,
+	GPIO68_GPIO,
+	GPIO69_GPIO,
+	GPIO70_GPIO,
+	GPIO71_GPIO,
+	GPIO72_GPIO,
+	GPIO73_GPIO,
+	GPIO74_GPIO,
+	GPIO75_GPIO,
+	GPIO76_GPIO,
+	GPIO77_GPIO,
+};
+
+static unsigned long cmx270_marathon_off[] = {
+	GPIOxx_LCD_TFT_16BPP,
+};
 
 static int cmx270_marathon_probe(struct fb_info *fb)
 {
-	/* save PXA-270 pin settings before enabling 2700G */
-	save_lcd_regs[0] = GPDR1;
-	save_lcd_regs[1] = GPDR2;
-	save_lcd_regs[2] = GAFR1_U;
-	save_lcd_regs[3] = GAFR2_L;
-	save_lcd_regs[4] = GAFR2_U;
-
-	/* Disable PXA-270 on-chip controller driving pins */
-	GPDR1 &= ~(0xfc000000);
-	GPDR2 &= ~(0x00c03fff);
-	GAFR1_U &= ~(0xfff00000);
-	GAFR2_L &= ~(0x0fffffff);
-	GAFR2_U &= ~(0x0000f000);
+	int gpio, err;
+
+	for (gpio = 58; gpio <= 77; gpio++) {
+		err = gpio_request(gpio, "LCD");
+		if (err)
+			return err;
+		gpio_direction_input(gpio);
+	}
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_marathon_on));
 	return 0;
 }
 
 static int cmx270_marathon_remove(struct fb_info *fb)
 {
-	GPDR1 =   save_lcd_regs[0];
-	GPDR2 =   save_lcd_regs[1];
-	GAFR1_U = save_lcd_regs[2];
-	GAFR2_L = save_lcd_regs[3];
-	GAFR2_U = save_lcd_regs[4];
+	int gpio;
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_marathon_off));
+
+	for (gpio = 58; gpio <= 77; gpio++)
+		gpio_free(gpio);
+
 	return 0;
 }
 
diff --git a/arch/arm/mach-pxa/cm-x2xx-pci.c b/arch/arm/mach-pxa/cm-x2xx-pci.c
index 7873fa3d8fa4..161fc2d61207 100644
--- a/arch/arm/mach-pxa/cm-x2xx-pci.c
+++ b/arch/arm/mach-pxa/cm-x2xx-pci.c
@@ -59,7 +59,7 @@ void __init cmx2xx_pci_adjust_zones(int node, unsigned long *zone_size,
 static void cmx2xx_it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
 {
 	/* clear our parent irq */
-	GEDR(cmx2xx_it8152_irq_gpio) = GPIO_bit(cmx2xx_it8152_irq_gpio);
+	desc->chip->ack(irq);
 
 	it8152_irq_demux(irq, desc);
 }
diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c
index a5ee70735e04..1d9bc118ee32 100644
--- a/arch/arm/mach-pxa/corgi_ssp.c
+++ b/arch/arm/mach-pxa/corgi_ssp.c
@@ -204,7 +204,7 @@ void __init corgi_ssp_set_machinfo(struct corgissp_machinfo *machinfo)
 	ssp_machinfo = machinfo;
 }
 
-static int __init corgi_ssp_probe(struct platform_device *dev)
+static int __devinit corgi_ssp_probe(struct platform_device *dev)
 {
 	int ret;
 
diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c
index 94b23a9e3877..d578021d1a10 100644
--- a/arch/arm/mach-pxa/e740.c
+++ b/arch/arm/mach-pxa/e740.c
@@ -134,6 +134,12 @@ static unsigned long e740_pin_config[] __initdata = {
 	/* IrDA */
 	GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
 
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
 	/* Audio power control */
 	GPIO16_GPIO,  /* AC97 codec AVDD2 supply (analogue power) */
 	GPIO40_GPIO,  /* Mic amp power */
diff --git a/arch/arm/mach-pxa/e750.c b/arch/arm/mach-pxa/e750.c
index 5eccbce73a33..af83caa52dd4 100644
--- a/arch/arm/mach-pxa/e750.c
+++ b/arch/arm/mach-pxa/e750.c
@@ -132,6 +132,12 @@ static unsigned long e750_pin_config[] __initdata = {
 	/* IrDA */
 	GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
 
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
 	/* Audio power control */
 	GPIO4_GPIO,  /* Headphone amp power */
 	GPIO7_GPIO,  /* Speaker amp power */
diff --git a/arch/arm/mach-pxa/e800.c b/arch/arm/mach-pxa/e800.c
index aad129bed199..8ea97bf53fe1 100644
--- a/arch/arm/mach-pxa/e800.c
+++ b/arch/arm/mach-pxa/e800.c
@@ -35,6 +35,14 @@
 
 /* ------------------------ e800 LCD definitions ------------------------- */
 
+static unsigned long e800_pin_config[] __initdata = {
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+};
+
 static struct w100_gen_regs e800_lcd_regs = {
 	.lcd_format =            0x00008003,
 	.lcdd_cntl1 =            0x02a00000,
@@ -195,6 +203,7 @@ static struct platform_device *devices[] __initdata = {
 
 static void __init e800_init(void)
 {
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(e800_pin_config));
 	pxa_set_ffuart_info(NULL);
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index c8a01bc85fde..aab04f33e49b 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -109,26 +109,7 @@ static unsigned long common_pin_config[] = {
 	GPIO111_MMC_DAT_3,
 
 	/* LCD */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
+	GPIOxx_LCD_TFT_16BPP,
 
 	/* QCI */
 	GPIO84_CIF_FV,
diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
new file mode 100644
index 000000000000..771137fc1a82
--- /dev/null
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -0,0 +1,202 @@
+/*
+ * linux/arch/arm/mach-pxa/icontrol.c
+ *
+ * Support for the iControl and SafeTcam platforms from TMT Services
+ * using the Embedian MXM-8x10 Computer on Module
+ *
+ * Copyright (C) 2009 TMT Services & Supplies (Pty) Ltd.
+ *
+ * 2010-01-21 Hennie van der Merve <hvdmerwe@tmtservies.co.za>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/pxa320.h>
+#include <mach/mxm8x10.h>
+
+#include <linux/spi/spi.h>
+#include <mach/pxa2xx_spi.h>
+#include <linux/can/platform/mcp251x.h>
+
+#include "generic.h"
+
+#define ICONTROL_MCP251x_nCS1	(15)
+#define ICONTROL_MCP251x_nCS2	(16)
+#define ICONTROL_MCP251x_nCS3	(17)
+#define ICONTROL_MCP251x_nCS4	(24)
+
+#define ICONTROL_MCP251x_nIRQ1	(74)
+#define ICONTROL_MCP251x_nIRQ2	(75)
+#define ICONTROL_MCP251x_nIRQ3	(76)
+#define ICONTROL_MCP251x_nIRQ4	(77)
+
+static struct pxa2xx_spi_chip mcp251x_chip_info1 = {
+	.tx_threshold   = 8,
+	.rx_threshold   = 128,
+	.dma_burst_size = 8,
+	.timeout        = 235,
+	.gpio_cs        = ICONTROL_MCP251x_nCS1
+};
+
+static struct pxa2xx_spi_chip mcp251x_chip_info2 = {
+	.tx_threshold   = 8,
+	.rx_threshold   = 128,
+	.dma_burst_size = 8,
+	.timeout        = 235,
+	.gpio_cs        = ICONTROL_MCP251x_nCS2
+};
+
+static struct pxa2xx_spi_chip mcp251x_chip_info3 = {
+	.tx_threshold   = 8,
+	.rx_threshold   = 128,
+	.dma_burst_size = 8,
+	.timeout        = 235,
+	.gpio_cs        = ICONTROL_MCP251x_nCS3
+};
+
+static struct pxa2xx_spi_chip mcp251x_chip_info4 = {
+	.tx_threshold   = 8,
+	.rx_threshold   = 128,
+	.dma_burst_size = 8,
+	.timeout        = 235,
+	.gpio_cs        = ICONTROL_MCP251x_nCS4
+};
+
+static struct mcp251x_platform_data mcp251x_info = {
+	.oscillator_frequency = 16E6,
+	.model                = CAN_MCP251X_MCP2515,
+	.board_specific_setup = NULL,
+	.power_enable         = NULL,
+	.transceiver_enable   = NULL
+};
+
+static struct spi_board_info mcp251x_board_info[] = {
+	{
+		.modalias        = "mcp251x",
+		.max_speed_hz    = 6500000,
+		.bus_num         = 3,
+		.chip_select     = 0,
+		.platform_data   = &mcp251x_info,
+		.controller_data = &mcp251x_chip_info1,
+		.irq             = gpio_to_irq(ICONTROL_MCP251x_nIRQ1)
+	},
+	{
+		.modalias        = "mcp251x",
+		.max_speed_hz    = 6500000,
+		.bus_num         = 3,
+		.chip_select     = 1,
+		.platform_data   = &mcp251x_info,
+		.controller_data = &mcp251x_chip_info2,
+		.irq             = gpio_to_irq(ICONTROL_MCP251x_nIRQ2)
+	},
+	{
+		.modalias        = "mcp251x",
+		.max_speed_hz    = 6500000,
+		.bus_num         = 4,
+		.chip_select     = 0,
+		.platform_data   = &mcp251x_info,
+		.controller_data = &mcp251x_chip_info3,
+		.irq             = gpio_to_irq(ICONTROL_MCP251x_nIRQ3)
+	},
+	{
+		.modalias        = "mcp251x",
+		.max_speed_hz    = 6500000,
+		.bus_num         = 4,
+		.chip_select     = 1,
+		.platform_data   = &mcp251x_info,
+		.controller_data = &mcp251x_chip_info4,
+		.irq             = gpio_to_irq(ICONTROL_MCP251x_nIRQ4)
+	}
+};
+
+static struct pxa2xx_spi_master pxa_ssp3_spi_master_info = {
+	.clock_enable   = CKEN_SSP3,
+	.num_chipselect = 2,
+	.enable_dma     = 1
+};
+
+static struct pxa2xx_spi_master pxa_ssp4_spi_master_info = {
+	.clock_enable   = CKEN_SSP4,
+	.num_chipselect = 2,
+	.enable_dma     = 1
+};
+
+struct platform_device pxa_spi_ssp3 = {
+	.name          = "pxa2xx-spi",
+	.id            = 3,
+	.dev           = {
+		.platform_data = &pxa_ssp3_spi_master_info,
+	}
+};
+
+struct platform_device pxa_spi_ssp4 = {
+	.name          = "pxa2xx-spi",
+	.id            = 4,
+	.dev           = {
+		.platform_data = &pxa_ssp4_spi_master_info,
+	}
+};
+
+static struct platform_device *icontrol_spi_devices[] __initdata = {
+	&pxa_spi_ssp3,
+	&pxa_spi_ssp4,
+};
+
+static mfp_cfg_t mfp_can_cfg[] __initdata = {
+	/* CAN CS lines */
+	GPIO15_GPIO,
+	GPIO16_GPIO,
+	GPIO17_GPIO,
+	GPIO24_GPIO,
+
+	/* SPI (SSP3) lines */
+	GPIO89_SSP3_SCLK,
+	GPIO91_SSP3_TXD,
+	GPIO92_SSP3_RXD,
+
+	/* SPI (SSP4) lines */
+	GPIO93_SSP4_SCLK,
+	GPIO95_SSP4_TXD,
+	GPIO96_SSP4_RXD,
+
+	/* CAN nIRQ lines */
+	GPIO74_GPIO | MFP_LPM_EDGE_RISE,
+	GPIO75_GPIO | MFP_LPM_EDGE_RISE,
+	GPIO76_GPIO | MFP_LPM_EDGE_RISE,
+	GPIO77_GPIO | MFP_LPM_EDGE_RISE
+};
+
+static void __init icontrol_can_init(void)
+{
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(mfp_can_cfg));
+	platform_add_devices(ARRAY_AND_SIZE(icontrol_spi_devices));
+	spi_register_board_info(ARRAY_AND_SIZE(mcp251x_board_info));
+}
+
+static void __init icontrol_init(void)
+{
+	mxm_8x10_barebones_init();
+	mxm_8x10_usb_host_init();
+	mxm_8x10_mmc_init();
+
+	icontrol_can_init();
+}
+
+MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM")
+	.phys_io	= 0x40000000,
+	.boot_params	= 0xa0000100,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa3xx_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= icontrol_init
+MACHINE_END
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index 5c9e11d74f49..bc78c4dc0c66 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -47,25 +47,7 @@
 
 static unsigned long idp_pin_config[] __initdata = {
 	/* LCD */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
+	GPIOxx_LCD_DSTN_16BPP,
 
 	/* BTUART */
 	GPIO42_BTUART_RXD,
diff --git a/arch/arm/mach-pxa/imote2.c b/arch/arm/mach-pxa/imote2.c
index 5b0862df61ab..b2f878bd460b 100644
--- a/arch/arm/mach-pxa/imote2.c
+++ b/arch/arm/mach-pxa/imote2.c
@@ -64,7 +64,6 @@ static unsigned long imote2_pin_config[] __initdata = {
 	GPIO116_GPIO,			/* CC_CCA */
 	GPIO0_GPIO,			/* CC_FIFOP */
 	GPIO16_GPIO,			/* CCSFD */
-	GPIO39_GPIO,			/* CSn */
 	GPIO115_GPIO,			/* Power enable */
 
 	/* I2C */
@@ -72,7 +71,7 @@ static unsigned long imote2_pin_config[] __initdata = {
 	GPIO118_I2C_SDA,
 
 	/* SSP 3 - 802.15.4 radio */
-	GPIO39_GPIO, 			/* Chip Select */
+	GPIO39_GPIO,			/* Chip Select */
 	GPIO34_SSP3_SCLK,
 	GPIO35_SSP3_TXD,
 	GPIO41_SSP3_RXD,
diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h
index bfec09b1814b..1a741065045f 100644
--- a/arch/arm/mach-pxa/include/mach/balloon3.h
+++ b/arch/arm/mach-pxa/include/mach/balloon3.h
@@ -129,6 +129,16 @@ enum balloon3_features {
 #define CPLD_AROUTING_LOONR2INT_BIT    6
 #define CPLD_AROUTING_LOONR2EXT_BIT    7
 
+/* Balloon3 Interrupts */
+#define BALLOON3_IRQ(x)		(IRQ_BOARD_START + (x))
+
+#define BALLOON3_BP_CF_NRDY_IRQ	BALLOON3_IRQ(0)
+#define BALLOON3_BP_NSTSCHG_IRQ	BALLOON3_IRQ(1)
+
+#define BALLOON3_AUX_NIRQ	IRQ_GPIO(BALLOON3_GPIO_AUX_NIRQ)
+#define BALLOON3_CODEC_IRQ	IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ)
+#define BALLOON3_S0_CD_IRQ	IRQ_GPIO(BALLOON3_GPIO_S0_CD)
+
 extern int balloon3_has(enum balloon3_features feature);
 
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
index e741bf1bfb2d..7515757d6911 100644
--- a/arch/arm/mach-pxa/include/mach/hardware.h
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -314,7 +314,6 @@ extern unsigned long get_clock_tick_rate(void);
 #define PCIBIOS_MIN_IO		0
 #define PCIBIOS_MIN_MEM		0
 #define pcibios_assign_all_busses()	1
-#define HAVE_ARCH_PCI_SET_DMA_MASK	1
 #endif
 
 
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
index 3677a9af9c87..ffc8314520f2 100644
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -135,82 +135,6 @@
 #define IRQ_BOARD_END		(IRQ_BOARD_START + 16)
 #endif
 
-#define IRQ_SA1111_START	(IRQ_BOARD_END)
-#define IRQ_GPAIN0		(IRQ_BOARD_END + 0)
-#define IRQ_GPAIN1		(IRQ_BOARD_END + 1)
-#define IRQ_GPAIN2		(IRQ_BOARD_END + 2)
-#define IRQ_GPAIN3		(IRQ_BOARD_END + 3)
-#define IRQ_GPBIN0		(IRQ_BOARD_END + 4)
-#define IRQ_GPBIN1		(IRQ_BOARD_END + 5)
-#define IRQ_GPBIN2		(IRQ_BOARD_END + 6)
-#define IRQ_GPBIN3		(IRQ_BOARD_END + 7)
-#define IRQ_GPBIN4		(IRQ_BOARD_END + 8)
-#define IRQ_GPBIN5		(IRQ_BOARD_END + 9)
-#define IRQ_GPCIN0		(IRQ_BOARD_END + 10)
-#define IRQ_GPCIN1		(IRQ_BOARD_END + 11)
-#define IRQ_GPCIN2		(IRQ_BOARD_END + 12)
-#define IRQ_GPCIN3		(IRQ_BOARD_END + 13)
-#define IRQ_GPCIN4		(IRQ_BOARD_END + 14)
-#define IRQ_GPCIN5		(IRQ_BOARD_END + 15)
-#define IRQ_GPCIN6		(IRQ_BOARD_END + 16)
-#define IRQ_GPCIN7		(IRQ_BOARD_END + 17)
-#define IRQ_MSTXINT		(IRQ_BOARD_END + 18)
-#define IRQ_MSRXINT		(IRQ_BOARD_END + 19)
-#define IRQ_MSSTOPERRINT	(IRQ_BOARD_END + 20)
-#define IRQ_TPTXINT		(IRQ_BOARD_END + 21)
-#define IRQ_TPRXINT		(IRQ_BOARD_END + 22)
-#define IRQ_TPSTOPERRINT	(IRQ_BOARD_END + 23)
-#define SSPXMTINT		(IRQ_BOARD_END + 24)
-#define SSPRCVINT		(IRQ_BOARD_END + 25)
-#define SSPROR			(IRQ_BOARD_END + 26)
-#define AUDXMTDMADONEA		(IRQ_BOARD_END + 32)
-#define AUDRCVDMADONEA		(IRQ_BOARD_END + 33)
-#define AUDXMTDMADONEB		(IRQ_BOARD_END + 34)
-#define AUDRCVDMADONEB		(IRQ_BOARD_END + 35)
-#define AUDTFSR			(IRQ_BOARD_END + 36)
-#define AUDRFSR			(IRQ_BOARD_END + 37)
-#define AUDTUR			(IRQ_BOARD_END + 38)
-#define AUDROR			(IRQ_BOARD_END + 39)
-#define AUDDTS			(IRQ_BOARD_END + 40)
-#define AUDRDD			(IRQ_BOARD_END + 41)
-#define AUDSTO			(IRQ_BOARD_END + 42)
-#define IRQ_USBPWR		(IRQ_BOARD_END + 43)
-#define IRQ_HCIM		(IRQ_BOARD_END + 44)
-#define IRQ_HCIBUFFACC		(IRQ_BOARD_END + 45)
-#define IRQ_HCIRMTWKP		(IRQ_BOARD_END + 46)
-#define IRQ_NHCIMFCIR		(IRQ_BOARD_END + 47)
-#define IRQ_USB_PORT_RESUME	(IRQ_BOARD_END + 48)
-#define IRQ_S0_READY_NINT	(IRQ_BOARD_END + 49)
-#define IRQ_S1_READY_NINT	(IRQ_BOARD_END + 50)
-#define IRQ_S0_CD_VALID		(IRQ_BOARD_END + 51)
-#define IRQ_S1_CD_VALID		(IRQ_BOARD_END + 52)
-#define IRQ_S0_BVD1_STSCHG	(IRQ_BOARD_END + 53)
-#define IRQ_S1_BVD1_STSCHG	(IRQ_BOARD_END + 54)
-
-#define IRQ_LOCOMO_START	(IRQ_BOARD_END)
-#define IRQ_LOCOMO_KEY		(IRQ_BOARD_END + 0)
-#define IRQ_LOCOMO_GPIO0	(IRQ_BOARD_END + 1)
-#define IRQ_LOCOMO_GPIO1	(IRQ_BOARD_END + 2)
-#define IRQ_LOCOMO_GPIO2	(IRQ_BOARD_END + 3)
-#define IRQ_LOCOMO_GPIO3	(IRQ_BOARD_END + 4)
-#define IRQ_LOCOMO_GPIO4	(IRQ_BOARD_END + 5)
-#define IRQ_LOCOMO_GPIO5	(IRQ_BOARD_END + 6)
-#define IRQ_LOCOMO_GPIO6	(IRQ_BOARD_END + 7)
-#define IRQ_LOCOMO_GPIO7	(IRQ_BOARD_END + 8)
-#define IRQ_LOCOMO_GPIO8	(IRQ_BOARD_END + 9)
-#define IRQ_LOCOMO_GPIO9	(IRQ_BOARD_END + 10)
-#define IRQ_LOCOMO_GPIO10	(IRQ_BOARD_END + 11)
-#define IRQ_LOCOMO_GPIO11	(IRQ_BOARD_END + 12)
-#define IRQ_LOCOMO_GPIO12	(IRQ_BOARD_END + 13)
-#define IRQ_LOCOMO_GPIO13	(IRQ_BOARD_END + 14)
-#define IRQ_LOCOMO_GPIO14	(IRQ_BOARD_END + 15)
-#define IRQ_LOCOMO_GPIO15	(IRQ_BOARD_END + 16)
-#define IRQ_LOCOMO_LT		(IRQ_BOARD_END + 17)
-#define IRQ_LOCOMO_SPI_RFR	(IRQ_BOARD_END + 18)
-#define IRQ_LOCOMO_SPI_RFW	(IRQ_BOARD_END + 19)
-#define IRQ_LOCOMO_SPI_OVRN	(IRQ_BOARD_END + 20)
-#define IRQ_LOCOMO_SPI_TEND	(IRQ_BOARD_END + 21)
-
 /*
  * Figure out the MAX IRQ number.
  *
@@ -219,89 +143,16 @@
  * Otherwise, we have the standard IRQs only.
  */
 #ifdef CONFIG_SA1111
-#define NR_IRQS			(IRQ_S1_BVD1_STSCHG + 1)
-#elif defined(CONFIG_SHARP_LOCOMO)
-#define NR_IRQS			(IRQ_LOCOMO_SPI_TEND + 1)
+#define NR_IRQS			(IRQ_BOARD_END + 55)
 #elif defined(CONFIG_PXA_HAVE_BOARD_IRQS)
 #define NR_IRQS			(IRQ_BOARD_END)
 #else
 #define NR_IRQS			(IRQ_BOARD_START)
 #endif
 
-/*
- * Board specific IRQs.  Define them here.
- * Do not surround them with ifdefs.
- */
-#define LUBBOCK_IRQ(x)		(IRQ_BOARD_START + (x))
-#define LUBBOCK_SD_IRQ		LUBBOCK_IRQ(0)
-#define LUBBOCK_SA1111_IRQ	LUBBOCK_IRQ(1)
-#define LUBBOCK_USB_IRQ		LUBBOCK_IRQ(2)  /* usb connect */
-#define LUBBOCK_ETH_IRQ		LUBBOCK_IRQ(3)
-#define LUBBOCK_UCB1400_IRQ	LUBBOCK_IRQ(4)
-#define LUBBOCK_BB_IRQ		LUBBOCK_IRQ(5)
-#define LUBBOCK_USB_DISC_IRQ	LUBBOCK_IRQ(6)  /* usb disconnect */
-#define LUBBOCK_LAST_IRQ	LUBBOCK_IRQ(6)
-
-#define LPD270_IRQ(x)		(IRQ_BOARD_START + (x))
-#define LPD270_USBC_IRQ		LPD270_IRQ(2)
-#define LPD270_ETHERNET_IRQ	LPD270_IRQ(3)
-#define LPD270_AC97_IRQ		LPD270_IRQ(4)
-
-#define MAINSTONE_IRQ(x)	(IRQ_BOARD_START + (x))
-#define MAINSTONE_MMC_IRQ	MAINSTONE_IRQ(0)
-#define MAINSTONE_USIM_IRQ	MAINSTONE_IRQ(1)
-#define MAINSTONE_USBC_IRQ	MAINSTONE_IRQ(2)
-#define MAINSTONE_ETHERNET_IRQ	MAINSTONE_IRQ(3)
-#define MAINSTONE_AC97_IRQ	MAINSTONE_IRQ(4)
-#define MAINSTONE_PEN_IRQ	MAINSTONE_IRQ(5)
-#define MAINSTONE_MSINS_IRQ	MAINSTONE_IRQ(6)
-#define MAINSTONE_EXBRD_IRQ	MAINSTONE_IRQ(7)
-#define MAINSTONE_S0_CD_IRQ	MAINSTONE_IRQ(9)
-#define MAINSTONE_S0_STSCHG_IRQ	MAINSTONE_IRQ(10)
-#define MAINSTONE_S0_IRQ	MAINSTONE_IRQ(11)
-#define MAINSTONE_S1_CD_IRQ	MAINSTONE_IRQ(13)
-#define MAINSTONE_S1_STSCHG_IRQ	MAINSTONE_IRQ(14)
-#define MAINSTONE_S1_IRQ	MAINSTONE_IRQ(15)
-
-/* Balloon3 Interrupts */
-#define BALLOON3_IRQ(x)		(IRQ_BOARD_START + (x))
-
-#define BALLOON3_BP_CF_NRDY_IRQ	BALLOON3_IRQ(0)
-#define BALLOON3_BP_NSTSCHG_IRQ	BALLOON3_IRQ(1)
-
-#define BALLOON3_AUX_NIRQ	IRQ_GPIO(BALLOON3_GPIO_AUX_NIRQ)
-#define BALLOON3_CODEC_IRQ	IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ)
-#define BALLOON3_S0_CD_IRQ	IRQ_GPIO(BALLOON3_GPIO_S0_CD)
-
-/* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */
-#define IRQ_LOCOMO_KEY_BASE	(IRQ_BOARD_START + 0)
-#define IRQ_LOCOMO_GPIO_BASE	(IRQ_BOARD_START + 1)
-#define IRQ_LOCOMO_LT_BASE	(IRQ_BOARD_START + 2)
-#define IRQ_LOCOMO_SPI_BASE	(IRQ_BOARD_START + 3)
-
-/* phyCORE-PXA270 (PCM027) Interrupts */
-#define PCM027_IRQ(x)          (IRQ_BOARD_START + (x))
-#define PCM027_BTDET_IRQ       PCM027_IRQ(0)
-#define PCM027_FF_RI_IRQ       PCM027_IRQ(1)
-#define PCM027_MMCDET_IRQ      PCM027_IRQ(2)
-#define PCM027_PM_5V_IRQ       PCM027_IRQ(3)
-
-/* ITE8152 irqs */
 /* add IT8152 IRQs beyond BOARD_END */
 #ifdef CONFIG_PCI_HOST_ITE8152
-#define IT8152_IRQ(x)   (IRQ_BOARD_END + (x))
-
-/* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */
-#define IT8152_LD_IRQ_COUNT     9
-#define IT8152_LP_IRQ_COUNT     16
-#define IT8152_PD_IRQ_COUNT     15
-
-/* Priorities: */
-#define IT8152_PD_IRQ(i)        IT8152_IRQ(i)
-#define IT8152_LP_IRQ(i)        (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT)
-#define IT8152_LD_IRQ(i)        (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT + IT8152_LP_IRQ_COUNT)
-
-#define IT8152_LAST_IRQ         IT8152_LD_IRQ(IT8152_LD_IRQ_COUNT - 1)
+#define IT8152_LAST_IRQ         (IRQ_BOARD_END + 40)
 
 #if NR_IRQS < (IT8152_LAST_IRQ+1)
 #undef NR_IRQS
diff --git a/arch/arm/mach-pxa/include/mach/lpd270.h b/arch/arm/mach-pxa/include/mach/lpd270.h
index f89fb715266b..0e6440c81683 100644
--- a/arch/arm/mach-pxa/include/mach/lpd270.h
+++ b/arch/arm/mach-pxa/include/mach/lpd270.h
@@ -34,5 +34,9 @@
 #define LPD270_INT_ETHERNET	(1 << 3)  /* Ethernet controller IRQ */
 #define LPD270_INT_USBC		(1 << 2)  /* USB client cable detection IRQ */
 
+#define LPD270_IRQ(x)		(IRQ_BOARD_START + (x))
+#define LPD270_USBC_IRQ		LPD270_IRQ(2)
+#define LPD270_ETHERNET_IRQ	LPD270_IRQ(3)
+#define LPD270_AC97_IRQ		LPD270_IRQ(4)
 
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/lubbock.h b/arch/arm/mach-pxa/include/mach/lubbock.h
index 751b74811d0f..a0d4247f08fc 100644
--- a/arch/arm/mach-pxa/include/mach/lubbock.h
+++ b/arch/arm/mach-pxa/include/mach/lubbock.h
@@ -34,6 +34,17 @@
 #define LUB_IRQ_SET_CLR		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x0d0)
 #define LUB_GP			__LUB_REG(LUBBOCK_FPGA_PHYS + 0x100)
 
+/* Board specific IRQs */
+#define LUBBOCK_IRQ(x)		(IRQ_BOARD_START + (x))
+#define LUBBOCK_SD_IRQ		LUBBOCK_IRQ(0)
+#define LUBBOCK_SA1111_IRQ	LUBBOCK_IRQ(1)
+#define LUBBOCK_USB_IRQ		LUBBOCK_IRQ(2)  /* usb connect */
+#define LUBBOCK_ETH_IRQ		LUBBOCK_IRQ(3)
+#define LUBBOCK_UCB1400_IRQ	LUBBOCK_IRQ(4)
+#define LUBBOCK_BB_IRQ		LUBBOCK_IRQ(5)
+#define LUBBOCK_USB_DISC_IRQ	LUBBOCK_IRQ(6)  /* usb disconnect */
+#define LUBBOCK_LAST_IRQ	LUBBOCK_IRQ(6)
+
 #ifndef __ASSEMBLY__
 extern void lubbock_set_misc_wr(unsigned int mask, unsigned int set);
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/mainstone.h b/arch/arm/mach-pxa/include/mach/mainstone.h
index 3461c4302ff4..86e623abd64d 100644
--- a/arch/arm/mach-pxa/include/mach/mainstone.h
+++ b/arch/arm/mach-pxa/include/mach/mainstone.h
@@ -117,4 +117,21 @@
 #define MST_PCMCIA_PWR_VCC_33   0x8	   /* voltage VCC = 3.3V */
 #define MST_PCMCIA_PWR_VCC_50   0x4	   /* voltage VCC = 5.0V */
 
+/* board specific IRQs */
+#define MAINSTONE_IRQ(x)	(IRQ_BOARD_START + (x))
+#define MAINSTONE_MMC_IRQ	MAINSTONE_IRQ(0)
+#define MAINSTONE_USIM_IRQ	MAINSTONE_IRQ(1)
+#define MAINSTONE_USBC_IRQ	MAINSTONE_IRQ(2)
+#define MAINSTONE_ETHERNET_IRQ	MAINSTONE_IRQ(3)
+#define MAINSTONE_AC97_IRQ	MAINSTONE_IRQ(4)
+#define MAINSTONE_PEN_IRQ	MAINSTONE_IRQ(5)
+#define MAINSTONE_MSINS_IRQ	MAINSTONE_IRQ(6)
+#define MAINSTONE_EXBRD_IRQ	MAINSTONE_IRQ(7)
+#define MAINSTONE_S0_CD_IRQ	MAINSTONE_IRQ(9)
+#define MAINSTONE_S0_STSCHG_IRQ	MAINSTONE_IRQ(10)
+#define MAINSTONE_S0_IRQ	MAINSTONE_IRQ(11)
+#define MAINSTONE_S1_CD_IRQ	MAINSTONE_IRQ(13)
+#define MAINSTONE_S1_STSCHG_IRQ	MAINSTONE_IRQ(14)
+#define MAINSTONE_S1_IRQ	MAINSTONE_IRQ(15)
+
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
index 9c787855cf24..cafadc33dfd8 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
@@ -190,4 +190,36 @@
 #define GPIO89_AC97_nRESET	MFP_CFG_OUT(GPIO89, AF0, DRIVE_HIGH)
 #endif	/* CONFIG_CPU_PXA26x */
 
+/* commonly used pin configurations */
+#define GPIOxx_LCD_16BPP	\
+	GPIO58_LCD_LDD_0,	\
+	GPIO59_LCD_LDD_1,	\
+	GPIO60_LCD_LDD_2,	\
+	GPIO61_LCD_LDD_3,	\
+	GPIO62_LCD_LDD_4,	\
+	GPIO63_LCD_LDD_5,	\
+	GPIO64_LCD_LDD_6,	\
+	GPIO65_LCD_LDD_7,	\
+	GPIO66_LCD_LDD_8,	\
+	GPIO67_LCD_LDD_9,	\
+	GPIO68_LCD_LDD_10,	\
+	GPIO69_LCD_LDD_11,	\
+	GPIO70_LCD_LDD_12,	\
+	GPIO71_LCD_LDD_13,	\
+	GPIO72_LCD_LDD_14,	\
+	GPIO73_LCD_LDD_15
+
+#define GPIOxx_LCD_DSTN_16BPP	\
+	GPIOxx_LCD_16BPP,	\
+	GPIO74_LCD_FCLK,	\
+	GPIO75_LCD_LCLK,	\
+	GPIO76_LCD_PCLK
+
+#define GPIOxx_LCD_TFT_16BPP	\
+	GPIOxx_LCD_16BPP,	\
+	GPIO74_LCD_FCLK,	\
+	GPIO75_LCD_LCLK,	\
+	GPIO76_LCD_PCLK,	\
+	GPIO77_LCD_BIAS
+
 #endif /* __ASM_ARCH_MFP_PXA25X_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
index 6543c05f47ed..ec0f0b0b6744 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
@@ -434,5 +434,32 @@
 #define GPIO112_nMSINS		MFP_CFG_IN(GPIO112, AF2)
 #define GPIO32_MSSCLK		MFP_CFG_OUT(GPIO32, AF1, DRIVE_LOW)
 
+/* commonly used pin configurations */
+#define GPIOxx_LCD_16BPP	\
+	GPIO58_LCD_LDD_0,	\
+	GPIO59_LCD_LDD_1,	\
+	GPIO60_LCD_LDD_2,	\
+	GPIO61_LCD_LDD_3,	\
+	GPIO62_LCD_LDD_4,	\
+	GPIO63_LCD_LDD_5,	\
+	GPIO64_LCD_LDD_6,	\
+	GPIO65_LCD_LDD_7,	\
+	GPIO66_LCD_LDD_8,	\
+	GPIO67_LCD_LDD_9,	\
+	GPIO68_LCD_LDD_10,	\
+	GPIO69_LCD_LDD_11,	\
+	GPIO70_LCD_LDD_12,	\
+	GPIO71_LCD_LDD_13,	\
+	GPIO72_LCD_LDD_14,	\
+	GPIO73_LCD_LDD_15
+
+#define GPIOxx_LCD_TFT_16BPP	\
+	GPIOxx_LCD_16BPP,	\
+	GPIO74_LCD_FCLK,	\
+	GPIO75_LCD_LCLK,	\
+	GPIO76_LCD_PCLK,	\
+	GPIO77_LCD_BIAS
+
+
 extern int keypad_set_wake(unsigned int on);
 #endif /* __ASM_ARCH_MFP_PXA27X_H */
diff --git a/arch/arm/mach-pxa/include/mach/mxm8x10.h b/arch/arm/mach-pxa/include/mach/mxm8x10.h
new file mode 100644
index 000000000000..ffa15665a418
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mxm8x10.h
@@ -0,0 +1,21 @@
+#ifndef __MACH_MXM_8X10_H
+#define __MACH_MXM_8X10_H
+
+#define MXM_8X10_ETH_PHYS	0x13000000
+
+#if defined(CONFIG_MMC)
+
+#define MXM_8X10_SD_nCD (72)
+#define MXM_8X10_SD_WP (84)
+
+extern void mxm_8x10_mmc_init(void);
+#else
+static inline void mxm_8x10_mmc_init(void) {}
+#endif
+
+extern void mxm_8x10_usb_host_init(void);
+extern void mxm_8x10_ac97_init(void);
+
+extern void mxm_8x10_barebones_init(void);
+
+#endif /* __MACH_MXM_8X10_H */
diff --git a/arch/arm/mach-pxa/include/mach/pcm027.h b/arch/arm/mach-pxa/include/mach/pcm027.h
index 4dcd2e8baa61..04083263167e 100644
--- a/arch/arm/mach-pxa/include/mach/pcm027.h
+++ b/arch/arm/mach-pxa/include/mach/pcm027.h
@@ -23,6 +23,13 @@
  * Definitions of CPU card resources only
  */
 
+/* phyCORE-PXA270 (PCM027) Interrupts */
+#define PCM027_IRQ(x)          (IRQ_BOARD_START + (x))
+#define PCM027_BTDET_IRQ       PCM027_IRQ(0)
+#define PCM027_FF_RI_IRQ       PCM027_IRQ(1)
+#define PCM027_MMCDET_IRQ      PCM027_IRQ(2)
+#define PCM027_PM_5V_IRQ       PCM027_IRQ(3)
+
 /* I2C RTC */
 #define PCM027_RTC_IRQ_GPIO	0
 #define PCM027_RTC_IRQ		IRQ_GPIO(PCM027_RTC_IRQ_GPIO)
diff --git a/arch/arm/mach-pxa/include/mach/ssp.h b/arch/arm/mach-pxa/include/mach/ssp.h
index cb5cb766f0f1..be1be5b6db51 100644
--- a/arch/arm/mach-pxa/include/mach/ssp.h
+++ b/arch/arm/mach-pxa/include/mach/ssp.h
@@ -46,6 +46,7 @@ struct ssp_device {
 	int		drcmr_tx;
 };
 
+#ifdef CONFIG_PXA_SSP_LEGACY
 /*
  * SSP initialisation flags
  */
@@ -78,6 +79,7 @@ void ssp_restore_state(struct ssp_dev *dev, struct ssp_state *ssp);
 int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags);
 int ssp_config(struct ssp_dev *dev, u32 mode, u32 flags, u32 psp_flags, u32 speed);
 void ssp_exit(struct ssp_dev *dev);
+#endif /* CONFIG_PXA_SSP_LEGACY */
 
 /**
  * ssp_write_reg - Write to a SSP register
diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h
index 237734b5b1be..5ef91d9d17e4 100644
--- a/arch/arm/mach-pxa/include/mach/uncompress.h
+++ b/arch/arm/mach-pxa/include/mach/uncompress.h
@@ -10,20 +10,41 @@
  */
 
 #include <linux/serial_reg.h>
-#include <mach/regs-uart.h>
 #include <asm/mach-types.h>
 
-#define __REG(x)       ((volatile unsigned long *)x)
+#define FFUART_BASE	(0x40100000)
+#define BTUART_BASE	(0x40200000)
+#define STUART_BASE	(0x40700000)
 
-static volatile unsigned long *UART = FFUART;
+static unsigned long uart_base = FFUART_BASE;
+static unsigned int uart_shift = 2;
+static unsigned int uart_is_pxa = 1;
+
+static inline unsigned char uart_read(int offset)
+{
+	return *(volatile unsigned char *)(uart_base + (offset << uart_shift));
+}
+
+static inline void uart_write(unsigned char val, int offset)
+{
+	*(volatile unsigned char *)(uart_base + (offset << uart_shift)) = val;
+}
+
+static inline int uart_is_enabled(void)
+{
+	/* assume enabled by default for non-PXA uarts */
+	return uart_is_pxa ? uart_read(UART_IER) & UART_IER_UUE : 1;
+}
 
 static inline void putc(char c)
 {
-	if (!(UART[UART_IER] & IER_UUE))
+	if (!uart_is_enabled())
 		return;
-	while (!(UART[UART_LSR] & LSR_TDRQ))
+
+	while (!(uart_read(UART_LSR) & UART_LSR_THRE))
 		barrier();
-	UART[UART_TX] = c;
+
+	uart_write(c, UART_TX);
 }
 
 /*
@@ -38,7 +59,13 @@ static inline void arch_decomp_setup(void)
 	if (machine_is_littleton() || machine_is_intelmote2()
 	    || machine_is_csb726() || machine_is_stargate2()
 	    || machine_is_cm_x300() || machine_is_balloon3())
-		UART = STUART;
+		uart_base = STUART_BASE;
+
+	if (machine_is_arcom_zeus()) {
+		uart_base = 0x10000000;	/* nCS4 */
+		uart_shift = 1;
+		uart_is_pxa = 0;
+	}
 }
 
 /*
diff --git a/arch/arm/mach-pxa/include/mach/zeus.h b/arch/arm/mach-pxa/include/mach/zeus.h
index c387046d2f28..6e119976003e 100644
--- a/arch/arm/mach-pxa/include/mach/zeus.h
+++ b/arch/arm/mach-pxa/include/mach/zeus.h
@@ -58,6 +58,8 @@
 #define ZEUS_EXT1_GPIO(x)	(ZEUS_EXT1_GPIO_BASE + (x))
 #define ZEUS_USER_GPIO(x)	(ZEUS_USER_GPIO_BASE + (x))
 
+#define	ZEUS_CAN_SHDN_GPIO	ZEUS_EXT1_GPIO(2)
+
 /*
  * CPLD registers:
  * Only 4 registers, but spreaded over a 32MB address space.
@@ -68,7 +70,6 @@
 #define ZEUS_CPLD_VERSION	(ZEUS_CPLD + 0x0000)
 #define ZEUS_CPLD_ISA_IRQ	(ZEUS_CPLD + 0x1000)
 #define ZEUS_CPLD_CONTROL	(ZEUS_CPLD + 0x2000)
-#define ZEUS_CPLD_EXTWDOG	(ZEUS_CPLD + 0x3000)
 
 /* CPLD register bits */
 #define ZEUS_CPLD_CONTROL_CF_RST        0x01
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index 1373c22dbb83..d279507fc748 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -83,6 +83,10 @@ static unsigned long lpd270_pin_config[] __initdata = {
 	GPIO89_USBH1_PEN,
 
 	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
 	GPIO45_AC97_SYSCLK,
 
 	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
@@ -121,7 +125,7 @@ static void lpd270_irq_handler(unsigned int irq, struct irq_desc *desc)
 
 	pending = __raw_readw(LPD270_INT_STATUS) & lpd270_irq_enabled;
 	do {
-		GEDR(0) = GPIO_bit(0);  /* clear useless edge notification */
+		desc->chip->ack(irq);	/* clear useless edge notification */
 		if (likely(pending)) {
 			irq = LPD270_IRQ(0) + __ffs(pending);
 			generic_handle_irq(irq);
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 98ee7e590299..63d65a2a0387 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -66,26 +66,14 @@ static unsigned long lubbock_pin_config[] __initdata = {
 	GPIO25_SSP1_TXD,
 	GPIO26_SSP1_RXD,
 
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
 	/* LCD - 16bpp DSTN */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
+	GPIOxx_LCD_DSTN_16BPP,
 
 	/* BTUART */
 	GPIO42_BTUART_RXD,
@@ -158,7 +146,7 @@ static void lubbock_irq_handler(unsigned int irq, struct irq_desc *desc)
 {
 	unsigned long pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
 	do {
-		GEDR(0) = GPIO_bit(0);	/* clear our parent irq */
+		desc->chip->ack(irq);	/* clear our parent irq */
 		if (likely(pending)) {
 			irq = LUBBOCK_IRQ(0) + __ffs(pending);
 			generic_handle_irq(irq);
@@ -240,11 +228,18 @@ static struct resource sa1111_resources[] = {
 	},
 };
 
+static struct sa1111_platform_data sa1111_info = {
+	.irq_base	= IRQ_BOARD_END,
+};
+
 static struct platform_device sa1111_device = {
 	.name		= "sa1111",
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(sa1111_resources),
 	.resource	= sa1111_resources,
+	.dev		= {
+		.platform_data	= &sa1111_info,
+	},
 };
 
 /* ADS7846 is connected through SSP ... and if your board has J5 populated,
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 189f330719a2..e81dd0c8e40d 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -88,26 +88,7 @@ static unsigned long magician_pin_config[] __initdata = {
 	GPIO112_MMC_CMD,
 
 	/* LCD */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
+	GPIOxx_LCD_TFT_16BPP,
 
 	/* QCI */
 	GPIO12_CIF_DD_7,
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 851ee0fc32e2..5543c64da9ef 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -60,26 +60,7 @@ static unsigned long mainstone_pin_config[] = {
 	GPIO15_nCS_1,
 
 	/* LCD - 16bpp Active TFT */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
+	GPIOxx_LCD_TFT_16BPP,
 	GPIO16_PWM0_OUT,	/* Backlight */
 
 	/* MMC */
@@ -107,6 +88,10 @@ static unsigned long mainstone_pin_config[] = {
 	GPIO57_nIOIS16,
 
 	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
 	GPIO45_AC97_SYSCLK,
 
 	/* Keypad */
@@ -162,7 +147,7 @@ static void mainstone_irq_handler(unsigned int irq, struct irq_desc *desc)
 {
 	unsigned long pending = MST_INTSETCLR & mainstone_irq_enabled;
 	do {
-		GEDR(0) = GPIO_bit(0);  /* clear useless edge notification */
+		desc->chip->ack(irq);	/* clear useless edge notification */
 		if (likely(pending)) {
 			irq = MAINSTONE_IRQ(0) + __ffs(pending);
 			generic_handle_irq(irq);
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 2466a44d8fda..843fcca76e26 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -86,25 +86,7 @@ static unsigned long mioa701_pin_config[] = {
 	MIO_CFG_OUT(GPIO22_USB_ENABLE, AF0, DRIVE_LOW),
 
 	/* LCD */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
+	GPIOxx_LCD_TFT_16BPP,
 
 	/* QCI */
 	GPIO12_CIF_DD_7,
@@ -155,6 +137,10 @@ static unsigned long mioa701_pin_config[] = {
 	GPIO41_FFUART_RTS,
 
 	/* Sound */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
 	GPIO89_AC97_SYSCLK,
 	MIO_CFG_IN(GPIO12_HPJACK_INSERT, AF0),
 
diff --git a/arch/arm/mach-pxa/mxm8x10.c b/arch/arm/mach-pxa/mxm8x10.c
new file mode 100644
index 000000000000..8c9c6f0d56bb
--- /dev/null
+++ b/arch/arm/mach-pxa/mxm8x10.c
@@ -0,0 +1,474 @@
+/*
+ * linux/arch/arm/mach-pxa/mxm8x10.c
+ *
+ * Support for the Embedian MXM-8x10 Computer on Module
+ *
+ * Copyright (C) 2006 Marvell International Ltd.
+ * Copyright (C) 2009 Embedian Inc.
+ * Copyright (C) 2009 TMT Services & Supplies (Pty) Ltd.
+ *
+ * 2007-09-04: eric miao <eric.y.miao@gmail.com>
+ *             rewrite to align with latest kernel
+ *
+ * 2010-01-09: Edwin Peer <epeer@tmtservices.co.za>
+ * 	       Hennie van der Merwe <hvdmerwe@tmtservices.co.za>
+ *             rework for upstream merge
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/serial_8250.h>
+#include <linux/dm9000.h>
+#include <linux/gpio.h>
+
+#include <plat/i2c.h>
+#include <plat/pxa3xx_nand.h>
+
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/pxa320.h>
+
+#include <mach/mxm8x10.h>
+
+#include "devices.h"
+#include "generic.h"
+
+/* GPIO pin definition
+
+External device stuff   - Leave unconfigured for now...
+---------------------
+GPIO0   -   DREQ    (External DMA Request)
+GPIO3   -   nGCS2   (External Chip Select) Where is nGCS0; nGCS1; nGCS4; nGCS5 ?
+GPIO4   -   nGCS3
+GPIO15  -   EXT_GPIO1
+GPIO16  -   EXT_GPIO2
+GPIO17  -   EXT_GPIO3
+GPIO24  -   EXT_GPIO4
+GPIO25  -   EXT_GPIO5
+GPIO26  -   EXT_GPIO6
+GPIO27  -   EXT_GPIO7
+GPIO28  -   EXT_GPIO8
+GPIO29  -   EXT_GPIO9
+GPIO30  -   EXT_GPIO10
+GPIO31  -   EXT_GPIO11
+GPIO57  -   EXT_GPIO12
+GPIO74  -   EXT_IRQ1
+GPIO75  -   EXT_IRQ2
+GPIO76  -   EXT_IRQ3
+GPIO77  -   EXT_IRQ4
+GPIO78  -   EXT_IRQ5
+GPIO79  -   EXT_IRQ6
+GPIO80  -   EXT_IRQ7
+GPIO81  -   EXT_IRQ8
+GPIO87  -   VCCIO_PWREN (External Device PWREN)
+
+Dallas 1-Wire   - Leave unconfigured for now...
+-------------
+GPIO0_2 -   DS - 1Wire
+
+Ethernet
+--------
+GPIO1   -   DM9000 PWR
+GPIO9   -   DM9K_nIRQ
+GPIO36  -   DM9K_RESET
+
+Keypad  - Leave unconfigured by for now...
+------
+GPIO1_2 -   KP_DKIN0
+GPIO5_2 -   KP_MKOUT7
+GPIO82  -   KP_DKIN1
+GPIO85  -   KP_DKIN2
+GPIO86  -   KP_DKIN3
+GPIO113 -   KP_MKIN0
+GPIO114 -   KP_MKIN1
+GPIO115 -   KP_MKIN2
+GPIO116 -   KP_MKIN3
+GPIO117 -   KP_MKIN4
+GPIO118 -   KP_MKIN5
+GPIO119 -   KP_MKIN6
+GPIO120 -   KP_MKIN7
+GPIO121 -   KP_MKOUT0
+GPIO122 -   KP_MKOUT1
+GPIO122 -   KP_MKOUT2
+GPIO123 -   KP_MKOUT3
+GPIO124 -   KP_MKOUT4
+GPIO125 -   KP_MKOUT5
+GPIO127 -   KP_MKOUT6
+
+Data Bus    - Leave unconfigured for now...
+--------
+GPIO2   -   nWait (Data Bus)
+
+USB Device
+----------
+GPIO4_2 -   USBD_PULLUP
+GPIO10  -   UTM_CLK (USB Device UTM Clk)
+GPIO49  -   USB 2.0 Device UTM_DATA0
+GPIO50  -   USB 2.0 Device UTM_DATA1
+GPIO51  -   USB 2.0 Device UTM_DATA2
+GPIO52  -   USB 2.0 Device UTM_DATA3
+GPIO53  -   USB 2.0 Device UTM_DATA4
+GPIO54  -   USB 2.0 Device UTM_DATA5
+GPIO55  -   USB 2.0 Device UTM_DATA6
+GPIO56  -   USB 2.0 Device UTM_DATA7
+GPIO58  -   UTM_RXVALID (USB 2.0 Device)
+GPIO59  -   UTM_RXACTIVE (USB 2.0 Device)
+GPIO60  -   UTM_RXERROR
+GPIO61  -   UTM_OPMODE0
+GPIO62  -   UTM_OPMODE1
+GPIO71  -   USBD_INT    (USB Device?)
+GPIO73  -   UTM_TXREADY (USB 2.0 Device)
+GPIO83  -   UTM_TXVALID (USB 2.0 Device)
+GPIO98  -   UTM_RESET   (USB 2.0 device)
+GPIO99  -   UTM_XCVR_SELECT
+GPIO100 -   UTM_TERM_SELECT
+GPIO101 -   UTM_SUSPENDM_X
+GPIO102 -   UTM_LINESTATE0
+GPIO103 -   UTM_LINESTATE1
+
+Card-Bus Interface  - Leave unconfigured for now...
+------------------
+GPIO5   -   nPIOR (I/O space output enable)
+GPIO6   -   nPIOW (I/O space write enable)
+GPIO7   -   nIOS16 (Input from I/O space telling size of data bus)
+GPIO8   -   nPWAIT (Input for inserting wait states)
+
+LCD
+---
+GPIO6_2     -   LDD0
+GPIO7_2     -   LDD1
+GPIO8_2     -   LDD2
+GPIO9_2     -   LDD3
+GPIO11_2    -   LDD5
+GPIO12_2    -   LDD6
+GPIO13_2    -   LDD7
+GPIO14_2    -   VSYNC
+GPIO15_2    -   HSYNC
+GPIO16_2    -   VCLK
+GPIO17_2    -   HCLK
+GPIO18_2    -   VDEN
+GPIO63      -   LDD8    (CPU LCD)
+GPIO64      -   LDD9    (CPU LCD)
+GPIO65      -   LDD10   (CPU LCD)
+GPIO66      -   LDD11   (CPU LCD)
+GPIO67      -   LDD12   (CPU LCD)
+GPIO68      -   LDD13   (CPU LCD)
+GPIO69      -   LDD14   (CPU LCD)
+GPIO70      -   LDD15   (CPU LCD)
+GPIO88      -   VCCLCD_PWREN (LCD Panel PWREN)
+GPIO97      -   BACKLIGHT_EN
+GPIO104     -   LCD_PWREN
+
+PWM   - Leave unconfigured for now...
+---
+GPIO11  -   PWM0
+GPIO12  -   PWM1
+GPIO13  -   PWM2
+GPIO14  -   PWM3
+
+SD-CARD
+-------
+GPIO18  -   SDDATA0
+GPIO19  -   SDDATA1
+GPIO20  -   SDDATA2
+GPIO21  -   SDDATA3
+GPIO22  -   SDCLK
+GPIO23  -   SDCMD
+GPIO72  -   SD_WP
+GPIO84  -   SD_nIRQ_CD  (SD-Card)
+
+I2C
+---
+GPIO32  -   I2CSCL
+GPIO33  -   I2CSDA
+
+AC97
+----
+GPIO35  -   AC97_SDATA_IN
+GPIO37  -   AC97_SDATA_OUT
+GPIO38  -   AC97_SYNC
+GPIO39  -   AC97_BITCLK
+GPIO40  -   AC97_nRESET
+
+UART1
+-----
+GPIO41  -   UART_RXD1
+GPIO42  -   UART_TXD1
+GPIO43  -   UART_CTS1
+GPIO44  -   UART_DCD1
+GPIO45  -   UART_DSR1
+GPIO46  -   UART_nRI1
+GPIO47  -   UART_DTR1
+GPIO48  -   UART_RTS1
+
+UART2
+-----
+GPIO109 -   RTS2
+GPIO110 -   RXD2
+GPIO111 -   TXD2
+GPIO112 -   nCTS2
+
+UART3
+-----
+GPIO105 -   nCTS3
+GPIO106 -   nRTS3
+GPIO107 -   TXD3
+GPIO108 -   RXD3
+
+SSP3    - Leave unconfigured for now...
+----
+GPIO89  -   SSP3_CLK
+GPIO90  -   SSP3_SFRM
+GPIO91  -   SSP3_TXD
+GPIO92  -   SSP3_RXD
+
+SSP4
+GPIO93  -   SSP4_CLK
+GPIO94  -   SSP4_SFRM
+GPIO95  -   SSP4_TXD
+GPIO96  -   SSP4_RXD
+*/
+
+static mfp_cfg_t mfp_cfg[] __initdata = {
+	/* USB */
+	GPIO10_UTM_CLK,
+	GPIO49_U2D_PHYDATA_0,
+	GPIO50_U2D_PHYDATA_1,
+	GPIO51_U2D_PHYDATA_2,
+	GPIO52_U2D_PHYDATA_3,
+	GPIO53_U2D_PHYDATA_4,
+	GPIO54_U2D_PHYDATA_5,
+	GPIO55_U2D_PHYDATA_6,
+	GPIO56_U2D_PHYDATA_7,
+	GPIO58_UTM_RXVALID,
+	GPIO59_UTM_RXACTIVE,
+	GPIO60_U2D_RXERROR,
+	GPIO61_U2D_OPMODE0,
+	GPIO62_U2D_OPMODE1,
+	GPIO71_GPIO, /* USBD_INT */
+	GPIO73_UTM_TXREADY,
+	GPIO83_U2D_TXVALID,
+	GPIO98_U2D_RESET,
+	GPIO99_U2D_XCVR_SEL,
+	GPIO100_U2D_TERM_SEL,
+	GPIO101_U2D_SUSPEND,
+	GPIO102_UTM_LINESTATE_0,
+	GPIO103_UTM_LINESTATE_1,
+	GPIO4_2_GPIO | MFP_PULL_HIGH, /* UTM_PULLUP */
+
+	/* DM9000 */
+	GPIO1_GPIO,
+	GPIO9_GPIO,
+	GPIO36_GPIO,
+
+	/* AC97 */
+	GPIO35_AC97_SDATA_IN_0,
+	GPIO37_AC97_SDATA_OUT,
+	GPIO38_AC97_SYNC,
+	GPIO39_AC97_BITCLK,
+	GPIO40_AC97_nACRESET,
+
+	/* UARTS */
+	GPIO41_UART1_RXD,
+	GPIO42_UART1_TXD,
+	GPIO43_UART1_CTS,
+	GPIO44_UART1_DCD,
+	GPIO45_UART1_DSR,
+	GPIO46_UART1_RI,
+	GPIO47_UART1_DTR,
+	GPIO48_UART1_RTS,
+
+	GPIO109_UART2_RTS,
+	GPIO110_UART2_RXD,
+	GPIO111_UART2_TXD,
+	GPIO112_UART2_CTS,
+
+	GPIO105_UART3_CTS,
+	GPIO106_UART3_RTS,
+	GPIO107_UART3_TXD,
+	GPIO108_UART3_RXD,
+
+	GPIO78_GPIO,
+	GPIO79_GPIO,
+	GPIO80_GPIO,
+	GPIO81_GPIO,
+
+	/* I2C */
+	GPIO32_I2C_SCL,
+	GPIO33_I2C_SDA,
+
+	/* MMC */
+	GPIO18_MMC1_DAT0,
+	GPIO19_MMC1_DAT1,
+	GPIO20_MMC1_DAT2,
+	GPIO21_MMC1_DAT3,
+	GPIO22_MMC1_CLK,
+	GPIO23_MMC1_CMD,
+	GPIO72_GPIO | MFP_PULL_HIGH, /* Card Detect */
+	GPIO84_GPIO | MFP_PULL_LOW, /* Write Protect */
+
+	/* IRQ */
+	GPIO74_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ1 */
+	GPIO75_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ2 */
+	GPIO76_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ3 */
+	GPIO77_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ4 */
+	GPIO78_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ5 */
+	GPIO79_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ6 */
+	GPIO80_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ7 */
+	GPIO81_GPIO | MFP_LPM_EDGE_RISE  /* EXT_IRQ8 */
+};
+
+/* MMC/MCI Support */
+#if defined(CONFIG_MMC)
+static struct pxamci_platform_data mxm_8x10_mci_platform_data = {
+	.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+	.detect_delay = 1,
+	.gpio_card_detect = MXM_8X10_SD_nCD,
+	.gpio_card_ro = MXM_8X10_SD_WP,
+	.gpio_power = -1
+};
+
+void __init mxm_8x10_mmc_init(void)
+{
+	pxa_set_mci_info(&mxm_8x10_mci_platform_data);
+}
+#endif
+
+/* USB Open Host Controler Interface */
+static struct pxaohci_platform_data mxm_8x10_ohci_platform_data = {
+	.port_mode = PMM_NPS_MODE,
+	.flags = ENABLE_PORT_ALL
+};
+
+void __init mxm_8x10_usb_host_init(void)
+{
+	pxa_set_ohci_info(&mxm_8x10_ohci_platform_data);
+}
+
+/* AC97 Sound Support */
+static struct platform_device mxm_8x10_ac97_device = {
+	.name = "pxa2xx-ac97"
+};
+
+void __init mxm_8x10_ac97_init(void)
+{
+	platform_device_register(&mxm_8x10_ac97_device);
+}
+
+/* NAND flash Support */
+#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+#define NAND_BLOCK_SIZE SZ_128K
+#define NB(x)           (NAND_BLOCK_SIZE * (x))
+static struct mtd_partition mxm_8x10_nand_partitions[] = {
+	[0] = {
+	       .name = "boot",
+	       .size = NB(0x002),
+	       .offset = NB(0x000),
+	       .mask_flags = MTD_WRITEABLE
+	},
+	[1] = {
+	       .name = "kernel",
+	       .size = NB(0x010),
+	       .offset = NB(0x002),
+	       .mask_flags = MTD_WRITEABLE
+	},
+	[2] = {
+	       .name = "root",
+	       .size = NB(0x36c),
+	       .offset = NB(0x012)
+	},
+	[3] = {
+	       .name = "bbt",
+	       .size = NB(0x082),
+	       .offset = NB(0x37e),
+	       .mask_flags = MTD_WRITEABLE
+	}
+};
+
+static struct pxa3xx_nand_platform_data mxm_8x10_nand_info = {
+	.enable_arbiter = 1,
+	.keep_config = 1,
+	.parts = mxm_8x10_nand_partitions,
+	.nr_parts = ARRAY_SIZE(mxm_8x10_nand_partitions)
+};
+
+static void __init mxm_8x10_nand_init(void)
+{
+	pxa3xx_set_nand_info(&mxm_8x10_nand_info);
+}
+#else
+static inline void mxm_8x10_nand_init(void) {}
+#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
+
+/* Ethernet support: Davicom DM9000 */
+static struct resource dm9k_resources[] = {
+	[0] = {
+	       .start = MXM_8X10_ETH_PHYS + 0x300,
+	       .end = MXM_8X10_ETH_PHYS + 0x300,
+	       .flags = IORESOURCE_MEM
+	},
+	[1] = {
+	       .start = MXM_8X10_ETH_PHYS + 0x308,
+	       .end = MXM_8X10_ETH_PHYS + 0x308,
+	       .flags = IORESOURCE_MEM
+	},
+	[2] = {
+	       .start = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO9)),
+	       .end = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO9)),
+	       .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE
+	}
+};
+
+static struct dm9000_plat_data dm9k_plat_data = {
+	.flags = DM9000_PLATF_16BITONLY
+};
+
+static struct platform_device dm9k_device = {
+	.name = "dm9000",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(dm9k_resources),
+	.resource = dm9k_resources,
+	.dev = {
+		.platform_data = &dm9k_plat_data
+	}
+};
+
+static void __init mxm_8x10_ethernet_init(void)
+{
+	platform_device_register(&dm9k_device);
+}
+
+/* PXA UARTs */
+static void __init mxm_8x10_uarts_init(void)
+{
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+}
+
+/* I2C and Real Time Clock */
+static struct i2c_board_info __initdata mxm_8x10_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("ds1337", 0x68)
+	}
+};
+
+static void __init mxm_8x10_i2c_init(void)
+{
+	i2c_register_board_info(0, mxm_8x10_i2c_devices,
+				ARRAY_SIZE(mxm_8x10_i2c_devices));
+	pxa_set_i2c_info(NULL);
+}
+
+void __init mxm_8x10_barebones_init(void)
+{
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(mfp_cfg));
+
+	mxm_8x10_uarts_init();
+	mxm_8x10_nand_init();
+	mxm_8x10_i2c_init();
+	mxm_8x10_ethernet_init();
+}
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index e100af78b166..f70c75b38769 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -83,26 +83,7 @@ static unsigned long palmld_pin_config[] __initdata = {
 	GPIO105_KP_MKOUT_2,
 
 	/* LCD */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
+	GPIOxx_LCD_TFT_16BPP,
 
 	/* PWM */
 	GPIO16_PWM0_OUT,
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 8fe3ec27568f..d902a813aae3 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -87,26 +87,7 @@ static unsigned long palmt5_pin_config[] __initdata = {
 	GPIO105_KP_MKOUT_2,
 
 	/* LCD */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
+	GPIOxx_LCD_TFT_16BPP,
 
 	/* PWM */
 	GPIO16_PWM0_OUT,
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index b992f07ece21..717d7a638675 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -84,26 +84,7 @@ static unsigned long palmtc_pin_config[] __initdata = {
 	GPIO36_GPIO,	/* pullup */
 
 	/* LCD */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
+	GPIOxx_LCD_TFT_16BPP,
 
 	/* MATRIX KEYPAD */
 	GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH,	/* in 0 */
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index dc728d6ab94e..3d284ff1a64e 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -73,26 +73,7 @@ static unsigned long palmte2_pin_config[] __initdata = {
 	GPIO47_FICP_TXD,
 
 	/* LCD */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
+	GPIOxx_LCD_TFT_16BPP,
 
 	/* GPIO KEYS */
 	GPIO5_GPIO,	/* notes */
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
index b433bb496711..d8b4469607a1 100644
--- a/arch/arm/mach-pxa/palmtreo.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -99,25 +99,7 @@ static unsigned long treo_pin_config[] __initdata = {
 	GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,	/* Hotsync button */
 
 	/* LCD */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
+	GPIOxx_LCD_TFT_16BPP,
 
 	/* Quick Capture Interface */
 	GPIO84_CIF_FV,
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index b37a025c0b7b..007b58c11f8d 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -110,26 +110,7 @@ static unsigned long palmtx_pin_config[] __initdata = {
 	GPIO105_KP_MKOUT_2,
 
 	/* LCD */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
+	GPIOxx_LCD_TFT_16BPP,
 
 	/* FFUART */
 	GPIO34_FFUART_RXD,
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index 1c5d68a94511..3a7925ca3944 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -95,26 +95,8 @@ static unsigned long palmz72_pin_config[] __initdata = {
 	GPIO105_KP_MKOUT_2,
 
 	/* LCD */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
+	GPIOxx_LCD_TFT_16BPP,
+
 	GPIO20_GPIO,	/* bl power */
 	GPIO21_GPIO,	/* LCD border switch */
 	GPIO22_GPIO,	/* LCD border color */
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index d5255ae74fe3..9d0ecea1760c 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -58,6 +58,12 @@ static unsigned long pcm990_pin_config[] __initdata = {
 	/* I2C */
 	GPIO117_I2C_SCL,
 	GPIO118_I2C_SDA,
+
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
 };
 
 /*
@@ -259,8 +265,7 @@ static void pcm990_irq_handler(unsigned int irq, struct irq_desc *desc)
 	unsigned long pending = (~PCM990_INTSETCLR) & pcm990_irq_enabled;
 
 	do {
-		GEDR(PCM990_CTRL_INT_IRQ_GPIO) =
-					GPIO_bit(PCM990_CTRL_INT_IRQ_GPIO);
+		desc->chip->ack(irq);	/* clear our parent IRQ */
 		if (likely(pending)) {
 			irq = PCM027_IRQ(0) + __ffs(pending);
 			generic_handle_irq(irq);
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index c2b938a4d5c9..d58a52415d75 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -91,26 +91,7 @@ static unsigned long poodle_pin_config[] __initdata = {
 	GPIO35_FFUART_CTS,
 
 	/* LCD */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
+	GPIOxx_LCD_TFT_16BPP,
 
 	/* PC Card */
 	GPIO48_nPOE,
@@ -193,11 +174,18 @@ static struct resource locomo_resources[] = {
 	},
 };
 
+static struct locomo_platform_data locomo_info = {
+	.irq_base	= IRQ_BOARD_START,
+};
+
 struct platform_device poodle_locomo_device = {
 	.name		= "locomo",
 	.id		= 0,
 	.num_resources	= ARRAY_SIZE(locomo_resources),
 	.resource	= locomo_resources,
+	.dev		= {
+		.platform_data	= &locomo_info,
+	},
 };
 
 EXPORT_SYMBOL(poodle_locomo_device);
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index d783123e2d48..0af36177ff08 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -40,6 +40,25 @@ void pxa27x_clear_otgph(void)
 }
 EXPORT_SYMBOL(pxa27x_clear_otgph);
 
+static unsigned long ac97_reset_config[] = {
+	GPIO95_AC97_nRESET,
+	GPIO95_GPIO,
+	GPIO113_AC97_nRESET,
+	GPIO113_GPIO,
+};
+
+void pxa27x_assert_ac97reset(int reset_gpio, int on)
+{
+	if (reset_gpio == 113)
+		pxa2xx_mfp_config(on ? &ac97_reset_config[0] :
+				       &ac97_reset_config[1], 1);
+
+	if (reset_gpio == 95)
+		pxa2xx_mfp_config(on ? &ac97_reset_config[2] :
+				       &ac97_reset_config[3], 1);
+}
+EXPORT_SYMBOL_GPL(pxa27x_assert_ac97reset);
+
 /* Crystal clock: 13MHz */
 #define BASE_CLK	13000000
 
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
new file mode 100644
index 000000000000..3184bdc14526
--- /dev/null
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -0,0 +1,1108 @@
+/*
+ * arch/arm/mach-pxa/raumfeld.c
+ *
+ * Support for the following Raumfeld devices:
+ *
+ * 	* Controller
+ *  	* Connector
+ *  	* Speaker S/M
+ *
+ * See http://www.raumfeld.com for details.
+ *
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sysdev.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
+#include <linux/input.h>
+#include <linux/rotary_encoder.h>
+#include <linux/gpio_keys.h>
+#include <linux/input/eeti_ts.h>
+#include <linux/leds.h>
+#include <linux/w1-gpio.h>
+#include <linux/sched.h>
+#include <linux/pwm_backlight.h>
+#include <linux/i2c.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/lis3lv02d.h>
+#include <linux/pda_power.h>
+#include <linux/power_supply.h>
+#include <linux/pda_power.h>
+#include <linux/power_supply.h>
+#include <linux/regulator/max8660.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/consumer.h>
+#include <linux/delay.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa3xx.h>
+#include <mach/mfp-pxa300.h>
+#include <mach/ohci.h>
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
+#include <plat/i2c.h>
+#include <plat/pxa3xx_nand.h>
+
+#include "generic.h"
+#include "devices.h"
+#include "clock.h"
+
+/* common GPIO	definitions */
+
+/* inputs */
+#define GPIO_ON_OFF		(14)
+#define GPIO_VOLENC_A		(19)
+#define GPIO_VOLENC_B		(20)
+#define GPIO_CHARGE_DONE	(23)
+#define GPIO_CHARGE_IND		(27)
+#define GPIO_TOUCH_IRQ		(32)
+#define GPIO_ETH_IRQ		(40)
+#define GPIO_SPI_MISO		(98)
+#define GPIO_ACCEL_IRQ		(104)
+#define GPIO_RESCUE_BOOT	(115)
+#define GPIO_DOCK_DETECT	(116)
+#define GPIO_KEY1		(117)
+#define GPIO_KEY2		(118)
+#define GPIO_KEY3		(119)
+#define GPIO_CHARGE_USB_OK	(112)
+#define GPIO_CHARGE_DC_OK	(101)
+#define GPIO_CHARGE_USB_SUSP	(102)
+
+/* outputs */
+#define GPIO_SHUTDOWN_SUPPLY	(16)
+#define GPIO_SHUTDOWN_BATT	(18)
+#define GPIO_CHRG_PEN2		(31)
+#define GPIO_TFT_VA_EN		(33)
+#define GPIO_SPDIF_CS		(34)
+#define GPIO_LED2		(35)
+#define GPIO_LED1		(36)
+#define GPIO_SPDIF_RESET	(38)
+#define GPIO_SPI_CLK		(95)
+#define GPIO_MCLK_DAC_CS	(96)
+#define GPIO_SPI_MOSI		(97)
+#define GPIO_W1_PULLUP_ENABLE	(105)
+#define GPIO_DISPLAY_ENABLE	(106)
+#define GPIO_MCLK_RESET		(111)
+#define GPIO_W2W_RESET		(113)
+#define GPIO_W2W_PDN		(114)
+#define GPIO_CODEC_RESET	(120)
+#define GPIO_AUDIO_VA_ENABLE	(124)
+#define GPIO_ACCEL_CS		(125)
+#define GPIO_ONE_WIRE		(126)
+
+/*
+ * GPIO configurations
+ */
+static mfp_cfg_t raumfeld_controller_pin_config[] __initdata = {
+	/* UART1 */
+	GPIO77_UART1_RXD,
+	GPIO78_UART1_TXD,
+	GPIO79_UART1_CTS,
+	GPIO81_UART1_DSR,
+	GPIO83_UART1_DTR,
+	GPIO84_UART1_RTS,
+
+	/* UART3 */
+	GPIO110_UART3_RXD,
+
+	/* USB Host */
+	GPIO0_2_USBH_PEN,
+	GPIO1_2_USBH_PWR,
+
+	/* I2C */
+	GPIO21_I2C_SCL | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
+	GPIO22_I2C_SDA | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
+
+	/* SPI */
+	GPIO34_GPIO,	/* SPDIF_CS */
+	GPIO96_GPIO,	/* MCLK_CS */
+	GPIO125_GPIO,	/* ACCEL_CS */
+
+	/* MMC */
+	GPIO3_MMC1_DAT0,
+	GPIO4_MMC1_DAT1,
+	GPIO5_MMC1_DAT2,
+	GPIO6_MMC1_DAT3,
+	GPIO7_MMC1_CLK,
+	GPIO8_MMC1_CMD,
+
+	/* One-wire */
+	GPIO126_GPIO | MFP_LPM_FLOAT,
+	GPIO105_GPIO | MFP_PULL_LOW | MFP_LPM_PULL_LOW,
+
+	/* CHRG_USB_OK */
+	GPIO101_GPIO | MFP_PULL_HIGH,
+	/* CHRG_USB_OK */
+	GPIO112_GPIO | MFP_PULL_HIGH,
+	/* CHRG_USB_SUSP */
+	GPIO102_GPIO,
+	/* DISPLAY_ENABLE */
+	GPIO106_GPIO,
+	/* DOCK_DETECT */
+	GPIO116_GPIO | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
+
+	/* LCD */
+	GPIO54_LCD_LDD_0,
+	GPIO55_LCD_LDD_1,
+	GPIO56_LCD_LDD_2,
+	GPIO57_LCD_LDD_3,
+	GPIO58_LCD_LDD_4,
+	GPIO59_LCD_LDD_5,
+	GPIO60_LCD_LDD_6,
+	GPIO61_LCD_LDD_7,
+	GPIO62_LCD_LDD_8,
+	GPIO63_LCD_LDD_9,
+	GPIO64_LCD_LDD_10,
+	GPIO65_LCD_LDD_11,
+	GPIO66_LCD_LDD_12,
+	GPIO67_LCD_LDD_13,
+	GPIO68_LCD_LDD_14,
+	GPIO69_LCD_LDD_15,
+	GPIO70_LCD_LDD_16,
+	GPIO71_LCD_LDD_17,
+	GPIO72_LCD_FCLK,
+	GPIO73_LCD_LCLK,
+	GPIO74_LCD_PCLK,
+	GPIO75_LCD_BIAS,
+};
+
+static mfp_cfg_t raumfeld_connector_pin_config[] __initdata = {
+	/* UART1 */
+	GPIO77_UART1_RXD,
+	GPIO78_UART1_TXD,
+	GPIO79_UART1_CTS,
+	GPIO81_UART1_DSR,
+	GPIO83_UART1_DTR,
+	GPIO84_UART1_RTS,
+
+	/* UART3 */
+	GPIO110_UART3_RXD,
+
+	/* USB Host */
+	GPIO0_2_USBH_PEN,
+	GPIO1_2_USBH_PWR,
+
+	/* I2C */
+	GPIO21_I2C_SCL | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
+	GPIO22_I2C_SDA | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
+
+	/* SPI */
+	GPIO34_GPIO,	/* SPDIF_CS */
+	GPIO96_GPIO,	/* MCLK_CS */
+	GPIO125_GPIO,	/* ACCEL_CS */
+
+	/* MMC */
+	GPIO3_MMC1_DAT0,
+	GPIO4_MMC1_DAT1,
+	GPIO5_MMC1_DAT2,
+	GPIO6_MMC1_DAT3,
+	GPIO7_MMC1_CLK,
+	GPIO8_MMC1_CMD,
+
+	/* Ethernet */
+	GPIO1_nCS2,			/* CS */
+	GPIO40_GPIO | MFP_PULL_HIGH,	/* IRQ */
+
+	/* SSP for I2S */
+	GPIO85_SSP1_SCLK,
+	GPIO89_SSP1_EXTCLK,
+	GPIO86_SSP1_FRM,
+	GPIO87_SSP1_TXD,
+	GPIO88_SSP1_RXD,
+	GPIO90_SSP1_SYSCLK,
+
+	/* SSP2 for S/PDIF */
+	GPIO25_SSP2_SCLK,
+	GPIO26_SSP2_FRM,
+	GPIO27_SSP2_TXD,
+	GPIO29_SSP2_EXTCLK,
+
+	/* LEDs */
+	GPIO35_GPIO | MFP_LPM_PULL_LOW,
+	GPIO36_GPIO | MFP_LPM_DRIVE_HIGH,
+};
+
+static mfp_cfg_t raumfeld_speaker_pin_config[] __initdata = {
+	/* UART1 */
+	GPIO77_UART1_RXD,
+	GPIO78_UART1_TXD,
+	GPIO79_UART1_CTS,
+	GPIO81_UART1_DSR,
+	GPIO83_UART1_DTR,
+	GPIO84_UART1_RTS,
+
+	/* UART3 */
+	GPIO110_UART3_RXD,
+
+	/* USB Host */
+	GPIO0_2_USBH_PEN,
+	GPIO1_2_USBH_PWR,
+
+	/* I2C */
+	GPIO21_I2C_SCL | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
+	GPIO22_I2C_SDA | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
+
+	/* SPI */
+	GPIO34_GPIO,	/* SPDIF_CS */
+	GPIO96_GPIO,	/* MCLK_CS */
+	GPIO125_GPIO,	/* ACCEL_CS */
+
+	/* MMC */
+	GPIO3_MMC1_DAT0,
+	GPIO4_MMC1_DAT1,
+	GPIO5_MMC1_DAT2,
+	GPIO6_MMC1_DAT3,
+	GPIO7_MMC1_CLK,
+	GPIO8_MMC1_CMD,
+
+	/* Ethernet */
+	GPIO1_nCS2,			/* CS */
+	GPIO40_GPIO | MFP_PULL_HIGH,	/* IRQ */
+
+	/* SSP for I2S */
+	GPIO85_SSP1_SCLK,
+	GPIO89_SSP1_EXTCLK,
+	GPIO86_SSP1_FRM,
+	GPIO87_SSP1_TXD,
+	GPIO88_SSP1_RXD,
+	GPIO90_SSP1_SYSCLK,
+
+	/* LEDs */
+	GPIO35_GPIO | MFP_LPM_PULL_LOW,
+	GPIO36_GPIO | MFP_LPM_DRIVE_HIGH,
+};
+
+/*
+ * SMSC LAN9220 Ethernet
+ */
+
+static struct resource smc91x_resources[] = {
+	{
+		.start	= PXA3xx_CS2_PHYS,
+		.end	= PXA3xx_CS2_PHYS + 0xfffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= gpio_to_irq(GPIO_ETH_IRQ),
+		.end	= gpio_to_irq(GPIO_ETH_IRQ),
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
+	}
+};
+
+static struct smsc911x_platform_config raumfeld_smsc911x_config = {
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+	.dev		= {
+		.platform_data = &raumfeld_smsc911x_config,
+	}
+};
+
+/**
+ * NAND
+ */
+
+static struct mtd_partition raumfeld_nand_partitions[] = {
+	{
+		.name		= "Bootloader",
+		.offset		= 0,
+		.size		= 0xa0000,
+		.mask_flags	= MTD_WRITEABLE, /* force read-only */
+	},
+	{
+		.name		= "BootloaderEnvironment",
+		.offset		= 0xa0000,
+		.size		= 0x20000,
+	},
+	{
+		.name		= "BootloaderSplashScreen",
+		.offset		= 0xc0000,
+		.size		= 0x60000,
+	},
+	{
+		.name		= "UBI",
+		.offset		= 0x120000,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct pxa3xx_nand_platform_data raumfeld_nand_info = {
+	.enable_arbiter	= 1,
+	.keep_config	= 1,
+	.parts		= raumfeld_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(raumfeld_nand_partitions),
+};
+
+/**
+ * USB (OHCI) support
+ */
+
+static struct pxaohci_platform_data raumfeld_ohci_info = {
+	.port_mode      = PMM_GLOBAL_MODE,
+	.flags		= ENABLE_PORT1,
+};
+
+/**
+ * Rotary encoder input device
+ */
+
+static struct rotary_encoder_platform_data raumfeld_rotary_encoder_info = {
+	.steps		= 24,
+	.axis		= REL_X,
+	.relative_axis	= 1,
+	.gpio_a		= GPIO_VOLENC_A,
+	.gpio_b		= GPIO_VOLENC_B,
+	.inverted_a	= 1,
+	.inverted_b	= 0,
+};
+
+static struct platform_device rotary_encoder_device = {
+	.name		= "rotary-encoder",
+	.id		= 0,
+	.dev		= {
+		.platform_data = &raumfeld_rotary_encoder_info,
+	}
+};
+
+/**
+ * GPIO buttons
+ */
+
+static struct gpio_keys_button gpio_keys_button[] = {
+	{
+		.code			= KEY_F1,
+		.type			= EV_KEY,
+		.gpio			= GPIO_KEY1,
+		.active_low		= 1,
+		.wakeup			= 0,
+		.debounce_interval	= 5, /* ms */
+		.desc			= "Button 1",
+	},
+	{
+		.code			= KEY_F2,
+		.type			= EV_KEY,
+		.gpio			= GPIO_KEY2,
+		.active_low		= 1,
+		.wakeup			= 0,
+		.debounce_interval	= 5, /* ms */
+		.desc			= "Button 2",
+	},
+	{
+		.code			= KEY_F3,
+		.type			= EV_KEY,
+		.gpio			= GPIO_KEY3,
+		.active_low		= 1,
+		.wakeup			= 0,
+		.debounce_interval	= 5, /* ms */
+		.desc			= "Button 3",
+	},
+	{
+		.code			= KEY_F4,
+		.type			= EV_KEY,
+		.gpio			= GPIO_RESCUE_BOOT,
+		.active_low		= 0,
+		.wakeup			= 0,
+		.debounce_interval	= 5, /* ms */
+		.desc			= "rescue boot button",
+	},
+	{
+		.code			= KEY_F5,
+		.type			= EV_KEY,
+		.gpio			= GPIO_DOCK_DETECT,
+		.active_low		= 1,
+		.wakeup			= 0,
+		.debounce_interval	= 5, /* ms */
+		.desc			= "dock detect",
+	},
+	{
+		.code			= KEY_F6,
+		.type			= EV_KEY,
+		.gpio			= GPIO_ON_OFF,
+		.active_low		= 0,
+		.wakeup			= 0,
+		.debounce_interval	= 5, /* ms */
+		.desc			= "on/off button",
+	},
+};
+
+static struct gpio_keys_platform_data gpio_keys_platform_data = {
+	.buttons	= gpio_keys_button,
+	.nbuttons	= ARRAY_SIZE(gpio_keys_button),
+	.rep		= 0,
+};
+
+static struct platform_device raumfeld_gpio_keys_device = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev 	= {
+		.platform_data	= &gpio_keys_platform_data,
+	}
+};
+
+/**
+ * GPIO LEDs
+ */
+
+static struct gpio_led raumfeld_leds[] = {
+	{
+		.name		= "raumfeld:1",
+		.gpio		= GPIO_LED1,
+		.active_low	= 1,
+		.default_state	= LEDS_GPIO_DEFSTATE_ON,
+	},
+	{
+		.name		= "raumfeld:2",
+		.gpio		= GPIO_LED2,
+		.active_low	= 0,
+		.default_state	= LEDS_GPIO_DEFSTATE_OFF,
+	}
+};
+
+static struct gpio_led_platform_data raumfeld_led_platform_data = {
+	.leds		= raumfeld_leds,
+	.num_leds	= ARRAY_SIZE(raumfeld_leds),
+};
+
+static struct platform_device raumfeld_led_device = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &raumfeld_led_platform_data,
+	},
+};
+
+/**
+ * One-wire (W1 bus) support
+ */
+
+static void w1_enable_external_pullup(int enable)
+{
+	gpio_set_value(GPIO_W1_PULLUP_ENABLE, enable);
+	msleep(100);
+}
+
+static struct w1_gpio_platform_data w1_gpio_platform_data = {
+	.pin			= GPIO_ONE_WIRE,
+	.is_open_drain		= 0,
+	.enable_external_pullup	= w1_enable_external_pullup,
+};
+
+struct platform_device raumfeld_w1_gpio_device = {
+	.name	= "w1-gpio",
+	.dev	= {
+		.platform_data = &w1_gpio_platform_data
+	}
+};
+
+static void __init raumfeld_w1_init(void)
+{
+	int ret = gpio_request(GPIO_W1_PULLUP_ENABLE,
+				"W1 external pullup enable");
+
+	if (ret < 0)
+		pr_warning("Unable to request GPIO_W1_PULLUP_ENABLE\n");
+	else
+		gpio_direction_output(GPIO_W1_PULLUP_ENABLE, 0);
+
+	platform_device_register(&raumfeld_w1_gpio_device);
+}
+
+/**
+ * Framebuffer device
+ */
+
+/* PWM controlled backlight */
+static struct platform_pwm_backlight_data raumfeld_pwm_backlight_data = {
+	.pwm_id		= 0,
+	.max_brightness	= 100,
+	.dft_brightness	= 100,
+	/* 10000 ns = 10 ms ^= 100 kHz */
+	.pwm_period_ns	= 10000,
+};
+
+static struct platform_device raumfeld_pwm_backlight_device = {
+	.name	= "pwm-backlight",
+	.dev	= {
+		.parent		= &pxa27x_device_pwm0.dev,
+		.platform_data	= &raumfeld_pwm_backlight_data,
+	}
+};
+
+/* LT3593 controlled backlight */
+static struct gpio_led raumfeld_lt3593_led = {
+	.name		= "backlight",
+	.gpio		= mfp_to_gpio(MFP_PIN_GPIO17),
+	.default_state	= LEDS_GPIO_DEFSTATE_ON,
+};
+
+static struct gpio_led_platform_data raumfeld_lt3593_platform_data = {
+	.leds		= &raumfeld_lt3593_led,
+	.num_leds	= 1,
+};
+
+static struct platform_device raumfeld_lt3593_device = {
+	.name	= "leds-lt3593",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &raumfeld_lt3593_platform_data,
+	},
+};
+
+static struct pxafb_mode_info sharp_lq043t3dx02_mode = {
+	.pixclock	= 111000,
+	.xres		= 480,
+	.yres		= 272,
+	.bpp		= 16,
+	.hsync_len	= 4,
+	.left_margin	= 2,
+	.right_margin	= 1,
+	.vsync_len	= 1,
+	.upper_margin	= 3,
+	.lower_margin	= 1,
+	.sync		= 0,
+};
+
+static struct pxafb_mach_info raumfeld_sharp_lcd_info = {
+	.modes		= &sharp_lq043t3dx02_mode,
+	.num_modes	= 1,
+	.video_mem_size = 0x400000,
+	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+static void __init raumfeld_lcd_init(void)
+{
+	int ret;
+
+	set_pxa_fb_info(&raumfeld_sharp_lcd_info);
+
+	/* Earlier devices had the backlight regulator controlled
+	 * via PWM, later versions use another controller for that */
+	if ((system_rev & 0xff) < 2) {
+		mfp_cfg_t raumfeld_pwm_pin_config = GPIO17_PWM0_OUT;
+		pxa3xx_mfp_config(&raumfeld_pwm_pin_config, 1);
+		platform_device_register(&raumfeld_pwm_backlight_device);
+	} else
+		platform_device_register(&raumfeld_lt3593_device);
+
+	ret = gpio_request(GPIO_TFT_VA_EN, "display VA enable");
+	if (ret < 0)
+		pr_warning("Unable to request GPIO_TFT_VA_EN\n");
+	else
+		gpio_direction_output(GPIO_TFT_VA_EN, 1);
+
+	ret = gpio_request(GPIO_DISPLAY_ENABLE, "display enable");
+	if (ret < 0)
+		pr_warning("Unable to request GPIO_DISPLAY_ENABLE\n");
+	else
+		gpio_direction_output(GPIO_DISPLAY_ENABLE, 1);
+}
+
+/**
+ * SPI devices
+ */
+
+struct spi_gpio_platform_data raumfeld_spi_platform_data = {
+	.sck		= GPIO_SPI_CLK,
+	.mosi		= GPIO_SPI_MOSI,
+	.miso		= GPIO_SPI_MISO,
+	.num_chipselect	= 3,
+};
+
+static struct platform_device raumfeld_spi_device = {
+	.name	= "spi_gpio",
+	.id	= 0,
+	.dev 	= {
+		.platform_data	= &raumfeld_spi_platform_data,
+	}
+};
+
+static struct lis3lv02d_platform_data lis3_pdata = {
+	.click_flags 	= LIS3_CLICK_SINGLE_X |
+			  LIS3_CLICK_SINGLE_Y |
+			  LIS3_CLICK_SINGLE_Z,
+	.irq_cfg	= LIS3_IRQ1_CLICK | LIS3_IRQ2_CLICK,
+	.wakeup_flags	= LIS3_WAKEUP_X_LO | LIS3_WAKEUP_X_HI |
+			  LIS3_WAKEUP_Y_LO | LIS3_WAKEUP_Y_HI |
+			  LIS3_WAKEUP_Z_LO | LIS3_WAKEUP_Z_HI,
+	.wakeup_thresh	= 10,
+	.click_thresh_x = 10,
+	.click_thresh_y = 10,
+	.click_thresh_z = 10,
+};
+
+#define SPI_AK4104	\
+{			\
+	.modalias	= "ak4104",	\
+	.max_speed_hz	= 10000,	\
+	.bus_num	= 0,		\
+	.chip_select	= 0,		\
+	.controller_data = (void *) GPIO_SPDIF_CS,	\
+}
+
+#define SPI_LIS3	\
+{			\
+	.modalias	= "lis3lv02d_spi",	\
+	.max_speed_hz	= 1000000,		\
+	.bus_num	= 0,			\
+	.chip_select	= 1,			\
+	.controller_data = (void *) GPIO_ACCEL_CS,	\
+	.platform_data	= &lis3_pdata,		\
+	.irq		= gpio_to_irq(GPIO_ACCEL_IRQ),	\
+}
+
+#define SPI_DAC7512	\
+{	\
+	.modalias	= "dac7512",		\
+	.max_speed_hz	= 1000000,		\
+	.bus_num	= 0,			\
+	.chip_select	= 2,			\
+	.controller_data = (void *) GPIO_MCLK_DAC_CS,	\
+}
+
+static struct spi_board_info connector_spi_devices[] __initdata = {
+	SPI_AK4104,
+	SPI_DAC7512,
+};
+
+static struct spi_board_info speaker_spi_devices[] __initdata = {
+	SPI_DAC7512,
+};
+
+static struct spi_board_info controller_spi_devices[] __initdata = {
+	SPI_LIS3,
+};
+
+/**
+ * MMC for Marvell Libertas 8688 via SDIO
+ */
+
+static int raumfeld_mci_init(struct device *dev, irq_handler_t isr, void *data)
+{
+	gpio_set_value(GPIO_W2W_RESET, 1);
+	gpio_set_value(GPIO_W2W_PDN, 1);
+
+	return 0;
+}
+
+static void raumfeld_mci_exit(struct device *dev, void *data)
+{
+	gpio_set_value(GPIO_W2W_RESET, 0);
+	gpio_set_value(GPIO_W2W_PDN, 0);
+}
+
+static struct pxamci_platform_data raumfeld_mci_platform_data = {
+	.init			= raumfeld_mci_init,
+	.exit			= raumfeld_mci_exit,
+	.detect_delay		= 20,
+	.gpio_card_detect	= -1,
+	.gpio_card_ro		= -1,
+	.gpio_power		= -1,
+};
+
+/*
+ * External power / charge logic
+ */
+
+static int power_supply_init(struct device *dev)
+{
+	return 0;
+}
+
+static void power_supply_exit(struct device *dev)
+{
+}
+
+static int raumfeld_is_ac_online(void)
+{
+	return !gpio_get_value(GPIO_CHARGE_DC_OK);
+}
+
+static int raumfeld_is_usb_online(void)
+{
+	return 0;
+}
+
+static char *raumfeld_power_supplicants[] = { "ds2760-battery.0" };
+
+static struct pda_power_pdata power_supply_info = {
+	.init			= power_supply_init,
+	.is_ac_online		= raumfeld_is_ac_online,
+	.is_usb_online		= raumfeld_is_usb_online,
+	.exit			= power_supply_exit,
+	.supplied_to		= raumfeld_power_supplicants,
+	.num_supplicants	= ARRAY_SIZE(raumfeld_power_supplicants)
+};
+
+static struct resource power_supply_resources[] = {
+	{
+		.name  = "ac",
+		.flags = IORESOURCE_IRQ |
+			 IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE,
+		.start = GPIO_CHARGE_DC_OK,
+		.end   = GPIO_CHARGE_DC_OK,
+	},
+};
+
+static irqreturn_t charge_done_irq(int irq, void *dev_id)
+{
+	struct power_supply *psy;
+
+	psy = power_supply_get_by_name("ds2760-battery.0");
+
+	if (psy)
+		power_supply_set_battery_charged(psy);
+
+	return IRQ_HANDLED;
+}
+
+static struct platform_device raumfeld_power_supply = {
+	.name = "pda-power",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &power_supply_info,
+	},
+	.resource      = power_supply_resources,
+	.num_resources = ARRAY_SIZE(power_supply_resources),
+};
+
+static void __init raumfeld_power_init(void)
+{
+	int ret;
+
+	/* Set PEN2 high to enable maximum charge current */
+	ret = gpio_request(GPIO_CHRG_PEN2, "CHRG_PEN2");
+	if (ret < 0)
+		pr_warning("Unable to request GPIO_CHRG_PEN2\n");
+	else
+		gpio_direction_output(GPIO_CHRG_PEN2, 1);
+
+	ret = gpio_request(GPIO_CHARGE_DC_OK, "CABLE_DC_OK");
+	if (ret < 0)
+		pr_warning("Unable to request GPIO_CHARGE_DC_OK\n");
+
+	ret = gpio_request(GPIO_CHARGE_USB_SUSP, "CHARGE_USB_SUSP");
+	if (ret < 0)
+		pr_warning("Unable to request GPIO_CHARGE_USB_SUSP\n");
+	else
+		gpio_direction_output(GPIO_CHARGE_USB_SUSP, 0);
+
+	power_supply_resources[0].start = gpio_to_irq(GPIO_CHARGE_DC_OK);
+	power_supply_resources[0].end = gpio_to_irq(GPIO_CHARGE_DC_OK);
+
+	ret = request_irq(gpio_to_irq(GPIO_CHARGE_DONE),
+			&charge_done_irq, IORESOURCE_IRQ_LOWEDGE,
+			"charge_done", NULL);
+
+	if (ret < 0)
+		printk(KERN_ERR "%s: unable to register irq %d\n", __func__,
+			GPIO_CHARGE_DONE);
+	else
+		platform_device_register(&raumfeld_power_supply);
+}
+
+/* Fixed regulator for AUDIO_VA, 0-0048 maps to the cs4270 codec device */
+
+static struct regulator_consumer_supply audio_va_consumer_supply =
+	REGULATOR_SUPPLY("va", "0-0048");
+
+struct regulator_init_data audio_va_initdata = {
+	.consumer_supplies = &audio_va_consumer_supply,
+	.num_consumer_supplies = 1,
+	.constraints = {
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct fixed_voltage_config audio_va_config = {
+	.supply_name		= "audio_va",
+	.microvolts		= 5000000,
+	.gpio			= GPIO_AUDIO_VA_ENABLE,
+	.enable_high		= 1,
+	.enabled_at_boot	= 0,
+	.init_data		= &audio_va_initdata,
+};
+
+static struct platform_device audio_va_device = {
+	.name	= "reg-fixed-voltage",
+	.id	= 0,
+	.dev	= {
+		.platform_data = &audio_va_config,
+	},
+};
+
+/* Dummy supplies for Codec's VD/VLC */
+
+static struct regulator_consumer_supply audio_dummy_supplies[] = {
+	REGULATOR_SUPPLY("vd", "0-0048"),
+	REGULATOR_SUPPLY("vlc", "0-0048"),
+};
+
+struct regulator_init_data audio_dummy_initdata = {
+	.consumer_supplies = audio_dummy_supplies,
+	.num_consumer_supplies = ARRAY_SIZE(audio_dummy_supplies),
+	.constraints = {
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct fixed_voltage_config audio_dummy_config = {
+	.supply_name		= "audio_vd",
+	.microvolts		= 3300000,
+	.gpio			= -1,
+	.init_data		= &audio_dummy_initdata,
+};
+
+static struct platform_device audio_supply_dummy_device = {
+	.name	= "reg-fixed-voltage",
+	.id	= 1,
+	.dev	= {
+		.platform_data = &audio_dummy_config,
+	},
+};
+
+static struct platform_device *audio_regulator_devices[] = {
+	&audio_va_device,
+	&audio_supply_dummy_device,
+};
+
+/**
+ * Regulator support via MAX8660
+ */
+
+static struct regulator_consumer_supply vcc_mmc_supply =
+	REGULATOR_SUPPLY("vmmc", "pxa2xx-mci.0");
+
+static struct regulator_init_data vcc_mmc_init_data = {
+	.constraints = {
+		.min_uV			= 3300000,
+		.max_uV			= 3300000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL,
+		.valid_ops_mask		= REGULATOR_CHANGE_STATUS |
+					  REGULATOR_CHANGE_VOLTAGE |
+					  REGULATOR_CHANGE_MODE,
+	},
+	.consumer_supplies = &vcc_mmc_supply,
+	.num_consumer_supplies = 1,
+};
+
+struct max8660_subdev_data max8660_v6_subdev_data = {
+	.id		= MAX8660_V6,
+	.name		= "vmmc",
+	.platform_data	= &vcc_mmc_init_data,
+};
+
+static struct max8660_platform_data max8660_pdata = {
+	.subdevs = &max8660_v6_subdev_data,
+	.num_subdevs = 1,
+};
+
+/**
+ * I2C devices
+ */
+
+static struct i2c_board_info raumfeld_pwri2c_board_info = {
+	.type		= "max8660",
+	.addr		= 0x34,
+	.platform_data	= &max8660_pdata,
+};
+
+static struct i2c_board_info raumfeld_connector_i2c_board_info __initdata = {
+	.type	= "cs4270",
+	.addr	= 0x48,
+};
+
+static struct eeti_ts_platform_data eeti_ts_pdata = {
+	.irq_active_high = 1,
+};
+
+static struct i2c_board_info raumfeld_controller_i2c_board_info __initdata = {
+	.type	= "eeti_ts",
+	.addr	= 0x0a,
+	.irq	= gpio_to_irq(GPIO_TOUCH_IRQ),
+	.platform_data = &eeti_ts_pdata,
+};
+
+static struct platform_device *raumfeld_common_devices[] = {
+	&raumfeld_gpio_keys_device,
+	&raumfeld_led_device,
+	&raumfeld_spi_device,
+};
+
+static void __init raumfeld_audio_init(void)
+{
+	int ret;
+
+	ret = gpio_request(GPIO_CODEC_RESET, "cs4270 reset");
+	if (ret < 0)
+		pr_warning("unable to request GPIO_CODEC_RESET\n");
+	else
+		gpio_direction_output(GPIO_CODEC_RESET, 1);
+
+	ret = gpio_request(GPIO_SPDIF_RESET, "ak4104 s/pdif reset");
+	if (ret < 0)
+		pr_warning("unable to request GPIO_SPDIF_RESET\n");
+	else
+		gpio_direction_output(GPIO_SPDIF_RESET, 1);
+
+	ret = gpio_request(GPIO_MCLK_RESET, "MCLK reset");
+	if (ret < 0)
+		pr_warning("unable to request GPIO_MCLK_RESET\n");
+	else
+		gpio_direction_output(GPIO_MCLK_RESET, 1);
+
+	platform_add_devices(ARRAY_AND_SIZE(audio_regulator_devices));
+}
+
+static void __init raumfeld_common_init(void)
+{
+	int ret;
+
+	/* The on/off button polarity has changed after revision 1 */
+	if ((system_rev & 0xff) > 1) {
+		int i;
+
+		for (i = 0; i < ARRAY_SIZE(gpio_keys_button); i++)
+			if (!strcmp(gpio_keys_button[i].desc, "on/off button"))
+				gpio_keys_button[i].active_low = 1;
+	}
+
+	enable_irq_wake(IRQ_WAKEUP0);
+
+	pxa3xx_set_nand_info(&raumfeld_nand_info);
+	pxa3xx_set_i2c_power_info(NULL);
+	pxa_set_ohci_info(&raumfeld_ohci_info);
+	pxa_set_mci_info(&raumfeld_mci_platform_data);
+	pxa_set_i2c_info(NULL);
+	pxa_set_ffuart_info(NULL);
+
+	ret = gpio_request(GPIO_W2W_RESET, "Wi2Wi reset");
+	if (ret < 0)
+		pr_warning("Unable to request GPIO_W2W_RESET\n");
+	else
+		gpio_direction_output(GPIO_W2W_RESET, 0);
+
+	ret = gpio_request(GPIO_W2W_PDN, "Wi2Wi powerup");
+	if (ret < 0)
+		pr_warning("Unable to request GPIO_W2W_PDN\n");
+	else
+		gpio_direction_output(GPIO_W2W_PDN, 0);
+
+	/* this can be used to switch off the device */
+	ret = gpio_request(GPIO_SHUTDOWN_SUPPLY,
+				"supply shutdown");
+	if (ret < 0)
+		pr_warning("Unable to request GPIO_SHUTDOWN_SUPPLY\n");
+	else
+		gpio_direction_output(GPIO_SHUTDOWN_SUPPLY, 0);
+
+	platform_add_devices(ARRAY_AND_SIZE(raumfeld_common_devices));
+	i2c_register_board_info(1, &raumfeld_pwri2c_board_info, 1);
+}
+
+static void __init raumfeld_controller_init(void)
+{
+	int ret;
+
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_controller_pin_config));
+	platform_device_register(&rotary_encoder_device);
+	spi_register_board_info(ARRAY_AND_SIZE(controller_spi_devices));
+	i2c_register_board_info(0, &raumfeld_controller_i2c_board_info, 1);
+
+	ret = gpio_request(GPIO_SHUTDOWN_BATT, "battery shutdown");
+	if (ret < 0)
+		pr_warning("Unable to request GPIO_SHUTDOWN_BATT\n");
+	else
+		gpio_direction_output(GPIO_SHUTDOWN_BATT, 0);
+
+	raumfeld_common_init();
+	raumfeld_power_init();
+	raumfeld_lcd_init();
+	raumfeld_w1_init();
+}
+
+static void __init raumfeld_connector_init(void)
+{
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_connector_pin_config));
+	spi_register_board_info(ARRAY_AND_SIZE(connector_spi_devices));
+	i2c_register_board_info(0, &raumfeld_connector_i2c_board_info, 1);
+
+	platform_device_register(&smc91x_device);
+
+	raumfeld_audio_init();
+	raumfeld_common_init();
+}
+
+static void __init raumfeld_speaker_init(void)
+{
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_speaker_pin_config));
+	spi_register_board_info(ARRAY_AND_SIZE(speaker_spi_devices));
+	i2c_register_board_info(0, &raumfeld_connector_i2c_board_info, 1);
+
+	platform_device_register(&smc91x_device);
+	platform_device_register(&rotary_encoder_device);
+
+	raumfeld_audio_init();
+	raumfeld_common_init();
+}
+
+/* physical memory regions */
+#define	RAUMFELD_SDRAM_BASE	0xa0000000	/* SDRAM region */
+
+#ifdef CONFIG_MACH_RAUMFELD_RC
+MACHINE_START(RAUMFELD_RC, "Raumfeld Controller")
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= RAUMFELD_SDRAM_BASE + 0x100,
+	.init_machine	= raumfeld_controller_init,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa3xx_init_irq,
+	.timer		= &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_RAUMFELD_CONNECTOR
+MACHINE_START(RAUMFELD_CONNECTOR, "Raumfeld Connector")
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= RAUMFELD_SDRAM_BASE + 0x100,
+	.init_machine	= raumfeld_connector_init,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa3xx_init_irq,
+	.timer		= &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_RAUMFELD_SPEAKER
+MACHINE_START(RAUMFELD_SPEAKER, "Raumfeld Speaker")
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= RAUMFELD_SDRAM_BASE + 0x100,
+	.init_machine	= raumfeld_speaker_init,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa3xx_init_irq,
+	.timer		= &pxa_timer,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index 67229a1ef55c..463d874bb867 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -900,7 +900,7 @@ static struct platform_suspend_ops sharpsl_pm_ops = {
 };
 #endif
 
-static int __init sharpsl_pm_probe(struct platform_device *pdev)
+static int __devinit sharpsl_pm_probe(struct platform_device *pdev)
 {
 	int ret;
 
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 28352c0b8c34..19b5109d9808 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -56,25 +56,7 @@ static unsigned long spitz_pin_config[] __initdata = {
 	GPIO80_nCS_4,	/* SCOOP #1 */
 
 	/* LCD - 16bpp Active TFT */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
+	GPIOxx_LCD_TFT_16BPP,
 
 	/* PC Card */
 	GPIO48_nPOE,
diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c
index 9ebe658590fa..a81d6dbf662d 100644
--- a/arch/arm/mach-pxa/ssp.c
+++ b/arch/arm/mach-pxa/ssp.c
@@ -35,6 +35,8 @@
 #include <mach/ssp.h>
 #include <mach/regs-ssp.h>
 
+#ifdef CONFIG_PXA_SSP_LEGACY
+
 #define TIMEOUT 100000
 
 static irqreturn_t ssp_interrupt(int irq, void *dev_id)
@@ -303,6 +305,7 @@ void ssp_exit(struct ssp_dev *dev)
 	clk_disable(ssp->clk);
 	ssp_free(ssp);
 }
+#endif /* CONFIG_PXA_SSP_LEGACY */
 
 static DEFINE_MUTEX(ssp_lock);
 static LIST_HEAD(ssp_list);
@@ -488,6 +491,7 @@ static void __exit pxa_ssp_exit(void)
 arch_initcall(pxa_ssp_init);
 module_exit(pxa_ssp_exit);
 
+#ifdef CONFIG_PXA_SSP_LEGACY
 EXPORT_SYMBOL(ssp_write_word);
 EXPORT_SYMBOL(ssp_read_word);
 EXPORT_SYMBOL(ssp_flush);
@@ -498,6 +502,7 @@ EXPORT_SYMBOL(ssp_restore_state);
 EXPORT_SYMBOL(ssp_init);
 EXPORT_SYMBOL(ssp_exit);
 EXPORT_SYMBOL(ssp_config);
+#endif
 
 MODULE_DESCRIPTION("PXA SSP driver");
 MODULE_AUTHOR("Liam Girdwood");
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index 750c448db672..293e40aeaf29 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -76,14 +76,12 @@ pxa_ost0_interrupt(int irq, void *dev_id)
 static int
 pxa_osmr0_set_next_event(unsigned long delta, struct clock_event_device *dev)
 {
-	unsigned long flags, next, oscr;
+	unsigned long next, oscr;
 
-	raw_local_irq_save(flags);
 	OIER |= OIER_E0;
 	next = OSCR + delta;
 	OSMR0 = next;
 	oscr = OSCR;
-	raw_local_irq_restore(flags);
 
 	return (signed)(next - oscr) <= MIN_OSCR_DELTA ? -ETIME : 0;
 }
@@ -91,23 +89,17 @@ pxa_osmr0_set_next_event(unsigned long delta, struct clock_event_device *dev)
 static void
 pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev)
 {
-	unsigned long irqflags;
-
 	switch (mode) {
 	case CLOCK_EVT_MODE_ONESHOT:
-		raw_local_irq_save(irqflags);
 		OIER &= ~OIER_E0;
 		OSSR = OSSR_M0;
-		raw_local_irq_restore(irqflags);
 		break;
 
 	case CLOCK_EVT_MODE_UNUSED:
 	case CLOCK_EVT_MODE_SHUTDOWN:
 		/* initializing, released, or preparing for suspend */
-		raw_local_irq_save(irqflags);
 		OIER &= ~OIER_E0;
 		OSSR = OSSR_M0;
-		raw_local_irq_restore(irqflags);
 		break;
 
 	case CLOCK_EVT_MODE_RESUME:
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index c854c168a451..ad552791c4ce 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -32,6 +32,7 @@
 #include <linux/gpio.h>
 #include <linux/pda_power.h>
 #include <linux/spi/spi.h>
+#include <linux/input/matrix_keypad.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -131,24 +132,24 @@ static unsigned long tosa_pin_config[] = {
 	GPIO45_BTUART_RTS,
 
 	/* Keybd */
-	GPIO58_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO59_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO60_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO61_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO62_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO63_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO64_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO65_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO66_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO67_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO68_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO69_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO70_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO71_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO72_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO73_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO74_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO75_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO58_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 0 */
+	GPIO59_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 1 */
+	GPIO60_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 2 */
+	GPIO61_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 3 */
+	GPIO62_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 4 */
+	GPIO63_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 5 */
+	GPIO64_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 6 */
+	GPIO65_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 7 */
+	GPIO66_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 8 */
+	GPIO67_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 9 */
+	GPIO68_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 10 */
+	GPIO69_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 0 */
+	GPIO70_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 1 */
+	GPIO71_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 2 */
+	GPIO72_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 3 */
+	GPIO73_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 4 */
+	GPIO74_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 5 */
+	GPIO75_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 6 */
 
 	/* SPI */
 	GPIO81_SSP2_CLK_OUT,
@@ -411,9 +412,87 @@ static struct platform_device tosa_power_device = {
 /*
  * Tosa Keyboard
  */
+static const uint32_t tosakbd_keymap[] = {
+	KEY(0, 2, KEY_W),
+	KEY(0, 6, KEY_K),
+	KEY(0, 7, KEY_BACKSPACE),
+	KEY(0, 8, KEY_P),
+	KEY(1, 1, KEY_Q),
+	KEY(1, 2, KEY_E),
+	KEY(1, 3, KEY_T),
+	KEY(1, 4, KEY_Y),
+	KEY(1, 6, KEY_O),
+	KEY(1, 7, KEY_I),
+	KEY(1, 8, KEY_COMMA),
+	KEY(2, 1, KEY_A),
+	KEY(2, 2, KEY_D),
+	KEY(2, 3, KEY_G),
+	KEY(2, 4, KEY_U),
+	KEY(2, 6, KEY_L),
+	KEY(2, 7, KEY_ENTER),
+	KEY(2, 8, KEY_DOT),
+	KEY(3, 1, KEY_Z),
+	KEY(3, 2, KEY_C),
+	KEY(3, 3, KEY_V),
+	KEY(3, 4, KEY_J),
+	KEY(3, 5, TOSA_KEY_ADDRESSBOOK),
+	KEY(3, 6, TOSA_KEY_CANCEL),
+	KEY(3, 7, TOSA_KEY_CENTER),
+	KEY(3, 8, TOSA_KEY_OK),
+	KEY(3, 9, KEY_LEFTSHIFT),
+	KEY(4, 1, KEY_S),
+	KEY(4, 2, KEY_R),
+	KEY(4, 3, KEY_B),
+	KEY(4, 4, KEY_N),
+	KEY(4, 5, TOSA_KEY_CALENDAR),
+	KEY(4, 6, TOSA_KEY_HOMEPAGE),
+	KEY(4, 7, KEY_LEFTCTRL),
+	KEY(4, 8, TOSA_KEY_LIGHT),
+	KEY(4, 10, KEY_RIGHTSHIFT),
+	KEY(5, 1, KEY_TAB),
+	KEY(5, 2, KEY_SLASH),
+	KEY(5, 3, KEY_H),
+	KEY(5, 4, KEY_M),
+	KEY(5, 5, TOSA_KEY_MENU),
+	KEY(5, 7, KEY_UP),
+	KEY(5, 11, TOSA_KEY_FN),
+	KEY(6, 1, KEY_X),
+	KEY(6, 2, KEY_F),
+	KEY(6, 3, KEY_SPACE),
+	KEY(6, 4, KEY_APOSTROPHE),
+	KEY(6, 5, TOSA_KEY_MAIL),
+	KEY(6, 6, KEY_LEFT),
+	KEY(6, 7, KEY_DOWN),
+	KEY(6, 8, KEY_RIGHT),
+};
+
+static struct matrix_keymap_data tosakbd_keymap_data = {
+	.keymap		= tosakbd_keymap,
+	.keymap_size	= ARRAY_SIZE(tosakbd_keymap),
+};
+
+static const int tosakbd_col_gpios[] =
+			{ 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68 };
+static const int tosakbd_row_gpios[] =
+			{ 69, 70, 71, 72, 73, 74, 75 };
+
+static struct matrix_keypad_platform_data tosakbd_pdata = {
+	.keymap_data		= &tosakbd_keymap_data,
+	.row_gpios		= tosakbd_row_gpios,
+	.col_gpios		= tosakbd_col_gpios,
+	.num_row_gpios		= ARRAY_SIZE(tosakbd_row_gpios),
+	.num_col_gpios		= ARRAY_SIZE(tosakbd_col_gpios),
+	.col_scan_delay_us	= 10,
+	.debounce_ms		= 10,
+	.wakeup			= 1,
+};
+
 static struct platform_device tosakbd_device = {
-	.name		= "tosa-keyboard",
+	.name		= "matrix-keypad",
 	.id		= -1,
+	.dev		= {
+		.platform_data = &tosakbd_pdata,
+	},
 };
 
 static struct gpio_keys_button tosa_gpio_keys[] = {
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 0aa858ebc573..797f2544d0ce 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -72,27 +72,14 @@ static unsigned long trizeps4_pin_config[] __initdata = {
 	GPIO79_nCS_3,		/* Logic CS */
 	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,	/* Logic irq */
 
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
 	/* LCD - 16bpp Active TFT */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
+	GPIOxx_LCD_TFT_16BPP,
 
 	/* UART */
 	GPIO9_FFUART_CTS,
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index 89f258c9e126..1dd13346f977 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -281,7 +281,7 @@ static void viper_irq_handler(unsigned int irq, struct irq_desc *desc)
 	do {
 		/* we're in a chained irq handler,
 		 * so ack the interrupt by hand */
-		GEDR(VIPER_CPLD_GPIO) = GPIO_bit(VIPER_CPLD_GPIO);
+		desc->chip->ack(irq);
 
 		if (likely(pending)) {
 			irq = viper_bit_to_irq(__ffs(pending));
@@ -711,6 +711,12 @@ static mfp_cfg_t viper_pin_config[] __initdata = {
 	GPIO80_nCS_4,
 	GPIO33_nCS_5,
 
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
 	/* FP Backlight */
 	GPIO9_GPIO, 				/* VIPER_BCKLIGHT_EN_GPIO */
 	GPIO10_GPIO,				/* VIPER_LCD_EN_GPIO */
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index 75f2a37f945d..39896d883584 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -26,6 +26,7 @@
 #include <linux/i2c.h>
 #include <linux/i2c/pca953x.h>
 #include <linux/apm-emulation.h>
+#include <linux/can/platform/mcp251x.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -387,11 +388,47 @@ static struct pxa2xx_spi_master pxa2xx_spi_ssp3_master_info = {
 	.enable_dma     = 1,
 };
 
-static struct platform_device pxa2xx_spi_ssp3_device = {
-	.name = "pxa2xx-spi",
-	.id = 3,
-	.dev = {
-		.platform_data = &pxa2xx_spi_ssp3_master_info,
+/* CAN bus on SPI */
+static int zeus_mcp2515_setup(struct spi_device *sdev)
+{
+	int err;
+
+	err = gpio_request(ZEUS_CAN_SHDN_GPIO, "CAN shutdown");
+	if (err)
+		return err;
+
+	err = gpio_direction_output(ZEUS_CAN_SHDN_GPIO, 1);
+	if (err) {
+		gpio_free(ZEUS_CAN_SHDN_GPIO);
+		return err;
+	}
+
+	return 0;
+}
+
+static int zeus_mcp2515_transceiver_enable(int enable)
+{
+	gpio_set_value(ZEUS_CAN_SHDN_GPIO, !enable);
+	return 0;
+}
+
+static struct mcp251x_platform_data zeus_mcp2515_pdata = {
+	.oscillator_frequency	= 16*1000*1000,
+	.model			= CAN_MCP251X_MCP2515,
+	.board_specific_setup	= zeus_mcp2515_setup,
+	.transceiver_enable	= zeus_mcp2515_transceiver_enable,
+	.power_enable		= zeus_mcp2515_transceiver_enable,
+};
+
+static struct spi_board_info zeus_spi_board_info[] = {
+	[0] = {
+		.modalias	= "mcp251x",
+		.platform_data	= &zeus_mcp2515_pdata,
+		.irq		= gpio_to_irq(ZEUS_CAN_GPIO),
+		.max_speed_hz	= 1*1000*1000,
+		.bus_num	= 3,
+		.mode		= SPI_MODE_0,
+		.chip_select	= 0,
 	},
 };
 
@@ -457,15 +494,28 @@ static struct platform_device zeus_pcmcia_device = {
 	},
 };
 
+static struct resource zeus_max6369_resource = {
+	.start		= ZEUS_CPLD_EXTWDOG_PHYS,
+	.end		= ZEUS_CPLD_EXTWDOG_PHYS,
+	.flags		= IORESOURCE_MEM,
+};
+
+struct platform_device zeus_max6369_device = {
+	.name		= "max6369_wdt",
+	.id		= -1,
+	.resource	= &zeus_max6369_resource,
+	.num_resources	= 1,
+};
+
 static struct platform_device *zeus_devices[] __initdata = {
 	&zeus_serial_device,
 	&zeus_mtd_devices[0],
 	&zeus_dm9k0_device,
 	&zeus_dm9k1_device,
 	&zeus_sram_device,
-	&pxa2xx_spi_ssp3_device,
 	&zeus_leds_device,
 	&zeus_pcmcia_device,
+	&zeus_max6369_device,
 };
 
 /* AC'97 */
@@ -509,7 +559,9 @@ static void zeus_ohci_exit(struct device *dev)
 
 static struct pxaohci_platform_data zeus_ohci_platform_data = {
 	.port_mode	= PMM_NPS_MODE,
-	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+	/* Clear Power Control Polarity Low and set Power Sense
+	 * Polarity Low. Supply power to USB ports. */
+	.flags		= ENABLE_PORT_ALL | POWER_SENSE_LOW,
 	.init		= zeus_ohci_init,
 	.exit		= zeus_ohci_exit,
 };
@@ -621,11 +673,15 @@ static struct pxa2xx_udc_mach_info zeus_udc_info = {
 	.udc_command = zeus_udc_command,
 };
 
+#ifdef CONFIG_PM
 static void zeus_power_off(void)
 {
 	local_irq_disable();
 	pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP);
 }
+#else
+#define zeus_power_off   NULL
+#endif
 
 #ifdef CONFIG_APM_EMULATION
 static void zeus_get_power_status(struct apm_power_info *info)
@@ -706,6 +762,12 @@ static struct i2c_board_info __initdata zeus_i2c_devices[] = {
 };
 
 static mfp_cfg_t zeus_pin_config[] __initdata = {
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
 	GPIO15_nCS_1,
 	GPIO78_nCS_2,
 	GPIO80_nCS_4,
@@ -731,6 +793,11 @@ static mfp_cfg_t zeus_pin_config[] __initdata = {
 	GPIO104_CIF_DD_2,
 	GPIO105_CIF_DD_1,
 
+	GPIO81_SSP3_TXD,
+	GPIO82_SSP3_RXD,
+	GPIO83_SSP3_SFRM,
+	GPIO84_SSP3_SCLK,
+
 	GPIO48_nPOE,
 	GPIO49_nPWE,
 	GPIO50_nPIOR,
@@ -785,6 +852,8 @@ static void __init zeus_init(void)
 	pxa_set_ac97_info(&zeus_ac97_info);
 	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(zeus_i2c_devices));
+	pxa2xx_set_spi_info(3, &pxa2xx_spi_ssp3_master_info);
+	spi_register_board_info(zeus_spi_board_info, ARRAY_SIZE(zeus_spi_board_info));
 }
 
 static struct map_desc zeus_io_desc[] __initdata = {
@@ -807,12 +876,6 @@ static struct map_desc zeus_io_desc[] __initdata = {
 		.type    = MT_DEVICE,
 	},
 	{
-		.virtual = ZEUS_CPLD_EXTWDOG,
-		.pfn     = __phys_to_pfn(ZEUS_CPLD_EXTWDOG_PHYS),
-		.length  = 0x1000,
-		.type    = MT_DEVICE,
-	},
-	{
 		.virtual = ZEUS_PC104IO,
 		.pfn     = __phys_to_pfn(ZEUS_PC104IO_PHYS),
 		.length  = 0x00800000,
@@ -837,7 +900,7 @@ static void __init zeus_map_io(void)
 	PCFR = PCFR_OPDE | PCFR_DC_EN | PCFR_FS | PCFR_FP;
 }
 
-MACHINE_START(ARCOM_ZEUS, "Arcom ZEUS")
+MACHINE_START(ARCOM_ZEUS, "Arcom/Eurotech ZEUS")
 	/* Maintainer: Marc Zyngier <maz@misterjones.org> */
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= ((io_p2v(0x40000000) >> 18) & 0xfffc),
diff --git a/arch/arm/mach-rpc/include/mach/uncompress.h b/arch/arm/mach-rpc/include/mach/uncompress.h
index d5862368c4f2..8c9e2c7161c6 100644
--- a/arch/arm/mach-rpc/include/mach/uncompress.h
+++ b/arch/arm/mach-rpc/include/mach/uncompress.h
@@ -109,8 +109,6 @@ static inline void flush(void)
 {
 }
 
-static void error(char *x);
-
 /*
  * Setup for decompression
  */
diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index 63b753f56c64..0d8e043804c2 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -21,7 +21,7 @@
 #include <mach/dma.h>
 
 #include <plat/cpu.h>
-#include <plat/dma-plat.h>
+#include <plat/dma-s3c24xx.h>
 
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c
index b7d1f8d27bc2..a3f3c7b1ca38 100644
--- a/arch/arm/mach-s3c2410/h1940-bluetooth.c
+++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c
@@ -56,7 +56,7 @@ static const struct rfkill_ops h1940bt_rfkill_ops = {
 	.set_block = h1940bt_set_block,
 };
 
-static int __init h1940bt_probe(struct platform_device *pdev)
+static int __devinit h1940bt_probe(struct platform_device *pdev)
 {
 	struct rfkill *rfk;
 	int ret = 0;
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-core.h b/arch/arm/mach-s3c2410/include/mach/gpio-track.h
index f8b879a7973c..acb259103808 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio-core.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-track.h
@@ -15,7 +15,6 @@
 #ifndef __ASM_ARCH_GPIO_CORE_H
 #define __ASM_ARCH_GPIO_CORE_H __FILE__
 
-#include <plat/gpio-core.h>
 #include <mach/regs-gpio.h>
 
 extern struct s3c_gpio_chip s3c24xx_gpios[];
diff --git a/arch/arm/plat-s3c24xx/include/plat/pm-core.h b/arch/arm/mach-s3c2410/include/mach/pm-core.h
index fb45dd9adca5..70a83b209e25 100644
--- a/arch/arm/plat-s3c24xx/include/plat/pm-core.h
+++ b/arch/arm/mach-s3c2410/include/mach/pm-core.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c24xx/include/plat/pll.h
+/* linux/arch/arm/mach-s3c2410/include/pm-core.h
  *
  * Copyright 2008 Simtec Electronics
  *      Ben Dooks <ben@simtec.co.uk>
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
index ebc85c6dadbf..fd672f330bf2 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
@@ -406,31 +406,31 @@
 #define S3C2443_GPE5_SD1_CLK   (0x02 << 10)
 #define S3C2400_GPE5_EINT5     (0x02 << 10)
 #define S3C2400_GPE5_TCLK1     (0x03 << 10)
+#define S3C2443_GPE5_AC_BITCLK (0x03 << 10)
 
 #define S3C2410_GPE6_SDCMD     (0x02 << 12)
 #define S3C2443_GPE6_SD1_CMD   (0x02 << 12)
-#define S3C2443_GPE6_AC_BITCLK (0x03 << 12)
+#define S3C2443_GPE6_AC_SDI    (0x03 << 12)
 #define S3C2400_GPE6_EINT6     (0x02 << 12)
 
 #define S3C2410_GPE7_SDDAT0    (0x02 << 14)
 #define S3C2443_GPE5_SD1_DAT0  (0x02 << 14)
-#define S3C2443_GPE7_AC_SDI    (0x03 << 14)
+#define S3C2443_GPE7_AC_SDO    (0x03 << 14)
 #define S3C2400_GPE7_EINT7     (0x02 << 14)
 
 #define S3C2410_GPE8_SDDAT1    (0x02 << 16)
 #define S3C2443_GPE8_SD1_DAT1  (0x02 << 16)
-#define S3C2443_GPE8_AC_SDO    (0x03 << 16)
+#define S3C2443_GPE8_AC_SYNC   (0x03 << 16)
 #define S3C2400_GPE8_nXDACK0   (0x02 << 16)
 
 #define S3C2410_GPE9_SDDAT2    (0x02 << 18)
 #define S3C2443_GPE9_SD1_DAT2  (0x02 << 18)
-#define S3C2443_GPE9_AC_SYNC   (0x03 << 18)
+#define S3C2443_GPE9_AC_nRESET (0x03 << 18)
 #define S3C2400_GPE9_nXDACK1   (0x02 << 18)
 #define S3C2400_GPE9_nXBACK    (0x03 << 18)
 
 #define S3C2410_GPE10_SDDAT3   (0x02 << 20)
 #define S3C2443_GPE10_SD1_DAT3 (0x02 << 20)
-#define S3C2443_GPE10_AC_nRESET (0x03 << 20)
 #define S3C2400_GPE10_nXDREQ0  (0x02 << 20)
 
 #define S3C2410_GPE11_SPIMISO0 (0x02 << 22)
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
index 6026d091a2fe..d87ebe0cb625 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
@@ -42,23 +42,14 @@
 
 #define S3C2443_PLLCON_OFF		(1<<24)
 
-#define S3C2443_CLKSRC_I2S_EXT		(1<<14)
-#define S3C2443_CLKSRC_I2S_EPLLDIV	(0<<14)
-#define S3C2443_CLKSRC_I2S_EPLLREF	(2<<14)
-#define S3C2443_CLKSRC_I2S_EPLLREF3	(3<<14)
-#define S3C2443_CLKSRC_I2S_MASK		(3<<14)
-
 #define S3C2443_CLKSRC_EPLLREF_XTAL	(2<<7)
 #define S3C2443_CLKSRC_EPLLREF_EXTCLK	(3<<7)
 #define S3C2443_CLKSRC_EPLLREF_MPLLREF	(0<<7)
 #define S3C2443_CLKSRC_EPLLREF_MPLLREF2	(1<<7)
 #define S3C2443_CLKSRC_EPLLREF_MASK	(3<<7)
 
-#define S3C2443_CLKSRC_ESYSCLK_EPLL	(1<<6)
-#define S3C2443_CLKSRC_MSYSCLK_MPLL	(1<<4)
 #define S3C2443_CLKSRC_EXTCLK_DIV	(1<<3)
 
-#define S3C2443_CLKDIV0_DVS		(1<<13)
 #define S3C2443_CLKDIV0_HALF_HCLK	(1<<3)
 #define S3C2443_CLKDIV0_HALF_PCLK	(1<<2)
 
@@ -81,28 +72,7 @@
 #define S3C2443_CLKDIV0_ARMDIV_12	(13<<9)
 #define S3C2443_CLKDIV0_ARMDIV_16	(15<<9)
 
-/* S3C2443_CLKDIV1 */
-
-#define S3C2443_CLKDIV1_CAMDIV_MASK	(15<<26)
-#define S3C2443_CLKDIV1_CAMDIV_SHIFT	(26)
-
-#define S3C2443_CLKDIV1_HSSPIDIV_MASK	(3<<24)
-#define S3C2443_CLKDIV1_HSSPIDIV_SHIFT	(24)
-
-#define S3C2443_CLKDIV1_DISPDIV_MASK	(0xff<<16)
-#define S3C2443_CLKDIV1_DISPDIV_SHIFT	(16)
-
-#define S3C2443_CLKDIV1_I2SDIV_MASK	(15<<12)
-#define S3C2443_CLKDIV1_I2SDIV_SHIFT	(12)
-
-#define S3C2443_CLKDIV1_UARTDIV_MASK	(15<<8)
-#define S3C2443_CLKDIV1_UARTDIV_SHIFT	(8)
-
-#define S3C2443_CLKDIV1_HSMMCDIV_MASK	(3<<6)
-#define S3C2443_CLKDIV1_HSMMCDIV_SHIFT	(6)
-
-#define S3C2443_CLKDIV1_USBHOSTDIV_MASK	(3<<4)
-#define S3C2443_CLKDIV1_USBHOSTDIV_SHIFT (4)
+/* S3C2443_CLKDIV1 removed, only used in clock.c code */
 
 #define S3C2443_CLKCON_NAND
 
diff --git a/arch/arm/mach-s3c2410/include/mach/spi-gpio.h b/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
index 980a099e209c..dcef2287cb38 100644
--- a/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
@@ -3,7 +3,7 @@
  * Copyright (c) 2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * S3C2410 - SPI Controller platfrom_device info
+ * S3C2410 - SPI Controller platform_device info
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/plat-s3c/include/mach/timex.h b/arch/arm/mach-s3c2410/include/mach/timex.h
index 2a425ed0a7e0..fe9ca1ffd51b 100644
--- a/arch/arm/plat-s3c/include/mach/timex.h
+++ b/arch/arm/mach-s3c2410/include/mach/timex.h
@@ -19,8 +19,6 @@
  * for the time conversion functions to/from jiffies is acceptable.
 */
 
-
 #define CLOCK_TICK_RATE 12000000
 
-
 #endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/plat-s3c/include/mach/vmalloc.h b/arch/arm/mach-s3c2410/include/mach/vmalloc.h
index 299d95f365c9..315b0078a34d 100644
--- a/arch/arm/plat-s3c/include/mach/vmalloc.h
+++ b/arch/arm/mach-s3c2410/include/mach/vmalloc.h
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c/include/mach/vmalloc.h
+/* arch/arm/mach-s3c2410/include/mach/vmalloc.h
  *
  * from arch/arm/mach-iop3xx/include/mach/vmalloc.h
  *
@@ -15,6 +15,6 @@
 #ifndef __ASM_ARCH_VMALLOC_H
 #define __ASM_ARCH_VMALLOC_H
 
-#define VMALLOC_END	  (0xe0000000UL)
+#define VMALLOC_END	  (0xE0000000)
 
 #endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c
index 06a84adfb13f..7047317ed7f4 100644
--- a/arch/arm/mach-s3c2410/mach-amlm5900.c
+++ b/arch/arm/mach-s3c2410/mach-amlm5900.c
@@ -153,7 +153,7 @@ static struct platform_device *amlm5900_devices[] __initdata = {
 	&s3c_device_adc,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
-	&s3c_device_usb,
+	&s3c_device_ohci,
  	&s3c_device_rtc,
 	&s3c_device_usbgadget,
         &s3c_device_sdi,
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 97162fdd0590..02b1b6220cba 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -584,7 +584,7 @@ static struct s3c_hwmon_pdata bast_hwmon_info = {
 // cat /sys/devices/platform/s3c24xx-adc/s3c-hwmon/in_0
 
 static struct platform_device *bast_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 1e34abe1a19e..fbedd0760941 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -196,7 +196,7 @@ static struct platform_device h1940_device_bluetooth = {
 	.id               = -1,
 };
 
-static struct s3c24xx_mci_pdata h1940_mmc_cfg = {
+static struct s3c24xx_mci_pdata h1940_mmc_cfg __initdata = {
 	.gpio_detect   = S3C2410_GPF(5),
 	.gpio_wprotect = S3C2410_GPH(8),
 	.set_power     = NULL,
@@ -272,7 +272,7 @@ static struct platform_device h1940_lcd_powerdev = {
 
 static struct platform_device *h1940_devices[] __initdata = {
 	&s3c_device_ts,
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
@@ -311,12 +311,11 @@ static void __init h1940_init(void)
 	u32 tmp;
 
 	s3c24xx_fb_set_platdata(&h1940_fb_info);
+	s3c24xx_mci_set_platdata(&h1940_mmc_cfg);
  	s3c24xx_udc_set_platdata(&h1940_udc_cfg);
 	s3c24xx_ts_set_platdata(&h1940_ts_cfg);
 	s3c_i2c0_set_platdata(NULL);
 
-	s3c_device_sdi.dev.platform_data = &h1940_mmc_cfg;
-
 	/* Turn off suspend on both USB ports, and switch the
 	 * selectable USB port to USB device mode. */
 
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 0405712c2263..684710f88142 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -322,7 +322,7 @@ static struct platform_device *n30_devices[] __initdata = {
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
 	&s3c_device_iis,
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_usbgadget,
 	&n30_button_device,
 	&n30_blue_led,
diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c
index f6c7261a4a12..d8c7f2efc1a7 100644
--- a/arch/arm/mach-s3c2410/mach-otom.c
+++ b/arch/arm/mach-s3c2410/mach-otom.c
@@ -92,7 +92,7 @@ static struct platform_device otom_device_nor = {
 /* Standard OTOM devices */
 
 static struct platform_device *otom11_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index ab092bcda393..92a4ec375d82 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -246,7 +246,7 @@ static struct platform_device qt2410_spi = {
 /* Board devices */
 
 static struct platform_device *qt2410_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c
index c49126ccb1d5..452223042201 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2410.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2410.c
@@ -87,7 +87,7 @@ static struct s3c2410_uartcfg smdk2410_uartcfgs[] __initdata = {
 };
 
 static struct platform_device *smdk2410_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c2410/mach-tct_hammer.c
index 8fdb0430bd48..929164a8e9b1 100644
--- a/arch/arm/mach-s3c2410/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c2410/mach-tct_hammer.c
@@ -129,7 +129,7 @@ static struct platform_device *tct_hammer_devices[] __initdata = {
 	&s3c_device_adc,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_rtc,
 	&s3c_device_usbgadget,
 	&s3c_device_sdi,
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 0d61fb577170..9051f0d31123 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -334,7 +334,7 @@ static struct i2c_board_info vr1000_i2c_devs[] __initdata = {
 /* devices for this board */
 
 static struct platform_device *vr1000_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index 6b9d0d83a6f9..29bd3d987bec 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -91,7 +91,7 @@ static void usb_simtec_enableoc(struct s3c2410_hcd_info *info, int on)
 	}
 }
 
-static struct s3c2410_hcd_info usb_simtec_info = {
+static struct s3c2410_hcd_info usb_simtec_info __initdata = {
 	.port[0]	= {
 		.flags	= S3C_HCDFLG_USED
 	},
@@ -127,6 +127,6 @@ int usb_simtec_init(void)
 	gpio_direction_output(S3C2410_GPB(4), 1);
 	gpio_direction_input(S3C2410_GPG(10));
 
-	s3c_device_usb.dev.platform_data = &usb_simtec_info;
+	s3c_ohci_set_platdata(&usb_simtec_info);
 	return 0;
 }
diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c2412/clock.c
index a037df5e1c2d..0c0505b025cb 100644
--- a/arch/arm/mach-s3c2412/clock.c
+++ b/arch/arm/mach-s3c2412/clock.c
@@ -124,7 +124,9 @@ static struct clk clk_usysclk = {
 	.name		= "usysclk",
 	.id		= -1,
 	.parent		= &clk_xtal,
-	.set_parent	= s3c2412_setparent_usysclk,
+	.ops		= &(struct clk_ops) {
+		.set_parent	= s3c2412_setparent_usysclk,
+	},
 };
 
 static struct clk clk_mrefclk = {
@@ -199,10 +201,12 @@ static int s3c2412_setrate_usbsrc(struct clk *clk, unsigned long rate)
 static struct clk clk_usbsrc = {
 	.name		= "usbsrc",
 	.id		= -1,
-	.get_rate	= s3c2412_getrate_usbsrc,
-	.set_rate	= s3c2412_setrate_usbsrc,
-	.round_rate	= s3c2412_roundrate_usbsrc,
-	.set_parent	= s3c2412_setparent_usbsrc,
+	.ops		= &(struct clk_ops) {
+		.get_rate	= s3c2412_getrate_usbsrc,
+		.set_rate	= s3c2412_setrate_usbsrc,
+		.round_rate	= s3c2412_roundrate_usbsrc,
+		.set_parent	= s3c2412_setparent_usbsrc,
+	},
 };
 
 static int s3c2412_setparent_msysclk(struct clk *clk, struct clk *parent)
@@ -225,7 +229,9 @@ static int s3c2412_setparent_msysclk(struct clk *clk, struct clk *parent)
 static struct clk clk_msysclk = {
 	.name		= "msysclk",
 	.id		= -1,
-	.set_parent	= s3c2412_setparent_msysclk,
+	.ops		= &(struct clk_ops) {
+		.set_parent	= s3c2412_setparent_msysclk,
+	},
 };
 
 static int s3c2412_setparent_armclk(struct clk *clk, struct clk *parent)
@@ -264,7 +270,9 @@ static struct clk clk_armclk = {
 	.name		= "armclk",
 	.id		= -1,
 	.parent		= &clk_msysclk,
-	.set_parent	= s3c2412_setparent_armclk,
+	.ops		= &(struct clk_ops) {
+		.set_parent	= s3c2412_setparent_armclk,
+	},
 };
 
 /* these next clocks have an divider immediately after them,
@@ -337,10 +345,12 @@ static int s3c2412_setrate_uart(struct clk *clk, unsigned long rate)
 static struct clk clk_uart = {
 	.name		= "uartclk",
 	.id		= -1,
-	.get_rate	= s3c2412_getrate_uart,
-	.set_rate	= s3c2412_setrate_uart,
-	.set_parent	= s3c2412_setparent_uart,
-	.round_rate	= s3c2412_roundrate_clksrc,
+	.ops		= &(struct clk_ops) {
+		.get_rate	= s3c2412_getrate_uart,
+		.set_rate	= s3c2412_setrate_uart,
+		.set_parent	= s3c2412_setparent_uart,
+		.round_rate	= s3c2412_roundrate_clksrc,
+	},
 };
 
 static int s3c2412_setparent_i2s(struct clk *clk, struct clk *parent)
@@ -388,10 +398,12 @@ static int s3c2412_setrate_i2s(struct clk *clk, unsigned long rate)
 static struct clk clk_i2s = {
 	.name		= "i2sclk",
 	.id		= -1,
-	.get_rate	= s3c2412_getrate_i2s,
-	.set_rate	= s3c2412_setrate_i2s,
-	.set_parent	= s3c2412_setparent_i2s,
-	.round_rate	= s3c2412_roundrate_clksrc,
+	.ops		= &(struct clk_ops) {
+		.get_rate	= s3c2412_getrate_i2s,
+		.set_rate	= s3c2412_setrate_i2s,
+		.set_parent	= s3c2412_setparent_i2s,
+		.round_rate	= s3c2412_roundrate_clksrc,
+	},
 };
 
 static int s3c2412_setparent_cam(struct clk *clk, struct clk *parent)
@@ -438,10 +450,12 @@ static int s3c2412_setrate_cam(struct clk *clk, unsigned long rate)
 static struct clk clk_cam = {
 	.name		= "camif-upll",	/* same as 2440 name */
 	.id		= -1,
-	.get_rate	= s3c2412_getrate_cam,
-	.set_rate	= s3c2412_setrate_cam,
-	.set_parent	= s3c2412_setparent_cam,
-	.round_rate	= s3c2412_roundrate_clksrc,
+	.ops		= &(struct clk_ops) {
+		.get_rate	= s3c2412_getrate_cam,
+		.set_rate	= s3c2412_setrate_cam,
+		.set_parent	= s3c2412_setparent_cam,
+		.round_rate	= s3c2412_roundrate_clksrc,
+	},
 };
 
 /* standard clock definitions */
diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c
index f8d16fc10bc6..e880524904eb 100644
--- a/arch/arm/mach-s3c2412/dma.c
+++ b/arch/arm/mach-s3c2412/dma.c
@@ -20,7 +20,7 @@
 
 #include <mach/dma.h>
 
-#include <plat/dma-plat.h>
+#include <plat/dma-s3c24xx.h>
 #include <plat/cpu.h>
 
 #include <plat/regs-serial.h>
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index c9fa3fca486c..14f4798291aa 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -468,7 +468,7 @@ static struct i2c_board_info jive_i2c_devs[] __initdata = {
 /* The platform devices being used. */
 
 static struct platform_device *jive_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_rtc,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index 9a5e43419722..0392065af1af 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -104,8 +104,7 @@ static struct s3c2410_udc_mach_info smdk2413_udc_cfg __initdata = {
 
 
 static struct platform_device *smdk2413_devices[] __initdata = {
-	&s3c_device_usb,
-	//&s3c_device_lcd,
+	&s3c_device_ohci,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
 	&s3c_device_iis,
diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c
index a6ba591b26bb..3ca9265b6997 100644
--- a/arch/arm/mach-s3c2412/mach-vstms.c
+++ b/arch/arm/mach-s3c2412/mach-vstms.c
@@ -121,7 +121,7 @@ static struct s3c2410_platform_nand __initdata vstms_nand_info = {
 };
 
 static struct platform_device *vstms_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
 	&s3c_device_iis,
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index 80879358eb2f..7f465265cf04 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -15,14 +15,67 @@ config CPU_S3C2440
 	help
 	  Support for S3C2440 Samsung Mobile CPU based systems.
 
+config CPU_S3C2442
+	bool
+	depends on ARCH_S3C2410
+	select CPU_ARM920T
+	select S3C2410_CLOCK
+	select S3C2410_GPIO
+	select S3C2410_PM if PM
+	select CPU_S3C244X
+	select CPU_LLSERIAL_S3C2440
+	help
+	  Support for S3C2442 Samsung Mobile CPU based systems.
+
+config CPU_S3C244X
+	bool
+	depends on ARCH_S3C2410 && (CPU_S3C2440 || CPU_S3C2442)
+	help
+	  Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
+
+
+
+config S3C2440_CPUFREQ
+	bool "S3C2440/S3C2442 CPU Frequency scaling support"
+	depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
+	select S3C2410_CPUFREQ_UTILS
+	default y
+	help
+	  CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
+
+config S3C2440_XTAL_12000000
+	bool
+	help
+	  Indicate that the build needs to support 12MHz system
+	  crystal.
+
+config S3C2440_XTAL_16934400
+	bool
+	help
+	  Indicate that the build needs to support 16.9344MHz system
+	  crystal.
+
+config S3C2440_PLL_12000000
+	bool
+	depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000
+	default y if CPU_FREQ_S3C24XX_PLL
+	help
+	  PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
+
+config S3C2440_PLL_16934400
+	bool
+	depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400
+	default y if CPU_FREQ_S3C24XX_PLL
+	help
+	  PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
+
 config S3C2440_DMA
 	bool
 	depends on ARCH_S3C2410 && CPU_S3C24405B
 	help
 	  Support for S3C2440 specific DMA code5A
 
-
-menu "S3C2440 Machines"
+menu "S3C2440 and S3C2442 Machines"
 
 config MACH_ANUBIS
 	bool "Simtec Electronics ANUBIS"
@@ -37,6 +90,18 @@ config MACH_ANUBIS
 	  Say Y here if you are using the Simtec Electronics ANUBIS
 	  development system
 
+config MACH_NEO1973_GTA02
+	bool "Openmoko GTA02 / Freerunner phone"
+	select CPU_S3C2442
+	select MFD_PCF50633
+	select PCF50633_GPIO
+	select I2C
+	select POWER_SUPPLY
+	select MACH_NEO1973
+	select S3C2410_PWM
+	help
+	   Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
+
 config MACH_OSIRIS
 	bool "Simtec IM2440D20 (OSIRIS) module"
 	select CPU_S3C2440
@@ -94,11 +159,14 @@ config MACH_NEXCODER_2440
 
 config SMDK2440_CPU2440
 	bool "SMDK2440 with S3C2440 CPU module"
-	depends on ARCH_S3C2440
 	default y if ARCH_S3C2440
 	select S3C2440_XTAL_16934400
 	select CPU_S3C2440
 
+config SMDK2440_CPU2442
+	bool "SMDM2440 with S3C2442 CPU module"
+	select CPU_S3C2442
+
 config MACH_AT2440EVB
 	bool "Avantech AT2440EVB development board"
 	select CPU_S3C2440
diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile
index 5f3224531885..c85ba32d8956 100644
--- a/arch/arm/mach-s3c2440/Makefile
+++ b/arch/arm/mach-s3c2440/Makefile
@@ -10,10 +10,20 @@ obj-n				:=
 obj-				:=
 
 obj-$(CONFIG_CPU_S3C2440)	+= s3c2440.o dsc.o
+obj-$(CONFIG_CPU_S3C2442)	+= s3c2442.o
+
 obj-$(CONFIG_CPU_S3C2440)	+= irq.o
 obj-$(CONFIG_CPU_S3C2440)	+= clock.o
 obj-$(CONFIG_S3C2440_DMA)	+= dma.o
 
+obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o
+obj-$(CONFIG_CPU_S3C244X)	+= s3c244x-irq.o
+obj-$(CONFIG_CPU_S3C244X)	+= s3c244x-clock.o
+obj-$(CONFIG_S3C2440_CPUFREQ)	+= s3c2440-cpufreq.o
+
+obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o
+obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o
+
 # Machine support
 
 obj-$(CONFIG_MACH_ANUBIS)	+= mach-anubis.o
@@ -23,6 +33,7 @@ obj-$(CONFIG_ARCH_S3C2440)	+= mach-smdk2440.o
 obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
 obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o
 obj-$(CONFIG_MACH_MINI2440) += mach-mini2440.o
+obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
 
 # extra machine support
 
diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c2440/clock.c
index d1c29b2537cd..3dc2426e2345 100644
--- a/arch/arm/mach-s3c2440/clock.c
+++ b/arch/arm/mach-s3c2440/clock.c
@@ -98,8 +98,10 @@ static struct clk s3c2440_clk_cam = {
 static struct clk s3c2440_clk_cam_upll = {
 	.name		= "camif-upll",
 	.id		= -1,
-	.set_rate	= s3c2440_camif_upll_setrate,
-	.round_rate	= s3c2440_camif_upll_round,
+	.ops		= &(struct clk_ops) {
+		.set_rate	= s3c2440_camif_upll_setrate,
+		.round_rate	= s3c2440_camif_upll_round,
+	},
 };
 
 static struct clk s3c2440_clk_ac97 = {
diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c
index e08e081430f0..3b0529f54e9c 100644
--- a/arch/arm/mach-s3c2440/dma.c
+++ b/arch/arm/mach-s3c2440/dma.c
@@ -20,7 +20,7 @@
 #include <mach/map.h>
 #include <mach/dma.h>
 
-#include <plat/dma-plat.h>
+#include <plat/dma-s3c24xx.h>
 #include <plat/cpu.h>
 
 #include <plat/regs-serial.h>
diff --git a/arch/arm/mach-s3c2440/dsc.c b/arch/arm/mach-s3c2440/dsc.c
index 554044272771..9ea66e31f626 100644
--- a/arch/arm/mach-s3c2440/dsc.c
+++ b/arch/arm/mach-s3c2440/dsc.c
@@ -28,7 +28,7 @@
 #include <mach/regs-dsc.h>
 
 #include <plat/cpu.h>
-#include <plat/s3c2440.h>
+#include <plat/s3c244x.h>
 
 int s3c2440_set_dsc(unsigned int pin, unsigned int value)
 {
diff --git a/arch/arm/mach-s3c2442/include/mach/gta02.h b/arch/arm/mach-s3c2440/include/mach/gta02.h
index 953331d8d56a..953331d8d56a 100644
--- a/arch/arm/mach-s3c2442/include/mach/gta02.h
+++ b/arch/arm/mach-s3c2440/include/mach/gta02.h
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index 62a4c3eba97f..b73f78a9da5c 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -409,7 +409,7 @@ static struct platform_device anubis_device_sm501 = {
 /* Standard Anubis devices */
 
 static struct platform_device *anubis_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_wdt,
 	&s3c_device_adc,
 	&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index aa69290e04c6..84725791e6bf 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -165,7 +165,7 @@ static struct platform_device at2440evb_device_eth = {
 	},
 };
 
-static struct s3c24xx_mci_pdata at2440evb_mci_pdata = {
+static struct s3c24xx_mci_pdata at2440evb_mci_pdata __initdata = {
 	.gpio_detect	= S3C2410_GPG(10),
 };
 
@@ -203,7 +203,7 @@ static struct s3c2410fb_mach_info at2440evb_fb_info __initdata = {
 };
 
 static struct platform_device *at2440evb_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_wdt,
 	&s3c_device_adc,
 	&s3c_device_i2c0,
@@ -216,8 +216,6 @@ static struct platform_device *at2440evb_devices[] __initdata = {
 
 static void __init at2440evb_map_io(void)
 {
-	s3c_device_sdi.dev.platform_data = &at2440evb_mci_pdata;
-
 	s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc));
 	s3c24xx_init_clocks(16934400);
 	s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs));
@@ -226,6 +224,7 @@ static void __init at2440evb_map_io(void)
 static void __init at2440evb_init(void)
 {
 	s3c24xx_fb_set_platdata(&at2440evb_fb_info);
+	s3c24xx_mci_set_platdata(&at2440evb_mci_pdata);
 	s3c_nand_set_platdata(&at2440evb_nand_info);
 	s3c_i2c0_set_platdata(NULL);
 
diff --git a/arch/arm/mach-s3c2442/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
index 0b4a3a03071f..45799c608d8f 100644
--- a/arch/arm/mach-s3c2442/mach-gta02.c
+++ b/arch/arm/mach-s3c2440/mach-gta02.c
@@ -544,7 +544,7 @@ static struct platform_device gta02_bl_dev = {
 
 
 /* USB */
-static struct s3c2410_hcd_info gta02_usb_info = {
+static struct s3c2410_hcd_info gta02_usb_info __initdata = {
 	.port[0]	= {
 		.flags	= S3C_HCDFLG_USED,
 	},
@@ -565,7 +565,7 @@ static void __init gta02_map_io(void)
 /* These are the guys that don't need to be children of PMU. */
 
 static struct platform_device *gta02_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_wdt,
 	&s3c_device_sdi,
 	&s3c_device_usbgadget,
@@ -623,9 +623,8 @@ static void __init gta02_machine_init(void)
 	INIT_DELAYED_WORK(&gta02_charger_work, gta02_charger_worker);
 #endif
 
-	s3c_device_usb.dev.platform_data = &gta02_usb_info;
-
 	s3c24xx_udc_set_platdata(&gta02_udc_cfg);
+	s3c_ohci_set_platdata(&gta02_usb_info);
 	s3c_nand_set_platdata(&gta02_nand_info);
 	s3c_i2c0_set_platdata(NULL);
 
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index 2068e9096a43..571b17683d96 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -506,9 +506,8 @@ static struct i2c_board_info mini2440_i2c_devs[] __initdata = {
 };
 
 static struct platform_device *mini2440_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_wdt,
-/*	&s3c_device_adc,*/ /* ADC doesn't like living with touchscreen ! */
 	&s3c_device_i2c0,
 	&s3c_device_rtc,
 	&s3c_device_usbgadget,
@@ -522,8 +521,6 @@ static struct platform_device *mini2440_devices[] __initdata = {
 	&s3c_device_sdi,
 	&s3c_device_iis,
 	&mini2440_audio,
-/*	&s3c_device_timer[0],*/	/* buzzer pwm, no API for it */
-	/* remaining devices are optional */
 };
 
 static void __init mini2440_map_io(void)
@@ -531,8 +528,6 @@ static void __init mini2440_map_io(void)
 	s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc));
 	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs));
-
-	s3c_device_sdi.dev.platform_data = &mini2440_mmc_cfg;
 }
 
 /*
@@ -678,6 +673,7 @@ static void __init mini2440_init(void)
 	}
 
 	s3c24xx_udc_set_platdata(&mini2440_udc_cfg);
+	s3c24xx_mci_set_platdata(&mini2440_mmc_cfg);
 	s3c_nand_set_platdata(&mini2440_nand_info);
 	s3c_i2c0_set_platdata(NULL);
 
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index d43edede590e..342041593f22 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -41,7 +41,7 @@
 #include <plat/iic.h>
 
 #include <plat/s3c2410.h>
-#include <plat/s3c2440.h>
+#include <plat/s3c244x.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
@@ -106,7 +106,7 @@ static struct platform_device nexcoder_device_nor = {
 /* Standard Nexcoder devices */
 
 static struct platform_device *nexcoder_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index a952a13afb1f..1e836e506f8b 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -176,7 +176,7 @@ static struct s3c2410_platform_nand __initdata rx3715_nand_info = {
 };
 
 static struct platform_device *rx3715_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
index ec13e748ccc5..3ac3d636d615 100644
--- a/arch/arm/mach-s3c2440/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2440/mach-smdk2440.c
@@ -40,7 +40,7 @@
 #include <plat/iic.h>
 
 #include <plat/s3c2410.h>
-#include <plat/s3c2440.h>
+#include <plat/s3c244x.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
@@ -150,7 +150,7 @@ static struct s3c2410fb_mach_info smdk2440_fb_info __initdata = {
 };
 
 static struct platform_device *smdk2440_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
diff --git a/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c b/arch/arm/mach-s3c2440/s3c2440-cpufreq.c
index 976002fb1b8f..976002fb1b8f 100644
--- a/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
+++ b/arch/arm/mach-s3c2440/s3c2440-cpufreq.c
diff --git a/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c b/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c
index 49f65032f2c0..f105d5e8c477 100644
--- a/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
+++ b/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
+/* arch/arm/mach-s3c2440/s3c2440-pll-12000000.c
  *
  * Copyright (c) 2006-2007 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
diff --git a/arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c b/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c
index 7679af13a94d..c8a8f90ef382 100644
--- a/arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c
+++ b/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c
+/* arch/arm/mach-s3c2440/s3c2440-pll-16934400.c
  *
  * Copyright (c) 2006-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c
index ac1f7ea5f405..2b68f7ea45ae 100644
--- a/arch/arm/mach-s3c2440/s3c2440.c
+++ b/arch/arm/mach-s3c2440/s3c2440.c
@@ -29,9 +29,9 @@
 #include <mach/hardware.h>
 #include <asm/irq.h>
 
-#include <plat/s3c2440.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/s3c244x.h>
 
 static struct sys_device s3c2440_sysdev = {
 	.cls		= &s3c2440_sysclass,
diff --git a/arch/arm/mach-s3c2442/clock.c b/arch/arm/mach-s3c2440/s3c2442.c
index ea1aa1f5157a..188ad1e57dc0 100644
--- a/arch/arm/mach-s3c2442/clock.c
+++ b/arch/arm/mach-s3c2440/s3c2442.c
@@ -1,10 +1,10 @@
-/* linux/arch/arm/mach-s3c2442/clock.c
+/* linux/arch/arm/mach-s3c2442/s3c2442.c
  *
  * Copyright (c) 2004-2005 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * S3C2442 Clock support
+ * S3C2442 core and lock support
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -109,8 +109,10 @@ static struct clk s3c2442_clk_cam = {
 static struct clk s3c2442_clk_cam_upll = {
 	.name		= "camif-upll",
 	.id		= -1,
-	.set_rate	= s3c2442_camif_upll_setrate,
-	.round_rate	= s3c2442_camif_upll_round,
+	.ops		= &(struct clk_ops) {
+		.set_rate	= s3c2442_camif_upll_setrate,
+		.round_rate	= s3c2442_camif_upll_round,
+	},
 };
 
 static int s3c2442_clk_add(struct sys_device *sysdev)
@@ -149,3 +151,15 @@ static __init int s3c2442_clk_init(void)
 }
 
 arch_initcall(s3c2442_clk_init);
+
+
+static struct sys_device s3c2442_sysdev = {
+	.cls		= &s3c2442_sysclass,
+};
+
+int __init s3c2442_init(void)
+{
+	printk("S3C2442: Initialising architecture\n");
+
+	return sysdev_register(&s3c2442_sysdev);
+}
diff --git a/arch/arm/plat-s3c24xx/s3c244x-clock.c b/arch/arm/mach-s3c2440/s3c244x-clock.c
index 79371091aa38..f8d96130d1d1 100644
--- a/arch/arm/plat-s3c24xx/s3c244x-clock.c
+++ b/arch/arm/mach-s3c2440/s3c244x-clock.c
@@ -68,7 +68,9 @@ static int s3c2440_setparent_armclk(struct clk *clk, struct clk *parent)
 static struct clk clk_arm = {
 	.name		= "armclk",
 	.id		= -1,
-	.set_parent	= s3c2440_setparent_armclk,
+	.ops		= &(struct clk_ops) {
+		.set_parent	= s3c2440_setparent_armclk,
+	},
 };
 
 static int s3c244x_clk_add(struct sys_device *sysdev)
diff --git a/arch/arm/plat-s3c24xx/s3c244x-irq.c b/arch/arm/mach-s3c2440/s3c244x-irq.c
index a75c0c2431ea..a75c0c2431ea 100644
--- a/arch/arm/plat-s3c24xx/s3c244x-irq.c
+++ b/arch/arm/mach-s3c2440/s3c244x-irq.c
diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/mach-s3c2440/s3c244x.c
index 12623a474b54..5e4a97e76533 100644
--- a/arch/arm/plat-s3c24xx/s3c244x.c
+++ b/arch/arm/mach-s3c2440/s3c244x.c
@@ -38,8 +38,7 @@
 #include <mach/regs-dsc.h>
 
 #include <plat/s3c2410.h>
-#include <plat/s3c2440.h>
-#include "s3c244x.h"
+#include <plat/s3c244x.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c2442/Kconfig b/arch/arm/mach-s3c2442/Kconfig
deleted file mode 100644
index 8d3811852fc7..000000000000
--- a/arch/arm/mach-s3c2442/Kconfig
+++ /dev/null
@@ -1,37 +0,0 @@
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-config CPU_S3C2442
-	bool
-	depends on ARCH_S3C2410
-	select CPU_ARM920T
-	select S3C2410_CLOCK
-	select S3C2410_GPIO
-	select S3C2410_PM if PM
-	select CPU_S3C244X
-	select CPU_LLSERIAL_S3C2440
-	help
-	  Support for S3C2442 Samsung Mobile CPU based systems.
-
-
-menu "S3C2442 Machines"
-
-config SMDK2440_CPU2442
-	bool "SMDM2440 with S3C2442 CPU module"
-	depends on ARCH_S3C2440
-	select CPU_S3C2442
-
-config MACH_NEO1973_GTA02
-	bool "Openmoko GTA02 / Freerunner phone"
-	select CPU_S3C2442
-	select MFD_PCF50633
-	select PCF50633_GPIO
-	select I2C
-	select POWER_SUPPLY
-	select MACH_NEO1973
-	select S3C2410_PWM
-	help
-	   Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
-
-endmenu
diff --git a/arch/arm/mach-s3c2442/Makefile b/arch/arm/mach-s3c2442/Makefile
deleted file mode 100644
index 2a19113a5769..000000000000
--- a/arch/arm/mach-s3c2442/Makefile
+++ /dev/null
@@ -1,18 +0,0 @@
-# arch/arm/mach-s3c2442/Makefile
-#
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:=
-obj-				:=
-
-obj-$(CONFIG_CPU_S3C2442)	+= s3c2442.o
-obj-$(CONFIG_CPU_S3C2442)	+= clock.o
-
-obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
-
-# Machine support
-
diff --git a/arch/arm/mach-s3c2442/s3c2442.c b/arch/arm/mach-s3c2442/s3c2442.c
deleted file mode 100644
index 4663bdc7fff6..000000000000
--- a/arch/arm/mach-s3c2442/s3c2442.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/* linux/arch/arm/mach-s3c2442/s3c2442.c
- *
- * Copyright (c) 2006 Simtec Electronics
- *   Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C2442 Mobile CPU support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/sysdev.h>
-
-#include <plat/s3c2442.h>
-#include <plat/cpu.h>
-
-static struct sys_device s3c2442_sysdev = {
-	.cls		= &s3c2442_sysclass,
-};
-
-int __init s3c2442_init(void)
-{
-	printk("S3C2442: Initialising architecture\n");
-
-	return sysdev_register(&s3c2442_sysdev);
-}
diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig
index 4314c4424909..698140af247c 100644
--- a/arch/arm/mach-s3c2443/Kconfig
+++ b/arch/arm/mach-s3c2443/Kconfig
@@ -7,6 +7,7 @@ config CPU_S3C2443
 	depends on ARCH_S3C2410
 	select S3C2443_DMA if S3C2410_DMA
 	select CPU_LLSERIAL_S3C2440
+	select SAMSUNG_CLKSRC
 	help
 	  Support for the S3C2443 SoC from the S3C24XX line
 
diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
index 2785d69c95b0..62cd4eaee01b 100644
--- a/arch/arm/mach-s3c2443/clock.c
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2443/clock.c
  *
- * Copyright (c) 2007 Simtec Electronics
+ * Copyright (c) 2007, 2010 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * S3C2443 Clock control support
@@ -42,6 +42,7 @@
 
 #include <plat/s3c2443.h>
 #include <plat/clock.h>
+#include <plat/clock-clksrc.h>
 #include <plat/cpu.h>
 
 /* We currently have to assume that the system is running
@@ -53,141 +54,69 @@
  * set the correct muxing at initialisation
 */
 
-static int s3c2443_clkcon_enable_h(struct clk *clk, int enable)
-{
-	unsigned int clocks = clk->ctrlbit;
-	unsigned long clkcon;
-
-	clkcon = __raw_readl(S3C2443_HCLKCON);
-
-	if (enable)
-		clkcon |= clocks;
-	else
-		clkcon &= ~clocks;
-
-	__raw_writel(clkcon, S3C2443_HCLKCON);
-
-	return 0;
-}
-
-static int s3c2443_clkcon_enable_p(struct clk *clk, int enable)
+static int s3c2443_gate(void __iomem *reg, struct clk *clk, int enable)
 {
-	unsigned int clocks = clk->ctrlbit;
-	unsigned long clkcon;
-
-	clkcon = __raw_readl(S3C2443_PCLKCON);
+	u32 ctrlbit = clk->ctrlbit;
+	u32 con = __raw_readl(reg);
 
 	if (enable)
-		clkcon |= clocks;
+		con |= ctrlbit;
 	else
-		clkcon &= ~clocks;
-
-	__raw_writel(clkcon, S3C2443_PCLKCON);
+		con &= ~ctrlbit;
 
+	__raw_writel(con, reg);
 	return 0;
 }
 
-static int s3c2443_clkcon_enable_s(struct clk *clk, int enable)
-{
-	unsigned int clocks = clk->ctrlbit;
-	unsigned long clkcon;
-
-	clkcon = __raw_readl(S3C2443_SCLKCON);
-
-	if (enable)
-		clkcon |= clocks;
-	else
-		clkcon &= ~clocks;
-
-	__raw_writel(clkcon, S3C2443_SCLKCON);
-
-	return 0;
-}
-
-static unsigned long s3c2443_roundrate_clksrc(struct clk *clk,
-					      unsigned long rate,
-					      unsigned int max)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	int div;
-
-	if (rate > parent_rate)
-		return parent_rate;
-
-	/* note, we remove the +/- 1 calculations as they cancel out */
-
-	div = (rate / parent_rate);
-
-	if (div < 1)
-		div = 1;
-	else if (div > max)
-		div = max;
-
-	return parent_rate / div;
-}
-
-static unsigned long s3c2443_roundrate_clksrc4(struct clk *clk,
-					       unsigned long rate)
+static int s3c2443_clkcon_enable_h(struct clk *clk, int enable)
 {
-	return s3c2443_roundrate_clksrc(clk, rate, 4);
+	return s3c2443_gate(S3C2443_HCLKCON, clk, enable);
 }
 
-static unsigned long s3c2443_roundrate_clksrc16(struct clk *clk,
-						unsigned long rate)
+static int s3c2443_clkcon_enable_p(struct clk *clk, int enable)
 {
-	return s3c2443_roundrate_clksrc(clk, rate, 16);
+	return s3c2443_gate(S3C2443_PCLKCON, clk, enable);
 }
 
-static unsigned long s3c2443_roundrate_clksrc256(struct clk *clk,
-						 unsigned long rate)
+static int s3c2443_clkcon_enable_s(struct clk *clk, int enable)
 {
-	return s3c2443_roundrate_clksrc(clk, rate, 256);
+	return s3c2443_gate(S3C2443_SCLKCON, clk, enable);
 }
 
 /* clock selections */
 
+/* mpllref is a direct descendant of clk_xtal by default, but it is not
+ * elided as the EPLL can be either sourced by the XTAL or EXTCLK and as
+ * such directly equating the two source clocks is impossible.
+ */
 static struct clk clk_mpllref = {
 	.name		= "mpllref",
 	.parent		= &clk_xtal,
 	.id		= -1,
 };
 
-#if 0
-static struct clk clk_mpll = {
-	.name		= "mpll",
-	.parent		= &clk_mpllref,
-	.id		= -1,
-};
-#endif
-
 static struct clk clk_i2s_ext = {
 	.name		= "i2s-ext",
 	.id		= -1,
 };
 
-static int s3c2443_setparent_epllref(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
-
-	clksrc &= ~S3C2443_CLKSRC_EPLLREF_MASK;
-
-	if (parent == &clk_xtal)
-		clksrc |= S3C2443_CLKSRC_EPLLREF_XTAL;
-	else if (parent == &clk_ext)
-		clksrc |= S3C2443_CLKSRC_EPLLREF_EXTCLK;
-	else if (parent != &clk_mpllref)
-		return -EINVAL;
-
-	__raw_writel(clksrc, S3C2443_CLKSRC);
-	clk->parent = parent;
-
-	return 0;
-}
+static struct clk *clk_epllref_sources[] = {
+	[0] = &clk_mpllref,
+	[1] = &clk_mpllref,
+	[2] = &clk_xtal,
+	[3] = &clk_ext,
+};
 
-static struct clk clk_epllref = {
-	.name		= "epllref",
-	.id		= -1,
-	.set_parent	= s3c2443_setparent_epllref,
+static struct clksrc_clk clk_epllref = {
+	.clk	= {
+		.name		= "epllref",
+		.id		= -1,
+	},
+	.sources = &(struct clksrc_sources) {
+		.sources = clk_epllref_sources,
+		.nr_sources = ARRAY_SIZE(clk_epllref_sources),
+	},
+	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 7 },
 };
 
 static unsigned long s3c2443_getrate_mdivclk(struct clk *clk)
@@ -205,34 +134,29 @@ static struct clk clk_mdivclk = {
 	.name		= "mdivclk",
 	.parent		= &clk_mpllref,
 	.id		= -1,
-	.get_rate	= s3c2443_getrate_mdivclk,
+	.ops		= &(struct clk_ops) {
+		.get_rate	= s3c2443_getrate_mdivclk,
+	},
 };
 
-static int s3c2443_setparent_msysclk(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
-
-	clksrc &= ~(S3C2443_CLKSRC_MSYSCLK_MPLL |
-		    S3C2443_CLKSRC_EXTCLK_DIV);
-
-	if (parent == &clk_mpll)
-		clksrc |= S3C2443_CLKSRC_MSYSCLK_MPLL;
-	else if (parent == &clk_mdivclk)
-		clksrc |= S3C2443_CLKSRC_EXTCLK_DIV;
-	else if (parent != &clk_mpllref)
-		return -EINVAL;
-
-	__raw_writel(clksrc, S3C2443_CLKSRC);
-	clk->parent = parent;
-
-	return 0;
-}
+static struct clk *clk_msysclk_sources[] = {
+	[0] = &clk_mpllref,
+	[1] = &clk_mpll,
+	[2] = &clk_mdivclk,
+	[3] = &clk_mpllref,
+};
 
-static struct clk clk_msysclk = {
-	.name		= "msysclk",
-	.parent		= &clk_xtal,
-	.id		= -1,
-	.set_parent	= s3c2443_setparent_msysclk,
+static struct clksrc_clk clk_msysclk = {
+	.clk	= {
+		.name		= "msysclk",
+		.parent		= &clk_xtal,
+		.id		= -1,
+	},
+	.sources = &(struct clksrc_sources) {
+		.sources = clk_msysclk_sources,
+		.nr_sources = ARRAY_SIZE(clk_msysclk_sources),
+	},
+	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 3 },
 };
 
 /* armdiv
@@ -241,152 +165,159 @@ static struct clk clk_msysclk = {
  * divider values applied to it to then be fed into armclk.
 */
 
-static struct clk clk_armdiv = {
-	.name		= "armdiv",
-	.id		= -1,
-	.parent		= &clk_msysclk,
-};
+/* armdiv divisor table */
 
-/* armclk
- *
- * this is the clock fed into the ARM core itself, either from
- * armdiv or from hclk.
- */
+static unsigned int armdiv[16] = {
+	[S3C2443_CLKDIV0_ARMDIV_1 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 1,
+	[S3C2443_CLKDIV0_ARMDIV_2 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 2,
+	[S3C2443_CLKDIV0_ARMDIV_3 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 3,
+	[S3C2443_CLKDIV0_ARMDIV_4 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 4,
+	[S3C2443_CLKDIV0_ARMDIV_6 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 6,
+	[S3C2443_CLKDIV0_ARMDIV_8 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 8,
+	[S3C2443_CLKDIV0_ARMDIV_12 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 12,
+	[S3C2443_CLKDIV0_ARMDIV_16 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 16,
+};
 
-static int s3c2443_setparent_armclk(struct clk *clk, struct clk *parent)
+static inline unsigned int s3c2443_fclk_div(unsigned long clkcon0)
 {
-	unsigned long clkdiv0;
-
-	clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
-
-	if (parent == &clk_armdiv)
-		clkdiv0 &= ~S3C2443_CLKDIV0_DVS;
-	else if (parent == &clk_h)
-		clkdiv0 |= S3C2443_CLKDIV0_DVS;
-	else
-		return -EINVAL;
+	clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK;
 
-	__raw_writel(clkdiv0, S3C2443_CLKDIV0);
-	return 0;
+	return armdiv[clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT];
 }
 
-static struct clk clk_arm = {
-	.name		= "armclk",
-	.id		= -1,
-	.set_parent	= s3c2443_setparent_armclk,
-};
+static unsigned long s3c2443_armclk_roundrate(struct clk *clk,
+					      unsigned long rate)
+{
+	unsigned long parent = clk_get_rate(clk->parent);
+	unsigned long calc;
+	unsigned best = 256; /* bigger than any value */
+	unsigned div;
+	int ptr;
 
-/* esysclk
- *
- * this is sourced from either the EPLL or the EPLLref clock
-*/
+	for (ptr = 0; ptr < ARRAY_SIZE(armdiv); ptr++) {
+		div = armdiv[ptr];
+		calc = parent / div;
+		if (calc <= rate && div < best)
+			best = div;
+	}
 
-static int s3c2443_setparent_esysclk(struct clk *clk, struct clk *parent)
+	return parent / best;
+}
+
+static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate)
 {
-	unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
+	unsigned long parent = clk_get_rate(clk->parent);
+	unsigned long calc;
+	unsigned div;
+	unsigned best = 256; /* bigger than any value */
+	int ptr;
+	int val = -1;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(armdiv); ptr++) {
+		div = armdiv[ptr];
+		calc = parent / div;
+		if (calc <= rate && div < best) {
+			best = div;
+			val = ptr;
+		}
+	}
 
-	if (parent == &clk_epll)
-		clksrc |= S3C2443_CLKSRC_ESYSCLK_EPLL;
-	else if (parent == &clk_epllref)
-		clksrc &= ~S3C2443_CLKSRC_ESYSCLK_EPLL;
-	else
-		return -EINVAL;
+	if (val >= 0) {
+		unsigned long clkcon0;
 
-	__raw_writel(clksrc, S3C2443_CLKSRC);
-	clk->parent = parent;
+		clkcon0 = __raw_readl(S3C2443_CLKDIV0);
+		clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK;
+		clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT;
+		__raw_writel(clkcon0, S3C2443_CLKDIV0);
+	}
 
-	return 0;
+	return (val == -1) ? -EINVAL : 0;
 }
 
-static struct clk clk_esysclk = {
-	.name		= "esysclk",
-	.parent		= &clk_epll,
+static struct clk clk_armdiv = {
+	.name		= "armdiv",
 	.id		= -1,
-	.set_parent	= s3c2443_setparent_esysclk,
+	.parent		= &clk_msysclk.clk,
+	.ops		= &(struct clk_ops) {
+		.round_rate = s3c2443_armclk_roundrate,
+		.set_rate = s3c2443_armclk_setrate,
+	},
 };
 
-/* uartclk
+/* armclk
  *
- * UART baud-rate clock sourced from esysclk via a divisor
-*/
-
-static unsigned long s3c2443_getrate_uart(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2443_CLKDIV1);
-
-	div &= S3C2443_CLKDIV1_UARTDIV_MASK;
-	div >>= S3C2443_CLKDIV1_UARTDIV_SHIFT;
+ * this is the clock fed into the ARM core itself, from armdiv or from hclk.
+ */
 
-	return parent_rate / (div + 1);
-}
+static struct clk *clk_arm_sources[] = {
+	[0] = &clk_armdiv,
+	[1] = &clk_h,
+};
 
+static struct clksrc_clk clk_arm = {
+	.clk	= {
+		.name		= "armclk",
+		.id		= -1,
+	},
+	.sources = &(struct clksrc_sources) {
+		.sources = clk_arm_sources,
+		.nr_sources = ARRAY_SIZE(clk_arm_sources),
+	},
+	.reg_src = { .reg = S3C2443_CLKDIV0, .size = 1, .shift = 13 },
+};
 
-static int s3c2443_setrate_uart(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
+/* esysclk
+ *
+ * this is sourced from either the EPLL or the EPLLref clock
+*/
 
-	rate = s3c2443_roundrate_clksrc16(clk, rate);
-	rate = parent_rate / rate;
+static struct clk *clk_sysclk_sources[] = {
+	[0] = &clk_epllref.clk,
+	[1] = &clk_epll,
+};
 
-	clkdivn &= ~S3C2443_CLKDIV1_UARTDIV_MASK;
-	clkdivn |= (rate - 1) << S3C2443_CLKDIV1_UARTDIV_SHIFT;
+static struct clksrc_clk clk_esysclk = {
+	.clk	= {
+		.name		= "esysclk",
+		.parent		= &clk_epll,
+		.id		= -1,
+	},
+	.sources = &(struct clksrc_sources) {
+		.sources = clk_sysclk_sources,
+		.nr_sources = ARRAY_SIZE(clk_sysclk_sources),
+	},
+	.reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 6 },
+};
 
-	__raw_writel(clkdivn, S3C2443_CLKDIV1);
-	return 0;
-}
+/* uartclk
+ *
+ * UART baud-rate clock sourced from esysclk via a divisor
+*/
 
-static struct clk clk_uart = {
-	.name		= "uartclk",
-	.id		= -1,
-	.parent		= &clk_esysclk,
-	.get_rate	= s3c2443_getrate_uart,
-	.set_rate	= s3c2443_setrate_uart,
-	.round_rate	= s3c2443_roundrate_clksrc16,
+static struct clksrc_clk clk_uart = {
+	.clk	= {
+		.name		= "uartclk",
+		.id		= -1,
+		.parent		= &clk_esysclk.clk,
+	},
+	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 },
 };
 
+
 /* hsspi
  *
  * high-speed spi clock, sourced from esysclk
 */
 
-static unsigned long s3c2443_getrate_hsspi(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2443_CLKDIV1);
-
-	div &= S3C2443_CLKDIV1_HSSPIDIV_MASK;
-	div >>= S3C2443_CLKDIV1_HSSPIDIV_SHIFT;
-
-	return parent_rate / (div + 1);
-}
-
-
-static int s3c2443_setrate_hsspi(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
-
-	rate = s3c2443_roundrate_clksrc4(clk, rate);
-	rate = parent_rate / rate;
-
-	clkdivn &= ~S3C2443_CLKDIV1_HSSPIDIV_MASK;
-	clkdivn |= (rate - 1) << S3C2443_CLKDIV1_HSSPIDIV_SHIFT;
-
-	__raw_writel(clkdivn, S3C2443_CLKDIV1);
-	return 0;
-}
-
-static struct clk clk_hsspi = {
-	.name		= "hsspi",
-	.id		= -1,
-	.parent		= &clk_esysclk,
-	.ctrlbit	= S3C2443_SCLKCON_HSSPICLK,
-	.enable		= s3c2443_clkcon_enable_s,
-	.get_rate	= s3c2443_getrate_hsspi,
-	.set_rate	= s3c2443_setrate_hsspi,
-	.round_rate	= s3c2443_roundrate_clksrc4,
+static struct clksrc_clk clk_hsspi = {
+	.clk	= {
+		.name		= "hsspi",
+		.id		= -1,
+		.parent		= &clk_esysclk.clk,
+		.ctrlbit	= S3C2443_SCLKCON_HSSPICLK,
+		.enable		= s3c2443_clkcon_enable_s,
+	},
+	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 },
 };
 
 /* usbhost
@@ -394,41 +325,15 @@ static struct clk clk_hsspi = {
  * usb host bus-clock, usually 48MHz to provide USB bus clock timing
 */
 
-static unsigned long s3c2443_getrate_usbhost(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2443_CLKDIV1);
-
-	div &= S3C2443_CLKDIV1_USBHOSTDIV_MASK;
-	div >>= S3C2443_CLKDIV1_USBHOSTDIV_SHIFT;
-
-	return parent_rate / (div + 1);
-}
-
-static int s3c2443_setrate_usbhost(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
-
-	rate = s3c2443_roundrate_clksrc4(clk, rate);
-	rate = parent_rate / rate;
-
-	clkdivn &= ~S3C2443_CLKDIV1_USBHOSTDIV_MASK;
-	clkdivn |= (rate - 1) << S3C2443_CLKDIV1_USBHOSTDIV_SHIFT;
-
-	__raw_writel(clkdivn, S3C2443_CLKDIV1);
-	return 0;
-}
-
-static struct clk clk_usb_bus_host = {
-	.name		= "usb-bus-host-parent",
-	.id		= -1,
-	.parent		= &clk_esysclk,
-	.ctrlbit	= S3C2443_SCLKCON_USBHOST,
-	.enable		= s3c2443_clkcon_enable_s,
-	.get_rate	= s3c2443_getrate_usbhost,
-	.set_rate	= s3c2443_setrate_usbhost,
-	.round_rate	= s3c2443_roundrate_clksrc4,
+static struct clksrc_clk clk_usb_bus_host = {
+	.clk	= {
+		.name		= "usb-bus-host-parent",
+		.id		= -1,
+		.parent		= &clk_esysclk.clk,
+		.ctrlbit	= S3C2443_SCLKCON_USBHOST,
+		.enable		= s3c2443_clkcon_enable_s,
+	},
+	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 },
 };
 
 /* clk_hsmcc_div
@@ -438,39 +343,13 @@ static struct clk clk_usb_bus_host = {
  * be fed to the hsmmc block
 */
 
-static unsigned long s3c2443_getrate_hsmmc_div(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2443_CLKDIV1);
-
-	div &= S3C2443_CLKDIV1_HSMMCDIV_MASK;
-	div >>= S3C2443_CLKDIV1_HSMMCDIV_SHIFT;
-
-	return parent_rate / (div + 1);
-}
-
-static int s3c2443_setrate_hsmmc_div(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
-
-	rate = s3c2443_roundrate_clksrc4(clk, rate);
-	rate = parent_rate / rate;
-
-	clkdivn &= ~S3C2443_CLKDIV1_HSMMCDIV_MASK;
-	clkdivn |= (rate - 1) << S3C2443_CLKDIV1_HSMMCDIV_SHIFT;
-
-	__raw_writel(clkdivn, S3C2443_CLKDIV1);
-	return 0;
-}
-
-static struct clk clk_hsmmc_div = {
-	.name		= "hsmmc-div",
-	.id		= -1,
-	.parent		= &clk_esysclk,
-	.get_rate	= s3c2443_getrate_hsmmc_div,
-	.set_rate	= s3c2443_setrate_hsmmc_div,
-	.round_rate	= s3c2443_roundrate_clksrc4,
+static struct clksrc_clk clk_hsmmc_div = {
+	.clk	= {
+		.name		= "hsmmc-div",
+		.id		= -1,
+		.parent		= &clk_esysclk.clk,
+	},
+	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 },
 };
 
 static int s3c2443_setparent_hsmmc(struct clk *clk, struct clk *parent)
@@ -503,82 +382,55 @@ static int s3c2443_enable_hsmmc(struct clk *clk, int enable)
 static struct clk clk_hsmmc = {
 	.name		= "hsmmc-if",
 	.id		= -1,
-	.parent		= &clk_hsmmc_div,
+	.parent		= &clk_hsmmc_div.clk,
 	.enable		= s3c2443_enable_hsmmc,
-	.set_parent	= s3c2443_setparent_hsmmc,
+	.ops		= &(struct clk_ops) {
+		.set_parent	= s3c2443_setparent_hsmmc,
+	},
 };
 
 /* i2s_eplldiv
  *
- * this clock is the output from the i2s divisor of esysclk
+ * This clock is the output from the I2S divisor of ESYSCLK, and is seperate
+ * from the mux that comes after it (cannot merge into one single clock)
 */
 
-static unsigned long s3c2443_getrate_i2s_eplldiv(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2443_CLKDIV1);
-
-	div &= S3C2443_CLKDIV1_I2SDIV_MASK;
-	div >>= S3C2443_CLKDIV1_I2SDIV_SHIFT;
-
-	return parent_rate / (div + 1);
-}
-
-static int s3c2443_setrate_i2s_eplldiv(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
-
-	rate = s3c2443_roundrate_clksrc16(clk, rate);
-	rate = parent_rate / rate;
-
-	clkdivn &= ~S3C2443_CLKDIV1_I2SDIV_MASK;
-	clkdivn |= (rate - 1) << S3C2443_CLKDIV1_I2SDIV_SHIFT;
-
-	__raw_writel(clkdivn, S3C2443_CLKDIV1);
-	return 0;
-}
-
-static struct clk clk_i2s_eplldiv = {
-	.name		= "i2s-eplldiv",
-	.id		= -1,
-	.parent		= &clk_esysclk,
-	.get_rate	= s3c2443_getrate_i2s_eplldiv,
-	.set_rate	= s3c2443_setrate_i2s_eplldiv,
-	.round_rate	= s3c2443_roundrate_clksrc16,
+static struct clksrc_clk clk_i2s_eplldiv = {
+	.clk	= {
+		.name		= "i2s-eplldiv",
+		.id		= -1,
+		.parent		= &clk_esysclk.clk,
+	},
+	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 12, },
 };
 
 /* i2s-ref
  *
  * i2s bus reference clock, selectable from external, esysclk or epllref
+ *
+ * Note, this used to be two clocks, but was compressed into one.
 */
 
-static int s3c2443_setparent_i2s(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
-
-	clksrc &= ~S3C2443_CLKSRC_I2S_MASK;
-
-	if (parent == &clk_epllref)
-		clksrc |= S3C2443_CLKSRC_I2S_EPLLREF;
-	else if (parent == &clk_i2s_ext)
-		clksrc |= S3C2443_CLKSRC_I2S_EXT;
-	else if (parent != &clk_i2s_eplldiv)
-		return -EINVAL;
-
-	clk->parent = parent;
-	__raw_writel(clksrc, S3C2443_CLKSRC);
-
-	return 0;
-}
+struct clk *clk_i2s_srclist[] = {
+	[0] = &clk_i2s_eplldiv.clk,
+	[1] = &clk_i2s_ext,
+	[2] = &clk_epllref.clk,
+	[3] = &clk_epllref.clk,
+};
 
-static struct clk clk_i2s = {
-	.name		= "i2s-if",
-	.id		= -1,
-	.parent		= &clk_i2s_eplldiv,
-	.ctrlbit	= S3C2443_SCLKCON_I2SCLK,
-	.enable		= s3c2443_clkcon_enable_s,
-	.set_parent	= s3c2443_setparent_i2s,
+static struct clksrc_clk clk_i2s = {
+	.clk	= {
+		.name		= "i2s-if",
+		.id		= -1,
+		.ctrlbit	= S3C2443_SCLKCON_I2SCLK,
+		.enable		= s3c2443_clkcon_enable_s,
+
+	},
+	.sources = &(struct clksrc_sources) {
+		.sources = clk_i2s_srclist,
+		.nr_sources = ARRAY_SIZE(clk_i2s_srclist),
+	},
+	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 },
 };
 
 /* cam-if
@@ -586,41 +438,15 @@ static struct clk clk_i2s = {
  * camera interface bus-clock, divided down from esysclk
 */
 
-static unsigned long s3c2443_getrate_cam(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2443_CLKDIV1);
-
-	div  &= S3C2443_CLKDIV1_CAMDIV_MASK;
-	div >>= S3C2443_CLKDIV1_CAMDIV_SHIFT;
-
-	return parent_rate / (div + 1);
-}
-
-static int s3c2443_setrate_cam(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long clkdiv1 = __raw_readl(S3C2443_CLKDIV1);
-
-	rate = s3c2443_roundrate_clksrc16(clk, rate);
-	rate = parent_rate / rate;
-
-	clkdiv1 &= ~S3C2443_CLKDIV1_CAMDIV_MASK;
-	clkdiv1 |= (rate - 1) << S3C2443_CLKDIV1_CAMDIV_SHIFT;
-
-	__raw_writel(clkdiv1, S3C2443_CLKDIV1);
-	return 0;
-}
-
-static struct clk clk_cam = {
-	.name		= "camif-upll",		/* same as 2440 name */
-	.id		= -1,
-	.parent		= &clk_esysclk,
-	.ctrlbit	= S3C2443_SCLKCON_CAMCLK,
-	.enable		= s3c2443_clkcon_enable_s,
-	.get_rate	= s3c2443_getrate_cam,
-	.set_rate	= s3c2443_setrate_cam,
-	.round_rate	= s3c2443_roundrate_clksrc16,
+static struct clksrc_clk clk_cam = {
+	.clk	= {
+		.name		= "camif-upll",	/* same as 2440 name */
+		.id		= -1,
+		.parent		= &clk_esysclk.clk,
+		.ctrlbit	= S3C2443_SCLKCON_CAMCLK,
+		.enable		= s3c2443_clkcon_enable_s,
+	},
+	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 26 },
 };
 
 /* display-if
@@ -628,41 +454,15 @@ static struct clk clk_cam = {
  * display interface clock, divided from esysclk
 */
 
-static unsigned long s3c2443_getrate_display(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2443_CLKDIV1);
-
-	div &= S3C2443_CLKDIV1_DISPDIV_MASK;
-	div >>= S3C2443_CLKDIV1_DISPDIV_SHIFT;
-
-	return parent_rate / (div + 1);
-}
-
-static int s3c2443_setrate_display(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
-
-	rate = s3c2443_roundrate_clksrc256(clk, rate);
-	rate = parent_rate / rate;
-
-	clkdivn &= ~S3C2443_CLKDIV1_UARTDIV_MASK;
-	clkdivn |= (rate - 1) << S3C2443_CLKDIV1_UARTDIV_SHIFT;
-
-	__raw_writel(clkdivn, S3C2443_CLKDIV1);
-	return 0;
-}
-
-static struct clk clk_display = {
-	.name		= "display-if",
-	.id		= -1,
-	.parent		= &clk_esysclk,
-	.ctrlbit	= S3C2443_SCLKCON_DISPCLK,
-	.enable		= s3c2443_clkcon_enable_s,
-	.get_rate	= s3c2443_getrate_display,
-	.set_rate	= s3c2443_setrate_display,
-	.round_rate	= s3c2443_roundrate_clksrc256,
+static struct clksrc_clk clk_display = {
+	.clk	= {
+		.name		= "display-if",
+		.id		= -1,
+		.parent		= &clk_esysclk.clk,
+		.ctrlbit	= S3C2443_SCLKCON_DISPCLK,
+		.enable		= s3c2443_clkcon_enable_s,
+	},
+	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 8, .shift = 16 },
 };
 
 /* prediv
@@ -684,8 +484,10 @@ static unsigned long s3c2443_prediv_getrate(struct clk *clk)
 static struct clk clk_prediv = {
 	.name		= "prediv",
 	.id		= -1,
-	.parent		= &clk_msysclk,
-	.get_rate	= s3c2443_prediv_getrate,
+	.parent		= &clk_msysclk.clk,
+	.ops		= &(struct clk_ops) {
+		.get_rate	= s3c2443_prediv_getrate,
+	},
 };
 
 /* standard clock definitions */
@@ -857,7 +659,7 @@ static struct clk init_clocks[] = {
 	}, {
 		.name		= "usb-bus-host",
 		.id		= -1,
-		.parent		= &clk_usb_bus_host,
+		.parent		= &clk_usb_bus_host.clk,
 	}, {
 		.name		= "ac97",
 		.id		= -1,
@@ -868,103 +670,26 @@ static struct clk init_clocks[] = {
 
 /* clocks to add where we need to check their parentage */
 
-/* s3c2443_clk_initparents
- *
- * Initialise the parents for the clocks that we get at start-time
-*/
-
-static int __init clk_init_set_parent(struct clk *clk, struct clk *parent)
-{
-	printk(KERN_DEBUG "clock %s: parent %s\n", clk->name, parent->name);
-	return clk_set_parent(clk, parent);
-}
-
-static void __init s3c2443_clk_initparents(void)
-{
-	unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
-	struct clk *parent;
-
-	switch (clksrc & S3C2443_CLKSRC_EPLLREF_MASK) {
-	case S3C2443_CLKSRC_EPLLREF_EXTCLK:
-		parent = &clk_ext;
-		break;
-
-	case S3C2443_CLKSRC_EPLLREF_XTAL:
-	default:
-		parent = &clk_xtal;
-		break;
-
-	case S3C2443_CLKSRC_EPLLREF_MPLLREF:
-	case S3C2443_CLKSRC_EPLLREF_MPLLREF2:
-		parent = &clk_mpllref;
-		break;
-	}
-
-	clk_init_set_parent(&clk_epllref, parent);
-
-	switch (clksrc & S3C2443_CLKSRC_I2S_MASK) {
-	case S3C2443_CLKSRC_I2S_EXT:
-		parent = &clk_i2s_ext;
-		break;
-
-	case S3C2443_CLKSRC_I2S_EPLLDIV:
-	default:
-		parent = &clk_i2s_eplldiv;
-		break;
-
-	case S3C2443_CLKSRC_I2S_EPLLREF:
-	case S3C2443_CLKSRC_I2S_EPLLREF3:
-		parent = &clk_epllref;
-	}
-
-	clk_init_set_parent(&clk_i2s, &clk_epllref);
-
-	/* esysclk source */
-
-	parent = (clksrc & S3C2443_CLKSRC_ESYSCLK_EPLL) ?
-		&clk_epll : &clk_epllref;
-
-	clk_init_set_parent(&clk_esysclk, parent);
-
-	/* msysclk source */
-
-	if (clksrc & S3C2443_CLKSRC_MSYSCLK_MPLL) {
-		parent = &clk_mpll;
-	} else {
-		parent = (clksrc & S3C2443_CLKSRC_EXTCLK_DIV) ?
-			&clk_mdivclk : &clk_mpllref;
-	}
-
-	clk_init_set_parent(&clk_msysclk, parent);
-
-	/* arm */
-
-	if (__raw_readl(S3C2443_CLKDIV0) & S3C2443_CLKDIV0_DVS)
-		parent = &clk_h;
-	else
-		parent = &clk_armdiv;
-
-	clk_init_set_parent(&clk_arm, parent);
-}
-
-/* armdiv divisor table */
-
-static unsigned int armdiv[16] = {
-	[S3C2443_CLKDIV0_ARMDIV_1 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 1,
-	[S3C2443_CLKDIV0_ARMDIV_2 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 2,
-	[S3C2443_CLKDIV0_ARMDIV_3 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 3,
-	[S3C2443_CLKDIV0_ARMDIV_4 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 4,
-	[S3C2443_CLKDIV0_ARMDIV_6 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 6,
-	[S3C2443_CLKDIV0_ARMDIV_8 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 8,
-	[S3C2443_CLKDIV0_ARMDIV_12 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 12,
-	[S3C2443_CLKDIV0_ARMDIV_16 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 16,
+static struct clksrc_clk __initdata *init_list[] = {
+	&clk_epllref, /* should be first */
+	&clk_esysclk,
+	&clk_msysclk,
+	&clk_arm,
+	&clk_i2s_eplldiv,
+	&clk_i2s,
+	&clk_cam,
+	&clk_uart,
+	&clk_display,
+	&clk_hsmmc_div,
+	&clk_usb_bus_host,
 };
 
-static inline unsigned int s3c2443_fclk_div(unsigned long clkcon0)
+static void __init s3c2443_clk_initparents(void)
 {
-	clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK;
+	int ptr;
 
-	return armdiv[clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT];
+	for (ptr = 0; ptr < ARRAY_SIZE(init_list); ptr++)
+		s3c_set_clksrc(init_list[ptr], true);
 }
 
 static inline unsigned long s3c2443_get_hdiv(unsigned long clkcon0)
@@ -976,15 +701,12 @@ static inline unsigned long s3c2443_get_hdiv(unsigned long clkcon0)
 
 /* clocks to add straight away */
 
-static struct clk *clks[] __initdata = {
-	&clk_ext,
-	&clk_epll,
+static struct clksrc_clk *clksrcs[] __initdata = {
 	&clk_usb_bus_host,
-	&clk_usb_bus,
-	&clk_esysclk,
 	&clk_epllref,
-	&clk_mpllref,
+	&clk_esysclk,
 	&clk_msysclk,
+	&clk_arm,
 	&clk_uart,
 	&clk_display,
 	&clk_cam,
@@ -992,9 +714,15 @@ static struct clk *clks[] __initdata = {
 	&clk_i2s,
 	&clk_hsspi,
 	&clk_hsmmc_div,
+};
+
+static struct clk *clks[] __initdata = {
+	&clk_ext,
+	&clk_epll,
+	&clk_usb_bus,
+	&clk_mpllref,
 	&clk_hsmmc,
 	&clk_armdiv,
-	&clk_arm,
 	&clk_prediv,
 };
 
@@ -1014,7 +742,7 @@ void __init_or_cpufreq s3c2443_setup_clocks(void)
 	clk_put(xtal_clk);
 
 	pll = s3c2443_get_mpll(mpllcon, xtal);
-	clk_msysclk.rate = pll;
+	clk_msysclk.clk.rate = pll;
 
 	fclk = pll / s3c2443_fclk_div(clkdiv0);
 	hclk = s3c2443_prediv_getrate(&clk_prediv);
@@ -1056,15 +784,18 @@ void __init s3c2443_init_clocks(int xtal)
 		}
 	}
 
+	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+		s3c_register_clksrc(clksrcs[ptr], 1);
+
 	clk_epll.rate = s3c2443_get_epll(epllcon, xtal);
-	clk_epll.parent = &clk_epllref;
-	clk_usb_bus.parent = &clk_usb_bus_host;
+	clk_epll.parent = &clk_epllref.clk;
+	clk_usb_bus.parent = &clk_usb_bus_host.clk;
 
 	/* ensure usb bus clock is within correct rate of 48MHz */
 
-	if (clk_get_rate(&clk_usb_bus_host) != (48 * 1000 * 1000)) {
+	if (clk_get_rate(&clk_usb_bus_host.clk) != (48 * 1000 * 1000)) {
 		printk(KERN_INFO "Warning: USB host bus not at 48MHz\n");
-		clk_set_rate(&clk_usb_bus_host, 48*1000*1000);
+		clk_set_rate(&clk_usb_bus_host.clk, 48*1000*1000);
 	}
 
 	printk("S3C2443: epll %s %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n",
@@ -1074,14 +805,7 @@ void __init s3c2443_init_clocks(int xtal)
 
 	/* register clocks from clock array */
 
-	clkp = init_clocks;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-	}
+	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
 
 	/* We must be careful disabling the clocks we are not intending to
 	 * be using at boot time, as subsystems such as the LCD which do
diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c
index 397f3b5c0b47..3f658685ec16 100644
--- a/arch/arm/mach-s3c2443/dma.c
+++ b/arch/arm/mach-s3c2443/dma.c
@@ -20,7 +20,7 @@
 
 #include <mach/dma.h>
 
-#include <plat/dma-plat.h>
+#include <plat/dma-s3c24xx.h>
 #include <plat/cpu.h>
 
 #include <plat/regs-serial.h>
diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c
index 039a46243105..e2e362bda9b7 100644
--- a/arch/arm/mach-s3c2443/mach-smdk2443.c
+++ b/arch/arm/mach-s3c2443/mach-smdk2443.c
@@ -40,7 +40,7 @@
 #include <plat/iic.h>
 
 #include <plat/s3c2410.h>
-#include <plat/s3c2440.h>
+#include <plat/s3c2443.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
@@ -106,6 +106,9 @@ static struct platform_device *smdk2443_devices[] __initdata = {
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
 	&s3c_device_hsmmc0,
+#ifdef CONFIG_SND_SOC_SMDK2443_WM9710
+	&s3c_device_ac97,
+#endif
 };
 
 static void __init smdk2443_map_io(void)
@@ -118,6 +121,11 @@ static void __init smdk2443_map_io(void)
 static void __init smdk2443_machine_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
+
+#ifdef CONFIG_SND_SOC_SMDK2443_WM9710
+	s3c24xx_ac97_setup_gpio(S3C24XX_AC97_GPE0);
+#endif
+
 	platform_add_devices(smdk2443_devices, ARRAY_SIZE(smdk2443_devices));
 	smdk_machine_init();
 }
diff --git a/arch/arm/plat-s3c/include/mach/io.h b/arch/arm/mach-s3c24a0/include/mach/io.h
index f6a53631b665..4326c30fabcb 100644
--- a/arch/arm/plat-s3c/include/mach/io.h
+++ b/arch/arm/mach-s3c24a0/include/mach/io.h
@@ -1,9 +1,9 @@
-/* arch/arm/plat-s3c/include/mach/io.h
+/* arch/arm/mach-s3c24a0/include/mach/io.h
  *
  * Copyright 2008 Simtec Electronics
  *	Ben Dooks <ben-linux@fluff.org>
  *
- * Default IO routines for plat-s3c based systems, such as S3C24A0
+ * Default IO routines for S3C24A0
  */
 
 #ifndef __ASM_ARM_ARCH_IO_H
diff --git a/arch/arm/mach-s3c6400/Kconfig b/arch/arm/mach-s3c6400/Kconfig
deleted file mode 100644
index a250bf68709f..000000000000
--- a/arch/arm/mach-s3c6400/Kconfig
+++ /dev/null
@@ -1,30 +0,0 @@
-# Copyright 2008 Openmoko, Inc.
-#	Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
-#
-# Licensed under GPLv2
-
-# Configuration options for the S3C6410 CPU
-
-config CPU_S3C6400
-	bool
-	select CPU_S3C6400_INIT
-	select CPU_S3C6400_CLOCK
-	help
-	  Enable S3C6400 CPU support
-
-config S3C6400_SETUP_SDHCI
-	bool
-	help
-	  Internal configuration for default SDHCI
-	  setup for S3C6400.
-
-# S36400 Macchine support
-
-config MACH_SMDK6400
-       bool "SMDK6400"
-	select CPU_S3C6400
-	select S3C_DEV_HSMMC
-	select S3C_DEV_NAND
-	select S3C6400_SETUP_SDHCI
-	help
-	  Machine support for the Samsung SMDK6400
diff --git a/arch/arm/mach-s3c6400/Makefile b/arch/arm/mach-s3c6400/Makefile
deleted file mode 100644
index df1ce4aa03e5..000000000000
--- a/arch/arm/mach-s3c6400/Makefile
+++ /dev/null
@@ -1,23 +0,0 @@
-# arch/arm/mach-s3c6400/Makefile
-#
-# Copyright 2008 Openmoko, Inc.
-# Copyright 2008 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:=
-obj-				:=
-
-# Core support for S3C6400 system
-
-obj-$(CONFIG_CPU_S3C6400)	+= s3c6400.o
-
-# setup support
-
-obj-$(CONFIG_S3C6400_SETUP_SDHCI) += setup-sdhci.o
-
-# Machine support
-
-obj-$(CONFIG_MACH_SMDK6400)	+= mach-smdk6400.o
diff --git a/arch/arm/mach-s3c6400/include/mach/dma.h b/arch/arm/mach-s3c6400/include/mach/dma.h
deleted file mode 100644
index 6723860748be..000000000000
--- a/arch/arm/mach-s3c6400/include/mach/dma.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/* linux/arch/arm/mach-s3c6400/include/mach/dma.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C6400 - DMA support
- */
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H __FILE__
-
-#define S3C_DMA_CHANNELS	(16)
-
-/* see mach-s3c2410/dma.h for notes on dma channel numbers */
-
-/* Note, for the S3C64XX architecture we keep the DMACH_
- * defines in the order they are allocated to [S]DMA0/[S]DMA1
- * so that is easy to do DHACH_ -> DMA controller conversion
- */
-enum dma_ch {
-	/* DMA0/SDMA0 */
-	DMACH_UART0 = 0,
-	DMACH_UART0_SRC2,
-	DMACH_UART1,
-	DMACH_UART1_SRC2,
-	DMACH_UART2,
-	DMACH_UART2_SRC2,
-	DMACH_UART3,
-	DMACH_UART3_SRC2,
-	DMACH_PCM0_TX,
-	DMACH_PCM0_RX,
-	DMACH_I2S0_OUT,
-	DMACH_I2S0_IN,
-	DMACH_SPI0_TX,
-	DMACH_SPI0_RX,
-	DMACH_HSI_I2SV40_TX,
-	DMACH_HSI_I2SV40_RX,
-
-	/* DMA1/SDMA1 */
-	DMACH_PCM1_TX = 16,
-	DMACH_PCM1_RX,
-	DMACH_I2S1_OUT,
-	DMACH_I2S1_IN,
-	DMACH_SPI1_TX,
-	DMACH_SPI1_RX,
-	DMACH_AC97_PCMOUT,
-	DMACH_AC97_PCMIN,
-	DMACH_AC97_MICIN,
-	DMACH_PWM,
-	DMACH_IRDA,
-	DMACH_EXTERNAL,
-	DMACH_RES1,
-	DMACH_RES2,
-	DMACH_SECURITY_RX,	/* SDMA1 only */
-	DMACH_SECURITY_TX,	/* SDMA1 only */
-	DMACH_MAX		/* the end */
-};
-
-static __inline__ bool s3c_dma_has_circular(void)
-{
-	return true;
-}
-
-#define S3C2410_DMAF_CIRCULAR		(1 << 0)
-
-#include <plat/dma.h>
-
-#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/gpio-core.h b/arch/arm/mach-s3c6400/include/mach/gpio-core.h
deleted file mode 100644
index d89aae68b0a5..000000000000
--- a/arch/arm/mach-s3c6400/include/mach/gpio-core.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* arch/arm/mach-s3c6400/include/mach/gpio-core.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C64XX - GPIO core support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_GPIO_CORE_H
-#define __ASM_ARCH_GPIO_CORE_H __FILE__
-
-/* currently we just include the platform support */
-#include <plat/gpio-core.h>
-
-#endif /* __ASM_ARCH_GPIO_CORE_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/irqs.h b/arch/arm/mach-s3c6400/include/mach/irqs.h
deleted file mode 100644
index 4c97f9a4370b..000000000000
--- a/arch/arm/mach-s3c6400/include/mach/irqs.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* linux/arch/arm/mach-s3c6400/include/mach/irqs.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C6400 - IRQ definitions
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H __FILE__
-
-#include <plat/irqs.h>
-
-#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/regs-clock.h b/arch/arm/mach-s3c6400/include/mach/regs-clock.h
deleted file mode 100644
index a6c7f4eb3a1b..000000000000
--- a/arch/arm/mach-s3c6400/include/mach/regs-clock.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* linux/arch/arm/mach-s3c6400/include/mach/regs-clock.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C64XX - clock register compatibility with s3c24xx
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <plat/regs-clock.h>
-
diff --git a/arch/arm/mach-s3c6410/Makefile b/arch/arm/mach-s3c6410/Makefile
deleted file mode 100644
index 3e48c3dbf973..000000000000
--- a/arch/arm/mach-s3c6410/Makefile
+++ /dev/null
@@ -1,26 +0,0 @@
-# arch/arm/plat-s3c6410/Makefile
-#
-# Copyright 2008 Openmoko, Inc.
-# Copyright 2008 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:=
-obj-				:=
-
-# Core support for S3C6410 system
-
-obj-$(CONFIG_CPU_S3C6410)	+= cpu.o
-
-# Helper and device support
-
-obj-$(CONFIG_S3C6410_SETUP_SDHCI)	+= setup-sdhci.o
-
-# machine support
-
-obj-$(CONFIG_MACH_ANW6410)	+= mach-anw6410.o
-obj-$(CONFIG_MACH_SMDK6410)	+= mach-smdk6410.o
-obj-$(CONFIG_MACH_NCP)		+= mach-ncp.o
-obj-$(CONFIG_MACH_HMT)		+= mach-hmt.o
diff --git a/arch/arm/mach-s3c6410/setup-sdhci.c b/arch/arm/mach-s3c6410/setup-sdhci.c
deleted file mode 100644
index 816d2d9f9ef8..000000000000
--- a/arch/arm/mach-s3c6410/setup-sdhci.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/* linux/arch/arm/mach-s3c6410/setup-sdhci.c
- *
- * Copyright 2008 Simtec Electronics
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C6410 - Helper functions for settign up SDHCI device(s) (HSMMC)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/mmc/card.h>
-#include <linux/mmc/host.h>
-
-#include <plat/regs-sdhci.h>
-#include <plat/sdhci.h>
-
-/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
-
-char *s3c6410_hsmmc_clksrcs[4] = {
-	[0] = "hsmmc",
-	[1] = "hsmmc",
-	[2] = "mmc_bus",
-	/* [3] = "48m", - note not successfully used yet */
-};
-
-
-void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
-				    void __iomem *r,
-				    struct mmc_ios *ios,
-				    struct mmc_card *card)
-{
-	u32 ctrl2, ctrl3;
-
-	/* don't need to alter anything acording to card-type */
-
-	writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
-
-	ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
-	ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
-	ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
-		  S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
-		  S3C_SDHCI_CTRL2_ENFBCLKRX |
-		  S3C_SDHCI_CTRL2_DFCNT_NONE |
-		  S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
-
-	if (ios->clock < 25 * 1000000)
-		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
-			 S3C_SDHCI_CTRL3_FCSEL2 |
-			 S3C_SDHCI_CTRL3_FCSEL1 |
-			 S3C_SDHCI_CTRL3_FCSEL0);
-	else
-		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
-
-	printk(KERN_INFO "%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3);
-	writel(ctrl2, r + S3C_SDHCI_CONTROL2);
-	writel(ctrl3, r + S3C_SDHCI_CONTROL3);
-}
-
diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 162f4561f80f..959df3840de5 100644
--- a/arch/arm/mach-s3c6410/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -1,22 +1,78 @@
 # Copyright 2008 Openmoko, Inc.
-# Copyright 2008 Simtec Electronics
+#	Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
 #
 # Licensed under GPLv2
 
+# temporary until we can eliminate all drivers using it.
+config PLAT_S3C64XX
+	bool
+	depends on ARCH_S3C64XX
+	default y
+	help
+	  Base platform code for any Samsung S3C64XX device
+
+
 # Configuration options for the S3C6410 CPU
 
+config CPU_S3C6400
+	bool
+	help
+	  Enable S3C6400 CPU support
+
 config CPU_S3C6410
 	bool
-	select CPU_S3C6400_INIT
-	select CPU_S3C6400_CLOCK
 	help
 	  Enable S3C6410 CPU support
 
-config S3C6410_SETUP_SDHCI
-	bool
+config S3C64XX_DMA
+	bool "S3C64XX DMA"
+	select S3C_DMA
+
+config S3C64XX_SETUP_SDHCI
 	select S3C64XX_SETUP_SDHCI_GPIO
+	bool
 	help
-	  Internal helper functions for S3C6410 based SDHCI systems
+	  Internal configuration for default SDHCI setup for S3C6400 and
+	  S3C6410 SoCs.
+
+# platform specific device setup
+
+config S3C64XX_SETUP_I2C0
+	bool
+	default y
+	help
+	  Common setup code for i2c bus 0.
+
+	  Note, currently since i2c0 is always compiled, this setup helper
+	  is always compiled with it.
+
+config S3C64XX_SETUP_I2C1
+	bool
+	help
+	  Common setup code for i2c bus 1.
+
+config S3C64XX_SETUP_FB_24BPP
+	bool
+	help
+	  Common setup code for S3C64XX with an 24bpp RGB display helper.
+
+config S3C64XX_SETUP_SDHCI_GPIO
+	bool
+	help
+	  Common setup code for S3C64XX SDHCI GPIO configurations
+
+# S36400 Macchine support
+
+config MACH_SMDK6400
+       bool "SMDK6400"
+	select CPU_S3C6400
+	select S3C_DEV_HSMMC
+	select S3C_DEV_NAND
+	select S3C64XX_SETUP_SDHCI
+	help
+	  Machine support for the Samsung SMDK6400
+
+# S3C6410 machine support
 
 config MACH_ANW6410
 	bool "A&W6410"
@@ -35,7 +91,7 @@ config MACH_SMDK6410
 	select S3C_DEV_FB
 	select S3C_DEV_USB_HOST
 	select S3C_DEV_USB_HSOTG
-	select S3C6410_SETUP_SDHCI
+	select S3C64XX_SETUP_SDHCI
 	select S3C64XX_SETUP_I2C1
 	select S3C64XX_SETUP_FB_24BPP
 	help
@@ -58,7 +114,7 @@ config SMDK6410_SD_CH0
 	  at least some SMDK6410 boards come with the
 	  resistors fitted so that the card detects for
 	  channels 0 and 1 are the same.
-       
+
 config SMDK6410_SD_CH1
 	bool "Use channel 1 only"
 	depends on MACH_SMDK6410
@@ -88,6 +144,21 @@ config SMDK6410_WM1190_EV1
 	  detected at runtime so the the resulting kernel can be used
 	  with or without the 1190-EV1 fitted.
 
+config SMDK6410_WM1192_EV1
+	bool "Support Wolfson Microelectronics 1192-EV1 PMIC card"
+	depends on MACH_SMDK6410
+	select REGULATOR
+	select REGULATOR_WM831X
+	select S3C24XX_GPIO_EXTRA64
+	select MFD_WM831X
+	help
+	  The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC
+	  daughtercard for the Samsung SMDK6410 reference platform.
+	  Enabling this option will build support for this module into
+	  the kernel.  The presence of the daughtercard will be
+	  detected at runtime so the the resulting kernel can be used
+	  with or without the 1192-EV1 fitted.
+
 config MACH_NCP
 	bool "NCP"
 	select CPU_S3C6410
diff --git a/arch/arm/plat-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index b85b4359e935..3758e15086be 100644
--- a/arch/arm/plat-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -1,4 +1,4 @@
-# arch/arm/plat-s3c64xx/Makefile
+# arch/arm/mach-s3c64xx/Makefile
 #
 # Copyright 2008 Openmoko, Inc.
 # Copyright 2008 Simtec Electronics
@@ -7,29 +7,25 @@
 
 obj-y				:=
 obj-m				:=
-obj-n				:= dummy.o
+obj-n				:=
 obj-				:=
 
 # Core files
-
-obj-y				+= dev-uart.o
 obj-y				+= cpu.o
-obj-y				+= irq.o
-obj-y				+= irq-eint.o
 obj-y				+= clock.o
 obj-y				+= gpiolib.o
 
-# CPU support
+# Core support for S3C6400 system
 
-obj-$(CONFIG_CPU_S3C6400_INIT)	+= s3c6400-init.o
-obj-$(CONFIG_CPU_S3C6400_CLOCK)	+= s3c6400-clock.o
-obj-$(CONFIG_CPU_FREQ_S3C64XX)  += cpufreq.o
+obj-$(CONFIG_CPU_S3C6400)	+= s3c6400.o
+obj-$(CONFIG_CPU_S3C6410)	+= s3c6410.o
 
-# PM support
+obj-y				+= irq.o
+obj-y				+= irq-eint.o
 
-obj-$(CONFIG_PM)		+= pm.o
-obj-$(CONFIG_PM)		+= sleep.o
-obj-$(CONFIG_PM)		+= irq-pm.o
+# CPU frequency scaling
+
+obj-$(CONFIG_CPU_FREQ_S3C64XX)  += cpufreq.o
 
 # DMA support
 
@@ -39,6 +35,28 @@ obj-$(CONFIG_S3C64XX_DMA)	+= dma.o
 
 obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
 obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
+obj-$(CONFIG_S3C64XX_SETUP_SDHCI) += setup-sdhci.o
 obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
 obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
-obj-$(CONFIG_SND_S3C24XX_SOC) += dev-audio.o
+
+# PM
+
+obj-$(CONFIG_PM)		+= pm.o
+obj-$(CONFIG_PM)		+= sleep.o
+obj-$(CONFIG_PM)		+= irq-pm.o
+
+# Machine support
+
+obj-$(CONFIG_MACH_ANW6410)	+= mach-anw6410.o
+obj-$(CONFIG_MACH_SMDK6400)	+= mach-smdk6400.o
+obj-$(CONFIG_MACH_SMDK6410)	+= mach-smdk6410.o
+obj-$(CONFIG_MACH_NCP)		+= mach-ncp.o
+obj-$(CONFIG_MACH_HMT)		+= mach-hmt.o
+
+# device support
+
+obj-y				+= dev-uart.o
+obj-y				+= dev-rtc.o
+obj-y				+= dev-audio.o
+obj-$(CONFIG_S3C_ADC)		+= dev-adc.o
+obj-$(CONFIG_S3C64XX_DEV_SPI)	+= dev-spi.o
diff --git a/arch/arm/mach-s3c6400/Makefile.boot b/arch/arm/mach-s3c64xx/Makefile.boot
index ba41fdc0a586..ba41fdc0a586 100644
--- a/arch/arm/mach-s3c6400/Makefile.boot
+++ b/arch/arm/mach-s3c64xx/Makefile.boot
diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
new file mode 100644
index 000000000000..2ac2e7d73e53
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/clock.c
@@ -0,0 +1,809 @@
+/* linux/arch/arm/plat-s3c64xx/clock.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX Base clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <mach/regs-sys.h>
+#include <mach/regs-clock.h>
+#include <mach/pll.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu-freq.h>
+#include <plat/clock.h>
+#include <plat/clock-clksrc.h>
+
+/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
+ * ext_xtal_mux for want of an actual name from the manual.
+*/
+
+static struct clk clk_ext_xtal_mux = {
+	.name		= "ext_xtal",
+	.id		= -1,
+};
+
+#define clk_fin_apll clk_ext_xtal_mux
+#define clk_fin_mpll clk_ext_xtal_mux
+#define clk_fin_epll clk_ext_xtal_mux
+
+#define clk_fout_mpll	clk_mpll
+#define clk_fout_epll	clk_epll
+
+struct clk clk_h2 = {
+	.name		= "hclk2",
+	.id		= -1,
+	.rate		= 0,
+};
+
+struct clk clk_27m = {
+	.name		= "clk_27m",
+	.id		= -1,
+	.rate		= 27000000,
+};
+
+static int clk_48m_ctrl(struct clk *clk, int enable)
+{
+	unsigned long flags;
+	u32 val;
+
+	/* can't rely on clock lock, this register has other usages */
+	local_irq_save(flags);
+
+	val = __raw_readl(S3C64XX_OTHERS);
+	if (enable)
+		val |= S3C64XX_OTHERS_USBMASK;
+	else
+		val &= ~S3C64XX_OTHERS_USBMASK;
+
+	__raw_writel(val, S3C64XX_OTHERS);
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+struct clk clk_48m = {
+	.name		= "clk_48m",
+	.id		= -1,
+	.rate		= 48000000,
+	.enable		= clk_48m_ctrl,
+};
+
+static int inline s3c64xx_gate(void __iomem *reg,
+				struct clk *clk,
+				int enable)
+{
+	unsigned int ctrlbit = clk->ctrlbit;
+	u32 con;
+
+	con = __raw_readl(reg);
+
+	if (enable)
+		con |= ctrlbit;
+	else
+		con &= ~ctrlbit;
+
+	__raw_writel(con, reg);
+	return 0;
+}
+
+static int s3c64xx_pclk_ctrl(struct clk *clk, int enable)
+{
+	return s3c64xx_gate(S3C_PCLK_GATE, clk, enable);
+}
+
+static int s3c64xx_hclk_ctrl(struct clk *clk, int enable)
+{
+	return s3c64xx_gate(S3C_HCLK_GATE, clk, enable);
+}
+
+int s3c64xx_sclk_ctrl(struct clk *clk, int enable)
+{
+	return s3c64xx_gate(S3C_SCLK_GATE, clk, enable);
+}
+
+static struct clk init_clocks_disable[] = {
+	{
+		.name		= "nand",
+		.id		= -1,
+		.parent		= &clk_h,
+	}, {
+		.name		= "adc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_TSADC,
+	}, {
+		.name		= "i2c",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_IIC,
+	}, {
+		.name		= "iis",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_IIS0,
+	}, {
+		.name		= "iis",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_IIS1,
+	}, {
+#ifdef CONFIG_CPU_S3C6410
+		.name		= "iis",
+		.id		= -1,  /* There's only one IISv4 port */
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C6410_CLKCON_PCLK_IIS2,
+	}, {
+#endif
+		.name		= "spi",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_SPI0,
+	}, {
+		.name		= "spi",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_SPI1,
+	}, {
+		.name		= "spi_48m",
+		.id		= 0,
+		.parent		= &clk_48m,
+		.enable		= s3c64xx_sclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_SCLK_SPI0_48,
+	}, {
+		.name		= "spi_48m",
+		.id		= 1,
+		.parent		= &clk_48m,
+		.enable		= s3c64xx_sclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_SCLK_SPI1_48,
+	}, {
+		.name		= "48m",
+		.id		= 0,
+		.parent		= &clk_48m,
+		.enable		= s3c64xx_sclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_SCLK_MMC0_48,
+	}, {
+		.name		= "48m",
+		.id		= 1,
+		.parent		= &clk_48m,
+		.enable		= s3c64xx_sclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_SCLK_MMC1_48,
+	}, {
+		.name		= "48m",
+		.id		= 2,
+		.parent		= &clk_48m,
+		.enable		= s3c64xx_sclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_SCLK_MMC2_48,
+	}, {
+		.name		= "dma0",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_DMA0,
+	}, {
+		.name		= "dma1",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_DMA1,
+	},
+};
+
+static struct clk init_clocks[] = {
+	{
+		.name		= "lcd",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_LCD,
+	}, {
+		.name		= "gpio",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_GPIO,
+	}, {
+		.name		= "usb-host",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_UHOST,
+	}, {
+		.name		= "hsmmc",
+		.id		= 0,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_HSMMC0,
+	}, {
+		.name		= "hsmmc",
+		.id		= 1,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_HSMMC1,
+	}, {
+		.name		= "hsmmc",
+		.id		= 2,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_HSMMC2,
+	}, {
+		.name		= "timers",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_PWM,
+	}, {
+		.name		= "uart",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_UART0,
+	}, {
+		.name		= "uart",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_UART1,
+	}, {
+		.name		= "uart",
+		.id		= 2,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_UART2,
+	}, {
+		.name		= "uart",
+		.id		= 3,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_UART3,
+	}, {
+		.name		= "rtc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_RTC,
+	}, {
+		.name		= "watchdog",
+		.id		= -1,
+		.parent		= &clk_p,
+		.ctrlbit	= S3C_CLKCON_PCLK_WDT,
+	}, {
+		.name		= "ac97",
+		.id		= -1,
+		.parent		= &clk_p,
+		.ctrlbit	= S3C_CLKCON_PCLK_AC97,
+	}
+};
+
+
+static struct clk clk_fout_apll = {
+	.name		= "fout_apll",
+	.id		= -1,
+};
+
+static struct clk *clk_src_apll_list[] = {
+	[0] = &clk_fin_apll,
+	[1] = &clk_fout_apll,
+};
+
+static struct clksrc_sources clk_src_apll = {
+	.sources	= clk_src_apll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_apll_list),
+};
+
+static struct clksrc_clk clk_mout_apll = {
+	.clk	= {
+		.name		= "mout_apll",
+		.id		= -1,
+	},
+	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 0, .size = 1  },
+	.sources	= &clk_src_apll,
+};
+
+static struct clk *clk_src_epll_list[] = {
+	[0] = &clk_fin_epll,
+	[1] = &clk_fout_epll,
+};
+
+static struct clksrc_sources clk_src_epll = {
+	.sources	= clk_src_epll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_epll_list),
+};
+
+static struct clksrc_clk clk_mout_epll = {
+	.clk	= {
+		.name		= "mout_epll",
+		.id		= -1,
+	},
+	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 2, .size = 1  },
+	.sources	= &clk_src_epll,
+};
+
+static struct clk *clk_src_mpll_list[] = {
+	[0] = &clk_fin_mpll,
+	[1] = &clk_fout_mpll,
+};
+
+static struct clksrc_sources clk_src_mpll = {
+	.sources	= clk_src_mpll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_mpll_list),
+};
+
+static struct clksrc_clk clk_mout_mpll = {
+	.clk = {
+		.name		= "mout_mpll",
+		.id		= -1,
+	},
+	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 1, .size = 1  },
+	.sources	= &clk_src_mpll,
+};
+
+static unsigned int armclk_mask;
+
+static unsigned long s3c64xx_clk_arm_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	u32 clkdiv;
+
+	/* divisor mask starts at bit0, so no need to shift */
+	clkdiv = __raw_readl(S3C_CLK_DIV0) & armclk_mask;
+
+	return rate / (clkdiv + 1);
+}
+
+static unsigned long s3c64xx_clk_arm_round_rate(struct clk *clk,
+						unsigned long rate)
+{
+	unsigned long parent = clk_get_rate(clk->parent);
+	u32 div;
+
+	if (parent < rate)
+		return parent;
+
+	div = (parent / rate) - 1;
+	if (div > armclk_mask)
+		div = armclk_mask;
+
+	return parent / (div + 1);
+}
+
+static int s3c64xx_clk_arm_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long parent = clk_get_rate(clk->parent);
+	u32 div;
+	u32 val;
+
+	if (rate < parent / (armclk_mask + 1))
+		return -EINVAL;
+
+	rate = clk_round_rate(clk, rate);
+	div = clk_get_rate(clk->parent) / rate;
+
+	val = __raw_readl(S3C_CLK_DIV0);
+	val &= ~armclk_mask;
+	val |= (div - 1);
+	__raw_writel(val, S3C_CLK_DIV0);
+
+	return 0;
+
+}
+
+static struct clk clk_arm = {
+	.name		= "armclk",
+	.id		= -1,
+	.parent		= &clk_mout_apll.clk,
+	.ops		= &(struct clk_ops) {
+		.get_rate	= s3c64xx_clk_arm_get_rate,
+		.set_rate	= s3c64xx_clk_arm_set_rate,
+		.round_rate	= s3c64xx_clk_arm_round_rate,
+	},
+};
+
+static unsigned long s3c64xx_clk_doutmpll_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+
+	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
+
+	if (__raw_readl(S3C_CLK_DIV0) & S3C6400_CLKDIV0_MPLL_MASK)
+		rate /= 2;
+
+	return rate;
+}
+
+static struct clk_ops clk_dout_ops = {
+	.get_rate	= s3c64xx_clk_doutmpll_get_rate,
+};
+
+static struct clk clk_dout_mpll = {
+	.name		= "dout_mpll",
+	.id		= -1,
+	.parent		= &clk_mout_mpll.clk,
+	.ops		= &clk_dout_ops,
+};
+
+static struct clk *clkset_spi_mmc_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+	&clk_fin_epll,
+	&clk_27m,
+};
+
+static struct clksrc_sources clkset_spi_mmc = {
+	.sources	= clkset_spi_mmc_list,
+	.nr_sources	= ARRAY_SIZE(clkset_spi_mmc_list),
+};
+
+static struct clk *clkset_irda_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+	NULL,
+	&clk_27m,
+};
+
+static struct clksrc_sources clkset_irda = {
+	.sources	= clkset_irda_list,
+	.nr_sources	= ARRAY_SIZE(clkset_irda_list),
+};
+
+static struct clk *clkset_uart_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+	NULL,
+	NULL
+};
+
+static struct clksrc_sources clkset_uart = {
+	.sources	= clkset_uart_list,
+	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
+};
+
+static struct clk *clkset_uhost_list[] = {
+	&clk_48m,
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+	&clk_fin_epll,
+};
+
+static struct clksrc_sources clkset_uhost = {
+	.sources	= clkset_uhost_list,
+	.nr_sources	= ARRAY_SIZE(clkset_uhost_list),
+};
+
+/* The peripheral clocks are all controlled via clocksource followed
+ * by an optional divider and gate stage. We currently roll this into
+ * one clock which hides the intermediate clock from the mux.
+ *
+ * Note, the JPEG clock can only be an even divider...
+ *
+ * The scaler and LCD clocks depend on the S3C64XX version, and also
+ * have a common parent divisor so are not included here.
+ */
+
+/* clocks that feed other parts of the clock source tree */
+
+static struct clk clk_iis_cd0 = {
+	.name		= "iis_cdclk0",
+	.id		= -1,
+};
+
+static struct clk clk_iis_cd1 = {
+	.name		= "iis_cdclk1",
+	.id		= -1,
+};
+
+static struct clk clk_pcm_cd = {
+	.name		= "pcm_cdclk",
+	.id		= -1,
+};
+
+static struct clk *clkset_audio0_list[] = {
+	[0] = &clk_mout_epll.clk,
+	[1] = &clk_dout_mpll,
+	[2] = &clk_fin_epll,
+	[3] = &clk_iis_cd0,
+	[4] = &clk_pcm_cd,
+};
+
+static struct clksrc_sources clkset_audio0 = {
+	.sources	= clkset_audio0_list,
+	.nr_sources	= ARRAY_SIZE(clkset_audio0_list),
+};
+
+static struct clk *clkset_audio1_list[] = {
+	[0] = &clk_mout_epll.clk,
+	[1] = &clk_dout_mpll,
+	[2] = &clk_fin_epll,
+	[3] = &clk_iis_cd1,
+	[4] = &clk_pcm_cd,
+};
+
+static struct clksrc_sources clkset_audio1 = {
+	.sources	= clkset_audio1_list,
+	.nr_sources	= ARRAY_SIZE(clkset_audio1_list),
+};
+
+static struct clk *clkset_camif_list[] = {
+	&clk_h2,
+};
+
+static struct clksrc_sources clkset_camif = {
+	.sources	= clkset_camif_list,
+	.nr_sources	= ARRAY_SIZE(clkset_camif_list),
+};
+
+static struct clksrc_clk clksrcs[] = {
+	{
+		.clk	= {
+			.name		= "mmc_bus",
+			.id		= 0,
+			.ctrlbit        = S3C_CLKCON_SCLK_MMC0,
+			.enable		= s3c64xx_sclk_ctrl,
+		},
+		.reg_src	= { .reg = S3C_CLK_SRC, .shift = 18, .size = 2  },
+		.reg_div	= { .reg = S3C_CLK_DIV1, .shift = 0, .size = 4  },
+		.sources	= &clkset_spi_mmc,
+	}, {
+		.clk	= {
+			.name		= "mmc_bus",
+			.id		= 1,
+			.ctrlbit        = S3C_CLKCON_SCLK_MMC1,
+			.enable		= s3c64xx_sclk_ctrl,
+		},
+		.reg_src	= { .reg = S3C_CLK_SRC, .shift = 20, .size = 2  },
+		.reg_div	= { .reg = S3C_CLK_DIV1, .shift = 4, .size = 4  },
+		.sources	= &clkset_spi_mmc,
+	}, {
+		.clk	= {
+			.name		= "mmc_bus",
+			.id		= 2,
+			.ctrlbit        = S3C_CLKCON_SCLK_MMC2,
+			.enable		= s3c64xx_sclk_ctrl,
+		},
+		.reg_src	= { .reg = S3C_CLK_SRC, .shift = 22, .size = 2  },
+		.reg_div 	= { .reg = S3C_CLK_DIV1, .shift = 8, .size = 4  },
+		.sources	= &clkset_spi_mmc,
+	}, {
+		.clk	= {
+			.name		= "usb-bus-host",
+			.id		= -1,
+			.ctrlbit        = S3C_CLKCON_SCLK_UHOST,
+			.enable		= s3c64xx_sclk_ctrl,
+		},
+		.reg_src 	= { .reg = S3C_CLK_SRC, .shift = 5, .size = 2  },
+		.reg_div	= { .reg = S3C_CLK_DIV1, .shift = 20, .size = 4  },
+		.sources	= &clkset_uhost,
+	}, {
+		.clk	= {
+			.name		= "uclk1",
+			.id		= -1,
+			.ctrlbit        = S3C_CLKCON_SCLK_UART,
+			.enable		= s3c64xx_sclk_ctrl,
+		},
+		.reg_src	= { .reg = S3C_CLK_SRC, .shift = 13, .size = 1  },
+		.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 16, .size = 4  },
+		.sources	= &clkset_uart,
+	}, {
+/* Where does UCLK0 come from? */
+		.clk	= {
+			.name		= "spi-bus",
+			.id		= 0,
+			.ctrlbit        = S3C_CLKCON_SCLK_SPI0,
+			.enable		= s3c64xx_sclk_ctrl,
+		},
+		.reg_src	= { .reg = S3C_CLK_SRC, .shift = 14, .size = 2  },
+		.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 0, .size = 4  },
+		.sources	= &clkset_spi_mmc,
+	}, {
+		.clk	= {
+			.name		= "spi-bus",
+			.id		= 1,
+			.ctrlbit        = S3C_CLKCON_SCLK_SPI1,
+			.enable		= s3c64xx_sclk_ctrl,
+		},
+		.reg_src	= { .reg = S3C_CLK_SRC, .shift = 16, .size = 2  },
+		.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 4, .size = 4  },
+		.sources	= &clkset_spi_mmc,
+	}, {
+		.clk	= {
+			.name		= "audio-bus",
+			.id		= 0,
+			.ctrlbit        = S3C_CLKCON_SCLK_AUDIO0,
+			.enable		= s3c64xx_sclk_ctrl,
+		},
+		.reg_src	= { .reg = S3C_CLK_SRC, .shift = 7, .size = 3  },
+		.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 8, .size = 4  },
+		.sources	= &clkset_audio0,
+	}, {
+		.clk	= {
+			.name		= "audio-bus",
+			.id		= 1,
+			.ctrlbit        = S3C_CLKCON_SCLK_AUDIO1,
+			.enable		= s3c64xx_sclk_ctrl,
+		},
+		.reg_src	= { .reg = S3C_CLK_SRC, .shift = 10, .size = 3  },
+		.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 12, .size = 4  },
+		.sources	= &clkset_audio1,
+	}, {
+		.clk	= {
+			.name		= "irda-bus",
+			.id		= 0,
+			.ctrlbit        = S3C_CLKCON_SCLK_IRDA,
+			.enable		= s3c64xx_sclk_ctrl,
+		},
+		.reg_src	= { .reg = S3C_CLK_SRC, .shift = 24, .size = 2  },
+		.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 20, .size = 4  },
+		.sources	= &clkset_irda,
+	}, {
+		.clk	= {
+			.name		= "camera",
+			.id		= -1,
+			.ctrlbit        = S3C_CLKCON_SCLK_CAM,
+			.enable		= s3c64xx_sclk_ctrl,
+		},
+		.reg_div	= { .reg = S3C_CLK_DIV0, .shift = 20, .size = 4  },
+		.reg_src	= { .reg = NULL, .shift = 0, .size = 0  },
+		.sources	= &clkset_camif,
+	},
+};
+
+/* Clock initialisation code */
+
+static struct clksrc_clk *init_parents[] = {
+	&clk_mout_apll,
+	&clk_mout_epll,
+	&clk_mout_mpll,
+};
+
+#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
+
+void __init_or_cpufreq s3c6400_setup_clocks(void)
+{
+	struct clk *xtal_clk;
+	unsigned long xtal;
+	unsigned long fclk;
+	unsigned long hclk;
+	unsigned long hclk2;
+	unsigned long pclk;
+	unsigned long epll;
+	unsigned long apll;
+	unsigned long mpll;
+	unsigned int ptr;
+	u32 clkdiv0;
+
+	printk(KERN_DEBUG "%s: registering clocks\n", __func__);
+
+	clkdiv0 = __raw_readl(S3C_CLK_DIV0);
+	printk(KERN_DEBUG "%s: clkdiv0 = %08x\n", __func__, clkdiv0);
+
+	xtal_clk = clk_get(NULL, "xtal");
+	BUG_ON(IS_ERR(xtal_clk));
+
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
+
+	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
+
+	/* For now assume the mux always selects the crystal */
+	clk_ext_xtal_mux.parent = xtal_clk;
+
+	epll = s3c6400_get_epll(xtal);
+	mpll = s3c6400_get_pll(xtal, __raw_readl(S3C_MPLL_CON));
+	apll = s3c6400_get_pll(xtal, __raw_readl(S3C_APLL_CON));
+
+	fclk = mpll;
+
+	printk(KERN_INFO "S3C64XX: PLL settings, A=%ld, M=%ld, E=%ld\n",
+	       apll, mpll, epll);
+
+	hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
+	hclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK);
+	pclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_PCLK);
+
+	printk(KERN_INFO "S3C64XX: HCLK2=%ld, HCLK=%ld, PCLK=%ld\n",
+	       hclk2, hclk, pclk);
+
+	clk_fout_mpll.rate = mpll;
+	clk_fout_epll.rate = epll;
+	clk_fout_apll.rate = apll;
+
+	clk_h2.rate = hclk2;
+	clk_h.rate = hclk;
+	clk_p.rate = pclk;
+	clk_f.rate = fclk;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
+		s3c_set_clksrc(init_parents[ptr], true);
+
+	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+		s3c_set_clksrc(&clksrcs[ptr], true);
+}
+
+static struct clk *clks1[] __initdata = {
+	&clk_ext_xtal_mux,
+	&clk_iis_cd0,
+	&clk_iis_cd1,
+	&clk_pcm_cd,
+	&clk_mout_epll.clk,
+	&clk_mout_mpll.clk,
+	&clk_dout_mpll,
+	&clk_arm,
+};
+
+static struct clk *clks[] __initdata = {
+	&clk_ext,
+	&clk_epll,
+	&clk_27m,
+	&clk_48m,
+	&clk_h2,
+};
+
+/**
+ * s3c64xx_register_clocks - register clocks for s3c6400 and s3c6410
+ * @xtal: The rate for the clock crystal feeding the PLLs.
+ * @armclk_divlimit: Divisor mask for ARMCLK.
+ *
+ * Register the clocks for the S3C6400 and S3C6410 SoC range, such
+ * as ARMCLK as well as the necessary parent clocks.
+ *
+ * This call does not setup the clocks, which is left to the
+ * s3c6400_setup_clocks() call which may be needed by the cpufreq
+ * or resume code to re-set the clocks if the bootloader has changed
+ * them.
+ */
+void __init s3c64xx_register_clocks(unsigned long xtal, 
+				    unsigned armclk_divlimit)
+{
+	struct clk *clkp;
+	int ret;
+	int ptr;
+
+	armclk_mask = armclk_divlimit;
+
+	s3c24xx_register_baseclocks(xtal);
+	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
+
+	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+
+	clkp = init_clocks_disable;
+	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+
+		(clkp->enable)(clkp, 0);
+	}
+
+	s3c24xx_register_clocks(clks1, ARRAY_SIZE(clks1));
+	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+	s3c_pwmclk_init();
+}
diff --git a/arch/arm/plat-s3c64xx/cpu.c b/arch/arm/mach-s3c64xx/cpu.c
index 49796d2db86d..374e45e566b8 100644
--- a/arch/arm/plat-s3c64xx/cpu.c
+++ b/arch/arm/mach-s3c64xx/cpu.c
@@ -33,8 +33,8 @@
 #include <plat/devs.h>
 #include <plat/clock.h>
 
-#include <plat/s3c6400.h>
-#include <plat/s3c6410.h>
+#include <mach/s3c6400.h>
+#include <mach/s3c6410.h>
 
 /* table of supported CPUs */
 
@@ -73,17 +73,22 @@ static struct map_desc s3c_iodesc[] __initdata = {
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
 	}, {
+		.virtual	= (unsigned long)S3C_VA_MEM,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_SROM),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
 		.virtual	= (unsigned long)(S3C_VA_UART + UART_OFFS),
 		.pfn		= __phys_to_pfn(S3C_PA_UART),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= (unsigned long)S3C_VA_VIC0,
+		.virtual	= (unsigned long)VA_VIC0,
 		.pfn		= __phys_to_pfn(S3C64XX_PA_VIC0),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= (unsigned long)S3C_VA_VIC1,
+		.virtual	= (unsigned long)VA_VIC1,
 		.pfn		= __phys_to_pfn(S3C64XX_PA_VIC1),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
@@ -124,6 +129,12 @@ static struct sys_device s3c64xx_sysdev = {
 	.cls	= &s3c64xx_sysclass,
 };
 
+/* uart registration process */
+
+void __init s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no);
+}
 
 /* read cpu identification code */
 
diff --git a/arch/arm/plat-s3c64xx/cpufreq.c b/arch/arm/mach-s3c64xx/cpufreq.c
index 74c0e8347de5..74c0e8347de5 100644
--- a/arch/arm/plat-s3c64xx/cpufreq.c
+++ b/arch/arm/mach-s3c64xx/cpufreq.c
diff --git a/arch/arm/mach-s3c64xx/dev-adc.c b/arch/arm/mach-s3c64xx/dev-adc.c
new file mode 100644
index 000000000000..fafef9b6bcfa
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/dev-adc.c
@@ -0,0 +1,46 @@
+/* linux/arch/arm/plat-s3c64xx/dev-adc.c
+ *
+ * Copyright 2010 Maurus Cuelenaere
+ *
+ * S3C64xx series device definition for ADC device
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/adc.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+static struct resource s3c_adc_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_ADC,
+		.end   = S3C64XX_PA_ADC + SZ_256 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TC,
+		.end   = IRQ_TC,
+		.flags = IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start = IRQ_ADC,
+		.end   = IRQ_ADC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s3c_device_adc = {
+	.name		= "s3c64xx-adc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_adc_resource),
+	.resource	= s3c_adc_resource,
+};
diff --git a/arch/arm/mach-s3c64xx/dev-audio.c b/arch/arm/mach-s3c64xx/dev-audio.c
new file mode 100644
index 000000000000..c3e9e73bd0f9
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/dev-audio.c
@@ -0,0 +1,335 @@
+/* linux/arch/arm/plat-s3c/dev-audio.c
+ *
+ * Copyright 2009 Wolfson Microelectronics
+ *      Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+#include <mach/dma.h>
+#include <mach/gpio.h>
+
+#include <plat/devs.h>
+#include <plat/audio.h>
+#include <plat/gpio-cfg.h>
+
+#include <mach/gpio-bank-c.h>
+#include <mach/gpio-bank-d.h>
+#include <mach/gpio-bank-e.h>
+#include <mach/gpio-bank-h.h>
+
+static int s3c64xx_i2sv3_cfg_gpio(struct platform_device *pdev)
+{
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_I2S0_CLK);
+		s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_I2S0_CDCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPD(2), S3C64XX_GPD2_I2S0_LRCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPD(3), S3C64XX_GPD3_I2S0_DI);
+		s3c_gpio_cfgpin(S3C64XX_GPD(4), S3C64XX_GPD4_I2S0_D0);
+		break;
+	case 1:
+		s3c_gpio_cfgpin(S3C64XX_GPE(0), S3C64XX_GPE0_I2S1_CLK);
+		s3c_gpio_cfgpin(S3C64XX_GPE(1), S3C64XX_GPE1_I2S1_CDCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPE(2), S3C64XX_GPE2_I2S1_LRCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPE(3), S3C64XX_GPE3_I2S1_DI);
+		s3c_gpio_cfgpin(S3C64XX_GPE(4), S3C64XX_GPE4_I2S1_D0);
+	default:
+		printk(KERN_DEBUG "Invalid I2S Controller number!");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int s3c64xx_i2sv4_cfg_gpio(struct platform_device *pdev)
+{
+	s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C64XX_GPC4_I2S_V40_DO0);
+	s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C64XX_GPC5_I2S_V40_DO1);
+	s3c_gpio_cfgpin(S3C64XX_GPC(7), S3C64XX_GPC7_I2S_V40_DO2);
+	s3c_gpio_cfgpin(S3C64XX_GPH(6), S3C64XX_GPH6_I2S_V40_BCLK);
+	s3c_gpio_cfgpin(S3C64XX_GPH(7), S3C64XX_GPH7_I2S_V40_CDCLK);
+	s3c_gpio_cfgpin(S3C64XX_GPH(8), S3C64XX_GPH8_I2S_V40_LRCLK);
+	s3c_gpio_cfgpin(S3C64XX_GPH(9), S3C64XX_GPH9_I2S_V40_DI);
+
+	return 0;
+}
+
+static struct resource s3c64xx_iis0_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_IIS0,
+		.end   = S3C64XX_PA_IIS0 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_I2S0_OUT,
+		.end   = DMACH_I2S0_OUT,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_I2S0_IN,
+		.end   = DMACH_I2S0_IN,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct s3c_audio_pdata s3c_i2s0_pdata = {
+	.cfg_gpio = s3c64xx_i2sv3_cfg_gpio,
+};
+
+struct platform_device s3c64xx_device_iis0 = {
+	.name		  = "s3c64xx-iis",
+	.id		  = 0,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_iis0_resource),
+	.resource	  = s3c64xx_iis0_resource,
+	.dev = {
+		.platform_data = &s3c_i2s0_pdata,
+	},
+};
+EXPORT_SYMBOL(s3c64xx_device_iis0);
+
+static struct resource s3c64xx_iis1_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_IIS1,
+		.end   = S3C64XX_PA_IIS1 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_I2S1_OUT,
+		.end   = DMACH_I2S1_OUT,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_I2S1_IN,
+		.end   = DMACH_I2S1_IN,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct s3c_audio_pdata s3c_i2s1_pdata = {
+	.cfg_gpio = s3c64xx_i2sv3_cfg_gpio,
+};
+
+struct platform_device s3c64xx_device_iis1 = {
+	.name		  = "s3c64xx-iis",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_iis1_resource),
+	.resource	  = s3c64xx_iis1_resource,
+	.dev = {
+		.platform_data = &s3c_i2s1_pdata,
+	},
+};
+EXPORT_SYMBOL(s3c64xx_device_iis1);
+
+static struct resource s3c64xx_iisv4_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_IISV4,
+		.end   = S3C64XX_PA_IISV4 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_HSI_I2SV40_TX,
+		.end   = DMACH_HSI_I2SV40_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_HSI_I2SV40_RX,
+		.end   = DMACH_HSI_I2SV40_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct s3c_audio_pdata s3c_i2sv4_pdata = {
+	.cfg_gpio = s3c64xx_i2sv4_cfg_gpio,
+};
+
+struct platform_device s3c64xx_device_iisv4 = {
+	.name		  = "s3c64xx-iis-v4",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_iisv4_resource),
+	.resource	  = s3c64xx_iisv4_resource,
+	.dev = {
+		.platform_data = &s3c_i2sv4_pdata,
+	},
+};
+EXPORT_SYMBOL(s3c64xx_device_iisv4);
+
+
+/* PCM Controller platform_devices */
+
+static int s3c64xx_pcm_cfg_gpio(struct platform_device *pdev)
+{
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_PCM0_SCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_PCM0_EXTCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPD(2), S3C64XX_GPD2_PCM0_FSYNC);
+		s3c_gpio_cfgpin(S3C64XX_GPD(3), S3C64XX_GPD3_PCM0_SIN);
+		s3c_gpio_cfgpin(S3C64XX_GPD(4), S3C64XX_GPD4_PCM0_SOUT);
+		break;
+	case 1:
+		s3c_gpio_cfgpin(S3C64XX_GPE(0), S3C64XX_GPE0_PCM1_SCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPE(1), S3C64XX_GPE1_PCM1_EXTCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPE(2), S3C64XX_GPE2_PCM1_FSYNC);
+		s3c_gpio_cfgpin(S3C64XX_GPE(3), S3C64XX_GPE3_PCM1_SIN);
+		s3c_gpio_cfgpin(S3C64XX_GPE(4), S3C64XX_GPE4_PCM1_SOUT);
+		break;
+	default:
+		printk(KERN_DEBUG "Invalid PCM Controller number!");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct resource s3c64xx_pcm0_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_PCM0,
+		.end   = S3C64XX_PA_PCM0 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_PCM0_TX,
+		.end   = DMACH_PCM0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_PCM0_RX,
+		.end   = DMACH_PCM0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct s3c_audio_pdata s3c_pcm0_pdata = {
+	.cfg_gpio = s3c64xx_pcm_cfg_gpio,
+};
+
+struct platform_device s3c64xx_device_pcm0 = {
+	.name		  = "samsung-pcm",
+	.id		  = 0,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_pcm0_resource),
+	.resource	  = s3c64xx_pcm0_resource,
+	.dev = {
+		.platform_data = &s3c_pcm0_pdata,
+	},
+};
+EXPORT_SYMBOL(s3c64xx_device_pcm0);
+
+static struct resource s3c64xx_pcm1_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_PCM1,
+		.end   = S3C64XX_PA_PCM1 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_PCM1_TX,
+		.end   = DMACH_PCM1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_PCM1_RX,
+		.end   = DMACH_PCM1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct s3c_audio_pdata s3c_pcm1_pdata = {
+	.cfg_gpio = s3c64xx_pcm_cfg_gpio,
+};
+
+struct platform_device s3c64xx_device_pcm1 = {
+	.name		  = "samsung-pcm",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_pcm1_resource),
+	.resource	  = s3c64xx_pcm1_resource,
+	.dev = {
+		.platform_data = &s3c_pcm1_pdata,
+	},
+};
+EXPORT_SYMBOL(s3c64xx_device_pcm1);
+
+/* AC97 Controller platform devices */
+
+static int s3c64xx_ac97_cfg_gpd(struct platform_device *pdev)
+{
+	s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_AC97_BITCLK);
+	s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_AC97_nRESET);
+	s3c_gpio_cfgpin(S3C64XX_GPD(2), S3C64XX_GPD2_AC97_SYNC);
+	s3c_gpio_cfgpin(S3C64XX_GPD(3), S3C64XX_GPD3_AC97_SDI);
+	s3c_gpio_cfgpin(S3C64XX_GPD(4), S3C64XX_GPD4_AC97_SDO);
+
+	return 0;
+}
+
+static int s3c64xx_ac97_cfg_gpe(struct platform_device *pdev)
+{
+	s3c_gpio_cfgpin(S3C64XX_GPE(0), S3C64XX_GPE0_AC97_BITCLK);
+	s3c_gpio_cfgpin(S3C64XX_GPE(1), S3C64XX_GPE1_AC97_nRESET);
+	s3c_gpio_cfgpin(S3C64XX_GPE(2), S3C64XX_GPE2_AC97_SYNC);
+	s3c_gpio_cfgpin(S3C64XX_GPE(3), S3C64XX_GPE3_AC97_SDI);
+	s3c_gpio_cfgpin(S3C64XX_GPE(4), S3C64XX_GPE4_AC97_SDO);
+
+	return 0;
+}
+
+static struct resource s3c64xx_ac97_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_AC97,
+		.end   = S3C64XX_PA_AC97 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_AC97_PCMOUT,
+		.end   = DMACH_AC97_PCMOUT,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_AC97_PCMIN,
+		.end   = DMACH_AC97_PCMIN,
+		.flags = IORESOURCE_DMA,
+	},
+	[3] = {
+		.start = DMACH_AC97_MICIN,
+		.end   = DMACH_AC97_MICIN,
+		.flags = IORESOURCE_DMA,
+	},
+	[4] = {
+		.start = IRQ_AC97,
+		.end   = IRQ_AC97,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c_audio_pdata s3c_ac97_pdata;
+
+static u64 s3c64xx_ac97_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s3c64xx_device_ac97 = {
+	.name		  = "s3c-ac97",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_ac97_resource),
+	.resource	  = s3c64xx_ac97_resource,
+	.dev = {
+		.platform_data = &s3c_ac97_pdata,
+		.dma_mask = &s3c64xx_ac97_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
+EXPORT_SYMBOL(s3c64xx_device_ac97);
+
+void __init s3c64xx_ac97_setup_gpio(int num)
+{
+	if (num == S3C64XX_AC97_GPD)
+		s3c_ac97_pdata.cfg_gpio = s3c64xx_ac97_cfg_gpd;
+	else
+		s3c_ac97_pdata.cfg_gpio = s3c64xx_ac97_cfg_gpe;
+}
diff --git a/arch/arm/mach-s3c64xx/dev-rtc.c b/arch/arm/mach-s3c64xx/dev-rtc.c
new file mode 100644
index 000000000000..b9e7a05f0129
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/dev-rtc.c
@@ -0,0 +1,43 @@
+/* linux/arch/arm/plat-s3c64xx/dev-rtc.c
+ *
+ * Copyright 2009 by Maurus Cuelenaere <mcuelenaere@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+static struct resource s3c_rtc_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_RTC,
+		.end   = S3C64XX_PA_RTC + 0xff,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_RTC_ALARM,
+		.end   = IRQ_RTC_ALARM,
+		.flags = IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start = IRQ_RTC_TIC,
+		.end   = IRQ_RTC_TIC,
+		.flags = IORESOURCE_IRQ
+	}
+};
+
+struct platform_device s3c_device_rtc = {
+	.name		  = "s3c64xx-rtc",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s3c_rtc_resource),
+	.resource	  = s3c_rtc_resource,
+};
+EXPORT_SYMBOL(s3c_device_rtc);
diff --git a/arch/arm/mach-s3c64xx/dev-spi.c b/arch/arm/mach-s3c64xx/dev-spi.c
new file mode 100644
index 000000000000..29c32d088515
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/dev-spi.c
@@ -0,0 +1,182 @@
+/* linux/arch/arm/plat-s3c64xx/dev-spi.c
+ *
+ * Copyright (C) 2009 Samsung Electronics Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <mach/dma.h>
+#include <mach/map.h>
+#include <mach/gpio.h>
+#include <mach/gpio-bank-c.h>
+#include <mach/spi-clocks.h>
+
+#include <plat/s3c64xx-spi.h>
+#include <plat/gpio-cfg.h>
+#include <plat/irqs.h>
+
+static char *spi_src_clks[] = {
+	[S3C64XX_SPI_SRCCLK_PCLK] = "pclk",
+	[S3C64XX_SPI_SRCCLK_SPIBUS] = "spi-bus",
+	[S3C64XX_SPI_SRCCLK_48M] = "spi_48m",
+};
+
+/* SPI Controller platform_devices */
+
+/* Since we emulate multi-cs capability, we do not touch the GPC-3,7.
+ * The emulated CS is toggled by board specific mechanism, as it can
+ * be either some immediate GPIO or some signal out of some other
+ * chip in between ... or some yet another way.
+ * We simply do not assume anything about CS.
+ */
+static int s3c64xx_spi_cfg_gpio(struct platform_device *pdev)
+{
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin(S3C64XX_GPC(0), S3C64XX_GPC0_SPI_MISO0);
+		s3c_gpio_cfgpin(S3C64XX_GPC(1), S3C64XX_GPC1_SPI_CLKO);
+		s3c_gpio_cfgpin(S3C64XX_GPC(2), S3C64XX_GPC2_SPI_MOSIO);
+		s3c_gpio_setpull(S3C64XX_GPC(0), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S3C64XX_GPC(1), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S3C64XX_GPC(2), S3C_GPIO_PULL_UP);
+		break;
+
+	case 1:
+		s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C64XX_GPC4_SPI_MISO1);
+		s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C64XX_GPC5_SPI_CLK1);
+		s3c_gpio_cfgpin(S3C64XX_GPC(6), S3C64XX_GPC6_SPI_MOSI1);
+		s3c_gpio_setpull(S3C64XX_GPC(4), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S3C64XX_GPC(5), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S3C64XX_GPC(6), S3C_GPIO_PULL_UP);
+		break;
+
+	default:
+		dev_err(&pdev->dev, "Invalid SPI Controller number!");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct resource s3c64xx_spi0_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_SPI0,
+		.end   = S3C64XX_PA_SPI0 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_SPI0_TX,
+		.end   = DMACH_SPI0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_SPI0_RX,
+		.end   = DMACH_SPI0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+	[3] = {
+		.start = IRQ_SPI0,
+		.end   = IRQ_SPI0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c64xx_spi_info s3c64xx_spi0_pdata = {
+	.cfg_gpio = s3c64xx_spi_cfg_gpio,
+	.fifo_lvl_mask = 0x7f,
+	.rx_lvl_offset = 13,
+};
+
+static u64 spi_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s3c64xx_device_spi0 = {
+	.name		  = "s3c64xx-spi",
+	.id		  = 0,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_spi0_resource),
+	.resource	  = s3c64xx_spi0_resource,
+	.dev = {
+		.dma_mask		= &spi_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data = &s3c64xx_spi0_pdata,
+	},
+};
+EXPORT_SYMBOL(s3c64xx_device_spi0);
+
+static struct resource s3c64xx_spi1_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_SPI1,
+		.end   = S3C64XX_PA_SPI1 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_SPI1_TX,
+		.end   = DMACH_SPI1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_SPI1_RX,
+		.end   = DMACH_SPI1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+	[3] = {
+		.start = IRQ_SPI1,
+		.end   = IRQ_SPI1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c64xx_spi_info s3c64xx_spi1_pdata = {
+	.cfg_gpio = s3c64xx_spi_cfg_gpio,
+	.fifo_lvl_mask = 0x7f,
+	.rx_lvl_offset = 13,
+};
+
+struct platform_device s3c64xx_device_spi1 = {
+	.name		  = "s3c64xx-spi",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_spi1_resource),
+	.resource	  = s3c64xx_spi1_resource,
+	.dev = {
+		.dma_mask		= &spi_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data = &s3c64xx_spi1_pdata,
+	},
+};
+EXPORT_SYMBOL(s3c64xx_device_spi1);
+
+void __init s3c64xx_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
+{
+	struct s3c64xx_spi_info *pd;
+
+	/* Reject invalid configuration */
+	if (!num_cs || src_clk_nr < 0
+			|| src_clk_nr > S3C64XX_SPI_SRCCLK_48M) {
+		printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__);
+		return;
+	}
+
+	switch (cntrlr) {
+	case 0:
+		pd = &s3c64xx_spi0_pdata;
+		break;
+	case 1:
+		pd = &s3c64xx_spi1_pdata;
+		break;
+	default:
+		printk(KERN_ERR "%s: Invalid SPI controller(%d)\n",
+							__func__, cntrlr);
+		return;
+	}
+
+	pd->num_cs = num_cs;
+	pd->src_clk_nr = src_clk_nr;
+	pd->src_clk_name = spi_src_clks[src_clk_nr];
+}
diff --git a/arch/arm/plat-s3c64xx/dev-uart.c b/arch/arm/mach-s3c64xx/dev-uart.c
index 62c11a6fc7ba..f797f748b999 100644
--- a/arch/arm/plat-s3c64xx/dev-uart.c
+++ b/arch/arm/mach-s3c64xx/dev-uart.c
@@ -145,32 +145,3 @@ struct s3c24xx_uart_resources s3c64xx_uart_resources[] __initdata = {
 		.nr_resources	= ARRAY_SIZE(s3c64xx_uart3_resource),
 	},
 };
-
-/* uart devices */
-
-static struct platform_device s3c24xx_uart_device0 = {
-	.id		= 0,
-};
-
-static struct platform_device s3c24xx_uart_device1 = {
-	.id		= 1,
-};
-
-static struct platform_device s3c24xx_uart_device2 = {
-	.id		= 2,
-};
-
-static struct platform_device s3c24xx_uart_device3 = {
-	.id		= 3,
-};
-
-struct platform_device *s3c24xx_uart_src[4] = {
-	&s3c24xx_uart_device0,
-	&s3c24xx_uart_device1,
-	&s3c24xx_uart_device2,
-	&s3c24xx_uart_device3,
-};
-
-struct platform_device *s3c24xx_uart_devs[4] = {
-};
-
diff --git a/arch/arm/plat-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c
index d554b936fcfb..b62bdf18dca4 100644
--- a/arch/arm/plat-s3c64xx/dma.c
+++ b/arch/arm/mach-s3c64xx/dma.c
@@ -27,8 +27,7 @@
 #include <mach/map.h>
 #include <mach/irqs.h>
 
-#include <plat/dma-plat.h>
-#include <plat/regs-sys.h>
+#include <mach/regs-sys.h>
 
 #include <asm/hardware/pl080.h>
 
diff --git a/arch/arm/plat-s3c64xx/gpiolib.c b/arch/arm/mach-s3c64xx/gpiolib.c
index 778560457277..66e6794481d2 100644
--- a/arch/arm/plat-s3c64xx/gpiolib.c
+++ b/arch/arm/mach-s3c64xx/gpiolib.c
@@ -18,11 +18,11 @@
 
 #include <mach/map.h>
 #include <mach/gpio.h>
-#include <mach/gpio-core.h>
 
+#include <plat/gpio-core.h>
 #include <plat/gpio-cfg.h>
 #include <plat/gpio-cfg-helpers.h>
-#include <plat/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
 /* GPIO bank summary:
  *
@@ -49,150 +49,6 @@
  * [2] BANK has two control registers, GPxCON0 and GPxCON1
  */
 
-#define OFF_GPCON	(0x00)
-#define OFF_GPDAT	(0x04)
-
-#define con_4bit_shift(__off) ((__off) * 4)
-
-#if 1
-#define gpio_dbg(x...) do { } while(0)
-#else
-#define gpio_dbg(x...) printk(KERN_DEBUG x)
-#endif
-
-/* The s3c64xx_gpiolib_4bit routines are to control the gpio banks where
- * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the
- * following example:
- *
- * base + 0x00: Control register, 4 bits per gpio
- *	        gpio n: 4 bits starting at (4*n)
- *		0000 = input, 0001 = output, others mean special-function
- * base + 0x04: Data register, 1 bit per gpio
- *		bit n: data bit n
- *
- * Note, since the data register is one bit per gpio and is at base + 0x4
- * we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of
- * the output.
-*/
-
-static int s3c64xx_gpiolib_4bit_input(struct gpio_chip *chip, unsigned offset)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long con;
-
-	con = __raw_readl(base + OFF_GPCON);
-	con &= ~(0xf << con_4bit_shift(offset));
-	__raw_writel(con, base + OFF_GPCON);
-
-	gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con);
-
-	return 0;
-}
-
-static int s3c64xx_gpiolib_4bit_output(struct gpio_chip *chip,
-				       unsigned offset, int value)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long con;
-	unsigned long dat;
-
-	con = __raw_readl(base + OFF_GPCON);
-	con &= ~(0xf << con_4bit_shift(offset));
-	con |= 0x1 << con_4bit_shift(offset);
-
-	dat = __raw_readl(base + OFF_GPDAT);
-	if (value)
-		dat |= 1 << offset;
-	else
-		dat &= ~(1 << offset);
-
-	__raw_writel(dat, base + OFF_GPDAT);
-	__raw_writel(con, base + OFF_GPCON);
-	__raw_writel(dat, base + OFF_GPDAT);
-
-	gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
-
-	return 0;
-}
-
-/* The next set of routines are for the case where the GPIO configuration
- * registers are 4 bits per GPIO but there is more than one register (the
- * bank has more than 8 GPIOs.
- *
- * This case is the similar to the 4 bit case, but the registers are as
- * follows:
- *
- * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs)
- *	        gpio n: 4 bits starting at (4*n)
- *		0000 = input, 0001 = output, others mean special-function
- * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs)
- *	        gpio n: 4 bits starting at (4*n)
- *		0000 = input, 0001 = output, others mean special-function
- * base + 0x08: Data register, 1 bit per gpio
- *		bit n: data bit n
- *
- * To allow us to use the s3c_gpiolib_get and s3c_gpiolib_set routines we
- * store the 'base + 0x4' address so that these routines see the data
- * register at ourchip->base + 0x04.
-*/
-
-static int s3c64xx_gpiolib_4bit2_input(struct gpio_chip *chip, unsigned offset)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	void __iomem *regcon = base;
-	unsigned long con;
-
-	if (offset > 7)
-		offset -= 8;
-	else
-		regcon -= 4;
-
-	con = __raw_readl(regcon);
-	con &= ~(0xf << con_4bit_shift(offset));
-	__raw_writel(con, regcon);
-
-	gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con);
-
-	return 0;
-
-}
-
-static int s3c64xx_gpiolib_4bit2_output(struct gpio_chip *chip,
-				       unsigned offset, int value)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	void __iomem *regcon = base;
-	unsigned long con;
-	unsigned long dat;
-
-	if (offset > 7)
-		offset -= 8;
-	else
-		regcon -= 4;
-
-	con = __raw_readl(regcon);
-	con &= ~(0xf << con_4bit_shift(offset));
-	con |= 0x1 << con_4bit_shift(offset);
-
-	dat = __raw_readl(base + OFF_GPDAT);
-	if (value)
-		dat |= 1 << offset;
-	else
-		dat &= ~(1 << offset);
-
-	__raw_writel(dat, base + OFF_GPDAT);
-	__raw_writel(con, regcon);
-	__raw_writel(dat, base + OFF_GPDAT);
-
-	gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
-
-	return 0;
-}
-
 static struct s3c_gpio_cfg gpio_4bit_cfg_noint = {
 	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
 	.set_pull	= s3c_gpio_setpull_updown,
@@ -399,20 +255,6 @@ static struct s3c_gpio_chip gpio_2bit[] = {
 	},
 };
 
-static __init void s3c64xx_gpiolib_add_4bit(struct s3c_gpio_chip *chip)
-{
-	chip->chip.direction_input = s3c64xx_gpiolib_4bit_input;
-	chip->chip.direction_output = s3c64xx_gpiolib_4bit_output;
-	chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
-}
-
-static __init void s3c64xx_gpiolib_add_4bit2(struct s3c_gpio_chip *chip)
-{
-	chip->chip.direction_input = s3c64xx_gpiolib_4bit2_input;
-	chip->chip.direction_output = s3c64xx_gpiolib_4bit2_output;
-	chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
-}
-
 static __init void s3c64xx_gpiolib_add_2bit(struct s3c_gpio_chip *chip)
 {
 	chip->pm = __gpio_pm(&s3c_gpio_pm_2bit);
@@ -432,10 +274,10 @@ static __init void s3c64xx_gpiolib_add(struct s3c_gpio_chip *chips,
 static __init int s3c64xx_gpiolib_init(void)
 {
 	s3c64xx_gpiolib_add(gpio_4bit, ARRAY_SIZE(gpio_4bit),
-			    s3c64xx_gpiolib_add_4bit);
+			    samsung_gpiolib_add_4bit);
 
 	s3c64xx_gpiolib_add(gpio_4bit2, ARRAY_SIZE(gpio_4bit2),
-			    s3c64xx_gpiolib_add_4bit2);
+			    samsung_gpiolib_add_4bit2);
 
 	s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit),
 			    s3c64xx_gpiolib_add_2bit);
diff --git a/arch/arm/mach-s3c6400/include/mach/debug-macro.S b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
index 5c88875d6a3f..f9ab5d26052a 100644
--- a/arch/arm/mach-s3c6400/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
@@ -21,7 +21,7 @@
 	 * aligned and add in the offset when we load the value here.
 	 */
 
-	.macro addruart, rx, tmp
+	.macro addruart, rx, rtmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1
 		ldreq	\rx, = S3C_PA_UART
diff --git a/arch/arm/plat-s3c64xx/include/plat/dma-plat.h b/arch/arm/mach-s3c64xx/include/mach/dma.h
index 8f76a1e474d6..0a5d9268a23e 100644
--- a/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
+++ b/arch/arm/mach-s3c64xx/include/mach/dma.h
@@ -1,16 +1,71 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
+/* linux/arch/arm/mach-s3c6400/include/mach/dma.h
  *
- * Copyright 2009 Openmoko, Inc.
- * Copyright 2009 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
  *
- * S3C64XX DMA core
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
+ * S3C6400 - DMA support
+ */
+
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H __FILE__
+
+#define S3C_DMA_CHANNELS	(16)
+
+/* see mach-s3c2410/dma.h for notes on dma channel numbers */
+
+/* Note, for the S3C64XX architecture we keep the DMACH_
+ * defines in the order they are allocated to [S]DMA0/[S]DMA1
+ * so that is easy to do DHACH_ -> DMA controller conversion
+ */
+enum dma_ch {
+	/* DMA0/SDMA0 */
+	DMACH_UART0 = 0,
+	DMACH_UART0_SRC2,
+	DMACH_UART1,
+	DMACH_UART1_SRC2,
+	DMACH_UART2,
+	DMACH_UART2_SRC2,
+	DMACH_UART3,
+	DMACH_UART3_SRC2,
+	DMACH_PCM0_TX,
+	DMACH_PCM0_RX,
+	DMACH_I2S0_OUT,
+	DMACH_I2S0_IN,
+	DMACH_SPI0_TX,
+	DMACH_SPI0_RX,
+	DMACH_HSI_I2SV40_TX,
+	DMACH_HSI_I2SV40_RX,
+
+	/* DMA1/SDMA1 */
+	DMACH_PCM1_TX = 16,
+	DMACH_PCM1_RX,
+	DMACH_I2S1_OUT,
+	DMACH_I2S1_IN,
+	DMACH_SPI1_TX,
+	DMACH_SPI1_RX,
+	DMACH_AC97_PCMOUT,
+	DMACH_AC97_PCMIN,
+	DMACH_AC97_MICIN,
+	DMACH_PWM,
+	DMACH_IRDA,
+	DMACH_EXTERNAL,
+	DMACH_RES1,
+	DMACH_RES2,
+	DMACH_SECURITY_RX,	/* SDMA1 only */
+	DMACH_SECURITY_TX,	/* SDMA1 only */
+	DMACH_MAX		/* the end */
+};
+
+static __inline__ bool s3c_dma_has_circular(void)
+{
+	return true;
+}
+
+#define S3C2410_DMAF_CIRCULAR		(1 << 0)
+
+#include <plat/dma.h>
 
 #define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */
 
@@ -68,3 +123,5 @@ struct s3c2410_dma_chan {
 };
 
 #include <plat/dma-core.h>
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/entry-macro.S b/arch/arm/mach-s3c64xx/include/mach/entry-macro.S
new file mode 100644
index 000000000000..dd362604dcce
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/entry-macro.S
@@ -0,0 +1,18 @@
+/* arch/arm/mach-s3c6400/include/mach/entry-macro.S
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Low-level IRQ helper macros for the Samsung S3C64XX series
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+#include <mach/map.h>
+#include <mach/irqs.h>
+
+#include <asm/entry-macro-vic2.S>
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-a.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h
index 9aa0e427d113..34212e1a7e81 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-a.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-a.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-b.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h
index 3933adb4d50a..7232c037e642 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-b.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-b.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h
index e22b49f4f982..db189ab1639a 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h
index 6fe4a49c26f0..1a01cee7aca3 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-e.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h
index 7fcf3d8e0a48..f057adb627dd 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-e.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-e.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-f.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h
index f3faff974a18..62ab8f5e7835 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-f.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-f.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-g.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h
index 35bbd2378e55..b94954af1598 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-g.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-g.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h
index 2ba1767512d7..5d75aaad865e 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-i.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h
index ce9ebe335566..4ceaa6098bc7 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-i.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-i.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-j.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h
index 21a906299d30..6f25cd079a40 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-j.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-j.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-n.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h
index 569e76120881..d0aeda1cd9de 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-n.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-n.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-o.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h
index b09e12954b57..21868fa102d0 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-o.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-o.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-p.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h
index 92f00517926b..46bcfb63b8de 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-p.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-p.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-q.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h
index 565e60aaee47..1712223487b0 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-q.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-q.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
diff --git a/arch/arm/mach-s3c6400/include/mach/gpio.h b/arch/arm/mach-s3c64xx/include/mach/gpio.h
index e8e35e8fe731..0d46e994048a 100644
--- a/arch/arm/mach-s3c6400/include/mach/gpio.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio.h
@@ -91,6 +91,10 @@ enum s3c_gpio_number {
 #define S3C_GPIO_END		S3C64XX_GPIO_END
 
 /* define the number of gpios we need to the one after the GPQ() range */
-#define ARCH_NR_GPIOS	(S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
+#define GPIO_BOARD_START (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
+
+#define BOARD_NR_GPIOS 16
+
+#define ARCH_NR_GPIOS	(GPIO_BOARD_START + BOARD_NR_GPIOS)
 
 #include <asm-generic/gpio.h>
diff --git a/arch/arm/mach-s3c6400/include/mach/hardware.h b/arch/arm/mach-s3c64xx/include/mach/hardware.h
index 862d033e57a4..862d033e57a4 100644
--- a/arch/arm/mach-s3c6400/include/mach/hardware.h
+++ b/arch/arm/mach-s3c64xx/include/mach/hardware.h
diff --git a/arch/arm/mach-s3c64xx/include/mach/io.h b/arch/arm/mach-s3c64xx/include/mach/io.h
new file mode 100644
index 000000000000..de5716dbbd65
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/io.h
@@ -0,0 +1,18 @@
+/* arch/arm/mach-s3c64xxinclude/mach/io.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben-linux@fluff.org>
+ *
+ * Default IO routines for S3C64XX based
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+/* No current ISA/PCI bus support. */
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
+
+#define IO_SPACE_LIMIT (0xFFFFFFFF)
+
+#endif
diff --git a/arch/arm/plat-s3c64xx/include/plat/irqs.h b/arch/arm/mach-s3c64xx/include/mach/irqs.h
index 7956fd3bb194..e9ab4ac0b9a8 100644
--- a/arch/arm/plat-s3c64xx/include/plat/irqs.h
+++ b/arch/arm/mach-s3c64xx/include/mach/irqs.h
@@ -1,15 +1,15 @@
-/* linux/arch/arm/plat-s3c64xx/include/mach/irqs.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/irqs.h
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
  *      Ben Dooks <ben@simtec.co.uk>
  *      http://armlinux.simtec.co.uk/
  *
- * S3C64XX - Common IRQ support
+ * S3C64XX - IRQ support
  */
 
-#ifndef __ASM_PLAT_S3C64XX_IRQS_H
-#define __ASM_PLAT_S3C64XX_IRQS_H __FILE__
+#ifndef __ASM_MACH_S3C64XX_IRQS_H
+#define __ASM_MACH_S3C64XX_IRQS_H __FILE__
 
 /* we keep the first set of CPU IRQs out of the range of
  * the ISA space, so that the PC104 has them to itself
@@ -24,8 +24,8 @@
 
 #define S3C_IRQ(x)	((x) + S3C_IRQ_OFFSET)
 
-#define S3C_VIC0_BASE	S3C_IRQ(0)
-#define S3C_VIC1_BASE	S3C_IRQ(32)
+#define IRQ_VIC0_BASE	S3C_IRQ(0)
+#define IRQ_VIC1_BASE	S3C_IRQ(32)
 
 /* UART interrupts, each UART has 4 intterupts per channel so
  * use the space between the ISA and S3C main interrupts. Note, these
@@ -59,8 +59,8 @@
 
 /* VIC based IRQs */
 
-#define S3C64XX_IRQ_VIC0(x)	(S3C_VIC0_BASE + (x))
-#define S3C64XX_IRQ_VIC1(x)	(S3C_VIC1_BASE + (x))
+#define S3C64XX_IRQ_VIC0(x)	(IRQ_VIC0_BASE + (x))
+#define S3C64XX_IRQ_VIC1(x)	(IRQ_VIC1_BASE + (x))
 
 /* VIC0 */
 
@@ -198,7 +198,13 @@
  * interrupt controllers). */
 #define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1)
 
+#ifdef CONFIG_SMDK6410_WM1190_EV1
+#define IRQ_BOARD_NR 64
+#elif defined(CONFIG_SMDK6410_WM1192_EV1)
+#define IRQ_BOARD_NR 64
+#else
 #define IRQ_BOARD_NR 16
+#endif
 
 #define IRQ_BOARD_END (IRQ_BOARD_START + IRQ_BOARD_NR)
 
@@ -206,5 +212,5 @@
 
 #define NR_IRQS	(IRQ_BOARD_END + 1)
 
-#endif /* __ASM_PLAT_S3C64XX_IRQS_H */
+#endif /* __ASM_MACH_S3C64XX_IRQS_H */
 
diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c64xx/include/mach/map.h
index 106ee13581e2..801c1c0f3a95 100644
--- a/arch/arm/mach-s3c6400/include/mach/map.h
+++ b/arch/arm/mach-s3c64xx/include/mach/map.h
@@ -17,6 +17,18 @@
 
 #include <plat/map-base.h>
 
+/*
+ * Post-mux Chip Select Regions Xm0CSn_
+ * These may be used by SROM, NAND or CF depending on settings
+ */
+
+#define S3C64XX_PA_XM0CSN0 (0x10000000)
+#define S3C64XX_PA_XM0CSN1 (0x18000000)
+#define S3C64XX_PA_XM0CSN2 (0x20000000)
+#define S3C64XX_PA_XM0CSN3 (0x28000000)
+#define S3C64XX_PA_XM0CSN4 (0x30000000)
+#define S3C64XX_PA_XM0CSN5 (0x38000000)
+
 /* HSMMC units */
 #define S3C64XX_PA_HSMMC(x)	(0x7C200000 + ((x) * 0x100000))
 #define S3C64XX_PA_HSMMC0	S3C64XX_PA_HSMMC(0)
@@ -38,16 +50,22 @@
 #define S3C_VA_UART2		S3C_VA_UARTx(2)
 #define S3C_VA_UART3		S3C_VA_UARTx(3)
 
+#define S3C64XX_PA_SROM		(0x70000000)
+
 #define S3C64XX_PA_NAND		(0x70200000)
 #define S3C64XX_PA_FB		(0x77100000)
 #define S3C64XX_PA_USB_HSOTG	(0x7C000000)
 #define S3C64XX_PA_WATCHDOG	(0x7E004000)
+#define S3C64XX_PA_RTC		(0x7E005000)
+#define S3C64XX_PA_ADC		(0x7E00B000)
 #define S3C64XX_PA_SYSCON	(0x7E00F000)
 #define S3C64XX_PA_AC97		(0x7F001000)
 #define S3C64XX_PA_IIS0		(0x7F002000)
 #define S3C64XX_PA_IIS1		(0x7F003000)
 #define S3C64XX_PA_TIMER	(0x7F006000)
 #define S3C64XX_PA_IIC0		(0x7F004000)
+#define S3C64XX_PA_SPI0		(0x7F00B000)
+#define S3C64XX_PA_SPI1		(0x7F00C000)
 #define S3C64XX_PA_PCM0		(0x7F009000)
 #define S3C64XX_PA_PCM1		(0x7F00A000)
 #define S3C64XX_PA_IISV4	(0x7F00D000)
@@ -70,8 +88,8 @@
 #define S3C64XX_VA_USB_HSPHY	S3C_ADDR_CPU(0x00200000)
 
 /* place VICs close together */
-#define S3C_VA_VIC0		(S3C_VA_IRQ + 0x00)
-#define S3C_VA_VIC1		(S3C_VA_IRQ + 0x10000)
+#define VA_VIC0			(S3C_VA_IRQ + 0x00)
+#define VA_VIC1			(S3C_VA_IRQ + 0x10000)
 
 /* compatibiltiy defines. */
 #define S3C_PA_TIMER		S3C64XX_PA_TIMER
diff --git a/arch/arm/mach-s3c6400/include/mach/memory.h b/arch/arm/mach-s3c64xx/include/mach/memory.h
index a3ac84a65480..a3ac84a65480 100644
--- a/arch/arm/mach-s3c6400/include/mach/memory.h
+++ b/arch/arm/mach-s3c64xx/include/mach/memory.h
diff --git a/arch/arm/plat-s3c64xx/include/plat/pll.h b/arch/arm/mach-s3c64xx/include/mach/pll.h
index 90bbd72fdc4e..90bbd72fdc4e 100644
--- a/arch/arm/plat-s3c64xx/include/plat/pll.h
+++ b/arch/arm/mach-s3c64xx/include/mach/pll.h
diff --git a/arch/arm/plat-s3c64xx/include/plat/pm-core.h b/arch/arm/mach-s3c64xx/include/mach/pm-core.h
index d347de3ba0dc..1e9f20f0bb7b 100644
--- a/arch/arm/plat-s3c64xx/include/plat/pm-core.h
+++ b/arch/arm/mach-s3c64xx/include/mach/pm-core.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/pm-core.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/pm-core.h
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
@@ -12,7 +12,7 @@
  * published by the Free Software Foundation.
  */
 
-#include <plat/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
 static inline void s3c_pm_debug_init_uart(void)
 {
diff --git a/arch/arm/mach-s3c6400/include/mach/pwm-clock.h b/arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
index b25bedee0d52..b25bedee0d52 100644
--- a/arch/arm/mach-s3c6400/include/mach/pwm-clock.h
+++ b/arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
index ff46e7fa957a..3ef62741e5d1 100644
--- a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
@@ -35,14 +35,6 @@
 #define S3C_MEM0_GATE		S3C_CLKREG(0x3C)
 
 /* CLKDIV0 */
-#define S3C6400_CLKDIV0_MFC_MASK	(0xf << 28)
-#define S3C6400_CLKDIV0_MFC_SHIFT	(28)
-#define S3C6400_CLKDIV0_JPEG_MASK	(0xf << 24)
-#define S3C6400_CLKDIV0_JPEG_SHIFT	(24)
-#define S3C6400_CLKDIV0_CAM_MASK	(0xf << 20)
-#define S3C6400_CLKDIV0_CAM_SHIFT	(20)
-#define S3C6400_CLKDIV0_SECURITY_MASK	(0x3 << 18)
-#define S3C6400_CLKDIV0_SECURITY_SHIFT	(18)
 #define S3C6400_CLKDIV0_PCLK_MASK	(0xf << 12)
 #define S3C6400_CLKDIV0_PCLK_SHIFT	(12)
 #define S3C6400_CLKDIV0_HCLK2_MASK	(0x7 << 9)
@@ -51,42 +43,11 @@
 #define S3C6400_CLKDIV0_HCLK_SHIFT	(8)
 #define S3C6400_CLKDIV0_MPLL_MASK	(0x1 << 4)
 #define S3C6400_CLKDIV0_MPLL_SHIFT	(4)
+
 #define S3C6400_CLKDIV0_ARM_MASK	(0x7 << 0)
 #define S3C6410_CLKDIV0_ARM_MASK	(0xf << 0)
 #define S3C6400_CLKDIV0_ARM_SHIFT	(0)
 
-/* CLKDIV1 */
-#define S3C6410_CLKDIV1_FIMC_MASK	(0xf << 24)
-#define S3C6410_CLKDIV1_FIMC_SHIFT	(24)
-#define S3C6400_CLKDIV1_UHOST_MASK	(0xf << 20)
-#define S3C6400_CLKDIV1_UHOST_SHIFT	(20)
-#define S3C6400_CLKDIV1_SCALER_MASK	(0xf << 16)
-#define S3C6400_CLKDIV1_SCALER_SHIFT	(16)
-#define S3C6400_CLKDIV1_LCD_MASK	(0xf << 12)
-#define S3C6400_CLKDIV1_LCD_SHIFT	(12)
-#define S3C6400_CLKDIV1_MMC2_MASK	(0xf << 8)
-#define S3C6400_CLKDIV1_MMC2_SHIFT	(8)
-#define S3C6400_CLKDIV1_MMC1_MASK	(0xf << 4)
-#define S3C6400_CLKDIV1_MMC1_SHIFT	(4)
-#define S3C6400_CLKDIV1_MMC0_MASK	(0xf << 0)
-#define S3C6400_CLKDIV1_MMC0_SHIFT	(0)
-
-/* CLKDIV2 */
-#define S3C6410_CLKDIV2_AUDIO2_MASK	(0xf << 24)
-#define S3C6410_CLKDIV2_AUDIO2_SHIFT	(24)
-#define S3C6400_CLKDIV2_IRDA_MASK	(0xf << 20)
-#define S3C6400_CLKDIV2_IRDA_SHIFT	(20)
-#define S3C6400_CLKDIV2_UART_MASK	(0xf << 16)
-#define S3C6400_CLKDIV2_UART_SHIFT	(16)
-#define S3C6400_CLKDIV2_AUDIO1_MASK	(0xf << 12)
-#define S3C6400_CLKDIV2_AUDIO1_SHIFT	(12)
-#define S3C6400_CLKDIV2_AUDIO0_MASK	(0xf << 8)
-#define S3C6400_CLKDIV2_AUDIO0_SHIFT	(8)
-#define S3C6400_CLKDIV2_SPI1_MASK	(0xf << 4)
-#define S3C6400_CLKDIV2_SPI1_SHIFT	(4)
-#define S3C6400_CLKDIV2_SPI0_MASK	(0xf << 0)
-#define S3C6400_CLKDIV2_SPI0_SHIFT	(0)
-
 /* HCLK GATE Registers */
 #define S3C_CLKCON_HCLK_3DSE	(1<<31)
 #define S3C_CLKCON_HCLK_UHOST	(1<<29)
@@ -192,34 +153,4 @@
 #define S3C6400_CLKSRC_EPLL_MOUT_SHIFT	(2)
 #define S3C6400_CLKSRC_MFC		(1 << 4)
 
-#define S3C6410_CLKSRC_TV27_MASK	(0x1 << 31)
-#define S3C6410_CLKSRC_TV27_SHIFT	(31)
-#define S3C6410_CLKSRC_DAC27_MASK	(0x1 << 30)
-#define S3C6410_CLKSRC_DAC27_SHIFT	(30)
-#define S3C6400_CLKSRC_SCALER_MASK	(0x3 << 28)
-#define S3C6400_CLKSRC_SCALER_SHIFT	(28)
-#define S3C6400_CLKSRC_LCD_MASK		(0x3 << 26)
-#define S3C6400_CLKSRC_LCD_SHIFT	(26)
-#define S3C6400_CLKSRC_IRDA_MASK	(0x3 << 24)
-#define S3C6400_CLKSRC_IRDA_SHIFT	(24)
-#define S3C6400_CLKSRC_MMC2_MASK	(0x3 << 22)
-#define S3C6400_CLKSRC_MMC2_SHIFT	(22)
-#define S3C6400_CLKSRC_MMC1_MASK	(0x3 << 20)
-#define S3C6400_CLKSRC_MMC1_SHIFT	(20)
-#define S3C6400_CLKSRC_MMC0_MASK	(0x3 << 18)
-#define S3C6400_CLKSRC_MMC0_SHIFT	(18)
-#define S3C6400_CLKSRC_SPI1_MASK	(0x3 << 16)
-#define S3C6400_CLKSRC_SPI1_SHIFT	(16)
-#define S3C6400_CLKSRC_SPI0_MASK	(0x3 << 14)
-#define S3C6400_CLKSRC_SPI0_SHIFT	(14)
-#define S3C6400_CLKSRC_UART_MASK	(0x1 << 13)
-#define S3C6400_CLKSRC_UART_SHIFT	(13)
-#define S3C6400_CLKSRC_AUDIO1_MASK	(0x7 << 10)
-#define S3C6400_CLKSRC_AUDIO1_SHIFT	(10)
-#define S3C6400_CLKSRC_AUDIO0_MASK	(0x7 << 7)
-#define S3C6400_CLKSRC_AUDIO0_SHIFT	(7)
-#define S3C6400_CLKSRC_UHOST_MASK	(0x3 << 5)
-#define S3C6400_CLKSRC_UHOST_SHIFT	(5)
-
-
 #endif /* _PLAT_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/regs-fb.h b/arch/arm/mach-s3c64xx/include/mach/regs-fb.h
index f56611526c63..f56611526c63 100644
--- a/arch/arm/mach-s3c6400/include/mach/regs-fb.h
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-fb.h
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-gpio-memport.h b/arch/arm/mach-s3c64xx/include/mach/regs-gpio-memport.h
index 82342f6fd27d..82342f6fd27d 100644
--- a/arch/arm/plat-s3c64xx/include/plat/regs-gpio-memport.h
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-gpio-memport.h
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-gpio.h b/arch/arm/mach-s3c64xx/include/mach/regs-gpio.h
index 81f7f6e6832e..81f7f6e6832e 100644
--- a/arch/arm/plat-s3c64xx/include/plat/regs-gpio.h
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-gpio.h
diff --git a/arch/arm/mach-s3c6400/include/mach/regs-irq.h b/arch/arm/mach-s3c64xx/include/mach/regs-irq.h
index bcce68a0bb75..bcce68a0bb75 100644
--- a/arch/arm/mach-s3c6400/include/mach/regs-irq.h
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-irq.h
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-modem.h b/arch/arm/mach-s3c64xx/include/mach/regs-modem.h
index 49f7759dedfa..49f7759dedfa 100644
--- a/arch/arm/plat-s3c64xx/include/plat/regs-modem.h
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-modem.h
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-srom.h b/arch/arm/mach-s3c64xx/include/mach/regs-srom.h
new file mode 100644
index 000000000000..756731b36297
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-srom.h
@@ -0,0 +1,59 @@
+/* arch/arm/plat-s3c64xx/include/plat/regs-srom.h
+ *
+ * Copyright 2009 Andy Green <andy@warmcat.com>
+ *
+ * S3C64XX SROM definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_REGS_SROM_H
+#define __PLAT_REGS_SROM_H __FILE__
+
+#define S3C64XX_SROMREG(x)	(S3C_VA_MEM + (x))
+
+#define S3C64XX_SROM_BW		S3C64XX_SROMREG(0)
+#define S3C64XX_SROM_BC0	S3C64XX_SROMREG(4)
+#define S3C64XX_SROM_BC1	S3C64XX_SROMREG(8)
+#define S3C64XX_SROM_BC2	S3C64XX_SROMREG(0xc)
+#define S3C64XX_SROM_BC3	S3C64XX_SROMREG(0x10)
+#define S3C64XX_SROM_BC4	S3C64XX_SROMREG(0x14)
+#define S3C64XX_SROM_BC5	S3C64XX_SROMREG(0x18)
+
+/*
+ * one register BW holds 5 x 4-bit packed settings for NCS0 - NCS4
+ */
+
+#define S3C64XX_SROM_BW__DATAWIDTH__SHIFT	0
+#define S3C64XX_SROM_BW__WAITENABLE__SHIFT	2
+#define S3C64XX_SROM_BW__BYTEENABLE__SHIFT	3
+#define S3C64XX_SROM_BW__CS_MASK 0xf
+
+#define S3C64XX_SROM_BW__NCS0__SHIFT	0
+#define S3C64XX_SROM_BW__NCS1__SHIFT	4
+#define S3C64XX_SROM_BW__NCS2__SHIFT	8
+#define S3C64XX_SROM_BW__NCS3__SHIFT	0xc
+#define S3C64XX_SROM_BW__NCS4__SHIFT	0x10
+
+/*
+ * applies to same to BCS0 - BCS4
+ */
+
+#define S3C64XX_SROM_BCX__PMC__SHIFT	0
+#define S3C64XX_SROM_BCX__PMC__MASK	3
+#define S3C64XX_SROM_BCX__TACP__SHIFT	4
+#define S3C64XX_SROM_BCX__TACP__MASK	0xf
+#define S3C64XX_SROM_BCX__TCAH__SHIFT	8
+#define S3C64XX_SROM_BCX__TCAH__MASK	0xf
+#define S3C64XX_SROM_BCX__TCOH__SHIFT	12
+#define S3C64XX_SROM_BCX__TCOH__MASK	0xf
+#define S3C64XX_SROM_BCX__TACC__SHIFT	16
+#define S3C64XX_SROM_BCX__TACC__MASK	0x1f
+#define S3C64XX_SROM_BCX__TCOS__SHIFT	24
+#define S3C64XX_SROM_BCX__TCOS__MASK	0xf
+#define S3C64XX_SROM_BCX__TACS__SHIFT	28
+#define S3C64XX_SROM_BCX__TACS__MASK	0xf
+
+#endif /* _PLAT_REGS_SROM_H */
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-sys.h b/arch/arm/mach-s3c64xx/include/mach/regs-sys.h
index 69b78d9f83b8..69b78d9f83b8 100644
--- a/arch/arm/plat-s3c64xx/include/plat/regs-sys.h
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-sys.h
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-syscon-power.h b/arch/arm/mach-s3c64xx/include/mach/regs-syscon-power.h
index 270d96ac9705..270d96ac9705 100644
--- a/arch/arm/plat-s3c64xx/include/plat/regs-syscon-power.h
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-syscon-power.h
diff --git a/arch/arm/plat-s3c64xx/include/plat/s3c6400.h b/arch/arm/mach-s3c64xx/include/mach/s3c6400.h
index 11f2e1e119b0..f86958d05352 100644
--- a/arch/arm/plat-s3c64xx/include/plat/s3c6400.h
+++ b/arch/arm/mach-s3c64xx/include/mach/s3c6400.h
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c64xx/include/plat/s3c6400.h
+/* arch/arm/mach-s3c64xx/include/macht/s3c6400.h
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
@@ -15,9 +15,10 @@
 /* Common init code for S3C6400 related SoCs */
 
 extern void s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s3c6400_register_clocks(unsigned armclk_divlimit);
 extern void s3c6400_setup_clocks(void);
 
+extern void s3c64xx_register_clocks(unsigned long xtal, unsigned armclk_limit);
+
 #ifdef CONFIG_CPU_S3C6400
 
 extern  int s3c6400_init(void);
@@ -33,4 +34,3 @@ extern void s3c6400_init_clocks(int xtal);
 #define s3c6400_map_io NULL
 #define s3c6400_init NULL
 #endif
-
diff --git a/arch/arm/plat-s3c64xx/include/plat/s3c6410.h b/arch/arm/mach-s3c64xx/include/mach/s3c6410.h
index 50dcdd6f6800..24f1141ffcb7 100644
--- a/arch/arm/plat-s3c64xx/include/plat/s3c6410.h
+++ b/arch/arm/mach-s3c64xx/include/mach/s3c6410.h
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c64xx/include/plat/s3c6410.h
+/* arch/arm/mach-s3c64xx/include/mach/s3c6410.h
  *
  * Copyright 2008 Openmoko,  Inc.
  * Copyright 2008 Simtec Electronics
diff --git a/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h b/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h
new file mode 100644
index 000000000000..9d0c43b4b687
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h
@@ -0,0 +1,18 @@
+/* linux/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h
+ *
+ * Copyright (C) 2009 Samsung Electronics Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __S3C64XX_PLAT_SPI_CLKS_H
+#define __S3C64XX_PLAT_SPI_CLKS_H __FILE__
+
+#define S3C64XX_SPI_SRCCLK_PCLK		0
+#define S3C64XX_SPI_SRCCLK_SPIBUS	1
+#define S3C64XX_SPI_SRCCLK_48M		2
+
+#endif /* __S3C64XX_PLAT_SPI_CLKS_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/system.h b/arch/arm/mach-s3c64xx/include/mach/system.h
index 2e58cb7a7147..2e58cb7a7147 100644
--- a/arch/arm/mach-s3c6400/include/mach/system.h
+++ b/arch/arm/mach-s3c64xx/include/mach/system.h
diff --git a/arch/arm/mach-s3c6400/include/mach/tick.h b/arch/arm/mach-s3c64xx/include/mach/tick.h
index d9c0dc7014ec..ebe18a9469b8 100644
--- a/arch/arm/mach-s3c6400/include/mach/tick.h
+++ b/arch/arm/mach-s3c64xx/include/mach/tick.h
@@ -20,7 +20,7 @@
  */
 static inline u32 s3c24xx_ostimer_pending(void)
 {
-	u32 pend = __raw_readl(S3C_VA_VIC0 + VIC_RAW_STATUS);
+	u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
 	return pend & 1 << (IRQ_TIMER4_VIC - S3C64XX_IRQ_VIC0(0));
 }
 
diff --git a/arch/arm/mach-s3c64xx/include/mach/timex.h b/arch/arm/mach-s3c64xx/include/mach/timex.h
new file mode 100644
index 000000000000..fb2e8cd40829
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/timex.h
@@ -0,0 +1,24 @@
+/* arch/arm/mach-s3c64xx/include/mach/timex.h
+ *
+ * Copyright (c) 2003-2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C6400 - time parameters
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
+ * a variable is useless. It seems as long as we make our timers an
+ * exact multiple of HZ, any value that makes a 1->1 correspondence
+ * for the time conversion functions to/from jiffies is acceptable.
+*/
+
+#define CLOCK_TICK_RATE 12000000
+
+#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/uncompress.h b/arch/arm/mach-s3c64xx/include/mach/uncompress.h
index c6a82a20bf2a..c6a82a20bf2a 100644
--- a/arch/arm/mach-s3c6400/include/mach/uncompress.h
+++ b/arch/arm/mach-s3c64xx/include/mach/uncompress.h
diff --git a/arch/arm/mach-s3c64xx/include/mach/vmalloc.h b/arch/arm/mach-s3c64xx/include/mach/vmalloc.h
new file mode 100644
index 000000000000..7411ef3711a6
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/vmalloc.h
@@ -0,0 +1,20 @@
+/* arch/arm/mach-s3c64xx/include/mach/vmalloc.h
+ *
+ * from arch/arm/mach-iop3xx/include/mach/vmalloc.h
+ *
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C6400 vmalloc definition
+*/
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END	  (0xE0000000)
+
+#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/plat-s3c64xx/irq-eint.c b/arch/arm/mach-s3c64xx/irq-eint.c
index ebdf183a0911..5682d6a7f4af 100644
--- a/arch/arm/plat-s3c64xx/irq-eint.c
+++ b/arch/arm/mach-s3c64xx/irq-eint.c
@@ -22,7 +22,7 @@
 #include <asm/hardware/vic.h>
 
 #include <plat/regs-irqtype.h>
-#include <plat/regs-gpio.h>
+#include <mach/regs-gpio.h>
 #include <plat/gpio-cfg.h>
 
 #include <mach/map.h>
diff --git a/arch/arm/plat-s3c64xx/irq-pm.c b/arch/arm/mach-s3c64xx/irq-pm.c
index ca523b5d4c17..da1bec64b9da 100644
--- a/arch/arm/plat-s3c64xx/irq-pm.c
+++ b/arch/arm/mach-s3c64xx/irq-pm.c
@@ -23,7 +23,7 @@
 
 #include <plat/regs-serial.h>
 #include <plat/regs-timer.h>
-#include <plat/regs-gpio.h>
+#include <mach/regs-gpio.h>
 #include <plat/cpu.h>
 #include <plat/pm.h>
 
diff --git a/arch/arm/mach-s3c64xx/irq.c b/arch/arm/mach-s3c64xx/irq.c
new file mode 100644
index 000000000000..67a145d440f3
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/irq.c
@@ -0,0 +1,69 @@
+/* arch/arm/plat-s3c64xx/irq.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - Interrupt handling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/serial_core.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/hardware/vic.h>
+
+#include <mach/map.h>
+#include <plat/irq-vic-timer.h>
+#include <plat/irq-uart.h>
+#include <plat/cpu.h>
+
+static struct s3c_uart_irq uart_irqs[] = {
+	[0] = {
+		.regs		= S3C_VA_UART0,
+		.base_irq	= IRQ_S3CUART_BASE0,
+		.parent_irq	= IRQ_UART0,
+	},
+	[1] = {
+		.regs		= S3C_VA_UART1,
+		.base_irq	= IRQ_S3CUART_BASE1,
+		.parent_irq	= IRQ_UART1,
+	},
+	[2] = {
+		.regs		= S3C_VA_UART2,
+		.base_irq	= IRQ_S3CUART_BASE2,
+		.parent_irq	= IRQ_UART2,
+	},
+	[3] = {
+		.regs		= S3C_VA_UART3,
+		.base_irq	= IRQ_S3CUART_BASE3,
+		.parent_irq	= IRQ_UART3,
+	},
+};
+
+
+void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
+{
+	printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
+
+	/* initialise the pair of VICs */
+	vic_init(VA_VIC0, IRQ_VIC0_BASE, vic0_valid, 0);
+	vic_init(VA_VIC1, IRQ_VIC1_BASE, vic1_valid, 0);
+
+	/* add the timer sub-irqs */
+
+	s3c_init_vic_timer_irq(IRQ_TIMER0_VIC, IRQ_TIMER0);
+	s3c_init_vic_timer_irq(IRQ_TIMER1_VIC, IRQ_TIMER1);
+	s3c_init_vic_timer_irq(IRQ_TIMER2_VIC, IRQ_TIMER2);
+	s3c_init_vic_timer_irq(IRQ_TIMER3_VIC, IRQ_TIMER3);
+	s3c_init_vic_timer_irq(IRQ_TIMER4_VIC, IRQ_TIMER4);
+
+	s3c_init_uart_irqs(uart_irqs, ARRAY_SIZE(uart_irqs));
+}
diff --git a/arch/arm/mach-s3c6410/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
index 661cca63de25..4a0bb243d14a 100644
--- a/arch/arm/mach-s3c6410/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c6410/mach-anw6410.c
+/* linux/arch/arm/mach-s3c64xx/mach-anw6410.c
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
@@ -45,12 +45,12 @@
 #include <plat/iic.h>
 #include <plat/fb.h>
 
-#include <plat/s3c6410.h>
+#include <mach/s3c6410.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
-#include <plat/regs-gpio.h>
-#include <plat/regs-modem.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-modem.h>
 
 /* DM9000 */
 #define ANW6410_PA_DM9000	(0x18000000)
diff --git a/arch/arm/mach-s3c6410/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index 7619456f2ae8..187441a78dd5 100644
--- a/arch/arm/mach-s3c6410/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -38,7 +38,7 @@
 #include <plat/fb.h>
 #include <plat/nand.h>
 
-#include <plat/s3c6410.h>
+#include <mach/s3c6410.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
@@ -233,7 +233,7 @@ static struct platform_device *hmt_devices[] __initdata = {
 	&s3c_device_i2c0,
 	&s3c_device_nand,
 	&s3c_device_fb,
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_timer[1],
 	&hmt_backlight_device,
 	&hmt_leds_device,
diff --git a/arch/arm/mach-s3c6410/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c
index 55e9bbfaf68b..bf65747ea68e 100644
--- a/arch/arm/mach-s3c6410/mach-ncp.c
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-s3c6410/mach-ncp.c
+ * linux/arch/arm/mach-s3c64xx/mach-ncp.c
  *
  * Copyright (C) 2008-2009 Samsung Electronics
  *
@@ -40,7 +40,7 @@
 #include <plat/iic.h>
 #include <plat/fb.h>
 
-#include <plat/s3c6410.h>
+#include <mach/s3c6410.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c6400/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
index ab19285389a7..f7b18983950c 100644
--- a/arch/arm/mach-s3c6400/mach-smdk6400.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c6400/mach-smdk6400.c
+/* linux/arch/arm/mach-s3c64xx/mach-smdk6400.c
  *
  * Copyright 2008 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -31,7 +31,7 @@
 
 #include <plat/regs-serial.h>
 
-#include <plat/s3c6400.h>
+#include <mach/s3c6400.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index 8969fe73b83f..2d5afd221d77 100644
--- a/arch/arm/mach-s3c6410/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c6410/mach-smdk6410.c
+/* linux/arch/arm/mach-s3c64xx/mach-smdk6410.c
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
@@ -21,6 +21,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/i2c.h>
+#include <linux/leds.h>
 #include <linux/fb.h>
 #include <linux/gpio.h>
 #include <linux/delay.h>
@@ -32,6 +33,11 @@
 #include <linux/mfd/wm8350/pmic.h>
 #endif
 
+#ifdef CONFIG_SMDK6410_WM1192_EV1
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/pdata.h>
+#endif
+
 #include <video/platform_lcd.h>
 
 #include <asm/mach/arch.h>
@@ -46,14 +52,15 @@
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
-#include <plat/regs-modem.h>
-#include <plat/regs-gpio.h>
-#include <plat/regs-sys.h>
+#include <mach/regs-modem.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-sys.h>
+#include <mach/regs-srom.h>
 #include <plat/iic.h>
 #include <plat/fb.h>
 #include <plat/gpio-cfg.h>
 
-#include <plat/s3c6410.h>
+#include <mach/s3c6410.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
@@ -154,10 +161,20 @@ static struct s3c_fb_platdata smdk6410_lcd_pdata __initdata = {
 	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
 };
 
+/*
+ * Configuring Ethernet on SMDK6410
+ *
+ * Both CS8900A and LAN9115 chips share one chip select mediated by CFG6.
+ * The constant address below corresponds to nCS1
+ *
+ *  1) Set CFGB2 p3 ON others off, no other CFGB selects "ethernet"
+ *  2) CFG6 needs to be switched to "LAN9115" side
+ */
+
 static struct resource smdk6410_smsc911x_resources[] = {
 	[0] = {
-		.start = 0x18000000,
-		.end   = 0x18000000 + SZ_64K - 1,
+		.start = S3C64XX_PA_XM0CSN1,
+		.end   = S3C64XX_PA_XM0CSN1 + SZ_64K - 1,
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
@@ -235,8 +252,9 @@ static struct platform_device *smdk6410_devices[] __initdata = {
 	&s3c_device_i2c0,
 	&s3c_device_i2c1,
 	&s3c_device_fb,
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_usb_hsotg,
+	&s3c64xx_device_iisv4,
 
 #ifdef CONFIG_REGULATOR
 	&smdk6410_b_pwr_5v,
@@ -246,77 +264,124 @@ static struct platform_device *smdk6410_devices[] __initdata = {
 	&smdk6410_smsc911x,
 };
 
-#ifdef CONFIG_SMDK6410_WM1190_EV1
-/* S3C64xx internal logic & PLL */
-static struct regulator_init_data wm8350_dcdc1_data = {
+#ifdef CONFIG_REGULATOR
+/* ARM core */
+static struct regulator_consumer_supply smdk6410_vddarm_consumers[] = {
+	{
+		.supply = "vddarm",
+	}
+};
+
+/* VDDARM, BUCK1 on J5 */
+static struct regulator_init_data smdk6410_vddarm = {
 	.constraints = {
-		.name = "PVDD_INT/PVDD_PLL",
-		.min_uV = 1200000,
+		.name = "PVDD_ARM",
+		.min_uV = 1000000,
+		.max_uV = 1300000,
+		.always_on = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(smdk6410_vddarm_consumers),
+	.consumer_supplies = smdk6410_vddarm_consumers,
+};
+
+/* VDD_INT, BUCK2 on J5 */
+static struct regulator_init_data smdk6410_vddint = {
+	.constraints = {
+		.name = "PVDD_INT",
+		.min_uV = 1000000,
 		.max_uV = 1200000,
 		.always_on = 1,
-		.apply_uV = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
 	},
 };
 
-/* Memory */
-static struct regulator_init_data wm8350_dcdc3_data = {
+/* VDD_HI, LDO3 on J5 */
+static struct regulator_init_data smdk6410_vddhi = {
 	.constraints = {
-		.name = "PVDD_MEM",
-		.min_uV = 1800000,
-		.max_uV = 1800000,
+		.name = "PVDD_HI",
 		.always_on = 1,
-		.state_mem = {
-			 .uV = 1800000,
-			 .mode = REGULATOR_MODE_NORMAL,
-			 .enabled = 1,
-		 },
-		.initial_state = PM_SUSPEND_MEM,
 	},
 };
 
-/* USB, EXT, PCM, ADC/DAC, USB, MMC */
-static struct regulator_consumer_supply wm8350_dcdc4_consumers[] = {
-	{
-		/* WM8580 */
-		.supply = "DVDD",
-		.dev_name = "0-001b",
+/* VDD_PLL, LDO2 on J5 */
+static struct regulator_init_data smdk6410_vddpll = {
+	.constraints = {
+		.name = "PVDD_PLL",
+		.always_on = 1,
 	},
 };
 
-static struct regulator_init_data wm8350_dcdc4_data = {
+/* VDD_UH_MMC, LDO5 on J5 */
+static struct regulator_init_data smdk6410_vdduh_mmc = {
 	.constraints = {
-		.name = "PVDD_HI/PVDD_EXT/PVDD_SYS/PVCCM2MTV",
-		.min_uV = 3000000,
-		.max_uV = 3000000,
+		.name = "PVDD_UH/PVDD_MMC",
 		.always_on = 1,
 	},
-	.num_consumer_supplies = ARRAY_SIZE(wm8350_dcdc4_consumers),
-	.consumer_supplies = wm8350_dcdc4_consumers,
 };
 
-/* ARM core */
-static struct regulator_consumer_supply dcdc6_consumers[] = {
-	{
-		.supply = "vddarm",
-	}
+/* VCCM3BT, LDO8 on J5 */
+static struct regulator_init_data smdk6410_vccmc3bt = {
+	.constraints = {
+		.name = "PVCCM3BT",
+		.always_on = 1,
+	},
 };
 
-static struct regulator_init_data wm8350_dcdc6_data = {
+/* VCCM2MTV, LDO11 on J5 */
+static struct regulator_init_data smdk6410_vccm2mtv = {
 	.constraints = {
-		.name = "PVDD_ARM",
-		.min_uV = 1000000,
-		.max_uV = 1300000,
+		.name = "PVCCM2MTV",
 		.always_on = 1,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
 	},
-	.num_consumer_supplies = ARRAY_SIZE(dcdc6_consumers),
-	.consumer_supplies = dcdc6_consumers,
 };
 
-/* Alive */
-static struct regulator_init_data wm8350_ldo1_data = {
+/* VDD_LCD, LDO12 on J5 */
+static struct regulator_init_data smdk6410_vddlcd = {
+	.constraints = {
+		.name = "PVDD_LCD",
+		.always_on = 1,
+	},
+};
+
+/* VDD_OTGI, LDO9 on J5 */
+static struct regulator_init_data smdk6410_vddotgi = {
+	.constraints = {
+		.name = "PVDD_OTGI",
+		.always_on = 1,
+	},
+};
+
+/* VDD_OTG, LDO14 on J5 */
+static struct regulator_init_data smdk6410_vddotg = {
+	.constraints = {
+		.name = "PVDD_OTG",
+		.always_on = 1,
+	},
+};
+
+/* VDD_ALIVE, LDO15 on J5 */
+static struct regulator_init_data smdk6410_vddalive = {
 	.constraints = {
 		.name = "PVDD_ALIVE",
+		.always_on = 1,
+	},
+};
+
+/* VDD_AUDIO, VLDO_AUDIO on J5 */
+static struct regulator_init_data smdk6410_vddaudio = {
+	.constraints = {
+		.name = "PVDD_AUDIO",
+		.always_on = 1,
+	},
+};
+#endif
+
+#ifdef CONFIG_SMDK6410_WM1190_EV1
+/* S3C64xx internal logic & PLL */
+static struct regulator_init_data wm8350_dcdc1_data = {
+	.constraints = {
+		.name = "PVDD_INT/PVDD_PLL",
 		.min_uV = 1200000,
 		.max_uV = 1200000,
 		.always_on = 1,
@@ -324,24 +389,40 @@ static struct regulator_init_data wm8350_ldo1_data = {
 	},
 };
 
-/* OTG */
-static struct regulator_init_data wm8350_ldo2_data = {
+/* Memory */
+static struct regulator_init_data wm8350_dcdc3_data = {
 	.constraints = {
-		.name = "PVDD_OTG",
-		.min_uV = 3300000,
-		.max_uV = 3300000,
+		.name = "PVDD_MEM",
+		.min_uV = 1800000,
+		.max_uV = 1800000,
 		.always_on = 1,
+		.state_mem = {
+			 .uV = 1800000,
+			 .mode = REGULATOR_MODE_NORMAL,
+			 .enabled = 1,
+		},
+		.initial_state = PM_SUSPEND_MEM,
 	},
 };
 
-/* LCD */
-static struct regulator_init_data wm8350_ldo3_data = {
+/* USB, EXT, PCM, ADC/DAC, USB, MMC */
+static struct regulator_consumer_supply wm8350_dcdc4_consumers[] = {
+	{
+		/* WM8580 */
+		.supply = "DVDD",
+		.dev_name = "0-001b",
+	},
+};
+
+static struct regulator_init_data wm8350_dcdc4_data = {
 	.constraints = {
-		.name = "PVDD_LCD",
+		.name = "PVDD_HI/PVDD_EXT/PVDD_SYS/PVCCM2MTV",
 		.min_uV = 3000000,
 		.max_uV = 3000000,
 		.always_on = 1,
 	},
+	.num_consumer_supplies = ARRAY_SIZE(wm8350_dcdc4_consumers),
+	.consumer_supplies = wm8350_dcdc4_consumers,
 };
 
 /* OTGi/1190-EV1 HPVDD & AVDD */
@@ -362,10 +443,10 @@ static struct {
 	{ WM8350_DCDC_1, &wm8350_dcdc1_data },
 	{ WM8350_DCDC_3, &wm8350_dcdc3_data },
 	{ WM8350_DCDC_4, &wm8350_dcdc4_data },
-	{ WM8350_DCDC_6, &wm8350_dcdc6_data },
-	{ WM8350_LDO_1, &wm8350_ldo1_data },
-	{ WM8350_LDO_2, &wm8350_ldo2_data },
-	{ WM8350_LDO_3, &wm8350_ldo3_data },
+	{ WM8350_DCDC_6, &smdk6410_vddarm },
+	{ WM8350_LDO_1, &smdk6410_vddalive },
+	{ WM8350_LDO_2, &smdk6410_vddotg },
+	{ WM8350_LDO_3, &smdk6410_vddlcd },
 	{ WM8350_LDO_4, &wm8350_ldo4_data },
 };
 
@@ -388,6 +469,107 @@ static int __init smdk6410_wm8350_init(struct wm8350 *wm8350)
 static struct wm8350_platform_data __initdata smdk6410_wm8350_pdata = {
 	.init = smdk6410_wm8350_init,
 	.irq_high = 1,
+	.irq_base = IRQ_BOARD_START,
+};
+#endif
+
+#ifdef CONFIG_SMDK6410_WM1192_EV1
+static struct gpio_led wm1192_pmic_leds[] = {
+	{
+		.name = "PMIC:red:power",
+		.gpio = GPIO_BOARD_START + 3,
+		.default_state = LEDS_GPIO_DEFSTATE_ON,
+	},
+};
+
+static struct gpio_led_platform_data wm1192_pmic_led = {
+	.num_leds = ARRAY_SIZE(wm1192_pmic_leds),
+	.leds = wm1192_pmic_leds,
+};
+
+static struct platform_device wm1192_pmic_led_dev = {
+	.name          = "leds-gpio",
+	.id            = -1,
+	.dev = {
+		.platform_data = &wm1192_pmic_led,
+	},
+};
+
+static int wm1192_pre_init(struct wm831x *wm831x)
+{
+	int ret;
+
+	/* Configure the IRQ line */
+	s3c_gpio_setpull(S3C64XX_GPN(12), S3C_GPIO_PULL_UP);
+
+	ret = platform_device_register(&wm1192_pmic_led_dev);
+	if (ret != 0)
+		dev_err(wm831x->dev, "Failed to add PMIC LED: %d\n", ret);
+
+	return 0;
+}
+
+static struct wm831x_backlight_pdata wm1192_backlight_pdata = {
+	.isink = 1,
+	.max_uA = 27554,
+};
+
+static struct regulator_init_data wm1192_dcdc3 = {
+	.constraints = {
+		.name = "PVDD_MEM/PVDD_GPS",
+		.always_on = 1,
+	},
+};
+
+static struct regulator_consumer_supply wm1192_ldo1_consumers[] = {
+	{ .supply = "DVDD", .dev_name = "0-001b", },   /* WM8580 */
+};
+
+static struct regulator_init_data wm1192_ldo1 = {
+	.constraints = {
+		.name = "PVDD_LCD/PVDD_EXT",
+		.always_on = 1,
+	},
+	.consumer_supplies = wm1192_ldo1_consumers,
+	.num_consumer_supplies = ARRAY_SIZE(wm1192_ldo1_consumers),
+};
+
+static struct wm831x_status_pdata wm1192_led7_pdata = {
+	.name = "LED7:green:",
+};
+
+static struct wm831x_status_pdata wm1192_led8_pdata = {
+	.name = "LED8:green:",
+};
+
+static struct wm831x_pdata smdk6410_wm1192_pdata = {
+	.pre_init = wm1192_pre_init,
+	.irq_base = IRQ_BOARD_START,
+
+	.backlight = &wm1192_backlight_pdata,
+	.dcdc = {
+		&smdk6410_vddarm,  /* DCDC1 */
+		&smdk6410_vddint,  /* DCDC2 */
+		&wm1192_dcdc3,
+	},
+	.gpio_base = GPIO_BOARD_START,
+	.ldo = {
+		 &wm1192_ldo1,        /* LDO1 */
+		 &smdk6410_vdduh_mmc, /* LDO2 */
+		 NULL,                /* LDO3 NC */
+		 &smdk6410_vddotgi,   /* LDO4 */
+		 &smdk6410_vddotg,    /* LDO5 */
+		 &smdk6410_vddhi,     /* LDO6 */
+		 &smdk6410_vddaudio,  /* LDO7 */
+		 &smdk6410_vccm2mtv,  /* LDO8 */
+		 &smdk6410_vddpll,    /* LDO9 */
+		 &smdk6410_vccmc3bt,  /* LDO10 */
+		 &smdk6410_vddalive,  /* LDO11 */
+	},
+	.status = {
+		&wm1192_led7_pdata,
+		&wm1192_led8_pdata,
+	},
 };
 #endif
 
@@ -395,6 +577,13 @@ static struct i2c_board_info i2c_devs0[] __initdata = {
 	{ I2C_BOARD_INFO("24c08", 0x50), },
 	{ I2C_BOARD_INFO("wm8580", 0x1b), },
 
+#ifdef CONFIG_SMDK6410_WM1192_EV1
+	{ I2C_BOARD_INFO("wm8312", 0x34),
+	  .platform_data = &smdk6410_wm1192_pdata,
+	  .irq = S3C_EINT(12),
+	},
+#endif
+
 #ifdef CONFIG_SMDK6410_WM1190_EV1
 	{ I2C_BOARD_INFO("wm8350", 0x1a),
 	  .platform_data = &smdk6410_wm8350_pdata,
@@ -430,10 +619,32 @@ static void __init smdk6410_map_io(void)
 
 static void __init smdk6410_machine_init(void)
 {
+	u32 cs1;
+
 	s3c_i2c0_set_platdata(NULL);
 	s3c_i2c1_set_platdata(NULL);
 	s3c_fb_set_platdata(&smdk6410_lcd_pdata);
 
+	/* configure nCS1 width to 16 bits */
+
+	cs1 = __raw_readl(S3C64XX_SROM_BW) &
+		    ~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
+	cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
+		(1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
+		(1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
+						   S3C64XX_SROM_BW__NCS1__SHIFT;
+	__raw_writel(cs1, S3C64XX_SROM_BW);
+
+	/* set timing for nCS1 suitable for ethernet chip */
+
+	__raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
+		     (6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
+		     (4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
+		     (1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
+		     (0xe << S3C64XX_SROM_BCX__TACC__SHIFT) |
+		     (4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
+		     (0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
+
 	gpio_request(S3C64XX_GPN(5), "LCD power");
 	gpio_request(S3C64XX_GPF(13), "LCD power");
 	gpio_request(S3C64XX_GPF(15), "LCD power");
diff --git a/arch/arm/plat-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c
index 47632fc7eb66..b8ac4597fad7 100644
--- a/arch/arm/plat-s3c64xx/pm.c
+++ b/arch/arm/mach-s3c64xx/pm.c
@@ -20,14 +20,14 @@
 #include <mach/map.h>
 
 #include <plat/pm.h>
-#include <plat/regs-sys.h>
-#include <plat/regs-gpio.h>
-#include <plat/regs-clock.h>
-#include <plat/regs-syscon-power.h>
-#include <plat/regs-gpio-memport.h>
+#include <mach/regs-sys.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-syscon-power.h>
+#include <mach/regs-gpio-memport.h>
 
 #ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
-#include <plat/gpio-bank-n.h>
+#include <mach/gpio-bank-n.h>
 
 void s3c_pm_debug_smdkled(u32 set, u32 clear)
 {
diff --git a/arch/arm/mach-s3c6400/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c
index d876ee503671..707e34e3afd1 100644
--- a/arch/arm/mach-s3c6400/s3c6400.c
+++ b/arch/arm/mach-s3c64xx/s3c6400.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c6410/cpu.c
+/* linux/arch/arm/mach-s3c64xx/cpu.c
  *
  * Copyright 2009 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -30,14 +30,14 @@
 
 #include <plat/cpu-freq.h>
 #include <plat/regs-serial.h>
-#include <plat/regs-clock.h>
+#include <mach/regs-clock.h>
 
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/clock.h>
 #include <plat/sdhci.h>
 #include <plat/iic-core.h>
-#include <plat/s3c6400.h>
+#include <mach/s3c6400.h>
 
 void __init s3c6400_map_io(void)
 {
@@ -55,10 +55,7 @@ void __init s3c6400_map_io(void)
 
 void __init s3c6400_init_clocks(int xtal)
 {
-	printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
-	s3c24xx_register_baseclocks(xtal);
-	s3c64xx_register_clocks();
-	s3c6400_register_clocks(S3C6400_CLKDIV0_ARM_MASK);
+	s3c64xx_register_clocks(xtal, S3C6400_CLKDIV0_ARM_MASK);
 	s3c6400_setup_clocks();
 }
 
diff --git a/arch/arm/mach-s3c6410/cpu.c b/arch/arm/mach-s3c64xx/s3c6410.c
index 522c08691952..59635d19466a 100644
--- a/arch/arm/mach-s3c6410/cpu.c
+++ b/arch/arm/mach-s3c64xx/s3c6410.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c6410/cpu.c
+/* linux/arch/arm/mach-s3c64xx/s3c6410.c
  *
  * Copyright 2008 Simtec Electronics
  * Copyright 2008 Simtec Electronics
@@ -31,30 +31,18 @@
 
 #include <plat/cpu-freq.h>
 #include <plat/regs-serial.h>
-#include <plat/regs-clock.h>
+#include <mach/regs-clock.h>
 
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/clock.h>
 #include <plat/sdhci.h>
 #include <plat/iic-core.h>
-#include <plat/s3c6400.h>
-#include <plat/s3c6410.h>
-
-/* Initial IO mappings */
-
-static struct map_desc s3c6410_iodesc[] __initdata = {
-};
-
-/* s3c6410_map_io
- *
- * register the standard cpu IO areas
-*/
+#include <mach/s3c6400.h>
+#include <mach/s3c6410.h>
 
 void __init s3c6410_map_io(void)
 {
-	iotable_init(s3c6410_iodesc, ARRAY_SIZE(s3c6410_iodesc));
-
 	/* initialise device information early */
 	s3c6410_default_sdhci0();
 	s3c6410_default_sdhci1();
@@ -70,9 +58,7 @@ void __init s3c6410_map_io(void)
 void __init s3c6410_init_clocks(int xtal)
 {
 	printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
-	s3c24xx_register_baseclocks(xtal);
-	s3c64xx_register_clocks();
-	s3c6400_register_clocks(S3C6410_CLKDIV0_ARM_MASK);
+	s3c64xx_register_clocks(xtal, S3C6410_CLKDIV0_ARM_MASK);
 	s3c6400_setup_clocks();
 }
 
diff --git a/arch/arm/plat-s3c64xx/setup-fb-24bpp.c b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c
index 8e28e448dd20..8e28e448dd20 100644
--- a/arch/arm/plat-s3c64xx/setup-fb-24bpp.c
+++ b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c
diff --git a/arch/arm/plat-s3c64xx/setup-i2c0.c b/arch/arm/mach-s3c64xx/setup-i2c0.c
index 364480763728..d1b11e6e77e8 100644
--- a/arch/arm/plat-s3c64xx/setup-i2c0.c
+++ b/arch/arm/mach-s3c64xx/setup-i2c0.c
@@ -18,8 +18,8 @@
 struct platform_device; /* don't need the contents */
 
 #include <mach/gpio.h>
+#include <mach/gpio-bank-b.h>
 #include <plat/iic.h>
-#include <plat/gpio-bank-b.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c0_cfg_gpio(struct platform_device *dev)
diff --git a/arch/arm/plat-s3c64xx/setup-i2c1.c b/arch/arm/mach-s3c64xx/setup-i2c1.c
index bbe229bd90ca..2dce57d8c6f8 100644
--- a/arch/arm/plat-s3c64xx/setup-i2c1.c
+++ b/arch/arm/mach-s3c64xx/setup-i2c1.c
@@ -18,8 +18,8 @@
 struct platform_device; /* don't need the contents */
 
 #include <mach/gpio.h>
+#include <mach/gpio-bank-b.h>
 #include <plat/iic.h>
-#include <plat/gpio-bank-b.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c1_cfg_gpio(struct platform_device *dev)
diff --git a/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c b/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c
index a58c0cc7ba5e..a58c0cc7ba5e 100644
--- a/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c
+++ b/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c
diff --git a/arch/arm/mach-s3c6400/setup-sdhci.c b/arch/arm/mach-s3c64xx/setup-sdhci.c
index 1039937403be..1a942037c4ef 100644
--- a/arch/arm/mach-s3c6400/setup-sdhci.c
+++ b/arch/arm/mach-s3c64xx/setup-sdhci.c
@@ -1,11 +1,11 @@
-/* linux/arch/arm/mach-s3c6410/setup-sdhci.c
+/* linux/arch/arm/mach-s3c64xx/setup-sdhci.c
  *
  * Copyright 2008 Simtec Electronics
  * Copyright 2008 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *	http://armlinux.simtec.co.uk/
  *
- * S3C6410 - Helper functions for settign up SDHCI device(s) (HSMMC)
+ * S3C6400/S3C6410 - Helper functions for settign up SDHCI device(s) (HSMMC)
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -26,7 +26,7 @@
 
 /* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
 
-char *s3c6400_hsmmc_clksrcs[4] = {
+char *s3c64xx_hsmmc_clksrcs[4] = {
 	[0] = "hsmmc",
 	[1] = "hsmmc",
 	[2] = "mmc_bus",
@@ -61,3 +61,12 @@ void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
 	writel(ctrl3, r + S3C_SDHCI_CONTROL3);
 }
 
+void s3c6410_setup_sdhci_cfg_card(struct platform_device *dev,
+				  void __iomem *r,
+				  struct mmc_ios *ios,
+				  struct mmc_card *card)
+{
+	writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
+
+	s3c6400_setup_sdhci_cfg_card(dev, r, ios, card);
+}
diff --git a/arch/arm/plat-s3c64xx/sleep.S b/arch/arm/mach-s3c64xx/sleep.S
index 8e71fe90a373..b2ef44317368 100644
--- a/arch/arm/plat-s3c64xx/sleep.S
+++ b/arch/arm/mach-s3c64xx/sleep.S
@@ -1,4 +1,4 @@
-/* linux/0arch/arm/plat-s3c64xx/sleep.S
+/* linux/arch/arm/plat-s3c64xx/sleep.S
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
@@ -19,8 +19,8 @@
 #undef S3C64XX_VA_GPIO
 #define S3C64XX_VA_GPIO (0x0)
 
-#include <plat/regs-gpio.h>
-#include <plat/gpio-bank-n.h>
+#include <mach/regs-gpio.h>
+#include <mach/gpio-bank-n.h>
 
 #define LL_UART (S3C_PA_UART + (0x400 * CONFIG_S3C_LOWLEVEL_UART_PORT))
 
diff --git a/arch/arm/mach-s5p6440/Kconfig b/arch/arm/mach-s5p6440/Kconfig
new file mode 100644
index 000000000000..4c29ff8b07de
--- /dev/null
+++ b/arch/arm/mach-s5p6440/Kconfig
@@ -0,0 +1,21 @@
+# arch/arm/mach-s5p6440/Kconfig
+#
+# Copyright (c) 2009 Samsung Electronics Co., Ltd.
+#		http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+if ARCH_S5P6440
+
+config CPU_S5P6440
+	bool
+	help
+	  Enable S5P6440 CPU support
+
+config MACH_SMDK6440
+	bool "SMDK6440"
+	select CPU_S5P6440
+	help
+	  Machine support for the Samsung SMDK6440
+
+endif
diff --git a/arch/arm/mach-s5p6440/Makefile b/arch/arm/mach-s5p6440/Makefile
new file mode 100644
index 000000000000..1ad894b1d3ab
--- /dev/null
+++ b/arch/arm/mach-s5p6440/Makefile
@@ -0,0 +1,19 @@
+# arch/arm/mach-s5p6440/Makefile
+#
+# Copyright (c) 2009 Samsung Electronics Co., Ltd.
+# 		http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:=
+obj-				:=
+
+# Core support for S5P6440 system
+
+obj-$(CONFIG_CPU_S5P6440)	+= cpu.o init.o clock.o gpio.o
+
+# machine support
+
+obj-$(CONFIG_MACH_SMDK6440)	+= mach-smdk6440.o
diff --git a/arch/arm/mach-s5p6440/Makefile.boot b/arch/arm/mach-s5p6440/Makefile.boot
new file mode 100644
index 000000000000..ff90aa13bd67
--- /dev/null
+++ b/arch/arm/mach-s5p6440/Makefile.boot
@@ -0,0 +1,2 @@
+   zreladdr-y	:= 0x20008000
+params_phys-y	:= 0x20000100
diff --git a/arch/arm/mach-s5p6440/clock.c b/arch/arm/mach-s5p6440/clock.c
new file mode 100644
index 000000000000..b2672e16e7aa
--- /dev/null
+++ b/arch/arm/mach-s5p6440/clock.c
@@ -0,0 +1,698 @@
+/* linux/arch/arm/mach-s5p6440/clock.c
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6440 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/cpu-freq.h>
+#include <mach/regs-clock.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/clock-clksrc.h>
+#include <plat/s5p-clock.h>
+#include <plat/pll.h>
+#include <plat/s5p6440.h>
+
+/* APLL Mux output clock */
+static struct clksrc_clk clk_mout_apll = {
+	.clk    = {
+		.name           = "mout_apll",
+		.id             = -1,
+	},
+	.sources        = &clk_src_apll,
+	.reg_src        = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 },
+};
+
+static int s5p6440_epll_enable(struct clk *clk, int enable)
+{
+	unsigned int ctrlbit = clk->ctrlbit;
+	unsigned int epll_con = __raw_readl(S5P_EPLL_CON) & ~ctrlbit;
+
+	if (enable)
+		__raw_writel(epll_con | ctrlbit, S5P_EPLL_CON);
+	else
+		__raw_writel(epll_con, S5P_EPLL_CON);
+
+	return 0;
+}
+
+static unsigned long s5p6440_epll_get_rate(struct clk *clk)
+{
+	return clk->rate;
+}
+
+static u32 epll_div[][5] = {
+	{ 36000000,	0,	48, 1, 4 },
+	{ 48000000,	0,	32, 1, 3 },
+	{ 60000000,	0,	40, 1, 3 },
+	{ 72000000,	0,	48, 1, 3 },
+	{ 84000000,	0,	28, 1, 2 },
+	{ 96000000,	0,	32, 1, 2 },
+	{ 32768000,	45264,	43, 1, 4 },
+	{ 45158000,	6903,	30, 1, 3 },
+	{ 49152000,	50332,	32, 1, 3 },
+	{ 67738000,	10398,	45, 1, 3 },
+	{ 73728000,	9961,	49, 1, 3 }
+};
+
+static int s5p6440_epll_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned int epll_con, epll_con_k;
+	unsigned int i;
+
+	if (clk->rate == rate)	/* Return if nothing changed */
+		return 0;
+
+	epll_con = __raw_readl(S5P_EPLL_CON);
+	epll_con_k = __raw_readl(S5P_EPLL_CON_K);
+
+	epll_con_k &= ~(PLL90XX_KDIV_MASK);
+	epll_con &= ~(PLL90XX_MDIV_MASK | PLL90XX_PDIV_MASK | PLL90XX_SDIV_MASK);
+
+	for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
+		 if (epll_div[i][0] == rate) {
+			epll_con_k |= (epll_div[i][1] << PLL90XX_KDIV_SHIFT);
+			epll_con |= (epll_div[i][2] << PLL90XX_MDIV_SHIFT) |
+				    (epll_div[i][3] << PLL90XX_PDIV_SHIFT) |
+				    (epll_div[i][4] << PLL90XX_SDIV_SHIFT);
+			break;
+		}
+	}
+
+	if (i == ARRAY_SIZE(epll_div)) {
+		printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__);
+		return -EINVAL;
+	}
+
+	__raw_writel(epll_con, S5P_EPLL_CON);
+	__raw_writel(epll_con_k, S5P_EPLL_CON_K);
+
+	clk->rate = rate;
+
+	return 0;
+}
+
+static struct clk_ops s5p6440_epll_ops = {
+	.get_rate = s5p6440_epll_get_rate,
+	.set_rate = s5p6440_epll_set_rate,
+};
+
+static struct clksrc_clk clk_mout_epll = {
+	.clk    = {
+		.name           = "mout_epll",
+		.id             = -1,
+	},
+	.sources        = &clk_src_epll,
+	.reg_src        = { .reg = S5P_CLK_SRC0, .shift = 2, .size = 1 },
+};
+
+static struct clksrc_clk clk_mout_mpll = {
+	.clk = {
+		.name           = "mout_mpll",
+		.id             = -1,
+	},
+	.sources        = &clk_src_mpll,
+	.reg_src        = { .reg = S5P_CLK_SRC0, .shift = 1, .size = 1 },
+};
+
+static struct clk clk_h_low = {
+	.name		= "hclk_low",
+	.id		= -1,
+	.rate		= 0,
+	.parent		= NULL,
+	.ctrlbit	= 0,
+	.ops		= &clk_ops_def_setrate,
+};
+
+static struct clk clk_p_low = {
+	.name		= "pclk_low",
+	.id		= -1,
+	.rate		= 0,
+	.parent		= NULL,
+	.ctrlbit	= 0,
+	.ops		= &clk_ops_def_setrate,
+};
+
+enum perf_level {
+	L0 = 532*1000,
+	L1 = 266*1000,
+	L2 = 133*1000,
+};
+
+static const u32 clock_table[][3] = {
+	/*{ARM_CLK, DIVarm, DIVhclk}*/
+	{L0 * 1000, (0 << ARM_DIV_RATIO_SHIFT), (3 << S5P_CLKDIV0_HCLK_SHIFT)},
+	{L1 * 1000, (1 << ARM_DIV_RATIO_SHIFT), (1 << S5P_CLKDIV0_HCLK_SHIFT)},
+	{L2 * 1000, (3 << ARM_DIV_RATIO_SHIFT), (0 << S5P_CLKDIV0_HCLK_SHIFT)},
+};
+
+static unsigned long s5p6440_armclk_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	u32 clkdiv;
+
+	/* divisor mask starts at bit0, so no need to shift */
+	clkdiv = __raw_readl(ARM_CLK_DIV) & ARM_DIV_MASK;
+
+	return rate / (clkdiv + 1);
+}
+
+static unsigned long s5p6440_armclk_round_rate(struct clk *clk,
+						unsigned long rate)
+{
+	u32 iter;
+
+	for (iter = 1 ; iter < ARRAY_SIZE(clock_table) ; iter++) {
+		if (rate > clock_table[iter][0])
+			return clock_table[iter-1][0];
+	}
+
+	return clock_table[ARRAY_SIZE(clock_table) - 1][0];
+}
+
+static int s5p6440_armclk_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 round_tmp;
+	u32 iter;
+	u32 clk_div0_tmp;
+	u32 cur_rate = clk->ops->get_rate(clk);
+	unsigned long flags;
+
+	round_tmp = clk->ops->round_rate(clk, rate);
+	if (round_tmp == cur_rate)
+		return 0;
+
+
+	for (iter = 0 ; iter < ARRAY_SIZE(clock_table) ; iter++) {
+		if (round_tmp == clock_table[iter][0])
+			break;
+	}
+
+	if (iter >= ARRAY_SIZE(clock_table))
+		iter = ARRAY_SIZE(clock_table) - 1;
+
+	local_irq_save(flags);
+	if (cur_rate > round_tmp) {
+		/* Frequency Down */
+		clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK);
+		clk_div0_tmp |= clock_table[iter][1];
+		__raw_writel(clk_div0_tmp, ARM_CLK_DIV);
+
+		clk_div0_tmp = __raw_readl(ARM_CLK_DIV) &
+				~(S5P_CLKDIV0_HCLK_MASK);
+		clk_div0_tmp |= clock_table[iter][2];
+		__raw_writel(clk_div0_tmp, ARM_CLK_DIV);
+
+
+	} else {
+		/* Frequency Up */
+		clk_div0_tmp = __raw_readl(ARM_CLK_DIV) &
+				~(S5P_CLKDIV0_HCLK_MASK);
+		clk_div0_tmp |= clock_table[iter][2];
+		__raw_writel(clk_div0_tmp, ARM_CLK_DIV);
+
+		clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK);
+		clk_div0_tmp |= clock_table[iter][1];
+		__raw_writel(clk_div0_tmp, ARM_CLK_DIV);
+		}
+	local_irq_restore(flags);
+
+	clk->rate = clock_table[iter][0];
+
+	return 0;
+}
+
+static struct clk_ops s5p6440_clkarm_ops = {
+	.get_rate	= s5p6440_armclk_get_rate,
+	.set_rate	= s5p6440_armclk_set_rate,
+	.round_rate	= s5p6440_armclk_round_rate,
+};
+
+static unsigned long s5p6440_clk_doutmpll_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+
+	if (__raw_readl(S5P_CLK_DIV0) & S5P_CLKDIV0_MPLL_MASK)
+		rate /= 2;
+
+	return rate;
+}
+
+static struct clk clk_dout_mpll = {
+	.name		= "dout_mpll",
+	.id		= -1,
+	.parent		= &clk_mout_mpll.clk,
+	.ops            = &(struct clk_ops) {
+		.get_rate	= s5p6440_clk_doutmpll_get_rate,
+	},
+};
+
+int s5p6440_clk48m_ctrl(struct clk *clk, int enable)
+{
+	unsigned long flags;
+	u32 val;
+
+	/* can't rely on clock lock, this register has other usages */
+	local_irq_save(flags);
+
+	val = __raw_readl(S5P_OTHERS);
+	if (enable)
+		val |= S5P_OTHERS_USB_SIG_MASK;
+	else
+		val &= ~S5P_OTHERS_USB_SIG_MASK;
+
+	__raw_writel(val, S5P_OTHERS);
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+static int s5p6440_pclk_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLK_GATE_PCLK, clk, enable);
+}
+
+static int s5p6440_hclk0_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLK_GATE_HCLK0, clk, enable);
+}
+
+static int s5p6440_hclk1_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLK_GATE_HCLK1, clk, enable);
+}
+
+static int s5p6440_sclk_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLK_GATE_SCLK0, clk, enable);
+}
+
+static int s5p6440_mem_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLK_GATE_MEM0, clk, enable);
+}
+
+/*
+ * The following clocks will be disabled during clock initialization. It is
+ * recommended to keep the following clocks disabled until the driver requests
+ * for enabling the clock.
+ */
+static struct clk init_clocks_disable[] = {
+	{
+		.name		= "nand",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5p6440_mem_ctrl,
+		.ctrlbit	= S5P_CLKCON_MEM0_HCLK_NFCON,
+	}, {
+		.name		= "adc",
+		.id		= -1,
+		.parent		= &clk_p_low,
+		.enable		= s5p6440_pclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_PCLK_TSADC,
+	}, {
+		.name		= "i2c",
+		.id		= -1,
+		.parent		= &clk_p_low,
+		.enable		= s5p6440_pclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_PCLK_IIC0,
+	}, {
+		.name		= "i2s_v40",
+		.id		= 0,
+		.parent		= &clk_p_low,
+		.enable		= s5p6440_pclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_PCLK_IIS2,
+	}, {
+		.name		= "spi",
+		.id		= 0,
+		.parent		= &clk_p_low,
+		.enable		= s5p6440_pclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_PCLK_SPI0,
+	}, {
+		.name		= "spi",
+		.id		= 1,
+		.parent		= &clk_p_low,
+		.enable		= s5p6440_pclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_PCLK_SPI1,
+	}, {
+		.name		= "sclk_spi_48",
+		.id		= 0,
+		.parent		= &clk_48m,
+		.enable		= s5p6440_sclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_SCLK0_SPI0_48,
+	}, {
+		.name		= "sclk_spi_48",
+		.id		= 1,
+		.parent		= &clk_48m,
+		.enable		= s5p6440_sclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_SCLK0_SPI1_48,
+	}, {
+		.name		= "mmc_48m",
+		.id		= 0,
+		.parent		= &clk_48m,
+		.enable		= s5p6440_sclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_SCLK0_MMC0_48,
+	}, {
+		.name		= "mmc_48m",
+		.id		= 1,
+		.parent		= &clk_48m,
+		.enable		= s5p6440_sclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_SCLK0_MMC1_48,
+	}, {
+		.name		= "mmc_48m",
+		.id		= 2,
+		.parent		= &clk_48m,
+		.enable		= s5p6440_sclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_SCLK0_MMC2_48,
+	}, {
+		.name    	= "otg",
+		.id	   	= -1,
+		.parent  	= &clk_h_low,
+		.enable  	= s5p6440_hclk0_ctrl,
+		.ctrlbit 	= S5P_CLKCON_HCLK0_USB
+	}, {
+		.name    	= "post",
+		.id	   	= -1,
+		.parent  	= &clk_h_low,
+		.enable  	= s5p6440_hclk0_ctrl,
+		.ctrlbit 	= S5P_CLKCON_HCLK0_POST0
+	}, {
+		.name		= "lcd",
+		.id		= -1,
+		.parent		= &clk_h_low,
+		.enable		= s5p6440_hclk1_ctrl,
+		.ctrlbit	= S5P_CLKCON_HCLK1_DISPCON,
+	}, {
+		.name		= "hsmmc",
+		.id		= 0,
+		.parent		= &clk_h_low,
+		.enable		= s5p6440_hclk0_ctrl,
+		.ctrlbit	= S5P_CLKCON_HCLK0_HSMMC0,
+	}, {
+		.name		= "hsmmc",
+		.id		= 1,
+		.parent		= &clk_h_low,
+		.enable		= s5p6440_hclk0_ctrl,
+		.ctrlbit	= S5P_CLKCON_HCLK0_HSMMC1,
+	}, {
+		.name		= "hsmmc",
+		.id		= 2,
+		.parent		= &clk_h_low,
+		.enable		= s5p6440_hclk0_ctrl,
+		.ctrlbit	= S5P_CLKCON_HCLK0_HSMMC2,
+	}, {
+		.name		= "rtc",
+		.id		= -1,
+		.parent		= &clk_p_low,
+		.enable		= s5p6440_pclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_PCLK_RTC,
+	}, {
+		.name		= "watchdog",
+		.id		= -1,
+		.parent		= &clk_p_low,
+		.enable		= s5p6440_pclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_PCLK_WDT,
+	}, {
+		.name		= "timers",
+		.id		= -1,
+		.parent		= &clk_p_low,
+		.enable		= s5p6440_pclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_PCLK_PWM,
+	}
+};
+
+/*
+ * The following clocks will be enabled during clock initialization.
+ */
+static struct clk init_clocks[] = {
+	{
+		.name		= "gpio",
+		.id		= -1,
+		.parent		= &clk_p_low,
+		.enable		= s5p6440_pclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_PCLK_GPIO,
+	}, {
+		.name		= "uart",
+		.id		= 0,
+		.parent		= &clk_p_low,
+		.enable		= s5p6440_pclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_PCLK_UART0,
+	}, {
+		.name		= "uart",
+		.id		= 1,
+		.parent		= &clk_p_low,
+		.enable		= s5p6440_pclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_PCLK_UART1,
+	}, {
+		.name		= "uart",
+		.id		= 2,
+		.parent		= &clk_p_low,
+		.enable		= s5p6440_pclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_PCLK_UART2,
+	}, {
+		.name		= "uart",
+		.id		= 3,
+		.parent		= &clk_p_low,
+		.enable		= s5p6440_pclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_PCLK_UART3,
+	}
+};
+
+static struct clk clk_iis_cd_v40 = {
+	.name		= "iis_cdclk_v40",
+	.id		= -1,
+};
+
+static struct clk clk_pcm_cd = {
+	.name		= "pcm_cdclk",
+	.id		= -1,
+};
+
+static struct clk *clkset_spi_mmc_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+	&clk_fin_epll,
+};
+
+static struct clksrc_sources clkset_spi_mmc = {
+	.sources	= clkset_spi_mmc_list,
+	.nr_sources	= ARRAY_SIZE(clkset_spi_mmc_list),
+};
+
+static struct clk *clkset_uart_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll
+};
+
+static struct clksrc_sources clkset_uart = {
+	.sources	= clkset_uart_list,
+	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
+};
+
+static struct clksrc_clk clksrcs[] = {
+	{
+		.clk	= {
+			.name		= "mmc_bus",
+			.id		= 0,
+			.ctrlbit        = S5P_CLKCON_SCLK0_MMC0,
+			.enable		= s5p6440_sclk_ctrl,
+		},
+		.sources = &clkset_spi_mmc,
+		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 18, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV1, .shift = 0, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "mmc_bus",
+			.id		= 1,
+			.ctrlbit        = S5P_CLKCON_SCLK0_MMC1,
+			.enable		= s5p6440_sclk_ctrl,
+		},
+		.sources = &clkset_spi_mmc,
+		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 20, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV1, .shift = 4, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "mmc_bus",
+			.id		= 2,
+			.ctrlbit        = S5P_CLKCON_SCLK0_MMC2,
+			.enable		= s5p6440_sclk_ctrl,
+		},
+		.sources = &clkset_spi_mmc,
+		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 22, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV1, .shift = 8, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "uclk1",
+			.id		= -1,
+			.ctrlbit        = S5P_CLKCON_SCLK0_UART,
+			.enable		= s5p6440_sclk_ctrl,
+		},
+		.sources = &clkset_uart,
+		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 13, .size = 1 },
+		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 16, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "spi_epll",
+			.id		= 0,
+			.ctrlbit        = S5P_CLKCON_SCLK0_SPI0,
+			.enable		= s5p6440_sclk_ctrl,
+		},
+		.sources = &clkset_spi_mmc,
+		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 14, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 0, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "spi_epll",
+			.id		= 1,
+			.ctrlbit        = S5P_CLKCON_SCLK0_SPI1,
+			.enable		= s5p6440_sclk_ctrl,
+		},
+		.sources = &clkset_spi_mmc,
+		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 16, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 4, .size = 4 },
+	}
+};
+
+/* Clock initialisation code */
+static struct clksrc_clk *init_parents[] = {
+	&clk_mout_apll,
+	&clk_mout_epll,
+	&clk_mout_mpll,
+};
+
+void __init_or_cpufreq s5p6440_setup_clocks(void)
+{
+	struct clk *xtal_clk;
+	unsigned long xtal;
+	unsigned long fclk;
+	unsigned long hclk;
+	unsigned long hclk_low;
+	unsigned long pclk;
+	unsigned long pclk_low;
+	unsigned long epll;
+	unsigned long apll;
+	unsigned long mpll;
+	unsigned int ptr;
+	u32 clkdiv0;
+	u32 clkdiv3;
+
+	/* Set S5P6440 functions for clk_fout_epll */
+	clk_fout_epll.enable = s5p6440_epll_enable;
+	clk_fout_epll.ops = &s5p6440_epll_ops;
+
+	/* Set S5P6440 functions for arm clock */
+	clk_arm.parent = &clk_mout_apll.clk;
+	clk_arm.ops = &s5p6440_clkarm_ops;
+	clk_48m.enable = s5p6440_clk48m_ctrl;
+
+	clkdiv0 = __raw_readl(S5P_CLK_DIV0);
+	clkdiv3 = __raw_readl(S5P_CLK_DIV3);
+
+	xtal_clk = clk_get(NULL, "ext_xtal");
+	BUG_ON(IS_ERR(xtal_clk));
+
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
+
+	epll = s5p_get_pll90xx(xtal, __raw_readl(S5P_EPLL_CON),
+				__raw_readl(S5P_EPLL_CON_K));
+	mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502);
+	apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4502);
+
+	printk(KERN_INFO "S5P6440: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz," \
+			" E=%ld.%ldMHz\n",
+			print_mhz(apll), print_mhz(mpll), print_mhz(epll));
+
+	fclk = apll / GET_DIV(clkdiv0, S5P_CLKDIV0_ARM);
+	hclk = fclk / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK);
+	pclk = hclk / GET_DIV(clkdiv0, S5P_CLKDIV0_PCLK);
+
+	if (__raw_readl(S5P_OTHERS) & S5P_OTHERS_HCLK_LOW_SEL_MPLL) {
+		/* Asynchronous mode */
+		hclk_low = mpll / GET_DIV(clkdiv3, S5P_CLKDIV3_HCLK_LOW);
+	} else {
+		/* Synchronous mode */
+		hclk_low = apll / GET_DIV(clkdiv3, S5P_CLKDIV3_HCLK_LOW);
+	}
+
+	pclk_low = hclk_low / GET_DIV(clkdiv3, S5P_CLKDIV3_PCLK_LOW);
+
+	printk(KERN_INFO "S5P6440: HCLK=%ld.%ldMHz, HCLK_LOW=%ld.%ldMHz," \
+			" PCLK=%ld.%ldMHz, PCLK_LOW=%ld.%ldMHz\n",
+			print_mhz(hclk), print_mhz(hclk_low),
+			print_mhz(pclk), print_mhz(pclk_low));
+
+	clk_fout_mpll.rate = mpll;
+	clk_fout_epll.rate = epll;
+	clk_fout_apll.rate = apll;
+
+	clk_f.rate = fclk;
+	clk_h.rate = hclk;
+	clk_p.rate = pclk;
+	clk_h_low.rate = hclk_low;
+	clk_p_low.rate = pclk_low;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
+		s3c_set_clksrc(init_parents[ptr], true);
+
+	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+		s3c_set_clksrc(&clksrcs[ptr], true);
+}
+
+static struct clk *clks[] __initdata = {
+	&clk_ext,
+	&clk_mout_epll.clk,
+	&clk_mout_mpll.clk,
+	&clk_dout_mpll,
+	&clk_iis_cd_v40,
+	&clk_pcm_cd,
+	&clk_p_low,
+	&clk_h_low,
+};
+
+void __init s5p6440_register_clocks(void)
+{
+	struct clk *clkp;
+	int ret;
+	int ptr;
+
+	ret = s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
+	if (ret > 0)
+		printk(KERN_ERR "Failed to register %u clocks\n", ret);
+
+	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+
+	clkp = init_clocks_disable;
+	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+		(clkp->enable)(clkp, 0);
+	}
+
+	s3c_pwmclk_init();
+}
diff --git a/arch/arm/mach-s5p6440/cpu.c b/arch/arm/mach-s5p6440/cpu.c
new file mode 100644
index 000000000000..1794131aeacb
--- /dev/null
+++ b/arch/arm/mach-s5p6440/cpu.c
@@ -0,0 +1,114 @@
+/* linux/arch/arm/mach-s5p6440/cpu.c
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/proc-fns.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <asm/irq.h>
+
+#include <plat/regs-serial.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/s5p6440.h>
+
+static void s5p6440_idle(void)
+{
+	unsigned long val;
+
+	if (!need_resched()) {
+		val = __raw_readl(S5P_PWR_CFG);
+		val &= ~(0x3<<5);
+		val |= (0x1<<5);
+		__raw_writel(val, S5P_PWR_CFG);
+
+		cpu_do_idle();
+	}
+	local_irq_enable();
+}
+
+/* s5p6440_map_io
+ *
+ * register the standard cpu IO areas
+*/
+
+void __init s5p6440_map_io(void)
+{
+	/* initialize any device information early */
+}
+
+void __init s5p6440_init_clocks(int xtal)
+{
+	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+
+	s3c24xx_register_baseclocks(xtal);
+	s5p_register_clocks(xtal);
+	s5p6440_register_clocks();
+	s5p6440_setup_clocks();
+}
+
+void __init s5p6440_init_irq(void)
+{
+	/* S5P6440 supports only 2 VIC */
+	u32 vic[2];
+
+	/*
+	 * VIC0 is missing IRQ_VIC0[3, 4, 8, 10, (12-22)]
+	 * VIC1 is missing IRQ VIC1[1, 3, 4, 10, 11, 12, 14, 15, 22]
+	 */
+	vic[0] = 0xff800ae7;
+	vic[1] = 0xffbf23e5;
+
+	s5p_init_irq(vic, ARRAY_SIZE(vic));
+}
+
+static struct sysdev_class s5p6440_sysclass = {
+	.name	= "s5p6440-core",
+};
+
+static struct sys_device s5p6440_sysdev = {
+	.cls	= &s5p6440_sysclass,
+};
+
+static int __init s5p6440_core_init(void)
+{
+	return sysdev_class_register(&s5p6440_sysclass);
+}
+
+core_initcall(s5p6440_core_init);
+
+int __init s5p6440_init(void)
+{
+	printk(KERN_INFO "S5P6440: Initializing architecture\n");
+
+	/* set idle function */
+	pm_idle = s5p6440_idle;
+
+	return sysdev_register(&s5p6440_sysdev);
+}
diff --git a/arch/arm/mach-s5p6440/gpio.c b/arch/arm/mach-s5p6440/gpio.c
new file mode 100644
index 000000000000..b0ea741177ad
--- /dev/null
+++ b/arch/arm/mach-s5p6440/gpio.c
@@ -0,0 +1,322 @@
+/* arch/arm/mach-s5p6440/gpio.c
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * 		http://www.samsung.com/
+ *
+ * S5P6440 - GPIOlib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <mach/map.h>
+#include <mach/gpio.h>
+#include <mach/regs-gpio.h>
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+
+/* GPIO bank summary:
+*
+* Bank	GPIOs	Style	SlpCon	ExtInt Group
+* A	6	4Bit	Yes	1
+* B	7	4Bit	Yes	1
+* C	8	4Bit	Yes	2
+* F	2	2Bit	Yes	4 [1]
+* G	7	4Bit	Yes	5
+* H	10	4Bit[2]	Yes	6
+* I	16	2Bit	Yes	None
+* J	12	2Bit	Yes	None
+* N	16	2Bit	No	IRQ_EINT
+* P	8	2Bit	Yes	8
+* R	15	4Bit[2]	Yes	8
+*
+* [1] BANKF pins 14,15 do not form part of the external interrupt sources
+* [2] BANK has two control registers, GPxCON0 and GPxCON1
+*/
+
+static int s5p6440_gpiolib_rbank_4bit2_input(struct gpio_chip *chip,
+					     unsigned int offset)
+{
+	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+	void __iomem *base = ourchip->base;
+	void __iomem *regcon = base;
+	unsigned long con;
+
+	switch (offset) {
+	case 6:
+		offset += 1;
+	case 0:
+	case 1:
+	case 2:
+	case 3:
+	case 4:
+	case 5:
+		regcon -= 4;
+		break;
+	default:
+		offset -= 7;
+		break;
+	}
+
+	con = __raw_readl(regcon);
+	con &= ~(0xf << con_4bit_shift(offset));
+	__raw_writel(con, regcon);
+
+	return 0;
+}
+
+static int s5p6440_gpiolib_rbank_4bit2_output(struct gpio_chip *chip,
+					      unsigned int offset, int value)
+{
+	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+	void __iomem *base = ourchip->base;
+	void __iomem *regcon = base;
+	unsigned long con;
+	unsigned long dat;
+	unsigned con_offset  = offset;
+
+	switch (con_offset) {
+	case 6:
+		con_offset += 1;
+	case 0:
+	case 1:
+	case 2:
+	case 3:
+	case 4:
+	case 5:
+		regcon -= 4;
+		break;
+	default:
+		con_offset -= 7;
+		break;
+	}
+
+	con = __raw_readl(regcon);
+	con &= ~(0xf << con_4bit_shift(con_offset));
+	con |= 0x1 << con_4bit_shift(con_offset);
+
+	dat = __raw_readl(base + GPIODAT_OFF);
+	if (value)
+		dat |= 1 << offset;
+	else
+		dat &= ~(1 << offset);
+
+	__raw_writel(con, regcon);
+	__raw_writel(dat, base + GPIODAT_OFF);
+
+	return 0;
+}
+
+int s5p6440_gpio_setcfg_4bit_rbank(struct s3c_gpio_chip *chip,
+				   unsigned int off, unsigned int cfg)
+{
+	void __iomem *reg = chip->base;
+	unsigned int shift;
+	u32 con;
+
+	switch (off) {
+	case 0:
+	case 1:
+	case 2:
+	case 3:
+	case 4:
+	case 5:
+		shift = (off & 7) * 4;
+		reg -= 4;
+		break;
+	case 6:
+		shift = ((off + 1) & 7) * 4;
+		reg -= 4;
+	default:
+		shift = ((off + 1) & 7) * 4;
+		break;
+	}
+
+	if (s3c_gpio_is_cfg_special(cfg)) {
+		cfg &= 0xf;
+		cfg <<= shift;
+	}
+
+	con = __raw_readl(reg);
+	con &= ~(0xf << shift);
+	con |= cfg;
+	__raw_writel(con, reg);
+
+	return 0;
+}
+
+static struct s3c_gpio_cfg s5p6440_gpio_cfgs[] = {
+	{
+		.cfg_eint	= 0,
+	}, {
+		.cfg_eint	= 7,
+	}, {
+		.cfg_eint	= 3,
+		.set_config	= s5p6440_gpio_setcfg_4bit_rbank,
+	}, {
+		.cfg_eint	= 0,
+		.set_config	= s3c_gpio_setcfg_s3c24xx,
+	}, {
+		.cfg_eint	= 2,
+		.set_config	= s3c_gpio_setcfg_s3c24xx,
+	}, {
+		.cfg_eint	= 3,
+		.set_config	= s3c_gpio_setcfg_s3c24xx,
+	},
+};
+
+static struct s3c_gpio_chip s5p6440_gpio_4bit[] = {
+	{
+		.base	= S5P6440_GPA_BASE,
+		.config	= &s5p6440_gpio_cfgs[1],
+		.chip	= {
+			.base	= S5P6440_GPA(0),
+			.ngpio	= S5P6440_GPIO_A_NR,
+			.label	= "GPA",
+		},
+	}, {
+		.base	= S5P6440_GPB_BASE,
+		.config	= &s5p6440_gpio_cfgs[1],
+		.chip	= {
+			.base	= S5P6440_GPB(0),
+			.ngpio	= S5P6440_GPIO_B_NR,
+			.label	= "GPB",
+		},
+	}, {
+		.base	= S5P6440_GPC_BASE,
+		.config	= &s5p6440_gpio_cfgs[1],
+		.chip	= {
+			.base	= S5P6440_GPC(0),
+			.ngpio	= S5P6440_GPIO_C_NR,
+			.label	= "GPC",
+		},
+	}, {
+		.base	= S5P6440_GPG_BASE,
+		.config	= &s5p6440_gpio_cfgs[1],
+		.chip	= {
+			.base	= S5P6440_GPG(0),
+			.ngpio	= S5P6440_GPIO_G_NR,
+			.label	= "GPG",
+		},
+	},
+};
+
+static struct s3c_gpio_chip s5p6440_gpio_4bit2[] = {
+	{
+		.base	= S5P6440_GPH_BASE + 0x4,
+		.config	= &s5p6440_gpio_cfgs[1],
+		.chip	= {
+			.base	= S5P6440_GPH(0),
+			.ngpio	= S5P6440_GPIO_H_NR,
+			.label	= "GPH",
+		},
+	},
+};
+
+static struct s3c_gpio_chip gpio_rbank_4bit2[] = {
+	{
+		.base	= S5P6440_GPR_BASE + 0x4,
+		.config	= &s5p6440_gpio_cfgs[2],
+		.chip	= {
+			.base	= S5P6440_GPR(0),
+			.ngpio	= S5P6440_GPIO_R_NR,
+			.label	= "GPR",
+		},
+	},
+};
+
+static struct s3c_gpio_chip s5p6440_gpio_2bit[] = {
+	{
+		.base	= S5P6440_GPF_BASE,
+		.config	= &s5p6440_gpio_cfgs[5],
+		.chip	= {
+			.base	= S5P6440_GPF(0),
+			.ngpio	= S5P6440_GPIO_F_NR,
+			.label	= "GPF",
+		},
+	}, {
+		.base	= S5P6440_GPI_BASE,
+		.config	= &s5p6440_gpio_cfgs[3],
+		.chip	= {
+			.base	= S5P6440_GPI(0),
+			.ngpio	= S5P6440_GPIO_I_NR,
+			.label	= "GPI",
+		},
+	}, {
+		.base	= S5P6440_GPJ_BASE,
+		.config	= &s5p6440_gpio_cfgs[3],
+		.chip	= {
+			.base	= S5P6440_GPJ(0),
+			.ngpio	= S5P6440_GPIO_J_NR,
+			.label	= "GPJ",
+		},
+	}, {
+		.base	= S5P6440_GPN_BASE,
+		.config	= &s5p6440_gpio_cfgs[4],
+		.chip	= {
+			.base	= S5P6440_GPN(0),
+			.ngpio	= S5P6440_GPIO_N_NR,
+			.label	= "GPN",
+		},
+	}, {
+		.base	= S5P6440_GPP_BASE,
+		.config	= &s5p6440_gpio_cfgs[5],
+		.chip	= {
+			.base	= S5P6440_GPP(0),
+			.ngpio	= S5P6440_GPIO_P_NR,
+			.label	= "GPP",
+		},
+	},
+};
+
+void __init s5p6440_gpiolib_set_cfg(struct s3c_gpio_cfg *chipcfg, int nr_chips)
+{
+	for (; nr_chips > 0; nr_chips--, chipcfg++) {
+		if (!chipcfg->set_config)
+			chipcfg->set_config	= s3c_gpio_setcfg_s3c64xx_4bit;
+		if (!chipcfg->set_pull)
+			chipcfg->set_pull	= s3c_gpio_setpull_updown;
+		if (!chipcfg->get_pull)
+			chipcfg->get_pull	= s3c_gpio_getpull_updown;
+	}
+}
+
+static void __init s5p6440_gpio_add_rbank_4bit2(struct s3c_gpio_chip *chip,
+						int nr_chips)
+{
+	for (; nr_chips > 0; nr_chips--, chip++) {
+		chip->chip.direction_input = s5p6440_gpiolib_rbank_4bit2_input;
+		chip->chip.direction_output =
+					s5p6440_gpiolib_rbank_4bit2_output;
+		s3c_gpiolib_add(chip);
+	}
+}
+
+static int __init s5p6440_gpiolib_init(void)
+{
+	struct s3c_gpio_chip *chips = s5p6440_gpio_2bit;
+	int nr_chips = ARRAY_SIZE(s5p6440_gpio_2bit);
+
+	s5p6440_gpiolib_set_cfg(s5p6440_gpio_cfgs,
+				ARRAY_SIZE(s5p6440_gpio_cfgs));
+
+	for (; nr_chips > 0; nr_chips--, chips++)
+		s3c_gpiolib_add(chips);
+
+	samsung_gpiolib_add_4bit_chips(s5p6440_gpio_4bit,
+				ARRAY_SIZE(s5p6440_gpio_4bit));
+
+	samsung_gpiolib_add_4bit2_chips(s5p6440_gpio_4bit2,
+				ARRAY_SIZE(s5p6440_gpio_4bit2));
+
+	s5p6440_gpio_add_rbank_4bit2(gpio_rbank_4bit2,
+				ARRAY_SIZE(gpio_rbank_4bit2));
+
+	return 0;
+}
+arch_initcall(s5p6440_gpiolib_init);
diff --git a/arch/arm/mach-s5p6440/include/mach/debug-macro.S b/arch/arm/mach-s5p6440/include/mach/debug-macro.S
new file mode 100644
index 000000000000..1347d7f99079
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/debug-macro.S
@@ -0,0 +1,37 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/debug-macro.S
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* pull in the relevant register and map files. */
+
+#include <mach/map.h>
+#include <plat/regs-serial.h>
+
+	/* note, for the boot process to work we have to keep the UART
+	 * virtual address aligned to an 1MiB boundary for the L1
+	 * mapping the head code makes. We keep the UART virtual address
+	 * aligned and add in the offset when we load the value here.
+	 */
+
+	.macro addruart, rx, rtmp
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1
+		ldreq	\rx, = S3C_PA_UART
+		ldrne	\rx, = S3C_VA_UART
+#if CONFIG_DEBUG_S3C_UART != 0
+		add	\rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
+#endif
+	.endm
+
+/* include the reset of the code which will do the work, we're only
+ * compiling for a single cpu processor type so the default of s3c2440
+ * will be fine with us.
+ */
+
+#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-s5p6440/include/mach/entry-macro.S b/arch/arm/mach-s5p6440/include/mach/entry-macro.S
new file mode 100644
index 000000000000..e65f1b967262
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/entry-macro.S
@@ -0,0 +1,16 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/entry-macro.S
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Low-level IRQ helper macros for the Samsung S5P6440
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/map.h>
+#include <plat/irqs.h>
+
+#include <asm/entry-macro-vic2.S>
diff --git a/arch/arm/mach-s5p6440/include/mach/gpio.h b/arch/arm/mach-s5p6440/include/mach/gpio.h
new file mode 100644
index 000000000000..21783834f2a2
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/gpio.h
@@ -0,0 +1,80 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/gpio.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6440 - GPIO lib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H __FILE__
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+#define gpio_to_irq	__gpio_to_irq
+
+/* GPIO bank sizes */
+#define S5P6440_GPIO_A_NR	(6)
+#define S5P6440_GPIO_B_NR	(7)
+#define S5P6440_GPIO_C_NR	(8)
+#define S5P6440_GPIO_F_NR	(2)
+#define S5P6440_GPIO_G_NR	(7)
+#define S5P6440_GPIO_H_NR	(10)
+#define S5P6440_GPIO_I_NR	(16)
+#define S5P6440_GPIO_J_NR	(12)
+#define S5P6440_GPIO_N_NR	(16)
+#define S5P6440_GPIO_P_NR	(8)
+#define S5P6440_GPIO_R_NR	(15)
+
+/* GPIO bank numbers */
+
+/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
+ * space for debugging purposes so that any accidental
+ * change from one gpio bank to another can be caught.
+*/
+#define S5P6440_GPIO_NEXT(__gpio) \
+	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
+
+enum s5p_gpio_number {
+	S5P6440_GPIO_A_START = 0,
+	S5P6440_GPIO_B_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_A),
+	S5P6440_GPIO_C_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_B),
+	S5P6440_GPIO_F_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_C),
+	S5P6440_GPIO_G_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_F),
+	S5P6440_GPIO_H_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_G),
+	S5P6440_GPIO_I_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_H),
+	S5P6440_GPIO_J_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_I),
+	S5P6440_GPIO_N_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_J),
+	S5P6440_GPIO_P_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_N),
+	S5P6440_GPIO_R_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_P),
+};
+
+/* S5P6440 GPIO number definitions. */
+#define S5P6440_GPA(_nr)	(S5P6440_GPIO_A_START + (_nr))
+#define S5P6440_GPB(_nr)	(S5P6440_GPIO_B_START + (_nr))
+#define S5P6440_GPC(_nr)	(S5P6440_GPIO_C_START + (_nr))
+#define S5P6440_GPF(_nr)	(S5P6440_GPIO_F_START + (_nr))
+#define S5P6440_GPG(_nr)	(S5P6440_GPIO_G_START + (_nr))
+#define S5P6440_GPH(_nr)	(S5P6440_GPIO_H_START + (_nr))
+#define S5P6440_GPI(_nr)	(S5P6440_GPIO_I_START + (_nr))
+#define S5P6440_GPJ(_nr)	(S5P6440_GPIO_J_START + (_nr))
+#define S5P6440_GPN(_nr)	(S5P6440_GPIO_N_START + (_nr))
+#define S5P6440_GPP(_nr)	(S5P6440_GPIO_P_START + (_nr))
+#define S5P6440_GPR(_nr)	(S5P6440_GPIO_R_START + (_nr))
+
+/* the end of the S5P6440 specific gpios */
+#define S5P6440_GPIO_END	(S5P6440_GPR(S5P6440_GPIO_R_NR) + 1)
+#define S3C_GPIO_END		S5P6440_GPIO_END
+
+/* define the number of gpios we need to the one after the GPR() range */
+#define ARCH_NR_GPIOS		(S5P6440_GPR(S5P6440_GPIO_R_NR) +	\
+				 CONFIG_SAMSUNG_GPIO_EXTRA + 1)
+
+#include <asm-generic/gpio.h>
+
+#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/hardware.h b/arch/arm/mach-s5p6440/include/mach/hardware.h
new file mode 100644
index 000000000000..be8b26e875db
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/hardware.h
@@ -0,0 +1,18 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/hardware.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6440 - Hardware support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H __FILE__
+
+/* currently nothing here, placeholder */
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/io.h b/arch/arm/mach-s5p6440/include/mach/io.h
new file mode 100644
index 000000000000..fa2d69cb1ad7
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/io.h
@@ -0,0 +1,18 @@
+/* arch/arm/mach-s5p6440/include/mach/io.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben-linux@fluff.org>
+ *
+ * Default IO routines for S3C64XX based
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+/* No current ISA/PCI bus support. */
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
+
+#define IO_SPACE_LIMIT (0xFFFFFFFF)
+
+#endif
diff --git a/arch/arm/mach-s5p6440/include/mach/irqs.h b/arch/arm/mach-s5p6440/include/mach/irqs.h
new file mode 100644
index 000000000000..a4b9b40d18f2
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/irqs.h
@@ -0,0 +1,111 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/irqs.h
+ *
+ * Copyright 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6440 - IRQ definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_S5P_IRQS_H
+#define __ASM_ARCH_S5P_IRQS_H __FILE__
+
+#include <plat/irqs.h>
+
+/* VIC0 */
+
+#define IRQ_EINT0_3		S5P_IRQ_VIC0(0)
+#define IRQ_EINT4_11		S5P_IRQ_VIC0(1)
+#define IRQ_RTC_TIC		S5P_IRQ_VIC0(2)
+#define IRQ_IIC1		S5P_IRQ_VIC0(5)
+#define IRQ_I2SV40		S5P_IRQ_VIC0(6)
+#define IRQ_GPS			S5P_IRQ_VIC0(7)
+#define IRQ_POST0		S5P_IRQ_VIC0(9)
+#define IRQ_2D			S5P_IRQ_VIC0(11)
+#define IRQ_TIMER0_VIC		S5P_IRQ_VIC0(23)
+#define IRQ_TIMER1_VIC		S5P_IRQ_VIC0(24)
+#define IRQ_TIMER2_VIC		S5P_IRQ_VIC0(25)
+#define IRQ_WDT			S5P_IRQ_VIC0(26)
+#define IRQ_TIMER3_VIC		S5P_IRQ_VIC0(27)
+#define IRQ_TIMER4_VIC		S5P_IRQ_VIC0(28)
+#define IRQ_DISPCON0		S5P_IRQ_VIC0(29)
+#define IRQ_DISPCON1		S5P_IRQ_VIC0(30)
+#define IRQ_DISPCON2		S5P_IRQ_VIC0(31)
+
+/* VIC1 */
+
+#define IRQ_EINT12_15		S5P_IRQ_VIC1(0)
+#define IRQ_PCM0		S5P_IRQ_VIC1(2)
+#define IRQ_UART0		S5P_IRQ_VIC1(5)
+#define IRQ_UART1		S5P_IRQ_VIC1(6)
+#define IRQ_UART2		S5P_IRQ_VIC1(7)
+#define IRQ_UART3		S5P_IRQ_VIC1(8)
+#define IRQ_DMA0		S5P_IRQ_VIC1(9)
+#define IRQ_NFC			S5P_IRQ_VIC1(13)
+#define IRQ_SPI0		S5P_IRQ_VIC1(16)
+#define IRQ_SPI1		S5P_IRQ_VIC1(17)
+#define IRQ_IIC			S5P_IRQ_VIC1(18)
+#define IRQ_DISPCON3		S5P_IRQ_VIC1(19)
+#define IRQ_FIMGVG		S5P_IRQ_VIC1(20)
+#define IRQ_EINT_GROUPS		S5P_IRQ_VIC1(21)
+#define IRQ_PMUIRQ		S5P_IRQ_VIC1(23)
+#define IRQ_HSMMC0		S5P_IRQ_VIC1(24)
+#define IRQ_HSMMC1		S5P_IRQ_VIC1(25)
+#define IRQ_HSMMC2		IRQ_SPI1	/* shared with SPI1 */
+#define IRQ_OTG			S5P_IRQ_VIC1(26)
+#define IRQ_DSI			S5P_IRQ_VIC1(27)
+#define IRQ_RTC_ALARM		S5P_IRQ_VIC1(28)
+#define IRQ_TSI			S5P_IRQ_VIC1(29)
+#define IRQ_PENDN		S5P_IRQ_VIC1(30)
+#define IRQ_TC			IRQ_PENDN
+#define IRQ_ADC			S5P_IRQ_VIC1(31)
+
+/*
+ * Since the IRQ_EINT(x) are a linear mapping on s5p6440 we just defined
+ * them as an IRQ_EINT(x) macro from S5P_IRQ_EINT_BASE which we place
+ * after the pair of VICs.
+ */
+
+#define S5P_IRQ_EINT_BASE	(S5P_IRQ_VIC1(31) + 6)
+
+#define S5P_EINT(x)		((x) + S5P_IRQ_EINT_BASE)
+#define IRQ_EINT(x)		S5P_EINT(x)
+
+/*
+ * Next the external interrupt groups. These are similar to the IRQ_EINT(x)
+ * that they are sourced from the GPIO pins but with a different scheme for
+ * priority and source indication.
+ *
+ * The IRQ_EINT(x) can be thought of as 'group 0' of the available GPIO
+ * interrupts, but for historical reasons they are kept apart from these
+ * next interrupts.
+ *
+ * Use IRQ_EINT_GROUP(group, offset) to get the number for use in the
+ * machine specific support files.
+ */
+
+/* Actually, #6 and #7 are missing in the EINT_GROUP1 */
+#define IRQ_EINT_GROUP1_NR	(15)
+#define IRQ_EINT_GROUP2_NR	(8)
+#define IRQ_EINT_GROUP5_NR	(7)
+#define IRQ_EINT_GROUP6_NR	(10)
+/* Actually, #0, #1 and #2 are missing in the EINT_GROUP8 */
+#define IRQ_EINT_GROUP8_NR	(11)
+
+#define IRQ_EINT_GROUP_BASE	S5P_EINT(16)
+#define IRQ_EINT_GROUP1_BASE	(IRQ_EINT_GROUP_BASE + 0)
+#define IRQ_EINT_GROUP2_BASE	(IRQ_EINT_GROUP1_BASE + IRQ_EINT_GROUP1_NR)
+#define IRQ_EINT_GROUP5_BASE	(IRQ_EINT_GROUP2_BASE + IRQ_EINT_GROUP2_NR)
+#define IRQ_EINT_GROUP6_BASE	(IRQ_EINT_GROUP5_BASE + IRQ_EINT_GROUP5_NR)
+#define IRQ_EINT_GROUP8_BASE	(IRQ_EINT_GROUP6_BASE + IRQ_EINT_GROUP6_NR)
+
+#define IRQ_EINT_GROUP(grp, x)	(IRQ_EINT_GROUP##grp##_BASE + (x))
+
+/* Set the default NR_IRQS */
+
+#define NR_IRQS			(IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR + 1)
+
+#endif /* __ASM_ARCH_S5P_IRQS_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/map.h b/arch/arm/mach-s5p6440/include/mach/map.h
new file mode 100644
index 000000000000..8924e5a4d6a6
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/map.h
@@ -0,0 +1,68 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/map.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6440 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H __FILE__
+
+#include <plat/map-base.h>
+#include <plat/map-s5p.h>
+
+#define S5P6440_PA_CHIPID	(0xE0000000)
+#define S5P_PA_CHIPID		S5P6440_PA_CHIPID
+
+#define S5P6440_PA_SYSCON	(0xE0100000)
+#define S5P6440_PA_CLK		(S5P6440_PA_SYSCON + 0x0)
+#define S5P_PA_SYSCON		S5P6440_PA_SYSCON
+
+#define S5P6440_PA_GPIO		(0xE0308000)
+#define S5P_PA_GPIO		S5P6440_PA_GPIO
+
+#define S5P6440_PA_VIC0		(0xE4000000)
+#define S5P_PA_VIC0		S5P6440_PA_VIC0
+
+#define S5P6440_PA_VIC1		(0xE4100000)
+#define S5P_PA_VIC1		S5P6440_PA_VIC1
+
+#define S5P6440_PA_TIMER	(0xEA000000)
+#define S5P_PA_TIMER		S5P6440_PA_TIMER
+
+#define S5P6440_PA_RTC		(0xEA100000)
+#define S5P_PA_RTC		S5P6440_PA_RTC
+
+#define S5P6440_PA_WDT		(0xEA200000)
+#define S5P_PA_WDT		S5P6440_PA_WDT
+
+#define S5P6440_PA_UART		(0xEC000000)
+
+#define S5P_PA_UART0		(S5P6440_PA_UART + 0x0)
+#define S5P_PA_UART1		(S5P6440_PA_UART + 0x400)
+#define S5P_PA_UART2		(S5P6440_PA_UART + 0x800)
+#define S5P_PA_UART3		(S5P6440_PA_UART + 0xC00)
+
+#define S5P_SZ_UART		SZ_256
+
+#define S5P6440_PA_IIC0		(0xEC104000)
+
+#define S5P6440_PA_HSOTG	(0xED100000)
+
+#define S5P6440_PA_HSMMC0	(0xED800000)
+#define S5P6440_PA_HSMMC1	(0xED900000)
+#define S5P6440_PA_HSMMC2	(0xEDA00000)
+
+#define S5P6440_PA_SDRAM	(0x20000000)
+#define S5P_PA_SDRAM		S5P6440_PA_SDRAM
+
+/* compatibiltiy defines. */
+#define S3C_PA_UART		S5P6440_PA_UART
+#define S3C_PA_IIC		S5P6440_PA_IIC0
+
+#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/memory.h b/arch/arm/mach-s5p6440/include/mach/memory.h
new file mode 100644
index 000000000000..d62910c71b56
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/memory.h
@@ -0,0 +1,19 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/memory.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6440 - Memory definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET     	UL(0x20000000)
+#define CONSISTENT_DMA_SIZE	SZ_8M
+
+#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/pwm-clock.h b/arch/arm/mach-s5p6440/include/mach/pwm-clock.h
new file mode 100644
index 000000000000..c4bb7c555477
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/pwm-clock.h
@@ -0,0 +1,62 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/pwm-clock.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * Copyright 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6440 - pwm clock and timer support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/**
+ * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
+ * @cfg: The timer TCFG1 register bits shifted down to 0.
+ *
+ * Return true if the given configuration from TCFG1 is a TCLK instead
+ * any of the TDIV clocks.
+ */
+static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
+{
+	return tcfg == S3C2410_TCFG1_MUX_TCLK;
+}
+
+/**
+ * tcfg_to_divisor() - convert tcfg1 setting to a divisor
+ * @tcfg1: The tcfg1 setting, shifted down.
+ *
+ * Get the divisor value for the given tcfg1 setting. We assume the
+ * caller has already checked to see if this is not a TCLK source.
+ */
+static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
+{
+	return 1 << (1 + tcfg1);
+}
+
+/**
+ * pwm_tdiv_has_div1() - does the tdiv setting have a /1
+ *
+ * Return true if we have a /1 in the tdiv setting.
+ */
+static inline unsigned int pwm_tdiv_has_div1(void)
+{
+	return 0;
+}
+
+/**
+ * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
+ * @div: The divisor to calculate the bit information for.
+ *
+ * Turn a divisor into the necessary bit field for TCFG1.
+ */
+static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
+{
+	return ilog2(div) - 1;
+}
+
+#define S3C_TCFG1_MUX_TCLK S3C2410_TCFG1_MUX_TCLK
diff --git a/arch/arm/mach-s5p6440/include/mach/regs-clock.h b/arch/arm/mach-s5p6440/include/mach/regs-clock.h
new file mode 100644
index 000000000000..c783ecc9f193
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/regs-clock.h
@@ -0,0 +1,130 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/regs-clock.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6440 - Clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_CLOCK_H
+#define __ASM_ARCH_REGS_CLOCK_H __FILE__
+
+#include <mach/map.h>
+
+#define S5P_CLKREG(x)		(S3C_VA_SYS + (x))
+
+#define S5P_APLL_LOCK		S5P_CLKREG(0x00)
+#define S5P_MPLL_LOCK		S5P_CLKREG(0x04)
+#define S5P_EPLL_LOCK		S5P_CLKREG(0x08)
+#define S5P_APLL_CON		S5P_CLKREG(0x0C)
+#define S5P_MPLL_CON		S5P_CLKREG(0x10)
+#define S5P_EPLL_CON		S5P_CLKREG(0x14)
+#define S5P_EPLL_CON_K		S5P_CLKREG(0x18)
+#define S5P_CLK_SRC0		S5P_CLKREG(0x1C)
+#define S5P_CLK_DIV0		S5P_CLKREG(0x20)
+#define S5P_CLK_DIV1		S5P_CLKREG(0x24)
+#define S5P_CLK_DIV2		S5P_CLKREG(0x28)
+#define S5P_CLK_OUT		S5P_CLKREG(0x2C)
+#define S5P_CLK_GATE_HCLK0	S5P_CLKREG(0x30)
+#define S5P_CLK_GATE_PCLK	S5P_CLKREG(0x34)
+#define S5P_CLK_GATE_SCLK0	S5P_CLKREG(0x38)
+#define S5P_CLK_GATE_MEM0	S5P_CLKREG(0x3C)
+#define S5P_CLK_DIV3		S5P_CLKREG(0x40)
+#define S5P_CLK_GATE_HCLK1	S5P_CLKREG(0x44)
+#define S5P_CLK_GATE_SCLK1	S5P_CLKREG(0x48)
+#define S5P_AHB_CON0           	S5P_CLKREG(0x100)
+#define S5P_CLK_SRC1           	S5P_CLKREG(0x10C)
+#define S5P_SWRESET		S5P_CLKREG(0x114)
+#define S5P_SYS_ID		S5P_CLKREG(0x118)
+#define S5P_SYS_OTHERS		S5P_CLKREG(0x11C)
+#define S5P_MEM_CFG_STAT	S5P_CLKREG(0x12C)
+#define S5P_PWR_CFG		S5P_CLKREG(0x804)
+#define S5P_EINT_WAKEUP_MASK	S5P_CLKREG(0x808)
+#define S5P_NORMAL_CFG		S5P_CLKREG(0x810)
+#define S5P_STOP_CFG		S5P_CLKREG(0x814)
+#define S5P_SLEEP_CFG		S5P_CLKREG(0x818)
+#define S5P_OSC_FREQ		S5P_CLKREG(0x820)
+#define S5P_OSC_STABLE		S5P_CLKREG(0x824)
+#define S5P_PWR_STABLE		S5P_CLKREG(0x828)
+#define S5P_MTC_STABLE		S5P_CLKREG(0x830)
+#define S5P_OTHERS		S5P_CLKREG(0x900)
+#define S5P_RST_STAT		S5P_CLKREG(0x904)
+#define S5P_WAKEUP_STAT		S5P_CLKREG(0x908)
+#define S5P_SLPEN		S5P_CLKREG(0x930)
+#define S5P_INFORM0		S5P_CLKREG(0xA00)
+#define S5P_INFORM1		S5P_CLKREG(0xA04)
+#define S5P_INFORM2		S5P_CLKREG(0xA08)
+#define S5P_INFORM3		S5P_CLKREG(0xA0C)
+
+/* CLKDIV0 */
+#define S5P_CLKDIV0_PCLK_MASK		(0xf << 12)
+#define S5P_CLKDIV0_PCLK_SHIFT		(12)
+#define S5P_CLKDIV0_HCLK_MASK		(0xf << 8)
+#define S5P_CLKDIV0_HCLK_SHIFT		(8)
+#define S5P_CLKDIV0_MPLL_MASK		(0x1 << 4)
+#define S5P_CLKDIV0_ARM_MASK		(0xf << 0)
+#define S5P_CLKDIV0_ARM_SHIFT		(0)
+
+/* CLKDIV3 */
+#define S5P_CLKDIV3_PCLK_LOW_MASK	(0xf << 12)
+#define S5P_CLKDIV3_PCLK_LOW_SHIFT	(12)
+#define S5P_CLKDIV3_HCLK_LOW_MASK	(0xf << 8)
+#define S5P_CLKDIV3_HCLK_LOW_SHIFT	(8)
+
+/* HCLK0 GATE Registers */
+#define S5P_CLKCON_HCLK0_USB		(1<<20)
+#define S5P_CLKCON_HCLK0_HSMMC2		(1<<19)
+#define S5P_CLKCON_HCLK0_HSMMC1		(1<<18)
+#define S5P_CLKCON_HCLK0_HSMMC0		(1<<17)
+#define S5P_CLKCON_HCLK0_POST0		(1<<5)
+
+/* HCLK1 GATE Registers */
+#define S5P_CLKCON_HCLK1_DISPCON	(1<<1)
+
+/* PCLK GATE Registers */
+#define S5P_CLKCON_PCLK_IIS2		(1<<26)
+#define S5P_CLKCON_PCLK_SPI1		(1<<22)
+#define S5P_CLKCON_PCLK_SPI0		(1<<21)
+#define S5P_CLKCON_PCLK_GPIO		(1<<18)
+#define S5P_CLKCON_PCLK_IIC0		(1<<17)
+#define S5P_CLKCON_PCLK_TSADC		(1<<12)
+#define S5P_CLKCON_PCLK_PWM		(1<<7)
+#define S5P_CLKCON_PCLK_RTC		(1<<6)
+#define S5P_CLKCON_PCLK_WDT		(1<<5)
+#define S5P_CLKCON_PCLK_UART3		(1<<4)
+#define S5P_CLKCON_PCLK_UART2		(1<<3)
+#define S5P_CLKCON_PCLK_UART1		(1<<2)
+#define S5P_CLKCON_PCLK_UART0		(1<<1)
+
+/* SCLK0 GATE Registers */
+#define S5P_CLKCON_SCLK0_MMC2_48	(1<<29)
+#define S5P_CLKCON_SCLK0_MMC1_48	(1<<28)
+#define S5P_CLKCON_SCLK0_MMC0_48	(1<<27)
+#define S5P_CLKCON_SCLK0_MMC2		(1<<26)
+#define S5P_CLKCON_SCLK0_MMC1		(1<<25)
+#define S5P_CLKCON_SCLK0_MMC0		(1<<24)
+#define S5P_CLKCON_SCLK0_SPI1_48 	(1<<23)
+#define S5P_CLKCON_SCLK0_SPI0_48 	(1<<22)
+#define S5P_CLKCON_SCLK0_SPI1		(1<<21)
+#define S5P_CLKCON_SCLK0_SPI0		(1<<20)
+#define S5P_CLKCON_SCLK0_UART		(1<<5)
+
+/* SCLK1 GATE Registers */
+
+/* MEM0 GATE Registers */
+#define S5P_CLKCON_MEM0_HCLK_NFCON	(1<<2)
+
+/*OTHERS Resgister */
+#define S5P_OTHERS_USB_SIG_MASK		(1<<16)
+#define S5P_OTHERS_HCLK_LOW_SEL_MPLL	(1<<6)
+
+/* Compatibility defines */
+#define ARM_CLK_DIV			S5P_CLK_DIV0
+#define ARM_DIV_RATIO_SHIFT		0
+#define ARM_DIV_MASK			(0xf << ARM_DIV_RATIO_SHIFT)
+
+#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/regs-gpio.h b/arch/arm/mach-s5p6440/include/mach/regs-gpio.h
new file mode 100644
index 000000000000..82ff753913da
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/regs-gpio.h
@@ -0,0 +1,54 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/regs-gpio.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6440 - GPIO register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_REGS_GPIO_H
+#define __ASM_ARCH_REGS_GPIO_H __FILE__
+
+#include <mach/map.h>
+
+/* Base addresses for each of the banks */
+#define S5P6440_GPA_BASE		(S5P_VA_GPIO + 0x0000)
+#define S5P6440_GPB_BASE		(S5P_VA_GPIO + 0x0020)
+#define S5P6440_GPC_BASE		(S5P_VA_GPIO + 0x0040)
+#define S5P6440_GPF_BASE		(S5P_VA_GPIO + 0x00A0)
+#define S5P6440_GPG_BASE		(S5P_VA_GPIO + 0x00C0)
+#define S5P6440_GPH_BASE		(S5P_VA_GPIO + 0x00E0)
+#define S5P6440_GPI_BASE		(S5P_VA_GPIO + 0x0100)
+#define S5P6440_GPJ_BASE		(S5P_VA_GPIO + 0x0120)
+#define S5P6440_GPN_BASE		(S5P_VA_GPIO + 0x0830)
+#define S5P6440_GPP_BASE		(S5P_VA_GPIO + 0x0160)
+#define S5P6440_GPR_BASE		(S5P_VA_GPIO + 0x0290)
+#define S5P6440_EINT0CON0		(S5P_VA_GPIO + 0x900)
+#define S5P6440_EINT0FLTCON0		(S5P_VA_GPIO + 0x910)
+#define S5P6440_EINT0FLTCON1		(S5P_VA_GPIO + 0x914)
+#define S5P6440_EINT0MASK		(S5P_VA_GPIO + 0x920)
+#define S5P6440_EINT0PEND		(S5P_VA_GPIO + 0x924)
+
+/* for LCD */
+#define S5P6440_SPCON_LCD_SEL_RGB	(1 << 0)
+#define S5P6440_SPCON_LCD_SEL_MASK	(3 << 0)
+
+/* These set of macros are not really useful for the
+ * GPF/GPI/GPJ/GPN/GPP,
+ * useful for others set of GPIO's (4 bit)
+ */
+#define S5P6440_GPIO_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
+#define S5P6440_GPIO_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
+#define S5P6440_GPIO_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
+
+/* Use these macros for GPF/GPI/GPJ/GPN/GPP set of GPIO (2 bit)
+ * */
+#define S5P6440_GPIO2_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
+#define S5P6440_GPIO2_INPUT(__gpio)	(0x0 << ((__gpio) * 2))
+#define S5P6440_GPIO2_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
+
+#endif /* __ASM_ARCH_REGS_GPIO_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/regs-irq.h b/arch/arm/mach-s5p6440/include/mach/regs-irq.h
new file mode 100644
index 000000000000..a961f4beeb0c
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/regs-irq.h
@@ -0,0 +1,19 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/regs-irq.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6440 - IRQ register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_IRQ_H
+#define __ASM_ARCH_REGS_IRQ_H __FILE__
+
+#include <asm/hardware/vic.h>
+#include <mach/map.h>
+
+#endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/system.h b/arch/arm/mach-s5p6440/include/mach/system.h
new file mode 100644
index 000000000000..d2dd817da66a
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/system.h
@@ -0,0 +1,26 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/system.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6440 - system support header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H __FILE__
+
+static void arch_idle(void)
+{
+	/* nothing here yet */
+}
+
+static void arch_reset(char mode, const char *cmd)
+{
+	/* nothing here yet */
+}
+
+#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/tick.h b/arch/arm/mach-s5p6440/include/mach/tick.h
new file mode 100644
index 000000000000..2f25c7f07970
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/tick.h
@@ -0,0 +1,24 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/tick.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6440 - Timer tick support definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TICK_H
+#define __ASM_ARCH_TICK_H __FILE__
+
+static inline u32 s3c24xx_ostimer_pending(void)
+{
+	u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
+	return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0)));
+}
+
+#define TICK_MAX	(0xffffffff)
+
+#endif /* __ASM_ARCH_TICK_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/timex.h b/arch/arm/mach-s5p6440/include/mach/timex.h
new file mode 100644
index 000000000000..fb2e8cd40829
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/timex.h
@@ -0,0 +1,24 @@
+/* arch/arm/mach-s3c64xx/include/mach/timex.h
+ *
+ * Copyright (c) 2003-2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C6400 - time parameters
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
+ * a variable is useless. It seems as long as we make our timers an
+ * exact multiple of HZ, any value that makes a 1->1 correspondence
+ * for the time conversion functions to/from jiffies is acceptable.
+*/
+
+#define CLOCK_TICK_RATE 12000000
+
+#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/uncompress.h b/arch/arm/mach-s5p6440/include/mach/uncompress.h
new file mode 100644
index 000000000000..7c1f600d65c0
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/uncompress.h
@@ -0,0 +1,24 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/uncompress.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6440 - uncompress code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/map.h>
+#include <plat/uncompress.h>
+
+static void arch_detect_cpu(void)
+{
+	/* we do not need to do any cpu detection here at the moment. */
+}
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/vmalloc.h b/arch/arm/mach-s5p6440/include/mach/vmalloc.h
new file mode 100644
index 000000000000..16df257b1dce
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/vmalloc.h
@@ -0,0 +1,17 @@
+/* arch/arm/mach-s5p6440/include/mach/vmalloc.h
+ *
+ * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C6400 vmalloc definition
+*/
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END	  (0xE0000000)
+
+#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s5p6440/init.c b/arch/arm/mach-s5p6440/init.c
new file mode 100644
index 000000000000..a1f3727e4021
--- /dev/null
+++ b/arch/arm/mach-s5p6440/init.c
@@ -0,0 +1,52 @@
+/* linux/arch/arm/mach-s5p6440/init.c
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6440 - Init support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/s5p6440.h>
+#include <plat/regs-serial.h>
+
+static struct s3c24xx_uart_clksrc s5p6440_serial_clocks[] = {
+	[0] = {
+		.name		= "pclk_low",
+		.divisor	= 1,
+		.min_baud	= 0,
+		.max_baud	= 0,
+	},
+	[1] = {
+		.name		= "uclk1",
+		.divisor	= 1,
+		.min_baud	= 0,
+		.max_baud	= 0,
+	},
+};
+
+/* uart registration process */
+void __init s5p6440_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	struct s3c2410_uartcfg *tcfg = cfg;
+	u32 ucnt;
+
+	for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
+		if (!tcfg->clocks) {
+			tcfg->clocks = s5p6440_serial_clocks;
+			tcfg->clocks_size = ARRAY_SIZE(s5p6440_serial_clocks);
+		}
+	}
+
+	s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
+}
diff --git a/arch/arm/mach-s5p6440/mach-smdk6440.c b/arch/arm/mach-s5p6440/mach-smdk6440.c
new file mode 100644
index 000000000000..3ae88f2c7c77
--- /dev/null
+++ b/arch/arm/mach-s5p6440/mach-smdk6440.c
@@ -0,0 +1,111 @@
+/* linux/arch/arm/mach-s5p6440/mach-smdk6440.c
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+
+#include <plat/s5p6440.h>
+#include <plat/clock.h>
+#include <mach/regs-clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+
+#define S5P6440_UCON_DEFAULT    (S3C2410_UCON_TXILEVEL |	\
+				S3C2410_UCON_RXILEVEL |		\
+				S3C2410_UCON_TXIRQMODE |	\
+				S3C2410_UCON_RXIRQMODE |	\
+				S3C2410_UCON_RXFIFO_TOI |	\
+				S3C2443_UCON_RXERR_IRQEN)
+
+#define S5P6440_ULCON_DEFAULT	S3C2410_LCON_CS8
+
+#define S5P6440_UFCON_DEFAULT   (S3C2410_UFCON_FIFOMODE |	\
+				S3C2440_UFCON_TXTRIG16 |	\
+				S3C2410_UFCON_RXTRIG8)
+
+static struct s3c2410_uartcfg smdk6440_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = S5P6440_UCON_DEFAULT,
+		.ulcon	     = S5P6440_ULCON_DEFAULT,
+		.ufcon	     = S5P6440_UFCON_DEFAULT,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = S5P6440_UCON_DEFAULT,
+		.ulcon	     = S5P6440_ULCON_DEFAULT,
+		.ufcon	     = S5P6440_UFCON_DEFAULT,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = S5P6440_UCON_DEFAULT,
+		.ulcon	     = S5P6440_ULCON_DEFAULT,
+		.ufcon	     = S5P6440_UFCON_DEFAULT,
+	},
+	[3] = {
+		.hwport	     = 3,
+		.flags	     = 0,
+		.ucon	     = S5P6440_UCON_DEFAULT,
+		.ulcon	     = S5P6440_ULCON_DEFAULT,
+		.ufcon	     = S5P6440_UFCON_DEFAULT,
+	},
+};
+
+static struct platform_device *smdk6440_devices[] __initdata = {
+};
+
+static void __init smdk6440_map_io(void)
+{
+	s5p_init_io(NULL, 0, S5P_SYS_ID);
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(smdk6440_uartcfgs, ARRAY_SIZE(smdk6440_uartcfgs));
+}
+
+static void __init smdk6440_machine_init(void)
+{
+	platform_add_devices(smdk6440_devices, ARRAY_SIZE(smdk6440_devices));
+}
+
+MACHINE_START(SMDK6440, "SMDK6440")
+	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S5P_PA_SDRAM + 0x100,
+
+	.init_irq	= s5p6440_init_irq,
+	.map_io		= smdk6440_map_io,
+	.init_machine	= smdk6440_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s5p6442/Kconfig b/arch/arm/mach-s5p6442/Kconfig
new file mode 100644
index 000000000000..4f3f6de6a013
--- /dev/null
+++ b/arch/arm/mach-s5p6442/Kconfig
@@ -0,0 +1,24 @@
+# arch/arm/mach-s5p6442/Kconfig
+#
+# Copyright (c) 2010 Samsung Electronics Co., Ltd.
+#		http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+# Configuration options for the S5P6442
+
+if ARCH_S5P6442
+
+config CPU_S5P6442
+	bool
+	select PLAT_S5P
+	help
+	  Enable S5P6442 CPU support
+
+config MACH_SMDK6442
+	bool "SMDK6442"
+	select CPU_S5P6442
+	help
+	  Machine support for Samsung SMDK6442
+
+endif
diff --git a/arch/arm/mach-s5p6442/Makefile b/arch/arm/mach-s5p6442/Makefile
new file mode 100644
index 000000000000..dde39a6ce6bc
--- /dev/null
+++ b/arch/arm/mach-s5p6442/Makefile
@@ -0,0 +1,19 @@
+# arch/arm/mach-s5p6442/Makefile
+#
+# Copyright (c) 2010 Samsung Electronics Co., Ltd.
+# 		http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:=
+obj-				:=
+
+# Core support for S5P6442 system
+
+obj-$(CONFIG_CPU_S5P6442)	+= cpu.o init.o clock.o
+
+# machine support
+
+obj-$(CONFIG_MACH_SMDK6442)	+= mach-smdk6442.o
diff --git a/arch/arm/mach-s5p6442/Makefile.boot b/arch/arm/mach-s5p6442/Makefile.boot
new file mode 100644
index 000000000000..ff90aa13bd67
--- /dev/null
+++ b/arch/arm/mach-s5p6442/Makefile.boot
@@ -0,0 +1,2 @@
+   zreladdr-y	:= 0x20008000
+params_phys-y	:= 0x20000100
diff --git a/arch/arm/mach-s5p6442/clock.c b/arch/arm/mach-s5p6442/clock.c
new file mode 100644
index 000000000000..3aadbf42c112
--- /dev/null
+++ b/arch/arm/mach-s5p6442/clock.c
@@ -0,0 +1,396 @@
+/* linux/arch/arm/mach-s5p6442/clock.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6442 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+
+#include <plat/cpu-freq.h>
+#include <mach/regs-clock.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/s5p6442.h>
+
+static struct clksrc_clk clk_mout_apll = {
+	.clk	= {
+		.name		= "mout_apll",
+		.id		= -1,
+	},
+	.sources	= &clk_src_apll,
+	.reg_src	= { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 },
+};
+
+static struct clksrc_clk clk_mout_mpll = {
+	.clk = {
+		.name		= "mout_mpll",
+		.id		= -1,
+	},
+	.sources	= &clk_src_mpll,
+	.reg_src	= { .reg = S5P_CLK_SRC0, .shift = 4, .size = 1 },
+};
+
+static struct clksrc_clk clk_mout_epll = {
+	.clk	= {
+		.name		= "mout_epll",
+		.id		= -1,
+	},
+	.sources	= &clk_src_epll,
+	.reg_src	= { .reg = S5P_CLK_SRC0, .shift = 8, .size = 1 },
+};
+
+/* Possible clock sources for ARM Mux */
+static struct clk *clk_src_arm_list[] = {
+	[1] = &clk_mout_apll.clk,
+	[2] = &clk_mout_mpll.clk,
+};
+
+static struct clksrc_sources clk_src_arm = {
+	.sources	= clk_src_arm_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_arm_list),
+};
+
+static struct clksrc_clk clk_mout_arm = {
+	.clk	= {
+		.name		= "mout_arm",
+		.id		= -1,
+	},
+	.sources	= &clk_src_arm,
+	.reg_src	= { .reg = S5P_CLK_MUX_STAT0, .shift = 16, .size = 3 },
+};
+
+static struct clk clk_dout_a2m = {
+	.name		= "dout_a2m",
+	.id		= -1,
+	.parent		= &clk_mout_apll.clk,
+};
+
+/* Possible clock sources for D0 Mux */
+static struct clk *clk_src_d0_list[] = {
+	[1] = &clk_mout_mpll.clk,
+	[2] = &clk_dout_a2m,
+};
+
+static struct clksrc_sources clk_src_d0 = {
+	.sources	= clk_src_d0_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_d0_list),
+};
+
+static struct clksrc_clk clk_mout_d0 = {
+	.clk = {
+		.name		= "mout_d0",
+		.id		= -1,
+	},
+	.sources	= &clk_src_d0,
+	.reg_src	= { .reg = S5P_CLK_MUX_STAT0, .shift = 20, .size = 3 },
+};
+
+static struct clk clk_dout_apll = {
+	.name		= "dout_apll",
+	.id		= -1,
+	.parent		= &clk_mout_arm.clk,
+};
+
+/* Possible clock sources for D0SYNC Mux */
+static struct clk *clk_src_d0sync_list[] = {
+	[1] = &clk_mout_d0.clk,
+	[2] = &clk_dout_apll,
+};
+
+static struct clksrc_sources clk_src_d0sync = {
+	.sources	= clk_src_d0sync_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_d0sync_list),
+};
+
+static struct clksrc_clk clk_mout_d0sync = {
+	.clk	= {
+		.name		= "mout_d0sync",
+		.id		= -1,
+	},
+	.sources	= &clk_src_d0sync,
+	.reg_src	= { .reg = S5P_CLK_MUX_STAT1, .shift = 28, .size = 3 },
+};
+
+/* Possible clock sources for D1 Mux */
+static struct clk *clk_src_d1_list[] = {
+	[1] = &clk_mout_mpll.clk,
+	[2] = &clk_dout_a2m,
+};
+
+static struct clksrc_sources clk_src_d1 = {
+	.sources	= clk_src_d1_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_d1_list),
+};
+
+static struct clksrc_clk clk_mout_d1 = {
+	.clk	= {
+		.name		= "mout_d1",
+		.id		= -1,
+	},
+	.sources	= &clk_src_d1,
+	.reg_src	= { .reg = S5P_CLK_MUX_STAT0, .shift = 24, .size = 3 },
+};
+
+/* Possible clock sources for D1SYNC Mux */
+static struct clk *clk_src_d1sync_list[] = {
+	[1] = &clk_mout_d1.clk,
+	[2] = &clk_dout_apll,
+};
+
+static struct clksrc_sources clk_src_d1sync = {
+	.sources	= clk_src_d1sync_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_d1sync_list),
+};
+
+static struct clksrc_clk clk_mout_d1sync = {
+	.clk	= {
+		.name		= "mout_d1sync",
+		.id		= -1,
+	},
+	.sources	= &clk_src_d1sync,
+	.reg_src	= { .reg = S5P_CLK_MUX_STAT1, .shift = 24, .size = 3 },
+};
+
+static struct clk clk_hclkd0 = {
+	.name		= "hclkd0",
+	.id		= -1,
+	.parent		= &clk_mout_d0sync.clk,
+};
+
+static struct clk clk_hclkd1 = {
+	.name		= "hclkd1",
+	.id		= -1,
+	.parent		= &clk_mout_d1sync.clk,
+};
+
+static struct clk clk_pclkd0 = {
+	.name		= "pclkd0",
+	.id		= -1,
+	.parent		= &clk_hclkd0,
+};
+
+static struct clk clk_pclkd1 = {
+	.name		= "pclkd1",
+	.id		= -1,
+	.parent		= &clk_hclkd1,
+};
+
+int s5p6442_clk_ip3_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKGATE_IP3, clk, enable);
+}
+
+static struct clksrc_clk clksrcs[] = {
+	{
+		.clk	= {
+			.name		= "dout_a2m",
+			.id		= -1,
+			.parent		= &clk_mout_apll.clk,
+		},
+		.sources = &clk_src_apll,
+		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 },
+		.reg_div = { .reg = S5P_CLK_DIV0, .shift = 4, .size = 3 },
+	}, {
+		.clk	= {
+			.name		= "dout_apll",
+			.id		= -1,
+			.parent		= &clk_mout_arm.clk,
+		},
+		.sources = &clk_src_arm,
+		.reg_src = { .reg = S5P_CLK_MUX_STAT0, .shift = 16, .size = 3 },
+		.reg_div = { .reg = S5P_CLK_DIV0, .shift = 0, .size = 3 },
+	}, {
+		.clk	= {
+			.name		= "hclkd1",
+			.id		= -1,
+			.parent		= &clk_mout_d1sync.clk,
+		},
+		.sources = &clk_src_d1sync,
+		.reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 24, .size = 3 },
+		.reg_div = { .reg = S5P_CLK_DIV0, .shift = 24, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "hclkd0",
+			.id		= -1,
+			.parent		= &clk_mout_d0sync.clk,
+		},
+		.sources = &clk_src_d0sync,
+		.reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 28, .size = 3 },
+		.reg_div = { .reg = S5P_CLK_DIV0, .shift = 16, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "pclkd0",
+			.id		= -1,
+			.parent		= &clk_hclkd0,
+		},
+		.sources = &clk_src_d0sync,
+		.reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 28, .size = 3 },
+		.reg_div = { .reg = S5P_CLK_DIV0, .shift = 20, .size = 3 },
+	}, {
+		.clk	= {
+			.name		= "pclkd1",
+			.id		= -1,
+			.parent		= &clk_hclkd1,
+		},
+		.sources = &clk_src_d1sync,
+		.reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 24, .size = 3 },
+		.reg_div = { .reg = S5P_CLK_DIV0, .shift = 28, .size = 3 },
+	}
+};
+
+/* Clock initialisation code */
+static struct clksrc_clk *init_parents[] = {
+	&clk_mout_apll,
+	&clk_mout_mpll,
+	&clk_mout_epll,
+	&clk_mout_arm,
+	&clk_mout_d0,
+	&clk_mout_d0sync,
+	&clk_mout_d1,
+	&clk_mout_d1sync,
+};
+
+void __init_or_cpufreq s5p6442_setup_clocks(void)
+{
+	struct clk *pclkd0_clk;
+	struct clk *pclkd1_clk;
+
+	unsigned long xtal;
+	unsigned long arm;
+	unsigned long hclkd0 = 0;
+	unsigned long hclkd1 = 0;
+	unsigned long pclkd0 = 0;
+	unsigned long pclkd1 = 0;
+
+	unsigned long apll;
+	unsigned long mpll;
+	unsigned long epll;
+	unsigned int ptr;
+
+	printk(KERN_DEBUG "%s: registering clocks\n", __func__);
+
+	xtal = clk_get_rate(&clk_xtal);
+
+	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
+
+	apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4508);
+	mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502);
+	epll = s5p_get_pll45xx(xtal, __raw_readl(S5P_EPLL_CON), pll_4500);
+
+	printk(KERN_INFO "S5P6440: PLL settings, A=%ld, M=%ld, E=%ld",
+			apll, mpll, epll);
+
+	clk_fout_apll.rate = apll;
+	clk_fout_mpll.rate = mpll;
+	clk_fout_epll.rate = epll;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
+		s3c_set_clksrc(init_parents[ptr], true);
+
+	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+		s3c_set_clksrc(&clksrcs[ptr], true);
+
+	arm = clk_get_rate(&clk_dout_apll);
+	hclkd0 = clk_get_rate(&clk_hclkd0);
+	hclkd1 = clk_get_rate(&clk_hclkd1);
+
+	pclkd0_clk = clk_get(NULL, "pclkd0");
+	BUG_ON(IS_ERR(pclkd0_clk));
+
+	pclkd0 = clk_get_rate(pclkd0_clk);
+	clk_put(pclkd0_clk);
+
+	pclkd1_clk = clk_get(NULL, "pclkd1");
+	BUG_ON(IS_ERR(pclkd1_clk));
+
+	pclkd1 = clk_get_rate(pclkd1_clk);
+	clk_put(pclkd1_clk);
+
+	printk(KERN_INFO "S5P6442: HCLKD0=%ld, HCLKD1=%ld, PCLKD0=%ld, PCLKD1=%ld\n",
+			hclkd0, hclkd1, pclkd0, pclkd1);
+
+	/* For backward compatibility */
+	clk_f.rate = arm;
+	clk_h.rate = hclkd1;
+	clk_p.rate = pclkd1;
+
+	clk_pclkd0.rate = pclkd0;
+	clk_pclkd1.rate = pclkd1;
+}
+
+static struct clk init_clocks[] = {
+	{
+		.name		= "systimer",
+		.id		= -1,
+		.parent		= &clk_pclkd1,
+		.enable		= s5p6442_clk_ip3_ctrl,
+		.ctrlbit	= (1<<16),
+	}, {
+		.name		= "uart",
+		.id		= 0,
+		.parent		= &clk_pclkd1,
+		.enable		= s5p6442_clk_ip3_ctrl,
+		.ctrlbit	= (1<<17),
+	}, {
+		.name		= "uart",
+		.id		= 1,
+		.parent		= &clk_pclkd1,
+		.enable		= s5p6442_clk_ip3_ctrl,
+		.ctrlbit	= (1<<18),
+	}, {
+		.name		= "uart",
+		.id		= 2,
+		.parent		= &clk_pclkd1,
+		.enable		= s5p6442_clk_ip3_ctrl,
+		.ctrlbit	= (1<<19),
+	}, {
+		.name		= "timers",
+		.id		= -1,
+		.parent		= &clk_pclkd1,
+		.enable		= s5p6442_clk_ip3_ctrl,
+		.ctrlbit	= (1<<23),
+	},
+};
+
+static struct clk *clks[] __initdata = {
+	&clk_ext,
+	&clk_epll,
+	&clk_mout_apll.clk,
+	&clk_mout_mpll.clk,
+	&clk_mout_epll.clk,
+	&clk_mout_d0.clk,
+	&clk_mout_d0sync.clk,
+	&clk_mout_d1.clk,
+	&clk_mout_d1sync.clk,
+	&clk_hclkd0,
+	&clk_pclkd0,
+	&clk_hclkd1,
+	&clk_pclkd1,
+};
+
+void __init s5p6442_register_clocks(void)
+{
+	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
+
+	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+
+	s3c_pwmclk_init();
+}
diff --git a/arch/arm/mach-s5p6442/cpu.c b/arch/arm/mach-s5p6442/cpu.c
new file mode 100644
index 000000000000..bc2524df89b3
--- /dev/null
+++ b/arch/arm/mach-s5p6442/cpu.c
@@ -0,0 +1,121 @@
+/* linux/arch/arm/mach-s5p6442/cpu.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/proc-fns.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <asm/irq.h>
+
+#include <plat/regs-serial.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/s5p6442.h>
+
+/* Initial IO mappings */
+
+static struct map_desc s5p6442_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5P_VA_SYSTIMER,
+		.pfn		= __phys_to_pfn(S5P6442_PA_SYSTIMER),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC2,
+		.pfn		= __phys_to_pfn(S5P6442_PA_VIC2),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}
+};
+
+static void s5p6442_idle(void)
+{
+	if (!need_resched())
+		cpu_do_idle();
+
+	local_irq_enable();
+}
+
+/* s5p6442_map_io
+ *
+ * register the standard cpu IO areas
+*/
+
+void __init s5p6442_map_io(void)
+{
+	iotable_init(s5p6442_iodesc, ARRAY_SIZE(s5p6442_iodesc));
+}
+
+void __init s5p6442_init_clocks(int xtal)
+{
+	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+
+	s3c24xx_register_baseclocks(xtal);
+	s5p_register_clocks(xtal);
+	s5p6442_register_clocks();
+	s5p6442_setup_clocks();
+}
+
+void __init s5p6442_init_irq(void)
+{
+	/* S5P6442 supports 3 VIC */
+	u32 vic[3];
+
+	/* VIC0, VIC1, and VIC2: some interrupt reserved */
+	vic[0] = 0x7fefffff;
+	vic[1] = 0X7f389c81;
+	vic[2] = 0X1bbbcfff;
+
+	s5p_init_irq(vic, ARRAY_SIZE(vic));
+}
+
+static struct sysdev_class s5p6442_sysclass = {
+	.name	= "s5p6442-core",
+};
+
+static struct sys_device s5p6442_sysdev = {
+	.cls	= &s5p6442_sysclass,
+};
+
+static int __init s5p6442_core_init(void)
+{
+	return sysdev_class_register(&s5p6442_sysclass);
+}
+
+core_initcall(s5p6442_core_init);
+
+int __init s5p6442_init(void)
+{
+	printk(KERN_INFO "S5P6442: Initializing architecture\n");
+
+	/* set idle function */
+	pm_idle = s5p6442_idle;
+
+	return sysdev_register(&s5p6442_sysdev);
+}
diff --git a/arch/arm/mach-s5p6442/include/mach/debug-macro.S b/arch/arm/mach-s5p6442/include/mach/debug-macro.S
new file mode 100644
index 000000000000..bb6536147ffb
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/debug-macro.S
@@ -0,0 +1,36 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/debug-macro.S
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Based on arch/arm/mach-s3c6400/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* pull in the relevant register and map files. */
+
+#include <mach/map.h>
+#include <plat/regs-serial.h>
+
+	.macro addruart, rx, rtmp
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1
+		ldreq	\rx, = S3C_PA_UART
+		ldrne	\rx, = S3C_VA_UART
+#if CONFIG_DEBUG_S3C_UART != 0
+		add	\rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
+#endif
+	.endm
+
+#define fifo_full fifo_full_s5pv210
+#define fifo_level fifo_level_s5pv210
+
+/* include the reset of the code which will do the work, we're only
+ * compiling for a single cpu processor type so the default of s3c2440
+ * will be fine with us.
+ */
+
+#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-s5p6442/include/mach/entry-macro.S b/arch/arm/mach-s5p6442/include/mach/entry-macro.S
new file mode 100644
index 000000000000..6d574edbf1ae
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/entry-macro.S
@@ -0,0 +1,48 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/entry-macro.S
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Low-level IRQ helper macros for the Samsung S5P6442
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <asm/hardware/vic.h>
+#include <mach/map.h>
+#include <plat/irqs.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro	get_irqnr_preamble, base, tmp
+	ldr	\base, =VA_VIC0
+	.endm
+
+	.macro	arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+	@ check the vic0
+	mov	\irqnr, # S5P_IRQ_OFFSET + 31
+	ldr	\irqstat, [ \base, # VIC_IRQ_STATUS ]
+	teq	\irqstat, #0
+
+	@ otherwise try vic1
+	addeq	\tmp, \base, #(VA_VIC1 - VA_VIC0)
+	addeq	\irqnr, \irqnr, #32
+	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+	teqeq	\irqstat, #0
+
+	@ otherwise try vic2
+	addeq	\tmp, \base, #(VA_VIC2 - VA_VIC0)
+	addeq	\irqnr, \irqnr, #32
+	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+	teqeq	\irqstat, #0
+
+	clzne	\irqstat, \irqstat
+	subne	\irqnr, \irqnr, \irqstat
+	.endm
diff --git a/arch/arm/mach-s5p6442/include/mach/gpio.h b/arch/arm/mach-s5p6442/include/mach/gpio.h
new file mode 100644
index 000000000000..b8715df2fdab
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/gpio.h
@@ -0,0 +1,123 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/gpio.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6442 - GPIO lib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H __FILE__
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+#define gpio_to_irq	__gpio_to_irq
+
+/* GPIO bank sizes */
+#define S5P6442_GPIO_A0_NR	(8)
+#define S5P6442_GPIO_A1_NR	(2)
+#define S5P6442_GPIO_B_NR	(4)
+#define S5P6442_GPIO_C0_NR	(5)
+#define S5P6442_GPIO_C1_NR	(5)
+#define S5P6442_GPIO_D0_NR	(2)
+#define S5P6442_GPIO_D1_NR	(6)
+#define S5P6442_GPIO_E0_NR	(8)
+#define S5P6442_GPIO_E1_NR	(5)
+#define S5P6442_GPIO_F0_NR	(8)
+#define S5P6442_GPIO_F1_NR	(8)
+#define S5P6442_GPIO_F2_NR	(8)
+#define S5P6442_GPIO_F3_NR	(6)
+#define S5P6442_GPIO_G0_NR	(7)
+#define S5P6442_GPIO_G1_NR	(7)
+#define S5P6442_GPIO_G2_NR	(7)
+#define S5P6442_GPIO_H0_NR	(8)
+#define S5P6442_GPIO_H1_NR	(8)
+#define S5P6442_GPIO_H2_NR	(8)
+#define S5P6442_GPIO_H3_NR	(8)
+#define S5P6442_GPIO_J0_NR	(8)
+#define S5P6442_GPIO_J1_NR	(6)
+#define S5P6442_GPIO_J2_NR	(8)
+#define S5P6442_GPIO_J3_NR	(8)
+#define S5P6442_GPIO_J4_NR	(5)
+
+/* GPIO bank numbers */
+
+/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
+ * space for debugging purposes so that any accidental
+ * change from one gpio bank to another can be caught.
+*/
+
+#define S5P6442_GPIO_NEXT(__gpio) \
+	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
+
+enum s5p_gpio_number {
+	S5P6442_GPIO_A0_START	= 0,
+	S5P6442_GPIO_A1_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_A0),
+	S5P6442_GPIO_B_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_A1),
+	S5P6442_GPIO_C0_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_B),
+	S5P6442_GPIO_C1_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_C0),
+	S5P6442_GPIO_D0_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_C1),
+	S5P6442_GPIO_D1_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_D0),
+	S5P6442_GPIO_E0_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_D1),
+	S5P6442_GPIO_E1_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_E0),
+	S5P6442_GPIO_F0_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_E1),
+	S5P6442_GPIO_F1_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_F0),
+	S5P6442_GPIO_F2_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_F1),
+	S5P6442_GPIO_F3_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_F2),
+	S5P6442_GPIO_G0_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_F3),
+	S5P6442_GPIO_G1_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_G0),
+	S5P6442_GPIO_G2_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_G1),
+	S5P6442_GPIO_H0_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_G2),
+	S5P6442_GPIO_H1_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_H0),
+	S5P6442_GPIO_H2_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_H1),
+	S5P6442_GPIO_H3_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_H2),
+	S5P6442_GPIO_J0_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_H3),
+	S5P6442_GPIO_J1_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_J0),
+	S5P6442_GPIO_J2_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_J1),
+	S5P6442_GPIO_J3_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_J2),
+	S5P6442_GPIO_J4_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_J3),
+};
+
+/* S5P6442 GPIO number definitions. */
+#define S5P6442_GPA0(_nr)	(S5P6442_GPIO_A0_START + (_nr))
+#define S5P6442_GPA1(_nr)	(S5P6442_GPIO_A1_START + (_nr))
+#define S5P6442_GPB(_nr)	(S5P6442_GPIO_B_START + (_nr))
+#define S5P6442_GPC0(_nr)	(S5P6442_GPIO_C0_START + (_nr))
+#define S5P6442_GPC1(_nr)	(S5P6442_GPIO_C1_START + (_nr))
+#define S5P6442_GPD0(_nr)	(S5P6442_GPIO_D0_START + (_nr))
+#define S5P6442_GPD1(_nr)	(S5P6442_GPIO_D1_START + (_nr))
+#define S5P6442_GPE0(_nr)	(S5P6442_GPIO_E0_START + (_nr))
+#define S5P6442_GPE1(_nr)	(S5P6442_GPIO_E1_START + (_nr))
+#define S5P6442_GPF0(_nr)	(S5P6442_GPIO_F0_START + (_nr))
+#define S5P6442_GPF1(_nr)	(S5P6442_GPIO_F1_START + (_nr))
+#define S5P6442_GPF2(_nr)	(S5P6442_GPIO_F2_START + (_nr))
+#define S5P6442_GPF3(_nr)	(S5P6442_GPIO_F3_START + (_nr))
+#define S5P6442_GPG0(_nr)	(S5P6442_GPIO_G0_START + (_nr))
+#define S5P6442_GPG1(_nr)	(S5P6442_GPIO_G1_START + (_nr))
+#define S5P6442_GPG2(_nr)	(S5P6442_GPIO_G2_START + (_nr))
+#define S5P6442_GPH0(_nr)	(S5P6442_GPIO_H0_START + (_nr))
+#define S5P6442_GPH1(_nr)	(S5P6442_GPIO_H1_START + (_nr))
+#define S5P6442_GPH2(_nr)	(S5P6442_GPIO_H2_START + (_nr))
+#define S5P6442_GPH3(_nr)	(S5P6442_GPIO_H3_START + (_nr))
+#define S5P6442_GPJ0(_nr)	(S5P6442_GPIO_J0_START + (_nr))
+#define S5P6442_GPJ1(_nr)	(S5P6442_GPIO_J1_START + (_nr))
+#define S5P6442_GPJ2(_nr)	(S5P6442_GPIO_J2_START + (_nr))
+#define S5P6442_GPJ3(_nr)	(S5P6442_GPIO_J3_START + (_nr))
+#define S5P6442_GPJ4(_nr)	(S5P6442_GPIO_J4_START + (_nr))
+
+/* the end of the S5P6442 specific gpios */
+#define S5P6442_GPIO_END	(S5P6442_GPJ4(S5P6442_GPIO_J4_NR) + 1)
+#define S3C_GPIO_END		S5P6442_GPIO_END
+
+/* define the number of gpios we need to the one after the GPJ4() range */
+#define ARCH_NR_GPIOS		(S5P6442_GPJ4(S5P6442_GPIO_J4_NR) +	\
+				 CONFIG_SAMSUNG_GPIO_EXTRA + 1)
+
+#include <asm-generic/gpio.h>
+
+#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/hardware.h b/arch/arm/mach-s5p6442/include/mach/hardware.h
new file mode 100644
index 000000000000..8cd7b67b49d4
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/hardware.h
@@ -0,0 +1,18 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/hardware.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6442 - Hardware support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H __FILE__
+
+/* currently nothing here, placeholder */
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/io.h b/arch/arm/mach-s5p6442/include/mach/io.h
new file mode 100644
index 000000000000..5d2195ad0b67
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/io.h
@@ -0,0 +1,17 @@
+/* arch/arm/mach-s5p6442/include/mach/io.h
+ *
+ * Copyright 2008-2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * Default IO routines for S5P6442
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+/* No current ISA/PCI bus support. */
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
+
+#define IO_SPACE_LIMIT (0xFFFFFFFF)
+
+#endif
diff --git a/arch/arm/mach-s5p6442/include/mach/irqs.h b/arch/arm/mach-s5p6442/include/mach/irqs.h
new file mode 100644
index 000000000000..da665809f6e4
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/irqs.h
@@ -0,0 +1,86 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/irqs.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6442 - IRQ definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H __FILE__
+
+#include <plat/irqs.h>
+
+/* VIC0 */
+#define IRQ_EINT16_31 		S5P_IRQ_VIC0(16)
+#define IRQ_BATF 		S5P_IRQ_VIC0(17)
+#define IRQ_MDMA 		S5P_IRQ_VIC0(18)
+#define IRQ_PDMA 		S5P_IRQ_VIC0(19)
+#define IRQ_TIMER0_VIC		S5P_IRQ_VIC0(21)
+#define IRQ_TIMER1_VIC		S5P_IRQ_VIC0(22)
+#define IRQ_TIMER2_VIC		S5P_IRQ_VIC0(23)
+#define IRQ_TIMER3_VIC		S5P_IRQ_VIC0(24)
+#define IRQ_TIMER4_VIC		S5P_IRQ_VIC0(25)
+#define IRQ_SYSTIMER		S5P_IRQ_VIC0(26)
+#define IRQ_WDT			S5P_IRQ_VIC0(27)
+#define IRQ_RTC_ALARM		S5P_IRQ_VIC0(28)
+#define IRQ_RTC_TIC		S5P_IRQ_VIC0(29)
+#define IRQ_GPIOINT		S5P_IRQ_VIC0(30)
+
+/* VIC1 */
+#define IRQ_nPMUIRQ 		S5P_IRQ_VIC1(0)
+#define IRQ_ONENAND 		S5P_IRQ_VIC1(7)
+#define IRQ_UART0 		S5P_IRQ_VIC1(10)
+#define IRQ_UART1 		S5P_IRQ_VIC1(11)
+#define IRQ_UART2 		S5P_IRQ_VIC1(12)
+#define IRQ_SPI0 		S5P_IRQ_VIC1(15)
+#define IRQ_IIC 		S5P_IRQ_VIC1(19)
+#define IRQ_IIC1 		S5P_IRQ_VIC1(20)
+#define IRQ_IIC2 		S5P_IRQ_VIC1(21)
+#define IRQ_OTG 		S5P_IRQ_VIC1(24)
+#define IRQ_MSM 		S5P_IRQ_VIC1(25)
+#define IRQ_HSMMC0 		S5P_IRQ_VIC1(26)
+#define IRQ_HSMMC1 		S5P_IRQ_VIC1(27)
+#define IRQ_HSMMC2 		S5P_IRQ_VIC1(28)
+#define IRQ_COMMRX 		S5P_IRQ_VIC1(29)
+#define IRQ_COMMTX 		S5P_IRQ_VIC1(30)
+
+/* VIC2 */
+#define IRQ_LCD0 		S5P_IRQ_VIC2(0)
+#define IRQ_LCD1 		S5P_IRQ_VIC2(1)
+#define IRQ_LCD2 		S5P_IRQ_VIC2(2)
+#define IRQ_LCD3 		S5P_IRQ_VIC2(3)
+#define IRQ_ROTATOR 		S5P_IRQ_VIC2(4)
+#define IRQ_FIMC0 		S5P_IRQ_VIC2(5)
+#define IRQ_FIMC1 		S5P_IRQ_VIC2(6)
+#define IRQ_FIMC2 		S5P_IRQ_VIC2(7)
+#define IRQ_JPEG 		S5P_IRQ_VIC2(8)
+#define IRQ_3D 			S5P_IRQ_VIC2(10)
+#define IRQ_Mixer 		S5P_IRQ_VIC2(11)
+#define IRQ_MFC 		S5P_IRQ_VIC2(14)
+#define IRQ_TVENC 		S5P_IRQ_VIC2(15)
+#define IRQ_I2S0 		S5P_IRQ_VIC2(16)
+#define IRQ_I2S1 		S5P_IRQ_VIC2(17)
+#define IRQ_RP 			S5P_IRQ_VIC2(19)
+#define IRQ_PCM0 		S5P_IRQ_VIC2(20)
+#define IRQ_PCM1 		S5P_IRQ_VIC2(21)
+#define IRQ_ADC 		S5P_IRQ_VIC2(23)
+#define IRQ_PENDN 		S5P_IRQ_VIC2(24)
+#define IRQ_KEYPAD 		S5P_IRQ_VIC2(25)
+#define IRQ_SSS_INT 		S5P_IRQ_VIC2(27)
+#define IRQ_SSS_HASH 		S5P_IRQ_VIC2(28)
+#define IRQ_VIC_END 		S5P_IRQ_VIC2(31)
+
+#define S5P_IRQ_EINT_BASE	(IRQ_VIC_END + 1)
+
+#define IRQ_EINT(x)             ((x) < 16 ? S5P_IRQ_VIC0(x) : \
+					(S5P_IRQ_EINT_BASE + (x)-16))
+/* Set the default NR_IRQS */
+
+#define NR_IRQS 		(IRQ_EINT(31) + 1)
+
+#endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/map.h b/arch/arm/mach-s5p6442/include/mach/map.h
new file mode 100644
index 000000000000..685277d792fb
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/map.h
@@ -0,0 +1,58 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/map.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6442 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H __FILE__
+
+#include <plat/map-base.h>
+#include <plat/map-s5p.h>
+
+#define S5P6442_PA_CHIPID	(0xE0000000)
+#define S5P_PA_CHIPID		S5P6442_PA_CHIPID
+
+#define S5P6442_PA_SYSCON	(0xE0100000)
+#define S5P_PA_SYSCON		S5P6442_PA_SYSCON
+
+#define S5P6442_PA_GPIO		(0xE0200000)
+#define S5P_PA_GPIO		S5P6442_PA_GPIO
+
+#define S5P6442_PA_VIC0		(0xE4000000)
+#define S5P_PA_VIC0		S5P6442_PA_VIC0
+
+#define S5P6442_PA_VIC1		(0xE4100000)
+#define S5P_PA_VIC1		S5P6442_PA_VIC1
+
+#define S5P6442_PA_VIC2		(0xE4200000)
+#define S5P_PA_VIC2		S5P6442_PA_VIC2
+
+#define S5P6442_PA_TIMER	(0xEA000000)
+#define S5P_PA_TIMER		S5P6442_PA_TIMER
+
+#define S5P6442_PA_SYSTIMER   	(0xEA100000)
+
+#define S5P6442_PA_UART		(0xEC000000)
+
+#define S5P_PA_UART0		(S5P6442_PA_UART + 0x0)
+#define S5P_PA_UART1		(S5P6442_PA_UART + 0x400)
+#define S5P_PA_UART2		(S5P6442_PA_UART + 0x800)
+#define S5P_SZ_UART		SZ_256
+
+#define S5P6442_PA_IIC0		(0xEC100000)
+
+#define S5P6442_PA_SDRAM	(0x20000000)
+#define S5P_PA_SDRAM		S5P6442_PA_SDRAM
+
+/* compatibiltiy defines. */
+#define S3C_PA_UART		S5P6442_PA_UART
+#define S3C_PA_IIC		S5P6442_PA_IIC0
+
+#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/memory.h b/arch/arm/mach-s5p6442/include/mach/memory.h
new file mode 100644
index 000000000000..9ddd877ba2ea
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/memory.h
@@ -0,0 +1,19 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/memory.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6442 - Memory definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET		UL(0x20000000)
+#define CONSISTENT_DMA_SIZE	SZ_8M
+
+#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/pwm-clock.h b/arch/arm/mach-s5p6442/include/mach/pwm-clock.h
new file mode 100644
index 000000000000..15e8525da0f1
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/pwm-clock.h
@@ -0,0 +1,69 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/pwm-clock.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * Copyright 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Based on arch/arm/plat-s3c24xx/include/mach/pwm-clock.h
+ *
+ * S5P6442 - pwm clock and timer support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_PWMCLK_H
+#define __ASM_ARCH_PWMCLK_H __FILE__
+
+/**
+ * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
+ * @cfg: The timer TCFG1 register bits shifted down to 0.
+ *
+ * Return true if the given configuration from TCFG1 is a TCLK instead
+ * any of the TDIV clocks.
+ */
+static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
+{
+	return tcfg == S3C2410_TCFG1_MUX_TCLK;
+}
+
+/**
+ * tcfg_to_divisor() - convert tcfg1 setting to a divisor
+ * @tcfg1: The tcfg1 setting, shifted down.
+ *
+ * Get the divisor value for the given tcfg1 setting. We assume the
+ * caller has already checked to see if this is not a TCLK source.
+ */
+static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
+{
+	return 1 << (1 + tcfg1);
+}
+
+/**
+ * pwm_tdiv_has_div1() - does the tdiv setting have a /1
+ *
+ * Return true if we have a /1 in the tdiv setting.
+ */
+static inline unsigned int pwm_tdiv_has_div1(void)
+{
+	return 0;
+}
+
+/**
+ * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
+ * @div: The divisor to calculate the bit information for.
+ *
+ * Turn a divisor into the necessary bit field for TCFG1.
+ */
+static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
+{
+	return ilog2(div) - 1;
+}
+
+#define S3C_TCFG1_MUX_TCLK S3C2410_TCFG1_MUX_TCLK
+
+#endif /* __ASM_ARCH_PWMCLK_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/regs-clock.h b/arch/arm/mach-s5p6442/include/mach/regs-clock.h
new file mode 100644
index 000000000000..d8360b5d4ece
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/regs-clock.h
@@ -0,0 +1,103 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/regs-clock.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6442 - Clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_CLOCK_H
+#define __ASM_ARCH_REGS_CLOCK_H __FILE__
+
+#include <mach/map.h>
+
+#define S5P_CLKREG(x)		(S3C_VA_SYS + (x))
+
+#define S5P_APLL_LOCK		S5P_CLKREG(0x00)
+#define S5P_MPLL_LOCK		S5P_CLKREG(0x08)
+#define S5P_EPLL_LOCK		S5P_CLKREG(0x10)
+#define S5P_VPLL_LOCK		S5P_CLKREG(0x20)
+
+#define S5P_APLL_CON		S5P_CLKREG(0x100)
+#define S5P_MPLL_CON		S5P_CLKREG(0x108)
+#define S5P_EPLL_CON		S5P_CLKREG(0x110)
+#define S5P_VPLL_CON		S5P_CLKREG(0x120)
+
+#define S5P_CLK_SRC0		S5P_CLKREG(0x200)
+#define S5P_CLK_SRC1		S5P_CLKREG(0x204)
+#define S5P_CLK_SRC2		S5P_CLKREG(0x208)
+#define S5P_CLK_SRC3		S5P_CLKREG(0x20C)
+#define S5P_CLK_SRC4		S5P_CLKREG(0x210)
+#define S5P_CLK_SRC5		S5P_CLKREG(0x214)
+#define S5P_CLK_SRC6		S5P_CLKREG(0x218)
+
+#define S5P_CLK_SRC_MASK0	S5P_CLKREG(0x280)
+#define S5P_CLK_SRC_MASK1	S5P_CLKREG(0x284)
+
+#define S5P_CLK_DIV0		S5P_CLKREG(0x300)
+#define S5P_CLK_DIV1		S5P_CLKREG(0x304)
+#define S5P_CLK_DIV2		S5P_CLKREG(0x308)
+#define S5P_CLK_DIV3		S5P_CLKREG(0x30C)
+#define S5P_CLK_DIV4		S5P_CLKREG(0x310)
+#define S5P_CLK_DIV5		S5P_CLKREG(0x314)
+#define S5P_CLK_DIV6		S5P_CLKREG(0x318)
+
+#define S5P_CLKGATE_IP3		S5P_CLKREG(0x46C)
+
+/* CLK_OUT */
+#define S5P_CLK_OUT_SHIFT	(12)
+#define S5P_CLK_OUT_MASK	(0x1F << S5P_CLK_OUT_SHIFT)
+#define S5P_CLK_OUT		S5P_CLKREG(0x500)
+
+#define S5P_CLK_DIV_STAT0	S5P_CLKREG(0x1000)
+#define S5P_CLK_DIV_STAT1	S5P_CLKREG(0x1004)
+
+#define S5P_CLK_MUX_STAT0	S5P_CLKREG(0x1100)
+#define S5P_CLK_MUX_STAT1	S5P_CLKREG(0x1104)
+
+#define S5P_MDNIE_SEL		S5P_CLKREG(0x7008)
+
+/* Register Bit definition */
+#define S5P_EPLL_EN     		(1<<31)
+#define S5P_EPLL_MASK   		0xffffffff
+#define S5P_EPLLVAL(_m, _p, _s)   	((_m) << 16 | ((_p) << 8) | ((_s)))
+
+/* CLKDIV0 */
+#define S5P_CLKDIV0_APLL_SHIFT		(0)
+#define S5P_CLKDIV0_APLL_MASK		(0x7 << S5P_CLKDIV0_APLL_SHIFT)
+#define S5P_CLKDIV0_A2M_SHIFT		(4)
+#define S5P_CLKDIV0_A2M_MASK		(0x7 << S5P_CLKDIV0_A2M_SHIFT)
+#define S5P_CLKDIV0_D0CLK_SHIFT		(16)
+#define S5P_CLKDIV0_D0CLK_MASK		(0xF << S5P_CLKDIV0_D0CLK_SHIFT)
+#define S5P_CLKDIV0_P0CLK_SHIFT		(20)
+#define S5P_CLKDIV0_P0CLK_MASK		(0x7 << S5P_CLKDIV0_P0CLK_SHIFT)
+#define S5P_CLKDIV0_D1CLK_SHIFT		(24)
+#define S5P_CLKDIV0_D1CLK_MASK		(0xF << S5P_CLKDIV0_D1CLK_SHIFT)
+#define S5P_CLKDIV0_P1CLK_SHIFT		(28)
+#define S5P_CLKDIV0_P1CLK_MASK		(0x7 << S5P_CLKDIV0_P1CLK_SHIFT)
+
+/* Clock MUX status Registers */
+#define S5P_CLK_MUX_STAT0_APLL_SHIFT	(0)
+#define S5P_CLK_MUX_STAT0_APLL_MASK	(0x7 << S5P_CLK_MUX_STAT0_APLL_SHIFT)
+#define S5P_CLK_MUX_STAT0_MPLL_SHIFT	(4)
+#define S5P_CLK_MUX_STAT0_MPLL_MASK	(0x7 << S5P_CLK_MUX_STAT0_MPLL_SHIFT)
+#define S5P_CLK_MUX_STAT0_EPLL_SHIFT	(8)
+#define S5P_CLK_MUX_STAT0_EPLL_MASK	(0x7 << S5P_CLK_MUX_STAT0_EPLL_SHIFT)
+#define S5P_CLK_MUX_STAT0_VPLL_SHIFT	(12)
+#define S5P_CLK_MUX_STAT0_VPLL_MASK	(0x7 << S5P_CLK_MUX_STAT0_VPLL_SHIFT)
+#define S5P_CLK_MUX_STAT0_MUXARM_SHIFT	(16)
+#define S5P_CLK_MUX_STAT0_MUXARM_MASK	(0x7 << S5P_CLK_MUX_STAT0_MUXARM_SHIFT)
+#define S5P_CLK_MUX_STAT0_MUXD0_SHIFT	(20)
+#define S5P_CLK_MUX_STAT0_MUXD0_MASK	(0x7 << S5P_CLK_MUX_STAT0_MUXD0_SHIFT)
+#define S5P_CLK_MUX_STAT0_MUXD1_SHIFT	(24)
+#define S5P_CLK_MUX_STAT0_MUXD1_MASK	(0x7 << S5P_CLK_MUX_STAT0_MUXD1_SHIFT)
+#define S5P_CLK_MUX_STAT1_D1SYNC_SHIFT	(24)
+#define S5P_CLK_MUX_STAT1_D1SYNC_MASK	(0x7 << S5P_CLK_MUX_STAT1_D1SYNC_SHIFT)
+#define S5P_CLK_MUX_STAT1_D0SYNC_SHIFT	(28)
+#define S5P_CLK_MUX_STAT1_D0SYNC_MASK	(0x7 << S5P_CLK_MUX_STAT1_D0SYNC_SHIFT)
+
+#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/regs-irq.h b/arch/arm/mach-s5p6442/include/mach/regs-irq.h
new file mode 100644
index 000000000000..73782b52a83b
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/regs-irq.h
@@ -0,0 +1,19 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/regs-irq.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6442 - IRQ register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_IRQ_H
+#define __ASM_ARCH_REGS_IRQ_H __FILE__
+
+#include <asm/hardware/vic.h>
+#include <mach/map.h>
+
+#endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/system.h b/arch/arm/mach-s5p6442/include/mach/system.h
new file mode 100644
index 000000000000..8bcd8ed0c3c3
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/system.h
@@ -0,0 +1,26 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/system.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6442 - system support header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H __FILE__
+
+static void arch_idle(void)
+{
+	/* nothing here yet */
+}
+
+static void arch_reset(char mode, const char *cmd)
+{
+	/* nothing here yet */
+}
+
+#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/tick.h b/arch/arm/mach-s5p6442/include/mach/tick.h
new file mode 100644
index 000000000000..e1d4cabf8297
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/tick.h
@@ -0,0 +1,26 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/tick.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Based on arch/arm/mach-s3c6400/include/mach/tick.h
+ *
+ * S5P6442 - Timer tick support definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TICK_H
+#define __ASM_ARCH_TICK_H __FILE__
+
+static inline u32 s3c24xx_ostimer_pending(void)
+{
+	u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
+	return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0)));
+}
+
+#define TICK_MAX	(0xffffffff)
+
+#endif /* __ASM_ARCH_TICK_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/timex.h b/arch/arm/mach-s5p6442/include/mach/timex.h
new file mode 100644
index 000000000000..ff8f2fcadeb7
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/timex.h
@@ -0,0 +1,24 @@
+/* arch/arm/mach-s5p6442/include/mach/timex.h
+ *
+ * Copyright (c) 2003-2010 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S5P6442 - time parameters
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
+ * a variable is useless. It seems as long as we make our timers an
+ * exact multiple of HZ, any value that makes a 1->1 correspondence
+ * for the time conversion functions to/from jiffies is acceptable.
+*/
+
+#define CLOCK_TICK_RATE 12000000
+
+#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/uncompress.h b/arch/arm/mach-s5p6442/include/mach/uncompress.h
new file mode 100644
index 000000000000..5ac7cbeeb987
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/uncompress.h
@@ -0,0 +1,24 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/uncompress.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6442 - uncompress code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/map.h>
+#include <plat/uncompress.h>
+
+static void arch_detect_cpu(void)
+{
+	/* we do not need to do any cpu detection here at the moment. */
+}
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/vmalloc.h b/arch/arm/mach-s5p6442/include/mach/vmalloc.h
new file mode 100644
index 000000000000..be3333688c20
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/vmalloc.h
@@ -0,0 +1,17 @@
+/* arch/arm/mach-s5p6442/include/mach/vmalloc.h
+ *
+ * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S5P6442 vmalloc definition
+*/
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END	  (0xE0000000)
+
+#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s5p6442/init.c b/arch/arm/mach-s5p6442/init.c
new file mode 100644
index 000000000000..1874bdb71e1d
--- /dev/null
+++ b/arch/arm/mach-s5p6442/init.c
@@ -0,0 +1,44 @@
+/* linux/arch/arm/mach-s5p6442/s5p6442-init.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/s5p6442.h>
+#include <plat/regs-serial.h>
+
+static struct s3c24xx_uart_clksrc s5p6442_serial_clocks[] = {
+	[0] = {
+		.name		= "pclk",
+		.divisor	= 1,
+		.min_baud	= 0,
+		.max_baud	= 0,
+	},
+};
+
+/* uart registration process */
+void __init s5p6442_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	struct s3c2410_uartcfg *tcfg = cfg;
+	u32 ucnt;
+
+	for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
+		if (!tcfg->clocks) {
+			tcfg->clocks = s5p6442_serial_clocks;
+			tcfg->clocks_size = ARRAY_SIZE(s5p6442_serial_clocks);
+		}
+	}
+
+	s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no);
+}
diff --git a/arch/arm/mach-s5p6442/mach-smdk6442.c b/arch/arm/mach-s5p6442/mach-smdk6442.c
new file mode 100644
index 000000000000..0d63371ce07c
--- /dev/null
+++ b/arch/arm/mach-s5p6442/mach-smdk6442.c
@@ -0,0 +1,91 @@
+/* linux/arch/arm/mach-s5p6442/mach-smdk6442.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+#include <plat/regs-serial.h>
+#include <plat/s5p6442.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define S5P6442_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+				 S3C2410_UCON_RXILEVEL |	\
+				 S3C2410_UCON_TXIRQMODE |	\
+				 S3C2410_UCON_RXIRQMODE |	\
+				 S3C2410_UCON_RXFIFO_TOI |	\
+				 S3C2443_UCON_RXERR_IRQEN)
+
+#define S5P6442_ULCON_DEFAULT	S3C2410_LCON_CS8
+
+#define S5P6442_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+				 S5PV210_UFCON_TXTRIG4 |	\
+				 S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg smdk6442_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport		= 0,
+		.flags		= 0,
+		.ucon		= S5P6442_UCON_DEFAULT,
+		.ulcon		= S5P6442_ULCON_DEFAULT,
+		.ufcon		= S5P6442_UFCON_DEFAULT,
+	},
+	[1] = {
+		.hwport		= 1,
+		.flags		= 0,
+		.ucon		= S5P6442_UCON_DEFAULT,
+		.ulcon		= S5P6442_ULCON_DEFAULT,
+		.ufcon		= S5P6442_UFCON_DEFAULT,
+	},
+	[2] = {
+		.hwport		= 2,
+		.flags		= 0,
+		.ucon		= S5P6442_UCON_DEFAULT,
+		.ulcon		= S5P6442_ULCON_DEFAULT,
+		.ufcon		= S5P6442_UFCON_DEFAULT,
+	},
+};
+
+static struct platform_device *smdk6442_devices[] __initdata = {
+};
+
+static void __init smdk6442_map_io(void)
+{
+	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(smdk6442_uartcfgs, ARRAY_SIZE(smdk6442_uartcfgs));
+}
+
+static void __init smdk6442_machine_init(void)
+{
+	platform_add_devices(smdk6442_devices, ARRAY_SIZE(smdk6442_devices));
+}
+
+MACHINE_START(SMDK6442, "SMDK6442")
+	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.init_irq	= s5p6442_init_irq,
+	.map_io		= smdk6442_map_io,
+	.init_machine	= smdk6442_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s5pc100/include/mach/gpio-core.h b/arch/arm/mach-s5pc100/include/mach/gpio-core.h
deleted file mode 100644
index ad28d8ec8a78..000000000000
--- a/arch/arm/mach-s5pc100/include/mach/gpio-core.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* arch/arm/mach-s5pc100/include/mach/gpio-core.h
- *
- * Copyright 2009 Samsung Electronics Co.
- *      Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - GPIO core support
- *
- * Based on mach-s3c6400/include/mach/gpio-core.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_GPIO_CORE_H
-#define __ASM_ARCH_GPIO_CORE_H __FILE__
-
-/* currently we just include the platform support */
-#include <plat/gpio-core.h>
-
-#endif /* __ASM_ARCH_GPIO_CORE_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/io.h b/arch/arm/mach-s5pc100/include/mach/io.h
new file mode 100644
index 000000000000..819acf5eaf89
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/io.h
@@ -0,0 +1,18 @@
+/* arch/arm/mach-s5pc100/include/mach/io.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben-linux@fluff.org>
+ *
+ * Default IO routines for S5PC100 systems
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+/* No current ISA/PCI bus support. */
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
+
+#define IO_SPACE_LIMIT (0xFFFFFFFF)
+
+#endif
diff --git a/arch/arm/mach-s5pc100/include/mach/tick.h b/arch/arm/mach-s5pc100/include/mach/tick.h
index d3de0f3591ae..f338c9eec717 100644
--- a/arch/arm/mach-s5pc100/include/mach/tick.h
+++ b/arch/arm/mach-s5pc100/include/mach/tick.h
@@ -21,7 +21,7 @@
 static inline u32 s3c24xx_ostimer_pending(void)
 {
 	u32 pend = __raw_readl(S3C_VA_VIC0 + VIC_RAW_STATUS);
-	return pend & 1 << (IRQ_TIMER4 - S5PC1XX_IRQ_VIC0(0));
+	return pend & 1 << (IRQ_TIMER4_VIC - S5PC1XX_IRQ_VIC0(0));
 }
 
 #define TICK_MAX	(0xffffffff)
diff --git a/arch/arm/mach-s5pc100/include/mach/timex.h b/arch/arm/mach-s5pc100/include/mach/timex.h
new file mode 100644
index 000000000000..47ffb17aff96
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/timex.h
@@ -0,0 +1,24 @@
+/* arch/arm/mach-s5pc100/include/mach/timex.h
+ *
+ * Copyright (c) 2003-2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C6400 - time parameters
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
+ * a variable is useless. It seems as long as we make our timers an
+ * exact multiple of HZ, any value that makes a 1->1 correspondence
+ * for the time conversion functions to/from jiffies is acceptable.
+*/
+
+#define CLOCK_TICK_RATE 12000000
+
+#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/vmalloc.h b/arch/arm/mach-s5pc100/include/mach/vmalloc.h
new file mode 100644
index 000000000000..be9df79903ed
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/vmalloc.h
@@ -0,0 +1,17 @@
+/* arch/arm/mach-s5pc100/include/mach/vmalloc.h
+ *
+ * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C6400 vmalloc definition
+*/
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END	  (0xe0000000UL)
+
+#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s5pc100/setup-sdhci.c b/arch/arm/mach-s5pc100/setup-sdhci.c
index 4385986a3da0..ea7ff19adb95 100644
--- a/arch/arm/mach-s5pc100/setup-sdhci.c
+++ b/arch/arm/mach-s5pc100/setup-sdhci.c
@@ -28,8 +28,8 @@
 char *s5pc100_hsmmc_clksrcs[4] = {
 	[0] = "hsmmc",
 	[1] = "hsmmc",
-	/* [2] = "mmc_bus", not yet succesfuuly used yet */
-	/* [3] = "48m", - note not succesfully used yet */
+	/* [2] = "mmc_bus", not yet successfully used yet */
+	/* [3] = "48m", - note not successfully used yet */
 };
 
 
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
new file mode 100644
index 000000000000..af33a1a89b72
--- /dev/null
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -0,0 +1,40 @@
+# arch/arm/mach-s5pv210/Kconfig
+#
+# Copyright (c) 2010 Samsung Electronics Co., Ltd.
+#		http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+# Configuration options for the S5PV210/S5PC110
+
+if ARCH_S5PV210
+
+config CPU_S5PV210
+	bool
+	select PLAT_S5P
+	help
+	  Enable S5PV210 CPU support
+
+choice
+	prompt "Select machine type"
+	depends on ARCH_S5PV210
+	default MACH_SMDKV210
+
+config MACH_SMDKV210
+	bool "SMDKV210"
+	select CPU_S5PV210
+	select ARCH_SPARSEMEM_ENABLE
+	help
+	  Machine support for Samsung SMDKV210
+
+config MACH_SMDKC110
+	bool "SMDKC110"
+	select CPU_S5PV210
+	select ARCH_SPARSEMEM_ENABLE
+	help
+	  Machine support for Samsung SMDKC110
+	  S5PC110(MCP) is one of package option of S5PV210
+
+endchoice
+
+endif
diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile
new file mode 100644
index 000000000000..8ebf51c52a01
--- /dev/null
+++ b/arch/arm/mach-s5pv210/Makefile
@@ -0,0 +1,20 @@
+# arch/arm/mach-s5pv210/Makefile
+#
+# Copyright (c) 2010 Samsung Electronics Co., Ltd.
+# 		http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:=
+obj-				:=
+
+# Core support for S5PV210 system
+
+obj-$(CONFIG_CPU_S5PV210)	+= cpu.o init.o clock.o
+
+# machine support
+
+obj-$(CONFIG_MACH_SMDKV210)	+= mach-smdkv210.o
+obj-$(CONFIG_MACH_SMDKC110)	+= mach-smdkc110.o
diff --git a/arch/arm/mach-s5pv210/Makefile.boot b/arch/arm/mach-s5pv210/Makefile.boot
new file mode 100644
index 000000000000..ff90aa13bd67
--- /dev/null
+++ b/arch/arm/mach-s5pv210/Makefile.boot
@@ -0,0 +1,2 @@
+   zreladdr-y	:= 0x20008000
+params_phys-y	:= 0x20000100
diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
new file mode 100644
index 000000000000..ccccae262351
--- /dev/null
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -0,0 +1,454 @@
+/* linux/arch/arm/mach-s5pv210/clock.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV210 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+
+#include <plat/cpu-freq.h>
+#include <mach/regs-clock.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/s5pv210.h>
+
+static int s5pv210_clk_ip0_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKGATE_IP0, clk, enable);
+}
+
+static int s5pv210_clk_ip1_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKGATE_IP1, clk, enable);
+}
+
+static int s5pv210_clk_ip2_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKGATE_IP2, clk, enable);
+}
+
+static int s5pv210_clk_ip3_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKGATE_IP3, clk, enable);
+}
+
+static struct clk clk_h200 = {
+	.name		= "hclk200",
+	.id		= -1,
+};
+
+static struct clk clk_h100 = {
+	.name		= "hclk100",
+	.id		= -1,
+};
+
+static struct clk clk_h166 = {
+	.name		= "hclk166",
+	.id		= -1,
+};
+
+static struct clk clk_h133 = {
+	.name		= "hclk133",
+	.id		= -1,
+};
+
+static struct clk clk_p100 = {
+	.name		= "pclk100",
+	.id		= -1,
+};
+
+static struct clk clk_p83 = {
+	.name		= "pclk83",
+	.id		= -1,
+};
+
+static struct clk clk_p66 = {
+	.name		= "pclk66",
+	.id		= -1,
+};
+
+static struct clk *sys_clks[] = {
+	&clk_h200,
+	&clk_h100,
+	&clk_h166,
+	&clk_h133,
+	&clk_p100,
+	&clk_p83,
+	&clk_p66
+};
+
+static struct clk init_clocks_disable[] = {
+	{
+		.name		= "rot",
+		.id		= -1,
+		.parent		= &clk_h166,
+		.enable		= s5pv210_clk_ip0_ctrl,
+		.ctrlbit	= (1<<29),
+	}, {
+		.name		= "otg",
+		.id		= -1,
+		.parent		= &clk_h133,
+		.enable		= s5pv210_clk_ip1_ctrl,
+		.ctrlbit	= (1<<16),
+	}, {
+		.name		= "usb-host",
+		.id		= -1,
+		.parent		= &clk_h133,
+		.enable		= s5pv210_clk_ip1_ctrl,
+		.ctrlbit	= (1<<17),
+	}, {
+		.name		= "lcd",
+		.id		= -1,
+		.parent		= &clk_h166,
+		.enable		= s5pv210_clk_ip1_ctrl,
+		.ctrlbit	= (1<<0),
+	}, {
+		.name		= "cfcon",
+		.id		= 0,
+		.parent		= &clk_h133,
+		.enable		= s5pv210_clk_ip1_ctrl,
+		.ctrlbit	= (1<<25),
+	}, {
+		.name		= "hsmmc",
+		.id		= 0,
+		.parent		= &clk_h133,
+		.enable		= s5pv210_clk_ip2_ctrl,
+		.ctrlbit	= (1<<16),
+	}, {
+		.name		= "hsmmc",
+		.id		= 1,
+		.parent		= &clk_h133,
+		.enable		= s5pv210_clk_ip2_ctrl,
+		.ctrlbit	= (1<<17),
+	}, {
+		.name		= "hsmmc",
+		.id		= 2,
+		.parent		= &clk_h133,
+		.enable		= s5pv210_clk_ip2_ctrl,
+		.ctrlbit	= (1<<18),
+	}, {
+		.name		= "hsmmc",
+		.id		= 3,
+		.parent		= &clk_h133,
+		.enable		= s5pv210_clk_ip2_ctrl,
+		.ctrlbit	= (1<<19),
+	}, {
+		.name		= "systimer",
+		.id		= -1,
+		.parent		= &clk_p66,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1<<16),
+	}, {
+		.name		= "watchdog",
+		.id		= -1,
+		.parent		= &clk_p66,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1<<22),
+	}, {
+		.name		= "rtc",
+		.id		= -1,
+		.parent		= &clk_p66,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1<<15),
+	}, {
+		.name		= "i2c",
+		.id		= 0,
+		.parent		= &clk_p66,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1<<7),
+	}, {
+		.name		= "i2c",
+		.id		= 1,
+		.parent		= &clk_p66,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1<<8),
+	}, {
+		.name		= "i2c",
+		.id		= 2,
+		.parent		= &clk_p66,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1<<9),
+	}, {
+		.name		= "spi",
+		.id		= 0,
+		.parent		= &clk_p66,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1<<12),
+	}, {
+		.name		= "spi",
+		.id		= 1,
+		.parent		= &clk_p66,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1<<13),
+	}, {
+		.name		= "spi",
+		.id		= 2,
+		.parent		= &clk_p66,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1<<14),
+	}, {
+		.name		= "timers",
+		.id		= -1,
+		.parent		= &clk_p66,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1<<23),
+	}, {
+		.name		= "adc",
+		.id		= -1,
+		.parent		= &clk_p66,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1<<24),
+	}, {
+		.name		= "keypad",
+		.id		= -1,
+		.parent		= &clk_p66,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1<<21),
+	}, {
+		.name		= "i2s_v50",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1<<4),
+	}, {
+		.name		= "i2s_v32",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1<<4),
+	}, {
+		.name		= "i2s_v32",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1<<4),
+	}
+};
+
+static struct clk init_clocks[] = {
+	{
+		.name		= "uart",
+		.id		= 0,
+		.parent		= &clk_p66,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1<<7),
+	}, {
+		.name		= "uart",
+		.id		= 1,
+		.parent		= &clk_p66,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1<<8),
+	}, {
+		.name		= "uart",
+		.id		= 2,
+		.parent		= &clk_p66,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1<<9),
+	}, {
+		.name		= "uart",
+		.id		= 3,
+		.parent		= &clk_p66,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1<<10),
+	},
+};
+
+static struct clksrc_clk clk_mout_apll = {
+	.clk	= {
+		.name		= "mout_apll",
+		.id		= -1,
+	},
+	.sources	= &clk_src_apll,
+	.reg_src	= { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 },
+};
+
+static struct clksrc_clk clk_mout_epll = {
+	.clk	= {
+		.name		= "mout_epll",
+		.id		= -1,
+	},
+	.sources	= &clk_src_epll,
+	.reg_src	= { .reg = S5P_CLK_SRC0, .shift = 8, .size = 1 },
+};
+
+static struct clksrc_clk clk_mout_mpll = {
+	.clk = {
+		.name		= "mout_mpll",
+		.id		= -1,
+	},
+	.sources	= &clk_src_mpll,
+	.reg_src	= { .reg = S5P_CLK_SRC0, .shift = 4, .size = 1 },
+};
+
+static struct clk *clkset_uart_list[] = {
+	[6] = &clk_mout_mpll.clk,
+	[7] = &clk_mout_epll.clk,
+};
+
+static struct clksrc_sources clkset_uart = {
+	.sources	= clkset_uart_list,
+	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
+};
+
+static struct clksrc_clk clksrcs[] = {
+	{
+		.clk	= {
+			.name		= "uclk1",
+			.id		= -1,
+			.ctrlbit	= (1<<17),
+			.enable		= s5pv210_clk_ip3_ctrl,
+		},
+		.sources = &clkset_uart,
+		.reg_src = { .reg = S5P_CLK_SRC4, .shift = 16, .size = 4 },
+		.reg_div = { .reg = S5P_CLK_DIV4, .shift = 16, .size = 4 },
+	}
+};
+
+/* Clock initialisation code */
+static struct clksrc_clk *init_parents[] = {
+	&clk_mout_apll,
+	&clk_mout_epll,
+	&clk_mout_mpll,
+};
+
+#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
+
+void __init_or_cpufreq s5pv210_setup_clocks(void)
+{
+	struct clk *xtal_clk;
+	unsigned long xtal;
+	unsigned long armclk;
+	unsigned long hclk200;
+	unsigned long hclk166;
+	unsigned long hclk133;
+	unsigned long pclk100;
+	unsigned long pclk83;
+	unsigned long pclk66;
+	unsigned long apll;
+	unsigned long mpll;
+	unsigned long epll;
+	unsigned int ptr;
+	u32 clkdiv0, clkdiv1;
+
+	printk(KERN_DEBUG "%s: registering clocks\n", __func__);
+
+	clkdiv0 = __raw_readl(S5P_CLK_DIV0);
+	clkdiv1 = __raw_readl(S5P_CLK_DIV1);
+
+	printk(KERN_DEBUG "%s: clkdiv0 = %08x, clkdiv1 = %08x\n",
+				__func__, clkdiv0, clkdiv1);
+
+	xtal_clk = clk_get(NULL, "xtal");
+	BUG_ON(IS_ERR(xtal_clk));
+
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
+
+	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
+
+	apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4508);
+	mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502);
+	epll = s5p_get_pll45xx(xtal, __raw_readl(S5P_EPLL_CON), pll_4500);
+
+	printk(KERN_INFO "S5PV210: PLL settings, A=%ld, M=%ld, E=%ld",
+			apll, mpll, epll);
+
+	armclk = apll / GET_DIV(clkdiv0, S5P_CLKDIV0_APLL);
+	if (__raw_readl(S5P_CLK_SRC0) & S5P_CLKSRC0_MUX200_MASK)
+		hclk200 = mpll / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK200);
+	else
+		hclk200 = armclk / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK200);
+
+	if (__raw_readl(S5P_CLK_SRC0) & S5P_CLKSRC0_MUX166_MASK) {
+		hclk166 = apll / GET_DIV(clkdiv0, S5P_CLKDIV0_A2M);
+		hclk166 = hclk166 / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK166);
+	} else
+		hclk166 = mpll / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK166);
+
+	if (__raw_readl(S5P_CLK_SRC0) & S5P_CLKSRC0_MUX133_MASK) {
+		hclk133 = apll / GET_DIV(clkdiv0, S5P_CLKDIV0_A2M);
+		hclk133 = hclk133 / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK133);
+	} else
+		hclk133 = mpll / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK133);
+
+	pclk100 = hclk200 / GET_DIV(clkdiv0, S5P_CLKDIV0_PCLK100);
+	pclk83 = hclk166 / GET_DIV(clkdiv0, S5P_CLKDIV0_PCLK83);
+	pclk66 = hclk133 / GET_DIV(clkdiv0, S5P_CLKDIV0_PCLK66);
+
+	printk(KERN_INFO "S5PV210: ARMCLK=%ld, HCLKM=%ld, HCLKD=%ld, \
+			HCLKP=%ld, PCLKM=%ld, PCLKD=%ld, PCLKP=%ld\n",
+	       armclk, hclk200, hclk166, hclk133, pclk100, pclk83, pclk66);
+
+	clk_fout_apll.rate = apll;
+	clk_fout_mpll.rate = mpll;
+	clk_fout_epll.rate = epll;
+
+	clk_f.rate = armclk;
+	clk_h.rate = hclk133;
+	clk_p.rate = pclk66;
+	clk_p66.rate = pclk66;
+	clk_p83.rate = pclk83;
+	clk_h133.rate = hclk133;
+	clk_h166.rate = hclk166;
+	clk_h200.rate = hclk200;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
+		s3c_set_clksrc(init_parents[ptr], true);
+
+	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+		s3c_set_clksrc(&clksrcs[ptr], true);
+}
+
+static struct clk *clks[] __initdata = {
+	&clk_mout_epll.clk,
+	&clk_mout_mpll.clk,
+};
+
+void __init s5pv210_register_clocks(void)
+{
+	struct clk *clkp;
+	int ret;
+	int ptr;
+
+	ret = s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
+	if (ret > 0)
+		printk(KERN_ERR "Failed to register %u clocks\n", ret);
+
+	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+
+	ret = s3c24xx_register_clocks(sys_clks, ARRAY_SIZE(sys_clks));
+	if (ret > 0)
+		printk(KERN_ERR "Failed to register system clocks\n");
+
+	clkp = init_clocks_disable;
+	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+		(clkp->enable)(clkp, 0);
+	}
+
+	s3c_pwmclk_init();
+}
diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c
new file mode 100644
index 000000000000..0e0f8fde2aa6
--- /dev/null
+++ b/arch/arm/mach-s5pv210/cpu.c
@@ -0,0 +1,126 @@
+/* linux/arch/arm/mach-s5pv210/cpu.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/proc-fns.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/s5pv210.h>
+
+/* Initial IO mappings */
+
+static struct map_desc s5pv210_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5P_VA_SYSTIMER,
+		.pfn		= __phys_to_pfn(S5PV210_PA_SYSTIMER),
+		.length		= SZ_1M,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC2,
+		.pfn		= __phys_to_pfn(S5PV210_PA_VIC2),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC3,
+		.pfn		= __phys_to_pfn(S5PV210_PA_VIC3),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_SROMC,
+		.pfn		= __phys_to_pfn(S5PV210_PA_SROMC),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}
+};
+
+static void s5pv210_idle(void)
+{
+	if (!need_resched())
+		cpu_do_idle();
+
+	local_irq_enable();
+}
+
+/* s5pv210_map_io
+ *
+ * register the standard cpu IO areas
+*/
+
+void __init s5pv210_map_io(void)
+{
+	iotable_init(s5pv210_iodesc, ARRAY_SIZE(s5pv210_iodesc));
+}
+
+void __init s5pv210_init_clocks(int xtal)
+{
+	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+
+	s3c24xx_register_baseclocks(xtal);
+	s5p_register_clocks(xtal);
+	s5pv210_register_clocks();
+	s5pv210_setup_clocks();
+}
+
+void __init s5pv210_init_irq(void)
+{
+	u32 vic[4];	/* S5PV210 supports 4 VIC */
+
+	/* All the VICs are fully populated. */
+	vic[0] = ~0;
+	vic[1] = ~0;
+	vic[2] = ~0;
+	vic[3] = ~0;
+
+	s5p_init_irq(vic, ARRAY_SIZE(vic));
+}
+
+static struct sysdev_class s5pv210_sysclass = {
+	.name	= "s5pv210-core",
+};
+
+static struct sys_device s5pv210_sysdev = {
+	.cls	= &s5pv210_sysclass,
+};
+
+static int __init s5pv210_core_init(void)
+{
+	return sysdev_class_register(&s5pv210_sysclass);
+}
+
+core_initcall(s5pv210_core_init);
+
+int __init s5pv210_init(void)
+{
+	printk(KERN_INFO "S5PV210: Initializing architecture\n");
+
+	/* set idle function */
+	pm_idle = s5pv210_idle;
+
+	return sysdev_register(&s5pv210_sysdev);
+}
diff --git a/arch/arm/mach-s5pv210/include/mach/debug-macro.S b/arch/arm/mach-s5pv210/include/mach/debug-macro.S
new file mode 100644
index 000000000000..7872f5c3dfc2
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/debug-macro.S
@@ -0,0 +1,42 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/debug-macro.S
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Based on arch/arm/mach-s3c6400/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* pull in the relevant register and map files. */
+
+#include <mach/map.h>
+#include <plat/regs-serial.h>
+
+	/* note, for the boot process to work we have to keep the UART
+	 * virtual address aligned to an 1MiB boundary for the L1
+	 * mapping the head code makes. We keep the UART virtual address
+	 * aligned and add in the offset when we load the value here.
+	 */
+
+	.macro addruart, rx, tmp
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1
+		ldreq	\rx, = S3C_PA_UART
+		ldrne	\rx, = S3C_VA_UART
+#if CONFIG_DEBUG_S3C_UART != 0
+		add	\rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
+#endif
+	.endm
+
+#define fifo_full fifo_full_s5pv210
+#define fifo_level fifo_level_s5pv210
+
+/* include the reset of the code which will do the work, we're only
+ * compiling for a single cpu processor type so the default of s3c2440
+ * will be fine with us.
+ */
+
+#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-s5pv210/include/mach/entry-macro.S b/arch/arm/mach-s5pv210/include/mach/entry-macro.S
new file mode 100644
index 000000000000..3aa41ac59f07
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/entry-macro.S
@@ -0,0 +1,54 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/entry-macro.S
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Low-level IRQ helper macros for the Samsung S5PV210
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <asm/hardware/vic.h>
+#include <mach/map.h>
+#include <plat/irqs.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro	get_irqnr_preamble, base, tmp
+	ldr	\base, =VA_VIC0
+	.endm
+
+	.macro	arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+	@ check the vic0
+	mov	\irqnr, # S5P_IRQ_OFFSET + 31
+	ldr	\irqstat, [ \base, # VIC_IRQ_STATUS ]
+	teq	\irqstat, #0
+
+	@ otherwise try vic1
+	addeq	\tmp, \base, #(VA_VIC1 - VA_VIC0)
+	addeq	\irqnr, \irqnr, #32
+	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+	teqeq	\irqstat, #0
+
+	@ otherwise try vic2
+	addeq	\tmp, \base, #(VA_VIC2 - VA_VIC0)
+	addeq	\irqnr, \irqnr, #32
+	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+	teqeq	\irqstat, #0
+
+	@ otherwise try vic3
+	addeq	\tmp, \base, #(VA_VIC3 - VA_VIC0)
+	addeq	\irqnr, \irqnr, #32
+	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+	teqeq	\irqstat, #0
+
+	clzne	\irqstat, \irqstat
+	subne	\irqnr, \irqnr, \irqstat
+	.endm
diff --git a/arch/arm/mach-s5pv210/include/mach/gpio.h b/arch/arm/mach-s5pv210/include/mach/gpio.h
new file mode 100644
index 000000000000..533b020e21e9
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/gpio.h
@@ -0,0 +1,129 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/gpio.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV210 - GPIO lib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H __FILE__
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+#define gpio_to_irq	__gpio_to_irq
+
+/* GPIO bank sizes */
+#define S5PV210_GPIO_A0_NR	(8)
+#define S5PV210_GPIO_A1_NR	(4)
+#define S5PV210_GPIO_B_NR	(8)
+#define S5PV210_GPIO_C0_NR	(5)
+#define S5PV210_GPIO_C1_NR	(5)
+#define S5PV210_GPIO_D0_NR	(4)
+#define S5PV210_GPIO_D1_NR	(6)
+#define S5PV210_GPIO_E0_NR	(8)
+#define S5PV210_GPIO_E1_NR	(5)
+#define S5PV210_GPIO_F0_NR	(8)
+#define S5PV210_GPIO_F1_NR	(8)
+#define S5PV210_GPIO_F2_NR	(8)
+#define S5PV210_GPIO_F3_NR	(6)
+#define S5PV210_GPIO_G0_NR	(7)
+#define S5PV210_GPIO_G1_NR	(7)
+#define S5PV210_GPIO_G2_NR	(7)
+#define S5PV210_GPIO_G3_NR	(7)
+#define S5PV210_GPIO_H0_NR	(8)
+#define S5PV210_GPIO_H1_NR	(8)
+#define S5PV210_GPIO_H2_NR	(8)
+#define S5PV210_GPIO_H3_NR	(8)
+#define S5PV210_GPIO_I_NR	(7)
+#define S5PV210_GPIO_J0_NR	(8)
+#define S5PV210_GPIO_J1_NR	(6)
+#define S5PV210_GPIO_J2_NR	(8)
+#define S5PV210_GPIO_J3_NR	(8)
+#define S5PV210_GPIO_J4_NR	(5)
+
+/* GPIO bank numbers */
+
+/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
+ * space for debugging purposes so that any accidental
+ * change from one gpio bank to another can be caught.
+*/
+
+#define S5PV210_GPIO_NEXT(__gpio) \
+	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
+
+enum s5p_gpio_number {
+	S5PV210_GPIO_A0_START	= 0,
+	S5PV210_GPIO_A1_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_A0),
+	S5PV210_GPIO_B_START 	= S5PV210_GPIO_NEXT(S5PV210_GPIO_A1),
+	S5PV210_GPIO_C0_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_B),
+	S5PV210_GPIO_C1_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_C0),
+	S5PV210_GPIO_D0_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_C1),
+	S5PV210_GPIO_D1_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_D0),
+	S5PV210_GPIO_E0_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_D1),
+	S5PV210_GPIO_E1_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_E0),
+	S5PV210_GPIO_F0_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_E1),
+	S5PV210_GPIO_F1_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_F0),
+	S5PV210_GPIO_F2_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_F1),
+	S5PV210_GPIO_F3_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_F2),
+	S5PV210_GPIO_G0_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_F3),
+	S5PV210_GPIO_G1_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_G0),
+	S5PV210_GPIO_G2_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_G1),
+	S5PV210_GPIO_G3_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_G2),
+	S5PV210_GPIO_H0_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_G3),
+	S5PV210_GPIO_H1_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_H0),
+	S5PV210_GPIO_H2_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_H1),
+	S5PV210_GPIO_H3_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_H2),
+	S5PV210_GPIO_I_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_H3),
+	S5PV210_GPIO_J0_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_I),
+	S5PV210_GPIO_J1_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_J0),
+	S5PV210_GPIO_J2_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_J1),
+	S5PV210_GPIO_J3_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_J2),
+	S5PV210_GPIO_J4_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_J3),
+};
+
+/* S5PV210 GPIO number definitions */
+#define S5PV210_GPA0(_nr)	(S5PV210_GPIO_A0_START + (_nr))
+#define S5PV210_GPA1(_nr)	(S5PV210_GPIO_A1_START + (_nr))
+#define S5PV210_GPB(_nr)	(S5PV210_GPIO_B_START + (_nr))
+#define S5PV210_GPC0(_nr)	(S5PV210_GPIO_C0_START + (_nr))
+#define S5PV210_GPC1(_nr)	(S5PV210_GPIO_C1_START + (_nr))
+#define S5PV210_GPD0(_nr)	(S5PV210_GPIO_D0_START + (_nr))
+#define S5PV210_GPD1(_nr)	(S5PV210_GPIO_D1_START + (_nr))
+#define S5PV210_GPE0(_nr)	(S5PV210_GPIO_E0_START + (_nr))
+#define S5PV210_GPE1(_nr)	(S5PV210_GPIO_E1_START + (_nr))
+#define S5PV210_GPF0(_nr)	(S5PV210_GPIO_F0_START + (_nr))
+#define S5PV210_GPF1(_nr)	(S5PV210_GPIO_F1_START + (_nr))
+#define S5PV210_GPF2(_nr)	(S5PV210_GPIO_F2_START + (_nr))
+#define S5PV210_GPF3(_nr)	(S5PV210_GPIO_F3_START + (_nr))
+#define S5PV210_GPG0(_nr)	(S5PV210_GPIO_G0_START + (_nr))
+#define S5PV210_GPG1(_nr)	(S5PV210_GPIO_G1_START + (_nr))
+#define S5PV210_GPG2(_nr)	(S5PV210_GPIO_G2_START + (_nr))
+#define S5PV210_GPG3(_nr)	(S5PV210_GPIO_G3_START + (_nr))
+#define S5PV210_GPH0(_nr)	(S5PV210_GPIO_H0_START + (_nr))
+#define S5PV210_GPH1(_nr)	(S5PV210_GPIO_H1_START + (_nr))
+#define S5PV210_GPH2(_nr)	(S5PV210_GPIO_H2_START + (_nr))
+#define S5PV210_GPH3(_nr)	(S5PV210_GPIO_H3_START + (_nr))
+#define S5PV210_GPI(_nr)	(S5PV210_GPIO_I_START + (_nr))
+#define S5PV210_GPJ0(_nr)	(S5PV210_GPIO_J0_START + (_nr))
+#define S5PV210_GPJ1(_nr)	(S5PV210_GPIO_J1_START + (_nr))
+#define S5PV210_GPJ2(_nr)	(S5PV210_GPIO_J2_START + (_nr))
+#define S5PV210_GPJ3(_nr)	(S5PV210_GPIO_J3_START + (_nr))
+#define S5PV210_GPJ4(_nr)	(S5PV210_GPIO_J4_START + (_nr))
+
+/* the end of the S5PV210 specific gpios */
+#define S5PV210_GPIO_END	(S5PV210_GPJ4(S5PV210_GPIO_J4_NR) + 1)
+#define S3C_GPIO_END		S5PV210_GPIO_END
+
+/* define the number of gpios we need to the one after the GPJ4() range */
+#define ARCH_NR_GPIOS		(S5PV210_GPJ4(S5PV210_GPIO_J4_NR) +	\
+				 CONFIG_SAMSUNG_GPIO_EXTRA + 1)
+
+#include <asm-generic/gpio.h>
+
+#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/hardware.h b/arch/arm/mach-s5pv210/include/mach/hardware.h
new file mode 100644
index 000000000000..fada7a392d09
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/hardware.h
@@ -0,0 +1,18 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/hardware.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV210 - Hardware support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H __FILE__
+
+/* currently nothing here, placeholder */
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/io.h b/arch/arm/mach-s5pv210/include/mach/io.h
new file mode 100644
index 000000000000..5ab9d560bc86
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/io.h
@@ -0,0 +1,26 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/io.h
+ *
+ * Copyright 2008-2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Based on arch/arm/mach-s5p6442/include/mach/io.h
+ *
+ * Default IO routines for S5PV210
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H __FILE__
+
+/* No current ISA/PCI bus support. */
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
+
+#define IO_SPACE_LIMIT (0xFFFFFFFF)
+
+#endif /* __ASM_ARM_ARCH_IO_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h
new file mode 100644
index 000000000000..62c5175ef291
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/irqs.h
@@ -0,0 +1,146 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/irqs.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV210 - IRQ definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H __FILE__
+
+#include <plat/irqs.h>
+
+/* VIC0: System, DMA, Timer */
+
+#define IRQ_EINT0		S5P_IRQ_VIC0(0)
+#define IRQ_EINT1		S5P_IRQ_VIC0(1)
+#define IRQ_EINT2		S5P_IRQ_VIC0(2)
+#define IRQ_EINT3		S5P_IRQ_VIC0(3)
+#define IRQ_EINT4		S5P_IRQ_VIC0(4)
+#define IRQ_EINT5		S5P_IRQ_VIC0(5)
+#define IRQ_EINT6		S5P_IRQ_VIC0(6)
+#define IRQ_EINT7		S5P_IRQ_VIC0(7)
+#define IRQ_EINT8		S5P_IRQ_VIC0(8)
+#define IRQ_EINT9		S5P_IRQ_VIC0(9)
+#define IRQ_EINT10		S5P_IRQ_VIC0(10)
+#define IRQ_EINT11		S5P_IRQ_VIC0(11)
+#define IRQ_EINT12		S5P_IRQ_VIC0(12)
+#define IRQ_EINT13		S5P_IRQ_VIC0(13)
+#define IRQ_EINT14		S5P_IRQ_VIC0(14)
+#define IRQ_EINT15		S5P_IRQ_VIC0(15)
+#define IRQ_EINT16_31		S5P_IRQ_VIC0(16)
+#define IRQ_BATF		S5P_IRQ_VIC0(17)
+#define IRQ_MDMA		S5P_IRQ_VIC0(18)
+#define IRQ_PDMA0		S5P_IRQ_VIC0(19)
+#define IRQ_PDMA1		S5P_IRQ_VIC0(20)
+#define IRQ_TIMER0_VIC		S5P_IRQ_VIC0(21)
+#define IRQ_TIMER1_VIC		S5P_IRQ_VIC0(22)
+#define IRQ_TIMER2_VIC		S5P_IRQ_VIC0(23)
+#define IRQ_TIMER3_VIC		S5P_IRQ_VIC0(24)
+#define IRQ_TIMER4_VIC		S5P_IRQ_VIC0(25)
+#define IRQ_SYSTIMER		S5P_IRQ_VIC0(26)
+#define IRQ_WDT			S5P_IRQ_VIC0(27)
+#define IRQ_RTC_ALARM		S5P_IRQ_VIC0(28)
+#define IRQ_RTC_TIC		S5P_IRQ_VIC0(29)
+#define IRQ_GPIOINT		S5P_IRQ_VIC0(30)
+#define IRQ_FIMC3		S5P_IRQ_VIC0(31)
+
+/* VIC1: ARM, Power, Memory, Connectivity, Storage */
+
+#define IRQ_CORTEX0		S5P_IRQ_VIC1(0)
+#define IRQ_CORTEX1		S5P_IRQ_VIC1(1)
+#define IRQ_CORTEX2		S5P_IRQ_VIC1(2)
+#define IRQ_CORTEX3		S5P_IRQ_VIC1(3)
+#define IRQ_CORTEX4		S5P_IRQ_VIC1(4)
+#define IRQ_IEMAPC		S5P_IRQ_VIC1(5)
+#define IRQ_IEMIEC		S5P_IRQ_VIC1(6)
+#define IRQ_ONENAND		S5P_IRQ_VIC1(7)
+#define IRQ_NFC			S5P_IRQ_VIC1(8)
+#define IRQ_CFC			S5P_IRQ_VIC1(9)
+#define IRQ_UART0		S5P_IRQ_VIC1(10)
+#define IRQ_UART1		S5P_IRQ_VIC1(11)
+#define IRQ_UART2		S5P_IRQ_VIC1(12)
+#define IRQ_UART3		S5P_IRQ_VIC1(13)
+#define IRQ_IIC			S5P_IRQ_VIC1(14)
+#define IRQ_SPI0		S5P_IRQ_VIC1(15)
+#define IRQ_SPI1		S5P_IRQ_VIC1(16)
+#define IRQ_SPI2		S5P_IRQ_VIC1(17)
+#define IRQ_IRDA		S5P_IRQ_VIC1(18)
+#define IRQ_CAN0		S5P_IRQ_VIC1(19)
+#define IRQ_CAN1		S5P_IRQ_VIC1(20)
+#define IRQ_HSIRX		S5P_IRQ_VIC1(21)
+#define IRQ_HSITX		S5P_IRQ_VIC1(22)
+#define IRQ_UHOST		S5P_IRQ_VIC1(23)
+#define IRQ_OTG			S5P_IRQ_VIC1(24)
+#define IRQ_MSM			S5P_IRQ_VIC1(25)
+#define IRQ_HSMMC0		S5P_IRQ_VIC1(26)
+#define IRQ_HSMMC1		S5P_IRQ_VIC1(27)
+#define IRQ_HSMMC2		S5P_IRQ_VIC1(28)
+#define IRQ_MIPICSI		S5P_IRQ_VIC1(29)
+#define IRQ_MIPIDSI		S5P_IRQ_VIC1(30)
+#define IRQ_ONENAND_AUDI	S5P_IRQ_VIC1(31)
+
+/* VIC2: Multimedia, Audio, Security */
+
+#define IRQ_LCD0		S5P_IRQ_VIC2(0)
+#define IRQ_LCD1		S5P_IRQ_VIC2(1)
+#define IRQ_LCD2		S5P_IRQ_VIC2(2)
+#define IRQ_LCD3		S5P_IRQ_VIC2(3)
+#define IRQ_ROTATOR		S5P_IRQ_VIC2(4)
+#define IRQ_FIMC0		S5P_IRQ_VIC2(5)
+#define IRQ_FIMC1		S5P_IRQ_VIC2(6)
+#define IRQ_FIMC2		S5P_IRQ_VIC2(7)
+#define IRQ_JPEG		S5P_IRQ_VIC2(8)
+#define IRQ_2D			S5P_IRQ_VIC2(9)
+#define IRQ_3D			S5P_IRQ_VIC2(10)
+#define IRQ_MIXER		S5P_IRQ_VIC2(11)
+#define IRQ_HDMI		S5P_IRQ_VIC2(12)
+#define IRQ_IIC1		S5P_IRQ_VIC2(13)
+#define IRQ_MFC			S5P_IRQ_VIC2(14)
+#define IRQ_TVENC		S5P_IRQ_VIC2(15)
+#define IRQ_I2S0		S5P_IRQ_VIC2(16)
+#define IRQ_I2S1		S5P_IRQ_VIC2(17)
+#define IRQ_I2S2		S5P_IRQ_VIC2(18)
+#define IRQ_AC97		S5P_IRQ_VIC2(19)
+#define IRQ_PCM0		S5P_IRQ_VIC2(20)
+#define IRQ_PCM1		S5P_IRQ_VIC2(21)
+#define IRQ_SPDIF		S5P_IRQ_VIC2(22)
+#define IRQ_ADC			S5P_IRQ_VIC2(23)
+#define IRQ_PENDN		S5P_IRQ_VIC2(24)
+#define IRQ_TC			IRQ_PENDN
+#define IRQ_KEYPAD		S5P_IRQ_VIC2(25)
+#define IRQ_CG			S5P_IRQ_VIC2(26)
+#define IRQ_SEC			S5P_IRQ_VIC2(27)
+#define IRQ_SECRX		S5P_IRQ_VIC2(28)
+#define IRQ_SECTX		S5P_IRQ_VIC2(29)
+#define IRQ_SDMIRQ		S5P_IRQ_VIC2(30)
+#define IRQ_SDMFIQ		S5P_IRQ_VIC2(31)
+
+/* VIC3: Etc */
+
+#define IRQ_IPC			S5P_IRQ_VIC3(0)
+#define IRQ_HOSTIF		S5P_IRQ_VIC3(1)
+#define IRQ_MMC3		S5P_IRQ_VIC3(2)
+#define IRQ_CEC			S5P_IRQ_VIC3(3)
+#define IRQ_TSI			S5P_IRQ_VIC3(4)
+#define IRQ_MDNIE0		S5P_IRQ_VIC3(5)
+#define IRQ_MDNIE1		S5P_IRQ_VIC3(6)
+#define IRQ_MDNIE2		S5P_IRQ_VIC3(7)
+#define IRQ_MDNIE3		S5P_IRQ_VIC3(8)
+#define IRQ_VIC_END		S5P_IRQ_VIC3(31)
+
+#define S5P_IRQ_EINT_BASE	(IRQ_VIC_END + 1)
+
+#define S5P_EINT(x)		((x) + S5P_IRQ_EINT_BASE)
+#define IRQ_EINT(x)		S5P_EINT(x)
+
+/* Set the default NR_IRQS */
+
+#define NR_IRQS 		(IRQ_EINT(31) + 1)
+
+#endif /* ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h
new file mode 100644
index 000000000000..c22694c8231f
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/map.h
@@ -0,0 +1,65 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/map.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV210 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H __FILE__
+
+#include <plat/map-base.h>
+#include <plat/map-s5p.h>
+
+#define S5PV210_PA_CHIPID	(0xE0000000)
+#define S5P_PA_CHIPID		S5PV210_PA_CHIPID
+
+#define S5PV210_PA_SYSCON	(0xE0100000)
+#define S5P_PA_SYSCON		S5PV210_PA_SYSCON
+
+#define S5PV210_PA_GPIO		(0xE0200000)
+#define S5P_PA_GPIO		S5PV210_PA_GPIO
+
+#define S5PV210_PA_IIC0		(0xE1800000)
+
+#define S5PV210_PA_TIMER	(0xE2500000)
+#define S5P_PA_TIMER		S5PV210_PA_TIMER
+
+#define S5PV210_PA_SYSTIMER	(0xE2600000)
+
+#define S5PV210_PA_UART		(0xE2900000)
+
+#define S5P_PA_UART0		(S5PV210_PA_UART + 0x0)
+#define S5P_PA_UART1		(S5PV210_PA_UART + 0x400)
+#define S5P_PA_UART2		(S5PV210_PA_UART + 0x800)
+#define S5P_PA_UART3		(S5PV210_PA_UART + 0xC00)
+
+#define S5P_SZ_UART		SZ_256
+
+#define S5PV210_PA_SROMC	(0xE8000000)
+
+#define S5PV210_PA_VIC0		(0xF2000000)
+#define S5P_PA_VIC0		S5PV210_PA_VIC0
+
+#define S5PV210_PA_VIC1		(0xF2100000)
+#define S5P_PA_VIC1		S5PV210_PA_VIC1
+
+#define S5PV210_PA_VIC2		(0xF2200000)
+#define S5P_PA_VIC2		S5PV210_PA_VIC2
+
+#define S5PV210_PA_VIC3		(0xF2300000)
+#define S5P_PA_VIC3		S5PV210_PA_VIC3
+
+#define S5PV210_PA_SDRAM	(0x20000000)
+#define S5P_PA_SDRAM		S5PV210_PA_SDRAM
+
+/* compatibiltiy defines. */
+#define S3C_PA_UART		S5PV210_PA_UART
+#define S3C_PA_IIC		S5PV210_PA_IIC0
+
+#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/memory.h b/arch/arm/mach-s5pv210/include/mach/memory.h
new file mode 100644
index 000000000000..379117e27600
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/memory.h
@@ -0,0 +1,23 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/memory.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV210 - Memory definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET		UL(0x20000000)
+#define CONSISTENT_DMA_SIZE	(SZ_8M + SZ_4M + SZ_2M)
+
+/* Maximum of 256MiB in one bank */
+#define MAX_PHYSMEM_BITS	32
+#define SECTION_SIZE_BITS	28
+
+#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/pwm-clock.h b/arch/arm/mach-s5pv210/include/mach/pwm-clock.h
new file mode 100644
index 000000000000..69027fea987a
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/pwm-clock.h
@@ -0,0 +1,69 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/pwm-clock.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Based on arch/arm/plat-s3c24xx/include/mach/pwm-clock.h
+ *
+ * S5PV210 - pwm clock and timer support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_PWMCLK_H
+#define __ASM_ARCH_PWMCLK_H __FILE__
+
+/**
+ * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
+ * @cfg: The timer TCFG1 register bits shifted down to 0.
+ *
+ * Return true if the given configuration from TCFG1 is a TCLK instead
+ * any of the TDIV clocks.
+ */
+static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
+{
+	return tcfg == S3C2410_TCFG1_MUX_TCLK;
+}
+
+/**
+ * tcfg_to_divisor() - convert tcfg1 setting to a divisor
+ * @tcfg1: The tcfg1 setting, shifted down.
+ *
+ * Get the divisor value for the given tcfg1 setting. We assume the
+ * caller has already checked to see if this is not a TCLK source.
+ */
+static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
+{
+	return 1 << (1 + tcfg1);
+}
+
+/**
+ * pwm_tdiv_has_div1() - does the tdiv setting have a /1
+ *
+ * Return true if we have a /1 in the tdiv setting.
+ */
+static inline unsigned int pwm_tdiv_has_div1(void)
+{
+	return 0;
+}
+
+/**
+ * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
+ * @div: The divisor to calculate the bit information for.
+ *
+ * Turn a divisor into the necessary bit field for TCFG1.
+ */
+static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
+{
+	return ilog2(div) - 1;
+}
+
+#define S3C_TCFG1_MUX_TCLK S3C2410_TCFG1_MUX_TCLK
+
+#endif /* __ASM_ARCH_PWMCLK_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-clock.h b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
new file mode 100644
index 000000000000..e56e0e4673ed
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
@@ -0,0 +1,169 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/regs-clock.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV210 - Clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_CLOCK_H
+#define __ASM_ARCH_REGS_CLOCK_H __FILE__
+
+#include <mach/map.h>
+
+#define S5P_CLKREG(x)		(S3C_VA_SYS + (x))
+
+#define S5P_APLL_LOCK		S5P_CLKREG(0x00)
+#define S5P_MPLL_LOCK		S5P_CLKREG(0x08)
+#define S5P_EPLL_LOCK		S5P_CLKREG(0x10)
+#define S5P_VPLL_LOCK		S5P_CLKREG(0x20)
+
+#define S5P_APLL_CON		S5P_CLKREG(0x100)
+#define S5P_MPLL_CON		S5P_CLKREG(0x108)
+#define S5P_EPLL_CON		S5P_CLKREG(0x110)
+#define S5P_VPLL_CON		S5P_CLKREG(0x120)
+
+#define S5P_CLK_SRC0		S5P_CLKREG(0x200)
+#define S5P_CLK_SRC1		S5P_CLKREG(0x204)
+#define S5P_CLK_SRC2		S5P_CLKREG(0x208)
+#define S5P_CLK_SRC3		S5P_CLKREG(0x20C)
+#define S5P_CLK_SRC4		S5P_CLKREG(0x210)
+#define S5P_CLK_SRC5		S5P_CLKREG(0x214)
+#define S5P_CLK_SRC6		S5P_CLKREG(0x218)
+
+#define S5P_CLK_SRC_MASK0	S5P_CLKREG(0x280)
+#define S5P_CLK_SRC_MASK1	S5P_CLKREG(0x284)
+
+#define S5P_CLK_DIV0		S5P_CLKREG(0x300)
+#define S5P_CLK_DIV1		S5P_CLKREG(0x304)
+#define S5P_CLK_DIV2		S5P_CLKREG(0x308)
+#define S5P_CLK_DIV3		S5P_CLKREG(0x30C)
+#define S5P_CLK_DIV4		S5P_CLKREG(0x310)
+#define S5P_CLK_DIV5		S5P_CLKREG(0x314)
+#define S5P_CLK_DIV6		S5P_CLKREG(0x318)
+#define S5P_CLK_DIV7		S5P_CLKREG(0x31C)
+
+#define S5P_CLKGATE_MAIN0	S5P_CLKREG(0x400)
+#define S5P_CLKGATE_MAIN1	S5P_CLKREG(0x404)
+#define S5P_CLKGATE_MAIN2	S5P_CLKREG(0x408)
+
+#define S5P_CLKGATE_PERI0	S5P_CLKREG(0x420)
+#define S5P_CLKGATE_PERI1	S5P_CLKREG(0x424)
+
+#define S5P_CLKGATE_SCLK0	S5P_CLKREG(0x440)
+#define S5P_CLKGATE_SCLK1	S5P_CLKREG(0x444)
+#define S5P_CLKGATE_IP0		S5P_CLKREG(0x460)
+#define S5P_CLKGATE_IP1		S5P_CLKREG(0x464)
+#define S5P_CLKGATE_IP2		S5P_CLKREG(0x468)
+#define S5P_CLKGATE_IP3		S5P_CLKREG(0x46C)
+#define S5P_CLKGATE_IP4		S5P_CLKREG(0x470)
+
+#define S5P_CLKGATE_BLOCK	S5P_CLKREG(0x480)
+#define S5P_CLKGATE_BUS0	S5P_CLKREG(0x484)
+#define S5P_CLKGATE_BUS1	S5P_CLKREG(0x488)
+#define S5P_CLK_OUT		S5P_CLKREG(0x500)
+
+/* CLKSRC0 */
+#define S5P_CLKSRC0_MUX200_MASK		(0x1<<16)
+#define S5P_CLKSRC0_MUX166_MASK		(0x1<<20)
+#define S5P_CLKSRC0_MUX133_MASK		(0x1<<24)
+
+/* CLKDIV0 */
+#define S5P_CLKDIV0_APLL_SHIFT		(0)
+#define S5P_CLKDIV0_APLL_MASK		(0x7 << S5P_CLKDIV0_APLL_SHIFT)
+#define S5P_CLKDIV0_A2M_SHIFT		(4)
+#define S5P_CLKDIV0_A2M_MASK		(0x7 << S5P_CLKDIV0_A2M_SHIFT)
+#define S5P_CLKDIV0_HCLK200_SHIFT	(8)
+#define S5P_CLKDIV0_HCLK200_MASK	(0x7 << S5P_CLKDIV0_HCLK200_SHIFT)
+#define S5P_CLKDIV0_PCLK100_SHIFT	(12)
+#define S5P_CLKDIV0_PCLK100_MASK	(0x7 << S5P_CLKDIV0_PCLK100_SHIFT)
+#define S5P_CLKDIV0_HCLK166_SHIFT	(16)
+#define S5P_CLKDIV0_HCLK166_MASK	(0xF << S5P_CLKDIV0_HCLK166_SHIFT)
+#define S5P_CLKDIV0_PCLK83_SHIFT	(20)
+#define S5P_CLKDIV0_PCLK83_MASK		(0x7 << S5P_CLKDIV0_PCLK83_SHIFT)
+#define S5P_CLKDIV0_HCLK133_SHIFT	(24)
+#define S5P_CLKDIV0_HCLK133_MASK	(0xF << S5P_CLKDIV0_HCLK133_SHIFT)
+#define S5P_CLKDIV0_PCLK66_SHIFT	(28)
+#define S5P_CLKDIV0_PCLK66_MASK		(0x7 << S5P_CLKDIV0_PCLK66_SHIFT)
+
+/* Registers related to power management */
+#define S5P_PWR_CFG		S5P_CLKREG(0xC000)
+#define S5P_EINT_WAKEUP_MASK	S5P_CLKREG(0xC004)
+#define S5P_WAKEUP_MASK 	S5P_CLKREG(0xC008)
+#define S5P_PWR_MODE		S5P_CLKREG(0xC00C)
+#define S5P_NORMAL_CFG		S5P_CLKREG(0xC010)
+#define S5P_IDLE_CFG		S5P_CLKREG(0xC020)
+#define S5P_STOP_CFG		S5P_CLKREG(0xC030)
+#define S5P_STOP_MEM_CFG	S5P_CLKREG(0xC034)
+#define S5P_SLEEP_CFG		S5P_CLKREG(0xC040)
+
+#define S5P_OSC_FREQ		S5P_CLKREG(0xC100)
+#define S5P_OSC_STABLE		S5P_CLKREG(0xC104)
+#define S5P_PWR_STABLE		S5P_CLKREG(0xC108)
+#define S5P_MTC_STABLE		S5P_CLKREG(0xC110)
+#define S5P_CLAMP_STABLE	S5P_CLKREG(0xC114)
+
+#define S5P_WAKEUP_STAT		S5P_CLKREG(0xC200)
+#define S5P_BLK_PWR_STAT	S5P_CLKREG(0xC204)
+
+#define S5P_OTHERS		S5P_CLKREG(0xE000)
+#define S5P_OM_STAT		S5P_CLKREG(0xE100)
+#define S5P_USB_PHY_CONTROL	S5P_CLKREG(0xE80C)
+#define S5P_DAC_CONTROL		S5P_CLKREG(0xE810)
+
+#define S5P_INFORM0		S5P_CLKREG(0xF000)
+#define S5P_INFORM1		S5P_CLKREG(0xF004)
+#define S5P_INFORM2		S5P_CLKREG(0xF008)
+#define S5P_INFORM3		S5P_CLKREG(0xF00C)
+#define S5P_INFORM4		S5P_CLKREG(0xF010)
+#define S5P_INFORM5		S5P_CLKREG(0xF014)
+#define S5P_INFORM6		S5P_CLKREG(0xF018)
+#define S5P_INFORM7		S5P_CLKREG(0xF01C)
+
+#define S5P_RST_STAT		S5P_CLKREG(0xA000)
+#define S5P_OSC_CON		S5P_CLKREG(0x8000)
+#define S5P_MIPI_PHY_CON0	S5P_CLKREG(0x7200)
+#define S5P_MIPI_PHY_CON1	S5P_CLKREG(0x7204)
+#define S5P_MIPI_CONTROL	S5P_CLKREG(0xE814)
+
+#define S5P_IDLE_CFG_TL_MASK	(3 << 30)
+#define S5P_IDLE_CFG_TM_MASK	(3 << 28)
+#define S5P_IDLE_CFG_TL_ON	(2 << 30)
+#define S5P_IDLE_CFG_TM_ON	(2 << 28)
+#define S5P_IDLE_CFG_DIDLE	(1 << 0)
+
+#define S5P_CFG_WFI_CLEAN		(~(3 << 8))
+#define S5P_CFG_WFI_IDLE		(1 << 8)
+#define S5P_CFG_WFI_STOP		(2 << 8)
+#define S5P_CFG_WFI_SLEEP		(3 << 8)
+
+#define S5P_OTHER_SYS_INT		24
+#define S5P_OTHER_STA_TYPE		23
+#define S5P_OTHER_SYSC_INTOFF		(1 << 0)
+#define STA_TYPE_EXPON			0
+#define STA_TYPE_SFR			1
+
+#define S5P_PWR_STA_EXP_SCALE		0
+#define S5P_PWR_STA_CNT			4
+
+#define S5P_PWR_STABLE_COUNT		85500
+
+#define S5P_SLEEP_CFG_OSC_EN		(1 << 0)
+#define S5P_SLEEP_CFG_USBOSC_EN		(1 << 1)
+
+/* OTHERS Resgister */
+#define S5P_OTHERS_USB_SIG_MASK		(1 << 16)
+#define S5P_OTHERS_MIPI_DPHY_EN		(1 << 28)
+
+/* MIPI */
+#define S5P_MIPI_DPHY_EN		(3)
+
+/* S5P_DAC_CONTROL */
+#define S5P_DAC_ENABLE			(1)
+#define S5P_DAC_DISABLE			(0)
+
+#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-irq.h b/arch/arm/mach-s5pv210/include/mach/regs-irq.h
new file mode 100644
index 000000000000..5c3b104a7c86
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/regs-irq.h
@@ -0,0 +1,19 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/regs-irq.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV210 - IRQ register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_IRQ_H
+#define __ASM_ARCH_REGS_IRQ_H __FILE__
+
+#include <asm/hardware/vic.h>
+#include <mach/map.h>
+
+#endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/system.h b/arch/arm/mach-s5pv210/include/mach/system.h
new file mode 100644
index 000000000000..1ca04d5025b3
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/system.h
@@ -0,0 +1,26 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/system.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV210 - system support header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H __FILE__
+
+static void arch_idle(void)
+{
+	/* nothing here yet */
+}
+
+static void arch_reset(char mode, const char *cmd)
+{
+	/* nothing here yet */
+}
+
+#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/tick.h b/arch/arm/mach-s5pv210/include/mach/tick.h
new file mode 100644
index 000000000000..7993b3603ccf
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/tick.h
@@ -0,0 +1,26 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/tick.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Based on arch/arm/mach-s3c6400/include/mach/tick.h
+ *
+ * S5PV210 - Timer tick support definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TICK_H
+#define __ASM_ARCH_TICK_H __FILE__
+
+static inline u32 s3c24xx_ostimer_pending(void)
+{
+	u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
+	return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0)));
+}
+
+#define TICK_MAX	(0xffffffff)
+
+#endif /* __ASM_ARCH_TICK_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/timex.h b/arch/arm/mach-s5pv210/include/mach/timex.h
new file mode 100644
index 000000000000..73dc85496a83
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/timex.h
@@ -0,0 +1,29 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/timex.h
+ *
+ * Copyright (c) 2003-2010 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Based on arch/arm/mach-s5p6442/include/mach/timex.h
+ *
+ * S5PV210 - time parameters
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H __FILE__
+
+/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
+ * a variable is useless. It seems as long as we make our timers an
+ * exact multiple of HZ, any value that makes a 1->1 correspondence
+ * for the time conversion functions to/from jiffies is acceptable.
+*/
+
+#define CLOCK_TICK_RATE 12000000
+
+#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/uncompress.h b/arch/arm/mach-s5pv210/include/mach/uncompress.h
new file mode 100644
index 000000000000..08ff2fda1fb9
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/uncompress.h
@@ -0,0 +1,24 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/uncompress.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV210 - uncompress code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/map.h>
+#include <plat/uncompress.h>
+
+static void arch_detect_cpu(void)
+{
+	/* we do not need to do any cpu detection here at the moment. */
+}
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/vmalloc.h b/arch/arm/mach-s5pv210/include/mach/vmalloc.h
new file mode 100644
index 000000000000..58f515e0747e
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/vmalloc.h
@@ -0,0 +1,22 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/vmalloc.h
+ *
+ * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Based on arch/arm/mach-s5p6442/include/mach/vmalloc.h
+ *
+ * S5PV210 vmalloc definition
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H __FILE__
+
+#define VMALLOC_END	  (0xE0000000)
+
+#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s5pv210/init.c b/arch/arm/mach-s5pv210/init.c
new file mode 100644
index 000000000000..4865ae2c475a
--- /dev/null
+++ b/arch/arm/mach-s5pv210/init.c
@@ -0,0 +1,44 @@
+/* linux/arch/arm/mach-s5pv210/init.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/s5pv210.h>
+#include <plat/regs-serial.h>
+
+static struct s3c24xx_uart_clksrc s5pv210_serial_clocks[] = {
+	[0] = {
+		.name		= "pclk",
+		.divisor	= 1,
+		.min_baud	= 0,
+		.max_baud	= 0,
+	},
+};
+
+/* uart registration process */
+void __init s5pv210_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	struct s3c2410_uartcfg *tcfg = cfg;
+	u32 ucnt;
+
+	for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
+		if (!tcfg->clocks) {
+			tcfg->clocks = s5pv210_serial_clocks;
+			tcfg->clocks_size = ARRAY_SIZE(s5pv210_serial_clocks);
+		}
+	}
+
+	s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no);
+}
diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c
new file mode 100644
index 000000000000..ab4869df30c0
--- /dev/null
+++ b/arch/arm/mach-s5pv210/mach-smdkc110.c
@@ -0,0 +1,98 @@
+/* linux/arch/arm/mach-s5pv210/mach-smdkc110.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+#include <plat/regs-serial.h>
+#include <plat/s5pv210.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define S5PV210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+				 S3C2410_UCON_RXILEVEL |	\
+				 S3C2410_UCON_TXIRQMODE |	\
+				 S3C2410_UCON_RXIRQMODE |	\
+				 S3C2410_UCON_RXFIFO_TOI |	\
+				 S3C2443_UCON_RXERR_IRQEN)
+
+#define S5PV210_ULCON_DEFAULT	S3C2410_LCON_CS8
+
+#define S5PV210_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+				 S5PV210_UFCON_TXTRIG4 |	\
+				 S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport		= 0,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+	[1] = {
+		.hwport		= 1,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+	[2] = {
+		.hwport		= 2,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+	[3] = {
+		.hwport		= 3,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+};
+
+static struct platform_device *smdkc110_devices[] __initdata = {
+};
+
+static void __init smdkc110_map_io(void)
+{
+	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	s3c24xx_init_clocks(24000000);
+	s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
+}
+
+static void __init smdkc110_machine_init(void)
+{
+	platform_add_devices(smdkc110_devices, ARRAY_SIZE(smdkc110_devices));
+}
+
+MACHINE_START(SMDKC110, "SMDKC110")
+	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.init_irq	= s5pv210_init_irq,
+	.map_io		= smdkc110_map_io,
+	.init_machine	= smdkc110_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
new file mode 100644
index 000000000000..a27883253204
--- /dev/null
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -0,0 +1,98 @@
+/* linux/arch/arm/mach-s5pv210/mach-smdkv210.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+#include <plat/regs-serial.h>
+#include <plat/s5pv210.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define S5PV210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+				 S3C2410_UCON_RXILEVEL |	\
+				 S3C2410_UCON_TXIRQMODE |	\
+				 S3C2410_UCON_RXIRQMODE |	\
+				 S3C2410_UCON_RXFIFO_TOI |	\
+				 S3C2443_UCON_RXERR_IRQEN)
+
+#define S5PV210_ULCON_DEFAULT	S3C2410_LCON_CS8
+
+#define S5PV210_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+				 S5PV210_UFCON_TXTRIG4 |	\
+				 S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport		= 0,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+	[1] = {
+		.hwport		= 1,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+	[2] = {
+		.hwport		= 2,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+	[3] = {
+		.hwport		= 3,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+};
+
+static struct platform_device *smdkv210_devices[] __initdata = {
+};
+
+static void __init smdkv210_map_io(void)
+{
+	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	s3c24xx_init_clocks(24000000);
+	s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
+}
+
+static void __init smdkv210_machine_init(void)
+{
+	platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices));
+}
+
+MACHINE_START(SMDKV210, "SMDKV210")
+	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.init_irq	= s5pv210_init_irq,
+	.map_io		= smdkv210_map_io,
+	.init_machine	= smdkv210_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index 051ec0f0023c..259cb2c15fff 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -51,6 +51,10 @@ static struct resource sa1111_resources[] = {
 	},
 };
 
+static struct sa1111_platform_data sa1111_info = {
+	.irq_base	= IRQ_BOARD_END,
+};
+
 static u64 sa1111_dmamask = 0xffffffffUL;
 
 static struct platform_device sa1111_device = {
@@ -59,6 +63,7 @@ static struct platform_device sa1111_device = {
 	.dev		= {
 		.dma_mask = &sa1111_dmamask,
 		.coherent_dma_mask = 0xffffffff,
+		.platform_data = &sa1111_info,
 	},
 	.num_resources	= ARRAY_SIZE(sa1111_resources),
 	.resource	= sa1111_resources,
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index 9982c5c28edf..5d5f330c5d94 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -234,6 +234,10 @@ static struct resource locomo_resources[] = {
 	},
 };
 
+static struct locomo_platform_data locomo_info = {
+	.irq_base	= IRQ_BOARD_START,
+};
+
 struct platform_device collie_locomo_device = {
 	.name		= "locomo",
 	.id		= 0,
diff --git a/arch/arm/mach-sa1100/include/mach/collie.h b/arch/arm/mach-sa1100/include/mach/collie.h
index 71a0b3fdcc8c..52acda7061b7 100644
--- a/arch/arm/mach-sa1100/include/mach/collie.h
+++ b/arch/arm/mach-sa1100/include/mach/collie.h
@@ -72,13 +72,6 @@
 #define COLLIE_IRQ_GPIO_GA_INT		IRQ_GPIO25
 #define COLLIE_IRQ_GPIO_MAIN_BAT_LOW	IRQ_GPIO26
 
-#define COLLIE_LCM_IRQ_GPIO_RTS		IRQ_LOCOMO_GPIO0
-#define COLLIE_LCM_IRQ_GPIO_CTS		IRQ_LOCOMO_GPIO1
-#define COLLIE_LCM_IRQ_GPIO_DSR		IRQ_LOCOMO_GPIO2
-#define COLLIE_LCM_IRQ_GPIO_DTR		IRQ_LOCOMO_GPIO3
-#define COLLIE_LCM_IRQ_GPIO_nSD_DETECT	IRQ_LOCOMO_GPIO13
-#define COLLIE_LCM_IRQ_GPIO_nSD_WP	IRQ_LOCOMO_GPIO14
-
 /* GPIO's on the TC35143AF (Toshiba Analog Frontend) */
 #define COLLIE_TC35143_GPIO_BASE	(GPIO_MAX + 13)
 #define COLLIE_TC35143_GPIO_VERSION0    UCB_IO_0
diff --git a/arch/arm/mach-sa1100/include/mach/irqs.h b/arch/arm/mach-sa1100/include/mach/irqs.h
index ae81f80b0cf9..8c8845b5ae5b 100644
--- a/arch/arm/mach-sa1100/include/mach/irqs.h
+++ b/arch/arm/mach-sa1100/include/mach/irqs.h
@@ -68,93 +68,17 @@
 #define IRQ_BOARD_START		49
 #define IRQ_BOARD_END		65
 
-#define IRQ_SA1111_START	(IRQ_BOARD_END)
-#define IRQ_GPAIN0		(IRQ_BOARD_END + 0)
-#define IRQ_GPAIN1		(IRQ_BOARD_END + 1)
-#define IRQ_GPAIN2		(IRQ_BOARD_END + 2)
-#define IRQ_GPAIN3		(IRQ_BOARD_END + 3)
-#define IRQ_GPBIN0		(IRQ_BOARD_END + 4)
-#define IRQ_GPBIN1		(IRQ_BOARD_END + 5)
-#define IRQ_GPBIN2		(IRQ_BOARD_END + 6)
-#define IRQ_GPBIN3		(IRQ_BOARD_END + 7)
-#define IRQ_GPBIN4		(IRQ_BOARD_END + 8)
-#define IRQ_GPBIN5		(IRQ_BOARD_END + 9)
-#define IRQ_GPCIN0		(IRQ_BOARD_END + 10)
-#define IRQ_GPCIN1		(IRQ_BOARD_END + 11)
-#define IRQ_GPCIN2		(IRQ_BOARD_END + 12)
-#define IRQ_GPCIN3		(IRQ_BOARD_END + 13)
-#define IRQ_GPCIN4		(IRQ_BOARD_END + 14)
-#define IRQ_GPCIN5		(IRQ_BOARD_END + 15)
-#define IRQ_GPCIN6		(IRQ_BOARD_END + 16)
-#define IRQ_GPCIN7		(IRQ_BOARD_END + 17)
-#define IRQ_MSTXINT		(IRQ_BOARD_END + 18)
-#define IRQ_MSRXINT		(IRQ_BOARD_END + 19)
-#define IRQ_MSSTOPERRINT	(IRQ_BOARD_END + 20)
-#define IRQ_TPTXINT		(IRQ_BOARD_END + 21)
-#define IRQ_TPRXINT		(IRQ_BOARD_END + 22)
-#define IRQ_TPSTOPERRINT	(IRQ_BOARD_END + 23)
-#define SSPXMTINT		(IRQ_BOARD_END + 24)
-#define SSPRCVINT		(IRQ_BOARD_END + 25)
-#define SSPROR			(IRQ_BOARD_END + 26)
-#define AUDXMTDMADONEA		(IRQ_BOARD_END + 32)
-#define AUDRCVDMADONEA		(IRQ_BOARD_END + 33)
-#define AUDXMTDMADONEB		(IRQ_BOARD_END + 34)
-#define AUDRCVDMADONEB		(IRQ_BOARD_END + 35)
-#define AUDTFSR			(IRQ_BOARD_END + 36)
-#define AUDRFSR			(IRQ_BOARD_END + 37)
-#define AUDTUR			(IRQ_BOARD_END + 38)
-#define AUDROR			(IRQ_BOARD_END + 39)
-#define AUDDTS			(IRQ_BOARD_END + 40)
-#define AUDRDD			(IRQ_BOARD_END + 41)
-#define AUDSTO			(IRQ_BOARD_END + 42)
-#define IRQ_USBPWR		(IRQ_BOARD_END + 43)
-#define IRQ_HCIM		(IRQ_BOARD_END + 44)
-#define IRQ_HCIBUFFACC		(IRQ_BOARD_END + 45)
-#define IRQ_HCIRMTWKP		(IRQ_BOARD_END + 46)
-#define IRQ_NHCIMFCIR		(IRQ_BOARD_END + 47)
-#define IRQ_USB_PORT_RESUME	(IRQ_BOARD_END + 48)
-#define IRQ_S0_READY_NINT	(IRQ_BOARD_END + 49)
-#define IRQ_S1_READY_NINT	(IRQ_BOARD_END + 50)
-#define IRQ_S0_CD_VALID		(IRQ_BOARD_END + 51)
-#define IRQ_S1_CD_VALID		(IRQ_BOARD_END + 52)
-#define IRQ_S0_BVD1_STSCHG	(IRQ_BOARD_END + 53)
-#define IRQ_S1_BVD1_STSCHG	(IRQ_BOARD_END + 54)
-
-#define IRQ_LOCOMO_START	(IRQ_BOARD_END)
-#define IRQ_LOCOMO_KEY		(IRQ_BOARD_END + 0)
-#define IRQ_LOCOMO_GPIO0	(IRQ_BOARD_END + 1)
-#define IRQ_LOCOMO_GPIO1	(IRQ_BOARD_END + 2)
-#define IRQ_LOCOMO_GPIO2	(IRQ_BOARD_END + 3)
-#define IRQ_LOCOMO_GPIO3	(IRQ_BOARD_END + 4)
-#define IRQ_LOCOMO_GPIO4	(IRQ_BOARD_END + 5)
-#define IRQ_LOCOMO_GPIO5	(IRQ_BOARD_END + 6)
-#define IRQ_LOCOMO_GPIO6	(IRQ_BOARD_END + 7)
-#define IRQ_LOCOMO_GPIO7	(IRQ_BOARD_END + 8)
-#define IRQ_LOCOMO_GPIO8	(IRQ_BOARD_END + 9)
-#define IRQ_LOCOMO_GPIO9	(IRQ_BOARD_END + 10)
-#define IRQ_LOCOMO_GPIO10	(IRQ_BOARD_END + 11)
-#define IRQ_LOCOMO_GPIO11	(IRQ_BOARD_END + 12)
-#define IRQ_LOCOMO_GPIO12	(IRQ_BOARD_END + 13)
-#define IRQ_LOCOMO_GPIO13	(IRQ_BOARD_END + 14)
-#define IRQ_LOCOMO_GPIO14	(IRQ_BOARD_END + 15)
-#define IRQ_LOCOMO_GPIO15	(IRQ_BOARD_END + 16)
-#define IRQ_LOCOMO_LT		(IRQ_BOARD_END + 17)
-#define IRQ_LOCOMO_SPI_RFR	(IRQ_BOARD_END + 18)
-#define IRQ_LOCOMO_SPI_RFW	(IRQ_BOARD_END + 19)
-#define IRQ_LOCOMO_SPI_REND	(IRQ_BOARD_END + 20)
-#define IRQ_LOCOMO_SPI_TEND	(IRQ_BOARD_END + 21)
-
 /*
  * Figure out the MAX IRQ number.
  *
  * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1.
- * If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1
+ * If we have an LoCoMo, the max IRQ is IRQ_BOARD_START + 4
  * Otherwise, we have the standard IRQs only.
  */
 #ifdef CONFIG_SA1111
-#define NR_IRQS			(IRQ_S1_BVD1_STSCHG + 1)
-#elif defined(CONFIG_SHARP_LOCOMO)
-#define NR_IRQS			(IRQ_LOCOMO_SPI_TEND + 1)
+#define NR_IRQS			(IRQ_BOARD_END + 55)
+#elif defined(CONFIG_SHARPSL_LOCOMO)
+#define NR_IRQS			(IRQ_BOARD_START + 4)
 #else
 #define NR_IRQS			(IRQ_BOARD_START)
 #endif
@@ -166,10 +90,3 @@
 #define IRQ_NEPONSET_SMC9196	(IRQ_BOARD_START + 0)
 #define IRQ_NEPONSET_USAR	(IRQ_BOARD_START + 1)
 #define IRQ_NEPONSET_SA1111	(IRQ_BOARD_START + 2)
-
-/* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */
-#define IRQ_LOCOMO_KEY_BASE	(IRQ_BOARD_START + 0)
-#define IRQ_LOCOMO_GPIO_BASE	(IRQ_BOARD_START + 1)
-#define IRQ_LOCOMO_LT_BASE	(IRQ_BOARD_START + 2)
-#define IRQ_LOCOMO_SPI_BASE	(IRQ_BOARD_START + 3)
-
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index 13ebd2d99bfd..d3ec620618f1 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -208,6 +208,10 @@ static struct resource sa1111_resources[] = {
 	},
 };
 
+static struct sa1111_platform_data sa1111_info = {
+	.irq_base	= IRQ_BOARD_END,
+};
+
 static u64 sa1111_dmamask = 0xffffffffUL;
 
 static struct platform_device sa1111_device = {
@@ -216,6 +220,7 @@ static struct platform_device sa1111_device = {
 	.dev		= {
 		.dma_mask = &sa1111_dmamask,
 		.coherent_dma_mask = 0xffffffff,
+		.platform_data = &sa1111_info,
 	},
 	.num_resources	= ARRAY_SIZE(sa1111_resources),
 	.resource	= sa1111_resources,
diff --git a/arch/arm/mach-sa1100/jornada720_ssp.c b/arch/arm/mach-sa1100/jornada720_ssp.c
index 506a5e5a9ad5..9b6dee5d16db 100644
--- a/arch/arm/mach-sa1100/jornada720_ssp.c
+++ b/arch/arm/mach-sa1100/jornada720_ssp.c
@@ -130,7 +130,7 @@ void jornada_ssp_end(void)
 };
 EXPORT_SYMBOL(jornada_ssp_end);
 
-static int __init jornada_ssp_probe(struct platform_device *dev)
+static int __devinit jornada_ssp_probe(struct platform_device *dev)
 {
 	int ret;
 
diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c
index 6ccd175bc4cf..0b505d9f22d6 100644
--- a/arch/arm/mach-sa1100/neponset.c
+++ b/arch/arm/mach-sa1100/neponset.c
@@ -241,6 +241,10 @@ static struct resource sa1111_resources[] = {
 	},
 };
 
+static struct sa1111_platform_data sa1111_info = {
+	.irq_base	= IRQ_BOARD_END,
+};
+
 static u64 sa1111_dmamask = 0xffffffffUL;
 
 static struct platform_device sa1111_device = {
@@ -249,6 +253,7 @@ static struct platform_device sa1111_device = {
 	.dev		= {
 		.dma_mask = &sa1111_dmamask,
 		.coherent_dma_mask = 0xffffffff,
+		.platform_data = &sa1111_info,
 	},
 	.num_resources	= ARRAY_SIZE(sa1111_resources),
 	.resource	= sa1111_resources,
diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c
index b9cbb56d6e9d..74b6e0e570b6 100644
--- a/arch/arm/mach-sa1100/time.c
+++ b/arch/arm/mach-sa1100/time.c
@@ -35,14 +35,12 @@ static irqreturn_t sa1100_ost0_interrupt(int irq, void *dev_id)
 static int
 sa1100_osmr0_set_next_event(unsigned long delta, struct clock_event_device *c)
 {
-	unsigned long flags, next, oscr;
+	unsigned long next, oscr;
 
-	raw_local_irq_save(flags);
 	OIER |= OIER_E0;
 	next = OSCR + delta;
 	OSMR0 = next;
 	oscr = OSCR;
-	raw_local_irq_restore(flags);
 
 	return (signed)(next - oscr) <= MIN_OSCR_DELTA ? -ETIME : 0;
 }
@@ -50,16 +48,12 @@ sa1100_osmr0_set_next_event(unsigned long delta, struct clock_event_device *c)
 static void
 sa1100_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *c)
 {
-	unsigned long flags;
-
 	switch (mode) {
 	case CLOCK_EVT_MODE_ONESHOT:
 	case CLOCK_EVT_MODE_UNUSED:
 	case CLOCK_EVT_MODE_SHUTDOWN:
-		raw_local_irq_save(flags);
 		OIER &= ~OIER_E0;
 		OSSR = OSSR_M0;
-		raw_local_irq_restore(flags);
 		break;
 
 	case CLOCK_EVT_MODE_RESUME:
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
new file mode 100644
index 000000000000..aeceb9b92aeb
--- /dev/null
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -0,0 +1,84 @@
+if ARCH_SHMOBILE
+
+comment "SH-Mobile System Type"
+
+config ARCH_SH7367
+	bool "SH-Mobile G3 (SH7367)"
+	select CPU_V6
+	select HAVE_CLK
+	select COMMON_CLKDEV
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+
+config ARCH_SH7377
+	bool "SH-Mobile G4 (SH7377)"
+	select CPU_V7
+	select HAVE_CLK
+	select COMMON_CLKDEV
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+
+config ARCH_SH7372
+	bool "SH-Mobile AP4 (SH7372)"
+	select CPU_V7
+	select HAVE_CLK
+	select COMMON_CLKDEV
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+
+comment "SH-Mobile Board Type"
+
+config MACH_G3EVM
+	bool "G3EVM board"
+	depends on ARCH_SH7367
+	select ARCH_REQUIRE_GPIOLIB
+
+config MACH_G4EVM
+	bool "G4EVM board"
+	depends on ARCH_SH7377
+	select ARCH_REQUIRE_GPIOLIB
+
+config MACH_AP4EVB
+	bool "AP4EVB board"
+	depends on ARCH_SH7372
+	select ARCH_REQUIRE_GPIOLIB
+
+comment "SH-Mobile System Configuration"
+
+menu "Memory configuration"
+
+config MEMORY_START
+	hex "Physical memory start address"
+	default "0x50000000" if MACH_G3EVM
+	default "0x40000000" if MACH_G4EVM
+	default "0x40000000" if MACH_AP4EVB
+	default "0x00000000"
+	---help---
+	  Tweak this only when porting to a new machine which does not
+	  already have a defconfig. Changing it from the known correct
+	  value on any of the known systems will only lead to disaster.
+
+config MEMORY_SIZE
+	hex "Physical memory size"
+	default "0x08000000" if MACH_G3EVM
+	default "0x08000000" if MACH_G4EVM
+	default "0x10000000" if MACH_AP4EVB
+	default "0x04000000"
+	help
+	  This sets the default memory size assumed by your kernel. It can
+	  be overridden as normal by the 'mem=' argument on the kernel command
+	  line.
+
+endmenu
+
+menu "Timer and clock configuration"
+
+config SH_TIMER_CMT
+	bool "CMT timer driver"
+	default y
+	help
+	  This enables build of the CMT timer driver.
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
new file mode 100644
index 000000000000..6d385d371c33
--- /dev/null
+++ b/arch/arm/mach-shmobile/Makefile
@@ -0,0 +1,22 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Common objects
+obj-y				:= timer.o console.o
+
+# CPU objects
+obj-$(CONFIG_ARCH_SH7367)	+= setup-sh7367.o clock-sh7367.o intc-sh7367.o
+obj-$(CONFIG_ARCH_SH7377)	+= setup-sh7377.o clock-sh7367.o intc-sh7377.o
+obj-$(CONFIG_ARCH_SH7372)	+= setup-sh7372.o clock-sh7367.o intc-sh7372.o
+
+# Pinmux setup
+pfc-$(CONFIG_ARCH_SH7367)	:= pfc-sh7367.o
+pfc-$(CONFIG_ARCH_SH7377)	:= pfc-sh7377.o
+pfc-$(CONFIG_ARCH_SH7372)	:= pfc-sh7372.o
+obj-$(CONFIG_GENERIC_GPIO)	+= $(pfc-y)
+
+# Board objects
+obj-$(CONFIG_MACH_G3EVM)	+= board-g3evm.o
+obj-$(CONFIG_MACH_G4EVM)	+= board-g4evm.o
+obj-$(CONFIG_MACH_AP4EVB)	+= board-ap4evb.o
diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot
new file mode 100644
index 000000000000..1c08ee9de86a
--- /dev/null
+++ b/arch/arm/mach-shmobile/Makefile.boot
@@ -0,0 +1,9 @@
+__ZRELADDR	:= $(shell /bin/bash -c 'printf "0x%08x" \
+		     $$[$(CONFIG_MEMORY_START) + 0x8000]')
+
+   zreladdr-y   := $(__ZRELADDR)
+
+# Unsupported legacy stuff
+#
+#params_phys-y (Instead: Pass atags pointer in r2)
+#initrd_phys-y (Instead: Use compiled-in initramfs)
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
new file mode 100644
index 000000000000..1c2ec96ce261
--- /dev/null
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -0,0 +1,333 @@
+/*
+ * AP4EVB board support
+ *
+ * Copyright (C) 2010  Magnus Damm
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/io.h>
+#include <linux/smsc911x.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/input/sh_keysc.h>
+#include <mach/common.h>
+#include <mach/sh7372.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+/*
+ * Address	Interface		BusWidth	note
+ * ------------------------------------------------------------------
+ * 0x0000_0000	NOR Flash ROM (MCP)	16bit		SW7 : bit1 = ON
+ * 0x0800_0000	user area		-
+ * 0x1000_0000	NOR Flash ROM (MCP)	16bit		SW7 : bit1 = OFF
+ * 0x1400_0000	Ether (LAN9220)		16bit
+ * 0x1600_0000	user area		-		cannot use with NAND
+ * 0x1800_0000	user area		-
+ * 0x1A00_0000	-
+ * 0x4000_0000	LPDDR2-SDRAM (POP)	32bit
+ */
+
+/*
+ * NOR Flash ROM
+ *
+ *  SW1  |     SW2    | SW7  | NOR Flash ROM
+ *  bit1 | bit1  bit2 | bit1 | Memory allocation
+ * ------+------------+------+------------------
+ *  OFF  | ON     OFF | ON   |    Area 0
+ *  OFF  | ON     OFF | OFF  |    Area 4
+ */
+
+/*
+ * NAND Flash ROM
+ *
+ *  SW1  |     SW2    | SW7  | NAND Flash ROM
+ *  bit1 | bit1  bit2 | bit2 | Memory allocation
+ * ------+------------+------+------------------
+ *  OFF  | ON     OFF | ON   |    FCE 0
+ *  OFF  | ON     OFF | OFF  |    FCE 1
+ */
+
+/*
+ * SMSC 9220
+ *
+ *  SW1		SMSC 9220
+ * -----------------------
+ *  ON		access disable
+ *  OFF		access enable
+ */
+
+/*
+ * KEYSC
+ *
+ * SW43		KEYSC
+ * -------------------------
+ * ON		enable
+ * OFF		disable
+ */
+
+/* MTD */
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name		= "loader",
+		.offset		= 0x00000000,
+		.size		= 512 * 1024,
+	},
+	{
+		.name		= "bootenv",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 512 * 1024,
+	},
+	{
+		.name		= "kernel_ro",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 8 * 1024 * 1024,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	{
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 8 * 1024 * 1024,
+	},
+	{
+		.name		= "data",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 2,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+	[0]	= {
+		.start	= 0x00000000,
+		.end	= 0x08000000 - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.dev		= {
+		.platform_data	= &nor_flash_data,
+	},
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.resource	= nor_flash_resources,
+};
+
+/* SMSC 9220 */
+static struct resource smc911x_resources[] = {
+	{
+		.start	= 0x14000000,
+		.end	= 0x16000000 - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= 6,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
+static struct smsc911x_platform_config smsc911x_info = {
+	.flags		= SMSC911X_USE_16BIT | SMSC911X_SAVE_MAC_ADDRESS,
+	.irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type       = SMSC911X_IRQ_TYPE_PUSH_PULL,
+};
+
+static struct platform_device smc911x_device = {
+	.name           = "smsc911x",
+	.id             = -1,
+	.num_resources  = ARRAY_SIZE(smc911x_resources),
+	.resource       = smc911x_resources,
+	.dev            = {
+		.platform_data = &smsc911x_info,
+	},
+};
+
+/* KEYSC (Needs SW43 set to ON) */
+static struct sh_keysc_info keysc_info = {
+	.mode		= SH_KEYSC_MODE_1,
+	.scan_timing	= 3,
+	.delay		= 2500,
+	.keycodes = {
+		KEY_0, KEY_1, KEY_2, KEY_3, KEY_4,
+		KEY_5, KEY_6, KEY_7, KEY_8, KEY_9,
+		KEY_A, KEY_B, KEY_C, KEY_D, KEY_E,
+		KEY_F, KEY_G, KEY_H, KEY_I, KEY_J,
+		KEY_K, KEY_L, KEY_M, KEY_N, KEY_O,
+	},
+};
+
+static struct resource keysc_resources[] = {
+	[0] = {
+		.name	= "KEYSC",
+		.start  = 0xe61b0000,
+		.end    = 0xe61b0063,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 79,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device keysc_device = {
+	.name           = "sh_keysc",
+	.id             = 0, /* "keysc0" clock */
+	.num_resources  = ARRAY_SIZE(keysc_resources),
+	.resource       = keysc_resources,
+	.dev	= {
+		.platform_data	= &keysc_info,
+	},
+};
+
+/* SDHI0 */
+static struct resource sdhi0_resources[] = {
+	[0] = {
+		.name	= "SDHI0",
+		.start  = 0xe6850000,
+		.end    = 0xe68501ff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 96,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sdhi0_device = {
+	.name           = "sh_mobile_sdhi",
+	.num_resources  = ARRAY_SIZE(sdhi0_resources),
+	.resource       = sdhi0_resources,
+	.id             = 0,
+};
+
+static struct platform_device *ap4evb_devices[] __initdata = {
+	&nor_flash_device,
+	&smc911x_device,
+	&keysc_device,
+	&sdhi0_device,
+};
+
+static struct map_desc ap4evb_io_desc[] __initdata = {
+	/* create a 1:1 entity map for 0xe6xxxxxx
+	 * used by CPGA, INTC and PFC.
+	 */
+	{
+		.virtual	= 0xe6000000,
+		.pfn		= __phys_to_pfn(0xe6000000),
+		.length		= 256 << 20,
+		.type		= MT_DEVICE_NONSHARED
+	},
+};
+
+static void __init ap4evb_map_io(void)
+{
+	iotable_init(ap4evb_io_desc, ARRAY_SIZE(ap4evb_io_desc));
+
+	/* setup early devices, clocks and console here as well */
+	sh7372_add_early_devices();
+	sh7367_clock_init(); /* use g3 clocks for now */
+	shmobile_setup_console();
+}
+
+static void __init ap4evb_init(void)
+{
+	sh7372_pinmux_init();
+
+	/* enable SCIFA0 */
+	gpio_request(GPIO_FN_SCIFA0_TXD, NULL);
+	gpio_request(GPIO_FN_SCIFA0_RXD, NULL);
+
+	/* enable SMSC911X */
+	gpio_request(GPIO_FN_CS5A,	NULL);
+	gpio_request(GPIO_FN_IRQ6_39,	NULL);
+
+	/* enable LED 1 - 4 */
+	gpio_request(GPIO_PORT185, NULL);
+	gpio_request(GPIO_PORT186, NULL);
+	gpio_request(GPIO_PORT187, NULL);
+	gpio_request(GPIO_PORT188, NULL);
+	gpio_direction_output(GPIO_PORT185, 1);
+	gpio_direction_output(GPIO_PORT186, 1);
+	gpio_direction_output(GPIO_PORT187, 1);
+	gpio_direction_output(GPIO_PORT188, 1);
+	gpio_export(GPIO_PORT185, 0);
+	gpio_export(GPIO_PORT186, 0);
+	gpio_export(GPIO_PORT187, 0);
+	gpio_export(GPIO_PORT188, 0);
+
+	/* enable Debug switch (S6) */
+	gpio_request(GPIO_PORT32, NULL);
+	gpio_request(GPIO_PORT33, NULL);
+	gpio_request(GPIO_PORT34, NULL);
+	gpio_request(GPIO_PORT35, NULL);
+	gpio_direction_input(GPIO_PORT32);
+	gpio_direction_input(GPIO_PORT33);
+	gpio_direction_input(GPIO_PORT34);
+	gpio_direction_input(GPIO_PORT35);
+	gpio_export(GPIO_PORT32, 0);
+	gpio_export(GPIO_PORT33, 0);
+	gpio_export(GPIO_PORT34, 0);
+	gpio_export(GPIO_PORT35, 0);
+
+	/* enable KEYSC */
+	gpio_request(GPIO_FN_KEYOUT0, NULL);
+	gpio_request(GPIO_FN_KEYOUT1, NULL);
+	gpio_request(GPIO_FN_KEYOUT2, NULL);
+	gpio_request(GPIO_FN_KEYOUT3, NULL);
+	gpio_request(GPIO_FN_KEYOUT4, NULL);
+	gpio_request(GPIO_FN_KEYIN0_136, NULL);
+	gpio_request(GPIO_FN_KEYIN1_135, NULL);
+	gpio_request(GPIO_FN_KEYIN2_134, NULL);
+	gpio_request(GPIO_FN_KEYIN3_133, NULL);
+	gpio_request(GPIO_FN_KEYIN4,     NULL);
+
+	/* SDHI0 */
+	gpio_request(GPIO_FN_SDHICD0, NULL);
+	gpio_request(GPIO_FN_SDHIWP0, NULL);
+	gpio_request(GPIO_FN_SDHICMD0, NULL);
+	gpio_request(GPIO_FN_SDHICLK0, NULL);
+	gpio_request(GPIO_FN_SDHID0_3, NULL);
+	gpio_request(GPIO_FN_SDHID0_2, NULL);
+	gpio_request(GPIO_FN_SDHID0_1, NULL);
+	gpio_request(GPIO_FN_SDHID0_0, NULL);
+
+	sh7372_add_standard_devices();
+
+	platform_add_devices(ap4evb_devices, ARRAY_SIZE(ap4evb_devices));
+}
+
+MACHINE_START(AP4EVB, "ap4evb")
+	.phys_io	= 0xe6000000,
+	.io_pg_offst	= ((0xe6000000) >> 18) & 0xfffc,
+	.map_io		= ap4evb_map_io,
+	.init_irq	= sh7372_init_irq,
+	.init_machine	= ap4evb_init,
+	.timer		= &shmobile_timer,
+MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-g3evm.c b/arch/arm/mach-shmobile/board-g3evm.c
new file mode 100644
index 000000000000..9247503296c4
--- /dev/null
+++ b/arch/arm/mach-shmobile/board-g3evm.c
@@ -0,0 +1,333 @@
+/*
+ * G3EVM board support
+ *
+ * Copyright (C) 2010  Magnus Damm
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/sh_flctl.h>
+#include <linux/usb/r8a66597.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/input/sh_keysc.h>
+#include <mach/sh7367.h>
+#include <mach/common.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name		= "loader",
+		.offset		= 0x00000000,
+		.size		= 512 * 1024,
+	},
+	{
+		.name		= "bootenv",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 512 * 1024,
+	},
+	{
+		.name		= "kernel_ro",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 8 * 1024 * 1024,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	{
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 8 * 1024 * 1024,
+	},
+	{
+		.name		= "data",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 2,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+	[0]	= {
+		.start	= 0x00000000,
+		.end	= 0x08000000 - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.dev		= {
+		.platform_data	= &nor_flash_data,
+	},
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.resource	= nor_flash_resources,
+};
+
+/* USBHS */
+void usb_host_port_power(int port, int power)
+{
+	if (!power) /* only power-on supported for now */
+		return;
+
+	/* set VBOUT/PWEN and EXTLP0 in DVSTCTR */
+	__raw_writew(__raw_readw(0xe6890008) | 0x600, 0xe6890008);
+}
+
+static struct r8a66597_platdata usb_host_data = {
+	.on_chip = 1,
+	.port_power = usb_host_port_power,
+};
+
+static struct resource usb_host_resources[] = {
+	[0] = {
+		.name	= "USBHS",
+		.start	= 0xe6890000,
+		.end	= 0xe68900e5,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 65,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device usb_host_device = {
+	.name		= "r8a66597_hcd",
+	.id		= 0,
+	.dev = {
+		.platform_data		= &usb_host_data,
+		.dma_mask		= NULL,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(usb_host_resources),
+	.resource	= usb_host_resources,
+};
+
+/* KEYSC */
+static struct sh_keysc_info keysc_info = {
+	.mode		= SH_KEYSC_MODE_5,
+	.scan_timing	= 3,
+	.delay		= 100,
+	.keycodes = {
+		KEY_A, KEY_B, KEY_C, KEY_D, KEY_E, KEY_F, KEY_G,
+		KEY_H, KEY_I, KEY_J, KEY_K, KEY_L, KEY_M, KEY_N,
+		KEY_O, KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T, KEY_U,
+		KEY_V, KEY_W, KEY_X, KEY_Y, KEY_Z, KEY_HOME, KEY_SLEEP,
+		KEY_WAKEUP, KEY_COFFEE, KEY_0, KEY_1, KEY_2, KEY_3, KEY_4,
+		KEY_5, KEY_6, KEY_7, KEY_8, KEY_9, KEY_STOP, KEY_COMPUTER,
+	},
+};
+
+static struct resource keysc_resources[] = {
+	[0] = {
+		.name	= "KEYSC",
+		.start  = 0xe61b0000,
+		.end    = 0xe61b000f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 79,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device keysc_device = {
+	.name           = "sh_keysc",
+	.num_resources  = ARRAY_SIZE(keysc_resources),
+	.resource       = keysc_resources,
+	.dev	= {
+		.platform_data	= &keysc_info,
+	},
+};
+
+static struct mtd_partition nand_partition_info[] = {
+	{
+		.name	= "system",
+		.offset	= 0,
+		.size	= 64 * 1024 * 1024,
+	},
+	{
+		.name	= "userdata",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 128 * 1024 * 1024,
+	},
+	{
+		.name	= "cache",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 64 * 1024 * 1024,
+	},
+};
+
+static struct resource nand_flash_resources[] = {
+	[0] = {
+		.start	= 0xe6a30000,
+		.end	= 0xe6a3009b,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct sh_flctl_platform_data nand_flash_data = {
+	.parts		= nand_partition_info,
+	.nr_parts	= ARRAY_SIZE(nand_partition_info),
+	.flcmncr_val	= QTSEL_E | FCKSEL_E | TYPESEL_SET | NANWF_E
+			| SHBUSSEL | SEL_16BIT,
+};
+
+static struct platform_device nand_flash_device = {
+	.name		= "sh_flctl",
+	.resource	= nand_flash_resources,
+	.num_resources	= ARRAY_SIZE(nand_flash_resources),
+	.dev		= {
+		.platform_data = &nand_flash_data,
+	},
+};
+
+static struct platform_device *g3evm_devices[] __initdata = {
+	&nor_flash_device,
+	&usb_host_device,
+	&keysc_device,
+	&nand_flash_device,
+};
+
+static struct map_desc g3evm_io_desc[] __initdata = {
+	/* create a 1:1 entity map for 0xe6xxxxxx
+	 * used by CPGA, INTC and PFC.
+	 */
+	{
+		.virtual	= 0xe6000000,
+		.pfn		= __phys_to_pfn(0xe6000000),
+		.length		= 256 << 20,
+		.type		= MT_DEVICE_NONSHARED
+	},
+};
+
+static void __init g3evm_map_io(void)
+{
+	iotable_init(g3evm_io_desc, ARRAY_SIZE(g3evm_io_desc));
+
+	/* setup early devices, clocks and console here as well */
+	sh7367_add_early_devices();
+	sh7367_clock_init();
+	shmobile_setup_console();
+}
+
+static void __init g3evm_init(void)
+{
+	sh7367_pinmux_init();
+
+	/* Lit DS4 LED */
+	gpio_request(GPIO_PORT22, NULL);
+	gpio_direction_output(GPIO_PORT22, 1);
+	gpio_export(GPIO_PORT22, 0);
+
+	/* Lit DS8 LED */
+	gpio_request(GPIO_PORT23, NULL);
+	gpio_direction_output(GPIO_PORT23, 1);
+	gpio_export(GPIO_PORT23, 0);
+
+	/* Lit DS3 LED */
+	gpio_request(GPIO_PORT24, NULL);
+	gpio_direction_output(GPIO_PORT24, 1);
+	gpio_export(GPIO_PORT24, 0);
+
+	/* SCIFA1 */
+	gpio_request(GPIO_FN_SCIFA1_TXD, NULL);
+	gpio_request(GPIO_FN_SCIFA1_RXD, NULL);
+	gpio_request(GPIO_FN_SCIFA1_CTS, NULL);
+	gpio_request(GPIO_FN_SCIFA1_RTS, NULL);
+
+	/* USBHS */
+	gpio_request(GPIO_FN_VBUS0, NULL);
+	gpio_request(GPIO_FN_PWEN, NULL);
+	gpio_request(GPIO_FN_OVCN, NULL);
+	gpio_request(GPIO_FN_OVCN2, NULL);
+	gpio_request(GPIO_FN_EXTLP, NULL);
+	gpio_request(GPIO_FN_IDIN, NULL);
+
+	/* enable clock in SYMSTPCR2 */
+	__raw_writel(__raw_readl(0xe6158048) & ~(1 << 22), 0xe6158048);
+
+	/* setup USB phy */
+	__raw_writew(0x0300, 0xe605810a);	/* USBCR1 */
+	__raw_writew(0x00e0, 0xe60581c0);	/* CPFCH */
+	__raw_writew(0x6010, 0xe60581c6);	/* CGPOSR */
+	__raw_writew(0x8a0a, 0xe605810c);	/* USBCR2 */
+
+	/* KEYSC @ CN7 */
+	gpio_request(GPIO_FN_PORT42_KEYOUT0, NULL);
+	gpio_request(GPIO_FN_PORT43_KEYOUT1, NULL);
+	gpio_request(GPIO_FN_PORT44_KEYOUT2, NULL);
+	gpio_request(GPIO_FN_PORT45_KEYOUT3, NULL);
+	gpio_request(GPIO_FN_PORT46_KEYOUT4, NULL);
+	gpio_request(GPIO_FN_PORT47_KEYOUT5, NULL);
+	gpio_request(GPIO_FN_PORT48_KEYIN0_PU, NULL);
+	gpio_request(GPIO_FN_PORT49_KEYIN1_PU, NULL);
+	gpio_request(GPIO_FN_PORT50_KEYIN2_PU, NULL);
+	gpio_request(GPIO_FN_PORT55_KEYIN3_PU, NULL);
+	gpio_request(GPIO_FN_PORT56_KEYIN4_PU, NULL);
+	gpio_request(GPIO_FN_PORT57_KEYIN5_PU, NULL);
+	gpio_request(GPIO_FN_PORT58_KEYIN6_PU, NULL);
+
+	/* FLCTL */
+	gpio_request(GPIO_FN_FCE0, NULL);
+	gpio_request(GPIO_FN_D0_ED0_NAF0, NULL);
+	gpio_request(GPIO_FN_D1_ED1_NAF1, NULL);
+	gpio_request(GPIO_FN_D2_ED2_NAF2, NULL);
+	gpio_request(GPIO_FN_D3_ED3_NAF3, NULL);
+	gpio_request(GPIO_FN_D4_ED4_NAF4, NULL);
+	gpio_request(GPIO_FN_D5_ED5_NAF5, NULL);
+	gpio_request(GPIO_FN_D6_ED6_NAF6, NULL);
+	gpio_request(GPIO_FN_D7_ED7_NAF7, NULL);
+	gpio_request(GPIO_FN_D8_ED8_NAF8, NULL);
+	gpio_request(GPIO_FN_D9_ED9_NAF9, NULL);
+	gpio_request(GPIO_FN_D10_ED10_NAF10, NULL);
+	gpio_request(GPIO_FN_D11_ED11_NAF11, NULL);
+	gpio_request(GPIO_FN_D12_ED12_NAF12, NULL);
+	gpio_request(GPIO_FN_D13_ED13_NAF13, NULL);
+	gpio_request(GPIO_FN_D14_ED14_NAF14, NULL);
+	gpio_request(GPIO_FN_D15_ED15_NAF15, NULL);
+	gpio_request(GPIO_FN_WE0_XWR0_FWE, NULL);
+	gpio_request(GPIO_FN_FRB, NULL);
+	/* FOE, FCDE, FSC on dedicated pins */
+	__raw_writel(__raw_readl(0xe6158048) & ~(1 << 15), 0xe6158048);
+
+	sh7367_add_standard_devices();
+
+	platform_add_devices(g3evm_devices, ARRAY_SIZE(g3evm_devices));
+}
+
+MACHINE_START(G3EVM, "g3evm")
+	.phys_io	= 0xe6000000,
+	.io_pg_offst	= ((0xe6000000) >> 18) & 0xfffc,
+	.map_io		= g3evm_map_io,
+	.init_irq	= sh7367_init_irq,
+	.init_machine	= g3evm_init,
+	.timer		= &shmobile_timer,
+MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c
new file mode 100644
index 000000000000..10673a90be52
--- /dev/null
+++ b/arch/arm/mach-shmobile/board-g4evm.c
@@ -0,0 +1,268 @@
+/*
+ * G4EVM board support
+ *
+ * Copyright (C) 2010  Magnus Damm
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/usb/r8a66597.h>
+#include <linux/io.h>
+#include <linux/input.h>
+#include <linux/input/sh_keysc.h>
+#include <linux/gpio.h>
+#include <mach/sh7377.h>
+#include <mach/common.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name		= "loader",
+		.offset		= 0x00000000,
+		.size		= 512 * 1024,
+	},
+	{
+		.name		= "bootenv",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 512 * 1024,
+	},
+	{
+		.name		= "kernel_ro",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 8 * 1024 * 1024,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	{
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 8 * 1024 * 1024,
+	},
+	{
+		.name		= "data",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 2,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+	[0]	= {
+		.start	= 0x00000000,
+		.end	= 0x08000000 - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.dev		= {
+		.platform_data	= &nor_flash_data,
+	},
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.resource	= nor_flash_resources,
+};
+
+/* USBHS */
+void usb_host_port_power(int port, int power)
+{
+	if (!power) /* only power-on supported for now */
+		return;
+
+	/* set VBOUT/PWEN and EXTLP0 in DVSTCTR */
+	__raw_writew(__raw_readw(0xe6890008) | 0x600, 0xe6890008);
+}
+
+static struct r8a66597_platdata usb_host_data = {
+	.on_chip = 1,
+	.port_power = usb_host_port_power,
+};
+
+static struct resource usb_host_resources[] = {
+	[0] = {
+		.name	= "USBHS",
+		.start	= 0xe6890000,
+		.end	= 0xe68900e5,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 65,
+		.end	= 65,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device usb_host_device = {
+	.name		= "r8a66597_hcd",
+	.id		= 0,
+	.dev = {
+		.platform_data		= &usb_host_data,
+		.dma_mask		= NULL,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(usb_host_resources),
+	.resource	= usb_host_resources,
+};
+
+/* KEYSC */
+static struct sh_keysc_info keysc_info = {
+	.mode		= SH_KEYSC_MODE_5,
+	.scan_timing	= 3,
+	.delay		= 100,
+	.keycodes = {
+		KEY_A, KEY_B, KEY_C, KEY_D, KEY_E, KEY_F,
+		KEY_G, KEY_H, KEY_I, KEY_J, KEY_K, KEY_L,
+		KEY_M, KEY_N, KEY_U, KEY_P, KEY_Q, KEY_R,
+		KEY_S, KEY_T, KEY_U, KEY_V, KEY_W, KEY_X,
+		KEY_Y, KEY_Z, KEY_HOME, KEY_SLEEP, KEY_WAKEUP, KEY_COFFEE,
+		KEY_0, KEY_1, KEY_2, KEY_3, KEY_4, KEY_5,
+		KEY_6, KEY_7, KEY_8, KEY_9, KEY_STOP, KEY_COMPUTER,
+	},
+};
+
+static struct resource keysc_resources[] = {
+	[0] = {
+		.name	= "KEYSC",
+		.start  = 0xe61b0000,
+		.end    = 0xe61b000f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 79,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device keysc_device = {
+	.name           = "sh_keysc",
+	.id             = 0, /* keysc0 clock */
+	.num_resources  = ARRAY_SIZE(keysc_resources),
+	.resource       = keysc_resources,
+	.dev	= {
+		.platform_data	= &keysc_info,
+	},
+};
+
+static struct platform_device *g4evm_devices[] __initdata = {
+	&nor_flash_device,
+	&usb_host_device,
+	&keysc_device,
+};
+
+static struct map_desc g4evm_io_desc[] __initdata = {
+	/* create a 1:1 entity map for 0xe6xxxxxx
+	 * used by CPGA, INTC and PFC.
+	 */
+	{
+		.virtual	= 0xe6000000,
+		.pfn		= __phys_to_pfn(0xe6000000),
+		.length		= 256 << 20,
+		.type		= MT_DEVICE_NONSHARED
+	},
+};
+
+static void __init g4evm_map_io(void)
+{
+	iotable_init(g4evm_io_desc, ARRAY_SIZE(g4evm_io_desc));
+
+	/* setup early devices, clocks and console here as well */
+	sh7377_add_early_devices();
+	sh7367_clock_init(); /* use g3 clocks for now */
+	shmobile_setup_console();
+}
+
+static void __init g4evm_init(void)
+{
+	sh7377_pinmux_init();
+
+	/* Lit DS14 LED */
+	gpio_request(GPIO_PORT109, NULL);
+	gpio_direction_output(GPIO_PORT109, 1);
+	gpio_export(GPIO_PORT109, 1);
+
+	/* Lit DS15 LED */
+	gpio_request(GPIO_PORT110, NULL);
+	gpio_direction_output(GPIO_PORT110, 1);
+	gpio_export(GPIO_PORT110, 1);
+
+	/* Lit DS16 LED */
+	gpio_request(GPIO_PORT112, NULL);
+	gpio_direction_output(GPIO_PORT112, 1);
+	gpio_export(GPIO_PORT112, 1);
+
+	/* Lit DS17 LED */
+	gpio_request(GPIO_PORT113, NULL);
+	gpio_direction_output(GPIO_PORT113, 1);
+	gpio_export(GPIO_PORT113, 1);
+
+	/* USBHS */
+	gpio_request(GPIO_FN_VBUS_0, NULL);
+	gpio_request(GPIO_FN_PWEN, NULL);
+	gpio_request(GPIO_FN_OVCN, NULL);
+	gpio_request(GPIO_FN_OVCN2, NULL);
+	gpio_request(GPIO_FN_EXTLP, NULL);
+	gpio_request(GPIO_FN_IDIN, NULL);
+
+	/* enable clock in SMSTPCR3 */
+	__raw_writel(__raw_readl(0xe615013c) & ~(1 << 22), 0xe615013c);
+
+	/* setup USB phy */
+	__raw_writew(0x0200, 0xe605810a);       /* USBCR1 */
+	__raw_writew(0x00e0, 0xe60581c0);       /* CPFCH */
+	__raw_writew(0x6010, 0xe60581c6);       /* CGPOSR */
+	__raw_writew(0x8a0a, 0xe605810c);       /* USBCR2 */
+
+	/* KEYSC @ CN31 */
+	gpio_request(GPIO_FN_PORT60_KEYOUT5, NULL);
+	gpio_request(GPIO_FN_PORT61_KEYOUT4, NULL);
+	gpio_request(GPIO_FN_PORT62_KEYOUT3, NULL);
+	gpio_request(GPIO_FN_PORT63_KEYOUT2, NULL);
+	gpio_request(GPIO_FN_PORT64_KEYOUT1, NULL);
+	gpio_request(GPIO_FN_PORT65_KEYOUT0, NULL);
+	gpio_request(GPIO_FN_PORT66_KEYIN0_PU, NULL);
+	gpio_request(GPIO_FN_PORT67_KEYIN1_PU, NULL);
+	gpio_request(GPIO_FN_PORT68_KEYIN2_PU, NULL);
+	gpio_request(GPIO_FN_PORT69_KEYIN3_PU, NULL);
+	gpio_request(GPIO_FN_PORT70_KEYIN4_PU, NULL);
+	gpio_request(GPIO_FN_PORT71_KEYIN5_PU, NULL);
+	gpio_request(GPIO_FN_PORT72_KEYIN6_PU, NULL);
+
+	sh7377_add_standard_devices();
+
+	platform_add_devices(g4evm_devices, ARRAY_SIZE(g4evm_devices));
+}
+
+MACHINE_START(G4EVM, "g4evm")
+	.phys_io	= 0xe6000000,
+	.io_pg_offst	= ((0xe6000000) >> 18) & 0xfffc,
+	.map_io		= g4evm_map_io,
+	.init_irq	= sh7377_init_irq,
+	.init_machine	= g4evm_init,
+	.timer		= &shmobile_timer,
+MACHINE_END
diff --git a/arch/arm/mach-shmobile/clock-sh7367.c b/arch/arm/mach-shmobile/clock-sh7367.c
new file mode 100644
index 000000000000..bb940c6e4e6c
--- /dev/null
+++ b/arch/arm/mach-shmobile/clock-sh7367.c
@@ -0,0 +1,103 @@
+/*
+ * Preliminary clock framework support for sh7367
+ *
+ * Copyright (C) 2010  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+
+struct clk {
+	const char *name;
+	unsigned long rate;
+};
+
+#include <asm/clkdev.h>
+
+int __clk_get(struct clk *clk)
+{
+	return 1;
+}
+EXPORT_SYMBOL(__clk_get);
+
+void __clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(__clk_put);
+
+
+int clk_enable(struct clk *clk)
+{
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return clk ? clk->rate : 0;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+/* a static peripheral clock for now - enough to get sh-sci working */
+static struct clk peripheral_clk = {
+	.name	    = "peripheral_clk",
+	.rate	    = 48000000,
+};
+
+/* a static rclk for now - enough to get sh_cmt working */
+static struct clk r_clk = {
+	.name	    = "r_clk",
+	.rate	    = 32768,
+};
+
+/* a static usb0 for now - enough to get r8a66597 working */
+static struct clk usb0_clk = {
+	.name	    = "usb0",
+};
+
+/* a static keysc0 clk for now - enough to get sh_keysc working */
+static struct clk keysc0_clk = {
+	.name	    = "keysc0",
+};
+
+static struct clk_lookup lookups[] = {
+	{
+		.clk = &peripheral_clk,
+	}, {
+		.clk = &r_clk,
+	}, {
+		.clk = &usb0_clk,
+	}, {
+		.clk = &keysc0_clk,
+	}
+};
+
+void __init sh7367_clock_init(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(lookups); i++) {
+		lookups[i].con_id = lookups[i].clk->name;
+		clkdev_add(&lookups[i]);
+	}
+}
diff --git a/arch/arm/mach-shmobile/console.c b/arch/arm/mach-shmobile/console.c
new file mode 100644
index 000000000000..9411a5bf4fd6
--- /dev/null
+++ b/arch/arm/mach-shmobile/console.c
@@ -0,0 +1,31 @@
+/*
+ * SH-Mobile Console
+ *
+ * Copyright (C) 2010  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <mach/common.h>
+#include <asm/mach/map.h>
+
+void __init shmobile_setup_console(void)
+{
+	parse_early_param();
+
+	/* Let earlyprintk output early console messages */
+	early_platform_driver_probe("earlyprintk", 1, 1);
+}
diff --git a/arch/arm/mach-shmobile/include/mach/clkdev.h b/arch/arm/mach-shmobile/include/mach/clkdev.h
new file mode 100644
index 000000000000..36d0163a857a
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+int __clk_get(struct clk *clk);
+void __clk_put(struct clk *clk);
+
+#endif /* __ASM_MACH_CLKDEV_H */
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
new file mode 100644
index 000000000000..57903605cc51
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -0,0 +1,23 @@
+#ifndef __ARCH_MACH_COMMON_H
+#define __ARCH_MACH_COMMON_H
+
+extern struct sys_timer shmobile_timer;
+extern void shmobile_setup_console(void);
+
+extern void sh7367_init_irq(void);
+extern void sh7367_add_early_devices(void);
+extern void sh7367_add_standard_devices(void);
+extern void sh7367_clock_init(void);
+extern void sh7367_pinmux_init(void);
+
+extern void sh7377_init_irq(void);
+extern void sh7377_add_early_devices(void);
+extern void sh7377_add_standard_devices(void);
+extern void sh7377_pinmux_init(void);
+
+extern void sh7372_init_irq(void);
+extern void sh7372_add_early_devices(void);
+extern void sh7372_add_standard_devices(void);
+extern void sh7372_pinmux_init(void);
+
+#endif /* __ARCH_MACH_COMMON_H */
diff --git a/arch/arm/mach-shmobile/include/mach/dma.h b/arch/arm/mach-shmobile/include/mach/dma.h
new file mode 100644
index 000000000000..40a8c178f10d
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/dma.h
@@ -0,0 +1 @@
+/* empty */
diff --git a/arch/arm/mach-shmobile/include/mach/entry-macro.S b/arch/arm/mach-shmobile/include/mach/entry-macro.S
new file mode 100644
index 000000000000..a285d13c7416
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/entry-macro.S
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
+	.macro  disable_fiq
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+	ldr     \base, =INTFLGA
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+	ldr     \irqnr, [\base]
+	cmp	\irqnr, #0
+	beq	1000f
+	/* intevt to irq number */
+	lsr	\irqnr, \irqnr, #0x5
+	subs	\irqnr, \irqnr, #16
+
+1000:
+	.endm
diff --git a/arch/arm/mach-shmobile/include/mach/gpio.h b/arch/arm/mach-shmobile/include/mach/gpio.h
new file mode 100644
index 000000000000..5bc6bd444d72
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/gpio.h
@@ -0,0 +1,48 @@
+/*
+ * Generic GPIO API and pinmux table support
+ *
+ * Copyright (c) 2008  Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+
+#define ARCH_NR_GPIOS 1024
+#include <linux/sh_pfc.h>
+
+#ifdef CONFIG_GPIOLIB
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	__gpio_set_value(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned gpio)
+{
+	return __gpio_cansleep(gpio);
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return -ENOSYS;
+}
+
+static inline int irq_to_gpio(unsigned int irq)
+{
+	return -EINVAL;
+}
+
+#endif /* CONFIG_GPIOLIB */
+
+#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-shmobile/include/mach/hardware.h b/arch/arm/mach-shmobile/include/mach/hardware.h
new file mode 100644
index 000000000000..3f0ef194603e
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/hardware.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_HARDWARE_H
+#define __ASM_MACH_HARDWARE_H
+
+/* INTFLGA register - used by low level interrupt code in entry-macro.S */
+#define INTFLGA			0xe6980018
+
+#endif /* __ASM_MACH_HARDWARE_H */
diff --git a/arch/arm/mach-shmobile/include/mach/io.h b/arch/arm/mach-shmobile/include/mach/io.h
new file mode 100644
index 000000000000..7339fe46cb7c
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/io.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_MACH_IO_H
+#define __ASM_MACH_IO_H
+
+#define IO_SPACE_LIMIT		0xffffffff
+
+#define __io(a)			((void __iomem *)(a))
+#define __mem_pci(a)		(a)
+
+#endif /* __ASM_MACH_IO_H */
diff --git a/arch/arm/mach-shmobile/include/mach/irqs.h b/arch/arm/mach-shmobile/include/mach/irqs.h
new file mode 100644
index 000000000000..5179b72e1ee3
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/irqs.h
@@ -0,0 +1,10 @@
+#ifndef __ASM_MACH_IRQS_H
+#define __ASM_MACH_IRQS_H
+
+#define NR_IRQS         512
+#define NR_IRQS_LEGACY  8
+
+#define evt2irq(evt)		(((evt) >> 5) - 16)
+#define irq2evt(irq)		(((irq) + 16) << 5)
+
+#endif /* __ASM_MACH_IRQS_H */
diff --git a/arch/arm/mach-shmobile/include/mach/memory.h b/arch/arm/mach-shmobile/include/mach/memory.h
new file mode 100644
index 000000000000..e188183f4dce
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/memory.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_MEMORY_H
+#define __ASM_MACH_MEMORY_H
+
+#define PHYS_OFFSET	UL(CONFIG_MEMORY_START)
+#define MEM_SIZE	UL(CONFIG_MEMORY_SIZE)
+
+#endif /* __ASM_MACH_MEMORY_H */
diff --git a/arch/arm/mach-shmobile/include/mach/sh7367.h b/arch/arm/mach-shmobile/include/mach/sh7367.h
new file mode 100644
index 000000000000..52d0de686f68
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/sh7367.h
@@ -0,0 +1,332 @@
+#ifndef __ASM_SH7367_H__
+#define __ASM_SH7367_H__
+
+/* Pin Function Controller:
+ * GPIO_FN_xx - GPIO used to select pin function
+ * GPIO_PORTxx - GPIO mapped to real I/O pin on CPU
+ */
+enum {
+	/* 49-1 -> 49-6 (GPIO) */
+	GPIO_PORT0, GPIO_PORT1, GPIO_PORT2, GPIO_PORT3, GPIO_PORT4,
+	GPIO_PORT5, GPIO_PORT6, GPIO_PORT7, GPIO_PORT8, GPIO_PORT9,
+
+	GPIO_PORT10, GPIO_PORT11, GPIO_PORT12, GPIO_PORT13, GPIO_PORT14,
+	GPIO_PORT15, GPIO_PORT16, GPIO_PORT17, GPIO_PORT18, GPIO_PORT19,
+
+	GPIO_PORT20, GPIO_PORT21, GPIO_PORT22, GPIO_PORT23, GPIO_PORT24,
+	GPIO_PORT25, GPIO_PORT26, GPIO_PORT27, GPIO_PORT28, GPIO_PORT29,
+
+	GPIO_PORT30, GPIO_PORT31, GPIO_PORT32, GPIO_PORT33, GPIO_PORT34,
+	GPIO_PORT35, GPIO_PORT36, GPIO_PORT37, GPIO_PORT38, GPIO_PORT39,
+
+	GPIO_PORT40, GPIO_PORT41, GPIO_PORT42, GPIO_PORT43, GPIO_PORT44,
+	GPIO_PORT45, GPIO_PORT46, GPIO_PORT47, GPIO_PORT48, GPIO_PORT49,
+
+	GPIO_PORT50, GPIO_PORT51, GPIO_PORT52, GPIO_PORT53, GPIO_PORT54,
+	GPIO_PORT55, GPIO_PORT56, GPIO_PORT57, GPIO_PORT58, GPIO_PORT59,
+
+	GPIO_PORT60, GPIO_PORT61, GPIO_PORT62, GPIO_PORT63, GPIO_PORT64,
+	GPIO_PORT65, GPIO_PORT66, GPIO_PORT67, GPIO_PORT68, GPIO_PORT69,
+
+	GPIO_PORT70, GPIO_PORT71, GPIO_PORT72, GPIO_PORT73, GPIO_PORT74,
+	GPIO_PORT75, GPIO_PORT76, GPIO_PORT77, GPIO_PORT78, GPIO_PORT79,
+
+	GPIO_PORT80, GPIO_PORT81, GPIO_PORT82, GPIO_PORT83, GPIO_PORT84,
+	GPIO_PORT85, GPIO_PORT86, GPIO_PORT87, GPIO_PORT88, GPIO_PORT89,
+
+	GPIO_PORT90, GPIO_PORT91, GPIO_PORT92, GPIO_PORT93, GPIO_PORT94,
+	GPIO_PORT95, GPIO_PORT96, GPIO_PORT97, GPIO_PORT98, GPIO_PORT99,
+
+	GPIO_PORT100, GPIO_PORT101, GPIO_PORT102, GPIO_PORT103, GPIO_PORT104,
+	GPIO_PORT105, GPIO_PORT106, GPIO_PORT107, GPIO_PORT108, GPIO_PORT109,
+
+	GPIO_PORT110, GPIO_PORT111, GPIO_PORT112, GPIO_PORT113, GPIO_PORT114,
+	GPIO_PORT115, GPIO_PORT116, GPIO_PORT117, GPIO_PORT118, GPIO_PORT119,
+
+	GPIO_PORT120, GPIO_PORT121, GPIO_PORT122, GPIO_PORT123, GPIO_PORT124,
+	GPIO_PORT125, GPIO_PORT126, GPIO_PORT127, GPIO_PORT128, GPIO_PORT129,
+
+	GPIO_PORT130, GPIO_PORT131, GPIO_PORT132, GPIO_PORT133, GPIO_PORT134,
+	GPIO_PORT135, GPIO_PORT136, GPIO_PORT137, GPIO_PORT138, GPIO_PORT139,
+
+	GPIO_PORT140, GPIO_PORT141, GPIO_PORT142, GPIO_PORT143, GPIO_PORT144,
+	GPIO_PORT145, GPIO_PORT146, GPIO_PORT147, GPIO_PORT148, GPIO_PORT149,
+
+	GPIO_PORT150, GPIO_PORT151, GPIO_PORT152, GPIO_PORT153, GPIO_PORT154,
+	GPIO_PORT155, GPIO_PORT156, GPIO_PORT157, GPIO_PORT158, GPIO_PORT159,
+
+	GPIO_PORT160, GPIO_PORT161, GPIO_PORT162, GPIO_PORT163, GPIO_PORT164,
+	GPIO_PORT165, GPIO_PORT166, GPIO_PORT167, GPIO_PORT168, GPIO_PORT169,
+
+	GPIO_PORT170, GPIO_PORT171, GPIO_PORT172, GPIO_PORT173, GPIO_PORT174,
+	GPIO_PORT175, GPIO_PORT176, GPIO_PORT177, GPIO_PORT178, GPIO_PORT179,
+
+	GPIO_PORT180, GPIO_PORT181, GPIO_PORT182, GPIO_PORT183, GPIO_PORT184,
+	GPIO_PORT185, GPIO_PORT186, GPIO_PORT187, GPIO_PORT188, GPIO_PORT189,
+
+	GPIO_PORT190, GPIO_PORT191, GPIO_PORT192, GPIO_PORT193, GPIO_PORT194,
+	GPIO_PORT195, GPIO_PORT196, GPIO_PORT197, GPIO_PORT198, GPIO_PORT199,
+
+	GPIO_PORT200, GPIO_PORT201, GPIO_PORT202, GPIO_PORT203, GPIO_PORT204,
+	GPIO_PORT205, GPIO_PORT206, GPIO_PORT207, GPIO_PORT208, GPIO_PORT209,
+
+	GPIO_PORT210, GPIO_PORT211, GPIO_PORT212, GPIO_PORT213, GPIO_PORT214,
+	GPIO_PORT215, GPIO_PORT216, GPIO_PORT217, GPIO_PORT218, GPIO_PORT219,
+
+	GPIO_PORT220, GPIO_PORT221, GPIO_PORT222, GPIO_PORT223, GPIO_PORT224,
+	GPIO_PORT225, GPIO_PORT226, GPIO_PORT227, GPIO_PORT228, GPIO_PORT229,
+
+	GPIO_PORT230, GPIO_PORT231, GPIO_PORT232, GPIO_PORT233, GPIO_PORT234,
+	GPIO_PORT235, GPIO_PORT236, GPIO_PORT237, GPIO_PORT238, GPIO_PORT239,
+
+	GPIO_PORT240, GPIO_PORT241, GPIO_PORT242, GPIO_PORT243, GPIO_PORT244,
+	GPIO_PORT245, GPIO_PORT246, GPIO_PORT247, GPIO_PORT248, GPIO_PORT249,
+
+	GPIO_PORT250, GPIO_PORT251, GPIO_PORT252, GPIO_PORT253, GPIO_PORT254,
+	GPIO_PORT255, GPIO_PORT256, GPIO_PORT257, GPIO_PORT258, GPIO_PORT259,
+
+	GPIO_PORT260, GPIO_PORT261, GPIO_PORT262, GPIO_PORT263, GPIO_PORT264,
+	GPIO_PORT265, GPIO_PORT266, GPIO_PORT267, GPIO_PORT268, GPIO_PORT269,
+
+	GPIO_PORT270, GPIO_PORT271, GPIO_PORT272,
+
+	/* Special Pull-up / Pull-down Functions */
+	GPIO_FN_PORT48_KEYIN0_PU, GPIO_FN_PORT49_KEYIN1_PU,
+	GPIO_FN_PORT50_KEYIN2_PU, GPIO_FN_PORT55_KEYIN3_PU,
+	GPIO_FN_PORT56_KEYIN4_PU, GPIO_FN_PORT57_KEYIN5_PU,
+	GPIO_FN_PORT58_KEYIN6_PU,
+
+	/* 49-1 (FN) */
+	GPIO_FN_VBUS0, GPIO_FN_CPORT0, GPIO_FN_CPORT1, GPIO_FN_CPORT2,
+	GPIO_FN_CPORT3, GPIO_FN_CPORT4, GPIO_FN_CPORT5, GPIO_FN_CPORT6,
+	GPIO_FN_CPORT7, GPIO_FN_CPORT8, GPIO_FN_CPORT9, GPIO_FN_CPORT10,
+	GPIO_FN_CPORT11, GPIO_FN_SIN2, GPIO_FN_CPORT12, GPIO_FN_XCTS2,
+	GPIO_FN_CPORT13, GPIO_FN_RFSPO4, GPIO_FN_CPORT14, GPIO_FN_RFSPO5,
+	GPIO_FN_CPORT15, GPIO_FN_CPORT16, GPIO_FN_CPORT17, GPIO_FN_SOUT2,
+	GPIO_FN_CPORT18, GPIO_FN_XRTS2, GPIO_FN_CPORT19, GPIO_FN_CPORT20,
+	GPIO_FN_RFSPO6, GPIO_FN_CPORT21, GPIO_FN_STATUS0, GPIO_FN_CPORT22,
+	GPIO_FN_STATUS1, GPIO_FN_CPORT23, GPIO_FN_STATUS2, GPIO_FN_RFSPO7,
+	GPIO_FN_MPORT0, GPIO_FN_MPORT1, GPIO_FN_B_SYNLD1, GPIO_FN_B_SYNLD2,
+	GPIO_FN_XMAINPS, GPIO_FN_XDIVPS, GPIO_FN_XIDRST, GPIO_FN_IDCLK,
+	GPIO_FN_IDIO, GPIO_FN_SOUT1, GPIO_FN_SCIFA4_TXD,
+	GPIO_FN_M02_BERDAT, GPIO_FN_SIN1, GPIO_FN_SCIFA4_RXD, GPIO_FN_XWUP,
+	GPIO_FN_XRTS1, GPIO_FN_SCIFA4_RTS, GPIO_FN_M03_BERCLK,
+	GPIO_FN_XCTS1, GPIO_FN_SCIFA4_CTS,
+
+	/* 49-2 (FN) */
+	GPIO_FN_HSU_IQ_AGC6, GPIO_FN_MFG2_IN2, GPIO_FN_MSIOF2_MCK0,
+	GPIO_FN_HSU_IQ_AGC5, GPIO_FN_MFG2_IN1, GPIO_FN_MSIOF2_MCK1,
+	GPIO_FN_HSU_IQ_AGC4, GPIO_FN_MSIOF2_RSYNC,
+	GPIO_FN_HSU_IQ_AGC3, GPIO_FN_MFG2_OUT1, GPIO_FN_MSIOF2_RSCK,
+	GPIO_FN_HSU_IQ_AGC2, GPIO_FN_PORT42_KEYOUT0,
+	GPIO_FN_HSU_IQ_AGC1, GPIO_FN_PORT43_KEYOUT1,
+	GPIO_FN_HSU_IQ_AGC0, GPIO_FN_PORT44_KEYOUT2,
+	GPIO_FN_HSU_IQ_AGC_ST, GPIO_FN_PORT45_KEYOUT3,
+	GPIO_FN_HSU_IQ_PDO, GPIO_FN_PORT46_KEYOUT4,
+	GPIO_FN_HSU_IQ_PYO, GPIO_FN_PORT47_KEYOUT5,
+	GPIO_FN_HSU_EN_TXMUX_G3MO, GPIO_FN_PORT48_KEYIN0,
+	GPIO_FN_HSU_I_TXMUX_G3MO, GPIO_FN_PORT49_KEYIN1,
+	GPIO_FN_HSU_Q_TXMUX_G3MO, GPIO_FN_PORT50_KEYIN2,
+	GPIO_FN_HSU_SYO, GPIO_FN_PORT51_MSIOF2_TSYNC,
+	GPIO_FN_HSU_SDO, GPIO_FN_PORT52_MSIOF2_TSCK,
+	GPIO_FN_HSU_TGTTI_G3MO, GPIO_FN_PORT53_MSIOF2_TXD,
+	GPIO_FN_B_TIME_STAMP, GPIO_FN_PORT54_MSIOF2_RXD,
+	GPIO_FN_HSU_SDI, GPIO_FN_PORT55_KEYIN3,
+	GPIO_FN_HSU_SCO, GPIO_FN_PORT56_KEYIN4,
+	GPIO_FN_HSU_DREQ, GPIO_FN_PORT57_KEYIN5,
+	GPIO_FN_HSU_DACK, GPIO_FN_PORT58_KEYIN6,
+	GPIO_FN_HSU_CLK61M, GPIO_FN_PORT59_MSIOF2_SS1,
+	GPIO_FN_HSU_XRST, GPIO_FN_PORT60_MSIOF2_SS2,
+	GPIO_FN_PCMCLKO, GPIO_FN_SYNC8KO, GPIO_FN_DNPCM_A, GPIO_FN_UPPCM_A,
+	GPIO_FN_XTALB1L,
+	GPIO_FN_GPS_AGC1, GPIO_FN_SCIFA0_RTS,
+	GPIO_FN_GPS_AGC2, GPIO_FN_SCIFA0_SCK,
+	GPIO_FN_GPS_AGC3, GPIO_FN_SCIFA0_TXD,
+	GPIO_FN_GPS_AGC4, GPIO_FN_SCIFA0_RXD,
+	GPIO_FN_GPS_PWRD, GPIO_FN_SCIFA0_CTS,
+	GPIO_FN_GPS_IM, GPIO_FN_GPS_IS, GPIO_FN_GPS_QM, GPIO_FN_GPS_QS,
+	GPIO_FN_SIUBOMC, GPIO_FN_TPU2TO0,
+	GPIO_FN_SIUCKB, GPIO_FN_TPU2TO1,
+	GPIO_FN_SIUBOLR, GPIO_FN_BBIF2_TSYNC, GPIO_FN_TPU2TO2,
+	GPIO_FN_SIUBOBT, GPIO_FN_BBIF2_TSCK, GPIO_FN_TPU2TO3,
+	GPIO_FN_SIUBOSLD, GPIO_FN_BBIF2_TXD, GPIO_FN_TPU3TO0,
+	GPIO_FN_SIUBILR, GPIO_FN_TPU3TO1,
+	GPIO_FN_SIUBIBT, GPIO_FN_TPU3TO2,
+	GPIO_FN_SIUBISLD, GPIO_FN_TPU3TO3,
+	GPIO_FN_NMI, GPIO_FN_TPU4TO0,
+	GPIO_FN_DNPCM_M, GPIO_FN_TPU4TO1, GPIO_FN_TPU4TO2, GPIO_FN_TPU4TO3,
+	GPIO_FN_IRQ_TMPB,
+	GPIO_FN_PWEN, GPIO_FN_MFG1_OUT1,
+	GPIO_FN_OVCN, GPIO_FN_MFG1_IN1,
+	GPIO_FN_OVCN2, GPIO_FN_MFG1_IN2,
+
+	/* 49-3 (FN) */
+	GPIO_FN_RFSPO1, GPIO_FN_RFSPO2, GPIO_FN_RFSPO3, GPIO_FN_PORT93_VIO_CKO2,
+	GPIO_FN_USBTERM, GPIO_FN_EXTLP, GPIO_FN_IDIN,
+	GPIO_FN_SCIFA5_CTS, GPIO_FN_MFG0_IN1,
+	GPIO_FN_SCIFA5_RTS, GPIO_FN_MFG0_IN2,
+	GPIO_FN_SCIFA5_RXD,
+	GPIO_FN_SCIFA5_TXD,
+	GPIO_FN_SCIFA5_SCK, GPIO_FN_MFG0_OUT1,
+	GPIO_FN_A0_EA0, GPIO_FN_BS,
+	GPIO_FN_A14_EA14, GPIO_FN_PORT102_KEYOUT0,
+	GPIO_FN_A15_EA15, GPIO_FN_PORT103_KEYOUT1, GPIO_FN_DV_CLKOL,
+	GPIO_FN_A16_EA16, GPIO_FN_PORT104_KEYOUT2,
+	GPIO_FN_DV_VSYNCL, GPIO_FN_MSIOF0_SS1,
+	GPIO_FN_A17_EA17, GPIO_FN_PORT105_KEYOUT3,
+	GPIO_FN_DV_HSYNCL, GPIO_FN_MSIOF0_TSYNC,
+	GPIO_FN_A18_EA18, GPIO_FN_PORT106_KEYOUT4,
+	GPIO_FN_DV_DL0, GPIO_FN_MSIOF0_TSCK,
+	GPIO_FN_A19_EA19, GPIO_FN_PORT107_KEYOUT5,
+	GPIO_FN_DV_DL1, GPIO_FN_MSIOF0_TXD,
+	GPIO_FN_A20_EA20, GPIO_FN_PORT108_KEYIN0,
+	GPIO_FN_DV_DL2, GPIO_FN_MSIOF0_RSCK,
+	GPIO_FN_A21_EA21, GPIO_FN_PORT109_KEYIN1,
+	GPIO_FN_DV_DL3, GPIO_FN_MSIOF0_RSYNC,
+	GPIO_FN_A22_EA22, GPIO_FN_PORT110_KEYIN2,
+	GPIO_FN_DV_DL4, GPIO_FN_MSIOF0_MCK0,
+	GPIO_FN_A23_EA23, GPIO_FN_PORT111_KEYIN3,
+	GPIO_FN_DV_DL5, GPIO_FN_MSIOF0_MCK1,
+	GPIO_FN_A24_EA24, GPIO_FN_PORT112_KEYIN4,
+	GPIO_FN_DV_DL6, GPIO_FN_MSIOF0_RXD,
+	GPIO_FN_A25_EA25, GPIO_FN_PORT113_KEYIN5,
+	GPIO_FN_DV_DL7, GPIO_FN_MSIOF0_SS2,
+	GPIO_FN_A26, GPIO_FN_PORT113_KEYIN6, GPIO_FN_DV_CLKIL,
+	GPIO_FN_D0_ED0_NAF0, GPIO_FN_D1_ED1_NAF1, GPIO_FN_D2_ED2_NAF2,
+	GPIO_FN_D3_ED3_NAF3, GPIO_FN_D4_ED4_NAF4, GPIO_FN_D5_ED5_NAF5,
+	GPIO_FN_D6_ED6_NAF6, GPIO_FN_D7_ED7_NAF7, GPIO_FN_D8_ED8_NAF8,
+	GPIO_FN_D9_ED9_NAF9, GPIO_FN_D10_ED10_NAF10, GPIO_FN_D11_ED11_NAF11,
+	GPIO_FN_D12_ED12_NAF12, GPIO_FN_D13_ED13_NAF13,
+	GPIO_FN_D14_ED14_NAF14, GPIO_FN_D15_ED15_NAF15,
+	GPIO_FN_CS4, GPIO_FN_CS5A, GPIO_FN_CS5B, GPIO_FN_FCE1,
+	GPIO_FN_CS6B, GPIO_FN_XCS2, GPIO_FN_FCE0, GPIO_FN_CS6A,
+	GPIO_FN_DACK0, GPIO_FN_WAIT, GPIO_FN_DREQ0, GPIO_FN_RD_XRD,
+	GPIO_FN_A27, GPIO_FN_RDWR_XWE, GPIO_FN_WE0_XWR0_FWE,
+	GPIO_FN_WE1_XWR1, GPIO_FN_FRB, GPIO_FN_CKO,
+	GPIO_FN_NBRSTOUT, GPIO_FN_NBRST,
+
+	/* 49-4 (FN) */
+	GPIO_FN_RFSPO0, GPIO_FN_PORT146_VIO_CKO2, GPIO_FN_TSTMD,
+	GPIO_FN_VIO_VD, GPIO_FN_VIO_HD,
+	GPIO_FN_VIO_D0, GPIO_FN_VIO_D1, GPIO_FN_VIO_D2,
+	GPIO_FN_VIO_D3, GPIO_FN_VIO_D4, GPIO_FN_VIO_D5,
+	GPIO_FN_VIO_D6, GPIO_FN_VIO_D7, GPIO_FN_VIO_D8,
+	GPIO_FN_VIO_D9, GPIO_FN_VIO_D10, GPIO_FN_VIO_D11,
+	GPIO_FN_VIO_D12, GPIO_FN_VIO_D13, GPIO_FN_VIO_D14,
+	GPIO_FN_VIO_D15, GPIO_FN_VIO_CLK, GPIO_FN_VIO_FIELD,
+	GPIO_FN_VIO_CKO,
+	GPIO_FN_MFG3_IN1, GPIO_FN_MFG3_IN2,
+	GPIO_FN_M9_SLCD_A01, GPIO_FN_MFG3_OUT1, GPIO_FN_TPU0TO0,
+	GPIO_FN_M10_SLCD_CK1, GPIO_FN_MFG4_IN1, GPIO_FN_TPU0TO1,
+	GPIO_FN_M11_SLCD_SO1, GPIO_FN_MFG4_IN2, GPIO_FN_TPU0TO2,
+	GPIO_FN_M12_SLCD_CE1, GPIO_FN_MFG4_OUT1, GPIO_FN_TPU0TO3,
+	GPIO_FN_LCDD0, GPIO_FN_PORT175_KEYOUT0, GPIO_FN_DV_D0,
+	GPIO_FN_SIUCKA, GPIO_FN_MFG0_OUT2,
+	GPIO_FN_LCDD1, GPIO_FN_PORT176_KEYOUT1, GPIO_FN_DV_D1,
+	GPIO_FN_SIUAOLR, GPIO_FN_BBIF2_TSYNC1,
+	GPIO_FN_LCDD2, GPIO_FN_PORT177_KEYOUT2, GPIO_FN_DV_D2,
+	GPIO_FN_SIUAOBT, GPIO_FN_BBIF2_TSCK1,
+	GPIO_FN_LCDD3, GPIO_FN_PORT178_KEYOUT3, GPIO_FN_DV_D3,
+	GPIO_FN_SIUAOSLD, GPIO_FN_BBIF2_TXD1,
+	GPIO_FN_LCDD4, GPIO_FN_PORT179_KEYOUT4, GPIO_FN_DV_D4,
+	GPIO_FN_SIUAISPD, GPIO_FN_MFG1_OUT2,
+	GPIO_FN_LCDD5, GPIO_FN_PORT180_KEYOUT5, GPIO_FN_DV_D5,
+	GPIO_FN_SIUAILR, GPIO_FN_MFG2_OUT2,
+	GPIO_FN_LCDD6, GPIO_FN_DV_D6,
+	GPIO_FN_SIUAIBT, GPIO_FN_MFG3_OUT2, GPIO_FN_XWR2,
+	GPIO_FN_LCDD7, GPIO_FN_DV_D7,
+	GPIO_FN_SIUAISLD, GPIO_FN_MFG4_OUT2, GPIO_FN_XWR3,
+	GPIO_FN_LCDD8, GPIO_FN_DV_D8, GPIO_FN_D16, GPIO_FN_ED16,
+	GPIO_FN_LCDD9, GPIO_FN_DV_D9, GPIO_FN_D17, GPIO_FN_ED17,
+	GPIO_FN_LCDD10, GPIO_FN_DV_D10, GPIO_FN_D18, GPIO_FN_ED18,
+	GPIO_FN_LCDD11, GPIO_FN_DV_D11, GPIO_FN_D19, GPIO_FN_ED19,
+	GPIO_FN_LCDD12, GPIO_FN_DV_D12, GPIO_FN_D20, GPIO_FN_ED20,
+	GPIO_FN_LCDD13, GPIO_FN_DV_D13, GPIO_FN_D21, GPIO_FN_ED21,
+	GPIO_FN_LCDD14, GPIO_FN_DV_D14, GPIO_FN_D22, GPIO_FN_ED22,
+	GPIO_FN_LCDD15, GPIO_FN_DV_D15, GPIO_FN_D23, GPIO_FN_ED23,
+	GPIO_FN_LCDD16, GPIO_FN_DV_HSYNC, GPIO_FN_D24, GPIO_FN_ED24,
+	GPIO_FN_LCDD17, GPIO_FN_DV_VSYNC, GPIO_FN_D25, GPIO_FN_ED25,
+	GPIO_FN_LCDD18, GPIO_FN_DREQ2, GPIO_FN_MSIOF0L_TSCK,
+	GPIO_FN_D26, GPIO_FN_ED26,
+	GPIO_FN_LCDD19, GPIO_FN_MSIOF0L_TSYNC,
+	GPIO_FN_D27, GPIO_FN_ED27,
+	GPIO_FN_LCDD20, GPIO_FN_TS_SPSYNC1, GPIO_FN_MSIOF0L_MCK0,
+	GPIO_FN_D28, GPIO_FN_ED28,
+	GPIO_FN_LCDD21, GPIO_FN_TS_SDAT1, GPIO_FN_MSIOF0L_MCK1,
+	GPIO_FN_D29, GPIO_FN_ED29,
+	GPIO_FN_LCDD22, GPIO_FN_TS_SDEN1, GPIO_FN_MSIOF0L_SS1,
+	GPIO_FN_D30, GPIO_FN_ED30,
+	GPIO_FN_LCDD23, GPIO_FN_TS_SCK1, GPIO_FN_MSIOF0L_SS2,
+	GPIO_FN_D31, GPIO_FN_ED31,
+	GPIO_FN_LCDDCK, GPIO_FN_LCDWR, GPIO_FN_DV_CKO, GPIO_FN_SIUAOSPD,
+	GPIO_FN_LCDRD, GPIO_FN_DACK2, GPIO_FN_MSIOF0L_RSYNC,
+
+
+	/* 49-5 (FN) */
+	GPIO_FN_LCDHSYN, GPIO_FN_LCDCS, GPIO_FN_LCDCS2, GPIO_FN_DACK3,
+	GPIO_FN_LCDDISP, GPIO_FN_LCDRS, GPIO_FN_DREQ3, GPIO_FN_MSIOF0L_RSCK,
+	GPIO_FN_LCDCSYN, GPIO_FN_LCDCSYN2, GPIO_FN_DV_CKI,
+	GPIO_FN_LCDLCLK, GPIO_FN_DREQ1, GPIO_FN_MSIOF0L_RXD,
+	GPIO_FN_LCDDON, GPIO_FN_LCDDON2, GPIO_FN_DACK1, GPIO_FN_MSIOF0L_TXD,
+	GPIO_FN_VIO_DR0, GPIO_FN_VIO_DR1, GPIO_FN_VIO_DR2, GPIO_FN_VIO_DR3,
+	GPIO_FN_VIO_DR4, GPIO_FN_VIO_DR5, GPIO_FN_VIO_DR6, GPIO_FN_VIO_DR7,
+	GPIO_FN_VIO_VDR, GPIO_FN_VIO_HDR,
+	GPIO_FN_VIO_CLKR, GPIO_FN_VIO_CKOR,
+	GPIO_FN_SCIFA1_TXD, GPIO_FN_GPS_PGFA0,
+	GPIO_FN_SCIFA1_SCK, GPIO_FN_GPS_PGFA1,
+	GPIO_FN_SCIFA1_RTS, GPIO_FN_GPS_EPPSINMON,
+	GPIO_FN_SCIFA1_RXD, GPIO_FN_SCIFA1_CTS,
+	GPIO_FN_MSIOF1_TXD, GPIO_FN_SCIFA1_TXD2, GPIO_FN_GPS_TXD,
+	GPIO_FN_MSIOF1_TSYNC, GPIO_FN_SCIFA1_CTS2, GPIO_FN_I2C_SDA2,
+	GPIO_FN_MSIOF1_TSCK, GPIO_FN_SCIFA1_SCK2,
+	GPIO_FN_MSIOF1_RXD, GPIO_FN_SCIFA1_RXD2, GPIO_FN_GPS_RXD,
+	GPIO_FN_MSIOF1_RSCK, GPIO_FN_SCIFA1_RTS2,
+	GPIO_FN_MSIOF1_RSYNC, GPIO_FN_I2C_SCL2,
+	GPIO_FN_MSIOF1_MCK0, GPIO_FN_MSIOF1_MCK1,
+	GPIO_FN_MSIOF1_SS1, GPIO_FN_EDBGREQ3,
+	GPIO_FN_MSIOF1_SS2,
+	GPIO_FN_PORT236_IROUT, GPIO_FN_IRDA_OUT,
+	GPIO_FN_IRDA_IN, GPIO_FN_IRDA_FIRSEL,
+	GPIO_FN_TPU1TO0, GPIO_FN_TS_SPSYNC3,
+	GPIO_FN_TPU1TO1, GPIO_FN_TS_SDAT3,
+	GPIO_FN_TPU1TO2, GPIO_FN_TS_SDEN3, GPIO_FN_PORT241_MSIOF2_SS1,
+	GPIO_FN_TPU1TO3, GPIO_FN_PORT242_MSIOF2_TSCK,
+	GPIO_FN_M13_BSW, GPIO_FN_PORT243_MSIOF2_TSYNC,
+	GPIO_FN_M14_GSW, GPIO_FN_PORT244_MSIOF2_TXD,
+	GPIO_FN_PORT245_IROUT, GPIO_FN_M15_RSW,
+	GPIO_FN_SOUT3, GPIO_FN_SCIFA2_TXD1,
+	GPIO_FN_SIN3, GPIO_FN_SCIFA2_RXD1,
+	GPIO_FN_XRTS3, GPIO_FN_SCIFA2_RTS1, GPIO_FN_PORT248_MSIOF2_SS2,
+	GPIO_FN_XCTS3, GPIO_FN_SCIFA2_CTS1, GPIO_FN_PORT249_MSIOF2_RXD,
+	GPIO_FN_DINT, GPIO_FN_SCIFA2_SCK1, GPIO_FN_TS_SCK3,
+	GPIO_FN_SDHICLK0, GPIO_FN_TCK2,
+	GPIO_FN_SDHICD0,
+	GPIO_FN_SDHID0_0, GPIO_FN_TMS2,
+	GPIO_FN_SDHID0_1, GPIO_FN_TDO2,
+	GPIO_FN_SDHID0_2, GPIO_FN_TDI2,
+	GPIO_FN_SDHID0_3, GPIO_FN_RTCK2,
+
+	/* 49-6 (FN) */
+	GPIO_FN_SDHICMD0, GPIO_FN_TRST2,
+	GPIO_FN_SDHIWP0, GPIO_FN_EDBGREQ2,
+	GPIO_FN_SDHICLK1, GPIO_FN_TCK3,
+	GPIO_FN_SDHID1_0, GPIO_FN_M11_SLCD_SO2,
+	GPIO_FN_TS_SPSYNC2, GPIO_FN_TMS3,
+	GPIO_FN_SDHID1_1, GPIO_FN_M9_SLCD_AO2,
+	GPIO_FN_TS_SDAT2, GPIO_FN_TDO3,
+	GPIO_FN_SDHID1_2, GPIO_FN_M10_SLCD_CK2,
+	GPIO_FN_TS_SDEN2, GPIO_FN_TDI3,
+	GPIO_FN_SDHID1_3, GPIO_FN_M12_SLCD_CE2,
+	GPIO_FN_TS_SCK2, GPIO_FN_RTCK3,
+	GPIO_FN_SDHICMD1, GPIO_FN_TRST3,
+	GPIO_FN_SDHICLK2, GPIO_FN_SCIFB_SCK,
+	GPIO_FN_SDHID2_0, GPIO_FN_SCIFB_TXD,
+	GPIO_FN_SDHID2_1, GPIO_FN_SCIFB_CTS,
+	GPIO_FN_SDHID2_2, GPIO_FN_SCIFB_RXD,
+	GPIO_FN_SDHID2_3, GPIO_FN_SCIFB_RTS,
+	GPIO_FN_SDHICMD2,
+	GPIO_FN_RESETOUTS,
+	GPIO_FN_DIVLOCK,
+};
+
+#endif /* __ASM_SH7367_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/include/mach/sh7372.h
new file mode 100644
index 000000000000..dc34f00c56b8
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/sh7372.h
@@ -0,0 +1,434 @@
+/*
+ * Copyright (C) 2010 Renesas Solutions Corp.
+ *
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef __ASM_SH7372_H__
+#define __ASM_SH7372_H__
+
+/*
+ * Pin Function Controller:
+ *	GPIO_FN_xx - GPIO used to select pin function
+ *	GPIO_PORTxx - GPIO mapped to real I/O pin on CPU
+ */
+enum {
+	/* PORT */
+	GPIO_PORT0, GPIO_PORT1, GPIO_PORT2, GPIO_PORT3, GPIO_PORT4,
+	GPIO_PORT5, GPIO_PORT6, GPIO_PORT7, GPIO_PORT8, GPIO_PORT9,
+
+	GPIO_PORT10, GPIO_PORT11, GPIO_PORT12, GPIO_PORT13, GPIO_PORT14,
+	GPIO_PORT15, GPIO_PORT16, GPIO_PORT17, GPIO_PORT18, GPIO_PORT19,
+
+	GPIO_PORT20, GPIO_PORT21, GPIO_PORT22, GPIO_PORT23, GPIO_PORT24,
+	GPIO_PORT25, GPIO_PORT26, GPIO_PORT27, GPIO_PORT28, GPIO_PORT29,
+
+	GPIO_PORT30, GPIO_PORT31, GPIO_PORT32, GPIO_PORT33, GPIO_PORT34,
+	GPIO_PORT35, GPIO_PORT36, GPIO_PORT37, GPIO_PORT38, GPIO_PORT39,
+
+	GPIO_PORT40, GPIO_PORT41, GPIO_PORT42, GPIO_PORT43, GPIO_PORT44,
+	GPIO_PORT45, GPIO_PORT46, GPIO_PORT47, GPIO_PORT48, GPIO_PORT49,
+
+	GPIO_PORT50, GPIO_PORT51, GPIO_PORT52, GPIO_PORT53, GPIO_PORT54,
+	GPIO_PORT55, GPIO_PORT56, GPIO_PORT57, GPIO_PORT58, GPIO_PORT59,
+
+	GPIO_PORT60, GPIO_PORT61, GPIO_PORT62, GPIO_PORT63, GPIO_PORT64,
+	GPIO_PORT65, GPIO_PORT66, GPIO_PORT67, GPIO_PORT68, GPIO_PORT69,
+
+	GPIO_PORT70, GPIO_PORT71, GPIO_PORT72, GPIO_PORT73, GPIO_PORT74,
+	GPIO_PORT75, GPIO_PORT76, GPIO_PORT77, GPIO_PORT78, GPIO_PORT79,
+
+	GPIO_PORT80, GPIO_PORT81, GPIO_PORT82, GPIO_PORT83, GPIO_PORT84,
+	GPIO_PORT85, GPIO_PORT86, GPIO_PORT87, GPIO_PORT88, GPIO_PORT89,
+
+	GPIO_PORT90, GPIO_PORT91, GPIO_PORT92, GPIO_PORT93, GPIO_PORT94,
+	GPIO_PORT95, GPIO_PORT96, GPIO_PORT97, GPIO_PORT98, GPIO_PORT99,
+
+	GPIO_PORT100, GPIO_PORT101, GPIO_PORT102, GPIO_PORT103, GPIO_PORT104,
+	GPIO_PORT105, GPIO_PORT106, GPIO_PORT107, GPIO_PORT108, GPIO_PORT109,
+
+	GPIO_PORT110, GPIO_PORT111, GPIO_PORT112, GPIO_PORT113, GPIO_PORT114,
+	GPIO_PORT115, GPIO_PORT116, GPIO_PORT117, GPIO_PORT118, GPIO_PORT119,
+
+	GPIO_PORT120, GPIO_PORT121, GPIO_PORT122, GPIO_PORT123, GPIO_PORT124,
+	GPIO_PORT125, GPIO_PORT126, GPIO_PORT127, GPIO_PORT128, GPIO_PORT129,
+
+	GPIO_PORT130, GPIO_PORT131, GPIO_PORT132, GPIO_PORT133, GPIO_PORT134,
+	GPIO_PORT135, GPIO_PORT136, GPIO_PORT137, GPIO_PORT138, GPIO_PORT139,
+
+	GPIO_PORT140, GPIO_PORT141, GPIO_PORT142, GPIO_PORT143, GPIO_PORT144,
+	GPIO_PORT145, GPIO_PORT146, GPIO_PORT147, GPIO_PORT148, GPIO_PORT149,
+
+	GPIO_PORT150, GPIO_PORT151, GPIO_PORT152, GPIO_PORT153, GPIO_PORT154,
+	GPIO_PORT155, GPIO_PORT156, GPIO_PORT157, GPIO_PORT158, GPIO_PORT159,
+
+	GPIO_PORT160, GPIO_PORT161, GPIO_PORT162, GPIO_PORT163, GPIO_PORT164,
+	GPIO_PORT165, GPIO_PORT166, GPIO_PORT167, GPIO_PORT168, GPIO_PORT169,
+
+	GPIO_PORT170, GPIO_PORT171, GPIO_PORT172, GPIO_PORT173, GPIO_PORT174,
+	GPIO_PORT175, GPIO_PORT176, GPIO_PORT177, GPIO_PORT178, GPIO_PORT179,
+
+	GPIO_PORT180, GPIO_PORT181, GPIO_PORT182, GPIO_PORT183, GPIO_PORT184,
+	GPIO_PORT185, GPIO_PORT186, GPIO_PORT187, GPIO_PORT188, GPIO_PORT189,
+
+	GPIO_PORT190,
+
+	/* IRQ */
+	GPIO_FN_IRQ0_6,		/* PORT   6 */
+	GPIO_FN_IRQ0_162,	/* PORT 162 */
+	GPIO_FN_IRQ1,		/* PORT  12 */
+	GPIO_FN_IRQ2_4,		/* PORT   4 */
+	GPIO_FN_IRQ2_5,		/* PORT   5 */
+	GPIO_FN_IRQ3_8,		/* PORT   8 */
+	GPIO_FN_IRQ3_16,	/* PORT  16 */
+	GPIO_FN_IRQ4_17,	/* PORT  17 */
+	GPIO_FN_IRQ4_163,	/* PORT 163 */
+	GPIO_FN_IRQ5,		/* PORT  18 */
+	GPIO_FN_IRQ6_39,	/* PORT  39 */
+	GPIO_FN_IRQ6_164,	/* PORT 164 */
+	GPIO_FN_IRQ7_40,	/* PORT  40 */
+	GPIO_FN_IRQ7_167,	/* PORT 167 */
+	GPIO_FN_IRQ8_41,	/* PORT  41 */
+	GPIO_FN_IRQ8_168,	/* PORT 168 */
+	GPIO_FN_IRQ9_42,	/* PORT  42 */
+	GPIO_FN_IRQ9_169,	/* PORT 169 */
+	GPIO_FN_IRQ10,		/* PORT  65 */
+	GPIO_FN_IRQ11,		/* PORT  67 */
+	GPIO_FN_IRQ12_80,	/* PORT  80 */
+	GPIO_FN_IRQ12_137,	/* PORT 137 */
+	GPIO_FN_IRQ13_81,	/* PORT  81 */
+	GPIO_FN_IRQ13_145,	/* PORT 145 */
+	GPIO_FN_IRQ14_82,	/* PORT  82 */
+	GPIO_FN_IRQ14_146,	/* PORT 146 */
+	GPIO_FN_IRQ15_83,	/* PORT  83 */
+	GPIO_FN_IRQ15_147,	/* PORT 147 */
+	GPIO_FN_IRQ16_84,	/* PORT  84 */
+	GPIO_FN_IRQ16_170,	/* PORT 170 */
+	GPIO_FN_IRQ17,		/* PORT  85 */
+	GPIO_FN_IRQ18,		/* PORT  86 */
+	GPIO_FN_IRQ19,		/* PORT  87 */
+	GPIO_FN_IRQ20,		/* PORT  92 */
+	GPIO_FN_IRQ21,		/* PORT  93 */
+	GPIO_FN_IRQ22,		/* PORT  94 */
+	GPIO_FN_IRQ23,		/* PORT  95 */
+	GPIO_FN_IRQ24,		/* PORT 112 */
+	GPIO_FN_IRQ25,		/* PORT 119 */
+	GPIO_FN_IRQ26_121,	/* PORT 121 */
+	GPIO_FN_IRQ26_172,	/* PORT 172 */
+	GPIO_FN_IRQ27_122,	/* PORT 122 */
+	GPIO_FN_IRQ27_180,	/* PORT 180 */
+	GPIO_FN_IRQ28_123,	/* PORT 123 */
+	GPIO_FN_IRQ28_181,	/* PORT 181 */
+	GPIO_FN_IRQ29_129,	/* PORT 129 */
+	GPIO_FN_IRQ29_182,	/* PORT 182 */
+	GPIO_FN_IRQ30_130,	/* PORT 130 */
+	GPIO_FN_IRQ30_183,	/* PORT 183 */
+	GPIO_FN_IRQ31_138,	/* PORT 138 */
+	GPIO_FN_IRQ31_184,	/* PORT 184 */
+
+	/*
+	 * MSIOF0	(PORT 36, 37, 38, 39
+	 * 		      40, 41, 42, 43, 44, 45)
+	 */
+	GPIO_FN_MSIOF0_TSYNC,	GPIO_FN_MSIOF0_TSCK,
+	GPIO_FN_MSIOF0_RXD,	GPIO_FN_MSIOF0_RSCK,
+	GPIO_FN_MSIOF0_RSYNC,	GPIO_FN_MSIOF0_MCK0,
+	GPIO_FN_MSIOF0_MCK1,	GPIO_FN_MSIOF0_SS1,
+	GPIO_FN_MSIOF0_SS2,	GPIO_FN_MSIOF0_TXD,
+
+	/*
+	 * MSIOF1	(PORT 39, 40, 41, 42, 43, 44
+	 * 		      84, 85, 86, 87, 88, 89, 90, 91, 92, 93)
+	 */
+	GPIO_FN_MSIOF1_TSCK_39,	GPIO_FN_MSIOF1_TSYNC_40,
+	GPIO_FN_MSIOF1_TSCK_88,	GPIO_FN_MSIOF1_TSYNC_89,
+	GPIO_FN_MSIOF1_TXD_41,	GPIO_FN_MSIOF1_RXD_42,
+	GPIO_FN_MSIOF1_TXD_90,	GPIO_FN_MSIOF1_RXD_91,
+	GPIO_FN_MSIOF1_SS1_43,	GPIO_FN_MSIOF1_SS2_44,
+	GPIO_FN_MSIOF1_SS1_92,	GPIO_FN_MSIOF1_SS2_93,
+	GPIO_FN_MSIOF1_RSCK,	GPIO_FN_MSIOF1_RSYNC,
+	GPIO_FN_MSIOF1_MCK0,	GPIO_FN_MSIOF1_MCK1,
+
+	/*
+	 * MSIOF2	(PORT 134, 135, 136, 137, 138, 139
+	 *		      148, 149, 150, 151)
+	 */
+	GPIO_FN_MSIOF2_RSCK,	GPIO_FN_MSIOF2_RSYNC,
+	GPIO_FN_MSIOF2_MCK0,	GPIO_FN_MSIOF2_MCK1,
+	GPIO_FN_MSIOF2_SS1,	GPIO_FN_MSIOF2_SS2,
+	GPIO_FN_MSIOF2_TSYNC,	GPIO_FN_MSIOF2_TSCK,
+	GPIO_FN_MSIOF2_RXD,	GPIO_FN_MSIOF2_TXD,
+
+	/* MSIOF3	(PORT 76, 77, 78, 79, 80, 81, 82, 83) */
+	GPIO_FN_BBIF1_RXD,	GPIO_FN_BBIF1_TSYNC,
+	GPIO_FN_BBIF1_TSCK,	GPIO_FN_BBIF1_TXD,
+	GPIO_FN_BBIF1_RSCK,	GPIO_FN_BBIF1_RSYNC,
+	GPIO_FN_BBIF1_FLOW,	GPIO_FN_BB_RX_FLOW_N,
+
+	/* MSIOF4	(PORT 0, 1, 2, 3) */
+	GPIO_FN_BBIF2_TSCK1,	GPIO_FN_BBIF2_TSYNC1,
+	GPIO_FN_BBIF2_TXD1,	GPIO_FN_BBIF2_RXD,
+
+	/* FSI		(PORT 4, 5, 6, 7, 8, 9, 10, 11, 15) */
+	GPIO_FN_FSIACK,		GPIO_FN_FSIBCK,
+	GPIO_FN_FSIAILR,	GPIO_FN_FSIAIBT,
+	GPIO_FN_FSIAISLD,	GPIO_FN_FSIAOMC,
+	GPIO_FN_FSIAOLR,	GPIO_FN_FSIAOBT,
+	GPIO_FN_FSIAOSLD,	GPIO_FN_FSIASPDIF_11,
+	GPIO_FN_FSIASPDIF_15,
+
+	/* FMSI		(PORT 12, 13, 14, 15, 16, 17, 18, 65) */
+	GPIO_FN_FMSOCK,		GPIO_FN_FMSOOLR,
+	GPIO_FN_FMSIOLR,	GPIO_FN_FMSOOBT,
+	GPIO_FN_FMSIOBT,	GPIO_FN_FMSOSLD,
+	GPIO_FN_FMSOILR,	GPIO_FN_FMSIILR,
+	GPIO_FN_FMSOIBT,	GPIO_FN_FMSIIBT,
+	GPIO_FN_FMSISLD,	GPIO_FN_FMSICK,
+
+	/* SCIFA0	(PORT 152, 153, 156, 157, 158) */
+	GPIO_FN_SCIFA0_TXD,	GPIO_FN_SCIFA0_RXD,
+	GPIO_FN_SCIFA0_SCK,	GPIO_FN_SCIFA0_RTS,
+	GPIO_FN_SCIFA0_CTS,
+
+	/* SCIFA1	(PORT 154, 155, 159, 160, 161) */
+	GPIO_FN_SCIFA1_TXD,	GPIO_FN_SCIFA1_RXD,
+	GPIO_FN_SCIFA1_SCK,	GPIO_FN_SCIFA1_RTS,
+	GPIO_FN_SCIFA1_CTS,
+
+	/* SCIFA2	(PORT 94, 95, 96, 97, 98) */
+	GPIO_FN_SCIFA2_CTS1,	GPIO_FN_SCIFA2_RTS1,
+	GPIO_FN_SCIFA2_TXD1,	GPIO_FN_SCIFA2_RXD1,
+	GPIO_FN_SCIFA2_SCK1,
+
+	/* SCIFA3	(PORT 43, 44,
+			     140, 141, 142, 143, 144) */
+	GPIO_FN_SCIFA3_CTS_43,	GPIO_FN_SCIFA3_CTS_140,
+	GPIO_FN_SCIFA3_RTS_44,	GPIO_FN_SCIFA3_RTS_141,
+	GPIO_FN_SCIFA3_SCK,	GPIO_FN_SCIFA3_TXD,
+	GPIO_FN_SCIFA3_RXD,
+
+	/* SCIFA4	(PORT 5, 6) */
+	GPIO_FN_SCIFA4_RXD,	GPIO_FN_SCIFA4_TXD,
+
+	/* SCIFA5	(PORT 8, 12) */
+	GPIO_FN_SCIFA5_RXD,	GPIO_FN_SCIFA5_TXD,
+
+	/* SCIFB	(PORT 162, 163, 164, 165, 166) */
+	GPIO_FN_SCIFB_SCK,	GPIO_FN_SCIFB_RTS,
+	GPIO_FN_SCIFB_CTS,	GPIO_FN_SCIFB_TXD,
+	GPIO_FN_SCIFB_RXD,
+
+	/*
+	 * CEU		(PORT 16, 17,
+	 *		      100, 101, 102, 103, 104, 105, 106, 107, 108, 109,
+	 *		      110, 111, 112, 113, 114, 115, 116, 117, 118, 119,
+	 *		      120)
+	 */
+	GPIO_FN_VIO_HD,		GPIO_FN_VIO_CKO1,	GPIO_FN_VIO_CKO2,
+	GPIO_FN_VIO_VD,		GPIO_FN_VIO_CLK,	GPIO_FN_VIO_FIELD,
+	GPIO_FN_VIO_CKO,
+	GPIO_FN_VIO_D0,		GPIO_FN_VIO_D1,		GPIO_FN_VIO_D2,
+	GPIO_FN_VIO_D3,		GPIO_FN_VIO_D4,		GPIO_FN_VIO_D5,
+	GPIO_FN_VIO_D6,		GPIO_FN_VIO_D7,		GPIO_FN_VIO_D8,
+	GPIO_FN_VIO_D9,		GPIO_FN_VIO_D10,	GPIO_FN_VIO_D11,
+	GPIO_FN_VIO_D12,	GPIO_FN_VIO_D13,	GPIO_FN_VIO_D14,
+	GPIO_FN_VIO_D15,
+
+	/* USB0		(PORT 113, 114, 115, 116, 117, 167) */
+	GPIO_FN_IDIN_0,		GPIO_FN_EXTLP_0,
+	GPIO_FN_OVCN2_0,	GPIO_FN_PWEN_0,
+	GPIO_FN_OVCN_0,		GPIO_FN_VBUS0_0,
+
+	/* USB1		(PORT 18, 113, 114, 115, 116, 117, 138, 162, 168) */
+	GPIO_FN_IDIN_1_18,	GPIO_FN_IDIN_1_113,
+	GPIO_FN_PWEN_1_115,	GPIO_FN_PWEN_1_138,
+	GPIO_FN_OVCN_1_114,	GPIO_FN_OVCN_1_162,
+	GPIO_FN_EXTLP_1,	GPIO_FN_OVCN2_1,
+	GPIO_FN_VBUS0_1,
+
+	/* GPIO		(PORT 41, 42, 43, 44) */
+	GPIO_FN_GPI0,	GPIO_FN_GPI1,	GPIO_FN_GPO0,	GPIO_FN_GPO1,
+
+	/*
+	 * BSC		(PORT 19,
+	 *		      20, 21, 22, 25, 26, 27, 28, 29,
+	 *		      30, 31, 32, 33, 34, 35, 36, 37, 38, 39,
+	 *		      40, 41, 42, 43, 44, 45,
+	 *		      62, 63, 64, 65, 66, 67,
+	 *		      71, 72, 74, 75)
+	 */
+	GPIO_FN_BS,	GPIO_FN_WE1,
+	GPIO_FN_CKO,	GPIO_FN_WAIT,	GPIO_FN_RDWR,
+
+	GPIO_FN_A0,	GPIO_FN_A1,	GPIO_FN_A2,	GPIO_FN_A3,
+	GPIO_FN_A6,	GPIO_FN_A7,	GPIO_FN_A8,	GPIO_FN_A9,
+	GPIO_FN_A10,	GPIO_FN_A11,	GPIO_FN_A12,	GPIO_FN_A13,
+	GPIO_FN_A14,	GPIO_FN_A15,	GPIO_FN_A16,	GPIO_FN_A17,
+	GPIO_FN_A18,	GPIO_FN_A19,	GPIO_FN_A20,	GPIO_FN_A21,
+	GPIO_FN_A22,	GPIO_FN_A23,	GPIO_FN_A24,	GPIO_FN_A25,
+	GPIO_FN_A26,
+
+	GPIO_FN_CS0,	GPIO_FN_CS2,	GPIO_FN_CS4,
+	GPIO_FN_CS5A,	GPIO_FN_CS5B,	GPIO_FN_CS6A,
+
+	/*
+	 * BSC/FLCTL		(PORT 23, 24,
+	 *			      46, 47, 48, 49,
+	 *			      50, 51, 52, 53, 54, 55, 56, 57, 58, 59,
+	 *			      60, 61, 69, 70)
+	 */
+	GPIO_FN_RD_FSC,		GPIO_FN_WE0_FWE,
+	GPIO_FN_A4_FOE,		GPIO_FN_A5_FCDE,
+	GPIO_FN_D0_NAF0,	GPIO_FN_D1_NAF1,	GPIO_FN_D2_NAF2,
+	GPIO_FN_D3_NAF3,	GPIO_FN_D4_NAF4,	GPIO_FN_D5_NAF5,
+	GPIO_FN_D6_NAF6,	GPIO_FN_D7_NAF7,	GPIO_FN_D8_NAF8,
+	GPIO_FN_D9_NAF9,	GPIO_FN_D10_NAF10,	GPIO_FN_D11_NAF11,
+	GPIO_FN_D12_NAF12,	GPIO_FN_D13_NAF13,	GPIO_FN_D14_NAF14,
+	GPIO_FN_D15_NAF15,
+
+	/*
+	 * MMCIF(1)		(PORT 84, 85, 86, 87, 88, 89,
+	 *			      90, 91, 92, 99)
+	 */
+	GPIO_FN_MMCD0_0,	GPIO_FN_MMCD0_1,	GPIO_FN_MMCD0_2,
+	GPIO_FN_MMCD0_3,	GPIO_FN_MMCD0_4,	GPIO_FN_MMCD0_5,
+	GPIO_FN_MMCD0_6,	GPIO_FN_MMCD0_7,
+	GPIO_FN_MMCCMD0,	GPIO_FN_MMCCLK0,
+
+	/* MMCIF(2)		(PORT 54, 55, 56, 57, 58, 59, 60, 61, 66, 67) */
+	GPIO_FN_MMCD1_0,	GPIO_FN_MMCD1_1,	GPIO_FN_MMCD1_2,
+	GPIO_FN_MMCD1_3,	GPIO_FN_MMCD1_4,	GPIO_FN_MMCD1_5,
+	GPIO_FN_MMCD1_6,	GPIO_FN_MMCD1_7,
+	GPIO_FN_MMCCLK1,	GPIO_FN_MMCCMD1,
+
+	/* SPU2		(PORT 65) */
+	GPIO_FN_VINT_I,
+
+	/* FLCTL	(PORT 66, 68, 73) */
+	GPIO_FN_FCE1,	GPIO_FN_FCE0,	GPIO_FN_FRB,
+
+	/* HSI		(PORT 76, 77, 78, 79, 80, 81, 82, 83) */
+	GPIO_FN_GP_RX_FLAG,	GPIO_FN_GP_RX_DATA,	GPIO_FN_GP_TX_READY,
+	GPIO_FN_GP_RX_WAKE,	GPIO_FN_MP_TX_FLAG,	GPIO_FN_MP_TX_DATA,
+	GPIO_FN_MP_RX_READY,	GPIO_FN_MP_TX_WAKE,
+
+	/*
+	 * MFI		(PORT 76, 77, 78, 79,
+	 *		      80, 81, 82, 83, 84, 85, 86, 87, 88, 89,
+	 *		      90, 91, 92, 93, 94, 95, 96, 97, 98, 99)
+	 */
+	GPIO_FN_MFIv6,	/* see MSEL4CR 6 */
+	GPIO_FN_MFIv4,	/* see MSEL4CR 6 */
+
+	GPIO_FN_MEMC_CS0,		GPIO_FN_MEMC_BUSCLK_MEMC_A0,
+	GPIO_FN_MEMC_CS1_MEMC_A1,	GPIO_FN_MEMC_ADV_MEMC_DREQ0,
+	GPIO_FN_MEMC_WAIT_MEMC_DREQ1,	GPIO_FN_MEMC_NOE,
+	GPIO_FN_MEMC_NWE,		GPIO_FN_MEMC_INT,
+
+	GPIO_FN_MEMC_AD0,	GPIO_FN_MEMC_AD1,	GPIO_FN_MEMC_AD2,
+	GPIO_FN_MEMC_AD3,	GPIO_FN_MEMC_AD4,	GPIO_FN_MEMC_AD5,
+	GPIO_FN_MEMC_AD6,	GPIO_FN_MEMC_AD7,	GPIO_FN_MEMC_AD8,
+	GPIO_FN_MEMC_AD9,	GPIO_FN_MEMC_AD10,	GPIO_FN_MEMC_AD11,
+	GPIO_FN_MEMC_AD12,	GPIO_FN_MEMC_AD13,	GPIO_FN_MEMC_AD14,
+	GPIO_FN_MEMC_AD15,
+
+	/* SIM		(PORT 94, 95, 98) */
+	GPIO_FN_SIM_RST,	GPIO_FN_SIM_CLK,	GPIO_FN_SIM_D,
+
+	/* TPU		(PORT 93, 99, 112, 160, 161) */
+	GPIO_FN_TPU0TO0,	GPIO_FN_TPU0TO1,
+	GPIO_FN_TPU0TO2_93,	GPIO_FN_TPU0TO2_99,
+	GPIO_FN_TPU0TO3,
+
+	/* I2C2		(PORT 110, 111) */
+	GPIO_FN_I2C_SCL2,	GPIO_FN_I2C_SDA2,
+
+	/* I2C3(1)	(PORT 114, 115) */
+	GPIO_FN_I2C_SCL3,	GPIO_FN_I2C_SDA3,
+
+	/* I2C3(2)	(PORT 137, 145) */
+	GPIO_FN_I2C_SCL3S,	GPIO_FN_I2C_SDA3S,
+
+	/* I2C4(2)	(PORT 116, 117) */
+	GPIO_FN_I2C_SCL4,	GPIO_FN_I2C_SDA4,
+
+	/* I2C4(2)	(PORT 146, 147) */
+	GPIO_FN_I2C_SCL4S,	GPIO_FN_I2C_SDA4S,
+
+	/*
+	 * KEYSC	(PORT 121, 122, 123, 124, 125, 126, 127, 128, 129,
+	 *		      130, 131, 132, 133, 134, 135, 136)
+	 */
+	GPIO_FN_KEYOUT0,	GPIO_FN_KEYIN0_121,	GPIO_FN_KEYIN0_136,
+	GPIO_FN_KEYOUT1,	GPIO_FN_KEYIN1_122,	GPIO_FN_KEYIN1_135,
+	GPIO_FN_KEYOUT2,	GPIO_FN_KEYIN2_123,	GPIO_FN_KEYIN2_134,
+	GPIO_FN_KEYOUT3,	GPIO_FN_KEYIN3_124,	GPIO_FN_KEYIN3_133,
+	GPIO_FN_KEYOUT4,	GPIO_FN_KEYIN4,
+	GPIO_FN_KEYOUT5,	GPIO_FN_KEYIN5,
+	GPIO_FN_KEYOUT6,	GPIO_FN_KEYIN6,
+	GPIO_FN_KEYOUT7,	GPIO_FN_KEYIN7,
+
+	/*
+	 * LCDC		(PORT      121, 122, 123, 124, 125, 126, 127, 128, 129,
+	 *		      130, 131, 132, 133, 134, 135, 136, 137, 138, 139,
+	 *		      140, 141, 142, 143, 144, 145, 146, 147, 148, 149,
+	 *		      150, 151)
+	 */
+	GPIO_FN_LCDC0_SELECT, /* LCDC 0 */
+	GPIO_FN_LCDC1_SELECT, /* LCDC 1 */
+	GPIO_FN_LCDHSYN,	GPIO_FN_LCDCS,	GPIO_FN_LCDVSYN,
+	GPIO_FN_LCDDCK,		GPIO_FN_LCDWR,	GPIO_FN_LCDRD,
+	GPIO_FN_LCDDISP,	GPIO_FN_LCDRS,	GPIO_FN_LCDLCLK,
+	GPIO_FN_LCDDON,
+
+	GPIO_FN_LCDD0,	GPIO_FN_LCDD1,	GPIO_FN_LCDD2,	GPIO_FN_LCDD3,
+	GPIO_FN_LCDD4,	GPIO_FN_LCDD5,	GPIO_FN_LCDD6,	GPIO_FN_LCDD7,
+	GPIO_FN_LCDD8,	GPIO_FN_LCDD9,	GPIO_FN_LCDD10,	GPIO_FN_LCDD11,
+	GPIO_FN_LCDD12,	GPIO_FN_LCDD13,	GPIO_FN_LCDD14,	GPIO_FN_LCDD15,
+	GPIO_FN_LCDD16,	GPIO_FN_LCDD17,	GPIO_FN_LCDD18,	GPIO_FN_LCDD19,
+	GPIO_FN_LCDD20,	GPIO_FN_LCDD21,	GPIO_FN_LCDD22,	GPIO_FN_LCDD23,
+
+	/* IRDA		(PORT 139, 140, 141, 142) */
+	GPIO_FN_IRDA_OUT,	GPIO_FN_IRDA_IN,	GPIO_FN_IRDA_FIRSEL,
+	GPIO_FN_IROUT_139,	GPIO_FN_IROUT_140,
+
+	/* TSIF1	(PORT 156, 157, 158, 159) */
+	GPIO_FN_TS0_1SELECT, /* TSIF0 - 1 select */
+	GPIO_FN_TS0_2SELECT, /* TSIF0 - 2 select */
+	GPIO_FN_TS1_1SELECT, /* TSIF1 - 1 select */
+	GPIO_FN_TS1_2SELECT, /* TSIF1 - 2 select */
+
+	GPIO_FN_TS_SPSYNC1,	GPIO_FN_TS_SDAT1,
+	GPIO_FN_TS_SDEN1,	GPIO_FN_TS_SCK1,
+
+	/* TSIF2	(PORT 137, 145, 146, 147) */
+	GPIO_FN_TS_SPSYNC2,	GPIO_FN_TS_SDAT2,
+	GPIO_FN_TS_SDEN2,	GPIO_FN_TS_SCK2,
+
+	/* HDMI		(PORT 169, 170) */
+	GPIO_FN_HDMI_HPD,	GPIO_FN_HDMI_CEC,
+
+	/* SDHI0	(PORT 171, 172, 173, 174, 175, 176, 177, 178) */
+	GPIO_FN_SDHICLK0,	GPIO_FN_SDHICD0,
+	GPIO_FN_SDHICMD0,	GPIO_FN_SDHIWP0,
+	GPIO_FN_SDHID0_0,	GPIO_FN_SDHID0_1,
+	GPIO_FN_SDHID0_2,	GPIO_FN_SDHID0_3,
+
+	/* SDHI1	(PORT 179, 180, 181, 182, 183, 184) */
+	GPIO_FN_SDHICLK1,	GPIO_FN_SDHICMD1,	GPIO_FN_SDHID1_0,
+	GPIO_FN_SDHID1_1,	GPIO_FN_SDHID1_2,	GPIO_FN_SDHID1_3,
+
+	/* SDHI2	(PORT 185, 186, 187, 188, 189, 190) */
+	GPIO_FN_SDHICLK2,	GPIO_FN_SDHICMD2,	GPIO_FN_SDHID2_0,
+	GPIO_FN_SDHID2_1,	GPIO_FN_SDHID2_2,	GPIO_FN_SDHID2_3,
+
+	/* SDENC	see MSEL4CR 19 */
+	GPIO_FN_SDENC_CPG,
+	GPIO_FN_SDENC_DV_CLKI,
+};
+
+#endif /* __ASM_SH7372_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/sh7377.h b/arch/arm/mach-shmobile/include/mach/sh7377.h
new file mode 100644
index 000000000000..f580e227dd1c
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/sh7377.h
@@ -0,0 +1,360 @@
+#ifndef __ASM_SH7377_H__
+#define __ASM_SH7377_H__
+
+/* Pin Function Controller:
+ * GPIO_FN_xx - GPIO used to select pin function
+ * GPIO_PORTxx - GPIO mapped to real I/O pin on CPU
+ */
+enum {
+	/* 55-1 -> 55-5 (GPIO) */
+	GPIO_PORT0, GPIO_PORT1, GPIO_PORT2, GPIO_PORT3, GPIO_PORT4,
+	GPIO_PORT5, GPIO_PORT6, GPIO_PORT7, GPIO_PORT8, GPIO_PORT9,
+
+	GPIO_PORT10, GPIO_PORT11, GPIO_PORT12, GPIO_PORT13, GPIO_PORT14,
+	GPIO_PORT15, GPIO_PORT16, GPIO_PORT17, GPIO_PORT18, GPIO_PORT19,
+
+	GPIO_PORT20, GPIO_PORT21, GPIO_PORT22, GPIO_PORT23, GPIO_PORT24,
+	GPIO_PORT25, GPIO_PORT26, GPIO_PORT27, GPIO_PORT28, GPIO_PORT29,
+
+	GPIO_PORT30, GPIO_PORT31, GPIO_PORT32, GPIO_PORT33, GPIO_PORT34,
+	GPIO_PORT35, GPIO_PORT36, GPIO_PORT37, GPIO_PORT38, GPIO_PORT39,
+
+	GPIO_PORT40, GPIO_PORT41, GPIO_PORT42, GPIO_PORT43, GPIO_PORT44,
+	GPIO_PORT45, GPIO_PORT46, GPIO_PORT47, GPIO_PORT48, GPIO_PORT49,
+
+	GPIO_PORT50, GPIO_PORT51, GPIO_PORT52, GPIO_PORT53, GPIO_PORT54,
+	GPIO_PORT55, GPIO_PORT56, GPIO_PORT57, GPIO_PORT58, GPIO_PORT59,
+
+	GPIO_PORT60, GPIO_PORT61, GPIO_PORT62, GPIO_PORT63, GPIO_PORT64,
+	GPIO_PORT65, GPIO_PORT66, GPIO_PORT67, GPIO_PORT68, GPIO_PORT69,
+
+	GPIO_PORT70, GPIO_PORT71, GPIO_PORT72, GPIO_PORT73, GPIO_PORT74,
+	GPIO_PORT75, GPIO_PORT76, GPIO_PORT77, GPIO_PORT78, GPIO_PORT79,
+
+	GPIO_PORT80, GPIO_PORT81, GPIO_PORT82, GPIO_PORT83, GPIO_PORT84,
+	GPIO_PORT85, GPIO_PORT86, GPIO_PORT87, GPIO_PORT88, GPIO_PORT89,
+
+	GPIO_PORT90, GPIO_PORT91, GPIO_PORT92, GPIO_PORT93, GPIO_PORT94,
+	GPIO_PORT95, GPIO_PORT96, GPIO_PORT97, GPIO_PORT98, GPIO_PORT99,
+
+	GPIO_PORT100, GPIO_PORT101, GPIO_PORT102, GPIO_PORT103, GPIO_PORT104,
+	GPIO_PORT105, GPIO_PORT106, GPIO_PORT107, GPIO_PORT108, GPIO_PORT109,
+
+	GPIO_PORT110, GPIO_PORT111, GPIO_PORT112, GPIO_PORT113, GPIO_PORT114,
+	GPIO_PORT115, GPIO_PORT116, GPIO_PORT117, GPIO_PORT118,
+
+	GPIO_PORT128, GPIO_PORT129,
+
+	GPIO_PORT130, GPIO_PORT131, GPIO_PORT132, GPIO_PORT133, GPIO_PORT134,
+	GPIO_PORT135, GPIO_PORT136, GPIO_PORT137, GPIO_PORT138, GPIO_PORT139,
+
+	GPIO_PORT140, GPIO_PORT141, GPIO_PORT142, GPIO_PORT143, GPIO_PORT144,
+	GPIO_PORT145, GPIO_PORT146, GPIO_PORT147, GPIO_PORT148, GPIO_PORT149,
+
+	GPIO_PORT150, GPIO_PORT151, GPIO_PORT152, GPIO_PORT153, GPIO_PORT154,
+	GPIO_PORT155, GPIO_PORT156, GPIO_PORT157, GPIO_PORT158, GPIO_PORT159,
+
+	GPIO_PORT160, GPIO_PORT161, GPIO_PORT162, GPIO_PORT163, GPIO_PORT164,
+
+	GPIO_PORT192, GPIO_PORT193, GPIO_PORT194,
+	GPIO_PORT195, GPIO_PORT196, GPIO_PORT197, GPIO_PORT198, GPIO_PORT199,
+
+	GPIO_PORT200, GPIO_PORT201, GPIO_PORT202, GPIO_PORT203, GPIO_PORT204,
+	GPIO_PORT205, GPIO_PORT206, GPIO_PORT207, GPIO_PORT208, GPIO_PORT209,
+
+	GPIO_PORT210, GPIO_PORT211, GPIO_PORT212, GPIO_PORT213, GPIO_PORT214,
+	GPIO_PORT215, GPIO_PORT216, GPIO_PORT217, GPIO_PORT218, GPIO_PORT219,
+
+	GPIO_PORT220, GPIO_PORT221, GPIO_PORT222, GPIO_PORT223, GPIO_PORT224,
+	GPIO_PORT225, GPIO_PORT226, GPIO_PORT227, GPIO_PORT228, GPIO_PORT229,
+
+	GPIO_PORT230, GPIO_PORT231, GPIO_PORT232, GPIO_PORT233, GPIO_PORT234,
+	GPIO_PORT235, GPIO_PORT236, GPIO_PORT237, GPIO_PORT238, GPIO_PORT239,
+
+	GPIO_PORT240, GPIO_PORT241, GPIO_PORT242, GPIO_PORT243, GPIO_PORT244,
+	GPIO_PORT245, GPIO_PORT246, GPIO_PORT247, GPIO_PORT248, GPIO_PORT249,
+
+	GPIO_PORT250, GPIO_PORT251, GPIO_PORT252, GPIO_PORT253, GPIO_PORT254,
+	GPIO_PORT255, GPIO_PORT256, GPIO_PORT257, GPIO_PORT258, GPIO_PORT259,
+
+	GPIO_PORT260, GPIO_PORT261, GPIO_PORT262, GPIO_PORT263, GPIO_PORT264,
+
+	/* Special Pull-up / Pull-down Functions */
+	GPIO_FN_PORT66_KEYIN0_PU, GPIO_FN_PORT67_KEYIN1_PU,
+	GPIO_FN_PORT68_KEYIN2_PU, GPIO_FN_PORT69_KEYIN3_PU,
+	GPIO_FN_PORT70_KEYIN4_PU, GPIO_FN_PORT71_KEYIN5_PU,
+	GPIO_FN_PORT72_KEYIN6_PU,
+
+	/* 55-1 (FN) */
+	GPIO_FN_VBUS_0,
+	GPIO_FN_CPORT0,
+	GPIO_FN_CPORT1,
+	GPIO_FN_CPORT2,
+	GPIO_FN_CPORT3,
+	GPIO_FN_CPORT4,
+	GPIO_FN_CPORT5,
+	GPIO_FN_CPORT6,
+	GPIO_FN_CPORT7,
+	GPIO_FN_CPORT8,
+	GPIO_FN_CPORT9,
+	GPIO_FN_CPORT10,
+	GPIO_FN_CPORT11, GPIO_FN_SIN2,
+	GPIO_FN_CPORT12, GPIO_FN_XCTS2,
+	GPIO_FN_CPORT13, GPIO_FN_RFSPO4,
+	GPIO_FN_CPORT14, GPIO_FN_RFSPO5,
+	GPIO_FN_CPORT15, GPIO_FN_SCIFA0_SCK, GPIO_FN_GPS_AGC2,
+	GPIO_FN_CPORT16, GPIO_FN_SCIFA0_TXD, GPIO_FN_GPS_AGC3,
+	GPIO_FN_CPORT17_IC_OE, GPIO_FN_SOUT2,
+	GPIO_FN_CPORT18, GPIO_FN_XRTS2, GPIO_FN_PORT19_VIO_CKO2,
+	GPIO_FN_CPORT19_MPORT1,
+	GPIO_FN_CPORT20, GPIO_FN_RFSPO6,
+	GPIO_FN_CPORT21, GPIO_FN_STATUS0,
+	GPIO_FN_CPORT22, GPIO_FN_STATUS1,
+	GPIO_FN_CPORT23, GPIO_FN_STATUS2, GPIO_FN_RFSPO7,
+	GPIO_FN_B_SYNLD1,
+	GPIO_FN_B_SYNLD2, GPIO_FN_SYSENMSK,
+	GPIO_FN_XMAINPS,
+	GPIO_FN_XDIVPS,
+	GPIO_FN_XIDRST,
+	GPIO_FN_IDCLK, GPIO_FN_IC_DP,
+	GPIO_FN_IDIO, GPIO_FN_IC_DM,
+	GPIO_FN_SOUT1, GPIO_FN_SCIFA4_TXD, GPIO_FN_M02_BERDAT,
+	GPIO_FN_SIN1, GPIO_FN_SCIFA4_RXD, GPIO_FN_XWUP,
+	GPIO_FN_XRTS1, GPIO_FN_SCIFA4_RTS, GPIO_FN_M03_BERCLK,
+	GPIO_FN_XCTS1, GPIO_FN_SCIFA4_CTS,
+	GPIO_FN_PCMCLKO,
+	GPIO_FN_SYNC8KO,
+
+	/* 55-2 (FN) */
+	GPIO_FN_DNPCM_A,
+	GPIO_FN_UPPCM_A,
+	GPIO_FN_VACK,
+	GPIO_FN_XTALB1L,
+	GPIO_FN_GPS_AGC1, GPIO_FN_SCIFA0_RTS,
+	GPIO_FN_GPS_AGC4, GPIO_FN_SCIFA0_RXD,
+	GPIO_FN_GPS_PWRDOWN, GPIO_FN_SCIFA0_CTS,
+	GPIO_FN_GPS_IM,
+	GPIO_FN_GPS_IS,
+	GPIO_FN_GPS_QM,
+	GPIO_FN_GPS_QS,
+	GPIO_FN_FMSOCK, GPIO_FN_PORT49_IRDA_OUT, GPIO_FN_PORT49_IROUT,
+	GPIO_FN_FMSOOLR, GPIO_FN_BBIF2_TSYNC2, GPIO_FN_TPU2TO2, GPIO_FN_IPORT3,
+	GPIO_FN_FMSIOLR,
+	GPIO_FN_FMSOOBT, GPIO_FN_BBIF2_TSCK2, GPIO_FN_TPU2TO3, GPIO_FN_OPORT1,
+	GPIO_FN_FMSIOBT,
+	GPIO_FN_FMSOSLD, GPIO_FN_BBIF2_TXD2, GPIO_FN_OPORT2,
+	GPIO_FN_FMSOILR, GPIO_FN_PORT53_IRDA_IN, GPIO_FN_TPU3TO3,
+	GPIO_FN_OPORT3, GPIO_FN_FMSIILR,
+	GPIO_FN_FMSOIBT, GPIO_FN_PORT54_IRDA_FIRSEL, GPIO_FN_TPU3TO2,
+	GPIO_FN_FMSIIBT,
+	GPIO_FN_FMSISLD, GPIO_FN_MFG0_OUT1, GPIO_FN_TPU0TO0,
+	GPIO_FN_A0_EA0, GPIO_FN_BS,
+	GPIO_FN_A12_EA12, GPIO_FN_PORT58_VIO_CKOR, GPIO_FN_TPU4TO2,
+	GPIO_FN_A13_EA13, GPIO_FN_PORT59_IROUT, GPIO_FN_MFG0_OUT2,
+	GPIO_FN_TPU0TO1,
+	GPIO_FN_A14_EA14, GPIO_FN_PORT60_KEYOUT5,
+	GPIO_FN_A15_EA15, GPIO_FN_PORT61_KEYOUT4,
+	GPIO_FN_A16_EA16, GPIO_FN_PORT62_KEYOUT3, GPIO_FN_MSIOF0_SS1,
+	GPIO_FN_A17_EA17, GPIO_FN_PORT63_KEYOUT2, GPIO_FN_MSIOF0_TSYNC,
+	GPIO_FN_A18_EA18, GPIO_FN_PORT64_KEYOUT1, GPIO_FN_MSIOF0_TSCK,
+	GPIO_FN_A19_EA19, GPIO_FN_PORT65_KEYOUT0, GPIO_FN_MSIOF0_TXD,
+	GPIO_FN_A20_EA20, GPIO_FN_PORT66_KEYIN0, GPIO_FN_MSIOF0_RSCK,
+	GPIO_FN_A21_EA21, GPIO_FN_PORT67_KEYIN1, GPIO_FN_MSIOF0_RSYNC,
+	GPIO_FN_A22_EA22, GPIO_FN_PORT68_KEYIN2, GPIO_FN_MSIOF0_MCK0,
+	GPIO_FN_A23_EA23, GPIO_FN_PORT69_KEYIN3, GPIO_FN_MSIOF0_MCK1,
+	GPIO_FN_A24_EA24, GPIO_FN_PORT70_KEYIN4, GPIO_FN_MSIOF0_RXD,
+	GPIO_FN_A25_EA25, GPIO_FN_PORT71_KEYIN5, GPIO_FN_MSIOF0_SS2,
+	GPIO_FN_A26, GPIO_FN_PORT72_KEYIN6,
+	GPIO_FN_D0_ED0_NAF0,
+	GPIO_FN_D1_ED1_NAF1,
+	GPIO_FN_D2_ED2_NAF2,
+	GPIO_FN_D3_ED3_NAF3,
+	GPIO_FN_D4_ED4_NAF4,
+	GPIO_FN_D5_ED5_NAF5,
+	GPIO_FN_D6_ED6_NAF6,
+	GPIO_FN_D7_ED7_NAF7,
+	GPIO_FN_D8_ED8_NAF8,
+	GPIO_FN_D9_ED9_NAF9,
+	GPIO_FN_D10_ED10_NAF10,
+	GPIO_FN_D11_ED11_NAF11,
+	GPIO_FN_D12_ED12_NAF12,
+	GPIO_FN_D13_ED13_NAF13,
+	GPIO_FN_D14_ED14_NAF14,
+	GPIO_FN_D15_ED15_NAF15,
+	GPIO_FN_CS4,
+	GPIO_FN_CS5A, GPIO_FN_FMSICK,
+	GPIO_FN_CS5B, GPIO_FN_FCE1,
+
+	/* 55-3 (FN) */
+	GPIO_FN_CS6B, GPIO_FN_XCS2, GPIO_FN_CS6A, GPIO_FN_DACK0,
+	GPIO_FN_FCE0,
+	GPIO_FN_WAIT, GPIO_FN_DREQ0,
+	GPIO_FN_RD_XRD,
+	GPIO_FN_WE0_XWR0_FWE,
+	GPIO_FN_WE1_XWR1,
+	GPIO_FN_FRB,
+	GPIO_FN_CKO,
+	GPIO_FN_NBRSTOUT,
+	GPIO_FN_NBRST,
+	GPIO_FN_GPS_EPPSIN,
+	GPIO_FN_LATCHPULSE,
+	GPIO_FN_LTESIGNAL,
+	GPIO_FN_LEGACYSTATE,
+	GPIO_FN_TCKON,
+	GPIO_FN_VIO_VD, GPIO_FN_PORT128_KEYOUT0, GPIO_FN_IPORT0,
+	GPIO_FN_VIO_HD, GPIO_FN_PORT129_KEYOUT1, GPIO_FN_IPORT1,
+	GPIO_FN_VIO_D0, GPIO_FN_PORT130_KEYOUT2, GPIO_FN_PORT130_MSIOF2_RXD,
+	GPIO_FN_VIO_D1, GPIO_FN_PORT131_KEYOUT3, GPIO_FN_PORT131_MSIOF2_SS1,
+	GPIO_FN_VIO_D2, GPIO_FN_PORT132_KEYOUT4, GPIO_FN_PORT132_MSIOF2_SS2,
+	GPIO_FN_VIO_D3, GPIO_FN_PORT133_KEYOUT5, GPIO_FN_PORT133_MSIOF2_TSYNC,
+	GPIO_FN_VIO_D4, GPIO_FN_PORT134_KEYIN0, GPIO_FN_PORT134_MSIOF2_TXD,
+	GPIO_FN_VIO_D5, GPIO_FN_PORT135_KEYIN1, GPIO_FN_PORT135_MSIOF2_TSCK,
+	GPIO_FN_VIO_D6, GPIO_FN_PORT136_KEYIN2,
+	GPIO_FN_VIO_D7, GPIO_FN_PORT137_KEYIN3,
+	GPIO_FN_VIO_D8, GPIO_FN_M9_SLCD_A01, GPIO_FN_PORT138_FSIAOMC,
+	GPIO_FN_VIO_D9, GPIO_FN_M10_SLCD_CK1, GPIO_FN_PORT139_FSIAOLR,
+	GPIO_FN_VIO_D10, GPIO_FN_M11_SLCD_SO1, GPIO_FN_TPU0TO2,
+	GPIO_FN_PORT140_FSIAOBT,
+	GPIO_FN_VIO_D11, GPIO_FN_M12_SLCD_CE1, GPIO_FN_TPU0TO3,
+	GPIO_FN_PORT141_FSIAOSLD,
+	GPIO_FN_VIO_D12, GPIO_FN_M13_BSW, GPIO_FN_PORT142_FSIACK,
+	GPIO_FN_VIO_D13, GPIO_FN_M14_GSW, GPIO_FN_PORT143_FSIAILR,
+	GPIO_FN_VIO_D14, GPIO_FN_M15_RSW, GPIO_FN_PORT144_FSIAIBT,
+	GPIO_FN_VIO_D15, GPIO_FN_TPU1TO3, GPIO_FN_PORT145_FSIAISLD,
+	GPIO_FN_VIO_CLK, GPIO_FN_PORT146_KEYIN4, GPIO_FN_IPORT2,
+	GPIO_FN_VIO_FIELD, GPIO_FN_PORT147_KEYIN5,
+	GPIO_FN_VIO_CKO, GPIO_FN_PORT148_KEYIN6,
+	GPIO_FN_A27, GPIO_FN_RDWR_XWE, GPIO_FN_MFG0_IN1,
+	GPIO_FN_MFG0_IN2,
+	GPIO_FN_TS_SPSYNC3, GPIO_FN_MSIOF2_RSCK,
+	GPIO_FN_TS_SDAT3, GPIO_FN_MSIOF2_RSYNC,
+	GPIO_FN_TPU1TO2, GPIO_FN_TS_SDEN3, GPIO_FN_PORT153_MSIOF2_SS1,
+	GPIO_FN_SOUT3, GPIO_FN_SCIFA2_TXD1, GPIO_FN_MSIOF2_MCK0,
+	GPIO_FN_SIN3, GPIO_FN_SCIFA2_RXD1, GPIO_FN_MSIOF2_MCK1,
+	GPIO_FN_XRTS3, GPIO_FN_SCIFA2_RTS1, GPIO_FN_PORT156_MSIOF2_SS2,
+	GPIO_FN_XCTS3, GPIO_FN_SCIFA2_CTS1, GPIO_FN_PORT157_MSIOF2_RXD,
+
+	/* 55-4 (FN) */
+	GPIO_FN_DINT, GPIO_FN_SCIFA2_SCK1, GPIO_FN_TS_SCK3,
+	GPIO_FN_PORT159_SCIFB_SCK, GPIO_FN_PORT159_SCIFA5_SCK, GPIO_FN_NMI,
+	GPIO_FN_PORT160_SCIFB_TXD, GPIO_FN_PORT160_SCIFA5_TXD, GPIO_FN_SOUT0,
+	GPIO_FN_PORT161_SCIFB_CTS, GPIO_FN_PORT161_SCIFA5_CTS, GPIO_FN_XCTS0,
+	GPIO_FN_MFG3_IN2,
+	GPIO_FN_PORT162_SCIFB_RXD, GPIO_FN_PORT162_SCIFA5_RXD, GPIO_FN_SIN0,
+	GPIO_FN_MFG3_IN1,
+	GPIO_FN_PORT163_SCIFB_RTS, GPIO_FN_PORT163_SCIFA5_RTS, GPIO_FN_XRTS0,
+	GPIO_FN_MFG3_OUT1,
+	GPIO_FN_TPU3TO0,
+	GPIO_FN_LCDD0, GPIO_FN_PORT192_KEYOUT0, GPIO_FN_EXT_CKI,
+	GPIO_FN_LCDD1, GPIO_FN_PORT193_KEYOUT1, GPIO_FN_PORT193_SCIFA5_CTS,
+	GPIO_FN_BBIF2_TSYNC1,
+	GPIO_FN_LCDD2, GPIO_FN_PORT194_KEYOUT2, GPIO_FN_PORT194_SCIFA5_RTS,
+	GPIO_FN_BBIF2_TSCK1,
+	GPIO_FN_LCDD3, GPIO_FN_PORT195_KEYOUT3, GPIO_FN_PORT195_SCIFA5_RXD,
+	GPIO_FN_BBIF2_TXD1,
+	GPIO_FN_LCDD4, GPIO_FN_PORT196_KEYOUT4, GPIO_FN_PORT196_SCIFA5_TXD,
+	GPIO_FN_LCDD5, GPIO_FN_PORT197_KEYOUT5, GPIO_FN_PORT197_SCIFA5_SCK,
+	GPIO_FN_MFG2_OUT2, GPIO_FN_TPU2TO1,
+	GPIO_FN_LCDD6, GPIO_FN_XWR2,
+	GPIO_FN_LCDD7, GPIO_FN_TPU4TO1, GPIO_FN_MFG4_OUT2, GPIO_FN_XWR3,
+	GPIO_FN_LCDD8, GPIO_FN_PORT200_KEYIN0, GPIO_FN_VIO_DR0, GPIO_FN_D16,
+	GPIO_FN_ED16,
+	GPIO_FN_LCDD9, GPIO_FN_PORT201_KEYIN1, GPIO_FN_VIO_DR1, GPIO_FN_D17,
+	GPIO_FN_ED17,
+	GPIO_FN_LCDD10, GPIO_FN_PORT202_KEYIN2, GPIO_FN_VIO_DR2, GPIO_FN_D18,
+	GPIO_FN_ED18,
+	GPIO_FN_LCDD11, GPIO_FN_PORT203_KEYIN3, GPIO_FN_VIO_DR3, GPIO_FN_D19,
+	GPIO_FN_ED19,
+	GPIO_FN_LCDD12, GPIO_FN_PORT204_KEYIN4, GPIO_FN_VIO_DR4, GPIO_FN_D20,
+	GPIO_FN_ED20,
+	GPIO_FN_LCDD13, GPIO_FN_PORT205_KEYIN5, GPIO_FN_VIO_DR5, GPIO_FN_D21,
+	GPIO_FN_ED21,
+	GPIO_FN_LCDD14, GPIO_FN_PORT206_KEYIN6, GPIO_FN_VIO_DR6, GPIO_FN_D22,
+	GPIO_FN_ED22,
+	GPIO_FN_LCDD15, GPIO_FN_PORT207_MSIOF0L_SS1, GPIO_FN_PORT207_KEYOUT0,
+	GPIO_FN_VIO_DR7,
+	GPIO_FN_D23, GPIO_FN_ED23,
+	GPIO_FN_LCDD16, GPIO_FN_PORT208_MSIOF0L_SS2, GPIO_FN_PORT208_KEYOUT1,
+	GPIO_FN_VIO_VDR,
+	GPIO_FN_D24, GPIO_FN_ED24,
+	GPIO_FN_LCDD17, GPIO_FN_PORT209_KEYOUT2, GPIO_FN_VIO_HDR, GPIO_FN_D25,
+	GPIO_FN_ED25,
+	GPIO_FN_LCDD18, GPIO_FN_DREQ2, GPIO_FN_PORT210_MSIOF0L_SS1, GPIO_FN_D26,
+	GPIO_FN_ED26,
+	GPIO_FN_LCDD19, GPIO_FN_PORT211_MSIOF0L_SS2, GPIO_FN_D27, GPIO_FN_ED27,
+	GPIO_FN_LCDD20, GPIO_FN_TS_SPSYNC1, GPIO_FN_MSIOF0L_MCK0, GPIO_FN_D28,
+	GPIO_FN_ED28,
+	GPIO_FN_LCDD21, GPIO_FN_TS_SDAT1, GPIO_FN_MSIOF0L_MCK1, GPIO_FN_D29,
+	GPIO_FN_ED29,
+	GPIO_FN_LCDD22, GPIO_FN_TS_SDEN1, GPIO_FN_MSIOF0L_RSCK, GPIO_FN_D30,
+	GPIO_FN_ED30,
+	GPIO_FN_LCDD23, GPIO_FN_TS_SCK1, GPIO_FN_MSIOF0L_RSYNC, GPIO_FN_D31,
+	GPIO_FN_ED31,
+	GPIO_FN_LCDDCK, GPIO_FN_LCDWR, GPIO_FN_PORT216_KEYOUT3,
+	GPIO_FN_VIO_CLKR,
+	GPIO_FN_LCDRD, GPIO_FN_DACK2, GPIO_FN_MSIOF0L_TSYNC,
+	GPIO_FN_LCDHSYN, GPIO_FN_LCDCS, GPIO_FN_LCDCS2, GPIO_FN_DACK3,
+	GPIO_FN_PORT218_VIO_CKOR, GPIO_FN_PORT218_KEYOUT4,
+	GPIO_FN_LCDDISP, GPIO_FN_LCDRS, GPIO_FN_DREQ3, GPIO_FN_MSIOF0L_TSCK,
+	GPIO_FN_LCDVSYN, GPIO_FN_LCDVSYN2, GPIO_FN_PORT220_KEYOUT5,
+	GPIO_FN_LCDLCLK, GPIO_FN_DREQ1, GPIO_FN_PWEN, GPIO_FN_MSIOF0L_RXD,
+	GPIO_FN_LCDDON, GPIO_FN_LCDDON2, GPIO_FN_DACK1, GPIO_FN_OVCN,
+	GPIO_FN_MSIOF0L_TXD,
+	GPIO_FN_SCIFA1_TXD, GPIO_FN_OVCN2,
+	GPIO_FN_EXTLP, GPIO_FN_SCIFA1_SCK, GPIO_FN_USBTERM,
+	GPIO_FN_PORT226_VIO_CKO2,
+	GPIO_FN_SCIFA1_RTS, GPIO_FN_IDIN,
+	GPIO_FN_SCIFA1_RXD,
+	GPIO_FN_SCIFA1_CTS, GPIO_FN_MFG1_IN1,
+	GPIO_FN_MSIOF1_TXD, GPIO_FN_SCIFA2_TXD2, GPIO_FN_PORT230_FSIAOMC,
+	GPIO_FN_MSIOF1_TSYNC, GPIO_FN_SCIFA2_CTS2, GPIO_FN_PORT231_FSIAOLR,
+	GPIO_FN_MSIOF1_TSCK, GPIO_FN_SCIFA2_SCK2, GPIO_FN_PORT232_FSIAOBT,
+	GPIO_FN_MSIOF1_RXD, GPIO_FN_SCIFA2_RXD2, GPIO_FN_GPS_VCOTRIG,
+	GPIO_FN_PORT233_FSIACK,
+	GPIO_FN_MSIOF1_RSCK, GPIO_FN_SCIFA2_RTS2, GPIO_FN_PORT234_FSIAOSLD,
+	GPIO_FN_MSIOF1_RSYNC, GPIO_FN_OPORT0, GPIO_FN_MFG1_IN2,
+	GPIO_FN_PORT235_FSIAILR,
+	GPIO_FN_MSIOF1_MCK0, GPIO_FN_I2C_SDA2, GPIO_FN_PORT236_FSIAIBT,
+	GPIO_FN_MSIOF1_MCK1, GPIO_FN_I2C_SCL2, GPIO_FN_PORT237_FSIAISLD,
+	GPIO_FN_MSIOF1_SS1, GPIO_FN_EDBGREQ3,
+
+	/* 55-5 (FN) */
+	GPIO_FN_MSIOF1_SS2,
+	GPIO_FN_SCIFA6_TXD,
+	GPIO_FN_PORT241_IRDA_OUT, GPIO_FN_PORT241_IROUT, GPIO_FN_MFG4_OUT1,
+	GPIO_FN_TPU4TO0,
+	GPIO_FN_PORT242_IRDA_IN, GPIO_FN_MFG4_IN2,
+	GPIO_FN_PORT243_IRDA_FIRSEL, GPIO_FN_PORT243_VIO_CKO2,
+	GPIO_FN_PORT244_SCIFA5_CTS, GPIO_FN_MFG2_IN1, GPIO_FN_PORT244_SCIFB_CTS,
+	GPIO_FN_PORT244_MSIOF2_RXD,
+	GPIO_FN_PORT245_SCIFA5_RTS, GPIO_FN_MFG2_IN2, GPIO_FN_PORT245_SCIFB_RTS,
+	GPIO_FN_PORT245_MSIOF2_TXD,
+	GPIO_FN_PORT246_SCIFA5_RXD, GPIO_FN_MFG1_OUT1,
+	GPIO_FN_PORT246_SCIFB_RXD, GPIO_FN_TPU1TO0,
+	GPIO_FN_PORT247_SCIFA5_TXD, GPIO_FN_MFG3_OUT2,
+	GPIO_FN_PORT247_SCIFB_TXD, GPIO_FN_TPU3TO1,
+	GPIO_FN_PORT248_SCIFA5_SCK, GPIO_FN_MFG2_OUT1,
+	GPIO_FN_PORT248_SCIFB_SCK, GPIO_FN_TPU2TO0,
+	GPIO_FN_PORT248_MSIOF2_TSCK,
+	GPIO_FN_PORT249_IROUT, GPIO_FN_MFG4_IN1, GPIO_FN_PORT249_MSIOF2_TSYNC,
+	GPIO_FN_SDHICLK0, GPIO_FN_TCK2_SWCLK_MC0,
+	GPIO_FN_SDHICD0,
+	GPIO_FN_SDHID0_0, GPIO_FN_TMS2_SWDIO_MC0,
+	GPIO_FN_SDHID0_1, GPIO_FN_TDO2_SWO0_MC0,
+	GPIO_FN_SDHID0_2, GPIO_FN_TDI2,
+	GPIO_FN_SDHID0_3, GPIO_FN_RTCK2_SWO1_MC0,
+	GPIO_FN_SDHICMD0, GPIO_FN_TRST2,
+	GPIO_FN_SDHIWP0, GPIO_FN_EDBGREQ2,
+	GPIO_FN_SDHICLK1, GPIO_FN_TCK3_SWCLK_MC1,
+	GPIO_FN_SDHID1_0, GPIO_FN_M11_SLCD_SO2, GPIO_FN_TS_SPSYNC2,
+	GPIO_FN_TMS3_SWDIO_MC1,
+	GPIO_FN_SDHID1_1, GPIO_FN_M9_SLCD_A02, GPIO_FN_TS_SDAT2,
+	GPIO_FN_TDO3_SWO0_MC1,
+	GPIO_FN_SDHID1_2, GPIO_FN_M10_SLCD_CK2, GPIO_FN_TS_SDEN2, GPIO_FN_TDI3,
+	GPIO_FN_SDHID1_3, GPIO_FN_M12_SLCD_CE2, GPIO_FN_TS_SCK2,
+	GPIO_FN_RTCK3_SWO1_MC1,
+	GPIO_FN_SDHICMD1, GPIO_FN_TRST3,
+	GPIO_FN_RESETOUTS,
+};
+
+#endif /* __ASM_SH7377_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/system.h b/arch/arm/mach-shmobile/include/mach/system.h
new file mode 100644
index 000000000000..76a687eeaa22
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/system.h
@@ -0,0 +1,14 @@
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+	cpu_reset(0);
+}
+
+#endif
diff --git a/arch/arm/mach-shmobile/include/mach/timex.h b/arch/arm/mach-shmobile/include/mach/timex.h
new file mode 100644
index 000000000000..ae0d8d825c23
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/timex.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_MACH_TIMEX_H
+#define __ASM_MACH_TIMEX_H
+
+#define CLOCK_TICK_RATE		1193180 /* unused i8253 PIT value */
+
+#endif /* __ASM_MACH_TIMEX_H */
diff --git a/arch/arm/mach-shmobile/include/mach/uncompress.h b/arch/arm/mach-shmobile/include/mach/uncompress.h
new file mode 100644
index 000000000000..0bd7556b1387
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/uncompress.h
@@ -0,0 +1,21 @@
+#ifndef __ASM_MACH_UNCOMPRESS_H
+#define __ASM_MACH_UNCOMPRESS_H
+
+/*
+ * This does not append a newline
+ */
+static void putc(int c)
+{
+}
+
+static inline void flush(void)
+{
+}
+
+static void arch_decomp_setup(void)
+{
+}
+
+#define arch_decomp_wdog()
+
+#endif /* __ASM_MACH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-shmobile/include/mach/vmalloc.h b/arch/arm/mach-shmobile/include/mach/vmalloc.h
new file mode 100644
index 000000000000..fb3c4f1ab252
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/vmalloc.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_MACH_VMALLOC_H
+#define __ASM_MACH_VMALLOC_H
+
+#define VMALLOC_END       (PAGE_OFFSET + 0x24000000)
+
+#endif /* __ASM_MACH_VMALLOC_H */
diff --git a/arch/arm/mach-shmobile/intc-sh7367.c b/arch/arm/mach-shmobile/intc-sh7367.c
new file mode 100644
index 000000000000..5ff70cadfc32
--- /dev/null
+++ b/arch/arm/mach-shmobile/intc-sh7367.c
@@ -0,0 +1,270 @@
+/*
+ * sh7367 processor support - INTC hardware block
+ *
+ * Copyright (C) 2010  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/sh_intc.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+enum {
+	UNUSED_INTCA = 0,
+	ENABLED,
+	DISABLED,
+
+	/* interrupt sources INTCA */
+	IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A,
+	IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A,
+	DIRC,
+	CRYPT1_ERR, CRYPT2_STD,
+	IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1,
+	ARM11_IRQPMU, ARM11_COMMTX, ARM11_COMMRX,
+	ETM11_ACQCMP, ETM11_FULL,
+	MFI_MFIM, MFI_MFIS,
+	BBIF1, BBIF2,
+	USBDMAC_USHDMI,
+	USBHS_USHI0, USBHS_USHI1,
+	CMT1_CMT10, CMT1_CMT11, CMT1_CMT12, CMT1_CMT13, CMT2, CMT3,
+	KEYSC_KEY,
+	SCIFA0, SCIFA1, SCIFA2, SCIFA3,
+	MSIOF2, MSIOF1,
+	SCIFA4, SCIFA5, SCIFB,
+	FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
+	SDHI0,
+	SDHI1,
+	MSU_MSU, MSU_MSU2,
+	IREM,
+	SIU,
+	SPU,
+	IRDA,
+	TPU0, TPU1, TPU2, TPU3, TPU4,
+	LCRC,
+	PINT1, PINT2,
+	TTI20,
+	MISTY,
+	DDM,
+	SDHI2,
+	RWDT0, RWDT1,
+	DMAC_1_DEI0, DMAC_1_DEI1, DMAC_1_DEI2, DMAC_1_DEI3,
+	DMAC_2_DEI4, DMAC_2_DEI5, DMAC_2_DADERR,
+	DMAC2_1_DEI0, DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3,
+	DMAC2_2_DEI4, DMAC2_2_DEI5, DMAC2_2_DADERR,
+	DMAC3_1_DEI0, DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3,
+	DMAC3_2_DEI4, DMAC3_2_DEI5, DMAC3_2_DADERR,
+
+	/* interrupt groups INTCA */
+	DMAC_1, DMAC_2,	DMAC2_1, DMAC2_2, DMAC3_1, DMAC3_2,
+	ETM11, ARM11, USBHS, FLCTL, IIC1
+};
+
+static struct intc_vect intca_vectors[] = {
+	INTC_VECT(IRQ0A, 0x0200), INTC_VECT(IRQ1A, 0x0220),
+	INTC_VECT(IRQ2A, 0x0240), INTC_VECT(IRQ3A, 0x0260),
+	INTC_VECT(IRQ4A, 0x0280), INTC_VECT(IRQ5A, 0x02a0),
+	INTC_VECT(IRQ6A, 0x02c0), INTC_VECT(IRQ7A, 0x02e0),
+	INTC_VECT(IRQ8A, 0x0300), INTC_VECT(IRQ9A, 0x0320),
+	INTC_VECT(IRQ10A, 0x0340), INTC_VECT(IRQ11A, 0x0360),
+	INTC_VECT(IRQ12A, 0x0380), INTC_VECT(IRQ13A, 0x03a0),
+	INTC_VECT(IRQ14A, 0x03c0), INTC_VECT(IRQ15A, 0x03e0),
+	INTC_VECT(DIRC, 0x0560),
+	INTC_VECT(CRYPT1_ERR, 0x05e0),
+	INTC_VECT(CRYPT2_STD, 0x0700),
+	INTC_VECT(IIC1_ALI1, 0x0780), INTC_VECT(IIC1_TACKI1, 0x07a0),
+	INTC_VECT(IIC1_WAITI1, 0x07c0), INTC_VECT(IIC1_DTEI1, 0x07e0),
+	INTC_VECT(ARM11_IRQPMU, 0x0800), INTC_VECT(ARM11_COMMTX, 0x0840),
+	INTC_VECT(ARM11_COMMRX, 0x0860),
+	INTC_VECT(ETM11_ACQCMP, 0x0880), INTC_VECT(ETM11_FULL, 0x08a0),
+	INTC_VECT(MFI_MFIM, 0x0900), INTC_VECT(MFI_MFIS, 0x0920),
+	INTC_VECT(BBIF1, 0x0940), INTC_VECT(BBIF2, 0x0960),
+	INTC_VECT(USBDMAC_USHDMI, 0x0a00),
+	INTC_VECT(USBHS_USHI0, 0x0a20), INTC_VECT(USBHS_USHI1, 0x0a40),
+	INTC_VECT(CMT1_CMT10, 0x0b00), INTC_VECT(CMT1_CMT11, 0x0b20),
+	INTC_VECT(CMT1_CMT12, 0x0b40), INTC_VECT(CMT1_CMT13, 0x0b60),
+	INTC_VECT(CMT2, 0x0b80), INTC_VECT(CMT3, 0x0ba0),
+	INTC_VECT(KEYSC_KEY, 0x0be0),
+	INTC_VECT(SCIFA0, 0x0c00), INTC_VECT(SCIFA1, 0x0c20),
+	INTC_VECT(SCIFA2, 0x0c40), INTC_VECT(SCIFA3, 0x0c60),
+	INTC_VECT(MSIOF2, 0x0c80), INTC_VECT(MSIOF1, 0x0d00),
+	INTC_VECT(SCIFA4, 0x0d20), INTC_VECT(SCIFA5, 0x0d40),
+	INTC_VECT(SCIFB, 0x0d60),
+	INTC_VECT(FLCTL_FLSTEI, 0x0d80), INTC_VECT(FLCTL_FLTENDI, 0x0da0),
+	INTC_VECT(FLCTL_FLTREQ0I, 0x0dc0), INTC_VECT(FLCTL_FLTREQ1I, 0x0de0),
+	INTC_VECT(SDHI0, 0x0e00), INTC_VECT(SDHI0, 0x0e20),
+	INTC_VECT(SDHI0, 0x0e40), INTC_VECT(SDHI0, 0x0e60),
+	INTC_VECT(SDHI1, 0x0e80), INTC_VECT(SDHI1, 0x0ea0),
+	INTC_VECT(SDHI1, 0x0ec0), INTC_VECT(SDHI1, 0x0ee0),
+	INTC_VECT(MSU_MSU, 0x0f20), INTC_VECT(MSU_MSU2, 0x0f40),
+	INTC_VECT(IREM, 0x0f60),
+	INTC_VECT(SIU, 0x0fa0),
+	INTC_VECT(SPU, 0x0fc0),
+	INTC_VECT(IRDA, 0x0480),
+	INTC_VECT(TPU0, 0x04a0), INTC_VECT(TPU1, 0x04c0),
+	INTC_VECT(TPU2, 0x04e0), INTC_VECT(TPU3, 0x0500),
+	INTC_VECT(TPU4, 0x0520),
+	INTC_VECT(LCRC, 0x0540),
+	INTC_VECT(PINT1, 0x1000), INTC_VECT(PINT2, 0x1020),
+	INTC_VECT(TTI20, 0x1100),
+	INTC_VECT(MISTY, 0x1120),
+	INTC_VECT(DDM, 0x1140),
+	INTC_VECT(SDHI2, 0x1200), INTC_VECT(SDHI2, 0x1220),
+	INTC_VECT(SDHI2, 0x1240), INTC_VECT(SDHI2, 0x1260),
+	INTC_VECT(RWDT0, 0x1280), INTC_VECT(RWDT1, 0x12a0),
+	INTC_VECT(DMAC_1_DEI0, 0x2000), INTC_VECT(DMAC_1_DEI1, 0x2020),
+	INTC_VECT(DMAC_1_DEI2, 0x2040), INTC_VECT(DMAC_1_DEI3, 0x2060),
+	INTC_VECT(DMAC_2_DEI4, 0x2080), INTC_VECT(DMAC_2_DEI5, 0x20a0),
+	INTC_VECT(DMAC_2_DADERR, 0x20c0),
+	INTC_VECT(DMAC2_1_DEI0, 0x2100), INTC_VECT(DMAC2_1_DEI1, 0x2120),
+	INTC_VECT(DMAC2_1_DEI2, 0x2140), INTC_VECT(DMAC2_1_DEI3, 0x2160),
+	INTC_VECT(DMAC2_2_DEI4, 0x2180), INTC_VECT(DMAC2_2_DEI5, 0x21a0),
+	INTC_VECT(DMAC2_2_DADERR, 0x21c0),
+	INTC_VECT(DMAC3_1_DEI0, 0x2200), INTC_VECT(DMAC3_1_DEI1, 0x2220),
+	INTC_VECT(DMAC3_1_DEI2, 0x2240), INTC_VECT(DMAC3_1_DEI3, 0x2260),
+	INTC_VECT(DMAC3_2_DEI4, 0x2280), INTC_VECT(DMAC3_2_DEI5, 0x22a0),
+	INTC_VECT(DMAC3_2_DADERR, 0x22c0),
+};
+
+static struct intc_group intca_groups[] __initdata = {
+	INTC_GROUP(DMAC_1, DMAC_1_DEI0,
+		   DMAC_1_DEI1, DMAC_1_DEI2, DMAC_1_DEI3),
+	INTC_GROUP(DMAC_2, DMAC_2_DEI4,
+		   DMAC_2_DEI5, DMAC_2_DADERR),
+	INTC_GROUP(DMAC2_1, DMAC2_1_DEI0,
+		   DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3),
+	INTC_GROUP(DMAC2_2, DMAC2_2_DEI4,
+		   DMAC2_2_DEI5, DMAC2_2_DADERR),
+	INTC_GROUP(DMAC3_1, DMAC3_1_DEI0,
+		   DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3),
+	INTC_GROUP(DMAC3_2, DMAC3_2_DEI4,
+		   DMAC3_2_DEI5, DMAC3_2_DADERR),
+	INTC_GROUP(ETM11, ETM11_ACQCMP, ETM11_FULL),
+	INTC_GROUP(ARM11, ARM11_IRQPMU, ARM11_COMMTX, ARM11_COMMTX),
+	INTC_GROUP(USBHS, USBHS_USHI0, USBHS_USHI1),
+	INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLTENDI,
+		   FLCTL_FLTREQ0I, FLCTL_FLTREQ1I),
+	INTC_GROUP(IIC1, IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1),
+};
+
+static struct intc_mask_reg intca_mask_registers[] = {
+	{ 0xe6900040, 0xe6900060, 8, /* INTMSK00A / INTMSKCLR00A */
+	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+	{ 0xe6900044, 0xe6900064, 8, /* INTMSK10A / INTMSKCLR10A */
+	  { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+	{ 0xe6940080, 0xe69400c0, 8, /* IMR0A / IMCR0A */
+	  { DMAC2_1_DEI3, DMAC2_1_DEI2, DMAC2_1_DEI1, DMAC2_1_DEI0,
+	    ARM11_IRQPMU, 0, ARM11_COMMTX, ARM11_COMMRX } },
+	{ 0xe6940084, 0xe69400c4, 8, /* IMR1A / IMCR1A */
+	  { CRYPT1_ERR, CRYPT2_STD, DIRC, 0,
+	    DMAC_1_DEI3, DMAC_1_DEI2, DMAC_1_DEI1, DMAC_1_DEI0 } },
+	{ 0xe6940088, 0xe69400c8, 8, /* IMR2A / IMCR2A */
+	  { PINT1, PINT2, 0, 0,
+	    BBIF1, BBIF2, MFI_MFIS, MFI_MFIM } },
+	{ 0xe694008c, 0xe69400cc, 8, /* IMR3A / IMCR3A */
+	  { DMAC3_1_DEI3, DMAC3_1_DEI2, DMAC3_1_DEI1, DMAC3_1_DEI0,
+	    DMAC3_2_DADERR, DMAC3_2_DEI5, DMAC3_2_DEI4, IRDA } },
+	{ 0xe6940090, 0xe69400d0, 8, /* IMR4A / IMCR4A */
+	  { DDM, 0, 0, 0,
+	    0, 0, ETM11_FULL, ETM11_ACQCMP } },
+	{ 0xe6940094, 0xe69400d4, 8, /* IMR5A / IMCR5A */
+	  { KEYSC_KEY, DMAC_2_DADERR, DMAC_2_DEI5, DMAC_2_DEI4,
+	    SCIFA3, SCIFA2, SCIFA1, SCIFA0 } },
+	{ 0xe6940098, 0xe69400d8, 8, /* IMR6A / IMCR6A */
+	  { SCIFB, SCIFA5, SCIFA4, MSIOF1,
+	    0, 0, MSIOF2, 0 } },
+	{ 0xe694009c, 0xe69400dc, 8, /* IMR7A / IMCR7A */
+	  { DISABLED, DISABLED, ENABLED, ENABLED,
+	    FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLTENDI, FLCTL_FLSTEI } },
+	{ 0xe69400a0, 0xe69400e0, 8, /* IMR8A / IMCR8A */
+	  { DISABLED, DISABLED, ENABLED, ENABLED,
+	    TTI20, USBDMAC_USHDMI, SPU, SIU } },
+	{ 0xe69400a4, 0xe69400e4, 8, /* IMR9A / IMCR9A */
+	  { CMT1_CMT13, CMT1_CMT12, CMT1_CMT11, CMT1_CMT10,
+	    CMT2, USBHS_USHI1, USBHS_USHI0, 0 } },
+	{ 0xe69400a8, 0xe69400e8, 8, /* IMR10A / IMCR10A */
+	  { 0, DMAC2_2_DADERR, DMAC2_2_DEI5, DMAC2_2_DEI4,
+	    0, 0, 0, 0 } },
+	{ 0xe69400ac, 0xe69400ec, 8, /* IMR11A / IMCR11A */
+	  { IIC1_DTEI1, IIC1_WAITI1, IIC1_TACKI1, IIC1_ALI1,
+	    LCRC, MSU_MSU2, IREM, MSU_MSU } },
+	{ 0xe69400b0, 0xe69400f0, 8, /* IMR12A / IMCR12A */
+	  { 0, 0, TPU0, TPU1,
+	    TPU2, TPU3, TPU4, 0 } },
+	{ 0xe69400b4, 0xe69400f4, 8, /* IMR13A / IMCR13A */
+	  { DISABLED, DISABLED, ENABLED, ENABLED,
+	    MISTY, CMT3, RWDT1, RWDT0 } },
+};
+
+static struct intc_prio_reg intca_prio_registers[] = {
+	{ 0xe6900010, 0, 32, 4, /* INTPRI00A */
+	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+	{ 0xe6900014, 0, 32, 4, /* INTPRI10A */
+	  { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+
+	{ 0xe6940000, 0, 16, 4, /* IPRAA */ { DMAC3_1, DMAC3_2, CMT2, LCRC } },
+	{ 0xe6940004, 0, 16, 4, /* IPRBA */ { IRDA, ETM11, BBIF1, BBIF2 } },
+	{ 0xe6940008, 0, 16, 4, /* IPRCA */ { CRYPT1_ERR, CRYPT2_STD,
+					      CMT1_CMT11, ARM11 } },
+	{ 0xe694000c, 0, 16, 4, /* IPRDA */ { PINT1, PINT2,
+					      CMT1_CMT12, TPU4 } },
+	{ 0xe6940010, 0, 16, 4, /* IPREA */ { DMAC_1, MFI_MFIS,
+					      MFI_MFIM, USBHS } },
+	{ 0xe6940014, 0, 16, 4, /* IPRFA */ { KEYSC_KEY, DMAC_2,
+					      0, CMT1_CMT10 } },
+	{ 0xe6940018, 0, 16, 4, /* IPRGA */ { SCIFA0, SCIFA1,
+					      SCIFA2, SCIFA3 } },
+	{ 0xe694001c, 0, 16, 4, /* IPRGH */ { MSIOF2, USBDMAC_USHDMI,
+					      FLCTL, SDHI0 } },
+	{ 0xe6940020, 0, 16, 4, /* IPRIA */ { MSIOF1, SCIFA4, MSU_MSU, IIC1 } },
+	{ 0xe6940024, 0, 16, 4, /* IPRJA */ { DMAC2_1, DMAC2_2, SIU, TTI20 } },
+	{ 0xe6940028, 0, 16, 4, /* IPRKA */ { 0, CMT1_CMT13, IREM, SDHI1 } },
+	{ 0xe694002c, 0, 16, 4, /* IPRLA */ { TPU0, TPU1, TPU2, TPU3 } },
+	{ 0xe6940030, 0, 16, 4, /* IPRMA */ { MISTY, CMT3, RWDT1, RWDT0 } },
+	{ 0xe6940034, 0, 16, 4, /* IPRNA */ { SCIFB, SCIFA5, SPU, DDM } },
+	{ 0xe6940038, 0, 16, 4, /* IPROA */ { 0, 0, DIRC, SDHI2 } },
+};
+
+static struct intc_sense_reg intca_sense_registers[] __initdata = {
+	{ 0xe6900000, 16, 2, /* ICR1A */
+	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+	{ 0xe6900004, 16, 2, /* ICR2A */
+	  { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+};
+
+static struct intc_mask_reg intca_ack_registers[] __initdata = {
+	{ 0xe6900020, 0, 8, /* INTREQ00A */
+	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+	{ 0xe6900024, 0, 8, /* INTREQ10A */
+	  { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+};
+
+static struct intc_desc intca_desc __initdata = {
+	.name = "sh7367-intca",
+	.force_enable = ENABLED,
+	.force_disable = DISABLED,
+	.hw = INTC_HW_DESC(intca_vectors, intca_groups,
+			   intca_mask_registers, intca_prio_registers,
+			   intca_sense_registers, intca_ack_registers),
+};
+
+void __init sh7367_init_irq(void)
+{
+	/* INTCA */
+	register_intc_controller(&intca_desc);
+}
diff --git a/arch/arm/mach-shmobile/intc-sh7372.c b/arch/arm/mach-shmobile/intc-sh7372.c
new file mode 100644
index 000000000000..3ce9d9bd5899
--- /dev/null
+++ b/arch/arm/mach-shmobile/intc-sh7372.c
@@ -0,0 +1,369 @@
+/*
+ * sh7372 processor support - INTC hardware block
+ *
+ * Copyright (C) 2010  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/sh_intc.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+enum {
+	UNUSED_INTCA = 0,
+	ENABLED,
+	DISABLED,
+
+	/* interrupt sources INTCA */
+	IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A,
+	IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A,
+	IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A,
+	IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A,
+	DIRC,
+	CRYPT_STD,
+	IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1,
+	AP_ARM_IRQPMU, AP_ARM_COMMTX, AP_ARM_COMMRX,
+	MFI_MFIM, MFI_MFIS,
+	BBIF1, BBIF2,
+	USBHSDMAC0_USHDMI,
+	_3DG_SGX540,
+	CMT1_CMT10, CMT1_CMT11, CMT1_CMT12, CMT1_CMT13, CMT2, CMT3,
+	KEYSC_KEY,
+	SCIFA0, SCIFA1, SCIFA2, SCIFA3,
+	MSIOF2, MSIOF1,
+	SCIFA4, SCIFA5, SCIFB,
+	FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
+	SDHI0,
+	SDHI1,
+	IRREM,
+	IRDA,
+	TPU0,
+	TTI20,
+	DDM,
+	SDHI2,
+	RWDT0,
+	DMAC1_1_DEI0, DMAC1_1_DEI1, DMAC1_1_DEI2, DMAC1_1_DEI3,
+	DMAC1_2_DEI4, DMAC1_2_DEI5, DMAC1_2_DADERR,
+	DMAC2_1_DEI0, DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3,
+	DMAC2_2_DEI4, DMAC2_2_DEI5, DMAC2_2_DADERR,
+	DMAC3_1_DEI0, DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3,
+	DMAC3_2_DEI4, DMAC3_2_DEI5, DMAC3_2_DADERR,
+	SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM,
+	HDMI,
+	SPU2_SPU0, SPU2_SPU1,
+	FSI, FMSI,
+	MIPI_HSI,
+	IPMMU_IPMMUD,
+	CEC_1, CEC_2,
+	AP_ARM_CTIIRQ, AP_ARM_DMAEXTERRIRQ, AP_ARM_DMAIRQ, AP_ARM_DMASIRQ,
+	MFIS2,
+	CPORTR2S,
+	CMT14, CMT15,
+	MMC_MMC_ERR, MMC_MMC_NOR,
+	IIC4_ALI4, IIC4_TACKI4, IIC4_WAITI4, IIC4_DTEI4,
+	IIC3_ALI3, IIC3_TACKI3, IIC3_WAITI3, IIC3_DTEI3,
+	USB0_USB0I1, USB0_USB0I0,
+	USB1_USB1I1, USB1_USB1I0,
+	USBHSDMAC1_USHDMI,
+
+	/* interrupt groups INTCA */
+	DMAC1_1, DMAC1_2, DMAC2_1, DMAC2_2, DMAC3_1, DMAC3_2, SHWYSTAT,
+	AP_ARM1, AP_ARM2, SPU2, FLCTL, IIC1
+};
+
+static struct intc_vect intca_vectors[] __initdata = {
+	INTC_VECT(IRQ0A, 0x0200), INTC_VECT(IRQ1A, 0x0220),
+	INTC_VECT(IRQ2A, 0x0240), INTC_VECT(IRQ3A, 0x0260),
+	INTC_VECT(IRQ4A, 0x0280), INTC_VECT(IRQ5A, 0x02a0),
+	INTC_VECT(IRQ6A, 0x02c0), INTC_VECT(IRQ7A, 0x02e0),
+	INTC_VECT(IRQ8A, 0x0300), INTC_VECT(IRQ9A, 0x0320),
+	INTC_VECT(IRQ10A, 0x0340), INTC_VECT(IRQ11A, 0x0360),
+	INTC_VECT(IRQ12A, 0x0380), INTC_VECT(IRQ13A, 0x03a0),
+	INTC_VECT(IRQ14A, 0x03c0), INTC_VECT(IRQ15A, 0x03e0),
+	INTC_VECT(IRQ16A, 0x3200), INTC_VECT(IRQ17A, 0x3220),
+	INTC_VECT(IRQ18A, 0x3240), INTC_VECT(IRQ19A, 0x3260),
+	INTC_VECT(IRQ20A, 0x3280), INTC_VECT(IRQ31A, 0x32a0),
+	INTC_VECT(IRQ22A, 0x32c0), INTC_VECT(IRQ23A, 0x32e0),
+	INTC_VECT(IRQ24A, 0x3300), INTC_VECT(IRQ25A, 0x3320),
+	INTC_VECT(IRQ26A, 0x3340), INTC_VECT(IRQ27A, 0x3360),
+	INTC_VECT(IRQ28A, 0x3380), INTC_VECT(IRQ29A, 0x33a0),
+	INTC_VECT(IRQ30A, 0x33c0), INTC_VECT(IRQ31A, 0x33e0),
+	INTC_VECT(DIRC, 0x0560),
+	INTC_VECT(CRYPT_STD, 0x0700),
+	INTC_VECT(IIC1_ALI1, 0x0780), INTC_VECT(IIC1_TACKI1, 0x07a0),
+	INTC_VECT(IIC1_WAITI1, 0x07c0), INTC_VECT(IIC1_DTEI1, 0x07e0),
+	INTC_VECT(AP_ARM_IRQPMU, 0x0800), INTC_VECT(AP_ARM_COMMTX, 0x0840),
+	INTC_VECT(AP_ARM_COMMRX, 0x0860),
+	INTC_VECT(MFI_MFIM, 0x0900), INTC_VECT(MFI_MFIS, 0x0920),
+	INTC_VECT(BBIF1, 0x0940), INTC_VECT(BBIF2, 0x0960),
+	INTC_VECT(USBHSDMAC0_USHDMI, 0x0a00),
+	INTC_VECT(_3DG_SGX540, 0x0a60),
+	INTC_VECT(CMT1_CMT10, 0x0b00), INTC_VECT(CMT1_CMT11, 0x0b20),
+	INTC_VECT(CMT1_CMT12, 0x0b40), INTC_VECT(CMT1_CMT13, 0x0b60),
+	INTC_VECT(CMT2, 0x0b80), INTC_VECT(CMT3, 0x0ba0),
+	INTC_VECT(KEYSC_KEY, 0x0be0),
+	INTC_VECT(SCIFA0, 0x0c00), INTC_VECT(SCIFA1, 0x0c20),
+	INTC_VECT(SCIFA2, 0x0c40), INTC_VECT(SCIFA3, 0x0c60),
+	INTC_VECT(MSIOF2, 0x0c80), INTC_VECT(MSIOF1, 0x0d00),
+	INTC_VECT(SCIFA4, 0x0d20), INTC_VECT(SCIFA5, 0x0d40),
+	INTC_VECT(SCIFB, 0x0d60),
+	INTC_VECT(FLCTL_FLSTEI, 0x0d80), INTC_VECT(FLCTL_FLTENDI, 0x0da0),
+	INTC_VECT(FLCTL_FLTREQ0I, 0x0dc0), INTC_VECT(FLCTL_FLTREQ1I, 0x0de0),
+	INTC_VECT(SDHI0, 0x0e00), INTC_VECT(SDHI0, 0x0e20),
+	INTC_VECT(SDHI0, 0x0e40), INTC_VECT(SDHI0, 0x0e60),
+	INTC_VECT(SDHI1, 0x0e80), INTC_VECT(SDHI1, 0x0ea0),
+	INTC_VECT(SDHI1, 0x0ec0),
+	INTC_VECT(IRREM, 0x0f60),
+	INTC_VECT(IRDA, 0x0480),
+	INTC_VECT(TPU0, 0x04a0),
+	INTC_VECT(TTI20, 0x1100),
+	INTC_VECT(DDM, 0x1140),
+	INTC_VECT(SDHI2, 0x1200), INTC_VECT(SDHI2, 0x1220),
+	INTC_VECT(SDHI2, 0x1240), INTC_VECT(SDHI2, 0x1260),
+	INTC_VECT(RWDT0, 0x1280),
+	INTC_VECT(DMAC1_1_DEI0, 0x2000), INTC_VECT(DMAC1_1_DEI1, 0x2020),
+	INTC_VECT(DMAC1_1_DEI2, 0x2040), INTC_VECT(DMAC1_1_DEI3, 0x2060),
+	INTC_VECT(DMAC1_2_DEI4, 0x2080), INTC_VECT(DMAC1_2_DEI5, 0x20a0),
+	INTC_VECT(DMAC1_2_DADERR, 0x20c0),
+	INTC_VECT(DMAC2_1_DEI0, 0x2100), INTC_VECT(DMAC2_1_DEI1, 0x2120),
+	INTC_VECT(DMAC2_1_DEI2, 0x2140), INTC_VECT(DMAC2_1_DEI3, 0x2160),
+	INTC_VECT(DMAC2_2_DEI4, 0x2180), INTC_VECT(DMAC2_2_DEI5, 0x21a0),
+	INTC_VECT(DMAC2_2_DADERR, 0x21c0),
+	INTC_VECT(DMAC3_1_DEI0, 0x2200), INTC_VECT(DMAC3_1_DEI1, 0x2220),
+	INTC_VECT(DMAC3_1_DEI2, 0x2240), INTC_VECT(DMAC3_1_DEI3, 0x2260),
+	INTC_VECT(DMAC3_2_DEI4, 0x2280), INTC_VECT(DMAC3_2_DEI5, 0x22a0),
+	INTC_VECT(DMAC3_2_DADERR, 0x22c0),
+	INTC_VECT(SHWYSTAT_RT, 0x1300), INTC_VECT(SHWYSTAT_HS, 0x1320),
+	INTC_VECT(SHWYSTAT_COM, 0x1340),
+	INTC_VECT(HDMI, 0x17e0),
+	INTC_VECT(SPU2_SPU0, 0x1800), INTC_VECT(SPU2_SPU1, 0x1820),
+	INTC_VECT(FSI, 0x1840),
+	INTC_VECT(FMSI, 0x1860),
+	INTC_VECT(MIPI_HSI, 0x18e0),
+	INTC_VECT(IPMMU_IPMMUD, 0x1920),
+	INTC_VECT(CEC_1, 0x1940), INTC_VECT(CEC_2, 0x1960),
+	INTC_VECT(AP_ARM_CTIIRQ, 0x1980),
+	INTC_VECT(AP_ARM_DMAEXTERRIRQ, 0x19a0),
+	INTC_VECT(AP_ARM_DMAIRQ, 0x19c0),
+	INTC_VECT(AP_ARM_DMASIRQ, 0x19e0),
+	INTC_VECT(MFIS2, 0x1a00),
+	INTC_VECT(CPORTR2S, 0x1a20),
+	INTC_VECT(CMT14, 0x1a40), INTC_VECT(CMT15, 0x1a60),
+	INTC_VECT(MMC_MMC_ERR, 0x1ac0), INTC_VECT(MMC_MMC_NOR, 0x1ae0),
+	INTC_VECT(IIC4_ALI4, 0x1b00), INTC_VECT(IIC4_TACKI4, 0x1b20),
+	INTC_VECT(IIC4_WAITI4, 0x1b40), INTC_VECT(IIC4_DTEI4, 0x1b60),
+	INTC_VECT(IIC3_ALI3, 0x1b80), INTC_VECT(IIC3_TACKI3, 0x1ba0),
+	INTC_VECT(IIC3_WAITI3, 0x1bc0), INTC_VECT(IIC3_DTEI3, 0x1be0),
+	INTC_VECT(USB0_USB0I1, 0x1c80), INTC_VECT(USB0_USB0I0, 0x1ca0),
+	INTC_VECT(USB1_USB1I1, 0x1cc0), INTC_VECT(USB1_USB1I0, 0x1ce0),
+	INTC_VECT(USBHSDMAC1_USHDMI, 0x1d00),
+};
+
+static struct intc_group intca_groups[] __initdata = {
+	INTC_GROUP(DMAC1_1, DMAC1_1_DEI0,
+		   DMAC1_1_DEI1, DMAC1_1_DEI2, DMAC1_1_DEI3),
+	INTC_GROUP(DMAC1_2, DMAC1_2_DEI4,
+		   DMAC1_2_DEI5, DMAC1_2_DADERR),
+	INTC_GROUP(DMAC2_1, DMAC2_1_DEI0,
+		   DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3),
+	INTC_GROUP(DMAC2_2, DMAC2_2_DEI4,
+		   DMAC2_2_DEI5, DMAC2_2_DADERR),
+	INTC_GROUP(DMAC3_1, DMAC3_1_DEI0,
+		   DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3),
+	INTC_GROUP(DMAC3_2, DMAC3_2_DEI4,
+		   DMAC3_2_DEI5, DMAC3_2_DADERR),
+	INTC_GROUP(AP_ARM1, AP_ARM_IRQPMU, AP_ARM_COMMTX, AP_ARM_COMMRX),
+	INTC_GROUP(AP_ARM2, AP_ARM_CTIIRQ, AP_ARM_DMAEXTERRIRQ,
+		   AP_ARM_DMAIRQ, AP_ARM_DMASIRQ),
+	INTC_GROUP(SPU2, SPU2_SPU0, SPU2_SPU1),
+	INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLTENDI,
+		   FLCTL_FLTREQ0I, FLCTL_FLTREQ1I),
+	INTC_GROUP(IIC1, IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1),
+	INTC_GROUP(SHWYSTAT, SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM),
+};
+
+static struct intc_mask_reg intca_mask_registers[] __initdata = {
+	{ 0xe6900040, 0xe6900060, 8, /* INTMSK00A / INTMSKCLR00A */
+	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+	{ 0xe6900044, 0xe6900064, 8, /* INTMSK10A / INTMSKCLR10A */
+	  { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+	{ 0xe6900048, 0xe6900068, 8, /* INTMSK20A / INTMSKCLR20A */
+	  { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
+	{ 0xe690004c, 0xe690006c, 8, /* INTMSK30A / INTMSKCLR30A */
+	  { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
+
+	{ 0xe6940080, 0xe69400c0, 8, /* IMR0A / IMCR0A */
+	  { DMAC2_1_DEI3, DMAC2_1_DEI2, DMAC2_1_DEI1, DMAC2_1_DEI0,
+	    AP_ARM_IRQPMU, 0, AP_ARM_COMMTX, AP_ARM_COMMRX } },
+	{ 0xe6940084, 0xe69400c4, 8, /* IMR1A / IMCR1A */
+	  { 0, CRYPT_STD, DIRC, 0,
+	    DMAC1_1_DEI3, DMAC1_1_DEI2, DMAC1_1_DEI1, DMAC1_1_DEI0 } },
+	{ 0xe6940088, 0xe69400c8, 8, /* IMR2A / IMCR2A */
+	  { 0, 0, 0, 0,
+	    BBIF1, BBIF2, MFI_MFIS, MFI_MFIM } },
+	{ 0xe694008c, 0xe69400cc, 8, /* IMR3A / IMCR3A */
+	  { DMAC3_1_DEI3, DMAC3_1_DEI2, DMAC3_1_DEI1, DMAC3_1_DEI0,
+	    DMAC3_2_DADERR, DMAC3_2_DEI5, DMAC3_2_DEI4, IRDA } },
+	{ 0xe6940090, 0xe69400d0, 8, /* IMR4A / IMCR4A */
+	  { DDM, 0, 0, 0,
+	    0, 0, 0, 0 } },
+	{ 0xe6940094, 0xe69400d4, 8, /* IMR5A / IMCR5A */
+	  { KEYSC_KEY, DMAC1_2_DADERR, DMAC1_2_DEI5, DMAC1_2_DEI4,
+	    SCIFA3, SCIFA2, SCIFA1, SCIFA0 } },
+	{ 0xe6940098, 0xe69400d8, 8, /* IMR6A / IMCR6A */
+	  { SCIFB, SCIFA5, SCIFA4, MSIOF1,
+	    0, 0, MSIOF2, 0 } },
+	{ 0xe694009c, 0xe69400dc, 8, /* IMR7A / IMCR7A */
+	  { DISABLED, DISABLED, ENABLED, ENABLED,
+	    FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLTENDI, FLCTL_FLSTEI } },
+	{ 0xe69400a0, 0xe69400e0, 8, /* IMR8A / IMCR8A */
+	  { 0, DISABLED, ENABLED, ENABLED,
+	    TTI20, USBHSDMAC0_USHDMI, 0, 0 } },
+	{ 0xe69400a4, 0xe69400e4, 8, /* IMR9A / IMCR9A */
+	  { CMT1_CMT13, CMT1_CMT12, CMT1_CMT11, CMT1_CMT10,
+	    CMT2, 0, 0, _3DG_SGX540 } },
+	{ 0xe69400a8, 0xe69400e8, 8, /* IMR10A / IMCR10A */
+	  { 0, DMAC2_2_DADERR, DMAC2_2_DEI5, DMAC2_2_DEI4,
+	    0, 0, 0, 0 } },
+	{ 0xe69400ac, 0xe69400ec, 8, /* IMR11A / IMCR11A */
+	  { IIC1_DTEI1, IIC1_WAITI1, IIC1_TACKI1, IIC1_ALI1,
+	    0, 0, IRREM, 0 } },
+	{ 0xe69400b0, 0xe69400f0, 8, /* IMR12A / IMCR12A */
+	  { 0, 0, TPU0, 0,
+	    0, 0, 0, 0 } },
+	{ 0xe69400b4, 0xe69400f4, 8, /* IMR13A / IMCR13A */
+	  { DISABLED, DISABLED, ENABLED, ENABLED,
+	    0, CMT3, 0, RWDT0 } },
+	{ 0xe6950080, 0xe69500c0, 8, /* IMR0A3 / IMCR0A3 */
+	  { SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM, 0,
+	    0, 0, 0, 0 } },
+	{ 0xe6950090, 0xe69500d0, 8, /* IMR4A3 / IMCR4A3 */
+	  { 0, 0, 0, 0,
+	    0, 0, 0, HDMI } },
+	{ 0xe6950094, 0xe69500d4, 8, /* IMR5A3 / IMCR5A3 */
+	  { SPU2_SPU0, SPU2_SPU1, FSI, FMSI,
+	    0, 0, 0, MIPI_HSI } },
+	{ 0xe6950098, 0xe69500d8, 8, /* IMR6A3 / IMCR6A3 */
+	  { 0, IPMMU_IPMMUD, CEC_1, CEC_2,
+	    AP_ARM_CTIIRQ, AP_ARM_DMAEXTERRIRQ,
+	    AP_ARM_DMAIRQ, AP_ARM_DMASIRQ } },
+	{ 0xe695009c, 0xe69500dc, 8, /* IMR7A3 / IMCR7A3 */
+	  { MFIS2, CPORTR2S, CMT14, CMT15,
+	    0, 0, MMC_MMC_ERR, MMC_MMC_NOR } },
+	{ 0xe69500a0, 0xe69500e0, 8, /* IMR8A3 / IMCR8A3 */
+	  { IIC4_ALI4, IIC4_TACKI4, IIC4_WAITI4, IIC4_DTEI4,
+	    IIC3_ALI3, IIC3_TACKI3, IIC3_WAITI3, IIC3_DTEI3 } },
+	{ 0xe69500a4, 0xe69500e4, 8, /* IMR9A3 / IMCR9A3 */
+	  { 0, 0, 0, 0,
+	    USB0_USB0I1, USB0_USB0I0, USB1_USB1I1, USB1_USB1I0 } },
+	{ 0xe69500a8, 0xe69500e8, 8, /* IMR10A3 / IMCR10A3 */
+	  { USBHSDMAC1_USHDMI, 0, 0, 0,
+	    0, 0, 0, 0 } },
+};
+
+static struct intc_prio_reg intca_prio_registers[] __initdata = {
+	{ 0xe6900010, 0, 32, 4, /* INTPRI00A */
+	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+	{ 0xe6900014, 0, 32, 4, /* INTPRI10A */
+	  { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+	{ 0xe6900018, 0, 32, 4, /* INTPRI20A */
+	  { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
+	{ 0xe690001c, 0, 32, 4, /* INTPRI30A */
+	  { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
+
+	{ 0xe6940000, 0, 16, 4, /* IPRAA */ { DMAC3_1, DMAC3_2, CMT2, 0 } },
+	{ 0xe6940004, 0, 16, 4, /* IPRBA */ { IRDA, 0, BBIF1, BBIF2 } },
+	{ 0xe6940008, 0, 16, 4, /* IPRCA */ { 0, CRYPT_STD,
+					      CMT1_CMT11, AP_ARM1 } },
+	{ 0xe694000c, 0, 16, 4, /* IPRDA */ { 0, 0,
+					      CMT1_CMT12, 0 } },
+	{ 0xe6940010, 0, 16, 4, /* IPREA */ { DMAC1_1, MFI_MFIS,
+					      MFI_MFIM, 0 } },
+	{ 0xe6940014, 0, 16, 4, /* IPRFA */ { KEYSC_KEY, DMAC1_2,
+					      _3DG_SGX540, CMT1_CMT10 } },
+	{ 0xe6940018, 0, 16, 4, /* IPRGA */ { SCIFA0, SCIFA1,
+					      SCIFA2, SCIFA3 } },
+	{ 0xe694001c, 0, 16, 4, /* IPRGH */ { MSIOF2, USBHSDMAC0_USHDMI,
+					      FLCTL, SDHI0 } },
+	{ 0xe6940020, 0, 16, 4, /* IPRIA */ { MSIOF1, SCIFA4,
+					      0/* MSU */, IIC1 } },
+	{ 0xe6940024, 0, 16, 4, /* IPRJA */ { DMAC2_1, DMAC2_2,
+					      0/* MSUG */, TTI20 } },
+	{ 0xe6940028, 0, 16, 4, /* IPRKA */ { 0, CMT1_CMT13, IRREM, SDHI1 } },
+	{ 0xe694002c, 0, 16, 4, /* IPRLA */ { TPU0, 0, 0, 0 } },
+	{ 0xe6940030, 0, 16, 4, /* IPRMA */ { 0, CMT3, 0, RWDT0 } },
+	{ 0xe6940034, 0, 16, 4, /* IPRNA */ { SCIFB, SCIFA5, 0, DDM } },
+	{ 0xe6940038, 0, 16, 4, /* IPROA */ { 0, 0, DIRC, SDHI2 } },
+	{ 0xe6950000, 0, 16, 4, /* IPRAA3 */ { SHWYSTAT, 0, 0, 0 } },
+	{ 0xe6950024, 0, 16, 4, /* IPRJA3 */ { 0, 0, 0, HDMI } },
+	{ 0xe6950028, 0, 16, 4, /* IPRKA3 */ { SPU2, 0, FSI, FMSI } },
+	{ 0xe695002c, 0, 16, 4, /* IPRLA3 */ { 0, 0, 0, MIPI_HSI } },
+	{ 0xe6950030, 0, 16, 4, /* IPRMA3 */ { IPMMU_IPMMUD, 0,
+					       CEC_1, CEC_2 } },
+	{ 0xe6950034, 0, 16, 4, /* IPRNA3 */ { AP_ARM2, 0, 0, 0 } },
+	{ 0xe6950038, 0, 16, 4, /* IPROA3 */ { MFIS2, CPORTR2S,
+					       CMT14, CMT15 } },
+	{ 0xe694003c, 0, 16, 4, /* IPRPA3 */ { 0, 0,
+					       MMC_MMC_ERR, MMC_MMC_NOR } },
+	{ 0xe6940040, 0, 16, 4, /* IPRQA3 */ { IIC4_ALI4, IIC4_TACKI4,
+					       IIC4_WAITI4, IIC4_DTEI4 } },
+	{ 0xe6940044, 0, 16, 4, /* IPRRA3 */ { IIC3_ALI3, IIC3_TACKI3,
+					       IIC3_WAITI3, IIC3_DTEI3 } },
+	{ 0xe6940048, 0, 16, 4, /* IPRSA3 */ { 0/*ERI*/, 0/*RXI*/,
+					       0/*TXI*/, 0/*TEI*/} },
+	{ 0xe694004c, 0, 16, 4, /* IPRTA3 */ { USB0_USB0I1, USB0_USB0I0,
+					       USB1_USB1I1, USB1_USB1I0 } },
+	{ 0xe6940050, 0, 16, 4, /* IPRUA3 */ { USBHSDMAC1_USHDMI, 0, 0, 0 } },
+};
+
+static struct intc_sense_reg intca_sense_registers[] __initdata = {
+	{ 0xe6900000, 32, 4, /* ICR1A */
+	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+	{ 0xe6900004, 32, 4, /* ICR2A */
+	  { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+	{ 0xe6900008, 32, 4, /* ICR3A */
+	  { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
+	{ 0xe690000c, 32, 4, /* ICR4A */
+	  { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
+};
+
+static struct intc_mask_reg intca_ack_registers[] __initdata = {
+	{ 0xe6900020, 0, 8, /* INTREQ00A */
+	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+	{ 0xe6900024, 0, 8, /* INTREQ10A */
+	  { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+	{ 0xe6900028, 0, 8, /* INTREQ20A */
+	  { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
+	{ 0xe690002c, 0, 8, /* INTREQ30A */
+	  { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
+};
+
+static struct intc_desc intca_desc __initdata = {
+	.name = "sh7372-intca",
+	.force_enable = ENABLED,
+	.force_disable = DISABLED,
+	.hw = INTC_HW_DESC(intca_vectors, intca_groups,
+			   intca_mask_registers, intca_prio_registers,
+			   intca_sense_registers, intca_ack_registers),
+};
+
+void __init sh7372_init_irq(void)
+{
+	register_intc_controller(&intca_desc);
+}
diff --git a/arch/arm/mach-shmobile/intc-sh7377.c b/arch/arm/mach-shmobile/intc-sh7377.c
new file mode 100644
index 000000000000..5c781e2d1897
--- /dev/null
+++ b/arch/arm/mach-shmobile/intc-sh7377.c
@@ -0,0 +1,352 @@
+/*
+ * sh7377 processor support - INTC hardware block
+ *
+ * Copyright (C) 2010  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/sh_intc.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+enum {
+	UNUSED_INTCA = 0,
+	ENABLED,
+	DISABLED,
+
+	/* interrupt sources INTCA */
+	IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A,
+	IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A,
+	IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A,
+	IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A,
+	DIRC,
+	_2DG,
+	CRYPT_STD,
+	IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1,
+	AP_ARM_IRQPMU, AP_ARM_COMMTX, AP_ARM_COMMRX,
+	MFI_MFIM, MFI_MFIS,
+	BBIF1, BBIF2,
+	USBDMAC_USHDMI,
+	USBHS_USHI0, USBHS_USHI1,
+	_3DG_SGX540,
+	CMT1_CMT10, CMT1_CMT11, CMT1_CMT12, CMT1_CMT13, CMT2, CMT3,
+	KEYSC_KEY,
+	SCIFA0, SCIFA1, SCIFA2, SCIFA3,
+	MSIOF2, MSIOF1,
+	SCIFA4, SCIFA5, SCIFB,
+	FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
+	SDHI0,
+	SDHI1,
+	MSU_MSU, MSU_MSU2,
+	IRREM,
+	MSUG,
+	IRDA,
+	TPU0, TPU1, TPU2, TPU3, TPU4,
+	LCRC,
+	PINTCA_PINT1, PINTCA_PINT2,
+	TTI20,
+	MISTY,
+	DDM,
+	RWDT0, RWDT1,
+	DMAC_1_DEI0, DMAC_1_DEI1, DMAC_1_DEI2, DMAC_1_DEI3,
+	DMAC_2_DEI4, DMAC_2_DEI5, DMAC_2_DADERR,
+	DMAC2_1_DEI0, DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3,
+	DMAC2_2_DEI4, DMAC2_2_DEI5, DMAC2_2_DADERR,
+	DMAC3_1_DEI0, DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3,
+	DMAC3_2_DEI4, DMAC3_2_DEI5, DMAC3_2_DADERR,
+	SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM,
+	ICUSB_ICUSB0, ICUSB_ICUSB1,
+	ICUDMC_ICUDMC1, ICUDMC_ICUDMC2,
+	SPU2_SPU0, SPU2_SPU1,
+	FSI,
+	FMSI,
+	SCUV,
+	IPMMU_IPMMUB,
+	AP_ARM_CTIIRQ, AP_ARM_DMAEXTERRIRQ, AP_ARM_DMAIRQ, AP_ARM_DMASIRQ,
+	MFIS2,
+	CPORTR2S,
+	CMT14, CMT15,
+	SCIFA6,
+
+	/* interrupt groups INTCA */
+	DMAC_1, DMAC_2,	DMAC2_1, DMAC2_2, DMAC3_1, DMAC3_2, SHWYSTAT,
+	AP_ARM1, AP_ARM2, USBHS, SPU2, FLCTL, IIC1,
+	ICUSB, ICUDMC
+};
+
+static struct intc_vect intca_vectors[] = {
+	INTC_VECT(IRQ0A, 0x0200), INTC_VECT(IRQ1A, 0x0220),
+	INTC_VECT(IRQ2A, 0x0240), INTC_VECT(IRQ3A, 0x0260),
+	INTC_VECT(IRQ4A, 0x0280), INTC_VECT(IRQ5A, 0x02a0),
+	INTC_VECT(IRQ6A, 0x02c0), INTC_VECT(IRQ7A, 0x02e0),
+	INTC_VECT(IRQ8A, 0x0300), INTC_VECT(IRQ9A, 0x0320),
+	INTC_VECT(IRQ10A, 0x0340), INTC_VECT(IRQ11A, 0x0360),
+	INTC_VECT(IRQ12A, 0x0380), INTC_VECT(IRQ13A, 0x03a0),
+	INTC_VECT(IRQ14A, 0x03c0), INTC_VECT(IRQ15A, 0x03e0),
+	INTC_VECT(IRQ16A, 0x3200), INTC_VECT(IRQ17A, 0x3220),
+	INTC_VECT(IRQ18A, 0x3240), INTC_VECT(IRQ19A, 0x3260),
+	INTC_VECT(IRQ20A, 0x3280), INTC_VECT(IRQ31A, 0x32a0),
+	INTC_VECT(IRQ22A, 0x32c0), INTC_VECT(IRQ23A, 0x32e0),
+	INTC_VECT(IRQ24A, 0x3300), INTC_VECT(IRQ25A, 0x3320),
+	INTC_VECT(IRQ26A, 0x3340), INTC_VECT(IRQ27A, 0x3360),
+	INTC_VECT(IRQ28A, 0x3380), INTC_VECT(IRQ29A, 0x33a0),
+	INTC_VECT(IRQ30A, 0x33c0), INTC_VECT(IRQ31A, 0x33e0),
+	INTC_VECT(DIRC, 0x0560),
+	INTC_VECT(_2DG, 0x05e0),
+	INTC_VECT(CRYPT_STD, 0x0700),
+	INTC_VECT(IIC1_ALI1, 0x0780), INTC_VECT(IIC1_TACKI1, 0x07a0),
+	INTC_VECT(IIC1_WAITI1, 0x07c0), INTC_VECT(IIC1_DTEI1, 0x07e0),
+	INTC_VECT(AP_ARM_IRQPMU, 0x0800), INTC_VECT(AP_ARM_COMMTX, 0x0840),
+	INTC_VECT(AP_ARM_COMMRX, 0x0860),
+	INTC_VECT(MFI_MFIM, 0x0900), INTC_VECT(MFI_MFIS, 0x0920),
+	INTC_VECT(BBIF1, 0x0940), INTC_VECT(BBIF2, 0x0960),
+	INTC_VECT(USBDMAC_USHDMI, 0x0a00),
+	INTC_VECT(USBHS_USHI0, 0x0a20), INTC_VECT(USBHS_USHI1, 0x0a40),
+	INTC_VECT(_3DG_SGX540, 0x0a60),
+	INTC_VECT(CMT1_CMT10, 0x0b00), INTC_VECT(CMT1_CMT11, 0x0b20),
+	INTC_VECT(CMT1_CMT12, 0x0b40), INTC_VECT(CMT1_CMT13, 0x0b60),
+	INTC_VECT(CMT2, 0x0b80), INTC_VECT(CMT3, 0x0ba0),
+	INTC_VECT(KEYSC_KEY, 0x0be0),
+	INTC_VECT(SCIFA0, 0x0c00), INTC_VECT(SCIFA1, 0x0c20),
+	INTC_VECT(SCIFA2, 0x0c40), INTC_VECT(SCIFA3, 0x0c60),
+	INTC_VECT(MSIOF2, 0x0c80), INTC_VECT(MSIOF1, 0x0d00),
+	INTC_VECT(SCIFA4, 0x0d20), INTC_VECT(SCIFA5, 0x0d40),
+	INTC_VECT(SCIFB, 0x0d60),
+	INTC_VECT(FLCTL_FLSTEI, 0x0d80), INTC_VECT(FLCTL_FLTENDI, 0x0da0),
+	INTC_VECT(FLCTL_FLTREQ0I, 0x0dc0), INTC_VECT(FLCTL_FLTREQ1I, 0x0de0),
+	INTC_VECT(SDHI0, 0x0e00), INTC_VECT(SDHI0, 0x0e20),
+	INTC_VECT(SDHI0, 0x0e40), INTC_VECT(SDHI0, 0x0e60),
+	INTC_VECT(SDHI1, 0x0e80), INTC_VECT(SDHI1, 0x0ea0),
+	INTC_VECT(SDHI1, 0x0ec0), INTC_VECT(SDHI1, 0x0ee0),
+	INTC_VECT(MSU_MSU, 0x0f20), INTC_VECT(MSU_MSU2, 0x0f40),
+	INTC_VECT(IRREM, 0x0f60),
+	INTC_VECT(MSUG, 0x0fa0),
+	INTC_VECT(IRDA, 0x0480),
+	INTC_VECT(TPU0, 0x04a0), INTC_VECT(TPU1, 0x04c0),
+	INTC_VECT(TPU2, 0x04e0), INTC_VECT(TPU3, 0x0500),
+	INTC_VECT(TPU4, 0x0520),
+	INTC_VECT(LCRC, 0x0540),
+	INTC_VECT(PINTCA_PINT1, 0x1000), INTC_VECT(PINTCA_PINT2, 0x1020),
+	INTC_VECT(TTI20, 0x1100),
+	INTC_VECT(MISTY, 0x1120),
+	INTC_VECT(DDM, 0x1140),
+	INTC_VECT(RWDT0, 0x1280), INTC_VECT(RWDT1, 0x12a0),
+	INTC_VECT(DMAC_1_DEI0, 0x2000), INTC_VECT(DMAC_1_DEI1, 0x2020),
+	INTC_VECT(DMAC_1_DEI2, 0x2040), INTC_VECT(DMAC_1_DEI3, 0x2060),
+	INTC_VECT(DMAC_2_DEI4, 0x2080), INTC_VECT(DMAC_2_DEI5, 0x20a0),
+	INTC_VECT(DMAC_2_DADERR, 0x20c0),
+	INTC_VECT(DMAC2_1_DEI0, 0x2100), INTC_VECT(DMAC2_1_DEI1, 0x2120),
+	INTC_VECT(DMAC2_1_DEI2, 0x2140), INTC_VECT(DMAC2_1_DEI3, 0x2160),
+	INTC_VECT(DMAC2_2_DEI4, 0x2180), INTC_VECT(DMAC2_2_DEI5, 0x21a0),
+	INTC_VECT(DMAC2_2_DADERR, 0x21c0),
+	INTC_VECT(DMAC3_1_DEI0, 0x2200), INTC_VECT(DMAC3_1_DEI1, 0x2220),
+	INTC_VECT(DMAC3_1_DEI2, 0x2240), INTC_VECT(DMAC3_1_DEI3, 0x2260),
+	INTC_VECT(DMAC3_2_DEI4, 0x2280), INTC_VECT(DMAC3_2_DEI5, 0x22a0),
+	INTC_VECT(DMAC3_2_DADERR, 0x22c0),
+	INTC_VECT(SHWYSTAT_RT, 0x1300), INTC_VECT(SHWYSTAT_HS, 0x1d20),
+	INTC_VECT(SHWYSTAT_COM, 0x1340),
+	INTC_VECT(ICUSB_ICUSB0, 0x1700), INTC_VECT(ICUSB_ICUSB1, 0x1720),
+	INTC_VECT(ICUDMC_ICUDMC1, 0x1780), INTC_VECT(ICUDMC_ICUDMC2, 0x17a0),
+	INTC_VECT(SPU2_SPU0, 0x1800), INTC_VECT(SPU2_SPU1, 0x1820),
+	INTC_VECT(FSI, 0x1840),
+	INTC_VECT(FMSI, 0x1860),
+	INTC_VECT(SCUV, 0x1880),
+	INTC_VECT(IPMMU_IPMMUB, 0x1900),
+	INTC_VECT(AP_ARM_CTIIRQ, 0x1980),
+	INTC_VECT(AP_ARM_DMAEXTERRIRQ, 0x19a0),
+	INTC_VECT(AP_ARM_DMAIRQ, 0x19c0),
+	INTC_VECT(AP_ARM_DMASIRQ, 0x19e0),
+	INTC_VECT(MFIS2, 0x1a00),
+	INTC_VECT(CPORTR2S, 0x1a20),
+	INTC_VECT(CMT14, 0x1a40), INTC_VECT(CMT15, 0x1a60),
+	INTC_VECT(SCIFA6, 0x1a80),
+};
+
+static struct intc_group intca_groups[] __initdata = {
+	INTC_GROUP(DMAC_1, DMAC_1_DEI0,
+		   DMAC_1_DEI1, DMAC_1_DEI2, DMAC_1_DEI3),
+	INTC_GROUP(DMAC_2, DMAC_2_DEI4,
+		   DMAC_2_DEI5, DMAC_2_DADERR),
+	INTC_GROUP(DMAC2_1, DMAC2_1_DEI0,
+		   DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3),
+	INTC_GROUP(DMAC2_2, DMAC2_2_DEI4,
+		   DMAC2_2_DEI5, DMAC2_2_DADERR),
+	INTC_GROUP(DMAC3_1, DMAC3_1_DEI0,
+		   DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3),
+	INTC_GROUP(DMAC3_2, DMAC3_2_DEI4,
+		   DMAC3_2_DEI5, DMAC3_2_DADERR),
+	INTC_GROUP(AP_ARM1, AP_ARM_IRQPMU, AP_ARM_COMMTX, AP_ARM_COMMTX),
+	INTC_GROUP(USBHS, USBHS_USHI0, USBHS_USHI1),
+	INTC_GROUP(SPU2, SPU2_SPU0, SPU2_SPU1),
+	INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLTENDI,
+		   FLCTL_FLTREQ0I, FLCTL_FLTREQ1I),
+	INTC_GROUP(IIC1, IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1),
+	INTC_GROUP(SHWYSTAT, SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM),
+	INTC_GROUP(ICUSB, ICUSB_ICUSB0, ICUSB_ICUSB1),
+	INTC_GROUP(ICUDMC, ICUDMC_ICUDMC1, ICUDMC_ICUDMC2),
+};
+
+static struct intc_mask_reg intca_mask_registers[] = {
+	{ 0xe6900040, 0xe6900060, 8, /* INTMSK00A / INTMSKCLR00A */
+	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+	{ 0xe6900044, 0xe6900064, 8, /* INTMSK10A / INTMSKCLR10A */
+	  { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+	{ 0xe6900048, 0xe6900068, 8, /* INTMSK20A / INTMSKCLR20A */
+	  { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
+	{ 0xe690004c, 0xe690006c, 8, /* INTMSK30A / INTMSKCLR30A */
+	  { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
+
+	{ 0xe6940080, 0xe69400c0, 8, /* IMR0A / IMCR0A */
+	  { DMAC2_1_DEI3, DMAC2_1_DEI2, DMAC2_1_DEI1, DMAC2_1_DEI0,
+	    AP_ARM_IRQPMU, 0, AP_ARM_COMMTX, AP_ARM_COMMRX } },
+	{ 0xe6940084, 0xe69400c4, 8, /* IMR1A / IMCR1A */
+	  { _2DG, CRYPT_STD, DIRC, 0,
+	    DMAC_1_DEI3, DMAC_1_DEI2, DMAC_1_DEI1, DMAC_1_DEI0 } },
+	{ 0xe6940088, 0xe69400c8, 8, /* IMR2A / IMCR2A */
+	  { PINTCA_PINT1, PINTCA_PINT2, 0, 0,
+	    BBIF1, BBIF2, MFI_MFIS, MFI_MFIM } },
+	{ 0xe694008c, 0xe69400cc, 8, /* IMR3A / IMCR3A */
+	  { DMAC3_1_DEI3, DMAC3_1_DEI2, DMAC3_1_DEI1, DMAC3_1_DEI0,
+	    DMAC3_2_DADERR, DMAC3_2_DEI5, DMAC3_2_DEI4, IRDA } },
+	{ 0xe6940090, 0xe69400d0, 8, /* IMR4A / IMCR4A */
+	  { DDM, 0, 0, 0,
+	    0, 0, 0, 0 } },
+	{ 0xe6940094, 0xe69400d4, 8, /* IMR5A / IMCR5A */
+	  { KEYSC_KEY, DMAC_2_DADERR, DMAC_2_DEI5, DMAC_2_DEI4,
+	    SCIFA3, SCIFA2, SCIFA1, SCIFA0 } },
+	{ 0xe6940098, 0xe69400d8, 8, /* IMR6A / IMCR6A */
+	  { SCIFB, SCIFA5, SCIFA4, MSIOF1,
+	    0, 0, MSIOF2, 0 } },
+	{ 0xe694009c, 0xe69400dc, 8, /* IMR7A / IMCR7A */
+	  { DISABLED, DISABLED, ENABLED, ENABLED,
+	    FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLTENDI, FLCTL_FLSTEI } },
+	{ 0xe69400a0, 0xe69400e0, 8, /* IMR8A / IMCR8A */
+	  { DISABLED, DISABLED, ENABLED, ENABLED,
+	    TTI20, USBDMAC_USHDMI, 0, MSUG } },
+	{ 0xe69400a4, 0xe69400e4, 8, /* IMR9A / IMCR9A */
+	  { CMT1_CMT13, CMT1_CMT12, CMT1_CMT11, CMT1_CMT10,
+	    CMT2, USBHS_USHI1, USBHS_USHI0, _3DG_SGX540 } },
+	{ 0xe69400a8, 0xe69400e8, 8, /* IMR10A / IMCR10A */
+	  { 0, DMAC2_2_DADERR, DMAC2_2_DEI5, DMAC2_2_DEI4,
+	    0, 0, 0, 0 } },
+	{ 0xe69400ac, 0xe69400ec, 8, /* IMR11A / IMCR11A */
+	  { IIC1_DTEI1, IIC1_WAITI1, IIC1_TACKI1, IIC1_ALI1,
+	    LCRC, MSU_MSU2, IRREM, MSU_MSU } },
+	{ 0xe69400b0, 0xe69400f0, 8, /* IMR12A / IMCR12A */
+	  { 0, 0, TPU0, TPU1,
+	    TPU2, TPU3, TPU4, 0 } },
+	{ 0xe69400b4, 0xe69400f4, 8, /* IMR13A / IMCR13A */
+	  { 0, 0, 0, 0,
+	    MISTY, CMT3, RWDT1, RWDT0 } },
+	{ 0xe6950080, 0xe69500c0, 8, /* IMR0A3 / IMCR0A3 */
+	  { SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM, 0,
+	    0, 0, 0, 0 } },
+	{ 0xe6950090, 0xe69500d0, 8, /* IMR4A3 / IMCR4A3 */
+	  { ICUSB_ICUSB0, ICUSB_ICUSB1, 0, 0,
+	    ICUDMC_ICUDMC1, ICUDMC_ICUDMC2, 0, 0 } },
+	{ 0xe6950094, 0xe69500d4, 8, /* IMR5A3 / IMCR5A3 */
+	  { SPU2_SPU0, SPU2_SPU1, FSI, FMSI,
+	    SCUV, 0, 0, 0 } },
+	{ 0xe6950098, 0xe69500d8, 8, /* IMR6A3 / IMCR6A3 */
+	  { IPMMU_IPMMUB, 0, 0, 0,
+	    AP_ARM_CTIIRQ, AP_ARM_DMAEXTERRIRQ,
+	    AP_ARM_DMAIRQ, AP_ARM_DMASIRQ } },
+	{ 0xe695009c, 0xe69500dc, 8, /* IMR7A3 / IMCR7A3 */
+	  { MFIS2, CPORTR2S, CMT14, CMT15,
+	    SCIFA6, 0, 0, 0 } },
+};
+
+static struct intc_prio_reg intca_prio_registers[] = {
+	{ 0xe6900010, 0, 32, 4, /* INTPRI00A */
+	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+	{ 0xe6900014, 0, 32, 4, /* INTPRI10A */
+	  { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+	{ 0xe6900018, 0, 32, 4, /* INTPRI10A */
+	  { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
+	{ 0xe690001c, 0, 32, 4, /* INTPRI30A */
+	  { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
+
+	{ 0xe6940000, 0, 16, 4, /* IPRAA */ { DMAC3_1, DMAC3_2, CMT2, LCRC } },
+	{ 0xe6940004, 0, 16, 4, /* IPRBA */ { IRDA, 0, BBIF1, BBIF2 } },
+	{ 0xe6940008, 0, 16, 4, /* IPRCA */ { _2DG, CRYPT_STD,
+					      CMT1_CMT11, AP_ARM1 } },
+	{ 0xe694000c, 0, 16, 4, /* IPRDA */ { PINTCA_PINT1, PINTCA_PINT2,
+					      CMT1_CMT12, TPU4 } },
+	{ 0xe6940010, 0, 16, 4, /* IPREA */ { DMAC_1, MFI_MFIS,
+					      MFI_MFIM, USBHS } },
+	{ 0xe6940014, 0, 16, 4, /* IPRFA */ { KEYSC_KEY, DMAC_2,
+					      _3DG_SGX540, CMT1_CMT10 } },
+	{ 0xe6940018, 0, 16, 4, /* IPRGA */ { SCIFA0, SCIFA1,
+					      SCIFA2, SCIFA3 } },
+	{ 0xe694001c, 0, 16, 4, /* IPRGH */ { MSIOF2, USBDMAC_USHDMI,
+					      FLCTL, SDHI0 } },
+	{ 0xe6940020, 0, 16, 4, /* IPRIA */ { MSIOF1, SCIFA4, MSU_MSU, IIC1 } },
+	{ 0xe6940024, 0, 16, 4, /* IPRJA */ { DMAC2_1, DMAC2_2, MSUG, TTI20 } },
+	{ 0xe6940028, 0, 16, 4, /* IPRKA */ { 0, CMT1_CMT13, IRREM, SDHI1 } },
+	{ 0xe694002c, 0, 16, 4, /* IPRLA */ { TPU0, TPU1, TPU2, TPU3 } },
+	{ 0xe6940030, 0, 16, 4, /* IPRMA */ { MISTY, CMT3, RWDT1, RWDT0 } },
+	{ 0xe6940034, 0, 16, 4, /* IPRNA */ { SCIFB, SCIFA5, 0, DDM } },
+	{ 0xe6940038, 0, 16, 4, /* IPROA */ { 0, 0, DIRC, 0 } },
+	{ 0xe6950000, 0, 16, 4, /* IPRAA3 */ { SHWYSTAT, 0, 0, 0 } },
+	{ 0xe6950020, 0, 16, 4, /* IPRIA3 */ { ICUSB, 0, 0, 0 } },
+	{ 0xe6950024, 0, 16, 4, /* IPRJA3 */ { ICUDMC, 0, 0, 0 } },
+	{ 0xe6950028, 0, 16, 4, /* IPRKA3 */ { SPU2, 0, FSI, FMSI } },
+	{ 0xe695002c, 0, 16, 4, /* IPRLA3 */ { SCUV, 0, 0, 0 } },
+	{ 0xe6950030, 0, 16, 4, /* IPRMA3 */ { IPMMU_IPMMUB, 0, 0, 0 } },
+	{ 0xe6950034, 0, 16, 4, /* IPRNA3 */ { AP_ARM2, 0, 0, 0 } },
+	{ 0xe6950038, 0, 16, 4, /* IPROA3 */ { MFIS2, CPORTR2S,
+					       CMT14, CMT15 } },
+	{ 0xe694003c, 0, 16, 4, /* IPRPA3 */ { SCIFA6, 0, 0, 0 } },
+};
+
+static struct intc_sense_reg intca_sense_registers[] __initdata = {
+	{ 0xe6900000, 16, 2, /* ICR1A */
+	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+	{ 0xe6900004, 16, 2, /* ICR2A */
+	  { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+	{ 0xe6900008, 16, 2, /* ICR3A */
+	  { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
+	{ 0xe690000c, 16, 2, /* ICR4A */
+	  { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
+};
+
+static struct intc_mask_reg intca_ack_registers[] __initdata = {
+	{ 0xe6900020, 0, 8, /* INTREQ00A */
+	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+	{ 0xe6900024, 0, 8, /* INTREQ10A */
+	  { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+	{ 0xe6900028, 0, 8, /* INTREQ20A */
+	  { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
+	{ 0xe690002c, 0, 8, /* INTREQ30A */
+	  { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
+};
+
+static struct intc_desc intca_desc __initdata = {
+	.name = "sh7377-intca",
+	.force_enable = ENABLED,
+	.force_disable = DISABLED,
+	.hw = INTC_HW_DESC(intca_vectors, intca_groups,
+			   intca_mask_registers, intca_prio_registers,
+			   intca_sense_registers, intca_ack_registers),
+};
+
+void __init sh7377_init_irq(void)
+{
+	register_intc_controller(&intca_desc);
+}
diff --git a/arch/arm/mach-shmobile/pfc-sh7367.c b/arch/arm/mach-shmobile/pfc-sh7367.c
new file mode 100644
index 000000000000..128555e76e43
--- /dev/null
+++ b/arch/arm/mach-shmobile/pfc-sh7367.c
@@ -0,0 +1,1801 @@
+/*
+ * sh7367 processor support - PFC hardware block
+ *
+ * Copyright (C) 2010  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <mach/sh7367.h>
+
+#define _1(fn, pfx, sfx) fn(pfx, sfx)
+
+#define _10(fn, pfx, sfx)				\
+	_1(fn, pfx##0, sfx), _1(fn, pfx##1, sfx),	\
+	_1(fn, pfx##2, sfx), _1(fn, pfx##3, sfx),	\
+	_1(fn, pfx##4, sfx), _1(fn, pfx##5, sfx),	\
+	_1(fn, pfx##6, sfx), _1(fn, pfx##7, sfx),	\
+	_1(fn, pfx##8, sfx), _1(fn, pfx##9, sfx)
+
+#define _90(fn, pfx, sfx)				\
+	_10(fn, pfx##1, sfx), _10(fn, pfx##2, sfx),	\
+	_10(fn, pfx##3, sfx), _10(fn, pfx##4, sfx),	\
+	_10(fn, pfx##5, sfx), _10(fn, pfx##6, sfx),	\
+	_10(fn, pfx##7, sfx), _10(fn, pfx##8, sfx),	\
+	_10(fn, pfx##9, sfx)
+
+#define _273(fn, pfx, sfx)		\
+	_10(fn, pfx, sfx), _90(fn, pfx, sfx),		\
+	_10(fn, pfx##10, sfx), _90(fn, pfx##1, sfx),	\
+	_10(fn, pfx##20, sfx), _10(fn, pfx##21, sfx),	\
+	_10(fn, pfx##22, sfx), _10(fn, pfx##23, sfx),	\
+	_10(fn, pfx##24, sfx), _10(fn, pfx##25, sfx),	\
+	_10(fn, pfx##26, sfx), _1(fn, pfx##270, sfx),	\
+	_1(fn, pfx##271, sfx), _1(fn, pfx##272, sfx)
+
+#define _PORT(pfx, sfx) pfx##_##sfx
+#define PORT_273(str) _273(_PORT, PORT, str)
+
+enum {
+	PINMUX_RESERVED = 0,
+
+	PINMUX_DATA_BEGIN,
+	PORT_273(DATA), /* PORT0_DATA -> PORT272_DATA */
+	PINMUX_DATA_END,
+
+	PINMUX_INPUT_BEGIN,
+	PORT_273(IN), /* PORT0_IN -> PORT272_IN */
+	PINMUX_INPUT_END,
+
+	PINMUX_INPUT_PULLUP_BEGIN,
+	PORT_273(IN_PU), /* PORT0_IN_PU -> PORT272_IN_PU */
+	PINMUX_INPUT_PULLUP_END,
+
+	PINMUX_INPUT_PULLDOWN_BEGIN,
+	PORT_273(IN_PD), /* PORT0_IN_PD -> PORT272_IN_PD */
+	PINMUX_INPUT_PULLDOWN_END,
+
+	PINMUX_OUTPUT_BEGIN,
+	PORT_273(OUT), /* PORT0_OUT -> PORT272_OUT */
+	PINMUX_OUTPUT_END,
+
+	PINMUX_FUNCTION_BEGIN,
+	PORT_273(FN_IN), /* PORT0_FN_IN -> PORT272_FN_IN */
+	PORT_273(FN_OUT), /* PORT0_FN_OUT -> PORT272_FN_OUT */
+	PORT_273(FN0), /* PORT0_FN0 -> PORT272_FN0 */
+	PORT_273(FN1), /* PORT0_FN1 -> PORT272_FN1 */
+	PORT_273(FN2), /* PORT0_FN2 -> PORT272_FN2 */
+	PORT_273(FN3), /* PORT0_FN3 -> PORT272_FN3 */
+	PORT_273(FN4), /* PORT0_FN4 -> PORT272_FN4 */
+	PORT_273(FN5), /* PORT0_FN5 -> PORT272_FN5 */
+	PORT_273(FN6), /* PORT0_FN6 -> PORT272_FN6 */
+	PORT_273(FN7), /* PORT0_FN7 -> PORT272_FN7 */
+
+	MSELBCR_MSEL2_1, MSELBCR_MSEL2_0,
+	PINMUX_FUNCTION_END,
+
+	PINMUX_MARK_BEGIN,
+	/* Special Pull-up / Pull-down Functions */
+	PORT48_KEYIN0_PU_MARK, PORT49_KEYIN1_PU_MARK,
+	PORT50_KEYIN2_PU_MARK, PORT55_KEYIN3_PU_MARK,
+	PORT56_KEYIN4_PU_MARK, PORT57_KEYIN5_PU_MARK,
+	PORT58_KEYIN6_PU_MARK,
+
+	/* 49-1 */
+	VBUS0_MARK, CPORT0_MARK, CPORT1_MARK, CPORT2_MARK,
+	CPORT3_MARK, CPORT4_MARK, CPORT5_MARK, CPORT6_MARK,
+	CPORT7_MARK, CPORT8_MARK, CPORT9_MARK, CPORT10_MARK,
+	CPORT11_MARK, SIN2_MARK, CPORT12_MARK, XCTS2_MARK,
+	CPORT13_MARK, RFSPO4_MARK, CPORT14_MARK, RFSPO5_MARK,
+	CPORT15_MARK, CPORT16_MARK, CPORT17_MARK, SOUT2_MARK,
+	CPORT18_MARK, XRTS2_MARK, CPORT19_MARK, CPORT20_MARK,
+	RFSPO6_MARK, CPORT21_MARK, STATUS0_MARK, CPORT22_MARK,
+	STATUS1_MARK, CPORT23_MARK, STATUS2_MARK, RFSPO7_MARK,
+	MPORT0_MARK, MPORT1_MARK, B_SYNLD1_MARK, B_SYNLD2_MARK,
+	XMAINPS_MARK, XDIVPS_MARK, XIDRST_MARK, IDCLK_MARK,
+	IDIO_MARK, SOUT1_MARK, SCIFA4_TXD_MARK,
+	M02_BERDAT_MARK, SIN1_MARK, SCIFA4_RXD_MARK, XWUP_MARK,
+	XRTS1_MARK, SCIFA4_RTS_MARK, M03_BERCLK_MARK,
+	XCTS1_MARK, SCIFA4_CTS_MARK,
+
+	/* 49-2 */
+	HSU_IQ_AGC6_MARK, MFG2_IN2_MARK, MSIOF2_MCK0_MARK,
+	HSU_IQ_AGC5_MARK, MFG2_IN1_MARK, MSIOF2_MCK1_MARK,
+	HSU_IQ_AGC4_MARK, MSIOF2_RSYNC_MARK,
+	HSU_IQ_AGC3_MARK, MFG2_OUT1_MARK, MSIOF2_RSCK_MARK,
+	HSU_IQ_AGC2_MARK, PORT42_KEYOUT0_MARK,
+	HSU_IQ_AGC1_MARK, PORT43_KEYOUT1_MARK,
+	HSU_IQ_AGC0_MARK, PORT44_KEYOUT2_MARK,
+	HSU_IQ_AGC_ST_MARK, PORT45_KEYOUT3_MARK,
+	HSU_IQ_PDO_MARK, PORT46_KEYOUT4_MARK,
+	HSU_IQ_PYO_MARK, PORT47_KEYOUT5_MARK,
+	HSU_EN_TXMUX_G3MO_MARK, PORT48_KEYIN0_MARK,
+	HSU_I_TXMUX_G3MO_MARK, PORT49_KEYIN1_MARK,
+	HSU_Q_TXMUX_G3MO_MARK, PORT50_KEYIN2_MARK,
+	HSU_SYO_MARK, PORT51_MSIOF2_TSYNC_MARK,
+	HSU_SDO_MARK, PORT52_MSIOF2_TSCK_MARK,
+	HSU_TGTTI_G3MO_MARK, PORT53_MSIOF2_TXD_MARK,
+	B_TIME_STAMP_MARK, PORT54_MSIOF2_RXD_MARK,
+	HSU_SDI_MARK, PORT55_KEYIN3_MARK,
+	HSU_SCO_MARK, PORT56_KEYIN4_MARK,
+	HSU_DREQ_MARK, PORT57_KEYIN5_MARK,
+	HSU_DACK_MARK, PORT58_KEYIN6_MARK,
+	HSU_CLK61M_MARK, PORT59_MSIOF2_SS1_MARK,
+	HSU_XRST_MARK, PORT60_MSIOF2_SS2_MARK,
+	PCMCLKO_MARK, SYNC8KO_MARK, DNPCM_A_MARK, UPPCM_A_MARK,
+	XTALB1L_MARK,
+	GPS_AGC1_MARK, SCIFA0_RTS_MARK,
+	GPS_AGC2_MARK, SCIFA0_SCK_MARK,
+	GPS_AGC3_MARK, SCIFA0_TXD_MARK,
+	GPS_AGC4_MARK, SCIFA0_RXD_MARK,
+	GPS_PWRD_MARK, SCIFA0_CTS_MARK,
+	GPS_IM_MARK, GPS_IS_MARK, GPS_QM_MARK, GPS_QS_MARK,
+	SIUBOMC_MARK, TPU2TO0_MARK,
+	SIUCKB_MARK, TPU2TO1_MARK,
+	SIUBOLR_MARK, BBIF2_TSYNC_MARK, TPU2TO2_MARK,
+	SIUBOBT_MARK, BBIF2_TSCK_MARK, TPU2TO3_MARK,
+	SIUBOSLD_MARK, BBIF2_TXD_MARK, TPU3TO0_MARK,
+	SIUBILR_MARK, TPU3TO1_MARK,
+	SIUBIBT_MARK, TPU3TO2_MARK,
+	SIUBISLD_MARK, TPU3TO3_MARK,
+	NMI_MARK, TPU4TO0_MARK,
+	DNPCM_M_MARK, TPU4TO1_MARK, TPU4TO2_MARK, TPU4TO3_MARK,
+	IRQ_TMPB_MARK,
+	PWEN_MARK, MFG1_OUT1_MARK,
+	OVCN_MARK, MFG1_IN1_MARK,
+	OVCN2_MARK, MFG1_IN2_MARK,
+
+	/* 49-3 */
+	RFSPO1_MARK, RFSPO2_MARK, RFSPO3_MARK, PORT93_VIO_CKO2_MARK,
+	USBTERM_MARK, EXTLP_MARK, IDIN_MARK,
+	SCIFA5_CTS_MARK, MFG0_IN1_MARK,
+	SCIFA5_RTS_MARK, MFG0_IN2_MARK,
+	SCIFA5_RXD_MARK,
+	SCIFA5_TXD_MARK,
+	SCIFA5_SCK_MARK, MFG0_OUT1_MARK,
+	A0_EA0_MARK, BS_MARK,
+	A14_EA14_MARK, PORT102_KEYOUT0_MARK,
+	A15_EA15_MARK, PORT103_KEYOUT1_MARK, DV_CLKOL_MARK,
+	A16_EA16_MARK, PORT104_KEYOUT2_MARK,
+	DV_VSYNCL_MARK, MSIOF0_SS1_MARK,
+	A17_EA17_MARK, PORT105_KEYOUT3_MARK,
+	DV_HSYNCL_MARK, MSIOF0_TSYNC_MARK,
+	A18_EA18_MARK, PORT106_KEYOUT4_MARK,
+	DV_DL0_MARK, MSIOF0_TSCK_MARK,
+	A19_EA19_MARK, PORT107_KEYOUT5_MARK,
+	DV_DL1_MARK, MSIOF0_TXD_MARK,
+	A20_EA20_MARK, PORT108_KEYIN0_MARK,
+	DV_DL2_MARK, MSIOF0_RSCK_MARK,
+	A21_EA21_MARK, PORT109_KEYIN1_MARK,
+	DV_DL3_MARK, MSIOF0_RSYNC_MARK,
+	A22_EA22_MARK, PORT110_KEYIN2_MARK,
+	DV_DL4_MARK, MSIOF0_MCK0_MARK,
+	A23_EA23_MARK, PORT111_KEYIN3_MARK,
+	DV_DL5_MARK, MSIOF0_MCK1_MARK,
+	A24_EA24_MARK, PORT112_KEYIN4_MARK,
+	DV_DL6_MARK, MSIOF0_RXD_MARK,
+	A25_EA25_MARK, PORT113_KEYIN5_MARK,
+	DV_DL7_MARK, MSIOF0_SS2_MARK,
+	A26_MARK, PORT113_KEYIN6_MARK, DV_CLKIL_MARK,
+	D0_ED0_NAF0_MARK, D1_ED1_NAF1_MARK, D2_ED2_NAF2_MARK,
+	D3_ED3_NAF3_MARK, D4_ED4_NAF4_MARK, D5_ED5_NAF5_MARK,
+	D6_ED6_NAF6_MARK, D7_ED7_NAF7_MARK, D8_ED8_NAF8_MARK,
+	D9_ED9_NAF9_MARK, D10_ED10_NAF10_MARK, D11_ED11_NAF11_MARK,
+	D12_ED12_NAF12_MARK, D13_ED13_NAF13_MARK,
+	D14_ED14_NAF14_MARK, D15_ED15_NAF15_MARK,
+	CS4_MARK, CS5A_MARK, CS5B_MARK, FCE1_MARK,
+	CS6B_MARK, XCS2_MARK, FCE0_MARK, CS6A_MARK,
+	DACK0_MARK, WAIT_MARK, DREQ0_MARK, RD_XRD_MARK,
+	A27_MARK, RDWR_XWE_MARK, WE0_XWR0_FWE_MARK,
+	WE1_XWR1_MARK, FRB_MARK, CKO_MARK,
+	NBRSTOUT_MARK, NBRST_MARK,
+
+	/* 49-4 */
+	RFSPO0_MARK, PORT146_VIO_CKO2_MARK, TSTMD_MARK,
+	VIO_VD_MARK, VIO_HD_MARK,
+	VIO_D0_MARK, VIO_D1_MARK, VIO_D2_MARK,
+	VIO_D3_MARK, VIO_D4_MARK, VIO_D5_MARK,
+	VIO_D6_MARK, VIO_D7_MARK, VIO_D8_MARK,
+	VIO_D9_MARK, VIO_D10_MARK, VIO_D11_MARK,
+	VIO_D12_MARK, VIO_D13_MARK, VIO_D14_MARK,
+	VIO_D15_MARK, VIO_CLK_MARK, VIO_FIELD_MARK,
+	VIO_CKO_MARK,
+	MFG3_IN1_MARK, MFG3_IN2_MARK,
+	M9_SLCD_A01_MARK, MFG3_OUT1_MARK, TPU0TO0_MARK,
+	M10_SLCD_CK1_MARK, MFG4_IN1_MARK, TPU0TO1_MARK,
+	M11_SLCD_SO1_MARK, MFG4_IN2_MARK, TPU0TO2_MARK,
+	M12_SLCD_CE1_MARK, MFG4_OUT1_MARK, TPU0TO3_MARK,
+	LCDD0_MARK, PORT175_KEYOUT0_MARK, DV_D0_MARK,
+	SIUCKA_MARK, MFG0_OUT2_MARK,
+	LCDD1_MARK, PORT176_KEYOUT1_MARK, DV_D1_MARK,
+	SIUAOLR_MARK, BBIF2_TSYNC1_MARK,
+	LCDD2_MARK, PORT177_KEYOUT2_MARK, DV_D2_MARK,
+	SIUAOBT_MARK, BBIF2_TSCK1_MARK,
+	LCDD3_MARK, PORT178_KEYOUT3_MARK, DV_D3_MARK,
+	SIUAOSLD_MARK, BBIF2_TXD1_MARK,
+	LCDD4_MARK, PORT179_KEYOUT4_MARK, DV_D4_MARK,
+	SIUAISPD_MARK, MFG1_OUT2_MARK,
+	LCDD5_MARK, PORT180_KEYOUT5_MARK, DV_D5_MARK,
+	SIUAILR_MARK, MFG2_OUT2_MARK,
+	LCDD6_MARK, DV_D6_MARK,
+	SIUAIBT_MARK, MFG3_OUT2_MARK, XWR2_MARK,
+	LCDD7_MARK, DV_D7_MARK,
+	SIUAISLD_MARK, MFG4_OUT2_MARK, XWR3_MARK,
+	LCDD8_MARK, DV_D8_MARK, D16_MARK, ED16_MARK,
+	LCDD9_MARK, DV_D9_MARK, D17_MARK, ED17_MARK,
+	LCDD10_MARK, DV_D10_MARK, D18_MARK, ED18_MARK,
+	LCDD11_MARK, DV_D11_MARK, D19_MARK, ED19_MARK,
+	LCDD12_MARK, DV_D12_MARK, D20_MARK, ED20_MARK,
+	LCDD13_MARK, DV_D13_MARK, D21_MARK, ED21_MARK,
+	LCDD14_MARK, DV_D14_MARK, D22_MARK, ED22_MARK,
+	LCDD15_MARK, DV_D15_MARK, D23_MARK, ED23_MARK,
+	LCDD16_MARK, DV_HSYNC_MARK, D24_MARK, ED24_MARK,
+	LCDD17_MARK, DV_VSYNC_MARK, D25_MARK, ED25_MARK,
+	LCDD18_MARK, DREQ2_MARK, MSIOF0L_TSCK_MARK,
+	D26_MARK, ED26_MARK,
+	LCDD19_MARK, MSIOF0L_TSYNC_MARK,
+	D27_MARK, ED27_MARK,
+	LCDD20_MARK, TS_SPSYNC1_MARK, MSIOF0L_MCK0_MARK,
+	D28_MARK, ED28_MARK,
+	LCDD21_MARK, TS_SDAT1_MARK, MSIOF0L_MCK1_MARK,
+	D29_MARK, ED29_MARK,
+	LCDD22_MARK, TS_SDEN1_MARK, MSIOF0L_SS1_MARK,
+	D30_MARK, ED30_MARK,
+	LCDD23_MARK, TS_SCK1_MARK, MSIOF0L_SS2_MARK,
+	D31_MARK, ED31_MARK,
+	LCDDCK_MARK, LCDWR_MARK, DV_CKO_MARK, SIUAOSPD_MARK,
+	LCDRD_MARK, DACK2_MARK, MSIOF0L_RSYNC_MARK,
+
+	/* 49-5 */
+	LCDHSYN_MARK, LCDCS_MARK, LCDCS2_MARK, DACK3_MARK,
+	LCDDISP_MARK, LCDRS_MARK, DREQ3_MARK, MSIOF0L_RSCK_MARK,
+	LCDCSYN_MARK, LCDCSYN2_MARK, DV_CKI_MARK,
+	LCDLCLK_MARK, DREQ1_MARK, MSIOF0L_RXD_MARK,
+	LCDDON_MARK, LCDDON2_MARK, DACK1_MARK, MSIOF0L_TXD_MARK,
+	VIO_DR0_MARK, VIO_DR1_MARK, VIO_DR2_MARK, VIO_DR3_MARK,
+	VIO_DR4_MARK, VIO_DR5_MARK, VIO_DR6_MARK, VIO_DR7_MARK,
+	VIO_VDR_MARK, VIO_HDR_MARK,
+	VIO_CLKR_MARK, VIO_CKOR_MARK,
+	SCIFA1_TXD_MARK, GPS_PGFA0_MARK,
+	SCIFA1_SCK_MARK, GPS_PGFA1_MARK,
+	SCIFA1_RTS_MARK, GPS_EPPSINMON_MARK,
+	SCIFA1_RXD_MARK, SCIFA1_CTS_MARK,
+	MSIOF1_TXD_MARK, SCIFA1_TXD2_MARK, GPS_TXD_MARK,
+	MSIOF1_TSYNC_MARK, SCIFA1_CTS2_MARK, I2C_SDA2_MARK,
+	MSIOF1_TSCK_MARK, SCIFA1_SCK2_MARK,
+	MSIOF1_RXD_MARK, SCIFA1_RXD2_MARK, GPS_RXD_MARK,
+	MSIOF1_RSCK_MARK, SCIFA1_RTS2_MARK,
+	MSIOF1_RSYNC_MARK, I2C_SCL2_MARK,
+	MSIOF1_MCK0_MARK, MSIOF1_MCK1_MARK,
+	MSIOF1_SS1_MARK, EDBGREQ3_MARK,
+	MSIOF1_SS2_MARK,
+	PORT236_IROUT_MARK, IRDA_OUT_MARK,
+	IRDA_IN_MARK, IRDA_FIRSEL_MARK,
+	TPU1TO0_MARK, TS_SPSYNC3_MARK,
+	TPU1TO1_MARK, TS_SDAT3_MARK,
+	TPU1TO2_MARK, TS_SDEN3_MARK, PORT241_MSIOF2_SS1_MARK,
+	TPU1TO3_MARK, PORT242_MSIOF2_TSCK_MARK,
+	M13_BSW_MARK, PORT243_MSIOF2_TSYNC_MARK,
+	M14_GSW_MARK, PORT244_MSIOF2_TXD_MARK,
+	PORT245_IROUT_MARK, M15_RSW_MARK,
+	SOUT3_MARK, SCIFA2_TXD1_MARK,
+	SIN3_MARK, SCIFA2_RXD1_MARK,
+	XRTS3_MARK, SCIFA2_RTS1_MARK, PORT248_MSIOF2_SS2_MARK,
+	XCTS3_MARK, SCIFA2_CTS1_MARK, PORT249_MSIOF2_RXD_MARK,
+	DINT_MARK, SCIFA2_SCK1_MARK, TS_SCK3_MARK,
+	SDHICLK0_MARK, TCK2_MARK,
+	SDHICD0_MARK,
+	SDHID0_0_MARK, TMS2_MARK,
+	SDHID0_1_MARK, TDO2_MARK,
+	SDHID0_2_MARK, TDI2_MARK,
+	SDHID0_3_MARK, RTCK2_MARK,
+
+	/* 49-6 */
+	SDHICMD0_MARK, TRST2_MARK,
+	SDHIWP0_MARK, EDBGREQ2_MARK,
+	SDHICLK1_MARK, TCK3_MARK,
+	SDHID1_0_MARK, M11_SLCD_SO2_MARK,
+	TS_SPSYNC2_MARK, TMS3_MARK,
+	SDHID1_1_MARK, M9_SLCD_AO2_MARK,
+	TS_SDAT2_MARK, TDO3_MARK,
+	SDHID1_2_MARK, M10_SLCD_CK2_MARK,
+	TS_SDEN2_MARK, TDI3_MARK,
+	SDHID1_3_MARK, M12_SLCD_CE2_MARK,
+	TS_SCK2_MARK, RTCK3_MARK,
+	SDHICMD1_MARK, TRST3_MARK,
+	SDHICLK2_MARK, SCIFB_SCK_MARK,
+	SDHID2_0_MARK, SCIFB_TXD_MARK,
+	SDHID2_1_MARK, SCIFB_CTS_MARK,
+	SDHID2_2_MARK, SCIFB_RXD_MARK,
+	SDHID2_3_MARK, SCIFB_RTS_MARK,
+	SDHICMD2_MARK,
+	RESETOUTS_MARK,
+	DIVLOCK_MARK,
+	PINMUX_MARK_END,
+};
+
+#define PORT_DATA_I(nr) \
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_IN)
+
+#define PORT_DATA_I_PD(nr) \
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+		    PORT##nr##_IN, PORT##nr##_IN_PD)
+
+#define PORT_DATA_I_PU(nr) \
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+		    PORT##nr##_IN, PORT##nr##_IN_PU)
+
+#define PORT_DATA_I_PU_PD(nr) \
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+		    PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
+
+#define PORT_DATA_O(nr) \
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT)
+
+#define PORT_DATA_IO(nr) \
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+		    PORT##nr##_IN)
+
+#define PORT_DATA_IO_PD(nr) \
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+		    PORT##nr##_IN, PORT##nr##_IN_PD)
+
+#define PORT_DATA_IO_PU(nr) \
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+		    PORT##nr##_IN, PORT##nr##_IN_PU)
+
+#define PORT_DATA_IO_PU_PD(nr) \
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+		    PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
+
+
+static pinmux_enum_t pinmux_data[] = {
+
+	/* specify valid pin states for each pin in GPIO mode */
+
+	/* 49-1 (GPIO) */
+	PORT_DATA_I_PD(0),
+	PORT_DATA_I_PU(1), PORT_DATA_I_PU(2), PORT_DATA_I_PU(3),
+	PORT_DATA_I_PU(4), PORT_DATA_I_PU(5), PORT_DATA_I_PU(6),
+	PORT_DATA_I_PU(7), PORT_DATA_I_PU(8), PORT_DATA_I_PU(9),
+	PORT_DATA_I_PU(10), PORT_DATA_I_PU(11), PORT_DATA_I_PU(12),
+	PORT_DATA_I_PU(13),
+	PORT_DATA_IO_PU_PD(14), PORT_DATA_IO_PU_PD(15),
+	PORT_DATA_O(16), PORT_DATA_O(17), PORT_DATA_O(18), PORT_DATA_O(19),
+	PORT_DATA_O(20), PORT_DATA_O(21), PORT_DATA_O(22), PORT_DATA_O(23),
+	PORT_DATA_O(24), PORT_DATA_O(25), PORT_DATA_O(26),
+	PORT_DATA_I_PD(27), PORT_DATA_I_PD(28),
+	PORT_DATA_O(29), PORT_DATA_O(30), PORT_DATA_O(31), PORT_DATA_O(32),
+	PORT_DATA_IO_PU(33),
+	PORT_DATA_O(34),
+	PORT_DATA_I_PU(35),
+	PORT_DATA_O(36),
+	PORT_DATA_I_PU_PD(37),
+
+	/* 49-2 (GPIO) */
+	PORT_DATA_IO_PU_PD(38),
+	PORT_DATA_IO_PD(39), PORT_DATA_IO_PD(40), PORT_DATA_IO_PD(41),
+	PORT_DATA_O(42), PORT_DATA_O(43), PORT_DATA_O(44), PORT_DATA_O(45),
+	PORT_DATA_O(46), PORT_DATA_O(47),
+	PORT_DATA_I_PU_PD(48), PORT_DATA_I_PU_PD(49), PORT_DATA_I_PU_PD(50),
+	PORT_DATA_IO_PD(51), PORT_DATA_IO_PD(52),
+	PORT_DATA_O(53),
+	PORT_DATA_IO_PD(54),
+	PORT_DATA_I_PU_PD(55),
+	PORT_DATA_IO_PU_PD(56),
+	PORT_DATA_I_PU_PD(57),
+	PORT_DATA_IO_PU_PD(58),
+	PORT_DATA_O(59), PORT_DATA_O(60), PORT_DATA_O(61), PORT_DATA_O(62),
+	PORT_DATA_O(63),
+	PORT_DATA_I_PU(64),
+	PORT_DATA_O(65), PORT_DATA_O(66), PORT_DATA_O(67), PORT_DATA_O(68),
+	PORT_DATA_IO_PD(69), PORT_DATA_IO_PD(70),
+	PORT_DATA_I_PD(71), PORT_DATA_I_PD(72), PORT_DATA_I_PD(73),
+	PORT_DATA_I_PD(74),
+	PORT_DATA_IO_PU_PD(75), PORT_DATA_IO_PU_PD(76),
+	PORT_DATA_IO_PD(77), PORT_DATA_IO_PD(78),
+	PORT_DATA_O(79),
+	PORT_DATA_IO_PD(80), PORT_DATA_IO_PD(81), PORT_DATA_IO_PD(82),
+	PORT_DATA_IO_PU_PD(83), PORT_DATA_IO_PU_PD(84),
+	PORT_DATA_IO_PU_PD(85), PORT_DATA_IO_PU_PD(86),
+	PORT_DATA_I_PD(87),
+	PORT_DATA_IO_PU_PD(88),
+	PORT_DATA_I_PU_PD(89), PORT_DATA_I_PU_PD(90),
+
+	/* 49-3 (GPIO) */
+	PORT_DATA_O(91), PORT_DATA_O(92), PORT_DATA_O(93), PORT_DATA_O(94),
+	PORT_DATA_I_PU_PD(95),
+	PORT_DATA_IO_PU_PD(96), PORT_DATA_IO_PU_PD(97), PORT_DATA_IO_PU_PD(98),
+	PORT_DATA_IO_PU_PD(99),	PORT_DATA_IO_PU_PD(100),
+	PORT_DATA_IO(101), PORT_DATA_IO(102), PORT_DATA_IO(103),
+	PORT_DATA_IO_PD(104), PORT_DATA_IO_PD(105), PORT_DATA_IO_PD(106),
+	PORT_DATA_IO_PD(107),
+	PORT_DATA_IO_PU_PD(108), PORT_DATA_IO_PU_PD(109),
+	PORT_DATA_IO_PU_PD(110), PORT_DATA_IO_PU_PD(111),
+	PORT_DATA_IO_PU_PD(112), PORT_DATA_IO_PU_PD(113),
+	PORT_DATA_IO_PU_PD(114),
+	PORT_DATA_IO_PU(115), PORT_DATA_IO_PU(116), PORT_DATA_IO_PU(117),
+	PORT_DATA_IO_PU(118), PORT_DATA_IO_PU(119), PORT_DATA_IO_PU(120),
+	PORT_DATA_IO_PU(121), PORT_DATA_IO_PU(122), PORT_DATA_IO_PU(123),
+	PORT_DATA_IO_PU(124), PORT_DATA_IO_PU(125), PORT_DATA_IO_PU(126),
+	PORT_DATA_IO_PU(127), PORT_DATA_IO_PU(128), PORT_DATA_IO_PU(129),
+	PORT_DATA_IO_PU(130),
+	PORT_DATA_O(131), PORT_DATA_O(132), PORT_DATA_O(133),
+	PORT_DATA_IO_PU(134),
+	PORT_DATA_O(135), PORT_DATA_O(136),
+	PORT_DATA_I_PU_PD(137),
+	PORT_DATA_IO(138),
+	PORT_DATA_IO_PU_PD(139),
+	PORT_DATA_IO(140), PORT_DATA_IO(141),
+	PORT_DATA_I_PU(142),
+	PORT_DATA_O(143), PORT_DATA_O(144),
+	PORT_DATA_I_PU(145),
+
+	/* 49-4 (GPIO) */
+	PORT_DATA_O(146),
+	PORT_DATA_I_PU_PD(147),
+	PORT_DATA_I_PD(148), PORT_DATA_I_PD(149),
+	PORT_DATA_IO_PD(150), PORT_DATA_IO_PD(151), PORT_DATA_IO_PD(152),
+	PORT_DATA_IO_PD(153), PORT_DATA_IO_PD(154), PORT_DATA_IO_PD(155),
+	PORT_DATA_IO_PD(156), PORT_DATA_IO_PD(157), PORT_DATA_IO_PD(158),
+	PORT_DATA_IO_PD(159), PORT_DATA_IO_PD(160), PORT_DATA_IO_PD(161),
+	PORT_DATA_IO_PD(162), PORT_DATA_IO_PD(163), PORT_DATA_IO_PD(164),
+	PORT_DATA_IO_PD(165), PORT_DATA_IO_PD(166),
+	PORT_DATA_IO_PU_PD(167),
+	PORT_DATA_O(168),
+	PORT_DATA_I_PD(169), PORT_DATA_I_PD(170),
+	PORT_DATA_O(171),
+	PORT_DATA_IO_PD(172), PORT_DATA_IO_PD(173),
+	PORT_DATA_O(174),
+	PORT_DATA_IO_PD(175), PORT_DATA_IO_PD(176), PORT_DATA_IO_PD(177),
+	PORT_DATA_IO_PD(178), PORT_DATA_IO_PD(179), PORT_DATA_IO_PD(180),
+	PORT_DATA_IO_PD(181), PORT_DATA_IO_PD(182), PORT_DATA_IO_PD(183),
+	PORT_DATA_IO_PD(184), PORT_DATA_IO_PD(185), PORT_DATA_IO_PD(186),
+	PORT_DATA_IO_PD(187), PORT_DATA_IO_PD(188), PORT_DATA_IO_PD(189),
+	PORT_DATA_IO_PD(190), PORT_DATA_IO_PD(191), PORT_DATA_IO_PD(192),
+	PORT_DATA_IO_PD(193), PORT_DATA_IO_PD(194), PORT_DATA_IO_PD(195),
+	PORT_DATA_IO_PD(196), PORT_DATA_IO_PD(197), PORT_DATA_IO_PD(198),
+	PORT_DATA_O(199),
+	PORT_DATA_IO_PD(200),
+
+	/* 49-5 (GPIO) */
+	PORT_DATA_O(201),
+	PORT_DATA_IO_PD(202), PORT_DATA_IO_PD(203),
+	PORT_DATA_I(204),
+	PORT_DATA_O(205),
+	PORT_DATA_IO_PD(206), PORT_DATA_IO_PD(207), PORT_DATA_IO_PD(208),
+	PORT_DATA_IO_PD(209), PORT_DATA_IO_PD(210), PORT_DATA_IO_PD(211),
+	PORT_DATA_IO_PD(212), PORT_DATA_IO_PD(213), PORT_DATA_IO_PD(214),
+	PORT_DATA_IO_PD(215), PORT_DATA_IO_PD(216),
+	PORT_DATA_O(217),
+	PORT_DATA_I_PU_PD(218), PORT_DATA_I_PU_PD(219),
+	PORT_DATA_O(220), PORT_DATA_O(221), PORT_DATA_O(222),
+	PORT_DATA_I_PD(223),
+	PORT_DATA_I_PU_PD(224),
+	PORT_DATA_O(225),
+	PORT_DATA_IO_PD(226),
+	PORT_DATA_IO_PU_PD(227),
+	PORT_DATA_I_PD(228),
+	PORT_DATA_IO_PD(229), PORT_DATA_IO_PD(230),
+	PORT_DATA_I_PU_PD(231), PORT_DATA_I_PU_PD(232),
+	PORT_DATA_IO_PU_PD(233), PORT_DATA_IO_PU_PD(234),
+	PORT_DATA_I_PU_PD(235),
+	PORT_DATA_O(236),
+	PORT_DATA_I_PD(237),
+	PORT_DATA_IO_PU_PD(238), PORT_DATA_IO_PU_PD(239),
+	PORT_DATA_IO_PD(240), PORT_DATA_IO_PD(241),
+	PORT_DATA_IO_PD(242), PORT_DATA_IO_PD(243),
+	PORT_DATA_O(244),
+	PORT_DATA_IO_PU_PD(245),
+	PORT_DATA_O(246),
+	PORT_DATA_I_PD(247),
+	PORT_DATA_IO_PU_PD(248),
+	PORT_DATA_I_PU_PD(249),
+	PORT_DATA_IO_PD(250), PORT_DATA_IO_PD(251),
+	PORT_DATA_IO_PU_PD(252), PORT_DATA_IO_PU_PD(253),
+	PORT_DATA_IO_PU_PD(254), PORT_DATA_IO_PU_PD(255),
+	PORT_DATA_IO_PU_PD(256),
+
+	/* 49-6 (GPIO) */
+	PORT_DATA_IO_PU_PD(257), PORT_DATA_IO_PU_PD(258),
+	PORT_DATA_IO_PD(259),
+	PORT_DATA_IO_PU(260), PORT_DATA_IO_PU(261), PORT_DATA_IO_PU(262),
+	PORT_DATA_IO_PU(263), PORT_DATA_IO_PU(264),
+	PORT_DATA_O(265),
+	PORT_DATA_IO_PU(266), PORT_DATA_IO_PU(267), PORT_DATA_IO_PU(268),
+	PORT_DATA_IO_PU(269), PORT_DATA_IO_PU(270),
+	PORT_DATA_O(271),
+	PORT_DATA_I_PD(272),
+
+	/* Special Pull-up / Pull-down Functions */
+	PINMUX_DATA(PORT48_KEYIN0_PU_MARK, MSELBCR_MSEL2_1,
+		    PORT48_FN2, PORT48_IN_PU),
+	PINMUX_DATA(PORT49_KEYIN1_PU_MARK, MSELBCR_MSEL2_1,
+		    PORT49_FN2, PORT49_IN_PU),
+	PINMUX_DATA(PORT50_KEYIN2_PU_MARK, MSELBCR_MSEL2_1,
+		    PORT50_FN2, PORT50_IN_PU),
+	PINMUX_DATA(PORT55_KEYIN3_PU_MARK, MSELBCR_MSEL2_1,
+		    PORT55_FN2, PORT55_IN_PU),
+	PINMUX_DATA(PORT56_KEYIN4_PU_MARK, MSELBCR_MSEL2_1,
+		    PORT56_FN2, PORT56_IN_PU),
+	PINMUX_DATA(PORT57_KEYIN5_PU_MARK, MSELBCR_MSEL2_1,
+		    PORT57_FN2, PORT57_IN_PU),
+	PINMUX_DATA(PORT58_KEYIN6_PU_MARK, MSELBCR_MSEL2_1,
+		    PORT58_FN2, PORT58_IN_PU),
+
+	/* 49-1 (FN) */
+	PINMUX_DATA(VBUS0_MARK, PORT0_FN1),
+	PINMUX_DATA(CPORT0_MARK, PORT1_FN1),
+	PINMUX_DATA(CPORT1_MARK, PORT2_FN1),
+	PINMUX_DATA(CPORT2_MARK, PORT3_FN1),
+	PINMUX_DATA(CPORT3_MARK, PORT4_FN1),
+	PINMUX_DATA(CPORT4_MARK, PORT5_FN1),
+	PINMUX_DATA(CPORT5_MARK, PORT6_FN1),
+	PINMUX_DATA(CPORT6_MARK, PORT7_FN1),
+	PINMUX_DATA(CPORT7_MARK, PORT8_FN1),
+	PINMUX_DATA(CPORT8_MARK, PORT9_FN1),
+	PINMUX_DATA(CPORT9_MARK, PORT10_FN1),
+	PINMUX_DATA(CPORT10_MARK, PORT11_FN1),
+	PINMUX_DATA(CPORT11_MARK, PORT12_FN1),
+	PINMUX_DATA(SIN2_MARK, PORT12_FN2),
+	PINMUX_DATA(CPORT12_MARK, PORT13_FN1),
+	PINMUX_DATA(XCTS2_MARK, PORT13_FN2),
+	PINMUX_DATA(CPORT13_MARK, PORT14_FN1),
+	PINMUX_DATA(RFSPO4_MARK, PORT14_FN2),
+	PINMUX_DATA(CPORT14_MARK, PORT15_FN1),
+	PINMUX_DATA(RFSPO5_MARK, PORT15_FN2),
+	PINMUX_DATA(CPORT15_MARK, PORT16_FN1),
+	PINMUX_DATA(CPORT16_MARK, PORT17_FN1),
+	PINMUX_DATA(CPORT17_MARK, PORT18_FN1),
+	PINMUX_DATA(SOUT2_MARK, PORT18_FN2),
+	PINMUX_DATA(CPORT18_MARK, PORT19_FN1),
+	PINMUX_DATA(XRTS2_MARK, PORT19_FN1),
+	PINMUX_DATA(CPORT19_MARK, PORT20_FN1),
+	PINMUX_DATA(CPORT20_MARK, PORT21_FN1),
+	PINMUX_DATA(RFSPO6_MARK, PORT21_FN2),
+	PINMUX_DATA(CPORT21_MARK, PORT22_FN1),
+	PINMUX_DATA(STATUS0_MARK, PORT22_FN2),
+	PINMUX_DATA(CPORT22_MARK, PORT23_FN1),
+	PINMUX_DATA(STATUS1_MARK, PORT23_FN2),
+	PINMUX_DATA(CPORT23_MARK, PORT24_FN1),
+	PINMUX_DATA(STATUS2_MARK, PORT24_FN2),
+	PINMUX_DATA(RFSPO7_MARK, PORT24_FN3),
+	PINMUX_DATA(MPORT0_MARK, PORT25_FN1),
+	PINMUX_DATA(MPORT1_MARK, PORT26_FN1),
+	PINMUX_DATA(B_SYNLD1_MARK, PORT27_FN1),
+	PINMUX_DATA(B_SYNLD2_MARK, PORT28_FN1),
+	PINMUX_DATA(XMAINPS_MARK, PORT29_FN1),
+	PINMUX_DATA(XDIVPS_MARK, PORT30_FN1),
+	PINMUX_DATA(XIDRST_MARK, PORT31_FN1),
+	PINMUX_DATA(IDCLK_MARK, PORT32_FN1),
+	PINMUX_DATA(IDIO_MARK, PORT33_FN1),
+	PINMUX_DATA(SOUT1_MARK, PORT34_FN1),
+	PINMUX_DATA(SCIFA4_TXD_MARK, PORT34_FN2),
+	PINMUX_DATA(M02_BERDAT_MARK, PORT34_FN3),
+	PINMUX_DATA(SIN1_MARK, PORT35_FN1),
+	PINMUX_DATA(SCIFA4_RXD_MARK, PORT35_FN2),
+	PINMUX_DATA(XWUP_MARK, PORT35_FN3),
+	PINMUX_DATA(XRTS1_MARK, PORT36_FN1),
+	PINMUX_DATA(SCIFA4_RTS_MARK, PORT36_FN2),
+	PINMUX_DATA(M03_BERCLK_MARK, PORT36_FN3),
+	PINMUX_DATA(XCTS1_MARK, PORT37_FN1),
+	PINMUX_DATA(SCIFA4_CTS_MARK, PORT37_FN2),
+
+	/* 49-2 (FN) */
+	PINMUX_DATA(HSU_IQ_AGC6_MARK, PORT38_FN1),
+	PINMUX_DATA(MFG2_IN2_MARK, PORT38_FN2),
+	PINMUX_DATA(MSIOF2_MCK0_MARK, PORT38_FN3),
+	PINMUX_DATA(HSU_IQ_AGC5_MARK, PORT39_FN1),
+	PINMUX_DATA(MFG2_IN1_MARK, PORT39_FN2),
+	PINMUX_DATA(MSIOF2_MCK1_MARK, PORT39_FN3),
+	PINMUX_DATA(HSU_IQ_AGC4_MARK, PORT40_FN1),
+	PINMUX_DATA(MSIOF2_RSYNC_MARK, PORT40_FN3),
+	PINMUX_DATA(HSU_IQ_AGC3_MARK, PORT41_FN1),
+	PINMUX_DATA(MFG2_OUT1_MARK, PORT41_FN2),
+	PINMUX_DATA(MSIOF2_RSCK_MARK, PORT41_FN3),
+	PINMUX_DATA(HSU_IQ_AGC2_MARK, PORT42_FN1),
+	PINMUX_DATA(PORT42_KEYOUT0_MARK, MSELBCR_MSEL2_1, PORT42_FN2),
+	PINMUX_DATA(HSU_IQ_AGC1_MARK, PORT43_FN1),
+	PINMUX_DATA(PORT43_KEYOUT1_MARK, MSELBCR_MSEL2_1, PORT43_FN2),
+	PINMUX_DATA(HSU_IQ_AGC0_MARK, PORT44_FN1),
+	PINMUX_DATA(PORT44_KEYOUT2_MARK, MSELBCR_MSEL2_1, PORT44_FN2),
+	PINMUX_DATA(HSU_IQ_AGC_ST_MARK, PORT45_FN1),
+	PINMUX_DATA(PORT45_KEYOUT3_MARK, MSELBCR_MSEL2_1, PORT45_FN2),
+	PINMUX_DATA(HSU_IQ_PDO_MARK, PORT46_FN1),
+	PINMUX_DATA(PORT46_KEYOUT4_MARK, MSELBCR_MSEL2_1, PORT46_FN2),
+	PINMUX_DATA(HSU_IQ_PYO_MARK, PORT47_FN1),
+	PINMUX_DATA(PORT47_KEYOUT5_MARK, MSELBCR_MSEL2_1, PORT47_FN2),
+	PINMUX_DATA(HSU_EN_TXMUX_G3MO_MARK, PORT48_FN1),
+	PINMUX_DATA(PORT48_KEYIN0_MARK, MSELBCR_MSEL2_1, PORT48_FN2),
+	PINMUX_DATA(HSU_I_TXMUX_G3MO_MARK, PORT49_FN1),
+	PINMUX_DATA(PORT49_KEYIN1_MARK, MSELBCR_MSEL2_1, PORT49_FN2),
+	PINMUX_DATA(HSU_Q_TXMUX_G3MO_MARK, PORT50_FN1),
+	PINMUX_DATA(PORT50_KEYIN2_MARK, MSELBCR_MSEL2_1, PORT50_FN2),
+	PINMUX_DATA(HSU_SYO_MARK, PORT51_FN1),
+	PINMUX_DATA(PORT51_MSIOF2_TSYNC_MARK, PORT51_FN2),
+	PINMUX_DATA(HSU_SDO_MARK, PORT52_FN1),
+	PINMUX_DATA(PORT52_MSIOF2_TSCK_MARK, PORT52_FN2),
+	PINMUX_DATA(HSU_TGTTI_G3MO_MARK, PORT53_FN1),
+	PINMUX_DATA(PORT53_MSIOF2_TXD_MARK, PORT53_FN2),
+	PINMUX_DATA(B_TIME_STAMP_MARK, PORT54_FN1),
+	PINMUX_DATA(PORT54_MSIOF2_RXD_MARK, PORT54_FN2),
+	PINMUX_DATA(HSU_SDI_MARK, PORT55_FN1),
+	PINMUX_DATA(PORT55_KEYIN3_MARK, MSELBCR_MSEL2_1, PORT55_FN2),
+	PINMUX_DATA(HSU_SCO_MARK, PORT56_FN1),
+	PINMUX_DATA(PORT56_KEYIN4_MARK, MSELBCR_MSEL2_1, PORT56_FN2),
+	PINMUX_DATA(HSU_DREQ_MARK, PORT57_FN1),
+	PINMUX_DATA(PORT57_KEYIN5_MARK, MSELBCR_MSEL2_1, PORT57_FN2),
+	PINMUX_DATA(HSU_DACK_MARK, PORT58_FN1),
+	PINMUX_DATA(PORT58_KEYIN6_MARK, MSELBCR_MSEL2_1, PORT58_FN2),
+	PINMUX_DATA(HSU_CLK61M_MARK, PORT59_FN1),
+	PINMUX_DATA(PORT59_MSIOF2_SS1_MARK, PORT59_FN2),
+	PINMUX_DATA(HSU_XRST_MARK, PORT60_FN1),
+	PINMUX_DATA(PORT60_MSIOF2_SS2_MARK, PORT60_FN2),
+	PINMUX_DATA(PCMCLKO_MARK, PORT61_FN1),
+	PINMUX_DATA(SYNC8KO_MARK, PORT62_FN1),
+	PINMUX_DATA(DNPCM_A_MARK, PORT63_FN1),
+	PINMUX_DATA(UPPCM_A_MARK, PORT64_FN1),
+	PINMUX_DATA(XTALB1L_MARK, PORT65_FN1),
+	PINMUX_DATA(GPS_AGC1_MARK, PORT66_FN1),
+	PINMUX_DATA(SCIFA0_RTS_MARK, PORT66_FN2),
+	PINMUX_DATA(GPS_AGC2_MARK, PORT67_FN1),
+	PINMUX_DATA(SCIFA0_SCK_MARK, PORT67_FN2),
+	PINMUX_DATA(GPS_AGC3_MARK, PORT68_FN1),
+	PINMUX_DATA(SCIFA0_TXD_MARK, PORT68_FN2),
+	PINMUX_DATA(GPS_AGC4_MARK, PORT69_FN1),
+	PINMUX_DATA(SCIFA0_RXD_MARK, PORT69_FN2),
+	PINMUX_DATA(GPS_PWRD_MARK, PORT70_FN1),
+	PINMUX_DATA(SCIFA0_CTS_MARK, PORT70_FN2),
+	PINMUX_DATA(GPS_IM_MARK, PORT71_FN1),
+	PINMUX_DATA(GPS_IS_MARK, PORT72_FN1),
+	PINMUX_DATA(GPS_QM_MARK, PORT73_FN1),
+	PINMUX_DATA(GPS_QS_MARK, PORT74_FN1),
+	PINMUX_DATA(SIUBOMC_MARK, PORT75_FN1),
+	PINMUX_DATA(TPU2TO0_MARK, PORT75_FN3),
+	PINMUX_DATA(SIUCKB_MARK, PORT76_FN1),
+	PINMUX_DATA(TPU2TO1_MARK, PORT76_FN3),
+	PINMUX_DATA(SIUBOLR_MARK, PORT77_FN1),
+	PINMUX_DATA(BBIF2_TSYNC_MARK, PORT77_FN2),
+	PINMUX_DATA(TPU2TO2_MARK, PORT77_FN3),
+	PINMUX_DATA(SIUBOBT_MARK, PORT78_FN1),
+	PINMUX_DATA(BBIF2_TSCK_MARK, PORT78_FN2),
+	PINMUX_DATA(TPU2TO3_MARK, PORT78_FN3),
+	PINMUX_DATA(SIUBOSLD_MARK, PORT79_FN1),
+	PINMUX_DATA(BBIF2_TXD_MARK, PORT79_FN2),
+	PINMUX_DATA(TPU3TO0_MARK, PORT79_FN3),
+	PINMUX_DATA(SIUBILR_MARK, PORT80_FN1),
+	PINMUX_DATA(TPU3TO1_MARK, PORT80_FN3),
+	PINMUX_DATA(SIUBIBT_MARK, PORT81_FN1),
+	PINMUX_DATA(TPU3TO2_MARK, PORT81_FN3),
+	PINMUX_DATA(SIUBISLD_MARK, PORT82_FN1),
+	PINMUX_DATA(TPU3TO3_MARK, PORT82_FN3),
+	PINMUX_DATA(NMI_MARK, PORT83_FN1),
+	PINMUX_DATA(TPU4TO0_MARK, PORT83_FN3),
+	PINMUX_DATA(DNPCM_M_MARK, PORT84_FN1),
+	PINMUX_DATA(TPU4TO1_MARK, PORT84_FN3),
+	PINMUX_DATA(TPU4TO2_MARK, PORT85_FN3),
+	PINMUX_DATA(TPU4TO3_MARK, PORT86_FN3),
+	PINMUX_DATA(IRQ_TMPB_MARK, PORT87_FN1),
+	PINMUX_DATA(PWEN_MARK, PORT88_FN1),
+	PINMUX_DATA(MFG1_OUT1_MARK, PORT88_FN2),
+	PINMUX_DATA(OVCN_MARK, PORT89_FN1),
+	PINMUX_DATA(MFG1_IN1_MARK, PORT89_FN2),
+	PINMUX_DATA(OVCN2_MARK, PORT90_FN1),
+	PINMUX_DATA(MFG1_IN2_MARK, PORT90_FN2),
+
+	/* 49-3 (FN) */
+	PINMUX_DATA(RFSPO1_MARK, PORT91_FN1),
+	PINMUX_DATA(RFSPO2_MARK, PORT92_FN1),
+	PINMUX_DATA(RFSPO3_MARK, PORT93_FN1),
+	PINMUX_DATA(PORT93_VIO_CKO2_MARK, PORT93_FN2),
+	PINMUX_DATA(USBTERM_MARK, PORT94_FN1),
+	PINMUX_DATA(EXTLP_MARK, PORT94_FN2),
+	PINMUX_DATA(IDIN_MARK, PORT95_FN1),
+	PINMUX_DATA(SCIFA5_CTS_MARK, PORT96_FN1),
+	PINMUX_DATA(MFG0_IN1_MARK, PORT96_FN2),
+	PINMUX_DATA(SCIFA5_RTS_MARK, PORT97_FN1),
+	PINMUX_DATA(MFG0_IN2_MARK, PORT97_FN2),
+	PINMUX_DATA(SCIFA5_RXD_MARK, PORT98_FN1),
+	PINMUX_DATA(SCIFA5_TXD_MARK, PORT99_FN1),
+	PINMUX_DATA(SCIFA5_SCK_MARK, PORT100_FN1),
+	PINMUX_DATA(MFG0_OUT1_MARK, PORT100_FN2),
+	PINMUX_DATA(A0_EA0_MARK, PORT101_FN1),
+	PINMUX_DATA(BS_MARK, PORT101_FN2),
+	PINMUX_DATA(A14_EA14_MARK, PORT102_FN1),
+	PINMUX_DATA(PORT102_KEYOUT0_MARK, MSELBCR_MSEL2_0, PORT102_FN2),
+	PINMUX_DATA(A15_EA15_MARK, PORT103_FN1),
+	PINMUX_DATA(PORT103_KEYOUT1_MARK, MSELBCR_MSEL2_0, PORT103_FN2),
+	PINMUX_DATA(DV_CLKOL_MARK, PORT103_FN3),
+	PINMUX_DATA(A16_EA16_MARK, PORT104_FN1),
+	PINMUX_DATA(PORT104_KEYOUT2_MARK, MSELBCR_MSEL2_0, PORT104_FN2),
+	PINMUX_DATA(DV_VSYNCL_MARK, PORT104_FN3),
+	PINMUX_DATA(MSIOF0_SS1_MARK, PORT104_FN4),
+	PINMUX_DATA(A17_EA17_MARK, PORT105_FN1),
+	PINMUX_DATA(PORT105_KEYOUT3_MARK, MSELBCR_MSEL2_0, PORT105_FN2),
+	PINMUX_DATA(DV_HSYNCL_MARK, PORT105_FN3),
+	PINMUX_DATA(MSIOF0_TSYNC_MARK, PORT105_FN4),
+	PINMUX_DATA(A18_EA18_MARK, PORT106_FN1),
+	PINMUX_DATA(PORT106_KEYOUT4_MARK, MSELBCR_MSEL2_0, PORT106_FN2),
+	PINMUX_DATA(DV_DL0_MARK, PORT106_FN3),
+	PINMUX_DATA(MSIOF0_TSCK_MARK, PORT106_FN4),
+	PINMUX_DATA(A19_EA19_MARK, PORT107_FN1),
+	PINMUX_DATA(PORT107_KEYOUT5_MARK, MSELBCR_MSEL2_0, PORT107_FN2),
+	PINMUX_DATA(DV_DL1_MARK, PORT107_FN3),
+	PINMUX_DATA(MSIOF0_TXD_MARK, PORT107_FN4),
+	PINMUX_DATA(A20_EA20_MARK, PORT108_FN1),
+	PINMUX_DATA(PORT108_KEYIN0_MARK, MSELBCR_MSEL2_0, PORT108_FN2),
+	PINMUX_DATA(DV_DL2_MARK, PORT108_FN3),
+	PINMUX_DATA(MSIOF0_RSCK_MARK, PORT108_FN4),
+	PINMUX_DATA(A21_EA21_MARK, PORT109_FN1),
+	PINMUX_DATA(PORT109_KEYIN1_MARK, MSELBCR_MSEL2_0, PORT109_FN2),
+	PINMUX_DATA(DV_DL3_MARK, PORT109_FN3),
+	PINMUX_DATA(MSIOF0_RSYNC_MARK, PORT109_FN4),
+	PINMUX_DATA(A22_EA22_MARK, PORT110_FN1),
+	PINMUX_DATA(PORT110_KEYIN2_MARK, MSELBCR_MSEL2_0, PORT110_FN2),
+	PINMUX_DATA(DV_DL4_MARK, PORT110_FN3),
+	PINMUX_DATA(MSIOF0_MCK0_MARK, PORT110_FN4),
+	PINMUX_DATA(A23_EA23_MARK, PORT111_FN1),
+	PINMUX_DATA(PORT111_KEYIN3_MARK, MSELBCR_MSEL2_0, PORT111_FN2),
+	PINMUX_DATA(DV_DL5_MARK, PORT111_FN3),
+	PINMUX_DATA(MSIOF0_MCK1_MARK, PORT111_FN4),
+	PINMUX_DATA(A24_EA24_MARK, PORT112_FN1),
+	PINMUX_DATA(PORT112_KEYIN4_MARK, MSELBCR_MSEL2_0, PORT112_FN2),
+	PINMUX_DATA(DV_DL6_MARK, PORT112_FN3),
+	PINMUX_DATA(MSIOF0_RXD_MARK, PORT112_FN4),
+	PINMUX_DATA(A25_EA25_MARK, PORT113_FN1),
+	PINMUX_DATA(PORT113_KEYIN5_MARK, MSELBCR_MSEL2_0, PORT113_FN2),
+	PINMUX_DATA(DV_DL7_MARK, PORT113_FN3),
+	PINMUX_DATA(MSIOF0_SS2_MARK, PORT113_FN4),
+	PINMUX_DATA(A26_MARK, PORT114_FN1),
+	PINMUX_DATA(PORT113_KEYIN6_MARK, MSELBCR_MSEL2_0, PORT114_FN2),
+	PINMUX_DATA(DV_CLKIL_MARK, PORT114_FN3),
+	PINMUX_DATA(D0_ED0_NAF0_MARK, PORT115_FN1),
+	PINMUX_DATA(D1_ED1_NAF1_MARK, PORT116_FN1),
+	PINMUX_DATA(D2_ED2_NAF2_MARK, PORT117_FN1),
+	PINMUX_DATA(D3_ED3_NAF3_MARK, PORT118_FN1),
+	PINMUX_DATA(D4_ED4_NAF4_MARK, PORT119_FN1),
+	PINMUX_DATA(D5_ED5_NAF5_MARK, PORT120_FN1),
+	PINMUX_DATA(D6_ED6_NAF6_MARK, PORT121_FN1),
+	PINMUX_DATA(D7_ED7_NAF7_MARK, PORT122_FN1),
+	PINMUX_DATA(D8_ED8_NAF8_MARK, PORT123_FN1),
+	PINMUX_DATA(D9_ED9_NAF9_MARK, PORT124_FN1),
+	PINMUX_DATA(D10_ED10_NAF10_MARK, PORT125_FN1),
+	PINMUX_DATA(D11_ED11_NAF11_MARK, PORT126_FN1),
+	PINMUX_DATA(D12_ED12_NAF12_MARK, PORT127_FN1),
+	PINMUX_DATA(D13_ED13_NAF13_MARK, PORT128_FN1),
+	PINMUX_DATA(D14_ED14_NAF14_MARK, PORT129_FN1),
+	PINMUX_DATA(D15_ED15_NAF15_MARK, PORT130_FN1),
+	PINMUX_DATA(CS4_MARK, PORT131_FN1),
+	PINMUX_DATA(CS5A_MARK, PORT132_FN1),
+	PINMUX_DATA(CS5B_MARK, PORT133_FN1),
+	PINMUX_DATA(FCE1_MARK, PORT133_FN2),
+	PINMUX_DATA(CS6B_MARK, PORT134_FN1),
+	PINMUX_DATA(XCS2_MARK, PORT134_FN2),
+	PINMUX_DATA(FCE0_MARK, PORT135_FN1),
+	PINMUX_DATA(CS6A_MARK, PORT136_FN1),
+	PINMUX_DATA(DACK0_MARK, PORT136_FN2),
+	PINMUX_DATA(WAIT_MARK, PORT137_FN1),
+	PINMUX_DATA(DREQ0_MARK, PORT137_FN2),
+	PINMUX_DATA(RD_XRD_MARK, PORT138_FN1),
+	PINMUX_DATA(A27_MARK, PORT139_FN1),
+	PINMUX_DATA(RDWR_XWE_MARK, PORT139_FN2),
+	PINMUX_DATA(WE0_XWR0_FWE_MARK, PORT140_FN1),
+	PINMUX_DATA(WE1_XWR1_MARK, PORT141_FN1),
+	PINMUX_DATA(FRB_MARK, PORT142_FN1),
+	PINMUX_DATA(CKO_MARK, PORT143_FN1),
+	PINMUX_DATA(NBRSTOUT_MARK, PORT144_FN1),
+	PINMUX_DATA(NBRST_MARK, PORT145_FN1),
+
+	/* 49-4 (FN) */
+	PINMUX_DATA(RFSPO0_MARK, PORT146_FN1),
+	PINMUX_DATA(PORT146_VIO_CKO2_MARK, PORT146_FN2),
+	PINMUX_DATA(TSTMD_MARK, PORT147_FN1),
+	PINMUX_DATA(VIO_VD_MARK, PORT148_FN1),
+	PINMUX_DATA(VIO_HD_MARK, PORT149_FN1),
+	PINMUX_DATA(VIO_D0_MARK, PORT150_FN1),
+	PINMUX_DATA(VIO_D1_MARK, PORT151_FN1),
+	PINMUX_DATA(VIO_D2_MARK, PORT152_FN1),
+	PINMUX_DATA(VIO_D3_MARK, PORT153_FN1),
+	PINMUX_DATA(VIO_D4_MARK, PORT154_FN1),
+	PINMUX_DATA(VIO_D5_MARK, PORT155_FN1),
+	PINMUX_DATA(VIO_D6_MARK, PORT156_FN1),
+	PINMUX_DATA(VIO_D7_MARK, PORT157_FN1),
+	PINMUX_DATA(VIO_D8_MARK, PORT158_FN1),
+	PINMUX_DATA(VIO_D9_MARK, PORT159_FN1),
+	PINMUX_DATA(VIO_D10_MARK, PORT160_FN1),
+	PINMUX_DATA(VIO_D11_MARK, PORT161_FN1),
+	PINMUX_DATA(VIO_D12_MARK, PORT162_FN1),
+	PINMUX_DATA(VIO_D13_MARK, PORT163_FN1),
+	PINMUX_DATA(VIO_D14_MARK, PORT164_FN1),
+	PINMUX_DATA(VIO_D15_MARK, PORT165_FN1),
+	PINMUX_DATA(VIO_CLK_MARK, PORT166_FN1),
+	PINMUX_DATA(VIO_FIELD_MARK, PORT167_FN1),
+	PINMUX_DATA(VIO_CKO_MARK, PORT168_FN1),
+	PINMUX_DATA(MFG3_IN1_MARK, PORT169_FN2),
+	PINMUX_DATA(MFG3_IN2_MARK, PORT170_FN2),
+	PINMUX_DATA(M9_SLCD_A01_MARK, PORT171_FN1),
+	PINMUX_DATA(MFG3_OUT1_MARK, PORT171_FN2),
+	PINMUX_DATA(TPU0TO0_MARK, PORT171_FN3),
+	PINMUX_DATA(M10_SLCD_CK1_MARK, PORT172_FN1),
+	PINMUX_DATA(MFG4_IN1_MARK, PORT172_FN2),
+	PINMUX_DATA(TPU0TO1_MARK, PORT172_FN3),
+	PINMUX_DATA(M11_SLCD_SO1_MARK, PORT173_FN1),
+	PINMUX_DATA(MFG4_IN2_MARK, PORT173_FN2),
+	PINMUX_DATA(TPU0TO2_MARK, PORT173_FN3),
+	PINMUX_DATA(M12_SLCD_CE1_MARK, PORT174_FN1),
+	PINMUX_DATA(MFG4_OUT1_MARK, PORT174_FN2),
+	PINMUX_DATA(TPU0TO3_MARK, PORT174_FN3),
+	PINMUX_DATA(LCDD0_MARK, PORT175_FN1),
+	PINMUX_DATA(PORT175_KEYOUT0_MARK, PORT175_FN2),
+	PINMUX_DATA(DV_D0_MARK, PORT175_FN3),
+	PINMUX_DATA(SIUCKA_MARK, PORT175_FN4),
+	PINMUX_DATA(MFG0_OUT2_MARK, PORT175_FN5),
+	PINMUX_DATA(LCDD1_MARK, PORT176_FN1),
+	PINMUX_DATA(PORT176_KEYOUT1_MARK, PORT176_FN2),
+	PINMUX_DATA(DV_D1_MARK, PORT176_FN3),
+	PINMUX_DATA(SIUAOLR_MARK, PORT176_FN4),
+	PINMUX_DATA(BBIF2_TSYNC1_MARK, PORT176_FN5),
+	PINMUX_DATA(LCDD2_MARK, PORT177_FN1),
+	PINMUX_DATA(PORT177_KEYOUT2_MARK, PORT177_FN2),
+	PINMUX_DATA(DV_D2_MARK, PORT177_FN3),
+	PINMUX_DATA(SIUAOBT_MARK, PORT177_FN4),
+	PINMUX_DATA(BBIF2_TSCK1_MARK, PORT177_FN5),
+	PINMUX_DATA(LCDD3_MARK, PORT178_FN1),
+	PINMUX_DATA(PORT178_KEYOUT3_MARK, PORT178_FN2),
+	PINMUX_DATA(DV_D3_MARK, PORT178_FN3),
+	PINMUX_DATA(SIUAOSLD_MARK, PORT178_FN4),
+	PINMUX_DATA(BBIF2_TXD1_MARK, PORT178_FN5),
+	PINMUX_DATA(LCDD4_MARK, PORT179_FN1),
+	PINMUX_DATA(PORT179_KEYOUT4_MARK, PORT179_FN2),
+	PINMUX_DATA(DV_D4_MARK, PORT179_FN3),
+	PINMUX_DATA(SIUAISPD_MARK, PORT179_FN4),
+	PINMUX_DATA(MFG1_OUT2_MARK, PORT179_FN5),
+	PINMUX_DATA(LCDD5_MARK, PORT180_FN1),
+	PINMUX_DATA(PORT180_KEYOUT5_MARK, PORT180_FN2),
+	PINMUX_DATA(DV_D5_MARK, PORT180_FN3),
+	PINMUX_DATA(SIUAILR_MARK, PORT180_FN4),
+	PINMUX_DATA(MFG2_OUT2_MARK, PORT180_FN5),
+	PINMUX_DATA(LCDD6_MARK, PORT181_FN1),
+	PINMUX_DATA(DV_D6_MARK, PORT181_FN3),
+	PINMUX_DATA(SIUAIBT_MARK, PORT181_FN4),
+	PINMUX_DATA(MFG3_OUT2_MARK, PORT181_FN5),
+	PINMUX_DATA(XWR2_MARK, PORT181_FN7),
+	PINMUX_DATA(LCDD7_MARK, PORT182_FN1),
+	PINMUX_DATA(DV_D7_MARK, PORT182_FN3),
+	PINMUX_DATA(SIUAISLD_MARK, PORT182_FN4),
+	PINMUX_DATA(MFG4_OUT2_MARK, PORT182_FN5),
+	PINMUX_DATA(XWR3_MARK, PORT182_FN7),
+	PINMUX_DATA(LCDD8_MARK, PORT183_FN1),
+	PINMUX_DATA(DV_D8_MARK, PORT183_FN3),
+	PINMUX_DATA(D16_MARK, PORT183_FN6),
+	PINMUX_DATA(ED16_MARK, PORT183_FN7),
+	PINMUX_DATA(LCDD9_MARK, PORT184_FN1),
+	PINMUX_DATA(DV_D9_MARK, PORT184_FN3),
+	PINMUX_DATA(D17_MARK, PORT184_FN6),
+	PINMUX_DATA(ED17_MARK, PORT184_FN7),
+	PINMUX_DATA(LCDD10_MARK, PORT185_FN1),
+	PINMUX_DATA(DV_D10_MARK, PORT185_FN3),
+	PINMUX_DATA(D18_MARK, PORT185_FN6),
+	PINMUX_DATA(ED18_MARK, PORT185_FN7),
+	PINMUX_DATA(LCDD11_MARK, PORT186_FN1),
+	PINMUX_DATA(DV_D11_MARK, PORT186_FN3),
+	PINMUX_DATA(D19_MARK, PORT186_FN6),
+	PINMUX_DATA(ED19_MARK, PORT186_FN7),
+	PINMUX_DATA(LCDD12_MARK, PORT187_FN1),
+	PINMUX_DATA(DV_D12_MARK, PORT187_FN3),
+	PINMUX_DATA(D20_MARK, PORT187_FN6),
+	PINMUX_DATA(ED20_MARK, PORT187_FN7),
+	PINMUX_DATA(LCDD13_MARK, PORT188_FN1),
+	PINMUX_DATA(DV_D13_MARK, PORT188_FN3),
+	PINMUX_DATA(D21_MARK, PORT188_FN6),
+	PINMUX_DATA(ED21_MARK, PORT188_FN7),
+	PINMUX_DATA(LCDD14_MARK, PORT189_FN1),
+	PINMUX_DATA(DV_D14_MARK, PORT189_FN3),
+	PINMUX_DATA(D22_MARK, PORT189_FN6),
+	PINMUX_DATA(ED22_MARK, PORT189_FN7),
+	PINMUX_DATA(LCDD15_MARK, PORT190_FN1),
+	PINMUX_DATA(DV_D15_MARK, PORT190_FN3),
+	PINMUX_DATA(D23_MARK, PORT190_FN6),
+	PINMUX_DATA(ED23_MARK, PORT190_FN7),
+	PINMUX_DATA(LCDD16_MARK, PORT191_FN1),
+	PINMUX_DATA(DV_HSYNC_MARK, PORT191_FN3),
+	PINMUX_DATA(D24_MARK, PORT191_FN6),
+	PINMUX_DATA(ED24_MARK, PORT191_FN7),
+	PINMUX_DATA(LCDD17_MARK, PORT192_FN1),
+	PINMUX_DATA(DV_VSYNC_MARK, PORT192_FN3),
+	PINMUX_DATA(D25_MARK, PORT192_FN6),
+	PINMUX_DATA(ED25_MARK, PORT192_FN7),
+	PINMUX_DATA(LCDD18_MARK, PORT193_FN1),
+	PINMUX_DATA(DREQ2_MARK, PORT193_FN2),
+	PINMUX_DATA(MSIOF0L_TSCK_MARK, PORT193_FN5),
+	PINMUX_DATA(D26_MARK, PORT193_FN6),
+	PINMUX_DATA(ED26_MARK, PORT193_FN7),
+	PINMUX_DATA(LCDD19_MARK, PORT194_FN1),
+	PINMUX_DATA(MSIOF0L_TSYNC_MARK, PORT194_FN5),
+	PINMUX_DATA(D27_MARK, PORT194_FN6),
+	PINMUX_DATA(ED27_MARK, PORT194_FN7),
+	PINMUX_DATA(LCDD20_MARK, PORT195_FN1),
+	PINMUX_DATA(TS_SPSYNC1_MARK, PORT195_FN2),
+	PINMUX_DATA(MSIOF0L_MCK0_MARK, PORT195_FN5),
+	PINMUX_DATA(D28_MARK, PORT195_FN6),
+	PINMUX_DATA(ED28_MARK, PORT195_FN7),
+	PINMUX_DATA(LCDD21_MARK, PORT196_FN1),
+	PINMUX_DATA(TS_SDAT1_MARK, PORT196_FN2),
+	PINMUX_DATA(MSIOF0L_MCK1_MARK, PORT196_FN5),
+	PINMUX_DATA(D29_MARK, PORT196_FN6),
+	PINMUX_DATA(ED29_MARK, PORT196_FN7),
+	PINMUX_DATA(LCDD22_MARK, PORT197_FN1),
+	PINMUX_DATA(TS_SDEN1_MARK, PORT197_FN2),
+	PINMUX_DATA(MSIOF0L_SS1_MARK, PORT197_FN5),
+	PINMUX_DATA(D30_MARK, PORT197_FN6),
+	PINMUX_DATA(ED30_MARK, PORT197_FN7),
+	PINMUX_DATA(LCDD23_MARK, PORT198_FN1),
+	PINMUX_DATA(TS_SCK1_MARK, PORT198_FN2),
+	PINMUX_DATA(MSIOF0L_SS2_MARK, PORT198_FN5),
+	PINMUX_DATA(D31_MARK, PORT198_FN6),
+	PINMUX_DATA(ED31_MARK, PORT198_FN7),
+	PINMUX_DATA(LCDDCK_MARK, PORT199_FN1),
+	PINMUX_DATA(LCDWR_MARK, PORT199_FN2),
+	PINMUX_DATA(DV_CKO_MARK, PORT199_FN3),
+	PINMUX_DATA(SIUAOSPD_MARK, PORT199_FN4),
+	PINMUX_DATA(LCDRD_MARK, PORT200_FN1),
+	PINMUX_DATA(DACK2_MARK, PORT200_FN2),
+	PINMUX_DATA(MSIOF0L_RSYNC_MARK, PORT200_FN5),
+
+	/* 49-5 (FN) */
+	PINMUX_DATA(LCDHSYN_MARK, PORT201_FN1),
+	PINMUX_DATA(LCDCS_MARK, PORT201_FN2),
+	PINMUX_DATA(LCDCS2_MARK, PORT201_FN3),
+	PINMUX_DATA(DACK3_MARK, PORT201_FN4),
+	PINMUX_DATA(LCDDISP_MARK, PORT202_FN1),
+	PINMUX_DATA(LCDRS_MARK, PORT202_FN2),
+	PINMUX_DATA(DREQ3_MARK, PORT202_FN4),
+	PINMUX_DATA(MSIOF0L_RSCK_MARK, PORT202_FN5),
+	PINMUX_DATA(LCDCSYN_MARK, PORT203_FN1),
+	PINMUX_DATA(LCDCSYN2_MARK, PORT203_FN2),
+	PINMUX_DATA(DV_CKI_MARK, PORT203_FN3),
+	PINMUX_DATA(LCDLCLK_MARK, PORT204_FN1),
+	PINMUX_DATA(DREQ1_MARK, PORT204_FN3),
+	PINMUX_DATA(MSIOF0L_RXD_MARK, PORT204_FN5),
+	PINMUX_DATA(LCDDON_MARK, PORT205_FN1),
+	PINMUX_DATA(LCDDON2_MARK, PORT205_FN2),
+	PINMUX_DATA(DACK1_MARK, PORT205_FN3),
+	PINMUX_DATA(MSIOF0L_TXD_MARK, PORT205_FN5),
+	PINMUX_DATA(VIO_DR0_MARK, PORT206_FN1),
+	PINMUX_DATA(VIO_DR1_MARK, PORT207_FN1),
+	PINMUX_DATA(VIO_DR2_MARK, PORT208_FN1),
+	PINMUX_DATA(VIO_DR3_MARK, PORT209_FN1),
+	PINMUX_DATA(VIO_DR4_MARK, PORT210_FN1),
+	PINMUX_DATA(VIO_DR5_MARK, PORT211_FN1),
+	PINMUX_DATA(VIO_DR6_MARK, PORT212_FN1),
+	PINMUX_DATA(VIO_DR7_MARK, PORT213_FN1),
+	PINMUX_DATA(VIO_VDR_MARK, PORT214_FN1),
+	PINMUX_DATA(VIO_HDR_MARK, PORT215_FN1),
+	PINMUX_DATA(VIO_CLKR_MARK, PORT216_FN1),
+	PINMUX_DATA(VIO_CKOR_MARK, PORT217_FN1),
+	PINMUX_DATA(SCIFA1_TXD_MARK, PORT220_FN2),
+	PINMUX_DATA(GPS_PGFA0_MARK, PORT220_FN3),
+	PINMUX_DATA(SCIFA1_SCK_MARK, PORT221_FN2),
+	PINMUX_DATA(GPS_PGFA1_MARK, PORT221_FN3),
+	PINMUX_DATA(SCIFA1_RTS_MARK, PORT222_FN2),
+	PINMUX_DATA(GPS_EPPSINMON_MARK, PORT222_FN3),
+	PINMUX_DATA(SCIFA1_RXD_MARK, PORT223_FN2),
+	PINMUX_DATA(SCIFA1_CTS_MARK, PORT224_FN2),
+	PINMUX_DATA(MSIOF1_TXD_MARK, PORT225_FN1),
+	PINMUX_DATA(SCIFA1_TXD2_MARK, PORT225_FN2),
+	PINMUX_DATA(GPS_TXD_MARK, PORT225_FN3),
+	PINMUX_DATA(MSIOF1_TSYNC_MARK, PORT226_FN1),
+	PINMUX_DATA(SCIFA1_CTS2_MARK, PORT226_FN2),
+	PINMUX_DATA(I2C_SDA2_MARK, PORT226_FN3),
+	PINMUX_DATA(MSIOF1_TSCK_MARK, PORT227_FN1),
+	PINMUX_DATA(SCIFA1_SCK2_MARK, PORT227_FN2),
+	PINMUX_DATA(MSIOF1_RXD_MARK, PORT228_FN1),
+	PINMUX_DATA(SCIFA1_RXD2_MARK, PORT228_FN2),
+	PINMUX_DATA(GPS_RXD_MARK, PORT228_FN3),
+	PINMUX_DATA(MSIOF1_RSCK_MARK, PORT229_FN1),
+	PINMUX_DATA(SCIFA1_RTS2_MARK, PORT229_FN2),
+	PINMUX_DATA(MSIOF1_RSYNC_MARK, PORT230_FN1),
+	PINMUX_DATA(I2C_SCL2_MARK, PORT230_FN3),
+	PINMUX_DATA(MSIOF1_MCK0_MARK, PORT231_FN1),
+	PINMUX_DATA(MSIOF1_MCK1_MARK, PORT232_FN1),
+	PINMUX_DATA(MSIOF1_SS1_MARK, PORT233_FN1),
+	PINMUX_DATA(EDBGREQ3_MARK, PORT233_FN2),
+	PINMUX_DATA(MSIOF1_SS2_MARK, PORT234_FN1),
+	PINMUX_DATA(PORT236_IROUT_MARK, PORT236_FN1),
+	PINMUX_DATA(IRDA_OUT_MARK, PORT236_FN2),
+	PINMUX_DATA(IRDA_IN_MARK, PORT237_FN2),
+	PINMUX_DATA(IRDA_FIRSEL_MARK, PORT238_FN1),
+	PINMUX_DATA(TPU1TO0_MARK, PORT239_FN3),
+	PINMUX_DATA(TS_SPSYNC3_MARK, PORT239_FN4),
+	PINMUX_DATA(TPU1TO1_MARK, PORT240_FN3),
+	PINMUX_DATA(TS_SDAT3_MARK, PORT240_FN4),
+	PINMUX_DATA(TPU1TO2_MARK, PORT241_FN3),
+	PINMUX_DATA(TS_SDEN3_MARK, PORT241_FN4),
+	PINMUX_DATA(PORT241_MSIOF2_SS1_MARK, PORT241_FN5),
+	PINMUX_DATA(TPU1TO3_MARK, PORT242_FN3),
+	PINMUX_DATA(PORT242_MSIOF2_TSCK_MARK, PORT242_FN5),
+	PINMUX_DATA(M13_BSW_MARK, PORT243_FN2),
+	PINMUX_DATA(PORT243_MSIOF2_TSYNC_MARK, PORT243_FN5),
+	PINMUX_DATA(M14_GSW_MARK, PORT244_FN2),
+	PINMUX_DATA(PORT244_MSIOF2_TXD_MARK, PORT244_FN5),
+	PINMUX_DATA(PORT245_IROUT_MARK, PORT245_FN1),
+	PINMUX_DATA(M15_RSW_MARK, PORT245_FN2),
+	PINMUX_DATA(SOUT3_MARK, PORT246_FN1),
+	PINMUX_DATA(SCIFA2_TXD1_MARK, PORT246_FN2),
+	PINMUX_DATA(SIN3_MARK, PORT247_FN1),
+	PINMUX_DATA(SCIFA2_RXD1_MARK, PORT247_FN2),
+	PINMUX_DATA(XRTS3_MARK, PORT248_FN1),
+	PINMUX_DATA(SCIFA2_RTS1_MARK, PORT248_FN2),
+	PINMUX_DATA(PORT248_MSIOF2_SS2_MARK, PORT248_FN5),
+	PINMUX_DATA(XCTS3_MARK, PORT249_FN1),
+	PINMUX_DATA(SCIFA2_CTS1_MARK, PORT249_FN2),
+	PINMUX_DATA(PORT249_MSIOF2_RXD_MARK, PORT249_FN5),
+	PINMUX_DATA(DINT_MARK, PORT250_FN1),
+	PINMUX_DATA(SCIFA2_SCK1_MARK, PORT250_FN2),
+	PINMUX_DATA(TS_SCK3_MARK, PORT250_FN4),
+	PINMUX_DATA(SDHICLK0_MARK, PORT251_FN1),
+	PINMUX_DATA(TCK2_MARK, PORT251_FN2),
+	PINMUX_DATA(SDHICD0_MARK, PORT252_FN1),
+	PINMUX_DATA(SDHID0_0_MARK, PORT253_FN1),
+	PINMUX_DATA(TMS2_MARK, PORT253_FN2),
+	PINMUX_DATA(SDHID0_1_MARK, PORT254_FN1),
+	PINMUX_DATA(TDO2_MARK, PORT254_FN2),
+	PINMUX_DATA(SDHID0_2_MARK, PORT255_FN1),
+	PINMUX_DATA(TDI2_MARK, PORT255_FN2),
+	PINMUX_DATA(SDHID0_3_MARK, PORT256_FN1),
+	PINMUX_DATA(RTCK2_MARK, PORT256_FN2),
+
+	/* 49-6 (FN) */
+	PINMUX_DATA(SDHICMD0_MARK, PORT257_FN1),
+	PINMUX_DATA(TRST2_MARK, PORT257_FN2),
+	PINMUX_DATA(SDHIWP0_MARK, PORT258_FN1),
+	PINMUX_DATA(EDBGREQ2_MARK, PORT258_FN2),
+	PINMUX_DATA(SDHICLK1_MARK, PORT259_FN1),
+	PINMUX_DATA(TCK3_MARK, PORT259_FN4),
+	PINMUX_DATA(SDHID1_0_MARK, PORT260_FN1),
+	PINMUX_DATA(M11_SLCD_SO2_MARK, PORT260_FN2),
+	PINMUX_DATA(TS_SPSYNC2_MARK, PORT260_FN3),
+	PINMUX_DATA(TMS3_MARK, PORT260_FN4),
+	PINMUX_DATA(SDHID1_1_MARK, PORT261_FN1),
+	PINMUX_DATA(M9_SLCD_AO2_MARK, PORT261_FN2),
+	PINMUX_DATA(TS_SDAT2_MARK, PORT261_FN3),
+	PINMUX_DATA(TDO3_MARK, PORT261_FN4),
+	PINMUX_DATA(SDHID1_2_MARK, PORT262_FN1),
+	PINMUX_DATA(M10_SLCD_CK2_MARK, PORT262_FN2),
+	PINMUX_DATA(TS_SDEN2_MARK, PORT262_FN3),
+	PINMUX_DATA(TDI3_MARK, PORT262_FN4),
+	PINMUX_DATA(SDHID1_3_MARK, PORT263_FN1),
+	PINMUX_DATA(M12_SLCD_CE2_MARK, PORT263_FN2),
+	PINMUX_DATA(TS_SCK2_MARK, PORT263_FN3),
+	PINMUX_DATA(RTCK3_MARK, PORT263_FN4),
+	PINMUX_DATA(SDHICMD1_MARK, PORT264_FN1),
+	PINMUX_DATA(TRST3_MARK, PORT264_FN4),
+	PINMUX_DATA(SDHICLK2_MARK, PORT265_FN1),
+	PINMUX_DATA(SCIFB_SCK_MARK, PORT265_FN2),
+	PINMUX_DATA(SDHID2_0_MARK, PORT266_FN1),
+	PINMUX_DATA(SCIFB_TXD_MARK, PORT266_FN2),
+	PINMUX_DATA(SDHID2_1_MARK, PORT267_FN1),
+	PINMUX_DATA(SCIFB_CTS_MARK, PORT267_FN2),
+	PINMUX_DATA(SDHID2_2_MARK, PORT268_FN1),
+	PINMUX_DATA(SCIFB_RXD_MARK, PORT268_FN2),
+	PINMUX_DATA(SDHID2_3_MARK, PORT269_FN1),
+	PINMUX_DATA(SCIFB_RTS_MARK, PORT269_FN2),
+	PINMUX_DATA(SDHICMD2_MARK, PORT270_FN1),
+	PINMUX_DATA(RESETOUTS_MARK, PORT271_FN1),
+	PINMUX_DATA(DIVLOCK_MARK, PORT272_FN1),
+};
+
+#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
+#define GPIO_PORT_273() _273(_GPIO_PORT, , unused)
+#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
+
+static struct pinmux_gpio pinmux_gpios[] = {
+	/* 49-1 -> 49-6 (GPIO) */
+	GPIO_PORT_273(),
+
+	/* Special Pull-up / Pull-down Functions */
+	GPIO_FN(PORT48_KEYIN0_PU), GPIO_FN(PORT49_KEYIN1_PU),
+	GPIO_FN(PORT50_KEYIN2_PU), GPIO_FN(PORT55_KEYIN3_PU),
+	GPIO_FN(PORT56_KEYIN4_PU), GPIO_FN(PORT57_KEYIN5_PU),
+	GPIO_FN(PORT58_KEYIN6_PU),
+
+	/* 49-1 (FN) */
+	GPIO_FN(VBUS0), GPIO_FN(CPORT0), GPIO_FN(CPORT1), GPIO_FN(CPORT2),
+	GPIO_FN(CPORT3), GPIO_FN(CPORT4), GPIO_FN(CPORT5), GPIO_FN(CPORT6),
+	GPIO_FN(CPORT7), GPIO_FN(CPORT8), GPIO_FN(CPORT9), GPIO_FN(CPORT10),
+	GPIO_FN(CPORT11), GPIO_FN(SIN2), GPIO_FN(CPORT12), GPIO_FN(XCTS2),
+	GPIO_FN(CPORT13), GPIO_FN(RFSPO4), GPIO_FN(CPORT14), GPIO_FN(RFSPO5),
+	GPIO_FN(CPORT15), GPIO_FN(CPORT16), GPIO_FN(CPORT17), GPIO_FN(SOUT2),
+	GPIO_FN(CPORT18), GPIO_FN(XRTS2), GPIO_FN(CPORT19), GPIO_FN(CPORT20),
+	GPIO_FN(RFSPO6), GPIO_FN(CPORT21), GPIO_FN(STATUS0), GPIO_FN(CPORT22),
+	GPIO_FN(STATUS1), GPIO_FN(CPORT23), GPIO_FN(STATUS2), GPIO_FN(RFSPO7),
+	GPIO_FN(MPORT0), GPIO_FN(MPORT1), GPIO_FN(B_SYNLD1), GPIO_FN(B_SYNLD2),
+	GPIO_FN(XMAINPS), GPIO_FN(XDIVPS), GPIO_FN(XIDRST), GPIO_FN(IDCLK),
+	GPIO_FN(IDIO), GPIO_FN(SOUT1), GPIO_FN(SCIFA4_TXD),
+	GPIO_FN(M02_BERDAT), GPIO_FN(SIN1), GPIO_FN(SCIFA4_RXD), GPIO_FN(XWUP),
+	GPIO_FN(XRTS1), GPIO_FN(SCIFA4_RTS), GPIO_FN(M03_BERCLK),
+	GPIO_FN(XCTS1), GPIO_FN(SCIFA4_CTS),
+
+	/* 49-2 (FN) */
+	GPIO_FN(HSU_IQ_AGC6), GPIO_FN(MFG2_IN2), GPIO_FN(MSIOF2_MCK0),
+	GPIO_FN(HSU_IQ_AGC5), GPIO_FN(MFG2_IN1), GPIO_FN(MSIOF2_MCK1),
+	GPIO_FN(HSU_IQ_AGC4), GPIO_FN(MSIOF2_RSYNC),
+	GPIO_FN(HSU_IQ_AGC3), GPIO_FN(MFG2_OUT1), GPIO_FN(MSIOF2_RSCK),
+	GPIO_FN(HSU_IQ_AGC2), GPIO_FN(PORT42_KEYOUT0),
+	GPIO_FN(HSU_IQ_AGC1), GPIO_FN(PORT43_KEYOUT1),
+	GPIO_FN(HSU_IQ_AGC0), GPIO_FN(PORT44_KEYOUT2),
+	GPIO_FN(HSU_IQ_AGC_ST), GPIO_FN(PORT45_KEYOUT3),
+	GPIO_FN(HSU_IQ_PDO), GPIO_FN(PORT46_KEYOUT4),
+	GPIO_FN(HSU_IQ_PYO), GPIO_FN(PORT47_KEYOUT5),
+	GPIO_FN(HSU_EN_TXMUX_G3MO), GPIO_FN(PORT48_KEYIN0),
+	GPIO_FN(HSU_I_TXMUX_G3MO), GPIO_FN(PORT49_KEYIN1),
+	GPIO_FN(HSU_Q_TXMUX_G3MO), GPIO_FN(PORT50_KEYIN2),
+	GPIO_FN(HSU_SYO), GPIO_FN(PORT51_MSIOF2_TSYNC),
+	GPIO_FN(HSU_SDO), GPIO_FN(PORT52_MSIOF2_TSCK),
+	GPIO_FN(HSU_TGTTI_G3MO), GPIO_FN(PORT53_MSIOF2_TXD),
+	GPIO_FN(B_TIME_STAMP), GPIO_FN(PORT54_MSIOF2_RXD),
+	GPIO_FN(HSU_SDI), GPIO_FN(PORT55_KEYIN3),
+	GPIO_FN(HSU_SCO), GPIO_FN(PORT56_KEYIN4),
+	GPIO_FN(HSU_DREQ), GPIO_FN(PORT57_KEYIN5),
+	GPIO_FN(HSU_DACK), GPIO_FN(PORT58_KEYIN6),
+	GPIO_FN(HSU_CLK61M), GPIO_FN(PORT59_MSIOF2_SS1),
+	GPIO_FN(HSU_XRST), GPIO_FN(PORT60_MSIOF2_SS2),
+	GPIO_FN(PCMCLKO), GPIO_FN(SYNC8KO), GPIO_FN(DNPCM_A), GPIO_FN(UPPCM_A),
+	GPIO_FN(XTALB1L),
+	GPIO_FN(GPS_AGC1), GPIO_FN(SCIFA0_RTS),
+	GPIO_FN(GPS_AGC2), GPIO_FN(SCIFA0_SCK),
+	GPIO_FN(GPS_AGC3), GPIO_FN(SCIFA0_TXD),
+	GPIO_FN(GPS_AGC4), GPIO_FN(SCIFA0_RXD),
+	GPIO_FN(GPS_PWRD), GPIO_FN(SCIFA0_CTS),
+	GPIO_FN(GPS_IM), GPIO_FN(GPS_IS), GPIO_FN(GPS_QM), GPIO_FN(GPS_QS),
+	GPIO_FN(SIUBOMC), GPIO_FN(TPU2TO0),
+	GPIO_FN(SIUCKB), GPIO_FN(TPU2TO1),
+	GPIO_FN(SIUBOLR), GPIO_FN(BBIF2_TSYNC), GPIO_FN(TPU2TO2),
+	GPIO_FN(SIUBOBT), GPIO_FN(BBIF2_TSCK), GPIO_FN(TPU2TO3),
+	GPIO_FN(SIUBOSLD), GPIO_FN(BBIF2_TXD), GPIO_FN(TPU3TO0),
+	GPIO_FN(SIUBILR), GPIO_FN(TPU3TO1),
+	GPIO_FN(SIUBIBT), GPIO_FN(TPU3TO2),
+	GPIO_FN(SIUBISLD), GPIO_FN(TPU3TO3),
+	GPIO_FN(NMI), GPIO_FN(TPU4TO0),
+	GPIO_FN(DNPCM_M), GPIO_FN(TPU4TO1), GPIO_FN(TPU4TO2), GPIO_FN(TPU4TO3),
+	GPIO_FN(IRQ_TMPB),
+	GPIO_FN(PWEN), GPIO_FN(MFG1_OUT1),
+	GPIO_FN(OVCN), GPIO_FN(MFG1_IN1),
+	GPIO_FN(OVCN2), GPIO_FN(MFG1_IN2),
+
+	/* 49-3 (FN) */
+	GPIO_FN(RFSPO1), GPIO_FN(RFSPO2), GPIO_FN(RFSPO3),
+	GPIO_FN(PORT93_VIO_CKO2),
+	GPIO_FN(USBTERM), GPIO_FN(EXTLP), GPIO_FN(IDIN),
+	GPIO_FN(SCIFA5_CTS), GPIO_FN(MFG0_IN1),
+	GPIO_FN(SCIFA5_RTS), GPIO_FN(MFG0_IN2),
+	GPIO_FN(SCIFA5_RXD),
+	GPIO_FN(SCIFA5_TXD),
+	GPIO_FN(SCIFA5_SCK), GPIO_FN(MFG0_OUT1),
+	GPIO_FN(A0_EA0), GPIO_FN(BS),
+	GPIO_FN(A14_EA14), GPIO_FN(PORT102_KEYOUT0),
+	GPIO_FN(A15_EA15), GPIO_FN(PORT103_KEYOUT1), GPIO_FN(DV_CLKOL),
+	GPIO_FN(A16_EA16), GPIO_FN(PORT104_KEYOUT2),
+	GPIO_FN(DV_VSYNCL), GPIO_FN(MSIOF0_SS1),
+	GPIO_FN(A17_EA17), GPIO_FN(PORT105_KEYOUT3),
+	GPIO_FN(DV_HSYNCL), GPIO_FN(MSIOF0_TSYNC),
+	GPIO_FN(A18_EA18), GPIO_FN(PORT106_KEYOUT4),
+	GPIO_FN(DV_DL0), GPIO_FN(MSIOF0_TSCK),
+	GPIO_FN(A19_EA19), GPIO_FN(PORT107_KEYOUT5),
+	GPIO_FN(DV_DL1), GPIO_FN(MSIOF0_TXD),
+	GPIO_FN(A20_EA20), GPIO_FN(PORT108_KEYIN0),
+	GPIO_FN(DV_DL2), GPIO_FN(MSIOF0_RSCK),
+	GPIO_FN(A21_EA21), GPIO_FN(PORT109_KEYIN1),
+	GPIO_FN(DV_DL3), GPIO_FN(MSIOF0_RSYNC),
+	GPIO_FN(A22_EA22), GPIO_FN(PORT110_KEYIN2),
+	GPIO_FN(DV_DL4), GPIO_FN(MSIOF0_MCK0),
+	GPIO_FN(A23_EA23), GPIO_FN(PORT111_KEYIN3),
+	GPIO_FN(DV_DL5), GPIO_FN(MSIOF0_MCK1),
+	GPIO_FN(A24_EA24), GPIO_FN(PORT112_KEYIN4),
+	GPIO_FN(DV_DL6), GPIO_FN(MSIOF0_RXD),
+	GPIO_FN(A25_EA25), GPIO_FN(PORT113_KEYIN5),
+	GPIO_FN(DV_DL7), GPIO_FN(MSIOF0_SS2),
+	GPIO_FN(A26), GPIO_FN(PORT113_KEYIN6), GPIO_FN(DV_CLKIL),
+	GPIO_FN(D0_ED0_NAF0), GPIO_FN(D1_ED1_NAF1), GPIO_FN(D2_ED2_NAF2),
+	GPIO_FN(D3_ED3_NAF3), GPIO_FN(D4_ED4_NAF4), GPIO_FN(D5_ED5_NAF5),
+	GPIO_FN(D6_ED6_NAF6), GPIO_FN(D7_ED7_NAF7), GPIO_FN(D8_ED8_NAF8),
+	GPIO_FN(D9_ED9_NAF9), GPIO_FN(D10_ED10_NAF10), GPIO_FN(D11_ED11_NAF11),
+	GPIO_FN(D12_ED12_NAF12), GPIO_FN(D13_ED13_NAF13),
+	GPIO_FN(D14_ED14_NAF14), GPIO_FN(D15_ED15_NAF15),
+	GPIO_FN(CS4), GPIO_FN(CS5A), GPIO_FN(CS5B), GPIO_FN(FCE1),
+	GPIO_FN(CS6B), GPIO_FN(XCS2), GPIO_FN(FCE0), GPIO_FN(CS6A),
+	GPIO_FN(DACK0), GPIO_FN(WAIT), GPIO_FN(DREQ0), GPIO_FN(RD_XRD),
+	GPIO_FN(A27), GPIO_FN(RDWR_XWE), GPIO_FN(WE0_XWR0_FWE),
+	GPIO_FN(WE1_XWR1), GPIO_FN(FRB), GPIO_FN(CKO),
+	GPIO_FN(NBRSTOUT), GPIO_FN(NBRST),
+
+	/* 49-4 (FN) */
+	GPIO_FN(RFSPO0), GPIO_FN(PORT146_VIO_CKO2), GPIO_FN(TSTMD),
+	GPIO_FN(VIO_VD), GPIO_FN(VIO_HD),
+	GPIO_FN(VIO_D0), GPIO_FN(VIO_D1), GPIO_FN(VIO_D2),
+	GPIO_FN(VIO_D3), GPIO_FN(VIO_D4), GPIO_FN(VIO_D5),
+	GPIO_FN(VIO_D6), GPIO_FN(VIO_D7), GPIO_FN(VIO_D8),
+	GPIO_FN(VIO_D9), GPIO_FN(VIO_D10), GPIO_FN(VIO_D11),
+	GPIO_FN(VIO_D12), GPIO_FN(VIO_D13), GPIO_FN(VIO_D14),
+	GPIO_FN(VIO_D15), GPIO_FN(VIO_CLK), GPIO_FN(VIO_FIELD),
+	GPIO_FN(VIO_CKO),
+	GPIO_FN(MFG3_IN1), GPIO_FN(MFG3_IN2),
+	GPIO_FN(M9_SLCD_A01), GPIO_FN(MFG3_OUT1), GPIO_FN(TPU0TO0),
+	GPIO_FN(M10_SLCD_CK1), GPIO_FN(MFG4_IN1), GPIO_FN(TPU0TO1),
+	GPIO_FN(M11_SLCD_SO1), GPIO_FN(MFG4_IN2), GPIO_FN(TPU0TO2),
+	GPIO_FN(M12_SLCD_CE1), GPIO_FN(MFG4_OUT1), GPIO_FN(TPU0TO3),
+	GPIO_FN(LCDD0), GPIO_FN(PORT175_KEYOUT0), GPIO_FN(DV_D0),
+	GPIO_FN(SIUCKA), GPIO_FN(MFG0_OUT2),
+	GPIO_FN(LCDD1), GPIO_FN(PORT176_KEYOUT1), GPIO_FN(DV_D1),
+	GPIO_FN(SIUAOLR), GPIO_FN(BBIF2_TSYNC1),
+	GPIO_FN(LCDD2), GPIO_FN(PORT177_KEYOUT2), GPIO_FN(DV_D2),
+	GPIO_FN(SIUAOBT), GPIO_FN(BBIF2_TSCK1),
+	GPIO_FN(LCDD3), GPIO_FN(PORT178_KEYOUT3), GPIO_FN(DV_D3),
+	GPIO_FN(SIUAOSLD), GPIO_FN(BBIF2_TXD1),
+	GPIO_FN(LCDD4), GPIO_FN(PORT179_KEYOUT4), GPIO_FN(DV_D4),
+	GPIO_FN(SIUAISPD), GPIO_FN(MFG1_OUT2),
+	GPIO_FN(LCDD5), GPIO_FN(PORT180_KEYOUT5), GPIO_FN(DV_D5),
+	GPIO_FN(SIUAILR), GPIO_FN(MFG2_OUT2),
+	GPIO_FN(LCDD6), GPIO_FN(DV_D6),
+	GPIO_FN(SIUAIBT), GPIO_FN(MFG3_OUT2), GPIO_FN(XWR2),
+	GPIO_FN(LCDD7), GPIO_FN(DV_D7),
+	GPIO_FN(SIUAISLD), GPIO_FN(MFG4_OUT2), GPIO_FN(XWR3),
+	GPIO_FN(LCDD8), GPIO_FN(DV_D8), GPIO_FN(D16), GPIO_FN(ED16),
+	GPIO_FN(LCDD9), GPIO_FN(DV_D9), GPIO_FN(D17), GPIO_FN(ED17),
+	GPIO_FN(LCDD10), GPIO_FN(DV_D10), GPIO_FN(D18), GPIO_FN(ED18),
+	GPIO_FN(LCDD11), GPIO_FN(DV_D11), GPIO_FN(D19), GPIO_FN(ED19),
+	GPIO_FN(LCDD12), GPIO_FN(DV_D12), GPIO_FN(D20), GPIO_FN(ED20),
+	GPIO_FN(LCDD13), GPIO_FN(DV_D13), GPIO_FN(D21), GPIO_FN(ED21),
+	GPIO_FN(LCDD14), GPIO_FN(DV_D14), GPIO_FN(D22), GPIO_FN(ED22),
+	GPIO_FN(LCDD15), GPIO_FN(DV_D15), GPIO_FN(D23), GPIO_FN(ED23),
+	GPIO_FN(LCDD16), GPIO_FN(DV_HSYNC), GPIO_FN(D24), GPIO_FN(ED24),
+	GPIO_FN(LCDD17), GPIO_FN(DV_VSYNC), GPIO_FN(D25), GPIO_FN(ED25),
+	GPIO_FN(LCDD18), GPIO_FN(DREQ2), GPIO_FN(MSIOF0L_TSCK),
+	GPIO_FN(D26), GPIO_FN(ED26),
+	GPIO_FN(LCDD19), GPIO_FN(MSIOF0L_TSYNC),
+	GPIO_FN(D27), GPIO_FN(ED27),
+	GPIO_FN(LCDD20), GPIO_FN(TS_SPSYNC1), GPIO_FN(MSIOF0L_MCK0),
+	GPIO_FN(D28), GPIO_FN(ED28),
+	GPIO_FN(LCDD21), GPIO_FN(TS_SDAT1), GPIO_FN(MSIOF0L_MCK1),
+	GPIO_FN(D29), GPIO_FN(ED29),
+	GPIO_FN(LCDD22), GPIO_FN(TS_SDEN1), GPIO_FN(MSIOF0L_SS1),
+	GPIO_FN(D30), GPIO_FN(ED30),
+	GPIO_FN(LCDD23), GPIO_FN(TS_SCK1), GPIO_FN(MSIOF0L_SS2),
+	GPIO_FN(D31), GPIO_FN(ED31),
+	GPIO_FN(LCDDCK), GPIO_FN(LCDWR), GPIO_FN(DV_CKO), GPIO_FN(SIUAOSPD),
+	GPIO_FN(LCDRD), GPIO_FN(DACK2), GPIO_FN(MSIOF0L_RSYNC),
+
+	/* 49-5 (FN) */
+	GPIO_FN(LCDHSYN), GPIO_FN(LCDCS), GPIO_FN(LCDCS2), GPIO_FN(DACK3),
+	GPIO_FN(LCDDISP), GPIO_FN(LCDRS), GPIO_FN(DREQ3), GPIO_FN(MSIOF0L_RSCK),
+	GPIO_FN(LCDCSYN), GPIO_FN(LCDCSYN2), GPIO_FN(DV_CKI),
+	GPIO_FN(LCDLCLK), GPIO_FN(DREQ1), GPIO_FN(MSIOF0L_RXD),
+	GPIO_FN(LCDDON), GPIO_FN(LCDDON2), GPIO_FN(DACK1), GPIO_FN(MSIOF0L_TXD),
+	GPIO_FN(VIO_DR0), GPIO_FN(VIO_DR1), GPIO_FN(VIO_DR2), GPIO_FN(VIO_DR3),
+	GPIO_FN(VIO_DR4), GPIO_FN(VIO_DR5), GPIO_FN(VIO_DR6), GPIO_FN(VIO_DR7),
+	GPIO_FN(VIO_VDR), GPIO_FN(VIO_HDR),
+	GPIO_FN(VIO_CLKR), GPIO_FN(VIO_CKOR),
+	GPIO_FN(SCIFA1_TXD), GPIO_FN(GPS_PGFA0),
+	GPIO_FN(SCIFA1_SCK), GPIO_FN(GPS_PGFA1),
+	GPIO_FN(SCIFA1_RTS), GPIO_FN(GPS_EPPSINMON),
+	GPIO_FN(SCIFA1_RXD), GPIO_FN(SCIFA1_CTS),
+	GPIO_FN(MSIOF1_TXD), GPIO_FN(SCIFA1_TXD2), GPIO_FN(GPS_TXD),
+	GPIO_FN(MSIOF1_TSYNC), GPIO_FN(SCIFA1_CTS2), GPIO_FN(I2C_SDA2),
+	GPIO_FN(MSIOF1_TSCK), GPIO_FN(SCIFA1_SCK2),
+	GPIO_FN(MSIOF1_RXD), GPIO_FN(SCIFA1_RXD2), GPIO_FN(GPS_RXD),
+	GPIO_FN(MSIOF1_RSCK), GPIO_FN(SCIFA1_RTS2),
+	GPIO_FN(MSIOF1_RSYNC), GPIO_FN(I2C_SCL2),
+	GPIO_FN(MSIOF1_MCK0), GPIO_FN(MSIOF1_MCK1),
+	GPIO_FN(MSIOF1_SS1), GPIO_FN(EDBGREQ3),
+	GPIO_FN(MSIOF1_SS2),
+	GPIO_FN(PORT236_IROUT), GPIO_FN(IRDA_OUT),
+	GPIO_FN(IRDA_IN), GPIO_FN(IRDA_FIRSEL),
+	GPIO_FN(TPU1TO0), GPIO_FN(TS_SPSYNC3),
+	GPIO_FN(TPU1TO1), GPIO_FN(TS_SDAT3),
+	GPIO_FN(TPU1TO2), GPIO_FN(TS_SDEN3), GPIO_FN(PORT241_MSIOF2_SS1),
+	GPIO_FN(TPU1TO3), GPIO_FN(PORT242_MSIOF2_TSCK),
+	GPIO_FN(M13_BSW), GPIO_FN(PORT243_MSIOF2_TSYNC),
+	GPIO_FN(M14_GSW), GPIO_FN(PORT244_MSIOF2_TXD),
+	GPIO_FN(PORT245_IROUT), GPIO_FN(M15_RSW),
+	GPIO_FN(SOUT3), GPIO_FN(SCIFA2_TXD1),
+	GPIO_FN(SIN3), GPIO_FN(SCIFA2_RXD1),
+	GPIO_FN(XRTS3), GPIO_FN(SCIFA2_RTS1), GPIO_FN(PORT248_MSIOF2_SS2),
+	GPIO_FN(XCTS3), GPIO_FN(SCIFA2_CTS1), GPIO_FN(PORT249_MSIOF2_RXD),
+	GPIO_FN(DINT), GPIO_FN(SCIFA2_SCK1), GPIO_FN(TS_SCK3),
+	GPIO_FN(SDHICLK0), GPIO_FN(TCK2),
+	GPIO_FN(SDHICD0),
+	GPIO_FN(SDHID0_0), GPIO_FN(TMS2),
+	GPIO_FN(SDHID0_1), GPIO_FN(TDO2),
+	GPIO_FN(SDHID0_2), GPIO_FN(TDI2),
+	GPIO_FN(SDHID0_3), GPIO_FN(RTCK2),
+
+	/* 49-6 (FN) */
+	GPIO_FN(SDHICMD0), GPIO_FN(TRST2),
+	GPIO_FN(SDHIWP0), GPIO_FN(EDBGREQ2),
+	GPIO_FN(SDHICLK1), GPIO_FN(TCK3),
+	GPIO_FN(SDHID1_0), GPIO_FN(M11_SLCD_SO2),
+	GPIO_FN(TS_SPSYNC2), GPIO_FN(TMS3),
+	GPIO_FN(SDHID1_1), GPIO_FN(M9_SLCD_AO2),
+	GPIO_FN(TS_SDAT2), GPIO_FN(TDO3),
+	GPIO_FN(SDHID1_2), GPIO_FN(M10_SLCD_CK2),
+	GPIO_FN(TS_SDEN2), GPIO_FN(TDI3),
+	GPIO_FN(SDHID1_3), GPIO_FN(M12_SLCD_CE2),
+	GPIO_FN(TS_SCK2), GPIO_FN(RTCK3),
+	GPIO_FN(SDHICMD1), GPIO_FN(TRST3),
+	GPIO_FN(SDHICLK2), GPIO_FN(SCIFB_SCK),
+	GPIO_FN(SDHID2_0), GPIO_FN(SCIFB_TXD),
+	GPIO_FN(SDHID2_1), GPIO_FN(SCIFB_CTS),
+	GPIO_FN(SDHID2_2), GPIO_FN(SCIFB_RXD),
+	GPIO_FN(SDHID2_3), GPIO_FN(SCIFB_RTS),
+	GPIO_FN(SDHICMD2),
+	GPIO_FN(RESETOUTS),
+	GPIO_FN(DIVLOCK),
+};
+
+/* helper for top 4 bits in PORTnCR */
+#define PCRH(in, in_pd, in_pu, out)		\
+	0, (out), (in), 0,			\
+	0, 0, 0, 0,				\
+	0, 0, (in_pd), 0,			\
+	0, 0, (in_pu), 0
+
+#define PORTCR(nr, reg)						\
+	{ PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) {		\
+		PCRH(PORT##nr##_IN, PORT##nr##_IN_PD,		\
+		     PORT##nr##_IN_PU, PORT##nr##_OUT),		\
+		PORT##nr##_FN0, PORT##nr##_FN1, PORT##nr##_FN2,	\
+		PORT##nr##_FN3,	PORT##nr##_FN4, PORT##nr##_FN5,	\
+		PORT##nr##_FN6, PORT##nr##_FN7 }		\
+	}
+
+static struct pinmux_cfg_reg pinmux_config_regs[] = {
+	PORTCR(0, 0xe6050000), /* PORT0CR */
+	PORTCR(1, 0xe6050001), /* PORT1CR */
+	PORTCR(2, 0xe6050002), /* PORT2CR */
+	PORTCR(3, 0xe6050003), /* PORT3CR */
+	PORTCR(4, 0xe6050004), /* PORT4CR */
+	PORTCR(5, 0xe6050005), /* PORT5CR */
+	PORTCR(6, 0xe6050006), /* PORT6CR */
+	PORTCR(7, 0xe6050007), /* PORT7CR */
+	PORTCR(8, 0xe6050008), /* PORT8CR */
+	PORTCR(9, 0xe6050009), /* PORT9CR */
+
+	PORTCR(10, 0xe605000a), /* PORT10CR */
+	PORTCR(11, 0xe605000b), /* PORT11CR */
+	PORTCR(12, 0xe605000c), /* PORT12CR */
+	PORTCR(13, 0xe605000d), /* PORT13CR */
+	PORTCR(14, 0xe605000e), /* PORT14CR */
+	PORTCR(15, 0xe605000f), /* PORT15CR */
+	PORTCR(16, 0xe6050010), /* PORT16CR */
+	PORTCR(17, 0xe6050011), /* PORT17CR */
+	PORTCR(18, 0xe6050012), /* PORT18CR */
+	PORTCR(19, 0xe6050013), /* PORT19CR */
+
+	PORTCR(20, 0xe6050014), /* PORT20CR */
+	PORTCR(21, 0xe6050015), /* PORT21CR */
+	PORTCR(22, 0xe6050016), /* PORT22CR */
+	PORTCR(23, 0xe6050017), /* PORT23CR */
+	PORTCR(24, 0xe6050018), /* PORT24CR */
+	PORTCR(25, 0xe6050019), /* PORT25CR */
+	PORTCR(26, 0xe605001a), /* PORT26CR */
+	PORTCR(27, 0xe605001b), /* PORT27CR */
+	PORTCR(28, 0xe605001c), /* PORT28CR */
+	PORTCR(29, 0xe605001d), /* PORT29CR */
+
+	PORTCR(30, 0xe605001e), /* PORT30CR */
+	PORTCR(31, 0xe605001f), /* PORT31CR */
+	PORTCR(32, 0xe6050020), /* PORT32CR */
+	PORTCR(33, 0xe6050021), /* PORT33CR */
+	PORTCR(34, 0xe6050022), /* PORT34CR */
+	PORTCR(35, 0xe6050023), /* PORT35CR */
+	PORTCR(36, 0xe6050024), /* PORT36CR */
+	PORTCR(37, 0xe6050025), /* PORT37CR */
+	PORTCR(38, 0xe6050026), /* PORT38CR */
+	PORTCR(39, 0xe6050027), /* PORT39CR */
+
+	PORTCR(40, 0xe6050028), /* PORT40CR */
+	PORTCR(41, 0xe6050029), /* PORT41CR */
+	PORTCR(42, 0xe605002a), /* PORT42CR */
+	PORTCR(43, 0xe605002b), /* PORT43CR */
+	PORTCR(44, 0xe605002c), /* PORT44CR */
+	PORTCR(45, 0xe605002d), /* PORT45CR */
+	PORTCR(46, 0xe605002e), /* PORT46CR */
+	PORTCR(47, 0xe605002f), /* PORT47CR */
+	PORTCR(48, 0xe6050030), /* PORT48CR */
+	PORTCR(49, 0xe6050031), /* PORT49CR */
+
+	PORTCR(50, 0xe6050032), /* PORT50CR */
+	PORTCR(51, 0xe6050033), /* PORT51CR */
+	PORTCR(52, 0xe6050034), /* PORT52CR */
+	PORTCR(53, 0xe6050035), /* PORT53CR */
+	PORTCR(54, 0xe6050036), /* PORT54CR */
+	PORTCR(55, 0xe6050037), /* PORT55CR */
+	PORTCR(56, 0xe6050038), /* PORT56CR */
+	PORTCR(57, 0xe6050039), /* PORT57CR */
+	PORTCR(58, 0xe605003a), /* PORT58CR */
+	PORTCR(59, 0xe605003b), /* PORT59CR */
+
+	PORTCR(60, 0xe605003c), /* PORT60CR */
+	PORTCR(61, 0xe605003d), /* PORT61CR */
+	PORTCR(62, 0xe605003e), /* PORT62CR */
+	PORTCR(63, 0xe605003f), /* PORT63CR */
+	PORTCR(64, 0xe6050040), /* PORT64CR */
+	PORTCR(65, 0xe6050041), /* PORT65CR */
+	PORTCR(66, 0xe6050042), /* PORT66CR */
+	PORTCR(67, 0xe6050043), /* PORT67CR */
+	PORTCR(68, 0xe6050044), /* PORT68CR */
+	PORTCR(69, 0xe6050045), /* PORT69CR */
+
+	PORTCR(70, 0xe6050046), /* PORT70CR */
+	PORTCR(71, 0xe6050047), /* PORT71CR */
+	PORTCR(72, 0xe6050048), /* PORT72CR */
+	PORTCR(73, 0xe6050049), /* PORT73CR */
+	PORTCR(74, 0xe605004a), /* PORT74CR */
+	PORTCR(75, 0xe605004b), /* PORT75CR */
+	PORTCR(76, 0xe605004c), /* PORT76CR */
+	PORTCR(77, 0xe605004d), /* PORT77CR */
+	PORTCR(78, 0xe605004e), /* PORT78CR */
+	PORTCR(79, 0xe605004f), /* PORT79CR */
+
+	PORTCR(80, 0xe6050050), /* PORT80CR */
+	PORTCR(81, 0xe6050051), /* PORT81CR */
+	PORTCR(82, 0xe6050052), /* PORT82CR */
+	PORTCR(83, 0xe6050053), /* PORT83CR */
+	PORTCR(84, 0xe6050054), /* PORT84CR */
+	PORTCR(85, 0xe6050055), /* PORT85CR */
+	PORTCR(86, 0xe6050056), /* PORT86CR */
+	PORTCR(87, 0xe6050057), /* PORT87CR */
+	PORTCR(88, 0xe6051058), /* PORT88CR */
+	PORTCR(89, 0xe6051059), /* PORT89CR */
+
+	PORTCR(90, 0xe605105a), /* PORT90CR */
+	PORTCR(91, 0xe605105b), /* PORT91CR */
+	PORTCR(92, 0xe605105c), /* PORT92CR */
+	PORTCR(93, 0xe605105d), /* PORT93CR */
+	PORTCR(94, 0xe605105e), /* PORT94CR */
+	PORTCR(95, 0xe605105f), /* PORT95CR */
+	PORTCR(96, 0xe6051060), /* PORT96CR */
+	PORTCR(97, 0xe6051061), /* PORT97CR */
+	PORTCR(98, 0xe6051062), /* PORT98CR */
+	PORTCR(99, 0xe6051063), /* PORT99CR */
+
+	PORTCR(100, 0xe6051064), /* PORT100CR */
+	PORTCR(101, 0xe6051065), /* PORT101CR */
+	PORTCR(102, 0xe6051066), /* PORT102CR */
+	PORTCR(103, 0xe6051067), /* PORT103CR */
+	PORTCR(104, 0xe6051068), /* PORT104CR */
+	PORTCR(105, 0xe6051069), /* PORT105CR */
+	PORTCR(106, 0xe605106a), /* PORT106CR */
+	PORTCR(107, 0xe605106b), /* PORT107CR */
+	PORTCR(108, 0xe605106c), /* PORT108CR */
+	PORTCR(109, 0xe605106d), /* PORT109CR */
+
+	PORTCR(110, 0xe605106e), /* PORT110CR */
+	PORTCR(111, 0xe605106f), /* PORT111CR */
+	PORTCR(112, 0xe6051070), /* PORT112CR */
+	PORTCR(113, 0xe6051071), /* PORT113CR */
+	PORTCR(114, 0xe6051072), /* PORT114CR */
+	PORTCR(115, 0xe6051073), /* PORT115CR */
+	PORTCR(116, 0xe6051074), /* PORT116CR */
+	PORTCR(117, 0xe6051075), /* PORT117CR */
+	PORTCR(118, 0xe6051076), /* PORT118CR */
+	PORTCR(119, 0xe6051077), /* PORT119CR */
+
+	PORTCR(120, 0xe6051078), /* PORT120CR */
+	PORTCR(121, 0xe6051079), /* PORT121CR */
+	PORTCR(122, 0xe605107a), /* PORT122CR */
+	PORTCR(123, 0xe605107b), /* PORT123CR */
+	PORTCR(124, 0xe605107c), /* PORT124CR */
+	PORTCR(125, 0xe605107d), /* PORT125CR */
+	PORTCR(126, 0xe605107e), /* PORT126CR */
+	PORTCR(127, 0xe605107f), /* PORT127CR */
+	PORTCR(128, 0xe6051080), /* PORT128CR */
+	PORTCR(129, 0xe6051081), /* PORT129CR */
+
+	PORTCR(130, 0xe6051082), /* PORT130CR */
+	PORTCR(131, 0xe6051083), /* PORT131CR */
+	PORTCR(132, 0xe6051084), /* PORT132CR */
+	PORTCR(133, 0xe6051085), /* PORT133CR */
+	PORTCR(134, 0xe6051086), /* PORT134CR */
+	PORTCR(135, 0xe6051087), /* PORT135CR */
+	PORTCR(136, 0xe6051088), /* PORT136CR */
+	PORTCR(137, 0xe6051089), /* PORT137CR */
+	PORTCR(138, 0xe605108a), /* PORT138CR */
+	PORTCR(139, 0xe605108b), /* PORT139CR */
+
+	PORTCR(140, 0xe605108c), /* PORT140CR */
+	PORTCR(141, 0xe605108d), /* PORT141CR */
+	PORTCR(142, 0xe605108e), /* PORT142CR */
+	PORTCR(143, 0xe605108f), /* PORT143CR */
+	PORTCR(144, 0xe6051090), /* PORT144CR */
+	PORTCR(145, 0xe6051091), /* PORT145CR */
+	PORTCR(146, 0xe6051092), /* PORT146CR */
+	PORTCR(147, 0xe6051093), /* PORT147CR */
+	PORTCR(148, 0xe6051094), /* PORT148CR */
+	PORTCR(149, 0xe6051095), /* PORT149CR */
+
+	PORTCR(150, 0xe6051096), /* PORT150CR */
+	PORTCR(151, 0xe6051097), /* PORT151CR */
+	PORTCR(152, 0xe6051098), /* PORT152CR */
+	PORTCR(153, 0xe6051099), /* PORT153CR */
+	PORTCR(154, 0xe605109a), /* PORT154CR */
+	PORTCR(155, 0xe605109b), /* PORT155CR */
+	PORTCR(156, 0xe605109c), /* PORT156CR */
+	PORTCR(157, 0xe605109d), /* PORT157CR */
+	PORTCR(158, 0xe605109e), /* PORT158CR */
+	PORTCR(159, 0xe605109f), /* PORT159CR */
+
+	PORTCR(160, 0xe60510a0), /* PORT160CR */
+	PORTCR(161, 0xe60510a1), /* PORT161CR */
+	PORTCR(162, 0xe60510a2), /* PORT162CR */
+	PORTCR(163, 0xe60510a3), /* PORT163CR */
+	PORTCR(164, 0xe60510a4), /* PORT164CR */
+	PORTCR(165, 0xe60510a5), /* PORT165CR */
+	PORTCR(166, 0xe60510a6), /* PORT166CR */
+	PORTCR(167, 0xe60510a7), /* PORT167CR */
+	PORTCR(168, 0xe60510a8), /* PORT168CR */
+	PORTCR(169, 0xe60510a9), /* PORT169CR */
+
+	PORTCR(170, 0xe60510aa), /* PORT170CR */
+	PORTCR(171, 0xe60510ab), /* PORT171CR */
+	PORTCR(172, 0xe60510ac), /* PORT172CR */
+	PORTCR(173, 0xe60510ad), /* PORT173CR */
+	PORTCR(174, 0xe60510ae), /* PORT174CR */
+	PORTCR(175, 0xe60520af), /* PORT175CR */
+	PORTCR(176, 0xe60520b0), /* PORT176CR */
+	PORTCR(177, 0xe60520b1), /* PORT177CR */
+	PORTCR(178, 0xe60520b2), /* PORT178CR */
+	PORTCR(179, 0xe60520b3), /* PORT179CR */
+
+	PORTCR(180, 0xe60520b4), /* PORT180CR */
+	PORTCR(181, 0xe60520b5), /* PORT181CR */
+	PORTCR(182, 0xe60520b6), /* PORT182CR */
+	PORTCR(183, 0xe60520b7), /* PORT183CR */
+	PORTCR(184, 0xe60520b8), /* PORT184CR */
+	PORTCR(185, 0xe60520b9), /* PORT185CR */
+	PORTCR(186, 0xe60520ba), /* PORT186CR */
+	PORTCR(187, 0xe60520bb), /* PORT187CR */
+	PORTCR(188, 0xe60520bc), /* PORT188CR */
+	PORTCR(189, 0xe60520bd), /* PORT189CR */
+
+	PORTCR(190, 0xe60520be), /* PORT190CR */
+	PORTCR(191, 0xe60520bf), /* PORT191CR */
+	PORTCR(192, 0xe60520c0), /* PORT192CR */
+	PORTCR(193, 0xe60520c1), /* PORT193CR */
+	PORTCR(194, 0xe60520c2), /* PORT194CR */
+	PORTCR(195, 0xe60520c3), /* PORT195CR */
+	PORTCR(196, 0xe60520c4), /* PORT196CR */
+	PORTCR(197, 0xe60520c5), /* PORT197CR */
+	PORTCR(198, 0xe60520c6), /* PORT198CR */
+	PORTCR(199, 0xe60520c7), /* PORT199CR */
+
+	PORTCR(200, 0xe60520c8), /* PORT200CR */
+	PORTCR(201, 0xe60520c9), /* PORT201CR */
+	PORTCR(202, 0xe60520ca), /* PORT202CR */
+	PORTCR(203, 0xe60520cb), /* PORT203CR */
+	PORTCR(204, 0xe60520cc), /* PORT204CR */
+	PORTCR(205, 0xe60520cd), /* PORT205CR */
+	PORTCR(206, 0xe60520ce), /* PORT206CR */
+	PORTCR(207, 0xe60520cf), /* PORT207CR */
+	PORTCR(208, 0xe60520d0), /* PORT208CR */
+	PORTCR(209, 0xe60520d1), /* PORT209CR */
+
+	PORTCR(210, 0xe60520d2), /* PORT210CR */
+	PORTCR(211, 0xe60520d3), /* PORT211CR */
+	PORTCR(212, 0xe60520d4), /* PORT212CR */
+	PORTCR(213, 0xe60520d5), /* PORT213CR */
+	PORTCR(214, 0xe60520d6), /* PORT214CR */
+	PORTCR(215, 0xe60520d7), /* PORT215CR */
+	PORTCR(216, 0xe60520d8), /* PORT216CR */
+	PORTCR(217, 0xe60520d9), /* PORT217CR */
+	PORTCR(218, 0xe60520da), /* PORT218CR */
+	PORTCR(219, 0xe60520db), /* PORT219CR */
+
+	PORTCR(220, 0xe60520dc), /* PORT220CR */
+	PORTCR(221, 0xe60520dd), /* PORT221CR */
+	PORTCR(222, 0xe60520de), /* PORT222CR */
+	PORTCR(223, 0xe60520df), /* PORT223CR */
+	PORTCR(224, 0xe60520e0), /* PORT224CR */
+	PORTCR(225, 0xe60520e1), /* PORT225CR */
+	PORTCR(226, 0xe60520e2), /* PORT226CR */
+	PORTCR(227, 0xe60520e3), /* PORT227CR */
+	PORTCR(228, 0xe60520e4), /* PORT228CR */
+	PORTCR(229, 0xe60520e5), /* PORT229CR */
+
+	PORTCR(230, 0xe60520e6), /* PORT230CR */
+	PORTCR(231, 0xe60520e7), /* PORT231CR */
+	PORTCR(232, 0xe60520e8), /* PORT232CR */
+	PORTCR(233, 0xe60520e9), /* PORT233CR */
+	PORTCR(234, 0xe60520ea), /* PORT234CR */
+	PORTCR(235, 0xe60520eb), /* PORT235CR */
+	PORTCR(236, 0xe60530ec), /* PORT236CR */
+	PORTCR(237, 0xe60530ed), /* PORT237CR */
+	PORTCR(238, 0xe60530ee), /* PORT238CR */
+	PORTCR(239, 0xe60530ef), /* PORT239CR */
+
+	PORTCR(240, 0xe60530f0), /* PORT240CR */
+	PORTCR(241, 0xe60530f1), /* PORT241CR */
+	PORTCR(242, 0xe60530f2), /* PORT242CR */
+	PORTCR(243, 0xe60530f3), /* PORT243CR */
+	PORTCR(244, 0xe60530f4), /* PORT244CR */
+	PORTCR(245, 0xe60530f5), /* PORT245CR */
+	PORTCR(246, 0xe60530f6), /* PORT246CR */
+	PORTCR(247, 0xe60530f7), /* PORT247CR */
+	PORTCR(248, 0xe60530f8), /* PORT248CR */
+	PORTCR(249, 0xe60530f9), /* PORT249CR */
+
+	PORTCR(250, 0xe60530fa), /* PORT250CR */
+	PORTCR(251, 0xe60530fb), /* PORT251CR */
+	PORTCR(252, 0xe60530fc), /* PORT252CR */
+	PORTCR(253, 0xe60530fd), /* PORT253CR */
+	PORTCR(254, 0xe60530fe), /* PORT254CR */
+	PORTCR(255, 0xe60530ff), /* PORT255CR */
+	PORTCR(256, 0xe6053100), /* PORT256CR */
+	PORTCR(257, 0xe6053101), /* PORT257CR */
+	PORTCR(258, 0xe6053102), /* PORT258CR */
+	PORTCR(259, 0xe6053103), /* PORT259CR */
+
+	PORTCR(260, 0xe6053104), /* PORT260CR */
+	PORTCR(261, 0xe6053105), /* PORT261CR */
+	PORTCR(262, 0xe6053106), /* PORT262CR */
+	PORTCR(263, 0xe6053107), /* PORT263CR */
+	PORTCR(264, 0xe6053108), /* PORT264CR */
+	PORTCR(265, 0xe6053109), /* PORT265CR */
+	PORTCR(266, 0xe605310a), /* PORT266CR */
+	PORTCR(267, 0xe605310b), /* PORT267CR */
+	PORTCR(268, 0xe605310c), /* PORT268CR */
+	PORTCR(269, 0xe605310d), /* PORT269CR */
+
+	PORTCR(270, 0xe605310e), /* PORT270CR */
+	PORTCR(271, 0xe605310f), /* PORT271CR */
+	PORTCR(272, 0xe6053110), /* PORT272CR */
+
+	{ PINMUX_CFG_REG("MSELBCR", 0xe6058024, 32, 1) {
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		MSELBCR_MSEL2_0, MSELBCR_MSEL2_1,
+		0, 0,
+		0, 0 }
+	},
+	{ },
+};
+
+static struct pinmux_data_reg pinmux_data_regs[] = {
+	{ PINMUX_DATA_REG("PORTL031_000DR", 0xe6054000, 32) {
+		PORT31_DATA, PORT30_DATA, PORT29_DATA, PORT28_DATA,
+		PORT27_DATA, PORT26_DATA, PORT25_DATA, PORT24_DATA,
+		PORT23_DATA, PORT22_DATA, PORT21_DATA, PORT20_DATA,
+		PORT19_DATA, PORT18_DATA, PORT17_DATA, PORT16_DATA,
+		PORT15_DATA, PORT14_DATA, PORT13_DATA, PORT12_DATA,
+		PORT11_DATA, PORT10_DATA, PORT9_DATA, PORT8_DATA,
+		PORT7_DATA, PORT6_DATA, PORT5_DATA, PORT4_DATA,
+		PORT3_DATA, PORT2_DATA, PORT1_DATA, PORT0_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTL063_032DR", 0xe6054004, 32) {
+		PORT63_DATA, PORT62_DATA, PORT61_DATA, PORT60_DATA,
+		PORT59_DATA, PORT58_DATA, PORT57_DATA, PORT56_DATA,
+		PORT55_DATA, PORT54_DATA, PORT53_DATA, PORT52_DATA,
+		PORT51_DATA, PORT50_DATA, PORT49_DATA, PORT48_DATA,
+		PORT47_DATA, PORT46_DATA, PORT45_DATA, PORT44_DATA,
+		PORT43_DATA, PORT42_DATA, PORT41_DATA, PORT40_DATA,
+		PORT39_DATA, PORT38_DATA, PORT37_DATA, PORT36_DATA,
+		PORT35_DATA, PORT34_DATA, PORT33_DATA, PORT32_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTL095_064DR", 0xe6054008, 32) {
+		PORT95_DATA, PORT94_DATA, PORT93_DATA, PORT92_DATA,
+		PORT91_DATA, PORT90_DATA, PORT89_DATA, PORT88_DATA,
+		PORT87_DATA, PORT86_DATA, PORT85_DATA, PORT84_DATA,
+		PORT83_DATA, PORT82_DATA, PORT81_DATA, PORT80_DATA,
+		PORT79_DATA, PORT78_DATA, PORT77_DATA, PORT76_DATA,
+		PORT75_DATA, PORT74_DATA, PORT73_DATA, PORT72_DATA,
+		PORT71_DATA, PORT70_DATA, PORT69_DATA, PORT68_DATA,
+		PORT67_DATA, PORT66_DATA, PORT65_DATA, PORT64_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTD127_096DR", 0xe6055004, 32) {
+		PORT127_DATA, PORT126_DATA, PORT125_DATA, PORT124_DATA,
+		PORT123_DATA, PORT122_DATA, PORT121_DATA, PORT120_DATA,
+		PORT119_DATA, PORT118_DATA, PORT117_DATA, PORT116_DATA,
+		PORT115_DATA, PORT114_DATA, PORT113_DATA, PORT112_DATA,
+		PORT111_DATA, PORT110_DATA, PORT109_DATA, PORT108_DATA,
+		PORT107_DATA, PORT106_DATA, PORT105_DATA, PORT104_DATA,
+		PORT103_DATA, PORT102_DATA, PORT101_DATA, PORT100_DATA,
+		PORT99_DATA, PORT98_DATA, PORT97_DATA, PORT96_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTD159_128DR", 0xe6055008, 32) {
+		PORT159_DATA, PORT158_DATA, PORT157_DATA, PORT156_DATA,
+		PORT155_DATA, PORT154_DATA, PORT153_DATA, PORT152_DATA,
+		PORT151_DATA, PORT150_DATA, PORT149_DATA, PORT148_DATA,
+		PORT147_DATA, PORT146_DATA, PORT145_DATA, PORT144_DATA,
+		PORT143_DATA, PORT142_DATA, PORT141_DATA, PORT140_DATA,
+		PORT139_DATA, PORT138_DATA, PORT137_DATA, PORT136_DATA,
+		PORT135_DATA, PORT134_DATA, PORT133_DATA, PORT132_DATA,
+		PORT131_DATA, PORT130_DATA, PORT129_DATA, PORT128_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTR191_160DR", 0xe6056000, 32) {
+		PORT191_DATA, PORT190_DATA, PORT189_DATA, PORT188_DATA,
+		PORT187_DATA, PORT186_DATA, PORT185_DATA, PORT184_DATA,
+		PORT183_DATA, PORT182_DATA, PORT181_DATA, PORT180_DATA,
+		PORT179_DATA, PORT178_DATA, PORT177_DATA, PORT176_DATA,
+		PORT175_DATA, PORT174_DATA, PORT173_DATA, PORT172_DATA,
+		PORT171_DATA, PORT170_DATA, PORT169_DATA, PORT168_DATA,
+		PORT167_DATA, PORT166_DATA, PORT165_DATA, PORT164_DATA,
+		PORT163_DATA, PORT162_DATA, PORT161_DATA, PORT160_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTR223_192DR", 0xe6056004, 32) {
+		PORT223_DATA, PORT222_DATA, PORT221_DATA, PORT220_DATA,
+		PORT219_DATA, PORT218_DATA, PORT217_DATA, PORT216_DATA,
+		PORT215_DATA, PORT214_DATA, PORT213_DATA, PORT212_DATA,
+		PORT211_DATA, PORT210_DATA, PORT209_DATA, PORT208_DATA,
+		PORT207_DATA, PORT206_DATA, PORT205_DATA, PORT204_DATA,
+		PORT203_DATA, PORT202_DATA, PORT201_DATA, PORT200_DATA,
+		PORT199_DATA, PORT198_DATA, PORT197_DATA, PORT196_DATA,
+		PORT195_DATA, PORT194_DATA, PORT193_DATA, PORT192_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTU255_224DR", 0xe6057000, 32) {
+		PORT255_DATA, PORT254_DATA, PORT253_DATA, PORT252_DATA,
+		PORT251_DATA, PORT250_DATA, PORT249_DATA, PORT248_DATA,
+		PORT247_DATA, PORT246_DATA, PORT245_DATA, PORT244_DATA,
+		PORT243_DATA, PORT242_DATA, PORT241_DATA, PORT240_DATA,
+		PORT239_DATA, PORT238_DATA, PORT237_DATA, PORT236_DATA,
+		PORT235_DATA, PORT234_DATA, PORT233_DATA, PORT232_DATA,
+		PORT231_DATA, PORT230_DATA, PORT229_DATA, PORT228_DATA,
+		PORT227_DATA, PORT226_DATA, PORT225_DATA, PORT224_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTU287_256DR", 0xe6057004, 32) {
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, PORT272_DATA,
+		PORT271_DATA, PORT270_DATA, PORT269_DATA, PORT268_DATA,
+		PORT267_DATA, PORT266_DATA, PORT265_DATA, PORT264_DATA,
+		PORT263_DATA, PORT262_DATA, PORT261_DATA, PORT260_DATA,
+		PORT259_DATA, PORT258_DATA, PORT257_DATA, PORT256_DATA }
+	},
+	{ },
+};
+
+static struct pinmux_info sh7367_pinmux_info = {
+	.name = "sh7367_pfc",
+	.reserved_id = PINMUX_RESERVED,
+	.data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END },
+	.input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
+	.input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END },
+	.input_pd = { PINMUX_INPUT_PULLDOWN_BEGIN, PINMUX_INPUT_PULLDOWN_END },
+	.output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
+	.mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END },
+	.function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
+
+	.first_gpio = GPIO_PORT0,
+	.last_gpio = GPIO_FN_DIVLOCK,
+
+	.gpios = pinmux_gpios,
+	.cfg_regs = pinmux_config_regs,
+	.data_regs = pinmux_data_regs,
+
+	.gpio_data = pinmux_data,
+	.gpio_data_size = ARRAY_SIZE(pinmux_data),
+};
+
+void sh7367_pinmux_init(void)
+{
+	register_pinmux(&sh7367_pinmux_info);
+}
diff --git a/arch/arm/mach-shmobile/pfc-sh7372.c b/arch/arm/mach-shmobile/pfc-sh7372.c
new file mode 100644
index 000000000000..9557d0964d73
--- /dev/null
+++ b/arch/arm/mach-shmobile/pfc-sh7372.c
@@ -0,0 +1,1637 @@
+/*
+ * sh7372 processor support - PFC hardware block
+ *
+ * Copyright (C) 2010  Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * Based on
+ * sh7367 processor support - PFC hardware block
+ * Copyright (C) 2010  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <mach/sh7372.h>
+
+#define _1(fn, pfx, sfx) fn(pfx, sfx)
+
+#define _10(fn, pfx, sfx)				\
+	_1(fn, pfx##0, sfx), _1(fn, pfx##1, sfx),	\
+	_1(fn, pfx##2, sfx), _1(fn, pfx##3, sfx),	\
+	_1(fn, pfx##4, sfx), _1(fn, pfx##5, sfx),	\
+	_1(fn, pfx##6, sfx), _1(fn, pfx##7, sfx),	\
+	_1(fn, pfx##8, sfx), _1(fn, pfx##9, sfx)
+
+#define _80(fn, pfx, sfx)				\
+	_10(fn, pfx##1, sfx),	_10(fn, pfx##2, sfx),	\
+	_10(fn, pfx##3, sfx),	_10(fn, pfx##4, sfx),	\
+	_10(fn, pfx##5, sfx),	_10(fn, pfx##6, sfx),	\
+	_10(fn, pfx##7, sfx),	_10(fn, pfx##8, sfx)
+
+#define _190(fn, pfx, sfx) \
+	_10(fn, pfx, sfx), _80(fn, pfx, sfx), _10(fn, pfx##9, sfx), \
+	_10(fn, pfx##10, sfx), _80(fn, pfx##1, sfx), _1(fn, pfx##190, sfx)
+
+#define _PORT(pfx, sfx) pfx##_##sfx
+#define PORT_ALL(str) _190(_PORT, PORT, str)
+
+enum {
+	PINMUX_RESERVED = 0,
+
+	/* PORT0_DATA -> PORT190_DATA */
+	PINMUX_DATA_BEGIN,
+	PORT_ALL(DATA),
+	PINMUX_DATA_END,
+
+	/* PORT0_IN -> PORT190_IN */
+	PINMUX_INPUT_BEGIN,
+	PORT_ALL(IN),
+	PINMUX_INPUT_END,
+
+	/* PORT0_IN_PU -> PORT190_IN_PU */
+	PINMUX_INPUT_PULLUP_BEGIN,
+	PORT_ALL(IN_PU),
+	PINMUX_INPUT_PULLUP_END,
+
+	/* PORT0_IN_PD -> PORT190_IN_PD */
+	PINMUX_INPUT_PULLDOWN_BEGIN,
+	PORT_ALL(IN_PD),
+	PINMUX_INPUT_PULLDOWN_END,
+
+	/* PORT0_OUT -> PORT190_OUT */
+	PINMUX_OUTPUT_BEGIN,
+	PORT_ALL(OUT),
+	PINMUX_OUTPUT_END,
+
+	PINMUX_FUNCTION_BEGIN,
+	PORT_ALL(FN_IN),	/* PORT0_FN_IN	-> PORT190_FN_IN */
+	PORT_ALL(FN_OUT),	/* PORT0_FN_OUT	-> PORT190_FN_OUT */
+	PORT_ALL(FN0),		/* PORT0_FN0	-> PORT190_FN0 */
+	PORT_ALL(FN1),		/* PORT0_FN1	-> PORT190_FN1 */
+	PORT_ALL(FN2),		/* PORT0_FN2	-> PORT190_FN2 */
+	PORT_ALL(FN3),		/* PORT0_FN3	-> PORT190_FN3 */
+	PORT_ALL(FN4),		/* PORT0_FN4	-> PORT190_FN4 */
+	PORT_ALL(FN5),		/* PORT0_FN5	-> PORT190_FN5 */
+	PORT_ALL(FN6),		/* PORT0_FN6	-> PORT190_FN6 */
+	PORT_ALL(FN7),		/* PORT0_FN7	-> PORT190_FN7 */
+
+	MSEL1CR_31_0,	MSEL1CR_31_1,
+	MSEL1CR_30_0,	MSEL1CR_30_1,
+	MSEL1CR_29_0,	MSEL1CR_29_1,
+	MSEL1CR_28_0,	MSEL1CR_28_1,
+	MSEL1CR_27_0,	MSEL1CR_27_1,
+	MSEL1CR_26_0,	MSEL1CR_26_1,
+	MSEL1CR_16_0,	MSEL1CR_16_1,
+	MSEL1CR_15_0,	MSEL1CR_15_1,
+	MSEL1CR_14_0,	MSEL1CR_14_1,
+	MSEL1CR_13_0,	MSEL1CR_13_1,
+	MSEL1CR_12_0,	MSEL1CR_12_1,
+	MSEL1CR_9_0,	MSEL1CR_9_1,
+	MSEL1CR_8_0,	MSEL1CR_8_1,
+	MSEL1CR_7_0,	MSEL1CR_7_1,
+	MSEL1CR_6_0,	MSEL1CR_6_1,
+	MSEL1CR_4_0,	MSEL1CR_4_1,
+	MSEL1CR_3_0,	MSEL1CR_3_1,
+	MSEL1CR_2_0,	MSEL1CR_2_1,
+	MSEL1CR_0_0,	MSEL1CR_0_1,
+
+	MSEL3CR_27_0,	MSEL3CR_27_1,
+	MSEL3CR_26_0,	MSEL3CR_26_1,
+	MSEL3CR_21_0,	MSEL3CR_21_1,
+	MSEL3CR_20_0,	MSEL3CR_20_1,
+	MSEL3CR_15_0,	MSEL3CR_15_1,
+	MSEL3CR_9_0,	MSEL3CR_9_1,
+	MSEL3CR_6_0,	MSEL3CR_6_1,
+
+	MSEL4CR_19_0,	MSEL4CR_19_1,
+	MSEL4CR_18_0,	MSEL4CR_18_1,
+	MSEL4CR_17_0,	MSEL4CR_17_1,
+	MSEL4CR_16_0,	MSEL4CR_16_1,
+	MSEL4CR_15_0,	MSEL4CR_15_1,
+	MSEL4CR_14_0,	MSEL4CR_14_1,
+	MSEL4CR_10_0,	MSEL4CR_10_1,
+	MSEL4CR_6_0,	MSEL4CR_6_1,
+	MSEL4CR_4_0,	MSEL4CR_4_1,
+	MSEL4CR_1_0,	MSEL4CR_1_1,
+	PINMUX_FUNCTION_END,
+
+	PINMUX_MARK_BEGIN,
+
+	/* IRQ */
+	IRQ0_6_MARK,	IRQ0_162_MARK,	IRQ1_MARK,	IRQ2_4_MARK,
+	IRQ2_5_MARK,	IRQ3_8_MARK,	IRQ3_16_MARK,	IRQ4_17_MARK,
+	IRQ4_163_MARK,	IRQ5_MARK,	IRQ6_39_MARK,	IRQ6_164_MARK,
+	IRQ7_40_MARK,	IRQ7_167_MARK,	IRQ8_41_MARK,	IRQ8_168_MARK,
+	IRQ9_42_MARK,	IRQ9_169_MARK,	IRQ10_MARK,	IRQ11_MARK,
+	IRQ12_80_MARK,	IRQ12_137_MARK,	IRQ13_81_MARK,	IRQ13_145_MARK,
+	IRQ14_82_MARK,	IRQ14_146_MARK,	IRQ15_83_MARK,	IRQ15_147_MARK,
+	IRQ16_84_MARK,	IRQ16_170_MARK,	IRQ17_MARK,	IRQ18_MARK,
+	IRQ19_MARK,	IRQ20_MARK,	IRQ21_MARK,	IRQ22_MARK,
+	IRQ23_MARK,	IRQ24_MARK,	IRQ25_MARK,	IRQ26_121_MARK,
+	IRQ26_172_MARK,	IRQ27_122_MARK,	IRQ27_180_MARK,	IRQ28_123_MARK,
+	IRQ28_181_MARK,	IRQ29_129_MARK,	IRQ29_182_MARK,	IRQ30_130_MARK,
+	IRQ30_183_MARK,	IRQ31_138_MARK,	IRQ31_184_MARK,
+
+	/* MSIOF0 */
+	MSIOF0_TSYNC_MARK,	MSIOF0_TSCK_MARK,	MSIOF0_RXD_MARK,
+	MSIOF0_RSCK_MARK,	MSIOF0_RSYNC_MARK,	MSIOF0_MCK0_MARK,
+	MSIOF0_MCK1_MARK,	MSIOF0_SS1_MARK,	MSIOF0_SS2_MARK,
+	MSIOF0_TXD_MARK,
+
+	/* MSIOF1 */
+	MSIOF1_TSCK_39_MARK,	MSIOF1_TSYNC_40_MARK,
+	MSIOF1_TSCK_88_MARK,	MSIOF1_TSYNC_89_MARK,
+	MSIOF1_TXD_41_MARK,	MSIOF1_RXD_42_MARK,
+	MSIOF1_TXD_90_MARK,	MSIOF1_RXD_91_MARK,
+	MSIOF1_SS1_43_MARK,	MSIOF1_SS2_44_MARK,
+	MSIOF1_SS1_92_MARK,	MSIOF1_SS2_93_MARK,
+	MSIOF1_RSCK_MARK,	MSIOF1_RSYNC_MARK,
+	MSIOF1_MCK0_MARK,	MSIOF1_MCK1_MARK,
+
+	/* MSIOF2 */
+	MSIOF2_RSCK_MARK,	MSIOF2_RSYNC_MARK,	MSIOF2_MCK0_MARK,
+	MSIOF2_MCK1_MARK,	MSIOF2_SS1_MARK,	MSIOF2_SS2_MARK,
+	MSIOF2_TSYNC_MARK,	MSIOF2_TSCK_MARK,	MSIOF2_RXD_MARK,
+	MSIOF2_TXD_MARK,
+
+	/* MSIOF3 */
+	BBIF1_RXD_MARK,		BBIF1_TSYNC_MARK,	BBIF1_TSCK_MARK,
+	BBIF1_TXD_MARK,		BBIF1_RSCK_MARK,	BBIF1_RSYNC_MARK,
+	BBIF1_FLOW_MARK,	BB_RX_FLOW_N_MARK,
+
+	/* MSIOF4 */
+	BBIF2_TSCK1_MARK,	BBIF2_TSYNC1_MARK,
+	BBIF2_TXD1_MARK,	BBIF2_RXD_MARK,
+
+	/* FSI */
+	FSIACK_MARK,	FSIBCK_MARK,		FSIAILR_MARK,	FSIAIBT_MARK,
+	FSIAISLD_MARK,	FSIAOMC_MARK,		FSIAOLR_MARK,	FSIAOBT_MARK,
+	FSIAOSLD_MARK,	FSIASPDIF_11_MARK,	FSIASPDIF_15_MARK,
+
+	/* FMSI */
+	FMSOCK_MARK,	FMSOOLR_MARK,	FMSIOLR_MARK,	FMSOOBT_MARK,
+	FMSIOBT_MARK,	FMSOSLD_MARK,	FMSOILR_MARK,	FMSIILR_MARK,
+	FMSOIBT_MARK,	FMSIIBT_MARK,	FMSISLD_MARK,	FMSICK_MARK,
+
+	/* SCIFA0 */
+	SCIFA0_TXD_MARK,	SCIFA0_RXD_MARK,	SCIFA0_SCK_MARK,
+	SCIFA0_RTS_MARK,	SCIFA0_CTS_MARK,
+
+	/* SCIFA1 */
+	SCIFA1_TXD_MARK,	SCIFA1_RXD_MARK,	SCIFA1_SCK_MARK,
+	SCIFA1_RTS_MARK,	SCIFA1_CTS_MARK,
+
+	/* SCIFA2 */
+	SCIFA2_CTS1_MARK,	SCIFA2_RTS1_MARK,	SCIFA2_TXD1_MARK,
+	SCIFA2_RXD1_MARK,	SCIFA2_SCK1_MARK,
+
+	/* SCIFA3 */
+	SCIFA3_CTS_43_MARK,	SCIFA3_CTS_140_MARK,	SCIFA3_RTS_44_MARK,
+	SCIFA3_RTS_141_MARK,	SCIFA3_SCK_MARK,	SCIFA3_TXD_MARK,
+	SCIFA3_RXD_MARK,
+
+	/* SCIFA4 */
+	SCIFA4_RXD_MARK,	SCIFA4_TXD_MARK,
+
+	/* SCIFA5 */
+	SCIFA5_RXD_MARK,	SCIFA5_TXD_MARK,
+
+	/* SCIFB */
+	SCIFB_SCK_MARK,	SCIFB_RTS_MARK,	SCIFB_CTS_MARK,
+	SCIFB_TXD_MARK,	SCIFB_RXD_MARK,
+
+	/* CEU */
+	VIO_HD_MARK,	VIO_CKO1_MARK,	VIO_CKO2_MARK,	VIO_VD_MARK,
+	VIO_CLK_MARK,	VIO_FIELD_MARK,	VIO_CKO_MARK,
+	VIO_D0_MARK,	VIO_D1_MARK,	VIO_D2_MARK,	VIO_D3_MARK,
+	VIO_D4_MARK,	VIO_D5_MARK,	VIO_D6_MARK,	VIO_D7_MARK,
+	VIO_D8_MARK,	VIO_D9_MARK,	VIO_D10_MARK,	VIO_D11_MARK,
+	VIO_D12_MARK,	VIO_D13_MARK,	VIO_D14_MARK,	VIO_D15_MARK,
+
+	/* USB0 */
+	IDIN_0_MARK,	EXTLP_0_MARK,	OVCN2_0_MARK,	PWEN_0_MARK,
+	OVCN_0_MARK,	VBUS0_0_MARK,
+
+	/* USB1 */
+	IDIN_1_18_MARK,		IDIN_1_113_MARK,
+	PWEN_1_115_MARK,	PWEN_1_138_MARK,
+	OVCN_1_114_MARK,	OVCN_1_162_MARK,
+	EXTLP_1_MARK,		OVCN2_1_MARK,
+	VBUS0_1_MARK,
+
+	/* GPIO */
+	GPI0_MARK,	GPI1_MARK,	GPO0_MARK,	GPO1_MARK,
+
+	/* BSC */
+	BS_MARK,	WE1_MARK,
+	CKO_MARK,	WAIT_MARK,	RDWR_MARK,
+
+	A0_MARK,	A1_MARK,	A2_MARK,	A3_MARK,
+	A6_MARK,	A7_MARK,	A8_MARK,	A9_MARK,
+	A10_MARK,	A11_MARK,	A12_MARK,	A13_MARK,
+	A14_MARK,	A15_MARK,	A16_MARK,	A17_MARK,
+	A18_MARK,	A19_MARK,	A20_MARK,	A21_MARK,
+	A22_MARK,	A23_MARK,	A24_MARK,	A25_MARK,
+	A26_MARK,
+
+	CS0_MARK,	CS2_MARK,	CS4_MARK,
+	CS5A_MARK,	CS5B_MARK,	CS6A_MARK,
+
+	/* BSC/FLCTL */
+	RD_FSC_MARK,	WE0_FWE_MARK,	A4_FOE_MARK,	A5_FCDE_MARK,
+	D0_NAF0_MARK,	D1_NAF1_MARK,	D2_NAF2_MARK,	D3_NAF3_MARK,
+	D4_NAF4_MARK,	D5_NAF5_MARK,	D6_NAF6_MARK,	D7_NAF7_MARK,
+	D8_NAF8_MARK,	D9_NAF9_MARK,	D10_NAF10_MARK,	D11_NAF11_MARK,
+	D12_NAF12_MARK,	D13_NAF13_MARK,	D14_NAF14_MARK,	D15_NAF15_MARK,
+
+	/* MMCIF(1) */
+	MMCD0_0_MARK,	MMCD0_1_MARK,	MMCD0_2_MARK,	MMCD0_3_MARK,
+	MMCD0_4_MARK,	MMCD0_5_MARK,	MMCD0_6_MARK,	MMCD0_7_MARK,
+	MMCCMD0_MARK,	MMCCLK0_MARK,
+
+	/* MMCIF(2) */
+	MMCD1_0_MARK,	MMCD1_1_MARK,	MMCD1_2_MARK,	MMCD1_3_MARK,
+	MMCD1_4_MARK,	MMCD1_5_MARK,	MMCD1_6_MARK,	MMCD1_7_MARK,
+	MMCCLK1_MARK,	MMCCMD1_MARK,
+
+	/* SPU2 */
+	VINT_I_MARK,
+
+	/* FLCTL */
+	FCE1_MARK,	FCE0_MARK,	FRB_MARK,
+
+	/* HSI */
+	GP_RX_FLAG_MARK,	GP_RX_DATA_MARK,	GP_TX_READY_MARK,
+	GP_RX_WAKE_MARK,	MP_TX_FLAG_MARK,	MP_TX_DATA_MARK,
+	MP_RX_READY_MARK,	MP_TX_WAKE_MARK,
+
+	/* MFI */
+	MFIv6_MARK,
+	MFIv4_MARK,
+
+	MEMC_CS0_MARK,			MEMC_BUSCLK_MEMC_A0_MARK,
+	MEMC_CS1_MEMC_A1_MARK,		MEMC_ADV_MEMC_DREQ0_MARK,
+	MEMC_WAIT_MEMC_DREQ1_MARK,	MEMC_NOE_MARK,
+	MEMC_NWE_MARK,			MEMC_INT_MARK,
+
+	MEMC_AD0_MARK,	MEMC_AD1_MARK,	MEMC_AD2_MARK,
+	MEMC_AD3_MARK,	MEMC_AD4_MARK,	MEMC_AD5_MARK,
+	MEMC_AD6_MARK,	MEMC_AD7_MARK,	MEMC_AD8_MARK,
+	MEMC_AD9_MARK,	MEMC_AD10_MARK,	MEMC_AD11_MARK,
+	MEMC_AD12_MARK,	MEMC_AD13_MARK,	MEMC_AD14_MARK,
+	MEMC_AD15_MARK,
+
+	/* SIM */
+	SIM_RST_MARK,	SIM_CLK_MARK,	SIM_D_MARK,
+
+	/* TPU */
+	TPU0TO0_MARK,		TPU0TO1_MARK,
+	TPU0TO2_93_MARK,	TPU0TO2_99_MARK,
+	TPU0TO3_MARK,
+
+	/* I2C2 */
+	I2C_SCL2_MARK,	I2C_SDA2_MARK,
+
+	/* I2C3(1) */
+	I2C_SCL3_MARK,	I2C_SDA3_MARK,
+
+	/* I2C3(2) */
+	I2C_SCL3S_MARK,	I2C_SDA3S_MARK,
+
+	/* I2C4(2) */
+	I2C_SCL4_MARK,	I2C_SDA4_MARK,
+
+	/* I2C4(2) */
+	I2C_SCL4S_MARK,	I2C_SDA4S_MARK,
+
+	/* KEYSC */
+	KEYOUT0_MARK,	KEYIN0_121_MARK,	KEYIN0_136_MARK,
+	KEYOUT1_MARK,	KEYIN1_122_MARK,	KEYIN1_135_MARK,
+	KEYOUT2_MARK,	KEYIN2_123_MARK,	KEYIN2_134_MARK,
+	KEYOUT3_MARK,	KEYIN3_124_MARK,	KEYIN3_133_MARK,
+	KEYOUT4_MARK,	KEYIN4_MARK,
+	KEYOUT5_MARK,	KEYIN5_MARK,
+	KEYOUT6_MARK,	KEYIN6_MARK,
+	KEYOUT7_MARK,	KEYIN7_MARK,
+
+	/* LCDC */
+	LCDC0_SELECT_MARK,
+	LCDC1_SELECT_MARK,
+	LCDHSYN_MARK,	LCDCS_MARK,	LCDVSYN_MARK,	LCDDCK_MARK,
+	LCDWR_MARK,	LCDRD_MARK,	LCDDISP_MARK,	LCDRS_MARK,
+	LCDLCLK_MARK,	LCDDON_MARK,
+
+	LCDD0_MARK,	LCDD1_MARK,	LCDD2_MARK,	LCDD3_MARK,
+	LCDD4_MARK,	LCDD5_MARK,	LCDD6_MARK,	LCDD7_MARK,
+	LCDD8_MARK,	LCDD9_MARK,	LCDD10_MARK,	LCDD11_MARK,
+	LCDD12_MARK,	LCDD13_MARK,	LCDD14_MARK,	LCDD15_MARK,
+	LCDD16_MARK,	LCDD17_MARK,	LCDD18_MARK,	LCDD19_MARK,
+	LCDD20_MARK,	LCDD21_MARK,	LCDD22_MARK,	LCDD23_MARK,
+
+	/* IRDA */
+	IRDA_OUT_MARK,	IRDA_IN_MARK,	IRDA_FIRSEL_MARK,
+	IROUT_139_MARK,	IROUT_140_MARK,
+
+	/* TSIF1 */
+	TS0_1SELECT_MARK,
+	TS0_2SELECT_MARK,
+	TS1_1SELECT_MARK,
+	TS1_2SELECT_MARK,
+
+	TS_SPSYNC1_MARK,	TS_SDAT1_MARK,
+	TS_SDEN1_MARK,		TS_SCK1_MARK,
+
+	/* TSIF2 */
+	TS_SPSYNC2_MARK,	TS_SDAT2_MARK,
+	TS_SDEN2_MARK,		TS_SCK2_MARK,
+
+	/* HDMI */
+	HDMI_HPD_MARK,	HDMI_CEC_MARK,
+
+	/* SDHI0 */
+	SDHICLK0_MARK,	SDHICD0_MARK,
+	SDHICMD0_MARK,	SDHIWP0_MARK,
+	SDHID0_0_MARK,	SDHID0_1_MARK,
+	SDHID0_2_MARK,	SDHID0_3_MARK,
+
+	/* SDHI1 */
+	SDHICLK1_MARK,	SDHICMD1_MARK,	SDHID1_0_MARK,
+	SDHID1_1_MARK,	SDHID1_2_MARK,	SDHID1_3_MARK,
+
+	/* SDHI2 */
+	SDHICLK2_MARK,	SDHICMD2_MARK,	SDHID2_0_MARK,
+	SDHID2_1_MARK,	SDHID2_2_MARK,	SDHID2_3_MARK,
+
+	/* SDENC */
+	SDENC_CPG_MARK,
+	SDENC_DV_CLKI_MARK,
+
+	PINMUX_MARK_END,
+};
+
+/* PORT_DATA_I_PD(nr) */
+#define _I___D(nr)			     \
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+		    PORT##nr##_IN, PORT##nr##_IN_PD)
+
+/* PORT_DATA_I_PU(nr) */
+#define _I__U_(nr)			     \
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+		    PORT##nr##_IN, PORT##nr##_IN_PU)
+
+/* PORT_DATA_I_PU_PD(nr) */
+#define _I__UD(nr)			     \
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+		    PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
+
+/* PORT_DATA_O(nr) */
+#define __O___(nr)							\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT)
+
+/* PORT_DATA_IO(nr) */
+#define _IO___(nr)				     \
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+		    PORT##nr##_IN)
+
+/* PORT_DATA_IO_PD(nr) */
+#define _IO__D(nr)					     \
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+		    PORT##nr##_IN, PORT##nr##_IN_PD)
+
+/* PORT_DATA_IO_PU(nr) */
+#define _IO_U_(nr)					     \
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+		    PORT##nr##_IN, PORT##nr##_IN_PU)
+
+/* PORT_DATA_IO_PU_PD(nr) */
+#define _IO_UD(nr)					     \
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+		    PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
+
+
+static pinmux_enum_t pinmux_data[] = {
+
+	/* specify valid pin states for each pin in GPIO mode */
+
+	_IO__D(0), _IO__D(1), __O___(2), _I___D(3), _I___D(4),
+	_I___D(5), _IO_UD(6), _I___D(7), _IO__D(8), __O___(9),
+
+	__O___(10), __O___(11), _IO_UD(12), _IO__D(13), _IO__D(14),
+	__O___(15), _IO__D(16), _IO__D(17), _I___D(18), _IO___(19),
+
+	_IO___(20), _IO___(21), _IO___(22), _IO___(23), _IO___(24),
+	_IO___(25), _IO___(26), _IO___(27), _IO___(28), _IO___(29),
+
+	_IO___(30), _IO___(31), _IO___(32), _IO___(33), _IO___(34),
+	_IO___(35), _IO___(36), _IO___(37), _IO___(38), _IO___(39),
+
+	_IO___(40), _IO___(41), _IO___(42), _IO___(43), _IO___(44),
+	_IO___(45), _IO_U_(46), _IO_U_(47), _IO_U_(48), _IO_U_(49),
+
+	_IO_U_(50), _IO_U_(51), _IO_U_(52), _IO_U_(53), _IO_U_(54),
+	_IO_U_(55), _IO_U_(56), _IO_U_(57), _IO_U_(58), _IO_U_(59),
+
+	_IO_U_(60), _IO_U_(61), _IO___(62), __O___(63), __O___(64),
+	_IO_U_(65), __O___(66), _IO_U_(67), __O___(68), _IO___(69), /*66?*/
+
+	_IO___(70), _IO___(71), __O___(72), _I__U_(73), _I__UD(74),
+	_IO_UD(75), _IO_UD(76), _IO_UD(77), _IO_UD(78), _IO_UD(79),
+
+	_IO_UD(80), _IO_UD(81), _IO_UD(82), _IO_UD(83), _IO_UD(84),
+	_IO_UD(85), _IO_UD(86), _IO_UD(87), _IO_UD(88), _IO_UD(89),
+
+	_IO_UD(90), _IO_UD(91), _IO_UD(92), _IO_UD(93), _IO_UD(94),
+	_IO_UD(95), _IO_U_(96), _IO_UD(97), _IO_UD(98), __O___(99), /*99?*/
+
+	_IO__D(100), _IO__D(101), _IO__D(102), _IO__D(103), _IO__D(104),
+	_IO__D(105), _IO_U_(106), _IO_U_(107), _IO_U_(108), _IO_U_(109),
+
+	_IO_U_(110), _IO_U_(111), _IO__D(112), _IO__D(113), _IO_U_(114),
+	_IO_U_(115), _IO_U_(116), _IO_U_(117), _IO_U_(118), _IO_U_(119),
+
+	_IO_U_(120), _IO__D(121), _IO__D(122), _IO__D(123), _IO__D(124),
+	_IO__D(125), _IO__D(126), _IO__D(127), _IO__D(128), _IO_UD(129),
+
+	_IO_UD(130), _IO_UD(131), _IO_UD(132), _IO_UD(133), _IO_UD(134),
+	_IO_UD(135), _IO__D(136), _IO__D(137), _IO__D(138), _IO__D(139),
+
+	_IO__D(140), _IO__D(141), _IO__D(142), _IO_UD(143), _IO__D(144),
+	_IO__D(145), _IO__D(146), _IO__D(147), _IO__D(148), _IO__D(149),
+
+	_IO__D(150), _IO__D(151), _IO_UD(152), _I___D(153), _IO_UD(154),
+	_I___D(155), _IO__D(156), _IO__D(157), _I___D(158), _IO__D(159),
+
+	__O___(160), _IO__D(161), _IO__D(162), _IO__D(163), _I___D(164),
+	_IO__D(165), _I___D(166), _I___D(167), _I___D(168), _I___D(169),
+
+	_I___D(170), __O___(171), _IO_UD(172), _IO_UD(173), _IO_UD(174),
+	_IO_UD(175), _IO_UD(176), _IO_UD(177), _IO_UD(178), __O___(179),
+
+	_IO_UD(180), _IO_UD(181), _IO_UD(182), _IO_UD(183), _IO_UD(184),
+	__O___(185), _IO_UD(186), _IO_UD(187), _IO_UD(188), _IO_UD(189),
+
+	_IO_UD(190),
+
+	/* IRQ */
+	PINMUX_DATA(IRQ0_6_MARK,	PORT6_FN0, 	MSEL1CR_0_0),
+	PINMUX_DATA(IRQ0_162_MARK,	PORT162_FN0,	MSEL1CR_0_1),
+	PINMUX_DATA(IRQ1_MARK,		PORT12_FN0),
+	PINMUX_DATA(IRQ2_4_MARK,	PORT4_FN0,	MSEL1CR_2_0),
+	PINMUX_DATA(IRQ2_5_MARK,	PORT5_FN0,	MSEL1CR_2_1),
+	PINMUX_DATA(IRQ3_8_MARK,	PORT8_FN0,	MSEL1CR_3_0),
+	PINMUX_DATA(IRQ3_16_MARK,	PORT16_FN0,	MSEL1CR_3_1),
+	PINMUX_DATA(IRQ4_17_MARK,	PORT17_FN0,	MSEL1CR_4_0),
+	PINMUX_DATA(IRQ4_163_MARK,	PORT163_FN0,	MSEL1CR_4_1),
+	PINMUX_DATA(IRQ5_MARK,		PORT18_FN0),
+	PINMUX_DATA(IRQ6_39_MARK,	PORT39_FN0,	MSEL1CR_6_0),
+	PINMUX_DATA(IRQ6_164_MARK,	PORT164_FN0,	MSEL1CR_6_1),
+	PINMUX_DATA(IRQ7_40_MARK,	PORT40_FN0,	MSEL1CR_7_1),
+	PINMUX_DATA(IRQ7_167_MARK,	PORT167_FN0,	MSEL1CR_7_0),
+	PINMUX_DATA(IRQ8_41_MARK,	PORT41_FN0,	MSEL1CR_8_1),
+	PINMUX_DATA(IRQ8_168_MARK,	PORT168_FN0,	MSEL1CR_8_0),
+	PINMUX_DATA(IRQ9_42_MARK,	PORT42_FN0,	MSEL1CR_9_0),
+	PINMUX_DATA(IRQ9_169_MARK,	PORT169_FN0,	MSEL1CR_9_1),
+	PINMUX_DATA(IRQ10_MARK,		PORT65_FN0,	MSEL1CR_9_1),
+	PINMUX_DATA(IRQ11_MARK,		PORT67_FN0),
+	PINMUX_DATA(IRQ12_80_MARK,	PORT80_FN0,	MSEL1CR_12_0),
+	PINMUX_DATA(IRQ12_137_MARK,	PORT137_FN0,	MSEL1CR_12_1),
+	PINMUX_DATA(IRQ13_81_MARK,	PORT81_FN0,	MSEL1CR_13_0),
+	PINMUX_DATA(IRQ13_145_MARK,	PORT145_FN0,	MSEL1CR_13_1),
+	PINMUX_DATA(IRQ14_82_MARK,	PORT82_FN0,	MSEL1CR_14_0),
+	PINMUX_DATA(IRQ14_146_MARK,	PORT146_FN0,	MSEL1CR_14_1),
+	PINMUX_DATA(IRQ15_83_MARK,	PORT83_FN0,	MSEL1CR_15_0),
+	PINMUX_DATA(IRQ15_147_MARK,	PORT147_FN0,	MSEL1CR_15_1),
+	PINMUX_DATA(IRQ16_84_MARK,	PORT84_FN0,	MSEL1CR_16_0),
+	PINMUX_DATA(IRQ16_170_MARK,	PORT170_FN0,	MSEL1CR_16_1),
+	PINMUX_DATA(IRQ17_MARK,		PORT85_FN0),
+	PINMUX_DATA(IRQ18_MARK,		PORT86_FN0),
+	PINMUX_DATA(IRQ19_MARK,		PORT87_FN0),
+	PINMUX_DATA(IRQ20_MARK,		PORT92_FN0),
+	PINMUX_DATA(IRQ21_MARK,		PORT93_FN0),
+	PINMUX_DATA(IRQ22_MARK,		PORT94_FN0),
+	PINMUX_DATA(IRQ23_MARK,		PORT95_FN0),
+	PINMUX_DATA(IRQ24_MARK,		PORT112_FN0),
+	PINMUX_DATA(IRQ25_MARK,		PORT119_FN0),
+	PINMUX_DATA(IRQ26_121_MARK,	PORT121_FN0,	MSEL1CR_26_1),
+	PINMUX_DATA(IRQ26_172_MARK,	PORT172_FN0,	MSEL1CR_26_0),
+	PINMUX_DATA(IRQ27_122_MARK,	PORT122_FN0,	MSEL1CR_27_1),
+	PINMUX_DATA(IRQ27_180_MARK,	PORT180_FN0,	MSEL1CR_27_0),
+	PINMUX_DATA(IRQ28_123_MARK,	PORT123_FN0,	MSEL1CR_28_1),
+	PINMUX_DATA(IRQ28_181_MARK,	PORT181_FN0,	MSEL1CR_28_0),
+	PINMUX_DATA(IRQ29_129_MARK,	PORT129_FN0,	MSEL1CR_29_1),
+	PINMUX_DATA(IRQ29_182_MARK,	PORT182_FN0,	MSEL1CR_29_0),
+	PINMUX_DATA(IRQ30_130_MARK,	PORT130_FN0,	MSEL1CR_30_1),
+	PINMUX_DATA(IRQ30_183_MARK,	PORT183_FN0,	MSEL1CR_30_0),
+	PINMUX_DATA(IRQ31_138_MARK,	PORT138_FN0,	MSEL1CR_31_1),
+	PINMUX_DATA(IRQ31_184_MARK,	PORT184_FN0,	MSEL1CR_31_0),
+
+	/* Function 1 */
+	PINMUX_DATA(BBIF2_TSCK1_MARK,		PORT0_FN1),
+	PINMUX_DATA(BBIF2_TSYNC1_MARK,		PORT1_FN1),
+	PINMUX_DATA(BBIF2_TXD1_MARK,		PORT2_FN1),
+	PINMUX_DATA(BBIF2_RXD_MARK,		PORT3_FN1),
+	PINMUX_DATA(FSIACK_MARK,		PORT4_FN1),
+	PINMUX_DATA(FSIAILR_MARK,		PORT5_FN1),
+	PINMUX_DATA(FSIAIBT_MARK,		PORT6_FN1),
+	PINMUX_DATA(FSIAISLD_MARK,		PORT7_FN1),
+	PINMUX_DATA(FSIAOMC_MARK,		PORT8_FN1),
+	PINMUX_DATA(FSIAOLR_MARK,		PORT9_FN1),
+	PINMUX_DATA(FSIAOBT_MARK,		PORT10_FN1),
+	PINMUX_DATA(FSIAOSLD_MARK,		PORT11_FN1),
+	PINMUX_DATA(FMSOCK_MARK,		PORT12_FN1),
+	PINMUX_DATA(FMSOOLR_MARK,		PORT13_FN1),
+	PINMUX_DATA(FMSOOBT_MARK,		PORT14_FN1),
+	PINMUX_DATA(FMSOSLD_MARK,		PORT15_FN1),
+	PINMUX_DATA(FMSOILR_MARK,		PORT16_FN1),
+	PINMUX_DATA(FMSOIBT_MARK,		PORT17_FN1),
+	PINMUX_DATA(FMSISLD_MARK,		PORT18_FN1),
+	PINMUX_DATA(A0_MARK,			PORT19_FN1),
+	PINMUX_DATA(A1_MARK,			PORT20_FN1),
+	PINMUX_DATA(A2_MARK,			PORT21_FN1),
+	PINMUX_DATA(A3_MARK,			PORT22_FN1),
+	PINMUX_DATA(A4_FOE_MARK,		PORT23_FN1),
+	PINMUX_DATA(A5_FCDE_MARK,		PORT24_FN1),
+	PINMUX_DATA(A6_MARK,			PORT25_FN1),
+	PINMUX_DATA(A7_MARK,			PORT26_FN1),
+	PINMUX_DATA(A8_MARK,			PORT27_FN1),
+	PINMUX_DATA(A9_MARK,			PORT28_FN1),
+	PINMUX_DATA(A10_MARK,			PORT29_FN1),
+	PINMUX_DATA(A11_MARK,			PORT30_FN1),
+	PINMUX_DATA(A12_MARK,			PORT31_FN1),
+	PINMUX_DATA(A13_MARK,			PORT32_FN1),
+	PINMUX_DATA(A14_MARK,			PORT33_FN1),
+	PINMUX_DATA(A15_MARK,			PORT34_FN1),
+	PINMUX_DATA(A16_MARK,			PORT35_FN1),
+	PINMUX_DATA(A17_MARK,			PORT36_FN1),
+	PINMUX_DATA(A18_MARK,			PORT37_FN1),
+	PINMUX_DATA(A19_MARK,			PORT38_FN1),
+	PINMUX_DATA(A20_MARK,			PORT39_FN1),
+	PINMUX_DATA(A21_MARK,			PORT40_FN1),
+	PINMUX_DATA(A22_MARK,			PORT41_FN1),
+	PINMUX_DATA(A23_MARK,			PORT42_FN1),
+	PINMUX_DATA(A24_MARK,			PORT43_FN1),
+	PINMUX_DATA(A25_MARK,			PORT44_FN1),
+	PINMUX_DATA(A26_MARK,			PORT45_FN1),
+	PINMUX_DATA(D0_NAF0_MARK,		PORT46_FN1),
+	PINMUX_DATA(D1_NAF1_MARK,		PORT47_FN1),
+	PINMUX_DATA(D2_NAF2_MARK,		PORT48_FN1),
+	PINMUX_DATA(D3_NAF3_MARK,		PORT49_FN1),
+	PINMUX_DATA(D4_NAF4_MARK,		PORT50_FN1),
+	PINMUX_DATA(D5_NAF5_MARK,		PORT51_FN1),
+	PINMUX_DATA(D6_NAF6_MARK,		PORT52_FN1),
+	PINMUX_DATA(D7_NAF7_MARK,		PORT53_FN1),
+	PINMUX_DATA(D8_NAF8_MARK,		PORT54_FN1),
+	PINMUX_DATA(D9_NAF9_MARK,		PORT55_FN1),
+	PINMUX_DATA(D10_NAF10_MARK,		PORT56_FN1),
+	PINMUX_DATA(D11_NAF11_MARK,		PORT57_FN1),
+	PINMUX_DATA(D12_NAF12_MARK,		PORT58_FN1),
+	PINMUX_DATA(D13_NAF13_MARK,		PORT59_FN1),
+	PINMUX_DATA(D14_NAF14_MARK,		PORT60_FN1),
+	PINMUX_DATA(D15_NAF15_MARK,		PORT61_FN1),
+	PINMUX_DATA(CS0_MARK,			PORT62_FN1),
+	PINMUX_DATA(CS2_MARK,			PORT63_FN1),
+	PINMUX_DATA(CS4_MARK,			PORT64_FN1),
+	PINMUX_DATA(CS5A_MARK,			PORT65_FN1),
+	PINMUX_DATA(CS5B_MARK,			PORT66_FN1),
+	PINMUX_DATA(CS6A_MARK,			PORT67_FN1),
+	PINMUX_DATA(FCE0_MARK,			PORT68_FN1),
+	PINMUX_DATA(RD_FSC_MARK,		PORT69_FN1),
+	PINMUX_DATA(WE0_FWE_MARK,		PORT70_FN1),
+	PINMUX_DATA(WE1_MARK,			PORT71_FN1),
+	PINMUX_DATA(CKO_MARK,			PORT72_FN1),
+	PINMUX_DATA(FRB_MARK,			PORT73_FN1),
+	PINMUX_DATA(WAIT_MARK,			PORT74_FN1),
+	PINMUX_DATA(RDWR_MARK,			PORT75_FN1),
+	PINMUX_DATA(MEMC_AD0_MARK,		PORT76_FN1),
+	PINMUX_DATA(MEMC_AD1_MARK,		PORT77_FN1),
+	PINMUX_DATA(MEMC_AD2_MARK,		PORT78_FN1),
+	PINMUX_DATA(MEMC_AD3_MARK,		PORT79_FN1),
+	PINMUX_DATA(MEMC_AD4_MARK,		PORT80_FN1),
+	PINMUX_DATA(MEMC_AD5_MARK,		PORT81_FN1),
+	PINMUX_DATA(MEMC_AD6_MARK,		PORT82_FN1),
+	PINMUX_DATA(MEMC_AD7_MARK,		PORT83_FN1),
+	PINMUX_DATA(MEMC_AD8_MARK,		PORT84_FN1),
+	PINMUX_DATA(MEMC_AD9_MARK,		PORT85_FN1),
+	PINMUX_DATA(MEMC_AD10_MARK,		PORT86_FN1),
+	PINMUX_DATA(MEMC_AD11_MARK,		PORT87_FN1),
+	PINMUX_DATA(MEMC_AD12_MARK,		PORT88_FN1),
+	PINMUX_DATA(MEMC_AD13_MARK,		PORT89_FN1),
+	PINMUX_DATA(MEMC_AD14_MARK,		PORT90_FN1),
+	PINMUX_DATA(MEMC_AD15_MARK,		PORT91_FN1),
+	PINMUX_DATA(MEMC_CS0_MARK,		PORT92_FN1),
+	PINMUX_DATA(MEMC_BUSCLK_MEMC_A0_MARK,	PORT93_FN1),
+	PINMUX_DATA(MEMC_CS1_MEMC_A1_MARK,	PORT94_FN1),
+	PINMUX_DATA(MEMC_ADV_MEMC_DREQ0_MARK,	PORT95_FN1),
+	PINMUX_DATA(MEMC_WAIT_MEMC_DREQ1_MARK,	PORT96_FN1),
+	PINMUX_DATA(MEMC_NOE_MARK,		PORT97_FN1),
+	PINMUX_DATA(MEMC_NWE_MARK,		PORT98_FN1),
+	PINMUX_DATA(MEMC_INT_MARK,		PORT99_FN1),
+	PINMUX_DATA(VIO_VD_MARK,		PORT100_FN1),
+	PINMUX_DATA(VIO_HD_MARK,		PORT101_FN1),
+	PINMUX_DATA(VIO_D0_MARK,		PORT102_FN1),
+	PINMUX_DATA(VIO_D1_MARK,		PORT103_FN1),
+	PINMUX_DATA(VIO_D2_MARK,		PORT104_FN1),
+	PINMUX_DATA(VIO_D3_MARK,		PORT105_FN1),
+	PINMUX_DATA(VIO_D4_MARK,		PORT106_FN1),
+	PINMUX_DATA(VIO_D5_MARK,		PORT107_FN1),
+	PINMUX_DATA(VIO_D6_MARK,		PORT108_FN1),
+	PINMUX_DATA(VIO_D7_MARK,		PORT109_FN1),
+	PINMUX_DATA(VIO_D8_MARK,		PORT110_FN1),
+	PINMUX_DATA(VIO_D9_MARK,		PORT111_FN1),
+	PINMUX_DATA(VIO_D10_MARK,		PORT112_FN1),
+	PINMUX_DATA(VIO_D11_MARK,		PORT113_FN1),
+	PINMUX_DATA(VIO_D12_MARK,		PORT114_FN1),
+	PINMUX_DATA(VIO_D13_MARK,		PORT115_FN1),
+	PINMUX_DATA(VIO_D14_MARK,		PORT116_FN1),
+	PINMUX_DATA(VIO_D15_MARK,		PORT117_FN1),
+	PINMUX_DATA(VIO_CLK_MARK,		PORT118_FN1),
+	PINMUX_DATA(VIO_FIELD_MARK,		PORT119_FN1),
+	PINMUX_DATA(VIO_CKO_MARK,		PORT120_FN1),
+	PINMUX_DATA(LCDD0_MARK,			PORT121_FN1),
+	PINMUX_DATA(LCDD1_MARK,			PORT122_FN1),
+	PINMUX_DATA(LCDD2_MARK,			PORT123_FN1),
+	PINMUX_DATA(LCDD3_MARK,			PORT124_FN1),
+	PINMUX_DATA(LCDD4_MARK,			PORT125_FN1),
+	PINMUX_DATA(LCDD5_MARK,			PORT126_FN1),
+	PINMUX_DATA(LCDD6_MARK,			PORT127_FN1),
+	PINMUX_DATA(LCDD7_MARK,			PORT128_FN1),
+	PINMUX_DATA(LCDD8_MARK,			PORT129_FN1),
+	PINMUX_DATA(LCDD9_MARK,			PORT130_FN1),
+	PINMUX_DATA(LCDD10_MARK,		PORT131_FN1),
+	PINMUX_DATA(LCDD11_MARK,		PORT132_FN1),
+	PINMUX_DATA(LCDD12_MARK,		PORT133_FN1),
+	PINMUX_DATA(LCDD13_MARK,		PORT134_FN1),
+	PINMUX_DATA(LCDD14_MARK,		PORT135_FN1),
+	PINMUX_DATA(LCDD15_MARK,		PORT136_FN1),
+	PINMUX_DATA(LCDD16_MARK,		PORT137_FN1),
+	PINMUX_DATA(LCDD17_MARK,		PORT138_FN1),
+	PINMUX_DATA(LCDD18_MARK,		PORT139_FN1),
+	PINMUX_DATA(LCDD19_MARK,		PORT140_FN1),
+	PINMUX_DATA(LCDD20_MARK,		PORT141_FN1),
+	PINMUX_DATA(LCDD21_MARK,		PORT142_FN1),
+	PINMUX_DATA(LCDD22_MARK,		PORT143_FN1),
+	PINMUX_DATA(LCDD23_MARK,		PORT144_FN1),
+	PINMUX_DATA(LCDHSYN_MARK,		PORT145_FN1),
+	PINMUX_DATA(LCDVSYN_MARK,		PORT146_FN1),
+	PINMUX_DATA(LCDDCK_MARK,		PORT147_FN1),
+	PINMUX_DATA(LCDRD_MARK,			PORT148_FN1),
+	PINMUX_DATA(LCDDISP_MARK,		PORT149_FN1),
+	PINMUX_DATA(LCDLCLK_MARK,		PORT150_FN1),
+	PINMUX_DATA(LCDDON_MARK,		PORT151_FN1),
+	PINMUX_DATA(SCIFA0_TXD_MARK,		PORT152_FN1),
+	PINMUX_DATA(SCIFA0_RXD_MARK,		PORT153_FN1),
+	PINMUX_DATA(SCIFA1_TXD_MARK,		PORT154_FN1),
+	PINMUX_DATA(SCIFA1_RXD_MARK,		PORT155_FN1),
+	PINMUX_DATA(TS_SPSYNC1_MARK,		PORT156_FN1),
+	PINMUX_DATA(TS_SDAT1_MARK,		PORT157_FN1),
+	PINMUX_DATA(TS_SDEN1_MARK,		PORT158_FN1),
+	PINMUX_DATA(TS_SCK1_MARK,		PORT159_FN1),
+	PINMUX_DATA(TPU0TO0_MARK,		PORT160_FN1),
+	PINMUX_DATA(TPU0TO1_MARK,		PORT161_FN1),
+	PINMUX_DATA(SCIFB_SCK_MARK,		PORT162_FN1),
+	PINMUX_DATA(SCIFB_RTS_MARK,		PORT163_FN1),
+	PINMUX_DATA(SCIFB_CTS_MARK,		PORT164_FN1),
+	PINMUX_DATA(SCIFB_TXD_MARK,		PORT165_FN1),
+	PINMUX_DATA(SCIFB_RXD_MARK,		PORT166_FN1),
+	PINMUX_DATA(VBUS0_0_MARK,		PORT167_FN1),
+	PINMUX_DATA(VBUS0_1_MARK,		PORT168_FN1),
+	PINMUX_DATA(HDMI_HPD_MARK,		PORT169_FN1),
+	PINMUX_DATA(HDMI_CEC_MARK,		PORT170_FN1),
+	PINMUX_DATA(SDHICLK0_MARK,		PORT171_FN1),
+	PINMUX_DATA(SDHICD0_MARK,		PORT172_FN1),
+	PINMUX_DATA(SDHID0_0_MARK,		PORT173_FN1),
+	PINMUX_DATA(SDHID0_1_MARK,		PORT174_FN1),
+	PINMUX_DATA(SDHID0_2_MARK,		PORT175_FN1),
+	PINMUX_DATA(SDHID0_3_MARK,		PORT176_FN1),
+	PINMUX_DATA(SDHICMD0_MARK,		PORT177_FN1),
+	PINMUX_DATA(SDHIWP0_MARK,		PORT178_FN1),
+	PINMUX_DATA(SDHICLK1_MARK,		PORT179_FN1),
+	PINMUX_DATA(SDHID1_0_MARK,		PORT180_FN1),
+	PINMUX_DATA(SDHID1_1_MARK,		PORT181_FN1),
+	PINMUX_DATA(SDHID1_2_MARK,		PORT182_FN1),
+	PINMUX_DATA(SDHID1_3_MARK,		PORT183_FN1),
+	PINMUX_DATA(SDHICMD1_MARK,		PORT184_FN1),
+	PINMUX_DATA(SDHICLK2_MARK,		PORT185_FN1),
+	PINMUX_DATA(SDHID2_0_MARK,		PORT186_FN1),
+	PINMUX_DATA(SDHID2_1_MARK,		PORT187_FN1),
+	PINMUX_DATA(SDHID2_2_MARK,		PORT188_FN1),
+	PINMUX_DATA(SDHID2_3_MARK,		PORT189_FN1),
+	PINMUX_DATA(SDHICMD2_MARK,		PORT190_FN1),
+
+	/* Function 2 */
+	PINMUX_DATA(FSIBCK_MARK,		PORT4_FN2),
+	PINMUX_DATA(SCIFA4_RXD_MARK,		PORT5_FN2),
+	PINMUX_DATA(SCIFA4_TXD_MARK,		PORT6_FN2),
+	PINMUX_DATA(SCIFA5_RXD_MARK,		PORT8_FN2),
+	PINMUX_DATA(FSIASPDIF_11_MARK,		PORT11_FN2),
+	PINMUX_DATA(SCIFA5_TXD_MARK,		PORT12_FN2),
+	PINMUX_DATA(FMSIOLR_MARK,		PORT13_FN2),
+	PINMUX_DATA(FMSIOBT_MARK,		PORT14_FN2),
+	PINMUX_DATA(FSIASPDIF_15_MARK,		PORT15_FN2),
+	PINMUX_DATA(FMSIILR_MARK,		PORT16_FN2),
+	PINMUX_DATA(FMSIIBT_MARK,		PORT17_FN2),
+	PINMUX_DATA(BS_MARK,			PORT19_FN2),
+	PINMUX_DATA(MSIOF0_TSYNC_MARK,		PORT36_FN2),
+	PINMUX_DATA(MSIOF0_TSCK_MARK,		PORT37_FN2),
+	PINMUX_DATA(MSIOF0_RXD_MARK,		PORT38_FN2),
+	PINMUX_DATA(MSIOF0_RSCK_MARK,		PORT39_FN2),
+	PINMUX_DATA(MSIOF0_RSYNC_MARK,		PORT40_FN2),
+	PINMUX_DATA(MSIOF0_MCK0_MARK,		PORT41_FN2),
+	PINMUX_DATA(MSIOF0_MCK1_MARK,		PORT42_FN2),
+	PINMUX_DATA(MSIOF0_SS1_MARK,		PORT43_FN2),
+	PINMUX_DATA(MSIOF0_SS2_MARK,		PORT44_FN2),
+	PINMUX_DATA(MSIOF0_TXD_MARK,		PORT45_FN2),
+	PINMUX_DATA(FMSICK_MARK,		PORT65_FN2),
+	PINMUX_DATA(FCE1_MARK,			PORT66_FN2),
+	PINMUX_DATA(BBIF1_RXD_MARK,		PORT76_FN2),
+	PINMUX_DATA(BBIF1_TSYNC_MARK,		PORT77_FN2),
+	PINMUX_DATA(BBIF1_TSCK_MARK,		PORT78_FN2),
+	PINMUX_DATA(BBIF1_TXD_MARK,		PORT79_FN2),
+	PINMUX_DATA(BBIF1_RSCK_MARK,		PORT80_FN2),
+	PINMUX_DATA(BBIF1_RSYNC_MARK,		PORT81_FN2),
+	PINMUX_DATA(BBIF1_FLOW_MARK,		PORT82_FN2),
+	PINMUX_DATA(BB_RX_FLOW_N_MARK,		PORT83_FN2),
+	PINMUX_DATA(MSIOF1_RSCK_MARK,		PORT84_FN2),
+	PINMUX_DATA(MSIOF1_RSYNC_MARK,		PORT85_FN2),
+	PINMUX_DATA(MSIOF1_MCK0_MARK,		PORT86_FN2),
+	PINMUX_DATA(MSIOF1_MCK1_MARK,		PORT87_FN2),
+	PINMUX_DATA(MSIOF1_TSCK_88_MARK,	PORT88_FN2, MSEL4CR_10_1),
+	PINMUX_DATA(MSIOF1_TSYNC_89_MARK,	PORT89_FN2, MSEL4CR_10_1),
+	PINMUX_DATA(MSIOF1_TXD_90_MARK,		PORT90_FN2, MSEL4CR_10_1),
+	PINMUX_DATA(MSIOF1_RXD_91_MARK,		PORT91_FN2, MSEL4CR_10_1),
+	PINMUX_DATA(MSIOF1_SS1_92_MARK,		PORT92_FN2, MSEL4CR_10_1),
+	PINMUX_DATA(MSIOF1_SS2_93_MARK,		PORT93_FN2, MSEL4CR_10_1),
+	PINMUX_DATA(SCIFA2_CTS1_MARK,		PORT94_FN2),
+	PINMUX_DATA(SCIFA2_RTS1_MARK,		PORT95_FN2),
+	PINMUX_DATA(SCIFA2_TXD1_MARK,		PORT96_FN2),
+	PINMUX_DATA(SCIFA2_RXD1_MARK,		PORT97_FN2),
+	PINMUX_DATA(SCIFA2_SCK1_MARK,		PORT98_FN2),
+	PINMUX_DATA(I2C_SCL2_MARK,		PORT110_FN2),
+	PINMUX_DATA(I2C_SDA2_MARK,		PORT111_FN2),
+	PINMUX_DATA(I2C_SCL3_MARK,		PORT114_FN2, MSEL4CR_16_1),
+	PINMUX_DATA(I2C_SDA3_MARK,		PORT115_FN2, MSEL4CR_16_1),
+	PINMUX_DATA(I2C_SCL4_MARK,		PORT116_FN2, MSEL4CR_17_1),
+	PINMUX_DATA(I2C_SDA4_MARK,		PORT117_FN2, MSEL4CR_17_1),
+	PINMUX_DATA(MSIOF2_RSCK_MARK,		PORT134_FN2),
+	PINMUX_DATA(MSIOF2_RSYNC_MARK,		PORT135_FN2),
+	PINMUX_DATA(MSIOF2_MCK0_MARK,		PORT136_FN2),
+	PINMUX_DATA(MSIOF2_MCK1_MARK,		PORT137_FN2),
+	PINMUX_DATA(MSIOF2_SS1_MARK,		PORT138_FN2),
+	PINMUX_DATA(MSIOF2_SS2_MARK,		PORT139_FN2),
+	PINMUX_DATA(SCIFA3_CTS_140_MARK,	PORT140_FN2, MSEL3CR_9_1),
+	PINMUX_DATA(SCIFA3_RTS_141_MARK,	PORT141_FN2),
+	PINMUX_DATA(SCIFA3_SCK_MARK,		PORT142_FN2),
+	PINMUX_DATA(SCIFA3_TXD_MARK,		PORT143_FN2),
+	PINMUX_DATA(SCIFA3_RXD_MARK,		PORT144_FN2),
+	PINMUX_DATA(MSIOF2_TSYNC_MARK,		PORT148_FN2),
+	PINMUX_DATA(MSIOF2_TSCK_MARK,		PORT149_FN2),
+	PINMUX_DATA(MSIOF2_RXD_MARK,		PORT150_FN2),
+	PINMUX_DATA(MSIOF2_TXD_MARK,		PORT151_FN2),
+	PINMUX_DATA(SCIFA0_SCK_MARK,		PORT156_FN2),
+	PINMUX_DATA(SCIFA0_RTS_MARK,		PORT157_FN2),
+	PINMUX_DATA(SCIFA0_CTS_MARK,		PORT158_FN2),
+	PINMUX_DATA(SCIFA1_SCK_MARK,		PORT159_FN2),
+	PINMUX_DATA(SCIFA1_RTS_MARK,		PORT160_FN2),
+	PINMUX_DATA(SCIFA1_CTS_MARK,		PORT161_FN2),
+
+	/* Function 3 */
+	PINMUX_DATA(VIO_CKO1_MARK,		PORT16_FN3),
+	PINMUX_DATA(VIO_CKO2_MARK,		PORT17_FN3),
+	PINMUX_DATA(IDIN_1_18_MARK,		PORT18_FN3, MSEL4CR_14_1),
+	PINMUX_DATA(MSIOF1_TSCK_39_MARK,	PORT39_FN3, MSEL4CR_10_0),
+	PINMUX_DATA(MSIOF1_TSYNC_40_MARK,	PORT40_FN3, MSEL4CR_10_0),
+	PINMUX_DATA(MSIOF1_TXD_41_MARK,		PORT41_FN3, MSEL4CR_10_0),
+	PINMUX_DATA(MSIOF1_RXD_42_MARK,		PORT42_FN3, MSEL4CR_10_0),
+	PINMUX_DATA(MSIOF1_SS1_43_MARK,		PORT43_FN3, MSEL4CR_10_0),
+	PINMUX_DATA(MSIOF1_SS2_44_MARK,		PORT44_FN3, MSEL4CR_10_0),
+	PINMUX_DATA(MMCD1_0_MARK,		PORT54_FN3, MSEL4CR_15_1),
+	PINMUX_DATA(MMCD1_1_MARK,		PORT55_FN3, MSEL4CR_15_1),
+	PINMUX_DATA(MMCD1_2_MARK,		PORT56_FN3, MSEL4CR_15_1),
+	PINMUX_DATA(MMCD1_3_MARK,		PORT57_FN3, MSEL4CR_15_1),
+	PINMUX_DATA(MMCD1_4_MARK,		PORT58_FN3, MSEL4CR_15_1),
+	PINMUX_DATA(MMCD1_5_MARK,		PORT59_FN3, MSEL4CR_15_1),
+	PINMUX_DATA(MMCD1_6_MARK,		PORT60_FN3, MSEL4CR_15_1),
+	PINMUX_DATA(MMCD1_7_MARK,		PORT61_FN3, MSEL4CR_15_1),
+	PINMUX_DATA(VINT_I_MARK,		PORT65_FN3),
+	PINMUX_DATA(MMCCLK1_MARK,		PORT66_FN3, MSEL4CR_15_1),
+	PINMUX_DATA(MMCCMD1_MARK,		PORT67_FN3, MSEL4CR_15_1),
+	PINMUX_DATA(TPU0TO2_93_MARK,		PORT93_FN3),
+	PINMUX_DATA(TPU0TO2_99_MARK,		PORT99_FN3),
+	PINMUX_DATA(TPU0TO3_MARK,		PORT112_FN3),
+	PINMUX_DATA(IDIN_0_MARK,		PORT113_FN3),
+	PINMUX_DATA(EXTLP_0_MARK,		PORT114_FN3),
+	PINMUX_DATA(OVCN2_0_MARK,		PORT115_FN3),
+	PINMUX_DATA(PWEN_0_MARK,		PORT116_FN3),
+	PINMUX_DATA(OVCN_0_MARK,		PORT117_FN3),
+	PINMUX_DATA(KEYOUT7_MARK,		PORT121_FN3),
+	PINMUX_DATA(KEYOUT6_MARK,		PORT122_FN3),
+	PINMUX_DATA(KEYOUT5_MARK,		PORT123_FN3),
+	PINMUX_DATA(KEYOUT4_MARK,		PORT124_FN3),
+	PINMUX_DATA(KEYOUT3_MARK,		PORT125_FN3),
+	PINMUX_DATA(KEYOUT2_MARK,		PORT126_FN3),
+	PINMUX_DATA(KEYOUT1_MARK,		PORT127_FN3),
+	PINMUX_DATA(KEYOUT0_MARK,		PORT128_FN3),
+	PINMUX_DATA(KEYIN7_MARK,		PORT129_FN3),
+	PINMUX_DATA(KEYIN6_MARK,		PORT130_FN3),
+	PINMUX_DATA(KEYIN5_MARK,		PORT131_FN3),
+	PINMUX_DATA(KEYIN4_MARK,		PORT132_FN3),
+	PINMUX_DATA(KEYIN3_133_MARK,		PORT133_FN3, MSEL4CR_18_0),
+	PINMUX_DATA(KEYIN2_134_MARK,		PORT134_FN3, MSEL4CR_18_0),
+	PINMUX_DATA(KEYIN1_135_MARK,		PORT135_FN3, MSEL4CR_18_0),
+	PINMUX_DATA(KEYIN0_136_MARK,		PORT136_FN3, MSEL4CR_18_0),
+	PINMUX_DATA(TS_SPSYNC2_MARK,		PORT137_FN3),
+	PINMUX_DATA(IROUT_139_MARK,		PORT139_FN3),
+	PINMUX_DATA(IRDA_OUT_MARK,		PORT140_FN3),
+	PINMUX_DATA(IRDA_IN_MARK,		PORT141_FN3),
+	PINMUX_DATA(IRDA_FIRSEL_MARK,		PORT142_FN3),
+	PINMUX_DATA(TS_SDAT2_MARK,		PORT145_FN3),
+	PINMUX_DATA(TS_SDEN2_MARK,		PORT146_FN3),
+	PINMUX_DATA(TS_SCK2_MARK,		PORT147_FN3),
+
+	/* Function 4 */
+	PINMUX_DATA(SCIFA3_CTS_43_MARK,	PORT43_FN4, MSEL3CR_9_0),
+	PINMUX_DATA(SCIFA3_RTS_44_MARK,	PORT44_FN4),
+	PINMUX_DATA(GP_RX_FLAG_MARK,	PORT76_FN4),
+	PINMUX_DATA(GP_RX_DATA_MARK,	PORT77_FN4),
+	PINMUX_DATA(GP_TX_READY_MARK,	PORT78_FN4),
+	PINMUX_DATA(GP_RX_WAKE_MARK,	PORT79_FN4),
+	PINMUX_DATA(MP_TX_FLAG_MARK,	PORT80_FN4),
+	PINMUX_DATA(MP_TX_DATA_MARK,	PORT81_FN4),
+	PINMUX_DATA(MP_RX_READY_MARK,	PORT82_FN4),
+	PINMUX_DATA(MP_TX_WAKE_MARK,	PORT83_FN4),
+	PINMUX_DATA(MMCD0_0_MARK,	PORT84_FN4, MSEL4CR_15_0),
+	PINMUX_DATA(MMCD0_1_MARK,	PORT85_FN4, MSEL4CR_15_0),
+	PINMUX_DATA(MMCD0_2_MARK,	PORT86_FN4, MSEL4CR_15_0),
+	PINMUX_DATA(MMCD0_3_MARK,	PORT87_FN4, MSEL4CR_15_0),
+	PINMUX_DATA(MMCD0_4_MARK,	PORT88_FN4, MSEL4CR_15_0),
+	PINMUX_DATA(MMCD0_5_MARK,	PORT89_FN4, MSEL4CR_15_0),
+	PINMUX_DATA(MMCD0_6_MARK,	PORT90_FN4, MSEL4CR_15_0),
+	PINMUX_DATA(MMCD0_7_MARK,	PORT91_FN4, MSEL4CR_15_0),
+	PINMUX_DATA(MMCCMD0_MARK,	PORT92_FN4, MSEL4CR_15_0),
+	PINMUX_DATA(SIM_RST_MARK,	PORT94_FN4),
+	PINMUX_DATA(SIM_CLK_MARK,	PORT95_FN4),
+	PINMUX_DATA(SIM_D_MARK,		PORT98_FN4),
+	PINMUX_DATA(MMCCLK0_MARK,	PORT99_FN4, MSEL4CR_15_0),
+	PINMUX_DATA(IDIN_1_113_MARK,	PORT113_FN4, MSEL4CR_14_0),
+	PINMUX_DATA(OVCN_1_114_MARK,	PORT114_FN4, MSEL4CR_14_0),
+	PINMUX_DATA(PWEN_1_115_MARK,	PORT115_FN4),
+	PINMUX_DATA(EXTLP_1_MARK,	PORT116_FN4),
+	PINMUX_DATA(OVCN2_1_MARK,	PORT117_FN4),
+	PINMUX_DATA(KEYIN0_121_MARK,	PORT121_FN4, MSEL4CR_18_1),
+	PINMUX_DATA(KEYIN1_122_MARK,	PORT122_FN4, MSEL4CR_18_1),
+	PINMUX_DATA(KEYIN2_123_MARK,	PORT123_FN4, MSEL4CR_18_1),
+	PINMUX_DATA(KEYIN3_124_MARK,	PORT124_FN4, MSEL4CR_18_1),
+	PINMUX_DATA(PWEN_1_138_MARK,	PORT138_FN4),
+	PINMUX_DATA(IROUT_140_MARK,	PORT140_FN4),
+	PINMUX_DATA(LCDCS_MARK,		PORT145_FN4),
+	PINMUX_DATA(LCDWR_MARK,		PORT147_FN4),
+	PINMUX_DATA(LCDRS_MARK,		PORT149_FN4),
+	PINMUX_DATA(OVCN_1_162_MARK,	PORT162_FN4, MSEL4CR_14_1),
+
+	/* Function 5 */
+	PINMUX_DATA(GPI0_MARK,		PORT41_FN5),
+	PINMUX_DATA(GPI1_MARK,		PORT42_FN5),
+	PINMUX_DATA(GPO0_MARK,		PORT43_FN5),
+	PINMUX_DATA(GPO1_MARK,		PORT44_FN5),
+	PINMUX_DATA(I2C_SCL3S_MARK,	PORT137_FN5, MSEL4CR_16_0),
+	PINMUX_DATA(I2C_SDA3S_MARK,	PORT145_FN5, MSEL4CR_16_0),
+	PINMUX_DATA(I2C_SCL4S_MARK,	PORT146_FN5, MSEL4CR_17_0),
+	PINMUX_DATA(I2C_SDA4S_MARK,	PORT147_FN5, MSEL4CR_17_0),
+
+	/* Function select */
+	PINMUX_DATA(LCDC0_SELECT_MARK,	MSEL3CR_6_0),
+	PINMUX_DATA(LCDC1_SELECT_MARK,	MSEL3CR_6_1),
+
+	PINMUX_DATA(TS0_1SELECT_MARK,	MSEL3CR_21_0, MSEL3CR_20_0),
+	PINMUX_DATA(TS0_2SELECT_MARK,	MSEL3CR_21_0, MSEL3CR_20_1),
+	PINMUX_DATA(TS1_1SELECT_MARK,	MSEL3CR_27_0, MSEL3CR_26_0),
+	PINMUX_DATA(TS1_2SELECT_MARK,	MSEL3CR_27_0, MSEL3CR_26_1),
+
+	PINMUX_DATA(SDENC_CPG_MARK,	MSEL4CR_19_0),
+	PINMUX_DATA(SDENC_DV_CLKI_MARK,	MSEL4CR_19_1),
+
+	PINMUX_DATA(MFIv6_MARK,		MSEL4CR_6_0),
+	PINMUX_DATA(MFIv4_MARK,		MSEL4CR_6_1),
+};
+
+#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
+#define GPIO_PORT_ALL() _190(_GPIO_PORT, , unused)
+#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
+
+static struct pinmux_gpio pinmux_gpios[] = {
+
+	/* PORT */
+	GPIO_PORT_ALL(),
+
+	/* IRQ */
+	GPIO_FN(IRQ0_6),	GPIO_FN(IRQ0_162),	GPIO_FN(IRQ1),
+	GPIO_FN(IRQ2_4),	GPIO_FN(IRQ2_5),	GPIO_FN(IRQ3_8),
+	GPIO_FN(IRQ3_16),	GPIO_FN(IRQ4_17),	GPIO_FN(IRQ4_163),
+	GPIO_FN(IRQ5),		GPIO_FN(IRQ6_39),	GPIO_FN(IRQ6_164),
+	GPIO_FN(IRQ7_40),	GPIO_FN(IRQ7_167),	GPIO_FN(IRQ8_41),
+	GPIO_FN(IRQ8_168),	GPIO_FN(IRQ9_42),	GPIO_FN(IRQ9_169),
+	GPIO_FN(IRQ10),		GPIO_FN(IRQ11),		GPIO_FN(IRQ12_80),
+	GPIO_FN(IRQ12_137),	GPIO_FN(IRQ13_81),	GPIO_FN(IRQ13_145),
+	GPIO_FN(IRQ14_82),	GPIO_FN(IRQ14_146),	GPIO_FN(IRQ15_83),
+	GPIO_FN(IRQ15_147),	GPIO_FN(IRQ16_84),	GPIO_FN(IRQ16_170),
+	GPIO_FN(IRQ17),		GPIO_FN(IRQ18),		GPIO_FN(IRQ19),
+	GPIO_FN(IRQ20),		GPIO_FN(IRQ21),		GPIO_FN(IRQ22),
+	GPIO_FN(IRQ23),		GPIO_FN(IRQ24),		GPIO_FN(IRQ25),
+	GPIO_FN(IRQ26_121),	GPIO_FN(IRQ26_172),	GPIO_FN(IRQ27_122),
+	GPIO_FN(IRQ27_180),	GPIO_FN(IRQ28_123),	GPIO_FN(IRQ28_181),
+	GPIO_FN(IRQ29_129),	GPIO_FN(IRQ29_182),	GPIO_FN(IRQ30_130),
+	GPIO_FN(IRQ30_183),	GPIO_FN(IRQ31_138),	GPIO_FN(IRQ31_184),
+
+	/* MSIOF0 */
+	GPIO_FN(MSIOF0_TSYNC),	GPIO_FN(MSIOF0_TSCK),	GPIO_FN(MSIOF0_RXD),
+	GPIO_FN(MSIOF0_RSCK),	GPIO_FN(MSIOF0_RSYNC),	GPIO_FN(MSIOF0_MCK0),
+	GPIO_FN(MSIOF0_MCK1),	GPIO_FN(MSIOF0_SS1),	GPIO_FN(MSIOF0_SS2),
+	GPIO_FN(MSIOF0_TXD),
+
+	/* MSIOF1 */
+	GPIO_FN(MSIOF1_TSCK_39),	GPIO_FN(MSIOF1_TSCK_88),
+	GPIO_FN(MSIOF1_TSYNC_40),	GPIO_FN(MSIOF1_TSYNC_89),
+	GPIO_FN(MSIOF1_TXD_41),		GPIO_FN(MSIOF1_TXD_90),
+	GPIO_FN(MSIOF1_RXD_42),		GPIO_FN(MSIOF1_RXD_91),
+	GPIO_FN(MSIOF1_SS1_43),		GPIO_FN(MSIOF1_SS1_92),
+	GPIO_FN(MSIOF1_SS2_44),		GPIO_FN(MSIOF1_SS2_93),
+	GPIO_FN(MSIOF1_RSCK),		GPIO_FN(MSIOF1_RSYNC),
+	GPIO_FN(MSIOF1_MCK0),		GPIO_FN(MSIOF1_MCK1),
+
+	/* MSIOF2 */
+	GPIO_FN(MSIOF2_RSCK),	GPIO_FN(MSIOF2_RSYNC),	GPIO_FN(MSIOF2_MCK0),
+	GPIO_FN(MSIOF2_MCK1),	GPIO_FN(MSIOF2_SS1),	GPIO_FN(MSIOF2_SS2),
+	GPIO_FN(MSIOF2_TSYNC),	GPIO_FN(MSIOF2_TSCK),	GPIO_FN(MSIOF2_RXD),
+	GPIO_FN(MSIOF2_TXD),
+
+	/* MSIOF3 */
+	GPIO_FN(BBIF1_RXD),	GPIO_FN(BBIF1_TSYNC),	GPIO_FN(BBIF1_TSCK),
+	GPIO_FN(BBIF1_TXD),	GPIO_FN(BBIF1_RSCK),	GPIO_FN(BBIF1_RSYNC),
+	GPIO_FN(BBIF1_FLOW),	GPIO_FN(BB_RX_FLOW_N),
+
+	/* MSIOF4 */
+	GPIO_FN(BBIF2_TSCK1),	GPIO_FN(BBIF2_TSYNC1),
+	GPIO_FN(BBIF2_TXD1),	GPIO_FN(BBIF2_RXD),
+
+	/* FSI */
+	GPIO_FN(FSIACK),	GPIO_FN(FSIBCK),	GPIO_FN(FSIAILR),
+	GPIO_FN(FSIAIBT),	GPIO_FN(FSIAISLD),	GPIO_FN(FSIAOMC),
+	GPIO_FN(FSIAOLR),	GPIO_FN(FSIAOBT),	GPIO_FN(FSIAOSLD),
+	GPIO_FN(FSIASPDIF_11),	GPIO_FN(FSIASPDIF_15),
+
+	/* FMSI */
+	GPIO_FN(FMSOCK),	GPIO_FN(FMSOOLR),	GPIO_FN(FMSIOLR),
+	GPIO_FN(FMSOOBT),	GPIO_FN(FMSIOBT),	GPIO_FN(FMSOSLD),
+	GPIO_FN(FMSOILR),	GPIO_FN(FMSIILR),	GPIO_FN(FMSOIBT),
+	GPIO_FN(FMSIIBT),	GPIO_FN(FMSISLD),	GPIO_FN(FMSICK),
+
+	/* SCIFA0 */
+	GPIO_FN(SCIFA0_TXD),	GPIO_FN(SCIFA0_RXD),	GPIO_FN(SCIFA0_SCK),
+	GPIO_FN(SCIFA0_RTS),	GPIO_FN(SCIFA0_CTS),
+
+	/* SCIFA1 */
+	GPIO_FN(SCIFA1_TXD),	GPIO_FN(SCIFA1_RXD),	GPIO_FN(SCIFA1_SCK),
+	GPIO_FN(SCIFA1_RTS),	GPIO_FN(SCIFA1_CTS),
+
+	/* SCIFA2 */
+	GPIO_FN(SCIFA2_CTS1),	GPIO_FN(SCIFA2_RTS1),	GPIO_FN(SCIFA2_TXD1),
+	GPIO_FN(SCIFA2_RXD1),	GPIO_FN(SCIFA2_SCK1),
+
+	/* SCIFA3 */
+	GPIO_FN(SCIFA3_CTS_43),		GPIO_FN(SCIFA3_CTS_140),
+	GPIO_FN(SCIFA3_RTS_44),		GPIO_FN(SCIFA3_RTS_141),
+	GPIO_FN(SCIFA3_SCK),		GPIO_FN(SCIFA3_TXD),
+	GPIO_FN(SCIFA3_RXD),
+
+	/* SCIFA4 */
+	GPIO_FN(SCIFA4_RXD),	GPIO_FN(SCIFA4_TXD),
+
+	/* SCIFA5 */
+	GPIO_FN(SCIFA5_RXD),	GPIO_FN(SCIFA5_TXD),
+
+	/* SCIFB */
+	GPIO_FN(SCIFB_SCK),	GPIO_FN(SCIFB_RTS),	GPIO_FN(SCIFB_CTS),
+	GPIO_FN(SCIFB_TXD),	GPIO_FN(SCIFB_RXD),
+
+	/* CEU */
+	GPIO_FN(VIO_HD),	GPIO_FN(VIO_CKO1),	GPIO_FN(VIO_CKO2),
+	GPIO_FN(VIO_VD),	GPIO_FN(VIO_CLK),	GPIO_FN(VIO_FIELD),
+	GPIO_FN(VIO_CKO),	GPIO_FN(VIO_D0),	GPIO_FN(VIO_D1),
+	GPIO_FN(VIO_D2),	GPIO_FN(VIO_D3),	GPIO_FN(VIO_D4),
+	GPIO_FN(VIO_D5),	GPIO_FN(VIO_D6),	GPIO_FN(VIO_D7),
+	GPIO_FN(VIO_D8),	GPIO_FN(VIO_D9),	GPIO_FN(VIO_D10),
+	GPIO_FN(VIO_D11),	GPIO_FN(VIO_D12),	GPIO_FN(VIO_D13),
+	GPIO_FN(VIO_D14),	GPIO_FN(VIO_D15),
+
+	/* USB0 */
+	GPIO_FN(IDIN_0),	GPIO_FN(EXTLP_0),	GPIO_FN(OVCN2_0),
+	GPIO_FN(PWEN_0),	GPIO_FN(OVCN_0),	GPIO_FN(VBUS0_0),
+
+	/* USB1 */
+	GPIO_FN(IDIN_1_18),	GPIO_FN(IDIN_1_113),
+	GPIO_FN(OVCN_1_114),	GPIO_FN(OVCN_1_162),
+	GPIO_FN(PWEN_1_115),	GPIO_FN(PWEN_1_138),
+	GPIO_FN(EXTLP_1),	GPIO_FN(OVCN2_1),
+	GPIO_FN(VBUS0_1),
+
+	/* GPIO */
+	GPIO_FN(GPI0),	GPIO_FN(GPI1),	GPIO_FN(GPO0),	GPIO_FN(GPO1),
+
+	/* BSC */
+	GPIO_FN(BS),	GPIO_FN(WE1),	GPIO_FN(CKO),
+	GPIO_FN(WAIT),	GPIO_FN(RDWR),
+
+	GPIO_FN(A0),	GPIO_FN(A1),	GPIO_FN(A2),
+	GPIO_FN(A3),	GPIO_FN(A6),	GPIO_FN(A7),
+	GPIO_FN(A8),	GPIO_FN(A9),	GPIO_FN(A10),
+	GPIO_FN(A11),	GPIO_FN(A12),	GPIO_FN(A13),
+	GPIO_FN(A14),	GPIO_FN(A15),	GPIO_FN(A16),
+	GPIO_FN(A17),	GPIO_FN(A18),	GPIO_FN(A19),
+	GPIO_FN(A20),	GPIO_FN(A21),	GPIO_FN(A22),
+	GPIO_FN(A23),	GPIO_FN(A24),	GPIO_FN(A25),
+	GPIO_FN(A26),
+
+	GPIO_FN(CS0),	GPIO_FN(CS2),	GPIO_FN(CS4),
+	GPIO_FN(CS5A),	GPIO_FN(CS5B),	GPIO_FN(CS6A),
+
+	/* BSC/FLCTL */
+	GPIO_FN(RD_FSC),	GPIO_FN(WE0_FWE),	GPIO_FN(A4_FOE),
+	GPIO_FN(A5_FCDE),	GPIO_FN(D0_NAF0),	GPIO_FN(D1_NAF1),
+	GPIO_FN(D2_NAF2),	GPIO_FN(D3_NAF3),	GPIO_FN(D4_NAF4),
+	GPIO_FN(D5_NAF5),	GPIO_FN(D6_NAF6),	GPIO_FN(D7_NAF7),
+	GPIO_FN(D8_NAF8),	GPIO_FN(D9_NAF9),	GPIO_FN(D10_NAF10),
+	GPIO_FN(D11_NAF11),	GPIO_FN(D12_NAF12),	GPIO_FN(D13_NAF13),
+	GPIO_FN(D14_NAF14),	GPIO_FN(D15_NAF15),
+
+	/* MMCIF(1) */
+	GPIO_FN(MMCD0_0),	GPIO_FN(MMCD0_1),	GPIO_FN(MMCD0_2),
+	GPIO_FN(MMCD0_3),	GPIO_FN(MMCD0_4),	GPIO_FN(MMCD0_5),
+	GPIO_FN(MMCD0_6),	GPIO_FN(MMCD0_7),	GPIO_FN(MMCCMD0),
+	GPIO_FN(MMCCLK0),
+
+	/* MMCIF(2) */
+	GPIO_FN(MMCD1_0),	GPIO_FN(MMCD1_1),	GPIO_FN(MMCD1_2),
+	GPIO_FN(MMCD1_3),	GPIO_FN(MMCD1_4),	GPIO_FN(MMCD1_5),
+	GPIO_FN(MMCD1_6),	GPIO_FN(MMCD1_7),	GPIO_FN(MMCCLK1),
+	GPIO_FN(MMCCMD1),
+
+	/* SPU2 */
+	GPIO_FN(VINT_I),
+
+	/* FLCTL */
+	GPIO_FN(FCE1),	GPIO_FN(FCE0),	GPIO_FN(FRB),
+
+	/* HSI */
+	GPIO_FN(GP_RX_FLAG),	GPIO_FN(GP_RX_DATA),	GPIO_FN(GP_TX_READY),
+	GPIO_FN(GP_RX_WAKE),	GPIO_FN(MP_TX_FLAG),	GPIO_FN(MP_TX_DATA),
+	GPIO_FN(MP_RX_READY),	GPIO_FN(MP_TX_WAKE),
+
+	/* MFI */
+	GPIO_FN(MFIv6),
+	GPIO_FN(MFIv4),
+
+	GPIO_FN(MEMC_BUSCLK_MEMC_A0),	GPIO_FN(MEMC_ADV_MEMC_DREQ0),
+	GPIO_FN(MEMC_WAIT_MEMC_DREQ1),	GPIO_FN(MEMC_CS1_MEMC_A1),
+	GPIO_FN(MEMC_CS0),	GPIO_FN(MEMC_NOE),
+	GPIO_FN(MEMC_NWE),	GPIO_FN(MEMC_INT),
+
+	GPIO_FN(MEMC_AD0),	GPIO_FN(MEMC_AD1),	GPIO_FN(MEMC_AD2),
+	GPIO_FN(MEMC_AD3),	GPIO_FN(MEMC_AD4),	GPIO_FN(MEMC_AD5),
+	GPIO_FN(MEMC_AD6),	GPIO_FN(MEMC_AD7),	GPIO_FN(MEMC_AD8),
+	GPIO_FN(MEMC_AD9),	GPIO_FN(MEMC_AD10),	GPIO_FN(MEMC_AD11),
+	GPIO_FN(MEMC_AD12),	GPIO_FN(MEMC_AD13),	GPIO_FN(MEMC_AD14),
+	GPIO_FN(MEMC_AD15),
+
+	/* SIM */
+	GPIO_FN(SIM_RST),	GPIO_FN(SIM_CLK),	GPIO_FN(SIM_D),
+
+	/* TPU */
+	GPIO_FN(TPU0TO0),	GPIO_FN(TPU0TO1),	GPIO_FN(TPU0TO2_93),
+	GPIO_FN(TPU0TO2_99),	GPIO_FN(TPU0TO3),
+
+	/* I2C2 */
+	GPIO_FN(I2C_SCL2),	GPIO_FN(I2C_SDA2),
+
+	/* I2C3(1) */
+	GPIO_FN(I2C_SCL3),	GPIO_FN(I2C_SDA3),
+
+	/* I2C3(2) */
+	GPIO_FN(I2C_SCL3S),	GPIO_FN(I2C_SDA3S),
+
+	/* I2C4(2) */
+	GPIO_FN(I2C_SCL4),	GPIO_FN(I2C_SDA4),
+
+	/* I2C4(2) */
+	GPIO_FN(I2C_SCL4S),	GPIO_FN(I2C_SDA4S),
+
+	/* KEYSC */
+	GPIO_FN(KEYOUT0),	GPIO_FN(KEYIN0_121),	GPIO_FN(KEYIN0_136),
+	GPIO_FN(KEYOUT1),	GPIO_FN(KEYIN1_122),	GPIO_FN(KEYIN1_135),
+	GPIO_FN(KEYOUT2),	GPIO_FN(KEYIN2_123),	GPIO_FN(KEYIN2_134),
+	GPIO_FN(KEYOUT3),	GPIO_FN(KEYIN3_124),	GPIO_FN(KEYIN3_133),
+	GPIO_FN(KEYOUT4),	GPIO_FN(KEYIN4),	GPIO_FN(KEYOUT5),
+	GPIO_FN(KEYIN5),	GPIO_FN(KEYOUT6),	GPIO_FN(KEYIN6),
+	GPIO_FN(KEYOUT7),	GPIO_FN(KEYIN7),
+
+	/* LCDC */
+	GPIO_FN(LCDHSYN),	GPIO_FN(LCDCS),	GPIO_FN(LCDVSYN),
+	GPIO_FN(LCDDCK),	GPIO_FN(LCDWR),	GPIO_FN(LCDRD),
+	GPIO_FN(LCDDISP),	GPIO_FN(LCDRS),	GPIO_FN(LCDLCLK),
+	GPIO_FN(LCDDON),
+
+	GPIO_FN(LCDD0),		GPIO_FN(LCDD1),		GPIO_FN(LCDD2),
+	GPIO_FN(LCDD3),		GPIO_FN(LCDD4),		GPIO_FN(LCDD5),
+	GPIO_FN(LCDD6),		GPIO_FN(LCDD7),		GPIO_FN(LCDD8),
+	GPIO_FN(LCDD9),		GPIO_FN(LCDD10),	GPIO_FN(LCDD11),
+	GPIO_FN(LCDD12),	GPIO_FN(LCDD13),	GPIO_FN(LCDD14),
+	GPIO_FN(LCDD15),	GPIO_FN(LCDD16),	GPIO_FN(LCDD17),
+	GPIO_FN(LCDD18),	GPIO_FN(LCDD19),	GPIO_FN(LCDD20),
+	GPIO_FN(LCDD21),	GPIO_FN(LCDD22),	GPIO_FN(LCDD23),
+
+	/* IRDA */
+	GPIO_FN(IRDA_OUT),	GPIO_FN(IRDA_IN),	GPIO_FN(IRDA_FIRSEL),
+	GPIO_FN(IROUT_139),	GPIO_FN(IROUT_140),
+
+	/* TSIF1 */
+	GPIO_FN(TS0_1SELECT),
+	GPIO_FN(TS0_2SELECT),
+	GPIO_FN(TS1_1SELECT),
+	GPIO_FN(TS1_2SELECT),
+
+	GPIO_FN(TS_SPSYNC1),	GPIO_FN(TS_SDAT1),
+	GPIO_FN(TS_SDEN1),	GPIO_FN(TS_SCK1),
+
+	/* TSIF2 */
+	GPIO_FN(TS_SPSYNC2),	GPIO_FN(TS_SDAT2),
+	GPIO_FN(TS_SDEN2),	GPIO_FN(TS_SCK2),
+
+	/* HDMI */
+	GPIO_FN(HDMI_HPD),	GPIO_FN(HDMI_CEC),
+
+	/* SDHI0 */
+	GPIO_FN(SDHICLK0),	GPIO_FN(SDHICD0),	GPIO_FN(SDHICMD0),
+	GPIO_FN(SDHIWP0),	GPIO_FN(SDHID0_0),	GPIO_FN(SDHID0_1),
+	GPIO_FN(SDHID0_2),	GPIO_FN(SDHID0_3),
+
+	/* SDHI1 */
+	GPIO_FN(SDHICLK1),	GPIO_FN(SDHICMD1),	GPIO_FN(SDHID1_0),
+	GPIO_FN(SDHID1_1),	GPIO_FN(SDHID1_2),	GPIO_FN(SDHID1_3),
+
+	/* SDHI2 */
+	GPIO_FN(SDHICLK2),	GPIO_FN(SDHICMD2),	GPIO_FN(SDHID2_0),
+	GPIO_FN(SDHID2_1),	GPIO_FN(SDHID2_2),	GPIO_FN(SDHID2_3),
+
+	/* SDENC */
+	GPIO_FN(SDENC_CPG),
+	GPIO_FN(SDENC_DV_CLKI),
+};
+
+/* helper for top 4 bits in PORTnCR */
+#define PCRH(in, in_pd, in_pu, out)		\
+	0, (out), (in), 0,			\
+	0, 0, 0, 0,				\
+	0, 0, (in_pd), 0,			\
+	0, 0, (in_pu), 0
+
+#define PORTCR(nr, reg)						\
+	{ PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) {		\
+		PCRH(PORT##nr##_IN, PORT##nr##_IN_PD,		\
+		     PORT##nr##_IN_PU, PORT##nr##_OUT),		\
+		PORT##nr##_FN0, PORT##nr##_FN1, PORT##nr##_FN2,	\
+		PORT##nr##_FN3,	PORT##nr##_FN4, PORT##nr##_FN5,	\
+		PORT##nr##_FN6, PORT##nr##_FN7 }		\
+	}
+
+static struct pinmux_cfg_reg pinmux_config_regs[] = {
+	PORTCR(0,	0xE6051000), /* PORT0CR */
+	PORTCR(1,	0xE6051001), /* PORT1CR */
+	PORTCR(2,	0xE6051002), /* PORT2CR */
+	PORTCR(3,	0xE6051003), /* PORT3CR */
+	PORTCR(4,	0xE6051004), /* PORT4CR */
+	PORTCR(5,	0xE6051005), /* PORT5CR */
+	PORTCR(6,	0xE6051006), /* PORT6CR */
+	PORTCR(7,	0xE6051007), /* PORT7CR */
+	PORTCR(8,	0xE6051008), /* PORT8CR */
+	PORTCR(9,	0xE6051009), /* PORT9CR */
+	PORTCR(10,	0xE605100A), /* PORT10CR */
+	PORTCR(11,	0xE605100B), /* PORT11CR */
+	PORTCR(12,	0xE605100C), /* PORT12CR */
+	PORTCR(13,	0xE605100D), /* PORT13CR */
+	PORTCR(14,	0xE605100E), /* PORT14CR */
+	PORTCR(15,	0xE605100F), /* PORT15CR */
+	PORTCR(16,	0xE6051010), /* PORT16CR */
+	PORTCR(17,	0xE6051011), /* PORT17CR */
+	PORTCR(18,	0xE6051012), /* PORT18CR */
+	PORTCR(19,	0xE6051013), /* PORT19CR */
+	PORTCR(20,	0xE6051014), /* PORT20CR */
+	PORTCR(21,	0xE6051015), /* PORT21CR */
+	PORTCR(22,	0xE6051016), /* PORT22CR */
+	PORTCR(23,	0xE6051017), /* PORT23CR */
+	PORTCR(24,	0xE6051018), /* PORT24CR */
+	PORTCR(25,	0xE6051019), /* PORT25CR */
+	PORTCR(26,	0xE605101A), /* PORT26CR */
+	PORTCR(27,	0xE605101B), /* PORT27CR */
+	PORTCR(28,	0xE605101C), /* PORT28CR */
+	PORTCR(29,	0xE605101D), /* PORT29CR */
+	PORTCR(30,	0xE605101E), /* PORT30CR */
+	PORTCR(31,	0xE605101F), /* PORT31CR */
+	PORTCR(32,	0xE6051020), /* PORT32CR */
+	PORTCR(33,	0xE6051021), /* PORT33CR */
+	PORTCR(34,	0xE6051022), /* PORT34CR */
+	PORTCR(35,	0xE6051023), /* PORT35CR */
+	PORTCR(36,	0xE6051024), /* PORT36CR */
+	PORTCR(37,	0xE6051025), /* PORT37CR */
+	PORTCR(38,	0xE6051026), /* PORT38CR */
+	PORTCR(39,	0xE6051027), /* PORT39CR */
+	PORTCR(40,	0xE6051028), /* PORT40CR */
+	PORTCR(41,	0xE6051029), /* PORT41CR */
+	PORTCR(42,	0xE605102A), /* PORT42CR */
+	PORTCR(43,	0xE605102B), /* PORT43CR */
+	PORTCR(44,	0xE605102C), /* PORT44CR */
+	PORTCR(45,	0xE605102D), /* PORT45CR */
+	PORTCR(46,	0xE605202E), /* PORT46CR */
+	PORTCR(47,	0xE605202F), /* PORT47CR */
+	PORTCR(48,	0xE6052030), /* PORT48CR */
+	PORTCR(49,	0xE6052031), /* PORT49CR */
+	PORTCR(50,	0xE6052032), /* PORT50CR */
+	PORTCR(51,	0xE6052033), /* PORT51CR */
+	PORTCR(52,	0xE6052034), /* PORT52CR */
+	PORTCR(53,	0xE6052035), /* PORT53CR */
+	PORTCR(54,	0xE6052036), /* PORT54CR */
+	PORTCR(55,	0xE6052037), /* PORT55CR */
+	PORTCR(56,	0xE6052038), /* PORT56CR */
+	PORTCR(57,	0xE6052039), /* PORT57CR */
+	PORTCR(58,	0xE605203A), /* PORT58CR */
+	PORTCR(59,	0xE605203B), /* PORT59CR */
+	PORTCR(60,	0xE605203C), /* PORT60CR */
+	PORTCR(61,	0xE605203D), /* PORT61CR */
+	PORTCR(62,	0xE605203E), /* PORT62CR */
+	PORTCR(63,	0xE605203F), /* PORT63CR */
+	PORTCR(64,	0xE6052040), /* PORT64CR */
+	PORTCR(65,	0xE6052041), /* PORT65CR */
+	PORTCR(66,	0xE6052042), /* PORT66CR */
+	PORTCR(67,	0xE6052043), /* PORT67CR */
+	PORTCR(68,	0xE6052044), /* PORT68CR */
+	PORTCR(69,	0xE6052045), /* PORT69CR */
+	PORTCR(70,	0xE6052046), /* PORT70CR */
+	PORTCR(71,	0xE6052047), /* PORT71CR */
+	PORTCR(72,	0xE6052048), /* PORT72CR */
+	PORTCR(73,	0xE6052049), /* PORT73CR */
+	PORTCR(74,	0xE605204A), /* PORT74CR */
+	PORTCR(75,	0xE605204B), /* PORT75CR */
+	PORTCR(76,	0xE605004C), /* PORT76CR */
+	PORTCR(77,	0xE605004D), /* PORT77CR */
+	PORTCR(78,	0xE605004E), /* PORT78CR */
+	PORTCR(79,	0xE605004F), /* PORT79CR */
+	PORTCR(80,	0xE6050050), /* PORT80CR */
+	PORTCR(81,	0xE6050051), /* PORT81CR */
+	PORTCR(82,	0xE6050052), /* PORT82CR */
+	PORTCR(83,	0xE6050053), /* PORT83CR */
+	PORTCR(84,	0xE6050054), /* PORT84CR */
+	PORTCR(85,	0xE6050055), /* PORT85CR */
+	PORTCR(86,	0xE6050056), /* PORT86CR */
+	PORTCR(87,	0xE6050057), /* PORT87CR */
+	PORTCR(88,	0xE6050058), /* PORT88CR */
+	PORTCR(89,	0xE6050059), /* PORT89CR */
+	PORTCR(90,	0xE605005A), /* PORT90CR */
+	PORTCR(91,	0xE605005B), /* PORT91CR */
+	PORTCR(92,	0xE605005C), /* PORT92CR */
+	PORTCR(93,	0xE605005D), /* PORT93CR */
+	PORTCR(94,	0xE605005E), /* PORT94CR */
+	PORTCR(95,	0xE605005F), /* PORT95CR */
+	PORTCR(96,	0xE6050060), /* PORT96CR */
+	PORTCR(97,	0xE6050061), /* PORT97CR */
+	PORTCR(98,	0xE6050062), /* PORT98CR */
+	PORTCR(99,	0xE6050063), /* PORT99CR */
+	PORTCR(100,	0xE6053064), /* PORT100CR */
+	PORTCR(101,	0xE6053065), /* PORT101CR */
+	PORTCR(102,	0xE6053066), /* PORT102CR */
+	PORTCR(103,	0xE6053067), /* PORT103CR */
+	PORTCR(104,	0xE6053068), /* PORT104CR */
+	PORTCR(105,	0xE6053069), /* PORT105CR */
+	PORTCR(106,	0xE605306A), /* PORT106CR */
+	PORTCR(107,	0xE605306B), /* PORT107CR */
+	PORTCR(108,	0xE605306C), /* PORT108CR */
+	PORTCR(109,	0xE605306D), /* PORT109CR */
+	PORTCR(110,	0xE605306E), /* PORT110CR */
+	PORTCR(111,	0xE605306F), /* PORT111CR */
+	PORTCR(112,	0xE6053070), /* PORT112CR */
+	PORTCR(113,	0xE6053071), /* PORT113CR */
+	PORTCR(114,	0xE6053072), /* PORT114CR */
+	PORTCR(115,	0xE6053073), /* PORT115CR */
+	PORTCR(116,	0xE6053074), /* PORT116CR */
+	PORTCR(117,	0xE6053075), /* PORT117CR */
+	PORTCR(118,	0xE6053076), /* PORT118CR */
+	PORTCR(119,	0xE6053077), /* PORT119CR */
+	PORTCR(120,	0xE6053078), /* PORT120CR */
+	PORTCR(121,	0xE6050079), /* PORT121CR */
+	PORTCR(122,	0xE605007A), /* PORT122CR */
+	PORTCR(123,	0xE605007B), /* PORT123CR */
+	PORTCR(124,	0xE605007C), /* PORT124CR */
+	PORTCR(125,	0xE605007D), /* PORT125CR */
+	PORTCR(126,	0xE605007E), /* PORT126CR */
+	PORTCR(127,	0xE605007F), /* PORT127CR */
+	PORTCR(128,	0xE6050080), /* PORT128CR */
+	PORTCR(129,	0xE6050081), /* PORT129CR */
+	PORTCR(130,	0xE6050082), /* PORT130CR */
+	PORTCR(131,	0xE6050083), /* PORT131CR */
+	PORTCR(132,	0xE6050084), /* PORT132CR */
+	PORTCR(133,	0xE6050085), /* PORT133CR */
+	PORTCR(134,	0xE6050086), /* PORT134CR */
+	PORTCR(135,	0xE6050087), /* PORT135CR */
+	PORTCR(136,	0xE6050088), /* PORT136CR */
+	PORTCR(137,	0xE6050089), /* PORT137CR */
+	PORTCR(138,	0xE605008A), /* PORT138CR */
+	PORTCR(139,	0xE605008B), /* PORT139CR */
+	PORTCR(140,	0xE605008C), /* PORT140CR */
+	PORTCR(141,	0xE605008D), /* PORT141CR */
+	PORTCR(142,	0xE605008E), /* PORT142CR */
+	PORTCR(143,	0xE605008F), /* PORT143CR */
+	PORTCR(144,	0xE6050090), /* PORT144CR */
+	PORTCR(145,	0xE6050091), /* PORT145CR */
+	PORTCR(146,	0xE6050092), /* PORT146CR */
+	PORTCR(147,	0xE6050093), /* PORT147CR */
+	PORTCR(148,	0xE6050094), /* PORT148CR */
+	PORTCR(149,	0xE6050095), /* PORT149CR */
+	PORTCR(150,	0xE6050096), /* PORT150CR */
+	PORTCR(151,	0xE6050097), /* PORT151CR */
+	PORTCR(152,	0xE6053098), /* PORT152CR */
+	PORTCR(153,	0xE6053099), /* PORT153CR */
+	PORTCR(154,	0xE605309A), /* PORT154CR */
+	PORTCR(155,	0xE605309B), /* PORT155CR */
+	PORTCR(156,	0xE605009C), /* PORT156CR */
+	PORTCR(157,	0xE605009D), /* PORT157CR */
+	PORTCR(158,	0xE605009E), /* PORT158CR */
+	PORTCR(159,	0xE605009F), /* PORT159CR */
+	PORTCR(160,	0xE60500A0), /* PORT160CR */
+	PORTCR(161,	0xE60500A1), /* PORT161CR */
+	PORTCR(162,	0xE60500A2), /* PORT162CR */
+	PORTCR(163,	0xE60500A3), /* PORT163CR */
+	PORTCR(164,	0xE60500A4), /* PORT164CR */
+	PORTCR(165,	0xE60500A5), /* PORT165CR */
+	PORTCR(166,	0xE60500A6), /* PORT166CR */
+	PORTCR(167,	0xE60520A7), /* PORT167CR */
+	PORTCR(168,	0xE60520A8), /* PORT168CR */
+	PORTCR(169,	0xE60520A9), /* PORT169CR */
+	PORTCR(170,	0xE60520AA), /* PORT170CR */
+	PORTCR(171,	0xE60520AB), /* PORT171CR */
+	PORTCR(172,	0xE60520AC), /* PORT172CR */
+	PORTCR(173,	0xE60520AD), /* PORT173CR */
+	PORTCR(174,	0xE60520AE), /* PORT174CR */
+	PORTCR(175,	0xE60520AF), /* PORT175CR */
+	PORTCR(176,	0xE60520B0), /* PORT176CR */
+	PORTCR(177,	0xE60520B1), /* PORT177CR */
+	PORTCR(178,	0xE60520B2), /* PORT178CR */
+	PORTCR(179,	0xE60520B3), /* PORT179CR */
+	PORTCR(180,	0xE60520B4), /* PORT180CR */
+	PORTCR(181,	0xE60520B5), /* PORT181CR */
+	PORTCR(182,	0xE60520B6), /* PORT182CR */
+	PORTCR(183,	0xE60520B7), /* PORT183CR */
+	PORTCR(184,	0xE60520B8), /* PORT184CR */
+	PORTCR(185,	0xE60520B9), /* PORT185CR */
+	PORTCR(186,	0xE60520BA), /* PORT186CR */
+	PORTCR(187,	0xE60520BB), /* PORT187CR */
+	PORTCR(188,	0xE60520BC), /* PORT188CR */
+	PORTCR(189,	0xE60520BD), /* PORT189CR */
+	PORTCR(190,	0xE60520BE), /* PORT190CR */
+
+	{ PINMUX_CFG_REG("MSEL1CR", 0xE605800C, 32, 1) {
+			MSEL1CR_31_0,	MSEL1CR_31_1,
+			MSEL1CR_30_0,	MSEL1CR_30_1,
+			MSEL1CR_29_0,	MSEL1CR_29_1,
+			MSEL1CR_28_0,	MSEL1CR_28_1,
+			MSEL1CR_27_0,	MSEL1CR_27_1,
+			MSEL1CR_26_0,	MSEL1CR_26_1,
+			0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+			0, 0, 0, 0, 0, 0, 0, 0,
+			MSEL1CR_16_0,	MSEL1CR_16_1,
+			MSEL1CR_15_0,	MSEL1CR_15_1,
+			MSEL1CR_14_0,	MSEL1CR_14_1,
+			MSEL1CR_13_0,	MSEL1CR_13_1,
+			MSEL1CR_12_0,	MSEL1CR_12_1,
+			0, 0, 0, 0,
+			MSEL1CR_9_0,	MSEL1CR_9_1,
+			MSEL1CR_8_0,	MSEL1CR_8_1,
+			MSEL1CR_7_0,	MSEL1CR_7_1,
+			MSEL1CR_6_0,	MSEL1CR_6_1,
+			0, 0,
+			MSEL1CR_4_0,	MSEL1CR_4_1,
+			MSEL1CR_3_0,	MSEL1CR_3_1,
+			MSEL1CR_2_0,	MSEL1CR_2_1,
+			0, 0,
+			MSEL1CR_0_0,	MSEL1CR_0_1,
+		}
+	},
+	{ PINMUX_CFG_REG("MSEL3CR", 0xE6058020, 32, 1) {
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			MSEL3CR_27_0,	MSEL3CR_27_1,
+			MSEL3CR_26_0,	MSEL3CR_26_1,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			MSEL3CR_21_0,	MSEL3CR_21_1,
+			MSEL3CR_20_0,	MSEL3CR_20_1,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			MSEL3CR_15_0,	MSEL3CR_15_1,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0,
+			MSEL3CR_9_0,	MSEL3CR_9_1,
+			0, 0, 0, 0,
+			MSEL3CR_6_0,	MSEL3CR_6_1,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			}
+	},
+	{ PINMUX_CFG_REG("MSEL4CR", 0xE6058024, 32, 1) {
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			MSEL4CR_19_0,	MSEL4CR_19_1,
+			MSEL4CR_18_0,	MSEL4CR_18_1,
+			MSEL4CR_17_0,	MSEL4CR_17_1,
+			MSEL4CR_16_0,	MSEL4CR_16_1,
+			MSEL4CR_15_0,	MSEL4CR_15_1,
+			MSEL4CR_14_0,	MSEL4CR_14_1,
+			0, 0, 0, 0,
+			0, 0,
+			MSEL4CR_10_0,	MSEL4CR_10_1,
+			0, 0, 0, 0,
+			0, 0,
+			MSEL4CR_6_0,	MSEL4CR_6_1,
+			0, 0,
+			MSEL4CR_4_0,	MSEL4CR_4_1,
+			0, 0, 0, 0,
+			MSEL4CR_1_0,	MSEL4CR_1_1,
+			0, 0,
+		}
+	},
+	{ },
+};
+
+static struct pinmux_data_reg pinmux_data_regs[] = {
+	{ PINMUX_DATA_REG("PORTL095_064DR", 0xE6054008, 32) {
+			PORT95_DATA, PORT94_DATA, PORT93_DATA, PORT92_DATA,
+			PORT91_DATA, PORT90_DATA, PORT89_DATA, PORT88_DATA,
+			PORT87_DATA, PORT86_DATA, PORT85_DATA, PORT84_DATA,
+			PORT83_DATA, PORT82_DATA, PORT81_DATA, PORT80_DATA,
+			PORT79_DATA, PORT78_DATA, PORT77_DATA, PORT76_DATA,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+		}
+	},
+	{ PINMUX_DATA_REG("PORTL127_096DR", 0xE605400C, 32) {
+			PORT127_DATA, PORT126_DATA, PORT125_DATA, PORT124_DATA,
+			PORT123_DATA, PORT122_DATA, PORT121_DATA, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			PORT99_DATA,  PORT98_DATA,  PORT97_DATA,  PORT96_DATA,
+		}
+	},
+	{ PINMUX_DATA_REG("PORTL159_128DR", 0xE6054010, 32) {
+			PORT159_DATA, PORT158_DATA, PORT157_DATA, PORT156_DATA,
+			0, 0, 0, 0,
+			PORT151_DATA, PORT150_DATA, PORT149_DATA, PORT148_DATA,
+			PORT147_DATA, PORT146_DATA, PORT145_DATA, PORT144_DATA,
+			PORT143_DATA, PORT142_DATA, PORT141_DATA, PORT140_DATA,
+			PORT139_DATA, PORT138_DATA, PORT137_DATA, PORT136_DATA,
+			PORT135_DATA, PORT134_DATA, PORT133_DATA, PORT132_DATA,
+			PORT131_DATA, PORT130_DATA, PORT129_DATA, PORT128_DATA,
+		}
+	},
+	{ PINMUX_DATA_REG("PORTL191_160DR", 0xE6054014, 32) {
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0,	      PORT166_DATA, PORT165_DATA, PORT164_DATA,
+			PORT163_DATA, PORT162_DATA, PORT161_DATA, PORT160_DATA,
+		}
+	},
+	{ PINMUX_DATA_REG("PORTD031_000DR", 0xE6055000, 32) {
+			PORT31_DATA, PORT30_DATA, PORT29_DATA, PORT28_DATA,
+			PORT27_DATA, PORT26_DATA, PORT25_DATA, PORT24_DATA,
+			PORT23_DATA, PORT22_DATA, PORT21_DATA, PORT20_DATA,
+			PORT19_DATA, PORT18_DATA, PORT17_DATA, PORT16_DATA,
+			PORT15_DATA, PORT14_DATA, PORT13_DATA, PORT12_DATA,
+			PORT11_DATA, PORT10_DATA, PORT9_DATA,  PORT8_DATA,
+			PORT7_DATA,  PORT6_DATA,  PORT5_DATA,  PORT4_DATA,
+			PORT3_DATA,  PORT2_DATA,  PORT1_DATA,  PORT0_DATA,
+		}
+	},
+	{ PINMUX_DATA_REG("PORTD063_032DR", 0xE6055004, 32) {
+			0, 0, 0, 0, 0, 0, 0, 0,
+			0, 0, 0, 0, 0, 0, 0, 0,
+			0,           0,           PORT45_DATA, PORT44_DATA,
+			PORT43_DATA, PORT42_DATA, PORT41_DATA, PORT40_DATA,
+			PORT39_DATA, PORT38_DATA, PORT37_DATA, PORT36_DATA,
+			PORT35_DATA, PORT34_DATA, PORT33_DATA, PORT32_DATA,
+		}
+	},
+	{ PINMUX_DATA_REG("PORTR063_032DR", 0xE6056004, 32) {
+			PORT63_DATA, PORT62_DATA, PORT61_DATA, PORT60_DATA,
+			PORT59_DATA, PORT58_DATA, PORT57_DATA, PORT56_DATA,
+			PORT55_DATA, PORT54_DATA, PORT53_DATA, PORT52_DATA,
+			PORT51_DATA, PORT50_DATA, PORT49_DATA, PORT48_DATA,
+			PORT47_DATA, PORT46_DATA, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+		}
+	},
+	{ PINMUX_DATA_REG("PORTR095_064DR", 0xE6056008, 32) {
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			PORT75_DATA, PORT74_DATA, PORT73_DATA, PORT72_DATA,
+			PORT71_DATA, PORT70_DATA, PORT69_DATA, PORT68_DATA,
+			PORT67_DATA, PORT66_DATA, PORT65_DATA, PORT64_DATA,
+		}
+	},
+	{ PINMUX_DATA_REG("PORTR191_160DR", 0xE6056014, 32) {
+			0,	      PORT190_DATA, PORT189_DATA, PORT188_DATA,
+			PORT187_DATA, PORT186_DATA, PORT185_DATA, PORT184_DATA,
+			PORT183_DATA, PORT182_DATA, PORT181_DATA, PORT180_DATA,
+			PORT179_DATA, PORT178_DATA, PORT177_DATA, PORT176_DATA,
+			PORT175_DATA, PORT174_DATA, PORT173_DATA, PORT172_DATA,
+			PORT171_DATA, PORT170_DATA, PORT169_DATA, PORT168_DATA,
+			PORT167_DATA, 0, 0, 0,
+			0, 0, 0, 0,
+		}
+	},
+	{ PINMUX_DATA_REG("PORTU127_096DR", 0xE605700C, 32) {
+			0, 0, 0, 0,
+			0, 0, 0, PORT120_DATA,
+			PORT119_DATA, PORT118_DATA, PORT117_DATA, PORT116_DATA,
+			PORT115_DATA, PORT114_DATA, PORT113_DATA, PORT112_DATA,
+			PORT111_DATA, PORT110_DATA, PORT109_DATA, PORT108_DATA,
+			PORT107_DATA, PORT106_DATA, PORT105_DATA, PORT104_DATA,
+			PORT103_DATA, PORT102_DATA, PORT101_DATA, PORT100_DATA,
+			0, 0, 0, 0,
+		}
+	},
+	{ PINMUX_DATA_REG("PORTU159_128DR", 0xE6057010, 32) {
+			0, 0, 0, 0,
+			PORT155_DATA, PORT154_DATA, PORT153_DATA, PORT152_DATA,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+		}
+	},
+	{ },
+};
+
+static struct pinmux_info sh7372_pinmux_info = {
+	.name = "sh7372_pfc",
+	.reserved_id = PINMUX_RESERVED,
+	.data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END },
+	.input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
+	.input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END },
+	.input_pd = { PINMUX_INPUT_PULLDOWN_BEGIN, PINMUX_INPUT_PULLDOWN_END },
+	.output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
+	.mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END },
+	.function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
+
+	.first_gpio = GPIO_PORT0,
+	.last_gpio = GPIO_FN_SDENC_DV_CLKI,
+
+	.gpios = pinmux_gpios,
+	.cfg_regs = pinmux_config_regs,
+	.data_regs = pinmux_data_regs,
+
+	.gpio_data = pinmux_data,
+	.gpio_data_size = ARRAY_SIZE(pinmux_data),
+};
+
+void sh7372_pinmux_init(void)
+{
+	register_pinmux(&sh7372_pinmux_info);
+}
diff --git a/arch/arm/mach-shmobile/pfc-sh7377.c b/arch/arm/mach-shmobile/pfc-sh7377.c
new file mode 100644
index 000000000000..613e6842ad05
--- /dev/null
+++ b/arch/arm/mach-shmobile/pfc-sh7377.c
@@ -0,0 +1,1767 @@
+/*
+ * sh7377 processor support - PFC hardware block
+ *
+ * Copyright (C) 2010  NISHIMOTO Hiroki
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <mach/sh7377.h>
+
+#define _1(fn, pfx, sfx) fn(pfx, sfx)
+
+#define _10(fn, pfx, sfx)				\
+	_1(fn, pfx##0, sfx), _1(fn, pfx##1, sfx),	\
+	_1(fn, pfx##2, sfx), _1(fn, pfx##3, sfx),	\
+	_1(fn, pfx##4, sfx), _1(fn, pfx##5, sfx),	\
+	_1(fn, pfx##6, sfx), _1(fn, pfx##7, sfx),	\
+	_1(fn, pfx##8, sfx), _1(fn, pfx##9, sfx)
+
+#define _90(fn, pfx, sfx)				\
+	_10(fn, pfx##1, sfx), _10(fn, pfx##2, sfx),	\
+	_10(fn, pfx##3, sfx), _10(fn, pfx##4, sfx),	\
+	_10(fn, pfx##5, sfx), _10(fn, pfx##6, sfx),	\
+	_10(fn, pfx##7, sfx), _10(fn, pfx##8, sfx),	\
+	_10(fn, pfx##9, sfx)
+
+#define _265(fn, pfx, sfx)				\
+	_10(fn, pfx, sfx), _90(fn, pfx, sfx),		\
+	_10(fn, pfx##10, sfx),				\
+	_1(fn, pfx##110, sfx), _1(fn, pfx##111, sfx),	\
+	_1(fn, pfx##112, sfx), _1(fn, pfx##113, sfx),	\
+	_1(fn, pfx##114, sfx), _1(fn, pfx##115, sfx),	\
+	_1(fn, pfx##116, sfx), _1(fn, pfx##117, sfx),	\
+	_1(fn, pfx##118, sfx),				\
+	_1(fn, pfx##128, sfx), _1(fn, pfx##129, sfx),	\
+	_10(fn, pfx##13, sfx), _10(fn, pfx##14, sfx),	\
+	_10(fn, pfx##15, sfx),				\
+	_1(fn, pfx##160, sfx), _1(fn, pfx##161, sfx),	\
+	_1(fn, pfx##162, sfx), _1(fn, pfx##163, sfx),	\
+	_1(fn, pfx##164, sfx),				\
+	_1(fn, pfx##192, sfx), _1(fn, pfx##193, sfx),	\
+	_1(fn, pfx##194, sfx), _1(fn, pfx##195, sfx),	\
+	_1(fn, pfx##196, sfx), _1(fn, pfx##197, sfx),	\
+	_1(fn, pfx##198, sfx), _1(fn, pfx##199, sfx),	\
+	_10(fn, pfx##20, sfx), _10(fn, pfx##21, sfx),	\
+	_10(fn, pfx##22, sfx), _10(fn, pfx##23, sfx),	\
+	_10(fn, pfx##24, sfx), _10(fn, pfx##25, sfx),	\
+	_1(fn, pfx##260, sfx), _1(fn, pfx##261, sfx),	\
+	_1(fn, pfx##262, sfx), _1(fn, pfx##263, sfx),	\
+	_1(fn, pfx##264, sfx)
+
+#define _PORT(pfx, sfx) pfx##_##sfx
+#define PORT_265(str) _265(_PORT, PORT, str)
+
+enum {
+	PINMUX_RESERVED = 0,
+
+	PINMUX_DATA_BEGIN,
+	PORT_265(DATA), /* PORT0_DATA -> PORT264_DATA */
+	PINMUX_DATA_END,
+
+	PINMUX_INPUT_BEGIN,
+	PORT_265(IN), /* PORT0_IN -> PORT264_IN */
+	PINMUX_INPUT_END,
+
+	PINMUX_INPUT_PULLUP_BEGIN,
+	PORT_265(IN_PU), /* PORT0_IN_PU -> PORT264_IN_PU */
+	PINMUX_INPUT_PULLUP_END,
+
+	PINMUX_INPUT_PULLDOWN_BEGIN,
+	PORT_265(IN_PD), /* PORT0_IN_PD -> PORT264_IN_PD */
+	PINMUX_INPUT_PULLDOWN_END,
+
+	PINMUX_OUTPUT_BEGIN,
+	PORT_265(OUT), /* PORT0_OUT -> PORT264_OUT */
+	PINMUX_OUTPUT_END,
+
+	PINMUX_FUNCTION_BEGIN,
+	PORT_265(FN_IN), /* PORT0_FN_IN -> PORT264_FN_IN */
+	PORT_265(FN_OUT), /* PORT0_FN_OUT -> PORT264_FN_OUT */
+	PORT_265(FN0), /* PORT0_FN0 -> PORT264_FN0 */
+	PORT_265(FN1), /* PORT0_FN1 -> PORT264_FN1 */
+	PORT_265(FN2), /* PORT0_FN2 -> PORT264_FN2 */
+	PORT_265(FN3), /* PORT0_FN3 -> PORT264_FN3 */
+	PORT_265(FN4), /* PORT0_FN4 -> PORT264_FN4 */
+	PORT_265(FN5), /* PORT0_FN5 -> PORT264_FN5 */
+	PORT_265(FN6), /* PORT0_FN6 -> PORT264_FN6 */
+	PORT_265(FN7), /* PORT0_FN7 -> PORT264_FN7 */
+
+	MSELBCR_MSEL17_1, MSELBCR_MSEL17_0,
+	MSELBCR_MSEL16_1, MSELBCR_MSEL16_0,
+	PINMUX_FUNCTION_END,
+
+	PINMUX_MARK_BEGIN,
+	/* Special Pull-up / Pull-down Functions */
+	PORT66_KEYIN0_PU_MARK, PORT67_KEYIN1_PU_MARK,
+	PORT68_KEYIN2_PU_MARK, PORT69_KEYIN3_PU_MARK,
+	PORT70_KEYIN4_PU_MARK, PORT71_KEYIN5_PU_MARK,
+	PORT72_KEYIN6_PU_MARK,
+
+	/* 55-1 */
+	VBUS_0_MARK,
+	CPORT0_MARK,
+	CPORT1_MARK,
+	CPORT2_MARK,
+	CPORT3_MARK,
+	CPORT4_MARK,
+	CPORT5_MARK,
+	CPORT6_MARK,
+	CPORT7_MARK,
+	CPORT8_MARK,
+	CPORT9_MARK,
+	CPORT10_MARK,
+	CPORT11_MARK, SIN2_MARK,
+	CPORT12_MARK, XCTS2_MARK,
+	CPORT13_MARK, RFSPO4_MARK,
+	CPORT14_MARK, RFSPO5_MARK,
+	CPORT15_MARK, SCIFA0_SCK_MARK, GPS_AGC2_MARK,
+	CPORT16_MARK, SCIFA0_TXD_MARK, GPS_AGC3_MARK,
+	CPORT17_IC_OE_MARK, SOUT2_MARK,
+	CPORT18_MARK, XRTS2_MARK, PORT19_VIO_CKO2_MARK,
+	CPORT19_MPORT1_MARK,
+	CPORT20_MARK, RFSPO6_MARK,
+	CPORT21_MARK, STATUS0_MARK,
+	CPORT22_MARK, STATUS1_MARK,
+	CPORT23_MARK, STATUS2_MARK, RFSPO7_MARK,
+	B_SYNLD1_MARK,
+	B_SYNLD2_MARK, SYSENMSK_MARK,
+	XMAINPS_MARK,
+	XDIVPS_MARK,
+	XIDRST_MARK,
+	IDCLK_MARK, IC_DP_MARK,
+	IDIO_MARK, IC_DM_MARK,
+	SOUT1_MARK, SCIFA4_TXD_MARK, M02_BERDAT_MARK,
+	SIN1_MARK, SCIFA4_RXD_MARK, XWUP_MARK,
+	XRTS1_MARK, SCIFA4_RTS_MARK, M03_BERCLK_MARK,
+	XCTS1_MARK, SCIFA4_CTS_MARK,
+	PCMCLKO_MARK,
+	SYNC8KO_MARK,
+
+	/* 55-2 */
+	DNPCM_A_MARK,
+	UPPCM_A_MARK,
+	VACK_MARK,
+	XTALB1L_MARK,
+	GPS_AGC1_MARK, SCIFA0_RTS_MARK,
+	GPS_AGC4_MARK, SCIFA0_RXD_MARK,
+	GPS_PWRDOWN_MARK, SCIFA0_CTS_MARK,
+	GPS_IM_MARK,
+	GPS_IS_MARK,
+	GPS_QM_MARK,
+	GPS_QS_MARK,
+	FMSOCK_MARK, PORT49_IRDA_OUT_MARK, PORT49_IROUT_MARK,
+	FMSOOLR_MARK, BBIF2_TSYNC2_MARK, TPU2TO2_MARK, IPORT3_MARK,
+	FMSIOLR_MARK,
+	FMSOOBT_MARK, BBIF2_TSCK2_MARK, TPU2TO3_MARK, OPORT1_MARK,
+	FMSIOBT_MARK,
+	FMSOSLD_MARK, BBIF2_TXD2_MARK, OPORT2_MARK,
+	FMSOILR_MARK, PORT53_IRDA_IN_MARK, TPU3TO3_MARK, OPORT3_MARK,
+	FMSIILR_MARK,
+	FMSOIBT_MARK, PORT54_IRDA_FIRSEL_MARK, TPU3TO2_MARK, FMSIIBT_MARK,
+	FMSISLD_MARK, MFG0_OUT1_MARK, TPU0TO0_MARK,
+	A0_EA0_MARK, BS_MARK,
+	A12_EA12_MARK, PORT58_VIO_CKOR_MARK, TPU4TO2_MARK,
+	A13_EA13_MARK, PORT59_IROUT_MARK, MFG0_OUT2_MARK, TPU0TO1_MARK,
+	A14_EA14_MARK, PORT60_KEYOUT5_MARK,
+	A15_EA15_MARK, PORT61_KEYOUT4_MARK,
+	A16_EA16_MARK, PORT62_KEYOUT3_MARK, MSIOF0_SS1_MARK,
+	A17_EA17_MARK, PORT63_KEYOUT2_MARK, MSIOF0_TSYNC_MARK,
+	A18_EA18_MARK, PORT64_KEYOUT1_MARK, MSIOF0_TSCK_MARK,
+	A19_EA19_MARK, PORT65_KEYOUT0_MARK, MSIOF0_TXD_MARK,
+	A20_EA20_MARK, PORT66_KEYIN0_MARK, MSIOF0_RSCK_MARK,
+	A21_EA21_MARK, PORT67_KEYIN1_MARK, MSIOF0_RSYNC_MARK,
+	A22_EA22_MARK, PORT68_KEYIN2_MARK, MSIOF0_MCK0_MARK,
+	A23_EA23_MARK, PORT69_KEYIN3_MARK, MSIOF0_MCK1_MARK,
+	A24_EA24_MARK, PORT70_KEYIN4_MARK, MSIOF0_RXD_MARK,
+	A25_EA25_MARK, PORT71_KEYIN5_MARK, MSIOF0_SS2_MARK,
+	A26_MARK, PORT72_KEYIN6_MARK,
+	D0_ED0_NAF0_MARK,
+	D1_ED1_NAF1_MARK,
+	D2_ED2_NAF2_MARK,
+	D3_ED3_NAF3_MARK,
+	D4_ED4_NAF4_MARK,
+	D5_ED5_NAF5_MARK,
+	D6_ED6_NAF6_MARK,
+	D7_ED7_NAF7_MARK,
+	D8_ED8_NAF8_MARK,
+	D9_ED9_NAF9_MARK,
+	D10_ED10_NAF10_MARK,
+	D11_ED11_NAF11_MARK,
+	D12_ED12_NAF12_MARK,
+	D13_ED13_NAF13_MARK,
+	D14_ED14_NAF14_MARK,
+	D15_ED15_NAF15_MARK,
+	CS4_MARK,
+	CS5A_MARK, FMSICK_MARK,
+	CS5B_MARK, FCE1_MARK,
+
+	/* 55-3 */
+	CS6B_MARK, XCS2_MARK, CS6A_MARK, DACK0_MARK,
+	FCE0_MARK,
+	WAIT_MARK, DREQ0_MARK,
+	RD_XRD_MARK,
+	WE0_XWR0_FWE_MARK,
+	WE1_XWR1_MARK,
+	FRB_MARK,
+	CKO_MARK,
+	NBRSTOUT_MARK,
+	NBRST_MARK,
+	GPS_EPPSIN_MARK,
+	LATCHPULSE_MARK,
+	LTESIGNAL_MARK,
+	LEGACYSTATE_MARK,
+	TCKON_MARK,
+	VIO_VD_MARK, PORT128_KEYOUT0_MARK, IPORT0_MARK,
+	VIO_HD_MARK, PORT129_KEYOUT1_MARK, IPORT1_MARK,
+	VIO_D0_MARK, PORT130_KEYOUT2_MARK, PORT130_MSIOF2_RXD_MARK,
+	VIO_D1_MARK, PORT131_KEYOUT3_MARK, PORT131_MSIOF2_SS1_MARK,
+	VIO_D2_MARK, PORT132_KEYOUT4_MARK, PORT132_MSIOF2_SS2_MARK,
+	VIO_D3_MARK, PORT133_KEYOUT5_MARK, PORT133_MSIOF2_TSYNC_MARK,
+	VIO_D4_MARK, PORT134_KEYIN0_MARK, PORT134_MSIOF2_TXD_MARK,
+	VIO_D5_MARK, PORT135_KEYIN1_MARK, PORT135_MSIOF2_TSCK_MARK,
+	VIO_D6_MARK, PORT136_KEYIN2_MARK,
+	VIO_D7_MARK, PORT137_KEYIN3_MARK,
+	VIO_D8_MARK, M9_SLCD_A01_MARK, PORT138_FSIAOMC_MARK,
+	VIO_D9_MARK, M10_SLCD_CK1_MARK, PORT139_FSIAOLR_MARK,
+	VIO_D10_MARK, M11_SLCD_SO1_MARK, TPU0TO2_MARK, PORT140_FSIAOBT_MARK,
+	VIO_D11_MARK, M12_SLCD_CE1_MARK, TPU0TO3_MARK, PORT141_FSIAOSLD_MARK,
+	VIO_D12_MARK, M13_BSW_MARK, PORT142_FSIACK_MARK,
+	VIO_D13_MARK, M14_GSW_MARK, PORT143_FSIAILR_MARK,
+	VIO_D14_MARK, M15_RSW_MARK, PORT144_FSIAIBT_MARK,
+	VIO_D15_MARK, TPU1TO3_MARK, PORT145_FSIAISLD_MARK,
+	VIO_CLK_MARK, PORT146_KEYIN4_MARK, IPORT2_MARK,
+	VIO_FIELD_MARK, PORT147_KEYIN5_MARK,
+	VIO_CKO_MARK, PORT148_KEYIN6_MARK,
+	A27_MARK, RDWR_XWE_MARK, MFG0_IN1_MARK,
+	MFG0_IN2_MARK,
+	TS_SPSYNC3_MARK, MSIOF2_RSCK_MARK,
+	TS_SDAT3_MARK, MSIOF2_RSYNC_MARK,
+	TPU1TO2_MARK, TS_SDEN3_MARK, PORT153_MSIOF2_SS1_MARK,
+	SOUT3_MARK, SCIFA2_TXD1_MARK, MSIOF2_MCK0_MARK,
+	SIN3_MARK, SCIFA2_RXD1_MARK, MSIOF2_MCK1_MARK,
+	XRTS3_MARK, SCIFA2_RTS1_MARK, PORT156_MSIOF2_SS2_MARK,
+	XCTS3_MARK, SCIFA2_CTS1_MARK, PORT157_MSIOF2_RXD_MARK,
+
+	/* 55-4 */
+	DINT_MARK, SCIFA2_SCK1_MARK, TS_SCK3_MARK,
+	PORT159_SCIFB_SCK_MARK, PORT159_SCIFA5_SCK_MARK, NMI_MARK,
+	PORT160_SCIFB_TXD_MARK, PORT160_SCIFA5_TXD_MARK, SOUT0_MARK,
+	PORT161_SCIFB_CTS_MARK, PORT161_SCIFA5_CTS_MARK, XCTS0_MARK,
+	MFG3_IN2_MARK,
+	PORT162_SCIFB_RXD_MARK, PORT162_SCIFA5_RXD_MARK, SIN0_MARK,
+	MFG3_IN1_MARK,
+	PORT163_SCIFB_RTS_MARK, PORT163_SCIFA5_RTS_MARK, XRTS0_MARK,
+	MFG3_OUT1_MARK, TPU3TO0_MARK,
+	LCDD0_MARK, PORT192_KEYOUT0_MARK, EXT_CKI_MARK,
+	LCDD1_MARK, PORT193_KEYOUT1_MARK, PORT193_SCIFA5_CTS_MARK,
+	BBIF2_TSYNC1_MARK,
+	LCDD2_MARK, PORT194_KEYOUT2_MARK, PORT194_SCIFA5_RTS_MARK,
+	BBIF2_TSCK1_MARK,
+	LCDD3_MARK, PORT195_KEYOUT3_MARK, PORT195_SCIFA5_RXD_MARK,
+	BBIF2_TXD1_MARK,
+	LCDD4_MARK, PORT196_KEYOUT4_MARK, PORT196_SCIFA5_TXD_MARK,
+	LCDD5_MARK, PORT197_KEYOUT5_MARK, PORT197_SCIFA5_SCK_MARK,
+	MFG2_OUT2_MARK,
+	TPU2TO1_MARK,
+	LCDD6_MARK, XWR2_MARK,
+	LCDD7_MARK, TPU4TO1_MARK, MFG4_OUT2_MARK, XWR3_MARK,
+	LCDD8_MARK, PORT200_KEYIN0_MARK, VIO_DR0_MARK, D16_MARK, ED16_MARK,
+	LCDD9_MARK, PORT201_KEYIN1_MARK, VIO_DR1_MARK, D17_MARK, ED17_MARK,
+	LCDD10_MARK, PORT202_KEYIN2_MARK, VIO_DR2_MARK, D18_MARK, ED18_MARK,
+	LCDD11_MARK, PORT203_KEYIN3_MARK, VIO_DR3_MARK, D19_MARK, ED19_MARK,
+	LCDD12_MARK, PORT204_KEYIN4_MARK, VIO_DR4_MARK, D20_MARK, ED20_MARK,
+	LCDD13_MARK, PORT205_KEYIN5_MARK, VIO_DR5_MARK, D21_MARK, ED21_MARK,
+	LCDD14_MARK, PORT206_KEYIN6_MARK, VIO_DR6_MARK, D22_MARK, ED22_MARK,
+	LCDD15_MARK, PORT207_MSIOF0L_SS1_MARK, PORT207_KEYOUT0_MARK,
+	VIO_DR7_MARK, D23_MARK, ED23_MARK,
+	LCDD16_MARK, PORT208_MSIOF0L_SS2_MARK, PORT208_KEYOUT1_MARK,
+	VIO_VDR_MARK, D24_MARK, ED24_MARK,
+	LCDD17_MARK, PORT209_KEYOUT2_MARK, VIO_HDR_MARK, D25_MARK, ED25_MARK,
+	LCDD18_MARK, DREQ2_MARK, PORT210_MSIOF0L_SS1_MARK, D26_MARK, ED26_MARK,
+	LCDD19_MARK, PORT211_MSIOF0L_SS2_MARK, D27_MARK, ED27_MARK,
+	LCDD20_MARK, TS_SPSYNC1_MARK, MSIOF0L_MCK0_MARK, D28_MARK, ED28_MARK,
+	LCDD21_MARK, TS_SDAT1_MARK, MSIOF0L_MCK1_MARK, D29_MARK, ED29_MARK,
+	LCDD22_MARK, TS_SDEN1_MARK, MSIOF0L_RSCK_MARK, D30_MARK, ED30_MARK,
+	LCDD23_MARK, TS_SCK1_MARK, MSIOF0L_RSYNC_MARK, D31_MARK, ED31_MARK,
+	LCDDCK_MARK, LCDWR_MARK, PORT216_KEYOUT3_MARK, VIO_CLKR_MARK,
+	LCDRD_MARK, DACK2_MARK, MSIOF0L_TSYNC_MARK,
+	LCDHSYN_MARK, LCDCS_MARK, LCDCS2_MARK, DACK3_MARK,
+	PORT218_VIO_CKOR_MARK, PORT218_KEYOUT4_MARK,
+	LCDDISP_MARK, LCDRS_MARK, DREQ3_MARK, MSIOF0L_TSCK_MARK,
+	LCDVSYN_MARK, LCDVSYN2_MARK, PORT220_KEYOUT5_MARK,
+	LCDLCLK_MARK, DREQ1_MARK, PWEN_MARK, MSIOF0L_RXD_MARK,
+	LCDDON_MARK, LCDDON2_MARK, DACK1_MARK, OVCN_MARK, MSIOF0L_TXD_MARK,
+	SCIFA1_TXD_MARK, OVCN2_MARK,
+	EXTLP_MARK, SCIFA1_SCK_MARK, USBTERM_MARK, PORT226_VIO_CKO2_MARK,
+	SCIFA1_RTS_MARK, IDIN_MARK,
+	SCIFA1_RXD_MARK,
+	SCIFA1_CTS_MARK, MFG1_IN1_MARK,
+	MSIOF1_TXD_MARK, SCIFA2_TXD2_MARK, PORT230_FSIAOMC_MARK,
+	MSIOF1_TSYNC_MARK, SCIFA2_CTS2_MARK, PORT231_FSIAOLR_MARK,
+	MSIOF1_TSCK_MARK, SCIFA2_SCK2_MARK, PORT232_FSIAOBT_MARK,
+	MSIOF1_RXD_MARK, SCIFA2_RXD2_MARK, GPS_VCOTRIG_MARK,
+	PORT233_FSIACK_MARK,
+	MSIOF1_RSCK_MARK, SCIFA2_RTS2_MARK, PORT234_FSIAOSLD_MARK,
+	MSIOF1_RSYNC_MARK, OPORT0_MARK, MFG1_IN2_MARK, PORT235_FSIAILR_MARK,
+	MSIOF1_MCK0_MARK, I2C_SDA2_MARK, PORT236_FSIAIBT_MARK,
+	MSIOF1_MCK1_MARK, I2C_SCL2_MARK, PORT237_FSIAISLD_MARK,
+	MSIOF1_SS1_MARK, EDBGREQ3_MARK,
+
+	/* 55-5 */
+	MSIOF1_SS2_MARK,
+	SCIFA6_TXD_MARK,
+	PORT241_IRDA_OUT_MARK, PORT241_IROUT_MARK, MFG4_OUT1_MARK,
+	TPU4TO0_MARK,
+	PORT242_IRDA_IN_MARK, MFG4_IN2_MARK,
+	PORT243_IRDA_FIRSEL_MARK, PORT243_VIO_CKO2_MARK,
+	PORT244_SCIFA5_CTS_MARK, MFG2_IN1_MARK, PORT244_SCIFB_CTS_MARK,
+	PORT244_MSIOF2_RXD_MARK,
+	PORT245_SCIFA5_RTS_MARK, MFG2_IN2_MARK, PORT245_SCIFB_RTS_MARK,
+	PORT245_MSIOF2_TXD_MARK,
+	PORT246_SCIFA5_RXD_MARK, MFG1_OUT1_MARK, PORT246_SCIFB_RXD_MARK,
+	TPU1TO0_MARK,
+	PORT247_SCIFA5_TXD_MARK, MFG3_OUT2_MARK, PORT247_SCIFB_TXD_MARK,
+	TPU3TO1_MARK,
+	PORT248_SCIFA5_SCK_MARK, MFG2_OUT1_MARK, PORT248_SCIFB_SCK_MARK,
+	TPU2TO0_MARK,
+	PORT248_MSIOF2_TSCK_MARK,
+	PORT249_IROUT_MARK, MFG4_IN1_MARK, PORT249_MSIOF2_TSYNC_MARK,
+	SDHICLK0_MARK, TCK2_SWCLK_MC0_MARK,
+	SDHICD0_MARK,
+	SDHID0_0_MARK, TMS2_SWDIO_MC0_MARK,
+	SDHID0_1_MARK, TDO2_SWO0_MC0_MARK,
+	SDHID0_2_MARK, TDI2_MARK,
+	SDHID0_3_MARK, RTCK2_SWO1_MC0_MARK,
+	SDHICMD0_MARK, TRST2_MARK,
+	SDHIWP0_MARK, EDBGREQ2_MARK,
+	SDHICLK1_MARK, TCK3_SWCLK_MC1_MARK,
+	SDHID1_0_MARK, M11_SLCD_SO2_MARK, TS_SPSYNC2_MARK,
+	TMS3_SWDIO_MC1_MARK,
+	SDHID1_1_MARK, M9_SLCD_A02_MARK, TS_SDAT2_MARK, TDO3_SWO0_MC1_MARK,
+	SDHID1_2_MARK, M10_SLCD_CK2_MARK, TS_SDEN2_MARK, TDI3_MARK,
+	SDHID1_3_MARK, M12_SLCD_CE2_MARK, TS_SCK2_MARK, RTCK3_SWO1_MC1_MARK,
+	SDHICMD1_MARK, TRST3_MARK,
+	RESETOUTS_MARK,
+	PINMUX_MARK_END,
+};
+
+#define PORT_DATA_I(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_IN)
+
+#define PORT_DATA_I_PD(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
+				PORT##nr##_IN, PORT##nr##_IN_PD)
+
+#define PORT_DATA_I_PU(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
+				PORT##nr##_IN, PORT##nr##_IN_PU)
+
+#define PORT_DATA_I_PU_PD(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
+				PORT##nr##_IN, PORT##nr##_IN_PD,	\
+				PORT##nr##_IN_PU)
+
+#define PORT_DATA_O(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
+				PORT##nr##_OUT)
+
+#define PORT_DATA_IO(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
+				PORT##nr##_OUT, PORT##nr##_IN)
+
+#define PORT_DATA_IO_PD(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
+				PORT##nr##_OUT, PORT##nr##_IN,		\
+				PORT##nr##_IN_PD)
+
+#define PORT_DATA_IO_PU(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
+				PORT##nr##_OUT, PORT##nr##_IN,		\
+				PORT##nr##_IN_PU)
+
+#define PORT_DATA_IO_PU_PD(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
+				PORT##nr##_OUT, PORT##nr##_IN,		\
+				PORT##nr##_IN_PD, PORT##nr##_IN_PU)
+
+static pinmux_enum_t pinmux_data[] = {
+	/* specify valid pin states for each pin in GPIO mode */
+	/* 55-1 (GPIO) */
+	PORT_DATA_I_PD(0), PORT_DATA_I_PU(1),
+	PORT_DATA_I_PU(2), PORT_DATA_I_PU(3),
+	PORT_DATA_I_PU(4), PORT_DATA_I_PU(5),
+	PORT_DATA_I_PU(6), PORT_DATA_I_PU(7),
+	PORT_DATA_I_PU(8), PORT_DATA_I_PU(9),
+	PORT_DATA_I_PU(10), PORT_DATA_I_PU(11),
+	PORT_DATA_IO_PU(12), PORT_DATA_IO_PU(13),
+	PORT_DATA_IO_PU_PD(14), PORT_DATA_IO_PU_PD(15),
+	PORT_DATA_O(16), PORT_DATA_IO(17),
+	PORT_DATA_O(18), PORT_DATA_O(19),
+	PORT_DATA_O(20), PORT_DATA_O(21),
+	PORT_DATA_O(22), PORT_DATA_O(23),
+	PORT_DATA_O(24), PORT_DATA_I_PD(25),
+	PORT_DATA_I_PD(26), PORT_DATA_O(27),
+	PORT_DATA_O(28), PORT_DATA_O(29),
+	PORT_DATA_IO(30), PORT_DATA_IO_PU(31),
+	PORT_DATA_IO_PD(32), PORT_DATA_I_PU(33),
+	PORT_DATA_IO_PD(34), PORT_DATA_I_PU_PD(35),
+	PORT_DATA_O(36), PORT_DATA_IO(37),
+
+	/* 55-2 (GPIO) */
+	PORT_DATA_O(38), PORT_DATA_I_PU(39),
+	PORT_DATA_I_PU_PD(40), PORT_DATA_O(41),
+	PORT_DATA_IO_PD(42), PORT_DATA_IO_PD(43),
+	PORT_DATA_IO_PD(44), PORT_DATA_I_PD(45),
+	PORT_DATA_I_PD(46), PORT_DATA_I_PD(47),
+	PORT_DATA_I_PD(48), PORT_DATA_IO_PU_PD(49),
+	PORT_DATA_IO_PD(50), PORT_DATA_IO_PD(51),
+	PORT_DATA_O(52), PORT_DATA_IO_PU_PD(53),
+	PORT_DATA_IO_PU_PD(54), PORT_DATA_IO_PD(55),
+	PORT_DATA_I_PU_PD(56), PORT_DATA_IO(57),
+	PORT_DATA_IO(58), PORT_DATA_IO(59),
+	PORT_DATA_IO(60), PORT_DATA_IO(61),
+	PORT_DATA_IO_PD(62), PORT_DATA_IO_PD(63),
+	PORT_DATA_IO_PD(64), PORT_DATA_IO_PD(65),
+	PORT_DATA_IO_PU_PD(66), PORT_DATA_IO_PU_PD(67),
+	PORT_DATA_IO_PU_PD(68), PORT_DATA_IO_PU_PD(69),
+	PORT_DATA_IO_PU_PD(70), PORT_DATA_IO_PU_PD(71),
+	PORT_DATA_IO_PU_PD(72), PORT_DATA_I_PU_PD(73),
+	PORT_DATA_IO_PU(74), PORT_DATA_IO_PU(75),
+	PORT_DATA_IO_PU(76), PORT_DATA_IO_PU(77),
+	PORT_DATA_IO_PU(78), PORT_DATA_IO_PU(79),
+	PORT_DATA_IO_PU(80), PORT_DATA_IO_PU(81),
+	PORT_DATA_IO_PU(82), PORT_DATA_IO_PU(83),
+	PORT_DATA_IO_PU(84), PORT_DATA_IO_PU(85),
+	PORT_DATA_IO_PU(86), PORT_DATA_IO_PU(87),
+	PORT_DATA_IO_PU(88), PORT_DATA_IO_PU(89),
+	PORT_DATA_O(90), PORT_DATA_IO_PU(91),
+	PORT_DATA_O(92),
+
+	/* 55-3 (GPIO) */
+	PORT_DATA_IO_PU(93),
+	PORT_DATA_O(94),
+	PORT_DATA_I_PU_PD(95),
+	PORT_DATA_IO(96), PORT_DATA_IO(97),
+	PORT_DATA_IO(98), PORT_DATA_I_PU(99),
+	PORT_DATA_O(100), PORT_DATA_O(101),
+	PORT_DATA_I_PU(102), PORT_DATA_IO_PD(103),
+	PORT_DATA_I_PD(104), PORT_DATA_I_PD(105),
+	PORT_DATA_I_PD(106), PORT_DATA_I_PD(107),
+	PORT_DATA_I_PD(108), PORT_DATA_IO_PD(109),
+	PORT_DATA_IO_PD(110), PORT_DATA_I_PD(111),
+	PORT_DATA_IO_PD(112), PORT_DATA_IO_PD(113),
+	PORT_DATA_IO_PD(114), PORT_DATA_I_PD(115),
+	PORT_DATA_I_PD(116), PORT_DATA_IO_PD(117),
+	PORT_DATA_I_PD(118), PORT_DATA_IO_PD(128),
+	PORT_DATA_IO_PD(129), PORT_DATA_IO_PD(130),
+	PORT_DATA_IO_PD(131), PORT_DATA_IO_PD(132),
+	PORT_DATA_IO_PD(133), PORT_DATA_IO_PU_PD(134),
+	PORT_DATA_IO_PU_PD(135), PORT_DATA_IO_PU_PD(136),
+	PORT_DATA_IO_PU_PD(137), PORT_DATA_IO_PD(138),
+	PORT_DATA_IO_PD(139), PORT_DATA_IO_PD(140),
+	PORT_DATA_IO_PD(141), PORT_DATA_IO_PD(142),
+	PORT_DATA_IO_PD(143), PORT_DATA_IO_PU_PD(144),
+	PORT_DATA_IO_PD(145), PORT_DATA_IO_PU_PD(146),
+	PORT_DATA_IO_PU_PD(147), PORT_DATA_IO_PU_PD(148),
+	PORT_DATA_IO_PU_PD(149), PORT_DATA_I_PD(150),
+	PORT_DATA_IO_PU_PD(151), PORT_DATA_IO_PD(152),
+	PORT_DATA_IO_PD(153), PORT_DATA_IO_PD(154),
+	PORT_DATA_I_PD(155), PORT_DATA_IO_PU_PD(156),
+	PORT_DATA_I_PD(157), PORT_DATA_IO_PD(158),
+
+	/* 55-4 (GPIO) */
+	PORT_DATA_IO_PU_PD(159), PORT_DATA_IO_PU_PD(160),
+	PORT_DATA_I_PU_PD(161), PORT_DATA_I_PU_PD(162),
+	PORT_DATA_IO_PU_PD(163), PORT_DATA_I_PU_PD(164),
+	PORT_DATA_IO_PD(192), PORT_DATA_IO_PD(193),
+	PORT_DATA_IO_PD(194), PORT_DATA_IO_PD(195),
+	PORT_DATA_IO_PD(196), PORT_DATA_IO_PD(197),
+	PORT_DATA_IO_PD(198), PORT_DATA_IO_PD(199),
+	PORT_DATA_IO_PU_PD(200), PORT_DATA_IO_PU_PD(201),
+	PORT_DATA_IO_PU_PD(202), PORT_DATA_IO_PU_PD(203),
+	PORT_DATA_IO_PU_PD(204), PORT_DATA_IO_PU_PD(205),
+	PORT_DATA_IO_PU_PD(206), PORT_DATA_IO_PD(207),
+	PORT_DATA_IO_PD(208), PORT_DATA_IO_PD(209),
+	PORT_DATA_IO_PD(210), PORT_DATA_IO_PD(211),
+	PORT_DATA_IO_PD(212), PORT_DATA_IO_PD(213),
+	PORT_DATA_IO_PD(214), PORT_DATA_IO_PD(215),
+	PORT_DATA_IO_PD(216), PORT_DATA_IO_PD(217),
+	PORT_DATA_O(218), PORT_DATA_IO_PD(219),
+	PORT_DATA_IO_PD(220), PORT_DATA_IO_PD(221),
+	PORT_DATA_IO_PU_PD(222),
+	PORT_DATA_I_PU_PD(223), PORT_DATA_I_PU_PD(224),
+	PORT_DATA_IO_PU_PD(225), PORT_DATA_O(226),
+	PORT_DATA_IO_PU_PD(227), PORT_DATA_I_PD(228),
+	PORT_DATA_I_PD(229), PORT_DATA_IO(230),
+	PORT_DATA_IO_PD(231), PORT_DATA_IO_PU_PD(232),
+	PORT_DATA_I_PD(233), PORT_DATA_IO_PU_PD(234),
+	PORT_DATA_IO_PU_PD(235), PORT_DATA_IO_PU_PD(236),
+	PORT_DATA_IO_PD(237), PORT_DATA_IO_PU_PD(238),
+
+	/* 55-5 (GPIO) */
+	PORT_DATA_IO_PU_PD(239), PORT_DATA_IO_PU_PD(240),
+	PORT_DATA_O(241), PORT_DATA_I_PD(242),
+	PORT_DATA_IO_PU_PD(243), PORT_DATA_IO_PU_PD(244),
+	PORT_DATA_IO_PU_PD(245), PORT_DATA_IO_PU_PD(246),
+	PORT_DATA_IO_PU_PD(247), PORT_DATA_IO_PU_PD(248),
+	PORT_DATA_IO_PU_PD(249), PORT_DATA_IO_PD(250),
+	PORT_DATA_IO_PU_PD(251), PORT_DATA_IO_PU_PD(252),
+	PORT_DATA_IO_PU_PD(253), PORT_DATA_IO_PU_PD(254),
+	PORT_DATA_IO_PU_PD(255), PORT_DATA_IO_PU_PD(256),
+	PORT_DATA_IO_PU_PD(257), PORT_DATA_IO_PD(258),
+	PORT_DATA_IO_PU_PD(259), PORT_DATA_IO_PU_PD(260),
+	PORT_DATA_IO_PU_PD(261), PORT_DATA_IO_PU_PD(262),
+	PORT_DATA_IO_PU_PD(263),
+
+	/* Special Pull-up / Pull-down Functions */
+	PINMUX_DATA(PORT66_KEYIN0_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0,
+				PORT66_FN2, PORT66_IN_PU),
+	PINMUX_DATA(PORT67_KEYIN1_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0,
+				PORT67_FN2, PORT67_IN_PU),
+	PINMUX_DATA(PORT68_KEYIN2_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0,
+				PORT68_FN2, PORT68_IN_PU),
+	PINMUX_DATA(PORT69_KEYIN3_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0,
+				PORT69_FN2, PORT69_IN_PU),
+	PINMUX_DATA(PORT70_KEYIN4_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0,
+				PORT70_FN2, PORT70_IN_PU),
+	PINMUX_DATA(PORT71_KEYIN5_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0,
+				PORT71_FN2, PORT71_IN_PU),
+	PINMUX_DATA(PORT72_KEYIN6_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0,
+				PORT72_FN2, PORT72_IN_PU),
+
+
+	/* 55-1 (FN) */
+	PINMUX_DATA(VBUS_0_MARK, PORT0_FN1),
+	PINMUX_DATA(CPORT0_MARK, PORT1_FN1),
+	PINMUX_DATA(CPORT1_MARK, PORT2_FN1),
+	PINMUX_DATA(CPORT2_MARK, PORT3_FN1),
+	PINMUX_DATA(CPORT3_MARK, PORT4_FN1),
+	PINMUX_DATA(CPORT4_MARK, PORT5_FN1),
+	PINMUX_DATA(CPORT5_MARK, PORT6_FN1),
+	PINMUX_DATA(CPORT6_MARK, PORT7_FN1),
+	PINMUX_DATA(CPORT7_MARK, PORT8_FN1),
+	PINMUX_DATA(CPORT8_MARK, PORT9_FN1),
+	PINMUX_DATA(CPORT9_MARK, PORT10_FN1),
+	PINMUX_DATA(CPORT10_MARK, PORT11_FN1),
+	PINMUX_DATA(CPORT11_MARK, PORT12_FN1),
+	PINMUX_DATA(SIN2_MARK, PORT12_FN2),
+	PINMUX_DATA(CPORT12_MARK, PORT13_FN1),
+	PINMUX_DATA(XCTS2_MARK, PORT13_FN2),
+	PINMUX_DATA(CPORT13_MARK, PORT14_FN1),
+	PINMUX_DATA(RFSPO4_MARK, PORT14_FN2),
+	PINMUX_DATA(CPORT14_MARK, PORT15_FN1),
+	PINMUX_DATA(RFSPO5_MARK, PORT15_FN2),
+	PINMUX_DATA(CPORT15_MARK, PORT16_FN1),
+	PINMUX_DATA(SCIFA0_SCK_MARK, PORT16_FN2),
+	PINMUX_DATA(GPS_AGC2_MARK, PORT16_FN3),
+	PINMUX_DATA(CPORT16_MARK, PORT17_FN1),
+	PINMUX_DATA(SCIFA0_TXD_MARK, PORT17_FN2),
+	PINMUX_DATA(GPS_AGC3_MARK, PORT17_FN3),
+	PINMUX_DATA(CPORT17_IC_OE_MARK, PORT18_FN1),
+	PINMUX_DATA(SOUT2_MARK, PORT18_FN2),
+	PINMUX_DATA(CPORT18_MARK, PORT19_FN1),
+	PINMUX_DATA(XRTS2_MARK, PORT19_FN2),
+	PINMUX_DATA(PORT19_VIO_CKO2_MARK, PORT19_FN3),
+	PINMUX_DATA(CPORT19_MPORT1_MARK, PORT20_FN1),
+	PINMUX_DATA(CPORT20_MARK, PORT21_FN1),
+	PINMUX_DATA(RFSPO6_MARK, PORT21_FN2),
+	PINMUX_DATA(CPORT21_MARK, PORT22_FN1),
+	PINMUX_DATA(STATUS0_MARK, PORT22_FN2),
+	PINMUX_DATA(CPORT22_MARK, PORT23_FN1),
+	PINMUX_DATA(STATUS1_MARK, PORT23_FN2),
+	PINMUX_DATA(CPORT23_MARK, PORT24_FN1),
+	PINMUX_DATA(STATUS2_MARK, PORT24_FN2),
+	PINMUX_DATA(RFSPO7_MARK, PORT24_FN3),
+	PINMUX_DATA(B_SYNLD1_MARK, PORT25_FN1),
+	PINMUX_DATA(B_SYNLD2_MARK, PORT26_FN1),
+	PINMUX_DATA(SYSENMSK_MARK, PORT26_FN2),
+	PINMUX_DATA(XMAINPS_MARK, PORT27_FN1),
+	PINMUX_DATA(XDIVPS_MARK, PORT28_FN1),
+	PINMUX_DATA(XIDRST_MARK, PORT29_FN1),
+	PINMUX_DATA(IDCLK_MARK, PORT30_FN1),
+	PINMUX_DATA(IC_DP_MARK, PORT30_FN2),
+	PINMUX_DATA(IDIO_MARK, PORT31_FN1),
+	PINMUX_DATA(IC_DM_MARK, PORT31_FN2),
+	PINMUX_DATA(SOUT1_MARK, PORT32_FN1),
+	PINMUX_DATA(SCIFA4_TXD_MARK, PORT32_FN2),
+	PINMUX_DATA(M02_BERDAT_MARK, PORT32_FN3),
+	PINMUX_DATA(SIN1_MARK, PORT33_FN1),
+	PINMUX_DATA(SCIFA4_RXD_MARK, PORT33_FN2),
+	PINMUX_DATA(XWUP_MARK, PORT33_FN3),
+	PINMUX_DATA(XRTS1_MARK, PORT34_FN1),
+	PINMUX_DATA(SCIFA4_RTS_MARK, PORT34_FN2),
+	PINMUX_DATA(M03_BERCLK_MARK, PORT34_FN3),
+	PINMUX_DATA(XCTS1_MARK, PORT35_FN1),
+	PINMUX_DATA(SCIFA4_CTS_MARK, PORT35_FN2),
+	PINMUX_DATA(PCMCLKO_MARK, PORT36_FN1),
+	PINMUX_DATA(SYNC8KO_MARK, PORT37_FN1),
+
+	/* 55-2 (FN) */
+	PINMUX_DATA(DNPCM_A_MARK, PORT38_FN1),
+	PINMUX_DATA(UPPCM_A_MARK, PORT39_FN1),
+	PINMUX_DATA(VACK_MARK, PORT40_FN1),
+	PINMUX_DATA(XTALB1L_MARK, PORT41_FN1),
+	PINMUX_DATA(GPS_AGC1_MARK, PORT42_FN1),
+	PINMUX_DATA(SCIFA0_RTS_MARK, PORT42_FN2),
+	PINMUX_DATA(GPS_AGC4_MARK, PORT43_FN1),
+	PINMUX_DATA(SCIFA0_RXD_MARK, PORT43_FN2),
+	PINMUX_DATA(GPS_PWRDOWN_MARK, PORT44_FN1),
+	PINMUX_DATA(SCIFA0_CTS_MARK, PORT44_FN2),
+	PINMUX_DATA(GPS_IM_MARK, PORT45_FN1),
+	PINMUX_DATA(GPS_IS_MARK, PORT46_FN1),
+	PINMUX_DATA(GPS_QM_MARK, PORT47_FN1),
+	PINMUX_DATA(GPS_QS_MARK, PORT48_FN1),
+	PINMUX_DATA(FMSOCK_MARK, PORT49_FN1),
+	PINMUX_DATA(PORT49_IRDA_OUT_MARK, PORT49_FN2),
+	PINMUX_DATA(PORT49_IROUT_MARK, PORT49_FN3),
+	PINMUX_DATA(FMSOOLR_MARK, PORT50_FN1),
+	PINMUX_DATA(BBIF2_TSYNC2_MARK, PORT50_FN2),
+	PINMUX_DATA(TPU2TO2_MARK, PORT50_FN3),
+	PINMUX_DATA(IPORT3_MARK, PORT50_FN4),
+	PINMUX_DATA(FMSIOLR_MARK, PORT50_FN5),
+	PINMUX_DATA(FMSOOBT_MARK, PORT51_FN1),
+	PINMUX_DATA(BBIF2_TSCK2_MARK, PORT51_FN2),
+	PINMUX_DATA(TPU2TO3_MARK, PORT51_FN3),
+	PINMUX_DATA(OPORT1_MARK, PORT51_FN4),
+	PINMUX_DATA(FMSIOBT_MARK, PORT51_FN5),
+	PINMUX_DATA(FMSOSLD_MARK, PORT52_FN1),
+	PINMUX_DATA(BBIF2_TXD2_MARK, PORT52_FN2),
+	PINMUX_DATA(OPORT2_MARK, PORT52_FN3),
+	PINMUX_DATA(FMSOILR_MARK, PORT53_FN1),
+	PINMUX_DATA(PORT53_IRDA_IN_MARK, PORT53_FN2),
+	PINMUX_DATA(TPU3TO3_MARK, PORT53_FN3),
+	PINMUX_DATA(OPORT3_MARK, PORT53_FN4),
+	PINMUX_DATA(FMSIILR_MARK, PORT53_FN5),
+	PINMUX_DATA(FMSOIBT_MARK, PORT54_FN1),
+	PINMUX_DATA(PORT54_IRDA_FIRSEL_MARK, PORT54_FN2),
+	PINMUX_DATA(TPU3TO2_MARK, PORT54_FN3),
+	PINMUX_DATA(FMSIIBT_MARK, PORT54_FN4),
+	PINMUX_DATA(FMSISLD_MARK, PORT55_FN1),
+	PINMUX_DATA(MFG0_OUT1_MARK, PORT55_FN2),
+	PINMUX_DATA(TPU0TO0_MARK, PORT55_FN3),
+	PINMUX_DATA(A0_EA0_MARK, PORT57_FN1),
+	PINMUX_DATA(BS_MARK, PORT57_FN2),
+	PINMUX_DATA(A12_EA12_MARK, PORT58_FN1),
+	PINMUX_DATA(PORT58_VIO_CKOR_MARK, PORT58_FN2),
+	PINMUX_DATA(TPU4TO2_MARK, PORT58_FN3),
+	PINMUX_DATA(A13_EA13_MARK, PORT59_FN1),
+	PINMUX_DATA(PORT59_IROUT_MARK, PORT59_FN2),
+	PINMUX_DATA(MFG0_OUT2_MARK, PORT59_FN3),
+	PINMUX_DATA(TPU0TO1_MARK, PORT59_FN4),
+	PINMUX_DATA(A14_EA14_MARK, PORT60_FN1),
+	PINMUX_DATA(PORT60_KEYOUT5_MARK, PORT60_FN2),
+	PINMUX_DATA(A15_EA15_MARK, PORT61_FN1),
+	PINMUX_DATA(PORT61_KEYOUT4_MARK, PORT61_FN2),
+	PINMUX_DATA(A16_EA16_MARK, PORT62_FN1),
+	PINMUX_DATA(PORT62_KEYOUT3_MARK, PORT62_FN2),
+	PINMUX_DATA(MSIOF0_SS1_MARK, PORT62_FN3),
+	PINMUX_DATA(A17_EA17_MARK, PORT63_FN1),
+	PINMUX_DATA(PORT63_KEYOUT2_MARK, PORT63_FN2),
+	PINMUX_DATA(MSIOF0_TSYNC_MARK, PORT63_FN3),
+	PINMUX_DATA(A18_EA18_MARK, PORT64_FN1),
+	PINMUX_DATA(PORT64_KEYOUT1_MARK, PORT64_FN2),
+	PINMUX_DATA(MSIOF0_TSCK_MARK, PORT64_FN3),
+	PINMUX_DATA(A19_EA19_MARK, PORT65_FN1),
+	PINMUX_DATA(PORT65_KEYOUT0_MARK, PORT65_FN2),
+	PINMUX_DATA(MSIOF0_TXD_MARK, PORT65_FN3),
+	PINMUX_DATA(A20_EA20_MARK, PORT66_FN1),
+	PINMUX_DATA(PORT66_KEYIN0_MARK, PORT66_FN2),
+	PINMUX_DATA(MSIOF0_RSCK_MARK, PORT66_FN3),
+	PINMUX_DATA(A21_EA21_MARK, PORT67_FN1),
+	PINMUX_DATA(PORT67_KEYIN1_MARK, PORT67_FN2),
+	PINMUX_DATA(MSIOF0_RSYNC_MARK, PORT67_FN3),
+	PINMUX_DATA(A22_EA22_MARK, PORT68_FN1),
+	PINMUX_DATA(PORT68_KEYIN2_MARK, PORT68_FN2),
+	PINMUX_DATA(MSIOF0_MCK0_MARK, PORT68_FN3),
+	PINMUX_DATA(A23_EA23_MARK, PORT69_FN1),
+	PINMUX_DATA(PORT69_KEYIN3_MARK, PORT69_FN2),
+	PINMUX_DATA(MSIOF0_MCK1_MARK, PORT69_FN3),
+	PINMUX_DATA(A24_EA24_MARK, PORT70_FN1),
+	PINMUX_DATA(PORT70_KEYIN4_MARK, PORT70_FN2),
+	PINMUX_DATA(MSIOF0_RXD_MARK, PORT70_FN3),
+	PINMUX_DATA(A25_EA25_MARK, PORT71_FN1),
+	PINMUX_DATA(PORT71_KEYIN5_MARK, PORT71_FN2),
+	PINMUX_DATA(MSIOF0_SS2_MARK, PORT71_FN3),
+	PINMUX_DATA(A26_MARK, PORT72_FN1),
+	PINMUX_DATA(PORT72_KEYIN6_MARK, PORT72_FN2),
+	PINMUX_DATA(D0_ED0_NAF0_MARK, PORT74_FN1),
+	PINMUX_DATA(D1_ED1_NAF1_MARK, PORT75_FN1),
+	PINMUX_DATA(D2_ED2_NAF2_MARK, PORT76_FN1),
+	PINMUX_DATA(D3_ED3_NAF3_MARK, PORT77_FN1),
+	PINMUX_DATA(D4_ED4_NAF4_MARK, PORT78_FN1),
+	PINMUX_DATA(D5_ED5_NAF5_MARK, PORT79_FN1),
+	PINMUX_DATA(D6_ED6_NAF6_MARK, PORT80_FN1),
+	PINMUX_DATA(D7_ED7_NAF7_MARK, PORT81_FN1),
+	PINMUX_DATA(D8_ED8_NAF8_MARK, PORT82_FN1),
+	PINMUX_DATA(D9_ED9_NAF9_MARK, PORT83_FN1),
+	PINMUX_DATA(D10_ED10_NAF10_MARK, PORT84_FN1),
+	PINMUX_DATA(D11_ED11_NAF11_MARK, PORT85_FN1),
+	PINMUX_DATA(D12_ED12_NAF12_MARK, PORT86_FN1),
+	PINMUX_DATA(D13_ED13_NAF13_MARK, PORT87_FN1),
+	PINMUX_DATA(D14_ED14_NAF14_MARK, PORT88_FN1),
+	PINMUX_DATA(D15_ED15_NAF15_MARK, PORT89_FN1),
+	PINMUX_DATA(CS4_MARK, PORT90_FN1),
+	PINMUX_DATA(CS5A_MARK, PORT91_FN1),
+	PINMUX_DATA(FMSICK_MARK, PORT91_FN2),
+	PINMUX_DATA(CS5B_MARK, PORT92_FN1),
+	PINMUX_DATA(FCE1_MARK, PORT92_FN2),
+
+	/* 55-3 (FN) */
+	PINMUX_DATA(CS6B_MARK, PORT93_FN1),
+	PINMUX_DATA(XCS2_MARK, PORT93_FN2),
+	PINMUX_DATA(CS6A_MARK, PORT93_FN3),
+	PINMUX_DATA(DACK0_MARK, PORT93_FN4),
+	PINMUX_DATA(FCE0_MARK, PORT94_FN1),
+	PINMUX_DATA(WAIT_MARK, PORT95_FN1),
+	PINMUX_DATA(DREQ0_MARK, PORT95_FN2),
+	PINMUX_DATA(RD_XRD_MARK, PORT96_FN1),
+	PINMUX_DATA(WE0_XWR0_FWE_MARK, PORT97_FN1),
+	PINMUX_DATA(WE1_XWR1_MARK, PORT98_FN1),
+	PINMUX_DATA(FRB_MARK, PORT99_FN1),
+	PINMUX_DATA(CKO_MARK, PORT100_FN1),
+	PINMUX_DATA(NBRSTOUT_MARK, PORT101_FN1),
+	PINMUX_DATA(NBRST_MARK, PORT102_FN1),
+	PINMUX_DATA(GPS_EPPSIN_MARK, PORT106_FN1),
+	PINMUX_DATA(LATCHPULSE_MARK, PORT110_FN1),
+	PINMUX_DATA(LTESIGNAL_MARK, PORT111_FN1),
+	PINMUX_DATA(LEGACYSTATE_MARK, PORT112_FN1),
+	PINMUX_DATA(TCKON_MARK, PORT118_FN1),
+	PINMUX_DATA(VIO_VD_MARK, PORT128_FN1),
+	PINMUX_DATA(PORT128_KEYOUT0_MARK, PORT128_FN2),
+	PINMUX_DATA(IPORT0_MARK, PORT128_FN3),
+	PINMUX_DATA(VIO_HD_MARK, PORT129_FN1),
+	PINMUX_DATA(PORT129_KEYOUT1_MARK, PORT129_FN2),
+	PINMUX_DATA(IPORT1_MARK, PORT129_FN3),
+	PINMUX_DATA(VIO_D0_MARK, PORT130_FN1),
+	PINMUX_DATA(PORT130_KEYOUT2_MARK, PORT130_FN2),
+	PINMUX_DATA(PORT130_MSIOF2_RXD_MARK, PORT130_FN3),
+	PINMUX_DATA(VIO_D1_MARK, PORT131_FN1),
+	PINMUX_DATA(PORT131_KEYOUT3_MARK, PORT131_FN2),
+	PINMUX_DATA(PORT131_MSIOF2_SS1_MARK, PORT131_FN3),
+	PINMUX_DATA(VIO_D2_MARK, PORT132_FN1),
+	PINMUX_DATA(PORT132_KEYOUT4_MARK, PORT132_FN2),
+	PINMUX_DATA(PORT132_MSIOF2_SS2_MARK, PORT132_FN3),
+	PINMUX_DATA(VIO_D3_MARK, PORT133_FN1),
+	PINMUX_DATA(PORT133_KEYOUT5_MARK, PORT133_FN2),
+	PINMUX_DATA(PORT133_MSIOF2_TSYNC_MARK, PORT133_FN3),
+	PINMUX_DATA(VIO_D4_MARK, PORT134_FN1),
+	PINMUX_DATA(PORT134_KEYIN0_MARK, PORT134_FN2),
+	PINMUX_DATA(PORT134_MSIOF2_TXD_MARK, PORT134_FN3),
+	PINMUX_DATA(VIO_D5_MARK, PORT135_FN1),
+	PINMUX_DATA(PORT135_KEYIN1_MARK, PORT135_FN2),
+	PINMUX_DATA(PORT135_MSIOF2_TSCK_MARK, PORT135_FN3),
+	PINMUX_DATA(VIO_D6_MARK, PORT136_FN1),
+	PINMUX_DATA(PORT136_KEYIN2_MARK, PORT136_FN2),
+	PINMUX_DATA(VIO_D7_MARK, PORT137_FN1),
+	PINMUX_DATA(PORT137_KEYIN3_MARK, PORT137_FN2),
+	PINMUX_DATA(VIO_D8_MARK, PORT138_FN1),
+	PINMUX_DATA(M9_SLCD_A01_MARK, PORT138_FN2),
+	PINMUX_DATA(PORT138_FSIAOMC_MARK, PORT138_FN3),
+	PINMUX_DATA(VIO_D9_MARK, PORT139_FN1),
+	PINMUX_DATA(M10_SLCD_CK1_MARK, PORT139_FN2),
+	PINMUX_DATA(PORT139_FSIAOLR_MARK, PORT139_FN3),
+	PINMUX_DATA(VIO_D10_MARK, PORT140_FN1),
+	PINMUX_DATA(M11_SLCD_SO1_MARK, PORT140_FN2),
+	PINMUX_DATA(TPU0TO2_MARK, PORT140_FN3),
+	PINMUX_DATA(PORT140_FSIAOBT_MARK, PORT140_FN4),
+	PINMUX_DATA(VIO_D11_MARK, PORT141_FN1),
+	PINMUX_DATA(M12_SLCD_CE1_MARK, PORT141_FN2),
+	PINMUX_DATA(TPU0TO3_MARK, PORT141_FN3),
+	PINMUX_DATA(PORT141_FSIAOSLD_MARK, PORT141_FN4),
+	PINMUX_DATA(VIO_D12_MARK, PORT142_FN1),
+	PINMUX_DATA(M13_BSW_MARK, PORT142_FN2),
+	PINMUX_DATA(PORT142_FSIACK_MARK, PORT142_FN3),
+	PINMUX_DATA(VIO_D13_MARK, PORT143_FN1),
+	PINMUX_DATA(M14_GSW_MARK, PORT143_FN2),
+	PINMUX_DATA(PORT143_FSIAILR_MARK, PORT143_FN3),
+	PINMUX_DATA(VIO_D14_MARK, PORT144_FN1),
+	PINMUX_DATA(M15_RSW_MARK, PORT144_FN2),
+	PINMUX_DATA(PORT144_FSIAIBT_MARK, PORT144_FN3),
+	PINMUX_DATA(VIO_D15_MARK, PORT145_FN1),
+	PINMUX_DATA(TPU1TO3_MARK, PORT145_FN2),
+	PINMUX_DATA(PORT145_FSIAISLD_MARK, PORT145_FN3),
+	PINMUX_DATA(VIO_CLK_MARK, PORT146_FN1),
+	PINMUX_DATA(PORT146_KEYIN4_MARK, PORT146_FN2),
+	PINMUX_DATA(IPORT2_MARK, PORT146_FN3),
+	PINMUX_DATA(VIO_FIELD_MARK, PORT147_FN1),
+	PINMUX_DATA(PORT147_KEYIN5_MARK, PORT147_FN2),
+	PINMUX_DATA(VIO_CKO_MARK, PORT148_FN1),
+	PINMUX_DATA(PORT148_KEYIN6_MARK, PORT148_FN2),
+	PINMUX_DATA(A27_MARK, PORT149_FN1),
+	PINMUX_DATA(RDWR_XWE_MARK, PORT149_FN2),
+	PINMUX_DATA(MFG0_IN1_MARK, PORT149_FN3),
+	PINMUX_DATA(MFG0_IN2_MARK, PORT150_FN1),
+	PINMUX_DATA(TS_SPSYNC3_MARK, PORT151_FN1),
+	PINMUX_DATA(MSIOF2_RSCK_MARK, PORT151_FN2),
+	PINMUX_DATA(TS_SDAT3_MARK, PORT152_FN1),
+	PINMUX_DATA(MSIOF2_RSYNC_MARK, PORT152_FN2),
+	PINMUX_DATA(TPU1TO2_MARK, PORT153_FN1),
+	PINMUX_DATA(TS_SDEN3_MARK, PORT153_FN2),
+	PINMUX_DATA(PORT153_MSIOF2_SS1_MARK, PORT153_FN3),
+	PINMUX_DATA(SOUT3_MARK, PORT154_FN1),
+	PINMUX_DATA(SCIFA2_TXD1_MARK, PORT154_FN2),
+	PINMUX_DATA(MSIOF2_MCK0_MARK, PORT154_FN3),
+	PINMUX_DATA(SIN3_MARK, PORT155_FN1),
+	PINMUX_DATA(SCIFA2_RXD1_MARK, PORT155_FN2),
+	PINMUX_DATA(MSIOF2_MCK1_MARK, PORT155_FN3),
+	PINMUX_DATA(XRTS3_MARK, PORT156_FN1),
+	PINMUX_DATA(SCIFA2_RTS1_MARK, PORT156_FN2),
+	PINMUX_DATA(PORT156_MSIOF2_SS2_MARK, PORT156_FN3),
+	PINMUX_DATA(XCTS3_MARK, PORT157_FN1),
+	PINMUX_DATA(SCIFA2_CTS1_MARK, PORT157_FN2),
+	PINMUX_DATA(PORT157_MSIOF2_RXD_MARK, PORT157_FN3),
+
+	/* 55-4 (FN) */
+	PINMUX_DATA(DINT_MARK, PORT158_FN1),
+	PINMUX_DATA(SCIFA2_SCK1_MARK, PORT158_FN2),
+	PINMUX_DATA(TS_SCK3_MARK, PORT158_FN3),
+	PINMUX_DATA(PORT159_SCIFB_SCK_MARK, PORT159_FN1),
+	PINMUX_DATA(PORT159_SCIFA5_SCK_MARK, PORT159_FN2),
+	PINMUX_DATA(NMI_MARK, PORT159_FN3),
+	PINMUX_DATA(PORT160_SCIFB_TXD_MARK, PORT160_FN1),
+	PINMUX_DATA(PORT160_SCIFA5_TXD_MARK, PORT160_FN2),
+	PINMUX_DATA(SOUT0_MARK, PORT160_FN3),
+	PINMUX_DATA(PORT161_SCIFB_CTS_MARK, PORT161_FN1),
+	PINMUX_DATA(PORT161_SCIFA5_CTS_MARK, PORT161_FN2),
+	PINMUX_DATA(XCTS0_MARK, PORT161_FN3),
+	PINMUX_DATA(MFG3_IN2_MARK, PORT161_FN4),
+	PINMUX_DATA(PORT162_SCIFB_RXD_MARK, PORT162_FN1),
+	PINMUX_DATA(PORT162_SCIFA5_RXD_MARK, PORT162_FN2),
+	PINMUX_DATA(SIN0_MARK, PORT162_FN3),
+	PINMUX_DATA(MFG3_IN1_MARK, PORT162_FN4),
+	PINMUX_DATA(PORT163_SCIFB_RTS_MARK, PORT163_FN1),
+	PINMUX_DATA(PORT163_SCIFA5_RTS_MARK, PORT163_FN2),
+	PINMUX_DATA(XRTS0_MARK, PORT163_FN3),
+	PINMUX_DATA(MFG3_OUT1_MARK, PORT163_FN4),
+	PINMUX_DATA(TPU3TO0_MARK, PORT163_FN5),
+	PINMUX_DATA(LCDD0_MARK, PORT192_FN1),
+	PINMUX_DATA(PORT192_KEYOUT0_MARK, PORT192_FN2),
+	PINMUX_DATA(EXT_CKI_MARK, PORT192_FN3),
+	PINMUX_DATA(LCDD1_MARK, PORT193_FN1),
+	PINMUX_DATA(PORT193_KEYOUT1_MARK, PORT193_FN2),
+	PINMUX_DATA(PORT193_SCIFA5_CTS_MARK, PORT193_FN3),
+	PINMUX_DATA(BBIF2_TSYNC1_MARK, PORT193_FN4),
+	PINMUX_DATA(LCDD2_MARK, PORT194_FN1),
+	PINMUX_DATA(PORT194_KEYOUT2_MARK, PORT194_FN2),
+	PINMUX_DATA(PORT194_SCIFA5_RTS_MARK, PORT194_FN3),
+	PINMUX_DATA(BBIF2_TSCK1_MARK, PORT194_FN4),
+	PINMUX_DATA(LCDD3_MARK, PORT195_FN1),
+	PINMUX_DATA(PORT195_KEYOUT3_MARK, PORT195_FN2),
+	PINMUX_DATA(PORT195_SCIFA5_RXD_MARK, PORT195_FN3),
+	PINMUX_DATA(BBIF2_TXD1_MARK, PORT195_FN4),
+	PINMUX_DATA(LCDD4_MARK, PORT196_FN1),
+	PINMUX_DATA(PORT196_KEYOUT4_MARK, PORT196_FN2),
+	PINMUX_DATA(PORT196_SCIFA5_TXD_MARK, PORT196_FN3),
+	PINMUX_DATA(LCDD5_MARK, PORT197_FN1),
+	PINMUX_DATA(PORT197_KEYOUT5_MARK, PORT197_FN2),
+	PINMUX_DATA(PORT197_SCIFA5_SCK_MARK, PORT197_FN3),
+	PINMUX_DATA(MFG2_OUT2_MARK, PORT197_FN4),
+	PINMUX_DATA(LCDD6_MARK, PORT198_FN1),
+	PINMUX_DATA(LCDD7_MARK, PORT199_FN1),
+	PINMUX_DATA(TPU4TO1_MARK, PORT199_FN2),
+	PINMUX_DATA(MFG4_OUT2_MARK, PORT199_FN3),
+	PINMUX_DATA(LCDD8_MARK, PORT200_FN1),
+	PINMUX_DATA(PORT200_KEYIN0_MARK, PORT200_FN2),
+	PINMUX_DATA(VIO_DR0_MARK, PORT200_FN3),
+	PINMUX_DATA(D16_MARK, PORT200_FN4),
+	PINMUX_DATA(LCDD9_MARK, PORT201_FN1),
+	PINMUX_DATA(PORT201_KEYIN1_MARK, PORT201_FN2),
+	PINMUX_DATA(VIO_DR1_MARK, PORT201_FN3),
+	PINMUX_DATA(D17_MARK, PORT201_FN4),
+	PINMUX_DATA(LCDD10_MARK, PORT202_FN1),
+	PINMUX_DATA(PORT202_KEYIN2_MARK, PORT202_FN2),
+	PINMUX_DATA(VIO_DR2_MARK, PORT202_FN3),
+	PINMUX_DATA(D18_MARK, PORT202_FN4),
+	PINMUX_DATA(LCDD11_MARK, PORT203_FN1),
+	PINMUX_DATA(PORT203_KEYIN3_MARK, PORT203_FN2),
+	PINMUX_DATA(VIO_DR3_MARK, PORT203_FN3),
+	PINMUX_DATA(D19_MARK, PORT203_FN4),
+	PINMUX_DATA(LCDD12_MARK, PORT204_FN1),
+	PINMUX_DATA(PORT204_KEYIN4_MARK, PORT204_FN2),
+	PINMUX_DATA(VIO_DR4_MARK, PORT204_FN3),
+	PINMUX_DATA(D20_MARK, PORT204_FN4),
+	PINMUX_DATA(LCDD13_MARK, PORT205_FN1),
+	PINMUX_DATA(PORT205_KEYIN5_MARK, PORT205_FN2),
+	PINMUX_DATA(VIO_DR5_MARK, PORT205_FN3),
+	PINMUX_DATA(D21_MARK, PORT205_FN4),
+	PINMUX_DATA(LCDD14_MARK, PORT206_FN1),
+	PINMUX_DATA(PORT206_KEYIN6_MARK, PORT206_FN2),
+	PINMUX_DATA(VIO_DR6_MARK, PORT206_FN3),
+	PINMUX_DATA(D22_MARK, PORT206_FN4),
+	PINMUX_DATA(LCDD15_MARK, PORT207_FN1),
+	PINMUX_DATA(PORT207_MSIOF0L_SS1_MARK, PORT207_FN2),
+	PINMUX_DATA(PORT207_KEYOUT0_MARK, PORT207_FN3),
+	PINMUX_DATA(VIO_DR7_MARK, PORT207_FN4),
+	PINMUX_DATA(D23_MARK, PORT207_FN5),
+	PINMUX_DATA(LCDD16_MARK, PORT208_FN1),
+	PINMUX_DATA(PORT208_MSIOF0L_SS2_MARK, PORT208_FN2),
+	PINMUX_DATA(PORT208_KEYOUT1_MARK, PORT208_FN3),
+	PINMUX_DATA(VIO_VDR_MARK, PORT208_FN4),
+	PINMUX_DATA(D24_MARK, PORT208_FN5),
+	PINMUX_DATA(LCDD17_MARK, PORT209_FN1),
+	PINMUX_DATA(PORT209_KEYOUT2_MARK, PORT209_FN2),
+	PINMUX_DATA(VIO_HDR_MARK, PORT209_FN3),
+	PINMUX_DATA(D25_MARK, PORT209_FN4),
+	PINMUX_DATA(LCDD18_MARK, PORT210_FN1),
+	PINMUX_DATA(DREQ2_MARK, PORT210_FN2),
+	PINMUX_DATA(PORT210_MSIOF0L_SS1_MARK, PORT210_FN3),
+	PINMUX_DATA(D26_MARK, PORT210_FN4),
+	PINMUX_DATA(LCDD19_MARK, PORT211_FN1),
+	PINMUX_DATA(PORT211_MSIOF0L_SS2_MARK, PORT211_FN2),
+	PINMUX_DATA(D27_MARK, PORT211_FN3),
+	PINMUX_DATA(LCDD20_MARK, PORT212_FN1),
+	PINMUX_DATA(TS_SPSYNC1_MARK, PORT212_FN2),
+	PINMUX_DATA(MSIOF0L_MCK0_MARK, PORT212_FN3),
+	PINMUX_DATA(D28_MARK, PORT212_FN4),
+	PINMUX_DATA(LCDD21_MARK, PORT213_FN1),
+	PINMUX_DATA(TS_SDAT1_MARK, PORT213_FN2),
+	PINMUX_DATA(MSIOF0L_MCK1_MARK, PORT213_FN3),
+	PINMUX_DATA(D29_MARK, PORT213_FN4),
+	PINMUX_DATA(LCDD22_MARK, PORT214_FN1),
+	PINMUX_DATA(TS_SDEN1_MARK, PORT214_FN2),
+	PINMUX_DATA(MSIOF0L_RSCK_MARK, PORT214_FN3),
+	PINMUX_DATA(D30_MARK, PORT214_FN4),
+	PINMUX_DATA(LCDD23_MARK, PORT215_FN1),
+	PINMUX_DATA(TS_SCK1_MARK, PORT215_FN2),
+	PINMUX_DATA(MSIOF0L_RSYNC_MARK, PORT215_FN3),
+	PINMUX_DATA(D31_MARK, PORT215_FN4),
+	PINMUX_DATA(LCDDCK_MARK, PORT216_FN1),
+	PINMUX_DATA(LCDWR_MARK, PORT216_FN2),
+	PINMUX_DATA(PORT216_KEYOUT3_MARK, PORT216_FN3),
+	PINMUX_DATA(VIO_CLKR_MARK, PORT216_FN4),
+	PINMUX_DATA(LCDRD_MARK, PORT217_FN1),
+	PINMUX_DATA(DACK2_MARK, PORT217_FN2),
+	PINMUX_DATA(MSIOF0L_TSYNC_MARK, PORT217_FN3),
+	PINMUX_DATA(LCDHSYN_MARK, PORT218_FN1),
+	PINMUX_DATA(LCDCS_MARK, PORT218_FN2),
+	PINMUX_DATA(LCDCS2_MARK, PORT218_FN3),
+	PINMUX_DATA(DACK3_MARK, PORT218_FN4),
+	PINMUX_DATA(PORT218_VIO_CKOR_MARK, PORT218_FN5),
+	PINMUX_DATA(PORT218_KEYOUT4_MARK, PORT218_FN6),
+	PINMUX_DATA(LCDDISP_MARK, PORT219_FN1),
+	PINMUX_DATA(LCDRS_MARK, PORT219_FN2),
+	PINMUX_DATA(DREQ3_MARK, PORT219_FN3),
+	PINMUX_DATA(MSIOF0L_TSCK_MARK, PORT219_FN4),
+	PINMUX_DATA(LCDVSYN_MARK, PORT220_FN1),
+	PINMUX_DATA(LCDVSYN2_MARK, PORT220_FN2),
+	PINMUX_DATA(PORT220_KEYOUT5_MARK, PORT220_FN3),
+	PINMUX_DATA(LCDLCLK_MARK, PORT221_FN1),
+	PINMUX_DATA(DREQ1_MARK, PORT221_FN2),
+	PINMUX_DATA(PWEN_MARK, PORT221_FN3),
+	PINMUX_DATA(MSIOF0L_RXD_MARK, PORT221_FN4),
+	PINMUX_DATA(LCDDON_MARK, PORT222_FN1),
+	PINMUX_DATA(LCDDON2_MARK, PORT222_FN2),
+	PINMUX_DATA(DACK1_MARK, PORT222_FN3),
+	PINMUX_DATA(OVCN_MARK, PORT222_FN4),
+	PINMUX_DATA(MSIOF0L_TXD_MARK, PORT222_FN5),
+	PINMUX_DATA(SCIFA1_TXD_MARK, PORT225_FN1),
+	PINMUX_DATA(OVCN2_MARK, PORT225_FN2),
+	PINMUX_DATA(EXTLP_MARK, PORT226_FN1),
+	PINMUX_DATA(SCIFA1_SCK_MARK, PORT226_FN2),
+	PINMUX_DATA(USBTERM_MARK, PORT226_FN3),
+	PINMUX_DATA(PORT226_VIO_CKO2_MARK, PORT226_FN4),
+	PINMUX_DATA(SCIFA1_RTS_MARK, PORT227_FN1),
+	PINMUX_DATA(IDIN_MARK, PORT227_FN2),
+	PINMUX_DATA(SCIFA1_RXD_MARK, PORT228_FN1),
+	PINMUX_DATA(SCIFA1_CTS_MARK, PORT229_FN1),
+	PINMUX_DATA(MFG1_IN1_MARK, PORT229_FN2),
+	PINMUX_DATA(MSIOF1_TXD_MARK, PORT230_FN1),
+	PINMUX_DATA(SCIFA2_TXD2_MARK, PORT230_FN2),
+	PINMUX_DATA(PORT230_FSIAOMC_MARK, PORT230_FN3),
+	PINMUX_DATA(MSIOF1_TSYNC_MARK, PORT231_FN1),
+	PINMUX_DATA(SCIFA2_CTS2_MARK, PORT231_FN2),
+	PINMUX_DATA(PORT231_FSIAOLR_MARK, PORT231_FN3),
+	PINMUX_DATA(MSIOF1_TSCK_MARK, PORT232_FN1),
+	PINMUX_DATA(SCIFA2_SCK2_MARK, PORT232_FN2),
+	PINMUX_DATA(PORT232_FSIAOBT_MARK, PORT232_FN3),
+	PINMUX_DATA(MSIOF1_RXD_MARK, PORT233_FN1),
+	PINMUX_DATA(SCIFA2_RXD2_MARK, PORT233_FN2),
+	PINMUX_DATA(GPS_VCOTRIG_MARK, PORT233_FN3),
+	PINMUX_DATA(PORT233_FSIACK_MARK, PORT233_FN4),
+	PINMUX_DATA(MSIOF1_RSCK_MARK, PORT234_FN1),
+	PINMUX_DATA(SCIFA2_RTS2_MARK, PORT234_FN2),
+	PINMUX_DATA(PORT234_FSIAOSLD_MARK, PORT234_FN3),
+	PINMUX_DATA(MSIOF1_RSYNC_MARK, PORT235_FN1),
+	PINMUX_DATA(OPORT0_MARK, PORT235_FN2),
+	PINMUX_DATA(MFG1_IN2_MARK, PORT235_FN3),
+	PINMUX_DATA(PORT235_FSIAILR_MARK, PORT235_FN4),
+	PINMUX_DATA(MSIOF1_MCK0_MARK, PORT236_FN1),
+	PINMUX_DATA(I2C_SDA2_MARK, PORT236_FN2),
+	PINMUX_DATA(PORT236_FSIAIBT_MARK, PORT236_FN3),
+	PINMUX_DATA(MSIOF1_MCK1_MARK, PORT237_FN1),
+	PINMUX_DATA(I2C_SCL2_MARK, PORT237_FN2),
+	PINMUX_DATA(PORT237_FSIAISLD_MARK, PORT237_FN3),
+	PINMUX_DATA(MSIOF1_SS1_MARK, PORT238_FN1),
+	PINMUX_DATA(EDBGREQ3_MARK, PORT238_FN2),
+
+	/* 55-5 (FN) */
+	PINMUX_DATA(MSIOF1_SS2_MARK, PORT239_FN1),
+	PINMUX_DATA(SCIFA6_TXD_MARK, PORT240_FN1),
+	PINMUX_DATA(PORT241_IRDA_OUT_MARK, PORT241_FN1),
+	PINMUX_DATA(PORT241_IROUT_MARK, PORT241_FN2),
+	PINMUX_DATA(MFG4_OUT1_MARK, PORT241_FN3),
+	PINMUX_DATA(TPU4TO0_MARK, PORT241_FN4),
+	PINMUX_DATA(PORT242_IRDA_IN_MARK, PORT242_FN1),
+	PINMUX_DATA(MFG4_IN2_MARK, PORT242_FN2),
+	PINMUX_DATA(PORT243_IRDA_FIRSEL_MARK, PORT243_FN1),
+	PINMUX_DATA(PORT243_VIO_CKO2_MARK, PORT243_FN2),
+	PINMUX_DATA(PORT244_SCIFA5_CTS_MARK, PORT244_FN1),
+	PINMUX_DATA(MFG2_IN1_MARK, PORT244_FN2),
+	PINMUX_DATA(PORT244_SCIFB_CTS_MARK, PORT244_FN3),
+	PINMUX_DATA(PORT245_SCIFA5_RTS_MARK, PORT245_FN1),
+	PINMUX_DATA(MFG2_IN2_MARK, PORT245_FN2),
+	PINMUX_DATA(PORT245_SCIFB_RTS_MARK, PORT245_FN3),
+	PINMUX_DATA(PORT246_SCIFA5_RXD_MARK, PORT246_FN1),
+	PINMUX_DATA(MFG1_OUT1_MARK, PORT246_FN2),
+	PINMUX_DATA(PORT246_SCIFB_RXD_MARK, PORT246_FN3),
+	PINMUX_DATA(TPU1TO0_MARK, PORT246_FN4),
+	PINMUX_DATA(PORT247_SCIFA5_TXD_MARK, PORT247_FN1),
+	PINMUX_DATA(MFG3_OUT2_MARK, PORT247_FN2),
+	PINMUX_DATA(PORT247_SCIFB_TXD_MARK, PORT247_FN3),
+	PINMUX_DATA(TPU3TO1_MARK, PORT247_FN4),
+	PINMUX_DATA(PORT248_SCIFA5_SCK_MARK, PORT248_FN1),
+	PINMUX_DATA(MFG2_OUT1_MARK, PORT248_FN2),
+	PINMUX_DATA(PORT248_SCIFB_SCK_MARK, PORT248_FN3),
+	PINMUX_DATA(TPU2TO0_MARK, PORT248_FN4),
+	PINMUX_DATA(PORT249_IROUT_MARK, PORT249_FN1),
+	PINMUX_DATA(MFG4_IN1_MARK, PORT249_FN2),
+	PINMUX_DATA(SDHICLK0_MARK, PORT250_FN1),
+	PINMUX_DATA(TCK2_SWCLK_MC0_MARK, PORT250_FN2),
+	PINMUX_DATA(SDHICD0_MARK, PORT251_FN1),
+	PINMUX_DATA(SDHID0_0_MARK, PORT252_FN1),
+	PINMUX_DATA(TMS2_SWDIO_MC0_MARK, PORT252_FN2),
+	PINMUX_DATA(SDHID0_1_MARK, PORT253_FN1),
+	PINMUX_DATA(TDO2_SWO0_MC0_MARK, PORT253_FN2),
+	PINMUX_DATA(SDHID0_2_MARK, PORT254_FN1),
+	PINMUX_DATA(TDI2_MARK, PORT254_FN2),
+	PINMUX_DATA(SDHID0_3_MARK, PORT255_FN1),
+	PINMUX_DATA(RTCK2_SWO1_MC0_MARK, PORT255_FN2),
+	PINMUX_DATA(SDHICMD0_MARK, PORT256_FN1),
+	PINMUX_DATA(TRST2_MARK, PORT256_FN2),
+	PINMUX_DATA(SDHIWP0_MARK, PORT257_FN1),
+	PINMUX_DATA(EDBGREQ2_MARK, PORT257_FN2),
+	PINMUX_DATA(SDHICLK1_MARK, PORT258_FN1),
+	PINMUX_DATA(TCK3_SWCLK_MC1_MARK, PORT258_FN2),
+	PINMUX_DATA(SDHID1_0_MARK, PORT259_FN1),
+	PINMUX_DATA(M11_SLCD_SO2_MARK, PORT259_FN2),
+	PINMUX_DATA(TS_SPSYNC2_MARK, PORT259_FN3),
+	PINMUX_DATA(TMS3_SWDIO_MC1_MARK, PORT259_FN4),
+	PINMUX_DATA(SDHID1_1_MARK, PORT260_FN1),
+	PINMUX_DATA(M9_SLCD_A02_MARK, PORT260_FN2),
+	PINMUX_DATA(TS_SDAT2_MARK, PORT260_FN3),
+	PINMUX_DATA(TDO3_SWO0_MC1_MARK, PORT260_FN4),
+	PINMUX_DATA(SDHID1_2_MARK, PORT261_FN1),
+	PINMUX_DATA(M10_SLCD_CK2_MARK, PORT261_FN2),
+	PINMUX_DATA(TS_SDEN2_MARK, PORT261_FN3),
+	PINMUX_DATA(TDI3_MARK, PORT261_FN4),
+	PINMUX_DATA(SDHID1_3_MARK, PORT262_FN1),
+	PINMUX_DATA(M12_SLCD_CE2_MARK, PORT262_FN2),
+	PINMUX_DATA(TS_SCK2_MARK, PORT262_FN3),
+	PINMUX_DATA(RTCK3_SWO1_MC1_MARK, PORT262_FN4),
+	PINMUX_DATA(SDHICMD1_MARK, PORT263_FN1),
+	PINMUX_DATA(TRST3_MARK, PORT263_FN2),
+	PINMUX_DATA(RESETOUTS_MARK, PORT264_FN1),
+};
+
+#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
+#define GPIO_PORT_265() _265(_GPIO_PORT, , unused)
+#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
+
+static struct pinmux_gpio pinmux_gpios[] = {
+	/* 55-1 -> 55-5 (GPIO) */
+	GPIO_PORT_265(),
+
+	/* Special Pull-up / Pull-down Functions */
+	GPIO_FN(PORT66_KEYIN0_PU), GPIO_FN(PORT67_KEYIN1_PU),
+	GPIO_FN(PORT68_KEYIN2_PU), GPIO_FN(PORT69_KEYIN3_PU),
+	GPIO_FN(PORT70_KEYIN4_PU), GPIO_FN(PORT71_KEYIN5_PU),
+	GPIO_FN(PORT72_KEYIN6_PU),
+
+	/* 55-1 (FN) */
+	GPIO_FN(VBUS_0),
+	GPIO_FN(CPORT0),
+	GPIO_FN(CPORT1),
+	GPIO_FN(CPORT2),
+	GPIO_FN(CPORT3),
+	GPIO_FN(CPORT4),
+	GPIO_FN(CPORT5),
+	GPIO_FN(CPORT6),
+	GPIO_FN(CPORT7),
+	GPIO_FN(CPORT8),
+	GPIO_FN(CPORT9),
+	GPIO_FN(CPORT10),
+	GPIO_FN(CPORT11), GPIO_FN(SIN2),
+	GPIO_FN(CPORT12), GPIO_FN(XCTS2),
+	GPIO_FN(CPORT13), GPIO_FN(RFSPO4),
+	GPIO_FN(CPORT14), GPIO_FN(RFSPO5),
+	GPIO_FN(CPORT15), GPIO_FN(SCIFA0_SCK), GPIO_FN(GPS_AGC2),
+	GPIO_FN(CPORT16), GPIO_FN(SCIFA0_TXD), GPIO_FN(GPS_AGC3),
+	GPIO_FN(CPORT17_IC_OE), GPIO_FN(SOUT2),
+	GPIO_FN(CPORT18), GPIO_FN(XRTS2), GPIO_FN(PORT19_VIO_CKO2),
+	GPIO_FN(CPORT19_MPORT1),
+	GPIO_FN(CPORT20), GPIO_FN(RFSPO6),
+	GPIO_FN(CPORT21), GPIO_FN(STATUS0),
+	GPIO_FN(CPORT22), GPIO_FN(STATUS1),
+	GPIO_FN(CPORT23), GPIO_FN(STATUS2), GPIO_FN(RFSPO7),
+	GPIO_FN(B_SYNLD1),
+	GPIO_FN(B_SYNLD2), GPIO_FN(SYSENMSK),
+	GPIO_FN(XMAINPS),
+	GPIO_FN(XDIVPS),
+	GPIO_FN(XIDRST),
+	GPIO_FN(IDCLK), GPIO_FN(IC_DP),
+	GPIO_FN(IDIO), GPIO_FN(IC_DM),
+	GPIO_FN(SOUT1), GPIO_FN(SCIFA4_TXD), GPIO_FN(M02_BERDAT),
+	GPIO_FN(SIN1), GPIO_FN(SCIFA4_RXD), GPIO_FN(XWUP),
+	GPIO_FN(XRTS1), GPIO_FN(SCIFA4_RTS), GPIO_FN(M03_BERCLK),
+	GPIO_FN(XCTS1), GPIO_FN(SCIFA4_CTS),
+	GPIO_FN(PCMCLKO),
+	GPIO_FN(SYNC8KO),
+
+	/* 55-2 (FN) */
+	GPIO_FN(DNPCM_A),
+	GPIO_FN(UPPCM_A),
+	GPIO_FN(VACK),
+	GPIO_FN(XTALB1L),
+	GPIO_FN(GPS_AGC1), GPIO_FN(SCIFA0_RTS),
+	GPIO_FN(GPS_AGC4), GPIO_FN(SCIFA0_RXD),
+	GPIO_FN(GPS_PWRDOWN), GPIO_FN(SCIFA0_CTS),
+	GPIO_FN(GPS_IM),
+	GPIO_FN(GPS_IS),
+	GPIO_FN(GPS_QM),
+	GPIO_FN(GPS_QS),
+	GPIO_FN(FMSOCK), GPIO_FN(PORT49_IRDA_OUT), GPIO_FN(PORT49_IROUT),
+	GPIO_FN(FMSOOLR), GPIO_FN(BBIF2_TSYNC2), GPIO_FN(TPU2TO2),
+	GPIO_FN(IPORT3), GPIO_FN(FMSIOLR),
+	GPIO_FN(FMSOOBT), GPIO_FN(BBIF2_TSCK2), GPIO_FN(TPU2TO3),
+	GPIO_FN(OPORT1), GPIO_FN(FMSIOBT),
+	GPIO_FN(FMSOSLD), GPIO_FN(BBIF2_TXD2), GPIO_FN(OPORT2),
+	GPIO_FN(FMSOILR), GPIO_FN(PORT53_IRDA_IN), GPIO_FN(TPU3TO3),
+	GPIO_FN(OPORT3), GPIO_FN(FMSIILR),
+	GPIO_FN(FMSOIBT), GPIO_FN(PORT54_IRDA_FIRSEL), GPIO_FN(TPU3TO2),
+	GPIO_FN(FMSIIBT),
+	GPIO_FN(FMSISLD), GPIO_FN(MFG0_OUT1), GPIO_FN(TPU0TO0),
+	GPIO_FN(A0_EA0), GPIO_FN(BS),
+	GPIO_FN(A12_EA12), GPIO_FN(PORT58_VIO_CKOR), GPIO_FN(TPU4TO2),
+	GPIO_FN(A13_EA13), GPIO_FN(PORT59_IROUT), GPIO_FN(MFG0_OUT2),
+	GPIO_FN(TPU0TO1),
+	GPIO_FN(A14_EA14), GPIO_FN(PORT60_KEYOUT5),
+	GPIO_FN(A15_EA15), GPIO_FN(PORT61_KEYOUT4),
+	GPIO_FN(A16_EA16), GPIO_FN(PORT62_KEYOUT3), GPIO_FN(MSIOF0_SS1),
+	GPIO_FN(A17_EA17), GPIO_FN(PORT63_KEYOUT2), GPIO_FN(MSIOF0_TSYNC),
+	GPIO_FN(A18_EA18), GPIO_FN(PORT64_KEYOUT1), GPIO_FN(MSIOF0_TSCK),
+	GPIO_FN(A19_EA19), GPIO_FN(PORT65_KEYOUT0), GPIO_FN(MSIOF0_TXD),
+	GPIO_FN(A20_EA20), GPIO_FN(PORT66_KEYIN0), GPIO_FN(MSIOF0_RSCK),
+	GPIO_FN(A21_EA21), GPIO_FN(PORT67_KEYIN1), GPIO_FN(MSIOF0_RSYNC),
+	GPIO_FN(A22_EA22), GPIO_FN(PORT68_KEYIN2), GPIO_FN(MSIOF0_MCK0),
+	GPIO_FN(A23_EA23), GPIO_FN(PORT69_KEYIN3), GPIO_FN(MSIOF0_MCK1),
+	GPIO_FN(A24_EA24), GPIO_FN(PORT70_KEYIN4), GPIO_FN(MSIOF0_RXD),
+	GPIO_FN(A25_EA25), GPIO_FN(PORT71_KEYIN5), GPIO_FN(MSIOF0_SS2),
+	GPIO_FN(A26), GPIO_FN(PORT72_KEYIN6),
+	GPIO_FN(D0_ED0_NAF0),
+	GPIO_FN(D1_ED1_NAF1),
+	GPIO_FN(D2_ED2_NAF2),
+	GPIO_FN(D3_ED3_NAF3),
+	GPIO_FN(D4_ED4_NAF4),
+	GPIO_FN(D5_ED5_NAF5),
+	GPIO_FN(D6_ED6_NAF6),
+	GPIO_FN(D7_ED7_NAF7),
+	GPIO_FN(D8_ED8_NAF8),
+	GPIO_FN(D9_ED9_NAF9),
+	GPIO_FN(D10_ED10_NAF10),
+	GPIO_FN(D11_ED11_NAF11),
+	GPIO_FN(D12_ED12_NAF12),
+	GPIO_FN(D13_ED13_NAF13),
+	GPIO_FN(D14_ED14_NAF14),
+	GPIO_FN(D15_ED15_NAF15),
+	GPIO_FN(CS4),
+	GPIO_FN(CS5A), GPIO_FN(FMSICK),
+
+	/* 55-3 (FN) */
+	GPIO_FN(CS5B), GPIO_FN(FCE1),
+	GPIO_FN(CS6B), GPIO_FN(XCS2), GPIO_FN(CS6A), GPIO_FN(DACK0),
+	GPIO_FN(FCE0),
+	GPIO_FN(WAIT), GPIO_FN(DREQ0),
+	GPIO_FN(RD_XRD),
+	GPIO_FN(WE0_XWR0_FWE),
+	GPIO_FN(WE1_XWR1),
+	GPIO_FN(FRB),
+	GPIO_FN(CKO),
+	GPIO_FN(NBRSTOUT),
+	GPIO_FN(NBRST),
+	GPIO_FN(GPS_EPPSIN),
+	GPIO_FN(LATCHPULSE),
+	GPIO_FN(LTESIGNAL),
+	GPIO_FN(LEGACYSTATE),
+	GPIO_FN(TCKON),
+	GPIO_FN(VIO_VD), GPIO_FN(PORT128_KEYOUT0), GPIO_FN(IPORT0),
+	GPIO_FN(VIO_HD), GPIO_FN(PORT129_KEYOUT1), GPIO_FN(IPORT1),
+	GPIO_FN(VIO_D0), GPIO_FN(PORT130_KEYOUT2), GPIO_FN(PORT130_MSIOF2_RXD),
+	GPIO_FN(VIO_D1), GPIO_FN(PORT131_KEYOUT3), GPIO_FN(PORT131_MSIOF2_SS1),
+	GPIO_FN(VIO_D2), GPIO_FN(PORT132_KEYOUT4), GPIO_FN(PORT132_MSIOF2_SS2),
+	GPIO_FN(VIO_D3), GPIO_FN(PORT133_KEYOUT5),
+	GPIO_FN(PORT133_MSIOF2_TSYNC),
+	GPIO_FN(VIO_D4), GPIO_FN(PORT134_KEYIN0), GPIO_FN(PORT134_MSIOF2_TXD),
+	GPIO_FN(VIO_D5), GPIO_FN(PORT135_KEYIN1), GPIO_FN(PORT135_MSIOF2_TSCK),
+	GPIO_FN(VIO_D6), GPIO_FN(PORT136_KEYIN2),
+	GPIO_FN(VIO_D7), GPIO_FN(PORT137_KEYIN3),
+	GPIO_FN(VIO_D8), GPIO_FN(M9_SLCD_A01), GPIO_FN(PORT138_FSIAOMC),
+	GPIO_FN(VIO_D9), GPIO_FN(M10_SLCD_CK1), GPIO_FN(PORT139_FSIAOLR),
+	GPIO_FN(VIO_D10), GPIO_FN(M11_SLCD_SO1), GPIO_FN(TPU0TO2),
+	GPIO_FN(PORT140_FSIAOBT),
+	GPIO_FN(VIO_D11), GPIO_FN(M12_SLCD_CE1), GPIO_FN(TPU0TO3),
+	GPIO_FN(PORT141_FSIAOSLD),
+	GPIO_FN(VIO_D12), GPIO_FN(M13_BSW), GPIO_FN(PORT142_FSIACK),
+	GPIO_FN(VIO_D13), GPIO_FN(M14_GSW), GPIO_FN(PORT143_FSIAILR),
+	GPIO_FN(VIO_D14), GPIO_FN(M15_RSW), GPIO_FN(PORT144_FSIAIBT),
+	GPIO_FN(VIO_D15), GPIO_FN(TPU1TO3), GPIO_FN(PORT145_FSIAISLD),
+	GPIO_FN(VIO_CLK), GPIO_FN(PORT146_KEYIN4), GPIO_FN(IPORT2),
+	GPIO_FN(VIO_FIELD), GPIO_FN(PORT147_KEYIN5),
+	GPIO_FN(VIO_CKO), GPIO_FN(PORT148_KEYIN6),
+	GPIO_FN(A27), GPIO_FN(RDWR_XWE), GPIO_FN(MFG0_IN1),
+	GPIO_FN(MFG0_IN2),
+	GPIO_FN(TS_SPSYNC3), GPIO_FN(MSIOF2_RSCK),
+	GPIO_FN(TS_SDAT3), GPIO_FN(MSIOF2_RSYNC),
+	GPIO_FN(TPU1TO2), GPIO_FN(TS_SDEN3), GPIO_FN(PORT153_MSIOF2_SS1),
+	GPIO_FN(SOUT3), GPIO_FN(SCIFA2_TXD1), GPIO_FN(MSIOF2_MCK0),
+	GPIO_FN(SIN3), GPIO_FN(SCIFA2_RXD1), GPIO_FN(MSIOF2_MCK1),
+	GPIO_FN(XRTS3), GPIO_FN(SCIFA2_RTS1), GPIO_FN(PORT156_MSIOF2_SS2),
+	GPIO_FN(XCTS3), GPIO_FN(SCIFA2_CTS1), GPIO_FN(PORT157_MSIOF2_RXD),
+
+	/* 55-4 (FN) */
+	GPIO_FN(DINT), GPIO_FN(SCIFA2_SCK1), GPIO_FN(TS_SCK3),
+	GPIO_FN(PORT159_SCIFB_SCK), GPIO_FN(PORT159_SCIFA5_SCK), GPIO_FN(NMI),
+	GPIO_FN(PORT160_SCIFB_TXD), GPIO_FN(PORT160_SCIFA5_TXD), GPIO_FN(SOUT0),
+	GPIO_FN(PORT161_SCIFB_CTS), GPIO_FN(PORT161_SCIFA5_CTS), GPIO_FN(XCTS0),
+	GPIO_FN(MFG3_IN2),
+	GPIO_FN(PORT162_SCIFB_RXD), GPIO_FN(PORT162_SCIFA5_RXD), GPIO_FN(SIN0),
+	GPIO_FN(MFG3_IN1),
+	GPIO_FN(PORT163_SCIFB_RTS), GPIO_FN(PORT163_SCIFA5_RTS), GPIO_FN(XRTS0),
+	GPIO_FN(MFG3_OUT1), GPIO_FN(TPU3TO0),
+	GPIO_FN(LCDD0), GPIO_FN(PORT192_KEYOUT0), GPIO_FN(EXT_CKI),
+	GPIO_FN(LCDD1), GPIO_FN(PORT193_KEYOUT1), GPIO_FN(PORT193_SCIFA5_CTS),
+	GPIO_FN(BBIF2_TSYNC1),
+	GPIO_FN(LCDD2), GPIO_FN(PORT194_KEYOUT2), GPIO_FN(PORT194_SCIFA5_RTS),
+	GPIO_FN(BBIF2_TSCK1),
+	GPIO_FN(LCDD3), GPIO_FN(PORT195_KEYOUT3), GPIO_FN(PORT195_SCIFA5_RXD),
+	GPIO_FN(BBIF2_TXD1),
+	GPIO_FN(LCDD4), GPIO_FN(PORT196_KEYOUT4), GPIO_FN(PORT196_SCIFA5_TXD),
+	GPIO_FN(LCDD5), GPIO_FN(PORT197_KEYOUT5), GPIO_FN(PORT197_SCIFA5_SCK),
+	GPIO_FN(MFG2_OUT2),
+	GPIO_FN(LCDD6),
+	GPIO_FN(LCDD7), GPIO_FN(TPU4TO1), GPIO_FN(MFG4_OUT2),
+	GPIO_FN(LCDD8), GPIO_FN(PORT200_KEYIN0), GPIO_FN(VIO_DR0),
+	GPIO_FN(D16),
+	GPIO_FN(LCDD9), GPIO_FN(PORT201_KEYIN1), GPIO_FN(VIO_DR1),
+	GPIO_FN(D17),
+	GPIO_FN(LCDD10), GPIO_FN(PORT202_KEYIN2), GPIO_FN(VIO_DR2),
+	GPIO_FN(D18),
+	GPIO_FN(LCDD11), GPIO_FN(PORT203_KEYIN3), GPIO_FN(VIO_DR3),
+	GPIO_FN(D19),
+	GPIO_FN(LCDD12), GPIO_FN(PORT204_KEYIN4), GPIO_FN(VIO_DR4),
+	GPIO_FN(D20),
+	GPIO_FN(LCDD13), GPIO_FN(PORT205_KEYIN5), GPIO_FN(VIO_DR5),
+	GPIO_FN(D21),
+	GPIO_FN(LCDD14), GPIO_FN(PORT206_KEYIN6), GPIO_FN(VIO_DR6),
+	GPIO_FN(D22),
+	GPIO_FN(LCDD15), GPIO_FN(PORT207_MSIOF0L_SS1), GPIO_FN(PORT207_KEYOUT0),
+	GPIO_FN(VIO_DR7), GPIO_FN(D23),
+	GPIO_FN(LCDD16), GPIO_FN(PORT208_MSIOF0L_SS2), GPIO_FN(PORT208_KEYOUT1),
+	GPIO_FN(VIO_VDR), GPIO_FN(D24),
+	GPIO_FN(LCDD17), GPIO_FN(PORT209_KEYOUT2), GPIO_FN(VIO_HDR),
+	GPIO_FN(D25),
+	GPIO_FN(LCDD18), GPIO_FN(DREQ2), GPIO_FN(PORT210_MSIOF0L_SS1),
+	GPIO_FN(D26),
+	GPIO_FN(LCDD19), GPIO_FN(PORT211_MSIOF0L_SS2), GPIO_FN(D27),
+	GPIO_FN(LCDD20), GPIO_FN(TS_SPSYNC1), GPIO_FN(MSIOF0L_MCK0),
+	GPIO_FN(D28),
+	GPIO_FN(LCDD21), GPIO_FN(TS_SDAT1), GPIO_FN(MSIOF0L_MCK1),
+	GPIO_FN(D29),
+	GPIO_FN(LCDD22), GPIO_FN(TS_SDEN1), GPIO_FN(MSIOF0L_RSCK),
+	GPIO_FN(D30),
+	GPIO_FN(LCDD23), GPIO_FN(TS_SCK1), GPIO_FN(MSIOF0L_RSYNC),
+	GPIO_FN(D31),
+	GPIO_FN(LCDDCK), GPIO_FN(LCDWR), GPIO_FN(PORT216_KEYOUT3),
+	GPIO_FN(VIO_CLKR),
+	GPIO_FN(LCDRD), GPIO_FN(DACK2), GPIO_FN(MSIOF0L_TSYNC),
+	GPIO_FN(LCDHSYN), GPIO_FN(LCDCS), GPIO_FN(LCDCS2), GPIO_FN(DACK3),
+	GPIO_FN(PORT218_VIO_CKOR), GPIO_FN(PORT218_KEYOUT4),
+	GPIO_FN(LCDDISP), GPIO_FN(LCDRS), GPIO_FN(DREQ3), GPIO_FN(MSIOF0L_TSCK),
+	GPIO_FN(LCDVSYN), GPIO_FN(LCDVSYN2), GPIO_FN(PORT220_KEYOUT5),
+	GPIO_FN(LCDLCLK), GPIO_FN(DREQ1), GPIO_FN(PWEN), GPIO_FN(MSIOF0L_RXD),
+	GPIO_FN(LCDDON), GPIO_FN(LCDDON2), GPIO_FN(DACK1), GPIO_FN(OVCN),
+	GPIO_FN(MSIOF0L_TXD),
+	GPIO_FN(SCIFA1_TXD), GPIO_FN(OVCN2),
+	GPIO_FN(EXTLP), GPIO_FN(SCIFA1_SCK), GPIO_FN(USBTERM),
+	GPIO_FN(PORT226_VIO_CKO2),
+	GPIO_FN(SCIFA1_RTS), GPIO_FN(IDIN),
+	GPIO_FN(SCIFA1_RXD),
+	GPIO_FN(SCIFA1_CTS), GPIO_FN(MFG1_IN1),
+	GPIO_FN(MSIOF1_TXD), GPIO_FN(SCIFA2_TXD2), GPIO_FN(PORT230_FSIAOMC),
+	GPIO_FN(MSIOF1_TSYNC), GPIO_FN(SCIFA2_CTS2), GPIO_FN(PORT231_FSIAOLR),
+	GPIO_FN(MSIOF1_TSCK), GPIO_FN(SCIFA2_SCK2), GPIO_FN(PORT232_FSIAOBT),
+	GPIO_FN(MSIOF1_RXD), GPIO_FN(SCIFA2_RXD2), GPIO_FN(GPS_VCOTRIG),
+	GPIO_FN(PORT233_FSIACK),
+	GPIO_FN(MSIOF1_RSCK), GPIO_FN(SCIFA2_RTS2), GPIO_FN(PORT234_FSIAOSLD),
+	GPIO_FN(MSIOF1_RSYNC), GPIO_FN(OPORT0), GPIO_FN(MFG1_IN2),
+	GPIO_FN(PORT235_FSIAILR),
+	GPIO_FN(MSIOF1_MCK0), GPIO_FN(I2C_SDA2), GPIO_FN(PORT236_FSIAIBT),
+	GPIO_FN(MSIOF1_MCK1), GPIO_FN(I2C_SCL2), GPIO_FN(PORT237_FSIAISLD),
+	GPIO_FN(MSIOF1_SS1), GPIO_FN(EDBGREQ3),
+
+	/* 55-5 (FN) */
+	GPIO_FN(MSIOF1_SS2),
+	GPIO_FN(SCIFA6_TXD),
+	GPIO_FN(PORT241_IRDA_OUT), GPIO_FN(PORT241_IROUT), GPIO_FN(MFG4_OUT1),
+	GPIO_FN(TPU4TO0),
+	GPIO_FN(PORT242_IRDA_IN), GPIO_FN(MFG4_IN2),
+	GPIO_FN(PORT243_IRDA_FIRSEL), GPIO_FN(PORT243_VIO_CKO2),
+	GPIO_FN(PORT244_SCIFA5_CTS), GPIO_FN(MFG2_IN1),
+	GPIO_FN(PORT244_SCIFB_CTS),
+	GPIO_FN(PORT245_SCIFA5_RTS), GPIO_FN(MFG2_IN2),
+	GPIO_FN(PORT245_SCIFB_RTS),
+	GPIO_FN(PORT246_SCIFA5_RXD), GPIO_FN(MFG1_OUT1),
+	GPIO_FN(PORT246_SCIFB_RXD), GPIO_FN(TPU1TO0),
+	GPIO_FN(PORT247_SCIFA5_TXD), GPIO_FN(MFG3_OUT2),
+	GPIO_FN(PORT247_SCIFB_TXD), GPIO_FN(TPU3TO1),
+	GPIO_FN(PORT248_SCIFA5_SCK), GPIO_FN(MFG2_OUT1),
+	GPIO_FN(PORT248_SCIFB_SCK), GPIO_FN(TPU2TO0),
+	GPIO_FN(PORT249_IROUT), GPIO_FN(MFG4_IN1),
+	GPIO_FN(SDHICLK0), GPIO_FN(TCK2_SWCLK_MC0),
+	GPIO_FN(SDHICD0),
+	GPIO_FN(SDHID0_0), GPIO_FN(TMS2_SWDIO_MC0),
+	GPIO_FN(SDHID0_1), GPIO_FN(TDO2_SWO0_MC0),
+	GPIO_FN(SDHID0_2), GPIO_FN(TDI2),
+	GPIO_FN(SDHID0_3), GPIO_FN(RTCK2_SWO1_MC0),
+	GPIO_FN(SDHICMD0), GPIO_FN(TRST2),
+	GPIO_FN(SDHIWP0), GPIO_FN(EDBGREQ2),
+	GPIO_FN(SDHICLK1), GPIO_FN(TCK3_SWCLK_MC1),
+	GPIO_FN(SDHID1_0), GPIO_FN(M11_SLCD_SO2), GPIO_FN(TS_SPSYNC2),
+	GPIO_FN(TMS3_SWDIO_MC1),
+	GPIO_FN(SDHID1_1), GPIO_FN(M9_SLCD_A02), GPIO_FN(TS_SDAT2),
+	GPIO_FN(TDO3_SWO0_MC1),
+	GPIO_FN(SDHID1_2), GPIO_FN(M10_SLCD_CK2), GPIO_FN(TS_SDEN2),
+	GPIO_FN(TDI3),
+	GPIO_FN(SDHID1_3), GPIO_FN(M12_SLCD_CE2), GPIO_FN(TS_SCK2),
+	GPIO_FN(RTCK3_SWO1_MC1),
+	GPIO_FN(SDHICMD1), GPIO_FN(TRST3),
+	GPIO_FN(RESETOUTS),
+};
+
+/* helper for top 4 bits in PORTnCR */
+#define PCRH(in, in_pd, in_pu, out)	\
+	0, (out), (in), 0,	\
+		0, 0, 0, 0,	\
+		0, 0, (in_pd), 0,	\
+		0, 0, (in_pu), 0
+
+#define PORTCR(nr, reg)	\
+	{ PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) {	\
+			PCRH(PORT##nr##_IN, PORT##nr##_IN_PD,	\
+				 PORT##nr##_IN_PU, PORT##nr##_OUT),	\
+				PORT##nr##_FN0, PORT##nr##_FN1,	\
+				PORT##nr##_FN2, PORT##nr##_FN3,	\
+				PORT##nr##_FN4, PORT##nr##_FN5,	\
+				PORT##nr##_FN6, PORT##nr##_FN7 }	\
+	}
+
+static struct pinmux_cfg_reg pinmux_config_regs[] = {
+	PORTCR(0, 0xe6050000), /* PORT0CR */
+	PORTCR(1, 0xe6050001), /* PORT1CR */
+	PORTCR(2, 0xe6050002), /* PORT2CR */
+	PORTCR(3, 0xe6050003), /* PORT3CR */
+	PORTCR(4, 0xe6050004), /* PORT4CR */
+	PORTCR(5, 0xe6050005), /* PORT5CR */
+	PORTCR(6, 0xe6050006), /* PORT6CR */
+	PORTCR(7, 0xe6050007), /* PORT7CR */
+	PORTCR(8, 0xe6050008), /* PORT8CR */
+	PORTCR(9, 0xe6050009), /* PORT9CR */
+
+	PORTCR(10, 0xe605000a), /* PORT10CR */
+	PORTCR(11, 0xe605000b), /* PORT11CR */
+	PORTCR(12, 0xe605000c), /* PORT12CR */
+	PORTCR(13, 0xe605000d), /* PORT13CR */
+	PORTCR(14, 0xe605000e), /* PORT14CR */
+	PORTCR(15, 0xe605000f), /* PORT15CR */
+	PORTCR(16, 0xe6050010), /* PORT16CR */
+	PORTCR(17, 0xe6050011), /* PORT17CR */
+	PORTCR(18, 0xe6050012), /* PORT18CR */
+	PORTCR(19, 0xe6050013), /* PORT19CR */
+
+	PORTCR(20, 0xe6050014), /* PORT20CR */
+	PORTCR(21, 0xe6050015), /* PORT21CR */
+	PORTCR(22, 0xe6050016), /* PORT22CR */
+	PORTCR(23, 0xe6050017), /* PORT23CR */
+	PORTCR(24, 0xe6050018), /* PORT24CR */
+	PORTCR(25, 0xe6050019), /* PORT25CR */
+	PORTCR(26, 0xe605001a), /* PORT26CR */
+	PORTCR(27, 0xe605001b), /* PORT27CR */
+	PORTCR(28, 0xe605001c), /* PORT28CR */
+	PORTCR(29, 0xe605001d), /* PORT29CR */
+
+	PORTCR(30, 0xe605001e), /* PORT30CR */
+	PORTCR(31, 0xe605001f), /* PORT31CR */
+	PORTCR(32, 0xe6050020), /* PORT32CR */
+	PORTCR(33, 0xe6050021), /* PORT33CR */
+	PORTCR(34, 0xe6050022), /* PORT34CR */
+	PORTCR(35, 0xe6050023), /* PORT35CR */
+	PORTCR(36, 0xe6050024), /* PORT36CR */
+	PORTCR(37, 0xe6050025), /* PORT37CR */
+	PORTCR(38, 0xe6050026), /* PORT38CR */
+	PORTCR(39, 0xe6050027), /* PORT39CR */
+
+	PORTCR(40, 0xe6050028), /* PORT40CR */
+	PORTCR(41, 0xe6050029), /* PORT41CR */
+	PORTCR(42, 0xe605002a), /* PORT42CR */
+	PORTCR(43, 0xe605002b), /* PORT43CR */
+	PORTCR(44, 0xe605002c), /* PORT44CR */
+	PORTCR(45, 0xe605002d), /* PORT45CR */
+	PORTCR(46, 0xe605002e), /* PORT46CR */
+	PORTCR(47, 0xe605002f), /* PORT47CR */
+	PORTCR(48, 0xe6050030), /* PORT48CR */
+	PORTCR(49, 0xe6050031), /* PORT49CR */
+
+	PORTCR(50, 0xe6050032), /* PORT50CR */
+	PORTCR(51, 0xe6050033), /* PORT51CR */
+	PORTCR(52, 0xe6050034), /* PORT52CR */
+	PORTCR(53, 0xe6050035), /* PORT53CR */
+	PORTCR(54, 0xe6050036), /* PORT54CR */
+	PORTCR(55, 0xe6050037), /* PORT55CR */
+	PORTCR(56, 0xe6050038), /* PORT56CR */
+	PORTCR(57, 0xe6050039), /* PORT57CR */
+	PORTCR(58, 0xe605003a), /* PORT58CR */
+	PORTCR(59, 0xe605003b), /* PORT59CR */
+
+	PORTCR(60, 0xe605003c), /* PORT60CR */
+	PORTCR(61, 0xe605003d), /* PORT61CR */
+	PORTCR(62, 0xe605003e), /* PORT62CR */
+	PORTCR(63, 0xe605003f), /* PORT63CR */
+	PORTCR(64, 0xe6050040), /* PORT64CR */
+	PORTCR(65, 0xe6050041), /* PORT65CR */
+	PORTCR(66, 0xe6050042), /* PORT66CR */
+	PORTCR(67, 0xe6050043), /* PORT67CR */
+	PORTCR(68, 0xe6050044), /* PORT68CR */
+	PORTCR(69, 0xe6050045), /* PORT69CR */
+
+	PORTCR(70, 0xe6050046), /* PORT70CR */
+	PORTCR(71, 0xe6050047), /* PORT71CR */
+	PORTCR(72, 0xe6050048), /* PORT72CR */
+	PORTCR(73, 0xe6050049), /* PORT73CR */
+	PORTCR(74, 0xe605004a), /* PORT74CR */
+	PORTCR(75, 0xe605004b), /* PORT75CR */
+	PORTCR(76, 0xe605004c), /* PORT76CR */
+	PORTCR(77, 0xe605004d), /* PORT77CR */
+	PORTCR(78, 0xe605004e), /* PORT78CR */
+	PORTCR(79, 0xe605004f), /* PORT79CR */
+
+	PORTCR(80, 0xe6050050), /* PORT80CR */
+	PORTCR(81, 0xe6050051), /* PORT81CR */
+	PORTCR(82, 0xe6050052), /* PORT82CR */
+	PORTCR(83, 0xe6050053), /* PORT83CR */
+	PORTCR(84, 0xe6050054), /* PORT84CR */
+	PORTCR(85, 0xe6050055), /* PORT85CR */
+	PORTCR(86, 0xe6050056), /* PORT86CR */
+	PORTCR(87, 0xe6050057), /* PORT87CR */
+	PORTCR(88, 0xe6050058), /* PORT88CR */
+	PORTCR(89, 0xe6050059), /* PORT89CR */
+
+	PORTCR(90, 0xe605005a), /* PORT90CR */
+	PORTCR(91, 0xe605005b), /* PORT91CR */
+	PORTCR(92, 0xe605005c), /* PORT92CR */
+	PORTCR(93, 0xe605005d), /* PORT93CR */
+	PORTCR(94, 0xe605005e), /* PORT94CR */
+	PORTCR(95, 0xe605005f), /* PORT95CR */
+	PORTCR(96, 0xe6050060), /* PORT96CR */
+	PORTCR(97, 0xe6050061), /* PORT97CR */
+	PORTCR(98, 0xe6050062), /* PORT98CR */
+	PORTCR(99, 0xe6050063), /* PORT99CR */
+
+	PORTCR(100, 0xe6050064), /* PORT100CR */
+	PORTCR(101, 0xe6050065), /* PORT101CR */
+	PORTCR(102, 0xe6050066), /* PORT102CR */
+	PORTCR(103, 0xe6050067), /* PORT103CR */
+	PORTCR(104, 0xe6050068), /* PORT104CR */
+	PORTCR(105, 0xe6050069), /* PORT105CR */
+	PORTCR(106, 0xe605006a), /* PORT106CR */
+	PORTCR(107, 0xe605006b), /* PORT107CR */
+	PORTCR(108, 0xe605006c), /* PORT108CR */
+	PORTCR(109, 0xe605006d), /* PORT109CR */
+
+	PORTCR(110, 0xe605006e), /* PORT110CR */
+	PORTCR(111, 0xe605006f), /* PORT111CR */
+	PORTCR(112, 0xe6050070), /* PORT112CR */
+	PORTCR(113, 0xe6050071), /* PORT113CR */
+	PORTCR(114, 0xe6050072), /* PORT114CR */
+	PORTCR(115, 0xe6050073), /* PORT115CR */
+	PORTCR(116, 0xe6050074), /* PORT116CR */
+	PORTCR(117, 0xe6050075), /* PORT117CR */
+	PORTCR(118, 0xe6050076), /* PORT118CR */
+
+	PORTCR(128, 0xe6051080), /* PORT128CR */
+	PORTCR(129, 0xe6051081), /* PORT129CR */
+
+	PORTCR(130, 0xe6051082), /* PORT130CR */
+	PORTCR(131, 0xe6051083), /* PORT131CR */
+	PORTCR(132, 0xe6051084), /* PORT132CR */
+	PORTCR(133, 0xe6051085), /* PORT133CR */
+	PORTCR(134, 0xe6051086), /* PORT134CR */
+	PORTCR(135, 0xe6051087), /* PORT135CR */
+	PORTCR(136, 0xe6051088), /* PORT136CR */
+	PORTCR(137, 0xe6051089), /* PORT137CR */
+	PORTCR(138, 0xe605108a), /* PORT138CR */
+	PORTCR(139, 0xe605108b), /* PORT139CR */
+
+	PORTCR(140, 0xe605108c), /* PORT140CR */
+	PORTCR(141, 0xe605108d), /* PORT141CR */
+	PORTCR(142, 0xe605108e), /* PORT142CR */
+	PORTCR(143, 0xe605108f), /* PORT143CR */
+	PORTCR(144, 0xe6051090), /* PORT144CR */
+	PORTCR(145, 0xe6051091), /* PORT145CR */
+	PORTCR(146, 0xe6051092), /* PORT146CR */
+	PORTCR(147, 0xe6051093), /* PORT147CR */
+	PORTCR(148, 0xe6051094), /* PORT148CR */
+	PORTCR(149, 0xe6051095), /* PORT149CR */
+
+	PORTCR(150, 0xe6051096), /* PORT150CR */
+	PORTCR(151, 0xe6051097), /* PORT151CR */
+	PORTCR(152, 0xe6051098), /* PORT152CR */
+	PORTCR(153, 0xe6051099), /* PORT153CR */
+	PORTCR(154, 0xe605109a), /* PORT154CR */
+	PORTCR(155, 0xe605109b), /* PORT155CR */
+	PORTCR(156, 0xe605109c), /* PORT156CR */
+	PORTCR(157, 0xe605109d), /* PORT157CR */
+	PORTCR(158, 0xe605109e), /* PORT158CR */
+	PORTCR(159, 0xe605109f), /* PORT159CR */
+
+	PORTCR(160, 0xe60510a0), /* PORT160CR */
+	PORTCR(161, 0xe60510a1), /* PORT161CR */
+	PORTCR(162, 0xe60510a2), /* PORT162CR */
+	PORTCR(163, 0xe60510a3), /* PORT163CR */
+	PORTCR(164, 0xe60510a4), /* PORT164CR */
+
+	PORTCR(192, 0xe60520c0), /* PORT192CR */
+	PORTCR(193, 0xe60520c1), /* PORT193CR */
+	PORTCR(194, 0xe60520c2), /* PORT194CR */
+	PORTCR(195, 0xe60520c3), /* PORT195CR */
+	PORTCR(196, 0xe60520c4), /* PORT196CR */
+	PORTCR(197, 0xe60520c5), /* PORT197CR */
+	PORTCR(198, 0xe60520c6), /* PORT198CR */
+	PORTCR(199, 0xe60520c7), /* PORT199CR */
+
+	PORTCR(200, 0xe60520c8), /* PORT200CR */
+	PORTCR(201, 0xe60520c9), /* PORT201CR */
+	PORTCR(202, 0xe60520ca), /* PORT202CR */
+	PORTCR(203, 0xe60520cb), /* PORT203CR */
+	PORTCR(204, 0xe60520cc), /* PORT204CR */
+	PORTCR(205, 0xe60520cd), /* PORT205CR */
+	PORTCR(206, 0xe60520ce), /* PORT206CR */
+	PORTCR(207, 0xe60520cf), /* PORT207CR */
+	PORTCR(208, 0xe60520d0), /* PORT208CR */
+	PORTCR(209, 0xe60520d1), /* PORT209CR */
+
+	PORTCR(210, 0xe60520d2), /* PORT210CR */
+	PORTCR(211, 0xe60520d3), /* PORT211CR */
+	PORTCR(212, 0xe60520d4), /* PORT212CR */
+	PORTCR(213, 0xe60520d5), /* PORT213CR */
+	PORTCR(214, 0xe60520d6), /* PORT214CR */
+	PORTCR(215, 0xe60520d7), /* PORT215CR */
+	PORTCR(216, 0xe60520d8), /* PORT216CR */
+	PORTCR(217, 0xe60520d9), /* PORT217CR */
+	PORTCR(218, 0xe60520da), /* PORT218CR */
+	PORTCR(219, 0xe60520db), /* PORT219CR */
+
+	PORTCR(220, 0xe60520dc), /* PORT220CR */
+	PORTCR(221, 0xe60520dd), /* PORT221CR */
+	PORTCR(222, 0xe60520de), /* PORT222CR */
+	PORTCR(223, 0xe60520df), /* PORT223CR */
+	PORTCR(224, 0xe60520e0), /* PORT224CR */
+	PORTCR(225, 0xe60520e1), /* PORT225CR */
+	PORTCR(226, 0xe60520e2), /* PORT226CR */
+	PORTCR(227, 0xe60520e3), /* PORT227CR */
+	PORTCR(228, 0xe60520e4), /* PORT228CR */
+	PORTCR(229, 0xe60520e5), /* PORT229CR */
+
+	PORTCR(230, 0xe60520e6), /* PORT230CR */
+	PORTCR(231, 0xe60520e7), /* PORT231CR */
+	PORTCR(232, 0xe60520e8), /* PORT232CR */
+	PORTCR(233, 0xe60520e9), /* PORT233CR */
+	PORTCR(234, 0xe60520ea), /* PORT234CR */
+	PORTCR(235, 0xe60520eb), /* PORT235CR */
+	PORTCR(236, 0xe60520ec), /* PORT236CR */
+	PORTCR(237, 0xe60520ed), /* PORT237CR */
+	PORTCR(238, 0xe60520ee), /* PORT238CR */
+	PORTCR(239, 0xe60520ef), /* PORT239CR */
+
+	PORTCR(240, 0xe60520f0), /* PORT240CR */
+	PORTCR(241, 0xe60520f1), /* PORT241CR */
+	PORTCR(242, 0xe60520f2), /* PORT242CR */
+	PORTCR(243, 0xe60520f3), /* PORT243CR */
+	PORTCR(244, 0xe60520f4), /* PORT244CR */
+	PORTCR(245, 0xe60520f5), /* PORT245CR */
+	PORTCR(246, 0xe60520f6), /* PORT246CR */
+	PORTCR(247, 0xe60520f7), /* PORT247CR */
+	PORTCR(248, 0xe60520f8), /* PORT248CR */
+	PORTCR(249, 0xe60520f9), /* PORT249CR */
+
+	PORTCR(250, 0xe60520fa), /* PORT250CR */
+	PORTCR(251, 0xe60520fb), /* PORT251CR */
+	PORTCR(252, 0xe60520fc), /* PORT252CR */
+	PORTCR(253, 0xe60520fd), /* PORT253CR */
+	PORTCR(254, 0xe60520fe), /* PORT254CR */
+	PORTCR(255, 0xe60520ff), /* PORT255CR */
+	PORTCR(256, 0xe6052100), /* PORT256CR */
+	PORTCR(257, 0xe6052101), /* PORT257CR */
+	PORTCR(258, 0xe6052102), /* PORT258CR */
+	PORTCR(259, 0xe6052103), /* PORT259CR */
+
+	PORTCR(260, 0xe6052104), /* PORT260CR */
+	PORTCR(261, 0xe6052105), /* PORT261CR */
+	PORTCR(262, 0xe6052106), /* PORT262CR */
+	PORTCR(263, 0xe6052107), /* PORT263CR */
+	PORTCR(264, 0xe6052108), /* PORT264CR */
+
+	{ PINMUX_CFG_REG("MSELBCR", 0xe6058024, 32, 1) {
+			0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+			0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+			MSELBCR_MSEL17_0, MSELBCR_MSEL17_1,
+			MSELBCR_MSEL16_0, MSELBCR_MSEL16_1,
+			0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+			0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }
+	},
+	{ },
+};
+
+static struct pinmux_data_reg pinmux_data_regs[] = {
+	{ PINMUX_DATA_REG("PORTL031_000DR", 0xe6054000, 32) {
+			PORT31_DATA, PORT30_DATA, PORT29_DATA, PORT28_DATA,
+			PORT27_DATA, PORT26_DATA, PORT25_DATA, PORT24_DATA,
+			PORT23_DATA, PORT22_DATA, PORT21_DATA, PORT20_DATA,
+			PORT19_DATA, PORT18_DATA, PORT17_DATA, PORT16_DATA,
+			PORT15_DATA, PORT14_DATA, PORT13_DATA, PORT12_DATA,
+			PORT11_DATA, PORT10_DATA, PORT9_DATA, PORT8_DATA,
+			PORT7_DATA, PORT6_DATA, PORT5_DATA, PORT4_DATA,
+			PORT3_DATA, PORT2_DATA, PORT1_DATA, PORT0_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTL063_032DR", 0xe6054004, 32) {
+			PORT63_DATA, PORT62_DATA, PORT61_DATA, PORT60_DATA,
+			PORT59_DATA, PORT58_DATA, PORT57_DATA, PORT56_DATA,
+			PORT55_DATA, PORT54_DATA, PORT53_DATA, PORT52_DATA,
+			PORT51_DATA, PORT50_DATA, PORT49_DATA, PORT48_DATA,
+			PORT47_DATA, PORT46_DATA, PORT45_DATA, PORT44_DATA,
+			PORT43_DATA, PORT42_DATA, PORT41_DATA, PORT40_DATA,
+			PORT39_DATA, PORT38_DATA, PORT37_DATA, PORT36_DATA,
+			PORT35_DATA, PORT34_DATA, PORT33_DATA, PORT32_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTL095_064DR", 0xe6054008, 32) {
+			PORT95_DATA, PORT94_DATA, PORT93_DATA, PORT92_DATA,
+			PORT91_DATA, PORT90_DATA, PORT89_DATA, PORT88_DATA,
+			PORT87_DATA, PORT86_DATA, PORT85_DATA, PORT84_DATA,
+			PORT83_DATA, PORT82_DATA, PORT81_DATA, PORT80_DATA,
+			PORT79_DATA, PORT78_DATA, PORT77_DATA, PORT76_DATA,
+			PORT75_DATA, PORT74_DATA, PORT73_DATA, PORT72_DATA,
+			PORT71_DATA, PORT70_DATA, PORT69_DATA, PORT68_DATA,
+			PORT67_DATA, PORT66_DATA, PORT65_DATA, PORT64_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTD127_096DR", 0xe605400C, 32) {
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, PORT118_DATA, PORT117_DATA, PORT116_DATA,
+			PORT115_DATA, PORT114_DATA, PORT113_DATA, PORT112_DATA,
+			PORT111_DATA, PORT110_DATA, PORT109_DATA, PORT108_DATA,
+			PORT107_DATA, PORT106_DATA, PORT105_DATA, PORT104_DATA,
+			PORT103_DATA, PORT102_DATA, PORT101_DATA, PORT100_DATA,
+			PORT99_DATA, PORT98_DATA, PORT97_DATA, PORT96_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTD159_128DR", 0xe6055000, 32) {
+			PORT159_DATA, PORT158_DATA, PORT157_DATA, PORT156_DATA,
+			PORT155_DATA, PORT154_DATA, PORT153_DATA, PORT152_DATA,
+			PORT151_DATA, PORT150_DATA, PORT149_DATA, PORT148_DATA,
+			PORT147_DATA, PORT146_DATA, PORT145_DATA, PORT144_DATA,
+			PORT143_DATA, PORT142_DATA, PORT141_DATA, PORT140_DATA,
+			PORT139_DATA, PORT138_DATA, PORT137_DATA, PORT136_DATA,
+			PORT135_DATA, PORT134_DATA, PORT133_DATA, PORT132_DATA,
+			PORT131_DATA, PORT130_DATA, PORT129_DATA, PORT128_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTR191_160DR", 0xe6055004, 32) {
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, PORT164_DATA,
+			PORT163_DATA, PORT162_DATA, PORT161_DATA, PORT160_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTR223_192DR", 0xe6056000, 32) {
+			PORT223_DATA, PORT222_DATA, PORT221_DATA, PORT220_DATA,
+			PORT219_DATA, PORT218_DATA, PORT217_DATA, PORT216_DATA,
+			PORT215_DATA, PORT214_DATA, PORT213_DATA, PORT212_DATA,
+			PORT211_DATA, PORT210_DATA, PORT209_DATA, PORT208_DATA,
+			PORT207_DATA, PORT206_DATA, PORT205_DATA, PORT204_DATA,
+			PORT203_DATA, PORT202_DATA, PORT201_DATA, PORT200_DATA,
+			PORT199_DATA, PORT198_DATA, PORT197_DATA, PORT196_DATA,
+			PORT195_DATA, PORT194_DATA, PORT193_DATA, PORT192_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTU255_224DR", 0xe6056004, 32) {
+			PORT255_DATA, PORT254_DATA, PORT253_DATA, PORT252_DATA,
+			PORT251_DATA, PORT250_DATA, PORT249_DATA, PORT248_DATA,
+			PORT247_DATA, PORT246_DATA, PORT245_DATA, PORT244_DATA,
+			PORT243_DATA, PORT242_DATA, PORT241_DATA, PORT240_DATA,
+			PORT239_DATA, PORT238_DATA, PORT237_DATA, PORT236_DATA,
+			PORT235_DATA, PORT234_DATA, PORT233_DATA, PORT232_DATA,
+			PORT231_DATA, PORT230_DATA, PORT229_DATA, PORT228_DATA,
+			PORT227_DATA, PORT226_DATA, PORT225_DATA, PORT224_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTU287_256DR", 0xe6056008, 32) {
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, PORT264_DATA,
+			PORT263_DATA, PORT262_DATA, PORT261_DATA, PORT260_DATA,
+			PORT259_DATA, PORT258_DATA, PORT257_DATA, PORT256_DATA }
+	},
+	{ },
+};
+
+static struct pinmux_info sh7377_pinmux_info = {
+	.name = "sh7377_pfc",
+	.reserved_id = PINMUX_RESERVED,
+	.data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END },
+	.input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
+	.input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END },
+	.input_pd = { PINMUX_INPUT_PULLDOWN_BEGIN, PINMUX_INPUT_PULLDOWN_END },
+	.output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
+	.mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END },
+	.function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
+
+	.first_gpio = GPIO_PORT0,
+	.last_gpio = GPIO_FN_RESETOUTS,
+
+	.gpios = pinmux_gpios,
+	.cfg_regs = pinmux_config_regs,
+	.data_regs = pinmux_data_regs,
+
+	.gpio_data = pinmux_data,
+	.gpio_data_size = ARRAY_SIZE(pinmux_data),
+};
+
+void sh7377_pinmux_init(void)
+{
+	register_pinmux(&sh7377_pinmux_info);
+}
diff --git a/arch/arm/mach-shmobile/setup-sh7367.c b/arch/arm/mach-shmobile/setup-sh7367.c
new file mode 100644
index 000000000000..eca90716140e
--- /dev/null
+++ b/arch/arm/mach-shmobile/setup-sh7367.c
@@ -0,0 +1,198 @@
+/*
+ * sh7367 processor support
+ *
+ * Copyright (C) 2010  Magnus Damm
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static struct plat_sci_port scif0_platform_data = {
+	.mapbase	= 0xe6c40000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs		= { 80, 80, 80, 80 },
+};
+
+static struct platform_device scif0_device = {
+	.name		= "sh-sci",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &scif0_platform_data,
+	},
+};
+
+static struct plat_sci_port scif1_platform_data = {
+	.mapbase	= 0xe6c50000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 81, 81, 81, 81 },
+};
+
+static struct platform_device scif1_device = {
+	.name		= "sh-sci",
+	.id		= 1,
+	.dev		= {
+		.platform_data	= &scif1_platform_data,
+	},
+};
+
+static struct plat_sci_port scif2_platform_data = {
+	.mapbase	= 0xe6c60000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 82, 82, 82, 82 },
+};
+
+static struct platform_device scif2_device = {
+	.name		= "sh-sci",
+	.id		= 2,
+	.dev		= {
+		.platform_data	= &scif2_platform_data,
+	},
+};
+
+static struct plat_sci_port scif3_platform_data = {
+	.mapbase	= 0xe6c70000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 83, 83, 83, 83 },
+};
+
+static struct platform_device scif3_device = {
+	.name		= "sh-sci",
+	.id		= 3,
+	.dev		= {
+		.platform_data	= &scif3_platform_data,
+	},
+};
+
+static struct plat_sci_port scif4_platform_data = {
+	.mapbase	= 0xe6c80000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 89, 89, 89, 89 },
+};
+
+static struct platform_device scif4_device = {
+	.name		= "sh-sci",
+	.id		= 4,
+	.dev		= {
+		.platform_data	= &scif4_platform_data,
+	},
+};
+
+static struct plat_sci_port scif5_platform_data = {
+	.mapbase	= 0xe6cb0000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 90, 90, 90, 90 },
+};
+
+static struct platform_device scif5_device = {
+	.name		= "sh-sci",
+	.id		= 5,
+	.dev		= {
+		.platform_data	= &scif5_platform_data,
+	},
+};
+
+static struct plat_sci_port scif6_platform_data = {
+	.mapbase	= 0xe6c30000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 91, 91, 91, 91 },
+};
+
+static struct platform_device scif6_device = {
+	.name		= "sh-sci",
+	.id		= 6,
+	.dev		= {
+		.platform_data	= &scif6_platform_data,
+	},
+};
+
+static struct sh_timer_config cmt10_platform_data = {
+	.name = "CMT10",
+	.channel_offset = 0x10,
+	.timer_bit = 0,
+	.clk = "r_clk",
+	.clockevent_rating = 125,
+	.clocksource_rating = 125,
+};
+
+static struct resource cmt10_resources[] = {
+	[0] = {
+		.name	= "CMT10",
+		.start	= 0xe6138010,
+		.end	= 0xe613801b,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 72,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cmt10_device = {
+	.name		= "sh_cmt",
+	.id		= 10,
+	.dev = {
+		.platform_data	= &cmt10_platform_data,
+	},
+	.resource	= cmt10_resources,
+	.num_resources	= ARRAY_SIZE(cmt10_resources),
+};
+
+static struct platform_device *sh7367_early_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&scif2_device,
+	&scif3_device,
+	&scif4_device,
+	&scif5_device,
+	&scif6_device,
+	&cmt10_device,
+};
+
+void __init sh7367_add_standard_devices(void)
+{
+	platform_add_devices(sh7367_early_devices,
+			     ARRAY_SIZE(sh7367_early_devices));
+}
+
+#define SYMSTPCR2 0xe6158048
+#define SYMSTPCR2_CMT1 (1 << 29)
+
+void __init sh7367_add_early_devices(void)
+{
+	/* enable clock to CMT1 */
+	__raw_writel(__raw_readl(SYMSTPCR2) & ~SYMSTPCR2_CMT1, SYMSTPCR2);
+
+	early_platform_add_devices(sh7367_early_devices,
+				   ARRAY_SIZE(sh7367_early_devices));
+}
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
new file mode 100644
index 000000000000..1d1153290f59
--- /dev/null
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -0,0 +1,199 @@
+/*
+ * sh7372 processor support
+ *
+ * Copyright (C) 2010  Magnus Damm
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_intc.h>
+#include <linux/sh_timer.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static struct plat_sci_port scif0_platform_data = {
+	.mapbase	= 0xe6c40000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs		= { 80, 80, 80, 80 },
+};
+
+static struct platform_device scif0_device = {
+	.name		= "sh-sci",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &scif0_platform_data,
+	},
+};
+
+static struct plat_sci_port scif1_platform_data = {
+	.mapbase	= 0xe6c50000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 81, 81, 81, 81 },
+};
+
+static struct platform_device scif1_device = {
+	.name		= "sh-sci",
+	.id		= 1,
+	.dev		= {
+		.platform_data	= &scif1_platform_data,
+	},
+};
+
+static struct plat_sci_port scif2_platform_data = {
+	.mapbase	= 0xe6c60000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 82, 82, 82, 82 },
+};
+
+static struct platform_device scif2_device = {
+	.name		= "sh-sci",
+	.id		= 2,
+	.dev		= {
+		.platform_data	= &scif2_platform_data,
+	},
+};
+
+static struct plat_sci_port scif3_platform_data = {
+	.mapbase	= 0xe6c70000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 83, 83, 83, 83 },
+};
+
+static struct platform_device scif3_device = {
+	.name		= "sh-sci",
+	.id		= 3,
+	.dev		= {
+		.platform_data	= &scif3_platform_data,
+	},
+};
+
+static struct plat_sci_port scif4_platform_data = {
+	.mapbase	= 0xe6c80000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 89, 89, 89, 89 },
+};
+
+static struct platform_device scif4_device = {
+	.name		= "sh-sci",
+	.id		= 4,
+	.dev		= {
+		.platform_data	= &scif4_platform_data,
+	},
+};
+
+static struct plat_sci_port scif5_platform_data = {
+	.mapbase	= 0xe6cb0000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 90, 90, 90, 90 },
+};
+
+static struct platform_device scif5_device = {
+	.name		= "sh-sci",
+	.id		= 5,
+	.dev		= {
+		.platform_data	= &scif5_platform_data,
+	},
+};
+
+static struct plat_sci_port scif6_platform_data = {
+	.mapbase	= 0xe6c30000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 91, 91, 91, 91 },
+};
+
+static struct platform_device scif6_device = {
+	.name		= "sh-sci",
+	.id		= 6,
+	.dev		= {
+		.platform_data	= &scif6_platform_data,
+	},
+};
+
+static struct sh_timer_config cmt10_platform_data = {
+	.name = "CMT10",
+	.channel_offset = 0x10,
+	.timer_bit = 0,
+	.clk = "r_clk",
+	.clockevent_rating = 125,
+	.clocksource_rating = 125,
+};
+
+static struct resource cmt10_resources[] = {
+	[0] = {
+		.name	= "CMT10",
+		.start	= 0xe6138010,
+		.end	= 0xe613801b,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 72,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cmt10_device = {
+	.name		= "sh_cmt",
+	.id		= 10,
+	.dev = {
+		.platform_data	= &cmt10_platform_data,
+	},
+	.resource	= cmt10_resources,
+	.num_resources	= ARRAY_SIZE(cmt10_resources),
+};
+
+static struct platform_device *sh7372_early_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&scif2_device,
+	&scif3_device,
+	&scif4_device,
+	&scif5_device,
+	&scif6_device,
+	&cmt10_device,
+};
+
+void __init sh7372_add_standard_devices(void)
+{
+	platform_add_devices(sh7372_early_devices,
+			    ARRAY_SIZE(sh7372_early_devices));
+}
+
+#define SMSTPCR3 0xe615013c
+#define SMSTPCR3_CMT1 (1 << 29)
+
+void __init sh7372_add_early_devices(void)
+{
+	/* enable clock to CMT1 */
+	__raw_writel(__raw_readl(SMSTPCR3) & ~SMSTPCR3_CMT1, SMSTPCR3);
+
+	early_platform_add_devices(sh7372_early_devices,
+				   ARRAY_SIZE(sh7372_early_devices));
+}
diff --git a/arch/arm/mach-shmobile/setup-sh7377.c b/arch/arm/mach-shmobile/setup-sh7377.c
new file mode 100644
index 000000000000..60e37774c35c
--- /dev/null
+++ b/arch/arm/mach-shmobile/setup-sh7377.c
@@ -0,0 +1,215 @@
+/*
+ * sh7377 processor support
+ *
+ * Copyright (C) 2010  Magnus Damm
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_intc.h>
+#include <linux/sh_timer.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static struct plat_sci_port scif0_platform_data = {
+	.mapbase	= 0xe6c40000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs		= { 80, 80, 80, 80 },
+};
+
+static struct platform_device scif0_device = {
+	.name		= "sh-sci",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &scif0_platform_data,
+	},
+};
+
+static struct plat_sci_port scif1_platform_data = {
+	.mapbase	= 0xe6c50000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 81, 81, 81, 81 },
+};
+
+static struct platform_device scif1_device = {
+	.name		= "sh-sci",
+	.id		= 1,
+	.dev		= {
+		.platform_data	= &scif1_platform_data,
+	},
+};
+
+static struct plat_sci_port scif2_platform_data = {
+	.mapbase	= 0xe6c60000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 82, 82, 82, 82 },
+};
+
+static struct platform_device scif2_device = {
+	.name		= "sh-sci",
+	.id		= 2,
+	.dev		= {
+		.platform_data	= &scif2_platform_data,
+	},
+};
+
+static struct plat_sci_port scif3_platform_data = {
+	.mapbase	= 0xe6c70000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 83, 83, 83, 83 },
+};
+
+static struct platform_device scif3_device = {
+	.name		= "sh-sci",
+	.id		= 3,
+	.dev		= {
+		.platform_data	= &scif3_platform_data,
+	},
+};
+
+static struct plat_sci_port scif4_platform_data = {
+	.mapbase	= 0xe6c80000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 89, 89, 89, 89 },
+};
+
+static struct platform_device scif4_device = {
+	.name		= "sh-sci",
+	.id		= 4,
+	.dev		= {
+		.platform_data	= &scif4_platform_data,
+	},
+};
+
+static struct plat_sci_port scif5_platform_data = {
+	.mapbase	= 0xe6cb0000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 90, 90, 90, 90 },
+};
+
+static struct platform_device scif5_device = {
+	.name		= "sh-sci",
+	.id		= 5,
+	.dev		= {
+		.platform_data	= &scif5_platform_data,
+	},
+};
+
+static struct plat_sci_port scif6_platform_data = {
+	.mapbase	= 0xe6cc0000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 196, 196, 196, 196 },
+};
+
+static struct platform_device scif6_device = {
+	.name		= "sh-sci",
+	.id		= 6,
+	.dev		= {
+		.platform_data	= &scif6_platform_data,
+	},
+};
+
+static struct plat_sci_port scif7_platform_data = {
+	.mapbase	= 0xe6c30000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 91, 91, 91, 91 },
+};
+
+static struct platform_device scif7_device = {
+	.name		= "sh-sci",
+	.id		= 7,
+	.dev		= {
+		.platform_data	= &scif7_platform_data,
+	},
+};
+
+static struct sh_timer_config cmt10_platform_data = {
+	.name = "CMT10",
+	.channel_offset = 0x10,
+	.timer_bit = 0,
+	.clk = "r_clk",
+	.clockevent_rating = 125,
+	.clocksource_rating = 125,
+};
+
+static struct resource cmt10_resources[] = {
+	[0] = {
+		.name	= "CMT10",
+		.start	= 0xe6138010,
+		.end	= 0xe613801b,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 72,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cmt10_device = {
+	.name		= "sh_cmt",
+	.id		= 10,
+	.dev = {
+		.platform_data	= &cmt10_platform_data,
+	},
+	.resource	= cmt10_resources,
+	.num_resources	= ARRAY_SIZE(cmt10_resources),
+};
+
+static struct platform_device *sh7377_early_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&scif2_device,
+	&scif3_device,
+	&scif4_device,
+	&scif5_device,
+	&scif6_device,
+	&scif7_device,
+	&cmt10_device,
+};
+
+void __init sh7377_add_standard_devices(void)
+{
+	platform_add_devices(sh7377_early_devices,
+			    ARRAY_SIZE(sh7377_early_devices));
+}
+
+#define SMSTPCR3 0xe615013c
+#define SMSTPCR3_CMT1 (1 << 29)
+
+void __init sh7377_add_early_devices(void)
+{
+	/* enable clock to CMT1 */
+	__raw_writel(__raw_readl(SMSTPCR3) & ~SMSTPCR3_CMT1, SMSTPCR3);
+
+	early_platform_add_devices(sh7377_early_devices,
+				   ARRAY_SIZE(sh7377_early_devices));
+}
diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c
new file mode 100644
index 000000000000..895794b543cd
--- /dev/null
+++ b/arch/arm/mach-shmobile/timer.c
@@ -0,0 +1,46 @@
+/*
+ * SH-Mobile Timer
+ *
+ * Copyright (C) 2010  Magnus Damm
+ * Copyright (C) 2002 - 2009  Paul Mundt
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+#include <linux/platform_device.h>
+#include <asm/mach/time.h>
+
+static void __init shmobile_late_time_init(void)
+{
+	/*
+	 * Make sure all compiled-in early timers register themselves.
+	 *
+	 * Run probe() for two "earlytimer" devices, these will be the
+	 * clockevents and clocksource devices respectively. In the event
+	 * that only a clockevents device is available, we -ENODEV on the
+	 * clocksource and the jiffies clocksource is used transparently
+	 * instead. No error handling is necessary here.
+	 */
+	early_platform_driver_register_all("earlytimer");
+	early_platform_driver_probe("earlytimer", 2, 0);
+}
+
+static void __init shmobile_timer_init(void)
+{
+	late_time_init = shmobile_late_time_init;
+}
+
+struct sys_timer shmobile_timer = {
+	.init		= shmobile_timer_init,
+};
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 01b50313914c..5f34eb674d68 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -358,7 +358,7 @@ static struct resource ave_resources[] = {
 	/*
 	 * The AVE3e requires two regions of 256MB that it considers
 	 * "invisible". The hardware will not be able to access these
-	 * adresses, so they should never point to system RAM.
+	 * addresses, so they should never point to system RAM.
 	 */
 	{
 		.name  = "AVE3e Reserved 0",
@@ -1596,7 +1596,7 @@ static void __init u300_init_check_chip(void)
 /*
  * Some devices and their resources require reserved physical memory from
  * the end of the available RAM. This function traverses the list of devices
- * and assigns actual adresses to these.
+ * and assigns actual addresses to these.
  */
 static void __init u300_assign_physmem(void)
 {
diff --git a/arch/arm/mach-u300/include/mach/debug-macro.S b/arch/arm/mach-u300/include/mach/debug-macro.S
index ca4a028c2661..92c12420256f 100644
--- a/arch/arm/mach-u300/include/mach/debug-macro.S
+++ b/arch/arm/mach-u300/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
 #include <mach/hardware.h>
 
 	.macro	addruart, rx, tmp
-	/* If we move the adress using MMU, use this. */
+	/* If we move the address using MMU, use this. */
 	mrc	p15, 0, \rx, c1, c0
 	tst	\rx, #1			@ MMU enabled?
 	ldreq	\rx,	  = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address
diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h
index 6da650202dc7..04ea836969b3 100644
--- a/arch/arm/mach-ux500/include/mach/hardware.h
+++ b/arch/arm/mach-ux500/include/mach/hardware.h
@@ -68,12 +68,12 @@
 #define U8500_PKAM_BASE		(U8500_PER6_BASE + 0x2000)
 #define U8500_CRYPTO0_BASE	(U8500_PER6_BASE + 0xa000)
 #define U8500_CRYPTO1_BASE	(U8500_PER6_BASE + 0xb000)
-#define U8500_CLKRST6_BASE	(U8500_PER7_BASE + 0xf000)
+#define U8500_CLKRST6_BASE	(U8500_PER6_BASE + 0xf000)
 
 /* per5 base addressess */
 #define U8500_USBOTG_BASE	(U8500_PER5_BASE + 0x00000)
 #define U8500_GPIO5_BASE	(U8500_PER5_BASE + 0x1e000)
-#define U8500_CLKRST5_BASE	(U8500_PER7_BASE + 0x1f000)
+#define U8500_CLKRST5_BASE	(U8500_PER5_BASE + 0x1f000)
 
 /* per4 base addressess */
 #define U8500_BACKUPRAM0_BASE	(U8500_PER4_BASE + 0x0000)
@@ -95,7 +95,7 @@
 #define U8500_UART2_BASE	(U8500_PER3_BASE + 0x7000)
 #define U8500_SDI5_BASE		(U8500_PER3_BASE + 0x8000)
 #define U8500_GPIO3_BASE	(U8500_PER3_BASE + 0xe000)
-#define U8500_CLKRST3_BASE	(U8500_PER7_BASE + 0xf000)
+#define U8500_CLKRST3_BASE	(U8500_PER3_BASE + 0xf000)
 
 /* per2 base addressess */
 #define U8500_I2C3_BASE		(U8500_PER2_BASE + 0x0000)
@@ -123,7 +123,7 @@
 #define U8500_SPI3_BASE		(U8500_PER1_BASE + 0x9000)
 #define U8500_SLIM0_BASE	(U8500_PER1_BASE + 0xa000)
 #define U8500_GPIO1_BASE	(U8500_PER1_BASE + 0xe000)
-#define U8500_CLKRST1_BASE	(U8500_PER2_BASE + 0xf000)
+#define U8500_CLKRST1_BASE	(U8500_PER1_BASE + 0xf000)
 
 /* ST-Ericsson modified pl022 id */
 #define SSP_PER_ID		0x01080022
diff --git a/arch/arm/mach-w90x900/cpu.h b/arch/arm/mach-w90x900/cpu.h
index 4d58ba164e25..f8730b60bd76 100644
--- a/arch/arm/mach-w90x900/cpu.h
+++ b/arch/arm/mach-w90x900/cpu.h
@@ -57,3 +57,4 @@ extern struct platform_device nuc900_device_fmi;
 extern struct platform_device nuc900_device_kpi;
 extern struct platform_device nuc900_device_rtc;
 extern struct platform_device nuc900_device_ts;
+extern struct platform_device nuc900_device_lcd;
diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c
index ec711f4b4019..48876122df91 100644
--- a/arch/arm/mach-w90x900/dev.c
+++ b/arch/arm/mach-w90x900/dev.c
@@ -34,6 +34,7 @@
 #include <mach/regs-serial.h>
 #include <mach/nuc900_spi.h>
 #include <mach/map.h>
+#include <mach/fb.h>
 
 #include "cpu.h"
 
@@ -380,6 +381,47 @@ struct platform_device nuc900_device_kpi = {
 	.resource	= nuc900_kpi_resource,
 };
 
+#ifdef CONFIG_FB_NUC900
+
+static struct resource nuc900_lcd_resource[] = {
+	[0] = {
+		.start = W90X900_PA_LCD,
+		.end   = W90X900_PA_LCD + W90X900_SZ_LCD - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_LCD,
+		.end   = IRQ_LCD,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static u64 nuc900_device_lcd_dmamask = -1;
+struct platform_device nuc900_device_lcd = {
+	.name             = "nuc900-lcd",
+	.id               = -1,
+	.num_resources    = ARRAY_SIZE(nuc900_lcd_resource),
+	.resource         = nuc900_lcd_resource,
+	.dev              = {
+		.dma_mask               = &nuc900_device_lcd_dmamask,
+		.coherent_dma_mask      = -1,
+	}
+};
+
+void  nuc900_fb_set_platdata(struct nuc900fb_mach_info *pd)
+{
+	struct nuc900fb_mach_info *npd;
+
+	npd = kmalloc(sizeof(*npd), GFP_KERNEL);
+	if (npd) {
+		memcpy(npd, pd, sizeof(*npd));
+		nuc900_device_lcd.dev.platform_data = npd;
+	} else {
+		printk(KERN_ERR "no memory for LCD platform data\n");
+	}
+}
+#endif
+
 /*Here should be your evb resourse,such as LCD*/
 
 static struct platform_device *nuc900_public_dev[] __initdata = {
diff --git a/arch/arm/mach-w90x900/include/mach/fb.h b/arch/arm/mach-w90x900/include/mach/fb.h
new file mode 100644
index 000000000000..cec5ece765ed
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/fb.h
@@ -0,0 +1,83 @@
+/* linux/include/asm/arch-nuc900/fb.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Changelog:
+ *
+ *   2008/08/26     vincen.zswan modify this file for LCD.
+ */
+
+#ifndef __ASM_ARM_FB_H
+#define __ASM_ARM_FB_H
+
+
+
+/* LCD Controller Hardware Desc */
+struct nuc900fb_hw {
+	unsigned int lcd_dccs;
+	unsigned int lcd_device_ctrl;
+	unsigned int lcd_mpulcd_cmd;
+	unsigned int lcd_int_cs;
+	unsigned int lcd_crtc_size;
+	unsigned int lcd_crtc_dend;
+	unsigned int lcd_crtc_hr;
+	unsigned int lcd_crtc_hsync;
+	unsigned int lcd_crtc_vr;
+	unsigned int lcd_va_baddr0;
+	unsigned int lcd_va_baddr1;
+	unsigned int lcd_va_fbctrl;
+	unsigned int lcd_va_scale;
+	unsigned int lcd_va_test;
+	unsigned int lcd_va_win;
+	unsigned int lcd_va_stuff;
+};
+
+/* LCD Display Description */
+struct nuc900fb_display {
+	/* LCD Image type */
+	unsigned type;
+
+	/* LCD Screen Size */
+	unsigned short width;
+	unsigned short height;
+
+	/* LCD Screen Info */
+	unsigned short xres;
+	unsigned short yres;
+	unsigned short bpp;
+
+	unsigned long pixclock;
+	unsigned short left_margin;
+	unsigned short right_margin;
+	unsigned short hsync_len;
+	unsigned short upper_margin;
+	unsigned short lower_margin;
+	unsigned short vsync_len;
+
+	/* hardware special register value */
+	unsigned int dccs;
+	unsigned int devctl;
+	unsigned int fbctrl;
+	unsigned int scale;
+};
+
+struct nuc900fb_mach_info {
+	struct nuc900fb_display *displays;
+	unsigned num_displays;
+	unsigned default_display;
+	/* GPIO Setting  Info */
+	unsigned gpio_dir;
+	unsigned gpio_dir_mask;
+	unsigned gpio_data;
+	unsigned gpio_data_mask;
+};
+
+extern void __init nuc900_fb_set_platdata(struct nuc900fb_mach_info *);
+
+#endif /* __ASM_ARM_FB_H */
diff --git a/arch/arm/mach-w90x900/include/mach/regs-ldm.h b/arch/arm/mach-w90x900/include/mach/regs-ldm.h
new file mode 100644
index 000000000000..e9d480a5b232
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/regs-ldm.h
@@ -0,0 +1,253 @@
+/*
+ * arch/arm/mach-w90x900/include/mach/regs-serial.h
+ *
+ * Copyright (c) 2009 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ *  Description:
+ *     Nuvoton Display, LCM Register list
+ *  Author:  Wang Qiang (rurality.linux@gmail.com) 2009/12/11
+ *
+ */
+
+
+#ifndef __ASM_ARM_W90X900_REGS_LDM_H
+#define __ASM_ARM_W90X900_REGS_LDM_H
+
+#include <mach/map.h>
+
+/* Display Controller Control/Status Register */
+#define REG_LCM_DCCS			(0x00)
+
+#define LCM_DCCS_ENG_RST		(1 << 0)
+#define LCM_DCCS_VA_EN			(1 << 1)
+#define LCM_DCCS_OSD_EN			(1 << 2)
+#define LCM_DCCS_DISP_OUT_EN		(1 << 3)
+#define LCM_DCCS_DISP_INT_EN		(1 << 4)
+#define LCM_DCCS_CMD_ON			(1 << 5)
+#define LCM_DCCS_FIELD_INTR		(1 << 6)
+#define LCM_DCCS_SINGLE			(1 << 7)
+
+enum LCM_DCCS_VA_SRC {
+	LCM_DCCS_VA_SRC_YUV422		= (0 << 8),
+	LCM_DCCS_VA_SRC_YCBCR422	= (1 << 8),
+	LCM_DCCS_VA_SRC_RGB888		= (2 << 8),
+	LCM_DCCS_VA_SRC_RGB666		= (3 << 8),
+	LCM_DCCS_VA_SRC_RGB565		= (4 << 8),
+	LCM_DCCS_VA_SRC_RGB444LOW	= (5 << 8),
+	LCM_DCCS_VA_SRC_RGB444HIGH 	= (7 << 8)
+};
+
+
+/* Display Device Control Register */
+#define REG_LCM_DEV_CTRL		(0x04)
+
+enum LCM_DEV_CTRL_SWAP_YCbCr {
+	LCM_DEV_CTRL_SWAP_UYVY		= (0 << 1),
+	LCM_DEV_CTRL_SWAP_YUYV		= (1 << 1),
+	LCM_DEV_CTRL_SWAP_VYUY		= (2 << 1),
+	LCM_DEV_CTRL_SWAP_YVYU		= (3 << 1)
+};
+
+enum LCM_DEV_CTRL_RGB_SHIFT {
+	LCM_DEV_CTRL_RGB_SHIFT_NOT 	= (0 << 3),
+	LCM_DEV_CTRL_RGB_SHIFT_ONECYCLE = (1 << 3),
+	LCM_DEV_CTRL_RGB_SHIFT_TWOCYCLE = (2 << 3),
+	LCM_DEV_CTRL_RGB_SHIFT_NOT_DEF	= (3 << 3)
+};
+
+enum LCM_DEV_CTRL_DEVICE {
+	LCM_DEV_CTRL_DEVICE_YUV422	= (0 << 5),
+	LCM_DEV_CTRL_DEVICE_YUV444	= (1 << 5),
+	LCM_DEV_CTRL_DEVICE_UNIPAC	= (4 << 5),
+	LCM_DEV_CTRL_DEVICE_SEIKO_EPSON	= (5 << 5),
+	LCM_DEV_CTRL_DEVICE_HIGH_COLOR	= (6 << 5),
+	LCM_DEV_CTRL_DEVICE_MPU		= (7 << 5)
+};
+
+#define LCM_DEV_CTRL_LCD_DDA		(8)
+#define LCM_DEV_CTRL_YUV2CCIR		(16)
+
+enum LCM_DEV_CTRL_LCD_SEL {
+	LCM_DEV_CTRL_LCD_SEL_RGB_GBR	= (0 << 17),
+	LCM_DEV_CTRL_LCD_SEL_BGR_RBG	= (1 << 17),
+	LCM_DEV_CTRL_LCD_SEL_GBR_RGB	= (2 << 17),
+	LCM_DEV_CTRL_LCD_SEL_RBG_BGR	= (3 << 17)
+};
+
+enum LCM_DEV_CTRL_FAL_D {
+	LCM_DEV_CTRL_FAL_D_FALLING	= (0 << 19),
+	LCM_DEV_CTRL_FAL_D_RISING	= (1 << 19),
+};
+
+enum LCM_DEV_CTRL_H_POL {
+	LCM_DEV_CTRL_H_POL_LOW		= (0 << 20),
+	LCM_DEV_CTRL_H_POL_HIGH		= (1 << 20),
+};
+
+enum LCM_DEV_CTRL_V_POL {
+	LCM_DEV_CTRL_V_POL_LOW		= (0 << 21),
+	LCM_DEV_CTRL_V_POL_HIGH		= (1 << 21),
+};
+
+enum LCM_DEV_CTRL_VR_LACE {
+	LCM_DEV_CTRL_VR_LACE_NINTERLACE	= (0 << 22),
+	LCM_DEV_CTRL_VR_LACE_INTERLACE	= (1 << 22),
+};
+
+enum LCM_DEV_CTRL_LACE {
+	LCM_DEV_CTRL_LACE_NINTERLACE	= (0 << 23),
+	LCM_DEV_CTRL_LACE_INTERLACE	= (1 << 23),
+};
+
+enum LCM_DEV_CTRL_RGB_SCALE {
+	LCM_DEV_CTRL_RGB_SCALE_4096 	= (0 << 24),
+	LCM_DEV_CTRL_RGB_SCALE_65536 	= (1 << 24),
+	LCM_DEV_CTRL_RGB_SCALE_262144 	= (2 << 24),
+	LCM_DEV_CTRL_RGB_SCALE_16777216 = (3 << 24),
+};
+
+enum LCM_DEV_CTRL_DBWORD {
+	LCM_DEV_CTRL_DBWORD_HALFWORD	= (0 << 26),
+	LCM_DEV_CTRL_DBWORD_FULLWORD	= (1 << 26),
+};
+
+enum LCM_DEV_CTRL_MPU68 {
+	LCM_DEV_CTRL_MPU68_80_SERIES	= (0 << 27),
+	LCM_DEV_CTRL_MPU68_68_SERIES	= (1 << 27),
+};
+
+enum LCM_DEV_CTRL_DE_POL {
+	LCM_DEV_CTRL_DE_POL_HIGH	= (0 << 28),
+	LCM_DEV_CTRL_DE_POL_LOW		= (1 << 28),
+};
+
+#define LCM_DEV_CTRL_CMD16		(29)
+#define LCM_DEV_CTRL_CM16t18		(30)
+#define LCM_DEV_CTRL_CMD_LOW		(31)
+
+/* MPU-Interface LCD Write Command */
+#define REG_LCM_MPU_CMD			(0x08)
+
+/* Interrupt Control/Status Register */
+#define REG_LCM_INT_CS			(0x0c)
+#define LCM_INT_CS_DISP_F_EN		(1 << 0)
+#define LCM_INT_CS_UNDERRUN_EN   	(1 << 1)
+#define LCM_INT_CS_BUS_ERROR_INT 	(1 << 28)
+#define LCM_INT_CS_UNDERRUN_INT  	(1 << 29)
+#define LCM_INT_CS_DISP_F_STATUS 	(1 << 30)
+#define LCM_INT_CS_DISP_F_INT		(1 << 31)
+
+/* CRTC Display Size Control Register */
+#define REG_LCM_CRTC_SIZE		(0x10)
+#define LCM_CRTC_SIZE_VTTVAL(x)		((x) << 16)
+#define LCM_CRTC_SIZE_HTTVAL(x)		((x) << 0)
+
+/* CRTC Display Enable End */
+#define REG_LCM_CRTC_DEND		(0x14)
+#define LCM_CRTC_DEND_VDENDVAL(x)	((x) << 16)
+#define LCM_CRTC_DEND_HDENDVAL(x)	((x) << 0)
+
+/* CRTC Internal Horizontal Retrace Control Register */
+#define REG_LCM_CRTC_HR			(0x18)
+#define LCM_CRTC_HR_EVAL(x)		((x) << 16)
+#define LCM_CRTC_HR_SVAL(x)		((x) << 0)
+
+/* CRTC Horizontal Sync Control Register */
+#define REG_LCM_CRTC_HSYNC		(0x1C)
+#define LCM_CRTC_HSYNC_SHIFTVAL(x)	((x) << 30)
+#define LCM_CRTC_HSYNC_EVAL(x)		((x) << 16)
+#define LCM_CRTC_HSYNC_SVAL(x)		((x) << 0)
+
+/* CRTC Internal Vertical Retrace Control Register */
+#define REG_LCM_CRTC_VR			(0x20)
+#define LCM_CRTC_VR_EVAL(x)		((x) << 16)
+#define LCM_CRTC_VR_SVAL(x)		((x) << 0)
+
+/* Video Stream Frame Buffer-0 Starting Address */
+#define REG_LCM_VA_BADDR0		(0x24)
+
+/* Video Stream Frame Buffer-1 Starting Address */
+#define REG_LCM_VA_BADDR1		(0x28)
+
+/* Video Stream Frame Buffer Control Register */
+#define REG_LCM_VA_FBCTRL		(0x2C)
+#define LCM_VA_FBCTRL_IO_REGION_HALF	(1 << 28)
+#define LCM_VA_FBCTRL_FIELD_DUAL  	(1 << 29)
+#define LCM_VA_FBCTRL_START_BUF 	(1 << 30)
+#define LCM_VA_FBCTRL_DB_EN		(1 << 31)
+
+/* Video Stream Scaling Control Register */
+#define REG_LCM_VA_SCALE		(0x30)
+#define LCM_VA_SCALE_XCOPY_INTERPOLATION (0 << 15)
+#define LCM_VA_SCALE_XCOPY_DUPLICATION	 (1 << 15)
+
+/* Image Stream Active Window Coordinates */
+#define REG_LCM_VA_WIN			(0x38)
+
+/* Image Stream Stuff Pixel */
+#define REG_LCM_VA_STUFF		(0x3C)
+
+/* OSD Window Starting Coordinates */
+#define REG_LCM_OSD_WINS		(0x40)
+
+/* OSD Window Ending Coordinates */
+#define REG_LCM_OSD_WINE		(0x44)
+
+/* OSD Stream Frame Buffer Starting Address */
+#define REG_LCM_OSD_BADDR		(0x48)
+
+/* OSD Stream Frame Buffer Control Register */
+#define REG_LCM_OSD_FBCTRL		(0x4c)
+
+/* OSD Overlay Control Register */
+#define REG_LCM_OSD_OVERLAY		(0x50)
+
+/* OSD Overlay Color-Key Pattern Register */
+#define REG_LCM_OSD_CKEY		(0x54)
+
+/* OSD Overlay Color-Key Mask Register */
+#define REG_LCM_OSD_CMASK		(0x58)
+
+/* OSD Window Skip1 Register */
+#define REG_LCM_OSD_SKIP1		(0x5C)
+
+/* OSD Window Skip2 Register */
+#define REG_LCM_OSD_SKIP2		(0x60)
+
+/* OSD horizontal up scaling control register */
+#define REG_LCM_OSD_SCALE		(0x64)
+
+/* MPU Vsync control register */
+#define REG_LCM_MPU_VSYNC		(0x68)
+
+/* Hardware cursor control Register */
+#define REG_LCM_HC_CTRL			(0x6C)
+
+/* Hardware cursot tip point potison on va picture */
+#define REG_LCM_HC_POS			(0x70)
+
+/* Hardware Cursor Window Buffer Control Register */
+#define REG_LCM_HC_WBCTRL		(0x74)
+
+/* Hardware cursor memory base address register */
+#define REG_LCM_HC_BADDR		(0x78)
+
+/* Hardware cursor color ram register mapped to bpp = 0 */
+#define REG_LCM_HC_COLOR0		(0x7C)
+
+/* Hardware cursor color ram register mapped to bpp = 1 */
+#define REG_LCM_HC_COLOR1		(0x80)
+
+/* Hardware cursor color ram register mapped to bpp = 2 */
+#define REG_LCM_HC_COLOR2		(0x84)
+
+/* Hardware cursor color ram register mapped to bpp = 3 */
+#define REG_LCM_HC_COLOR3		(0x88)
+
+#endif /* __ASM_ARM_W90X900_REGS_LDM_H */
diff --git a/arch/arm/mach-w90x900/mach-nuc950evb.c b/arch/arm/mach-w90x900/mach-nuc950evb.c
index cef903bcccd1..b3edc3cccf52 100644
--- a/arch/arm/mach-w90x900/mach-nuc950evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc950evb.c
@@ -10,6 +10,8 @@
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation;version 2 of the License.
+ *   history:
+ *     Wang Qiang (rurality.linux@gmail.com) add LCD support
  *
  */
 
@@ -18,9 +20,51 @@
 #include <asm/mach/map.h>
 #include <asm/mach-types.h>
 #include <mach/map.h>
+#include <mach/regs-ldm.h>
+#include <mach/fb.h>
 
 #include "nuc950.h"
 
+#ifdef CONFIG_FB_NUC900
+/* LCD Controller */
+static struct nuc900fb_display __initdata nuc950_lcd_info[] = {
+	/* Giantplus Technology GPM1040A0 320x240 Color TFT LCD */
+	[0] = {
+		.type		= LCM_DCCS_VA_SRC_RGB565,
+		.width 		= 320,
+		.height		= 240,
+		.xres		= 320,
+		.yres		= 240,
+		.bpp		= 16,
+		.pixclock	= 200000,
+		.left_margin	= 34,
+		.right_margin   = 54,
+		.hsync_len	= 10,
+		.upper_margin	= 18,
+		.lower_margin	= 4,
+		.vsync_len	= 1,
+		.dccs		= 0x8e00041a,
+		.devctl		= 0x060800c0,
+		.fbctrl		= 0x00a000a0,
+		.scale		= 0x04000400,
+	},
+};
+
+static struct nuc900fb_mach_info nuc950_fb_info __initdata = {
+#if defined(CONFIG_GPM1040A0_320X240)
+	.displays		= &nuc950_lcd_info[0],
+#else
+	.displays		= nuc950_lcd_info,
+#endif
+	.num_displays 		= ARRAY_SIZE(nuc950_lcd_info),
+	.default_display	= 0,
+	.gpio_dir		= 0x00000004,
+	.gpio_dir_mask		= 0xFFFFFFFD,
+	.gpio_data		= 0x00000004,
+	.gpio_data_mask		= 0xFFFFFFFD,
+};
+#endif
+
 static void __init nuc950evb_map_io(void)
 {
 	nuc950_map_io();
@@ -30,6 +74,9 @@ static void __init nuc950evb_map_io(void)
 static void __init nuc950evb_init(void)
 {
 	nuc950_board_init();
+#ifdef CONFIG_FB_NUC900
+	nuc900_fb_set_platdata(&nuc950_fb_info);
+#endif
 }
 
 MACHINE_START(W90P950EVB, "W90P950EVB")
diff --git a/arch/arm/mach-w90x900/nuc950.c b/arch/arm/mach-w90x900/nuc950.c
index 149508116d18..4d1f1ab044c4 100644
--- a/arch/arm/mach-w90x900/nuc950.c
+++ b/arch/arm/mach-w90x900/nuc950.c
@@ -18,6 +18,7 @@
 #include <linux/platform_device.h>
 #include <asm/mach/map.h>
 #include <mach/hardware.h>
+
 #include "cpu.h"
 
 /* define specific CPU platform device */
@@ -25,6 +26,9 @@
 static struct platform_device *nuc950_dev[] __initdata = {
 	&nuc900_device_kpi,
 	&nuc900_device_fmi,
+#ifdef CONFIG_FB_NUC900
+	&nuc900_device_lcd,
+#endif
 };
 
 /* define specific CPU platform io map */
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 8b0a1ee039fa..7f7ad6f289bd 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -9,38 +9,43 @@ choice
 config ARCH_MX1
 	bool "MX1-based"
 	select CPU_ARM920T
-	select COMMON_CLKDEV
+	select IMX_HAVE_IOMUX_V1
 	help
 	  This enables support for systems based on the Freescale i.MX1 family
 
 config ARCH_MX2
 	bool "MX2-based"
 	select CPU_ARM926T
-	select COMMON_CLKDEV
+	select IMX_HAVE_IOMUX_V1
 	help
 	  This enables support for systems based on the Freescale i.MX2 family
 
 config ARCH_MX25
 	bool "MX25-based"
 	select CPU_ARM926T
-	select COMMON_CLKDEV
+	select ARCH_MXC_IOMUX_V3
+	select HAVE_FB_IMX
 	help
 	  This enables support for systems based on the Freescale i.MX25 family
 
 config ARCH_MX3
 	bool "MX3-based"
 	select CPU_V6
-	select COMMON_CLKDEV
 	help
 	  This enables support for systems based on the Freescale i.MX3 family
 
 config ARCH_MXC91231
 	bool "MXC91231-based"
 	select CPU_V6
-	select COMMON_CLKDEV
 	help
 	  This enables support for systems based on the Freescale MXC91231 family
 
+config ARCH_MX5
+	bool "MX5-based"
+	select CPU_V7
+	help
+	  This enables support for systems based on the Freescale i.MX51 family
+
 endchoice
 
 source "arch/arm/mach-mx1/Kconfig"
@@ -48,12 +53,12 @@ source "arch/arm/mach-mx2/Kconfig"
 source "arch/arm/mach-mx3/Kconfig"
 source "arch/arm/mach-mx25/Kconfig"
 source "arch/arm/mach-mxc91231/Kconfig"
+source "arch/arm/mach-mx5/Kconfig"
 
 endmenu
 
 config MXC_IRQ_PRIOR
 	bool "Use IRQ priority"
-	depends on ARCH_MXC
 	help
 	  Select this if you want to use prioritized IRQ handling.
 	  This feature prevents higher priority ISR to be interrupted
@@ -62,9 +67,16 @@ config MXC_IRQ_PRIOR
 	  requirements for timing.
 	  Say N here, unless you have a specialized requirement.
 
+config MXC_TZIC
+	bool "Enable TrustZone Interrupt Controller"
+	depends on ARCH_MX51
+	help
+	  This will be automatically selected for all processors
+	  containing this interrupt controller.
+	  Say N here only if you are really sure.
+
 config MXC_PWM
 	tristate "Enable PWM driver"
-	depends on ARCH_MXC
 	select HAVE_PWM
 	help
 	  Enable support for the i.MX PWM controller(s).
@@ -74,7 +86,9 @@ config MXC_ULPI
 
 config ARCH_HAS_RNGA
 	bool
-	depends on ARCH_MXC
+
+config IMX_HAVE_IOMUX_V1
+	bool
 
 config ARCH_MXC_IOMUX_V3
 	bool
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index 6cee38df58b2..895bc3c5e0c0 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -5,8 +5,12 @@
 # Common support
 obj-y := irq.o clock.o gpio.o time.o devices.o cpu.o system.o
 
-obj-$(CONFIG_ARCH_MX1) += iomux-mx1-mx2.o dma-mx1-mx2.o
-obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o
+# MX51 uses the TZIC interrupt controller, older platforms use AVIC (irq.o)
+obj-$(CONFIG_MXC_TZIC) += tzic.o
+
+obj-$(CONFIG_ARCH_MX1) += dma-mx1-mx2.o
+obj-$(CONFIG_ARCH_MX2) += dma-mx1-mx2.o
+obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o
 obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
 obj-$(CONFIG_MXC_PWM)  += pwm.o
 obj-$(CONFIG_USB_EHCI_MXC) += ehci.o
diff --git a/arch/arm/plat-mxc/audmux-v1.c b/arch/arm/plat-mxc/audmux-v1.c
index da6387dcdf21..b62917ca3f95 100644
--- a/arch/arm/plat-mxc/audmux-v1.c
+++ b/arch/arm/plat-mxc/audmux-v1.c
@@ -50,8 +50,18 @@ EXPORT_SYMBOL_GPL(mxc_audmux_v1_configure_port);
 
 static int mxc_audmux_v1_init(void)
 {
-	if (cpu_is_mx27() || cpu_is_mx21())
-		audmux_base = IO_ADDRESS(AUDMUX_BASE_ADDR);
+#ifdef CONFIG_MACH_MX21
+	if (cpu_is_mx21())
+		audmux_base = MX21_IO_ADDRESS(MX21_AUDMUX_BASE_ADDR);
+	else
+#endif
+#ifdef CONFIG_MACH_MX27
+	if (cpu_is_mx27())
+		audmux_base = MX27_IO_ADDRESS(MX27_AUDMUX_BASE_ADDR);
+	else
+#endif
+		(void)0;
+	
 	return 0;
 }
 
diff --git a/arch/arm/plat-mxc/audmux-v2.c b/arch/arm/plat-mxc/audmux-v2.c
index b06954a84436..d983cd6c788c 100644
--- a/arch/arm/plat-mxc/audmux-v2.c
+++ b/arch/arm/plat-mxc/audmux-v2.c
@@ -190,7 +190,10 @@ static int mxc_audmux_v2_init(void)
 {
 	int ret;
 
-	if (cpu_is_mx35()) {
+	if (cpu_is_mx31())
+		audmux_base = MX31_IO_ADDRESS(MX31_AUDMUX_BASE_ADDR);
+
+	else if (cpu_is_mx35()) {
 		audmux_clk = clk_get(NULL, "audmux");
 		if (IS_ERR(audmux_clk)) {
 			ret = PTR_ERR(audmux_clk);
@@ -198,11 +201,9 @@ static int mxc_audmux_v2_init(void)
 					ret);
 			return ret;
 		}
+		audmux_base = MX35_IO_ADDRESS(MX35_AUDMUX_BASE_ADDR);
 	}
 
-	if (cpu_is_mx31() || cpu_is_mx35())
-		audmux_base = IO_ADDRESS(AUDMUX_BASE_ADDR);
-
 	audmux_debugfs_init();
 
 	return 0;
diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c
index 9e8fbd57495c..323ff8ccc877 100644
--- a/arch/arm/plat-mxc/clock.c
+++ b/arch/arm/plat-mxc/clock.c
@@ -56,6 +56,7 @@ static void __clk_disable(struct clk *clk)
 	__clk_disable(clk->parent);
 	__clk_disable(clk->secondary);
 
+	WARN_ON(!clk->usecount);
 	if (!(--clk->usecount) && clk->disable)
 		clk->disable(clk);
 }
diff --git a/arch/arm/plat-mxc/dma-mx1-mx2.c b/arch/arm/plat-mxc/dma-mx1-mx2.c
index 9c1b3f9c4f4d..e16014b0d13c 100644
--- a/arch/arm/plat-mxc/dma-mx1-mx2.c
+++ b/arch/arm/plat-mxc/dma-mx1-mx2.c
@@ -128,6 +128,18 @@ struct imx_dma_channel {
 	int hw_chaining;
 };
 
+static void __iomem *imx_dmav1_baseaddr;
+
+static void imx_dmav1_writel(unsigned val, unsigned offset)
+{
+	__raw_writel(val, imx_dmav1_baseaddr + offset);
+}
+
+static unsigned imx_dmav1_readl(unsigned offset)
+{
+	return __raw_readl(imx_dmav1_baseaddr + offset);
+}
+
 static struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS];
 
 static struct clk *dma_clk;
@@ -140,7 +152,6 @@ static int imx_dma_hw_chain(struct imx_dma_channel *imxdma)
 		return 0;
 }
 
-
 /*
  * imx_dma_sg_next - prepare next chunk for scatter-gather DMA emulation
  */
@@ -160,17 +171,17 @@ static inline int imx_dma_sg_next(int channel, struct scatterlist *sg)
 		imxdma->resbytes -= now;
 
 	if ((imxdma->dma_mode & DMA_MODE_MASK) == DMA_MODE_READ)
-		__raw_writel(sg->dma_address, DMA_BASE + DMA_DAR(channel));
+		imx_dmav1_writel(sg->dma_address, DMA_DAR(channel));
 	else
-		__raw_writel(sg->dma_address, DMA_BASE + DMA_SAR(channel));
+		imx_dmav1_writel(sg->dma_address, DMA_SAR(channel));
 
-	__raw_writel(now, DMA_BASE + DMA_CNTR(channel));
+	imx_dmav1_writel(now, DMA_CNTR(channel));
 
 	pr_debug("imxdma%d: next sg chunk dst 0x%08x, src 0x%08x, "
 		"size 0x%08x\n", channel,
-		 __raw_readl(DMA_BASE + DMA_DAR(channel)),
-		 __raw_readl(DMA_BASE + DMA_SAR(channel)),
-		 __raw_readl(DMA_BASE + DMA_CNTR(channel)));
+		 imx_dmav1_readl(DMA_DAR(channel)),
+		 imx_dmav1_readl(DMA_SAR(channel)),
+		 imx_dmav1_readl(DMA_CNTR(channel)));
 
 	return now;
 }
@@ -218,27 +229,26 @@ imx_dma_setup_single(int channel, dma_addr_t dma_address,
 			channel, __func__, (unsigned int)dma_address,
 			dma_length, dev_addr);
 
-		__raw_writel(dev_addr, DMA_BASE + DMA_SAR(channel));
-		__raw_writel(dma_address, DMA_BASE + DMA_DAR(channel));
-		__raw_writel(imxdma->ccr_from_device,
-				DMA_BASE + DMA_CCR(channel));
+		imx_dmav1_writel(dev_addr, DMA_SAR(channel));
+		imx_dmav1_writel(dma_address, DMA_DAR(channel));
+		imx_dmav1_writel(imxdma->ccr_from_device, DMA_CCR(channel));
 	} else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) {
 		pr_debug("imxdma%d: %s dma_addressg=0x%08x dma_length=%d "
 			"dev_addr=0x%08x for write\n",
 			channel, __func__, (unsigned int)dma_address,
 			dma_length, dev_addr);
 
-		__raw_writel(dma_address, DMA_BASE + DMA_SAR(channel));
-		__raw_writel(dev_addr, DMA_BASE + DMA_DAR(channel));
-		__raw_writel(imxdma->ccr_to_device,
-				DMA_BASE + DMA_CCR(channel));
+		imx_dmav1_writel(dma_address, DMA_SAR(channel));
+		imx_dmav1_writel(dev_addr, DMA_DAR(channel));
+		imx_dmav1_writel(imxdma->ccr_to_device,
+				DMA_CCR(channel));
 	} else {
 		printk(KERN_ERR "imxdma%d: imx_dma_setup_single bad dmamode\n",
 		       channel);
 		return -EINVAL;
 	}
 
-	__raw_writel(dma_length, DMA_BASE + DMA_CNTR(channel));
+	imx_dmav1_writel(dma_length, DMA_CNTR(channel));
 
 	return 0;
 }
@@ -316,17 +326,15 @@ imx_dma_setup_sg(int channel,
 			"dev_addr=0x%08x for read\n",
 			channel, __func__, sg, sgcount, dma_length, dev_addr);
 
-		__raw_writel(dev_addr, DMA_BASE + DMA_SAR(channel));
-		__raw_writel(imxdma->ccr_from_device,
-				DMA_BASE + DMA_CCR(channel));
+		imx_dmav1_writel(dev_addr, DMA_SAR(channel));
+		imx_dmav1_writel(imxdma->ccr_from_device, DMA_CCR(channel));
 	} else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) {
 		pr_debug("imxdma%d: %s sg=%p sgcount=%d total length=%d "
 			"dev_addr=0x%08x for write\n",
 			channel, __func__, sg, sgcount, dma_length, dev_addr);
 
-		__raw_writel(dev_addr, DMA_BASE + DMA_DAR(channel));
-		__raw_writel(imxdma->ccr_to_device,
-				DMA_BASE + DMA_CCR(channel));
+		imx_dmav1_writel(dev_addr, DMA_DAR(channel));
+		imx_dmav1_writel(imxdma->ccr_to_device, DMA_CCR(channel));
 	} else {
 		printk(KERN_ERR "imxdma%d: imx_dma_setup_sg bad dmamode\n",
 		       channel);
@@ -360,7 +368,7 @@ imx_dma_config_channel(int channel, unsigned int config_port,
 	imxdma->ccr_from_device = config_port | (config_mem << 2) | dreq;
 	imxdma->ccr_to_device = config_mem | (config_port << 2) | dreq;
 
-	__raw_writel(dmareq, DMA_BASE + DMA_RSSR(channel));
+	imx_dmav1_writel(dmareq, DMA_RSSR(channel));
 
 	return 0;
 }
@@ -368,7 +376,7 @@ EXPORT_SYMBOL(imx_dma_config_channel);
 
 void imx_dma_config_burstlen(int channel, unsigned int burstlen)
 {
-	__raw_writel(burstlen, DMA_BASE + DMA_BLR(channel));
+	imx_dmav1_writel(burstlen, DMA_BLR(channel));
 }
 EXPORT_SYMBOL(imx_dma_config_burstlen);
 
@@ -398,7 +406,7 @@ imx_dma_setup_handlers(int channel,
 	}
 
 	local_irq_save(flags);
-	__raw_writel(1 << channel, DMA_BASE + DMA_DISR);
+	imx_dmav1_writel(1 << channel, DMA_DISR);
 	imxdma->irq_handler = irq_handler;
 	imxdma->err_handler = err_handler;
 	imxdma->data = data;
@@ -462,22 +470,21 @@ void imx_dma_enable(int channel)
 
 	local_irq_save(flags);
 
-	__raw_writel(1 << channel, DMA_BASE + DMA_DISR);
-	__raw_writel(__raw_readl(DMA_BASE + DMA_DIMR) & ~(1 << channel),
-		DMA_BASE + DMA_DIMR);
-	__raw_writel(__raw_readl(DMA_BASE + DMA_CCR(channel)) | CCR_CEN |
-		CCR_ACRPT,
-		DMA_BASE + DMA_CCR(channel));
+	imx_dmav1_writel(1 << channel, DMA_DISR);
+	imx_dmav1_writel(imx_dmav1_readl(DMA_DIMR) & ~(1 << channel), DMA_DIMR);
+	imx_dmav1_writel(imx_dmav1_readl(DMA_CCR(channel)) | CCR_CEN |
+		CCR_ACRPT, DMA_CCR(channel));
 
 #ifdef CONFIG_ARCH_MX2
-	if (imxdma->sg && imx_dma_hw_chain(imxdma)) {
+	if ((cpu_is_mx21() || cpu_is_mx27()) &&
+			imxdma->sg && imx_dma_hw_chain(imxdma)) {
 		imxdma->sg = sg_next(imxdma->sg);
 		if (imxdma->sg) {
 			u32 tmp;
 			imx_dma_sg_next(channel, imxdma->sg);
-			tmp = __raw_readl(DMA_BASE + DMA_CCR(channel));
-			__raw_writel(tmp | CCR_RPT | CCR_ACRPT,
-				DMA_BASE + DMA_CCR(channel));
+			tmp = imx_dmav1_readl(DMA_CCR(channel));
+			imx_dmav1_writel(tmp | CCR_RPT | CCR_ACRPT,
+				DMA_CCR(channel));
 		}
 	}
 #endif
@@ -502,11 +509,10 @@ void imx_dma_disable(int channel)
 		del_timer(&imxdma->watchdog);
 
 	local_irq_save(flags);
-	__raw_writel(__raw_readl(DMA_BASE + DMA_DIMR) | (1 << channel),
-		DMA_BASE + DMA_DIMR);
-	__raw_writel(__raw_readl(DMA_BASE + DMA_CCR(channel)) & ~CCR_CEN,
-		DMA_BASE + DMA_CCR(channel));
-	__raw_writel(1 << channel, DMA_BASE + DMA_DISR);
+	imx_dmav1_writel(imx_dmav1_readl(DMA_DIMR) | (1 << channel), DMA_DIMR);
+	imx_dmav1_writel(imx_dmav1_readl(DMA_CCR(channel)) & ~CCR_CEN,
+			DMA_CCR(channel));
+	imx_dmav1_writel(1 << channel, DMA_DISR);
 	imxdma->in_use = 0;
 	local_irq_restore(flags);
 }
@@ -517,7 +523,7 @@ static void imx_dma_watchdog(unsigned long chno)
 {
 	struct imx_dma_channel *imxdma = &imx_dma_channels[chno];
 
-	__raw_writel(0, DMA_BASE + DMA_CCR(chno));
+	imx_dmav1_writel(0, DMA_CCR(chno));
 	imxdma->in_use = 0;
 	imxdma->sg = NULL;
 
@@ -533,17 +539,17 @@ static irqreturn_t dma_err_handler(int irq, void *dev_id)
 	unsigned int err_mask;
 	int errcode;
 
-	disr = __raw_readl(DMA_BASE + DMA_DISR);
+	disr = imx_dmav1_readl(DMA_DISR);
 
-	err_mask = __raw_readl(DMA_BASE + DMA_DBTOSR) |
-		   __raw_readl(DMA_BASE + DMA_DRTOSR) |
-		   __raw_readl(DMA_BASE + DMA_DSESR)  |
-		   __raw_readl(DMA_BASE + DMA_DBOSR);
+	err_mask = imx_dmav1_readl(DMA_DBTOSR) |
+		   imx_dmav1_readl(DMA_DRTOSR) |
+		   imx_dmav1_readl(DMA_DSESR)  |
+		   imx_dmav1_readl(DMA_DBOSR);
 
 	if (!err_mask)
 		return IRQ_HANDLED;
 
-	__raw_writel(disr & err_mask, DMA_BASE + DMA_DISR);
+	imx_dmav1_writel(disr & err_mask, DMA_DISR);
 
 	for (i = 0; i < IMX_DMA_CHANNELS; i++) {
 		if (!(err_mask & (1 << i)))
@@ -551,20 +557,20 @@ static irqreturn_t dma_err_handler(int irq, void *dev_id)
 		imxdma = &imx_dma_channels[i];
 		errcode = 0;
 
-		if (__raw_readl(DMA_BASE + DMA_DBTOSR) & (1 << i)) {
-			__raw_writel(1 << i, DMA_BASE + DMA_DBTOSR);
+		if (imx_dmav1_readl(DMA_DBTOSR) & (1 << i)) {
+			imx_dmav1_writel(1 << i, DMA_DBTOSR);
 			errcode |= IMX_DMA_ERR_BURST;
 		}
-		if (__raw_readl(DMA_BASE + DMA_DRTOSR) & (1 << i)) {
-			__raw_writel(1 << i, DMA_BASE + DMA_DRTOSR);
+		if (imx_dmav1_readl(DMA_DRTOSR) & (1 << i)) {
+			imx_dmav1_writel(1 << i, DMA_DRTOSR);
 			errcode |= IMX_DMA_ERR_REQUEST;
 		}
-		if (__raw_readl(DMA_BASE + DMA_DSESR) & (1 << i)) {
-			__raw_writel(1 << i, DMA_BASE + DMA_DSESR);
+		if (imx_dmav1_readl(DMA_DSESR) & (1 << i)) {
+			imx_dmav1_writel(1 << i, DMA_DSESR);
 			errcode |= IMX_DMA_ERR_TRANSFER;
 		}
-		if (__raw_readl(DMA_BASE + DMA_DBOSR) & (1 << i)) {
-			__raw_writel(1 << i, DMA_BASE + DMA_DBOSR);
+		if (imx_dmav1_readl(DMA_DBOSR) & (1 << i)) {
+			imx_dmav1_writel(1 << i, DMA_DBOSR);
 			errcode |= IMX_DMA_ERR_BUFFER;
 		}
 		if (imxdma->name && imxdma->err_handler) {
@@ -607,7 +613,7 @@ static void dma_irq_handle_channel(int chno)
 		if (imxdma->sg) {
 			imx_dma_sg_next(chno, imxdma->sg);
 
-			tmp = __raw_readl(DMA_BASE + DMA_CCR(chno));
+			tmp = imx_dmav1_readl(DMA_CCR(chno));
 
 			if (imx_dma_hw_chain(imxdma)) {
 				/* FIXME: The timeout should probably be
@@ -617,15 +623,13 @@ static void dma_irq_handle_channel(int chno)
 					jiffies + msecs_to_jiffies(500));
 
 				tmp |= CCR_CEN | CCR_RPT | CCR_ACRPT;
-				__raw_writel(tmp, DMA_BASE +
-						DMA_CCR(chno));
+				imx_dmav1_writel(tmp, DMA_CCR(chno));
 			} else {
-				__raw_writel(tmp & ~CCR_CEN, DMA_BASE +
-						DMA_CCR(chno));
+				imx_dmav1_writel(tmp & ~CCR_CEN, DMA_CCR(chno));
 				tmp |= CCR_CEN;
 			}
 
-			__raw_writel(tmp, DMA_BASE + DMA_CCR(chno));
+			imx_dmav1_writel(tmp, DMA_CCR(chno));
 
 			if (imxdma->prog_handler)
 				imxdma->prog_handler(chno, imxdma->data,
@@ -640,7 +644,7 @@ static void dma_irq_handle_channel(int chno)
 		}
 	}
 
-	__raw_writel(0, DMA_BASE + DMA_CCR(chno));
+	imx_dmav1_writel(0, DMA_CCR(chno));
 	imxdma->in_use = 0;
 	if (imxdma->irq_handler)
 		imxdma->irq_handler(chno, imxdma->data);
@@ -651,15 +655,16 @@ static irqreturn_t dma_irq_handler(int irq, void *dev_id)
 	int i, disr;
 
 #ifdef CONFIG_ARCH_MX2
-	dma_err_handler(irq, dev_id);
+	if (cpu_is_mx21() || cpu_is_mx27())
+		dma_err_handler(irq, dev_id);
 #endif
 
-	disr = __raw_readl(DMA_BASE + DMA_DISR);
+	disr = imx_dmav1_readl(DMA_DISR);
 
 	pr_debug("imxdma: dma_irq_handler called, disr=0x%08x\n",
 		     disr);
 
-	__raw_writel(disr, DMA_BASE + DMA_DISR);
+	imx_dmav1_writel(disr, DMA_DISR);
 	for (i = 0; i < IMX_DMA_CHANNELS; i++) {
 		if (disr & (1 << i))
 			dma_irq_handle_channel(i);
@@ -699,17 +704,19 @@ int imx_dma_request(int channel, const char *name)
 	local_irq_restore(flags); /* request_irq() can block */
 
 #ifdef CONFIG_ARCH_MX2
-	ret = request_irq(MXC_INT_DMACH0 + channel, dma_irq_handler, 0, "DMA",
-			NULL);
-	if (ret) {
-		imxdma->name = NULL;
-		printk(KERN_CRIT "Can't register IRQ %d for DMA channel %d\n",
-				MXC_INT_DMACH0 + channel, channel);
-		return ret;
+	if (cpu_is_mx21() || cpu_is_mx27()) {
+		ret = request_irq(MX2x_INT_DMACH0 + channel,
+				dma_irq_handler, 0, "DMA", NULL);
+		if (ret) {
+			imxdma->name = NULL;
+			pr_crit("Can't register IRQ %d for DMA channel %d\n",
+					MX2x_INT_DMACH0 + channel, channel);
+			return ret;
+		}
+		init_timer(&imxdma->watchdog);
+		imxdma->watchdog.function = &imx_dma_watchdog;
+		imxdma->watchdog.data = channel;
 	}
-	init_timer(&imxdma->watchdog);
-	imxdma->watchdog.function = &imx_dma_watchdog;
-	imxdma->watchdog.data = channel;
 #endif
 
 	return ret;
@@ -738,7 +745,8 @@ void imx_dma_free(int channel)
 	imxdma->name = NULL;
 
 #ifdef CONFIG_ARCH_MX2
-	free_irq(MXC_INT_DMACH0 + channel, NULL);
+	if (cpu_is_mx21() || cpu_is_mx27())
+		free_irq(MX2x_INT_DMACH0 + channel, NULL);
 #endif
 
 	local_irq_restore(flags);
@@ -796,34 +804,53 @@ static int __init imx_dma_init(void)
 	int ret = 0;
 	int i;
 
+#ifdef CONFIG_ARCH_MX1
+	if (cpu_is_mx1())
+		imx_dmav1_baseaddr = MX1_IO_ADDRESS(MX1_DMA_BASE_ADDR);
+	else
+#endif
+#ifdef CONFIG_MACH_MX21
+	if (cpu_is_mx21())
+		imx_dmav1_baseaddr = MX21_IO_ADDRESS(MX21_DMA_BASE_ADDR);
+	else
+#endif
+#ifdef CONFIG_MACH_MX27
+	if (cpu_is_mx27())
+		imx_dmav1_baseaddr = MX27_IO_ADDRESS(MX27_DMA_BASE_ADDR);
+	else
+#endif
+		BUG();
+
 	dma_clk = clk_get(NULL, "dma");
 	clk_enable(dma_clk);
 
 	/* reset DMA module */
-	__raw_writel(DCR_DRST, DMA_BASE + DMA_DCR);
+	imx_dmav1_writel(DCR_DRST, DMA_DCR);
 
 #ifdef CONFIG_ARCH_MX1
-	ret = request_irq(DMA_INT, dma_irq_handler, 0, "DMA", NULL);
-	if (ret) {
-		printk(KERN_CRIT "Wow!  Can't register IRQ for DMA\n");
-		return ret;
-	}
+	if (cpu_is_mx1()) {
+		ret = request_irq(MX1_DMA_INT, dma_irq_handler, 0, "DMA", NULL);
+		if (ret) {
+			pr_crit("Wow!  Can't register IRQ for DMA\n");
+			return ret;
+		}
 
-	ret = request_irq(DMA_ERR, dma_err_handler, 0, "DMA", NULL);
-	if (ret) {
-		printk(KERN_CRIT "Wow!  Can't register ERRIRQ for DMA\n");
-		free_irq(DMA_INT, NULL);
-		return ret;
+		ret = request_irq(MX1_DMA_ERR, dma_err_handler, 0, "DMA", NULL);
+		if (ret) {
+			pr_crit("Wow!  Can't register ERRIRQ for DMA\n");
+			free_irq(MX1_DMA_INT, NULL);
+			return ret;
+		}
 	}
 #endif
 	/* enable DMA module */
-	__raw_writel(DCR_DEN, DMA_BASE + DMA_DCR);
+	imx_dmav1_writel(DCR_DEN, DMA_DCR);
 
 	/* clear all interrupts */
-	__raw_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_BASE + DMA_DISR);
+	imx_dmav1_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_DISR);
 
 	/* disable interrupts */
-	__raw_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_BASE + DMA_DIMR);
+	imx_dmav1_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_DIMR);
 
 	for (i = 0; i < IMX_DMA_CHANNELS; i++) {
 		imx_dma_channels[i].sg = NULL;
diff --git a/arch/arm/plat-mxc/ehci.c b/arch/arm/plat-mxc/ehci.c
index 41599be882e8..cb0b63874482 100644
--- a/arch/arm/plat-mxc/ehci.c
+++ b/arch/arm/plat-mxc/ehci.c
@@ -25,25 +25,37 @@
 #define USBCTRL_OTGBASE_OFFSET	0x600
 
 #define MX31_OTG_SIC_SHIFT	29
-#define MX31_OTG_SIC_MASK	(0xf << MX31_OTG_SIC_SHIFT)
+#define MX31_OTG_SIC_MASK	(0x3 << MX31_OTG_SIC_SHIFT)
 #define MX31_OTG_PM_BIT		(1 << 24)
 
 #define MX31_H2_SIC_SHIFT	21
-#define MX31_H2_SIC_MASK	(0xf << MX31_H2_SIC_SHIFT)
+#define MX31_H2_SIC_MASK	(0x3 << MX31_H2_SIC_SHIFT)
 #define MX31_H2_PM_BIT		(1 << 16)
 #define MX31_H2_DT_BIT		(1 << 5)
 
 #define MX31_H1_SIC_SHIFT	13
-#define MX31_H1_SIC_MASK	(0xf << MX31_H1_SIC_SHIFT)
+#define MX31_H1_SIC_MASK	(0x3 << MX31_H1_SIC_SHIFT)
 #define MX31_H1_PM_BIT		(1 << 8)
 #define MX31_H1_DT_BIT		(1 << 4)
 
+#define MX35_OTG_SIC_SHIFT	29
+#define MX35_OTG_SIC_MASK	(0x3 << MX35_OTG_SIC_SHIFT)
+#define MX35_OTG_PM_BIT		(1 << 24)
+
+#define MX35_H1_SIC_SHIFT	21
+#define MX35_H1_SIC_MASK	(0x3 << MX35_H1_SIC_SHIFT)
+#define MX35_H1_PM_BIT		(1 << 8)
+#define MX35_H1_IPPUE_UP_BIT	(1 << 7)
+#define MX35_H1_IPPUE_DOWN_BIT	(1 << 6)
+#define MX35_H1_TLL_BIT		(1 << 5)
+#define MX35_H1_USBTE_BIT	(1 << 4)
+
 int mxc_set_usbcontrol(int port, unsigned int flags)
 {
 	unsigned int v;
-
+#ifdef CONFIG_ARCH_MX3
 	if (cpu_is_mx31()) {
-		v = readl(IO_ADDRESS(MX31_OTG_BASE_ADDR +
+		v = readl(MX31_IO_ADDRESS(MX31_OTG_BASE_ADDR +
 				     USBCTRL_OTGBASE_OFFSET));
 
 		switch (port) {
@@ -51,15 +63,15 @@ int mxc_set_usbcontrol(int port, unsigned int flags)
 			v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT);
 			v |= (flags & MXC_EHCI_INTERFACE_MASK)
 					<< MX31_OTG_SIC_SHIFT;
-			if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
 				v |= MX31_OTG_PM_BIT;
 
 			break;
 		case 1: /* H1 port */
-			v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT);
+			v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT);
 			v |= (flags & MXC_EHCI_INTERFACE_MASK)
 						<< MX31_H1_SIC_SHIFT;
-			if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
 				v |= MX31_H1_PM_BIT;
 
 			if (!(flags & MXC_EHCI_TTL_ENABLED))
@@ -67,7 +79,7 @@ int mxc_set_usbcontrol(int port, unsigned int flags)
 
 			break;
 		case 2:	/* H2 port */
-			v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT);
+			v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT);
 			v |= (flags & MXC_EHCI_INTERFACE_MASK)
 						<< MX31_H2_SIC_SHIFT;
 			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
@@ -77,13 +89,103 @@ int mxc_set_usbcontrol(int port, unsigned int flags)
 				v |= MX31_H2_DT_BIT;
 
 			break;
+		default:
+			return -EINVAL;
 		}
 
-		writel(v, IO_ADDRESS(MX31_OTG_BASE_ADDR +
+		writel(v, MX31_IO_ADDRESS(MX31_OTG_BASE_ADDR +
 				     USBCTRL_OTGBASE_OFFSET));
 		return 0;
 	}
 
+	if (cpu_is_mx35()) {
+		v = readl(MX35_IO_ADDRESS(MX35_OTG_BASE_ADDR +
+				     USBCTRL_OTGBASE_OFFSET));
+
+		switch (port) {
+		case 0:	/* OTG port */
+			v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT);
+			v |= (flags & MXC_EHCI_INTERFACE_MASK)
+					<< MX35_OTG_SIC_SHIFT;
+			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+				v |= MX35_OTG_PM_BIT;
+
+			break;
+		case 1: /* H1 port */
+			v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_TLL_BIT |
+				MX35_H1_USBTE_BIT | MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT);
+			v |= (flags & MXC_EHCI_INTERFACE_MASK)
+						<< MX35_H1_SIC_SHIFT;
+			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+				v |= MX35_H1_PM_BIT;
+
+			if (!(flags & MXC_EHCI_TTL_ENABLED))
+				v |= MX35_H1_TLL_BIT;
+
+			if (flags & MXC_EHCI_INTERNAL_PHY)
+				v |= MX35_H1_USBTE_BIT;
+
+			if (flags & MXC_EHCI_IPPUE_DOWN)
+				v |= MX35_H1_IPPUE_DOWN_BIT;
+
+			if (flags & MXC_EHCI_IPPUE_UP)
+				v |= MX35_H1_IPPUE_UP_BIT;
+
+			break;
+		default:
+			return -EINVAL;
+		}
+
+		writel(v, MX35_IO_ADDRESS(MX35_OTG_BASE_ADDR +
+				     USBCTRL_OTGBASE_OFFSET));
+		return 0;
+	}
+#endif /* CONFIG_ARCH_MX3 */
+#ifdef CONFIG_MACH_MX27
+	if (cpu_is_mx27()) {
+		/* On i.MX27 we can use the i.MX31 USBCTRL bits, they
+		 * are identical
+		 */
+		v = readl(MX27_IO_ADDRESS(MX27_OTG_BASE_ADDR +
+				     USBCTRL_OTGBASE_OFFSET));
+		switch (port) {
+		case 0:	/* OTG port */
+			v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT);
+			v |= (flags & MXC_EHCI_INTERFACE_MASK)
+					<< MX31_OTG_SIC_SHIFT;
+			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+				v |= MX31_OTG_PM_BIT;
+			break;
+		case 1: /* H1 port */
+			v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT);
+			v |= (flags & MXC_EHCI_INTERFACE_MASK)
+						<< MX31_H1_SIC_SHIFT;
+			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+				v |= MX31_H1_PM_BIT;
+
+			if (!(flags & MXC_EHCI_TTL_ENABLED))
+				v |= MX31_H1_DT_BIT;
+
+			break;
+		case 2:	/* H2 port */
+			v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT);
+			v |= (flags & MXC_EHCI_INTERFACE_MASK)
+						<< MX31_H2_SIC_SHIFT;
+			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+				v |= MX31_H2_PM_BIT;
+
+			if (!(flags & MXC_EHCI_TTL_ENABLED))
+				v |= MX31_H2_DT_BIT;
+
+			break;
+		default:
+			return -EINVAL;
+		}
+		writel(v, MX27_IO_ADDRESS(MX27_OTG_BASE_ADDR +
+				     USBCTRL_OTGBASE_OFFSET));
+		return 0;
+	}
+#endif /* CONFIG_MACH_MX27 */
 	printk(KERN_WARNING
 		"%s() unable to setup USBCONTROL for this CPU\n", __func__);
 	return -EINVAL;
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index d65ebe303b9f..70b23893f094 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -140,16 +140,13 @@ static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio)
 	val = __raw_readl(reg);
 	edge = (val >> (bit << 1)) & 3;
 	val &= ~(0x3 << (bit << 1));
-	switch (edge) {
-	case GPIO_INT_HIGH_LEV:
+	if (edge == GPIO_INT_HIGH_LEV) {
 		edge = GPIO_INT_LOW_LEV;
 		pr_debug("mxc: switch GPIO %d to low trigger\n", gpio);
-		break;
-	case GPIO_INT_LOW_LEV:
+	} else if (edge == GPIO_INT_LOW_LEV) {
 		edge = GPIO_INT_HIGH_LEV;
 		pr_debug("mxc: switch GPIO %d to high trigger\n", gpio);
-		break;
-	default:
+	} else {
 		pr_err("mxc: invalid configuration for GPIO %d: %x\n",
 		       gpio, edge);
 		return;
@@ -157,25 +154,20 @@ static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio)
 	__raw_writel(val | (edge << (bit << 1)), reg);
 }
 
-/* handle n interrupts in one status register */
+/* handle 32 interrupts in one status register */
 static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
 {
-	u32 gpio_irq_no;
+	u32 gpio_irq_no_base = port->virtual_irq_start;
 
-	gpio_irq_no = port->virtual_irq_start;
-	for (; irq_stat != 0; irq_stat >>= 1, gpio_irq_no++) {
-		u32 gpio = irq_to_gpio(gpio_irq_no);
-
-		if ((irq_stat & 1) == 0)
-			continue;
+	while (irq_stat != 0) {
+		int irqoffset = fls(irq_stat) - 1;
 
-		BUG_ON(!(irq_desc[gpio_irq_no].handle_irq));
+		if (port->both_edges & (1 << irqoffset))
+			mxc_flip_edge(port, irqoffset);
 
-		if (port->both_edges & (1 << (gpio & 31)))
-			mxc_flip_edge(port, gpio);
+		generic_handle_irq(gpio_irq_no_base + irqoffset);
 
-		irq_desc[gpio_irq_no].handle_irq(gpio_irq_no,
-				&irq_desc[gpio_irq_no]);
+		irq_stat &= ~(1 << irqoffset);
 	}
 }
 
diff --git a/arch/arm/plat-mxc/include/mach/board-kzmarm11.h b/arch/arm/plat-mxc/include/mach/board-kzmarm11.h
index 05ff2f31ef1f..93cc66f104c7 100644
--- a/arch/arm/plat-mxc/include/mach/board-kzmarm11.h
+++ b/arch/arm/plat-mxc/include/mach/board-kzmarm11.h
@@ -21,19 +21,19 @@
 /*
  *  KZM-ARM11-01 Board Control Registers on FPGA
  */
-#define KZM_ARM11_CTL1		(CS4_BASE_ADDR + 0x1000)
-#define KZM_ARM11_CTL2		(CS4_BASE_ADDR + 0x1001)
-#define KZM_ARM11_RSW1		(CS4_BASE_ADDR + 0x1002)
-#define KZM_ARM11_BACK_LIGHT	(CS4_BASE_ADDR + 0x1004)
-#define KZM_ARM11_FPGA_REV	(CS4_BASE_ADDR + 0x1008)
-#define KZM_ARM11_7SEG_LED	(CS4_BASE_ADDR + 0x1010)
-#define KZM_ARM11_LEDS		(CS4_BASE_ADDR + 0x1020)
-#define KZM_ARM11_DIPSW2	(CS4_BASE_ADDR + 0x1003)
+#define KZM_ARM11_CTL1		(MX31_CS4_BASE_ADDR + 0x1000)
+#define KZM_ARM11_CTL2		(MX31_CS4_BASE_ADDR + 0x1001)
+#define KZM_ARM11_RSW1		(MX31_CS4_BASE_ADDR + 0x1002)
+#define KZM_ARM11_BACK_LIGHT	(MX31_CS4_BASE_ADDR + 0x1004)
+#define KZM_ARM11_FPGA_REV	(MX31_CS4_BASE_ADDR + 0x1008)
+#define KZM_ARM11_7SEG_LED	(MX31_CS4_BASE_ADDR + 0x1010)
+#define KZM_ARM11_LEDS		(MX31_CS4_BASE_ADDR + 0x1020)
+#define KZM_ARM11_DIPSW2	(MX31_CS4_BASE_ADDR + 0x1003)
 
 /*
  * External UART for touch panel on FPGA
  */
-#define KZM_ARM11_16550		(CS4_BASE_ADDR + 0x1050)
+#define KZM_ARM11_16550		(MX31_CS4_BASE_ADDR + 0x1050)
 
 #endif /* __ARM_ARCH_BOARD_KZM_ARM11_H */
 
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
index 2cbfa35e82ff..095a199591c6 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
@@ -14,7 +14,7 @@
 #include <mach/hardware.h>
 
 /* Base address of PBC controller */
-#define PBC_BASE_ADDRESS        IO_ADDRESS(CS4_BASE_ADDR)
+#define PBC_BASE_ADDRESS        MX31_CS4_BASE_ADDR_VIRT
 /* Offsets for the PBC Controller register */
 
 /* PBC Board status register offset */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
index d5be6b5a6acf..fc5fec9b55f0 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
@@ -25,6 +25,7 @@ enum mx31moboard_boards {
 	MX31NOBOARD	= 0,
 	MX31DEVBOARD	= 1,
 	MX31MARXBOT	= 2,
+	MX31SMARTBOT	= 3,
 };
 
 /*
@@ -34,6 +35,7 @@ enum mx31moboard_boards {
 
 extern void mx31moboard_devboard_init(void);
 extern void mx31moboard_marxbot_init(void);
+extern void mx31moboard_smartbot_init(void);
 
 #endif
 
diff --git a/arch/arm/plat-mxc/include/mach/clock.h b/arch/arm/plat-mxc/include/mach/clock.h
index 43a82d0c534d..753a5988d85c 100644
--- a/arch/arm/plat-mxc/include/mach/clock.h
+++ b/arch/arm/plat-mxc/include/mach/clock.h
@@ -26,13 +26,6 @@
 struct module;
 
 struct clk {
-#ifndef CONFIG_COMMON_CLKDEV
-	/* As soon as i.MX1 and i.MX31 switched to clkdev, this
-	 * block can go away */
-	struct list_head node;
-	struct module *owner;
-	const char *name;
-#endif
 	int id;
 	/* Source clock this clk depends on */
 	struct clk *parent;
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 4bf1068ffad9..2941472582d2 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -20,14 +20,17 @@ extern void mx25_map_io(void);
 extern void mx27_map_io(void);
 extern void mx31_map_io(void);
 extern void mx35_map_io(void);
+extern void mx51_map_io(void);
 extern void mxc91231_map_io(void);
 extern void mxc_init_irq(void __iomem *);
+extern void tzic_init_irq(void __iomem *);
 extern void mx1_init_irq(void);
 extern void mx21_init_irq(void);
 extern void mx25_init_irq(void);
 extern void mx27_init_irq(void);
 extern void mx31_init_irq(void);
 extern void mx35_init_irq(void);
+extern void mx51_init_irq(void);
 extern void mxc91231_init_irq(void);
 extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
 extern int mx1_clocks_init(unsigned long fref);
@@ -36,6 +39,8 @@ extern int mx25_clocks_init(void);
 extern int mx27_clocks_init(unsigned long fref);
 extern int mx31_clocks_init(unsigned long fref);
 extern int mx35_clocks_init(void);
+extern int mx51_clocks_init(unsigned long ckil, unsigned long osc,
+			unsigned long ckih1, unsigned long ckih2);
 extern int mxc91231_clocks_init(unsigned long fref);
 extern int mxc_register_gpios(void);
 extern int mxc_register_device(struct platform_device *pdev, void *data);
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index 5a6ae1b9e1e8..0b6e11eaeb8c 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -10,6 +10,7 @@
  * published by the Free Software Foundation.
  *
  */
+#define IMX_NEEDS_DEPRECATED_SYMBOLS
 
 #ifdef CONFIG_ARCH_MX1
 #include <mach/mx1.h>
@@ -44,13 +45,22 @@
 #define UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
 #endif
 
+#ifdef CONFIG_ARCH_MX5
+#ifdef UART_PADDR
+#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
+#endif
+#include <mach/mx51.h>
+#define UART_PADDR	MX51_UART1_BASE_ADDR
+#define UART_VADDR	MX51_AIPS1_IO_ADDRESS(MX51_UART1_BASE_ADDR)
+#endif
+
 #ifdef CONFIG_ARCH_MXC91231
 #ifdef UART_PADDR
 #error "CONFIG_DEBUG_LL is incompatible with multiple archs"
 #endif
 #include <mach/mxc91231.h>
 #define UART_PADDR	MXC91231_UART2_BASE_ADDR
-#define UART_VADDR	MXC91231_AIPS1_IO_ADDRESS(MXC91231_UART2_BASE_ADDR)
+#define UART_VADDR	MXC91231_IO_ADDRESS(MXC91231_UART2_BASE_ADDR)
 #endif
 		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S
index 7cf290efe768..aeb08697726b 100644
--- a/arch/arm/plat-mxc/include/mach/entry-macro.S
+++ b/arch/arm/plat-mxc/include/mach/entry-macro.S
@@ -1,6 +1,6 @@
 /*
  *  Copyright (C) 2007 Lennert Buytenhek <buytenh@wantstofly.org>
- *  Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *  Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved.
  */
 
 /*
@@ -18,11 +18,16 @@
 	.endm
 
 	.macro  get_irqnr_preamble, base, tmp
+#ifndef CONFIG_MXC_TZIC
 	ldr	\base, =avic_base
 	ldr	\base, [\base]
 #ifdef CONFIG_MXC_IRQ_PRIOR
 	ldr	r4, [\base, #AVIC_NIMASK]
 #endif
+#elif defined CONFIG_MXC_TZIC
+	ldr	\base, =tzic_base
+	ldr	\base, [\base]
+#endif /* CONFIG_MXC_TZIC */
 	.endm
 
 	.macro  arch_ret_to_user, tmp1, tmp2
@@ -32,6 +37,7 @@
 	@ and returns its number in irqnr
 	@ and returns if an interrupt occured in irqstat
 	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+#ifndef CONFIG_MXC_TZIC
 	@ Load offset & priority of the highest priority
 	@ interrupt pending from AVIC_NIVECSR
 	ldr	\irqstat, [\base, #0x40]
@@ -45,6 +51,32 @@
 	strne	\tmp, [\base, #AVIC_NIMASK]
 	streq	r4, [\base, #AVIC_NIMASK]
 #endif
+#elif defined CONFIG_MXC_TZIC
+	@ Load offset & priority of the highest priority
+	@ interrupt pending.
+	@ 0xD80 is HIPND0 register
+	mov     \irqnr, #0
+	mov     \irqstat, #0x0D80
+1000:
+	ldr     \tmp,   [\irqstat, \base]
+	cmp     \tmp, #0
+	bne     1001f
+	addeq   \irqnr, \irqnr, #32
+	addeq   \irqstat, \irqstat, #4
+	cmp     \irqnr, #128
+	blo     1000b
+	b       2001f
+1001:	mov     \irqstat, #1
+1002:	tst     \tmp, \irqstat
+	bne     2002f
+	movs    \tmp, \tmp, lsr #1
+	addne   \irqnr, \irqnr, #1
+	bne     1002b
+2001:
+	mov  \irqnr, #0
+2002:
+	movs \irqnr, \irqnr
+#endif
 	.endm
 
 	@ irq priority table (not used)
diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
index 78db75475f69..ebadf4ac43fc 100644
--- a/arch/arm/plat-mxc/include/mach/hardware.h
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -22,6 +22,15 @@
 
 #include <asm/sizes.h>
 
+#define IMX_IO_ADDRESS(addr, module)					\
+	((void __force __iomem *)					\
+	 (((unsigned long)((addr) - (module ## _BASE_ADDR)) < module ## _SIZE) ?\
+	 (addr) - (module ## _BASE_ADDR) + (module ## _BASE_ADDR_VIRT) : 0))
+
+#ifdef CONFIG_ARCH_MX5
+#include <mach/mx51.h>
+#endif
+
 #ifdef CONFIG_ARCH_MX3
 #include <mach/mx3x.h>
 #include <mach/mx31.h>
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx1.h b/arch/arm/plat-mxc/include/mach/iomux-mx1.h
index bf23305c19cc..6b1507cf378e 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx1.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx1.h
@@ -1,166 +1,155 @@
 /*
-* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License
-* as published by the Free Software Foundation; either version 2
-* of the License, or (at your option) any later version.
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
-* MA 02110-1301, USA.
-*/
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+#ifndef __MACH_IOMUX_MX1_H__
+#define __MACH_IOMUX_MX1_H__
 
-#ifndef _MXC_IOMUX_MX1_H
-#define _MXC_IOMUX_MX1_H
+#include <mach/iomux-v1.h>
 
-#ifndef GPIO_PORTA
-#error Please include mach/iomux.h
-#endif
+#define PA0_AIN_SPI2_CLK	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0)
+#define PA0_AF_ETMTRACESYNC	(GPIO_PORTA | GPIO_AF | 0)
+#define PA1_AOUT_SPI2_RXD	(GPIO_PORTA | GPIO_AOUT | GPIO_IN | 1)
+#define PA1_PF_TIN		(GPIO_PORTA | GPIO_PF | 1)
+#define PA2_PF_PWM0		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 2)
+#define PA3_PF_CSI_MCLK		(GPIO_PORTA | GPIO_PF | 3)
+#define PA4_PF_CSI_D0		(GPIO_PORTA | GPIO_PF | 4)
+#define PA5_PF_CSI_D1		(GPIO_PORTA | GPIO_PF | 5)
+#define PA6_PF_CSI_D2		(GPIO_PORTA | GPIO_PF | 6)
+#define PA7_PF_CSI_D3		(GPIO_PORTA | GPIO_PF | 7)
+#define PA8_PF_CSI_D4		(GPIO_PORTA | GPIO_PF | 8)
+#define PA9_PF_CSI_D5		(GPIO_PORTA | GPIO_PF | 9)
+#define PA10_PF_CSI_D6		(GPIO_PORTA | GPIO_PF | 10)
+#define PA11_PF_CSI_D7		(GPIO_PORTA | GPIO_PF | 11)
+#define PA12_PF_CSI_VSYNC	(GPIO_PORTA | GPIO_PF | 12)
+#define PA13_PF_CSI_HSYNC	(GPIO_PORTA | GPIO_PF | 13)
+#define PA14_PF_CSI_PIXCLK	(GPIO_PORTA | GPIO_PF | 14)
+#define PA15_PF_I2C_SDA		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 15)
+#define PA16_PF_I2C_SCL		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 16)
+#define PA17_AF_ETMTRACEPKT4	(GPIO_PORTA | GPIO_AF | 17)
+#define PA17_AIN_SPI2_SS	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17)
+#define PA18_AF_ETMTRACEPKT5	(GPIO_PORTA | GPIO_AF | 18)
+#define PA19_AF_ETMTRACEPKT6	(GPIO_PORTA | GPIO_AF | 19)
+#define PA20_AF_ETMTRACEPKT7	(GPIO_PORTA | GPIO_AF | 20)
+#define PA21_PF_A0		(GPIO_PORTA | GPIO_PF | 21)
+#define PA22_PF_CS4		(GPIO_PORTA | GPIO_PF | 22)
+#define PA23_PF_CS5		(GPIO_PORTA | GPIO_PF | 23)
+#define PA24_PF_A16		(GPIO_PORTA | GPIO_PF | 24)
+#define PA24_AF_ETMTRACEPKT0	(GPIO_PORTA | GPIO_AF | 24)
+#define PA25_PF_A17		(GPIO_PORTA | GPIO_PF | 25)
+#define PA25_AF_ETMTRACEPKT1	(GPIO_PORTA | GPIO_AF | 25)
+#define PA26_PF_A18		(GPIO_PORTA | GPIO_PF | 26)
+#define PA26_AF_ETMTRACEPKT2	(GPIO_PORTA | GPIO_AF | 26)
+#define PA27_PF_A19		(GPIO_PORTA | GPIO_PF | 27)
+#define PA27_AF_ETMTRACEPKT3	(GPIO_PORTA | GPIO_AF | 27)
+#define PA28_PF_A20		(GPIO_PORTA | GPIO_PF | 28)
+#define PA28_AF_ETMPIPESTAT0	(GPIO_PORTA | GPIO_AF | 28)
+#define PA29_PF_A21		(GPIO_PORTA | GPIO_PF | 29)
+#define PA29_AF_ETMPIPESTAT1	(GPIO_PORTA | GPIO_AF | 29)
+#define PA30_PF_A22		(GPIO_PORTA | GPIO_PF | 30)
+#define PA30_AF_ETMPIPESTAT2	(GPIO_PORTA | GPIO_AF | 30)
+#define PA31_PF_A23		(GPIO_PORTA | GPIO_PF | 31)
+#define PA31_AF_ETMTRACECLK	(GPIO_PORTA | GPIO_AF | 31)
+#define PB8_PF_SD_DAT0		(GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8)
+#define PB8_AF_MS_PIO		(GPIO_PORTB | GPIO_AF | 8)
+#define PB9_PF_SD_DAT1		(GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9)
+#define PB9_AF_MS_PI1		(GPIO_PORTB | GPIO_AF | 9)
+#define PB10_PF_SD_DAT2		(GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10)
+#define PB10_AF_MS_SCLKI	(GPIO_PORTB | GPIO_AF | 10)
+#define PB11_PF_SD_DAT3		(GPIO_PORTB | GPIO_PF | 11)
+#define PB11_AF_MS_SDIO		(GPIO_PORTB | GPIO_AF | 11)
+#define PB12_PF_SD_CLK		(GPIO_PORTB | GPIO_PF | 12)
+#define PB12_AF_MS_SCLK0	(GPIO_PORTB | GPIO_AF | 12)
+#define PB13_PF_SD_CMD		(GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13)
+#define PB13_AF_MS_BS		(GPIO_PORTB | GPIO_AF | 13)
+#define PB14_AF_SSI_RXFS	(GPIO_PORTB | GPIO_AF | 14)
+#define PB15_AF_SSI_RXCLK	(GPIO_PORTB | GPIO_AF | 15)
+#define PB16_AF_SSI_RXDAT	(GPIO_PORTB | GPIO_AF | GPIO_IN | 16)
+#define PB17_AF_SSI_TXDAT	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 17)
+#define PB18_AF_SSI_TXFS	(GPIO_PORTB | GPIO_AF | 18)
+#define PB19_AF_SSI_TXCLK	(GPIO_PORTB | GPIO_AF | 19)
+#define PB20_PF_USBD_AFE	(GPIO_PORTB | GPIO_PF | 20)
+#define PB21_PF_USBD_OE		(GPIO_PORTB | GPIO_PF | 21)
+#define PB22_PF_USBD_RCV	(GPIO_PORTB | GPIO_PF | 22)
+#define PB23_PF_USBD_SUSPND	(GPIO_PORTB | GPIO_PF | 23)
+#define PB24_PF_USBD_VP		(GPIO_PORTB | GPIO_PF | 24)
+#define PB25_PF_USBD_VM		(GPIO_PORTB | GPIO_PF | 25)
+#define PB26_PF_USBD_VPO	(GPIO_PORTB | GPIO_PF | 26)
+#define PB27_PF_USBD_VMO	(GPIO_PORTB | GPIO_PF | 27)
+#define PB28_PF_UART2_CTS	(GPIO_PORTB | GPIO_PF | GPIO_OUT | 28)
+#define PB29_PF_UART2_RTS	(GPIO_PORTB | GPIO_PF | GPIO_IN | 29)
+#define PB30_PF_UART2_TXD	(GPIO_PORTB | GPIO_PF | GPIO_OUT | 30)
+#define PB31_PF_UART2_RXD	(GPIO_PORTB | GPIO_PF | GPIO_IN | 31)
+#define PC3_PF_SSI_RXFS		(GPIO_PORTC | GPIO_PF | 3)
+#define PC4_PF_SSI_RXCLK	(GPIO_PORTC | GPIO_PF | 4)
+#define PC5_PF_SSI_RXDAT	(GPIO_PORTC | GPIO_PF | GPIO_IN | 5)
+#define PC6_PF_SSI_TXDAT	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 6)
+#define PC7_PF_SSI_TXFS		(GPIO_PORTC | GPIO_PF | 7)
+#define PC8_PF_SSI_TXCLK	(GPIO_PORTC | GPIO_PF | 8)
+#define PC9_PF_UART1_CTS	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 9)
+#define PC10_PF_UART1_RTS	(GPIO_PORTC | GPIO_PF | GPIO_IN | 10)
+#define PC11_PF_UART1_TXD	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 11)
+#define PC12_PF_UART1_RXD	(GPIO_PORTC | GPIO_PF | GPIO_IN | 12)
+#define PC13_PF_SPI1_SPI_RDY	(GPIO_PORTC | GPIO_PF | 13)
+#define PC14_PF_SPI1_SCLK	(GPIO_PORTC | GPIO_PF | 14)
+#define PC15_PF_SPI1_SS		(GPIO_PORTC | GPIO_PF | 15)
+#define PC16_PF_SPI1_MISO	(GPIO_PORTC | GPIO_PF | 16)
+#define PC17_PF_SPI1_MOSI	(GPIO_PORTC | GPIO_PF | 17)
+#define PC24_BIN_UART3_RI	(GPIO_PORTC | GPIO_BIN | GPIO_OUT | 24)
+#define PC25_BIN_UART3_DSR	(GPIO_PORTC | GPIO_BIN | GPIO_OUT | 25)
+#define PC26_AOUT_UART3_DTR	(GPIO_PORTC | GPIO_AOUT | GPIO_IN | 26)
+#define PC27_BIN_UART3_DCD	(GPIO_PORTC | GPIO_BIN | GPIO_OUT | 27)
+#define PC28_BIN_UART3_CTS	(GPIO_PORTC | GPIO_BIN | GPIO_OUT | 28)
+#define PC29_AOUT_UART3_RTS	(GPIO_PORTC | GPIO_AOUT | GPIO_IN | 29)
+#define PC30_BIN_UART3_TX	(GPIO_PORTC | GPIO_BIN | 30)
+#define PC31_AOUT_UART3_RX	(GPIO_PORTC | GPIO_AOUT | GPIO_IN | 31)
+#define PD6_PF_LSCLK		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 6)
+#define PD7_PF_REV		(GPIO_PORTD | GPIO_PF | 7)
+#define PD7_AF_UART2_DTR	(GPIO_PORTD | GPIO_AF | GPIO_IN | 7)
+#define PD7_AIN_SPI2_SCLK	(GPIO_PORTD | GPIO_AIN | 7)
+#define PD8_PF_CLS		(GPIO_PORTD | GPIO_PF | 8)
+#define PD8_AF_UART2_DCD	(GPIO_PORTD | GPIO_AF | GPIO_OUT | 8)
+#define PD8_AIN_SPI2_SS		(GPIO_PORTD | GPIO_AIN | 8)
+#define PD9_PF_PS		(GPIO_PORTD | GPIO_PF | 9)
+#define PD9_AF_UART2_RI		(GPIO_PORTD | GPIO_AF | GPIO_OUT | 9)
+#define PD9_AOUT_SPI2_RXD	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 9)
+#define PD10_PF_SPL_SPR		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 10)
+#define PD10_AF_UART2_DSR	(GPIO_PORTD | GPIO_AF | GPIO_OUT | 10)
+#define PD10_AIN_SPI2_TXD	(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 10)
+#define PD11_PF_CONTRAST	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 11)
+#define PD12_PF_ACD_OE		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 12)
+#define PD13_PF_LP_HSYNC	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 13)
+#define PD14_PF_FLM_VSYNC	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 14)
+#define PD15_PF_LD0		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 15)
+#define PD16_PF_LD1		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 16)
+#define PD17_PF_LD2		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 17)
+#define PD18_PF_LD3		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 18)
+#define PD19_PF_LD4		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 19)
+#define PD20_PF_LD5		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 20)
+#define PD21_PF_LD6		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 21)
+#define PD22_PF_LD7		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 22)
+#define PD23_PF_LD8		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 23)
+#define PD24_PF_LD9		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 24)
+#define PD25_PF_LD10		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 25)
+#define PD26_PF_LD11		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 26)
+#define PD27_PF_LD12		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 27)
+#define PD28_PF_LD13		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 28)
+#define PD29_PF_LD14		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 29)
+#define PD30_PF_LD15		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 30)
+#define PD31_PF_TMR2OUT		(GPIO_PORTD | GPIO_PF | 31)
+#define PD31_BIN_SPI2_TXD	(GPIO_PORTD | GPIO_BIN | 31)
 
-/* FIXME: This list is not completed. The correct directions are
-* missing on some (many) pins
-*/
-
-
-/* Primary GPIO pin functions */
-
-#define PA0_AIN_SPI2_CLK        (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0)
-#define PA0_AF_ETMTRACESYNC     (GPIO_PORTA | GPIO_AF | 0)
-#define PA1_AOUT_SPI2_RXD       (GPIO_PORTA | GPIO_AOUT | GPIO_IN | 1)
-#define PA1_PF_TIN              (GPIO_PORTA | GPIO_PF | 1)
-#define PA2_PF_PWM0             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 2)
-#define PA3_PF_CSI_MCLK         (GPIO_PORTA | GPIO_PF | 3)
-#define PA4_PF_CSI_D0           (GPIO_PORTA | GPIO_PF | 4)
-#define PA5_PF_CSI_D1           (GPIO_PORTA | GPIO_PF | 5)
-#define PA6_PF_CSI_D2           (GPIO_PORTA | GPIO_PF | 6)
-#define PA7_PF_CSI_D3           (GPIO_PORTA | GPIO_PF | 7)
-#define PA8_PF_CSI_D4           (GPIO_PORTA | GPIO_PF | 8)
-#define PA9_PF_CSI_D5           (GPIO_PORTA | GPIO_PF | 9)
-#define PA10_PF_CSI_D6          (GPIO_PORTA | GPIO_PF | 10)
-#define PA11_PF_CSI_D7          (GPIO_PORTA | GPIO_PF | 11)
-#define PA12_PF_CSI_VSYNC       (GPIO_PORTA | GPIO_PF | 12)
-#define PA13_PF_CSI_HSYNC       (GPIO_PORTA | GPIO_PF | 13)
-#define PA14_PF_CSI_PIXCLK      (GPIO_PORTA | GPIO_PF | 14)
-#define PA15_PF_I2C_SDA         (GPIO_PORTA | GPIO_PF | GPIO_OUT | 15)
-#define PA16_PF_I2C_SCL         (GPIO_PORTA | GPIO_PF | GPIO_OUT | 16)
-#define PA17_AF_ETMTRACEPKT4    (GPIO_PORTA | GPIO_AF | 17)
-#define PA17_AIN_SPI2_SS        (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17)
-#define PA18_AF_ETMTRACEPKT5    (GPIO_PORTA | GPIO_AF | 18)
-#define PA19_AF_ETMTRACEPKT6    (GPIO_PORTA | GPIO_AF | 19)
-#define PA20_AF_ETMTRACEPKT7    (GPIO_PORTA | GPIO_AF | 20)
-#define PA21_PF_A0              (GPIO_PORTA | GPIO_PF | 21)
-#define PA22_PF_CS4             (GPIO_PORTA | GPIO_PF | 22)
-#define PA23_PF_CS5             (GPIO_PORTA | GPIO_PF | 23)
-#define PA24_PF_A16             (GPIO_PORTA | GPIO_PF | 24)
-#define PA24_AF_ETMTRACEPKT0    (GPIO_PORTA | GPIO_AF | 24)
-#define PA25_PF_A17             (GPIO_PORTA | GPIO_PF | 25)
-#define PA25_AF_ETMTRACEPKT1    (GPIO_PORTA | GPIO_AF | 25)
-#define PA26_PF_A18             (GPIO_PORTA | GPIO_PF | 26)
-#define PA26_AF_ETMTRACEPKT2    (GPIO_PORTA | GPIO_AF | 26)
-#define PA27_PF_A19             (GPIO_PORTA | GPIO_PF | 27)
-#define PA27_AF_ETMTRACEPKT3    (GPIO_PORTA | GPIO_AF | 27)
-#define PA28_PF_A20             (GPIO_PORTA | GPIO_PF | 28)
-#define PA28_AF_ETMPIPESTAT0    (GPIO_PORTA | GPIO_AF | 28)
-#define PA29_PF_A21             (GPIO_PORTA | GPIO_PF | 29)
-#define PA29_AF_ETMPIPESTAT1    (GPIO_PORTA | GPIO_AF | 29)
-#define PA30_PF_A22             (GPIO_PORTA | GPIO_PF | 30)
-#define PA30_AF_ETMPIPESTAT2    (GPIO_PORTA | GPIO_AF | 30)
-#define PA31_PF_A23             (GPIO_PORTA | GPIO_PF | 31)
-#define PA31_AF_ETMTRACECLK     (GPIO_PORTA | GPIO_AF | 31)
-#define PB8_PF_SD_DAT0          (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8)
-#define PB8_AF_MS_PIO           (GPIO_PORTB | GPIO_AF | 8)
-#define PB9_PF_SD_DAT1          (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9)
-#define PB9_AF_MS_PI1           (GPIO_PORTB | GPIO_AF | 9)
-#define PB10_PF_SD_DAT2         (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10)
-#define PB10_AF_MS_SCLKI        (GPIO_PORTB | GPIO_AF | 10)
-#define PB11_PF_SD_DAT3         (GPIO_PORTB | GPIO_PF | 11)
-#define PB11_AF_MS_SDIO         (GPIO_PORTB | GPIO_AF | 11)
-#define PB12_PF_SD_CLK          (GPIO_PORTB | GPIO_PF | 12)
-#define PB12_AF_MS_SCLK0        (GPIO_PORTB | GPIO_AF | 12)
-#define PB13_PF_SD_CMD          (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13)
-#define PB13_AF_MS_BS           (GPIO_PORTB | GPIO_AF | 13)
-#define PB14_AF_SSI_RXFS        (GPIO_PORTB | GPIO_AF | 14)
-#define PB15_AF_SSI_RXCLK       (GPIO_PORTB | GPIO_AF | 15)
-#define PB16_AF_SSI_RXDAT       (GPIO_PORTB | GPIO_AF | GPIO_IN | 16)
-#define PB17_AF_SSI_TXDAT       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 17)
-#define PB18_AF_SSI_TXFS        (GPIO_PORTB | GPIO_AF | 18)
-#define PB19_AF_SSI_TXCLK       (GPIO_PORTB | GPIO_AF | 19)
-#define PB20_PF_USBD_AFE        (GPIO_PORTB | GPIO_PF | 20)
-#define PB21_PF_USBD_OE         (GPIO_PORTB | GPIO_PF | 21)
-#define PB22_PF_USBD_RCV        (GPIO_PORTB | GPIO_PF | 22)
-#define PB23_PF_USBD_SUSPND     (GPIO_PORTB | GPIO_PF | 23)
-#define PB24_PF_USBD_VP         (GPIO_PORTB | GPIO_PF | 24)
-#define PB25_PF_USBD_VM         (GPIO_PORTB | GPIO_PF | 25)
-#define PB26_PF_USBD_VPO        (GPIO_PORTB | GPIO_PF | 26)
-#define PB27_PF_USBD_VMO        (GPIO_PORTB | GPIO_PF | 27)
-#define PB28_PF_UART2_CTS       (GPIO_PORTB | GPIO_PF | GPIO_OUT | 28)
-#define PB29_PF_UART2_RTS       (GPIO_PORTB | GPIO_PF | GPIO_IN | 29)
-#define PB30_PF_UART2_TXD       (GPIO_PORTB | GPIO_PF | GPIO_OUT | 30)
-#define PB31_PF_UART2_RXD       (GPIO_PORTB | GPIO_PF | GPIO_IN | 31)
-#define PC3_PF_SSI_RXFS         (GPIO_PORTC | GPIO_PF | 3)
-#define PC4_PF_SSI_RXCLK        (GPIO_PORTC | GPIO_PF | 4)
-#define PC5_PF_SSI_RXDAT        (GPIO_PORTC | GPIO_PF | GPIO_IN | 5)
-#define PC6_PF_SSI_TXDAT        (GPIO_PORTC | GPIO_PF | GPIO_OUT | 6)
-#define PC7_PF_SSI_TXFS         (GPIO_PORTC | GPIO_PF | 7)
-#define PC8_PF_SSI_TXCLK        (GPIO_PORTC | GPIO_PF | 8)
-#define PC9_PF_UART1_CTS        (GPIO_PORTC | GPIO_PF | GPIO_OUT | 9)
-#define PC10_PF_UART1_RTS       (GPIO_PORTC | GPIO_PF | GPIO_IN | 10)
-#define PC11_PF_UART1_TXD       (GPIO_PORTC | GPIO_PF | GPIO_OUT | 11)
-#define PC12_PF_UART1_RXD       (GPIO_PORTC | GPIO_PF | GPIO_IN | 12)
-#define PC13_PF_SPI1_SPI_RDY    (GPIO_PORTC | GPIO_PF | 13)
-#define PC14_PF_SPI1_SCLK       (GPIO_PORTC | GPIO_PF | 14)
-#define PC15_PF_SPI1_SS         (GPIO_PORTC | GPIO_PF | 15)
-#define PC16_PF_SPI1_MISO       (GPIO_PORTC | GPIO_PF | 16)
-#define PC17_PF_SPI1_MOSI       (GPIO_PORTC | GPIO_PF | 17)
-#define PC24_BIN_UART3_RI       (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 24)
-#define PC25_BIN_UART3_DSR      (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 25)
-#define PC26_AOUT_UART3_DTR     (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 26)
-#define PC27_BIN_UART3_DCD      (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 27)
-#define PC28_BIN_UART3_CTS      (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 28)
-#define PC29_AOUT_UART3_RTS     (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 29)
-#define PC30_BIN_UART3_TX       (GPIO_PORTC | GPIO_BIN | 30)
-#define PC31_AOUT_UART3_RX      (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 31)
-#define PD6_PF_LSCLK            (GPIO_PORTD | GPIO_PF | GPIO_OUT | 6)
-#define PD7_PF_REV              (GPIO_PORTD | GPIO_PF | 7)
-#define PD7_AF_UART2_DTR        (GPIO_PORTD | GPIO_AF | GPIO_IN | 7)
-#define PD7_AIN_SPI2_SCLK       (GPIO_PORTD | GPIO_AIN | 7)
-#define PD8_PF_CLS              (GPIO_PORTD | GPIO_PF | 8)
-#define PD8_AF_UART2_DCD        (GPIO_PORTD | GPIO_AF | GPIO_OUT | 8)
-#define PD8_AIN_SPI2_SS         (GPIO_PORTD | GPIO_AIN | 8)
-#define PD9_PF_PS               (GPIO_PORTD | GPIO_PF | 9)
-#define PD9_AF_UART2_RI         (GPIO_PORTD | GPIO_AF | GPIO_OUT | 9)
-#define PD9_AOUT_SPI2_RXD       (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 9)
-#define PD10_PF_SPL_SPR         (GPIO_PORTD | GPIO_PF | GPIO_OUT | 10)
-#define PD10_AF_UART2_DSR       (GPIO_PORTD | GPIO_AF | GPIO_OUT | 10)
-#define PD10_AIN_SPI2_TXD       (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 10)
-#define PD11_PF_CONTRAST        (GPIO_PORTD | GPIO_PF | GPIO_OUT | 11)
-#define PD12_PF_ACD_OE          (GPIO_PORTD | GPIO_PF | GPIO_OUT | 12)
-#define PD13_PF_LP_HSYNC        (GPIO_PORTD | GPIO_PF | GPIO_OUT | 13)
-#define PD14_PF_FLM_VSYNC       (GPIO_PORTD | GPIO_PF | GPIO_OUT | 14)
-#define PD15_PF_LD0             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 15)
-#define PD16_PF_LD1             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 16)
-#define PD17_PF_LD2             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 17)
-#define PD18_PF_LD3             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 18)
-#define PD19_PF_LD4             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 19)
-#define PD20_PF_LD5             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 20)
-#define PD21_PF_LD6             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 21)
-#define PD22_PF_LD7             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 22)
-#define PD23_PF_LD8             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 23)
-#define PD24_PF_LD9             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 24)
-#define PD25_PF_LD10            (GPIO_PORTD | GPIO_PF | GPIO_OUT | 25)
-#define PD26_PF_LD11            (GPIO_PORTD | GPIO_PF | GPIO_OUT | 26)
-#define PD27_PF_LD12            (GPIO_PORTD | GPIO_PF | GPIO_OUT | 27)
-#define PD28_PF_LD13            (GPIO_PORTD | GPIO_PF | GPIO_OUT | 28)
-#define PD29_PF_LD14            (GPIO_PORTD | GPIO_PF | GPIO_OUT | 29)
-#define PD30_PF_LD15            (GPIO_PORTD | GPIO_PF | GPIO_OUT | 30)
-#define PD31_PF_TMR2OUT         (GPIO_PORTD | GPIO_PF | 31)
-#define PD31_BIN_SPI2_TXD       (GPIO_PORTD | GPIO_BIN | 31)
-
-
-#endif
+#endif /* ifndef __MACH_IOMUX_MX1_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx21.h b/arch/arm/plat-mxc/include/mach/iomux-mx21.h
index 63aaa972e275..1495dfda7834 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx21.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx21.h
@@ -1,126 +1,122 @@
 /*
-* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License
-* as published by the Free Software Foundation; either version 2
-* of the License, or (at your option) any later version.
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
-* MA 02110-1301, USA.
-*/
-
-#ifndef _MXC_IOMUX_MX21_H
-#define _MXC_IOMUX_MX21_H
-
-#ifndef GPIO_PORTA
-#error Please include mach/iomux.h
-#endif
-
+ * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+#ifndef __MACH_IOMUX_MX21_H__
+#define __MACH_IOMUX_MX21_H__
+
+#include <mach/iomux-mx2x.h>
+#include <mach/iomux-v1.h>
 
 /* Primary GPIO pin functions */
 
-#define PB22_PF_USBH1_BYP       (GPIO_PORTB | GPIO_PF | 22)
-#define PB25_PF_USBH1_ON        (GPIO_PORTB | GPIO_PF | 25)
-#define PC5_PF_USBOTG_SDA       (GPIO_PORTC | GPIO_PF | 5)
-#define PC6_PF_USBOTG_SCL       (GPIO_PORTC | GPIO_PF | 6)
-#define PC7_PF_USBOTG_ON        (GPIO_PORTC | GPIO_PF | 7)
-#define PC8_PF_USBOTG_FS        (GPIO_PORTC | GPIO_PF | 8)
-#define PC9_PF_USBOTG_OE        (GPIO_PORTC | GPIO_PF | 9)
-#define PC10_PF_USBOTG_TXDM     (GPIO_PORTC | GPIO_PF | 10)
-#define PC11_PF_USBOTG_TXDP     (GPIO_PORTC | GPIO_PF | 11)
-#define PC12_PF_USBOTG_RXDM     (GPIO_PORTC | GPIO_PF | 12)
-#define PC13_PF_USBOTG_RXDP     (GPIO_PORTC | GPIO_PF | 13)
-#define PC16_PF_SAP_FS          (GPIO_PORTC | GPIO_PF | 16)
-#define PC17_PF_SAP_RXD         (GPIO_PORTC | GPIO_PF | 17)
-#define PC18_PF_SAP_TXD         (GPIO_PORTC | GPIO_PF | 18)
-#define PC19_PF_SAP_CLK         (GPIO_PORTC | GPIO_PF | 19)
-#define PE0_PF_TEST_WB2         (GPIO_PORTE | GPIO_PF | 0)
-#define PE1_PF_TEST_WB1         (GPIO_PORTE | GPIO_PF | 1)
-#define PE2_PF_TEST_WB0         (GPIO_PORTE | GPIO_PF | 2)
-#define PF1_PF_NFCE             (GPIO_PORTF | GPIO_PF | 1)
-#define PF3_PF_NFCLE            (GPIO_PORTF | GPIO_PF | 3)
-#define PF7_PF_NFIO0            (GPIO_PORTF | GPIO_PF | 7)
-#define PF8_PF_NFIO1            (GPIO_PORTF | GPIO_PF | 8)
-#define PF9_PF_NFIO2            (GPIO_PORTF | GPIO_PF | 9)
-#define PF10_PF_NFIO3           (GPIO_PORTF | GPIO_PF | 10)
-#define PF11_PF_NFIO4           (GPIO_PORTF | GPIO_PF | 11)
-#define PF12_PF_NFIO5           (GPIO_PORTF | GPIO_PF | 12)
-#define PF13_PF_NFIO6           (GPIO_PORTF | GPIO_PF | 13)
-#define PF14_PF_NFIO7           (GPIO_PORTF | GPIO_PF | 14)
-#define PF16_PF_RES             (GPIO_PORTF | GPIO_PF | 16)
+#define PB22_PF_USBH1_BYP	(GPIO_PORTB | GPIO_PF | 22)
+#define PB25_PF_USBH1_ON	(GPIO_PORTB | GPIO_PF | 25)
+#define PC5_PF_USBOTG_SDA	(GPIO_PORTC | GPIO_PF | 5)
+#define PC6_PF_USBOTG_SCL	(GPIO_PORTC | GPIO_PF | 6)
+#define PC7_PF_USBOTG_ON	(GPIO_PORTC | GPIO_PF | 7)
+#define PC8_PF_USBOTG_FS	(GPIO_PORTC | GPIO_PF | 8)
+#define PC9_PF_USBOTG_OE	(GPIO_PORTC | GPIO_PF | 9)
+#define PC10_PF_USBOTG_TXDM	(GPIO_PORTC | GPIO_PF | 10)
+#define PC11_PF_USBOTG_TXDP	(GPIO_PORTC | GPIO_PF | 11)
+#define PC12_PF_USBOTG_RXDM	(GPIO_PORTC | GPIO_PF | 12)
+#define PC13_PF_USBOTG_RXDP	(GPIO_PORTC | GPIO_PF | 13)
+#define PC16_PF_SAP_FS		(GPIO_PORTC | GPIO_PF | 16)
+#define PC17_PF_SAP_RXD		(GPIO_PORTC | GPIO_PF | 17)
+#define PC18_PF_SAP_TXD		(GPIO_PORTC | GPIO_PF | 18)
+#define PC19_PF_SAP_CLK		(GPIO_PORTC | GPIO_PF | 19)
+#define PE0_PF_TEST_WB2		(GPIO_PORTE | GPIO_PF | 0)
+#define PE1_PF_TEST_WB1		(GPIO_PORTE | GPIO_PF | 1)
+#define PE2_PF_TEST_WB0		(GPIO_PORTE | GPIO_PF | 2)
+#define PF1_PF_NFCE		(GPIO_PORTF | GPIO_PF | 1)
+#define PF3_PF_NFCLE		(GPIO_PORTF | GPIO_PF | 3)
+#define PF7_PF_NFIO0		(GPIO_PORTF | GPIO_PF | 7)
+#define PF8_PF_NFIO1		(GPIO_PORTF | GPIO_PF | 8)
+#define PF9_PF_NFIO2		(GPIO_PORTF | GPIO_PF | 9)
+#define PF10_PF_NFIO3		(GPIO_PORTF | GPIO_PF | 10)
+#define PF11_PF_NFIO4		(GPIO_PORTF | GPIO_PF | 11)
+#define PF12_PF_NFIO5		(GPIO_PORTF | GPIO_PF | 12)
+#define PF13_PF_NFIO6		(GPIO_PORTF | GPIO_PF | 13)
+#define PF14_PF_NFIO7		(GPIO_PORTF | GPIO_PF | 14)
+#define PF16_PF_RES		(GPIO_PORTF | GPIO_PF | 16)
 
 /* Alternate GPIO pin functions */
 
-#define PA5_AF_BMI_CLK_CS       (GPIO_PORTA | GPIO_AF | 5)
-#define PA6_AF_BMI_D0           (GPIO_PORTA | GPIO_AF | 6)
-#define PA7_AF_BMI_D1           (GPIO_PORTA | GPIO_AF | 7)
-#define PA8_AF_BMI_D2           (GPIO_PORTA | GPIO_AF | 8)
-#define PA9_AF_BMI_D3           (GPIO_PORTA | GPIO_AF | 9)
-#define PA10_AF_BMI_D4          (GPIO_PORTA | GPIO_AF | 10)
-#define PA11_AF_BMI_D5          (GPIO_PORTA | GPIO_AF | 11)
-#define PA12_AF_BMI_D6          (GPIO_PORTA | GPIO_AF | 12)
-#define PA13_AF_BMI_D7          (GPIO_PORTA | GPIO_AF | 13)
-#define PA14_AF_BMI_D8          (GPIO_PORTA | GPIO_AF | 14)
-#define PA15_AF_BMI_D9          (GPIO_PORTA | GPIO_AF | 15)
-#define PA16_AF_BMI_D10         (GPIO_PORTA | GPIO_AF | 16)
-#define PA17_AF_BMI_D11         (GPIO_PORTA | GPIO_AF | 17)
-#define PA18_AF_BMI_D12         (GPIO_PORTA | GPIO_AF | 18)
-#define PA19_AF_BMI_D13         (GPIO_PORTA | GPIO_AF | 19)
-#define PA20_AF_BMI_D14         (GPIO_PORTA | GPIO_AF | 20)
-#define PA21_AF_BMI_D15         (GPIO_PORTA | GPIO_AF | 21)
-#define PA22_AF_BMI_READ_REQ    (GPIO_PORTA | GPIO_AF | 22)
-#define PA23_AF_BMI_WRITE       (GPIO_PORTA | GPIO_AF | 23)
-#define PA29_AF_BMI_RX_FULL     (GPIO_PORTA | GPIO_AF | 29)
-#define PA30_AF_BMI_READ        (GPIO_PORTA | GPIO_AF | 30)
+#define PA5_AF_BMI_CLK_CS	(GPIO_PORTA | GPIO_AF | 5)
+#define PA6_AF_BMI_D0		(GPIO_PORTA | GPIO_AF | 6)
+#define PA7_AF_BMI_D1		(GPIO_PORTA | GPIO_AF | 7)
+#define PA8_AF_BMI_D2		(GPIO_PORTA | GPIO_AF | 8)
+#define PA9_AF_BMI_D3		(GPIO_PORTA | GPIO_AF | 9)
+#define PA10_AF_BMI_D4		(GPIO_PORTA | GPIO_AF | 10)
+#define PA11_AF_BMI_D5		(GPIO_PORTA | GPIO_AF | 11)
+#define PA12_AF_BMI_D6		(GPIO_PORTA | GPIO_AF | 12)
+#define PA13_AF_BMI_D7		(GPIO_PORTA | GPIO_AF | 13)
+#define PA14_AF_BMI_D8		(GPIO_PORTA | GPIO_AF | 14)
+#define PA15_AF_BMI_D9		(GPIO_PORTA | GPIO_AF | 15)
+#define PA16_AF_BMI_D10		(GPIO_PORTA | GPIO_AF | 16)
+#define PA17_AF_BMI_D11		(GPIO_PORTA | GPIO_AF | 17)
+#define PA18_AF_BMI_D12		(GPIO_PORTA | GPIO_AF | 18)
+#define PA19_AF_BMI_D13		(GPIO_PORTA | GPIO_AF | 19)
+#define PA20_AF_BMI_D14		(GPIO_PORTA | GPIO_AF | 20)
+#define PA21_AF_BMI_D15		(GPIO_PORTA | GPIO_AF | 21)
+#define PA22_AF_BMI_READ_REQ	(GPIO_PORTA | GPIO_AF | 22)
+#define PA23_AF_BMI_WRITE	(GPIO_PORTA | GPIO_AF | 23)
+#define PA29_AF_BMI_RX_FULL	(GPIO_PORTA | GPIO_AF | 29)
+#define PA30_AF_BMI_READ	(GPIO_PORTA | GPIO_AF | 30)
 
 /* AIN GPIO pin functions */
 
-#define PC14_AIN_SYS_CLK        (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14)
-#define PD21_AIN_USBH2_FS       (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 21)
-#define PD22_AIN_USBH2_OE       (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 22)
-#define PD23_AIN_USBH2_TXDM     (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 23)
-#define PD24_AIN_USBH2_TXDP     (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 24)
-#define PE8_AIN_IR_TXD          (GPIO_PORTE | GPIO_AIN | GPIO_OUT | 8)
-#define PF0_AIN_PC_RST          (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 0)
-#define PF1_AIN_PC_CE1          (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 1)
-#define PF2_AIN_PC_CE2          (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 2)
-#define PF3_AIN_PC_POE          (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 3)
-#define PF4_AIN_PC_OE           (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 4)
-#define PF5_AIN_PC_RW           (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 5)
+#define PC14_AIN_SYS_CLK	(GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14)
+#define PD21_AIN_USBH2_FS	(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 21)
+#define PD22_AIN_USBH2_OE	(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 22)
+#define PD23_AIN_USBH2_TXDM	(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 23)
+#define PD24_AIN_USBH2_TXDP	(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 24)
+#define PE8_AIN_IR_TXD		(GPIO_PORTE | GPIO_AIN | GPIO_OUT | 8)
+#define PF0_AIN_PC_RST		(GPIO_PORTF | GPIO_AIN | GPIO_OUT | 0)
+#define PF1_AIN_PC_CE1		(GPIO_PORTF | GPIO_AIN | GPIO_OUT | 1)
+#define PF2_AIN_PC_CE2		(GPIO_PORTF | GPIO_AIN | GPIO_OUT | 2)
+#define PF3_AIN_PC_POE		(GPIO_PORTF | GPIO_AIN | GPIO_OUT | 3)
+#define PF4_AIN_PC_OE		(GPIO_PORTF | GPIO_AIN | GPIO_OUT | 4)
+#define PF5_AIN_PC_RW		(GPIO_PORTF | GPIO_AIN | GPIO_OUT | 5)
 
 /* BIN GPIO pin functions */
 
-#define PC14_BIN_SYS_CLK        (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14)
-#define PD27_BIN_EXT_DMA_GRANT  (GPIO_PORTD | GPIO_BIN | GPIO_OUT | 27)
+#define PC14_BIN_SYS_CLK	(GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14)
+#define PD27_BIN_EXT_DMA_GRANT	(GPIO_PORTD | GPIO_BIN | GPIO_OUT | 27)
 
 /* CIN GPIO pin functions */
 
-#define PB26_CIN_USBH1_RXDAT    (GPIO_PORTB | GPIO_CIN | GPIO_OUT | 26)
+#define PB26_CIN_USBH1_RXDAT	(GPIO_PORTB | GPIO_CIN | GPIO_OUT | 26)
 
 /* AOUT GPIO pin functions */
 
-#define PA29_AOUT_BMI_WAIT      (GPIO_PORTA | GPIO_AOUT | GPIO_IN | 29)
-#define PD19_AOUT_USBH2_RXDM    (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 19)
-#define PD20_AOUT_USBH2_RXDP    (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 20)
-#define PD25_AOUT_EXT_DMAREQ    (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 25)
-#define PD26_AOUT_USBOTG_RXDAT  (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 26)
-#define PE9_AOUT_IR_RXD         (GPIO_PORTE | GPIO_AOUT | GPIO_IN | 9)
-#define PF6_AOUT_PC_BVD2        (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 6)
-#define PF7_AOUT_PC_BVD1        (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 7)
-#define PF8_AOUT_PC_VS2         (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 8)
-#define PF9_AOUT_PC_VS1         (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 9)
-#define PF10_AOUT_PC_WP         (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 10)
-#define PF11_AOUT_PC_READY      (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 11)
-#define PF12_AOUT_PC_WAIT       (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 12)
-#define PF13_AOUT_PC_CD2        (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 13)
-#define PF14_AOUT_PC_CD1        (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 14)
-
-
-#endif
+#define PA29_AOUT_BMI_WAIT	(GPIO_PORTA | GPIO_AOUT | GPIO_IN | 29)
+#define PD19_AOUT_USBH2_RXDM	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 19)
+#define PD20_AOUT_USBH2_RXDP	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 20)
+#define PD25_AOUT_EXT_DMAREQ	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 25)
+#define PD26_AOUT_USBOTG_RXDAT	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 26)
+#define PE9_AOUT_IR_RXD		(GPIO_PORTE | GPIO_AOUT | GPIO_IN | 9)
+#define PF6_AOUT_PC_BVD2	(GPIO_PORTF | GPIO_AOUT | GPIO_IN | 6)
+#define PF7_AOUT_PC_BVD1	(GPIO_PORTF | GPIO_AOUT | GPIO_IN | 7)
+#define PF8_AOUT_PC_VS2		(GPIO_PORTF | GPIO_AOUT | GPIO_IN | 8)
+#define PF9_AOUT_PC_VS1		(GPIO_PORTF | GPIO_AOUT | GPIO_IN | 9)
+#define PF10_AOUT_PC_WP		(GPIO_PORTF | GPIO_AOUT | GPIO_IN | 10)
+#define PF11_AOUT_PC_READY	(GPIO_PORTF | GPIO_AOUT | GPIO_IN | 11)
+#define PF12_AOUT_PC_WAIT	(GPIO_PORTF | GPIO_AOUT | GPIO_IN | 12)
+#define PF13_AOUT_PC_CD2	(GPIO_PORTF | GPIO_AOUT | GPIO_IN | 13)
+#define PF14_AOUT_PC_CD1	(GPIO_PORTF | GPIO_AOUT | GPIO_IN | 14)
+
+#endif /* ifndef __MACH_IOMUX_MX21_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx25.h b/arch/arm/plat-mxc/include/mach/iomux-mx25.h
index 9af494f0ab3d..f39220d1b67a 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx25.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx25.h
@@ -7,7 +7,7 @@
  *    Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
  * and
  * arch/arm/plat-mxc/include/mach/iomux-mx35.h
- *    Copyright (C, NO_PAD_CTRL) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
+ *    Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
@@ -16,24 +16,11 @@
  * http://www.opensource.org/licenses/gpl-license.html
  * http://www.gnu.org/copyleft/gpl.html
  */
-#ifndef __IOMUX_MX25_H__
-#define __IOMUX_MX25_H__
+#ifndef __MACH_IOMUX_MX25_H__
+#define __MACH_IOMUX_MX25_H__
 
 #include <mach/iomux-v3.h>
 
-#ifndef GPIO_PORTA
-#error Please include mach/iomux.h
-#endif
-
-/*
- *
- * @brief MX25 I/O Pin List
- *
- * @ingroup GPIO_MX25
- */
-
-#ifndef __ASSEMBLY__
-
 /*
  * IOMUX/PAD Bit field definitions
  */
@@ -462,9 +449,11 @@
 #define MX25_PAD_GPIO_C__CAN2_TX	IOMUX_PAD(0x3f8, 0x1fc, 0x16, 0, 0, PAD_CTL_PUS_22K_UP)
 
 #define MX25_PAD_GPIO_D__GPIO_D		IOMUX_PAD(0x3fc, 0x200, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_E__LD16		IOMUX_PAD(0x400, 0x204, 0x02, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_GPIO_D__CAN2_RX	IOMUX_PAD(0x3fc, 0x200, 0x16, 0x484, 1, PAD_CTL_PUS_22K_UP)
 
 #define MX25_PAD_GPIO_E__GPIO_E		IOMUX_PAD(0x400, 0x204, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_F__LD17		IOMUX_PAD(0x404, 0x208, 0x02, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_GPIO_E__AUD7_TXD	IOMUX_PAD(0x400, 0x204, 0x14, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_GPIO_F__GPIO_F		IOMUX_PAD(0x404, 0x208, 0x10, 0, 0, NO_PAD_CTRL)
@@ -513,5 +502,4 @@
 #define MX25_PAD_CTL_GRP_DVS_SDHC1	IOMUX_PAD(0x458, 0x000, 0, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_CTL_GRP_DVS_LCD	IOMUX_PAD(0x45c, 0x000, 0, 0, 0, NO_PAD_CTRL)
 
-#endif // __ASSEMBLY__
-#endif // __IOMUX_MX25_H__
+#endif /* __MACH_IOMUX_MX25_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx27.h b/arch/arm/plat-mxc/include/mach/iomux-mx27.h
index 5ac158b70f61..d9f9a6e32d80 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx27.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx27.h
@@ -1,207 +1,205 @@
 /*
-* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
-* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License
-* as published by the Free Software Foundation; either version 2
-* of the License, or (at your option) any later version.
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
-* MA 02110-1301, USA.
-*/
-
-#ifndef _MXC_IOMUX_MX27_H
-#define _MXC_IOMUX_MX27_H
-
-#ifndef GPIO_PORTA
-#error Please include mach/iomux.h
-#endif
-
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+#ifndef __MACH_IOMUX_MX27_H__
+#define __MACH_IOMUX_MX27_H__
+
+#include <mach/iomux-mx2x.h>
+#include <mach/iomux-v1.h>
 
 /* Primary GPIO pin functions */
 
-#define PA0_PF_USBH2_CLK        (GPIO_PORTA | GPIO_PF | 0)
-#define PA1_PF_USBH2_DIR        (GPIO_PORTA | GPIO_PF | 1)
-#define PA2_PF_USBH2_DATA7      (GPIO_PORTA | GPIO_PF | 2)
-#define PA3_PF_USBH2_NXT        (GPIO_PORTA | GPIO_PF | 3)
-#define PA4_PF_USBH2_STP        (GPIO_PORTA | GPIO_PF | 4)
-#define PB22_PF_USBH1_SUSP      (GPIO_PORTB | GPIO_PF | 22)
-#define PB25_PF_USBH1_RCV       (GPIO_PORTB | GPIO_PF | 25)
-#define PC5_PF_I2C2_SDA         (GPIO_PORTC | GPIO_PF | GPIO_IN | 5)
-#define PC6_PF_I2C2_SCL         (GPIO_PORTC | GPIO_PF | GPIO_IN | 6)
-#define PC7_PF_USBOTG_DATA5     (GPIO_PORTC | GPIO_PF | GPIO_OUT | 7)
-#define PC8_PF_USBOTG_DATA6     (GPIO_PORTC | GPIO_PF | GPIO_OUT | 8)
-#define PC9_PF_USBOTG_DATA0     (GPIO_PORTC | GPIO_PF | GPIO_OUT | 9)
-#define PC10_PF_USBOTG_DATA2    (GPIO_PORTC | GPIO_PF | GPIO_OUT | 10)
-#define PC11_PF_USBOTG_DATA1    (GPIO_PORTC | GPIO_PF | GPIO_OUT | 11)
-#define PC12_PF_USBOTG_DATA4    (GPIO_PORTC | GPIO_PF | GPIO_OUT | 12)
-#define PC13_PF_USBOTG_DATA3    (GPIO_PORTC | GPIO_PF | GPIO_OUT | 13)
-#define PC16_PF_SSI4_FS         (GPIO_PORTC | GPIO_PF | GPIO_IN | 16)
-#define PC17_PF_SSI4_RXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 17)
-#define PC18_PF_SSI4_TXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 18)
-#define PC19_PF_SSI4_CLK        (GPIO_PORTC | GPIO_PF | GPIO_IN | 19)
-#define PC25_AF_GPT5_TIN        (GPIO_PORTC | GPIO_AF | 25)
-#define PC27_AF_GPT4_TIN        (GPIO_PORTC | GPIO_AF | 27)
-#define PD0_PF_SD3_CMD          (GPIO_PORTD | GPIO_PF | 0)
-#define PD1_PF_SD3_CLK          (GPIO_PORTD | GPIO_PF | 1)
-#define PD2_PF_ATA_DATA0        (GPIO_PORTD | GPIO_PF | 2)
-#define PD3_PF_ATA_DATA1        (GPIO_PORTD | GPIO_PF | 3)
-#define PD4_PF_ATA_DATA2        (GPIO_PORTD | GPIO_PF | 4)
-#define PD5_PF_ATA_DATA3        (GPIO_PORTD | GPIO_PF | 5)
-#define PD6_PF_ATA_DATA4        (GPIO_PORTD | GPIO_PF | 6)
-#define PD7_PF_ATA_DATA5        (GPIO_PORTD | GPIO_PF | 7)
-#define PD8_PF_ATA_DATA6        (GPIO_PORTD | GPIO_PF | 8)
-#define PD9_PF_ATA_DATA7        (GPIO_PORTD | GPIO_PF | 9)
-#define PD10_PF_ATA_DATA8       (GPIO_PORTD | GPIO_PF | 10)
-#define PD11_PF_ATA_DATA9       (GPIO_PORTD | GPIO_PF | 11)
-#define PD12_PF_ATA_DATA10      (GPIO_PORTD | GPIO_PF | 12)
-#define PD13_PF_ATA_DATA11      (GPIO_PORTD | GPIO_PF | 13)
-#define PD14_PF_ATA_DATA12      (GPIO_PORTD | GPIO_PF | 14)
-#define PD15_PF_ATA_DATA13      (GPIO_PORTD | GPIO_PF | 15)
-#define PD16_PF_ATA_DATA14      (GPIO_PORTD | GPIO_PF | 16)
-#define PE0_PF_USBOTG_NXT       (GPIO_PORTE | GPIO_PF | GPIO_OUT | 0)
-#define PE1_PF_USBOTG_STP       (GPIO_PORTE | GPIO_PF | GPIO_OUT | 1)
-#define PE2_PF_USBOTG_DIR       (GPIO_PORTE | GPIO_PF | GPIO_OUT | 2)
-#define PE24_PF_USBOTG_CLK      (GPIO_PORTE | GPIO_PF | GPIO_OUT | 24)
-#define PE25_PF_USBOTG_DATA7    (GPIO_PORTE | GPIO_PF | GPIO_OUT | 25)
-#define PF1_PF_NFCLE            (GPIO_PORTF | GPIO_PF | 1)
-#define PF3_PF_NFCE             (GPIO_PORTF | GPIO_PF | 3)
-#define PF7_PF_PC_POE           (GPIO_PORTF | GPIO_PF | 7)
-#define PF8_PF_PC_RW            (GPIO_PORTF | GPIO_PF | 8)
-#define PF9_PF_PC_IOIS16        (GPIO_PORTF | GPIO_PF | 9)
-#define PF10_PF_PC_RST          (GPIO_PORTF | GPIO_PF | 10)
-#define PF11_PF_PC_BVD2         (GPIO_PORTF | GPIO_PF | 11)
-#define PF12_PF_PC_BVD1         (GPIO_PORTF | GPIO_PF | 12)
-#define PF13_PF_PC_VS2          (GPIO_PORTF | GPIO_PF | 13)
-#define PF14_PF_PC_VS1          (GPIO_PORTF | GPIO_PF | 14)
-#define PF16_PF_PC_PWRON        (GPIO_PORTF | GPIO_PF | 16)
-#define PF17_PF_PC_READY        (GPIO_PORTF | GPIO_PF | 17)
-#define PF18_PF_PC_WAIT         (GPIO_PORTF | GPIO_PF | 18)
-#define PF19_PF_PC_CD2          (GPIO_PORTF | GPIO_PF | 19)
-#define PF20_PF_PC_CD1          (GPIO_PORTF | GPIO_PF | 20)
-#define PF23_PF_ATA_DATA15      (GPIO_PORTF | GPIO_PF | 23)
+#define PA0_PF_USBH2_CLK	(GPIO_PORTA | GPIO_PF | 0)
+#define PA1_PF_USBH2_DIR	(GPIO_PORTA | GPIO_PF | 1)
+#define PA2_PF_USBH2_DATA7	(GPIO_PORTA | GPIO_PF | 2)
+#define PA3_PF_USBH2_NXT	(GPIO_PORTA | GPIO_PF | 3)
+#define PA4_PF_USBH2_STP	(GPIO_PORTA | GPIO_PF | 4)
+#define PB22_PF_USBH1_SUSP	(GPIO_PORTB | GPIO_PF | 22)
+#define PB25_PF_USBH1_RCV	(GPIO_PORTB | GPIO_PF | 25)
+#define PC5_PF_I2C2_SDA		(GPIO_PORTC | GPIO_PF | GPIO_IN | 5)
+#define PC6_PF_I2C2_SCL		(GPIO_PORTC | GPIO_PF | GPIO_IN | 6)
+#define PC7_PF_USBOTG_DATA5	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 7)
+#define PC8_PF_USBOTG_DATA6	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 8)
+#define PC9_PF_USBOTG_DATA0	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 9)
+#define PC10_PF_USBOTG_DATA2	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 10)
+#define PC11_PF_USBOTG_DATA1	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 11)
+#define PC12_PF_USBOTG_DATA4	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 12)
+#define PC13_PF_USBOTG_DATA3	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 13)
+#define PC16_PF_SSI4_FS		(GPIO_PORTC | GPIO_PF | GPIO_IN | 16)
+#define PC17_PF_SSI4_RXD	(GPIO_PORTC | GPIO_PF | GPIO_IN | 17)
+#define PC18_PF_SSI4_TXD	(GPIO_PORTC | GPIO_PF | GPIO_IN | 18)
+#define PC19_PF_SSI4_CLK	(GPIO_PORTC | GPIO_PF | GPIO_IN | 19)
+#define PD0_PF_SD3_CMD		(GPIO_PORTD | GPIO_PF | 0)
+#define PD1_PF_SD3_CLK		(GPIO_PORTD | GPIO_PF | 1)
+#define PD2_PF_ATA_DATA0	(GPIO_PORTD | GPIO_PF | 2)
+#define PD3_PF_ATA_DATA1	(GPIO_PORTD | GPIO_PF | 3)
+#define PD4_PF_ATA_DATA2	(GPIO_PORTD | GPIO_PF | 4)
+#define PD5_PF_ATA_DATA3	(GPIO_PORTD | GPIO_PF | 5)
+#define PD6_PF_ATA_DATA4	(GPIO_PORTD | GPIO_PF | 6)
+#define PD7_PF_ATA_DATA5	(GPIO_PORTD | GPIO_PF | 7)
+#define PD8_PF_ATA_DATA6	(GPIO_PORTD | GPIO_PF | 8)
+#define PD9_PF_ATA_DATA7	(GPIO_PORTD | GPIO_PF | 9)
+#define PD10_PF_ATA_DATA8	(GPIO_PORTD | GPIO_PF | 10)
+#define PD11_PF_ATA_DATA9	(GPIO_PORTD | GPIO_PF | 11)
+#define PD12_PF_ATA_DATA10	(GPIO_PORTD | GPIO_PF | 12)
+#define PD13_PF_ATA_DATA11	(GPIO_PORTD | GPIO_PF | 13)
+#define PD14_PF_ATA_DATA12	(GPIO_PORTD | GPIO_PF | 14)
+#define PD15_PF_ATA_DATA13	(GPIO_PORTD | GPIO_PF | 15)
+#define PD16_PF_ATA_DATA14	(GPIO_PORTD | GPIO_PF | 16)
+#define PE0_PF_USBOTG_NXT	(GPIO_PORTE | GPIO_PF | GPIO_OUT | 0)
+#define PE1_PF_USBOTG_STP	(GPIO_PORTE | GPIO_PF | GPIO_OUT | 1)
+#define PE2_PF_USBOTG_DIR	(GPIO_PORTE | GPIO_PF | GPIO_OUT | 2)
+#define PE24_PF_USBOTG_CLK	(GPIO_PORTE | GPIO_PF | GPIO_OUT | 24)
+#define PE25_PF_USBOTG_DATA7	(GPIO_PORTE | GPIO_PF | GPIO_OUT | 25)
+#define PF1_PF_NFCLE		(GPIO_PORTF | GPIO_PF | 1)
+#define PF3_PF_NFCE		(GPIO_PORTF | GPIO_PF | 3)
+#define PF7_PF_PC_POE		(GPIO_PORTF | GPIO_PF | 7)
+#define PF8_PF_PC_RW		(GPIO_PORTF | GPIO_PF | 8)
+#define PF9_PF_PC_IOIS16	(GPIO_PORTF | GPIO_PF | 9)
+#define PF10_PF_PC_RST		(GPIO_PORTF | GPIO_PF | 10)
+#define PF11_PF_PC_BVD2		(GPIO_PORTF | GPIO_PF | 11)
+#define PF12_PF_PC_BVD1		(GPIO_PORTF | GPIO_PF | 12)
+#define PF13_PF_PC_VS2		(GPIO_PORTF | GPIO_PF | 13)
+#define PF14_PF_PC_VS1		(GPIO_PORTF | GPIO_PF | 14)
+#define PF16_PF_PC_PWRON	(GPIO_PORTF | GPIO_PF | 16)
+#define PF17_PF_PC_READY	(GPIO_PORTF | GPIO_PF | 17)
+#define PF18_PF_PC_WAIT		(GPIO_PORTF | GPIO_PF | 18)
+#define PF19_PF_PC_CD2		(GPIO_PORTF | GPIO_PF | 19)
+#define PF20_PF_PC_CD1		(GPIO_PORTF | GPIO_PF | 20)
+#define PF23_PF_ATA_DATA15	(GPIO_PORTF | GPIO_PF | 23)
 
 /* Alternate GPIO pin functions */
 
-#define PB4_AF_MSHC_DATA0       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 4)
-#define PB5_AF_MSHC_DATA1       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 5)
-#define PB6_AF_MSHC_DATA2       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 6)
-#define PB7_AF_MSHC_DATA4       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 7)
-#define PB8_AF_MSHC_BS          (GPIO_PORTB | GPIO_AF | GPIO_OUT | 8)
-#define PB9_AF_MSHC_SCLK        (GPIO_PORTB | GPIO_AF | GPIO_OUT | 9)
-#define PB10_AF_UART6_TXD       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 10)
-#define PB11_AF_UART6_RXD       (GPIO_PORTB | GPIO_AF | GPIO_IN | 11)
-#define PB12_AF_UART6_CTS       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 12)
-#define PB13_AF_UART6_RTS       (GPIO_PORTB | GPIO_AF | GPIO_IN | 13)
-#define PB18_AF_UART5_TXD       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 18)
-#define PB19_AF_UART5_RXD       (GPIO_PORTB | GPIO_AF | GPIO_IN | 19)
-#define PB20_AF_UART5_CTS       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 20)
-#define PB21_AF_UART5_RTS       (GPIO_PORTB | GPIO_AF | GPIO_IN | 21)
-#define PC8_AF_FEC_MDIO         (GPIO_PORTC | GPIO_AF | GPIO_IN | 8)
-#define PC24_AF_GPT5_TOUT       (GPIO_PORTC | GPIO_AF | 24)
-#define PC26_AF_GPT4_TOUT       (GPIO_PORTC | GPIO_AF | 26)
-#define PD1_AF_ETMTRACE_PKT15   (GPIO_PORTD | GPIO_AF | 1)
-#define PD6_AF_ETMTRACE_PKT14   (GPIO_PORTD | GPIO_AF | 6)
-#define PD7_AF_ETMTRACE_PKT13   (GPIO_PORTD | GPIO_AF | 7)
-#define PD9_AF_ETMTRACE_PKT12   (GPIO_PORTD | GPIO_AF | 9)
-#define PD2_AF_SD3_D0           (GPIO_PORTD | GPIO_AF | 2)
-#define PD3_AF_SD3_D1           (GPIO_PORTD | GPIO_AF | 3)
-#define PD4_AF_SD3_D2           (GPIO_PORTD | GPIO_AF | 4)
-#define PD5_AF_SD3_D3           (GPIO_PORTD | GPIO_AF | 5)
-#define PD8_AF_FEC_MDIO         (GPIO_PORTD | GPIO_AF | GPIO_IN | 8)
-#define PD10_AF_ETMTRACE_PKT11  (GPIO_PORTD | GPIO_AF | 10)
-#define PD11_AF_ETMTRACE_PKT10  (GPIO_PORTD | GPIO_AF | 11)
-#define PD12_AF_ETMTRACE_PKT9   (GPIO_PORTD | GPIO_AF | 12)
-#define PD13_AF_ETMTRACE_PKT8   (GPIO_PORTD | GPIO_AF | 13)
-#define PD14_AF_ETMTRACE_PKT7   (GPIO_PORTD | GPIO_AF | 14)
-#define PD15_AF_ETMTRACE_PKT6   (GPIO_PORTD | GPIO_AF | 15)
-#define PD16_AF_ETMTRACE_PKT5   (GPIO_PORTD | GPIO_AF | 16)
-#define PF1_AF_ETMTRACE_PKT0    (GPIO_PORTF | GPIO_AF | 1)
-#define PF3_AF_ETMTRACE_PKT2    (GPIO_PORTF | GPIO_AF | 3)
-#define PF5_AF_ETMPIPESTAT11    (GPIO_PORTF | GPIO_AF | 5)
-#define PF7_AF_ATA_BUFFER_EN    (GPIO_PORTF | GPIO_AF | 7)
-#define PF8_AF_ATA_IORDY        (GPIO_PORTF | GPIO_AF | 8)
-#define PF9_AF_ATA_INTRQ        (GPIO_PORTF | GPIO_AF | 9)
-#define PF10_AF_ATA_RESET       (GPIO_PORTF | GPIO_AF | 10)
-#define PF11_AF_ATA_DMACK       (GPIO_PORTF | GPIO_AF | 11)
-#define PF12_AF_ATA_DMAREQ      (GPIO_PORTF | GPIO_AF | 12)
-#define PF13_AF_ATA_DA0         (GPIO_PORTF | GPIO_AF | 13)
-#define PF14_AF_ATA_DA1         (GPIO_PORTF | GPIO_AF | 14)
-#define PF15_AF_ETMTRACE_SYNC   (GPIO_PORTF | GPIO_AF | 15)
-#define PF16_AF_ATA_DA2         (GPIO_PORTF | GPIO_AF | 16)
-#define PF17_AF_ATA_CS0         (GPIO_PORTF | GPIO_AF | 17)
-#define PF18_AF_ATA_CS1         (GPIO_PORTF | GPIO_AF | 18)
-#define PF19_AF_ATA_DIOW        (GPIO_PORTF | GPIO_AF | 19)
-#define PF20_AF_ATA_DIOR        (GPIO_PORTF | GPIO_AF | 20)
-#define PF22_AF_ETMTRACE_CLK    (GPIO_PORTF | GPIO_AF | 22)
-#define PF23_AF_ETMTRACE_PKT4   (GPIO_PORTF | GPIO_AF | 23)
+#define PB4_AF_MSHC_DATA0	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 4)
+#define PB5_AF_MSHC_DATA1	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 5)
+#define PB6_AF_MSHC_DATA2	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 6)
+#define PB7_AF_MSHC_DATA4	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 7)
+#define PB8_AF_MSHC_BS		(GPIO_PORTB | GPIO_AF | GPIO_OUT | 8)
+#define PB9_AF_MSHC_SCLK	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 9)
+#define PB10_AF_UART6_TXD	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 10)
+#define PB11_AF_UART6_RXD	(GPIO_PORTB | GPIO_AF | GPIO_IN | 11)
+#define PB12_AF_UART6_CTS	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 12)
+#define PB13_AF_UART6_RTS	(GPIO_PORTB | GPIO_AF | GPIO_IN | 13)
+#define PB18_AF_UART5_TXD	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 18)
+#define PB19_AF_UART5_RXD	(GPIO_PORTB | GPIO_AF | GPIO_IN | 19)
+#define PB20_AF_UART5_CTS	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 20)
+#define PB21_AF_UART5_RTS	(GPIO_PORTB | GPIO_AF | GPIO_IN | 21)
+#define PC8_AF_FEC_MDIO		(GPIO_PORTC | GPIO_AF | GPIO_IN | 8)
+#define PC24_AF_GPT5_TOUT	(GPIO_PORTC | GPIO_AF | 24)
+#define PC25_AF_GPT5_TIN	(GPIO_PORTC | GPIO_AF | 25)
+#define PC26_AF_GPT4_TOUT	(GPIO_PORTC | GPIO_AF | 26)
+#define PC27_AF_GPT4_TIN	(GPIO_PORTC | GPIO_AF | 27)
+#define PD1_AF_ETMTRACE_PKT15	(GPIO_PORTD | GPIO_AF | 1)
+#define PD6_AF_ETMTRACE_PKT14	(GPIO_PORTD | GPIO_AF | 6)
+#define PD7_AF_ETMTRACE_PKT13	(GPIO_PORTD | GPIO_AF | 7)
+#define PD9_AF_ETMTRACE_PKT12	(GPIO_PORTD | GPIO_AF | 9)
+#define PD2_AF_SD3_D0		(GPIO_PORTD | GPIO_AF | 2)
+#define PD3_AF_SD3_D1		(GPIO_PORTD | GPIO_AF | 3)
+#define PD4_AF_SD3_D2		(GPIO_PORTD | GPIO_AF | 4)
+#define PD5_AF_SD3_D3		(GPIO_PORTD | GPIO_AF | 5)
+#define PD8_AF_FEC_MDIO		(GPIO_PORTD | GPIO_AF | GPIO_IN | 8)
+#define PD10_AF_ETMTRACE_PKT11	(GPIO_PORTD | GPIO_AF | 10)
+#define PD11_AF_ETMTRACE_PKT10	(GPIO_PORTD | GPIO_AF | 11)
+#define PD12_AF_ETMTRACE_PKT9	(GPIO_PORTD | GPIO_AF | 12)
+#define PD13_AF_ETMTRACE_PKT8	(GPIO_PORTD | GPIO_AF | 13)
+#define PD14_AF_ETMTRACE_PKT7	(GPIO_PORTD | GPIO_AF | 14)
+#define PD15_AF_ETMTRACE_PKT6	(GPIO_PORTD | GPIO_AF | 15)
+#define PD16_AF_ETMTRACE_PKT5	(GPIO_PORTD | GPIO_AF | 16)
+#define PF1_AF_ETMTRACE_PKT0	(GPIO_PORTF | GPIO_AF | 1)
+#define PF3_AF_ETMTRACE_PKT2	(GPIO_PORTF | GPIO_AF | 3)
+#define PF5_AF_ETMPIPESTAT11	(GPIO_PORTF | GPIO_AF | 5)
+#define PF7_AF_ATA_BUFFER_EN	(GPIO_PORTF | GPIO_AF | 7)
+#define PF8_AF_ATA_IORDY	(GPIO_PORTF | GPIO_AF | 8)
+#define PF9_AF_ATA_INTRQ	(GPIO_PORTF | GPIO_AF | 9)
+#define PF10_AF_ATA_RESET	(GPIO_PORTF | GPIO_AF | 10)
+#define PF11_AF_ATA_DMACK	(GPIO_PORTF | GPIO_AF | 11)
+#define PF12_AF_ATA_DMAREQ	(GPIO_PORTF | GPIO_AF | 12)
+#define PF13_AF_ATA_DA0		(GPIO_PORTF | GPIO_AF | 13)
+#define PF14_AF_ATA_DA1		(GPIO_PORTF | GPIO_AF | 14)
+#define PF15_AF_ETMTRACE_SYNC	(GPIO_PORTF | GPIO_AF | 15)
+#define PF16_AF_ATA_DA2		(GPIO_PORTF | GPIO_AF | 16)
+#define PF17_AF_ATA_CS0		(GPIO_PORTF | GPIO_AF | 17)
+#define PF18_AF_ATA_CS1		(GPIO_PORTF | GPIO_AF | 18)
+#define PF19_AF_ATA_DIOW	(GPIO_PORTF | GPIO_AF | 19)
+#define PF20_AF_ATA_DIOR	(GPIO_PORTF | GPIO_AF | 20)
+#define PF22_AF_ETMTRACE_CLK	(GPIO_PORTF | GPIO_AF | 22)
+#define PF23_AF_ETMTRACE_PKT4	(GPIO_PORTF | GPIO_AF | 23)
 
 /* AIN GPIO pin functions */
 
-#define PC14_AIN_SSI1_MCLK      (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14)
-#define PC15_AIN_GPT6_TOUT      (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 15)
-#define PD0_AIN_FEC_TXD0        (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 0)
-#define PD1_AIN_FEC_TXD1        (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 1)
-#define PD2_AIN_FEC_TXD2        (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 2)
-#define PD3_AIN_FEC_TXD3        (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 3)
-#define PD9_AIN_FEC_MDC         (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 9)
-#define PD16_AIN_FEC_TX_ER      (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 16)
-#define PD27_AIN_EXT_DMA_GRANT  (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 27)
-#define PF23_AIN_FEC_TX_EN      (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 23)
+#define PC14_AIN_SSI1_MCLK	(GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14)
+#define PC15_AIN_GPT6_TOUT	(GPIO_PORTC | GPIO_AIN | GPIO_OUT | 15)
+#define PD0_AIN_FEC_TXD0	(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 0)
+#define PD1_AIN_FEC_TXD1	(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 1)
+#define PD2_AIN_FEC_TXD2	(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 2)
+#define PD3_AIN_FEC_TXD3	(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 3)
+#define PD9_AIN_FEC_MDC		(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 9)
+#define PD16_AIN_FEC_TX_ER	(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 16)
+#define PD27_AIN_EXT_DMA_GRANT	(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 27)
+#define PF23_AIN_FEC_TX_EN	(GPIO_PORTF | GPIO_AIN | GPIO_OUT | 23)
 
 /* BIN GPIO pin functions */
 
-#define PC14_BIN_SSI2_MCLK      (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14)
+#define PC14_BIN_SSI2_MCLK	(GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14)
 
 /* CIN GPIO pin functions */
 
-#define PD2_CIN_SLCDC1_DAT0     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 2)
-#define PD3_CIN_SLCDC1_DAT1     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 3)
-#define PD4_CIN_SLCDC1_DAT2     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 4)
-#define PD5_CIN_SLCDC1_DAT3     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 5)
-#define PD6_CIN_SLCDC1_DAT4     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 6)
-#define PD7_CIN_SLCDC1_DAT5     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 7)
-#define PD8_CIN_SLCDC1_DAT6     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 8)
-#define PD9_CIN_SLCDC1_DAT7     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 9)
-#define PD10_CIN_SLCDC1_DAT8    (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 10)
-#define PD11_CIN_SLCDC1_DAT9    (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 11)
-#define PD12_CIN_SLCDC1_DAT10   (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 12)
-#define PD13_CIN_SLCDC1_DAT11   (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 13)
-#define PD14_CIN_SLCDC1_DAT12   (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 14)
-#define PD15_CIN_SLCDC1_DAT13   (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 15)
-#define PD16_CIN_SLCDC1_DAT14   (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 16)
-#define PD23_CIN_SLCDC1_DAT15   (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 23)
-#define PF27_CIN_EXT_DMA_GRANT  (GPIO_PORTF | GPIO_CIN | GPIO_OUT | 27)
+#define PD2_CIN_SLCDC1_DAT0	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 2)
+#define PD3_CIN_SLCDC1_DAT1	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 3)
+#define PD4_CIN_SLCDC1_DAT2	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 4)
+#define PD5_CIN_SLCDC1_DAT3	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 5)
+#define PD6_CIN_SLCDC1_DAT4	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 6)
+#define PD7_CIN_SLCDC1_DAT5	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 7)
+#define PD8_CIN_SLCDC1_DAT6	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 8)
+#define PD9_CIN_SLCDC1_DAT7	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 9)
+#define PD10_CIN_SLCDC1_DAT8	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 10)
+#define PD11_CIN_SLCDC1_DAT9	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 11)
+#define PD12_CIN_SLCDC1_DAT10	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 12)
+#define PD13_CIN_SLCDC1_DAT11	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 13)
+#define PD14_CIN_SLCDC1_DAT12	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 14)
+#define PD15_CIN_SLCDC1_DAT13	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 15)
+#define PD16_CIN_SLCDC1_DAT14	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 16)
+#define PD23_CIN_SLCDC1_DAT15	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 23)
+#define PF27_CIN_EXT_DMA_GRANT	(GPIO_PORTF | GPIO_CIN | GPIO_OUT | 27)
 /* LCDC_TESTx on PBxx omitted, because it's not clear what they do */
 
 /* AOUT GPIO pin functions */
 
-#define PC14_AOUT_GPT6_TIN      (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 14)
-#define PD4_AOUT_FEC_RX_ER      (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 4)
-#define PD5_AOUT_FEC_RXD1       (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 5)
-#define PD6_AOUT_FEC_RXD2       (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 6)
-#define PD7_AOUT_FEC_RXD3       (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 7)
-#define PD10_AOUT_FEC_CRS       (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 10)
-#define PD11_AOUT_FEC_TX_CLK    (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 11)
-#define PD12_AOUT_FEC_RXD0      (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 12)
-#define PD13_AOUT_FEC_RX_DV     (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 13)
-#define PD14_AOUT_FEC_RX_CLK    (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 14)
-#define PD15_AOUT_FEC_COL       (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 15)
-
-#define PC17_BOUT_PC_IOIS16     (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 17)
-#define PC18_BOUT_PC_BVD2       (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 18)
-#define PC19_BOUT_PC_BVD1       (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 19)
-#define PC28_BOUT_PC_BVD2       (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 28)
-#define PC29_BOUT_PC_VS1        (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 29)
-#define PC30_BOUT_PC_READY      (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 30)
-#define PC31_BOUT_PC_WAIT       (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 31)
-
-
-#endif /* _MXC_GPIO_MX1_MX2_H */
+#define PC14_AOUT_GPT6_TIN	(GPIO_PORTC | GPIO_AOUT | GPIO_IN | 14)
+#define PD4_AOUT_FEC_RX_ER	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 4)
+#define PD5_AOUT_FEC_RXD1	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 5)
+#define PD6_AOUT_FEC_RXD2	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 6)
+#define PD7_AOUT_FEC_RXD3	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 7)
+#define PD10_AOUT_FEC_CRS	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 10)
+#define PD11_AOUT_FEC_TX_CLK	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 11)
+#define PD12_AOUT_FEC_RXD0	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 12)
+#define PD13_AOUT_FEC_RX_DV	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 13)
+#define PD14_AOUT_FEC_RX_CLK	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 14)
+#define PD15_AOUT_FEC_COL	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 15)
+
+/* BOUT GPIO pin functions */
+
+#define PC17_BOUT_PC_IOIS16	(GPIO_PORTC | GPIO_BOUT | GPIO_IN | 17)
+#define PC18_BOUT_PC_BVD2	(GPIO_PORTC | GPIO_BOUT | GPIO_IN | 18)
+#define PC19_BOUT_PC_BVD1	(GPIO_PORTC | GPIO_BOUT | GPIO_IN | 19)
+#define PC28_BOUT_PC_BVD2	(GPIO_PORTC | GPIO_BOUT | GPIO_IN | 28)
+#define PC29_BOUT_PC_VS1	(GPIO_PORTC | GPIO_BOUT | GPIO_IN | 29)
+#define PC30_BOUT_PC_READY	(GPIO_PORTC | GPIO_BOUT | GPIO_IN | 30)
+#define PC31_BOUT_PC_WAIT	(GPIO_PORTC | GPIO_BOUT | GPIO_IN | 31)
+
+#endif /* __MACH_IOMUX_MX27_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx2x.h b/arch/arm/plat-mxc/include/mach/iomux-mx2x.h
index fb5ae638e79f..c4f116d214f2 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx2x.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx2x.h
@@ -1,237 +1,230 @@
 /*
-* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
-* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License
-* as published by the Free Software Foundation; either version 2
-* of the License, or (at your option) any later version.
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
-* MA 02110-1301, USA.
-*/
-
-#ifndef _MXC_IOMUX_MX2x_H
-#define _MXC_IOMUX_MX2x_H
-
-#ifndef GPIO_PORTA
-#error Please include mach/iomux.h
-#endif
-
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+#ifndef __MACH_IOMUX_MX2x_H__
+#define __MACH_IOMUX_MX2x_H__
 
 /* Primary GPIO pin functions */
 
-#define PA5_PF_LSCLK            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 5)
-#define PA6_PF_LD0              (GPIO_PORTA | GPIO_PF | GPIO_OUT | 6)
-#define PA7_PF_LD1              (GPIO_PORTA | GPIO_PF | GPIO_OUT | 7)
-#define PA8_PF_LD2              (GPIO_PORTA | GPIO_PF | GPIO_OUT | 8)
-#define PA9_PF_LD3              (GPIO_PORTA | GPIO_PF | GPIO_OUT | 9)
-#define PA10_PF_LD4             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 10)
-#define PA11_PF_LD5             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 11)
-#define PA12_PF_LD6             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 12)
-#define PA13_PF_LD7             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 13)
-#define PA14_PF_LD8             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 14)
-#define PA15_PF_LD9             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 15)
-#define PA16_PF_LD10            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 16)
-#define PA17_PF_LD11            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 17)
-#define PA18_PF_LD12            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 18)
-#define PA19_PF_LD13            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 19)
-#define PA20_PF_LD14            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 20)
-#define PA21_PF_LD15            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 21)
-#define PA22_PF_LD16            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 22)
-#define PA23_PF_LD17            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 23)
-#define PA24_PF_REV             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 24)
-#define PA25_PF_CLS             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 25)
-#define PA26_PF_PS              (GPIO_PORTA | GPIO_PF | GPIO_OUT | 26)
-#define PA27_PF_SPL_SPR         (GPIO_PORTA | GPIO_PF | GPIO_OUT | 27)
-#define PA28_PF_HSYNC           (GPIO_PORTA | GPIO_PF | GPIO_OUT | 28)
-#define PA29_PF_VSYNC           (GPIO_PORTA | GPIO_PF | GPIO_OUT | 29)
-#define PA30_PF_CONTRAST        (GPIO_PORTA | GPIO_PF | GPIO_OUT | 30)
-#define PA31_PF_OE_ACD          (GPIO_PORTA | GPIO_PF | GPIO_OUT | 31)
-#define PB4_PF_SD2_D0           (GPIO_PORTB | GPIO_PF | 4)
-#define PB5_PF_SD2_D1           (GPIO_PORTB | GPIO_PF | 5)
-#define PB6_PF_SD2_D2           (GPIO_PORTB | GPIO_PF | 6)
-#define PB7_PF_SD2_D3           (GPIO_PORTB | GPIO_PF | 7)
-#define PB8_PF_SD2_CMD          (GPIO_PORTB | GPIO_PF | 8)
-#define PB9_PF_SD2_CLK          (GPIO_PORTB | GPIO_PF | 9)
-#define PB10_PF_CSI_D0          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 10)
-#define PB11_PF_CSI_D1          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 11)
-#define PB12_PF_CSI_D2          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 12)
-#define PB13_PF_CSI_D3          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 13)
-#define PB14_PF_CSI_D4          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 14)
-#define PB15_PF_CSI_MCLK        (GPIO_PORTB | GPIO_PF | GPIO_OUT | 15)
-#define PB16_PF_CSI_PIXCLK      (GPIO_PORTB | GPIO_PF | GPIO_OUT | 16)
-#define PB17_PF_CSI_D5          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 17)
-#define PB18_PF_CSI_D6          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 18)
-#define PB19_PF_CSI_D7          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 19)
-#define PB20_PF_CSI_VSYNC       (GPIO_PORTB | GPIO_PF | GPIO_OUT | 20)
-#define PB21_PF_CSI_HSYNC       (GPIO_PORTB | GPIO_PF | GPIO_OUT | 21)
-#define PB23_PF_USB_PWR         (GPIO_PORTB | GPIO_PF | 23)
-#define PB24_PF_USB_OC          (GPIO_PORTB | GPIO_PF | 24)
-#define PB26_PF_USBH1_FS        (GPIO_PORTB | GPIO_PF | 26)
-#define PB27_PF_USBH1_OE        (GPIO_PORTB | GPIO_PF | 27)
-#define PB28_PF_USBH1_TXDM      (GPIO_PORTB | GPIO_PF | 28)
-#define PB29_PF_USBH1_TXDP      (GPIO_PORTB | GPIO_PF | 29)
-#define PB30_PF_USBH1_RXDM      (GPIO_PORTB | GPIO_PF | 30)
-#define PB31_PF_USBH1_RXDP      (GPIO_PORTB | GPIO_PF | 31)
-#define PC14_PF_TOUT            (GPIO_PORTC | GPIO_PF | 14)
-#define PC15_PF_TIN             (GPIO_PORTC | GPIO_PF | 15)
-#define PC20_PF_SSI1_FS         (GPIO_PORTC | GPIO_PF | GPIO_IN | 20)
-#define PC21_PF_SSI1_RXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 21)
-#define PC22_PF_SSI1_TXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 22)
-#define PC23_PF_SSI1_CLK        (GPIO_PORTC | GPIO_PF | GPIO_IN | 23)
-#define PC24_PF_SSI2_FS         (GPIO_PORTC | GPIO_PF | GPIO_IN | 24)
-#define PC25_PF_SSI2_RXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 25)
-#define PC26_PF_SSI2_TXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 26)
-#define PC27_PF_SSI2_CLK        (GPIO_PORTC | GPIO_PF | GPIO_IN | 27)
-#define PC28_PF_SSI3_FS         (GPIO_PORTC | GPIO_PF | GPIO_IN | 28)
-#define PC29_PF_SSI3_RXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 29)
-#define PC30_PF_SSI3_TXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 30)
-#define PC31_PF_SSI3_CLK        (GPIO_PORTC | GPIO_PF | GPIO_IN | 31)
-#define PD17_PF_I2C_DATA        (GPIO_PORTD | GPIO_PF | GPIO_OUT | 17)
-#define PD18_PF_I2C_CLK         (GPIO_PORTD | GPIO_PF | GPIO_OUT | 18)
-#define PD19_PF_CSPI2_SS2       (GPIO_PORTD | GPIO_PF | 19)
-#define PD20_PF_CSPI2_SS1       (GPIO_PORTD | GPIO_PF | 20)
-#define PD21_PF_CSPI2_SS0       (GPIO_PORTD | GPIO_PF | 21)
-#define PD22_PF_CSPI2_SCLK      (GPIO_PORTD | GPIO_PF | 22)
-#define PD23_PF_CSPI2_MISO      (GPIO_PORTD | GPIO_PF | 23)
-#define PD24_PF_CSPI2_MOSI      (GPIO_PORTD | GPIO_PF | 24)
-#define PD25_PF_CSPI1_RDY       (GPIO_PORTD | GPIO_PF | GPIO_OUT | 25)
-#define PD26_PF_CSPI1_SS2       (GPIO_PORTD | GPIO_PF | GPIO_OUT | 26)
-#define PD27_PF_CSPI1_SS1       (GPIO_PORTD | GPIO_PF | GPIO_OUT | 27)
-#define PD28_PF_CSPI1_SS0       (GPIO_PORTD | GPIO_PF | GPIO_OUT | 28)
-#define PD29_PF_CSPI1_SCLK      (GPIO_PORTD | GPIO_PF | GPIO_OUT | 29)
-#define PD30_PF_CSPI1_MISO      (GPIO_PORTD | GPIO_PF | GPIO_IN | 30)
-#define PD31_PF_CSPI1_MOSI      (GPIO_PORTD | GPIO_PF | GPIO_OUT | 31)
-#define PE3_PF_UART2_CTS        (GPIO_PORTE | GPIO_PF | GPIO_OUT | 3)
-#define PE4_PF_UART2_RTS        (GPIO_PORTE | GPIO_PF | GPIO_IN | 4)
-#define PE5_PF_PWMO             (GPIO_PORTE | GPIO_PF | 5)
-#define PE6_PF_UART2_TXD        (GPIO_PORTE | GPIO_PF | GPIO_OUT | 6)
-#define PE7_PF_UART2_RXD        (GPIO_PORTE | GPIO_PF | GPIO_IN | 7)
-#define PE8_PF_UART3_TXD        (GPIO_PORTE | GPIO_PF | GPIO_OUT | 8)
-#define PE9_PF_UART3_RXD        (GPIO_PORTE | GPIO_PF | GPIO_IN | 9)
-#define PE10_PF_UART3_CTS       (GPIO_PORTE | GPIO_PF | GPIO_OUT | 10)
-#define PE11_PF_UART3_RTS       (GPIO_PORTE | GPIO_PF | GPIO_IN | 11)
-#define PE12_PF_UART1_TXD       (GPIO_PORTE | GPIO_PF | GPIO_OUT | 12)
-#define PE13_PF_UART1_RXD       (GPIO_PORTE | GPIO_PF | GPIO_IN | 13)
-#define PE14_PF_UART1_CTS       (GPIO_PORTE | GPIO_PF | GPIO_OUT | 14)
-#define PE15_PF_UART1_RTS       (GPIO_PORTE | GPIO_PF | GPIO_IN | 15)
-#define PE16_PF_RTCK            (GPIO_PORTE | GPIO_PF | GPIO_OUT | 16)
-#define PE17_PF_RESET_OUT       (GPIO_PORTE | GPIO_PF | 17)
-#define PE18_PF_SD1_D0          (GPIO_PORTE | GPIO_PF | 18)
-#define PE19_PF_SD1_D1          (GPIO_PORTE | GPIO_PF | 19)
-#define PE20_PF_SD1_D2          (GPIO_PORTE | GPIO_PF | 20)
-#define PE21_PF_SD1_D3          (GPIO_PORTE | GPIO_PF | 21)
-#define PE22_PF_SD1_CMD         (GPIO_PORTE | GPIO_PF | 22)
-#define PE23_PF_SD1_CLK         (GPIO_PORTE | GPIO_PF | 23)
-#define PF0_PF_NRFB             (GPIO_PORTF | GPIO_PF | 0)
-#define PF2_PF_NFWP             (GPIO_PORTF | GPIO_PF | 2)
-#define PF4_PF_NFALE            (GPIO_PORTF | GPIO_PF | 4)
-#define PF5_PF_NFRE             (GPIO_PORTF | GPIO_PF | 5)
-#define PF6_PF_NFWE             (GPIO_PORTF | GPIO_PF | 6)
-#define PF15_PF_CLKO            (GPIO_PORTF | GPIO_PF | 15)
-#define PF21_PF_CS4             (GPIO_PORTF | GPIO_PF | 21)
-#define PF22_PF_CS5             (GPIO_PORTF | GPIO_PF | 22)
+#define PA5_PF_LSCLK		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 5)
+#define PA6_PF_LD0		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 6)
+#define PA7_PF_LD1		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 7)
+#define PA8_PF_LD2		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 8)
+#define PA9_PF_LD3		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 9)
+#define PA10_PF_LD4		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 10)
+#define PA11_PF_LD5		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 11)
+#define PA12_PF_LD6		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 12)
+#define PA13_PF_LD7		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 13)
+#define PA14_PF_LD8		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 14)
+#define PA15_PF_LD9		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 15)
+#define PA16_PF_LD10		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 16)
+#define PA17_PF_LD11		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 17)
+#define PA18_PF_LD12		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 18)
+#define PA19_PF_LD13		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 19)
+#define PA20_PF_LD14		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 20)
+#define PA21_PF_LD15		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 21)
+#define PA22_PF_LD16		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 22)
+#define PA23_PF_LD17		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 23)
+#define PA24_PF_REV		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 24)
+#define PA25_PF_CLS		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 25)
+#define PA26_PF_PS		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 26)
+#define PA27_PF_SPL_SPR		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 27)
+#define PA28_PF_HSYNC		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 28)
+#define PA29_PF_VSYNC		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 29)
+#define PA30_PF_CONTRAST	(GPIO_PORTA | GPIO_PF | GPIO_OUT | 30)
+#define PA31_PF_OE_ACD		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 31)
+#define PB4_PF_SD2_D0		(GPIO_PORTB | GPIO_PF | 4)
+#define PB5_PF_SD2_D1		(GPIO_PORTB | GPIO_PF | 5)
+#define PB6_PF_SD2_D2		(GPIO_PORTB | GPIO_PF | 6)
+#define PB7_PF_SD2_D3		(GPIO_PORTB | GPIO_PF | 7)
+#define PB8_PF_SD2_CMD		(GPIO_PORTB | GPIO_PF | 8)
+#define PB9_PF_SD2_CLK		(GPIO_PORTB | GPIO_PF | 9)
+#define PB10_PF_CSI_D0		(GPIO_PORTB | GPIO_PF | GPIO_OUT | 10)
+#define PB11_PF_CSI_D1		(GPIO_PORTB | GPIO_PF | GPIO_OUT | 11)
+#define PB12_PF_CSI_D2		(GPIO_PORTB | GPIO_PF | GPIO_OUT | 12)
+#define PB13_PF_CSI_D3		(GPIO_PORTB | GPIO_PF | GPIO_OUT | 13)
+#define PB14_PF_CSI_D4		(GPIO_PORTB | GPIO_PF | GPIO_OUT | 14)
+#define PB15_PF_CSI_MCLK	(GPIO_PORTB | GPIO_PF | GPIO_OUT | 15)
+#define PB16_PF_CSI_PIXCLK	(GPIO_PORTB | GPIO_PF | GPIO_OUT | 16)
+#define PB17_PF_CSI_D5		(GPIO_PORTB | GPIO_PF | GPIO_OUT | 17)
+#define PB18_PF_CSI_D6		(GPIO_PORTB | GPIO_PF | GPIO_OUT | 18)
+#define PB19_PF_CSI_D7		(GPIO_PORTB | GPIO_PF | GPIO_OUT | 19)
+#define PB20_PF_CSI_VSYNC	(GPIO_PORTB | GPIO_PF | GPIO_OUT | 20)
+#define PB21_PF_CSI_HSYNC	(GPIO_PORTB | GPIO_PF | GPIO_OUT | 21)
+#define PB23_PF_USB_PWR		(GPIO_PORTB | GPIO_PF | 23)
+#define PB24_PF_USB_OC		(GPIO_PORTB | GPIO_PF | 24)
+#define PB26_PF_USBH1_FS	(GPIO_PORTB | GPIO_PF | 26)
+#define PB27_PF_USBH1_OE	(GPIO_PORTB | GPIO_PF | 27)
+#define PB28_PF_USBH1_TXDM	(GPIO_PORTB | GPIO_PF | 28)
+#define PB29_PF_USBH1_TXDP	(GPIO_PORTB | GPIO_PF | 29)
+#define PB30_PF_USBH1_RXDM	(GPIO_PORTB | GPIO_PF | 30)
+#define PB31_PF_USBH1_RXDP	(GPIO_PORTB | GPIO_PF | 31)
+#define PC14_PF_TOUT		(GPIO_PORTC | GPIO_PF | 14)
+#define PC15_PF_TIN		(GPIO_PORTC | GPIO_PF | 15)
+#define PC20_PF_SSI1_FS		(GPIO_PORTC | GPIO_PF | GPIO_IN | 20)
+#define PC21_PF_SSI1_RXD	(GPIO_PORTC | GPIO_PF | GPIO_IN | 21)
+#define PC22_PF_SSI1_TXD	(GPIO_PORTC | GPIO_PF | GPIO_IN | 22)
+#define PC23_PF_SSI1_CLK	(GPIO_PORTC | GPIO_PF | GPIO_IN | 23)
+#define PC24_PF_SSI2_FS		(GPIO_PORTC | GPIO_PF | GPIO_IN | 24)
+#define PC25_PF_SSI2_RXD	(GPIO_PORTC | GPIO_PF | GPIO_IN | 25)
+#define PC26_PF_SSI2_TXD	(GPIO_PORTC | GPIO_PF | GPIO_IN | 26)
+#define PC27_PF_SSI2_CLK	(GPIO_PORTC | GPIO_PF | GPIO_IN | 27)
+#define PC28_PF_SSI3_FS		(GPIO_PORTC | GPIO_PF | GPIO_IN | 28)
+#define PC29_PF_SSI3_RXD	(GPIO_PORTC | GPIO_PF | GPIO_IN | 29)
+#define PC30_PF_SSI3_TXD	(GPIO_PORTC | GPIO_PF | GPIO_IN | 30)
+#define PC31_PF_SSI3_CLK	(GPIO_PORTC | GPIO_PF | GPIO_IN | 31)
+#define PD17_PF_I2C_DATA	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 17)
+#define PD18_PF_I2C_CLK		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 18)
+#define PD19_PF_CSPI2_SS2	(GPIO_PORTD | GPIO_PF | 19)
+#define PD20_PF_CSPI2_SS1	(GPIO_PORTD | GPIO_PF | 20)
+#define PD21_PF_CSPI2_SS0	(GPIO_PORTD | GPIO_PF | 21)
+#define PD22_PF_CSPI2_SCLK	(GPIO_PORTD | GPIO_PF | 22)
+#define PD23_PF_CSPI2_MISO	(GPIO_PORTD | GPIO_PF | 23)
+#define PD24_PF_CSPI2_MOSI	(GPIO_PORTD | GPIO_PF | 24)
+#define PD25_PF_CSPI1_RDY	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 25)
+#define PD26_PF_CSPI1_SS2	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 26)
+#define PD27_PF_CSPI1_SS1	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 27)
+#define PD28_PF_CSPI1_SS0	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 28)
+#define PD29_PF_CSPI1_SCLK	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 29)
+#define PD30_PF_CSPI1_MISO	(GPIO_PORTD | GPIO_PF | GPIO_IN | 30)
+#define PD31_PF_CSPI1_MOSI	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 31)
+#define PE3_PF_UART2_CTS	(GPIO_PORTE | GPIO_PF | GPIO_OUT | 3)
+#define PE4_PF_UART2_RTS	(GPIO_PORTE | GPIO_PF | GPIO_IN | 4)
+#define PE5_PF_PWMO		(GPIO_PORTE | GPIO_PF | 5)
+#define PE6_PF_UART2_TXD	(GPIO_PORTE | GPIO_PF | GPIO_OUT | 6)
+#define PE7_PF_UART2_RXD	(GPIO_PORTE | GPIO_PF | GPIO_IN | 7)
+#define PE8_PF_UART3_TXD	(GPIO_PORTE | GPIO_PF | GPIO_OUT | 8)
+#define PE9_PF_UART3_RXD	(GPIO_PORTE | GPIO_PF | GPIO_IN | 9)
+#define PE10_PF_UART3_CTS	(GPIO_PORTE | GPIO_PF | GPIO_OUT | 10)
+#define PE11_PF_UART3_RTS	(GPIO_PORTE | GPIO_PF | GPIO_IN | 11)
+#define PE12_PF_UART1_TXD	(GPIO_PORTE | GPIO_PF | GPIO_OUT | 12)
+#define PE13_PF_UART1_RXD	(GPIO_PORTE | GPIO_PF | GPIO_IN | 13)
+#define PE14_PF_UART1_CTS	(GPIO_PORTE | GPIO_PF | GPIO_OUT | 14)
+#define PE15_PF_UART1_RTS	(GPIO_PORTE | GPIO_PF | GPIO_IN | 15)
+#define PE16_PF_RTCK		(GPIO_PORTE | GPIO_PF | GPIO_OUT | 16)
+#define PE17_PF_RESET_OUT	(GPIO_PORTE | GPIO_PF | 17)
+#define PE18_PF_SD1_D0		(GPIO_PORTE | GPIO_PF | 18)
+#define PE19_PF_SD1_D1		(GPIO_PORTE | GPIO_PF | 19)
+#define PE20_PF_SD1_D2		(GPIO_PORTE | GPIO_PF | 20)
+#define PE21_PF_SD1_D3		(GPIO_PORTE | GPIO_PF | 21)
+#define PE22_PF_SD1_CMD		(GPIO_PORTE | GPIO_PF | 22)
+#define PE23_PF_SD1_CLK		(GPIO_PORTE | GPIO_PF | 23)
+#define PF0_PF_NRFB		(GPIO_PORTF | GPIO_PF | 0)
+#define PF2_PF_NFWP		(GPIO_PORTF | GPIO_PF | 2)
+#define PF4_PF_NFALE		(GPIO_PORTF | GPIO_PF | 4)
+#define PF5_PF_NFRE		(GPIO_PORTF | GPIO_PF | 5)
+#define PF6_PF_NFWE		(GPIO_PORTF | GPIO_PF | 6)
+#define PF15_PF_CLKO		(GPIO_PORTF | GPIO_PF | 15)
+#define PF21_PF_CS4		(GPIO_PORTF | GPIO_PF | 21)
+#define PF22_PF_CS5		(GPIO_PORTF | GPIO_PF | 22)
 
 /* Alternate GPIO pin functions */
 
-#define PB26_AF_UART4_RTS       (GPIO_PORTB | GPIO_AF | GPIO_IN | 26)
-#define PB28_AF_UART4_TXD       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 28)
-#define PB29_AF_UART4_CTS       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 29)
-#define PB31_AF_UART4_RXD       (GPIO_PORTB | GPIO_AF | GPIO_IN | 31)
-#define PC28_AF_SLCDC2_D0       (GPIO_PORTC | GPIO_AF | 28)
-#define PC29_AF_SLCDC2_RS       (GPIO_PORTC | GPIO_AF | 29)
-#define PC30_AF_SLCDC2_CS       (GPIO_PORTC | GPIO_AF | 30)
-#define PC31_AF_SLCDC2_CLK      (GPIO_PORTC | GPIO_AF | 31)
-#define PD19_AF_USBH2_DATA4     (GPIO_PORTD | GPIO_AF | 19)
-#define PD20_AF_USBH2_DATA3     (GPIO_PORTD | GPIO_AF | 20)
-#define PD21_AF_USBH2_DATA6     (GPIO_PORTD | GPIO_AF | 21)
-#define PD22_AF_USBH2_DATA0     (GPIO_PORTD | GPIO_AF | 22)
-#define PD23_AF_USBH2_DATA2     (GPIO_PORTD | GPIO_AF | 23)
-#define PD24_AF_USBH2_DATA1     (GPIO_PORTD | GPIO_AF | 24)
-#define PD26_AF_USBH2_DATA5     (GPIO_PORTD | GPIO_AF | 26)
-#define PE0_AF_KP_COL6          (GPIO_PORTE | GPIO_AF | 0)
-#define PE1_AF_KP_ROW6          (GPIO_PORTE | GPIO_AF | 1)
-#define PE2_AF_KP_ROW7          (GPIO_PORTE | GPIO_AF | 2)
-#define PE3_AF_KP_COL7          (GPIO_PORTE | GPIO_AF | 3)
-#define PE4_AF_KP_ROW7          (GPIO_PORTE | GPIO_AF | 4)
-#define PE6_AF_KP_COL6          (GPIO_PORTE | GPIO_AF | 6)
-#define PE7_AF_KP_ROW6          (GPIO_PORTE | GPIO_AF | 7)
-#define PE16_AF_OWIRE           (GPIO_PORTE | GPIO_AF | 16)
-#define PE18_AF_CSPI3_MISO      (GPIO_PORTE | GPIO_AF | GPIO_IN | 18)
-#define PE21_AF_CSPI3_SS        (GPIO_PORTE | GPIO_AF | GPIO_OUT | 21)
-#define PE22_AF_CSPI3_MOSI      (GPIO_PORTE | GPIO_AF | GPIO_OUT | 22)
-#define PE23_AF_CSPI3_SCLK      (GPIO_PORTE | GPIO_AF | GPIO_OUT | 23)
+#define PB26_AF_UART4_RTS	(GPIO_PORTB | GPIO_AF | GPIO_IN | 26)
+#define PB28_AF_UART4_TXD	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 28)
+#define PB29_AF_UART4_CTS	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 29)
+#define PB31_AF_UART4_RXD	(GPIO_PORTB | GPIO_AF | GPIO_IN | 31)
+#define PC28_AF_SLCDC2_D0	(GPIO_PORTC | GPIO_AF | 28)
+#define PC29_AF_SLCDC2_RS	(GPIO_PORTC | GPIO_AF | 29)
+#define PC30_AF_SLCDC2_CS	(GPIO_PORTC | GPIO_AF | 30)
+#define PC31_AF_SLCDC2_CLK	(GPIO_PORTC | GPIO_AF | 31)
+#define PD19_AF_USBH2_DATA4	(GPIO_PORTD | GPIO_AF | 19)
+#define PD20_AF_USBH2_DATA3	(GPIO_PORTD | GPIO_AF | 20)
+#define PD21_AF_USBH2_DATA6	(GPIO_PORTD | GPIO_AF | 21)
+#define PD22_AF_USBH2_DATA0	(GPIO_PORTD | GPIO_AF | 22)
+#define PD23_AF_USBH2_DATA2	(GPIO_PORTD | GPIO_AF | 23)
+#define PD24_AF_USBH2_DATA1	(GPIO_PORTD | GPIO_AF | 24)
+#define PD26_AF_USBH2_DATA5	(GPIO_PORTD | GPIO_AF | 26)
+#define PE0_AF_KP_COL6		(GPIO_PORTE | GPIO_AF | 0)
+#define PE1_AF_KP_ROW6		(GPIO_PORTE | GPIO_AF | 1)
+#define PE2_AF_KP_ROW7		(GPIO_PORTE | GPIO_AF | 2)
+#define PE3_AF_KP_COL7		(GPIO_PORTE | GPIO_AF | 3)
+#define PE4_AF_KP_ROW7		(GPIO_PORTE | GPIO_AF | 4)
+#define PE6_AF_KP_COL6		(GPIO_PORTE | GPIO_AF | 6)
+#define PE7_AF_KP_ROW6		(GPIO_PORTE | GPIO_AF | 7)
+#define PE16_AF_OWIRE		(GPIO_PORTE | GPIO_AF | 16)
+#define PE18_AF_CSPI3_MISO	(GPIO_PORTE | GPIO_AF | GPIO_IN | 18)
+#define PE21_AF_CSPI3_SS	(GPIO_PORTE | GPIO_AF | GPIO_OUT | 21)
+#define PE22_AF_CSPI3_MOSI	(GPIO_PORTE | GPIO_AF | GPIO_OUT | 22)
+#define PE23_AF_CSPI3_SCLK	(GPIO_PORTE | GPIO_AF | GPIO_OUT | 23)
 
 /* AIN GPIO pin functions */
 
-#define PA6_AIN_SLCDC1_DAT0     (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 6)
-#define PA7_AIN_SLCDC1_DAT1     (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 7)
-#define PA8_AIN_SLCDC1_DAT2     (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 8)
-#define PA0_AIN_SLCDC1_DAT3     (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0)
-#define PA11_AIN_SLCDC1_DAT5    (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 11)
-#define PA13_AIN_SLCDC1_DAT7    (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 13)
-#define PA15_AIN_SLCDC1_DAT9    (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 15)
-#define PA17_AIN_SLCDC1_DAT11   (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17)
-#define PA19_AIN_SLCDC1_DAT13   (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 19)
-#define PA21_AIN_SLCDC1_DAT15   (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 21)
-#define PA22_AIN_EXT_DMAGRANT   (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 22)
-#define PA24_AIN_SLCDC1_D0      (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 24)
-#define PA25_AIN_SLCDC1_RS      (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 25)
-#define PA26_AIN_SLCDC1_CS      (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 26)
-#define PA27_AIN_SLCDC1_CLK     (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 27)
-#define PB6_AIN_SLCDC1_D0       (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 6)
-#define PB7_AIN_SLCDC1_RS       (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 7)
-#define PB8_AIN_SLCDC1_CS       (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 8)
-#define PB9_AIN_SLCDC1_CLK      (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 9)
-#define PB25_AIN_SLCDC1_DAT0    (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 25)
-#define PB26_AIN_SLCDC1_DAT1    (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 26)
-#define PB27_AIN_SLCDC1_DAT2    (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 27)
-#define PB28_AIN_SLCDC1_DAT3    (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 28)
-#define PB29_AIN_SLCDC1_DAT4    (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 29)
-#define PB30_AIN_SLCDC1_DAT5    (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 30)
-#define PB31_AIN_SLCDC1_DAT6    (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 31)
-#define PC5_AIN_SLCDC1_DAT7     (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 5)
-#define PC6_AIN_SLCDC1_DAT8     (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 6)
-#define PC7_AIN_SLCDC1_DAT9     (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 7)
-#define PC8_AIN_SLCDC1_DAT10    (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 8)
-#define PC9_AIN_SLCDC1_DAT11    (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 9)
-#define PC10_AIN_SLCDC1_DAT12   (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 10)
-#define PC11_AIN_SLCDC1_DAT13   (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 11)
-#define PC12_AIN_SLCDC1_DAT14   (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 12)
-#define PC13_AIN_SLCDC1_DAT15   (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 13)
-#define PE5_AIN_PC_SPKOUT       (GPIO_PORTE | GPIO_AIN | GPIO_OUT | 5)
+#define PA6_AIN_SLCDC1_DAT0	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 6)
+#define PA7_AIN_SLCDC1_DAT1	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 7)
+#define PA8_AIN_SLCDC1_DAT2	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 8)
+#define PA0_AIN_SLCDC1_DAT3	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0)
+#define PA11_AIN_SLCDC1_DAT5	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 11)
+#define PA13_AIN_SLCDC1_DAT7	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 13)
+#define PA15_AIN_SLCDC1_DAT9	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 15)
+#define PA17_AIN_SLCDC1_DAT11	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17)
+#define PA19_AIN_SLCDC1_DAT13	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 19)
+#define PA21_AIN_SLCDC1_DAT15	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 21)
+#define PA22_AIN_EXT_DMAGRANT	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 22)
+#define PA24_AIN_SLCDC1_D0	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 24)
+#define PA25_AIN_SLCDC1_RS	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 25)
+#define PA26_AIN_SLCDC1_CS	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 26)
+#define PA27_AIN_SLCDC1_CLK	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 27)
+#define PB6_AIN_SLCDC1_D0	(GPIO_PORTB | GPIO_AIN | GPIO_OUT | 6)
+#define PB7_AIN_SLCDC1_RS	(GPIO_PORTB | GPIO_AIN | GPIO_OUT | 7)
+#define PB8_AIN_SLCDC1_CS	(GPIO_PORTB | GPIO_AIN | GPIO_OUT | 8)
+#define PB9_AIN_SLCDC1_CLK	(GPIO_PORTB | GPIO_AIN | GPIO_OUT | 9)
+#define PB25_AIN_SLCDC1_DAT0	(GPIO_PORTB | GPIO_AIN | GPIO_OUT | 25)
+#define PB26_AIN_SLCDC1_DAT1	(GPIO_PORTB | GPIO_AIN | GPIO_OUT | 26)
+#define PB27_AIN_SLCDC1_DAT2	(GPIO_PORTB | GPIO_AIN | GPIO_OUT | 27)
+#define PB28_AIN_SLCDC1_DAT3	(GPIO_PORTB | GPIO_AIN | GPIO_OUT | 28)
+#define PB29_AIN_SLCDC1_DAT4	(GPIO_PORTB | GPIO_AIN | GPIO_OUT | 29)
+#define PB30_AIN_SLCDC1_DAT5	(GPIO_PORTB | GPIO_AIN | GPIO_OUT | 30)
+#define PB31_AIN_SLCDC1_DAT6	(GPIO_PORTB | GPIO_AIN | GPIO_OUT | 31)
+#define PC5_AIN_SLCDC1_DAT7	(GPIO_PORTC | GPIO_AIN | GPIO_OUT | 5)
+#define PC6_AIN_SLCDC1_DAT8	(GPIO_PORTC | GPIO_AIN | GPIO_OUT | 6)
+#define PC7_AIN_SLCDC1_DAT9	(GPIO_PORTC | GPIO_AIN | GPIO_OUT | 7)
+#define PC8_AIN_SLCDC1_DAT10	(GPIO_PORTC | GPIO_AIN | GPIO_OUT | 8)
+#define PC9_AIN_SLCDC1_DAT11	(GPIO_PORTC | GPIO_AIN | GPIO_OUT | 9)
+#define PC10_AIN_SLCDC1_DAT12	(GPIO_PORTC | GPIO_AIN | GPIO_OUT | 10)
+#define PC11_AIN_SLCDC1_DAT13	(GPIO_PORTC | GPIO_AIN | GPIO_OUT | 11)
+#define PC12_AIN_SLCDC1_DAT14	(GPIO_PORTC | GPIO_AIN | GPIO_OUT | 12)
+#define PC13_AIN_SLCDC1_DAT15	(GPIO_PORTC | GPIO_AIN | GPIO_OUT | 13)
+#define PE5_AIN_PC_SPKOUT	(GPIO_PORTE | GPIO_AIN | GPIO_OUT | 5)
 
 /* BIN GPIO pin functions */
 
-#define PE5_BIN_TOUT2           (GPIO_PORTE | GPIO_BIN | GPIO_OUT | 5)
+#define PE5_BIN_TOUT2		(GPIO_PORTE | GPIO_BIN | GPIO_OUT | 5)
 
 /* CIN GPIO pin functions */
 
-#define PA14_CIN_SLCDC1_DAT0    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 14)
-#define PA15_CIN_SLCDC1_DAT1    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 15)
-#define PA16_CIN_SLCDC1_DAT2    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 16)
-#define PA17_CIN_SLCDC1_DAT3    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 17)
-#define PA18_CIN_SLCDC1_DAT4    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 18)
-#define PA19_CIN_SLCDC1_DAT5    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 19)
-#define PA20_CIN_SLCDC1_DAT6    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 20)
-#define PA21_CIN_SLCDC1_DAT7    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 21)
-#define PB30_CIN_UART4_CTS      (GPIO_PORTB | GPIO_CIN | GPIO_OUT | 30)
-#define PE5_CIN_TOUT3           (GPIO_PORTE | GPIO_CIN | GPIO_OUT | 5)
+#define PA14_CIN_SLCDC1_DAT0	(GPIO_PORTA | GPIO_CIN | GPIO_OUT | 14)
+#define PA15_CIN_SLCDC1_DAT1	(GPIO_PORTA | GPIO_CIN | GPIO_OUT | 15)
+#define PA16_CIN_SLCDC1_DAT2	(GPIO_PORTA | GPIO_CIN | GPIO_OUT | 16)
+#define PA17_CIN_SLCDC1_DAT3	(GPIO_PORTA | GPIO_CIN | GPIO_OUT | 17)
+#define PA18_CIN_SLCDC1_DAT4	(GPIO_PORTA | GPIO_CIN | GPIO_OUT | 18)
+#define PA19_CIN_SLCDC1_DAT5	(GPIO_PORTA | GPIO_CIN | GPIO_OUT | 19)
+#define PA20_CIN_SLCDC1_DAT6	(GPIO_PORTA | GPIO_CIN | GPIO_OUT | 20)
+#define PA21_CIN_SLCDC1_DAT7	(GPIO_PORTA | GPIO_CIN | GPIO_OUT | 21)
+#define PB30_CIN_UART4_CTS	(GPIO_PORTB | GPIO_CIN | GPIO_OUT | 30)
+#define PE5_CIN_TOUT3		(GPIO_PORTE | GPIO_CIN | GPIO_OUT | 5)
 
 /* AOUT GPIO pin functions */
 
-#define PB29_AOUT_UART4_RXD     (GPIO_PORTB | GPIO_AOUT | GPIO_IN | 29)
-#define PB31_AOUT_UART4_RTS     (GPIO_PORTB | GPIO_AOUT | GPIO_IN | 31)
+#define PB29_AOUT_UART4_RXD	(GPIO_PORTB | GPIO_AOUT | GPIO_IN | 29)
+#define PB31_AOUT_UART4_RTS	(GPIO_PORTB | GPIO_AOUT | GPIO_IN | 31)
 #define PC8_AOUT_USBOTG_TXR_INT (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 8)
-#define PC15_AOUT_WKGD          (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 15)
-#define PF21_AOUT_DTACK         (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 21)
-
+#define PC15_AOUT_WKGD		(GPIO_PORTC | GPIO_AOUT | GPIO_IN | 15)
+#define PF21_AOUT_DTACK		(GPIO_PORTF | GPIO_AOUT | GPIO_IN | 21)
 
-#endif
+#endif /* ifndef __MACH_IOMUX_MX2x_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index e1fc6da1cd10..e51465d7b224 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -16,12 +16,10 @@
  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
  * MA 02110-1301, USA.
  */
-
-#ifndef __MACH_MX31_IOMUX_H__
-#define __MACH_MX31_IOMUX_H__
+#ifndef __MACH_IOMUX_MX3_H__
+#define __MACH_IOMUX_MX3_H__
 
 #include <linux/types.h>
-
 /*
  * various IOMUX output functions
  */
@@ -34,7 +32,7 @@
 #define	IOMUX_OCONFIG_ALT4 (5 << 4)	/* used as alternate function 4 */
 #define	IOMUX_OCONFIG_ALT5 (6 << 4)	/* used as alternate function 5 */
 #define	IOMUX_OCONFIG_ALT6 (7 << 4)	/* used as alternate function 6 */
-#define	IOMUX_ICONFIG_NONE  0	 	/* not configured for input */
+#define	IOMUX_ICONFIG_NONE  0		/* not configured for input */
 #define	IOMUX_ICONFIG_GPIO  1		/* used as GPIO */
 #define	IOMUX_ICONFIG_FUNC  2		/* used as function */
 #define	IOMUX_ICONFIG_ALT1  4		/* used as alternate function 1 */
@@ -167,11 +165,6 @@ int mxc_iomux_mode(unsigned int pin_mode);
 	MXC_GPIO_IRQ_START)
 
 /*
- * The number of gpio devices among the pads
- */
-#define GPIO_PORT_MAX 3
-
-/*
  * This enumeration is constructed based on the Section
  * "sw_pad_ctl & sw_mux_ctl details" of the MX31 IC Spec. Each enumerated
  * value is constructed based on the rules described above.
@@ -633,40 +626,40 @@ enum iomux_pins {
 #define MX31_PIN_TXD2__GPIO1_28		IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_CSI_D4__GPIO3_4	IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_CSI_D5__GPIO3_5	IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_USBOTG_DATA0__USBOTG_DATA0    IOMUX_MODE(MX31_PIN_USBOTG_DATA0, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA1__USBOTG_DATA1    IOMUX_MODE(MX31_PIN_USBOTG_DATA1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA2__USBOTG_DATA2    IOMUX_MODE(MX31_PIN_USBOTG_DATA2, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA3__USBOTG_DATA3    IOMUX_MODE(MX31_PIN_USBOTG_DATA3, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA4__USBOTG_DATA4    IOMUX_MODE(MX31_PIN_USBOTG_DATA4, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA5__USBOTG_DATA5    IOMUX_MODE(MX31_PIN_USBOTG_DATA5, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA6__USBOTG_DATA6    IOMUX_MODE(MX31_PIN_USBOTG_DATA6, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA7__USBOTG_DATA7    IOMUX_MODE(MX31_PIN_USBOTG_DATA7, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_CLK__USBOTG_CLK        IOMUX_MODE(MX31_PIN_USBOTG_CLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DIR__USBOTG_DIR        IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_NXT__USBOTG_NXT        IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_STP__USBOTG_STP        IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI1_MOSI__USBH1_RXDM        IOMUX_MODE(MX31_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI1_MISO__USBH1_RXDP        IOMUX_MODE(MX31_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI1_SS0__USBH1_TXDM         IOMUX_MODE(MX31_PIN_CSPI1_SS0,  IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI1_SS1__USBH1_TXDP         IOMUX_MODE(MX31_PIN_CSPI1_SS1,  IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI1_SS2__USBH1_RCV          IOMUX_MODE(MX31_PIN_CSPI1_SS2,  IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI1_SCLK__USBH1_OEB         IOMUX_MODE(MX31_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI1_SPI_RDY__USBH1_FS       IOMUX_MODE(MX31_PIN_CSPI1_SPI_RDY, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_USBOTG_DATA0__USBOTG_DATA0	IOMUX_MODE(MX31_PIN_USBOTG_DATA0, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA1__USBOTG_DATA1	IOMUX_MODE(MX31_PIN_USBOTG_DATA1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA2__USBOTG_DATA2	IOMUX_MODE(MX31_PIN_USBOTG_DATA2, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA3__USBOTG_DATA3	IOMUX_MODE(MX31_PIN_USBOTG_DATA3, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA4__USBOTG_DATA4	IOMUX_MODE(MX31_PIN_USBOTG_DATA4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA5__USBOTG_DATA5	IOMUX_MODE(MX31_PIN_USBOTG_DATA5, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA6__USBOTG_DATA6	IOMUX_MODE(MX31_PIN_USBOTG_DATA6, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA7__USBOTG_DATA7	IOMUX_MODE(MX31_PIN_USBOTG_DATA7, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_CLK__USBOTG_CLK		IOMUX_MODE(MX31_PIN_USBOTG_CLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DIR__USBOTG_DIR		IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_NXT__USBOTG_NXT		IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_STP__USBOTG_STP		IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI1_MOSI__USBH1_RXDM		IOMUX_MODE(MX31_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_MISO__USBH1_RXDP		IOMUX_MODE(MX31_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SS0__USBH1_TXDM		IOMUX_MODE(MX31_PIN_CSPI1_SS0, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SS1__USBH1_TXDP		IOMUX_MODE(MX31_PIN_CSPI1_SS1, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SS2__USBH1_RCV		IOMUX_MODE(MX31_PIN_CSPI1_SS2, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SCLK__USBH1_OEB		IOMUX_MODE(MX31_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SPI_RDY__USBH1_FS	IOMUX_MODE(MX31_PIN_CSPI1_SPI_RDY, IOMUX_CONFIG_ALT1)
 #define MX31_PIN_SFS6__USBH1_SUSPEND	IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_NFRE_B__GPIO1_11	IOMUX_MODE(MX31_PIN_NFRE_B, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_NFALE__GPIO1_12	IOMUX_MODE(MX31_PIN_NFALE, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_USBH2_DATA0__USBH2_DATA0      IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBH2_DATA1__USBH2_DATA1      IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_DATA0__USBH2_DATA0	IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_DATA1__USBH2_DATA1	IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_STXD3__USBH2_DATA2	IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_SRXD3__USBH2_DATA3	IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_SCK3__USBH2_DATA4	IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_SFS3__USBH2_DATA5	IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_STXD6__USBH2_DATA6	IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_SRXD6__USBH2_DATA7	IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBH2_CLK__USBH2_CLK          IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBH2_DIR__USBH2_DIR          IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBH2_NXT__USBH2_NXT          IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBH2_STP__USBH2_STP          IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_CLK__USBH2_CLK		IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_DIR__USBH2_DIR		IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_NXT__USBH2_NXT		IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_STP__USBH2_STP		IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_SCK6__GPIO1_25		IOMUX_MODE(MX31_PIN_SCK6, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_USB_OC__GPIO1_30	IOMUX_MODE(MX31_PIN_USB_OC, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_I2C_DAT__I2C1_SDA	IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
@@ -711,8 +704,8 @@ enum iomux_pins {
 #define MX31_PIN_DSR_DCE1__GPIO2_9	IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_RI_DCE1__GPIO2_10	IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_DCD_DCE1__GPIO2_11	IOMUX_MODE(MX31_PIN_DCD_DCE1, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_STXD5__GPIO1_21       IOMUX_MODE(MX31_PIN_STXD5, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_SRXD5__GPIO1_22       IOMUX_MODE(MX31_PIN_SRXD5, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_STXD5__GPIO1_21	IOMUX_MODE(MX31_PIN_STXD5, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_SRXD5__GPIO1_22	IOMUX_MODE(MX31_PIN_SRXD5, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_GPIO1_3__GPIO1_3	IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_CSPI2_SS1__CSPI3_SS1	IOMUX_MODE(MX31_PIN_CSPI2_SS1, IOMUX_CONFIG_ALT1)
 #define MX31_PIN_RTS1__GPIO2_6		IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_GPIO)
@@ -727,13 +720,14 @@ enum iomux_pins {
 #define MX31_PIN_SCK5__SCK5		IOMUX_MODE(MX31_PIN_SCK5, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_SFS5__SFS5		IOMUX_MODE(MX31_PIN_SFS5, IOMUX_CONFIG_FUNC)
 
-/*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0
- * cspi1_ss1*/
+/*
+ * XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed with cspi2_ss0,
+ * cspi2_ss1, cspi1_ss0 cspi1_ss1
+ */
 
 /*
  * This function configures the pad value for a IOMUX pin.
  */
 void mxc_iomux_set_pad(enum iomux_pins, u32);
 
-#endif
-
+#endif /* ifndef __MACH_IOMUX_MX3_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx35.h b/arch/arm/plat-mxc/include/mach/iomux-mx35.h
index c88d40795f7a..2a24bae1b878 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx35.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx35.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C, NO_PAD_CTRL) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
+ * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx51.h b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
new file mode 100644
index 000000000000..b4f975e6a665
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
@@ -0,0 +1,326 @@
+/*
+ * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __MACH_IOMUX_MX51_H__
+#define __MACH_IOMUX_MX51_H__
+
+#include <mach/iomux-v3.h>
+
+/*
+ * various IOMUX alternate output functions (1-7)
+ */
+typedef enum iomux_config {
+	IOMUX_CONFIG_ALT0,
+	IOMUX_CONFIG_ALT1,
+	IOMUX_CONFIG_ALT2,
+	IOMUX_CONFIG_ALT3,
+	IOMUX_CONFIG_ALT4,
+	IOMUX_CONFIG_ALT5,
+	IOMUX_CONFIG_ALT6,
+	IOMUX_CONFIG_ALT7,
+	IOMUX_CONFIG_GPIO,	/* added to help user use GPIO mode */
+	IOMUX_CONFIG_SION = 0x1 << 4,	/* LOOPBACK:MUX SION bit */
+} iomux_pin_cfg_t;
+
+/* Pad control groupings */
+#define MX51_UART1_PAD_CTRL	(PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \
+				PAD_CTL_DSE_HIGH)
+#define MX51_UART2_PAD_CTRL	(PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_DSE_HIGH | \
+				PAD_CTL_SRE_FAST)
+#define MX51_UART3_PAD_CTRL	(PAD_CTL_PKE | PAD_CTL_DSE_HIGH | \
+				PAD_CTL_SRE_FAST)
+
+/*
+ * The naming convention for the pad modes is MX51_PAD_<padname>__<padmode>
+ * If <padname> or <padmode> refers to a GPIO, it is named
+ * GPIO_<unit>_<num> see also iomux-v3.h
+ */
+
+/*
+ * FIXME: This was converted using scripts from existing Freescale code to
+ * this form used upstream. Need to verify the name format.
+ */
+
+/*						PAD      MUX   ALT INPSE PATH PADCTRL */
+
+#define MX51_PAD_GPIO_2_0__EIM_D16	IOMUX_PAD(0x3f0, 0x05c, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_1__EIM_D17	IOMUX_PAD(0x3f4, 0x060, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_2__EIM_D18	IOMUX_PAD(0x3f8, 0x064, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_3__EIM_D19	IOMUX_PAD(0x3fc, 0x068, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_4__EIM_D20	IOMUX_PAD(0x400, 0x06c, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_5__EIM_D21	IOMUX_PAD(0x404, 0x070, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_6__EIM_D22	IOMUX_PAD(0x408, 0x074, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_7__EIM_D23	IOMUX_PAD(0x40c, 0x078, 1, 0x0,   0, NO_PAD_CTRL)
+
+/* Babbage UART3 */
+#define MX51_PAD_EIM_D24__UART3_CTS	IOMUX_PAD(0x410, 0x07c, IOMUX_CONFIG_ALT3, 0x0, 0, MX51_UART3_PAD_CTRL)
+#define MX51_PAD_EIM_D25__UART3_RXD	IOMUX_PAD(0x414, 0x080, IOMUX_CONFIG_ALT3, 0x9f4, 0, MX51_UART3_PAD_CTRL)
+#define MX51_PAD_EIM_D26__UART3_TXD	IOMUX_PAD(0x418, 0x084, IOMUX_CONFIG_ALT3, 0x0, 0, MX51_UART3_PAD_CTRL)
+#define MX51_PAD_EIM_D27__UART3_RTS	IOMUX_PAD(0x41c, 0x088, IOMUX_CONFIG_ALT3, 0x9f0, 0, MX51_UART3_PAD_CTRL)
+
+#define MX51_PAD_EIM_D28__EIM_D28	IOMUX_PAD(0x420, 0x08c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D29__EIM_D29	IOMUX_PAD(0x424, 0x090, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D30__EIM_D30	IOMUX_PAD(0x428, 0x094, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D31__EIM_D31	IOMUX_PAD(0x42c, 0x09c, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX51_PAD_GPIO_2_10__EIM_A16	IOMUX_PAD(0x430, 0x09c, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_11__EIM_A17	IOMUX_PAD(0x434, 0x0a0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_12__EIM_A18	IOMUX_PAD(0x438, 0x0a4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_13__EIM_A19	IOMUX_PAD(0x43c, 0x0a8, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_14__EIM_A20	IOMUX_PAD(0x440, 0x0ac, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_15__EIM_A21	IOMUX_PAD(0x444, 0x0b0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_16__EIM_A22	IOMUX_PAD(0x448, 0x0b4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_17__EIM_A23	IOMUX_PAD(0x44c, 0x0b8, 1, 0x0,   0, NO_PAD_CTRL)
+
+#define MX51_PAD_GPIO_2_18__EIM_A24	IOMUX_PAD(0x450, 0x0bc, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_19__EIM_A25	IOMUX_PAD(0x454, 0x0c0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_20__EIM_A26	IOMUX_PAD(0x458, 0x0c4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_21__EIM_A27	IOMUX_PAD(0x45c, 0x0c8, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_EB0__EIM_EB0	IOMUX_PAD(0x460, 0x0cc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_EB1__EIM_EB1	IOMUX_PAD(0x464, 0x0d0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_22__EIM_EB2	IOMUX_PAD(0x468, 0x0d4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_23__EIM_EB3	IOMUX_PAD(0x46c, 0x0d8, 1, 0x0,   0, NO_PAD_CTRL)
+
+#define MX51_PAD_GPIO_2_24__EIM_OE	IOMUX_PAD(0x470, 0x0dc, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_25__EIM_CS0	IOMUX_PAD(0x474, 0x0e0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_26__EIM_CS1	IOMUX_PAD(0x478, 0x0e4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_27__EIM_CS2	IOMUX_PAD(0x47c, 0x0e8, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_28__EIM_CS3	IOMUX_PAD(0x480, 0x0ec, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_29__EIM_CS4	IOMUX_PAD(0x484, 0x0f0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_30__EIM_CS5	IOMUX_PAD(0x488, 0x0f4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_31__EIM_DTACK	IOMUX_PAD(0x48c, 0x0f8, 1, 0x0,   0, NO_PAD_CTRL)
+
+#define MX51_PAD_GPIO_3_1__EIM_LBA	IOMUX_PAD(0x494, 0xFC, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_2__EIM_CRE	IOMUX_PAD(0x4A0, 0x100, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DRAM_CS1__DRAM_CS1	IOMUX_PAD(0x4D0, 0x104, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_3__NANDF_WE_B	IOMUX_PAD(0x4E4, 0x108, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_4__NANDF_RE_B	IOMUX_PAD(0x4E8, 0x10C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_5__NANDF_ALE	IOMUX_PAD(0x4EC, 0x110, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_6__NANDF_CLE	IOMUX_PAD(0x4F0, 0x114, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_7__NANDF_WP_B	IOMUX_PAD(0x4F4, 0x118, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_8__NANDF_RB0	IOMUX_PAD(0x4F8, 0x11C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_9__NANDF_RB1	IOMUX_PAD(0x4FC, 0x120, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_10__NANDF_RB2	IOMUX_PAD(0x500, 0x124, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_11__NANDF_RB3	IOMUX_PAD(0x504, 0x128, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_12__GPIO_NAND	IOMUX_PAD(0x514, 0x12C, 3, 0x0, 0, NO_PAD_CTRL)
+/* REVISIT: Not sure of these values
+
+  #define MX51_PAD_GPIO_1___NANDF_RB4	IOMUX_PAD(, , , 0x0, 0, NO_PAD_CTRL)
+  #define MX51_PAD_GPIO_3_13__NANDF_RB5	IOMUX_PAD(0x5D8, 0x130, 3, 0x0, 0, NO_PAD_CTRL)
+  #define MX51_PAD_GPIO_3_15__NANDF_RB7	IOMUX_PAD(0x5E0, 0x138, 3, 0x0, 0, NO_PAD_CTRL)
+*/
+#define MX51_PAD_GPIO_3_14__NANDF_RB6	IOMUX_PAD(0x5DC, 0x134, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_16__NANDF_CS0	IOMUX_PAD(0x518, 0x130, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_17__NANDF_CS1	IOMUX_PAD(0x51C, 0x134, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_18__NANDF_CS2	IOMUX_PAD(0x520, 0x138, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_19__NANDF_CS3	IOMUX_PAD(0x524, 0x13C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_20__NANDF_CS4	IOMUX_PAD(0x528, 0x140, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_21__NANDF_CS5	IOMUX_PAD(0x52C, 0x144, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_22__NANDF_CS6	IOMUX_PAD(0x530, 0x148, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_23__NANDF_CS7	IOMUX_PAD(0x534, 0x14C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_24__NANDF_RDY_INT	IOMUX_PAD(0x538, 0x150, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_25__NANDF_D15	IOMUX_PAD(0x53C, 0x154, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_26__NANDF_D14	IOMUX_PAD(0x540, 0x158, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_27__NANDF_D13	IOMUX_PAD(0x544, 0x15C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_28__NANDF_D12	IOMUX_PAD(0x548, 0x160, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_29__NANDF_D11	IOMUX_PAD(0x54C, 0x164, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_30__NANDF_D10	IOMUX_PAD(0x550, 0x168, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_31__NANDF_D9	IOMUX_PAD(0x554, 0x16C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_0__NANDF_D8	IOMUX_PAD(0x558, 0x170, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_1__NANDF_D7	IOMUX_PAD(0x55C, 0x174, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_2__NANDF_D6	IOMUX_PAD(0x560, 0x178, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_3__NANDF_D5	IOMUX_PAD(0x564, 0x17C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_4__NANDF_D4	IOMUX_PAD(0x568, 0x180, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_5__NANDF_D3	IOMUX_PAD(0x56C, 0x184, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_6__NANDF_D2	IOMUX_PAD(0x570, 0x188, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_7__NANDF_D1	IOMUX_PAD(0x574, 0x18C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_8__NANDF_D0	IOMUX_PAD(0x578, 0x190, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_12__CSI1_D8	IOMUX_PAD(0x57C, 0x194, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_13__CSI1_D9	IOMUX_PAD(0x580, 0x198, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D10__CSI1_D10	IOMUX_PAD(0x584, 0x19C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D11__CSI1_D11	IOMUX_PAD(0x588, 0x1A0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D12__CSI1_D12	IOMUX_PAD(0x58C, 0x1A4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D13__CSI1_D13	IOMUX_PAD(0x590, 0x1A8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D14__CSI1_D14	IOMUX_PAD(0x594, 0x1AC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D15__CSI1_D15	IOMUX_PAD(0x598, 0x1B0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D16__CSI1_D16	IOMUX_PAD(0x59C, 0x1B4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D17__CSI1_D17	IOMUX_PAD(0x5A0, 0x1B8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D18__CSI1_D18	IOMUX_PAD(0x5A4, 0x1BC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D19__CSI1_D19	IOMUX_PAD(0x5A8, 0x1C0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_VSYNC__CSI1_VSYNC	IOMUX_PAD(0x5AC, 0x1C4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_HSYNC__CSI1_HSYNC	IOMUX_PAD(0x5B0, 0x1C8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK	IOMUX_PAD(0x5B4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_MCLK__CSI1_MCLK	IOMUX_PAD(0x5B8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_PKE0__CSI1_PKE0	IOMUX_PAD(0x860, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_9__CSI2_D12	IOMUX_PAD(0x5BC, 0x1CC, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_10__CSI2_D13	IOMUX_PAD(0x5C0, 0x1D0, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_11__CSI2_D14	IOMUX_PAD(0x5C4, 0x1D4, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_12__CSI2_D15	IOMUX_PAD(0x5C8, 0x1D8, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_11__CSI2_D16	IOMUX_PAD(0x5CC, 0x1DC, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_12__CSI2_D17	IOMUX_PAD(0x5D0, 0x1E0, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_11__CSI2_D18	IOMUX_PAD(0x5D4, 0x1E4, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_12__CSI2_D19	IOMUX_PAD(0x5D8, 0x1E8, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_13__CSI2_VSYNC	IOMUX_PAD(0x5DC, 0x1EC, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_14__CSI2_HSYNC	IOMUX_PAD(0x5E0, 0x1F0, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_15__CSI2_PIXCLK	IOMUX_PAD(0x5E4, 0x1F4, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_PKE0__CSI2_PKE0	IOMUX_PAD(0x81C, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_16__I2C1_CLK	IOMUX_PAD(0x5E8, 0x1F8, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_17__I2C1_DAT	IOMUX_PAD(0x5EC, 0x1FC, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_18__AUD3_BB_TXD	IOMUX_PAD(0x5F0, 0x200, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_19__AUD3_BB_RXD	IOMUX_PAD(0x5F4, 0x204, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_20__AUD3_BB_CK	IOMUX_PAD(0x5F8, 0x208, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_21__AUD3_BB_FS	IOMUX_PAD(0x5FC, 0x20C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_22__CSPI1_MOSI	IOMUX_PAD(0x600, 0x210, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_23__CSPI1_MISO	IOMUX_PAD(0x604, 0x214, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_24__CSPI1_SS0	IOMUX_PAD(0x608, 0x218, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_25__CSPI1_SS1	IOMUX_PAD(0x60C, 0x21C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_26__CSPI1_RDY	IOMUX_PAD(0x610, 0x220, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_27__CSPI1_SCLK	IOMUX_PAD(0x614, 0x224, 3, 0x0, 0, NO_PAD_CTRL)
+
+/* Babbage UART1 */
+#define MX51_PAD_UART1_RXD__UART1_RXD	IOMUX_PAD(0x618, 0x228,	IOMUX_CONFIG_ALT0, 0x9e4, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST)
+#define MX51_PAD_UART1_TXD__UART1_TXD	IOMUX_PAD(0x61C, 0x22C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST)
+#define MX51_PAD_UART1_RTS__UART1_RTS	IOMUX_PAD(0x620, 0x230, IOMUX_CONFIG_ALT0, 0x9e0, 0, MX51_UART1_PAD_CTRL)
+#define MX51_PAD_UART1_CTS__UART1_CTS	IOMUX_PAD(0x624, 0x234, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_UART1_PAD_CTRL)
+
+/* Babbage UART2 */
+#define MX51_PAD_UART2_RXD__UART2_RXD	IOMUX_PAD(0x628, 0x238, IOMUX_CONFIG_ALT0, 0x9ec, 2, MX51_UART2_PAD_CTRL)
+#define MX51_PAD_UART2_TXD__UART2_TXD	IOMUX_PAD(0x62C, 0x23C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_UART2_PAD_CTRL)
+
+#define MX51_PAD_GPIO_1_22__UART3_RXD	IOMUX_PAD(0x630, 0x240, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_23__UART3_TXD	IOMUX_PAD(0x634, 0x244, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_24__OWIRE_LINE	IOMUX_PAD(0x638, 0x248, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_ROW0__KEY_ROW0	IOMUX_PAD(0x63C, 0x24C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_ROW1__KEY_ROW1	IOMUX_PAD(0x640, 0x250, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_ROW2__KEY_ROW2	IOMUX_PAD(0x644, 0x254, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_ROW3__KEY_ROW3	IOMUX_PAD(0x648, 0x258, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL0__KEY_COL0	IOMUX_PAD(0x64C, 0x25C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL1__KEY_COL1	IOMUX_PAD(0x650, 0x260, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL2__KEY_COL2	IOMUX_PAD(0x654, 0x264, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL3__KEY_COL3	IOMUX_PAD(0x658, 0x268, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL4__KEY_COL4	IOMUX_PAD(0x65C, 0x26C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL5__KEY_COL5	IOMUX_PAD(0x660, 0x270, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_25__USBH1_CLK	IOMUX_PAD(0x678, 0x278, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_26__USBH1_DIR	IOMUX_PAD(0x67C, 0x27C, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_27__USBH1_STP	IOMUX_PAD(0x680, 0x280, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_28__USBH1_NXT	IOMUX_PAD(0x684, 0x284, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_11__USBH1_DATA0	IOMUX_PAD(0x688, 0x288, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_12__USBH1_DATA1	IOMUX_PAD(0x68C, 0x28C, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_13__USBH1_DATA2	IOMUX_PAD(0x690, 0x290, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_14__USBH1_DATA3	IOMUX_PAD(0x694, 0x294, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_15__USBH1_DATA4	IOMUX_PAD(0x698, 0x298, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_16__USBH1_DATA5	IOMUX_PAD(0x69C, 0x29C, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_17__USBH1_DATA6	IOMUX_PAD(0x6A0, 0x2A0, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_18__USBH1_DATA7	IOMUX_PAD(0x6A4, 0x2A4, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_0__DI1_PIN11	IOMUX_PAD(0x6A8, 0x2A8, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_1__DI1_PIN12	IOMUX_PAD(0x6AC, 0x2AC, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_2__DI1_PIN13	IOMUX_PAD(0x6B0, 0x2B0, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_3__DI1_D0_CS	IOMUX_PAD(0x6B4, 0x2B4, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_4__DI1_D1_CS	IOMUX_PAD(0x6B8, 0x2B8, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_5__DISPB2_SER_DIN	IOMUX_PAD(0x6BC, 0x2BC, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_6__DISPB2_SER_DIO	IOMUX_PAD(0x6C0, 0x2C0, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_7__DISPB2_SER_CLK	IOMUX_PAD(0x6C4, 0x2C4, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_8__DISPB2_SER_RS	IOMUX_PAD(0x6C8, 0x2C8, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT0__DISP1_DAT0	IOMUX_PAD(0x6CC, 0x2CC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT1__DISP1_DAT1	IOMUX_PAD(0x6D0, 0x2D0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT2__DISP1_DAT2	IOMUX_PAD(0x6D4, 0x2D4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT3__DISP1_DAT3	IOMUX_PAD(0x6D8, 0x2D8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT4__DISP1_DAT4	IOMUX_PAD(0x6DC, 0x2DC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT5__DISP1_DAT5	IOMUX_PAD(0x6E0, 0x2E0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT6__DISP1_DAT6	IOMUX_PAD(0x6E4, 0x2E4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT7__DISP1_DAT7	IOMUX_PAD(0x6E8, 0x2E8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT8__DISP1_DAT8	IOMUX_PAD(0x6EC, 0x2EC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT9__DISP1_DAT9	IOMUX_PAD(0x6F0, 0x2F0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT10__DISP1_DAT10	IOMUX_PAD(0x6F4, 0x2F4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT11__DISP1_DAT11	IOMUX_PAD(0x6F8, 0x2F8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT12__DISP1_DAT12	IOMUX_PAD(0x6FC, 0x2FC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT13__DISP1_DAT13	IOMUX_PAD(0x700, 0x300, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT14__DISP1_DAT14	IOMUX_PAD(0x704, 0x304, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT15__DISP1_DAT15	IOMUX_PAD(0x708, 0x308, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT16__DISP1_DAT16	IOMUX_PAD(0x70C, 0x30C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT17__DISP1_DAT17	IOMUX_PAD(0x710, 0x310, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT18__DISP1_DAT18	IOMUX_PAD(0x714, 0x314, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT19__DISP1_DAT19	IOMUX_PAD(0x718, 0x318, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT20__DISP1_DAT20	IOMUX_PAD(0x71C, 0x31C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT21__DISP1_DAT21	IOMUX_PAD(0x720, 0x320, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT22__DISP1_DAT22	IOMUX_PAD(0x724, 0x324, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT23__DISP1_DAT23	IOMUX_PAD(0x728, 0x328, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_PIN3__DI1_PIN3	IOMUX_PAD(0x72C, 0x32C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_PIN2__DI1_PIN2	IOMUX_PAD(0x734, 0x330, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP1__DI_GP1	IOMUX_PAD(0x73C, 0x334, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP2__DI_GP2	IOMUX_PAD(0x740, 0x338, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP3__DI_GP3	IOMUX_PAD(0x744, 0x33C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI2_PIN4__DI2_PIN4	IOMUX_PAD(0x748, 0x340, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI2_PIN2__DI2_PIN2	IOMUX_PAD(0x74C, 0x344, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI2_PIN3__DI2_PIN3	IOMUX_PAD(0x750, 0x348, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK	IOMUX_PAD(0x754, 0x34C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP4__DI_GP4	IOMUX_PAD(0x758, 0x350, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT0__DISP2_DAT0	IOMUX_PAD(0x75C, 0x354, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT1__DISP2_DAT1	IOMUX_PAD(0x760, 0x358, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT2__DISP2_DAT2	IOMUX_PAD(0x764, 0x35C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT3__DISP2_DAT3	IOMUX_PAD(0x768, 0x360, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT4__DISP2_DAT4	IOMUX_PAD(0x76C, 0x364, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT5__DISP2_DAT5	IOMUX_PAD(0x770, 0x368, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_19__DISP2_DAT6	IOMUX_PAD(0x774, 0x36C, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_29__DISP2_DAT7	IOMUX_PAD(0x778, 0x370, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_30__DISP2_DAT8	IOMUX_PAD(0x77C, 0x374, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_31__DISP2_DAT9	IOMUX_PAD(0x780, 0x378, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT10__DISP2_DAT10	IOMUX_PAD(0x784, 0x37C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT11__DISP2_DAT11	IOMUX_PAD(0x788, 0x380, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT12__DISP2_DAT12	IOMUX_PAD(0x78C, 0x384, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT13__DISP2_DAT13	IOMUX_PAD(0x790, 0x388, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT14__DISP2_DAT14	IOMUX_PAD(0x794, 0x38C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT15__DISP2_DAT15	IOMUX_PAD(0x798, 0x390, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_CMD__SD1_CMD	IOMUX_PAD(0x79C, 0x394, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_CLK__SD1_CLK	IOMUX_PAD(0x7A0, 0x398, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA0__SD1_DATA0	IOMUX_PAD(0x7A4, 0x39C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA1__SD1_DATA1	IOMUX_PAD(0x7A8, 0x3A0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA2__SD1_DATA2	IOMUX_PAD(0x7AC, 0x3A4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA3__SD1_DATA3	IOMUX_PAD(0x7B0, 0x3A8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_0__GPIO1_0	IOMUX_PAD(0x7B4, 0x3AC, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_1__GPIO1_1	IOMUX_PAD(0x7B8, 0x3B0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_CMD__SD2_CMD	IOMUX_PAD(0x7BC, 0x3B4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_CLK__SD2_CLK	IOMUX_PAD(0x7C0, 0x3B8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_DATA0__SD2_DATA0	IOMUX_PAD(0x7C4, 0x3BC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_DATA1__SD2_DATA1	IOMUX_PAD(0x7C8, 0x3C0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_DATA2__SD2_DATA2	IOMUX_PAD(0x7CC, 0x3C4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_DATA3__SD2_DATA3	IOMUX_PAD(0x7D0, 0x3C8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_2__GPIO1_2	IOMUX_PAD(0x7D4, 0x3CC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_3__GPIO1_3	IOMUX_PAD(0x7D8, 0x3D0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ	IOMUX_PAD(0x7FC, 0x3D4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_4__GPIO1_4	IOMUX_PAD(0x804, 0x3D8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_5__GPIO1_5	IOMUX_PAD(0x808, 0x3DC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_6__GPIO1_6	IOMUX_PAD(0x80C, 0x3E0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_7__GPIO1_7	IOMUX_PAD(0x810, 0x3E4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_8__GPIO1_8	IOMUX_PAD(0x814, 0x3E8, 0, 0x0, 1, \
+						(PAD_CTL_SRE_SLOW | PAD_CTL_DSE_MED | PAD_CTL_PUS_100K_UP |  PAD_CTL_HYS))
+#define MX51_PAD_GPIO_1_9__GPIO1_9	IOMUX_PAD(0x818, 0x3EC, 0, 0x0, 0, NO_PAD_CTRL)
+
+/* EIM */
+#define MX51_PAD_EIM_DA0__EIM_DA0	IOMUX_PAD(0x7a8, 0x01c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA1__EIM_DA1	IOMUX_PAD(0x7a8, 0x020, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA2__EIM_DA2	IOMUX_PAD(0x7a8, 0x024, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA3__EIM_DA3	IOMUX_PAD(0x7a8, 0x028, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA4__EIM_DA4	IOMUX_PAD(0x7ac, 0x02c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA5__EIM_DA5	IOMUX_PAD(0x7ac, 0x030, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA6__EIM_DA6	IOMUX_PAD(0x7ac, 0x034, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA7__EIM_DA7	IOMUX_PAD(0x7ac, 0x038, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX51_PAD_EIM_DA8__EIM_DA8	IOMUX_PAD(0x7b0, 0x03c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA9__EIM_DA9	IOMUX_PAD(0x7b0, 0x040, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA10__EIM_DA10	IOMUX_PAD(0x7b0, 0x044, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA11__EIM_DA11	IOMUX_PAD(0x7b0, 0x048, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA12__EIM_DA12	IOMUX_PAD(0x7bc, 0x04c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA13__EIM_DA13	IOMUX_PAD(0x7bc, 0x050, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA14__EIM_DA14	IOMUX_PAD(0x7bc, 0x054, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA15__EIM_DA15	IOMUX_PAD(0x7bc, 0x058, 0, 0x0,   0, NO_PAD_CTRL)
+
+#endif /* __MACH_IOMUX_MX51_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-v1.h b/arch/arm/plat-mxc/include/mach/iomux-v1.h
new file mode 100644
index 000000000000..884f5753f279
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-v1.h
@@ -0,0 +1,103 @@
+/*
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+#ifndef __MACH_IOMUX_V1_H__
+#define __MACH_IOMUX_V1_H__
+
+/*
+*  GPIO Module and I/O Multiplexer
+*  x = 0..3 for reg_A, reg_B, reg_C, reg_D
+*/
+#define MXC_DDIR(x)	(0x00 + ((x) << 8))
+#define MXC_OCR1(x)	(0x04 + ((x) << 8))
+#define MXC_OCR2(x)	(0x08 + ((x) << 8))
+#define MXC_ICONFA1(x)	(0x0c + ((x) << 8))
+#define MXC_ICONFA2(x)	(0x10 + ((x) << 8))
+#define MXC_ICONFB1(x)	(0x14 + ((x) << 8))
+#define MXC_ICONFB2(x)	(0x18 + ((x) << 8))
+#define MXC_DR(x)	(0x1c + ((x) << 8))
+#define MXC_GIUS(x)	(0x20 + ((x) << 8))
+#define MXC_SSR(x)	(0x24 + ((x) << 8))
+#define MXC_ICR1(x)	(0x28 + ((x) << 8))
+#define MXC_ICR2(x)	(0x2c + ((x) << 8))
+#define MXC_IMR(x)	(0x30 + ((x) << 8))
+#define MXC_ISR(x)	(0x34 + ((x) << 8))
+#define MXC_GPR(x)	(0x38 + ((x) << 8))
+#define MXC_SWR(x)	(0x3c + ((x) << 8))
+#define MXC_PUEN(x)	(0x40 + ((x) << 8))
+
+#define MX1_NUM_GPIO_PORT	4
+#define MX21_NUM_GPIO_PORT	6
+#define MX27_NUM_GPIO_PORT	6
+
+#define GPIO_PIN_MASK 0x1f
+
+#define GPIO_PORT_SHIFT 5
+#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT)
+
+#define GPIO_PORTA	(0 << GPIO_PORT_SHIFT)
+#define GPIO_PORTB	(1 << GPIO_PORT_SHIFT)
+#define GPIO_PORTC	(2 << GPIO_PORT_SHIFT)
+#define GPIO_PORTD	(3 << GPIO_PORT_SHIFT)
+#define GPIO_PORTE	(4 << GPIO_PORT_SHIFT)
+#define GPIO_PORTF	(5 << GPIO_PORT_SHIFT)
+
+#define GPIO_OUT	(1 << 8)
+#define GPIO_IN		(0 << 8)
+#define GPIO_PUEN	(1 << 9)
+
+#define GPIO_PF		(1 << 10)
+#define GPIO_AF		(1 << 11)
+
+#define GPIO_OCR_SHIFT 12
+#define GPIO_OCR_MASK	(3 << GPIO_OCR_SHIFT)
+#define GPIO_AIN	(0 << GPIO_OCR_SHIFT)
+#define GPIO_BIN	(1 << GPIO_OCR_SHIFT)
+#define GPIO_CIN	(2 << GPIO_OCR_SHIFT)
+#define GPIO_GPIO	(3 << GPIO_OCR_SHIFT)
+
+#define GPIO_AOUT_SHIFT	14
+#define GPIO_AOUT_MASK	(3 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT	(0 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT_ISR	(1 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT_0	(2 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT_1	(3 << GPIO_AOUT_SHIFT)
+
+#define GPIO_BOUT_SHIFT	16
+#define GPIO_BOUT_MASK	(3 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT	(0 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT_ISR	(1 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT_0	(2 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT_1	(3 << GPIO_BOUT_SHIFT)
+
+/* decode irq number to use with IMR(x), ISR(x) and friends */
+#define IRQ_TO_REG(irq) ((irq - MXC_INTERNAL_IRQS) >> 5)
+
+#define IRQ_GPIOA(x)  (MXC_GPIO_IRQ_START + x)
+#define IRQ_GPIOB(x)  (IRQ_GPIOA(32) + x)
+#define IRQ_GPIOC(x)  (IRQ_GPIOB(32) + x)
+#define IRQ_GPIOD(x)  (IRQ_GPIOC(32) + x)
+#define IRQ_GPIOE(x)  (IRQ_GPIOD(32) + x)
+#define IRQ_GPIOF(x)  (IRQ_GPIOE(32) + x)
+
+extern int mxc_gpio_mode(int gpio_mode);
+extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
+		const char *label);
+extern void mxc_gpio_release_multiple_pins(const int *pin_list, int count);
+
+#endif /* __MACH_IOMUX_V1_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h
index 1deda0184892..f2f73d31d5ba 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-v3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h
@@ -81,11 +81,13 @@ struct pad_desc {
 
 #define PAD_CTL_ODE			(1 << 3)
 
-#define PAD_CTL_DSE_STANDARD		(0 << 1)
-#define PAD_CTL_DSE_HIGH		(1 << 1)
-#define PAD_CTL_DSE_MAX			(2 << 1)
+#define PAD_CTL_DSE_LOW			(0 << 1)
+#define PAD_CTL_DSE_MED			(1 << 1)
+#define PAD_CTL_DSE_HIGH		(2 << 1)
+#define PAD_CTL_DSE_MAX			(3 << 1)
 
 #define PAD_CTL_SRE_FAST		(1 << 0)
+#define PAD_CTL_SRE_SLOW		(0 << 0)
 
 /*
  * setups a single pad in the iomuxer
diff --git a/arch/arm/plat-mxc/include/mach/iomux.h b/arch/arm/plat-mxc/include/mach/iomux.h
index 011cfcd8b820..3d226d7e7be2 100644
--- a/arch/arm/plat-mxc/include/mach/iomux.h
+++ b/arch/arm/plat-mxc/include/mach/iomux.h
@@ -1,102 +1,14 @@
 /*
-* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
-* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License
-* as published by the Free Software Foundation; either version 2
-* of the License, or (at your option) any later version.
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
-* MA 02110-1301, USA.
-*/
-
-#ifndef _MXC_IOMUX_H
-#define _MXC_IOMUX_H
-
-/*
-*  GPIO Module and I/O Multiplexer
-*  x = 0..3 for reg_A, reg_B, reg_C, reg_D
-*/
-#define VA_GPIO_BASE	IO_ADDRESS(GPIO_BASE_ADDR)
-#define MXC_DDIR(x)    (0x00 + ((x) << 8))
-#define MXC_OCR1(x)    (0x04 + ((x) << 8))
-#define MXC_OCR2(x)    (0x08 + ((x) << 8))
-#define MXC_ICONFA1(x) (0x0c + ((x) << 8))
-#define MXC_ICONFA2(x) (0x10 + ((x) << 8))
-#define MXC_ICONFB1(x) (0x14 + ((x) << 8))
-#define MXC_ICONFB2(x) (0x18 + ((x) << 8))
-#define MXC_DR(x)      (0x1c + ((x) << 8))
-#define MXC_GIUS(x)    (0x20 + ((x) << 8))
-#define MXC_SSR(x)     (0x24 + ((x) << 8))
-#define MXC_ICR1(x)    (0x28 + ((x) << 8))
-#define MXC_ICR2(x)    (0x2c + ((x) << 8))
-#define MXC_IMR(x)     (0x30 + ((x) << 8))
-#define MXC_ISR(x)     (0x34 + ((x) << 8))
-#define MXC_GPR(x)     (0x38 + ((x) << 8))
-#define MXC_SWR(x)     (0x3c + ((x) << 8))
-#define MXC_PUEN(x)    (0x40 + ((x) << 8))
-
-#ifdef CONFIG_ARCH_MX1
-# define GPIO_PORT_MAX  3
-#endif
-#ifdef CONFIG_ARCH_MX2
-# define GPIO_PORT_MAX  5
-#endif
-#ifdef CONFIG_ARCH_MX25
-# define GPIO_PORT_MAX  3
-#endif
-
-#ifndef GPIO_PORT_MAX
-# error "GPIO config port count unknown!"
-#endif
-
-#define GPIO_PIN_MASK 0x1f
-
-#define GPIO_PORT_SHIFT 5
-#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT)
-
-#define GPIO_PORTA (0 << GPIO_PORT_SHIFT)
-#define GPIO_PORTB (1 << GPIO_PORT_SHIFT)
-#define GPIO_PORTC (2 << GPIO_PORT_SHIFT)
-#define GPIO_PORTD (3 << GPIO_PORT_SHIFT)
-#define GPIO_PORTE (4 << GPIO_PORT_SHIFT)
-#define GPIO_PORTF (5 << GPIO_PORT_SHIFT)
-
-#define GPIO_OUT   (1 << 8)
-#define GPIO_IN    (0 << 8)
-#define GPIO_PUEN  (1 << 9)
-
-#define GPIO_PF    (1 << 10)
-#define GPIO_AF    (1 << 11)
-
-#define GPIO_OCR_SHIFT 12
-#define GPIO_OCR_MASK (3 << GPIO_OCR_SHIFT)
-#define GPIO_AIN   (0 << GPIO_OCR_SHIFT)
-#define GPIO_BIN   (1 << GPIO_OCR_SHIFT)
-#define GPIO_CIN   (2 << GPIO_OCR_SHIFT)
-#define GPIO_GPIO  (3 << GPIO_OCR_SHIFT)
-
-#define GPIO_AOUT_SHIFT 14
-#define GPIO_AOUT_MASK (3 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT     (0 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT_ISR (1 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT_0   (2 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT_1   (3 << GPIO_AOUT_SHIFT)
-
-#define GPIO_BOUT_SHIFT 16
-#define GPIO_BOUT_MASK (3 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT      (0 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT_ISR  (1 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT_0    (2 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT_1    (3 << GPIO_BOUT_SHIFT)
+ * Copyright (C) 2010 Uwe Kleine-Koenig, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __MACH_IOMUX_H__
+#define __MACH_IOMUX_H__
 
+/* This file will go away, please include mach/iomux-mx... directly */
 
 #ifdef CONFIG_ARCH_MX1
 #include <mach/iomux-mx1.h>
@@ -110,25 +22,5 @@
 #include <mach/iomux-mx27.h>
 #endif
 #endif
-#ifdef CONFIG_ARCH_MX25
-#include <mach/iomux-mx25.h>
-#endif
 
-
-/* decode irq number to use with IMR(x), ISR(x) and friends */
-#define IRQ_TO_REG(irq) ((irq - MXC_INTERNAL_IRQS) >> 5)
-
-#define IRQ_GPIOA(x)  (MXC_GPIO_IRQ_START + x)
-#define IRQ_GPIOB(x)  (IRQ_GPIOA(32) + x)
-#define IRQ_GPIOC(x)  (IRQ_GPIOB(32) + x)
-#define IRQ_GPIOD(x)  (IRQ_GPIOC(32) + x)
-#define IRQ_GPIOE(x)  (IRQ_GPIOD(32) + x)
-#define IRQ_GPIOF(x)  (IRQ_GPIOE(32) + x)
-
-
-extern void mxc_gpio_mode(int gpio_mode);
-extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
-	const char *label);
-extern void mxc_gpio_release_multiple_pins(const int *pin_list, int count);
-
-#endif
+#endif /* __MACH_IOMUX_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index 0cb347645db4..86781f7b0c0c 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -12,22 +12,29 @@
 #define __ASM_ARCH_MXC_IRQS_H__
 
 /*
- * So far all i.MX SoCs have 64 internal interrupts
+ * SoCs with TZIC interrupt controller have 128 IRQs, those with AVIC have 64
  */
+#ifdef CONFIG_MXC_TZIC
+#define MXC_INTERNAL_IRQS	128
+#else
 #define MXC_INTERNAL_IRQS	64
+#endif
 
 #define MXC_GPIO_IRQ_START	MXC_INTERNAL_IRQS
 
-#if defined CONFIG_ARCH_MX1
-#define MXC_GPIO_IRQS		(32 * 4)
-#elif defined CONFIG_ARCH_MX2
+/* these are ordered by size to support multi-SoC kernels */
+#if defined CONFIG_ARCH_MX2
 #define MXC_GPIO_IRQS		(32 * 6)
-#elif defined CONFIG_ARCH_MX3
-#define MXC_GPIO_IRQS		(32 * 3)
+#elif defined CONFIG_ARCH_MX1
+#define MXC_GPIO_IRQS		(32 * 4)
 #elif defined CONFIG_ARCH_MX25
 #define MXC_GPIO_IRQS		(32 * 4)
+#elif defined CONFIG_ARCH_MX5
+#define MXC_GPIO_IRQS		(32 * 4)
 #elif defined CONFIG_ARCH_MXC91231
 #define MXC_GPIO_IRQS		(32 * 4)
+#elif defined CONFIG_ARCH_MX3
+#define MXC_GPIO_IRQS		(32 * 3)
 #endif
 
 /*
@@ -51,6 +58,7 @@
 #else
 #define MX3_IPU_IRQS 0
 #endif
+/* REVISIT: Add IPU irqs on IMX51 */
 
 #define NR_IRQS			(MXC_IPU_IRQ_START + MX3_IPU_IRQS)
 
diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h
index d3afafdcc0e5..c4b40c35a6a1 100644
--- a/arch/arm/plat-mxc/include/mach/memory.h
+++ b/arch/arm/plat-mxc/include/mach/memory.h
@@ -11,37 +11,45 @@
 #ifndef __ASM_ARCH_MXC_MEMORY_H__
 #define __ASM_ARCH_MXC_MEMORY_H__
 
-#if defined CONFIG_ARCH_MX1
-#define PHYS_OFFSET		UL(0x08000000)
-#elif defined CONFIG_ARCH_MX2
-#ifdef CONFIG_MACH_MX21
-#define PHYS_OFFSET		UL(0xC0000000)
-#endif
-#ifdef CONFIG_MACH_MX27
-#define PHYS_OFFSET		UL(0xA0000000)
-#endif
-#elif defined CONFIG_ARCH_MX3
-#define PHYS_OFFSET		UL(0x80000000)
-#elif defined CONFIG_ARCH_MX25
-#define PHYS_OFFSET		UL(0x80000000)
-#elif defined CONFIG_ARCH_MXC91231
-#define PHYS_OFFSET		UL(0x90000000)
+#define MX1_PHYS_OFFSET		UL(0x08000000)
+#define MX21_PHYS_OFFSET	UL(0xc0000000)
+#define MX25_PHYS_OFFSET	UL(0x80000000)
+#define MX27_PHYS_OFFSET	UL(0xa0000000)
+#define MX3x_PHYS_OFFSET	UL(0x80000000)
+#define MX51_PHYS_OFFSET	UL(0x90000000)
+#define MXC91231_PHYS_OFFSET	UL(0x90000000)
+
+#if !defined(CONFIG_RUNTIME_PHYS_OFFSET)
+# if defined CONFIG_ARCH_MX1
+#  define PHYS_OFFSET		MX1_PHYS_OFFSET
+# elif defined CONFIG_MACH_MX21
+#  define PHYS_OFFSET		MX21_PHYS_OFFSET
+# elif defined CONFIG_ARCH_MX25
+#  define PHYS_OFFSET		MX25_PHYS_OFFSET
+# elif defined CONFIG_MACH_MX27
+#  define PHYS_OFFSET		MX27_PHYS_OFFSET
+# elif defined CONFIG_ARCH_MX3
+#  define PHYS_OFFSET		MX3x_PHYS_OFFSET
+# elif defined CONFIG_ARCH_MXC91231
+#  define PHYS_OFFSET		MXC91231_PHYS_OFFSET
+# elif defined CONFIG_ARCH_MX5
+#  define PHYS_OFFSET		MX51_PHYS_OFFSET
+# endif
 #endif
 
-#if defined(CONFIG_MX1_VIDEO)
+#if defined(CONFIG_MX3_VIDEO)
 /*
  * Increase size of DMA-consistent memory region.
- * This is required for i.MX camera driver to capture at least four VGA frames.
+ * This is required for mx3 camera driver to capture at least two QXGA frames.
  */
-#define CONSISTENT_DMA_SIZE SZ_4M
-#endif /* CONFIG_MX1_VIDEO */
+#define CONSISTENT_DMA_SIZE SZ_8M
 
-#if defined(CONFIG_MX3_VIDEO)
+#elif defined(CONFIG_MX1_VIDEO)
 /*
  * Increase size of DMA-consistent memory region.
- * This is required for mx3 camera driver to capture at least two QXGA frames.
+ * This is required for i.MX camera driver to capture at least four VGA frames.
  */
-#define CONSISTENT_DMA_SIZE SZ_8M
-#endif /* CONFIG_MX3_VIDEO */
+#define CONSISTENT_DMA_SIZE SZ_4M
+#endif /* CONFIG_MX1_VIDEO */
 
 #endif /* __ASM_ARCH_MXC_MEMORY_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mtd-xip.h b/arch/arm/plat-mxc/include/mach/mtd-xip.h
deleted file mode 100644
index 1ab1bba5688d..000000000000
--- a/arch/arm/plat-mxc/include/mach/mtd-xip.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * MTD primitives for XIP support. Architecture specific functions
- *
- * Do not include this file directly. It's included from linux/mtd/xip.h
- *
- * Copyright (C) 2008 Darius Augulis <augulis.darius@gmail.com>, Teltonika, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <mach/mxc_timer.h>
-
-#ifndef __ARCH_IMX_MTD_XIP_H__
-#define __ARCH_IMX_MTD_XIP_H__
-
-#ifdef CONFIG_ARCH_MX1
-/* AITC registers */
-#define AITC_BASE	IO_ADDRESS(AVIC_BASE_ADDR)
-#define NIPNDH		(AITC_BASE + 0x58)
-#define NIPNDL		(AITC_BASE + 0x5C)
-#define INTENABLEH	(AITC_BASE + 0x10)
-#define INTENABLEL	(AITC_BASE + 0x14)
-/* MTD macros */
-#define xip_irqpending() ((__raw_readl(INTENABLEH) &  __raw_readl(NIPNDH)) \
-			|| (__raw_readl(INTENABLEL) &  __raw_readl(NIPNDL)))
-#define xip_currtime()		(__raw_readl(TIMER_BASE + MXC_TCN))
-#define xip_elapsed_since(x)	(signed)((__raw_readl(TIMER_BASE + MXC_TCN) - (x)) / 96)
-#define xip_cpu_idle()		asm volatile ("mcr p15, 0, %0, c7, c0, 4" :: "r" (0))
-#endif /* CONFIG_ARCH_MX1 */
-
-#endif /* __ARCH_IMX_MTD_XIP_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h
index 1b2890a5c452..5eba7e6785de 100644
--- a/arch/arm/plat-mxc/include/mach/mx1.h
+++ b/arch/arm/plat-mxc/include/mach/mx1.h
@@ -9,156 +9,289 @@
  * published by the Free Software Foundation.
  */
 
-#ifndef __ASM_ARCH_MXC_MX1_H__
-#define __ASM_ARCH_MXC_MX1_H__
+#ifndef __MACH_MX1_H__
+#define __MACH_MX1_H__
 
 #include <mach/vmalloc.h>
 
 /*
  * Memory map
  */
-#define IMX_IO_PHYS	0x00200000
-#define IMX_IO_SIZE	0x00100000
-#define IMX_IO_BASE	VMALLOC_END
+#define MX1_IO_BASE_ADDR	0x00200000
+#define MX1_IO_SIZE		SZ_1M
+#define MX1_IO_BASE_ADDR_VIRT	VMALLOC_END
 
-#define IMX_CS0_PHYS	0x10000000
-#define IMX_CS0_SIZE	0x02000000
+#define MX1_CS0_PHYS		0x10000000
+#define MX1_CS0_SIZE		0x02000000
 
-#define IMX_CS1_PHYS	0x12000000
-#define IMX_CS1_SIZE	0x01000000
+#define MX1_CS1_PHYS		0x12000000
+#define MX1_CS1_SIZE		0x01000000
 
-#define IMX_CS2_PHYS	0x13000000
-#define IMX_CS2_SIZE	0x01000000
+#define MX1_CS2_PHYS		0x13000000
+#define MX1_CS2_SIZE		0x01000000
 
-#define IMX_CS3_PHYS	0x14000000
-#define IMX_CS3_SIZE	0x01000000
+#define MX1_CS3_PHYS		0x14000000
+#define MX1_CS3_SIZE		0x01000000
 
-#define IMX_CS4_PHYS	0x15000000
-#define IMX_CS4_SIZE	0x01000000
+#define MX1_CS4_PHYS		0x15000000
+#define MX1_CS4_SIZE		0x01000000
 
-#define IMX_CS5_PHYS	0x16000000
-#define IMX_CS5_SIZE	0x01000000
+#define MX1_CS5_PHYS		0x16000000
+#define MX1_CS5_SIZE		0x01000000
 
 /*
  *  Register BASEs, based on OFFSETs
  */
-#define AIPI1_BASE_ADDR		(0x00000 + IMX_IO_PHYS)
-#define WDT_BASE_ADDR		(0x01000 + IMX_IO_PHYS)
-#define TIM1_BASE_ADDR		(0x02000 + IMX_IO_PHYS)
-#define TIM2_BASE_ADDR		(0x03000 + IMX_IO_PHYS)
-#define RTC_BASE_ADDR		(0x04000 + IMX_IO_PHYS)
-#define LCDC_BASE_ADDR		(0x05000 + IMX_IO_PHYS)
-#define UART1_BASE_ADDR		(0x06000 + IMX_IO_PHYS)
-#define UART2_BASE_ADDR		(0x07000 + IMX_IO_PHYS)
-#define PWM_BASE_ADDR		(0x08000 + IMX_IO_PHYS)
-#define DMA_BASE_ADDR		(0x09000 + IMX_IO_PHYS)
-#define AIPI2_BASE_ADDR		(0x10000 + IMX_IO_PHYS)
-#define SIM_BASE_ADDR		(0x11000 + IMX_IO_PHYS)
-#define USBD_BASE_ADDR		(0x12000 + IMX_IO_PHYS)
-#define SPI1_BASE_ADDR		(0x13000 + IMX_IO_PHYS)
-#define MMC_BASE_ADDR		(0x14000 + IMX_IO_PHYS)
-#define ASP_BASE_ADDR		(0x15000 + IMX_IO_PHYS)
-#define BTA_BASE_ADDR		(0x16000 + IMX_IO_PHYS)
-#define I2C_BASE_ADDR		(0x17000 + IMX_IO_PHYS)
-#define SSI_BASE_ADDR		(0x18000 + IMX_IO_PHYS)
-#define SPI2_BASE_ADDR		(0x19000 + IMX_IO_PHYS)
-#define MSHC_BASE_ADDR		(0x1A000 + IMX_IO_PHYS)
-#define CCM_BASE_ADDR		(0x1B000 + IMX_IO_PHYS)
-#define SCM_BASE_ADDR		(0x1B804 + IMX_IO_PHYS)
-#define GPIO_BASE_ADDR		(0x1C000 + IMX_IO_PHYS)
-#define EIM_BASE_ADDR		(0x20000 + IMX_IO_PHYS)
-#define SDRAMC_BASE_ADDR	(0x21000 + IMX_IO_PHYS)
-#define MMA_BASE_ADDR		(0x22000 + IMX_IO_PHYS)
-#define AVIC_BASE_ADDR		(0x23000 + IMX_IO_PHYS)
-#define CSI_BASE_ADDR		(0x24000 + IMX_IO_PHYS)
+#define MX1_AIPI1_BASE_ADDR		(0x00000 + MX1_IO_BASE_ADDR)
+#define MX1_WDT_BASE_ADDR		(0x01000 + MX1_IO_BASE_ADDR)
+#define MX1_TIM1_BASE_ADDR		(0x02000 + MX1_IO_BASE_ADDR)
+#define MX1_TIM2_BASE_ADDR		(0x03000 + MX1_IO_BASE_ADDR)
+#define MX1_RTC_BASE_ADDR		(0x04000 + MX1_IO_BASE_ADDR)
+#define MX1_LCDC_BASE_ADDR		(0x05000 + MX1_IO_BASE_ADDR)
+#define MX1_UART1_BASE_ADDR		(0x06000 + MX1_IO_BASE_ADDR)
+#define MX1_UART2_BASE_ADDR		(0x07000 + MX1_IO_BASE_ADDR)
+#define MX1_PWM_BASE_ADDR		(0x08000 + MX1_IO_BASE_ADDR)
+#define MX1_DMA_BASE_ADDR		(0x09000 + MX1_IO_BASE_ADDR)
+#define MX1_AIPI2_BASE_ADDR		(0x10000 + MX1_IO_BASE_ADDR)
+#define MX1_SIM_BASE_ADDR		(0x11000 + MX1_IO_BASE_ADDR)
+#define MX1_USBD_BASE_ADDR		(0x12000 + MX1_IO_BASE_ADDR)
+#define MX1_SPI1_BASE_ADDR		(0x13000 + MX1_IO_BASE_ADDR)
+#define MX1_MMC_BASE_ADDR		(0x14000 + MX1_IO_BASE_ADDR)
+#define MX1_ASP_BASE_ADDR		(0x15000 + MX1_IO_BASE_ADDR)
+#define MX1_BTA_BASE_ADDR		(0x16000 + MX1_IO_BASE_ADDR)
+#define MX1_I2C_BASE_ADDR		(0x17000 + MX1_IO_BASE_ADDR)
+#define MX1_SSI_BASE_ADDR		(0x18000 + MX1_IO_BASE_ADDR)
+#define MX1_SPI2_BASE_ADDR		(0x19000 + MX1_IO_BASE_ADDR)
+#define MX1_MSHC_BASE_ADDR		(0x1A000 + MX1_IO_BASE_ADDR)
+#define MX1_CCM_BASE_ADDR		(0x1B000 + MX1_IO_BASE_ADDR)
+#define MX1_SCM_BASE_ADDR		(0x1B804 + MX1_IO_BASE_ADDR)
+#define MX1_GPIO_BASE_ADDR		(0x1C000 + MX1_IO_BASE_ADDR)
+#define MX1_EIM_BASE_ADDR		(0x20000 + MX1_IO_BASE_ADDR)
+#define MX1_SDRAMC_BASE_ADDR		(0x21000 + MX1_IO_BASE_ADDR)
+#define MX1_MMA_BASE_ADDR		(0x22000 + MX1_IO_BASE_ADDR)
+#define MX1_AVIC_BASE_ADDR		(0x23000 + MX1_IO_BASE_ADDR)
+#define MX1_CSI_BASE_ADDR		(0x24000 + MX1_IO_BASE_ADDR)
 
 /* macro to get at IO space when running virtually */
-#define IO_ADDRESS(x)	((x) - IMX_IO_PHYS + IMX_IO_BASE)
-
-/* define macros needed for entry-macro.S */
-#define AVIC_IO_ADDRESS(x)	IO_ADDRESS(x)
+#define MX1_IO_ADDRESS(x) (						\
+	IMX_IO_ADDRESS(x, MX1_IO))
 
 /* fixed interrput numbers */
-#define INT_SOFTINT		0
-#define CSI_INT			6
-#define DSPA_MAC_INT		7
-#define DSPA_INT		8
-#define COMP_INT		9
-#define MSHC_XINT		10
-#define GPIO_INT_PORTA		11
-#define GPIO_INT_PORTB		12
-#define GPIO_INT_PORTC		13
-#define LCDC_INT		14
-#define SIM_INT			15
-#define SIM_DATA_INT		16
-#define RTC_INT			17
-#define RTC_SAMINT		18
-#define UART2_MINT_PFERR	19
-#define UART2_MINT_RTS		20
-#define UART2_MINT_DTR		21
-#define UART2_MINT_UARTC	22
-#define UART2_MINT_TX		23
-#define UART2_MINT_RX		24
-#define UART1_MINT_PFERR	25
-#define UART1_MINT_RTS		26
-#define UART1_MINT_DTR		27
-#define UART1_MINT_UARTC	28
-#define UART1_MINT_TX		29
-#define UART1_MINT_RX		30
-#define VOICE_DAC_INT		31
-#define VOICE_ADC_INT		32
-#define PEN_DATA_INT		33
-#define PWM_INT			34
-#define SDHC_INT		35
-#define I2C_INT			39
-#define CSPI_INT		41
-#define SSI_TX_INT		42
-#define SSI_TX_ERR_INT		43
-#define SSI_RX_INT		44
-#define SSI_RX_ERR_INT		45
-#define TOUCH_INT		46
-#define USBD_INT0		47
-#define USBD_INT1		48
-#define USBD_INT2		49
-#define USBD_INT3		50
-#define USBD_INT4		51
-#define USBD_INT5		52
-#define USBD_INT6		53
-#define BTSYS_INT		55
-#define BTTIM_INT		56
-#define BTWUI_INT		57
-#define TIM2_INT		58
-#define TIM1_INT		59
-#define DMA_ERR			60
-#define DMA_INT			61
-#define GPIO_INT_PORTD		62
-#define WDT_INT			63
+#define MX1_INT_SOFTINT		0
+#define MX1_CSI_INT		6
+#define MX1_DSPA_MAC_INT	7
+#define MX1_DSPA_INT		8
+#define MX1_COMP_INT		9
+#define MX1_MSHC_XINT		10
+#define MX1_GPIO_INT_PORTA	11
+#define MX1_GPIO_INT_PORTB	12
+#define MX1_GPIO_INT_PORTC	13
+#define MX1_LCDC_INT		14
+#define MX1_SIM_INT		15
+#define MX1_SIM_DATA_INT	16
+#define MX1_RTC_INT		17
+#define MX1_RTC_SAMINT		18
+#define MX1_UART2_MINT_PFERR	19
+#define MX1_UART2_MINT_RTS	20
+#define MX1_UART2_MINT_DTR	21
+#define MX1_UART2_MINT_UARTC	22
+#define MX1_UART2_MINT_TX	23
+#define MX1_UART2_MINT_RX	24
+#define MX1_UART1_MINT_PFERR	25
+#define MX1_UART1_MINT_RTS	26
+#define MX1_UART1_MINT_DTR	27
+#define MX1_UART1_MINT_UARTC	28
+#define MX1_UART1_MINT_TX	29
+#define MX1_UART1_MINT_RX	30
+#define MX1_VOICE_DAC_INT	31
+#define MX1_VOICE_ADC_INT	32
+#define MX1_PEN_DATA_INT	33
+#define MX1_PWM_INT		34
+#define MX1_SDHC_INT		35
+#define MX1_I2C_INT		39
+#define MX1_CSPI_INT		41
+#define MX1_SSI_TX_INT		42
+#define MX1_SSI_TX_ERR_INT	43
+#define MX1_SSI_RX_INT		44
+#define MX1_SSI_RX_ERR_INT	45
+#define MX1_TOUCH_INT		46
+#define MX1_USBD_INT0		47
+#define MX1_USBD_INT1		48
+#define MX1_USBD_INT2		49
+#define MX1_USBD_INT3		50
+#define MX1_USBD_INT4		51
+#define MX1_USBD_INT5		52
+#define MX1_USBD_INT6		53
+#define MX1_BTSYS_INT		55
+#define MX1_BTTIM_INT		56
+#define MX1_BTWUI_INT		57
+#define MX1_TIM2_INT		58
+#define MX1_TIM1_INT		59
+#define MX1_DMA_ERR		60
+#define MX1_DMA_INT		61
+#define MX1_GPIO_INT_PORTD	62
+#define MX1_WDT_INT		63
 
 /* DMA */
-#define DMA_REQ_UART3_T		2
-#define DMA_REQ_UART3_R		3
-#define DMA_REQ_SSI2_T		4
-#define DMA_REQ_SSI2_R		5
-#define DMA_REQ_CSI_STAT	6
-#define DMA_REQ_CSI_R		7
-#define DMA_REQ_MSHC		8
-#define DMA_REQ_DSPA_DCT_DOUT	9
-#define DMA_REQ_DSPA_DCT_DIN	10
-#define DMA_REQ_DSPA_MAC	11
-#define DMA_REQ_EXT		12
-#define DMA_REQ_SDHC		13
-#define DMA_REQ_SPI1_R		14
-#define DMA_REQ_SPI1_T		15
-#define DMA_REQ_SSI_T		16
-#define DMA_REQ_SSI_R		17
-#define DMA_REQ_ASP_DAC		18
-#define DMA_REQ_ASP_ADC		19
-#define DMA_REQ_USP_EP(x)	(20 + (x))
-#define DMA_REQ_SPI2_R		26
-#define DMA_REQ_SPI2_T		27
-#define DMA_REQ_UART2_T		28
-#define DMA_REQ_UART2_R		29
-#define DMA_REQ_UART1_T		30
-#define DMA_REQ_UART1_R		31
-
-#endif /*  __ASM_ARCH_MXC_MX1_H__ */
+#define MX1_DMA_REQ_UART3_T		2
+#define MX1_DMA_REQ_UART3_R		3
+#define MX1_DMA_REQ_SSI2_T		4
+#define MX1_DMA_REQ_SSI2_R		5
+#define MX1_DMA_REQ_CSI_STAT		6
+#define MX1_DMA_REQ_CSI_R		7
+#define MX1_DMA_REQ_MSHC		8
+#define MX1_DMA_REQ_DSPA_DCT_DOUT	9
+#define MX1_DMA_REQ_DSPA_DCT_DIN	10
+#define MX1_DMA_REQ_DSPA_MAC		11
+#define MX1_DMA_REQ_EXT			12
+#define MX1_DMA_REQ_SDHC		13
+#define MX1_DMA_REQ_SPI1_R		14
+#define MX1_DMA_REQ_SPI1_T		15
+#define MX1_DMA_REQ_SSI_T		16
+#define MX1_DMA_REQ_SSI_R		17
+#define MX1_DMA_REQ_ASP_DAC		18
+#define MX1_DMA_REQ_ASP_ADC		19
+#define MX1_DMA_REQ_USP_EP(x)		(20 + (x))
+#define MX1_DMA_REQ_SPI2_R		26
+#define MX1_DMA_REQ_SPI2_T		27
+#define MX1_DMA_REQ_UART2_T		28
+#define MX1_DMA_REQ_UART2_R		29
+#define MX1_DMA_REQ_UART1_T		30
+#define MX1_DMA_REQ_UART1_R		31
+
+/*
+ * This doesn't depend on IMX_NEEDS_DEPRECATED_SYMBOLS
+ * to not break drivers/usb/gadget/imx_udc.  Should go
+ * away after this driver uses the new name.
+ */
+#define USBD_INT0		MX1_USBD_INT0
+
+#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
+/* these should go away */
+#define IMX_IO_PHYS MX1_IO_BASE_ADDR
+#define IMX_IO_SIZE MX1_IO_SIZE
+#define IMX_IO_BASE MX1_IO_BASE_ADDR_VIRT
+#define IMX_CS0_PHYS MX1_CS0_PHYS
+#define IMX_CS0_SIZE MX1_CS0_SIZE
+#define IMX_CS1_PHYS MX1_CS1_PHYS
+#define IMX_CS1_SIZE MX1_CS1_SIZE
+#define IMX_CS2_PHYS MX1_CS2_PHYS
+#define IMX_CS2_SIZE MX1_CS2_SIZE
+#define IMX_CS3_PHYS MX1_CS3_PHYS
+#define IMX_CS3_SIZE MX1_CS3_SIZE
+#define IMX_CS4_PHYS MX1_CS4_PHYS
+#define IMX_CS4_SIZE MX1_CS4_SIZE
+#define IMX_CS5_PHYS MX1_CS5_PHYS
+#define IMX_CS5_SIZE MX1_CS5_SIZE
+#define AIPI1_BASE_ADDR MX1_AIPI1_BASE_ADDR
+#define WDT_BASE_ADDR MX1_WDT_BASE_ADDR
+#define TIM1_BASE_ADDR MX1_TIM1_BASE_ADDR
+#define TIM2_BASE_ADDR MX1_TIM2_BASE_ADDR
+#define RTC_BASE_ADDR MX1_RTC_BASE_ADDR
+#define LCDC_BASE_ADDR MX1_LCDC_BASE_ADDR
+#define UART1_BASE_ADDR MX1_UART1_BASE_ADDR
+#define UART2_BASE_ADDR MX1_UART2_BASE_ADDR
+#define PWM_BASE_ADDR MX1_PWM_BASE_ADDR
+#define DMA_BASE_ADDR MX1_DMA_BASE_ADDR
+#define AIPI2_BASE_ADDR MX1_AIPI2_BASE_ADDR
+#define SIM_BASE_ADDR MX1_SIM_BASE_ADDR
+#define USBD_BASE_ADDR MX1_USBD_BASE_ADDR
+#define SPI1_BASE_ADDR MX1_SPI1_BASE_ADDR
+#define MMC_BASE_ADDR MX1_MMC_BASE_ADDR
+#define ASP_BASE_ADDR MX1_ASP_BASE_ADDR
+#define BTA_BASE_ADDR MX1_BTA_BASE_ADDR
+#define I2C_BASE_ADDR MX1_I2C_BASE_ADDR
+#define SSI_BASE_ADDR MX1_SSI_BASE_ADDR
+#define SPI2_BASE_ADDR MX1_SPI2_BASE_ADDR
+#define MSHC_BASE_ADDR MX1_MSHC_BASE_ADDR
+#define CCM_BASE_ADDR MX1_CCM_BASE_ADDR
+#define SCM_BASE_ADDR MX1_SCM_BASE_ADDR
+#define GPIO_BASE_ADDR MX1_GPIO_BASE_ADDR
+#define EIM_BASE_ADDR MX1_EIM_BASE_ADDR
+#define SDRAMC_BASE_ADDR MX1_SDRAMC_BASE_ADDR
+#define MMA_BASE_ADDR MX1_MMA_BASE_ADDR
+#define AVIC_BASE_ADDR MX1_AVIC_BASE_ADDR
+#define CSI_BASE_ADDR MX1_CSI_BASE_ADDR
+#define IO_ADDRESS(x) MX1_IO_ADDRESS(x)
+#define AVIC_IO_ADDRESS(x) IO_ADDRESS(x)
+#define INT_SOFTINT MX1_INT_SOFTINT
+#define CSI_INT MX1_CSI_INT
+#define DSPA_MAC_INT MX1_DSPA_MAC_INT
+#define DSPA_INT MX1_DSPA_INT
+#define COMP_INT MX1_COMP_INT
+#define MSHC_XINT MX1_MSHC_XINT
+#define GPIO_INT_PORTA MX1_GPIO_INT_PORTA
+#define GPIO_INT_PORTB MX1_GPIO_INT_PORTB
+#define GPIO_INT_PORTC MX1_GPIO_INT_PORTC
+#define LCDC_INT MX1_LCDC_INT
+#define SIM_INT MX1_SIM_INT
+#define SIM_DATA_INT MX1_SIM_DATA_INT
+#define RTC_INT MX1_RTC_INT
+#define RTC_SAMINT MX1_RTC_SAMINT
+#define UART2_MINT_PFERR MX1_UART2_MINT_PFERR
+#define UART2_MINT_RTS MX1_UART2_MINT_RTS
+#define UART2_MINT_DTR MX1_UART2_MINT_DTR
+#define UART2_MINT_UARTC MX1_UART2_MINT_UARTC
+#define UART2_MINT_TX MX1_UART2_MINT_TX
+#define UART2_MINT_RX MX1_UART2_MINT_RX
+#define UART1_MINT_PFERR MX1_UART1_MINT_PFERR
+#define UART1_MINT_RTS MX1_UART1_MINT_RTS
+#define UART1_MINT_DTR MX1_UART1_MINT_DTR
+#define UART1_MINT_UARTC MX1_UART1_MINT_UARTC
+#define UART1_MINT_TX MX1_UART1_MINT_TX
+#define UART1_MINT_RX MX1_UART1_MINT_RX
+#define VOICE_DAC_INT MX1_VOICE_DAC_INT
+#define VOICE_ADC_INT MX1_VOICE_ADC_INT
+#define PEN_DATA_INT MX1_PEN_DATA_INT
+#define PWM_INT MX1_PWM_INT
+#define SDHC_INT MX1_SDHC_INT
+#define I2C_INT MX1_I2C_INT
+#define CSPI_INT MX1_CSPI_INT
+#define SSI_TX_INT MX1_SSI_TX_INT
+#define SSI_TX_ERR_INT MX1_SSI_TX_ERR_INT
+#define SSI_RX_INT MX1_SSI_RX_INT
+#define SSI_RX_ERR_INT MX1_SSI_RX_ERR_INT
+#define TOUCH_INT MX1_TOUCH_INT
+#define USBD_INT1 MX1_USBD_INT1
+#define USBD_INT2 MX1_USBD_INT2
+#define USBD_INT3 MX1_USBD_INT3
+#define USBD_INT4 MX1_USBD_INT4
+#define USBD_INT5 MX1_USBD_INT5
+#define USBD_INT6 MX1_USBD_INT6
+#define BTSYS_INT MX1_BTSYS_INT
+#define BTTIM_INT MX1_BTTIM_INT
+#define BTWUI_INT MX1_BTWUI_INT
+#define TIM2_INT MX1_TIM2_INT
+#define TIM1_INT MX1_TIM1_INT
+#define DMA_ERR MX1_DMA_ERR
+#define DMA_INT MX1_DMA_INT
+#define GPIO_INT_PORTD MX1_GPIO_INT_PORTD
+#define WDT_INT MX1_WDT_INT
+#define DMA_REQ_UART3_T MX1_DMA_REQ_UART3_T
+#define DMA_REQ_UART3_R MX1_DMA_REQ_UART3_R
+#define DMA_REQ_SSI2_T MX1_DMA_REQ_SSI2_T
+#define DMA_REQ_SSI2_R MX1_DMA_REQ_SSI2_R
+#define DMA_REQ_CSI_STAT MX1_DMA_REQ_CSI_STAT
+#define DMA_REQ_CSI_R MX1_DMA_REQ_CSI_R
+#define DMA_REQ_MSHC MX1_DMA_REQ_MSHC
+#define DMA_REQ_DSPA_DCT_DOUT MX1_DMA_REQ_DSPA_DCT_DOUT
+#define DMA_REQ_DSPA_DCT_DIN MX1_DMA_REQ_DSPA_DCT_DIN
+#define DMA_REQ_DSPA_MAC MX1_DMA_REQ_DSPA_MAC
+#define DMA_REQ_EXT MX1_DMA_REQ_EXT
+#define DMA_REQ_SDHC MX1_DMA_REQ_SDHC
+#define DMA_REQ_SPI1_R MX1_DMA_REQ_SPI1_R
+#define DMA_REQ_SPI1_T MX1_DMA_REQ_SPI1_T
+#define DMA_REQ_SSI_T MX1_DMA_REQ_SSI_T
+#define DMA_REQ_SSI_R MX1_DMA_REQ_SSI_R
+#define DMA_REQ_ASP_DAC MX1_DMA_REQ_ASP_DAC
+#define DMA_REQ_ASP_ADC MX1_DMA_REQ_ASP_ADC
+#define DMA_REQ_USP_EP(x) MX1_DMA_REQ_USP_EP(x)
+#define DMA_REQ_SPI2_R MX1_DMA_REQ_SPI2_R
+#define DMA_REQ_SPI2_T MX1_DMA_REQ_SPI2_T
+#define DMA_REQ_UART2_T MX1_DMA_REQ_UART2_T
+#define DMA_REQ_UART2_R MX1_DMA_REQ_UART2_R
+#define DMA_REQ_UART1_T MX1_DMA_REQ_UART1_T
+#define DMA_REQ_UART1_R MX1_DMA_REQ_UART1_R
+#endif /* ifdef IMX_NEEDS_DEPRECATED_SYMBOLS */
+
+#endif /* ifndef __MACH_MX1_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/plat-mxc/include/mach/mx21.h
index bb297d8765a7..ed98b9c9f389 100644
--- a/arch/arm/plat-mxc/include/mach/mx21.h
+++ b/arch/arm/plat-mxc/include/mach/mx21.h
@@ -22,8 +22,8 @@
  * MA  02110-1301, USA.
  */
 
-#ifndef __ASM_ARCH_MXC_MX21_H__
-#define __ASM_ARCH_MXC_MX21_H__
+#ifndef __MACH_MX21_H__
+#define __MACH_MX21_H__
 
 #define MX21_AIPI_BASE_ADDR		0x10000000
 #define MX21_AIPI_BASE_ADDR_VIRT	0xf4000000
@@ -92,6 +92,11 @@
 
 #define MX21_IRAM_BASE_ADDR		0xffffe800	/* internal ram */
 
+#define MX21_IO_ADDRESS(x) (						\
+	IMX_IO_ADDRESS(x, MX21_AIPI) ?:					\
+	IMX_IO_ADDRESS(x, MX21_SAHB1) ?:				\
+	IMX_IO_ADDRESS(x, MX21_X_MEMC))
+
 /* fixed interrupt numbers */
 #define MX21_INT_CSPI3		6
 #define MX21_INT_GPIO		8
@@ -179,6 +184,7 @@
 #define MX21_DMA_REQ_CSI_STAT	30
 #define MX21_DMA_REQ_CSI_RX	31
 
+#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
 /* these should go away */
 #define SDRAM_BASE_ADDR MX21_SDRAM_BASE_ADDR
 #define CSD1_BASE_ADDR MX21_CSD1_BASE_ADDR
@@ -211,5 +217,6 @@
 #define DMA_REQ_FIRI_RX MX21_DMA_REQ_FIRI_RX
 #define DMA_REQ_BMI_TX MX21_DMA_REQ_BMI_TX
 #define DMA_REQ_BMI_RX MX21_DMA_REQ_BMI_RX
+#endif
 
-#endif /* __ASM_ARCH_MXC_MX21_H__ */
+#endif /* ifndef __MACH_MX21_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h
index 854e2dc58481..4eb6e334bda5 100644
--- a/arch/arm/plat-mxc/include/mach/mx25.h
+++ b/arch/arm/plat-mxc/include/mach/mx25.h
@@ -22,27 +22,27 @@
 #define MX25_GPIO3_BASE_ADDR_VIRT	(MX25_AIPS2_BASE_ADDR_VIRT + 0xa4000)
 #define MX25_GPIO4_BASE_ADDR_VIRT	(MX25_AIPS2_BASE_ADDR_VIRT + 0x9c000)
 
-#define MX25_AIPS1_IO_ADDRESS(x)  \
-	(((x) - MX25_AIPS1_BASE_ADDR) + MX25_AIPS1_BASE_ADDR_VIRT)
-#define MX25_AIPS2_IO_ADDRESS(x)  \
-	(((x) - MX25_AIPS2_BASE_ADDR) + MX25_AIPS2_BASE_ADDR_VIRT)
-#define MX25_AVIC_IO_ADDRESS(x)  \
-	(((x) - MX25_AVIC_BASE_ADDR) + MX25_AVIC_BASE_ADDR_VIRT)
+#define MX25_IO_ADDRESS(x) (					\
+	IMX_IO_ADDRESS(x, MX25_AIPS1) ?:			\
+	IMX_IO_ADDRESS(x, MX25_AIPS2) ?:			\
+	IMX_IO_ADDRESS(x, MX25_AVIC))
 
-#define __in_range(addr, name)	((addr) >= name##_BASE_ADDR && (addr) < name##_BASE_ADDR + name##_SIZE)
-
-#define MX25_IO_ADDRESS(x)					\
-	(void __force __iomem *)				\
-	(__in_range(x, MX25_AIPS1) ? MX25_AIPS1_IO_ADDRESS(x) :	\
-	__in_range(x, MX25_AIPS2) ? MX25_AIPS2_IO_ADDRESS(x) :	\
-	__in_range(x, MX25_AVIC) ? MX25_AVIC_IO_ADDRESS(x) :	\
-	0xDEADBEEF)
-
-#define UART1_BASE_ADDR			0x43f90000
-#define UART2_BASE_ADDR			0x43f94000
+#define MX25_UART1_BASE_ADDR		0x43f90000
+#define MX25_UART2_BASE_ADDR		0x43f94000
 
 #define MX25_FEC_BASE_ADDR		0x50038000
+#define MX25_NFC_BASE_ADDR		0xbb000000
+#define MX25_DRYICE_BASE_ADDR		0x53ffc000
+#define MX25_LCDC_BASE_ADDR		0x53fbc000
 
+#define MX25_INT_DRYICE	25
 #define MX25_INT_FEC	57
+#define MX25_INT_NANDFC	33
+#define MX25_INT_LCDC	39
+
+#if defined(IMX_NEEDS_DEPRECATED_SYMBOLS)
+#define UART1_BASE_ADDR			MX25_UART1_BASE_ADDR
+#define UART2_BASE_ADDR			MX25_UART2_BASE_ADDR
+#endif
 
-#endif /* __MACH_MX25_H__ */
+#endif /* ifndef __MACH_MX25_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
index e2ae19f51710..bae9cd75beee 100644
--- a/arch/arm/plat-mxc/include/mach/mx27.h
+++ b/arch/arm/plat-mxc/include/mach/mx27.h
@@ -21,8 +21,12 @@
  * MA  02110-1301, USA.
  */
 
-#ifndef __ASM_ARCH_MXC_MX27_H__
-#define __ASM_ARCH_MXC_MX27_H__
+#ifndef __MACH_MX27_H__
+#define __MACH_MX27_H__
+
+#ifndef __ASSEMBLER__
+#include <linux/io.h>
+#endif
 
 #define MX27_AIPI_BASE_ADDR		0x10000000
 #define MX27_AIPI_BASE_ADDR_VIRT	0xf4000000
@@ -109,11 +113,31 @@
 #define MX27_M3IF_BASE_ADDR			(MX27_X_MEMC_BASE_ADDR + 0x3000)
 #define MX27_PCMCIA_CTL_BASE_ADDR		(MX27_X_MEMC_BASE_ADDR + 0x4000)
 
+#define MX27_WEIM_CSCRx_BASE_ADDR(cs)	(MX27_WEIM_BASE_ADDR + (cs) * 0x10)
+#define MX27_WEIM_CSCRxU(cs)			(MX27_WEIM_CSCRx_BASE_ADDR(cs))
+#define MX27_WEIM_CSCRxL(cs)			(MX27_WEIM_CSCRx_BASE_ADDR(cs) + 0x4)
+#define MX27_WEIM_CSCRxA(cs)			(MX27_WEIM_CSCRx_BASE_ADDR(cs) + 0x8)
+
 #define MX27_PCMCIA_MEM_BASE_ADDR	0xdc000000
 
 /* IRAM */
 #define MX27_IRAM_BASE_ADDR		0xffff4c00	/* internal ram */
 
+#define MX27_IO_ADDRESS(x) (						\
+	IMX_IO_ADDRESS(x, MX27_AIPI) ?:					\
+	IMX_IO_ADDRESS(x, MX27_SAHB1) ?:				\
+	IMX_IO_ADDRESS(x, MX27_X_MEMC))
+
+#ifndef __ASSEMBLER__
+static inline void mx27_setup_weimcs(size_t cs,
+		unsigned upper, unsigned lower, unsigned addional)
+{
+	__raw_writel(upper, MX27_IO_ADDRESS(MX27_WEIM_CSCRxU(cs)));
+	__raw_writel(lower, MX27_IO_ADDRESS(MX27_WEIM_CSCRxL(cs)));
+	__raw_writel(addional, MX27_IO_ADDRESS(MX27_WEIM_CSCRxA(cs)));
+}
+#endif
+
 /* fixed interrupt numbers */
 #define MX27_INT_I2C2		1
 #define MX27_INT_GPT6		2
@@ -225,6 +249,7 @@
 extern int mx27_revision(void);
 #endif
 
+#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
 /* these should go away */
 #define MSHC_BASE_ADDR MX27_MSHC_BASE_ADDR
 #define GPT5_BASE_ADDR MX27_GPT5_BASE_ADDR
@@ -292,5 +317,6 @@ extern int mx27_revision(void);
 #define DMA_REQ_UART6_RX MX27_DMA_REQ_UART6_RX
 #define DMA_REQ_SDHC3 MX27_DMA_REQ_SDHC3
 #define DMA_REQ_NFC MX27_DMA_REQ_NFC
+#endif
 
-#endif /* __ASM_ARCH_MXC_MX27_H__ */
+#endif /* ifndef __MACH_MX27_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx2x.h b/arch/arm/plat-mxc/include/mach/mx2x.h
index f2eaf140ed02..afb895a0b5b8 100644
--- a/arch/arm/plat-mxc/include/mach/mx2x.h
+++ b/arch/arm/plat-mxc/include/mach/mx2x.h
@@ -20,8 +20,8 @@
  * MA  02110-1301, USA.
  */
 
-#ifndef __ASM_ARCH_MXC_MX2x_H__
-#define __ASM_ARCH_MXC_MX2x_H__
+#ifndef __MACH_MX2x_H__
+#define __MACH_MX2x_H__
 
 /* The following addresses are common between i.MX21 and i.MX27 */
 
@@ -176,6 +176,7 @@
 #define MX2x_DMA_REQ_CSI_STAT	30
 #define MX2x_DMA_REQ_CSI_RX	31
 
+#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
 /* these should go away */
 #define AIPI_BASE_ADDR MX2x_AIPI_BASE_ADDR
 #define AIPI_BASE_ADDR_VIRT MX2x_AIPI_BASE_ADDR_VIRT
@@ -287,5 +288,6 @@
 #define DMA_REQ_UART1_TX MX2x_DMA_REQ_UART1_TX
 #define DMA_REQ_CSI_STAT MX2x_DMA_REQ_CSI_STAT
 #define DMA_REQ_CSI_RX MX2x_DMA_REQ_CSI_RX
+#endif
 
-#endif /* __ASM_ARCH_MXC_MX2x_H__ */
+#endif /* ifndef __MACH_MX2x_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h
index b8b47d139eb5..fb90e119c2b5 100644
--- a/arch/arm/plat-mxc/include/mach/mx31.h
+++ b/arch/arm/plat-mxc/include/mach/mx31.h
@@ -1,3 +1,10 @@
+#ifndef __MACH_MX31_H__
+#define __MACH_MX31_H__
+
+#ifndef __ASSEMBLER__
+#include <linux/io.h>
+#endif
+
 /*
  * IRAM
  */
@@ -107,8 +114,30 @@
 #define MX31_EMI_CTL_BASE_ADDR			(MX31_X_MEMC_BASE_ADDR + 0x4000)
 #define MX31_PCMCIA_CTL_BASE_ADDR		MX31_EMI_CTL_BASE_ADDR
 
+#define MX31_WEIM_CSCRx_BASE_ADDR(cs)	(MX31_WEIM_BASE_ADDR + (cs) * 0x10)
+#define MX31_WEIM_CSCRxU(cs)			(MX31_WEIM_CSCRx_BASE_ADDR(cs))
+#define MX31_WEIM_CSCRxL(cs)			(MX31_WEIM_CSCRx_BASE_ADDR(cs) + 0x4)
+#define MX31_WEIM_CSCRxA(cs)			(MX31_WEIM_CSCRx_BASE_ADDR(cs) + 0x8)
+
 #define MX31_PCMCIA_MEM_BASE_ADDR	0xbc000000
 
+#define MX31_IO_ADDRESS(x) (						\
+	IMX_IO_ADDRESS(x, MX31_AIPS1) ?:				\
+	IMX_IO_ADDRESS(x, MX31_AIPS2) ?:				\
+	IMX_IO_ADDRESS(x, MX31_AVIC) ?:					\
+	IMX_IO_ADDRESS(x, MX31_X_MEMC) ?:				\
+	IMX_IO_ADDRESS(x, MX31_SPBA0))
+
+#ifndef __ASSEMBLER__
+static inline void mx31_setup_weimcs(size_t cs,
+		unsigned upper, unsigned lower, unsigned addional)
+{
+	__raw_writel(upper, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(cs)));
+	__raw_writel(lower, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(cs)));
+	__raw_writel(addional, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(cs)));
+}
+#endif
+
 #define MX31_INT_I2C3		3
 #define MX31_INT_I2C2		4
 #define MX31_INT_MPEG4_ENCODER	5
@@ -186,6 +215,7 @@
 #define MX31_SYSTEM_REV_MIN		MX31_CHIP_REV_1_0
 #define MX31_SYSTEM_REV_NUM		3
 
+#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
 /* these should go away */
 #define ATA_BASE_ADDR MX31_ATA_BASE_ADDR
 #define UART4_BASE_ADDR MX31_UART4_BASE_ADDR
@@ -216,3 +246,6 @@
 #define MXC_INT_UART5 MX31_INT_UART5
 #define MXC_INT_CCM MX31_INT_CCM
 #define MXC_INT_PCMCIA MX31_INT_PCMCIA
+#endif
+
+#endif /* ifndef __MACH_MX31_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h
index af871bce35b6..526a55842ae5 100644
--- a/arch/arm/plat-mxc/include/mach/mx35.h
+++ b/arch/arm/plat-mxc/include/mach/mx35.h
@@ -1,3 +1,5 @@
+#ifndef __MACH_MX35_H__
+#define __MACH_MX35_H__
 /*
  * IRAM
  */
@@ -104,6 +106,13 @@
 #define MX35_NFC_BASE_ADDR		0xbb000000
 #define MX35_PCMCIA_MEM_BASE_ADDR	0xbc000000
 
+#define MX35_IO_ADDRESS(x) (						\
+	IMX_IO_ADDRESS(x, MX35_AIPS1) ?:				\
+	IMX_IO_ADDRESS(x, MX35_AIPS2) ?:				\
+	IMX_IO_ADDRESS(x, MX35_AVIC) ?:					\
+	IMX_IO_ADDRESS(x, MX35_X_MEMC) ?:				\
+	IMX_IO_ADDRESS(x, MX35_SPBA0))
+
 /*
  * Interrupt numbers
  */
@@ -180,6 +189,7 @@
 #define MX35_SYSTEM_REV_MIN		MX35_CHIP_REV_1_0
 #define MX35_SYSTEM_REV_NUM		3
 
+#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
 /* these should go away */
 #define MXC_FEC_BASE_ADDR MX35_FEC_BASE_ADDR
 #define MXC_INT_OWIRE MX35_INT_OWIRE
@@ -195,3 +205,6 @@
 #define MXC_INT_MLB MX35_INT_MLB
 #define MXC_INT_SPDIF MX35_INT_SPDIF
 #define MXC_INT_FEC MX35_INT_FEC
+#endif
+
+#endif /* ifndef __MACH_MX35_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h
index be69272407ad..7a356de385f5 100644
--- a/arch/arm/plat-mxc/include/mach/mx3x.h
+++ b/arch/arm/plat-mxc/include/mach/mx3x.h
@@ -8,8 +8,8 @@
  * published by the Free Software Foundation.
  */
 
-#ifndef __ASM_ARCH_MXC_MX31_H__
-#define __ASM_ARCH_MXC_MX31_H__
+#ifndef __MACH_MX3x_H__
+#define __MACH_MX3x_H__
 
 /*
  * MX31 memory map:
@@ -269,6 +269,7 @@ static inline int mx31_revision(void)
 }
 #endif
 
+#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
 /* these should go away */
 #define L2CC_BASE_ADDR MX3x_L2CC_BASE_ADDR
 #define L2CC_SIZE MX3x_L2CC_SIZE
@@ -401,5 +402,6 @@ static inline int mx31_revision(void)
 #define CHIP_REV_3_2 MX3x_CHIP_REV_3_2
 #define SYSTEM_REV_MIN MX3x_SYSTEM_REV_MIN
 #define SYSTEM_REV_NUM MX3x_SYSTEM_REV_NUM
+#endif
 
-#endif /*  __ASM_ARCH_MXC_MX31_H__ */
+#endif /* ifndef __MACH_MX3x_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx51.h b/arch/arm/plat-mxc/include/mach/mx51.h
new file mode 100644
index 000000000000..771532b6b4a6
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx51.h
@@ -0,0 +1,454 @@
+#ifndef __ASM_ARCH_MXC_MX51_H__
+#define __ASM_ARCH_MXC_MX51_H__
+
+/*
+ * MX51 memory map:
+ *
+ *
+ * Virt		Phys		Size	What
+ * ---------------------------------------------------------------------------
+ * FA3E0000	1FFE0000	128K	IRAM (SCCv2 RAM)
+ *         	30000000	256M	GPU
+ *         	40000000	512M	IPU
+ * FA200000	60000000	1M	DEBUG
+ * FB100000	70000000	1M	SPBA 0
+ * FB000000	73F00000	1M	AIPS 1
+ * FB200000	83F00000	1M	AIPS 2
+ * FA100000	8FFFC000	16K	TZIC (interrupt controller)
+ *         	90000000	256M	CSD0 SDRAM/DDR
+ *         	A0000000	256M	CSD1 SDRAM/DDR
+ *         	B0000000	128M	CS0 Flash
+ *         	B8000000	128M	CS1 Flash
+ *         	C0000000	128M	CS2 Flash
+ *         	C8000000	64M	CS3 Flash
+ *         	CC000000	32M	CS4 SRAM
+ *         	CE000000	32M	CS5 SRAM
+ * F9000000	CFFF0000	64K	NFC (NAND Flash AXI)
+ *
+ */
+
+/*
+ * IRAM
+ */
+#define MX51_IRAM_BASE_ADDR		0x1FFE0000	/* internal ram */
+#define MX51_IRAM_BASE_ADDR_VIRT	0xFA3E0000
+#define MX51_IRAM_PARTITIONS		16
+#define MX51_IRAM_PARTITIONS_TO1	12
+#define MX51_IRAM_SIZE		(MX51_IRAM_PARTITIONS * SZ_8K)	/* 128KB */
+
+/*
+ * NFC
+ */
+#define MX51_NFC_AXI_BASE_ADDR		0xCFFF0000	/* NAND flash AXI */
+#define MX51_NFC_AXI_BASE_ADDR_VIRT	0xF9000000
+#define MX51_NFC_AXI_SIZE		SZ_64K
+
+/*
+ * Graphics Memory of GPU
+ */
+#define MX51_GPU_BASE_ADDR		0x20000000
+#define MX51_GPU2D_BASE_ADDR		0xD0000000
+
+#define MX51_TZIC_BASE_ADDR		0x8FFFC000
+#define MX51_TZIC_BASE_ADDR_VIRT	0xFA100000
+#define MX51_TZIC_SIZE			SZ_16K
+
+#define MX51_DEBUG_BASE_ADDR		0x60000000
+#define MX51_DEBUG_BASE_ADDR_VIRT	0xFA200000
+#define MX51_DEBUG_SIZE			SZ_1M
+#define MX51_ETB_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x00001000)
+#define MX51_ETM_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x00002000)
+#define MX51_TPIU_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x00003000)
+#define MX51_CTI0_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x00004000)
+#define MX51_CTI1_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x00005000)
+#define MX51_CTI2_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x00006000)
+#define MX51_CTI3_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x00007000)
+#define MX51_CORTEX_DBG_BASE_ADDR	(MX51_DEBUG_BASE_ADDR + 0x00008000)
+
+/*
+ * SPBA global module enabled #0
+ */
+#define MX51_SPBA0_BASE_ADDR 		0x70000000
+#define MX51_SPBA0_BASE_ADDR_VIRT	0xFB100000
+#define MX51_SPBA0_SIZE			SZ_1M
+
+#define MX51_MMC_SDHC1_BASE_ADDR	(MX51_SPBA0_BASE_ADDR + 0x00004000)
+#define MX51_MMC_SDHC2_BASE_ADDR	(MX51_SPBA0_BASE_ADDR + 0x00008000)
+#define MX51_UART3_BASE_ADDR 		(MX51_SPBA0_BASE_ADDR + 0x0000C000)
+#define MX51_CSPI1_BASE_ADDR 		(MX51_SPBA0_BASE_ADDR + 0x00010000)
+#define MX51_SSI2_BASE_ADDR		(MX51_SPBA0_BASE_ADDR + 0x00014000)
+#define MX51_MMC_SDHC3_BASE_ADDR	(MX51_SPBA0_BASE_ADDR + 0x00020000)
+#define MX51_MMC_SDHC4_BASE_ADDR	(MX51_SPBA0_BASE_ADDR + 0x00024000)
+#define MX51_SPDIF_BASE_ADDR		(MX51_SPBA0_BASE_ADDR + 0x00028000)
+#define MX51_ATA_DMA_BASE_ADDR		(MX51_SPBA0_BASE_ADDR + 0x00030000)
+#define MX51_SLIM_DMA_BASE_ADDR		(MX51_SPBA0_BASE_ADDR + 0x00034000)
+#define MX51_HSI2C_DMA_BASE_ADDR	(MX51_SPBA0_BASE_ADDR + 0x00038000)
+#define MX51_SPBA_CTRL_BASE_ADDR	(MX51_SPBA0_BASE_ADDR + 0x0003C000)
+
+/*
+ * defines for SPBA modules
+ */
+#define MX51_SPBA_SDHC1	0x04
+#define MX51_SPBA_SDHC2	0x08
+#define MX51_SPBA_UART3	0x0C
+#define MX51_SPBA_CSPI1	0x10
+#define MX51_SPBA_SSI2	0x14
+#define MX51_SPBA_SDHC3	0x20
+#define MX51_SPBA_SDHC4	0x24
+#define MX51_SPBA_SPDIF	0x28
+#define MX51_SPBA_ATA	0x30
+#define MX51_SPBA_SLIM	0x34
+#define MX51_SPBA_HSI2C	0x38
+#define MX51_SPBA_CTRL	0x3C
+
+/*
+ * AIPS 1
+ */
+#define MX51_AIPS1_BASE_ADDR 	0x73F00000
+#define MX51_AIPS1_BASE_ADDR_VIRT	0xFB000000
+#define MX51_AIPS1_SIZE		SZ_1M
+
+#define MX51_OTG_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x00080000)
+#define MX51_GPIO1_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x00084000)
+#define MX51_GPIO2_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x00088000)
+#define MX51_GPIO3_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x0008C000)
+#define MX51_GPIO4_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x00090000)
+#define MX51_KPP_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x00094000)
+#define MX51_WDOG_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x00098000)
+#define MX51_WDOG2_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x0009C000)
+#define MX51_GPT1_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000A0000)
+#define MX51_SRTC_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000A4000)
+#define MX51_IOMUXC_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000A8000)
+#define MX51_EPIT1_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000AC000)
+#define MX51_EPIT2_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000B0000)
+#define MX51_PWM1_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000B4000)
+#define MX51_PWM2_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000B8000)
+#define MX51_UART1_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000BC000)
+#define MX51_UART2_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000C0000)
+#define MX51_SRC_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000D0000)
+#define MX51_CCM_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000D4000)
+#define MX51_GPC_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000D8000)
+
+/*
+ * Defines for modules using static and dynamic DMA channels
+ */
+#define MX51_MXC_DMA_CHANNEL_IRAM	30
+#define MX51_MXC_DMA_CHANNEL_SPDIF_TX	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_UART1_RX	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_UART1_TX	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_UART2_RX	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_UART2_TX	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_UART3_RX	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_UART3_TX	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_MMC1	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_MMC2	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_SSI1_RX	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_SSI1_TX	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_SSI2_RX	MXC_DMA_DYNAMIC_CHANNEL
+#ifdef CONFIG_SDMA_IRAM
+#define MX51_MXC_DMA_CHANNEL_SSI2_TX	(MX51_MXC_DMA_CHANNEL_IRAM + 1)
+#else				/*CONFIG_SDMA_IRAM */
+#define MX51_MXC_DMA_CHANNEL_SSI2_TX	MXC_DMA_DYNAMIC_CHANNEL
+#endif				/*CONFIG_SDMA_IRAM */
+#define MX51_MXC_DMA_CHANNEL_CSPI1_RX	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_CSPI1_TX	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_CSPI2_RX	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_CSPI2_TX	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_CSPI3_RX	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_CSPI3_TX	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_ATA_RX	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_ATA_TX	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_MEMORY	MXC_DMA_DYNAMIC_CHANNEL
+
+/*
+ * AIPS 2
+ */
+#define MX51_AIPS2_BASE_ADDR		0x83F00000
+#define MX51_AIPS2_BASE_ADDR_VIRT	0xFB200000
+#define MX51_AIPS2_SIZE			SZ_1M
+
+#define MX51_PLL1_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x00080000)
+#define MX51_PLL2_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x00084000)
+#define MX51_PLL3_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x00088000)
+#define MX51_AHBMAX_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x00094000)
+#define MX51_IIM_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x00098000)
+#define MX51_CSU_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x0009C000)
+#define MX51_ARM_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000A0000)
+#define MX51_OWIRE_BASE_ADDR 	(MX51_AIPS2_BASE_ADDR + 0x000A4000)
+#define MX51_FIRI_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000A8000)
+#define MX51_CSPI2_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000AC000)
+#define MX51_SDMA_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000B0000)
+#define MX51_SCC_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000B4000)
+#define MX51_ROMCP_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000B8000)
+#define MX51_RTIC_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000BC000)
+#define MX51_CSPI3_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000C0000)
+#define MX51_I2C2_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000C4000)
+#define MX51_I2C1_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000C8000)
+#define MX51_SSI1_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000CC000)
+#define MX51_AUDMUX_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000D0000)
+#define MX51_M4IF_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000D8000)
+#define MX51_ESDCTL_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000D9000)
+#define MX51_WEIM_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000DA000)
+#define MX51_NFC_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000DB000)
+#define MX51_EMI_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000DBF00)
+#define MX51_MIPI_HSC_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000DC000)
+#define MX51_ATA_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000E0000)
+#define MX51_SIM_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000E4000)
+#define MX51_SSI3BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000E8000)
+#define MX51_MXC_FEC_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000EC000)
+#define MX51_TVE_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000F0000)
+#define MX51_VPU_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000F4000)
+#define MX51_SAHARA_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000F8000)
+
+/*
+ * Memory regions and CS
+ */
+#define MX51_GPU_CTRL_BASE_ADDR		0x30000000
+#define MX51_IPU_CTRL_BASE_ADDR		0x40000000
+#define MX51_CSD0_BASE_ADDR		0x90000000
+#define MX51_CSD1_BASE_ADDR		0xA0000000
+#define MX51_CS0_BASE_ADDR		0xB0000000
+#define MX51_CS1_BASE_ADDR		0xB8000000
+#define MX51_CS2_BASE_ADDR		0xC0000000
+#define MX51_CS3_BASE_ADDR		0xC8000000
+#define MX51_CS4_BASE_ADDR		0xCC000000
+#define MX51_CS5_BASE_ADDR		0xCE000000
+
+/* Does given address belongs to the specified memory region? */
+#define ADDRESS_IN_REGION(addr, start, size)			\
+	(((addr) >= (start)) && ((addr) < (start)+(size)))
+
+/* Does given address belongs to the specified named `module'? */
+#define MX51_IS_MODULE(addr, module)			       \
+	ADDRESS_IN_REGION(addr, MX51_ ## module ## _BASE_ADDR, \
+				MX51_ ## module ## _SIZE)
+/*
+ * This macro defines the physical to virtual address mapping for all the
+ * peripheral modules. It is used by passing in the physical address as x
+ * and returning the virtual address. If the physical address is not mapped,
+ * it returns 0xDEADBEEF
+ */
+
+#define MX51_IO_ADDRESS(x)					\
+	(void __iomem *)					\
+	(MX51_IS_MODULE(x, IRAM) ? MX51_IRAM_IO_ADDRESS(x) :	\
+	MX51_IS_MODULE(x, TZIC) ? MX51_TZIC_IO_ADDRESS(x) :	\
+	MX51_IS_MODULE(x, DEBUG) ? MX51_DEBUG_IO_ADDRESS(x) :	\
+	MX51_IS_MODULE(x, SPBA0) ? MX51_SPBA0_IO_ADDRESS(x) :	\
+	MX51_IS_MODULE(x, AIPS1) ? MX51_AIPS1_IO_ADDRESS(x) :	\
+	MX51_IS_MODULE(x, AIPS2) ? MX51_AIPS2_IO_ADDRESS(x) :	\
+	MX51_IS_MODULE(x, NFC_AXI) ? MX51_NFC_AXI_IO_ADDRESS(x) : \
+	0xDEADBEEF)
+
+/*
+ * define the address mapping macros: in physical address order
+ */
+#define MX51_IRAM_IO_ADDRESS(x)  \
+	(((x) - MX51_IRAM_BASE_ADDR) + MX51_IRAM_BASE_ADDR_VIRT)
+
+#define MX51_TZIC_IO_ADDRESS(x)  \
+	(((x) - MX51_TZIC_BASE_ADDR) + MX51_TZIC_BASE_ADDR_VIRT)
+
+#define MX51_DEBUG_IO_ADDRESS(x)  \
+	(((x) - MX51_DEBUG_BASE_ADDR) + MX51_DEBUG_BASE_ADDR_VIRT)
+
+#define MX51_SPBA0_IO_ADDRESS(x)  \
+	(((x) - MX51_SPBA0_BASE_ADDR) + MX51_SPBA0_BASE_ADDR_VIRT)
+
+#define MX51_AIPS1_IO_ADDRESS(x)  \
+	(((x) - MX51_AIPS1_BASE_ADDR) + MX51_AIPS1_BASE_ADDR_VIRT)
+
+#define MX51_AIPS2_IO_ADDRESS(x)  \
+	(((x) - MX51_AIPS2_BASE_ADDR) + MX51_AIPS2_BASE_ADDR_VIRT)
+
+#define MX51_NFC_AXI_IO_ADDRESS(x) \
+	(((x) - MX51_NFC_AXI_BASE_ADDR) + MX51_NFC_AXI_BASE_ADDR_VIRT)
+
+#define MX51_IS_MEM_DEVICE_NONSHARED(x)		0
+
+/*
+ * DMA request assignments
+ */
+#define MX51_DMA_REQ_SSI3_TX1	47
+#define MX51_DMA_REQ_SSI3_RX1	46
+#define MX51_DMA_REQ_SPDIF	45
+#define MX51_DMA_REQ_UART3_TX	44
+#define MX51_DMA_REQ_UART3_RX	43
+#define MX51_DMA_REQ_SLIM_B_TX	42
+#define MX51_DMA_REQ_SDHC4	41
+#define MX51_DMA_REQ_SDHC3	40
+#define MX51_DMA_REQ_CSPI_TX	39
+#define MX51_DMA_REQ_CSPI_RX	38
+#define MX51_DMA_REQ_SSI3_TX2	37
+#define MX51_DMA_REQ_IPU	36
+#define MX51_DMA_REQ_SSI3_RX2	35
+#define MX51_DMA_REQ_EPIT2	34
+#define MX51_DMA_REQ_CTI2_1	33
+#define MX51_DMA_REQ_EMI_WR	32
+#define MX51_DMA_REQ_CTI2_0	31
+#define MX51_DMA_REQ_EMI_RD	30
+#define MX51_DMA_REQ_SSI1_TX1	29
+#define MX51_DMA_REQ_SSI1_RX1	28
+#define MX51_DMA_REQ_SSI1_TX2	27
+#define MX51_DMA_REQ_SSI1_RX2	26
+#define MX51_DMA_REQ_SSI2_TX1	25
+#define MX51_DMA_REQ_SSI2_RX1	24
+#define MX51_DMA_REQ_SSI2_TX2	23
+#define MX51_DMA_REQ_SSI2_RX2	22
+#define MX51_DMA_REQ_SDHC2	21
+#define MX51_DMA_REQ_SDHC1	20
+#define MX51_DMA_REQ_UART1_TX	19
+#define MX51_DMA_REQ_UART1_RX	18
+#define MX51_DMA_REQ_UART2_TX	17
+#define MX51_DMA_REQ_UART2_RX	16
+#define MX51_DMA_REQ_GPU	15
+#define MX51_DMA_REQ_EXTREQ1	14
+#define MX51_DMA_REQ_FIRI_TX	13
+#define MX51_DMA_REQ_FIRI_RX	12
+#define MX51_DMA_REQ_HS_I2C_RX	11
+#define MX51_DMA_REQ_HS_I2C_TX	10
+#define MX51_DMA_REQ_CSPI2_TX	9
+#define MX51_DMA_REQ_CSPI2_RX	8
+#define MX51_DMA_REQ_CSPI1_TX	7
+#define MX51_DMA_REQ_CSPI1_RX	6
+#define MX51_DMA_REQ_SLIM_B	5
+#define MX51_DMA_REQ_ATA_TX_END	4
+#define MX51_DMA_REQ_ATA_TX	3
+#define MX51_DMA_REQ_ATA_RX	2
+#define MX51_DMA_REQ_GPC	1
+#define MX51_DMA_REQ_VPU	0
+
+/*
+ * Interrupt numbers
+ */
+#define MX51_MXC_INT_BASE	0
+#define MX51_MXC_INT_RESV0	0
+#define MX51_MXC_INT_MMC_SDHC1	1
+#define MX51_MXC_INT_MMC_SDHC2	2
+#define MX51_MXC_INT_MMC_SDHC3	3
+#define MX51_MXC_INT_MMC_SDHC4	4
+#define MX51_MXC_INT_RESV5	5
+#define MX51_MXC_INT_SDMA	6
+#define MX51_MXC_INT_IOMUX	7
+#define MX51_MXC_INT_NFC	8
+#define MX51_MXC_INT_VPU	9
+#define MX51_MXC_INT_IPU_ERR	10
+#define MX51_MXC_INT_IPU_SYN	11
+#define MX51_MXC_INT_GPU	12
+#define MX51_MXC_INT_RESV13	13
+#define MX51_MXC_INT_USB_H1	14
+#define MX51_MXC_INT_EMI	15
+#define MX51_MXC_INT_USB_H2	16
+#define MX51_MXC_INT_USB_H3	17
+#define MX51_MXC_INT_USB_OTG	18
+#define MX51_MXC_INT_SAHARA_H0	19
+#define MX51_MXC_INT_SAHARA_H1	20
+#define MX51_MXC_INT_SCC_SMN	21
+#define MX51_MXC_INT_SCC_STZ	22
+#define MX51_MXC_INT_SCC_SCM	23
+#define MX51_MXC_INT_SRTC_NTZ	24
+#define MX51_MXC_INT_SRTC_TZ	25
+#define MX51_MXC_INT_RTIC	26
+#define MX51_MXC_INT_CSU	27
+#define MX51_MXC_INT_SLIM_B	28
+#define MX51_MXC_INT_SSI1	29
+#define MX51_MXC_INT_SSI2	30
+#define MX51_MXC_INT_UART1	31
+#define MX51_MXC_INT_UART2	32
+#define MX51_MXC_INT_UART3	33
+#define MX51_MXC_INT_RESV34	34
+#define MX51_MXC_INT_RESV35	35
+#define MX51_MXC_INT_CSPI1	36
+#define MX51_MXC_INT_CSPI2	37
+#define MX51_MXC_INT_CSPI	38
+#define MX51_MXC_INT_GPT	39
+#define MX51_MXC_INT_EPIT1	40
+#define MX51_MXC_INT_EPIT2	41
+#define MX51_MXC_INT_GPIO1_INT7	42
+#define MX51_MXC_INT_GPIO1_INT6	43
+#define MX51_MXC_INT_GPIO1_INT5	44
+#define MX51_MXC_INT_GPIO1_INT4	45
+#define MX51_MXC_INT_GPIO1_INT3	46
+#define MX51_MXC_INT_GPIO1_INT2	47
+#define MX51_MXC_INT_GPIO1_INT1	48
+#define MX51_MXC_INT_GPIO1_INT0	49
+#define MX51_MXC_INT_GPIO1_LOW	50
+#define MX51_MXC_INT_GPIO1_HIGH	51
+#define MX51_MXC_INT_GPIO2_LOW	52
+#define MX51_MXC_INT_GPIO2_HIGH	53
+#define MX51_MXC_INT_GPIO3_LOW	54
+#define MX51_MXC_INT_GPIO3_HIGH	55
+#define MX51_MXC_INT_GPIO4_LOW	56
+#define MX51_MXC_INT_GPIO4_HIGH	57
+#define MX51_MXC_INT_WDOG1	58
+#define MX51_MXC_INT_WDOG2	59
+#define MX51_MXC_INT_KPP	60
+#define MX51_MXC_INT_PWM1	61
+#define MX51_MXC_INT_I2C1	62
+#define MX51_MXC_INT_I2C2	63
+#define MX51_MXC_INT_HS_I2C	64
+#define MX51_MXC_INT_RESV65	65
+#define MX51_MXC_INT_RESV66	66
+#define MX51_MXC_INT_SIM_IPB	67
+#define MX51_MXC_INT_SIM_DAT	68
+#define MX51_MXC_INT_IIM	69
+#define MX51_MXC_INT_ATA	70
+#define MX51_MXC_INT_CCM1	71
+#define MX51_MXC_INT_CCM2	72
+#define MX51_MXC_INT_GPC1	73
+#define MX51_MXC_INT_GPC2	74
+#define MX51_MXC_INT_SRC	75
+#define MX51_MXC_INT_NM		76
+#define MX51_MXC_INT_PMU	77
+#define MX51_MXC_INT_CTI_IRQ	78
+#define MX51_MXC_INT_CTI1_TG0	79
+#define MX51_MXC_INT_CTI1_TG1	80
+#define MX51_MXC_INT_MCG_ERR	81
+#define MX51_MXC_INT_MCG_TMR	82
+#define MX51_MXC_INT_MCG_FUNC	83
+#define MX51_MXC_INT_GPU2_IRQ	84
+#define MX51_MXC_INT_GPU2_BUSY	85
+#define MX51_MXC_INT_RESV86	86
+#define MX51_MXC_INT_FEC	87
+#define MX51_MXC_INT_OWIRE	88
+#define MX51_MXC_INT_CTI1_TG2	89
+#define MX51_MXC_INT_SJC	90
+#define MX51_MXC_INT_SPDIF	91
+#define MX51_MXC_INT_TVE	92
+#define MX51_MXC_INT_FIRI	93
+#define MX51_MXC_INT_PWM2	94
+#define MX51_MXC_INT_SLIM_EXP	95
+#define MX51_MXC_INT_SSI3	96
+#define MX51_MXC_INT_EMI_BOOT	97
+#define MX51_MXC_INT_CTI1_TG3	98
+#define MX51_MXC_INT_SMC_RX	99
+#define MX51_MXC_INT_VPU_IDLE	100
+#define MX51_MXC_INT_EMI_NFC	101
+#define MX51_MXC_INT_GPU_IDLE	102
+
+/* silicon revisions specific to i.MX51 */
+#define MX51_CHIP_REV_1_0	0x10
+#define MX51_CHIP_REV_1_1	0x11
+#define MX51_CHIP_REV_1_2	0x12
+#define MX51_CHIP_REV_1_3	0x13
+#define MX51_CHIP_REV_2_0	0x20
+#define MX51_CHIP_REV_2_1	0x21
+#define MX51_CHIP_REV_2_2	0x22
+#define MX51_CHIP_REV_2_3	0x23
+#define MX51_CHIP_REV_3_0	0x30
+#define MX51_CHIP_REV_3_1	0x31
+#define MX51_CHIP_REV_3_2	0x32
+
+/* Mandatory defines used globally */
+
+#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
+
+extern unsigned int system_rev;
+
+static inline unsigned int mx51_revision(void)
+{
+	return system_rev;
+}
+#endif
+
+#endif	/*  __ASM_ARCH_MXC_MX51_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
index 51990536b845..a790bf212972 100644
--- a/arch/arm/plat-mxc/include/mach/mxc.h
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
@@ -30,6 +30,7 @@
 #define MXC_CPU_MX27		27
 #define MXC_CPU_MX31		31
 #define MXC_CPU_MX35		35
+#define MXC_CPU_MX51		51
 #define MXC_CPU_MXC91231	91231
 
 #ifndef __ASSEMBLY__
@@ -108,6 +109,18 @@ extern unsigned int __mxc_cpu_type;
 # define cpu_is_mx35()		(0)
 #endif
 
+#ifdef CONFIG_ARCH_MX5
+# ifdef mxc_cpu_type
+#  undef mxc_cpu_type
+#  define mxc_cpu_type __mxc_cpu_type
+# else
+#  define mxc_cpu_type MXC_CPU_MX51
+# endif
+# define cpu_is_mx51()		(mxc_cpu_type == MXC_CPU_MX51)
+#else
+# define cpu_is_mx51()		(0)
+#endif
+
 #ifdef CONFIG_ARCH_MXC91231
 # ifdef mxc_cpu_type
 #  undef mxc_cpu_type
@@ -121,9 +134,10 @@ extern unsigned int __mxc_cpu_type;
 #endif
 
 #if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX2)
-#define CSCR_U(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10)
-#define CSCR_L(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x4)
-#define CSCR_A(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x8)
+/* These are deprecated, use mx[23][157]_setup_weimcs instead. */
+#define CSCR_U(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10))
+#define CSCR_L(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10 + 0x4))
+#define CSCR_A(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10 + 0x8))
 #endif
 
 #define cpu_is_mx3()	(cpu_is_mx31() || cpu_is_mx35() || cpu_is_mxc91231())
diff --git a/arch/arm/plat-mxc/include/mach/mxc91231.h b/arch/arm/plat-mxc/include/mach/mxc91231.h
index 81484d1ef232..5182b986b785 100644
--- a/arch/arm/plat-mxc/include/mach/mxc91231.h
+++ b/arch/arm/plat-mxc/include/mach/mxc91231.h
@@ -184,60 +184,22 @@
 #define MXC91231_CS4_BASE_ADDR		0xB4000000
 #define MXC91231_CS5_BASE_ADDR		0xB6000000
 
-/* Is given address belongs to the specified memory region? */
-#define ADDRESS_IN_REGION(addr, start, size) \
-	(((addr) >= (start)) && ((addr) < (start)+(size)))
-
-/* Is given address belongs to the specified named `module'? */
-#define MXC91231_IS_MODULE(addr, module) \
-	ADDRESS_IN_REGION(addr, MXC91231_ ## module ## _BASE_ADDR, \
-	                        MXC91231_ ## module ## _SIZE)
 /*
  * This macro defines the physical to virtual address mapping for all the
  * peripheral modules. It is used by passing in the physical address as x
  * and returning the virtual address. If the physical address is not mapped,
- * it returns 0xDEADBEEF
- */
-
-#define MXC91231_IO_ADDRESS(x) \
-	(void __iomem *) \
-	(MXC91231_IS_MODULE(x, L2CC) ? MXC91231_L2CC_IO_ADDRESS(x) : \
-	 MXC91231_IS_MODULE(x, AIPS1) ? MXC91231_AIPS1_IO_ADDRESS(x) : \
-	 MXC91231_IS_MODULE(x, AIPS2) ? MXC91231_AIPS2_IO_ADDRESS(x) : \
-	 MXC91231_IS_MODULE(x, SPBA0) ? MXC91231_SPBA0_IO_ADDRESS(x) : \
-	 MXC91231_IS_MODULE(x, SPBA1) ? MXC91231_SPBA1_IO_ADDRESS(x) : \
-	 MXC91231_IS_MODULE(x, ROMP) ? MXC91231_ROMP_IO_ADDRESS(x) : \
-	 MXC91231_IS_MODULE(x, AVIC) ? MXC91231_AVIC_IO_ADDRESS(x) : \
-	 MXC91231_IS_MODULE(x, X_MEMC) ? MXC91231_X_MEMC_IO_ADDRESS(x) : \
-	 0xDEADBEEF)
-
-
-/*
- * define the address mapping macros: in physical address order
+ * it returns 0.
  */
-#define MXC91231_L2CC_IO_ADDRESS(x)  \
-	(((x) - MXC91231_L2CC_BASE_ADDR) + MXC91231_L2CC_BASE_ADDR_VIRT)
-
-#define MXC91231_AIPS1_IO_ADDRESS(x)  \
-	(((x) - MXC91231_AIPS1_BASE_ADDR) + MXC91231_AIPS1_BASE_ADDR_VIRT)
-
-#define MXC91231_SPBA0_IO_ADDRESS(x)  \
-	(((x) - MXC91231_SPBA0_BASE_ADDR) + MXC91231_SPBA0_BASE_ADDR_VIRT)
-
-#define MXC91231_SPBA1_IO_ADDRESS(x)  \
-	(((x) - MXC91231_SPBA1_BASE_ADDR) + MXC91231_SPBA1_BASE_ADDR_VIRT)
-
-#define MXC91231_AIPS2_IO_ADDRESS(x)  \
-	(((x) - MXC91231_AIPS2_BASE_ADDR) + MXC91231_AIPS2_BASE_ADDR_VIRT)
-
-#define MXC91231_ROMP_IO_ADDRESS(x)  \
-	(((x) - MXC91231_ROMP_BASE_ADDR) + MXC91231_ROMP_BASE_ADDR_VIRT)
-
-#define MXC91231_AVIC_IO_ADDRESS(x)  \
-	(((x) - MXC91231_AVIC_BASE_ADDR) + MXC91231_AVIC_BASE_ADDR_VIRT)
 
-#define MXC91231_X_MEMC_IO_ADDRESS(x)  \
-	(((x) - MXC91231_X_MEMC_BASE_ADDR) + MXC91231_X_MEMC_BASE_ADDR_VIRT)
+#define MXC91231_IO_ADDRESS(x) (					\
+	IMX_IO_ADDRESS(x, MXC91231_L2CC) ?:				\
+	IMX_IO_ADDRESS(x, MXC91231_X_MEMC) ?:				\
+	IMX_IO_ADDRESS(x, MXC91231_ROMP) ?:				\
+	IMX_IO_ADDRESS(x, MXC91231_AVIC) ?:				\
+	IMX_IO_ADDRESS(x, MXC91231_AIPS1) ?:				\
+	IMX_IO_ADDRESS(x, MXC91231_SPBA0) ?:				\
+	IMX_IO_ADDRESS(x, MXC91231_SPBA1) ?:				\
+	IMX_IO_ADDRESS(x, MXC91231_AIPS2))
 
 /*
  * Interrupt numbers
diff --git a/arch/arm/plat-mxc/include/mach/mxc_ehci.h b/arch/arm/plat-mxc/include/mach/mxc_ehci.h
index 8f796239393e..4b9b8368c0c0 100644
--- a/arch/arm/plat-mxc/include/mach/mxc_ehci.h
+++ b/arch/arm/plat-mxc/include/mach/mxc_ehci.h
@@ -22,6 +22,10 @@
 #define MXC_EHCI_POWER_PINS_ENABLED	(1 << 5)
 #define MXC_EHCI_TTL_ENABLED		(1 << 6)
 
+#define MXC_EHCI_INTERNAL_PHY		(1 << 7)
+#define MXC_EHCI_IPPUE_DOWN		(1 << 8)
+#define MXC_EHCI_IPPUE_UP		(1 << 9)
+
 struct mxc_usbh_platform_data {
 	int (*init)(struct platform_device *pdev);
 	int (*exit)(struct platform_device *pdev);
diff --git a/arch/arm/plat-mxc/include/mach/ssi.h b/arch/arm/plat-mxc/include/mach/ssi.h
new file mode 100644
index 000000000000..c34ded523f10
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/ssi.h
@@ -0,0 +1,18 @@
+#ifndef __MACH_SSI_H
+#define __MACH_SSI_H
+
+struct snd_ac97;
+
+extern unsigned char imx_ssi_fiq_start, imx_ssi_fiq_end;
+extern unsigned long imx_ssi_fiq_base, imx_ssi_fiq_tx_buffer, imx_ssi_fiq_rx_buffer;
+
+struct imx_ssi_platform_data {
+	unsigned int flags;
+#define IMX_SSI_DMA            (1 << 0)
+#define IMX_SSI_USE_AC97       (1 << 1)
+	void (*ac97_reset) (struct snd_ac97 *ac97);
+	void (*ac97_warm_reset)(struct snd_ac97 *ac97);
+};
+
+#endif /* __MACH_SSI_H */
+
diff --git a/arch/arm/plat-mxc/include/mach/timex.h b/arch/arm/plat-mxc/include/mach/timex.h
index 527a6c24788e..024416ed11cd 100644
--- a/arch/arm/plat-mxc/include/mach/timex.h
+++ b/arch/arm/plat-mxc/include/mach/timex.h
@@ -28,6 +28,8 @@
 #define CLOCK_TICK_RATE		16625000
 #elif defined CONFIG_ARCH_MX25
 #define CLOCK_TICK_RATE		16000000
+#elif defined CONFIG_ARCH_MX5
+#define CLOCK_TICK_RATE		8000000
 #elif defined CONFIG_ARCH_MXC91231
 #define CLOCK_TICK_RATE		13000000
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
index d49384cb1e97..52e476a150ca 100644
--- a/arch/arm/plat-mxc/include/mach/uncompress.h
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -1,8 +1,6 @@
 /*
  *  arch/arm/plat-mxc/include/mach/uncompress.h
  *
- *
- *
  *  Copyright (C) 1999 ARM Limited
  *  Copyright (C) Shane Nay (shane@minirl.com)
  *
@@ -25,7 +23,6 @@
 
 #define __MXC_BOOT_UNCOMPRESS
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 static unsigned long uart_base;
diff --git a/arch/arm/plat-mxc/iomux-mx1-mx2.c b/arch/arm/plat-mxc/iomux-mx1-mx2.c
deleted file mode 100644
index a37163ce280b..000000000000
--- a/arch/arm/plat-mxc/iomux-mx1-mx2.c
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- *  arch/arm/mach-mxc/generic.c
- *
- *  author: Sascha Hauer
- *  Created: april 20th, 2004
- *  Copyright: Synertronixx GmbH
- *
- *  Common code for i.MX machines
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/gpio.h>
-
-#include <mach/hardware.h>
-#include <asm/mach/map.h>
-#include <mach/iomux.h>
-
-void mxc_gpio_mode(int gpio_mode)
-{
-	unsigned int pin = gpio_mode & GPIO_PIN_MASK;
-	unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT;
-	unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT;
-	unsigned int tmp;
-
-	/* Pullup enable */
-	tmp = __raw_readl(VA_GPIO_BASE + MXC_PUEN(port));
-	if (gpio_mode & GPIO_PUEN)
-		tmp |= (1 << pin);
-	else
-		tmp &= ~(1 << pin);
-	__raw_writel(tmp, VA_GPIO_BASE + MXC_PUEN(port));
-
-	/* Data direction */
-	tmp = __raw_readl(VA_GPIO_BASE + MXC_DDIR(port));
-	if (gpio_mode & GPIO_OUT)
-		tmp |= 1 << pin;
-	else
-		tmp &= ~(1 << pin);
-	__raw_writel(tmp, VA_GPIO_BASE + MXC_DDIR(port));
-
-	/* Primary / alternate function */
-	tmp = __raw_readl(VA_GPIO_BASE + MXC_GPR(port));
-	if (gpio_mode & GPIO_AF)
-		tmp |= (1 << pin);
-	else
-		tmp &= ~(1 << pin);
-	__raw_writel(tmp, VA_GPIO_BASE + MXC_GPR(port));
-
-	/* use as gpio? */
-	tmp = __raw_readl(VA_GPIO_BASE + MXC_GIUS(port));
-	if (gpio_mode & (GPIO_PF | GPIO_AF))
-		tmp &= ~(1 << pin);
-	else
-		tmp |= (1 << pin);
-	__raw_writel(tmp, VA_GPIO_BASE + MXC_GIUS(port));
-
-	if (pin < 16) {
-		tmp = __raw_readl(VA_GPIO_BASE + MXC_OCR1(port));
-		tmp &= ~(3 << (pin * 2));
-		tmp |= (ocr << (pin * 2));
-		__raw_writel(tmp, VA_GPIO_BASE + MXC_OCR1(port));
-
-		tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFA1(port));
-		tmp &= ~(3 << (pin * 2));
-		tmp |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << (pin * 2);
-		__raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFA1(port));
-
-		tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFB1(port));
-		tmp &= ~(3 << (pin * 2));
-		tmp |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << (pin * 2);
-		__raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFB1(port));
-	} else {
-		pin -= 16;
-
-		tmp = __raw_readl(VA_GPIO_BASE + MXC_OCR2(port));
-		tmp &= ~(3 << (pin * 2));
-		tmp |= (ocr << (pin * 2));
-		__raw_writel(tmp, VA_GPIO_BASE + MXC_OCR2(port));
-
-		tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFA2(port));
-		tmp &= ~(3 << (pin * 2));
-		tmp |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << (pin * 2);
-		__raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFA2(port));
-
-		tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFB2(port));
-		tmp &= ~(3 << (pin * 2));
-		tmp |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << (pin * 2);
-		__raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFB2(port));
-	}
-}
-EXPORT_SYMBOL(mxc_gpio_mode);
-
-int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
-		const char *label)
-{
-	const int *p = pin_list;
-	int i;
-	unsigned gpio;
-	unsigned mode;
-	int ret = -EINVAL;
-
-	for (i = 0; i < count; i++) {
-		gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK);
-		mode = *p & ~(GPIO_PIN_MASK | GPIO_PORT_MASK);
-
-		if (gpio >= (GPIO_PORT_MAX + 1) * 32)
-			goto setup_error;
-
-		ret = gpio_request(gpio, label);
-		if (ret)
-			goto setup_error;
-
-		mxc_gpio_mode(gpio | mode);
-
-		p++;
-	}
-	return 0;
-
-setup_error:
-	mxc_gpio_release_multiple_pins(pin_list, i);
-	return ret;
-}
-EXPORT_SYMBOL(mxc_gpio_setup_multiple_pins);
-
-void mxc_gpio_release_multiple_pins(const int *pin_list, int count)
-{
-	const int *p = pin_list;
-	int i;
-
-	for (i = 0; i < count; i++) {
-		unsigned gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK);
-		gpio_free(gpio);
-		p++;
-	}
-
-}
-EXPORT_SYMBOL(mxc_gpio_release_multiple_pins);
-
diff --git a/arch/arm/plat-mxc/iomux-v1.c b/arch/arm/plat-mxc/iomux-v1.c
new file mode 100644
index 000000000000..960a02cbcbaf
--- /dev/null
+++ b/arch/arm/plat-mxc/iomux-v1.c
@@ -0,0 +1,238 @@
+/*
+ * arch/arm/plat-mxc/iomux-v1.c
+ *
+ * Copyright (C) 2004 Sascha Hauer, Synertronixx GmbH
+ * Copyright (C) 2009 Uwe Kleine-Koenig, Pengutronix
+ *
+ * Common code for i.MX1, i.MX21 and i.MX27
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <asm/mach/map.h>
+#include <mach/iomux-v1.h>
+
+static void __iomem *imx_iomuxv1_baseaddr;
+static unsigned imx_iomuxv1_numports;
+
+static inline unsigned long imx_iomuxv1_readl(unsigned offset)
+{
+	return __raw_readl(imx_iomuxv1_baseaddr + offset);
+}
+
+static inline void imx_iomuxv1_writel(unsigned long val, unsigned offset)
+{
+	__raw_writel(val, imx_iomuxv1_baseaddr + offset);
+}
+
+static inline void imx_iomuxv1_rmwl(unsigned offset,
+		unsigned long mask, unsigned long value)
+{
+	unsigned long reg = imx_iomuxv1_readl(offset);
+
+	reg &= ~mask;
+	reg |= value;
+
+	imx_iomuxv1_writel(reg, offset);
+}
+
+static inline void imx_iomuxv1_set_puen(
+		unsigned int port, unsigned int pin, int on)
+{
+	unsigned long mask = 1 << pin;
+
+	imx_iomuxv1_rmwl(MXC_PUEN(port), mask, on ? mask : 0);
+}
+
+static inline void imx_iomuxv1_set_ddir(
+		unsigned int port, unsigned int pin, int out)
+{
+	unsigned long mask = 1 << pin;
+
+	imx_iomuxv1_rmwl(MXC_DDIR(port), mask, out ? mask : 0);
+}
+
+static inline void imx_iomuxv1_set_gpr(
+		unsigned int port, unsigned int pin, int af)
+{
+	unsigned long mask = 1 << pin;
+
+	imx_iomuxv1_rmwl(MXC_GPR(port), mask, af ? mask : 0);
+}
+
+static inline void imx_iomuxv1_set_gius(
+		unsigned int port, unsigned int pin, int inuse)
+{
+	unsigned long mask = 1 << pin;
+
+	imx_iomuxv1_rmwl(MXC_GIUS(port), mask, inuse ? mask : 0);
+}
+
+static inline void imx_iomuxv1_set_ocr(
+		unsigned int port, unsigned int pin, unsigned int ocr)
+{
+	unsigned long shift = (pin & 0xf) << 1;
+	unsigned long mask = 3 << shift;
+	unsigned long value = ocr << shift;
+	unsigned long offset = pin < 16 ? MXC_OCR1(port) : MXC_OCR2(port);
+
+	imx_iomuxv1_rmwl(offset, mask, value);
+}
+
+static inline void imx_iomuxv1_set_iconfa(
+		unsigned int port, unsigned int pin, unsigned int aout)
+{
+	unsigned long shift = (pin & 0xf) << 1;
+	unsigned long mask = 3 << shift;
+	unsigned long value = aout << shift;
+	unsigned long offset = pin < 16 ? MXC_ICONFA1(port) : MXC_ICONFA2(port);
+
+	imx_iomuxv1_rmwl(offset, mask, value);
+}
+
+static inline void imx_iomuxv1_set_iconfb(
+		unsigned int port, unsigned int pin, unsigned int bout)
+{
+	unsigned long shift = (pin & 0xf) << 1;
+	unsigned long mask = 3 << shift;
+	unsigned long value = bout << shift;
+	unsigned long offset = pin < 16 ? MXC_ICONFB1(port) : MXC_ICONFB2(port);
+
+	imx_iomuxv1_rmwl(offset, mask, value);
+}
+
+int mxc_gpio_mode(int gpio_mode)
+{
+	unsigned int pin = gpio_mode & GPIO_PIN_MASK;
+	unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT;
+	unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT;
+	unsigned int aout = (gpio_mode >> GPIO_AOUT_SHIFT) & 3;
+	unsigned int bout = (gpio_mode >> GPIO_BOUT_SHIFT) & 3;
+
+	if (port >= imx_iomuxv1_numports)
+		return -EINVAL;
+
+	/* Pullup enable */
+	imx_iomuxv1_set_puen(port, pin, gpio_mode & GPIO_PUEN);
+
+	/* Data direction */
+	imx_iomuxv1_set_ddir(port, pin, gpio_mode & GPIO_OUT);
+
+	/* Primary / alternate function */
+	imx_iomuxv1_set_gpr(port, pin, gpio_mode & GPIO_AF);
+
+	/* use as gpio? */
+	imx_iomuxv1_set_gius(port, pin, !(gpio_mode & (GPIO_PF | GPIO_AF)));
+
+	imx_iomuxv1_set_ocr(port, pin, ocr);
+
+	imx_iomuxv1_set_iconfa(port, pin, aout);
+
+	imx_iomuxv1_set_iconfb(port, pin, bout);
+
+	return 0;
+}
+EXPORT_SYMBOL(mxc_gpio_mode);
+
+static int imx_iomuxv1_setup_multiple(const int *list, unsigned count)
+{
+	size_t i;
+	int ret;
+
+	for (i = 0; i < count; ++i) {
+		ret = mxc_gpio_mode(list[i]);
+
+		if (ret)
+			return ret;
+	}
+
+	return ret;
+}
+
+int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
+		const char *label)
+{
+	size_t i;
+	int ret;
+
+	for (i = 0; i < count; ++i) {
+		unsigned gpio = pin_list[i] & (GPIO_PIN_MASK | GPIO_PORT_MASK);
+
+		ret = gpio_request(gpio, label);
+		if (ret)
+			goto err_gpio_request;
+	}
+
+	ret = imx_iomuxv1_setup_multiple(pin_list, count);
+	if (ret)
+		goto err_setup;
+
+	return 0;
+
+err_setup:
+	BUG_ON(i != count);
+
+err_gpio_request:
+	mxc_gpio_release_multiple_pins(pin_list, i);
+
+	return ret;
+}
+EXPORT_SYMBOL(mxc_gpio_setup_multiple_pins);
+
+void mxc_gpio_release_multiple_pins(const int *pin_list, int count)
+{
+	size_t i;
+
+	for (i = 0; i < count; ++i) {
+		unsigned gpio = pin_list[i] & (GPIO_PIN_MASK | GPIO_PORT_MASK);
+
+		gpio_free(gpio);
+	}
+}
+EXPORT_SYMBOL(mxc_gpio_release_multiple_pins);
+
+static int imx_iomuxv1_init(void)
+{
+#ifdef CONFIG_ARCH_MX1
+	if (cpu_is_mx1()) {
+		imx_iomuxv1_baseaddr = MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR);
+		imx_iomuxv1_numports = MX1_NUM_GPIO_PORT;
+	} else
+#endif
+#ifdef CONFIG_MACH_MX21
+	if (cpu_is_mx21()) {
+		imx_iomuxv1_baseaddr = MX21_IO_ADDRESS(MX21_GPIO_BASE_ADDR);
+		imx_iomuxv1_numports = MX21_NUM_GPIO_PORT;
+	} else
+#endif
+#ifdef CONFIG_MACH_MX27
+	if (cpu_is_mx27()) {
+		imx_iomuxv1_baseaddr = MX27_IO_ADDRESS(MX27_GPIO_BASE_ADDR);
+		imx_iomuxv1_numports = MX27_NUM_GPIO_PORT;
+	} else
+#endif
+		return -ENODEV;
+
+	return 0;
+}
+pure_initcall(imx_iomuxv1_init);
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 844567ee35fe..c1ce51abdba6 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -30,9 +30,15 @@
 #include <asm/mach/time.h>
 #include <mach/common.h>
 
+/*
+ * There are 2 versions of the timer hardware on Freescale MXC hardware.
+ * Version 1: MX1/MXL, MX21, MX27.
+ * Version 2: MX25, MX31, MX35, MX37, MX51
+ */
+
 /* defines common for all i.MX */
 #define MXC_TCTL		0x00
-#define MXC_TCTL_TEN		(1 << 0)
+#define MXC_TCTL_TEN		(1 << 0) /* Enable module */
 #define MXC_TPRER		0x04
 
 /* MX1, MX21, MX27 */
@@ -47,8 +53,8 @@
 #define MX2_TSTAT_CAPT		(1 << 1)
 #define MX2_TSTAT_COMP		(1 << 0)
 
-/* MX31, MX35, MX25, MXC91231 */
-#define MX3_TCTL_WAITEN		(1 << 3)
+/* MX31, MX35, MX25, MXC91231, MX5 */
+#define MX3_TCTL_WAITEN		(1 << 3) /* Wait enable mode */
 #define MX3_TCTL_CLK_IPG	(1 << 6)
 #define MX3_TCTL_FRR		(1 << 9)
 #define MX3_IR			0x0c
@@ -57,6 +63,9 @@
 #define MX3_TCN			0x24
 #define MX3_TCMP		0x10
 
+#define timer_is_v1()	(cpu_is_mx1() || cpu_is_mx21() || cpu_is_mx27())
+#define timer_is_v2()	(!timer_is_v1())
+
 static struct clock_event_device clockevent_mxc;
 static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
 
@@ -66,7 +75,7 @@ static inline void gpt_irq_disable(void)
 {
 	unsigned int tmp;
 
-	if (cpu_is_mx3() || cpu_is_mx25())
+	if (timer_is_v2())
 		__raw_writel(0, timer_base + MX3_IR);
 	else {
 		tmp = __raw_readl(timer_base + MXC_TCTL);
@@ -76,7 +85,7 @@ static inline void gpt_irq_disable(void)
 
 static inline void gpt_irq_enable(void)
 {
-	if (cpu_is_mx3() || cpu_is_mx25())
+	if (timer_is_v2())
 		__raw_writel(1<<0, timer_base + MX3_IR);
 	else {
 		__raw_writel(__raw_readl(timer_base + MXC_TCTL) | MX1_2_TCTL_IRQEN,
@@ -86,11 +95,13 @@ static inline void gpt_irq_enable(void)
 
 static void gpt_irq_acknowledge(void)
 {
-	if (cpu_is_mx1())
-		__raw_writel(0, timer_base + MX1_2_TSTAT);
-	if (cpu_is_mx2())
-		__raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP, timer_base + MX1_2_TSTAT);
-	if (cpu_is_mx3() || cpu_is_mx25())
+	if (timer_is_v1()) {
+		if (cpu_is_mx1())
+			__raw_writel(0, timer_base + MX1_2_TSTAT);
+		else
+			__raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP,
+				timer_base + MX1_2_TSTAT);
+	} else if (timer_is_v2())
 		__raw_writel(MX3_TSTAT_OF1, timer_base + MX3_TSTAT);
 }
 
@@ -117,7 +128,7 @@ static int __init mxc_clocksource_init(struct clk *timer_clk)
 {
 	unsigned int c = clk_get_rate(timer_clk);
 
-	if (cpu_is_mx3() || cpu_is_mx25())
+	if (timer_is_v2())
 		clocksource_mxc.read = mx3_get_cycles;
 
 	clocksource_mxc.mult = clocksource_hz2mult(c,
@@ -180,7 +191,7 @@ static void mxc_set_mode(enum clock_event_mode mode,
 
 	if (mode != clockevent_mode) {
 		/* Set event time into far-far future */
-		if (cpu_is_mx3() || cpu_is_mx25())
+		if (timer_is_v2())
 			__raw_writel(__raw_readl(timer_base + MX3_TCN) - 3,
 					timer_base + MX3_TCMP);
 		else
@@ -233,7 +244,7 @@ static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id)
 	struct clock_event_device *evt = &clockevent_mxc;
 	uint32_t tstat;
 
-	if (cpu_is_mx3() || cpu_is_mx25())
+	if (timer_is_v2())
 		tstat = __raw_readl(timer_base + MX3_TSTAT);
 	else
 		tstat = __raw_readl(timer_base + MX1_2_TSTAT);
@@ -264,7 +275,7 @@ static int __init mxc_clockevent_init(struct clk *timer_clk)
 {
 	unsigned int c = clk_get_rate(timer_clk);
 
-	if (cpu_is_mx3() || cpu_is_mx25())
+	if (timer_is_v2())
 		clockevent_mxc.set_next_event = mx3_set_next_event;
 
 	clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC,
@@ -296,7 +307,7 @@ void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
 	__raw_writel(0, timer_base + MXC_TCTL);
 	__raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */
 
-	if (cpu_is_mx3() || cpu_is_mx25())
+	if (timer_is_v2())
 		tctl_val = MX3_TCTL_CLK_IPG | MX3_TCTL_FRR | MX3_TCTL_WAITEN | MXC_TCTL_TEN;
 	else
 		tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN;
diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c
new file mode 100644
index 000000000000..afa6709db0b3
--- /dev/null
+++ b/arch/arm/plat-mxc/tzic.c
@@ -0,0 +1,172 @@
+/*
+ * Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+
+/*
+ *****************************************
+ * TZIC Registers                        *
+ *****************************************
+ */
+
+#define TZIC_INTCNTL	0x0000	/* Control register */
+#define TZIC_INTTYPE	0x0004	/* Controller Type register */
+#define TZIC_IMPID	0x0008	/* Distributor Implementer Identification */
+#define TZIC_PRIOMASK	0x000C	/* Priority Mask Reg */
+#define TZIC_SYNCCTRL	0x0010	/* Synchronizer Control register */
+#define TZIC_DSMINT	0x0014	/* DSM interrupt Holdoffregister */
+#define TZIC_INTSEC0(i)	(0x0080 + ((i) << 2)) /* Interrupt Security Reg 0 */
+#define TZIC_ENSET0(i)	(0x0100 + ((i) << 2)) /* Enable Set Reg 0 */
+#define TZIC_ENCLEAR0(i) (0x0180 + ((i) << 2)) /* Enable Clear Reg 0 */
+#define TZIC_SRCSET0	0x0200	/* Source Set Register 0 */
+#define TZIC_SRCCLAR0	0x0280	/* Source Clear Register 0 */
+#define TZIC_PRIORITY0	0x0400	/* Priority Register 0 */
+#define TZIC_PND0	0x0D00	/* Pending Register 0 */
+#define TZIC_HIPND0	0x0D80	/* High Priority Pending Register */
+#define TZIC_WAKEUP0(i)	(0x0E00 + ((i) << 2))	/* Wakeup Config Register */
+#define TZIC_SWINT	0x0F00	/* Software Interrupt Rigger Register */
+#define TZIC_ID0	0x0FD0	/* Indentification Register 0 */
+
+void __iomem *tzic_base; /* Used as irq controller base in entry-macro.S */
+
+/**
+ * tzic_mask_irq() - Disable interrupt number "irq" in the TZIC
+ *
+ * @param  irq          interrupt source number
+ */
+static void tzic_mask_irq(unsigned int irq)
+{
+	int index, off;
+
+	index = irq >> 5;
+	off = irq & 0x1F;
+	__raw_writel(1 << off, tzic_base + TZIC_ENCLEAR0(index));
+}
+
+/**
+ * tzic_unmask_irq() - Enable interrupt number "irq" in the TZIC
+ *
+ * @param  irq          interrupt source number
+ */
+static void tzic_unmask_irq(unsigned int irq)
+{
+	int index, off;
+
+	index = irq >> 5;
+	off = irq & 0x1F;
+	__raw_writel(1 << off, tzic_base + TZIC_ENSET0(index));
+}
+
+static unsigned int wakeup_intr[4];
+
+/**
+ * tzic_set_wake_irq() - Set interrupt number "irq" in the TZIC as a wake-up source.
+ *
+ * @param  irq          interrupt source number
+ * @param  enable       enable as wake-up if equal to non-zero
+ * 			disble as wake-up if equal to zero
+ *
+ * @return       This function returns 0 on success.
+ */
+static int tzic_set_wake_irq(unsigned int irq, unsigned int enable)
+{
+	unsigned int index, off;
+
+	index = irq >> 5;
+	off = irq & 0x1F;
+
+	if (index > 3)
+		return -EINVAL;
+
+	if (enable)
+		wakeup_intr[index] |= (1 << off);
+	else
+		wakeup_intr[index] &= ~(1 << off);
+
+	return 0;
+}
+
+static struct irq_chip mxc_tzic_chip = {
+	.name = "MXC_TZIC",
+	.ack = tzic_mask_irq,
+	.mask = tzic_mask_irq,
+	.unmask = tzic_unmask_irq,
+	.set_wake = tzic_set_wake_irq,
+};
+
+/*
+ * This function initializes the TZIC hardware and disables all the
+ * interrupts. It registers the interrupt enable and disable functions
+ * to the kernel for each interrupt source.
+ */
+void __init tzic_init_irq(void __iomem *irqbase)
+{
+	int i;
+
+	tzic_base = irqbase;
+	/* put the TZIC into the reset value with
+	 * all interrupts disabled
+	 */
+	i = __raw_readl(tzic_base + TZIC_INTCNTL);
+
+	__raw_writel(0x80010001, tzic_base + TZIC_INTCNTL);
+	__raw_writel(0x1f, tzic_base + TZIC_PRIOMASK);
+	__raw_writel(0x02, tzic_base + TZIC_SYNCCTRL);
+
+	for (i = 0; i < 4; i++)
+		__raw_writel(0xFFFFFFFF, tzic_base + TZIC_INTSEC0(i));
+
+	/* disable all interrupts */
+	for (i = 0; i < 4; i++)
+		__raw_writel(0xFFFFFFFF, tzic_base + TZIC_ENCLEAR0(i));
+
+	/* all IRQ no FIQ Warning :: No selection */
+
+	for (i = 0; i < MXC_INTERNAL_IRQS; i++) {
+		set_irq_chip(i, &mxc_tzic_chip);
+		set_irq_handler(i, handle_level_irq);
+		set_irq_flags(i, IRQF_VALID);
+	}
+
+	pr_info("TrustZone Interrupt Controller (TZIC) initialized\n");
+}
+
+/**
+ * tzic_enable_wake() - enable wakeup interrupt
+ *
+ * @param is_idle		1 if called in idle loop (ENSET0 register);
+ *				0 to be used when called from low power entry
+ * @return			0 if successful; non-zero otherwise
+ */
+int tzic_enable_wake(int is_idle)
+{
+	unsigned int i, v;
+
+	__raw_writel(1, tzic_base + TZIC_DSMINT);
+	if (unlikely(__raw_readl(tzic_base + TZIC_DSMINT) == 0))
+		return -EAGAIN;
+
+	for (i = 0; i < 4; i++) {
+		v = is_idle ? __raw_readl(TZIC_ENSET0(i)) : wakeup_intr[i];
+		__raw_writel(v, TZIC_WAKEUP0(i));
+	}
+
+	return 0;
+}
diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c
index 62f18ad43a28..fa7cb3a57cbf 100644
--- a/arch/arm/plat-nomadik/timer.c
+++ b/arch/arm/plat-nomadik/timer.c
@@ -49,24 +49,17 @@ static struct clocksource nmdk_clksrc = {
 static void nmdk_clkevt_mode(enum clock_event_mode mode,
 			     struct clock_event_device *dev)
 {
-	unsigned long flags;
-
 	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
-		/* enable interrupts -- and count current value? */
-		raw_local_irq_save(flags);
+		/* count current value? */
 		writel(readl(mtu_base + MTU_IMSC) | 1, mtu_base + MTU_IMSC);
-		raw_local_irq_restore(flags);
 		break;
 	case CLOCK_EVT_MODE_ONESHOT:
 		BUG(); /* Not supported, yet */
 		/* FALLTHROUGH */
 	case CLOCK_EVT_MODE_SHUTDOWN:
 	case CLOCK_EVT_MODE_UNUSED:
-		/* disable irq */
-		raw_local_irq_save(flags);
 		writel(readl(mtu_base + MTU_IMSC) & ~1, mtu_base + MTU_IMSC);
-		raw_local_irq_restore(flags);
 		break;
 	case CLOCK_EVT_MODE_RESUME:
 		break;
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 337199ed3479..76a347b3ce07 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -2140,18 +2140,18 @@ void omap2_gpio_resume_after_retention(void)
 		if (gen) {
 			u32 old0, old1;
 
-			if (cpu_is_omap24xx() || cpu_is_omap44xx()) {
+			if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
 				old0 = __raw_readl(bank->base +
 					OMAP24XX_GPIO_LEVELDETECT0);
 				old1 = __raw_readl(bank->base +
 					OMAP24XX_GPIO_LEVELDETECT1);
-			__raw_writel(old0 | gen, bank->base +
+				__raw_writel(old0 | gen, bank->base +
 					OMAP24XX_GPIO_LEVELDETECT0);
-			__raw_writel(old1 | gen, bank->base +
+				__raw_writel(old1 | gen, bank->base +
 					OMAP24XX_GPIO_LEVELDETECT1);
-			__raw_writel(old0, bank->base +
+				__raw_writel(old0, bank->base +
 					OMAP24XX_GPIO_LEVELDETECT0);
-			__raw_writel(old1, bank->base +
+				__raw_writel(old1, bank->base +
 					OMAP24XX_GPIO_LEVELDETECT1);
 			}
 
diff --git a/arch/arm/plat-omap/include/plat/blizzard.h b/arch/arm/plat-omap/include/plat/blizzard.h
index 8d160f171372..56e7f2e7d12f 100644
--- a/arch/arm/plat-omap/include/plat/blizzard.h
+++ b/arch/arm/plat-omap/include/plat/blizzard.h
@@ -6,7 +6,7 @@ struct blizzard_platform_data {
 	void		(*power_down)(struct device *dev);
 	unsigned long	(*get_clock_rate)(struct device *dev);
 
-	unsigned	te_connected : 1;
+	unsigned	te_connected:1;
 };
 
 #endif
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index ed8786c41df2..75141742300c 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -167,10 +167,14 @@ IS_OMAP_SUBCLASS(443x, 0x443)
 #if defined(MULTI_OMAP2)
 # if defined(CONFIG_ARCH_OMAP2)
 #  undef  cpu_is_omap24xx
-#  undef  cpu_is_omap242x
-#  undef  cpu_is_omap243x
 #  define cpu_is_omap24xx()		is_omap24xx()
+# endif
+# if defined (CONFIG_ARCH_OMAP2420)
+#  undef  cpu_is_omap242x
 #  define cpu_is_omap242x()		is_omap242x()
+# endif
+# if defined (CONFIG_ARCH_OMAP2430)
+#  undef  cpu_is_omap243x
 #  define cpu_is_omap243x()		is_omap243x()
 # endif
 # if defined(CONFIG_ARCH_OMAP3)
diff --git a/arch/arm/plat-omap/include/plat/prcm.h b/arch/arm/plat-omap/include/plat/prcm.h
index d6a0e27d5a7f..9fbd91419cd1 100644
--- a/arch/arm/plat-omap/include/plat/prcm.h
+++ b/arch/arm/plat-omap/include/plat/prcm.h
@@ -24,7 +24,7 @@
 #define __ASM_ARM_ARCH_OMAP_PRCM_H
 
 u32 omap_prcm_get_reset_sources(void);
-void omap_prcm_arch_reset(char mode);
+void omap_prcm_arch_reset(char mode, const char *cmd);
 int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, u8 idlest,
 			 const char *name);
 
diff --git a/arch/arm/plat-omap/include/plat/system.h b/arch/arm/plat-omap/include/plat/system.h
index c58a4ef42a45..d0a119f735b4 100644
--- a/arch/arm/plat-omap/include/plat/system.h
+++ b/arch/arm/plat-omap/include/plat/system.h
@@ -22,7 +22,7 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void omap1_arch_reset(char mode)
+static inline void omap1_arch_reset(char mode, const char *cmd)
 {
 	/*
 	 * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28
@@ -43,9 +43,9 @@ static inline void omap1_arch_reset(char mode)
 static inline void arch_reset(char mode, const char *cmd)
 {
 	if (!cpu_class_is_omap2())
-		omap1_arch_reset(mode);
+		omap1_arch_reset(mode, cmd);
 	else
-		omap_prcm_arch_reset(mode);
+		omap_prcm_arch_reset(mode, cmd);
 }
 
 #endif
diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h
index 288e29e1c06f..568578db93b6 100644
--- a/arch/arm/plat-omap/include/plat/usb.h
+++ b/arch/arm/plat-omap/include/plat/usb.h
@@ -53,7 +53,7 @@ enum musb_interface    {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};
 
 extern void usb_musb_init(struct omap_musb_board_data *board_data);
 
-extern void usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata);
+extern void usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata);
 
 #endif
 
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index e47686e0a633..52dfcc81511e 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -133,8 +133,7 @@ static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id)
 		dev_err(mcbsp_tx->dev, "TX Frame Sync Error! : 0x%x\n",
 			irqst_spcr2);
 		/* Writing zero to XSYNC_ERR clears the IRQ */
-		MCBSP_WRITE(mcbsp_tx, SPCR2,
-			    MCBSP_READ_CACHE(mcbsp_tx, SPCR2) & ~(XSYNC_ERR));
+		MCBSP_WRITE(mcbsp_tx, SPCR2, MCBSP_READ_CACHE(mcbsp_tx, SPCR2));
 	} else {
 		complete(&mcbsp_tx->tx_irq_completion);
 	}
@@ -154,8 +153,7 @@ static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *dev_id)
 		dev_err(mcbsp_rx->dev, "RX Frame Sync Error! : 0x%x\n",
 			irqst_spcr1);
 		/* Writing zero to RSYNC_ERR clears the IRQ */
-		MCBSP_WRITE(mcbsp_rx, SPCR1,
-			    MCBSP_READ_CACHE(mcbsp_rx, SPCR1) & ~(RSYNC_ERR));
+		MCBSP_WRITE(mcbsp_rx, SPCR1, MCBSP_READ_CACHE(mcbsp_rx, SPCR1));
 	} else {
 		complete(&mcbsp_rx->tx_irq_completion);
 	}
@@ -934,8 +932,7 @@ int omap_mcbsp_pollwrite(unsigned int id, u16 buf)
 	/* if frame sync error - clear the error */
 	if (MCBSP_READ(mcbsp, SPCR2) & XSYNC_ERR) {
 		/* clear error */
-		MCBSP_WRITE(mcbsp, SPCR2,
-				MCBSP_READ_CACHE(mcbsp, SPCR2) & (~XSYNC_ERR));
+		MCBSP_WRITE(mcbsp, SPCR2, MCBSP_READ_CACHE(mcbsp, SPCR2));
 		/* resend */
 		return -1;
 	} else {
@@ -975,8 +972,7 @@ int omap_mcbsp_pollread(unsigned int id, u16 *buf)
 	/* if frame sync error - clear the error */
 	if (MCBSP_READ(mcbsp, SPCR1) & RSYNC_ERR) {
 		/* clear error */
-		MCBSP_WRITE(mcbsp, SPCR1,
-				MCBSP_READ_CACHE(mcbsp, SPCR1) & (~RSYNC_ERR));
+		MCBSP_WRITE(mcbsp, SPCR1, MCBSP_READ_CACHE(mcbsp, SPCR1));
 		/* resend */
 		return -1;
 	} else {
diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig
deleted file mode 100644
index 9e9d0286e48f..000000000000
--- a/arch/arm/plat-s3c/Kconfig
+++ /dev/null
@@ -1,215 +0,0 @@
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-config PLAT_S3C
-	bool
-	depends on ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX
-	default y
-	select NO_IOPORT
-	help
-	  Base platform code for any Samsung S3C device
-
-# low-level serial option nodes
-
-if PLAT_S3C
-
-config CPU_LLSERIAL_S3C2410_ONLY
-	bool
-	default y if CPU_LLSERIAL_S3C2410 && !CPU_LLSERIAL_S3C2440
-
-config CPU_LLSERIAL_S3C2440_ONLY
-	bool
-	default y if CPU_LLSERIAL_S3C2440 && !CPU_LLSERIAL_S3C2410
-
-config CPU_LLSERIAL_S3C2410
-	bool
-	help
-	  Selected if there is an S3C2410 (or register compatible) serial
-	  low-level implementation needed
-
-config CPU_LLSERIAL_S3C2440
-	bool
-	help
-	  Selected if there is an S3C2440 (or register compatible) serial
-	  low-level implementation needed
-
-# boot configurations
-
-comment "Boot options"
-
-config S3C_BOOT_WATCHDOG
-	bool "S3C Initialisation watchdog"
-	depends on S3C2410_WATCHDOG
-	help
-	  Say y to enable the watchdog during the kernel decompression
-	  stage. If the kernel fails to uncompress, then the watchdog
-	  will trigger a reset and the system should restart.
-
-config S3C_BOOT_ERROR_RESET
-	bool "S3C Reboot on decompression error"
-	help
-	  Say y here to use the watchdog to reset the system if the
-	  kernel decompressor detects an error during decompression.
-
-config S3C_BOOT_UART_FORCE_FIFO
-       bool "Force UART FIFO on during boot process"
-       default y
-       help
-         Say Y here to force the UART FIFOs on during the kernel
-	 uncompressor
-
-comment "Power management"
-
-config S3C2410_PM_DEBUG
-	bool "S3C2410 PM Suspend debug"
-	depends on PM
-	help
-	  Say Y here if you want verbose debugging from the PM Suspend and
-	  Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
-	  for more information.
-
-config S3C_PM_DEBUG_LED_SMDK
-       bool "SMDK LED suspend/resume debugging"
-       depends on PM && (MACH_SMDK6410)
-       help
-         Say Y here to enable the use of the SMDK LEDs on the baseboard
-	 for debugging of the state of the suspend and resume process.
-
-	 Note, this currently only works for S3C64XX based SMDK boards.
-
-config S3C2410_PM_CHECK
-	bool "S3C2410 PM Suspend Memory CRC"
-	depends on PM && CRC32
-	help
- 	  Enable the PM code's memory area checksum over sleep. This option
-	  will generate CRCs of all blocks of memory, and store them before
-	  going to sleep. The blocks are then checked on resume for any
-	  errors.
-
-	  Note, this can take several seconds depending on memory size
-	  and CPU speed.
-
-	  See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
-
-config S3C2410_PM_CHECK_CHUNKSIZE
-	int "S3C2410 PM Suspend CRC Chunksize (KiB)"
-	depends on PM && S3C2410_PM_CHECK
-	default 64
-	help
-	  Set the chunksize in Kilobytes of the CRC for checking memory
-	  corruption over suspend and resume. A smaller value will mean that
-	  the CRC data block will take more memory, but wil identify any
-	  faults with better precision.
-
-	  See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
-
-config S3C_LOWLEVEL_UART_PORT
-	int "S3C UART to use for low-level messages"
-	default 0
-	help
-	  Choice of which UART port to use for the low-level messages,
-	  such as the `Uncompressing...` at start time. The value of
-	  this configuration should be between zero and two. The port
-	  must have been initialised by the boot-loader before use.
-
-# options for gpiolib support
-
-config S3C_GPIO_SPACE
-	int "Space between gpio banks"
-	default 0
-	help
-	  Add a number of spare GPIO entries between each bank for debugging
-	  purposes. This allows any problems where an counter overflows from
-	  one bank to another to be caught, at the expense of using a little
-	  more memory.
-
-config S3C_GPIO_TRACK
-	bool
-	help
-	  Internal configuration option to enable the s3c specific gpio
-	  chip tracking if the platform requires it.
-
-config S3C_GPIO_PULL_UPDOWN
-	bool
-	help
-	  Internal configuration to enable the correct GPIO pull helper
-
-config S3C_GPIO_PULL_DOWN
-	bool
-	help
-	  Internal configuration to enable the correct GPIO pull helper
-
-config S3C_GPIO_PULL_UP
-	bool
-	help
-	  Internal configuration to enable the correct GPIO pull helper
-
-config S3C_GPIO_CFG_S3C24XX
-	bool
-	help
-	  Internal configuration to enable S3C24XX style GPIO configuration
-	  functions.
-
-config S3C_GPIO_CFG_S3C64XX
-	bool
-	help
-	  Internal configuration to enable S3C64XX style GPIO configuration
-	  functions.
-
-config S5P_GPIO_CFG_S5PC1XX
-	bool
-	help
-	  Internal configuration to enable S5PC1XX style GPIO configuration
-	  functions.
-
-# DMA
-
-config S3C_DMA
-	bool
-	help
-	  Internal configuration for S3C DMA core
-
-# device definitions to compile in
-
-config S3C_DEV_HSMMC
-	bool
-	help
-	  Compile in platform device definitions for HSMMC code
-
-config S3C_DEV_HSMMC1
-	bool
-	help
-	  Compile in platform device definitions for HSMMC channel 1
-
-config S3C_DEV_HSMMC2
-	bool
-	help
-	  Compile in platform device definitions for HSMMC channel 2
-
-config S3C_DEV_I2C1
-	bool
-	help
-	  Compile in platform device definitions for I2C channel 1
-
-config S3C_DEV_FB
-	bool
-	help
-	  Compile in platform device definition for framebuffer
-
-config S3C_DEV_USB_HOST
-	bool
-	help
-	  Compile in platform device definition for USB host.
-
-config S3C_DEV_USB_HSOTG
-	bool
-	help
-	  Compile in platform device definition for USB high-speed OtG
-
-config S3C_DEV_NAND
-	bool
-	help
-	  Compile in platform device definition for NAND controller
-
-endif
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
deleted file mode 100644
index 50444da98425..000000000000
--- a/arch/arm/plat-s3c/Makefile
+++ /dev/null
@@ -1,45 +0,0 @@
-# arch/arm/plat-s3c/Makefile
-#
-# Copyright 2008 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:=
-obj-				:=
-
-# Core support for all Samsung SoCs
-
-obj-y				+=  init.o
-obj-y				+= time.o
-obj-y				+= clock.o
-obj-y				+= pwm-clock.o
-obj-y				+= gpio.o
-obj-y				+= gpio-config.o
-
-# DMA support
-
-obj-$(CONFIG_S3C_DMA)		+= dma.o
-
-# PM support
-
-obj-$(CONFIG_PM)		+= pm.o
-obj-$(CONFIG_PM)		+= pm-gpio.o
-obj-$(CONFIG_S3C2410_PM_CHECK)	+= pm-check.o
-
-# PWM support
-
-obj-$(CONFIG_HAVE_PWM)		+= pwm.o
-
-# devices
-
-obj-$(CONFIG_S3C_DEV_HSMMC)	+= dev-hsmmc.o
-obj-$(CONFIG_S3C_DEV_HSMMC1)	+= dev-hsmmc1.o
-obj-$(CONFIG_S3C_DEV_HSMMC2)	+= dev-hsmmc2.o
-obj-y				+= dev-i2c0.o
-obj-$(CONFIG_S3C_DEV_I2C1)	+= dev-i2c1.o
-obj-$(CONFIG_S3C_DEV_FB)	+= dev-fb.o
-obj-$(CONFIG_S3C_DEV_USB_HOST)	+= dev-usb.o
-obj-$(CONFIG_S3C_DEV_USB_HSOTG)	+= dev-usb-hsotg.o
-obj-$(CONFIG_S3C_DEV_NAND)	+= dev-nand.o
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 342647eb91d8..6e93ef8f3d43 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -14,58 +14,40 @@ config PLAT_S3C24XX
 
 if PLAT_S3C24XX
 
-# code that is shared between a number of the s3c24xx implementations
+# low-level serial option nodes
 
-config S3C2410_CLOCK
+config CPU_LLSERIAL_S3C2410_ONLY
 	bool
-	help
-	  Clock code for the S3C2410, and similar processors which
-	  is currently includes the S3C2410, S3C2440, S3C2442.
+	default y if CPU_LLSERIAL_S3C2410 && !CPU_LLSERIAL_S3C2440
 
-config S3C24XX_DCLK
+config CPU_LLSERIAL_S3C2440_ONLY
 	bool
-	help
-	  Clock code for supporting DCLK/CLKOUT on S3C24XX architectures
+	default y if CPU_LLSERIAL_S3C2440 && !CPU_LLSERIAL_S3C2410
 
-config CPU_S3C244X
+config CPU_LLSERIAL_S3C2410
 	bool
-	depends on ARCH_S3C2410 && (CPU_S3C2440 || CPU_S3C2442)
-	help
-	  Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
-
-config S3C2440_CPUFREQ
-	bool "S3C2440/S3C2442 CPU Frequency scaling support"
-	depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
-	select S3C2410_CPUFREQ_UTILS
-	default y
 	help
-	  CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
+	  Selected if there is an S3C2410 (or register compatible) serial
+	  low-level implementation needed
 
-config S3C2440_XTAL_12000000
+config CPU_LLSERIAL_S3C2440
 	bool
 	help
-	  Indicate that the build needs to support 12MHz system
-	  crystal.
+	  Selected if there is an S3C2440 (or register compatible) serial
+	  low-level implementation needed
 
-config S3C2440_XTAL_16934400
-	bool
-	help
-	  Indicate that the build needs to support 16.9344MHz system
-	  crystal.
+# code that is shared between a number of the s3c24xx implementations
 
-config S3C2440_PLL_12000000
+config S3C2410_CLOCK
 	bool
-	depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000
-	default y if CPU_FREQ_S3C24XX_PLL
 	help
-	  PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
+	  Clock code for the S3C2410, and similar processors which
+	  is currently includes the S3C2410, S3C2440, S3C2442.
 
-config S3C2440_PLL_16934400
+config S3C24XX_DCLK
 	bool
-	depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400
-	default y if CPU_FREQ_S3C24XX_PLL
 	help
-	  PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
+	  Clock code for supporting DCLK/CLKOUT on S3C24XX architectures
 
 config S3C24XX_PWM
 	bool "PWM device support"
@@ -74,7 +56,6 @@ config S3C24XX_PWM
 	  Support for exporting the PWM timer blocks via the pwm device
 	  system.
 
-
 # gpio configurations
 
 config S3C24XX_GPIO_EXTRA
@@ -117,13 +98,6 @@ config S3C2410_DMA_DEBUG
 	  Enable debugging output for the DMA code. This option sends info
 	  to the kernel log, at priority KERN_DEBUG.
 
-config S3C24XX_ADC
-	bool "ADC common driver support"
-	help
-	  Core support for the ADC block found in the S3C24XX SoC systems
-	  for drivers such as the touchscreen and hwmon to use to share
-	  this resource.
-
 # SPI default pin configuration code
 
 config S3C24XX_SPI_BUS0_GPE11_GPE12_GPE13
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 5dee8c12e8b4..c2237c41141f 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -25,20 +25,12 @@ obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpu-freq-debugfs.o
 
 # Architecture dependant builds
 
-obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o
-obj-$(CONFIG_CPU_S3C244X)	+= s3c244x-irq.o
-obj-$(CONFIG_CPU_S3C244X)	+= s3c244x-clock.o
-obj-$(CONFIG_S3C2440_CPUFREQ)	+= s3c2440-cpufreq.o
-obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o
-obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o
-
 obj-$(CONFIG_PM_SIMTEC)		+= pm-simtec.o
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_PM)		+= irq-pm.o
 obj-$(CONFIG_PM)		+= sleep.o
 obj-$(CONFIG_S3C2410_CLOCK)	+= s3c2410-clock.o
 obj-$(CONFIG_S3C2410_DMA)	+= dma.o
-obj-$(CONFIG_S3C24XX_ADC)	+= adc.o
 obj-$(CONFIG_S3C2410_IOTIMING)	+= s3c2410-iotiming.o
 obj-$(CONFIG_S3C2412_IOTIMING)	+= s3c2412-iotiming.o
 obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += s3c2410-cpufreq-utils.o
diff --git a/arch/arm/plat-s3c24xx/clock-dclk.c b/arch/arm/plat-s3c24xx/clock-dclk.c
index ac061a1bcb37..cf97caafe56b 100644
--- a/arch/arm/plat-s3c24xx/clock-dclk.c
+++ b/arch/arm/plat-s3c24xx/clock-dclk.c
@@ -161,14 +161,18 @@ static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent)
 
 /* external clock definitions */
 
+static struct clk_ops dclk_ops = {
+	.set_parent	= s3c24xx_dclk_setparent,
+	.set_rate	= s3c24xx_set_dclk_rate,
+	.round_rate	= s3c24xx_round_dclk_rate,
+};
+
 struct clk s3c24xx_dclk0 = {
 	.name		= "dclk0",
 	.id		= -1,
 	.ctrlbit	= S3C2410_DCLKCON_DCLK0EN,
 	.enable	        = s3c24xx_dclk_enable,
-	.set_parent	= s3c24xx_dclk_setparent,
-	.set_rate	= s3c24xx_set_dclk_rate,
-	.round_rate	= s3c24xx_round_dclk_rate,
+	.ops		= &dclk_ops,
 };
 
 struct clk s3c24xx_dclk1 = {
@@ -176,19 +180,21 @@ struct clk s3c24xx_dclk1 = {
 	.id		= -1,
 	.ctrlbit	= S3C2410_DCLKCON_DCLK1EN,
 	.enable		= s3c24xx_dclk_enable,
-	.set_parent	= s3c24xx_dclk_setparent,
-	.set_rate	= s3c24xx_set_dclk_rate,
-	.round_rate	= s3c24xx_round_dclk_rate,
+	.ops		= &dclk_ops,
+};
+
+static struct clk_ops clkout_ops = {
+	.set_parent	= s3c24xx_clkout_setparent,
 };
 
 struct clk s3c24xx_clkout0 = {
 	.name		= "clkout0",
 	.id		= -1,
-	.set_parent	= s3c24xx_clkout_setparent,
+	.ops		= &clkout_ops,
 };
 
 struct clk s3c24xx_clkout1 = {
 	.name		= "clkout1",
 	.id		= -1,
-	.set_parent	= s3c24xx_clkout_setparent,
+	.ops		= &clkout_ops,
 };
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 4af9dd948793..9ca64df35bf6 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -49,9 +49,7 @@
 #include <plat/s3c2400.h>
 #include <plat/s3c2410.h>
 #include <plat/s3c2412.h>
-#include "s3c244x.h"
-#include <plat/s3c2440.h>
-#include <plat/s3c2442.h>
+#include <plat/s3c244x.h>
 #include <plat/s3c2443.h>
 
 /* table of supported CPUs */
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index 7f686a31e672..8c6de1c9968f 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -32,6 +32,7 @@
 
 #include <plat/regs-serial.h>
 #include <plat/udc.h>
+#include <plat/mci.h>
 
 #include <plat/devs.h>
 #include <plat/cpu.h>
@@ -112,34 +113,6 @@ struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = {
 	},
 };
 
-/* yart devices */
-
-static struct platform_device s3c24xx_uart_device0 = {
-	.id		= 0,
-};
-
-static struct platform_device s3c24xx_uart_device1 = {
-	.id		= 1,
-};
-
-static struct platform_device s3c24xx_uart_device2 = {
-	.id		= 2,
-};
-
-static struct platform_device s3c24xx_uart_device3 = {
-	.id		= 3,
-};
-
-struct platform_device *s3c24xx_uart_src[4] = {
-	&s3c24xx_uart_device0,
-	&s3c24xx_uart_device1,
-	&s3c24xx_uart_device2,
-	&s3c24xx_uart_device3,
-};
-
-struct platform_device *s3c24xx_uart_devs[4] = {
-};
-
 /* LCD Controller */
 
 static struct resource s3c_lcd_resource[] = {
@@ -185,9 +158,27 @@ void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd)
 }
 
 /* Touchscreen */
+
+static struct resource s3c_ts_resource[] = {
+	[0] = {
+		.start = S3C24XX_PA_ADC,
+		.end   = S3C24XX_PA_ADC + S3C24XX_SZ_ADC - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TC,
+		.end   = IRQ_TC,
+		.flags = IORESOURCE_IRQ,
+	},
+
+};
+
 struct platform_device s3c_device_ts = {
 	.name		  = "s3c2410-ts",
 	.id		  = -1,
+	.dev.parent	= &s3c_device_adc.dev,
+	.num_resources	  = ARRAY_SIZE(s3c_ts_resource),
+	.resource	  = s3c_ts_resource,
 };
 EXPORT_SYMBOL(s3c_device_ts);
 
@@ -379,6 +370,18 @@ struct platform_device s3c_device_sdi = {
 
 EXPORT_SYMBOL(s3c_device_sdi);
 
+void s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata)
+{
+	struct s3c24xx_mci_pdata *npd;
+
+	npd = kmemdup(pdata, sizeof(struct s3c24xx_mci_pdata), GFP_KERNEL);
+	if (!npd)
+		printk(KERN_ERR "%s: no memory to copy pdata", __func__);
+
+	s3c_device_sdi.dev.platform_data = npd;
+}
+
+
 /* SPI (0) */
 
 static struct resource s3c_spi0_resource[] = {
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index f0ea7943ac5a..93827b3d4e84 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -33,7 +33,7 @@
 #include <mach/dma.h>
 #include <mach/map.h>
 
-#include <plat/dma-plat.h>
+#include <plat/dma-s3c24xx.h>
 #include <plat/regs-dma.h>
 
 /* io map for dma */
diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
index 6d7a961d3269..4f0f11a6a677 100644
--- a/arch/arm/plat-s3c24xx/gpiolib.c
+++ b/arch/arm/plat-s3c24xx/gpiolib.c
@@ -20,7 +20,7 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 
-#include <mach/gpio-core.h>
+#include <plat/gpio-core.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
 #include <plat/pm.h>
diff --git a/arch/arm/plat-s3c/include/plat/audio-simtec.h b/arch/arm/plat-s3c24xx/include/plat/audio-simtec.h
index 53a93656d5db..de5e88fdcb31 100644
--- a/arch/arm/plat-s3c/include/plat/audio-simtec.h
+++ b/arch/arm/plat-s3c24xx/include/plat/audio-simtec.h
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c/include/plat/audio-simtec.h
+/* arch/arm/plat-s3c24xx/include/plat/audio-simtec.h
  *
  * Copyright 2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
index 33d421d78bad..d623235ae961 100644
--- a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
+++ b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
@@ -135,7 +135,7 @@ struct s3c_cpufreq_config {
  * @locktime_m: The lock-time in uS for the MPLL.
  * @locktime_u: The lock-time in uS for the UPLL.
  * @locttime_bits: The number of bits each LOCKTIME field.
- * @need_pll: Set if this driver needs to change the PLL values to acheive
+ * @need_pll: Set if this driver needs to change the PLL values to achieve
  *	any frequency changes. This is really only need by devices like the
  *	S3C2410 where there is no or limited divider between the PLL and the
  *	ARMCLK.
diff --git a/arch/arm/plat-s3c24xx/include/plat/mci.h b/arch/arm/plat-s3c24xx/include/plat/mci.h
index 36aaa10fad06..2ac2b21ec490 100644
--- a/arch/arm/plat-s3c24xx/include/plat/mci.h
+++ b/arch/arm/plat-s3c24xx/include/plat/mci.h
@@ -40,4 +40,13 @@ struct s3c24xx_mci_pdata {
 				     unsigned short vdd);
 };
 
+/**
+ * s3c24xx_mci_set_platdata - set platform data for mmc/sdi device
+ * @pdata: The platform data
+ *
+ * Copy the platform data supplied by @pdata so that this can be marked
+ * __initdata.
+ */
+extern void s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata);
+
 #endif /* _ARCH_NCI_H */
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2440.h b/arch/arm/plat-s3c24xx/include/plat/s3c2440.h
deleted file mode 100644
index 107853bf9481..000000000000
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2440.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/s3c2440.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2440 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2440
-extern  int s3c2440_init(void);
-#else
-#define s3c2440_init NULL
-#endif
diff --git a/arch/arm/plat-s3c24xx/s3c244x.h b/arch/arm/plat-s3c24xx/include/plat/s3c244x.h
index 6aab5eaae2b4..307248d1ccbb 100644
--- a/arch/arm/plat-s3c24xx/s3c244x.h
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c244x.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c24xx/s3c244x.h
+/* linux/arch/arm/plat-s3c24xx/include/plat/s3c244x.h
  *
  * Copyright (c) 2004-2005 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -23,3 +23,15 @@ extern void s3c244x_init_clocks(int xtal);
 #define s3c244x_init_uarts NULL
 #define s3c244x_map_io NULL
 #endif
+
+#ifdef CONFIG_CPU_S3C2440
+extern  int s3c2440_init(void);
+#else
+#define s3c2440_init NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2442
+extern  int s3c2442_init(void);
+#else
+#define s3c2442_init NULL
+#endif
diff --git a/arch/arm/plat-s3c64xx/Kconfig b/arch/arm/plat-s3c64xx/Kconfig
deleted file mode 100644
index e6da87a5885c..000000000000
--- a/arch/arm/plat-s3c64xx/Kconfig
+++ /dev/null
@@ -1,71 +0,0 @@
-# Copyright 2008 Openmoko, Inc.
-# Copyright 2008 Simtec Electronics
-#	Ben Dooks <ben@simtec.co.uk>
-#
-# Licensed under GPLv2
-
-config PLAT_S3C64XX
-	bool
-	depends on ARCH_S3C64XX
-	default y
-	select CPU_V6
-	select PLAT_S3C
-	select ARM_VIC
-	select NO_IOPORT
-	select ARCH_REQUIRE_GPIOLIB
-	select S3C_GPIO_TRACK
-	select S3C_GPIO_PULL_UPDOWN
-	select S3C_GPIO_CFG_S3C24XX
-	select S3C_GPIO_CFG_S3C64XX
-	select S3C_DEV_NAND
-	select USB_ARCH_HAS_OHCI
-	help
-	  Base platform code for any Samsung S3C64XX device
-
-if PLAT_S3C64XX
-
-# Configuration options shared by all S3C64XX implementations
-
-config CPU_S3C6400_INIT
-	bool
-	help
-	  Common initialisation code for the S3C6400 that is shared
-	  by other CPUs in the series, such as the S3C6410.
-
-config CPU_S3C6400_CLOCK
-	bool
-	help
-	  Common clock support code for the S3C6400 that is shared
-	  by other CPUs in the series, such as the S3C6410.
-
-config S3C64XX_DMA
-	bool "S3C64XX DMA"
-	select S3C_DMA
-
-# platform specific device setup
-
-config S3C64XX_SETUP_I2C0
-	bool
-	default y
-	help
-	  Common setup code for i2c bus 0.
-
-	  Note, currently since i2c0 is always compiled, this setup helper
-	  is always compiled with it.
-
-config S3C64XX_SETUP_I2C1
-	bool
-	help
-	  Common setup code for i2c bus 1.
-
-config S3C64XX_SETUP_FB_24BPP
-	bool
-	help
-	  Common setup code for S3C64XX with an 24bpp RGB display helper.
-
-config S3C64XX_SETUP_SDHCI_GPIO
-	bool
-	help
-	  Common setup code for S3C64XX SDHCI GPIO configurations
-
-endif
diff --git a/arch/arm/plat-s3c64xx/clock.c b/arch/arm/plat-s3c64xx/clock.c
deleted file mode 100644
index 7a36e899360d..000000000000
--- a/arch/arm/plat-s3c64xx/clock.c
+++ /dev/null
@@ -1,300 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/clock.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C64XX Base clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/regs-sys.h>
-#include <plat/regs-clock.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-
-struct clk clk_h2 = {
-	.name		= "hclk2",
-	.id		= -1,
-	.rate		= 0,
-};
-
-struct clk clk_27m = {
-	.name		= "clk_27m",
-	.id		= -1,
-	.rate		= 27000000,
-};
-
-static int clk_48m_ctrl(struct clk *clk, int enable)
-{
-	unsigned long flags;
-	u32 val;
-
-	/* can't rely on clock lock, this register has other usages */
-	local_irq_save(flags);
-
-	val = __raw_readl(S3C64XX_OTHERS);
-	if (enable)
-		val |= S3C64XX_OTHERS_USBMASK;
-	else
-		val &= ~S3C64XX_OTHERS_USBMASK;
-
-	__raw_writel(val, S3C64XX_OTHERS);
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-struct clk clk_48m = {
-	.name		= "clk_48m",
-	.id		= -1,
-	.rate		= 48000000,
-	.enable		= clk_48m_ctrl,
-};
-
-static int inline s3c64xx_gate(void __iomem *reg,
-				struct clk *clk,
-				int enable)
-{
-	unsigned int ctrlbit = clk->ctrlbit;
-	u32 con;
-
-	con = __raw_readl(reg);
-
-	if (enable)
-		con |= ctrlbit;
-	else
-		con &= ~ctrlbit;
-
-	__raw_writel(con, reg);
-	return 0;
-}
-
-static int s3c64xx_pclk_ctrl(struct clk *clk, int enable)
-{
-	return s3c64xx_gate(S3C_PCLK_GATE, clk, enable);
-}
-
-static int s3c64xx_hclk_ctrl(struct clk *clk, int enable)
-{
-	return s3c64xx_gate(S3C_HCLK_GATE, clk, enable);
-}
-
-int s3c64xx_sclk_ctrl(struct clk *clk, int enable)
-{
-	return s3c64xx_gate(S3C_SCLK_GATE, clk, enable);
-}
-
-static struct clk init_clocks_disable[] = {
-	{
-		.name		= "nand",
-		.id		= -1,
-		.parent		= &clk_h,
-	}, {
-		.name		= "adc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_TSADC,
-	}, {
-		.name		= "i2c",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_IIC,
-	}, {
-		.name		= "iis",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_IIS0,
-	}, {
-		.name		= "iis",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_IIS1,
-	}, {
-		.name		= "spi",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_SPI0,
-	}, {
-		.name		= "spi",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_SPI1,
-	}, {
-		.name		= "48m",
-		.id		= 0,
-		.parent		= &clk_48m,
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_MMC0_48,
-	}, {
-		.name		= "48m",
-		.id		= 1,
-		.parent		= &clk_48m,
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_MMC1_48,
-	}, {
-		.name		= "48m",
-		.id		= 2,
-		.parent		= &clk_48m,
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_MMC2_48,
-	}, {
-		.name		= "dma0",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_DMA0,
-	}, {
-		.name		= "dma1",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_DMA1,
-	},
-};
-
-static struct clk init_clocks[] = {
-	{
-		.name		= "lcd",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_LCD,
-	}, {
-		.name		= "gpio",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_GPIO,
-	}, {
-		.name		= "usb-host",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_UHOST,
-	}, {
-		.name		= "hsmmc",
-		.id		= 0,
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_HSMMC0,
-	}, {
-		.name		= "hsmmc",
-		.id		= 1,
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_HSMMC1,
-	}, {
-		.name		= "hsmmc",
-		.id		= 2,
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_HSMMC2,
-	}, {
-		.name		= "timers",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_PWM,
-	}, {
-		.name		= "uart",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_UART0,
-	}, {
-		.name		= "uart",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_UART1,
-	}, {
-		.name		= "uart",
-		.id		= 2,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_UART2,
-	}, {
-		.name		= "uart",
-		.id		= 3,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_UART3,
-	}, {
-		.name		= "rtc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_RTC,
-	}, {
-		.name		= "watchdog",
-		.id		= -1,
-		.parent		= &clk_p,
-		.ctrlbit	= S3C_CLKCON_PCLK_WDT,
-	}, {
-		.name		= "ac97",
-		.id		= -1,
-		.parent		= &clk_p,
-		.ctrlbit	= S3C_CLKCON_PCLK_AC97,
-	}
-};
-
-static struct clk *clks[] __initdata = {
-	&clk_ext,
-	&clk_epll,
-	&clk_27m,
-	&clk_48m,
-	&clk_h2,
-};
-
-void __init s3c64xx_register_clocks(void)
-{
-	struct clk *clkp;
-	int ret;
-	int ptr;
-
-	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
-	clkp = init_clocks;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-	}
-
-	clkp = init_clocks_disable;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-
-		(clkp->enable)(clkp, 0);
-	}
-
-	s3c_pwmclk_init();
-}
diff --git a/arch/arm/plat-s3c64xx/dev-audio.c b/arch/arm/plat-s3c64xx/dev-audio.c
deleted file mode 100644
index a21a88fbb7e3..000000000000
--- a/arch/arm/plat-s3c64xx/dev-audio.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/* linux/arch/arm/plat-s3c/dev-audio.c
- *
- * Copyright 2009 Wolfson Microelectronics
- *      Mark Brown <broonie@opensource.wolfsonmicro.com>
- *
-
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-#include <mach/dma.h>
-#include <mach/gpio.h>
-
-#include <plat/devs.h>
-#include <plat/audio.h>
-#include <plat/gpio-bank-d.h>
-#include <plat/gpio-bank-e.h>
-#include <plat/gpio-cfg.h>
-
-static struct resource s3c64xx_iis0_resource[] = {
-	[0] = {
-		.start = S3C64XX_PA_IIS0,
-		.end   = S3C64XX_PA_IIS0 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device s3c64xx_device_iis0 = {
-	.name		  = "s3c64xx-iis",
-	.id		  = 0,
-	.num_resources	  = ARRAY_SIZE(s3c64xx_iis0_resource),
-	.resource	  = s3c64xx_iis0_resource,
-};
-EXPORT_SYMBOL(s3c64xx_device_iis0);
-
-static struct resource s3c64xx_iis1_resource[] = {
-	[0] = {
-		.start = S3C64XX_PA_IIS1,
-		.end   = S3C64XX_PA_IIS1 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device s3c64xx_device_iis1 = {
-	.name		  = "s3c64xx-iis",
-	.id		  = 1,
-	.num_resources	  = ARRAY_SIZE(s3c64xx_iis1_resource),
-	.resource	  = s3c64xx_iis1_resource,
-};
-EXPORT_SYMBOL(s3c64xx_device_iis1);
-
-static struct resource s3c64xx_iisv4_resource[] = {
-	[0] = {
-		.start = S3C64XX_PA_IISV4,
-		.end   = S3C64XX_PA_IISV4 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device s3c64xx_device_iisv4 = {
-	.name		  = "s3c64xx-iis-v4",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c64xx_iisv4_resource),
-	.resource	  = s3c64xx_iisv4_resource,
-};
-EXPORT_SYMBOL(s3c64xx_device_iisv4);
-
-
-/* PCM Controller platform_devices */
-
-static int s3c64xx_pcm_cfg_gpio(struct platform_device *pdev)
-{
-	switch (pdev->id) {
-	case 0:
-		s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_PCM0_SCLK);
-		s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_PCM0_EXTCLK);
-		s3c_gpio_cfgpin(S3C64XX_GPD(2), S3C64XX_GPD2_PCM0_FSYNC);
-		s3c_gpio_cfgpin(S3C64XX_GPD(3), S3C64XX_GPD3_PCM0_SIN);
-		s3c_gpio_cfgpin(S3C64XX_GPD(4), S3C64XX_GPD4_PCM0_SOUT);
-		break;
-	case 1:
-		s3c_gpio_cfgpin(S3C64XX_GPE(0), S3C64XX_GPE0_PCM1_SCLK);
-		s3c_gpio_cfgpin(S3C64XX_GPE(1), S3C64XX_GPE1_PCM1_EXTCLK);
-		s3c_gpio_cfgpin(S3C64XX_GPE(2), S3C64XX_GPE2_PCM1_FSYNC);
-		s3c_gpio_cfgpin(S3C64XX_GPE(3), S3C64XX_GPE3_PCM1_SIN);
-		s3c_gpio_cfgpin(S3C64XX_GPE(4), S3C64XX_GPE4_PCM1_SOUT);
-		break;
-	default:
-		printk(KERN_DEBUG "Invalid PCM Controller number!");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static struct resource s3c64xx_pcm0_resource[] = {
-	[0] = {
-		.start = S3C64XX_PA_PCM0,
-		.end   = S3C64XX_PA_PCM0 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_PCM0_TX,
-		.end   = DMACH_PCM0_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_PCM0_RX,
-		.end   = DMACH_PCM0_RX,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static struct s3c_audio_pdata s3c_pcm0_pdata = {
-	.cfg_gpio = s3c64xx_pcm_cfg_gpio,
-};
-
-struct platform_device s3c64xx_device_pcm0 = {
-	.name		  = "samsung-pcm",
-	.id		  = 0,
-	.num_resources	  = ARRAY_SIZE(s3c64xx_pcm0_resource),
-	.resource	  = s3c64xx_pcm0_resource,
-	.dev = {
-		.platform_data = &s3c_pcm0_pdata,
-	},
-};
-EXPORT_SYMBOL(s3c64xx_device_pcm0);
-
-static struct resource s3c64xx_pcm1_resource[] = {
-	[0] = {
-		.start = S3C64XX_PA_PCM1,
-		.end   = S3C64XX_PA_PCM1 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_PCM1_TX,
-		.end   = DMACH_PCM1_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_PCM1_RX,
-		.end   = DMACH_PCM1_RX,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static struct s3c_audio_pdata s3c_pcm1_pdata = {
-	.cfg_gpio = s3c64xx_pcm_cfg_gpio,
-};
-
-struct platform_device s3c64xx_device_pcm1 = {
-	.name		  = "samsung-pcm",
-	.id		  = 1,
-	.num_resources	  = ARRAY_SIZE(s3c64xx_pcm1_resource),
-	.resource	  = s3c64xx_pcm1_resource,
-	.dev = {
-		.platform_data = &s3c_pcm1_pdata,
-	},
-};
-EXPORT_SYMBOL(s3c64xx_device_pcm1);
diff --git a/arch/arm/plat-s3c64xx/irq.c b/arch/arm/plat-s3c64xx/irq.c
deleted file mode 100644
index 8dc5b6da9789..000000000000
--- a/arch/arm/plat-s3c64xx/irq.c
+++ /dev/null
@@ -1,256 +0,0 @@
-/* arch/arm/plat-s3c64xx/irq.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C64XX - Interrupt handling
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/serial_core.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <asm/hardware/vic.h>
-
-#include <mach/map.h>
-#include <plat/regs-serial.h>
-#include <plat/regs-timer.h>
-#include <plat/cpu.h>
-
-/* Timer interrupt handling */
-
-static void s3c_irq_demux_timer(unsigned int base_irq, unsigned int sub_irq)
-{
-	generic_handle_irq(sub_irq);
-}
-
-static void s3c_irq_demux_timer0(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_timer(irq, IRQ_TIMER0);
-}
-
-static void s3c_irq_demux_timer1(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_timer(irq, IRQ_TIMER1);
-}
-
-static void s3c_irq_demux_timer2(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_timer(irq, IRQ_TIMER2);
-}
-
-static void s3c_irq_demux_timer3(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_timer(irq, IRQ_TIMER3);
-}
-
-static void s3c_irq_demux_timer4(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_timer(irq, IRQ_TIMER4);
-}
-
-/* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */
-
-static void s3c_irq_timer_mask(unsigned int irq)
-{
-	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
-
-	reg &= 0x1f;  /* mask out pending interrupts */
-	reg &= ~(1 << (irq - IRQ_TIMER0));
-	__raw_writel(reg, S3C64XX_TINT_CSTAT);
-}
-
-static void s3c_irq_timer_unmask(unsigned int irq)
-{
-	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
-
-	reg &= 0x1f;  /* mask out pending interrupts */
-	reg |= 1 << (irq - IRQ_TIMER0);
-	__raw_writel(reg, S3C64XX_TINT_CSTAT);
-}
-
-static void s3c_irq_timer_ack(unsigned int irq)
-{
-	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
-
-	reg &= 0x1f;
-	reg |= (1 << 5) << (irq - IRQ_TIMER0);
-	__raw_writel(reg, S3C64XX_TINT_CSTAT);
-}
-
-static struct irq_chip s3c_irq_timer = {
-	.name		= "s3c-timer",
-	.mask		= s3c_irq_timer_mask,
-	.unmask		= s3c_irq_timer_unmask,
-	.ack		= s3c_irq_timer_ack,
-};
-
-struct uart_irq {
-	void __iomem	*regs;
-	unsigned int	 base_irq;
-	unsigned int	 parent_irq;
-};
-
-/* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3]
- * are consecutive when looking up the interrupt in the demux routines.
- */
-static struct uart_irq uart_irqs[] = {
-	[0] = {
-		.regs		= S3C_VA_UART0,
-		.base_irq	= IRQ_S3CUART_BASE0,
-		.parent_irq	= IRQ_UART0,
-	},
-	[1] = {
-		.regs		= S3C_VA_UART1,
-		.base_irq	= IRQ_S3CUART_BASE1,
-		.parent_irq	= IRQ_UART1,
-	},
-	[2] = {
-		.regs		= S3C_VA_UART2,
-		.base_irq	= IRQ_S3CUART_BASE2,
-		.parent_irq	= IRQ_UART2,
-	},
-	[3] = {
-		.regs		= S3C_VA_UART3,
-		.base_irq	= IRQ_S3CUART_BASE3,
-		.parent_irq	= IRQ_UART3,
-	},
-};
-
-static inline void __iomem *s3c_irq_uart_base(unsigned int irq)
-{
-	struct uart_irq *uirq = get_irq_chip_data(irq);
-	return uirq->regs;
-}
-
-static inline unsigned int s3c_irq_uart_bit(unsigned int irq)
-{
-	return irq & 3;
-}
-
-/* UART interrupt registers, not worth adding to seperate include header */
-
-static void s3c_irq_uart_mask(unsigned int irq)
-{
-	void __iomem *regs = s3c_irq_uart_base(irq);
-	unsigned int bit = s3c_irq_uart_bit(irq);
-	u32 reg;
-
-	reg = __raw_readl(regs + S3C64XX_UINTM);
-	reg |= (1 << bit);
-	__raw_writel(reg, regs + S3C64XX_UINTM);
-}
-
-static void s3c_irq_uart_maskack(unsigned int irq)
-{
-	void __iomem *regs = s3c_irq_uart_base(irq);
-	unsigned int bit = s3c_irq_uart_bit(irq);
-	u32 reg;
-
-	reg = __raw_readl(regs + S3C64XX_UINTM);
-	reg |= (1 << bit);
-	__raw_writel(reg, regs + S3C64XX_UINTM);
-	__raw_writel(1 << bit, regs + S3C64XX_UINTP);
-}
-
-static void s3c_irq_uart_unmask(unsigned int irq)
-{
-	void __iomem *regs = s3c_irq_uart_base(irq);
-	unsigned int bit = s3c_irq_uart_bit(irq);
-	u32 reg;
-
-	reg = __raw_readl(regs + S3C64XX_UINTM);
-	reg &= ~(1 << bit);
-	__raw_writel(reg, regs + S3C64XX_UINTM);
-}
-
-static void s3c_irq_uart_ack(unsigned int irq)
-{
-	void __iomem *regs = s3c_irq_uart_base(irq);
-	unsigned int bit = s3c_irq_uart_bit(irq);
-
-	__raw_writel(1 << bit, regs + S3C64XX_UINTP);
-}
-
-static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc)
-{
-	struct uart_irq *uirq = &uart_irqs[irq - IRQ_UART0];
-	u32 pend = __raw_readl(uirq->regs + S3C64XX_UINTP);
-	int base = uirq->base_irq;
-
-	if (pend & (1 << 0))
-		generic_handle_irq(base);
-	if (pend & (1 << 1))
-		generic_handle_irq(base + 1);
-	if (pend & (1 << 2))
-		generic_handle_irq(base + 2);
-	if (pend & (1 << 3))
-		generic_handle_irq(base + 3);
-}
-
-static struct irq_chip s3c_irq_uart = {
-	.name		= "s3c-uart",
-	.mask		= s3c_irq_uart_mask,
-	.unmask		= s3c_irq_uart_unmask,
-	.mask_ack	= s3c_irq_uart_maskack,
-	.ack		= s3c_irq_uart_ack,
-};
-
-static void __init s3c64xx_uart_irq(struct uart_irq *uirq)
-{
-	void __iomem *reg_base = uirq->regs;
-	unsigned int irq;
-	int offs;
-
-	/* mask all interrupts at the start. */
-	__raw_writel(0xf, reg_base + S3C64XX_UINTM);
-
-	for (offs = 0; offs < 3; offs++) {
-		irq = uirq->base_irq + offs;
-
-		set_irq_chip(irq, &s3c_irq_uart);
-		set_irq_chip_data(irq, uirq);
-		set_irq_handler(irq, handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-
-	set_irq_chained_handler(uirq->parent_irq, s3c_irq_demux_uart);
-}
-
-void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
-{
-	int uart, irq;
-
-	printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
-
-	/* initialise the pair of VICs */
-	vic_init(S3C_VA_VIC0, S3C_VIC0_BASE, vic0_valid, 0);
-	vic_init(S3C_VA_VIC1, S3C_VIC1_BASE, vic1_valid, 0);
-
-	/* add the timer sub-irqs */
-
-	set_irq_chained_handler(IRQ_TIMER0_VIC, s3c_irq_demux_timer0);
-	set_irq_chained_handler(IRQ_TIMER1_VIC, s3c_irq_demux_timer1);
-	set_irq_chained_handler(IRQ_TIMER2_VIC, s3c_irq_demux_timer2);
-	set_irq_chained_handler(IRQ_TIMER3_VIC, s3c_irq_demux_timer3);
-	set_irq_chained_handler(IRQ_TIMER4_VIC, s3c_irq_demux_timer4);
-
-	for (irq = IRQ_TIMER0; irq <= IRQ_TIMER4; irq++) {
-		set_irq_chip(irq, &s3c_irq_timer);
-		set_irq_handler(irq, handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-
-	for (uart = 0; uart < ARRAY_SIZE(uart_irqs); uart++)
-		s3c64xx_uart_irq(&uart_irqs[uart]);
-}
-
-
diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c
deleted file mode 100644
index ffd56deb9e81..000000000000
--- a/arch/arm/plat-s3c64xx/s3c6400-clock.c
+++ /dev/null
@@ -1,758 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/s3c6400-clock.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C6400 based common clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/sysdev.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/cpu-freq.h>
-
-#include <plat/regs-clock.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-
-/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
- * ext_xtal_mux for want of an actual name from the manual.
-*/
-
-static struct clk clk_ext_xtal_mux = {
-	.name		= "ext_xtal",
-	.id		= -1,
-};
-
-#define clk_fin_apll clk_ext_xtal_mux
-#define clk_fin_mpll clk_ext_xtal_mux
-#define clk_fin_epll clk_ext_xtal_mux
-
-#define clk_fout_mpll	clk_mpll
-#define clk_fout_epll	clk_epll
-
-struct clk_sources {
-	unsigned int	nr_sources;
-	struct clk	**sources;
-};
-
-struct clksrc_clk {
-	struct clk		clk;
-	unsigned int		mask;
-	unsigned int		shift;
-
-	struct clk_sources	*sources;
-
-	unsigned int		divider_shift;
-	void __iomem		*reg_divider;
-};
-
-static struct clk clk_fout_apll = {
-	.name		= "fout_apll",
-	.id		= -1,
-};
-
-static struct clk *clk_src_apll_list[] = {
-	[0] = &clk_fin_apll,
-	[1] = &clk_fout_apll,
-};
-
-static struct clk_sources clk_src_apll = {
-	.sources	= clk_src_apll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_apll_list),
-};
-
-static struct clksrc_clk clk_mout_apll = {
-	.clk	= {
-		.name		= "mout_apll",
-		.id		= -1,
-	},
-	.shift		= S3C6400_CLKSRC_APLL_MOUT_SHIFT,
-	.mask		= S3C6400_CLKSRC_APLL_MOUT,
-	.sources	= &clk_src_apll,
-};
-
-static struct clk *clk_src_epll_list[] = {
-	[0] = &clk_fin_epll,
-	[1] = &clk_fout_epll,
-};
-
-static struct clk_sources clk_src_epll = {
-	.sources	= clk_src_epll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_epll_list),
-};
-
-static struct clksrc_clk clk_mout_epll = {
-	.clk	= {
-		.name		= "mout_epll",
-		.id		= -1,
-	},
-	.shift		= S3C6400_CLKSRC_EPLL_MOUT_SHIFT,
-	.mask		= S3C6400_CLKSRC_EPLL_MOUT,
-	.sources	= &clk_src_epll,
-};
-
-static struct clk *clk_src_mpll_list[] = {
-	[0] = &clk_fin_mpll,
-	[1] = &clk_fout_mpll,
-};
-
-static struct clk_sources clk_src_mpll = {
-	.sources	= clk_src_mpll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_mpll_list),
-};
-
-static struct clksrc_clk clk_mout_mpll = {
-	.clk = {
-		.name		= "mout_mpll",
-		.id		= -1,
-	},
-	.shift		= S3C6400_CLKSRC_MPLL_MOUT_SHIFT,
-	.mask		= S3C6400_CLKSRC_MPLL_MOUT,
-	.sources	= &clk_src_mpll,
-};
-
-static unsigned int armclk_mask;
-
-static unsigned long s3c64xx_clk_arm_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	u32 clkdiv;
-
-	/* divisor mask starts at bit0, so no need to shift */
-	clkdiv = __raw_readl(S3C_CLK_DIV0) & armclk_mask;
-
-	return rate / (clkdiv + 1);
-}
-
-static unsigned long s3c64xx_clk_arm_round_rate(struct clk *clk,
-						unsigned long rate)
-{
-	unsigned long parent = clk_get_rate(clk->parent);
-	u32 div;
-
-	if (parent < rate)
-		return parent;
-
-	div = (parent / rate) - 1;
-	if (div > armclk_mask)
-		div = armclk_mask;
-
-	return parent / (div + 1);
-}
-
-static int s3c64xx_clk_arm_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent = clk_get_rate(clk->parent);
-	u32 div;
-	u32 val;
-
-	if (rate < parent / (armclk_mask + 1))
-		return -EINVAL;
-
-	rate = clk_round_rate(clk, rate);
-	div = clk_get_rate(clk->parent) / rate;
-
-	val = __raw_readl(S3C_CLK_DIV0);
-	val &= ~armclk_mask;
-	val |= (div - 1);
-	__raw_writel(val, S3C_CLK_DIV0);
-
-	return 0;
-
-}
-
-static struct clk clk_arm = {
-	.name		= "armclk",
-	.id		= -1,
-	.parent		= &clk_mout_apll.clk,
-	.get_rate	= s3c64xx_clk_arm_get_rate,
-	.set_rate	= s3c64xx_clk_arm_set_rate,
-	.round_rate	= s3c64xx_clk_arm_round_rate,
-};
-
-static unsigned long s3c64xx_clk_doutmpll_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-
-	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
-	if (__raw_readl(S3C_CLK_DIV0) & S3C6400_CLKDIV0_MPLL_MASK)
-		rate /= 2;
-
-	return rate;
-}
-
-static struct clk clk_dout_mpll = {
-	.name		= "dout_mpll",
-	.id		= -1,
-	.parent		= &clk_mout_mpll.clk,
-	.get_rate	= s3c64xx_clk_doutmpll_get_rate,
-};
-
-static struct clk *clkset_spi_mmc_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	&clk_fin_epll,
-	&clk_27m,
-};
-
-static struct clk_sources clkset_spi_mmc = {
-	.sources	= clkset_spi_mmc_list,
-	.nr_sources	= ARRAY_SIZE(clkset_spi_mmc_list),
-};
-
-static struct clk *clkset_irda_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	NULL,
-	&clk_27m,
-};
-
-static struct clk_sources clkset_irda = {
-	.sources	= clkset_irda_list,
-	.nr_sources	= ARRAY_SIZE(clkset_irda_list),
-};
-
-static struct clk *clkset_uart_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	NULL,
-	NULL
-};
-
-static struct clk_sources clkset_uart = {
-	.sources	= clkset_uart_list,
-	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
-};
-
-static struct clk *clkset_uhost_list[] = {
-	&clk_48m,
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	&clk_fin_epll,
-};
-
-static struct clk_sources clkset_uhost = {
-	.sources	= clkset_uhost_list,
-	.nr_sources	= ARRAY_SIZE(clkset_uhost_list),
-};
-
-
-/* The peripheral clocks are all controlled via clocksource followed
- * by an optional divider and gate stage. We currently roll this into
- * one clock which hides the intermediate clock from the mux.
- *
- * Note, the JPEG clock can only be an even divider...
- *
- * The scaler and LCD clocks depend on the S3C64XX version, and also
- * have a common parent divisor so are not included here.
- */
-
-static inline struct clksrc_clk *to_clksrc(struct clk *clk)
-{
-	return container_of(clk, struct clksrc_clk, clk);
-}
-
-static unsigned long s3c64xx_getrate_clksrc(struct clk *clk)
-{
-	struct clksrc_clk *sclk = to_clksrc(clk);
-	unsigned long rate = clk_get_rate(clk->parent);
-	u32 clkdiv = __raw_readl(sclk->reg_divider);
-
-	clkdiv >>= sclk->divider_shift;
-	clkdiv &= 0xf;
-	clkdiv++;
-
-	rate /= clkdiv;
-	return rate;
-}
-
-static int s3c64xx_setrate_clksrc(struct clk *clk, unsigned long rate)
-{
-	struct clksrc_clk *sclk = to_clksrc(clk);
-	void __iomem *reg = sclk->reg_divider;
-	unsigned int div;
-	u32 val;
-
-	rate = clk_round_rate(clk, rate);
-	div = clk_get_rate(clk->parent) / rate;
-	if (div > 16)
-		return -EINVAL;
-
-	val = __raw_readl(reg);
-	val &= ~(0xf << sclk->divider_shift);
-	val |= (div - 1) << sclk->divider_shift;
-	__raw_writel(val, reg);
-
-	return 0;
-}
-
-static int s3c64xx_setparent_clksrc(struct clk *clk, struct clk *parent)
-{
-	struct clksrc_clk *sclk = to_clksrc(clk);
-	struct clk_sources *srcs = sclk->sources;
-	u32 clksrc = __raw_readl(S3C_CLK_SRC);
-	int src_nr = -1;
-	int ptr;
-
-	for (ptr = 0; ptr < srcs->nr_sources; ptr++)
-		if (srcs->sources[ptr] == parent) {
-			src_nr = ptr;
-			break;
-		}
-
-	if (src_nr >= 0) {
-		clksrc &= ~sclk->mask;
-		clksrc |= src_nr << sclk->shift;
-
-		__raw_writel(clksrc, S3C_CLK_SRC);
-
-		clk->parent = parent;
-		return 0;
-	}
-
-	return -EINVAL;
-}
-
-static unsigned long s3c64xx_roundrate_clksrc(struct clk *clk,
-					      unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	int div;
-
-	if (rate > parent_rate)
-		rate = parent_rate;
-	else {
-		div = parent_rate / rate;
-
-		if (div == 0)
-			div = 1;
-		if (div > 16)
-			div = 16;
-
-		rate = parent_rate / div;
-	}
-
-	return rate;
-}
-
-static struct clksrc_clk clk_mmc0 = {
-	.clk	= {
-		.name		= "mmc_bus",
-		.id		= 0,
-		.ctrlbit        = S3C_CLKCON_SCLK_MMC0,
-		.enable		= s3c64xx_sclk_ctrl,
-		.set_parent	= s3c64xx_setparent_clksrc,
-		.get_rate	= s3c64xx_getrate_clksrc,
-		.set_rate	= s3c64xx_setrate_clksrc,
-		.round_rate	= s3c64xx_roundrate_clksrc,
-	},
-	.shift		= S3C6400_CLKSRC_MMC0_SHIFT,
-	.mask		= S3C6400_CLKSRC_MMC0_MASK,
-	.sources	= &clkset_spi_mmc,
-	.divider_shift	= S3C6400_CLKDIV1_MMC0_SHIFT,
-	.reg_divider	= S3C_CLK_DIV1,
-};
-
-static struct clksrc_clk clk_mmc1 = {
-	.clk	= {
-		.name		= "mmc_bus",
-		.id		= 1,
-		.ctrlbit        = S3C_CLKCON_SCLK_MMC1,
-		.enable		= s3c64xx_sclk_ctrl,
-		.get_rate	= s3c64xx_getrate_clksrc,
-		.set_rate	= s3c64xx_setrate_clksrc,
-		.set_parent	= s3c64xx_setparent_clksrc,
-		.round_rate	= s3c64xx_roundrate_clksrc,
-	},
-	.shift		= S3C6400_CLKSRC_MMC1_SHIFT,
-	.mask		= S3C6400_CLKSRC_MMC1_MASK,
-	.sources	= &clkset_spi_mmc,
-	.divider_shift	= S3C6400_CLKDIV1_MMC1_SHIFT,
-	.reg_divider	= S3C_CLK_DIV1,
-};
-
-static struct clksrc_clk clk_mmc2 = {
-	.clk	= {
-		.name		= "mmc_bus",
-		.id		= 2,
-		.ctrlbit        = S3C_CLKCON_SCLK_MMC2,
-		.enable		= s3c64xx_sclk_ctrl,
-		.get_rate	= s3c64xx_getrate_clksrc,
-		.set_rate	= s3c64xx_setrate_clksrc,
-		.set_parent	= s3c64xx_setparent_clksrc,
-		.round_rate	= s3c64xx_roundrate_clksrc,
-	},
-	.shift		= S3C6400_CLKSRC_MMC2_SHIFT,
-	.mask		= S3C6400_CLKSRC_MMC2_MASK,
-	.sources	= &clkset_spi_mmc,
-	.divider_shift	= S3C6400_CLKDIV1_MMC2_SHIFT,
-	.reg_divider	= S3C_CLK_DIV1,
-};
-
-static struct clksrc_clk clk_usbhost = {
-	.clk	= {
-		.name		= "usb-bus-host",
-		.id		= -1,
-		.ctrlbit        = S3C_CLKCON_SCLK_UHOST,
-		.enable		= s3c64xx_sclk_ctrl,
-		.set_parent	= s3c64xx_setparent_clksrc,
-		.get_rate	= s3c64xx_getrate_clksrc,
-		.set_rate	= s3c64xx_setrate_clksrc,
-		.round_rate	= s3c64xx_roundrate_clksrc,
-	},
-	.shift		= S3C6400_CLKSRC_UHOST_SHIFT,
-	.mask		= S3C6400_CLKSRC_UHOST_MASK,
-	.sources	= &clkset_uhost,
-	.divider_shift	= S3C6400_CLKDIV1_UHOST_SHIFT,
-	.reg_divider	= S3C_CLK_DIV1,
-};
-
-static struct clksrc_clk clk_uart_uclk1 = {
-	.clk	= {
-		.name		= "uclk1",
-		.id		= -1,
-		.ctrlbit        = S3C_CLKCON_SCLK_UART,
-		.enable		= s3c64xx_sclk_ctrl,
-		.set_parent	= s3c64xx_setparent_clksrc,
-		.get_rate	= s3c64xx_getrate_clksrc,
-		.set_rate	= s3c64xx_setrate_clksrc,
-		.round_rate	= s3c64xx_roundrate_clksrc,
-	},
-	.shift		= S3C6400_CLKSRC_UART_SHIFT,
-	.mask		= S3C6400_CLKSRC_UART_MASK,
-	.sources	= &clkset_uart,
-	.divider_shift	= S3C6400_CLKDIV2_UART_SHIFT,
-	.reg_divider	= S3C_CLK_DIV2,
-};
-
-/* Where does UCLK0 come from? */
-
-static struct clksrc_clk clk_spi0 = {
-	.clk	= {
-		.name		= "spi-bus",
-		.id		= 0,
-		.ctrlbit        = S3C_CLKCON_SCLK_SPI0,
-		.enable		= s3c64xx_sclk_ctrl,
-		.set_parent	= s3c64xx_setparent_clksrc,
-		.get_rate	= s3c64xx_getrate_clksrc,
-		.set_rate	= s3c64xx_setrate_clksrc,
-		.round_rate	= s3c64xx_roundrate_clksrc,
-	},
-	.shift		= S3C6400_CLKSRC_SPI0_SHIFT,
-	.mask		= S3C6400_CLKSRC_SPI0_MASK,
-	.sources	= &clkset_spi_mmc,
-	.divider_shift	= S3C6400_CLKDIV2_SPI0_SHIFT,
-	.reg_divider	= S3C_CLK_DIV2,
-};
-
-static struct clksrc_clk clk_spi1 = {
-	.clk	= {
-		.name		= "spi-bus",
-		.id		= 1,
-		.ctrlbit        = S3C_CLKCON_SCLK_SPI1,
-		.enable		= s3c64xx_sclk_ctrl,
-		.set_parent	= s3c64xx_setparent_clksrc,
-		.get_rate	= s3c64xx_getrate_clksrc,
-		.set_rate	= s3c64xx_setrate_clksrc,
-		.round_rate	= s3c64xx_roundrate_clksrc,
-	},
-	.shift		= S3C6400_CLKSRC_SPI1_SHIFT,
-	.mask		= S3C6400_CLKSRC_SPI1_MASK,
-	.sources	= &clkset_spi_mmc,
-	.divider_shift	= S3C6400_CLKDIV2_SPI1_SHIFT,
-	.reg_divider	= S3C_CLK_DIV2,
-};
-
-static struct clk clk_iis_cd0 = {
-	.name		= "iis_cdclk0",
-	.id		= -1,
-};
-
-static struct clk clk_iis_cd1 = {
-	.name		= "iis_cdclk1",
-	.id		= -1,
-};
-
-static struct clk clk_pcm_cd = {
-	.name		= "pcm_cdclk",
-	.id		= -1,
-};
-
-static struct clk *clkset_audio0_list[] = {
-	[0] = &clk_mout_epll.clk,
-	[1] = &clk_dout_mpll,
-	[2] = &clk_fin_epll,
-	[3] = &clk_iis_cd0,
-	[4] = &clk_pcm_cd,
-};
-
-static struct clk_sources clkset_audio0 = {
-	.sources	= clkset_audio0_list,
-	.nr_sources	= ARRAY_SIZE(clkset_audio0_list),
-};
-
-static struct clksrc_clk clk_audio0 = {
-	.clk	= {
-		.name		= "audio-bus",
-		.id		= 0,
-		.ctrlbit        = S3C_CLKCON_SCLK_AUDIO0,
-		.enable		= s3c64xx_sclk_ctrl,
-		.set_parent	= s3c64xx_setparent_clksrc,
-		.get_rate	= s3c64xx_getrate_clksrc,
-		.set_rate	= s3c64xx_setrate_clksrc,
-		.round_rate	= s3c64xx_roundrate_clksrc,
-	},
-	.shift		= S3C6400_CLKSRC_AUDIO0_SHIFT,
-	.mask		= S3C6400_CLKSRC_AUDIO0_MASK,
-	.sources	= &clkset_audio0,
-	.divider_shift	= S3C6400_CLKDIV2_AUDIO0_SHIFT,
-	.reg_divider	= S3C_CLK_DIV2,
-};
-
-static struct clk *clkset_audio1_list[] = {
-	[0] = &clk_mout_epll.clk,
-	[1] = &clk_dout_mpll,
-	[2] = &clk_fin_epll,
-	[3] = &clk_iis_cd1,
-	[4] = &clk_pcm_cd,
-};
-
-static struct clk_sources clkset_audio1 = {
-	.sources	= clkset_audio1_list,
-	.nr_sources	= ARRAY_SIZE(clkset_audio1_list),
-};
-
-static struct clksrc_clk clk_audio1 = {
-	.clk	= {
-		.name		= "audio-bus",
-		.id		= 1,
-		.ctrlbit        = S3C_CLKCON_SCLK_AUDIO1,
-		.enable		= s3c64xx_sclk_ctrl,
-		.set_parent	= s3c64xx_setparent_clksrc,
-		.get_rate	= s3c64xx_getrate_clksrc,
-		.set_rate	= s3c64xx_setrate_clksrc,
-		.round_rate	= s3c64xx_roundrate_clksrc,
-	},
-	.shift		= S3C6400_CLKSRC_AUDIO1_SHIFT,
-	.mask		= S3C6400_CLKSRC_AUDIO1_MASK,
-	.sources	= &clkset_audio1,
-	.divider_shift	= S3C6400_CLKDIV2_AUDIO1_SHIFT,
-	.reg_divider	= S3C_CLK_DIV2,
-};
-
-static struct clksrc_clk clk_irda = {
-	.clk	= {
-		.name		= "irda-bus",
-		.id		= 0,
-		.ctrlbit        = S3C_CLKCON_SCLK_IRDA,
-		.enable		= s3c64xx_sclk_ctrl,
-		.set_parent	= s3c64xx_setparent_clksrc,
-		.get_rate	= s3c64xx_getrate_clksrc,
-		.set_rate	= s3c64xx_setrate_clksrc,
-		.round_rate	= s3c64xx_roundrate_clksrc,
-	},
-	.shift		= S3C6400_CLKSRC_IRDA_SHIFT,
-	.mask		= S3C6400_CLKSRC_IRDA_MASK,
-	.sources	= &clkset_irda,
-	.divider_shift	= S3C6400_CLKDIV2_IRDA_SHIFT,
-	.reg_divider	= S3C_CLK_DIV2,
-};
-
-static struct clk *clkset_camif_list[] = {
-	&clk_h2,
-};
-
-static struct clk_sources clkset_camif = {
-	.sources	= clkset_camif_list,
-	.nr_sources	= ARRAY_SIZE(clkset_camif_list),
-};
-
-static struct clksrc_clk clk_camif = {
-	.clk	= {
-		.name		= "camera",
-		.id		= -1,
-		.ctrlbit        = S3C_CLKCON_SCLK_CAM,
-		.enable		= s3c64xx_sclk_ctrl,
-		.set_parent	= s3c64xx_setparent_clksrc,
-		.get_rate	= s3c64xx_getrate_clksrc,
-		.set_rate	= s3c64xx_setrate_clksrc,
-		.round_rate	= s3c64xx_roundrate_clksrc,
-	},
-	.shift		= 0,
-	.mask		= 0,
-	.sources	= &clkset_camif,
-	.divider_shift	= S3C6400_CLKDIV0_CAM_SHIFT,
-	.reg_divider	= S3C_CLK_DIV0,
-};
-
-/* Clock initialisation code */
-
-static struct clksrc_clk *init_parents[] = {
-	&clk_mout_apll,
-	&clk_mout_epll,
-	&clk_mout_mpll,
-	&clk_mmc0,
-	&clk_mmc1,
-	&clk_mmc2,
-	&clk_usbhost,
-	&clk_uart_uclk1,
-	&clk_spi0,
-	&clk_spi1,
-	&clk_audio0,
-	&clk_audio1,
-	&clk_irda,
-	&clk_camif,
-};
-
-static void __init_or_cpufreq s3c6400_set_clksrc(struct clksrc_clk *clk)
-{
-	struct clk_sources *srcs = clk->sources;
-	u32 clksrc = __raw_readl(S3C_CLK_SRC);
-
-	clksrc &= clk->mask;
-	clksrc >>= clk->shift;
-
-	if (clksrc > srcs->nr_sources || !srcs->sources[clksrc]) {
-		printk(KERN_ERR "%s: bad source %d\n",
-		       clk->clk.name, clksrc);
-		return;
-	}
-
-	clk->clk.parent = srcs->sources[clksrc];
-
-	printk(KERN_INFO "%s: source is %s (%d), rate is %ld\n",
-	       clk->clk.name, clk->clk.parent->name, clksrc,
-	       clk_get_rate(&clk->clk));
-}
-
-#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
-
-void __init_or_cpufreq s3c6400_setup_clocks(void)
-{
-	struct clk *xtal_clk;
-	unsigned long xtal;
-	unsigned long fclk;
-	unsigned long hclk;
-	unsigned long hclk2;
-	unsigned long pclk;
-	unsigned long epll;
-	unsigned long apll;
-	unsigned long mpll;
-	unsigned int ptr;
-	u32 clkdiv0;
-
-	printk(KERN_DEBUG "%s: registering clocks\n", __func__);
-
-	clkdiv0 = __raw_readl(S3C_CLK_DIV0);
-	printk(KERN_DEBUG "%s: clkdiv0 = %08x\n", __func__, clkdiv0);
-
-	xtal_clk = clk_get(NULL, "xtal");
-	BUG_ON(IS_ERR(xtal_clk));
-
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
-
-	/* For now assume the mux always selects the crystal */
-	clk_ext_xtal_mux.parent = xtal_clk;
-
-	epll = s3c6400_get_epll(xtal);
-	mpll = s3c6400_get_pll(xtal, __raw_readl(S3C_MPLL_CON));
-	apll = s3c6400_get_pll(xtal, __raw_readl(S3C_APLL_CON));
-
-	fclk = mpll;
-
-	printk(KERN_INFO "S3C64XX: PLL settings, A=%ld, M=%ld, E=%ld\n",
-	       apll, mpll, epll);
-
-	hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
-	hclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK);
-	pclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_PCLK);
-
-	printk(KERN_INFO "S3C64XX: HCLK2=%ld, HCLK=%ld, PCLK=%ld\n",
-	       hclk2, hclk, pclk);
-
-	clk_fout_mpll.rate = mpll;
-	clk_fout_epll.rate = epll;
-	clk_fout_apll.rate = apll;
-
-	clk_h2.rate = hclk2;
-	clk_h.rate = hclk;
-	clk_p.rate = pclk;
-	clk_f.rate = fclk;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
-		s3c6400_set_clksrc(init_parents[ptr]);
-}
-
-static struct clk *clks[] __initdata = {
-	&clk_ext_xtal_mux,
-	&clk_iis_cd0,
-	&clk_iis_cd1,
-	&clk_pcm_cd,
-	&clk_mout_epll.clk,
-	&clk_mout_mpll.clk,
-	&clk_dout_mpll,
-	&clk_mmc0.clk,
-	&clk_mmc1.clk,
-	&clk_mmc2.clk,
-	&clk_usbhost.clk,
-	&clk_uart_uclk1.clk,
-	&clk_spi0.clk,
-	&clk_spi1.clk,
-	&clk_audio0.clk,
-	&clk_audio1.clk,
-	&clk_irda.clk,
-	&clk_camif.clk,
-	&clk_arm,
-};
-
-/**
- * s3c6400_register_clocks - register clocks for s3c6400 and above
- * @armclk_divlimit: Divisor mask for ARMCLK
- *
- * Register the clocks for the S3C6400 and above SoC range, such
- * as ARMCLK and the clocks which have divider chains attached.
- *
- * This call does not setup the clocks, which is left to the
- * s3c6400_setup_clocks() call which may be needed by the cpufreq
- * or resume code to re-set the clocks if the bootloader has changed
- * them.
- */
-void __init s3c6400_register_clocks(unsigned armclk_divlimit)
-{
-	struct clk *clkp;
-	int ret;
-	int ptr;
-
-	armclk_mask = armclk_divlimit;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
-		clkp = clks[ptr];
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-	}
-}
diff --git a/arch/arm/plat-s3c64xx/s3c6400-init.c b/arch/arm/plat-s3c64xx/s3c6400-init.c
deleted file mode 100644
index 6c28f39df097..000000000000
--- a/arch/arm/plat-s3c64xx/s3c6400-init.c
+++ /dev/null
@@ -1,29 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/s3c6400-init.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C6400 - CPU initialisation (common with other S3C64XX chips)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/s3c6400.h>
-#include <plat/s3c6410.h>
-
-/* uart registration process */
-
-void __init s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no);
-}
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
new file mode 100644
index 000000000000..d400a6a20fe4
--- /dev/null
+++ b/arch/arm/plat-s5p/Kconfig
@@ -0,0 +1,25 @@
+# arch/arm/plat-s5p/Kconfig
+#
+# Copyright (c) 2009 Samsung Electronics Co., Ltd.
+#		http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+config PLAT_S5P
+	bool
+	depends on (ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PV210)
+	default y
+	select ARM_VIC
+	select NO_IOPORT
+	select ARCH_REQUIRE_GPIOLIB
+	select S3C_GPIO_TRACK
+	select SAMSUNG_GPIOLIB_4BIT
+	select S3C_GPIO_CFG_S3C64XX
+	select S3C_GPIO_PULL_UPDOWN
+	select S3C_GPIO_CFG_S3C24XX
+	select PLAT_SAMSUNG
+	select SAMSUNG_CLKSRC
+	select SAMSUNG_IRQ_VIC_TIMER
+	select SAMSUNG_IRQ_UART
+	help
+	  Base platform code for Samsung's S5P series SoC.
diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile
new file mode 100644
index 000000000000..a7c54b332d27
--- /dev/null
+++ b/arch/arm/plat-s5p/Makefile
@@ -0,0 +1,19 @@
+# arch/arm/plat-s5p/Makefile
+#
+# Copyright (c) 2009 Samsung Electronics Co., Ltd.
+# 		http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:= dummy.o
+obj-				:=
+
+# Core files
+
+obj-y				+= dev-uart.o
+obj-y				+= cpu.o
+obj-y				+= clock.o
+obj-y				+= irq.o
+obj-y				+= setup-i2c0.o
diff --git a/arch/arm/plat-s5p/clock.c b/arch/arm/plat-s5p/clock.c
new file mode 100644
index 000000000000..aa96e335073b
--- /dev/null
+++ b/arch/arm/plat-s5p/clock.c
@@ -0,0 +1,149 @@
+/* linux/arch/arm/plat-s5p/clock.c
+ *
+ * Copyright 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P - Common clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+#include <asm/div64.h>
+
+#include <plat/clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/s5p-clock.h>
+
+/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
+ * clk_ext_xtal_mux.
+*/
+struct clk clk_ext_xtal_mux = {
+	.name		= "ext_xtal",
+	.id		= -1,
+};
+
+static struct clk s5p_clk_27m = {
+	.name		= "clk_27m",
+	.id		= -1,
+	.rate		= 27000000,
+};
+
+/* 48MHz USB Phy clock output */
+struct clk clk_48m = {
+	.name		= "clk_48m",
+	.id		= -1,
+	.rate		= 48000000,
+};
+
+/* APLL clock output
+ * No need .ctrlbit, this is always on
+*/
+struct clk clk_fout_apll = {
+	.name		= "fout_apll",
+	.id		= -1,
+};
+
+/* MPLL clock output
+ * No need .ctrlbit, this is always on
+*/
+struct clk clk_fout_mpll = {
+	.name		= "fout_mpll",
+	.id		= -1,
+};
+
+/* EPLL clock output */
+struct clk clk_fout_epll = {
+	.name		= "fout_epll",
+	.id		= -1,
+	.ctrlbit	= (1 << 31),
+};
+
+/* ARM clock */
+struct clk clk_arm = {
+	.name		= "armclk",
+	.id		= -1,
+	.rate		= 0,
+	.ctrlbit	= 0,
+};
+
+/* Possible clock sources for APLL Mux */
+static struct clk *clk_src_apll_list[] = {
+	[0] = &clk_fin_apll,
+	[1] = &clk_fout_apll,
+};
+
+struct clksrc_sources clk_src_apll = {
+	.sources	= clk_src_apll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_apll_list),
+};
+
+/* Possible clock sources for MPLL Mux */
+static struct clk *clk_src_mpll_list[] = {
+	[0] = &clk_fin_mpll,
+	[1] = &clk_fout_mpll,
+};
+
+struct clksrc_sources clk_src_mpll = {
+	.sources	= clk_src_mpll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_mpll_list),
+};
+
+/* Possible clock sources for EPLL Mux */
+static struct clk *clk_src_epll_list[] = {
+	[0] = &clk_fin_epll,
+	[1] = &clk_fout_epll,
+};
+
+struct clksrc_sources clk_src_epll = {
+	.sources	= clk_src_epll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_epll_list),
+};
+
+struct clk clk_vpll = {
+	.name		= "vpll",
+	.id		= -1,
+};
+
+int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable)
+{
+	unsigned int ctrlbit = clk->ctrlbit;
+	u32 con;
+
+	con = __raw_readl(reg);
+	con = enable ? (con | ctrlbit) : (con & ~ctrlbit);
+	__raw_writel(con, reg);
+	return 0;
+}
+
+static struct clk *s5p_clks[] __initdata = {
+	&clk_ext_xtal_mux,
+	&clk_48m,
+	&s5p_clk_27m,
+	&clk_fout_apll,
+	&clk_fout_mpll,
+	&clk_fout_epll,
+	&clk_arm,
+	&clk_vpll,
+};
+
+void __init s5p_register_clocks(unsigned long xtal_freq)
+{
+	int ret;
+
+	clk_ext_xtal_mux.rate = xtal_freq;
+
+	ret = s3c24xx_register_clocks(s5p_clks, ARRAY_SIZE(s5p_clks));
+	if (ret > 0)
+		printk(KERN_ERR "Failed to register s5p clocks\n");
+}
diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c
new file mode 100644
index 000000000000..f92e5de3a755
--- /dev/null
+++ b/arch/arm/plat-s5p/cpu.c
@@ -0,0 +1,113 @@
+/* linux/arch/arm/plat-s5p/cpu.c
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P CPU Support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <mach/map.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/regs-clock.h>
+#include <plat/cpu.h>
+#include <plat/s5p6440.h>
+#include <plat/s5p6442.h>
+#include <plat/s5pv210.h>
+
+/* table of supported CPUs */
+
+static const char name_s5p6440[] = "S5P6440";
+static const char name_s5p6442[] = "S5P6442";
+static const char name_s5pv210[] = "S5PV210/S5PC110";
+
+static struct cpu_table cpu_ids[] __initdata = {
+	{
+		.idcode		= 0x56440100,
+		.idmask		= 0xffffff00,
+		.map_io		= s5p6440_map_io,
+		.init_clocks	= s5p6440_init_clocks,
+		.init_uarts	= s5p6440_init_uarts,
+		.init		= s5p6440_init,
+		.name		= name_s5p6440,
+	}, {
+		.idcode		= 0x36442000,
+		.idmask		= 0xffffff00,
+		.map_io		= s5p6442_map_io,
+		.init_clocks	= s5p6442_init_clocks,
+		.init_uarts	= s5p6442_init_uarts,
+		.init		= s5p6442_init,
+		.name		= name_s5p6442,
+	}, {
+		.idcode		= 0x43110000,
+		.idmask		= 0xfffff000,
+		.map_io		= s5pv210_map_io,
+		.init_clocks	= s5pv210_init_clocks,
+		.init_uarts	= s5pv210_init_uarts,
+		.init		= s5pv210_init,
+		.name		= name_s5pv210,
+	},
+};
+
+/* minimal IO mapping */
+
+static struct map_desc s5p_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5P_VA_CHIPID,
+		.pfn		= __phys_to_pfn(S5P_PA_CHIPID),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_SYS,
+		.pfn		= __phys_to_pfn(S5P_PA_SYSCON),
+		.length		= SZ_64K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_UART,
+		.pfn		= __phys_to_pfn(S3C_PA_UART),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC0,
+		.pfn		= __phys_to_pfn(S5P_PA_VIC0),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC1,
+		.pfn		= __phys_to_pfn(S5P_PA_VIC1),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_TIMER,
+		.pfn		= __phys_to_pfn(S5P_PA_TIMER),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_GPIO,
+		.pfn		= __phys_to_pfn(S5P_PA_GPIO),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
+/* read cpu identification code */
+
+void __init s5p_init_io(struct map_desc *mach_desc,
+			int size, void __iomem *cpuid_addr)
+{
+	unsigned long idcode;
+
+	/* initialize the io descriptors we need for initialization */
+	iotable_init(s5p_iodesc, ARRAY_SIZE(s5p_iodesc));
+	if (mach_desc)
+		iotable_init(mach_desc, size);
+
+	idcode = __raw_readl(cpuid_addr);
+	s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
+}
diff --git a/arch/arm/plat-s5p/dev-uart.c b/arch/arm/plat-s5p/dev-uart.c
new file mode 100644
index 000000000000..a89331ef4ae1
--- /dev/null
+++ b/arch/arm/plat-s5p/dev-uart.c
@@ -0,0 +1,139 @@
+/* linux/arch/arm/plat-s5p/dev-uart.c
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Base S5P UART resource and device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+ /* Serial port registrations */
+
+static struct resource s5p_uart0_resource[] = {
+	[0] = {
+		.start	= S5P_PA_UART0,
+		.end	= S5P_PA_UART0 + S5P_SZ_UART,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S5P_UART_RX0,
+		.end	= IRQ_S5P_UART_RX0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S5P_UART_TX0,
+		.end	= IRQ_S5P_UART_TX0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start	= IRQ_S5P_UART_ERR0,
+		.end	= IRQ_S5P_UART_ERR0,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct resource s5p_uart1_resource[] = {
+	[0] = {
+		.start	= S5P_PA_UART1,
+		.end	= S5P_PA_UART1 + S5P_SZ_UART,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S5P_UART_RX1,
+		.end	= IRQ_S5P_UART_RX1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S5P_UART_TX1,
+		.end	= IRQ_S5P_UART_TX1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start	= IRQ_S5P_UART_ERR1,
+		.end	= IRQ_S5P_UART_ERR1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource s5p_uart2_resource[] = {
+	[0] = {
+		.start	= S5P_PA_UART2,
+		.end	= S5P_PA_UART2 + S5P_SZ_UART,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S5P_UART_RX2,
+		.end	= IRQ_S5P_UART_RX2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S5P_UART_TX2,
+		.end	= IRQ_S5P_UART_TX2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start	= IRQ_S5P_UART_ERR2,
+		.end	= IRQ_S5P_UART_ERR2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource s5p_uart3_resource[] = {
+#if CONFIG_SERIAL_SAMSUNG_UARTS > 3
+	[0] = {
+		.start	= S5P_PA_UART3,
+		.end	= S5P_PA_UART3 + S5P_SZ_UART,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S5P_UART_RX3,
+		.end	= IRQ_S5P_UART_RX3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S5P_UART_TX3,
+		.end	= IRQ_S5P_UART_TX3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start	= IRQ_S5P_UART_ERR3,
+		.end	= IRQ_S5P_UART_ERR3,
+		.flags	= IORESOURCE_IRQ,
+	},
+#endif
+};
+
+struct s3c24xx_uart_resources s5p_uart_resources[] __initdata = {
+	[0] = {
+		.resources	= s5p_uart0_resource,
+		.nr_resources	= ARRAY_SIZE(s5p_uart0_resource),
+	},
+	[1] = {
+		.resources	= s5p_uart1_resource,
+		.nr_resources	= ARRAY_SIZE(s5p_uart1_resource),
+	},
+	[2] = {
+		.resources	= s5p_uart2_resource,
+		.nr_resources	= ARRAY_SIZE(s5p_uart2_resource),
+	},
+	[3] = {
+		.resources	= s5p_uart3_resource,
+		.nr_resources	= ARRAY_SIZE(s5p_uart3_resource),
+	},
+};
diff --git a/arch/arm/plat-s5p/include/plat/irqs.h b/arch/arm/plat-s5p/include/plat/irqs.h
new file mode 100644
index 000000000000..42e757f2e40c
--- /dev/null
+++ b/arch/arm/plat-s5p/include/plat/irqs.h
@@ -0,0 +1,90 @@
+/* linux/arch/arm/plat-s5p/include/plat/irqs.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P Common IRQ support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_S5P_IRQS_H
+#define __ASM_PLAT_S5P_IRQS_H __FILE__
+
+/* we keep the first set of CPU IRQs out of the range of
+ * the ISA space, so that the PC104 has them to itself
+ * and we don't end up having to do horrible things to the
+ * standard ISA drivers....
+ *
+ * note, since we're using the VICs, our start must be a
+ * mulitple of 32 to allow the common code to work
+ */
+
+#define S5P_IRQ_OFFSET		(32)
+
+#define S5P_IRQ(x)		((x) + S5P_IRQ_OFFSET)
+
+#define S5P_VIC0_BASE		S5P_IRQ(0)
+#define S5P_VIC1_BASE		S5P_IRQ(32)
+#define S5P_VIC2_BASE		S5P_IRQ(64)
+#define S5P_VIC3_BASE		S5P_IRQ(96)
+
+#define VIC_BASE(x)		(S5P_VIC0_BASE + ((x)*32))
+
+#define IRQ_VIC0_BASE		S5P_VIC0_BASE
+#define IRQ_VIC1_BASE		S5P_VIC1_BASE
+#define IRQ_VIC2_BASE		S5P_VIC2_BASE
+
+/* UART interrupts, each UART has 4 intterupts per channel so
+ * use the space between the ISA and S3C main interrupts. Note, these
+ * are not in the same order as the S3C24XX series! */
+
+#define IRQ_S5P_UART_BASE0	(16)
+#define IRQ_S5P_UART_BASE1	(20)
+#define IRQ_S5P_UART_BASE2	(24)
+#define IRQ_S5P_UART_BASE3	(28)
+
+#define UART_IRQ_RXD		(0)
+#define UART_IRQ_ERR		(1)
+#define UART_IRQ_TXD		(2)
+
+#define IRQ_S5P_UART_RX0	(IRQ_S5P_UART_BASE0 + UART_IRQ_RXD)
+#define IRQ_S5P_UART_TX0	(IRQ_S5P_UART_BASE0 + UART_IRQ_TXD)
+#define IRQ_S5P_UART_ERR0	(IRQ_S5P_UART_BASE0 + UART_IRQ_ERR)
+
+#define IRQ_S5P_UART_RX1	(IRQ_S5P_UART_BASE1 + UART_IRQ_RXD)
+#define IRQ_S5P_UART_TX1	(IRQ_S5P_UART_BASE1 + UART_IRQ_TXD)
+#define IRQ_S5P_UART_ERR1	(IRQ_S5P_UART_BASE1 + UART_IRQ_ERR)
+
+#define IRQ_S5P_UART_RX2	(IRQ_S5P_UART_BASE2 + UART_IRQ_RXD)
+#define IRQ_S5P_UART_TX2	(IRQ_S5P_UART_BASE2 + UART_IRQ_TXD)
+#define IRQ_S5P_UART_ERR2	(IRQ_S5P_UART_BASE2 + UART_IRQ_ERR)
+
+#define IRQ_S5P_UART_RX3	(IRQ_S5P_UART_BASE3 + UART_IRQ_RXD)
+#define IRQ_S5P_UART_TX3	(IRQ_S5P_UART_BASE3 + UART_IRQ_TXD)
+#define IRQ_S5P_UART_ERR3	(IRQ_S5P_UART_BASE3 + UART_IRQ_ERR)
+
+/* S3C compatibilty defines */
+#define IRQ_S3CUART_RX0		IRQ_S5P_UART_RX0
+#define IRQ_S3CUART_RX1		IRQ_S5P_UART_RX1
+#define IRQ_S3CUART_RX2		IRQ_S5P_UART_RX2
+#define IRQ_S3CUART_RX3		IRQ_S5P_UART_RX3
+
+/* VIC based IRQs */
+
+#define S5P_IRQ_VIC0(x)		(S5P_VIC0_BASE + (x))
+#define S5P_IRQ_VIC1(x)		(S5P_VIC1_BASE + (x))
+#define S5P_IRQ_VIC2(x)		(S5P_VIC2_BASE + (x))
+#define S5P_IRQ_VIC3(x)		(S5P_VIC3_BASE + (x))
+
+#define S5P_TIMER_IRQ(x)	S5P_IRQ(11 + (x))
+
+#define IRQ_TIMER0		S5P_TIMER_IRQ(0)
+#define IRQ_TIMER1		S5P_TIMER_IRQ(1)
+#define IRQ_TIMER2		S5P_TIMER_IRQ(2)
+#define IRQ_TIMER3		S5P_TIMER_IRQ(3)
+#define IRQ_TIMER4		S5P_TIMER_IRQ(4)
+
+#endif /* __ASM_PLAT_S5P_IRQS_H */
diff --git a/arch/arm/plat-s5p/include/plat/map-s5p.h b/arch/arm/plat-s5p/include/plat/map-s5p.h
new file mode 100644
index 000000000000..14828521f70c
--- /dev/null
+++ b/arch/arm/plat-s5p/include/plat/map-s5p.h
@@ -0,0 +1,34 @@
+/* linux/arch/arm/plat-s5p/include/plat/map-s5p.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_MAP_S5P_H
+#define __ASM_PLAT_MAP_S5P_H __FILE__
+
+#define S5P_VA_CHIPID		S3C_ADDR(0x00700000)
+#define S5P_VA_GPIO		S3C_ADDR(0x00500000)
+#define S5P_VA_SYSTIMER		S3C_ADDR(0x01200000)
+#define S5P_VA_SROMC		S3C_ADDR(0x01100000)
+
+#define S5P_VA_UART0		(S3C_VA_UART + 0x0)
+#define S5P_VA_UART1		(S3C_VA_UART + 0x400)
+#define S5P_VA_UART2		(S3C_VA_UART + 0x800)
+#define S5P_VA_UART3		(S3C_VA_UART + 0xC00)
+
+#define S3C_UART_OFFSET		(0x400)
+
+#define VA_VIC(x)		(S3C_VA_IRQ + ((x) * 0x10000))
+#define VA_VIC0			VA_VIC(0)
+#define VA_VIC1			VA_VIC(1)
+#define VA_VIC2			VA_VIC(2)
+#define VA_VIC3			VA_VIC(3)
+
+#endif /* __ASM_PLAT_MAP_S5P_H */
diff --git a/arch/arm/plat-s5p/include/plat/pll.h b/arch/arm/plat-s5p/include/plat/pll.h
new file mode 100644
index 000000000000..d48325bb29e2
--- /dev/null
+++ b/arch/arm/plat-s5p/include/plat/pll.h
@@ -0,0 +1,83 @@
+/* arch/arm/plat-s5p/include/plat/pll.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P PLL code
+ *
+ * Based on arch/arm/plat-s3c64xx/include/plat/pll.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define PLL45XX_MDIV_MASK	(0x3FF)
+#define PLL45XX_PDIV_MASK	(0x3F)
+#define PLL45XX_SDIV_MASK	(0x7)
+#define PLL45XX_MDIV_SHIFT	(16)
+#define PLL45XX_PDIV_SHIFT	(8)
+#define PLL45XX_SDIV_SHIFT	(0)
+
+#include <asm/div64.h>
+
+enum pll45xx_type_t {
+	pll_4500,
+	pll_4502,
+	pll_4508
+};
+
+static inline unsigned long s5p_get_pll45xx(unsigned long baseclk, u32 pll_con,
+					    enum pll45xx_type_t pll_type)
+{
+	u32 mdiv, pdiv, sdiv;
+	u64 fvco = baseclk;
+
+	mdiv = (pll_con >> PLL45XX_MDIV_SHIFT) & PLL45XX_MDIV_MASK;
+	pdiv = (pll_con >> PLL45XX_PDIV_SHIFT) & PLL45XX_PDIV_MASK;
+	sdiv = (pll_con >> PLL45XX_SDIV_SHIFT) & PLL45XX_SDIV_MASK;
+
+	if (pll_type == pll_4508)
+		sdiv = sdiv - 1;
+
+	fvco *= mdiv;
+	do_div(fvco, (pdiv << sdiv));
+
+	return (unsigned long)fvco;
+}
+
+#define PLL90XX_MDIV_MASK	(0xFF)
+#define PLL90XX_PDIV_MASK	(0x3F)
+#define PLL90XX_SDIV_MASK	(0x7)
+#define PLL90XX_KDIV_MASK	(0xffff)
+#define PLL90XX_MDIV_SHIFT	(16)
+#define PLL90XX_PDIV_SHIFT	(8)
+#define PLL90XX_SDIV_SHIFT	(0)
+#define PLL90XX_KDIV_SHIFT	(0)
+
+static inline unsigned long s5p_get_pll90xx(unsigned long baseclk,
+					    u32 pll_con, u32 pll_conk)
+{
+	unsigned long result;
+	u32 mdiv, pdiv, sdiv, kdiv;
+	u64 tmp;
+
+	mdiv = (pll_con >> PLL90XX_MDIV_SHIFT) & PLL90XX_MDIV_MASK;
+	pdiv = (pll_con >> PLL90XX_PDIV_SHIFT) & PLL90XX_PDIV_MASK;
+	sdiv = (pll_con >> PLL90XX_SDIV_SHIFT) & PLL90XX_SDIV_MASK;
+	kdiv = pll_conk & PLL90XX_KDIV_MASK;
+
+	/* We need to multiple baseclk by mdiv (the integer part) and kdiv
+	 * which is in 2^16ths, so shift mdiv up (does not overflow) and
+	 * add kdiv before multiplying. The use of tmp is to avoid any
+	 * overflows before shifting bac down into result when multipling
+	 * by the mdiv and kdiv pair.
+	 */
+
+	tmp = baseclk;
+	tmp *= (mdiv << 16) + kdiv;
+	do_div(tmp, (pdiv << sdiv));
+	result = tmp >> 16;
+
+	return result;
+}
diff --git a/arch/arm/plat-s5p/include/plat/s5p-clock.h b/arch/arm/plat-s5p/include/plat/s5p-clock.h
new file mode 100644
index 000000000000..56fb8b414d41
--- /dev/null
+++ b/arch/arm/plat-s5p/include/plat/s5p-clock.h
@@ -0,0 +1,40 @@
+/* linux/arch/arm/plat-s5p/include/plat/s5p-clock.h
+ *
+ * Copyright 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Header file for s5p clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_S5P_CLOCK_H
+#define __ASM_PLAT_S5P_CLOCK_H __FILE__
+
+#include <linux/clk.h>
+
+#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
+
+#define clk_fin_apll clk_ext_xtal_mux
+#define clk_fin_mpll clk_ext_xtal_mux
+#define clk_fin_epll clk_ext_xtal_mux
+#define clk_fin_vpll clk_ext_xtal_mux
+
+extern struct clk clk_ext_xtal_mux;
+extern struct clk clk_48m;
+extern struct clk clk_fout_apll;
+extern struct clk clk_fout_mpll;
+extern struct clk clk_fout_epll;
+extern struct clk clk_arm;
+extern struct clk clk_vpll;
+
+extern struct clksrc_sources clk_src_apll;
+extern struct clksrc_sources clk_src_mpll;
+extern struct clksrc_sources clk_src_epll;
+
+extern int s5p6440_clk48m_ctrl(struct clk *clk, int enable);
+extern int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable);
+
+#endif /* __ASM_PLAT_S5P_CLOCK_H */
diff --git a/arch/arm/plat-s5p/include/plat/s5p6440.h b/arch/arm/plat-s5p/include/plat/s5p6440.h
new file mode 100644
index 000000000000..a4cd75afeb3b
--- /dev/null
+++ b/arch/arm/plat-s5p/include/plat/s5p6440.h
@@ -0,0 +1,37 @@
+/* arch/arm/plat-s5p/include/plat/s5p6440.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Header file for s5p6440 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+ /* Common init code for S5P6440 related SoCs */
+
+extern void s5p6440_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s5p6440_register_clocks(void);
+extern void s5p6440_setup_clocks(void);
+
+#ifdef CONFIG_CPU_S5P6440
+
+extern  int s5p6440_init(void);
+extern void s5p6440_init_irq(void);
+extern void s5p6440_map_io(void);
+extern void s5p6440_init_clocks(int xtal);
+
+#define s5p6440_init_uarts s5p6440_common_init_uarts
+
+#else
+#define s5p6440_init_clocks NULL
+#define s5p6440_init_uarts NULL
+#define s5p6440_map_io NULL
+#define s5p6440_init NULL
+#endif
+
+/* S5P6440 timer */
+
+extern struct sys_timer s5p6440_timer;
diff --git a/arch/arm/plat-s5p/include/plat/s5p6442.h b/arch/arm/plat-s5p/include/plat/s5p6442.h
new file mode 100644
index 000000000000..7b8801349c94
--- /dev/null
+++ b/arch/arm/plat-s5p/include/plat/s5p6442.h
@@ -0,0 +1,33 @@
+/* arch/arm/plat-s5p/include/plat/s5p6442.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Header file for s5p6442 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Common init code for S5P6442 related SoCs */
+
+extern void s5p6442_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s5p6442_register_clocks(void);
+extern void s5p6442_setup_clocks(void);
+
+#ifdef CONFIG_CPU_S5P6442
+
+extern  int s5p6442_init(void);
+extern void s5p6442_init_irq(void);
+extern void s5p6442_map_io(void);
+extern void s5p6442_init_clocks(int xtal);
+
+#define s5p6442_init_uarts s5p6442_common_init_uarts
+
+#else
+#define s5p6442_init_clocks NULL
+#define s5p6442_init_uarts NULL
+#define s5p6442_map_io NULL
+#define s5p6442_init NULL
+#endif
diff --git a/arch/arm/plat-s5p/include/plat/s5pv210.h b/arch/arm/plat-s5p/include/plat/s5pv210.h
new file mode 100644
index 000000000000..6c93a0c78100
--- /dev/null
+++ b/arch/arm/plat-s5p/include/plat/s5pv210.h
@@ -0,0 +1,33 @@
+/* linux/arch/arm/plat-s5p/include/plat/s5pv210.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Header file for s5pv210 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Common init code for S5PV210 related SoCs */
+
+extern void s5pv210_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s5pv210_register_clocks(void);
+extern void s5pv210_setup_clocks(void);
+
+#ifdef CONFIG_CPU_S5PV210
+
+extern  int s5pv210_init(void);
+extern void s5pv210_init_irq(void);
+extern void s5pv210_map_io(void);
+extern void s5pv210_init_clocks(int xtal);
+
+#define s5pv210_init_uarts s5pv210_common_init_uarts
+
+#else
+#define s5pv210_init_clocks NULL
+#define s5pv210_init_uarts NULL
+#define s5pv210_map_io NULL
+#define s5pv210_init NULL
+#endif
diff --git a/arch/arm/plat-s5p/irq.c b/arch/arm/plat-s5p/irq.c
new file mode 100644
index 000000000000..25e1eb6de59e
--- /dev/null
+++ b/arch/arm/plat-s5p/irq.c
@@ -0,0 +1,72 @@
+/* arch/arm/plat-s5p/irq.c
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P - Interrupt handling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/hardware/vic.h>
+
+#include <linux/serial_core.h>
+#include <mach/map.h>
+#include <plat/regs-timer.h>
+#include <plat/regs-serial.h>
+#include <plat/cpu.h>
+#include <plat/irq-vic-timer.h>
+#include <plat/irq-uart.h>
+
+/*
+ * Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3]
+ * are consecutive when looking up the interrupt in the demux routines.
+ */
+static struct s3c_uart_irq uart_irqs[] = {
+	[0] = {
+		.regs		= S5P_VA_UART0,
+		.base_irq	= IRQ_S5P_UART_BASE0,
+		.parent_irq	= IRQ_UART0,
+	},
+	[1] = {
+		.regs		= S5P_VA_UART1,
+		.base_irq	= IRQ_S5P_UART_BASE1,
+		.parent_irq	= IRQ_UART1,
+	},
+	[2] = {
+		.regs		= S5P_VA_UART2,
+		.base_irq	= IRQ_S5P_UART_BASE2,
+		.parent_irq	= IRQ_UART2,
+	},
+#if CONFIG_SERIAL_SAMSUNG_UARTS > 3
+	[3] = {
+		.regs		= S5P_VA_UART3,
+		.base_irq	= IRQ_S5P_UART_BASE3,
+		.parent_irq	= IRQ_UART3,
+	},
+#endif
+};
+
+void __init s5p_init_irq(u32 *vic, u32 num_vic)
+{
+	int irq;
+
+	/* initialize the VICs */
+	for (irq = 0; irq < num_vic; irq++)
+		vic_init(VA_VIC(irq), VIC_BASE(irq), vic[irq], 0);
+
+	s3c_init_vic_timer_irq(IRQ_TIMER0_VIC, IRQ_TIMER0);
+	s3c_init_vic_timer_irq(IRQ_TIMER1_VIC, IRQ_TIMER1);
+	s3c_init_vic_timer_irq(IRQ_TIMER2_VIC, IRQ_TIMER2);
+	s3c_init_vic_timer_irq(IRQ_TIMER3_VIC, IRQ_TIMER3);
+	s3c_init_vic_timer_irq(IRQ_TIMER4_VIC, IRQ_TIMER4);
+
+	s3c_init_uart_irqs(uart_irqs, ARRAY_SIZE(uart_irqs));
+}
diff --git a/arch/arm/plat-s5p/setup-i2c0.c b/arch/arm/plat-s5p/setup-i2c0.c
new file mode 100644
index 000000000000..67a66e02a97a
--- /dev/null
+++ b/arch/arm/plat-s5p/setup-i2c0.c
@@ -0,0 +1,25 @@
+/* linux/arch/arm/plat-s5p/setup-i2c0.c
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * I2C0 GPIO configuration.
+ *
+ * Based on plat-s3c64xx/setup-i2c0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <plat/iic.h>
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev)
+{
+	/* Will be populated later */
+}
diff --git a/arch/arm/plat-s5pc1xx/Kconfig b/arch/arm/plat-s5pc1xx/Kconfig
index b7b9e91c0243..c7ccdf22eefa 100644
--- a/arch/arm/plat-s5pc1xx/Kconfig
+++ b/arch/arm/plat-s5pc1xx/Kconfig
@@ -11,6 +11,9 @@ config PLAT_S5PC1XX
 	select ARM_VIC
 	select NO_IOPORT
 	select ARCH_REQUIRE_GPIOLIB
+	select SAMSUNG_CLKSRC
+	select SAMSUNG_IRQ_UART
+	select SAMSUNG_IRQ_VIC_TIMER
 	select S3C_GPIO_TRACK
 	select S3C_GPIO_PULL_UPDOWN
 	select S3C_GPIO_CFG_S3C24XX
diff --git a/arch/arm/plat-s5pc1xx/clock.c b/arch/arm/plat-s5pc1xx/clock.c
index 26c21d849790..387f23190c3c 100644
--- a/arch/arm/plat-s5pc1xx/clock.c
+++ b/arch/arm/plat-s5pc1xx/clock.c
@@ -64,25 +64,13 @@ struct clk clk_54m = {
 	.rate		= 54000000,
 };
 
-static int clk_default_setrate(struct clk *clk, unsigned long rate)
-{
-	clk->rate = rate;
-	return 0;
-}
-
-static int clk_dummy_enable(struct clk *clk, int enable)
-{
-	return 0;
-}
-
 struct clk clk_hd0 = {
 	.name		= "hclkd0",
 	.id		= -1,
 	.rate		= 0,
 	.parent		= NULL,
 	.ctrlbit	= 0,
-	.set_rate	= clk_default_setrate,
-	.enable		= clk_dummy_enable,
+	.ops		= &clk_ops_def_setrate,
 };
 
 struct clk clk_pd0 = {
@@ -91,8 +79,7 @@ struct clk clk_pd0 = {
 	.rate		= 0,
 	.parent		= NULL,
 	.ctrlbit	= 0,
-	.set_rate	= clk_default_setrate,
-	.enable		= clk_dummy_enable,
+	.ops		= &clk_ops_def_setrate,
 };
 
 static int s5pc1xx_clk_gate(void __iomem *reg, struct clk *clk, int enable)
@@ -686,6 +673,8 @@ static struct clk s5pc100_init_clocks[] = {
 static struct clk *clks[] __initdata = {
 	&clk_ext,
 	&clk_epll,
+	&clk_pd0,
+	&clk_hd0,
 	&clk_27m,
 	&clk_48m,
 	&clk_54m,
@@ -700,16 +689,8 @@ void __init s5pc1xx_register_clocks(void)
 
 	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
 
-	clkp = s5pc100_init_clocks;
-	size = ARRAY_SIZE(s5pc100_init_clocks);
-
-	for (ptr = 0; ptr < size; ptr++, clkp++) {
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-	}
+	s3c_register_clocks(s5pc100_init_clocks,
+			    ARRAY_SIZE(s5pc100_init_clocks));
 
 	clkp = s5pc100_init_clocks_disable;
 	size = ARRAY_SIZE(s5pc100_init_clocks_disable);
diff --git a/arch/arm/plat-s5pc1xx/dev-uart.c b/arch/arm/plat-s5pc1xx/dev-uart.c
index f749bc5407b5..586c95c60bfe 100644
--- a/arch/arm/plat-s5pc1xx/dev-uart.c
+++ b/arch/arm/plat-s5pc1xx/dev-uart.c
@@ -143,32 +143,3 @@ struct s3c24xx_uart_resources s5pc1xx_uart_resources[] __initdata = {
 		.nr_resources	= ARRAY_SIZE(s5pc1xx_uart3_resource),
 	},
 };
-
-/* uart devices */
-
-static struct platform_device s3c24xx_uart_device0 = {
-	.id		= 0,
-};
-
-static struct platform_device s3c24xx_uart_device1 = {
-	.id		= 1,
-};
-
-static struct platform_device s3c24xx_uart_device2 = {
-	.id		= 2,
-};
-
-static struct platform_device s3c24xx_uart_device3 = {
-	.id		= 3,
-};
-
-struct platform_device *s3c24xx_uart_src[4] = {
-	&s3c24xx_uart_device0,
-	&s3c24xx_uart_device1,
-	&s3c24xx_uart_device2,
-	&s3c24xx_uart_device3,
-};
-
-struct platform_device *s3c24xx_uart_devs[4] = {
-};
-
diff --git a/arch/arm/plat-s5pc1xx/gpio-config.c b/arch/arm/plat-s5pc1xx/gpio-config.c
index bba675df9c75..a4f67e80a150 100644
--- a/arch/arm/plat-s5pc1xx/gpio-config.c
+++ b/arch/arm/plat-s5pc1xx/gpio-config.c
@@ -16,7 +16,7 @@
 #include <linux/gpio.h>
 #include <linux/io.h>
 
-#include <mach/gpio-core.h>
+#include <plat/gpio-core.h>
 #include <plat/gpio-cfg-s5pc1xx.h>
 
 s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin, unsigned int off)
diff --git a/arch/arm/plat-s5pc1xx/gpiolib.c b/arch/arm/plat-s5pc1xx/gpiolib.c
index facb410e7a71..1ffc57ac293d 100644
--- a/arch/arm/plat-s5pc1xx/gpiolib.c
+++ b/arch/arm/plat-s5pc1xx/gpiolib.c
@@ -17,8 +17,8 @@
 #include <linux/gpio.h>
 
 #include <mach/map.h>
-#include <mach/gpio-core.h>
 
+#include <plat/gpio-core.h>
 #include <plat/gpio-cfg.h>
 #include <plat/gpio-cfg-helpers.h>
 #include <plat/regs-gpio.h>
diff --git a/arch/arm/plat-s5pc1xx/include/plat/irqs.h b/arch/arm/plat-s5pc1xx/include/plat/irqs.h
index ef8736366f0d..409c804315e8 100644
--- a/arch/arm/plat-s5pc1xx/include/plat/irqs.h
+++ b/arch/arm/plat-s5pc1xx/include/plat/irqs.h
@@ -88,11 +88,11 @@
 #define IRQ_MDMA		S5PC1XX_IRQ_VIC0(18)
 #define IRQ_PDMA0		S5PC1XX_IRQ_VIC0(19)
 #define IRQ_PDMA1		S5PC1XX_IRQ_VIC0(20)
-#define IRQ_TIMER0		S5PC1XX_IRQ_VIC0(21)
-#define IRQ_TIMER1		S5PC1XX_IRQ_VIC0(22)
-#define IRQ_TIMER2		S5PC1XX_IRQ_VIC0(23)
-#define IRQ_TIMER3		S5PC1XX_IRQ_VIC0(24)
-#define IRQ_TIMER4		S5PC1XX_IRQ_VIC0(25)
+#define IRQ_TIMER0_VIC		S5PC1XX_IRQ_VIC0(21)
+#define IRQ_TIMER1_VIC		S5PC1XX_IRQ_VIC0(22)
+#define IRQ_TIMER2_VIC		S5PC1XX_IRQ_VIC0(23)
+#define IRQ_TIMER3_VIC		S5PC1XX_IRQ_VIC0(24)
+#define IRQ_TIMER4_VIC		S5PC1XX_IRQ_VIC0(25)
 #define IRQ_SYSTIMER		S5PC1XX_IRQ_VIC0(26)
 #define IRQ_WDT			S5PC1XX_IRQ_VIC0(27)
 #define IRQ_RTC_ALARM		S5PC1XX_IRQ_VIC0(28)
@@ -171,8 +171,15 @@
 #define IRQ_SDMIRQ		S5PC1XX_IRQ_VIC2(30)
 #define IRQ_SDMFIQ		S5PC1XX_IRQ_VIC2(31)
 
+#define IRQ_TIMER(x)		(IRQ_SDMFIQ + 1 + (x))
+#define IRQ_TIMER0		IRQ_TIMER(0)
+#define IRQ_TIMER1		IRQ_TIMER(1)
+#define IRQ_TIMER2		IRQ_TIMER(2)
+#define IRQ_TIMER3		IRQ_TIMER(3)
+#define IRQ_TIMER4		IRQ_TIMER(4)
+
 /* External interrupt */
-#define S3C_IRQ_EINT_BASE	(IRQ_SDMFIQ + 1)
+#define S3C_IRQ_EINT_BASE	(IRQ_SDMFIQ + 6)
 
 #define S3C_EINT(x)		(S3C_IRQ_EINT_BASE + (x - 16))
 #define IRQ_EINT(x)		(x < 16 ? IRQ_EINT0 + x : S3C_EINT(x))
diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
index c5cc86e92d65..24dec4e52538 100644
--- a/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
+++ b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
@@ -61,73 +61,10 @@
 #define S5PC100_EPLL_MASK		0xffffffff
 #define S5PC100_EPLLVAL(_m, _p, _s)	((_m) << 16 | ((_p) << 8) | ((_s)))
 
-/* CLKSRC0 */
-#define S5PC100_CLKSRC0_APLL_MASK		(0x1<<0)
-#define S5PC100_CLKSRC0_APLL_SHIFT		(0)
-#define S5PC100_CLKSRC0_MPLL_MASK		(0x1<<4)
-#define S5PC100_CLKSRC0_MPLL_SHIFT		(4)
-#define S5PC100_CLKSRC0_EPLL_MASK		(0x1<<8)
-#define S5PC100_CLKSRC0_EPLL_SHIFT		(8)
-#define S5PC100_CLKSRC0_HPLL_MASK		(0x1<<12)
-#define S5PC100_CLKSRC0_HPLL_SHIFT		(12)
-#define S5PC100_CLKSRC0_AMMUX_MASK		(0x1<<16)
-#define S5PC100_CLKSRC0_AMMUX_SHIFT		(16)
-#define S5PC100_CLKSRC0_HREF_MASK		(0x1<<20)
-#define S5PC100_CLKSRC0_HREF_SHIFT		(20)
-#define S5PC100_CLKSRC0_ONENAND_MASK	(0x1<<24)
-#define S5PC100_CLKSRC0_ONENAND_SHIFT	(24)
-
-
-/* CLKSRC1 */
-#define S5PC100_CLKSRC1_UART_MASK		(0x1<<0)
-#define S5PC100_CLKSRC1_UART_SHIFT		(0)
-#define S5PC100_CLKSRC1_SPI0_MASK		(0x3<<4)
-#define S5PC100_CLKSRC1_SPI0_SHIFT		(4)
-#define S5PC100_CLKSRC1_SPI1_MASK		(0x3<<8)
-#define S5PC100_CLKSRC1_SPI1_SHIFT		(8)
-#define S5PC100_CLKSRC1_SPI2_MASK		(0x3<<12)
-#define S5PC100_CLKSRC1_SPI2_SHIFT		(12)
-#define S5PC100_CLKSRC1_IRDA_MASK		(0x3<<16)
-#define S5PC100_CLKSRC1_IRDA_SHIFT		(16)
-#define S5PC100_CLKSRC1_UHOST_MASK		(0x3<<20)
-#define S5PC100_CLKSRC1_UHOST_SHIFT		(20)
-#define S5PC100_CLKSRC1_CLK48M_MASK		(0x1<<24)
+/* CLKSRC0..CLKSRC3 -> mostly removed due to clksrc updates */
+#define S5PC100_CLKSRC1_CLK48M_MASK	(0x1<<24)
 #define S5PC100_CLKSRC1_CLK48M_SHIFT	(24)
 
-/* CLKSRC2 */
-#define S5PC100_CLKSRC2_MMC0_MASK		(0x3<<0)
-#define S5PC100_CLKSRC2_MMC0_SHIFT		(0)
-#define S5PC100_CLKSRC2_MMC1_MASK		(0x3<<4)
-#define S5PC100_CLKSRC2_MMC1_SHIFT		(4)
-#define S5PC100_CLKSRC2_MMC2_MASK		(0x3<<8)
-#define S5PC100_CLKSRC2_MMC2_SHIFT		(8)
-#define S5PC100_CLKSRC2_LCD_MASK		(0x3<<12)
-#define S5PC100_CLKSRC2_LCD_SHIFT		(12)
-#define S5PC100_CLKSRC2_FIMC0_MASK		(0x3<<16)
-#define S5PC100_CLKSRC2_FIMC0_SHIFT		(16)
-#define S5PC100_CLKSRC2_FIMC1_MASK		(0x3<<20)
-#define S5PC100_CLKSRC2_FIMC1_SHIFT		(20)
-#define S5PC100_CLKSRC2_FIMC2_MASK		(0x3<<24)
-#define S5PC100_CLKSRC2_FIMC2_SHIFT		(24)
-#define S5PC100_CLKSRC2_MIXER_MASK		(0x3<<28)
-#define S5PC100_CLKSRC2_MIXER_SHIFT		(28)
-
-/* CLKSRC3 */
-#define S5PC100_CLKSRC3_PWI_MASK		(0x3<<0)
-#define S5PC100_CLKSRC3_PWI_SHIFT		(0)
-#define S5PC100_CLKSRC3_HCLKD2_MASK		(0x1<<4)
-#define S5PC100_CLKSRC3_HCLKD2_SHIFT	(4)
-#define S5PC100_CLKSRC3_I2SD2_MASK		(0x3<<8)
-#define S5PC100_CLKSRC3_I2SD2_SHIFT		(8)
-#define S5PC100_CLKSRC3_AUDIO0_MASK		(0x7<<12)
-#define S5PC100_CLKSRC3_AUDIO0_SHIFT	(12)
-#define S5PC100_CLKSRC3_AUDIO1_MASK		(0x7<<16)
-#define S5PC100_CLKSRC3_AUDIO1_SHIFT	(16)
-#define S5PC100_CLKSRC3_AUDIO2_MASK		(0x7<<20)
-#define S5PC100_CLKSRC3_AUDIO2_SHIFT	(20)
-#define S5PC100_CLKSRC3_SPDIF_MASK		(0x3<<24)
-#define S5PC100_CLKSRC3_SPDIF_SHIFT		(24)
-
 /* CLKDIV0 */
 #define S5PC100_CLKDIV0_APLL_MASK		(0x1<<0)
 #define S5PC100_CLKDIV0_APLL_SHIFT		(0)
@@ -140,7 +77,7 @@
 #define S5PC100_CLKDIV0_SECSS_MASK		(0x7<<16)
 #define S5PC100_CLKDIV0_SECSS_SHIFT		(16)
 
-/* CLKDIV1 */
+/* CLKDIV1 (OneNAND clock only used in one place, removed) */
 #define S5PC100_CLKDIV1_APLL2_MASK		(0x7<<0)
 #define S5PC100_CLKDIV1_APLL2_SHIFT		(0)
 #define S5PC100_CLKDIV1_MPLL_MASK		(0x3<<4)
@@ -151,56 +88,12 @@
 #define S5PC100_CLKDIV1_D1_SHIFT		(12)
 #define S5PC100_CLKDIV1_PCLKD1_MASK		(0x7<<16)
 #define S5PC100_CLKDIV1_PCLKD1_SHIFT	(16)
-#define S5PC100_CLKDIV1_ONENAND_MASK	(0x3<<20)
-#define S5PC100_CLKDIV1_ONENAND_SHIFT	(20)
 #define S5PC100_CLKDIV1_CAM_MASK		(0x1F<<24)
 #define S5PC100_CLKDIV1_CAM_SHIFT		(24)
 
-/* CLKDIV2 */
-#define S5PC100_CLKDIV2_UART_MASK		(0x7<<0)
-#define S5PC100_CLKDIV2_UART_SHIFT		(0)
-#define S5PC100_CLKDIV2_SPI0_MASK		(0xf<<4)
-#define S5PC100_CLKDIV2_SPI0_SHIFT		(4)
-#define S5PC100_CLKDIV2_SPI1_MASK		(0xf<<8)
-#define S5PC100_CLKDIV2_SPI1_SHIFT		(8)
-#define S5PC100_CLKDIV2_SPI2_MASK		(0xf<<12)
-#define S5PC100_CLKDIV2_SPI2_SHIFT		(12)
-#define S5PC100_CLKDIV2_IRDA_MASK		(0xf<<16)
-#define S5PC100_CLKDIV2_IRDA_SHIFT		(16)
-#define S5PC100_CLKDIV2_UHOST_MASK		(0xf<<20)
-#define S5PC100_CLKDIV2_UHOST_SHIFT		(20)
-
-/* CLKDIV3 */
-#define S5PC100_CLKDIV3_MMC0_MASK		(0xf<<0)
-#define S5PC100_CLKDIV3_MMC0_SHIFT		(0)
-#define S5PC100_CLKDIV3_MMC1_MASK		(0xf<<4)
-#define S5PC100_CLKDIV3_MMC1_SHIFT		(4)
-#define S5PC100_CLKDIV3_MMC2_MASK		(0xf<<8)
-#define S5PC100_CLKDIV3_MMC2_SHIFT		(8)
-#define S5PC100_CLKDIV3_LCD_MASK		(0xf<<12)
-#define S5PC100_CLKDIV3_LCD_SHIFT		(12)
-#define S5PC100_CLKDIV3_FIMC0_MASK		(0xf<<16)
-#define S5PC100_CLKDIV3_FIMC0_SHIFT		(16)
-#define S5PC100_CLKDIV3_FIMC1_MASK		(0xf<<20)
-#define S5PC100_CLKDIV3_FIMC1_SHIFT		(20)
-#define S5PC100_CLKDIV3_FIMC2_MASK		(0xf<<24)
-#define S5PC100_CLKDIV3_FIMC2_SHIFT		(24)
-#define S5PC100_CLKDIV3_HDMI_MASK		(0xf<<28)
-#define S5PC100_CLKDIV3_HDMI_SHIFT		(28)
-
-/* CLKDIV4 */
-#define S5PC100_CLKDIV4_PWI_MASK		(0x7<<0)
-#define S5PC100_CLKDIV4_PWI_SHIFT		(0)
-#define S5PC100_CLKDIV4_HCLKD2_MASK		(0x7<<4)
-#define S5PC100_CLKDIV4_HCLKD2_SHIFT	(4)
-#define S5PC100_CLKDIV4_I2SD2_MASK		(0xf<<8)
-#define S5PC100_CLKDIV4_I2SD2_SHIFT		(8)
-#define S5PC100_CLKDIV4_AUDIO0_MASK		(0xf<<12)
-#define S5PC100_CLKDIV4_AUDIO0_SHIFT	(12)
-#define S5PC100_CLKDIV4_AUDIO1_MASK		(0xf<<16)
-#define S5PC100_CLKDIV4_AUDIO1_SHIFT	(16)
-#define S5PC100_CLKDIV4_AUDIO2_MASK		(0xf<<20)
-#define S5PC100_CLKDIV4_AUDIO2_SHIFT	(20)
+/* CLKDIV2 => removed in clksrc update */
+/* CLKDIV3 => removed in clksrc update, or not needed */
+/* CLKDIV4 => removed in clksrc update, or not needed */
 
 /* HCLKD0/PCLKD0 Clock Gate 0 Registers */
 #define S5PC100_CLKGATE_D00_INTC		(1<<0)
diff --git a/arch/arm/plat-s5pc1xx/irq.c b/arch/arm/plat-s5pc1xx/irq.c
index e44fd04ef333..bfc524827819 100644
--- a/arch/arm/plat-s5pc1xx/irq.c
+++ b/arch/arm/plat-s5pc1xx/irq.c
@@ -20,87 +20,14 @@
 #include <asm/hardware/vic.h>
 
 #include <mach/map.h>
-#include <plat/regs-timer.h>
+#include <plat/irq-vic-timer.h>
+#include <plat/irq-uart.h>
 #include <plat/cpu.h>
 
-/* Timer interrupt handling */
-
-static void s3c_irq_demux_timer(unsigned int base_irq, unsigned int sub_irq)
-{
-	generic_handle_irq(sub_irq);
-}
-
-static void s3c_irq_demux_timer0(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_timer(irq, IRQ_TIMER0);
-}
-
-static void s3c_irq_demux_timer1(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_timer(irq, IRQ_TIMER1);
-}
-
-static void s3c_irq_demux_timer2(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_timer(irq, IRQ_TIMER2);
-}
-
-static void s3c_irq_demux_timer3(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_timer(irq, IRQ_TIMER3);
-}
-
-static void s3c_irq_demux_timer4(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_timer(irq, IRQ_TIMER4);
-}
-
-/* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */
-
-static void s3c_irq_timer_mask(unsigned int irq)
-{
-	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
-
-	reg &= 0x1f;  /* mask out pending interrupts */
-	reg &= ~(1 << (irq - IRQ_TIMER0));
-	__raw_writel(reg, S3C64XX_TINT_CSTAT);
-}
-
-static void s3c_irq_timer_unmask(unsigned int irq)
-{
-	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
-
-	reg &= 0x1f;  /* mask out pending interrupts */
-	reg |= 1 << (irq - IRQ_TIMER0);
-	__raw_writel(reg, S3C64XX_TINT_CSTAT);
-}
-
-static void s3c_irq_timer_ack(unsigned int irq)
-{
-	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
-
-	reg &= 0x1f;  /* mask out pending interrupts */
-	reg |= (1 << 5) << (irq - IRQ_TIMER0);
-	__raw_writel(reg, S3C64XX_TINT_CSTAT);
-}
-
-static struct irq_chip s3c_irq_timer = {
-	.name		= "s3c-timer",
-	.mask		= s3c_irq_timer_mask,
-	.unmask		= s3c_irq_timer_unmask,
-	.ack		= s3c_irq_timer_ack,
-};
-
-struct uart_irq {
-	void __iomem	*regs;
-	unsigned int	 base_irq;
-	unsigned int	 parent_irq;
-};
-
 /* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3]
  * are consecutive when looking up the interrupt in the demux routines.
  */
-static struct uart_irq uart_irqs[] = {
+static struct s3c_uart_irq uart_irqs[] = {
 	[0] = {
 		.regs		= (void *)S3C_VA_UART0,
 		.base_irq	= IRQ_S3CUART_BASE0,
@@ -123,113 +50,9 @@ static struct uart_irq uart_irqs[] = {
 	},
 };
 
-static inline void __iomem *s3c_irq_uart_base(unsigned int irq)
-{
-	struct uart_irq *uirq = get_irq_chip_data(irq);
-	return uirq->regs;
-}
-
-static inline unsigned int s3c_irq_uart_bit(unsigned int irq)
-{
-	return irq & 3;
-}
-
-/* UART interrupt registers, not worth adding to seperate include header */
-#define S3C64XX_UINTP	0x30
-#define S3C64XX_UINTSP	0x34
-#define S3C64XX_UINTM	0x38
-
-static void s3c_irq_uart_mask(unsigned int irq)
-{
-	void __iomem *regs = s3c_irq_uart_base(irq);
-	unsigned int bit = s3c_irq_uart_bit(irq);
-	u32 reg;
-
-	reg = __raw_readl(regs + S3C64XX_UINTM);
-	reg |= (1 << bit);
-	__raw_writel(reg, regs + S3C64XX_UINTM);
-}
-
-static void s3c_irq_uart_maskack(unsigned int irq)
-{
-	void __iomem *regs = s3c_irq_uart_base(irq);
-	unsigned int bit = s3c_irq_uart_bit(irq);
-	u32 reg;
-
-	reg = __raw_readl(regs + S3C64XX_UINTM);
-	reg |= (1 << bit);
-	__raw_writel(reg, regs + S3C64XX_UINTM);
-	__raw_writel(1 << bit, regs + S3C64XX_UINTP);
-}
-
-static void s3c_irq_uart_unmask(unsigned int irq)
-{
-	void __iomem *regs = s3c_irq_uart_base(irq);
-	unsigned int bit = s3c_irq_uart_bit(irq);
-	u32 reg;
-
-	reg = __raw_readl(regs + S3C64XX_UINTM);
-	reg &= ~(1 << bit);
-	__raw_writel(reg, regs + S3C64XX_UINTM);
-}
-
-static void s3c_irq_uart_ack(unsigned int irq)
-{
-	void __iomem *regs = s3c_irq_uart_base(irq);
-	unsigned int bit = s3c_irq_uart_bit(irq);
-
-	__raw_writel(1 << bit, regs + S3C64XX_UINTP);
-}
-
-static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc)
-{
-	struct uart_irq *uirq = &uart_irqs[irq - IRQ_UART0];
-	u32 pend = __raw_readl(uirq->regs + S3C64XX_UINTP);
-	int base = uirq->base_irq;
-
-	if (pend & (1 << 0))
-		generic_handle_irq(base);
-	if (pend & (1 << 1))
-		generic_handle_irq(base + 1);
-	if (pend & (1 << 2))
-		generic_handle_irq(base + 2);
-	if (pend & (1 << 3))
-		generic_handle_irq(base + 3);
-}
-
-static struct irq_chip s3c_irq_uart = {
-	.name		= "s3c-uart",
-	.mask		= s3c_irq_uart_mask,
-	.unmask		= s3c_irq_uart_unmask,
-	.mask_ack	= s3c_irq_uart_maskack,
-	.ack		= s3c_irq_uart_ack,
-};
-
-static void __init s5pc1xx_uart_irq(struct uart_irq *uirq)
-{
-	void __iomem *reg_base = uirq->regs;
-	unsigned int irq;
-	int offs;
-
-	/* mask all interrupts at the start. */
-	__raw_writel(0xf, reg_base + S3C64XX_UINTM);
-
-	for (offs = 0; offs < 3; offs++) {
-		irq = uirq->base_irq + offs;
-
-		set_irq_chip(irq, &s3c_irq_uart);
-		set_irq_chip_data(irq, uirq);
-		set_irq_handler(irq, handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-
-	set_irq_chained_handler(uirq->parent_irq, s3c_irq_demux_uart);
-}
-
 void __init s5pc1xx_init_irq(u32 *vic_valid, int num)
 {
 	int i;
-	int uart, irq;
 
 	printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
 
@@ -240,20 +63,13 @@ void __init s5pc1xx_init_irq(u32 *vic_valid, int num)
 
 	/* add the timer sub-irqs */
 
-	set_irq_chained_handler(IRQ_TIMER0, s3c_irq_demux_timer0);
-	set_irq_chained_handler(IRQ_TIMER1, s3c_irq_demux_timer1);
-	set_irq_chained_handler(IRQ_TIMER2, s3c_irq_demux_timer2);
-	set_irq_chained_handler(IRQ_TIMER3, s3c_irq_demux_timer3);
-	set_irq_chained_handler(IRQ_TIMER4, s3c_irq_demux_timer4);
-
-	for (irq = IRQ_TIMER0; irq <= IRQ_TIMER4; irq++) {
-		set_irq_chip(irq, &s3c_irq_timer);
-		set_irq_handler(irq, handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
+	s3c_init_vic_timer_irq(IRQ_TIMER0_VIC, IRQ_TIMER0);
+	s3c_init_vic_timer_irq(IRQ_TIMER1_VIC, IRQ_TIMER1);
+	s3c_init_vic_timer_irq(IRQ_TIMER2_VIC, IRQ_TIMER2);
+	s3c_init_vic_timer_irq(IRQ_TIMER3_VIC, IRQ_TIMER3);
+	s3c_init_vic_timer_irq(IRQ_TIMER4_VIC, IRQ_TIMER4);
 
-	for (uart = 0; uart < ARRAY_SIZE(uart_irqs); uart++)
-		s5pc1xx_uart_irq(&uart_irqs[uart]);
+	s3c_init_uart_irqs(uart_irqs, ARRAY_SIZE(uart_irqs));
 }
 
 
diff --git a/arch/arm/plat-s5pc1xx/s5pc100-clock.c b/arch/arm/plat-s5pc1xx/s5pc100-clock.c
index b436d44510c8..2bf6c57a96a2 100644
--- a/arch/arm/plat-s5pc1xx/s5pc100-clock.c
+++ b/arch/arm/plat-s5pc1xx/s5pc100-clock.c
@@ -29,6 +29,7 @@
 
 #include <plat/regs-clock.h>
 #include <plat/clock.h>
+#include <plat/clock-clksrc.h>
 #include <plat/cpu.h>
 #include <plat/pll.h>
 #include <plat/devs.h>
@@ -51,23 +52,6 @@ static struct clk clk_ext_xtal_mux = {
 #define clk_fout_mpll	clk_mpll
 #define clk_vclk_54m	clk_54m
 
-struct clk_sources {
-	unsigned int	nr_sources;
-	struct clk	**sources;
-};
-
-struct clksrc_clk {
-	struct clk		clk;
-	unsigned int		mask;
-	unsigned int		shift;
-
-	struct clk_sources	*sources;
-
-	unsigned int		divider_shift;
-	void __iomem		*reg_divider;
-	void __iomem		*reg_source;
-};
-
 /* APLL */
 static struct clk clk_fout_apll = {
 	.name		= "fout_apll",
@@ -80,7 +64,7 @@ static struct clk *clk_src_apll_list[] = {
 	[1] = &clk_fout_apll,
 };
 
-static struct clk_sources clk_src_apll = {
+static struct clksrc_sources clk_src_apll = {
 	.sources	= clk_src_apll_list,
 	.nr_sources	= ARRAY_SIZE(clk_src_apll_list),
 };
@@ -90,10 +74,8 @@ static struct clksrc_clk clk_mout_apll = {
 		.name		= "mout_apll",
 		.id		= -1,
 	},
-	.shift		= S5PC100_CLKSRC0_APLL_SHIFT,
-	.mask		= S5PC100_CLKSRC0_APLL_MASK,
 	.sources	= &clk_src_apll,
-	.reg_source	= S5PC100_CLKSRC0,
+	.reg_src = { .reg = S5PC100_CLKSRC0, .shift = 0, .size = 1, },
 };
 
 static unsigned long s5pc100_clk_dout_apll_get_rate(struct clk *clk)
@@ -111,7 +93,9 @@ static struct clk clk_dout_apll = {
 	.name		= "dout_apll",
 	.id		= -1,
 	.parent		= &clk_mout_apll.clk,
-	.get_rate	= s5pc100_clk_dout_apll_get_rate,
+	.ops		= &(struct clk_ops) {
+		.get_rate	= s5pc100_clk_dout_apll_get_rate,
+	},
 };
 
 static unsigned long s5pc100_clk_arm_get_rate(struct clk *clk)
@@ -165,9 +149,11 @@ static struct clk clk_arm = {
 	.name		= "armclk",
 	.id		= -1,
 	.parent		= &clk_dout_apll,
-	.get_rate	= s5pc100_clk_arm_get_rate,
-	.set_rate	= s5pc100_clk_arm_set_rate,
-	.round_rate	= s5pc100_clk_arm_round_rate,
+	.ops		= &(struct clk_ops) {
+		.get_rate	= s5pc100_clk_arm_get_rate,
+		.set_rate	= s5pc100_clk_arm_set_rate,
+		.round_rate	= s5pc100_clk_arm_round_rate,
+	},
 };
 
 static unsigned long s5pc100_clk_dout_d0_bus_get_rate(struct clk *clk)
@@ -185,7 +171,9 @@ static struct clk clk_dout_d0_bus = {
 	.name		= "dout_d0_bus",
 	.id		= -1,
 	.parent		= &clk_arm,
-	.get_rate	= s5pc100_clk_dout_d0_bus_get_rate,
+	.ops		= &(struct clk_ops) {
+		.get_rate	= s5pc100_clk_dout_d0_bus_get_rate,
+	},
 };
 
 static unsigned long s5pc100_clk_dout_pclkd0_get_rate(struct clk *clk)
@@ -203,7 +191,9 @@ static struct clk clk_dout_pclkd0 = {
 	.name		= "dout_pclkd0",
 	.id		= -1,
 	.parent		= &clk_dout_d0_bus,
-	.get_rate	= s5pc100_clk_dout_pclkd0_get_rate,
+	.ops		= &(struct clk_ops) {
+		.get_rate	= s5pc100_clk_dout_pclkd0_get_rate,
+	},
 };
 
 static unsigned long s5pc100_clk_dout_apll2_get_rate(struct clk *clk)
@@ -221,7 +211,9 @@ static struct clk clk_dout_apll2 = {
 	.name		= "dout_apll2",
 	.id		= -1,
 	.parent		= &clk_mout_apll.clk,
-	.get_rate	= s5pc100_clk_dout_apll2_get_rate,
+	.ops		= &(struct clk_ops) {
+		.get_rate	= s5pc100_clk_dout_apll2_get_rate,
+	},
 };
 
 /* MPLL */
@@ -230,7 +222,7 @@ static struct clk *clk_src_mpll_list[] = {
 	[1] = &clk_fout_mpll,
 };
 
-static struct clk_sources clk_src_mpll = {
+static struct clksrc_sources clk_src_mpll = {
 	.sources	= clk_src_mpll_list,
 	.nr_sources	= ARRAY_SIZE(clk_src_mpll_list),
 };
@@ -240,10 +232,8 @@ static struct clksrc_clk clk_mout_mpll = {
 		.name		= "mout_mpll",
 		.id		= -1,
 	},
-	.shift		= S5PC100_CLKSRC0_MPLL_SHIFT,
-	.mask		= S5PC100_CLKSRC0_MPLL_MASK,
 	.sources	= &clk_src_mpll,
-	.reg_source	= S5PC100_CLKSRC0,
+	.reg_src = { .reg = S5PC100_CLKSRC0, .shift = 4, .size = 1, },
 };
 
 static struct clk *clkset_am_list[] = {
@@ -251,7 +241,7 @@ static struct clk *clkset_am_list[] = {
 	[1] = &clk_dout_apll2,
 };
 
-static struct clk_sources clk_src_am = {
+static struct clksrc_sources clk_src_am = {
 	.sources	= clkset_am_list,
 	.nr_sources	= ARRAY_SIZE(clkset_am_list),
 };
@@ -261,10 +251,8 @@ static struct clksrc_clk clk_mout_am = {
 		.name		= "mout_am",
 		.id		= -1,
 	},
-	.shift		= S5PC100_CLKSRC0_AMMUX_SHIFT,
-	.mask		= S5PC100_CLKSRC0_AMMUX_MASK,
 	.sources	= &clk_src_am,
-	.reg_source	= S5PC100_CLKSRC0,
+	.reg_src = { .reg = S5PC100_CLKSRC0, .shift = 16, .size = 1, },
 };
 
 static unsigned long s5pc100_clk_dout_d1_bus_get_rate(struct clk *clk)
@@ -284,7 +272,9 @@ static struct clk clk_dout_d1_bus = {
 	.name		= "dout_d1_bus",
 	.id		= -1,
 	.parent		= &clk_mout_am.clk,
-	.get_rate	= s5pc100_clk_dout_d1_bus_get_rate,
+	.ops		= &(struct clk_ops) {
+		.get_rate	= s5pc100_clk_dout_d1_bus_get_rate,
+	},
 };
 
 static struct clk *clkset_onenand_list[] = {
@@ -292,7 +282,7 @@ static struct clk *clkset_onenand_list[] = {
 	[1] = &clk_dout_d1_bus,
 };
 
-static struct clk_sources clk_src_onenand = {
+static struct clksrc_sources clk_src_onenand = {
 	.sources	= clkset_onenand_list,
 	.nr_sources	= ARRAY_SIZE(clkset_onenand_list),
 };
@@ -302,10 +292,8 @@ static struct clksrc_clk clk_mout_onenand = {
 		.name		= "mout_onenand",
 		.id		= -1,
 	},
-	.shift		= S5PC100_CLKSRC0_ONENAND_SHIFT,
-	.mask		= S5PC100_CLKSRC0_ONENAND_MASK,
 	.sources	= &clk_src_onenand,
-	.reg_source	= S5PC100_CLKSRC0,
+	.reg_src = { .reg = S5PC100_CLKSRC0, .shift = 24, .size = 1, },
 };
 
 static unsigned long s5pc100_clk_dout_pclkd1_get_rate(struct clk *clk)
@@ -325,7 +313,9 @@ static struct clk clk_dout_pclkd1 = {
 	.name		= "dout_pclkd1",
 	.id		= -1,
 	.parent		= &clk_dout_d1_bus,
-	.get_rate	= s5pc100_clk_dout_pclkd1_get_rate,
+	.ops		= &(struct clk_ops) {
+		.get_rate	= s5pc100_clk_dout_pclkd1_get_rate,
+	},
 };
 
 static unsigned long s5pc100_clk_dout_mpll2_get_rate(struct clk *clk)
@@ -345,7 +335,9 @@ static struct clk clk_dout_mpll2 = {
 	.name		= "dout_mpll2",
 	.id		= -1,
 	.parent		= &clk_mout_am.clk,
-	.get_rate	= s5pc100_clk_dout_mpll2_get_rate,
+	.ops		= &(struct clk_ops) {
+		.get_rate	= s5pc100_clk_dout_mpll2_get_rate,
+	},
 };
 
 static unsigned long s5pc100_clk_dout_cam_get_rate(struct clk *clk)
@@ -365,7 +357,9 @@ static struct clk clk_dout_cam = {
 	.name		= "dout_cam",
 	.id		= -1,
 	.parent		= &clk_dout_mpll2,
-	.get_rate	= s5pc100_clk_dout_cam_get_rate,
+	.ops		= &(struct clk_ops) {
+		.get_rate	= s5pc100_clk_dout_cam_get_rate,
+	},
 };
 
 static unsigned long s5pc100_clk_dout_mpll_get_rate(struct clk *clk)
@@ -385,7 +379,9 @@ static struct clk clk_dout_mpll = {
 	.name		= "dout_mpll",
 	.id		= -1,
 	.parent		= &clk_mout_am.clk,
-	.get_rate	= s5pc100_clk_dout_mpll_get_rate,
+	.ops		= &(struct clk_ops) {
+		.get_rate	= s5pc100_clk_dout_mpll_get_rate,
+	},
 };
 
 /* EPLL */
@@ -399,7 +395,7 @@ static struct clk *clk_src_epll_list[] = {
 	[1] = &clk_fout_epll,
 };
 
-static struct clk_sources clk_src_epll = {
+static struct clksrc_sources clk_src_epll = {
 	.sources	= clk_src_epll_list,
 	.nr_sources	= ARRAY_SIZE(clk_src_epll_list),
 };
@@ -409,10 +405,8 @@ static struct clksrc_clk clk_mout_epll = {
 		.name		= "mout_epll",
 		.id		= -1,
 	},
-	.shift		= S5PC100_CLKSRC0_EPLL_SHIFT,
-	.mask		= S5PC100_CLKSRC0_EPLL_MASK,
-	.sources	= &clk_src_epll,
-	.reg_source	= S5PC100_CLKSRC0,
+	.sources = &clk_src_epll,
+	.reg_src = { .reg = S5PC100_CLKSRC0, .shift = 8, .size = 1, },
 };
 
 /* HPLL */
@@ -426,7 +420,7 @@ static struct clk *clk_src_hpll_list[] = {
 	[1] = &clk_fout_hpll,
 };
 
-static struct clk_sources clk_src_hpll = {
+static struct clksrc_sources clk_src_hpll = {
 	.sources	= clk_src_hpll_list,
 	.nr_sources	= ARRAY_SIZE(clk_src_hpll_list),
 };
@@ -436,10 +430,8 @@ static struct clksrc_clk clk_mout_hpll = {
 		.name		= "mout_hpll",
 		.id		= -1,
 	},
-	.shift		= S5PC100_CLKSRC0_HPLL_SHIFT,
-	.mask		= S5PC100_CLKSRC0_HPLL_MASK,
-	.sources	= &clk_src_hpll,
-	.reg_source	= S5PC100_CLKSRC0,
+	.sources = &clk_src_hpll,
+	.reg_src = { .reg = S5PC100_CLKSRC0, .shift = 12, .size = 1, },
 };
 
 /* Peripherals */
@@ -454,190 +446,6 @@ static struct clksrc_clk clk_mout_hpll = {
  * have a common parent divisor so are not included here.
  */
 
-static inline struct clksrc_clk *to_clksrc(struct clk *clk)
-{
-	return container_of(clk, struct clksrc_clk, clk);
-}
-
-static unsigned long s5pc100_getrate_clksrc(struct clk *clk)
-{
-	struct clksrc_clk *sclk = to_clksrc(clk);
-	unsigned long rate = clk_get_rate(clk->parent);
-	u32 clkdiv = __raw_readl(sclk->reg_divider);
-
-	clkdiv >>= sclk->divider_shift;
-	clkdiv &= 0xf;
-	clkdiv++;
-
-	rate /= clkdiv;
-	return rate;
-}
-
-static int s5pc100_setrate_clksrc(struct clk *clk, unsigned long rate)
-{
-	struct clksrc_clk *sclk = to_clksrc(clk);
-	void __iomem *reg = sclk->reg_divider;
-	unsigned int div;
-	u32 val;
-
-	rate = clk_round_rate(clk, rate);
-	div = clk_get_rate(clk->parent) / rate;
-	if (div > 16)
-		return -EINVAL;
-
-	val = __raw_readl(reg);
-	val &= ~(0xf << sclk->divider_shift);
-	val |= (div - 1) << sclk->divider_shift;
-	__raw_writel(val, reg);
-
-	return 0;
-}
-
-static int s5pc100_setparent_clksrc(struct clk *clk, struct clk *parent)
-{
-	struct clksrc_clk *sclk = to_clksrc(clk);
-	struct clk_sources *srcs = sclk->sources;
-	u32 clksrc = __raw_readl(sclk->reg_source);
-	int src_nr = -1;
-	int ptr;
-
-	for (ptr = 0; ptr < srcs->nr_sources; ptr++)
-		if (srcs->sources[ptr] == parent) {
-			src_nr = ptr;
-			break;
-		}
-
-	if (src_nr >= 0) {
-		clksrc &= ~sclk->mask;
-		clksrc |= src_nr << sclk->shift;
-
-		__raw_writel(clksrc, sclk->reg_source);
-		return 0;
-	}
-
-	return -EINVAL;
-}
-
-static unsigned long s5pc100_roundrate_clksrc(struct clk *clk,
-					      unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	int div;
-
-	if (rate > parent_rate)
-		rate = parent_rate;
-	else {
-		div = rate / parent_rate;
-
-		if (div == 0)
-			div = 1;
-		if (div > 16)
-			div = 16;
-
-		rate = parent_rate / div;
-	}
-
-	return rate;
-}
-
-static struct clk *clkset_spi_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll2,
-	&clk_fin_epll,
-	&clk_mout_hpll.clk,
-};
-
-static struct clk_sources clkset_spi = {
-	.sources	= clkset_spi_list,
-	.nr_sources	= ARRAY_SIZE(clkset_spi_list),
-};
-
-static struct clksrc_clk clk_spi0 = {
-	.clk	= {
-		.name		= "spi_bus",
-		.id		= 0,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI0,
-		.enable		= s5pc100_sclk0_ctrl,
-		.set_parent	= s5pc100_setparent_clksrc,
-		.get_rate	= s5pc100_getrate_clksrc,
-		.set_rate	= s5pc100_setrate_clksrc,
-		.round_rate	= s5pc100_roundrate_clksrc,
-	},
-	.shift		= S5PC100_CLKSRC1_SPI0_SHIFT,
-	.mask		= S5PC100_CLKSRC1_SPI0_MASK,
-	.sources	= &clkset_spi,
-	.divider_shift	= S5PC100_CLKDIV2_SPI0_SHIFT,
-	.reg_divider	= S5PC100_CLKDIV2,
-	.reg_source	= S5PC100_CLKSRC1,
-};
-
-static struct clksrc_clk clk_spi1 = {
-	.clk	= {
-		.name		= "spi_bus",
-		.id		= 1,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI1,
-		.enable		= s5pc100_sclk0_ctrl,
-		.set_parent	= s5pc100_setparent_clksrc,
-		.get_rate	= s5pc100_getrate_clksrc,
-		.set_rate	= s5pc100_setrate_clksrc,
-		.round_rate	= s5pc100_roundrate_clksrc,
-	},
-	.shift		= S5PC100_CLKSRC1_SPI1_SHIFT,
-	.mask		= S5PC100_CLKSRC1_SPI1_MASK,
-	.sources	= &clkset_spi,
-	.divider_shift	= S5PC100_CLKDIV2_SPI1_SHIFT,
-	.reg_divider	= S5PC100_CLKDIV2,
-	.reg_source	= S5PC100_CLKSRC1,
-};
-
-static struct clksrc_clk clk_spi2 = {
-	.clk	= {
-		.name		= "spi_bus",
-		.id		= 2,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI2,
-		.enable		= s5pc100_sclk0_ctrl,
-		.set_parent	= s5pc100_setparent_clksrc,
-		.get_rate	= s5pc100_getrate_clksrc,
-		.set_rate	= s5pc100_setrate_clksrc,
-		.round_rate	= s5pc100_roundrate_clksrc,
-	},
-	.shift		= S5PC100_CLKSRC1_SPI2_SHIFT,
-	.mask		= S5PC100_CLKSRC1_SPI2_MASK,
-	.sources	= &clkset_spi,
-	.divider_shift	= S5PC100_CLKDIV2_SPI2_SHIFT,
-	.reg_divider	= S5PC100_CLKDIV2,
-	.reg_source	= S5PC100_CLKSRC1,
-};
-
-static struct clk *clkset_uart_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-};
-
-static struct clk_sources clkset_uart = {
-	.sources	= clkset_uart_list,
-	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
-};
-
-static struct clksrc_clk clk_uart_uclk1 = {
-	.clk	= {
-		.name		= "uclk1",
-		.id		= -1,
-		.ctrlbit        = S5PC100_CLKGATE_SCLK0_UART,
-		.enable		= s5pc100_sclk0_ctrl,
-		.set_parent	= s5pc100_setparent_clksrc,
-		.get_rate	= s5pc100_getrate_clksrc,
-		.set_rate	= s5pc100_setrate_clksrc,
-		.round_rate	= s5pc100_roundrate_clksrc,
-	},
-	.shift		= S5PC100_CLKSRC1_UART_SHIFT,
-	.mask		= S5PC100_CLKSRC1_UART_MASK,
-	.sources	= &clkset_uart,
-	.divider_shift	= S5PC100_CLKDIV2_UART_SHIFT,
-	.reg_divider	= S5PC100_CLKDIV2,
-	.reg_source	= S5PC100_CLKSRC1,
-};
-
 static struct clk clk_iis_cd0 = {
 	.name		= "iis_cdclk0",
 	.id		= -1,
@@ -672,28 +480,31 @@ static struct clk *clkset_audio0_list[] = {
 	&clk_mout_hpll.clk,
 };
 
-static struct clk_sources clkset_audio0 = {
+static struct clksrc_sources clkset_audio0 = {
 	.sources	= clkset_audio0_list,
 	.nr_sources	= ARRAY_SIZE(clkset_audio0_list),
 };
 
-static struct clksrc_clk clk_audio0 = {
-	.clk	= {
-		.name		= "audio-bus",
-		.id		= 0,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK1_AUDIO0,
-		.enable		= s5pc100_sclk1_ctrl,
-		.set_parent	= s5pc100_setparent_clksrc,
-		.get_rate	= s5pc100_getrate_clksrc,
-		.set_rate	= s5pc100_setrate_clksrc,
-		.round_rate	= s5pc100_roundrate_clksrc,
-	},
-	.shift		= S5PC100_CLKSRC3_AUDIO0_SHIFT,
-	.mask		= S5PC100_CLKSRC3_AUDIO0_MASK,
-	.sources	= &clkset_audio0,
-	.divider_shift	= S5PC100_CLKDIV4_AUDIO0_SHIFT,
-	.reg_divider	= S5PC100_CLKDIV4,
-	.reg_source	= S5PC100_CLKSRC3,
+static struct clk *clkset_spi_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll2,
+	&clk_fin_epll,
+	&clk_mout_hpll.clk,
+};
+
+static struct clksrc_sources clkset_spi = {
+	.sources	= clkset_spi_list,
+	.nr_sources	= ARRAY_SIZE(clkset_spi_list),
+};
+
+static struct clk *clkset_uart_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+};
+
+static struct clksrc_sources clkset_uart = {
+	.sources	= clkset_uart_list,
+	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
 };
 
 static struct clk *clkset_audio1_list[] = {
@@ -705,30 +516,11 @@ static struct clk *clkset_audio1_list[] = {
 	&clk_mout_hpll.clk,
 };
 
-static struct clk_sources clkset_audio1 = {
+static struct clksrc_sources clkset_audio1 = {
 	.sources	= clkset_audio1_list,
 	.nr_sources	= ARRAY_SIZE(clkset_audio1_list),
 };
 
-static struct clksrc_clk clk_audio1 = {
-	.clk	= {
-		.name		= "audio-bus",
-		.id		= 1,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK1_AUDIO1,
-		.enable		= s5pc100_sclk1_ctrl,
-		.set_parent	= s5pc100_setparent_clksrc,
-		.get_rate	= s5pc100_getrate_clksrc,
-		.set_rate	= s5pc100_setrate_clksrc,
-		.round_rate	= s5pc100_roundrate_clksrc,
-	},
-	.shift		= S5PC100_CLKSRC3_AUDIO1_SHIFT,
-	.mask		= S5PC100_CLKSRC3_AUDIO1_MASK,
-	.sources	= &clkset_audio1,
-	.divider_shift	= S5PC100_CLKDIV4_AUDIO1_SHIFT,
-	.reg_divider	= S5PC100_CLKDIV4,
-	.reg_source	= S5PC100_CLKSRC3,
-};
-
 static struct clk *clkset_audio2_list[] = {
 	&clk_mout_epll.clk,
 	&clk_dout_mpll,
@@ -737,52 +529,56 @@ static struct clk *clkset_audio2_list[] = {
 	&clk_mout_hpll.clk,
 };
 
-static struct clk_sources clkset_audio2 = {
+static struct clksrc_sources clkset_audio2 = {
 	.sources	= clkset_audio2_list,
 	.nr_sources	= ARRAY_SIZE(clkset_audio2_list),
 };
 
-static struct clksrc_clk clk_audio2 = {
-	.clk	= {
-		.name		= "audio-bus",
-		.id		= 2,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK1_AUDIO2,
-		.enable		= s5pc100_sclk1_ctrl,
-		.set_parent	= s5pc100_setparent_clksrc,
-		.get_rate	= s5pc100_getrate_clksrc,
-		.set_rate	= s5pc100_setrate_clksrc,
-		.round_rate	= s5pc100_roundrate_clksrc,
+static struct clksrc_clk clksrc_audio[] = {
+	{
+		.clk	= {
+			.name		= "audio-bus",
+			.id		= 0,
+			.ctrlbit	= S5PC100_CLKGATE_SCLK1_AUDIO0,
+			.enable		= s5pc100_sclk1_ctrl,
+		},
+		.sources = &clkset_audio0,
+		.reg_div = { .reg = S5PC100_CLKDIV4, .shift = 12, .size = 4, },
+		.reg_src = { .reg = S5PC100_CLKSRC3, .shift = 12, .size = 3, },
+	}, {
+		.clk	= {
+			.name		= "audio-bus",
+			.id		= 1,
+			.ctrlbit	= S5PC100_CLKGATE_SCLK1_AUDIO1,
+			.enable		= s5pc100_sclk1_ctrl,
+		},
+		.sources = &clkset_audio1,
+		.reg_div = { .reg = S5PC100_CLKDIV4, .shift = 16, .size = 4, },
+		.reg_src = { .reg = S5PC100_CLKSRC3, .shift = 16, .size = 3, },
+	}, {
+		.clk	= {
+			.name		= "audio-bus",
+			.id		= 2,
+			.ctrlbit	= S5PC100_CLKGATE_SCLK1_AUDIO2,
+			.enable		= s5pc100_sclk1_ctrl,
+		},
+		.sources = &clkset_audio2,
+		.reg_div = { .reg = S5PC100_CLKDIV4, .shift = 20, .size = 4, },
+		.reg_src = { .reg = S5PC100_CLKSRC3, .shift = 20, .size = 3, },
 	},
-	.shift		= S5PC100_CLKSRC3_AUDIO2_SHIFT,
-	.mask		= S5PC100_CLKSRC3_AUDIO2_MASK,
-	.sources	= &clkset_audio2,
-	.divider_shift	= S5PC100_CLKDIV4_AUDIO2_SHIFT,
-	.reg_divider	= S5PC100_CLKDIV4,
-	.reg_source	= S5PC100_CLKSRC3,
 };
 
 static struct clk *clkset_spdif_list[] = {
-	&clk_audio0.clk,
-	&clk_audio1.clk,
-	&clk_audio2.clk,
+	&clksrc_audio[0].clk,
+	&clksrc_audio[1].clk,
+	&clksrc_audio[2].clk,
 };
 
-static struct clk_sources clkset_spdif = {
+static struct clksrc_sources clkset_spdif = {
 	.sources	= clkset_spdif_list,
 	.nr_sources	= ARRAY_SIZE(clkset_spdif_list),
 };
 
-static struct clksrc_clk clk_spdif = {
-	.clk	= {
-		.name		= "spdif",
-		.id		= -1,
-	},
-	.shift		= S5PC100_CLKSRC3_SPDIF_SHIFT,
-	.mask		= S5PC100_CLKSRC3_SPDIF_MASK,
-	.sources	= &clkset_spdif,
-	.reg_source	= S5PC100_CLKSRC3,
-};
-
 static struct clk *clkset_lcd_fimc_list[] = {
 	&clk_mout_epll.clk,
 	&clk_dout_mpll,
@@ -790,87 +586,11 @@ static struct clk *clkset_lcd_fimc_list[] = {
 	&clk_vclk_54m,
 };
 
-static struct clk_sources clkset_lcd_fimc = {
+static struct clksrc_sources clkset_lcd_fimc = {
 	.sources	= clkset_lcd_fimc_list,
 	.nr_sources	= ARRAY_SIZE(clkset_lcd_fimc_list),
 };
 
-static struct clksrc_clk clk_lcd = {
-	.clk	= {
-		.name		= "lcd",
-		.id		= -1,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK1_LCD,
-		.enable		= s5pc100_sclk1_ctrl,
-		.set_parent	= s5pc100_setparent_clksrc,
-		.get_rate	= s5pc100_getrate_clksrc,
-		.set_rate	= s5pc100_setrate_clksrc,
-		.round_rate	= s5pc100_roundrate_clksrc,
-	},
-	.shift		= S5PC100_CLKSRC2_LCD_SHIFT,
-	.mask		= S5PC100_CLKSRC2_LCD_MASK,
-	.sources	= &clkset_lcd_fimc,
-	.divider_shift	= S5PC100_CLKDIV3_LCD_SHIFT,
-	.reg_divider	= S5PC100_CLKDIV3,
-	.reg_source	= S5PC100_CLKSRC2,
-};
-
-static struct clksrc_clk clk_fimc0 = {
-	.clk	= {
-		.name		= "fimc",
-		.id		= 0,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK1_FIMC0,
-		.enable		= s5pc100_sclk1_ctrl,
-		.set_parent	= s5pc100_setparent_clksrc,
-		.get_rate	= s5pc100_getrate_clksrc,
-		.set_rate	= s5pc100_setrate_clksrc,
-		.round_rate	= s5pc100_roundrate_clksrc,
-	},
-	.shift		= S5PC100_CLKSRC2_FIMC0_SHIFT,
-	.mask		= S5PC100_CLKSRC2_FIMC0_MASK,
-	.sources	= &clkset_lcd_fimc,
-	.divider_shift	= S5PC100_CLKDIV3_FIMC0_SHIFT,
-	.reg_divider	= S5PC100_CLKDIV3,
-	.reg_source	= S5PC100_CLKSRC2,
-};
-
-static struct clksrc_clk clk_fimc1 = {
-	.clk	= {
-		.name		= "fimc",
-		.id		= 1,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK1_FIMC1,
-		.enable		= s5pc100_sclk1_ctrl,
-		.set_parent	= s5pc100_setparent_clksrc,
-		.get_rate	= s5pc100_getrate_clksrc,
-		.set_rate	= s5pc100_setrate_clksrc,
-		.round_rate	= s5pc100_roundrate_clksrc,
-	},
-	.shift		= S5PC100_CLKSRC2_FIMC1_SHIFT,
-	.mask		= S5PC100_CLKSRC2_FIMC1_MASK,
-	.sources	= &clkset_lcd_fimc,
-	.divider_shift	= S5PC100_CLKDIV3_FIMC1_SHIFT,
-	.reg_divider	= S5PC100_CLKDIV3,
-	.reg_source	= S5PC100_CLKSRC2,
-};
-
-static struct clksrc_clk clk_fimc2 = {
-	.clk	= {
-		.name		= "fimc",
-		.id		= 2,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK1_FIMC2,
-		.enable		= s5pc100_sclk1_ctrl,
-		.set_parent	= s5pc100_setparent_clksrc,
-		.get_rate	= s5pc100_getrate_clksrc,
-		.set_rate	= s5pc100_setrate_clksrc,
-		.round_rate	= s5pc100_roundrate_clksrc,
-	},
-	.shift		= S5PC100_CLKSRC2_FIMC2_SHIFT,
-	.mask		= S5PC100_CLKSRC2_FIMC2_MASK,
-	.sources	= &clkset_lcd_fimc,
-	.divider_shift	= S5PC100_CLKDIV3_FIMC2_SHIFT,
-	.reg_divider	= S5PC100_CLKDIV3,
-	.reg_source	= S5PC100_CLKSRC2,
-};
-
 static struct clk *clkset_mmc_list[] = {
 	&clk_mout_epll.clk,
 	&clk_dout_mpll,
@@ -878,69 +598,11 @@ static struct clk *clkset_mmc_list[] = {
 	&clk_mout_hpll.clk ,
 };
 
-static struct clk_sources clkset_mmc = {
+static struct clksrc_sources clkset_mmc = {
 	.sources	= clkset_mmc_list,
 	.nr_sources	= ARRAY_SIZE(clkset_mmc_list),
 };
 
-static struct clksrc_clk clk_mmc0 = {
-	.clk	= {
-		.name		= "mmc_bus",
-		.id		= 0,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC0,
-		.enable		= s5pc100_sclk0_ctrl,
-		.set_parent	= s5pc100_setparent_clksrc,
-		.get_rate	= s5pc100_getrate_clksrc,
-		.set_rate	= s5pc100_setrate_clksrc,
-		.round_rate	= s5pc100_roundrate_clksrc,
-	},
-	.shift		= S5PC100_CLKSRC2_MMC0_SHIFT,
-	.mask		= S5PC100_CLKSRC2_MMC0_MASK,
-	.sources	= &clkset_mmc,
-	.divider_shift	= S5PC100_CLKDIV3_MMC0_SHIFT,
-	.reg_divider	= S5PC100_CLKDIV3,
-	.reg_source	= S5PC100_CLKSRC2,
-};
-
-static struct clksrc_clk clk_mmc1 = {
-	.clk	= {
-		.name		= "mmc_bus",
-		.id		= 1,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC1,
-		.enable		= s5pc100_sclk0_ctrl,
-		.set_parent	= s5pc100_setparent_clksrc,
-		.get_rate	= s5pc100_getrate_clksrc,
-		.set_rate	= s5pc100_setrate_clksrc,
-		.round_rate	= s5pc100_roundrate_clksrc,
-	},
-	.shift		= S5PC100_CLKSRC2_MMC1_SHIFT,
-	.mask		= S5PC100_CLKSRC2_MMC1_MASK,
-	.sources	= &clkset_mmc,
-	.divider_shift	= S5PC100_CLKDIV3_MMC1_SHIFT,
-	.reg_divider	= S5PC100_CLKDIV3,
-	.reg_source	= S5PC100_CLKSRC2,
-};
-
-static struct clksrc_clk clk_mmc2 = {
-	.clk	= {
-		.name		= "mmc_bus",
-		.id		= 2,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC2,
-		.enable		= s5pc100_sclk0_ctrl,
-		.set_parent	= s5pc100_setparent_clksrc,
-		.get_rate	= s5pc100_getrate_clksrc,
-		.set_rate	= s5pc100_setrate_clksrc,
-		.round_rate	= s5pc100_roundrate_clksrc,
-	},
-	.shift		= S5PC100_CLKSRC2_MMC2_SHIFT,
-	.mask		= S5PC100_CLKSRC2_MMC2_MASK,
-	.sources	= &clkset_mmc,
-	.divider_shift	= S5PC100_CLKDIV3_MMC2_SHIFT,
-	.reg_divider	= S5PC100_CLKDIV3,
-	.reg_source	= S5PC100_CLKSRC2,
-};
-
-
 static struct clk *clkset_usbhost_list[] = {
 	&clk_mout_epll.clk,
 	&clk_dout_mpll,
@@ -948,28 +610,141 @@ static struct clk *clkset_usbhost_list[] = {
 	&clk_48m,
 };
 
-static struct clk_sources clkset_usbhost = {
+static struct clksrc_sources clkset_usbhost = {
 	.sources	= clkset_usbhost_list,
 	.nr_sources	= ARRAY_SIZE(clkset_usbhost_list),
 };
 
-static struct clksrc_clk clk_usbhost = {
-	.clk	= {
-		.name		= "usbhost",
-		.id		= -1,
-		.ctrlbit        = S5PC100_CLKGATE_SCLK0_USBHOST,
-		.enable		= s5pc100_sclk0_ctrl,
-		.set_parent	= s5pc100_setparent_clksrc,
-		.get_rate	= s5pc100_getrate_clksrc,
-		.set_rate	= s5pc100_setrate_clksrc,
-		.round_rate	= s5pc100_roundrate_clksrc,
-	},
-	.shift		= S5PC100_CLKSRC1_UHOST_SHIFT,
-	.mask		= S5PC100_CLKSRC1_UHOST_MASK,
-	.sources	= &clkset_usbhost,
-	.divider_shift	= S5PC100_CLKDIV2_UHOST_SHIFT,
-	.reg_divider	= S5PC100_CLKDIV2,
-	.reg_source	= S5PC100_CLKSRC1,
+static struct clksrc_clk clksrc_clks[] = {
+	{
+		.clk	= {
+			.name		= "spi_bus",
+			.id		= 0,
+			.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI0,
+			.enable		= s5pc100_sclk0_ctrl,
+
+		},
+		.sources = &clkset_spi,
+		.reg_div = { .reg = S5PC100_CLKDIV2, .shift = 4, .size = 4, },
+		.reg_src = { .reg = S5PC100_CLKSRC1, .shift = 4, .size = 2, },
+	}, {
+		.clk	= {
+			.name		= "spi_bus",
+			.id		= 1,
+			.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI1,
+			.enable		= s5pc100_sclk0_ctrl,
+		},
+		.sources = &clkset_spi,
+		.reg_div = { .reg = S5PC100_CLKDIV2, .shift = 8, .size = 4, },
+		.reg_src = { .reg = S5PC100_CLKSRC1, .shift = 8, .size = 2, },
+	}, {
+		.clk	= {
+			.name		= "spi_bus",
+			.id		= 2,
+			.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI2,
+			.enable		= s5pc100_sclk0_ctrl,
+		},
+		.sources = &clkset_spi,
+		.reg_div = { .reg = S5PC100_CLKDIV2, .shift = 12, .size = 4, },
+		.reg_src = { .reg = S5PC100_CLKSRC1, .shift = 12, .size = 2, },
+	}, {
+		.clk	= {
+			.name		= "uclk1",
+			.id		= -1,
+			.ctrlbit        = S5PC100_CLKGATE_SCLK0_UART,
+			.enable		= s5pc100_sclk0_ctrl,
+		},
+		.sources = &clkset_uart,
+		.reg_div = { .reg = S5PC100_CLKDIV2, .shift = 0, .size = 3, },
+		.reg_src = { .reg = S5PC100_CLKSRC1, .shift = 0, .size = 1, },
+	}, {
+		.clk	= {
+			.name		= "spdif",
+			.id		= -1,
+		},
+		.sources	= &clkset_spdif,
+		.reg_src = { .reg = S5PC100_CLKSRC3, .shift = 24, .size = 2, },
+	}, {
+		.clk	= {
+			.name		= "lcd",
+			.id		= -1,
+			.ctrlbit	= S5PC100_CLKGATE_SCLK1_LCD,
+			.enable		= s5pc100_sclk1_ctrl,
+		},
+		.sources = &clkset_lcd_fimc,
+		.reg_div = { .reg = S5PC100_CLKDIV3, .shift = 12, .size = 4, },
+		.reg_src = { .reg = S5PC100_CLKSRC2, .shift = 12, .size = 2, },
+	}, {
+		.clk	= {
+			.name		= "fimc",
+			.id		= 0,
+			.ctrlbit	= S5PC100_CLKGATE_SCLK1_FIMC0,
+			.enable		= s5pc100_sclk1_ctrl,
+		},
+		.sources = &clkset_lcd_fimc,
+		.reg_div = { .reg = S5PC100_CLKDIV3, .shift = 16, .size = 4, },
+		.reg_src = { .reg = S5PC100_CLKSRC2, .shift = 16, .size = 2, },
+	}, {
+		.clk	= {
+			.name		= "fimc",
+			.id		= 1,
+			.ctrlbit	= S5PC100_CLKGATE_SCLK1_FIMC1,
+			.enable		= s5pc100_sclk1_ctrl,
+		},
+		.sources	= &clkset_lcd_fimc,
+		.reg_div = { .reg = S5PC100_CLKDIV3, .shift = 20, .size = 4, },
+		.reg_src = { .reg = S5PC100_CLKSRC2, .shift = 20, .size = 2, },
+	}, {
+		.clk	= {
+			.name		= "fimc",
+			.id		= 2,
+			.ctrlbit	= S5PC100_CLKGATE_SCLK1_FIMC2,
+			.enable		= s5pc100_sclk1_ctrl,
+		},
+		.sources = &clkset_lcd_fimc,
+		.reg_div = { .reg = S5PC100_CLKDIV3, .shift = 24, .size = 4, },
+		.reg_src = { .reg = S5PC100_CLKSRC2, .shift = 24, .size = 2, },
+	}, {
+		.clk	= {
+			.name		= "mmc_bus",
+			.id		= 0,
+			.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC0,
+			.enable		= s5pc100_sclk0_ctrl,
+		},
+		.sources = &clkset_mmc,
+		.reg_div = { .reg = S5PC100_CLKDIV3, .shift = 0, .size = 4, },
+		.reg_src = { .reg = S5PC100_CLKSRC2, .shift = 0, .size = 2, },
+	}, {
+		.clk	= {
+			.name		= "mmc_bus",
+			.id		= 1,
+			.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC1,
+			.enable		= s5pc100_sclk0_ctrl,
+		},
+		.sources = &clkset_mmc,
+		.reg_div = { .reg = S5PC100_CLKDIV3, .shift = 4, .size = 4, },
+		.reg_src = { .reg = S5PC100_CLKSRC2, .shift = 4, .size = 2, },
+	}, {
+		.clk	= {
+			.name		= "mmc_bus",
+			.id		= 2,
+			.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC2,
+			.enable		= s5pc100_sclk0_ctrl,
+		},
+		.sources	= &clkset_mmc,
+		.reg_div = { .reg = S5PC100_CLKDIV3, .shift = 8, .size = 4, },
+		.reg_src = { .reg = S5PC100_CLKSRC2, .shift = 8, .size = 2, },
+	}, {
+		.clk	= {
+			.name		= "usbhost",
+			.id		= -1,
+			.ctrlbit        = S5PC100_CLKGATE_SCLK0_USBHOST,
+			.enable		= s5pc100_sclk0_ctrl,
+		},
+		.sources = &clkset_usbhost,
+		.reg_div = { .reg = S5PC100_CLKDIV2, .shift = 20, .size = 4, },
+		.reg_src = { .reg = S5PC100_CLKSRC1, .shift = 20, .size = 2, },
+	}
 };
 
 /* Clock initialisation code */
@@ -981,45 +756,8 @@ static struct clksrc_clk *init_parents[] = {
 	&clk_mout_onenand,
 	&clk_mout_epll,
 	&clk_mout_hpll,
-	&clk_spi0,
-	&clk_spi1,
-	&clk_spi2,
-	&clk_uart_uclk1,
-	&clk_audio0,
-	&clk_audio1,
-	&clk_audio2,
-	&clk_spdif,
-	&clk_lcd,
-	&clk_fimc0,
-	&clk_fimc1,
-	&clk_fimc2,
-	&clk_mmc0,
-	&clk_mmc1,
-	&clk_mmc2,
-	&clk_usbhost,
 };
 
-static void __init_or_cpufreq s5pc100_set_clksrc(struct clksrc_clk *clk)
-{
-	struct clk_sources *srcs = clk->sources;
-	u32 clksrc = __raw_readl(clk->reg_source);
-
-	clksrc &= clk->mask;
-	clksrc >>= clk->shift;
-
-	if (clksrc > srcs->nr_sources || !srcs->sources[clksrc]) {
-		printk(KERN_ERR "%s: bad source %d\n",
-		       clk->clk.name, clksrc);
-		return;
-	}
-
-	clk->clk.parent = srcs->sources[clksrc];
-
-	printk(KERN_INFO "%s: source is %s (%d), rate is %ld.%03ld MHz\n",
-		clk->clk.name, clk->clk.parent->name, clksrc,
-		print_mhz(clk_get_rate(&clk->clk)));
-}
-
 #define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
 
 void __init_or_cpufreq s5pc100_setup_clocks(void)
@@ -1083,17 +821,25 @@ void __init_or_cpufreq s5pc100_setup_clocks(void)
 	clk_f.rate = armclk;
 
 	for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
-		s5pc100_set_clksrc(init_parents[ptr]);
+		s3c_set_clksrc(init_parents[ptr], true);
+
+	for (ptr = 0; ptr < ARRAY_SIZE(clksrc_audio); ptr++)
+		s3c_set_clksrc(clksrc_audio + ptr, true);
+
+	for (ptr = 0; ptr < ARRAY_SIZE(clksrc_clks); ptr++)
+		s3c_set_clksrc(clksrc_clks + ptr, true);
 }
 
 static struct clk *clks[] __initdata = {
 	&clk_ext_xtal_mux,
-	&clk_mout_apll.clk,
 	&clk_dout_apll,
 	&clk_dout_d0_bus,
 	&clk_dout_pclkd0,
 	&clk_dout_apll2,
+	&clk_mout_apll.clk,
 	&clk_mout_mpll.clk,
+	&clk_mout_epll.clk,
+	&clk_mout_hpll.clk,
 	&clk_mout_am.clk,
 	&clk_dout_d1_bus,
 	&clk_mout_onenand.clk,
@@ -1101,29 +847,12 @@ static struct clk *clks[] __initdata = {
 	&clk_dout_mpll2,
 	&clk_dout_cam,
 	&clk_dout_mpll,
-	&clk_mout_epll.clk,
 	&clk_fout_epll,
 	&clk_iis_cd0,
 	&clk_iis_cd1,
 	&clk_iis_cd2,
 	&clk_pcm_cd0,
 	&clk_pcm_cd1,
-	&clk_spi0.clk,
-	&clk_spi1.clk,
-	&clk_spi2.clk,
-	&clk_uart_uclk1.clk,
-	&clk_audio0.clk,
-	&clk_audio1.clk,
-	&clk_audio2.clk,
-	&clk_spdif.clk,
-	&clk_lcd.clk,
-	&clk_fimc0.clk,
-	&clk_fimc1.clk,
-	&clk_fimc2.clk,
-	&clk_mmc0.clk,
-	&clk_mmc1.clk,
-	&clk_mmc2.clk,
-	&clk_usbhost.clk,
 	&clk_arm,
 };
 
@@ -1141,4 +870,7 @@ void __init s5pc100_register_clocks(void)
 			       clkp->name, ret);
 		}
 	}
+
+	s3c_register_clksrc(clksrc_audio, ARRAY_SIZE(clksrc_audio));
+	s3c_register_clksrc(clksrc_clks, ARRAY_SIZE(clksrc_clks));
 }
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 486a0d6301e7..d552c65fa1b0 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -7,11 +7,240 @@
 config PLAT_SAMSUNG
 	bool
 	depends on ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX || ARCH_S5PC1XX
+	select NO_IOPORT
 	default y
 	help
 	  Base platform code for all Samsung SoC based systems
 
 if PLAT_SAMSUNG
 
+# boot configurations
+
+comment "Boot options"
+
+config S3C_BOOT_WATCHDOG
+	bool "S3C Initialisation watchdog"
+	depends on S3C2410_WATCHDOG
+	help
+	  Say y to enable the watchdog during the kernel decompression
+	  stage. If the kernel fails to uncompress, then the watchdog
+	  will trigger a reset and the system should restart.
+
+config S3C_BOOT_ERROR_RESET
+	bool "S3C Reboot on decompression error"
+	help
+	  Say y here to use the watchdog to reset the system if the
+	  kernel decompressor detects an error during decompression.
+
+config S3C_BOOT_UART_FORCE_FIFO
+       bool "Force UART FIFO on during boot process"
+       default y
+       help
+         Say Y here to force the UART FIFOs on during the kernel
+	 uncompressor
+
+
+config S3C_LOWLEVEL_UART_PORT
+	int "S3C UART to use for low-level messages"
+	default 0
+	help
+	  Choice of which UART port to use for the low-level messages,
+	  such as the `Uncompressing...` at start time. The value of
+	  this configuration should be between zero and two. The port
+	  must have been initialised by the boot-loader before use.
+
+# clock options
+
+config SAMSUNG_CLKSRC
+	bool
+	help
+	  Select the clock code for the clksrc implementation
+	  used by newer systems such as the S3C64XX.
+
+# options for IRQ support
+
+config SAMSUNG_IRQ_VIC_TIMER
+       bool
+       help
+         Internal configuration to build the VIC timer interrupt code.
+
+config SAMSUNG_IRQ_UART
+       bool
+       help
+         Internal configuration to build the IRQ UART demux code.
+
+# options for gpio configuration support
+
+config SAMSUNG_GPIOLIB_4BIT
+	bool
+	help
+	  GPIOlib file contains the 4 bit modification functions for gpio
+	  configuration. GPIOlib shall be compiled only for S3C64XX and S5P
+	  series of processors.
+
+config S3C_GPIO_CFG_S3C24XX
+	bool
+	help
+	  Internal configuration to enable S3C24XX style GPIO configuration
+	  functions.
+
+config S3C_GPIO_CFG_S3C64XX
+	bool
+	help
+	  Internal configuration to enable S3C64XX style GPIO configuration
+	  functions.
+
+config S5P_GPIO_CFG_S5PC1XX
+	bool
+	help
+	  Internal configuration to enable S5PC1XX style GPIO configuration
+	  functions.
+
+config S3C_GPIO_PULL_UPDOWN
+	bool
+	help
+	  Internal configuration to enable the correct GPIO pull helper
+
+config S3C_GPIO_PULL_DOWN
+	bool
+	help
+	  Internal configuration to enable the correct GPIO pull helper
+
+config S3C_GPIO_PULL_UP
+	bool
+	help
+	  Internal configuration to enable the correct GPIO pull helper
+
+config SAMSUNG_GPIO_EXTRA
+	int "Number of additional GPIO pins"
+	default 0
+	help
+	  Use additional GPIO space in addition to the GPIO's the SOC
+	  provides. This allows expanding the GPIO space for use with
+	  GPIO expanders.
+
+config S3C_GPIO_SPACE
+	int "Space between gpio banks"
+	default 0
+	help
+	  Add a number of spare GPIO entries between each bank for debugging
+	  purposes. This allows any problems where an counter overflows from
+	  one bank to another to be caught, at the expense of using a little
+	  more memory.
+
+config S3C_GPIO_TRACK
+	bool
+	help
+	  Internal configuration option to enable the s3c specific gpio
+	  chip tracking if the platform requires it.
+
+# ADC driver
+
+config S3C_ADC
+	bool "ADC common driver support"
+	help
+	  Core support for the ADC block found in the Samsung SoC systems
+	  for drivers such as the touchscreen and hwmon to use to share
+	  this resource.
+
+# device definitions to compile in
+
+config S3C_DEV_HSMMC
+	bool
+	help
+	  Compile in platform device definitions for HSMMC code
+
+config S3C_DEV_HSMMC1
+	bool
+	help
+	  Compile in platform device definitions for HSMMC channel 1
+
+config S3C_DEV_HSMMC2
+	bool
+	help
+	  Compile in platform device definitions for HSMMC channel 2
+
+config S3C_DEV_I2C1
+	bool
+	help
+	  Compile in platform device definitions for I2C channel 1
+
+config S3C_DEV_FB
+	bool
+	help
+	  Compile in platform device definition for framebuffer
+
+config S3C_DEV_USB_HOST
+	bool
+	help
+	  Compile in platform device definition for USB host.
+
+config S3C_DEV_USB_HSOTG
+	bool
+	help
+	  Compile in platform device definition for USB high-speed OtG
+
+config S3C_DEV_NAND
+	bool
+	help
+	  Compile in platform device definition for NAND controller
+
+config S3C64XX_DEV_SPI
+	bool
+	help
+	  Compile in platform device definitions for S3C64XX's type
+	  SPI controllers.
+
+# DMA
+
+config S3C_DMA
+	bool
+	help
+	  Internal configuration for S3C DMA core
+
+comment "Power management"
+
+config SAMSUNG_PM_DEBUG
+	bool "S3C2410 PM Suspend debug"
+	depends on PM
+	help
+	  Say Y here if you want verbose debugging from the PM Suspend and
+	  Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
+	  for more information.
+
+config S3C_PM_DEBUG_LED_SMDK
+       bool "SMDK LED suspend/resume debugging"
+       depends on PM && (MACH_SMDK6410)
+       help
+         Say Y here to enable the use of the SMDK LEDs on the baseboard
+	 for debugging of the state of the suspend and resume process.
+
+	 Note, this currently only works for S3C64XX based SMDK boards.
+
+config SAMSUNG_PM_CHECK
+	bool "S3C2410 PM Suspend Memory CRC"
+	depends on PM && CRC32
+	help
+	  Enable the PM code's memory area checksum over sleep. This option
+	  will generate CRCs of all blocks of memory, and store them before
+	  going to sleep. The blocks are then checked on resume for any
+	  errors.
+
+	  Note, this can take several seconds depending on memory size
+	  and CPU speed.
+
+	  See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
+
+config SAMSUNG_PM_CHECK_CHUNKSIZE
+	int "S3C2410 PM Suspend CRC Chunksize (KiB)"
+	depends on PM && SAMSUNG_PM_CHECK
+	default 64
+	help
+	  Set the chunksize in Kilobytes of the CRC for checking memory
+	  corruption over suspend and resume. A smaller value will mean that
+	  the CRC data block will take more memory, but wil identify any
+	  faults with better precision.
+
+	  See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
 
 endif
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 4478b9f7dc34..22c89d08f6e5 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -9,3 +9,48 @@ obj-m				:=
 obj-n				:= dummy.o
 obj-				:=
 
+# Objects we always build independent of SoC choice
+
+obj-y				+= init.o
+obj-y				+= time.o
+obj-y				+= clock.o
+obj-y				+= pwm-clock.o
+obj-y				+= gpio.o
+obj-y				+= gpio-config.o
+
+obj-$(CONFIG_SAMSUNG_GPIOLIB_4BIT)	+= gpiolib.o
+obj-$(CONFIG_SAMSUNG_CLKSRC)	+= clock-clksrc.o
+
+obj-$(CONFIG_SAMSUNG_IRQ_UART)	+= irq-uart.o
+obj-$(CONFIG_SAMSUNG_IRQ_VIC_TIMER) += irq-vic-timer.o
+
+# ADC
+
+obj-$(CONFIG_S3C_ADC)	+= adc.o
+
+# devices
+
+obj-$(CONFIG_S3C_DEV_HSMMC)	+= dev-hsmmc.o
+obj-$(CONFIG_S3C_DEV_HSMMC1)	+= dev-hsmmc1.o
+obj-$(CONFIG_S3C_DEV_HSMMC2)	+= dev-hsmmc2.o
+obj-y				+= dev-i2c0.o
+obj-$(CONFIG_S3C_DEV_I2C1)	+= dev-i2c1.o
+obj-$(CONFIG_S3C_DEV_FB)	+= dev-fb.o
+obj-y				+= dev-uart.o
+obj-$(CONFIG_S3C_DEV_USB_HOST)	+= dev-usb.o
+obj-$(CONFIG_S3C_DEV_USB_HSOTG)	+= dev-usb-hsotg.o
+obj-$(CONFIG_S3C_DEV_NAND)	+= dev-nand.o
+
+# DMA support
+
+obj-$(CONFIG_S3C_DMA)		+= dma.o
+
+# PM support
+
+obj-$(CONFIG_PM)		+= pm.o
+obj-$(CONFIG_PM)		+= pm-gpio.o
+obj-$(CONFIG_SAMSUNG_PM_CHECK)	+= pm-check.o
+
+# PWM support
+
+obj-$(CONFIG_HAVE_PWM)		+= pwm.o
diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-samsung/adc.c
index ce47627f3368..0b5833b9ac5b 100644
--- a/arch/arm/plat-s3c24xx/adc.c
+++ b/arch/arm/plat-samsung/adc.c
@@ -1,10 +1,10 @@
-/* arch/arm/plat-s3c24xx/adc.c
+/* arch/arm/plat-samsung/adc.c
  *
  * Copyright (c) 2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
  *
- * S3C24XX ADC device core
+ * Samsung ADC device core
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -37,6 +37,11 @@
  * action is required.
  */
 
+enum s3c_cpu_type {
+	TYPE_S3C24XX,
+	TYPE_S3C64XX
+};
+
 struct s3c_adc_client {
 	struct platform_device	*pdev;
 	struct list_head	 pend;
@@ -257,12 +262,13 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw)
 {
 	struct adc_device *adc = pw;
 	struct s3c_adc_client *client = adc->cur;
+	enum s3c_cpu_type cpu = platform_get_device_id(adc->pdev)->driver_data;
 	unsigned long flags;
 	unsigned data0, data1;
 
 	if (!client) {
 		dev_warn(&adc->pdev->dev, "%s: no adc pending\n", __func__);
-		return IRQ_HANDLED;
+		goto exit;
 	}
 
 	data0 = readl(adc->regs + S3C2410_ADCDAT0);
@@ -271,9 +277,17 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw)
 
 	client->nr_samples--;
 
+	if (cpu == TYPE_S3C64XX) {
+		/* S3C64XX ADC resolution is 12-bit */
+		data0 &= 0xfff;
+		data1 &= 0xfff;
+	} else {
+		data0 &= 0x3ff;
+		data1 &= 0x3ff;
+	}
+
 	if (client->convert_cb)
-		(client->convert_cb)(client, data0 & 0x3ff, data1 & 0x3ff,
-				     &client->nr_samples);
+		(client->convert_cb)(client, data0, data1, &client->nr_samples);
 
 	if (client->nr_samples > 0) {
 		/* fire another conversion for this */
@@ -289,6 +303,11 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw)
 		local_irq_restore(flags);
 	}
 
+exit:
+	if (cpu == TYPE_S3C64XX) {
+		/* Clear ADC interrupt */
+		writel(0, adc->regs + S3C64XX_ADCCLRINT);
+	}
 	return IRQ_HANDLED;
 }
 
@@ -298,6 +317,7 @@ static int s3c_adc_probe(struct platform_device *pdev)
 	struct adc_device *adc;
 	struct resource *regs;
 	int ret;
+	unsigned tmp;
 
 	adc = kzalloc(sizeof(struct adc_device), GFP_KERNEL);
 	if (adc == NULL) {
@@ -344,8 +364,12 @@ static int s3c_adc_probe(struct platform_device *pdev)
 
 	clk_enable(adc->clk);
 
-	writel(adc->prescale | S3C2410_ADCCON_PRSCEN,
-	       adc->regs + S3C2410_ADCCON);
+	tmp = adc->prescale | S3C2410_ADCCON_PRSCEN;
+	if (platform_get_device_id(pdev)->driver_data == TYPE_S3C64XX) {
+		/* Enable 12-bit ADC resolution */
+		tmp |= S3C64XX_ADCCON_RESSEL;
+	}
+	writel(tmp, adc->regs + S3C2410_ADCCON);
 
 	dev_info(dev, "attached adc driver\n");
 
@@ -388,6 +412,7 @@ static int s3c_adc_suspend(struct platform_device *pdev, pm_message_t state)
 	con |= S3C2410_ADCCON_STDBM;
 	writel(con, adc->regs + S3C2410_ADCCON);
 
+	disable_irq(adc->irq);
 	clk_disable(adc->clk);
 
 	return 0;
@@ -398,6 +423,7 @@ static int s3c_adc_resume(struct platform_device *pdev)
 	struct adc_device *adc = platform_get_drvdata(pdev);
 
 	clk_enable(adc->clk);
+	enable_irq(adc->irq);
 
 	writel(adc->prescale | S3C2410_ADCCON_PRSCEN,
 	       adc->regs + S3C2410_ADCCON);
@@ -410,9 +436,22 @@ static int s3c_adc_resume(struct platform_device *pdev)
 #define s3c_adc_resume NULL
 #endif
 
+static struct platform_device_id s3c_adc_driver_ids[] = {
+	{
+		.name           = "s3c24xx-adc",
+		.driver_data    = TYPE_S3C24XX,
+	}, {
+		.name           = "s3c64xx-adc",
+		.driver_data    = TYPE_S3C64XX,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(platform, s3c_adc_driver_ids);
+
 static struct platform_driver s3c_adc_driver = {
+	.id_table	= s3c_adc_driver_ids,
 	.driver		= {
-		.name	= "s3c24xx-adc",
+		.name	= "s3c-adc",
 		.owner	= THIS_MODULE,
 	},
 	.probe		= s3c_adc_probe,
diff --git a/arch/arm/plat-samsung/clock-clksrc.c b/arch/arm/plat-samsung/clock-clksrc.c
new file mode 100644
index 000000000000..ae8b8507663f
--- /dev/null
+++ b/arch/arm/plat-samsung/clock-clksrc.c
@@ -0,0 +1,212 @@
+/* linux/arch/arm/plat-samsung/clock-clksrc.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+
+#include <plat/clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/cpu-freq.h>
+
+static inline struct clksrc_clk *to_clksrc(struct clk *clk)
+{
+	return container_of(clk, struct clksrc_clk, clk);
+}
+
+static inline u32 bit_mask(u32 shift, u32 nr_bits)
+{
+	u32 mask = 0xffffffff >> (32 - nr_bits);
+
+	return mask << shift;
+}
+
+static unsigned long s3c_getrate_clksrc(struct clk *clk)
+{
+	struct clksrc_clk *sclk = to_clksrc(clk);
+	unsigned long rate = clk_get_rate(clk->parent);
+	u32 clkdiv = __raw_readl(sclk->reg_div.reg);
+	u32 mask = bit_mask(sclk->reg_div.shift, sclk->reg_div.size);
+
+	clkdiv &= mask;
+	clkdiv >>= sclk->reg_div.shift;
+	clkdiv++;
+
+	rate /= clkdiv;
+	return rate;
+}
+
+static int s3c_setrate_clksrc(struct clk *clk, unsigned long rate)
+{
+	struct clksrc_clk *sclk = to_clksrc(clk);
+	void __iomem *reg = sclk->reg_div.reg;
+	unsigned int div;
+	u32 mask = bit_mask(sclk->reg_div.shift, sclk->reg_div.size);
+	u32 val;
+
+	rate = clk_round_rate(clk, rate);
+	div = clk_get_rate(clk->parent) / rate;
+	if (div > (1 << sclk->reg_div.size))
+		return -EINVAL;
+
+	val = __raw_readl(reg);
+	val &= ~mask;
+	val |= (div - 1) << sclk->reg_div.shift;
+	__raw_writel(val, reg);
+
+	return 0;
+}
+
+static int s3c_setparent_clksrc(struct clk *clk, struct clk *parent)
+{
+	struct clksrc_clk *sclk = to_clksrc(clk);
+	struct clksrc_sources *srcs = sclk->sources;
+	u32 clksrc = __raw_readl(sclk->reg_src.reg);
+	u32 mask = bit_mask(sclk->reg_src.shift, sclk->reg_src.size);
+	int src_nr = -1;
+	int ptr;
+
+	for (ptr = 0; ptr < srcs->nr_sources; ptr++)
+		if (srcs->sources[ptr] == parent) {
+			src_nr = ptr;
+			break;
+		}
+
+	if (src_nr >= 0) {
+		clk->parent = parent;
+
+		clksrc &= ~mask;
+		clksrc |= src_nr << sclk->reg_src.shift;
+
+		__raw_writel(clksrc, sclk->reg_src.reg);
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static unsigned long s3c_roundrate_clksrc(struct clk *clk,
+					      unsigned long rate)
+{
+	struct clksrc_clk *sclk = to_clksrc(clk);
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	int max_div = 1 << sclk->reg_div.size;
+	int div;
+
+	if (rate >= parent_rate)
+		rate = parent_rate;
+	else {
+		div = parent_rate / rate;
+		if (parent_rate % rate)
+			div++;
+
+		if (div == 0)
+			div = 1;
+		if (div > max_div)
+			div = max_div;
+
+		rate = parent_rate / div;
+	}
+
+	return rate;
+}
+
+/* Clock initialisation code */
+
+void __init_or_cpufreq s3c_set_clksrc(struct clksrc_clk *clk, bool announce)
+{
+	struct clksrc_sources *srcs = clk->sources;
+	u32 mask = bit_mask(clk->reg_src.shift, clk->reg_src.size);
+	u32 clksrc;
+
+	if (!clk->reg_src.reg) {
+		if (!clk->clk.parent)
+			printk(KERN_ERR "%s: no parent clock specified\n",
+				clk->clk.name);
+		return;
+	}
+
+	clksrc = __raw_readl(clk->reg_src.reg);
+	clksrc &= mask;
+	clksrc >>= clk->reg_src.shift;
+
+	if (clksrc > srcs->nr_sources || !srcs->sources[clksrc]) {
+		printk(KERN_ERR "%s: bad source %d\n",
+		       clk->clk.name, clksrc);
+		return;
+	}
+
+	clk->clk.parent = srcs->sources[clksrc];
+
+	if (announce)
+		printk(KERN_INFO "%s: source is %s (%d), rate is %ld\n",
+		       clk->clk.name, clk->clk.parent->name, clksrc,
+		       clk_get_rate(&clk->clk));
+}
+
+static struct clk_ops clksrc_ops = {
+	.set_parent	= s3c_setparent_clksrc,
+	.get_rate	= s3c_getrate_clksrc,
+	.set_rate	= s3c_setrate_clksrc,
+	.round_rate	= s3c_roundrate_clksrc,
+};
+
+static struct clk_ops clksrc_ops_nodiv = {
+	.set_parent	= s3c_setparent_clksrc,
+};
+
+static struct clk_ops clksrc_ops_nosrc = {
+	.get_rate	= s3c_getrate_clksrc,
+	.set_rate	= s3c_setrate_clksrc,
+	.round_rate	= s3c_roundrate_clksrc,
+};
+
+void __init s3c_register_clksrc(struct clksrc_clk *clksrc, int size)
+{
+	int ret;
+
+	for (; size > 0; size--, clksrc++) {
+		if (!clksrc->reg_div.reg && !clksrc->reg_src.reg)
+			printk(KERN_ERR "%s: clock %s has no registers set\n",
+			       __func__, clksrc->clk.name);
+
+		/* fill in the default functions */
+
+		if (!clksrc->clk.ops) {
+			if (!clksrc->reg_div.reg)
+				clksrc->clk.ops = &clksrc_ops_nodiv;
+			else if (!clksrc->reg_src.reg)
+				clksrc->clk.ops = &clksrc_ops_nosrc;
+			else
+				clksrc->clk.ops = &clksrc_ops;
+		}
+
+		/* setup the clocksource, but do not announce it
+		 * as it may be re-set by the setup routines
+		 * called after the rest of the clocks have been
+		 * registered
+		 */
+		s3c_set_clksrc(clksrc, false);
+
+		ret = s3c24xx_register_clock(&clksrc->clk);
+
+		if (ret < 0) {
+			printk(KERN_ERR "%s: failed to register %s (%d)\n",
+			       __func__, clksrc->clk.name, ret);
+		}
+	}
+}
diff --git a/arch/arm/plat-s3c/clock.c b/arch/arm/plat-samsung/clock.c
index 619cfa82dcab..1b25c9d8c403 100644
--- a/arch/arm/plat-s3c/clock.c
+++ b/arch/arm/plat-samsung/clock.c
@@ -150,8 +150,8 @@ unsigned long clk_get_rate(struct clk *clk)
 	if (clk->rate != 0)
 		return clk->rate;
 
-	if (clk->get_rate != NULL)
-		return (clk->get_rate)(clk);
+	if (clk->ops != NULL && clk->ops->get_rate != NULL)
+		return (clk->ops->get_rate)(clk);
 
 	if (clk->parent != NULL)
 		return clk_get_rate(clk->parent);
@@ -161,8 +161,8 @@ unsigned long clk_get_rate(struct clk *clk)
 
 long clk_round_rate(struct clk *clk, unsigned long rate)
 {
-	if (!IS_ERR(clk) && clk->round_rate)
-		return (clk->round_rate)(clk, rate);
+	if (!IS_ERR(clk) && clk->ops && clk->ops->round_rate)
+		return (clk->ops->round_rate)(clk, rate);
 
 	return rate;
 }
@@ -178,13 +178,14 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
 	 * the clock may have been made this way by choice.
 	 */
 
-	WARN_ON(clk->set_rate == NULL);
+	WARN_ON(clk->ops == NULL);
+	WARN_ON(clk->ops && clk->ops->set_rate == NULL);
 
-	if (clk->set_rate == NULL)
+	if (clk->ops == NULL || clk->ops->set_rate == NULL)
 		return -EINVAL;
 
 	spin_lock(&clocks_lock);
-	ret = (clk->set_rate)(clk, rate);
+	ret = (clk->ops->set_rate)(clk, rate);
 	spin_unlock(&clocks_lock);
 
 	return ret;
@@ -204,8 +205,8 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
 
 	spin_lock(&clocks_lock);
 
-	if (clk->set_parent)
-		ret = (clk->set_parent)(clk, parent);
+	if (clk->ops && clk->ops->set_parent)
+		ret = (clk->ops->set_parent)(clk, parent);
 
 	spin_unlock(&clocks_lock);
 
@@ -224,12 +225,16 @@ EXPORT_SYMBOL(clk_set_parent);
 
 /* base clocks */
 
-static int clk_default_setrate(struct clk *clk, unsigned long rate)
+int clk_default_setrate(struct clk *clk, unsigned long rate)
 {
 	clk->rate = rate;
 	return 0;
 }
 
+struct clk_ops clk_ops_def_setrate = {
+	.set_rate	= clk_default_setrate,
+};
+
 struct clk clk_xtal = {
 	.name		= "xtal",
 	.id		= -1,
@@ -251,7 +256,7 @@ struct clk clk_epll = {
 struct clk clk_mpll = {
 	.name		= "mpll",
 	.id		= -1,
-	.set_rate	= clk_default_setrate,
+	.ops		= &clk_ops_def_setrate,
 };
 
 struct clk clk_upll = {
@@ -267,7 +272,6 @@ struct clk clk_f = {
 	.rate		= 0,
 	.parent		= &clk_mpll,
 	.ctrlbit	= 0,
-	.set_rate	= clk_default_setrate,
 };
 
 struct clk clk_h = {
@@ -276,7 +280,7 @@ struct clk clk_h = {
 	.rate		= 0,
 	.parent		= NULL,
 	.ctrlbit	= 0,
-	.set_rate	= clk_default_setrate,
+	.ops		= &clk_ops_def_setrate,
 };
 
 struct clk clk_p = {
@@ -285,7 +289,7 @@ struct clk clk_p = {
 	.rate		= 0,
 	.parent		= NULL,
 	.ctrlbit	= 0,
-	.set_rate	= clk_default_setrate,
+	.ops		= &clk_ops_def_setrate,
 };
 
 struct clk clk_usb_bus = {
@@ -296,7 +300,6 @@ struct clk clk_usb_bus = {
 };
 
 
-
 struct clk s3c24xx_uclk = {
 	.name		= "uclk",
 	.id		= -1,
@@ -304,6 +307,12 @@ struct clk s3c24xx_uclk = {
 
 /* initialise the clock system */
 
+/**
+ * s3c24xx_register_clock() - register a clock
+ * @clk: The clock to register
+ *
+ * Add the specified clock to the list of clocks known by the system.
+ */
 int s3c24xx_register_clock(struct clk *clk)
 {
 	if (clk->enable == NULL)
@@ -321,18 +330,52 @@ int s3c24xx_register_clock(struct clk *clk)
 	return 0;
 }
 
+/**
+ * s3c24xx_register_clocks() - register an array of clock pointers
+ * @clks: Pointer to an array of struct clk pointers
+ * @nr_clks: The number of clocks in the @clks array.
+ *
+ * Call s3c24xx_register_clock() for all the clock pointers contained
+ * in the @clks list. Returns the number of failures.
+ */
 int s3c24xx_register_clocks(struct clk **clks, int nr_clks)
 {
 	int fails = 0;
 
 	for (; nr_clks > 0; nr_clks--, clks++) {
-		if (s3c24xx_register_clock(*clks) < 0)
+		if (s3c24xx_register_clock(*clks) < 0) {
+			struct clk *clk = *clks;
+			printk(KERN_ERR "%s: failed to register %p: %s\n",
+			       __func__, clk, clk->name);
 			fails++;
+		}
 	}
 
 	return fails;
 }
 
+/**
+ * s3c_register_clocks() - register an array of clocks
+ * @clkp: Pointer to the first clock in the array.
+ * @nr_clks: Number of clocks to register.
+ *
+ * Call s3c24xx_register_clock() on the @clkp array given, printing an
+ * error if it fails to register the clock (unlikely).
+ */
+void __init s3c_register_clocks(struct clk *clkp, int nr_clks)
+{
+	int ret;
+
+	for (; nr_clks > 0; nr_clks--, clkp++) {
+		ret = s3c24xx_register_clock(clkp);
+
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+	}
+}
+
 /* initalise all the clocks */
 
 int __init s3c24xx_register_baseclocks(unsigned long xtal)
diff --git a/arch/arm/plat-s3c/dev-fb.c b/arch/arm/plat-samsung/dev-fb.c
index a90198fc4b0f..a90198fc4b0f 100644
--- a/arch/arm/plat-s3c/dev-fb.c
+++ b/arch/arm/plat-samsung/dev-fb.c
diff --git a/arch/arm/plat-s3c/dev-hsmmc.c b/arch/arm/plat-samsung/dev-hsmmc.c
index 4c05b39810e2..4c05b39810e2 100644
--- a/arch/arm/plat-s3c/dev-hsmmc.c
+++ b/arch/arm/plat-samsung/dev-hsmmc.c
diff --git a/arch/arm/plat-s3c/dev-hsmmc1.c b/arch/arm/plat-samsung/dev-hsmmc1.c
index e49bc4cd0ee6..e49bc4cd0ee6 100644
--- a/arch/arm/plat-s3c/dev-hsmmc1.c
+++ b/arch/arm/plat-samsung/dev-hsmmc1.c
diff --git a/arch/arm/plat-s3c/dev-hsmmc2.c b/arch/arm/plat-samsung/dev-hsmmc2.c
index 824580bc0e06..824580bc0e06 100644
--- a/arch/arm/plat-s3c/dev-hsmmc2.c
+++ b/arch/arm/plat-samsung/dev-hsmmc2.c
diff --git a/arch/arm/plat-s3c/dev-i2c0.c b/arch/arm/plat-samsung/dev-i2c0.c
index 4c761529b949..4c761529b949 100644
--- a/arch/arm/plat-s3c/dev-i2c0.c
+++ b/arch/arm/plat-samsung/dev-i2c0.c
diff --git a/arch/arm/plat-s3c/dev-i2c1.c b/arch/arm/plat-samsung/dev-i2c1.c
index d44f79110506..d44f79110506 100644
--- a/arch/arm/plat-s3c/dev-i2c1.c
+++ b/arch/arm/plat-samsung/dev-i2c1.c
diff --git a/arch/arm/plat-s3c/dev-nand.c b/arch/arm/plat-samsung/dev-nand.c
index a52fb6cf618f..a52fb6cf618f 100644
--- a/arch/arm/plat-s3c/dev-nand.c
+++ b/arch/arm/plat-samsung/dev-nand.c
diff --git a/arch/arm/plat-samsung/dev-uart.c b/arch/arm/plat-samsung/dev-uart.c
new file mode 100644
index 000000000000..3776cd952450
--- /dev/null
+++ b/arch/arm/plat-samsung/dev-uart.c
@@ -0,0 +1,44 @@
+/* linux/arch/arm/plat-samsung/dev-uart.c
+ *	originally from arch/arm/plat-s3c24xx/devs.c
+ *x
+ * Copyright (c) 2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Base S3C24XX platform device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+/* uart devices */
+
+static struct platform_device s3c24xx_uart_device0 = {
+	.id		= 0,
+};
+
+static struct platform_device s3c24xx_uart_device1 = {
+	.id		= 1,
+};
+
+static struct platform_device s3c24xx_uart_device2 = {
+	.id		= 2,
+};
+
+static struct platform_device s3c24xx_uart_device3 = {
+	.id		= 3,
+};
+
+struct platform_device *s3c24xx_uart_src[4] = {
+	&s3c24xx_uart_device0,
+	&s3c24xx_uart_device1,
+	&s3c24xx_uart_device2,
+	&s3c24xx_uart_device3,
+};
+
+struct platform_device *s3c24xx_uart_devs[4] = {
+};
diff --git a/arch/arm/plat-s3c/dev-usb-hsotg.c b/arch/arm/plat-samsung/dev-usb-hsotg.c
index e2f604b51c86..33a844ab6917 100644
--- a/arch/arm/plat-s3c/dev-usb-hsotg.c
+++ b/arch/arm/plat-samsung/dev-usb-hsotg.c
@@ -14,6 +14,7 @@
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
 
 #include <mach/irqs.h>
 #include <mach/map.h>
@@ -33,9 +34,15 @@ static struct resource s3c_usb_hsotg_resources[] = {
 	},
 };
 
+static u64 s3c_hsotg_dmamask = DMA_BIT_MASK(32);
+
 struct platform_device s3c_device_usb_hsotg = {
 	.name		= "s3c-hsotg",
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(s3c_usb_hsotg_resources),
 	.resource	= s3c_usb_hsotg_resources,
+	.dev		= {
+		.dma_mask		= &s3c_hsotg_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
 };
diff --git a/arch/arm/plat-s3c/dev-usb.c b/arch/arm/plat-samsung/dev-usb.c
index 2ee85abed6d9..88165657fa53 100644
--- a/arch/arm/plat-s3c/dev-usb.c
+++ b/arch/arm/plat-samsung/dev-usb.c
@@ -19,7 +19,7 @@
 #include <mach/map.h>
 
 #include <plat/devs.h>
-
+#include <plat/usb-control.h>
 
 static struct resource s3c_usb_resource[] = {
 	[0] = {
@@ -36,7 +36,7 @@ static struct resource s3c_usb_resource[] = {
 
 static u64 s3c_device_usb_dmamask = 0xffffffffUL;
 
-struct platform_device s3c_device_usb = {
+struct platform_device s3c_device_ohci = {
 	.name		  = "s3c2410-ohci",
 	.id		  = -1,
 	.num_resources	  = ARRAY_SIZE(s3c_usb_resource),
@@ -47,4 +47,23 @@ struct platform_device s3c_device_usb = {
 	}
 };
 
-EXPORT_SYMBOL(s3c_device_usb);
+EXPORT_SYMBOL(s3c_device_ohci);
+
+/**
+ * s3c_ohci_set_platdata - initialise OHCI device platform data
+ * @info: The platform data.
+ *
+ * This call copies the @info passed in and sets the device .platform_data
+ * field to that copy. The @info is copied so that the original can be marked
+ * __initdata.
+ */
+void __init s3c_ohci_set_platdata(struct s3c2410_hcd_info *info)
+{
+	struct s3c2410_hcd_info *npd;
+
+	npd = kmemdup(info, sizeof(struct s3c2410_hcd_info), GFP_KERNEL);
+	if (!npd)
+		printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+
+	s3c_device_ohci.dev.platform_data = npd;
+}
diff --git a/arch/arm/plat-s3c/dma.c b/arch/arm/plat-samsung/dma.c
index a995850cd9d5..cb459dd95459 100644
--- a/arch/arm/plat-s3c/dma.c
+++ b/arch/arm/plat-samsung/dma.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c/dma.c
+/* linux/arch/arm/plat-samsung/dma.c
  *
  * Copyright (c) 2003-2009 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -20,8 +20,6 @@ struct s3c2410_dma_buf;
 #include <mach/dma.h>
 #include <mach/irqs.h>
 
-#include <plat/dma-plat.h>
-
 /* dma channel state information */
 struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS];
 struct s3c2410_dma_chan *s3c_dma_chan_map[DMACH_MAX];
diff --git a/arch/arm/plat-s3c/gpio-config.c b/arch/arm/plat-samsung/gpio-config.c
index 456969b6fa0d..44a84e896546 100644
--- a/arch/arm/plat-s3c/gpio-config.c
+++ b/arch/arm/plat-samsung/gpio-config.c
@@ -17,7 +17,7 @@
 #include <linux/gpio.h>
 #include <linux/io.h>
 
-#include <mach/gpio-core.h>
+#include <plat/gpio-core.h>
 #include <plat/gpio-cfg.h>
 #include <plat/gpio-cfg-helpers.h>
 
diff --git a/arch/arm/plat-s3c/gpio.c b/arch/arm/plat-samsung/gpio.c
index 5ff24e0f9f89..28d2ab8a08db 100644
--- a/arch/arm/plat-s3c/gpio.c
+++ b/arch/arm/plat-samsung/gpio.c
@@ -16,7 +16,7 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 
-#include <mach/gpio-core.h>
+#include <plat/gpio-core.h>
 
 #ifdef CONFIG_S3C_GPIO_TRACK
 struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END];
diff --git a/arch/arm/plat-samsung/gpiolib.c b/arch/arm/plat-samsung/gpiolib.c
new file mode 100644
index 000000000000..8a8ba8bc1d96
--- /dev/null
+++ b/arch/arm/plat-samsung/gpiolib.c
@@ -0,0 +1,199 @@
+/* arch/arm/plat-samsung/gpiolib.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * SAMSUNG - GPIOlib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <mach/gpio.h>
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+
+#ifndef DEBUG_GPIO
+#define gpio_dbg(x...) do { } while (0)
+#else
+#define gpio_dbg(x...) printk(KERN_DEBUG x)
+#endif
+
+/* The samsung_gpiolib_4bit routines are to control the gpio banks where
+ * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the
+ * following example:
+ *
+ * base + 0x00: Control register, 4 bits per gpio
+ *		gpio n: 4 bits starting at (4*n)
+ *		0000 = input, 0001 = output, others mean special-function
+ * base + 0x04: Data register, 1 bit per gpio
+ *		bit n: data bit n
+ *
+ * Note, since the data register is one bit per gpio and is at base + 0x4
+ * we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of
+ * the output.
+*/
+
+static int samsung_gpiolib_4bit_input(struct gpio_chip *chip,
+				      unsigned int offset)
+{
+	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long con;
+
+	con = __raw_readl(base + GPIOCON_OFF);
+	con &= ~(0xf << con_4bit_shift(offset));
+	__raw_writel(con, base + GPIOCON_OFF);
+
+	gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con);
+
+	return 0;
+}
+
+static int samsung_gpiolib_4bit_output(struct gpio_chip *chip,
+				       unsigned int offset, int value)
+{
+	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long con;
+	unsigned long dat;
+
+	con = __raw_readl(base + GPIOCON_OFF);
+	con &= ~(0xf << con_4bit_shift(offset));
+	con |= 0x1 << con_4bit_shift(offset);
+
+	dat = __raw_readl(base + GPIODAT_OFF);
+
+	if (value)
+		dat |= 1 << offset;
+	else
+		dat &= ~(1 << offset);
+
+	__raw_writel(dat, base + GPIODAT_OFF);
+	__raw_writel(con, base + GPIOCON_OFF);
+	__raw_writel(dat, base + GPIODAT_OFF);
+
+	gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
+
+	return 0;
+}
+
+/* The next set of routines are for the case where the GPIO configuration
+ * registers are 4 bits per GPIO but there is more than one register (the
+ * bank has more than 8 GPIOs.
+ *
+ * This case is the similar to the 4 bit case, but the registers are as
+ * follows:
+ *
+ * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs)
+ *		gpio n: 4 bits starting at (4*n)
+ *		0000 = input, 0001 = output, others mean special-function
+ * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs)
+ *		gpio n: 4 bits starting at (4*n)
+ *		0000 = input, 0001 = output, others mean special-function
+ * base + 0x08: Data register, 1 bit per gpio
+ *		bit n: data bit n
+ *
+ * To allow us to use the s3c_gpiolib_get and s3c_gpiolib_set routines we
+ * store the 'base + 0x4' address so that these routines see the data
+ * register at ourchip->base + 0x04.
+ */
+
+static int samsung_gpiolib_4bit2_input(struct gpio_chip *chip,
+				       unsigned int offset)
+{
+	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+	void __iomem *base = ourchip->base;
+	void __iomem *regcon = base;
+	unsigned long con;
+
+	if (offset > 7)
+		offset -= 8;
+	else
+		regcon -= 4;
+
+	con = __raw_readl(regcon);
+	con &= ~(0xf << con_4bit_shift(offset));
+	__raw_writel(con, regcon);
+
+	gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con);
+
+	return 0;
+}
+
+static int samsung_gpiolib_4bit2_output(struct gpio_chip *chip,
+					unsigned int offset, int value)
+{
+	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+	void __iomem *base = ourchip->base;
+	void __iomem *regcon = base;
+	unsigned long con;
+	unsigned long dat;
+	unsigned con_offset = offset;
+
+	if (con_offset > 7)
+		con_offset -= 8;
+	else
+		regcon -= 4;
+
+	con = __raw_readl(regcon);
+	con &= ~(0xf << con_4bit_shift(con_offset));
+	con |= 0x1 << con_4bit_shift(con_offset);
+
+	dat = __raw_readl(base + GPIODAT_OFF);
+
+	if (value)
+		dat |= 1 << offset;
+	else
+		dat &= ~(1 << offset);
+
+	__raw_writel(dat, base + GPIODAT_OFF);
+	__raw_writel(con, regcon);
+	__raw_writel(dat, base + GPIODAT_OFF);
+
+	gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
+
+	return 0;
+}
+
+void __init samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip)
+{
+	chip->chip.direction_input = samsung_gpiolib_4bit_input;
+	chip->chip.direction_output = samsung_gpiolib_4bit_output;
+	chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
+}
+
+void __init samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip)
+{
+	chip->chip.direction_input = samsung_gpiolib_4bit2_input;
+	chip->chip.direction_output = samsung_gpiolib_4bit2_output;
+	chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
+}
+
+void __init samsung_gpiolib_add_4bit_chips(struct s3c_gpio_chip *chip,
+					   int nr_chips)
+{
+	for (; nr_chips > 0; nr_chips--, chip++) {
+		samsung_gpiolib_add_4bit(chip);
+		s3c_gpiolib_add(chip);
+	}
+}
+
+void __init samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip,
+					    int nr_chips)
+{
+	for (; nr_chips > 0; nr_chips--, chip++) {
+		samsung_gpiolib_add_4bit2(chip);
+		s3c_gpiolib_add(chip);
+	}
+}
diff --git a/arch/arm/plat-s3c/include/plat/adc.h b/arch/arm/plat-samsung/include/plat/adc.h
index 5f3b1cd53b90..e8382c7be10b 100644
--- a/arch/arm/plat-s3c/include/plat/adc.h
+++ b/arch/arm/plat-samsung/include/plat/adc.h
@@ -1,10 +1,10 @@
-/* arch/arm/plat-s3c/include/plat/adc.h
+/* arch/arm/plat-samsung/include/plat/adc.h
  *
  * Copyright (c) 2008 Simtec Electronics
  *	http://armlinux.simnte.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * S3C24XX ADC driver information
+ * S3C ADC driver information
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/plat-s3c/include/plat/audio.h b/arch/arm/plat-samsung/include/plat/audio.h
index f22d23bb6271..e32f9edfd4b7 100644
--- a/arch/arm/plat-s3c/include/plat/audio.h
+++ b/arch/arm/plat-samsung/include/plat/audio.h
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c/include/plat/audio.h
+/* arch/arm/plat-samsung/include/plat/audio.h
  *
  * Copyright (c) 2009 Samsung Electronics Co. Ltd
  * Author: Jaswinder Singh <jassi.brar@samsung.com>
@@ -8,6 +8,14 @@
  * published by the Free Software Foundation.
  */
 
+/* The machine init code calls s3c*_ac97_setup_gpio with
+ * one of these defines in order to select appropriate bank
+ * of GPIO for AC97 pins
+ */
+#define S3C64XX_AC97_GPD  0
+#define S3C64XX_AC97_GPE  1
+extern void s3c64xx_ac97_setup_gpio(int);
+
 /**
  * struct s3c_audio_pdata - common platform data for audio device drivers
  * @cfg_gpio: Callback function to setup mux'ed pins in I2S/PCM/AC97 mode
diff --git a/arch/arm/plat-samsung/include/plat/clock-clksrc.h b/arch/arm/plat-samsung/include/plat/clock-clksrc.h
new file mode 100644
index 000000000000..50a8ca7c3760
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/clock-clksrc.h
@@ -0,0 +1,83 @@
+/* linux/arch/arm/plat-samsung/include/plat/clock-clksrc.h
+ *
+ * Parts taken from arch/arm/plat-s3c64xx/clock.c
+ *	Copyright 2008 Openmoko, Inc.
+ *	Copyright 2008 Simtec Electronics
+ *		Ben Dooks <ben@simtec.co.uk>
+ *		http://armlinux.simtec.co.uk/
+ *
+ * Copyright 2009 Ben Dooks <ben-linux@fluff.org>
+ * Copyright 2009 Harald Welte
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/**
+ * struct clksrc_sources - list of sources for a given clock
+ * @sources: array of pointers to clocks
+ * @nr_sources: The size of @sources
+ */
+struct clksrc_sources {
+	unsigned int	nr_sources;
+	struct clk	**sources;
+};
+
+/**
+ * struct clksrc_reg - register definition for clock control bits
+ * @reg: pointer to the register in virtual memory.
+ * @shift: the shift in bits to where the bitfield is.
+ * @size: the size in bits of the bitfield.
+ *
+ * This specifies the size and position of the bits we are interested
+ * in within the register specified by @reg.
+ */
+struct clksrc_reg {
+	void __iomem		*reg;
+	unsigned short		shift;
+	unsigned short		size;
+};
+
+/**
+ * struct clksrc_clk - class of clock for newer style samsung devices.
+ * @clk: the standard clock representation
+ * @sources: the sources for this clock
+ * @reg_src: the register definition for selecting the clock's source
+ * @reg_div: the register definition for the clock's output divisor
+ *
+ * This clock implements the features required by the newer SoCs where
+ * the standard clock block provides an input mux and a post-mux divisor
+ * to provide the periperhal's clock.
+ *
+ * The array of @sources provides the mapping of mux position to the
+ * clock, and @reg_src shows the code where to modify to change the mux
+ * position. The @reg_div defines how to change the divider settings on
+ * the output.
+ */
+struct clksrc_clk {
+	struct clk		clk;
+	struct clksrc_sources	*sources;
+
+	struct clksrc_reg	reg_src;
+	struct clksrc_reg	reg_div;
+};
+
+/**
+ * s3c_set_clksrc() - setup the clock from the register settings
+ * @clk: The clock to setup.
+ * @announce: true to announce the setting to printk().
+ *
+ * Setup the clock from the current register settings, for when the
+ * kernel boots or if it is resuming from a possibly unknown state.
+ */
+extern void s3c_set_clksrc(struct clksrc_clk *clk, bool announce);
+
+/**
+ * s3c_register_clksrc() register clocks from an array of clksrc clocks
+ * @srcs: The array of clocks to register
+ * @size: The size of the @srcs array.
+ *
+ * Initialise and register the array of clocks described by @srcs.
+ */
+extern void s3c_register_clksrc(struct clksrc_clk *srcs, int size);
diff --git a/arch/arm/plat-s3c/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h
index d86af84b5b8c..60b62692ac7a 100644
--- a/arch/arm/plat-s3c/include/plat/clock.h
+++ b/arch/arm/plat-samsung/include/plat/clock.h
@@ -11,6 +11,30 @@
 
 #include <linux/spinlock.h>
 
+struct clk;
+
+/**
+ * struct clk_ops - standard clock operations
+ * @set_rate: set the clock rate, see clk_set_rate().
+ * @get_rate: get the clock rate, see clk_get_rate().
+ * @round_rate: round a given clock rate, see clk_round_rate().
+ * @set_parent: set the clock's parent, see clk_set_parent().
+ *
+ * Group the common clock implementations together so that we
+ * don't have to keep setting the same fiels again. We leave
+ * enable in struct clk.
+ *
+ * Adding an extra layer of indirection into the process should
+ * not be a problem as it is unlikely these operations are going
+ * to need to be called quickly.
+ */
+struct clk_ops {
+	int		    (*set_rate)(struct clk *c, unsigned long rate);
+	unsigned long	    (*get_rate)(struct clk *c);
+	unsigned long	    (*round_rate)(struct clk *c, unsigned long rate);
+	int		    (*set_parent)(struct clk *c, struct clk *parent);
+};
+
 struct clk {
 	struct list_head      list;
 	struct module        *owner;
@@ -21,11 +45,8 @@ struct clk {
 	unsigned long         rate;
 	unsigned long         ctrlbit;
 
+	struct clk_ops		*ops;
 	int		    (*enable)(struct clk *, int enable);
-	int		    (*set_rate)(struct clk *c, unsigned long rate);
-	unsigned long	    (*get_rate)(struct clk *c);
-	unsigned long	    (*round_rate)(struct clk *c, unsigned long rate);
-	int		    (*set_parent)(struct clk *c, struct clk *parent);
 };
 
 /* other clocks which may be registered by board support */
@@ -54,6 +75,9 @@ extern struct clk clk_h2;
 extern struct clk clk_27m;
 extern struct clk clk_48m;
 
+extern int clk_default_setrate(struct clk *clk, unsigned long rate);
+extern struct clk_ops clk_ops_def_setrate;
+
 /* exports for arch/arm/mach-s3c2410
  *
  * Please DO NOT use these outside of arch/arm/mach-s3c2410
@@ -66,9 +90,11 @@ extern int s3c2410_clkcon_enable(struct clk *clk, int enable);
 extern int s3c24xx_register_clock(struct clk *clk);
 extern int s3c24xx_register_clocks(struct clk **clk, int nr_clks);
 
+extern void s3c_register_clocks(struct clk *clk, int nr_clks);
+
 extern int s3c24xx_register_baseclocks(unsigned long xtal);
 
-extern void s3c64xx_register_clocks(void);
+extern void s5p_register_clocks(unsigned long xtal_freq);
 
 extern void s3c24xx_setup_clocks(unsigned long fclk,
 				 unsigned long hclk,
diff --git a/arch/arm/plat-s3c/include/plat/cpu-freq.h b/arch/arm/plat-samsung/include/plat/cpu-freq.h
index 94eb06a2ea5c..80c4a809c721 100644
--- a/arch/arm/plat-s3c/include/plat/cpu-freq.h
+++ b/arch/arm/plat-samsung/include/plat/cpu-freq.h
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c/include/plat/cpu-freq.h
+/* arch/arm/plat-samsung/include/plat/cpu-freq.h
  *
  * Copyright (c) 2006-2007 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
diff --git a/arch/arm/plat-s3c/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index d1131ca11e97..d316b4a579f4 100644
--- a/arch/arm/plat-s3c/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c/include/plat/cpu.h
+/* linux/arch/arm/plat-samsung/include/plat/cpu.h
  *
  * Copyright (c) 2004-2005 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -48,9 +48,12 @@ extern void s3c_init_cpu(unsigned long idcode,
 
 extern void s3c24xx_init_irq(void);
 extern void s3c64xx_init_irq(u32 vic0, u32 vic1);
+extern void s5p_init_irq(u32 *vic, u32 num_vic);
 
 extern void s3c24xx_init_io(struct map_desc *mach_desc, int size);
 extern void s3c64xx_init_io(struct map_desc *mach_desc, int size);
+extern void s5p_init_io(struct map_desc *mach_desc,
+			int size, void __iomem *cpuid_addr);
 
 extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 
diff --git a/arch/arm/plat-s3c/include/plat/debug-macro.S b/arch/arm/plat-samsung/include/plat/debug-macro.S
index 3634d4e3708b..dc6efd90e8ff 100644
--- a/arch/arm/plat-s3c/include/plat/debug-macro.S
+++ b/arch/arm/plat-samsung/include/plat/debug-macro.S
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/plat-s3c/debug-macro.S
+/* arch/arm/plat-samsung/include/plat/debug-macro.S
  *
  * Copyright 2005, 2007 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
@@ -11,6 +11,18 @@
 
 #include <plat/regs-serial.h>
 
+/* The S5PV210/S5PC110 and S5P6442 implementations are as belows. */
+
+	.macro fifo_level_s5pv210 rd, rx
+		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		and	\rd, \rd, #S5PV210_UFSTAT_TXMASK
+	.endm
+
+	.macro  fifo_full_s5pv210 rd, rx
+		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		tst	\rd, #S5PV210_UFSTAT_TXFULL
+	.endm
+
 /* The S3C2440 implementations are used by default as they are the
  * most widely re-used */
 
diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index c1c20b023917..796d24258313 100644
--- a/arch/arm/plat-s3c/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/plat-s3c24xx/devs.h
+/* arch/arm/plat-samsung/include/plat/devs.h
  *
  * Copyright (c) 2004 Simtec Electronics
  * Ben Dooks <ben@simtec.co.uk>
@@ -18,6 +18,7 @@ struct s3c24xx_uart_resources {
 
 extern struct s3c24xx_uart_resources s3c2410_uart_resources[];
 extern struct s3c24xx_uart_resources s3c64xx_uart_resources[];
+extern struct s3c24xx_uart_resources s5p_uart_resources[];
 
 extern struct platform_device *s3c24xx_uart_devs[];
 extern struct platform_device *s3c24xx_uart_src[];
@@ -28,12 +29,18 @@ extern struct platform_device s3c64xx_device_iis0;
 extern struct platform_device s3c64xx_device_iis1;
 extern struct platform_device s3c64xx_device_iisv4;
 
+extern struct platform_device s3c64xx_device_spi0;
+extern struct platform_device s3c64xx_device_spi1;
+
 extern struct platform_device s3c64xx_device_pcm0;
 extern struct platform_device s3c64xx_device_pcm1;
 
+extern struct platform_device s3c64xx_device_ac97;
+
 extern struct platform_device s3c_device_ts;
+
 extern struct platform_device s3c_device_fb;
-extern struct platform_device s3c_device_usb;
+extern struct platform_device s3c_device_ohci;
 extern struct platform_device s3c_device_lcd;
 extern struct platform_device s3c_device_wdt;
 extern struct platform_device s3c_device_i2c0;
diff --git a/arch/arm/plat-s3c/include/plat/dma-core.h b/arch/arm/plat-samsung/include/plat/dma-core.h
index 32ff2a92cb3c..32ff2a92cb3c 100644
--- a/arch/arm/plat-s3c/include/plat/dma-core.h
+++ b/arch/arm/plat-samsung/include/plat/dma-core.h
diff --git a/arch/arm/plat-s3c24xx/include/plat/dma-plat.h b/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
index 9565ead1bc9b..336d5ac02035 100644
--- a/arch/arm/plat-s3c24xx/include/plat/dma-plat.h
+++ b/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
@@ -1,9 +1,9 @@
-/* linux/arch/arm/plat-s3c24xx/include/plat/dma-plat.h
+/* linux/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
  *
  * Copyright (C) 2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * Samsung S3C24XX DMA support
+ * Samsung S3C24XX DMA support - per SoC functions
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/plat-s3c/include/plat/dma.h b/arch/arm/plat-samsung/include/plat/dma.h
index e429d10be3ad..7584d751ed51 100644
--- a/arch/arm/plat-s3c/include/plat/dma.h
+++ b/arch/arm/plat-samsung/include/plat/dma.h
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c/include/plat/dma.h
+/* arch/arm/plat-samsung/include/plat/dma.h
  *
  * Copyright (C) 2003-2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
diff --git a/arch/arm/plat-s3c/include/plat/fb.h b/arch/arm/plat-samsung/include/plat/fb.h
index f8db87930f8b..ffc01a76b7ce 100644
--- a/arch/arm/plat-s3c/include/plat/fb.h
+++ b/arch/arm/plat-samsung/include/plat/fb.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c/include/plat/fb.h
+/* arch/arm/plat-samsung/include/plat/fb.h
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
index 652e2bbdaa20..dda19da037ad 100644
--- a/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
@@ -78,7 +78,7 @@ extern int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip,
  *	others = Special functions (dependant on bank)
  *
  * Note, since the code to deal with the case where there are two control
- * registers instead of one, we do not have a seperate set of functions for
+ * registers instead of one, we do not have a separate set of functions for
  * each case.
 */
 extern int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
diff --git a/arch/arm/plat-s3c/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
index 29cd6a86cade..29cd6a86cade 100644
--- a/arch/arm/plat-s3c/include/plat/gpio-cfg.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
diff --git a/arch/arm/plat-s3c/include/plat/gpio-core.h b/arch/arm/plat-samsung/include/plat/gpio-core.h
index 32af612767aa..49ff406a7066 100644
--- a/arch/arm/plat-s3c/include/plat/gpio-core.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-core.h
@@ -11,6 +11,11 @@
  * published by the Free Software Foundation.
 */
 
+#define GPIOCON_OFF	(0x00)
+#define GPIODAT_OFF	(0x04)
+
+#define con_4bit_shift(__off) ((__off) * 4)
+
 /* Define the core gpiolib support functions that the s3c platforms may
  * need to extend or change depending on the hardware and the s3c chip
  * selected at build or found at run time.
@@ -80,6 +85,29 @@ extern void s3c_gpiolib_add(struct s3c_gpio_chip *chip);
  * and any other necessary functions.
  */
 
+/**
+ * samsung_gpiolib_add_4bit_chips - 4bit single register GPIO config.
+ * @chip: The gpio chip that is being configured.
+ * @nr_chips: The no of chips (gpio ports) for the GPIO being configured.
+ *
+ * This helper deal with the GPIO cases where the control register has 4 bits
+ * of control per GPIO, generally in the form of:
+ * 0000 = Input
+ * 0001 = Output
+ * others = Special functions (dependant on bank)
+ *
+ * Note, since the code to deal with the case where there are two control
+ * registers instead of one, we do not have a seperate set of function
+ * (samsung_gpiolib_add_4bit2_chips)for each case.
+ */
+extern void samsung_gpiolib_add_4bit_chips(struct s3c_gpio_chip *chip,
+					   int nr_chips);
+extern void samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip,
+					    int nr_chips);
+
+extern void samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip);
+extern void samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip);
+
 #ifdef CONFIG_S3C_GPIO_TRACK
 extern struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END];
 
@@ -90,6 +118,8 @@ static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int chip)
 #else
 /* machine specific code should provide s3c_gpiolib_getchip */
 
+#include <mach/gpio-track.h>
+
 static inline void s3c_gpiolib_track(struct s3c_gpio_chip *chip) { }
 #endif
 
diff --git a/arch/arm/plat-s3c/include/plat/hwmon.h b/arch/arm/plat-samsung/include/plat/hwmon.h
index 1ba88ea0aa31..1ba88ea0aa31 100644
--- a/arch/arm/plat-s3c/include/plat/hwmon.h
+++ b/arch/arm/plat-samsung/include/plat/hwmon.h
diff --git a/arch/arm/plat-s3c/include/plat/iic-core.h b/arch/arm/plat-samsung/include/plat/iic-core.h
index 36397ca20962..36397ca20962 100644
--- a/arch/arm/plat-s3c/include/plat/iic-core.h
+++ b/arch/arm/plat-samsung/include/plat/iic-core.h
diff --git a/arch/arm/plat-s3c/include/plat/iic.h b/arch/arm/plat-samsung/include/plat/iic.h
index 3083df00dee6..3083df00dee6 100644
--- a/arch/arm/plat-s3c/include/plat/iic.h
+++ b/arch/arm/plat-samsung/include/plat/iic.h
diff --git a/arch/arm/plat-samsung/include/plat/irq-uart.h b/arch/arm/plat-samsung/include/plat/irq-uart.h
new file mode 100644
index 000000000000..a9331e49bea3
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/irq-uart.h
@@ -0,0 +1,20 @@
+/* arch/arm/plat-samsung/include/plat/irq-uart.h
+ *
+ * Copyright (c) 2010 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for Samsung SoC UART IRQ demux for S3C64XX and later
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct s3c_uart_irq {
+	void __iomem	*regs;
+	unsigned int	 base_irq;
+	unsigned int	 parent_irq;
+};
+
+extern void s3c_init_uart_irqs(struct s3c_uart_irq *irq, unsigned int nr_irqs);
+
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2442.h b/arch/arm/plat-samsung/include/plat/irq-vic-timer.h
index 451a23a2092a..a90b53431b5b 100644
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2442.h
+++ b/arch/arm/plat-samsung/include/plat/irq-vic-timer.h
@@ -1,17 +1,13 @@
-/* linux/include/asm-arm/plat-s3c24xx/s3c2442.h
+/* arch/arm/plat-samsung/include/plat/irq-vic-timer.h
  *
- * Copyright (c) 2006 Simtec Electronics
+ * Copyright (c) 2010 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * Header file for s3c2442 cpu support
+ * Header file for Samsung SoC IRQ VIC timer
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
 */
 
-#ifdef CONFIG_CPU_S3C2442
-extern  int s3c2442_init(void);
-#else
-#define s3c2442_init NULL
-#endif
+extern void s3c_init_vic_timer_irq(unsigned int vic, unsigned int timer);
diff --git a/arch/arm/plat-s3c/include/plat/map-base.h b/arch/arm/plat-samsung/include/plat/map-base.h
index 250be311c85b..250be311c85b 100644
--- a/arch/arm/plat-s3c/include/plat/map-base.h
+++ b/arch/arm/plat-samsung/include/plat/map-base.h
diff --git a/arch/arm/plat-s3c/include/plat/nand.h b/arch/arm/plat-samsung/include/plat/nand.h
index 226147b7e026..b64115fa93a4 100644
--- a/arch/arm/plat-s3c/include/plat/nand.h
+++ b/arch/arm/plat-samsung/include/plat/nand.h
@@ -3,7 +3,7 @@
  * Copyright (c) 2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * S3C2410 - NAND device controller platfrom_device info
+ * S3C2410 - NAND device controller platform_device info
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/plat-s3c/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h
index 7a797192fcf3..245836d91931 100644
--- a/arch/arm/plat-s3c/include/plat/pm.h
+++ b/arch/arm/plat-samsung/include/plat/pm.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/plat-s3c24xx/pm.h
+/* arch/arm/plat-samsung/include/plat/pm.h
  *
  * Copyright (c) 2004 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
@@ -111,7 +111,7 @@ extern int s3c24xx_irq_resume(struct sys_device *dev);
 
 /* PM debug functions */
 
-#ifdef CONFIG_S3C2410_PM_DEBUG
+#ifdef CONFIG_SAMSUNG_PM_DEBUG
 /**
  * s3c_pm_dbg() - low level debug function for use in suspend/resume.
  * @msg: The message to print.
@@ -141,7 +141,7 @@ static inline void s3c_pm_debug_smdkled(u32 set, u32 clear) { }
 
 /* suspend memory checking */
 
-#ifdef CONFIG_S3C2410_PM_CHECK
+#ifdef CONFIG_SAMSUNG_PM_CHECK
 extern void s3c_pm_check_prepare(void);
 extern void s3c_pm_check_restore(void);
 extern void s3c_pm_check_cleanup(void);
diff --git a/arch/arm/plat-s3c/include/plat/regs-ac97.h b/arch/arm/plat-samsung/include/plat/regs-ac97.h
index c3878f7acb83..c3878f7acb83 100644
--- a/arch/arm/plat-s3c/include/plat/regs-ac97.h
+++ b/arch/arm/plat-samsung/include/plat/regs-ac97.h
diff --git a/arch/arm/plat-s3c/include/plat/regs-adc.h b/arch/arm/plat-samsung/include/plat/regs-adc.h
index 4323cccc86cd..7554c4fcddb9 100644
--- a/arch/arm/plat-s3c/include/plat/regs-adc.h
+++ b/arch/arm/plat-samsung/include/plat/regs-adc.h
@@ -19,9 +19,13 @@
 #define S3C2410_ADCDLY	   S3C2410_ADCREG(0x08)
 #define S3C2410_ADCDAT0	   S3C2410_ADCREG(0x0C)
 #define S3C2410_ADCDAT1	   S3C2410_ADCREG(0x10)
+#define S3C64XX_ADCUPDN		S3C2410_ADCREG(0x14)
+#define S3C64XX_ADCCLRINT	S3C2410_ADCREG(0x18)
+#define S3C64XX_ADCCLRINTPNDNUP	S3C2410_ADCREG(0x20)
 
 
 /* ADCCON Register Bits */
+#define S3C64XX_ADCCON_RESSEL		(1<<16)
 #define S3C2410_ADCCON_ECFLG		(1<<15)
 #define S3C2410_ADCCON_PRSCEN		(1<<14)
 #define S3C2410_ADCCON_PRSCVL(x)	(((x)&0xFF)<<6)
diff --git a/arch/arm/plat-s3c/include/plat/regs-fb-v4.h b/arch/arm/plat-samsung/include/plat/regs-fb-v4.h
index a60ed0d06c94..0f43599248ad 100644
--- a/arch/arm/plat-s3c/include/plat/regs-fb-v4.h
+++ b/arch/arm/plat-samsung/include/plat/regs-fb-v4.h
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c/include/plat/regs-fb-v4.h
+/* arch/arm/plat-samsung/include/plat/regs-fb-v4.h
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c/include/plat/regs-fb.h b/arch/arm/plat-samsung/include/plat/regs-fb.h
index e9ee599d430e..0ef806e50344 100644
--- a/arch/arm/plat-s3c/include/plat/regs-fb.h
+++ b/arch/arm/plat-samsung/include/plat/regs-fb.h
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c/include/plat/regs-fb.h
+/* arch/arm/plat-samsung/include/plat/regs-fb.h
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c/include/plat/regs-iic.h b/arch/arm/plat-samsung/include/plat/regs-iic.h
index 2f7c17de8ac8..2f7c17de8ac8 100644
--- a/arch/arm/plat-s3c/include/plat/regs-iic.h
+++ b/arch/arm/plat-samsung/include/plat/regs-iic.h
diff --git a/arch/arm/plat-s3c/include/plat/regs-irqtype.h b/arch/arm/plat-samsung/include/plat/regs-irqtype.h
index c63cd3fc5ad3..c63cd3fc5ad3 100644
--- a/arch/arm/plat-s3c/include/plat/regs-irqtype.h
+++ b/arch/arm/plat-samsung/include/plat/regs-irqtype.h
diff --git a/arch/arm/plat-s3c/include/plat/regs-nand.h b/arch/arm/plat-samsung/include/plat/regs-nand.h
index 238efea7b9e4..238efea7b9e4 100644
--- a/arch/arm/plat-s3c/include/plat/regs-nand.h
+++ b/arch/arm/plat-samsung/include/plat/regs-nand.h
diff --git a/arch/arm/plat-s3c/include/plat/regs-rtc.h b/arch/arm/plat-samsung/include/plat/regs-rtc.h
index d5837cf8e402..d5837cf8e402 100644
--- a/arch/arm/plat-s3c/include/plat/regs-rtc.h
+++ b/arch/arm/plat-samsung/include/plat/regs-rtc.h
diff --git a/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h b/arch/arm/plat-samsung/include/plat/regs-s3c2412-iis.h
index abf2fbc2eb2f..abf2fbc2eb2f 100644
--- a/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h
+++ b/arch/arm/plat-samsung/include/plat/regs-s3c2412-iis.h
diff --git a/arch/arm/plat-s3c/include/plat/regs-sdhci.h b/arch/arm/plat-samsung/include/plat/regs-sdhci.h
index e34049ad44cc..e34049ad44cc 100644
--- a/arch/arm/plat-s3c/include/plat/regs-sdhci.h
+++ b/arch/arm/plat-samsung/include/plat/regs-sdhci.h
diff --git a/arch/arm/plat-s3c/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h
index 85d8904e7f24..a6eba8496b24 100644
--- a/arch/arm/plat-s3c/include/plat/regs-serial.h
+++ b/arch/arm/plat-samsung/include/plat/regs-serial.h
@@ -1,4 +1,4 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-serial.h
+/* arch/arm/plat-samsung/include/plat/regs-serial.h
  *
  *  From linux/include/asm-arm/hardware/serial_s3c2410.h
  *
@@ -194,6 +194,36 @@
 #define S3C64XX_UINTSP		0x34
 #define S3C64XX_UINTM		0x38
 
+/* Following are specific to S5PV210 and S5P6442 */
+#define S5PV210_UCON_CLKMASK	(1<<10)
+#define S5PV210_UCON_PCLK	(0<<10)
+#define S5PV210_UCON_UCLK	(1<<10)
+
+#define S5PV210_UFCON_TXTRIG0	(0<<8)
+#define S5PV210_UFCON_TXTRIG4	(1<<8)
+#define S5PV210_UFCON_TXTRIG8	(2<<8)
+#define S5PV210_UFCON_TXTRIG16	(3<<8)
+#define S5PV210_UFCON_TXTRIG32	(4<<8)
+#define S5PV210_UFCON_TXTRIG64	(5<<8)
+#define S5PV210_UFCON_TXTRIG128 (6<<8)
+#define S5PV210_UFCON_TXTRIG256 (7<<8)
+
+#define S5PV210_UFCON_RXTRIG1	(0<<4)
+#define S5PV210_UFCON_RXTRIG4	(1<<4)
+#define S5PV210_UFCON_RXTRIG8	(2<<4)
+#define S5PV210_UFCON_RXTRIG16	(3<<4)
+#define S5PV210_UFCON_RXTRIG32	(4<<4)
+#define S5PV210_UFCON_RXTRIG64	(5<<4)
+#define S5PV210_UFCON_RXTRIG128	(6<<4)
+#define S5PV210_UFCON_RXTRIG256	(7<<4)
+
+#define S5PV210_UFSTAT_TXFULL	(1<<24)
+#define S5PV210_UFSTAT_RXFULL	(1<<8)
+#define S5PV210_UFSTAT_TXMASK	(255<<16)
+#define S5PV210_UFSTAT_TXSHIFT	(16)
+#define S5PV210_UFSTAT_RXMASK	(255<<0)
+#define S5PV210_UFSTAT_RXSHIFT	(0)
+
 #ifndef __ASSEMBLY__
 
 /* struct s3c24xx_uart_clksrc
diff --git a/arch/arm/plat-s3c/include/plat/regs-timer.h b/arch/arm/plat-samsung/include/plat/regs-timer.h
index d097d92f8cc7..d097d92f8cc7 100644
--- a/arch/arm/plat-s3c/include/plat/regs-timer.h
+++ b/arch/arm/plat-samsung/include/plat/regs-timer.h
diff --git a/arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h b/arch/arm/plat-samsung/include/plat/regs-usb-hsotg-phy.h
index 36a85f5000c8..a111ad871833 100644
--- a/arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h
+++ b/arch/arm/plat-samsung/include/plat/regs-usb-hsotg-phy.h
@@ -12,7 +12,7 @@
  * published by the Free Software Foundation.
 */
 
-/* Note, this is a seperate header file as some of the clock framework
+/* Note, this is a separate header file as some of the clock framework
  * needs to touch this if the clk_48m is used as the USB OHCI or other
  * peripheral source.
 */
diff --git a/arch/arm/plat-s3c/include/plat/regs-usb-hsotg.h b/arch/arm/plat-samsung/include/plat/regs-usb-hsotg.h
index 8d18d9d4d148..8d18d9d4d148 100644
--- a/arch/arm/plat-s3c/include/plat/regs-usb-hsotg.h
+++ b/arch/arm/plat-samsung/include/plat/regs-usb-hsotg.h
diff --git a/arch/arm/plat-s3c/include/plat/regs-watchdog.h b/arch/arm/plat-samsung/include/plat/regs-watchdog.h
index 4938492470f7..4938492470f7 100644
--- a/arch/arm/plat-s3c/include/plat/regs-watchdog.h
+++ b/arch/arm/plat-samsung/include/plat/regs-watchdog.h
diff --git a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
new file mode 100644
index 000000000000..d17724149315
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
@@ -0,0 +1,67 @@
+/* linux/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
+ *
+ * Copyright (C) 2009 Samsung Electronics Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __S3C64XX_PLAT_SPI_H
+#define __S3C64XX_PLAT_SPI_H
+
+/**
+ * struct s3c64xx_spi_csinfo - ChipSelect description
+ * @fb_delay: Slave specific feedback delay.
+ *            Refer to FB_CLK_SEL register definition in SPI chapter.
+ * @line: Custom 'identity' of the CS line.
+ * @set_level: CS line control.
+ *
+ * This is per SPI-Slave Chipselect information.
+ * Allocate and initialize one in machine init code and make the
+ * spi_board_info.controller_data point to it.
+ */
+struct s3c64xx_spi_csinfo {
+	u8 fb_delay;
+	unsigned line;
+	void (*set_level)(unsigned line_id, int lvl);
+};
+
+/**
+ * struct s3c64xx_spi_info - SPI Controller defining structure
+ * @src_clk_nr: Clock source index for the CLK_CFG[SPI_CLKSEL] field.
+ * @src_clk_name: Platform name of the corresponding clock.
+ * @num_cs: Number of CS this controller emulates.
+ * @cfg_gpio: Configure pins for this SPI controller.
+ * @fifo_lvl_mask: All tx fifo_lvl fields start at offset-6
+ * @rx_lvl_offset: Depends on tx fifo_lvl field and bus number
+ * @high_speed: If the controller supports HIGH_SPEED_EN bit
+ */
+struct s3c64xx_spi_info {
+	int src_clk_nr;
+	char *src_clk_name;
+
+	int num_cs;
+
+	int (*cfg_gpio)(struct platform_device *pdev);
+
+	/* Following two fields are for future compatibility */
+	int fifo_lvl_mask;
+	int rx_lvl_offset;
+	int high_speed;
+};
+
+/**
+ * s3c64xx_spi_set_info - SPI Controller configure callback by the board
+ *				initialization code.
+ * @cntrlr: SPI controller number the configuration is for.
+ * @src_clk_nr: Clock the SPI controller is to use to generate SPI clocks.
+ * @num_cs: Number of elements in the 'cs' array.
+ *
+ * Call this from machine init code for each SPI Controller that
+ * has some chips attached to it.
+ */
+extern void s3c64xx_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
+
+#endif /* __S3C64XX_PLAT_SPI_H */
diff --git a/arch/arm/plat-s3c/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h
index 53198673b6bd..7d07cd7aa4f2 100644
--- a/arch/arm/plat-s3c/include/plat/sdhci.h
+++ b/arch/arm/plat-samsung/include/plat/sdhci.h
@@ -78,8 +78,8 @@ extern void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
 
 /* S3C6400 SDHCI setup */
 
-#ifdef CONFIG_S3C6400_SETUP_SDHCI
-extern char *s3c6400_hsmmc_clksrcs[4];
+#ifdef CONFIG_S3C64XX_SETUP_SDHCI
+extern char *s3c64xx_hsmmc_clksrcs[4];
 
 #ifdef CONFIG_S3C_DEV_HSMMC
 extern void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
@@ -89,7 +89,7 @@ extern void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
 
 static inline void s3c6400_default_sdhci0(void)
 {
-	s3c_hsmmc0_def_platdata.clocks = s3c6400_hsmmc_clksrcs;
+	s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
 	s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
 	s3c_hsmmc0_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
 }
@@ -101,7 +101,7 @@ static inline void s3c6400_default_sdhci0(void) { }
 #ifdef CONFIG_S3C_DEV_HSMMC1
 static inline void s3c6400_default_sdhci1(void)
 {
-	s3c_hsmmc1_def_platdata.clocks = s3c6400_hsmmc_clksrcs;
+	s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
 	s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
 	s3c_hsmmc1_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
 }
@@ -112,7 +112,7 @@ static inline void s3c6400_default_sdhci1(void) { }
 #ifdef CONFIG_S3C_DEV_HSMMC2
 static inline void s3c6400_default_sdhci2(void)
 {
-	s3c_hsmmc2_def_platdata.clocks = s3c6400_hsmmc_clksrcs;
+	s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
 	s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
 	s3c_hsmmc2_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
 }
@@ -120,27 +120,19 @@ static inline void s3c6400_default_sdhci2(void)
 static inline void s3c6400_default_sdhci2(void) { }
 #endif /* CONFIG_S3C_DEV_HSMMC2 */
 
-#else
-static inline void s3c6400_default_sdhci0(void) { }
-static inline void s3c6400_default_sdhci1(void) { }
-#endif /* CONFIG_S3C6400_SETUP_SDHCI */
-
 /* S3C6410 SDHCI setup */
 
-#ifdef CONFIG_S3C6410_SETUP_SDHCI
-extern char *s3c6410_hsmmc_clksrcs[4];
-
-extern void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
-					   void __iomem *r,
-					   struct mmc_ios *ios,
-					   struct mmc_card *card);
+extern void s3c6410_setup_sdhci_cfg_card(struct platform_device *dev,
+					 void __iomem *r,
+					 struct mmc_ios *ios,
+					 struct mmc_card *card);
 
 #ifdef CONFIG_S3C_DEV_HSMMC
 static inline void s3c6410_default_sdhci0(void)
 {
-	s3c_hsmmc0_def_platdata.clocks = s3c6410_hsmmc_clksrcs;
+	s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
 	s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
-	s3c_hsmmc0_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card;
+	s3c_hsmmc0_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card;
 }
 #else
 static inline void s3c6410_default_sdhci0(void) { }
@@ -149,9 +141,9 @@ static inline void s3c6410_default_sdhci0(void) { }
 #ifdef CONFIG_S3C_DEV_HSMMC1
 static inline void s3c6410_default_sdhci1(void)
 {
-	s3c_hsmmc1_def_platdata.clocks = s3c6410_hsmmc_clksrcs;
+	s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
 	s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
-	s3c_hsmmc1_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card;
+	s3c_hsmmc1_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card;
 }
 #else
 static inline void s3c6410_default_sdhci1(void) { }
@@ -160,9 +152,9 @@ static inline void s3c6410_default_sdhci1(void) { }
 #ifdef CONFIG_S3C_DEV_HSMMC2
 static inline void s3c6410_default_sdhci2(void)
 {
-	s3c_hsmmc2_def_platdata.clocks = s3c6410_hsmmc_clksrcs;
+	s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
 	s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
-	s3c_hsmmc2_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card;
+	s3c_hsmmc2_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card;
 }
 #else
 static inline void s3c6410_default_sdhci2(void) { }
@@ -171,7 +163,10 @@ static inline void s3c6410_default_sdhci2(void) { }
 #else
 static inline void s3c6410_default_sdhci0(void) { }
 static inline void s3c6410_default_sdhci1(void) { }
-#endif /* CONFIG_S3C6410_SETUP_SDHCI */
+static inline void s3c6400_default_sdhci0(void) { }
+static inline void s3c6400_default_sdhci1(void) { }
+
+#endif /* CONFIG_S3C64XX_SETUP_SDHCI */
 
 /* S5PC100 SDHCI setup */
 
diff --git a/arch/arm/plat-s3c/include/plat/udc-hs.h b/arch/arm/plat-samsung/include/plat/udc-hs.h
index dd04db043109..a22a4f2eea94 100644
--- a/arch/arm/plat-s3c/include/plat/udc-hs.h
+++ b/arch/arm/plat-samsung/include/plat/udc-hs.h
@@ -12,7 +12,7 @@
  * published by the Free Software Foundation.
 */
 
-enum s3c_hostg_dmamode {
+enum s3c_hsotg_dmamode {
 	S3C_HSOTG_DMA_NONE,	/* do not use DMA at-all */
 	S3C_HSOTG_DMA_ONLY,	/* always use DMA */
 	S3C_HSOTG_DMA_DRV,	/* DMA is chosen by driver */
@@ -24,6 +24,6 @@ enum s3c_hostg_dmamode {
  * @is_osc: The clock source is an oscillator, not a crystal
  */
 struct s3c_hsotg_plat {
-	enum s3c_hostg_dmamode	dma;
+	enum s3c_hsotg_dmamode	dma;
 	unsigned int		is_osc : 1;
 };
diff --git a/arch/arm/plat-s3c/include/plat/uncompress.h b/arch/arm/plat-samsung/include/plat/uncompress.h
index dc66a477f62e..7d6ed7263d57 100644
--- a/arch/arm/plat-s3c/include/plat/uncompress.h
+++ b/arch/arm/plat-samsung/include/plat/uncompress.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/plat-s3c/uncompress.h
+/* arch/arm/plat-samsung/include/plat/uncompress.h
  *
  * Copyright 2003, 2007 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
@@ -140,8 +140,6 @@ static void arch_decomp_error(const char *x)
 #define arch_error arch_decomp_error
 #endif
 
-static void error(char *err);
-
 #ifdef CONFIG_S3C_BOOT_UART_FORCE_FIFO
 static inline void arch_enable_uart_fifo(void)
 {
diff --git a/arch/arm/plat-s3c/include/plat/usb-control.h b/arch/arm/plat-samsung/include/plat/usb-control.h
index 822c87fe948e..7fa1fbefc3f2 100644
--- a/arch/arm/plat-s3c/include/plat/usb-control.h
+++ b/arch/arm/plat-samsung/include/plat/usb-control.h
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c/include/plat/usb-control.h
+/* arch/arm/plat-samsung/include/plat/usb-control.h
  *
  * Copyright (c) 2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -38,4 +38,6 @@ static void inline s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int port
 	}
 }
 
+extern void s3c_ohci_set_platdata(struct s3c2410_hcd_info *info);
+
 #endif /*__ASM_ARCH_USBCONTROL_H */
diff --git a/arch/arm/plat-s3c/include/plat/watchdog-reset.h b/arch/arm/plat-samsung/include/plat/watchdog-reset.h
index 54b762acb5a0..54b762acb5a0 100644
--- a/arch/arm/plat-s3c/include/plat/watchdog-reset.h
+++ b/arch/arm/plat-samsung/include/plat/watchdog-reset.h
diff --git a/arch/arm/plat-s3c/init.c b/arch/arm/plat-samsung/init.c
index 6790edfaca6f..6790edfaca6f 100644
--- a/arch/arm/plat-s3c/init.c
+++ b/arch/arm/plat-samsung/init.c
diff --git a/arch/arm/plat-samsung/irq-uart.c b/arch/arm/plat-samsung/irq-uart.c
new file mode 100644
index 000000000000..4f8c102674ae
--- /dev/null
+++ b/arch/arm/plat-samsung/irq-uart.c
@@ -0,0 +1,143 @@
+/* arch/arm/plat-samsung/irq-uart.c
+ *	originally part of arch/arm/plat-s3c64xx/irq.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * Samsung- UART Interrupt handling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/serial_core.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+#include <plat/irq-uart.h>
+#include <plat/regs-serial.h>
+#include <plat/cpu.h>
+
+/* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3]
+ * are consecutive when looking up the interrupt in the demux routines.
+ */
+
+static inline void __iomem *s3c_irq_uart_base(unsigned int irq)
+{
+	struct s3c_uart_irq *uirq = get_irq_chip_data(irq);
+	return uirq->regs;
+}
+
+static inline unsigned int s3c_irq_uart_bit(unsigned int irq)
+{
+	return irq & 3;
+}
+
+static void s3c_irq_uart_mask(unsigned int irq)
+{
+	void __iomem *regs = s3c_irq_uart_base(irq);
+	unsigned int bit = s3c_irq_uart_bit(irq);
+	u32 reg;
+
+	reg = __raw_readl(regs + S3C64XX_UINTM);
+	reg |= (1 << bit);
+	__raw_writel(reg, regs + S3C64XX_UINTM);
+}
+
+static void s3c_irq_uart_maskack(unsigned int irq)
+{
+	void __iomem *regs = s3c_irq_uart_base(irq);
+	unsigned int bit = s3c_irq_uart_bit(irq);
+	u32 reg;
+
+	reg = __raw_readl(regs + S3C64XX_UINTM);
+	reg |= (1 << bit);
+	__raw_writel(reg, regs + S3C64XX_UINTM);
+	__raw_writel(1 << bit, regs + S3C64XX_UINTP);
+}
+
+static void s3c_irq_uart_unmask(unsigned int irq)
+{
+	void __iomem *regs = s3c_irq_uart_base(irq);
+	unsigned int bit = s3c_irq_uart_bit(irq);
+	u32 reg;
+
+	reg = __raw_readl(regs + S3C64XX_UINTM);
+	reg &= ~(1 << bit);
+	__raw_writel(reg, regs + S3C64XX_UINTM);
+}
+
+static void s3c_irq_uart_ack(unsigned int irq)
+{
+	void __iomem *regs = s3c_irq_uart_base(irq);
+	unsigned int bit = s3c_irq_uart_bit(irq);
+
+	__raw_writel(1 << bit, regs + S3C64XX_UINTP);
+}
+
+static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc)
+{
+	struct s3c_uart_irq *uirq = desc->handler_data;
+	u32 pend = __raw_readl(uirq->regs + S3C64XX_UINTP);
+	int base = uirq->base_irq;
+
+	if (pend & (1 << 0))
+		generic_handle_irq(base);
+	if (pend & (1 << 1))
+		generic_handle_irq(base + 1);
+	if (pend & (1 << 2))
+		generic_handle_irq(base + 2);
+	if (pend & (1 << 3))
+		generic_handle_irq(base + 3);
+}
+
+static struct irq_chip s3c_irq_uart = {
+	.name		= "s3c-uart",
+	.mask		= s3c_irq_uart_mask,
+	.unmask		= s3c_irq_uart_unmask,
+	.mask_ack	= s3c_irq_uart_maskack,
+	.ack		= s3c_irq_uart_ack,
+};
+
+static void __init s3c_init_uart_irq(struct s3c_uart_irq *uirq)
+{
+	struct irq_desc *desc = irq_to_desc(uirq->parent_irq);
+	void __iomem *reg_base = uirq->regs;
+	unsigned int irq;
+	int offs;
+
+	/* mask all interrupts at the start. */
+	__raw_writel(0xf, reg_base + S3C64XX_UINTM);
+
+	for (offs = 0; offs < 3; offs++) {
+		irq = uirq->base_irq + offs;
+
+		set_irq_chip(irq, &s3c_irq_uart);
+		set_irq_chip_data(irq, uirq);
+		set_irq_handler(irq, handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+
+	desc->handler_data = uirq;
+	set_irq_chained_handler(uirq->parent_irq, s3c_irq_demux_uart);
+}
+
+/**
+ * s3c_init_uart_irqs() - initialise UART IRQs and the necessary demuxing
+ * @irq: The interrupt data for registering
+ * @nr_irqs: The number of interrupt descriptions in @irq.
+ *
+ * Register the UART interrupts specified by @irq including the demuxing
+ * routines. This supports the S3C6400 and newer style of devices.
+ */
+void __init s3c_init_uart_irqs(struct s3c_uart_irq *irq, unsigned int nr_irqs)
+{
+	for (; nr_irqs > 0; nr_irqs--, irq++)
+		s3c_init_uart_irq(irq);
+}
diff --git a/arch/arm/plat-samsung/irq-vic-timer.c b/arch/arm/plat-samsung/irq-vic-timer.c
new file mode 100644
index 000000000000..0270519fcabc
--- /dev/null
+++ b/arch/arm/plat-samsung/irq-vic-timer.c
@@ -0,0 +1,86 @@
+/* arch/arm/plat-samsung/irq-vic-timer.c
+ *	originally part of arch/arm/plat-s3c64xx/irq.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - Interrupt handling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+#include <plat/irq-vic-timer.h>
+#include <plat/regs-timer.h>
+
+static void s3c_irq_demux_vic_timer(unsigned int irq, struct irq_desc *desc)
+{
+	generic_handle_irq((int)desc->handler_data);
+}
+
+/* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */
+
+static void s3c_irq_timer_mask(unsigned int irq)
+{
+	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
+
+	reg &= 0x1f;  /* mask out pending interrupts */
+	reg &= ~(1 << (irq - IRQ_TIMER0));
+	__raw_writel(reg, S3C64XX_TINT_CSTAT);
+}
+
+static void s3c_irq_timer_unmask(unsigned int irq)
+{
+	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
+
+	reg &= 0x1f;  /* mask out pending interrupts */
+	reg |= 1 << (irq - IRQ_TIMER0);
+	__raw_writel(reg, S3C64XX_TINT_CSTAT);
+}
+
+static void s3c_irq_timer_ack(unsigned int irq)
+{
+	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
+
+	reg &= 0x1f;
+	reg |= (1 << 5) << (irq - IRQ_TIMER0);
+	__raw_writel(reg, S3C64XX_TINT_CSTAT);
+}
+
+static struct irq_chip s3c_irq_timer = {
+	.name		= "s3c-timer",
+	.mask		= s3c_irq_timer_mask,
+	.unmask		= s3c_irq_timer_unmask,
+	.ack		= s3c_irq_timer_ack,
+};
+
+/**
+ * s3c_init_vic_timer_irq() - initialise timer irq chanined off VIC.\
+ * @parent_irq: The parent IRQ on the VIC for the timer.
+ * @timer_irq: The IRQ to be used for the timer.
+ *
+ * Register the necessary IRQ chaining and support for the timer IRQs
+ * chained of the VIC.
+ */
+void __init s3c_init_vic_timer_irq(unsigned int parent_irq,
+				   unsigned int timer_irq)
+{
+	struct irq_desc *desc = irq_to_desc(parent_irq);
+
+	set_irq_chained_handler(parent_irq, s3c_irq_demux_vic_timer);
+
+	set_irq_chip(timer_irq, &s3c_irq_timer);
+	set_irq_handler(timer_irq, handle_level_irq);
+	set_irq_flags(timer_irq, IRQF_VALID);
+
+	desc->handler_data = (void *)timer_irq;
+}
diff --git a/arch/arm/plat-s3c/pm-check.c b/arch/arm/plat-samsung/pm-check.c
index 8eb1f439861c..0b5bb774192a 100644
--- a/arch/arm/plat-s3c/pm-check.c
+++ b/arch/arm/plat-samsung/pm-check.c
@@ -20,8 +20,8 @@
 
 #include <plat/pm.h>
 
-#if CONFIG_S3C2410_PM_CHECK_CHUNKSIZE < 1
-#error CONFIG_S3C2410_PM_CHECK_CHUNKSIZE must be a positive non-zero value
+#if CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE < 1
+#error CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE must be a positive non-zero value
 #endif
 
 /* suspend checking code...
@@ -29,12 +29,12 @@
  * this next area does a set of crc checks over all the installed
  * memory, so the system can verify if the resume was ok.
  *
- * CONFIG_S3C2410_PM_CHECK_CHUNKSIZE defines the block-size for the CRC,
+ * CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE defines the block-size for the CRC,
  * increasing it will mean that the area corrupted will be less easy to spot,
  * and reducing the size will cause the CRC save area to grow
 */
 
-#define CHECK_CHUNKSIZE (CONFIG_S3C2410_PM_CHECK_CHUNKSIZE * 1024)
+#define CHECK_CHUNKSIZE (CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE * 1024)
 
 static u32 crc_size;	/* size needed for the crc block */
 static u32 *crcs;	/* allocated over suspend/resume */
diff --git a/arch/arm/plat-s3c/pm-gpio.c b/arch/arm/plat-samsung/pm-gpio.c
index cfd326a8b693..69a4c7f02e25 100644
--- a/arch/arm/plat-s3c/pm-gpio.c
+++ b/arch/arm/plat-samsung/pm-gpio.c
@@ -19,7 +19,7 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 
-#include <mach/gpio-core.h>
+#include <plat/gpio-core.h>
 #include <plat/pm.h>
 
 /* PM GPIO helpers */
diff --git a/arch/arm/plat-s3c/pm.c b/arch/arm/plat-samsung/pm.c
index 767470601e5c..27cfca597699 100644
--- a/arch/arm/plat-s3c/pm.c
+++ b/arch/arm/plat-samsung/pm.c
@@ -29,7 +29,7 @@
 #include <asm/irq.h>
 
 #include <plat/pm.h>
-#include <plat/pm-core.h>
+#include <mach/pm-core.h>
 
 /* for external use */
 
@@ -41,7 +41,7 @@ unsigned long s3c_pm_flags;
  * resume before the console layer is available.
 */
 
-#ifdef CONFIG_S3C2410_PM_DEBUG
+#ifdef CONFIG_SAMSUNG_PM_DEBUG
 extern void printascii(const char *);
 
 void s3c_pm_dbg(const char *fmt, ...)
@@ -65,13 +65,13 @@ static inline void s3c_pm_debug_init(void)
 #else
 #define s3c_pm_debug_init() do { } while(0)
 
-#endif /* CONFIG_S3C2410_PM_DEBUG */
+#endif /* CONFIG_SAMSUNG_PM_DEBUG */
 
 /* Save the UART configurations if we are configured for debug. */
 
 unsigned char pm_uart_udivslot;
 
-#ifdef CONFIG_S3C2410_PM_DEBUG
+#ifdef CONFIG_SAMSUNG_PM_DEBUG
 
 struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS];
 
diff --git a/arch/arm/plat-s3c/pwm-clock.c b/arch/arm/plat-samsung/pwm-clock.c
index a318215ab535..46c9381e083b 100644
--- a/arch/arm/plat-s3c/pwm-clock.c
+++ b/arch/arm/plat-samsung/pwm-clock.c
@@ -130,20 +130,22 @@ static int clk_pwm_scaler_set_rate(struct clk *clk, unsigned long rate)
 	return 0;
 }
 
+static struct clk_ops clk_pwm_scaler_ops = {
+	.get_rate	= clk_pwm_scaler_get_rate,
+	.set_rate	= clk_pwm_scaler_set_rate,
+	.round_rate	= clk_pwm_scaler_round_rate,
+};
+
 static struct clk clk_timer_scaler[] = {
 	[0]	= {
 		.name		= "pwm-scaler0",
 		.id		= -1,
-		.get_rate	= clk_pwm_scaler_get_rate,
-		.set_rate	= clk_pwm_scaler_set_rate,
-		.round_rate	= clk_pwm_scaler_round_rate,
+		.ops		= &clk_pwm_scaler_ops,
 	},
 	[1]	= {
 		.name		= "pwm-scaler1",
 		.id		= -1,
-		.get_rate	= clk_pwm_scaler_get_rate,
-		.set_rate	= clk_pwm_scaler_set_rate,
-		.round_rate	= clk_pwm_scaler_round_rate,
+		.ops		= &clk_pwm_scaler_ops,
 	},
 };
 
@@ -256,50 +258,46 @@ static int clk_pwm_tdiv_set_rate(struct clk *clk, unsigned long rate)
 	return 0;
 }
 
+static struct clk_ops clk_tdiv_ops = {
+	.get_rate	= clk_pwm_tdiv_get_rate,
+	.set_rate	= clk_pwm_tdiv_set_rate,
+	.round_rate	= clk_pwm_tdiv_round_rate,
+};
+
 static struct pwm_tdiv_clk clk_timer_tdiv[] = {
 	[0]	= {
 		.clk	= {
-			.name		= "pwm-tdiv",
-			.parent		= &clk_timer_scaler[0],
-			.get_rate	= clk_pwm_tdiv_get_rate,
-			.set_rate	= clk_pwm_tdiv_set_rate,
-			.round_rate	= clk_pwm_tdiv_round_rate,
+			.name	= "pwm-tdiv",
+			.ops	= &clk_tdiv_ops,
+			.parent	= &clk_timer_scaler[0],
 		},
 	},
 	[1]	= {
 		.clk	= {
-			.name		= "pwm-tdiv",
-			.parent		= &clk_timer_scaler[0],
-			.get_rate	= clk_pwm_tdiv_get_rate,
-			.set_rate	= clk_pwm_tdiv_set_rate,
-			.round_rate	= clk_pwm_tdiv_round_rate,
+			.name	= "pwm-tdiv",
+			.ops	= &clk_tdiv_ops,
+			.parent	= &clk_timer_scaler[0],
 		}
 	},
 	[2]	= {
 		.clk	= {
-			.name		= "pwm-tdiv",
-			.parent		= &clk_timer_scaler[1],
-			.get_rate	= clk_pwm_tdiv_get_rate,
-			.set_rate	= clk_pwm_tdiv_set_rate,
-			.round_rate	= clk_pwm_tdiv_round_rate,
+			.name	= "pwm-tdiv",
+			.ops	= &clk_tdiv_ops,
+			.parent	= &clk_timer_scaler[1],
 		},
 	},
 	[3]	= {
 		.clk	= {
-			.name		= "pwm-tdiv",
-			.parent		= &clk_timer_scaler[1],
-			.get_rate	= clk_pwm_tdiv_get_rate,
-			.set_rate	= clk_pwm_tdiv_set_rate,
-			.round_rate	= clk_pwm_tdiv_round_rate,
+			.name	= "pwm-tdiv",
+			.ops	= &clk_tdiv_ops,
+			.parent	= &clk_timer_scaler[1],
 		},
 	},
 	[4]	= {
 		.clk	= {
-			.name		= "pwm-tdiv",
-			.parent		= &clk_timer_scaler[1],
-			.get_rate	= clk_pwm_tdiv_get_rate,
-			.set_rate	= clk_pwm_tdiv_set_rate,
-			.round_rate	= clk_pwm_tdiv_round_rate,
+			.name	= "pwm-tdiv",
+			.ops	= &clk_tdiv_ops,
+			.parent	= &clk_timer_scaler[1],
 		},
 	},
 };
@@ -356,31 +354,35 @@ static int clk_pwm_tin_set_parent(struct clk *clk, struct clk *parent)
 	return 0;
 }
 
+static struct clk_ops clk_tin_ops = {
+	.set_parent	= clk_pwm_tin_set_parent,
+};
+
 static struct clk clk_tin[] = {
 	[0]	= {
-		.name		= "pwm-tin",
-		.id		= 0,
-		.set_parent	= clk_pwm_tin_set_parent,
+		.name	= "pwm-tin",
+		.id	= 0,
+		.ops	= &clk_tin_ops,
 	},
 	[1]	= {
-		.name		= "pwm-tin",
-		.id		= 1,
-		.set_parent	= clk_pwm_tin_set_parent,
+		.name	= "pwm-tin",
+		.id	= 1,
+		.ops	= &clk_tin_ops,
 	},
 	[2]	= {
-		.name		= "pwm-tin",
-		.id		= 2,
-		.set_parent	= clk_pwm_tin_set_parent,
+		.name	= "pwm-tin",
+		.id	= 2,
+		.ops	= &clk_tin_ops,
 	},
 	[3]	= {
-		.name		= "pwm-tin",
-		.id		= 3,
-		.set_parent	= clk_pwm_tin_set_parent,
+		.name	= "pwm-tin",
+		.id	= 3,
+		.ops	= &clk_tin_ops,
 	},
 	[4]	= {
-		.name		= "pwm-tin",
-		.id		= 4,
-		.set_parent	= clk_pwm_tin_set_parent,
+		.name	= "pwm-tin",
+		.id	= 4,
+		.ops	= &clk_tin_ops,
 	},
 };
 
@@ -428,25 +430,15 @@ __init void s3c_pwmclk_init(void)
 		return;
 	}
 
-	for (clk = 0; clk < ARRAY_SIZE(clk_timer_scaler); clk++) {
+	for (clk = 0; clk < ARRAY_SIZE(clk_timer_scaler); clk++)
 		clk_timer_scaler[clk].parent = clk_timers;
-		ret = s3c24xx_register_clock(&clk_timer_scaler[clk]);
-		if (ret < 0) {
-			printk(KERN_ERR "error adding pwm scaler%d clock\n", clk);
-			return;
-		}
-	}
 
-	for (clk = 0; clk < ARRAY_SIZE(clk_timer_tclk); clk++) {
-		ret = s3c24xx_register_clock(&clk_timer_tclk[clk]);
-		if (ret < 0) {
-			printk(KERN_ERR "error adding pww tclk%d\n", clk);
-			return;
-		}
-	}
+	s3c_register_clocks(clk_timer_scaler, ARRAY_SIZE(clk_timer_scaler));
+	s3c_register_clocks(clk_timer_tclk, ARRAY_SIZE(clk_timer_tclk));
 
 	for (clk = 0; clk < ARRAY_SIZE(clk_timer_tdiv); clk++) {
 		ret = clk_pwm_tdiv_register(clk);
+
 		if (ret < 0) {
 			printk(KERN_ERR "error adding pwm%d tdiv clock\n", clk);
 			return;
diff --git a/arch/arm/plat-s3c/pwm.c b/arch/arm/plat-samsung/pwm.c
index ef019f27b67d..f2d11390d01c 100644
--- a/arch/arm/plat-s3c/pwm.c
+++ b/arch/arm/plat-samsung/pwm.c
@@ -379,6 +379,39 @@ static int __devexit s3c_pwm_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_PM
+static int s3c_pwm_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct pwm_device *pwm = platform_get_drvdata(pdev);
+
+	/* No one preserve these values during suspend so reset them
+	 * Otherwise driver leaves PWM unconfigured if same values
+	 * passed to pwm_config
+	 */
+	pwm->period_ns = 0;
+	pwm->duty_ns = 0;
+
+	return 0;
+}
+
+static int s3c_pwm_resume(struct platform_device *pdev)
+{
+	struct pwm_device *pwm = platform_get_drvdata(pdev);
+	unsigned long tcon;
+
+	/* Restore invertion */
+	tcon = __raw_readl(S3C2410_TCON);
+	tcon |= pwm_tcon_invert(pwm);
+	__raw_writel(tcon, S3C2410_TCON);
+
+	return 0;
+}
+
+#else
+#define s3c_pwm_suspend NULL
+#define s3c_pwm_resume NULL
+#endif
+
 static struct platform_driver s3c_pwm_driver = {
 	.driver		= {
 		.name	= "s3c24xx-pwm",
@@ -386,6 +419,8 @@ static struct platform_driver s3c_pwm_driver = {
 	},
 	.probe		= s3c_pwm_probe,
 	.remove		= __devexit_p(s3c_pwm_remove),
+	.suspend	= s3c_pwm_suspend,
+	.resume		= s3c_pwm_resume,
 };
 
 static int __init pwm_init(void)
diff --git a/arch/arm/plat-s3c/time.c b/arch/arm/plat-samsung/time.c
index 3b27b29da478..2231d80ad817 100644
--- a/arch/arm/plat-s3c/time.c
+++ b/arch/arm/plat-samsung/time.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c24xx/time.c
+/* linux/arch/arm/plat-samsung/time.c
  *
  * Copyright (C) 2003-2005 Simtec Electronics
  *	Ben Dooks, <ben@simtec.co.uk>
diff --git a/arch/avr32/include/asm/ptrace.h b/arch/avr32/include/asm/ptrace.h
index 9e2d44f4e0fe..e53dd0d900f5 100644
--- a/arch/avr32/include/asm/ptrace.h
+++ b/arch/avr32/include/asm/ptrace.h
@@ -124,6 +124,8 @@ struct pt_regs {
 
 #include <asm/ocd.h>
 
+#define arch_has_single_step()		(1)
+
 #define arch_ptrace_attach(child)       ocd_enable(child)
 
 #define user_mode(regs)                 (((regs)->sr & MODE_MASK) == MODE_USER)
diff --git a/arch/avr32/kernel/ptrace.c b/arch/avr32/kernel/ptrace.c
index 1fed38fcf594..dd5b882aab40 100644
--- a/arch/avr32/kernel/ptrace.c
+++ b/arch/avr32/kernel/ptrace.c
@@ -28,9 +28,9 @@ static struct pt_regs *get_user_regs(struct task_struct *tsk)
 				  THREAD_SIZE - sizeof(struct pt_regs));
 }
 
-static void ptrace_single_step(struct task_struct *tsk)
+static void user_enable_single_step(struct task_struct *tsk)
 {
-	pr_debug("ptrace_single_step: pid=%u, PC=0x%08lx, SR=0x%08lx\n",
+	pr_debug("user_enable_single_step: pid=%u, PC=0x%08lx, SR=0x%08lx\n",
 		 tsk->pid, task_pt_regs(tsk)->pc, task_pt_regs(tsk)->sr);
 
 	/*
@@ -49,6 +49,11 @@ static void ptrace_single_step(struct task_struct *tsk)
 	set_tsk_thread_flag(tsk, TIF_SINGLE_STEP);
 }
 
+void user_disable_single_step(struct task_struct *child)
+{
+	/* XXX(hch): a no-op here seems wrong.. */
+}
+
 /*
  * Called by kernel/ptrace.c when detaching
  *
@@ -167,50 +172,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		ret = ptrace_write_user(child, addr, data);
 		break;
 
-	/* continue and stop at next (return from) syscall */
-	case PTRACE_SYSCALL:
-	/* restart after signal */
-	case PTRACE_CONT:
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		if (request == PTRACE_SYSCALL)
-			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		else
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		child->exit_code = data;
-		/* XXX: Are we sure no breakpoints are active here? */
-		wake_up_process(child);
-		ret = 0;
-		break;
-
-	/*
-	 * Make the child exit. Best I can do is send it a
-	 * SIGKILL. Perhaps it should be put in the status that it
-	 * wants to exit.
-	 */
-	case PTRACE_KILL:
-		ret = 0;
-		if (child->exit_state == EXIT_ZOMBIE)
-			break;
-		child->exit_code = SIGKILL;
-		wake_up_process(child);
-		break;
-
-	/*
-	 * execute single instruction.
-	 */
-	case PTRACE_SINGLESTEP:
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		ptrace_single_step(child);
-		child->exit_code = data;
-		wake_up_process(child);
-		ret = 0;
-		break;
-
 	case PTRACE_GETREGS:
 		ret = ptrace_getregs(child, (void __user *)data);
 		break;
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 53c1e1d45c68..c078849df7f9 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -23,12 +23,15 @@ config RWSEM_XCHGADD_ALGORITHM
 
 config BLACKFIN
 	def_bool y
+	select HAVE_ARCH_KGDB
+	select HAVE_ARCH_TRACEHOOK
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_FUNCTION_TRACER
+	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
 	select HAVE_IDE
-	select HAVE_KERNEL_GZIP
-	select HAVE_KERNEL_BZIP2
-	select HAVE_KERNEL_LZMA
+	select HAVE_KERNEL_GZIP if RAMKERNEL
+	select HAVE_KERNEL_BZIP2 if RAMKERNEL
+	select HAVE_KERNEL_LZMA if RAMKERNEL
 	select HAVE_OPROFILE
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 
@@ -45,9 +48,6 @@ config ZONE_DMA
 config GENERIC_FIND_NEXT_BIT
 	def_bool y
 
-config GENERIC_HWEIGHT
-	def_bool y
-
 config GENERIC_HARDIRQS
 	def_bool y
 
@@ -239,7 +239,7 @@ endchoice
 
 config SMP
 	depends on BF561
-	select GENERIC_CLOCKEVENTS
+	select TICKSOURCE_CORETMR
 	bool "Symmetric multi-processing support"
 	---help---
 	  This enables support for systems with more than one CPU,
@@ -253,11 +253,20 @@ config NR_CPUS
 	depends on SMP
 	default 2 if BF561
 
+config HOTPLUG_CPU
+	bool "Support for hot-pluggable CPUs"
+	depends on SMP && HOTPLUG
+	default y
+
 config IRQ_PER_CPU
 	bool
 	depends on SMP
 	default y
 
+config HAVE_LEGACY_PER_CPU_AREA
+	def_bool y
+	depends on SMP
+
 config BF_REV_MIN
 	int
 	default 0 if (BF51x || BF52x || (BF54x && !BF54xM))
@@ -349,7 +358,7 @@ config MEM_MT48LC8M32B2B5_7
 
 config MEM_MT48LC32M16A2TG_75
 	bool
-	depends on (BFIN527_EZKIT || BFIN532_IP0X || BLACKSTAMP)
+	depends on (BFIN527_EZKIT || BFIN527_EZKIT_V2 || BFIN532_IP0X || BLACKSTAMP)
 	default y
 
 config MEM_MT48LC32M8A2_75
@@ -401,10 +410,18 @@ config BOOT_LOAD
 config ROM_BASE
 	hex "Kernel ROM Base"
 	depends on ROMKERNEL
-	default "0x20040000"
+	default "0x20040040"
 	range 0x20000000 0x20400000 if !(BF54x || BF561)
 	range 0x20000000 0x30000000 if (BF54x || BF561)
 	help
+	  Make sure your ROM base does not include any file-header
+	  information that is prepended to the kernel.
+
+	  For example, the bootable U-Boot format (created with
+	  mkimage) has a 64 byte header (0x40).  So while the image
+	  you write to flash might start at say 0x20080000, you have
+	  to add 0x40 to get the kernel's ROM base as it will come
+	  after the header.
 
 comment "Clock/PLL Setup"
 
@@ -448,7 +465,7 @@ config VCO_MULT
 	range 1 64
 	default "22" if BFIN533_EZKIT
 	default "45" if BFIN533_STAMP
-	default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT || BFIN548_BLUETECHNIX_CM || BFIN538_EZKIT)
+	default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN527_EZKIT_V2 || BFIN548_EZKIT || BFIN548_BLUETECHNIX_CM || BFIN538_EZKIT)
 	default "22" if BFIN533_BLUETECHNIX_CM
 	default "20" if (BFIN537_BLUETECHNIX_CM_E || BFIN537_BLUETECHNIX_CM_U || BFIN527_BLUETECHNIX_CM || BFIN561_BLUETECHNIX_CM)
 	default "20" if BFIN561_EZKIT
@@ -609,23 +626,23 @@ config GENERIC_CLOCKEVENTS
 	bool "Generic clock events"
 	default y
 
-choice
-	prompt "Kernel Tick Source"
+menu "Clock event device"
 	depends on GENERIC_CLOCKEVENTS
-	default TICKSOURCE_CORETMR
-
 config TICKSOURCE_GPTMR0
-	bool "Gptimer0 (SCLK domain)"
+	bool "GPTimer0"
+	depends on !SMP
 	select BFIN_GPTIMERS
 
 config TICKSOURCE_CORETMR
-	bool "Core timer (CCLK domain)"
-
-endchoice
+	bool "Core timer"
+	default y
+endmenu
 
-config CYCLES_CLOCKSOURCE
-	bool "Use 'CYCLES' as a clocksource"
+menu "Clock souce"
 	depends on GENERIC_CLOCKEVENTS
+config CYCLES_CLOCKSOURCE
+	bool "CYCLES"
+	default y
 	depends on !BFIN_SCRATCH_REG_CYCLES
 	depends on !SMP
 	help
@@ -636,10 +653,10 @@ config CYCLES_CLOCKSOURCE
 	  writing the registers will most likely crash the kernel.
 
 config GPTMR0_CLOCKSOURCE
-	bool "Use GPTimer0 as a clocksource"
+	bool "GPTimer0"
 	select BFIN_GPTIMERS
-	depends on GENERIC_CLOCKEVENTS
 	depends on !TICKSOURCE_GPTMR0
+endmenu
 
 config ARCH_USES_GETTIMEOFFSET
 	depends on !GENERIC_CLOCKEVENTS
@@ -1116,24 +1133,6 @@ config PCI
 
 source "drivers/pci/Kconfig"
 
-config HOTPLUG
-	bool "Support for hot-pluggable device"
-	  help
-	  Say Y here if you want to plug devices into your computer while
-	  the system is running, and be able to use them quickly.  In many
-	  cases, the devices can likewise be unplugged at any time too.
-
-	  One well known example of this is PCMCIA- or PC-cards, credit-card
-	  size devices such as network cards, modems or hard drives which are
-	  plugged into slots found on all modern laptop computers.  Another
-	  example, used on modern desktops as well as laptops, is USB.
-
-	  Enable HOTPLUG and build a modular kernel.  Get agent software
-	  (from <http://linux-hotplug.sourceforge.net/>) and install it.
-	  Then your kernel will automatically call out to a user mode "policy
-	  agent" (/sbin/hotplug) to load modules and set up software needed
-	  to use devices as you hotplug them.
-
 source "drivers/pcmcia/Kconfig"
 
 source "drivers/pci/hotplug/Kconfig"
@@ -1147,7 +1146,6 @@ source "fs/Kconfig.binfmt"
 endmenu
 
 menu "Power management options"
-	depends on !SMP
 
 source "kernel/power/Kconfig"
 
@@ -1240,7 +1238,6 @@ config PM_BFIN_WAKE_GP
 endmenu
 
 menu "CPU Frequency scaling"
-	depends on !SMP
 
 source "drivers/cpufreq/Kconfig"
 
diff --git a/arch/blackfin/Kconfig.debug b/arch/blackfin/Kconfig.debug
index 87f195ee2e06..aec89a5280b2 100644
--- a/arch/blackfin/Kconfig.debug
+++ b/arch/blackfin/Kconfig.debug
@@ -18,9 +18,6 @@ config DEBUG_STACK_USAGE
 
 	  This option will slow down process creation somewhat.
 
-config HAVE_ARCH_KGDB
-	def_bool y
-
 config DEBUG_VERBOSE
 	bool "Verbose fault messages"
 	default y
@@ -238,6 +235,15 @@ config EARLY_PRINTK
 	  all of this lives in the init section and is thrown away after the
 	  kernel boots completely.
 
+config NMI_WATCHDOG
+	bool "Enable NMI watchdog to help debugging lockup on SMP"
+	default n
+	depends on (SMP && !BFIN_SCRATCH_REG_RETN)
+	help
+	  If any CPU in the system does not execute the period local timer
+	  interrupt for more than 5 seconds, then the NMI handler dumps debug
+	  information. This information can be used to debug the lockup.
+
 config CPLB_INFO
 	bool "Display the CPLB information"
 	help
diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile
index d4c7177e7656..5a97a31d4bbd 100644
--- a/arch/blackfin/Makefile
+++ b/arch/blackfin/Makefile
@@ -14,6 +14,9 @@ OBJCOPYFLAGS     := -O binary -R .note -R .comment -S
 GZFLAGS          := -9
 
 KBUILD_CFLAGS           += $(call cc-option,-mno-fdpic)
+ifeq ($(CONFIG_ROMKERNEL),y)
+KBUILD_CFLAGS           += -mlong-calls
+endif
 KBUILD_AFLAGS           += $(call cc-option,-mno-fdpic)
 CFLAGS_MODULE    += -mlong-calls
 LDFLAGS_MODULE   += -m elf32bfin
@@ -130,7 +133,6 @@ KBUILD_CFLAGS += -Iarch/$(ARCH)/mach-$(MACHINE)/include
 KBUILD_CPPFLAGS	+= $(patsubst %,-I$(srctree)/%include,$(machdirs))
 
 CLEAN_FILES += \
-	arch/$(ARCH)/include/asm/asm-offsets.h \
 	arch/$(ARCH)/kernel/asm-offsets.s \
 
 archclean:
@@ -138,7 +140,7 @@ archclean:
 
 INSTALL_PATH ?= /tftpboot
 boot := arch/$(ARCH)/boot
-BOOT_TARGETS = vmImage vmImage.bin vmImage.bz2 vmImage.gz vmImage.lzma
+BOOT_TARGETS = vmImage vmImage.bin vmImage.bz2 vmImage.gz vmImage.lzma vmImage.xip
 PHONY += $(BOOT_TARGETS) install
 KBUILD_IMAGE := $(boot)/vmImage
 
@@ -156,6 +158,7 @@ define archhelp
   echo  '  vmImage.bz2     - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.bz2)'
   echo  '* vmImage.gz      - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.gz)'
   echo  '  vmImage.lzma    - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.lzma)'
+  echo  '  vmImage.xip     - XIP Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.xip)'
   echo  '  install         - Install kernel using'
   echo  '                     (your) ~/bin/$(INSTALLKERNEL) or'
   echo  '                     (distribution) PATH: $(INSTALLKERNEL) or'
diff --git a/arch/blackfin/boot/Makefile b/arch/blackfin/boot/Makefile
index e9c48c6f8c1f..d1b3d6051fdf 100644
--- a/arch/blackfin/boot/Makefile
+++ b/arch/blackfin/boot/Makefile
@@ -8,14 +8,18 @@
 
 MKIMAGE := $(srctree)/scripts/mkuboot.sh
 
-targets := vmImage vmImage.bin vmImage.bz2 vmImage.gz vmImage.lzma
-extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma
+targets := vmImage vmImage.bin vmImage.bz2 vmImage.gz vmImage.lzma vmImage.xip
+extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma vmlinux.bin.xip
+
+UIMAGE_OPTS-y :=
+UIMAGE_OPTS-$(CONFIG_RAMKERNEL) += -a $(CONFIG_BOOT_LOAD)
+UIMAGE_OPTS-$(CONFIG_ROMKERNEL) += -a $(CONFIG_ROM_BASE) -x
 
 quiet_cmd_uimage = UIMAGE  $@
       cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A $(ARCH) -O linux -T kernel \
-                   -C $(2) -n '$(MACHINE)-$(KERNELRELEASE)' -a $(CONFIG_BOOT_LOAD) \
+                   -C $(2) -n '$(MACHINE)-$(KERNELRELEASE)' \
                    -e $(shell $(NM) vmlinux | awk '$$NF == "__start" {print $$1}') \
-                   -d $< $@
+                   $(UIMAGE_OPTS-y) -d $< $@
 
 $(obj)/vmlinux.bin: vmlinux FORCE
 	$(call if_changed,objcopy)
@@ -29,6 +33,12 @@ $(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE
 $(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
 	$(call if_changed,lzma)
 
+# The mkimage tool wants 64bytes prepended to the image
+quiet_cmd_mk_bin_xip = BIN     $@
+      cmd_mk_bin_xip = ( printf '%64s' | tr ' ' '\377' ; cat $< ) > $@
+$(obj)/vmlinux.bin.xip: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,mk_bin_xip)
+
 $(obj)/vmImage.bin: $(obj)/vmlinux.bin
 	$(call if_changed,uimage,none)
 
@@ -41,10 +51,15 @@ $(obj)/vmImage.gz: $(obj)/vmlinux.bin.gz
 $(obj)/vmImage.lzma: $(obj)/vmlinux.bin.lzma
 	$(call if_changed,uimage,lzma)
 
+$(obj)/vmImage.xip: $(obj)/vmlinux.bin.xip
+	$(call if_changed,uimage,none)
+
 suffix-y                      := bin
 suffix-$(CONFIG_KERNEL_GZIP)  := gz
 suffix-$(CONFIG_KERNEL_BZIP2) := bz2
 suffix-$(CONFIG_KERNEL_LZMA)  := lzma
+suffix-$(CONFIG_ROMKERNEL)    := xip
+
 $(obj)/vmImage: $(obj)/vmImage.$(suffix-y)
 	@ln -sf $(notdir $<) $@
 
diff --git a/arch/blackfin/configs/BF518F-EZBRD_defconfig b/arch/blackfin/configs/BF518F-EZBRD_defconfig
index e31559419817..cf7c9bc94f13 100644
--- a/arch/blackfin/configs/BF518F-EZBRD_defconfig
+++ b/arch/blackfin/configs/BF518F-EZBRD_defconfig
@@ -1,22 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.10
-# Thu May 21 05:50:01 2009
+# Linux kernel version: 2.6.32.2
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 CONFIG_BLACKFIN=y
+CONFIG_GENERIC_CSUM=y
+CONFIG_GENERIC_BUG=y
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -26,22 +31,41 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -62,6 +86,10 @@ CONFIG_EPOLL=y
 # CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
@@ -69,11 +97,15 @@ CONFIG_SLAB=y
 # CONFIG_SLOB is not set
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -81,11 +113,8 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -101,7 +130,6 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
@@ -132,15 +160,15 @@ CONFIG_BF518=y
 # CONFIG_BF537 is not set
 # CONFIG_BF538 is not set
 # CONFIG_BF539 is not set
-# CONFIG_BF542 is not set
+# CONFIG_BF542_std is not set
 # CONFIG_BF542M is not set
-# CONFIG_BF544 is not set
+# CONFIG_BF544_std is not set
 # CONFIG_BF544M is not set
-# CONFIG_BF547 is not set
+# CONFIG_BF547_std is not set
 # CONFIG_BF547M is not set
-# CONFIG_BF548 is not set
+# CONFIG_BF548_std is not set
 # CONFIG_BF548M is not set
-# CONFIG_BF549 is not set
+# CONFIG_BF549_std is not set
 # CONFIG_BF549M is not set
 # CONFIG_BF561 is not set
 CONFIG_BF_REV_MIN=0
@@ -154,8 +182,8 @@ CONFIG_BF_REV_0_0=y
 # CONFIG_BF_REV_0_6 is not set
 # CONFIG_BF_REV_ANY is not set
 # CONFIG_BF_REV_NONE is not set
-CONFIG_BF51x=y
 CONFIG_MEM_MT48LC32M8A2_75=y
+CONFIG_BF51x=y
 CONFIG_BFIN518F_EZBRD=y
 
 #
@@ -313,7 +341,6 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
@@ -322,16 +349,18 @@ CONFIG_BFIN_GPTIMERS=m
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
+# CONFIG_DMA_UNCACHED_512K is not set
+# CONFIG_DMA_UNCACHED_256K is not set
+# CONFIG_DMA_UNCACHED_128K is not set
 # CONFIG_DMA_UNCACHED_NONE is not set
 
 #
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
-# CONFIG_BFIN_ICACHE_LOCK is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
 CONFIG_BFIN_EXTMEM_DCACHEABLE=y
 CONFIG_BFIN_EXTMEM_WRITEBACK=y
 # CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
@@ -342,7 +371,7 @@ CONFIG_BFIN_EXTMEM_WRITEBACK=y
 # CONFIG_MPU is not set
 
 #
-# Asynchonous Memory Configuration
+# Asynchronous Memory Configuration
 #
 
 #
@@ -398,11 +427,6 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -426,7 +450,6 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
@@ -437,6 +460,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -450,7 +474,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -461,13 +488,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -488,6 +510,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
@@ -545,6 +568,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 #
 # CONFIG_MTD_DATAFLASH is not set
 # CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -560,6 +584,11 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -576,10 +605,20 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -614,6 +653,9 @@ CONFIG_PHYLIB=y
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -622,10 +664,14 @@ CONFIG_BFIN_MAC=y
 CONFIG_BFIN_TX_DESC_NUM=10
 CONFIG_BFIN_RX_DESC_NUM=20
 # CONFIG_BFIN_MAC_RMII is not set
+CONFIG_BFIN_MAC_USE_HWSTAMP=y
 # CONFIG_SMC91X is not set
-# CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_ADF702X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -634,15 +680,16 @@ CONFIG_BFIN_RX_DESC_NUM=20
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
 
 #
-# Wireless LAN
+# Enable WiMAX (Networking options) to see the WiMAX drivers
 #
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -677,7 +724,10 @@ CONFIG_INPUT=y
 # CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_UINPUT is not set
-# CONFIG_CONFIG_INPUT_PCF8574 is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+# CONFIG_INPUT_AD714X is not set
+# CONFIG_INPUT_ADXL34X is not set
+# CONFIG_INPUT_PCF8574 is not set
 
 #
 # Hardware I/O ports
@@ -688,16 +738,13 @@ CONFIG_INPUT_MISC=y
 #
 # Character devices
 #
-# CONFIG_AD9960 is not set
 CONFIG_BFIN_DMA_INTERFACE=m
 # CONFIG_BFIN_PPI is not set
 # CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
 # CONFIG_BFIN_SPI_ADC is not set
 # CONFIG_BFIN_SPORT is not set
-# CONFIG_BFIN_TIMER_LATENCY is not set
 # CONFIG_BFIN_TWI_LCD is not set
-CONFIG_SIMPLE_GPIO=m
 CONFIG_VT=y
 CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
@@ -715,6 +762,7 @@ CONFIG_BFIN_JTAG_COMM=m
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
 CONFIG_SERIAL_BFIN_DMA=y
@@ -726,12 +774,10 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# CAN, the car bus and industrial fieldbus
-#
-# CONFIG_CAN4LINUX is not set
+CONFIG_BFIN_OTP=y
+# CONFIG_BFIN_OTP_WRITE_ENABLE is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
@@ -739,6 +785,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -771,14 +818,6 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_SENSORS_AD5252 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -795,13 +834,18 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_BFIN_LOCK is not set
 # CONFIG_SPI_BFIN_SPORT is not set
 # CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
 
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
@@ -817,6 +861,7 @@ CONFIG_GPIO_SYSFS=y
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
 # PCI GPIO expanders:
@@ -827,11 +872,15 @@ CONFIG_GPIO_SYSFS=y
 #
 # CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -853,28 +902,20 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -912,10 +953,11 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_SPI is not set
 CONFIG_SDH_BFIN=m
 CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND=y
-# CONFIG_SDH_BFIN_ENABLE_SDIO_IRQ is not set
-# CONFIG_MMC_SPI is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
@@ -950,6 +992,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -961,6 +1004,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -981,10 +1025,21 @@ CONFIG_RTC_INTF_DEV=y
 #
 CONFIG_RTC_DRV_BFIN=y
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
+# Firmware Drivers
+#
+# CONFIG_FIRMWARE_MEMMAP is not set
+# CONFIG_SIGMA is not set
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=m
@@ -994,9 +1049,13 @@ CONFIG_EXT2_FS=m
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1006,6 +1065,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1027,13 +1091,9 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1042,8 +1102,8 @@ CONFIG_SYSFS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
-# CONFIG_YAFFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1062,7 +1122,6 @@ CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1127,14 +1186,19 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_SECTION_MISMATCH=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1142,31 +1206,39 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_NOMMU_REGIONS is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
-
-#
-# Tracers
-#
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_BRANCH_PROFILE_NONE is not set
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -1191,6 +1263,7 @@ CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
+# CONFIG_BFIN_ISRAM_SELF_TEST is not set
 
 #
 # Security options
@@ -1199,14 +1272,14 @@ CONFIG_ACCESS_CHECK=y
 CONFIG_SECURITY=y
 # CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_PATH is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1238,11 +1311,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1279,6 +1354,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -1286,11 +1362,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1299,6 +1377,8 @@ CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/BF526-EZBRD_defconfig b/arch/blackfin/configs/BF526-EZBRD_defconfig
index 075e0fdcb399..31c2a6db6ec5 100644
--- a/arch/blackfin/configs/BF526-EZBRD_defconfig
+++ b/arch/blackfin/configs/BF526-EZBRD_defconfig
@@ -1,22 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.10
-# Thu May 21 05:50:01 2009
+# Linux kernel version: 2.6.32.2
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 CONFIG_BLACKFIN=y
+CONFIG_GENERIC_CSUM=y
+CONFIG_GENERIC_BUG=y
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -26,22 +31,41 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -62,6 +86,10 @@ CONFIG_EPOLL=y
 # CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
@@ -69,11 +97,15 @@ CONFIG_SLAB=y
 # CONFIG_SLOB is not set
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -81,11 +113,8 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -101,7 +130,6 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
@@ -132,15 +160,15 @@ CONFIG_BF526=y
 # CONFIG_BF537 is not set
 # CONFIG_BF538 is not set
 # CONFIG_BF539 is not set
-# CONFIG_BF542 is not set
+# CONFIG_BF542_std is not set
 # CONFIG_BF542M is not set
-# CONFIG_BF544 is not set
+# CONFIG_BF544_std is not set
 # CONFIG_BF544M is not set
-# CONFIG_BF547 is not set
+# CONFIG_BF547_std is not set
 # CONFIG_BF547M is not set
-# CONFIG_BF548 is not set
+# CONFIG_BF548_std is not set
 # CONFIG_BF548M is not set
-# CONFIG_BF549 is not set
+# CONFIG_BF549_std is not set
 # CONFIG_BF549M is not set
 # CONFIG_BF561 is not set
 CONFIG_BF_REV_MIN=0
@@ -154,8 +182,7 @@ CONFIG_BF_REV_0_0=y
 # CONFIG_BF_REV_0_6 is not set
 # CONFIG_BF_REV_ANY is not set
 # CONFIG_BF_REV_NONE is not set
-CONFIG_BF52x=y
-CONFIG_MEM_MT48LC32M16A2TG_75=y
+CONFIG_MEM_MT48H32M16LFCJ_75=y
 CONFIG_IRQ_PLL_WAKEUP=7
 CONFIG_IRQ_DMA0_ERROR=7
 CONFIG_IRQ_DMAR0_BLK=7
@@ -200,7 +227,9 @@ CONFIG_IRQ_MEM_DMA1=13
 CONFIG_IRQ_WATCH=13
 CONFIG_IRQ_PORTF_INTA=13
 CONFIG_IRQ_PORTF_INTB=13
+CONFIG_BF52x=y
 # CONFIG_BFIN527_EZKIT is not set
+# CONFIG_BFIN527_EZKIT_V2 is not set
 # CONFIG_BFIN527_BLUETECHNIX_CM is not set
 CONFIG_BFIN526_EZBRD=y
 
@@ -318,7 +347,6 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
@@ -327,16 +355,18 @@ CONFIG_BFIN_GPTIMERS=m
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
+# CONFIG_DMA_UNCACHED_512K is not set
+# CONFIG_DMA_UNCACHED_256K is not set
+# CONFIG_DMA_UNCACHED_128K is not set
 # CONFIG_DMA_UNCACHED_NONE is not set
 
 #
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
-# CONFIG_BFIN_ICACHE_LOCK is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
 CONFIG_BFIN_EXTMEM_DCACHEABLE=y
 CONFIG_BFIN_EXTMEM_WRITEBACK=y
 # CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
@@ -347,6 +377,10 @@ CONFIG_BFIN_EXTMEM_WRITEBACK=y
 # CONFIG_MPU is not set
 
 #
+# Asynchronous Memory Configuration
+#
+
+#
 # EBIU_AMGCTL Global Control
 #
 CONFIG_C_AMCKEN=y
@@ -399,11 +433,6 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -427,7 +456,6 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
@@ -438,6 +466,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -451,7 +480,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -462,13 +494,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -489,6 +516,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
@@ -549,6 +577,7 @@ CONFIG_MTD_PHYSMAP=y
 # CONFIG_MTD_DATAFLASH is not set
 CONFIG_MTD_M25P80=y
 CONFIG_M25PXX_USE_FAST_READ=y
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -564,11 +593,6 @@ CONFIG_MTD_NAND=m
 # CONFIG_MTD_NAND_VERIFY_WRITE is not set
 # CONFIG_MTD_NAND_ECC_SMC is not set
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_BFIN=m
-CONFIG_BFIN_NAND_BASE=0x20212000
-CONFIG_BFIN_NAND_CLE=2
-CONFIG_BFIN_NAND_ALE=1
-CONFIG_BFIN_NAND_READY=3
 CONFIG_MTD_NAND_IDS=m
 # CONFIG_MTD_NAND_BF5XX is not set
 # CONFIG_MTD_NAND_DISKONCHIP is not set
@@ -578,6 +602,11 @@ CONFIG_MTD_NAND_IDS=m
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -595,10 +624,20 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -622,10 +661,6 @@ CONFIG_BLK_DEV_SR=m
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -642,6 +677,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
@@ -666,6 +702,9 @@ CONFIG_PHYLIB=y
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -675,9 +714,12 @@ CONFIG_BFIN_TX_DESC_NUM=10
 CONFIG_BFIN_RX_DESC_NUM=20
 CONFIG_BFIN_MAC_RMII=y
 # CONFIG_SMC91X is not set
-# CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_ADF702X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -686,15 +728,16 @@ CONFIG_BFIN_MAC_RMII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
 
 #
-# Wireless LAN
+# Enable WiMAX (Networking options) to see the WiMAX drivers
 #
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -744,7 +787,11 @@ CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_YEALINK is not set
 # CONFIG_INPUT_CM109 is not set
 # CONFIG_INPUT_UINPUT is not set
-# CONFIG_CONFIG_INPUT_PCF8574 is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+# CONFIG_INPUT_BFIN_ROTARY is not set
+# CONFIG_INPUT_AD714X is not set
+# CONFIG_INPUT_ADXL34X is not set
+# CONFIG_INPUT_PCF8574 is not set
 
 #
 # Hardware I/O ports
@@ -755,16 +802,13 @@ CONFIG_INPUT_MISC=y
 #
 # Character devices
 #
-# CONFIG_AD9960 is not set
 CONFIG_BFIN_DMA_INTERFACE=m
 # CONFIG_BFIN_PPI is not set
 # CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
 # CONFIG_BFIN_SPI_ADC is not set
 # CONFIG_BFIN_SPORT is not set
-# CONFIG_BFIN_TIMER_LATENCY is not set
 # CONFIG_BFIN_TWI_LCD is not set
-CONFIG_SIMPLE_GPIO=m
 CONFIG_VT=y
 CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
@@ -782,6 +826,7 @@ CONFIG_BFIN_JTAG_COMM=m
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
 CONFIG_SERIAL_BFIN_DMA=y
@@ -793,14 +838,10 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_BFIN_OTP=y
 # CONFIG_BFIN_OTP_WRITE_ENABLE is not set
-
-#
-# CAN, the car bus and industrial fieldbus
-#
-# CONFIG_CAN4LINUX is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
@@ -808,6 +849,7 @@ CONFIG_BFIN_OTP=y
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=m
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -841,14 +883,6 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_SENSORS_AD5252 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -865,13 +899,18 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_BFIN_LOCK is not set
 # CONFIG_SPI_BFIN_SPORT is not set
 # CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
 
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
@@ -887,6 +926,7 @@ CONFIG_GPIO_SYSFS=y
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
 # PCI GPIO expanders:
@@ -897,11 +937,20 @@ CONFIG_GPIO_SYSFS=y
 #
 # CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD5252 is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADCXX is not set
@@ -914,11 +963,13 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -934,17 +985,24 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1111 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
@@ -954,9 +1012,8 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -983,28 +1040,20 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1026,7 +1075,6 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1039,30 +1087,35 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
@@ -1088,6 +1141,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_ISP1362_HCD is not set
@@ -1118,18 +1172,17 @@ CONFIG_USB_INVENTRA_DMA=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1165,7 +1218,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1177,6 +1229,13 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+CONFIG_NOP_USB_XCEIV=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1212,6 +1271,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1223,6 +1283,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -1243,10 +1304,21 @@ CONFIG_RTC_INTF_DEV=y
 #
 CONFIG_RTC_DRV_BFIN=y
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
+# Firmware Drivers
+#
+# CONFIG_FIRMWARE_MEMMAP is not set
+# CONFIG_SIGMA is not set
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=m
@@ -1256,9 +1328,13 @@ CONFIG_EXT2_FS=m
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1268,6 +1344,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 CONFIG_ISO9660_FS=m
@@ -1291,13 +1372,9 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1316,17 +1393,8 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
-CONFIG_YAFFS_FS=m
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1345,7 +1413,6 @@ CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1360,7 +1427,7 @@ CONFIG_SMB_FS=m
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
+CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
 # CONFIG_NLS_CODEPAGE_737 is not set
@@ -1410,14 +1477,19 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_SECTION_MISMATCH=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1425,31 +1497,39 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_NOMMU_REGIONS is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
-
-#
-# Tracers
-#
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_BRANCH_PROFILE_NONE is not set
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -1474,6 +1554,7 @@ CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
+# CONFIG_BFIN_ISRAM_SELF_TEST is not set
 
 #
 # Security options
@@ -1482,15 +1563,15 @@ CONFIG_ACCESS_CHECK=y
 CONFIG_SECURITY=y
 # CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_PATH is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_SECURITY_ROOTPLUG is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1522,11 +1603,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1563,6 +1646,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -1570,11 +1654,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1584,6 +1670,8 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/BF527-EZKIT-V2_defconfig b/arch/blackfin/configs/BF527-EZKIT-V2_defconfig
new file mode 100644
index 000000000000..d2dfcb0e7ce4
--- /dev/null
+++ b/arch/blackfin/configs/BF527-EZKIT-V2_defconfig
@@ -0,0 +1,1811 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32.2
+#
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_BLACKFIN=y
+CONFIG_GENERIC_CSUM=y
+CONFIG_GENERIC_BUG=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+CONFIG_EPOLL=y
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+# CONFIG_FREEZER is not set
+
+#
+# Blackfin Processor Options
+#
+
+#
+# Processor and Board Settings
+#
+# CONFIG_BF512 is not set
+# CONFIG_BF514 is not set
+# CONFIG_BF516 is not set
+# CONFIG_BF518 is not set
+# CONFIG_BF522 is not set
+# CONFIG_BF523 is not set
+# CONFIG_BF524 is not set
+# CONFIG_BF525 is not set
+# CONFIG_BF526 is not set
+CONFIG_BF527=y
+# CONFIG_BF531 is not set
+# CONFIG_BF532 is not set
+# CONFIG_BF533 is not set
+# CONFIG_BF534 is not set
+# CONFIG_BF536 is not set
+# CONFIG_BF537 is not set
+# CONFIG_BF538 is not set
+# CONFIG_BF539 is not set
+# CONFIG_BF542_std is not set
+# CONFIG_BF542M is not set
+# CONFIG_BF544_std is not set
+# CONFIG_BF544M is not set
+# CONFIG_BF547_std is not set
+# CONFIG_BF547M is not set
+# CONFIG_BF548_std is not set
+# CONFIG_BF548M is not set
+# CONFIG_BF549_std is not set
+# CONFIG_BF549M is not set
+# CONFIG_BF561 is not set
+CONFIG_BF_REV_MIN=0
+CONFIG_BF_REV_MAX=2
+# CONFIG_BF_REV_0_0 is not set
+# CONFIG_BF_REV_0_1 is not set
+CONFIG_BF_REV_0_2=y
+# CONFIG_BF_REV_0_3 is not set
+# CONFIG_BF_REV_0_4 is not set
+# CONFIG_BF_REV_0_5 is not set
+# CONFIG_BF_REV_0_6 is not set
+# CONFIG_BF_REV_ANY is not set
+# CONFIG_BF_REV_NONE is not set
+CONFIG_MEM_MT48LC32M16A2TG_75=y
+CONFIG_IRQ_PLL_WAKEUP=7
+CONFIG_IRQ_DMA0_ERROR=7
+CONFIG_IRQ_DMAR0_BLK=7
+CONFIG_IRQ_DMAR1_BLK=7
+CONFIG_IRQ_DMAR0_OVR=7
+CONFIG_IRQ_DMAR1_OVR=7
+CONFIG_IRQ_PPI_ERROR=7
+CONFIG_IRQ_MAC_ERROR=7
+CONFIG_IRQ_SPORT0_ERROR=7
+CONFIG_IRQ_SPORT1_ERROR=7
+CONFIG_IRQ_UART0_ERROR=7
+CONFIG_IRQ_UART1_ERROR=7
+CONFIG_IRQ_RTC=8
+CONFIG_IRQ_PPI=8
+CONFIG_IRQ_SPORT0_RX=9
+CONFIG_IRQ_SPORT0_TX=9
+CONFIG_IRQ_SPORT1_RX=9
+CONFIG_IRQ_SPORT1_TX=9
+CONFIG_IRQ_TWI=10
+CONFIG_IRQ_UART0_RX=10
+CONFIG_IRQ_UART0_TX=10
+CONFIG_IRQ_UART1_RX=10
+CONFIG_IRQ_UART1_TX=10
+CONFIG_IRQ_OPTSEC=11
+CONFIG_IRQ_CNT=11
+CONFIG_IRQ_MAC_RX=11
+CONFIG_IRQ_PORTH_INTA=11
+CONFIG_IRQ_MAC_TX=11
+CONFIG_IRQ_PORTH_INTB=11
+CONFIG_IRQ_TIMER0=8
+CONFIG_IRQ_TIMER1=12
+CONFIG_IRQ_TIMER2=12
+CONFIG_IRQ_TIMER3=12
+CONFIG_IRQ_TIMER4=12
+CONFIG_IRQ_TIMER5=12
+CONFIG_IRQ_TIMER6=12
+CONFIG_IRQ_TIMER7=12
+CONFIG_IRQ_PORTG_INTA=12
+CONFIG_IRQ_PORTG_INTB=12
+CONFIG_IRQ_MEM_DMA0=13
+CONFIG_IRQ_MEM_DMA1=13
+CONFIG_IRQ_WATCH=13
+CONFIG_IRQ_PORTF_INTA=13
+CONFIG_IRQ_PORTF_INTB=13
+CONFIG_BF52x=y
+# CONFIG_BFIN527_EZKIT is not set
+CONFIG_BFIN527_EZKIT_V2=y
+# CONFIG_BFIN527_BLUETECHNIX_CM is not set
+# CONFIG_BFIN526_EZBRD is not set
+
+#
+# BF527 Specific Configuration
+#
+
+#
+# Alternative Multiplexing Scheme
+#
+# CONFIG_BF527_SPORT0_PORTF is not set
+CONFIG_BF527_SPORT0_PORTG=y
+CONFIG_BF527_SPORT0_TSCLK_PG10=y
+# CONFIG_BF527_SPORT0_TSCLK_PG14 is not set
+CONFIG_BF527_UART1_PORTF=y
+# CONFIG_BF527_UART1_PORTG is not set
+# CONFIG_BF527_NAND_D_PORTF is not set
+CONFIG_BF527_NAND_D_PORTH=y
+
+#
+# Interrupt Priority Assignment
+#
+
+#
+# Priority
+#
+CONFIG_IRQ_SPI=10
+CONFIG_IRQ_SPI_ERROR=7
+CONFIG_IRQ_NFC_ERROR=7
+CONFIG_IRQ_HDMA_ERROR=7
+CONFIG_IRQ_HDMA=7
+CONFIG_IRQ_USB_EINT=10
+CONFIG_IRQ_USB_INT0=11
+CONFIG_IRQ_USB_INT1=11
+CONFIG_IRQ_USB_INT2=11
+CONFIG_IRQ_USB_DMA=11
+
+#
+# Board customizations
+#
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
+
+#
+# Clock/PLL Setup
+#
+CONFIG_CLKIN_HZ=25000000
+# CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_VCO_HZ=600000000
+CONFIG_MIN_VCO_HZ=50000000
+CONFIG_MAX_SCLK_HZ=133333333
+CONFIG_MIN_SCLK_HZ=27000000
+
+#
+# Kernel Timer/Scheduler
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_TICKSOURCE_GPTMR0 is not set
+CONFIG_TICKSOURCE_CORETMR=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_GPTMR0_CLOCKSOURCE is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# Misc
+#
+CONFIG_BFIN_SCRATCH_REG_RETN=y
+# CONFIG_BFIN_SCRATCH_REG_RETE is not set
+# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
+
+#
+# Blackfin Kernel Optimizations
+#
+
+#
+# Memory Optimizations
+#
+CONFIG_I_ENTRY_L1=y
+CONFIG_EXCPT_IRQ_SYSC_L1=y
+CONFIG_DO_IRQ_L1=y
+CONFIG_CORE_TIMER_IRQ_L1=y
+CONFIG_IDLE_L1=y
+# CONFIG_SCHEDULE_L1 is not set
+CONFIG_ARITHMETIC_OPS_L1=y
+CONFIG_ACCESS_OK_L1=y
+# CONFIG_MEMSET_L1 is not set
+# CONFIG_MEMCPY_L1 is not set
+# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
+# CONFIG_IP_CHECKSUM_L1 is not set
+CONFIG_CACHELINE_ALIGNED_L1=y
+# CONFIG_SYSCALL_TAB_L1 is not set
+# CONFIG_CPLB_SWITCH_TAB_L1 is not set
+CONFIG_APP_STACK_L1=y
+
+#
+# Speed Optimizations
+#
+CONFIG_BFIN_INS_LOWOVERHEAD=y
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
+CONFIG_BFIN_GPTIMERS=y
+# CONFIG_DMA_UNCACHED_4M is not set
+# CONFIG_DMA_UNCACHED_2M is not set
+CONFIG_DMA_UNCACHED_1M=y
+# CONFIG_DMA_UNCACHED_512K is not set
+# CONFIG_DMA_UNCACHED_256K is not set
+# CONFIG_DMA_UNCACHED_128K is not set
+# CONFIG_DMA_UNCACHED_NONE is not set
+
+#
+# Cache Support
+#
+CONFIG_BFIN_ICACHE=y
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_DCACHE=y
+# CONFIG_BFIN_DCACHE_BANKA is not set
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+
+#
+# Memory Protection Unit
+#
+# CONFIG_MPU is not set
+
+#
+# Asynchronous Memory Configuration
+#
+
+#
+# EBIU_AMGCTL Global Control
+#
+CONFIG_C_AMCKEN=y
+CONFIG_C_CDPRIO=y
+# CONFIG_C_AMBEN is not set
+# CONFIG_C_AMBEN_B0 is not set
+# CONFIG_C_AMBEN_B0_B1 is not set
+# CONFIG_C_AMBEN_B0_B1_B2 is not set
+CONFIG_C_AMBEN_ALL=y
+
+#
+# EBIU_AMBCTL Control
+#
+CONFIG_BANK_0=0x7BB0
+CONFIG_BANK_1=0x7BB0
+CONFIG_BANK_2=0x7BB0
+CONFIG_BANK_3=0x99B2
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF_FDPIC=y
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+# CONFIG_IRDA_CACHE_LAST_LSAP is not set
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+CONFIG_BFIN_SIR=m
+CONFIG_BFIN_SIR0=y
+CONFIG_SIR_BFIN_DMA=y
+# CONFIG_SIR_BFIN_PIO is not set
+
+#
+# Dongle support
+#
+# CONFIG_DONGLE is not set
+# CONFIG_KINGSUN_DONGLE is not set
+# CONFIG_KSDAZZLE_DONGLE is not set
+# CONFIG_KS959_DONGLE is not set
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+# CONFIG_MCS_FIR is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=m
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_GPIO_ADDR is not set
+# CONFIG_MTD_UCLINUX is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+CONFIG_MTD_M25P80=y
+CONFIG_M25PXX_USE_FAST_READ=y
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=m
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=m
+# CONFIG_MTD_NAND_BF5XX is not set
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_BFIN_MAC=y
+CONFIG_BFIN_MAC_USE_L1=y
+CONFIG_BFIN_TX_DESC_NUM=10
+CONFIG_BFIN_RX_DESC_NUM=20
+CONFIG_BFIN_MAC_RMII=y
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_ADF702X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ADP5520=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+CONFIG_TOUCHSCREEN_AD7879_I2C=y
+CONFIG_TOUCHSCREEN_AD7879=y
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_WM97XX is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+# CONFIG_INPUT_BFIN_ROTARY is not set
+# CONFIG_INPUT_AD714X is not set
+# CONFIG_INPUT_ADXL34X is not set
+# CONFIG_INPUT_PCF8574 is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_PPI is not set
+# CONFIG_BFIN_PPIFCD is not set
+# CONFIG_BFIN_SIMPLE_TIMER is not set
+# CONFIG_BFIN_SPI_ADC is not set
+CONFIG_BFIN_SPORT=m
+# CONFIG_BFIN_TWI_LCD is not set
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_BFIN_JTAG_COMM=m
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+CONFIG_SERIAL_BFIN_DMA=y
+# CONFIG_SERIAL_BFIN_PIO is not set
+# CONFIG_SERIAL_BFIN_UART0 is not set
+CONFIG_SERIAL_BFIN_UART1=y
+# CONFIG_BFIN_UART1_CTSRTS is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_BFIN_SPORT is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_BFIN_OTP=y
+# CONFIG_BFIN_OTP_WRITE_ENABLE is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_BLACKFIN_TWI=y
+CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BFIN=y
+# CONFIG_SPI_BFIN_LOCK is not set
+# CONFIG_SPI_BFIN_SPORT is not set
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5520 is not set
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+CONFIG_PMIC_ADP5520=y
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_BFIN_T350MCQB is not set
+CONFIG_FB_BFIN_LQ035Q1=y
+# CONFIG_FB_BFIN_7393 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_LMS283GF05 is not set
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=m
+CONFIG_BACKLIGHT_GENERIC=m
+# CONFIG_BACKLIGHT_ADP5520 is not set
+# CONFIG_BACKLIGHT_ADP8870 is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_LOGO_BLACKFIN_VGA16 is not set
+CONFIG_LOGO_BLACKFIN_CLUT224=y
+CONFIG_SOUND=m
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_SPI=y
+
+#
+# ALSA Blackfin devices
+#
+# CONFIG_SND_BFIN_AD73322 is not set
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+CONFIG_SND_SOC=m
+CONFIG_SND_SOC_AC97_BUS=y
+CONFIG_SND_BF5XX_I2S=m
+CONFIG_SND_BF5XX_SOC_SSM2602=m
+# CONFIG_SND_BF5XX_SOC_AD73311 is not set
+# CONFIG_SND_BF5XX_SOC_ADAU1371 is not set
+# CONFIG_SND_BF5XX_SOC_ADAU1761 is not set
+# CONFIG_SND_BF5XX_TDM is not set
+CONFIG_SND_BF5XX_AC97=m
+CONFIG_SND_BF5XX_MMAP_SUPPORT=y
+# CONFIG_SND_BF5XX_MULTICHAN_SUPPORT is not set
+# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
+CONFIG_SND_BF5XX_SOC_AD1980=m
+CONFIG_SND_BF5XX_SOC_SPORT=m
+CONFIG_SND_BF5XX_SOC_I2S=m
+CONFIG_SND_BF5XX_SOC_AC97=m
+CONFIG_SND_BF5XX_SPORT_NUM=0
+CONFIG_SND_SOC_I2C_AND_SPI=m
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_AD1980=m
+CONFIG_SND_SOC_SSM2602=m
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+# CONFIG_HID_DRAGONRISE is not set
+CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
+CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+CONFIG_USB_OTG_BLACKLIST_HUB=y
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# Blackfin high speed USB Support
+#
+CONFIG_USB_MUSB_HOST=y
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+# CONFIG_USB_MUSB_OTG is not set
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+# CONFIG_USB_MUSB_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+CONFIG_NOP_USB_XCEIV=y
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_GPIO is not set
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+CONFIG_LEDS_ADP5520=y
+
+#
+# LED Triggers
+#
+# CONFIG_LEDS_TRIGGERS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_BFIN=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# Firmware Drivers
+#
+# CONFIG_FIRMWARE_MEMMAP is not set
+# CONFIG_SIGMA is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=m
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+CONFIG_NLS_CODEPAGE_936=m
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_SECTION_MISMATCH=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_NOMMU_REGIONS is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_FRAME_POINTER is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_BRANCH_PROFILE_NONE is not set
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_VERBOSE=y
+CONFIG_DEBUG_MMRS=y
+CONFIG_DEBUG_HWERR=y
+CONFIG_EXACT_HWERR=y
+CONFIG_DEBUG_DOUBLEFAULT=y
+CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
+# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
+# CONFIG_DEBUG_ICACHE_CHECK is not set
+CONFIG_DEBUG_HUNT_FOR_ZERO=y
+CONFIG_DEBUG_BFIN_HWTRACE_ON=y
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
+# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
+CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_CPLB_INFO=y
+CONFIG_ACCESS_CHECK=y
+# CONFIG_BFIN_ISRAM_SELF_TEST is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_SECURITY_ROOTPLUG is not set
+# CONFIG_SECURITY_TOMOYO is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig
index 6d1a623fb149..edbb44d26bbf 100644
--- a/arch/blackfin/configs/BF527-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF527-EZKIT_defconfig
@@ -1,22 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.10
-# Thu May 21 05:50:01 2009
+# Linux kernel version: 2.6.32.2
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 CONFIG_BLACKFIN=y
+CONFIG_GENERIC_CSUM=y
+CONFIG_GENERIC_BUG=y
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -26,22 +31,41 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -62,6 +86,10 @@ CONFIG_EPOLL=y
 # CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
@@ -69,11 +97,15 @@ CONFIG_SLAB=y
 # CONFIG_SLOB is not set
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -81,11 +113,8 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -101,7 +130,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
@@ -132,29 +160,28 @@ CONFIG_BF527=y
 # CONFIG_BF537 is not set
 # CONFIG_BF538 is not set
 # CONFIG_BF539 is not set
-# CONFIG_BF542 is not set
+# CONFIG_BF542_std is not set
 # CONFIG_BF542M is not set
-# CONFIG_BF544 is not set
+# CONFIG_BF544_std is not set
 # CONFIG_BF544M is not set
-# CONFIG_BF547 is not set
+# CONFIG_BF547_std is not set
 # CONFIG_BF547M is not set
-# CONFIG_BF548 is not set
+# CONFIG_BF548_std is not set
 # CONFIG_BF548M is not set
-# CONFIG_BF549 is not set
+# CONFIG_BF549_std is not set
 # CONFIG_BF549M is not set
 # CONFIG_BF561 is not set
 CONFIG_BF_REV_MIN=0
 CONFIG_BF_REV_MAX=2
 # CONFIG_BF_REV_0_0 is not set
-# CONFIG_BF_REV_0_1 is not set
-CONFIG_BF_REV_0_2=y
+CONFIG_BF_REV_0_1=y
+# CONFIG_BF_REV_0_2 is not set
 # CONFIG_BF_REV_0_3 is not set
 # CONFIG_BF_REV_0_4 is not set
 # CONFIG_BF_REV_0_5 is not set
 # CONFIG_BF_REV_0_6 is not set
 # CONFIG_BF_REV_ANY is not set
 # CONFIG_BF_REV_NONE is not set
-CONFIG_BF52x=y
 CONFIG_MEM_MT48LC32M16A2TG_75=y
 CONFIG_IRQ_PLL_WAKEUP=7
 CONFIG_IRQ_DMA0_ERROR=7
@@ -200,7 +227,9 @@ CONFIG_IRQ_MEM_DMA1=13
 CONFIG_IRQ_WATCH=13
 CONFIG_IRQ_PORTF_INTA=13
 CONFIG_IRQ_PORTF_INTB=13
+CONFIG_BF52x=y
 CONFIG_BFIN527_EZKIT=y
+# CONFIG_BFIN527_EZKIT_V2 is not set
 # CONFIG_BFIN527_BLUETECHNIX_CM is not set
 # CONFIG_BFIN526_EZBRD is not set
 
@@ -318,7 +347,6 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
@@ -327,16 +355,18 @@ CONFIG_BFIN_GPTIMERS=y
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
+# CONFIG_DMA_UNCACHED_512K is not set
+# CONFIG_DMA_UNCACHED_256K is not set
+# CONFIG_DMA_UNCACHED_128K is not set
 # CONFIG_DMA_UNCACHED_NONE is not set
 
 #
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
-# CONFIG_BFIN_ICACHE_LOCK is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
 CONFIG_BFIN_EXTMEM_DCACHEABLE=y
 CONFIG_BFIN_EXTMEM_WRITEBACK=y
 # CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
@@ -347,7 +377,7 @@ CONFIG_BFIN_EXTMEM_WRITEBACK=y
 # CONFIG_MPU is not set
 
 #
-# Asynchonous Memory Configuration
+# Asynchronous Memory Configuration
 #
 
 #
@@ -403,11 +433,6 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -431,7 +456,6 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
@@ -442,6 +466,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -455,7 +480,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -508,13 +536,8 @@ CONFIG_SIR_BFIN_DMA=y
 # CONFIG_MCS_FIR is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -535,6 +558,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
@@ -593,6 +617,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 # CONFIG_MTD_DATAFLASH is not set
 CONFIG_MTD_M25P80=y
 CONFIG_M25PXX_USE_FAST_READ=y
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -608,11 +633,6 @@ CONFIG_MTD_NAND=m
 # CONFIG_MTD_NAND_VERIFY_WRITE is not set
 # CONFIG_MTD_NAND_ECC_SMC is not set
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_BFIN=m
-CONFIG_BFIN_NAND_BASE=0x20212000
-CONFIG_BFIN_NAND_CLE=2
-CONFIG_BFIN_NAND_ALE=1
-CONFIG_BFIN_NAND_READY=3
 CONFIG_MTD_NAND_IDS=m
 # CONFIG_MTD_NAND_BF5XX is not set
 # CONFIG_MTD_NAND_DISKONCHIP is not set
@@ -622,6 +642,11 @@ CONFIG_MTD_NAND_IDS=m
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -639,10 +664,20 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -666,10 +701,6 @@ CONFIG_BLK_DEV_SR=m
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -686,6 +717,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
@@ -710,6 +742,9 @@ CONFIG_PHYLIB=y
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -720,9 +755,12 @@ CONFIG_BFIN_TX_DESC_NUM=10
 CONFIG_BFIN_RX_DESC_NUM=20
 CONFIG_BFIN_MAC_RMII=y
 # CONFIG_SMC91X is not set
-# CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_ADF702X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -731,15 +769,16 @@ CONFIG_BFIN_MAC_RMII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
 
 #
-# Wireless LAN
+# Enable WiMAX (Networking options) to see the WiMAX drivers
 #
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -789,7 +828,11 @@ CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_YEALINK is not set
 # CONFIG_INPUT_CM109 is not set
 # CONFIG_INPUT_UINPUT is not set
-# CONFIG_CONFIG_INPUT_PCF8574 is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+# CONFIG_INPUT_BFIN_ROTARY is not set
+# CONFIG_INPUT_AD714X is not set
+# CONFIG_INPUT_ADXL34X is not set
+# CONFIG_INPUT_PCF8574 is not set
 
 #
 # Hardware I/O ports
@@ -800,16 +843,13 @@ CONFIG_INPUT_MISC=y
 #
 # Character devices
 #
-# CONFIG_AD9960 is not set
 CONFIG_BFIN_DMA_INTERFACE=m
 # CONFIG_BFIN_PPI is not set
 # CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
 # CONFIG_BFIN_SPI_ADC is not set
 CONFIG_BFIN_SPORT=m
-# CONFIG_BFIN_TIMER_LATENCY is not set
 # CONFIG_BFIN_TWI_LCD is not set
-CONFIG_SIMPLE_GPIO=m
 CONFIG_VT=y
 CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
@@ -827,6 +867,7 @@ CONFIG_BFIN_JTAG_COMM=m
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
 CONFIG_SERIAL_BFIN_DMA=y
@@ -838,14 +879,10 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_BFIN_OTP=y
 # CONFIG_BFIN_OTP_WRITE_ENABLE is not set
-
-#
-# CAN, the car bus and industrial fieldbus
-#
-# CONFIG_CAN4LINUX is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
@@ -853,6 +890,7 @@ CONFIG_BFIN_OTP=y
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=m
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -886,14 +924,6 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_SENSORS_AD5252 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -910,13 +940,18 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_BFIN_LOCK is not set
 # CONFIG_SPI_BFIN_SPORT is not set
 # CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
 
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
@@ -932,6 +967,7 @@ CONFIG_GPIO_SYSFS=y
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
 # PCI GPIO expanders:
@@ -942,11 +978,15 @@ CONFIG_GPIO_SYSFS=y
 #
 # CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -973,28 +1013,21 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1030,15 +1063,18 @@ CONFIG_FB_BFIN_T350MCQB=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_LMS283GF05 is not set
 CONFIG_LCD_LTV350QV=m
 # CONFIG_LCD_ILI9320 is not set
 # CONFIG_LCD_TDO24M is not set
 # CONFIG_LCD_VGG2432A4 is not set
 # CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=m
-# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_GENERIC=m
+# CONFIG_BACKLIGHT_ADP8870 is not set
 
 #
 # Display device support
@@ -1066,6 +1102,7 @@ CONFIG_SOUND=m
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
+CONFIG_SND_JACK=y
 # CONFIG_SND_SEQUENCER is not set
 # CONFIG_SND_MIXER_OSS is not set
 # CONFIG_SND_PCM_OSS is not set
@@ -1074,6 +1111,11 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
@@ -1084,7 +1126,6 @@ CONFIG_SND_SPI=y
 #
 # ALSA Blackfin devices
 #
-# CONFIG_SND_BLACKFIN_AD1836 is not set
 # CONFIG_SND_BFIN_AD73322 is not set
 CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
@@ -1094,15 +1135,19 @@ CONFIG_SND_SOC_AC97_BUS=y
 CONFIG_SND_BF5XX_I2S=m
 CONFIG_SND_BF5XX_SOC_SSM2602=m
 # CONFIG_SND_BF5XX_SOC_AD73311 is not set
+# CONFIG_SND_BF5XX_SOC_ADAU1371 is not set
+# CONFIG_SND_BF5XX_SOC_ADAU1761 is not set
+# CONFIG_SND_BF5XX_TDM is not set
 CONFIG_SND_BF5XX_AC97=m
 CONFIG_SND_BF5XX_MMAP_SUPPORT=y
 # CONFIG_SND_BF5XX_MULTICHAN_SUPPORT is not set
+# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
+CONFIG_SND_BF5XX_SOC_AD1980=m
 CONFIG_SND_BF5XX_SOC_SPORT=m
 CONFIG_SND_BF5XX_SOC_I2S=m
 CONFIG_SND_BF5XX_SOC_AC97=m
-CONFIG_SND_BF5XX_SOC_AD1980=m
 CONFIG_SND_BF5XX_SPORT_NUM=0
-# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
+CONFIG_SND_SOC_I2C_AND_SPI=m
 # CONFIG_SND_SOC_ALL_CODECS is not set
 CONFIG_SND_SOC_AD1980=m
 CONFIG_SND_SOC_SSM2602=m
@@ -1110,7 +1155,6 @@ CONFIG_SND_SOC_SSM2602=m
 CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1123,30 +1167,35 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
@@ -1172,6 +1221,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_ISP1362_HCD is not set
@@ -1188,9 +1238,7 @@ CONFIG_USB_MUSB_HOST=y
 # CONFIG_USB_MUSB_PERIPHERAL is not set
 # CONFIG_USB_MUSB_OTG is not set
 CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
+CONFIG_MUSB_PIO_ONLY=y
 # CONFIG_USB_MUSB_DEBUG is not set
 
 #
@@ -1202,18 +1250,17 @@ CONFIG_USB_INVENTRA_DMA=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1249,7 +1296,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1261,6 +1307,13 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+CONFIG_NOP_USB_XCEIV=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1296,6 +1349,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1307,6 +1361,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -1327,10 +1382,21 @@ CONFIG_RTC_INTF_DEV=y
 #
 CONFIG_RTC_DRV_BFIN=y
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
+# Firmware Drivers
+#
+# CONFIG_FIRMWARE_MEMMAP is not set
+# CONFIG_SIGMA is not set
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=m
@@ -1340,9 +1406,13 @@ CONFIG_EXT2_FS=m
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1352,6 +1422,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 CONFIG_ISO9660_FS=m
@@ -1376,13 +1451,9 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1401,17 +1472,8 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
-CONFIG_YAFFS_FS=m
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1430,7 +1492,6 @@ CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1445,7 +1506,7 @@ CONFIG_SMB_FS=m
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
+CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
 # CONFIG_NLS_CODEPAGE_737 is not set
@@ -1495,14 +1556,19 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_SECTION_MISMATCH=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1510,31 +1576,39 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_NOMMU_REGIONS is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
-
-#
-# Tracers
-#
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_BRANCH_PROFILE_NONE is not set
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -1559,6 +1633,7 @@ CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
+# CONFIG_BFIN_ISRAM_SELF_TEST is not set
 
 #
 # Security options
@@ -1567,15 +1642,15 @@ CONFIG_ACCESS_CHECK=y
 CONFIG_SECURITY=y
 # CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_PATH is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_SECURITY_ROOTPLUG is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1607,11 +1682,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1648,6 +1725,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -1655,11 +1733,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1669,6 +1749,8 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig
index 50f9a23ccdbd..0b13d5836a48 100644
--- a/arch/blackfin/configs/BF533-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF533-EZKIT_defconfig
@@ -1,22 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.10
-# Thu May 21 05:50:01 2009
+# Linux kernel version: 2.6.32.2
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 CONFIG_BLACKFIN=y
+CONFIG_GENERIC_CSUM=y
+CONFIG_GENERIC_BUG=y
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -26,22 +31,41 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -62,6 +86,10 @@ CONFIG_EPOLL=y
 # CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
@@ -69,11 +97,15 @@ CONFIG_SLAB=y
 # CONFIG_SLOB is not set
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -81,11 +113,8 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -101,7 +130,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
@@ -132,15 +160,15 @@ CONFIG_BF533=y
 # CONFIG_BF537 is not set
 # CONFIG_BF538 is not set
 # CONFIG_BF539 is not set
-# CONFIG_BF542 is not set
+# CONFIG_BF542_std is not set
 # CONFIG_BF542M is not set
-# CONFIG_BF544 is not set
+# CONFIG_BF544_std is not set
 # CONFIG_BF544M is not set
-# CONFIG_BF547 is not set
+# CONFIG_BF547_std is not set
 # CONFIG_BF547M is not set
-# CONFIG_BF548 is not set
+# CONFIG_BF548_std is not set
 # CONFIG_BF548M is not set
-# CONFIG_BF549 is not set
+# CONFIG_BF549_std is not set
 # CONFIG_BF549M is not set
 # CONFIG_BF561 is not set
 CONFIG_BF_REV_MIN=3
@@ -228,7 +256,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_TICKSOURCE_GPTMR0 is not set
 CONFIG_TICKSOURCE_CORETMR=y
-# CONFIG_CYCLES_CLOCKSOURCE is not set
+CONFIG_CYCLES_CLOCKSOURCE=y
 # CONFIG_GPTMR0_CLOCKSOURCE is not set
 CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
@@ -280,7 +308,6 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
@@ -289,19 +316,18 @@ CONFIG_BFIN_GPTIMERS=m
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
+# CONFIG_DMA_UNCACHED_512K is not set
+# CONFIG_DMA_UNCACHED_256K is not set
+# CONFIG_DMA_UNCACHED_128K is not set
 # CONFIG_DMA_UNCACHED_NONE is not set
 
 #
 # Cache Support
 #
-#
-# Cache Support
-#
 CONFIG_BFIN_ICACHE=y
-# CONFIG_BFIN_ICACHE_LOCK is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
 CONFIG_BFIN_EXTMEM_DCACHEABLE=y
 CONFIG_BFIN_EXTMEM_WRITEBACK=y
 # CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
@@ -312,7 +338,7 @@ CONFIG_BFIN_EXTMEM_WRITEBACK=y
 # CONFIG_MPU is not set
 
 #
-# Asynchonous Memory Configuration
+# Asynchronous Memory Configuration
 #
 
 #
@@ -358,6 +384,7 @@ CONFIG_PM=y
 CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
+# CONFIG_PM_RUNTIME is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_PM_BFIN_SLEEP_DEEPER=y
 # CONFIG_PM_BFIN_SLEEP is not set
@@ -379,11 +406,6 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -407,7 +429,6 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
@@ -418,6 +439,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -431,7 +453,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -475,13 +500,8 @@ CONFIG_IRTTY_SIR=m
 #
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -502,6 +522,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
@@ -559,6 +580,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 #
 # CONFIG_MTD_DATAFLASH is not set
 # CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -574,6 +596,11 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -590,9 +617,14 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -616,9 +648,12 @@ CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_SMC91X=y
-# CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_ADF702X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -627,15 +662,16 @@ CONFIG_SMC91X=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
 
 #
-# Wireless LAN
+# Enable WiMAX (Networking options) to see the WiMAX drivers
 #
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -679,15 +715,12 @@ CONFIG_INPUT_EVDEV=m
 #
 # Character devices
 #
-# CONFIG_AD9960 is not set
 CONFIG_BFIN_DMA_INTERFACE=m
 # CONFIG_BFIN_PPI is not set
 # CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
 # CONFIG_BFIN_SPI_ADC is not set
 CONFIG_BFIN_SPORT=y
-# CONFIG_BFIN_TIMER_LATENCY is not set
-CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
 CONFIG_BFIN_JTAG_COMM=m
@@ -701,6 +734,7 @@ CONFIG_BFIN_JTAG_COMM=m
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
 CONFIG_SERIAL_BFIN_DMA=y
@@ -711,12 +745,8 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# CAN, the car bus and industrial fieldbus
-#
-# CONFIG_CAN4LINUX is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
@@ -734,13 +764,18 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_BFIN_LOCK is not set
 # CONFIG_SPI_BFIN_SPORT is not set
 # CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
 
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
@@ -753,9 +788,6 @@ CONFIG_GPIO_SYSFS=y
 #
 # I2C GPIO expanders:
 #
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 
 #
 # PCI GPIO expanders:
@@ -766,11 +798,15 @@ CONFIG_GPIO_SYSFS=y
 #
 # CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -793,23 +829,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -826,14 +849,12 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 # CONFIG_HID_PID is not set
 
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -864,6 +885,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -884,10 +906,20 @@ CONFIG_RTC_INTF_DEV=y
 #
 CONFIG_RTC_DRV_BFIN=y
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
+# Firmware Drivers
+#
+# CONFIG_FIRMWARE_MEMMAP is not set
+
+#
 # File systems
 #
 # CONFIG_EXT2_FS is not set
@@ -896,9 +928,13 @@ CONFIG_RTC_DRV_BFIN=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -908,6 +944,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -926,13 +967,9 @@ CONFIG_INOTIFY_USER=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -951,17 +988,8 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
-CONFIG_YAFFS_FS=m
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -980,7 +1008,6 @@ CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1045,14 +1072,19 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_SECTION_MISMATCH=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1060,31 +1092,39 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_NOMMU_REGIONS is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
-
-#
-# Tracers
-#
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_BRANCH_PROFILE_NONE is not set
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -1109,6 +1149,7 @@ CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
+# CONFIG_BFIN_ISRAM_SELF_TEST is not set
 
 #
 # Security options
@@ -1117,14 +1158,14 @@ CONFIG_ACCESS_CHECK=y
 CONFIG_SECURITY=y
 # CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_PATH is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1156,11 +1197,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1197,6 +1240,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -1204,11 +1248,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1218,6 +1264,8 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig
index 6c60c8286318..c3fe6e5b612f 100644
--- a/arch/blackfin/configs/BF533-STAMP_defconfig
+++ b/arch/blackfin/configs/BF533-STAMP_defconfig
@@ -1,22 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.10
-# Thu May 21 05:50:01 2009
+# Linux kernel version: 2.6.32.2
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 CONFIG_BLACKFIN=y
+CONFIG_GENERIC_CSUM=y
+CONFIG_GENERIC_BUG=y
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -26,22 +31,41 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -62,6 +86,10 @@ CONFIG_EPOLL=y
 # CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
@@ -69,11 +97,15 @@ CONFIG_SLAB=y
 # CONFIG_SLOB is not set
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -81,11 +113,8 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -101,7 +130,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
@@ -132,15 +160,15 @@ CONFIG_BF533=y
 # CONFIG_BF537 is not set
 # CONFIG_BF538 is not set
 # CONFIG_BF539 is not set
-# CONFIG_BF542 is not set
+# CONFIG_BF542_std is not set
 # CONFIG_BF542M is not set
-# CONFIG_BF544 is not set
+# CONFIG_BF544_std is not set
 # CONFIG_BF544M is not set
-# CONFIG_BF547 is not set
+# CONFIG_BF547_std is not set
 # CONFIG_BF547M is not set
-# CONFIG_BF548 is not set
+# CONFIG_BF548_std is not set
 # CONFIG_BF548M is not set
-# CONFIG_BF549 is not set
+# CONFIG_BF549_std is not set
 # CONFIG_BF549M is not set
 # CONFIG_BF561 is not set
 CONFIG_BF_REV_MIN=3
@@ -228,7 +256,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_TICKSOURCE_GPTMR0 is not set
 CONFIG_TICKSOURCE_CORETMR=y
-# CONFIG_CYCLES_CLOCKSOURCE is not set
+CONFIG_CYCLES_CLOCKSOURCE=y
 # CONFIG_GPTMR0_CLOCKSOURCE is not set
 CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
@@ -280,7 +308,6 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
@@ -289,16 +316,18 @@ CONFIG_BFIN_GPTIMERS=m
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
+# CONFIG_DMA_UNCACHED_512K is not set
+# CONFIG_DMA_UNCACHED_256K is not set
+# CONFIG_DMA_UNCACHED_128K is not set
 # CONFIG_DMA_UNCACHED_NONE is not set
 
 #
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
-# CONFIG_BFIN_ICACHE_LOCK is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
 CONFIG_BFIN_EXTMEM_DCACHEABLE=y
 CONFIG_BFIN_EXTMEM_WRITEBACK=y
 # CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
@@ -309,7 +338,7 @@ CONFIG_BFIN_EXTMEM_WRITEBACK=y
 # CONFIG_MPU is not set
 
 #
-# Asynchonous Memory Configuration
+# Asynchronous Memory Configuration
 #
 
 #
@@ -355,6 +384,7 @@ CONFIG_PM=y
 CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
+# CONFIG_PM_RUNTIME is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_PM_BFIN_SLEEP_DEEPER=y
 # CONFIG_PM_BFIN_SLEEP is not set
@@ -376,11 +406,6 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -404,7 +429,6 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
@@ -415,6 +439,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -428,7 +453,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -474,13 +502,8 @@ CONFIG_SIR_BFIN_DMA=y
 #
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -501,6 +524,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
@@ -560,6 +584,7 @@ CONFIG_MTD_BFIN_ASYNC=m
 #
 # CONFIG_MTD_DATAFLASH is not set
 # CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -575,6 +600,11 @@ CONFIG_MTD_BFIN_ASYNC=m
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -591,10 +621,20 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -618,9 +658,12 @@ CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_SMC91X=y
-# CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_ADF702X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -629,15 +672,16 @@ CONFIG_SMC91X=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
 
 #
-# Wireless LAN
+# Enable WiMAX (Networking options) to see the WiMAX drivers
 #
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -672,7 +716,10 @@ CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_UINPUT is not set
-CONFIG_CONFIG_INPUT_PCF8574=m
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+# CONFIG_INPUT_AD714X is not set
+# CONFIG_INPUT_ADXL34X is not set
+# CONFIG_INPUT_PCF8574 is not set
 
 #
 # Hardware I/O ports
@@ -683,16 +730,13 @@ CONFIG_CONFIG_INPUT_PCF8574=m
 #
 # Character devices
 #
-# CONFIG_AD9960 is not set
 CONFIG_BFIN_DMA_INTERFACE=m
 # CONFIG_BFIN_PPI is not set
 # CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
 # CONFIG_BFIN_SPI_ADC is not set
 CONFIG_BFIN_SPORT=m
-# CONFIG_BFIN_TIMER_LATENCY is not set
 # CONFIG_BFIN_TWI_LCD is not set
-CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
 CONFIG_BFIN_JTAG_COMM=m
@@ -706,6 +750,7 @@ CONFIG_BFIN_JTAG_COMM=m
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
 CONFIG_SERIAL_BFIN_DMA=y
@@ -716,12 +761,8 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# CAN, the car bus and industrial fieldbus
-#
-# CONFIG_CAN4LINUX is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
@@ -729,6 +770,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=m
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -759,14 +801,6 @@ CONFIG_I2C_HELPER_AUTO=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_SENSORS_AD5252 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -783,13 +817,18 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_BFIN_LOCK is not set
 # CONFIG_SPI_BFIN_SPORT is not set
 # CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
 
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
@@ -805,6 +844,7 @@ CONFIG_GPIO_SYSFS=y
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
 # PCI GPIO expanders:
@@ -815,11 +855,15 @@ CONFIG_GPIO_SYSFS=y
 #
 # CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -841,26 +885,18 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -904,6 +940,7 @@ CONFIG_ADV7393_1XMEM=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -913,19 +950,27 @@ CONFIG_ADV7393_1XMEM=y
 # CONFIG_LOGO is not set
 CONFIG_SOUND=m
 CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
+CONFIG_SND_JACK=y
 # CONFIG_SND_SEQUENCER is not set
 CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
 CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_HRTIMER is not set
 # CONFIG_SND_DYNAMIC_MINORS is not set
 CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
@@ -936,13 +981,6 @@ CONFIG_SND_SPI=y
 #
 # ALSA Blackfin devices
 #
-CONFIG_SND_BLACKFIN_AD1836=m
-CONFIG_SND_BLACKFIN_AD1836_TDM=y
-# CONFIG_SND_BLACKFIN_AD1836_I2S is not set
-CONFIG_SND_BLACKFIN_AD1836_MULSUB=y
-# CONFIG_SND_BLACKFIN_AD1836_5P1 is not set
-CONFIG_SND_BLACKFIN_SPORT=0
-CONFIG_SND_BLACKFIN_SPI_PFBIT=4
 CONFIG_SND_BFIN_SPORT=0
 CONFIG_SND_BFIN_AD73322=m
 CONFIG_SND_BFIN_AD73322_SPORT0_SE=10
@@ -953,16 +991,20 @@ CONFIG_SND_SOC_AC97_BUS=y
 CONFIG_SND_BF5XX_I2S=m
 # CONFIG_SND_BF5XX_SOC_SSM2602 is not set
 CONFIG_SND_BF5XX_SOC_AD73311=m
+# CONFIG_SND_BF5XX_SOC_ADAU1371 is not set
+# CONFIG_SND_BF5XX_SOC_ADAU1761 is not set
 CONFIG_SND_BFIN_AD73311_SE=4
+# CONFIG_SND_BF5XX_TDM is not set
 CONFIG_SND_BF5XX_AC97=m
 CONFIG_SND_BF5XX_MMAP_SUPPORT=y
 # CONFIG_SND_BF5XX_MULTICHAN_SUPPORT is not set
+# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
+CONFIG_SND_BF5XX_SOC_AD1980=m
 CONFIG_SND_BF5XX_SOC_SPORT=m
 CONFIG_SND_BF5XX_SOC_I2S=m
 CONFIG_SND_BF5XX_SOC_AC97=m
-CONFIG_SND_BF5XX_SOC_AD1980=m
 CONFIG_SND_BF5XX_SPORT_NUM=0
-# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
+CONFIG_SND_SOC_I2C_AND_SPI=m
 # CONFIG_SND_SOC_ALL_CODECS is not set
 CONFIG_SND_SOC_AD1980=m
 CONFIG_SND_SOC_AD73311=m
@@ -970,14 +1012,12 @@ CONFIG_SND_SOC_AD73311=m
 CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 # CONFIG_HID_PID is not set
 
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1014,6 +1054,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1025,6 +1066,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -1045,10 +1087,21 @@ CONFIG_RTC_INTF_DEV=y
 #
 CONFIG_RTC_DRV_BFIN=y
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
+# Firmware Drivers
+#
+# CONFIG_FIRMWARE_MEMMAP is not set
+# CONFIG_SIGMA is not set
+
+#
 # File systems
 #
 # CONFIG_EXT2_FS is not set
@@ -1057,9 +1110,13 @@ CONFIG_RTC_DRV_BFIN=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1069,6 +1126,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1087,13 +1149,9 @@ CONFIG_INOTIFY_USER=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1112,17 +1170,8 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
-CONFIG_YAFFS_FS=m
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1141,7 +1190,6 @@ CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1206,14 +1254,19 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_SECTION_MISMATCH=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1221,31 +1274,39 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_NOMMU_REGIONS is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
-
-#
-# Tracers
-#
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_BRANCH_PROFILE_NONE is not set
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -1270,6 +1331,7 @@ CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
+# CONFIG_BFIN_ISRAM_SELF_TEST is not set
 
 #
 # Security options
@@ -1278,14 +1340,14 @@ CONFIG_ACCESS_CHECK=y
 CONFIG_SECURITY=y
 # CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_PATH is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1317,11 +1379,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1358,6 +1422,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -1365,11 +1430,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1379,6 +1446,8 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig
index 2908595b67c5..7596cf7673f1 100644
--- a/arch/blackfin/configs/BF537-STAMP_defconfig
+++ b/arch/blackfin/configs/BF537-STAMP_defconfig
@@ -1,22 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.10
-# Thu May 21 05:50:01 2009
+# Linux kernel version: 2.6.32.2
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 CONFIG_BLACKFIN=y
+CONFIG_GENERIC_CSUM=y
+CONFIG_GENERIC_BUG=y
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -26,22 +31,41 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -62,6 +86,10 @@ CONFIG_EPOLL=y
 # CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
@@ -69,11 +97,15 @@ CONFIG_SLAB=y
 # CONFIG_SLOB is not set
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -81,11 +113,8 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -101,7 +130,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
@@ -132,15 +160,15 @@ CONFIG_FREEZER=y
 CONFIG_BF537=y
 # CONFIG_BF538 is not set
 # CONFIG_BF539 is not set
-# CONFIG_BF542 is not set
+# CONFIG_BF542_std is not set
 # CONFIG_BF542M is not set
-# CONFIG_BF544 is not set
+# CONFIG_BF544_std is not set
 # CONFIG_BF544M is not set
-# CONFIG_BF547 is not set
+# CONFIG_BF547_std is not set
 # CONFIG_BF547M is not set
-# CONFIG_BF548 is not set
+# CONFIG_BF548_std is not set
 # CONFIG_BF548M is not set
-# CONFIG_BF549 is not set
+# CONFIG_BF549_std is not set
 # CONFIG_BF549M is not set
 # CONFIG_BF561 is not set
 CONFIG_BF_REV_MIN=2
@@ -184,7 +212,8 @@ CONFIG_IRQ_MEM_DMA1=13
 CONFIG_IRQ_WATCH=13
 CONFIG_IRQ_SPI=10
 CONFIG_BFIN537_STAMP=y
-# CONFIG_BFIN537_BLUETECHNIX_CM is not set
+# CONFIG_BFIN537_BLUETECHNIX_CM_E is not set
+# CONFIG_BFIN537_BLUETECHNIX_CM_U is not set
 # CONFIG_BFIN537_BLUETECHNIX_TCM is not set
 # CONFIG_PNAV10 is not set
 # CONFIG_CAMSIG_MINOTAUR is not set
@@ -235,7 +264,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_TICKSOURCE_GPTMR0 is not set
 CONFIG_TICKSOURCE_CORETMR=y
-# CONFIG_CYCLES_CLOCKSOURCE is not set
+CONFIG_CYCLES_CLOCKSOURCE=y
 # CONFIG_GPTMR0_CLOCKSOURCE is not set
 CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
@@ -287,7 +316,6 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
@@ -296,16 +324,18 @@ CONFIG_BFIN_GPTIMERS=m
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
+# CONFIG_DMA_UNCACHED_512K is not set
+# CONFIG_DMA_UNCACHED_256K is not set
+# CONFIG_DMA_UNCACHED_128K is not set
 # CONFIG_DMA_UNCACHED_NONE is not set
 
 #
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
-# CONFIG_BFIN_ICACHE_LOCK is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
 CONFIG_BFIN_EXTMEM_DCACHEABLE=y
 CONFIG_BFIN_EXTMEM_WRITEBACK=y
 # CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
@@ -316,7 +346,7 @@ CONFIG_BFIN_EXTMEM_WRITEBACK=y
 # CONFIG_MPU is not set
 
 #
-# Asynchonous Memory Configuration
+# Asynchronous Memory Configuration
 #
 
 #
@@ -362,6 +392,7 @@ CONFIG_PM=y
 CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
+# CONFIG_PM_RUNTIME is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_PM_BFIN_SLEEP_DEEPER=y
 # CONFIG_PM_BFIN_SLEEP is not set
@@ -384,11 +415,6 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -412,7 +438,6 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
@@ -423,6 +448,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -436,14 +462,34 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+
+#
+# CAN Device Drivers
+#
+# CONFIG_CAN_VCAN is not set
+CONFIG_CAN_DEV=m
+# CONFIG_CAN_CALC_BITTIMING is not set
+CONFIG_CAN_BFIN=m
+# CONFIG_CAN_SJA1000 is not set
+
+#
+# CAN USB interfaces
+#
+# CONFIG_CAN_EMS_USB is not set
+# CONFIG_CAN_DEBUG_DEVICES is not set
 CONFIG_IRDA=m
 
 #
@@ -483,13 +529,8 @@ CONFIG_SIR_BFIN_DMA=y
 #
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -510,6 +551,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
@@ -568,6 +610,7 @@ CONFIG_MTD_PHYSMAP=m
 #
 # CONFIG_MTD_DATAFLASH is not set
 # CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -583,6 +626,11 @@ CONFIG_MTD_PHYSMAP=m
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -599,10 +647,20 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -637,6 +695,9 @@ CONFIG_SMSC_PHY=y
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -647,9 +708,12 @@ CONFIG_BFIN_TX_DESC_NUM=10
 CONFIG_BFIN_RX_DESC_NUM=20
 # CONFIG_BFIN_MAC_RMII is not set
 # CONFIG_SMC91X is not set
-# CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_ADF702X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -658,15 +722,16 @@ CONFIG_BFIN_RX_DESC_NUM=20
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
 
 #
-# Wireless LAN
+# Enable WiMAX (Networking options) to see the WiMAX drivers
 #
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -701,7 +766,10 @@ CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_UINPUT is not set
-CONFIG_CONFIG_INPUT_PCF8574=m
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+# CONFIG_INPUT_AD714X is not set
+# CONFIG_INPUT_ADXL34X is not set
+# CONFIG_INPUT_PCF8574 is not set
 
 #
 # Hardware I/O ports
@@ -712,16 +780,13 @@ CONFIG_CONFIG_INPUT_PCF8574=m
 #
 # Character devices
 #
-# CONFIG_AD9960 is not set
 CONFIG_BFIN_DMA_INTERFACE=m
 # CONFIG_BFIN_PPI is not set
 # CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
 # CONFIG_BFIN_SPI_ADC is not set
 CONFIG_BFIN_SPORT=m
-# CONFIG_BFIN_TIMER_LATENCY is not set
 # CONFIG_BFIN_TWI_LCD is not set
-CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
 CONFIG_BFIN_JTAG_COMM=m
@@ -735,6 +800,7 @@ CONFIG_BFIN_JTAG_COMM=m
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
 CONFIG_SERIAL_BFIN_DMA=y
@@ -746,17 +812,8 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# CAN, the car bus and industrial fieldbus
-#
-CONFIG_CAN4LINUX=y
-
-#
-# linux embedded drivers
-#
-CONFIG_CAN_BLACKFIN=m
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
@@ -764,6 +821,7 @@ CONFIG_CAN_BLACKFIN=m
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=m
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -796,14 +854,6 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_SENSORS_AD5252=m
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -820,13 +870,18 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_BFIN_LOCK is not set
 # CONFIG_SPI_BFIN_SPORT is not set
 # CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
 
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
@@ -842,6 +897,7 @@ CONFIG_GPIO_SYSFS=y
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
 # PCI GPIO expanders:
@@ -852,11 +908,15 @@ CONFIG_GPIO_SYSFS=y
 #
 # CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -878,26 +938,18 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -929,9 +981,6 @@ CONFIG_FB_CFB_IMAGEBLIT=m
 # CONFIG_FB_BFIN_T350MCQB is not set
 # CONFIG_FB_BFIN_LQ035Q1 is not set
 CONFIG_FB_BF537_LQ035=m
-CONFIG_LQ035_SLAVE_ADDR=0x58
-# CONFIG_FB_BFIN_LANDSCAPE is not set
-# CONFIG_FB_BFIN_BGR is not set
 CONFIG_FB_BFIN_7393=m
 CONFIG_NTSC=y
 # CONFIG_PAL is not set
@@ -946,15 +995,18 @@ CONFIG_ADV7393_1XMEM=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_LMS283GF05 is not set
 # CONFIG_LCD_LTV350QV is not set
 # CONFIG_LCD_ILI9320 is not set
 # CONFIG_LCD_TDO24M is not set
 # CONFIG_LCD_VGG2432A4 is not set
 # CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=m
-CONFIG_BACKLIGHT_CORGI=m
+CONFIG_BACKLIGHT_GENERIC=m
+# CONFIG_BACKLIGHT_ADP8870 is not set
 
 #
 # Display device support
@@ -963,19 +1015,27 @@ CONFIG_BACKLIGHT_CORGI=m
 # CONFIG_LOGO is not set
 CONFIG_SOUND=m
 CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
+CONFIG_SND_JACK=y
 # CONFIG_SND_SEQUENCER is not set
 CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
 CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_HRTIMER is not set
 # CONFIG_SND_DYNAMIC_MINORS is not set
 CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
@@ -986,13 +1046,6 @@ CONFIG_SND_SPI=y
 #
 # ALSA Blackfin devices
 #
-CONFIG_SND_BLACKFIN_AD1836=m
-CONFIG_SND_BLACKFIN_AD1836_TDM=y
-# CONFIG_SND_BLACKFIN_AD1836_I2S is not set
-CONFIG_SND_BLACKFIN_AD1836_MULSUB=y
-# CONFIG_SND_BLACKFIN_AD1836_5P1 is not set
-CONFIG_SND_BLACKFIN_SPORT=0
-CONFIG_SND_BLACKFIN_SPI_PFBIT=4
 CONFIG_SND_BFIN_SPORT=0
 CONFIG_SND_BFIN_AD73322=m
 CONFIG_SND_BFIN_AD73322_SPORT0_SE=10
@@ -1003,16 +1056,20 @@ CONFIG_SND_SOC_AC97_BUS=y
 CONFIG_SND_BF5XX_I2S=m
 # CONFIG_SND_BF5XX_SOC_SSM2602 is not set
 CONFIG_SND_BF5XX_SOC_AD73311=m
+# CONFIG_SND_BF5XX_SOC_ADAU1371 is not set
+# CONFIG_SND_BF5XX_SOC_ADAU1761 is not set
 CONFIG_SND_BFIN_AD73311_SE=4
+# CONFIG_SND_BF5XX_TDM is not set
 CONFIG_SND_BF5XX_AC97=m
 CONFIG_SND_BF5XX_MMAP_SUPPORT=y
 # CONFIG_SND_BF5XX_MULTICHAN_SUPPORT is not set
+# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
+CONFIG_SND_BF5XX_SOC_AD1980=m
 CONFIG_SND_BF5XX_SOC_SPORT=m
 CONFIG_SND_BF5XX_SOC_I2S=m
 CONFIG_SND_BF5XX_SOC_AC97=m
-CONFIG_SND_BF5XX_SOC_AD1980=m
 CONFIG_SND_BF5XX_SPORT_NUM=0
-# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
+CONFIG_SND_SOC_I2C_AND_SPI=m
 # CONFIG_SND_SOC_ALL_CODECS is not set
 CONFIG_SND_SOC_AD1980=m
 CONFIG_SND_SOC_AD73311=m
@@ -1020,14 +1077,12 @@ CONFIG_SND_SOC_AD73311=m
 CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 # CONFIG_HID_PID is not set
 
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1064,6 +1119,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1075,6 +1131,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -1095,10 +1152,21 @@ CONFIG_RTC_INTF_DEV=y
 #
 CONFIG_RTC_DRV_BFIN=y
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
+# Firmware Drivers
+#
+# CONFIG_FIRMWARE_MEMMAP is not set
+# CONFIG_SIGMA is not set
+
+#
 # File systems
 #
 # CONFIG_EXT2_FS is not set
@@ -1107,9 +1175,13 @@ CONFIG_RTC_DRV_BFIN=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1119,6 +1191,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1137,13 +1214,9 @@ CONFIG_INOTIFY_USER=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1162,17 +1235,8 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
-CONFIG_YAFFS_FS=m
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1191,7 +1255,6 @@ CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1256,14 +1319,19 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_SECTION_MISMATCH=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1271,31 +1339,39 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_NOMMU_REGIONS is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
-
-#
-# Tracers
-#
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_BRANCH_PROFILE_NONE is not set
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -1320,6 +1396,7 @@ CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
+# CONFIG_BFIN_ISRAM_SELF_TEST is not set
 
 #
 # Security options
@@ -1328,14 +1405,14 @@ CONFIG_ACCESS_CHECK=y
 CONFIG_SECURITY=y
 # CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_PATH is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1367,11 +1444,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1408,6 +1487,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -1415,11 +1495,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1429,6 +1511,8 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/BF538-EZKIT_defconfig b/arch/blackfin/configs/BF538-EZKIT_defconfig
index 09ea2499555e..bc1871d89fd5 100644
--- a/arch/blackfin/configs/BF538-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF538-EZKIT_defconfig
@@ -1,22 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.10
-# Thu May 21 05:50:01 2009
+# Linux kernel version: 2.6.32.2
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 CONFIG_BLACKFIN=y
+CONFIG_GENERIC_CSUM=y
+CONFIG_GENERIC_BUG=y
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -26,22 +31,41 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -62,6 +86,10 @@ CONFIG_EPOLL=y
 # CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
@@ -69,11 +97,15 @@ CONFIG_SLAB=y
 # CONFIG_SLOB is not set
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -81,11 +113,8 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -101,7 +130,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
@@ -132,15 +160,15 @@ CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_BF537 is not set
 CONFIG_BF538=y
 # CONFIG_BF539 is not set
-# CONFIG_BF542 is not set
+# CONFIG_BF542_std is not set
 # CONFIG_BF542M is not set
-# CONFIG_BF544 is not set
+# CONFIG_BF544_std is not set
 # CONFIG_BF544M is not set
-# CONFIG_BF547 is not set
+# CONFIG_BF547_std is not set
 # CONFIG_BF547M is not set
-# CONFIG_BF548 is not set
+# CONFIG_BF548_std is not set
 # CONFIG_BF548M is not set
-# CONFIG_BF549 is not set
+# CONFIG_BF549_std is not set
 # CONFIG_BF549M is not set
 # CONFIG_BF561 is not set
 CONFIG_BF_REV_MIN=4
@@ -246,7 +274,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_TICKSOURCE_GPTMR0 is not set
 CONFIG_TICKSOURCE_CORETMR=y
-# CONFIG_CYCLES_CLOCKSOURCE is not set
+CONFIG_CYCLES_CLOCKSOURCE=y
 # CONFIG_GPTMR0_CLOCKSOURCE is not set
 CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
@@ -298,7 +326,6 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
@@ -307,16 +334,18 @@ CONFIG_BFIN_GPTIMERS=m
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
+# CONFIG_DMA_UNCACHED_512K is not set
+# CONFIG_DMA_UNCACHED_256K is not set
+# CONFIG_DMA_UNCACHED_128K is not set
 # CONFIG_DMA_UNCACHED_NONE is not set
 
 #
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
-# CONFIG_BFIN_ICACHE_LOCK is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
 CONFIG_BFIN_EXTMEM_DCACHEABLE=y
 CONFIG_BFIN_EXTMEM_WRITEBACK=y
 # CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
@@ -327,7 +356,7 @@ CONFIG_BFIN_EXTMEM_WRITEBACK=y
 # CONFIG_MPU is not set
 
 #
-# Asynchonous Memory Configuration
+# Asynchronous Memory Configuration
 #
 
 #
@@ -383,11 +412,6 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -411,7 +435,6 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
@@ -422,6 +445,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -435,14 +459,34 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+
+#
+# CAN Device Drivers
+#
+# CONFIG_CAN_VCAN is not set
+CONFIG_CAN_DEV=m
+# CONFIG_CAN_CALC_BITTIMING is not set
+CONFIG_CAN_BFIN=m
+# CONFIG_CAN_SJA1000 is not set
+
+#
+# CAN USB interfaces
+#
+# CONFIG_CAN_EMS_USB is not set
+# CONFIG_CAN_DEBUG_DEVICES is not set
 CONFIG_IRDA=m
 
 #
@@ -481,13 +525,8 @@ CONFIG_SIR_BFIN_DMA=y
 #
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -508,6 +547,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
@@ -566,6 +606,7 @@ CONFIG_MTD_PHYSMAP=m
 #
 # CONFIG_MTD_DATAFLASH is not set
 # CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -581,11 +622,6 @@ CONFIG_MTD_NAND=m
 # CONFIG_MTD_NAND_VERIFY_WRITE is not set
 # CONFIG_MTD_NAND_ECC_SMC is not set
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_BFIN=m
-CONFIG_BFIN_NAND_BASE=0x20212000
-CONFIG_BFIN_NAND_CLE=2
-CONFIG_BFIN_NAND_ALE=1
-CONFIG_BFIN_NAND_READY=3
 CONFIG_MTD_NAND_IDS=m
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
@@ -593,6 +629,11 @@ CONFIG_MTD_NAND_IDS=m
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -643,14 +684,20 @@ CONFIG_SMSC_PHY=y
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_SMC91X=y
-# CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_ADF702X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -659,15 +706,16 @@ CONFIG_SMC91X=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
 
 #
-# Wireless LAN
+# Enable WiMAX (Networking options) to see the WiMAX drivers
 #
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -700,14 +748,17 @@ CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
 # CONFIG_TOUCHSCREEN_AD7877 is not set
 # CONFIG_TOUCHSCREEN_AD7879_I2C is not set
 CONFIG_TOUCHSCREEN_AD7879_SPI=y
 CONFIG_TOUCHSCREEN_AD7879=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
 # CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
@@ -715,9 +766,13 @@ CONFIG_TOUCHSCREEN_AD7879=y
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
 CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_UINPUT is not set
-# CONFIG_CONFIG_INPUT_PCF8574 is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+# CONFIG_INPUT_AD714X is not set
+# CONFIG_INPUT_ADXL34X is not set
+# CONFIG_INPUT_PCF8574 is not set
 
 #
 # Hardware I/O ports
@@ -728,16 +783,13 @@ CONFIG_INPUT_MISC=y
 #
 # Character devices
 #
-# CONFIG_AD9960 is not set
 CONFIG_BFIN_DMA_INTERFACE=m
 # CONFIG_BFIN_PPI is not set
 # CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
 # CONFIG_BFIN_SPI_ADC is not set
 CONFIG_BFIN_SPORT=m
-# CONFIG_BFIN_TIMER_LATENCY is not set
 # CONFIG_BFIN_TWI_LCD is not set
-CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
 CONFIG_BFIN_JTAG_COMM=m
@@ -751,6 +803,7 @@ CONFIG_BFIN_JTAG_COMM=m
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
 CONFIG_SERIAL_BFIN_DMA=y
@@ -765,12 +818,8 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# CAN, the car bus and industrial fieldbus
-#
-# CONFIG_CAN4LINUX is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
@@ -778,6 +827,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 # CONFIG_I2C_CHARDEV is not set
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -810,14 +860,6 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_SENSORS_AD5252 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -834,13 +876,18 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_BFIN_LOCK is not set
 # CONFIG_SPI_BFIN_SPORT is not set
 # CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
 
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
@@ -856,6 +903,7 @@ CONFIG_GPIO_SYSFS=y
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
 # PCI GPIO expanders:
@@ -866,11 +914,15 @@ CONFIG_GPIO_SYSFS=y
 #
 # CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -892,26 +944,17 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -947,6 +990,7 @@ CONFIG_FB_BFIN_LQ035Q1=m
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -957,14 +1001,12 @@ CONFIG_FB_BFIN_LQ035Q1=m
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 # CONFIG_HID_PID is not set
 
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1001,6 +1043,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1012,6 +1055,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -1032,10 +1076,21 @@ CONFIG_RTC_INTF_DEV=y
 #
 CONFIG_RTC_DRV_BFIN=y
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
+# Firmware Drivers
+#
+# CONFIG_FIRMWARE_MEMMAP is not set
+# CONFIG_SIGMA is not set
+
+#
 # File systems
 #
 # CONFIG_EXT2_FS is not set
@@ -1044,9 +1099,13 @@ CONFIG_RTC_DRV_BFIN=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1056,6 +1115,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1074,13 +1138,9 @@ CONFIG_INOTIFY_USER=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1099,17 +1159,8 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
-CONFIG_YAFFS_FS=m
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1128,7 +1179,6 @@ CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1193,14 +1243,19 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_SECTION_MISMATCH=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1208,31 +1263,39 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_NOMMU_REGIONS is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
-
-#
-# Tracers
-#
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_BRANCH_PROFILE_NONE is not set
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -1257,6 +1320,7 @@ CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
+# CONFIG_BFIN_ISRAM_SELF_TEST is not set
 
 #
 # Security options
@@ -1265,14 +1329,14 @@ CONFIG_ACCESS_CHECK=y
 CONFIG_SECURITY=y
 # CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_PATH is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1304,11 +1368,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1345,6 +1411,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -1352,11 +1419,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1366,6 +1435,8 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig
index eb3e98b6f3f0..ca309cfc6ac4 100644
--- a/arch/blackfin/configs/BF548-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF548-EZKIT_defconfig
@@ -1,7 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31.5
-# Mon Nov  2 22:02:56 2009
+# Linux kernel version: 2.6.32.2
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -12,7 +11,6 @@ CONFIG_GENERIC_CSUM=y
 CONFIG_GENERIC_BUG=y
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
@@ -49,11 +47,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -89,24 +88,23 @@ CONFIG_EPOLL=y
 # CONFIG_AIO is not set
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 
 #
 # GCOV-based kernel profiling
 #
 # CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
+CONFIG_SLOW_WORK=y
+# CONFIG_SLOW_WORK_DEBUG is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_BASE_SMALL=0
@@ -163,15 +161,15 @@ CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_BF537 is not set
 # CONFIG_BF538 is not set
 # CONFIG_BF539 is not set
-# CONFIG_BF542 is not set
+# CONFIG_BF542_std is not set
 # CONFIG_BF542M is not set
-# CONFIG_BF544 is not set
+# CONFIG_BF544_std is not set
 # CONFIG_BF544M is not set
-# CONFIG_BF547 is not set
+# CONFIG_BF547_std is not set
 # CONFIG_BF547M is not set
 CONFIG_BF548_std=y
 # CONFIG_BF548M is not set
-# CONFIG_BF549 is not set
+# CONFIG_BF549_std is not set
 # CONFIG_BF549M is not set
 # CONFIG_BF561 is not set
 CONFIG_BF_REV_MIN=0
@@ -185,7 +183,6 @@ CONFIG_BF_REV_0_2=y
 # CONFIG_BF_REV_0_6 is not set
 # CONFIG_BF_REV_ANY is not set
 # CONFIG_BF_REV_NONE is not set
-CONFIG_BF54x=y
 CONFIG_IRQ_PLL_WAKEUP=7
 CONFIG_IRQ_RTC=8
 CONFIG_IRQ_SPORT0_RX=9
@@ -221,6 +218,8 @@ CONFIG_IRQ_SPI1=10
 CONFIG_IRQ_SPI2=10
 CONFIG_IRQ_TWI0=11
 CONFIG_IRQ_TWI1=11
+CONFIG_BF548=y
+CONFIG_BF54x=y
 CONFIG_BFIN548_EZKIT=y
 # CONFIG_BFIN548_BLUETECHNIX_CM is not set
 
@@ -387,12 +386,14 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 CONFIG_BFIN_GPTIMERS=m
 # CONFIG_DMA_UNCACHED_4M is not set
 CONFIG_DMA_UNCACHED_2M=y
 # CONFIG_DMA_UNCACHED_1M is not set
+# CONFIG_DMA_UNCACHED_512K is not set
+# CONFIG_DMA_UNCACHED_256K is not set
+# CONFIG_DMA_UNCACHED_128K is not set
 # CONFIG_DMA_UNCACHED_NONE is not set
 
 #
@@ -505,6 +506,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -528,7 +530,24 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+
+#
+# CAN Device Drivers
+#
+# CONFIG_CAN_VCAN is not set
+CONFIG_CAN_DEV=m
+# CONFIG_CAN_CALC_BITTIMING is not set
+CONFIG_CAN_BFIN=m
+# CONFIG_CAN_SJA1000 is not set
+
+#
+# CAN USB interfaces
+#
+# CONFIG_CAN_EMS_USB is not set
+# CONFIG_CAN_DEBUG_DEVICES is not set
 CONFIG_IRDA=m
 
 #
@@ -663,6 +682,7 @@ CONFIG_MTD_PHYSMAP=y
 # CONFIG_MTD_DATAFLASH is not set
 CONFIG_MTD_M25P80=y
 CONFIG_M25PXX_USE_FAST_READ=y
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -711,10 +731,10 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_ISL29003 is not set
-# CONFIG_AD525X_DPOT is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -767,7 +787,8 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
-CONFIG_SATA_PMP=y
+CONFIG_ATA_VERBOSE_ERROR=y
+# CONFIG_SATA_PMP is not set
 CONFIG_ATA_SFF=y
 # CONFIG_SATA_MV is not set
 # CONFIG_PATA_PLATFORM is not set
@@ -808,6 +829,7 @@ CONFIG_MII=y
 # CONFIG_ETHOC is not set
 CONFIG_SMSC911X=y
 # CONFIG_DNET is not set
+# CONFIG_ADF702X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -818,12 +840,10 @@ CONFIG_SMSC911X=y
 # CONFIG_B44 is not set
 # CONFIG_KS8842 is not set
 # CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 CONFIG_WLAN_80211=y
 CONFIG_LIBERTAS=m
@@ -877,10 +897,12 @@ CONFIG_INPUT_EVBUG=m
 CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_QT2160 is not set
 CONFIG_KEYBOARD_BFIN=y
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
@@ -900,6 +922,7 @@ CONFIG_TOUCHSCREEN_AD7877=m
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
 # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
 # CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
@@ -910,7 +933,6 @@ CONFIG_TOUCHSCREEN_AD7877=m
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 # CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
 CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_ATI_REMOTE is not set
 # CONFIG_INPUT_ATI_REMOTE2 is not set
@@ -976,11 +998,6 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_BFIN_OTP=y
 # CONFIG_BFIN_OTP_WRITE_ENABLE is not set
-
-#
-# CAN, the car bus and industrial fieldbus
-#
-# CONFIG_CAN4LINUX is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
@@ -988,6 +1005,7 @@ CONFIG_BFIN_OTP=y
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -1021,9 +1039,6 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -1078,11 +1093,15 @@ CONFIG_GPIO_SYSFS=y
 #
 # CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -1116,8 +1135,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
@@ -1192,6 +1213,7 @@ CONFIG_LOGO=y
 CONFIG_LOGO_BLACKFIN_CLUT224=y
 CONFIG_SOUND=y
 CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
@@ -1245,7 +1267,6 @@ CONFIG_SND_SOC_AD1980=y
 CONFIG_AC97_BUS=y
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1268,6 +1289,7 @@ CONFIG_HID_CYPRESS=y
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
 # CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
@@ -1422,10 +1444,11 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_SPI is not set
 CONFIG_SDH_BFIN=y
 # CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND is not set
-# CONFIG_SDH_BFIN_ENABLE_SDIO_IRQ is not set
-# CONFIG_MMC_SPI is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
@@ -1472,6 +1495,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -1522,6 +1546,7 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -1563,7 +1588,6 @@ CONFIG_NTFS_RW=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
 CONFIG_MISC_FILESYSTEMS=y
@@ -1595,7 +1619,6 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
@@ -1680,6 +1703,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1714,12 +1738,14 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
@@ -1730,7 +1756,6 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_VERBOSE=y
@@ -1766,7 +1791,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1798,11 +1822,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/blackfin/configs/BF561-ACVILON_defconfig b/arch/blackfin/configs/BF561-ACVILON_defconfig
index b9b0f93d0bd3..6a776ce75e9c 100644
--- a/arch/blackfin/configs/BF561-ACVILON_defconfig
+++ b/arch/blackfin/configs/BF561-ACVILON_defconfig
@@ -114,7 +114,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBDAF=y
+# CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -1486,19 +1486,10 @@ CONFIG_DEBUG_INFO=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_FTRACE is not set
+# CONFIG_BRANCH_PROFILE_NONE is not set
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
 # CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig
index e3ecdcc3e76b..792ff0938835 100644
--- a/arch/blackfin/configs/BF561-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF561-EZKIT_defconfig
@@ -1,7 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31.5
-# Mon Nov  2 21:59:31 2009
+# Linux kernel version: 2.6.32.2
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -12,7 +11,6 @@ CONFIG_GENERIC_CSUM=y
 CONFIG_GENERIC_BUG=y
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
@@ -49,11 +47,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -89,17 +88,15 @@ CONFIG_EPOLL=y
 # CONFIG_AIO is not set
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 
 #
@@ -163,15 +160,15 @@ CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_BF537 is not set
 # CONFIG_BF538 is not set
 # CONFIG_BF539 is not set
-# CONFIG_BF542 is not set
+# CONFIG_BF542_std is not set
 # CONFIG_BF542M is not set
-# CONFIG_BF544 is not set
+# CONFIG_BF544_std is not set
 # CONFIG_BF544M is not set
-# CONFIG_BF547 is not set
+# CONFIG_BF547_std is not set
 # CONFIG_BF547M is not set
-# CONFIG_BF548 is not set
+# CONFIG_BF548_std is not set
 # CONFIG_BF548M is not set
-# CONFIG_BF549 is not set
+# CONFIG_BF549_std is not set
 # CONFIG_BF549M is not set
 CONFIG_BF561=y
 # CONFIG_SMP is not set
@@ -180,9 +177,9 @@ CONFIG_BF_REV_MAX=5
 # CONFIG_BF_REV_0_0 is not set
 # CONFIG_BF_REV_0_1 is not set
 # CONFIG_BF_REV_0_2 is not set
-# CONFIG_BF_REV_0_3 is not set
+CONFIG_BF_REV_0_3=y
 # CONFIG_BF_REV_0_4 is not set
-CONFIG_BF_REV_0_5=y
+# CONFIG_BF_REV_0_5 is not set
 # CONFIG_BF_REV_0_6 is not set
 # CONFIG_BF_REV_ANY is not set
 # CONFIG_BF_REV_NONE is not set
@@ -298,7 +295,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_TICKSOURCE_GPTMR0 is not set
 CONFIG_TICKSOURCE_CORETMR=y
-# CONFIG_CYCLES_CLOCKSOURCE is not set
+CONFIG_CYCLES_CLOCKSOURCE=y
 # CONFIG_GPTMR0_CLOCKSOURCE is not set
 CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
@@ -353,12 +350,14 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 CONFIG_BFIN_GPTIMERS=m
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
+# CONFIG_DMA_UNCACHED_512K is not set
+# CONFIG_DMA_UNCACHED_256K is not set
+# CONFIG_DMA_UNCACHED_128K is not set
 # CONFIG_DMA_UNCACHED_NONE is not set
 
 #
@@ -370,9 +369,11 @@ CONFIG_BFIN_EXTMEM_ICACHEABLE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-CONFIG_BFIN_EXTMEM_WRITEBACK=y
-# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
-# CONFIG_BFIN_L2_DCACHEABLE is not set
+# CONFIG_BFIN_EXTMEM_WRITEBACK is not set
+CONFIG_BFIN_EXTMEM_WRITETHROUGH=y
+CONFIG_BFIN_L2_DCACHEABLE=y
+# CONFIG_BFIN_L2_WRITEBACK is not set
+CONFIG_BFIN_L2_WRITETHROUGH=y
 
 #
 # Memory Protection Unit
@@ -472,6 +473,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -613,6 +615,7 @@ CONFIG_MTD_PHYSMAP=m
 #
 # CONFIG_MTD_DATAFLASH is not set
 # CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -685,6 +688,7 @@ CONFIG_SMC91X=y
 # CONFIG_ETHOC is not set
 # CONFIG_SMSC911X is not set
 # CONFIG_DNET is not set
+# CONFIG_ADF702X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -695,14 +699,10 @@ CONFIG_SMC91X=y
 # CONFIG_B44 is not set
 # CONFIG_KS8842 is not set
 # CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_WLAN is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -782,11 +782,6 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# CAN, the car bus and industrial fieldbus
-#
-# CONFIG_CAN4LINUX is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
@@ -838,11 +833,15 @@ CONFIG_GPIO_SYSFS=y
 #
 # CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -865,6 +864,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_MC13783 is not set
 # CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
@@ -884,7 +884,6 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 # CONFIG_HID_PID is not set
 
@@ -923,6 +922,7 @@ CONFIG_HID=m
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -957,7 +957,6 @@ CONFIG_INOTIFY_USER=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
 CONFIG_MISC_FILESYSTEMS=y
@@ -989,7 +988,6 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
@@ -1064,6 +1062,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1098,26 +1097,24 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_BRANCH_PROFILE_NONE is not set
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_VERBOSE=y
@@ -1153,7 +1150,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1185,11 +1181,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/blackfin/configs/H8606_defconfig b/arch/blackfin/configs/H8606_defconfig
index bc7fae3d8b83..ed0a7ebeb85c 100644
--- a/arch/blackfin/configs/H8606_defconfig
+++ b/arch/blackfin/configs/H8606_defconfig
@@ -834,13 +834,6 @@ CONFIG_SND_VERBOSE_PROCFS=y
 #
 # ALSA Blackfin devices
 #
-CONFIG_SND_BLACKFIN_AD1836=m
-CONFIG_SND_BLACKFIN_AD1836_TDM=y
-# CONFIG_SND_BLACKFIN_AD1836_I2S is not set
-CONFIG_SND_BLACKFIN_AD1836_MULSUB=y
-# CONFIG_SND_BLACKFIN_AD1836_5P1 is not set
-CONFIG_SND_BLACKFIN_SPORT=0
-CONFIG_SND_BLACKFIN_SPI_PFBIT=4
 # CONFIG_SND_BFIN_AD73311 is not set
 
 #
diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig
index 67d12768602a..ad58fede1f41 100644
--- a/arch/blackfin/configs/PNAV-10_defconfig
+++ b/arch/blackfin/configs/PNAV-10_defconfig
@@ -1,21 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.10
+# Linux kernel version: 2.6.32.2
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 CONFIG_BLACKFIN=y
+CONFIG_GENERIC_CSUM=y
+CONFIG_GENERIC_BUG=y
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -25,16 +31,32 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
@@ -58,6 +80,10 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 # CONFIG_AIO is not set
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
@@ -65,11 +91,14 @@ CONFIG_SLAB=y
 # CONFIG_SLOB is not set
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -77,11 +106,8 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -97,7 +123,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
@@ -128,15 +153,15 @@ CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_BF537=y
 # CONFIG_BF538 is not set
 # CONFIG_BF539 is not set
-# CONFIG_BF542 is not set
+# CONFIG_BF542_std is not set
 # CONFIG_BF542M is not set
-# CONFIG_BF544 is not set
+# CONFIG_BF544_std is not set
 # CONFIG_BF544M is not set
-# CONFIG_BF547 is not set
+# CONFIG_BF547_std is not set
 # CONFIG_BF547M is not set
-# CONFIG_BF548 is not set
+# CONFIG_BF548_std is not set
 # CONFIG_BF548M is not set
-# CONFIG_BF549 is not set
+# CONFIG_BF549_std is not set
 # CONFIG_BF549M is not set
 # CONFIG_BF561 is not set
 CONFIG_BF_REV_MIN=2
@@ -180,7 +205,8 @@ CONFIG_IRQ_MEM_DMA1=13
 CONFIG_IRQ_WATCH=13
 CONFIG_IRQ_SPI=10
 # CONFIG_BFIN537_STAMP is not set
-# CONFIG_BFIN537_BLUETECHNIX_CM is not set
+# CONFIG_BFIN537_BLUETECHNIX_CM_E is not set
+# CONFIG_BFIN537_BLUETECHNIX_CM_U is not set
 # CONFIG_BFIN537_BLUETECHNIX_TCM is not set
 CONFIG_PNAV10=y
 # CONFIG_CAMSIG_MINOTAUR is not set
@@ -282,7 +308,6 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
@@ -291,16 +316,18 @@ CONFIG_BFIN_GPTIMERS=y
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
+# CONFIG_DMA_UNCACHED_512K is not set
+# CONFIG_DMA_UNCACHED_256K is not set
+# CONFIG_DMA_UNCACHED_128K is not set
 # CONFIG_DMA_UNCACHED_NONE is not set
 
 #
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
-# CONFIG_BFIN_ICACHE_LOCK is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
 CONFIG_BFIN_EXTMEM_DCACHEABLE=y
 CONFIG_BFIN_EXTMEM_WRITEBACK=y
 # CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
@@ -311,7 +338,7 @@ CONFIG_BFIN_EXTMEM_WRITEBACK=y
 # CONFIG_MPU is not set
 
 #
-# Asynchonous Memory Configuration
+# Asynchronous Memory Configuration
 #
 
 #
@@ -367,11 +394,6 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -395,7 +417,6 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
@@ -406,6 +427,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -419,7 +441,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -430,13 +455,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -455,6 +475,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
@@ -506,6 +527,7 @@ CONFIG_MTD_UCLINUX=y
 #
 # CONFIG_MTD_DATAFLASH is not set
 # CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -521,11 +543,6 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_VERIFY_WRITE is not set
 # CONFIG_MTD_NAND_ECC_SMC is not set
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_BFIN=y
-CONFIG_BFIN_NAND_BASE=0x20100000
-CONFIG_BFIN_NAND_CLE=2
-CONFIG_BFIN_NAND_ALE=1
-CONFIG_BFIN_NAND_READY=44
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
@@ -533,6 +550,11 @@ CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -549,10 +571,20 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -587,6 +619,9 @@ CONFIG_PHYLIB=y
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -597,9 +632,12 @@ CONFIG_BFIN_TX_DESC_NUM=100
 CONFIG_BFIN_RX_DESC_NUM=100
 CONFIG_BFIN_MAC_RMII=y
 # CONFIG_SMC91X is not set
-# CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_ADF702X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -608,15 +646,16 @@ CONFIG_BFIN_MAC_RMII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
 
 #
-# Wireless LAN
+# Enable WiMAX (Networking options) to see the WiMAX drivers
 #
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -649,14 +688,17 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
 CONFIG_TOUCHSCREEN_AD7877=y
 # CONFIG_TOUCHSCREEN_AD7879_I2C is not set
 # CONFIG_TOUCHSCREEN_AD7879_SPI is not set
 # CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
 # CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
@@ -665,6 +707,7 @@ CONFIG_TOUCHSCREEN_AD7877=y
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
 CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_ATI_REMOTE is not set
 # CONFIG_INPUT_ATI_REMOTE2 is not set
@@ -673,7 +716,9 @@ CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_YEALINK is not set
 # CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_UINPUT=y
-# CONFIG_CONFIG_INPUT_PCF8574 is not set
+# CONFIG_INPUT_AD714X is not set
+# CONFIG_INPUT_ADXL34X is not set
+# CONFIG_INPUT_PCF8574 is not set
 
 #
 # Hardware I/O ports
@@ -684,16 +729,13 @@ CONFIG_INPUT_UINPUT=y
 #
 # Character devices
 #
-# CONFIG_AD9960 is not set
 CONFIG_BFIN_DMA_INTERFACE=m
 # CONFIG_BFIN_PPI is not set
 # CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
 # CONFIG_BFIN_SPI_ADC is not set
 CONFIG_BFIN_SPORT=y
-# CONFIG_BFIN_TIMER_LATENCY is not set
 # CONFIG_BFIN_TWI_LCD is not set
-# CONFIG_SIMPLE_GPIO is not set
 # CONFIG_VT is not set
 CONFIG_DEVKMEM=y
 # CONFIG_BFIN_JTAG_COMM is not set
@@ -707,6 +749,7 @@ CONFIG_DEVKMEM=y
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
 CONFIG_SERIAL_BFIN_DMA=y
@@ -719,24 +762,17 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# CAN, the car bus and industrial fieldbus
-#
-CONFIG_CAN4LINUX=y
-
-#
-# linux embedded drivers
-#
-CONFIG_CAN_BLACKFIN=m
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -769,14 +805,6 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_SENSORS_AD5252 is not set
-# CONFIG_EEPROM_LEGACY is not set
-CONFIG_SENSORS_PCF8574=m
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -792,20 +820,29 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_BFIN_LOCK is not set
 # CONFIG_SPI_BFIN_SPORT is not set
 # CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
 
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD5252 is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADCXX is not set
@@ -818,11 +855,13 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -838,17 +877,24 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1111 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
@@ -858,9 +904,8 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -875,28 +920,19 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -928,24 +964,24 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_BFIN_T350MCQB is not set
 # CONFIG_FB_BFIN_LQ035Q1 is not set
 CONFIG_FB_BF537_LQ035=y
-CONFIG_LQ035_SLAVE_ADDR=0x58
-CONFIG_FB_BFIN_LANDSCAPE=y
-# CONFIG_FB_BFIN_BGR is not set
 # CONFIG_FB_BFIN_7393 is not set
 # CONFIG_FB_HITACHI_TX09 is not set
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_LMS283GF05 is not set
 # CONFIG_LCD_LTV350QV is not set
 # CONFIG_LCD_ILI9320 is not set
 # CONFIG_LCD_TDO24M is not set
 # CONFIG_LCD_VGG2432A4 is not set
 # CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_GENERIC=y
+# CONFIG_BACKLIGHT_ADP8870 is not set
 
 #
 # Display device support
@@ -954,6 +990,7 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_LOGO is not set
 CONFIG_SOUND=y
 CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=m
 # CONFIG_SND_SEQUENCER is not set
 # CONFIG_SND_MIXER_OSS is not set
@@ -963,6 +1000,11 @@ CONFIG_SND=m
 # CONFIG_SND_VERBOSE_PROCFS is not set
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
@@ -973,7 +1015,6 @@ CONFIG_SND_SPI=y
 #
 # ALSA Blackfin devices
 #
-# CONFIG_SND_BLACKFIN_AD1836 is not set
 # CONFIG_SND_BFIN_AD73322 is not set
 # CONFIG_SND_SOC is not set
 CONFIG_SOUND_PRIME=y
@@ -993,9 +1034,13 @@ CONFIG_USB_ARCH_HAS_HCD=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1031,6 +1076,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1042,6 +1088,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -1062,10 +1109,21 @@ CONFIG_RTC_INTF_DEV=y
 #
 CONFIG_RTC_DRV_BFIN=y
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
+# Firmware Drivers
+#
+# CONFIG_FIRMWARE_MEMMAP is not set
+# CONFIG_SIGMA is not set
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -1078,9 +1136,13 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1090,6 +1152,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1108,13 +1175,9 @@ CONFIG_INOTIFY_USER=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1123,17 +1186,8 @@ CONFIG_SYSFS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
-CONFIG_YAFFS_FS=y
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1152,7 +1206,6 @@ CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1217,18 +1270,19 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_SECTION_MISMATCH=y
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_DEBUG_VERBOSE=y
@@ -1245,6 +1299,7 @@ CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
 # CONFIG_EARLY_PRINTK is not set
 # CONFIG_CPLB_INFO is not set
 # CONFIG_ACCESS_CHECK is not set
+# CONFIG_BFIN_ISRAM_SELF_TEST is not set
 
 #
 # Security options
@@ -1253,14 +1308,14 @@ CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
 CONFIG_SECURITY=y
 # CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_PATH is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1292,11 +1347,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1333,6 +1390,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -1340,11 +1398,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1356,3 +1416,4 @@ CONFIG_ZLIB_INFLATE=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/TCM-BF518_defconfig b/arch/blackfin/configs/TCM-BF518_defconfig
new file mode 100644
index 000000000000..4d31e2a4ed46
--- /dev/null
+++ b/arch/blackfin/configs/TCM-BF518_defconfig
@@ -0,0 +1,1375 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32.3
+#
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_BLACKFIN=y
+CONFIG_GENERIC_CSUM=y
+CONFIG_GENERIC_BUG=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_RD_GZIP is not set
+# CONFIG_RD_BZIP2 is not set
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+CONFIG_EPOLL=y
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+# CONFIG_FREEZER is not set
+
+#
+# Blackfin Processor Options
+#
+
+#
+# Processor and Board Settings
+#
+# CONFIG_BF512 is not set
+# CONFIG_BF514 is not set
+# CONFIG_BF516 is not set
+CONFIG_BF518=y
+# CONFIG_BF522 is not set
+# CONFIG_BF523 is not set
+# CONFIG_BF524 is not set
+# CONFIG_BF525 is not set
+# CONFIG_BF526 is not set
+# CONFIG_BF527 is not set
+# CONFIG_BF531 is not set
+# CONFIG_BF532 is not set
+# CONFIG_BF533 is not set
+# CONFIG_BF534 is not set
+# CONFIG_BF536 is not set
+# CONFIG_BF537 is not set
+# CONFIG_BF538 is not set
+# CONFIG_BF539 is not set
+# CONFIG_BF542_std is not set
+# CONFIG_BF542M is not set
+# CONFIG_BF544_std is not set
+# CONFIG_BF544M is not set
+# CONFIG_BF547_std is not set
+# CONFIG_BF547M is not set
+# CONFIG_BF548_std is not set
+# CONFIG_BF548M is not set
+# CONFIG_BF549_std is not set
+# CONFIG_BF549M is not set
+# CONFIG_BF561 is not set
+CONFIG_BF_REV_MIN=0
+CONFIG_BF_REV_MAX=2
+# CONFIG_BF_REV_0_0 is not set
+CONFIG_BF_REV_0_1=y
+# CONFIG_BF_REV_0_2 is not set
+# CONFIG_BF_REV_0_3 is not set
+# CONFIG_BF_REV_0_4 is not set
+# CONFIG_BF_REV_0_5 is not set
+# CONFIG_BF_REV_0_6 is not set
+# CONFIG_BF_REV_ANY is not set
+# CONFIG_BF_REV_NONE is not set
+CONFIG_BF51x=y
+# CONFIG_BFIN518F_EZBRD is not set
+CONFIG_BFIN518F_TCM=y
+
+#
+# BF518 Specific Configuration
+#
+
+#
+# Alternative Multiplexing Scheme
+#
+# CONFIG_BF518_SPORT0_PORTF is not set
+CONFIG_BF518_SPORT0_PORTG=y
+CONFIG_BF518_SPORT0_TSCLK_PG10=y
+# CONFIG_BF518_SPORT0_TSCLK_PG14 is not set
+CONFIG_BF518_UART1_PORTF=y
+# CONFIG_BF518_UART1_PORTG is not set
+
+#
+# Interrupt Priority Assignment
+#
+
+#
+# Priority
+#
+CONFIG_IRQ_PLL_WAKEUP=7
+CONFIG_IRQ_DMA0_ERROR=7
+CONFIG_IRQ_DMAR0_BLK=7
+CONFIG_IRQ_DMAR1_BLK=7
+CONFIG_IRQ_DMAR0_OVR=7
+CONFIG_IRQ_DMAR1_OVR=7
+CONFIG_IRQ_PPI_ERROR=7
+CONFIG_IRQ_MAC_ERROR=7
+CONFIG_IRQ_SPORT0_ERROR=7
+CONFIG_IRQ_SPORT1_ERROR=7
+CONFIG_IRQ_PTP_ERROR=7
+CONFIG_IRQ_UART0_ERROR=7
+CONFIG_IRQ_UART1_ERROR=7
+CONFIG_IRQ_RTC=8
+CONFIG_IRQ_PPI=8
+CONFIG_IRQ_SPORT0_RX=9
+CONFIG_IRQ_SPORT0_TX=9
+CONFIG_IRQ_SPORT1_RX=9
+CONFIG_IRQ_SPORT1_TX=9
+CONFIG_IRQ_TWI=10
+CONFIG_IRQ_SPI0=10
+CONFIG_IRQ_UART0_RX=10
+CONFIG_IRQ_UART0_TX=10
+CONFIG_IRQ_UART1_RX=10
+CONFIG_IRQ_UART1_TX=10
+CONFIG_IRQ_OPTSEC=11
+CONFIG_IRQ_CNT=11
+CONFIG_IRQ_MAC_RX=11
+CONFIG_IRQ_PORTH_INTA=11
+CONFIG_IRQ_MAC_TX=11
+CONFIG_IRQ_PORTH_INTB=11
+CONFIG_IRQ_TIMER0=12
+CONFIG_IRQ_TIMER1=12
+CONFIG_IRQ_TIMER2=12
+CONFIG_IRQ_TIMER3=12
+CONFIG_IRQ_TIMER4=12
+CONFIG_IRQ_TIMER5=12
+CONFIG_IRQ_TIMER6=12
+CONFIG_IRQ_TIMER7=12
+CONFIG_IRQ_PORTG_INTA=12
+CONFIG_IRQ_PORTG_INTB=12
+CONFIG_IRQ_MEM_DMA0=13
+CONFIG_IRQ_MEM_DMA1=13
+CONFIG_IRQ_WATCH=13
+CONFIG_IRQ_PORTF_INTA=13
+CONFIG_IRQ_PORTF_INTB=13
+CONFIG_IRQ_SPI0_ERROR=7
+CONFIG_IRQ_SPI1_ERROR=7
+CONFIG_IRQ_RSI_INT0=7
+CONFIG_IRQ_RSI_INT1=7
+CONFIG_IRQ_PWM_TRIP=10
+CONFIG_IRQ_PWM_SYNC=10
+CONFIG_IRQ_PTP_STAT=10
+
+#
+# Board customizations
+#
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
+
+#
+# Clock/PLL Setup
+#
+CONFIG_CLKIN_HZ=25000000
+# CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_VCO_HZ=400000000
+CONFIG_MIN_VCO_HZ=50000000
+CONFIG_MAX_SCLK_HZ=133333333
+CONFIG_MIN_SCLK_HZ=27000000
+
+#
+# Kernel Timer/Scheduler
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+
+#
+# Clock event device
+#
+# CONFIG_TICKSOURCE_GPTMR0 is not set
+CONFIG_TICKSOURCE_CORETMR=y
+
+#
+# Clock souce
+#
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_GPTMR0_CLOCKSOURCE is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# Misc
+#
+CONFIG_BFIN_SCRATCH_REG_RETN=y
+# CONFIG_BFIN_SCRATCH_REG_RETE is not set
+# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
+
+#
+# Blackfin Kernel Optimizations
+#
+
+#
+# Memory Optimizations
+#
+CONFIG_I_ENTRY_L1=y
+CONFIG_EXCPT_IRQ_SYSC_L1=y
+CONFIG_DO_IRQ_L1=y
+CONFIG_CORE_TIMER_IRQ_L1=y
+CONFIG_IDLE_L1=y
+# CONFIG_SCHEDULE_L1 is not set
+CONFIG_ARITHMETIC_OPS_L1=y
+CONFIG_ACCESS_OK_L1=y
+# CONFIG_MEMSET_L1 is not set
+# CONFIG_MEMCPY_L1 is not set
+# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
+# CONFIG_IP_CHECKSUM_L1 is not set
+CONFIG_CACHELINE_ALIGNED_L1=y
+# CONFIG_SYSCALL_TAB_L1 is not set
+# CONFIG_CPLB_SWITCH_TAB_L1 is not set
+CONFIG_APP_STACK_L1=y
+
+#
+# Speed Optimizations
+#
+CONFIG_BFIN_INS_LOWOVERHEAD=y
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
+CONFIG_BFIN_GPTIMERS=m
+# CONFIG_DMA_UNCACHED_4M is not set
+# CONFIG_DMA_UNCACHED_2M is not set
+CONFIG_DMA_UNCACHED_1M=y
+# CONFIG_DMA_UNCACHED_512K is not set
+# CONFIG_DMA_UNCACHED_256K is not set
+# CONFIG_DMA_UNCACHED_128K is not set
+# CONFIG_DMA_UNCACHED_NONE is not set
+
+#
+# Cache Support
+#
+CONFIG_BFIN_ICACHE=y
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_DCACHE=y
+# CONFIG_BFIN_DCACHE_BANKA is not set
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+
+#
+# Memory Protection Unit
+#
+# CONFIG_MPU is not set
+
+#
+# Asynchronous Memory Configuration
+#
+
+#
+# EBIU_AMGCTL Global Control
+#
+CONFIG_C_AMCKEN=y
+CONFIG_C_CDPRIO=y
+# CONFIG_C_AMBEN is not set
+# CONFIG_C_AMBEN_B0 is not set
+# CONFIG_C_AMBEN_B0_B1 is not set
+# CONFIG_C_AMBEN_B0_B1_B2 is not set
+CONFIG_C_AMBEN_ALL=y
+
+#
+# EBIU_AMBCTL Control
+#
+CONFIG_BANK_0=0x7BB0
+CONFIG_BANK_1=0x7BB0
+CONFIG_BANK_2=0x7BB0
+CONFIG_BANK_3=0x99B2
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF_FDPIC=y
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=m
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_UCLINUX is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_BFIN_MAC=y
+CONFIG_BFIN_TX_DESC_NUM=10
+CONFIG_BFIN_RX_DESC_NUM=20
+# CONFIG_BFIN_MAC_RMII is not set
+CONFIG_BFIN_MAC_USE_HWSTAMP=y
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_ADF702X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+# CONFIG_INPUT_AD714X is not set
+# CONFIG_INPUT_ADXL34X is not set
+# CONFIG_INPUT_PCF8574 is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_PPI is not set
+# CONFIG_BFIN_PPIFCD is not set
+# CONFIG_BFIN_SIMPLE_TIMER is not set
+# CONFIG_BFIN_SPI_ADC is not set
+# CONFIG_BFIN_SPORT is not set
+# CONFIG_BFIN_TWI_LCD is not set
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_BFIN_JTAG_COMM=m
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+CONFIG_SERIAL_BFIN_DMA=y
+# CONFIG_SERIAL_BFIN_PIO is not set
+CONFIG_SERIAL_BFIN_UART0=y
+# CONFIG_BFIN_UART0_CTSRTS is not set
+# CONFIG_SERIAL_BFIN_UART1 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_BFIN_SPORT is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_BFIN_OTP=y
+# CONFIG_BFIN_OTP_WRITE_ENABLE is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_BLACKFIN_TWI=y
+CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN_LOCK=y
+# CONFIG_SPI_BFIN_SPORT is not set
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+CONFIG_MMC_DEBUG=y
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+CONFIG_MMC_SPI=y
+# CONFIG_SDH_BFIN is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_BFIN=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# Firmware Drivers
+#
+# CONFIG_FIRMWARE_MEMMAP is not set
+# CONFIG_SIGMA is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_SECTION_MISMATCH=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_NOMMU_REGIONS is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_FRAME_POINTER is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_VERBOSE=y
+CONFIG_DEBUG_MMRS=y
+CONFIG_DEBUG_HWERR=y
+CONFIG_EXACT_HWERR=y
+CONFIG_DEBUG_DOUBLEFAULT=y
+CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
+# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
+# CONFIG_DEBUG_ICACHE_CHECK is not set
+CONFIG_DEBUG_HUNT_FOR_ZERO=y
+CONFIG_DEBUG_BFIN_HWTRACE_ON=y
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
+# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
+CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_CPLB_INFO=y
+CONFIG_ACCESS_CHECK=y
+# CONFIG_BFIN_ISRAM_SELF_TEST is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_SECURITY_TOMOYO is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/blackfin/include/asm/bfin-lq035q1.h b/arch/blackfin/include/asm/bfin-lq035q1.h
index 57bc21ac2296..836895156b5b 100644
--- a/arch/blackfin/include/asm/bfin-lq035q1.h
+++ b/arch/blackfin/include/asm/bfin-lq035q1.h
@@ -8,6 +8,9 @@
 #ifndef BFIN_LQ035Q1_H
 #define BFIN_LQ035Q1_H
 
+/*
+ * LCD Modes
+ */
 #define LQ035_RL	(0 << 8)	/* Right -> Left Scan */
 #define LQ035_LR	(1 << 8)	/* Left -> Right Scan */
 #define LQ035_TB	(1 << 9)	/* Top -> Botton Scan */
@@ -17,9 +20,18 @@
 #define LQ035_NORM	(1 << 13)	/* Reversal */
 #define LQ035_REV	(0 << 13)	/* Reversal */
 
+/*
+ * PPI Modes
+ */
+
+#define USE_RGB565_16_BIT_PPI	1
+#define USE_RGB565_8_BIT_PPI	2
+#define USE_RGB888_8_BIT_PPI	3
+
 struct bfin_lq035q1fb_disp_info {
 
 	unsigned	mode;
+	unsigned	ppi_mode;
 	/* GPIOs */
 	int		use_bl;
 	unsigned 	gpio_bl;
diff --git a/arch/blackfin/include/asm/bfin_can.h b/arch/blackfin/include/asm/bfin_can.h
new file mode 100644
index 000000000000..eec0076a385b
--- /dev/null
+++ b/arch/blackfin/include/asm/bfin_can.h
@@ -0,0 +1,725 @@
+/*
+ * bfin_can.h - interface to Blackfin CANs
+ *
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ASM_BFIN_CAN_H__
+#define __ASM_BFIN_CAN_H__
+
+/*
+ * transmit and receive channels
+ */
+#define TRANSMIT_CHL            24
+#define RECEIVE_STD_CHL         0
+#define RECEIVE_EXT_CHL         4
+#define RECEIVE_RTR_CHL         8
+#define RECEIVE_EXT_RTR_CHL     12
+#define MAX_CHL_NUMBER          32
+
+/*
+ * All Blackfin system MMRs are padded to 32bits even if the register
+ * itself is only 16bits.  So use a helper macro to streamline this.
+ */
+#define __BFP(m) u16 m; u16 __pad_##m
+
+/*
+ * bfin can registers layout
+ */
+struct bfin_can_mask_regs {
+	__BFP(aml);
+	__BFP(amh);
+};
+
+struct bfin_can_channel_regs {
+	u16 data[8];
+	__BFP(dlc);
+	__BFP(tsv);
+	__BFP(id0);
+	__BFP(id1);
+};
+
+struct bfin_can_regs {
+	/*
+	 * global control and status registers
+	 */
+	__BFP(mc1);           /* offset 0x00 */
+	__BFP(md1);           /* offset 0x04 */
+	__BFP(trs1);          /* offset 0x08 */
+	__BFP(trr1);          /* offset 0x0c */
+	__BFP(ta1);           /* offset 0x10 */
+	__BFP(aa1);           /* offset 0x14 */
+	__BFP(rmp1);          /* offset 0x18 */
+	__BFP(rml1);          /* offset 0x1c */
+	__BFP(mbtif1);        /* offset 0x20 */
+	__BFP(mbrif1);        /* offset 0x24 */
+	__BFP(mbim1);         /* offset 0x28 */
+	__BFP(rfh1);          /* offset 0x2c */
+	__BFP(opss1);         /* offset 0x30 */
+	u32 __pad1[3];
+	__BFP(mc2);           /* offset 0x40 */
+	__BFP(md2);           /* offset 0x44 */
+	__BFP(trs2);          /* offset 0x48 */
+	__BFP(trr2);          /* offset 0x4c */
+	__BFP(ta2);           /* offset 0x50 */
+	__BFP(aa2);           /* offset 0x54 */
+	__BFP(rmp2);          /* offset 0x58 */
+	__BFP(rml2);          /* offset 0x5c */
+	__BFP(mbtif2);        /* offset 0x60 */
+	__BFP(mbrif2);        /* offset 0x64 */
+	__BFP(mbim2);         /* offset 0x68 */
+	__BFP(rfh2);          /* offset 0x6c */
+	__BFP(opss2);         /* offset 0x70 */
+	u32 __pad2[3];
+	__BFP(clock);         /* offset 0x80 */
+	__BFP(timing);        /* offset 0x84 */
+	__BFP(debug);         /* offset 0x88 */
+	__BFP(status);        /* offset 0x8c */
+	__BFP(cec);           /* offset 0x90 */
+	__BFP(gis);           /* offset 0x94 */
+	__BFP(gim);           /* offset 0x98 */
+	__BFP(gif);           /* offset 0x9c */
+	__BFP(control);       /* offset 0xa0 */
+	__BFP(intr);          /* offset 0xa4 */
+	u32 __pad3[1];
+	__BFP(mbtd);          /* offset 0xac */
+	__BFP(ewr);           /* offset 0xb0 */
+	__BFP(esr);           /* offset 0xb4 */
+	u32 __pad4[2];
+	__BFP(ucreg);         /* offset 0xc0 */
+	__BFP(uccnt);         /* offset 0xc4 */
+	__BFP(ucrc);          /* offset 0xc8 */
+	__BFP(uccnf);         /* offset 0xcc */
+	u32 __pad5[12];
+
+	/*
+	 * channel(mailbox) mask and message registers
+	 */
+	struct bfin_can_mask_regs msk[MAX_CHL_NUMBER];    /* offset 0x100 */
+	struct bfin_can_channel_regs chl[MAX_CHL_NUMBER]; /* offset 0x200 */
+};
+
+#undef __BFP
+
+/* CAN_CONTROL Masks */
+#define SRS			0x0001	/* Software Reset */
+#define DNM			0x0002	/* Device Net Mode */
+#define ABO			0x0004	/* Auto-Bus On Enable */
+#define TXPRIO		0x0008	/* TX Priority (Priority/Mailbox*) */
+#define WBA			0x0010	/* Wake-Up On CAN Bus Activity Enable */
+#define SMR			0x0020	/* Sleep Mode Request */
+#define CSR			0x0040	/* CAN Suspend Mode Request */
+#define CCR			0x0080	/* CAN Configuration Mode Request */
+
+/* CAN_STATUS Masks */
+#define WT			0x0001	/* TX Warning Flag */
+#define WR			0x0002	/* RX Warning Flag */
+#define EP			0x0004	/* Error Passive Mode */
+#define EBO			0x0008	/* Error Bus Off Mode */
+#define SMA			0x0020	/* Sleep Mode Acknowledge */
+#define CSA			0x0040	/* Suspend Mode Acknowledge */
+#define CCA			0x0080	/* Configuration Mode Acknowledge */
+#define MBPTR		0x1F00	/* Mailbox Pointer */
+#define TRM			0x4000	/* Transmit Mode */
+#define REC			0x8000	/* Receive Mode */
+
+/* CAN_CLOCK Masks */
+#define BRP			0x03FF	/* Bit-Rate Pre-Scaler */
+
+/* CAN_TIMING Masks */
+#define TSEG1		0x000F	/* Time Segment 1 */
+#define TSEG2		0x0070	/* Time Segment 2 */
+#define SAM			0x0080	/* Sampling */
+#define SJW			0x0300	/* Synchronization Jump Width */
+
+/* CAN_DEBUG Masks */
+#define DEC			0x0001	/* Disable CAN Error Counters */
+#define DRI			0x0002	/* Disable CAN RX Input */
+#define DTO			0x0004	/* Disable CAN TX Output */
+#define DIL			0x0008	/* Disable CAN Internal Loop */
+#define MAA			0x0010	/* Mode Auto-Acknowledge Enable */
+#define MRB			0x0020	/* Mode Read Back Enable */
+#define CDE			0x8000	/* CAN Debug Enable */
+
+/* CAN_CEC Masks */
+#define RXECNT		0x00FF	/* Receive Error Counter */
+#define TXECNT		0xFF00	/* Transmit Error Counter */
+
+/* CAN_INTR Masks */
+#define MBRIRQ	0x0001	/* Mailbox Receive Interrupt */
+#define MBTIRQ	0x0002	/* Mailbox Transmit Interrupt */
+#define GIRQ		0x0004	/* Global Interrupt */
+#define SMACK		0x0008	/* Sleep Mode Acknowledge */
+#define CANTX		0x0040	/* CAN TX Bus Value */
+#define CANRX		0x0080	/* CAN RX Bus Value */
+
+/* CAN_MBxx_ID1 and CAN_MBxx_ID0 Masks */
+#define DFC			0xFFFF	/* Data Filtering Code (If Enabled) (ID0) */
+#define EXTID_LO	0xFFFF	/* Lower 16 Bits of Extended Identifier (ID0) */
+#define EXTID_HI	0x0003	/* Upper 2 Bits of Extended Identifier (ID1) */
+#define BASEID		0x1FFC	/* Base Identifier */
+#define IDE			0x2000	/* Identifier Extension */
+#define RTR			0x4000	/* Remote Frame Transmission Request */
+#define AME			0x8000	/* Acceptance Mask Enable */
+
+/* CAN_MBxx_TIMESTAMP Masks */
+#define TSV			0xFFFF	/* Timestamp */
+
+/* CAN_MBxx_LENGTH Masks */
+#define DLC			0x000F	/* Data Length Code */
+
+/* CAN_AMxxH and CAN_AMxxL Masks */
+#define DFM			0xFFFF	/* Data Field Mask (If Enabled) (CAN_AMxxL) */
+#define EXTID_LO	0xFFFF	/* Lower 16 Bits of Extended Identifier (CAN_AMxxL) */
+#define EXTID_HI	0x0003	/* Upper 2 Bits of Extended Identifier (CAN_AMxxH) */
+#define BASEID		0x1FFC	/* Base Identifier */
+#define AMIDE		0x2000	/* Acceptance Mask ID Extension Enable */
+#define FMD			0x4000	/* Full Mask Data Field Enable */
+#define FDF			0x8000	/* Filter On Data Field Enable */
+
+/* CAN_MC1 Masks */
+#define MC0			0x0001	/* Enable Mailbox 0 */
+#define MC1			0x0002	/* Enable Mailbox 1 */
+#define MC2			0x0004	/* Enable Mailbox 2 */
+#define MC3			0x0008	/* Enable Mailbox 3 */
+#define MC4			0x0010	/* Enable Mailbox 4 */
+#define MC5			0x0020	/* Enable Mailbox 5 */
+#define MC6			0x0040	/* Enable Mailbox 6 */
+#define MC7			0x0080	/* Enable Mailbox 7 */
+#define MC8			0x0100	/* Enable Mailbox 8 */
+#define MC9			0x0200	/* Enable Mailbox 9 */
+#define MC10		0x0400	/* Enable Mailbox 10 */
+#define MC11		0x0800	/* Enable Mailbox 11 */
+#define MC12		0x1000	/* Enable Mailbox 12 */
+#define MC13		0x2000	/* Enable Mailbox 13 */
+#define MC14		0x4000	/* Enable Mailbox 14 */
+#define MC15		0x8000	/* Enable Mailbox 15 */
+
+/* CAN_MC2 Masks */
+#define MC16		0x0001	/* Enable Mailbox 16 */
+#define MC17		0x0002	/* Enable Mailbox 17 */
+#define MC18		0x0004	/* Enable Mailbox 18 */
+#define MC19		0x0008	/* Enable Mailbox 19 */
+#define MC20		0x0010	/* Enable Mailbox 20 */
+#define MC21		0x0020	/* Enable Mailbox 21 */
+#define MC22		0x0040	/* Enable Mailbox 22 */
+#define MC23		0x0080	/* Enable Mailbox 23 */
+#define MC24		0x0100	/* Enable Mailbox 24 */
+#define MC25		0x0200	/* Enable Mailbox 25 */
+#define MC26		0x0400	/* Enable Mailbox 26 */
+#define MC27		0x0800	/* Enable Mailbox 27 */
+#define MC28		0x1000	/* Enable Mailbox 28 */
+#define MC29		0x2000	/* Enable Mailbox 29 */
+#define MC30		0x4000	/* Enable Mailbox 30 */
+#define MC31		0x8000	/* Enable Mailbox 31 */
+
+/* CAN_MD1 Masks */
+#define MD0			0x0001	/* Enable Mailbox 0 For Receive */
+#define MD1			0x0002	/* Enable Mailbox 1 For Receive */
+#define MD2			0x0004	/* Enable Mailbox 2 For Receive */
+#define MD3			0x0008	/* Enable Mailbox 3 For Receive */
+#define MD4			0x0010	/* Enable Mailbox 4 For Receive */
+#define MD5			0x0020	/* Enable Mailbox 5 For Receive */
+#define MD6			0x0040	/* Enable Mailbox 6 For Receive */
+#define MD7			0x0080	/* Enable Mailbox 7 For Receive */
+#define MD8			0x0100	/* Enable Mailbox 8 For Receive */
+#define MD9			0x0200	/* Enable Mailbox 9 For Receive */
+#define MD10		0x0400	/* Enable Mailbox 10 For Receive */
+#define MD11		0x0800	/* Enable Mailbox 11 For Receive */
+#define MD12		0x1000	/* Enable Mailbox 12 For Receive */
+#define MD13		0x2000	/* Enable Mailbox 13 For Receive */
+#define MD14		0x4000	/* Enable Mailbox 14 For Receive */
+#define MD15		0x8000	/* Enable Mailbox 15 For Receive */
+
+/* CAN_MD2 Masks */
+#define MD16		0x0001	/* Enable Mailbox 16 For Receive */
+#define MD17		0x0002	/* Enable Mailbox 17 For Receive */
+#define MD18		0x0004	/* Enable Mailbox 18 For Receive */
+#define MD19		0x0008	/* Enable Mailbox 19 For Receive */
+#define MD20		0x0010	/* Enable Mailbox 20 For Receive */
+#define MD21		0x0020	/* Enable Mailbox 21 For Receive */
+#define MD22		0x0040	/* Enable Mailbox 22 For Receive */
+#define MD23		0x0080	/* Enable Mailbox 23 For Receive */
+#define MD24		0x0100	/* Enable Mailbox 24 For Receive */
+#define MD25		0x0200	/* Enable Mailbox 25 For Receive */
+#define MD26		0x0400	/* Enable Mailbox 26 For Receive */
+#define MD27		0x0800	/* Enable Mailbox 27 For Receive */
+#define MD28		0x1000	/* Enable Mailbox 28 For Receive */
+#define MD29		0x2000	/* Enable Mailbox 29 For Receive */
+#define MD30		0x4000	/* Enable Mailbox 30 For Receive */
+#define MD31		0x8000	/* Enable Mailbox 31 For Receive */
+
+/* CAN_RMP1 Masks */
+#define RMP0		0x0001	/* RX Message Pending In Mailbox 0 */
+#define RMP1		0x0002	/* RX Message Pending In Mailbox 1 */
+#define RMP2		0x0004	/* RX Message Pending In Mailbox 2 */
+#define RMP3		0x0008	/* RX Message Pending In Mailbox 3 */
+#define RMP4		0x0010	/* RX Message Pending In Mailbox 4 */
+#define RMP5		0x0020	/* RX Message Pending In Mailbox 5 */
+#define RMP6		0x0040	/* RX Message Pending In Mailbox 6 */
+#define RMP7		0x0080	/* RX Message Pending In Mailbox 7 */
+#define RMP8		0x0100	/* RX Message Pending In Mailbox 8 */
+#define RMP9		0x0200	/* RX Message Pending In Mailbox 9 */
+#define RMP10		0x0400	/* RX Message Pending In Mailbox 10 */
+#define RMP11		0x0800	/* RX Message Pending In Mailbox 11 */
+#define RMP12		0x1000	/* RX Message Pending In Mailbox 12 */
+#define RMP13		0x2000	/* RX Message Pending In Mailbox 13 */
+#define RMP14		0x4000	/* RX Message Pending In Mailbox 14 */
+#define RMP15		0x8000	/* RX Message Pending In Mailbox 15 */
+
+/* CAN_RMP2 Masks */
+#define RMP16		0x0001	/* RX Message Pending In Mailbox 16 */
+#define RMP17		0x0002	/* RX Message Pending In Mailbox 17 */
+#define RMP18		0x0004	/* RX Message Pending In Mailbox 18 */
+#define RMP19		0x0008	/* RX Message Pending In Mailbox 19 */
+#define RMP20		0x0010	/* RX Message Pending In Mailbox 20 */
+#define RMP21		0x0020	/* RX Message Pending In Mailbox 21 */
+#define RMP22		0x0040	/* RX Message Pending In Mailbox 22 */
+#define RMP23		0x0080	/* RX Message Pending In Mailbox 23 */
+#define RMP24		0x0100	/* RX Message Pending In Mailbox 24 */
+#define RMP25		0x0200	/* RX Message Pending In Mailbox 25 */
+#define RMP26		0x0400	/* RX Message Pending In Mailbox 26 */
+#define RMP27		0x0800	/* RX Message Pending In Mailbox 27 */
+#define RMP28		0x1000	/* RX Message Pending In Mailbox 28 */
+#define RMP29		0x2000	/* RX Message Pending In Mailbox 29 */
+#define RMP30		0x4000	/* RX Message Pending In Mailbox 30 */
+#define RMP31		0x8000	/* RX Message Pending In Mailbox 31 */
+
+/* CAN_RML1 Masks */
+#define RML0		0x0001	/* RX Message Lost In Mailbox 0 */
+#define RML1		0x0002	/* RX Message Lost In Mailbox 1 */
+#define RML2		0x0004	/* RX Message Lost In Mailbox 2 */
+#define RML3		0x0008	/* RX Message Lost In Mailbox 3 */
+#define RML4		0x0010	/* RX Message Lost In Mailbox 4 */
+#define RML5		0x0020	/* RX Message Lost In Mailbox 5 */
+#define RML6		0x0040	/* RX Message Lost In Mailbox 6 */
+#define RML7		0x0080	/* RX Message Lost In Mailbox 7 */
+#define RML8		0x0100	/* RX Message Lost In Mailbox 8 */
+#define RML9		0x0200	/* RX Message Lost In Mailbox 9 */
+#define RML10		0x0400	/* RX Message Lost In Mailbox 10 */
+#define RML11		0x0800	/* RX Message Lost In Mailbox 11 */
+#define RML12		0x1000	/* RX Message Lost In Mailbox 12 */
+#define RML13		0x2000	/* RX Message Lost In Mailbox 13 */
+#define RML14		0x4000	/* RX Message Lost In Mailbox 14 */
+#define RML15		0x8000	/* RX Message Lost In Mailbox 15 */
+
+/* CAN_RML2 Masks */
+#define RML16		0x0001	/* RX Message Lost In Mailbox 16 */
+#define RML17		0x0002	/* RX Message Lost In Mailbox 17 */
+#define RML18		0x0004	/* RX Message Lost In Mailbox 18 */
+#define RML19		0x0008	/* RX Message Lost In Mailbox 19 */
+#define RML20		0x0010	/* RX Message Lost In Mailbox 20 */
+#define RML21		0x0020	/* RX Message Lost In Mailbox 21 */
+#define RML22		0x0040	/* RX Message Lost In Mailbox 22 */
+#define RML23		0x0080	/* RX Message Lost In Mailbox 23 */
+#define RML24		0x0100	/* RX Message Lost In Mailbox 24 */
+#define RML25		0x0200	/* RX Message Lost In Mailbox 25 */
+#define RML26		0x0400	/* RX Message Lost In Mailbox 26 */
+#define RML27		0x0800	/* RX Message Lost In Mailbox 27 */
+#define RML28		0x1000	/* RX Message Lost In Mailbox 28 */
+#define RML29		0x2000	/* RX Message Lost In Mailbox 29 */
+#define RML30		0x4000	/* RX Message Lost In Mailbox 30 */
+#define RML31		0x8000	/* RX Message Lost In Mailbox 31 */
+
+/* CAN_OPSS1 Masks */
+#define OPSS0		0x0001	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 0 */
+#define OPSS1		0x0002	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 1 */
+#define OPSS2		0x0004	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 2 */
+#define OPSS3		0x0008	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 3 */
+#define OPSS4		0x0010	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 4 */
+#define OPSS5		0x0020	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 5 */
+#define OPSS6		0x0040	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 6 */
+#define OPSS7		0x0080	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 7 */
+#define OPSS8		0x0100	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 8 */
+#define OPSS9		0x0200	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 9 */
+#define OPSS10		0x0400	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 10 */
+#define OPSS11		0x0800	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 11 */
+#define OPSS12		0x1000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 12 */
+#define OPSS13		0x2000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 13 */
+#define OPSS14		0x4000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 14 */
+#define OPSS15		0x8000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 15 */
+
+/* CAN_OPSS2 Masks */
+#define OPSS16		0x0001	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 16 */
+#define OPSS17		0x0002	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 17 */
+#define OPSS18		0x0004	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 18 */
+#define OPSS19		0x0008	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 19 */
+#define OPSS20		0x0010	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 20 */
+#define OPSS21		0x0020	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 21 */
+#define OPSS22		0x0040	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 22 */
+#define OPSS23		0x0080	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 23 */
+#define OPSS24		0x0100	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 24 */
+#define OPSS25		0x0200	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 25 */
+#define OPSS26		0x0400	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 26 */
+#define OPSS27		0x0800	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 27 */
+#define OPSS28		0x1000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 28 */
+#define OPSS29		0x2000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 29 */
+#define OPSS30		0x4000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 30 */
+#define OPSS31		0x8000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 31 */
+
+/* CAN_TRR1 Masks */
+#define TRR0		0x0001	/* Deny But Don't Lock Access To Mailbox 0 */
+#define TRR1		0x0002	/* Deny But Don't Lock Access To Mailbox 1 */
+#define TRR2		0x0004	/* Deny But Don't Lock Access To Mailbox 2 */
+#define TRR3		0x0008	/* Deny But Don't Lock Access To Mailbox 3 */
+#define TRR4		0x0010	/* Deny But Don't Lock Access To Mailbox 4 */
+#define TRR5		0x0020	/* Deny But Don't Lock Access To Mailbox 5 */
+#define TRR6		0x0040	/* Deny But Don't Lock Access To Mailbox 6 */
+#define TRR7		0x0080	/* Deny But Don't Lock Access To Mailbox 7 */
+#define TRR8		0x0100	/* Deny But Don't Lock Access To Mailbox 8 */
+#define TRR9		0x0200	/* Deny But Don't Lock Access To Mailbox 9 */
+#define TRR10		0x0400	/* Deny But Don't Lock Access To Mailbox 10 */
+#define TRR11		0x0800	/* Deny But Don't Lock Access To Mailbox 11 */
+#define TRR12		0x1000	/* Deny But Don't Lock Access To Mailbox 12 */
+#define TRR13		0x2000	/* Deny But Don't Lock Access To Mailbox 13 */
+#define TRR14		0x4000	/* Deny But Don't Lock Access To Mailbox 14 */
+#define TRR15		0x8000	/* Deny But Don't Lock Access To Mailbox 15 */
+
+/* CAN_TRR2 Masks */
+#define TRR16		0x0001	/* Deny But Don't Lock Access To Mailbox 16 */
+#define TRR17		0x0002	/* Deny But Don't Lock Access To Mailbox 17 */
+#define TRR18		0x0004	/* Deny But Don't Lock Access To Mailbox 18 */
+#define TRR19		0x0008	/* Deny But Don't Lock Access To Mailbox 19 */
+#define TRR20		0x0010	/* Deny But Don't Lock Access To Mailbox 20 */
+#define TRR21		0x0020	/* Deny But Don't Lock Access To Mailbox 21 */
+#define TRR22		0x0040	/* Deny But Don't Lock Access To Mailbox 22 */
+#define TRR23		0x0080	/* Deny But Don't Lock Access To Mailbox 23 */
+#define TRR24		0x0100	/* Deny But Don't Lock Access To Mailbox 24 */
+#define TRR25		0x0200	/* Deny But Don't Lock Access To Mailbox 25 */
+#define TRR26		0x0400	/* Deny But Don't Lock Access To Mailbox 26 */
+#define TRR27		0x0800	/* Deny But Don't Lock Access To Mailbox 27 */
+#define TRR28		0x1000	/* Deny But Don't Lock Access To Mailbox 28 */
+#define TRR29		0x2000	/* Deny But Don't Lock Access To Mailbox 29 */
+#define TRR30		0x4000	/* Deny But Don't Lock Access To Mailbox 30 */
+#define TRR31		0x8000	/* Deny But Don't Lock Access To Mailbox 31 */
+
+/* CAN_TRS1 Masks */
+#define TRS0		0x0001	/* Remote Frame Request For Mailbox 0 */
+#define TRS1		0x0002	/* Remote Frame Request For Mailbox 1 */
+#define TRS2		0x0004	/* Remote Frame Request For Mailbox 2 */
+#define TRS3		0x0008	/* Remote Frame Request For Mailbox 3 */
+#define TRS4		0x0010	/* Remote Frame Request For Mailbox 4 */
+#define TRS5		0x0020	/* Remote Frame Request For Mailbox 5 */
+#define TRS6		0x0040	/* Remote Frame Request For Mailbox 6 */
+#define TRS7		0x0080	/* Remote Frame Request For Mailbox 7 */
+#define TRS8		0x0100	/* Remote Frame Request For Mailbox 8 */
+#define TRS9		0x0200	/* Remote Frame Request For Mailbox 9 */
+#define TRS10		0x0400	/* Remote Frame Request For Mailbox 10 */
+#define TRS11		0x0800	/* Remote Frame Request For Mailbox 11 */
+#define TRS12		0x1000	/* Remote Frame Request For Mailbox 12 */
+#define TRS13		0x2000	/* Remote Frame Request For Mailbox 13 */
+#define TRS14		0x4000	/* Remote Frame Request For Mailbox 14 */
+#define TRS15		0x8000	/* Remote Frame Request For Mailbox 15 */
+
+/* CAN_TRS2 Masks */
+#define TRS16		0x0001	/* Remote Frame Request For Mailbox 16 */
+#define TRS17		0x0002	/* Remote Frame Request For Mailbox 17 */
+#define TRS18		0x0004	/* Remote Frame Request For Mailbox 18 */
+#define TRS19		0x0008	/* Remote Frame Request For Mailbox 19 */
+#define TRS20		0x0010	/* Remote Frame Request For Mailbox 20 */
+#define TRS21		0x0020	/* Remote Frame Request For Mailbox 21 */
+#define TRS22		0x0040	/* Remote Frame Request For Mailbox 22 */
+#define TRS23		0x0080	/* Remote Frame Request For Mailbox 23 */
+#define TRS24		0x0100	/* Remote Frame Request For Mailbox 24 */
+#define TRS25		0x0200	/* Remote Frame Request For Mailbox 25 */
+#define TRS26		0x0400	/* Remote Frame Request For Mailbox 26 */
+#define TRS27		0x0800	/* Remote Frame Request For Mailbox 27 */
+#define TRS28		0x1000	/* Remote Frame Request For Mailbox 28 */
+#define TRS29		0x2000	/* Remote Frame Request For Mailbox 29 */
+#define TRS30		0x4000	/* Remote Frame Request For Mailbox 30 */
+#define TRS31		0x8000	/* Remote Frame Request For Mailbox 31 */
+
+/* CAN_AA1 Masks */
+#define AA0			0x0001	/* Aborted Message In Mailbox 0 */
+#define AA1			0x0002	/* Aborted Message In Mailbox 1 */
+#define AA2			0x0004	/* Aborted Message In Mailbox 2 */
+#define AA3			0x0008	/* Aborted Message In Mailbox 3 */
+#define AA4			0x0010	/* Aborted Message In Mailbox 4 */
+#define AA5			0x0020	/* Aborted Message In Mailbox 5 */
+#define AA6			0x0040	/* Aborted Message In Mailbox 6 */
+#define AA7			0x0080	/* Aborted Message In Mailbox 7 */
+#define AA8			0x0100	/* Aborted Message In Mailbox 8 */
+#define AA9			0x0200	/* Aborted Message In Mailbox 9 */
+#define AA10		0x0400	/* Aborted Message In Mailbox 10 */
+#define AA11		0x0800	/* Aborted Message In Mailbox 11 */
+#define AA12		0x1000	/* Aborted Message In Mailbox 12 */
+#define AA13		0x2000	/* Aborted Message In Mailbox 13 */
+#define AA14		0x4000	/* Aborted Message In Mailbox 14 */
+#define AA15		0x8000	/* Aborted Message In Mailbox 15 */
+
+/* CAN_AA2 Masks */
+#define AA16		0x0001	/* Aborted Message In Mailbox 16 */
+#define AA17		0x0002	/* Aborted Message In Mailbox 17 */
+#define AA18		0x0004	/* Aborted Message In Mailbox 18 */
+#define AA19		0x0008	/* Aborted Message In Mailbox 19 */
+#define AA20		0x0010	/* Aborted Message In Mailbox 20 */
+#define AA21		0x0020	/* Aborted Message In Mailbox 21 */
+#define AA22		0x0040	/* Aborted Message In Mailbox 22 */
+#define AA23		0x0080	/* Aborted Message In Mailbox 23 */
+#define AA24		0x0100	/* Aborted Message In Mailbox 24 */
+#define AA25		0x0200	/* Aborted Message In Mailbox 25 */
+#define AA26		0x0400	/* Aborted Message In Mailbox 26 */
+#define AA27		0x0800	/* Aborted Message In Mailbox 27 */
+#define AA28		0x1000	/* Aborted Message In Mailbox 28 */
+#define AA29		0x2000	/* Aborted Message In Mailbox 29 */
+#define AA30		0x4000	/* Aborted Message In Mailbox 30 */
+#define AA31		0x8000	/* Aborted Message In Mailbox 31 */
+
+/* CAN_TA1 Masks */
+#define TA0			0x0001	/* Transmit Successful From Mailbox 0 */
+#define TA1			0x0002	/* Transmit Successful From Mailbox 1 */
+#define TA2			0x0004	/* Transmit Successful From Mailbox 2 */
+#define TA3			0x0008	/* Transmit Successful From Mailbox 3 */
+#define TA4			0x0010	/* Transmit Successful From Mailbox 4 */
+#define TA5			0x0020	/* Transmit Successful From Mailbox 5 */
+#define TA6			0x0040	/* Transmit Successful From Mailbox 6 */
+#define TA7			0x0080	/* Transmit Successful From Mailbox 7 */
+#define TA8			0x0100	/* Transmit Successful From Mailbox 8 */
+#define TA9			0x0200	/* Transmit Successful From Mailbox 9 */
+#define TA10		0x0400	/* Transmit Successful From Mailbox 10 */
+#define TA11		0x0800	/* Transmit Successful From Mailbox 11 */
+#define TA12		0x1000	/* Transmit Successful From Mailbox 12 */
+#define TA13		0x2000	/* Transmit Successful From Mailbox 13 */
+#define TA14		0x4000	/* Transmit Successful From Mailbox 14 */
+#define TA15		0x8000	/* Transmit Successful From Mailbox 15 */
+
+/* CAN_TA2 Masks */
+#define TA16		0x0001	/* Transmit Successful From Mailbox 16 */
+#define TA17		0x0002	/* Transmit Successful From Mailbox 17 */
+#define TA18		0x0004	/* Transmit Successful From Mailbox 18 */
+#define TA19		0x0008	/* Transmit Successful From Mailbox 19 */
+#define TA20		0x0010	/* Transmit Successful From Mailbox 20 */
+#define TA21		0x0020	/* Transmit Successful From Mailbox 21 */
+#define TA22		0x0040	/* Transmit Successful From Mailbox 22 */
+#define TA23		0x0080	/* Transmit Successful From Mailbox 23 */
+#define TA24		0x0100	/* Transmit Successful From Mailbox 24 */
+#define TA25		0x0200	/* Transmit Successful From Mailbox 25 */
+#define TA26		0x0400	/* Transmit Successful From Mailbox 26 */
+#define TA27		0x0800	/* Transmit Successful From Mailbox 27 */
+#define TA28		0x1000	/* Transmit Successful From Mailbox 28 */
+#define TA29		0x2000	/* Transmit Successful From Mailbox 29 */
+#define TA30		0x4000	/* Transmit Successful From Mailbox 30 */
+#define TA31		0x8000	/* Transmit Successful From Mailbox 31 */
+
+/* CAN_MBTD Masks */
+#define TDPTR		0x001F	/* Mailbox To Temporarily Disable */
+#define TDA			0x0040	/* Temporary Disable Acknowledge */
+#define TDR			0x0080	/* Temporary Disable Request */
+
+/* CAN_RFH1 Masks */
+#define RFH0		0x0001	/* Enable Automatic Remote Frame Handling For Mailbox 0 */
+#define RFH1		0x0002	/* Enable Automatic Remote Frame Handling For Mailbox 1 */
+#define RFH2		0x0004	/* Enable Automatic Remote Frame Handling For Mailbox 2 */
+#define RFH3		0x0008	/* Enable Automatic Remote Frame Handling For Mailbox 3 */
+#define RFH4		0x0010	/* Enable Automatic Remote Frame Handling For Mailbox 4 */
+#define RFH5		0x0020	/* Enable Automatic Remote Frame Handling For Mailbox 5 */
+#define RFH6		0x0040	/* Enable Automatic Remote Frame Handling For Mailbox 6 */
+#define RFH7		0x0080	/* Enable Automatic Remote Frame Handling For Mailbox 7 */
+#define RFH8		0x0100	/* Enable Automatic Remote Frame Handling For Mailbox 8 */
+#define RFH9		0x0200	/* Enable Automatic Remote Frame Handling For Mailbox 9 */
+#define RFH10		0x0400	/* Enable Automatic Remote Frame Handling For Mailbox 10 */
+#define RFH11		0x0800	/* Enable Automatic Remote Frame Handling For Mailbox 11 */
+#define RFH12		0x1000	/* Enable Automatic Remote Frame Handling For Mailbox 12 */
+#define RFH13		0x2000	/* Enable Automatic Remote Frame Handling For Mailbox 13 */
+#define RFH14		0x4000	/* Enable Automatic Remote Frame Handling For Mailbox 14 */
+#define RFH15		0x8000	/* Enable Automatic Remote Frame Handling For Mailbox 15 */
+
+/* CAN_RFH2 Masks */
+#define RFH16		0x0001	/* Enable Automatic Remote Frame Handling For Mailbox 16 */
+#define RFH17		0x0002	/* Enable Automatic Remote Frame Handling For Mailbox 17 */
+#define RFH18		0x0004	/* Enable Automatic Remote Frame Handling For Mailbox 18 */
+#define RFH19		0x0008	/* Enable Automatic Remote Frame Handling For Mailbox 19 */
+#define RFH20		0x0010	/* Enable Automatic Remote Frame Handling For Mailbox 20 */
+#define RFH21		0x0020	/* Enable Automatic Remote Frame Handling For Mailbox 21 */
+#define RFH22		0x0040	/* Enable Automatic Remote Frame Handling For Mailbox 22 */
+#define RFH23		0x0080	/* Enable Automatic Remote Frame Handling For Mailbox 23 */
+#define RFH24		0x0100	/* Enable Automatic Remote Frame Handling For Mailbox 24 */
+#define RFH25		0x0200	/* Enable Automatic Remote Frame Handling For Mailbox 25 */
+#define RFH26		0x0400	/* Enable Automatic Remote Frame Handling For Mailbox 26 */
+#define RFH27		0x0800	/* Enable Automatic Remote Frame Handling For Mailbox 27 */
+#define RFH28		0x1000	/* Enable Automatic Remote Frame Handling For Mailbox 28 */
+#define RFH29		0x2000	/* Enable Automatic Remote Frame Handling For Mailbox 29 */
+#define RFH30		0x4000	/* Enable Automatic Remote Frame Handling For Mailbox 30 */
+#define RFH31		0x8000	/* Enable Automatic Remote Frame Handling For Mailbox 31 */
+
+/* CAN_MBTIF1 Masks */
+#define MBTIF0		0x0001	/* TX Interrupt Active In Mailbox 0 */
+#define MBTIF1		0x0002	/* TX Interrupt Active In Mailbox 1 */
+#define MBTIF2		0x0004	/* TX Interrupt Active In Mailbox 2 */
+#define MBTIF3		0x0008	/* TX Interrupt Active In Mailbox 3 */
+#define MBTIF4		0x0010	/* TX Interrupt Active In Mailbox 4 */
+#define MBTIF5		0x0020	/* TX Interrupt Active In Mailbox 5 */
+#define MBTIF6		0x0040	/* TX Interrupt Active In Mailbox 6 */
+#define MBTIF7		0x0080	/* TX Interrupt Active In Mailbox 7 */
+#define MBTIF8		0x0100	/* TX Interrupt Active In Mailbox 8 */
+#define MBTIF9		0x0200	/* TX Interrupt Active In Mailbox 9 */
+#define MBTIF10		0x0400	/* TX Interrupt Active In Mailbox 10 */
+#define MBTIF11		0x0800	/* TX Interrupt Active In Mailbox 11 */
+#define MBTIF12		0x1000	/* TX Interrupt Active In Mailbox 12 */
+#define MBTIF13		0x2000	/* TX Interrupt Active In Mailbox 13 */
+#define MBTIF14		0x4000	/* TX Interrupt Active In Mailbox 14 */
+#define MBTIF15		0x8000	/* TX Interrupt Active In Mailbox 15 */
+
+/* CAN_MBTIF2 Masks */
+#define MBTIF16		0x0001	/* TX Interrupt Active In Mailbox 16 */
+#define MBTIF17		0x0002	/* TX Interrupt Active In Mailbox 17 */
+#define MBTIF18		0x0004	/* TX Interrupt Active In Mailbox 18 */
+#define MBTIF19		0x0008	/* TX Interrupt Active In Mailbox 19 */
+#define MBTIF20		0x0010	/* TX Interrupt Active In Mailbox 20 */
+#define MBTIF21		0x0020	/* TX Interrupt Active In Mailbox 21 */
+#define MBTIF22		0x0040	/* TX Interrupt Active In Mailbox 22 */
+#define MBTIF23		0x0080	/* TX Interrupt Active In Mailbox 23 */
+#define MBTIF24		0x0100	/* TX Interrupt Active In Mailbox 24 */
+#define MBTIF25		0x0200	/* TX Interrupt Active In Mailbox 25 */
+#define MBTIF26		0x0400	/* TX Interrupt Active In Mailbox 26 */
+#define MBTIF27		0x0800	/* TX Interrupt Active In Mailbox 27 */
+#define MBTIF28		0x1000	/* TX Interrupt Active In Mailbox 28 */
+#define MBTIF29		0x2000	/* TX Interrupt Active In Mailbox 29 */
+#define MBTIF30		0x4000	/* TX Interrupt Active In Mailbox 30 */
+#define MBTIF31		0x8000	/* TX Interrupt Active In Mailbox 31 */
+
+/* CAN_MBRIF1 Masks */
+#define MBRIF0		0x0001	/* RX Interrupt Active In Mailbox 0 */
+#define MBRIF1		0x0002	/* RX Interrupt Active In Mailbox 1 */
+#define MBRIF2		0x0004	/* RX Interrupt Active In Mailbox 2 */
+#define MBRIF3		0x0008	/* RX Interrupt Active In Mailbox 3 */
+#define MBRIF4		0x0010	/* RX Interrupt Active In Mailbox 4 */
+#define MBRIF5		0x0020	/* RX Interrupt Active In Mailbox 5 */
+#define MBRIF6		0x0040	/* RX Interrupt Active In Mailbox 6 */
+#define MBRIF7		0x0080	/* RX Interrupt Active In Mailbox 7 */
+#define MBRIF8		0x0100	/* RX Interrupt Active In Mailbox 8 */
+#define MBRIF9		0x0200	/* RX Interrupt Active In Mailbox 9 */
+#define MBRIF10		0x0400	/* RX Interrupt Active In Mailbox 10 */
+#define MBRIF11		0x0800	/* RX Interrupt Active In Mailbox 11 */
+#define MBRIF12		0x1000	/* RX Interrupt Active In Mailbox 12 */
+#define MBRIF13		0x2000	/* RX Interrupt Active In Mailbox 13 */
+#define MBRIF14		0x4000	/* RX Interrupt Active In Mailbox 14 */
+#define MBRIF15		0x8000	/* RX Interrupt Active In Mailbox 15 */
+
+/* CAN_MBRIF2 Masks */
+#define MBRIF16		0x0001	/* RX Interrupt Active In Mailbox 16 */
+#define MBRIF17		0x0002	/* RX Interrupt Active In Mailbox 17 */
+#define MBRIF18		0x0004	/* RX Interrupt Active In Mailbox 18 */
+#define MBRIF19		0x0008	/* RX Interrupt Active In Mailbox 19 */
+#define MBRIF20		0x0010	/* RX Interrupt Active In Mailbox 20 */
+#define MBRIF21		0x0020	/* RX Interrupt Active In Mailbox 21 */
+#define MBRIF22		0x0040	/* RX Interrupt Active In Mailbox 22 */
+#define MBRIF23		0x0080	/* RX Interrupt Active In Mailbox 23 */
+#define MBRIF24		0x0100	/* RX Interrupt Active In Mailbox 24 */
+#define MBRIF25		0x0200	/* RX Interrupt Active In Mailbox 25 */
+#define MBRIF26		0x0400	/* RX Interrupt Active In Mailbox 26 */
+#define MBRIF27		0x0800	/* RX Interrupt Active In Mailbox 27 */
+#define MBRIF28		0x1000	/* RX Interrupt Active In Mailbox 28 */
+#define MBRIF29		0x2000	/* RX Interrupt Active In Mailbox 29 */
+#define MBRIF30		0x4000	/* RX Interrupt Active In Mailbox 30 */
+#define MBRIF31		0x8000	/* RX Interrupt Active In Mailbox 31 */
+
+/* CAN_MBIM1 Masks */
+#define MBIM0		0x0001	/* Enable Interrupt For Mailbox 0 */
+#define MBIM1		0x0002	/* Enable Interrupt For Mailbox 1 */
+#define MBIM2		0x0004	/* Enable Interrupt For Mailbox 2 */
+#define MBIM3		0x0008	/* Enable Interrupt For Mailbox 3 */
+#define MBIM4		0x0010	/* Enable Interrupt For Mailbox 4 */
+#define MBIM5		0x0020	/* Enable Interrupt For Mailbox 5 */
+#define MBIM6		0x0040	/* Enable Interrupt For Mailbox 6 */
+#define MBIM7		0x0080	/* Enable Interrupt For Mailbox 7 */
+#define MBIM8		0x0100	/* Enable Interrupt For Mailbox 8 */
+#define MBIM9		0x0200	/* Enable Interrupt For Mailbox 9 */
+#define MBIM10		0x0400	/* Enable Interrupt For Mailbox 10 */
+#define MBIM11		0x0800	/* Enable Interrupt For Mailbox 11 */
+#define MBIM12		0x1000	/* Enable Interrupt For Mailbox 12 */
+#define MBIM13		0x2000	/* Enable Interrupt For Mailbox 13 */
+#define MBIM14		0x4000	/* Enable Interrupt For Mailbox 14 */
+#define MBIM15		0x8000	/* Enable Interrupt For Mailbox 15 */
+
+/* CAN_MBIM2 Masks */
+#define MBIM16		0x0001	/* Enable Interrupt For Mailbox 16 */
+#define MBIM17		0x0002	/* Enable Interrupt For Mailbox 17 */
+#define MBIM18		0x0004	/* Enable Interrupt For Mailbox 18 */
+#define MBIM19		0x0008	/* Enable Interrupt For Mailbox 19 */
+#define MBIM20		0x0010	/* Enable Interrupt For Mailbox 20 */
+#define MBIM21		0x0020	/* Enable Interrupt For Mailbox 21 */
+#define MBIM22		0x0040	/* Enable Interrupt For Mailbox 22 */
+#define MBIM23		0x0080	/* Enable Interrupt For Mailbox 23 */
+#define MBIM24		0x0100	/* Enable Interrupt For Mailbox 24 */
+#define MBIM25		0x0200	/* Enable Interrupt For Mailbox 25 */
+#define MBIM26		0x0400	/* Enable Interrupt For Mailbox 26 */
+#define MBIM27		0x0800	/* Enable Interrupt For Mailbox 27 */
+#define MBIM28		0x1000	/* Enable Interrupt For Mailbox 28 */
+#define MBIM29		0x2000	/* Enable Interrupt For Mailbox 29 */
+#define MBIM30		0x4000	/* Enable Interrupt For Mailbox 30 */
+#define MBIM31		0x8000	/* Enable Interrupt For Mailbox 31 */
+
+/* CAN_GIM Masks */
+#define EWTIM		0x0001	/* Enable TX Error Count Interrupt */
+#define EWRIM		0x0002	/* Enable RX Error Count Interrupt */
+#define EPIM		0x0004	/* Enable Error-Passive Mode Interrupt */
+#define BOIM		0x0008	/* Enable Bus Off Interrupt */
+#define WUIM		0x0010	/* Enable Wake-Up Interrupt */
+#define UIAIM		0x0020	/* Enable Access To Unimplemented Address Interrupt */
+#define AAIM		0x0040	/* Enable Abort Acknowledge Interrupt */
+#define RMLIM		0x0080	/* Enable RX Message Lost Interrupt */
+#define UCEIM		0x0100	/* Enable Universal Counter Overflow Interrupt */
+#define EXTIM		0x0200	/* Enable External Trigger Output Interrupt */
+#define ADIM		0x0400	/* Enable Access Denied Interrupt */
+
+/* CAN_GIS Masks */
+#define EWTIS		0x0001	/* TX Error Count IRQ Status */
+#define EWRIS		0x0002	/* RX Error Count IRQ Status */
+#define EPIS		0x0004	/* Error-Passive Mode IRQ Status */
+#define BOIS		0x0008	/* Bus Off IRQ Status */
+#define WUIS		0x0010	/* Wake-Up IRQ Status */
+#define UIAIS		0x0020	/* Access To Unimplemented Address IRQ Status */
+#define AAIS		0x0040	/* Abort Acknowledge IRQ Status */
+#define RMLIS		0x0080	/* RX Message Lost IRQ Status */
+#define UCEIS		0x0100	/* Universal Counter Overflow IRQ Status */
+#define EXTIS		0x0200	/* External Trigger Output IRQ Status */
+#define ADIS		0x0400	/* Access Denied IRQ Status */
+
+/* CAN_GIF Masks */
+#define EWTIF		0x0001	/* TX Error Count IRQ Flag */
+#define EWRIF		0x0002	/* RX Error Count IRQ Flag */
+#define EPIF		0x0004	/* Error-Passive Mode IRQ Flag */
+#define BOIF		0x0008	/* Bus Off IRQ Flag */
+#define WUIF		0x0010	/* Wake-Up IRQ Flag */
+#define UIAIF		0x0020	/* Access To Unimplemented Address IRQ Flag */
+#define AAIF		0x0040	/* Abort Acknowledge IRQ Flag */
+#define RMLIF		0x0080	/* RX Message Lost IRQ Flag */
+#define UCEIF		0x0100	/* Universal Counter Overflow IRQ Flag */
+#define EXTIF		0x0200	/* External Trigger Output IRQ Flag */
+#define ADIF		0x0400	/* Access Denied IRQ Flag */
+
+/* CAN_UCCNF Masks */
+#define UCCNF		0x000F	/* Universal Counter Mode */
+#define UC_STAMP	0x0001	/*  Timestamp Mode */
+#define UC_WDOG		0x0002	/*  Watchdog Mode */
+#define UC_AUTOTX	0x0003	/*  Auto-Transmit Mode */
+#define UC_ERROR	0x0006	/*  CAN Error Frame Count */
+#define UC_OVER		0x0007	/*  CAN Overload Frame Count */
+#define UC_LOST		0x0008	/*  Arbitration Lost During TX Count */
+#define UC_AA		0x0009	/*  TX Abort Count */
+#define UC_TA		0x000A	/*  TX Successful Count */
+#define UC_REJECT	0x000B	/*  RX Message Rejected Count */
+#define UC_RML		0x000C	/*  RX Message Lost Count */
+#define UC_RX		0x000D	/*  Total Successful RX Messages Count */
+#define UC_RMP		0x000E	/*  Successful RX W/Matching ID Count */
+#define UC_ALL		0x000F	/*  Correct Message On CAN Bus Line Count */
+#define UCRC		0x0020	/* Universal Counter Reload/Clear */
+#define UCCT		0x0040	/* Universal Counter CAN Trigger */
+#define UCE			0x0080	/* Universal Counter Enable */
+
+/* CAN_ESR Masks */
+#define ACKE		0x0004	/* Acknowledge Error */
+#define SER			0x0008	/* Stuff Error */
+#define CRCE		0x0010	/* CRC Error */
+#define SA0			0x0020	/* Stuck At Dominant Error */
+#define BEF			0x0040	/* Bit Error Flag */
+#define FER			0x0080	/* Form Error Flag */
+
+/* CAN_EWR Masks */
+#define EWLREC		0x00FF	/* RX Error Count Limit (For EWRIS) */
+#define EWLTEC		0xFF00	/* TX Error Count Limit (For EWTIS) */
+
+#endif
diff --git a/arch/blackfin/include/asm/bfin_sport.h b/arch/blackfin/include/asm/bfin_sport.h
index b558908e1c79..9626cf7e4251 100644
--- a/arch/blackfin/include/asm/bfin_sport.h
+++ b/arch/blackfin/include/asm/bfin_sport.h
@@ -1,7 +1,7 @@
 /*
- * bfin_sport.h - userspace header for bfin sport driver
+ * bfin_sport.h - interface to Blackfin SPORTs
  *
- * Copyright 2004-2008 Analog Devices Inc.
+ * Copyright 2004-2009 Analog Devices Inc.
  *
  * Licensed under the GPL-2 or later.
  */
@@ -9,16 +9,6 @@
 #ifndef __BFIN_SPORT_H__
 #define __BFIN_SPORT_H__
 
-#ifdef __KERNEL__
-#include <linux/cdev.h>
-#include <linux/mutex.h>
-#include <linux/sched.h>
-#include <linux/wait.h>
-#endif
-
-#define SPORT_MAJOR	237
-#define SPORT_NR_DEVS	2
-
 /* Sport mode: it can be set to TDM, i2s or others */
 #define NORM_MODE	0x0
 #define TDM_MODE	0x1
@@ -35,7 +25,7 @@ struct sport_config {
 	unsigned int mode:3;
 
 	/* if TDM mode is selected, channels must be set */
-	int channels;		/* Must be in 8 units */
+	int channels;	/* Must be in 8 units */
 	unsigned int frame_delay:4;	/* Delay between frame sync pulse and first bit */
 
 	/* I2S mode */
@@ -69,94 +59,137 @@ struct sport_config {
 
 #ifdef __KERNEL__
 
-struct sport_register {
-	unsigned short tcr1;
-	unsigned short reserved0;
-	unsigned short tcr2;
-	unsigned short reserved1;
-	unsigned short tclkdiv;
-	unsigned short reserved2;
-	unsigned short tfsdiv;
-	unsigned short reserved3;
-	unsigned long tx;
-	unsigned long reserved_l0;
-	unsigned long rx;
-	unsigned long reserved_l1;
-	unsigned short rcr1;
-	unsigned short reserved4;
-	unsigned short rcr2;
-	unsigned short reserved5;
-	unsigned short rclkdiv;
-	unsigned short reserved6;
-	unsigned short rfsdiv;
-	unsigned short reserved7;
-	unsigned short stat;
-	unsigned short reserved8;
-	unsigned short chnl;
-	unsigned short reserved9;
-	unsigned short mcmc1;
-	unsigned short reserved10;
-	unsigned short mcmc2;
-	unsigned short reserved11;
-	unsigned long mtcs0;
-	unsigned long mtcs1;
-	unsigned long mtcs2;
-	unsigned long mtcs3;
-	unsigned long mrcs0;
-	unsigned long mrcs1;
-	unsigned long mrcs2;
-	unsigned long mrcs3;
-};
-
-struct sport_dev {
-	struct cdev cdev;	/* Char device structure */
-
-	int sport_num;
+#include <linux/types.h>
 
-	int dma_rx_chan;
-	int dma_tx_chan;
-
-	int rx_irq;
-	unsigned char *rx_buf;	/* Buffer store the received data */
-	int rx_len;		/* How many bytes will be received */
-	int rx_received;	/* How many bytes has been received */
-
-	int tx_irq;
-	const unsigned char *tx_buf;
-	int tx_len;
-	int tx_sent;
-
-	int err_irq;
-
-	struct mutex mutex;	/* mutual exclusion semaphore */
-	struct task_struct *task;
-
-	wait_queue_head_t waitq;
-	int	wait_con;
-	struct sport_register *regs;
-	struct sport_config config;
+/*
+ * All Blackfin system MMRs are padded to 32bits even if the register
+ * itself is only 16bits.  So use a helper macro to streamline this.
+ */
+#define __BFP(m) u16 m; u16 __pad_##m
+struct sport_register {
+	__BFP(tcr1);
+	__BFP(tcr2);
+	__BFP(tclkdiv);
+	__BFP(tfsdiv);
+	union {
+		u32 tx32;
+		u16 tx16;
+	};
+	u32 __pad_tx;
+	union {
+		u32 rx32;	/* use the anomaly wrapper below */
+		u16 rx16;
+	};
+	u32 __pad_rx;
+	__BFP(rcr1);
+	__BFP(rcr2);
+	__BFP(rclkdiv);
+	__BFP(rfsdiv);
+	__BFP(stat);
+	__BFP(chnl);
+	__BFP(mcmc1);
+	__BFP(mcmc2);
+	u32 mtcs0;
+	u32 mtcs1;
+	u32 mtcs2;
+	u32 mtcs3;
+	u32 mrcs0;
+	u32 mrcs1;
+	u32 mrcs2;
+	u32 mrcs3;
 };
+#undef __BFP
+
+#define bfin_read_sport_rx32(base) \
+({ \
+	struct sport_register *__mmrs = (void *)base; \
+	u32 __ret; \
+	unsigned long flags; \
+	if (ANOMALY_05000473) \
+		local_irq_save(flags); \
+	__ret = __mmrs->rx32; \
+	if (ANOMALY_05000473) \
+		local_irq_restore(flags); \
+	__ret; \
+})
 
 #endif
 
-#define SPORT_TCR1	0
-#define	SPORT_TCR2	1
-#define	SPORT_TCLKDIV	2
-#define	SPORT_TFSDIV	3
-#define	SPORT_RCR1	8
-#define	SPORT_RCR2	9
-#define SPORT_RCLKDIV	10
-#define	SPORT_RFSDIV	11
-#define SPORT_CHANNEL	13
-#define SPORT_MCMC1	14
-#define SPORT_MCMC2	15
-#define SPORT_MTCS0	16
-#define SPORT_MTCS1	17
-#define SPORT_MTCS2	18
-#define SPORT_MTCS3	19
-#define SPORT_MRCS0	20
-#define SPORT_MRCS1	21
-#define SPORT_MRCS2	22
-#define SPORT_MRCS3	23
+/* Workaround defBF*.h SPORT MMRs till they get cleansed */
+#undef DTYPE_NORM
+#undef SLEN
+#undef SP_WOFF
+#undef SP_WSIZE
+
+/* SPORT_TCR1 Masks */
+#define TSPEN		0x0001	/* TX enable */
+#define ITCLK		0x0002	/* Internal TX Clock Select */
+#define TDTYPE		0x000C	/* TX Data Formatting Select */
+#define DTYPE_NORM	0x0000	/* Data Format Normal */
+#define DTYPE_ULAW	0x0008	/* Compand Using u-Law */
+#define DTYPE_ALAW	0x000C	/* Compand Using A-Law */
+#define TLSBIT		0x0010	/* TX Bit Order */
+#define ITFS		0x0200	/* Internal TX Frame Sync Select */
+#define TFSR		0x0400	/* TX Frame Sync Required Select */
+#define DITFS		0x0800	/* Data Independent TX Frame Sync Select */
+#define LTFS		0x1000	/* Low TX Frame Sync Select */
+#define LATFS		0x2000	/* Late TX Frame Sync Select */
+#define TCKFE		0x4000	/* TX Clock Falling Edge Select */
+
+/* SPORT_TCR2 Masks */
+#define SLEN		0x001F	/* SPORT TX Word Length (2 - 31) */
+#define DP_SLEN(x)	BFIN_DEPOSIT(SLEN, x)
+#define EX_SLEN(x)	BFIN_EXTRACT(SLEN, x)
+#define TXSE		0x0100	/* TX Secondary Enable */
+#define TSFSE		0x0200	/* TX Stereo Frame Sync Enable */
+#define TRFST		0x0400	/* TX Right-First Data Order */
+
+/* SPORT_RCR1 Masks */
+#define RSPEN		0x0001	/* RX enable */
+#define IRCLK		0x0002	/* Internal RX Clock Select */
+#define RDTYPE		0x000C	/* RX Data Formatting Select */
+/* DTYPE_* defined above */
+#define RLSBIT		0x0010	/* RX Bit Order */
+#define IRFS		0x0200	/* Internal RX Frame Sync Select */
+#define RFSR		0x0400	/* RX Frame Sync Required Select */
+#define LRFS		0x1000	/* Low RX Frame Sync Select */
+#define LARFS		0x2000	/* Late RX Frame Sync Select */
+#define RCKFE		0x4000	/* RX Clock Falling Edge Select */
+
+/* SPORT_RCR2 Masks */
+/* SLEN defined above */
+#define RXSE		0x0100	/* RX Secondary Enable */
+#define RSFSE		0x0200	/* RX Stereo Frame Sync Enable */
+#define RRFST		0x0400	/* Right-First Data Order */
+
+/* SPORT_STAT Masks */
+#define RXNE		0x0001	/* RX FIFO Not Empty Status */
+#define RUVF		0x0002	/* RX Underflow Status */
+#define ROVF		0x0004	/* RX Overflow Status */
+#define TXF		0x0008	/* TX FIFO Full Status */
+#define TUVF		0x0010	/* TX Underflow Status */
+#define TOVF		0x0020	/* TX Overflow Status */
+#define TXHRE		0x0040	/* TX Hold Register Empty */
+
+/* SPORT_MCMC1 Masks */
+#define SP_WOFF		0x03FF	/* Multichannel Window Offset Field */
+#define DP_SP_WOFF(x)	BFIN_DEPOSIT(SP_WOFF, x)
+#define EX_SP_WOFF(x)	BFIN_EXTRACT(SP_WOFF, x)
+#define SP_WSIZE	0xF000	/* Multichannel Window Size Field */
+#define DP_SP_WSIZE(x)	BFIN_DEPOSIT(SP_WSIZE, x)
+#define EX_SP_WSIZE(x)	BFIN_EXTRACT(SP_WSIZE, x)
+
+/* SPORT_MCMC2 Masks */
+#define MCCRM		0x0003	/* Multichannel Clock Recovery Mode */
+#define REC_BYPASS	0x0000	/* Bypass Mode (No Clock Recovery) */
+#define REC_2FROM4	0x0002	/* Recover 2 MHz Clock from 4 MHz Clock */
+#define REC_8FROM16	0x0003	/* Recover 8 MHz Clock from 16 MHz Clock */
+#define MCDTXPE		0x0004	/* Multichannel DMA Transmit Packing */
+#define MCDRXPE		0x0008	/* Multichannel DMA Receive Packing */
+#define MCMEN		0x0010	/* Multichannel Frame Mode Enable */
+#define FSDR		0x0080	/* Multichannel Frame Sync to Data Relationship */
+#define MFD		0xF000	/* Multichannel Frame Delay */
+#define DP_MFD(x)	BFIN_DEPOSIT(MFD, x)
+#define EX_MFD(x)	BFIN_EXTRACT(MFD, x)
 
 #endif
diff --git a/arch/blackfin/include/asm/bfin_watchdog.h b/arch/blackfin/include/asm/bfin_watchdog.h
new file mode 100644
index 000000000000..dce09829a095
--- /dev/null
+++ b/arch/blackfin/include/asm/bfin_watchdog.h
@@ -0,0 +1,30 @@
+/*
+ * bfin_watchdog.h - Blackfin watchdog definitions
+ *
+ * Copyright 2006-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _BFIN_WATCHDOG_H
+#define _BFIN_WATCHDOG_H
+
+/* Bit in SWRST that indicates boot caused by watchdog */
+#define SWRST_RESET_WDOG 0x4000
+
+/* Bit in WDOG_CTL that indicates watchdog has expired (WDR0) */
+#define WDOG_EXPIRED 0x8000
+
+/* Masks for WDEV field in WDOG_CTL register */
+#define ICTL_RESET   0x0
+#define ICTL_NMI     0x2
+#define ICTL_GPI     0x4
+#define ICTL_NONE    0x6
+#define ICTL_MASK    0x6
+
+/* Masks for WDEN field in WDOG_CTL register */
+#define WDEN_MASK    0x0FF0
+#define WDEN_ENABLE  0x0000
+#define WDEN_DISABLE 0x0AD0
+
+#endif
diff --git a/arch/blackfin/include/asm/bitops.h b/arch/blackfin/include/asm/bitops.h
index a2ff3fb3568d..605ba8e9b2e4 100644
--- a/arch/blackfin/include/asm/bitops.h
+++ b/arch/blackfin/include/asm/bitops.h
@@ -7,22 +7,41 @@
 #ifndef _BLACKFIN_BITOPS_H
 #define _BLACKFIN_BITOPS_H
 
-#ifndef CONFIG_SMP
-# include <asm-generic/bitops.h>
-#else
+#include <linux/compiler.h>
+
+#include <asm-generic/bitops/__ffs.h>
+#include <asm-generic/bitops/ffz.h>
+#include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/__fls.h>
+#include <asm-generic/bitops/fls64.h>
+#include <asm-generic/bitops/find.h>
 
 #ifndef _LINUX_BITOPS_H
 #error only <linux/bitops.h> can be included directly
 #endif
 
-#include <linux/compiler.h>
-#include <asm/byteorder.h>	/* swab32 */
-
-#include <asm-generic/bitops/ffs.h>
-#include <asm-generic/bitops/__ffs.h>
 #include <asm-generic/bitops/sched.h>
-#include <asm-generic/bitops/ffz.h>
+#include <asm-generic/bitops/ffs.h>
+#include <asm-generic/bitops/lock.h>
+#include <asm-generic/bitops/ext2-non-atomic.h>
+#include <asm-generic/bitops/ext2-atomic.h>
+#include <asm-generic/bitops/minix.h>
+
+#ifndef CONFIG_SMP
+#include <linux/irqflags.h>
+
+/*
+ * clear_bit may not imply a memory barrier
+ */
+#ifndef smp_mb__before_clear_bit
+#define smp_mb__before_clear_bit()	smp_mb()
+#define smp_mb__after_clear_bit()	smp_mb()
+#endif
+#include <asm-generic/bitops/atomic.h>
+#include <asm-generic/bitops/non-atomic.h>
+#else
 
+#include <asm/byteorder.h>	/* swab32 */
 #include <linux/linkage.h>
 
 asmlinkage int __raw_bit_set_asm(volatile unsigned long *addr, int nr);
@@ -89,19 +108,36 @@ static inline int test_and_change_bit(int nr, volatile unsigned long *addr)
 
 #include <asm-generic/bitops/non-atomic.h>
 
-#include <asm-generic/bitops/find.h>
-#include <asm-generic/bitops/hweight.h>
-#include <asm-generic/bitops/lock.h>
+#endif /* CONFIG_SMP */
 
-#include <asm-generic/bitops/ext2-atomic.h>
-#include <asm-generic/bitops/ext2-non-atomic.h>
+/*
+ * hweightN: returns the hamming weight (i.e. the number
+ * of bits set) of a N-bit word
+ */
 
-#include <asm-generic/bitops/minix.h>
+static inline unsigned int hweight32(unsigned int w)
+{
+	unsigned int res;
 
-#include <asm-generic/bitops/fls.h>
-#include <asm-generic/bitops/__fls.h>
-#include <asm-generic/bitops/fls64.h>
+	__asm__ ("%0.l = ONES %0;"
+		"%0 = %0.l (Z);"
+		: "=d" (res) : "d" (w));
+	return res;
+}
 
-#endif /* CONFIG_SMP */
+static inline unsigned int hweight64(__u64 w)
+{
+	return hweight32((unsigned int)(w >> 32)) + hweight32((unsigned int)w);
+}
+
+static inline unsigned int hweight16(unsigned int w)
+{
+	return hweight32(w & 0xffff);
+}
+
+static inline unsigned int hweight8(unsigned int w)
+{
+	return hweight32(w & 0xff);
+}
 
 #endif				/* _BLACKFIN_BITOPS_H */
diff --git a/arch/blackfin/include/asm/context.S b/arch/blackfin/include/asm/context.S
index 5dffaf582a22..1f9060395a0a 100644
--- a/arch/blackfin/include/asm/context.S
+++ b/arch/blackfin/include/asm/context.S
@@ -73,6 +73,11 @@
 #else
 	cli r0;
 #endif
+#ifdef CONFIG_TRACE_IRQFLAGS
+	sp += -12;
+	call _trace_hardirqs_off;
+	sp += 12;
+#endif
 	[--sp] = RETI;  /*orig_pc*/
 	/* Clear all L registers.  */
 	r0 = 0 (x);
@@ -279,6 +284,13 @@
 	RETN = [sp++];
 	RETX = [sp++];
 	RETI = [sp++];
+
+#ifdef CONFIG_TRACE_IRQFLAGS
+	sp += -12;
+	call _trace_hardirqs_on;
+	sp += 12;
+#endif
+
 	RETS = [sp++];
 
 #ifdef CONFIG_SMP
@@ -374,3 +386,13 @@
 
 	(R7:0, P5:0) = [SP++];
 .endm
+
+.macro pseudo_long_call func:req, scratch:req
+#ifdef CONFIG_ROMKERNEL
+	\scratch\().l = \func;
+	\scratch\().h = \func;
+	call (\scratch);
+#else
+	call \func;
+#endif
+.endm
diff --git a/arch/blackfin/include/asm/cpu.h b/arch/blackfin/include/asm/cpu.h
index b191dc662bd8..16883e582e3c 100644
--- a/arch/blackfin/include/asm/cpu.h
+++ b/arch/blackfin/include/asm/cpu.h
@@ -17,8 +17,6 @@ struct blackfin_cpudata {
 	struct task_struct *idle;
 	unsigned int imemctl;
 	unsigned int dmemctl;
-	unsigned long dcache_invld_count;
-	unsigned long icache_invld_count;
 };
 
 DECLARE_PER_CPU(struct blackfin_cpudata, cpu_data);
diff --git a/arch/blackfin/include/asm/def_LPBlackfin.h b/arch/blackfin/include/asm/def_LPBlackfin.h
index 25906468622f..f342ff0319df 100644
--- a/arch/blackfin/include/asm/def_LPBlackfin.h
+++ b/arch/blackfin/include/asm/def_LPBlackfin.h
@@ -12,6 +12,8 @@
 #include <mach/anomaly.h>
 
 #define MK_BMSK_(x) (1<<x)
+#define BFIN_DEPOSIT(mask, x)	(((x) << __ffs(mask)) & (mask))
+#define BFIN_EXTRACT(mask, x)	(((x) & (mask)) >> __ffs(mask))
 
 #ifndef __ASSEMBLY__
 
@@ -23,62 +25,30 @@
 # define NOP_PAD_ANOMALY_05000198
 #endif
 
-#define bfin_read8(addr) ({ \
-	uint32_t __v; \
+#define _bfin_readX(addr, size, asm_size, asm_ext) ({ \
+	u32 __v; \
 	__asm__ __volatile__( \
 		NOP_PAD_ANOMALY_05000198 \
-		"%0 = b[%1] (z);" \
+		"%0 = " #asm_size "[%1]" #asm_ext ";" \
 		: "=d" (__v) \
 		: "a" (addr) \
 	); \
 	__v; })
-
-#define bfin_read16(addr) ({ \
-	uint32_t __v; \
-	__asm__ __volatile__( \
-		NOP_PAD_ANOMALY_05000198 \
-		"%0 = w[%1] (z);" \
-		: "=d" (__v) \
-		: "a" (addr) \
-	); \
-	__v; })
-
-#define bfin_read32(addr) ({ \
-	uint32_t __v; \
-	__asm__ __volatile__( \
-		NOP_PAD_ANOMALY_05000198 \
-		"%0 = [%1];" \
-		: "=d" (__v) \
-		: "a" (addr) \
-	); \
-	__v; })
-
-#define bfin_write8(addr, val) \
+#define _bfin_writeX(addr, val, size, asm_size) \
 	__asm__ __volatile__( \
 		NOP_PAD_ANOMALY_05000198 \
-		"b[%0] = %1;" \
+		#asm_size "[%0] = %1;" \
 		: \
-		: "a" (addr), "d" ((uint8_t)(val)) \
+		: "a" (addr), "d" ((u##size)(val)) \
 		: "memory" \
 	)
 
-#define bfin_write16(addr, val) \
-	__asm__ __volatile__( \
-		NOP_PAD_ANOMALY_05000198 \
-		"w[%0] = %1;" \
-		: \
-		: "a" (addr), "d" ((uint16_t)(val)) \
-		: "memory" \
-	)
-
-#define bfin_write32(addr, val) \
-	__asm__ __volatile__( \
-		NOP_PAD_ANOMALY_05000198 \
-		"[%0] = %1;" \
-		: \
-		: "a" (addr), "d" (val) \
-		: "memory" \
-	)
+#define bfin_read8(addr)  _bfin_readX(addr,  8, b, (z))
+#define bfin_read16(addr) _bfin_readX(addr, 16, w, (z))
+#define bfin_read32(addr) _bfin_readX(addr, 32,  ,    )
+#define bfin_write8(addr, val)  _bfin_writeX(addr, val,  8, b)
+#define bfin_write16(addr, val) _bfin_writeX(addr, val, 16, w)
+#define bfin_write32(addr, val) _bfin_writeX(addr, val, 32,  )
 
 #endif /* __ASSEMBLY__ */
 
diff --git a/arch/blackfin/include/asm/delay.h b/arch/blackfin/include/asm/delay.h
index c31f91cc1d5d..171d8deb04a5 100644
--- a/arch/blackfin/include/asm/delay.h
+++ b/arch/blackfin/include/asm/delay.h
@@ -30,10 +30,22 @@ __asm__ __volatile__ (
 
 #define	HZSCALE		(268435456 / (1000000/HZ))
 
-static inline void udelay(unsigned long usecs)
+static inline unsigned long __to_delay(unsigned long scale)
 {
 	extern unsigned long loops_per_jiffy;
-	__delay((((usecs * HZSCALE) >> 11) * (loops_per_jiffy >> 11)) >> 6);
+	return (((scale * HZSCALE) >> 11) * (loops_per_jiffy >> 11)) >> 6;
+}
+
+static inline void udelay(unsigned long usecs)
+{
+	__delay(__to_delay(usecs));
 }
 
+static inline void ndelay(unsigned long nsecs)
+{
+	__delay(__to_delay(1) * nsecs / 1000);
+}
+
+#define ndelay ndelay
+
 #endif
diff --git a/arch/blackfin/include/asm/dma-mapping.h b/arch/blackfin/include/asm/dma-mapping.h
index f9172ff30e5c..212cb80fd74b 100644
--- a/arch/blackfin/include/asm/dma-mapping.h
+++ b/arch/blackfin/include/asm/dma-mapping.h
@@ -44,13 +44,8 @@ dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 extern void
 __dma_sync(dma_addr_t addr, size_t size, enum dma_data_direction dir);
 static inline void
-_dma_sync(dma_addr_t addr, size_t size, enum dma_data_direction dir)
+__dma_sync_inline(dma_addr_t addr, size_t size, enum dma_data_direction dir)
 {
-	if (!__builtin_constant_p(dir)) {
-		__dma_sync(addr, size, dir);
-		return;
-	}
-
 	switch (dir) {
 	case DMA_NONE:
 		BUG();
@@ -64,14 +59,15 @@ _dma_sync(dma_addr_t addr, size_t size, enum dma_data_direction dir)
 		break;
 	}
 }
+static inline void
+_dma_sync(dma_addr_t addr, size_t size, enum dma_data_direction dir)
+{
+	if (__builtin_constant_p(dir))
+		__dma_sync_inline(addr, size, dir);
+	else
+		__dma_sync(addr, size, dir);
+}
 
-/*
- * Map a single buffer of the indicated size for DMA in streaming mode.
- * The 32-bit bus address to use is returned.
- *
- * Once the device is given the dma address, the device owns this memory
- * until either pci_unmap_single or pci_dma_sync_single is performed.
- */
 static inline dma_addr_t
 dma_map_single(struct device *dev, void *ptr, size_t size,
 	       enum dma_data_direction dir)
@@ -88,14 +84,6 @@ dma_map_page(struct device *dev, struct page *page,
 	return dma_map_single(dev, page_address(page) + offset, size, dir);
 }
 
-/*
- * Unmap a single streaming mode DMA translation.  The dma_addr and size
- * must match what was provided for in a previous pci_map_single call.  All
- * other usages are undefined.
- *
- * After this call, reads by the cpu to the buffer are guarenteed to see
- * whatever the device wrote there.
- */
 static inline void
 dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 		 enum dma_data_direction dir)
@@ -110,30 +98,9 @@ dma_unmap_page(struct device *dev, dma_addr_t dma_addr, size_t size,
 	dma_unmap_single(dev, dma_addr, size, dir);
 }
 
-/*
- * Map a set of buffers described by scatterlist in streaming
- * mode for DMA.  This is the scather-gather version of the
- * above pci_map_single interface.  Here the scatter gather list
- * elements are each tagged with the appropriate dma address
- * and length.  They are obtained via sg_dma_{address,length}(SG).
- *
- * NOTE: An implementation may be able to use a smaller number of
- *       DMA address/length pairs than there are SG table elements.
- *       (for example via virtual mapping capabilities)
- *       The routine returns the number of addr/length pairs actually
- *       used, at most nents.
- *
- * Device ownership issues as mentioned above for pci_map_single are
- * the same here.
- */
 extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
 		      enum dma_data_direction dir);
 
-/*
- * Unmap a set of streaming mode DMA translations.
- * Again, cpu read rules concerning calls here are the same as for
- * pci_unmap_single() above.
- */
 static inline void
 dma_unmap_sg(struct device *dev, struct scatterlist *sg,
 	     int nhwentries, enum dma_data_direction dir)
diff --git a/arch/blackfin/include/asm/dma.h b/arch/blackfin/include/asm/dma.h
index bd2e62243abe..2c09b1d50ec9 100644
--- a/arch/blackfin/include/asm/dma.h
+++ b/arch/blackfin/include/asm/dma.h
@@ -262,6 +262,10 @@ static inline void dma_disable_irq(unsigned int channel)
 {
 	disable_irq(dma_ch[channel].irq);
 }
+static inline void dma_disable_irq_nosync(unsigned int channel)
+{
+	disable_irq_nosync(dma_ch[channel].irq);
+}
 static inline void dma_enable_irq(unsigned int channel)
 {
 	enable_irq(dma_ch[channel].irq);
diff --git a/arch/blackfin/include/asm/dpmc.h b/arch/blackfin/include/asm/dpmc.h
index 1597ae5041ee..efcc3aebeae4 100644
--- a/arch/blackfin/include/asm/dpmc.h
+++ b/arch/blackfin/include/asm/dpmc.h
@@ -75,7 +75,7 @@
 
 #define VLEV			0x00F0	/* Internal Voltage Level */
 #ifdef __ADSPBF52x__
-#define VLEV_085 		0x0040	/* VLEV = 0.85 V (-5% - +10% Accuracy) */
+#define VLEV_085		0x0040	/* VLEV = 0.85 V (-5% - +10% Accuracy) */
 #define VLEV_090		0x0050	/* VLEV = 0.90 V (-5% - +10% Accuracy) */
 #define VLEV_095		0x0060	/* VLEV = 0.95 V (-5% - +10% Accuracy) */
 #define VLEV_100		0x0070	/* VLEV = 1.00 V (-5% - +10% Accuracy) */
@@ -84,7 +84,7 @@
 #define VLEV_115		0x00A0	/* VLEV = 1.15 V (-5% - +10% Accuracy) */
 #define VLEV_120		0x00B0	/* VLEV = 1.20 V (-5% - +10% Accuracy) */
 #else
-#define VLEV_085 		0x0060	/* VLEV = 0.85 V (-5% - +10% Accuracy) */
+#define VLEV_085		0x0060	/* VLEV = 0.85 V (-5% - +10% Accuracy) */
 #define VLEV_090		0x0070	/* VLEV = 0.90 V (-5% - +10% Accuracy) */
 #define VLEV_095		0x0080	/* VLEV = 0.95 V (-5% - +10% Accuracy) */
 #define VLEV_100		0x0090	/* VLEV = 1.00 V (-5% - +10% Accuracy) */
diff --git a/arch/blackfin/include/asm/elf.h b/arch/blackfin/include/asm/elf.h
index 5b50f0ecacf8..117713adea7f 100644
--- a/arch/blackfin/include/asm/elf.h
+++ b/arch/blackfin/include/asm/elf.h
@@ -22,12 +22,15 @@
 #define EF_BFIN_CODE_IN_L2	0x00000040	/* --code-in-l2 */
 #define EF_BFIN_DATA_IN_L2	0x00000080	/* --data-in-l2 */
 
+#if 1	/* core dumps not supported, but linux/elfcore.h needs these */
 typedef unsigned long elf_greg_t;
 
-#define ELF_NGREG 40 /* (sizeof(struct user_regs_struct) / sizeof(elf_greg_t)) */
+#define ELF_NGREG (sizeof(struct pt_regs) / sizeof(elf_greg_t))
 typedef elf_greg_t elf_gregset_t[ELF_NGREG];
 
 typedef struct { } elf_fpregset_t;
+#endif
+
 /*
  * This is used to ensure we don't load something for the wrong architecture.
  */
@@ -55,6 +58,9 @@ do {											\
 	_regs->p2	= _dynamic_addr;				\
 } while(0)
 
+#if 0
+#define CORE_DUMP_USE_REGSET
+#endif
 #define ELF_FDPIC_CORE_EFLAGS	EF_BFIN_FDPIC
 #define ELF_EXEC_PAGESIZE	4096
 
diff --git a/arch/blackfin/include/asm/ftrace.h b/arch/blackfin/include/asm/ftrace.h
index 90c9b400ba6d..4cfe2d9ba7e8 100644
--- a/arch/blackfin/include/asm/ftrace.h
+++ b/arch/blackfin/include/asm/ftrace.h
@@ -10,4 +10,57 @@
 
 #define MCOUNT_INSN_SIZE	6 /* sizeof "[++sp] = rets; call __mcount;" */
 
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_FRAME_POINTER
+#include <linux/mm.h>
+
+extern inline void *return_address(unsigned int level)
+{
+	unsigned long *endstack, *fp, *ret_addr;
+	unsigned int current_level = 0;
+
+	if (level == 0)
+		return __builtin_return_address(0);
+
+	fp = (unsigned long *)__builtin_frame_address(0);
+	endstack = (unsigned long *)PAGE_ALIGN((unsigned long)&level);
+
+	while (((unsigned long)fp & 0x3) == 0 && fp &&
+	       (fp + 1) < endstack && current_level < level) {
+		fp = (unsigned long *)*fp;
+		current_level++;
+	}
+
+	if (((unsigned long)fp & 0x3) == 0 && fp &&
+	    (fp + 1) < endstack)
+		ret_addr = (unsigned long *)*(fp + 1);
+	else
+		ret_addr = NULL;
+
+	return ret_addr;
+}
+
+#else
+
+extern inline void *return_address(unsigned int level)
+{
+	return NULL;
+}
+
+#endif /* CONFIG_FRAME_POINTER */
+
+#define HAVE_ARCH_CALLER_ADDR
+
+/* inline function or macro may lead to unexpected result */
+#define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0))
+#define CALLER_ADDR1 ((unsigned long)return_address(1))
+#define CALLER_ADDR2 ((unsigned long)return_address(2))
+#define CALLER_ADDR3 ((unsigned long)return_address(3))
+#define CALLER_ADDR4 ((unsigned long)return_address(4))
+#define CALLER_ADDR5 ((unsigned long)return_address(5))
+#define CALLER_ADDR6 ((unsigned long)return_address(6))
+
+#endif /* __ASSEMBLY__ */
+
 #endif
diff --git a/arch/blackfin/include/asm/gpio.h b/arch/blackfin/include/asm/gpio.h
index 539468a05057..91bd2d7b9d55 100644
--- a/arch/blackfin/include/asm/gpio.h
+++ b/arch/blackfin/include/asm/gpio.h
@@ -70,6 +70,8 @@
 
 #ifndef __ASSEMBLY__
 
+#include <linux/compiler.h>
+
 /***********************************************************
 *
 * FUNCTIONS: Blackfin General Purpose Ports Access Functions
@@ -223,6 +225,9 @@ int bfin_gpio_direction_output(unsigned gpio, int value);
 int bfin_gpio_get_value(unsigned gpio);
 void bfin_gpio_set_value(unsigned gpio, int value);
 
+#include <asm/irq.h>
+#include <asm/errno.h>
+
 #ifdef CONFIG_GPIOLIB
 #include <asm-generic/gpio.h>		/* cansleep wrappers */
 
@@ -247,6 +252,11 @@ static inline int gpio_cansleep(unsigned int gpio)
 	return __gpio_cansleep(gpio);
 }
 
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return __gpio_to_irq(gpio);
+}
+
 #else /* !CONFIG_GPIOLIB */
 
 static inline int gpio_request(unsigned gpio, const char *label)
@@ -279,10 +289,6 @@ static inline void gpio_set_value(unsigned gpio, int value)
 	return bfin_gpio_set_value(gpio, value);
 }
 
-#include <asm-generic/gpio.h>		/* cansleep wrappers */
-#endif	/* !CONFIG_GPIOLIB */
-#include <asm/irq.h>
-
 static inline int gpio_to_irq(unsigned gpio)
 {
 	if (likely(gpio < MAX_BLACKFIN_GPIOS))
@@ -291,6 +297,9 @@ static inline int gpio_to_irq(unsigned gpio)
 	return -EINVAL;
 }
 
+#include <asm-generic/gpio.h>		/* cansleep wrappers */
+#endif	/* !CONFIG_GPIOLIB */
+
 static inline int irq_to_gpio(unsigned irq)
 {
 	return (irq - GPIO_IRQ_BASE);
diff --git a/arch/blackfin/include/asm/irq.h b/arch/blackfin/include/asm/irq.h
index e7c0623f9091..12f4060a31b0 100644
--- a/arch/blackfin/include/asm/irq.h
+++ b/arch/blackfin/include/asm/irq.h
@@ -12,6 +12,9 @@
 
 #include <linux/irqflags.h>
 
+/* IRQs that may be used by external irq_chip controllers */
+#define NR_SPARE_IRQS	32
+
 #include <mach/anomaly.h>
 
 /* SYS_IRQS and NR_IRQS are defined in <mach-bf5xx/irq.h> */
@@ -35,4 +38,8 @@
 
 #include <asm-generic/irq.h>
 
+#ifdef CONFIG_NMI_WATCHDOG
+# define ARCH_HAS_NMI_WATCHDOG
+#endif
+
 #endif				/* _BFIN_IRQ_H_ */
diff --git a/arch/blackfin/include/asm/mmu_context.h b/arch/blackfin/include/asm/mmu_context.h
index ae8ef4ffd806..7f363d7e43a5 100644
--- a/arch/blackfin/include/asm/mmu_context.h
+++ b/arch/blackfin/include/asm/mmu_context.h
@@ -13,6 +13,7 @@
 #include <asm/page.h>
 #include <asm/pgalloc.h>
 #include <asm/cplbinit.h>
+#include <asm/sections.h>
 
 /* Note: L1 stacks are CPU-private things, so we bluntly disable this
    feature in SMP mode, and use the per-CPU scratch SRAM bank only to
@@ -117,9 +118,16 @@ static inline void protect_page(struct mm_struct *mm, unsigned long addr,
 				unsigned long flags)
 {
 	unsigned long *mask = mm->context.page_rwx_mask;
-	unsigned long page = addr >> 12;
-	unsigned long idx = page >> 5;
-	unsigned long bit = 1 << (page & 31);
+	unsigned long page;
+	unsigned long idx;
+	unsigned long bit;
+
+	if (unlikely(addr >= ASYNC_BANK0_BASE && addr < ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE))
+		page = (addr - (ASYNC_BANK0_BASE - _ramend)) >> 12;
+	else
+		page = addr >> 12;
+	idx = page >> 5;
+	bit = 1 << (page & 31);
 
 	if (flags & VM_READ)
 		mask[idx] |= bit;
diff --git a/arch/blackfin/include/asm/nand.h b/arch/blackfin/include/asm/nand.h
index 3ae8b569edfc..3a1e79dfc8d9 100644
--- a/arch/blackfin/include/asm/nand.h
+++ b/arch/blackfin/include/asm/nand.h
@@ -1,5 +1,5 @@
 /*
- * BF5XX - NAND flash controller platfrom_device info
+ * BF5XX - NAND flash controller platform_device info
  *
  * Copyright 2007-2008 Analog Devices, Inc.
  *
@@ -8,7 +8,7 @@
 
 /* struct bf5xx_nand_platform
  *
- * define a interface between platfrom board specific code and
+ * define a interface between platform board specific code and
  * bf54x NFC driver.
  *
  * nr_partitions = number of partitions pointed to be partitoons (or zero)
diff --git a/arch/blackfin/include/asm/nmi.h b/arch/blackfin/include/asm/nmi.h
new file mode 100644
index 000000000000..b9caac4fcfd8
--- /dev/null
+++ b/arch/blackfin/include/asm/nmi.h
@@ -0,0 +1,12 @@
+/*
+ * Copyright 2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2
+ */
+
+#ifndef _BFIN_NMI_H_
+#define _BFIN_NMI_H_
+
+#include <linux/nmi.h>
+
+#endif
diff --git a/arch/blackfin/include/asm/page.h b/arch/blackfin/include/asm/page.h
index 1d04e4078340..d0ce975bcd48 100644
--- a/arch/blackfin/include/asm/page.h
+++ b/arch/blackfin/include/asm/page.h
@@ -15,4 +15,7 @@
 	((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0 ) | \
 		 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
 
+#include <asm-generic/memory_model.h>
+#include <asm-generic/getorder.h>
+
 #endif
diff --git a/arch/blackfin/include/asm/ptrace.h b/arch/blackfin/include/asm/ptrace.h
index b33a4488f498..aaa1c6c2bc19 100644
--- a/arch/blackfin/include/asm/ptrace.h
+++ b/arch/blackfin/include/asm/ptrace.h
@@ -24,6 +24,8 @@
 
 #ifndef __ASSEMBLY__
 
+struct task_struct;
+
 /* this struct defines the way the registers are stored on the
    stack during a system call. */
 
@@ -101,9 +103,30 @@ struct pt_regs {
    master interrupt enable.  */
 #define user_mode(regs) (!(((regs)->ipend & ~0x10) & (((regs)->ipend & ~0x10) - 1)))
 #define instruction_pointer(regs) ((regs)->pc)
+#define user_stack_pointer(regs)  ((regs)->usp)
 #define profile_pc(regs) instruction_pointer(regs)
 extern void show_regs(struct pt_regs *);
 
+#define arch_has_single_step()	(1)
+extern void user_enable_single_step(struct task_struct *child);
+extern void user_disable_single_step(struct task_struct *child);
+/* common code demands this function */
+#define ptrace_disable(child) user_disable_single_step(child)
+
+/*
+ * Get the address of the live pt_regs for the specified task.
+ * These are saved onto the top kernel stack when the process
+ * is not running.
+ *
+ * Note: if a user thread is execve'd from kernel space, the
+ * kernel stack will not be empty on entry to the kernel, so
+ * ptracing these tasks will fail.
+ */
+#define task_pt_regs(task) \
+	(struct pt_regs *) \
+	    ((unsigned long)task_stack_page(task) + \
+	     (THREAD_SIZE - sizeof(struct pt_regs)))
+
 #endif  /*  __KERNEL__  */
 
 #endif				/* __ASSEMBLY__ */
@@ -173,4 +196,6 @@ extern void show_regs(struct pt_regs *);
 #define PT_FDPIC_EXEC 232
 #define PT_FDPIC_INTERP 236
 
+#define PT_LAST_PSEUDO PT_FDPIC_INTERP
+
 #endif				/* _BFIN_PTRACE_H */
diff --git a/arch/blackfin/include/asm/sections.h b/arch/blackfin/include/asm/sections.h
index 42f6c53c59c6..14a3e66d9167 100644
--- a/arch/blackfin/include/asm/sections.h
+++ b/arch/blackfin/include/asm/sections.h
@@ -21,6 +21,9 @@ extern unsigned long memory_start, memory_end, physical_mem_end;
 extern char _stext_l1[], _etext_l1[], _text_l1_lma[], __weak _text_l1_len[];
 extern char _sdata_l1[], _edata_l1[], _sbss_l1[], _ebss_l1[],
 	_data_l1_lma[], __weak _data_l1_len[];
+#ifdef CONFIG_ROMKERNEL
+extern char _data_lma[], _data_len[], _sinitdata[], _einitdata[], _init_data_lma[], _init_data_len[];
+#endif
 extern char _sdata_b_l1[], _edata_b_l1[], _sbss_b_l1[], _ebss_b_l1[],
 	_data_b_l1_lma[], __weak _data_b_l1_len[];
 extern char _stext_l2[], _etext_l2[], _sdata_l2[], _edata_l2[],
diff --git a/arch/blackfin/include/asm/smp.h b/arch/blackfin/include/asm/smp.h
index 6a0fe94b84a6..f5b537967116 100644
--- a/arch/blackfin/include/asm/smp.h
+++ b/arch/blackfin/include/asm/smp.h
@@ -22,8 +22,23 @@ extern char coreb_trampoline_start, coreb_trampoline_end;
 struct corelock_slot {
 	int lock;
 };
+extern struct corelock_slot corelock;
+
+#ifdef __ARCH_SYNC_CORE_ICACHE
+extern unsigned long icache_invld_count[NR_CPUS];
+#endif
+#ifdef __ARCH_SYNC_CORE_DCACHE
+extern unsigned long dcache_invld_count[NR_CPUS];
+#endif
 
 void smp_icache_flush_range_others(unsigned long start,
 				   unsigned long end);
+#ifdef CONFIG_HOTPLUG_CPU
+void coreb_sleep(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
+void cpu_die(void);
+void platform_cpu_die(void);
+int __cpu_disable(void);
+int __cpu_die(unsigned int cpu);
+#endif
 
 #endif /* !__ASM_BLACKFIN_SMP_H */
diff --git a/arch/blackfin/include/asm/syscall.h b/arch/blackfin/include/asm/syscall.h
new file mode 100644
index 000000000000..4921a4815cce
--- /dev/null
+++ b/arch/blackfin/include/asm/syscall.h
@@ -0,0 +1,96 @@
+/*
+ * Magic syscall break down functions
+ *
+ * Copyright 2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ASM_BLACKFIN_SYSCALL_H__
+#define __ASM_BLACKFIN_SYSCALL_H__
+
+/*
+ * Blackfin syscalls are simple:
+ *	enter:
+ *		p0: syscall number
+ *		r{0,1,2,3,4,5}: syscall args 0,1,2,3,4,5
+ *	exit:
+ *		r0: return/error value
+ */
+
+#include <linux/err.h>
+#include <linux/sched.h>
+#include <asm/ptrace.h>
+
+static inline long
+syscall_get_nr(struct task_struct *task, struct pt_regs *regs)
+{
+	return regs->p0;
+}
+
+static inline void
+syscall_rollback(struct task_struct *task, struct pt_regs *regs)
+{
+	regs->p0 = regs->orig_p0;
+}
+
+static inline long
+syscall_get_error(struct task_struct *task, struct pt_regs *regs)
+{
+	return IS_ERR_VALUE(regs->r0) ? regs->r0 : 0;
+}
+
+static inline long
+syscall_get_return_value(struct task_struct *task, struct pt_regs *regs)
+{
+	return regs->r0;
+}
+
+static inline void
+syscall_set_return_value(struct task_struct *task, struct pt_regs *regs,
+                         int error, long val)
+{
+	regs->r0 = error ? -error : val;
+}
+
+/**
+ *	syscall_get_arguments()
+ *	@task:   unused
+ *	@regs:   the register layout to extract syscall arguments from
+ *	@i:      first syscall argument to extract
+ *	@n:      number of syscall arguments to extract
+ *	@args:   array to return the syscall arguments in
+ *
+ * args[0] gets i'th argument, args[n - 1] gets the i+n-1'th argument
+ */
+static inline void
+syscall_get_arguments(struct task_struct *task, struct pt_regs *regs,
+                      unsigned int i, unsigned int n, unsigned long *args)
+{
+	/*
+	 * Assume the ptrace layout doesn't change -- r5 is first in memory,
+	 * then r4, ..., then r0.  So we simply reverse the ptrace register
+	 * array in memory to store into the args array.
+	 */
+	long *aregs = &regs->r0 - i;
+
+	BUG_ON(i > 5 || i + n > 6);
+
+	while (n--)
+		*args++ = *aregs--;
+}
+
+/* See syscall_get_arguments() comments */
+static inline void
+syscall_set_arguments(struct task_struct *task, struct pt_regs *regs,
+                      unsigned int i, unsigned int n, const unsigned long *args)
+{
+	long *aregs = &regs->r0 - i;
+
+	BUG_ON(i > 5 || i + n > 6);
+
+	while (n--)
+		*aregs-- = *args++;
+}
+
+#endif
diff --git a/arch/blackfin/include/asm/thread_info.h b/arch/blackfin/include/asm/thread_info.h
index a40d9368c38a..e9a5614cdbb1 100644
--- a/arch/blackfin/include/asm/thread_info.h
+++ b/arch/blackfin/include/asm/thread_info.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2004-2009 Analog Devices Inc.
+ * Copyright 2004-2010 Analog Devices Inc.
  *
  * Licensed under the GPL-2 or later.
  */
@@ -17,7 +17,7 @@
 /* Thread Align Mask to reach to the top of the stack
  * for any process
  */
-#define ALIGN_PAGE_MASK         0xffffe000
+#define ALIGN_PAGE_MASK		0xffffe000
 
 /*
  * Size of kernel stack for each process. This must be a power of 2...
@@ -57,7 +57,7 @@ struct thread_info {
 	.exec_domain	= &default_exec_domain,	\
 	.flags		= 0,			\
 	.cpu		= 0,			\
-	.preempt_count  = INIT_PREEMPT_COUNT,   \
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
 	.restart_block	= {			\
 		.fn = do_no_restart_syscall,	\
 	},					\
@@ -73,8 +73,7 @@ __attribute_const__
 static inline struct thread_info *current_thread_info(void)
 {
 	struct thread_info *ti;
-      __asm__("%0 = sp;" : "=da"(ti) :
-	);
+	__asm__("%0 = sp;" : "=da"(ti));
 	return (struct thread_info *)((long)ti & ~((long)THREAD_SIZE-1));
 }
 
@@ -99,21 +98,23 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_NEED_RESCHED	2	/* rescheduling necessary */
 #define TIF_POLLING_NRFLAG	3	/* true if poll_idle() is polling
 					   TIF_NEED_RESCHED */
-#define TIF_MEMDIE              4
+#define TIF_MEMDIE		4
 #define TIF_RESTORE_SIGMASK	5	/* restore signal mask in do_signal() */
-#define TIF_FREEZE              6       /* is freezing for suspend */
-#define TIF_IRQ_SYNC            7       /* sync pipeline stage */
-#define TIF_NOTIFY_RESUME       8       /* callback before returning to user */
+#define TIF_FREEZE		6	/* is freezing for suspend */
+#define TIF_IRQ_SYNC		7	/* sync pipeline stage */
+#define TIF_NOTIFY_RESUME	8	/* callback before returning to user */
+#define TIF_SINGLESTEP		9
 
 /* as above, but as bit values */
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
 #define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
-#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
 #define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
 #define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
-#define _TIF_FREEZE             (1<<TIF_FREEZE)
-#define _TIF_IRQ_SYNC           (1<<TIF_IRQ_SYNC)
+#define _TIF_FREEZE		(1<<TIF_FREEZE)
+#define _TIF_IRQ_SYNC		(1<<TIF_IRQ_SYNC)
+#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
+#define _TIF_SINGLESTEP		(1<<TIF_SINGLESTEP)
 
 #define _TIF_WORK_MASK		0x0000FFFE	/* work to do on interrupt/exception return */
 
diff --git a/arch/blackfin/include/asm/time.h b/arch/blackfin/include/asm/time.h
index 589e937ed1eb..9ca7db844d10 100644
--- a/arch/blackfin/include/asm/time.h
+++ b/arch/blackfin/include/asm/time.h
@@ -23,9 +23,7 @@
  */
 
 #ifndef CONFIG_CPU_FREQ
-#define TIME_SCALE 1
-#define __bfin_cycles_off (0)
-#define __bfin_cycles_mod (0)
+# define TIME_SCALE 1
 #else
 /*
  * Blackfin CPU frequency scaling supports max Core Clock 1, 1/2 and 1/4 .
@@ -33,9 +31,16 @@
  * adjust the Core Timer Presale Register. This way we don't lose time.
  */
 #define TIME_SCALE 4
+
+# ifdef CONFIG_CYCLES_CLOCKSOURCE
 extern unsigned long long __bfin_cycles_off;
 extern unsigned int __bfin_cycles_mod;
+# endif
+#endif
+
+#if defined(CONFIG_TICKSOURCE_CORETMR)
+extern void bfin_coretmr_init(void);
+extern void bfin_coretmr_clockevent_init(void);
 #endif
 
-extern void __init setup_core_timer(void);
 #endif
diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile
index a8ddbc8ed5af..346a421f1562 100644
--- a/arch/blackfin/kernel/Makefile
+++ b/arch/blackfin/kernel/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_CPLB_INFO)              += cplbinfo.o
 obj-$(CONFIG_MODULES)                += module.o
 obj-$(CONFIG_KGDB)                   += kgdb.o
 obj-$(CONFIG_KGDB_TESTS)             += kgdb_test.o
+obj-$(CONFIG_NMI_WATCHDOG)           += nmi.o
 obj-$(CONFIG_EARLY_PRINTK)           += early_printk.o
 obj-$(CONFIG_EARLY_PRINTK)           += shadow_console.o
 obj-$(CONFIG_STACKTRACE)             += stacktrace.o
diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c
index 924c00286bab..26403d1c9e65 100644
--- a/arch/blackfin/kernel/bfin_dma_5xx.c
+++ b/arch/blackfin/kernel/bfin_dma_5xx.c
@@ -91,7 +91,7 @@ late_initcall(proc_dma_init);
  */
 int request_dma(unsigned int channel, const char *device_id)
 {
-	pr_debug("request_dma() : BEGIN \n");
+	pr_debug("request_dma() : BEGIN\n");
 
 	if (device_id == NULL)
 		printk(KERN_WARNING "request_dma(%u): no device_id given\n", channel);
@@ -107,7 +107,7 @@ int request_dma(unsigned int channel, const char *device_id)
 #endif
 
 	if (atomic_cmpxchg(&dma_ch[channel].chan_status, 0, 1)) {
-		pr_debug("DMA CHANNEL IN USE  \n");
+		pr_debug("DMA CHANNEL IN USE\n");
 		return -EBUSY;
 	}
 
@@ -131,7 +131,7 @@ int request_dma(unsigned int channel, const char *device_id)
 	 * you have to request DMA, before doing any operations on
 	 * descriptor/channel
 	 */
-	pr_debug("request_dma() : END  \n");
+	pr_debug("request_dma() : END\n");
 	return 0;
 }
 EXPORT_SYMBOL(request_dma);
@@ -171,7 +171,7 @@ static void clear_dma_buffer(unsigned int channel)
 
 void free_dma(unsigned int channel)
 {
-	pr_debug("freedma() : BEGIN \n");
+	pr_debug("freedma() : BEGIN\n");
 	BUG_ON(channel >= MAX_DMA_CHANNELS ||
 			!atomic_read(&dma_ch[channel].chan_status));
 
@@ -185,7 +185,7 @@ void free_dma(unsigned int channel)
 	/* Clear the DMA Variable in the Channel */
 	atomic_set(&dma_ch[channel].chan_status, 0);
 
-	pr_debug("freedma() : END \n");
+	pr_debug("freedma() : END\n");
 }
 EXPORT_SYMBOL(free_dma);
 
diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c
index a174596cc009..e35e20f00d9b 100644
--- a/arch/blackfin/kernel/bfin_gpio.c
+++ b/arch/blackfin/kernel/bfin_gpio.c
@@ -1289,44 +1289,50 @@ __initcall(gpio_register_proc);
 #endif
 
 #ifdef CONFIG_GPIOLIB
-int bfin_gpiolib_direction_input(struct gpio_chip *chip, unsigned gpio)
+static int bfin_gpiolib_direction_input(struct gpio_chip *chip, unsigned gpio)
 {
 	return bfin_gpio_direction_input(gpio);
 }
 
-int bfin_gpiolib_direction_output(struct gpio_chip *chip, unsigned gpio, int level)
+static int bfin_gpiolib_direction_output(struct gpio_chip *chip, unsigned gpio, int level)
 {
 	return bfin_gpio_direction_output(gpio, level);
 }
 
-int bfin_gpiolib_get_value(struct gpio_chip *chip, unsigned gpio)
+static int bfin_gpiolib_get_value(struct gpio_chip *chip, unsigned gpio)
 {
 	return bfin_gpio_get_value(gpio);
 }
 
-void bfin_gpiolib_set_value(struct gpio_chip *chip, unsigned gpio, int value)
+static void bfin_gpiolib_set_value(struct gpio_chip *chip, unsigned gpio, int value)
 {
 	return bfin_gpio_set_value(gpio, value);
 }
 
-int bfin_gpiolib_gpio_request(struct gpio_chip *chip, unsigned gpio)
+static int bfin_gpiolib_gpio_request(struct gpio_chip *chip, unsigned gpio)
 {
 	return bfin_gpio_request(gpio, chip->label);
 }
 
-void bfin_gpiolib_gpio_free(struct gpio_chip *chip, unsigned gpio)
+static void bfin_gpiolib_gpio_free(struct gpio_chip *chip, unsigned gpio)
 {
 	return bfin_gpio_free(gpio);
 }
 
+static int bfin_gpiolib_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
+{
+	return gpio + GPIO_IRQ_BASE;
+}
+
 static struct gpio_chip bfin_chip = {
-	.label			= "Blackfin-GPIOlib",
+	.label			= "BFIN-GPIO",
 	.direction_input	= bfin_gpiolib_direction_input,
 	.get			= bfin_gpiolib_get_value,
 	.direction_output	= bfin_gpiolib_direction_output,
 	.set			= bfin_gpiolib_set_value,
 	.request		= bfin_gpiolib_gpio_request,
 	.free			= bfin_gpiolib_gpio_free,
+	.to_irq			= bfin_gpiolib_gpio_to_irq,
 	.base			= 0,
 	.ngpio			= MAX_BLACKFIN_GPIOS,
 };
diff --git a/arch/blackfin/kernel/cplb-mpu/cplbinit.c b/arch/blackfin/kernel/cplb-mpu/cplbinit.c
index 8d42b9e50dfa..30fd6417f069 100644
--- a/arch/blackfin/kernel/cplb-mpu/cplbinit.c
+++ b/arch/blackfin/kernel/cplb-mpu/cplbinit.c
@@ -64,6 +64,15 @@ void __init generate_cplb_tables_cpu(unsigned int cpu)
 		icplb_tbl[cpu][i_i++].data = i_data | (addr == 0 ? CPLB_USER_RD : 0);
 	}
 
+#ifdef CONFIG_ROMKERNEL
+	/* Cover kernel XIP flash area */
+	addr = CONFIG_ROM_BASE & ~(4 * 1024 * 1024 - 1);
+	dcplb_tbl[cpu][i_d].addr = addr;
+	dcplb_tbl[cpu][i_d++].data = d_data | CPLB_USER_RD;
+	icplb_tbl[cpu][i_i].addr = addr;
+	icplb_tbl[cpu][i_i++].data = i_data | CPLB_USER_RD;
+#endif
+
 	/* Cover L1 memory.  One 4M area for code and data each is enough.  */
 #if L1_DATA_A_LENGTH > 0 || L1_DATA_B_LENGTH > 0
 	dcplb_tbl[cpu][i_d].addr = get_l1_data_a_start_cpu(cpu);
diff --git a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c
index 930c01c06813..87b25b1b30ed 100644
--- a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c
+++ b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c
@@ -31,6 +31,12 @@ int nr_dcplb_miss[NR_CPUS], nr_icplb_miss[NR_CPUS];
 int nr_icplb_supv_miss[NR_CPUS], nr_dcplb_prot[NR_CPUS];
 int nr_cplb_flush[NR_CPUS];
 
+#ifdef CONFIG_EXCPT_IRQ_SYSC_L1
+#define MGR_ATTR __attribute__((l1_text))
+#else
+#define MGR_ATTR
+#endif
+
 /*
  * Given the contents of the status register, return the index of the
  * CPLB that caused the fault.
@@ -59,7 +65,7 @@ static int icplb_rr_index[NR_CPUS], dcplb_rr_index[NR_CPUS];
 /*
  * Find an ICPLB entry to be evicted and return its index.
  */
-static int evict_one_icplb(unsigned int cpu)
+MGR_ATTR static int evict_one_icplb(unsigned int cpu)
 {
 	int i;
 	for (i = first_switched_icplb; i < MAX_CPLBS; i++)
@@ -74,7 +80,7 @@ static int evict_one_icplb(unsigned int cpu)
 	return i;
 }
 
-static int evict_one_dcplb(unsigned int cpu)
+MGR_ATTR static int evict_one_dcplb(unsigned int cpu)
 {
 	int i;
 	for (i = first_switched_dcplb; i < MAX_CPLBS; i++)
@@ -89,7 +95,7 @@ static int evict_one_dcplb(unsigned int cpu)
 	return i;
 }
 
-static noinline int dcplb_miss(unsigned int cpu)
+MGR_ATTR static noinline int dcplb_miss(unsigned int cpu)
 {
 	unsigned long addr = bfin_read_DCPLB_FAULT_ADDR();
 	int status = bfin_read_DCPLB_STATUS();
@@ -114,10 +120,15 @@ static noinline int dcplb_miss(unsigned int cpu)
 		d_data = L2_DMEMORY;
 	} else if (addr >= physical_mem_end) {
 		if (addr >= ASYNC_BANK0_BASE && addr < ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE) {
-			addr &= ~(4 * 1024 * 1024 - 1);
-			d_data &= ~PAGE_SIZE_4KB;
-			d_data |= PAGE_SIZE_4MB;
-			d_data |= CPLB_USER_RD | CPLB_USER_WR;
+			mask = current_rwx_mask[cpu];
+			if (mask) {
+				int page = (addr - (ASYNC_BANK0_BASE - _ramend)) >> PAGE_SHIFT;
+				int idx = page >> 5;
+				int bit = 1 << (page & 31);
+
+				if (mask[idx] & bit)
+					d_data |= CPLB_USER_RD;
+			}
 		} else if (addr >= BOOT_ROM_START && addr < BOOT_ROM_START + BOOT_ROM_LENGTH
 		    && (status & (FAULT_RW | FAULT_USERSUPV)) == FAULT_USERSUPV) {
 			addr &= ~(1 * 1024 * 1024 - 1);
@@ -126,7 +137,9 @@ static noinline int dcplb_miss(unsigned int cpu)
 		} else
 			return CPLB_PROT_VIOL;
 	} else if (addr >= _ramend) {
-	    d_data |= CPLB_USER_RD | CPLB_USER_WR;
+		d_data |= CPLB_USER_RD | CPLB_USER_WR;
+		if (reserved_mem_dcache_on)
+			d_data |= CPLB_L1_CHBL;
 	} else {
 		mask = current_rwx_mask[cpu];
 		if (mask) {
@@ -156,7 +169,7 @@ static noinline int dcplb_miss(unsigned int cpu)
 	return 0;
 }
 
-static noinline int icplb_miss(unsigned int cpu)
+MGR_ATTR static noinline int icplb_miss(unsigned int cpu)
 {
 	unsigned long addr = bfin_read_ICPLB_FAULT_ADDR();
 	int status = bfin_read_ICPLB_STATUS();
@@ -204,10 +217,19 @@ static noinline int icplb_miss(unsigned int cpu)
 		i_data = L2_IMEMORY;
 	} else if (addr >= physical_mem_end) {
 		if (addr >= ASYNC_BANK0_BASE && addr < ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE) {
-			addr &= ~(4 * 1024 * 1024 - 1);
-			i_data &= ~PAGE_SIZE_4KB;
-			i_data |= PAGE_SIZE_4MB;
-			i_data |= CPLB_USER_RD;
+			if (!(status & FAULT_USERSUPV)) {
+				unsigned long *mask = current_rwx_mask[cpu];
+
+				if (mask) {
+					int page = (addr - (ASYNC_BANK0_BASE - _ramend)) >> PAGE_SHIFT;
+					int idx = page >> 5;
+					int bit = 1 << (page & 31);
+
+					mask += 2 * page_mask_nelts;
+					if (mask[idx] & bit)
+						i_data |= CPLB_USER_RD;
+				}
+			}
 		} else if (addr >= BOOT_ROM_START && addr < BOOT_ROM_START + BOOT_ROM_LENGTH
 		    && (status & FAULT_USERSUPV)) {
 			addr &= ~(1 * 1024 * 1024 - 1);
@@ -217,6 +239,8 @@ static noinline int icplb_miss(unsigned int cpu)
 		    return CPLB_PROT_VIOL;
 	} else if (addr >= _ramend) {
 		i_data |= CPLB_USER_RD;
+		if (reserved_mem_icache_on)
+			i_data |= CPLB_L1_CHBL;
 	} else {
 		/*
 		 * Two cases to distinguish - a supervisor access must
@@ -251,7 +275,7 @@ static noinline int icplb_miss(unsigned int cpu)
 	return 0;
 }
 
-static noinline int dcplb_protection_fault(unsigned int cpu)
+MGR_ATTR static noinline int dcplb_protection_fault(unsigned int cpu)
 {
 	int status = bfin_read_DCPLB_STATUS();
 
@@ -271,7 +295,7 @@ static noinline int dcplb_protection_fault(unsigned int cpu)
 	return CPLB_PROT_VIOL;
 }
 
-int cplb_hdr(int seqstat, struct pt_regs *regs)
+MGR_ATTR int cplb_hdr(int seqstat, struct pt_regs *regs)
 {
 	int cause = seqstat & 0x3f;
 	unsigned int cpu = raw_smp_processor_id();
diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
index 282a7919821b..bfe75af4e8bd 100644
--- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c
+++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
@@ -56,6 +56,15 @@ void __init generate_cplb_tables_cpu(unsigned int cpu)
 		i_tbl[i_i++].data = SDRAM_IGENERIC | PAGE_SIZE_4MB;
 	}
 
+#ifdef CONFIG_ROMKERNEL
+	/* Cover kernel XIP flash area */
+	addr = CONFIG_ROM_BASE & ~(4 * 1024 * 1024 - 1);
+	d_tbl[i_d].addr = addr;
+	d_tbl[i_d++].data = SDRAM_DGENERIC | PAGE_SIZE_4MB;
+	i_tbl[i_i].addr = addr;
+	i_tbl[i_i++].data = SDRAM_IGENERIC | PAGE_SIZE_4MB;
+#endif
+
 	/* Cover L1 memory.  One 4M area for code and data each is enough.  */
 	if (cpu == 0) {
 		if (L1_DATA_A_LENGTH || L1_DATA_B_LENGTH) {
diff --git a/arch/blackfin/kernel/dma-mapping.c b/arch/blackfin/kernel/dma-mapping.c
index e937f323d82c..04ddcfeb7981 100644
--- a/arch/blackfin/kernel/dma-mapping.c
+++ b/arch/blackfin/kernel/dma-mapping.c
@@ -116,7 +116,7 @@ EXPORT_SYMBOL(dma_free_coherent);
 void __dma_sync(dma_addr_t addr, size_t size,
 		enum dma_data_direction dir)
 {
-	_dma_sync(addr, size, dir);
+	__dma_sync_inline(addr, size, dir);
 }
 EXPORT_SYMBOL(__dma_sync);
 
diff --git a/arch/blackfin/kernel/entry.S b/arch/blackfin/kernel/entry.S
index f27dc2292e1b..686478f5f66b 100644
--- a/arch/blackfin/kernel/entry.S
+++ b/arch/blackfin/kernel/entry.S
@@ -44,7 +44,7 @@ ENTRY(_ret_from_fork)
 	sti r4;
 #endif /* CONFIG_IPIPE */
 	SP += -12;
-	call _schedule_tail;
+	pseudo_long_call _schedule_tail, p5;
 	SP += 12;
 	r0 = [sp + PT_IPEND];
 	cc = bittst(r0,1);
@@ -79,7 +79,7 @@ ENTRY(_sys_vfork)
 	r0 += 24;
 	[--sp] = rets;
 	SP += -12;
-	call _bfin_vfork;
+	pseudo_long_call _bfin_vfork, p2;
 	SP += 12;
 	rets = [sp++];
 	rts;
@@ -90,7 +90,7 @@ ENTRY(_sys_clone)
 	r0 += 24;
 	[--sp] = rets;
 	SP += -12;
-	call _bfin_clone;
+	pseudo_long_call _bfin_clone, p2;
 	SP += 12;
 	rets = [sp++];
 	rts;
@@ -101,7 +101,7 @@ ENTRY(_sys_rt_sigreturn)
 	r0 += 24;
 	[--sp] = rets;
 	SP += -12;
-	call _do_rt_sigreturn;
+	pseudo_long_call _do_rt_sigreturn, p2;
 	SP += 12;
 	rets = [sp++];
 	rts;
diff --git a/arch/blackfin/kernel/ftrace-entry.S b/arch/blackfin/kernel/ftrace-entry.S
index 76dd4fbcd17a..d66446b572c0 100644
--- a/arch/blackfin/kernel/ftrace-entry.S
+++ b/arch/blackfin/kernel/ftrace-entry.S
@@ -1,7 +1,7 @@
 /*
  * mcount and friends -- ftrace stuff
  *
- * Copyright (C) 2009 Analog Devices Inc.
+ * Copyright (C) 2009-2010 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
@@ -21,6 +21,15 @@
  * function will be waiting there.  mmmm pie.
  */
 ENTRY(__mcount)
+#ifdef CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST
+	/* optional micro optimization: return if stopped */
+	p1.l = _function_trace_stop;
+	p1.h = _function_trace_stop;
+	r3 = [p1];
+	cc = r3 == 0;
+	if ! cc jump _ftrace_stub (bp);
+#endif
+
 	/* save third function arg early so we can do testing below */
 	[--sp] = r2;
 
@@ -106,9 +115,12 @@ ENTRY(_ftrace_graph_caller)
 	[--sp] = r1;
 	[--sp] = rets;
 
-	/* prepare_ftrace_return(unsigned long *parent, unsigned long self_addr) */
-	r0 = sp;
-	r1 = rets;
+	/* prepare_ftrace_return(parent, self_addr, frame_pointer) */
+	r0 = sp;	/* unsigned long *parent */
+	r1 = rets;	/* unsigned long self_addr */
+#ifdef CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST
+	r2 = fp;	/* unsigned long frame_pointer */
+#endif
 	r0 += 16;	/* skip the 4 local regs on stack */
 	r1 += -MCOUNT_INSN_SIZE;
 	call _prepare_ftrace_return;
@@ -127,6 +139,9 @@ ENTRY(_return_to_handler)
 	[--sp] = r1;
 
 	/* get original return address */
+#ifdef CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST
+	r0 = fp;	/* Blackfin is sane, so omit this */
+#endif
 	call _ftrace_return_to_handler;
 	rets = r0;
 
diff --git a/arch/blackfin/kernel/ftrace.c b/arch/blackfin/kernel/ftrace.c
index f2c85ac6f2da..a61d948ea925 100644
--- a/arch/blackfin/kernel/ftrace.c
+++ b/arch/blackfin/kernel/ftrace.c
@@ -16,7 +16,8 @@
  * Hook the return address and push it in the stack of return addrs
  * in current thread info.
  */
-void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
+void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
+                           unsigned long frame_pointer)
 {
 	struct ftrace_graph_ent trace;
 	unsigned long return_hooker = (unsigned long)&return_to_handler;
@@ -24,7 +25,8 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
 	if (unlikely(atomic_read(&current->tracing_graph_pause)))
 		return;
 
-	if (ftrace_push_return_trace(*parent, self_addr, &trace.depth, 0) == -EBUSY)
+	if (ftrace_push_return_trace(*parent, self_addr, &trace.depth,
+	                             frame_pointer) == -EBUSY)
 		return;
 
 	trace.func = self_addr;
diff --git a/arch/blackfin/kernel/init_task.c b/arch/blackfin/kernel/init_task.c
index 118c5b9dedac..d3970e8acd1a 100644
--- a/arch/blackfin/kernel/init_task.c
+++ b/arch/blackfin/kernel/init_task.c
@@ -28,5 +28,5 @@ EXPORT_SYMBOL(init_task);
  * "init_task" linker map entry.
  */
 union thread_union init_thread_union
-    __attribute__ ((__section__(".init_task.data"))) = {
+    __init_task_data = {
 INIT_THREAD_INFO(init_task)};
diff --git a/arch/blackfin/kernel/kgdb.c b/arch/blackfin/kernel/kgdb.c
index 34c7c3ed2c9c..2c501ceb1e55 100644
--- a/arch/blackfin/kernel/kgdb.c
+++ b/arch/blackfin/kernel/kgdb.c
@@ -145,7 +145,7 @@ void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
 #endif
 }
 
-struct hw_breakpoint {
+static struct hw_breakpoint {
 	unsigned int occupied:1;
 	unsigned int skip:1;
 	unsigned int enabled:1;
@@ -155,7 +155,7 @@ struct hw_breakpoint {
 	unsigned int addr;
 } breakinfo[HW_WATCHPOINT_NUM];
 
-int bfin_set_hw_break(unsigned long addr, int len, enum kgdb_bptype type)
+static int bfin_set_hw_break(unsigned long addr, int len, enum kgdb_bptype type)
 {
 	int breakno;
 	int bfin_type;
@@ -202,7 +202,7 @@ int bfin_set_hw_break(unsigned long addr, int len, enum kgdb_bptype type)
 	return -ENOSPC;
 }
 
-int bfin_remove_hw_break(unsigned long addr, int len, enum kgdb_bptype type)
+static int bfin_remove_hw_break(unsigned long addr, int len, enum kgdb_bptype type)
 {
 	int breakno;
 	int bfin_type;
@@ -230,7 +230,7 @@ int bfin_remove_hw_break(unsigned long addr, int len, enum kgdb_bptype type)
 	return 0;
 }
 
-void bfin_remove_all_hw_break(void)
+static void bfin_remove_all_hw_break(void)
 {
 	int breakno;
 
@@ -242,7 +242,7 @@ void bfin_remove_all_hw_break(void)
 		breakinfo[breakno].type = TYPE_DATA_WATCHPOINT;
 }
 
-void bfin_correct_hw_break(void)
+static void bfin_correct_hw_break(void)
 {
 	int breakno;
 	unsigned int wpiactl = 0;
diff --git a/arch/blackfin/kernel/nmi.c b/arch/blackfin/kernel/nmi.c
new file mode 100644
index 000000000000..0b5f72f17fd0
--- /dev/null
+++ b/arch/blackfin/kernel/nmi.c
@@ -0,0 +1,299 @@
+/*
+ * Blackfin nmi_watchdog Driver
+ *
+ * Originally based on bfin_wdt.c
+ * Copyright 2010-2010 Analog Devices Inc.
+ *		Graff Yang <graf.yang@analog.com>
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/bitops.h>
+#include <linux/hardirq.h>
+#include <linux/sysdev.h>
+#include <linux/pm.h>
+#include <linux/nmi.h>
+#include <linux/smp.h>
+#include <linux/timer.h>
+#include <asm/blackfin.h>
+#include <asm/atomic.h>
+#include <asm/cacheflush.h>
+#include <asm/bfin_watchdog.h>
+
+#define DRV_NAME "nmi-wdt"
+
+#define NMI_WDT_TIMEOUT 5          /* 5 seconds */
+#define NMI_CHECK_TIMEOUT (4 * HZ) /* 4 seconds in jiffies */
+static int nmi_wdt_cpu = 1;
+
+static unsigned int timeout = NMI_WDT_TIMEOUT;
+static int nmi_active;
+
+static unsigned short wdoga_ctl;
+static unsigned int wdoga_cnt;
+static struct corelock_slot saved_corelock;
+static atomic_t nmi_touched[NR_CPUS];
+static struct timer_list ntimer;
+
+enum {
+	COREA_ENTER_NMI = 0,
+	COREA_EXIT_NMI,
+	COREB_EXIT_NMI,
+
+	NMI_EVENT_NR,
+};
+static unsigned long nmi_event __attribute__ ((__section__(".l2.bss")));
+
+/* we are in nmi, non-atomic bit ops is safe */
+static inline void set_nmi_event(int event)
+{
+	__set_bit(event, &nmi_event);
+}
+
+static inline void wait_nmi_event(int event)
+{
+	while (!test_bit(event, &nmi_event))
+		barrier();
+	__clear_bit(event, &nmi_event);
+}
+
+static inline void send_corea_nmi(void)
+{
+	wdoga_ctl = bfin_read_WDOGA_CTL();
+	wdoga_cnt = bfin_read_WDOGA_CNT();
+
+	bfin_write_WDOGA_CTL(WDEN_DISABLE);
+	bfin_write_WDOGA_CNT(0);
+	bfin_write_WDOGA_CTL(WDEN_ENABLE | ICTL_NMI);
+}
+
+static inline void restore_corea_nmi(void)
+{
+	bfin_write_WDOGA_CTL(WDEN_DISABLE);
+	bfin_write_WDOGA_CTL(WDOG_EXPIRED | WDEN_DISABLE | ICTL_NONE);
+
+	bfin_write_WDOGA_CNT(wdoga_cnt);
+	bfin_write_WDOGA_CTL(wdoga_ctl);
+}
+
+static inline void save_corelock(void)
+{
+	saved_corelock = corelock;
+	corelock.lock = 0;
+}
+
+static inline void restore_corelock(void)
+{
+	corelock = saved_corelock;
+}
+
+
+static inline void nmi_wdt_keepalive(void)
+{
+	bfin_write_WDOGB_STAT(0);
+}
+
+static inline void nmi_wdt_stop(void)
+{
+	bfin_write_WDOGB_CTL(WDEN_DISABLE);
+}
+
+/* before calling this function, you must stop the WDT */
+static inline void nmi_wdt_clear(void)
+{
+	/* clear TRO bit, disable event generation */
+	bfin_write_WDOGB_CTL(WDOG_EXPIRED | WDEN_DISABLE | ICTL_NONE);
+}
+
+static inline void nmi_wdt_start(void)
+{
+	bfin_write_WDOGB_CTL(WDEN_ENABLE | ICTL_NMI);
+}
+
+static inline int nmi_wdt_running(void)
+{
+	return ((bfin_read_WDOGB_CTL() & WDEN_MASK) != WDEN_DISABLE);
+}
+
+static inline int nmi_wdt_set_timeout(unsigned long t)
+{
+	u32 cnt, max_t, sclk;
+	int run;
+
+	sclk = get_sclk();
+	max_t = -1 / sclk;
+	cnt = t * sclk;
+	if (t > max_t) {
+		pr_warning("NMI: timeout value is too large\n");
+		return -EINVAL;
+	}
+
+	run = nmi_wdt_running();
+	nmi_wdt_stop();
+	bfin_write_WDOGB_CNT(cnt);
+	if (run)
+		nmi_wdt_start();
+
+	timeout = t;
+
+	return 0;
+}
+
+int check_nmi_wdt_touched(void)
+{
+	unsigned int this_cpu = smp_processor_id();
+	unsigned int cpu;
+
+	cpumask_t mask = cpu_online_map;
+
+	if (!atomic_read(&nmi_touched[this_cpu]))
+		return 0;
+
+	atomic_set(&nmi_touched[this_cpu], 0);
+
+	cpu_clear(this_cpu, mask);
+	for_each_cpu_mask(cpu, mask) {
+		invalidate_dcache_range((unsigned long)(&nmi_touched[cpu]),
+				(unsigned long)(&nmi_touched[cpu]));
+		if (!atomic_read(&nmi_touched[cpu]))
+			return 0;
+		atomic_set(&nmi_touched[cpu], 0);
+	}
+
+	return 1;
+}
+
+static void nmi_wdt_timer(unsigned long data)
+{
+	if (check_nmi_wdt_touched())
+		nmi_wdt_keepalive();
+
+	mod_timer(&ntimer, jiffies + NMI_CHECK_TIMEOUT);
+}
+
+static int __init init_nmi_wdt(void)
+{
+	nmi_wdt_set_timeout(timeout);
+	nmi_wdt_start();
+	nmi_active = true;
+
+	init_timer(&ntimer);
+	ntimer.function = nmi_wdt_timer;
+	ntimer.expires = jiffies + NMI_CHECK_TIMEOUT;
+	add_timer(&ntimer);
+
+	pr_info("nmi_wdt: initialized: timeout=%d sec\n", timeout);
+	return 0;
+}
+device_initcall(init_nmi_wdt);
+
+void touch_nmi_watchdog(void)
+{
+	atomic_set(&nmi_touched[smp_processor_id()], 1);
+}
+
+/* Suspend/resume support */
+#ifdef CONFIG_PM
+static int nmi_wdt_suspend(struct sys_device *dev, pm_message_t state)
+{
+	nmi_wdt_stop();
+	return 0;
+}
+
+static int nmi_wdt_resume(struct sys_device *dev)
+{
+	if (nmi_active)
+		nmi_wdt_start();
+	return 0;
+}
+
+static struct sysdev_class nmi_sysclass = {
+	.name		= DRV_NAME,
+	.resume		= nmi_wdt_resume,
+	.suspend	= nmi_wdt_suspend,
+};
+
+static struct sys_device device_nmi_wdt = {
+	.id	= 0,
+	.cls	= &nmi_sysclass,
+};
+
+static int __init init_nmi_wdt_sysfs(void)
+{
+	int error;
+
+	if (!nmi_active)
+		return 0;
+
+	error = sysdev_class_register(&nmi_sysclass);
+	if (!error)
+		error = sysdev_register(&device_nmi_wdt);
+	return error;
+}
+late_initcall(init_nmi_wdt_sysfs);
+
+#endif	/* CONFIG_PM */
+
+
+asmlinkage notrace void do_nmi(struct pt_regs *fp)
+{
+	unsigned int cpu = smp_processor_id();
+	nmi_enter();
+
+	cpu_pda[cpu].__nmi_count += 1;
+
+	if (cpu == nmi_wdt_cpu) {
+		/* CoreB goes here first */
+
+		/* reload the WDOG_STAT */
+		nmi_wdt_keepalive();
+
+		/* clear nmi interrupt for CoreB */
+		nmi_wdt_stop();
+		nmi_wdt_clear();
+
+		/* trigger NMI interrupt of CoreA */
+		send_corea_nmi();
+
+		/* waiting CoreB to enter NMI */
+		wait_nmi_event(COREA_ENTER_NMI);
+
+		/* recover WDOGA's settings */
+		restore_corea_nmi();
+
+		save_corelock();
+
+		/* corelock is save/cleared, CoreA is dummping messages */
+
+		wait_nmi_event(COREA_EXIT_NMI);
+	} else {
+		/* OK, CoreA entered NMI */
+		set_nmi_event(COREA_ENTER_NMI);
+	}
+
+	pr_emerg("\nNMI Watchdog detected LOCKUP, dump for CPU %d\n", cpu);
+	dump_bfin_process(fp);
+	dump_bfin_mem(fp);
+	show_regs(fp);
+	dump_bfin_trace_buffer();
+	show_stack(current, (unsigned long *)fp);
+
+	if (cpu == nmi_wdt_cpu) {
+		pr_emerg("This fault is not recoverable, sorry!\n");
+
+		/* CoreA dump finished, restore the corelock */
+		restore_corelock();
+
+		set_nmi_event(COREB_EXIT_NMI);
+	} else {
+		/* CoreB dump finished, notice the CoreA we are done */
+		set_nmi_event(COREA_EXIT_NMI);
+
+		/* synchronize with CoreA */
+		wait_nmi_event(COREB_EXIT_NMI);
+	}
+
+	nmi_exit();
+}
diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c
index b56b0e485e0b..29705cec91de 100644
--- a/arch/blackfin/kernel/process.c
+++ b/arch/blackfin/kernel/process.c
@@ -98,13 +98,6 @@ void cpu_idle(void)
 	}
 }
 
-/* Fill in the fpu structure for a core dump.  */
-
-int dump_fpu(struct pt_regs *regs, elf_fpregset_t * fpregs)
-{
-	return 1;
-}
-
 /*
  * This gets run with P1 containing the
  * function to call, and R1 containing
diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c
index 65567dc4b9f5..43eb969405d1 100644
--- a/arch/blackfin/kernel/ptrace.c
+++ b/arch/blackfin/kernel/ptrace.c
@@ -1,6 +1,6 @@
 /*
  * linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds
- * these modifications are Copyright 2004-2009 Analog Devices Inc.
+ * these modifications are Copyright 2004-2010 Analog Devices Inc.
  *
  * Licensed under the GPL-2
  */
@@ -9,10 +9,13 @@
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
+#include <linux/elf.h>
 #include <linux/errno.h>
 #include <linux/ptrace.h>
 #include <linux/user.h>
+#include <linux/regset.h>
 #include <linux/signal.h>
+#include <linux/tracehook.h>
 #include <linux/uaccess.h>
 
 #include <asm/page.h>
@@ -25,90 +28,57 @@
 #include <asm/cacheflush.h>
 #include <asm/mem_map.h>
 
-#define TEXT_OFFSET 0
 /*
  * does not yet catch signals sent when the child dies.
  * in exit.c or in signal.c.
  */
 
-/* determines which bits in the SYSCFG reg the user has access to. */
-/* 1 = access 0 = no access */
-#define SYSCFG_MASK 0x0007	/* SYSCFG reg */
-/* sets the trace bits. */
-#define TRACE_BITS 0x0001
-
-/* Find the stack offset for a register, relative to thread.esp0. */
-#define PT_REG(reg)	((long)&((struct pt_regs *)0)->reg)
-
-/*
- * Get the address of the live pt_regs for the specified task.
- * These are saved onto the top kernel stack when the process
- * is not running.
- *
- * Note: if a user thread is execve'd from kernel space, the
- * kernel stack will not be empty on entry to the kernel, so
- * ptracing these tasks will fail.
- */
-static inline struct pt_regs *get_user_regs(struct task_struct *task)
-{
-	return (struct pt_regs *)
-	    ((unsigned long)task_stack_page(task) +
-	     (THREAD_SIZE - sizeof(struct pt_regs)));
-}
-
-/*
- * Get all user integer registers.
- */
-static inline int ptrace_getregs(struct task_struct *tsk, void __user *uregs)
-{
-	struct pt_regs regs;
-	memcpy(&regs, get_user_regs(tsk), sizeof(regs));
-	regs.usp = tsk->thread.usp;
-	return copy_to_user(uregs, &regs, sizeof(struct pt_regs)) ? -EFAULT : 0;
-}
-
-/* Mapping from PT_xxx to the stack offset at which the register is
- * saved.  Notice that usp has no stack-slot and needs to be treated
- * specially (see get_reg/put_reg below).
- */
-
 /*
  * Get contents of register REGNO in task TASK.
  */
-static inline long get_reg(struct task_struct *task, int regno)
+static inline long
+get_reg(struct task_struct *task, long regno, unsigned long __user *datap)
 {
-	unsigned char *reg_ptr;
+	long tmp;
+	struct pt_regs *regs = task_pt_regs(task);
 
-	struct pt_regs *regs =
-	    (struct pt_regs *)((unsigned long)task_stack_page(task) +
-			       (THREAD_SIZE - sizeof(struct pt_regs)));
-	reg_ptr = (char *)regs;
+	if (regno & 3 || regno > PT_LAST_PSEUDO || regno < 0)
+		return -EIO;
 
 	switch (regno) {
+	case PT_TEXT_ADDR:
+		tmp = task->mm->start_code;
+		break;
+	case PT_TEXT_END_ADDR:
+		tmp = task->mm->end_code;
+		break;
+	case PT_DATA_ADDR:
+		tmp = task->mm->start_data;
+		break;
 	case PT_USP:
-		return task->thread.usp;
+		tmp = task->thread.usp;
+		break;
 	default:
-		if (regno <= 216)
-			return *(long *)(reg_ptr + regno);
+		if (regno < sizeof(*regs)) {
+			void *reg_ptr = regs;
+			tmp = *(long *)(reg_ptr + regno);
+		} else
+			return -EIO;
 	}
-	/* slight mystery ... never seems to come here but kernel misbehaves without this code! */
 
-	printk(KERN_WARNING "Request to get for unknown register %d\n", regno);
-	return 0;
+	return put_user(tmp, datap);
 }
 
 /*
  * Write contents of register REGNO in task TASK.
  */
 static inline int
-put_reg(struct task_struct *task, int regno, unsigned long data)
+put_reg(struct task_struct *task, long regno, unsigned long data)
 {
-	char *reg_ptr;
+	struct pt_regs *regs = task_pt_regs(task);
 
-	struct pt_regs *regs =
-	    (struct pt_regs *)((unsigned long)task_stack_page(task) +
-			       (THREAD_SIZE - sizeof(struct pt_regs)));
-	reg_ptr = (char *)regs;
+	if (regno & 3 || regno > PT_LAST_PSEUDO || regno < 0)
+		return -EIO;
 
 	switch (regno) {
 	case PT_PC:
@@ -125,10 +95,18 @@ put_reg(struct task_struct *task, int regno, unsigned long data)
 		regs->usp = data;
 		task->thread.usp = data;
 		break;
+	case PT_SYSCFG:	/* don't let userspace screw with this */
+		if ((data & ~1) != 0x6)
+			pr_warning("ptrace: ignore syscfg write of %#lx\n", data);
+		break;		/* regs->syscfg = data; break; */
 	default:
-		if (regno <= 216)
-			*(long *)(reg_ptr + regno) = data;
+		if (regno < sizeof(*regs)) {
+			void *reg_offset = regs;
+			*(long *)(reg_offset + regno) = data;
+		}
+		/* Ignore writes to pseudo registers */
 	}
+
 	return 0;
 }
 
@@ -160,24 +138,98 @@ static inline int is_user_addr_valid(struct task_struct *child,
 	return -EIO;
 }
 
-void ptrace_enable(struct task_struct *child)
+/*
+ * retrieve the contents of Blackfin userspace general registers
+ */
+static int genregs_get(struct task_struct *target,
+		       const struct user_regset *regset,
+		       unsigned int pos, unsigned int count,
+		       void *kbuf, void __user *ubuf)
 {
-	unsigned long tmp;
-	tmp = get_reg(child, PT_SYSCFG) | (TRACE_BITS);
-	put_reg(child, PT_SYSCFG, tmp);
+	struct pt_regs *regs = task_pt_regs(target);
+	int ret;
+
+	/* This sucks ... */
+	regs->usp = target->thread.usp;
+
+	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				  regs, 0, sizeof(*regs));
+	if (ret < 0)
+		return ret;
+
+	return user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
+					sizeof(*regs), -1);
 }
 
 /*
- * Called by kernel/ptrace.c when detaching..
- *
- * Make sure the single step bit is not set.
+ * update the contents of the Blackfin userspace general registers
+ */
+static int genregs_set(struct task_struct *target,
+		       const struct user_regset *regset,
+		       unsigned int pos, unsigned int count,
+		       const void *kbuf, const void __user *ubuf)
+{
+	struct pt_regs *regs = task_pt_regs(target);
+	int ret;
+
+	/* Don't let people set SYSCFG (it's at the end of pt_regs) */
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 regs, 0, PT_SYSCFG);
+	if (ret < 0)
+		return ret;
+
+	/* This sucks ... */
+	target->thread.usp = regs->usp;
+	/* regs->retx = regs->pc; */
+
+	return user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
+					PT_SYSCFG, -1);
+}
+
+/*
+ * Define the register sets available on the Blackfin under Linux
  */
-void ptrace_disable(struct task_struct *child)
+enum bfin_regset {
+	REGSET_GENERAL,
+};
+
+static const struct user_regset bfin_regsets[] = {
+	[REGSET_GENERAL] = {
+		.core_note_type = NT_PRSTATUS,
+		.n              = sizeof(struct pt_regs) / sizeof(long),
+		.size           = sizeof(long),
+		.align          = sizeof(long),
+		.get            = genregs_get,
+		.set            = genregs_set,
+	},
+};
+
+static const struct user_regset_view user_bfin_native_view = {
+	.name      = "Blackfin",
+	.e_machine = EM_BLACKFIN,
+	.regsets   = bfin_regsets,
+	.n         = ARRAY_SIZE(bfin_regsets),
+};
+
+const struct user_regset_view *task_user_regset_view(struct task_struct *task)
+{
+	return &user_bfin_native_view;
+}
+
+void user_enable_single_step(struct task_struct *child)
+{
+	struct pt_regs *regs = task_pt_regs(child);
+	regs->syscfg |= SYSCFG_SSSTEP;
+
+	set_tsk_thread_flag(child, TIF_SINGLESTEP);
+}
+
+void user_disable_single_step(struct task_struct *child)
 {
-	unsigned long tmp;
-	/* make sure the single step bit is not set. */
-	tmp = get_reg(child, PT_SYSCFG) & ~TRACE_BITS;
-	put_reg(child, PT_SYSCFG, tmp);
+	struct pt_regs *regs = task_pt_regs(child);
+	regs->syscfg &= ~SYSCFG_SSSTEP;
+
+	clear_tsk_thread_flag(child, TIF_SINGLESTEP);
 }
 
 long arch_ptrace(struct task_struct *child, long request, long addr, long data)
@@ -240,40 +292,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 			break;
 		}
 
-		/* read the word at location addr in the USER area. */
-	case PTRACE_PEEKUSR:
-		{
-			unsigned long tmp;
-			ret = -EIO;
-			tmp = 0;
-			if ((addr & 3) || (addr > (sizeof(struct pt_regs) + 16))) {
-				printk(KERN_WARNING "ptrace error : PEEKUSR : temporarily returning "
-				                    "0 - %x sizeof(pt_regs) is %lx\n",
-				     (int)addr, sizeof(struct pt_regs));
-				break;
-			}
-			if (addr == sizeof(struct pt_regs)) {
-				/* PT_TEXT_ADDR */
-				tmp = child->mm->start_code + TEXT_OFFSET;
-			} else if (addr == (sizeof(struct pt_regs) + 4)) {
-				/* PT_TEXT_END_ADDR */
-				tmp = child->mm->end_code;
-			} else if (addr == (sizeof(struct pt_regs) + 8)) {
-				/* PT_DATA_ADDR */
-				tmp = child->mm->start_data;
-#ifdef CONFIG_BINFMT_ELF_FDPIC
-			} else if (addr == (sizeof(struct pt_regs) + 12)) {
-				goto case_PTRACE_GETFDPIC_EXEC;
-			} else if (addr == (sizeof(struct pt_regs) + 16)) {
-				goto case_PTRACE_GETFDPIC_INTERP;
-#endif
-			} else {
-				tmp = get_reg(child, addr);
-			}
-			ret = put_user(tmp, datap);
-			break;
-		}
-
 #ifdef CONFIG_BINFMT_ELF_FDPIC
 	case PTRACE_GETFDPIC: {
 		unsigned long tmp = 0;
@@ -336,78 +354,36 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 			break;
 		}
 
-	case PTRACE_POKEUSR:	/* write the word at location addr in the USER area */
-		ret = -EIO;
-		if ((addr & 3) || (addr > (sizeof(struct pt_regs) + 16))) {
-			printk(KERN_WARNING "ptrace error : POKEUSR: temporarily returning 0\n");
-			break;
-		}
-
-		if (addr >= (sizeof(struct pt_regs))) {
-			ret = 0;
-			break;
-		}
-		if (addr == PT_SYSCFG) {
-			data &= SYSCFG_MASK;
-			data |= get_reg(child, PT_SYSCFG);
+	case PTRACE_PEEKUSR:
+		switch (addr) {
+#ifdef CONFIG_BINFMT_ELF_FDPIC	/* backwards compat */
+		case PT_FDPIC_EXEC:   goto case_PTRACE_GETFDPIC_EXEC;
+		case PT_FDPIC_INTERP: goto case_PTRACE_GETFDPIC_INTERP;
+#endif
+		default:
+			ret = get_reg(child, addr, datap);
 		}
-		ret = put_reg(child, addr, data);
+		pr_debug("ptrace: PEEKUSR reg %li with %#lx = %i\n", addr, data, ret);
 		break;
 
-	case PTRACE_SYSCALL:	/* continue and stop at next (return from) syscall */
-	case PTRACE_CONT:	/* restart after signal. */
-		pr_debug("ptrace: syscall/cont\n");
-
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		if (request == PTRACE_SYSCALL)
-			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		else
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		child->exit_code = data;
-		ptrace_disable(child);
-		pr_debug("ptrace: before wake_up_process\n");
-		wake_up_process(child);
-		ret = 0;
-		break;
-
-	/*
-	 * make the child exit.  Best I can do is send it a sigkill.
-	 * perhaps it should be put in the status that it wants to
-	 * exit.
-	 */
-	case PTRACE_KILL:
-		ret = 0;
-		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
-			break;
-		child->exit_code = SIGKILL;
-		ptrace_disable(child);
-		wake_up_process(child);
-		break;
-
-	case PTRACE_SINGLESTEP:	/* set the trap flag. */
-		pr_debug("ptrace: single step\n");
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		ptrace_enable(child);
-		child->exit_code = data;
-		wake_up_process(child);
-		ret = 0;
+	case PTRACE_POKEUSR:
+		ret = put_reg(child, addr, data);
+		pr_debug("ptrace: POKEUSR reg %li with %li = %i\n", addr, data, ret);
 		break;
 
 	case PTRACE_GETREGS:
-		/* Get all gp regs from the child. */
-		ret = ptrace_getregs(child, datap);
-		break;
+		pr_debug("ptrace: PTRACE_GETREGS\n");
+		return copy_regset_to_user(child, &user_bfin_native_view,
+					   REGSET_GENERAL,
+					   0, sizeof(struct pt_regs),
+					   (void __user *)data);
 
 	case PTRACE_SETREGS:
-		printk(KERN_WARNING "ptrace: SETREGS: **** NOT IMPLEMENTED ***\n");
-		/* Set all gp regs in the child. */
-		ret = 0;
-		break;
+		pr_debug("ptrace: PTRACE_SETREGS\n");
+		return copy_regset_from_user(child, &user_bfin_native_view,
+					     REGSET_GENERAL,
+					     0, sizeof(struct pt_regs),
+					     (const void __user *)data);
 
 	default:
 		ret = ptrace_request(child, request, addr, data);
@@ -417,27 +393,21 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	return ret;
 }
 
-asmlinkage void syscall_trace(void)
+asmlinkage int syscall_trace_enter(struct pt_regs *regs)
 {
-	if (!test_thread_flag(TIF_SYSCALL_TRACE))
-		return;
-
-	if (!(current->ptrace & PT_PTRACED))
-		return;
-
-	/* the 0x80 provides a way for the tracing parent to distinguish
-	 * between a syscall stop and SIGTRAP delivery
-	 */
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
-				 ? 0x80 : 0));
-
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (current->exit_code) {
-		send_sig(current->exit_code, current, 1);
-		current->exit_code = 0;
-	}
+	int ret = 0;
+
+	if (test_thread_flag(TIF_SYSCALL_TRACE))
+		ret = tracehook_report_syscall_entry(regs);
+
+	return ret;
+}
+
+asmlinkage void syscall_trace_leave(struct pt_regs *regs)
+{
+	int step;
+
+	step = test_thread_flag(TIF_SINGLESTEP);
+	if (step || test_thread_flag(TIF_SYSCALL_TRACE))
+		tracehook_report_syscall_exit(regs, step);
 }
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index 95448ae9c43a..8e2efceb364b 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -220,6 +220,16 @@ void __init bfin_relocate_l1_mem(void)
 		memcpy(_stext_l2, _l2_lma, l2_len);
 }
 
+#ifdef CONFIG_ROMKERNEL
+void __init bfin_relocate_xip_data(void)
+{
+	early_shadow_stamp();
+
+	memcpy(_sdata, _data_lma, (unsigned long)_data_len - THREAD_SIZE + sizeof(struct thread_info));
+	memcpy(_sinitdata, _init_data_lma, (unsigned long)_init_data_len);
+}
+#endif
+
 /* add_memory_region to memmap */
 static void __init add_memory_region(unsigned long long start,
 			      unsigned long long size, int type)
@@ -504,7 +514,7 @@ static __init void memory_setup(void)
 #endif
 	unsigned long max_mem;
 
-	_rambase = (unsigned long)_stext;
+	_rambase = CONFIG_BOOT_LOAD;
 	_ramstart = (unsigned long)_end;
 
 	if (DMA_UNCACHED_REGION > (_ramend - _ramstart)) {
@@ -597,7 +607,12 @@ static __init void memory_setup(void)
 	}
 
 #ifdef CONFIG_MPU
+#if defined(CONFIG_ROMFS_ON_MTD) && defined(CONFIG_MTD_ROM)
+	page_mask_nelts = (((_ramend + ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE -
+					ASYNC_BANK0_BASE) >> PAGE_SHIFT) + 31) / 32;
+#else
 	page_mask_nelts = ((_ramend >> PAGE_SHIFT) + 31) / 32;
+#endif
 	page_mask_order = get_order(3 * page_mask_nelts * sizeof(long));
 #endif
 
@@ -630,7 +645,7 @@ static __init void memory_setup(void)
 		__bss_start, __bss_stop,
 		_sdata, _edata,
 		(void *)&init_thread_union,
-		(void *)((int)(&init_thread_union) + 0x2000),
+		(void *)((int)(&init_thread_union) + THREAD_SIZE),
 		__init_begin, __init_end,
 		(void *)_ramstart, (void *)memory_end
 #ifdef CONFIG_MTD_UCLINUX
@@ -792,10 +807,17 @@ static inline int __init get_mem_size(void)
 	BUG();
 }
 
+__attribute__((weak))
+void __init native_machine_early_platform_add_devices(void)
+{
+}
+
 void __init setup_arch(char **cmdline_p)
 {
 	unsigned long sclk, cclk;
 
+	native_machine_early_platform_add_devices();
+
 	enable_shadow_console();
 
 	/* Check to make sure we are running on the right processor */
@@ -1217,10 +1239,10 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 		   dsup_banks, BFIN_DSUBBANKS, BFIN_DWAYS,
 		   BFIN_DLINES);
 #ifdef __ARCH_SYNC_CORE_DCACHE
-	seq_printf(m, "SMP Dcache Flushes\t: %lu\n\n", cpudata->dcache_invld_count);
+	seq_printf(m, "SMP Dcache Flushes\t: %lu\n\n", dcache_invld_count[cpu_num]);
 #endif
 #ifdef __ARCH_SYNC_CORE_ICACHE
-	seq_printf(m, "SMP Icache Flushes\t: %lu\n\n", cpudata->icache_invld_count);
+	seq_printf(m, "SMP Icache Flushes\t: %lu\n\n", icache_invld_count[cpu_num]);
 #endif
 
 	if (cpu_num != num_possible_cpus() - 1)
@@ -1249,8 +1271,8 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	seq_printf(m, "board memory\t: %ld kB (0x%p -> 0x%p)\n",
 		 physical_mem_end >> 10, (void *)0, (void *)physical_mem_end);
 	seq_printf(m, "kernel memory\t: %d kB (0x%p -> 0x%p)\n",
-		((int)memory_end - (int)_stext) >> 10,
-		_stext,
+		((int)memory_end - (int)_rambase) >> 10,
+		(void *)_rambase,
 		(void *)memory_end);
 	seq_printf(m, "\n");
 
diff --git a/arch/blackfin/kernel/signal.c b/arch/blackfin/kernel/signal.c
index e0fd63e9e38a..d536f35d1f43 100644
--- a/arch/blackfin/kernel/signal.c
+++ b/arch/blackfin/kernel/signal.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2004-2009 Analog Devices Inc.
+ * Copyright 2004-2010 Analog Devices Inc.
  *
  * Licensed under the GPL-2 or later
  */
@@ -17,6 +17,7 @@
 #include <asm/cacheflush.h>
 #include <asm/ucontext.h>
 #include <asm/fixed_code.h>
+#include <asm/syscall.h>
 
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
 
@@ -50,6 +51,9 @@ rt_restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int *p
 	unsigned long usp = 0;
 	int err = 0;
 
+	/* Always make any pending restarted system calls return -EINTR */
+	current_thread_info()->restart_block.fn = do_no_restart_syscall;
+
 #define RESTORE(x) err |= __get_user(regs->x, &sc->sc_##x)
 
 	/* restore passed registers */
@@ -206,16 +210,6 @@ setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t * info,
 	regs->r1 = (unsigned long)(&frame->info);
 	regs->r2 = (unsigned long)(&frame->uc);
 
-	/*
-	 * Clear the trace flag when entering the signal handler, but
-	 * notify any tracer that was single-stepping it. The tracer
-	 * may want to single-step inside the handler too.
-	 */
-	if (regs->syscfg & TRACE_BITS) {
-		regs->syscfg &= ~TRACE_BITS;
-		ptrace_notify(SIGTRAP);
-	}
-
 	return 0;
 
  give_sigsegv:
@@ -247,6 +241,11 @@ handle_restart(struct pt_regs *regs, struct k_sigaction *ka, int has_handler)
 		regs->r0 = regs->orig_r0;
 		regs->pc -= 2;
 		break;
+
+	case -ERESTART_RESTARTBLOCK:
+		regs->p0 = __NR_restart_syscall;
+		regs->pc -= 2;
+		break;
 	}
 }
 
@@ -315,6 +314,9 @@ asmlinkage void do_signal(struct pt_regs *regs)
 			 * clear the TIF_RESTORE_SIGMASK flag */
 			if (test_thread_flag(TIF_RESTORE_SIGMASK))
 				clear_thread_flag(TIF_RESTORE_SIGMASK);
+
+			tracehook_signal_handler(signr, &info, &ka, regs,
+				test_thread_flag(TIF_SINGLESTEP));
 		}
 
 		return;
diff --git a/arch/blackfin/kernel/time-ts.c b/arch/blackfin/kernel/time-ts.c
index 17c38c5b5b22..cb7a01d4f009 100644
--- a/arch/blackfin/kernel/time-ts.c
+++ b/arch/blackfin/kernel/time-ts.c
@@ -21,6 +21,7 @@
 #include <asm/blackfin.h>
 #include <asm/time.h>
 #include <asm/gptimers.h>
+#include <asm/nmi.h>
 
 /* Accelerators for sched_clock()
  * convert from cycles(64bits) => nanoseconds (64bits)
@@ -50,7 +51,11 @@
 
 static notrace cycle_t bfin_read_cycles(struct clocksource *cs)
 {
+#ifdef CONFIG_CPU_FREQ
 	return __bfin_cycles_off + (get_cycles() << __bfin_cycles_mod);
+#else
+	return get_cycles();
+#endif
 }
 
 static struct clocksource bfin_cs_cycles = {
@@ -132,7 +137,6 @@ static int __init bfin_cs_gptimer0_init(void)
 # define bfin_cs_gptimer0_init()
 #endif
 
-
 #if defined(CONFIG_GPTMR0_CLOCKSOURCE) || defined(CONFIG_CYCLES_CLOCKSOURCE)
 /* prefer to use cycles since it has higher rating */
 notrace unsigned long long sched_clock(void)
@@ -145,47 +149,8 @@ notrace unsigned long long sched_clock(void)
 }
 #endif
 
-#ifdef CONFIG_CORE_TIMER_IRQ_L1
-__attribute__((l1_text))
-#endif
-irqreturn_t timer_interrupt(int irq, void *dev_id);
-
-static int bfin_timer_set_next_event(unsigned long, \
-		struct clock_event_device *);
-
-static void bfin_timer_set_mode(enum clock_event_mode, \
-		struct clock_event_device *);
-
-static struct clock_event_device clockevent_bfin = {
-#if defined(CONFIG_TICKSOURCE_GPTMR0)
-	.name		= "bfin_gptimer0",
-	.rating		= 300,
-	.irq		= IRQ_TIMER0,
-#else
-	.name		= "bfin_core_timer",
-	.rating		= 350,
-	.irq		= IRQ_CORETMR,
-#endif
-	.shift		= 32,
-	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_next_event = bfin_timer_set_next_event,
-	.set_mode	= bfin_timer_set_mode,
-};
-
-static struct irqaction bfin_timer_irq = {
-#if defined(CONFIG_TICKSOURCE_GPTMR0)
-	.name		= "Blackfin GPTimer0",
-#else
-	.name		= "Blackfin CoreTimer",
-#endif
-	.flags		= IRQF_DISABLED | IRQF_TIMER | \
-			  IRQF_IRQPOLL | IRQF_PERCPU,
-	.handler	= timer_interrupt,
-	.dev_id		= &clockevent_bfin,
-};
-
 #if defined(CONFIG_TICKSOURCE_GPTMR0)
-static int bfin_timer_set_next_event(unsigned long cycles,
+static int bfin_gptmr0_set_next_event(unsigned long cycles,
                                      struct clock_event_device *evt)
 {
 	disable_gptimers(TIMER0bit);
@@ -196,7 +161,7 @@ static int bfin_timer_set_next_event(unsigned long cycles,
 	return 0;
 }
 
-static void bfin_timer_set_mode(enum clock_event_mode mode,
+static void bfin_gptmr0_set_mode(enum clock_event_mode mode,
 				struct clock_event_device *evt)
 {
 	switch (mode) {
@@ -224,25 +189,65 @@ static void bfin_timer_set_mode(enum clock_event_mode mode,
 	}
 }
 
-static void bfin_timer_ack(void)
+static void bfin_gptmr0_ack(void)
 {
 	set_gptimer_status(TIMER_GROUP1, TIMER_STATUS_TIMIL0);
 }
 
-static void __init bfin_timer_init(void)
+static void __init bfin_gptmr0_init(void)
 {
 	disable_gptimers(TIMER0bit);
 }
 
-static unsigned long  __init bfin_clockevent_check(void)
+#ifdef CONFIG_CORE_TIMER_IRQ_L1
+__attribute__((l1_text))
+#endif
+irqreturn_t bfin_gptmr0_interrupt(int irq, void *dev_id)
 {
-	setup_irq(IRQ_TIMER0, &bfin_timer_irq);
-	return get_sclk();
+	struct clock_event_device *evt = dev_id;
+	smp_mb();
+	evt->event_handler(evt);
+	bfin_gptmr0_ack();
+	return IRQ_HANDLED;
 }
 
-#else /* CONFIG_TICKSOURCE_CORETMR */
+static struct irqaction gptmr0_irq = {
+	.name		= "Blackfin GPTimer0",
+	.flags		= IRQF_DISABLED | IRQF_TIMER | \
+			  IRQF_IRQPOLL | IRQF_PERCPU,
+	.handler	= bfin_gptmr0_interrupt,
+};
 
-static int bfin_timer_set_next_event(unsigned long cycles,
+static struct clock_event_device clockevent_gptmr0 = {
+	.name		= "bfin_gptimer0",
+	.rating		= 300,
+	.irq		= IRQ_TIMER0,
+	.shift		= 32,
+	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.set_next_event = bfin_gptmr0_set_next_event,
+	.set_mode	= bfin_gptmr0_set_mode,
+};
+
+static void __init bfin_gptmr0_clockevent_init(struct clock_event_device *evt)
+{
+	unsigned long clock_tick;
+
+	clock_tick = get_sclk();
+	evt->mult = div_sc(clock_tick, NSEC_PER_SEC, evt->shift);
+	evt->max_delta_ns = clockevent_delta2ns(-1, evt);
+	evt->min_delta_ns = clockevent_delta2ns(100, evt);
+
+	evt->cpumask = cpumask_of(0);
+
+	clockevents_register_device(evt);
+}
+#endif /* CONFIG_TICKSOURCE_GPTMR0 */
+
+#if defined(CONFIG_TICKSOURCE_CORETMR)
+/* per-cpu local core timer */
+static DEFINE_PER_CPU(struct clock_event_device, coretmr_events);
+
+static int bfin_coretmr_set_next_event(unsigned long cycles,
 				struct clock_event_device *evt)
 {
 	bfin_write_TCNTL(TMPWR);
@@ -253,7 +258,7 @@ static int bfin_timer_set_next_event(unsigned long cycles,
 	return 0;
 }
 
-static void bfin_timer_set_mode(enum clock_event_mode mode,
+static void bfin_coretmr_set_mode(enum clock_event_mode mode,
 				struct clock_event_device *evt)
 {
 	switch (mode) {
@@ -285,19 +290,13 @@ static void bfin_timer_set_mode(enum clock_event_mode mode,
 	}
 }
 
-static void bfin_timer_ack(void)
-{
-}
-
-static void __init bfin_timer_init(void)
+void bfin_coretmr_init(void)
 {
 	/* power up the timer, but don't enable it just yet */
 	bfin_write_TCNTL(TMPWR);
 	CSYNC();
 
-	/*
-	 * the TSCALE prescaler counter.
-	 */
+	/* the TSCALE prescaler counter. */
 	bfin_write_TSCALE(TIME_SCALE - 1);
 	bfin_write_TPERIOD(0);
 	bfin_write_TCOUNT(0);
@@ -305,48 +304,54 @@ static void __init bfin_timer_init(void)
 	CSYNC();
 }
 
-static unsigned long  __init bfin_clockevent_check(void)
-{
-	setup_irq(IRQ_CORETMR, &bfin_timer_irq);
-	return get_cclk() / TIME_SCALE;
-}
-
-void __init setup_core_timer(void)
+#ifdef CONFIG_CORE_TIMER_IRQ_L1
+__attribute__((l1_text))
+#endif
+irqreturn_t bfin_coretmr_interrupt(int irq, void *dev_id)
 {
-	bfin_timer_init();
-	bfin_timer_set_mode(CLOCK_EVT_MODE_PERIODIC, NULL);
-}
-#endif /* CONFIG_TICKSOURCE_GPTMR0 */
+	int cpu = smp_processor_id();
+	struct clock_event_device *evt = &per_cpu(coretmr_events, cpu);
 
-/*
- * timer_interrupt() needs to keep up the real-time clock,
- * as well as call the "do_timer()" routine every clocktick
- */
-irqreturn_t timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = dev_id;
 	smp_mb();
 	evt->event_handler(evt);
-	bfin_timer_ack();
-	return IRQ_HANDLED;
-}
-
-static int __init bfin_clockevent_init(void)
-{
-	unsigned long timer_clk;
 
-	timer_clk = bfin_clockevent_check();
+	touch_nmi_watchdog();
 
-	bfin_timer_init();
+	return IRQ_HANDLED;
+}
 
-	clockevent_bfin.mult = div_sc(timer_clk, NSEC_PER_SEC, clockevent_bfin.shift);
-	clockevent_bfin.max_delta_ns = clockevent_delta2ns(-1, &clockevent_bfin);
-	clockevent_bfin.min_delta_ns = clockevent_delta2ns(100, &clockevent_bfin);
-	clockevent_bfin.cpumask = cpumask_of(0);
-	clockevents_register_device(&clockevent_bfin);
+static struct irqaction coretmr_irq = {
+	.name		= "Blackfin CoreTimer",
+	.flags		= IRQF_DISABLED | IRQF_TIMER | \
+			  IRQF_IRQPOLL | IRQF_PERCPU,
+	.handler	= bfin_coretmr_interrupt,
+};
 
-	return 0;
+void bfin_coretmr_clockevent_init(void)
+{
+	unsigned long clock_tick;
+	unsigned int cpu = smp_processor_id();
+	struct clock_event_device *evt = &per_cpu(coretmr_events, cpu);
+
+	evt->name = "bfin_core_timer";
+	evt->rating = 350;
+	evt->irq = -1;
+	evt->shift = 32;
+	evt->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
+	evt->set_next_event = bfin_coretmr_set_next_event;
+	evt->set_mode = bfin_coretmr_set_mode;
+
+	clock_tick = get_cclk() / TIME_SCALE;
+	evt->mult = div_sc(clock_tick, NSEC_PER_SEC, evt->shift);
+	evt->max_delta_ns = clockevent_delta2ns(-1, evt);
+	evt->min_delta_ns = clockevent_delta2ns(100, evt);
+
+	evt->cpumask = cpumask_of(cpu);
+
+	clockevents_register_device(evt);
 }
+#endif /* CONFIG_TICKSOURCE_CORETMR */
+
 
 void __init time_init(void)
 {
@@ -370,5 +375,21 @@ void __init time_init(void)
 
 	bfin_cs_cycles_init();
 	bfin_cs_gptimer0_init();
-	bfin_clockevent_init();
+
+#if defined(CONFIG_TICKSOURCE_CORETMR)
+	bfin_coretmr_init();
+	setup_irq(IRQ_CORETMR, &coretmr_irq);
+	bfin_coretmr_clockevent_init();
+#endif
+
+#if defined(CONFIG_TICKSOURCE_GPTMR0)
+	bfin_gptmr0_init();
+	setup_irq(IRQ_TIMER0, &gptmr0_irq);
+	gptmr0_irq.dev_id = &clockevent_gptmr0;
+	bfin_gptmr0_clockevent_init(&clockevent_gptmr0);
+#endif
+
+#if !defined(CONFIG_TICKSOURCE_CORETMR) && !defined(CONFIG_TICKSOURCE_GPTMR0)
+# error at least one clock event device is required
+#endif
 }
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index d3cbcd6bd985..ba70c4bc2699 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -138,6 +138,12 @@ static void decode_address(char *buf, unsigned long address)
 		if (!mm)
 			continue;
 
+		if (!down_read_trylock(&mm->mmap_sem)) {
+			if (!in_atomic)
+				mmput(mm);
+			continue;
+		}
+
 		for (n = rb_first(&mm->mm_rb); n; n = rb_next(n)) {
 			struct vm_area_struct *vma;
 
@@ -177,6 +183,7 @@ static void decode_address(char *buf, unsigned long address)
 					sprintf(buf, "[ %s vma:0x%lx-0x%lx]",
 						name, vma->vm_start, vma->vm_end);
 
+				up_read(&mm->mmap_sem);
 				if (!in_atomic)
 					mmput(mm);
 
@@ -186,11 +193,16 @@ static void decode_address(char *buf, unsigned long address)
 				goto done;
 			}
 		}
+
+		up_read(&mm->mmap_sem);
 		if (!in_atomic)
 			mmput(mm);
 	}
 
-	/* we were unable to find this address anywhere */
+	/*
+	 * we were unable to find this address anywhere,
+	 * or some MMs were skipped because they were in use.
+	 */
 	sprintf(buf, "/* kernel dynamic memory */");
 
 done:
@@ -248,9 +260,7 @@ asmlinkage notrace void trap_c(struct pt_regs *fp)
 #ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
 	int j;
 #endif
-#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
 	unsigned int cpu = raw_smp_processor_id();
-#endif
 	const char *strerror = NULL;
 	int sig = 0;
 	siginfo_t info;
@@ -639,7 +649,17 @@ asmlinkage notrace void trap_c(struct pt_regs *fp)
 	{
 		info.si_signo = sig;
 		info.si_errno = 0;
-		info.si_addr = (void __user *)fp->pc;
+		switch (trapnr) {
+		case VEC_CPLB_VL:
+		case VEC_MISALI_D:
+		case VEC_CPLB_M:
+		case VEC_CPLB_MHIT:
+			info.si_addr = (void __user *)cpu_pda[cpu].dcplb_fault_addr;
+			break;
+		default:
+			info.si_addr = (void __user *)fp->pc;
+			break;
+		}
 		force_sig_info(sig, &info, current);
 	}
 
@@ -712,7 +732,7 @@ static void decode_instruction(unsigned short *address)
 			verbose_printk("RTE");
 		else if (opcode == 0x0025)
 			verbose_printk("EMUEXCPT");
-		else if (opcode == 0x0040 && opcode <= 0x0047)
+		else if (opcode >= 0x0040 && opcode <= 0x0047)
 			verbose_printk("STI R%i", opcode & 7);
 		else if (opcode >= 0x0050 && opcode <= 0x0057)
 			verbose_printk("JUMP (P%i)", opcode & 7);
@@ -1096,7 +1116,7 @@ void dump_bfin_mem(struct pt_regs *fp)
 			/* And the last RETI points to the current userspace context */
 			if ((fp + 1)->pc >= current->mm->start_code &&
 			    (fp + 1)->pc <= current->mm->end_code) {
-				verbose_printk(KERN_NOTICE "It might be better to look around here : \n");
+				verbose_printk(KERN_NOTICE "It might be better to look around here :\n");
 				verbose_printk(KERN_NOTICE "-------------------------------------------\n");
 				show_regs(fp + 1);
 				verbose_printk(KERN_NOTICE "-------------------------------------------\n");
diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S
index 66799e763dc9..984c78172397 100644
--- a/arch/blackfin/kernel/vmlinux.lds.S
+++ b/arch/blackfin/kernel/vmlinux.lds.S
@@ -15,7 +15,12 @@ _jiffies = _jiffies_64;
 
 SECTIONS
 {
+#ifdef CONFIG_RAMKERNEL
 	. = CONFIG_BOOT_LOAD;
+#else
+	. = CONFIG_ROM_BASE;
+#endif
+
 	/* Neither the text, ro_data or bss section need to be aligned
 	 * So pack them back to back
 	 */
@@ -31,6 +36,12 @@ SECTIONS
 		LOCK_TEXT
 		IRQENTRY_TEXT
 		KPROBES_TEXT
+#ifdef CONFIG_ROMKERNEL
+		__sinittext = .;
+		INIT_TEXT
+		__einittext = .;
+		EXIT_TEXT
+#endif
 		*(.text.*)
 		*(.fixup)
 
@@ -50,8 +61,14 @@ SECTIONS
 
 	/* Just in case the first read only is a 32-bit access */
 	RO_DATA(4)
+	__rodata_end = .;
 
+#ifdef CONFIG_ROMKERNEL
+	. = CONFIG_BOOT_LOAD;
+	.bss : AT(__rodata_end)
+#else
 	.bss :
+#endif
 	{
 		. = ALIGN(4);
 		___bss_start = .;
@@ -67,7 +84,11 @@ SECTIONS
 		___bss_stop = .;
 	}
 
+#if defined(CONFIG_ROMKERNEL)
+	.data : AT(LOADADDR(.bss) + SIZEOF(.bss))
+#else
 	.data :
+#endif
 	{
 		__sdata = .;
 		/* This gets done first, so the glob doesn't suck it in */
@@ -94,6 +115,8 @@ SECTIONS
 
 		__edata = .;
 	}
+	__data_lma = LOADADDR(.data);
+	__data_len = SIZEOF(.data);
 
 	/* The init section should be last, so when we free it, it goes into
 	 * the general memory pool, and (hopefully) will decrease fragmentation
@@ -103,25 +126,58 @@ SECTIONS
 	. = ALIGN(PAGE_SIZE);
 	___init_begin = .;
 
+#ifdef CONFIG_RAMKERNEL
 	INIT_TEXT_SECTION(PAGE_SIZE)
-	. = ALIGN(16);
-	INIT_DATA_SECTION(16)
-	PERCPU(4)
 
-	/* we have to discard exit text and such at runtime, not link time, to
+	/* We have to discard exit text and such at runtime, not link time, to
 	 * handle embedded cross-section references (alt instructions, bug
-	 * table, eh_frame, etc...)
+	 * table, eh_frame, etc...).  We need all of our .text up front and
+	 * .data after it for PCREL call issues.
 	 */
 	.exit.text :
 	{
 		EXIT_TEXT
 	}
+
+	. = ALIGN(16);
+	INIT_DATA_SECTION(16)
+	PERCPU(4)
+
 	.exit.data :
 	{
 		EXIT_DATA
 	}
 
 	.text_l1 L1_CODE_START : AT(LOADADDR(.exit.data) + SIZEOF(.exit.data))
+#else
+	.init.data : AT(__data_lma + __data_len)
+	{
+		__sinitdata = .;
+		INIT_DATA
+		INIT_SETUP(16)
+		INIT_CALLS
+		CON_INITCALL
+		SECURITY_INITCALL
+		INIT_RAM_FS
+
+		. = ALIGN(4);
+		___per_cpu_load = .;
+		___per_cpu_start = .;
+		*(.data.percpu.first)
+		*(.data.percpu.page_aligned)
+		*(.data.percpu)
+		*(.data.percpu.shared_aligned)
+		___per_cpu_end = .;
+
+		EXIT_DATA
+		__einitdata = .;
+	}
+	__init_data_lma = LOADADDR(.init.data);
+	__init_data_len = SIZEOF(.init.data);
+	__init_data_end = .;
+
+	.text_l1 L1_CODE_START : AT(__init_data_lma + __init_data_len)
+#endif
 	{
 		. = ALIGN(4);
 		__stext_l1 = .;
@@ -202,7 +258,11 @@ SECTIONS
 	/* Force trailing alignment of our init section so that when we
 	 * free our init memory, we don't leave behind a partial page.
 	 */
+#ifdef CONFIG_RAMKERNEL
 	. = __l2_lma + __l2_len;
+#else
+	. = __init_data_end;
+#endif
 	. = ALIGN(PAGE_SIZE);
 	___init_end = .;
 
diff --git a/arch/blackfin/mach-bf518/boards/Kconfig b/arch/blackfin/mach-bf518/boards/Kconfig
index 96163514ed22..252261ec04c4 100644
--- a/arch/blackfin/mach-bf518/boards/Kconfig
+++ b/arch/blackfin/mach-bf518/boards/Kconfig
@@ -9,4 +9,9 @@ config BFIN518F_EZBRD
 	help
 	  BF518-EZBRD board support.
 
+config BFIN518F_TCM
+       bool "Bluetechnix TCM-BF518"
+       help
+         Bluetechnix TCM-BF518 board support.
+
 endchoice
diff --git a/arch/blackfin/mach-bf518/boards/Makefile b/arch/blackfin/mach-bf518/boards/Makefile
index 172e859c3a7f..a9ef25c6b302 100644
--- a/arch/blackfin/mach-bf518/boards/Makefile
+++ b/arch/blackfin/mach-bf518/boards/Makefile
@@ -3,3 +3,4 @@
 #
 
 obj-$(CONFIG_BFIN518F_EZBRD)            += ezbrd.o
+obj-$(CONFIG_BFIN518F_TCM)		+= tcm-bf518.o
diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c
index 01975c017116..44d6d5299022 100644
--- a/arch/blackfin/mach-bf518/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf518/boards/ezbrd.c
@@ -382,30 +382,93 @@ static struct platform_device bfin_spi1_device = {
 #endif  /* spi master and devices */
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
 #ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
 	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
+		.start = UART0_THR,
+		.end = UART0_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
 #endif
 #ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
 	{
-		.start = 0xFFC02000,
-		.end = 0xFFC020FF,
+		.start = UART1_THR,
+		.end = UART1_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
-#endif
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_ERROR,
+		.end = IRQ_UART1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_TX,
+		.end = CH_UART1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart1_peripherals[] = {
+	P_UART1_TX, P_UART1_RX, 0
 };
 
-static struct platform_device bfin_uart_device = {
+static struct platform_device bfin_uart1_device = {
 	.name = "bfin-uart",
 	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart_resources),
-	.resource = bfin_uart_resources,
+	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
+	.resource = bfin_uart1_resources,
+	.dev = {
+		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
@@ -499,16 +562,75 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 };
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
 static struct platform_device bfin_sport0_uart_device = {
 	.name = "bfin-sport-uart",
 	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
 };
 
 static struct platform_device bfin_sport1_uart_device = {
 	.name = "bfin-sport-uart",
 	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/input.h>
@@ -593,7 +715,12 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-	&bfin_uart_device,
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
@@ -610,9 +737,13 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
 	&bfin_sport1_uart_device,
 #endif
+#endif
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 	&bfin_device_gpiokeys,
@@ -644,6 +775,33 @@ static int __init ezbrd_init(void)
 
 arch_initcall(ezbrd_init);
 
+static struct platform_device *ezbrd_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(ezbrd_early_devices,
+		ARRAY_SIZE(ezbrd_early_devices));
+}
+
 void native_machine_restart(char *cmd)
 {
 	/* workaround reboot hang when booting from SPI */
diff --git a/arch/blackfin/mach-bf518/boards/tcm-bf518.c b/arch/blackfin/mach-bf518/boards/tcm-bf518.c
new file mode 100644
index 000000000000..9b72e5cb21fe
--- /dev/null
+++ b/arch/blackfin/mach-bf518/boards/tcm-bf518.c
@@ -0,0 +1,753 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/device.h>
+#include <linux/etherdevice.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/reboot.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+#include <asm/bfin_sdh.h>
+#include <linux/spi/ad7877.h>
+#include <net/dsa.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "Bluetechnix TCM-BF518";
+
+/*
+ *  Driver needs to know address, irq and flag pin.
+ */
+
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition tcm_partitions[] = {
+	{
+		.name       = "bootloader(nor)",
+		.size       = 0x40000,
+		.offset     = 0,
+	},
+	{
+		.name       = "linux(nor)",
+		.size       = 0x1C0000,
+		.offset     = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct physmap_flash_data tcm_flash_data = {
+	.width      = 2,
+	.parts      = tcm_partitions,
+	.nr_parts   = ARRAY_SIZE(tcm_partitions),
+};
+
+static struct resource tcm_flash_resource = {
+	.start = 0x20000000,
+	.end   = 0x201fffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device tcm_flash_device = {
+	.name          = "physmap-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &tcm_flash_data,
+	},
+	.num_resources = 1,
+	.resource      = &tcm_flash_resource,
+};
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+	.name = "rtc-bfin",
+	.id   = -1,
+};
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mii_bus = {
+	.name = "bfin_mii_bus",
+};
+
+static struct platform_device bfin_mac_device = {
+	.name = "bfin_mac",
+	.dev.platform_data = &bfin_mii_bus,
+};
+#endif
+
+#if defined(CONFIG_MTD_M25P80) \
+	|| defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x00040000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "linux kernel(spi)",
+		.size = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+	.name = "m25p80",
+	.parts = bfin_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+	.type = "m25p16",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+	.bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_BFIN_SPI_ADC) \
+	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
+/* SPI ADC chip */
+static struct bfin5xx_spi_chip spi_adc_chip_info = {
+	.enable_dma = 1,         /* use dma transfer with this chip*/
+	.bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 16,
+};
+
+static const struct ad7877_platform_data bfin_ad7877_ts_info = {
+	.model			= 7877,
+	.vref_delay_usecs	= 50,	/* internal, no capacitor */
+	.x_plate_ohms		= 419,
+	.y_plate_ohms		= 486,
+	.pressure_max		= 1000,
+	.pressure_min		= 0,
+	.stopacq_polarity	= 1,
+	.first_conversion_delay	= 3,
+	.acquisition_time	= 1,
+	.averaging		= 1,
+	.pen_down_acc_interval	= 1,
+};
+#endif
+
+#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
+	 && defined(CONFIG_SND_SOC_WM8731_SPI)
+static struct bfin5xx_spi_chip spi_wm8731_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+static struct bfin5xx_spi_chip spidev_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 8,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) \
+	|| defined(CONFIG_MTD_M25P80_MODULE)
+	{
+		/* the modalias must be the same as spi device driver name */
+		.modalias = "m25p80", /* Name of spi_driver for this device */
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 2, /* SPI0_SSEL2 */
+		.platform_data = &bfin_spi_flash_data,
+		.controller_data = &spi_flash_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if defined(CONFIG_BFIN_SPI_ADC) \
+	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
+	{
+		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
+		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 1, /* Framework chip select. */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.controller_data = &spi_adc_chip_info,
+	},
+#endif
+
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+	{
+		.modalias = "mmc_spi",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 5,
+		.controller_data = &mmc_spi_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+	{
+		.modalias		= "ad7877",
+		.platform_data		= &bfin_ad7877_ts_info,
+		.irq			= IRQ_PF8,
+		.max_speed_hz	= 12500000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num	= 0,
+		.chip_select  = 2,
+		.controller_data = &spi_ad7877_chip_info,
+	},
+#endif
+#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
+	 && defined(CONFIG_SND_SOC_WM8731_SPI)
+	{
+		.modalias	= "wm8731",
+		.max_speed_hz	= 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num	= 0,
+		.chip_select    = 5,
+		.controller_data = &spi_wm8731_chip_info,
+		.mode = SPI_MODE_0,
+	},
+#endif
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+		.controller_data = &spidev_chip_info,
+	},
+#endif
+#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+	{
+		.modalias = "bfin-lq035q1-spi",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+		.controller_data = &lq035q1_spi_chip_info,
+		.mode = SPI_CPHA | SPI_CPOL,
+	},
+#endif
+};
+
+/* SPI controller data */
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* SPI (0) */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+	.num_chipselect = 6,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+static struct resource bfin_spi0_resource[] = {
+	[0] = {
+		.start = SPI0_REGBASE,
+		.end   = SPI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+		},
+	[1] = {
+		.start = CH_SPI0,
+		.end   = CH_SPI0,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI0,
+		.end   = IRQ_SPI0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_spi0_device = {
+	.name = "bfin-spi",
+	.id = 0, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource = bfin_spi0_resource,
+	.dev = {
+		.platform_data = &bfin_spi0_info, /* Passed to driver */
+	},
+};
+
+/* SPI (1) */
+static struct bfin5xx_spi_master bfin_spi1_info = {
+	.num_chipselect = 5,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
+};
+
+static struct resource bfin_spi1_resource[] = {
+	[0] = {
+		.start = SPI1_REGBASE,
+		.end   = SPI1_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+		},
+	[1] = {
+		.start = CH_SPI1,
+		.end   = CH_SPI1,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI1,
+		.end   = IRQ_SPI1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_spi1_device = {
+	.name = "bfin-spi",
+	.id = 1, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi1_resource),
+	.resource = bfin_spi1_resource,
+	.dev = {
+		.platform_data = &bfin_spi1_info, /* Passed to driver */
+	},
+};
+#endif  /* spi master and devices */
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
+	{
+		.start = UART0_THR,
+		.end = UART0_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
+	{
+		.start = UART1_THR,
+		.end = UART1_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_ERROR,
+		.end = IRQ_UART1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_TX,
+		.end = CH_UART1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart1_peripherals[] = {
+	P_UART1_TX, P_UART1_RX, 0
+};
+
+static struct platform_device bfin_uart1_device = {
+	.name = "bfin-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
+	.resource = bfin_uart1_resources,
+	.dev = {
+		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir0_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
+	.resource = bfin_sir0_resources,
+};
+#endif
+#ifdef CONFIG_BFIN_SIR1
+static struct resource bfin_sir1_resources[] = {
+	{
+		.start = 0xFFC02000,
+		.end = 0xFFC020FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir1_device = {
+	.name = "bfin_sir",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sir1_resources),
+	.resource = bfin_sir1_resources,
+};
+#endif
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+static struct resource bfin_twi0_resource[] = {
+	[0] = {
+		.start = TWI0_REGBASE,
+		.end   = TWI0_REGBASE,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TWI,
+		.end   = IRQ_TWI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2c_bfin_twi_device = {
+	.name = "i2c-bfin-twi",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_twi0_resource),
+	.resource = bfin_twi0_resource,
+};
+#endif
+
+static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
+	{
+		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
+	},
+#endif
+#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
+	{
+		I2C_BOARD_INFO("pcf8574_keypad", 0x27),
+		.irq = IRQ_PF8,
+	},
+#endif
+};
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
+static struct platform_device bfin_sport0_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+static struct gpio_keys_button bfin_gpio_keys_table[] = {
+	{BTN_0, GPIO_PG0, 1, "gpio-keys: BTN0"},
+	{BTN_1, GPIO_PG13, 1, "gpio-keys: BTN1"},
+};
+
+static struct gpio_keys_platform_data bfin_gpio_keys_data = {
+	.buttons        = bfin_gpio_keys_table,
+	.nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
+};
+
+static struct platform_device bfin_device_gpiokeys = {
+	.name      = "gpio-keys",
+	.dev = {
+		.platform_data = &bfin_gpio_keys_data,
+	},
+};
+#endif
+
+#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
+
+static struct bfin_sd_host bfin_sdh_data = {
+	.dma_chan = CH_RSI,
+	.irq_int0 = IRQ_RSI_INT0,
+	.pin_req = {P_RSI_DATA0, P_RSI_DATA1, P_RSI_DATA2, P_RSI_DATA3, P_RSI_CMD, P_RSI_CLK, 0},
+};
+
+static struct platform_device bf51x_sdh_device = {
+	.name = "bfin-sdh",
+	.id = 0,
+	.dev = {
+		.platform_data = &bfin_sdh_data,
+	},
+};
+#endif
+
+static const unsigned int cclk_vlev_datasheet[] =
+{
+	VRPAIR(VLEV_100, 400000000),
+	VRPAIR(VLEV_105, 426000000),
+	VRPAIR(VLEV_110, 500000000),
+	VRPAIR(VLEV_115, 533000000),
+	VRPAIR(VLEV_120, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+	},
+};
+
+static struct platform_device *tcm_devices[] __initdata = {
+
+	&bfin_dpmc,
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+	&rtc_device,
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+	&bfin_mii_bus,
+	&bfin_mac_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+	&bfin_spi0_device,
+	&bfin_spi1_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#ifdef CONFIG_BFIN_SIR0
+	&bfin_sir0_device,
+#endif
+#ifdef CONFIG_BFIN_SIR1
+	&bfin_sir1_device,
+#endif
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+	&i2c_bfin_twi_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+	&bfin_device_gpiokeys,
+#endif
+
+#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
+	&bf51x_sdh_device,
+#endif
+
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+	&tcm_flash_device,
+#endif
+};
+
+static int __init tcm_init(void)
+{
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+	i2c_register_board_info(0, bfin_i2c_board_info,
+				ARRAY_SIZE(bfin_i2c_board_info));
+	platform_add_devices(tcm_devices, ARRAY_SIZE(tcm_devices));
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+	return 0;
+}
+
+arch_initcall(tcm_init);
+
+static struct platform_device *tcm_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(tcm_early_devices,
+		ARRAY_SIZE(tcm_early_devices));
+}
+
+void native_machine_restart(char *cmd)
+{
+	/* workaround reboot hang when booting from SPI */
+	if ((bfin_read_SYSCR() & 0x7) == 0x3)
+		bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
+}
+
+void bfin_get_ether_addr(char *addr)
+{
+	random_ether_addr(addr);
+	printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
+}
+EXPORT_SYMBOL(bfin_get_ether_addr);
diff --git a/arch/blackfin/mach-bf518/include/mach/irq.h b/arch/blackfin/mach-bf518/include/mach/irq.h
index 14e52ec7afa5..435e76e31aaa 100644
--- a/arch/blackfin/mach-bf518/include/mach/irq.h
+++ b/arch/blackfin/mach-bf518/include/mach/irq.h
@@ -151,7 +151,17 @@
 
 #define GPIO_IRQ_BASE	IRQ_PF0
 
-#define NR_IRQS     (IRQ_PH15 + 1)
+#define IRQ_MAC_PHYINT		119 /* PHY_INT Interrupt */
+#define IRQ_MAC_MMCINT		120 /* MMC Counter Interrupt */
+#define IRQ_MAC_RXFSINT		121 /* RX Frame-Status Interrupt */
+#define IRQ_MAC_TXFSINT		122 /* TX Frame-Status Interrupt */
+#define IRQ_MAC_WAKEDET		123 /* Wake-Up Interrupt */
+#define IRQ_MAC_RXDMAERR	124 /* RX DMA Direction Error Interrupt */
+#define IRQ_MAC_TXDMAERR	125 /* TX DMA Direction Error Interrupt */
+#define IRQ_MAC_STMDONE		126 /* Station Mgt. Transfer Done Interrupt */
+
+#define NR_MACH_IRQS	(IRQ_MAC_STMDONE + 1)
+#define NR_IRQS		(NR_MACH_IRQS + NR_SPARE_IRQS)
 
 #define IVG7            7
 #define IVG8            8
diff --git a/arch/blackfin/mach-bf518/include/mach/mem_map.h b/arch/blackfin/mach-bf518/include/mach/mem_map.h
index 3c6777cb3532..073b5d73d391 100644
--- a/arch/blackfin/mach-bf518/include/mach/mem_map.h
+++ b/arch/blackfin/mach-bf518/include/mach/mem_map.h
@@ -41,7 +41,7 @@
 #define L1_DATA_A_START		0xFF800000
 #define L1_DATA_B_START		0xFF900000
 
-#define L1_CODE_LENGTH		0xC000
+#define L1_CODE_LENGTH		0x8000
 
 #ifdef CONFIG_BFIN_DCACHE
 
diff --git a/arch/blackfin/mach-bf527/boards/Kconfig b/arch/blackfin/mach-bf527/boards/Kconfig
index df224d04e167..b14c28810a44 100644
--- a/arch/blackfin/mach-bf527/boards/Kconfig
+++ b/arch/blackfin/mach-bf527/boards/Kconfig
@@ -9,6 +9,11 @@ config BFIN527_EZKIT
 	help
 	  BF527-EZKIT-LITE board support.
 
+config BFIN527_EZKIT_V2
+	bool "BF527-EZKIT-V2"
+	help
+	  BF527-EZKIT-LITE V2.1+ board support.
+
 config BFIN527_BLUETECHNIX_CM
 	bool "Bluetechnix CM-BF527"
 	help
diff --git a/arch/blackfin/mach-bf527/boards/Makefile b/arch/blackfin/mach-bf527/boards/Makefile
index eb6ed3362f9f..51a5817c4a90 100644
--- a/arch/blackfin/mach-bf527/boards/Makefile
+++ b/arch/blackfin/mach-bf527/boards/Makefile
@@ -3,5 +3,6 @@
 #
 
 obj-$(CONFIG_BFIN527_EZKIT)            += ezkit.o
+obj-$(CONFIG_BFIN527_EZKIT_V2)         += ezkit.o
 obj-$(CONFIG_BFIN527_BLUETECHNIX_CM)   += cm_bf527.o
 obj-$(CONFIG_BFIN526_EZBRD)            += ezbrd.o
diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index 7ab0800e2914..ebe76d1e874a 100644
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -18,7 +18,6 @@
 #include <linux/i2c.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
-#include <linux/usb/sl811.h>
 #include <linux/usb/musb.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
@@ -270,50 +269,6 @@ static struct platform_device dm9000_device = {
 };
 #endif
 
-#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
-static struct resource sl811_hcd_resources[] = {
-	{
-		.start = 0x20340000,
-		.end = 0x20340000,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 0x20340004,
-		.end = 0x20340004,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = CONFIG_USB_SL811_BFIN_IRQ,
-		.end = CONFIG_USB_SL811_BFIN_IRQ,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-};
-
-#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
-void sl811_port_power(struct device *dev, int is_on)
-{
-	gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
-	gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on);
-}
-#endif
-
-static struct sl811_platform_data sl811_priv = {
-	.potpg = 10,
-	.power = 250,       /* == 500mA */
-#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
-	.port_power = &sl811_port_power,
-#endif
-};
-
-static struct platform_device sl811_hcd_device = {
-	.name = "sl811-hcd",
-	.id = 0,
-	.dev = {
-		.platform_data = &sl811_priv,
-	},
-	.num_resources = ARRAY_SIZE(sl811_hcd_resources),
-	.resource = sl811_hcd_resources,
-};
-#endif
-
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 static struct platform_device bfin_mii_bus = {
 	.name = "bfin_mii_bus",
@@ -384,8 +339,8 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) \
-	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) \
+	|| defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 16,
@@ -462,8 +417,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) \
-	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) \
+	|| defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 	{
 		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -603,30 +558,105 @@ static struct platform_device cm_flash_device = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
 #ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
 	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
+		.start = UART0_THR,
+		.end = UART0_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
 #endif
 #ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
 	{
-		.start = 0xFFC02000,
-		.end = 0xFFC020FF,
+		.start = UART1_THR,
+		.end = UART1_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_ERROR,
+		.end = IRQ_UART1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_TX,
+		.end = CH_UART1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+#ifdef CONFIG_BFIN_UART1_CTSRTS
+	{	/* CTS pin */
+		.start = GPIO_PF9,
+		.end = GPIO_PF9,
+		.flags = IORESOURCE_IO,
+	},
+	{	/* RTS pin */
+		.start = GPIO_PF10,
+		.end = GPIO_PF10,
+		.flags = IORESOURCE_IO,
+	},
 #endif
 };
 
-static struct platform_device bfin_uart_device = {
+unsigned short bfin_uart1_peripherals[] = {
+	P_UART1_TX, P_UART1_RX, 0
+};
+
+static struct platform_device bfin_uart1_device = {
 	.name = "bfin-uart",
 	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart_resources),
-	.resource = bfin_uart_resources,
+	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
+	.resource = bfin_uart1_resources,
+	.dev = {
+		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
@@ -725,16 +755,75 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 };
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
 static struct platform_device bfin_sport0_uart_device = {
 	.name = "bfin-sport-uart",
 	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
 };
 
 static struct platform_device bfin_sport1_uart_device = {
 	.name = "bfin-sport-uart",
 	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/input.h>
@@ -795,10 +884,6 @@ static struct platform_device *cmbf527_devices[] __initdata = {
 	&rtc_device,
 #endif
 
-#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
-	&sl811_hcd_device,
-#endif
-
 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
 	&bfin_isp1760_device,
 #endif
@@ -829,7 +914,12 @@ static struct platform_device *cmbf527_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-	&bfin_uart_device,
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
@@ -846,9 +936,13 @@ static struct platform_device *cmbf527_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
 	&bfin_sport1_uart_device,
 #endif
+#endif
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 	&bfin_device_gpiokeys,
@@ -871,6 +965,33 @@ static int __init cm_init(void)
 
 arch_initcall(cm_init);
 
+static struct platform_device *cmbf527_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(cmbf527_early_devices,
+		ARRAY_SIZE(cmbf527_early_devices));
+}
+
 void native_machine_restart(char *cmd)
 {
 	/* workaround reboot hang when booting from SPI */
diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c
index cad23b15d83c..55069af4f67d 100644
--- a/arch/blackfin/mach-bf527/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf527/boards/ezbrd.c
@@ -274,8 +274,8 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = {
 	.median			= 2,	/* do 8 measurements */
 	.averaging 		= 1,	/* take the average of 4 middle samples */
 	.pen_down_acc_interval 	= 255,	/* 9.4 ms */
-	.gpio_output		= 1,	/* configure AUX/VBAT/GPIO as GPIO output */
-	.gpio_default 		= 1,	/* During initialization set GPIO = HIGH */
+	.gpio_export		= 1,	/* Export GPIO to gpiolib */
+	.gpio_base		= -1,	/* Dynamic allocation */
 };
 #endif
 
@@ -439,30 +439,105 @@ static struct platform_device bfin_spi0_device = {
 #endif  /* spi master and devices */
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
 #ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
 	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
+		.start = UART0_THR,
+		.end = UART0_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
 #endif
 #ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
 	{
-		.start = 0xFFC02000,
-		.end = 0xFFC020FF,
+		.start = UART1_THR,
+		.end = UART1_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_ERROR,
+		.end = IRQ_UART1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_TX,
+		.end = CH_UART1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+#ifdef CONFIG_BFIN_UART1_CTSRTS
+	{	/* CTS pin */
+		.start = GPIO_PG0,
+		.end = GPIO_PG0,
+		.flags = IORESOURCE_IO,
+	},
+	{	/* RTS pin */
+		.start = GPIO_PF10,
+		.end = GPIO_PF10,
+		.flags = IORESOURCE_IO,
+	},
 #endif
 };
 
-static struct platform_device bfin_uart_device = {
+unsigned short bfin_uart1_peripherals[] = {
+	P_UART1_TX, P_UART1_RX, 0
+};
+
+static struct platform_device bfin_uart1_device = {
 	.name = "bfin-uart",
 	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart_resources),
-	.resource = bfin_uart_resources,
+	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
+	.resource = bfin_uart1_resources,
+	.dev = {
+		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
@@ -556,16 +631,75 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 };
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
 static struct platform_device bfin_sport0_uart_device = {
 	.name = "bfin-sport-uart",
 	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
 };
 
 static struct platform_device bfin_sport1_uart_device = {
 	.name = "bfin-sport-uart",
 	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/input.h>
@@ -615,9 +749,10 @@ static struct platform_device bfin_dpmc = {
 #include <asm/bfin-lq035q1.h>
 
 static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
-	.mode = 	LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
-	.use_bl = 	1,
-	.gpio_bl =	GPIO_PG12,
+	.mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
+	.ppi_mode = USE_RGB565_16_BIT_PPI,
+	.use_bl = 1,
+	.gpio_bl = GPIO_PG12,
 };
 
 static struct resource bfin_lq035q1_resources[] = {
@@ -665,7 +800,12 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-	&bfin_uart_device,
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
 #endif
 
 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
@@ -686,9 +826,13 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
 	&bfin_sport1_uart_device,
 #endif
+#endif
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 	&bfin_device_gpiokeys,
@@ -711,6 +855,33 @@ static int __init ezbrd_init(void)
 
 arch_initcall(ezbrd_init);
 
+static struct platform_device *ezbrd_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(ezbrd_early_devices,
+		ARRAY_SIZE(ezbrd_early_devices));
+}
+
 void native_machine_restart(char *cmd)
 {
 	/* workaround reboot hang when booting from SPI */
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 5294fdd20732..923383386aa1 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -16,8 +16,9 @@
 #include <linux/i2c.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
-#include <linux/usb/sl811.h>
 #include <linux/usb/musb.h>
+#include <linux/leds.h>
+#include <linux/input.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/reboot.h>
@@ -29,7 +30,11 @@
 /*
  * Name the Board for the /proc/cpuinfo
  */
+#ifdef CONFIG_BFIN527_EZKIT_V2
+const char bfin_board_name[] = "ADI BF527-EZKIT V2";
+#else
 const char bfin_board_name[] = "ADI BF527-EZKIT";
+#endif
 
 /*
  *  Driver needs to know address, irq and flag pin.
@@ -143,6 +148,33 @@ static struct platform_device bf52x_t350mcqb_device = {
 };
 #endif
 
+#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+#include <asm/bfin-lq035q1.h>
+
+static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
+	.mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
+	.ppi_mode = USE_RGB565_8_BIT_PPI,
+};
+
+static struct resource bfin_lq035q1_resources[] = {
+	{
+		.start = IRQ_PPI_ERROR,
+		.end = IRQ_PPI_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_lq035q1_device = {
+	.name		= "bfin-lq035q1",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(bfin_lq035q1_resources),
+	.resource	= bfin_lq035q1_resources,
+	.dev		= {
+		.platform_data = &bfin_lq035q1_data,
+	},
+};
+#endif
+
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 static struct mtd_partition ezkit_partitions[] = {
 	{
@@ -326,50 +358,6 @@ static struct platform_device dm9000_device = {
 };
 #endif
 
-#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
-static struct resource sl811_hcd_resources[] = {
-	{
-		.start = 0x20340000,
-		.end = 0x20340000,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 0x20340004,
-		.end = 0x20340004,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = CONFIG_USB_SL811_BFIN_IRQ,
-		.end = CONFIG_USB_SL811_BFIN_IRQ,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-};
-
-#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
-void sl811_port_power(struct device *dev, int is_on)
-{
-	gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
-	gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on);
-}
-#endif
-
-static struct sl811_platform_data sl811_priv = {
-	.potpg = 10,
-	.power = 250,       /* == 500mA */
-#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
-	.port_power = &sl811_port_power,
-#endif
-};
-
-static struct platform_device sl811_hcd_device = {
-	.name = "sl811-hcd",
-	.id = 0,
-	.dev = {
-		.platform_data = &sl811_priv,
-	},
-	.num_resources = ARRAY_SIZE(sl811_hcd_resources),
-	.resource = sl811_hcd_resources,
-};
-#endif
-
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 static struct platform_device bfin_mii_bus = {
 	.name = "bfin_mii_bus",
@@ -440,8 +428,8 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) \
-	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) \
+	|| defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 16,
@@ -488,8 +476,7 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = {
 	.median			= 2,	/* do 8 measurements */
 	.averaging 		= 1,	/* take the average of 4 middle samples */
 	.pen_down_acc_interval 	= 255,	/* 9.4 ms */
-	.gpio_output		= 1,	/* configure AUX/VBAT/GPIO as GPIO output */
-	.gpio_default 		= 1,	/* During initialization set GPIO = HIGH */
+	.gpio_export		= 0,	/* Export GPIO to gpiolib */
 };
 #endif
 
@@ -500,14 +487,6 @@ static struct bfin5xx_spi_chip spi_ad7879_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
-	 && defined(CONFIG_SND_SOC_WM8731_SPI)
-static struct bfin5xx_spi_chip spi_wm8731_chip_info = {
-	.enable_dma = 0,
-	.bits_per_word = 16,
-};
-#endif
-
 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 static struct bfin5xx_spi_chip spidev_chip_info = {
 	.enable_dma = 0,
@@ -515,6 +494,29 @@ static struct bfin5xx_spi_chip spidev_chip_info = {
 };
 #endif
 
+#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+static struct platform_device bfin_i2s = {
+	.name = "bfin-i2s",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	/* TODO: add platform data here */
+};
+#endif
+
+#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
+static struct platform_device bfin_tdm = {
+	.name = "bfin-tdm",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	/* TODO: add platform data here */
+};
+#endif
+
+#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+static struct bfin5xx_spi_chip lq035q1_spi_chip_info = {
+	.enable_dma	= 0,
+	.bits_per_word	= 8,
+};
+#endif
+
 static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #if defined(CONFIG_MTD_M25P80) \
 	|| defined(CONFIG_MTD_M25P80_MODULE)
@@ -542,8 +544,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) \
-	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) \
+	|| defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 	{
 		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -586,17 +588,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_CPHA | SPI_CPOL,
 	},
 #endif
-#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
-	 && defined(CONFIG_SND_SOC_WM8731_SPI)
-	{
-		.modalias	= "wm8731",
-		.max_speed_hz	= 3125000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num	= 0,
-		.chip_select    = 5,
-		.controller_data = &spi_wm8731_chip_info,
-		.mode = SPI_MODE_0,
-	},
-#endif
 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 	{
 		.modalias = "spidev",
@@ -606,6 +597,16 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.controller_data = &spidev_chip_info,
 	},
 #endif
+#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+	{
+		.modalias = "bfin-lq035q1-spi",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 7,
+		.controller_data = &lq035q1_spi_chip_info,
+		.mode = SPI_CPHA | SPI_CPOL,
+	},
+#endif
 };
 
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
@@ -647,30 +648,105 @@ static struct platform_device bfin_spi0_device = {
 #endif  /* spi master and devices */
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
 #ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
 	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
+		.start = UART0_THR,
+		.end = UART0_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
 #endif
 #ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
 	{
-		.start = 0xFFC02000,
-		.end = 0xFFC020FF,
+		.start = UART1_THR,
+		.end = UART1_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_ERROR,
+		.end = IRQ_UART1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_TX,
+		.end = CH_UART1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+#ifdef CONFIG_BFIN_UART1_CTSRTS
+	{	/* CTS pin */
+		.start = GPIO_PF9,
+		.end = GPIO_PF9,
+		.flags = IORESOURCE_IO,
+	},
+	{	/* RTS pin */
+		.start = GPIO_PF10,
+		.end = GPIO_PF10,
+		.flags = IORESOURCE_IO,
+	},
 #endif
 };
 
-static struct platform_device bfin_uart_device = {
+unsigned short bfin_uart1_peripherals[] = {
+	P_UART1_TX, P_UART1_RX, 0
+};
+
+static struct platform_device bfin_uart1_device = {
 	.name = "bfin-uart",
 	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart_resources),
-	.resource = bfin_uart_resources,
+	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
+	.resource = bfin_uart1_resources,
+	.dev = {
+		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
@@ -749,6 +825,71 @@ static struct platform_device i2c_bfin_twi_device = {
 };
 #endif
 
+#if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
+#include <linux/mfd/adp5520.h>
+
+	/*
+	 *  ADP5520/5501 LEDs Data
+	 */
+
+static struct led_info adp5520_leds[] = {
+	{
+		.name = "adp5520-led1",
+		.default_trigger = "none",
+		.flags = FLAG_ID_ADP5520_LED1_ADP5501_LED0 | ADP5520_LED_OFFT_600ms,
+	},
+};
+
+static struct adp5520_leds_platform_data adp5520_leds_data = {
+	.num_leds = ARRAY_SIZE(adp5520_leds),
+	.leds = adp5520_leds,
+	.fade_in = ADP5520_FADE_T_600ms,
+	.fade_out = ADP5520_FADE_T_600ms,
+	.led_on_time = ADP5520_LED_ONT_600ms,
+};
+
+	/*
+	 *  ADP5520 Keypad Data
+	 */
+
+static const unsigned short adp5520_keymap[ADP5520_KEYMAPSIZE] = {
+	[ADP5520_KEY(3, 3)]	= KEY_1,
+	[ADP5520_KEY(2, 3)]	= KEY_2,
+	[ADP5520_KEY(1, 3)]	= KEY_3,
+	[ADP5520_KEY(0, 3)]	= KEY_UP,
+	[ADP5520_KEY(3, 2)]	= KEY_4,
+	[ADP5520_KEY(2, 2)]	= KEY_5,
+	[ADP5520_KEY(1, 2)]	= KEY_6,
+	[ADP5520_KEY(0, 2)]	= KEY_DOWN,
+	[ADP5520_KEY(3, 1)]	= KEY_7,
+	[ADP5520_KEY(2, 1)]	= KEY_8,
+	[ADP5520_KEY(1, 1)]	= KEY_9,
+	[ADP5520_KEY(0, 1)]	= KEY_DOT,
+	[ADP5520_KEY(3, 0)]	= KEY_BACKSPACE,
+	[ADP5520_KEY(2, 0)]	= KEY_0,
+	[ADP5520_KEY(1, 0)]	= KEY_HELP,
+	[ADP5520_KEY(0, 0)]	= KEY_ENTER,
+};
+
+static struct adp5520_keys_platform_data adp5520_keys_data = {
+	.rows_en_mask	= ADP5520_ROW_R3 | ADP5520_ROW_R2 | ADP5520_ROW_R1 | ADP5520_ROW_R0,
+	.cols_en_mask	= ADP5520_COL_C3 | ADP5520_COL_C2 | ADP5520_COL_C1 | ADP5520_COL_C0,
+	.keymap		= adp5520_keymap,
+	.keymapsize	= ARRAY_SIZE(adp5520_keymap),
+	.repeat		= 0,
+};
+
+	/*
+	 *  ADP5520/5501 Multifuction Device Init Data
+	 */
+
+static struct adp5520_platform_data adp5520_pdev_data = {
+	.leds = &adp5520_leds_data,
+	.keys = &adp5520_keys_data,
+};
+
+#endif
+
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
 	{
@@ -766,22 +907,99 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 		I2C_BOARD_INFO("bfin-adv7393", 0x2B),
 	},
 #endif
+#if defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE)
+	{
+		I2C_BOARD_INFO("ad7879", 0x2C),
+		.irq = IRQ_PF8,
+		.platform_data = (void *)&bfin_ad7879_ts_info,
+	},
+#endif
+#if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
+	{
+		I2C_BOARD_INFO("pmic-adp5520", 0x32),
+		.irq = IRQ_PF9,
+		.platform_data = (void *)&adp5520_pdev_data,
+	},
+#endif
+#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE)
+	{
+		I2C_BOARD_INFO("ssm2602", 0x1b),
+	},
+#endif
 };
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
 static struct platform_device bfin_sport0_uart_device = {
 	.name = "bfin-sport-uart",
 	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
 };
 
 static struct platform_device bfin_sport1_uart_device = {
 	.name = "bfin-sport-uart",
 	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-#include <linux/input.h>
 #include <linux/gpio_keys.h>
 
 static struct gpio_keys_button bfin_gpio_keys_table[] = {
@@ -803,7 +1021,6 @@ static struct platform_device bfin_device_gpiokeys = {
 #endif
 
 #if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
-#include <linux/input.h>
 #include <asm/bfin_rotary.h>
 
 static struct bfin_rotary_platform_data bfin_rotary_data = {
@@ -872,10 +1089,6 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&rtc_device,
 #endif
 
-#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
-	&sl811_hcd_device,
-#endif
-
 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
 	&bfin_isp1760_device,
 #endif
@@ -909,8 +1122,17 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&bf52x_t350mcqb_device,
 #endif
 
+#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+	&bfin_lq035q1_device,
+#endif
+
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-	&bfin_uart_device,
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
@@ -927,9 +1149,13 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
 	&bfin_sport1_uart_device,
 #endif
+#endif
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 	&bfin_device_gpiokeys,
@@ -942,6 +1168,14 @@ static struct platform_device *stamp_devices[] __initdata = {
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 	&ezkit_flash_device,
 #endif
+
+#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+	&bfin_i2s,
+#endif
+
+#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
+	&bfin_tdm,
+#endif
 };
 
 static int __init ezkit_init(void)
@@ -956,6 +1190,33 @@ static int __init ezkit_init(void)
 
 arch_initcall(ezkit_init);
 
+static struct platform_device *ezkit_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(ezkit_early_devices,
+		ARRAY_SIZE(ezkit_early_devices));
+}
+
 void native_machine_restart(char *cmd)
 {
 	/* workaround reboot hang when booting from SPI */
diff --git a/arch/blackfin/mach-bf527/include/mach/irq.h b/arch/blackfin/mach-bf527/include/mach/irq.h
index aa6579a64a2f..704d9253e41d 100644
--- a/arch/blackfin/mach-bf527/include/mach/irq.h
+++ b/arch/blackfin/mach-bf527/include/mach/irq.h
@@ -151,7 +151,17 @@
 
 #define GPIO_IRQ_BASE	IRQ_PF0
 
-#define NR_IRQS     (IRQ_PH15+1)
+#define IRQ_MAC_PHYINT		119 /* PHY_INT Interrupt */
+#define IRQ_MAC_MMCINT		120 /* MMC Counter Interrupt */
+#define IRQ_MAC_RXFSINT		121 /* RX Frame-Status Interrupt */
+#define IRQ_MAC_TXFSINT		122 /* TX Frame-Status Interrupt */
+#define IRQ_MAC_WAKEDET		123 /* Wake-Up Interrupt */
+#define IRQ_MAC_RXDMAERR	124 /* RX DMA Direction Error Interrupt */
+#define IRQ_MAC_TXDMAERR	125 /* TX DMA Direction Error Interrupt */
+#define IRQ_MAC_STMDONE		126 /* Station Mgt. Transfer Done Interrupt */
+
+#define NR_MACH_IRQS	(IRQ_MAC_STMDONE + 1)
+#define NR_IRQS		(NR_MACH_IRQS + NR_SPARE_IRQS)
 
 #define IVG7            7
 #define IVG8            8
diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c
index 4adceb0bdb6d..175371af0692 100644
--- a/arch/blackfin/mach-bf533/boards/H8606.c
+++ b/arch/blackfin/mach-bf533/boards/H8606.c
@@ -171,7 +171,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 16,
@@ -206,7 +206,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 	{
 		.modalias = "ad1836",
 		.max_speed_hz = 16,
@@ -257,21 +257,50 @@ static struct platform_device bfin_spi0_device = {
 #endif  /* spi master and devices */
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
 	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
+		.start = BFIN_UART_THR,
+		.end = BFIN_UART_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX + 1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
 };
 
-static struct platform_device bfin_uart_device = {
+static struct platform_device bfin_uart0_device = {
 	.name = "bfin-uart",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart_resources),
-	.resource = bfin_uart_resources,
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
@@ -394,7 +423,9 @@ static struct platform_device *h8606_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-	&bfin_uart_device,
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
 #endif
 
 #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
@@ -424,3 +455,18 @@ static int __init H8606_init(void)
 }
 
 arch_initcall(H8606_init);
+
+static struct platform_device *H8606_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(H8606_early_devices,
+		ARRAY_SIZE(H8606_early_devices));
+}
diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c
index b580884848d4..842b4fa76ea9 100644
--- a/arch/blackfin/mach-bf533/boards/blackstamp.c
+++ b/arch/blackfin/mach-bf533/boards/blackstamp.c
@@ -195,21 +195,50 @@ static struct platform_device bfin_spi0_device = {
 #endif  /* spi master and devices */
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
 	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
+		.start = BFIN_UART_THR,
+		.end = BFIN_UART_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX + 1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
 };
 
-static struct platform_device bfin_uart_device = {
+static struct platform_device bfin_uart0_device = {
 	.name = "bfin-uart",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart_resources),
-	.resource = bfin_uart_resources,
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
@@ -241,16 +270,75 @@ static struct platform_device bfin_sir0_device = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
 static struct platform_device bfin_sport0_uart_device = {
 	.name = "bfin-sport-uart",
 	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
 };
 
 static struct platform_device bfin_sport1_uart_device = {
 	.name = "bfin-sport-uart",
 	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/input.h>
@@ -344,7 +432,9 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-	&bfin_uart_device,
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
@@ -354,9 +444,13 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
 	&bfin_sport1_uart_device,
 #endif
+#endif
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 	&bfin_device_gpiokeys,
@@ -392,3 +486,27 @@ static int __init blackstamp_init(void)
 }
 
 arch_initcall(blackstamp_init);
+
+static struct platform_device *stamp_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(stamp_early_devices,
+		ARRAY_SIZE(stamp_early_devices));
+}
diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
index 7fc3b860d4ae..fdcde61906dc 100644
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -71,7 +71,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 16,
@@ -110,7 +110,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 	{
 		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -242,21 +242,50 @@ static struct platform_device smsc911x_device = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
 	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
+		.start = BFIN_UART_THR,
+		.end = BFIN_UART_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX + 1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
 };
 
-static struct platform_device bfin_uart_device = {
+static struct platform_device bfin_uart0_device = {
 	.name = "bfin-uart",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart_resources),
-	.resource = bfin_uart_resources,
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
@@ -288,16 +317,75 @@ static struct platform_device bfin_sir0_device = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
 static struct platform_device bfin_sport0_uart_device = {
 	.name = "bfin-sport-uart",
 	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
 };
 
 static struct platform_device bfin_sport1_uart_device = {
 	.name = "bfin-sport-uart",
 	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 static struct resource isp1362_hcd_resources[] = {
@@ -432,7 +520,9 @@ static struct platform_device *cm_bf533_devices[] __initdata = {
 	&bfin_dpmc,
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-	&bfin_uart_device,
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
@@ -442,9 +532,13 @@ static struct platform_device *cm_bf533_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
 	&bfin_sport1_uart_device,
 #endif
+#endif
 
 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
 	&rtc_device,
@@ -486,3 +580,27 @@ static int __init cm_bf533_init(void)
 }
 
 arch_initcall(cm_bf533_init);
+
+static struct platform_device *cm_bf533_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(cm_bf533_early_devices,
+		ARRAY_SIZE(cm_bf533_early_devices));
+}
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index d4689dcc198e..739773cb7fc6 100644
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -222,7 +222,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 16,
@@ -261,7 +261,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 	{
 		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -320,21 +320,50 @@ static struct platform_device bfin_spi0_device = {
 #endif  /* spi master and devices */
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
 	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
+		.start = BFIN_UART_THR,
+		.end = BFIN_UART_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX + 1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
 };
 
-static struct platform_device bfin_uart_device = {
+static struct platform_device bfin_uart0_device = {
 	.name = "bfin-uart",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart_resources),
-	.resource = bfin_uart_resources,
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
@@ -444,6 +473,30 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 #endif
 };
 
+#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+static struct platform_device bfin_i2s = {
+	.name = "bfin-i2s",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	/* TODO: add platform data here */
+};
+#endif
+
+#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
+static struct platform_device bfin_tdm = {
+	.name = "bfin-tdm",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	/* TODO: add platform data here */
+};
+#endif
+
+#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+static struct platform_device bfin_ac97 = {
+	.name = "bfin-ac97",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	/* TODO: add platform data here */
+};
+#endif
+
 static struct platform_device *ezkit_devices[] __initdata = {
 
 	&bfin_dpmc,
@@ -471,7 +524,9 @@ static struct platform_device *ezkit_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-	&bfin_uart_device,
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
@@ -487,6 +542,18 @@ static struct platform_device *ezkit_devices[] __initdata = {
 #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
 	&i2c_gpio_device,
 #endif
+
+#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+	&bfin_i2s,
+#endif
+
+#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
+	&bfin_tdm,
+#endif
+
+#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+	&bfin_ac97,
+#endif
 };
 
 static int __init ezkit_init(void)
@@ -500,3 +567,18 @@ static int __init ezkit_init(void)
 }
 
 arch_initcall(ezkit_init);
+
+static struct platform_device *ezkit_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(ezkit_early_devices,
+		ARRAY_SIZE(ezkit_early_devices));
+}
diff --git a/arch/blackfin/mach-bf533/boards/ip0x.c b/arch/blackfin/mach-bf533/boards/ip0x.c
index 8ec42ba35b9e..7349970db978 100644
--- a/arch/blackfin/mach-bf533/boards/ip0x.c
+++ b/arch/blackfin/mach-bf533/boards/ip0x.c
@@ -19,6 +19,7 @@
 #include <linux/usb/isp1362.h>
 #endif
 #include <asm/irq.h>
+#include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/portmux.h>
 
@@ -143,21 +144,50 @@ static struct platform_device spi_bfin_master_device = {
 #endif  /* spi master and devices */
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
 	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
+		.start = BFIN_UART_THR,
+		.end = BFIN_UART_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX + 1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
 };
 
-static struct platform_device bfin_uart_device = {
+static struct platform_device bfin_uart0_device = {
 	.name = "bfin-uart",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart_resources),
-	.resource = bfin_uart_resources,
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
@@ -241,7 +271,9 @@ static struct platform_device *ip0x_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-	&bfin_uart_device,
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
@@ -276,3 +308,18 @@ static int __init ip0x_init(void)
 }
 
 arch_initcall(ip0x_init);
+
+static struct platform_device *ip0x_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(ip0x_early_devices,
+		ARRAY_SIZE(ip0x_early_devices));
+}
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index 6d68dcfa2da2..c457eaa60239 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -184,7 +184,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 16,
@@ -251,7 +251,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 	{
 		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -322,21 +322,50 @@ static struct platform_device bfin_spi0_device = {
 #endif  /* spi master and devices */
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
 	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
+		.start = BFIN_UART_THR,
+		.end = BFIN_UART_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX + 1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
 };
 
-static struct platform_device bfin_uart_device = {
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
 	.name = "bfin-uart",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart_resources),
-	.resource = bfin_uart_resources,
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
@@ -368,16 +397,75 @@ static struct platform_device bfin_sir0_device = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
 static struct platform_device bfin_sport0_uart_device = {
 	.name = "bfin-sport-uart",
 	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
 };
 
 static struct platform_device bfin_sport1_uart_device = {
 	.name = "bfin-sport-uart",
 	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/input.h>
@@ -474,6 +562,30 @@ static struct platform_device bfin_dpmc = {
 	},
 };
 
+#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+static struct platform_device bfin_i2s = {
+	.name = "bfin-i2s",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	/* TODO: add platform data here */
+};
+#endif
+
+#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
+static struct platform_device bfin_tdm = {
+	.name = "bfin-tdm",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	/* TODO: add platform data here */
+};
+#endif
+
+#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+static struct platform_device bfin_ac97 = {
+	.name = "bfin-ac97",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	/* TODO: add platform data here */
+};
+#endif
+
 static struct platform_device *stamp_devices[] __initdata = {
 
 	&bfin_dpmc,
@@ -495,7 +607,9 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-	&bfin_uart_device,
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
@@ -505,9 +619,13 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
 	&bfin_sport1_uart_device,
 #endif
+#endif
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 	&bfin_device_gpiokeys,
@@ -520,6 +638,18 @@ static struct platform_device *stamp_devices[] __initdata = {
 #if defined(CONFIG_MTD_BFIN_ASYNC) || defined(CONFIG_MTD_BFIN_ASYNC_MODULE)
 	&stamp_flash_device,
 #endif
+
+#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+	&bfin_i2s,
+#endif
+
+#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
+	&bfin_tdm,
+#endif
+
+#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+	&bfin_ac97,
+#endif
 };
 
 static int __init stamp_init(void)
@@ -548,6 +678,30 @@ static int __init stamp_init(void)
 
 arch_initcall(stamp_init);
 
+static struct platform_device *stamp_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(stamp_early_devices,
+		ARRAY_SIZE(stamp_early_devices));
+}
+
 void native_machine_restart(char *cmd)
 {
 	/* workaround pull up on cpld / flash pin not being strong enough */
diff --git a/arch/blackfin/mach-bf533/include/mach/irq.h b/arch/blackfin/mach-bf533/include/mach/irq.h
index c31498be0bbb..1f7e9765d954 100644
--- a/arch/blackfin/mach-bf533/include/mach/irq.h
+++ b/arch/blackfin/mach-bf533/include/mach/irq.h
@@ -104,7 +104,8 @@ Core        Emulation               **
 
 #define GPIO_IRQ_BASE		IRQ_PF0
 
-#define	NR_IRQS		(IRQ_PF15+1)
+#define NR_MACH_IRQS		(IRQ_PF15 + 1)
+#define NR_IRQS			(NR_MACH_IRQS + NR_SPARE_IRQS)
 
 #define IVG7			7
 #define IVG8			8
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537e.c b/arch/blackfin/mach-bf537/boards/cm_bf537e.c
index c85f4d770535..d35fc5fe4c2b 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537e.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537e.c
@@ -73,7 +73,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 16,
@@ -112,7 +112,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 	{
 		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -329,8 +329,8 @@ static struct platform_device cm_flash_device = {
 #ifdef CONFIG_SERIAL_BFIN_UART0
 static struct resource bfin_uart0_resources[] = {
 	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
+		.start = UART0_THR,
+		.end = UART0_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
 	{
@@ -373,18 +373,25 @@ static struct resource bfin_uart0_resources[] = {
 #endif
 };
 
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
 static struct platform_device bfin_uart0_device = {
 	.name = "bfin-uart",
 	.id = 0,
 	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
 	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
 };
 #endif
 #ifdef CONFIG_SERIAL_BFIN_UART1
 static struct resource bfin_uart1_resources[] = {
 	{
-		.start = 0xFFC02000,
-		.end = 0xFFC020FF,
+		.start = UART1_THR,
+		.end = UART1_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
 	{
@@ -427,11 +434,18 @@ static struct resource bfin_uart1_resources[] = {
 #endif
 };
 
+unsigned short bfin_uart1_peripherals[] = {
+	P_UART1_TX, P_UART1_RX, 0
+};
+
 static struct platform_device bfin_uart1_device = {
 	.name = "bfin-uart",
 	.id = 1,
 	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
 	.resource = bfin_uart1_resources,
+	.dev = {
+		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+	},
 };
 #endif
 #endif
@@ -512,16 +526,75 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
 static struct platform_device bfin_sport0_uart_device = {
 	.name = "bfin-sport-uart",
 	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
 };
 
 static struct platform_device bfin_sport1_uart_device = {
 	.name = "bfin-sport-uart",
 	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 static struct platform_device bfin_mii_bus = {
@@ -633,9 +706,13 @@ static struct platform_device *cm_bf537e_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
 	&bfin_sport1_uart_device,
 #endif
+#endif
 
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 	&isp1362_hcd_device,
@@ -683,6 +760,33 @@ static int __init cm_bf537e_init(void)
 
 arch_initcall(cm_bf537e_init);
 
+static struct platform_device *cm_bf537e_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(cm_bf537e_early_devices,
+		ARRAY_SIZE(cm_bf537e_early_devices));
+}
+
 void bfin_get_ether_addr(char *addr)
 {
 	random_ether_addr(addr);
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537u.c b/arch/blackfin/mach-bf537/boards/cm_bf537u.c
index ea11aa81340d..d464ad5b72b2 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537u.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537u.c
@@ -74,7 +74,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 16,
@@ -113,7 +113,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 	{
 		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -327,25 +327,93 @@ static struct platform_device cm_flash_device = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
 	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
+		.start = UART0_THR,
+		.end = UART0_GCTL+2,
 		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 0xFFC02000,
-		.end = 0xFFC020FF,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
+	{
+		.start = UART1_THR,
+		.end = UART1_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_ERROR,
+		.end = IRQ_UART1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_TX,
+		.end = CH_UART1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart1_peripherals[] = {
+	P_UART1_TX, P_UART1_RX, 0
 };
 
-static struct platform_device bfin_uart_device = {
+static struct platform_device bfin_uart1_device = {
 	.name = "bfin-uart",
 	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart_resources),
-	.resource = bfin_uart_resources,
+	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
+	.resource = bfin_uart1_resources,
+	.dev = {
+		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
@@ -423,16 +491,75 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
 static struct platform_device bfin_sport0_uart_device = {
 	.name = "bfin-sport-uart",
 	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
 };
 
 static struct platform_device bfin_sport1_uart_device = {
 	.name = "bfin-sport-uart",
 	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 static struct platform_device bfin_mii_bus = {
@@ -522,7 +649,12 @@ static struct platform_device *cm_bf537u_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-	&bfin_uart_device,
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
@@ -539,9 +671,13 @@ static struct platform_device *cm_bf537u_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
 	&bfin_sport1_uart_device,
 #endif
+#endif
 
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 	&isp1362_hcd_device,
@@ -589,6 +725,33 @@ static int __init cm_bf537u_init(void)
 
 arch_initcall(cm_bf537u_init);
 
+static struct platform_device *cm_bf537u_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(cm_bf537u_early_devices,
+		ARRAY_SIZE(cm_bf537u_early_devices));
+}
+
 void bfin_get_ether_addr(char *addr)
 {
 	random_ether_addr(addr);
diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c
index 0da927252701..c489d602c590 100644
--- a/arch/blackfin/mach-bf537/boards/minotaur.c
+++ b/arch/blackfin/mach-bf537/boards/minotaur.c
@@ -211,25 +211,93 @@ static struct platform_device bfin_spi0_device = {
 #endif  /* spi master and devices */
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
 	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
+		.start = UART0_THR,
+		.end = UART0_GCTL+2,
 		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 0xFFC02000,
-		.end = 0xFFC020FF,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
+	{
+		.start = UART1_THR,
+		.end = UART1_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_ERROR,
+		.end = IRQ_UART1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_TX,
+		.end = CH_UART1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart1_peripherals[] = {
+	P_UART1_TX, P_UART1_RX, 0
 };
 
-static struct platform_device bfin_uart_device = {
+static struct platform_device bfin_uart1_device = {
 	.name = "bfin-uart",
 	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart_resources),
-	.resource = bfin_uart_resources,
+	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
+	.resource = bfin_uart1_resources,
+	.dev = {
+		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
@@ -309,16 +377,75 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
 static struct platform_device bfin_sport0_uart_device = {
 	.name = "bfin-sport-uart",
 	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
 };
 
 static struct platform_device bfin_sport1_uart_device = {
 	.name = "bfin-sport-uart",
 	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 static struct platform_device *minotaur_devices[] __initdata = {
 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
@@ -343,7 +470,12 @@ static struct platform_device *minotaur_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-	&bfin_uart_device,
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
@@ -360,9 +492,13 @@ static struct platform_device *minotaur_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
 	&bfin_sport1_uart_device,
 #endif
+#endif
 
 };
 
@@ -380,6 +516,33 @@ static int __init minotaur_init(void)
 
 arch_initcall(minotaur_init);
 
+static struct platform_device *minotaur_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(minotaur_early_devices,
+		ARRAY_SIZE(minotaur_early_devices));
+}
+
 void native_machine_restart(char *cmd)
 {
 	/* workaround reboot hang when booting from SPI */
diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c
index 4e0afda472ab..812e8f991601 100644
--- a/arch/blackfin/mach-bf537/boards/pnav10.c
+++ b/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -17,7 +17,6 @@
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/portmux.h>
-#include <linux/usb/sl811.h>
 
 #include <linux/spi/ad7877.h>
 
@@ -99,51 +98,6 @@ static struct platform_device smc91x_device = {
 };
 #endif
 
-#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
-static struct resource sl811_hcd_resources[] = {
-	{
-		.start = 0x20340000,
-		.end = 0x20340000,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 0x20340004,
-		.end = 0x20340004,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = CONFIG_USB_SL811_BFIN_IRQ,
-		.end = CONFIG_USB_SL811_BFIN_IRQ,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-};
-
-#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
-void sl811_port_power(struct device *dev, int is_on)
-{
-	gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
-	gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on);
-
-}
-#endif
-
-static struct sl811_platform_data sl811_priv = {
-	.potpg = 10,
-	.power = 250,       /* == 500mA */
-#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
-	.port_power = &sl811_port_power,
-#endif
-};
-
-static struct platform_device sl811_hcd_device = {
-	.name = "sl811-hcd",
-	.id = 0,
-	.dev = {
-		.platform_data = &sl811_priv,
-	},
-	.num_resources = ARRAY_SIZE(sl811_hcd_resources),
-	.resource = sl811_hcd_resources,
-};
-#endif
-
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 static struct platform_device bfin_mii_bus = {
 	.name = "bfin_mii_bus",
@@ -221,8 +175,8 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) \
-	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) \
+	|| defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 16,
@@ -284,8 +238,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) \
-	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) \
+	|| defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 	{
 		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -362,25 +316,93 @@ static struct platform_device bfin_fb_device = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
 	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
+		.start = UART0_THR,
+		.end = UART0_GCTL+2,
 		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 0xFFC02000,
-		.end = 0xFFC020FF,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
+	{
+		.start = UART1_THR,
+		.end = UART1_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_ERROR,
+		.end = IRQ_UART1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_TX,
+		.end = CH_UART1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart1_peripherals[] = {
+	P_UART1_TX, P_UART1_RX, 0
 };
 
-static struct platform_device bfin_uart_device = {
+static struct platform_device bfin_uart1_device = {
 	.name = "bfin-uart",
 	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart_resources),
-	.resource = bfin_uart_resources,
+	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
+	.resource = bfin_uart1_resources,
+	.dev = {
+		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
@@ -446,10 +468,6 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&rtc_device,
 #endif
 
-#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
-	&sl811_hcd_device,
-#endif
-
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
 	&smc91x_device,
 #endif
@@ -472,7 +490,12 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-	&bfin_uart_device,
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
@@ -498,6 +521,24 @@ static int __init pnav_init(void)
 
 arch_initcall(pnav_init);
 
+static struct platform_device *stamp_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(stamp_early_devices,
+		ARRAY_SIZE(stamp_early_devices));
+}
+
 void bfin_get_ether_addr(char *addr)
 {
 	random_ether_addr(addr);
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index ac9b52e0087c..9eaf5b05c11e 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -20,10 +20,12 @@
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb/isp1362.h>
 #endif
+#include <linux/i2c.h>
+#include <linux/i2c/adp5588.h>
+#include <linux/etherdevice.h>
 #include <linux/ata_platform.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
-#include <linux/i2c.h>
 #include <linux/usb/sl811.h>
 #include <linux/spi/mmc_spi.h>
 #include <linux/leds.h>
@@ -33,6 +35,14 @@
 #include <asm/reboot.h>
 #include <asm/portmux.h>
 #include <asm/dpmc.h>
+#ifdef CONFIG_REGULATOR_ADP_SWITCH
+#include <linux/regulator/adp_switch.h>
+#endif
+#ifdef CONFIG_REGULATOR_AD5398
+#include <linux/regulator/ad5398.h>
+#endif
+#include <linux/regulator/consumer.h>
+#include <linux/regulator/userspace-consumer.h>
 
 /*
  * Name the Board for the /proc/cpuinfo
@@ -208,8 +218,8 @@ static struct resource sl811_hcd_resources[] = {
 		.end = 0x20340004,
 		.flags = IORESOURCE_MEM,
 	}, {
-		.start = CONFIG_USB_SL811_BFIN_IRQ,
-		.end = CONFIG_USB_SL811_BFIN_IRQ,
+		.start = IRQ_PF4,
+		.end = IRQ_PF4,
 		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 	},
 };
@@ -454,6 +464,9 @@ static struct physmap_flash_data stamp_flash_data = {
 	.width      = 2,
 	.parts      = stamp_partitions,
 	.nr_parts   = ARRAY_SIZE(stamp_partitions),
+#ifdef CONFIG_ROMKERNEL
+	.probe_type = "map_rom",
+#endif
 };
 
 static struct resource stamp_flash_resource = {
@@ -515,20 +528,19 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \
-	|| defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
+#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
+	|| defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 16,
 };
 #endif
 
-#if defined(CONFIG_SND_BF5XX_SOC_AD1938) \
-	|| defined(CONFIG_SND_BF5XX_SOC_AD1938_MODULE)
+#if defined(CONFIG_SND_BF5XX_SOC_AD193X) \
+	|| defined(CONFIG_SND_BF5XX_SOC_AD193X_MODULE)
 static struct bfin5xx_spi_chip ad1938_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 8,
-	.cs_gpio = GPIO_PF5,
 };
 #endif
 
@@ -644,6 +656,42 @@ static struct ad714x_platform_data ad7142_i2c_platform_data = {
 };
 #endif
 
+#if defined(CONFIG_AD2S90) || defined(CONFIG_AD2S90_MODULE)
+static struct bfin5xx_spi_chip ad2s90_spi_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_AD2S120X) || defined(CONFIG_AD2S120X_MODULE)
+unsigned short ad2s120x_platform_data[] = {
+	/* used as SAMPLE and RDVEL */
+	GPIO_PF5, GPIO_PF6, 0
+};
+
+static struct bfin5xx_spi_chip ad2s120x_spi_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_AD2S1210) || defined(CONFIG_AD2S1210_MODULE)
+unsigned short ad2s1210_platform_data[] = {
+	/* use as SAMPLE, A0, A1 */
+	GPIO_PF7, GPIO_PF8, GPIO_PF9,
+# if defined(CONFIG_AD2S1210_GPIO_INPUT) || defined(CONFIG_AD2S1210_GPIO_OUTPUT)
+	/* the RES0 and RES1 pins */
+	GPIO_PF4, GPIO_PF5,
+# endif
+	0,
+};
+
+static struct bfin5xx_spi_chip ad2s1210_spi_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 8,
+};
+#endif
+
 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 #define MMC_SPI_CARD_DETECT_INT IRQ_PF5
 
@@ -686,11 +734,11 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = {
 	.y_plate_ohms		= 486,
 	.pressure_max		= 1000,
 	.pressure_min		= 0,
-	.stopacq_polarity 	= 1,
-	.first_conversion_delay = 3,
-	.acquisition_time 	= 1,
-	.averaging 		= 1,
-	.pen_down_acc_interval 	= 1,
+	.stopacq_polarity	= 1,
+	.first_conversion_delay	= 3,
+	.acquisition_time	= 1,
+	.averaging		= 1,
+	.pen_down_acc_interval	= 1,
 };
 #endif
 
@@ -701,13 +749,13 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = {
 	.x_plate_ohms		= 620,	/* 620 Ohm from the touch datasheet */
 	.pressure_max		= 10000,
 	.pressure_min		= 0,
-	.first_conversion_delay = 3,	/* wait 512us before do a first conversion */
-	.acquisition_time 	= 1,	/* 4us acquisition time per sample */
+	.first_conversion_delay	= 3,	/* wait 512us before do a first conversion */
+	.acquisition_time	= 1,	/* 4us acquisition time per sample */
 	.median			= 2,	/* do 8 measurements */
-	.averaging 		= 1,	/* take the average of 4 middle samples */
-	.pen_down_acc_interval 	= 255,	/* 9.4 ms */
-	.gpio_output		= 1,	/* configure AUX/VBAT/GPIO as GPIO output */
-	.gpio_default 		= 1,	/* During initialization set GPIO = HIGH */
+	.averaging		= 1,	/* take the average of 4 middle samples */
+	.pen_down_acc_interval	= 255,	/* 9.4 ms */
+	.gpio_export		= 1,	/* Export GPIO to gpiolib */
+	.gpio_base		= -1,	/* Dynamic allocation */
 };
 #endif
 
@@ -742,6 +790,11 @@ static const struct adxl34x_platform_data adxl34x_info = {
 /*	.ev_code_act_inactivity = KEY_A,*/	/* EV_KEY */
 	.power_mode = ADXL_AUTO_SLEEP | ADXL_LINK,
 	.fifo_mode = ADXL_FIFO_STREAM,
+	.orientation_enable = ADXL_EN_ORIENTATION_3D,
+	.deadzone_angle = ADXL_DEADZONE_ANGLE_10p8,
+	.divisor_length =  ADXL_LP_FILTER_DIVISOR_16,
+	/* EV_KEY {+Z, +Y, +X, -X, -Y, -Z} */
+	.ev_codes_orient_3d = {BTN_Z, BTN_Y, BTN_X, BTN_A, BTN_B, BTN_C},
 };
 #endif
 
@@ -813,6 +866,35 @@ static struct adf702x_platform_data adf7021_platform_data = {
 	.adf702x_regs = adf7021_regs,
 	.tx_reg = TXREG,
 };
+static inline void adf702x_mac_init(void)
+{
+	random_ether_addr(adf7021_platform_data.mac_addr);
+}
+#else
+static inline void adf702x_mac_init(void) {}
+#endif
+
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+#include <linux/spi/ads7846.h>
+static struct bfin5xx_spi_chip ad7873_spi_chip_info = {
+	.bits_per_word	= 8,
+};
+
+static int ads7873_get_pendown_state(void)
+{
+	return gpio_get_value(GPIO_PF6);
+}
+
+static struct ads7846_platform_data __initdata ad7873_pdata = {
+	.model		= 7873,		/* AD7873 */
+	.x_max		= 0xfff,
+	.y_max		= 0xfff,
+	.x_plate_ohms	= 620,
+	.debounce_max	= 1,
+	.debounce_rep	= 0,
+	.debounce_tol	= (~0),
+	.get_pendown_state = ads7873_get_pendown_state,
+};
 #endif
 
 #if defined(CONFIG_MTD_DATAFLASH) \
@@ -893,24 +975,25 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \
-	|| defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
+#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
+	|| defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
 	{
-		.modalias = "ad1836",
+		.modalias = "ad183x",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
 		.chip_select = 4,/* CONFIG_SND_BLACKFIN_SPI_PFBIT */
+		.platform_data = "ad1836", /* only includes chip name for the moment */
 		.controller_data = &ad1836_spi_chip_info,
 		.mode = SPI_MODE_3,
 	},
 #endif
 
-#if defined(CONFIG_SND_BF5XX_SOC_AD1938) || defined(CONFIG_SND_BF5XX_SOC_AD1938_MODULE)
+#if defined(CONFIG_SND_BF5XX_SOC_AD193X) || defined(CONFIG_SND_BF5XX_SOC_AD193X_MODULE)
 	{
-		.modalias = "ad1938",
+		.modalias = "ad193x",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = 0,/* CONFIG_SND_BLACKFIN_SPI_PFBIT */
+		.chip_select = 5,
 		.controller_data = &ad1938_spi_chip_info,
 		.mode = SPI_MODE_3,
 	},
@@ -929,6 +1012,37 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
+#if defined(CONFIG_AD2S90) || defined(CONFIG_AD2S90_MODULE)
+	{
+		.modalias = "ad2s90",
+		.bus_num = 0,
+		.chip_select = 3,            /* change it for your board */
+		.platform_data = NULL,
+		.controller_data = &ad2s90_spi_chip_info,
+	},
+#endif
+
+#if defined(CONFIG_AD2S120X) || defined(CONFIG_AD2S120X_MODULE)
+	{
+		.modalias = "ad2s120x",
+		.bus_num = 0,
+		.chip_select = 4,            /* CS, change it for your board */
+		.platform_data = ad2s120x_platform_data,
+		.controller_data = &ad2s120x_spi_chip_info,
+	},
+#endif
+
+#if defined(CONFIG_AD2S1210) || defined(CONFIG_AD2S1210_MODULE)
+	{
+		.modalias = "ad2s1210",
+		.max_speed_hz = 8192000,
+		.bus_num = 0,
+		.chip_select = 4,            /* CS, change it for your board */
+		.platform_data = ad2s1210_platform_data,
+		.controller_data = &ad2s1210_spi_chip_info,
+	},
+#endif
+
 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
 		.modalias = "mmc_spi",
@@ -1016,7 +1130,18 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_0,
 	},
 #endif
-
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+	{
+		.modalias = "ads7846",
+		.max_speed_hz = 2000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.irq = IRQ_PF6,
+		.chip_select = GPIO_PF10 + MAX_CTRL_CS,	/* GPIO controlled SSEL */
+		.controller_data = &ad7873_spi_chip_info,
+		.platform_data = &ad7873_pdata,
+		.mode = SPI_MODE_0,
+	},
+#endif
 };
 
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
@@ -1132,9 +1257,10 @@ static struct platform_device bfin_fb_device = {
 #include <asm/bfin-lq035q1.h>
 
 static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
-	.mode = 	LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
-	.use_bl = 	0,	/* let something else control the LCD Blacklight */
-	.gpio_bl =	GPIO_PF7,
+	.mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
+	.ppi_mode = USE_RGB565_16_BIT_PPI,
+	.use_bl = 0,	/* let something else control the LCD Blacklight */
+	.gpio_bl = GPIO_PF7,
 };
 
 static struct resource bfin_lq035q1_resources[] = {
@@ -1148,8 +1274,8 @@ static struct resource bfin_lq035q1_resources[] = {
 static struct platform_device bfin_lq035q1_device = {
 	.name		= "bfin-lq035q1",
 	.id		= -1,
-	.num_resources 	= ARRAY_SIZE(bfin_lq035q1_resources),
-	.resource 	= bfin_lq035q1_resources,
+	.num_resources	= ARRAY_SIZE(bfin_lq035q1_resources),
+	.resource	= bfin_lq035q1_resources,
 	.dev		= {
 		.platform_data = &bfin_lq035q1_data,
 	},
@@ -1157,30 +1283,105 @@ static struct platform_device bfin_lq035q1_device = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
 #ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
 	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
+		.start = UART0_THR,
+		.end = UART0_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+#ifdef CONFIG_BFIN_UART0_CTSRTS
+	{	/* CTS pin */
+		.start = GPIO_PG7,
+		.end = GPIO_PG7,
+		.flags = IORESOURCE_IO,
+	},
+	{	/* RTS pin */
+		.start = GPIO_PG6,
+		.end = GPIO_PG6,
+		.flags = IORESOURCE_IO,
+	},
+#endif
+};
+
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
 #endif
 #ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
 	{
-		.start = 0xFFC02000,
-		.end = 0xFFC020FF,
+		.start = UART1_THR,
+		.end = UART1_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
-#endif
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_ERROR,
+		.end = IRQ_UART1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_TX,
+		.end = CH_UART1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart1_peripherals[] = {
+	P_UART1_TX, P_UART1_RX, 0
 };
 
-static struct platform_device bfin_uart_device = {
+static struct platform_device bfin_uart1_device = {
 	.name = "bfin-uart",
 	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart_resources),
-	.resource = bfin_uart_resources,
+	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
+	.resource = bfin_uart1_resources,
+	.dev = {
+		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
@@ -1260,7 +1461,6 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 #if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE)
-#include <linux/i2c/adp5588.h>
 static const unsigned short adp5588_keymap[ADP5588_KEYMAPSIZE] = {
 	[0]	 = KEY_GRAVE,
 	[1]	 = KEY_1,
@@ -1457,7 +1657,6 @@ static struct adp5520_platform_data adp5520_pdev_data = {
 #endif
 
 #if defined(CONFIG_GPIO_ADP5588) || defined(CONFIG_GPIO_ADP5588_MODULE)
-#include <linux/i2c/adp5588.h>
 static struct adp5588_gpio_platform_data adp5588_gpio_data = {
 	.gpio_start = 50,
 	.pullup_dis_mask = 0,
@@ -1516,6 +1715,101 @@ static struct adp8870_backlight_platform_data adp8870_pdata = {
 };
 #endif
 
+#if defined(CONFIG_BACKLIGHT_ADP8860) || defined(CONFIG_BACKLIGHT_ADP8860_MODULE)
+#include <linux/i2c/adp8860.h>
+static struct led_info adp8860_leds[] = {
+	{
+		.name = "adp8860-led7",
+		.default_trigger = "none",
+		.flags = ADP8860_LED_D7 | ADP8860_LED_OFFT_600ms,
+	},
+};
+
+static struct adp8860_backlight_platform_data adp8860_pdata = {
+	.bl_led_assign = ADP8860_BL_D1 | ADP8860_BL_D2 | ADP8860_BL_D3 |
+			 ADP8860_BL_D4 | ADP8860_BL_D5 | ADP8860_BL_D6,	/* 1 = Backlight 0 = Individual LED */
+
+	.bl_fade_in = ADP8860_FADE_T_1200ms,		/* Backlight Fade-In Timer */
+	.bl_fade_out = ADP8860_FADE_T_1200ms,		/* Backlight Fade-Out Timer */
+	.bl_fade_law = ADP8860_FADE_LAW_CUBIC1,		/* fade-on/fade-off transfer characteristic */
+
+	.en_ambl_sens = 1,				/* 1 = enable ambient light sensor */
+	.abml_filt = ADP8860_BL_AMBL_FILT_320ms,	/* Light sensor filter time */
+
+	.l1_daylight_max = ADP8860_BL_CUR_mA(20),	/* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	.l1_daylight_dim = ADP8860_BL_CUR_mA(0),	/* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	.l2_office_max = ADP8860_BL_CUR_mA(6),		/* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	.l2_office_dim = ADP8860_BL_CUR_mA(0),		/* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	.l3_dark_max = ADP8860_BL_CUR_mA(2),		/* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	.l3_dark_dim = ADP8860_BL_CUR_mA(0),		/* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+
+	.l2_trip = ADP8860_L2_COMP_CURR_uA(710),	/* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
+	.l2_hyst = ADP8860_L2_COMP_CURR_uA(73),		/* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
+	.l3_trip = ADP8860_L3_COMP_CURR_uA(43),		/* use L3_COMP_CURR_uA(I) 0 <= I <= 138 uA */
+	.l3_hyst = ADP8860_L3_COMP_CURR_uA(11),		/* use L3_COMP_CURR_uA(I) 0 <= I <= 138 uA */
+
+	.leds = adp8860_leds,
+	.num_leds = ARRAY_SIZE(adp8860_leds),
+	.led_fade_law = ADP8860_FADE_LAW_SQUARE,	/* fade-on/fade-off transfer characteristic */
+	.led_fade_in = ADP8860_FADE_T_600ms,
+	.led_fade_out = ADP8860_FADE_T_600ms,
+	.led_on_time = ADP8860_LED_ONT_200ms,
+};
+#endif
+
+#if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE)
+static struct regulator_consumer_supply ad5398_consumer = {
+	.supply = "current",
+};
+
+static struct regulator_init_data ad5398_regulator_data = {
+	.constraints = {
+		.name = "current range",
+		.max_uA = 120000,
+		.valid_ops_mask = REGULATOR_CHANGE_CURRENT | REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = 1,
+	.consumer_supplies     = &ad5398_consumer,
+};
+
+static struct ad5398_platform_data ad5398_i2c_platform_data = {
+	.current_bits = 10,
+	.current_offset = 4,
+	.regulator_data = &ad5398_regulator_data,
+};
+
+#if defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER) || \
+	defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER_MODULE)
+static struct platform_device ad5398_virt_consumer_device = {
+	.name = "reg-virt-consumer",
+	.id = 0,
+	.dev = {
+		.platform_data = "current", /* Passed to driver */
+	},
+};
+#endif
+#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
+	defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
+static struct regulator_bulk_data ad5398_bulk_data = {
+	.supply = "current",
+};
+
+static struct regulator_userspace_consumer_data ad5398_userspace_comsumer_data = {
+	.name = "ad5398",
+	.num_supplies = 1,
+	.supplies = &ad5398_bulk_data,
+};
+
+static struct platform_device ad5398_userspace_consumer_device = {
+	.name = "reg-userspace-consumer",
+	.id = 0,
+	.dev = {
+		.platform_data = &ad5398_userspace_comsumer_data,
+	},
+};
+#endif
+#endif
+
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 #if defined(CONFIG_INPUT_AD714X_I2C) || defined(CONFIG_INPUT_AD714X_I2C_MODULE)
 	{
@@ -1524,6 +1818,52 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 		.platform_data = (void *)&ad7142_i2c_platform_data,
 	},
 #endif
+
+#if defined(CONFIG_AD7150) || defined(CONFIG_AD7150_MODULE)
+	{
+		I2C_BOARD_INFO("ad7150", 0x48),
+		.irq = IRQ_PG5, /* fixme: use real interrupt number */
+	},
+#endif
+
+#if defined(CONFIG_AD7152) || defined(CONFIG_AD7152_MODULE)
+	{
+		I2C_BOARD_INFO("ad7152", 0x48),
+	},
+#endif
+
+#if defined(CONFIG_AD774X) || defined(CONFIG_AD774X_MODULE)
+	{
+		I2C_BOARD_INFO("ad774x", 0x48),
+	},
+#endif
+
+#if defined(CONFIG_AD7414) || defined(CONFIG_AD7414_MODULE)
+	{
+		I2C_BOARD_INFO("ad7414", 0x9),
+		.irq = IRQ_PG5,
+		/*
+		 * platform_data pointer is borrwoed by the driver to
+		 * store custimer defined IRQ ALART level mode.
+		 * only IRQF_TRIGGER_HIGH and IRQF_TRIGGER_LOW are valid.
+		 */
+		.platform_data = (void *)IRQF_TRIGGER_LOW,
+	},
+#endif
+
+#if defined(CONFIG_AD7416) || defined(CONFIG_AD7416_MODULE)
+	{
+		I2C_BOARD_INFO("ad7417", 0xb),
+		.irq = IRQ_PG5,
+		/*
+		 * platform_data pointer is borrwoed by the driver to
+		 * store custimer defined IRQ ALART level mode.
+		 * only IRQF_TRIGGER_HIGH and IRQF_TRIGGER_LOW are valid.
+		 */
+		.platform_data = (void *)IRQF_TRIGGER_LOW,
+	},
+#endif
+
 #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
@@ -1595,24 +1935,105 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 		I2C_BOARD_INFO("adau1761", 0x38),
 	},
 #endif
+#if defined(CONFIG_SND_SOC_ADAU1361) || defined(CONFIG_SND_SOC_ADAU1361_MODULE)
+	{
+		I2C_BOARD_INFO("adau1361", 0x38),
+	},
+#endif
 #if defined(CONFIG_AD525X_DPOT) || defined(CONFIG_AD525X_DPOT_MODULE)
 	{
 		I2C_BOARD_INFO("ad5258", 0x18),
 	},
 #endif
+#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE)
+	{
+		I2C_BOARD_INFO("ssm2602", 0x1b),
+	},
+#endif
+#if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE)
+	{
+		I2C_BOARD_INFO("ad5398", 0xC),
+		.platform_data = (void *)&ad5398_i2c_platform_data,
+	},
+#endif
+#if defined(CONFIG_BACKLIGHT_ADP8860) || defined(CONFIG_BACKLIGHT_ADP8860_MODULE)
+	{
+		I2C_BOARD_INFO("adp8860", 0x2A),
+		.platform_data = (void *)&adp8860_pdata,
+	},
+#endif
 };
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
 static struct platform_device bfin_sport0_uart_device = {
 	.name = "bfin-sport-uart",
 	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
 };
 
 static struct platform_device bfin_sport1_uart_device = {
 	.name = "bfin-sport-uart",
 	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
 #define CF_IDE_NAND_CARD_USE_HDD_INTERFACE
@@ -1701,13 +2122,121 @@ static struct platform_device bfin_dpmc = {
 	},
 };
 
+#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+static struct platform_device bfin_i2s = {
+	.name = "bfin-i2s",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	/* TODO: add platform data here */
+};
+#endif
+
 #if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
 static struct platform_device bfin_tdm = {
 	.name = "bfin-tdm",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
 	/* TODO: add platform data here */
 };
 #endif
 
+#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+static struct platform_device bfin_ac97 = {
+	.name = "bfin-ac97",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	/* TODO: add platform data here */
+};
+#endif
+
+#if defined(CONFIG_REGULATOR_ADP_SWITCH) || defined(CONFIG_REGULATOR_ADP_SWITCH_MODULE)
+#define REGULATOR_ADP122        "adp122"
+#define REGULATOR_ADP150        "adp150"
+
+static struct regulator_consumer_supply adp122_consumers = {
+		.supply = REGULATOR_ADP122,
+};
+
+static struct regulator_consumer_supply adp150_consumers = {
+		.supply = REGULATOR_ADP150,
+};
+
+static struct regulator_init_data adp_switch_regulator_data[] = {
+	{
+		.constraints = {
+			.name = REGULATOR_ADP122,
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+			.min_uA = 0,
+			.max_uA = 300000,
+		},
+		.num_consumer_supplies = 1,	/* only 1 */
+		.consumer_supplies     = &adp122_consumers,
+		.driver_data	       = (void *)GPIO_PF2, /* gpio port only */
+	},
+	{
+		.constraints = {
+			.name = REGULATOR_ADP150,
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+			.min_uA = 0,
+			.max_uA = 150000,
+		},
+		.num_consumer_supplies = 1,	/* only 1 */
+		.consumer_supplies     = &adp150_consumers,
+		.driver_data	       = (void *)GPIO_PF3, /* gpio port only */
+	},
+};
+
+static struct adp_switch_platform_data adp_switch_pdata = {
+	.regulator_num = ARRAY_SIZE(adp_switch_regulator_data),
+	.regulator_data = adp_switch_regulator_data,
+};
+
+static struct platform_device adp_switch_device = {
+	.name = "adp_switch",
+	.id = 0,
+	.dev = {
+		.platform_data = &adp_switch_pdata,
+	},
+};
+
+#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
+	defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
+static struct regulator_bulk_data adp122_bulk_data = {
+	.supply = REGULATOR_ADP122,
+};
+
+static struct regulator_userspace_consumer_data adp122_userspace_comsumer_data = {
+	.name = REGULATOR_ADP122,
+	.num_supplies = 1,
+	.supplies = &adp122_bulk_data,
+};
+
+static struct platform_device adp122_userspace_consumer_device = {
+	.name = "reg-userspace-consumer",
+	.id = 0,
+	.dev = {
+		.platform_data = &adp122_userspace_comsumer_data,
+	},
+};
+
+static struct regulator_bulk_data adp150_bulk_data = {
+	.supply = REGULATOR_ADP150,
+};
+
+static struct regulator_userspace_consumer_data adp150_userspace_comsumer_data = {
+	.name = REGULATOR_ADP150,
+	.num_supplies = 1,
+	.supplies = &adp150_bulk_data,
+};
+
+static struct platform_device adp150_userspace_consumer_device = {
+	.name = "reg-userspace-consumer",
+	.id = 1,
+	.dev = {
+		.platform_data = &adp150_userspace_comsumer_data,
+	},
+};
+#endif
+#endif
+
+
 static struct platform_device *stamp_devices[] __initdata = {
 
 	&bfin_dpmc,
@@ -1771,7 +2300,12 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-	&bfin_uart_device,
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
@@ -1788,9 +2322,13 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
 	&bfin_sport1_uart_device,
 #endif
+#endif
 
 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
 	&bfin_pata_device,
@@ -1808,18 +2346,46 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&stamp_flash_device,
 #endif
 
+#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+	&bfin_i2s,
+#endif
+
 #if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
 	&bfin_tdm,
 #endif
+
+#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+	&bfin_ac97,
+#endif
+#if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE)
+#if defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER) || \
+	defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER_MODULE)
+	&ad5398_virt_consumer_device,
+#endif
+#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
+	defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
+	&ad5398_userspace_consumer_device,
+#endif
+#endif
+
+#if defined(CONFIG_REGULATOR_ADP_SWITCH) || defined(CONFIG_REGULATOR_ADP_SWITCH_MODULE)
+	&adp_switch_device,
+#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
+	defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
+	&adp122_userspace_consumer_device,
+	&adp150_userspace_consumer_device,
+#endif
+#endif
 };
 
 static int __init stamp_init(void)
 {
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
-	i2c_register_board_info(0, bfin_i2c_board_info,
-				ARRAY_SIZE(bfin_i2c_board_info));
 	bfin_plat_nand_init();
+	adf702x_mac_init();
 	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+	i2c_register_board_info(0, bfin_i2c_board_info,
+				ARRAY_SIZE(bfin_i2c_board_info));
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 
 	return 0;
@@ -1827,6 +2393,34 @@ static int __init stamp_init(void)
 
 arch_initcall(stamp_init);
 
+
+static struct platform_device *stamp_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(stamp_early_devices,
+		ARRAY_SIZE(stamp_early_devices));
+}
+
 void native_machine_restart(char *cmd)
 {
 	/* workaround reboot hang when booting from SPI */
diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
index 57163b65a4f5..4f0a2e72ce4c 100644
--- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
@@ -74,7 +74,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 16,
@@ -113,7 +113,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 	{
 		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -327,25 +327,93 @@ static struct platform_device cm_flash_device = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
 	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
+		.start = UART0_THR,
+		.end = UART0_GCTL+2,
 		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 0xFFC02000,
-		.end = 0xFFC020FF,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
+	{
+		.start = UART1_THR,
+		.end = UART1_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_ERROR,
+		.end = IRQ_UART1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_TX,
+		.end = CH_UART1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart1_peripherals[] = {
+	P_UART1_TX, P_UART1_RX, 0
 };
 
-static struct platform_device bfin_uart_device = {
+static struct platform_device bfin_uart1_device = {
 	.name = "bfin-uart",
 	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart_resources),
-	.resource = bfin_uart_resources,
+	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
+	.resource = bfin_uart1_resources,
+	.dev = {
+		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
@@ -425,16 +493,75 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
 static struct platform_device bfin_sport0_uart_device = {
 	.name = "bfin-sport-uart",
 	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
 };
 
 static struct platform_device bfin_sport1_uart_device = {
 	.name = "bfin-sport-uart",
 	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 static struct platform_device bfin_mii_bus = {
@@ -524,7 +651,12 @@ static struct platform_device *cm_bf537_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-	&bfin_uart_device,
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
@@ -541,9 +673,13 @@ static struct platform_device *cm_bf537_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
 	&bfin_sport1_uart_device,
 #endif
+#endif
 
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 	&isp1362_hcd_device,
@@ -591,6 +727,33 @@ static int __init tcm_bf537_init(void)
 
 arch_initcall(tcm_bf537_init);
 
+static struct platform_device *cm_bf537_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(cm_bf537_early_devices,
+		ARRAY_SIZE(cm_bf537_early_devices));
+}
+
 void bfin_get_ether_addr(char *addr)
 {
 	random_ether_addr(addr);
diff --git a/arch/blackfin/mach-bf537/include/mach/irq.h b/arch/blackfin/mach-bf537/include/mach/irq.h
index 0defa9457e7f..789a4f226f7b 100644
--- a/arch/blackfin/mach-bf537/include/mach/irq.h
+++ b/arch/blackfin/mach-bf537/include/mach/irq.h
@@ -134,7 +134,17 @@
 
 #define GPIO_IRQ_BASE	IRQ_PF0
 
-#define NR_IRQS     (IRQ_PH15+1)
+#define IRQ_MAC_PHYINT		98 /* PHY_INT Interrupt */
+#define IRQ_MAC_MMCINT		99 /* MMC Counter Interrupt */
+#define IRQ_MAC_RXFSINT		100 /* RX Frame-Status Interrupt */
+#define IRQ_MAC_TXFSINT		101 /* TX Frame-Status Interrupt */
+#define IRQ_MAC_WAKEDET		102 /* Wake-Up Interrupt */
+#define IRQ_MAC_RXDMAERR	103 /* RX DMA Direction Error Interrupt */
+#define IRQ_MAC_TXDMAERR	104 /* TX DMA Direction Error Interrupt */
+#define IRQ_MAC_STMDONE		105 /* Station Mgt. Transfer Done Interrupt */
+
+#define NR_MACH_IRQS	(IRQ_MAC_STMDONE + 1)
+#define NR_IRQS		(NR_MACH_IRQS + NR_SPARE_IRQS)
 
 #define IVG7            7
 #define IVG8            8
diff --git a/arch/blackfin/mach-bf538/boards/ezkit.c b/arch/blackfin/mach-bf538/boards/ezkit.c
index c296bb1ed503..1a1f65855b03 100644
--- a/arch/blackfin/mach-bf538/boards/ezkit.c
+++ b/arch/blackfin/mach-bf538/boards/ezkit.c
@@ -41,37 +41,148 @@ static struct platform_device rtc_device = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
 #ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
 	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
+		.start = UART0_THR,
+		.end = UART0_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+#ifdef CONFIG_BFIN_UART0_CTSRTS
+	{	/* CTS pin */
+		.start = GPIO_PG7,
+		.end = GPIO_PG7,
+		.flags = IORESOURCE_IO,
+	},
+	{	/* RTS pin */
+		.start = GPIO_PG6,
+		.end = GPIO_PG6,
+		.flags = IORESOURCE_IO,
+	},
+#endif
+};
+
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
 #endif
 #ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
 	{
-		.start = 0xFFC02000,
-		.end = 0xFFC020FF,
+		.start = UART1_THR,
+		.end = UART1_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_ERROR,
+		.end = IRQ_UART1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_TX,
+		.end = CH_UART1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart1_peripherals[] = {
+	P_UART1_TX, P_UART1_RX, 0
+};
+
+static struct platform_device bfin_uart1_device = {
+	.name = "bfin-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
+	.resource = bfin_uart1_resources,
+	.dev = {
+		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+	},
+};
 #endif
 #ifdef CONFIG_SERIAL_BFIN_UART2
+static struct resource bfin_uart2_resources[] = {
 	{
-		.start = 0xFFC02100,
-		.end = 0xFFC021FF,
+		.start = UART2_THR,
+		.end = UART2_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
-#endif
+	{
+		.start = IRQ_UART2_RX,
+		.end = IRQ_UART2_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART2_ERROR,
+		.end = IRQ_UART2_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART2_TX,
+		.end = CH_UART2_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART2_RX,
+		.end = CH_UART2_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart2_peripherals[] = {
+	P_UART2_TX, P_UART2_RX, 0
 };
 
-static struct platform_device bfin_uart_device = {
+static struct platform_device bfin_uart2_device = {
 	.name = "bfin-uart",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart_resources),
-	.resource = bfin_uart_resources,
+	.id = 2,
+	.num_resources = ARRAY_SIZE(bfin_uart2_resources),
+	.resource = bfin_uart2_resources,
+	.dev = {
+		.platform_data = &bfin_uart2_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
@@ -151,6 +262,145 @@ static struct platform_device bfin_sir2_device = {
 #endif
 #endif
 
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
+static struct platform_device bfin_sport0_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
+static struct resource bfin_sport2_uart_resources[] = {
+	{
+		.start = SPORT2_TCR1,
+		.end = SPORT2_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT2_RX,
+		.end = IRQ_SPORT2_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT2_ERROR,
+		.end = IRQ_SPORT2_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport2_peripherals[] = {
+	P_SPORT2_TFS, P_SPORT2_DTPRI, P_SPORT2_TSCLK, P_SPORT2_RFS,
+	P_SPORT2_DRPRI, P_SPORT2_RSCLK, P_SPORT2_DRSEC, P_SPORT2_DTSEC, 0
+};
+
+static struct platform_device bfin_sport2_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(bfin_sport2_uart_resources),
+	.resource = bfin_sport2_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport2_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
+static struct resource bfin_sport3_uart_resources[] = {
+	{
+		.start = SPORT3_TCR1,
+		.end = SPORT3_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT3_RX,
+		.end = IRQ_SPORT3_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT3_ERROR,
+		.end = IRQ_SPORT3_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport3_peripherals[] = {
+	P_SPORT3_TFS, P_SPORT3_DTPRI, P_SPORT3_TSCLK, P_SPORT3_RFS,
+	P_SPORT3_DRPRI, P_SPORT3_RSCLK, P_SPORT3_DRSEC, P_SPORT3_DTSEC, 0
+};
+
+static struct platform_device bfin_sport3_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 3,
+	.num_resources = ARRAY_SIZE(bfin_sport3_uart_resources),
+	.resource = bfin_sport3_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport3_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
 #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
 unsigned short bfin_can_peripherals[] = {
 	P_CAN0_RX, P_CAN0_TX, 0
@@ -268,8 +518,8 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = {
 	.median			= 2,	/* do 8 measurements */
 	.averaging 		= 1,	/* take the average of 4 middle samples */
 	.pen_down_acc_interval 	= 255,	/* 9.4 ms */
-	.gpio_output		= 1,	/* configure AUX/VBAT/GPIO as GPIO output */
-	.gpio_default 		= 1,	/* During initialization set GPIO = HIGH */
+	.gpio_export		= 1,	/* Export GPIO to gpiolib */
+	.gpio_base		= -1,	/* Dynamic allocation */
 };
 #endif
 
@@ -284,9 +534,10 @@ static struct bfin5xx_spi_chip spi_ad7879_chip_info = {
 #include <asm/bfin-lq035q1.h>
 
 static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
-	.mode = 	LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
-	.use_bl = 	0,	/* let something else control the LCD Blacklight */
-	.gpio_bl =	GPIO_PF7,
+	.mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
+	.ppi_mode = USE_RGB565_16_BIT_PPI,
+	.use_bl = 0,	/* let something else control the LCD Blacklight */
+	.gpio_bl = GPIO_PF7,
 };
 
 static struct resource bfin_lq035q1_resources[] = {
@@ -622,7 +873,15 @@ static struct platform_device *cm_bf538_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-	&bfin_uart_device,
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART2
+	&bfin_uart2_device,
+#endif
 #endif
 
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
@@ -648,6 +907,21 @@ static struct platform_device *cm_bf538_devices[] __initdata = {
 #endif
 #endif
 
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
+	&bfin_sport2_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
+	&bfin_sport3_uart_device,
+#endif
+#endif
+
 #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
 	&bfin_can_device,
 #endif
@@ -683,3 +957,39 @@ static int __init ezkit_init(void)
 }
 
 arch_initcall(ezkit_init);
+
+static struct platform_device *ezkit_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART2
+	&bfin_uart2_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
+	&bfin_sport2_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
+	&bfin_sport3_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(ezkit_early_devices,
+		ARRAY_SIZE(ezkit_early_devices));
+}
diff --git a/arch/blackfin/mach-bf538/include/mach/irq.h b/arch/blackfin/mach-bf538/include/mach/irq.h
index a4b7fcbc556b..7a479d224dc7 100644
--- a/arch/blackfin/mach-bf538/include/mach/irq.h
+++ b/arch/blackfin/mach-bf538/include/mach/irq.h
@@ -110,7 +110,8 @@
 
 #define GPIO_IRQ_BASE	IRQ_PF0
 
-#define NR_IRQS     (IRQ_PF15+1)
+#define NR_MACH_IRQS	(IRQ_PF15 + 1)
+#define NR_IRQS		(NR_MACH_IRQS + NR_SPARE_IRQS)
 
 #define IVG7            7
 #define IVG8            8
diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c
index ccdcd6da2e9f..f60c333fec66 100644
--- a/arch/blackfin/mach-bf548/boards/cm_bf548.c
+++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c
@@ -127,44 +127,211 @@ static struct platform_device rtc_device = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
 #ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
 	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
+		.start = UART0_DLL,
+		.end = UART0_RBR+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
 #endif
 #ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
 	{
-		.start = 0xFFC02000,
-		.end = 0xFFC020FF,
+		.start = UART1_DLL,
+		.end = UART1_RBR+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_ERROR,
+		.end = IRQ_UART1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_TX,
+		.end = CH_UART1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+#ifdef CONFIG_BFIN_UART1_CTSRTS
+	{	/* CTS pin -- 0 means not supported */
+		.start = GPIO_PE10,
+		.end = GPIO_PE10,
+		.flags = IORESOURCE_IO,
+	},
+	{	/* RTS pin -- 0 means not supported */
+		.start = GPIO_PE9,
+		.end = GPIO_PE9,
+		.flags = IORESOURCE_IO,
+	},
+#endif
+};
+
+unsigned short bfin_uart1_peripherals[] = {
+	P_UART1_TX, P_UART1_RX,
+#ifdef CONFIG_BFIN_UART1_CTSRTS
+	P_UART1_RTS, P_UART1_CTS,
+#endif
+	0
+};
+
+static struct platform_device bfin_uart1_device = {
+	.name = "bfin-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
+	.resource = bfin_uart1_resources,
+	.dev = {
+		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+	},
+};
 #endif
 #ifdef CONFIG_SERIAL_BFIN_UART2
+static struct resource bfin_uart2_resources[] = {
 	{
-		.start = 0xFFC02100,
-		.end = 0xFFC021FF,
+		.start = UART2_DLL,
+		.end = UART2_RBR+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART2_RX,
+		.end = IRQ_UART2_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART2_ERROR,
+		.end = IRQ_UART2_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART2_TX,
+		.end = CH_UART2_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART2_RX,
+		.end = CH_UART2_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart2_peripherals[] = {
+	P_UART2_TX, P_UART2_RX, 0
+};
+
+static struct platform_device bfin_uart2_device = {
+	.name = "bfin-uart",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(bfin_uart2_resources),
+	.resource = bfin_uart2_resources,
+	.dev = {
+		.platform_data = &bfin_uart2_peripherals, /* Passed to driver */
+	},
+};
 #endif
 #ifdef CONFIG_SERIAL_BFIN_UART3
+static struct resource bfin_uart3_resources[] = {
 	{
-		.start = 0xFFC03100,
-		.end = 0xFFC031FF,
+		.start = UART3_DLL,
+		.end = UART3_RBR+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART3_RX,
+		.end = IRQ_UART3_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART3_ERROR,
+		.end = IRQ_UART3_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART3_TX,
+		.end = CH_UART3_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART3_RX,
+		.end = CH_UART3_RX,
+		.flags = IORESOURCE_DMA,
+	},
+#ifdef CONFIG_BFIN_UART3_CTSRTS
+	{	/* CTS pin -- 0 means not supported */
+		.start = GPIO_PB3,
+		.end = GPIO_PB3,
+		.flags = IORESOURCE_IO,
+	},
+	{	/* RTS pin -- 0 means not supported */
+		.start = GPIO_PB2,
+		.end = GPIO_PB2,
+		.flags = IORESOURCE_IO,
+	},
 #endif
 };
 
-static struct platform_device bfin_uart_device = {
+unsigned short bfin_uart3_peripherals[] = {
+	P_UART3_TX, P_UART3_RX,
+#ifdef CONFIG_BFIN_UART3_CTSRTS
+	P_UART3_RTS, P_UART3_CTS,
+#endif
+	0
+};
+
+static struct platform_device bfin_uart3_device = {
 	.name = "bfin-uart",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart_resources),
-	.resource = bfin_uart_resources,
+	.id = 3,
+	.num_resources = ARRAY_SIZE(bfin_uart3_resources),
+	.resource = bfin_uart3_resources,
+	.dev = {
+		.platform_data = &bfin_uart3_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
@@ -359,6 +526,145 @@ static struct platform_device musb_device = {
 };
 #endif
 
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
+static struct platform_device bfin_sport0_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
+static struct resource bfin_sport2_uart_resources[] = {
+	{
+		.start = SPORT2_TCR1,
+		.end = SPORT2_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT2_RX,
+		.end = IRQ_SPORT2_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT2_ERROR,
+		.end = IRQ_SPORT2_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport2_peripherals[] = {
+	P_SPORT2_TFS, P_SPORT2_DTPRI, P_SPORT2_TSCLK, P_SPORT2_RFS,
+	P_SPORT2_DRPRI, P_SPORT2_RSCLK, P_SPORT2_DRSEC, P_SPORT2_DTSEC, 0
+};
+
+static struct platform_device bfin_sport2_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(bfin_sport2_uart_resources),
+	.resource = bfin_sport2_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport2_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
+static struct resource bfin_sport3_uart_resources[] = {
+	{
+		.start = SPORT3_TCR1,
+		.end = SPORT3_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT3_RX,
+		.end = IRQ_SPORT3_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT3_ERROR,
+		.end = IRQ_SPORT3_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport3_peripherals[] = {
+	P_SPORT3_TFS, P_SPORT3_DTPRI, P_SPORT3_TSCLK, P_SPORT3_RFS,
+	P_SPORT3_DRPRI, P_SPORT3_RSCLK, P_SPORT3_DRSEC, P_SPORT3_DTSEC, 0
+};
+
+static struct platform_device bfin_sport3_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 3,
+	.num_resources = ARRAY_SIZE(bfin_sport3_uart_resources),
+	.resource = bfin_sport3_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport3_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
 #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
 static struct resource bfin_atapi_resources[] = {
 	{
@@ -752,7 +1058,18 @@ static struct platform_device *cm_bf548_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-	&bfin_uart_device,
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART2
+	&bfin_uart2_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART3
+	&bfin_uart3_device,
+#endif
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
@@ -782,6 +1099,21 @@ static struct platform_device *cm_bf548_devices[] __initdata = {
 	&musb_device,
 #endif
 
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
+	&bfin_sport2_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
+	&bfin_sport3_uart_device,
+#endif
+#endif
+
 #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
 	&bfin_atapi_device,
 #endif
@@ -833,3 +1165,42 @@ static int __init cm_bf548_init(void)
 }
 
 arch_initcall(cm_bf548_init);
+
+static struct platform_device *cm_bf548_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART2
+	&bfin_uart2_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART3
+	&bfin_uart3_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
+	&bfin_sport2_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
+	&bfin_sport3_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(cm_bf548_early_devices,
+		ARRAY_SIZE(cm_bf548_early_devices));
+}
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index 60193f72777c..06919db00a74 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -232,44 +232,211 @@ static struct platform_device rtc_device = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
 #ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
 	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
+		.start = UART0_DLL,
+		.end = UART0_RBR+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
 #endif
 #ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
 	{
-		.start = 0xFFC02000,
-		.end = 0xFFC020FF,
+		.start = UART1_DLL,
+		.end = UART1_RBR+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_ERROR,
+		.end = IRQ_UART1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_TX,
+		.end = CH_UART1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+#ifdef CONFIG_BFIN_UART1_CTSRTS
+	{	/* CTS pin -- 0 means not supported */
+		.start = GPIO_PE10,
+		.end = GPIO_PE10,
+		.flags = IORESOURCE_IO,
+	},
+	{	/* RTS pin -- 0 means not supported */
+		.start = GPIO_PE9,
+		.end = GPIO_PE9,
+		.flags = IORESOURCE_IO,
+	},
+#endif
+};
+
+unsigned short bfin_uart1_peripherals[] = {
+	P_UART1_TX, P_UART1_RX,
+#ifdef CONFIG_BFIN_UART1_CTSRTS
+	P_UART1_RTS, P_UART1_CTS,
+#endif
+	0
+};
+
+static struct platform_device bfin_uart1_device = {
+	.name = "bfin-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
+	.resource = bfin_uart1_resources,
+	.dev = {
+		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+	},
+};
 #endif
 #ifdef CONFIG_SERIAL_BFIN_UART2
+static struct resource bfin_uart2_resources[] = {
 	{
-		.start = 0xFFC02100,
-		.end = 0xFFC021FF,
+		.start = UART2_DLL,
+		.end = UART2_RBR+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART2_RX,
+		.end = IRQ_UART2_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART2_ERROR,
+		.end = IRQ_UART2_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART2_TX,
+		.end = CH_UART2_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART2_RX,
+		.end = CH_UART2_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart2_peripherals[] = {
+	P_UART2_TX, P_UART2_RX, 0
+};
+
+static struct platform_device bfin_uart2_device = {
+	.name = "bfin-uart",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(bfin_uart2_resources),
+	.resource = bfin_uart2_resources,
+	.dev = {
+		.platform_data = &bfin_uart2_peripherals, /* Passed to driver */
+	},
+};
 #endif
 #ifdef CONFIG_SERIAL_BFIN_UART3
+static struct resource bfin_uart3_resources[] = {
 	{
-		.start = 0xFFC03100,
-		.end = 0xFFC031FF,
+		.start = UART3_DLL,
+		.end = UART3_RBR+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART3_RX,
+		.end = IRQ_UART3_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART3_ERROR,
+		.end = IRQ_UART3_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART3_TX,
+		.end = CH_UART3_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART3_RX,
+		.end = CH_UART3_RX,
+		.flags = IORESOURCE_DMA,
+	},
+#ifdef CONFIG_BFIN_UART3_CTSRTS
+	{	/* CTS pin -- 0 means not supported */
+		.start = GPIO_PB3,
+		.end = GPIO_PB3,
+		.flags = IORESOURCE_IO,
+	},
+	{	/* RTS pin -- 0 means not supported */
+		.start = GPIO_PB2,
+		.end = GPIO_PB2,
+		.flags = IORESOURCE_IO,
+	},
 #endif
 };
 
-static struct platform_device bfin_uart_device = {
+unsigned short bfin_uart3_peripherals[] = {
+	P_UART3_TX, P_UART3_RX,
+#ifdef CONFIG_BFIN_UART3_CTSRTS
+	P_UART3_RTS, P_UART3_CTS,
+#endif
+	0
+};
+
+static struct platform_device bfin_uart3_device = {
 	.name = "bfin-uart",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart_resources),
-	.resource = bfin_uart_resources,
+	.id = 3,
+	.num_resources = ARRAY_SIZE(bfin_uart3_resources),
+	.resource = bfin_uart3_resources,
+	.dev = {
+		.platform_data = &bfin_uart3_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
@@ -464,6 +631,145 @@ static struct platform_device musb_device = {
 };
 #endif
 
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
+static struct platform_device bfin_sport0_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
+static struct resource bfin_sport2_uart_resources[] = {
+	{
+		.start = SPORT2_TCR1,
+		.end = SPORT2_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT2_RX,
+		.end = IRQ_SPORT2_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT2_ERROR,
+		.end = IRQ_SPORT2_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport2_peripherals[] = {
+	P_SPORT2_TFS, P_SPORT2_DTPRI, P_SPORT2_TSCLK, P_SPORT2_RFS,
+	P_SPORT2_DRPRI, P_SPORT2_RSCLK, P_SPORT2_DRSEC, P_SPORT2_DTSEC, 0
+};
+
+static struct platform_device bfin_sport2_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(bfin_sport2_uart_resources),
+	.resource = bfin_sport2_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport2_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
+static struct resource bfin_sport3_uart_resources[] = {
+	{
+		.start = SPORT3_TCR1,
+		.end = SPORT3_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT3_RX,
+		.end = IRQ_SPORT3_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT3_ERROR,
+		.end = IRQ_SPORT3_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport3_peripherals[] = {
+	P_SPORT3_TFS, P_SPORT3_DTPRI, P_SPORT3_TSCLK, P_SPORT3_RFS,
+	P_SPORT3_DRPRI, P_SPORT3_RSCLK, P_SPORT3_DRSEC, P_SPORT3_DTSEC, 0
+};
+
+static struct platform_device bfin_sport3_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 3,
+	.num_resources = ARRAY_SIZE(bfin_sport3_uart_resources),
+	.resource = bfin_sport3_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport3_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
 #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
 unsigned short bfin_can_peripherals[] = {
 	P_CAN0_RX, P_CAN0_TX, 0
@@ -657,8 +963,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) \
-	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) \
+	|| defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 16,
@@ -714,8 +1020,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_3,
 	},
 #endif
-#if defined(CONFIG_SND_BLACKFIN_AD1836) \
-	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) \
+	|| defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 	{
 		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -951,6 +1257,30 @@ static struct platform_device bfin_dpmc = {
 	},
 };
 
+#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+static struct platform_device bfin_i2s = {
+	.name = "bfin-i2s",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	/* TODO: add platform data here */
+};
+#endif
+
+#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
+static struct platform_device bfin_tdm = {
+	.name = "bfin-tdm",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	/* TODO: add platform data here */
+};
+#endif
+
+#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+static struct platform_device bfin_ac97 = {
+	.name = "bfin-ac97",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	/* TODO: add platform data here */
+};
+#endif
+
 static struct platform_device *ezkit_devices[] __initdata = {
 
 	&bfin_dpmc,
@@ -960,7 +1290,18 @@ static struct platform_device *ezkit_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-	&bfin_uart_device,
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART2
+	&bfin_uart2_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART3
+	&bfin_uart3_device,
+#endif
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
@@ -994,6 +1335,21 @@ static struct platform_device *ezkit_devices[] __initdata = {
 	&bfin_isp1760_device,
 #endif
 
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
+	&bfin_sport2_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
+	&bfin_sport3_uart_device,
+#endif
+#endif
+
 #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
 	&bfin_can_device,
 #endif
@@ -1037,6 +1393,18 @@ static struct platform_device *ezkit_devices[] __initdata = {
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 	&ezkit_flash_device,
 #endif
+
+#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+	&bfin_i2s,
+#endif
+
+#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
+	&bfin_tdm,
+#endif
+
+#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+	&bfin_ac97,
+#endif
 };
 
 static int __init ezkit_init(void)
@@ -1058,3 +1426,42 @@ static int __init ezkit_init(void)
 }
 
 arch_initcall(ezkit_init);
+
+static struct platform_device *ezkit_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART2
+	&bfin_uart2_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART3
+	&bfin_uart3_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
+	&bfin_sport2_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
+	&bfin_sport3_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(ezkit_early_devices,
+		ARRAY_SIZE(ezkit_early_devices));
+}
diff --git a/arch/blackfin/mach-bf548/include/mach/irq.h b/arch/blackfin/mach-bf548/include/mach/irq.h
index 106db05684ae..1f99b51a3d56 100644
--- a/arch/blackfin/mach-bf548/include/mach/irq.h
+++ b/arch/blackfin/mach-bf548/include/mach/irq.h
@@ -317,7 +317,8 @@ Events         (highest priority)  EMU         0
 
 #define GPIO_IRQ_BASE	IRQ_PA0
 
-#define NR_IRQS     (IRQ_PJ15+1)
+#define NR_MACH_IRQS	(IRQ_PJ15 + 1)
+#define NR_IRQS		(NR_MACH_IRQS + NR_SPARE_IRQS)
 
 /* For compatibility reasons with existing code */
 
diff --git a/arch/blackfin/mach-bf561/Makefile b/arch/blackfin/mach-bf561/Makefile
index 59e18afe28c6..b34029718318 100644
--- a/arch/blackfin/mach-bf561/Makefile
+++ b/arch/blackfin/mach-bf561/Makefile
@@ -6,3 +6,4 @@ obj-y := ints-priority.o dma.o
 
 obj-$(CONFIG_BF561_COREB) += coreb.o
 obj-$(CONFIG_SMP)  += smp.o secondary.o atomic.o
+obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
diff --git a/arch/blackfin/mach-bf561/boards/acvilon.c b/arch/blackfin/mach-bf561/boards/acvilon.c
index 07e8dc8770da..5163e2c383c5 100644
--- a/arch/blackfin/mach-bf561/boards/acvilon.c
+++ b/arch/blackfin/mach-bf561/boards/acvilon.c
@@ -176,7 +176,7 @@ static struct resource smsc911x_resources[] = {
 };
 
 static struct smsc911x_platform_config smsc911x_config = {
-	.flags = SMSC911X_USE_32BIT,
+	.flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
 	.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
 	.irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
 	.phy_interface = PHY_INTERFACE_MODE_MII,
diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c
index dfc8d5b77986..e127aedc1d7f 100644
--- a/arch/blackfin/mach-bf561/boards/cm_bf561.c
+++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c
@@ -72,7 +72,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 16,
@@ -111,7 +111,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 	{
 		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -305,21 +305,50 @@ static struct platform_device isp1362_hcd_device = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
 	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
+		.start = BFIN_UART_THR,
+		.end = BFIN_UART_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART_RX,
+		.end = IRQ_UART_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART_ERROR,
+		.end = IRQ_UART_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART_TX,
+		.end = CH_UART_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART_RX,
+		.end = CH_UART_RX,
+		.flags = IORESOURCE_DMA,
+	},
 };
 
-static struct platform_device bfin_uart_device = {
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
 	.name = "bfin-uart",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart_resources),
-	.resource = bfin_uart_resources,
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
@@ -463,7 +492,9 @@ static struct platform_device *cm_bf561_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-	&bfin_uart_device,
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
@@ -516,3 +547,18 @@ static int __init cm_bf561_init(void)
 }
 
 arch_initcall(cm_bf561_init);
+
+static struct platform_device *cm_bf561_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(cm_bf561_early_devices,
+		ARRAY_SIZE(cm_bf561_early_devices));
+}
diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c
index ffd3e6a80d1a..9b93e2f95791 100644
--- a/arch/blackfin/mach-bf561/boards/ezkit.c
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -160,21 +160,50 @@ static struct platform_device smc91x_device = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
 	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
+		.start = BFIN_UART_THR,
+		.end = BFIN_UART_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART_RX,
+		.end = IRQ_UART_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART_ERROR,
+		.end = IRQ_UART_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART_TX,
+		.end = CH_UART_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART_RX,
+		.end = CH_UART_RX,
+		.flags = IORESOURCE_DMA,
+	},
 };
 
-static struct platform_device bfin_uart_device = {
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
 	.name = "bfin-uart",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart_resources),
-	.resource = bfin_uart_resources,
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
@@ -245,8 +274,8 @@ static struct platform_device ezkit_flash_device = {
 };
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) \
-	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) \
+	|| defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 16,
@@ -299,8 +328,8 @@ static struct platform_device bfin_spi0_device = {
 #endif
 
 static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_SND_BLACKFIN_AD1836) \
-	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) \
+	|| defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 	{
 		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -412,7 +441,9 @@ static struct platform_device *ezkit_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-	&bfin_uart_device,
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
@@ -458,3 +489,18 @@ static int __init ezkit_init(void)
 }
 
 arch_initcall(ezkit_init);
+
+static struct platform_device *ezkit_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(ezkit_early_devices,
+		ARRAY_SIZE(ezkit_early_devices));
+}
diff --git a/arch/blackfin/mach-bf561/boards/tepla.c b/arch/blackfin/mach-bf561/boards/tepla.c
index 8ba7252455e1..d3017e53686b 100644
--- a/arch/blackfin/mach-bf561/boards/tepla.c
+++ b/arch/blackfin/mach-bf561/boards/tepla.c
@@ -42,6 +42,52 @@ static struct platform_device smc91x_device = {
 	.resource      = smc91x_resources,
 };
 
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
+	{
+		.start = BFIN_UART_THR,
+		.end = BFIN_UART_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART_RX,
+		.end = IRQ_UART_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART_ERROR,
+		.end = IRQ_UART_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART_TX,
+		.end = CH_UART_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART_RX,
+		.end = CH_UART_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
 static struct resource bfin_sir0_resources[] = {
@@ -73,6 +119,13 @@ static struct platform_device bfin_sir0_device = {
 
 static struct platform_device *tepla_devices[] __initdata = {
 	&smc91x_device,
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
 	&bfin_sir0_device,
@@ -87,3 +140,18 @@ static int __init tepla_init(void)
 }
 
 arch_initcall(tepla_init);
+
+static struct platform_device *tepla_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(tepla_early_devices,
+		ARRAY_SIZE(tepla_early_devices));
+}
diff --git a/arch/blackfin/mach-bf561/hotplug.c b/arch/blackfin/mach-bf561/hotplug.c
new file mode 100644
index 000000000000..c95169b612dc
--- /dev/null
+++ b/arch/blackfin/mach-bf561/hotplug.c
@@ -0,0 +1,32 @@
+/*
+ * Copyright 2007-2009 Analog Devices Inc.
+ *               Graff Yang <graf.yang@analog.com>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <asm/blackfin.h>
+#include <asm/smp.h>
+#define SIC_SYSIRQ(irq)	(irq - (IRQ_CORETMR + 1))
+
+int hotplug_coreb;
+
+void platform_cpu_die(void)
+{
+	unsigned long iwr[2] = {0, 0};
+	unsigned long bank = SIC_SYSIRQ(IRQ_SUPPLE_0) / 32;
+	unsigned long bit = 1 << (SIC_SYSIRQ(IRQ_SUPPLE_0) % 32);
+
+	hotplug_coreb = 1;
+
+	iwr[bank] = bit;
+
+	/* disable core timer */
+	bfin_write_TCNTL(0);
+
+	/* clear ipi interrupt IRQ_SUPPLE_0 */
+	bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | (1 << (10 + 1)));
+	SSYNC();
+
+	coreb_sleep(iwr[0], iwr[1], 0);
+}
diff --git a/arch/blackfin/mach-bf561/include/mach/irq.h b/arch/blackfin/mach-bf561/include/mach/irq.h
index 7b208db267bf..c95566ade51b 100644
--- a/arch/blackfin/mach-bf561/include/mach/irq.h
+++ b/arch/blackfin/mach-bf561/include/mach/irq.h
@@ -265,7 +265,8 @@
 
 #define GPIO_IRQ_BASE		IRQ_PF0
 
-#define NR_IRQS			(IRQ_PF47 + 1)
+#define NR_MACH_IRQS		(IRQ_PF47 + 1)
+#define NR_IRQS			(NR_MACH_IRQS + NR_SPARE_IRQS)
 
 #define IVG7			7
 #define IVG8			8
diff --git a/arch/blackfin/mach-bf561/include/mach/smp.h b/arch/blackfin/mach-bf561/include/mach/smp.h
index 390c7f4ae7b3..2c8c514dd386 100644
--- a/arch/blackfin/mach-bf561/include/mach/smp.h
+++ b/arch/blackfin/mach-bf561/include/mach/smp.h
@@ -25,4 +25,6 @@ void platform_send_ipi_cpu(unsigned int cpu);
 
 void platform_clear_ipi(unsigned int cpu);
 
+void bfin_local_timer_setup(void);
+
 #endif /* !_MACH_BF561_SMP */
diff --git a/arch/blackfin/mach-bf561/secondary.S b/arch/blackfin/mach-bf561/secondary.S
index 8e6050369c06..4624eebbf9c4 100644
--- a/arch/blackfin/mach-bf561/secondary.S
+++ b/arch/blackfin/mach-bf561/secondary.S
@@ -11,6 +11,7 @@
 #include <linux/init.h>
 #include <asm/blackfin.h>
 #include <asm/asm-offsets.h>
+#include <asm/trace.h>
 
 __INIT
 
@@ -62,6 +63,8 @@ ENTRY(_coreb_trampoline_start)
 	M2 = r0;
 	M3 = r0;
 
+	trace_buffer_init(p0,r0);
+
 	/* Turn off the icache */
 	p0.l = LO(IMEM_CONTROL);
 	p0.h = HI(IMEM_CONTROL);
@@ -159,6 +162,41 @@ ENTRY(_coreb_trampoline_start)
 ENDPROC(_coreb_trampoline_start)
 ENTRY(_coreb_trampoline_end)
 
+.section ".text"
+ENTRY(_set_sicb_iwr)
+	P0.H = hi(SICB_IWR0);
+	P0.L = lo(SICB_IWR0);
+	P1.H = hi(SICB_IWR1);
+	P1.L = lo(SICB_IWR1);
+	[P0] = R0;
+	[P1] = R1;
+	SSYNC;
+	RTS;
+ENDPROC(_set_sicb_iwr)
+
+ENTRY(_coreb_sleep)
+	sp.l = lo(INITIAL_STACK);
+	sp.h = hi(INITIAL_STACK);
+	fp = sp;
+	usp = sp;
+
+	call _set_sicb_iwr;
+
+	CLI R2;
+	SSYNC;
+	IDLE;
+	STI R2;
+
+	R0 = IWR_DISABLE_ALL;
+	R1 = IWR_DISABLE_ALL;
+	call _set_sicb_iwr;
+
+	p0.h = hi(COREB_L1_CODE_START);
+	p0.l = lo(COREB_L1_CODE_START);
+	jump (p0);
+ENDPROC(_coreb_sleep)
+
+__CPUINIT
 ENTRY(_coreb_start)
 	[--sp] = reti;
 
@@ -176,12 +214,20 @@ ENTRY(_coreb_start)
 	sp = [p0];
 	usp = sp;
 	fp = sp;
+#ifdef CONFIG_HOTPLUG_CPU
+	p0.l = _hotplug_coreb;
+	p0.h = _hotplug_coreb;
+	r0 = [p0];
+	cc = BITTST(r0, 0);
+	if cc jump 3f;
+#endif
 	sp += -12;
 	call _init_pda
 	sp += 12;
+#ifdef CONFIG_HOTPLUG_CPU
+3:
+#endif
 	call _secondary_start_kernel;
 .L_exit:
 	jump.s	.L_exit;
 ENDPROC(_coreb_start)
-
-__FINIT
diff --git a/arch/blackfin/mach-bf561/smp.c b/arch/blackfin/mach-bf561/smp.c
index 0192532e96a2..3b9a4bf7dacc 100644
--- a/arch/blackfin/mach-bf561/smp.c
+++ b/arch/blackfin/mach-bf561/smp.c
@@ -11,11 +11,10 @@
 #include <linux/delay.h>
 #include <asm/smp.h>
 #include <asm/dma.h>
+#include <asm/time.h>
 
 static DEFINE_SPINLOCK(boot_lock);
 
-static cpumask_t cpu_callin_map;
-
 /*
  * platform_init_cpus() - Tell the world about how many cores we
  * have. This is called while setting up the architecture support
@@ -66,13 +65,15 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 	bfin_write_SICB_IAR5(bfin_read_SICA_IAR5());
 	bfin_write_SICB_IAR6(bfin_read_SICA_IAR6());
 	bfin_write_SICB_IAR7(bfin_read_SICA_IAR7());
+	bfin_write_SICB_IWR0(IWR_DISABLE_ALL);
+	bfin_write_SICB_IWR1(IWR_DISABLE_ALL);
 	SSYNC();
 
 	/* Store CPU-private information to the cpu_data array. */
 	bfin_setup_cpudata(cpu);
 
 	/* We are done with local CPU inits, unblock the boot CPU. */
-	cpu_set(cpu, cpu_callin_map);
+	set_cpu_online(cpu, true);
 	spin_lock(&boot_lock);
 	spin_unlock(&boot_lock);
 }
@@ -81,28 +82,28 @@ int __cpuinit platform_boot_secondary(unsigned int cpu, struct task_struct *idle
 {
 	unsigned long timeout;
 
-	/* CoreB already running?! */
-	BUG_ON((bfin_read_SICA_SYSCR() & COREB_SRAM_INIT) == 0);
-
 	printk(KERN_INFO "Booting Core B.\n");
 
 	spin_lock(&boot_lock);
 
-	/* Kick CoreB, which should start execution from CORE_SRAM_BASE. */
-	SSYNC();
-	bfin_write_SICA_SYSCR(bfin_read_SICA_SYSCR() & ~COREB_SRAM_INIT);
-	SSYNC();
+	if ((bfin_read_SICA_SYSCR() & COREB_SRAM_INIT) == 0) {
+		/* CoreB already running, sending ipi to wakeup it */
+		platform_send_ipi_cpu(cpu, IRQ_SUPPLE_0);
+	} else {
+		/* Kick CoreB, which should start execution from CORE_SRAM_BASE. */
+		bfin_write_SICA_SYSCR(bfin_read_SICA_SYSCR() & ~COREB_SRAM_INIT);
+		SSYNC();
+	}
 
 	timeout = jiffies + 1 * HZ;
 	while (time_before(jiffies, timeout)) {
-		if (cpu_isset(cpu, cpu_callin_map))
+		if (cpu_online(cpu))
 			break;
 		udelay(100);
 		barrier();
 	}
 
-	if (cpu_isset(cpu, cpu_callin_map)) {
-		cpu_set(cpu, cpu_online_map);
+	if (cpu_online(cpu)) {
 		/* release the lock and let coreb run */
 		spin_unlock(&boot_lock);
 		return 0;
@@ -147,3 +148,20 @@ void platform_clear_ipi(unsigned int cpu)
 	bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | (1 << (10 + cpu)));
 	SSYNC();
 }
+
+/*
+ * Setup core B's local core timer.
+ * In SMP, core timer is used for clock event device.
+ */
+void __cpuinit bfin_local_timer_setup(void)
+{
+#if defined(CONFIG_TICKSOURCE_CORETMR)
+	bfin_coretmr_init();
+	bfin_coretmr_clockevent_init();
+	get_irq_chip(IRQ_CORETMR)->unmask(IRQ_CORETMR);
+#else
+	/* Power down the core timer, just to play safe. */
+	bfin_write_TCNTL(0);
+#endif
+
+}
diff --git a/arch/blackfin/mach-common/cpufreq.c b/arch/blackfin/mach-common/cpufreq.c
index 777582897253..4391d03dc845 100644
--- a/arch/blackfin/mach-common/cpufreq.c
+++ b/arch/blackfin/mach-common/cpufreq.c
@@ -11,10 +11,13 @@
 #include <linux/init.h>
 #include <linux/cpufreq.h>
 #include <linux/fs.h>
+#include <linux/delay.h>
 #include <asm/blackfin.h>
 #include <asm/time.h>
 #include <asm/dpmc.h>
 
+#define CPUFREQ_CPU 0
+
 /* this is the table of CCLK frequencies, in Hz */
 /* .index is the entry in the auxillary dpm_state_table[] */
 static struct cpufreq_frequency_table bfin_freq_table[] = {
@@ -41,64 +44,124 @@ static struct bfin_dpm_state {
 	unsigned int tscale; /* change the divider on the core timer interrupt */
 } dpm_state_table[3];
 
+#if defined(CONFIG_CYCLES_CLOCKSOURCE)
 /*
-   normalized to maximum frequncy offset for CYCLES,
-   used in time-ts cycles clock source, but could be used
-   somewhere also.
+ * normalized to maximum frequncy offset for CYCLES,
+ * used in time-ts cycles clock source, but could be used
+ * somewhere also.
  */
 unsigned long long __bfin_cycles_off;
 unsigned int __bfin_cycles_mod;
+#endif
 
 /**************************************************************************/
+static void __init bfin_init_tables(unsigned long cclk, unsigned long sclk)
+{
 
-static unsigned int bfin_getfreq_khz(unsigned int cpu)
+	unsigned long csel, min_cclk;
+	int index;
+
+	/* Anomaly 273 seems to still exist on non-BF54x w/dcache turned on */
+#if ANOMALY_05000273 || ANOMALY_05000274 || \
+	(!defined(CONFIG_BF54x) && defined(CONFIG_BFIN_EXTMEM_DCACHEABLE))
+	min_cclk = sclk * 2;
+#else
+	min_cclk = sclk;
+#endif
+	csel = ((bfin_read_PLL_DIV() & CSEL) >> 4);
+
+	for (index = 0;  (cclk >> index) >= min_cclk && csel <= 3; index++, csel++) {
+		bfin_freq_table[index].frequency = cclk >> index;
+		dpm_state_table[index].csel = csel << 4; /* Shift now into PLL_DIV bitpos */
+		dpm_state_table[index].tscale =  (TIME_SCALE / (1 << csel)) - 1;
+
+		pr_debug("cpufreq: freq:%d csel:0x%x tscale:%d\n",
+						 bfin_freq_table[index].frequency,
+						 dpm_state_table[index].csel,
+						 dpm_state_table[index].tscale);
+	}
+	return;
+}
+
+static void bfin_adjust_core_timer(void *info)
 {
-	/* The driver only support single cpu */
-	if (cpu != 0)
-		return -1;
+	unsigned int tscale;
+	unsigned int index = *(unsigned int *)info;
 
-	return get_cclk() / 1000;
+	/* we have to adjust the core timer, because it is using cclk */
+	tscale = dpm_state_table[index].tscale;
+	bfin_write_TSCALE(tscale);
+	return;
 }
 
+static unsigned int bfin_getfreq_khz(unsigned int cpu)
+{
+	/* Both CoreA/B have the same core clock */
+	return get_cclk() / 1000;
+}
 
-static int bfin_target(struct cpufreq_policy *policy,
+static int bfin_target(struct cpufreq_policy *poli,
 			unsigned int target_freq, unsigned int relation)
 {
-	unsigned int index, plldiv, tscale;
+	unsigned int index, plldiv, cpu;
 	unsigned long flags, cclk_hz;
 	struct cpufreq_freqs freqs;
+	static unsigned long lpj_ref;
+	static unsigned int  lpj_ref_freq;
+
+#if defined(CONFIG_CYCLES_CLOCKSOURCE)
 	cycles_t cycles;
+#endif
 
-	if (cpufreq_frequency_table_target(policy, bfin_freq_table,
-		 target_freq, relation, &index))
-		return -EINVAL;
-
-	cclk_hz = bfin_freq_table[index].frequency;
-
-	freqs.old = bfin_getfreq_khz(0);
-	freqs.new = cclk_hz;
-	freqs.cpu = 0;
-
-	pr_debug("cpufreq: changing cclk to %lu; target = %u, oldfreq = %u\n",
-		 cclk_hz, target_freq, freqs.old);
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-	local_irq_save_hw(flags);
-		plldiv = (bfin_read_PLL_DIV() & SSEL) | dpm_state_table[index].csel;
-		tscale = dpm_state_table[index].tscale;
-		bfin_write_PLL_DIV(plldiv);
-		/* we have to adjust the core timer, because it is using cclk */
-		bfin_write_TSCALE(tscale);
-		cycles = get_cycles();
-		SSYNC();
-	cycles += 10; /* ~10 cycles we lose after get_cycles() */
-	__bfin_cycles_off += (cycles << __bfin_cycles_mod) - (cycles << index);
-	__bfin_cycles_mod = index;
-	local_irq_restore_hw(flags);
-	/* TODO: just test case for cycles clock source, remove later */
-	pr_debug("cpufreq: done\n");
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+	for_each_online_cpu(cpu) {
+		struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
+
+		if (!policy)
+			continue;
+
+		if (cpufreq_frequency_table_target(policy, bfin_freq_table,
+				 target_freq, relation, &index))
+			return -EINVAL;
+
+		cclk_hz = bfin_freq_table[index].frequency;
+
+		freqs.old = bfin_getfreq_khz(0);
+		freqs.new = cclk_hz;
+		freqs.cpu = cpu;
+
+		pr_debug("cpufreq: changing cclk to %lu; target = %u, oldfreq = %u\n",
+			 cclk_hz, target_freq, freqs.old);
+
+		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+		if (cpu == CPUFREQ_CPU) {
+			local_irq_save_hw(flags);
+			plldiv = (bfin_read_PLL_DIV() & SSEL) |
+						dpm_state_table[index].csel;
+			bfin_write_PLL_DIV(plldiv);
+			on_each_cpu(bfin_adjust_core_timer, &index, 1);
+#if defined(CONFIG_CYCLES_CLOCKSOURCE)
+			cycles = get_cycles();
+			SSYNC();
+			cycles += 10; /* ~10 cycles we lose after get_cycles() */
+			__bfin_cycles_off +=
+			    (cycles << __bfin_cycles_mod) - (cycles << index);
+			__bfin_cycles_mod = index;
+#endif
+			if (!lpj_ref_freq) {
+				lpj_ref = loops_per_jiffy;
+				lpj_ref_freq = freqs.old;
+			}
+			if (freqs.new != freqs.old) {
+				loops_per_jiffy = cpufreq_scale(lpj_ref,
+						lpj_ref_freq, freqs.new);
+			}
+			local_irq_restore_hw(flags);
+		}
+		/* TODO: just test case for cycles clock source, remove later */
+		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+	}
 
+	pr_debug("cpufreq: done\n");
 	return 0;
 }
 
@@ -110,37 +173,16 @@ static int bfin_verify_speed(struct cpufreq_policy *policy)
 static int __init __bfin_cpu_init(struct cpufreq_policy *policy)
 {
 
-	unsigned long cclk, sclk, csel, min_cclk;
-	int index;
-
-	if (policy->cpu != 0)
-		return -EINVAL;
+	unsigned long cclk, sclk;
 
 	cclk = get_cclk() / 1000;
 	sclk = get_sclk() / 1000;
 
-#if ANOMALY_05000273 || ANOMALY_05000274 || \
-	(!defined(CONFIG_BF54x) && defined(CONFIG_BFIN_EXTMEM_DCACHEABLE))
-	min_cclk = sclk * 2;
-#else
-	min_cclk = sclk;
-#endif
-	csel = ((bfin_read_PLL_DIV() & CSEL) >> 4);
-
-	for (index = 0;  (cclk >> index) >= min_cclk && csel <= 3; index++, csel++) {
-		bfin_freq_table[index].frequency = cclk >> index;
-		dpm_state_table[index].csel = csel << 4; /* Shift now into PLL_DIV bitpos */
-		dpm_state_table[index].tscale =  (TIME_SCALE / (1 << csel)) - 1;
-
-		pr_debug("cpufreq: freq:%d csel:0x%x tscale:%d\n",
-						 bfin_freq_table[index].frequency,
-						 dpm_state_table[index].csel,
-						 dpm_state_table[index].tscale);
-	}
+	if (policy->cpu == CPUFREQ_CPU)
+		bfin_init_tables(cclk, sclk);
 
 	policy->cpuinfo.transition_latency = 50000; /* 50us assumed */
 
-	/*Now ,only support one cpu */
 	policy->cur = cclk;
 	cpufreq_frequency_table_get_attr(bfin_freq_table, policy->cpu);
 	return cpufreq_frequency_table_cpuinfo(policy, bfin_freq_table);
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 01b2f58dfb95..a5847f5d67c7 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -405,7 +405,7 @@ ENTRY(_double_fault)
 
 	r0 = sp;        /* stack frame pt_regs pointer argument ==> r0 */
 	SP += -12;
-	call _double_fault_c;
+	pseudo_long_call _double_fault_c, p5;
 	SP += 12;
 .L_double_fault_panic:
         JUMP .L_double_fault_panic
@@ -447,7 +447,7 @@ ENTRY(_exception_to_level5)
 
 	r0 = sp; 	/* stack frame pt_regs pointer argument ==> r0 */
 	SP += -12;
-	call _trap_c;
+	pseudo_long_call _trap_c, p4;
 	SP += 12;
 
 	/* If interrupts were off during the exception (IPEND[4] = 1), turn them off
@@ -482,6 +482,8 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/
 	[--sp] = ASTAT;
 	[--sp] = (R7:6,P5:4);
 
+	ANOMALY_283_315_WORKAROUND(p5, r7)
+
 #ifdef CONFIG_EXACT_HWERR
 	/* Make sure all pending read/writes complete. This will ensure any
 	 * accesses which could cause hardware errors completes, and signal
@@ -492,8 +494,6 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/
 	ssync;
 #endif
 
-	ANOMALY_283_315_WORKAROUND(p5, r7)
-
 #ifdef CONFIG_DEBUG_DOUBLEFAULT
 	/*
 	 * Save these registers, as they are only valid in exception context
@@ -551,7 +551,7 @@ ENTRY(_kernel_execve)
 	p0 = sp;
 	sp += -16;
 	[sp + 12] = p0;
-	call _do_execve;
+	pseudo_long_call _do_execve, p5;
 	SP += 16;
 	cc = r0 == 0;
 	if ! cc jump .Lexecve_failed;
@@ -626,13 +626,6 @@ ENTRY(_system_call)
 	p0 = [sp + PT_ORIG_P0];
 #endif /* CONFIG_IPIPE */
 
-	/* Check the System Call */
-	r7 = __NR_syscall;
-	/* System call number is passed in P0 */
-	r6 = p0;
-	cc = r6 < r7;
-	if ! cc jump .Lbadsys;
-
 	/* are we tracing syscalls?*/
 	r7 = sp;
 	r6.l = lo(ALIGN_PAGE_MASK);
@@ -642,6 +635,14 @@ ENTRY(_system_call)
 	r7 = [p2+TI_FLAGS];
 	CC = BITTST(r7,TIF_SYSCALL_TRACE);
 	if CC JUMP _sys_trace;
+	CC = BITTST(r7,TIF_SINGLESTEP);
+	if CC JUMP _sys_trace;
+
+	/* Make sure the system call # is valid */
+	p4 = __NR_syscall;
+	/* System call number is passed in P0 */
+	cc = p4 <= p0;
+	if cc jump .Lbadsys;
 
 	/* Execute the appropriate system call */
 
@@ -704,7 +705,7 @@ ENTRY(_system_call)
 	sp += 4;
 
 	SP += -12;
-	call _schedule;
+	pseudo_long_call _schedule, p4;
 	SP += 12;
 
 	jump .Lresume_userspace_1;
@@ -723,7 +724,7 @@ ENTRY(_system_call)
 
 	r0 = sp;
 	SP += -12;
-	call _do_notify_resume;
+	pseudo_long_call _do_notify_resume, p5;
 	SP += 12;
 
 .Lsyscall_really_exit:
@@ -736,11 +737,17 @@ ENDPROC(_system_call)
  * this symbol need not be global anyways, so ...
  */
 _sys_trace:
-	call _syscall_trace;
-
-	/* Execute the appropriate system call */
+	r0 = sp;
+	pseudo_long_call _syscall_trace_enter, p5;
 
+	/* Make sure the system call # is valid */
 	p4 = [SP + PT_P0];
+	p3 = __NR_syscall;
+	cc = p3 <= p4;
+	r0 = -ENOSYS;
+	if cc jump .Lsys_trace_badsys;
+
+	/* Execute the appropriate system call */
 	p5.l = _sys_call_table;
 	p5.h = _sys_call_table;
 	p5 = p5 + (p4 << 2);
@@ -758,9 +765,11 @@ _sys_trace:
 	SP += -12;
 	call (p5);
 	SP += 24;
+.Lsys_trace_badsys:
 	[sp + PT_R0] = r0;
 
-	call _syscall_trace;
+	r0 = sp;
+	pseudo_long_call _syscall_trace_leave, p5;
 	jump .Lresume_userspace;
 ENDPROC(_sys_trace)
 
@@ -966,6 +975,13 @@ ENTRY(_evt_evt14)
 #else
 	cli r0;
 #endif
+#ifdef CONFIG_TRACE_IRQFLAGS
+	[--sp] = rets;
+	sp += -12;
+	call _trace_hardirqs_off;
+	sp += 12;
+	rets = [sp++];
+#endif
 	[--sp] = RETI;
 	SP += 4;
 	rts;
@@ -989,6 +1005,14 @@ ENTRY(_schedule_and_signal_from_int)
 	p1 = rets;
 	[sp + PT_RESERVED] = p1;
 
+#ifdef CONFIG_TRACE_IRQFLAGS
+	/* trace_hardirqs_on() checks if all irqs are disabled. But here IRQ 15
+	 * is turned on, so disable all irqs. */
+	cli r0;
+	sp += -12;
+	call _trace_hardirqs_on;
+	sp += 12;
+#endif
 #ifdef CONFIG_SMP
 	GET_PDA(p0, r0); 	/* Fetch current PDA (can't migrate to other CPU here) */
 	r0 = [p0 + PDA_IRQFLAGS];
@@ -1007,7 +1031,8 @@ ENTRY(_schedule_and_signal_from_int)
 
 	r0 = sp;
 	sp += -12;
-	call _finish_atomic_sections;
+
+	pseudo_long_call _finish_atomic_sections, p5;
 	sp += 12;
 	jump.s .Lresume_userspace;
 ENDPROC(_schedule_and_signal_from_int)
@@ -1357,7 +1382,7 @@ ENTRY(_sys_call_table)
 	.long _sys_newuname
 	.long _sys_ni_syscall	/* old sys_modify_ldt */
 	.long _sys_adjtimex
-	.long _sys_ni_syscall	/* 125 */ /* sys_mprotect */
+	.long _sys_mprotect	/* 125 */
 	.long _sys_ni_syscall	/* old sys_sigprocmask */
 	.long _sys_ni_syscall	/* old "creat_module" */
 	.long _sys_init_module
@@ -1376,16 +1401,16 @@ ENTRY(_sys_call_table)
 	.long _sys_getdents
 	.long _sys_ni_syscall	/* sys_select */
 	.long _sys_flock
-	.long _sys_ni_syscall	/* sys_msync */
+	.long _sys_msync
 	.long _sys_readv		/* 145 */
 	.long _sys_writev
 	.long _sys_getsid
 	.long _sys_fdatasync
 	.long _sys_sysctl
-	.long _sys_ni_syscall	/* 150 */ /* sys_mlock */
-	.long _sys_ni_syscall	/* sys_munlock */
-	.long _sys_ni_syscall	/* sys_mlockall */
-	.long _sys_ni_syscall	/* sys_munlockall */
+	.long _sys_mlock	/* 150 */
+	.long _sys_munlock
+	.long _sys_mlockall
+	.long _sys_munlockall
 	.long _sys_sched_setparam
 	.long _sys_sched_getparam /* 155 */
 	.long _sys_sched_setscheduler
@@ -1450,8 +1475,8 @@ ENTRY(_sys_call_table)
 	.long _sys_setfsuid	/* 215 */
 	.long _sys_setfsgid
 	.long _sys_pivot_root
-	.long _sys_ni_syscall	/* sys_mincore */
-	.long _sys_ni_syscall	/* sys_madvise */
+	.long _sys_mincore
+	.long _sys_madvise
 	.long _sys_getdents64	/* 220 */
 	.long _sys_fcntl64
 	.long _sys_ni_syscall	/* reserved for TUX */
@@ -1507,7 +1532,7 @@ ENTRY(_sys_call_table)
 	.long _sys_utimes
 	.long _sys_fadvise64_64
 	.long _sys_ni_syscall /* vserver */
-	.long _sys_ni_syscall /* 275, mbind */
+	.long _sys_mbind	/* 275 */
 	.long _sys_ni_syscall /* get_mempolicy */
 	.long _sys_ni_syscall /* set_mempolicy */
 	.long _sys_mq_open
diff --git a/arch/blackfin/mach-common/head.S b/arch/blackfin/mach-common/head.S
index cab0a0031eee..4391621d9048 100644
--- a/arch/blackfin/mach-common/head.S
+++ b/arch/blackfin/mach-common/head.S
@@ -144,8 +144,8 @@ ENTRY(__start)
 #endif
 
 	/* Initialize stack pointer */
-	sp.l = _init_thread_union;
-	sp.h = _init_thread_union;
+	sp.l = _init_thread_union + THREAD_SIZE;
+	sp.h = _init_thread_union + THREAD_SIZE;
 	fp = sp;
 	usp = sp;
 
@@ -186,6 +186,11 @@ ENTRY(__start)
 
 	/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
 	call _bfin_relocate_l1_mem;
+
+#ifdef CONFIG_ROMKERNEL
+	call _bfin_relocate_xip_data;
+#endif
+
 #ifdef CONFIG_BFIN_KERNEL_CLOCK
 	/* Only use on-chip scratch space for stack when absolutely required
 	 * to avoid Anomaly 05000227 ... we know the init_clocks() func only
@@ -257,12 +262,7 @@ ENTRY(_real_start)
 	R0 = R7;
 	call _cmdline_init;
 
-	/* Load the current thread pointer and stack */
-	p1 = THREAD_SIZE + 4 (z);	/* +4 is for reti loading */
-	sp = sp + p1;
-	usp = sp;
-	fp = sp;
-	sp += -12;
+	sp += -12 + 4; /* +4 is for reti loading above */
 	call _init_pda
 	sp += 12;
 	jump.l _start_kernel;
diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S
index 8085ff1cce00..cee62cf4acd4 100644
--- a/arch/blackfin/mach-common/interrupt.S
+++ b/arch/blackfin/mach-common/interrupt.S
@@ -88,6 +88,13 @@ __common_int_entry:
 #else
 	cli r1;
 #endif
+#ifdef CONFIG_TRACE_IRQFLAGS
+	[--sp] = r0;
+	sp += -12;
+	call _trace_hardirqs_off;
+	sp += 12;
+	r0 = [sp++];
+#endif
 	[--sp] = RETI;  /* orig_pc */
 	/* Clear all L registers.  */
 	r1 = 0 (x);
@@ -109,10 +116,10 @@ __common_int_entry:
 	cc = r0 == 0;
 	if cc jump .Lcommon_restore_context;
 #else /* CONFIG_IPIPE */
-	call _do_irq;
+	pseudo_long_call _do_irq, p2;
 	SP += 12;
 #endif /* CONFIG_IPIPE */
-	call _return_from_int;
+	pseudo_long_call _return_from_int, p2;
 .Lcommon_restore_context:
 	RESTORE_CONTEXT
 	rti;
@@ -168,7 +175,7 @@ ENTRY(_evt_ivhw)
 
 	r0 = sp;        /* stack frame pt_regs pointer argument ==> r0 */
 	SP += -12;
-	call _trap_c;
+	pseudo_long_call _trap_c, p5;
 	SP += 12;
 
 #ifdef EBIU_ERRMST
@@ -179,7 +186,7 @@ ENTRY(_evt_ivhw)
 	w[p0] = r0.l;
 #endif
 
-	call _ret_from_exception;
+	pseudo_long_call _ret_from_exception, p2;
 
 .Lcommon_restore_all_sys:
 	RESTORE_ALL_SYS
@@ -187,12 +194,28 @@ ENTRY(_evt_ivhw)
 ENDPROC(_evt_ivhw)
 
 /* Interrupt routine for evt2 (NMI).
- * We don't actually use this, so just return.
  * For inner circle type details, please see:
  * http://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:nmi
  */
 ENTRY(_evt_nmi)
+#ifndef CONFIG_NMI_WATCHDOG
 .weak _evt_nmi
+#else
+	/* Not take account of CPLBs, this handler will not return */
+	SAVE_ALL_SYS
+	r0 = sp;
+	r1 = retn;
+	[sp + PT_PC] = r1;
+	trace_buffer_save(p4,r5);
+
+	ANOMALY_283_315_WORKAROUND(p4, r5)
+
+	SP += -12;
+	call _do_nmi;
+	SP += 12;
+1:
+	jump 1b;
+#endif
 	rtn;
 ENDPROC(_evt_nmi)
 
@@ -223,7 +246,7 @@ ENTRY(_evt_system_call)
 #ifdef CONFIG_FRAME_POINTER
 	fp = 0;
 #endif
-	call _system_call;
+	pseudo_long_call _system_call, p2;
 	jump .Lcommon_restore_context;
 ENDPROC(_evt_system_call)
 
diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c
index 1873b2c1fede..7ad8878bfa18 100644
--- a/arch/blackfin/mach-common/ints-priority.c
+++ b/arch/blackfin/mach-common/ints-priority.c
@@ -28,6 +28,7 @@
 #include <asm/dpmc.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/bfin_sport.h>
+#include <asm/bfin_can.h>
 
 #define SIC_SYSIRQ(irq)	(irq - (IRQ_CORETMR + 1))
 
@@ -172,7 +173,12 @@ static void bfin_internal_mask_irq(unsigned int irq)
 	local_irq_restore_hw(flags);
 }
 
+#ifdef CONFIG_SMP
+static void bfin_internal_unmask_irq_affinity(unsigned int irq,
+		const struct cpumask *affinity)
+#else
 static void bfin_internal_unmask_irq(unsigned int irq)
+#endif
 {
 	unsigned long flags;
 
@@ -185,16 +191,38 @@ static void bfin_internal_unmask_irq(unsigned int irq)
 	local_irq_save_hw(flags);
 	mask_bank = SIC_SYSIRQ(irq) / 32;
 	mask_bit = SIC_SYSIRQ(irq) % 32;
-	bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) |
-			     (1 << mask_bit));
 #ifdef CONFIG_SMP
-	bfin_write_SICB_IMASK(mask_bank, bfin_read_SICB_IMASK(mask_bank) |
-			     (1 << mask_bit));
+	if (cpumask_test_cpu(0, affinity))
+#endif
+		bfin_write_SIC_IMASK(mask_bank,
+			bfin_read_SIC_IMASK(mask_bank) |
+			(1 << mask_bit));
+#ifdef CONFIG_SMP
+	if (cpumask_test_cpu(1, affinity))
+		bfin_write_SICB_IMASK(mask_bank,
+			bfin_read_SICB_IMASK(mask_bank) |
+			(1 << mask_bit));
 #endif
 #endif
 	local_irq_restore_hw(flags);
 }
 
+#ifdef CONFIG_SMP
+static void bfin_internal_unmask_irq(unsigned int irq)
+{
+	struct irq_desc *desc = irq_to_desc(irq);
+	bfin_internal_unmask_irq_affinity(irq, desc->affinity);
+}
+
+static int bfin_internal_set_affinity(unsigned int irq, const struct cpumask *mask)
+{
+	bfin_internal_mask_irq(irq);
+	bfin_internal_unmask_irq_affinity(irq, mask);
+
+	return 0;
+}
+#endif
+
 #ifdef CONFIG_PM
 int bfin_internal_set_wake(unsigned int irq, unsigned int state)
 {
@@ -224,11 +252,6 @@ int bfin_internal_set_wake(unsigned int irq, unsigned int state)
 	wakeup |= USBWE;
 	break;
 #endif
-#ifdef IRQ_KEY
-	case IRQ_KEY:
-	wakeup |= KPADWE;
-	break;
-#endif
 #ifdef CONFIG_BF54x
 	case IRQ_CNT:
 	wakeup |= ROTWE;
@@ -270,6 +293,9 @@ static struct irq_chip bfin_internal_irqchip = {
 	.mask_ack = bfin_internal_mask_irq,
 	.disable = bfin_internal_mask_irq,
 	.enable = bfin_internal_unmask_irq,
+#ifdef CONFIG_SMP
+	.set_affinity = bfin_internal_set_affinity,
+#endif
 #ifdef CONFIG_PM
 	.set_wake = bfin_internal_set_wake,
 #endif
@@ -294,7 +320,6 @@ static int error_int_mask;
 static void bfin_generic_error_mask_irq(unsigned int irq)
 {
 	error_int_mask &= ~(1L << (irq - IRQ_PPI_ERROR));
-
 	if (!error_int_mask)
 		bfin_internal_mask_irq(IRQ_GENERIC_ERROR);
 }
@@ -385,6 +410,127 @@ static void bfin_demux_error_irq(unsigned int int_err_irq,
 }
 #endif				/* BF537_GENERIC_ERROR_INT_DEMUX */
 
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static int mac_stat_int_mask;
+
+static void bfin_mac_status_ack_irq(unsigned int irq)
+{
+	switch (irq) {
+	case IRQ_MAC_MMCINT:
+		bfin_write_EMAC_MMC_TIRQS(
+			bfin_read_EMAC_MMC_TIRQE() &
+			bfin_read_EMAC_MMC_TIRQS());
+		bfin_write_EMAC_MMC_RIRQS(
+			bfin_read_EMAC_MMC_RIRQE() &
+			bfin_read_EMAC_MMC_RIRQS());
+		break;
+	case IRQ_MAC_RXFSINT:
+		bfin_write_EMAC_RX_STKY(
+			bfin_read_EMAC_RX_IRQE() &
+			bfin_read_EMAC_RX_STKY());
+		break;
+	case IRQ_MAC_TXFSINT:
+		bfin_write_EMAC_TX_STKY(
+			bfin_read_EMAC_TX_IRQE() &
+			bfin_read_EMAC_TX_STKY());
+		break;
+	case IRQ_MAC_WAKEDET:
+		 bfin_write_EMAC_WKUP_CTL(
+			bfin_read_EMAC_WKUP_CTL() | MPKS | RWKS);
+		break;
+	default:
+		/* These bits are W1C */
+		bfin_write_EMAC_SYSTAT(1L << (irq - IRQ_MAC_PHYINT));
+		break;
+	}
+}
+
+static void bfin_mac_status_mask_irq(unsigned int irq)
+{
+	mac_stat_int_mask &= ~(1L << (irq - IRQ_MAC_PHYINT));
+#ifdef BF537_GENERIC_ERROR_INT_DEMUX
+	switch (irq) {
+	case IRQ_MAC_PHYINT:
+		bfin_write_EMAC_SYSCTL(bfin_read_EMAC_SYSCTL() & ~PHYIE);
+		break;
+	default:
+		break;
+	}
+#else
+	if (!mac_stat_int_mask)
+		bfin_internal_mask_irq(IRQ_MAC_ERROR);
+#endif
+	bfin_mac_status_ack_irq(irq);
+}
+
+static void bfin_mac_status_unmask_irq(unsigned int irq)
+{
+#ifdef BF537_GENERIC_ERROR_INT_DEMUX
+	switch (irq) {
+	case IRQ_MAC_PHYINT:
+		bfin_write_EMAC_SYSCTL(bfin_read_EMAC_SYSCTL() | PHYIE);
+		break;
+	default:
+		break;
+	}
+#else
+	if (!mac_stat_int_mask)
+		bfin_internal_unmask_irq(IRQ_MAC_ERROR);
+#endif
+	mac_stat_int_mask |= 1L << (irq - IRQ_MAC_PHYINT);
+}
+
+#ifdef CONFIG_PM
+int bfin_mac_status_set_wake(unsigned int irq, unsigned int state)
+{
+#ifdef BF537_GENERIC_ERROR_INT_DEMUX
+	return bfin_internal_set_wake(IRQ_GENERIC_ERROR, state);
+#else
+	return bfin_internal_set_wake(IRQ_MAC_ERROR, state);
+#endif
+}
+#endif
+
+static struct irq_chip bfin_mac_status_irqchip = {
+	.name = "MACST",
+	.ack = bfin_ack_noop,
+	.mask_ack = bfin_mac_status_mask_irq,
+	.mask = bfin_mac_status_mask_irq,
+	.unmask = bfin_mac_status_unmask_irq,
+#ifdef CONFIG_PM
+	.set_wake = bfin_mac_status_set_wake,
+#endif
+};
+
+static void bfin_demux_mac_status_irq(unsigned int int_err_irq,
+				 struct irq_desc *inta_desc)
+{
+	int i, irq = 0;
+	u32 status = bfin_read_EMAC_SYSTAT();
+
+	for (i = 0; i < (IRQ_MAC_STMDONE - IRQ_MAC_PHYINT); i++)
+		if (status & (1L << i)) {
+			irq = IRQ_MAC_PHYINT + i;
+			break;
+		}
+
+	if (irq) {
+		if (mac_stat_int_mask & (1L << (irq - IRQ_MAC_PHYINT))) {
+			bfin_handle_irq(irq);
+		} else {
+			bfin_mac_status_ack_irq(irq);
+			pr_debug("IRQ %d:"
+				 " MASKED MAC ERROR INTERRUPT ASSERTED\n",
+				 irq);
+		}
+	} else
+		printk(KERN_ERR
+		       "%s : %s : LINE %d :\nIRQ ?: MAC ERROR"
+		       " INTERRUPT ASSERTED BUT NO SOURCE FOUND\n",
+		       __func__, __FILE__, __LINE__);
+}
+#endif
+
 static inline void bfin_set_irq_handler(unsigned irq, irq_flow_handler_t handle)
 {
 #ifdef CONFIG_IPIPE
@@ -1031,7 +1177,6 @@ int __init init_arch_irq(void)
 #elif defined(CONFIG_BF538) || defined(CONFIG_BF539)
 		case IRQ_PORTF_INTA:
 #endif
-
 			set_irq_chained_handler(irq,
 						bfin_demux_gpio_irq);
 			break;
@@ -1040,29 +1185,36 @@ int __init init_arch_irq(void)
 			set_irq_chained_handler(irq, bfin_demux_error_irq);
 			break;
 #endif
-
-#ifdef CONFIG_SMP
-#ifdef CONFIG_TICKSOURCE_GPTMR0
-		case IRQ_TIMER0:
-#endif
-#ifdef CONFIG_TICKSOURCE_CORETMR
-		case IRQ_CORETMR:
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+		case IRQ_MAC_ERROR:
+			set_irq_chained_handler(irq, bfin_demux_mac_status_irq);
+			break;
 #endif
+#ifdef CONFIG_SMP
 		case IRQ_SUPPLE_0:
 		case IRQ_SUPPLE_1:
 			set_irq_handler(irq, handle_percpu_irq);
 			break;
 #endif
 
-#ifdef CONFIG_IPIPE
-#ifndef CONFIG_TICKSOURCE_CORETMR
-		case IRQ_TIMER0:
+#ifdef CONFIG_TICKSOURCE_CORETMR
+		case IRQ_CORETMR:
+# ifdef CONFIG_SMP
+			set_irq_handler(irq, handle_percpu_irq);
+			break;
+# else
 			set_irq_handler(irq, handle_simple_irq);
 			break;
+# endif
 #endif
-		case IRQ_CORETMR:
+
+#ifdef CONFIG_TICKSOURCE_GPTMR0
+		case IRQ_TIMER0:
 			set_irq_handler(irq, handle_simple_irq);
 			break;
+#endif
+
+#ifdef CONFIG_IPIPE
 		default:
 			set_irq_handler(irq, handle_level_irq);
 			break;
@@ -1078,14 +1230,22 @@ int __init init_arch_irq(void)
 	for (irq = IRQ_PPI_ERROR; irq <= IRQ_UART1_ERROR; irq++)
 		set_irq_chip_and_handler(irq, &bfin_generic_error_irqchip,
 					 handle_level_irq);
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+	set_irq_chained_handler(IRQ_MAC_ERROR, bfin_demux_mac_status_irq);
+#endif
 #endif
 
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+	for (irq = IRQ_MAC_PHYINT; irq <= IRQ_MAC_STMDONE; irq++)
+		set_irq_chip_and_handler(irq, &bfin_mac_status_irqchip,
+					 handle_level_irq);
+#endif
 	/* if configured as edge, then will be changed to do_edge_IRQ */
-	for (irq = GPIO_IRQ_BASE; irq < NR_IRQS; irq++)
+	for (irq = GPIO_IRQ_BASE;
+		irq < (GPIO_IRQ_BASE + MAX_BLACKFIN_GPIOS); irq++)
 		set_irq_chip_and_handler(irq, &bfin_gpio_irqchip,
 					 handle_level_irq);
 
-
 	bfin_write_IMASK(0);
 	CSYNC();
 	ilat = bfin_read_ILAT();
diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c
index 369e687582b7..7803f22d2ca7 100644
--- a/arch/blackfin/mach-common/smp.c
+++ b/arch/blackfin/mach-common/smp.c
@@ -122,9 +122,17 @@ static void ipi_call_function(unsigned int cpu, struct ipi_message *msg)
 	wait = msg->call_struct.wait;
 	cpu_clear(cpu, msg->call_struct.pending);
 	func(info);
-	if (wait)
+	if (wait) {
+#ifdef __ARCH_SYNC_CORE_DCACHE
+		/*
+		 * 'wait' usually means synchronization between CPUs.
+		 * Invalidate D cache in case shared data was changed
+		 * by func() to ensure cache coherence.
+		 */
+		resync_core_dcache();
+#endif
 		cpu_clear(cpu, msg->call_struct.waitmask);
-	else
+	} else
 		kfree(msg);
 }
 
@@ -219,6 +227,13 @@ int smp_call_function(void (*func)(void *info), void *info, int wait)
 			blackfin_dcache_invalidate_range(
 				(unsigned long)(&msg->call_struct.waitmask),
 				(unsigned long)(&msg->call_struct.waitmask));
+#ifdef __ARCH_SYNC_CORE_DCACHE
+		/*
+		 * Invalidate D cache in case shared data was changed by
+		 * other processors to ensure cache coherence.
+		 */
+		resync_core_dcache();
+#endif
 		kfree(msg);
 	}
 	return 0;
@@ -261,6 +276,13 @@ int smp_call_function_single(int cpuid, void (*func) (void *info), void *info,
 			blackfin_dcache_invalidate_range(
 				(unsigned long)(&msg->call_struct.waitmask),
 				(unsigned long)(&msg->call_struct.waitmask));
+#ifdef __ARCH_SYNC_CORE_DCACHE
+		/*
+		 * Invalidate D cache in case shared data was changed by
+		 * other processors to ensure cache coherence.
+		 */
+		resync_core_dcache();
+#endif
 		kfree(msg);
 	}
 	return 0;
@@ -322,8 +344,11 @@ void smp_send_stop(void)
 
 int __cpuinit __cpu_up(unsigned int cpu)
 {
-	struct task_struct *idle;
 	int ret;
+	static struct task_struct *idle;
+
+	if (idle)
+		free_task(idle);
 
 	idle = fork_idle(cpu);
 	if (IS_ERR(idle)) {
@@ -332,7 +357,6 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	}
 
 	secondary_stack = task_stack_page(idle) + THREAD_SIZE;
-	smp_wmb();
 
 	ret = platform_boot_secondary(cpu, idle);
 
@@ -343,9 +367,6 @@ int __cpuinit __cpu_up(unsigned int cpu)
 
 static void __cpuinit setup_secondary(unsigned int cpu)
 {
-#if !defined(CONFIG_TICKSOURCE_GPTMR0)
-	struct irq_desc *timer_desc;
-#endif
 	unsigned long ilat;
 
 	bfin_write_IMASK(0);
@@ -360,17 +381,6 @@ static void __cpuinit setup_secondary(unsigned int cpu)
 	bfin_irq_flags |= IMASK_IVG15 |
 	    IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 |
 	    IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW;
-
-#if defined(CONFIG_TICKSOURCE_GPTMR0)
-	/* Power down the core timer, just to play safe. */
-	bfin_write_TCNTL(0);
-
-	/* system timer0 has been setup by CoreA. */
-#else
-	timer_desc = irq_desc + IRQ_CORETMR;
-	setup_core_timer();
-	timer_desc->chip->enable(IRQ_CORETMR);
-#endif
 }
 
 void __cpuinit secondary_start_kernel(void)
@@ -405,7 +415,6 @@ void __cpuinit secondary_start_kernel(void)
 	atomic_inc(&mm->mm_users);
 	atomic_inc(&mm->mm_count);
 	current->active_mm = mm;
-	BUG_ON(current->mm);	/* Can't be, but better be safe than sorry. */
 
 	preempt_disable();
 
@@ -413,6 +422,9 @@ void __cpuinit secondary_start_kernel(void)
 
 	platform_secondary_init(cpu);
 
+	/* setup local core timer */
+	bfin_local_timer_setup();
+
 	local_irq_enable();
 
 	/*
@@ -462,25 +474,58 @@ void smp_icache_flush_range_others(unsigned long start, unsigned long end)
 EXPORT_SYMBOL_GPL(smp_icache_flush_range_others);
 
 #ifdef __ARCH_SYNC_CORE_ICACHE
+unsigned long icache_invld_count[NR_CPUS];
 void resync_core_icache(void)
 {
 	unsigned int cpu = get_cpu();
 	blackfin_invalidate_entire_icache();
-	++per_cpu(cpu_data, cpu).icache_invld_count;
+	icache_invld_count[cpu]++;
 	put_cpu();
 }
 EXPORT_SYMBOL(resync_core_icache);
 #endif
 
 #ifdef __ARCH_SYNC_CORE_DCACHE
+unsigned long dcache_invld_count[NR_CPUS];
 unsigned long barrier_mask __attribute__ ((__section__(".l2.bss")));
 
 void resync_core_dcache(void)
 {
 	unsigned int cpu = get_cpu();
 	blackfin_invalidate_entire_dcache();
-	++per_cpu(cpu_data, cpu).dcache_invld_count;
+	dcache_invld_count[cpu]++;
 	put_cpu();
 }
 EXPORT_SYMBOL(resync_core_dcache);
 #endif
+
+#ifdef CONFIG_HOTPLUG_CPU
+int __cpuexit __cpu_disable(void)
+{
+	unsigned int cpu = smp_processor_id();
+
+	if (cpu == 0)
+		return -EPERM;
+
+	set_cpu_online(cpu, false);
+	return 0;
+}
+
+static DECLARE_COMPLETION(cpu_killed);
+
+int __cpuexit __cpu_die(unsigned int cpu)
+{
+	return wait_for_completion_timeout(&cpu_killed, 5000);
+}
+
+void cpu_die(void)
+{
+	complete(&cpu_killed);
+
+	atomic_dec(&init_mm.mm_users);
+	atomic_dec(&init_mm.mm_count);
+
+	local_irq_disable();
+	platform_cpu_die();
+}
+#endif
diff --git a/arch/blackfin/mm/isram-driver.c b/arch/blackfin/mm/isram-driver.c
index 84cdc5a1c139..9213e2357888 100644
--- a/arch/blackfin/mm/isram-driver.c
+++ b/arch/blackfin/mm/isram-driver.c
@@ -62,7 +62,7 @@ static void isram_write(const void *addr, uint64_t data)
 	uint32_t cmd;
 	unsigned long flags;
 
-	if (addr >= (void *)(L1_CODE_START + L1_CODE_LENGTH))
+	if (unlikely(addr >= (void *)(L1_CODE_START + L1_CODE_LENGTH)))
 		return;
 
 	cmd = IADDR2DTEST(addr) | 2;             /* write */
@@ -93,7 +93,7 @@ static uint64_t isram_read(const void *addr)
 	unsigned long flags;
 	uint64_t ret;
 
-	if (addr > (void *)(L1_CODE_START + L1_CODE_LENGTH))
+	if (unlikely(addr > (void *)(L1_CODE_START + L1_CODE_LENGTH)))
 		return 0;
 
 	cmd = IADDR2DTEST(addr) | 0;              /* read */
@@ -120,7 +120,7 @@ static bool isram_check_addr(const void *addr, size_t n)
 {
 	if ((addr >= (void *)L1_CODE_START) &&
 	    (addr < (void *)(L1_CODE_START + L1_CODE_LENGTH))) {
-		if ((addr + n) > (void *)(L1_CODE_START + L1_CODE_LENGTH)) {
+		if (unlikely((addr + n) > (void *)(L1_CODE_START + L1_CODE_LENGTH))) {
 			show_stack(NULL, NULL);
 			pr_err("copy involving %p length (%zu) too long\n", addr, n);
 		}
diff --git a/arch/blackfin/mm/sram-alloc.c b/arch/blackfin/mm/sram-alloc.c
index f068c11ea98f..5732da25ee2d 100644
--- a/arch/blackfin/mm/sram-alloc.c
+++ b/arch/blackfin/mm/sram-alloc.c
@@ -402,7 +402,7 @@ void *l1_data_A_sram_alloc(size_t size)
 	void *addr;
 	unsigned int cpu;
 
-	cpu = get_cpu();
+	cpu = smp_processor_id();
 	/* add mutex operation */
 	spin_lock_irqsave(&per_cpu(l1_data_sram_lock, cpu), flags);
 
@@ -411,7 +411,6 @@ void *l1_data_A_sram_alloc(size_t size)
 
 	/* add mutex operation */
 	spin_unlock_irqrestore(&per_cpu(l1_data_sram_lock, cpu), flags);
-	put_cpu();
 
 	pr_debug("Allocated address in l1_data_A_sram_alloc is 0x%lx+0x%lx\n",
 		 (long unsigned int)addr, size);
@@ -430,7 +429,7 @@ int l1_data_A_sram_free(const void *addr)
 	int ret;
 	unsigned int cpu;
 
-	cpu = get_cpu();
+	cpu = smp_processor_id();
 	/* add mutex operation */
 	spin_lock_irqsave(&per_cpu(l1_data_sram_lock, cpu), flags);
 
@@ -439,7 +438,6 @@ int l1_data_A_sram_free(const void *addr)
 
 	/* add mutex operation */
 	spin_unlock_irqrestore(&per_cpu(l1_data_sram_lock, cpu), flags);
-	put_cpu();
 
 	return ret;
 #else
@@ -455,7 +453,7 @@ void *l1_data_B_sram_alloc(size_t size)
 	void *addr;
 	unsigned int cpu;
 
-	cpu = get_cpu();
+	cpu = smp_processor_id();
 	/* add mutex operation */
 	spin_lock_irqsave(&per_cpu(l1_data_sram_lock, cpu), flags);
 
@@ -464,7 +462,6 @@ void *l1_data_B_sram_alloc(size_t size)
 
 	/* add mutex operation */
 	spin_unlock_irqrestore(&per_cpu(l1_data_sram_lock, cpu), flags);
-	put_cpu();
 
 	pr_debug("Allocated address in l1_data_B_sram_alloc is 0x%lx+0x%lx\n",
 		 (long unsigned int)addr, size);
@@ -483,7 +480,7 @@ int l1_data_B_sram_free(const void *addr)
 	int ret;
 	unsigned int cpu;
 
-	cpu = get_cpu();
+	cpu = smp_processor_id();
 	/* add mutex operation */
 	spin_lock_irqsave(&per_cpu(l1_data_sram_lock, cpu), flags);
 
@@ -492,7 +489,6 @@ int l1_data_B_sram_free(const void *addr)
 
 	/* add mutex operation */
 	spin_unlock_irqrestore(&per_cpu(l1_data_sram_lock, cpu), flags);
-	put_cpu();
 
 	return ret;
 #else
@@ -540,7 +536,7 @@ void *l1_inst_sram_alloc(size_t size)
 	void *addr;
 	unsigned int cpu;
 
-	cpu = get_cpu();
+	cpu = smp_processor_id();
 	/* add mutex operation */
 	spin_lock_irqsave(&per_cpu(l1_inst_sram_lock, cpu), flags);
 
@@ -549,7 +545,6 @@ void *l1_inst_sram_alloc(size_t size)
 
 	/* add mutex operation */
 	spin_unlock_irqrestore(&per_cpu(l1_inst_sram_lock, cpu), flags);
-	put_cpu();
 
 	pr_debug("Allocated address in l1_inst_sram_alloc is 0x%lx+0x%lx\n",
 		 (long unsigned int)addr, size);
@@ -568,7 +563,7 @@ int l1_inst_sram_free(const void *addr)
 	int ret;
 	unsigned int cpu;
 
-	cpu = get_cpu();
+	cpu = smp_processor_id();
 	/* add mutex operation */
 	spin_lock_irqsave(&per_cpu(l1_inst_sram_lock, cpu), flags);
 
@@ -577,7 +572,6 @@ int l1_inst_sram_free(const void *addr)
 
 	/* add mutex operation */
 	spin_unlock_irqrestore(&per_cpu(l1_inst_sram_lock, cpu), flags);
-	put_cpu();
 
 	return ret;
 #else
@@ -593,7 +587,7 @@ void *l1sram_alloc(size_t size)
 	void *addr;
 	unsigned int cpu;
 
-	cpu = get_cpu();
+	cpu = smp_processor_id();
 	/* add mutex operation */
 	spin_lock_irqsave(&per_cpu(l1sram_lock, cpu), flags);
 
@@ -602,7 +596,6 @@ void *l1sram_alloc(size_t size)
 
 	/* add mutex operation */
 	spin_unlock_irqrestore(&per_cpu(l1sram_lock, cpu), flags);
-	put_cpu();
 
 	return addr;
 }
@@ -614,7 +607,7 @@ void *l1sram_alloc_max(size_t *psize)
 	void *addr;
 	unsigned int cpu;
 
-	cpu = get_cpu();
+	cpu = smp_processor_id();
 	/* add mutex operation */
 	spin_lock_irqsave(&per_cpu(l1sram_lock, cpu), flags);
 
@@ -623,7 +616,6 @@ void *l1sram_alloc_max(size_t *psize)
 
 	/* add mutex operation */
 	spin_unlock_irqrestore(&per_cpu(l1sram_lock, cpu), flags);
-	put_cpu();
 
 	return addr;
 }
@@ -635,7 +627,7 @@ int l1sram_free(const void *addr)
 	int ret;
 	unsigned int cpu;
 
-	cpu = get_cpu();
+	cpu = smp_processor_id();
 	/* add mutex operation */
 	spin_lock_irqsave(&per_cpu(l1sram_lock, cpu), flags);
 
@@ -644,7 +636,6 @@ int l1sram_free(const void *addr)
 
 	/* add mutex operation */
 	spin_unlock_irqrestore(&per_cpu(l1sram_lock, cpu), flags);
-	put_cpu();
 
 	return ret;
 }
diff --git a/arch/cris/arch-v10/kernel/entry.S b/arch/cris/arch-v10/kernel/entry.S
index c52bef39e250..0d6420d087fd 100644
--- a/arch/cris/arch-v10/kernel/entry.S
+++ b/arch/cris/arch-v10/kernel/entry.S
@@ -692,7 +692,7 @@ sys_call_table:
 	.long sys_swapon
 	.long sys_reboot
 	.long sys_old_readdir
-	.long old_mmap		/* 90 */
+	.long sys_old_mmap	/* 90 */
 	.long sys_munmap
 	.long sys_truncate
 	.long sys_ftruncate
diff --git a/arch/cris/arch-v10/kernel/ptrace.c b/arch/cris/arch-v10/kernel/ptrace.c
index ee505b2eb4db..e70c804e9377 100644
--- a/arch/cris/arch-v10/kernel/ptrace.c
+++ b/arch/cris/arch-v10/kernel/ptrace.c
@@ -127,57 +127,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 			ret = 0;
 			break;
 
-		case PTRACE_SYSCALL:
-		case PTRACE_CONT:
-			ret = -EIO;
-			
-			if (!valid_signal(data))
-				break;
-                        
-			if (request == PTRACE_SYSCALL) {
-				set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-			}
-			else {
-				clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-			}
-			
-			child->exit_code = data;
-			
-			/* TODO: make sure any pending breakpoint is killed */
-			wake_up_process(child);
-			ret = 0;
-			
-			break;
-		
- 		/* Make the child exit by sending it a sigkill. */
-		case PTRACE_KILL:
-			ret = 0;
-			
-			if (child->exit_state == EXIT_ZOMBIE)
-				break;
-			
-			child->exit_code = SIGKILL;
-			
-			/* TODO: make sure any pending breakpoint is killed */
-			wake_up_process(child);
-			break;
-
-		/* Set the trap flag. */
-		case PTRACE_SINGLESTEP:
-			ret = -EIO;
-			
-			if (!valid_signal(data))
-				break;
-			
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-
-			/* TODO: set some clever breakpoint mechanism... */
-
-			child->exit_code = data;
-			wake_up_process(child);
-			ret = 0;
-			break;
-
 		/* Get all GP registers from the child. */
 		case PTRACE_GETREGS: {
 		  	int i;
diff --git a/arch/cris/arch-v10/lib/old_checksum.c b/arch/cris/arch-v10/lib/old_checksum.c
index 1734b467efa6..8f79163f1394 100644
--- a/arch/cris/arch-v10/lib/old_checksum.c
+++ b/arch/cris/arch-v10/lib/old_checksum.c
@@ -77,7 +77,7 @@ __wsum csum_partial(const void *p, int len, __wsum __sum)
 		sum += *buff++;
 
 	if (endMarker > buff)
-		sum += *(const u8 *)buff;	/* add extra byte seperately */
+		sum += *(const u8 *)buff;	/* add extra byte separately */
 
 	BITOFF;
 	return (__force __wsum)sum;
diff --git a/arch/cris/arch-v32/kernel/entry.S b/arch/cris/arch-v32/kernel/entry.S
index 435b9671bd4b..1f39861eac8c 100644
--- a/arch/cris/arch-v32/kernel/entry.S
+++ b/arch/cris/arch-v32/kernel/entry.S
@@ -615,7 +615,7 @@ sys_call_table:
 	.long sys_swapon
 	.long sys_reboot
 	.long sys_old_readdir
-	.long old_mmap		/* 90 */
+	.long sys_old_mmap	/* 90 */
 	.long sys_munmap
 	.long sys_truncate
 	.long sys_ftruncate
diff --git a/arch/cris/arch-v32/kernel/ptrace.c b/arch/cris/arch-v32/kernel/ptrace.c
index dd401473f5b5..f4ebd1e7d0f5 100644
--- a/arch/cris/arch-v32/kernel/ptrace.c
+++ b/arch/cris/arch-v32/kernel/ptrace.c
@@ -78,6 +78,35 @@ int put_reg(struct task_struct *task, unsigned int regno, unsigned long data)
 	return 0;
 }
 
+void user_enable_single_step(struct task_struct *child)
+{
+	unsigned long tmp;
+
+	/*
+	 * Set up SPC if not set already (in which case we have no other
+	 * choice but to trust it).
+	 */
+	if (!get_reg(child, PT_SPC)) {
+		/* In case we're stopped in a delay slot. */
+		tmp = get_reg(child, PT_ERP) & ~1;
+		put_reg(child, PT_SPC, tmp);
+	}
+	tmp = get_reg(child, PT_CCS) | SBIT_USER;
+	put_reg(child, PT_CCS, tmp);
+}
+
+void user_disable_single_step(struct task_struct *child)
+{
+	put_reg(child, PT_SPC, 0);
+
+	if (!get_debugreg(child->pid, PT_BP_CTRL)) {
+		unsigned long tmp;
+		/* If no h/w bp configured, disable S bit. */
+		tmp = get_reg(child, PT_CCS) & ~SBIT_USER;
+		put_reg(child, PT_CCS, tmp);
+	}
+}
+
 /*
  * Called by kernel/ptrace.c when detaching.
  *
@@ -89,8 +118,7 @@ ptrace_disable(struct task_struct *child)
 	unsigned long tmp;
 
 	/* Deconfigure SPC and S-bit. */
-	tmp = get_reg(child, PT_CCS) & ~SBIT_USER;
-	put_reg(child, PT_CCS, tmp);
+	user_disable_single_step(child);
 	put_reg(child, PT_SPC, 0);
 
 	/* Deconfigure any watchpoints associated with the child. */
@@ -169,83 +197,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 			ret = 0;
 			break;
 
-		case PTRACE_SYSCALL:
-		case PTRACE_CONT:
-			ret = -EIO;
-
-			if (!valid_signal(data))
-				break;
-
-			/* Continue means no single-step. */
-			put_reg(child, PT_SPC, 0);
-
-			if (!get_debugreg(child->pid, PT_BP_CTRL)) {
-				unsigned long tmp;
-				/* If no h/w bp configured, disable S bit. */
-				tmp = get_reg(child, PT_CCS) & ~SBIT_USER;
-				put_reg(child, PT_CCS, tmp);
-			}
-
-			if (request == PTRACE_SYSCALL) {
-				set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-			}
-			else {
-				clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-			}
-
-			child->exit_code = data;
-
-			/* TODO: make sure any pending breakpoint is killed */
-			wake_up_process(child);
-			ret = 0;
-
-			break;
-
-		/* Make the child exit by sending it a sigkill. */
-		case PTRACE_KILL:
-			ret = 0;
-
-			if (child->exit_state == EXIT_ZOMBIE)
-				break;
-
-			child->exit_code = SIGKILL;
-
-			/* Deconfigure single-step and h/w bp. */
-			ptrace_disable(child);
-
-			/* TODO: make sure any pending breakpoint is killed */
-			wake_up_process(child);
-			break;
-
-		/* Set the trap flag. */
-		case PTRACE_SINGLESTEP:	{
-			unsigned long tmp;
-			ret = -EIO;
-
-			/* Set up SPC if not set already (in which case we have
-			   no other choice but to trust it). */
-			if (!get_reg(child, PT_SPC)) {
-				/* In case we're stopped in a delay slot. */
-				tmp = get_reg(child, PT_ERP) & ~1;
-				put_reg(child, PT_SPC, tmp);
-			}
-			tmp = get_reg(child, PT_CCS) | SBIT_USER;
-			put_reg(child, PT_CCS, tmp);
-
-			if (!valid_signal(data))
-				break;
-
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-
-			/* TODO: set some clever breakpoint mechanism... */
-
-			child->exit_code = data;
-			wake_up_process(child);
-			ret = 0;
-			break;
-
-		}
-
 		/* Get all GP registers from the child. */
 		case PTRACE_GETREGS: {
 			int i;
diff --git a/arch/cris/arch-v32/mm/tlb.c b/arch/cris/arch-v32/mm/tlb.c
index 6779bcb28ab0..c030d020660a 100644
--- a/arch/cris/arch-v32/mm/tlb.c
+++ b/arch/cris/arch-v32/mm/tlb.c
@@ -189,7 +189,7 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next,
 		spin_unlock(&mmu_context_lock);
 
 		/*
-		 * Remember the pgd for the fault handlers. Keep a seperate
+		 * Remember the pgd for the fault handlers. Keep a separate
 		 * copy of it because current and active_mm might be invalid
 		 * at points where * there's still a need to derefer the pgd.
 		 */
diff --git a/arch/cris/include/arch-v32/arch/ptrace.h b/arch/cris/include/arch-v32/arch/ptrace.h
index 41f4e8662bc2..ffca8d0f2e17 100644
--- a/arch/cris/include/arch-v32/arch/ptrace.h
+++ b/arch/cris/include/arch-v32/arch/ptrace.h
@@ -108,6 +108,7 @@ struct switch_stack {
 
 #ifdef __KERNEL__
 
+#define arch_has_single_step() (1)
 #define user_mode(regs) (((regs)->ccs & (1 << (U_CCS_BITNR + CCS_SHIFT))) != 0)
 #define instruction_pointer(regs) ((regs)->erp)
 extern void show_regs(struct pt_regs *);
diff --git a/arch/cris/include/asm/pci.h b/arch/cris/include/asm/pci.h
index 730ce40fdd0f..9f1cd56da28c 100644
--- a/arch/cris/include/asm/pci.h
+++ b/arch/cris/include/asm/pci.h
@@ -44,14 +44,6 @@ struct pci_dev;
  */
 #define PCI_DMA_BUS_IS_PHYS	(1)
 
-/* pci_unmap_{page,single} is a nop so... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
-#define pci_unmap_addr(PTR, ADDR_NAME)		(0)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	do { } while (0)
-#define pci_unmap_len(PTR, LEN_NAME)		(0)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0)
-
 #define HAVE_PCI_MMAP
 extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
 			       enum pci_mmap_state mmap_state, int write_combine);
diff --git a/arch/cris/include/asm/unistd.h b/arch/cris/include/asm/unistd.h
index c17079388bb9..f6fad83b3a8c 100644
--- a/arch/cris/include/asm/unistd.h
+++ b/arch/cris/include/asm/unistd.h
@@ -352,6 +352,7 @@
 #define __ARCH_WANT_STAT64
 #define __ARCH_WANT_SYS_ALARM
 #define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_IPC
 #define __ARCH_WANT_SYS_PAUSE
 #define __ARCH_WANT_SYS_SGETMASK
 #define __ARCH_WANT_SYS_SIGNAL
@@ -364,6 +365,7 @@
 #define __ARCH_WANT_SYS_LLSEEK
 #define __ARCH_WANT_SYS_NICE
 #define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLD_MMAP
 #define __ARCH_WANT_SYS_OLDUMOUNT
 #define __ARCH_WANT_SYS_SIGPENDING
 #define __ARCH_WANT_SYS_SIGPROCMASK
diff --git a/arch/cris/kernel/sys_cris.c b/arch/cris/kernel/sys_cris.c
index c2bbb1ac98a9..7aa036ec78ff 100644
--- a/arch/cris/kernel/sys_cris.c
+++ b/arch/cris/kernel/sys_cris.c
@@ -26,24 +26,6 @@
 #include <asm/uaccess.h>
 #include <asm/segment.h>
 
-asmlinkage unsigned long old_mmap(unsigned long __user *args)
-{        
-	unsigned long buffer[6];
-	int err = -EFAULT;
-
-	if (copy_from_user(&buffer, args, sizeof(buffer)))
-		goto out;
-
-	err = -EINVAL;
-	if (buffer[5] & ~PAGE_MASK) /* verify that offset is on page boundary */
-		goto out;
-
-	err = sys_mmap_pgoff(buffer[0], buffer[1], buffer[2], buffer[3],
-                       buffer[4], buffer[5] >> PAGE_SHIFT);
-out:
-	return err;
-}
-
 asmlinkage long
 sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot,
           unsigned long flags, unsigned long fd, unsigned long pgoff)
@@ -51,81 +33,3 @@ sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot,
 	/* bug(?): 8Kb pages here */
         return sys_mmap_pgoff(addr, len, prot, flags, fd, pgoff);
 }
-
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly. (same as arch/i386)
- */
-
-asmlinkage int sys_ipc (uint call, int first, int second,
-			int third, void __user *ptr, long fifth)
-{
-	int version, ret;
-
-	version = call >> 16; /* hack for backward compatibility */
-	call &= 0xffff;
-
-	switch (call) {
-	case SEMOP:
-		return sys_semtimedop (first, (struct sembuf __user *)ptr, second, NULL);
-	case SEMTIMEDOP:
-		return sys_semtimedop(first, (struct sembuf __user *)ptr, second,
-					(const struct timespec __user *)fifth);
-
-	case SEMGET:
-		return sys_semget (first, second, third);
-	case SEMCTL: {
-		union semun fourth;
-		if (!ptr)
-			return -EINVAL;
-		if (get_user(fourth.__pad, (void * __user *) ptr))
-			return -EFAULT;
-		return sys_semctl (first, second, third, fourth);
-	}
-
-	case MSGSND:
-		return sys_msgsnd (first, (struct msgbuf __user *) ptr, 
-				   second, third);
-	case MSGRCV:
-		switch (version) {
-		case 0: {
-			struct ipc_kludge tmp;
-			if (!ptr)
-				return -EINVAL;
-			
-			if (copy_from_user(&tmp,
-					   (struct ipc_kludge __user *) ptr, 
-					   sizeof (tmp)))
-				return -EFAULT;
-			return sys_msgrcv (first, tmp.msgp, second,
-					   tmp.msgtyp, third);
-		}
-		default:
-			return sys_msgrcv (first,
-					   (struct msgbuf __user *) ptr,
-					   second, fifth, third);
-		}
-	case MSGGET:
-		return sys_msgget ((key_t) first, second);
-	case MSGCTL:
-		return sys_msgctl (first, second, (struct msqid_ds __user *) ptr);
-
-	case SHMAT: {
-                ulong raddr;
-                ret = do_shmat (first, (char __user *) ptr, second, &raddr);
-                if (ret)
-                        return ret;
-                return put_user (raddr, (ulong __user *) third);
-        }
-	case SHMDT: 
-		return sys_shmdt ((char __user *)ptr);
-	case SHMGET:
-		return sys_shmget (first, second, third);
-	case SHMCTL:
-		return sys_shmctl (first, second,
-				   (struct shmid_ds __user *) ptr);
-	default:
-		return -ENOSYS;
-	}
-}
diff --git a/arch/frv/include/asm/dma-mapping.h b/arch/frv/include/asm/dma-mapping.h
index b2898877c07b..6af5d83e2fb2 100644
--- a/arch/frv/include/asm/dma-mapping.h
+++ b/arch/frv/include/asm/dma-mapping.h
@@ -7,6 +7,11 @@
 #include <asm/scatterlist.h>
 #include <asm/io.h>
 
+/*
+ * See Documentation/DMA-API.txt for the description of how the
+ * following DMA API should work.
+ */
+
 #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
 #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
 
@@ -16,24 +21,9 @@ extern unsigned long __nongprelbss dma_coherent_mem_end;
 void *dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t gfp);
 void dma_free_coherent(struct device *dev, size_t size, void *vaddr, dma_addr_t dma_handle);
 
-/*
- * Map a single buffer of the indicated size for DMA in streaming mode.
- * The 32-bit bus address to use is returned.
- *
- * Once the device is given the dma address, the device owns this memory
- * until either pci_unmap_single or pci_dma_sync_single is performed.
- */
 extern dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
 				 enum dma_data_direction direction);
 
-/*
- * Unmap a single streaming mode DMA translation.  The dma_addr and size
- * must match what was provided for in a previous pci_map_single call.  All
- * other usages are undefined.
- *
- * After this call, reads by the cpu to the buffer are guarenteed to see
- * whatever the device wrote there.
- */
 static inline
 void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 		      enum dma_data_direction direction)
@@ -41,30 +31,9 @@ void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 	BUG_ON(direction == DMA_NONE);
 }
 
-/*
- * Map a set of buffers described by scatterlist in streaming
- * mode for DMA.  This is the scather-gather version of the
- * above pci_map_single interface.  Here the scatter gather list
- * elements are each tagged with the appropriate dma address
- * and length.  They are obtained via sg_dma_{address,length}(SG).
- *
- * NOTE: An implementation may be able to use a smaller number of
- *       DMA address/length pairs than there are SG table elements.
- *       (for example via virtual mapping capabilities)
- *       The routine returns the number of addr/length pairs actually
- *       used, at most nents.
- *
- * Device ownership issues as mentioned above for pci_map_single are
- * the same here.
- */
 extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
 		      enum dma_data_direction direction);
 
-/*
- * Unmap a set of streaming mode DMA translations.
- * Again, cpu read rules concerning calls here are the same as for
- * pci_unmap_single() above.
- */
 static inline
 void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
 	     enum dma_data_direction direction)
diff --git a/arch/frv/include/asm/pci.h b/arch/frv/include/asm/pci.h
index 8c7260a3cd41..0d5997909850 100644
--- a/arch/frv/include/asm/pci.h
+++ b/arch/frv/include/asm/pci.h
@@ -43,14 +43,6 @@ extern void pci_free_consistent(struct pci_dev *hwdev, size_t size,
 /* Return the index of the PCI controller for device PDEV. */
 #define pci_controller_num(PDEV)	(0)
 
-/* pci_unmap_{page,single} is a nop so... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
-#define pci_unmap_addr(PTR, ADDR_NAME)		(0)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	do { } while (0)
-#define pci_unmap_len(PTR, LEN_NAME)		(0)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0)
-
 #ifdef CONFIG_PCI
 static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 					enum pci_dma_burst_strategy *strat,
diff --git a/arch/frv/include/asm/ptrace.h b/arch/frv/include/asm/ptrace.h
index a54b535c9e49..6bfad4cf1907 100644
--- a/arch/frv/include/asm/ptrace.h
+++ b/arch/frv/include/asm/ptrace.h
@@ -84,8 +84,6 @@ extern void show_regs(struct pt_regs *);
 #define task_pt_regs(task) ((task)->thread.frame0)
 
 #define arch_has_single_step()	(1)
-extern void user_enable_single_step(struct task_struct *);
-extern void user_disable_single_step(struct task_struct *);
 
 #endif /* !__ASSEMBLY__ */
 #endif /* __KERNEL__ */
diff --git a/arch/frv/include/asm/unistd.h b/arch/frv/include/asm/unistd.h
index be6ef0f5cd42..b28da499e22a 100644
--- a/arch/frv/include/asm/unistd.h
+++ b/arch/frv/include/asm/unistd.h
@@ -354,6 +354,7 @@
 #define __ARCH_WANT_STAT64
 #define __ARCH_WANT_SYS_ALARM
 /* #define __ARCH_WANT_SYS_GETHOSTNAME */
+#define __ARCH_WANT_SYS_IPC
 #define __ARCH_WANT_SYS_PAUSE
 /* #define __ARCH_WANT_SYS_SGETMASK */
 /* #define __ARCH_WANT_SYS_SIGNAL */
diff --git a/arch/frv/kernel/sys_frv.c b/arch/frv/kernel/sys_frv.c
index 1d3d4c9e2521..9c4980825bbb 100644
--- a/arch/frv/kernel/sys_frv.c
+++ b/arch/frv/kernel/sys_frv.c
@@ -42,92 +42,3 @@ asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
 	return sys_mmap_pgoff(addr, len, prot, flags, fd,
 			      pgoff >> (PAGE_SHIFT - 12));
 }
-
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly.
- */
-asmlinkage long sys_ipc(unsigned long call,
-			unsigned long first,
-			unsigned long second,
-			unsigned long third,
-			void __user *ptr,
-			unsigned long fifth)
-{
-	int version, ret;
-
-	version = call >> 16; /* hack for backward compatibility */
-	call &= 0xffff;
-
-	switch (call) {
-	case SEMOP:
-		return sys_semtimedop(first, (struct sembuf __user *)ptr, second, NULL);
-	case SEMTIMEDOP:
-		return sys_semtimedop(first, (struct sembuf __user *)ptr, second,
-				      (const struct timespec __user *)fifth);
-
-	case SEMGET:
-		return sys_semget (first, second, third);
-	case SEMCTL: {
-		union semun fourth;
-		if (!ptr)
-			return -EINVAL;
-		if (get_user(fourth.__pad, (void * __user *) ptr))
-			return -EFAULT;
-		return sys_semctl (first, second, third, fourth);
-	}
-
-	case MSGSND:
-		return sys_msgsnd (first, (struct msgbuf __user *) ptr,
-				   second, third);
-	case MSGRCV:
-		switch (version) {
-		case 0: {
-			struct ipc_kludge tmp;
-			if (!ptr)
-				return -EINVAL;
-
-			if (copy_from_user(&tmp,
-					   (struct ipc_kludge __user *) ptr,
-					   sizeof (tmp)))
-				return -EFAULT;
-			return sys_msgrcv (first, tmp.msgp, second,
-					   tmp.msgtyp, third);
-		}
-		default:
-			return sys_msgrcv (first,
-					   (struct msgbuf __user *) ptr,
-					   second, fifth, third);
-		}
-	case MSGGET:
-		return sys_msgget ((key_t) first, second);
-	case MSGCTL:
-		return sys_msgctl (first, second, (struct msqid_ds __user *) ptr);
-
-	case SHMAT:
-		switch (version) {
-		default: {
-			ulong raddr;
-			ret = do_shmat (first, (char __user *) ptr, second, &raddr);
-			if (ret)
-				return ret;
-			return put_user (raddr, (ulong __user *) third);
-		}
-		case 1:	/* iBCS2 emulator entry point */
-			if (!segment_eq(get_fs(), get_ds()))
-				return -EINVAL;
-			/* The "(ulong *) third" is valid _only_ because of the kernel segment thing */
-			return do_shmat (first, (char __user *) ptr, second, (ulong *) third);
-		}
-	case SHMDT:
-		return sys_shmdt ((char __user *)ptr);
-	case SHMGET:
-		return sys_shmget (first, second, third);
-	case SHMCTL:
-		return sys_shmctl (first, second,
-				   (struct shmid_ds __user *) ptr);
-	default:
-		return -ENOSYS;
-	}
-}
diff --git a/arch/frv/mb93090-mb00/pci-dma-nommu.c b/arch/frv/mb93090-mb00/pci-dma-nommu.c
index 4e1ba0b15443..e47857f889b6 100644
--- a/arch/frv/mb93090-mb00/pci-dma-nommu.c
+++ b/arch/frv/mb93090-mb00/pci-dma-nommu.c
@@ -106,13 +106,6 @@ void dma_free_coherent(struct device *hwdev, size_t size, void *vaddr, dma_addr_
 
 EXPORT_SYMBOL(dma_free_coherent);
 
-/*
- * Map a single buffer of the indicated size for DMA in streaming mode.
- * The 32-bit bus address to use is returned.
- *
- * Once the device is given the dma address, the device owns this memory
- * until either dma_unmap_single or pci_dma_sync_single is performed.
- */
 dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
 			  enum dma_data_direction direction)
 {
@@ -125,22 +118,6 @@ dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
 
 EXPORT_SYMBOL(dma_map_single);
 
-/*
- * Map a set of buffers described by scatterlist in streaming
- * mode for DMA.  This is the scather-gather version of the
- * above dma_map_single interface.  Here the scatter gather list
- * elements are each tagged with the appropriate dma address
- * and length.  They are obtained via sg_dma_{address,length}(SG).
- *
- * NOTE: An implementation may be able to use a smaller number of
- *       DMA address/length pairs than there are SG table elements.
- *       (for example via virtual mapping capabilities)
- *       The routine returns the number of addr/length pairs actually
- *       used, at most nents.
- *
- * Device ownership issues as mentioned above for dma_map_single are
- * the same here.
- */
 int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
 	       enum dma_data_direction direction)
 {
@@ -157,13 +134,6 @@ int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
 
 EXPORT_SYMBOL(dma_map_sg);
 
-/*
- * Map a single page of the indicated size for DMA in streaming mode.
- * The 32-bit bus address to use is returned.
- *
- * Device ownership issues as mentioned above for dma_map_single are
- * the same here.
- */
 dma_addr_t dma_map_page(struct device *dev, struct page *page, unsigned long offset,
 			size_t size, enum dma_data_direction direction)
 {
diff --git a/arch/frv/mb93090-mb00/pci-dma.c b/arch/frv/mb93090-mb00/pci-dma.c
index 45954f0813dc..2c912e805162 100644
--- a/arch/frv/mb93090-mb00/pci-dma.c
+++ b/arch/frv/mb93090-mb00/pci-dma.c
@@ -38,13 +38,6 @@ void dma_free_coherent(struct device *hwdev, size_t size, void *vaddr, dma_addr_
 
 EXPORT_SYMBOL(dma_free_coherent);
 
-/*
- * Map a single buffer of the indicated size for DMA in streaming mode.
- * The 32-bit bus address to use is returned.
- *
- * Once the device is given the dma address, the device owns this memory
- * until either pci_unmap_single or pci_dma_sync_single is performed.
- */
 dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
 			  enum dma_data_direction direction)
 {
@@ -57,22 +50,6 @@ dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
 
 EXPORT_SYMBOL(dma_map_single);
 
-/*
- * Map a set of buffers described by scatterlist in streaming
- * mode for DMA.  This is the scather-gather version of the
- * above dma_map_single interface.  Here the scatter gather list
- * elements are each tagged with the appropriate dma address
- * and length.  They are obtained via sg_dma_{address,length}(SG).
- *
- * NOTE: An implementation may be able to use a smaller number of
- *       DMA address/length pairs than there are SG table elements.
- *       (for example via virtual mapping capabilities)
- *       The routine returns the number of addr/length pairs actually
- *       used, at most nents.
- *
- * Device ownership issues as mentioned above for dma_map_single are
- * the same here.
- */
 int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
 	       enum dma_data_direction direction)
 {
@@ -103,13 +80,6 @@ int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
 
 EXPORT_SYMBOL(dma_map_sg);
 
-/*
- * Map a single page of the indicated size for DMA in streaming mode.
- * The 32-bit bus address to use is returned.
- *
- * Device ownership issues as mentioned above for dma_map_single are
- * the same here.
- */
 dma_addr_t dma_map_page(struct device *dev, struct page *page, unsigned long offset,
 			size_t size, enum dma_data_direction direction)
 {
diff --git a/arch/h8300/include/asm/io.h b/arch/h8300/include/asm/io.h
index 33e842f3284b..c1a8df22080f 100644
--- a/arch/h8300/include/asm/io.h
+++ b/arch/h8300/include/asm/io.h
@@ -25,7 +25,7 @@
  * memory location directly.
  */
 /* ++roman: The assignments to temp. vars avoid that gcc sometimes generates
- * two accesses to memory, which may be undesireable for some devices.
+ * two accesses to memory, which may be undesirable for some devices.
  */
 
 /*
diff --git a/arch/h8300/include/asm/ptrace.h b/arch/h8300/include/asm/ptrace.h
index c2e05e4b512e..d866c0efba87 100644
--- a/arch/h8300/include/asm/ptrace.h
+++ b/arch/h8300/include/asm/ptrace.h
@@ -55,6 +55,8 @@ struct pt_regs {
 /* Find the stack offset for a register, relative to thread.esp0. */
 #define PT_REG(reg)	((long)&((struct pt_regs *)0)->reg)
 
+#define arch_has_single_step()	(1)
+
 #define user_mode(regs) (!((regs)->ccr & PS_S))
 #define instruction_pointer(regs) ((regs)->pc)
 #define profile_pc(regs) instruction_pointer(regs)
diff --git a/arch/h8300/include/asm/unistd.h b/arch/h8300/include/asm/unistd.h
index 99f3c3561ecb..50f2c5a36591 100644
--- a/arch/h8300/include/asm/unistd.h
+++ b/arch/h8300/include/asm/unistd.h
@@ -336,6 +336,7 @@
 #define __ARCH_WANT_STAT64
 #define __ARCH_WANT_SYS_ALARM
 #define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_IPC
 #define __ARCH_WANT_SYS_PAUSE
 #define __ARCH_WANT_SYS_SGETMASK
 #define __ARCH_WANT_SYS_SIGNAL
@@ -348,6 +349,8 @@
 #define __ARCH_WANT_SYS_LLSEEK
 #define __ARCH_WANT_SYS_NICE
 #define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLD_MMAP
+#define __ARCH_WANT_SYS_OLD_SELECT
 #define __ARCH_WANT_SYS_OLDUMOUNT
 #define __ARCH_WANT_SYS_SIGPENDING
 #define __ARCH_WANT_SYS_SIGPROCMASK
diff --git a/arch/h8300/kernel/ptrace.c b/arch/h8300/kernel/ptrace.c
index d32bbf02fc48..df114122ebdf 100644
--- a/arch/h8300/kernel/ptrace.c
+++ b/arch/h8300/kernel/ptrace.c
@@ -34,25 +34,20 @@
 /* cpu depend functions */
 extern long h8300_get_reg(struct task_struct *task, int regno);
 extern int  h8300_put_reg(struct task_struct *task, int regno, unsigned long data);
-extern void h8300_disable_trace(struct task_struct *child);
-extern void h8300_enable_trace(struct task_struct *child);
+
+
+void user_disable_single_step(struct task_struct *child)
+{
+}
 
 /*
  * does not yet catch signals sent when the child dies.
  * in exit.c or in signal.c.
  */
 
-inline
-static int read_long(struct task_struct * tsk, unsigned long addr,
-	unsigned long * result)
-{
-	*result = *(unsigned long *)addr;
-	return 0;
-}
-
 void ptrace_disable(struct task_struct *child)
 {
-	h8300_disable_trace(child);
+	user_disable_single_step(child);
 }
 
 long arch_ptrace(struct task_struct *child, long request, long addr, long data)
@@ -60,17 +55,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	int ret;
 
 	switch (request) {
-		case PTRACE_PEEKTEXT: /* read word at location addr. */ 
-		case PTRACE_PEEKDATA: {
-			unsigned long tmp;
-
-			ret = read_long(child, addr, &tmp);
-			if (ret < 0)
-				break ;
-			ret = put_user(tmp, (unsigned long *) data);
-			break ;
-		}
-
 	/* read the word at location addr in the USER area. */
 		case PTRACE_PEEKUSR: {
 			unsigned long tmp = 0;
@@ -109,11 +93,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		}
 
       /* when I and D space are separate, this will have to be fixed. */
-		case PTRACE_POKETEXT: /* write the word at location addr. */
-		case PTRACE_POKEDATA:
-			ret = generic_ptrace_pokedata(child, addr, data);
-			break;
-
 		case PTRACE_POKEUSR: /* write the word at location addr in the USER area */
 			if ((addr & 3) || addr < 0 || addr >= sizeof(struct user)) {
 				ret = -EIO;
@@ -131,53 +110,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 			}
 			ret = -EIO;
 			break ;
-		case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
-		case PTRACE_CONT: { /* restart after signal. */
-			ret = -EIO;
-			if (!valid_signal(data))
-				break ;
-			if (request == PTRACE_SYSCALL)
-				set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-			else
-				clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-			child->exit_code = data;
-			wake_up_process(child);
-			/* make sure the single step bit is not set. */
-			h8300_disable_trace(child);
-			ret = 0;
-		}
-
-/*
- * make the child exit.  Best I can do is send it a sigkill. 
- * perhaps it should be put in the status that it wants to 
- * exit.
- */
-		case PTRACE_KILL: {
-
-			ret = 0;
-			if (child->exit_state == EXIT_ZOMBIE) /* already dead */
-				break;
-			child->exit_code = SIGKILL;
-			h8300_disable_trace(child);
-			wake_up_process(child);
-			break;
-		}
-
-		case PTRACE_SINGLESTEP: {  /* set the trap flag. */
-			ret = -EIO;
-			if (!valid_signal(data))
-				break;
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-			child->exit_code = data;
-			h8300_enable_trace(child);
-			wake_up_process(child);
-			ret = 0;
-			break;
-		}
-
-		case PTRACE_DETACH:	/* detach a process that was attached. */
-			ret = ptrace_detach(child, data);
-			break;
 
 		case PTRACE_GETREGS: { /* Get all gp regs from the child. */
 		  	int i;
@@ -210,7 +142,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		}
 
 		default:
-			ret = -EIO;
+			ret = ptrace_request(child, request, addr, data);
 			break;
 	}
 	return ret;
diff --git a/arch/h8300/kernel/sys_h8300.c b/arch/h8300/kernel/sys_h8300.c
index b5969db0ca10..f9b3f44da69f 100644
--- a/arch/h8300/kernel/sys_h8300.c
+++ b/arch/h8300/kernel/sys_h8300.c
@@ -26,144 +26,6 @@
 #include <asm/traps.h>
 #include <asm/unistd.h>
 
-/*
- * Perform the select(nd, in, out, ex, tv) and mmap() system
- * calls. Linux/m68k cloned Linux/i386, which didn't use to be able to
- * handle more than 4 system call parameters, so these system calls
- * used a memory block for parameter passing..
- */
-
-struct mmap_arg_struct {
-	unsigned long addr;
-	unsigned long len;
-	unsigned long prot;
-	unsigned long flags;
-	unsigned long fd;
-	unsigned long offset;
-};
-
-asmlinkage int old_mmap(struct mmap_arg_struct *arg)
-{
-	struct mmap_arg_struct a;
-	int error = -EFAULT;
-
-	if (copy_from_user(&a, arg, sizeof(a)))
-		goto out;
-
-	error = -EINVAL;
-	if (a.offset & ~PAGE_MASK)
-		goto out;
-
-	error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd,
-			       a.offset >> PAGE_SHIFT);
-out:
-	return error;
-}
-
-struct sel_arg_struct {
-	unsigned long n;
-	fd_set *inp, *outp, *exp;
-	struct timeval *tvp;
-};
-
-asmlinkage int old_select(struct sel_arg_struct *arg)
-{
-	struct sel_arg_struct a;
-
-	if (copy_from_user(&a, arg, sizeof(a)))
-		return -EFAULT;
-	/* sys_select() does the appropriate kernel locking */
-	return sys_select(a.n, a.inp, a.outp, a.exp, a.tvp);
-}
-
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly.
- */
-asmlinkage int sys_ipc (uint call, int first, int second,
-			int third, void *ptr, long fifth)
-{
-	int version, ret;
-
-	version = call >> 16; /* hack for backward compatibility */
-	call &= 0xffff;
-
-	if (call <= SEMCTL)
-		switch (call) {
-		case SEMOP:
-			return sys_semop (first, (struct sembuf *)ptr, second);
-		case SEMGET:
-			return sys_semget (first, second, third);
-		case SEMCTL: {
-			union semun fourth;
-			if (!ptr)
-				return -EINVAL;
-			if (get_user(fourth.__pad, (void **) ptr))
-				return -EFAULT;
-			return sys_semctl (first, second, third, fourth);
-			}
-		default:
-			return -EINVAL;
-		}
-	if (call <= MSGCTL) 
-		switch (call) {
-		case MSGSND:
-			return sys_msgsnd (first, (struct msgbuf *) ptr, 
-					  second, third);
-		case MSGRCV:
-			switch (version) {
-			case 0: {
-				struct ipc_kludge tmp;
-				if (!ptr)
-					return -EINVAL;
-				if (copy_from_user (&tmp,
-						    (struct ipc_kludge *)ptr,
-						    sizeof (tmp)))
-					return -EFAULT;
-				return sys_msgrcv (first, tmp.msgp, second,
-						   tmp.msgtyp, third);
-				}
-			default:
-				return sys_msgrcv (first,
-						   (struct msgbuf *) ptr,
-						   second, fifth, third);
-			}
-		case MSGGET:
-			return sys_msgget ((key_t) first, second);
-		case MSGCTL:
-			return sys_msgctl (first, second,
-					   (struct msqid_ds *) ptr);
-		default:
-			return -EINVAL;
-		}
-	if (call <= SHMCTL) 
-		switch (call) {
-		case SHMAT:
-			switch (version) {
-			default: {
-				ulong raddr;
-				ret = do_shmat (first, (char *) ptr,
-						 second, &raddr);
-				if (ret)
-					return ret;
-				return put_user (raddr, (ulong *) third);
-			}
-			}
-		case SHMDT: 
-			return sys_shmdt ((char *)ptr);
-		case SHMGET:
-			return sys_shmget (first, second, third);
-		case SHMCTL:
-			return sys_shmctl (first, second,
-					   (struct shmid_ds *) ptr);
-		default:
-			return -EINVAL;
-		}
-
-	return -EINVAL;
-}
-
 /* sys_cacheflush -- no support.  */
 asmlinkage int
 sys_cacheflush (unsigned long addr, int scope, int cache, unsigned long len)
diff --git a/arch/h8300/kernel/syscalls.S b/arch/h8300/kernel/syscalls.S
index 2d69881eda6a..faefaff7d43d 100644
--- a/arch/h8300/kernel/syscalls.S
+++ b/arch/h8300/kernel/syscalls.S
@@ -96,7 +96,7 @@ SYMBOL_NAME_LABEL(sys_call_table)
 	.long SYMBOL_NAME(sys_settimeofday)
 	.long SYMBOL_NAME(sys_getgroups16)	/* 80 */
 	.long SYMBOL_NAME(sys_setgroups16)
-	.long SYMBOL_NAME(old_select)
+	.long SYMBOL_NAME(sys_old_select)
 	.long SYMBOL_NAME(sys_symlink)
 	.long SYMBOL_NAME(sys_lstat)
 	.long SYMBOL_NAME(sys_readlink)		/* 85 */
@@ -104,7 +104,7 @@ SYMBOL_NAME_LABEL(sys_call_table)
 	.long SYMBOL_NAME(sys_swapon)
 	.long SYMBOL_NAME(sys_reboot)
 	.long SYMBOL_NAME(sys_old_readdir)
-	.long SYMBOL_NAME(old_mmap)		/* 90 */
+	.long SYMBOL_NAME(sys_old_mmap)		/* 90 */
 	.long SYMBOL_NAME(sys_munmap)
 	.long SYMBOL_NAME(sys_truncate)
 	.long SYMBOL_NAME(sys_ftruncate)
diff --git a/arch/h8300/platform/h8300h/ptrace_h8300h.c b/arch/h8300/platform/h8300h/ptrace_h8300h.c
index 746b1ae672a1..4f1ed0279633 100644
--- a/arch/h8300/platform/h8300h/ptrace_h8300h.c
+++ b/arch/h8300/platform/h8300h/ptrace_h8300h.c
@@ -60,7 +60,7 @@ int h8300_put_reg(struct task_struct *task, int regno, unsigned long data)
 }
 
 /* disable singlestep */
-void h8300_disable_trace(struct task_struct *child)
+void user_disable_single_step(struct task_struct *child)
 {
 	if((long)child->thread.breakinfo.addr != -1L) {
 		*child->thread.breakinfo.addr = child->thread.breakinfo.inst;
@@ -264,7 +264,7 @@ static unsigned short *getnextpc(struct task_struct *child, unsigned short *pc)
 
 /* Set breakpoint(s) to simulate a single step from the current PC.  */
 
-void h8300_enable_trace(struct task_struct *child)
+void user_enable_single_step(struct task_struct *child)
 {
 	unsigned short *nextpc;
 	nextpc = getnextpc(child,(unsigned short *)h8300_get_reg(child, PT_PC));
@@ -276,7 +276,7 @@ void h8300_enable_trace(struct task_struct *child)
 asmlinkage void trace_trap(unsigned long bp)
 {
 	if ((unsigned long)current->thread.breakinfo.addr == bp) {
-		h8300_disable_trace(current);
+		user_disable_single_step(current);
 		force_sig(SIGTRAP,current);
 	} else
 	        force_sig(SIGILL,current);
diff --git a/arch/h8300/platform/h8s/ptrace_h8s.c b/arch/h8300/platform/h8s/ptrace_h8s.c
index e8cd46f9255c..c058ab1a8495 100644
--- a/arch/h8300/platform/h8s/ptrace_h8s.c
+++ b/arch/h8300/platform/h8s/ptrace_h8s.c
@@ -65,13 +65,13 @@ int h8300_put_reg(struct task_struct *task, int regno, unsigned long data)
 }
 
 /* disable singlestep */
-void h8300_disable_trace(struct task_struct *child)
+void user_disable_single_step(struct task_struct *child)
 {
 	*(unsigned short *)(child->thread.esp0 + h8300_register_offset[PT_EXR]) &= ~EXR_TRACE;
 }
 
 /* enable singlestep */
-void h8300_enable_trace(struct task_struct *child)
+void user_enable_single_step(struct task_struct *child)
 {
 	*(unsigned short *)(child->thread.esp0 + h8300_register_offset[PT_EXR]) |= EXR_TRACE;
 }
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 9a50d7dd2a0b..4d4f4188cdf1 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -53,6 +53,9 @@ config MMU
 	bool
 	default y
 
+config NEED_DMA_MAP_STATE
+	def_bool y
+
 config SWIOTLB
        bool
 
diff --git a/arch/ia64/include/asm/compat.h b/arch/ia64/include/asm/compat.h
index dfcf75b8426d..f90edc85b509 100644
--- a/arch/ia64/include/asm/compat.h
+++ b/arch/ia64/include/asm/compat.h
@@ -5,7 +5,8 @@
  */
 #include <linux/types.h>
 
-#define COMPAT_USER_HZ	100
+#define COMPAT_USER_HZ		100
+#define COMPAT_UTS_MACHINE	"i686\0\0\0"
 
 typedef u32		compat_size_t;
 typedef s32		compat_ssize_t;
diff --git a/arch/ia64/include/asm/pci.h b/arch/ia64/include/asm/pci.h
index 55281aabe5f2..73b5f785e70c 100644
--- a/arch/ia64/include/asm/pci.h
+++ b/arch/ia64/include/asm/pci.h
@@ -56,20 +56,6 @@ pcibios_penalize_isa_irq (int irq, int active)
 
 #include <asm-generic/pci-dma-compat.h>
 
-/* pci_unmap_{single,page} is not a nop, thus... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
-	dma_addr_t ADDR_NAME;
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
-	__u32 LEN_NAME;
-#define pci_unmap_addr(PTR, ADDR_NAME)			\
-	((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
-	(((PTR)->ADDR_NAME) = (VAL))
-#define pci_unmap_len(PTR, LEN_NAME)			\
-	((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
-	(((PTR)->LEN_NAME) = (VAL))
-
 #ifdef CONFIG_PCI
 static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 					enum pci_dma_burst_strategy *strat,
diff --git a/arch/ia64/include/asm/ptrace.h b/arch/ia64/include/asm/ptrace.h
index 14055c636adf..7ae9c3f15a1c 100644
--- a/arch/ia64/include/asm/ptrace.h
+++ b/arch/ia64/include/asm/ptrace.h
@@ -319,11 +319,7 @@ static inline unsigned long user_stack_pointer(struct pt_regs *regs)
 	ptrace_attach_sync_user_rbs(child)
 
   #define arch_has_single_step()  (1)
-  extern void user_enable_single_step(struct task_struct *);
-  extern void user_disable_single_step(struct task_struct *);
-
   #define arch_has_block_step()   (1)
-  extern void user_enable_block_step(struct task_struct *);
 
 #endif /* !__KERNEL__ */
 
diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
index a7ca07f3754e..f1c9f70b4e45 100644
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -44,6 +44,7 @@
 #include <linux/efi.h>
 #include <linux/mmzone.h>
 #include <linux/nodemask.h>
+#include <acpi/processor.h>
 #include <asm/io.h>
 #include <asm/iosapic.h>
 #include <asm/machvec.h>
@@ -907,6 +908,8 @@ int acpi_map_lsapic(acpi_handle handle, int *pcpu)
 	cpu_set(cpu, cpu_present_map);
 	ia64_cpu_to_sapicid[cpu] = physid;
 
+	acpi_processor_set_pdc(handle);
+
 	*pcpu = cpu;
 	return (0);
 }
diff --git a/arch/ia64/kernel/topology.c b/arch/ia64/kernel/topology.c
index 8f060352e129..b3a5818088d9 100644
--- a/arch/ia64/kernel/topology.c
+++ b/arch/ia64/kernel/topology.c
@@ -282,7 +282,7 @@ static ssize_t cache_show(struct kobject * kobj, struct attribute * attr, char *
 	return ret;
 }
 
-static struct sysfs_ops cache_sysfs_ops = {
+static const struct sysfs_ops cache_sysfs_ops = {
 	.show   = cache_show
 };
 
diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c
index e456f062f241..d00dfc180021 100644
--- a/arch/ia64/sn/kernel/setup.c
+++ b/arch/ia64/sn/kernel/setup.c
@@ -241,7 +241,7 @@ static void __cpuinit sn_check_for_wars(void)
  * Note:  This stuff is duped here because Altix requires the PCDP to
  * locate a usable VGA device due to lack of proper ACPI support.  Structures
  * could be used from drivers/firmware/pcdp.h, but it was decided that moving
- * this file to a more public location just for Altix use was undesireable.
+ * this file to a more public location just for Altix use was undesirable.
  */
 
 struct hcdp_uart_desc {
diff --git a/arch/m32r/include/asm/ptrace.h b/arch/m32r/include/asm/ptrace.h
index a0755b982028..840a1231edeb 100644
--- a/arch/m32r/include/asm/ptrace.h
+++ b/arch/m32r/include/asm/ptrace.h
@@ -120,6 +120,8 @@ struct pt_regs {
 
 #include <asm/m32r.h>		/* M32R_PSW_BSM, M32R_PSW_BPM */
 
+#define arch_has_single_step() (1)
+
 struct task_struct;
 extern void init_debug_traps(struct task_struct *);
 #define arch_ptrace_attach(child) \
diff --git a/arch/m32r/include/asm/unistd.h b/arch/m32r/include/asm/unistd.h
index cf701c933249..76125777483c 100644
--- a/arch/m32r/include/asm/unistd.h
+++ b/arch/m32r/include/asm/unistd.h
@@ -339,6 +339,7 @@
 #define __ARCH_WANT_STAT64
 #define __ARCH_WANT_SYS_ALARM
 #define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_IPC
 #define __ARCH_WANT_SYS_PAUSE
 #define __ARCH_WANT_SYS_TIME
 #define __ARCH_WANT_SYS_UTIME
diff --git a/arch/m32r/kernel/ptrace.c b/arch/m32r/kernel/ptrace.c
index 98682bba0ed9..e555091eb97c 100644
--- a/arch/m32r/kernel/ptrace.c
+++ b/arch/m32r/kernel/ptrace.c
@@ -580,6 +580,35 @@ init_debug_traps(struct task_struct *child)
 	}
 }
 
+void user_enable_single_step(struct task_struct *child)
+{
+	unsigned long next_pc;
+	unsigned long pc, insn;
+
+	clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+
+	/* Compute next pc.  */
+	pc = get_stack_long(child, PT_BPC);
+
+	if (access_process_vm(child, pc&~3, &insn, sizeof(insn), 0)
+	    != sizeof(insn))
+		break;
+
+	compute_next_pc(insn, pc, &next_pc, child);
+	if (next_pc & 0x80000000)
+		break;
+
+	if (embed_debug_trap(child, next_pc))
+		break;
+
+	invalidate_cache();
+}
+
+void user_disable_single_step(struct task_struct *child)
+{
+	unregister_all_debug_traps(child);
+	invalidate_cache();
+}
 
 /*
  * Called by kernel/ptrace.c when detaching..
@@ -630,74 +659,6 @@ arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		ret = ptrace_write_user(child, addr, data);
 		break;
 
-	/*
-	 * continue/restart and stop at next (return from) syscall
-	 */
-	case PTRACE_SYSCALL:
-	case PTRACE_CONT:
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		if (request == PTRACE_SYSCALL)
-			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		else
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		child->exit_code = data;
-		wake_up_process(child);
-		ret = 0;
-		break;
-
-	/*
-	 * make the child exit.  Best I can do is send it a sigkill.
-	 * perhaps it should be put in the status that it wants to
-	 * exit.
-	 */
-	case PTRACE_KILL: {
-		ret = 0;
-		unregister_all_debug_traps(child);
-		invalidate_cache();
-		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
-			break;
-		child->exit_code = SIGKILL;
-		wake_up_process(child);
-		break;
-	}
-
-	/*
-	 * execute single instruction.
-	 */
-	case PTRACE_SINGLESTEP: {
-		unsigned long next_pc;
-		unsigned long pc, insn;
-
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-
-		/* Compute next pc.  */
-		pc = get_stack_long(child, PT_BPC);
-
-		if (access_process_vm(child, pc&~3, &insn, sizeof(insn), 0)
-		    != sizeof(insn))
-			break;
-
-		compute_next_pc(insn, pc, &next_pc, child);
-		if (next_pc & 0x80000000)
-			break;
-
-		if (embed_debug_trap(child, next_pc))
-			break;
-
-		invalidate_cache();
-		child->exit_code = data;
-
-		/* give it a chance to run. */
-		wake_up_process(child);
-		ret = 0;
-		break;
-	}
-
 	case PTRACE_GETREGS:
 		ret = ptrace_getregs(child, (void __user *)data);
 		break;
diff --git a/arch/m32r/kernel/sys_m32r.c b/arch/m32r/kernel/sys_m32r.c
index d3c865c5a6ba..0a00f467edfa 100644
--- a/arch/m32r/kernel/sys_m32r.c
+++ b/arch/m32r/kernel/sys_m32r.c
@@ -76,98 +76,6 @@ asmlinkage int sys_tas(int __user *addr)
 	return oldval;
 }
 
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly.
- */
-asmlinkage int sys_ipc(uint call, int first, int second,
-		       int third, void __user *ptr, long fifth)
-{
-	int version, ret;
-
-	version = call >> 16; /* hack for backward compatibility */
-	call &= 0xffff;
-
-	switch (call) {
-	case SEMOP:
-		return sys_semtimedop(first, (struct sembuf __user *)ptr,
-				      second, NULL);
-	case SEMTIMEDOP:
-		return sys_semtimedop(first, (struct sembuf __user *)ptr,
-				      second, (const struct timespec __user *)fifth);
-	case SEMGET:
-		return sys_semget (first, second, third);
-	case SEMCTL: {
-		union semun fourth;
-		if (!ptr)
-			return -EINVAL;
-		if (get_user(fourth.__pad, (void __user * __user *) ptr))
-			return -EFAULT;
-		return sys_semctl (first, second, third, fourth);
-		}
-
-	case MSGSND:
-		return sys_msgsnd (first, (struct msgbuf __user *) ptr,
-				   second, third);
-	case MSGRCV:
-		switch (version) {
-		case 0: {
-			struct ipc_kludge tmp;
-			if (!ptr)
-				return -EINVAL;
-
-			if (copy_from_user(&tmp,
-					   (struct ipc_kludge __user *) ptr,
-					   sizeof (tmp)))
-				return -EFAULT;
-			return sys_msgrcv (first, tmp.msgp, second,
-					   tmp.msgtyp, third);
-			}
-		default:
-			return sys_msgrcv (first,
-					   (struct msgbuf __user *) ptr,
-					   second, fifth, third);
-		}
-	case MSGGET:
-		return sys_msgget ((key_t) first, second);
-	case MSGCTL:
-		return sys_msgctl (first, second,
-				   (struct msqid_ds __user *) ptr);
-	case SHMAT: {
-		ulong raddr;
-
-		if (!access_ok(VERIFY_WRITE, (ulong __user *) third,
-				      sizeof(ulong)))
-			return -EFAULT;
-		ret = do_shmat (first, (char __user *) ptr, second, &raddr);
-		if (ret)
-			return ret;
-		return put_user (raddr, (ulong __user *) third);
-		}
-	case SHMDT:
-		return sys_shmdt ((char __user *)ptr);
-	case SHMGET:
-		return sys_shmget (first, second, third);
-	case SHMCTL:
-		return sys_shmctl (first, second,
-				   (struct shmid_ds __user *) ptr);
-	default:
-		return -ENOSYS;
-	}
-}
-
-asmlinkage int sys_uname(struct old_utsname __user * name)
-{
-	int err;
-	if (!name)
-		return -EFAULT;
-	down_read(&uts_sem);
-	err = copy_to_user(name, utsname(), sizeof (*name));
-	up_read(&uts_sem);
-	return err?-EFAULT:0;
-}
-
 asmlinkage int sys_cacheflush(void *addr, int bytes, int cache)
 {
 	/* This should flush more selectively ...  */
diff --git a/arch/m68k/atari/atakeyb.c b/arch/m68k/atari/atakeyb.c
index 4add96d13b19..5890897d28bf 100644
--- a/arch/m68k/atari/atakeyb.c
+++ b/arch/m68k/atari/atakeyb.c
@@ -121,7 +121,7 @@ KEYBOARD_STATE kb_state;
  * bytes have been lost and in which state of the packet structure we are now.
  * This usually causes keyboards bytes to be interpreted as mouse movements
  * and vice versa, which is very annoying. It seems better to throw away some
- * bytes (that are usually mouse bytes) than to misinterpret them. Therefor I
+ * bytes (that are usually mouse bytes) than to misinterpret them. Therefore I
  * introduced the RESYNC state for IKBD data. In this state, the bytes up to
  * one that really looks like a key event (0x04..0xf2) or the start of a mouse
  * packet (0xf8..0xfb) are thrown away, but at most 2 bytes. This at least
diff --git a/arch/m68k/include/asm/fbio.h b/arch/m68k/include/asm/fbio.h
index b9215a0907d3..0a21da87f7d6 100644
--- a/arch/m68k/include/asm/fbio.h
+++ b/arch/m68k/include/asm/fbio.h
@@ -173,7 +173,7 @@ struct mdi_cfginfo {
 	int     mdi_ncluts;     /* Number of implemented CLUTs in this MDI */
         int     mdi_type;       /* FBTYPE name */
         int     mdi_height;     /* height */
-        int     mdi_width;      /* widht */
+        int     mdi_width;      /* width */
         int     mdi_size;       /* available ram */
         int     mdi_mode;       /* 8bpp, 16bpp or 32bpp */
         int     mdi_pixfreq;    /* pixel clock (from PROM) */
diff --git a/arch/m68k/include/asm/io_no.h b/arch/m68k/include/asm/io_no.h
index 359065d5a9f2..6e2413e518cb 100644
--- a/arch/m68k/include/asm/io_no.h
+++ b/arch/m68k/include/asm/io_no.h
@@ -16,7 +16,7 @@
  * memory location directly.
  */
 /* ++roman: The assignments to temp. vars avoid that gcc sometimes generates
- * two accesses to memory, which may be undesireable for some devices.
+ * two accesses to memory, which may be undesirable for some devices.
  */
 
 /*
diff --git a/arch/m68k/include/asm/ptrace.h b/arch/m68k/include/asm/ptrace.h
index 21605c736f69..6e6e3ac1d913 100644
--- a/arch/m68k/include/asm/ptrace.h
+++ b/arch/m68k/include/asm/ptrace.h
@@ -87,18 +87,10 @@ struct switch_stack {
 #define profile_pc(regs) instruction_pointer(regs)
 extern void show_regs(struct pt_regs *);
 
-/*
- * These are defined as per linux/ptrace.h.
- */
-struct task_struct;
-
 #define arch_has_single_step()	(1)
-extern void user_enable_single_step(struct task_struct *);
-extern void user_disable_single_step(struct task_struct *);
 
 #ifdef CONFIG_MMU
 #define arch_has_block_step()	(1)
-extern void user_enable_block_step(struct task_struct *);
 #endif
 
 #endif /* __KERNEL__ */
diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h
index d72a71dabecb..60b15d0aa072 100644
--- a/arch/m68k/include/asm/unistd.h
+++ b/arch/m68k/include/asm/unistd.h
@@ -351,6 +351,7 @@
 #define __ARCH_WANT_STAT64
 #define __ARCH_WANT_SYS_ALARM
 #define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_IPC
 #define __ARCH_WANT_SYS_PAUSE
 #define __ARCH_WANT_SYS_SGETMASK
 #define __ARCH_WANT_SYS_SIGNAL
@@ -363,6 +364,8 @@
 #define __ARCH_WANT_SYS_LLSEEK
 #define __ARCH_WANT_SYS_NICE
 #define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLD_MMAP
+#define __ARCH_WANT_SYS_OLD_SELECT
 #define __ARCH_WANT_SYS_OLDUMOUNT
 #define __ARCH_WANT_SYS_SIGPENDING
 #define __ARCH_WANT_SYS_SIGPROCMASK
diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S
index e136b8cbe9b9..2391bdff0996 100644
--- a/arch/m68k/kernel/entry.S
+++ b/arch/m68k/kernel/entry.S
@@ -510,7 +510,7 @@ sys_call_table:
 	.long sys_settimeofday
 	.long sys_getgroups16	/* 80 */
 	.long sys_setgroups16
-	.long old_select
+	.long sys_old_select
 	.long sys_symlink
 	.long sys_lstat
 	.long sys_readlink	/* 85 */
@@ -518,7 +518,7 @@ sys_call_table:
 	.long sys_swapon
 	.long sys_reboot
 	.long sys_old_readdir
-	.long old_mmap		/* 90 */
+	.long sys_old_mmap	/* 90 */
 	.long sys_munmap
 	.long sys_truncate
 	.long sys_ftruncate
diff --git a/arch/m68k/kernel/sys_m68k.c b/arch/m68k/kernel/sys_m68k.c
index e3ad2d671973..77896692eb0a 100644
--- a/arch/m68k/kernel/sys_m68k.c
+++ b/arch/m68k/kernel/sys_m68k.c
@@ -46,137 +46,6 @@ asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
 	return sys_mmap_pgoff(addr, len, prot, flags, fd, pgoff);
 }
 
-/*
- * Perform the select(nd, in, out, ex, tv) and mmap() system
- * calls. Linux/m68k cloned Linux/i386, which didn't use to be able to
- * handle more than 4 system call parameters, so these system calls
- * used a memory block for parameter passing..
- */
-
-struct mmap_arg_struct {
-	unsigned long addr;
-	unsigned long len;
-	unsigned long prot;
-	unsigned long flags;
-	unsigned long fd;
-	unsigned long offset;
-};
-
-asmlinkage int old_mmap(struct mmap_arg_struct __user *arg)
-{
-	struct mmap_arg_struct a;
-	int error = -EFAULT;
-
-	if (copy_from_user(&a, arg, sizeof(a)))
-		goto out;
-
-	error = -EINVAL;
-	if (a.offset & ~PAGE_MASK)
-		goto out;
-
-	error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd,
-			       a.offset >> PAGE_SHIFT);
-out:
-	return error;
-}
-
-struct sel_arg_struct {
-	unsigned long n;
-	fd_set __user *inp, *outp, *exp;
-	struct timeval __user *tvp;
-};
-
-asmlinkage int old_select(struct sel_arg_struct __user *arg)
-{
-	struct sel_arg_struct a;
-
-	if (copy_from_user(&a, arg, sizeof(a)))
-		return -EFAULT;
-	/* sys_select() does the appropriate kernel locking */
-	return sys_select(a.n, a.inp, a.outp, a.exp, a.tvp);
-}
-
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly.
- */
-asmlinkage int sys_ipc (uint call, int first, int second,
-			int third, void __user *ptr, long fifth)
-{
-	int version, ret;
-
-	version = call >> 16; /* hack for backward compatibility */
-	call &= 0xffff;
-
-	if (call <= SEMCTL)
-		switch (call) {
-		case SEMOP:
-			return sys_semop (first, ptr, second);
-		case SEMGET:
-			return sys_semget (first, second, third);
-		case SEMCTL: {
-			union semun fourth;
-			if (!ptr)
-				return -EINVAL;
-			if (get_user(fourth.__pad, (void __user *__user *) ptr))
-				return -EFAULT;
-			return sys_semctl (first, second, third, fourth);
-			}
-		default:
-			return -ENOSYS;
-		}
-	if (call <= MSGCTL)
-		switch (call) {
-		case MSGSND:
-			return sys_msgsnd (first, ptr, second, third);
-		case MSGRCV:
-			switch (version) {
-			case 0: {
-				struct ipc_kludge tmp;
-				if (!ptr)
-					return -EINVAL;
-				if (copy_from_user (&tmp, ptr, sizeof (tmp)))
-					return -EFAULT;
-				return sys_msgrcv (first, tmp.msgp, second,
-						   tmp.msgtyp, third);
-				}
-			default:
-				return sys_msgrcv (first, ptr,
-						   second, fifth, third);
-			}
-		case MSGGET:
-			return sys_msgget ((key_t) first, second);
-		case MSGCTL:
-			return sys_msgctl (first, second, ptr);
-		default:
-			return -ENOSYS;
-		}
-	if (call <= SHMCTL)
-		switch (call) {
-		case SHMAT:
-			switch (version) {
-			default: {
-				ulong raddr;
-				ret = do_shmat (first, ptr, second, &raddr);
-				if (ret)
-					return ret;
-				return put_user (raddr, (ulong __user *) third);
-			}
-			}
-		case SHMDT:
-			return sys_shmdt (ptr);
-		case SHMGET:
-			return sys_shmget (first, second, third);
-		case SHMCTL:
-			return sys_shmctl (first, second, ptr);
-		default:
-			return -ENOSYS;
-		}
-
-	return -EINVAL;
-}
-
 /* Convert virtual (user) address VADDR to physical address PADDR */
 #define virt_to_phys_040(vaddr)						\
 ({									\
diff --git a/arch/m68knommu/kernel/ptrace.c b/arch/m68knommu/kernel/ptrace.c
index 85ed2f988f98..f6be1248d216 100644
--- a/arch/m68knommu/kernel/ptrace.c
+++ b/arch/m68knommu/kernel/ptrace.c
@@ -116,12 +116,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	int ret;
 
 	switch (request) {
-		/* when I and D space are separate, these will need to be fixed. */
-		case PTRACE_PEEKTEXT: /* read word at location addr. */ 
-		case PTRACE_PEEKDATA:
-			ret = generic_ptrace_peekdata(child, addr, data);
-			break;
-
 		/* read the word at location addr in the USER area. */
 		case PTRACE_PEEKUSR: {
 			unsigned long tmp;
@@ -160,12 +154,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 			break;
 		}
 
-		/* when I and D space are separate, this will have to be fixed. */
-		case PTRACE_POKETEXT: /* write the word at location addr. */
-		case PTRACE_POKEDATA:
-			ret = generic_ptrace_pokedata(child, addr, data);
-			break;
-
 		case PTRACE_POKEUSR: /* write the word at location addr in the USER area */
 			ret = -EIO;
 			if ((addr & 3) || addr < 0 ||
@@ -202,66 +190,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 			}
 			break;
 
-		case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
-		case PTRACE_CONT: { /* restart after signal. */
-			long tmp;
-
-			ret = -EIO;
-			if (!valid_signal(data))
-				break;
-			if (request == PTRACE_SYSCALL)
-				set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-			else
-				clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-			child->exit_code = data;
-			/* make sure the single step bit is not set. */
-			tmp = get_reg(child, PT_SR) & ~(TRACE_BITS << 16);
-			put_reg(child, PT_SR, tmp);
-			wake_up_process(child);
-			ret = 0;
-			break;
-		}
-
-		/*
-		 * make the child exit.  Best I can do is send it a sigkill. 
-		 * perhaps it should be put in the status that it wants to 
-		 * exit.
-		 */
-		case PTRACE_KILL: {
-			long tmp;
-
-			ret = 0;
-			if (child->exit_state == EXIT_ZOMBIE) /* already dead */
-				break;
-			child->exit_code = SIGKILL;
-			/* make sure the single step bit is not set. */
-			tmp = get_reg(child, PT_SR) & ~(TRACE_BITS << 16);
-			put_reg(child, PT_SR, tmp);
-			wake_up_process(child);
-			break;
-		}
-
-		case PTRACE_SINGLESTEP: {  /* set the trap flag. */
-			long tmp;
-
-			ret = -EIO;
-			if (!valid_signal(data))
-				break;
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-			tmp = get_reg(child, PT_SR) | (TRACE_BITS << 16);
-			put_reg(child, PT_SR, tmp);
-
-			child->exit_code = data;
-			/* give it a chance to run. */
-			wake_up_process(child);
-			ret = 0;
-			break;
-		}
-
-		case PTRACE_DETACH:	/* detach a process that was attached. */
-			ret = ptrace_detach(child, data);
-			break;
-
 		case PTRACE_GETREGS: { /* Get all gp regs from the child. */
 		  	int i;
 			unsigned long tmp;
@@ -325,7 +253,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		break;
 
 		default:
-			ret = -EIO;
+			ret = ptrace_request(child, request, addr, data);
 			break;
 	}
 	return ret;
diff --git a/arch/m68knommu/kernel/sys_m68k.c b/arch/m68knommu/kernel/sys_m68k.c
index 923dd4aab875..d65e9c4c930c 100644
--- a/arch/m68knommu/kernel/sys_m68k.c
+++ b/arch/m68knommu/kernel/sys_m68k.c
@@ -27,142 +27,6 @@
 #include <asm/cacheflush.h>
 #include <asm/unistd.h>
 
-/*
- * Perform the select(nd, in, out, ex, tv) and mmap() system
- * calls. Linux/m68k cloned Linux/i386, which didn't use to be able to
- * handle more than 4 system call parameters, so these system calls
- * used a memory block for parameter passing..
- */
-
-struct mmap_arg_struct {
-	unsigned long addr;
-	unsigned long len;
-	unsigned long prot;
-	unsigned long flags;
-	unsigned long fd;
-	unsigned long offset;
-};
-
-asmlinkage int old_mmap(struct mmap_arg_struct *arg)
-{
-	struct mmap_arg_struct a;
-	int error = -EFAULT;
-
-	if (copy_from_user(&a, arg, sizeof(a)))
-		goto out;
-
-	error = -EINVAL;
-	if (a.offset & ~PAGE_MASK)
-		goto out;
-
-	error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd,
-				a.offset >> PAGE_SHIFT);
-out:
-	return error;
-}
-
-struct sel_arg_struct {
-	unsigned long n;
-	fd_set *inp, *outp, *exp;
-	struct timeval *tvp;
-};
-
-asmlinkage int old_select(struct sel_arg_struct *arg)
-{
-	struct sel_arg_struct a;
-
-	if (copy_from_user(&a, arg, sizeof(a)))
-		return -EFAULT;
-	/* sys_select() does the appropriate kernel locking */
-	return sys_select(a.n, a.inp, a.outp, a.exp, a.tvp);
-}
-
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly.
- */
-asmlinkage int sys_ipc (uint call, int first, int second,
-			int third, void *ptr, long fifth)
-{
-	int version, ret;
-
-	version = call >> 16; /* hack for backward compatibility */
-	call &= 0xffff;
-
-	if (call <= SEMCTL)
-		switch (call) {
-		case SEMOP:
-			return sys_semop (first, (struct sembuf *)ptr, second);
-		case SEMGET:
-			return sys_semget (first, second, third);
-		case SEMCTL: {
-			union semun fourth;
-			if (!ptr)
-				return -EINVAL;
-			if (get_user(fourth.__pad, (void **) ptr))
-				return -EFAULT;
-			return sys_semctl (first, second, third, fourth);
-			}
-		default:
-			return -EINVAL;
-		}
-	if (call <= MSGCTL) 
-		switch (call) {
-		case MSGSND:
-			return sys_msgsnd (first, (struct msgbuf *) ptr, 
-					  second, third);
-		case MSGRCV:
-			switch (version) {
-			case 0: {
-				struct ipc_kludge tmp;
-				if (!ptr)
-					return -EINVAL;
-				if (copy_from_user (&tmp,
-						    (struct ipc_kludge *)ptr,
-						    sizeof (tmp)))
-					return -EFAULT;
-				return sys_msgrcv (first, tmp.msgp, second,
-						   tmp.msgtyp, third);
-				}
-			default:
-				return sys_msgrcv (first,
-						   (struct msgbuf *) ptr,
-						   second, fifth, third);
-			}
-		case MSGGET:
-			return sys_msgget ((key_t) first, second);
-		case MSGCTL:
-			return sys_msgctl (first, second,
-					   (struct msqid_ds *) ptr);
-		default:
-			return -EINVAL;
-		}
-	if (call <= SHMCTL)
-		switch (call) {
-		case SHMAT:
-			switch (version) {
-			default: {
-				ulong raddr;
-				ret = do_shmat (first, ptr, second, &raddr);
-				if (ret)
-					return ret;
-				return put_user (raddr, (ulong __user *) third);
-			}
-			}
-		case SHMDT:
-			return sys_shmdt (ptr);
-		case SHMGET:
-			return sys_shmget (first, second, third);
-		case SHMCTL:
-			return sys_shmctl (first, second, ptr);
-		default:
-			return -ENOSYS;
-		}
-
-	return -EINVAL;
-}
-
 /* sys_cacheflush -- flush (part of) the processor cache.  */
 asmlinkage int
 sys_cacheflush (unsigned long addr, int scope, int cache, unsigned long len)
diff --git a/arch/m68knommu/kernel/syscalltable.S b/arch/m68knommu/kernel/syscalltable.S
index 56dd01ded148..b30b3eb197a5 100644
--- a/arch/m68knommu/kernel/syscalltable.S
+++ b/arch/m68knommu/kernel/syscalltable.S
@@ -100,7 +100,7 @@ ENTRY(sys_call_table)
 	.long sys_settimeofday
 	.long sys_getgroups16	/* 80 */
 	.long sys_setgroups16
-	.long old_select
+	.long sys_old_select
 	.long sys_symlink
 	.long sys_lstat
 	.long sys_readlink	/* 85 */
@@ -108,7 +108,7 @@ ENTRY(sys_call_table)
 	.long sys_ni_syscall	/* sys_swapon */
 	.long sys_reboot
 	.long sys_old_readdir
-	.long old_mmap		/* 90 */
+	.long sys_old_mmap	/* 90 */
 	.long sys_munmap
 	.long sys_truncate
 	.long sys_ftruncate
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index b008168ae946..203ec61c6d4c 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -14,6 +14,8 @@ config MICROBLAZE
 	select USB_ARCH_HAS_EHCI
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select HAVE_OPROFILE
+	select HAVE_DMA_ATTRS
+	select HAVE_DMA_API_DEBUG
 	select TRACING_SUPPORT
 
 config SWAP
@@ -76,9 +78,6 @@ config HAVE_LATENCYTOP_SUPPORT
 config PCI
 	def_bool n
 
-config NO_DMA
-	def_bool y
-
 config DTC
 	def_bool y
 
@@ -146,7 +145,6 @@ menu "Advanced setup"
 
 config ADVANCED_OPTIONS
 	bool "Prompt for advanced kernel configuration options"
-	depends on MMU
 	help
 	  This option will enable prompting for a variety of advanced kernel
 	  configuration options.  These options can cause the kernel to not
@@ -158,6 +156,15 @@ config ADVANCED_OPTIONS
 comment "Default settings for advanced configuration options are used"
 	depends on !ADVANCED_OPTIONS
 
+config XILINX_UNCACHED_SHADOW
+	bool "Are you using uncached shadow for RAM ?"
+	depends on ADVANCED_OPTIONS && !MMU
+	default n
+	help
+	  This is needed to be able to allocate uncachable memory regions.
+	  The feature requires the design to define the RAM memory controller
+	  window to be twice as large as the actual physical memory.
+
 config HIGHMEM_START_BOOL
 	bool "Set high memory pool address"
 	depends on ADVANCED_OPTIONS && HIGHMEM
@@ -175,7 +182,7 @@ config HIGHMEM_START
 
 config LOWMEM_SIZE_BOOL
 	bool "Set maximum low memory"
-	depends on ADVANCED_OPTIONS
+	depends on ADVANCED_OPTIONS && MMU
 	help
 	  This option allows you to set the maximum amount of memory which
 	  will be used as "low memory", that is, memory which the kernel can
@@ -187,7 +194,6 @@ config LOWMEM_SIZE_BOOL
 
 config LOWMEM_SIZE
 	hex "Maximum low memory size (in bytes)" if LOWMEM_SIZE_BOOL
-	depends on MMU
 	default "0x30000000"
 
 config KERNEL_START_BOOL
@@ -208,7 +214,7 @@ config KERNEL_START
 
 config TASK_SIZE_BOOL
 	bool "Set custom user task size"
-	depends on ADVANCED_OPTIONS
+	depends on ADVANCED_OPTIONS && MMU
 	help
 	  This option allows you to set the amount of virtual address space
 	  allocated to user tasks.  This can be useful in optimizing the
@@ -218,42 +224,34 @@ config TASK_SIZE_BOOL
 
 config TASK_SIZE
 	hex "Size of user task space" if TASK_SIZE_BOOL
-	depends on MMU
 	default "0x80000000"
 
-config CONSISTENT_START_BOOL
-	bool "Set custom consistent memory pool address"
-	depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
-	help
-	  This option allows you to set the base virtual address
-	  of the the consistent memory pool.  This pool of virtual
-	  memory is used to make consistent memory allocations.
+endmenu
 
-config CONSISTENT_START
-	hex "Base virtual address of consistent memory pool" if CONSISTENT_START_BOOL
-	depends on MMU
-	default "0xff100000" if NOT_COHERENT_CACHE
+source "mm/Kconfig"
 
-config CONSISTENT_SIZE_BOOL
-	bool "Set custom consistent memory pool size"
-	depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
-	help
-	  This option allows you to set the size of the the
-	  consistent memory pool.  This pool of virtual memory
-	  is used to make consistent memory allocations.
+menu "Exectuable file formats"
 
-config CONSISTENT_SIZE
-	hex "Size of consistent memory pool" if CONSISTENT_SIZE_BOOL
-	depends on MMU
-	default "0x00200000" if NOT_COHERENT_CACHE
+source "fs/Kconfig.binfmt"
 
 endmenu
 
-source "mm/Kconfig"
+menu "Bus Options"
 
-menu "Exectuable file formats"
+config PCI
+	bool "PCI support"
 
-source "fs/Kconfig.binfmt"
+config PCI_DOMAINS
+	def_bool PCI
+
+config PCI_SYSCALL
+	def_bool PCI
+
+config PCI_XILINX
+	bool "Xilinx PCI host bridge support"
+	depends on PCI
+
+source "drivers/pci/Kconfig"
 
 endmenu
 
diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile
index d2d6cfcb1a30..836832dd9b26 100644
--- a/arch/microblaze/Makefile
+++ b/arch/microblaze/Makefile
@@ -50,6 +50,7 @@ libs-y += $(LIBGCC)
 core-y += arch/microblaze/kernel/
 core-y += arch/microblaze/mm/
 core-y += arch/microblaze/platform/
+core-$(CONFIG_PCI) += arch/microblaze/pci/
 
 drivers-$(CONFIG_OPROFILE) += arch/microblaze/oprofile/
 
diff --git a/arch/microblaze/include/asm/device.h b/arch/microblaze/include/asm/device.h
index 78a038452c0f..402b46e630f6 100644
--- a/arch/microblaze/include/asm/device.h
+++ b/arch/microblaze/include/asm/device.h
@@ -14,6 +14,10 @@ struct device_node;
 struct dev_archdata {
 	/* Optional pointer to an OF device node */
 	struct device_node	*of_node;
+
+	/* DMA operations on that device */
+	struct dma_map_ops	*dma_ops;
+	void                    *dma_data;
 };
 
 struct pdev_archdata {
diff --git a/arch/microblaze/include/asm/dma-mapping.h b/arch/microblaze/include/asm/dma-mapping.h
index d00e40099165..18b3731c8509 100644
--- a/arch/microblaze/include/asm/dma-mapping.h
+++ b/arch/microblaze/include/asm/dma-mapping.h
@@ -1 +1,153 @@
-#include <asm-generic/dma-mapping-broken.h>
+/*
+ * Implements the generic device dma API for microblaze and the pci
+ *
+ * Copyright (C) 2009-2010 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2009-2010 PetaLogix
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * This file is base on powerpc and x86 dma-mapping.h versions
+ * Copyright (C) 2004 IBM
+ */
+
+#ifndef _ASM_MICROBLAZE_DMA_MAPPING_H
+#define _ASM_MICROBLAZE_DMA_MAPPING_H
+
+/*
+ * See Documentation/PCI/PCI-DMA-mapping.txt and
+ * Documentation/DMA-API.txt for documentation.
+ */
+
+#include <linux/types.h>
+#include <linux/cache.h>
+#include <linux/mm.h>
+#include <linux/scatterlist.h>
+#include <linux/dma-debug.h>
+#include <linux/dma-attrs.h>
+#include <asm/io.h>
+#include <asm-generic/dma-coherent.h>
+
+#define DMA_ERROR_CODE		(~(dma_addr_t)0x0)
+
+#define __dma_alloc_coherent(dev, gfp, size, handle)	NULL
+#define __dma_free_coherent(size, addr)		((void)0)
+#define __dma_sync(addr, size, rw)		((void)0)
+
+static inline unsigned long device_to_mask(struct device *dev)
+{
+	if (dev->dma_mask && *dev->dma_mask)
+		return *dev->dma_mask;
+	/* Assume devices without mask can take 32 bit addresses */
+	return 0xfffffffful;
+}
+
+extern struct dma_map_ops *dma_ops;
+
+/*
+ * Available generic sets of operations
+ */
+extern struct dma_map_ops dma_direct_ops;
+
+static inline struct dma_map_ops *get_dma_ops(struct device *dev)
+{
+	/* We don't handle the NULL dev case for ISA for now. We could
+	 * do it via an out of line call but it is not needed for now. The
+	 * only ISA DMA device we support is the floppy and we have a hack
+	 * in the floppy driver directly to get a device for us.
+	 */
+	if (unlikely(!dev) || !dev->archdata.dma_ops)
+		return NULL;
+
+	return dev->archdata.dma_ops;
+}
+
+static inline void set_dma_ops(struct device *dev, struct dma_map_ops *ops)
+{
+	dev->archdata.dma_ops = ops;
+}
+
+static inline int dma_supported(struct device *dev, u64 mask)
+{
+	struct dma_map_ops *ops = get_dma_ops(dev);
+
+	if (unlikely(!ops))
+		return 0;
+	if (!ops->dma_supported)
+		return 1;
+	return ops->dma_supported(dev, mask);
+}
+
+#ifdef CONFIG_PCI
+/* We have our own implementation of pci_set_dma_mask() */
+#define HAVE_ARCH_PCI_SET_DMA_MASK
+
+#endif
+
+static inline int dma_set_mask(struct device *dev, u64 dma_mask)
+{
+	struct dma_map_ops *ops = get_dma_ops(dev);
+
+	if (unlikely(ops == NULL))
+		return -EIO;
+	if (ops->set_dma_mask)
+		return ops->set_dma_mask(dev, dma_mask);
+	if (!dev->dma_mask || !dma_supported(dev, dma_mask))
+		return -EIO;
+	*dev->dma_mask = dma_mask;
+	return 0;
+}
+
+#include <asm-generic/dma-mapping-common.h>
+
+static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+	struct dma_map_ops *ops = get_dma_ops(dev);
+	if (ops->mapping_error)
+		return ops->mapping_error(dev, dma_addr);
+
+	return (dma_addr == DMA_ERROR_CODE);
+}
+
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+#define dma_is_consistent(d, h)	(1)
+
+static inline void *dma_alloc_coherent(struct device *dev, size_t size,
+					dma_addr_t *dma_handle, gfp_t flag)
+{
+	struct dma_map_ops *ops = get_dma_ops(dev);
+	void *memory;
+
+	BUG_ON(!ops);
+
+	memory = ops->alloc_coherent(dev, size, dma_handle, flag);
+
+	debug_dma_alloc_coherent(dev, size, *dma_handle, memory);
+	return memory;
+}
+
+static inline void dma_free_coherent(struct device *dev, size_t size,
+				     void *cpu_addr, dma_addr_t dma_handle)
+{
+	struct dma_map_ops *ops = get_dma_ops(dev);
+
+	BUG_ON(!ops);
+	debug_dma_free_coherent(dev, size, cpu_addr, dma_handle);
+	ops->free_coherent(dev, size, cpu_addr, dma_handle);
+}
+
+static inline int dma_get_cache_alignment(void)
+{
+	return L1_CACHE_BYTES;
+}
+
+static inline void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
+		enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+	__dma_sync(vaddr, size, (int)direction);
+}
+
+#endif	/* _ASM_MICROBLAZE_DMA_MAPPING_H */
diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/asm/io.h
index 267c7c779e53..32d621a56aee 100644
--- a/arch/microblaze/include/asm/io.h
+++ b/arch/microblaze/include/asm/io.h
@@ -15,7 +15,23 @@
 #include <asm/page.h>
 #include <linux/types.h>
 #include <linux/mm.h>          /* Get struct page {...} */
+#include <asm-generic/iomap.h>
 
+#ifndef CONFIG_PCI
+#define _IO_BASE	0
+#define _ISA_MEM_BASE	0
+#define PCI_DRAM_OFFSET	0
+#else
+#define _IO_BASE	isa_io_base
+#define _ISA_MEM_BASE	isa_mem_base
+#define PCI_DRAM_OFFSET	pci_dram_offset
+#endif
+
+extern unsigned long isa_io_base;
+extern unsigned long pci_io_base;
+extern unsigned long pci_dram_offset;
+
+extern resource_size_t isa_mem_base;
 
 #define IO_SPACE_LIMIT (0xFFFFFFFF)
 
@@ -124,9 +140,6 @@ static inline void writel(unsigned int v, volatile void __iomem *addr)
 #define virt_to_phys(addr)	((unsigned long)__virt_to_phys(addr))
 #define virt_to_bus(addr)	((unsigned long)__virt_to_phys(addr))
 
-#define __page_address(page) \
-		(PAGE_OFFSET + (((page) - mem_map) << PAGE_SHIFT))
-#define page_to_phys(page)	virt_to_phys((void *)__page_address(page))
 #define page_to_bus(page)	(page_to_phys(page))
 #define bus_to_virt(addr)	(phys_to_virt(addr))
 
@@ -227,15 +240,7 @@ static inline void __iomem *__ioremap(phys_addr_t address, unsigned long size,
 #define out_8(a, v) __raw_writeb((v), (a))
 #define in_8(a) __raw_readb(a)
 
-/* FIXME */
-static inline void __iomem *ioport_map(unsigned long port, unsigned int len)
-{
-	return (void __iomem *) (port);
-}
-
-static inline void ioport_unmap(void __iomem *addr)
-{
-	/* Nothing to do */
-}
+#define ioport_map(port, nr)	((void __iomem *)(port))
+#define ioport_unmap(addr)
 
 #endif /* _ASM_MICROBLAZE_IO_H */
diff --git a/arch/microblaze/include/asm/irq.h b/arch/microblaze/include/asm/irq.h
index 90f050535ebe..31a35c33df63 100644
--- a/arch/microblaze/include/asm/irq.h
+++ b/arch/microblaze/include/asm/irq.h
@@ -14,6 +14,12 @@
 
 #include <linux/interrupt.h>
 
+/* This type is the placeholder for a hardware interrupt number. It has to
+ * be big enough to enclose whatever representation is used by a given
+ * platform.
+ */
+typedef unsigned long irq_hw_number_t;
+
 extern unsigned int nr_irq;
 
 #define NO_IRQ (-1)
@@ -21,7 +27,8 @@ extern unsigned int nr_irq;
 struct pt_regs;
 extern void do_IRQ(struct pt_regs *regs);
 
-/* irq_of_parse_and_map - Parse and Map an interrupt into linux virq space
+/**
+ * irq_of_parse_and_map - Parse and Map an interrupt into linux virq space
  * @device: Device node of the device whose interrupt is to be mapped
  * @index: Index of the interrupt to map
  *
@@ -40,4 +47,32 @@ static inline void irq_dispose_mapping(unsigned int virq)
 	return;
 }
 
+struct irq_host;
+
+/**
+ * irq_create_mapping - Map a hardware interrupt into linux virq space
+ * @host: host owning this hardware interrupt or NULL for default host
+ * @hwirq: hardware irq number in that host space
+ *
+ * Only one mapping per hardware interrupt is permitted. Returns a linux
+ * virq number.
+ * If the sense/trigger is to be specified, set_irq_type() should be called
+ * on the number returned from that call.
+ */
+extern unsigned int irq_create_mapping(struct irq_host *host,
+					irq_hw_number_t hwirq);
+
+/**
+ * irq_create_of_mapping - Map a hardware interrupt into linux virq space
+ * @controller: Device node of the interrupt controller
+ * @inspec: Interrupt specifier from the device-tree
+ * @intsize: Size of the interrupt specifier from the device-tree
+ *
+ * This function is identical to irq_create_mapping except that it takes
+ * as input informations straight from the device-tree (typically the results
+ * of the of_irq_map_*() functions.
+ */
+extern unsigned int irq_create_of_mapping(struct device_node *controller,
+					u32 *intspec, unsigned int intsize);
+
 #endif /* _ASM_MICROBLAZE_IRQ_H */
diff --git a/arch/microblaze/include/asm/page.h b/arch/microblaze/include/asm/page.h
index 9b66c0fa9a32..2dd1d04129e0 100644
--- a/arch/microblaze/include/asm/page.h
+++ b/arch/microblaze/include/asm/page.h
@@ -62,12 +62,6 @@ extern unsigned int __page_offset;
 #define PAGE_OFFSET	CONFIG_KERNEL_START
 
 /*
- * MAP_NR -- given an address, calculate the index of the page struct which
- * points to the address's page.
- */
-#define MAP_NR(addr) (((unsigned long)(addr) - PAGE_OFFSET) >> PAGE_SHIFT)
-
-/*
  * The basic type of a PTE - 32 bit physical addressing.
  */
 typedef unsigned long pte_basic_t;
@@ -154,7 +148,11 @@ extern int page_is_ram(unsigned long pfn);
 # define pfn_to_virt(pfn)	__va(pfn_to_phys((pfn)))
 
 #  ifdef CONFIG_MMU
-#  define virt_to_page(kaddr) 	(mem_map +  MAP_NR(kaddr))
+
+#  define virt_to_page(kaddr)	(pfn_to_page(__pa(kaddr) >> PAGE_SHIFT))
+#  define page_to_virt(page)   __va(page_to_pfn(page) << PAGE_SHIFT)
+#  define page_to_phys(page)     (page_to_pfn(page) << PAGE_SHIFT)
+
 #  else /* CONFIG_MMU */
 #  define virt_to_page(vaddr)	(pfn_to_page(virt_to_pfn(vaddr)))
 #  define page_to_virt(page)	(pfn_to_virt(page_to_pfn(page)))
diff --git a/arch/microblaze/include/asm/pci-bridge.h b/arch/microblaze/include/asm/pci-bridge.h
index 7ad28f6f5f1a..0c77cda9f5d8 100644
--- a/arch/microblaze/include/asm/pci-bridge.h
+++ b/arch/microblaze/include/asm/pci-bridge.h
@@ -1 +1,196 @@
+#ifndef _ASM_MICROBLAZE_PCI_BRIDGE_H
+#define _ASM_MICROBLAZE_PCI_BRIDGE_H
+#ifdef __KERNEL__
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
 #include <linux/pci.h>
+#include <linux/list.h>
+#include <linux/ioport.h>
+
+struct device_node;
+
+enum {
+	/* Force re-assigning all resources (ignore firmware
+	 * setup completely)
+	 */
+	PCI_REASSIGN_ALL_RSRC	= 0x00000001,
+
+	/* Re-assign all bus numbers */
+	PCI_REASSIGN_ALL_BUS	= 0x00000002,
+
+	/* Do not try to assign, just use existing setup */
+	PCI_PROBE_ONLY		= 0x00000004,
+
+	/* Don't bother with ISA alignment unless the bridge has
+	 * ISA forwarding enabled
+	 */
+	PCI_CAN_SKIP_ISA_ALIGN	= 0x00000008,
+
+	/* Enable domain numbers in /proc */
+	PCI_ENABLE_PROC_DOMAINS	= 0x00000010,
+	/* ... except for domain 0 */
+	PCI_COMPAT_DOMAIN_0		= 0x00000020,
+};
+
+/*
+ * Structure of a PCI controller (host bridge)
+ */
+struct pci_controller {
+	struct pci_bus *bus;
+	char is_dynamic;
+	struct device_node *dn;
+	struct list_head list_node;
+	struct device *parent;
+
+	int first_busno;
+	int last_busno;
+
+	int self_busno;
+
+	void __iomem *io_base_virt;
+	resource_size_t io_base_phys;
+
+	resource_size_t pci_io_size;
+
+	/* Some machines (PReP) have a non 1:1 mapping of
+	 * the PCI memory space in the CPU bus space
+	 */
+	resource_size_t pci_mem_offset;
+
+	/* Some machines have a special region to forward the ISA
+	 * "memory" cycles such as VGA memory regions. Left to 0
+	 * if unsupported
+	 */
+	resource_size_t isa_mem_phys;
+	resource_size_t isa_mem_size;
+
+	struct pci_ops *ops;
+	unsigned int __iomem *cfg_addr;
+	void __iomem *cfg_data;
+
+	/*
+	 * Used for variants of PCI indirect handling and possible quirks:
+	 *  SET_CFG_TYPE - used on 4xx or any PHB that does explicit type0/1
+	 *  EXT_REG - provides access to PCI-e extended registers
+	 *  SURPRESS_PRIMARY_BUS - we surpress the setting of PCI_PRIMARY_BUS
+	 *   on Freescale PCI-e controllers since they used the PCI_PRIMARY_BUS
+	 *   to determine which bus number to match on when generating type0
+	 *   config cycles
+	 *  NO_PCIE_LINK - the Freescale PCI-e controllers have issues with
+	 *   hanging if we don't have link and try to do config cycles to
+	 *   anything but the PHB.  Only allow talking to the PHB if this is
+	 *   set.
+	 *  BIG_ENDIAN - cfg_addr is a big endian register
+	 *  BROKEN_MRM - the 440EPx/GRx chips have an errata that causes hangs
+	 *   on the PLB4.  Effectively disable MRM commands by setting this.
+	 */
+#define INDIRECT_TYPE_SET_CFG_TYPE		0x00000001
+#define INDIRECT_TYPE_EXT_REG		0x00000002
+#define INDIRECT_TYPE_SURPRESS_PRIMARY_BUS	0x00000004
+#define INDIRECT_TYPE_NO_PCIE_LINK		0x00000008
+#define INDIRECT_TYPE_BIG_ENDIAN		0x00000010
+#define INDIRECT_TYPE_BROKEN_MRM		0x00000020
+	u32 indirect_type;
+
+	/* Currently, we limit ourselves to 1 IO range and 3 mem
+	 * ranges since the common pci_bus structure can't handle more
+	 */
+	struct resource io_resource;
+	struct resource mem_resources[3];
+	int global_number;	/* PCI domain number */
+};
+
+static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
+{
+	return bus->sysdata;
+}
+
+static inline int isa_vaddr_is_ioport(void __iomem *address)
+{
+	/* No specific ISA handling on ppc32 at this stage, it
+	 * all goes through PCI
+	 */
+	return 0;
+}
+
+/* These are used for config access before all the PCI probing
+   has been done. */
+extern int early_read_config_byte(struct pci_controller *hose, int bus,
+			int dev_fn, int where, u8 *val);
+extern int early_read_config_word(struct pci_controller *hose, int bus,
+			int dev_fn, int where, u16 *val);
+extern int early_read_config_dword(struct pci_controller *hose, int bus,
+			int dev_fn, int where, u32 *val);
+extern int early_write_config_byte(struct pci_controller *hose, int bus,
+			int dev_fn, int where, u8 val);
+extern int early_write_config_word(struct pci_controller *hose, int bus,
+			int dev_fn, int where, u16 val);
+extern int early_write_config_dword(struct pci_controller *hose, int bus,
+			int dev_fn, int where, u32 val);
+
+extern int early_find_capability(struct pci_controller *hose, int bus,
+				 int dev_fn, int cap);
+
+extern void setup_indirect_pci(struct pci_controller *hose,
+			       resource_size_t cfg_addr,
+			       resource_size_t cfg_data, u32 flags);
+
+/* Get the PCI host controller for an OF device */
+extern struct pci_controller *pci_find_hose_for_OF_device(
+			struct device_node *node);
+
+/* Fill up host controller resources from the OF node */
+extern void pci_process_bridge_OF_ranges(struct pci_controller *hose,
+			struct device_node *dev, int primary);
+
+/* Allocate & free a PCI host bridge structure */
+extern struct pci_controller *pcibios_alloc_controller(struct device_node *dev);
+extern void pcibios_free_controller(struct pci_controller *phb);
+extern void pcibios_setup_phb_resources(struct pci_controller *hose);
+
+#ifdef CONFIG_PCI
+extern unsigned int pci_flags;
+
+static inline void pci_set_flags(int flags)
+{
+	pci_flags = flags;
+}
+
+static inline void pci_add_flags(int flags)
+{
+	pci_flags |= flags;
+}
+
+static inline int pci_has_flag(int flag)
+{
+	return pci_flags & flag;
+}
+
+extern struct list_head hose_list;
+
+extern unsigned long pci_address_to_pio(phys_addr_t address);
+extern int pcibios_vaddr_is_ioport(void __iomem *address);
+#else
+static inline unsigned long pci_address_to_pio(phys_addr_t address)
+{
+	return (unsigned long)-1;
+}
+static inline int pcibios_vaddr_is_ioport(void __iomem *address)
+{
+	return 0;
+}
+
+static inline void pci_set_flags(int flags) { }
+static inline void pci_add_flags(int flags) { }
+static inline int pci_has_flag(int flag)
+{
+	return 0;
+}
+#endif	/* CONFIG_PCI */
+
+#endif	/* __KERNEL__ */
+#endif	/* _ASM_MICROBLAZE_PCI_BRIDGE_H */
diff --git a/arch/microblaze/include/asm/pci.h b/arch/microblaze/include/asm/pci.h
index 9f0df5faf2c8..bdd65aaee30d 100644
--- a/arch/microblaze/include/asm/pci.h
+++ b/arch/microblaze/include/asm/pci.h
@@ -1 +1,177 @@
-#include <asm-generic/pci.h>
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Based on powerpc version
+ */
+
+#ifndef __ASM_MICROBLAZE_PCI_H
+#define __ASM_MICROBLAZE_PCI_H
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/dma-mapping.h>
+#include <linux/pci.h>
+
+#include <asm/scatterlist.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+
+#define PCIBIOS_MIN_IO		0x1000
+#define PCIBIOS_MIN_MEM		0x10000000
+
+struct pci_dev;
+
+/* Values for the `which' argument to sys_pciconfig_iobase syscall.  */
+#define IOBASE_BRIDGE_NUMBER	0
+#define IOBASE_MEMORY		1
+#define IOBASE_IO		2
+#define IOBASE_ISA_IO		3
+#define IOBASE_ISA_MEM		4
+
+#define pcibios_scan_all_fns(a, b)	0
+
+/*
+ * Set this to 1 if you want the kernel to re-assign all PCI
+ * bus numbers (don't do that on ppc64 yet !)
+ */
+#define pcibios_assign_all_busses() \
+	(pci_has_flag(PCI_REASSIGN_ALL_BUS))
+
+static inline void pcibios_set_master(struct pci_dev *dev)
+{
+	/* No special bus mastering setup handling */
+}
+
+static inline void pcibios_penalize_isa_irq(int irq, int active)
+{
+	/* We don't do dynamic PCI IRQ allocation */
+}
+
+#ifdef CONFIG_PCI
+extern void set_pci_dma_ops(struct dma_map_ops *dma_ops);
+extern struct dma_map_ops *get_pci_dma_ops(void);
+#else	/* CONFIG_PCI */
+#define set_pci_dma_ops(d)
+#define get_pci_dma_ops()	NULL
+#endif
+
+#ifdef CONFIG_PCI
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	*strat = PCI_DMA_BURST_INFINITY;
+	*strategy_parameter = ~0UL;
+}
+#endif
+
+extern int pci_domain_nr(struct pci_bus *bus);
+
+/* Decide whether to display the domain number in /proc */
+extern int pci_proc_domain(struct pci_bus *bus);
+
+struct vm_area_struct;
+/* Map a range of PCI memory or I/O space for a device into user space */
+int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma,
+			enum pci_mmap_state mmap_state, int write_combine);
+
+/* Tell drivers/pci/proc.c that we have pci_mmap_page_range() */
+#define HAVE_PCI_MMAP	1
+
+extern int pci_legacy_read(struct pci_bus *bus, loff_t port, u32 *val,
+			   size_t count);
+extern int pci_legacy_write(struct pci_bus *bus, loff_t port, u32 val,
+			   size_t count);
+extern int pci_mmap_legacy_page_range(struct pci_bus *bus,
+				      struct vm_area_struct *vma,
+				      enum pci_mmap_state mmap_state);
+
+#define HAVE_PCI_LEGACY	1
+
+/* pci_unmap_{page,single} is a nop so... */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
+#define pci_unmap_addr(PTR, ADDR_NAME)		(0)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	do { } while (0)
+#define pci_unmap_len(PTR, LEN_NAME)		(0)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0)
+
+/* The PCI address space does equal the physical memory
+ * address space (no IOMMU).  The IDE and SCSI device layers use
+ * this boolean for bounce buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS     (1)
+
+extern void pcibios_resource_to_bus(struct pci_dev *dev,
+			struct pci_bus_region *region,
+			struct resource *res);
+
+extern void pcibios_bus_to_resource(struct pci_dev *dev,
+			struct resource *res,
+			struct pci_bus_region *region);
+
+static inline struct resource *pcibios_select_root(struct pci_dev *pdev,
+			struct resource *res)
+{
+	struct resource *root = NULL;
+
+	if (res->flags & IORESOURCE_IO)
+		root = &ioport_resource;
+	if (res->flags & IORESOURCE_MEM)
+		root = &iomem_resource;
+
+	return root;
+}
+
+extern void pcibios_claim_one_bus(struct pci_bus *b);
+
+extern void pcibios_finish_adding_to_bus(struct pci_bus *bus);
+
+extern void pcibios_resource_survey(void);
+
+extern struct pci_controller *init_phb_dynamic(struct device_node *dn);
+extern int remove_phb_dynamic(struct pci_controller *phb);
+
+extern struct pci_dev *of_create_pci_dev(struct device_node *node,
+					struct pci_bus *bus, int devfn);
+
+extern void of_scan_pci_bridge(struct device_node *node,
+				struct pci_dev *dev);
+
+extern void of_scan_bus(struct device_node *node, struct pci_bus *bus);
+extern void of_rescan_bus(struct device_node *node, struct pci_bus *bus);
+
+extern int pci_read_irq_line(struct pci_dev *dev);
+
+extern int pci_bus_find_capability(struct pci_bus *bus,
+						unsigned int devfn, int cap);
+
+struct file;
+extern pgprot_t	pci_phys_mem_access_prot(struct file *file,
+					 unsigned long pfn,
+					 unsigned long size,
+					 pgprot_t prot);
+
+#define HAVE_ARCH_PCI_RESOURCE_TO_USER
+extern void pci_resource_to_user(const struct pci_dev *dev, int bar,
+				 const struct resource *rsrc,
+				 resource_size_t *start, resource_size_t *end);
+
+extern void pcibios_setup_bus_devices(struct pci_bus *bus);
+extern void pcibios_setup_bus_self(struct pci_bus *bus);
+
+/* This part of code was originaly in xilinx-pci.h */
+#ifdef CONFIG_PCI_XILINX
+extern void __init xilinx_pci_init(void);
+#else
+static inline void __init xilinx_pci_init(void) { return; }
+#endif
+
+#endif	/* __KERNEL__ */
+#endif /* __ASM_MICROBLAZE_PCI_H */
diff --git a/arch/microblaze/include/asm/pgalloc.h b/arch/microblaze/include/asm/pgalloc.h
index 7547f5064560..f44b0d696fe2 100644
--- a/arch/microblaze/include/asm/pgalloc.h
+++ b/arch/microblaze/include/asm/pgalloc.h
@@ -19,6 +19,7 @@
 #include <asm/io.h>
 #include <asm/page.h>
 #include <asm/cache.h>
+#include <asm/pgtable.h>
 
 #define PGDIR_ORDER	0
 
@@ -111,7 +112,6 @@ static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
 		unsigned long address)
 {
 	pte_t *pte;
-	extern int mem_init_done;
 	extern void *early_get_page(void);
 	if (mem_init_done) {
 		pte = (pte_t *)__get_free_page(GFP_KERNEL |
diff --git a/arch/microblaze/include/asm/pgtable.h b/arch/microblaze/include/asm/pgtable.h
index cc3a4dfc3eaa..dd2bb60651c7 100644
--- a/arch/microblaze/include/asm/pgtable.h
+++ b/arch/microblaze/include/asm/pgtable.h
@@ -16,6 +16,10 @@
 #define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
 		remap_pfn_range(vma, vaddr, pfn, size, prot)
 
+#ifndef __ASSEMBLY__
+extern int mem_init_done;
+#endif
+
 #ifndef CONFIG_MMU
 
 #define pgd_present(pgd)	(1) /* pages are always present on non MMU */
@@ -51,6 +55,8 @@ static inline int pte_file(pte_t pte) { return 0; }
 
 #define arch_enter_lazy_cpu_mode()	do {} while (0)
 
+#define pgprot_noncached_wc(prot)	prot
+
 #else /* CONFIG_MMU */
 
 #include <asm-generic/4level-fixup.h>
@@ -68,7 +74,6 @@ static inline int pte_file(pte_t pte) { return 0; }
 
 extern unsigned long va_to_phys(unsigned long address);
 extern pte_t *va_to_pte(unsigned long address);
-extern unsigned long ioremap_bot, ioremap_base;
 
 /*
  * The following only work if pte_present() is true.
@@ -85,11 +90,25 @@ static inline pte_t pte_mkspecial(pte_t pte)	{ return pte; }
 #define VMALLOC_START	(CONFIG_KERNEL_START + \
 				max(32 * 1024 * 1024UL, memory_size))
 #define VMALLOC_END	ioremap_bot
-#define VMALLOC_VMADDR(x) ((unsigned long)(x))
 
 #endif /* __ASSEMBLY__ */
 
 /*
+ * Macro to mark a page protection value as "uncacheable".
+ */
+
+#define _PAGE_CACHE_CTL	(_PAGE_GUARDED | _PAGE_NO_CACHE | \
+							_PAGE_WRITETHRU)
+
+#define pgprot_noncached(prot) \
+			(__pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | \
+					_PAGE_NO_CACHE | _PAGE_GUARDED))
+
+#define pgprot_noncached_wc(prot) \
+			 (__pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | \
+							_PAGE_NO_CACHE))
+
+/*
  * The MicroBlaze MMU is identical to the PPC-40x MMU, and uses a hash
  * table containing PTEs, together with a set of 16 segment registers, to
  * define the virtual to physical address mapping.
@@ -397,7 +416,7 @@ static inline unsigned long pte_update(pte_t *p, unsigned long clr,
 	mts     rmsr, %2\n\
 	nop"
 	: "=&r" (old), "=&r" (tmp), "=&r" (msr), "=m" (*p)
-	: "r" ((unsigned long)(p+1) - 4), "r" (clr), "r" (set), "m" (*p)
+	: "r" ((unsigned long)(p + 1) - 4), "r" (clr), "r" (set), "m" (*p)
 	: "cc");
 
 	return old;
@@ -566,18 +585,11 @@ void mapin_ram(void);
 int map_page(unsigned long va, phys_addr_t pa, int flags);
 
 extern int mem_init_done;
-extern unsigned long ioremap_base;
-extern unsigned long ioremap_bot;
 
 asmlinkage void __init mmu_init(void);
 
 void __init *early_get_page(void);
 
-void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle);
-void consistent_free(void *vaddr);
-void consistent_sync(void *vaddr, size_t size, int direction);
-void consistent_sync_page(struct page *page, unsigned long offset,
-	size_t size, int direction);
 #endif /* __ASSEMBLY__ */
 #endif /* __KERNEL__ */
 
@@ -586,6 +598,14 @@ void consistent_sync_page(struct page *page, unsigned long offset,
 #ifndef __ASSEMBLY__
 #include <asm-generic/pgtable.h>
 
+extern unsigned long ioremap_bot, ioremap_base;
+
+void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle);
+void consistent_free(void *vaddr);
+void consistent_sync(void *vaddr, size_t size, int direction);
+void consistent_sync_page(struct page *page, unsigned long offset,
+	size_t size, int direction);
+
 void setup_memory(void);
 #endif /* __ASSEMBLY__ */
 
diff --git a/arch/microblaze/include/asm/prom.h b/arch/microblaze/include/asm/prom.h
index 03f45a963204..e7d67a329bd7 100644
--- a/arch/microblaze/include/asm/prom.h
+++ b/arch/microblaze/include/asm/prom.h
@@ -31,6 +31,21 @@
 /* Other Prototypes */
 extern int early_uartlite_console(void);
 
+#ifdef CONFIG_PCI
+/*
+ * PCI <-> OF matching functions
+ * (XXX should these be here?)
+ */
+struct pci_bus;
+struct pci_dev;
+extern int pci_device_from_OF_node(struct device_node *node,
+					u8 *bus, u8 *devfn);
+extern struct device_node *pci_busdev_to_OF_node(struct pci_bus *bus,
+							int devfn);
+extern struct device_node *pci_device_to_OF_node(struct pci_dev *dev);
+extern void pci_create_OF_bus_map(void);
+#endif
+
 /*
  * OF address retreival & translation
  */
diff --git a/arch/microblaze/include/asm/system.h b/arch/microblaze/include/asm/system.h
index 157970688b2a..59efb3fef957 100644
--- a/arch/microblaze/include/asm/system.h
+++ b/arch/microblaze/include/asm/system.h
@@ -87,6 +87,9 @@ void free_initmem(void);
 extern char *klimit;
 extern void ret_from_fork(void);
 
+extern void *alloc_maybe_bootmem(size_t size, gfp_t mask);
+extern void *zalloc_maybe_bootmem(size_t size, gfp_t mask);
+
 #ifdef CONFIG_DEBUG_FS
 extern struct dentry *of_debugfs_root;
 #endif
diff --git a/arch/microblaze/include/asm/tlbflush.h b/arch/microblaze/include/asm/tlbflush.h
index 10ec70cd8735..bcb8b41d55af 100644
--- a/arch/microblaze/include/asm/tlbflush.h
+++ b/arch/microblaze/include/asm/tlbflush.h
@@ -23,7 +23,7 @@
 extern void _tlbie(unsigned long address);
 extern void _tlbia(void);
 
-#define __tlbia()	_tlbia()
+#define __tlbia()	{ preempt_disable(); _tlbia(); preempt_enable(); }
 
 static inline void local_flush_tlb_all(void)
 	{ __tlbia(); }
diff --git a/arch/microblaze/kernel/Makefile b/arch/microblaze/kernel/Makefile
index b07594eccf9b..e51bc1520825 100644
--- a/arch/microblaze/kernel/Makefile
+++ b/arch/microblaze/kernel/Makefile
@@ -14,7 +14,7 @@ endif
 
 extra-y := head.o vmlinux.lds
 
-obj-y += exceptions.o \
+obj-y += dma.o exceptions.o \
 	hw_exception_handler.o init_task.o intc.o irq.o of_device.o \
 	of_platform.o process.o prom.o prom_parse.o ptrace.o \
 	setup.o signal.o sys_microblaze.o timer.o traps.o reset.o
diff --git a/arch/microblaze/kernel/asm-offsets.c b/arch/microblaze/kernel/asm-offsets.c
index 7bc7b68f97db..0071260a672c 100644
--- a/arch/microblaze/kernel/asm-offsets.c
+++ b/arch/microblaze/kernel/asm-offsets.c
@@ -90,6 +90,7 @@ int main(int argc, char *argv[])
 	DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
 	DEFINE(TI_ADDR_LIMIT, offsetof(struct thread_info, addr_limit));
 	DEFINE(TI_CPU_CONTEXT, offsetof(struct thread_info, cpu_context));
+	DEFINE(TI_PREEMPT_COUNT, offsetof(struct thread_info, preempt_count));
 	BLANK();
 
 	/* struct cpu_context */
diff --git a/arch/microblaze/kernel/cpu/cache.c b/arch/microblaze/kernel/cpu/cache.c
index 2a56bccce4e0..f04d8a86dead 100644
--- a/arch/microblaze/kernel/cpu/cache.c
+++ b/arch/microblaze/kernel/cpu/cache.c
@@ -15,25 +15,6 @@
 #include <asm/cpuinfo.h>
 #include <asm/pvr.h>
 
-static inline void __invalidate_flush_icache(unsigned int addr)
-{
-	__asm__ __volatile__ ("wic	%0, r0;"	\
-					: : "r" (addr));
-}
-
-static inline void __flush_dcache(unsigned int addr)
-{
-	__asm__ __volatile__ ("wdc.flush	%0, r0;"	\
-					: : "r" (addr));
-}
-
-static inline void __invalidate_dcache(unsigned int baseaddr,
-						unsigned int offset)
-{
-	__asm__ __volatile__ ("wdc.clear	%0, %1;"	\
-					: : "r" (baseaddr), "r" (offset));
-}
-
 static inline void __enable_icache_msr(void)
 {
 	__asm__ __volatile__ ("	msrset	r0, %0;		\
@@ -148,9 +129,9 @@ do {									\
 	int step = -line_length;					\
 	BUG_ON(step >= 0);						\
 									\
-	__asm__ __volatile__ (" 1:      " #op " r0, %0;			\
-					bgtid   %0, 1b;			\
-					addk    %0, %0, %1;		\
+	__asm__ __volatile__ (" 1:	" #op "	r0, %0;			\
+					bgtid	%0, 1b;			\
+					addk	%0, %0, %1;		\
 					" : : "r" (len), "r" (step)	\
 					: "memory");			\
 } while (0);
@@ -162,9 +143,9 @@ do {									\
 	int count = end - start;					\
 	BUG_ON(count <= 0);						\
 									\
-	__asm__ __volatile__ (" 1:	" #op " %0, %1;			\
-					bgtid   %1, 1b;			\
-					addk    %1, %1, %2;		\
+	__asm__ __volatile__ (" 1:	" #op "	%0, %1;			\
+					bgtid	%1, 1b;			\
+					addk	%1, %1, %2;		\
 					" : : "r" (start), "r" (count),	\
 					"r" (step) : "memory");		\
 } while (0);
@@ -175,7 +156,7 @@ do {									\
 	int volatile temp;						\
 	BUG_ON(end - start <= 0);					\
 									\
-	__asm__ __volatile__ (" 1:	" #op " %1, r0;			\
+	__asm__ __volatile__ (" 1:	" #op "	%1, r0;			\
 					cmpu	%0, %1, %2;		\
 					bgtid	%0, 1b;			\
 					addk	%1, %1, %3;		\
@@ -183,10 +164,14 @@ do {									\
 					"r" (line_length) : "memory");	\
 } while (0);
 
+#define ASM_LOOP
+
 static void __flush_icache_range_msr_irq(unsigned long start, unsigned long end)
 {
 	unsigned long flags;
-
+#ifndef ASM_LOOP
+	int i;
+#endif
 	pr_debug("%s: start 0x%x, end 0x%x\n", __func__,
 				(unsigned int)start, (unsigned int) end);
 
@@ -196,8 +181,13 @@ static void __flush_icache_range_msr_irq(unsigned long start, unsigned long end)
 	local_irq_save(flags);
 	__disable_icache_msr();
 
+#ifdef ASM_LOOP
 	CACHE_RANGE_LOOP_1(start, end, cpuinfo.icache_line_length, wic);
-
+#else
+	for (i = start; i < end; i += cpuinfo.icache_line_length)
+		__asm__ __volatile__ ("wic	%0, r0;"	\
+				: : "r" (i));
+#endif
 	__enable_icache_msr();
 	local_irq_restore(flags);
 }
@@ -206,7 +196,9 @@ static void __flush_icache_range_nomsr_irq(unsigned long start,
 				unsigned long end)
 {
 	unsigned long flags;
-
+#ifndef ASM_LOOP
+	int i;
+#endif
 	pr_debug("%s: start 0x%x, end 0x%x\n", __func__,
 				(unsigned int)start, (unsigned int) end);
 
@@ -216,7 +208,13 @@ static void __flush_icache_range_nomsr_irq(unsigned long start,
 	local_irq_save(flags);
 	__disable_icache_nomsr();
 
+#ifdef ASM_LOOP
 	CACHE_RANGE_LOOP_1(start, end, cpuinfo.icache_line_length, wic);
+#else
+	for (i = start; i < end; i += cpuinfo.icache_line_length)
+		__asm__ __volatile__ ("wic	%0, r0;"	\
+				: : "r" (i));
+#endif
 
 	__enable_icache_nomsr();
 	local_irq_restore(flags);
@@ -225,25 +223,41 @@ static void __flush_icache_range_nomsr_irq(unsigned long start,
 static void __flush_icache_range_noirq(unsigned long start,
 				unsigned long end)
 {
+#ifndef ASM_LOOP
+	int i;
+#endif
 	pr_debug("%s: start 0x%x, end 0x%x\n", __func__,
 				(unsigned int)start, (unsigned int) end);
 
 	CACHE_LOOP_LIMITS(start, end,
 			cpuinfo.icache_line_length, cpuinfo.icache_size);
+#ifdef ASM_LOOP
 	CACHE_RANGE_LOOP_1(start, end, cpuinfo.icache_line_length, wic);
+#else
+	for (i = start; i < end; i += cpuinfo.icache_line_length)
+		__asm__ __volatile__ ("wic	%0, r0;"	\
+				: : "r" (i));
+#endif
 }
 
 static void __flush_icache_all_msr_irq(void)
 {
 	unsigned long flags;
-
+#ifndef ASM_LOOP
+	int i;
+#endif
 	pr_debug("%s\n", __func__);
 
 	local_irq_save(flags);
 	__disable_icache_msr();
-
+#ifdef ASM_LOOP
 	CACHE_ALL_LOOP(cpuinfo.icache_size, cpuinfo.icache_line_length, wic);
-
+#else
+	for (i = 0; i < cpuinfo.icache_size;
+		 i += cpuinfo.icache_line_length)
+			__asm__ __volatile__ ("wic	%0, r0;" \
+					: : "r" (i));
+#endif
 	__enable_icache_msr();
 	local_irq_restore(flags);
 }
@@ -251,35 +265,59 @@ static void __flush_icache_all_msr_irq(void)
 static void __flush_icache_all_nomsr_irq(void)
 {
 	unsigned long flags;
-
+#ifndef ASM_LOOP
+	int i;
+#endif
 	pr_debug("%s\n", __func__);
 
 	local_irq_save(flags);
 	__disable_icache_nomsr();
-
+#ifdef ASM_LOOP
 	CACHE_ALL_LOOP(cpuinfo.icache_size, cpuinfo.icache_line_length, wic);
-
+#else
+	for (i = 0; i < cpuinfo.icache_size;
+		 i += cpuinfo.icache_line_length)
+			__asm__ __volatile__ ("wic	%0, r0;" \
+					: : "r" (i));
+#endif
 	__enable_icache_nomsr();
 	local_irq_restore(flags);
 }
 
 static void __flush_icache_all_noirq(void)
 {
+#ifndef ASM_LOOP
+	int i;
+#endif
 	pr_debug("%s\n", __func__);
+#ifdef ASM_LOOP
 	CACHE_ALL_LOOP(cpuinfo.icache_size, cpuinfo.icache_line_length, wic);
+#else
+	for (i = 0; i < cpuinfo.icache_size;
+		 i += cpuinfo.icache_line_length)
+			__asm__ __volatile__ ("wic	%0, r0;" \
+					: : "r" (i));
+#endif
 }
 
 static void __invalidate_dcache_all_msr_irq(void)
 {
 	unsigned long flags;
-
+#ifndef ASM_LOOP
+	int i;
+#endif
 	pr_debug("%s\n", __func__);
 
 	local_irq_save(flags);
 	__disable_dcache_msr();
-
+#ifdef ASM_LOOP
 	CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length, wdc);
-
+#else
+	for (i = 0; i < cpuinfo.dcache_size;
+		 i += cpuinfo.dcache_line_length)
+			__asm__ __volatile__ ("wdc	%0, r0;" \
+					: : "r" (i));
+#endif
 	__enable_dcache_msr();
 	local_irq_restore(flags);
 }
@@ -287,60 +325,107 @@ static void __invalidate_dcache_all_msr_irq(void)
 static void __invalidate_dcache_all_nomsr_irq(void)
 {
 	unsigned long flags;
-
+#ifndef ASM_LOOP
+	int i;
+#endif
 	pr_debug("%s\n", __func__);
 
 	local_irq_save(flags);
 	__disable_dcache_nomsr();
-
+#ifdef ASM_LOOP
 	CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length, wdc);
-
+#else
+	for (i = 0; i < cpuinfo.dcache_size;
+		 i += cpuinfo.dcache_line_length)
+			__asm__ __volatile__ ("wdc	%0, r0;" \
+					: : "r" (i));
+#endif
 	__enable_dcache_nomsr();
 	local_irq_restore(flags);
 }
 
 static void __invalidate_dcache_all_noirq_wt(void)
 {
+#ifndef ASM_LOOP
+	int i;
+#endif
 	pr_debug("%s\n", __func__);
+#ifdef ASM_LOOP
 	CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length, wdc)
+#else
+	for (i = 0; i < cpuinfo.dcache_size;
+		 i += cpuinfo.dcache_line_length)
+			__asm__ __volatile__ ("wdc	%0, r0;" \
+					: : "r" (i));
+#endif
 }
 
 /* FIXME this is weird - should be only wdc but not work
  * MS: I am getting bus errors and other weird things */
 static void __invalidate_dcache_all_wb(void)
 {
+#ifndef ASM_LOOP
+	int i;
+#endif
 	pr_debug("%s\n", __func__);
+#ifdef ASM_LOOP
 	CACHE_ALL_LOOP2(cpuinfo.dcache_size, cpuinfo.dcache_line_length,
 					wdc.clear)
+#else
+	for (i = 0; i < cpuinfo.dcache_size;
+		 i += cpuinfo.dcache_line_length)
+			__asm__ __volatile__ ("wdc.clear	%0, r0;" \
+					: : "r" (i));
+#endif
 }
 
 static void __invalidate_dcache_range_wb(unsigned long start,
 						unsigned long end)
 {
+#ifndef ASM_LOOP
+	int i;
+#endif
 	pr_debug("%s: start 0x%x, end 0x%x\n", __func__,
 				(unsigned int)start, (unsigned int) end);
 
 	CACHE_LOOP_LIMITS(start, end,
 			cpuinfo.dcache_line_length, cpuinfo.dcache_size);
+#ifdef ASM_LOOP
 	CACHE_RANGE_LOOP_2(start, end, cpuinfo.dcache_line_length, wdc.clear);
+#else
+	for (i = start; i < end; i += cpuinfo.icache_line_length)
+		__asm__ __volatile__ ("wdc.clear	%0, r0;"	\
+				: : "r" (i));
+#endif
 }
 
 static void __invalidate_dcache_range_nomsr_wt(unsigned long start,
 							unsigned long end)
 {
+#ifndef ASM_LOOP
+	int i;
+#endif
 	pr_debug("%s: start 0x%x, end 0x%x\n", __func__,
 				(unsigned int)start, (unsigned int) end);
 	CACHE_LOOP_LIMITS(start, end,
 			cpuinfo.dcache_line_length, cpuinfo.dcache_size);
 
+#ifdef ASM_LOOP
 	CACHE_RANGE_LOOP_1(start, end, cpuinfo.dcache_line_length, wdc);
+#else
+	for (i = start; i < end; i += cpuinfo.icache_line_length)
+		__asm__ __volatile__ ("wdc	%0, r0;"	\
+				: : "r" (i));
+#endif
 }
 
 static void __invalidate_dcache_range_msr_irq_wt(unsigned long start,
 							unsigned long end)
 {
 	unsigned long flags;
-
+#ifndef ASM_LOOP
+	int i;
+#endif
 	pr_debug("%s: start 0x%x, end 0x%x\n", __func__,
 				(unsigned int)start, (unsigned int) end);
 	CACHE_LOOP_LIMITS(start, end,
@@ -349,7 +434,13 @@ static void __invalidate_dcache_range_msr_irq_wt(unsigned long start,
 	local_irq_save(flags);
 	__disable_dcache_msr();
 
+#ifdef ASM_LOOP
 	CACHE_RANGE_LOOP_1(start, end, cpuinfo.dcache_line_length, wdc);
+#else
+	for (i = start; i < end; i += cpuinfo.icache_line_length)
+		__asm__ __volatile__ ("wdc	%0, r0;"	\
+				: : "r" (i));
+#endif
 
 	__enable_dcache_msr();
 	local_irq_restore(flags);
@@ -359,7 +450,9 @@ static void __invalidate_dcache_range_nomsr_irq(unsigned long start,
 							unsigned long end)
 {
 	unsigned long flags;
-
+#ifndef ASM_LOOP
+	int i;
+#endif
 	pr_debug("%s: start 0x%x, end 0x%x\n", __func__,
 				(unsigned int)start, (unsigned int) end);
 
@@ -369,7 +462,13 @@ static void __invalidate_dcache_range_nomsr_irq(unsigned long start,
 	local_irq_save(flags);
 	__disable_dcache_nomsr();
 
+#ifdef ASM_LOOP
 	CACHE_RANGE_LOOP_1(start, end, cpuinfo.dcache_line_length, wdc);
+#else
+	for (i = start; i < end; i += cpuinfo.icache_line_length)
+		__asm__ __volatile__ ("wdc	%0, r0;"	\
+				: : "r" (i));
+#endif
 
 	__enable_dcache_nomsr();
 	local_irq_restore(flags);
@@ -377,19 +476,38 @@ static void __invalidate_dcache_range_nomsr_irq(unsigned long start,
 
 static void __flush_dcache_all_wb(void)
 {
+#ifndef ASM_LOOP
+	int i;
+#endif
 	pr_debug("%s\n", __func__);
+#ifdef ASM_LOOP
 	CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length,
 				wdc.flush);
+#else
+	for (i = 0; i < cpuinfo.dcache_size;
+		 i += cpuinfo.dcache_line_length)
+			__asm__ __volatile__ ("wdc.flush	%0, r0;" \
+					: : "r" (i));
+#endif
 }
 
 static void __flush_dcache_range_wb(unsigned long start, unsigned long end)
 {
+#ifndef ASM_LOOP
+	int i;
+#endif
 	pr_debug("%s: start 0x%x, end 0x%x\n", __func__,
 				(unsigned int)start, (unsigned int) end);
 
 	CACHE_LOOP_LIMITS(start, end,
 			cpuinfo.dcache_line_length, cpuinfo.dcache_size);
+#ifdef ASM_LOOP
 	CACHE_RANGE_LOOP_2(start, end, cpuinfo.dcache_line_length, wdc.flush);
+#else
+	for (i = start; i < end; i += cpuinfo.icache_line_length)
+		__asm__ __volatile__ ("wdc.flush	%0, r0;"	\
+				: : "r" (i));
+#endif
 }
 
 /* struct for wb caches and for wt caches */
@@ -493,7 +611,7 @@ const struct scache wt_nomsr_noirq = {
 #define CPUVER_7_20_A	0x0c
 #define CPUVER_7_20_D	0x0f
 
-#define INFO(s)	printk(KERN_INFO "cache: " s " \n");
+#define INFO(s)	printk(KERN_INFO "cache: " s "\n");
 
 void microblaze_cache_init(void)
 {
@@ -532,4 +650,9 @@ void microblaze_cache_init(void)
 			}
 		}
 	}
+	invalidate_dcache();
+	enable_dcache();
+
+	invalidate_icache();
+	enable_icache();
 }
diff --git a/arch/microblaze/kernel/dma.c b/arch/microblaze/kernel/dma.c
new file mode 100644
index 000000000000..b1084974fccd
--- /dev/null
+++ b/arch/microblaze/kernel/dma.c
@@ -0,0 +1,156 @@
+/*
+ * Copyright (C) 2009-2010 PetaLogix
+ * Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corporation
+ *
+ * Provide default implementations of the DMA mapping callbacks for
+ * directly mapped busses.
+ */
+
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/dma-debug.h>
+#include <asm/bug.h>
+#include <asm/cacheflush.h>
+
+/*
+ * Generic direct DMA implementation
+ *
+ * This implementation supports a per-device offset that can be applied if
+ * the address at which memory is visible to devices is not 0. Platform code
+ * can set archdata.dma_data to an unsigned long holding the offset. By
+ * default the offset is PCI_DRAM_OFFSET.
+ */
+static inline void __dma_sync_page(unsigned long paddr, unsigned long offset,
+				size_t size, enum dma_data_direction direction)
+{
+	switch (direction) {
+	case DMA_TO_DEVICE:
+		flush_dcache_range(paddr + offset, paddr + offset + size);
+		break;
+	case DMA_FROM_DEVICE:
+		invalidate_dcache_range(paddr + offset, paddr + offset + size);
+		break;
+	default:
+		BUG();
+	}
+}
+
+static unsigned long get_dma_direct_offset(struct device *dev)
+{
+	if (dev)
+		return (unsigned long)dev->archdata.dma_data;
+
+	return PCI_DRAM_OFFSET; /* FIXME Not sure if is correct */
+}
+
+#define NOT_COHERENT_CACHE
+
+static void *dma_direct_alloc_coherent(struct device *dev, size_t size,
+				dma_addr_t *dma_handle, gfp_t flag)
+{
+#ifdef NOT_COHERENT_CACHE
+	return consistent_alloc(flag, size, dma_handle);
+#else
+	void *ret;
+	struct page *page;
+	int node = dev_to_node(dev);
+
+	/* ignore region specifiers */
+	flag  &= ~(__GFP_HIGHMEM);
+
+	page = alloc_pages_node(node, flag, get_order(size));
+	if (page == NULL)
+		return NULL;
+	ret = page_address(page);
+	memset(ret, 0, size);
+	*dma_handle = virt_to_phys(ret) + get_dma_direct_offset(dev);
+
+	return ret;
+#endif
+}
+
+static void dma_direct_free_coherent(struct device *dev, size_t size,
+			      void *vaddr, dma_addr_t dma_handle)
+{
+#ifdef NOT_COHERENT_CACHE
+	consistent_free(vaddr);
+#else
+	free_pages((unsigned long)vaddr, get_order(size));
+#endif
+}
+
+static int dma_direct_map_sg(struct device *dev, struct scatterlist *sgl,
+			     int nents, enum dma_data_direction direction,
+			     struct dma_attrs *attrs)
+{
+	struct scatterlist *sg;
+	int i;
+
+	/* FIXME this part of code is untested */
+	for_each_sg(sgl, sg, nents, i) {
+		sg->dma_address = sg_phys(sg) + get_dma_direct_offset(dev);
+		sg->dma_length = sg->length;
+		__dma_sync_page(page_to_phys(sg_page(sg)), sg->offset,
+							sg->length, direction);
+	}
+
+	return nents;
+}
+
+static void dma_direct_unmap_sg(struct device *dev, struct scatterlist *sg,
+				int nents, enum dma_data_direction direction,
+				struct dma_attrs *attrs)
+{
+}
+
+static int dma_direct_dma_supported(struct device *dev, u64 mask)
+{
+	return 1;
+}
+
+static inline dma_addr_t dma_direct_map_page(struct device *dev,
+					     struct page *page,
+					     unsigned long offset,
+					     size_t size,
+					     enum dma_data_direction direction,
+					     struct dma_attrs *attrs)
+{
+	__dma_sync_page(page_to_phys(page), offset, size, direction);
+	return page_to_phys(page) + offset + get_dma_direct_offset(dev);
+}
+
+static inline void dma_direct_unmap_page(struct device *dev,
+					 dma_addr_t dma_address,
+					 size_t size,
+					 enum dma_data_direction direction,
+					 struct dma_attrs *attrs)
+{
+/* There is not necessary to do cache cleanup
+ *
+ * phys_to_virt is here because in __dma_sync_page is __virt_to_phys and
+ * dma_address is physical address
+ */
+	__dma_sync_page(dma_address, 0 , size, direction);
+}
+
+struct dma_map_ops dma_direct_ops = {
+	.alloc_coherent	= dma_direct_alloc_coherent,
+	.free_coherent	= dma_direct_free_coherent,
+	.map_sg		= dma_direct_map_sg,
+	.unmap_sg	= dma_direct_unmap_sg,
+	.dma_supported	= dma_direct_dma_supported,
+	.map_page	= dma_direct_map_page,
+	.unmap_page	= dma_direct_unmap_page,
+};
+EXPORT_SYMBOL(dma_direct_ops);
+
+/* Number of entries preallocated for DMA-API debugging */
+#define PREALLOC_DMA_DEBUG_ENTRIES (1 << 16)
+
+static int __init dma_init(void)
+{
+       dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES);
+
+       return 0;
+}
+fs_initcall(dma_init);
diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S
index 3bad4ff49471..c0ede25c5b99 100644
--- a/arch/microblaze/kernel/entry.S
+++ b/arch/microblaze/kernel/entry.S
@@ -305,7 +305,7 @@ C_ENTRY(_user_exception):
 	swi	r11, r1, PTO+PT_R1;		/* Store user SP.  */
 	addi	r11, r0, 1;
 	swi	r11, r0, TOPHYS(PER_CPU(KM));	/* Now we're in kernel-mode.  */
-2:	lwi	r31, r0, TOPHYS(PER_CPU(CURRENT_SAVE));	/* get saved current */
+2:	lwi	CURRENT_TASK, r0, TOPHYS(PER_CPU(CURRENT_SAVE));
 	/* Save away the syscall number.  */
 	swi	r12, r1, PTO+PT_R0;
 	tovirt(r1,r1)
@@ -322,8 +322,7 @@ C_ENTRY(_user_exception):
 	rtid	r11, 0
 	nop
 3:
-	add	r11, r0, CURRENT_TASK	 /* Get current task ptr into r11 */
-	lwi	r11, r11, TS_THREAD_INFO /* get thread info */
+	lwi	r11, CURRENT_TASK, TS_THREAD_INFO /* get thread info */
 	lwi	r11, r11, TI_FLAGS	 /* get flags in thread info */
 	andi	r11, r11, _TIF_WORK_SYSCALL_MASK
 	beqi	r11, 4f
@@ -382,60 +381,50 @@ C_ENTRY(ret_from_trap):
 /* See if returning to kernel mode, if so, skip resched &c.  */
 	bnei	r11, 2f;
 
+	swi	r3, r1, PTO + PT_R3
+	swi	r4, r1, PTO + PT_R4
+
 	/* We're returning to user mode, so check for various conditions that
 	 * trigger rescheduling. */
-	# FIXME: Restructure all these flag checks.
-	add	r11, r0, CURRENT_TASK;	/* Get current task ptr into r11 */
-	lwi	r11, r11, TS_THREAD_INFO;	/* get thread info */
+	/* FIXME: Restructure all these flag checks. */
+	lwi	r11, CURRENT_TASK, TS_THREAD_INFO;	/* get thread info */
 	lwi	r11, r11, TI_FLAGS;		/* get flags in thread info */
 	andi	r11, r11, _TIF_WORK_SYSCALL_MASK
 	beqi	r11, 1f
 
-	swi	r3, r1, PTO + PT_R3
-	swi	r4, r1, PTO + PT_R4
 	brlid	r15, do_syscall_trace_leave
 	addik	r5, r1, PTO + PT_R0
-	lwi	r3, r1, PTO + PT_R3
-	lwi	r4, r1, PTO + PT_R4
 1:
-
 	/* We're returning to user mode, so check for various conditions that
 	 * trigger rescheduling. */
-	/* Get current task ptr into r11 */
-	add	r11, r0, CURRENT_TASK;	/* Get current task ptr into r11 */
-	lwi	r11, r11, TS_THREAD_INFO;	/* get thread info */
+	/* get thread info from current task */
+	lwi	r11, CURRENT_TASK, TS_THREAD_INFO;
 	lwi	r11, r11, TI_FLAGS;		/* get flags in thread info */
 	andi	r11, r11, _TIF_NEED_RESCHED;
 	beqi	r11, 5f;
 
-	swi	r3, r1, PTO + PT_R3; /* store syscall result */
-	swi	r4, r1, PTO + PT_R4;
 	bralid	r15, schedule;	/* Call scheduler */
 	nop;				/* delay slot */
-	lwi	r3, r1, PTO + PT_R3; /* restore syscall result */
-	lwi	r4, r1, PTO + PT_R4;
 
 	/* Maybe handle a signal */
-5:	add	r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */
-	lwi	r11, r11, TS_THREAD_INFO;	/* get thread info */
+5:	/* get thread info from current task*/
+	lwi	r11, CURRENT_TASK, TS_THREAD_INFO;
 	lwi	r11, r11, TI_FLAGS;	/* get flags in thread info */
 	andi	r11, r11, _TIF_SIGPENDING;
 	beqi	r11, 1f;		/* Signals to handle, handle them */
 
-	swi	r3, r1, PTO + PT_R3; /* store syscall result */
-	swi	r4, r1, PTO + PT_R4;
 	la	r5, r1, PTO;		/* Arg 1: struct pt_regs *regs */
-	add	r6, r0, r0;		/* Arg 2: sigset_t *oldset */
 	addi	r7, r0, 1;		/* Arg 3: int in_syscall */
 	bralid	r15, do_signal;	/* Handle any signals */
-	nop;
+	add	r6, r0, r0;		/* Arg 2: sigset_t *oldset */
+
+/* Finally, return to user state.  */
+1:
 	lwi	r3, r1, PTO + PT_R3; /* restore syscall result */
 	lwi	r4, r1, PTO + PT_R4;
 
-/* Finally, return to user state.  */
-1:	swi	r0, r0, PER_CPU(KM);	/* Now officially in user state. */
-	add	r11, r0, CURRENT_TASK;	/* Get current task ptr into r11 */
-	swi	r11, r0, PER_CPU(CURRENT_SAVE); /* save current */
+	swi	r0, r0, PER_CPU(KM);	/* Now officially in user state. */
+	swi	CURRENT_TASK, r0, PER_CPU(CURRENT_SAVE); /* save current */
 	VM_OFF;
 	tophys(r1,r1);
 	RESTORE_REGS;
@@ -565,7 +554,7 @@ C_ENTRY(sys_rt_sigreturn_wrapper):
 	swi	r11, r1, PTO+PT_R1; /* Store user SP.  */		\
 	addi	r11, r0, 1;						\
 	swi	r11, r0, TOPHYS(PER_CPU(KM)); /* Now we're in kernel-mode.*/\
-2:	lwi	r31, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); /* get saved current */\
+2:	lwi	CURRENT_TASK, r0, TOPHYS(PER_CPU(CURRENT_SAVE));	\
 	/* Save away the syscall number.  */				\
 	swi	r0, r1, PTO+PT_R0;					\
 	tovirt(r1,r1)
@@ -673,9 +662,7 @@ C_ENTRY(ret_from_exc):
 
 	/* We're returning to user mode, so check for various conditions that
 	   trigger rescheduling. */
-	/* Get current task ptr into r11 */
-	add	r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */
-	lwi	r11, r11, TS_THREAD_INFO;	/* get thread info */
+	lwi	r11, CURRENT_TASK, TS_THREAD_INFO;	/* get thread info */
 	lwi	r11, r11, TI_FLAGS;	/* get flags in thread info */
 	andi	r11, r11, _TIF_NEED_RESCHED;
 	beqi	r11, 5f;
@@ -685,8 +672,7 @@ C_ENTRY(ret_from_exc):
 	nop;				/* delay slot */
 
 	/* Maybe handle a signal */
-5:	add	r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */
-	lwi	r11, r11, TS_THREAD_INFO;	/* get thread info */
+5:	lwi	r11, CURRENT_TASK, TS_THREAD_INFO;	/* get thread info */
 	lwi	r11, r11, TI_FLAGS;	/* get flags in thread info */
 	andi	r11, r11, _TIF_SIGPENDING;
 	beqi	r11, 1f;		/* Signals to handle, handle them */
@@ -705,15 +691,13 @@ C_ENTRY(ret_from_exc):
 	 * store return registers separately because this macros is use
 	 * for others exceptions */
 	la	r5, r1, PTO;		/* Arg 1: struct pt_regs *regs */
-	add	r6, r0, r0;		/* Arg 2: sigset_t *oldset */
 	addi	r7, r0, 0;		/* Arg 3: int in_syscall */
 	bralid	r15, do_signal;	/* Handle any signals */
-	nop;
+	add	r6, r0, r0;		/* Arg 2: sigset_t *oldset */
 
 /* Finally, return to user state.  */
 1:	swi	r0, r0, PER_CPU(KM);	/* Now officially in user state. */
-	add	r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */
-	swi	r11, r0, PER_CPU(CURRENT_SAVE); /* save current */
+	swi	CURRENT_TASK, r0, PER_CPU(CURRENT_SAVE); /* save current */
 	VM_OFF;
 	tophys(r1,r1);
 
@@ -802,7 +786,7 @@ C_ENTRY(_interrupt):
 	swi	r11, r0, TOPHYS(PER_CPU(KM));
 
 2:
-	lwi	r31, r0, TOPHYS(PER_CPU(CURRENT_SAVE));
+	lwi	CURRENT_TASK, r0, TOPHYS(PER_CPU(CURRENT_SAVE));
 	swi	r0, r1, PTO + PT_R0;
 	tovirt(r1,r1)
 	la	r5, r1, PTO;
@@ -817,8 +801,7 @@ ret_from_irq:
 	lwi	r11, r1, PTO + PT_MODE;
 	bnei	r11, 2f;
 
-	add	r11, r0, CURRENT_TASK;
-	lwi	r11, r11, TS_THREAD_INFO;
+	lwi	r11, CURRENT_TASK, TS_THREAD_INFO;
 	lwi	r11, r11, TI_FLAGS; /* MS: get flags from thread info */
 	andi	r11, r11, _TIF_NEED_RESCHED;
 	beqi	r11, 5f
@@ -826,8 +809,7 @@ ret_from_irq:
 	nop; /* delay slot */
 
     /* Maybe handle a signal */
-5:	add	r11, r0, CURRENT_TASK;
-	lwi	r11, r11, TS_THREAD_INFO; /* MS: get thread info */
+5:	lwi	r11, CURRENT_TASK, TS_THREAD_INFO; /* MS: get thread info */
 	lwi	r11, r11, TI_FLAGS; /* get flags in thread info */
 	andi	r11, r11, _TIF_SIGPENDING;
 	beqid	r11, no_intr_resched
@@ -842,8 +824,7 @@ no_intr_resched:
     /* Disable interrupts, we are now committed to the state restore */
 	disable_irq
 	swi	r0, r0, PER_CPU(KM); /* MS: Now officially in user state. */
-	add	r11, r0, CURRENT_TASK;
-	swi	r11, r0, PER_CPU(CURRENT_SAVE);
+	swi	CURRENT_TASK, r0, PER_CPU(CURRENT_SAVE);
 	VM_OFF;
 	tophys(r1,r1);
 	lwi	r3, r1, PTO + PT_R3; /* MS: restore saved r3, r4 registers */
@@ -853,7 +834,28 @@ no_intr_resched:
 	lwi	r1, r1, PT_R1 - PT_SIZE;
 	bri	6f;
 /* MS: Return to kernel state. */
-2:	VM_OFF /* MS: turn off MMU */
+2:
+#ifdef CONFIG_PREEMPT
+	lwi	r11, CURRENT_TASK, TS_THREAD_INFO;
+	/* MS: get preempt_count from thread info */
+	lwi	r5, r11, TI_PREEMPT_COUNT;
+	bgti	r5, restore;
+
+	lwi	r5, r11, TI_FLAGS;		/* get flags in thread info */
+	andi	r5, r5, _TIF_NEED_RESCHED;
+	beqi	r5, restore /* if zero jump over */
+
+preempt:
+	/* interrupts are off that's why I am calling preempt_chedule_irq */
+	bralid	r15, preempt_schedule_irq
+	nop
+	lwi	r11, CURRENT_TASK, TS_THREAD_INFO;	/* get thread info */
+	lwi	r5, r11, TI_FLAGS;		/* get flags in thread info */
+	andi	r5, r5, _TIF_NEED_RESCHED;
+	bnei	r5, preempt /* if non zero jump to resched */
+restore:
+#endif
+	VM_OFF /* MS: turn off MMU */
 	tophys(r1,r1)
 	lwi	r3, r1, PTO + PT_R3; /* MS: restore saved r3, r4 registers */
 	lwi	r4, r1, PTO + PT_R4;
@@ -915,7 +917,7 @@ C_ENTRY(_debug_exception):
 	swi	r11, r1, PTO+PT_R1; /* Store user SP.  */
 	addi	r11, r0, 1;
 	swi	r11, r0, TOPHYS(PER_CPU(KM));	/* Now we're in kernel-mode.  */
-2:	lwi	r31, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); /* get saved current */
+2:	lwi	CURRENT_TASK, r0, TOPHYS(PER_CPU(CURRENT_SAVE));
 	/* Save away the syscall number.  */
 	swi	r0, r1, PTO+PT_R0;
 	tovirt(r1,r1)
@@ -935,8 +937,7 @@ dbtrap_call:	rtbd	r11, 0;
 	bnei	r11, 2f;
 
 	/* Get current task ptr into r11 */
-	add	r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */
-	lwi	r11, r11, TS_THREAD_INFO;	/* get thread info */
+	lwi	r11, CURRENT_TASK, TS_THREAD_INFO;	/* get thread info */
 	lwi	r11, r11, TI_FLAGS;	/* get flags in thread info */
 	andi	r11, r11, _TIF_NEED_RESCHED;
 	beqi	r11, 5f;
@@ -949,8 +950,7 @@ dbtrap_call:	rtbd	r11, 0;
 	/* XXX m68knommu also checks TASK_STATE & TASK_COUNTER here.  */
 
 	/* Maybe handle a signal */
-5:	add	r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */
-	lwi	r11, r11, TS_THREAD_INFO;	/* get thread info */
+5:	lwi	r11, CURRENT_TASK, TS_THREAD_INFO;	/* get thread info */
 	lwi	r11, r11, TI_FLAGS;	/* get flags in thread info */
 	andi	r11, r11, _TIF_SIGPENDING;
 	beqi	r11, 1f;		/* Signals to handle, handle them */
@@ -966,16 +966,14 @@ dbtrap_call:	rtbd	r11, 0;
 	   (in a possibly modified form) after do_signal returns.  */
 
 	la	r5, r1, PTO;		/* Arg 1: struct pt_regs *regs */
-	add	r6, r0, r0;		/* Arg 2: sigset_t *oldset */
 	addi  r7, r0, 0;	/* Arg 3: int in_syscall */
 	bralid	r15, do_signal;	/* Handle any signals */
-	nop;
+	add	r6, r0, r0;		/* Arg 2: sigset_t *oldset */
 
 
 /* Finally, return to user state.  */
 1:	swi	r0, r0, PER_CPU(KM);	/* Now officially in user state. */
-	add	r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */
-	swi	r11, r0, PER_CPU(CURRENT_SAVE); /* save current */
+	swi	CURRENT_TASK, r0, PER_CPU(CURRENT_SAVE); /* save current */
 	VM_OFF;
 	tophys(r1,r1);
 
@@ -1007,7 +1005,7 @@ DBTRAP_return:		/* Make global symbol for debugging */
 
 ENTRY(_switch_to)
 	/* prepare return value */
-	addk	r3, r0, r31
+	addk	r3, r0, CURRENT_TASK
 
 	/* save registers in cpu_context */
 	/* use r11 and r12, volatile registers, as temp register */
@@ -1051,10 +1049,10 @@ ENTRY(_switch_to)
 	nop
 	swi	r12, r11, CC_FSR
 
-	/* update r31, the current */
-	lwi	r31, r6, TI_TASK/* give me pointer to task which will be next */
+	/* update r31, the current-give me pointer to task which will be next */
+	lwi	CURRENT_TASK, r6, TI_TASK
 	/* stored it to current_save too */
-	swi	r31, r0, PER_CPU(CURRENT_SAVE)
+	swi	CURRENT_TASK, r0, PER_CPU(CURRENT_SAVE)
 
 	/* get new process' cpu context and restore */
 	/* give me start where start context of next task */
diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S
index 30916193fcc7..cb7815cfe5ab 100644
--- a/arch/microblaze/kernel/head.S
+++ b/arch/microblaze/kernel/head.S
@@ -99,8 +99,8 @@ no_fdt_arg:
 	tophys(r4,r4)			/* convert to phys address */
 	ori	r3, r0, COMMAND_LINE_SIZE - 1 /* number of loops */
 _copy_command_line:
-	lbu	r7, r5, r6 /* r7=r5+r6 - r5 contain pointer to command line */
-	sb	r7, r4, r6		/* addr[r4+r6]= r7*/
+	lbu	r2, r5, r6 /* r7=r5+r6 - r5 contain pointer to command line */
+	sb	r2, r4, r6		/* addr[r4+r6]= r7*/
 	addik	r6, r6, 1		/* increment counting */
 	bgtid	r3, _copy_command_line	/* loop for all entries       */
 	addik	r3, r3, -1		/* descrement loop */
@@ -136,6 +136,11 @@ _invalidate:
 	addik	r3, r3, -1
 	/* sync */
 
+	/* Setup the kernel PID */
+	mts	rpid,r0			/* Load the kernel PID */
+	nop
+	bri	4
+
 	/*
 	 * We should still be executing code at physical address area
 	 * RAM_BASEADDR at this point. However, kernel code is at
@@ -146,10 +151,6 @@ _invalidate:
 	addik	r3,r0, CONFIG_KERNEL_START /* Load the kernel virtual address */
 	tophys(r4,r3)			/* Load the kernel physical address */
 
-	mts	rpid,r0			/* Load the kernel PID */
-	nop
-	bri	4
-
 	/*
 	 * Configure and load two entries into TLB slots 0 and 1.
 	 * In case we are pinning TLBs, these are reserved in by the
diff --git a/arch/microblaze/kernel/irq.c b/arch/microblaze/kernel/irq.c
index 0f06034d1fe0..6f39e2c001f3 100644
--- a/arch/microblaze/kernel/irq.c
+++ b/arch/microblaze/kernel/irq.c
@@ -93,3 +93,18 @@ skip:
 	}
 	return 0;
 }
+
+/* MS: There is no any advance mapping mechanism. We are using simple 32bit
+  intc without any cascades or any connection that's why mapping is 1:1 */
+unsigned int irq_create_mapping(struct irq_host *host, irq_hw_number_t hwirq)
+{
+	return hwirq;
+}
+EXPORT_SYMBOL_GPL(irq_create_mapping);
+
+unsigned int irq_create_of_mapping(struct device_node *controller,
+					u32 *intspec, unsigned int intsize)
+{
+	return intspec[0];
+}
+EXPORT_SYMBOL_GPL(irq_create_of_mapping);
diff --git a/arch/microblaze/kernel/ptrace.c b/arch/microblaze/kernel/ptrace.c
index 4b3ac32754de..6d6349a145f9 100644
--- a/arch/microblaze/kernel/ptrace.c
+++ b/arch/microblaze/kernel/ptrace.c
@@ -78,26 +78,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	unsigned long copied;
 
 	switch (request) {
-	case PTRACE_PEEKTEXT: /* read word at location addr. */
-	case PTRACE_PEEKDATA:
-		pr_debug("PEEKTEXT/PEEKDATA at %08lX\n", addr);
-		copied = access_process_vm(child, addr, &val, sizeof(val), 0);
-		rval = -EIO;
-		if (copied != sizeof(val))
-			break;
-		rval = put_user(val, (unsigned long *)data);
-		break;
-
-	case PTRACE_POKETEXT: /* write the word at location addr. */
-	case PTRACE_POKEDATA:
-		pr_debug("POKETEXT/POKEDATA to %08lX\n", addr);
-		rval = 0;
-		if (access_process_vm(child, addr, &data, sizeof(data), 1)
-		    == sizeof(data))
-			break;
-		rval = -EIO;
-		break;
-
 	/* Read/write the word at location ADDR in the registers. */
 	case PTRACE_PEEKUSR:
 	case PTRACE_POKEUSR:
@@ -130,50 +110,8 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		if (rval == 0 && request == PTRACE_PEEKUSR)
 			rval = put_user(val, (unsigned long *)data);
 		break;
-	/* Continue and stop at next (return from) syscall */
-	case PTRACE_SYSCALL:
-		pr_debug("PTRACE_SYSCALL\n");
-	case PTRACE_SINGLESTEP:
-		pr_debug("PTRACE_SINGLESTEP\n");
-	/* Restart after a signal.  */
-	case PTRACE_CONT:
-		pr_debug("PTRACE_CONT\n");
-		rval = -EIO;
-		if (!valid_signal(data))
-			break;
-
-		if (request == PTRACE_SYSCALL)
-			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		else
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-
-		child->exit_code = data;
-		pr_debug("wakeup_process\n");
-		wake_up_process(child);
-		rval = 0;
-		break;
-
-	/*
-	 * make the child exit.  Best I can do is send it a sigkill.
-	 * perhaps it should be put in the status that it wants to
-	 * exit.
-	 */
-	case PTRACE_KILL:
-		pr_debug("PTRACE_KILL\n");
-		rval = 0;
-		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
-			break;
-		child->exit_code = SIGKILL;
-		wake_up_process(child);
-		break;
-
-	case PTRACE_DETACH: /* detach a process that was attached. */
-		pr_debug("PTRACE_DETACH\n");
-		rval = ptrace_detach(child, data);
-		break;
 	default:
-		/* rval = ptrace_request(child, request, addr, data); noMMU */
-		rval = -EIO;
+		rval = ptrace_request(child, request, addr, data);
 	}
 	return rval;
 }
diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c
index bb8c4b9ccb80..f974ec7aa357 100644
--- a/arch/microblaze/kernel/setup.c
+++ b/arch/microblaze/kernel/setup.c
@@ -22,7 +22,10 @@
 #include <linux/io.h>
 #include <linux/bug.h>
 #include <linux/param.h>
+#include <linux/pci.h>
 #include <linux/cache.h>
+#include <linux/of_platform.h>
+#include <linux/dma-mapping.h>
 #include <asm/cacheflush.h>
 #include <asm/entry.h>
 #include <asm/cpuinfo.h>
@@ -54,14 +57,10 @@ void __init setup_arch(char **cmdline_p)
 
 	microblaze_cache_init();
 
-	invalidate_dcache();
-	enable_dcache();
-
-	invalidate_icache();
-	enable_icache();
-
 	setup_memory();
 
+	xilinx_pci_init();
+
 #if defined(CONFIG_SELFMOD_INTC) || defined(CONFIG_SELFMOD_TIMER)
 	printk(KERN_NOTICE "Self modified code enable\n");
 #endif
@@ -188,3 +187,37 @@ static int microblaze_debugfs_init(void)
 }
 arch_initcall(microblaze_debugfs_init);
 #endif
+
+static int dflt_bus_notify(struct notifier_block *nb,
+				unsigned long action, void *data)
+{
+	struct device *dev = data;
+
+	/* We are only intereted in device addition */
+	if (action != BUS_NOTIFY_ADD_DEVICE)
+		return 0;
+
+	set_dma_ops(dev, &dma_direct_ops);
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block dflt_plat_bus_notifier = {
+	.notifier_call = dflt_bus_notify,
+	.priority = INT_MAX,
+};
+
+static struct notifier_block dflt_of_bus_notifier = {
+	.notifier_call = dflt_bus_notify,
+	.priority = INT_MAX,
+};
+
+static int __init setup_bus_notifier(void)
+{
+	bus_register_notifier(&platform_bus_type, &dflt_plat_bus_notifier);
+	bus_register_notifier(&of_platform_bus_type, &dflt_of_bus_notifier);
+
+	return 0;
+}
+
+arch_initcall(setup_bus_notifier);
diff --git a/arch/microblaze/mm/Makefile b/arch/microblaze/mm/Makefile
index 6c8a924d9e26..09c49ed87235 100644
--- a/arch/microblaze/mm/Makefile
+++ b/arch/microblaze/mm/Makefile
@@ -2,6 +2,6 @@
 # Makefile
 #
 
-obj-y := init.o
+obj-y := consistent.o init.o
 
 obj-$(CONFIG_MMU) += pgtable.o mmu_context.o fault.o
diff --git a/arch/microblaze/mm/consistent.c b/arch/microblaze/mm/consistent.c
new file mode 100644
index 000000000000..a9b443e3fb98
--- /dev/null
+++ b/arch/microblaze/mm/consistent.c
@@ -0,0 +1,246 @@
+/*
+ * Microblaze support for cache consistent memory.
+ * Copyright (C) 2010 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2010 PetaLogix
+ * Copyright (C) 2005 John Williams <jwilliams@itee.uq.edu.au>
+ *
+ * Based on PowerPC version derived from arch/arm/mm/consistent.c
+ * Copyright (C) 2001 Dan Malek (dmalek@jlc.net)
+ * Copyright (C) 2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/stddef.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/bootmem.h>
+#include <linux/highmem.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+
+#include <asm/pgalloc.h>
+#include <linux/io.h>
+#include <linux/hardirq.h>
+#include <asm/mmu_context.h>
+#include <asm/mmu.h>
+#include <linux/uaccess.h>
+#include <asm/pgtable.h>
+#include <asm/cpuinfo.h>
+
+#ifndef CONFIG_MMU
+
+/* I have to use dcache values because I can't relate on ram size */
+#define UNCACHED_SHADOW_MASK (cpuinfo.dcache_high - cpuinfo.dcache_base + 1)
+
+/*
+ * Consistent memory allocators. Used for DMA devices that want to
+ * share uncached memory with the processor core.
+ * My crufty no-MMU approach is simple. In the HW platform we can optionally
+ * mirror the DDR up above the processor cacheable region.  So, memory accessed
+ * in this mirror region will not be cached.  It's alloced from the same
+ * pool as normal memory, but the handle we return is shifted up into the
+ * uncached region.  This will no doubt cause big problems if memory allocated
+ * here is not also freed properly. -- JW
+ */
+void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle)
+{
+	struct page *page, *end, *free;
+	unsigned long order;
+	void *ret, *virt;
+
+	if (in_interrupt())
+		BUG();
+
+	size = PAGE_ALIGN(size);
+	order = get_order(size);
+
+	page = alloc_pages(gfp, order);
+	if (!page)
+		goto no_page;
+
+	/* We could do with a page_to_phys and page_to_bus here. */
+	virt = page_address(page);
+	ret = ioremap(virt_to_phys(virt), size);
+	if (!ret)
+		goto no_remap;
+
+	/*
+	 * Here's the magic!  Note if the uncached shadow is not implemented,
+	 * it's up to the calling code to also test that condition and make
+	 * other arranegments, such as manually flushing the cache and so on.
+	 */
+#ifdef CONFIG_XILINX_UNCACHED_SHADOW
+	ret = (void *)((unsigned) ret | UNCACHED_SHADOW_MASK);
+#endif
+	/* dma_handle is same as physical (shadowed) address */
+	*dma_handle = (dma_addr_t)ret;
+
+	/*
+	 * free wasted pages.  We skip the first page since we know
+	 * that it will have count = 1 and won't require freeing.
+	 * We also mark the pages in use as reserved so that
+	 * remap_page_range works.
+	 */
+	page = virt_to_page(virt);
+	free = page + (size >> PAGE_SHIFT);
+	end  = page + (1 << order);
+
+	for (; page < end; page++) {
+		init_page_count(page);
+		if (page >= free)
+			__free_page(page);
+		else
+			SetPageReserved(page);
+	}
+
+	return ret;
+no_remap:
+	__free_pages(page, order);
+no_page:
+	return NULL;
+}
+
+#else
+
+void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle)
+{
+	int order, err, i;
+	unsigned long page, va, flags;
+	phys_addr_t pa;
+	struct vm_struct *area;
+	void	 *ret;
+
+	if (in_interrupt())
+		BUG();
+
+	/* Only allocate page size areas. */
+	size = PAGE_ALIGN(size);
+	order = get_order(size);
+
+	page = __get_free_pages(gfp, order);
+	if (!page) {
+		BUG();
+		return NULL;
+	}
+
+	/*
+	 * we need to ensure that there are no cachelines in use,
+	 * or worse dirty in this area.
+	 */
+	flush_dcache_range(virt_to_phys(page), virt_to_phys(page) + size);
+
+	/* Allocate some common virtual space to map the new pages. */
+	area = get_vm_area(size, VM_ALLOC);
+	if (area == NULL) {
+		free_pages(page, order);
+		return NULL;
+	}
+	va = (unsigned long) area->addr;
+	ret = (void *)va;
+
+	/* This gives us the real physical address of the first page. */
+	*dma_handle = pa = virt_to_bus((void *)page);
+
+	/* MS: This is the whole magic - use cache inhibit pages */
+	flags = _PAGE_KERNEL | _PAGE_NO_CACHE;
+
+	/*
+	 * Set refcount=1 on all pages in an order>0
+	 * allocation so that vfree() will actually
+	 * free all pages that were allocated.
+	 */
+	if (order > 0) {
+		struct page *rpage = virt_to_page(page);
+		for (i = 1; i < (1 << order); i++)
+			init_page_count(rpage+i);
+	}
+
+	err = 0;
+	for (i = 0; i < size && err == 0; i += PAGE_SIZE)
+		err = map_page(va+i, pa+i, flags);
+
+	if (err) {
+		vfree((void *)va);
+		return NULL;
+	}
+
+	return ret;
+}
+#endif /* CONFIG_MMU */
+EXPORT_SYMBOL(consistent_alloc);
+
+/*
+ * free page(s) as defined by the above mapping.
+ */
+void consistent_free(void *vaddr)
+{
+	if (in_interrupt())
+		BUG();
+
+	/* Clear SHADOW_MASK bit in address, and free as per usual */
+#ifdef CONFIG_XILINX_UNCACHED_SHADOW
+	vaddr = (void *)((unsigned)vaddr & ~UNCACHED_SHADOW_MASK);
+#endif
+	vfree(vaddr);
+}
+EXPORT_SYMBOL(consistent_free);
+
+/*
+ * make an area consistent.
+ */
+void consistent_sync(void *vaddr, size_t size, int direction)
+{
+	unsigned long start;
+	unsigned long end;
+
+	start = (unsigned long)vaddr;
+
+	/* Convert start address back down to unshadowed memory region */
+#ifdef CONFIG_XILINX_UNCACHED_SHADOW
+	start &= ~UNCACHED_SHADOW_MASK;
+#endif
+	end = start + size;
+
+	switch (direction) {
+	case PCI_DMA_NONE:
+		BUG();
+	case PCI_DMA_FROMDEVICE:	/* invalidate only */
+		flush_dcache_range(start, end);
+		break;
+	case PCI_DMA_TODEVICE:		/* writeback only */
+		flush_dcache_range(start, end);
+		break;
+	case PCI_DMA_BIDIRECTIONAL:	/* writeback and invalidate */
+		flush_dcache_range(start, end);
+		break;
+	}
+}
+EXPORT_SYMBOL(consistent_sync);
+
+/*
+ * consistent_sync_page makes memory consistent. identical
+ * to consistent_sync, but takes a struct page instead of a
+ * virtual address
+ */
+void consistent_sync_page(struct page *page, unsigned long offset,
+	size_t size, int direction)
+{
+	unsigned long start = (unsigned long)page_address(page) + offset;
+	consistent_sync((void *)start, size, direction);
+}
+EXPORT_SYMBOL(consistent_sync_page);
diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c
index a57cedf36715..1608e2e1a44a 100644
--- a/arch/microblaze/mm/init.c
+++ b/arch/microblaze/mm/init.c
@@ -23,6 +23,9 @@
 #include <asm/sections.h>
 #include <asm/tlb.h>
 
+/* Use for MMU and noMMU because of PCI generic code */
+int mem_init_done;
+
 #ifndef CONFIG_MMU
 unsigned int __page_offset;
 EXPORT_SYMBOL(__page_offset);
@@ -30,7 +33,6 @@ EXPORT_SYMBOL(__page_offset);
 #else
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 
-int mem_init_done;
 static int init_bootmem_done;
 #endif /* CONFIG_MMU */
 
@@ -193,12 +195,6 @@ void free_initmem(void)
 			(unsigned long)(&__init_end));
 }
 
-/* FIXME from arch/powerpc/mm/mem.c*/
-void show_mem(void)
-{
-	printk(KERN_NOTICE "%s\n", __func__);
-}
-
 void __init mem_init(void)
 {
 	high_memory = (void *)__va(memory_end);
@@ -208,9 +204,7 @@ void __init mem_init(void)
 	printk(KERN_INFO "Memory: %luk/%luk available\n",
 	       nr_free_pages() << (PAGE_SHIFT-10),
 	       num_physpages << (PAGE_SHIFT-10));
-#ifdef CONFIG_MMU
 	mem_init_done = 1;
-#endif
 }
 
 #ifndef CONFIG_MMU
@@ -222,6 +216,10 @@ int ___range_ok(unsigned long addr, unsigned long size)
 }
 EXPORT_SYMBOL(___range_ok);
 
+int page_is_ram(unsigned long pfn)
+{
+	return __range_ok(pfn, 0);
+}
 #else
 int page_is_ram(unsigned long pfn)
 {
@@ -349,4 +347,27 @@ void __init *early_get_page(void)
 	}
 	return p;
 }
+
 #endif /* CONFIG_MMU */
+
+void * __init_refok alloc_maybe_bootmem(size_t size, gfp_t mask)
+{
+	if (mem_init_done)
+		return kmalloc(size, mask);
+	else
+		return alloc_bootmem(size);
+}
+
+void * __init_refok zalloc_maybe_bootmem(size_t size, gfp_t mask)
+{
+	void *p;
+
+	if (mem_init_done)
+		p = kzalloc(size, mask);
+	else {
+		p = alloc_bootmem(size);
+		if (p)
+			memset(p, 0, size);
+	}
+	return p;
+}
diff --git a/arch/microblaze/mm/pgtable.c b/arch/microblaze/mm/pgtable.c
index 2820081b21ab..63a6fd07c48f 100644
--- a/arch/microblaze/mm/pgtable.c
+++ b/arch/microblaze/mm/pgtable.c
@@ -103,7 +103,7 @@ static void __iomem *__ioremap(phys_addr_t addr, unsigned long size,
 		area = get_vm_area(size, VM_IOREMAP);
 		if (area == NULL)
 			return NULL;
-		v = VMALLOC_VMADDR(area->addr);
+		v = (unsigned long) area->addr;
 	} else {
 		v = (ioremap_bot -= size);
 	}
diff --git a/arch/microblaze/pci/Makefile b/arch/microblaze/pci/Makefile
new file mode 100644
index 000000000000..9889cc2e1294
--- /dev/null
+++ b/arch/microblaze/pci/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile
+#
+
+obj-$(CONFIG_PCI)		+= pci_32.o pci-common.o indirect_pci.o iomap.o
+obj-$(CONFIG_PCI_XILINX)	+= xilinx_pci.o
diff --git a/arch/microblaze/pci/indirect_pci.c b/arch/microblaze/pci/indirect_pci.c
new file mode 100644
index 000000000000..25f18f017f21
--- /dev/null
+++ b/arch/microblaze/pci/indirect_pci.c
@@ -0,0 +1,163 @@
+/*
+ * Support for indirect PCI bridges.
+ *
+ * Copyright (C) 1998 Gabriel Paubert.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+
+static int
+indirect_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
+		     int len, u32 *val)
+{
+	struct pci_controller *hose = pci_bus_to_host(bus);
+	volatile void __iomem *cfg_data;
+	u8 cfg_type = 0;
+	u32 bus_no, reg;
+
+	if (hose->indirect_type & INDIRECT_TYPE_NO_PCIE_LINK) {
+		if (bus->number != hose->first_busno)
+			return PCIBIOS_DEVICE_NOT_FOUND;
+		if (devfn != 0)
+			return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	if (hose->indirect_type & INDIRECT_TYPE_SET_CFG_TYPE)
+		if (bus->number != hose->first_busno)
+			cfg_type = 1;
+
+	bus_no = (bus->number == hose->first_busno) ?
+			hose->self_busno : bus->number;
+
+	if (hose->indirect_type & INDIRECT_TYPE_EXT_REG)
+		reg = ((offset & 0xf00) << 16) | (offset & 0xfc);
+	else
+		reg = offset & 0xfc; /* Only 3 bits for function */
+
+	if (hose->indirect_type & INDIRECT_TYPE_BIG_ENDIAN)
+		out_be32(hose->cfg_addr, (0x80000000 | (bus_no << 16) |
+			 (devfn << 8) | reg | cfg_type));
+	else
+		out_le32(hose->cfg_addr, (0x80000000 | (bus_no << 16) |
+			 (devfn << 8) | reg | cfg_type));
+
+	/*
+	 * Note: the caller has already checked that offset is
+	 * suitably aligned and that len is 1, 2 or 4.
+	 */
+	cfg_data = hose->cfg_data + (offset & 3); /* Only 3 bits for function */
+	switch (len) {
+	case 1:
+		*val = in_8(cfg_data);
+		break;
+	case 2:
+		*val = in_le16(cfg_data);
+		break;
+	default:
+		*val = in_le32(cfg_data);
+		break;
+	}
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int
+indirect_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
+		      int len, u32 val)
+{
+	struct pci_controller *hose = pci_bus_to_host(bus);
+	volatile void __iomem *cfg_data;
+	u8 cfg_type = 0;
+	u32 bus_no, reg;
+
+	if (hose->indirect_type & INDIRECT_TYPE_NO_PCIE_LINK) {
+		if (bus->number != hose->first_busno)
+			return PCIBIOS_DEVICE_NOT_FOUND;
+		if (devfn != 0)
+			return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	if (hose->indirect_type & INDIRECT_TYPE_SET_CFG_TYPE)
+		if (bus->number != hose->first_busno)
+			cfg_type = 1;
+
+	bus_no = (bus->number == hose->first_busno) ?
+			hose->self_busno : bus->number;
+
+	if (hose->indirect_type & INDIRECT_TYPE_EXT_REG)
+		reg = ((offset & 0xf00) << 16) | (offset & 0xfc);
+	else
+		reg = offset & 0xfc;
+
+	if (hose->indirect_type & INDIRECT_TYPE_BIG_ENDIAN)
+		out_be32(hose->cfg_addr, (0x80000000 | (bus_no << 16) |
+			 (devfn << 8) | reg | cfg_type));
+	else
+		out_le32(hose->cfg_addr, (0x80000000 | (bus_no << 16) |
+			 (devfn << 8) | reg | cfg_type));
+
+	/* surpress setting of PCI_PRIMARY_BUS */
+	if (hose->indirect_type & INDIRECT_TYPE_SURPRESS_PRIMARY_BUS)
+		if ((offset == PCI_PRIMARY_BUS) &&
+			(bus->number == hose->first_busno))
+			val &= 0xffffff00;
+
+	/* Workaround for PCI_28 Errata in 440EPx/GRx */
+	if ((hose->indirect_type & INDIRECT_TYPE_BROKEN_MRM) &&
+			offset == PCI_CACHE_LINE_SIZE) {
+		val = 0;
+	}
+
+	/*
+	 * Note: the caller has already checked that offset is
+	 * suitably aligned and that len is 1, 2 or 4.
+	 */
+	cfg_data = hose->cfg_data + (offset & 3);
+	switch (len) {
+	case 1:
+		out_8(cfg_data, val);
+		break;
+	case 2:
+		out_le16(cfg_data, val);
+		break;
+	default:
+		out_le32(cfg_data, val);
+		break;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops indirect_pci_ops = {
+	.read = indirect_read_config,
+	.write = indirect_write_config,
+};
+
+void __init
+setup_indirect_pci(struct pci_controller *hose,
+		   resource_size_t cfg_addr,
+		   resource_size_t cfg_data, u32 flags)
+{
+	resource_size_t base = cfg_addr & PAGE_MASK;
+	void __iomem *mbase;
+
+	mbase = ioremap(base, PAGE_SIZE);
+	hose->cfg_addr = mbase + (cfg_addr & ~PAGE_MASK);
+	if ((cfg_data & PAGE_MASK) != base)
+		mbase = ioremap(cfg_data & PAGE_MASK, PAGE_SIZE);
+	hose->cfg_data = mbase + (cfg_data & ~PAGE_MASK);
+	hose->ops = &indirect_pci_ops;
+	hose->indirect_type = flags;
+}
diff --git a/arch/microblaze/pci/iomap.c b/arch/microblaze/pci/iomap.c
new file mode 100644
index 000000000000..3fbf16f4e16c
--- /dev/null
+++ b/arch/microblaze/pci/iomap.c
@@ -0,0 +1,39 @@
+/*
+ * ppc64 "iomap" interface implementation.
+ *
+ * (C) Copyright 2004 Linus Torvalds
+ */
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/mm.h>
+#include <asm/io.h>
+#include <asm/pci-bridge.h>
+
+void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max)
+{
+	resource_size_t start = pci_resource_start(dev, bar);
+	resource_size_t len = pci_resource_len(dev, bar);
+	unsigned long flags = pci_resource_flags(dev, bar);
+
+	if (!len)
+		return NULL;
+	if (max && len > max)
+		len = max;
+	if (flags & IORESOURCE_IO)
+		return ioport_map(start, len);
+	if (flags & IORESOURCE_MEM)
+		return ioremap(start, len);
+	/* What? */
+	return NULL;
+}
+EXPORT_SYMBOL(pci_iomap);
+
+void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
+{
+	if (isa_vaddr_is_ioport(addr))
+		return;
+	if (pcibios_vaddr_is_ioport(addr))
+		return;
+	iounmap(addr);
+}
+EXPORT_SYMBOL(pci_iounmap);
diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c
new file mode 100644
index 000000000000..0be34350d733
--- /dev/null
+++ b/arch/microblaze/pci/pci-common.c
@@ -0,0 +1,1642 @@
+/*
+ * Contains common pci routines for ALL ppc platform
+ * (based on pci_32.c and pci_64.c)
+ *
+ * Port for PPC64 David Engebretsen, IBM Corp.
+ * Contains common pci routines for ppc64 platform, pSeries and iSeries brands.
+ *
+ * Copyright (C) 2003 Anton Blanchard <anton@au.ibm.com>, IBM
+ *   Rework, based on alpha PCI code.
+ *
+ * Common pmac/prep/chrp pci routines. -- Cort
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/mm.h>
+#include <linux/list.h>
+#include <linux/syscalls.h>
+#include <linux/irq.h>
+#include <linux/vmalloc.h>
+
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+#include <asm/byteorder.h>
+
+static DEFINE_SPINLOCK(hose_spinlock);
+LIST_HEAD(hose_list);
+
+/* XXX kill that some day ... */
+static int global_phb_number;		/* Global phb counter */
+
+/* ISA Memory physical address */
+resource_size_t isa_mem_base;
+
+/* Default PCI flags is 0 on ppc32, modified at boot on ppc64 */
+unsigned int pci_flags;
+
+static struct dma_map_ops *pci_dma_ops = &dma_direct_ops;
+
+void set_pci_dma_ops(struct dma_map_ops *dma_ops)
+{
+	pci_dma_ops = dma_ops;
+}
+
+struct dma_map_ops *get_pci_dma_ops(void)
+{
+	return pci_dma_ops;
+}
+EXPORT_SYMBOL(get_pci_dma_ops);
+
+int pci_set_dma_mask(struct pci_dev *dev, u64 mask)
+{
+	return dma_set_mask(&dev->dev, mask);
+}
+
+int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
+{
+	int rc;
+
+	rc = dma_set_mask(&dev->dev, mask);
+	dev->dev.coherent_dma_mask = dev->dma_mask;
+
+	return rc;
+}
+
+struct pci_controller *pcibios_alloc_controller(struct device_node *dev)
+{
+	struct pci_controller *phb;
+
+	phb = zalloc_maybe_bootmem(sizeof(struct pci_controller), GFP_KERNEL);
+	if (!phb)
+		return NULL;
+	spin_lock(&hose_spinlock);
+	phb->global_number = global_phb_number++;
+	list_add_tail(&phb->list_node, &hose_list);
+	spin_unlock(&hose_spinlock);
+	phb->dn = dev;
+	phb->is_dynamic = mem_init_done;
+	return phb;
+}
+
+void pcibios_free_controller(struct pci_controller *phb)
+{
+	spin_lock(&hose_spinlock);
+	list_del(&phb->list_node);
+	spin_unlock(&hose_spinlock);
+
+	if (phb->is_dynamic)
+		kfree(phb);
+}
+
+static resource_size_t pcibios_io_size(const struct pci_controller *hose)
+{
+	return hose->io_resource.end - hose->io_resource.start + 1;
+}
+
+int pcibios_vaddr_is_ioport(void __iomem *address)
+{
+	int ret = 0;
+	struct pci_controller *hose;
+	resource_size_t size;
+
+	spin_lock(&hose_spinlock);
+	list_for_each_entry(hose, &hose_list, list_node) {
+		size = pcibios_io_size(hose);
+		if (address >= hose->io_base_virt &&
+		    address < (hose->io_base_virt + size)) {
+			ret = 1;
+			break;
+		}
+	}
+	spin_unlock(&hose_spinlock);
+	return ret;
+}
+
+unsigned long pci_address_to_pio(phys_addr_t address)
+{
+	struct pci_controller *hose;
+	resource_size_t size;
+	unsigned long ret = ~0;
+
+	spin_lock(&hose_spinlock);
+	list_for_each_entry(hose, &hose_list, list_node) {
+		size = pcibios_io_size(hose);
+		if (address >= hose->io_base_phys &&
+		    address < (hose->io_base_phys + size)) {
+			unsigned long base =
+				(unsigned long)hose->io_base_virt - _IO_BASE;
+			ret = base + (address - hose->io_base_phys);
+			break;
+		}
+	}
+	spin_unlock(&hose_spinlock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pci_address_to_pio);
+
+/*
+ * Return the domain number for this bus.
+ */
+int pci_domain_nr(struct pci_bus *bus)
+{
+	struct pci_controller *hose = pci_bus_to_host(bus);
+
+	return hose->global_number;
+}
+EXPORT_SYMBOL(pci_domain_nr);
+
+/* This routine is meant to be used early during boot, when the
+ * PCI bus numbers have not yet been assigned, and you need to
+ * issue PCI config cycles to an OF device.
+ * It could also be used to "fix" RTAS config cycles if you want
+ * to set pci_assign_all_buses to 1 and still use RTAS for PCI
+ * config cycles.
+ */
+struct pci_controller *pci_find_hose_for_OF_device(struct device_node *node)
+{
+	while (node) {
+		struct pci_controller *hose, *tmp;
+		list_for_each_entry_safe(hose, tmp, &hose_list, list_node)
+			if (hose->dn == node)
+				return hose;
+		node = node->parent;
+	}
+	return NULL;
+}
+
+static ssize_t pci_show_devspec(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct pci_dev *pdev;
+	struct device_node *np;
+
+	pdev = to_pci_dev(dev);
+	np = pci_device_to_OF_node(pdev);
+	if (np == NULL || np->full_name == NULL)
+		return 0;
+	return sprintf(buf, "%s", np->full_name);
+}
+static DEVICE_ATTR(devspec, S_IRUGO, pci_show_devspec, NULL);
+
+/* Add sysfs properties */
+int pcibios_add_platform_entries(struct pci_dev *pdev)
+{
+	return device_create_file(&pdev->dev, &dev_attr_devspec);
+}
+
+char __devinit *pcibios_setup(char *str)
+{
+	return str;
+}
+
+/*
+ * Reads the interrupt pin to determine if interrupt is use by card.
+ * If the interrupt is used, then gets the interrupt line from the
+ * openfirmware and sets it in the pci_dev and pci_config line.
+ */
+int pci_read_irq_line(struct pci_dev *pci_dev)
+{
+	struct of_irq oirq;
+	unsigned int virq;
+
+	/* The current device-tree that iSeries generates from the HV
+	 * PCI informations doesn't contain proper interrupt routing,
+	 * and all the fallback would do is print out crap, so we
+	 * don't attempt to resolve the interrupts here at all, some
+	 * iSeries specific fixup does it.
+	 *
+	 * In the long run, we will hopefully fix the generated device-tree
+	 * instead.
+	 */
+	pr_debug("PCI: Try to map irq for %s...\n", pci_name(pci_dev));
+
+#ifdef DEBUG
+	memset(&oirq, 0xff, sizeof(oirq));
+#endif
+	/* Try to get a mapping from the device-tree */
+	if (of_irq_map_pci(pci_dev, &oirq)) {
+		u8 line, pin;
+
+		/* If that fails, lets fallback to what is in the config
+		 * space and map that through the default controller. We
+		 * also set the type to level low since that's what PCI
+		 * interrupts are. If your platform does differently, then
+		 * either provide a proper interrupt tree or don't use this
+		 * function.
+		 */
+		if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_PIN, &pin))
+			return -1;
+		if (pin == 0)
+			return -1;
+		if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_LINE, &line) ||
+		    line == 0xff || line == 0) {
+			return -1;
+		}
+		pr_debug(" No map ! Using line %d (pin %d) from PCI config\n",
+			 line, pin);
+
+		virq = irq_create_mapping(NULL, line);
+		if (virq != NO_IRQ)
+			set_irq_type(virq, IRQ_TYPE_LEVEL_LOW);
+	} else {
+		pr_debug(" Got one, spec %d cells (0x%08x 0x%08x...) on %s\n",
+			 oirq.size, oirq.specifier[0], oirq.specifier[1],
+			 oirq.controller ? oirq.controller->full_name :
+			 "<default>");
+
+		virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
+					     oirq.size);
+	}
+	if (virq == NO_IRQ) {
+		pr_debug(" Failed to map !\n");
+		return -1;
+	}
+
+	pr_debug(" Mapped to linux irq %d\n", virq);
+
+	pci_dev->irq = virq;
+
+	return 0;
+}
+EXPORT_SYMBOL(pci_read_irq_line);
+
+/*
+ * Platform support for /proc/bus/pci/X/Y mmap()s,
+ * modelled on the sparc64 implementation by Dave Miller.
+ *  -- paulus.
+ */
+
+/*
+ * Adjust vm_pgoff of VMA such that it is the physical page offset
+ * corresponding to the 32-bit pci bus offset for DEV requested by the user.
+ *
+ * Basically, the user finds the base address for his device which he wishes
+ * to mmap.  They read the 32-bit value from the config space base register,
+ * add whatever PAGE_SIZE multiple offset they wish, and feed this into the
+ * offset parameter of mmap on /proc/bus/pci/XXX for that device.
+ *
+ * Returns negative error code on failure, zero on success.
+ */
+static struct resource *__pci_mmap_make_offset(struct pci_dev *dev,
+					       resource_size_t *offset,
+					       enum pci_mmap_state mmap_state)
+{
+	struct pci_controller *hose = pci_bus_to_host(dev->bus);
+	unsigned long io_offset = 0;
+	int i, res_bit;
+
+	if (hose == 0)
+		return NULL;		/* should never happen */
+
+	/* If memory, add on the PCI bridge address offset */
+	if (mmap_state == pci_mmap_mem) {
+#if 0 /* See comment in pci_resource_to_user() for why this is disabled */
+		*offset += hose->pci_mem_offset;
+#endif
+		res_bit = IORESOURCE_MEM;
+	} else {
+		io_offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+		*offset += io_offset;
+		res_bit = IORESOURCE_IO;
+	}
+
+	/*
+	 * Check that the offset requested corresponds to one of the
+	 * resources of the device.
+	 */
+	for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
+		struct resource *rp = &dev->resource[i];
+		int flags = rp->flags;
+
+		/* treat ROM as memory (should be already) */
+		if (i == PCI_ROM_RESOURCE)
+			flags |= IORESOURCE_MEM;
+
+		/* Active and same type? */
+		if ((flags & res_bit) == 0)
+			continue;
+
+		/* In the range of this resource? */
+		if (*offset < (rp->start & PAGE_MASK) || *offset > rp->end)
+			continue;
+
+		/* found it! construct the final physical address */
+		if (mmap_state == pci_mmap_io)
+			*offset += hose->io_base_phys - io_offset;
+		return rp;
+	}
+
+	return NULL;
+}
+
+/*
+ * Set vm_page_prot of VMA, as appropriate for this architecture, for a pci
+ * device mapping.
+ */
+static pgprot_t __pci_mmap_set_pgprot(struct pci_dev *dev, struct resource *rp,
+				      pgprot_t protection,
+				      enum pci_mmap_state mmap_state,
+				      int write_combine)
+{
+	pgprot_t prot = protection;
+
+	/* Write combine is always 0 on non-memory space mappings. On
+	 * memory space, if the user didn't pass 1, we check for a
+	 * "prefetchable" resource. This is a bit hackish, but we use
+	 * this to workaround the inability of /sysfs to provide a write
+	 * combine bit
+	 */
+	if (mmap_state != pci_mmap_mem)
+		write_combine = 0;
+	else if (write_combine == 0) {
+		if (rp->flags & IORESOURCE_PREFETCH)
+			write_combine = 1;
+	}
+
+	return pgprot_noncached(prot);
+}
+
+/*
+ * This one is used by /dev/mem and fbdev who have no clue about the
+ * PCI device, it tries to find the PCI device first and calls the
+ * above routine
+ */
+pgprot_t pci_phys_mem_access_prot(struct file *file,
+				  unsigned long pfn,
+				  unsigned long size,
+				  pgprot_t prot)
+{
+	struct pci_dev *pdev = NULL;
+	struct resource *found = NULL;
+	resource_size_t offset = ((resource_size_t)pfn) << PAGE_SHIFT;
+	int i;
+
+	if (page_is_ram(pfn))
+		return prot;
+
+	prot = pgprot_noncached(prot);
+	for_each_pci_dev(pdev) {
+		for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
+			struct resource *rp = &pdev->resource[i];
+			int flags = rp->flags;
+
+			/* Active and same type? */
+			if ((flags & IORESOURCE_MEM) == 0)
+				continue;
+			/* In the range of this resource? */
+			if (offset < (rp->start & PAGE_MASK) ||
+			    offset > rp->end)
+				continue;
+			found = rp;
+			break;
+		}
+		if (found)
+			break;
+	}
+	if (found) {
+		if (found->flags & IORESOURCE_PREFETCH)
+			prot = pgprot_noncached_wc(prot);
+		pci_dev_put(pdev);
+	}
+
+	pr_debug("PCI: Non-PCI map for %llx, prot: %lx\n",
+		 (unsigned long long)offset, pgprot_val(prot));
+
+	return prot;
+}
+
+/*
+ * Perform the actual remap of the pages for a PCI device mapping, as
+ * appropriate for this architecture.  The region in the process to map
+ * is described by vm_start and vm_end members of VMA, the base physical
+ * address is found in vm_pgoff.
+ * The pci device structure is provided so that architectures may make mapping
+ * decisions on a per-device or per-bus basis.
+ *
+ * Returns a negative error code on failure, zero on success.
+ */
+int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+			enum pci_mmap_state mmap_state, int write_combine)
+{
+	resource_size_t offset =
+		((resource_size_t)vma->vm_pgoff) << PAGE_SHIFT;
+	struct resource *rp;
+	int ret;
+
+	rp = __pci_mmap_make_offset(dev, &offset, mmap_state);
+	if (rp == NULL)
+		return -EINVAL;
+
+	vma->vm_pgoff = offset >> PAGE_SHIFT;
+	vma->vm_page_prot = __pci_mmap_set_pgprot(dev, rp,
+						  vma->vm_page_prot,
+						  mmap_state, write_combine);
+
+	ret = remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
+			       vma->vm_end - vma->vm_start, vma->vm_page_prot);
+
+	return ret;
+}
+
+/* This provides legacy IO read access on a bus */
+int pci_legacy_read(struct pci_bus *bus, loff_t port, u32 *val, size_t size)
+{
+	unsigned long offset;
+	struct pci_controller *hose = pci_bus_to_host(bus);
+	struct resource *rp = &hose->io_resource;
+	void __iomem *addr;
+
+	/* Check if port can be supported by that bus. We only check
+	 * the ranges of the PHB though, not the bus itself as the rules
+	 * for forwarding legacy cycles down bridges are not our problem
+	 * here. So if the host bridge supports it, we do it.
+	 */
+	offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+	offset += port;
+
+	if (!(rp->flags & IORESOURCE_IO))
+		return -ENXIO;
+	if (offset < rp->start || (offset + size) > rp->end)
+		return -ENXIO;
+	addr = hose->io_base_virt + port;
+
+	switch (size) {
+	case 1:
+		*((u8 *)val) = in_8(addr);
+		return 1;
+	case 2:
+		if (port & 1)
+			return -EINVAL;
+		*((u16 *)val) = in_le16(addr);
+		return 2;
+	case 4:
+		if (port & 3)
+			return -EINVAL;
+		*((u32 *)val) = in_le32(addr);
+		return 4;
+	}
+	return -EINVAL;
+}
+
+/* This provides legacy IO write access on a bus */
+int pci_legacy_write(struct pci_bus *bus, loff_t port, u32 val, size_t size)
+{
+	unsigned long offset;
+	struct pci_controller *hose = pci_bus_to_host(bus);
+	struct resource *rp = &hose->io_resource;
+	void __iomem *addr;
+
+	/* Check if port can be supported by that bus. We only check
+	 * the ranges of the PHB though, not the bus itself as the rules
+	 * for forwarding legacy cycles down bridges are not our problem
+	 * here. So if the host bridge supports it, we do it.
+	 */
+	offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+	offset += port;
+
+	if (!(rp->flags & IORESOURCE_IO))
+		return -ENXIO;
+	if (offset < rp->start || (offset + size) > rp->end)
+		return -ENXIO;
+	addr = hose->io_base_virt + port;
+
+	/* WARNING: The generic code is idiotic. It gets passed a pointer
+	 * to what can be a 1, 2 or 4 byte quantity and always reads that
+	 * as a u32, which means that we have to correct the location of
+	 * the data read within those 32 bits for size 1 and 2
+	 */
+	switch (size) {
+	case 1:
+		out_8(addr, val >> 24);
+		return 1;
+	case 2:
+		if (port & 1)
+			return -EINVAL;
+		out_le16(addr, val >> 16);
+		return 2;
+	case 4:
+		if (port & 3)
+			return -EINVAL;
+		out_le32(addr, val);
+		return 4;
+	}
+	return -EINVAL;
+}
+
+/* This provides legacy IO or memory mmap access on a bus */
+int pci_mmap_legacy_page_range(struct pci_bus *bus,
+			       struct vm_area_struct *vma,
+			       enum pci_mmap_state mmap_state)
+{
+	struct pci_controller *hose = pci_bus_to_host(bus);
+	resource_size_t offset =
+		((resource_size_t)vma->vm_pgoff) << PAGE_SHIFT;
+	resource_size_t size = vma->vm_end - vma->vm_start;
+	struct resource *rp;
+
+	pr_debug("pci_mmap_legacy_page_range(%04x:%02x, %s @%llx..%llx)\n",
+		 pci_domain_nr(bus), bus->number,
+		 mmap_state == pci_mmap_mem ? "MEM" : "IO",
+		 (unsigned long long)offset,
+		 (unsigned long long)(offset + size - 1));
+
+	if (mmap_state == pci_mmap_mem) {
+		/* Hack alert !
+		 *
+		 * Because X is lame and can fail starting if it gets an error
+		 * trying to mmap legacy_mem (instead of just moving on without
+		 * legacy memory access) we fake it here by giving it anonymous
+		 * memory, effectively behaving just like /dev/zero
+		 */
+		if ((offset + size) > hose->isa_mem_size) {
+#ifdef CONFIG_MMU
+			printk(KERN_DEBUG
+				"Process %s (pid:%d) mapped non-existing PCI"
+				"legacy memory for 0%04x:%02x\n",
+				current->comm, current->pid, pci_domain_nr(bus),
+								bus->number);
+#endif
+			if (vma->vm_flags & VM_SHARED)
+				return shmem_zero_setup(vma);
+			return 0;
+		}
+		offset += hose->isa_mem_phys;
+	} else {
+		unsigned long io_offset = (unsigned long)hose->io_base_virt - \
+								_IO_BASE;
+		unsigned long roffset = offset + io_offset;
+		rp = &hose->io_resource;
+		if (!(rp->flags & IORESOURCE_IO))
+			return -ENXIO;
+		if (roffset < rp->start || (roffset + size) > rp->end)
+			return -ENXIO;
+		offset += hose->io_base_phys;
+	}
+	pr_debug(" -> mapping phys %llx\n", (unsigned long long)offset);
+
+	vma->vm_pgoff = offset >> PAGE_SHIFT;
+	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+	return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
+			       vma->vm_end - vma->vm_start,
+			       vma->vm_page_prot);
+}
+
+void pci_resource_to_user(const struct pci_dev *dev, int bar,
+			  const struct resource *rsrc,
+			  resource_size_t *start, resource_size_t *end)
+{
+	struct pci_controller *hose = pci_bus_to_host(dev->bus);
+	resource_size_t offset = 0;
+
+	if (hose == NULL)
+		return;
+
+	if (rsrc->flags & IORESOURCE_IO)
+		offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+
+	/* We pass a fully fixed up address to userland for MMIO instead of
+	 * a BAR value because X is lame and expects to be able to use that
+	 * to pass to /dev/mem !
+	 *
+	 * That means that we'll have potentially 64 bits values where some
+	 * userland apps only expect 32 (like X itself since it thinks only
+	 * Sparc has 64 bits MMIO) but if we don't do that, we break it on
+	 * 32 bits CHRPs :-(
+	 *
+	 * Hopefully, the sysfs insterface is immune to that gunk. Once X
+	 * has been fixed (and the fix spread enough), we can re-enable the
+	 * 2 lines below and pass down a BAR value to userland. In that case
+	 * we'll also have to re-enable the matching code in
+	 * __pci_mmap_make_offset().
+	 *
+	 * BenH.
+	 */
+#if 0
+	else if (rsrc->flags & IORESOURCE_MEM)
+		offset = hose->pci_mem_offset;
+#endif
+
+	*start = rsrc->start - offset;
+	*end = rsrc->end - offset;
+}
+
+/**
+ * pci_process_bridge_OF_ranges - Parse PCI bridge resources from device tree
+ * @hose: newly allocated pci_controller to be setup
+ * @dev: device node of the host bridge
+ * @primary: set if primary bus (32 bits only, soon to be deprecated)
+ *
+ * This function will parse the "ranges" property of a PCI host bridge device
+ * node and setup the resource mapping of a pci controller based on its
+ * content.
+ *
+ * Life would be boring if it wasn't for a few issues that we have to deal
+ * with here:
+ *
+ *   - We can only cope with one IO space range and up to 3 Memory space
+ *     ranges. However, some machines (thanks Apple !) tend to split their
+ *     space into lots of small contiguous ranges. So we have to coalesce.
+ *
+ *   - We can only cope with all memory ranges having the same offset
+ *     between CPU addresses and PCI addresses. Unfortunately, some bridges
+ *     are setup for a large 1:1 mapping along with a small "window" which
+ *     maps PCI address 0 to some arbitrary high address of the CPU space in
+ *     order to give access to the ISA memory hole.
+ *     The way out of here that I've chosen for now is to always set the
+ *     offset based on the first resource found, then override it if we
+ *     have a different offset and the previous was set by an ISA hole.
+ *
+ *   - Some busses have IO space not starting at 0, which causes trouble with
+ *     the way we do our IO resource renumbering. The code somewhat deals with
+ *     it for 64 bits but I would expect problems on 32 bits.
+ *
+ *   - Some 32 bits platforms such as 4xx can have physical space larger than
+ *     32 bits so we need to use 64 bits values for the parsing
+ */
+void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose,
+					    struct device_node *dev,
+					    int primary)
+{
+	const u32 *ranges;
+	int rlen;
+	int pna = of_n_addr_cells(dev);
+	int np = pna + 5;
+	int memno = 0, isa_hole = -1;
+	u32 pci_space;
+	unsigned long long pci_addr, cpu_addr, pci_next, cpu_next, size;
+	unsigned long long isa_mb = 0;
+	struct resource *res;
+
+	printk(KERN_INFO "PCI host bridge %s %s ranges:\n",
+	       dev->full_name, primary ? "(primary)" : "");
+
+	/* Get ranges property */
+	ranges = of_get_property(dev, "ranges", &rlen);
+	if (ranges == NULL)
+		return;
+
+	/* Parse it */
+	pr_debug("Parsing ranges property...\n");
+	while ((rlen -= np * 4) >= 0) {
+		/* Read next ranges element */
+		pci_space = ranges[0];
+		pci_addr = of_read_number(ranges + 1, 2);
+		cpu_addr = of_translate_address(dev, ranges + 3);
+		size = of_read_number(ranges + pna + 3, 2);
+
+		pr_debug("pci_space: 0x%08x pci_addr:0x%016llx "
+				"cpu_addr:0x%016llx size:0x%016llx\n",
+					pci_space, pci_addr, cpu_addr, size);
+
+		ranges += np;
+
+		/* If we failed translation or got a zero-sized region
+		 * (some FW try to feed us with non sensical zero sized regions
+		 * such as power3 which look like some kind of attempt
+		 * at exposing the VGA memory hole)
+		 */
+		if (cpu_addr == OF_BAD_ADDR || size == 0)
+			continue;
+
+		/* Now consume following elements while they are contiguous */
+		for (; rlen >= np * sizeof(u32);
+		     ranges += np, rlen -= np * 4) {
+			if (ranges[0] != pci_space)
+				break;
+			pci_next = of_read_number(ranges + 1, 2);
+			cpu_next = of_translate_address(dev, ranges + 3);
+			if (pci_next != pci_addr + size ||
+			    cpu_next != cpu_addr + size)
+				break;
+			size += of_read_number(ranges + pna + 3, 2);
+		}
+
+		/* Act based on address space type */
+		res = NULL;
+		switch ((pci_space >> 24) & 0x3) {
+		case 1:		/* PCI IO space */
+			printk(KERN_INFO
+			       "  IO 0x%016llx..0x%016llx -> 0x%016llx\n",
+			       cpu_addr, cpu_addr + size - 1, pci_addr);
+
+			/* We support only one IO range */
+			if (hose->pci_io_size) {
+				printk(KERN_INFO
+				       " \\--> Skipped (too many) !\n");
+				continue;
+			}
+			/* On 32 bits, limit I/O space to 16MB */
+			if (size > 0x01000000)
+				size = 0x01000000;
+
+			/* 32 bits needs to map IOs here */
+			hose->io_base_virt = ioremap(cpu_addr, size);
+
+			/* Expect trouble if pci_addr is not 0 */
+			if (primary)
+				isa_io_base =
+					(unsigned long)hose->io_base_virt;
+			/* pci_io_size and io_base_phys always represent IO
+			 * space starting at 0 so we factor in pci_addr
+			 */
+			hose->pci_io_size = pci_addr + size;
+			hose->io_base_phys = cpu_addr - pci_addr;
+
+			/* Build resource */
+			res = &hose->io_resource;
+			res->flags = IORESOURCE_IO;
+			res->start = pci_addr;
+			break;
+		case 2:		/* PCI Memory space */
+		case 3:		/* PCI 64 bits Memory space */
+			printk(KERN_INFO
+			       " MEM 0x%016llx..0x%016llx -> 0x%016llx %s\n",
+			       cpu_addr, cpu_addr + size - 1, pci_addr,
+			       (pci_space & 0x40000000) ? "Prefetch" : "");
+
+			/* We support only 3 memory ranges */
+			if (memno >= 3) {
+				printk(KERN_INFO
+				       " \\--> Skipped (too many) !\n");
+				continue;
+			}
+			/* Handles ISA memory hole space here */
+			if (pci_addr == 0) {
+				isa_mb = cpu_addr;
+				isa_hole = memno;
+				if (primary || isa_mem_base == 0)
+					isa_mem_base = cpu_addr;
+				hose->isa_mem_phys = cpu_addr;
+				hose->isa_mem_size = size;
+			}
+
+			/* We get the PCI/Mem offset from the first range or
+			 * the, current one if the offset came from an ISA
+			 * hole. If they don't match, bugger.
+			 */
+			if (memno == 0 ||
+			    (isa_hole >= 0 && pci_addr != 0 &&
+			     hose->pci_mem_offset == isa_mb))
+				hose->pci_mem_offset = cpu_addr - pci_addr;
+			else if (pci_addr != 0 &&
+				 hose->pci_mem_offset != cpu_addr - pci_addr) {
+				printk(KERN_INFO
+				       " \\--> Skipped (offset mismatch) !\n");
+				continue;
+			}
+
+			/* Build resource */
+			res = &hose->mem_resources[memno++];
+			res->flags = IORESOURCE_MEM;
+			if (pci_space & 0x40000000)
+				res->flags |= IORESOURCE_PREFETCH;
+			res->start = cpu_addr;
+			break;
+		}
+		if (res != NULL) {
+			res->name = dev->full_name;
+			res->end = res->start + size - 1;
+			res->parent = NULL;
+			res->sibling = NULL;
+			res->child = NULL;
+		}
+	}
+
+	/* If there's an ISA hole and the pci_mem_offset is -not- matching
+	 * the ISA hole offset, then we need to remove the ISA hole from
+	 * the resource list for that brige
+	 */
+	if (isa_hole >= 0 && hose->pci_mem_offset != isa_mb) {
+		unsigned int next = isa_hole + 1;
+		printk(KERN_INFO " Removing ISA hole at 0x%016llx\n", isa_mb);
+		if (next < memno)
+			memmove(&hose->mem_resources[isa_hole],
+				&hose->mem_resources[next],
+				sizeof(struct resource) * (memno - next));
+		hose->mem_resources[--memno].flags = 0;
+	}
+}
+
+/* Decide whether to display the domain number in /proc */
+int pci_proc_domain(struct pci_bus *bus)
+{
+	struct pci_controller *hose = pci_bus_to_host(bus);
+
+	if (!(pci_flags & PCI_ENABLE_PROC_DOMAINS))
+		return 0;
+	if (pci_flags & PCI_COMPAT_DOMAIN_0)
+		return hose->global_number != 0;
+	return 1;
+}
+
+void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
+			     struct resource *res)
+{
+	resource_size_t offset = 0, mask = (resource_size_t)-1;
+	struct pci_controller *hose = pci_bus_to_host(dev->bus);
+
+	if (!hose)
+		return;
+	if (res->flags & IORESOURCE_IO) {
+		offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+		mask = 0xffffffffu;
+	} else if (res->flags & IORESOURCE_MEM)
+		offset = hose->pci_mem_offset;
+
+	region->start = (res->start - offset) & mask;
+	region->end = (res->end - offset) & mask;
+}
+EXPORT_SYMBOL(pcibios_resource_to_bus);
+
+void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
+			     struct pci_bus_region *region)
+{
+	resource_size_t offset = 0, mask = (resource_size_t)-1;
+	struct pci_controller *hose = pci_bus_to_host(dev->bus);
+
+	if (!hose)
+		return;
+	if (res->flags & IORESOURCE_IO) {
+		offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+		mask = 0xffffffffu;
+	} else if (res->flags & IORESOURCE_MEM)
+		offset = hose->pci_mem_offset;
+	res->start = (region->start + offset) & mask;
+	res->end = (region->end + offset) & mask;
+}
+EXPORT_SYMBOL(pcibios_bus_to_resource);
+
+/* Fixup a bus resource into a linux resource */
+static void __devinit fixup_resource(struct resource *res, struct pci_dev *dev)
+{
+	struct pci_controller *hose = pci_bus_to_host(dev->bus);
+	resource_size_t offset = 0, mask = (resource_size_t)-1;
+
+	if (res->flags & IORESOURCE_IO) {
+		offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+		mask = 0xffffffffu;
+	} else if (res->flags & IORESOURCE_MEM)
+		offset = hose->pci_mem_offset;
+
+	res->start = (res->start + offset) & mask;
+	res->end = (res->end + offset) & mask;
+}
+
+/* This header fixup will do the resource fixup for all devices as they are
+ * probed, but not for bridge ranges
+ */
+static void __devinit pcibios_fixup_resources(struct pci_dev *dev)
+{
+	struct pci_controller *hose = pci_bus_to_host(dev->bus);
+	int i;
+
+	if (!hose) {
+		printk(KERN_ERR "No host bridge for PCI dev %s !\n",
+		       pci_name(dev));
+		return;
+	}
+	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+		struct resource *res = dev->resource + i;
+		if (!res->flags)
+			continue;
+		/* On platforms that have PCI_PROBE_ONLY set, we don't
+		 * consider 0 as an unassigned BAR value. It's technically
+		 * a valid value, but linux doesn't like it... so when we can
+		 * re-assign things, we do so, but if we can't, we keep it
+		 * around and hope for the best...
+		 */
+		if (res->start == 0 && !(pci_flags & PCI_PROBE_ONLY)) {
+			pr_debug("PCI:%s Resource %d %016llx-%016llx [%x]" \
+							"is unassigned\n",
+				 pci_name(dev), i,
+				 (unsigned long long)res->start,
+				 (unsigned long long)res->end,
+				 (unsigned int)res->flags);
+			res->end -= res->start;
+			res->start = 0;
+			res->flags |= IORESOURCE_UNSET;
+			continue;
+		}
+
+		pr_debug("PCI:%s Resource %d %016llx-%016llx [%x] fixup...\n",
+			 pci_name(dev), i,
+			 (unsigned long long)res->start,\
+			 (unsigned long long)res->end,
+			 (unsigned int)res->flags);
+
+		fixup_resource(res, dev);
+
+		pr_debug("PCI:%s            %016llx-%016llx\n",
+			 pci_name(dev),
+			 (unsigned long long)res->start,
+			 (unsigned long long)res->end);
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pcibios_fixup_resources);
+
+/* This function tries to figure out if a bridge resource has been initialized
+ * by the firmware or not. It doesn't have to be absolutely bullet proof, but
+ * things go more smoothly when it gets it right. It should covers cases such
+ * as Apple "closed" bridge resources and bare-metal pSeries unassigned bridges
+ */
+static int __devinit pcibios_uninitialized_bridge_resource(struct pci_bus *bus,
+							   struct resource *res)
+{
+	struct pci_controller *hose = pci_bus_to_host(bus);
+	struct pci_dev *dev = bus->self;
+	resource_size_t offset;
+	u16 command;
+	int i;
+
+	/* We don't do anything if PCI_PROBE_ONLY is set */
+	if (pci_flags & PCI_PROBE_ONLY)
+		return 0;
+
+	/* Job is a bit different between memory and IO */
+	if (res->flags & IORESOURCE_MEM) {
+		/* If the BAR is non-0 (res != pci_mem_offset) then it's
+		 * probably been initialized by somebody
+		 */
+		if (res->start != hose->pci_mem_offset)
+			return 0;
+
+		/* The BAR is 0, let's check if memory decoding is enabled on
+		 * the bridge. If not, we consider it unassigned
+		 */
+		pci_read_config_word(dev, PCI_COMMAND, &command);
+		if ((command & PCI_COMMAND_MEMORY) == 0)
+			return 1;
+
+		/* Memory decoding is enabled and the BAR is 0. If any of
+		 * the bridge resources covers that starting address (0 then
+		 * it's good enough for us for memory
+		 */
+		for (i = 0; i < 3; i++) {
+			if ((hose->mem_resources[i].flags & IORESOURCE_MEM) &&
+			   hose->mem_resources[i].start == hose->pci_mem_offset)
+				return 0;
+		}
+
+		/* Well, it starts at 0 and we know it will collide so we may as
+		 * well consider it as unassigned. That covers the Apple case.
+		 */
+		return 1;
+	} else {
+		/* If the BAR is non-0, then we consider it assigned */
+		offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+		if (((res->start - offset) & 0xfffffffful) != 0)
+			return 0;
+
+		/* Here, we are a bit different than memory as typically IO
+		 * space starting at low addresses -is- valid. What we do
+		 * instead if that we consider as unassigned anything that
+		 * doesn't have IO enabled in the PCI command register,
+		 * and that's it.
+		 */
+		pci_read_config_word(dev, PCI_COMMAND, &command);
+		if (command & PCI_COMMAND_IO)
+			return 0;
+
+		/* It's starting at 0 and IO is disabled in the bridge, consider
+		 * it unassigned
+		 */
+		return 1;
+	}
+}
+
+/* Fixup resources of a PCI<->PCI bridge */
+static void __devinit pcibios_fixup_bridge(struct pci_bus *bus)
+{
+	struct resource *res;
+	int i;
+
+	struct pci_dev *dev = bus->self;
+
+	for (i = 0; i < PCI_BUS_NUM_RESOURCES; ++i) {
+		res = bus->resource[i];
+		if (!res)
+			continue;
+		if (!res->flags)
+			continue;
+		if (i >= 3 && bus->self->transparent)
+			continue;
+
+		pr_debug("PCI:%s Bus rsrc %d %016llx-%016llx [%x] fixup...\n",
+			 pci_name(dev), i,
+			 (unsigned long long)res->start,\
+			 (unsigned long long)res->end,
+			 (unsigned int)res->flags);
+
+		/* Perform fixup */
+		fixup_resource(res, dev);
+
+		/* Try to detect uninitialized P2P bridge resources,
+		 * and clear them out so they get re-assigned later
+		 */
+		if (pcibios_uninitialized_bridge_resource(bus, res)) {
+			res->flags = 0;
+			pr_debug("PCI:%s            (unassigned)\n",
+								pci_name(dev));
+		} else {
+			pr_debug("PCI:%s            %016llx-%016llx\n",
+				 pci_name(dev),
+				 (unsigned long long)res->start,
+				 (unsigned long long)res->end);
+		}
+	}
+}
+
+void __devinit pcibios_setup_bus_self(struct pci_bus *bus)
+{
+	/* Fix up the bus resources for P2P bridges */
+	if (bus->self != NULL)
+		pcibios_fixup_bridge(bus);
+}
+
+void __devinit pcibios_setup_bus_devices(struct pci_bus *bus)
+{
+	struct pci_dev *dev;
+
+	pr_debug("PCI: Fixup bus devices %d (%s)\n",
+		 bus->number, bus->self ? pci_name(bus->self) : "PHB");
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		struct dev_archdata *sd = &dev->dev.archdata;
+
+		/* Setup OF node pointer in archdata */
+		sd->of_node = pci_device_to_OF_node(dev);
+
+		/* Fixup NUMA node as it may not be setup yet by the generic
+		 * code and is needed by the DMA init
+		 */
+		set_dev_node(&dev->dev, pcibus_to_node(dev->bus));
+
+		/* Hook up default DMA ops */
+		sd->dma_ops = pci_dma_ops;
+		sd->dma_data = (void *)PCI_DRAM_OFFSET;
+
+		/* Read default IRQs and fixup if necessary */
+		pci_read_irq_line(dev);
+	}
+}
+
+void __devinit pcibios_fixup_bus(struct pci_bus *bus)
+{
+	/* When called from the generic PCI probe, read PCI<->PCI bridge
+	 * bases. This is -not- called when generating the PCI tree from
+	 * the OF device-tree.
+	 */
+	if (bus->self != NULL)
+		pci_read_bridge_bases(bus);
+
+	/* Now fixup the bus bus */
+	pcibios_setup_bus_self(bus);
+
+	/* Now fixup devices on that bus */
+	pcibios_setup_bus_devices(bus);
+}
+EXPORT_SYMBOL(pcibios_fixup_bus);
+
+static int skip_isa_ioresource_align(struct pci_dev *dev)
+{
+	if ((pci_flags & PCI_CAN_SKIP_ISA_ALIGN) &&
+	    !(dev->bus->bridge_ctl & PCI_BRIDGE_CTL_ISA))
+		return 1;
+	return 0;
+}
+
+/*
+ * We need to avoid collisions with `mirrored' VGA ports
+ * and other strange ISA hardware, so we always want the
+ * addresses to be allocated in the 0x000-0x0ff region
+ * modulo 0x400.
+ *
+ * Why? Because some silly external IO cards only decode
+ * the low 10 bits of the IO address. The 0x00-0xff region
+ * is reserved for motherboard devices that decode all 16
+ * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
+ * but we want to try to avoid allocating at 0x2900-0x2bff
+ * which might have be mirrored at 0x0100-0x03ff..
+ */
+void pcibios_align_resource(void *data, struct resource *res,
+				resource_size_t size, resource_size_t align)
+{
+	struct pci_dev *dev = data;
+
+	if (res->flags & IORESOURCE_IO) {
+		resource_size_t start = res->start;
+
+		if (skip_isa_ioresource_align(dev))
+			return;
+		if (start & 0x300) {
+			start = (start + 0x3ff) & ~0x3ff;
+			res->start = start;
+		}
+	}
+}
+EXPORT_SYMBOL(pcibios_align_resource);
+
+/*
+ * Reparent resource children of pr that conflict with res
+ * under res, and make res replace those children.
+ */
+static int __init reparent_resources(struct resource *parent,
+				     struct resource *res)
+{
+	struct resource *p, **pp;
+	struct resource **firstpp = NULL;
+
+	for (pp = &parent->child; (p = *pp) != NULL; pp = &p->sibling) {
+		if (p->end < res->start)
+			continue;
+		if (res->end < p->start)
+			break;
+		if (p->start < res->start || p->end > res->end)
+			return -1;	/* not completely contained */
+		if (firstpp == NULL)
+			firstpp = pp;
+	}
+	if (firstpp == NULL)
+		return -1;	/* didn't find any conflicting entries? */
+	res->parent = parent;
+	res->child = *firstpp;
+	res->sibling = *pp;
+	*firstpp = res;
+	*pp = NULL;
+	for (p = res->child; p != NULL; p = p->sibling) {
+		p->parent = res;
+		pr_debug("PCI: Reparented %s [%llx..%llx] under %s\n",
+			 p->name,
+			 (unsigned long long)p->start,
+			 (unsigned long long)p->end, res->name);
+	}
+	return 0;
+}
+
+/*
+ *  Handle resources of PCI devices.  If the world were perfect, we could
+ *  just allocate all the resource regions and do nothing more.  It isn't.
+ *  On the other hand, we cannot just re-allocate all devices, as it would
+ *  require us to know lots of host bridge internals.  So we attempt to
+ *  keep as much of the original configuration as possible, but tweak it
+ *  when it's found to be wrong.
+ *
+ *  Known BIOS problems we have to work around:
+ *	- I/O or memory regions not configured
+ *	- regions configured, but not enabled in the command register
+ *	- bogus I/O addresses above 64K used
+ *	- expansion ROMs left enabled (this may sound harmless, but given
+ *	  the fact the PCI specs explicitly allow address decoders to be
+ *	  shared between expansion ROMs and other resource regions, it's
+ *	  at least dangerous)
+ *
+ *  Our solution:
+ *	(1) Allocate resources for all buses behind PCI-to-PCI bridges.
+ *	    This gives us fixed barriers on where we can allocate.
+ *	(2) Allocate resources for all enabled devices.  If there is
+ *	    a collision, just mark the resource as unallocated. Also
+ *	    disable expansion ROMs during this step.
+ *	(3) Try to allocate resources for disabled devices.  If the
+ *	    resources were assigned correctly, everything goes well,
+ *	    if they weren't, they won't disturb allocation of other
+ *	    resources.
+ *	(4) Assign new addresses to resources which were either
+ *	    not configured at all or misconfigured.  If explicitly
+ *	    requested by the user, configure expansion ROM address
+ *	    as well.
+ */
+
+void pcibios_allocate_bus_resources(struct pci_bus *bus)
+{
+	struct pci_bus *b;
+	int i;
+	struct resource *res, *pr;
+
+	pr_debug("PCI: Allocating bus resources for %04x:%02x...\n",
+		 pci_domain_nr(bus), bus->number);
+
+	for (i = 0; i < PCI_BUS_NUM_RESOURCES; ++i) {
+		res = bus->resource[i];
+		if (!res || !res->flags
+		    || res->start > res->end || res->parent)
+			continue;
+		if (bus->parent == NULL)
+			pr = (res->flags & IORESOURCE_IO) ?
+				&ioport_resource : &iomem_resource;
+		else {
+			/* Don't bother with non-root busses when
+			 * re-assigning all resources. We clear the
+			 * resource flags as if they were colliding
+			 * and as such ensure proper re-allocation
+			 * later.
+			 */
+			if (pci_flags & PCI_REASSIGN_ALL_RSRC)
+				goto clear_resource;
+			pr = pci_find_parent_resource(bus->self, res);
+			if (pr == res) {
+				/* this happens when the generic PCI
+				 * code (wrongly) decides that this
+				 * bridge is transparent  -- paulus
+				 */
+				continue;
+			}
+		}
+
+		pr_debug("PCI: %s (bus %d) bridge rsrc %d: %016llx-%016llx "
+			 "[0x%x], parent %p (%s)\n",
+			 bus->self ? pci_name(bus->self) : "PHB",
+			 bus->number, i,
+			 (unsigned long long)res->start,
+			 (unsigned long long)res->end,
+			 (unsigned int)res->flags,
+			 pr, (pr && pr->name) ? pr->name : "nil");
+
+		if (pr && !(pr->flags & IORESOURCE_UNSET)) {
+			if (request_resource(pr, res) == 0)
+				continue;
+			/*
+			 * Must be a conflict with an existing entry.
+			 * Move that entry (or entries) under the
+			 * bridge resource and try again.
+			 */
+			if (reparent_resources(pr, res) == 0)
+				continue;
+		}
+		printk(KERN_WARNING "PCI: Cannot allocate resource region "
+		       "%d of PCI bridge %d, will remap\n", i, bus->number);
+clear_resource:
+		res->flags = 0;
+	}
+
+	list_for_each_entry(b, &bus->children, node)
+		pcibios_allocate_bus_resources(b);
+}
+
+static inline void __devinit alloc_resource(struct pci_dev *dev, int idx)
+{
+	struct resource *pr, *r = &dev->resource[idx];
+
+	pr_debug("PCI: Allocating %s: Resource %d: %016llx..%016llx [%x]\n",
+		 pci_name(dev), idx,
+		 (unsigned long long)r->start,
+		 (unsigned long long)r->end,
+		 (unsigned int)r->flags);
+
+	pr = pci_find_parent_resource(dev, r);
+	if (!pr || (pr->flags & IORESOURCE_UNSET) ||
+	    request_resource(pr, r) < 0) {
+		printk(KERN_WARNING "PCI: Cannot allocate resource region %d"
+		       " of device %s, will remap\n", idx, pci_name(dev));
+		if (pr)
+			pr_debug("PCI:  parent is %p: %016llx-%016llx [%x]\n",
+				 pr,
+				 (unsigned long long)pr->start,
+				 (unsigned long long)pr->end,
+				 (unsigned int)pr->flags);
+		/* We'll assign a new address later */
+		r->flags |= IORESOURCE_UNSET;
+		r->end -= r->start;
+		r->start = 0;
+	}
+}
+
+static void __init pcibios_allocate_resources(int pass)
+{
+	struct pci_dev *dev = NULL;
+	int idx, disabled;
+	u16 command;
+	struct resource *r;
+
+	for_each_pci_dev(dev) {
+		pci_read_config_word(dev, PCI_COMMAND, &command);
+		for (idx = 0; idx <= PCI_ROM_RESOURCE; idx++) {
+			r = &dev->resource[idx];
+			if (r->parent)		/* Already allocated */
+				continue;
+			if (!r->flags || (r->flags & IORESOURCE_UNSET))
+				continue;	/* Not assigned at all */
+			/* We only allocate ROMs on pass 1 just in case they
+			 * have been screwed up by firmware
+			 */
+			if (idx == PCI_ROM_RESOURCE)
+				disabled = 1;
+			if (r->flags & IORESOURCE_IO)
+				disabled = !(command & PCI_COMMAND_IO);
+			else
+				disabled = !(command & PCI_COMMAND_MEMORY);
+			if (pass == disabled)
+				alloc_resource(dev, idx);
+		}
+		if (pass)
+			continue;
+		r = &dev->resource[PCI_ROM_RESOURCE];
+		if (r->flags) {
+			/* Turn the ROM off, leave the resource region,
+			 * but keep it unregistered.
+			 */
+			u32 reg;
+			pci_read_config_dword(dev, dev->rom_base_reg, &reg);
+			if (reg & PCI_ROM_ADDRESS_ENABLE) {
+				pr_debug("PCI: Switching off ROM of %s\n",
+					 pci_name(dev));
+				r->flags &= ~IORESOURCE_ROM_ENABLE;
+				pci_write_config_dword(dev, dev->rom_base_reg,
+						reg & ~PCI_ROM_ADDRESS_ENABLE);
+			}
+		}
+	}
+}
+
+static void __init pcibios_reserve_legacy_regions(struct pci_bus *bus)
+{
+	struct pci_controller *hose = pci_bus_to_host(bus);
+	resource_size_t	offset;
+	struct resource *res, *pres;
+	int i;
+
+	pr_debug("Reserving legacy ranges for domain %04x\n",
+							pci_domain_nr(bus));
+
+	/* Check for IO */
+	if (!(hose->io_resource.flags & IORESOURCE_IO))
+		goto no_io;
+	offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+	res = kzalloc(sizeof(struct resource), GFP_KERNEL);
+	BUG_ON(res == NULL);
+	res->name = "Legacy IO";
+	res->flags = IORESOURCE_IO;
+	res->start = offset;
+	res->end = (offset + 0xfff) & 0xfffffffful;
+	pr_debug("Candidate legacy IO: %pR\n", res);
+	if (request_resource(&hose->io_resource, res)) {
+		printk(KERN_DEBUG
+		       "PCI %04x:%02x Cannot reserve Legacy IO %pR\n",
+		       pci_domain_nr(bus), bus->number, res);
+		kfree(res);
+	}
+
+ no_io:
+	/* Check for memory */
+	offset = hose->pci_mem_offset;
+	pr_debug("hose mem offset: %016llx\n", (unsigned long long)offset);
+	for (i = 0; i < 3; i++) {
+		pres = &hose->mem_resources[i];
+		if (!(pres->flags & IORESOURCE_MEM))
+			continue;
+		pr_debug("hose mem res: %pR\n", pres);
+		if ((pres->start - offset) <= 0xa0000 &&
+		    (pres->end - offset) >= 0xbffff)
+			break;
+	}
+	if (i >= 3)
+		return;
+	res = kzalloc(sizeof(struct resource), GFP_KERNEL);
+	BUG_ON(res == NULL);
+	res->name = "Legacy VGA memory";
+	res->flags = IORESOURCE_MEM;
+	res->start = 0xa0000 + offset;
+	res->end = 0xbffff + offset;
+	pr_debug("Candidate VGA memory: %pR\n", res);
+	if (request_resource(pres, res)) {
+		printk(KERN_DEBUG
+		       "PCI %04x:%02x Cannot reserve VGA memory %pR\n",
+		       pci_domain_nr(bus), bus->number, res);
+		kfree(res);
+	}
+}
+
+void __init pcibios_resource_survey(void)
+{
+	struct pci_bus *b;
+
+	/* Allocate and assign resources. If we re-assign everything, then
+	 * we skip the allocate phase
+	 */
+	list_for_each_entry(b, &pci_root_buses, node)
+		pcibios_allocate_bus_resources(b);
+
+	if (!(pci_flags & PCI_REASSIGN_ALL_RSRC)) {
+		pcibios_allocate_resources(0);
+		pcibios_allocate_resources(1);
+	}
+
+	/* Before we start assigning unassigned resource, we try to reserve
+	 * the low IO area and the VGA memory area if they intersect the
+	 * bus available resources to avoid allocating things on top of them
+	 */
+	if (!(pci_flags & PCI_PROBE_ONLY)) {
+		list_for_each_entry(b, &pci_root_buses, node)
+			pcibios_reserve_legacy_regions(b);
+	}
+
+	/* Now, if the platform didn't decide to blindly trust the firmware,
+	 * we proceed to assigning things that were left unassigned
+	 */
+	if (!(pci_flags & PCI_PROBE_ONLY)) {
+		pr_debug("PCI: Assigning unassigned resources...\n");
+		pci_assign_unassigned_resources();
+	}
+}
+
+#ifdef CONFIG_HOTPLUG
+
+/* This is used by the PCI hotplug driver to allocate resource
+ * of newly plugged busses. We can try to consolidate with the
+ * rest of the code later, for now, keep it as-is as our main
+ * resource allocation function doesn't deal with sub-trees yet.
+ */
+void __devinit pcibios_claim_one_bus(struct pci_bus *bus)
+{
+	struct pci_dev *dev;
+	struct pci_bus *child_bus;
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		int i;
+
+		for (i = 0; i < PCI_NUM_RESOURCES; i++) {
+			struct resource *r = &dev->resource[i];
+
+			if (r->parent || !r->start || !r->flags)
+				continue;
+
+			pr_debug("PCI: Claiming %s: "
+				 "Resource %d: %016llx..%016llx [%x]\n",
+				 pci_name(dev), i,
+				 (unsigned long long)r->start,
+				 (unsigned long long)r->end,
+				 (unsigned int)r->flags);
+
+			pci_claim_resource(dev, i);
+		}
+	}
+
+	list_for_each_entry(child_bus, &bus->children, node)
+		pcibios_claim_one_bus(child_bus);
+}
+EXPORT_SYMBOL_GPL(pcibios_claim_one_bus);
+
+
+/* pcibios_finish_adding_to_bus
+ *
+ * This is to be called by the hotplug code after devices have been
+ * added to a bus, this include calling it for a PHB that is just
+ * being added
+ */
+void pcibios_finish_adding_to_bus(struct pci_bus *bus)
+{
+	pr_debug("PCI: Finishing adding to hotplug bus %04x:%02x\n",
+		 pci_domain_nr(bus), bus->number);
+
+	/* Allocate bus and devices resources */
+	pcibios_allocate_bus_resources(bus);
+	pcibios_claim_one_bus(bus);
+
+	/* Add new devices to global lists.  Register in proc, sysfs. */
+	pci_bus_add_devices(bus);
+
+	/* Fixup EEH */
+	eeh_add_device_tree_late(bus);
+}
+EXPORT_SYMBOL_GPL(pcibios_finish_adding_to_bus);
+
+#endif /* CONFIG_HOTPLUG */
+
+int pcibios_enable_device(struct pci_dev *dev, int mask)
+{
+	return pci_enable_resources(dev, mask);
+}
+
+void __devinit pcibios_setup_phb_resources(struct pci_controller *hose)
+{
+	struct pci_bus *bus = hose->bus;
+	struct resource *res;
+	int i;
+
+	/* Hookup PHB IO resource */
+	bus->resource[0] = res = &hose->io_resource;
+
+	if (!res->flags) {
+		printk(KERN_WARNING "PCI: I/O resource not set for host"
+		       " bridge %s (domain %d)\n",
+		       hose->dn->full_name, hose->global_number);
+		/* Workaround for lack of IO resource only on 32-bit */
+		res->start = (unsigned long)hose->io_base_virt - isa_io_base;
+		res->end = res->start + IO_SPACE_LIMIT;
+		res->flags = IORESOURCE_IO;
+	}
+
+	pr_debug("PCI: PHB IO resource    = %016llx-%016llx [%lx]\n",
+		 (unsigned long long)res->start,
+		 (unsigned long long)res->end,
+		 (unsigned long)res->flags);
+
+	/* Hookup PHB Memory resources */
+	for (i = 0; i < 3; ++i) {
+		res = &hose->mem_resources[i];
+		if (!res->flags) {
+			if (i > 0)
+				continue;
+			printk(KERN_ERR "PCI: Memory resource 0 not set for "
+			       "host bridge %s (domain %d)\n",
+			       hose->dn->full_name, hose->global_number);
+
+			/* Workaround for lack of MEM resource only on 32-bit */
+			res->start = hose->pci_mem_offset;
+			res->end = (resource_size_t)-1LL;
+			res->flags = IORESOURCE_MEM;
+
+		}
+		bus->resource[i+1] = res;
+
+		pr_debug("PCI: PHB MEM resource %d = %016llx-%016llx [%lx]\n",
+			i, (unsigned long long)res->start,
+			(unsigned long long)res->end,
+			(unsigned long)res->flags);
+	}
+
+	pr_debug("PCI: PHB MEM offset     = %016llx\n",
+		 (unsigned long long)hose->pci_mem_offset);
+	pr_debug("PCI: PHB IO  offset     = %08lx\n",
+		 (unsigned long)hose->io_base_virt - _IO_BASE);
+}
+
+/*
+ * Null PCI config access functions, for the case when we can't
+ * find a hose.
+ */
+#define NULL_PCI_OP(rw, size, type)					\
+static int								\
+null_##rw##_config_##size(struct pci_dev *dev, int offset, type val)	\
+{									\
+	return PCIBIOS_DEVICE_NOT_FOUND;				\
+}
+
+static int
+null_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
+		 int len, u32 *val)
+{
+	return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+static int
+null_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
+		  int len, u32 val)
+{
+	return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+static struct pci_ops null_pci_ops = {
+	.read = null_read_config,
+	.write = null_write_config,
+};
+
+/*
+ * These functions are used early on before PCI scanning is done
+ * and all of the pci_dev and pci_bus structures have been created.
+ */
+static struct pci_bus *
+fake_pci_bus(struct pci_controller *hose, int busnr)
+{
+	static struct pci_bus bus;
+
+	if (!hose)
+		printk(KERN_ERR "Can't find hose for PCI bus %d!\n", busnr);
+
+	bus.number = busnr;
+	bus.sysdata = hose;
+	bus.ops = hose ? hose->ops : &null_pci_ops;
+	return &bus;
+}
+
+#define EARLY_PCI_OP(rw, size, type)					\
+int early_##rw##_config_##size(struct pci_controller *hose, int bus,	\
+			       int devfn, int offset, type value)	\
+{									\
+	return pci_bus_##rw##_config_##size(fake_pci_bus(hose, bus),	\
+					    devfn, offset, value);	\
+}
+
+EARLY_PCI_OP(read, byte, u8 *)
+EARLY_PCI_OP(read, word, u16 *)
+EARLY_PCI_OP(read, dword, u32 *)
+EARLY_PCI_OP(write, byte, u8)
+EARLY_PCI_OP(write, word, u16)
+EARLY_PCI_OP(write, dword, u32)
+
+int early_find_capability(struct pci_controller *hose, int bus, int devfn,
+			  int cap)
+{
+	return pci_bus_find_capability(fake_pci_bus(hose, bus), devfn, cap);
+}
diff --git a/arch/microblaze/pci/pci_32.c b/arch/microblaze/pci/pci_32.c
new file mode 100644
index 000000000000..7e0c94f501cc
--- /dev/null
+++ b/arch/microblaze/pci/pci_32.c
@@ -0,0 +1,430 @@
+/*
+ * Common pmac/prep/chrp pci routines. -- Cort
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/capability.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/bootmem.h>
+#include <linux/irq.h>
+#include <linux/list.h>
+#include <linux/of.h>
+
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/sections.h>
+#include <asm/pci-bridge.h>
+#include <asm/byteorder.h>
+#include <asm/uaccess.h>
+
+#undef DEBUG
+
+unsigned long isa_io_base;
+unsigned long pci_dram_offset;
+int pcibios_assign_bus_offset = 1;
+
+static u8 *pci_to_OF_bus_map;
+
+/* By default, we don't re-assign bus numbers. We do this only on
+ * some pmacs
+ */
+static int pci_assign_all_buses;
+
+static int pci_bus_count;
+
+/*
+ * Functions below are used on OpenFirmware machines.
+ */
+static void
+make_one_node_map(struct device_node *node, u8 pci_bus)
+{
+	const int *bus_range;
+	int len;
+
+	if (pci_bus >= pci_bus_count)
+		return;
+	bus_range = of_get_property(node, "bus-range", &len);
+	if (bus_range == NULL || len < 2 * sizeof(int)) {
+		printk(KERN_WARNING "Can't get bus-range for %s, "
+		       "assuming it starts at 0\n", node->full_name);
+		pci_to_OF_bus_map[pci_bus] = 0;
+	} else
+		pci_to_OF_bus_map[pci_bus] = bus_range[0];
+
+	for_each_child_of_node(node, node) {
+		struct pci_dev *dev;
+		const unsigned int *class_code, *reg;
+
+		class_code = of_get_property(node, "class-code", NULL);
+		if (!class_code ||
+			((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
+			(*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS))
+			continue;
+		reg = of_get_property(node, "reg", NULL);
+		if (!reg)
+			continue;
+		dev = pci_get_bus_and_slot(pci_bus, ((reg[0] >> 8) & 0xff));
+		if (!dev || !dev->subordinate) {
+			pci_dev_put(dev);
+			continue;
+		}
+		make_one_node_map(node, dev->subordinate->number);
+		pci_dev_put(dev);
+	}
+}
+
+void
+pcibios_make_OF_bus_map(void)
+{
+	int i;
+	struct pci_controller *hose, *tmp;
+	struct property *map_prop;
+	struct device_node *dn;
+
+	pci_to_OF_bus_map = kmalloc(pci_bus_count, GFP_KERNEL);
+	if (!pci_to_OF_bus_map) {
+		printk(KERN_ERR "Can't allocate OF bus map !\n");
+		return;
+	}
+
+	/* We fill the bus map with invalid values, that helps
+	 * debugging.
+	 */
+	for (i = 0; i < pci_bus_count; i++)
+		pci_to_OF_bus_map[i] = 0xff;
+
+	/* For each hose, we begin searching bridges */
+	list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
+		struct device_node *node = hose->dn;
+
+		if (!node)
+			continue;
+		make_one_node_map(node, hose->first_busno);
+	}
+	dn = of_find_node_by_path("/");
+	map_prop = of_find_property(dn, "pci-OF-bus-map", NULL);
+	if (map_prop) {
+		BUG_ON(pci_bus_count > map_prop->length);
+		memcpy(map_prop->value, pci_to_OF_bus_map, pci_bus_count);
+	}
+	of_node_put(dn);
+#ifdef DEBUG
+	printk(KERN_INFO "PCI->OF bus map:\n");
+	for (i = 0; i < pci_bus_count; i++) {
+		if (pci_to_OF_bus_map[i] == 0xff)
+			continue;
+		printk(KERN_INFO "%d -> %d\n", i, pci_to_OF_bus_map[i]);
+	}
+#endif
+}
+
+typedef int (*pci_OF_scan_iterator)(struct device_node *node, void *data);
+
+static struct device_node *scan_OF_pci_childs(struct device_node *parent,
+					pci_OF_scan_iterator filter, void *data)
+{
+	struct device_node *node;
+	struct device_node *sub_node;
+
+	for_each_child_of_node(parent, node) {
+		const unsigned int *class_code;
+
+		if (filter(node, data)) {
+			of_node_put(node);
+			return node;
+		}
+
+		/* For PCI<->PCI bridges or CardBus bridges, we go down
+		 * Note: some OFs create a parent node "multifunc-device" as
+		 * a fake root for all functions of a multi-function device,
+		 * we go down them as well.
+		 */
+		class_code = of_get_property(node, "class-code", NULL);
+		if ((!class_code ||
+			((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
+			(*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) &&
+			strcmp(node->name, "multifunc-device"))
+			continue;
+		sub_node = scan_OF_pci_childs(node, filter, data);
+		if (sub_node) {
+			of_node_put(node);
+			return sub_node;
+		}
+	}
+	return NULL;
+}
+
+static struct device_node *scan_OF_for_pci_dev(struct device_node *parent,
+					       unsigned int devfn)
+{
+	struct device_node *np, *cnp;
+	const u32 *reg;
+	unsigned int psize;
+
+	for_each_child_of_node(parent, np) {
+		reg = of_get_property(np, "reg", &psize);
+		if (reg && psize >= 4 && ((reg[0] >> 8) & 0xff) == devfn)
+			return np;
+
+		/* Note: some OFs create a parent node "multifunc-device" as
+		 * a fake root for all functions of a multi-function device,
+		 * we go down them as well. */
+		if (!strcmp(np->name, "multifunc-device")) {
+			cnp = scan_OF_for_pci_dev(np, devfn);
+			if (cnp)
+				return cnp;
+		}
+	}
+	return NULL;
+}
+
+
+static struct device_node *scan_OF_for_pci_bus(struct pci_bus *bus)
+{
+	struct device_node *parent, *np;
+
+	/* Are we a root bus ? */
+	if (bus->self == NULL || bus->parent == NULL) {
+		struct pci_controller *hose = pci_bus_to_host(bus);
+		if (hose == NULL)
+			return NULL;
+		return of_node_get(hose->dn);
+	}
+
+	/* not a root bus, we need to get our parent */
+	parent = scan_OF_for_pci_bus(bus->parent);
+	if (parent == NULL)
+		return NULL;
+
+	/* now iterate for children for a match */
+	np = scan_OF_for_pci_dev(parent, bus->self->devfn);
+	of_node_put(parent);
+
+	return np;
+}
+
+/*
+ * Scans the OF tree for a device node matching a PCI device
+ */
+struct device_node *
+pci_busdev_to_OF_node(struct pci_bus *bus, int devfn)
+{
+	struct device_node *parent, *np;
+
+	pr_debug("pci_busdev_to_OF_node(%d,0x%x)\n", bus->number, devfn);
+	parent = scan_OF_for_pci_bus(bus);
+	if (parent == NULL)
+		return NULL;
+	pr_debug(" parent is %s\n", parent ? parent->full_name : "<NULL>");
+	np = scan_OF_for_pci_dev(parent, devfn);
+	of_node_put(parent);
+	pr_debug(" result is %s\n", np ? np->full_name : "<NULL>");
+
+	/* XXX most callers don't release the returned node
+	 * mostly because ppc64 doesn't increase the refcount,
+	 * we need to fix that.
+	 */
+	return np;
+}
+EXPORT_SYMBOL(pci_busdev_to_OF_node);
+
+struct device_node*
+pci_device_to_OF_node(struct pci_dev *dev)
+{
+	return pci_busdev_to_OF_node(dev->bus, dev->devfn);
+}
+EXPORT_SYMBOL(pci_device_to_OF_node);
+
+static int
+find_OF_pci_device_filter(struct device_node *node, void *data)
+{
+	return ((void *)node == data);
+}
+
+/*
+ * Returns the PCI device matching a given OF node
+ */
+int
+pci_device_from_OF_node(struct device_node *node, u8 *bus, u8 *devfn)
+{
+	const unsigned int *reg;
+	struct pci_controller *hose;
+	struct pci_dev *dev = NULL;
+
+	/* Make sure it's really a PCI device */
+	hose = pci_find_hose_for_OF_device(node);
+	if (!hose || !hose->dn)
+		return -ENODEV;
+	if (!scan_OF_pci_childs(hose->dn,
+			find_OF_pci_device_filter, (void *)node))
+		return -ENODEV;
+	reg = of_get_property(node, "reg", NULL);
+	if (!reg)
+		return -ENODEV;
+	*bus = (reg[0] >> 16) & 0xff;
+	*devfn = ((reg[0] >> 8) & 0xff);
+
+	/* Ok, here we need some tweak. If we have already renumbered
+	 * all busses, we can't rely on the OF bus number any more.
+	 * the pci_to_OF_bus_map is not enough as several PCI busses
+	 * may match the same OF bus number.
+	 */
+	if (!pci_to_OF_bus_map)
+		return 0;
+
+	for_each_pci_dev(dev)
+		if (pci_to_OF_bus_map[dev->bus->number] == *bus &&
+				dev->devfn == *devfn) {
+			*bus = dev->bus->number;
+			pci_dev_put(dev);
+			return 0;
+		}
+
+	return -ENODEV;
+}
+EXPORT_SYMBOL(pci_device_from_OF_node);
+
+/* We create the "pci-OF-bus-map" property now so it appears in the
+ * /proc device tree
+ */
+void __init
+pci_create_OF_bus_map(void)
+{
+	struct property *of_prop;
+	struct device_node *dn;
+
+	of_prop = (struct property *) alloc_bootmem(sizeof(struct property) + \
+									 256);
+	if (!of_prop)
+		return;
+	dn = of_find_node_by_path("/");
+	if (dn) {
+		memset(of_prop, -1, sizeof(struct property) + 256);
+		of_prop->name = "pci-OF-bus-map";
+		of_prop->length = 256;
+		of_prop->value = &of_prop[1];
+		prom_add_property(dn, of_prop);
+		of_node_put(dn);
+	}
+}
+
+static void __devinit pcibios_scan_phb(struct pci_controller *hose)
+{
+	struct pci_bus *bus;
+	struct device_node *node = hose->dn;
+	unsigned long io_offset;
+	struct resource *res = &hose->io_resource;
+
+	pr_debug("PCI: Scanning PHB %s\n",
+		 node ? node->full_name : "<NO NAME>");
+
+	/* Create an empty bus for the toplevel */
+	bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops, hose);
+	if (bus == NULL) {
+		printk(KERN_ERR "Failed to create bus for PCI domain %04x\n",
+		       hose->global_number);
+		return;
+	}
+	bus->secondary = hose->first_busno;
+	hose->bus = bus;
+
+	/* Fixup IO space offset */
+	io_offset = (unsigned long)hose->io_base_virt - isa_io_base;
+	res->start = (res->start + io_offset) & 0xffffffffu;
+	res->end = (res->end + io_offset) & 0xffffffffu;
+
+	/* Wire up PHB bus resources */
+	pcibios_setup_phb_resources(hose);
+
+	/* Scan children */
+	hose->last_busno = bus->subordinate = pci_scan_child_bus(bus);
+}
+
+static int __init pcibios_init(void)
+{
+	struct pci_controller *hose, *tmp;
+	int next_busno = 0;
+
+	printk(KERN_INFO "PCI: Probing PCI hardware\n");
+
+	if (pci_flags & PCI_REASSIGN_ALL_BUS) {
+		printk(KERN_INFO "setting pci_asign_all_busses\n");
+		pci_assign_all_buses = 1;
+	}
+
+	/* Scan all of the recorded PCI controllers.  */
+	list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
+		if (pci_assign_all_buses)
+			hose->first_busno = next_busno;
+		hose->last_busno = 0xff;
+		pcibios_scan_phb(hose);
+		printk(KERN_INFO "calling pci_bus_add_devices()\n");
+		pci_bus_add_devices(hose->bus);
+		if (pci_assign_all_buses || next_busno <= hose->last_busno)
+			next_busno = hose->last_busno + \
+					pcibios_assign_bus_offset;
+	}
+	pci_bus_count = next_busno;
+
+	/* OpenFirmware based machines need a map of OF bus
+	 * numbers vs. kernel bus numbers since we may have to
+	 * remap them.
+	 */
+	if (pci_assign_all_buses)
+		pcibios_make_OF_bus_map();
+
+	/* Call common code to handle resource allocation */
+	pcibios_resource_survey();
+
+	return 0;
+}
+
+subsys_initcall(pcibios_init);
+
+static struct pci_controller*
+pci_bus_to_hose(int bus)
+{
+	struct pci_controller *hose, *tmp;
+
+	list_for_each_entry_safe(hose, tmp, &hose_list, list_node)
+		if (bus >= hose->first_busno && bus <= hose->last_busno)
+			return hose;
+	return NULL;
+}
+
+/* Provide information on locations of various I/O regions in physical
+ * memory.  Do this on a per-card basis so that we choose the right
+ * root bridge.
+ * Note that the returned IO or memory base is a physical address
+ */
+
+long sys_pciconfig_iobase(long which, unsigned long bus, unsigned long devfn)
+{
+	struct pci_controller *hose;
+	long result = -EOPNOTSUPP;
+
+	hose = pci_bus_to_hose(bus);
+	if (!hose)
+		return -ENODEV;
+
+	switch (which) {
+	case IOBASE_BRIDGE_NUMBER:
+		return (long)hose->first_busno;
+	case IOBASE_MEMORY:
+		return (long)hose->pci_mem_offset;
+	case IOBASE_IO:
+		return (long)hose->io_base_phys;
+	case IOBASE_ISA_IO:
+		return (long)isa_io_base;
+	case IOBASE_ISA_MEM:
+		return (long)isa_mem_base;
+	}
+
+	return result;
+}
diff --git a/arch/microblaze/pci/xilinx_pci.c b/arch/microblaze/pci/xilinx_pci.c
new file mode 100644
index 000000000000..7869a41b0f94
--- /dev/null
+++ b/arch/microblaze/pci/xilinx_pci.c
@@ -0,0 +1,168 @@
+/*
+ * PCI support for Xilinx plbv46_pci soft-core which can be used on
+ * Xilinx Virtex ML410 / ML510 boards.
+ *
+ * Copyright 2009 Roderick Colenbrander
+ * Copyright 2009 Secret Lab Technologies Ltd.
+ *
+ * The pci bridge fixup code was copied from ppc4xx_pci.c and was written
+ * by Benjamin Herrenschmidt.
+ * Copyright 2007 Ben. Herrenschmidt <benh@kernel.crashing.org>, IBM Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/ioport.h>
+#include <linux/of.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+
+#define XPLB_PCI_ADDR 0x10c
+#define XPLB_PCI_DATA 0x110
+#define XPLB_PCI_BUS  0x114
+
+#define PCI_HOST_ENABLE_CMD (PCI_COMMAND_SERR | PCI_COMMAND_PARITY | \
+				PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY)
+
+static struct of_device_id xilinx_pci_match[] = {
+	{ .compatible = "xlnx,plbv46-pci-1.03.a", },
+	{}
+};
+
+/**
+ * xilinx_pci_fixup_bridge - Block Xilinx PHB configuration.
+ */
+static void xilinx_pci_fixup_bridge(struct pci_dev *dev)
+{
+	struct pci_controller *hose;
+	int i;
+
+	if (dev->devfn || dev->bus->self)
+		return;
+
+	hose = pci_bus_to_host(dev->bus);
+	if (!hose)
+		return;
+
+	if (!of_match_node(xilinx_pci_match, hose->dn))
+		return;
+
+	/* Hide the PCI host BARs from the kernel as their content doesn't
+	 * fit well in the resource management
+	 */
+	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+		dev->resource[i].start = 0;
+		dev->resource[i].end = 0;
+		dev->resource[i].flags = 0;
+	}
+
+	dev_info(&dev->dev, "Hiding Xilinx plb-pci host bridge resources %s\n",
+		 pci_name(dev));
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, xilinx_pci_fixup_bridge);
+
+#ifdef DEBUG
+/**
+ * xilinx_pci_exclude_device - Don't do config access for non-root bus
+ *
+ * This is a hack.  Config access to any bus other than bus 0 does not
+ * currently work on the ML510 so we prevent it here.
+ */
+static int
+xilinx_pci_exclude_device(struct pci_controller *hose, u_char bus, u8 devfn)
+{
+	return (bus != 0);
+}
+
+/**
+ * xilinx_early_pci_scan - List pci config space for available devices
+ *
+ * List pci devices in very early phase.
+ */
+void __init xilinx_early_pci_scan(struct pci_controller *hose)
+{
+	u32 bus = 0;
+	u32 val, dev, func, offset;
+
+	/* Currently we have only 2 device connected - up-to 32 devices */
+	for (dev = 0; dev < 2; dev++) {
+		/* List only first function number - up-to 8 functions */
+		for (func = 0; func < 1; func++) {
+			printk(KERN_INFO "%02x:%02x:%02x", bus, dev, func);
+			/* read the first 64 standardized bytes */
+			/* Up-to 192 bytes can be list of capabilities */
+			for (offset = 0; offset < 64; offset += 4) {
+				early_read_config_dword(hose, bus,
+					PCI_DEVFN(dev, func), offset, &val);
+				if (offset == 0 && val == 0xFFFFFFFF) {
+					printk(KERN_CONT "\nABSENT");
+					break;
+				}
+				if (!(offset % 0x10))
+					printk(KERN_CONT "\n%04x:    ", offset);
+
+				printk(KERN_CONT "%08x  ", val);
+			}
+			printk(KERN_INFO "\n");
+		}
+	}
+}
+#else
+void __init xilinx_early_pci_scan(struct pci_controller *hose)
+{
+}
+#endif
+
+/**
+ * xilinx_pci_init - Find and register a Xilinx PCI host bridge
+ */
+void __init xilinx_pci_init(void)
+{
+	struct pci_controller *hose;
+	struct resource r;
+	void __iomem *pci_reg;
+	struct device_node *pci_node;
+
+	pci_node = of_find_matching_node(NULL, xilinx_pci_match);
+	if (!pci_node)
+		return;
+
+	if (of_address_to_resource(pci_node, 0, &r)) {
+		pr_err("xilinx-pci: cannot resolve base address\n");
+		return;
+	}
+
+	hose = pcibios_alloc_controller(pci_node);
+	if (!hose) {
+		pr_err("xilinx-pci: pcibios_alloc_controller() failed\n");
+		return;
+	}
+
+	/* Setup config space */
+	setup_indirect_pci(hose, r.start + XPLB_PCI_ADDR,
+			   r.start + XPLB_PCI_DATA,
+			   INDIRECT_TYPE_SET_CFG_TYPE);
+
+	/* According to the xilinx plbv46_pci documentation the soft-core starts
+	 * a self-init when the bus master enable bit is set. Without this bit
+	 * set the pci bus can't be scanned.
+	 */
+	early_write_config_word(hose, 0, 0, PCI_COMMAND, PCI_HOST_ENABLE_CMD);
+
+	/* Set the max latency timer to 255 */
+	early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0xff);
+
+	/* Set the max bus number to 255, and bus/subbus no's to 0 */
+	pci_reg = of_iomap(pci_node, 0);
+	out_be32(pci_reg + XPLB_PCI_BUS, 0x000000ff);
+	iounmap(pci_reg);
+
+	/* Register the host bridge with the linux kernel! */
+	pci_process_bridge_OF_ranges(hose, pci_node,
+					INDIRECT_TYPE_SET_CFG_TYPE);
+
+	pr_info("xilinx-pci: Registered PCI host bridge\n");
+	xilinx_early_pci_scan(hose);
+}
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 591ca0cd4c24..29e86923d1bf 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -812,9 +812,9 @@ config DMA_COHERENT
 
 config DMA_NONCOHERENT
 	bool
-	select DMA_NEED_PCI_MAP_STATE
+	select NEED_DMA_MAP_STATE
 
-config DMA_NEED_PCI_MAP_STATE
+config NEED_DMA_MAP_STATE
 	bool
 
 config SYS_HAS_EARLY_PRINTK
diff --git a/arch/mips/include/asm/compat.h b/arch/mips/include/asm/compat.h
index f58aed354bfd..613f6912dfc1 100644
--- a/arch/mips/include/asm/compat.h
+++ b/arch/mips/include/asm/compat.h
@@ -8,7 +8,8 @@
 #include <asm/page.h>
 #include <asm/ptrace.h>
 
-#define COMPAT_USER_HZ	100
+#define COMPAT_USER_HZ		100
+#define COMPAT_UTS_MACHINE	"mips\0\0\0"
 
 typedef u32		compat_size_t;
 typedef s32		compat_ssize_t;
diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h
index 5ebf82572ec0..3beea1479b43 100644
--- a/arch/mips/include/asm/pci.h
+++ b/arch/mips/include/asm/pci.h
@@ -102,28 +102,6 @@ struct pci_dev;
  */
 extern unsigned int PCI_DMA_BUS_IS_PHYS;
 
-#ifdef CONFIG_DMA_NEED_PCI_MAP_STATE
-
-/* pci_unmap_{single,page} is not a nop, thus... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	dma_addr_t ADDR_NAME;
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		__u32 LEN_NAME;
-#define pci_unmap_addr(PTR, ADDR_NAME)		((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	(((PTR)->ADDR_NAME) = (VAL))
-#define pci_unmap_len(PTR, LEN_NAME)		((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	(((PTR)->LEN_NAME) = (VAL))
-
-#else /* CONFIG_DMA_NEED_PCI_MAP_STATE  */
-
-/* pci_unmap_{page,single} is a nop so... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
-#define pci_unmap_addr(PTR, ADDR_NAME)		(0)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	do { } while (0)
-#define pci_unmap_len(PTR, LEN_NAME)		(0)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0)
-
-#endif /* CONFIG_DMA_NEED_PCI_MAP_STATE  */
-
 #ifdef CONFIG_PCI
 static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 					enum pci_dma_burst_strategy *strat,
diff --git a/arch/mips/include/asm/unistd.h b/arch/mips/include/asm/unistd.h
index 65c679ecbe6b..1b5a6648eb86 100644
--- a/arch/mips/include/asm/unistd.h
+++ b/arch/mips/include/asm/unistd.h
@@ -1004,6 +1004,7 @@
 #define __ARCH_WANT_OLD_READDIR
 #define __ARCH_WANT_SYS_ALARM
 #define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_IPC
 #define __ARCH_WANT_SYS_PAUSE
 #define __ARCH_WANT_SYS_SGETMASK
 #define __ARCH_WANT_SYS_UTIME
@@ -1013,6 +1014,7 @@
 #define __ARCH_WANT_SYS_LLSEEK
 #define __ARCH_WANT_SYS_NICE
 #define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLD_UNAME
 #define __ARCH_WANT_SYS_OLDUMOUNT
 #define __ARCH_WANT_SYS_SIGPENDING
 #define __ARCH_WANT_SYS_SIGPROCMASK
diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c
index bde79ef602e6..a39d0597a375 100644
--- a/arch/mips/kernel/linux32.c
+++ b/arch/mips/kernel/linux32.c
@@ -249,22 +249,6 @@ SYSCALL_DEFINE5(n32_msgrcv, int, msqid, u32, msgp, size_t, msgsz,
 }
 #endif
 
-SYSCALL_DEFINE1(32_newuname, struct new_utsname __user *, name)
-{
-	int ret = 0;
-
-	down_read(&uts_sem);
-	if (copy_to_user(name, utsname(), sizeof *name))
-		ret = -EFAULT;
-	up_read(&uts_sem);
-
-	if (current->personality == PER_LINUX32 && !ret)
-		if (copy_to_user(name->machine, "mips\0\0\0", 8))
-			ret = -EFAULT;
-
-	return ret;
-}
-
 SYSCALL_DEFINE1(32_personality, unsigned long, personality)
 {
 	int ret;
diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c
index 054861ccb4dd..c51b95ff8644 100644
--- a/arch/mips/kernel/ptrace.c
+++ b/arch/mips/kernel/ptrace.c
@@ -493,36 +493,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		ret = ptrace_setfpregs(child, (__u32 __user *) data);
 		break;
 
-	case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
-	case PTRACE_CONT: { /* restart after signal. */
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		if (request == PTRACE_SYSCALL) {
-			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		}
-		else {
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		}
-		child->exit_code = data;
-		wake_up_process(child);
-		ret = 0;
-		break;
-	}
-
-	/*
-	 * make the child exit.  Best I can do is send it a sigkill.
-	 * perhaps it should be put in the status that it wants to
-	 * exit.
-	 */
-	case PTRACE_KILL:
-		ret = 0;
-		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
-			break;
-		child->exit_code = SIGKILL;
-		wake_up_process(child);
-		break;
-
 	case PTRACE_GET_THREAD_AREA:
 		ret = put_user(task_thread_info(child)->tp_value,
 				(unsigned long __user *) data);
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index 66b5a48676dd..44337ba03717 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -181,7 +181,7 @@ EXPORT(sysn32_call_table)
 	PTR	sys_exit
 	PTR	compat_sys_wait4
 	PTR	sys_kill			/* 6060 */
-	PTR	sys_32_newuname
+	PTR	sys_newuname
 	PTR	sys_semget
 	PTR	sys_semop
 	PTR	sys_n32_semctl
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 515f9eab2b28..813689ef2384 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -325,7 +325,7 @@ sys_call_table:
 	PTR	sys32_sigreturn
 	PTR	sys32_clone			/* 4120 */
 	PTR	sys_setdomainname
-	PTR	sys_32_newuname
+	PTR	sys_newuname
 	PTR	sys_ni_syscall			/* sys_modify_ldt */
 	PTR	compat_sys_adjtimex
 	PTR	sys_mprotect			/* 4125 */
diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c
index 3f7f466190b4..e96b1c30c7aa 100644
--- a/arch/mips/kernel/syscall.c
+++ b/arch/mips/kernel/syscall.c
@@ -215,48 +215,6 @@ out:
 	return error;
 }
 
-/*
- * Compacrapability ...
- */
-SYSCALL_DEFINE1(uname, struct old_utsname __user *, name)
-{
-	if (name && !copy_to_user(name, utsname(), sizeof (*name)))
-		return 0;
-	return -EFAULT;
-}
-
-/*
- * Compacrapability ...
- */
-SYSCALL_DEFINE1(olduname, struct oldold_utsname __user *, name)
-{
-	int error;
-
-	if (!name)
-		return -EFAULT;
-	if (!access_ok(VERIFY_WRITE, name, sizeof(struct oldold_utsname)))
-		return -EFAULT;
-
-	error = __copy_to_user(&name->sysname, &utsname()->sysname,
-			       __OLD_UTS_LEN);
-	error -= __put_user(0, name->sysname + __OLD_UTS_LEN);
-	error -= __copy_to_user(&name->nodename, &utsname()->nodename,
-				__OLD_UTS_LEN);
-	error -= __put_user(0, name->nodename + __OLD_UTS_LEN);
-	error -= __copy_to_user(&name->release, &utsname()->release,
-				__OLD_UTS_LEN);
-	error -= __put_user(0, name->release + __OLD_UTS_LEN);
-	error -= __copy_to_user(&name->version, &utsname()->version,
-				__OLD_UTS_LEN);
-	error -= __put_user(0, name->version + __OLD_UTS_LEN);
-	error -= __copy_to_user(&name->machine, &utsname()->machine,
-				__OLD_UTS_LEN);
-	error = __put_user(0, name->machine + __OLD_UTS_LEN);
-	error = error ? -EFAULT : 0;
-
-	return error;
-}
-
 SYSCALL_DEFINE1(set_thread_area, unsigned long, addr)
 {
 	struct thread_info *ti = task_thread_info(current);
@@ -407,94 +365,6 @@ _sys_sysmips(nabi_no_regargs struct pt_regs regs)
 }
 
 /*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly.
- */
-SYSCALL_DEFINE6(ipc, unsigned int, call, int, first, int, second,
-	unsigned long, third, void __user *, ptr, long, fifth)
-{
-	int version, ret;
-
-	version = call >> 16; /* hack for backward compatibility */
-	call &= 0xffff;
-
-	switch (call) {
-	case SEMOP:
-		return sys_semtimedop(first, (struct sembuf __user *)ptr,
-		                      second, NULL);
-	case SEMTIMEDOP:
-		return sys_semtimedop(first, (struct sembuf __user *)ptr,
-				      second,
-				      (const struct timespec __user *)fifth);
-	case SEMGET:
-		return sys_semget(first, second, third);
-	case SEMCTL: {
-		union semun fourth;
-		if (!ptr)
-			return -EINVAL;
-		if (get_user(fourth.__pad, (void __user *__user *) ptr))
-			return -EFAULT;
-		return sys_semctl(first, second, third, fourth);
-	}
-
-	case MSGSND:
-		return sys_msgsnd(first, (struct msgbuf __user *) ptr,
-				  second, third);
-	case MSGRCV:
-		switch (version) {
-		case 0: {
-			struct ipc_kludge tmp;
-			if (!ptr)
-				return -EINVAL;
-
-			if (copy_from_user(&tmp,
-					   (struct ipc_kludge __user *) ptr,
-					   sizeof(tmp)))
-				return -EFAULT;
-			return sys_msgrcv(first, tmp.msgp, second,
-					  tmp.msgtyp, third);
-		}
-		default:
-			return sys_msgrcv(first,
-					  (struct msgbuf __user *) ptr,
-					  second, fifth, third);
-		}
-	case MSGGET:
-		return sys_msgget((key_t) first, second);
-	case MSGCTL:
-		return sys_msgctl(first, second,
-				  (struct msqid_ds __user *) ptr);
-
-	case SHMAT:
-		switch (version) {
-		default: {
-			unsigned long raddr;
-			ret = do_shmat(first, (char __user *) ptr, second,
-				       &raddr);
-			if (ret)
-				return ret;
-			return put_user(raddr, (unsigned long __user *) third);
-		}
-		case 1:	/* iBCS2 emulator entry point */
-			if (!segment_eq(get_fs(), get_ds()))
-				return -EINVAL;
-			return do_shmat(first, (char __user *) ptr, second,
-				        (unsigned long *) third);
-		}
-	case SHMDT:
-		return sys_shmdt((char __user *)ptr);
-	case SHMGET:
-		return sys_shmget(first, second, third);
-	case SHMCTL:
-		return sys_shmctl(first, second,
-				  (struct shmid_ds __user *) ptr);
-	default:
-		return -ENOSYS;
-	}
-}
-
-/*
  * No implemented yet ...
  */
 SYSCALL_DEFINE3(cachectl, char *, addr, int, nbytes, int, op)
diff --git a/arch/mips/txx9/generic/7segled.c b/arch/mips/txx9/generic/7segled.c
index 727ab21b6618..7f8416f86222 100644
--- a/arch/mips/txx9/generic/7segled.c
+++ b/arch/mips/txx9/generic/7segled.c
@@ -58,13 +58,16 @@ static ssize_t raw_store(struct sys_device *dev,
 static SYSDEV_ATTR(ascii, 0200, NULL, ascii_store);
 static SYSDEV_ATTR(raw, 0200, NULL, raw_store);
 
-static ssize_t map_seg7_show(struct sysdev_class *class, char *buf)
+static ssize_t map_seg7_show(struct sysdev_class *class,
+			     struct sysdev_class_attribute *attr,
+			     char *buf)
 {
 	memcpy(buf, &txx9_seg7map, sizeof(txx9_seg7map));
 	return sizeof(txx9_seg7map);
 }
 
 static ssize_t map_seg7_store(struct sysdev_class *class,
+			      struct sysdev_class_attribute *attr,
 			      const char *buf, size_t size)
 {
 	if (size != sizeof(txx9_seg7map))
diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c
index 7174d830dd05..95184a0a1ae6 100644
--- a/arch/mips/txx9/generic/setup.c
+++ b/arch/mips/txx9/generic/setup.c
@@ -956,6 +956,7 @@ void __init txx9_sramc_init(struct resource *r)
 	if (!dev->base)
 		goto exit;
 	dev->dev.cls = &txx9_sramc_sysdev_class;
+	sysfs_bin_attr_init(&dev->bindata_attr);
 	dev->bindata_attr.attr.name = "bindata";
 	dev->bindata_attr.attr.mode = S_IRUSR | S_IWUSR;
 	dev->bindata_attr.read = txx9_sram_read;
diff --git a/arch/mn10300/include/asm/dma-mapping.h b/arch/mn10300/include/asm/dma-mapping.h
index ccae8f6c6326..4ed1522b38d2 100644
--- a/arch/mn10300/include/asm/dma-mapping.h
+++ b/arch/mn10300/include/asm/dma-mapping.h
@@ -17,6 +17,11 @@
 #include <asm/cache.h>
 #include <asm/io.h>
 
+/*
+ * See Documentation/DMA-API.txt for the description of how the
+ * following DMA API should work.
+ */
+
 extern void *dma_alloc_coherent(struct device *dev, size_t size,
 				dma_addr_t *dma_handle, int flag);
 
@@ -26,13 +31,6 @@ extern void dma_free_coherent(struct device *dev, size_t size,
 #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent((d), (s), (h), (f))
 #define dma_free_noncoherent(d, s, v, h)  dma_free_coherent((d), (s), (v), (h))
 
-/*
- * Map a single buffer of the indicated size for DMA in streaming mode.  The
- * 32-bit bus address to use is returned.
- *
- * Once the device is given the dma address, the device owns this memory until
- * either pci_unmap_single or pci_dma_sync_single is performed.
- */
 static inline
 dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
 			  enum dma_data_direction direction)
@@ -42,14 +40,6 @@ dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
 	return virt_to_bus(ptr);
 }
 
-/*
- * Unmap a single streaming mode DMA translation.  The dma_addr and size must
- * match what was provided for in a previous pci_map_single call.  All other
- * usages are undefined.
- *
- * After this call, reads by the cpu to the buffer are guarenteed to see
- * whatever the device wrote there.
- */
 static inline
 void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 		      enum dma_data_direction direction)
@@ -57,20 +47,6 @@ void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 	BUG_ON(direction == DMA_NONE);
 }
 
-/*
- * Map a set of buffers described by scatterlist in streaming mode for DMA.
- * This is the scather-gather version of the above pci_map_single interface.
- * Here the scatter gather list elements are each tagged with the appropriate
- * dma address and length.  They are obtained via sg_dma_{address,length}(SG).
- *
- * NOTE: An implementation may be able to use a smaller number of DMA
- *       address/length pairs than there are SG table elements.  (for example
- *       via virtual mapping capabilities) The routine returns the number of
- *       addr/length pairs actually used, at most nents.
- *
- * Device ownership issues as mentioned above for pci_map_single are the same
- * here.
- */
 static inline
 int dma_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
 	       enum dma_data_direction direction)
@@ -91,11 +67,6 @@ int dma_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
 	return nents;
 }
 
-/*
- * Unmap a set of streaming mode DMA translations.
- * Again, cpu read rules concerning calls here are the same as for
- * pci_unmap_single() above.
- */
 static inline
 void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
 		  enum dma_data_direction direction)
@@ -103,10 +74,6 @@ void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
 	BUG_ON(!valid_dma_direction(direction));
 }
 
-/*
- * pci_{map,unmap}_single_page maps a kernel page to a dma_addr_t. identical
- * to pci_map_single, but takes a struct page instead of a virtual address
- */
 static inline
 dma_addr_t dma_map_page(struct device *dev, struct page *page,
 			unsigned long offset, size_t size,
@@ -123,15 +90,6 @@ void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
 	BUG_ON(direction == DMA_NONE);
 }
 
-/*
- * Make physical memory consistent for a single streaming mode DMA translation
- * after a transfer.
- *
- * If you perform a pci_map_single() but wish to interrogate the buffer using
- * the cpu, yet do not wish to teardown the PCI dma mapping, you must call this
- * function before doing so.  At the next point you give the PCI dma address
- * back to the card, the device again owns the buffer.
- */
 static inline
 void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
 			     size_t size, enum dma_data_direction direction)
@@ -161,13 +119,6 @@ dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle,
 }
 
 
-/*
- * Make physical memory consistent for a set of streaming mode DMA translations
- * after a transfer.
- *
- * The same as pci_dma_sync_single but for a scatter-gather list, same rules
- * and usage.
- */
 static inline
 void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
 			 int nelems, enum dma_data_direction direction)
@@ -187,12 +138,6 @@ int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 	return 0;
 }
 
-/*
- * Return whether the given PCI device DMA address mask can be supported
- * properly.  For example, if your device can only drive the low 24-bits during
- * PCI bus mastering, then you would pass 0x00ffffff as the mask to this
- * function.
- */
 static inline
 int dma_supported(struct device *dev, u64 mask)
 {
diff --git a/arch/mn10300/include/asm/ptrace.h b/arch/mn10300/include/asm/ptrace.h
index 1b0ba5e182b0..7c2e911052b6 100644
--- a/arch/mn10300/include/asm/ptrace.h
+++ b/arch/mn10300/include/asm/ptrace.h
@@ -99,8 +99,6 @@ struct task_struct;
 extern void show_regs(struct pt_regs *);
 
 #define arch_has_single_step()	(1)
-extern void user_enable_single_step(struct task_struct *);
-extern void user_disable_single_step(struct task_struct *);
 
 #endif  /*  !__ASSEMBLY  */
 
diff --git a/arch/mn10300/include/asm/unistd.h b/arch/mn10300/include/asm/unistd.h
index c05acb95c2a9..9d056f515929 100644
--- a/arch/mn10300/include/asm/unistd.h
+++ b/arch/mn10300/include/asm/unistd.h
@@ -363,6 +363,7 @@
 #define __ARCH_WANT_STAT64
 #define __ARCH_WANT_SYS_ALARM
 #define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_IPC
 #define __ARCH_WANT_SYS_PAUSE
 #define __ARCH_WANT_SYS_SGETMASK
 #define __ARCH_WANT_SYS_SIGNAL
@@ -375,6 +376,7 @@
 #define __ARCH_WANT_SYS_LLSEEK
 #define __ARCH_WANT_SYS_NICE
 #define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLD_SELECT
 #define __ARCH_WANT_SYS_OLDUMOUNT
 #define __ARCH_WANT_SYS_SIGPENDING
 #define __ARCH_WANT_SYS_SIGPROCMASK
diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S
index 88e3e1c3cc21..d9ed5a15c547 100644
--- a/arch/mn10300/kernel/entry.S
+++ b/arch/mn10300/kernel/entry.S
@@ -468,7 +468,7 @@ ENTRY(sys_call_table)
 	.long sys_settimeofday
 	.long sys_getgroups16	/* 80 */
 	.long sys_setgroups16
-	.long old_select
+	.long sys_old_select
 	.long sys_symlink
 	.long sys_lstat
 	.long sys_readlink	/* 85 */
diff --git a/arch/mn10300/kernel/sys_mn10300.c b/arch/mn10300/kernel/sys_mn10300.c
index 17cc6ce04e84..815f1355fad4 100644
--- a/arch/mn10300/kernel/sys_mn10300.c
+++ b/arch/mn10300/kernel/sys_mn10300.c
@@ -31,109 +31,3 @@ asmlinkage long old_mmap(unsigned long addr, unsigned long len,
 		return -EINVAL;
 	return sys_mmap_pgoff(addr, len, prot, flags, fd, offset >> PAGE_SHIFT);
 }
-
-struct sel_arg_struct {
-	unsigned long n;
-	fd_set *inp;
-	fd_set *outp;
-	fd_set *exp;
-	struct timeval *tvp;
-};
-
-asmlinkage int old_select(struct sel_arg_struct __user *arg)
-{
-	struct sel_arg_struct a;
-
-	if (copy_from_user(&a, arg, sizeof(a)))
-		return -EFAULT;
-	/* sys_select() does the appropriate kernel locking */
-	return sys_select(a.n, a.inp, a.outp, a.exp, a.tvp);
-}
-
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly.
- */
-asmlinkage long sys_ipc(uint call, int first, int second,
-			int third, void __user *ptr, long fifth)
-{
-	int version, ret;
-
-	version = call >> 16; /* hack for backward compatibility */
-	call &= 0xffff;
-
-	switch (call) {
-	case SEMOP:
-		return sys_semtimedop(first, (struct sembuf __user *)ptr,
-				      second, NULL);
-	case SEMTIMEDOP:
-		return sys_semtimedop(first, (struct sembuf __user *)ptr,
-				      second,
-				      (const struct timespec __user *)fifth);
-	case SEMGET:
-		return sys_semget(first, second, third);
-	case SEMCTL: {
-		union semun fourth;
-		if (!ptr)
-			return -EINVAL;
-		if (get_user(fourth.__pad, (void __user * __user *) ptr))
-			return -EFAULT;
-		return sys_semctl(first, second, third, fourth);
-	}
-
-	case MSGSND:
-		return sys_msgsnd(first, (struct msgbuf __user *) ptr,
-				  second, third);
-	case MSGRCV:
-		switch (version) {
-		case 0: {
-			struct ipc_kludge tmp;
-			if (!ptr)
-				return -EINVAL;
-
-			if (copy_from_user(&tmp,
-					   (struct ipc_kludge __user *) ptr,
-					   sizeof(tmp)))
-				return -EFAULT;
-			return sys_msgrcv(first, tmp.msgp, second,
-					  tmp.msgtyp, third);
-		}
-		default:
-			return sys_msgrcv(first,
-					  (struct msgbuf __user *) ptr,
-					   second, fifth, third);
-		}
-	case MSGGET:
-		return sys_msgget((key_t) first, second);
-	case MSGCTL:
-		return sys_msgctl(first, second,
-				   (struct msqid_ds __user *) ptr);
-
-	case SHMAT:
-		switch (version) {
-		default: {
-			ulong raddr;
-			ret = do_shmat(first, (char __user *) ptr, second,
-				       &raddr);
-			if (ret)
-				return ret;
-			return put_user(raddr, (ulong *) third);
-		}
-		case 1:	/* iBCS2 emulator entry point */
-			if (!segment_eq(get_fs(), get_ds()))
-				return -EINVAL;
-			return do_shmat(first, (char __user *) ptr, second,
-					(ulong *) third);
-		}
-	case SHMDT:
-		return sys_shmdt((char __user *)ptr);
-	case SHMGET:
-		return sys_shmget(first, second, third);
-	case SHMCTL:
-		return sys_shmctl(first, second,
-				  (struct shmid_ds __user *) ptr);
-	default:
-		return -EINVAL;
-	}
-}
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index f388dc68f605..9c4da3d63bfb 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -95,6 +95,9 @@ config PM
 config STACKTRACE_SUPPORT
 	def_bool y
 
+config NEED_DMA_MAP_STATE
+	def_bool y
+
 config ISA_DMA_API
 	bool
 
diff --git a/arch/parisc/include/asm/compat.h b/arch/parisc/include/asm/compat.h
index 7f32611a7a5e..02b77baa5da6 100644
--- a/arch/parisc/include/asm/compat.h
+++ b/arch/parisc/include/asm/compat.h
@@ -7,7 +7,8 @@
 #include <linux/sched.h>
 #include <linux/thread_info.h>
 
-#define COMPAT_USER_HZ 100
+#define COMPAT_USER_HZ 		100
+#define COMPAT_UTS_MACHINE	"parisc\0\0"
 
 typedef u32	compat_size_t;
 typedef s32	compat_ssize_t;
diff --git a/arch/parisc/include/asm/pci.h b/arch/parisc/include/asm/pci.h
index 64c7aa590ae5..2242a5c636c2 100644
--- a/arch/parisc/include/asm/pci.h
+++ b/arch/parisc/include/asm/pci.h
@@ -183,20 +183,6 @@ struct pci_bios_ops {
 	void (*fixup_bus)(struct pci_bus *bus);
 };
 
-/* pci_unmap_{single,page} is not a nop, thus... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
-	dma_addr_t ADDR_NAME;
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
-	__u32 LEN_NAME;
-#define pci_unmap_addr(PTR, ADDR_NAME)			\
-	((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
-	(((PTR)->ADDR_NAME) = (VAL))
-#define pci_unmap_len(PTR, LEN_NAME)			\
-	((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
-	(((PTR)->LEN_NAME) = (VAL))
-
 /*
 ** Stuff declared in arch/parisc/kernel/pci.c
 */
diff --git a/arch/parisc/include/asm/ptrace.h b/arch/parisc/include/asm/ptrace.h
index aead40b16dd8..7f09533da771 100644
--- a/arch/parisc/include/asm/ptrace.h
+++ b/arch/parisc/include/asm/ptrace.h
@@ -47,13 +47,8 @@ struct pt_regs {
 
 #define task_regs(task) ((struct pt_regs *) ((char *)(task) + TASK_REGS))
 
-struct task_struct;
 #define arch_has_single_step()	1
-void user_disable_single_step(struct task_struct *task);
-void user_enable_single_step(struct task_struct *task);
-
 #define arch_has_block_step()	1
-void user_enable_block_step(struct task_struct *task);
 
 /* XXX should we use iaoq[1] or iaoq[0] ? */
 #define user_mode(regs)			(((regs)->iaoq[0] & 3) ? 1 : 0)
diff --git a/arch/parisc/kernel/sys_parisc.c b/arch/parisc/kernel/sys_parisc.c
index 9147391afb03..c9b932260f47 100644
--- a/arch/parisc/kernel/sys_parisc.c
+++ b/arch/parisc/kernel/sys_parisc.c
@@ -234,18 +234,3 @@ long parisc_personality(unsigned long personality)
 
 	return err;
 }
-
-long parisc_newuname(struct new_utsname __user *name)
-{
-	int err = sys_newuname(name);
-
-#ifdef CONFIG_COMPAT
-	if (!err && personality(current->personality) == PER_LINUX32) {
-		if (__put_user(0, name->machine + 6) ||
-		    __put_user(0, name->machine + 7))
-			err = -EFAULT;
-	}
-#endif
-
-	return err;
-}
diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S
index de5f6dab48b7..3d52c978738f 100644
--- a/arch/parisc/kernel/syscall_table.S
+++ b/arch/parisc/kernel/syscall_table.S
@@ -127,7 +127,7 @@
 	ENTRY_SAME(socketpair)
 	ENTRY_SAME(setpgid)
 	ENTRY_SAME(send)
-	ENTRY_OURS(newuname)
+	ENTRY_SAME(newuname)
 	ENTRY_SAME(umask)		/* 60 */
 	ENTRY_SAME(chroot)
 	ENTRY_COMP(ustat)
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 155d571f5e26..2e19500921f9 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -313,19 +313,6 @@ config 8XX_MINIMAL_FPEMU
 
 	  It is recommended that you build a soft-float userspace instead.
 
-config IOMMU_VMERGE
-	bool "Enable IOMMU virtual merging"
-	depends on PPC64
-	default y
-	help
-	  Cause IO segments sent to a device for DMA to be merged virtually
-	  by the IOMMU when they happen to have been allocated contiguously.
-	  This doesn't add pressure to the IOMMU allocator. However, some
-	  drivers don't support getting large merged segments coming back
-	  from *_map_sg().
-
-	  Most drivers don't have this problem; it is safe to say Y here.
-
 config IOMMU_HELPER
 	def_bool PPC64
 
@@ -672,6 +659,9 @@ config ZONE_DMA
 	bool
 	default y
 
+config NEED_DMA_MAP_STATE
+	def_bool (PPC64 || NOT_COHERENT_CACHE)
+
 config GENERIC_ISA_DMA
 	bool
 	depends on PPC64 || POWER4 || 6xx && !CPM2
diff --git a/arch/powerpc/boot/dts/gef_ppc9a.dts b/arch/powerpc/boot/dts/gef_ppc9a.dts
index 977f260d5e64..83f4b79dff85 100644
--- a/arch/powerpc/boot/dts/gef_ppc9a.dts
+++ b/arch/powerpc/boot/dts/gef_ppc9a.dts
@@ -1,7 +1,7 @@
 /*
- * GE Fanuc PPC9A Device Tree Source
+ * GE PPC9A Device Tree Source
  *
- * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
diff --git a/arch/powerpc/boot/dts/gef_sbc310.dts b/arch/powerpc/boot/dts/gef_sbc310.dts
index 8e4efff3bda1..fc3a331dd392 100644
--- a/arch/powerpc/boot/dts/gef_sbc310.dts
+++ b/arch/powerpc/boot/dts/gef_sbc310.dts
@@ -1,7 +1,7 @@
 /*
- * GE Fanuc SBC310 Device Tree Source
+ * GE SBC310 Device Tree Source
  *
- * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
diff --git a/arch/powerpc/boot/dts/gef_sbc610.dts b/arch/powerpc/boot/dts/gef_sbc610.dts
index bb7060078fb4..c0671cc98125 100644
--- a/arch/powerpc/boot/dts/gef_sbc610.dts
+++ b/arch/powerpc/boot/dts/gef_sbc610.dts
@@ -1,7 +1,7 @@
 /*
- * GE Fanuc SBC610 Device Tree Source
+ * GE SBC610 Device Tree Source
  *
- * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
diff --git a/arch/powerpc/boot/dts/kmeter1.dts b/arch/powerpc/boot/dts/kmeter1.dts
index 65b8b4f27efe..d8b5d12fb663 100644
--- a/arch/powerpc/boot/dts/kmeter1.dts
+++ b/arch/powerpc/boot/dts/kmeter1.dts
@@ -490,7 +490,7 @@
 			compatible = "cfi-flash";
 			/*
 			 * The Intel P30 chip has 2 non-identical chips on
-			 * one die, so we need to define 2 seperate regions
+			 * one die, so we need to define 2 separate regions
 			 * that are scanned by physmap_of independantly.
 			 */
 			reg = <0 0x00000000 0x02000000
diff --git a/arch/powerpc/configs/52xx/cm5200_defconfig b/arch/powerpc/configs/52xx/cm5200_defconfig
index ff9bdb28197d..218d49b36a0c 100644
--- a/arch/powerpc/configs/52xx/cm5200_defconfig
+++ b/arch/powerpc/configs/52xx/cm5200_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Wed Dec 30 14:45:07 2009
+# Linux kernel version: 2.6.34-rc1
+# Wed Mar 10 14:34:22 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -94,11 +94,6 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -109,6 +104,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -340,7 +336,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
@@ -517,6 +512,8 @@ CONFIG_MTD_PHYSMAP_OF=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_MDIO=y
@@ -684,6 +681,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_MPC52xx=y
 CONFIG_SERIAL_MPC52xx_CONSOLE=y
 CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=57600
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -714,6 +712,7 @@ CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -754,6 +753,7 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_MAX63XX_WATCHDOG is not set
 # CONFIG_MPC5200_WDT is not set
 
 #
@@ -771,18 +771,20 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -813,7 +815,6 @@ CONFIG_USB=y
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
@@ -891,7 +892,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -903,7 +903,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -1009,6 +1008,7 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
diff --git a/arch/powerpc/configs/52xx/lite5200b_defconfig b/arch/powerpc/configs/52xx/lite5200b_defconfig
index 7b3f4d0ed404..90492ff25232 100644
--- a/arch/powerpc/configs/52xx/lite5200b_defconfig
+++ b/arch/powerpc/configs/52xx/lite5200b_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Wed Dec 30 14:45:09 2009
+# Linux kernel version: 2.6.34-rc1
+# Wed Mar 10 14:34:24 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -95,11 +95,6 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -110,6 +105,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -317,6 +313,7 @@ CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 # CONFIG_HIBERNATION is not set
 # CONFIG_PM_RUNTIME is not set
+CONFIG_PM_OPS=y
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
@@ -333,7 +330,6 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
@@ -360,7 +356,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
@@ -457,6 +452,8 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_MDIO=y
@@ -631,6 +628,7 @@ CONFIG_ATA_SFF=y
 # CONFIG_PATA_IT821X is not set
 # CONFIG_PATA_IT8213 is not set
 # CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
 CONFIG_PATA_MPC52xx=y
@@ -668,7 +666,7 @@ CONFIG_PATA_MPC52xx=y
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -768,6 +766,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
@@ -828,6 +827,7 @@ CONFIG_SERIAL_MPC52xx=y
 CONFIG_SERIAL_MPC52xx_CONSOLE=y
 CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -879,6 +879,7 @@ CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -924,18 +925,21 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -944,6 +948,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_AGP is not set
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -1062,6 +1067,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
diff --git a/arch/powerpc/configs/52xx/motionpro_defconfig b/arch/powerpc/configs/52xx/motionpro_defconfig
index eaae2d469aa0..dffc8cac825f 100644
--- a/arch/powerpc/configs/52xx/motionpro_defconfig
+++ b/arch/powerpc/configs/52xx/motionpro_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Wed Dec 30 14:45:08 2009
+# Linux kernel version: 2.6.34-rc1
+# Wed Mar 10 14:34:23 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -94,11 +94,6 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -109,6 +104,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -341,7 +337,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
@@ -518,6 +513,8 @@ CONFIG_MTD_ROM=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_MDIO=y
@@ -699,6 +696,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_MPC52xx=y
 CONFIG_SERIAL_MPC52xx_CONSOLE=y
 CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -728,6 +726,7 @@ CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -773,10 +772,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
@@ -811,6 +811,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_TMP421 is not set
@@ -831,6 +832,7 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_MAX63XX_WATCHDOG is not set
 # CONFIG_MPC5200_WDT is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -843,18 +845,20 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1050,6 +1054,7 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
diff --git a/arch/powerpc/configs/52xx/pcm030_defconfig b/arch/powerpc/configs/52xx/pcm030_defconfig
index 1742c0200b75..3cb2a522046a 100644
--- a/arch/powerpc/configs/52xx/pcm030_defconfig
+++ b/arch/powerpc/configs/52xx/pcm030_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Wed Dec 30 14:45:10 2009
+# Linux kernel version: 2.6.34-rc1
+# Wed Mar 10 14:34:25 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -97,11 +97,6 @@ CONFIG_RCU_FANOUT=32
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -326,7 +321,6 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
@@ -352,7 +346,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -525,6 +518,8 @@ CONFIG_MTD_PHYSMAP=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_MDIO=y
@@ -610,6 +605,7 @@ CONFIG_ATA_SFF=y
 # CONFIG_PATA_IT821X is not set
 # CONFIG_PATA_IT8213 is not set
 # CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
 CONFIG_PATA_MPC52xx=m
@@ -647,7 +643,7 @@ CONFIG_PATA_MPC52xx=m
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -775,6 +771,7 @@ CONFIG_SERIAL_MPC52xx=y
 CONFIG_SERIAL_MPC52xx_CONSOLE=y
 CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=9600
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -824,6 +821,7 @@ CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -870,18 +868,21 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -890,6 +891,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_AGP is not set
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -997,7 +999,6 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1009,7 +1010,6 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -1172,6 +1172,7 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig
index 3972438db719..96181c62abfa 100644
--- a/arch/powerpc/configs/52xx/tqm5200_defconfig
+++ b/arch/powerpc/configs/52xx/tqm5200_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Wed Dec 30 14:45:09 2009
+# Linux kernel version: 2.6.34-rc1
+# Wed Mar 10 14:34:24 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -94,11 +94,6 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -109,6 +104,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -346,7 +342,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
@@ -524,6 +519,8 @@ CONFIG_MTD_PHYSMAP_OF=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_MDIO=y
@@ -704,6 +701,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_MPC52xx=y
 CONFIG_SERIAL_MPC52xx_CONSOLE=y
 CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -733,6 +731,7 @@ CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -780,10 +779,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
@@ -818,6 +818,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_TMP421 is not set
@@ -838,6 +839,7 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_MAX63XX_WATCHDOG is not set
 # CONFIG_MPC5200_WDT is not set
 
 #
@@ -855,18 +857,20 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -897,7 +901,6 @@ CONFIG_USB=y
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
@@ -975,7 +978,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -987,7 +989,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -1151,6 +1152,7 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig
index 61cf73d0000f..7012ac0134f0 100644
--- a/arch/powerpc/configs/mpc5200_defconfig
+++ b/arch/powerpc/configs/mpc5200_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Wed Dec 30 15:08:52 2009
+# Linux kernel version: 2.6.34-rc1
+# Wed Mar 10 14:38:54 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -96,30 +96,37 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_KALLSYMS is not set
+# CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
@@ -141,6 +148,7 @@ CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -320,6 +328,7 @@ CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 # CONFIG_HIBERNATION is not set
 # CONFIG_PM_RUNTIME is not set
+CONFIG_PM_OPS=y
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
@@ -336,7 +345,6 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
@@ -363,7 +371,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
@@ -454,7 +461,9 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -554,6 +563,8 @@ CONFIG_MTD_UBI_BEB_RESERVE=1
 # UBI debugging options
 #
 # CONFIG_MTD_UBI_DEBUG is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
@@ -732,6 +743,7 @@ CONFIG_ATA_SFF=y
 # CONFIG_PATA_IT821X is not set
 # CONFIG_PATA_IT8213 is not set
 # CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
 CONFIG_PATA_MPC52xx=y
@@ -770,7 +782,7 @@ CONFIG_PATA_PLATFORM=y
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -929,6 +941,7 @@ CONFIG_SERIAL_MPC52xx=y
 CONFIG_SERIAL_MPC52xx_CONSOLE=y
 CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -981,6 +994,7 @@ CONFIG_I2C_ALGOBIT=y
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -1010,9 +1024,9 @@ CONFIG_SPI_MASTER=y
 #
 # SPI Master Controller Drivers
 #
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-# CONFIG_SPI_MPC52xx is not set
+CONFIG_SPI_BITBANG=m
+CONFIG_SPI_GPIO=m
+CONFIG_SPI_MPC52xx=m
 CONFIG_SPI_MPC52xx_PSC=m
 # CONFIG_SPI_XILINX is not set
 # CONFIG_SPI_DESIGNWARE is not set
@@ -1036,14 +1050,18 @@ CONFIG_GPIOLIB=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
 # CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX7300 is not set
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
 # PCI GPIO expanders:
@@ -1080,10 +1098,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -1123,6 +1142,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_TMP421 is not set
@@ -1147,6 +1167,7 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_MAX63XX_WATCHDOG is not set
 # CONFIG_ALIM7101_WDT is not set
 # CONFIG_MPC5200_WDT is not set
 # CONFIG_WATCHDOG_RTAS is not set
@@ -1172,22 +1193,27 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
 # CONFIG_AB4500_CORE is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1196,6 +1222,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_AGP is not set
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 CONFIG_DRM=y
 # CONFIG_DRM_TDFX is not set
 # CONFIG_DRM_R128 is not set
@@ -1309,32 +1336,46 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
+# CONFIG_HID_3M_PCT is not set
 CONFIG_HID_A4TECH=y
-# CONFIG_HID_APPLE is not set
+CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
-# CONFIG_HID_CHICONY is not set
+CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_HID_DRAGONRISE is not set
+CONFIG_HID_DRAGONRISE=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
+CONFIG_HID_KYE=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_TWINHAN=y
+CONFIG_HID_KENSINGTON=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
+CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
+CONFIG_HID_MONTEREY=y
 # CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
+CONFIG_HID_ORTEK=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+# CONFIG_HID_QUANTA is not set
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+# CONFIG_HID_STANTUM is not set
+CONFIG_HID_SUNPLUS=y
+CONFIG_HID_GREENASIA=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_SMARTJOYPLUS=y
+# CONFIG_SMARTJOYPLUS_FF is not set
+CONFIG_HID_TOPSEED=y
+CONFIG_HID_THRUSTMASTER=y
+# CONFIG_THRUSTMASTER_FF is not set
+CONFIG_HID_ZEROPLUS=y
+# CONFIG_ZEROPLUS_FF is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1349,10 +1390,7 @@ CONFIG_USB=y
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
 # CONFIG_USB_WUSB is not set
 # CONFIG_USB_WUSB_CBAF is not set
@@ -1433,7 +1471,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1445,7 +1482,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -1636,6 +1672,7 @@ CONFIG_UBIFS_FS=m
 CONFIG_UBIFS_FS_LZO=y
 CONFIG_UBIFS_FS_ZLIB=y
 # CONFIG_UBIFS_FS_DEBUG is not set
+# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1730,8 +1767,11 @@ CONFIG_CRC32=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
+CONFIG_LZO_DECOMPRESS=y
 CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
@@ -1776,11 +1816,11 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
diff --git a/arch/powerpc/include/asm/compat.h b/arch/powerpc/include/asm/compat.h
index 4774c2f92232..396d21a80058 100644
--- a/arch/powerpc/include/asm/compat.h
+++ b/arch/powerpc/include/asm/compat.h
@@ -7,7 +7,8 @@
 #include <linux/types.h>
 #include <linux/sched.h>
 
-#define COMPAT_USER_HZ	100
+#define COMPAT_USER_HZ		100
+#define COMPAT_UTS_MACHINE	"ppc\0\0"
 
 typedef u32		compat_size_t;
 typedef s32		compat_ssize_t;
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index 80a973bb9e71..c85ef230135b 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -127,9 +127,6 @@ static inline int dma_supported(struct device *dev, u64 mask)
 	return dma_ops->dma_supported(dev, mask);
 }
 
-/* We have our own implementation of pci_set_dma_mask() */
-#define HAVE_ARCH_PCI_SET_DMA_MASK
-
 static inline int dma_set_mask(struct device *dev, u64 dma_mask)
 {
 	struct dma_map_ops *dma_ops = get_dma_ops(dev);
diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h
index d8a693109c82..a011603d4079 100644
--- a/arch/powerpc/include/asm/paca.h
+++ b/arch/powerpc/include/asm/paca.h
@@ -14,6 +14,9 @@
 #define _ASM_POWERPC_PACA_H
 #ifdef __KERNEL__
 
+#ifdef CONFIG_PPC64
+
+#include <linux/init.h>
 #include <asm/types.h>
 #include <asm/lppaca.h>
 #include <asm/mmu.h>
@@ -145,8 +148,19 @@ struct paca_struct {
 #endif
 };
 
-extern struct paca_struct paca[];
-extern void initialise_pacas(void);
+extern struct paca_struct *paca;
+extern __initdata struct paca_struct boot_paca;
+extern void initialise_paca(struct paca_struct *new_paca, int cpu);
+
+extern void allocate_pacas(void);
+extern void free_unused_pacas(void);
+
+#else /* CONFIG_PPC64 */
+
+static inline void allocate_pacas(void) { };
+static inline void free_unused_pacas(void) { };
+
+#endif /* CONFIG_PPC64 */
 
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_PACA_H */
diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h
index b5ea626eea2d..a20a9ad2258b 100644
--- a/arch/powerpc/include/asm/pci.h
+++ b/arch/powerpc/include/asm/pci.h
@@ -141,38 +141,6 @@ extern int pci_mmap_legacy_page_range(struct pci_bus *bus,
 
 #define HAVE_PCI_LEGACY	1
 
-#if defined(CONFIG_PPC64) || defined(CONFIG_NOT_COHERENT_CACHE)
-/*
- * For 64-bit kernels, pci_unmap_{single,page} is not a nop.
- * For 32-bit non-coherent kernels, pci_dma_sync_single_for_cpu() and
- * so on are not nops.
- * and thus...
- */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
-	dma_addr_t ADDR_NAME;
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
-	__u32 LEN_NAME;
-#define pci_unmap_addr(PTR, ADDR_NAME)			\
-	((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
-	(((PTR)->ADDR_NAME) = (VAL))
-#define pci_unmap_len(PTR, LEN_NAME)			\
-	((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
-	(((PTR)->LEN_NAME) = (VAL))
-
-#else /* 32-bit && coherent */
-
-/* pci_unmap_{page,single} is a nop so... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
-#define pci_unmap_addr(PTR, ADDR_NAME)		(0)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	do { } while (0)
-#define pci_unmap_len(PTR, LEN_NAME)		(0)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0)
-
-#endif /* CONFIG_PPC64 || CONFIG_NOT_COHERENT_CACHE */
-
 #ifdef CONFIG_PPC64
 
 /* The PCI address space does not equal the physical memory address
diff --git a/arch/powerpc/include/asm/perf_event.h b/arch/powerpc/include/asm/perf_event.h
index 3288ce3997e0..e6d4ce69b126 100644
--- a/arch/powerpc/include/asm/perf_event.h
+++ b/arch/powerpc/include/asm/perf_event.h
@@ -1,110 +1,23 @@
 /*
- * Performance event support - PowerPC-specific definitions.
+ * Performance event support - hardware-specific disambiguation
  *
- * Copyright 2008-2009 Paul Mackerras, IBM Corporation.
+ * For now this is a compile-time decision, but eventually it should be
+ * runtime.  This would allow multiplatform perf event support for e300 (fsl
+ * embedded perf counters) plus server/classic, and would accommodate
+ * devices other than the core which provide their own performance counters.
+ *
+ * Copyright 2010 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version
  * 2 of the License, or (at your option) any later version.
  */
-#include <linux/types.h>
-
-#include <asm/hw_irq.h>
-
-#define MAX_HWEVENTS		8
-#define MAX_EVENT_ALTERNATIVES	8
-#define MAX_LIMITED_HWCOUNTERS	2
-
-/*
- * This struct provides the constants and functions needed to
- * describe the PMU on a particular POWER-family CPU.
- */
-struct power_pmu {
-	const char	*name;
-	int		n_counter;
-	int		max_alternatives;
-	unsigned long	add_fields;
-	unsigned long	test_adder;
-	int		(*compute_mmcr)(u64 events[], int n_ev,
-				unsigned int hwc[], unsigned long mmcr[]);
-	int		(*get_constraint)(u64 event_id, unsigned long *mskp,
-				unsigned long *valp);
-	int		(*get_alternatives)(u64 event_id, unsigned int flags,
-				u64 alt[]);
-	void		(*disable_pmc)(unsigned int pmc, unsigned long mmcr[]);
-	int		(*limited_pmc_event)(u64 event_id);
-	u32		flags;
-	int		n_generic;
-	int		*generic_events;
-	int		(*cache_events)[PERF_COUNT_HW_CACHE_MAX]
-			       [PERF_COUNT_HW_CACHE_OP_MAX]
-			       [PERF_COUNT_HW_CACHE_RESULT_MAX];
-};
-
-/*
- * Values for power_pmu.flags
- */
-#define PPMU_LIMITED_PMC5_6	1	/* PMC5/6 have limited function */
-#define PPMU_ALT_SIPR		2	/* uses alternate posn for SIPR/HV */
-
-/*
- * Values for flags to get_alternatives()
- */
-#define PPMU_LIMITED_PMC_OK	1	/* can put this on a limited PMC */
-#define PPMU_LIMITED_PMC_REQD	2	/* have to put this on a limited PMC */
-#define PPMU_ONLY_COUNT_RUN	4	/* only counting in run state */
-
-extern int register_power_pmu(struct power_pmu *);
 
-struct pt_regs;
-extern unsigned long perf_misc_flags(struct pt_regs *regs);
-extern unsigned long perf_instruction_pointer(struct pt_regs *regs);
-
-#define PERF_EVENT_INDEX_OFFSET	1
-
-/*
- * Only override the default definitions in include/linux/perf_event.h
- * if we have hardware PMU support.
- */
 #ifdef CONFIG_PPC_PERF_CTRS
-#define perf_misc_flags(regs)	perf_misc_flags(regs)
+#include <asm/perf_event_server.h>
 #endif
 
-/*
- * The power_pmu.get_constraint function returns a 32/64-bit value and
- * a 32/64-bit mask that express the constraints between this event_id and
- * other events.
- *
- * The value and mask are divided up into (non-overlapping) bitfields
- * of three different types:
- *
- * Select field: this expresses the constraint that some set of bits
- * in MMCR* needs to be set to a specific value for this event_id.  For a
- * select field, the mask contains 1s in every bit of the field, and
- * the value contains a unique value for each possible setting of the
- * MMCR* bits.  The constraint checking code will ensure that two events
- * that set the same field in their masks have the same value in their
- * value dwords.
- *
- * Add field: this expresses the constraint that there can be at most
- * N events in a particular class.  A field of k bits can be used for
- * N <= 2^(k-1) - 1.  The mask has the most significant bit of the field
- * set (and the other bits 0), and the value has only the least significant
- * bit of the field set.  In addition, the 'add_fields' and 'test_adder'
- * in the struct power_pmu for this processor come into play.  The
- * add_fields value contains 1 in the LSB of the field, and the
- * test_adder contains 2^(k-1) - 1 - N in the field.
- *
- * NAND field: this expresses the constraint that you may not have events
- * in all of a set of classes.  (For example, on PPC970, you can't select
- * events from the FPU, ISU and IDU simultaneously, although any two are
- * possible.)  For N classes, the field is N+1 bits wide, and each class
- * is assigned one bit from the least-significant N bits.  The mask has
- * only the most-significant bit set, and the value has only the bit
- * for the event_id's class set.  The test_adder has the least significant
- * bit set in the field.
- *
- * If an event_id is not subject to the constraint expressed by a particular
- * field, then it will have 0 in both the mask and value for that field.
- */
+#ifdef CONFIG_FSL_EMB_PERF_EVENT
+#include <asm/perf_event_fsl_emb.h>
+#endif
diff --git a/arch/powerpc/include/asm/perf_event_fsl_emb.h b/arch/powerpc/include/asm/perf_event_fsl_emb.h
new file mode 100644
index 000000000000..718a9fa94e68
--- /dev/null
+++ b/arch/powerpc/include/asm/perf_event_fsl_emb.h
@@ -0,0 +1,50 @@
+/*
+ * Performance event support - Freescale embedded specific definitions.
+ *
+ * Copyright 2008-2009 Paul Mackerras, IBM Corporation.
+ * Copyright 2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/types.h>
+#include <asm/hw_irq.h>
+
+#define MAX_HWEVENTS 4
+
+/* event flags */
+#define FSL_EMB_EVENT_VALID      1
+#define FSL_EMB_EVENT_RESTRICTED 2
+
+/* upper half of event flags is PMLCb */
+#define FSL_EMB_EVENT_THRESHMUL  0x0000070000000000ULL
+#define FSL_EMB_EVENT_THRESH     0x0000003f00000000ULL
+
+struct fsl_emb_pmu {
+	const char	*name;
+	int		n_counter; /* total number of counters */
+
+	/*
+	 * The number of contiguous counters starting at zero that
+	 * can hold restricted events, or zero if there are no
+	 * restricted events.
+	 *
+	 * This isn't a very flexible method of expressing constraints,
+	 * but it's very simple and is adequate for existing chips.
+	 */
+	int		n_restricted;
+
+	/* Returns event flags and PMLCb (FSL_EMB_EVENT_*) */
+	u64		(*xlate_event)(u64 event_id);
+
+	int		n_generic;
+	int		*generic_events;
+	int		(*cache_events)[PERF_COUNT_HW_CACHE_MAX]
+			       [PERF_COUNT_HW_CACHE_OP_MAX]
+			       [PERF_COUNT_HW_CACHE_RESULT_MAX];
+};
+
+int register_fsl_emb_pmu(struct fsl_emb_pmu *);
diff --git a/arch/powerpc/include/asm/perf_event_server.h b/arch/powerpc/include/asm/perf_event_server.h
new file mode 100644
index 000000000000..8f1df1208d23
--- /dev/null
+++ b/arch/powerpc/include/asm/perf_event_server.h
@@ -0,0 +1,110 @@
+/*
+ * Performance event support - PowerPC classic/server specific definitions.
+ *
+ * Copyright 2008-2009 Paul Mackerras, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/types.h>
+#include <asm/hw_irq.h>
+
+#define MAX_HWEVENTS		8
+#define MAX_EVENT_ALTERNATIVES	8
+#define MAX_LIMITED_HWCOUNTERS	2
+
+/*
+ * This struct provides the constants and functions needed to
+ * describe the PMU on a particular POWER-family CPU.
+ */
+struct power_pmu {
+	const char	*name;
+	int		n_counter;
+	int		max_alternatives;
+	unsigned long	add_fields;
+	unsigned long	test_adder;
+	int		(*compute_mmcr)(u64 events[], int n_ev,
+				unsigned int hwc[], unsigned long mmcr[]);
+	int		(*get_constraint)(u64 event_id, unsigned long *mskp,
+				unsigned long *valp);
+	int		(*get_alternatives)(u64 event_id, unsigned int flags,
+				u64 alt[]);
+	void		(*disable_pmc)(unsigned int pmc, unsigned long mmcr[]);
+	int		(*limited_pmc_event)(u64 event_id);
+	u32		flags;
+	int		n_generic;
+	int		*generic_events;
+	int		(*cache_events)[PERF_COUNT_HW_CACHE_MAX]
+			       [PERF_COUNT_HW_CACHE_OP_MAX]
+			       [PERF_COUNT_HW_CACHE_RESULT_MAX];
+};
+
+/*
+ * Values for power_pmu.flags
+ */
+#define PPMU_LIMITED_PMC5_6	1	/* PMC5/6 have limited function */
+#define PPMU_ALT_SIPR		2	/* uses alternate posn for SIPR/HV */
+
+/*
+ * Values for flags to get_alternatives()
+ */
+#define PPMU_LIMITED_PMC_OK	1	/* can put this on a limited PMC */
+#define PPMU_LIMITED_PMC_REQD	2	/* have to put this on a limited PMC */
+#define PPMU_ONLY_COUNT_RUN	4	/* only counting in run state */
+
+extern int register_power_pmu(struct power_pmu *);
+
+struct pt_regs;
+extern unsigned long perf_misc_flags(struct pt_regs *regs);
+extern unsigned long perf_instruction_pointer(struct pt_regs *regs);
+
+#define PERF_EVENT_INDEX_OFFSET	1
+
+/*
+ * Only override the default definitions in include/linux/perf_event.h
+ * if we have hardware PMU support.
+ */
+#ifdef CONFIG_PPC_PERF_CTRS
+#define perf_misc_flags(regs)	perf_misc_flags(regs)
+#endif
+
+/*
+ * The power_pmu.get_constraint function returns a 32/64-bit value and
+ * a 32/64-bit mask that express the constraints between this event_id and
+ * other events.
+ *
+ * The value and mask are divided up into (non-overlapping) bitfields
+ * of three different types:
+ *
+ * Select field: this expresses the constraint that some set of bits
+ * in MMCR* needs to be set to a specific value for this event_id.  For a
+ * select field, the mask contains 1s in every bit of the field, and
+ * the value contains a unique value for each possible setting of the
+ * MMCR* bits.  The constraint checking code will ensure that two events
+ * that set the same field in their masks have the same value in their
+ * value dwords.
+ *
+ * Add field: this expresses the constraint that there can be at most
+ * N events in a particular class.  A field of k bits can be used for
+ * N <= 2^(k-1) - 1.  The mask has the most significant bit of the field
+ * set (and the other bits 0), and the value has only the least significant
+ * bit of the field set.  In addition, the 'add_fields' and 'test_adder'
+ * in the struct power_pmu for this processor come into play.  The
+ * add_fields value contains 1 in the LSB of the field, and the
+ * test_adder contains 2^(k-1) - 1 - N in the field.
+ *
+ * NAND field: this expresses the constraint that you may not have events
+ * in all of a set of classes.  (For example, on PPC970, you can't select
+ * events from the FPU, ISU and IDU simultaneously, although any two are
+ * possible.)  For N classes, the field is N+1 bits wide, and each class
+ * is assigned one bit from the least-significant N bits.  The mask has
+ * only the most-significant bit set, and the value has only the bit
+ * for the event_id's class set.  The test_adder has the least significant
+ * bit set in the field.
+ *
+ * If an event_id is not subject to the constraint expressed by a particular
+ * field, then it will have 0 in both the mask and value for that field.
+ */
diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h
index aea714797590..d553bbeb726c 100644
--- a/arch/powerpc/include/asm/ppc-opcode.h
+++ b/arch/powerpc/include/asm/ppc-opcode.h
@@ -25,7 +25,7 @@
 #define PPC_INST_LDARX			0x7c0000a8
 #define PPC_INST_LSWI			0x7c0004aa
 #define PPC_INST_LSWX			0x7c00042a
-#define PPC_INST_LWARX			0x7c000029
+#define PPC_INST_LWARX			0x7c000028
 #define PPC_INST_LWSYNC			0x7c2004ac
 #define PPC_INST_LXVD2X			0x7c000698
 #define PPC_INST_MCRXR			0x7c000400
@@ -62,8 +62,8 @@
 #define __PPC_T_TLB(t)	(((t) & 0x3) << 21)
 #define __PPC_WC(w)	(((w) & 0x3) << 21)
 /*
- * Only use the larx hint bit on 64bit CPUs. Once we verify it doesn't have
- * any side effects on all 32bit processors, we can do this all the time.
+ * Only use the larx hint bit on 64bit CPUs. e500v1/v2 based CPUs will treat a
+ * larx with EH set as an illegal instruction.
  */
 #ifdef CONFIG_PPC64
 #define __PPC_EH(eh)	(((eh) & 0x1) << 0)
diff --git a/arch/powerpc/include/asm/ptrace.h b/arch/powerpc/include/asm/ptrace.h
index b45108126562..9e2d84c06b74 100644
--- a/arch/powerpc/include/asm/ptrace.h
+++ b/arch/powerpc/include/asm/ptrace.h
@@ -137,15 +137,8 @@ do {									      \
 } while (0)
 #endif /* __powerpc64__ */
 
-/*
- * These are defined as per linux/ptrace.h, which see.
- */
 #define arch_has_single_step()	(1)
 #define arch_has_block_step()	(!cpu_has_feature(CPU_FTR_601))
-extern void user_enable_single_step(struct task_struct *);
-extern void user_enable_block_step(struct task_struct *);
-extern void user_disable_single_step(struct task_struct *);
-
 #define ARCH_HAS_USER_SINGLE_STEP_INFO
 
 #endif /* __ASSEMBLY__ */
diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h
index 8808d307fe7e..414d434a66d0 100644
--- a/arch/powerpc/include/asm/reg_booke.h
+++ b/arch/powerpc/include/asm/reg_booke.h
@@ -421,8 +421,8 @@
 /* Bit definitions related to the DBCR2. */
 #define DBCR2_DAC1US	0xC0000000	/* Data Addr Cmp 1 Sup/User   */
 #define DBCR2_DAC1ER	0x30000000	/* Data Addr Cmp 1 Eff/Real */
-#define DBCR2_DAC2US	0x00000000	/* Data Addr Cmp 2 Sup/User   */
-#define DBCR2_DAC2ER	0x00000000	/* Data Addr Cmp 2 Eff/Real */
+#define DBCR2_DAC2US	0x0C000000	/* Data Addr Cmp 2 Sup/User   */
+#define DBCR2_DAC2ER	0x03000000	/* Data Addr Cmp 2 Eff/Real */
 #define DBCR2_DAC12M	0x00800000	/* DAC 1-2 range enable */
 #define DBCR2_DAC12MM	0x00400000	/* DAC 1-2 Mask mode*/
 #define DBCR2_DAC12MX	0x00C00000	/* DAC 1-2 range eXclusive */
diff --git a/arch/powerpc/include/asm/reg_fsl_emb.h b/arch/powerpc/include/asm/reg_fsl_emb.h
index 0de404dfee8b..77bb71cfd991 100644
--- a/arch/powerpc/include/asm/reg_fsl_emb.h
+++ b/arch/powerpc/include/asm/reg_fsl_emb.h
@@ -31,7 +31,7 @@
 #define PMLCA_FCM0	0x08000000	/* Freeze when PMM==0 */
 #define PMLCA_CE	0x04000000	/* Condition Enable */
 
-#define PMLCA_EVENT_MASK 0x007f0000	/* Event field */
+#define PMLCA_EVENT_MASK 0x00ff0000	/* Event field */
 #define PMLCA_EVENT_SHIFT	16
 
 #define PMRN_PMLCB0	0x110	/* PM Local Control B0 */
diff --git a/arch/powerpc/include/asm/syscall.h b/arch/powerpc/include/asm/syscall.h
index efa7f0b879f3..23913e902fc3 100644
--- a/arch/powerpc/include/asm/syscall.h
+++ b/arch/powerpc/include/asm/syscall.h
@@ -30,7 +30,7 @@ static inline void syscall_rollback(struct task_struct *task,
 static inline long syscall_get_error(struct task_struct *task,
 				     struct pt_regs *regs)
 {
-	return (regs->ccr & 0x1000) ? -regs->gpr[3] : 0;
+	return (regs->ccr & 0x10000000) ? -regs->gpr[3] : 0;
 }
 
 static inline long syscall_get_return_value(struct task_struct *task,
@@ -44,10 +44,10 @@ static inline void syscall_set_return_value(struct task_struct *task,
 					    int error, long val)
 {
 	if (error) {
-		regs->ccr |= 0x1000L;
+		regs->ccr |= 0x10000000L;
 		regs->gpr[3] = -error;
 	} else {
-		regs->ccr &= ~0x1000L;
+		regs->ccr &= ~0x10000000L;
 		regs->gpr[3] = val;
 	}
 }
diff --git a/arch/powerpc/include/asm/syscalls.h b/arch/powerpc/include/asm/syscalls.h
index eb8eb400c664..4084e567d28e 100644
--- a/arch/powerpc/include/asm/syscalls.h
+++ b/arch/powerpc/include/asm/syscalls.h
@@ -7,7 +7,6 @@
 #include <linux/types.h>
 #include <asm/signal.h>
 
-struct new_utsname;
 struct pt_regs;
 struct rtas_args;
 struct sigaction;
@@ -35,12 +34,9 @@ asmlinkage long sys_pipe2(int __user *fildes, int flags);
 asmlinkage long sys_rt_sigaction(int sig,
 		const struct sigaction __user *act,
 		struct sigaction __user *oact, size_t sigsetsize);
-asmlinkage int sys_ipc(uint call, int first, unsigned long second,
-		long third, void __user *ptr, long fifth);
 asmlinkage long ppc64_personality(unsigned long personality);
 asmlinkage int ppc_rtas(struct rtas_args __user *uargs);
 asmlinkage time_t sys64_time(time_t __user * tloc);
-asmlinkage long ppc_newuname(struct new_utsname __user * name);
 
 asmlinkage long sys_rt_sigsuspend(sigset_t __user *unewset,
 		size_t sigsetsize);
diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h
index 07d2d19ab5e9..a5ee345b6a5c 100644
--- a/arch/powerpc/include/asm/systbl.h
+++ b/arch/powerpc/include/asm/systbl.h
@@ -125,7 +125,7 @@ SYSCALL_SPU(fsync)
 SYS32ONLY(sigreturn)
 PPC_SYS(clone)
 COMPAT_SYS_SPU(setdomainname)
-PPC_SYS_SPU(newuname)
+SYSCALL_SPU(newuname)
 SYSCALL(ni_syscall)
 COMPAT_SYS_SPU(adjtimex)
 SYSCALL_SPU(mprotect)
diff --git a/arch/powerpc/include/asm/unistd.h b/arch/powerpc/include/asm/unistd.h
index f6ca76176766..f0a10266e7f7 100644
--- a/arch/powerpc/include/asm/unistd.h
+++ b/arch/powerpc/include/asm/unistd.h
@@ -364,6 +364,7 @@
 #define __ARCH_WANT_STAT64
 #define __ARCH_WANT_SYS_ALARM
 #define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_IPC
 #define __ARCH_WANT_SYS_PAUSE
 #define __ARCH_WANT_SYS_SGETMASK
 #define __ARCH_WANT_SYS_SIGNAL
@@ -376,6 +377,7 @@
 #define __ARCH_WANT_SYS_LLSEEK
 #define __ARCH_WANT_SYS_NICE
 #define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLD_UNAME
 #define __ARCH_WANT_SYS_OLDUMOUNT
 #define __ARCH_WANT_SYS_SIGPENDING
 #define __ARCH_WANT_SYS_SIGPROCMASK
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index c002b0410219..877326320e74 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -98,11 +98,16 @@ obj64-$(CONFIG_AUDIT)		+= compat_audit.o
 
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
 obj-$(CONFIG_FUNCTION_GRAPH_TRACER)	+= ftrace.o
-obj-$(CONFIG_PPC_PERF_CTRS)	+= perf_event.o perf_callchain.o
+obj-$(CONFIG_PERF_EVENTS)	+= perf_callchain.o
+
+obj-$(CONFIG_PPC_PERF_CTRS)	+= perf_event.o
 obj64-$(CONFIG_PPC_PERF_CTRS)	+= power4-pmu.o ppc970-pmu.o power5-pmu.o \
 				   power5+-pmu.o power6-pmu.o power7-pmu.o
 obj32-$(CONFIG_PPC_PERF_CTRS)	+= mpc7450-pmu.o
 
+obj-$(CONFIG_FSL_EMB_PERF_EVENT) += perf_event_fsl_emb.o
+obj-$(CONFIG_FSL_EMB_PERF_EVENT_E500) += e500-pmu.o
+
 obj-$(CONFIG_8XX_MINIMAL_FPEMU) += softemu8xx.o
 
 ifneq ($(CONFIG_PPC_INDIRECT_IO),y)
diff --git a/arch/powerpc/kernel/cacheinfo.c b/arch/powerpc/kernel/cacheinfo.c
index bb37b1d19a58..01fe9ce28379 100644
--- a/arch/powerpc/kernel/cacheinfo.c
+++ b/arch/powerpc/kernel/cacheinfo.c
@@ -642,7 +642,7 @@ static struct kobj_attribute *cache_index_opt_attrs[] = {
 	&cache_assoc_attr,
 };
 
-static struct sysfs_ops cache_index_ops = {
+static const struct sysfs_ops cache_index_ops = {
 	.show = cache_index_show,
 };
 
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 2fc82bac3bbc..8af4949434b2 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -1808,7 +1808,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 64,
 		.dcache_bsize		= 64,
 		.num_pmcs		= 4,
-		.oprofile_cpu_type	= "ppc/e500", /* xxx - galak, e500mc? */
+		.oprofile_cpu_type	= "ppc/e500mc",
 		.oprofile_type		= PPC_OPROFILE_FSL_EMB,
 		.cpu_setup		= __setup_cpu_e500mc,
 		.machine_check		= machine_check_e500,
diff --git a/arch/powerpc/kernel/e500-pmu.c b/arch/powerpc/kernel/e500-pmu.c
new file mode 100644
index 000000000000..7c07de0d8943
--- /dev/null
+++ b/arch/powerpc/kernel/e500-pmu.c
@@ -0,0 +1,129 @@
+/*
+ * Performance counter support for e500 family processors.
+ *
+ * Copyright 2008-2009 Paul Mackerras, IBM Corporation.
+ * Copyright 2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/string.h>
+#include <linux/perf_event.h>
+#include <asm/reg.h>
+#include <asm/cputable.h>
+
+/*
+ * Map of generic hardware event types to hardware events
+ * Zero if unsupported
+ */
+static int e500_generic_events[] = {
+	[PERF_COUNT_HW_CPU_CYCLES] = 1,
+	[PERF_COUNT_HW_INSTRUCTIONS] = 2,
+	[PERF_COUNT_HW_CACHE_MISSES] = 41, /* Data L1 cache reloads */
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 12,
+	[PERF_COUNT_HW_BRANCH_MISSES] = 15,
+};
+
+#define C(x)	PERF_COUNT_HW_CACHE_##x
+
+/*
+ * Table of generalized cache-related events.
+ * 0 means not supported, -1 means nonsensical, other values
+ * are event codes.
+ */
+static int e500_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+	/*
+	 * D-cache misses are not split into read/write/prefetch;
+	 * use raw event 41.
+	 */
+	[C(L1D)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	27,		0	},
+		[C(OP_WRITE)] = {	28,		0	},
+		[C(OP_PREFETCH)] = {	29,		0	},
+	},
+	[C(L1I)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	2,		60	},
+		[C(OP_WRITE)] = {	-1,		-1	},
+		[C(OP_PREFETCH)] = {	0,		0	},
+	},
+	/*
+	 * Assuming LL means L2, it's not a good match for this model.
+	 * It allocates only on L1 castout or explicit prefetch, and
+	 * does not have separate read/write events (but it does have
+	 * separate instruction/data events).
+	 */
+	[C(LL)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	0,		0	},
+		[C(OP_WRITE)] = {	0,		0	},
+		[C(OP_PREFETCH)] = {	0,		0	},
+	},
+	/*
+	 * There are data/instruction MMU misses, but that's a miss on
+	 * the chip's internal level-one TLB which is probably not
+	 * what the user wants.  Instead, unified level-two TLB misses
+	 * are reported here.
+	 */
+	[C(DTLB)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	26,		66	},
+		[C(OP_WRITE)] = {	-1,		-1	},
+		[C(OP_PREFETCH)] = {	-1,		-1	},
+	},
+	[C(BPU)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	12,		15 	},
+		[C(OP_WRITE)] = {	-1,		-1	},
+		[C(OP_PREFETCH)] = {	-1,		-1	},
+	},
+};
+
+static int num_events = 128;
+
+/* Upper half of event id is PMLCb, for threshold events */
+static u64 e500_xlate_event(u64 event_id)
+{
+	u32 event_low = (u32)event_id;
+	u64 ret;
+
+	if (event_low >= num_events)
+		return 0;
+
+	ret = FSL_EMB_EVENT_VALID;
+
+	if (event_low >= 76 && event_low <= 81) {
+		ret |= FSL_EMB_EVENT_RESTRICTED;
+		ret |= event_id &
+		       (FSL_EMB_EVENT_THRESHMUL | FSL_EMB_EVENT_THRESH);
+	} else if (event_id &
+	           (FSL_EMB_EVENT_THRESHMUL | FSL_EMB_EVENT_THRESH)) {
+		/* Threshold requested on non-threshold event */
+		return 0;
+	}
+
+	return ret;
+}
+
+static struct fsl_emb_pmu e500_pmu = {
+	.name			= "e500 family",
+	.n_counter		= 4,
+	.n_restricted		= 2,
+	.xlate_event		= e500_xlate_event,
+	.n_generic		= ARRAY_SIZE(e500_generic_events),
+	.generic_events		= e500_generic_events,
+	.cache_events		= &e500_cache_events,
+};
+
+static int init_e500_pmu(void)
+{
+	if (!cur_cpu_spec->oprofile_cpu_type)
+		return -ENODEV;
+
+	if (!strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc/e500mc"))
+		num_events = 256;
+	else if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc/e500"))
+		return -ENODEV;
+
+	return register_fsl_emb_pmu(&e500_pmu);
+}
+
+arch_initcall(init_e500_pmu);
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 925807488022..bed9a29ee383 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -219,7 +219,8 @@ generic_secondary_common_init:
 	 * physical cpu id in r24, we need to search the pacas to find
 	 * which logical id maps to our physical one.
 	 */
-	LOAD_REG_ADDR(r13, paca)	/* Get base vaddr of paca array	 */
+	LOAD_REG_ADDR(r13, paca)	/* Load paca pointer		 */
+	ld	r13,0(r13)		/* Get base vaddr of paca array	 */
 	li	r5,0			/* logical cpu id                */
 1:	lhz	r6,PACAHWCPUID(r13)	/* Load HW procid from paca      */
 	cmpw	r6,r24			/* Compare to our id             */
@@ -536,7 +537,8 @@ _GLOBAL(pmac_secondary_start)
 	mtmsrd	r3			/* RI on */
 
 	/* Set up a paca value for this processor. */
-	LOAD_REG_ADDR(r4,paca)		/* Get base vaddr of paca array	*/
+	LOAD_REG_ADDR(r4,paca)		/* Load paca pointer		*/
+	ld	r4,0(r4)		/* Get base vaddr of paca array	*/
 	mulli	r13,r24,PACA_SIZE	/* Calculate vaddr of right paca */
 	add	r13,r13,r4		/* for this processor.		*/
 	mtspr	SPRN_SPRG_PACA,r13	/* Save vaddr of paca in an SPRG*/
@@ -615,6 +617,17 @@ _GLOBAL(start_secondary_prolog)
 	std	r3,0(r1)		/* Zero the stack frame pointer	*/
 	bl	.start_secondary
 	b	.
+/*
+ * Reset stack pointer and call start_secondary
+ * to continue with online operation when woken up
+ * from cede in cpu offline.
+ */
+_GLOBAL(start_secondary_resume)
+	ld	r1,PACAKSAVE(r13)	/* Reload kernel stack pointer */
+	li	r3,0
+	std	r3,0(r1)		/* Zero the stack frame pointer	*/
+	bl	.start_secondary
+	b	.
 #endif
 
 /*
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 25793bb0e782..725526547994 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -747,9 +747,6 @@ finish_tlb_load:
 #else
 	rlwimi	r12, r11, 26, 27, 31	/* extract WIMGE from pte */
 #endif
-#ifdef CONFIG_SMP
-	ori	r12, r12, MAS2_M
-#endif
 	mtspr	SPRN_MAS2, r12
 
 #ifdef CONFIG_PTE_64BIT
@@ -887,13 +884,17 @@ KernelSPE:
 	lwz	r3,_MSR(r1)
 	oris	r3,r3,MSR_SPE@h
 	stw	r3,_MSR(r1)	/* enable use of SPE after return */
+#ifdef CONFIG_PRINTK
 	lis	r3,87f@h
 	ori	r3,r3,87f@l
 	mr	r4,r2		/* current */
 	lwz	r5,_NIP(r1)
 	bl	printk
+#endif
 	b	ret_from_except
+#ifdef CONFIG_PRINTK
 87:	.string	"SPE used in kernel  (task=%p, pc=%x)  \n"
+#endif
 	.align	4,0
 
 #endif /* CONFIG_SPE */
diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c
index 5547ae6e6b0b..ec94f906ea43 100644
--- a/arch/powerpc/kernel/iommu.c
+++ b/arch/powerpc/kernel/iommu.c
@@ -42,12 +42,7 @@
 
 #define DBG(...)
 
-#ifdef CONFIG_IOMMU_VMERGE
-static int novmerge = 0;
-#else
-static int novmerge = 1;
-#endif
-
+static int novmerge;
 static int protect4gb = 1;
 
 static void __iommu_free(struct iommu_table *, dma_addr_t, unsigned int);
diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
index 9ddfaef1a184..035ada5443ee 100644
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -469,7 +469,7 @@ static int __init serial_dev_init(void)
 		return -ENODEV;
 
 	/*
-	 * Before we register the platfrom serial devices, we need
+	 * Before we register the platform serial devices, we need
 	 * to fixup their interrupts and their IO ports.
 	 */
 	DBG("Fixing serial ports interrupts and IO ports ...\n");
diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c
index d16b1ea55d44..0c40c6f476fe 100644
--- a/arch/powerpc/kernel/paca.c
+++ b/arch/powerpc/kernel/paca.c
@@ -9,11 +9,15 @@
 
 #include <linux/threads.h>
 #include <linux/module.h>
+#include <linux/lmb.h>
 
+#include <asm/firmware.h>
 #include <asm/lppaca.h>
 #include <asm/paca.h>
 #include <asm/sections.h>
 #include <asm/pgtable.h>
+#include <asm/iseries/lpar_map.h>
+#include <asm/iseries/hv_types.h>
 
 /* This symbol is provided by the linker - let it fill in the paca
  * field correctly */
@@ -70,37 +74,82 @@ struct slb_shadow slb_shadow[] __cacheline_aligned = {
  * processors.  The processor VPD array needs one entry per physical
  * processor (not thread).
  */
-struct paca_struct paca[NR_CPUS];
+struct paca_struct *paca;
 EXPORT_SYMBOL(paca);
 
-void __init initialise_pacas(void)
-{
-	int cpu;
+struct paca_struct boot_paca;
 
-	/* The TOC register (GPR2) points 32kB into the TOC, so that 64kB
-	 * of the TOC can be addressed using a single machine instruction.
-	 */
+void __init initialise_paca(struct paca_struct *new_paca, int cpu)
+{
+       /* The TOC register (GPR2) points 32kB into the TOC, so that 64kB
+	* of the TOC can be addressed using a single machine instruction.
+	*/
 	unsigned long kernel_toc = (unsigned long)(&__toc_start) + 0x8000UL;
 
-	/* Can't use for_each_*_cpu, as they aren't functional yet */
-	for (cpu = 0; cpu < NR_CPUS; cpu++) {
-		struct paca_struct *new_paca = &paca[cpu];
-
 #ifdef CONFIG_PPC_BOOK3S
-		new_paca->lppaca_ptr = &lppaca[cpu];
+	new_paca->lppaca_ptr = &lppaca[cpu];
 #else
-		new_paca->kernel_pgd = swapper_pg_dir;
+	new_paca->kernel_pgd = swapper_pg_dir;
 #endif
-		new_paca->lock_token = 0x8000;
-		new_paca->paca_index = cpu;
-		new_paca->kernel_toc = kernel_toc;
-		new_paca->kernelbase = (unsigned long) _stext;
-		new_paca->kernel_msr = MSR_KERNEL;
-		new_paca->hw_cpu_id = 0xffff;
-		new_paca->__current = &init_task;
+	new_paca->lock_token = 0x8000;
+	new_paca->paca_index = cpu;
+	new_paca->kernel_toc = kernel_toc;
+	new_paca->kernelbase = (unsigned long) _stext;
+	new_paca->kernel_msr = MSR_KERNEL;
+	new_paca->hw_cpu_id = 0xffff;
+	new_paca->__current = &init_task;
 #ifdef CONFIG_PPC_STD_MMU_64
-		new_paca->slb_shadow_ptr = &slb_shadow[cpu];
+	new_paca->slb_shadow_ptr = &slb_shadow[cpu];
 #endif /* CONFIG_PPC_STD_MMU_64 */
+}
+
+static int __initdata paca_size;
+
+void __init allocate_pacas(void)
+{
+	int nr_cpus, cpu, limit;
+
+	/*
+	 * We can't take SLB misses on the paca, and we want to access them
+	 * in real mode, so allocate them within the RMA and also within
+	 * the first segment. On iSeries they must be within the area mapped
+	 * by the HV, which is HvPagesToMap * HVPAGESIZE bytes.
+	 */
+	limit = min(0x10000000ULL, lmb.rmo_size);
+	if (firmware_has_feature(FW_FEATURE_ISERIES))
+		limit = min(limit, HvPagesToMap * HVPAGESIZE);
+
+	nr_cpus = NR_CPUS;
+	/* On iSeries we know we can never have more than 64 cpus */
+	if (firmware_has_feature(FW_FEATURE_ISERIES))
+		nr_cpus = min(64, nr_cpus);
+
+	paca_size = PAGE_ALIGN(sizeof(struct paca_struct) * nr_cpus);
+
+	paca = __va(lmb_alloc_base(paca_size, PAGE_SIZE, limit));
+	memset(paca, 0, paca_size);
+
+	printk(KERN_DEBUG "Allocated %u bytes for %d pacas at %p\n",
+		paca_size, nr_cpus, paca);
+
+	/* Can't use for_each_*_cpu, as they aren't functional yet */
+	for (cpu = 0; cpu < nr_cpus; cpu++)
+		initialise_paca(&paca[cpu], cpu);
+}
+
+void __init free_unused_pacas(void)
+{
+	int new_size;
+
+	new_size = PAGE_ALIGN(sizeof(struct paca_struct) * num_possible_cpus());
+
+	if (new_size >= paca_size)
+		return;
+
+	lmb_free(__pa(paca) + new_size, paca_size - new_size);
+
+	printk(KERN_DEBUG "Freed %u bytes for unused pacas\n",
+		paca_size - new_size);
 
-	}
+	paca_size = new_size;
 }
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 2597f9545d8a..f3c42ce516e7 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -63,21 +63,6 @@ struct dma_map_ops *get_pci_dma_ops(void)
 }
 EXPORT_SYMBOL(get_pci_dma_ops);
 
-int pci_set_dma_mask(struct pci_dev *dev, u64 mask)
-{
-	return dma_set_mask(&dev->dev, mask);
-}
-
-int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
-{
-	int rc;
-
-	rc = dma_set_mask(&dev->dev, mask);
-	dev->dev.coherent_dma_mask = dev->dma_mask;
-
-	return rc;
-}
-
 struct pci_controller *pcibios_alloc_controller(struct device_node *dev)
 {
 	struct pci_controller *phb;
diff --git a/arch/powerpc/kernel/perf_event.c b/arch/powerpc/kernel/perf_event.c
index b6cf8f1f4d35..08460a2e9f41 100644
--- a/arch/powerpc/kernel/perf_event.c
+++ b/arch/powerpc/kernel/perf_event.c
@@ -1164,10 +1164,10 @@ static void record_and_restart(struct perf_event *event, unsigned long val,
 	 * Finally record data if requested.
 	 */
 	if (record) {
-		struct perf_sample_data data = {
-			.addr	= ~0ULL,
-			.period	= event->hw.last_period,
-		};
+		struct perf_sample_data data;
+
+		perf_sample_data_init(&data, ~0ULL);
+		data.period = event->hw.last_period;
 
 		if (event->attr.sample_type & PERF_SAMPLE_ADDR)
 			perf_get_data_addr(regs, &data.addr);
@@ -1287,7 +1287,7 @@ static void perf_event_interrupt(struct pt_regs *regs)
 		irq_exit();
 }
 
-void hw_perf_event_setup(int cpu)
+static void power_pmu_setup(int cpu)
 {
 	struct cpu_hw_events *cpuhw = &per_cpu(cpu_hw_events, cpu);
 
@@ -1297,6 +1297,23 @@ void hw_perf_event_setup(int cpu)
 	cpuhw->mmcr[0] = MMCR0_FC;
 }
 
+static int __cpuinit
+power_pmu_notifier(struct notifier_block *self, unsigned long action, void *hcpu)
+{
+	unsigned int cpu = (long)hcpu;
+
+	switch (action & ~CPU_TASKS_FROZEN) {
+	case CPU_UP_PREPARE:
+		power_pmu_setup(cpu);
+		break;
+
+	default:
+		break;
+	}
+
+	return NOTIFY_OK;
+}
+
 int register_power_pmu(struct power_pmu *pmu)
 {
 	if (ppmu)
@@ -1314,5 +1331,7 @@ int register_power_pmu(struct power_pmu *pmu)
 		freeze_events_kernel = MMCR0_FCHV;
 #endif /* CONFIG_PPC64 */
 
+	perf_cpu_notifier(power_pmu_notifier);
+
 	return 0;
 }
diff --git a/arch/powerpc/kernel/perf_event_fsl_emb.c b/arch/powerpc/kernel/perf_event_fsl_emb.c
new file mode 100644
index 000000000000..369872f6cf78
--- /dev/null
+++ b/arch/powerpc/kernel/perf_event_fsl_emb.c
@@ -0,0 +1,654 @@
+/*
+ * Performance event support - Freescale Embedded Performance Monitor
+ *
+ * Copyright 2008-2009 Paul Mackerras, IBM Corporation.
+ * Copyright 2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/perf_event.h>
+#include <linux/percpu.h>
+#include <linux/hardirq.h>
+#include <asm/reg_fsl_emb.h>
+#include <asm/pmc.h>
+#include <asm/machdep.h>
+#include <asm/firmware.h>
+#include <asm/ptrace.h>
+
+struct cpu_hw_events {
+	int n_events;
+	int disabled;
+	u8  pmcs_enabled;
+	struct perf_event *event[MAX_HWEVENTS];
+};
+static DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events);
+
+static struct fsl_emb_pmu *ppmu;
+
+/* Number of perf_events counting hardware events */
+static atomic_t num_events;
+/* Used to avoid races in calling reserve/release_pmc_hardware */
+static DEFINE_MUTEX(pmc_reserve_mutex);
+
+/*
+ * If interrupts were soft-disabled when a PMU interrupt occurs, treat
+ * it as an NMI.
+ */
+static inline int perf_intr_is_nmi(struct pt_regs *regs)
+{
+#ifdef __powerpc64__
+	return !regs->softe;
+#else
+	return 0;
+#endif
+}
+
+static void perf_event_interrupt(struct pt_regs *regs);
+
+/*
+ * Read one performance monitor counter (PMC).
+ */
+static unsigned long read_pmc(int idx)
+{
+	unsigned long val;
+
+	switch (idx) {
+	case 0:
+		val = mfpmr(PMRN_PMC0);
+		break;
+	case 1:
+		val = mfpmr(PMRN_PMC1);
+		break;
+	case 2:
+		val = mfpmr(PMRN_PMC2);
+		break;
+	case 3:
+		val = mfpmr(PMRN_PMC3);
+		break;
+	default:
+		printk(KERN_ERR "oops trying to read PMC%d\n", idx);
+		val = 0;
+	}
+	return val;
+}
+
+/*
+ * Write one PMC.
+ */
+static void write_pmc(int idx, unsigned long val)
+{
+	switch (idx) {
+	case 0:
+		mtpmr(PMRN_PMC0, val);
+		break;
+	case 1:
+		mtpmr(PMRN_PMC1, val);
+		break;
+	case 2:
+		mtpmr(PMRN_PMC2, val);
+		break;
+	case 3:
+		mtpmr(PMRN_PMC3, val);
+		break;
+	default:
+		printk(KERN_ERR "oops trying to write PMC%d\n", idx);
+	}
+
+	isync();
+}
+
+/*
+ * Write one local control A register
+ */
+static void write_pmlca(int idx, unsigned long val)
+{
+	switch (idx) {
+	case 0:
+		mtpmr(PMRN_PMLCA0, val);
+		break;
+	case 1:
+		mtpmr(PMRN_PMLCA1, val);
+		break;
+	case 2:
+		mtpmr(PMRN_PMLCA2, val);
+		break;
+	case 3:
+		mtpmr(PMRN_PMLCA3, val);
+		break;
+	default:
+		printk(KERN_ERR "oops trying to write PMLCA%d\n", idx);
+	}
+
+	isync();
+}
+
+/*
+ * Write one local control B register
+ */
+static void write_pmlcb(int idx, unsigned long val)
+{
+	switch (idx) {
+	case 0:
+		mtpmr(PMRN_PMLCB0, val);
+		break;
+	case 1:
+		mtpmr(PMRN_PMLCB1, val);
+		break;
+	case 2:
+		mtpmr(PMRN_PMLCB2, val);
+		break;
+	case 3:
+		mtpmr(PMRN_PMLCB3, val);
+		break;
+	default:
+		printk(KERN_ERR "oops trying to write PMLCB%d\n", idx);
+	}
+
+	isync();
+}
+
+static void fsl_emb_pmu_read(struct perf_event *event)
+{
+	s64 val, delta, prev;
+
+	/*
+	 * Performance monitor interrupts come even when interrupts
+	 * are soft-disabled, as long as interrupts are hard-enabled.
+	 * Therefore we treat them like NMIs.
+	 */
+	do {
+		prev = atomic64_read(&event->hw.prev_count);
+		barrier();
+		val = read_pmc(event->hw.idx);
+	} while (atomic64_cmpxchg(&event->hw.prev_count, prev, val) != prev);
+
+	/* The counters are only 32 bits wide */
+	delta = (val - prev) & 0xfffffffful;
+	atomic64_add(delta, &event->count);
+	atomic64_sub(delta, &event->hw.period_left);
+}
+
+/*
+ * Disable all events to prevent PMU interrupts and to allow
+ * events to be added or removed.
+ */
+void hw_perf_disable(void)
+{
+	struct cpu_hw_events *cpuhw;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	cpuhw = &__get_cpu_var(cpu_hw_events);
+
+	if (!cpuhw->disabled) {
+		cpuhw->disabled = 1;
+
+		/*
+		 * Check if we ever enabled the PMU on this cpu.
+		 */
+		if (!cpuhw->pmcs_enabled) {
+			ppc_enable_pmcs();
+			cpuhw->pmcs_enabled = 1;
+		}
+
+		if (atomic_read(&num_events)) {
+			/*
+			 * Set the 'freeze all counters' bit, and disable
+			 * interrupts.  The barrier is to make sure the
+			 * mtpmr has been executed and the PMU has frozen
+			 * the events before we return.
+			 */
+
+			mtpmr(PMRN_PMGC0, PMGC0_FAC);
+			isync();
+		}
+	}
+	local_irq_restore(flags);
+}
+
+/*
+ * Re-enable all events if disable == 0.
+ * If we were previously disabled and events were added, then
+ * put the new config on the PMU.
+ */
+void hw_perf_enable(void)
+{
+	struct cpu_hw_events *cpuhw;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	cpuhw = &__get_cpu_var(cpu_hw_events);
+	if (!cpuhw->disabled)
+		goto out;
+
+	cpuhw->disabled = 0;
+	ppc_set_pmu_inuse(cpuhw->n_events != 0);
+
+	if (cpuhw->n_events > 0) {
+		mtpmr(PMRN_PMGC0, PMGC0_PMIE | PMGC0_FCECE);
+		isync();
+	}
+
+ out:
+	local_irq_restore(flags);
+}
+
+static int collect_events(struct perf_event *group, int max_count,
+			  struct perf_event *ctrs[])
+{
+	int n = 0;
+	struct perf_event *event;
+
+	if (!is_software_event(group)) {
+		if (n >= max_count)
+			return -1;
+		ctrs[n] = group;
+		n++;
+	}
+	list_for_each_entry(event, &group->sibling_list, group_entry) {
+		if (!is_software_event(event) &&
+		    event->state != PERF_EVENT_STATE_OFF) {
+			if (n >= max_count)
+				return -1;
+			ctrs[n] = event;
+			n++;
+		}
+	}
+	return n;
+}
+
+/* perf must be disabled, context locked on entry */
+static int fsl_emb_pmu_enable(struct perf_event *event)
+{
+	struct cpu_hw_events *cpuhw;
+	int ret = -EAGAIN;
+	int num_counters = ppmu->n_counter;
+	u64 val;
+	int i;
+
+	cpuhw = &get_cpu_var(cpu_hw_events);
+
+	if (event->hw.config & FSL_EMB_EVENT_RESTRICTED)
+		num_counters = ppmu->n_restricted;
+
+	/*
+	 * Allocate counters from top-down, so that restricted-capable
+	 * counters are kept free as long as possible.
+	 */
+	for (i = num_counters - 1; i >= 0; i--) {
+		if (cpuhw->event[i])
+			continue;
+
+		break;
+	}
+
+	if (i < 0)
+		goto out;
+
+	event->hw.idx = i;
+	cpuhw->event[i] = event;
+	++cpuhw->n_events;
+
+	val = 0;
+	if (event->hw.sample_period) {
+		s64 left = atomic64_read(&event->hw.period_left);
+		if (left < 0x80000000L)
+			val = 0x80000000L - left;
+	}
+	atomic64_set(&event->hw.prev_count, val);
+	write_pmc(i, val);
+	perf_event_update_userpage(event);
+
+	write_pmlcb(i, event->hw.config >> 32);
+	write_pmlca(i, event->hw.config_base);
+
+	ret = 0;
+ out:
+	put_cpu_var(cpu_hw_events);
+	return ret;
+}
+
+/* perf must be disabled, context locked on entry */
+static void fsl_emb_pmu_disable(struct perf_event *event)
+{
+	struct cpu_hw_events *cpuhw;
+	int i = event->hw.idx;
+
+	if (i < 0)
+		goto out;
+
+	fsl_emb_pmu_read(event);
+
+	cpuhw = &get_cpu_var(cpu_hw_events);
+
+	WARN_ON(event != cpuhw->event[event->hw.idx]);
+
+	write_pmlca(i, 0);
+	write_pmlcb(i, 0);
+	write_pmc(i, 0);
+
+	cpuhw->event[i] = NULL;
+	event->hw.idx = -1;
+
+	/*
+	 * TODO: if at least one restricted event exists, and we
+	 * just freed up a non-restricted-capable counter, and
+	 * there is a restricted-capable counter occupied by
+	 * a non-restricted event, migrate that event to the
+	 * vacated counter.
+	 */
+
+	cpuhw->n_events--;
+
+ out:
+	put_cpu_var(cpu_hw_events);
+}
+
+/*
+ * Re-enable interrupts on a event after they were throttled
+ * because they were coming too fast.
+ *
+ * Context is locked on entry, but perf is not disabled.
+ */
+static void fsl_emb_pmu_unthrottle(struct perf_event *event)
+{
+	s64 val, left;
+	unsigned long flags;
+
+	if (event->hw.idx < 0 || !event->hw.sample_period)
+		return;
+	local_irq_save(flags);
+	perf_disable();
+	fsl_emb_pmu_read(event);
+	left = event->hw.sample_period;
+	event->hw.last_period = left;
+	val = 0;
+	if (left < 0x80000000L)
+		val = 0x80000000L - left;
+	write_pmc(event->hw.idx, val);
+	atomic64_set(&event->hw.prev_count, val);
+	atomic64_set(&event->hw.period_left, left);
+	perf_event_update_userpage(event);
+	perf_enable();
+	local_irq_restore(flags);
+}
+
+static struct pmu fsl_emb_pmu = {
+	.enable		= fsl_emb_pmu_enable,
+	.disable	= fsl_emb_pmu_disable,
+	.read		= fsl_emb_pmu_read,
+	.unthrottle	= fsl_emb_pmu_unthrottle,
+};
+
+/*
+ * Release the PMU if this is the last perf_event.
+ */
+static void hw_perf_event_destroy(struct perf_event *event)
+{
+	if (!atomic_add_unless(&num_events, -1, 1)) {
+		mutex_lock(&pmc_reserve_mutex);
+		if (atomic_dec_return(&num_events) == 0)
+			release_pmc_hardware();
+		mutex_unlock(&pmc_reserve_mutex);
+	}
+}
+
+/*
+ * Translate a generic cache event_id config to a raw event_id code.
+ */
+static int hw_perf_cache_event(u64 config, u64 *eventp)
+{
+	unsigned long type, op, result;
+	int ev;
+
+	if (!ppmu->cache_events)
+		return -EINVAL;
+
+	/* unpack config */
+	type = config & 0xff;
+	op = (config >> 8) & 0xff;
+	result = (config >> 16) & 0xff;
+
+	if (type >= PERF_COUNT_HW_CACHE_MAX ||
+	    op >= PERF_COUNT_HW_CACHE_OP_MAX ||
+	    result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
+		return -EINVAL;
+
+	ev = (*ppmu->cache_events)[type][op][result];
+	if (ev == 0)
+		return -EOPNOTSUPP;
+	if (ev == -1)
+		return -EINVAL;
+	*eventp = ev;
+	return 0;
+}
+
+const struct pmu *hw_perf_event_init(struct perf_event *event)
+{
+	u64 ev;
+	struct perf_event *events[MAX_HWEVENTS];
+	int n;
+	int err;
+	int num_restricted;
+	int i;
+
+	switch (event->attr.type) {
+	case PERF_TYPE_HARDWARE:
+		ev = event->attr.config;
+		if (ev >= ppmu->n_generic || ppmu->generic_events[ev] == 0)
+			return ERR_PTR(-EOPNOTSUPP);
+		ev = ppmu->generic_events[ev];
+		break;
+
+	case PERF_TYPE_HW_CACHE:
+		err = hw_perf_cache_event(event->attr.config, &ev);
+		if (err)
+			return ERR_PTR(err);
+		break;
+
+	case PERF_TYPE_RAW:
+		ev = event->attr.config;
+		break;
+
+	default:
+		return ERR_PTR(-EINVAL);
+	}
+
+	event->hw.config = ppmu->xlate_event(ev);
+	if (!(event->hw.config & FSL_EMB_EVENT_VALID))
+		return ERR_PTR(-EINVAL);
+
+	/*
+	 * If this is in a group, check if it can go on with all the
+	 * other hardware events in the group.  We assume the event
+	 * hasn't been linked into its leader's sibling list at this point.
+	 */
+	n = 0;
+	if (event->group_leader != event) {
+		n = collect_events(event->group_leader,
+		                   ppmu->n_counter - 1, events);
+		if (n < 0)
+			return ERR_PTR(-EINVAL);
+	}
+
+	if (event->hw.config & FSL_EMB_EVENT_RESTRICTED) {
+		num_restricted = 0;
+		for (i = 0; i < n; i++) {
+			if (events[i]->hw.config & FSL_EMB_EVENT_RESTRICTED)
+				num_restricted++;
+		}
+
+		if (num_restricted >= ppmu->n_restricted)
+			return ERR_PTR(-EINVAL);
+	}
+
+	event->hw.idx = -1;
+
+	event->hw.config_base = PMLCA_CE | PMLCA_FCM1 |
+	                        (u32)((ev << 16) & PMLCA_EVENT_MASK);
+
+	if (event->attr.exclude_user)
+		event->hw.config_base |= PMLCA_FCU;
+	if (event->attr.exclude_kernel)
+		event->hw.config_base |= PMLCA_FCS;
+	if (event->attr.exclude_idle)
+		return ERR_PTR(-ENOTSUPP);
+
+	event->hw.last_period = event->hw.sample_period;
+	atomic64_set(&event->hw.period_left, event->hw.last_period);
+
+	/*
+	 * See if we need to reserve the PMU.
+	 * If no events are currently in use, then we have to take a
+	 * mutex to ensure that we don't race with another task doing
+	 * reserve_pmc_hardware or release_pmc_hardware.
+	 */
+	err = 0;
+	if (!atomic_inc_not_zero(&num_events)) {
+		mutex_lock(&pmc_reserve_mutex);
+		if (atomic_read(&num_events) == 0 &&
+		    reserve_pmc_hardware(perf_event_interrupt))
+			err = -EBUSY;
+		else
+			atomic_inc(&num_events);
+		mutex_unlock(&pmc_reserve_mutex);
+
+		mtpmr(PMRN_PMGC0, PMGC0_FAC);
+		isync();
+	}
+	event->destroy = hw_perf_event_destroy;
+
+	if (err)
+		return ERR_PTR(err);
+	return &fsl_emb_pmu;
+}
+
+/*
+ * A counter has overflowed; update its count and record
+ * things if requested.  Note that interrupts are hard-disabled
+ * here so there is no possibility of being interrupted.
+ */
+static void record_and_restart(struct perf_event *event, unsigned long val,
+			       struct pt_regs *regs, int nmi)
+{
+	u64 period = event->hw.sample_period;
+	s64 prev, delta, left;
+	int record = 0;
+
+	/* we don't have to worry about interrupts here */
+	prev = atomic64_read(&event->hw.prev_count);
+	delta = (val - prev) & 0xfffffffful;
+	atomic64_add(delta, &event->count);
+
+	/*
+	 * See if the total period for this event has expired,
+	 * and update for the next period.
+	 */
+	val = 0;
+	left = atomic64_read(&event->hw.period_left) - delta;
+	if (period) {
+		if (left <= 0) {
+			left += period;
+			if (left <= 0)
+				left = period;
+			record = 1;
+		}
+		if (left < 0x80000000LL)
+			val = 0x80000000LL - left;
+	}
+
+	/*
+	 * Finally record data if requested.
+	 */
+	if (record) {
+		struct perf_sample_data data = {
+			.period	= event->hw.last_period,
+		};
+
+		if (perf_event_overflow(event, nmi, &data, regs)) {
+			/*
+			 * Interrupts are coming too fast - throttle them
+			 * by setting the event to 0, so it will be
+			 * at least 2^30 cycles until the next interrupt
+			 * (assuming each event counts at most 2 counts
+			 * per cycle).
+			 */
+			val = 0;
+			left = ~0ULL >> 1;
+		}
+	}
+
+	write_pmc(event->hw.idx, val);
+	atomic64_set(&event->hw.prev_count, val);
+	atomic64_set(&event->hw.period_left, left);
+	perf_event_update_userpage(event);
+}
+
+static void perf_event_interrupt(struct pt_regs *regs)
+{
+	int i;
+	struct cpu_hw_events *cpuhw = &__get_cpu_var(cpu_hw_events);
+	struct perf_event *event;
+	unsigned long val;
+	int found = 0;
+	int nmi;
+
+	nmi = perf_intr_is_nmi(regs);
+	if (nmi)
+		nmi_enter();
+	else
+		irq_enter();
+
+	for (i = 0; i < ppmu->n_counter; ++i) {
+		event = cpuhw->event[i];
+
+		val = read_pmc(i);
+		if ((int)val < 0) {
+			if (event) {
+				/* event has overflowed */
+				found = 1;
+				record_and_restart(event, val, regs, nmi);
+			} else {
+				/*
+				 * Disabled counter is negative,
+				 * reset it just in case.
+				 */
+				write_pmc(i, 0);
+			}
+		}
+	}
+
+	/* PMM will keep counters frozen until we return from the interrupt. */
+	mtmsr(mfmsr() | MSR_PMM);
+	mtpmr(PMRN_PMGC0, PMGC0_PMIE | PMGC0_FCECE);
+	isync();
+
+	if (nmi)
+		nmi_exit();
+	else
+		irq_exit();
+}
+
+void hw_perf_event_setup(int cpu)
+{
+	struct cpu_hw_events *cpuhw = &per_cpu(cpu_hw_events, cpu);
+
+	memset(cpuhw, 0, sizeof(*cpuhw));
+}
+
+int register_fsl_emb_pmu(struct fsl_emb_pmu *pmu)
+{
+	if (ppmu)
+		return -EBUSY;		/* something's already registered */
+
+	ppmu = pmu;
+	pr_info("%s performance monitor hardware support registered\n",
+		pmu->name);
+
+	return 0;
+}
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 43238b2054b6..05131d634e73 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -43,6 +43,7 @@
 #include <asm/smp.h>
 #include <asm/system.h>
 #include <asm/mmu.h>
+#include <asm/paca.h>
 #include <asm/pgtable.h>
 #include <asm/pci.h>
 #include <asm/iommu.h>
@@ -721,6 +722,8 @@ void __init early_init_devtree(void *params)
 	 * FIXME .. and the initrd too? */
 	move_device_tree();
 
+	allocate_pacas();
+
 	DBG("Scanning CPUs ...\n");
 
 	/* Retreive CPU related informations from the flat tree
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index d9b05866615f..ed2cfe17d25e 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -940,7 +940,7 @@ static int del_instruction_bp(struct task_struct *child, int slot)
 {
 	switch (slot) {
 	case 1:
-		if (child->thread.iac1 == 0)
+		if ((child->thread.dbcr0 & DBCR0_IAC1) == 0)
 			return -ENOENT;
 
 		if (dbcr_iac_range(child) & DBCR_IAC12MODE) {
@@ -952,7 +952,7 @@ static int del_instruction_bp(struct task_struct *child, int slot)
 		child->thread.dbcr0 &= ~DBCR0_IAC1;
 		break;
 	case 2:
-		if (child->thread.iac2 == 0)
+		if ((child->thread.dbcr0 & DBCR0_IAC2) == 0)
 			return -ENOENT;
 
 		if (dbcr_iac_range(child) & DBCR_IAC12MODE)
@@ -963,7 +963,7 @@ static int del_instruction_bp(struct task_struct *child, int slot)
 		break;
 #if CONFIG_PPC_ADV_DEBUG_IACS > 2
 	case 3:
-		if (child->thread.iac3 == 0)
+		if ((child->thread.dbcr0 & DBCR0_IAC3) == 0)
 			return -ENOENT;
 
 		if (dbcr_iac_range(child) & DBCR_IAC34MODE) {
@@ -975,7 +975,7 @@ static int del_instruction_bp(struct task_struct *child, int slot)
 		child->thread.dbcr0 &= ~DBCR0_IAC3;
 		break;
 	case 4:
-		if (child->thread.iac4 == 0)
+		if ((child->thread.dbcr0 & DBCR0_IAC4) == 0)
 			return -ENOENT;
 
 		if (dbcr_iac_range(child) & DBCR_IAC34MODE)
@@ -1054,7 +1054,7 @@ static int set_dac(struct task_struct *child, struct ppc_hw_breakpoint *bp_info)
 static int del_dac(struct task_struct *child, int slot)
 {
 	if (slot == 1) {
-		if (child->thread.dac1 == 0)
+		if ((dbcr_dac(child) & (DBCR_DAC1R | DBCR_DAC1W)) == 0)
 			return -ENOENT;
 
 		child->thread.dac1 = 0;
@@ -1070,7 +1070,7 @@ static int del_dac(struct task_struct *child, int slot)
 		child->thread.dvc1 = 0;
 #endif
 	} else if (slot == 2) {
-		if (child->thread.dac1 == 0)
+		if ((dbcr_dac(child) & (DBCR_DAC2R | DBCR_DAC2W)) == 0)
 			return -ENOENT;
 
 #ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 03dd6a248198..48f0a008b20b 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -36,6 +36,7 @@
 #include <linux/lmb.h>
 #include <linux/of_platform.h>
 #include <asm/io.h>
+#include <asm/paca.h>
 #include <asm/prom.h>
 #include <asm/processor.h>
 #include <asm/vdso_datapage.h>
@@ -493,6 +494,8 @@ void __init smp_setup_cpu_maps(void)
 	 * here will have to be reworked
 	 */
 	cpu_init_thread_core_maps(nthreads);
+
+	free_unused_pacas();
 }
 #endif /* CONFIG_SMP */
 
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index b152de3e64d4..8f58986c2ad9 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -39,7 +39,6 @@
 #include <asm/serial.h>
 #include <asm/udbg.h>
 #include <asm/mmu_context.h>
-#include <asm/swiotlb.h>
 
 #include "setup.h"
 
@@ -343,11 +342,6 @@ void __init setup_arch(char **cmdline_p)
 		ppc_md.setup_arch();
 	if ( ppc_md.progress ) ppc_md.progress("arch: exit", 0x3eab);
 
-#ifdef CONFIG_SWIOTLB
-	if (ppc_swiotlb_enable)
-		swiotlb_init(1);
-#endif
-
 	paging_init();
 
 	/* Initialize the MMU context management stuff */
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 6568406b2a30..914389158a9b 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -61,7 +61,6 @@
 #include <asm/xmon.h>
 #include <asm/udbg.h>
 #include <asm/kexec.h>
-#include <asm/swiotlb.h>
 #include <asm/mmu_context.h>
 
 #include "setup.h"
@@ -144,9 +143,9 @@ early_param("smt-enabled", early_smt_enabled);
 #endif /* CONFIG_SMP */
 
 /* Put the paca pointer into r13 and SPRG_PACA */
-void __init setup_paca(int cpu)
+static void __init setup_paca(struct paca_struct *new_paca)
 {
-	local_paca = &paca[cpu];
+	local_paca = new_paca;
 	mtspr(SPRN_SPRG_PACA, local_paca);
 #ifdef CONFIG_PPC_BOOK3E
 	mtspr(SPRN_SPRG_TLB_EXFRAME, local_paca->extlb);
@@ -176,14 +175,12 @@ void __init early_setup(unsigned long dt_ptr)
 {
 	/* -------- printk is _NOT_ safe to use here ! ------- */
 
-	/* Fill in any unititialised pacas */
-	initialise_pacas();
-
 	/* Identify CPU type */
 	identify_cpu(0, mfspr(SPRN_PVR));
 
 	/* Assume we're on cpu 0 for now. Don't write to the paca yet! */
-	setup_paca(0);
+	initialise_paca(&boot_paca, 0);
+	setup_paca(&boot_paca);
 
 	/* Initialize lockdep early or else spinlocks will blow */
 	lockdep_init();
@@ -203,7 +200,7 @@ void __init early_setup(unsigned long dt_ptr)
 	early_init_devtree(__va(dt_ptr));
 
 	/* Now we know the logical id of our boot cpu, setup the paca. */
-	setup_paca(boot_cpuid);
+	setup_paca(&paca[boot_cpuid]);
 
 	/* Fix up paca fields required for the boot cpu */
 	get_paca()->cpu_start = 1;
@@ -543,11 +540,6 @@ void __init setup_arch(char **cmdline_p)
 	if (ppc_md.setup_arch)
 		ppc_md.setup_arch();
 
-#ifdef CONFIG_SWIOTLB
-	if (ppc_swiotlb_enable)
-		swiotlb_init(1);
-#endif
-
 	paging_init();
 
 	/* Initialize the MMU context management stuff */
diff --git a/arch/powerpc/kernel/syscalls.c b/arch/powerpc/kernel/syscalls.c
index 3370e62e43d4..f2496f2faecc 100644
--- a/arch/powerpc/kernel/syscalls.c
+++ b/arch/powerpc/kernel/syscalls.c
@@ -42,100 +42,6 @@
 #include <asm/time.h>
 #include <asm/unistd.h>
 
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly.
- */
-int sys_ipc(uint call, int first, unsigned long second, long third,
-	    void __user *ptr, long fifth)
-{
-	int version, ret;
-
-	version = call >> 16; /* hack for backward compatibility */
-	call &= 0xffff;
-
-	ret = -ENOSYS;
-	switch (call) {
-	case SEMOP:
-		ret = sys_semtimedop(first, (struct sembuf __user *)ptr,
-				      (unsigned)second, NULL);
-		break;
-	case SEMTIMEDOP:
-		ret = sys_semtimedop(first, (struct sembuf __user *)ptr,
-				      (unsigned)second,
-				      (const struct timespec __user *) fifth);
-		break;
-	case SEMGET:
-		ret = sys_semget (first, (int)second, third);
-		break;
-	case SEMCTL: {
-		union semun fourth;
-
-		ret = -EINVAL;
-		if (!ptr)
-			break;
-		if ((ret = get_user(fourth.__pad, (void __user * __user *)ptr)))
-			break;
-		ret = sys_semctl(first, (int)second, third, fourth);
-		break;
-	}
-	case MSGSND:
-		ret = sys_msgsnd(first, (struct msgbuf __user *)ptr,
-				 (size_t)second, third);
-		break;
-	case MSGRCV:
-		switch (version) {
-		case 0: {
-			struct ipc_kludge tmp;
-
-			ret = -EINVAL;
-			if (!ptr)
-				break;
-			if ((ret = copy_from_user(&tmp,
-						(struct ipc_kludge __user *) ptr,
-						sizeof (tmp)) ? -EFAULT : 0))
-				break;
-			ret = sys_msgrcv(first, tmp.msgp, (size_t) second,
-					  tmp.msgtyp, third);
-			break;
-		}
-		default:
-			ret = sys_msgrcv (first, (struct msgbuf __user *) ptr,
-					  (size_t)second, fifth, third);
-			break;
-		}
-		break;
-	case MSGGET:
-		ret = sys_msgget((key_t)first, (int)second);
-		break;
-	case MSGCTL:
-		ret = sys_msgctl(first, (int)second,
-				  (struct msqid_ds __user *)ptr);
-		break;
-	case SHMAT: {
-		ulong raddr;
-		ret = do_shmat(first, (char __user *)ptr, (int)second, &raddr);
-		if (ret)
-			break;
-		ret = put_user(raddr, (ulong __user *) third);
-		break;
-	}
-	case SHMDT:
-		ret = sys_shmdt((char __user *)ptr);
-		break;
-	case SHMGET:
-		ret = sys_shmget(first, (size_t)second, third);
-		break;
-	case SHMCTL:
-		ret = sys_shmctl(first, (int)second,
-				 (struct shmid_ds __user *)ptr);
-		break;
-	}
-
-	return ret;
-}
-
 static inline unsigned long do_mmap2(unsigned long addr, size_t len,
 			unsigned long prot, unsigned long flags,
 			unsigned long fd, unsigned long off, int shift)
@@ -210,76 +116,6 @@ long ppc64_personality(unsigned long personality)
 }
 #endif
 
-#ifdef CONFIG_PPC64
-#define OVERRIDE_MACHINE    (personality(current->personality) == PER_LINUX32)
-#else
-#define OVERRIDE_MACHINE    0
-#endif
-
-static inline int override_machine(char __user *mach)
-{
-	if (OVERRIDE_MACHINE) {
-		/* change ppc64 to ppc */
-		if (__put_user(0, mach+3) || __put_user(0, mach+4))
-			return -EFAULT;
-	}
-	return 0;
-}
-
-long ppc_newuname(struct new_utsname __user * name)
-{
-	int err = 0;
-
-	down_read(&uts_sem);
-	if (copy_to_user(name, utsname(), sizeof(*name)))
-		err = -EFAULT;
-	up_read(&uts_sem);
-	if (!err)
-		err = override_machine(name->machine);
-	return err;
-}
-
-int sys_uname(struct old_utsname __user *name)
-{
-	int err = 0;
-	
-	down_read(&uts_sem);
-	if (copy_to_user(name, utsname(), sizeof(*name)))
-		err = -EFAULT;
-	up_read(&uts_sem);
-	if (!err)
-		err = override_machine(name->machine);
-	return err;
-}
-
-int sys_olduname(struct oldold_utsname __user *name)
-{
-	int error;
-
-	if (!access_ok(VERIFY_WRITE, name, sizeof(struct oldold_utsname)))
-		return -EFAULT;
-  
-	down_read(&uts_sem);
-	error = __copy_to_user(&name->sysname, &utsname()->sysname,
-			       __OLD_UTS_LEN);
-	error |= __put_user(0, name->sysname + __OLD_UTS_LEN);
-	error |= __copy_to_user(&name->nodename, &utsname()->nodename,
-				__OLD_UTS_LEN);
-	error |= __put_user(0, name->nodename + __OLD_UTS_LEN);
-	error |= __copy_to_user(&name->release, &utsname()->release,
-				__OLD_UTS_LEN);
-	error |= __put_user(0, name->release + __OLD_UTS_LEN);
-	error |= __copy_to_user(&name->version, &utsname()->version,
-				__OLD_UTS_LEN);
-	error |= __put_user(0, name->version + __OLD_UTS_LEN);
-	error |= __copy_to_user(&name->machine, &utsname()->machine,
-				__OLD_UTS_LEN);
-	error |= override_machine(name->machine);
-	up_read(&uts_sem);
-
-	return error? -EFAULT: 0;
-}
-
 long ppc_fadvise64_64(int fd, int advice, u32 offset_high, u32 offset_low,
 		      u32 len_high, u32 len_low)
 {
diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c
index 4ec900af332f..b1dbd9ee87cc 100644
--- a/arch/powerpc/mm/init_32.c
+++ b/arch/powerpc/mm/init_32.c
@@ -47,7 +47,7 @@
 #include "mmu_decl.h"
 
 #if defined(CONFIG_KERNEL_START_BOOL) || defined(CONFIG_LOWMEM_SIZE_BOOL)
-/* The ammount of lowmem must be within 0xF0000000 - KERNELBASE. */
+/* The amount of lowmem must be within 0xF0000000 - KERNELBASE. */
 #if (CONFIG_LOWMEM_SIZE > (0xF0000000 - PAGE_OFFSET))
 #error "You must adjust CONFIG_LOWMEM_SIZE or CONFIG_START_KERNEL"
 #endif
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index 311224cdb7ad..448f972b22f5 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -48,6 +48,7 @@
 #include <asm/sparsemem.h>
 #include <asm/vdso.h>
 #include <asm/fixmap.h>
+#include <asm/swiotlb.h>
 
 #include "mmu_decl.h"
 
@@ -320,6 +321,11 @@ void __init mem_init(void)
 	struct page *page;
 	unsigned long reservedpages = 0, codesize, initsize, datasize, bsssize;
 
+#ifdef CONFIG_SWIOTLB
+	if (ppc_swiotlb_enable)
+		swiotlb_init(1);
+#endif
+
 	num_physpages = lmb.memory.size >> PAGE_SHIFT;
 	high_memory = (void *) __va(max_low_pfn * PAGE_SIZE);
 
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
index 6f8ebe1085b3..5d7cc88dae6b 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
@@ -553,7 +553,7 @@ static ssize_t mpc52xx_wdt_write(struct file *file, const char __user *data,
 	return 0;
 }
 
-static struct watchdog_info mpc5200_wdt_info = {
+static const struct watchdog_info mpc5200_wdt_info = {
 	.options	= WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
 	.identity	= WDT_IDENTITY,
 };
@@ -711,7 +711,11 @@ static int __devinit mpc52xx_gpt_wdt_init(void)
 	return 0;
 }
 
-#define mpc52xx_gpt_wdt_setup(x, y)		(0)
+static inline int mpc52xx_gpt_wdt_setup(struct mpc52xx_gpt_priv *gpt,
+					const u32 *period)
+{
+	return 0;
+}
 
 #endif	/*  CONFIG_MPC5200_WDT	*/
 
diff --git a/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
index 9d962d7c72c1..d4a09f8705b5 100644
--- a/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
+++ b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
@@ -24,7 +24,7 @@
 
 #include "pq2.h"
 
-static DEFINE_SPINLOCK(pci_pic_lock);
+static DEFINE_RAW_SPINLOCK(pci_pic_lock);
 
 struct pq2ads_pci_pic {
 	struct device_node *node;
@@ -45,12 +45,12 @@ static void pq2ads_pci_mask_irq(unsigned int virq)
 
 	if (irq != -1) {
 		unsigned long flags;
-		spin_lock_irqsave(&pci_pic_lock, flags);
+		raw_spin_lock_irqsave(&pci_pic_lock, flags);
 
 		setbits32(&priv->regs->mask, 1 << irq);
 		mb();
 
-		spin_unlock_irqrestore(&pci_pic_lock, flags);
+		raw_spin_unlock_irqrestore(&pci_pic_lock, flags);
 	}
 }
 
@@ -62,9 +62,9 @@ static void pq2ads_pci_unmask_irq(unsigned int virq)
 	if (irq != -1) {
 		unsigned long flags;
 
-		spin_lock_irqsave(&pci_pic_lock, flags);
+		raw_spin_lock_irqsave(&pci_pic_lock, flags);
 		clrbits32(&priv->regs->mask, 1 << irq);
-		spin_unlock_irqrestore(&pci_pic_lock, flags);
+		raw_spin_unlock_irqrestore(&pci_pic_lock, flags);
 	}
 }
 
diff --git a/arch/powerpc/platforms/85xx/socrates_fpga_pic.c b/arch/powerpc/platforms/85xx/socrates_fpga_pic.c
index 42e87f08aa01..d48527ffc425 100644
--- a/arch/powerpc/platforms/85xx/socrates_fpga_pic.c
+++ b/arch/powerpc/platforms/85xx/socrates_fpga_pic.c
@@ -50,7 +50,7 @@ static struct socrates_fpga_irq_info fpga_irqs[SOCRATES_FPGA_NUM_IRQS] = {
 
 #define socrates_fpga_irq_to_hw(virq)    ((unsigned int)irq_map[virq].hwirq)
 
-static DEFINE_SPINLOCK(socrates_fpga_pic_lock);
+static DEFINE_RAW_SPINLOCK(socrates_fpga_pic_lock);
 
 static void __iomem *socrates_fpga_pic_iobase;
 static struct irq_host *socrates_fpga_pic_irq_host;
@@ -80,9 +80,9 @@ static inline unsigned int socrates_fpga_pic_get_irq(unsigned int irq)
 	if (i == 3)
 		return NO_IRQ;
 
-	spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
+	raw_spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
 	cause = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(i));
-	spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
+	raw_spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
 	for (i = SOCRATES_FPGA_NUM_IRQS - 1; i >= 0; i--) {
 		if (cause >> (i + 16))
 			break;
@@ -116,12 +116,12 @@ static void socrates_fpga_pic_ack(unsigned int virq)
 	hwirq = socrates_fpga_irq_to_hw(virq);
 
 	irq_line = fpga_irqs[hwirq].irq_line;
-	spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
+	raw_spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
 	mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line))
 		& SOCRATES_FPGA_IRQ_MASK;
 	mask |= (1 << (hwirq + 16));
 	socrates_fpga_pic_write(FPGA_PIC_IRQMASK(irq_line), mask);
-	spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
+	raw_spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
 }
 
 static void socrates_fpga_pic_mask(unsigned int virq)
@@ -134,12 +134,12 @@ static void socrates_fpga_pic_mask(unsigned int virq)
 	hwirq = socrates_fpga_irq_to_hw(virq);
 
 	irq_line = fpga_irqs[hwirq].irq_line;
-	spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
+	raw_spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
 	mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line))
 		& SOCRATES_FPGA_IRQ_MASK;
 	mask &= ~(1 << hwirq);
 	socrates_fpga_pic_write(FPGA_PIC_IRQMASK(irq_line), mask);
-	spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
+	raw_spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
 }
 
 static void socrates_fpga_pic_mask_ack(unsigned int virq)
@@ -152,13 +152,13 @@ static void socrates_fpga_pic_mask_ack(unsigned int virq)
 	hwirq = socrates_fpga_irq_to_hw(virq);
 
 	irq_line = fpga_irqs[hwirq].irq_line;
-	spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
+	raw_spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
 	mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line))
 		& SOCRATES_FPGA_IRQ_MASK;
 	mask &= ~(1 << hwirq);
 	mask |= (1 << (hwirq + 16));
 	socrates_fpga_pic_write(FPGA_PIC_IRQMASK(irq_line), mask);
-	spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
+	raw_spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
 }
 
 static void socrates_fpga_pic_unmask(unsigned int virq)
@@ -171,12 +171,12 @@ static void socrates_fpga_pic_unmask(unsigned int virq)
 	hwirq = socrates_fpga_irq_to_hw(virq);
 
 	irq_line = fpga_irqs[hwirq].irq_line;
-	spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
+	raw_spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
 	mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line))
 		& SOCRATES_FPGA_IRQ_MASK;
 	mask |= (1 << hwirq);
 	socrates_fpga_pic_write(FPGA_PIC_IRQMASK(irq_line), mask);
-	spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
+	raw_spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
 }
 
 static void socrates_fpga_pic_eoi(unsigned int virq)
@@ -189,12 +189,12 @@ static void socrates_fpga_pic_eoi(unsigned int virq)
 	hwirq = socrates_fpga_irq_to_hw(virq);
 
 	irq_line = fpga_irqs[hwirq].irq_line;
-	spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
+	raw_spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
 	mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line))
 		& SOCRATES_FPGA_IRQ_MASK;
 	mask |= (1 << (hwirq + 16));
 	socrates_fpga_pic_write(FPGA_PIC_IRQMASK(irq_line), mask);
-	spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
+	raw_spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
 }
 
 static int socrates_fpga_pic_set_type(unsigned int virq,
@@ -220,14 +220,14 @@ static int socrates_fpga_pic_set_type(unsigned int virq,
 	default:
 		return -EINVAL;
 	}
-	spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
+	raw_spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
 	mask = socrates_fpga_pic_read(FPGA_PIC_IRQCFG);
 	if (polarity)
 		mask |= (1 << hwirq);
 	else
 		mask &= ~(1 << hwirq);
 	socrates_fpga_pic_write(FPGA_PIC_IRQCFG, mask);
-	spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
+	raw_spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
 	return 0;
 }
 
@@ -314,14 +314,14 @@ void socrates_fpga_pic_init(struct device_node *pic)
 
 	socrates_fpga_pic_iobase = of_iomap(pic, 0);
 
-	spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
+	raw_spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
 	socrates_fpga_pic_write(FPGA_PIC_IRQMASK(0),
 			SOCRATES_FPGA_IRQ_MASK << 16);
 	socrates_fpga_pic_write(FPGA_PIC_IRQMASK(1),
 			SOCRATES_FPGA_IRQ_MASK << 16);
 	socrates_fpga_pic_write(FPGA_PIC_IRQMASK(2),
 			SOCRATES_FPGA_IRQ_MASK << 16);
-	spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
+	raw_spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
 
 	pr_info("FPGA PIC: Setting up Socrates FPGA PIC\n");
 }
diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index 2bbfd530d6d8..fbe9f3621424 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -33,32 +33,32 @@ config MPC8610_HPCD
 	  This option enables support for the MPC8610 HPCD board.
 
 config GEF_PPC9A
-	bool "GE Fanuc PPC9A"
+	bool "GE PPC9A"
 	select DEFAULT_UIMAGE
 	select MMIO_NVRAM
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
 	help
-	  This option enables support for GE Fanuc's PPC9A.
+	  This option enables support for the GE PPC9A.
 
 config GEF_SBC310
-	bool "GE Fanuc SBC310"
+	bool "GE SBC310"
 	select DEFAULT_UIMAGE
 	select MMIO_NVRAM
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
 	help
-	  This option enables support for GE Fanuc's SBC310.
+	  This option enables support for the GE SBC310.
 
 config GEF_SBC610
-	bool "GE Fanuc SBC610"
+	bool "GE SBC610"
 	select DEFAULT_UIMAGE
 	select MMIO_NVRAM
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
 	select HAS_RAPIDIO
 	help
-	  This option enables support for GE Fanuc's SBC610.
+	  This option enables support for the GE SBC610.
 
 endif
 
diff --git a/arch/powerpc/platforms/86xx/gef_gpio.c b/arch/powerpc/platforms/86xx/gef_gpio.c
index b2ea8875adba..11f7b2b6f49e 100644
--- a/arch/powerpc/platforms/86xx/gef_gpio.c
+++ b/arch/powerpc/platforms/86xx/gef_gpio.c
@@ -1,9 +1,9 @@
 /*
- * Driver for GE Fanuc's FPGA based GPIO pins
+ * Driver for GE FPGA based GPIO
  *
- * Author: Martyn Welch <martyn.welch@gefanuc.com>
+ * Author: Martyn Welch <martyn.welch@ge.com>
  *
- * 2008 (c) GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ * 2008 (c) GE Intelligent Platforms Embedded Systems, Inc.
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2.  This program is licensed "as is" without any warranty of any
@@ -164,6 +164,6 @@ static int __init gef_gpio_init(void)
 };
 arch_initcall(gef_gpio_init);
 
-MODULE_DESCRIPTION("GE Fanuc I/O FPGA GPIO driver");
-MODULE_AUTHOR("Martyn Welch <martyn.welch@gefanuc.com");
+MODULE_DESCRIPTION("GE I/O FPGA GPIO driver");
+MODULE_AUTHOR("Martyn Welch <martyn.welch@ge.com");
 MODULE_LICENSE("GPL");
diff --git a/arch/powerpc/platforms/86xx/gef_pic.c b/arch/powerpc/platforms/86xx/gef_pic.c
index 0110a8736d33..6df9e2561c06 100644
--- a/arch/powerpc/platforms/86xx/gef_pic.c
+++ b/arch/powerpc/platforms/86xx/gef_pic.c
@@ -1,9 +1,9 @@
 /*
- * Interrupt handling for GE Fanuc's FPGA based PIC
+ * Interrupt handling for GE FPGA based PIC
  *
- * Author: Martyn Welch <martyn.welch@gefanuc.com>
+ * Author: Martyn Welch <martyn.welch@ge.com>
  *
- * 2008 (c) GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ * 2008 (c) GE Intelligent Platforms Embedded Systems, Inc.
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2.  This program is licensed "as is" without any warranty of any
@@ -49,7 +49,7 @@
 #define gef_irq_to_hw(virq)    ((unsigned int)irq_map[virq].hwirq)
 
 
-static DEFINE_SPINLOCK(gef_pic_lock);
+static DEFINE_RAW_SPINLOCK(gef_pic_lock);
 
 static void __iomem *gef_pic_irq_reg_base;
 static struct irq_host *gef_pic_irq_host;
@@ -118,11 +118,11 @@ static void gef_pic_mask(unsigned int virq)
 
 	hwirq = gef_irq_to_hw(virq);
 
-	spin_lock_irqsave(&gef_pic_lock, flags);
+	raw_spin_lock_irqsave(&gef_pic_lock, flags);
 	mask = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0));
 	mask &= ~(1 << hwirq);
 	out_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0), mask);
-	spin_unlock_irqrestore(&gef_pic_lock, flags);
+	raw_spin_unlock_irqrestore(&gef_pic_lock, flags);
 }
 
 static void gef_pic_mask_ack(unsigned int virq)
@@ -141,11 +141,11 @@ static void gef_pic_unmask(unsigned int virq)
 
 	hwirq = gef_irq_to_hw(virq);
 
-	spin_lock_irqsave(&gef_pic_lock, flags);
+	raw_spin_lock_irqsave(&gef_pic_lock, flags);
 	mask = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0));
 	mask |= (1 << hwirq);
 	out_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0), mask);
-	spin_unlock_irqrestore(&gef_pic_lock, flags);
+	raw_spin_unlock_irqrestore(&gef_pic_lock, flags);
 }
 
 static struct irq_chip gef_pic_chip = {
@@ -199,7 +199,7 @@ void __init gef_pic_init(struct device_node *np)
 	/* Map the devices registers into memory */
 	gef_pic_irq_reg_base = of_iomap(np, 0);
 
-	spin_lock_irqsave(&gef_pic_lock, flags);
+	raw_spin_lock_irqsave(&gef_pic_lock, flags);
 
 	/* Initialise everything as masked. */
 	out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU0_INTR_MASK, 0);
@@ -208,7 +208,7 @@ void __init gef_pic_init(struct device_node *np)
 	out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU0_MCP_MASK, 0);
 	out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU1_MCP_MASK, 0);
 
-	spin_unlock_irqrestore(&gef_pic_lock, flags);
+	raw_spin_unlock_irqrestore(&gef_pic_lock, flags);
 
 	/* Map controller */
 	gef_pic_cascade_irq = irq_of_parse_and_map(np, 0);
diff --git a/arch/powerpc/platforms/86xx/gef_ppc9a.c b/arch/powerpc/platforms/86xx/gef_ppc9a.c
index a792e5d85813..60ce07e39100 100644
--- a/arch/powerpc/platforms/86xx/gef_ppc9a.c
+++ b/arch/powerpc/platforms/86xx/gef_ppc9a.c
@@ -1,9 +1,9 @@
 /*
- * GE Fanuc PPC9A board support
+ * GE PPC9A board support
  *
- * Author: Martyn Welch <martyn.welch@gefanuc.com>
+ * Author: Martyn Welch <martyn.welch@ge.com>
  *
- * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -82,7 +82,7 @@ static void __init gef_ppc9a_setup_arch(void)
 	}
 #endif
 
-	printk(KERN_INFO "GE Fanuc Intelligent Platforms PPC9A 6U VME SBC\n");
+	printk(KERN_INFO "GE Intelligent Platforms PPC9A 6U VME SBC\n");
 
 #ifdef CONFIG_SMP
 	mpc86xx_smp_init();
@@ -151,7 +151,7 @@ static void gef_ppc9a_show_cpuinfo(struct seq_file *m)
 {
 	uint svid = mfspr(SPRN_SVR);
 
-	seq_printf(m, "Vendor\t\t: GE Fanuc Intelligent Platforms\n");
+	seq_printf(m, "Vendor\t\t: GE Intelligent Platforms\n");
 
 	seq_printf(m, "Revision\t: %u%c\n", gef_ppc9a_get_pcb_rev(),
 		('A' + gef_ppc9a_get_board_rev()));
@@ -235,7 +235,7 @@ static int __init declare_of_platform_devices(void)
 machine_device_initcall(gef_ppc9a, declare_of_platform_devices);
 
 define_machine(gef_ppc9a) {
-	.name			= "GE Fanuc PPC9A",
+	.name			= "GE PPC9A",
 	.probe			= gef_ppc9a_probe,
 	.setup_arch		= gef_ppc9a_setup_arch,
 	.init_IRQ		= gef_ppc9a_init_irq,
diff --git a/arch/powerpc/platforms/86xx/gef_sbc310.c b/arch/powerpc/platforms/86xx/gef_sbc310.c
index 6a1a613836c2..3ecee25bf3ed 100644
--- a/arch/powerpc/platforms/86xx/gef_sbc310.c
+++ b/arch/powerpc/platforms/86xx/gef_sbc310.c
@@ -1,9 +1,9 @@
 /*
- * GE Fanuc SBC310 board support
+ * GE SBC310 board support
  *
- * Author: Martyn Welch <martyn.welch@gefanuc.com>
+ * Author: Martyn Welch <martyn.welch@ge.com>
  *
- * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -82,7 +82,7 @@ static void __init gef_sbc310_setup_arch(void)
 	}
 #endif
 
-	printk(KERN_INFO "GE Fanuc Intelligent Platforms SBC310 6U VPX SBC\n");
+	printk(KERN_INFO "GE Intelligent Platforms SBC310 6U VPX SBC\n");
 
 #ifdef CONFIG_SMP
 	mpc86xx_smp_init();
@@ -142,7 +142,7 @@ static void gef_sbc310_show_cpuinfo(struct seq_file *m)
 {
 	uint svid = mfspr(SPRN_SVR);
 
-	seq_printf(m, "Vendor\t\t: GE Fanuc Intelligent Platforms\n");
+	seq_printf(m, "Vendor\t\t: GE Intelligent Platforms\n");
 
 	seq_printf(m, "Board ID\t: 0x%2.2x\n", gef_sbc310_get_board_id());
 	seq_printf(m, "Revision\t: %u%c\n", gef_sbc310_get_pcb_rev(),
@@ -223,7 +223,7 @@ static int __init declare_of_platform_devices(void)
 machine_device_initcall(gef_sbc310, declare_of_platform_devices);
 
 define_machine(gef_sbc310) {
-	.name			= "GE Fanuc SBC310",
+	.name			= "GE SBC310",
 	.probe			= gef_sbc310_probe,
 	.setup_arch		= gef_sbc310_setup_arch,
 	.init_IRQ		= gef_sbc310_init_irq,
diff --git a/arch/powerpc/platforms/86xx/gef_sbc610.c b/arch/powerpc/platforms/86xx/gef_sbc610.c
index e10688a0fc4e..5090d608d9ee 100644
--- a/arch/powerpc/platforms/86xx/gef_sbc610.c
+++ b/arch/powerpc/platforms/86xx/gef_sbc610.c
@@ -1,9 +1,9 @@
 /*
- * GE Fanuc SBC610 board support
+ * GE SBC610 board support
  *
- * Author: Martyn Welch <martyn.welch@gefanuc.com>
+ * Author: Martyn Welch <martyn.welch@ge.com>
  *
- * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -82,7 +82,7 @@ static void __init gef_sbc610_setup_arch(void)
 	}
 #endif
 
-	printk(KERN_INFO "GE Fanuc Intelligent Platforms SBC610 6U VPX SBC\n");
+	printk(KERN_INFO "GE Intelligent Platforms SBC610 6U VPX SBC\n");
 
 #ifdef CONFIG_SMP
 	mpc86xx_smp_init();
@@ -133,7 +133,7 @@ static void gef_sbc610_show_cpuinfo(struct seq_file *m)
 {
 	uint svid = mfspr(SPRN_SVR);
 
-	seq_printf(m, "Vendor\t\t: GE Fanuc Intelligent Platforms\n");
+	seq_printf(m, "Vendor\t\t: GE Intelligent Platforms\n");
 
 	seq_printf(m, "Revision\t: %u%c\n", gef_sbc610_get_pcb_rev(),
 		('A' + gef_sbc610_get_board_rev() - 1));
@@ -212,7 +212,7 @@ static int __init declare_of_platform_devices(void)
 machine_device_initcall(gef_sbc610, declare_of_platform_devices);
 
 define_machine(gef_sbc610) {
-	.name			= "GE Fanuc SBC610",
+	.name			= "GE SBC610",
 	.probe			= gef_sbc610_probe,
 	.setup_arch		= gef_sbc610_setup_arch,
 	.init_IRQ		= gef_sbc610_init_irq,
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index fa0f690d3867..a8aae0b54579 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -144,6 +144,16 @@ config FSL_EMB_PERFMON
 	  and some e300 cores (c3 and c4).  Select this only if your
 	  core supports the Embedded Performance Monitor APU
 
+config FSL_EMB_PERF_EVENT
+	bool
+	depends on FSL_EMB_PERFMON && PERF_EVENTS && !PPC_PERF_CTRS
+	default y
+
+config FSL_EMB_PERF_EVENT_E500
+	bool
+	depends on FSL_EMB_PERF_EVENT && E500
+	default y
+
 config 4xx
 	bool
 	depends on 40x || 44x
diff --git a/arch/powerpc/platforms/iseries/exception.S b/arch/powerpc/platforms/iseries/exception.S
index 5369653dcf6a..fba5bf915073 100644
--- a/arch/powerpc/platforms/iseries/exception.S
+++ b/arch/powerpc/platforms/iseries/exception.S
@@ -43,17 +43,14 @@ system_reset_iSeries:
 	LOAD_REG_ADDR(r23, alpaca)
 	li	r0,ALPACA_SIZE
 	sub	r23,r13,r23
-	divdu	r23,r23,r0		/* r23 has cpu number */
-	LOAD_REG_ADDR(r13, paca)
-	mulli	r0,r23,PACA_SIZE
-	add	r13,r13,r0
-	mtspr	SPRN_SPRG_PACA,r13	/* Save it away for the future */
-	mfmsr	r24
-	ori	r24,r24,MSR_RI
-	mtmsrd	r24			/* RI on */
-	mr	r24,r23
+	divdu	r24,r23,r0		/* r24 has cpu number */
 	cmpwi	0,r24,0			/* Are we processor 0? */
 	bne	1f
+	LOAD_REG_ADDR(r13, boot_paca)
+	mtspr	SPRN_SPRG_PACA,r13	/* Save it away for the future */
+	mfmsr	r23
+	ori	r23,r23,MSR_RI
+	mtmsrd	r23			/* RI on */
 	b	.__start_initialization_iSeries	/* Start up the first processor */
 1:	mfspr	r4,SPRN_CTRLF
 	li	r5,CTRL_RUNLATCH	/* Turn off the run light */
@@ -86,6 +83,16 @@ system_reset_iSeries:
 #endif
 
 2:
+	/* Load our paca now that it's been allocated */
+	LOAD_REG_ADDR(r13, paca)
+	ld	r13,0(r13)
+	mulli	r0,r24,PACA_SIZE
+	add	r13,r13,r0
+	mtspr	SPRN_SPRG_PACA,r13	/* Save it away for the future */
+	mfmsr	r23
+	ori	r23,r23,MSR_RI
+	mtmsrd	r23			/* RI on */
+
 	HMT_LOW
 #ifdef CONFIG_SMP
 	lbz	r23,PACAPROCSTART(r13)	/* Test if this processor
diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c
index d1b124e44d77..a8e1d5d17a28 100644
--- a/arch/powerpc/platforms/pseries/hotplug-cpu.c
+++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c
@@ -122,44 +122,32 @@ static void pseries_mach_cpu_die(void)
 		if (!get_lppaca()->shared_proc)
 			get_lppaca()->donate_dedicated_cpu = 1;
 
-		printk(KERN_INFO
-			"cpu %u (hwid %u) ceding for offline with hint %d\n",
-			cpu, hwcpu, cede_latency_hint);
 		while (get_preferred_offline_state(cpu) == CPU_STATE_INACTIVE) {
 			extended_cede_processor(cede_latency_hint);
-			printk(KERN_INFO "cpu %u (hwid %u) returned from cede.\n",
-				cpu, hwcpu);
-			printk(KERN_INFO
-			"Decrementer value = %x Timebase value = %llx\n",
-			get_dec(), get_tb());
 		}
 
-		printk(KERN_INFO "cpu %u (hwid %u) got prodded to go online\n",
-			cpu, hwcpu);
-
 		if (!get_lppaca()->shared_proc)
 			get_lppaca()->donate_dedicated_cpu = 0;
 		get_lppaca()->idle = 0;
-	}
 
-	if (get_preferred_offline_state(cpu) == CPU_STATE_ONLINE) {
-		unregister_slb_shadow(hwcpu, __pa(get_slb_shadow()));
+		if (get_preferred_offline_state(cpu) == CPU_STATE_ONLINE) {
+			unregister_slb_shadow(hwcpu, __pa(get_slb_shadow()));
 
-		/*
-		 * NOTE: Calling start_secondary() here for now to
-		 * start new context.
-		 * However, need to do it cleanly by resetting the
-		 * stack pointer.
-		 */
-		start_secondary();
+			/*
+			 * Call to start_secondary_resume() will not return.
+			 * Kernel stack will be reset and start_secondary()
+			 * will be called to continue the online operation.
+			 */
+			start_secondary_resume();
+		}
+	}
 
-	} else if (get_preferred_offline_state(cpu) == CPU_STATE_OFFLINE) {
+	/* Requested state is CPU_STATE_OFFLINE at this point */
+	WARN_ON(get_preferred_offline_state(cpu) != CPU_STATE_OFFLINE);
 
-		set_cpu_current_state(cpu, CPU_STATE_OFFLINE);
-		unregister_slb_shadow(hard_smp_processor_id(),
-					__pa(get_slb_shadow()));
-		rtas_stop_self();
-	}
+	set_cpu_current_state(cpu, CPU_STATE_OFFLINE);
+	unregister_slb_shadow(hwcpu, __pa(get_slb_shadow()));
+	rtas_stop_self();
 
 	/* Should never get here... */
 	BUG();
diff --git a/arch/powerpc/platforms/pseries/offline_states.h b/arch/powerpc/platforms/pseries/offline_states.h
index 22574e0d9d91..75a6f480d931 100644
--- a/arch/powerpc/platforms/pseries/offline_states.h
+++ b/arch/powerpc/platforms/pseries/offline_states.h
@@ -9,10 +9,31 @@ enum cpu_state_vals {
 	CPU_MAX_OFFLINE_STATES
 };
 
+#ifdef CONFIG_HOTPLUG_CPU
 extern enum cpu_state_vals get_cpu_current_state(int cpu);
 extern void set_cpu_current_state(int cpu, enum cpu_state_vals state);
-extern enum cpu_state_vals get_preferred_offline_state(int cpu);
 extern void set_preferred_offline_state(int cpu, enum cpu_state_vals state);
 extern void set_default_offline_state(int cpu);
+#else
+static inline enum cpu_state_vals get_cpu_current_state(int cpu)
+{
+	return CPU_STATE_ONLINE;
+}
+
+static inline void set_cpu_current_state(int cpu, enum cpu_state_vals state)
+{
+}
+
+static inline void set_preferred_offline_state(int cpu, enum cpu_state_vals state)
+{
+}
+
+static inline void set_default_offline_state(int cpu)
+{
+}
+#endif
+
+extern enum cpu_state_vals get_preferred_offline_state(int cpu);
 extern int start_secondary(void);
+extern void start_secondary_resume(void);
 #endif
diff --git a/arch/powerpc/platforms/pseries/plpar_wrappers.h b/arch/powerpc/platforms/pseries/plpar_wrappers.h
index 0603c91538ae..a05f8d427856 100644
--- a/arch/powerpc/platforms/pseries/plpar_wrappers.h
+++ b/arch/powerpc/platforms/pseries/plpar_wrappers.h
@@ -259,12 +259,12 @@ static inline long plpar_ipi(unsigned long servernum, unsigned long mfrr)
 	return plpar_hcall_norets(H_IPI, servernum, mfrr);
 }
 
-static inline long plpar_xirr(unsigned long *xirr_ret)
+static inline long plpar_xirr(unsigned long *xirr_ret, unsigned char cppr)
 {
 	long rc;
 	unsigned long retbuf[PLPAR_HCALL_BUFSIZE];
 
-	rc = plpar_hcall(H_XIRR, retbuf);
+	rc = plpar_hcall(H_XIRR, retbuf, cppr);
 
 	*xirr_ret = retbuf[0];
 
diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c
index 4ca641042ec3..1bcedd8b4616 100644
--- a/arch/powerpc/platforms/pseries/xics.c
+++ b/arch/powerpc/platforms/pseries/xics.c
@@ -120,12 +120,12 @@ static inline void direct_qirr_info(int n_cpu, u8 value)
 
 /* LPAR low level accessors */
 
-static inline unsigned int lpar_xirr_info_get(void)
+static inline unsigned int lpar_xirr_info_get(unsigned char cppr)
 {
 	unsigned long lpar_rc;
 	unsigned long return_value;
 
-	lpar_rc = plpar_xirr(&return_value);
+	lpar_rc = plpar_xirr(&return_value, cppr);
 	if (lpar_rc != H_SUCCESS)
 		panic(" bad return code xirr - rc = %lx\n", lpar_rc);
 	return (unsigned int)return_value;
@@ -331,7 +331,8 @@ static unsigned int xics_get_irq_direct(void)
 
 static unsigned int xics_get_irq_lpar(void)
 {
-	unsigned int xirr = lpar_xirr_info_get();
+	struct xics_cppr *os_cppr = &__get_cpu_var(xics_cppr);
+	unsigned int xirr = lpar_xirr_info_get(os_cppr->stack[os_cppr->index]);
 	unsigned int vec = xics_xirr_vector(xirr);
 	unsigned int irq;
 
diff --git a/arch/powerpc/sysdev/cpm2_pic.h b/arch/powerpc/sysdev/cpm2_pic.h
index 30e5828a2781..2c5f70c24485 100644
--- a/arch/powerpc/sysdev/cpm2_pic.h
+++ b/arch/powerpc/sysdev/cpm2_pic.h
@@ -3,6 +3,6 @@
 
 extern unsigned int cpm2_get_irq(void);
 
-extern void cpm2_pic_init(struct device_node*);
+extern void cpm2_pic_init(struct device_node *);
 
 #endif /* _PPC_KERNEL_CPM2_H */
diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c
index d927da893ec4..541ba9863647 100644
--- a/arch/powerpc/sysdev/qe_lib/qe_ic.c
+++ b/arch/powerpc/sysdev/qe_lib/qe_ic.c
@@ -33,7 +33,7 @@
 
 #include "qe_ic.h"
 
-static DEFINE_SPINLOCK(qe_ic_lock);
+static DEFINE_RAW_SPINLOCK(qe_ic_lock);
 
 static struct qe_ic_info qe_ic_info[] = {
 	[1] = {
@@ -201,13 +201,13 @@ static void qe_ic_unmask_irq(unsigned int virq)
 	unsigned long flags;
 	u32 temp;
 
-	spin_lock_irqsave(&qe_ic_lock, flags);
+	raw_spin_lock_irqsave(&qe_ic_lock, flags);
 
 	temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg);
 	qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg,
 		    temp | qe_ic_info[src].mask);
 
-	spin_unlock_irqrestore(&qe_ic_lock, flags);
+	raw_spin_unlock_irqrestore(&qe_ic_lock, flags);
 }
 
 static void qe_ic_mask_irq(unsigned int virq)
@@ -217,7 +217,7 @@ static void qe_ic_mask_irq(unsigned int virq)
 	unsigned long flags;
 	u32 temp;
 
-	spin_lock_irqsave(&qe_ic_lock, flags);
+	raw_spin_lock_irqsave(&qe_ic_lock, flags);
 
 	temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg);
 	qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg,
@@ -233,7 +233,7 @@ static void qe_ic_mask_irq(unsigned int virq)
 	 */
 	mb();
 
-	spin_unlock_irqrestore(&qe_ic_lock, flags);
+	raw_spin_unlock_irqrestore(&qe_ic_lock, flags);
 }
 
 static struct irq_chip qe_ic_irq_chip = {
diff --git a/arch/s390/crypto/sha_common.c b/arch/s390/crypto/sha_common.c
index 7903ec47e6b9..f42dbabc0d30 100644
--- a/arch/s390/crypto/sha_common.c
+++ b/arch/s390/crypto/sha_common.c
@@ -79,7 +79,7 @@ int s390_sha_final(struct shash_desc *desc, u8 *out)
 	memset(ctx->buf + index, 0x00, end - index - 8);
 
 	/*
-	 * Append message length. Well, SHA-512 wants a 128 bit lenght value,
+	 * Append message length. Well, SHA-512 wants a 128 bit length value,
 	 * nevertheless we use u64, should be enough for now...
 	 */
 	bits = ctx->count * 8;
diff --git a/arch/s390/include/asm/cio.h b/arch/s390/include/asm/cio.h
index e85679af54dd..e34347d567a6 100644
--- a/arch/s390/include/asm/cio.h
+++ b/arch/s390/include/asm/cio.h
@@ -20,7 +20,7 @@
 /**
  * struct ccw1 - channel command word
  * @cmd_code: command code
- * @flags: flags, like IDA adressing, etc.
+ * @flags: flags, like IDA addressing, etc.
  * @count: byte count
  * @cda: data address
  *
diff --git a/arch/s390/include/asm/compat.h b/arch/s390/include/asm/compat.h
index 01a08020bc0e..104f2007f097 100644
--- a/arch/s390/include/asm/compat.h
+++ b/arch/s390/include/asm/compat.h
@@ -35,7 +35,8 @@
 
 extern long psw32_user_bits;
 
-#define COMPAT_USER_HZ	100
+#define COMPAT_USER_HZ		100
+#define COMPAT_UTS_MACHINE	"s390\0\0\0\0"
 
 typedef u32		compat_size_t;
 typedef s32		compat_ssize_t;
diff --git a/arch/s390/include/asm/ptrace.h b/arch/s390/include/asm/ptrace.h
index dd2d913afcae..fef9b33cdd59 100644
--- a/arch/s390/include/asm/ptrace.h
+++ b/arch/s390/include/asm/ptrace.h
@@ -489,9 +489,6 @@ struct user_regs_struct
  * These are defined as per linux/ptrace.h, which see.
  */
 #define arch_has_single_step()	(1)
-struct task_struct;
-extern void user_enable_single_step(struct task_struct *);
-extern void user_disable_single_step(struct task_struct *);
 extern void show_regs(struct pt_regs * regs);
 
 #define user_mode(regs) (((regs)->psw.mask & PSW_MASK_PSTATE) != 0)
diff --git a/arch/s390/include/asm/qdio.h b/arch/s390/include/asm/qdio.h
index c666bfe5e984..9b04b1102bbc 100644
--- a/arch/s390/include/asm/qdio.h
+++ b/arch/s390/include/asm/qdio.h
@@ -321,11 +321,6 @@ typedef void qdio_handler_t(struct ccw_device *, unsigned int, int,
 #define QDIO_ERROR_ACTIVATE_CHECK_CONDITION	0x40
 #define QDIO_ERROR_SLSB_STATE			0x80
 
-/* for qdio_initialize */
-#define QDIO_INBOUND_0COPY_SBALS		0x01
-#define QDIO_OUTBOUND_0COPY_SBALS		0x02
-#define QDIO_USE_OUTBOUND_PCIS			0x04
-
 /* for qdio_cleanup */
 #define QDIO_FLAG_CLEANUP_USING_CLEAR		0x01
 #define QDIO_FLAG_CLEANUP_USING_HALT		0x02
@@ -344,7 +339,6 @@ typedef void qdio_handler_t(struct ccw_device *, unsigned int, int,
  * @input_handler: handler to be called for input queues
  * @output_handler: handler to be called for output queues
  * @int_parm: interruption parameter
- * @flags: initialization flags
  * @input_sbal_addr_array:  address of no_input_qs * 128 pointers
  * @output_sbal_addr_array: address of no_output_qs * 128 pointers
  */
@@ -361,7 +355,6 @@ struct qdio_initialize {
 	qdio_handler_t *input_handler;
 	qdio_handler_t *output_handler;
 	unsigned long int_parm;
-	unsigned long flags;
 	void **input_sbal_addr_array;
 	void **output_sbal_addr_array;
 };
diff --git a/arch/s390/include/asm/unistd.h b/arch/s390/include/asm/unistd.h
index 6e9f049fa823..5f0075150a65 100644
--- a/arch/s390/include/asm/unistd.h
+++ b/arch/s390/include/asm/unistd.h
@@ -392,6 +392,7 @@
 #define __ARCH_WANT_SYS_LLSEEK
 #define __ARCH_WANT_SYS_NICE
 #define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLD_MMAP
 #define __ARCH_WANT_SYS_OLDUMOUNT
 #define __ARCH_WANT_SYS_SIGPENDING
 #define __ARCH_WANT_SYS_SIGPROCMASK
diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S
index 30de2d0e52bb..672ce52341b4 100644
--- a/arch/s390/kernel/compat_wrapper.S
+++ b/arch/s390/kernel/compat_wrapper.S
@@ -547,7 +547,7 @@ sys32_setdomainname_wrapper:
 	.globl	sys32_newuname_wrapper
 sys32_newuname_wrapper:
 	llgtr	%r2,%r2			# struct new_utsname *
-	jg	sys_s390_newuname	# branch to system call
+	jg	sys_newuname		# branch to system call
 
 	.globl	compat_sys_adjtimex_wrapper
 compat_sys_adjtimex_wrapper:
diff --git a/arch/s390/kernel/entry.h b/arch/s390/kernel/entry.h
index e1e5e767ab56..eb15c12ec158 100644
--- a/arch/s390/kernel/entry.h
+++ b/arch/s390/kernel/entry.h
@@ -24,17 +24,13 @@ int __cpuinit start_secondary(void *cpuvoid);
 void __init startup_init(void);
 void die(const char * str, struct pt_regs * regs, long err);
 
-struct new_utsname;
-struct mmap_arg_struct;
+struct s390_mmap_arg_struct;
 struct fadvise64_64_args;
 struct old_sigaction;
-struct sel_arg_struct;
 
-long sys_mmap2(struct mmap_arg_struct __user  *arg);
-long sys_s390_old_mmap(struct mmap_arg_struct __user *arg);
-long sys_ipc(uint call, int first, unsigned long second,
+long sys_mmap2(struct s390_mmap_arg_struct __user  *arg);
+long sys_s390_ipc(uint call, int first, unsigned long second,
 	     unsigned long third, void __user *ptr);
-long sys_s390_newuname(struct new_utsname __user *name);
 long sys_s390_personality(unsigned long personality);
 long sys_s390_fadvise64(int fd, u32 offset_high, u32 offset_low,
 		    size_t len, int advice);
diff --git a/arch/s390/kernel/sclp.S b/arch/s390/kernel/sclp.S
index 27af3bf3a009..2e82fdd89320 100644
--- a/arch/s390/kernel/sclp.S
+++ b/arch/s390/kernel/sclp.S
@@ -235,7 +235,7 @@ _sclp_print:
 	lh	%r9,0(%r8)			# update sccb length
 	ar	%r9,%r6
 	sth	%r9,0(%r8)
-	ar	%r7,%r6				# update current mto adress
+	ar	%r7,%r6				# update current mto address
 	ltr	%r0,%r0				# more characters?
 	jnz	.LinitmtoS4
 	l	%r2,.LwritedataS4-.LbaseS4(%r13)# write data
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 8b10127c00ad..29f65bce55e1 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -1020,7 +1020,9 @@ out:
 	return rc;
 }
 
-static ssize_t __ref rescan_store(struct sysdev_class *class, const char *buf,
+static ssize_t __ref rescan_store(struct sysdev_class *class,
+				  struct sysdev_class_attribute *attr,
+				  const char *buf,
 				  size_t count)
 {
 	int rc;
@@ -1031,7 +1033,9 @@ static ssize_t __ref rescan_store(struct sysdev_class *class, const char *buf,
 static SYSDEV_CLASS_ATTR(rescan, 0200, NULL, rescan_store);
 #endif /* CONFIG_HOTPLUG_CPU */
 
-static ssize_t dispatching_show(struct sysdev_class *class, char *buf)
+static ssize_t dispatching_show(struct sysdev_class *class,
+				struct sysdev_class_attribute *attr,
+				char *buf)
 {
 	ssize_t count;
 
@@ -1041,7 +1045,9 @@ static ssize_t dispatching_show(struct sysdev_class *class, char *buf)
 	return count;
 }
 
-static ssize_t dispatching_store(struct sysdev_class *dev, const char *buf,
+static ssize_t dispatching_store(struct sysdev_class *dev,
+				 struct sysdev_class_attribute *attr,
+				 const char *buf,
 				 size_t count)
 {
 	int val, rc;
diff --git a/arch/s390/kernel/sys_s390.c b/arch/s390/kernel/sys_s390.c
index 86a74c9c9e63..7b6b0f81a283 100644
--- a/arch/s390/kernel/sys_s390.c
+++ b/arch/s390/kernel/sys_s390.c
@@ -33,13 +33,12 @@
 #include "entry.h"
 
 /*
- * Perform the select(nd, in, out, ex, tv) and mmap() system
- * calls. Linux for S/390 isn't able to handle more than 5
- * system call parameters, so these system calls used a memory
- * block for parameter passing..
+ * Perform the mmap() system call. Linux for S/390 isn't able to handle more
+ * than 5 system call parameters, so this system call uses a memory block
+ * for parameter passing.
  */
 
-struct mmap_arg_struct {
+struct s390_mmap_arg_struct {
 	unsigned long addr;
 	unsigned long len;
 	unsigned long prot;
@@ -48,9 +47,9 @@ struct mmap_arg_struct {
 	unsigned long offset;
 };
 
-SYSCALL_DEFINE1(mmap2, struct mmap_arg_struct __user *, arg)
+SYSCALL_DEFINE1(mmap2, struct s390_mmap_arg_struct __user *, arg)
 {
-	struct mmap_arg_struct a;
+	struct s390_mmap_arg_struct a;
 	int error = -EFAULT;
 
 	if (copy_from_user(&a, arg, sizeof(a)))
@@ -60,29 +59,12 @@ out:
 	return error;
 }
 
-SYSCALL_DEFINE1(s390_old_mmap, struct mmap_arg_struct __user *, arg)
-{
-	struct mmap_arg_struct a;
-	long error = -EFAULT;
-
-	if (copy_from_user(&a, arg, sizeof(a)))
-		goto out;
-
-	error = -EINVAL;
-	if (a.offset & ~PAGE_MASK)
-		goto out;
-
-	error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, a.offset >> PAGE_SHIFT);
-out:
-	return error;
-}
-
 /*
  * sys_ipc() is the de-multiplexer for the SysV IPC calls..
  *
  * This is really horribly ugly.
  */
-SYSCALL_DEFINE5(ipc, uint, call, int, first, unsigned long, second,
+SYSCALL_DEFINE5(s390_ipc, uint, call, int, first, unsigned long, second,
 		unsigned long, third, void __user *, ptr)
 {
         struct ipc_kludge tmp;
@@ -149,17 +131,6 @@ SYSCALL_DEFINE5(ipc, uint, call, int, first, unsigned long, second,
 }
 
 #ifdef CONFIG_64BIT
-SYSCALL_DEFINE1(s390_newuname, struct new_utsname __user *, name)
-{
-	int ret = sys_newuname(name);
-
-	if (personality(current->personality) == PER_LINUX32 && !ret) {
-		ret = copy_to_user(name->machine, "s390\0\0\0\0", 8);
-		if (ret) ret = -EFAULT;
-	}
-	return ret;
-}
-
 SYSCALL_DEFINE1(s390_personality, unsigned long, personality)
 {
 	int ret;
diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S
index 30eca070d426..201ce6bed34e 100644
--- a/arch/s390/kernel/syscalls.S
+++ b/arch/s390/kernel/syscalls.S
@@ -98,7 +98,7 @@ SYSCALL(sys_uselib,sys_uselib,sys32_uselib_wrapper)
 SYSCALL(sys_swapon,sys_swapon,sys32_swapon_wrapper)
 SYSCALL(sys_reboot,sys_reboot,sys32_reboot_wrapper)
 SYSCALL(sys_ni_syscall,sys_ni_syscall,old32_readdir_wrapper)	/* old readdir syscall */
-SYSCALL(sys_s390_old_mmap,sys_s390_old_mmap,old32_mmap_wrapper)	/* 90 */
+SYSCALL(sys_old_mmap,sys_old_mmap,old32_mmap_wrapper)		/* 90 */
 SYSCALL(sys_munmap,sys_munmap,sys32_munmap_wrapper)
 SYSCALL(sys_truncate,sys_truncate,sys32_truncate_wrapper)
 SYSCALL(sys_ftruncate,sys_ftruncate,sys32_ftruncate_wrapper)
@@ -125,12 +125,12 @@ NI_SYSCALL							/* vm86old for i386 */
 SYSCALL(sys_wait4,sys_wait4,compat_sys_wait4_wrapper)
 SYSCALL(sys_swapoff,sys_swapoff,sys32_swapoff_wrapper)		/* 115 */
 SYSCALL(sys_sysinfo,sys_sysinfo,compat_sys_sysinfo_wrapper)
-SYSCALL(sys_ipc,sys_ipc,sys32_ipc_wrapper)
+SYSCALL(sys_s390_ipc,sys_s390_ipc,sys32_ipc_wrapper)
 SYSCALL(sys_fsync,sys_fsync,sys32_fsync_wrapper)
 SYSCALL(sys_sigreturn,sys_sigreturn,sys32_sigreturn)
 SYSCALL(sys_clone,sys_clone,sys_clone_wrapper)			/* 120 */
 SYSCALL(sys_setdomainname,sys_setdomainname,sys32_setdomainname_wrapper)
-SYSCALL(sys_newuname,sys_s390_newuname,sys32_newuname_wrapper)
+SYSCALL(sys_newuname,sys_newuname,sys32_newuname_wrapper)
 NI_SYSCALL							/* modify_ldt for i386 */
 SYSCALL(sys_adjtimex,sys_adjtimex,compat_sys_adjtimex_wrapper)
 SYSCALL(sys_mprotect,sys_mprotect,sys32_mprotect_wrapper)	/* 125 */
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index a8f93f1705ad..aa2483e460f3 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -73,15 +73,15 @@ unsigned long long monotonic_clock(void)
 }
 EXPORT_SYMBOL(monotonic_clock);
 
-void tod_to_timeval(__u64 todval, struct timespec *xtime)
+void tod_to_timeval(__u64 todval, struct timespec *xt)
 {
 	unsigned long long sec;
 
 	sec = todval >> 12;
 	do_div(sec, 1000000);
-	xtime->tv_sec = sec;
+	xt->tv_sec = sec;
 	todval -= (sec * 1000000) << 12;
-	xtime->tv_nsec = ((todval * 1000) >> 12);
+	xt->tv_nsec = ((todval * 1000) >> 12);
 }
 EXPORT_SYMBOL(tod_to_timeval);
 
@@ -216,8 +216,8 @@ void update_vsyscall(struct timespec *wall_time, struct clocksource *clock,
 	++vdso_data->tb_update_count;
 	smp_wmb();
 	vdso_data->xtime_tod_stamp = clock->cycle_last;
-	vdso_data->xtime_clock_sec = xtime.tv_sec;
-	vdso_data->xtime_clock_nsec = xtime.tv_nsec;
+	vdso_data->xtime_clock_sec = wall_time->tv_sec;
+	vdso_data->xtime_clock_nsec = wall_time->tv_nsec;
 	vdso_data->wtom_clock_sec = wall_to_monotonic.tv_sec;
 	vdso_data->wtom_clock_nsec = wall_to_monotonic.tv_nsec;
 	smp_wmb();
@@ -1116,14 +1116,18 @@ static struct sys_device etr_port1_dev = {
 /*
  * ETR class attributes
  */
-static ssize_t etr_stepping_port_show(struct sysdev_class *class, char *buf)
+static ssize_t etr_stepping_port_show(struct sysdev_class *class,
+					struct sysdev_class_attribute *attr,
+					char *buf)
 {
 	return sprintf(buf, "%i\n", etr_port0.esw.p);
 }
 
 static SYSDEV_CLASS_ATTR(stepping_port, 0400, etr_stepping_port_show, NULL);
 
-static ssize_t etr_stepping_mode_show(struct sysdev_class *class, char *buf)
+static ssize_t etr_stepping_mode_show(struct sysdev_class *class,
+				      	struct sysdev_class_attribute *attr,
+					char *buf)
 {
 	char *mode_str;
 
@@ -1584,7 +1588,9 @@ static struct sysdev_class stp_sysclass = {
 	.name	= "stp",
 };
 
-static ssize_t stp_ctn_id_show(struct sysdev_class *class, char *buf)
+static ssize_t stp_ctn_id_show(struct sysdev_class *class,
+				struct sysdev_class_attribute *attr,
+				char *buf)
 {
 	if (!stp_online)
 		return -ENODATA;
@@ -1594,7 +1600,9 @@ static ssize_t stp_ctn_id_show(struct sysdev_class *class, char *buf)
 
 static SYSDEV_CLASS_ATTR(ctn_id, 0400, stp_ctn_id_show, NULL);
 
-static ssize_t stp_ctn_type_show(struct sysdev_class *class, char *buf)
+static ssize_t stp_ctn_type_show(struct sysdev_class *class,
+				struct sysdev_class_attribute *attr,
+				char *buf)
 {
 	if (!stp_online)
 		return -ENODATA;
@@ -1603,7 +1611,9 @@ static ssize_t stp_ctn_type_show(struct sysdev_class *class, char *buf)
 
 static SYSDEV_CLASS_ATTR(ctn_type, 0400, stp_ctn_type_show, NULL);
 
-static ssize_t stp_dst_offset_show(struct sysdev_class *class, char *buf)
+static ssize_t stp_dst_offset_show(struct sysdev_class *class,
+				   struct sysdev_class_attribute *attr,
+				   char *buf)
 {
 	if (!stp_online || !(stp_info.vbits & 0x2000))
 		return -ENODATA;
@@ -1612,7 +1622,9 @@ static ssize_t stp_dst_offset_show(struct sysdev_class *class, char *buf)
 
 static SYSDEV_CLASS_ATTR(dst_offset, 0400, stp_dst_offset_show, NULL);
 
-static ssize_t stp_leap_seconds_show(struct sysdev_class *class, char *buf)
+static ssize_t stp_leap_seconds_show(struct sysdev_class *class,
+					struct sysdev_class_attribute *attr,
+					char *buf)
 {
 	if (!stp_online || !(stp_info.vbits & 0x8000))
 		return -ENODATA;
@@ -1621,7 +1633,9 @@ static ssize_t stp_leap_seconds_show(struct sysdev_class *class, char *buf)
 
 static SYSDEV_CLASS_ATTR(leap_seconds, 0400, stp_leap_seconds_show, NULL);
 
-static ssize_t stp_stratum_show(struct sysdev_class *class, char *buf)
+static ssize_t stp_stratum_show(struct sysdev_class *class,
+				struct sysdev_class_attribute *attr,
+				char *buf)
 {
 	if (!stp_online)
 		return -ENODATA;
@@ -1630,7 +1644,9 @@ static ssize_t stp_stratum_show(struct sysdev_class *class, char *buf)
 
 static SYSDEV_CLASS_ATTR(stratum, 0400, stp_stratum_show, NULL);
 
-static ssize_t stp_time_offset_show(struct sysdev_class *class, char *buf)
+static ssize_t stp_time_offset_show(struct sysdev_class *class,
+				struct sysdev_class_attribute *attr,
+				char *buf)
 {
 	if (!stp_online || !(stp_info.vbits & 0x0800))
 		return -ENODATA;
@@ -1639,7 +1655,9 @@ static ssize_t stp_time_offset_show(struct sysdev_class *class, char *buf)
 
 static SYSDEV_CLASS_ATTR(time_offset, 0400, stp_time_offset_show, NULL);
 
-static ssize_t stp_time_zone_offset_show(struct sysdev_class *class, char *buf)
+static ssize_t stp_time_zone_offset_show(struct sysdev_class *class,
+				struct sysdev_class_attribute *attr,
+				char *buf)
 {
 	if (!stp_online || !(stp_info.vbits & 0x4000))
 		return -ENODATA;
@@ -1649,7 +1667,9 @@ static ssize_t stp_time_zone_offset_show(struct sysdev_class *class, char *buf)
 static SYSDEV_CLASS_ATTR(time_zone_offset, 0400,
 			 stp_time_zone_offset_show, NULL);
 
-static ssize_t stp_timing_mode_show(struct sysdev_class *class, char *buf)
+static ssize_t stp_timing_mode_show(struct sysdev_class *class,
+				struct sysdev_class_attribute *attr,
+				char *buf)
 {
 	if (!stp_online)
 		return -ENODATA;
@@ -1658,7 +1678,9 @@ static ssize_t stp_timing_mode_show(struct sysdev_class *class, char *buf)
 
 static SYSDEV_CLASS_ATTR(timing_mode, 0400, stp_timing_mode_show, NULL);
 
-static ssize_t stp_timing_state_show(struct sysdev_class *class, char *buf)
+static ssize_t stp_timing_state_show(struct sysdev_class *class,
+				struct sysdev_class_attribute *attr,
+				char *buf)
 {
 	if (!stp_online)
 		return -ENODATA;
@@ -1667,12 +1689,15 @@ static ssize_t stp_timing_state_show(struct sysdev_class *class, char *buf)
 
 static SYSDEV_CLASS_ATTR(timing_state, 0400, stp_timing_state_show, NULL);
 
-static ssize_t stp_online_show(struct sysdev_class *class, char *buf)
+static ssize_t stp_online_show(struct sysdev_class *class,
+				struct sysdev_class_attribute *attr,
+				char *buf)
 {
 	return sprintf(buf, "%i\n", stp_online);
 }
 
 static ssize_t stp_online_store(struct sysdev_class *class,
+				struct sysdev_class_attribute *attr,
 				const char *buf, size_t count)
 {
 	unsigned int value;
diff --git a/arch/s390/lib/Makefile b/arch/s390/lib/Makefile
index cd54a1c352af..761ab8b56afc 100644
--- a/arch/s390/lib/Makefile
+++ b/arch/s390/lib/Makefile
@@ -2,7 +2,8 @@
 # Makefile for s390-specific library files..
 #
 
-lib-y += delay.o string.o uaccess_std.o uaccess_pt.o usercopy.o
+lib-y += delay.o string.o uaccess_std.o uaccess_pt.o
+obj-y += usercopy.o
 obj-$(CONFIG_32BIT) += div64.o qrnnd.o ucmpdi2.o
 lib-$(CONFIG_64BIT) += uaccess_mvcos.o
 lib-$(CONFIG_SMP) += spinlock.o
diff --git a/arch/s390/mm/cmm.c b/arch/s390/mm/cmm.c
index 76a3637b88e0..f16bd04e39e9 100644
--- a/arch/s390/mm/cmm.c
+++ b/arch/s390/mm/cmm.c
@@ -374,7 +374,7 @@ static struct ctl_table cmm_dir_table[] = {
 #ifdef CONFIG_CMM_IUCV
 #define SMSG_PREFIX "CMM"
 static void
-cmm_smsg_target(char *from, char *msg)
+cmm_smsg_target(const char *from, char *msg)
 {
 	long nr, seconds;
 
diff --git a/arch/score/include/asm/ptrace.h b/arch/score/include/asm/ptrace.h
index d40e691f23e2..e89dc9b1ef49 100644
--- a/arch/score/include/asm/ptrace.h
+++ b/arch/score/include/asm/ptrace.h
@@ -90,8 +90,7 @@ extern int read_tsk_short(struct task_struct *, unsigned long,
 			 unsigned short *);
 
 #define arch_has_single_step()	(1)
-extern void user_enable_single_step(struct task_struct *);
-extern void user_disable_single_step(struct task_struct *);
+
 #endif /* __KERNEL__ */
 
 #endif /* _ASM_SCORE_PTRACE_H */
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 05cef5061293..8d90564c2bcf 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -183,6 +183,9 @@ config DMA_COHERENT
 config DMA_NONCOHERENT
 	def_bool !DMA_COHERENT
 
+config NEED_DMA_MAP_STATE
+	def_bool DMA_NONCOHERENT
+
 source "init/Kconfig"
 
 source "kernel/Kconfig.freezer"
diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h
index 1042f7f0a48b..8bd952fcf3ba 100644
--- a/arch/sh/include/asm/pci.h
+++ b/arch/sh/include/asm/pci.h
@@ -83,25 +83,6 @@ static inline void pcibios_penalize_isa_irq(int irq, int active)
  */
 #define PCI_DMA_BUS_IS_PHYS	(dma_ops->is_phys)
 
-/* pci_unmap_{single,page} being a nop depends upon the
- * configuration.
- */
-#ifdef CONFIG_DMA_NONCOHERENT
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	dma_addr_t ADDR_NAME;
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		__u32 LEN_NAME;
-#define pci_unmap_addr(PTR, ADDR_NAME)		((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	(((PTR)->ADDR_NAME) = (VAL))
-#define pci_unmap_len(PTR, LEN_NAME)		((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	(((PTR)->LEN_NAME) = (VAL))
-#else
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
-#define pci_unmap_addr(PTR, ADDR_NAME)		(0)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	do { } while (0)
-#define pci_unmap_len(PTR, LEN_NAME)		(0)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0)
-#endif
-
 #ifdef CONFIG_PCI
 /*
  * None of the SH PCI controllers support MWI, it is always treated as a
diff --git a/arch/sh/include/asm/ptrace.h b/arch/sh/include/asm/ptrace.h
index e11b14ea2c43..2168fde25611 100644
--- a/arch/sh/include/asm/ptrace.h
+++ b/arch/sh/include/asm/ptrace.h
@@ -123,8 +123,6 @@ extern void show_regs(struct pt_regs *);
 struct task_struct;
 
 #define arch_has_single_step()	(1)
-extern void user_enable_single_step(struct task_struct *);
-extern void user_disable_single_step(struct task_struct *);
 
 struct perf_event;
 struct perf_sample_data;
diff --git a/arch/sh/include/asm/syscalls.h b/arch/sh/include/asm/syscalls.h
index c1e2b8deb837..507725af2e54 100644
--- a/arch/sh/include/asm/syscalls.h
+++ b/arch/sh/include/asm/syscalls.h
@@ -3,17 +3,12 @@
 
 #ifdef __KERNEL__
 
-struct old_utsname;
-
 asmlinkage int old_mmap(unsigned long addr, unsigned long len,
 			unsigned long prot, unsigned long flags,
 			int fd, unsigned long off);
 asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
 			  unsigned long prot, unsigned long flags,
 			  unsigned long fd, unsigned long pgoff);
-asmlinkage int sys_ipc(uint call, int first, int second,
-		       int third, void __user *ptr, long fifth);
-asmlinkage int sys_uname(struct old_utsname __user *name);
 
 #ifdef CONFIG_SUPERH32
 # include "syscalls_32.h"
diff --git a/arch/sh/include/asm/unistd_32.h b/arch/sh/include/asm/unistd_32.h
index 365744b05269..0e7f0fc8f086 100644
--- a/arch/sh/include/asm/unistd_32.h
+++ b/arch/sh/include/asm/unistd_32.h
@@ -358,6 +358,7 @@
 #define __ARCH_WANT_STAT64
 #define __ARCH_WANT_SYS_ALARM
 #define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_IPC
 #define __ARCH_WANT_SYS_PAUSE
 #define __ARCH_WANT_SYS_SGETMASK
 #define __ARCH_WANT_SYS_SIGNAL
@@ -370,6 +371,7 @@
 #define __ARCH_WANT_SYS_LLSEEK
 #define __ARCH_WANT_SYS_NICE
 #define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLD_UNAME
 #define __ARCH_WANT_SYS_OLDUMOUNT
 #define __ARCH_WANT_SYS_SIGPENDING
 #define __ARCH_WANT_SYS_SIGPROCMASK
diff --git a/arch/sh/include/asm/unistd_64.h b/arch/sh/include/asm/unistd_64.h
index 25de158aac3a..0580c33a1e04 100644
--- a/arch/sh/include/asm/unistd_64.h
+++ b/arch/sh/include/asm/unistd_64.h
@@ -398,6 +398,7 @@
 #define __ARCH_WANT_STAT64
 #define __ARCH_WANT_SYS_ALARM
 #define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_IPC
 #define __ARCH_WANT_SYS_PAUSE
 #define __ARCH_WANT_SYS_SGETMASK
 #define __ARCH_WANT_SYS_SIGNAL
@@ -410,6 +411,7 @@
 #define __ARCH_WANT_SYS_LLSEEK
 #define __ARCH_WANT_SYS_NICE
 #define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLD_UNAME
 #define __ARCH_WANT_SYS_OLDUMOUNT
 #define __ARCH_WANT_SYS_SIGPENDING
 #define __ARCH_WANT_SYS_SIGPROCMASK
diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c
index 83da5debeedf..e9fa1bfed53e 100644
--- a/arch/sh/kernel/cpu/clock.c
+++ b/arch/sh/kernel/cpu/clock.c
@@ -404,7 +404,7 @@ EXPORT_SYMBOL_GPL(clk_round_rate);
  *  If an entry has a device ID, it must match
  *  If an entry has a connection ID, it must match
  * Then we take the most specific entry - with the following
- * order of precidence: dev+con > dev only > con only.
+ * order of precedence: dev+con > dev only > con only.
  */
 static struct clk *clk_find(const char *dev_id, const char *con_id)
 {
diff --git a/arch/sh/kernel/cpu/sh4/sq.c b/arch/sh/kernel/cpu/sh4/sq.c
index fc065f9da6e5..14726eef1ce0 100644
--- a/arch/sh/kernel/cpu/sh4/sq.c
+++ b/arch/sh/kernel/cpu/sh4/sq.c
@@ -326,7 +326,7 @@ static struct attribute *sq_sysfs_attrs[] = {
 	NULL,
 };
 
-static struct sysfs_ops sq_sysfs_ops = {
+static const struct sysfs_ops sq_sysfs_ops = {
 	.show	= sq_sysfs_show,
 	.store	= sq_sysfs_store,
 };
diff --git a/arch/sh/kernel/perf_event.c b/arch/sh/kernel/perf_event.c
index 7ff0943e7a08..9f253e9cce01 100644
--- a/arch/sh/kernel/perf_event.c
+++ b/arch/sh/kernel/perf_event.c
@@ -275,13 +275,30 @@ const struct pmu *hw_perf_event_init(struct perf_event *event)
 	return &pmu;
 }
 
-void hw_perf_event_setup(int cpu)
+static void sh_pmu_setup(int cpu)
 {
 	struct cpu_hw_events *cpuhw = &per_cpu(cpu_hw_events, cpu);
 
 	memset(cpuhw, 0, sizeof(struct cpu_hw_events));
 }
 
+static int __cpuinit
+sh_pmu_notifier(struct notifier_block *self, unsigned long action, void *hcpu)
+{
+	unsigned int cpu = (long)hcpu;
+
+	switch (action & ~CPU_TASKS_FROZEN) {
+	case CPU_UP_PREPARE:
+		sh_pmu_setup(cpu);
+		break;
+
+	default:
+		break;
+	}
+
+	return NOTIFY_OK;
+}
+
 void hw_perf_enable(void)
 {
 	if (!sh_pmu_initialized())
@@ -308,5 +325,6 @@ int register_sh_pmu(struct sh_pmu *pmu)
 
 	WARN_ON(pmu->num_events > MAX_HWEVENTS);
 
+	perf_cpu_notifier(sh_pmu_notifier);
 	return 0;
 }
diff --git a/arch/sh/kernel/sys_sh.c b/arch/sh/kernel/sys_sh.c
index 71399cde03b5..81f58371613d 100644
--- a/arch/sh/kernel/sys_sh.c
+++ b/arch/sh/kernel/sys_sh.c
@@ -53,110 +53,6 @@ asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
 	return sys_mmap_pgoff(addr, len, prot, flags, fd, pgoff);
 }
 
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly.
- */
-asmlinkage int sys_ipc(uint call, int first, int second,
-		       int third, void __user *ptr, long fifth)
-{
-	int version, ret;
-
-	version = call >> 16; /* hack for backward compatibility */
-	call &= 0xffff;
-
-	if (call <= SEMTIMEDOP)
-		switch (call) {
-		case SEMOP:
-			return sys_semtimedop(first,
-					      (struct sembuf __user *)ptr,
-					      second, NULL);
-		case SEMTIMEDOP:
-			return sys_semtimedop(first,
-				(struct sembuf __user *)ptr, second,
-			        (const struct timespec __user *)fifth);
-		case SEMGET:
-			return sys_semget (first, second, third);
-		case SEMCTL: {
-			union semun fourth;
-			if (!ptr)
-				return -EINVAL;
-			if (get_user(fourth.__pad, (void __user * __user *) ptr))
-				return -EFAULT;
-			return sys_semctl (first, second, third, fourth);
-			}
-		default:
-			return -EINVAL;
-		}
-
-	if (call <= MSGCTL)
-		switch (call) {
-		case MSGSND:
-			return sys_msgsnd (first, (struct msgbuf __user *) ptr,
-					  second, third);
-		case MSGRCV:
-			switch (version) {
-			case 0:
-			{
-				struct ipc_kludge tmp;
-
-				if (!ptr)
-					return -EINVAL;
-
-				if (copy_from_user(&tmp,
-					(struct ipc_kludge __user *) ptr,
-						   sizeof (tmp)))
-					return -EFAULT;
-
-				return sys_msgrcv (first, tmp.msgp, second,
-						   tmp.msgtyp, third);
-			}
-			default:
-				return sys_msgrcv (first,
-						   (struct msgbuf __user *) ptr,
-						   second, fifth, third);
-			}
-		case MSGGET:
-			return sys_msgget ((key_t) first, second);
-		case MSGCTL:
-			return sys_msgctl (first, second,
-					   (struct msqid_ds __user *) ptr);
-		default:
-			return -EINVAL;
-		}
-	if (call <= SHMCTL)
-		switch (call) {
-		case SHMAT:
-			switch (version) {
-			default: {
-				ulong raddr;
-				ret = do_shmat (first, (char __user *) ptr,
-						 second, &raddr);
-				if (ret)
-					return ret;
-				return put_user (raddr, (ulong __user *) third);
-			}
-			case 1:	/* iBCS2 emulator entry point */
-				if (!segment_eq(get_fs(), get_ds()))
-					return -EINVAL;
-				return do_shmat (first, (char __user *) ptr,
-						  second, (ulong *) third);
-			}
-		case SHMDT:
-			return sys_shmdt ((char __user *)ptr);
-		case SHMGET:
-			return sys_shmget (first, second, third);
-		case SHMCTL:
-			return sys_shmctl (first, second,
-					   (struct shmid_ds __user *) ptr);
-		default:
-			return -EINVAL;
-		}
-
-	return -EINVAL;
-}
-
 /* sys_cacheflush -- flush (part of) the processor cache.  */
 asmlinkage int sys_cacheflush(unsigned long addr, unsigned long len, int op)
 {
@@ -197,14 +93,3 @@ asmlinkage int sys_cacheflush(unsigned long addr, unsigned long len, int op)
 	up_read(&current->mm->mmap_sem);
 	return 0;
 }
-
-asmlinkage int sys_uname(struct old_utsname __user *name)
-{
-	int err;
-	if (!name)
-		return -EFAULT;
-	down_read(&uts_sem);
-	err = copy_to_user(name, utsname(), sizeof(*name));
-	up_read(&uts_sem);
-	return err?-EFAULT:0;
-}
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 4097f6a10860..6db513674050 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -127,6 +127,9 @@ config ZONE_DMA
 	bool
 	default y if SPARC32
 
+config NEED_DMA_MAP_STATE
+	def_bool y
+
 config GENERIC_ISA_DMA
 	bool
 	default y if SPARC32
diff --git a/arch/sparc/include/asm/compat.h b/arch/sparc/include/asm/compat.h
index 0e706257918f..5016f76ea98a 100644
--- a/arch/sparc/include/asm/compat.h
+++ b/arch/sparc/include/asm/compat.h
@@ -5,7 +5,8 @@
  */
 #include <linux/types.h>
 
-#define COMPAT_USER_HZ	100
+#define COMPAT_USER_HZ		100
+#define COMPAT_UTS_MACHINE	"sparc\0\0"
 
 typedef u32		compat_size_t;
 typedef s32		compat_ssize_t;
diff --git a/arch/sparc/include/asm/dma-mapping.h b/arch/sparc/include/asm/dma-mapping.h
index 5a8c308e2b5c..4b4a0c0b0ccd 100644
--- a/arch/sparc/include/asm/dma-mapping.h
+++ b/arch/sparc/include/asm/dma-mapping.h
@@ -8,7 +8,6 @@
 #define DMA_ERROR_CODE	(~(dma_addr_t)0x0)
 
 extern int dma_supported(struct device *dev, u64 mask);
-extern int dma_set_mask(struct device *dev, u64 dma_mask);
 
 #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
 #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
@@ -62,4 +61,17 @@ static inline int dma_get_cache_alignment(void)
 	return (1 << INTERNODE_CACHE_SHIFT);
 }
 
+static inline int dma_set_mask(struct device *dev, u64 mask)
+{
+#ifdef CONFIG_PCI
+	if (dev->bus == &pci_bus_type) {
+		if (!dev->dma_mask || !dma_supported(dev, mask))
+			return -EINVAL;
+		*dev->dma_mask = mask;
+		return 0;
+	}
+#endif
+	return -EINVAL;
+}
+
 #endif
diff --git a/arch/sparc/include/asm/fbio.h b/arch/sparc/include/asm/fbio.h
index b9215a0907d3..0a21da87f7d6 100644
--- a/arch/sparc/include/asm/fbio.h
+++ b/arch/sparc/include/asm/fbio.h
@@ -173,7 +173,7 @@ struct mdi_cfginfo {
 	int     mdi_ncluts;     /* Number of implemented CLUTs in this MDI */
         int     mdi_type;       /* FBTYPE name */
         int     mdi_height;     /* height */
-        int     mdi_width;      /* widht */
+        int     mdi_width;      /* width */
         int     mdi_size;       /* available ram */
         int     mdi_mode;       /* 8bpp, 16bpp or 32bpp */
         int     mdi_pixfreq;    /* pixel clock (from PROM) */
diff --git a/arch/sparc/include/asm/pci_32.h b/arch/sparc/include/asm/pci_32.h
index e769f668a4b5..332ac9ab36bc 100644
--- a/arch/sparc/include/asm/pci_32.h
+++ b/arch/sparc/include/asm/pci_32.h
@@ -32,20 +32,6 @@ static inline void pcibios_penalize_isa_irq(int irq, int active)
 
 struct pci_dev;
 
-/* pci_unmap_{single,page} is not a nop, thus... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
-	dma_addr_t ADDR_NAME;
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
-	__u32 LEN_NAME;
-#define pci_unmap_addr(PTR, ADDR_NAME)			\
-	((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
-	(((PTR)->ADDR_NAME) = (VAL))
-#define pci_unmap_len(PTR, LEN_NAME)			\
-	((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
-	(((PTR)->LEN_NAME) = (VAL))
-
 #ifdef CONFIG_PCI
 static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 					enum pci_dma_burst_strategy *strat,
diff --git a/arch/sparc/include/asm/pci_64.h b/arch/sparc/include/asm/pci_64.h
index b0576df6ec83..5312782f0b5e 100644
--- a/arch/sparc/include/asm/pci_64.h
+++ b/arch/sparc/include/asm/pci_64.h
@@ -32,20 +32,6 @@ static inline void pcibios_penalize_isa_irq(int irq, int active)
  */
 #define PCI_DMA_BUS_IS_PHYS	(0)
 
-/* pci_unmap_{single,page} is not a nop, thus... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
-	dma_addr_t ADDR_NAME;
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
-	__u32 LEN_NAME;
-#define pci_unmap_addr(PTR, ADDR_NAME)			\
-	((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
-	(((PTR)->ADDR_NAME) = (VAL))
-#define pci_unmap_len(PTR, LEN_NAME)			\
-	((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
-	(((PTR)->LEN_NAME) = (VAL))
-
 /* PCI IOMMU mapping bypass support. */
 
 /* PCI 64-bit addressing works for all slots on all controller
diff --git a/arch/sparc/include/asm/unistd.h b/arch/sparc/include/asm/unistd.h
index cb4b9bfd0d87..d0b3b01ac9d4 100644
--- a/arch/sparc/include/asm/unistd.h
+++ b/arch/sparc/include/asm/unistd.h
@@ -432,7 +432,9 @@
 #define __ARCH_WANT_SYS_SIGPENDING
 #define __ARCH_WANT_SYS_SIGPROCMASK
 #define __ARCH_WANT_SYS_RT_SIGSUSPEND
-#ifndef __32bit_syscall_numbers__
+#ifdef __32bit_syscall_numbers__
+#define __ARCH_WANT_SYS_IPC
+#else
 #define __ARCH_WANT_COMPAT_SYS_TIME
 #define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND
 #endif
diff --git a/arch/sparc/kernel/iommu.c b/arch/sparc/kernel/iommu.c
index 5fad94950e76..8414549c1834 100644
--- a/arch/sparc/kernel/iommu.c
+++ b/arch/sparc/kernel/iommu.c
@@ -862,13 +862,3 @@ int dma_supported(struct device *dev, u64 device_mask)
 	return 0;
 }
 EXPORT_SYMBOL(dma_supported);
-
-int dma_set_mask(struct device *dev, u64 dma_mask)
-{
-#ifdef CONFIG_PCI
-	if (dev->bus == &pci_bus_type)
-		return pci_set_dma_mask(to_pci_dev(dev), dma_mask);
-#endif
-	return -EINVAL;
-}
-EXPORT_SYMBOL(dma_set_mask);
diff --git a/arch/sparc/kernel/ioport.c b/arch/sparc/kernel/ioport.c
index 3c8c44f6a41c..84e5386714cd 100644
--- a/arch/sparc/kernel/ioport.c
+++ b/arch/sparc/kernel/ioport.c
@@ -676,17 +676,6 @@ int dma_supported(struct device *dev, u64 mask)
 }
 EXPORT_SYMBOL(dma_supported);
 
-int dma_set_mask(struct device *dev, u64 dma_mask)
-{
-#ifdef CONFIG_PCI
-	if (dev->bus == &pci_bus_type)
-		return pci_set_dma_mask(to_pci_dev(dev), dma_mask);
-#endif
-	return -EOPNOTSUPP;
-}
-EXPORT_SYMBOL(dma_set_mask);
-
-
 #ifdef CONFIG_PROC_FS
 
 static int sparc_io_proc_show(struct seq_file *m, void *v)
diff --git a/arch/sparc/kernel/perf_event.c b/arch/sparc/kernel/perf_event.c
index 9f2b2bac8b2b..68cb9b42088f 100644
--- a/arch/sparc/kernel/perf_event.c
+++ b/arch/sparc/kernel/perf_event.c
@@ -1189,7 +1189,7 @@ static int __kprobes perf_event_nmi_handler(struct notifier_block *self,
 
 	regs = args->regs;
 
-	data.addr = 0;
+	perf_sample_data_init(&data, 0);
 
 	cpuc = &__get_cpu_var(cpu_hw_events);
 
@@ -1353,7 +1353,7 @@ static void perf_callchain_user_32(struct pt_regs *regs,
 }
 
 /* Like powerpc we can't get PMU interrupts within the PMU handler,
- * so no need for seperate NMI and IRQ chains as on x86.
+ * so no need for separate NMI and IRQ chains as on x86.
  */
 static DEFINE_PER_CPU(struct perf_callchain_entry, callchain);
 
diff --git a/arch/sparc/kernel/sys_sparc_32.c b/arch/sparc/kernel/sys_sparc_32.c
index 3a82e65d8db2..ee995b7dae7e 100644
--- a/arch/sparc/kernel/sys_sparc_32.c
+++ b/arch/sparc/kernel/sys_sparc_32.c
@@ -98,119 +98,6 @@ out:
 	return error;
 }
 
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly.
- */
-
-asmlinkage int sys_ipc (uint call, int first, int second, int third, void __user *ptr, long fifth)
-{
-	int version, err;
-
-	version = call >> 16; /* hack for backward compatibility */
-	call &= 0xffff;
-
-	if (call <= SEMCTL)
-		switch (call) {
-		case SEMOP:
-			err = sys_semtimedop (first, (struct sembuf __user *)ptr, second, NULL);
-			goto out;
-		case SEMTIMEDOP:
-			err = sys_semtimedop (first, (struct sembuf __user *)ptr, second, (const struct timespec __user *) fifth);
-			goto out;
-		case SEMGET:
-			err = sys_semget (first, second, third);
-			goto out;
-		case SEMCTL: {
-			union semun fourth;
-			err = -EINVAL;
-			if (!ptr)
-				goto out;
-			err = -EFAULT;
-			if (get_user(fourth.__pad,
-				     (void __user * __user *)ptr))
-				goto out;
-			err = sys_semctl (first, second, third, fourth);
-			goto out;
-			}
-		default:
-			err = -ENOSYS;
-			goto out;
-		}
-	if (call <= MSGCTL) 
-		switch (call) {
-		case MSGSND:
-			err = sys_msgsnd (first, (struct msgbuf __user *) ptr, 
-					  second, third);
-			goto out;
-		case MSGRCV:
-			switch (version) {
-			case 0: {
-				struct ipc_kludge tmp;
-				err = -EINVAL;
-				if (!ptr)
-					goto out;
-				err = -EFAULT;
-				if (copy_from_user(&tmp, (struct ipc_kludge __user *) ptr, sizeof (tmp)))
-					goto out;
-				err = sys_msgrcv (first, tmp.msgp, second, tmp.msgtyp, third);
-				goto out;
-				}
-			case 1: default:
-				err = sys_msgrcv (first,
-						  (struct msgbuf __user *) ptr,
-						  second, fifth, third);
-				goto out;
-			}
-		case MSGGET:
-			err = sys_msgget ((key_t) first, second);
-			goto out;
-		case MSGCTL:
-			err = sys_msgctl (first, second, (struct msqid_ds __user *) ptr);
-			goto out;
-		default:
-			err = -ENOSYS;
-			goto out;
-		}
-	if (call <= SHMCTL) 
-		switch (call) {
-		case SHMAT:
-			switch (version) {
-			case 0: default: {
-				ulong raddr;
-				err = do_shmat (first, (char __user *) ptr, second, &raddr);
-				if (err)
-					goto out;
-				err = -EFAULT;
-				if (put_user (raddr, (ulong __user *) third))
-					goto out;
-				err = 0;
-				goto out;
-				}
-			case 1:	/* iBCS2 emulator entry point */
-				err = -EINVAL;
-				goto out;
-			}
-		case SHMDT: 
-			err = sys_shmdt ((char __user *)ptr);
-			goto out;
-		case SHMGET:
-			err = sys_shmget (first, second, third);
-			goto out;
-		case SHMCTL:
-			err = sys_shmctl (first, second, (struct shmid_ds __user *) ptr);
-			goto out;
-		default:
-			err = -ENOSYS;
-			goto out;
-		}
-	else
-		err = -ENOSYS;
-out:
-	return err;
-}
-
 int sparc_mmap_check(unsigned long addr, unsigned long len)
 {
 	if (ARCH_SUN4C &&
diff --git a/arch/sparc/kernel/sys_sparc_64.c b/arch/sparc/kernel/sys_sparc_64.c
index cb1bef6f14b7..3d435c42e6db 100644
--- a/arch/sparc/kernel/sys_sparc_64.c
+++ b/arch/sparc/kernel/sys_sparc_64.c
@@ -426,7 +426,7 @@ out:
  * This is really horribly ugly.
  */
 
-SYSCALL_DEFINE6(ipc, unsigned int, call, int, first, unsigned long, second,
+SYSCALL_DEFINE6(sparc_ipc, unsigned int, call, int, first, unsigned long, second,
 		unsigned long, third, void __user *, ptr, long, fifth)
 {
 	long err;
@@ -510,17 +510,6 @@ out:
 	return err;
 }
 
-SYSCALL_DEFINE1(sparc64_newuname, struct new_utsname __user *, name)
-{
-	int ret = sys_newuname(name);
-	
-	if (current->personality == PER_LINUX32 && !ret) {
-		ret = (copy_to_user(name->machine, "sparc\0\0", 8)
-		       ? -EFAULT : 0);
-	}
-	return ret;
-}
-
 SYSCALL_DEFINE1(sparc64_personality, unsigned long, personality)
 {
 	int ret;
diff --git a/arch/sparc/kernel/systbls.h b/arch/sparc/kernel/systbls.h
index 68312fe8da74..118759cd7342 100644
--- a/arch/sparc/kernel/systbls.h
+++ b/arch/sparc/kernel/systbls.h
@@ -6,15 +6,12 @@
 #include <asm/utrap.h>
 #include <asm/signal.h>
 
-struct new_utsname;
-
 extern asmlinkage unsigned long sys_getpagesize(void);
 extern asmlinkage long sparc_pipe(struct pt_regs *regs);
-extern asmlinkage long sys_ipc(unsigned int call, int first,
+extern asmlinkage long sys_sparc_ipc(unsigned int call, int first,
 			       unsigned long second,
 			       unsigned long third,
 			       void __user *ptr, long fifth);
-extern asmlinkage long sparc64_newuname(struct new_utsname __user *name);
 extern asmlinkage long sparc64_personality(unsigned long personality);
 extern asmlinkage long sys64_munmap(unsigned long addr, size_t len);
 extern asmlinkage unsigned long sys64_mremap(unsigned long addr,
diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S
index 17614251fb6d..9db058dd039e 100644
--- a/arch/sparc/kernel/systbls_64.S
+++ b/arch/sparc/kernel/systbls_64.S
@@ -55,7 +55,7 @@ sys_call_table32:
 /*170*/	.word sys32_lsetxattr, sys32_fsetxattr, sys_getxattr, sys_lgetxattr, compat_sys_getdents
 	.word sys_setsid, sys_fchdir, sys32_fgetxattr, sys_listxattr, sys_llistxattr
 /*180*/	.word sys32_flistxattr, sys_removexattr, sys_lremovexattr, compat_sys_sigpending, sys_ni_syscall
-	.word sys32_setpgid, sys32_fremovexattr, sys32_tkill, sys32_exit_group, sys_sparc64_newuname
+	.word sys32_setpgid, sys32_fremovexattr, sys32_tkill, sys32_exit_group, sys_newuname
 /*190*/	.word sys32_init_module, sys_sparc64_personality, sys_remap_file_pages, sys32_epoll_create, sys32_epoll_ctl
 	.word sys32_epoll_wait, sys32_ioprio_set, sys_getppid, sys32_sigaction, sys_sgetmask
 /*200*/	.word sys32_ssetmask, sys_sigsuspend, compat_sys_newlstat, sys_uselib, compat_sys_old_readdir
@@ -130,13 +130,13 @@ sys_call_table:
 /*170*/	.word sys_lsetxattr, sys_fsetxattr, sys_getxattr, sys_lgetxattr, sys_getdents
 	.word sys_setsid, sys_fchdir, sys_fgetxattr, sys_listxattr, sys_llistxattr
 /*180*/	.word sys_flistxattr, sys_removexattr, sys_lremovexattr, sys_nis_syscall, sys_ni_syscall
-	.word sys_setpgid, sys_fremovexattr, sys_tkill, sys_exit_group, sys_sparc64_newuname
+	.word sys_setpgid, sys_fremovexattr, sys_tkill, sys_exit_group, sys_newuname
 /*190*/	.word sys_init_module, sys_sparc64_personality, sys_remap_file_pages, sys_epoll_create, sys_epoll_ctl
 	.word sys_epoll_wait, sys_ioprio_set, sys_getppid, sys_nis_syscall, sys_sgetmask
 /*200*/	.word sys_ssetmask, sys_nis_syscall, sys_newlstat, sys_uselib, sys_nis_syscall
 	.word sys_readahead, sys_socketcall, sys_syslog, sys_lookup_dcookie, sys_fadvise64
 /*210*/	.word sys_fadvise64_64, sys_tgkill, sys_waitpid, sys_swapoff, sys_sysinfo
-	.word sys_ipc, sys_nis_syscall, sys_clone, sys_ioprio_get, sys_adjtimex
+	.word sys_sparc_ipc, sys_nis_syscall, sys_clone, sys_ioprio_get, sys_adjtimex
 /*220*/	.word sys_nis_syscall, sys_ni_syscall, sys_delete_module, sys_ni_syscall, sys_getpgid
 	.word sys_bdflush, sys_sysfs, sys_nis_syscall, sys_setfsuid, sys_setfsgid
 /*230*/	.word sys_select, sys_nis_syscall, sys_splice, sys_stime, sys_statfs64
diff --git a/arch/um/include/asm/dma-mapping.h b/arch/um/include/asm/dma-mapping.h
index 378de4bbf49f..b948c14a7867 100644
--- a/arch/um/include/asm/dma-mapping.h
+++ b/arch/um/include/asm/dma-mapping.h
@@ -104,14 +104,6 @@ dma_get_cache_alignment(void)
 }
 
 static inline void
-dma_sync_single_range(struct device *dev, dma_addr_t dma_handle,
-		      unsigned long offset, size_t size,
-		      enum dma_data_direction direction)
-{
-	BUG();
-}
-
-static inline void
 dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 	       enum dma_data_direction direction)
 {
diff --git a/arch/um/include/asm/ptrace-generic.h b/arch/um/include/asm/ptrace-generic.h
index 6c8899013c92..2cd899f75a3c 100644
--- a/arch/um/include/asm/ptrace-generic.h
+++ b/arch/um/include/asm/ptrace-generic.h
@@ -16,6 +16,8 @@ struct pt_regs {
 	struct uml_pt_regs regs;
 };
 
+#define arch_has_single_step()	(1)
+
 #define EMPTY_REGS { .regs = EMPTY_UML_PT_REGS }
 
 #define PT_REGS_IP(r) UPT_IP(&(r)->regs)
diff --git a/arch/um/kernel/ptrace.c b/arch/um/kernel/ptrace.c
index 8e3d69e4fcb5..484509948ee9 100644
--- a/arch/um/kernel/ptrace.c
+++ b/arch/um/kernel/ptrace.c
@@ -12,16 +12,25 @@
 #endif
 #include "skas_ptrace.h"
 
-static inline void set_singlestepping(struct task_struct *child, int on)
+
+
+void user_enable_single_step(struct task_struct *child)
 {
-	if (on)
-		child->ptrace |= PT_DTRACE;
-	else
-		child->ptrace &= ~PT_DTRACE;
+	child->ptrace |= PT_DTRACE;
 	child->thread.singlestep_syscall = 0;
 
 #ifdef SUBARCH_SET_SINGLESTEPPING
-	SUBARCH_SET_SINGLESTEPPING(child, on);
+	SUBARCH_SET_SINGLESTEPPING(child, 1);
+#endif
+}
+
+void user_disable_single_step(struct task_struct *child)
+{
+	child->ptrace &= ~PT_DTRACE;
+	child->thread.singlestep_syscall = 0;
+
+#ifdef SUBARCH_SET_SINGLESTEPPING
+	SUBARCH_SET_SINGLESTEPPING(child, 0);
 #endif
 }
 
@@ -30,7 +39,7 @@ static inline void set_singlestepping(struct task_struct *child, int on)
  */
 void ptrace_disable(struct task_struct *child)
 {
-	set_singlestepping(child,0);
+	user_disable_single_step(child);
 }
 
 extern int peek_user(struct task_struct * child, long addr, long data);
@@ -69,53 +78,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		ret = -EIO;
 		break;
 
-	/* continue and stop at next (return from) syscall */
-	case PTRACE_SYSCALL:
-	/* restart after signal. */
-	case PTRACE_CONT: {
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-
-		set_singlestepping(child, 0);
-		if (request == PTRACE_SYSCALL)
-			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		else clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		child->exit_code = data;
-		wake_up_process(child);
-		ret = 0;
-		break;
-	}
-
-/*
- * make the child exit.  Best I can do is send it a sigkill.
- * perhaps it should be put in the status that it wants to
- * exit.
- */
-	case PTRACE_KILL: {
-		ret = 0;
-		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
-			break;
-
-		set_singlestepping(child, 0);
-		child->exit_code = SIGKILL;
-		wake_up_process(child);
-		break;
-	}
-
-	case PTRACE_SINGLESTEP: {  /* set the trap flag. */
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		set_singlestepping(child, 1);
-		child->exit_code = data;
-		/* give it a chance to run. */
-		wake_up_process(child);
-		ret = 0;
-		break;
-	}
-
 #ifdef PTRACE_GETREGS
 	case PTRACE_GETREGS: { /* Get all gp regs from the child. */
 		if (!access_ok(VERIFY_WRITE, p, MAX_REG_OFFSET)) {
diff --git a/arch/um/kernel/syscall.c b/arch/um/kernel/syscall.c
index cccab850c27e..4393173923f5 100644
--- a/arch/um/kernel/syscall.c
+++ b/arch/um/kernel/syscall.c
@@ -51,51 +51,6 @@ long old_mmap(unsigned long addr, unsigned long len,
 	return err;
 }
 
-long sys_uname(struct old_utsname __user * name)
-{
-	long err;
-	if (!name)
-		return -EFAULT;
-	down_read(&uts_sem);
-	err = copy_to_user(name, utsname(), sizeof (*name));
-	up_read(&uts_sem);
-	return err?-EFAULT:0;
-}
-
-long sys_olduname(struct oldold_utsname __user * name)
-{
-	long error;
-
-	if (!name)
-		return -EFAULT;
-	if (!access_ok(VERIFY_WRITE,name,sizeof(struct oldold_utsname)))
-		return -EFAULT;
-
-	down_read(&uts_sem);
-
-	error = __copy_to_user(&name->sysname, &utsname()->sysname,
-			       __OLD_UTS_LEN);
-	error |= __put_user(0, name->sysname + __OLD_UTS_LEN);
-	error |= __copy_to_user(&name->nodename, &utsname()->nodename,
-				__OLD_UTS_LEN);
-	error |= __put_user(0, name->nodename + __OLD_UTS_LEN);
-	error |= __copy_to_user(&name->release, &utsname()->release,
-				__OLD_UTS_LEN);
-	error |= __put_user(0, name->release + __OLD_UTS_LEN);
-	error |= __copy_to_user(&name->version, &utsname()->version,
-				__OLD_UTS_LEN);
-	error |= __put_user(0, name->version + __OLD_UTS_LEN);
-	error |= __copy_to_user(&name->machine, &utsname()->machine,
-				__OLD_UTS_LEN);
-	error |= __put_user(0, name->machine + __OLD_UTS_LEN);
-
-	up_read(&uts_sem);
-
-	error = error ? -EFAULT : 0;
-
-	return error;
-}
-
 int kernel_execve(const char *filename, char *const argv[], char *const envp[])
 {
 	mm_segment_t fs;
diff --git a/arch/um/sys-i386/shared/sysdep/syscalls.h b/arch/um/sys-i386/shared/sysdep/syscalls.h
index e7787679e317..05cb796aecb5 100644
--- a/arch/um/sys-i386/shared/sysdep/syscalls.h
+++ b/arch/um/sys-i386/shared/sysdep/syscalls.h
@@ -13,8 +13,6 @@ typedef long syscall_handler_t(struct pt_regs);
  */
 extern syscall_handler_t sys_rt_sigaction;
 
-extern syscall_handler_t old_mmap_i386;
-
 extern syscall_handler_t *sys_call_table[];
 
 #define EXECUTE_SYSCALL(syscall, regs) \
diff --git a/arch/um/sys-i386/sys_call_table.S b/arch/um/sys-i386/sys_call_table.S
index c6260dd6ebb9..de274071455d 100644
--- a/arch/um/sys-i386/sys_call_table.S
+++ b/arch/um/sys-i386/sys_call_table.S
@@ -7,7 +7,7 @@
 #define sys_vm86old sys_ni_syscall
 #define sys_vm86 sys_ni_syscall
 
-#define old_mmap old_mmap_i386
+#define old_mmap sys_old_mmap
 
 #define ptregs_fork sys_fork
 #define ptregs_execve sys_execve
diff --git a/arch/um/sys-i386/syscalls.c b/arch/um/sys-i386/syscalls.c
index 857ca0b3bdef..70ca357393b8 100644
--- a/arch/um/sys-i386/syscalls.c
+++ b/arch/um/sys-i386/syscalls.c
@@ -12,57 +12,6 @@
 #include "asm/unistd.h"
 
 /*
- * Perform the select(nd, in, out, ex, tv) and mmap() system
- * calls. Linux/i386 didn't use to be able to handle more than
- * 4 system call parameters, so these system calls used a memory
- * block for parameter passing..
- */
-
-struct mmap_arg_struct {
-	unsigned long addr;
-	unsigned long len;
-	unsigned long prot;
-	unsigned long flags;
-	unsigned long fd;
-	unsigned long offset;
-};
-
-extern int old_mmap(unsigned long addr, unsigned long len,
-		    unsigned long prot, unsigned long flags,
-		    unsigned long fd, unsigned long offset);
-
-long old_mmap_i386(struct mmap_arg_struct __user *arg)
-{
-	struct mmap_arg_struct a;
-	int err = -EFAULT;
-
-	if (copy_from_user(&a, arg, sizeof(a)))
-		goto out;
-
-	err = old_mmap(a.addr, a.len, a.prot, a.flags, a.fd, a.offset);
- out:
-	return err;
-}
-
-struct sel_arg_struct {
-	unsigned long n;
-	fd_set __user *inp;
-	fd_set __user *outp;
-	fd_set __user *exp;
-	struct timeval __user *tvp;
-};
-
-long old_select(struct sel_arg_struct __user *arg)
-{
-	struct sel_arg_struct a;
-
-	if (copy_from_user(&a, arg, sizeof(a)))
-		return -EFAULT;
-	/* sys_select() does the appropriate kernel locking */
-	return sys_select(a.n, a.inp, a.outp, a.exp, a.tvp);
-}
-
-/*
  * The prototype on i386 is:
  *
  *     int clone(int flags, void * child_stack, int * parent_tidptr, struct user_desc * newtls, int * child_tidptr)
@@ -85,92 +34,6 @@ long sys_clone(unsigned long clone_flags, unsigned long newsp,
 	return ret;
 }
 
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly.
- */
-long sys_ipc (uint call, int first, int second,
-	     int third, void __user *ptr, long fifth)
-{
-	int version, ret;
-
-	version = call >> 16; /* hack for backward compatibility */
-	call &= 0xffff;
-
-	switch (call) {
-	case SEMOP:
-		return sys_semtimedop(first, (struct sembuf __user *) ptr,
-				      second, NULL);
-	case SEMTIMEDOP:
-		return sys_semtimedop(first, (struct sembuf __user *) ptr,
-				      second,
-				      (const struct timespec __user *) fifth);
-	case SEMGET:
-		return sys_semget (first, second, third);
-	case SEMCTL: {
-		union semun fourth;
-		if (!ptr)
-			return -EINVAL;
-		if (get_user(fourth.__pad, (void __user * __user *) ptr))
-			return -EFAULT;
-		return sys_semctl (first, second, third, fourth);
-	}
-
-	case MSGSND:
-		return sys_msgsnd (first, (struct msgbuf *) ptr,
-				   second, third);
-	case MSGRCV:
-		switch (version) {
-		case 0: {
-			struct ipc_kludge tmp;
-			if (!ptr)
-				return -EINVAL;
-
-			if (copy_from_user(&tmp,
-					   (struct ipc_kludge *) ptr,
-					   sizeof (tmp)))
-				return -EFAULT;
-			return sys_msgrcv (first, tmp.msgp, second,
-					   tmp.msgtyp, third);
-		}
-		default:
-		        panic("msgrcv with version != 0");
-			return sys_msgrcv (first,
-					   (struct msgbuf *) ptr,
-					   second, fifth, third);
-		}
-	case MSGGET:
-		return sys_msgget ((key_t) first, second);
-	case MSGCTL:
-		return sys_msgctl (first, second, (struct msqid_ds *) ptr);
-
-	case SHMAT:
-		switch (version) {
-		default: {
-			ulong raddr;
-			ret = do_shmat (first, (char *) ptr, second, &raddr);
-			if (ret)
-				return ret;
-			return put_user (raddr, (ulong *) third);
-		}
-		case 1:	/* iBCS2 emulator entry point */
-			if (!segment_eq(get_fs(), get_ds()))
-				return -EINVAL;
-			return do_shmat (first, (char *) ptr, second, (ulong *) third);
-		}
-	case SHMDT:
-		return sys_shmdt ((char *)ptr);
-	case SHMGET:
-		return sys_shmget (first, second, third);
-	case SHMCTL:
-		return sys_shmctl (first, second,
-				   (struct shmid_ds *) ptr);
-	default:
-		return -ENOSYS;
-	}
-}
-
 long sys_sigaction(int sig, const struct old_sigaction __user *act,
 			 struct old_sigaction __user *oact)
 {
diff --git a/arch/um/sys-x86_64/syscall_table.c b/arch/um/sys-x86_64/syscall_table.c
index dd21d69715e6..47d469e7e7ce 100644
--- a/arch/um/sys-x86_64/syscall_table.c
+++ b/arch/um/sys-x86_64/syscall_table.c
@@ -26,11 +26,6 @@
 
 /* On UML we call it this way ("old" means it's not mmap2) */
 #define sys_mmap old_mmap
-/*
- * On x86-64 sys_uname is actually sys_newuname plus a compatibility trick.
- * See arch/x86_64/kernel/sys_x86_64.c
- */
-#define sys_uname sys_uname64
 
 #define stub_clone sys_clone
 #define stub_fork sys_fork
diff --git a/arch/um/sys-x86_64/syscalls.c b/arch/um/sys-x86_64/syscalls.c
index f1199fd34d38..f3d82bb6e15a 100644
--- a/arch/um/sys-x86_64/syscalls.c
+++ b/arch/um/sys-x86_64/syscalls.c
@@ -12,20 +12,6 @@
 #include "asm/uaccess.h"
 #include "os.h"
 
-asmlinkage long sys_uname64(struct new_utsname __user * name)
-{
-	int err;
-
-	down_read(&uts_sem);
-	err = copy_to_user(name, utsname(), sizeof (*name));
-	up_read(&uts_sem);
-
-	if (personality(current->personality) == PER_LINUX32)
-		err |= copy_to_user(&name->machine, "i686", 5);
-
-	return err ? -EFAULT : 0;
-}
-
 long arch_prctl(struct task_struct *task, int code, unsigned long __user *addr)
 {
 	unsigned long *ptr = addr, tmp;
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index e98440371525..0eacb1ffb421 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -102,6 +102,9 @@ config ZONE_DMA
 config SBUS
 	bool
 
+config NEED_DMA_MAP_STATE
+       def_bool (X86_64 || DMAR || DMA_API_DEBUG)
+
 config GENERIC_ISA_DMA
 	def_bool y
 
@@ -659,7 +662,7 @@ config GART_IOMMU
 	bool "GART IOMMU support" if EMBEDDED
 	default y
 	select SWIOTLB
-	depends on X86_64 && PCI
+	depends on X86_64 && PCI && K8_NB
 	---help---
 	  Support for full DMA access of devices with 32bit memory access only
 	  on systems with more than 3GB. This is usually needed for USB,
@@ -2058,7 +2061,7 @@ endif # X86_32
 
 config K8_NB
 	def_bool y
-	depends on AGP_AMD64 || (X86_64 && (GART_IOMMU || (PCI && NUMA)))
+	depends on CPU_SUP_AMD && PCI
 
 source "drivers/pcmcia/Kconfig"
 
diff --git a/arch/x86/crypto/twofish-i586-asm_32.S b/arch/x86/crypto/twofish-i586-asm_32.S
index 39b98ed2c1b9..575331cb2a8a 100644
--- a/arch/x86/crypto/twofish-i586-asm_32.S
+++ b/arch/x86/crypto/twofish-i586-asm_32.S
@@ -22,7 +22,7 @@
 
 #include <asm/asm-offsets.h>
 
-/* return adress at 0 */
+/* return address at 0 */
 
 #define in_blk    12  /* input byte array address parameter*/
 #define out_blk   8  /* output byte array address parameter*/
@@ -230,8 +230,8 @@ twofish_enc_blk:
 	push    %edi
 
 	mov	tfm + 16(%esp),	%ebp	/* abuse the base pointer: set new base bointer to the crypto tfm */
-	add	$crypto_tfm_ctx_offset, %ebp	/* ctx adress */
-	mov     in_blk+16(%esp),%edi	/* input adress in edi */
+	add	$crypto_tfm_ctx_offset, %ebp	/* ctx address */
+	mov     in_blk+16(%esp),%edi	/* input address in edi */
 
 	mov	(%edi),		%eax
 	mov	b_offset(%edi),	%ebx
@@ -286,8 +286,8 @@ twofish_dec_blk:
 
 
 	mov	tfm + 16(%esp),	%ebp	/* abuse the base pointer: set new base bointer to the crypto tfm */
-	add	$crypto_tfm_ctx_offset, %ebp	/* ctx adress */
-	mov     in_blk+16(%esp),%edi	/* input adress in edi */
+	add	$crypto_tfm_ctx_offset, %ebp	/* ctx address */
+	mov     in_blk+16(%esp),%edi	/* input address in edi */
 
 	mov	(%edi),		%eax
 	mov	b_offset(%edi),	%ebx
diff --git a/arch/x86/crypto/twofish-x86_64-asm_64.S b/arch/x86/crypto/twofish-x86_64-asm_64.S
index 35974a586615..573aa102542e 100644
--- a/arch/x86/crypto/twofish-x86_64-asm_64.S
+++ b/arch/x86/crypto/twofish-x86_64-asm_64.S
@@ -221,11 +221,11 @@
 twofish_enc_blk:
 	pushq    R1
 
-	/* %rdi contains the crypto tfm adress */
-	/* %rsi contains the output adress */
-	/* %rdx contains the input adress */
-	add	$crypto_tfm_ctx_offset, %rdi	/* set ctx adress */
-	/* ctx adress is moved to free one non-rex register
+	/* %rdi contains the crypto tfm address */
+	/* %rsi contains the output address */
+	/* %rdx contains the input address */
+	add	$crypto_tfm_ctx_offset, %rdi	/* set ctx address */
+	/* ctx address is moved to free one non-rex register
 	as target for the 8bit high operations */
 	mov	%rdi,		%r11
 
@@ -274,11 +274,11 @@ twofish_enc_blk:
 twofish_dec_blk:
 	pushq    R1
 
-	/* %rdi contains the crypto tfm adress */
-	/* %rsi contains the output adress */
-	/* %rdx contains the input adress */
-	add	$crypto_tfm_ctx_offset, %rdi	/* set ctx adress */
-	/* ctx adress is moved to free one non-rex register
+	/* %rdi contains the crypto tfm address */
+	/* %rsi contains the output address */
+	/* %rdx contains the input address */
+	add	$crypto_tfm_ctx_offset, %rdi	/* set ctx address */
+	/* ctx address is moved to free one non-rex register
 	as target for the 8bit high operations */
 	mov	%rdi,		%r11
 
diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index 53147ad85b96..59b4556a5b92 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -563,7 +563,7 @@ ia32_sys_call_table:
 	.quad quiet_ni_syscall			/* old mpx syscall holder */
 	.quad sys_setpgid
 	.quad quiet_ni_syscall			/* old ulimit syscall holder */
-	.quad sys32_olduname
+	.quad sys_olduname
 	.quad sys_umask		/* 60 */
 	.quad sys_chroot
 	.quad compat_sys_ustat
@@ -586,7 +586,7 @@ ia32_sys_call_table:
 	.quad compat_sys_settimeofday
 	.quad sys_getgroups16	/* 80 */
 	.quad sys_setgroups16
-	.quad sys32_old_select
+	.quad compat_sys_old_select
 	.quad sys_symlink
 	.quad sys_lstat
 	.quad sys_readlink		/* 85 */
@@ -613,7 +613,7 @@ ia32_sys_call_table:
 	.quad compat_sys_newstat
 	.quad compat_sys_newlstat
 	.quad compat_sys_newfstat
-	.quad sys32_uname
+	.quad sys_uname
 	.quad stub32_iopl		/* 110 */
 	.quad sys_vhangup
 	.quad quiet_ni_syscall	/* old "idle" system call */
diff --git a/arch/x86/ia32/sys_ia32.c b/arch/x86/ia32/sys_ia32.c
index 422572c77923..74c35431b7d8 100644
--- a/arch/x86/ia32/sys_ia32.c
+++ b/arch/x86/ia32/sys_ia32.c
@@ -143,7 +143,7 @@ asmlinkage long sys32_fstatat(unsigned int dfd, char __user *filename,
  * block for parameter passing..
  */
 
-struct mmap_arg_struct {
+struct mmap_arg_struct32 {
 	unsigned int addr;
 	unsigned int len;
 	unsigned int prot;
@@ -152,9 +152,9 @@ struct mmap_arg_struct {
 	unsigned int offset;
 };
 
-asmlinkage long sys32_mmap(struct mmap_arg_struct __user *arg)
+asmlinkage long sys32_mmap(struct mmap_arg_struct32 __user *arg)
 {
-	struct mmap_arg_struct a;
+	struct mmap_arg_struct32 a;
 
 	if (copy_from_user(&a, arg, sizeof(a)))
 		return -EFAULT;
@@ -332,24 +332,6 @@ asmlinkage long sys32_alarm(unsigned int seconds)
 	return alarm_setitimer(seconds);
 }
 
-struct sel_arg_struct {
-	unsigned int n;
-	unsigned int inp;
-	unsigned int outp;
-	unsigned int exp;
-	unsigned int tvp;
-};
-
-asmlinkage long sys32_old_select(struct sel_arg_struct __user *arg)
-{
-	struct sel_arg_struct a;
-
-	if (copy_from_user(&a, arg, sizeof(a)))
-		return -EFAULT;
-	return compat_sys_select(a.n, compat_ptr(a.inp), compat_ptr(a.outp),
-				 compat_ptr(a.exp), compat_ptr(a.tvp));
-}
-
 asmlinkage long sys32_waitpid(compat_pid_t pid, unsigned int *stat_addr,
 			      int options)
 {
@@ -466,58 +448,6 @@ asmlinkage long sys32_sendfile(int out_fd, int in_fd,
 	return ret;
 }
 
-asmlinkage long sys32_olduname(struct oldold_utsname __user *name)
-{
-	char *arch = "x86_64";
-	int err;
-
-	if (!name)
-		return -EFAULT;
-	if (!access_ok(VERIFY_WRITE, name, sizeof(struct oldold_utsname)))
-		return -EFAULT;
-
-	down_read(&uts_sem);
-
-	err = __copy_to_user(&name->sysname, &utsname()->sysname,
-			     __OLD_UTS_LEN);
-	err |= __put_user(0, name->sysname+__OLD_UTS_LEN);
-	err |= __copy_to_user(&name->nodename, &utsname()->nodename,
-			      __OLD_UTS_LEN);
-	err |= __put_user(0, name->nodename+__OLD_UTS_LEN);
-	err |= __copy_to_user(&name->release, &utsname()->release,
-			      __OLD_UTS_LEN);
-	err |= __put_user(0, name->release+__OLD_UTS_LEN);
-	err |= __copy_to_user(&name->version, &utsname()->version,
-			      __OLD_UTS_LEN);
-	err |= __put_user(0, name->version+__OLD_UTS_LEN);
-
-	if (personality(current->personality) == PER_LINUX32)
-		arch = "i686";
-
-	err |= __copy_to_user(&name->machine, arch, strlen(arch) + 1);
-
-	up_read(&uts_sem);
-
-	err = err ? -EFAULT : 0;
-
-	return err;
-}
-
-long sys32_uname(struct old_utsname __user *name)
-{
-	int err;
-
-	if (!name)
-		return -EFAULT;
-	down_read(&uts_sem);
-	err = copy_to_user(name, utsname(), sizeof(*name));
-	up_read(&uts_sem);
-	if (personality(current->personality) == PER_LINUX32)
-		err |= copy_to_user(&name->machine, "i686", 5);
-
-	return err ? -EFAULT : 0;
-}
-
 asmlinkage long sys32_execve(char __user *name, compat_uptr_t __user *argv,
 			     compat_uptr_t __user *envp, struct pt_regs *regs)
 {
diff --git a/arch/x86/include/asm/compat.h b/arch/x86/include/asm/compat.h
index 9a9c7bdc923d..306160e58b48 100644
--- a/arch/x86/include/asm/compat.h
+++ b/arch/x86/include/asm/compat.h
@@ -8,7 +8,8 @@
 #include <linux/sched.h>
 #include <asm/user32.h>
 
-#define COMPAT_USER_HZ	100
+#define COMPAT_USER_HZ		100
+#define COMPAT_UTS_MACHINE	"i686\0\0"
 
 typedef u32		compat_size_t;
 typedef s32		compat_ssize_t;
diff --git a/arch/x86/include/asm/hw_breakpoint.h b/arch/x86/include/asm/hw_breakpoint.h
index 0675a7c4c20e..2a1bd8f4f23a 100644
--- a/arch/x86/include/asm/hw_breakpoint.h
+++ b/arch/x86/include/asm/hw_breakpoint.h
@@ -10,7 +10,6 @@
  * (display/resolving)
  */
 struct arch_hw_breakpoint {
-	char		*name; /* Contains name of the symbol to set bkpt */
 	unsigned long	address;
 	u8		len;
 	u8		type;
diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index 3e002ca5a287..404a880ea325 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -97,34 +97,6 @@ extern void pci_iommu_alloc(void);
 
 #define PCI_DMA_BUS_IS_PHYS (dma_ops->is_phys)
 
-#if defined(CONFIG_X86_64) || defined(CONFIG_DMAR) || defined(CONFIG_DMA_API_DEBUG)
-
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)       \
-	        dma_addr_t ADDR_NAME;
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)         \
-	        __u32 LEN_NAME;
-#define pci_unmap_addr(PTR, ADDR_NAME)                  \
-	        ((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)         \
-	        (((PTR)->ADDR_NAME) = (VAL))
-#define pci_unmap_len(PTR, LEN_NAME)                    \
-	        ((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)           \
-	        (((PTR)->LEN_NAME) = (VAL))
-
-#else
-
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)       dma_addr_t ADDR_NAME[0];
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) unsigned LEN_NAME[0];
-#define pci_unmap_addr(PTR, ADDR_NAME)  sizeof((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \
-	        do { break; } while (pci_unmap_addr(PTR, ADDR_NAME))
-#define pci_unmap_len(PTR, LEN_NAME)            sizeof((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \
-	        do { break; } while (pci_unmap_len(PTR, LEN_NAME))
-
-#endif
-
 #endif  /* __KERNEL__ */
 
 #ifdef CONFIG_X86_64
diff --git a/arch/x86/include/asm/perf_event.h b/arch/x86/include/asm/perf_event.h
index befd172c82ad..db6109a885a7 100644
--- a/arch/x86/include/asm/perf_event.h
+++ b/arch/x86/include/asm/perf_event.h
@@ -18,7 +18,7 @@
 #define MSR_ARCH_PERFMON_EVENTSEL0			     0x186
 #define MSR_ARCH_PERFMON_EVENTSEL1			     0x187
 
-#define ARCH_PERFMON_EVENTSEL0_ENABLE			  (1 << 22)
+#define ARCH_PERFMON_EVENTSEL_ENABLE			  (1 << 22)
 #define ARCH_PERFMON_EVENTSEL_ANY			  (1 << 21)
 #define ARCH_PERFMON_EVENTSEL_INT			  (1 << 20)
 #define ARCH_PERFMON_EVENTSEL_OS			  (1 << 17)
@@ -50,7 +50,7 @@
 	 INTEL_ARCH_INV_MASK| \
 	 INTEL_ARCH_EDGE_MASK|\
 	 INTEL_ARCH_UNIT_MASK|\
-	 INTEL_ARCH_EVTSEL_MASK)
+	 INTEL_ARCH_EVENT_MASK)
 
 #define ARCH_PERFMON_UNHALTED_CORE_CYCLES_SEL		      0x3c
 #define ARCH_PERFMON_UNHALTED_CORE_CYCLES_UMASK		(0x00 << 8)
@@ -117,6 +117,18 @@ union cpuid10_edx {
  */
 #define X86_PMC_IDX_FIXED_BTS				(X86_PMC_IDX_FIXED + 16)
 
+/* IbsFetchCtl bits/masks */
+#define IBS_FETCH_RAND_EN		(1ULL<<57)
+#define IBS_FETCH_VAL			(1ULL<<49)
+#define IBS_FETCH_ENABLE		(1ULL<<48)
+#define IBS_FETCH_CNT			0xFFFF0000ULL
+#define IBS_FETCH_MAX_CNT		0x0000FFFFULL
+
+/* IbsOpCtl bits */
+#define IBS_OP_CNT_CTL			(1ULL<<19)
+#define IBS_OP_VAL			(1ULL<<18)
+#define IBS_OP_ENABLE			(1ULL<<17)
+#define IBS_OP_MAX_CNT			0x0000FFFFULL
 
 #ifdef CONFIG_PERF_EVENTS
 extern void init_hw_perf_events(void);
diff --git a/arch/x86/include/asm/ptrace.h b/arch/x86/include/asm/ptrace.h
index 20102808b191..69a686a7dff0 100644
--- a/arch/x86/include/asm/ptrace.h
+++ b/arch/x86/include/asm/ptrace.h
@@ -274,14 +274,7 @@ static inline unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs,
 		return 0;
 }
 
-/*
- * These are defined as per linux/ptrace.h, which see.
- */
 #define arch_has_single_step()	(1)
-extern void user_enable_single_step(struct task_struct *);
-extern void user_disable_single_step(struct task_struct *);
-
-extern void user_enable_block_step(struct task_struct *);
 #ifdef CONFIG_X86_DEBUGCTLMSR
 #define arch_has_block_step()	(1)
 #else
diff --git a/arch/x86/include/asm/sys_ia32.h b/arch/x86/include/asm/sys_ia32.h
index d5f69045c100..3ad421784ae7 100644
--- a/arch/x86/include/asm/sys_ia32.h
+++ b/arch/x86/include/asm/sys_ia32.h
@@ -26,8 +26,8 @@ asmlinkage long sys32_lstat64(char __user *, struct stat64 __user *);
 asmlinkage long sys32_fstat64(unsigned int, struct stat64 __user *);
 asmlinkage long sys32_fstatat(unsigned int, char __user *,
 			      struct stat64 __user *, int);
-struct mmap_arg_struct;
-asmlinkage long sys32_mmap(struct mmap_arg_struct __user *);
+struct mmap_arg_struct32;
+asmlinkage long sys32_mmap(struct mmap_arg_struct32 __user *);
 asmlinkage long sys32_mprotect(unsigned long, size_t, unsigned long);
 
 struct sigaction32;
@@ -40,8 +40,6 @@ asmlinkage long sys32_rt_sigprocmask(int, compat_sigset_t __user *,
 				     compat_sigset_t __user *, unsigned int);
 asmlinkage long sys32_alarm(unsigned int);
 
-struct sel_arg_struct;
-asmlinkage long sys32_old_select(struct sel_arg_struct __user *);
 asmlinkage long sys32_waitpid(compat_pid_t, unsigned int *, int);
 asmlinkage long sys32_sysfs(int, u32, u32);
 
@@ -56,11 +54,6 @@ asmlinkage long sys32_pwrite(unsigned int, char __user *, u32, u32, u32);
 asmlinkage long sys32_personality(unsigned long);
 asmlinkage long sys32_sendfile(int, int, compat_off_t __user *, s32);
 
-struct oldold_utsname;
-struct old_utsname;
-asmlinkage long sys32_olduname(struct oldold_utsname __user *);
-long sys32_uname(struct old_utsname __user *);
-
 asmlinkage long sys32_execve(char __user *, compat_uptr_t __user *,
 			     compat_uptr_t __user *, struct pt_regs *);
 asmlinkage long sys32_clone(unsigned int, unsigned int, struct pt_regs *);
diff --git a/arch/x86/include/asm/syscalls.h b/arch/x86/include/asm/syscalls.h
index 8868b9420b0e..5c044b43e9a7 100644
--- a/arch/x86/include/asm/syscalls.h
+++ b/arch/x86/include/asm/syscalls.h
@@ -50,18 +50,6 @@ asmlinkage int sys_sigaction(int, const struct old_sigaction __user *,
 			     struct old_sigaction __user *);
 unsigned long sys_sigreturn(struct pt_regs *);
 
-/* kernel/sys_i386_32.c */
-struct mmap_arg_struct;
-struct sel_arg_struct;
-struct oldold_utsname;
-struct old_utsname;
-
-asmlinkage int old_mmap(struct mmap_arg_struct __user *);
-asmlinkage int old_select(struct sel_arg_struct __user *);
-asmlinkage int sys_ipc(uint, int, int, int, void __user *, long);
-asmlinkage int sys_uname(struct old_utsname __user *);
-asmlinkage int sys_olduname(struct oldold_utsname __user *);
-
 /* kernel/vm86_32.c */
 int sys_vm86old(struct vm86_struct __user *, struct pt_regs *);
 int sys_vm86(unsigned long, unsigned long, struct pt_regs *);
@@ -73,11 +61,8 @@ int sys_vm86(unsigned long, unsigned long, struct pt_regs *);
 long sys_arch_prctl(int, unsigned long);
 
 /* kernel/sys_x86_64.c */
-struct new_utsname;
-
 asmlinkage long sys_mmap(unsigned long, unsigned long, unsigned long,
 			 unsigned long, unsigned long, unsigned long);
-asmlinkage long sys_uname(struct new_utsname __user *);
 
 #endif /* CONFIG_X86_32 */
 #endif /* _ASM_X86_SYSCALLS_H */
diff --git a/arch/x86/include/asm/unistd_32.h b/arch/x86/include/asm/unistd_32.h
index 3baf379fa840..beb9b5f8f8a4 100644
--- a/arch/x86/include/asm/unistd_32.h
+++ b/arch/x86/include/asm/unistd_32.h
@@ -354,6 +354,7 @@
 #define __ARCH_WANT_STAT64
 #define __ARCH_WANT_SYS_ALARM
 #define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_IPC
 #define __ARCH_WANT_SYS_PAUSE
 #define __ARCH_WANT_SYS_SGETMASK
 #define __ARCH_WANT_SYS_SIGNAL
@@ -366,6 +367,9 @@
 #define __ARCH_WANT_SYS_LLSEEK
 #define __ARCH_WANT_SYS_NICE
 #define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLD_UNAME
+#define __ARCH_WANT_SYS_OLD_MMAP
+#define __ARCH_WANT_SYS_OLD_SELECT
 #define __ARCH_WANT_SYS_OLDUMOUNT
 #define __ARCH_WANT_SYS_SIGPENDING
 #define __ARCH_WANT_SYS_SIGPROCMASK
diff --git a/arch/x86/include/asm/unistd_64.h b/arch/x86/include/asm/unistd_64.h
index 4843f7ba754a..ff4307b0e81e 100644
--- a/arch/x86/include/asm/unistd_64.h
+++ b/arch/x86/include/asm/unistd_64.h
@@ -146,7 +146,7 @@ __SYSCALL(__NR_wait4, sys_wait4)
 #define __NR_kill				62
 __SYSCALL(__NR_kill, sys_kill)
 #define __NR_uname				63
-__SYSCALL(__NR_uname, sys_uname)
+__SYSCALL(__NR_uname, sys_newuname)
 
 #define __NR_semget				64
 __SYSCALL(__NR_semget, sys_semget)
@@ -680,6 +680,7 @@ __SYSCALL(__NR_recvmmsg, sys_recvmmsg)
 #define __ARCH_WANT_SYS_LLSEEK
 #define __ARCH_WANT_SYS_NICE
 #define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLD_UNAME
 #define __ARCH_WANT_SYS_OLDUMOUNT
 #define __ARCH_WANT_SYS_SIGPENDING
 #define __ARCH_WANT_SYS_SIGPROCMASK
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index a54d714545ff..0061ea263061 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -490,6 +490,7 @@ int acpi_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
  *  ACPI based hotplug support for CPU
  */
 #ifdef CONFIG_ACPI_HOTPLUG_CPU
+#include <acpi/processor.h>
 
 static void acpi_map_cpu2node(acpi_handle handle, int cpu, int physid)
 {
@@ -567,6 +568,8 @@ static int __cpuinit _acpi_map_lsapic(acpi_handle handle, int *pcpu)
 		goto free_new_map;
 	}
 
+	acpi_processor_set_pdc(handle);
+
 	cpu = cpumask_first(new_map);
 	acpi_map_cpu2node(handle, cpu, physid);
 
@@ -1293,23 +1296,6 @@ static int __init dmi_disable_acpi(const struct dmi_system_id *d)
 }
 
 /*
- * Limit ACPI to CPU enumeration for HT
- */
-static int __init force_acpi_ht(const struct dmi_system_id *d)
-{
-	if (!acpi_force) {
-		printk(KERN_NOTICE "%s detected: force use of acpi=ht\n",
-		       d->ident);
-		disable_acpi();
-		acpi_ht = 1;
-	} else {
-		printk(KERN_NOTICE
-		       "Warning: acpi=force overrules DMI blacklist: acpi=ht\n");
-	}
-	return 0;
-}
-
-/*
  * Force ignoring BIOS IRQ0 pin2 override
  */
 static int __init dmi_ignore_irq0_timer_override(const struct dmi_system_id *d)
@@ -1345,82 +1331,6 @@ static struct dmi_system_id __initdata acpi_dmi_table[] = {
 	 },
 
 	/*
-	 * Boxes that need acpi=ht
-	 */
-	{
-	 .callback = force_acpi_ht,
-	 .ident = "FSC Primergy T850",
-	 .matches = {
-		     DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
-		     DMI_MATCH(DMI_PRODUCT_NAME, "PRIMERGY T850"),
-		     },
-	 },
-	{
-	 .callback = force_acpi_ht,
-	 .ident = "HP VISUALIZE NT Workstation",
-	 .matches = {
-		     DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
-		     DMI_MATCH(DMI_PRODUCT_NAME, "HP VISUALIZE NT Workstation"),
-		     },
-	 },
-	{
-	 .callback = force_acpi_ht,
-	 .ident = "Compaq Workstation W8000",
-	 .matches = {
-		     DMI_MATCH(DMI_SYS_VENDOR, "Compaq"),
-		     DMI_MATCH(DMI_PRODUCT_NAME, "Workstation W8000"),
-		     },
-	 },
-	{
-	 .callback = force_acpi_ht,
-	 .ident = "ASUS CUR-DLS",
-	 .matches = {
-		     DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
-		     DMI_MATCH(DMI_BOARD_NAME, "CUR-DLS"),
-		     },
-	 },
-	{
-	 .callback = force_acpi_ht,
-	 .ident = "ABIT i440BX-W83977",
-	 .matches = {
-		     DMI_MATCH(DMI_BOARD_VENDOR, "ABIT <http://www.abit.com>"),
-		     DMI_MATCH(DMI_BOARD_NAME, "i440BX-W83977 (BP6)"),
-		     },
-	 },
-	{
-	 .callback = force_acpi_ht,
-	 .ident = "IBM Bladecenter",
-	 .matches = {
-		     DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
-		     DMI_MATCH(DMI_BOARD_NAME, "IBM eServer BladeCenter HS20"),
-		     },
-	 },
-	{
-	 .callback = force_acpi_ht,
-	 .ident = "IBM eServer xSeries 360",
-	 .matches = {
-		     DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
-		     DMI_MATCH(DMI_BOARD_NAME, "eServer xSeries 360"),
-		     },
-	 },
-	{
-	 .callback = force_acpi_ht,
-	 .ident = "IBM eserver xSeries 330",
-	 .matches = {
-		     DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
-		     DMI_MATCH(DMI_BOARD_NAME, "eserver xSeries 330"),
-		     },
-	 },
-	{
-	 .callback = force_acpi_ht,
-	 .ident = "IBM eserver xSeries 440",
-	 .matches = {
-		     DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
-		     DMI_MATCH(DMI_PRODUCT_NAME, "eserver xSeries 440"),
-		     },
-	 },
-
-	/*
 	 * Boxes that need ACPI PCI IRQ routing disabled
 	 */
 	{
@@ -1652,8 +1562,10 @@ static int __init parse_acpi(char *arg)
 	}
 	/* Limit ACPI just to boot-time to enable HT */
 	else if (strcmp(arg, "ht") == 0) {
-		if (!acpi_force)
+		if (!acpi_force) {
+			printk(KERN_WARNING "acpi=ht will be removed in Linux-2.6.35\n");
 			disable_acpi();
+		}
 		acpi_ht = 1;
 	}
 	/* acpi=rsdt use RSDT instead of XSDT */
diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c
index f147a95fd84a..3704997e8b25 100644
--- a/arch/x86/kernel/aperture_64.c
+++ b/arch/x86/kernel/aperture_64.c
@@ -31,7 +31,6 @@
 #include <asm/x86_init.h>
 
 int gart_iommu_aperture;
-EXPORT_SYMBOL_GPL(gart_iommu_aperture);
 int gart_iommu_aperture_disabled __initdata;
 int gart_iommu_aperture_allowed __initdata;
 
diff --git a/arch/x86/kernel/apic/apic_flat_64.c b/arch/x86/kernel/apic/apic_flat_64.c
index e3c3d820c325..09d3b17ce0c2 100644
--- a/arch/x86/kernel/apic/apic_flat_64.c
+++ b/arch/x86/kernel/apic/apic_flat_64.c
@@ -223,7 +223,7 @@ struct apic apic_flat =  {
 };
 
 /*
- * Physflat mode is used when there are more than 8 CPUs on a AMD system.
+ * Physflat mode is used when there are more than 8 CPUs on a system.
  * We cannot use logical delivery in this case because the mask
  * overflows, so use physical mode.
  */
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 3740c8a4eae7..49dbeaef2a27 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -120,11 +120,9 @@ EXPORT_SYMBOL_GPL(uv_possible_blades);
 unsigned long sn_rtc_cycles_per_second;
 EXPORT_SYMBOL(sn_rtc_cycles_per_second);
 
-/* Start with all IRQs pointing to boot CPU.  IRQ balancing will shift them. */
-
 static const struct cpumask *uv_target_cpus(void)
 {
-	return cpumask_of(0);
+	return cpu_online_mask;
 }
 
 static void uv_vector_allocation_domain(int cpu, struct cpumask *retmask)
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index 879666f4d871..7e1cca13af35 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -70,7 +70,8 @@ static void __cpuinit early_init_intel(struct cpuinfo_x86 *c)
 	if (c->x86_power & (1 << 8)) {
 		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
 		set_cpu_cap(c, X86_FEATURE_NONSTOP_TSC);
-		sched_clock_stable = 1;
+		if (!check_tsc_unstable())
+			sched_clock_stable = 1;
 	}
 
 	/*
diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c
index eddb1bdd1b8f..b3eeb66c0a51 100644
--- a/arch/x86/kernel/cpu/intel_cacheinfo.c
+++ b/arch/x86/kernel/cpu/intel_cacheinfo.c
@@ -903,7 +903,7 @@ static ssize_t store(struct kobject *kobj, struct attribute *attr,
 	return ret;
 }
 
-static struct sysfs_ops sysfs_ops = {
+static const struct sysfs_ops sysfs_ops = {
 	.show   = show,
 	.store  = store,
 };
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index a8aacd4b513c..3ab9c886b613 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -46,6 +46,13 @@
 
 #include "mce-internal.h"
 
+static DEFINE_MUTEX(mce_read_mutex);
+
+#define rcu_dereference_check_mce(p) \
+	rcu_dereference_check((p), \
+			      rcu_read_lock_sched_held() || \
+			      lockdep_is_held(&mce_read_mutex))
+
 #define CREATE_TRACE_POINTS
 #include <trace/events/mce.h>
 
@@ -158,7 +165,7 @@ void mce_log(struct mce *mce)
 	mce->finished = 0;
 	wmb();
 	for (;;) {
-		entry = rcu_dereference(mcelog.next);
+		entry = rcu_dereference_check_mce(mcelog.next);
 		for (;;) {
 			/*
 			 * When the buffer fills up discard new entries.
@@ -1485,8 +1492,6 @@ static void collect_tscs(void *data)
 	rdtscll(cpu_tsc[smp_processor_id()]);
 }
 
-static DEFINE_MUTEX(mce_read_mutex);
-
 static ssize_t mce_read(struct file *filp, char __user *ubuf, size_t usize,
 			loff_t *off)
 {
@@ -1500,7 +1505,7 @@ static ssize_t mce_read(struct file *filp, char __user *ubuf, size_t usize,
 		return -ENOMEM;
 
 	mutex_lock(&mce_read_mutex);
-	next = rcu_dereference(mcelog.next);
+	next = rcu_dereference_check_mce(mcelog.next);
 
 	/* Only supports full reads right now */
 	if (*off != 0 || usize < MCE_LOG_LEN*sizeof(struct mce)) {
@@ -1565,7 +1570,7 @@ timeout:
 static unsigned int mce_poll(struct file *file, poll_table *wait)
 {
 	poll_wait(file, &mce_wait, wait);
-	if (rcu_dereference(mcelog.next))
+	if (rcu_dereference_check_mce(mcelog.next))
 		return POLLIN | POLLRDNORM;
 	return 0;
 }
@@ -2044,6 +2049,7 @@ static __init void mce_init_banks(void)
 		struct mce_bank *b = &mce_banks[i];
 		struct sysdev_attribute *a = &b->attr;
 
+		sysfs_attr_init(&a->attr);
 		a->attr.name	= b->attrname;
 		snprintf(b->attrname, ATTR_LEN, "bank%d", i);
 
diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c
index 83a3d1f4efca..cda932ca3ade 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c
@@ -388,7 +388,7 @@ static ssize_t store(struct kobject *kobj, struct attribute *attr,
 	return ret;
 }
 
-static struct sysfs_ops threshold_ops = {
+static const struct sysfs_ops threshold_ops = {
 	.show			= show,
 	.store			= store,
 };
diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel.c b/arch/x86/kernel/cpu/mcheck/mce_intel.c
index 7c785634af2b..d15df6e49bf0 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_intel.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_intel.c
@@ -95,7 +95,7 @@ static void cmci_discover(int banks, int boot)
 
 		/* Already owned by someone else? */
 		if (val & CMCI_EN) {
-			if (test_and_clear_bit(i, owned) || boot)
+			if (test_and_clear_bit(i, owned) && !boot)
 				print_update("SHD", &hdr, i);
 			__clear_bit(i, __get_cpu_var(mce_poll_banks));
 			continue;
@@ -107,7 +107,7 @@ static void cmci_discover(int banks, int boot)
 
 		/* Did the enable bit stick? -- the bank supports CMCI */
 		if (val & CMCI_EN) {
-			if (!test_and_set_bit(i, owned) || boot)
+			if (!test_and_set_bit(i, owned) && !boot)
 				print_update("CMCI", &hdr, i);
 			__clear_bit(i, __get_cpu_var(mce_poll_banks));
 		} else {
diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c
index b1fbdeecf6c9..60398a0d947c 100644
--- a/arch/x86/kernel/cpu/perf_event.c
+++ b/arch/x86/kernel/cpu/perf_event.c
@@ -73,10 +73,10 @@ struct debug_store {
 struct event_constraint {
 	union {
 		unsigned long	idxmsk[BITS_TO_LONGS(X86_PMC_IDX_MAX)];
-		u64		idxmsk64[1];
+		u64		idxmsk64;
 	};
-	int	code;
-	int	cmask;
+	u64	code;
+	u64	cmask;
 	int	weight;
 };
 
@@ -103,7 +103,7 @@ struct cpu_hw_events {
 };
 
 #define __EVENT_CONSTRAINT(c, n, m, w) {\
-	{ .idxmsk64[0] = (n) },		\
+	{ .idxmsk64 = (n) },		\
 	.code = (c),			\
 	.cmask = (m),			\
 	.weight = (w),			\
@@ -116,7 +116,7 @@ struct cpu_hw_events {
 	EVENT_CONSTRAINT(c, n, INTEL_ARCH_EVTSEL_MASK)
 
 #define FIXED_EVENT_CONSTRAINT(c, n)	\
-	EVENT_CONSTRAINT(c, n, INTEL_ARCH_FIXED_MASK)
+	EVENT_CONSTRAINT(c, (1ULL << (32+n)), INTEL_ARCH_FIXED_MASK)
 
 #define EVENT_CONSTRAINT_END		\
 	EVENT_CONSTRAINT(0, 0, 0)
@@ -133,8 +133,8 @@ struct x86_pmu {
 	int		(*handle_irq)(struct pt_regs *);
 	void		(*disable_all)(void);
 	void		(*enable_all)(void);
-	void		(*enable)(struct hw_perf_event *, int);
-	void		(*disable)(struct hw_perf_event *, int);
+	void		(*enable)(struct perf_event *);
+	void		(*disable)(struct perf_event *);
 	unsigned	eventsel;
 	unsigned	perfctr;
 	u64		(*event_map)(int);
@@ -157,6 +157,11 @@ struct x86_pmu {
 	void		(*put_event_constraints)(struct cpu_hw_events *cpuc,
 						 struct perf_event *event);
 	struct event_constraint *event_constraints;
+
+	void		(*cpu_prepare)(int cpu);
+	void		(*cpu_starting)(int cpu);
+	void		(*cpu_dying)(int cpu);
+	void		(*cpu_dead)(int cpu);
 };
 
 static struct x86_pmu x86_pmu __read_mostly;
@@ -165,8 +170,7 @@ static DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events) = {
 	.enabled = 1,
 };
 
-static int x86_perf_event_set_period(struct perf_event *event,
-			     struct hw_perf_event *hwc, int idx);
+static int x86_perf_event_set_period(struct perf_event *event);
 
 /*
  * Generalized hw caching related hw_event table, filled
@@ -189,11 +193,12 @@ static u64 __read_mostly hw_cache_event_ids
  * Returns the delta events processed.
  */
 static u64
-x86_perf_event_update(struct perf_event *event,
-			struct hw_perf_event *hwc, int idx)
+x86_perf_event_update(struct perf_event *event)
 {
+	struct hw_perf_event *hwc = &event->hw;
 	int shift = 64 - x86_pmu.event_bits;
 	u64 prev_raw_count, new_raw_count;
+	int idx = hwc->idx;
 	s64 delta;
 
 	if (idx == X86_PMC_IDX_FIXED_BTS)
@@ -293,7 +298,7 @@ static inline bool bts_available(void)
 	return x86_pmu.enable_bts != NULL;
 }
 
-static inline void init_debug_store_on_cpu(int cpu)
+static void init_debug_store_on_cpu(int cpu)
 {
 	struct debug_store *ds = per_cpu(cpu_hw_events, cpu).ds;
 
@@ -305,7 +310,7 @@ static inline void init_debug_store_on_cpu(int cpu)
 		     (u32)((u64)(unsigned long)ds >> 32));
 }
 
-static inline void fini_debug_store_on_cpu(int cpu)
+static void fini_debug_store_on_cpu(int cpu)
 {
 	if (!per_cpu(cpu_hw_events, cpu).ds)
 		return;
@@ -503,6 +508,9 @@ static int __hw_perf_event_init(struct perf_event *event)
 	 */
 	if (attr->type == PERF_TYPE_RAW) {
 		hwc->config |= x86_pmu.raw_event(attr->config);
+		if ((hwc->config & ARCH_PERFMON_EVENTSEL_ANY) &&
+		    perf_paranoid_cpu() && !capable(CAP_SYS_ADMIN))
+			return -EACCES;
 		return 0;
 	}
 
@@ -553,9 +561,9 @@ static void x86_pmu_disable_all(void)
 		if (!test_bit(idx, cpuc->active_mask))
 			continue;
 		rdmsrl(x86_pmu.eventsel + idx, val);
-		if (!(val & ARCH_PERFMON_EVENTSEL0_ENABLE))
+		if (!(val & ARCH_PERFMON_EVENTSEL_ENABLE))
 			continue;
-		val &= ~ARCH_PERFMON_EVENTSEL0_ENABLE;
+		val &= ~ARCH_PERFMON_EVENTSEL_ENABLE;
 		wrmsrl(x86_pmu.eventsel + idx, val);
 	}
 }
@@ -590,7 +598,7 @@ static void x86_pmu_enable_all(void)
 			continue;
 
 		val = event->hw.config;
-		val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+		val |= ARCH_PERFMON_EVENTSEL_ENABLE;
 		wrmsrl(x86_pmu.eventsel + idx, val);
 	}
 }
@@ -612,8 +620,8 @@ static int x86_schedule_events(struct cpu_hw_events *cpuc, int n, int *assign)
 	bitmap_zero(used_mask, X86_PMC_IDX_MAX);
 
 	for (i = 0; i < n; i++) {
-		constraints[i] =
-		  x86_pmu.get_event_constraints(cpuc, cpuc->event_list[i]);
+		c = x86_pmu.get_event_constraints(cpuc, cpuc->event_list[i]);
+		constraints[i] = c;
 	}
 
 	/*
@@ -635,7 +643,7 @@ static int x86_schedule_events(struct cpu_hw_events *cpuc, int n, int *assign)
 		if (test_bit(hwc->idx, used_mask))
 			break;
 
-		set_bit(hwc->idx, used_mask);
+		__set_bit(hwc->idx, used_mask);
 		if (assign)
 			assign[i] = hwc->idx;
 	}
@@ -684,7 +692,7 @@ static int x86_schedule_events(struct cpu_hw_events *cpuc, int n, int *assign)
 			if (j == X86_PMC_IDX_MAX)
 				break;
 
-			set_bit(j, used_mask);
+			__set_bit(j, used_mask);
 
 			if (assign)
 				assign[i] = j;
@@ -777,6 +785,7 @@ static inline int match_prev_assignment(struct hw_perf_event *hwc,
 		hwc->last_tag == cpuc->tags[i];
 }
 
+static int x86_pmu_start(struct perf_event *event);
 static void x86_pmu_stop(struct perf_event *event);
 
 void hw_perf_enable(void)
@@ -793,6 +802,7 @@ void hw_perf_enable(void)
 		return;
 
 	if (cpuc->n_added) {
+		int n_running = cpuc->n_events - cpuc->n_added;
 		/*
 		 * apply assignment obtained either from
 		 * hw_perf_group_sched_in() or x86_pmu_enable()
@@ -800,8 +810,7 @@ void hw_perf_enable(void)
 		 * step1: save events moving to new counters
 		 * step2: reprogram moved events into new counters
 		 */
-		for (i = 0; i < cpuc->n_events; i++) {
-
+		for (i = 0; i < n_running; i++) {
 			event = cpuc->event_list[i];
 			hwc = &event->hw;
 
@@ -816,29 +825,18 @@ void hw_perf_enable(void)
 				continue;
 
 			x86_pmu_stop(event);
-
-			hwc->idx = -1;
 		}
 
 		for (i = 0; i < cpuc->n_events; i++) {
-
 			event = cpuc->event_list[i];
 			hwc = &event->hw;
 
-			if (hwc->idx == -1) {
+			if (!match_prev_assignment(hwc, cpuc, i))
 				x86_assign_hw_event(event, cpuc, i);
-				x86_perf_event_set_period(event, hwc, hwc->idx);
-			}
-			/*
-			 * need to mark as active because x86_pmu_disable()
-			 * clear active_mask and events[] yet it preserves
-			 * idx
-			 */
-			set_bit(hwc->idx, cpuc->active_mask);
-			cpuc->events[hwc->idx] = event;
+			else if (i < n_running)
+				continue;
 
-			x86_pmu.enable(hwc, hwc->idx);
-			perf_event_update_userpage(event);
+			x86_pmu_start(event);
 		}
 		cpuc->n_added = 0;
 		perf_events_lapic_init();
@@ -850,15 +848,16 @@ void hw_perf_enable(void)
 	x86_pmu.enable_all();
 }
 
-static inline void __x86_pmu_enable_event(struct hw_perf_event *hwc, int idx)
+static inline void __x86_pmu_enable_event(struct hw_perf_event *hwc)
 {
-	(void)checking_wrmsrl(hwc->config_base + idx,
-			      hwc->config | ARCH_PERFMON_EVENTSEL0_ENABLE);
+	(void)checking_wrmsrl(hwc->config_base + hwc->idx,
+			      hwc->config | ARCH_PERFMON_EVENTSEL_ENABLE);
 }
 
-static inline void x86_pmu_disable_event(struct hw_perf_event *hwc, int idx)
+static inline void x86_pmu_disable_event(struct perf_event *event)
 {
-	(void)checking_wrmsrl(hwc->config_base + idx, hwc->config);
+	struct hw_perf_event *hwc = &event->hw;
+	(void)checking_wrmsrl(hwc->config_base + hwc->idx, hwc->config);
 }
 
 static DEFINE_PER_CPU(u64 [X86_PMC_IDX_MAX], pmc_prev_left);
@@ -868,12 +867,12 @@ static DEFINE_PER_CPU(u64 [X86_PMC_IDX_MAX], pmc_prev_left);
  * To be called with the event disabled in hw:
  */
 static int
-x86_perf_event_set_period(struct perf_event *event,
-			     struct hw_perf_event *hwc, int idx)
+x86_perf_event_set_period(struct perf_event *event)
 {
+	struct hw_perf_event *hwc = &event->hw;
 	s64 left = atomic64_read(&hwc->period_left);
 	s64 period = hwc->sample_period;
-	int err, ret = 0;
+	int err, ret = 0, idx = hwc->idx;
 
 	if (idx == X86_PMC_IDX_FIXED_BTS)
 		return 0;
@@ -919,11 +918,11 @@ x86_perf_event_set_period(struct perf_event *event,
 	return ret;
 }
 
-static void x86_pmu_enable_event(struct hw_perf_event *hwc, int idx)
+static void x86_pmu_enable_event(struct perf_event *event)
 {
 	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
 	if (cpuc->enabled)
-		__x86_pmu_enable_event(hwc, idx);
+		__x86_pmu_enable_event(&event->hw);
 }
 
 /*
@@ -959,34 +958,32 @@ static int x86_pmu_enable(struct perf_event *event)
 	memcpy(cpuc->assign, assign, n*sizeof(int));
 
 	cpuc->n_events = n;
-	cpuc->n_added  = n - n0;
+	cpuc->n_added += n - n0;
 
 	return 0;
 }
 
 static int x86_pmu_start(struct perf_event *event)
 {
-	struct hw_perf_event *hwc = &event->hw;
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	int idx = event->hw.idx;
 
-	if (hwc->idx == -1)
+	if (idx == -1)
 		return -EAGAIN;
 
-	x86_perf_event_set_period(event, hwc, hwc->idx);
-	x86_pmu.enable(hwc, hwc->idx);
+	x86_perf_event_set_period(event);
+	cpuc->events[idx] = event;
+	__set_bit(idx, cpuc->active_mask);
+	x86_pmu.enable(event);
+	perf_event_update_userpage(event);
 
 	return 0;
 }
 
 static void x86_pmu_unthrottle(struct perf_event *event)
 {
-	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
-	struct hw_perf_event *hwc = &event->hw;
-
-	if (WARN_ON_ONCE(hwc->idx >= X86_PMC_IDX_MAX ||
-				cpuc->events[hwc->idx] != event))
-		return;
-
-	x86_pmu.enable(hwc, hwc->idx);
+	int ret = x86_pmu_start(event);
+	WARN_ON_ONCE(ret);
 }
 
 void perf_event_print_debug(void)
@@ -1046,18 +1043,16 @@ static void x86_pmu_stop(struct perf_event *event)
 	struct hw_perf_event *hwc = &event->hw;
 	int idx = hwc->idx;
 
-	/*
-	 * Must be done before we disable, otherwise the nmi handler
-	 * could reenable again:
-	 */
-	clear_bit(idx, cpuc->active_mask);
-	x86_pmu.disable(hwc, idx);
+	if (!__test_and_clear_bit(idx, cpuc->active_mask))
+		return;
+
+	x86_pmu.disable(event);
 
 	/*
 	 * Drain the remaining delta count out of a event
 	 * that we are disabling:
 	 */
-	x86_perf_event_update(event, hwc, idx);
+	x86_perf_event_update(event);
 
 	cpuc->events[idx] = NULL;
 }
@@ -1094,8 +1089,7 @@ static int x86_pmu_handle_irq(struct pt_regs *regs)
 	int idx, handled = 0;
 	u64 val;
 
-	data.addr = 0;
-	data.raw = NULL;
+	perf_sample_data_init(&data, 0);
 
 	cpuc = &__get_cpu_var(cpu_hw_events);
 
@@ -1106,7 +1100,7 @@ static int x86_pmu_handle_irq(struct pt_regs *regs)
 		event = cpuc->events[idx];
 		hwc = &event->hw;
 
-		val = x86_perf_event_update(event, hwc, idx);
+		val = x86_perf_event_update(event);
 		if (val & (1ULL << (x86_pmu.event_bits - 1)))
 			continue;
 
@@ -1116,11 +1110,11 @@ static int x86_pmu_handle_irq(struct pt_regs *regs)
 		handled		= 1;
 		data.period	= event->hw.last_period;
 
-		if (!x86_perf_event_set_period(event, hwc, idx))
+		if (!x86_perf_event_set_period(event))
 			continue;
 
 		if (perf_event_overflow(event, 1, &data, regs))
-			x86_pmu.disable(hwc, idx);
+			x86_pmu_stop(event);
 	}
 
 	if (handled)
@@ -1307,7 +1301,7 @@ int hw_perf_group_sched_in(struct perf_event *leader,
 	memcpy(cpuc->assign, assign, n0*sizeof(int));
 
 	cpuc->n_events  = n0;
-	cpuc->n_added   = n1;
+	cpuc->n_added  += n1;
 	ctx->nr_active += n1;
 
 	/*
@@ -1335,6 +1329,39 @@ undo:
 #include "perf_event_p6.c"
 #include "perf_event_intel.c"
 
+static int __cpuinit
+x86_pmu_notifier(struct notifier_block *self, unsigned long action, void *hcpu)
+{
+	unsigned int cpu = (long)hcpu;
+
+	switch (action & ~CPU_TASKS_FROZEN) {
+	case CPU_UP_PREPARE:
+		if (x86_pmu.cpu_prepare)
+			x86_pmu.cpu_prepare(cpu);
+		break;
+
+	case CPU_STARTING:
+		if (x86_pmu.cpu_starting)
+			x86_pmu.cpu_starting(cpu);
+		break;
+
+	case CPU_DYING:
+		if (x86_pmu.cpu_dying)
+			x86_pmu.cpu_dying(cpu);
+		break;
+
+	case CPU_DEAD:
+		if (x86_pmu.cpu_dead)
+			x86_pmu.cpu_dead(cpu);
+		break;
+
+	default:
+		break;
+	}
+
+	return NOTIFY_OK;
+}
+
 static void __init pmu_check_apic(void)
 {
 	if (cpu_has_apic)
@@ -1347,6 +1374,7 @@ static void __init pmu_check_apic(void)
 
 void __init init_hw_perf_events(void)
 {
+	struct event_constraint *c;
 	int err;
 
 	pr_info("Performance Events: ");
@@ -1395,6 +1423,16 @@ void __init init_hw_perf_events(void)
 		__EVENT_CONSTRAINT(0, (1ULL << x86_pmu.num_events) - 1,
 				   0, x86_pmu.num_events);
 
+	if (x86_pmu.event_constraints) {
+		for_each_event_constraint(c, x86_pmu.event_constraints) {
+			if (c->cmask != INTEL_ARCH_FIXED_MASK)
+				continue;
+
+			c->idxmsk64 |= (1ULL << x86_pmu.num_events) - 1;
+			c->weight += x86_pmu.num_events;
+		}
+	}
+
 	pr_info("... version:                %d\n",     x86_pmu.version);
 	pr_info("... bit width:              %d\n",     x86_pmu.event_bits);
 	pr_info("... generic registers:      %d\n",     x86_pmu.num_events);
@@ -1402,11 +1440,13 @@ void __init init_hw_perf_events(void)
 	pr_info("... max period:             %016Lx\n", x86_pmu.max_period);
 	pr_info("... fixed-purpose events:   %d\n",     x86_pmu.num_events_fixed);
 	pr_info("... event mask:             %016Lx\n", perf_event_mask);
+
+	perf_cpu_notifier(x86_pmu_notifier);
 }
 
 static inline void x86_pmu_read(struct perf_event *event)
 {
-	x86_perf_event_update(event, &event->hw, event->hw.idx);
+	x86_perf_event_update(event);
 }
 
 static const struct pmu pmu = {
@@ -1662,28 +1702,16 @@ struct perf_callchain_entry *perf_callchain(struct pt_regs *regs)
 	return entry;
 }
 
-void hw_perf_event_setup_online(int cpu)
+#ifdef CONFIG_EVENT_TRACING
+void perf_arch_fetch_caller_regs(struct pt_regs *regs, unsigned long ip, int skip)
 {
-	init_debug_store_on_cpu(cpu);
-
-	switch (boot_cpu_data.x86_vendor) {
-	case X86_VENDOR_AMD:
-		amd_pmu_cpu_online(cpu);
-		break;
-	default:
-		return;
-	}
-}
-
-void hw_perf_event_setup_offline(int cpu)
-{
-	init_debug_store_on_cpu(cpu);
-
-	switch (boot_cpu_data.x86_vendor) {
-	case X86_VENDOR_AMD:
-		amd_pmu_cpu_offline(cpu);
-		break;
-	default:
-		return;
-	}
+	regs->ip = ip;
+	/*
+	 * perf_arch_fetch_caller_regs adds another call, we need to increment
+	 * the skip level
+	 */
+	regs->bp = rewind_frame_pointer(skip + 1);
+	regs->cs = __KERNEL_CS;
+	local_save_flags(regs->flags);
 }
+#endif
diff --git a/arch/x86/kernel/cpu/perf_event_amd.c b/arch/x86/kernel/cpu/perf_event_amd.c
index 8f3dbfda3c4f..573458f1caf2 100644
--- a/arch/x86/kernel/cpu/perf_event_amd.c
+++ b/arch/x86/kernel/cpu/perf_event_amd.c
@@ -271,28 +271,6 @@ done:
 	return &emptyconstraint;
 }
 
-static __initconst struct x86_pmu amd_pmu = {
-	.name			= "AMD",
-	.handle_irq		= x86_pmu_handle_irq,
-	.disable_all		= x86_pmu_disable_all,
-	.enable_all		= x86_pmu_enable_all,
-	.enable			= x86_pmu_enable_event,
-	.disable		= x86_pmu_disable_event,
-	.eventsel		= MSR_K7_EVNTSEL0,
-	.perfctr		= MSR_K7_PERFCTR0,
-	.event_map		= amd_pmu_event_map,
-	.raw_event		= amd_pmu_raw_event,
-	.max_events		= ARRAY_SIZE(amd_perfmon_event_map),
-	.num_events		= 4,
-	.event_bits		= 48,
-	.event_mask		= (1ULL << 48) - 1,
-	.apic			= 1,
-	/* use highest bit to detect overflow */
-	.max_period		= (1ULL << 47) - 1,
-	.get_event_constraints	= amd_get_event_constraints,
-	.put_event_constraints	= amd_put_event_constraints
-};
-
 static struct amd_nb *amd_alloc_nb(int cpu, int nb_id)
 {
 	struct amd_nb *nb;
@@ -309,7 +287,7 @@ static struct amd_nb *amd_alloc_nb(int cpu, int nb_id)
 	 * initialize all possible NB constraints
 	 */
 	for (i = 0; i < x86_pmu.num_events; i++) {
-		set_bit(i, nb->event_constraints[i].idxmsk);
+		__set_bit(i, nb->event_constraints[i].idxmsk);
 		nb->event_constraints[i].weight = 1;
 	}
 	return nb;
@@ -378,6 +356,31 @@ static void amd_pmu_cpu_offline(int cpu)
 	raw_spin_unlock(&amd_nb_lock);
 }
 
+static __initconst struct x86_pmu amd_pmu = {
+	.name			= "AMD",
+	.handle_irq		= x86_pmu_handle_irq,
+	.disable_all		= x86_pmu_disable_all,
+	.enable_all		= x86_pmu_enable_all,
+	.enable			= x86_pmu_enable_event,
+	.disable		= x86_pmu_disable_event,
+	.eventsel		= MSR_K7_EVNTSEL0,
+	.perfctr		= MSR_K7_PERFCTR0,
+	.event_map		= amd_pmu_event_map,
+	.raw_event		= amd_pmu_raw_event,
+	.max_events		= ARRAY_SIZE(amd_perfmon_event_map),
+	.num_events		= 4,
+	.event_bits		= 48,
+	.event_mask		= (1ULL << 48) - 1,
+	.apic			= 1,
+	/* use highest bit to detect overflow */
+	.max_period		= (1ULL << 47) - 1,
+	.get_event_constraints	= amd_get_event_constraints,
+	.put_event_constraints	= amd_put_event_constraints,
+
+	.cpu_prepare		= amd_pmu_cpu_online,
+	.cpu_dead		= amd_pmu_cpu_offline,
+};
+
 static __init int amd_pmu_init(void)
 {
 	/* Performance-monitoring supported from K7 and later: */
@@ -390,11 +393,6 @@ static __init int amd_pmu_init(void)
 	memcpy(hw_cache_event_ids, amd_hw_cache_event_ids,
 	       sizeof(hw_cache_event_ids));
 
-	/*
-	 * explicitly initialize the boot cpu, other cpus will get
-	 * the cpu hotplug callbacks from smp_init()
-	 */
-	amd_pmu_cpu_online(smp_processor_id());
 	return 0;
 }
 
@@ -405,12 +403,4 @@ static int amd_pmu_init(void)
 	return 0;
 }
 
-static void amd_pmu_cpu_online(int cpu)
-{
-}
-
-static void amd_pmu_cpu_offline(int cpu)
-{
-}
-
 #endif
diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c
index 977e7544738c..84bfde64a337 100644
--- a/arch/x86/kernel/cpu/perf_event_intel.c
+++ b/arch/x86/kernel/cpu/perf_event_intel.c
@@ -1,7 +1,7 @@
 #ifdef CONFIG_CPU_SUP_INTEL
 
 /*
- * Intel PerfMon v3. Used on Core2 and later.
+ * Intel PerfMon, used on Core and later.
  */
 static const u64 intel_perfmon_event_map[] =
 {
@@ -27,8 +27,14 @@ static struct event_constraint intel_core_event_constraints[] =
 
 static struct event_constraint intel_core2_event_constraints[] =
 {
-	FIXED_EVENT_CONSTRAINT(0xc0, (0x3|(1ULL<<32))), /* INSTRUCTIONS_RETIRED */
-	FIXED_EVENT_CONSTRAINT(0x3c, (0x3|(1ULL<<33))), /* UNHALTED_CORE_CYCLES */
+	FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */
+	FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */
+	/*
+	 * Core2 has Fixed Counter 2 listed as CPU_CLK_UNHALTED.REF and event
+	 * 0x013c as CPU_CLK_UNHALTED.BUS and specifies there is a fixed
+	 * ratio between these counters.
+	 */
+	/* FIXED_EVENT_CONSTRAINT(0x013c, 2),  CPU_CLK_UNHALTED.REF */
 	INTEL_EVENT_CONSTRAINT(0x10, 0x1), /* FP_COMP_OPS_EXE */
 	INTEL_EVENT_CONSTRAINT(0x11, 0x2), /* FP_ASSIST */
 	INTEL_EVENT_CONSTRAINT(0x12, 0x2), /* MUL */
@@ -37,14 +43,16 @@ static struct event_constraint intel_core2_event_constraints[] =
 	INTEL_EVENT_CONSTRAINT(0x18, 0x1), /* IDLE_DURING_DIV */
 	INTEL_EVENT_CONSTRAINT(0x19, 0x2), /* DELAYED_BYPASS */
 	INTEL_EVENT_CONSTRAINT(0xa1, 0x1), /* RS_UOPS_DISPATCH_CYCLES */
+	INTEL_EVENT_CONSTRAINT(0xc9, 0x1), /* ITLB_MISS_RETIRED (T30-9) */
 	INTEL_EVENT_CONSTRAINT(0xcb, 0x1), /* MEM_LOAD_RETIRED */
 	EVENT_CONSTRAINT_END
 };
 
 static struct event_constraint intel_nehalem_event_constraints[] =
 {
-	FIXED_EVENT_CONSTRAINT(0xc0, (0xf|(1ULL<<32))), /* INSTRUCTIONS_RETIRED */
-	FIXED_EVENT_CONSTRAINT(0x3c, (0xf|(1ULL<<33))), /* UNHALTED_CORE_CYCLES */
+	FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */
+	FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */
+	/* FIXED_EVENT_CONSTRAINT(0x013c, 2), CPU_CLK_UNHALTED.REF */
 	INTEL_EVENT_CONSTRAINT(0x40, 0x3), /* L1D_CACHE_LD */
 	INTEL_EVENT_CONSTRAINT(0x41, 0x3), /* L1D_CACHE_ST */
 	INTEL_EVENT_CONSTRAINT(0x42, 0x3), /* L1D_CACHE_LOCK */
@@ -58,8 +66,9 @@ static struct event_constraint intel_nehalem_event_constraints[] =
 
 static struct event_constraint intel_westmere_event_constraints[] =
 {
-	FIXED_EVENT_CONSTRAINT(0xc0, (0xf|(1ULL<<32))), /* INSTRUCTIONS_RETIRED */
-	FIXED_EVENT_CONSTRAINT(0x3c, (0xf|(1ULL<<33))), /* UNHALTED_CORE_CYCLES */
+	FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */
+	FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */
+	/* FIXED_EVENT_CONSTRAINT(0x013c, 2), CPU_CLK_UNHALTED.REF */
 	INTEL_EVENT_CONSTRAINT(0x51, 0x3), /* L1D */
 	INTEL_EVENT_CONSTRAINT(0x60, 0x1), /* OFFCORE_REQUESTS_OUTSTANDING */
 	INTEL_EVENT_CONSTRAINT(0x63, 0x3), /* CACHE_LOCK_CYCLES */
@@ -68,8 +77,9 @@ static struct event_constraint intel_westmere_event_constraints[] =
 
 static struct event_constraint intel_gen_event_constraints[] =
 {
-	FIXED_EVENT_CONSTRAINT(0xc0, (0x3|(1ULL<<32))), /* INSTRUCTIONS_RETIRED */
-	FIXED_EVENT_CONSTRAINT(0x3c, (0x3|(1ULL<<33))), /* UNHALTED_CORE_CYCLES */
+	FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */
+	FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */
+	/* FIXED_EVENT_CONSTRAINT(0x013c, 2), CPU_CLK_UNHALTED.REF */
 	EVENT_CONSTRAINT_END
 };
 
@@ -538,9 +548,9 @@ static inline void intel_pmu_ack_status(u64 ack)
 }
 
 static inline void
-intel_pmu_disable_fixed(struct hw_perf_event *hwc, int __idx)
+intel_pmu_disable_fixed(struct hw_perf_event *hwc)
 {
-	int idx = __idx - X86_PMC_IDX_FIXED;
+	int idx = hwc->idx - X86_PMC_IDX_FIXED;
 	u64 ctrl_val, mask;
 
 	mask = 0xfULL << (idx * 4);
@@ -580,10 +590,9 @@ static void intel_pmu_drain_bts_buffer(void)
 
 	ds->bts_index = ds->bts_buffer_base;
 
+	perf_sample_data_init(&data, 0);
 
 	data.period	= event->hw.last_period;
-	data.addr	= 0;
-	data.raw	= NULL;
 	regs.ip		= 0;
 
 	/*
@@ -612,26 +621,28 @@ static void intel_pmu_drain_bts_buffer(void)
 }
 
 static inline void
-intel_pmu_disable_event(struct hw_perf_event *hwc, int idx)
+intel_pmu_disable_event(struct perf_event *event)
 {
-	if (unlikely(idx == X86_PMC_IDX_FIXED_BTS)) {
+	struct hw_perf_event *hwc = &event->hw;
+
+	if (unlikely(hwc->idx == X86_PMC_IDX_FIXED_BTS)) {
 		intel_pmu_disable_bts();
 		intel_pmu_drain_bts_buffer();
 		return;
 	}
 
 	if (unlikely(hwc->config_base == MSR_ARCH_PERFMON_FIXED_CTR_CTRL)) {
-		intel_pmu_disable_fixed(hwc, idx);
+		intel_pmu_disable_fixed(hwc);
 		return;
 	}
 
-	x86_pmu_disable_event(hwc, idx);
+	x86_pmu_disable_event(event);
 }
 
 static inline void
-intel_pmu_enable_fixed(struct hw_perf_event *hwc, int __idx)
+intel_pmu_enable_fixed(struct hw_perf_event *hwc)
 {
-	int idx = __idx - X86_PMC_IDX_FIXED;
+	int idx = hwc->idx - X86_PMC_IDX_FIXED;
 	u64 ctrl_val, bits, mask;
 	int err;
 
@@ -661,9 +672,11 @@ intel_pmu_enable_fixed(struct hw_perf_event *hwc, int __idx)
 	err = checking_wrmsrl(hwc->config_base, ctrl_val);
 }
 
-static void intel_pmu_enable_event(struct hw_perf_event *hwc, int idx)
+static void intel_pmu_enable_event(struct perf_event *event)
 {
-	if (unlikely(idx == X86_PMC_IDX_FIXED_BTS)) {
+	struct hw_perf_event *hwc = &event->hw;
+
+	if (unlikely(hwc->idx == X86_PMC_IDX_FIXED_BTS)) {
 		if (!__get_cpu_var(cpu_hw_events).enabled)
 			return;
 
@@ -672,11 +685,11 @@ static void intel_pmu_enable_event(struct hw_perf_event *hwc, int idx)
 	}
 
 	if (unlikely(hwc->config_base == MSR_ARCH_PERFMON_FIXED_CTR_CTRL)) {
-		intel_pmu_enable_fixed(hwc, idx);
+		intel_pmu_enable_fixed(hwc);
 		return;
 	}
 
-	__x86_pmu_enable_event(hwc, idx);
+	__x86_pmu_enable_event(hwc);
 }
 
 /*
@@ -685,14 +698,8 @@ static void intel_pmu_enable_event(struct hw_perf_event *hwc, int idx)
  */
 static int intel_pmu_save_and_restart(struct perf_event *event)
 {
-	struct hw_perf_event *hwc = &event->hw;
-	int idx = hwc->idx;
-	int ret;
-
-	x86_perf_event_update(event, hwc, idx);
-	ret = x86_perf_event_set_period(event, hwc, idx);
-
-	return ret;
+	x86_perf_event_update(event);
+	return x86_perf_event_set_period(event);
 }
 
 static void intel_pmu_reset(void)
@@ -732,16 +739,15 @@ static int intel_pmu_handle_irq(struct pt_regs *regs)
 	int bit, loops;
 	u64 ack, status;
 
-	data.addr = 0;
-	data.raw = NULL;
+	perf_sample_data_init(&data, 0);
 
 	cpuc = &__get_cpu_var(cpu_hw_events);
 
-	perf_disable();
+	intel_pmu_disable_all();
 	intel_pmu_drain_bts_buffer();
 	status = intel_pmu_get_status();
 	if (!status) {
-		perf_enable();
+		intel_pmu_enable_all();
 		return 0;
 	}
 
@@ -751,8 +757,7 @@ again:
 		WARN_ONCE(1, "perfevents: irq loop stuck!\n");
 		perf_event_print_debug();
 		intel_pmu_reset();
-		perf_enable();
-		return 1;
+		goto done;
 	}
 
 	inc_irq_stat(apic_perf_irqs);
@@ -760,7 +765,6 @@ again:
 	for_each_set_bit(bit, (unsigned long *)&status, X86_PMC_IDX_MAX) {
 		struct perf_event *event = cpuc->events[bit];
 
-		clear_bit(bit, (unsigned long *) &status);
 		if (!test_bit(bit, cpuc->active_mask))
 			continue;
 
@@ -770,7 +774,7 @@ again:
 		data.period = event->hw.last_period;
 
 		if (perf_event_overflow(event, 1, &data, regs))
-			intel_pmu_disable_event(&event->hw, bit);
+			x86_pmu_stop(event);
 	}
 
 	intel_pmu_ack_status(ack);
@@ -782,8 +786,8 @@ again:
 	if (status)
 		goto again;
 
-	perf_enable();
-
+done:
+	intel_pmu_enable_all();
 	return 1;
 }
 
@@ -862,7 +866,10 @@ static __initconst struct x86_pmu intel_pmu = {
 	.max_period		= (1ULL << 31) - 1,
 	.enable_bts		= intel_pmu_enable_bts,
 	.disable_bts		= intel_pmu_disable_bts,
-	.get_event_constraints	= intel_get_event_constraints
+	.get_event_constraints	= intel_get_event_constraints,
+
+	.cpu_starting		= init_debug_store_on_cpu,
+	.cpu_dying		= fini_debug_store_on_cpu,
 };
 
 static __init int intel_pmu_init(void)
@@ -935,7 +942,7 @@ static __init int intel_pmu_init(void)
 		x86_pmu.event_constraints = intel_nehalem_event_constraints;
 		pr_cont("Nehalem/Corei7 events, ");
 		break;
-	case 28:
+	case 28: /* Atom */
 		memcpy(hw_cache_event_ids, atom_hw_cache_event_ids,
 		       sizeof(hw_cache_event_ids));
 
@@ -951,6 +958,7 @@ static __init int intel_pmu_init(void)
 		x86_pmu.event_constraints = intel_westmere_event_constraints;
 		pr_cont("Westmere events, ");
 		break;
+
 	default:
 		/*
 		 * default constraints for v2 and up
diff --git a/arch/x86/kernel/cpu/perf_event_p6.c b/arch/x86/kernel/cpu/perf_event_p6.c
index 1ca5ba078afd..a330485d14da 100644
--- a/arch/x86/kernel/cpu/perf_event_p6.c
+++ b/arch/x86/kernel/cpu/perf_event_p6.c
@@ -62,7 +62,7 @@ static void p6_pmu_disable_all(void)
 
 	/* p6 only has one enable register */
 	rdmsrl(MSR_P6_EVNTSEL0, val);
-	val &= ~ARCH_PERFMON_EVENTSEL0_ENABLE;
+	val &= ~ARCH_PERFMON_EVENTSEL_ENABLE;
 	wrmsrl(MSR_P6_EVNTSEL0, val);
 }
 
@@ -72,32 +72,34 @@ static void p6_pmu_enable_all(void)
 
 	/* p6 only has one enable register */
 	rdmsrl(MSR_P6_EVNTSEL0, val);
-	val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+	val |= ARCH_PERFMON_EVENTSEL_ENABLE;
 	wrmsrl(MSR_P6_EVNTSEL0, val);
 }
 
 static inline void
-p6_pmu_disable_event(struct hw_perf_event *hwc, int idx)
+p6_pmu_disable_event(struct perf_event *event)
 {
 	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	struct hw_perf_event *hwc = &event->hw;
 	u64 val = P6_NOP_EVENT;
 
 	if (cpuc->enabled)
-		val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+		val |= ARCH_PERFMON_EVENTSEL_ENABLE;
 
-	(void)checking_wrmsrl(hwc->config_base + idx, val);
+	(void)checking_wrmsrl(hwc->config_base + hwc->idx, val);
 }
 
-static void p6_pmu_enable_event(struct hw_perf_event *hwc, int idx)
+static void p6_pmu_enable_event(struct perf_event *event)
 {
 	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	struct hw_perf_event *hwc = &event->hw;
 	u64 val;
 
 	val = hwc->config;
 	if (cpuc->enabled)
-		val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+		val |= ARCH_PERFMON_EVENTSEL_ENABLE;
 
-	(void)checking_wrmsrl(hwc->config_base + idx, val);
+	(void)checking_wrmsrl(hwc->config_base + hwc->idx, val);
 }
 
 static __initconst struct x86_pmu p6_pmu = {
diff --git a/arch/x86/kernel/cpu/perfctr-watchdog.c b/arch/x86/kernel/cpu/perfctr-watchdog.c
index 74f4e85a5727..fb329e9f8494 100644
--- a/arch/x86/kernel/cpu/perfctr-watchdog.c
+++ b/arch/x86/kernel/cpu/perfctr-watchdog.c
@@ -680,7 +680,7 @@ static int setup_intel_arch_watchdog(unsigned nmi_hz)
 	cpu_nmi_set_wd_enabled();
 
 	apic_write(APIC_LVTPC, APIC_DM_NMI);
-	evntsel |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+	evntsel |= ARCH_PERFMON_EVENTSEL_ENABLE;
 	wrmsr(evntsel_msr, evntsel, 0);
 	intel_arch_wd_ops.checkbit = 1ULL << (eax.split.bit_width - 1);
 	return 1;
diff --git a/arch/x86/kernel/dumpstack.h b/arch/x86/kernel/dumpstack.h
index 4fd1420faffa..29e5f7c845b2 100644
--- a/arch/x86/kernel/dumpstack.h
+++ b/arch/x86/kernel/dumpstack.h
@@ -29,4 +29,19 @@ struct stack_frame {
 	struct stack_frame *next_frame;
 	unsigned long return_address;
 };
+
+static inline unsigned long rewind_frame_pointer(int n)
+{
+	struct stack_frame *frame;
+
+	get_bp(frame);
+
+#ifdef CONFIG_FRAME_POINTER
+	while (n--)
+		frame = frame->next_frame;
 #endif
+
+	return (unsigned long)frame;
+}
+
+#endif /* DUMPSTACK_H */
diff --git a/arch/x86/kernel/dumpstack_64.c b/arch/x86/kernel/dumpstack_64.c
index dce99abb4496..272c9f1f05f3 100644
--- a/arch/x86/kernel/dumpstack_64.c
+++ b/arch/x86/kernel/dumpstack_64.c
@@ -120,9 +120,15 @@ fixup_bp_irq_link(unsigned long bp, unsigned long *stack,
 {
 #ifdef CONFIG_FRAME_POINTER
 	struct stack_frame *frame = (struct stack_frame *)bp;
+	unsigned long next;
 
-	if (!in_irq_stack(stack, irq_stack, irq_stack_end))
-		return (unsigned long)frame->next_frame;
+	if (!in_irq_stack(stack, irq_stack, irq_stack_end)) {
+		if (!probe_kernel_address(&frame->next_frame, next))
+			return next;
+		else
+			WARN_ONCE(1, "Perf: bad frame pointer = %p in "
+				  "callchain\n", &frame->next_frame);
+	}
 #endif
 	return bp;
 }
@@ -202,7 +208,7 @@ void dump_trace(struct task_struct *task, struct pt_regs *regs,
 			if (in_irq_stack(stack, irq_stack, irq_stack_end)) {
 				if (ops->stack(data, "IRQ") < 0)
 					break;
-				bp = print_context_stack(tinfo, stack, bp,
+				bp = ops->walk_stack(tinfo, stack, bp,
 					ops, data, irq_stack_end, &graph);
 				/*
 				 * We link to the next stack (which would be
@@ -223,7 +229,7 @@ void dump_trace(struct task_struct *task, struct pt_regs *regs,
 	/*
 	 * This handles the process stack:
 	 */
-	bp = print_context_stack(tinfo, stack, bp, ops, data, NULL, &graph);
+	bp = ops->walk_stack(tinfo, stack, bp, ops, data, NULL, &graph);
 	put_cpu();
 }
 EXPORT_SYMBOL(dump_trace);
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index 2d8b5035371c..3d1e6f16b7a6 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -27,7 +27,7 @@
 #define GET_CR2_INTO_RCX movq %cr2, %rcx
 #endif
 
-/* we are not able to switch in one step to the final KERNEL ADRESS SPACE
+/* we are not able to switch in one step to the final KERNEL ADDRESS SPACE
  * because we need identity-mapped pages.
  *
  */
diff --git a/arch/x86/kernel/hw_breakpoint.c b/arch/x86/kernel/hw_breakpoint.c
index dca2802c666f..d6cc065f519f 100644
--- a/arch/x86/kernel/hw_breakpoint.c
+++ b/arch/x86/kernel/hw_breakpoint.c
@@ -344,13 +344,6 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp,
 	}
 
 	/*
-	 * For kernel-addresses, either the address or symbol name can be
-	 * specified.
-	 */
-	if (info->name)
-		info->address = (unsigned long)
-				kallsyms_lookup_name(info->name);
-	/*
 	 * Check that the low-order bits of the address are appropriate
 	 * for the alignment implied by len.
 	 */
@@ -535,8 +528,3 @@ void hw_breakpoint_pmu_read(struct perf_event *bp)
 {
 	/* TODO */
 }
-
-void hw_breakpoint_pmu_unthrottle(struct perf_event *bp)
-{
-	/* TODO */
-}
diff --git a/arch/x86/kernel/k8.c b/arch/x86/kernel/k8.c
index cbc4332a77b2..9b895464dd03 100644
--- a/arch/x86/kernel/k8.c
+++ b/arch/x86/kernel/k8.c
@@ -121,3 +121,17 @@ void k8_flush_garts(void)
 }
 EXPORT_SYMBOL_GPL(k8_flush_garts);
 
+static __init int init_k8_nbs(void)
+{
+	int err = 0;
+
+	err = cache_k8_northbridges();
+
+	if (err < 0)
+		printk(KERN_NOTICE "K8 NB: Cannot enumerate AMD northbridges.\n");
+
+	return err;
+}
+
+/* This has to go after the PCI subsystem */
+fs_initcall(init_k8_nbs);
diff --git a/arch/x86/kernel/pci-calgary_64.c b/arch/x86/kernel/pci-calgary_64.c
index 2bbde6078143..fb99f7edb341 100644
--- a/arch/x86/kernel/pci-calgary_64.c
+++ b/arch/x86/kernel/pci-calgary_64.c
@@ -1309,7 +1309,7 @@ static void calgary_init_bitmap_from_tce_table(struct iommu_table *tbl)
 /*
  * get_tce_space_from_tar():
  * Function for kdump case. Get the tce tables from first kernel
- * by reading the contents of the base adress register of calgary iommu
+ * by reading the contents of the base address register of calgary iommu
  */
 static void __init get_tce_space_from_tar(void)
 {
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index 1aa966c565f9..a4ac764a6880 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -38,7 +38,7 @@ int iommu_detected __read_mostly = 0;
  * This variable becomes 1 if iommu=pt is passed on the kernel command line.
  * If this variable is 1, IOMMU implementations do no DMA translation for
  * devices and allow every device to access to whole physical memory. This is
- * useful if a user want to use an IOMMU only for KVM device assignment to
+ * useful if a user wants to use an IOMMU only for KVM device assignment to
  * guests and not for driver dma translation.
  */
 int iommu_pass_through __read_mostly;
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c
index 34de53b46f87..f3af115a573a 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -735,7 +735,7 @@ int __init gart_iommu_init(void)
 	unsigned long scratch;
 	long i;
 
-	if (cache_k8_northbridges() < 0 || num_k8_northbridges == 0)
+	if (num_k8_northbridges == 0)
 		return 0;
 
 #ifndef CONFIG_AGP_AMD64
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 02d678065d7d..ad9540676fcc 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -607,7 +607,7 @@ void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c)
 {
 #ifdef CONFIG_SMP
 	if (pm_idle == poll_idle && smp_num_siblings > 1) {
-		printk(KERN_WARNING "WARNING: polling idle and HT enabled,"
+		printk_once(KERN_WARNING "WARNING: polling idle and HT enabled,"
 			" performance may degrade.\n");
 	}
 #endif
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index 2d96aab82a48..a503b1fd04e5 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -581,7 +581,7 @@ ptrace_modify_breakpoint(struct perf_event *bp, int len, int type,
 	struct perf_event_attr attr;
 
 	/*
-	 * We shoud have at least an inactive breakpoint at this
+	 * We should have at least an inactive breakpoint at this
 	 * slot. It means the user is writing dr7 without having
 	 * written the address register first
 	 */
diff --git a/arch/x86/kernel/sys_i386_32.c b/arch/x86/kernel/sys_i386_32.c
index dee1ff7cba58..196552bb412c 100644
--- a/arch/x86/kernel/sys_i386_32.c
+++ b/arch/x86/kernel/sys_i386_32.c
@@ -25,191 +25,6 @@
 #include <asm/syscalls.h>
 
 /*
- * Perform the select(nd, in, out, ex, tv) and mmap() system
- * calls. Linux/i386 didn't use to be able to handle more than
- * 4 system call parameters, so these system calls used a memory
- * block for parameter passing..
- */
-
-struct mmap_arg_struct {
-	unsigned long addr;
-	unsigned long len;
-	unsigned long prot;
-	unsigned long flags;
-	unsigned long fd;
-	unsigned long offset;
-};
-
-asmlinkage int old_mmap(struct mmap_arg_struct __user *arg)
-{
-	struct mmap_arg_struct a;
-	int err = -EFAULT;
-
-	if (copy_from_user(&a, arg, sizeof(a)))
-		goto out;
-
-	err = -EINVAL;
-	if (a.offset & ~PAGE_MASK)
-		goto out;
-
-	err = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags,
-			a.fd, a.offset >> PAGE_SHIFT);
-out:
-	return err;
-}
-
-
-struct sel_arg_struct {
-	unsigned long n;
-	fd_set __user *inp, *outp, *exp;
-	struct timeval __user *tvp;
-};
-
-asmlinkage int old_select(struct sel_arg_struct __user *arg)
-{
-	struct sel_arg_struct a;
-
-	if (copy_from_user(&a, arg, sizeof(a)))
-		return -EFAULT;
-	/* sys_select() does the appropriate kernel locking */
-	return sys_select(a.n, a.inp, a.outp, a.exp, a.tvp);
-}
-
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly.
- */
-asmlinkage int sys_ipc(uint call, int first, int second,
-			int third, void __user *ptr, long fifth)
-{
-	int version, ret;
-
-	version = call >> 16; /* hack for backward compatibility */
-	call &= 0xffff;
-
-	switch (call) {
-	case SEMOP:
-		return sys_semtimedop(first, (struct sembuf __user *)ptr, second, NULL);
-	case SEMTIMEDOP:
-		return sys_semtimedop(first, (struct sembuf __user *)ptr, second,
-					(const struct timespec __user *)fifth);
-
-	case SEMGET:
-		return sys_semget(first, second, third);
-	case SEMCTL: {
-		union semun fourth;
-		if (!ptr)
-			return -EINVAL;
-		if (get_user(fourth.__pad, (void __user * __user *) ptr))
-			return -EFAULT;
-		return sys_semctl(first, second, third, fourth);
-	}
-
-	case MSGSND:
-		return sys_msgsnd(first, (struct msgbuf __user *) ptr,
-				   second, third);
-	case MSGRCV:
-		switch (version) {
-		case 0: {
-			struct ipc_kludge tmp;
-			if (!ptr)
-				return -EINVAL;
-
-			if (copy_from_user(&tmp,
-					   (struct ipc_kludge __user *) ptr,
-					   sizeof(tmp)))
-				return -EFAULT;
-			return sys_msgrcv(first, tmp.msgp, second,
-					   tmp.msgtyp, third);
-		}
-		default:
-			return sys_msgrcv(first,
-					   (struct msgbuf __user *) ptr,
-					   second, fifth, third);
-		}
-	case MSGGET:
-		return sys_msgget((key_t) first, second);
-	case MSGCTL:
-		return sys_msgctl(first, second, (struct msqid_ds __user *) ptr);
-
-	case SHMAT:
-		switch (version) {
-		default: {
-			ulong raddr;
-			ret = do_shmat(first, (char __user *) ptr, second, &raddr);
-			if (ret)
-				return ret;
-			return put_user(raddr, (ulong __user *) third);
-		}
-		case 1:	/* iBCS2 emulator entry point */
-			if (!segment_eq(get_fs(), get_ds()))
-				return -EINVAL;
-			/* The "(ulong *) third" is valid _only_ because of the kernel segment thing */
-			return do_shmat(first, (char __user *) ptr, second, (ulong *) third);
-		}
-	case SHMDT:
-		return sys_shmdt((char __user *)ptr);
-	case SHMGET:
-		return sys_shmget(first, second, third);
-	case SHMCTL:
-		return sys_shmctl(first, second,
-				   (struct shmid_ds __user *) ptr);
-	default:
-		return -ENOSYS;
-	}
-}
-
-/*
- * Old cruft
- */
-asmlinkage int sys_uname(struct old_utsname __user *name)
-{
-	int err;
-	if (!name)
-		return -EFAULT;
-	down_read(&uts_sem);
-	err = copy_to_user(name, utsname(), sizeof(*name));
-	up_read(&uts_sem);
-	return err? -EFAULT:0;
-}
-
-asmlinkage int sys_olduname(struct oldold_utsname __user *name)
-{
-	int error;
-
-	if (!name)
-		return -EFAULT;
-	if (!access_ok(VERIFY_WRITE, name, sizeof(struct oldold_utsname)))
-		return -EFAULT;
-
-	down_read(&uts_sem);
-
-	error = __copy_to_user(&name->sysname, &utsname()->sysname,
-			       __OLD_UTS_LEN);
-	error |= __put_user(0, name->sysname + __OLD_UTS_LEN);
-	error |= __copy_to_user(&name->nodename, &utsname()->nodename,
-				__OLD_UTS_LEN);
-	error |= __put_user(0, name->nodename + __OLD_UTS_LEN);
-	error |= __copy_to_user(&name->release, &utsname()->release,
-				__OLD_UTS_LEN);
-	error |= __put_user(0, name->release + __OLD_UTS_LEN);
-	error |= __copy_to_user(&name->version, &utsname()->version,
-				__OLD_UTS_LEN);
-	error |= __put_user(0, name->version + __OLD_UTS_LEN);
-	error |= __copy_to_user(&name->machine, &utsname()->machine,
-				__OLD_UTS_LEN);
-	error |= __put_user(0, name->machine + __OLD_UTS_LEN);
-
-	up_read(&uts_sem);
-
-	error = error ? -EFAULT : 0;
-
-	return error;
-}
-
-
-/*
  * Do a system call from kernel instead of calling sys_execve so we
  * end up with proper pt_regs.
  */
diff --git a/arch/x86/kernel/sys_x86_64.c b/arch/x86/kernel/sys_x86_64.c
index 8aa2057efd12..ff14a5044ce6 100644
--- a/arch/x86/kernel/sys_x86_64.c
+++ b/arch/x86/kernel/sys_x86_64.c
@@ -209,15 +209,3 @@ bottomup:
 
 	return addr;
 }
-
-
-SYSCALL_DEFINE1(uname, struct new_utsname __user *, name)
-{
-	int err;
-	down_read(&uts_sem);
-	err = copy_to_user(name, utsname(), sizeof(*name));
-	up_read(&uts_sem);
-	if (personality(current->personality) == PER_LINUX32)
-		err |= copy_to_user(&name->machine, "i686", 5);
-	return err ? -EFAULT : 0;
-}
diff --git a/arch/x86/kernel/syscall_table_32.S b/arch/x86/kernel/syscall_table_32.S
index 15228b5d3eb7..8b3729341216 100644
--- a/arch/x86/kernel/syscall_table_32.S
+++ b/arch/x86/kernel/syscall_table_32.S
@@ -81,7 +81,7 @@ ENTRY(sys_call_table)
 	.long sys_settimeofday
 	.long sys_getgroups16	/* 80 */
 	.long sys_setgroups16
-	.long old_select
+	.long sys_old_select
 	.long sys_symlink
 	.long sys_lstat
 	.long sys_readlink	/* 85 */
@@ -89,7 +89,7 @@ ENTRY(sys_call_table)
 	.long sys_swapon
 	.long sys_reboot
 	.long sys_old_readdir
-	.long old_mmap		/* 90 */
+	.long sys_old_mmap	/* 90 */
 	.long sys_munmap
 	.long sys_truncate
 	.long sys_ftruncate
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 208a857c679f..9faf91ae1841 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -50,7 +50,7 @@ u64 native_sched_clock(void)
 	 *   unstable. We do this because unlike Time Of Day,
 	 *   the scheduler clock tolerates small errors and it's
 	 *   very important for it to be as fast as the platform
-	 *   can achive it. )
+	 *   can achieve it. )
 	 */
 	if (unlikely(tsc_disabled)) {
 		/* No locking but a rare wrong value is not a big deal: */
diff --git a/arch/x86/kernel/vmiclock_32.c b/arch/x86/kernel/vmiclock_32.c
index 2f1ca5614292..5e1ff66ecd73 100644
--- a/arch/x86/kernel/vmiclock_32.c
+++ b/arch/x86/kernel/vmiclock_32.c
@@ -167,7 +167,7 @@ static int vmi_timer_next_event(unsigned long delta,
 {
 	/* Unfortunately, set_next_event interface only passes relative
 	 * expiry, but we want absolute expiry.  It'd be better if were
-	 * were passed an aboslute expiry, since a bunch of time may
+	 * were passed an absolute expiry, since a bunch of time may
 	 * have been stolen between the time the delta is computed and
 	 * when we set the alarm below. */
 	cycle_t now = vmi_timer_ops.get_cycle_counter(vmi_counter(VMI_ONESHOT));
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 1d4eb93d333c..cf07c26d9a4a 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -291,8 +291,29 @@ static inline pgprot_t static_protections(pgprot_t prot, unsigned long address,
 	 */
 	if (kernel_set_to_readonly &&
 	    within(address, (unsigned long)_text,
-		   (unsigned long)__end_rodata_hpage_align))
-		pgprot_val(forbidden) |= _PAGE_RW;
+		   (unsigned long)__end_rodata_hpage_align)) {
+		unsigned int level;
+
+		/*
+		 * Don't enforce the !RW mapping for the kernel text mapping,
+		 * if the current mapping is already using small page mapping.
+		 * No need to work hard to preserve large page mappings in this
+		 * case.
+		 *
+		 * This also fixes the Linux Xen paravirt guest boot failure
+		 * (because of unexpected read-only mappings for kernel identity
+		 * mappings). In this paravirt guest case, the kernel text
+		 * mapping and the kernel identity mapping share the same
+		 * page-table pages. Thus we can't really use different
+		 * protections for the kernel text and identity mappings. Also,
+		 * these shared mappings are made of small page mappings.
+		 * Thus this don't enforce !RW mapping for small page kernel
+		 * text mapping logic will help Linux Xen parvirt guest boot
+		 * aswell.
+		 */
+		if (lookup_address(address, &level) && (level != PG_LEVEL_4K))
+			pgprot_val(forbidden) |= _PAGE_RW;
+	}
 #endif
 
 	prot = __pgprot(pgprot_val(prot) & ~pgprot_val(forbidden));
diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index 6a58256dce9f..090cbbec7dbd 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -46,17 +46,6 @@
 
 static unsigned long reset_value[NUM_VIRT_COUNTERS];
 
-/* IbsFetchCtl bits/masks */
-#define IBS_FETCH_RAND_EN		(1ULL<<57)
-#define IBS_FETCH_VAL			(1ULL<<49)
-#define IBS_FETCH_ENABLE		(1ULL<<48)
-#define IBS_FETCH_CNT_MASK		0xFFFF0000ULL
-
-/* IbsOpCtl bits */
-#define IBS_OP_CNT_CTL			(1ULL<<19)
-#define IBS_OP_VAL			(1ULL<<18)
-#define IBS_OP_ENABLE			(1ULL<<17)
-
 #define IBS_FETCH_SIZE			6
 #define IBS_OP_SIZE			12
 
@@ -182,7 +171,7 @@ static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
 			continue;
 		}
 		rdmsrl(msrs->controls[i].addr, val);
-		if (val & ARCH_PERFMON_EVENTSEL0_ENABLE)
+		if (val & ARCH_PERFMON_EVENTSEL_ENABLE)
 			op_x86_warn_in_use(i);
 		val &= model->reserved;
 		wrmsrl(msrs->controls[i].addr, val);
@@ -290,7 +279,7 @@ op_amd_handle_ibs(struct pt_regs * const regs,
 			oprofile_write_commit(&entry);
 
 			/* reenable the IRQ */
-			ctl &= ~(IBS_FETCH_VAL | IBS_FETCH_CNT_MASK);
+			ctl &= ~(IBS_FETCH_VAL | IBS_FETCH_CNT);
 			ctl |= IBS_FETCH_ENABLE;
 			wrmsrl(MSR_AMD64_IBSFETCHCTL, ctl);
 		}
@@ -330,7 +319,7 @@ static inline void op_amd_start_ibs(void)
 		return;
 
 	if (ibs_config.fetch_enabled) {
-		val = (ibs_config.max_cnt_fetch >> 4) & 0xFFFF;
+		val = (ibs_config.max_cnt_fetch >> 4) & IBS_FETCH_MAX_CNT;
 		val |= ibs_config.rand_en ? IBS_FETCH_RAND_EN : 0;
 		val |= IBS_FETCH_ENABLE;
 		wrmsrl(MSR_AMD64_IBSFETCHCTL, val);
@@ -352,7 +341,7 @@ static inline void op_amd_start_ibs(void)
 			 * avoid underflows.
 			 */
 			ibs_op_ctl = min(ibs_op_ctl + IBS_RANDOM_MAXCNT_OFFSET,
-					 0xFFFFULL);
+					 IBS_OP_MAX_CNT);
 		}
 		if (ibs_caps & IBS_CAPS_OPCNT && ibs_config.dispatched_ops)
 			ibs_op_ctl |= IBS_OP_CNT_CTL;
@@ -409,7 +398,7 @@ static void op_amd_start(struct op_msrs const * const msrs)
 		if (!reset_value[op_x86_phys_to_virt(i)])
 			continue;
 		rdmsrl(msrs->controls[i].addr, val);
-		val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+		val |= ARCH_PERFMON_EVENTSEL_ENABLE;
 		wrmsrl(msrs->controls[i].addr, val);
 	}
 
@@ -429,7 +418,7 @@ static void op_amd_stop(struct op_msrs const * const msrs)
 		if (!reset_value[op_x86_phys_to_virt(i)])
 			continue;
 		rdmsrl(msrs->controls[i].addr, val);
-		val &= ~ARCH_PERFMON_EVENTSEL0_ENABLE;
+		val &= ~ARCH_PERFMON_EVENTSEL_ENABLE;
 		wrmsrl(msrs->controls[i].addr, val);
 	}
 
diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
index 5d1727ba409e..2bf90fafa7b5 100644
--- a/arch/x86/oprofile/op_model_ppro.c
+++ b/arch/x86/oprofile/op_model_ppro.c
@@ -88,7 +88,7 @@ static void ppro_setup_ctrs(struct op_x86_model_spec const *model,
 			continue;
 		}
 		rdmsrl(msrs->controls[i].addr, val);
-		if (val & ARCH_PERFMON_EVENTSEL0_ENABLE)
+		if (val & ARCH_PERFMON_EVENTSEL_ENABLE)
 			op_x86_warn_in_use(i);
 		val &= model->reserved;
 		wrmsrl(msrs->controls[i].addr, val);
@@ -166,7 +166,7 @@ static void ppro_start(struct op_msrs const * const msrs)
 	for (i = 0; i < num_counters; ++i) {
 		if (reset_value[i]) {
 			rdmsrl(msrs->controls[i].addr, val);
-			val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+			val |= ARCH_PERFMON_EVENTSEL_ENABLE;
 			wrmsrl(msrs->controls[i].addr, val);
 		}
 	}
@@ -184,7 +184,7 @@ static void ppro_stop(struct op_msrs const * const msrs)
 		if (!reset_value[i])
 			continue;
 		rdmsrl(msrs->controls[i].addr, val);
-		val &= ~ARCH_PERFMON_EVENTSEL0_ENABLE;
+		val &= ~ARCH_PERFMON_EVENTSEL_ENABLE;
 		wrmsrl(msrs->controls[i].addr, val);
 	}
 }
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index 563d20504988..deafb65ef44e 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -361,7 +361,7 @@ static void xen_cpu_die(unsigned int cpu)
 		alternatives_smp_switch(0);
 }
 
-static void __cpuinit xen_play_dead(void) /* used only with CPU_HOTPLUG */
+static void __cpuinit xen_play_dead(void) /* used only with HOTPLUG_CPU */
 {
 	play_dead_common();
 	HYPERVISOR_vcpu_op(VCPUOP_down, smp_processor_id(), NULL);
diff --git a/arch/xtensa/include/asm/pci.h b/arch/xtensa/include/asm/pci.h
index 66410acf18b4..4609b0f15f1f 100644
--- a/arch/xtensa/include/asm/pci.h
+++ b/arch/xtensa/include/asm/pci.h
@@ -56,14 +56,6 @@ struct pci_dev;
 
 #define PCI_DMA_BUS_IS_PHYS	(1)
 
-/* pci_unmap_{page,single} is a no-op, so */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
-#define pci_unmap_addr(PTR, ADDR_NAME)		(0)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	do { } while (0)
-#define pci_ubnmap_len(PTR, LEN_NAME)		(0)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0)
-
 /* Map a range of PCI memory or I/O space for a device into user space */
 int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma,
                         enum pci_mmap_state mmap_state, int write_combine);
diff --git a/arch/xtensa/include/asm/ptrace.h b/arch/xtensa/include/asm/ptrace.h
index 905e1e619654..3c549f798727 100644
--- a/arch/xtensa/include/asm/ptrace.h
+++ b/arch/xtensa/include/asm/ptrace.h
@@ -113,6 +113,7 @@ struct pt_regs {
 
 #include <variant/core.h>
 
+# define arch_has_single_step()	(1)
 # define task_pt_regs(tsk) ((struct pt_regs*) \
   (task_stack_page(tsk) + KERNEL_STACK_SIZE - (XCHAL_NUM_AREGS-16)*4) - 1)
 # define user_mode(regs) (((regs)->ps & 0x00000020)!=0)
diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S
index 80d24c485fd3..77fc9f6dc016 100644
--- a/arch/xtensa/kernel/entry.S
+++ b/arch/xtensa/kernel/entry.S
@@ -104,7 +104,7 @@
  *   excsave has been restored, and
  *   stack pointer (a1) has been set.
  *
- * Note: _user_exception might be at an odd adress. Don't use call0..call12
+ * Note: _user_exception might be at an odd address. Don't use call0..call12
  */
 
 ENTRY(user_exception)
@@ -244,7 +244,7 @@ _user_exception:
  *   excsave has been restored, and
  *   stack pointer (a1) has been set.
  *
- * Note: _kernel_exception might be at an odd adress. Don't use call0..call12
+ * Note: _kernel_exception might be at an odd address. Don't use call0..call12
  */
 
 ENTRY(kernel_exception)
diff --git a/arch/xtensa/kernel/ptrace.c b/arch/xtensa/kernel/ptrace.c
index 9486882ef0af..9d4e1ceb3f09 100644
--- a/arch/xtensa/kernel/ptrace.c
+++ b/arch/xtensa/kernel/ptrace.c
@@ -30,6 +30,17 @@
 #include <asm/elf.h>
 #include <asm/coprocessor.h>
 
+
+void user_enable_single_step(struct task_struct *child)
+{
+	child->ptrace |= PT_SINGLESTEP;
+}
+
+void user_disable_single_step(struct task_struct *child)
+{
+	child->ptrace &= ~PT_SINGLESTEP;
+}
+
 /*
  * Called by kernel/ptrace.c when detaching to disable single stepping.
  */
@@ -268,51 +279,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		ret = ptrace_pokeusr(child, addr, data);
 		break;
 
-	/* continue and stop at next (return from) syscall */
-
-	case PTRACE_SYSCALL:
-	case PTRACE_CONT: /* restart after signal. */
-	{
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		if (request == PTRACE_SYSCALL)
-			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		else
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		child->exit_code = data;
-		/* Make sure the single step bit is not set. */
-		child->ptrace &= ~PT_SINGLESTEP;
-		wake_up_process(child);
-		ret = 0;
-		break;
-	}
-
-	/*
-	 * make the child exit.  Best I can do is send it a sigkill.
-	 * perhaps it should be put in the status that it wants to
-	 * exit.
-	 */
-	case PTRACE_KILL:
-		ret = 0;
-		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
-			break;
-		child->exit_code = SIGKILL;
-		child->ptrace &= ~PT_SINGLESTEP;
-		wake_up_process(child);
-		break;
-
-	case PTRACE_SINGLESTEP:
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		child->ptrace |= PT_SINGLESTEP;
-		child->exit_code = data;
-		wake_up_process(child);
-		ret = 0;
-		break;
-
 	case PTRACE_GETREGS:
 		ret = ptrace_getregs(child, (void __user *) data);
 		break;
diff --git a/block/Kconfig b/block/Kconfig
index e20fbde0875c..62a5921321cd 100644
--- a/block/Kconfig
+++ b/block/Kconfig
@@ -78,7 +78,7 @@ config BLK_DEV_INTEGRITY
 	Protection.  If in doubt, say N.
 
 config BLK_CGROUP
-	bool
+	tristate
 	depends on CGROUPS
 	default n
 	---help---
diff --git a/block/Kconfig.iosched b/block/Kconfig.iosched
index b71abfb0d726..fc71cf071fb2 100644
--- a/block/Kconfig.iosched
+++ b/block/Kconfig.iosched
@@ -23,6 +23,7 @@ config IOSCHED_DEADLINE
 
 config IOSCHED_CFQ
 	tristate "CFQ I/O scheduler"
+	select BLK_CGROUP if CFQ_GROUP_IOSCHED
 	default y
 	---help---
 	  The CFQ I/O scheduler tries to distribute bandwidth equally
@@ -35,7 +36,6 @@ config IOSCHED_CFQ
 config CFQ_GROUP_IOSCHED
 	bool "CFQ Group Scheduling support"
 	depends on IOSCHED_CFQ && CGROUPS
-	select BLK_CGROUP
 	default n
 	---help---
 	  Enable group IO scheduling in CFQ.
diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c
index c85d74cae200..4b686ad08eaa 100644
--- a/block/blk-cgroup.c
+++ b/block/blk-cgroup.c
@@ -23,6 +23,31 @@ static LIST_HEAD(blkio_list);
 struct blkio_cgroup blkio_root_cgroup = { .weight = 2*BLKIO_WEIGHT_DEFAULT };
 EXPORT_SYMBOL_GPL(blkio_root_cgroup);
 
+static struct cgroup_subsys_state *blkiocg_create(struct cgroup_subsys *,
+						  struct cgroup *);
+static int blkiocg_can_attach(struct cgroup_subsys *, struct cgroup *,
+			      struct task_struct *, bool);
+static void blkiocg_attach(struct cgroup_subsys *, struct cgroup *,
+			   struct cgroup *, struct task_struct *, bool);
+static void blkiocg_destroy(struct cgroup_subsys *, struct cgroup *);
+static int blkiocg_populate(struct cgroup_subsys *, struct cgroup *);
+
+struct cgroup_subsys blkio_subsys = {
+	.name = "blkio",
+	.create = blkiocg_create,
+	.can_attach = blkiocg_can_attach,
+	.attach = blkiocg_attach,
+	.destroy = blkiocg_destroy,
+	.populate = blkiocg_populate,
+#ifdef CONFIG_BLK_CGROUP
+	/* note: blkio_subsys_id is otherwise defined in blk-cgroup.h */
+	.subsys_id = blkio_subsys_id,
+#endif
+	.use_id = 1,
+	.module = THIS_MODULE,
+};
+EXPORT_SYMBOL_GPL(blkio_subsys);
+
 struct blkio_cgroup *cgroup_to_blkio_cgroup(struct cgroup *cgroup)
 {
 	return container_of(cgroup_subsys_state(cgroup, blkio_subsys_id),
@@ -253,7 +278,8 @@ remove_entry:
 done:
 	free_css_id(&blkio_subsys, &blkcg->css);
 	rcu_read_unlock();
-	kfree(blkcg);
+	if (blkcg != &blkio_root_cgroup)
+		kfree(blkcg);
 }
 
 static struct cgroup_subsys_state *
@@ -319,17 +345,6 @@ static void blkiocg_attach(struct cgroup_subsys *subsys, struct cgroup *cgroup,
 	task_unlock(tsk);
 }
 
-struct cgroup_subsys blkio_subsys = {
-	.name = "blkio",
-	.create = blkiocg_create,
-	.can_attach = blkiocg_can_attach,
-	.attach = blkiocg_attach,
-	.destroy = blkiocg_destroy,
-	.populate = blkiocg_populate,
-	.subsys_id = blkio_subsys_id,
-	.use_id = 1,
-};
-
 void blkio_policy_register(struct blkio_policy_type *blkiop)
 {
 	spin_lock(&blkio_list_lock);
@@ -345,3 +360,17 @@ void blkio_policy_unregister(struct blkio_policy_type *blkiop)
 	spin_unlock(&blkio_list_lock);
 }
 EXPORT_SYMBOL_GPL(blkio_policy_unregister);
+
+static int __init init_cgroup_blkio(void)
+{
+	return cgroup_load_subsys(&blkio_subsys);
+}
+
+static void __exit exit_cgroup_blkio(void)
+{
+	cgroup_unload_subsys(&blkio_subsys);
+}
+
+module_init(init_cgroup_blkio);
+module_exit(exit_cgroup_blkio);
+MODULE_LICENSE("GPL");
diff --git a/block/blk-cgroup.h b/block/blk-cgroup.h
index 84bf745fa775..8ccc20464dae 100644
--- a/block/blk-cgroup.h
+++ b/block/blk-cgroup.h
@@ -15,7 +15,13 @@
 
 #include <linux/cgroup.h>
 
-#ifdef CONFIG_BLK_CGROUP
+#if defined(CONFIG_BLK_CGROUP) || defined(CONFIG_BLK_CGROUP_MODULE)
+
+#ifndef CONFIG_BLK_CGROUP
+/* When blk-cgroup is a module, its subsys_id isn't a compile-time constant */
+extern struct cgroup_subsys blkio_subsys;
+#define blkio_subsys_id blkio_subsys.subsys_id
+#endif
 
 struct blkio_cgroup {
 	struct cgroup_subsys_state css;
@@ -91,7 +97,7 @@ static inline void blkiocg_update_blkio_group_dequeue_stats(
 			struct blkio_group *blkg, unsigned long dequeue) {}
 #endif
 
-#ifdef CONFIG_BLK_CGROUP
+#if defined(CONFIG_BLK_CGROUP) || defined(CONFIG_BLK_CGROUP_MODULE)
 extern struct blkio_cgroup blkio_root_cgroup;
 extern struct blkio_cgroup *cgroup_to_blkio_cgroup(struct cgroup *cgroup);
 extern void blkiocg_add_blkio_group(struct blkio_cgroup *blkcg,
diff --git a/block/blk-integrity.c b/block/blk-integrity.c
index 15c630813b1c..96e83c2bdb94 100644
--- a/block/blk-integrity.c
+++ b/block/blk-integrity.c
@@ -278,7 +278,7 @@ static struct attribute *integrity_attrs[] = {
 	NULL,
 };
 
-static struct sysfs_ops integrity_ops = {
+static const struct sysfs_ops integrity_ops = {
 	.show	= &integrity_attr_show,
 	.store	= &integrity_attr_store,
 };
diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
index e85442415db3..2ae2cb3f362f 100644
--- a/block/blk-sysfs.c
+++ b/block/blk-sysfs.c
@@ -450,7 +450,7 @@ static void blk_release_queue(struct kobject *kobj)
 	kmem_cache_free(blk_requestq_cachep, q);
 }
 
-static struct sysfs_ops queue_sysfs_ops = {
+static const struct sysfs_ops queue_sysfs_ops = {
 	.show	= queue_attr_show,
 	.store	= queue_attr_store,
 };
diff --git a/block/bsg.c b/block/bsg.c
index a9fd2d84b53a..46597a6bd112 100644
--- a/block/bsg.c
+++ b/block/bsg.c
@@ -260,7 +260,7 @@ bsg_map_hdr(struct bsg_device *bd, struct sg_io_v4 *hdr, fmode_t has_write_perm,
 		return ERR_PTR(ret);
 
 	/*
-	 * map scatter-gather elements seperately and string them to request
+	 * map scatter-gather elements separately and string them to request
 	 */
 	rq = blk_get_request(q, rw, GFP_KERNEL);
 	if (!rq)
diff --git a/block/elevator.c b/block/elevator.c
index ee3a883840f2..df75676f6671 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -892,7 +892,7 @@ elv_attr_store(struct kobject *kobj, struct attribute *attr,
 	return error;
 }
 
-static struct sysfs_ops elv_sysfs_ops = {
+static const struct sysfs_ops elv_sysfs_ops = {
 	.show	= elv_attr_show,
 	.store	= elv_attr_store,
 };
diff --git a/crypto/Kconfig b/crypto/Kconfig
index 6a2e295ee227..403857ad06d4 100644
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
@@ -826,8 +826,8 @@ config CRYPTO_ANSI_CPRNG
 	help
 	  This option enables the generic pseudo random number generator
 	  for cryptographic modules.  Uses the Algorithm specified in
-	  ANSI X9.31 A.2.4. Not this option must be enabled if CRYPTO_FIPS 
-	  is selected
+	  ANSI X9.31 A.2.4. Note that this option must be enabled if
+	  CRYPTO_FIPS is selected
 
 source "drivers/crypto/Kconfig"
 
diff --git a/drivers/Makefile b/drivers/Makefile
index 81e36596b1e9..34f1e1064dbc 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -99,6 +99,7 @@ obj-$(CONFIG_SGI_SN)		+= sn/
 obj-y				+= firmware/
 obj-$(CONFIG_CRYPTO)		+= crypto/
 obj-$(CONFIG_SUPERH)		+= sh/
+obj-$(CONFIG_ARCH_SHMOBILE)	+= sh/
 obj-$(CONFIG_GENERIC_TIME)	+= clocksource/
 obj-$(CONFIG_DMA_ENGINE)	+= dma/
 obj-$(CONFIG_DCA)		+= dca/
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 66cc3f36a954..a8d8998dd5c5 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -32,7 +32,7 @@ acpi-$(CONFIG_ACPI_SLEEP)	+= proc.o
 #
 acpi-y				+= bus.o glue.o
 acpi-y				+= scan.o
-acpi-y				+= processor_pdc.o
+acpi-y				+= processor_core.o
 acpi-y				+= ec.o
 acpi-$(CONFIG_ACPI_DOCK)	+= dock.o
 acpi-y				+= pci_root.o pci_link.o pci_irq.o pci_bind.o
@@ -61,7 +61,7 @@ obj-$(CONFIG_ACPI_SBS)		+= sbs.o
 obj-$(CONFIG_ACPI_POWER_METER)	+= power_meter.o
 
 # processor has its own "processor." module_param namespace
-processor-y			:= processor_core.o processor_throttling.o
+processor-y			:= processor_driver.o processor_throttling.o
 processor-y			+= processor_idle.o processor_thermal.o
 processor-$(CONFIG_CPU_FREQ)	+= processor_perflib.o
 
diff --git a/drivers/acpi/acpica/exmutex.c b/drivers/acpi/acpica/exmutex.c
index cc8a10268f68..7116bc86494d 100644
--- a/drivers/acpi/acpica/exmutex.c
+++ b/drivers/acpi/acpica/exmutex.c
@@ -375,8 +375,7 @@ acpi_ex_release_mutex(union acpi_operand_object *obj_desc,
 		return_ACPI_STATUS(AE_AML_MUTEX_NOT_ACQUIRED);
 	}
 
-	/* Must have a valid thread ID */
-
+	/* Must have a valid thread. */
 	if (!walk_state->thread) {
 		ACPI_ERROR((AE_INFO,
 			    "Cannot release Mutex [%4.4s], null thread info",
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index 58d2c91ba62b..75f39f2c166d 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -54,6 +54,7 @@
 #define ACPI_BATTERY_DEVICE_NAME	"Battery"
 #define ACPI_BATTERY_NOTIFY_STATUS	0x80
 #define ACPI_BATTERY_NOTIFY_INFO	0x81
+#define ACPI_BATTERY_NOTIFY_THRESHOLD   0x82
 
 #define _COMPONENT		ACPI_BATTERY_COMPONENT
 
@@ -88,10 +89,15 @@ static const struct acpi_device_id battery_device_ids[] = {
 
 MODULE_DEVICE_TABLE(acpi, battery_device_ids);
 
-/* For buggy DSDTs that report negative 16-bit values for either charging
- * or discharging current and/or report 0 as 65536 due to bad math.
- */
-#define QUIRK_SIGNED16_CURRENT 0x0001
+enum {
+	ACPI_BATTERY_ALARM_PRESENT,
+	ACPI_BATTERY_XINFO_PRESENT,
+	/* For buggy DSDTs that report negative 16-bit values for either
+	 * charging or discharging current and/or report 0 as 65536
+	 * due to bad math.
+	 */
+	ACPI_BATTERY_QUIRK_SIGNED16_CURRENT,
+};
 
 struct acpi_battery {
 	struct mutex lock;
@@ -109,6 +115,12 @@ struct acpi_battery {
 	int design_voltage;
 	int design_capacity_warning;
 	int design_capacity_low;
+	int cycle_count;
+	int measurement_accuracy;
+	int max_sampling_time;
+	int min_sampling_time;
+	int max_averaging_interval;
+	int min_averaging_interval;
 	int capacity_granularity_1;
 	int capacity_granularity_2;
 	int alarm;
@@ -118,8 +130,7 @@ struct acpi_battery {
 	char oem_info[32];
 	int state;
 	int power_unit;
-	u8 alarm_present;
-	long quirks;
+	unsigned long flags;
 };
 
 #define to_acpi_battery(x) container_of(x, struct acpi_battery, bat);
@@ -198,6 +209,9 @@ static int acpi_battery_get_property(struct power_supply *psy,
 	case POWER_SUPPLY_PROP_TECHNOLOGY:
 		val->intval = acpi_battery_technology(battery);
 		break;
+	case POWER_SUPPLY_PROP_CYCLE_COUNT:
+		val->intval = battery->cycle_count;
+		break;
 	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
 		val->intval = battery->design_voltage * 1000;
 		break;
@@ -239,6 +253,7 @@ static enum power_supply_property charge_battery_props[] = {
 	POWER_SUPPLY_PROP_STATUS,
 	POWER_SUPPLY_PROP_PRESENT,
 	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_CYCLE_COUNT,
 	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
 	POWER_SUPPLY_PROP_VOLTAGE_NOW,
 	POWER_SUPPLY_PROP_CURRENT_NOW,
@@ -254,6 +269,7 @@ static enum power_supply_property energy_battery_props[] = {
 	POWER_SUPPLY_PROP_STATUS,
 	POWER_SUPPLY_PROP_PRESENT,
 	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_CYCLE_COUNT,
 	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
 	POWER_SUPPLY_PROP_VOLTAGE_NOW,
 	POWER_SUPPLY_PROP_CURRENT_NOW,
@@ -305,6 +321,28 @@ static struct acpi_offsets info_offsets[] = {
 	{offsetof(struct acpi_battery, oem_info), 1},
 };
 
+static struct acpi_offsets extended_info_offsets[] = {
+	{offsetof(struct acpi_battery, power_unit), 0},
+	{offsetof(struct acpi_battery, design_capacity), 0},
+	{offsetof(struct acpi_battery, full_charge_capacity), 0},
+	{offsetof(struct acpi_battery, technology), 0},
+	{offsetof(struct acpi_battery, design_voltage), 0},
+	{offsetof(struct acpi_battery, design_capacity_warning), 0},
+	{offsetof(struct acpi_battery, design_capacity_low), 0},
+	{offsetof(struct acpi_battery, cycle_count), 0},
+	{offsetof(struct acpi_battery, measurement_accuracy), 0},
+	{offsetof(struct acpi_battery, max_sampling_time), 0},
+	{offsetof(struct acpi_battery, min_sampling_time), 0},
+	{offsetof(struct acpi_battery, max_averaging_interval), 0},
+	{offsetof(struct acpi_battery, min_averaging_interval), 0},
+	{offsetof(struct acpi_battery, capacity_granularity_1), 0},
+	{offsetof(struct acpi_battery, capacity_granularity_2), 0},
+	{offsetof(struct acpi_battery, model_number), 1},
+	{offsetof(struct acpi_battery, serial_number), 1},
+	{offsetof(struct acpi_battery, type), 1},
+	{offsetof(struct acpi_battery, oem_info), 1},
+};
+
 static int extract_package(struct acpi_battery *battery,
 			   union acpi_object *package,
 			   struct acpi_offsets *offsets, int num)
@@ -350,22 +388,29 @@ static int acpi_battery_get_info(struct acpi_battery *battery)
 {
 	int result = -EFAULT;
 	acpi_status status = 0;
+	char *name = test_bit(ACPI_BATTERY_XINFO_PRESENT, &battery->flags)?
+			"_BIX" : "_BIF";
+
 	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
 
 	if (!acpi_battery_present(battery))
 		return 0;
 	mutex_lock(&battery->lock);
-	status = acpi_evaluate_object(battery->device->handle, "_BIF",
-				      NULL, &buffer);
+	status = acpi_evaluate_object(battery->device->handle, name,
+						NULL, &buffer);
 	mutex_unlock(&battery->lock);
 
 	if (ACPI_FAILURE(status)) {
-		ACPI_EXCEPTION((AE_INFO, status, "Evaluating _BIF"));
+		ACPI_EXCEPTION((AE_INFO, status, "Evaluating %s", name));
 		return -ENODEV;
 	}
-
-	result = extract_package(battery, buffer.pointer,
-				 info_offsets, ARRAY_SIZE(info_offsets));
+	if (test_bit(ACPI_BATTERY_XINFO_PRESENT, &battery->flags))
+		result = extract_package(battery, buffer.pointer,
+				extended_info_offsets,
+				ARRAY_SIZE(extended_info_offsets));
+	else
+		result = extract_package(battery, buffer.pointer,
+				info_offsets, ARRAY_SIZE(info_offsets));
 	kfree(buffer.pointer);
 	return result;
 }
@@ -399,7 +444,7 @@ static int acpi_battery_get_state(struct acpi_battery *battery)
 	battery->update_time = jiffies;
 	kfree(buffer.pointer);
 
-	if ((battery->quirks & QUIRK_SIGNED16_CURRENT) &&
+	if (test_bit(ACPI_BATTERY_QUIRK_SIGNED16_CURRENT, &battery->flags) &&
 	    battery->rate_now != -1)
 		battery->rate_now = abs((s16)battery->rate_now);
 
@@ -412,7 +457,8 @@ static int acpi_battery_set_alarm(struct acpi_battery *battery)
 	union acpi_object arg0 = { .type = ACPI_TYPE_INTEGER };
 	struct acpi_object_list arg_list = { 1, &arg0 };
 
-	if (!acpi_battery_present(battery)|| !battery->alarm_present)
+	if (!acpi_battery_present(battery) ||
+	    !test_bit(ACPI_BATTERY_ALARM_PRESENT, &battery->flags))
 		return -ENODEV;
 
 	arg0.integer.value = battery->alarm;
@@ -437,10 +483,10 @@ static int acpi_battery_init_alarm(struct acpi_battery *battery)
 	/* See if alarms are supported, and if so, set default */
 	status = acpi_get_handle(battery->device->handle, "_BTP", &handle);
 	if (ACPI_FAILURE(status)) {
-		battery->alarm_present = 0;
+		clear_bit(ACPI_BATTERY_ALARM_PRESENT, &battery->flags);
 		return 0;
 	}
-	battery->alarm_present = 1;
+	set_bit(ACPI_BATTERY_ALARM_PRESENT, &battery->flags);
 	if (!battery->alarm)
 		battery->alarm = battery->design_capacity_warning;
 	return acpi_battery_set_alarm(battery);
@@ -510,9 +556,8 @@ static void sysfs_remove_battery(struct acpi_battery *battery)
 
 static void acpi_battery_quirks(struct acpi_battery *battery)
 {
-	battery->quirks = 0;
 	if (dmi_name_in_vendors("Acer") && battery->power_unit) {
-		battery->quirks |= QUIRK_SIGNED16_CURRENT;
+		set_bit(ACPI_BATTERY_QUIRK_SIGNED16_CURRENT, &battery->flags);
 	}
 }
 
@@ -590,6 +635,7 @@ static int acpi_battery_print_info(struct seq_file *seq, int result)
 	seq_printf(seq, "design capacity low:     %d %sh\n",
 		   battery->design_capacity_low,
 		   acpi_battery_units(battery));
+	seq_printf(seq, "cycle count:		  %i\n", battery->cycle_count);
 	seq_printf(seq, "capacity granularity 1:  %d %sh\n",
 		   battery->capacity_granularity_1,
 		   acpi_battery_units(battery));
@@ -841,6 +887,7 @@ static int acpi_battery_add(struct acpi_device *device)
 {
 	int result = 0;
 	struct acpi_battery *battery = NULL;
+	acpi_handle handle;
 	if (!device)
 		return -EINVAL;
 	battery = kzalloc(sizeof(struct acpi_battery), GFP_KERNEL);
@@ -851,6 +898,9 @@ static int acpi_battery_add(struct acpi_device *device)
 	strcpy(acpi_device_class(device), ACPI_BATTERY_CLASS);
 	device->driver_data = battery;
 	mutex_init(&battery->lock);
+	if (ACPI_SUCCESS(acpi_get_handle(battery->device->handle,
+			"_BIX", &handle)))
+		set_bit(ACPI_BATTERY_XINFO_PRESENT, &battery->flags);
 	acpi_battery_update(battery);
 #ifdef CONFIG_ACPI_PROCFS_POWER
 	result = acpi_battery_add_fs(device);
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index a52126e46307..b70cd3756142 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -190,16 +190,16 @@ int acpi_bus_get_power(acpi_handle handle, int *state)
 		 * Get the device's power state either directly (via _PSC) or
 		 * indirectly (via power resources).
 		 */
-		if (device->power.flags.explicit_get) {
+		if (device->power.flags.power_resources) {
+			result = acpi_power_get_inferred_state(device);
+			if (result)
+				return result;
+		} else if (device->power.flags.explicit_get) {
 			status = acpi_evaluate_integer(device->handle, "_PSC",
 						       NULL, &psc);
 			if (ACPI_FAILURE(status))
 				return -ENODEV;
 			device->power.state = (int)psc;
-		} else if (device->power.flags.power_resources) {
-			result = acpi_power_get_inferred_state(device);
-			if (result)
-				return result;
 		}
 
 		*state = device->power.state;
diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c
index b2586f57e1f5..d9a85f1ddde6 100644
--- a/drivers/acpi/dock.c
+++ b/drivers/acpi/dock.c
@@ -605,7 +605,7 @@ register_hotplug_dock_device(acpi_handle handle, struct acpi_dock_ops *ops,
 	list_for_each_entry(dock_station, &dock_stations, sibling) {
 		/*
 		 * An ATA bay can be in a dock and itself can be ejected
-		 * seperately, so there are two 'dock stations' which need the
+		 * separately, so there are two 'dock stations' which need the
 		 * ops
 		 */
 		dd = find_dock_dependent_device(dock_station, handle);
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index d7a6bbbb834c..1ac28c6a672e 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -76,8 +76,9 @@ enum ec_command {
 enum {
 	EC_FLAGS_QUERY_PENDING,		/* Query is pending */
 	EC_FLAGS_GPE_STORM,		/* GPE storm detected */
-	EC_FLAGS_HANDLERS_INSTALLED	/* Handlers for GPE and
+	EC_FLAGS_HANDLERS_INSTALLED,	/* Handlers for GPE and
 					 * OpReg are installed */
+	EC_FLAGS_FROZEN,		/* Transactions are suspended */
 };
 
 /* If we find an EC via the ECDT, we need to keep a ptr to its context */
@@ -291,6 +292,10 @@ static int acpi_ec_transaction(struct acpi_ec *ec, struct transaction *t)
 	if (t->rdata)
 		memset(t->rdata, 0, t->rlen);
 	mutex_lock(&ec->lock);
+	if (test_bit(EC_FLAGS_FROZEN, &ec->flags)) {
+		status = -EINVAL;
+		goto unlock;
+	}
 	if (ec->global_lock) {
 		status = acpi_acquire_global_lock(ACPI_EC_UDELAY_GLK, &glk);
 		if (ACPI_FAILURE(status)) {
@@ -453,6 +458,32 @@ int ec_transaction(u8 command,
 
 EXPORT_SYMBOL(ec_transaction);
 
+void acpi_ec_suspend_transactions(void)
+{
+	struct acpi_ec *ec = first_ec;
+
+	if (!ec)
+		return;
+
+	mutex_lock(&ec->lock);
+	/* Prevent transactions from being carried out */
+	set_bit(EC_FLAGS_FROZEN, &ec->flags);
+	mutex_unlock(&ec->lock);
+}
+
+void acpi_ec_resume_transactions(void)
+{
+	struct acpi_ec *ec = first_ec;
+
+	if (!ec)
+		return;
+
+	mutex_lock(&ec->lock);
+	/* Allow transactions to be carried out again */
+	clear_bit(EC_FLAGS_FROZEN, &ec->flags);
+	mutex_unlock(&ec->lock);
+}
+
 static int acpi_ec_query_unlocked(struct acpi_ec *ec, u8 * data)
 {
 	int result;
diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h
index 9c4c962e46e3..e28411367239 100644
--- a/drivers/acpi/internal.h
+++ b/drivers/acpi/internal.h
@@ -49,6 +49,8 @@ void acpi_early_processor_set_pdc(void);
 int acpi_ec_init(void);
 int acpi_ec_ecdt_probe(void);
 int acpi_boot_ec_enable(void);
+void acpi_ec_suspend_transactions(void);
+void acpi_ec_resume_transactions(void);
 
 /*--------------------------------------------------------------------------
                                   Suspend/Resume
diff --git a/drivers/acpi/proc.c b/drivers/acpi/proc.c
index d0d25e2e1ced..1ac678d2c51c 100644
--- a/drivers/acpi/proc.c
+++ b/drivers/acpi/proc.c
@@ -435,7 +435,7 @@ acpi_system_write_wakeup_device(struct file *file,
 				found_dev->wakeup.gpe_device)) {
 				printk(KERN_WARNING
 				       "ACPI: '%s' and '%s' have the same GPE, "
-				       "can't disable/enable one seperately\n",
+				       "can't disable/enable one separately\n",
 				       dev->pnp.bus_id, found_dev->pnp.bus_id);
 				dev->wakeup.state.enabled =
 				    found_dev->wakeup.state.enabled;
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index e9b7b402dbfb..791ac7b0f8df 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -1,383 +1,62 @@
 /*
- * acpi_processor.c - ACPI Processor Driver ($Revision: 71 $)
+ * Copyright (C) 2005 Intel Corporation
+ * Copyright (C) 2009 Hewlett-Packard Development Company, L.P.
  *
- *  Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
- *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
- *  Copyright (C) 2004       Dominik Brodowski <linux@brodo.de>
- *  Copyright (C) 2004  Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
- *  			- Added processor hotplug support
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or (at
- *  your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful, but
- *  WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- *  General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *  TBD:
- *	1. Make # power states dynamic.
- *	2. Support duty_cycle values that span bit 4.
- *	3. Optimize by having scheduler determine business instead of
- *	   having us try to calculate it here.
- *	4. Need C1 timing -- must modify kernel (IRQ handler) to get this.
+ *	Alex Chiang <achiang@hp.com>
+ *	- Unified x86/ia64 implementations
+ *	Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
+ *	- Added _PDC for platforms with Intel CPUs
  */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/pm.h>
-#include <linux/cpufreq.h>
-#include <linux/cpu.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
 #include <linux/dmi.h>
-#include <linux/moduleparam.h>
-#include <linux/cpuidle.h>
 
-#include <asm/io.h>
-#include <asm/system.h>
-#include <asm/cpu.h>
-#include <asm/delay.h>
-#include <asm/uaccess.h>
-#include <asm/processor.h>
-#include <asm/smp.h>
-#include <asm/acpi.h>
-
-#include <acpi/acpi_bus.h>
 #include <acpi/acpi_drivers.h>
 #include <acpi/processor.h>
 
-#define PREFIX "ACPI: "
-
-#define ACPI_PROCESSOR_CLASS		"processor"
-#define ACPI_PROCESSOR_DEVICE_NAME	"Processor"
-#define ACPI_PROCESSOR_FILE_INFO	"info"
-#define ACPI_PROCESSOR_FILE_THROTTLING	"throttling"
-#define ACPI_PROCESSOR_FILE_LIMIT	"limit"
-#define ACPI_PROCESSOR_NOTIFY_PERFORMANCE 0x80
-#define ACPI_PROCESSOR_NOTIFY_POWER	0x81
-#define ACPI_PROCESSOR_NOTIFY_THROTTLING	0x82
-
-#define ACPI_PROCESSOR_LIMIT_USER	0
-#define ACPI_PROCESSOR_LIMIT_THERMAL	1
+#include "internal.h"
 
+#define PREFIX			"ACPI: "
 #define _COMPONENT		ACPI_PROCESSOR_COMPONENT
 ACPI_MODULE_NAME("processor_core");
 
-MODULE_AUTHOR("Paul Diefenbaugh");
-MODULE_DESCRIPTION("ACPI Processor Driver");
-MODULE_LICENSE("GPL");
-
-static int acpi_processor_add(struct acpi_device *device);
-static int acpi_processor_remove(struct acpi_device *device, int type);
-#ifdef CONFIG_ACPI_PROCFS
-static int acpi_processor_info_open_fs(struct inode *inode, struct file *file);
-#endif
-static void acpi_processor_notify(struct acpi_device *device, u32 event);
-static acpi_status acpi_processor_hotadd_init(acpi_handle handle, int *p_cpu);
-static int acpi_processor_handle_eject(struct acpi_processor *pr);
-
-
-static const struct acpi_device_id processor_device_ids[] = {
-	{ACPI_PROCESSOR_OBJECT_HID, 0},
-	{"ACPI0007", 0},
-	{"", 0},
-};
-MODULE_DEVICE_TABLE(acpi, processor_device_ids);
-
-static struct acpi_driver acpi_processor_driver = {
-	.name = "processor",
-	.class = ACPI_PROCESSOR_CLASS,
-	.ids = processor_device_ids,
-	.ops = {
-		.add = acpi_processor_add,
-		.remove = acpi_processor_remove,
-		.suspend = acpi_processor_suspend,
-		.resume = acpi_processor_resume,
-		.notify = acpi_processor_notify,
-		},
-};
-
-#define INSTALL_NOTIFY_HANDLER		1
-#define UNINSTALL_NOTIFY_HANDLER	2
-#ifdef CONFIG_ACPI_PROCFS
-static const struct file_operations acpi_processor_info_fops = {
-	.owner = THIS_MODULE,
-	.open = acpi_processor_info_open_fs,
-	.read = seq_read,
-	.llseek = seq_lseek,
-	.release = single_release,
-};
-#endif
-
-DEFINE_PER_CPU(struct acpi_processor *, processors);
-EXPORT_PER_CPU_SYMBOL(processors);
-
-struct acpi_processor_errata errata __read_mostly;
-
-/* --------------------------------------------------------------------------
-                                Errata Handling
-   -------------------------------------------------------------------------- */
-
-static int acpi_processor_errata_piix4(struct pci_dev *dev)
+static int set_no_mwait(const struct dmi_system_id *id)
 {
-	u8 value1 = 0;
-	u8 value2 = 0;
-
-
-	if (!dev)
-		return -EINVAL;
-
-	/*
-	 * Note that 'dev' references the PIIX4 ACPI Controller.
-	 */
-
-	switch (dev->revision) {
-	case 0:
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4 A-step\n"));
-		break;
-	case 1:
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4 B-step\n"));
-		break;
-	case 2:
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4E\n"));
-		break;
-	case 3:
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4M\n"));
-		break;
-	default:
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found unknown PIIX4\n"));
-		break;
-	}
-
-	switch (dev->revision) {
-
-	case 0:		/* PIIX4 A-step */
-	case 1:		/* PIIX4 B-step */
-		/*
-		 * See specification changes #13 ("Manual Throttle Duty Cycle")
-		 * and #14 ("Enabling and Disabling Manual Throttle"), plus
-		 * erratum #5 ("STPCLK# Deassertion Time") from the January
-		 * 2002 PIIX4 specification update.  Applies to only older
-		 * PIIX4 models.
-		 */
-		errata.piix4.throttle = 1;
-
-	case 2:		/* PIIX4E */
-	case 3:		/* PIIX4M */
-		/*
-		 * See erratum #18 ("C3 Power State/BMIDE and Type-F DMA
-		 * Livelock") from the January 2002 PIIX4 specification update.
-		 * Applies to all PIIX4 models.
-		 */
-
-		/*
-		 * BM-IDE
-		 * ------
-		 * Find the PIIX4 IDE Controller and get the Bus Master IDE
-		 * Status register address.  We'll use this later to read
-		 * each IDE controller's DMA status to make sure we catch all
-		 * DMA activity.
-		 */
-		dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
-				     PCI_DEVICE_ID_INTEL_82371AB,
-				     PCI_ANY_ID, PCI_ANY_ID, NULL);
-		if (dev) {
-			errata.piix4.bmisx = pci_resource_start(dev, 4);
-			pci_dev_put(dev);
-		}
-
-		/*
-		 * Type-F DMA
-		 * ----------
-		 * Find the PIIX4 ISA Controller and read the Motherboard
-		 * DMA controller's status to see if Type-F (Fast) DMA mode
-		 * is enabled (bit 7) on either channel.  Note that we'll
-		 * disable C3 support if this is enabled, as some legacy
-		 * devices won't operate well if fast DMA is disabled.
-		 */
-		dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
-				     PCI_DEVICE_ID_INTEL_82371AB_0,
-				     PCI_ANY_ID, PCI_ANY_ID, NULL);
-		if (dev) {
-			pci_read_config_byte(dev, 0x76, &value1);
-			pci_read_config_byte(dev, 0x77, &value2);
-			if ((value1 & 0x80) || (value2 & 0x80))
-				errata.piix4.fdma = 1;
-			pci_dev_put(dev);
-		}
-
-		break;
-	}
-
-	if (errata.piix4.bmisx)
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "Bus master activity detection (BM-IDE) erratum enabled\n"));
-	if (errata.piix4.fdma)
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "Type-F DMA livelock erratum (C3 disabled)\n"));
-
+	printk(KERN_NOTICE PREFIX "%s detected - "
+		"disabling mwait for CPU C-states\n", id->ident);
+	idle_nomwait = 1;
 	return 0;
 }
 
-static int acpi_processor_errata(struct acpi_processor *pr)
-{
-	int result = 0;
-	struct pci_dev *dev = NULL;
-
-
-	if (!pr)
-		return -EINVAL;
-
-	/*
-	 * PIIX4
-	 */
-	dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
-			     PCI_DEVICE_ID_INTEL_82371AB_3, PCI_ANY_ID,
-			     PCI_ANY_ID, NULL);
-	if (dev) {
-		result = acpi_processor_errata_piix4(dev);
-		pci_dev_put(dev);
-	}
-
-	return result;
-}
-
-/* --------------------------------------------------------------------------
-                              FS Interface (/proc)
-   -------------------------------------------------------------------------- */
-
-#ifdef CONFIG_ACPI_PROCFS
-static struct proc_dir_entry *acpi_processor_dir = NULL;
-
-static int acpi_processor_info_seq_show(struct seq_file *seq, void *offset)
-{
-	struct acpi_processor *pr = seq->private;
-
-
-	if (!pr)
-		goto end;
-
-	seq_printf(seq, "processor id:            %d\n"
-		   "acpi id:                 %d\n"
-		   "bus mastering control:   %s\n"
-		   "power management:        %s\n"
-		   "throttling control:      %s\n"
-		   "limit interface:         %s\n",
-		   pr->id,
-		   pr->acpi_id,
-		   pr->flags.bm_control ? "yes" : "no",
-		   pr->flags.power ? "yes" : "no",
-		   pr->flags.throttling ? "yes" : "no",
-		   pr->flags.limit ? "yes" : "no");
-
-      end:
-	return 0;
-}
-
-static int acpi_processor_info_open_fs(struct inode *inode, struct file *file)
-{
-	return single_open(file, acpi_processor_info_seq_show,
-			   PDE(inode)->data);
-}
-
-static int __cpuinit acpi_processor_add_fs(struct acpi_device *device)
-{
-	struct proc_dir_entry *entry = NULL;
-
-
-	if (!acpi_device_dir(device)) {
-		acpi_device_dir(device) = proc_mkdir(acpi_device_bid(device),
-						     acpi_processor_dir);
-		if (!acpi_device_dir(device))
-			return -ENODEV;
-	}
-
-	/* 'info' [R] */
-	entry = proc_create_data(ACPI_PROCESSOR_FILE_INFO,
-				 S_IRUGO, acpi_device_dir(device),
-				 &acpi_processor_info_fops,
-				 acpi_driver_data(device));
-	if (!entry)
-		return -EIO;
-
-	/* 'throttling' [R/W] */
-	entry = proc_create_data(ACPI_PROCESSOR_FILE_THROTTLING,
-				 S_IFREG | S_IRUGO | S_IWUSR,
-				 acpi_device_dir(device),
-				 &acpi_processor_throttling_fops,
-				 acpi_driver_data(device));
-	if (!entry)
-		return -EIO;
-
-	/* 'limit' [R/W] */
-	entry = proc_create_data(ACPI_PROCESSOR_FILE_LIMIT,
-				 S_IFREG | S_IRUGO | S_IWUSR,
-				 acpi_device_dir(device),
-				 &acpi_processor_limit_fops,
-				 acpi_driver_data(device));
-	if (!entry)
-		return -EIO;
-	return 0;
-}
-static int acpi_processor_remove_fs(struct acpi_device *device)
-{
-
-	if (acpi_device_dir(device)) {
-		remove_proc_entry(ACPI_PROCESSOR_FILE_INFO,
-				  acpi_device_dir(device));
-		remove_proc_entry(ACPI_PROCESSOR_FILE_THROTTLING,
-				  acpi_device_dir(device));
-		remove_proc_entry(ACPI_PROCESSOR_FILE_LIMIT,
-				  acpi_device_dir(device));
-		remove_proc_entry(acpi_device_bid(device), acpi_processor_dir);
-		acpi_device_dir(device) = NULL;
-	}
-
-	return 0;
-}
-#else
-static inline int acpi_processor_add_fs(struct acpi_device *device)
-{
-	return 0;
-}
-static inline int acpi_processor_remove_fs(struct acpi_device *device)
-{
-	return 0;
-}
-#endif
-
-/* Use the acpiid in MADT to map cpus in case of SMP */
-
-#ifndef CONFIG_SMP
-static int get_cpu_id(acpi_handle handle, int type, u32 acpi_id) { return -1; }
-#else
-
-static struct acpi_table_madt *madt;
+static struct dmi_system_id __cpuinitdata processor_idle_dmi_table[] = {
+	{
+	set_no_mwait, "IFL91 board", {
+	DMI_MATCH(DMI_BIOS_VENDOR, "COMPAL"),
+	DMI_MATCH(DMI_SYS_VENDOR, "ZEPTO"),
+	DMI_MATCH(DMI_PRODUCT_VERSION, "3215W"),
+	DMI_MATCH(DMI_BOARD_NAME, "IFL91") }, NULL},
+	{
+	set_no_mwait, "Extensa 5220", {
+	DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+	DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+	DMI_MATCH(DMI_PRODUCT_VERSION, "0100"),
+	DMI_MATCH(DMI_BOARD_NAME, "Columbia") }, NULL},
+	{},
+};
 
+#ifdef CONFIG_SMP
 static int map_lapic_id(struct acpi_subtable_header *entry,
 		 u32 acpi_id, int *apic_id)
 {
 	struct acpi_madt_local_apic *lapic =
 		(struct acpi_madt_local_apic *)entry;
-	if ((lapic->lapic_flags & ACPI_MADT_ENABLED) &&
-	    lapic->processor_id == acpi_id) {
-		*apic_id = lapic->id;
-		return 1;
-	}
-	return 0;
+
+	if (!(lapic->lapic_flags & ACPI_MADT_ENABLED))
+		return 0;
+
+	if (lapic->processor_id != acpi_id)
+		return 0;
+
+	*apic_id = lapic->id;
+	return 1;
 }
 
 static int map_x2apic_id(struct acpi_subtable_header *entry,
@@ -385,22 +64,16 @@ static int map_x2apic_id(struct acpi_subtable_header *entry,
 {
 	struct acpi_madt_local_x2apic *apic =
 		(struct acpi_madt_local_x2apic *)entry;
-	u32 tmp = apic->local_apic_id;
 
-	/* Only check enabled APICs*/
 	if (!(apic->lapic_flags & ACPI_MADT_ENABLED))
 		return 0;
 
-	/* Device statement declaration type */
-	if (device_declaration) {
-		if (apic->uid == acpi_id)
-			goto found;
+	if (device_declaration && (apic->uid == acpi_id)) {
+		*apic_id = apic->local_apic_id;
+		return 1;
 	}
 
 	return 0;
-found:
-	*apic_id = tmp;
-	return 1;
 }
 
 static int map_lsapic_id(struct acpi_subtable_header *entry,
@@ -408,35 +81,34 @@ static int map_lsapic_id(struct acpi_subtable_header *entry,
 {
 	struct acpi_madt_local_sapic *lsapic =
 		(struct acpi_madt_local_sapic *)entry;
-	u32 tmp = (lsapic->id << 8) | lsapic->eid;
 
-	/* Only check enabled APICs*/
 	if (!(lsapic->lapic_flags & ACPI_MADT_ENABLED))
 		return 0;
 
-	/* Device statement declaration type */
 	if (device_declaration) {
-		if (entry->length < 16)
-			printk(KERN_ERR PREFIX
-			    "Invalid LSAPIC with Device type processor (SAPIC ID %#x)\n",
-			    tmp);
-		else if (lsapic->uid == acpi_id)
-			goto found;
-	/* Processor statement declaration type */
-	} else if (lsapic->processor_id == acpi_id)
-		goto found;
+		if ((entry->length < 16) || (lsapic->uid != acpi_id))
+			return 0;
+	} else if (lsapic->processor_id != acpi_id)
+		return 0;
 
-	return 0;
-found:
-	*apic_id = tmp;
+	*apic_id = (lsapic->id << 8) | lsapic->eid;
 	return 1;
 }
 
 static int map_madt_entry(int type, u32 acpi_id)
 {
 	unsigned long madt_end, entry;
+	static struct acpi_table_madt *madt;
+	static int read_madt;
 	int apic_id = -1;
 
+	if (!read_madt) {
+		if (ACPI_FAILURE(acpi_get_table(ACPI_SIG_MADT, 0,
+					(struct acpi_table_header **)&madt)))
+			madt = NULL;
+		read_madt++;
+	}
+
 	if (!madt)
 		return apic_id;
 
@@ -496,7 +168,7 @@ exit:
 	return apic_id;
 }
 
-static int get_cpu_id(acpi_handle handle, int type, u32 acpi_id)
+int acpi_get_cpuid(acpi_handle handle, int type, u32 acpi_id)
 {
 	int i;
 	int apic_id = -1;
@@ -513,630 +185,170 @@ static int get_cpu_id(acpi_handle handle, int type, u32 acpi_id)
 	}
 	return -1;
 }
+EXPORT_SYMBOL_GPL(acpi_get_cpuid);
 #endif
 
-/* --------------------------------------------------------------------------
-                                 Driver Interface
-   -------------------------------------------------------------------------- */
-
-static int acpi_processor_get_info(struct acpi_device *device)
+static bool processor_physically_present(acpi_handle handle)
 {
-	acpi_status status = 0;
+	int cpuid, type;
+	u32 acpi_id;
+	acpi_status status;
+	acpi_object_type acpi_type;
+	unsigned long long tmp;
 	union acpi_object object = { 0 };
 	struct acpi_buffer buffer = { sizeof(union acpi_object), &object };
-	struct acpi_processor *pr;
-	int cpu_index, device_declaration = 0;
-	static int cpu0_initialized;
-
-	pr = acpi_driver_data(device);
-	if (!pr)
-		return -EINVAL;
-
-	if (num_online_cpus() > 1)
-		errata.smp = TRUE;
-
-	acpi_processor_errata(pr);
-
-	/*
-	 * Check to see if we have bus mastering arbitration control.  This
-	 * is required for proper C3 usage (to maintain cache coherency).
-	 */
-	if (acpi_gbl_FADT.pm2_control_block && acpi_gbl_FADT.pm2_control_length) {
-		pr->flags.bm_control = 1;
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "Bus mastering arbitration control present\n"));
-	} else
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "No bus mastering arbitration control\n"));
-
-	if (!strcmp(acpi_device_hid(device), ACPI_PROCESSOR_OBJECT_HID)) {
-		/* Declared with "Processor" statement; match ProcessorID */
-		status = acpi_evaluate_object(pr->handle, NULL, NULL, &buffer);
-		if (ACPI_FAILURE(status)) {
-			printk(KERN_ERR PREFIX "Evaluating processor object\n");
-			return -ENODEV;
-		}
-
-		/*
-		 * TBD: Synch processor ID (via LAPIC/LSAPIC structures) on SMP.
-		 *      >>> 'acpi_get_processor_id(acpi_id, &id)' in
-		 *      arch/xxx/acpi.c
-		 */
-		pr->acpi_id = object.processor.proc_id;
-	} else {
-		/*
-		 * Declared with "Device" statement; match _UID.
-		 * Note that we don't handle string _UIDs yet.
-		 */
-		unsigned long long value;
-		status = acpi_evaluate_integer(pr->handle, METHOD_NAME__UID,
-						NULL, &value);
-		if (ACPI_FAILURE(status)) {
-			printk(KERN_ERR PREFIX
-			    "Evaluating processor _UID [%#x]\n", status);
-			return -ENODEV;
-		}
-		device_declaration = 1;
-		pr->acpi_id = value;
-	}
-	cpu_index = get_cpu_id(pr->handle, device_declaration, pr->acpi_id);
-
-	/* Handle UP system running SMP kernel, with no LAPIC in MADT */
-	if (!cpu0_initialized && (cpu_index == -1) &&
-	    (num_online_cpus() == 1)) {
-		cpu_index = 0;
-	}
-
-	cpu0_initialized = 1;
-
-	pr->id = cpu_index;
-
-	/*
-	 *  Extra Processor objects may be enumerated on MP systems with
-	 *  less than the max # of CPUs. They should be ignored _iff
-	 *  they are physically not present.
-	 */
-	if (pr->id == -1) {
-		if (ACPI_FAILURE
-		    (acpi_processor_hotadd_init(pr->handle, &pr->id))) {
-			return -ENODEV;
-		}
-	}
-	/*
-	 * On some boxes several processors use the same processor bus id.
-	 * But they are located in different scope. For example:
-	 * \_SB.SCK0.CPU0
-	 * \_SB.SCK1.CPU0
-	 * Rename the processor device bus id. And the new bus id will be
-	 * generated as the following format:
-	 * CPU+CPU ID.
-	 */
-	sprintf(acpi_device_bid(device), "CPU%X", pr->id);
-	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Processor [%d:%d]\n", pr->id,
-			  pr->acpi_id));
-
-	if (!object.processor.pblk_address)
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No PBLK (NULL address)\n"));
-	else if (object.processor.pblk_length != 6)
-		printk(KERN_ERR PREFIX "Invalid PBLK length [%d]\n",
-			    object.processor.pblk_length);
-	else {
-		pr->throttling.address = object.processor.pblk_address;
-		pr->throttling.duty_offset = acpi_gbl_FADT.duty_offset;
-		pr->throttling.duty_width = acpi_gbl_FADT.duty_width;
-
-		pr->pblk = object.processor.pblk_address;
-
-		/*
-		 * We don't care about error returns - we just try to mark
-		 * these reserved so that nobody else is confused into thinking
-		 * that this region might be unused..
-		 *
-		 * (In particular, allocating the IO range for Cardbus)
-		 */
-		request_region(pr->throttling.address, 6, "ACPI CPU throttle");
-	}
-
-	/*
-	 * If ACPI describes a slot number for this CPU, we can use it
-	 * ensure we get the right value in the "physical id" field
-	 * of /proc/cpuinfo
-	 */
-	status = acpi_evaluate_object(pr->handle, "_SUN", NULL, &buffer);
-	if (ACPI_SUCCESS(status))
-		arch_fix_phys_package_id(pr->id, object.integer.value);
-
-	return 0;
-}
-
-static DEFINE_PER_CPU(void *, processor_device_array);
-
-static void acpi_processor_notify(struct acpi_device *device, u32 event)
-{
-	struct acpi_processor *pr = acpi_driver_data(device);
-	int saved;
-
-	if (!pr)
-		return;
 
-	switch (event) {
-	case ACPI_PROCESSOR_NOTIFY_PERFORMANCE:
-		saved = pr->performance_platform_limit;
-		acpi_processor_ppc_has_changed(pr, 1);
-		if (saved == pr->performance_platform_limit)
-			break;
-		acpi_bus_generate_proc_event(device, event,
-					pr->performance_platform_limit);
-		acpi_bus_generate_netlink_event(device->pnp.device_class,
-						  dev_name(&device->dev), event,
-						  pr->performance_platform_limit);
+	status = acpi_get_type(handle, &acpi_type);
+	if (ACPI_FAILURE(status))
+		return false;
+
+	switch (acpi_type) {
+	case ACPI_TYPE_PROCESSOR:
+		status = acpi_evaluate_object(handle, NULL, NULL, &buffer);
+		if (ACPI_FAILURE(status))
+			return false;
+		acpi_id = object.processor.proc_id;
 		break;
-	case ACPI_PROCESSOR_NOTIFY_POWER:
-		acpi_processor_cst_has_changed(pr);
-		acpi_bus_generate_proc_event(device, event, 0);
-		acpi_bus_generate_netlink_event(device->pnp.device_class,
-						  dev_name(&device->dev), event, 0);
+	case ACPI_TYPE_DEVICE:
+		status = acpi_evaluate_integer(handle, "_UID", NULL, &tmp);
+		if (ACPI_FAILURE(status))
+			return false;
+		acpi_id = tmp;
 		break;
-	case ACPI_PROCESSOR_NOTIFY_THROTTLING:
-		acpi_processor_tstate_has_changed(pr);
-		acpi_bus_generate_proc_event(device, event, 0);
-		acpi_bus_generate_netlink_event(device->pnp.device_class,
-						  dev_name(&device->dev), event, 0);
 	default:
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "Unsupported event [0x%x]\n", event));
-		break;
+		return false;
 	}
 
-	return;
-}
+	type = (acpi_type == ACPI_TYPE_DEVICE) ? 1 : 0;
+	cpuid = acpi_get_cpuid(handle, type, acpi_id);
 
-static int acpi_cpu_soft_notify(struct notifier_block *nfb,
-		unsigned long action, void *hcpu)
-{
-	unsigned int cpu = (unsigned long)hcpu;
-	struct acpi_processor *pr = per_cpu(processors, cpu);
+	if (cpuid == -1)
+		return false;
 
-	if (action == CPU_ONLINE && pr) {
-		acpi_processor_ppc_has_changed(pr, 0);
-		acpi_processor_cst_has_changed(pr);
-		acpi_processor_tstate_has_changed(pr);
-	}
-	return NOTIFY_OK;
+	return true;
 }
 
-static struct notifier_block acpi_cpu_notifier =
+static void acpi_set_pdc_bits(u32 *buf)
 {
-	    .notifier_call = acpi_cpu_soft_notify,
-};
-
-static int __cpuinit acpi_processor_add(struct acpi_device *device)
-{
-	struct acpi_processor *pr = NULL;
-	int result = 0;
-	struct sys_device *sysdev;
-
-	pr = kzalloc(sizeof(struct acpi_processor), GFP_KERNEL);
-	if (!pr)
-		return -ENOMEM;
-
-	if (!zalloc_cpumask_var(&pr->throttling.shared_cpu_map, GFP_KERNEL)) {
-		kfree(pr);
-		return -ENOMEM;
-	}
-
-	pr->handle = device->handle;
-	strcpy(acpi_device_name(device), ACPI_PROCESSOR_DEVICE_NAME);
-	strcpy(acpi_device_class(device), ACPI_PROCESSOR_CLASS);
-	device->driver_data = pr;
-
-	result = acpi_processor_get_info(device);
-	if (result) {
-		/* Processor is physically not present */
-		return 0;
-	}
-
-	BUG_ON((pr->id >= nr_cpu_ids) || (pr->id < 0));
-
-	/*
-	 * Buggy BIOS check
-	 * ACPI id of processors can be reported wrongly by the BIOS.
-	 * Don't trust it blindly
-	 */
-	if (per_cpu(processor_device_array, pr->id) != NULL &&
-	    per_cpu(processor_device_array, pr->id) != device) {
-		printk(KERN_WARNING "BIOS reported wrong ACPI id "
-			"for the processor\n");
-		result = -ENODEV;
-		goto err_free_cpumask;
-	}
-	per_cpu(processor_device_array, pr->id) = device;
+	buf[0] = ACPI_PDC_REVISION_ID;
+	buf[1] = 1;
 
-	per_cpu(processors, pr->id) = pr;
+	/* Enable coordination with firmware's _TSD info */
+	buf[2] = ACPI_PDC_SMP_T_SWCOORD;
 
-	result = acpi_processor_add_fs(device);
-	if (result)
-		goto err_free_cpumask;
-
-	sysdev = get_cpu_sysdev(pr->id);
-	if (sysfs_create_link(&device->dev.kobj, &sysdev->kobj, "sysdev")) {
-		result = -EFAULT;
-		goto err_remove_fs;
-	}
-
-	/* _PDC call should be done before doing anything else (if reqd.). */
-	acpi_processor_set_pdc(pr->handle);
-
-#ifdef CONFIG_CPU_FREQ
-	acpi_processor_ppc_has_changed(pr, 0);
-#endif
-	acpi_processor_get_throttling_info(pr);
-	acpi_processor_get_limit_info(pr);
-
-
-	acpi_processor_power_init(pr, device);
-
-	pr->cdev = thermal_cooling_device_register("Processor", device,
-						&processor_cooling_ops);
-	if (IS_ERR(pr->cdev)) {
-		result = PTR_ERR(pr->cdev);
-		goto err_power_exit;
-	}
-
-	dev_dbg(&device->dev, "registered as cooling_device%d\n",
-		 pr->cdev->id);
-
-	result = sysfs_create_link(&device->dev.kobj,
-				   &pr->cdev->device.kobj,
-				   "thermal_cooling");
-	if (result) {
-		printk(KERN_ERR PREFIX "Create sysfs link\n");
-		goto err_thermal_unregister;
-	}
-	result = sysfs_create_link(&pr->cdev->device.kobj,
-				   &device->dev.kobj,
-				   "device");
-	if (result) {
-		printk(KERN_ERR PREFIX "Create sysfs link\n");
-		goto err_remove_sysfs;
-	}
-
-	return 0;
-
-err_remove_sysfs:
-	sysfs_remove_link(&device->dev.kobj, "thermal_cooling");
-err_thermal_unregister:
-	thermal_cooling_device_unregister(pr->cdev);
-err_power_exit:
-	acpi_processor_power_exit(pr, device);
-err_remove_fs:
-	acpi_processor_remove_fs(device);
-err_free_cpumask:
-	free_cpumask_var(pr->throttling.shared_cpu_map);
-
-	return result;
+	/* Twiddle arch-specific bits needed for _PDC */
+	arch_acpi_set_pdc_bits(buf);
 }
 
-static int acpi_processor_remove(struct acpi_device *device, int type)
+static struct acpi_object_list *acpi_processor_alloc_pdc(void)
 {
-	struct acpi_processor *pr = NULL;
-
-
-	if (!device || !acpi_driver_data(device))
-		return -EINVAL;
-
-	pr = acpi_driver_data(device);
-
-	if (pr->id >= nr_cpu_ids)
-		goto free;
+	struct acpi_object_list *obj_list;
+	union acpi_object *obj;
+	u32 *buf;
 
-	if (type == ACPI_BUS_REMOVAL_EJECT) {
-		if (acpi_processor_handle_eject(pr))
-			return -EINVAL;
+	/* allocate and initialize pdc. It will be used later. */
+	obj_list = kmalloc(sizeof(struct acpi_object_list), GFP_KERNEL);
+	if (!obj_list) {
+		printk(KERN_ERR "Memory allocation error\n");
+		return NULL;
 	}
 
-	acpi_processor_power_exit(pr, device);
-
-	sysfs_remove_link(&device->dev.kobj, "sysdev");
-
-	acpi_processor_remove_fs(device);
-
-	if (pr->cdev) {
-		sysfs_remove_link(&device->dev.kobj, "thermal_cooling");
-		sysfs_remove_link(&pr->cdev->device.kobj, "device");
-		thermal_cooling_device_unregister(pr->cdev);
-		pr->cdev = NULL;
+	obj = kmalloc(sizeof(union acpi_object), GFP_KERNEL);
+	if (!obj) {
+		printk(KERN_ERR "Memory allocation error\n");
+		kfree(obj_list);
+		return NULL;
 	}
 
-	per_cpu(processors, pr->id) = NULL;
-	per_cpu(processor_device_array, pr->id) = NULL;
-
-free:
-	free_cpumask_var(pr->throttling.shared_cpu_map);
-	kfree(pr);
-
-	return 0;
-}
-
-#ifdef CONFIG_ACPI_HOTPLUG_CPU
-/****************************************************************************
- * 	Acpi processor hotplug support 				       	    *
- ****************************************************************************/
-
-static int is_processor_present(acpi_handle handle)
-{
-	acpi_status status;
-	unsigned long long sta = 0;
-
-
-	status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
-
-	if (ACPI_SUCCESS(status) && (sta & ACPI_STA_DEVICE_PRESENT))
-		return 1;
-
-	/*
-	 * _STA is mandatory for a processor that supports hot plug
-	 */
-	if (status == AE_NOT_FOUND)
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				"Processor does not support hot plug\n"));
-	else
-		ACPI_EXCEPTION((AE_INFO, status,
-				"Processor Device is not present"));
-	return 0;
-}
-
-static
-int acpi_processor_device_add(acpi_handle handle, struct acpi_device **device)
-{
-	acpi_handle phandle;
-	struct acpi_device *pdev;
-
-
-	if (acpi_get_parent(handle, &phandle)) {
-		return -ENODEV;
+	buf = kmalloc(12, GFP_KERNEL);
+	if (!buf) {
+		printk(KERN_ERR "Memory allocation error\n");
+		kfree(obj);
+		kfree(obj_list);
+		return NULL;
 	}
 
-	if (acpi_bus_get_device(phandle, &pdev)) {
-		return -ENODEV;
-	}
+	acpi_set_pdc_bits(buf);
 
-	if (acpi_bus_add(device, pdev, handle, ACPI_BUS_TYPE_PROCESSOR)) {
-		return -ENODEV;
-	}
+	obj->type = ACPI_TYPE_BUFFER;
+	obj->buffer.length = 12;
+	obj->buffer.pointer = (u8 *) buf;
+	obj_list->count = 1;
+	obj_list->pointer = obj;
 
-	return 0;
+	return obj_list;
 }
 
-static void __ref acpi_processor_hotplug_notify(acpi_handle handle,
-						u32 event, void *data)
+/*
+ * _PDC is required for a BIOS-OS handshake for most of the newer
+ * ACPI processor features.
+ */
+static int
+acpi_processor_eval_pdc(acpi_handle handle, struct acpi_object_list *pdc_in)
 {
-	struct acpi_processor *pr;
-	struct acpi_device *device = NULL;
-	int result;
-
+	acpi_status status = AE_OK;
 
-	switch (event) {
-	case ACPI_NOTIFY_BUS_CHECK:
-	case ACPI_NOTIFY_DEVICE_CHECK:
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-		"Processor driver received %s event\n",
-		       (event == ACPI_NOTIFY_BUS_CHECK) ?
-		       "ACPI_NOTIFY_BUS_CHECK" : "ACPI_NOTIFY_DEVICE_CHECK"));
-
-		if (!is_processor_present(handle))
-			break;
+	if (idle_nomwait) {
+		/*
+		 * If mwait is disabled for CPU C-states, the C2C3_FFH access
+		 * mode will be disabled in the parameter of _PDC object.
+		 * Of course C1_FFH access mode will also be disabled.
+		 */
+		union acpi_object *obj;
+		u32 *buffer = NULL;
 
-		if (acpi_bus_get_device(handle, &device)) {
-			result = acpi_processor_device_add(handle, &device);
-			if (result)
-				printk(KERN_ERR PREFIX
-					    "Unable to add the device\n");
-			break;
-		}
-		break;
-	case ACPI_NOTIFY_EJECT_REQUEST:
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "received ACPI_NOTIFY_EJECT_REQUEST\n"));
+		obj = pdc_in->pointer;
+		buffer = (u32 *)(obj->buffer.pointer);
+		buffer[2] &= ~(ACPI_PDC_C_C2C3_FFH | ACPI_PDC_C_C1_FFH);
 
-		if (acpi_bus_get_device(handle, &device)) {
-			printk(KERN_ERR PREFIX
-				    "Device don't exist, dropping EJECT\n");
-			break;
-		}
-		pr = acpi_driver_data(device);
-		if (!pr) {
-			printk(KERN_ERR PREFIX
-				    "Driver data is NULL, dropping EJECT\n");
-			return;
-		}
-		break;
-	default:
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "Unsupported event [0x%x]\n", event));
-		break;
 	}
+	status = acpi_evaluate_object(handle, "_PDC", pdc_in, NULL);
 
-	return;
-}
-
-static acpi_status
-processor_walk_namespace_cb(acpi_handle handle,
-			    u32 lvl, void *context, void **rv)
-{
-	acpi_status status;
-	int *action = context;
-	acpi_object_type type = 0;
-
-	status = acpi_get_type(handle, &type);
 	if (ACPI_FAILURE(status))
-		return (AE_OK);
-
-	if (type != ACPI_TYPE_PROCESSOR)
-		return (AE_OK);
-
-	switch (*action) {
-	case INSTALL_NOTIFY_HANDLER:
-		acpi_install_notify_handler(handle,
-					    ACPI_SYSTEM_NOTIFY,
-					    acpi_processor_hotplug_notify,
-					    NULL);
-		break;
-	case UNINSTALL_NOTIFY_HANDLER:
-		acpi_remove_notify_handler(handle,
-					   ACPI_SYSTEM_NOTIFY,
-					   acpi_processor_hotplug_notify);
-		break;
-	default:
-		break;
-	}
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+		    "Could not evaluate _PDC, using legacy perf. control.\n"));
 
-	return (AE_OK);
+	return status;
 }
 
-static acpi_status acpi_processor_hotadd_init(acpi_handle handle, int *p_cpu)
+void acpi_processor_set_pdc(acpi_handle handle)
 {
+	struct acpi_object_list *obj_list;
 
-	if (!is_processor_present(handle)) {
-		return AE_ERROR;
-	}
+	if (arch_has_acpi_pdc() == false)
+		return;
 
-	if (acpi_map_lsapic(handle, p_cpu))
-		return AE_ERROR;
+	obj_list = acpi_processor_alloc_pdc();
+	if (!obj_list)
+		return;
 
-	if (arch_register_cpu(*p_cpu)) {
-		acpi_unmap_lsapic(*p_cpu);
-		return AE_ERROR;
-	}
+	acpi_processor_eval_pdc(handle, obj_list);
 
-	return AE_OK;
+	kfree(obj_list->pointer->buffer.pointer);
+	kfree(obj_list->pointer);
+	kfree(obj_list);
 }
+EXPORT_SYMBOL_GPL(acpi_processor_set_pdc);
 
-static int acpi_processor_handle_eject(struct acpi_processor *pr)
+static acpi_status
+early_init_pdc(acpi_handle handle, u32 lvl, void *context, void **rv)
 {
-	if (cpu_online(pr->id))
-		cpu_down(pr->id);
+	if (processor_physically_present(handle) == false)
+		return AE_OK;
 
-	arch_unregister_cpu(pr->id);
-	acpi_unmap_lsapic(pr->id);
-	return (0);
-}
-#else
-static acpi_status acpi_processor_hotadd_init(acpi_handle handle, int *p_cpu)
-{
-	return AE_ERROR;
-}
-static int acpi_processor_handle_eject(struct acpi_processor *pr)
-{
-	return (-EINVAL);
+	acpi_processor_set_pdc(handle);
+	return AE_OK;
 }
-#endif
 
-static
-void acpi_processor_install_hotplug_notify(void)
+void __init acpi_early_processor_set_pdc(void)
 {
-#ifdef CONFIG_ACPI_HOTPLUG_CPU
-	int action = INSTALL_NOTIFY_HANDLER;
-	acpi_walk_namespace(ACPI_TYPE_PROCESSOR,
-			    ACPI_ROOT_OBJECT,
-			    ACPI_UINT32_MAX,
-			    processor_walk_namespace_cb, NULL, &action, NULL);
-#endif
-	register_hotcpu_notifier(&acpi_cpu_notifier);
-}
+	/*
+	 * Check whether the system is DMI table. If yes, OSPM
+	 * should not use mwait for CPU-states.
+	 */
+	dmi_check_system(processor_idle_dmi_table);
 
-static
-void acpi_processor_uninstall_hotplug_notify(void)
-{
-#ifdef CONFIG_ACPI_HOTPLUG_CPU
-	int action = UNINSTALL_NOTIFY_HANDLER;
-	acpi_walk_namespace(ACPI_TYPE_PROCESSOR,
-			    ACPI_ROOT_OBJECT,
+	acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT,
 			    ACPI_UINT32_MAX,
-			    processor_walk_namespace_cb, NULL, &action, NULL);
-#endif
-	unregister_hotcpu_notifier(&acpi_cpu_notifier);
+			    early_init_pdc, NULL, NULL, NULL);
 }
-
-/*
- * We keep the driver loaded even when ACPI is not running.
- * This is needed for the powernow-k8 driver, that works even without
- * ACPI, but needs symbols from this driver
- */
-
-static int __init acpi_processor_init(void)
-{
-	int result = 0;
-
-	if (acpi_disabled)
-		return 0;
-
-	memset(&errata, 0, sizeof(errata));
-
-#ifdef CONFIG_SMP
-	if (ACPI_FAILURE(acpi_get_table(ACPI_SIG_MADT, 0,
-				(struct acpi_table_header **)&madt)))
-		madt = NULL;
-#endif
-#ifdef CONFIG_ACPI_PROCFS
-	acpi_processor_dir = proc_mkdir(ACPI_PROCESSOR_CLASS, acpi_root_dir);
-	if (!acpi_processor_dir)
-		return -ENOMEM;
-#endif
-	result = cpuidle_register_driver(&acpi_idle_driver);
-	if (result < 0)
-		goto out_proc;
-
-	result = acpi_bus_register_driver(&acpi_processor_driver);
-	if (result < 0)
-		goto out_cpuidle;
-
-	acpi_processor_install_hotplug_notify();
-
-	acpi_thermal_cpufreq_init();
-
-	acpi_processor_ppc_init();
-
-	acpi_processor_throttling_init();
-
-	return 0;
-
-out_cpuidle:
-	cpuidle_unregister_driver(&acpi_idle_driver);
-
-out_proc:
-#ifdef CONFIG_ACPI_PROCFS
-	remove_proc_entry(ACPI_PROCESSOR_CLASS, acpi_root_dir);
-#endif
-
-	return result;
-}
-
-static void __exit acpi_processor_exit(void)
-{
-	if (acpi_disabled)
-		return;
-
-	acpi_processor_ppc_exit();
-
-	acpi_thermal_cpufreq_exit();
-
-	acpi_processor_uninstall_hotplug_notify();
-
-	acpi_bus_unregister_driver(&acpi_processor_driver);
-
-	cpuidle_unregister_driver(&acpi_idle_driver);
-
-#ifdef CONFIG_ACPI_PROCFS
-	remove_proc_entry(ACPI_PROCESSOR_CLASS, acpi_root_dir);
-#endif
-
-	return;
-}
-
-module_init(acpi_processor_init);
-module_exit(acpi_processor_exit);
-
-EXPORT_SYMBOL(acpi_processor_set_thermal_limit);
-
-MODULE_ALIAS("processor");
diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c
new file mode 100644
index 000000000000..b5658cdce27f
--- /dev/null
+++ b/drivers/acpi/processor_driver.c
@@ -0,0 +1,978 @@
+/*
+ * acpi_processor.c - ACPI Processor Driver ($Revision: 71 $)
+ *
+ *  Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
+ *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
+ *  Copyright (C) 2004       Dominik Brodowski <linux@brodo.de>
+ *  Copyright (C) 2004  Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
+ *  			- Added processor hotplug support
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or (at
+ *  your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful, but
+ *  WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *  TBD:
+ *	1. Make # power states dynamic.
+ *	2. Support duty_cycle values that span bit 4.
+ *	3. Optimize by having scheduler determine business instead of
+ *	   having us try to calculate it here.
+ *	4. Need C1 timing -- must modify kernel (IRQ handler) to get this.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/pm.h>
+#include <linux/cpufreq.h>
+#include <linux/cpu.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/dmi.h>
+#include <linux/moduleparam.h>
+#include <linux/cpuidle.h>
+
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/cpu.h>
+#include <asm/delay.h>
+#include <asm/uaccess.h>
+#include <asm/processor.h>
+#include <asm/smp.h>
+#include <asm/acpi.h>
+
+#include <acpi/acpi_bus.h>
+#include <acpi/acpi_drivers.h>
+#include <acpi/processor.h>
+
+#define PREFIX "ACPI: "
+
+#define ACPI_PROCESSOR_CLASS		"processor"
+#define ACPI_PROCESSOR_DEVICE_NAME	"Processor"
+#define ACPI_PROCESSOR_FILE_INFO	"info"
+#define ACPI_PROCESSOR_FILE_THROTTLING	"throttling"
+#define ACPI_PROCESSOR_FILE_LIMIT	"limit"
+#define ACPI_PROCESSOR_NOTIFY_PERFORMANCE 0x80
+#define ACPI_PROCESSOR_NOTIFY_POWER	0x81
+#define ACPI_PROCESSOR_NOTIFY_THROTTLING	0x82
+
+#define ACPI_PROCESSOR_LIMIT_USER	0
+#define ACPI_PROCESSOR_LIMIT_THERMAL	1
+
+#define _COMPONENT		ACPI_PROCESSOR_COMPONENT
+ACPI_MODULE_NAME("processor_driver");
+
+MODULE_AUTHOR("Paul Diefenbaugh");
+MODULE_DESCRIPTION("ACPI Processor Driver");
+MODULE_LICENSE("GPL");
+
+static int acpi_processor_add(struct acpi_device *device);
+static int acpi_processor_remove(struct acpi_device *device, int type);
+#ifdef CONFIG_ACPI_PROCFS
+static int acpi_processor_info_open_fs(struct inode *inode, struct file *file);
+#endif
+static void acpi_processor_notify(struct acpi_device *device, u32 event);
+static acpi_status acpi_processor_hotadd_init(acpi_handle handle, int *p_cpu);
+static int acpi_processor_handle_eject(struct acpi_processor *pr);
+
+
+static const struct acpi_device_id processor_device_ids[] = {
+	{ACPI_PROCESSOR_OBJECT_HID, 0},
+	{"ACPI0007", 0},
+	{"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, processor_device_ids);
+
+static struct acpi_driver acpi_processor_driver = {
+	.name = "processor",
+	.class = ACPI_PROCESSOR_CLASS,
+	.ids = processor_device_ids,
+	.ops = {
+		.add = acpi_processor_add,
+		.remove = acpi_processor_remove,
+		.suspend = acpi_processor_suspend,
+		.resume = acpi_processor_resume,
+		.notify = acpi_processor_notify,
+		},
+};
+
+#define INSTALL_NOTIFY_HANDLER		1
+#define UNINSTALL_NOTIFY_HANDLER	2
+#ifdef CONFIG_ACPI_PROCFS
+static const struct file_operations acpi_processor_info_fops = {
+	.owner = THIS_MODULE,
+	.open = acpi_processor_info_open_fs,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+#endif
+
+DEFINE_PER_CPU(struct acpi_processor *, processors);
+EXPORT_PER_CPU_SYMBOL(processors);
+
+struct acpi_processor_errata errata __read_mostly;
+
+/* --------------------------------------------------------------------------
+                                Errata Handling
+   -------------------------------------------------------------------------- */
+
+static int acpi_processor_errata_piix4(struct pci_dev *dev)
+{
+	u8 value1 = 0;
+	u8 value2 = 0;
+
+
+	if (!dev)
+		return -EINVAL;
+
+	/*
+	 * Note that 'dev' references the PIIX4 ACPI Controller.
+	 */
+
+	switch (dev->revision) {
+	case 0:
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4 A-step\n"));
+		break;
+	case 1:
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4 B-step\n"));
+		break;
+	case 2:
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4E\n"));
+		break;
+	case 3:
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4M\n"));
+		break;
+	default:
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found unknown PIIX4\n"));
+		break;
+	}
+
+	switch (dev->revision) {
+
+	case 0:		/* PIIX4 A-step */
+	case 1:		/* PIIX4 B-step */
+		/*
+		 * See specification changes #13 ("Manual Throttle Duty Cycle")
+		 * and #14 ("Enabling and Disabling Manual Throttle"), plus
+		 * erratum #5 ("STPCLK# Deassertion Time") from the January
+		 * 2002 PIIX4 specification update.  Applies to only older
+		 * PIIX4 models.
+		 */
+		errata.piix4.throttle = 1;
+
+	case 2:		/* PIIX4E */
+	case 3:		/* PIIX4M */
+		/*
+		 * See erratum #18 ("C3 Power State/BMIDE and Type-F DMA
+		 * Livelock") from the January 2002 PIIX4 specification update.
+		 * Applies to all PIIX4 models.
+		 */
+
+		/*
+		 * BM-IDE
+		 * ------
+		 * Find the PIIX4 IDE Controller and get the Bus Master IDE
+		 * Status register address.  We'll use this later to read
+		 * each IDE controller's DMA status to make sure we catch all
+		 * DMA activity.
+		 */
+		dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
+				     PCI_DEVICE_ID_INTEL_82371AB,
+				     PCI_ANY_ID, PCI_ANY_ID, NULL);
+		if (dev) {
+			errata.piix4.bmisx = pci_resource_start(dev, 4);
+			pci_dev_put(dev);
+		}
+
+		/*
+		 * Type-F DMA
+		 * ----------
+		 * Find the PIIX4 ISA Controller and read the Motherboard
+		 * DMA controller's status to see if Type-F (Fast) DMA mode
+		 * is enabled (bit 7) on either channel.  Note that we'll
+		 * disable C3 support if this is enabled, as some legacy
+		 * devices won't operate well if fast DMA is disabled.
+		 */
+		dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
+				     PCI_DEVICE_ID_INTEL_82371AB_0,
+				     PCI_ANY_ID, PCI_ANY_ID, NULL);
+		if (dev) {
+			pci_read_config_byte(dev, 0x76, &value1);
+			pci_read_config_byte(dev, 0x77, &value2);
+			if ((value1 & 0x80) || (value2 & 0x80))
+				errata.piix4.fdma = 1;
+			pci_dev_put(dev);
+		}
+
+		break;
+	}
+
+	if (errata.piix4.bmisx)
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+				  "Bus master activity detection (BM-IDE) erratum enabled\n"));
+	if (errata.piix4.fdma)
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+				  "Type-F DMA livelock erratum (C3 disabled)\n"));
+
+	return 0;
+}
+
+static int acpi_processor_errata(struct acpi_processor *pr)
+{
+	int result = 0;
+	struct pci_dev *dev = NULL;
+
+
+	if (!pr)
+		return -EINVAL;
+
+	/*
+	 * PIIX4
+	 */
+	dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
+			     PCI_DEVICE_ID_INTEL_82371AB_3, PCI_ANY_ID,
+			     PCI_ANY_ID, NULL);
+	if (dev) {
+		result = acpi_processor_errata_piix4(dev);
+		pci_dev_put(dev);
+	}
+
+	return result;
+}
+
+/* --------------------------------------------------------------------------
+                              FS Interface (/proc)
+   -------------------------------------------------------------------------- */
+
+#ifdef CONFIG_ACPI_PROCFS
+static struct proc_dir_entry *acpi_processor_dir = NULL;
+
+static int acpi_processor_info_seq_show(struct seq_file *seq, void *offset)
+{
+	struct acpi_processor *pr = seq->private;
+
+
+	if (!pr)
+		goto end;
+
+	seq_printf(seq, "processor id:            %d\n"
+		   "acpi id:                 %d\n"
+		   "bus mastering control:   %s\n"
+		   "power management:        %s\n"
+		   "throttling control:      %s\n"
+		   "limit interface:         %s\n",
+		   pr->id,
+		   pr->acpi_id,
+		   pr->flags.bm_control ? "yes" : "no",
+		   pr->flags.power ? "yes" : "no",
+		   pr->flags.throttling ? "yes" : "no",
+		   pr->flags.limit ? "yes" : "no");
+
+      end:
+	return 0;
+}
+
+static int acpi_processor_info_open_fs(struct inode *inode, struct file *file)
+{
+	return single_open(file, acpi_processor_info_seq_show,
+			   PDE(inode)->data);
+}
+
+static int __cpuinit acpi_processor_add_fs(struct acpi_device *device)
+{
+	struct proc_dir_entry *entry = NULL;
+
+
+	if (!acpi_device_dir(device)) {
+		acpi_device_dir(device) = proc_mkdir(acpi_device_bid(device),
+						     acpi_processor_dir);
+		if (!acpi_device_dir(device))
+			return -ENODEV;
+	}
+
+	/* 'info' [R] */
+	entry = proc_create_data(ACPI_PROCESSOR_FILE_INFO,
+				 S_IRUGO, acpi_device_dir(device),
+				 &acpi_processor_info_fops,
+				 acpi_driver_data(device));
+	if (!entry)
+		return -EIO;
+
+	/* 'throttling' [R/W] */
+	entry = proc_create_data(ACPI_PROCESSOR_FILE_THROTTLING,
+				 S_IFREG | S_IRUGO | S_IWUSR,
+				 acpi_device_dir(device),
+				 &acpi_processor_throttling_fops,
+				 acpi_driver_data(device));
+	if (!entry)
+		return -EIO;
+
+	/* 'limit' [R/W] */
+	entry = proc_create_data(ACPI_PROCESSOR_FILE_LIMIT,
+				 S_IFREG | S_IRUGO | S_IWUSR,
+				 acpi_device_dir(device),
+				 &acpi_processor_limit_fops,
+				 acpi_driver_data(device));
+	if (!entry)
+		return -EIO;
+	return 0;
+}
+static int acpi_processor_remove_fs(struct acpi_device *device)
+{
+
+	if (acpi_device_dir(device)) {
+		remove_proc_entry(ACPI_PROCESSOR_FILE_INFO,
+				  acpi_device_dir(device));
+		remove_proc_entry(ACPI_PROCESSOR_FILE_THROTTLING,
+				  acpi_device_dir(device));
+		remove_proc_entry(ACPI_PROCESSOR_FILE_LIMIT,
+				  acpi_device_dir(device));
+		remove_proc_entry(acpi_device_bid(device), acpi_processor_dir);
+		acpi_device_dir(device) = NULL;
+	}
+
+	return 0;
+}
+#else
+static inline int acpi_processor_add_fs(struct acpi_device *device)
+{
+	return 0;
+}
+static inline int acpi_processor_remove_fs(struct acpi_device *device)
+{
+	return 0;
+}
+#endif
+
+/* --------------------------------------------------------------------------
+                                 Driver Interface
+   -------------------------------------------------------------------------- */
+
+static int acpi_processor_get_info(struct acpi_device *device)
+{
+	acpi_status status = 0;
+	union acpi_object object = { 0 };
+	struct acpi_buffer buffer = { sizeof(union acpi_object), &object };
+	struct acpi_processor *pr;
+	int cpu_index, device_declaration = 0;
+	static int cpu0_initialized;
+
+	pr = acpi_driver_data(device);
+	if (!pr)
+		return -EINVAL;
+
+	if (num_online_cpus() > 1)
+		errata.smp = TRUE;
+
+	acpi_processor_errata(pr);
+
+	/*
+	 * Check to see if we have bus mastering arbitration control.  This
+	 * is required for proper C3 usage (to maintain cache coherency).
+	 */
+	if (acpi_gbl_FADT.pm2_control_block && acpi_gbl_FADT.pm2_control_length) {
+		pr->flags.bm_control = 1;
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+				  "Bus mastering arbitration control present\n"));
+	} else
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+				  "No bus mastering arbitration control\n"));
+
+	if (!strcmp(acpi_device_hid(device), ACPI_PROCESSOR_OBJECT_HID)) {
+		/* Declared with "Processor" statement; match ProcessorID */
+		status = acpi_evaluate_object(pr->handle, NULL, NULL, &buffer);
+		if (ACPI_FAILURE(status)) {
+			printk(KERN_ERR PREFIX "Evaluating processor object\n");
+			return -ENODEV;
+		}
+
+		/*
+		 * TBD: Synch processor ID (via LAPIC/LSAPIC structures) on SMP.
+		 *      >>> 'acpi_get_processor_id(acpi_id, &id)' in
+		 *      arch/xxx/acpi.c
+		 */
+		pr->acpi_id = object.processor.proc_id;
+	} else {
+		/*
+		 * Declared with "Device" statement; match _UID.
+		 * Note that we don't handle string _UIDs yet.
+		 */
+		unsigned long long value;
+		status = acpi_evaluate_integer(pr->handle, METHOD_NAME__UID,
+						NULL, &value);
+		if (ACPI_FAILURE(status)) {
+			printk(KERN_ERR PREFIX
+			    "Evaluating processor _UID [%#x]\n", status);
+			return -ENODEV;
+		}
+		device_declaration = 1;
+		pr->acpi_id = value;
+	}
+	cpu_index = acpi_get_cpuid(pr->handle, device_declaration, pr->acpi_id);
+
+	/* Handle UP system running SMP kernel, with no LAPIC in MADT */
+	if (!cpu0_initialized && (cpu_index == -1) &&
+	    (num_online_cpus() == 1)) {
+		cpu_index = 0;
+	}
+
+	cpu0_initialized = 1;
+
+	pr->id = cpu_index;
+
+	/*
+	 *  Extra Processor objects may be enumerated on MP systems with
+	 *  less than the max # of CPUs. They should be ignored _iff
+	 *  they are physically not present.
+	 */
+	if (pr->id == -1) {
+		if (ACPI_FAILURE
+		    (acpi_processor_hotadd_init(pr->handle, &pr->id))) {
+			return -ENODEV;
+		}
+	}
+	/*
+	 * On some boxes several processors use the same processor bus id.
+	 * But they are located in different scope. For example:
+	 * \_SB.SCK0.CPU0
+	 * \_SB.SCK1.CPU0
+	 * Rename the processor device bus id. And the new bus id will be
+	 * generated as the following format:
+	 * CPU+CPU ID.
+	 */
+	sprintf(acpi_device_bid(device), "CPU%X", pr->id);
+	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Processor [%d:%d]\n", pr->id,
+			  pr->acpi_id));
+
+	if (!object.processor.pblk_address)
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No PBLK (NULL address)\n"));
+	else if (object.processor.pblk_length != 6)
+		printk(KERN_ERR PREFIX "Invalid PBLK length [%d]\n",
+			    object.processor.pblk_length);
+	else {
+		pr->throttling.address = object.processor.pblk_address;
+		pr->throttling.duty_offset = acpi_gbl_FADT.duty_offset;
+		pr->throttling.duty_width = acpi_gbl_FADT.duty_width;
+
+		pr->pblk = object.processor.pblk_address;
+
+		/*
+		 * We don't care about error returns - we just try to mark
+		 * these reserved so that nobody else is confused into thinking
+		 * that this region might be unused..
+		 *
+		 * (In particular, allocating the IO range for Cardbus)
+		 */
+		request_region(pr->throttling.address, 6, "ACPI CPU throttle");
+	}
+
+	/*
+	 * If ACPI describes a slot number for this CPU, we can use it
+	 * ensure we get the right value in the "physical id" field
+	 * of /proc/cpuinfo
+	 */
+	status = acpi_evaluate_object(pr->handle, "_SUN", NULL, &buffer);
+	if (ACPI_SUCCESS(status))
+		arch_fix_phys_package_id(pr->id, object.integer.value);
+
+	return 0;
+}
+
+static DEFINE_PER_CPU(void *, processor_device_array);
+
+static void acpi_processor_notify(struct acpi_device *device, u32 event)
+{
+	struct acpi_processor *pr = acpi_driver_data(device);
+	int saved;
+
+	if (!pr)
+		return;
+
+	switch (event) {
+	case ACPI_PROCESSOR_NOTIFY_PERFORMANCE:
+		saved = pr->performance_platform_limit;
+		acpi_processor_ppc_has_changed(pr, 1);
+		if (saved == pr->performance_platform_limit)
+			break;
+		acpi_bus_generate_proc_event(device, event,
+					pr->performance_platform_limit);
+		acpi_bus_generate_netlink_event(device->pnp.device_class,
+						  dev_name(&device->dev), event,
+						  pr->performance_platform_limit);
+		break;
+	case ACPI_PROCESSOR_NOTIFY_POWER:
+		acpi_processor_cst_has_changed(pr);
+		acpi_bus_generate_proc_event(device, event, 0);
+		acpi_bus_generate_netlink_event(device->pnp.device_class,
+						  dev_name(&device->dev), event, 0);
+		break;
+	case ACPI_PROCESSOR_NOTIFY_THROTTLING:
+		acpi_processor_tstate_has_changed(pr);
+		acpi_bus_generate_proc_event(device, event, 0);
+		acpi_bus_generate_netlink_event(device->pnp.device_class,
+						  dev_name(&device->dev), event, 0);
+	default:
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+				  "Unsupported event [0x%x]\n", event));
+		break;
+	}
+
+	return;
+}
+
+static int acpi_cpu_soft_notify(struct notifier_block *nfb,
+		unsigned long action, void *hcpu)
+{
+	unsigned int cpu = (unsigned long)hcpu;
+	struct acpi_processor *pr = per_cpu(processors, cpu);
+
+	if (action == CPU_ONLINE && pr) {
+		acpi_processor_ppc_has_changed(pr, 0);
+		acpi_processor_cst_has_changed(pr);
+		acpi_processor_tstate_has_changed(pr);
+	}
+	return NOTIFY_OK;
+}
+
+static struct notifier_block acpi_cpu_notifier =
+{
+	    .notifier_call = acpi_cpu_soft_notify,
+};
+
+static int __cpuinit acpi_processor_add(struct acpi_device *device)
+{
+	struct acpi_processor *pr = NULL;
+	int result = 0;
+	struct sys_device *sysdev;
+
+	pr = kzalloc(sizeof(struct acpi_processor), GFP_KERNEL);
+	if (!pr)
+		return -ENOMEM;
+
+	if (!zalloc_cpumask_var(&pr->throttling.shared_cpu_map, GFP_KERNEL)) {
+		kfree(pr);
+		return -ENOMEM;
+	}
+
+	pr->handle = device->handle;
+	strcpy(acpi_device_name(device), ACPI_PROCESSOR_DEVICE_NAME);
+	strcpy(acpi_device_class(device), ACPI_PROCESSOR_CLASS);
+	device->driver_data = pr;
+
+	result = acpi_processor_get_info(device);
+	if (result) {
+		/* Processor is physically not present */
+		return 0;
+	}
+
+	BUG_ON((pr->id >= nr_cpu_ids) || (pr->id < 0));
+
+	/*
+	 * Buggy BIOS check
+	 * ACPI id of processors can be reported wrongly by the BIOS.
+	 * Don't trust it blindly
+	 */
+	if (per_cpu(processor_device_array, pr->id) != NULL &&
+	    per_cpu(processor_device_array, pr->id) != device) {
+		printk(KERN_WARNING "BIOS reported wrong ACPI id "
+			"for the processor\n");
+		result = -ENODEV;
+		goto err_free_cpumask;
+	}
+	per_cpu(processor_device_array, pr->id) = device;
+
+	per_cpu(processors, pr->id) = pr;
+
+	result = acpi_processor_add_fs(device);
+	if (result)
+		goto err_free_cpumask;
+
+	sysdev = get_cpu_sysdev(pr->id);
+	if (sysfs_create_link(&device->dev.kobj, &sysdev->kobj, "sysdev")) {
+		result = -EFAULT;
+		goto err_remove_fs;
+	}
+
+#ifdef CONFIG_CPU_FREQ
+	acpi_processor_ppc_has_changed(pr, 0);
+#endif
+	acpi_processor_get_throttling_info(pr);
+	acpi_processor_get_limit_info(pr);
+
+
+	acpi_processor_power_init(pr, device);
+
+	pr->cdev = thermal_cooling_device_register("Processor", device,
+						&processor_cooling_ops);
+	if (IS_ERR(pr->cdev)) {
+		result = PTR_ERR(pr->cdev);
+		goto err_power_exit;
+	}
+
+	dev_dbg(&device->dev, "registered as cooling_device%d\n",
+		 pr->cdev->id);
+
+	result = sysfs_create_link(&device->dev.kobj,
+				   &pr->cdev->device.kobj,
+				   "thermal_cooling");
+	if (result) {
+		printk(KERN_ERR PREFIX "Create sysfs link\n");
+		goto err_thermal_unregister;
+	}
+	result = sysfs_create_link(&pr->cdev->device.kobj,
+				   &device->dev.kobj,
+				   "device");
+	if (result) {
+		printk(KERN_ERR PREFIX "Create sysfs link\n");
+		goto err_remove_sysfs;
+	}
+
+	return 0;
+
+err_remove_sysfs:
+	sysfs_remove_link(&device->dev.kobj, "thermal_cooling");
+err_thermal_unregister:
+	thermal_cooling_device_unregister(pr->cdev);
+err_power_exit:
+	acpi_processor_power_exit(pr, device);
+err_remove_fs:
+	acpi_processor_remove_fs(device);
+err_free_cpumask:
+	free_cpumask_var(pr->throttling.shared_cpu_map);
+
+	return result;
+}
+
+static int acpi_processor_remove(struct acpi_device *device, int type)
+{
+	struct acpi_processor *pr = NULL;
+
+
+	if (!device || !acpi_driver_data(device))
+		return -EINVAL;
+
+	pr = acpi_driver_data(device);
+
+	if (pr->id >= nr_cpu_ids)
+		goto free;
+
+	if (type == ACPI_BUS_REMOVAL_EJECT) {
+		if (acpi_processor_handle_eject(pr))
+			return -EINVAL;
+	}
+
+	acpi_processor_power_exit(pr, device);
+
+	sysfs_remove_link(&device->dev.kobj, "sysdev");
+
+	acpi_processor_remove_fs(device);
+
+	if (pr->cdev) {
+		sysfs_remove_link(&device->dev.kobj, "thermal_cooling");
+		sysfs_remove_link(&pr->cdev->device.kobj, "device");
+		thermal_cooling_device_unregister(pr->cdev);
+		pr->cdev = NULL;
+	}
+
+	per_cpu(processors, pr->id) = NULL;
+	per_cpu(processor_device_array, pr->id) = NULL;
+
+free:
+	free_cpumask_var(pr->throttling.shared_cpu_map);
+	kfree(pr);
+
+	return 0;
+}
+
+#ifdef CONFIG_ACPI_HOTPLUG_CPU
+/****************************************************************************
+ * 	Acpi processor hotplug support 				       	    *
+ ****************************************************************************/
+
+static int is_processor_present(acpi_handle handle)
+{
+	acpi_status status;
+	unsigned long long sta = 0;
+
+
+	status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
+
+	if (ACPI_SUCCESS(status) && (sta & ACPI_STA_DEVICE_PRESENT))
+		return 1;
+
+	/*
+	 * _STA is mandatory for a processor that supports hot plug
+	 */
+	if (status == AE_NOT_FOUND)
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+				"Processor does not support hot plug\n"));
+	else
+		ACPI_EXCEPTION((AE_INFO, status,
+				"Processor Device is not present"));
+	return 0;
+}
+
+static
+int acpi_processor_device_add(acpi_handle handle, struct acpi_device **device)
+{
+	acpi_handle phandle;
+	struct acpi_device *pdev;
+
+
+	if (acpi_get_parent(handle, &phandle)) {
+		return -ENODEV;
+	}
+
+	if (acpi_bus_get_device(phandle, &pdev)) {
+		return -ENODEV;
+	}
+
+	if (acpi_bus_add(device, pdev, handle, ACPI_BUS_TYPE_PROCESSOR)) {
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static void __ref acpi_processor_hotplug_notify(acpi_handle handle,
+						u32 event, void *data)
+{
+	struct acpi_processor *pr;
+	struct acpi_device *device = NULL;
+	int result;
+
+
+	switch (event) {
+	case ACPI_NOTIFY_BUS_CHECK:
+	case ACPI_NOTIFY_DEVICE_CHECK:
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+		"Processor driver received %s event\n",
+		       (event == ACPI_NOTIFY_BUS_CHECK) ?
+		       "ACPI_NOTIFY_BUS_CHECK" : "ACPI_NOTIFY_DEVICE_CHECK"));
+
+		if (!is_processor_present(handle))
+			break;
+
+		if (acpi_bus_get_device(handle, &device)) {
+			result = acpi_processor_device_add(handle, &device);
+			if (result)
+				printk(KERN_ERR PREFIX
+					    "Unable to add the device\n");
+			break;
+		}
+		break;
+	case ACPI_NOTIFY_EJECT_REQUEST:
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+				  "received ACPI_NOTIFY_EJECT_REQUEST\n"));
+
+		if (acpi_bus_get_device(handle, &device)) {
+			printk(KERN_ERR PREFIX
+				    "Device don't exist, dropping EJECT\n");
+			break;
+		}
+		pr = acpi_driver_data(device);
+		if (!pr) {
+			printk(KERN_ERR PREFIX
+				    "Driver data is NULL, dropping EJECT\n");
+			return;
+		}
+		break;
+	default:
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+				  "Unsupported event [0x%x]\n", event));
+		break;
+	}
+
+	return;
+}
+
+static acpi_status
+processor_walk_namespace_cb(acpi_handle handle,
+			    u32 lvl, void *context, void **rv)
+{
+	acpi_status status;
+	int *action = context;
+	acpi_object_type type = 0;
+
+	status = acpi_get_type(handle, &type);
+	if (ACPI_FAILURE(status))
+		return (AE_OK);
+
+	if (type != ACPI_TYPE_PROCESSOR)
+		return (AE_OK);
+
+	switch (*action) {
+	case INSTALL_NOTIFY_HANDLER:
+		acpi_install_notify_handler(handle,
+					    ACPI_SYSTEM_NOTIFY,
+					    acpi_processor_hotplug_notify,
+					    NULL);
+		break;
+	case UNINSTALL_NOTIFY_HANDLER:
+		acpi_remove_notify_handler(handle,
+					   ACPI_SYSTEM_NOTIFY,
+					   acpi_processor_hotplug_notify);
+		break;
+	default:
+		break;
+	}
+
+	return (AE_OK);
+}
+
+static acpi_status acpi_processor_hotadd_init(acpi_handle handle, int *p_cpu)
+{
+
+	if (!is_processor_present(handle)) {
+		return AE_ERROR;
+	}
+
+	if (acpi_map_lsapic(handle, p_cpu))
+		return AE_ERROR;
+
+	if (arch_register_cpu(*p_cpu)) {
+		acpi_unmap_lsapic(*p_cpu);
+		return AE_ERROR;
+	}
+
+	return AE_OK;
+}
+
+static int acpi_processor_handle_eject(struct acpi_processor *pr)
+{
+	if (cpu_online(pr->id))
+		cpu_down(pr->id);
+
+	arch_unregister_cpu(pr->id);
+	acpi_unmap_lsapic(pr->id);
+	return (0);
+}
+#else
+static acpi_status acpi_processor_hotadd_init(acpi_handle handle, int *p_cpu)
+{
+	return AE_ERROR;
+}
+static int acpi_processor_handle_eject(struct acpi_processor *pr)
+{
+	return (-EINVAL);
+}
+#endif
+
+static
+void acpi_processor_install_hotplug_notify(void)
+{
+#ifdef CONFIG_ACPI_HOTPLUG_CPU
+	int action = INSTALL_NOTIFY_HANDLER;
+	acpi_walk_namespace(ACPI_TYPE_PROCESSOR,
+			    ACPI_ROOT_OBJECT,
+			    ACPI_UINT32_MAX,
+			    processor_walk_namespace_cb, NULL, &action, NULL);
+#endif
+	register_hotcpu_notifier(&acpi_cpu_notifier);
+}
+
+static
+void acpi_processor_uninstall_hotplug_notify(void)
+{
+#ifdef CONFIG_ACPI_HOTPLUG_CPU
+	int action = UNINSTALL_NOTIFY_HANDLER;
+	acpi_walk_namespace(ACPI_TYPE_PROCESSOR,
+			    ACPI_ROOT_OBJECT,
+			    ACPI_UINT32_MAX,
+			    processor_walk_namespace_cb, NULL, &action, NULL);
+#endif
+	unregister_hotcpu_notifier(&acpi_cpu_notifier);
+}
+
+/*
+ * We keep the driver loaded even when ACPI is not running.
+ * This is needed for the powernow-k8 driver, that works even without
+ * ACPI, but needs symbols from this driver
+ */
+
+static int __init acpi_processor_init(void)
+{
+	int result = 0;
+
+	if (acpi_disabled)
+		return 0;
+
+	memset(&errata, 0, sizeof(errata));
+
+#ifdef CONFIG_ACPI_PROCFS
+	acpi_processor_dir = proc_mkdir(ACPI_PROCESSOR_CLASS, acpi_root_dir);
+	if (!acpi_processor_dir)
+		return -ENOMEM;
+#endif
+	result = cpuidle_register_driver(&acpi_idle_driver);
+	if (result < 0)
+		goto out_proc;
+
+	result = acpi_bus_register_driver(&acpi_processor_driver);
+	if (result < 0)
+		goto out_cpuidle;
+
+	acpi_processor_install_hotplug_notify();
+
+	acpi_thermal_cpufreq_init();
+
+	acpi_processor_ppc_init();
+
+	acpi_processor_throttling_init();
+
+	return 0;
+
+out_cpuidle:
+	cpuidle_unregister_driver(&acpi_idle_driver);
+
+out_proc:
+#ifdef CONFIG_ACPI_PROCFS
+	remove_proc_entry(ACPI_PROCESSOR_CLASS, acpi_root_dir);
+#endif
+
+	return result;
+}
+
+static void __exit acpi_processor_exit(void)
+{
+	if (acpi_disabled)
+		return;
+
+	acpi_processor_ppc_exit();
+
+	acpi_thermal_cpufreq_exit();
+
+	acpi_processor_uninstall_hotplug_notify();
+
+	acpi_bus_unregister_driver(&acpi_processor_driver);
+
+	cpuidle_unregister_driver(&acpi_idle_driver);
+
+#ifdef CONFIG_ACPI_PROCFS
+	remove_proc_entry(ACPI_PROCESSOR_CLASS, acpi_root_dir);
+#endif
+
+	return;
+}
+
+module_init(acpi_processor_init);
+module_exit(acpi_processor_exit);
+
+EXPORT_SYMBOL(acpi_processor_set_thermal_limit);
+
+MODULE_ALIAS("processor");
diff --git a/drivers/acpi/processor_pdc.c b/drivers/acpi/processor_pdc.c
deleted file mode 100644
index e306ba9aa34e..000000000000
--- a/drivers/acpi/processor_pdc.c
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
- * Copyright (C) 2005 Intel Corporation
- * Copyright (C) 2009 Hewlett-Packard Development Company, L.P.
- *
- *	Alex Chiang <achiang@hp.com>
- *	- Unified x86/ia64 implementations
- *	Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
- *	- Added _PDC for platforms with Intel CPUs
- */
-#include <linux/dmi.h>
-
-#include <acpi/acpi_drivers.h>
-#include <acpi/processor.h>
-
-#include "internal.h"
-
-#define PREFIX			"ACPI: "
-#define _COMPONENT		ACPI_PROCESSOR_COMPONENT
-ACPI_MODULE_NAME("processor_pdc");
-
-static int set_no_mwait(const struct dmi_system_id *id)
-{
-	printk(KERN_NOTICE PREFIX "%s detected - "
-		"disabling mwait for CPU C-states\n", id->ident);
-	idle_nomwait = 1;
-	return 0;
-}
-
-static struct dmi_system_id __cpuinitdata processor_idle_dmi_table[] = {
-	{
-	set_no_mwait, "IFL91 board", {
-	DMI_MATCH(DMI_BIOS_VENDOR, "COMPAL"),
-	DMI_MATCH(DMI_SYS_VENDOR, "ZEPTO"),
-	DMI_MATCH(DMI_PRODUCT_VERSION, "3215W"),
-	DMI_MATCH(DMI_BOARD_NAME, "IFL91") }, NULL},
-	{
-	set_no_mwait, "Extensa 5220", {
-	DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
-	DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
-	DMI_MATCH(DMI_PRODUCT_VERSION, "0100"),
-	DMI_MATCH(DMI_BOARD_NAME, "Columbia") }, NULL},
-	{},
-};
-
-static void acpi_set_pdc_bits(u32 *buf)
-{
-	buf[0] = ACPI_PDC_REVISION_ID;
-	buf[1] = 1;
-
-	/* Enable coordination with firmware's _TSD info */
-	buf[2] = ACPI_PDC_SMP_T_SWCOORD;
-
-	/* Twiddle arch-specific bits needed for _PDC */
-	arch_acpi_set_pdc_bits(buf);
-}
-
-static struct acpi_object_list *acpi_processor_alloc_pdc(void)
-{
-	struct acpi_object_list *obj_list;
-	union acpi_object *obj;
-	u32 *buf;
-
-	/* allocate and initialize pdc. It will be used later. */
-	obj_list = kmalloc(sizeof(struct acpi_object_list), GFP_KERNEL);
-	if (!obj_list) {
-		printk(KERN_ERR "Memory allocation error\n");
-		return NULL;
-	}
-
-	obj = kmalloc(sizeof(union acpi_object), GFP_KERNEL);
-	if (!obj) {
-		printk(KERN_ERR "Memory allocation error\n");
-		kfree(obj_list);
-		return NULL;
-	}
-
-	buf = kmalloc(12, GFP_KERNEL);
-	if (!buf) {
-		printk(KERN_ERR "Memory allocation error\n");
-		kfree(obj);
-		kfree(obj_list);
-		return NULL;
-	}
-
-	acpi_set_pdc_bits(buf);
-
-	obj->type = ACPI_TYPE_BUFFER;
-	obj->buffer.length = 12;
-	obj->buffer.pointer = (u8 *) buf;
-	obj_list->count = 1;
-	obj_list->pointer = obj;
-
-	return obj_list;
-}
-
-/*
- * _PDC is required for a BIOS-OS handshake for most of the newer
- * ACPI processor features.
- */
-static int
-acpi_processor_eval_pdc(acpi_handle handle, struct acpi_object_list *pdc_in)
-{
-	acpi_status status = AE_OK;
-
-	if (idle_nomwait) {
-		/*
-		 * If mwait is disabled for CPU C-states, the C2C3_FFH access
-		 * mode will be disabled in the parameter of _PDC object.
-		 * Of course C1_FFH access mode will also be disabled.
-		 */
-		union acpi_object *obj;
-		u32 *buffer = NULL;
-
-		obj = pdc_in->pointer;
-		buffer = (u32 *)(obj->buffer.pointer);
-		buffer[2] &= ~(ACPI_PDC_C_C2C3_FFH | ACPI_PDC_C_C1_FFH);
-
-	}
-	status = acpi_evaluate_object(handle, "_PDC", pdc_in, NULL);
-
-	if (ACPI_FAILURE(status))
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-		    "Could not evaluate _PDC, using legacy perf. control.\n"));
-
-	return status;
-}
-
-static int early_pdc_done;
-
-void acpi_processor_set_pdc(acpi_handle handle)
-{
-	struct acpi_object_list *obj_list;
-
-	if (arch_has_acpi_pdc() == false)
-		return;
-
-	if (early_pdc_done)
-		return;
-
-	obj_list = acpi_processor_alloc_pdc();
-	if (!obj_list)
-		return;
-
-	acpi_processor_eval_pdc(handle, obj_list);
-
-	kfree(obj_list->pointer->buffer.pointer);
-	kfree(obj_list->pointer);
-	kfree(obj_list);
-}
-EXPORT_SYMBOL_GPL(acpi_processor_set_pdc);
-
-static int early_pdc_optin;
-static int set_early_pdc_optin(const struct dmi_system_id *id)
-{
-	early_pdc_optin = 1;
-	return 0;
-}
-
-static int param_early_pdc_optin(char *s)
-{
-	early_pdc_optin = 1;
-	return 1;
-}
-__setup("acpi_early_pdc_eval", param_early_pdc_optin);
-
-static struct dmi_system_id __cpuinitdata early_pdc_optin_table[] = {
-	{
-	set_early_pdc_optin, "HP Envy", {
-	DMI_MATCH(DMI_BIOS_VENDOR, "Hewlett-Packard"),
-	DMI_MATCH(DMI_PRODUCT_NAME, "HP Envy") }, NULL},
-	{
-	set_early_pdc_optin, "HP Pavilion dv6", {
-	DMI_MATCH(DMI_BIOS_VENDOR, "Hewlett-Packard"),
-	DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv6") }, NULL},
-	{
-	set_early_pdc_optin, "HP Pavilion dv7", {
-	DMI_MATCH(DMI_BIOS_VENDOR, "Hewlett-Packard"),
-	DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv7") }, NULL},
-	{},
-};
-
-static acpi_status
-early_init_pdc(acpi_handle handle, u32 lvl, void *context, void **rv)
-{
-	acpi_processor_set_pdc(handle);
-	return AE_OK;
-}
-
-void __init acpi_early_processor_set_pdc(void)
-{
-	/*
-	 * Check whether the system is DMI table. If yes, OSPM
-	 * should not use mwait for CPU-states.
-	 */
-	dmi_check_system(processor_idle_dmi_table);
-
-	/*
-	 * Allow systems to opt-in to early _PDC evaluation.
-	 */
-	dmi_check_system(early_pdc_optin_table);
-	if (!early_pdc_optin)
-		return;
-
-	acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT,
-			    ACPI_UINT32_MAX,
-			    early_init_pdc, NULL, NULL, NULL);
-
-	early_pdc_done = 1;
-}
diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c
index 7ded7542fc9d..29c6f5766dcf 100644
--- a/drivers/acpi/processor_throttling.c
+++ b/drivers/acpi/processor_throttling.c
@@ -1133,9 +1133,6 @@ int acpi_processor_get_throttling_info(struct acpi_processor *pr)
 	int result = 0;
 	struct acpi_processor_throttling *pthrottling;
 
-	if (!pr)
-		return -EINVAL;
-
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 			  "pblk_address[0x%08x] duty_offset[%d] duty_width[%d]\n",
 			  pr->throttling.address,
diff --git a/drivers/acpi/sbs.c b/drivers/acpi/sbs.c
index b16ddbf23a9c..89ad11138e48 100644
--- a/drivers/acpi/sbs.c
+++ b/drivers/acpi/sbs.c
@@ -217,6 +217,9 @@ static int acpi_sbs_battery_get_property(struct power_supply *psy,
 	case POWER_SUPPLY_PROP_TECHNOLOGY:
 		val->intval = acpi_battery_technology(battery);
 		break;
+	case POWER_SUPPLY_PROP_CYCLE_COUNT:
+		val->intval = battery->cycle_count;
+		break;
 	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
 		val->intval = battery->design_voltage *
 			acpi_battery_vscale(battery) * 1000;
@@ -276,6 +279,7 @@ static enum power_supply_property sbs_charge_battery_props[] = {
 	POWER_SUPPLY_PROP_STATUS,
 	POWER_SUPPLY_PROP_PRESENT,
 	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_CYCLE_COUNT,
 	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
 	POWER_SUPPLY_PROP_VOLTAGE_NOW,
 	POWER_SUPPLY_PROP_CURRENT_NOW,
@@ -560,6 +564,7 @@ static int acpi_battery_read_info(struct seq_file *seq, void *offset)
 		   battery->design_voltage * acpi_battery_vscale(battery));
 	seq_printf(seq, "design capacity warning: unknown\n");
 	seq_printf(seq, "design capacity low:     unknown\n");
+	seq_printf(seq, "cycle count:		  %i\n", battery->cycle_count);
 	seq_printf(seq, "capacity granularity 1:  unknown\n");
 	seq_printf(seq, "capacity granularity 2:  unknown\n");
 	seq_printf(seq, "model number:            %s\n", battery->device_name);
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index 3bde594a9979..f74834a544fd 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -552,8 +552,17 @@ static void acpi_hibernation_leave(void)
 	hibernate_nvs_restore();
 }
 
-static void acpi_pm_enable_gpes(void)
+static int acpi_pm_pre_restore(void)
 {
+	acpi_disable_all_gpes();
+	acpi_os_wait_events_complete(NULL);
+	acpi_ec_suspend_transactions();
+	return 0;
+}
+
+static void acpi_pm_restore_cleanup(void)
+{
+	acpi_ec_resume_transactions();
 	acpi_enable_all_runtime_gpes();
 }
 
@@ -565,8 +574,8 @@ static struct platform_hibernation_ops acpi_hibernation_ops = {
 	.prepare = acpi_pm_prepare,
 	.enter = acpi_hibernation_enter,
 	.leave = acpi_hibernation_leave,
-	.pre_restore = acpi_pm_disable_gpes,
-	.restore_cleanup = acpi_pm_enable_gpes,
+	.pre_restore = acpi_pm_pre_restore,
+	.restore_cleanup = acpi_pm_restore_cleanup,
 };
 
 /**
@@ -618,8 +627,8 @@ static struct platform_hibernation_ops acpi_hibernation_ops_old = {
 	.prepare = acpi_pm_disable_gpes,
 	.enter = acpi_hibernation_enter,
 	.leave = acpi_hibernation_leave,
-	.pre_restore = acpi_pm_disable_gpes,
-	.restore_cleanup = acpi_pm_enable_gpes,
+	.pre_restore = acpi_pm_pre_restore,
+	.restore_cleanup = acpi_pm_restore_cleanup,
 	.recover = acpi_pm_finish,
 };
 #endif /* CONFIG_HIBERNATION */
diff --git a/drivers/acpi/system.c b/drivers/acpi/system.c
index a206a12da78a..743f2445e2a1 100644
--- a/drivers/acpi/system.c
+++ b/drivers/acpi/system.c
@@ -101,6 +101,7 @@ static void acpi_table_attr_init(struct acpi_table_attr *table_attr,
 	struct acpi_table_header *header = NULL;
 	struct acpi_table_attr *attr = NULL;
 
+	sysfs_attr_init(&table_attr->attr.attr);
 	if (table_header->signature[0] != '\0')
 		memcpy(table_attr->name, table_header->signature,
 			ACPI_NAME_SIZE);
@@ -475,6 +476,7 @@ void acpi_irq_stats_init(void)
 			goto fail;
 		strncpy(name, buffer, strlen(buffer) + 1);
 
+		sysfs_attr_init(&counter_attrs[i].attr);
 		counter_attrs[i].attr.name = name;
 		counter_attrs[i].attr.mode = 0644;
 		counter_attrs[i].show = counter_show;
diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index 9073ada88835..5d3893558cf7 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -368,7 +368,7 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
 	int valid = 0;
 	int i;
 
-	/* Critical Shutdown (required) */
+	/* Critical Shutdown */
 	if (flag & ACPI_TRIPS_CRITICAL) {
 		status = acpi_evaluate_integer(tz->device->handle,
 				"_CRT", NULL, &tmp);
@@ -379,17 +379,19 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
 		 * Below zero (Celsius) values clearly aren't right for sure..
 		 * ... so lets discard those as invalid.
 		 */
-		if (ACPI_FAILURE(status) ||
-				tz->trips.critical.temperature <= 2732) {
+		if (ACPI_FAILURE(status)) {
+			tz->trips.critical.flags.valid = 0;
+			ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+					  "No critical threshold\n"));
+		} else if (tmp <= 2732) {
+			printk(KERN_WARNING FW_BUG "Invalid critical threshold "
+			       "(%llu)\n", tmp);
 			tz->trips.critical.flags.valid = 0;
-			ACPI_EXCEPTION((AE_INFO, status,
-					"No or invalid critical threshold"));
-			return -ENODEV;
 		} else {
 			tz->trips.critical.flags.valid = 1;
 			ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-					"Found critical threshold [%lu]\n",
-					tz->trips.critical.temperature));
+					  "Found critical threshold [%lu]\n",
+					  tz->trips.critical.temperature));
 		}
 		if (tz->trips.critical.flags.valid == 1) {
 			if (crt == -1) {
@@ -575,7 +577,23 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
 
 static int acpi_thermal_get_trip_points(struct acpi_thermal *tz)
 {
-	return acpi_thermal_trips_update(tz, ACPI_TRIPS_INIT);
+	int i, valid, ret = acpi_thermal_trips_update(tz, ACPI_TRIPS_INIT);
+
+	if (ret)
+		return ret;
+
+	valid = tz->trips.critical.flags.valid |
+		tz->trips.hot.flags.valid |
+		tz->trips.passive.flags.valid;
+
+	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++)
+		valid |= tz->trips.active[i].flags.valid;
+
+	if (!valid) {
+		printk(KERN_WARNING FW_BUG "No valid trip found\n");
+		return -ENODEV;
+	}
+	return 0;
 }
 
 static void acpi_thermal_check(void *data)
diff --git a/drivers/acpi/utils.c b/drivers/acpi/utils.c
index 11882dbe2094..c9a49f4747e6 100644
--- a/drivers/acpi/utils.c
+++ b/drivers/acpi/utils.c
@@ -289,51 +289,6 @@ acpi_evaluate_integer(acpi_handle handle,
 
 EXPORT_SYMBOL(acpi_evaluate_integer);
 
-#if 0
-acpi_status
-acpi_evaluate_string(acpi_handle handle,
-		     acpi_string pathname,
-		     acpi_object_list * arguments, acpi_string * data)
-{
-	acpi_status status = AE_OK;
-	acpi_object *element = NULL;
-	acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
-
-
-	if (!data)
-		return AE_BAD_PARAMETER;
-
-	status = acpi_evaluate_object(handle, pathname, arguments, &buffer);
-	if (ACPI_FAILURE(status)) {
-		acpi_util_eval_error(handle, pathname, status);
-		return status;
-	}
-
-	element = (acpi_object *) buffer.pointer;
-
-	if ((element->type != ACPI_TYPE_STRING)
-	    || (element->type != ACPI_TYPE_BUFFER)
-	    || !element->string.length) {
-		acpi_util_eval_error(handle, pathname, AE_BAD_DATA);
-		return AE_BAD_DATA;
-	}
-
-	*data = kzalloc(element->string.length + 1, GFP_KERNEL);
-	if (!data) {
-		printk(KERN_ERR PREFIX "Memory allocation\n");
-		return -ENOMEM;
-	}
-
-	memcpy(*data, element->string.pointer, element->string.length);
-
-	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Return value [%s]\n", *data));
-
-	kfree(buffer.pointer);
-
-	return AE_OK;
-}
-#endif
-
 acpi_status
 acpi_evaluate_reference(acpi_handle handle,
 			acpi_string pathname,
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 6e9b49149fce..cbe6f3924a10 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -327,7 +327,7 @@ static int acpi_video_device_lcd_set_level(struct acpi_video_device *device,
 			int level);
 static int acpi_video_device_lcd_get_level_current(
 			struct acpi_video_device *device,
-			unsigned long long *level);
+			unsigned long long *level, int init);
 static int acpi_video_get_next_level(struct acpi_video_device *device,
 				     u32 level_current, u32 event);
 static int acpi_video_switch_brightness(struct acpi_video_device *device,
@@ -345,7 +345,7 @@ static int acpi_video_get_brightness(struct backlight_device *bd)
 	struct acpi_video_device *vd =
 		(struct acpi_video_device *)bl_get_data(bd);
 
-	if (acpi_video_device_lcd_get_level_current(vd, &cur_level))
+	if (acpi_video_device_lcd_get_level_current(vd, &cur_level, 0))
 		return -EINVAL;
 	for (i = 2; i < vd->brightness->count; i++) {
 		if (vd->brightness->levels[i] == cur_level)
@@ -414,7 +414,7 @@ static int video_get_cur_state(struct thermal_cooling_device *cooling_dev, unsig
 	unsigned long long level;
 	int offset;
 
-	if (acpi_video_device_lcd_get_level_current(video, &level))
+	if (acpi_video_device_lcd_get_level_current(video, &level, 0))
 		return -EINVAL;
 	for (offset = 2; offset < video->brightness->count; offset++)
 		if (level == video->brightness->levels[offset]) {
@@ -609,7 +609,7 @@ static struct dmi_system_id video_dmi_table[] __initdata = {
 
 static int
 acpi_video_device_lcd_get_level_current(struct acpi_video_device *device,
-					unsigned long long *level)
+					unsigned long long *level, int init)
 {
 	acpi_status status = AE_OK;
 	int i;
@@ -633,10 +633,16 @@ acpi_video_device_lcd_get_level_current(struct acpi_video_device *device,
 					device->brightness->curr = *level;
 					return 0;
 			}
-			/* BQC returned an invalid level. Stop using it.  */
-			ACPI_WARNING((AE_INFO, "%s returned an invalid level",
-						buf));
-			device->cap._BQC = device->cap._BCQ = 0;
+			if (!init) {
+				/*
+				 * BQC returned an invalid level.
+				 * Stop using it.
+				 */
+				ACPI_WARNING((AE_INFO,
+					      "%s returned an invalid level",
+					      buf));
+				device->cap._BQC = device->cap._BCQ = 0;
+			}
 		} else {
 			/* Fixme:
 			 * should we return an error or ignore this failure?
@@ -892,7 +898,7 @@ acpi_video_init_brightness(struct acpi_video_device *device)
 	if (!device->cap._BQC)
 		goto set_level;
 
-	result = acpi_video_device_lcd_get_level_current(device, &level_old);
+	result = acpi_video_device_lcd_get_level_current(device, &level_old, 1);
 	if (result)
 		goto out_free_levels;
 
@@ -903,7 +909,7 @@ acpi_video_init_brightness(struct acpi_video_device *device)
 	if (result)
 		goto out_free_levels;
 
-	result = acpi_video_device_lcd_get_level_current(device, &level);
+	result = acpi_video_device_lcd_get_level_current(device, &level, 0);
 	if (result)
 		goto out_free_levels;
 
@@ -992,6 +998,7 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device)
 	}
 
 	if (acpi_video_backlight_support()) {
+		struct backlight_properties props;
 		int result;
 		static int count = 0;
 		char *name;
@@ -1004,12 +1011,14 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device)
 			return;
 
 		sprintf(name, "acpi_video%d", count++);
-		device->backlight = backlight_device_register(name,
-			NULL, device, &acpi_backlight_ops);
+		memset(&props, 0, sizeof(struct backlight_properties));
+		props.max_brightness = device->brightness->count - 3;
+		device->backlight = backlight_device_register(name, NULL, device,
+							      &acpi_backlight_ops,
+							      &props);
 		kfree(name);
 		if (IS_ERR(device->backlight))
 			return;
-		device->backlight->props.max_brightness = device->brightness->count-3;
 
 		result = sysfs_create_link(&device->backlight->dev.kobj,
 					   &device->dev->dev.kobj, "device");
@@ -1996,7 +2005,7 @@ acpi_video_switch_brightness(struct acpi_video_device *device, int event)
 		goto out;
 
 	result = acpi_video_device_lcd_get_level_current(device,
-							 &level_current);
+							 &level_current, 0);
 	if (result)
 		goto out;
 
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 6bd930b93bcc..fdc9bcbe55a2 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -641,6 +641,21 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(NVIDIA, 0x055a), board_ahci_yesncq },	/* MCP67 */
 	{ PCI_VDEVICE(NVIDIA, 0x055b), board_ahci_yesncq },	/* MCP67 */
 	{ PCI_VDEVICE(NVIDIA, 0x0580), board_ahci_yesncq },	/* Linux ID */
+	{ PCI_VDEVICE(NVIDIA, 0x0581), board_ahci_yesncq },	/* Linux ID */
+	{ PCI_VDEVICE(NVIDIA, 0x0582), board_ahci_yesncq },	/* Linux ID */
+	{ PCI_VDEVICE(NVIDIA, 0x0583), board_ahci_yesncq },	/* Linux ID */
+	{ PCI_VDEVICE(NVIDIA, 0x0584), board_ahci_yesncq },	/* Linux ID */
+	{ PCI_VDEVICE(NVIDIA, 0x0585), board_ahci_yesncq },	/* Linux ID */
+	{ PCI_VDEVICE(NVIDIA, 0x0586), board_ahci_yesncq },	/* Linux ID */
+	{ PCI_VDEVICE(NVIDIA, 0x0587), board_ahci_yesncq },	/* Linux ID */
+	{ PCI_VDEVICE(NVIDIA, 0x0588), board_ahci_yesncq },	/* Linux ID */
+	{ PCI_VDEVICE(NVIDIA, 0x0589), board_ahci_yesncq },	/* Linux ID */
+	{ PCI_VDEVICE(NVIDIA, 0x058a), board_ahci_yesncq },	/* Linux ID */
+	{ PCI_VDEVICE(NVIDIA, 0x058b), board_ahci_yesncq },	/* Linux ID */
+	{ PCI_VDEVICE(NVIDIA, 0x058c), board_ahci_yesncq },	/* Linux ID */
+	{ PCI_VDEVICE(NVIDIA, 0x058d), board_ahci_yesncq },	/* Linux ID */
+	{ PCI_VDEVICE(NVIDIA, 0x058e), board_ahci_yesncq },	/* Linux ID */
+	{ PCI_VDEVICE(NVIDIA, 0x058f), board_ahci_yesncq },	/* Linux ID */
 	{ PCI_VDEVICE(NVIDIA, 0x07f0), board_ahci_yesncq },	/* MCP73 */
 	{ PCI_VDEVICE(NVIDIA, 0x07f1), board_ahci_yesncq },	/* MCP73 */
 	{ PCI_VDEVICE(NVIDIA, 0x07f2), board_ahci_yesncq },	/* MCP73 */
@@ -2263,7 +2278,7 @@ static void ahci_port_intr(struct ata_port *ap)
 	struct ahci_port_priv *pp = ap->private_data;
 	struct ahci_host_priv *hpriv = ap->host->private_data;
 	int resetting = !!(ap->pflags & ATA_PFLAG_RESETTING);
-	u32 status, qc_active;
+	u32 status, qc_active = 0;
 	int rc;
 
 	status = readl(port_mmio + PORT_IRQ_STAT);
@@ -2321,11 +2336,22 @@ static void ahci_port_intr(struct ata_port *ap)
 		}
 	}
 
-	/* pp->active_link is valid iff any command is in flight */
-	if (ap->qc_active && pp->active_link->sactive)
-		qc_active = readl(port_mmio + PORT_SCR_ACT);
-	else
-		qc_active = readl(port_mmio + PORT_CMD_ISSUE);
+	/* pp->active_link is not reliable once FBS is enabled, both
+	 * PORT_SCR_ACT and PORT_CMD_ISSUE should be checked because
+	 * NCQ and non-NCQ commands may be in flight at the same time.
+	 */
+	if (pp->fbs_enabled) {
+		if (ap->qc_active) {
+			qc_active = readl(port_mmio + PORT_SCR_ACT);
+			qc_active |= readl(port_mmio + PORT_CMD_ISSUE);
+		}
+	} else {
+		/* pp->active_link is valid iff any command is in flight */
+		if (ap->qc_active && pp->active_link->sactive)
+			qc_active = readl(port_mmio + PORT_SCR_ACT);
+		else
+			qc_active = readl(port_mmio + PORT_CMD_ISSUE);
+	}
 
 	rc = ata_qc_complete_multiple(ap, qc_active);
 
@@ -3022,6 +3048,14 @@ static bool ahci_broken_suspend(struct pci_dev *pdev)
 		 * On HP dv[4-6] and HDX18 with earlier BIOSen, link
 		 * to the harddisk doesn't become online after
 		 * resuming from STR.  Warn and fail suspend.
+		 *
+		 * http://bugzilla.kernel.org/show_bug.cgi?id=12276
+		 *
+		 * Use dates instead of versions to match as HP is
+		 * apparently recycling both product and version
+		 * strings.
+		 *
+		 * http://bugzilla.kernel.org/show_bug.cgi?id=15462
 		 */
 		{
 			.ident = "dv4",
@@ -3030,7 +3064,7 @@ static bool ahci_broken_suspend(struct pci_dev *pdev)
 				DMI_MATCH(DMI_PRODUCT_NAME,
 					  "HP Pavilion dv4 Notebook PC"),
 			},
-			.driver_data = "F.30", /* cutoff BIOS version */
+			.driver_data = "20090105",	/* F.30 */
 		},
 		{
 			.ident = "dv5",
@@ -3039,7 +3073,7 @@ static bool ahci_broken_suspend(struct pci_dev *pdev)
 				DMI_MATCH(DMI_PRODUCT_NAME,
 					  "HP Pavilion dv5 Notebook PC"),
 			},
-			.driver_data = "F.16", /* cutoff BIOS version */
+			.driver_data = "20090506",	/* F.16 */
 		},
 		{
 			.ident = "dv6",
@@ -3048,7 +3082,7 @@ static bool ahci_broken_suspend(struct pci_dev *pdev)
 				DMI_MATCH(DMI_PRODUCT_NAME,
 					  "HP Pavilion dv6 Notebook PC"),
 			},
-			.driver_data = "F.21",	/* cutoff BIOS version */
+			.driver_data = "20090423",	/* F.21 */
 		},
 		{
 			.ident = "HDX18",
@@ -3057,7 +3091,7 @@ static bool ahci_broken_suspend(struct pci_dev *pdev)
 				DMI_MATCH(DMI_PRODUCT_NAME,
 					  "HP HDX18 Notebook PC"),
 			},
-			.driver_data = "F.23",	/* cutoff BIOS version */
+			.driver_data = "20090430",	/* F.23 */
 		},
 		/*
 		 * Acer eMachines G725 has the same problem.  BIOS
@@ -3065,6 +3099,8 @@ static bool ahci_broken_suspend(struct pci_dev *pdev)
 		 * work.  Inbetween, there are V1.06, V2.06 and V3.03
 		 * that we don't have much idea about.  For now,
 		 * blacklist anything older than V3.04.
+		 *
+		 * http://bugzilla.kernel.org/show_bug.cgi?id=15104
 		 */
 		{
 			.ident = "G725",
@@ -3072,19 +3108,21 @@ static bool ahci_broken_suspend(struct pci_dev *pdev)
 				DMI_MATCH(DMI_SYS_VENDOR, "eMachines"),
 				DMI_MATCH(DMI_PRODUCT_NAME, "eMachines G725"),
 			},
-			.driver_data = "V3.04",	/* cutoff BIOS version */
+			.driver_data = "20091216",	/* V3.04 */
 		},
 		{ }	/* terminate list */
 	};
 	const struct dmi_system_id *dmi = dmi_first_match(sysids);
-	const char *ver;
+	int year, month, date;
+	char buf[9];
 
 	if (!dmi || pdev->bus->number || pdev->devfn != PCI_DEVFN(0x1f, 2))
 		return false;
 
-	ver = dmi_get_system_info(DMI_BIOS_VERSION);
+	dmi_get_date(DMI_BIOS_DATE, &year, &month, &date);
+	snprintf(buf, sizeof(buf), "%04d%02d%02d", year, month, date);
 
-	return !ver || strcmp(ver, dmi->driver_data) < 0;
+	return strcmp(buf, dmi->driver_data) < 0;
 }
 
 static bool ahci_broken_online(struct pci_dev *pdev)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 9c77b0d1a9d0..4a28420efff2 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2232,7 +2232,7 @@ retry:
 		 * Some drives were very specific about that exact sequence.
 		 *
 		 * Note that ATA4 says lba is mandatory so the second check
-		 * shoud never trigger.
+		 * should never trigger.
 		 */
 		if (ata_id_major_version(id) < 4 || !ata_id_has_lba(id)) {
 			err_mask = ata_dev_init_params(dev, id[3], id[6]);
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 02441fd57e9e..561dec2481cb 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -2287,7 +2287,7 @@ EXPORT_SYMBOL_GPL(ata_sff_postreset);
  *	@qc: command
  *
  *	Drain the FIFO and device of any stuck data following a command
- *	failing to complete. In some cases this is neccessary before a
+ *	failing to complete. In some cases this is necessary before a
  *	reset will recover the device.
  *
  */
diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c
index 294f3020a78a..8e5e13210426 100644
--- a/drivers/ata/pata_acpi.c
+++ b/drivers/ata/pata_acpi.c
@@ -161,7 +161,7 @@ static void pacpi_set_dmamode(struct ata_port *ap, struct ata_device *adev)
  *
  *	Called when the libata layer is about to issue a command. We wrap
  *	this interface so that we can load the correct ATA timings if
- *	neccessary.
+ *	necessary.
  */
 
 static unsigned int pacpi_qc_issue(struct ata_queued_cmd *qc)
diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c
index c86c71639a95..727a81ce4c9f 100644
--- a/drivers/ata/pata_hpt3x3.c
+++ b/drivers/ata/pata_hpt3x3.c
@@ -180,7 +180,7 @@ static void hpt3x3_init_chipset(struct pci_dev *dev)
  *	@id: Entry in match table
  *
  *	Perform basic initialisation. We set the device up so we access all
- *	ports via BAR4. This is neccessary to work around errata.
+ *	ports via BAR4. This is necessary to work around errata.
  */
 
 static int hpt3x3_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 36103531feeb..147de2fd66d2 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -131,7 +131,7 @@ static unsigned int ata_data_xfer_8bit(struct ata_device *dev,
  *	@qc: command
  *
  *	Drain the FIFO and device of any stuck data following a command
- *	failing to complete. In some cases this is neccessary before a
+ *	failing to complete. In some cases this is necessary before a
  *	reset will recover the device.
  *
  */
diff --git a/drivers/atm/lanai.c b/drivers/atm/lanai.c
index 7fe7c324e7ef..23d95054705b 100644
--- a/drivers/atm/lanai.c
+++ b/drivers/atm/lanai.c
@@ -306,11 +306,10 @@ static void vci_bitfield_iterate(struct lanai_dev *lanai,
 	const unsigned long *lp,
 	void (*func)(struct lanai_dev *,vci_t vci))
 {
-	vci_t vci = find_first_bit(lp, NUM_VCI);
-	while (vci < NUM_VCI) {
+	vci_t vci;
+
+	for_each_set_bit(vci, lp, NUM_VCI)
 		func(lanai, vci);
-		vci = find_next_bit(lp, NUM_VCI, vci + 1);
-	}
 }
 
 /* -------------------- BUFFER  UTILITIES: */
diff --git a/drivers/auxdisplay/cfag12864bfb.c b/drivers/auxdisplay/cfag12864bfb.c
index fe3a865be4e5..b0ca5a47f47d 100644
--- a/drivers/auxdisplay/cfag12864bfb.c
+++ b/drivers/auxdisplay/cfag12864bfb.c
@@ -81,7 +81,7 @@ static struct fb_ops cfag12864bfb_ops = {
 	.fb_mmap = cfag12864bfb_mmap,
 };
 
-static int __init cfag12864bfb_probe(struct platform_device *device)
+static int __devinit cfag12864bfb_probe(struct platform_device *device)
 {
 	int ret = -EINVAL;
  	struct fb_info *info = framebuffer_alloc(0, &device->dev);
diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig
index ee377270beb9..fd52c48ee762 100644
--- a/drivers/base/Kconfig
+++ b/drivers/base/Kconfig
@@ -3,35 +3,50 @@ menu "Generic Driver Options"
 config UEVENT_HELPER_PATH
 	string "path to uevent helper"
 	depends on HOTPLUG
-	default "/sbin/hotplug"
+	default ""
 	help
 	  Path to uevent helper program forked by the kernel for
 	  every uevent.
+	  Before the switch to the netlink-based uevent source, this was
+	  used to hook hotplug scripts into kernel device events. It
+	  usually pointed to a shell script at /sbin/hotplug.
+	  This should not be used today, because usual systems create
+	  many events at bootup or device discovery in a very short time
+	  frame. One forked process per event can create so many processes
+	  that it creates a high system load, or on smaller systems
+	  it is known to create out-of-memory situations during bootup.
 
 config DEVTMPFS
-	bool "Create a kernel maintained /dev tmpfs (EXPERIMENTAL)"
+	bool "Maintain a devtmpfs filesystem to mount at /dev"
 	depends on HOTPLUG && SHMEM && TMPFS
 	help
-	  This creates a tmpfs filesystem, and mounts it at bootup
-	  and mounts it at /dev. The kernel driver core creates device
-	  nodes for all registered devices in that filesystem. All device
-	  nodes are owned by root and have the default mode of 0600.
-	  Userspace can add and delete the nodes as needed. This is
-	  intended to simplify bootup, and make it possible to delay
-	  the initial coldplug at bootup done by udev in userspace.
-	  It should also provide a simpler way for rescue systems
-	  to bring up a kernel with dynamic major/minor numbers.
-	  Meaningful symlinks, permissions and device ownership must
-	  still be handled by userspace.
-	  If unsure, say N here.
+	  This creates a tmpfs filesystem instance early at bootup.
+	  In this filesystem, the kernel driver core maintains device
+	  nodes with their default names and permissions for all
+	  registered devices with an assigned major/minor number.
+	  Userspace can modify the filesystem content as needed, add
+	  symlinks, and apply needed permissions.
+	  It provides a fully functional /dev directory, where usually
+	  udev runs on top, managing permissions and adding meaningful
+	  symlinks.
+	  In very limited environments, it may provide a sufficient
+	  functional /dev without any further help. It also allows simple
+	  rescue systems, and reliably handles dynamic major/minor numbers.
 
 config DEVTMPFS_MOUNT
-	bool "Automount devtmpfs at /dev"
+	bool "Automount devtmpfs at /dev, after the kernel mounted the rootfs"
 	depends on DEVTMPFS
 	help
-	  This will mount devtmpfs at /dev if the kernel mounts the root
-	  filesystem. It will not affect initramfs based mounting.
-	  If unsure, say N here.
+	  This will instruct the kernel to automatically mount the
+	  devtmpfs filesystem at /dev, directly after the kernel has
+	  mounted the root filesystem. The behavior can be overridden
+	  with the commandline parameter: devtmpfs.mount=0|1.
+	  This option does not affect initramfs based booting, here
+	  the devtmpfs filesystem always needs to be mounted manually
+	  after the roots is mounted.
+	  With this option enabled, it allows to bring up a system in
+	  rescue mode with init=/bin/sh, even when the /dev directory
+	  on the rootfs is completely empty.
 
 config STANDALONE
 	bool "Select only drivers that don't need compile-time external firmware" if EXPERIMENTAL
diff --git a/drivers/base/bus.c b/drivers/base/bus.c
index c0c5a43d9fb3..71f6af5c8b0b 100644
--- a/drivers/base/bus.c
+++ b/drivers/base/bus.c
@@ -70,7 +70,7 @@ static ssize_t drv_attr_store(struct kobject *kobj, struct attribute *attr,
 	return ret;
 }
 
-static struct sysfs_ops driver_sysfs_ops = {
+static const struct sysfs_ops driver_sysfs_ops = {
 	.show	= drv_attr_show,
 	.store	= drv_attr_store,
 };
@@ -115,7 +115,7 @@ static ssize_t bus_attr_store(struct kobject *kobj, struct attribute *attr,
 	return ret;
 }
 
-static struct sysfs_ops bus_sysfs_ops = {
+static const struct sysfs_ops bus_sysfs_ops = {
 	.show	= bus_attr_show,
 	.store	= bus_attr_store,
 };
@@ -154,7 +154,7 @@ static int bus_uevent_filter(struct kset *kset, struct kobject *kobj)
 	return 0;
 }
 
-static struct kset_uevent_ops bus_uevent_ops = {
+static const struct kset_uevent_ops bus_uevent_ops = {
 	.filter = bus_uevent_filter,
 };
 
@@ -173,10 +173,10 @@ static ssize_t driver_unbind(struct device_driver *drv,
 	dev = bus_find_device_by_name(bus, NULL, buf);
 	if (dev && dev->driver == drv) {
 		if (dev->parent)	/* Needed for USB */
-			down(&dev->parent->sem);
+			device_lock(dev->parent);
 		device_release_driver(dev);
 		if (dev->parent)
-			up(&dev->parent->sem);
+			device_unlock(dev->parent);
 		err = count;
 	}
 	put_device(dev);
@@ -200,12 +200,12 @@ static ssize_t driver_bind(struct device_driver *drv,
 	dev = bus_find_device_by_name(bus, NULL, buf);
 	if (dev && dev->driver == NULL && driver_match_device(drv, dev)) {
 		if (dev->parent)	/* Needed for USB */
-			down(&dev->parent->sem);
-		down(&dev->sem);
+			device_lock(dev->parent);
+		device_lock(dev);
 		err = driver_probe_device(drv, dev);
-		up(&dev->sem);
+		device_unlock(dev);
 		if (dev->parent)
-			up(&dev->parent->sem);
+			device_unlock(dev->parent);
 
 		if (err > 0) {
 			/* success */
@@ -744,10 +744,10 @@ static int __must_check bus_rescan_devices_helper(struct device *dev,
 
 	if (!dev->driver) {
 		if (dev->parent)	/* Needed for USB */
-			down(&dev->parent->sem);
+			device_lock(dev->parent);
 		ret = device_attach(dev);
 		if (dev->parent)
-			up(&dev->parent->sem);
+			device_unlock(dev->parent);
 	}
 	return ret < 0 ? ret : 0;
 }
@@ -779,10 +779,10 @@ int device_reprobe(struct device *dev)
 {
 	if (dev->driver) {
 		if (dev->parent)        /* Needed for USB */
-			down(&dev->parent->sem);
+			device_lock(dev->parent);
 		device_release_driver(dev);
 		if (dev->parent)
-			up(&dev->parent->sem);
+			device_unlock(dev->parent);
 	}
 	return bus_rescan_devices_helper(dev, NULL);
 }
diff --git a/drivers/base/class.c b/drivers/base/class.c
index 6e2c3b064f53..9c6a0d6408e7 100644
--- a/drivers/base/class.c
+++ b/drivers/base/class.c
@@ -31,7 +31,7 @@ static ssize_t class_attr_show(struct kobject *kobj, struct attribute *attr,
 	ssize_t ret = -EIO;
 
 	if (class_attr->show)
-		ret = class_attr->show(cp->class, buf);
+		ret = class_attr->show(cp->class, class_attr, buf);
 	return ret;
 }
 
@@ -43,7 +43,7 @@ static ssize_t class_attr_store(struct kobject *kobj, struct attribute *attr,
 	ssize_t ret = -EIO;
 
 	if (class_attr->store)
-		ret = class_attr->store(cp->class, buf, count);
+		ret = class_attr->store(cp->class, class_attr, buf, count);
 	return ret;
 }
 
@@ -63,7 +63,7 @@ static void class_release(struct kobject *kobj)
 	kfree(cp);
 }
 
-static struct sysfs_ops class_sysfs_ops = {
+static const struct sysfs_ops class_sysfs_ops = {
 	.show	= class_attr_show,
 	.store	= class_attr_store,
 };
@@ -219,6 +219,8 @@ static void class_create_release(struct class *cls)
  * This is used to create a struct class pointer that can then be used
  * in calls to device_create().
  *
+ * Returns &struct class pointer on success, or ERR_PTR() on error.
+ *
  * Note, the pointer created here is to be destroyed when finished by
  * making a call to class_destroy().
  */
@@ -490,6 +492,16 @@ void class_interface_unregister(struct class_interface *class_intf)
 	class_put(parent);
 }
 
+ssize_t show_class_attr_string(struct class *class, struct class_attribute *attr,
+                        	char *buf)
+{
+	struct class_attribute_string *cs;
+	cs = container_of(attr, struct class_attribute_string, attr);
+	return snprintf(buf, PAGE_SIZE, "%s\n", cs->str);
+}
+
+EXPORT_SYMBOL_GPL(show_class_attr_string);
+
 struct class_compat {
 	struct kobject *kobj;
 };
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 282025770429..b56a0ba31d4a 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -100,7 +100,7 @@ static ssize_t dev_attr_store(struct kobject *kobj, struct attribute *attr,
 	return ret;
 }
 
-static struct sysfs_ops dev_sysfs_ops = {
+static const struct sysfs_ops dev_sysfs_ops = {
 	.show	= dev_attr_show,
 	.store	= dev_attr_store,
 };
@@ -252,7 +252,7 @@ static int dev_uevent(struct kset *kset, struct kobject *kobj,
 	return retval;
 }
 
-static struct kset_uevent_ops device_uevent_ops = {
+static const struct kset_uevent_ops device_uevent_ops = {
 	.filter =	dev_uevent_filter,
 	.name =		dev_uevent_name,
 	.uevent =	dev_uevent,
@@ -306,15 +306,10 @@ static ssize_t store_uevent(struct device *dev, struct device_attribute *attr,
 {
 	enum kobject_action action;
 
-	if (kobject_action_type(buf, count, &action) == 0) {
+	if (kobject_action_type(buf, count, &action) == 0)
 		kobject_uevent(&dev->kobj, action);
-		goto out;
-	}
-
-	dev_err(dev, "uevent: unsupported action-string; this will "
-		     "be ignored in a future kernel version\n");
-	kobject_uevent(&dev->kobj, KOBJ_ADD);
-out:
+	else
+		dev_err(dev, "uevent: unknown action-string\n");
 	return count;
 }
 
@@ -607,6 +602,7 @@ static struct kobject *get_device_parent(struct device *dev,
 	int retval;
 
 	if (dev->class) {
+		static DEFINE_MUTEX(gdp_mutex);
 		struct kobject *kobj = NULL;
 		struct kobject *parent_kobj;
 		struct kobject *k;
@@ -623,6 +619,8 @@ static struct kobject *get_device_parent(struct device *dev,
 		else
 			parent_kobj = &parent->kobj;
 
+		mutex_lock(&gdp_mutex);
+
 		/* find our class-directory at the parent and reference it */
 		spin_lock(&dev->class->p->class_dirs.list_lock);
 		list_for_each_entry(k, &dev->class->p->class_dirs.list, entry)
@@ -631,20 +629,26 @@ static struct kobject *get_device_parent(struct device *dev,
 				break;
 			}
 		spin_unlock(&dev->class->p->class_dirs.list_lock);
-		if (kobj)
+		if (kobj) {
+			mutex_unlock(&gdp_mutex);
 			return kobj;
+		}
 
 		/* or create a new class-directory at the parent device */
 		k = kobject_create();
-		if (!k)
+		if (!k) {
+			mutex_unlock(&gdp_mutex);
 			return NULL;
+		}
 		k->kset = &dev->class->p->class_dirs;
 		retval = kobject_add(k, parent_kobj, "%s", dev->class->name);
 		if (retval < 0) {
+			mutex_unlock(&gdp_mutex);
 			kobject_put(k);
 			return NULL;
 		}
 		/* do not emit an uevent for this simple "glue" directory */
+		mutex_unlock(&gdp_mutex);
 		return k;
 	}
 
@@ -1341,6 +1345,8 @@ static void root_device_release(struct device *dev)
  * 'module' symlink which points to the @owner directory
  * in sysfs.
  *
+ * Returns &struct device pointer on success, or ERR_PTR() on error.
+ *
  * Note: You probably want to use root_device_register().
  */
 struct device *__root_device_register(const char *name, struct module *owner)
@@ -1428,6 +1434,8 @@ static void device_create_release(struct device *dev)
  * Any further sysfs files that might be required can be created using this
  * pointer.
  *
+ * Returns &struct device pointer on success, or ERR_PTR() on error.
+ *
  * Note: the struct class passed to this function must have previously
  * been created with a call to class_create().
  */
@@ -1488,6 +1496,8 @@ EXPORT_SYMBOL_GPL(device_create_vargs);
  * Any further sysfs files that might be required can be created using this
  * pointer.
  *
+ * Returns &struct device pointer on success, or ERR_PTR() on error.
+ *
  * Note: the struct class passed to this function must have previously
  * been created with a call to class_create().
  */
@@ -1574,22 +1584,16 @@ int device_rename(struct device *dev, char *new_name)
 	if (old_class_name) {
 		new_class_name = make_class_name(dev->class->name, &dev->kobj);
 		if (new_class_name) {
-			error = sysfs_create_link_nowarn(&dev->parent->kobj,
-							 &dev->kobj,
-							 new_class_name);
-			if (error)
-				goto out;
-			sysfs_remove_link(&dev->parent->kobj, old_class_name);
+			error = sysfs_rename_link(&dev->parent->kobj,
+						  &dev->kobj,
+						  old_class_name,
+						  new_class_name);
 		}
 	}
 #else
 	if (dev->class) {
-		error = sysfs_create_link_nowarn(&dev->class->p->class_subsys.kobj,
-						 &dev->kobj, dev_name(dev));
-		if (error)
-			goto out;
-		sysfs_remove_link(&dev->class->p->class_subsys.kobj,
-				  old_device_name);
+		error = sysfs_rename_link(&dev->class->p->class_subsys.kobj,
+					  &dev->kobj, old_device_name, new_name);
 	}
 #endif
 
diff --git a/drivers/base/cpu.c b/drivers/base/cpu.c
index 958bd1540c30..b5242e1e8bc4 100644
--- a/drivers/base/cpu.c
+++ b/drivers/base/cpu.c
@@ -13,8 +13,11 @@
 
 #include "base.h"
 
+static struct sysdev_class_attribute *cpu_sysdev_class_attrs[];
+
 struct sysdev_class cpu_sysdev_class = {
 	.name = "cpu",
+	.attrs = cpu_sysdev_class_attrs,
 };
 EXPORT_SYMBOL(cpu_sysdev_class);
 
@@ -76,34 +79,24 @@ void unregister_cpu(struct cpu *cpu)
 }
 
 #ifdef CONFIG_ARCH_CPU_PROBE_RELEASE
-static ssize_t cpu_probe_store(struct class *class, const char *buf,
+static ssize_t cpu_probe_store(struct sysdev_class *class,
+			       struct sysdev_class_attribute *attr,
+			       const char *buf,
 			       size_t count)
 {
 	return arch_cpu_probe(buf, count);
 }
 
-static ssize_t cpu_release_store(struct class *class, const char *buf,
+static ssize_t cpu_release_store(struct sysdev_class *class,
+				 struct sysdev_class_attribute *attr,
+				 const char *buf,
 				 size_t count)
 {
 	return arch_cpu_release(buf, count);
 }
 
-static CLASS_ATTR(probe, S_IWUSR, NULL, cpu_probe_store);
-static CLASS_ATTR(release, S_IWUSR, NULL, cpu_release_store);
-
-int __init cpu_probe_release_init(void)
-{
-	int rc;
-
-	rc = sysfs_create_file(&cpu_sysdev_class.kset.kobj,
-			       &class_attr_probe.attr);
-	if (!rc)
-		rc = sysfs_create_file(&cpu_sysdev_class.kset.kobj,
-				       &class_attr_release.attr);
-
-	return rc;
-}
-device_initcall(cpu_probe_release_init);
+static SYSDEV_CLASS_ATTR(probe, S_IWUSR, NULL, cpu_probe_store);
+static SYSDEV_CLASS_ATTR(release, S_IWUSR, NULL, cpu_release_store);
 #endif /* CONFIG_ARCH_CPU_PROBE_RELEASE */
 
 #else /* ... !CONFIG_HOTPLUG_CPU */
@@ -141,31 +134,39 @@ static SYSDEV_ATTR(crash_notes, 0400, show_crash_notes, NULL);
 /*
  * Print cpu online, possible, present, and system maps
  */
-static ssize_t print_cpus_map(char *buf, const struct cpumask *map)
+
+struct cpu_attr {
+	struct sysdev_class_attribute attr;
+	const struct cpumask *const * const map;
+};
+
+static ssize_t show_cpus_attr(struct sysdev_class *class,
+			      struct sysdev_class_attribute *attr,
+			      char *buf)
 {
-	int n = cpulist_scnprintf(buf, PAGE_SIZE-2, map);
+	struct cpu_attr *ca = container_of(attr, struct cpu_attr, attr);
+	int n = cpulist_scnprintf(buf, PAGE_SIZE-2, *(ca->map));
 
 	buf[n++] = '\n';
 	buf[n] = '\0';
 	return n;
 }
 
-#define	print_cpus_func(type) \
-static ssize_t print_cpus_##type(struct sysdev_class *class, char *buf)	\
-{									\
-	return print_cpus_map(buf, cpu_##type##_mask);			\
-}									\
-static struct sysdev_class_attribute attr_##type##_map = 		\
-	_SYSDEV_CLASS_ATTR(type, 0444, print_cpus_##type, NULL)
+#define _CPU_ATTR(name, map)						\
+	{ _SYSDEV_CLASS_ATTR(name, 0444, show_cpus_attr, NULL), map }
 
-print_cpus_func(online);
-print_cpus_func(possible);
-print_cpus_func(present);
+/* Keep in sync with cpu_sysdev_class_attrs */
+static struct cpu_attr cpu_attrs[] = {
+	_CPU_ATTR(online, &cpu_online_mask),
+	_CPU_ATTR(possible, &cpu_possible_mask),
+	_CPU_ATTR(present, &cpu_present_mask),
+};
 
 /*
  * Print values for NR_CPUS and offlined cpus
  */
-static ssize_t print_cpus_kernel_max(struct sysdev_class *class, char *buf)
+static ssize_t print_cpus_kernel_max(struct sysdev_class *class,
+				     struct sysdev_class_attribute *attr, char *buf)
 {
 	int n = snprintf(buf, PAGE_SIZE-2, "%d\n", NR_CPUS - 1);
 	return n;
@@ -175,7 +176,8 @@ static SYSDEV_CLASS_ATTR(kernel_max, 0444, print_cpus_kernel_max, NULL);
 /* arch-optional setting to enable display of offline cpus >= nr_cpu_ids */
 unsigned int total_cpus;
 
-static ssize_t print_cpus_offline(struct sysdev_class *class, char *buf)
+static ssize_t print_cpus_offline(struct sysdev_class *class,
+				  struct sysdev_class_attribute *attr, char *buf)
 {
 	int n = 0, len = PAGE_SIZE-2;
 	cpumask_var_t offline;
@@ -204,29 +206,6 @@ static ssize_t print_cpus_offline(struct sysdev_class *class, char *buf)
 }
 static SYSDEV_CLASS_ATTR(offline, 0444, print_cpus_offline, NULL);
 
-static struct sysdev_class_attribute *cpu_state_attr[] = {
-	&attr_online_map,
-	&attr_possible_map,
-	&attr_present_map,
-	&attr_kernel_max,
-	&attr_offline,
-};
-
-static int cpu_states_init(void)
-{
-	int i;
-	int err = 0;
-
-	for (i = 0;  i < ARRAY_SIZE(cpu_state_attr); i++) {
-		int ret;
-		ret = sysdev_class_create_file(&cpu_sysdev_class,
-						cpu_state_attr[i]);
-		if (!err)
-			err = ret;
-	}
-	return err;
-}
-
 /*
  * register_cpu - Setup a sysfs device for a CPU.
  * @cpu - cpu->hotpluggable field set to 1 will generate a control file in
@@ -272,9 +251,6 @@ int __init cpu_dev_init(void)
 	int err;
 
 	err = sysdev_class_register(&cpu_sysdev_class);
-	if (!err)
-		err = cpu_states_init();
-
 #if defined(CONFIG_SCHED_MC) || defined(CONFIG_SCHED_SMT)
 	if (!err)
 		err = sched_create_sysfs_power_savings_entries(&cpu_sysdev_class);
@@ -282,3 +258,16 @@ int __init cpu_dev_init(void)
 
 	return err;
 }
+
+static struct sysdev_class_attribute *cpu_sysdev_class_attrs[] = {
+#ifdef CONFIG_ARCH_CPU_PROBE_RELEASE
+	&attr_probe,
+	&attr_release,
+#endif
+	&cpu_attrs[0].attr,
+	&cpu_attrs[1].attr,
+	&cpu_attrs[2].attr,
+	&attr_kernel_max,
+	&attr_offline,
+	NULL
+};
diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index ee95c76bfd3d..c89291f8a16b 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -85,7 +85,7 @@ static void driver_sysfs_remove(struct device *dev)
  * for before calling this. (It is ok to call with no other effort
  * from a driver's probe() method.)
  *
- * This function must be called with @dev->sem held.
+ * This function must be called with the device lock held.
  */
 int device_bind_driver(struct device *dev)
 {
@@ -190,8 +190,8 @@ EXPORT_SYMBOL_GPL(wait_for_device_probe);
  * This function returns -ENODEV if the device is not registered,
  * 1 if the device is bound successfully and 0 otherwise.
  *
- * This function must be called with @dev->sem held.  When called for a
- * USB interface, @dev->parent->sem must be held as well.
+ * This function must be called with @dev lock held.  When called for a
+ * USB interface, @dev->parent lock must be held as well.
  */
 int driver_probe_device(struct device_driver *drv, struct device *dev)
 {
@@ -233,13 +233,13 @@ static int __device_attach(struct device_driver *drv, void *data)
  * 0 if no matching driver was found;
  * -ENODEV if the device is not registered.
  *
- * When called for a USB interface, @dev->parent->sem must be held.
+ * When called for a USB interface, @dev->parent lock must be held.
  */
 int device_attach(struct device *dev)
 {
 	int ret = 0;
 
-	down(&dev->sem);
+	device_lock(dev);
 	if (dev->driver) {
 		ret = device_bind_driver(dev);
 		if (ret == 0)
@@ -253,7 +253,7 @@ int device_attach(struct device *dev)
 		ret = bus_for_each_drv(dev->bus, NULL, dev, __device_attach);
 		pm_runtime_put_sync(dev);
 	}
-	up(&dev->sem);
+	device_unlock(dev);
 	return ret;
 }
 EXPORT_SYMBOL_GPL(device_attach);
@@ -276,13 +276,13 @@ static int __driver_attach(struct device *dev, void *data)
 		return 0;
 
 	if (dev->parent)	/* Needed for USB */
-		down(&dev->parent->sem);
-	down(&dev->sem);
+		device_lock(dev->parent);
+	device_lock(dev);
 	if (!dev->driver)
 		driver_probe_device(drv, dev);
-	up(&dev->sem);
+	device_unlock(dev);
 	if (dev->parent)
-		up(&dev->parent->sem);
+		device_unlock(dev->parent);
 
 	return 0;
 }
@@ -303,8 +303,8 @@ int driver_attach(struct device_driver *drv)
 EXPORT_SYMBOL_GPL(driver_attach);
 
 /*
- * __device_release_driver() must be called with @dev->sem held.
- * When called for a USB interface, @dev->parent->sem must be held as well.
+ * __device_release_driver() must be called with @dev lock held.
+ * When called for a USB interface, @dev->parent lock must be held as well.
  */
 static void __device_release_driver(struct device *dev)
 {
@@ -343,7 +343,7 @@ static void __device_release_driver(struct device *dev)
  * @dev: device.
  *
  * Manually detach device from driver.
- * When called for a USB interface, @dev->parent->sem must be held.
+ * When called for a USB interface, @dev->parent lock must be held.
  */
 void device_release_driver(struct device *dev)
 {
@@ -352,9 +352,9 @@ void device_release_driver(struct device *dev)
 	 * within their ->remove callback for the same device, they
 	 * will deadlock right here.
 	 */
-	down(&dev->sem);
+	device_lock(dev);
 	__device_release_driver(dev);
-	up(&dev->sem);
+	device_unlock(dev);
 }
 EXPORT_SYMBOL_GPL(device_release_driver);
 
@@ -381,13 +381,13 @@ void driver_detach(struct device_driver *drv)
 		spin_unlock(&drv->p->klist_devices.k_lock);
 
 		if (dev->parent)	/* Needed for USB */
-			down(&dev->parent->sem);
-		down(&dev->sem);
+			device_lock(dev->parent);
+		device_lock(dev);
 		if (dev->driver == drv)
 			__device_release_driver(dev);
-		up(&dev->sem);
+		device_unlock(dev);
 		if (dev->parent)
-			up(&dev->parent->sem);
+			device_unlock(dev->parent);
 		put_device(dev);
 	}
 }
diff --git a/drivers/base/devtmpfs.c b/drivers/base/devtmpfs.c
index 42ae452b36b0..dac478c6e460 100644
--- a/drivers/base/devtmpfs.c
+++ b/drivers/base/devtmpfs.c
@@ -301,6 +301,19 @@ int devtmpfs_delete_node(struct device *dev)
 		if (dentry->d_inode) {
 			err = vfs_getattr(nd.path.mnt, dentry, &stat);
 			if (!err && dev_mynode(dev, dentry->d_inode, &stat)) {
+				struct iattr newattrs;
+				/*
+				 * before unlinking this node, reset permissions
+				 * of possible references like hardlinks
+				 */
+				newattrs.ia_uid = 0;
+				newattrs.ia_gid = 0;
+				newattrs.ia_mode = stat.mode & ~0777;
+				newattrs.ia_valid =
+					ATTR_UID|ATTR_GID|ATTR_MODE;
+				mutex_lock(&dentry->d_inode->i_mutex);
+				notify_change(dentry, &newattrs);
+				mutex_unlock(&dentry->d_inode->i_mutex);
 				err = vfs_unlink(nd.path.dentry->d_inode,
 						 dentry);
 				if (!err || err == -ENOENT)
diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c
index a95024166b66..18518ba13c81 100644
--- a/drivers/base/firmware_class.c
+++ b/drivers/base/firmware_class.c
@@ -19,7 +19,6 @@
 #include <linux/kthread.h>
 #include <linux/highmem.h>
 #include <linux/firmware.h>
-#include "base.h"
 
 #define to_dev(obj) container_of(obj, struct device, kobj)
 
@@ -69,7 +68,9 @@ fw_load_abort(struct firmware_priv *fw_priv)
 }
 
 static ssize_t
-firmware_timeout_show(struct class *class, char *buf)
+firmware_timeout_show(struct class *class,
+		      struct class_attribute *attr,
+		      char *buf)
 {
 	return sprintf(buf, "%d\n", loading_timeout);
 }
@@ -77,6 +78,7 @@ firmware_timeout_show(struct class *class, char *buf)
 /**
  * firmware_timeout_store - set number of seconds to wait for firmware
  * @class: device class pointer
+ * @attr: device attribute pointer
  * @buf: buffer to scan for timeout value
  * @count: number of bytes in @buf
  *
@@ -87,7 +89,9 @@ firmware_timeout_show(struct class *class, char *buf)
  *	Note: zero means 'wait forever'.
  **/
 static ssize_t
-firmware_timeout_store(struct class *class, const char *buf, size_t count)
+firmware_timeout_store(struct class *class,
+			struct class_attribute *attr,
+			const char *buf, size_t count)
 {
 	loading_timeout = simple_strtol(buf, NULL, 10);
 	if (loading_timeout < 0)
@@ -439,6 +443,7 @@ static int fw_setup_device(struct firmware *fw, struct device **dev_p,
 	fw_priv = dev_get_drvdata(f_dev);
 
 	fw_priv->fw = fw;
+	sysfs_bin_attr_init(&fw_priv->attr_data);
 	retval = sysfs_create_bin_file(&f_dev->kobj, &fw_priv->attr_data);
 	if (retval) {
 		dev_err(device, "%s: sysfs_create_bin_file failed\n", __func__);
@@ -610,7 +615,7 @@ request_firmware_work_func(void *arg)
 }
 
 /**
- * request_firmware_nowait: asynchronous version of request_firmware
+ * request_firmware_nowait - asynchronous version of request_firmware
  * @module: module requesting the firmware
  * @uevent: sends uevent to copy the firmware image if this flag
  *	is non-zero else the firmware copy must be done manually.
diff --git a/drivers/base/memory.c b/drivers/base/memory.c
index bd025059711f..db0848e54cc6 100644
--- a/drivers/base/memory.c
+++ b/drivers/base/memory.c
@@ -44,7 +44,7 @@ static int memory_uevent(struct kset *kset, struct kobject *obj, struct kobj_uev
 	return retval;
 }
 
-static struct kset_uevent_ops memory_uevent_ops = {
+static const struct kset_uevent_ops memory_uevent_ops = {
 	.name		= memory_uevent_name,
 	.uevent		= memory_uevent,
 };
@@ -309,17 +309,18 @@ static SYSDEV_ATTR(removable, 0444, show_mem_removable, NULL);
  * Block size attribute stuff
  */
 static ssize_t
-print_block_size(struct class *class, char *buf)
+print_block_size(struct sysdev_class *class, struct sysdev_class_attribute *attr,
+		 char *buf)
 {
 	return sprintf(buf, "%#lx\n", (unsigned long)PAGES_PER_SECTION * PAGE_SIZE);
 }
 
-static CLASS_ATTR(block_size_bytes, 0444, print_block_size, NULL);
+static SYSDEV_CLASS_ATTR(block_size_bytes, 0444, print_block_size, NULL);
 
 static int block_size_init(void)
 {
 	return sysfs_create_file(&memory_sysdev_class.kset.kobj,
-				&class_attr_block_size_bytes.attr);
+				&attr_block_size_bytes.attr);
 }
 
 /*
@@ -330,7 +331,8 @@ static int block_size_init(void)
  */
 #ifdef CONFIG_ARCH_MEMORY_PROBE
 static ssize_t
-memory_probe_store(struct class *class, const char *buf, size_t count)
+memory_probe_store(struct class *class, struct class_attribute *attr,
+		   const char *buf, size_t count)
 {
 	u64 phys_addr;
 	int nid;
@@ -367,7 +369,9 @@ static inline int memory_probe_init(void)
 
 /* Soft offline a page */
 static ssize_t
-store_soft_offline_page(struct class *class, const char *buf, size_t count)
+store_soft_offline_page(struct class *class,
+			struct class_attribute *attr,
+			const char *buf, size_t count)
 {
 	int ret;
 	u64 pfn;
@@ -384,7 +388,9 @@ store_soft_offline_page(struct class *class, const char *buf, size_t count)
 
 /* Forcibly offline a page, including killing processes. */
 static ssize_t
-store_hard_offline_page(struct class *class, const char *buf, size_t count)
+store_hard_offline_page(struct class *class,
+			struct class_attribute *attr,
+			const char *buf, size_t count)
 {
 	int ret;
 	u64 pfn;
@@ -423,12 +429,16 @@ static inline int memory_fail_init(void)
  * differentiation between which *physical* devices each
  * section belongs to...
  */
+int __weak arch_get_memory_phys_device(unsigned long start_pfn)
+{
+	return 0;
+}
 
 static int add_memory_block(int nid, struct mem_section *section,
-			unsigned long state, int phys_device,
-			enum mem_add_context context)
+			unsigned long state, enum mem_add_context context)
 {
 	struct memory_block *mem = kzalloc(sizeof(*mem), GFP_KERNEL);
+	unsigned long start_pfn;
 	int ret = 0;
 
 	if (!mem)
@@ -437,7 +447,8 @@ static int add_memory_block(int nid, struct mem_section *section,
 	mem->phys_index = __section_nr(section);
 	mem->state = state;
 	mutex_init(&mem->state_mutex);
-	mem->phys_device = phys_device;
+	start_pfn = section_nr_to_pfn(mem->phys_index);
+	mem->phys_device = arch_get_memory_phys_device(start_pfn);
 
 	ret = register_memory(mem, section);
 	if (!ret)
@@ -509,7 +520,7 @@ int remove_memory_block(unsigned long node_id, struct mem_section *section,
  */
 int register_new_memory(int nid, struct mem_section *section)
 {
-	return add_memory_block(nid, section, MEM_OFFLINE, 0, HOTPLUG);
+	return add_memory_block(nid, section, MEM_OFFLINE, HOTPLUG);
 }
 
 int unregister_memory_section(struct mem_section *section)
@@ -542,7 +553,7 @@ int __init memory_dev_init(void)
 		if (!present_section_nr(i))
 			continue;
 		err = add_memory_block(0, __nr_to_section(i), MEM_ONLINE,
-					0, BOOT);
+				       BOOT);
 		if (!ret)
 			ret = err;
 	}
diff --git a/drivers/base/node.c b/drivers/base/node.c
index 70122791683d..93b3ac65c2d4 100644
--- a/drivers/base/node.c
+++ b/drivers/base/node.c
@@ -16,8 +16,11 @@
 #include <linux/device.h>
 #include <linux/swap.h>
 
+static struct sysdev_class_attribute *node_state_attrs[];
+
 static struct sysdev_class node_class = {
 	.name = "node",
+	.attrs = node_state_attrs,
 };
 
 
@@ -162,8 +165,11 @@ static ssize_t node_read_distance(struct sys_device * dev,
 	int len = 0;
 	int i;
 
-	/* buf currently PAGE_SIZE, need ~4 chars per node */
-	BUILD_BUG_ON(MAX_NUMNODES*4 > PAGE_SIZE/2);
+	/*
+	 * buf is currently PAGE_SIZE in length and each node needs 4 chars
+	 * at the most (distance + space or newline).
+	 */
+	BUILD_BUG_ON(MAX_NUMNODES * 4 > PAGE_SIZE);
 
 	for_each_online_node(i)
 		len += sprintf(buf + len, "%s%d", i ? " " : "", node_distance(nid, i));
@@ -544,76 +550,52 @@ static ssize_t print_nodes_state(enum node_states state, char *buf)
 	return n;
 }
 
-static ssize_t print_nodes_possible(struct sysdev_class *class, char *buf)
-{
-	return print_nodes_state(N_POSSIBLE, buf);
-}
-
-static ssize_t print_nodes_online(struct sysdev_class *class, char *buf)
-{
-	return print_nodes_state(N_ONLINE, buf);
-}
-
-static ssize_t print_nodes_has_normal_memory(struct sysdev_class *class,
-						char *buf)
-{
-	return print_nodes_state(N_NORMAL_MEMORY, buf);
-}
+struct node_attr {
+	struct sysdev_class_attribute attr;
+	enum node_states state;
+};
 
-static ssize_t print_nodes_has_cpu(struct sysdev_class *class, char *buf)
+static ssize_t show_node_state(struct sysdev_class *class,
+			       struct sysdev_class_attribute *attr, char *buf)
 {
-	return print_nodes_state(N_CPU, buf);
+	struct node_attr *na = container_of(attr, struct node_attr, attr);
+	return print_nodes_state(na->state, buf);
 }
 
-static SYSDEV_CLASS_ATTR(possible, 0444, print_nodes_possible, NULL);
-static SYSDEV_CLASS_ATTR(online, 0444, print_nodes_online, NULL);
-static SYSDEV_CLASS_ATTR(has_normal_memory, 0444, print_nodes_has_normal_memory,
-									NULL);
-static SYSDEV_CLASS_ATTR(has_cpu, 0444, print_nodes_has_cpu, NULL);
+#define _NODE_ATTR(name, state) \
+	{ _SYSDEV_CLASS_ATTR(name, 0444, show_node_state, NULL), state }
 
+static struct node_attr node_state_attr[] = {
+	_NODE_ATTR(possible, N_POSSIBLE),
+	_NODE_ATTR(online, N_ONLINE),
+	_NODE_ATTR(has_normal_memory, N_NORMAL_MEMORY),
+	_NODE_ATTR(has_cpu, N_CPU),
 #ifdef CONFIG_HIGHMEM
-static ssize_t print_nodes_has_high_memory(struct sysdev_class *class,
-						 char *buf)
-{
-	return print_nodes_state(N_HIGH_MEMORY, buf);
-}
-
-static SYSDEV_CLASS_ATTR(has_high_memory, 0444, print_nodes_has_high_memory,
-									 NULL);
+	_NODE_ATTR(has_high_memory, N_HIGH_MEMORY),
 #endif
+};
 
-struct sysdev_class_attribute *node_state_attr[] = {
-	&attr_possible,
-	&attr_online,
-	&attr_has_normal_memory,
+static struct sysdev_class_attribute *node_state_attrs[] = {
+	&node_state_attr[0].attr,
+	&node_state_attr[1].attr,
+	&node_state_attr[2].attr,
+	&node_state_attr[3].attr,
 #ifdef CONFIG_HIGHMEM
-	&attr_has_high_memory,
+	&node_state_attr[4].attr,
 #endif
-	&attr_has_cpu,
+	NULL
 };
 
-static int node_states_init(void)
-{
-	int i;
-	int err = 0;
-
-	for (i = 0;  i < NR_NODE_STATES; i++) {
-		int ret;
-		ret = sysdev_class_create_file(&node_class, node_state_attr[i]);
-		if (!err)
-			err = ret;
-	}
-	return err;
-}
-
 #define NODE_CALLBACK_PRI	2	/* lower than SLAB */
 static int __init register_node_type(void)
 {
 	int ret;
 
+ 	BUILD_BUG_ON(ARRAY_SIZE(node_state_attr) != NR_NODE_STATES);
+ 	BUILD_BUG_ON(ARRAY_SIZE(node_state_attrs)-1 != NR_NODE_STATES);
+
 	ret = sysdev_class_register(&node_class);
 	if (!ret) {
-		ret = node_states_init();
 		hotplug_memory_notifier(node_memory_callback,
 					NODE_CALLBACK_PRI);
 	}
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index 58efaf2f1259..4b4b565c835f 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -128,7 +128,7 @@ struct platform_object {
 };
 
 /**
- * platform_device_put
+ * platform_device_put - destroy a platform device
  * @pdev: platform device to free
  *
  * Free all memory associated with a platform device.  This function must
@@ -152,7 +152,7 @@ static void platform_device_release(struct device *dev)
 }
 
 /**
- * platform_device_alloc
+ * platform_device_alloc - create a platform device
  * @name: base name of the device we're adding
  * @id: instance id
  *
@@ -177,7 +177,7 @@ struct platform_device *platform_device_alloc(const char *name, int id)
 EXPORT_SYMBOL_GPL(platform_device_alloc);
 
 /**
- * platform_device_add_resources
+ * platform_device_add_resources - add resources to a platform device
  * @pdev: platform device allocated by platform_device_alloc to add resources to
  * @res: set of resources that needs to be allocated for the device
  * @num: number of resources
@@ -202,7 +202,7 @@ int platform_device_add_resources(struct platform_device *pdev,
 EXPORT_SYMBOL_GPL(platform_device_add_resources);
 
 /**
- * platform_device_add_data
+ * platform_device_add_data - add platform-specific data to a platform device
  * @pdev: platform device allocated by platform_device_alloc to add resources to
  * @data: platform specific data for this platform device
  * @size: size of platform specific data
@@ -344,7 +344,7 @@ void platform_device_unregister(struct platform_device *pdev)
 EXPORT_SYMBOL_GPL(platform_device_unregister);
 
 /**
- * platform_device_register_simple
+ * platform_device_register_simple - add a platform-level device and its resources
  * @name: base name of the device we're adding
  * @id: instance id
  * @res: set of resources that needs to be allocated for the device
@@ -362,6 +362,8 @@ EXPORT_SYMBOL_GPL(platform_device_unregister);
  * enumeration tasks, they don't fully conform to the Linux driver model.
  * In particular, when such drivers are built as modules, they can't be
  * "hotplugged".
+ *
+ * Returns &struct platform_device pointer on success, or ERR_PTR() on error.
  */
 struct platform_device *platform_device_register_simple(const char *name,
 							int id,
@@ -396,7 +398,7 @@ error:
 EXPORT_SYMBOL_GPL(platform_device_register_simple);
 
 /**
- * platform_device_register_data
+ * platform_device_register_data - add a platform-level device with platform-specific data
  * @parent: parent device for the device we're adding
  * @name: base name of the device we're adding
  * @id: instance id
@@ -408,6 +410,8 @@ EXPORT_SYMBOL_GPL(platform_device_register_simple);
  * allocated for the device allows drivers using such devices to be
  * unloaded without waiting for the last reference to the device to be
  * dropped.
+ *
+ * Returns &struct platform_device pointer on success, or ERR_PTR() on error.
  */
 struct platform_device *platform_device_register_data(
 		struct device *parent,
@@ -473,7 +477,7 @@ static void platform_drv_shutdown(struct device *_dev)
 }
 
 /**
- * platform_driver_register
+ * platform_driver_register - register a driver for platform-level devices
  * @drv: platform driver structure
  */
 int platform_driver_register(struct platform_driver *drv)
@@ -491,7 +495,7 @@ int platform_driver_register(struct platform_driver *drv)
 EXPORT_SYMBOL_GPL(platform_driver_register);
 
 /**
- * platform_driver_unregister
+ * platform_driver_unregister - unregister a driver for platform-level devices
  * @drv: platform driver structure
  */
 void platform_driver_unregister(struct platform_driver *drv)
@@ -548,6 +552,66 @@ int __init_or_module platform_driver_probe(struct platform_driver *drv,
 }
 EXPORT_SYMBOL_GPL(platform_driver_probe);
 
+/**
+ * platform_create_bundle - register driver and create corresponding device
+ * @driver: platform driver structure
+ * @probe: the driver probe routine, probably from an __init section
+ * @res: set of resources that needs to be allocated for the device
+ * @n_res: number of resources
+ * @data: platform specific data for this platform device
+ * @size: size of platform specific data
+ *
+ * Use this in legacy-style modules that probe hardware directly and
+ * register a single platform device and corresponding platform driver.
+ *
+ * Returns &struct platform_device pointer on success, or ERR_PTR() on error.
+ */
+struct platform_device * __init_or_module platform_create_bundle(
+			struct platform_driver *driver,
+			int (*probe)(struct platform_device *),
+			struct resource *res, unsigned int n_res,
+			const void *data, size_t size)
+{
+	struct platform_device *pdev;
+	int error;
+
+	pdev = platform_device_alloc(driver->driver.name, -1);
+	if (!pdev) {
+		error = -ENOMEM;
+		goto err_out;
+	}
+
+	if (res) {
+		error = platform_device_add_resources(pdev, res, n_res);
+		if (error)
+			goto err_pdev_put;
+	}
+
+	if (data) {
+		error = platform_device_add_data(pdev, data, size);
+		if (error)
+			goto err_pdev_put;
+	}
+
+	error = platform_device_add(pdev);
+	if (error)
+		goto err_pdev_put;
+
+	error = platform_driver_probe(driver, probe);
+	if (error)
+		goto err_pdev_del;
+
+	return pdev;
+
+err_pdev_del:
+	platform_device_del(pdev);
+err_pdev_put:
+	platform_device_put(pdev);
+err_out:
+	return ERR_PTR(error);
+}
+EXPORT_SYMBOL_GPL(platform_create_bundle);
+
 /* modalias support enables more hands-off userspace setup:
  * (a) environment variable lets new-style hotplug events work once system is
  *     fully running:  "modprobe $MODALIAS"
@@ -578,7 +642,7 @@ static int platform_uevent(struct device *dev, struct kobj_uevent_env *env)
 }
 
 static const struct platform_device_id *platform_match_id(
-			struct platform_device_id *id,
+			const struct platform_device_id *id,
 			struct platform_device *pdev)
 {
 	while (id->name[0]) {
@@ -994,9 +1058,11 @@ static __initdata LIST_HEAD(early_platform_driver_list);
 static __initdata LIST_HEAD(early_platform_device_list);
 
 /**
- * early_platform_driver_register
+ * early_platform_driver_register - register early platform driver
  * @epdrv: early_platform driver structure
  * @buf: string passed from early_param()
+ *
+ * Helper function for early_platform_init() / early_platform_init_buffer()
  */
 int __init early_platform_driver_register(struct early_platform_driver *epdrv,
 					  char *buf)
@@ -1048,9 +1114,12 @@ int __init early_platform_driver_register(struct early_platform_driver *epdrv,
 }
 
 /**
- * early_platform_add_devices - add a numbers of early platform devices
+ * early_platform_add_devices - adds a number of early platform devices
  * @devs: array of early platform devices to add
  * @num: number of early platform devices in array
+ *
+ * Used by early architecture code to register early platform devices and
+ * their platform data.
  */
 void __init early_platform_add_devices(struct platform_device **devs, int num)
 {
@@ -1070,8 +1139,12 @@ void __init early_platform_add_devices(struct platform_device **devs, int num)
 }
 
 /**
- * early_platform_driver_register_all
+ * early_platform_driver_register_all - register early platform drivers
  * @class_str: string to identify early platform driver class
+ *
+ * Used by architecture code to register all early platform drivers
+ * for a certain class. If omitted then only early platform drivers
+ * with matching kernel command line class parameters will be registered.
  */
 void __init early_platform_driver_register_all(char *class_str)
 {
@@ -1093,7 +1166,7 @@ void __init early_platform_driver_register_all(char *class_str)
 }
 
 /**
- * early_platform_match
+ * early_platform_match - find early platform device matching driver
  * @epdrv: early platform driver structure
  * @id: id to match against
  */
@@ -1111,7 +1184,7 @@ early_platform_match(struct early_platform_driver *epdrv, int id)
 }
 
 /**
- * early_platform_left
+ * early_platform_left - check if early platform driver has matching devices
  * @epdrv: early platform driver structure
  * @id: return true if id or above exists
  */
@@ -1129,7 +1202,7 @@ static  __init int early_platform_left(struct early_platform_driver *epdrv,
 }
 
 /**
- * early_platform_driver_probe_id
+ * early_platform_driver_probe_id - probe drivers matching class_str and id
  * @class_str: string to identify early platform driver class
  * @id: id to match against
  * @nr_probe: number of platform devices to successfully probe before exiting
@@ -1199,10 +1272,14 @@ static int __init early_platform_driver_probe_id(char *class_str,
 }
 
 /**
- * early_platform_driver_probe
+ * early_platform_driver_probe - probe a class of registered drivers
  * @class_str: string to identify early platform driver class
  * @nr_probe: number of platform devices to successfully probe before exiting
  * @user_only: only probe user specified early platform devices
+ *
+ * Used by architecture code to probe registered early platform drivers
+ * within a certain class. For probe to happen a registered early platform
+ * device matching a registered early platform driver is needed.
  */
 int __init early_platform_driver_probe(char *class_str,
 				       int nr_probe,
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index 0e26a6f6fd48..d477f4dc5e51 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -35,8 +35,8 @@
  * because children are guaranteed to be discovered after parents, and
  * are inserted at the back of the list on discovery.
  *
- * Since device_pm_add() may be called with a device semaphore held,
- * we must never try to acquire a device semaphore while holding
+ * Since device_pm_add() may be called with a device lock held,
+ * we must never try to acquire a device lock while holding
  * dpm_list_mutex.
  */
 
@@ -508,7 +508,7 @@ static int device_resume(struct device *dev, pm_message_t state, bool async)
 	TRACE_RESUME(0);
 
 	dpm_wait(dev->parent, async);
-	down(&dev->sem);
+	device_lock(dev);
 
 	dev->power.status = DPM_RESUMING;
 
@@ -543,7 +543,7 @@ static int device_resume(struct device *dev, pm_message_t state, bool async)
 		}
 	}
  End:
-	up(&dev->sem);
+	device_unlock(dev);
 	complete_all(&dev->power.completion);
 
 	TRACE_RESUME(error);
@@ -629,7 +629,7 @@ static void dpm_resume(pm_message_t state)
  */
 static void device_complete(struct device *dev, pm_message_t state)
 {
-	down(&dev->sem);
+	device_lock(dev);
 
 	if (dev->class && dev->class->pm && dev->class->pm->complete) {
 		pm_dev_dbg(dev, state, "completing class ");
@@ -646,7 +646,7 @@ static void device_complete(struct device *dev, pm_message_t state)
 		dev->bus->pm->complete(dev);
 	}
 
-	up(&dev->sem);
+	device_unlock(dev);
 }
 
 /**
@@ -809,7 +809,7 @@ static int __device_suspend(struct device *dev, pm_message_t state, bool async)
 	int error = 0;
 
 	dpm_wait_for_children(dev, async);
-	down(&dev->sem);
+	device_lock(dev);
 
 	if (async_error)
 		goto End;
@@ -849,7 +849,7 @@ static int __device_suspend(struct device *dev, pm_message_t state, bool async)
 		dev->power.status = DPM_OFF;
 
  End:
-	up(&dev->sem);
+	device_unlock(dev);
 	complete_all(&dev->power.completion);
 
 	return error;
@@ -938,7 +938,7 @@ static int device_prepare(struct device *dev, pm_message_t state)
 {
 	int error = 0;
 
-	down(&dev->sem);
+	device_lock(dev);
 
 	if (dev->bus && dev->bus->pm && dev->bus->pm->prepare) {
 		pm_dev_dbg(dev, state, "preparing ");
@@ -962,7 +962,7 @@ static int device_prepare(struct device *dev, pm_message_t state)
 		suspend_report_result(dev->class->pm->prepare, error);
 	}
  End:
-	up(&dev->sem);
+	device_unlock(dev);
 
 	return error;
 }
diff --git a/drivers/base/sys.c b/drivers/base/sys.c
index 0d903909af7e..8980feec5d14 100644
--- a/drivers/base/sys.c
+++ b/drivers/base/sys.c
@@ -54,7 +54,7 @@ sysdev_store(struct kobject *kobj, struct attribute *attr,
 	return -EIO;
 }
 
-static struct sysfs_ops sysfs_ops = {
+static const struct sysfs_ops sysfs_ops = {
 	.show	= sysdev_show,
 	.store	= sysdev_store,
 };
@@ -89,7 +89,7 @@ static ssize_t sysdev_class_show(struct kobject *kobj, struct attribute *attr,
 	struct sysdev_class_attribute *class_attr = to_sysdev_class_attr(attr);
 
 	if (class_attr->show)
-		return class_attr->show(class, buffer);
+		return class_attr->show(class, class_attr, buffer);
 	return -EIO;
 }
 
@@ -100,11 +100,11 @@ static ssize_t sysdev_class_store(struct kobject *kobj, struct attribute *attr,
 	struct sysdev_class_attribute *class_attr = to_sysdev_class_attr(attr);
 
 	if (class_attr->store)
-		return class_attr->store(class, buffer, count);
+		return class_attr->store(class, class_attr, buffer, count);
 	return -EIO;
 }
 
-static struct sysfs_ops sysfs_class_ops = {
+static const struct sysfs_ops sysfs_class_ops = {
 	.show	= sysdev_class_show,
 	.store	= sysdev_class_store,
 };
@@ -145,13 +145,20 @@ int sysdev_class_register(struct sysdev_class *cls)
 	if (retval)
 		return retval;
 
-	return kset_register(&cls->kset);
+	retval = kset_register(&cls->kset);
+	if (!retval && cls->attrs)
+		retval = sysfs_create_files(&cls->kset.kobj,
+					    (const struct attribute **)cls->attrs);
+	return retval;
 }
 
 void sysdev_class_unregister(struct sysdev_class *cls)
 {
 	pr_debug("Unregistering sysdev class '%s'\n",
 		 kobject_name(&cls->kset.kobj));
+	if (cls->attrs)
+		sysfs_remove_files(&cls->kset.kobj,
+				   (const struct attribute **)cls->attrs);
 	kset_unregister(&cls->kset);
 }
 
diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h
index 2bf3a6ef3684..d9301e861d9f 100644
--- a/drivers/block/drbd/drbd_int.h
+++ b/drivers/block/drbd/drbd_int.h
@@ -95,7 +95,7 @@ extern char usermode_helper[];
 
 /* All EEs on the free list should have ID_VACANT (== 0)
  * freshly allocated EEs get !ID_VACANT (== 1)
- * so if it says "cannot dereference null pointer at adress 0x00000001",
+ * so if it says "cannot dereference null pointer at address 0x00000001",
  * it is most likely one of these :( */
 
 #define ID_IN_SYNC      (4711ULL)
@@ -1171,7 +1171,7 @@ extern int drbd_bitmap_io(struct drbd_conf *mdev, int (*io_fn)(struct drbd_conf
 /* Meta data layout
    We reserve a 128MB Block (4k aligned)
    * either at the end of the backing device
-   * or on a seperate meta data device. */
+   * or on a separate meta data device. */
 
 #define MD_RESERVED_SECT (128LU << 11)  /* 128 MB, unit sectors */
 /* The following numbers are sectors */
diff --git a/drivers/block/drbd/drbd_req.h b/drivers/block/drbd/drbd_req.h
index f22c1bc8ec7e..16119d7056cc 100644
--- a/drivers/block/drbd/drbd_req.h
+++ b/drivers/block/drbd/drbd_req.h
@@ -57,7 +57,7 @@
  *
  *  It may me handed over to the local disk subsystem.
  *  It may be completed by the local disk subsystem,
- *    either sucessfully or with io-error.
+ *    either successfully or with io-error.
  *  In case it is a READ request, and it failed locally,
  *    it may be retried remotely.
  *
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index b9b117059b62..90c4038702da 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -144,13 +144,23 @@
  * Better audit of register_blkdev.
  */
 
-#define FLOPPY_SANITY_CHECK
 #undef  FLOPPY_SILENT_DCL_CLEAR
 
 #define REALLY_SLOW_IO
 
 #define DEBUGT 2
-#define DCL_DEBUG	/* debug disk change line */
+
+#define DPRINT(format, args...) \
+	pr_info("floppy%d: " format, current_drive, ##args)
+
+#define DCL_DEBUG		/* debug disk change line */
+#ifdef DCL_DEBUG
+#define debug_dcl(test, fmt, args...) \
+	do { if ((test) & FD_DEBUG) DPRINT(fmt, ##args); } while (0)
+#else
+#define debug_dcl(test, fmt, args...) \
+	do { if (0) DPRINT(fmt, ##args); } while (0)
+#endif
 
 /* do print messages for unexpected interrupts */
 static int print_unex = 1;
@@ -180,6 +190,8 @@ static int print_unex = 1;
 #include <linux/mod_devicetable.h>
 #include <linux/buffer_head.h>	/* for invalidate_buffers() */
 #include <linux/mutex.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 
 /*
  * PS/2 floppies have much slower step rates than regular floppies.
@@ -191,8 +203,6 @@ static int slow_floppy;
 #include <asm/dma.h>
 #include <asm/irq.h>
 #include <asm/system.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
 
 static int FLOPPY_IRQ = 6;
 static int FLOPPY_DMA = 2;
@@ -241,8 +251,6 @@ static int allowed_drive_mask = 0x33;
 
 static int irqdma_allocated;
 
-#define DEVICE_NAME "floppy"
-
 #include <linux/blkdev.h>
 #include <linux/blkpg.h>
 #include <linux/cdrom.h>	/* for the compatibility eject ioctl */
@@ -250,7 +258,7 @@ static int irqdma_allocated;
 
 static struct request *current_req;
 static struct request_queue *floppy_queue;
-static void do_fd_request(struct request_queue * q);
+static void do_fd_request(struct request_queue *q);
 
 #ifndef fd_get_dma_residue
 #define fd_get_dma_residue() get_dma_residue(FLOPPY_DMA)
@@ -263,7 +271,7 @@ static void do_fd_request(struct request_queue * q);
 #endif
 
 #ifndef fd_dma_mem_alloc
-#define fd_dma_mem_alloc(size) __get_dma_pages(GFP_KERNEL,get_order(size))
+#define fd_dma_mem_alloc(size) __get_dma_pages(GFP_KERNEL, get_order(size))
 #endif
 
 static inline void fallback_on_nodma_alloc(char **addr, size_t l)
@@ -273,7 +281,7 @@ static inline void fallback_on_nodma_alloc(char **addr, size_t l)
 		return;		/* we have the memory */
 	if (can_use_virtual_dma != 2)
 		return;		/* no fallback allowed */
-	printk("DMA memory shortage. Temporarily falling back on virtual DMA\n");
+	pr_info("DMA memory shortage. Temporarily falling back on virtual DMA\n");
 	*addr = (char *)nodma_mem_alloc(l);
 #else
 	return;
@@ -283,59 +291,50 @@ static inline void fallback_on_nodma_alloc(char **addr, size_t l)
 /* End dma memory related stuff */
 
 static unsigned long fake_change;
-static int initialising = 1;
+static bool initialized;
 
-#define ITYPE(x) (((x)>>2) & 0x1f)
-#define TOMINOR(x) ((x & 3) | ((x & 4) << 5))
-#define UNIT(x) ((x) & 0x03)	/* drive on fdc */
-#define FDC(x) (((x) & 0x04) >> 2)	/* fdc of drive */
+#define ITYPE(x)	(((x) >> 2) & 0x1f)
+#define TOMINOR(x)	((x & 3) | ((x & 4) << 5))
+#define UNIT(x)		((x) & 0x03)		/* drive on fdc */
+#define FDC(x)		(((x) & 0x04) >> 2)	/* fdc of drive */
 	/* reverse mapping from unit and fdc to drive */
 #define REVDRIVE(fdc, unit) ((unit) + ((fdc) << 2))
-#define DP (&drive_params[current_drive])
-#define DRS (&drive_state[current_drive])
-#define DRWE (&write_errors[current_drive])
-#define FDCS (&fdc_state[fdc])
-#define CLEARF(x) clear_bit(x##_BIT, &DRS->flags)
-#define SETF(x) set_bit(x##_BIT, &DRS->flags)
-#define TESTF(x) test_bit(x##_BIT, &DRS->flags)
 
-#define UDP (&drive_params[drive])
-#define UDRS (&drive_state[drive])
-#define UDRWE (&write_errors[drive])
-#define UFDCS (&fdc_state[FDC(drive)])
-#define UCLEARF(x) clear_bit(x##_BIT, &UDRS->flags)
-#define USETF(x) set_bit(x##_BIT, &UDRS->flags)
-#define UTESTF(x) test_bit(x##_BIT, &UDRS->flags)
+#define DP	(&drive_params[current_drive])
+#define DRS	(&drive_state[current_drive])
+#define DRWE	(&write_errors[current_drive])
+#define FDCS	(&fdc_state[fdc])
 
-#define DPRINT(format, args...) printk(DEVICE_NAME "%d: " format, current_drive , ## args)
+#define UDP	(&drive_params[drive])
+#define UDRS	(&drive_state[drive])
+#define UDRWE	(&write_errors[drive])
+#define UFDCS	(&fdc_state[FDC(drive)])
 
-#define PH_HEAD(floppy,head) (((((floppy)->stretch & 2) >>1) ^ head) << 2)
-#define STRETCH(floppy) ((floppy)->stretch & FD_STRETCH)
-
-#define CLEARSTRUCT(x) memset((x), 0, sizeof(*(x)))
+#define PH_HEAD(floppy, head) (((((floppy)->stretch & 2) >> 1) ^ head) << 2)
+#define STRETCH(floppy)	((floppy)->stretch & FD_STRETCH)
 
 /* read/write */
-#define COMMAND raw_cmd->cmd[0]
-#define DR_SELECT raw_cmd->cmd[1]
-#define TRACK raw_cmd->cmd[2]
-#define HEAD raw_cmd->cmd[3]
-#define SECTOR raw_cmd->cmd[4]
-#define SIZECODE raw_cmd->cmd[5]
-#define SECT_PER_TRACK raw_cmd->cmd[6]
-#define GAP raw_cmd->cmd[7]
-#define SIZECODE2 raw_cmd->cmd[8]
+#define COMMAND		(raw_cmd->cmd[0])
+#define DR_SELECT	(raw_cmd->cmd[1])
+#define TRACK		(raw_cmd->cmd[2])
+#define HEAD		(raw_cmd->cmd[3])
+#define SECTOR		(raw_cmd->cmd[4])
+#define SIZECODE	(raw_cmd->cmd[5])
+#define SECT_PER_TRACK	(raw_cmd->cmd[6])
+#define GAP		(raw_cmd->cmd[7])
+#define SIZECODE2	(raw_cmd->cmd[8])
 #define NR_RW 9
 
 /* format */
-#define F_SIZECODE raw_cmd->cmd[2]
-#define F_SECT_PER_TRACK raw_cmd->cmd[3]
-#define F_GAP raw_cmd->cmd[4]
-#define F_FILL raw_cmd->cmd[5]
+#define F_SIZECODE	(raw_cmd->cmd[2])
+#define F_SECT_PER_TRACK (raw_cmd->cmd[3])
+#define F_GAP		(raw_cmd->cmd[4])
+#define F_FILL		(raw_cmd->cmd[5])
 #define NR_F 6
 
 /*
- * Maximum disk size (in kilobytes). This default is used whenever the
- * current disk size is unknown.
+ * Maximum disk size (in kilobytes).
+ * This default is used whenever the current disk size is unknown.
  * [Now it is rather a minimum]
  */
 #define MAX_DISK_SIZE 4		/* 3984 */
@@ -345,16 +344,17 @@ static int initialising = 1;
  */
 #define MAX_REPLIES 16
 static unsigned char reply_buffer[MAX_REPLIES];
-static int inr;			/* size of reply buffer, when called from interrupt */
-#define ST0 (reply_buffer[0])
-#define ST1 (reply_buffer[1])
-#define ST2 (reply_buffer[2])
-#define ST3 (reply_buffer[0])	/* result of GETSTATUS */
-#define R_TRACK (reply_buffer[3])
-#define R_HEAD (reply_buffer[4])
-#define R_SECTOR (reply_buffer[5])
-#define R_SIZECODE (reply_buffer[6])
-#define SEL_DLY (2*HZ/100)
+static int inr;		/* size of reply buffer, when called from interrupt */
+#define ST0		(reply_buffer[0])
+#define ST1		(reply_buffer[1])
+#define ST2		(reply_buffer[2])
+#define ST3		(reply_buffer[0])	/* result of GETSTATUS */
+#define R_TRACK		(reply_buffer[3])
+#define R_HEAD		(reply_buffer[4])
+#define R_SECTOR	(reply_buffer[5])
+#define R_SIZECODE	(reply_buffer[6])
+
+#define SEL_DLY		(2 * HZ / 100)
 
 /*
  * this struct defines the different floppy drive types.
@@ -505,9 +505,9 @@ static char floppy_device_name[] = "floppy";
 static int probing;
 
 /* Synchronization of FDC access. */
-#define FD_COMMAND_NONE -1
-#define FD_COMMAND_ERROR 2
-#define FD_COMMAND_OKAY 3
+#define FD_COMMAND_NONE		-1
+#define FD_COMMAND_ERROR	2
+#define FD_COMMAND_OKAY		3
 
 static volatile int command_status = FD_COMMAND_NONE;
 static unsigned long fdc_busy;
@@ -515,11 +515,6 @@ static DECLARE_WAIT_QUEUE_HEAD(fdc_wait);
 static DECLARE_WAIT_QUEUE_HEAD(command_done);
 
 #define NO_SIGNAL (!interruptible || !signal_pending(current))
-#define CALL(x) if ((x) == -EINTR) return -EINTR
-#define ECALL(x) if ((ret = (x))) return ret;
-#define _WAIT(x,i) CALL(ret=wait_til_done((x),i))
-#define WAIT(x) _WAIT((x),interruptible)
-#define IWAIT(x) _WAIT((x),1)
 
 /* Errors during formatting are counted here. */
 static int format_errors;
@@ -545,8 +540,9 @@ static int max_buffer_sectors;
 static int *errors;
 typedef void (*done_f)(int);
 static struct cont_t {
-	void (*interrupt)(void);	/* this is called after the interrupt of the
-					 * main command */
+	void (*interrupt)(void);
+				/* this is called after the interrupt of the
+				 * main command */
 	void (*redo)(void);	/* this is called to retry the operation */
 	void (*error)(void);	/* this is called to tally an error */
 	done_f done;		/* this is called to say if the operation has
@@ -571,7 +567,6 @@ static void floppy_release_irq_and_dma(void);
  * reset doesn't need to be tested before sending commands, because
  * output_byte is automatically disabled when reset is set.
  */
-#define CHECK_RESET { if (FDCS->reset){ reset_fdc(); return; } }
 static void reset_fdc(void);
 
 /*
@@ -579,9 +574,9 @@ static void reset_fdc(void);
  * information to interrupts. They are the data used for the current
  * request.
  */
-#define NO_TRACK -1
-#define NEED_1_RECAL -2
-#define NEED_2_RECAL -3
+#define NO_TRACK	-1
+#define NEED_1_RECAL	-2
+#define NEED_2_RECAL	-3
 
 static int usage_count;
 
@@ -621,39 +616,35 @@ static inline void set_debugt(void)
 	debugtimer = jiffies;
 }
 
-static inline void debugt(const char *message)
+static inline void debugt(const char *func, const char *msg)
 {
 	if (DP->flags & DEBUGT)
-		printk("%s dtime=%lu\n", message, jiffies - debugtimer);
+		pr_info("%s:%s dtime=%lu\n", func, msg, jiffies - debugtimer);
 }
 #else
 static inline void set_debugt(void) { }
-static inline void debugt(const char *message) { }
+static inline void debugt(const char *func, const char *msg) { }
 #endif /* DEBUGT */
 
-typedef void (*timeout_fn) (unsigned long);
+typedef void (*timeout_fn)(unsigned long);
 static DEFINE_TIMER(fd_timeout, floppy_shutdown, 0, 0);
 
 static const char *timeout_message;
 
-#ifdef FLOPPY_SANITY_CHECK
-static void is_alive(const char *message)
+static void is_alive(const char *func, const char *message)
 {
 	/* this routine checks whether the floppy driver is "alive" */
-	if (test_bit(0, &fdc_busy) && command_status < 2
-	    && !timer_pending(&fd_timeout)) {
-		DPRINT("timeout handler died: %s\n", message);
+	if (test_bit(0, &fdc_busy) && command_status < 2 &&
+	    !timer_pending(&fd_timeout)) {
+		DPRINT("%s: timeout handler died.  %s\n", func, message);
 	}
 }
-#endif
 
-static void (*do_floppy) (void) = NULL;
-
-#ifdef FLOPPY_SANITY_CHECK
+static void (*do_floppy)(void) = NULL;
 
 #define OLOGSIZE 20
 
-static void (*lasthandler) (void);
+static void (*lasthandler)(void);
 static unsigned long interruptjiffies;
 static unsigned long resultjiffies;
 static int resultsize;
@@ -666,12 +657,11 @@ static struct output_log {
 } output_log[OLOGSIZE];
 
 static int output_log_pos;
-#endif
 
 #define current_reqD -1
 #define MAXTIMEOUT -2
 
-static void __reschedule_timeout(int drive, const char *message, int marg)
+static void __reschedule_timeout(int drive, const char *message)
 {
 	if (drive == current_reqD)
 		drive = current_drive;
@@ -682,25 +672,22 @@ static void __reschedule_timeout(int drive, const char *message, int marg)
 	} else
 		fd_timeout.expires = jiffies + UDP->timeout;
 	add_timer(&fd_timeout);
-	if (UDP->flags & FD_DEBUG) {
-		DPRINT("reschedule timeout ");
-		printk(message, marg);
-		printk("\n");
-	}
+	if (UDP->flags & FD_DEBUG)
+		DPRINT("reschedule timeout %s\n", message);
 	timeout_message = message;
 }
 
-static void reschedule_timeout(int drive, const char *message, int marg)
+static void reschedule_timeout(int drive, const char *message)
 {
 	unsigned long flags;
 
 	spin_lock_irqsave(&floppy_lock, flags);
-	__reschedule_timeout(drive, message, marg);
+	__reschedule_timeout(drive, message);
 	spin_unlock_irqrestore(&floppy_lock, flags);
 }
 
-#define INFBOUND(a,b) (a)=max_t(int, a, b)
-#define SUPBOUND(a,b) (a)=min_t(int, a, b)
+#define INFBOUND(a, b) (a) = max_t(int, a, b)
+#define SUPBOUND(a, b) (a) = min_t(int, a, b)
 
 /*
  * Bottom half floppy driver.
@@ -739,7 +726,6 @@ static int disk_change(int drive)
 {
 	int fdc = FDC(drive);
 
-#ifdef FLOPPY_SANITY_CHECK
 	if (time_before(jiffies, UDRS->select_date + UDP->select_delay))
 		DPRINT("WARNING disk change called early\n");
 	if (!(FDCS->dor & (0x10 << UNIT(drive))) ||
@@ -748,31 +734,27 @@ static int disk_change(int drive)
 		DPRINT("drive=%d fdc=%d dor=%x\n", drive, FDC(drive),
 		       (unsigned int)FDCS->dor);
 	}
-#endif
 
-#ifdef DCL_DEBUG
-	if (UDP->flags & FD_DEBUG) {
-		DPRINT("checking disk change line for drive %d\n", drive);
-		DPRINT("jiffies=%lu\n", jiffies);
-		DPRINT("disk change line=%x\n", fd_inb(FD_DIR) & 0x80);
-		DPRINT("flags=%lx\n", UDRS->flags);
-	}
-#endif
+	debug_dcl(UDP->flags,
+		  "checking disk change line for drive %d\n", drive);
+	debug_dcl(UDP->flags, "jiffies=%lu\n", jiffies);
+	debug_dcl(UDP->flags, "disk change line=%x\n", fd_inb(FD_DIR) & 0x80);
+	debug_dcl(UDP->flags, "flags=%lx\n", UDRS->flags);
+
 	if (UDP->flags & FD_BROKEN_DCL)
-		return UTESTF(FD_DISK_CHANGED);
+		return test_bit(FD_DISK_CHANGED_BIT, &UDRS->flags);
 	if ((fd_inb(FD_DIR) ^ UDP->flags) & 0x80) {
-		USETF(FD_VERIFY);	/* verify write protection */
-		if (UDRS->maxblock) {
-			/* mark it changed */
-			USETF(FD_DISK_CHANGED);
-		}
+		set_bit(FD_VERIFY_BIT, &UDRS->flags);
+					/* verify write protection */
+
+		if (UDRS->maxblock)	/* mark it changed */
+			set_bit(FD_DISK_CHANGED_BIT, &UDRS->flags);
 
 		/* invalidate its geometry */
 		if (UDRS->keep_data >= 0) {
 			if ((UDP->flags & FTD_MSG) &&
 			    current_type[drive] != NULL)
-				DPRINT("Disk type is undefined after "
-				       "disk change\n");
+				DPRINT("Disk type is undefined after disk change\n");
 			current_type[drive] = NULL;
 			floppy_sizes[TOMINOR(drive)] = MAX_DISK_SIZE << 1;
 		}
@@ -780,7 +762,7 @@ static int disk_change(int drive)
 		return 1;
 	} else {
 		UDRS->last_checked = jiffies;
-		UCLEARF(FD_DISK_NEWCHANGE);
+		clear_bit(FD_DISK_NEWCHANGE_BIT, &UDRS->flags);
 	}
 	return 0;
 }
@@ -790,6 +772,12 @@ static inline int is_selected(int dor, int unit)
 	return ((dor & (0x10 << unit)) && (dor & 3) == unit);
 }
 
+static bool is_ready_state(int status)
+{
+	int state = status & (STATUS_READY | STATUS_DIR | STATUS_DMA);
+	return state == STATUS_READY;
+}
+
 static int set_dor(int fdc, char mask, char data)
 {
 	unsigned char unit;
@@ -806,11 +794,8 @@ static int set_dor(int fdc, char mask, char data)
 		unit = olddor & 0x3;
 		if (is_selected(olddor, unit) && !is_selected(newdor, unit)) {
 			drive = REVDRIVE(fdc, unit);
-#ifdef DCL_DEBUG
-			if (UDP->flags & FD_DEBUG) {
-				DPRINT("calling disk change from set_dor\n");
-			}
-#endif
+			debug_dcl(UDP->flags,
+				  "calling disk change from set_dor\n");
 			disk_change(drive);
 		}
 		FDCS->dor = newdor;
@@ -834,8 +819,10 @@ static void twaddle(void)
 	DRS->select_date = jiffies;
 }
 
-/* reset all driver information about the current fdc. This is needed after
- * a reset, and after a raw command. */
+/*
+ * Reset all driver information about the current fdc.
+ * This is needed after a reset, and after a raw command.
+ */
 static void reset_fdc_info(int mode)
 {
 	int drive;
@@ -857,7 +844,7 @@ static void set_fdc(int drive)
 		current_drive = drive;
 	}
 	if (fdc != 1 && fdc != 0) {
-		printk("bad fdc value\n");
+		pr_info("bad fdc value\n");
 		return;
 	}
 	set_dor(fdc, ~0, 8);
@@ -871,11 +858,10 @@ static void set_fdc(int drive)
 }
 
 /* locks the driver */
-static int _lock_fdc(int drive, int interruptible, int line)
+static int _lock_fdc(int drive, bool interruptible, int line)
 {
 	if (!usage_count) {
-		printk(KERN_ERR
-		       "Trying to lock fdc while usage count=0 at line %d\n",
+		pr_err("Trying to lock fdc while usage count=0 at line %d\n",
 		       line);
 		return -1;
 	}
@@ -904,15 +890,13 @@ static int _lock_fdc(int drive, int interruptible, int line)
 	}
 	command_status = FD_COMMAND_NONE;
 
-	__reschedule_timeout(drive, "lock fdc", 0);
+	__reschedule_timeout(drive, "lock fdc");
 	set_fdc(drive);
 	return 0;
 }
 
-#define lock_fdc(drive,interruptible) _lock_fdc(drive,interruptible, __LINE__)
-
-#define LOCK_FDC(drive,interruptible) \
-if (lock_fdc(drive,interruptible)) return -EINTR;
+#define lock_fdc(drive, interruptible)			\
+	_lock_fdc(drive, interruptible, __LINE__)
 
 /* unlocks the driver */
 static inline void unlock_fdc(void)
@@ -924,7 +908,7 @@ static inline void unlock_fdc(void)
 		DPRINT("FDC access conflict!\n");
 
 	if (do_floppy)
-		DPRINT("device interrupt still active at FDC release: %p!\n",
+		DPRINT("device interrupt still active at FDC release: %pf!\n",
 		       do_floppy);
 	command_status = FD_COMMAND_NONE;
 	spin_lock_irqsave(&floppy_lock, flags);
@@ -1003,7 +987,7 @@ static void empty(void)
 
 static DECLARE_WORK(floppy_work, NULL);
 
-static void schedule_bh(void (*handler) (void))
+static void schedule_bh(void (*handler)(void))
 {
 	PREPARE_WORK(&floppy_work, (work_func_t)handler);
 	schedule_work(&floppy_work);
@@ -1026,11 +1010,7 @@ static void cancel_activity(void)
  * transfer */
 static void fd_watchdog(void)
 {
-#ifdef DCL_DEBUG
-	if (DP->flags & FD_DEBUG) {
-		DPRINT("calling disk change from watchdog\n");
-	}
-#endif
+	debug_dcl(DP->flags, "calling disk change from watchdog\n");
 
 	if (disk_change(current_drive)) {
 		DPRINT("disk removed during i/o\n");
@@ -1039,7 +1019,7 @@ static void fd_watchdog(void)
 		reset_fdc();
 	} else {
 		del_timer(&fd_timer);
-		fd_timer.function = (timeout_fn) fd_watchdog;
+		fd_timer.function = (timeout_fn)fd_watchdog;
 		fd_timer.expires = jiffies + HZ / 10;
 		add_timer(&fd_timer);
 	}
@@ -1105,25 +1085,23 @@ static void setup_DMA(void)
 {
 	unsigned long f;
 
-#ifdef FLOPPY_SANITY_CHECK
 	if (raw_cmd->length == 0) {
 		int i;
 
-		printk("zero dma transfer size:");
+		pr_info("zero dma transfer size:");
 		for (i = 0; i < raw_cmd->cmd_count; i++)
-			printk("%x,", raw_cmd->cmd[i]);
-		printk("\n");
+			pr_cont("%x,", raw_cmd->cmd[i]);
+		pr_cont("\n");
 		cont->done(0);
 		FDCS->reset = 1;
 		return;
 	}
 	if (((unsigned long)raw_cmd->kernel_data) % 512) {
-		printk("non aligned address: %p\n", raw_cmd->kernel_data);
+		pr_info("non aligned address: %p\n", raw_cmd->kernel_data);
 		cont->done(0);
 		FDCS->reset = 1;
 		return;
 	}
-#endif
 	f = claim_dma_lock();
 	fd_disable_dma();
 #ifdef fd_dma_setup
@@ -1165,7 +1143,7 @@ static int wait_til_ready(void)
 		if (status & STATUS_READY)
 			return status;
 	}
-	if (!initialising) {
+	if (initialized) {
 		DPRINT("Getstatus times out (%x) on fdc %d\n", status, fdc);
 		show_floppy();
 	}
@@ -1176,22 +1154,21 @@ static int wait_til_ready(void)
 /* sends a command byte to the fdc */
 static int output_byte(char byte)
 {
-	int status;
+	int status = wait_til_ready();
 
-	if ((status = wait_til_ready()) < 0)
+	if (status < 0)
 		return -1;
-	if ((status & (STATUS_READY | STATUS_DIR | STATUS_DMA)) == STATUS_READY) {
+
+	if (is_ready_state(status)) {
 		fd_outb(byte, FD_DATA);
-#ifdef FLOPPY_SANITY_CHECK
 		output_log[output_log_pos].data = byte;
 		output_log[output_log_pos].status = status;
 		output_log[output_log_pos].jiffies = jiffies;
 		output_log_pos = (output_log_pos + 1) % OLOGSIZE;
-#endif
 		return 0;
 	}
 	FDCS->reset = 1;
-	if (!initialising) {
+	if (initialized) {
 		DPRINT("Unable to send byte %x to FDC. Fdc=%x Status=%x\n",
 		       byte, fdc, status);
 		show_floppy();
@@ -1199,8 +1176,6 @@ static int output_byte(char byte)
 	return -1;
 }
 
-#define LAST_OUT(x) if (output_byte(x)<0){ reset_fdc();return;}
-
 /* gets the response from the fdc */
 static int result(void)
 {
@@ -1208,14 +1183,13 @@ static int result(void)
 	int status = 0;
 
 	for (i = 0; i < MAX_REPLIES; i++) {
-		if ((status = wait_til_ready()) < 0)
+		status = wait_til_ready();
+		if (status < 0)
 			break;
 		status &= STATUS_DIR | STATUS_READY | STATUS_BUSY | STATUS_DMA;
 		if ((status & ~STATUS_BUSY) == STATUS_READY) {
-#ifdef FLOPPY_SANITY_CHECK
 			resultjiffies = jiffies;
 			resultsize = i;
-#endif
 			return i;
 		}
 		if (status == (STATUS_DIR | STATUS_READY | STATUS_BUSY))
@@ -1223,10 +1197,9 @@ static int result(void)
 		else
 			break;
 	}
-	if (!initialising) {
-		DPRINT
-		    ("get result error. Fdc=%d Last status=%x Read bytes=%d\n",
-		     fdc, status, i);
+	if (initialized) {
+		DPRINT("get result error. Fdc=%d Last status=%x Read bytes=%d\n",
+		       fdc, status, i);
 		show_floppy();
 	}
 	FDCS->reset = 1;
@@ -1237,12 +1210,14 @@ static int result(void)
 /* does the fdc need more output? */
 static int need_more_output(void)
 {
-	int status;
+	int status = wait_til_ready();
 
-	if ((status = wait_til_ready()) < 0)
+	if (status < 0)
 		return -1;
-	if ((status & (STATUS_READY | STATUS_DIR | STATUS_DMA)) == STATUS_READY)
+
+	if (is_ready_state(status))
 		return MORE_OUTPUT;
+
 	return result();
 }
 
@@ -1264,9 +1239,12 @@ static inline void perpendicular_mode(void)
 		default:
 			DPRINT("Invalid data rate for perpendicular mode!\n");
 			cont->done(0);
-			FDCS->reset = 1;	/* convenient way to return to
-						 * redo without to much hassle (deep
-						 * stack et al. */
+			FDCS->reset = 1;
+					/*
+					 * convenient way to return to
+					 * redo without too much hassle
+					 * (deep stack et al.)
+					 */
 			return;
 		}
 	} else
@@ -1366,9 +1344,9 @@ static void fdc_specify(void)
 
 	/* Convert step rate from microseconds to milliseconds and 4 bits */
 	srt = 16 - DIV_ROUND_UP(DP->srt * scale_dtr / 1000, NOMINAL_DTR);
-	if (slow_floppy) {
+	if (slow_floppy)
 		srt = srt / 4;
-	}
+
 	SUPBOUND(srt, 0xf);
 	INFBOUND(srt, 0);
 
@@ -1415,16 +1393,46 @@ static int fdc_dtr(void)
 	 * Pause 5 msec to avoid trouble. (Needs to be 2 jiffies)
 	 */
 	FDCS->dtr = raw_cmd->rate & 3;
-	return (fd_wait_for_completion(jiffies + 2UL * HZ / 100,
-				       (timeout_fn) floppy_ready));
+	return fd_wait_for_completion(jiffies + 2UL * HZ / 100,
+				      (timeout_fn)floppy_ready);
 }				/* fdc_dtr */
 
 static void tell_sector(void)
 {
-	printk(": track %d, head %d, sector %d, size %d",
-	       R_TRACK, R_HEAD, R_SECTOR, R_SIZECODE);
+	pr_cont(": track %d, head %d, sector %d, size %d",
+		R_TRACK, R_HEAD, R_SECTOR, R_SIZECODE);
 }				/* tell_sector */
 
+static void print_errors(void)
+{
+	DPRINT("");
+	if (ST0 & ST0_ECE) {
+		pr_cont("Recalibrate failed!");
+	} else if (ST2 & ST2_CRC) {
+		pr_cont("data CRC error");
+		tell_sector();
+	} else if (ST1 & ST1_CRC) {
+		pr_cont("CRC error");
+		tell_sector();
+	} else if ((ST1 & (ST1_MAM | ST1_ND)) ||
+		   (ST2 & ST2_MAM)) {
+		if (!probing) {
+			pr_cont("sector not found");
+			tell_sector();
+		} else
+			pr_cont("probe failed...");
+	} else if (ST2 & ST2_WC) {	/* seek error */
+		pr_cont("wrong cylinder");
+	} else if (ST2 & ST2_BC) {	/* cylinder marked as bad */
+		pr_cont("bad cylinder");
+	} else {
+		pr_cont("unknown error. ST[0..2] are: 0x%x 0x%x 0x%x",
+			ST0, ST1, ST2);
+		tell_sector();
+	}
+	pr_cont("\n");
+}
+
 /*
  * OK, this error interpreting routine is called after a
  * DMA read/write has succeeded
@@ -1437,7 +1445,7 @@ static int interpret_errors(void)
 	char bad;
 
 	if (inr != 7) {
-		DPRINT("-- FDC reply error");
+		DPRINT("-- FDC reply error\n");
 		FDCS->reset = 1;
 		return 1;
 	}
@@ -1450,43 +1458,17 @@ static int interpret_errors(void)
 		bad = 1;
 		if (ST1 & ST1_WP) {
 			DPRINT("Drive is write protected\n");
-			CLEARF(FD_DISK_WRITABLE);
+			clear_bit(FD_DISK_WRITABLE_BIT, &DRS->flags);
 			cont->done(0);
 			bad = 2;
 		} else if (ST1 & ST1_ND) {
-			SETF(FD_NEED_TWADDLE);
+			set_bit(FD_NEED_TWADDLE_BIT, &DRS->flags);
 		} else if (ST1 & ST1_OR) {
 			if (DP->flags & FTD_MSG)
 				DPRINT("Over/Underrun - retrying\n");
 			bad = 0;
 		} else if (*errors >= DP->max_errors.reporting) {
-			DPRINT("");
-			if (ST0 & ST0_ECE) {
-				printk("Recalibrate failed!");
-			} else if (ST2 & ST2_CRC) {
-				printk("data CRC error");
-				tell_sector();
-			} else if (ST1 & ST1_CRC) {
-				printk("CRC error");
-				tell_sector();
-			} else if ((ST1 & (ST1_MAM | ST1_ND))
-				   || (ST2 & ST2_MAM)) {
-				if (!probing) {
-					printk("sector not found");
-					tell_sector();
-				} else
-					printk("probe failed...");
-			} else if (ST2 & ST2_WC) {	/* seek error */
-				printk("wrong cylinder");
-			} else if (ST2 & ST2_BC) {	/* cylinder marked as bad */
-				printk("bad cylinder");
-			} else {
-				printk
-				    ("unknown error. ST[0..2] are: 0x%x 0x%x 0x%x",
-				     ST0, ST1, ST2);
-				tell_sector();
-			}
-			printk("\n");
+			print_errors();
 		}
 		if (ST2 & ST2_WC || ST2 & ST2_BC)
 			/* wrong cylinder => recal */
@@ -1531,9 +1513,9 @@ static void setup_rw_floppy(void)
 		 */
 		if (time_after(ready_date, jiffies + DP->select_delay)) {
 			ready_date -= DP->select_delay;
-			function = (timeout_fn) floppy_start;
+			function = (timeout_fn)floppy_start;
 		} else
-			function = (timeout_fn) setup_rw_floppy;
+			function = (timeout_fn)setup_rw_floppy;
 
 		/* wait until the floppy is spinning fast enough */
 		if (fd_wait_for_completion(ready_date, function))
@@ -1551,7 +1533,7 @@ static void setup_rw_floppy(void)
 	for (i = 0; i < raw_cmd->cmd_count; i++)
 		r |= output_byte(raw_cmd->cmd[i]);
 
-	debugt("rw_command: ");
+	debugt(__func__, "rw_command");
 
 	if (r) {
 		cont->error();
@@ -1574,7 +1556,7 @@ static int blind_seek;
  */
 static void seek_interrupt(void)
 {
-	debugt("seek interrupt:");
+	debugt(__func__, "");
 	if (inr != 2 || (ST0 & 0xF8) != 0x20) {
 		DPRINT("seek failed\n");
 		DRS->track = NEED_2_RECAL;
@@ -1583,14 +1565,11 @@ static void seek_interrupt(void)
 		return;
 	}
 	if (DRS->track >= 0 && DRS->track != ST1 && !blind_seek) {
-#ifdef DCL_DEBUG
-		if (DP->flags & FD_DEBUG) {
-			DPRINT
-			    ("clearing NEWCHANGE flag because of effective seek\n");
-			DPRINT("jiffies=%lu\n", jiffies);
-		}
-#endif
-		CLEARF(FD_DISK_NEWCHANGE);	/* effective seek */
+		debug_dcl(DP->flags,
+			  "clearing NEWCHANGE flag because of effective seek\n");
+		debug_dcl(DP->flags, "jiffies=%lu\n", jiffies);
+		clear_bit(FD_DISK_NEWCHANGE_BIT, &DRS->flags);
+					/* effective seek */
 		DRS->select_date = jiffies;
 	}
 	DRS->track = ST1;
@@ -1599,26 +1578,23 @@ static void seek_interrupt(void)
 
 static void check_wp(void)
 {
-	if (TESTF(FD_VERIFY)) {
-		/* check write protection */
+	if (test_bit(FD_VERIFY_BIT, &DRS->flags)) {
+					/* check write protection */
 		output_byte(FD_GETSTATUS);
 		output_byte(UNIT(current_drive));
 		if (result() != 1) {
 			FDCS->reset = 1;
 			return;
 		}
-		CLEARF(FD_VERIFY);
-		CLEARF(FD_NEED_TWADDLE);
-#ifdef DCL_DEBUG
-		if (DP->flags & FD_DEBUG) {
-			DPRINT("checking whether disk is write protected\n");
-			DPRINT("wp=%x\n", ST3 & 0x40);
-		}
-#endif
+		clear_bit(FD_VERIFY_BIT, &DRS->flags);
+		clear_bit(FD_NEED_TWADDLE_BIT, &DRS->flags);
+		debug_dcl(DP->flags,
+			  "checking whether disk is write protected\n");
+		debug_dcl(DP->flags, "wp=%x\n", ST3 & 0x40);
 		if (!(ST3 & 0x40))
-			SETF(FD_DISK_WRITABLE);
+			set_bit(FD_DISK_WRITABLE_BIT, &DRS->flags);
 		else
-			CLEARF(FD_DISK_WRITABLE);
+			clear_bit(FD_DISK_WRITABLE_BIT, &DRS->flags);
 	}
 }
 
@@ -1628,19 +1604,15 @@ static void seek_floppy(void)
 
 	blind_seek = 0;
 
-#ifdef DCL_DEBUG
-	if (DP->flags & FD_DEBUG) {
-		DPRINT("calling disk change from seek\n");
-	}
-#endif
+	debug_dcl(DP->flags, "calling disk change from %s\n", __func__);
 
-	if (!TESTF(FD_DISK_NEWCHANGE) &&
+	if (!test_bit(FD_DISK_NEWCHANGE_BIT, &DRS->flags) &&
 	    disk_change(current_drive) && (raw_cmd->flags & FD_RAW_NEED_DISK)) {
 		/* the media changed flag should be cleared after the seek.
 		 * If it isn't, this means that there is really no disk in
 		 * the drive.
 		 */
-		SETF(FD_DISK_CHANGED);
+		set_bit(FD_DISK_CHANGED_BIT, &DRS->flags);
 		cont->done(0);
 		cont->redo();
 		return;
@@ -1648,7 +1620,7 @@ static void seek_floppy(void)
 	if (DRS->track <= NEED_1_RECAL) {
 		recalibrate_floppy();
 		return;
-	} else if (TESTF(FD_DISK_NEWCHANGE) &&
+	} else if (test_bit(FD_DISK_NEWCHANGE_BIT, &DRS->flags) &&
 		   (raw_cmd->flags & FD_RAW_NEED_DISK) &&
 		   (DRS->track <= NO_TRACK || DRS->track == raw_cmd->track)) {
 		/* we seek to clear the media-changed condition. Does anybody
@@ -1677,19 +1649,22 @@ static void seek_floppy(void)
 	do_floppy = seek_interrupt;
 	output_byte(FD_SEEK);
 	output_byte(UNIT(current_drive));
-	LAST_OUT(track);
-	debugt("seek command:");
+	if (output_byte(track) < 0) {
+		reset_fdc();
+		return;
+	}
+	debugt(__func__, "");
 }
 
 static void recal_interrupt(void)
 {
-	debugt("recal interrupt:");
+	debugt(__func__, "");
 	if (inr != 2)
 		FDCS->reset = 1;
 	else if (ST0 & ST0_ECE) {
 		switch (DRS->track) {
 		case NEED_1_RECAL:
-			debugt("recal interrupt need 1 recal:");
+			debugt(__func__, "need 1 recal");
 			/* after a second recalibrate, we still haven't
 			 * reached track 0. Probably no drive. Raise an
 			 * error, as failing immediately might upset
@@ -1698,25 +1673,21 @@ static void recal_interrupt(void)
 			cont->redo();
 			return;
 		case NEED_2_RECAL:
-			debugt("recal interrupt need 2 recal:");
+			debugt(__func__, "need 2 recal");
 			/* If we already did a recalibrate,
 			 * and we are not at track 0, this
 			 * means we have moved. (The only way
 			 * not to move at recalibration is to
 			 * be already at track 0.) Clear the
 			 * new change flag */
-#ifdef DCL_DEBUG
-			if (DP->flags & FD_DEBUG) {
-				DPRINT
-				    ("clearing NEWCHANGE flag because of second recalibrate\n");
-			}
-#endif
+			debug_dcl(DP->flags,
+				  "clearing NEWCHANGE flag because of second recalibrate\n");
 
-			CLEARF(FD_DISK_NEWCHANGE);
+			clear_bit(FD_DISK_NEWCHANGE_BIT, &DRS->flags);
 			DRS->select_date = jiffies;
 			/* fall through */
 		default:
-			debugt("recal interrupt default:");
+			debugt(__func__, "default");
 			/* Recalibrate moves the head by at
 			 * most 80 steps. If after one
 			 * recalibrate we don't have reached
@@ -1738,8 +1709,8 @@ static void print_result(char *message, int inr)
 	DPRINT("%s ", message);
 	if (inr >= 0)
 		for (i = 0; i < inr; i++)
-			printk("repl[%d]=%x ", i, reply_buffer[i]);
-	printk("\n");
+			pr_cont("repl[%d]=%x ", i, reply_buffer[i]);
+	pr_cont("\n");
 }
 
 /* interrupt handler. Note that this can be called externally on the Sparc */
@@ -1760,10 +1731,10 @@ irqreturn_t floppy_interrupt(int irq, void *dev_id)
 	do_floppy = NULL;
 	if (fdc >= N_FDC || FDCS->address == -1) {
 		/* we don't even know which FDC is the culprit */
-		printk("DOR0=%x\n", fdc_state[0].dor);
-		printk("floppy interrupt on bizarre fdc %d\n", fdc);
-		printk("handler=%p\n", handler);
-		is_alive("bizarre fdc");
+		pr_info("DOR0=%x\n", fdc_state[0].dor);
+		pr_info("floppy interrupt on bizarre fdc %d\n", fdc);
+		pr_info("handler=%pf\n", handler);
+		is_alive(__func__, "bizarre fdc");
 		return IRQ_NONE;
 	}
 
@@ -1777,7 +1748,7 @@ irqreturn_t floppy_interrupt(int irq, void *dev_id)
 	 * activity.
 	 */
 
-	do_print = !handler && print_unex && !initialising;
+	do_print = !handler && print_unex && initialized;
 
 	inr = result();
 	if (do_print)
@@ -1790,15 +1761,15 @@ irqreturn_t floppy_interrupt(int irq, void *dev_id)
 			if (do_print)
 				print_result("sensei", inr);
 			max_sensei--;
-		} while ((ST0 & 0x83) != UNIT(current_drive) && inr == 2
-			 && max_sensei);
+		} while ((ST0 & 0x83) != UNIT(current_drive) &&
+			 inr == 2 && max_sensei);
 	}
 	if (!handler) {
 		FDCS->reset = 1;
 		return IRQ_NONE;
 	}
 	schedule_bh(handler);
-	is_alive("normal interrupt end");
+	is_alive(__func__, "normal interrupt end");
 
 	/* FIXME! Was it really for us? */
 	return IRQ_HANDLED;
@@ -1806,10 +1777,11 @@ irqreturn_t floppy_interrupt(int irq, void *dev_id)
 
 static void recalibrate_floppy(void)
 {
-	debugt("recalibrate floppy:");
+	debugt(__func__, "");
 	do_floppy = recal_interrupt;
 	output_byte(FD_RECALIBRATE);
-	LAST_OUT(UNIT(current_drive));
+	if (output_byte(UNIT(current_drive)) < 0)
+		reset_fdc();
 }
 
 /*
@@ -1817,10 +1789,10 @@ static void recalibrate_floppy(void)
  */
 static void reset_interrupt(void)
 {
-	debugt("reset interrupt:");
+	debugt(__func__, "");
 	result();		/* get the status ready for set_fdc */
 	if (FDCS->reset) {
-		printk("reset set in interrupt, calling %p\n", cont->error);
+		pr_info("reset set in interrupt, calling %pf\n", cont->error);
 		cont->error();	/* a reset just after a reset. BAD! */
 	}
 	cont->redo();
@@ -1858,53 +1830,49 @@ static void show_floppy(void)
 {
 	int i;
 
-	printk("\n");
-	printk("floppy driver state\n");
-	printk("-------------------\n");
-	printk("now=%lu last interrupt=%lu diff=%lu last called handler=%p\n",
-	       jiffies, interruptjiffies, jiffies - interruptjiffies,
-	       lasthandler);
+	pr_info("\n");
+	pr_info("floppy driver state\n");
+	pr_info("-------------------\n");
+	pr_info("now=%lu last interrupt=%lu diff=%lu last called handler=%pf\n",
+		jiffies, interruptjiffies, jiffies - interruptjiffies,
+		lasthandler);
 
-#ifdef FLOPPY_SANITY_CHECK
-	printk("timeout_message=%s\n", timeout_message);
-	printk("last output bytes:\n");
+	pr_info("timeout_message=%s\n", timeout_message);
+	pr_info("last output bytes:\n");
 	for (i = 0; i < OLOGSIZE; i++)
-		printk("%2x %2x %lu\n",
-		       output_log[(i + output_log_pos) % OLOGSIZE].data,
-		       output_log[(i + output_log_pos) % OLOGSIZE].status,
-		       output_log[(i + output_log_pos) % OLOGSIZE].jiffies);
-	printk("last result at %lu\n", resultjiffies);
-	printk("last redo_fd_request at %lu\n", lastredo);
-	for (i = 0; i < resultsize; i++) {
-		printk("%2x ", reply_buffer[i]);
-	}
-	printk("\n");
-#endif
-
-	printk("status=%x\n", fd_inb(FD_STATUS));
-	printk("fdc_busy=%lu\n", fdc_busy);
+		pr_info("%2x %2x %lu\n",
+			output_log[(i + output_log_pos) % OLOGSIZE].data,
+			output_log[(i + output_log_pos) % OLOGSIZE].status,
+			output_log[(i + output_log_pos) % OLOGSIZE].jiffies);
+	pr_info("last result at %lu\n", resultjiffies);
+	pr_info("last redo_fd_request at %lu\n", lastredo);
+	print_hex_dump(KERN_INFO, "", DUMP_PREFIX_NONE, 16, 1,
+		       reply_buffer, resultsize, true);
+
+	pr_info("status=%x\n", fd_inb(FD_STATUS));
+	pr_info("fdc_busy=%lu\n", fdc_busy);
 	if (do_floppy)
-		printk("do_floppy=%p\n", do_floppy);
+		pr_info("do_floppy=%pf\n", do_floppy);
 	if (work_pending(&floppy_work))
-		printk("floppy_work.func=%p\n", floppy_work.func);
+		pr_info("floppy_work.func=%pf\n", floppy_work.func);
 	if (timer_pending(&fd_timer))
-		printk("fd_timer.function=%p\n", fd_timer.function);
+		pr_info("fd_timer.function=%pf\n", fd_timer.function);
 	if (timer_pending(&fd_timeout)) {
-		printk("timer_function=%p\n", fd_timeout.function);
-		printk("expires=%lu\n", fd_timeout.expires - jiffies);
-		printk("now=%lu\n", jiffies);
-	}
-	printk("cont=%p\n", cont);
-	printk("current_req=%p\n", current_req);
-	printk("command_status=%d\n", command_status);
-	printk("\n");
+		pr_info("timer_function=%pf\n", fd_timeout.function);
+		pr_info("expires=%lu\n", fd_timeout.expires - jiffies);
+		pr_info("now=%lu\n", jiffies);
+	}
+	pr_info("cont=%p\n", cont);
+	pr_info("current_req=%p\n", current_req);
+	pr_info("command_status=%d\n", command_status);
+	pr_info("\n");
 }
 
 static void floppy_shutdown(unsigned long data)
 {
 	unsigned long flags;
 
-	if (!initialising)
+	if (initialized)
 		show_floppy();
 	cancel_activity();
 
@@ -1916,17 +1884,17 @@ static void floppy_shutdown(unsigned long data)
 
 	/* avoid dma going to a random drive after shutdown */
 
-	if (!initialising)
+	if (initialized)
 		DPRINT("floppy timeout called\n");
 	FDCS->reset = 1;
 	if (cont) {
 		cont->done(0);
 		cont->redo();	/* this will recall reset when needed */
 	} else {
-		printk("no cont in shutdown!\n");
+		pr_info("no cont in shutdown!\n");
 		process_fd_request();
 	}
-	is_alive("floppy shutdown");
+	is_alive(__func__, "");
 }
 
 /* start motor, check media-changed condition and write protection */
@@ -1954,27 +1922,26 @@ static int start_motor(void (*function)(void))
 	set_dor(fdc, mask, data);
 
 	/* wait_for_completion also schedules reset if needed. */
-	return (fd_wait_for_completion(DRS->select_date + DP->select_delay,
-				       (timeout_fn) function));
+	return fd_wait_for_completion(DRS->select_date + DP->select_delay,
+				      (timeout_fn)function);
 }
 
 static void floppy_ready(void)
 {
-	CHECK_RESET;
+	if (FDCS->reset) {
+		reset_fdc();
+		return;
+	}
 	if (start_motor(floppy_ready))
 		return;
 	if (fdc_dtr())
 		return;
 
-#ifdef DCL_DEBUG
-	if (DP->flags & FD_DEBUG) {
-		DPRINT("calling disk change from floppy_ready\n");
-	}
-#endif
+	debug_dcl(DP->flags, "calling disk change from floppy_ready\n");
 	if (!(raw_cmd->flags & FD_RAW_NO_MOTOR) &&
 	    disk_change(current_drive) && !DP->select_delay)
-		twaddle();	/* this clears the dcl on certain drive/controller
-				 * combinations */
+		twaddle();	/* this clears the dcl on certain
+				 * drive/controller combinations */
 
 #ifdef fd_chose_dma_mode
 	if ((raw_cmd->flags & FD_RAW_READ) || (raw_cmd->flags & FD_RAW_WRITE)) {
@@ -1998,15 +1965,11 @@ static void floppy_ready(void)
 
 static void floppy_start(void)
 {
-	reschedule_timeout(current_reqD, "floppy start", 0);
+	reschedule_timeout(current_reqD, "floppy start");
 
 	scandrives();
-#ifdef DCL_DEBUG
-	if (DP->flags & FD_DEBUG) {
-		DPRINT("setting NEWCHANGE in floppy_start\n");
-	}
-#endif
-	SETF(FD_DISK_NEWCHANGE);
+	debug_dcl(DP->flags, "setting NEWCHANGE in floppy_start\n");
+	set_bit(FD_DISK_NEWCHANGE_BIT, &DRS->flags);
 	floppy_ready();
 }
 
@@ -2026,7 +1989,7 @@ static void floppy_start(void)
 
 static void do_wakeup(void)
 {
-	reschedule_timeout(MAXTIMEOUT, "do wakeup", 0);
+	reschedule_timeout(MAXTIMEOUT, "do wakeup");
 	cont = NULL;
 	command_status += 2;
 	wake_up(&command_done);
@@ -2046,7 +2009,7 @@ static struct cont_t intr_cont = {
 	.done		= (done_f)empty
 };
 
-static int wait_til_done(void (*handler)(void), int interruptible)
+static int wait_til_done(void (*handler)(void), bool interruptible)
 {
 	int ret;
 
@@ -2064,7 +2027,7 @@ static int wait_til_done(void (*handler)(void), int interruptible)
 			if (command_status >= 2 || !NO_SIGNAL)
 				break;
 
-			is_alive("wait_til_done");
+			is_alive(__func__, "");
 			schedule();
 		}
 
@@ -2180,9 +2143,9 @@ static void format_interrupt(void)
 	cont->redo();
 }
 
-#define CODE2SIZE (ssize = ((1 << SIZECODE) + 3) >> 2)
-#define FM_MODE(x,y) ((y) & ~(((x)->rate & 0x80) >>1))
+#define FM_MODE(x, y) ((y) & ~(((x)->rate & 0x80) >> 1))
 #define CT(x) ((x) | 0xc0)
+
 static void setup_format_params(int track)
 {
 	int n;
@@ -2197,8 +2160,8 @@ static void setup_format_params(int track)
 	raw_cmd = &default_raw_cmd;
 	raw_cmd->track = track;
 
-	raw_cmd->flags = FD_RAW_WRITE | FD_RAW_INTR | FD_RAW_SPIN |
-	    FD_RAW_NEED_DISK | FD_RAW_NEED_SEEK;
+	raw_cmd->flags = (FD_RAW_WRITE | FD_RAW_INTR | FD_RAW_SPIN |
+			  FD_RAW_NEED_DISK | FD_RAW_NEED_SEEK);
 	raw_cmd->rate = _floppy->rate & 0x43;
 	raw_cmd->cmd_count = NR_F;
 	COMMAND = FM_MODE(_floppy, FD_FORMAT);
@@ -2257,7 +2220,7 @@ static void redo_format(void)
 	buffer_track = -1;
 	setup_format_params(format_req.track << STRETCH(_floppy));
 	floppy_start();
-	debugt("queue format request");
+	debugt(__func__, "queue format request");
 }
 
 static struct cont_t format_cont = {
@@ -2271,7 +2234,9 @@ static int do_format(int drive, struct format_descr *tmp_format_req)
 {
 	int ret;
 
-	LOCK_FDC(drive, 1);
+	if (lock_fdc(drive, true))
+		return -EINTR;
+
 	set_floppy(drive);
 	if (!_floppy ||
 	    _floppy->track > DP->tracks ||
@@ -2286,7 +2251,9 @@ static int do_format(int drive, struct format_descr *tmp_format_req)
 	format_errors = 0;
 	cont = &format_cont;
 	errors = &format_errors;
-	IWAIT(redo_format);
+	ret = wait_til_done(redo_format, true);
+	if (ret == -EINTR)
+		return -EINTR;
 	process_fd_request();
 	return ret;
 }
@@ -2320,12 +2287,14 @@ static void request_done(int uptodate)
 	struct request *req = current_req;
 	unsigned long flags;
 	int block;
+	char msg[sizeof("request done ") + sizeof(int) * 3];
 
 	probing = 0;
-	reschedule_timeout(MAXTIMEOUT, "request done %d", uptodate);
+	snprintf(msg, sizeof(msg), "request done %d", uptodate);
+	reschedule_timeout(MAXTIMEOUT, msg);
 
 	if (!req) {
-		printk("floppy.c: no request in request_done\n");
+		pr_info("floppy.c: no request in request_done\n");
 		return;
 	}
 
@@ -2377,7 +2346,7 @@ static void rw_interrupt(void)
 		DRS->first_read_date = jiffies;
 
 	nr_sectors = 0;
-	CODE2SIZE;
+	ssize = DIV_ROUND_UP(1 << SIZECODE, 4);
 
 	if (ST1 & ST1_EOC)
 		eoc = 1;
@@ -2393,20 +2362,18 @@ static void rw_interrupt(void)
 		       R_HEAD - HEAD) * SECT_PER_TRACK +
 		      R_SECTOR - SECTOR + eoc) << SIZECODE >> 2;
 
-#ifdef FLOPPY_SANITY_CHECK
 	if (nr_sectors / ssize >
 	    DIV_ROUND_UP(in_sector_offset + current_count_sectors, ssize)) {
 		DPRINT("long rw: %x instead of %lx\n",
 		       nr_sectors, current_count_sectors);
-		printk("rs=%d s=%d\n", R_SECTOR, SECTOR);
-		printk("rh=%d h=%d\n", R_HEAD, HEAD);
-		printk("rt=%d t=%d\n", R_TRACK, TRACK);
-		printk("heads=%d eoc=%d\n", heads, eoc);
-		printk("spt=%d st=%d ss=%d\n", SECT_PER_TRACK,
-		       fsector_t, ssize);
-		printk("in_sector_offset=%d\n", in_sector_offset);
+		pr_info("rs=%d s=%d\n", R_SECTOR, SECTOR);
+		pr_info("rh=%d h=%d\n", R_HEAD, HEAD);
+		pr_info("rt=%d t=%d\n", R_TRACK, TRACK);
+		pr_info("heads=%d eoc=%d\n", heads, eoc);
+		pr_info("spt=%d st=%d ss=%d\n",
+			SECT_PER_TRACK, fsector_t, ssize);
+		pr_info("in_sector_offset=%d\n", in_sector_offset);
 	}
-#endif
 
 	nr_sectors -= in_sector_offset;
 	INFBOUND(nr_sectors, 0);
@@ -2511,19 +2478,17 @@ static void copy_buffer(int ssize, int max_sector, int max_sector_2)
 					      blk_rq_sectors(current_req));
 
 	remaining = current_count_sectors << 9;
-#ifdef FLOPPY_SANITY_CHECK
 	if (remaining > blk_rq_bytes(current_req) && CT(COMMAND) == FD_WRITE) {
 		DPRINT("in copy buffer\n");
-		printk("current_count_sectors=%ld\n", current_count_sectors);
-		printk("remaining=%d\n", remaining >> 9);
-		printk("current_req->nr_sectors=%u\n",
-		       blk_rq_sectors(current_req));
-		printk("current_req->current_nr_sectors=%u\n",
-		       blk_rq_cur_sectors(current_req));
-		printk("max_sector=%d\n", max_sector);
-		printk("ssize=%d\n", ssize);
+		pr_info("current_count_sectors=%ld\n", current_count_sectors);
+		pr_info("remaining=%d\n", remaining >> 9);
+		pr_info("current_req->nr_sectors=%u\n",
+			blk_rq_sectors(current_req));
+		pr_info("current_req->current_nr_sectors=%u\n",
+			blk_rq_cur_sectors(current_req));
+		pr_info("max_sector=%d\n", max_sector);
+		pr_info("ssize=%d\n", ssize);
 	}
-#endif
 
 	buffer_max = max(max_sector, buffer_max);
 
@@ -2539,26 +2504,24 @@ static void copy_buffer(int ssize, int max_sector, int max_sector_2)
 		SUPBOUND(size, remaining);
 
 		buffer = page_address(bv->bv_page) + bv->bv_offset;
-#ifdef FLOPPY_SANITY_CHECK
 		if (dma_buffer + size >
 		    floppy_track_buffer + (max_buffer_sectors << 10) ||
 		    dma_buffer < floppy_track_buffer) {
 			DPRINT("buffer overrun in copy buffer %d\n",
-			       (int)((floppy_track_buffer -
-				      dma_buffer) >> 9));
-			printk("fsector_t=%d buffer_min=%d\n",
-			       fsector_t, buffer_min);
-			printk("current_count_sectors=%ld\n",
-			       current_count_sectors);
+			       (int)((floppy_track_buffer - dma_buffer) >> 9));
+			pr_info("fsector_t=%d buffer_min=%d\n",
+				fsector_t, buffer_min);
+			pr_info("current_count_sectors=%ld\n",
+				current_count_sectors);
 			if (CT(COMMAND) == FD_READ)
-				printk("read\n");
+				pr_info("read\n");
 			if (CT(COMMAND) == FD_WRITE)
-				printk("write\n");
+				pr_info("write\n");
 			break;
 		}
 		if (((unsigned long)buffer) % 512)
 			DPRINT("%p buffer not aligned\n", buffer);
-#endif
+
 		if (CT(COMMAND) == FD_READ)
 			memcpy(buffer, dma_buffer, size);
 		else
@@ -2567,13 +2530,11 @@ static void copy_buffer(int ssize, int max_sector, int max_sector_2)
 		remaining -= size;
 		dma_buffer += size;
 	}
-#ifdef FLOPPY_SANITY_CHECK
 	if (remaining) {
 		if (remaining > 0)
 			max_sector -= remaining >> 9;
 		DPRINT("weirdness: remaining %d\n", remaining >> 9);
 	}
-#endif
 }
 
 /* work around a bug in pseudo DMA
@@ -2593,15 +2554,14 @@ static void virtualdmabug_workaround(void)
 
 		hard_sectors = raw_cmd->length >> (7 + SIZECODE);
 		end_sector = SECTOR + hard_sectors - 1;
-#ifdef FLOPPY_SANITY_CHECK
 		if (end_sector > SECT_PER_TRACK) {
-			printk("too many sectors %d > %d\n",
-			       end_sector, SECT_PER_TRACK);
+			pr_info("too many sectors %d > %d\n",
+				end_sector, SECT_PER_TRACK);
 			return;
 		}
-#endif
-		SECT_PER_TRACK = end_sector;	/* make sure SECT_PER_TRACK points
-						 * to end of transfer */
+		SECT_PER_TRACK = end_sector;
+					/* make sure SECT_PER_TRACK
+					 * points to end of transfer */
 	}
 }
 
@@ -2624,7 +2584,7 @@ static int make_raw_rw_request(void)
 	int ssize;
 
 	if (max_buffer_sectors == 0) {
-		printk("VFS: Block I/O scheduled on unopened device\n");
+		pr_info("VFS: Block I/O scheduled on unopened device\n");
 		return 0;
 	}
 
@@ -2641,7 +2601,7 @@ static int make_raw_rw_request(void)
 		raw_cmd->flags |= FD_RAW_WRITE;
 		COMMAND = FM_MODE(_floppy, FD_WRITE);
 	} else {
-		DPRINT("make_raw_rw_request: unknown command\n");
+		DPRINT("%s: unknown command\n", __func__);
 		return 0;
 	}
 
@@ -2659,7 +2619,8 @@ static int make_raw_rw_request(void)
 	HEAD = fsector_t / _floppy->sect;
 
 	if (((_floppy->stretch & (FD_SWAPSIDES | FD_SECTBASEMASK)) ||
-	     TESTF(FD_NEED_TWADDLE)) && fsector_t < _floppy->sect)
+	     test_bit(FD_NEED_TWADDLE_BIT, &DRS->flags)) &&
+	    fsector_t < _floppy->sect)
 		max_sector = _floppy->sect;
 
 	/* 2M disks have phantom sectors on the first track */
@@ -2685,7 +2646,7 @@ static int make_raw_rw_request(void)
 	raw_cmd->track = TRACK << STRETCH(_floppy);
 	DR_SELECT = UNIT(current_drive) + PH_HEAD(_floppy, HEAD);
 	GAP = _floppy->gap;
-	CODE2SIZE;
+	ssize = DIV_ROUND_UP(1 << SIZECODE, 4);
 	SECT_PER_TRACK = _floppy->sect << 2 >> SIZECODE;
 	SECTOR = ((fsector_t % _floppy->sect) << 2 >> SIZECODE) +
 	    FD_SECTBASE(_floppy);
@@ -2730,8 +2691,10 @@ static int make_raw_rw_request(void)
 		}
 	} else if (in_sector_offset || blk_rq_sectors(current_req) < ssize) {
 		if (CT(COMMAND) == FD_WRITE) {
-			if (fsector_t + blk_rq_sectors(current_req) > ssize &&
-			    fsector_t + blk_rq_sectors(current_req) < ssize + ssize)
+			unsigned int sectors;
+
+			sectors = fsector_t + blk_rq_sectors(current_req);
+			if (sectors > ssize && sectors < ssize + ssize)
 				max_size = ssize + ssize;
 			else
 				max_size = ssize;
@@ -2752,12 +2715,10 @@ static int make_raw_rw_request(void)
 		 * on a 64 bit machine!
 		 */
 		max_size = buffer_chain_size();
-		dma_limit =
-		    (MAX_DMA_ADDRESS -
-		     ((unsigned long)current_req->buffer)) >> 9;
-		if ((unsigned long)max_size > dma_limit) {
+		dma_limit = (MAX_DMA_ADDRESS -
+			     ((unsigned long)current_req->buffer)) >> 9;
+		if ((unsigned long)max_size > dma_limit)
 			max_size = dma_limit;
-		}
 		/* 64 kb boundaries */
 		if (CROSS_64KB(current_req->buffer, max_size << 9))
 			max_size = (K_64 -
@@ -2773,16 +2734,16 @@ static int make_raw_rw_request(void)
 		 */
 		if (!direct ||
 		    (indirect * 2 > direct * 3 &&
-		     *errors < DP->max_errors.read_track && ((!probing
-		       || (DP->read_track & (1 << DRS->probed_format)))))) {
+		     *errors < DP->max_errors.read_track &&
+		     ((!probing ||
+		       (DP->read_track & (1 << DRS->probed_format)))))) {
 			max_size = blk_rq_sectors(current_req);
 		} else {
 			raw_cmd->kernel_data = current_req->buffer;
 			raw_cmd->length = current_count_sectors << 9;
 			if (raw_cmd->length == 0) {
-				DPRINT
-				    ("zero dma transfer attempted from make_raw_request\n");
-				DPRINT("indirect=%d direct=%d fsector_t=%d",
+				DPRINT("%s: zero dma transfer attempted\n", __func__);
+				DPRINT("indirect=%d direct=%d fsector_t=%d\n",
 				       indirect, direct, fsector_t);
 				return 0;
 			}
@@ -2802,25 +2763,22 @@ static int make_raw_rw_request(void)
 	    ((CT(COMMAND) == FD_READ ||
 	      (!in_sector_offset && blk_rq_sectors(current_req) >= ssize)) &&
 	     max_sector > 2 * max_buffer_sectors + buffer_min &&
-	     max_size + fsector_t > 2 * max_buffer_sectors + buffer_min)
-	    /* not enough space */
-	    ) {
+	     max_size + fsector_t > 2 * max_buffer_sectors + buffer_min)) {
+		/* not enough space */
 		buffer_track = -1;
 		buffer_drive = current_drive;
 		buffer_max = buffer_min = aligned_sector_t;
 	}
 	raw_cmd->kernel_data = floppy_track_buffer +
-	    ((aligned_sector_t - buffer_min) << 9);
+		((aligned_sector_t - buffer_min) << 9);
 
 	if (CT(COMMAND) == FD_WRITE) {
 		/* copy write buffer to track buffer.
 		 * if we get here, we know that the write
 		 * is either aligned or the data already in the buffer
 		 * (buffer will be overwritten) */
-#ifdef FLOPPY_SANITY_CHECK
 		if (in_sector_offset && buffer_track == -1)
 			DPRINT("internal error offset !=0 on write\n");
-#endif
 		buffer_track = raw_cmd->track;
 		buffer_drive = current_drive;
 		copy_buffer(ssize, max_sector,
@@ -2834,7 +2792,6 @@ static int make_raw_rw_request(void)
 	raw_cmd->length = in_sector_offset + current_count_sectors;
 	raw_cmd->length = ((raw_cmd->length - 1) | (ssize - 1)) + 1;
 	raw_cmd->length <<= 9;
-#ifdef FLOPPY_SANITY_CHECK
 	if ((raw_cmd->length < current_count_sectors << 9) ||
 	    (raw_cmd->kernel_data != current_req->buffer &&
 	     CT(COMMAND) == FD_WRITE &&
@@ -2845,19 +2802,19 @@ static int make_raw_rw_request(void)
 		DPRINT("fractionary current count b=%lx s=%lx\n",
 		       raw_cmd->length, current_count_sectors);
 		if (raw_cmd->kernel_data != current_req->buffer)
-			printk("addr=%d, length=%ld\n",
-			       (int)((raw_cmd->kernel_data -
-				      floppy_track_buffer) >> 9),
-			       current_count_sectors);
-		printk("st=%d ast=%d mse=%d msi=%d\n",
-		       fsector_t, aligned_sector_t, max_sector, max_size);
-		printk("ssize=%x SIZECODE=%d\n", ssize, SIZECODE);
-		printk("command=%x SECTOR=%d HEAD=%d, TRACK=%d\n",
-		       COMMAND, SECTOR, HEAD, TRACK);
-		printk("buffer drive=%d\n", buffer_drive);
-		printk("buffer track=%d\n", buffer_track);
-		printk("buffer_min=%d\n", buffer_min);
-		printk("buffer_max=%d\n", buffer_max);
+			pr_info("addr=%d, length=%ld\n",
+				(int)((raw_cmd->kernel_data -
+				       floppy_track_buffer) >> 9),
+				current_count_sectors);
+		pr_info("st=%d ast=%d mse=%d msi=%d\n",
+			fsector_t, aligned_sector_t, max_sector, max_size);
+		pr_info("ssize=%x SIZECODE=%d\n", ssize, SIZECODE);
+		pr_info("command=%x SECTOR=%d HEAD=%d, TRACK=%d\n",
+			COMMAND, SECTOR, HEAD, TRACK);
+		pr_info("buffer drive=%d\n", buffer_drive);
+		pr_info("buffer track=%d\n", buffer_track);
+		pr_info("buffer_min=%d\n", buffer_min);
+		pr_info("buffer_max=%d\n", buffer_max);
 		return 0;
 	}
 
@@ -2868,14 +2825,14 @@ static int make_raw_rw_request(void)
 		    raw_cmd->kernel_data + raw_cmd->length >
 		    floppy_track_buffer + (max_buffer_sectors << 10)) {
 			DPRINT("buffer overrun in schedule dma\n");
-			printk("fsector_t=%d buffer_min=%d current_count=%ld\n",
-			       fsector_t, buffer_min, raw_cmd->length >> 9);
-			printk("current_count_sectors=%ld\n",
-			       current_count_sectors);
+			pr_info("fsector_t=%d buffer_min=%d current_count=%ld\n",
+				fsector_t, buffer_min, raw_cmd->length >> 9);
+			pr_info("current_count_sectors=%ld\n",
+				current_count_sectors);
 			if (CT(COMMAND) == FD_READ)
-				printk("read\n");
+				pr_info("read\n");
 			if (CT(COMMAND) == FD_WRITE)
-				printk("write\n");
+				pr_info("write\n");
 			return 0;
 		}
 	} else if (raw_cmd->length > blk_rq_bytes(current_req) ||
@@ -2884,14 +2841,13 @@ static int make_raw_rw_request(void)
 		return 0;
 	} else if (raw_cmd->length < current_count_sectors << 9) {
 		DPRINT("more sectors than bytes\n");
-		printk("bytes=%ld\n", raw_cmd->length >> 9);
-		printk("sectors=%ld\n", current_count_sectors);
+		pr_info("bytes=%ld\n", raw_cmd->length >> 9);
+		pr_info("sectors=%ld\n", current_count_sectors);
 	}
 	if (raw_cmd->length == 0) {
 		DPRINT("zero dma transfer attempted from make_raw_request\n");
 		return 0;
 	}
-#endif
 
 	virtualdmabug_workaround();
 	return 2;
@@ -2899,7 +2855,6 @@ static int make_raw_rw_request(void)
 
 static void redo_fd_request(void)
 {
-#define REPEAT {request_done(0); continue; }
 	int drive;
 	int tmp;
 
@@ -2907,63 +2862,63 @@ static void redo_fd_request(void)
 	if (current_drive < N_DRIVE)
 		floppy_off(current_drive);
 
-	for (;;) {
-		if (!current_req) {
-			struct request *req;
-
-			spin_lock_irq(floppy_queue->queue_lock);
-			req = blk_fetch_request(floppy_queue);
-			spin_unlock_irq(floppy_queue->queue_lock);
-			if (!req) {
-				do_floppy = NULL;
-				unlock_fdc();
-				return;
-			}
-			current_req = req;
-		}
-		drive = (long)current_req->rq_disk->private_data;
-		set_fdc(drive);
-		reschedule_timeout(current_reqD, "redo fd request", 0);
+do_request:
+	if (!current_req) {
+		struct request *req;
 
-		set_floppy(drive);
-		raw_cmd = &default_raw_cmd;
-		raw_cmd->flags = 0;
-		if (start_motor(redo_fd_request))
+		spin_lock_irq(floppy_queue->queue_lock);
+		req = blk_fetch_request(floppy_queue);
+		spin_unlock_irq(floppy_queue->queue_lock);
+		if (!req) {
+			do_floppy = NULL;
+			unlock_fdc();
 			return;
-		disk_change(current_drive);
-		if (test_bit(current_drive, &fake_change) ||
-		    TESTF(FD_DISK_CHANGED)) {
-			DPRINT("disk absent or changed during operation\n");
-			REPEAT;
-		}
-		if (!_floppy) {	/* Autodetection */
-			if (!probing) {
-				DRS->probed_format = 0;
-				if (next_valid_format()) {
-					DPRINT("no autodetectable formats\n");
-					_floppy = NULL;
-					REPEAT;
-				}
-			}
-			probing = 1;
-			_floppy =
-			    floppy_type + DP->autodetect[DRS->probed_format];
-		} else
-			probing = 0;
-		errors = &(current_req->errors);
-		tmp = make_raw_rw_request();
-		if (tmp < 2) {
-			request_done(tmp);
-			continue;
 		}
+		current_req = req;
+	}
+	drive = (long)current_req->rq_disk->private_data;
+	set_fdc(drive);
+	reschedule_timeout(current_reqD, "redo fd request");
 
-		if (TESTF(FD_NEED_TWADDLE))
-			twaddle();
-		schedule_bh(floppy_start);
-		debugt("queue fd request");
+	set_floppy(drive);
+	raw_cmd = &default_raw_cmd;
+	raw_cmd->flags = 0;
+	if (start_motor(redo_fd_request))
 		return;
+
+	disk_change(current_drive);
+	if (test_bit(current_drive, &fake_change) ||
+	    test_bit(FD_DISK_CHANGED_BIT, &DRS->flags)) {
+		DPRINT("disk absent or changed during operation\n");
+		request_done(0);
+		goto do_request;
+	}
+	if (!_floppy) {	/* Autodetection */
+		if (!probing) {
+			DRS->probed_format = 0;
+			if (next_valid_format()) {
+				DPRINT("no autodetectable formats\n");
+				_floppy = NULL;
+				request_done(0);
+				goto do_request;
+			}
+		}
+		probing = 1;
+		_floppy = floppy_type + DP->autodetect[DRS->probed_format];
+	} else
+		probing = 0;
+	errors = &(current_req->errors);
+	tmp = make_raw_rw_request();
+	if (tmp < 2) {
+		request_done(tmp);
+		goto do_request;
 	}
-#undef REPEAT
+
+	if (test_bit(FD_NEED_TWADDLE_BIT, &DRS->flags))
+		twaddle();
+	schedule_bh(floppy_start);
+	debugt(__func__, "queue fd request");
+	return;
 }
 
 static struct cont_t rw_cont = {
@@ -2979,30 +2934,30 @@ static void process_fd_request(void)
 	schedule_bh(redo_fd_request);
 }
 
-static void do_fd_request(struct request_queue * q)
+static void do_fd_request(struct request_queue *q)
 {
 	if (max_buffer_sectors == 0) {
-		printk("VFS: do_fd_request called on non-open device\n");
+		pr_info("VFS: %s called on non-open device\n", __func__);
 		return;
 	}
 
 	if (usage_count == 0) {
-		printk("warning: usage count=0, current_req=%p exiting\n",
-		       current_req);
-		printk("sect=%ld type=%x flags=%x\n",
-		       (long)blk_rq_pos(current_req), current_req->cmd_type,
-		       current_req->cmd_flags);
+		pr_info("warning: usage count=0, current_req=%p exiting\n",
+			current_req);
+		pr_info("sect=%ld type=%x flags=%x\n",
+			(long)blk_rq_pos(current_req), current_req->cmd_type,
+			current_req->cmd_flags);
 		return;
 	}
 	if (test_bit(0, &fdc_busy)) {
 		/* fdc busy, this new request will be treated when the
 		   current one is done */
-		is_alive("do fd request, old request running");
+		is_alive(__func__, "old request running");
 		return;
 	}
-	lock_fdc(MAXTIMEOUT, 0);
+	lock_fdc(MAXTIMEOUT, false);
 	process_fd_request();
-	is_alive("do fd request");
+	is_alive(__func__, "");
 }
 
 static struct cont_t poll_cont = {
@@ -3012,24 +2967,18 @@ static struct cont_t poll_cont = {
 	.done		= generic_done
 };
 
-static int poll_drive(int interruptible, int flag)
+static int poll_drive(bool interruptible, int flag)
 {
-	int ret;
-
 	/* no auto-sense, just clear dcl */
 	raw_cmd = &default_raw_cmd;
 	raw_cmd->flags = flag;
 	raw_cmd->track = 0;
 	raw_cmd->cmd_count = 0;
 	cont = &poll_cont;
-#ifdef DCL_DEBUG
-	if (DP->flags & FD_DEBUG) {
-		DPRINT("setting NEWCHANGE in poll_drive\n");
-	}
-#endif
-	SETF(FD_DISK_NEWCHANGE);
-	WAIT(floppy_ready);
-	return ret;
+	debug_dcl(DP->flags, "setting NEWCHANGE in poll_drive\n");
+	set_bit(FD_DISK_NEWCHANGE_BIT, &DRS->flags);
+
+	return wait_til_done(floppy_ready, interruptible);
 }
 
 /*
@@ -3039,7 +2988,7 @@ static int poll_drive(int interruptible, int flag)
 
 static void reset_intr(void)
 {
-	printk("weird, reset interrupt called\n");
+	pr_info("weird, reset interrupt called\n");
 }
 
 static struct cont_t reset_cont = {
@@ -3049,20 +2998,23 @@ static struct cont_t reset_cont = {
 	.done		= generic_done
 };
 
-static int user_reset_fdc(int drive, int arg, int interruptible)
+static int user_reset_fdc(int drive, int arg, bool interruptible)
 {
 	int ret;
 
-	ret = 0;
-	LOCK_FDC(drive, interruptible);
+	if (lock_fdc(drive, interruptible))
+		return -EINTR;
+
 	if (arg == FD_RESET_ALWAYS)
 		FDCS->reset = 1;
 	if (FDCS->reset) {
 		cont = &reset_cont;
-		WAIT(reset_fdc);
+		ret = wait_til_done(reset_fdc, interruptible);
+		if (ret == -EINTR)
+			return -EINTR;
 	}
 	process_fd_request();
-	return ret;
+	return 0;
 }
 
 /*
@@ -3075,17 +3027,12 @@ static inline int fd_copyout(void __user *param, const void *address,
 	return copy_to_user(param, address, size) ? -EFAULT : 0;
 }
 
-static inline int fd_copyin(void __user *param, void *address, unsigned long size)
+static inline int fd_copyin(void __user *param, void *address,
+			    unsigned long size)
 {
 	return copy_from_user(address, param, size) ? -EFAULT : 0;
 }
 
-#define _COPYOUT(x) (copy_to_user((void __user *)param, &(x), sizeof(x)) ? -EFAULT : 0)
-#define _COPYIN(x) (copy_from_user(&(x), (void __user *)param, sizeof(x)) ? -EFAULT : 0)
-
-#define COPYOUT(x) ECALL(_COPYOUT(x))
-#define COPYIN(x) ECALL(_COPYIN(x))
-
 static inline const char *drive_name(int type, int drive)
 {
 	struct floppy_struct *floppy;
@@ -3156,23 +3103,29 @@ static struct cont_t raw_cmd_cont = {
 	.done		= raw_cmd_done
 };
 
-static inline int raw_cmd_copyout(int cmd, char __user *param,
+static inline int raw_cmd_copyout(int cmd, void __user *param,
 				  struct floppy_raw_cmd *ptr)
 {
 	int ret;
 
 	while (ptr) {
-		COPYOUT(*ptr);
+		ret = copy_to_user(param, ptr, sizeof(*ptr));
+		if (ret)
+			return -EFAULT;
 		param += sizeof(struct floppy_raw_cmd);
 		if ((ptr->flags & FD_RAW_READ) && ptr->buffer_length) {
-			if (ptr->length >= 0
-			    && ptr->length <= ptr->buffer_length)
-				ECALL(fd_copyout
-				      (ptr->data, ptr->kernel_data,
-				       ptr->buffer_length - ptr->length));
+			if (ptr->length >= 0 &&
+			    ptr->length <= ptr->buffer_length) {
+				long length = ptr->buffer_length - ptr->length;
+				ret = fd_copyout(ptr->data, ptr->kernel_data,
+						 length);
+				if (ret)
+					return ret;
+			}
 		}
 		ptr = ptr->next;
 	}
+
 	return 0;
 }
 
@@ -3195,7 +3148,7 @@ static void raw_cmd_free(struct floppy_raw_cmd **ptr)
 	}
 }
 
-static inline int raw_cmd_copyin(int cmd, char __user *param,
+static inline int raw_cmd_copyin(int cmd, void __user *param,
 				 struct floppy_raw_cmd **rcmd)
 {
 	struct floppy_raw_cmd *ptr;
@@ -3203,17 +3156,19 @@ static inline int raw_cmd_copyin(int cmd, char __user *param,
 	int i;
 
 	*rcmd = NULL;
-	while (1) {
-		ptr = (struct floppy_raw_cmd *)
-		    kmalloc(sizeof(struct floppy_raw_cmd), GFP_USER);
-		if (!ptr)
-			return -ENOMEM;
-		*rcmd = ptr;
-		COPYIN(*ptr);
-		ptr->next = NULL;
-		ptr->buffer_length = 0;
-		param += sizeof(struct floppy_raw_cmd);
-		if (ptr->cmd_count > 33)
+
+loop:
+	ptr = kmalloc(sizeof(struct floppy_raw_cmd), GFP_USER);
+	if (!ptr)
+		return -ENOMEM;
+	*rcmd = ptr;
+	ret = copy_from_user(ptr, param, sizeof(*ptr));
+	if (ret)
+		return -EFAULT;
+	ptr->next = NULL;
+	ptr->buffer_length = 0;
+	param += sizeof(struct floppy_raw_cmd);
+	if (ptr->cmd_count > 33)
 			/* the command may now also take up the space
 			 * initially intended for the reply & the
 			 * reply count. Needed for long 82078 commands
@@ -3222,31 +3177,35 @@ static inline int raw_cmd_copyin(int cmd, char __user *param,
 			 * 16 bytes for a structure, you'll one day
 			 * discover that you really need 17...
 			 */
+		return -EINVAL;
+
+	for (i = 0; i < 16; i++)
+		ptr->reply[i] = 0;
+	ptr->resultcode = 0;
+	ptr->kernel_data = NULL;
+
+	if (ptr->flags & (FD_RAW_READ | FD_RAW_WRITE)) {
+		if (ptr->length <= 0)
 			return -EINVAL;
+		ptr->kernel_data = (char *)fd_dma_mem_alloc(ptr->length);
+		fallback_on_nodma_alloc(&ptr->kernel_data, ptr->length);
+		if (!ptr->kernel_data)
+			return -ENOMEM;
+		ptr->buffer_length = ptr->length;
+	}
+	if (ptr->flags & FD_RAW_WRITE) {
+		ret = fd_copyin(ptr->data, ptr->kernel_data, ptr->length);
+		if (ret)
+			return ret;
+	}
 
-		for (i = 0; i < 16; i++)
-			ptr->reply[i] = 0;
-		ptr->resultcode = 0;
-		ptr->kernel_data = NULL;
-
-		if (ptr->flags & (FD_RAW_READ | FD_RAW_WRITE)) {
-			if (ptr->length <= 0)
-				return -EINVAL;
-			ptr->kernel_data =
-			    (char *)fd_dma_mem_alloc(ptr->length);
-			fallback_on_nodma_alloc(&ptr->kernel_data, ptr->length);
-			if (!ptr->kernel_data)
-				return -ENOMEM;
-			ptr->buffer_length = ptr->length;
-		}
-		if (ptr->flags & FD_RAW_WRITE)
-			ECALL(fd_copyin(ptr->data, ptr->kernel_data,
-					ptr->length));
+	if (ptr->flags & FD_RAW_MORE) {
 		rcmd = &(ptr->next);
-		if (!(ptr->flags & FD_RAW_MORE))
-			return 0;
 		ptr->rate &= 0x43;
+		goto loop;
 	}
+
+	return 0;
 }
 
 static int raw_cmd_ioctl(int cmd, void __user *param)
@@ -3283,12 +3242,8 @@ static int raw_cmd_ioctl(int cmd, void __user *param)
 
 	raw_cmd = my_raw_cmd;
 	cont = &raw_cmd_cont;
-	ret = wait_til_done(floppy_start, 1);
-#ifdef DCL_DEBUG
-	if (DP->flags & FD_DEBUG) {
-		DPRINT("calling disk change from raw_cmd ioctl\n");
-	}
-#endif
+	ret = wait_til_done(floppy_start, true);
+	debug_dcl(DP->flags, "calling disk change from raw_cmd ioctl\n");
 
 	if (ret != -EINTR && FDCS->reset)
 		ret = -EIO;
@@ -3327,7 +3282,7 @@ static inline int set_geometry(unsigned int cmd, struct floppy_struct *g,
 		if (!capable(CAP_SYS_ADMIN))
 			return -EPERM;
 		mutex_lock(&open_lock);
-		if (lock_fdc(drive, 1)) {
+		if (lock_fdc(drive, true)) {
 			mutex_unlock(&open_lock);
 			return -EINTR;
 		}
@@ -3346,11 +3301,15 @@ static inline int set_geometry(unsigned int cmd, struct floppy_struct *g,
 		mutex_unlock(&open_lock);
 	} else {
 		int oldStretch;
-		LOCK_FDC(drive, 1);
-		if (cmd != FDDEFPRM)
+
+		if (lock_fdc(drive, true))
+			return -EINTR;
+		if (cmd != FDDEFPRM) {
 			/* notice a disk change immediately, else
 			 * we lose our settings immediately*/
-			CALL(poll_drive(1, FD_RAW_NEED_DISK));
+			if (poll_drive(true, FD_RAW_NEED_DISK) == -EINTR)
+				return -EINTR;
+		}
 		oldStretch = g->stretch;
 		user_params[drive] = *g;
 		if (buffer_drive == drive)
@@ -3415,7 +3374,7 @@ static inline int normalize_ioctl(int *cmd, int *size)
 			*size = _IOC_SIZE(*cmd);
 			*cmd = ioctl_table[i];
 			if (*size > _IOC_SIZE(*cmd)) {
-				printk("ioctl not yet supported\n");
+				pr_info("ioctl not yet supported\n");
 				return -EFAULT;
 			}
 			return 0;
@@ -3429,8 +3388,10 @@ static int get_floppy_geometry(int drive, int type, struct floppy_struct **g)
 	if (type)
 		*g = &floppy_type[type];
 	else {
-		LOCK_FDC(drive, 0);
-		CALL(poll_drive(0, 0));
+		if (lock_fdc(drive, false))
+			return -EINTR;
+		if (poll_drive(false, 0) == -EINTR)
+			return -EINTR;
 		process_fd_request();
 		*g = current_type[drive];
 	}
@@ -3459,10 +3420,6 @@ static int fd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
 static int fd_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd,
 		    unsigned long param)
 {
-#define FD_IOCTL_ALLOWED (mode & (FMODE_WRITE|FMODE_WRITE_IOCTL))
-#define OUT(c,x) case c: outparam = (const char *) (x); break
-#define IN(c,x,tag) case c: *(x) = inparam. tag ; return 0
-
 	int drive = (long)bdev->bd_disk->private_data;
 	int type = ITYPE(UDRS->fd_device);
 	int i;
@@ -3474,26 +3431,28 @@ static int fd_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd,
 		struct floppy_max_errors max_errors;
 		struct floppy_drive_params dp;
 	} inparam;		/* parameters coming from user space */
-	const char *outparam;	/* parameters passed back to user space */
+	const void *outparam;	/* parameters passed back to user space */
 
 	/* convert compatibility eject ioctls into floppy eject ioctl.
 	 * We do this in order to provide a means to eject floppy disks before
 	 * installing the new fdutils package */
 	if (cmd == CDROMEJECT ||	/* CD-ROM eject */
-	    cmd == 0x6470 /* SunOS floppy eject */ ) {
+	    cmd == 0x6470) {		/* SunOS floppy eject */
 		DPRINT("obsolete eject ioctl\n");
 		DPRINT("please use floppycontrol --eject\n");
 		cmd = FDEJECT;
 	}
 
-	/* convert the old style command into a new style command */
-	if ((cmd & 0xff00) == 0x0200) {
-		ECALL(normalize_ioctl(&cmd, &size));
-	} else
+	if (!((cmd & 0xff00) == 0x0200))
 		return -EINVAL;
 
+	/* convert the old style command into a new style command */
+	ret = normalize_ioctl(&cmd, &size);
+	if (ret)
+		return ret;
+
 	/* permission checks */
-	if (((cmd & 0x40) && !FD_IOCTL_ALLOWED) ||
+	if (((cmd & 0x40) && !(mode & (FMODE_WRITE | FMODE_WRITE_IOCTL))) ||
 	    ((cmd & 0x80) && !capable(CAP_SYS_ADMIN)))
 		return -EPERM;
 
@@ -3501,129 +3460,142 @@ static int fd_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd,
 		return -EINVAL;
 
 	/* copyin */
-	CLEARSTRUCT(&inparam);
-	if (_IOC_DIR(cmd) & _IOC_WRITE)
-	    ECALL(fd_copyin((void __user *)param, &inparam, size))
-
-		switch (cmd) {
-		case FDEJECT:
-			if (UDRS->fd_ref != 1)
-				/* somebody else has this drive open */
-				return -EBUSY;
-			LOCK_FDC(drive, 1);
-
-			/* do the actual eject. Fails on
-			 * non-Sparc architectures */
-			ret = fd_eject(UNIT(drive));
-
-			USETF(FD_DISK_CHANGED);
-			USETF(FD_VERIFY);
-			process_fd_request();
+	memset(&inparam, 0, sizeof(inparam));
+	if (_IOC_DIR(cmd) & _IOC_WRITE) {
+		ret = fd_copyin((void __user *)param, &inparam, size);
+		if (ret)
 			return ret;
-		case FDCLRPRM:
-			LOCK_FDC(drive, 1);
-			current_type[drive] = NULL;
-			floppy_sizes[drive] = MAX_DISK_SIZE << 1;
-			UDRS->keep_data = 0;
-			return invalidate_drive(bdev);
-		case FDSETPRM:
-		case FDDEFPRM:
-			return set_geometry(cmd, &inparam.g,
-					    drive, type, bdev);
-		case FDGETPRM:
-			ECALL(get_floppy_geometry(drive, type,
-						  (struct floppy_struct **)
-						  &outparam));
-			break;
-
-		case FDMSGON:
-			UDP->flags |= FTD_MSG;
-			return 0;
-		case FDMSGOFF:
-			UDP->flags &= ~FTD_MSG;
-			return 0;
-
-		case FDFMTBEG:
-			LOCK_FDC(drive, 1);
-			CALL(poll_drive(1, FD_RAW_NEED_DISK));
-			ret = UDRS->flags;
-			process_fd_request();
-			if (ret & FD_VERIFY)
-				return -ENODEV;
-			if (!(ret & FD_DISK_WRITABLE))
-				return -EROFS;
-			return 0;
-		case FDFMTTRK:
-			if (UDRS->fd_ref != 1)
-				return -EBUSY;
-			return do_format(drive, &inparam.f);
-		case FDFMTEND:
-		case FDFLUSH:
-			LOCK_FDC(drive, 1);
-			return invalidate_drive(bdev);
-
-		case FDSETEMSGTRESH:
-			UDP->max_errors.reporting =
-			    (unsigned short)(param & 0x0f);
-			return 0;
-			OUT(FDGETMAXERRS, &UDP->max_errors);
-			IN(FDSETMAXERRS, &UDP->max_errors, max_errors);
-
-		case FDGETDRVTYP:
-			outparam = drive_name(type, drive);
-			SUPBOUND(size, strlen(outparam) + 1);
-			break;
-
-			IN(FDSETDRVPRM, UDP, dp);
-			OUT(FDGETDRVPRM, UDP);
-
-		case FDPOLLDRVSTAT:
-			LOCK_FDC(drive, 1);
-			CALL(poll_drive(1, FD_RAW_NEED_DISK));
-			process_fd_request();
-			/* fall through */
-			OUT(FDGETDRVSTAT, UDRS);
-
-		case FDRESET:
-			return user_reset_fdc(drive, (int)param, 1);
-
-			OUT(FDGETFDCSTAT, UFDCS);
+	}
 
-		case FDWERRORCLR:
-			CLEARSTRUCT(UDRWE);
-			return 0;
-			OUT(FDWERRORGET, UDRWE);
-
-		case FDRAWCMD:
-			if (type)
-				return -EINVAL;
-			LOCK_FDC(drive, 1);
-			set_floppy(drive);
-			CALL(i = raw_cmd_ioctl(cmd, (void __user *)param));
-			process_fd_request();
-			return i;
+	switch (cmd) {
+	case FDEJECT:
+		if (UDRS->fd_ref != 1)
+			/* somebody else has this drive open */
+			return -EBUSY;
+		if (lock_fdc(drive, true))
+			return -EINTR;
 
-		case FDTWADDLE:
-			LOCK_FDC(drive, 1);
-			twaddle();
-			process_fd_request();
-			return 0;
+		/* do the actual eject. Fails on
+		 * non-Sparc architectures */
+		ret = fd_eject(UNIT(drive));
 
-		default:
+		set_bit(FD_DISK_CHANGED_BIT, &UDRS->flags);
+		set_bit(FD_VERIFY_BIT, &UDRS->flags);
+		process_fd_request();
+		return ret;
+	case FDCLRPRM:
+		if (lock_fdc(drive, true))
+			return -EINTR;
+		current_type[drive] = NULL;
+		floppy_sizes[drive] = MAX_DISK_SIZE << 1;
+		UDRS->keep_data = 0;
+		return invalidate_drive(bdev);
+	case FDSETPRM:
+	case FDDEFPRM:
+		return set_geometry(cmd, &inparam.g, drive, type, bdev);
+	case FDGETPRM:
+		ret = get_floppy_geometry(drive, type,
+					  (struct floppy_struct **)&outparam);
+		if (ret)
+			return ret;
+		break;
+	case FDMSGON:
+		UDP->flags |= FTD_MSG;
+		return 0;
+	case FDMSGOFF:
+		UDP->flags &= ~FTD_MSG;
+		return 0;
+	case FDFMTBEG:
+		if (lock_fdc(drive, true))
+			return -EINTR;
+		if (poll_drive(true, FD_RAW_NEED_DISK) == -EINTR)
+			return -EINTR;
+		ret = UDRS->flags;
+		process_fd_request();
+		if (ret & FD_VERIFY)
+			return -ENODEV;
+		if (!(ret & FD_DISK_WRITABLE))
+			return -EROFS;
+		return 0;
+	case FDFMTTRK:
+		if (UDRS->fd_ref != 1)
+			return -EBUSY;
+		return do_format(drive, &inparam.f);
+	case FDFMTEND:
+	case FDFLUSH:
+		if (lock_fdc(drive, true))
+			return -EINTR;
+		return invalidate_drive(bdev);
+	case FDSETEMSGTRESH:
+		UDP->max_errors.reporting = (unsigned short)(param & 0x0f);
+		return 0;
+	case FDGETMAXERRS:
+		outparam = &UDP->max_errors;
+		break;
+	case FDSETMAXERRS:
+		UDP->max_errors = inparam.max_errors;
+		break;
+	case FDGETDRVTYP:
+		outparam = drive_name(type, drive);
+		SUPBOUND(size, strlen((const char *)outparam) + 1);
+		break;
+	case FDSETDRVPRM:
+		*UDP = inparam.dp;
+		break;
+	case FDGETDRVPRM:
+		outparam = UDP;
+		break;
+	case FDPOLLDRVSTAT:
+		if (lock_fdc(drive, true))
+			return -EINTR;
+		if (poll_drive(true, FD_RAW_NEED_DISK) == -EINTR)
+			return -EINTR;
+		process_fd_request();
+		/* fall through */
+	case FDGETDRVSTAT:
+		outparam = UDRS;
+		break;
+	case FDRESET:
+		return user_reset_fdc(drive, (int)param, true);
+	case FDGETFDCSTAT:
+		outparam = UFDCS;
+		break;
+	case FDWERRORCLR:
+		memset(UDRWE, 0, sizeof(*UDRWE));
+		return 0;
+	case FDWERRORGET:
+		outparam = UDRWE;
+		break;
+	case FDRAWCMD:
+		if (type)
 			return -EINVAL;
-		}
+		if (lock_fdc(drive, true))
+			return -EINTR;
+		set_floppy(drive);
+		i = raw_cmd_ioctl(cmd, (void __user *)param);
+		if (i == -EINTR)
+			return -EINTR;
+		process_fd_request();
+		return i;
+	case FDTWADDLE:
+		if (lock_fdc(drive, true))
+			return -EINTR;
+		twaddle();
+		process_fd_request();
+		return 0;
+	default:
+		return -EINVAL;
+	}
 
 	if (_IOC_DIR(cmd) & _IOC_READ)
 		return fd_copyout((void __user *)param, outparam, size);
-	else
-		return 0;
-#undef OUT
-#undef IN
+
+	return 0;
 }
 
 static void __init config_types(void)
 {
-	int first = 1;
+	bool has_drive = false;
 	int drive;
 
 	/* read drive info out of physical CMOS */
@@ -3655,17 +3627,22 @@ static void __init config_types(void)
 			name = temparea;
 		}
 		if (name) {
-			const char *prepend = ",";
-			if (first) {
-				prepend = KERN_INFO "Floppy drive(s):";
-				first = 0;
+			const char *prepend;
+			if (!has_drive) {
+				prepend = "";
+				has_drive = true;
+				pr_info("Floppy drive(s):");
+			} else {
+				prepend = ",";
 			}
-			printk("%s fd%d is %s", prepend, drive, name);
+
+			pr_cont("%s fd%d is %s", prepend, drive, name);
 		}
 		*UDP = *params;
 	}
-	if (!first)
-		printk("\n");
+
+	if (has_drive)
+		pr_cont("\n");
 }
 
 static int floppy_release(struct gendisk *disk, fmode_t mode)
@@ -3705,8 +3682,8 @@ static int floppy_open(struct block_device *bdev, fmode_t mode)
 		goto out2;
 
 	if (!UDRS->fd_ref && (UDP->flags & FD_BROKEN_DCL)) {
-		USETF(FD_DISK_CHANGED);
-		USETF(FD_VERIFY);
+		set_bit(FD_DISK_CHANGED_BIT, &UDRS->flags);
+		set_bit(FD_VERIFY_BIT, &UDRS->flags);
 	}
 
 	if (UDRS->fd_ref == -1 || (UDRS->fd_ref && (mode & FMODE_EXCL)))
@@ -3735,9 +3712,8 @@ static int floppy_open(struct block_device *bdev, fmode_t mode)
 			INFBOUND(try, 16);
 			tmp = (char *)fd_dma_mem_alloc(1024 * try);
 		}
-		if (!tmp && !floppy_track_buffer) {
+		if (!tmp && !floppy_track_buffer)
 			fallback_on_nodma_alloc(&tmp, 2048 * try);
-		}
 		if (!tmp && !floppy_track_buffer) {
 			DPRINT("Unable to allocate DMA memory\n");
 			goto out;
@@ -3767,11 +3743,12 @@ static int floppy_open(struct block_device *bdev, fmode_t mode)
 		if (mode & (FMODE_READ|FMODE_WRITE)) {
 			UDRS->last_checked = 0;
 			check_disk_change(bdev);
-			if (UTESTF(FD_DISK_CHANGED))
+			if (test_bit(FD_DISK_CHANGED_BIT, &UDRS->flags))
 				goto out;
 		}
 		res = -EROFS;
-		if ((mode & FMODE_WRITE) && !(UTESTF(FD_DISK_WRITABLE)))
+		if ((mode & FMODE_WRITE) &&
+		    !test_bit(FD_DISK_WRITABLE_BIT, &UDRS->flags))
 			goto out;
 	}
 	mutex_unlock(&open_lock);
@@ -3795,17 +3772,18 @@ static int check_floppy_change(struct gendisk *disk)
 {
 	int drive = (long)disk->private_data;
 
-	if (UTESTF(FD_DISK_CHANGED) || UTESTF(FD_VERIFY))
+	if (test_bit(FD_DISK_CHANGED_BIT, &UDRS->flags) ||
+	    test_bit(FD_VERIFY_BIT, &UDRS->flags))
 		return 1;
 
 	if (time_after(jiffies, UDRS->last_checked + UDP->checkfreq)) {
-		lock_fdc(drive, 0);
-		poll_drive(0, 0);
+		lock_fdc(drive, false);
+		poll_drive(false, 0);
 		process_fd_request();
 	}
 
-	if (UTESTF(FD_DISK_CHANGED) ||
-	    UTESTF(FD_VERIFY) ||
+	if (test_bit(FD_DISK_CHANGED_BIT, &UDRS->flags) ||
+	    test_bit(FD_VERIFY_BIT, &UDRS->flags) ||
 	    test_bit(drive, &fake_change) ||
 	    (!ITYPE(UDRS->fd_device) && !current_type[drive]))
 		return 1;
@@ -3818,8 +3796,7 @@ static int check_floppy_change(struct gendisk *disk)
  * a disk in the drive, and whether that disk is writable.
  */
 
-static void floppy_rb0_complete(struct bio *bio,
-			       int err)
+static void floppy_rb0_complete(struct bio *bio, int err)
 {
 	complete((struct completion *)bio->bi_private);
 }
@@ -3877,14 +3854,16 @@ static int floppy_revalidate(struct gendisk *disk)
 	int cf;
 	int res = 0;
 
-	if (UTESTF(FD_DISK_CHANGED) ||
-	    UTESTF(FD_VERIFY) || test_bit(drive, &fake_change) || NO_GEOM) {
+	if (test_bit(FD_DISK_CHANGED_BIT, &UDRS->flags) ||
+	    test_bit(FD_VERIFY_BIT, &UDRS->flags) ||
+	    test_bit(drive, &fake_change) || NO_GEOM) {
 		if (usage_count == 0) {
-			printk("VFS: revalidate called on non-open device.\n");
+			pr_info("VFS: revalidate called on non-open device.\n");
 			return -EFAULT;
 		}
-		lock_fdc(drive, 0);
-		cf = UTESTF(FD_DISK_CHANGED) || UTESTF(FD_VERIFY);
+		lock_fdc(drive, false);
+		cf = (test_bit(FD_DISK_CHANGED_BIT, &UDRS->flags) ||
+		      test_bit(FD_VERIFY_BIT, &UDRS->flags));
 		if (!(cf || test_bit(drive, &fake_change) || NO_GEOM)) {
 			process_fd_request();	/*already done by another thread */
 			return 0;
@@ -3894,7 +3873,7 @@ static int floppy_revalidate(struct gendisk *disk)
 		if (buffer_drive == drive)
 			buffer_track = -1;
 		clear_bit(drive, &fake_change);
-		UCLEARF(FD_DISK_CHANGED);
+		clear_bit(FD_DISK_CHANGED_BIT, &UDRS->flags);
 		if (cf)
 			UDRS->generation++;
 		if (NO_GEOM) {
@@ -3902,7 +3881,7 @@ static int floppy_revalidate(struct gendisk *disk)
 			res = __floppy_read_block_0(opened_bdev[drive]);
 		} else {
 			if (cf)
-				poll_drive(0, FD_RAW_NEED_DISK);
+				poll_drive(false, FD_RAW_NEED_DISK);
 			process_fd_request();
 		}
 	}
@@ -3934,21 +3913,21 @@ static char __init get_fdc_version(void)
 	output_byte(FD_DUMPREGS);	/* 82072 and better know DUMPREGS */
 	if (FDCS->reset)
 		return FDC_NONE;
-	if ((r = result()) <= 0x00)
+	r = result();
+	if (r <= 0x00)
 		return FDC_NONE;	/* No FDC present ??? */
 	if ((r == 1) && (reply_buffer[0] == 0x80)) {
-		printk(KERN_INFO "FDC %d is an 8272A\n", fdc);
+		pr_info("FDC %d is an 8272A\n", fdc);
 		return FDC_8272A;	/* 8272a/765 don't know DUMPREGS */
 	}
 	if (r != 10) {
-		printk
-		    ("FDC %d init: DUMPREGS: unexpected return of %d bytes.\n",
-		     fdc, r);
+		pr_info("FDC %d init: DUMPREGS: unexpected return of %d bytes.\n",
+			fdc, r);
 		return FDC_UNKNOWN;
 	}
 
 	if (!fdc_configure()) {
-		printk(KERN_INFO "FDC %d is an 82072\n", fdc);
+		pr_info("FDC %d is an 82072\n", fdc);
 		return FDC_82072;	/* 82072 doesn't know CONFIGURE */
 	}
 
@@ -3956,52 +3935,50 @@ static char __init get_fdc_version(void)
 	if (need_more_output() == MORE_OUTPUT) {
 		output_byte(0);
 	} else {
-		printk(KERN_INFO "FDC %d is an 82072A\n", fdc);
+		pr_info("FDC %d is an 82072A\n", fdc);
 		return FDC_82072A;	/* 82072A as found on Sparcs. */
 	}
 
 	output_byte(FD_UNLOCK);
 	r = result();
 	if ((r == 1) && (reply_buffer[0] == 0x80)) {
-		printk(KERN_INFO "FDC %d is a pre-1991 82077\n", fdc);
-		return FDC_82077_ORIG;	/* Pre-1991 82077, doesn't know 
+		pr_info("FDC %d is a pre-1991 82077\n", fdc);
+		return FDC_82077_ORIG;	/* Pre-1991 82077, doesn't know
 					 * LOCK/UNLOCK */
 	}
 	if ((r != 1) || (reply_buffer[0] != 0x00)) {
-		printk("FDC %d init: UNLOCK: unexpected return of %d bytes.\n",
-		       fdc, r);
+		pr_info("FDC %d init: UNLOCK: unexpected return of %d bytes.\n",
+			fdc, r);
 		return FDC_UNKNOWN;
 	}
 	output_byte(FD_PARTID);
 	r = result();
 	if (r != 1) {
-		printk("FDC %d init: PARTID: unexpected return of %d bytes.\n",
-		       fdc, r);
+		pr_info("FDC %d init: PARTID: unexpected return of %d bytes.\n",
+			fdc, r);
 		return FDC_UNKNOWN;
 	}
 	if (reply_buffer[0] == 0x80) {
-		printk(KERN_INFO "FDC %d is a post-1991 82077\n", fdc);
+		pr_info("FDC %d is a post-1991 82077\n", fdc);
 		return FDC_82077;	/* Revised 82077AA passes all the tests */
 	}
 	switch (reply_buffer[0] >> 5) {
 	case 0x0:
 		/* Either a 82078-1 or a 82078SL running at 5Volt */
-		printk(KERN_INFO "FDC %d is an 82078.\n", fdc);
+		pr_info("FDC %d is an 82078.\n", fdc);
 		return FDC_82078;
 	case 0x1:
-		printk(KERN_INFO "FDC %d is a 44pin 82078\n", fdc);
+		pr_info("FDC %d is a 44pin 82078\n", fdc);
 		return FDC_82078;
 	case 0x2:
-		printk(KERN_INFO "FDC %d is a S82078B\n", fdc);
+		pr_info("FDC %d is a S82078B\n", fdc);
 		return FDC_S82078B;
 	case 0x3:
-		printk(KERN_INFO "FDC %d is a National Semiconductor PC87306\n",
-		       fdc);
+		pr_info("FDC %d is a National Semiconductor PC87306\n", fdc);
 		return FDC_87306;
 	default:
-		printk(KERN_INFO
-		       "FDC %d init: 82078 variant with unknown PARTID=%d.\n",
-		       fdc, reply_buffer[0] >> 5);
+		pr_info("FDC %d init: 82078 variant with unknown PARTID=%d.\n",
+			fdc, reply_buffer[0] >> 5);
 		return FDC_82078_UNKN;
 	}
 }				/* get_fdc_version */
@@ -4113,9 +4090,9 @@ static int __init floppy_setup(char *str)
 				else
 					param = config_params[i].def_param;
 				if (config_params[i].fn)
-					config_params[i].
-					    fn(ints, param,
-					       config_params[i].param2);
+					config_params[i].fn(ints, param,
+							    config_params[i].
+							    param2);
 				if (config_params[i].var) {
 					DPRINT("%s=%d\n", str, param);
 					*config_params[i].var = param;
@@ -4129,8 +4106,8 @@ static int __init floppy_setup(char *str)
 
 		DPRINT("allowed options are:");
 		for (i = 0; i < ARRAY_SIZE(config_params); i++)
-			printk(" %s", config_params[i].name);
-		printk("\n");
+			pr_cont(" %s", config_params[i].name);
+		pr_cont("\n");
 	} else
 		DPRINT("botched floppy option\n");
 	DPRINT("Read Documentation/blockdev/floppy.txt\n");
@@ -4148,7 +4125,8 @@ static ssize_t floppy_cmos_show(struct device *dev,
 	drive = p->id;
 	return sprintf(buf, "%X\n", UDP->cmos);
 }
-DEVICE_ATTR(cmos,S_IRUGO,floppy_cmos_show,NULL);
+
+DEVICE_ATTR(cmos, S_IRUGO, floppy_cmos_show, NULL);
 
 static void floppy_device_release(struct device *dev)
 {
@@ -4160,7 +4138,7 @@ static int floppy_resume(struct device *dev)
 
 	for (fdc = 0; fdc < N_FDC; fdc++)
 		if (FDCS->address != -1)
-			user_reset_fdc(-1, FD_RESET_ALWAYS, 0);
+			user_reset_fdc(-1, FD_RESET_ALWAYS, false);
 
 	return 0;
 }
@@ -4172,8 +4150,8 @@ static const struct dev_pm_ops floppy_pm_ops = {
 
 static struct platform_driver floppy_driver = {
 	.driver = {
-		.name = "floppy",
-		.pm = &floppy_pm_ops,
+		   .name = "floppy",
+		   .pm = &floppy_pm_ops,
 	},
 };
 
@@ -4245,16 +4223,16 @@ static int __init floppy_init(void)
 		else
 			floppy_sizes[i] = MAX_DISK_SIZE << 1;
 
-	reschedule_timeout(MAXTIMEOUT, "floppy init", MAXTIMEOUT);
+	reschedule_timeout(MAXTIMEOUT, "floppy init");
 	config_types();
 
 	for (i = 0; i < N_FDC; i++) {
 		fdc = i;
-		CLEARSTRUCT(FDCS);
+		memset(FDCS, 0, sizeof(*FDCS));
 		FDCS->dtr = -1;
 		FDCS->dor = 0x4;
 #if defined(__sparc__) || defined(__mc68000__)
-		/*sparcs/sun3x don't have a DOR reset which we can fall back on to */
+	/*sparcs/sun3x don't have a DOR reset which we can fall back on to */
 #ifdef __mc68000__
 		if (MACH_IS_SUN3X)
 #endif
@@ -4283,11 +4261,11 @@ static int __init floppy_init(void)
 
 	/* initialise drive state */
 	for (drive = 0; drive < N_DRIVE; drive++) {
-		CLEARSTRUCT(UDRS);
-		CLEARSTRUCT(UDRWE);
-		USETF(FD_DISK_NEWCHANGE);
-		USETF(FD_DISK_CHANGED);
-		USETF(FD_VERIFY);
+		memset(UDRS, 0, sizeof(*UDRS));
+		memset(UDRWE, 0, sizeof(*UDRWE));
+		set_bit(FD_DISK_NEWCHANGE_BIT, &UDRS->flags);
+		set_bit(FD_DISK_CHANGED_BIT, &UDRS->flags);
+		set_bit(FD_VERIFY_BIT, &UDRS->flags);
 		UDRS->fd_device = -1;
 		floppy_track_buffer = NULL;
 		max_buffer_sectors = 0;
@@ -4307,7 +4285,7 @@ static int __init floppy_init(void)
 		if (FDCS->address == -1)
 			continue;
 		FDCS->rawcmd = 2;
-		if (user_reset_fdc(-1, FD_RESET_ALWAYS, 0)) {
+		if (user_reset_fdc(-1, FD_RESET_ALWAYS, false)) {
 			/* free ioports reserved by floppy_grab_irq_and_dma() */
 			floppy_release_regions(fdc);
 			FDCS->address = -1;
@@ -4330,12 +4308,12 @@ static int __init floppy_init(void)
 		 * properly, so force a reset for the standard FDC clones,
 		 * to avoid interrupt garbage.
 		 */
-		user_reset_fdc(-1, FD_RESET_ALWAYS, 0);
+		user_reset_fdc(-1, FD_RESET_ALWAYS, false);
 	}
 	fdc = 0;
 	del_timer(&fd_timeout);
 	current_drive = 0;
-	initialising = 0;
+	initialized = true;
 	if (have_no_fdc) {
 		DPRINT("no floppy controllers found\n");
 		err = have_no_fdc;
@@ -4356,7 +4334,8 @@ static int __init floppy_init(void)
 		if (err)
 			goto out_flush_work;
 
-		err = device_create_file(&floppy_device[drive].dev,&dev_attr_cmos);
+		err = device_create_file(&floppy_device[drive].dev,
+					 &dev_attr_cmos);
 		if (err)
 			goto out_unreg_platform_dev;
 
@@ -4420,8 +4399,10 @@ static int floppy_request_regions(int fdc)
 	const struct io_region *p;
 
 	for (p = io_regions; p < ARRAY_END(io_regions); p++) {
-		if (!request_region(FDCS->address + p->offset, p->size, "floppy")) {
-			DPRINT("Floppy io-port 0x%04lx in use\n", FDCS->address + p->offset);
+		if (!request_region(FDCS->address + p->offset,
+				    p->size, "floppy")) {
+			DPRINT("Floppy io-port 0x%04lx in use\n",
+			       FDCS->address + p->offset);
 			floppy_release_allocated_regions(fdc, p);
 			return -EBUSY;
 		}
@@ -4512,11 +4493,9 @@ cleanup:
 static void floppy_release_irq_and_dma(void)
 {
 	int old_fdc;
-#ifdef FLOPPY_SANITY_CHECK
 #ifndef __sparc__
 	int drive;
 #endif
-#endif
 	long tmpsize;
 	unsigned long tmpaddr;
 	unsigned long flags;
@@ -4547,20 +4526,18 @@ static void floppy_release_irq_and_dma(void)
 		buffer_min = buffer_max = -1;
 		fd_dma_mem_free(tmpaddr, tmpsize);
 	}
-#ifdef FLOPPY_SANITY_CHECK
 #ifndef __sparc__
 	for (drive = 0; drive < N_FDC * 4; drive++)
 		if (timer_pending(motor_off_timer + drive))
-			printk("motor off timer %d still active\n", drive);
+			pr_info("motor off timer %d still active\n", drive);
 #endif
 
 	if (timer_pending(&fd_timeout))
-		printk("floppy timer still active:%s\n", timeout_message);
+		pr_info("floppy timer still active:%s\n", timeout_message);
 	if (timer_pending(&fd_timer))
-		printk("auxiliary floppy timer still active\n");
+		pr_info("auxiliary floppy timer still active\n");
 	if (work_pending(&floppy_work))
-		printk("work still pending\n");
-#endif
+		pr_info("work still pending\n");
 	old_fdc = fdc;
 	for (fdc = 0; fdc < N_FDC; fdc++)
 		if (FDCS->address != -1)
@@ -4577,7 +4554,9 @@ static void __init parse_floppy_cfg_string(char *cfg)
 	char *ptr;
 
 	while (*cfg) {
-		for (ptr = cfg; *cfg && *cfg != ' ' && *cfg != '\t'; cfg++) ;
+		ptr = cfg;
+		while (*cfg && *cfg != ' ' && *cfg != '\t')
+			cfg++;
 		if (*cfg) {
 			*cfg = '\0';
 			cfg++;
@@ -4625,6 +4604,7 @@ static void __exit floppy_module_exit(void)
 	/* eject disk, if any */
 	fd_eject(0);
 }
+
 module_exit(floppy_module_exit);
 
 module_param(floppy, charp, 0);
@@ -4636,9 +4616,10 @@ MODULE_LICENSE("GPL");
 
 /* This doesn't actually get used other than for module information */
 static const struct pnp_device_id floppy_pnpids[] = {
-	{ "PNP0700", 0 },
-	{ }
+	{"PNP0700", 0},
+	{}
 };
+
 MODULE_DEVICE_TABLE(pnp, floppy_pnpids);
 
 #else
diff --git a/drivers/block/osdblk.c b/drivers/block/osdblk.c
index a808b1530b3b..eb2091aa1c19 100644
--- a/drivers/block/osdblk.c
+++ b/drivers/block/osdblk.c
@@ -476,7 +476,9 @@ static void class_osdblk_release(struct class *cls)
 	kfree(cls);
 }
 
-static ssize_t class_osdblk_list(struct class *c, char *data)
+static ssize_t class_osdblk_list(struct class *c,
+				struct class_attribute *attr,
+				char *data)
 {
 	int n = 0;
 	struct list_head *tmp;
@@ -500,7 +502,9 @@ static ssize_t class_osdblk_list(struct class *c, char *data)
 	return n;
 }
 
-static ssize_t class_osdblk_add(struct class *c, const char *buf, size_t count)
+static ssize_t class_osdblk_add(struct class *c,
+				struct class_attribute *attr,
+				const char *buf, size_t count)
 {
 	struct osdblk_device *osdev;
 	ssize_t rc;
@@ -592,7 +596,9 @@ err_out_mod:
 	return rc;
 }
 
-static ssize_t class_osdblk_remove(struct class *c, const char *buf,
+static ssize_t class_osdblk_remove(struct class *c,
+					struct class_attribute *attr,
+					const char *buf,
 					size_t count)
 {
 	struct osdblk_device *osdev = NULL;
diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c
index b72935b8f203..39c8514442eb 100644
--- a/drivers/block/pktcdvd.c
+++ b/drivers/block/pktcdvd.c
@@ -284,7 +284,7 @@ static ssize_t kobj_pkt_store(struct kobject *kobj,
 	return len;
 }
 
-static struct sysfs_ops kobj_pkt_ops = {
+static const struct sysfs_ops kobj_pkt_ops = {
 	.show = kobj_pkt_show,
 	.store = kobj_pkt_store
 };
@@ -337,7 +337,9 @@ static void class_pktcdvd_release(struct class *cls)
 {
 	kfree(cls);
 }
-static ssize_t class_pktcdvd_show_map(struct class *c, char *data)
+static ssize_t class_pktcdvd_show_map(struct class *c,
+					struct class_attribute *attr,
+					char *data)
 {
 	int n = 0;
 	int idx;
@@ -356,7 +358,9 @@ static ssize_t class_pktcdvd_show_map(struct class *c, char *data)
 	return n;
 }
 
-static ssize_t class_pktcdvd_store_add(struct class *c, const char *buf,
+static ssize_t class_pktcdvd_store_add(struct class *c,
+					struct class_attribute *attr,
+					const char *buf,
 					size_t count)
 {
 	unsigned int major, minor;
@@ -376,7 +380,9 @@ static ssize_t class_pktcdvd_store_add(struct class *c, const char *buf,
 	return -EINVAL;
 }
 
-static ssize_t class_pktcdvd_store_remove(struct class *c, const char *buf,
+static ssize_t class_pktcdvd_store_remove(struct class *c,
+					  struct class_attribute *attr,
+					  const char *buf,
 					size_t count)
 {
 	unsigned int major, minor;
diff --git a/drivers/char/ChangeLog b/drivers/char/ChangeLog
deleted file mode 100644
index 56b8a2e76ab1..000000000000
--- a/drivers/char/ChangeLog
+++ /dev/null
@@ -1,775 +0,0 @@
-2001-08-11  Tim Waugh  <twaugh@redhat.com>
-
-	* serial.c (get_pci_port): Deal with awkward Titan cards.
-
-1998-08-26  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* serial.c (rs_open): Correctly decrement the module in-use count
-		on errors.
-
-Thu Feb 19 14:24:08 1998  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* tty_io.c (tty_name): Remove the non-reentrant (and non-SMP safe)
-		version of tty_name, and rename the reentrant _tty_name
-		function to be tty_name.
-		(tty_open): Add a warning message stating callout devices
-		are deprecated.
-
-Mon Dec  1 08:24:15 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* tty_io.c (tty_get_baud_rate): Print a warning syslog if the
-		tty->alt_speed kludge is used; this means the system is
-		using the deprecated SPD_HI ioctls.
-
-Mon Nov 24 10:37:49 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* serial.c, esp.c, rocket.c: Change drivers to take advantage of
-	 	tty_get_baud_rate().
-	
-	* tty_io.c (tty_get_baud_rate): New function which computes the
-		correct baud rate for the tty.  More factoring out of
-		common code out of the serial driver to the high-level tty
-		functions....
-
-Sat Nov 22 07:53:36 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* serial.c, esp.c, rocket.c: Add tty->driver.break() routine, and
- 		allow high-level tty code to handle the break and soft
- 		carrier ioctls.
-	
-	* tty_ioctl.c (n_tty_ioctl): Support TIOCGSOFTCAR and
- 		TIOCSSOFTCAR, so that device drivers don't have to support
- 		it.
-
-	* serial.c (autoconfig): Change 16750 test to hopefully eliminate
-		false results by people with strange 16550As being
-		detected as 16750s.  Hopefully 16750s will still be
-		detected as 16750, and other weird UARTs won't get poorly
-		autodetected.  If this doesn't work, I'll have to disable
-		the auto identification for the 16750.
-
-	* tty_io.c (tty_hangup): Now actually do the tty hangup
-		processing during the timer processing, and disable
-		interrupts while doing the hangup processing.  This avoids
-		several nasty race conditions which happened when the
-		hangup processing was done asynchronously.
-		(tty_ioctl): Do break handling in the tty driver if
-		driver's break function is supported.  
-		(tty_flip_buffer_push): New exported function which should
-		be used by drivers to push characters in the flip buffer
-		to the tty handler.  This may either be done using a task
-		queue function for better CPU efficiency, or directly for
-		low latency operation.
-
-	* serial.c (rs_set_termios): Fix bug rs_set_termios when
-		transitioning away from B0, submitted by Stanislav
-		Voronyi. 
-
-Thu Jun 19 20:05:58 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* serial.c (begin_break, end_break, rs_ioctl): Applied patch
-		to support BSD ioctls to set and clear the break
-		condition explicitly.
-
-	* console.c (scrup, scrdown, insert_line, delete_line): Applied
-		fix suggested by Aaron Tiensivu to speed up block scrolls
-		up and down.
-
-	* n_tty.c (opost_block, write_chan): Added a modified "fast
- 		console" patch which processes a block of text via
-		"cooking" efficiently.
-
-Wed Jun 18 15:25:50 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* tty_io.c (init_dev, release_dev): Applied fix suggested by Bill
-		Hawes to prevent race conditions in the tty code.
-
-	* n_tty.c (n_tty_chars_in_buffer): Applied fix suggested by Bill
-		Hawes so that n_tty_chars_in_buffer returns the correct
-		value in the case when the tty is in cannonical mode.  (To
-		avoid a pty deadlock with telnetd.)
-
-Thu Feb 27 01:53:08 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* serial.c (change_speed): Add support for the termios flag
-		CMSPAR, which allows the user to select stick parity.
-		(i.e, if PARODD is set, the parity bit is always 1; if
-		PARRODD is not set, then the parity bit is always 0).
-
-Wed Feb 26 19:03:10 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* serial.c (cleanup_module): Fix memory leak when using the serial
-		driver as a module; make sure tmp_buf gets freed!
-
-Tue Feb 25 11:01:59 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* serial.c (set_modem_info): Add support for setting and clearing
-		the OUT1 and OUT2 bits.  (For special case UART's, usually
-		for half-duplex.)
-		(autoconfig, change_speed): Fix TI 16750 support.
-
-Sun Feb 16 00:14:43 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* tty_io.c (release_dev): Add sanity check to make sure there are
-		no waiters on tty->read_wait or tty->write_wait.
-
-	* serial.c (rs_init): Don't autoconfig a device if the I/O region
-		is already reserved.
-
-	* serial.c (serial_proc_info): Add support for /proc/serial.
-
-Thu Feb 13 00:49:10 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* serial.c (receive_chars): When the UART repotrs an overrun
- 		condition, it does so with a valid character.  Changed to
- 		not throw away the valid character, but instead report the
-		overrun after the valid character.
-
-	* serial.c: Added new #ifdef's for some of the advanced serial
-		driver features.  A minimal driver that only supports COM
-		1/2/3/4 without sharing serial interrupts only takes 17k;
-		the full driver takes 32k.
-		
-Wed Feb 12 14:50:44 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* vt.c:
-	* pty.c: 
-	* tty_ioctl.c: 
-	* serial.c: Update routines to use the new 2.1 memory access
-	 	routines.
-
-Wed Dec  4 07:51:52 1996  Theodore Ts'o  <tytso@localhost.mit.edu>
-
-	* serial.c (change_speed): Use save_flags(); cli() and
-		restore_flags() in order to ensure we don't accidentally
-		turn on interrupts when starting up the port.
-		(startup): Move the insertion of serial structure into the
-		IRQ chain earlier into the startup processing.  Interrupts
-		should be off this whole time, but we eventually will want
-		to reduce this window.
-
-Thu Nov 21 10:05:22 1996  Theodore Ts'o  <tytso@localhost.mit.edu>
-
-	* tty_ioctl.c (tty_wait_until_sent): Always check the driver
- 		wait_until_ready routine, even if there are no characters
- 		in the xmit buffer.  (There may be charactes in the device
- 		FIFO.)
-		(n_tty_ioctl): Add new flag tty->flow_stopped which
- 		indicates whether the tty is stopped due to a request by
- 		the TCXONC ioctl (used by tcflow).  If so, don't let an
- 		incoming XOFF character restart the tty.  The tty can only
- 		be restarted by another TCXONC request.
-
-	* tty_io.c (start_tty): Don't allow the tty to be restarted if
-		tty->flow_stopped is true.
-
-	* n_tty.c (n_tty_receive_char): If tty->flow_stopped is true, and
- 		IXANY is set, don't eat a character trying to restart the
- 		tty.
-
-	* serial.c (startup): Remove need for MCR_noint from the
- 		async_struct structure.  Only turn on DTR and RTS if the
- 		baud rate is not zero.
-		(change_speed): More accurately calculate the timeout
- 		value based on the word size.  Move responsibility of
- 		hangup when speed becomes B0 to rs_set_termios()
-		(set_serial_info): When changing the UART type set the
- 		current xmit_fifo_size as well as the permanent
- 		xmit_fifo_size.
-		(rs_ioctl): Fix TCSBRK (used by tcdrain) and TCSBRKP
- 		ioctls to return EINTR if interrupted by a signal.
-		(rs_set_termios): If the baud rate changes to or from B0,
- 		this function is now responsible for setting or clearing
- 		DTR and RTS.  DTR and RTS are only be changed on the
- 		transition to or from the B0 state.
-		(rs_close): Wait for the characters to drain based on
- 		info->timeout.  At low baud rates (50 bps), it may take a
- 		long time for the FIFO to completely drain out!
-		(rs_wait_until_sent): Fixed timeout handling.  Now
- 		releases control to the scheduler, but checks frequently
- 		enough so that the function is sensitive enough to pass
- 		the timing requirements of the NIST-PCTS.
-		(block_til_ready): When opening the device, don't turn on
- 		DTR and RTS if the baud rate is B0.
-
-Thu Nov 14 00:06:09 1996  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* serial.c (autoconfig): Fix autoconfiguration problems;
-		info->flags wasn't getting initialized from the state
-		structure.  Put in more paranoid test for the 16750.
-
-Fri Nov  8 20:19:50 1996  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* n_tty.c (n_tty_flush_buffer): Only call driver->unthrottle() if
- 		the tty was previous throttled.
-		(n_tty_set_termios, write_chan): Add changes suggested by
- 			Simon P. Allen to allow hardware cooking.
-
-	* tty_ioctl.c (set_termios): If we get a signal while waiting for
-		the tty to drain, return -EINTR.
-	
-	* serial.c (change_speed): Add support for CREAD, as required by
-	 	POSIX.
-
-Sat Nov  2 20:43:10 1996  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* serial.c: Wholesale changes.  Added support for the Startech
- 		16650 and 16650V2 chips.  (WARNING: the new startech
- 		16650A may or may not work!)  Added support for the
- 		TI16750 (not yet tested).  Split async_struct into a
- 		transient part (async_struct) and a permanent part
-		(serial_state) which contains the configuration
- 		information for the ports.  Added new driver routines
- 		wait_until_sent() and send_xchar() to help with POSIX
- 		compliance.  Added support for radio clocks which waggle
-		the carrier detect line (CONFIG_HARD_PPS).
-	
-	* tty_ioctl.c (tty_wait_until_sent): Added call to new driver
-		function tty->driver.wait_until_sent(), which returns when
-		the tty's device xmit buffers are drained.  Needed for
-		full POSIX compliance.
-
-		(send_prio_char): New function, called by the ioctl's
-		TCIOFF and TCION; uses the new driver call send_xchar(),
-		which will send the XON or XOFF character at high priority
-		(and even if tty output is stopped).
-
-Wed Jun  5 18:52:04 1996  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* pty.c (pty_close): When closing a pty, make sure packet mode is
-	 	cleared.
-
-Sun May 26 09:33:52 1996  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* vesa_blank.c (set_vesa_blanking): Add missing verify_area() call.
-
-	* selection.c (set_selection): Add missing verify_area() call.
-
-	* tty_io.c (tty_ioctl): Add missing verify_area() calls.
-
-	* serial.c (rs_ioctl): Add missing verify_area() calls.
-		(rs_init): Allow initialization of serial driver
-		configuration from a module.
-
-	* random.c (extract_entropy): Add missing verify_area call.
-		Don't limit number of characters returned to
-		32,768. Extract entropy is now no longer a inlined
-		function.
-
-		(random_read): Check return value in case extract_entropy
-		returns an error.
-
-		(secure_tcp_sequence_number): New function which returns a
-		secure TCP sequence number.  This is needed to prevent some
-		nasty TCP hijacking attacks.
-	
-		(init_std_data): Initialize using gettimeofday() instead of
-		struct timeval xtime.
-
-		(fast_add_entropy_word, add_entropy_word): Rename the
-		inline function add_entropy_word() to
-		fast_add_entropy_word().  Make add_entropy_word() be the
-		non-inlined function which is used in non-timing critical
-		places, in order to save space.
-
-		(initialize_benchmark, begin_benchmark, end_benchmark): New
-		functions defined when RANDOM_BENCHMARK is defined.  They
-		allow us to benchmark the speed of the
-		add_timer_randomness() call.
-
-		(int_ln, rotate_left): Add two new inline functions with
-		i386 optimized asm instructions.  This speeds up the
-		critical add_entropy_word() and add_timer_randomness()
-		functions, which are called from interrupt handlers.
-
-Tue May  7 22:51:11 1996    <tytso@rsts-11.mit.edu>
-
-	* random.c (add_timer_randomness): Limit the amount randomness
-		that we estimate to 12 bits.  (An arbitrary amount).
-
-		(extract_entropy): To make it harder to analyze the hash
-		function, fold the hash function in half using XOR, and
-		use the folded result as the value to emit to the user.
-		Also, add timer randomness each pass through the
-		exact_entropy call, to increase the amount of unknown
-		values during the extraction process.
-
-		(random_ioctl): Use IOR/IOW definitions to define the
-		ioctl values used by the /dev/random driver.  Allow the
-		old ioctl values to be used for backwards compatibility
-		(for a limited amount of time).
-
-Wed Apr 24 14:02:04 1996  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* random.c (add_timer_randomness): Use 2nd derivative as well to
-		better estimate entropy.
-
-		(rand_initialize): Explicitly initialize all the pointers
-		to NULL.  (Clearing pointers using memset isn't portable.)
-		Initialize the random pool with OS-dependent data.
-
-		(random_write): Add sanity checking to the arguments to
-		random_write(), so that bad arguments won't cause a kernel
-		SEGV. 
-
-		(random_read): Update the access time of the device inode
-		when you return data to the user.
-
-		(random_ioctl): Wake up the random_wait channel when there
-		are only WAIT_INPUT_BITS available.  Add more paranoia
-		checks to make sure entropy_count doesn't go beyond the
-		bounds of (0, POOLSIZE).  Add a few missing verify_area
-		checks.  Add support for the RNDCLEARPOOL ioctl, which
-		zaps the random pool.
-
-		(add_timer_randomness): Wake up the random_wait
-		channel only when there are WAIT_INPUT_BITS available.
-
-		(random_select): Allow a random refresh daemon process to
-		select on /dev/random for writing; wake up the daemon when
-		there are less than WAIT_OUTPUT_BITS bits of randomness
-		available.
-
-Tue Apr 23 22:56:07 1996    <tytso@rsts-11.mit.edu>
-
-	* tty_io.c (init_dev): Change return code when user attempts to
-		open master pty which is already open from EAGAIN to EIO,
-		to match with BSD expectations.  EIO is more correct
-		anyway, since EAGAIN implies that retrying will be
-		successful --- which it might be.... Eventually!!
-
-	* pty.c (pty_open, pty_close): Fix wait loop so that we don't
-		busy loop while waiting for the master side to open.
-		Fix tty opening/closing logic.  TTY_SLAVE_CLOSED was
-		renamed to TTY_OTHER_CLOSED, so that the name is more
-		descriptive.  Also fixed code so that the tty flag
-		actually works correctly now....
-
-Mon Apr  1 10:22:01 1996    <tytso@rsts-11.mit.edu>
-
-	* serial.c (rs_close): Cleaned up modularization changes.
-		Remove code which forced line discipline back to N_TTY
-		this is done in the tty upper layers, and there's no
-		reason to do it here.  (Making this change also
-		removed the requirement that the serial module access
-		the internal kernel symbol "ldiscs".)
-
-	* tty_io.c (tty_init): Formally register a tty_driver entry for
-		/dev/tty (device 4, 0) and /dev/console (device 5, 0).
-		This guarantees that major device numbers 4 and 5 will be
-		reserved for the tty subsystem (as they have to be because
-		of /dev/tty and /dev/console).  Removed tty_regdev, as
-		this interface is no longer necessary.
-
-Sun Mar 17 20:42:47 GMT 1996 <ah@doc.ic.ac.uk>
-
-	* serial.c : modularisation (changes in linux/fs/device.c allow
-		kerneld to automatically load the serial module).
-
-	* Makefile, Config.in : serial modularisation adds.
-
-	* tty_io.c : tty_init_ctty used by to register "cua" driver just
-		for the /dev/tty device (5,0).  Added tty_regdev.
-	
-	* serial.c (shutdown, rs_ioctl) : when port shuts down wakeup processes
-	  waiting on delta_msr_wait. The TIOCMIWAIT ioctl returns EIO
-	  if no change was done since the time of call.
-
-Sat Mar 16 14:33:13 1996 <aeb@cwi.nl>
-
-	* tty_io.c (disassociate_ctty): If disassociate_ctty is called by
-		exit, do not perform an implicit vhangup on a pty.
-
-Fri Feb  9 14:15:47 1996    <tytso@rsts-11.mit.edu>
-
-	* serial.c (block_til_ready): Fixed another race condition which
-		happens if a hangup happens during the open.
-
-Wed Jan 10 10:08:00 1996    <tytso@rsts-11.mit.edu>
-
-	* serial.c (block_til_ready): Remove race condition which happened
-		if a hangup condition happened during the setup of the
-		UART, before rs_open() called block_til_ready().  This
-		caused the info->count counter to be erroneously
-		decremented.
-
-	* serial.c (startup, rs_open): Remove race condition that could
-		cause a memory leak of one page.  (Fortunately, both race
-		conditions were relatively rare in practice.)
-
-Tue Dec  5 13:21:27 1995    <tytso@rsts-11.mit.edu>
-
-	* serial.c (check_modem_status, rs_ioctl): Support the new
-		ioctl()'s TIOCGICOUNT, TIOCMIWAIT.  These allow an
-		application program to wait on a modem serial register
-		status bit change, and to find out how many changes have
-		taken place for the MSR bits.
-
-		(rs_write): Eliminate a race condition which is introduced
-		if it is necessary to wait for the semaphore.
-
-Sat Nov  4 17:14:45 1995    <tytso@rsts-11.mit.edu>
-
-	* tty_io.c (tty_init): Move registration of TTY_MAJOR and
-		TTY_AUX_MAJOR to the end, so that /proc/devices looks
-		prettier. 
-
-	* pty.c (pty_init): Use new major numbers for PTY master and slave
-		devices.  This allow us to have more than 64 pty's.  We
-		register the old pty devices for backwards compatibility.
-		Note that a system should either be using the old pty
-		devices or the new pty devices --- in general, it should
-		try to use both, since they map into the same pty table.
-		The old pty devices are strictly for backwards compatibility.
-
-Wed Oct 11 12:45:24 1995    <tytso@rsts-11.mit.edu>
-
-	* tty_io.c (disassociate_ctty): If disassociate_ctty is called by
-		exit, perform an implicit vhangup on the tty.
-
-	* pty.c (pty_close): When the master pty is closed, send a hangup
-		to the slave pty.
-		(pty_open): Use the flag TTY_SLAVE_CLOSED to test to see
-		if there are any open slave ptys, instead of using
-		tty->link->count.  The old method got confused if there
-		were processes that had hung-up file descriptors on the
-		slave tty.
-
-Tue May  2 00:53:25 1995    <tytso@rsx-11.mit.edu>
-
-	* tty_io.c (tty_set_ldisc): Wait until the output buffer is
-		drained before closing the old line discipline --- needed
-		in only one case: XON/XOFF processing.
-
-	* n_tty.c (n_tty_close): Don't bother waiting until the output
-		driver is closed; in general, the line discipline
-		shouldn't care if the hardware is finished
-		transmitting before the line discipline terminates.
-
-	* tty_io.c (release_dev): Shutdown the line discipline after
-		decrementing the tty count variable; but set the
-		TTY_CLOSING flag so that we know that this tty structure
-		isn't long for this world.
-
-	* tty_io.c (init_dev): Add sanity code to check to see if
-		TTY_CLOSING is set on a tty structure; if so, something
-		bad has happened (probably a line discipline close blocked
-		when it shouldn't have; so do a kernel printk and then
-		return an error).
-
-Wed Apr 26 10:23:44 1995  Theodore Y. Ts'o  <tytso@localhost>
-
-	* tty_io.c (release_dev): Try to shutdown the line discipline
-		*before* decrementing the tty count variable; this removes
-		a potential race condition which occurs when the line
-		discipline close blocks, and another process then tries
-		open the same serial port.
-
-	* serial.c (rs_hangup): When hanging up, flush the output buffer
-		before shutting down the UART.  Otherwise the line
-		discipline close blocks waiting for the characters to get
-		flushed, which never happens until the serial port gets reused.
-
-Wed Apr 12 08:06:16 1995  Theodore Y. Ts'o  <tytso@localhost>
-
-	* serial.c (do_serial_hangup, do_softint, check_modem_status,
-		rs_init):  Hangups are now scheduled via a separate tqueue
-		structure in the async_struct structure, tqueue_hangup.
-		This task is pushed on to the tq_schedule queue, so that
-		it is processed synchronously by the scheduler.
-
-Sat Feb 18 12:13:51 1995  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* tty_io.c (disassociate_ctty, tty_open, tty_ioctl): Clear
-		current->tty_old_pgrp field when a session leader
-		acquires a controlling tty, and after a session leader
-		has disassociated from a controlling tty.
-
-Fri Feb 17 09:34:09 1995  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* serial.c (rs_interrupt_single, rs_interrupt, rs_interrupt_multi): 
-		Change the number of passes made from 64 to be 256,
-		configurable with the #define RS_ISR_PASS_LIMIT.
-
-	* serial.c (rs_init, set_serial_info, get_serial_info, rs_close):
-		Remove support for closing_wait2.  Instead, set
-		tty->closing and rely on the line discipline to prevent
-		echo wars.
-
-	* n_tty.c (n_tty_receive_char):  IEXTEN does not need to be
-		enabled in order for IXANY to be active.
-
-		If tty->closing is set, then only process XON and XOFF
-                characters.
-
-Sun Feb 12 23:57:48 1995  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* serial.c (rs_timer): Change the interrupt poll time from 60
-		seconds to 10 seconds, configurable with the #define
-		RS_STROBE_TIME.
-
-	* serial.c (rs_interrupt_multi, startup, shutdown, rs_ioctl,
-		set_multiport_struct, get_multiport_struct): Add
-		provisions for a new type of interrupt service routine,
-		which better supports multiple serial ports on a single
-		IRQ.  
-
-Sun Feb  5 19:35:11 1995  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* tty_ioctl.c (n_tty_ioctl, set_termios, tty_wait_until_sent): 
-	* serial.c (rs_ioctl, rs_close): 
-	* cyclades.c (cy_ioctl, cy_close): 
-	* n_tty.c (n_tty_close):  Rename wait_until_sent to
-		tty_wait_until_sent, so that it's a better name to export
-		in ksyms.c.
-
-Sat Feb  4 23:36:20 1995  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* serial.c (rs_close): Added missing check for closing_wait2 being
-		ASYNC_CLOSING_WAIT_NONE.
-
-Thu Jan 26 09:02:49 1995  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* serial.c (rs_init, set_serial_info, get_serial_info,
-		rs_close): Support close_wait in the serial driver.
-		This is helpful for slow devices (like serial
-		plotters) so that their outputs don't get flushed upon
-		device close.  This has to be configurable because
-		normally we don't want ports to be hung up for long
-		periods of time during a close when they are not
-		connected to a device, or the device is powered off.
-
-		The default is to wait 30 seconds; in the case of a
-		very slow device, the close_wait timeout should be
-		lengthened.  If it is set to 0, the kernel will wait
-		forever for all of the data to be transmitted.
-
-Thu Jan 17 01:17:20 1995  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* serial.c (startup, change_speed, rs_init): Add support to detect
-		the StarTech 16650 chip.  Treat it as a 16450 for now,
-		because of its FIFO bugs.
-
-Thu Jan  5 21:21:57 1995  <dahinds@users.sourceforge.net>
-
-	* serial.c: (receive_char): Added counter to prevent infinite loop
-		when a PCMCIA serial device is ejected.
-
-Thu Dec 29 17:53:48 1994    <tytso@rsx-11.mit.edu>
-
-	* tty_io.c (check_tty_count): New procedure which checks
-		tty->count to make sure that it matches with the number of
-		open file descriptors which point at the structure.  If
-		the number doesn't match, it prints a warning message.
-
-Wed Dec 28 15:41:51 1994    <tytso@rsx-11.mit.edu>
-
-	* tty_io.c (do_tty_hangup, disassociate_ctty): At hangup time,
-		save the tty's current foreground process group in the
-		session leader's task structure.  When the session leader
-		terminates, send a SIGHUP, SIGCONT to that process group.
-		This is not required by POSIX, but it's not prohibited
-		either, and it appears to be the least intrusive way
-		to fix a problem that dialup servers have with
-		orphaned process groups caused by modem hangups.
-
-Thu Dec  8 14:52:11 1994    <tytso@rsx-11.mit.edu>
-
-	* serial.c (rs_ioctl): Don't allow most ioctl's if the serial port
-		isn't initialized.
-
-	* serial.c (rs_close): Don't clear the IER if the serial port
-		isn't initialized. 
-
-	* serial.c (block_til_ready): Don't try to block on the dialin
-		port if the serial port isn't initialized.
-
-Wed Dec  7 10:48:30 1994  Si Park (si@wimpol.demon.co.uk)
-	* tty_io.c (tty_register_driver): Fix bug when linking onto
-		the tty_drivers list. We now test that there are elements
-		already on the list before setting the back link from the
-		first element to the new driver.
-
-	* tty_io.c (tty_unregister_driver): Fix bug in unlinking the
-		specified driver from the tty_drivers list. We were not
-		setting the back link correctly. This used to result in
-		a dangling back link pointer and cause panics on the next
-		call to get_tty_driver().
-
-Tue Nov 29 10:21:09 1994  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* tty_io.c (tty_unregister_driver): Fix bug in
-		tty_unregister_driver where the pointer to the refcount is
-		tested, instead of the refcount itself.  This caused
-		tty_unregister_driver to always return EBUSY.
-
-Sat Nov 26 11:59:24 1994  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* tty_io.c (tty_ioctl): Add support for the new ioctl
-		TIOCTTYGSTRUCT, which allow a kernel debugging program
-		direct read access to the tty and tty_driver structures.
-
-Fri Nov 25 17:26:22 1994  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* serial.c (rs_set_termios): Don't wake up processes blocked in
-		open when the CLOCAL flag changes, since a blocking
-		open only samples the CLOCAL flag once when it blocks,
-		and doesn't check it again.  (n.b.  FreeBSD has a
-		different behavior for blocking opens; it's not clear
-		whether Linux or FreeBSD's interpretation is correct.
-		POSIX doesn't give clear guidance on this issue, so
-		this may change in the future....)
-
-	* serial.c (block_til_ready): Use the correct termios structure to
-		check the CLOCAL flag.  If the cuaXX device is active,
-		then check the saved termios for the ttySXX device.
-		Otherwise, use the currently active termios structure.
-
-Sun Nov  6 21:05:44 1994  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* serial.c (change_speed): Add support for direct access of
-		57,600 and 115,200 bps.
-
-Wed Nov  2 10:32:36 1994  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* n_tty.c (n_tty_receive_room): Only allow excess characters
-		through if we are in ICANON mode *and* there are other no
-		pending lines in the buffer.  Otherwise cut and paste over
-		4k breaks.
-
-Sat Oct 29 18:17:34 1994  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* serial.c (rs_ioctl, get_lsr_info): Added patch suggested by Arne
-		Riiber so that user mode programs can tell when the
-		transmitter shift register is empty.
-
-Thu Oct 27 23:14:29 1994  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* tty_ioctl.c (wait_until_sent): Added debugging printk statements
-		(under the #ifdef TTY_DEBUG_WAIT_UNTIL_SENT)  
-
-	* serial.c (rs_interrupt, rs_interrupt_single, receive_chars,
-		change_speed, rs_close): rs_close now disables receiver
-		interrupts when closing the serial port.  This allows the
-		serial port to close quickly when Linux and a modem (or a
-		mouse) are engaged in an echo war; when closing the serial
-		port, we now first stop listening to incoming characters,
-		and *then* wait for the transmit buffer to drain.  
-
-		In order to make this change, the info->read_status_mask
-		is now used to control what bits of the line status
-		register are looked at in the interrupt routine in all
-		cases; previously it was only used in receive_chars to
-		select a few of the status bits.
-
-Mon Oct 24 23:36:21 1994  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* serial.c (rs_close): Add a timeout to the transmitter flush
-		loop; this is just a sanity check in case we have flaky
-		(or non-existent-but-configured-by-the-user) hardware.
-
-Fri Oct 21 09:37:23 1994  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* tty_io.c (tty_fasync): When asynchronous I/O is enabled, if the
-		process or process group has not be specified yet, set it
-		to be the tty's process group, or if that is not yet set,
-		to the current process's pid.
-
-Thu Oct 20 23:17:28 1994  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* n_tty.c (n_tty_receive_room): If we are doing input
-		canonicalization, let as many characters through as
-		possible, so that the excess characters can be "beeped".
-
-Tue Oct 18 10:02:43 1994  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* serial.c (rs_start): Removed an incorrect '!' that was
-		preventing transmit interrupts from being re-enabled in
-		rs_start().  Fortunately in most cases it would be
-		re-enabled elsewhere, but this still should be fixed
-		correctly.
-
-Sun Oct  9 23:46:03 1994  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* tty_io.c (do_tty_hangup): If the tty driver flags
-		TTY_DRIVER_RESET_TERMIOS is set, then reset the termios
-		settings back to the driver's initial configuration.  This
-		allows the termios settings to be reset even if a process
-		has hung up file descriptors keeping a pty's termios from
-		being freed and reset.
-
-	* tty_io.c (release_dev): Fix memory leak.  The pty's other
-		termios structure should also be freed.
-
-	* serial.c (rs_close, shutdown): Change how we wait for the
-		transmitter to completely drain before shutting down the
-		serial port.  We now do it by scheduling in another
-		process instead of busy looping with the interrupts turned
-		on.  This may eliminate some race condition problems that
-		some people seem to be reporting.
-
-Sun Sep 25 14:18:14 1994  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* tty_io.c (release_dev): When freeing a tty make sure that both
-		the tty and the o_tty (if present) aren't a process's
-		controlling tty.  (Previously, we only checked the tty.)
-
-	* serial.c (change_speed): Only enable the Modem Status
-		Interrupt for a port if CLOCAL is not set or CRTSCTS
-		is set.  If we're not checking the carrier detect and
-		CTS line, there's no point in enabling the modem
-		status interrupt.  This will save spurious interrupts
-		from slowing down systems who have terminals that
-		don't support either line.  (Of course, if you want
-		only one of CD and CTS support, you will need a
-		properly wired serial cable.)
-
-Thu Sep 22 08:32:48 1994  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* tty_io.c (do_SAK): Return if tty is null.
-
-	* tty_io.c (_tty_name): Return "NULL tty" if the passed in tty is
-		NULL.
-
-Sat Sep 17 13:19:25 1994  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* tty_ioctl.c (n_tty_ioctl): Fix TIOCGLCKTRMIOS and
-		TIOCSLCKTRMIOS, which were totally broken.  Remove
-		extra indirection from argument; it should be a struct
-		termios *, not a struct termios **.
-		&real_tty->termios_locked should have been
-		real_tty->termios_locked.  This caused us to be
-		reading and writing the termios_locked structure to
-		random places in kernel memory.  
-
-	* tty_io.c (release_dev): Oops!  Forgot to delete a critical kfree
-		of the locked_termios.  This leaves the locked_termios
-		structure pointed at a freed object.  
-
-Fri Sep 16 08:13:25 1994  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* tty_io.c (tty_open): Don't check for an exclusive open until
-		after the device specific open routine has been called.
-		Otherwise, the serial device ref counting will be screwed
-		up.
-
-	* serial.c (rs_open, block_til_ready): Don't set termios structure
-		until after block_til_ready has returned successfully.
-		Modify block_til_ready to check the normal_termios
-		structure directly, so it doesn't rely on termios being
-		set before it's called.
-
-Thu Sep 15 23:34:01 1994  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* serial.c (rs_close): Turn off interrupts during rs_close() to
-		prevent a race condition with the hangup code (which
-		runs during a software interrupt).
-
-	* tty_io.c (release_dev): Don't free the locked_termios structure;
-		its state must be retained across device opens.
-
-
-	* tty_io.c (tty_unregister_driver): Added function to unregister a
-		tty driver.  (For loadable device drivers.)
-
-
diff --git a/drivers/char/agp/Kconfig b/drivers/char/agp/Kconfig
index 2fb3a480f6b0..4b66c69eaf57 100644
--- a/drivers/char/agp/Kconfig
+++ b/drivers/char/agp/Kconfig
@@ -57,7 +57,7 @@ config AGP_AMD
 
 config AGP_AMD64
 	tristate "AMD Opteron/Athlon64 on-CPU GART support"
-	depends on AGP && X86
+	depends on AGP && X86 && K8_NB
 	help
 	  This option gives you AGP support for the GLX component of
 	  X using the on-CPU northbridge of the AMD Athlon64/Opteron CPUs.
diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c
index 919a28558d36..a3e10dc7cc25 100644
--- a/drivers/char/agp/intel-agp.c
+++ b/drivers/char/agp/intel-agp.c
@@ -298,7 +298,7 @@ static void intel_agp_insert_sg_entries(struct agp_memory *mem,
 			j++;
 		}
 	} else {
-		/* sg may merge pages, but we have to seperate
+		/* sg may merge pages, but we have to separate
 		 * per-page addr for GTT */
 		unsigned int len, m;
 
diff --git a/drivers/char/applicom.c b/drivers/char/applicom.c
index fe2cb2f5db17..a7424bf7eacf 100644
--- a/drivers/char/applicom.c
+++ b/drivers/char/applicom.c
@@ -14,7 +14,7 @@
 /* et passe en argument a acinit, mais est scrute sur le bus pour s'adapter  */
 /* au nombre de cartes presentes sur le bus. IOCL code 6 affichait V2.4.3    */
 /* F.LAFORSE 28/11/95 creation de fichiers acXX.o avec les differentes       */
-/* adresses de base des cartes, IOCTL 6 plus complet                         */
+/* addresses de base des cartes, IOCTL 6 plus complet                         */
 /* J.PAGET le 19/08/96 copie de la version V2.6 en V2.8.0 sans modification  */
 /* de code autre que le texte V2.6.1 en V2.8.0                               */
 /*****************************************************************************/
diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c
index e481c5938bad..9c5eea3ea4de 100644
--- a/drivers/char/hpet.c
+++ b/drivers/char/hpet.c
@@ -215,9 +215,7 @@ static void hpet_timer_set_irq(struct hpet_dev *devp)
 	else
 		v &= ~0xffff;
 
-	for (irq = find_first_bit(&v, HPET_MAX_IRQ); irq < HPET_MAX_IRQ;
-		irq = find_next_bit(&v, HPET_MAX_IRQ, 1 + irq)) {
-
+	for_each_set_bit(irq, &v, HPET_MAX_IRQ) {
 		if (irq >= nr_irqs) {
 			irq = HPET_MAX_IRQ;
 			break;
diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c
index 465185fc0f52..ba55bba151b9 100644
--- a/drivers/char/hvc_console.c
+++ b/drivers/char/hvc_console.c
@@ -312,6 +312,7 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)
 	spin_lock_irqsave(&hp->lock, flags);
 	/* Check and then increment for fast path open. */
 	if (hp->count++ > 0) {
+		tty_kref_get(tty);
 		spin_unlock_irqrestore(&hp->lock, flags);
 		hvc_kick();
 		return 0;
@@ -319,7 +320,7 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)
 
 	tty->driver_data = hp;
 
-	hp->tty = tty;
+	hp->tty = tty_kref_get(tty);
 
 	spin_unlock_irqrestore(&hp->lock, flags);
 
@@ -336,6 +337,7 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)
 		spin_lock_irqsave(&hp->lock, flags);
 		hp->tty = NULL;
 		spin_unlock_irqrestore(&hp->lock, flags);
+		tty_kref_put(tty);
 		tty->driver_data = NULL;
 		kref_put(&hp->kref, destroy_hvc_struct);
 		printk(KERN_ERR "hvc_open: request_irq failed with rc %d.\n", rc);
@@ -363,13 +365,18 @@ static void hvc_close(struct tty_struct *tty, struct file * filp)
 		return;
 
 	hp = tty->driver_data;
+
 	spin_lock_irqsave(&hp->lock, flags);
+	tty_kref_get(tty);
 
 	if (--hp->count == 0) {
 		/* We are done with the tty pointer now. */
 		hp->tty = NULL;
 		spin_unlock_irqrestore(&hp->lock, flags);
 
+		/* Put the ref obtained in hvc_open() */
+		tty_kref_put(tty);
+
 		if (hp->ops->notifier_del)
 			hp->ops->notifier_del(hp, hp->data);
 
@@ -389,6 +396,7 @@ static void hvc_close(struct tty_struct *tty, struct file * filp)
 		spin_unlock_irqrestore(&hp->lock, flags);
 	}
 
+	tty_kref_put(tty);
 	kref_put(&hp->kref, destroy_hvc_struct);
 }
 
@@ -424,10 +432,11 @@ static void hvc_hangup(struct tty_struct *tty)
 	spin_unlock_irqrestore(&hp->lock, flags);
 
 	if (hp->ops->notifier_hangup)
-			hp->ops->notifier_hangup(hp, hp->data);
+		hp->ops->notifier_hangup(hp, hp->data);
 
 	while(temp_open_count) {
 		--temp_open_count;
+		tty_kref_put(tty);
 		kref_put(&hp->kref, destroy_hvc_struct);
 	}
 }
@@ -592,7 +601,7 @@ int hvc_poll(struct hvc_struct *hp)
 	}
 
 	/* No tty attached, just skip */
-	tty = hp->tty;
+	tty = tty_kref_get(hp->tty);
 	if (tty == NULL)
 		goto bail;
 
@@ -672,6 +681,8 @@ int hvc_poll(struct hvc_struct *hp)
 
 		tty_flip_buffer_push(tty);
 	}
+	if (tty)
+		tty_kref_put(tty);
 
 	return poll_mask;
 }
@@ -807,7 +818,7 @@ int hvc_remove(struct hvc_struct *hp)
 	struct tty_struct *tty;
 
 	spin_lock_irqsave(&hp->lock, flags);
-	tty = hp->tty;
+	tty = tty_kref_get(hp->tty);
 
 	if (hp->index < MAX_NR_HVC_CONSOLES)
 		vtermnos[hp->index] = -1;
@@ -819,18 +830,18 @@ int hvc_remove(struct hvc_struct *hp)
 	/*
 	 * We 'put' the instance that was grabbed when the kref instance
 	 * was initialized using kref_init().  Let the last holder of this
-	 * kref cause it to be removed, which will probably be the tty_hangup
+	 * kref cause it to be removed, which will probably be the tty_vhangup
 	 * below.
 	 */
 	kref_put(&hp->kref, destroy_hvc_struct);
 
 	/*
-	 * This function call will auto chain call hvc_hangup.  The tty should
-	 * always be valid at this time unless a simultaneous tty close already
-	 * cleaned up the hvc_struct.
+	 * This function call will auto chain call hvc_hangup.
 	 */
-	if (tty)
-		tty_hangup(tty);
+	if (tty) {
+		tty_vhangup(tty);
+		tty_kref_put(tty);
+	}
 	return 0;
 }
 EXPORT_SYMBOL_GPL(hvc_remove);
diff --git a/drivers/char/hvc_iseries.c b/drivers/char/hvc_iseries.c
index fd0242676a2a..21c54955084e 100644
--- a/drivers/char/hvc_iseries.c
+++ b/drivers/char/hvc_iseries.c
@@ -353,7 +353,7 @@ static void hvc_close_event(struct HvLpEvent *event)
 
 	if (!hvlpevent_is_int(event)) {
 		printk(KERN_WARNING
-			"hvc: got unexpected close acknowlegement\n");
+			"hvc: got unexpected close acknowledgement\n");
 		return;
 	}
 
diff --git a/drivers/char/hvc_iucv.c b/drivers/char/hvc_iucv.c
index 21681a81cc35..37b0542a4eeb 100644
--- a/drivers/char/hvc_iucv.c
+++ b/drivers/char/hvc_iucv.c
@@ -139,6 +139,8 @@ struct hvc_iucv_private *hvc_iucv_get_private(uint32_t num)
  *
  * This function allocates a new struct iucv_tty_buffer element and, optionally,
  * allocates an internal data buffer with the specified size @size.
+ * The internal data buffer is always allocated with GFP_DMA which is
+ * required for receiving and sending data with IUCV.
  * Note: The total message size arises from the internal buffer size and the
  *	 members of the iucv_tty_msg structure.
  * The function returns NULL if memory allocation has failed.
@@ -154,7 +156,7 @@ static struct iucv_tty_buffer *alloc_tty_buffer(size_t size, gfp_t flags)
 
 	if (size > 0) {
 		bufp->msg.length = MSG_SIZE(size);
-		bufp->mbuf = kmalloc(bufp->msg.length, flags);
+		bufp->mbuf = kmalloc(bufp->msg.length, flags | GFP_DMA);
 		if (!bufp->mbuf) {
 			mempool_free(bufp, hvc_iucv_mempool);
 			return NULL;
@@ -237,7 +239,7 @@ static int hvc_iucv_write(struct hvc_iucv_private *priv,
 	if (!rb->mbuf) { /* message not yet received ... */
 		/* allocate mem to store msg data; if no memory is available
 		 * then leave the buffer on the list and re-try later */
-		rb->mbuf = kmalloc(rb->msg.length, GFP_ATOMIC);
+		rb->mbuf = kmalloc(rb->msg.length, GFP_ATOMIC | GFP_DMA);
 		if (!rb->mbuf)
 			return -ENOMEM;
 
diff --git a/drivers/char/hw_random/n2-drv.c b/drivers/char/hw_random/n2-drv.c
index 9b3e09cd41f9..10f868eefaa6 100644
--- a/drivers/char/hw_random/n2-drv.c
+++ b/drivers/char/hw_random/n2-drv.c
@@ -71,7 +71,7 @@ MODULE_VERSION(DRV_MODULE_VERSION);
  *        x22 + x21 + x17 + x15 + x13 + x12 + x11 + x7 + x5 + x + 1
  *
  * The RNG_CTL_VCO value of each noise cell must be programmed
- * seperately.  This is why 4 control register values must be provided
+ * separately.  This is why 4 control register values must be provided
  * to the hypervisor.  During a write, the hypervisor writes them all,
  * one at a time, to the actual RNG_CTL register.  The first three
  * values are used to setup the desired RNG_CTL_VCO for each entropy
diff --git a/drivers/char/ip2/i2hw.h b/drivers/char/ip2/i2hw.h
index 8aa6e7ab8d5b..c0ba6c05f0cd 100644
--- a/drivers/char/ip2/i2hw.h
+++ b/drivers/char/ip2/i2hw.h
@@ -559,7 +559,7 @@ Loadware may be sent to the board in two ways:
 
 2) It may be hard-coded into your source by including a .h file (typically
 	supplied by Computone), which declares a data array and initializes every
-	element. This acheives the same result as if an entire loadware file had 
+	element. This achieves the same result as if an entire loadware file had 
 	been read into the array.
 
 	This requires more data space in your program, but access to the file system
diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c
index ec5e3f8df648..c6ad4234378d 100644
--- a/drivers/char/ipmi/ipmi_msghandler.c
+++ b/drivers/char/ipmi/ipmi_msghandler.c
@@ -2272,42 +2272,52 @@ static int create_files(struct bmc_device *bmc)
 	bmc->device_id_attr.attr.name = "device_id";
 	bmc->device_id_attr.attr.mode = S_IRUGO;
 	bmc->device_id_attr.show = device_id_show;
+	sysfs_attr_init(&bmc->device_id_attr.attr);
 
 	bmc->provides_dev_sdrs_attr.attr.name = "provides_device_sdrs";
 	bmc->provides_dev_sdrs_attr.attr.mode = S_IRUGO;
 	bmc->provides_dev_sdrs_attr.show = provides_dev_sdrs_show;
+	sysfs_attr_init(&bmc->provides_dev_sdrs_attr.attr);
 
 	bmc->revision_attr.attr.name = "revision";
 	bmc->revision_attr.attr.mode = S_IRUGO;
 	bmc->revision_attr.show = revision_show;
+	sysfs_attr_init(&bmc->revision_attr.attr);
 
 	bmc->firmware_rev_attr.attr.name = "firmware_revision";
 	bmc->firmware_rev_attr.attr.mode = S_IRUGO;
 	bmc->firmware_rev_attr.show = firmware_rev_show;
+	sysfs_attr_init(&bmc->firmware_rev_attr.attr);
 
 	bmc->version_attr.attr.name = "ipmi_version";
 	bmc->version_attr.attr.mode = S_IRUGO;
 	bmc->version_attr.show = ipmi_version_show;
+	sysfs_attr_init(&bmc->version_attr.attr);
 
 	bmc->add_dev_support_attr.attr.name = "additional_device_support";
 	bmc->add_dev_support_attr.attr.mode = S_IRUGO;
 	bmc->add_dev_support_attr.show = add_dev_support_show;
+	sysfs_attr_init(&bmc->add_dev_support_attr.attr);
 
 	bmc->manufacturer_id_attr.attr.name = "manufacturer_id";
 	bmc->manufacturer_id_attr.attr.mode = S_IRUGO;
 	bmc->manufacturer_id_attr.show = manufacturer_id_show;
+	sysfs_attr_init(&bmc->manufacturer_id_attr.attr);
 
 	bmc->product_id_attr.attr.name = "product_id";
 	bmc->product_id_attr.attr.mode = S_IRUGO;
 	bmc->product_id_attr.show = product_id_show;
+	sysfs_attr_init(&bmc->product_id_attr.attr);
 
 	bmc->guid_attr.attr.name = "guid";
 	bmc->guid_attr.attr.mode = S_IRUGO;
 	bmc->guid_attr.show = guid_show;
+	sysfs_attr_init(&bmc->guid_attr.attr);
 
 	bmc->aux_firmware_rev_attr.attr.name = "aux_firmware_revision";
 	bmc->aux_firmware_rev_attr.attr.mode = S_IRUGO;
 	bmc->aux_firmware_rev_attr.show = aux_firmware_rev_show;
+	sysfs_attr_init(&bmc->aux_firmware_rev_attr.attr);
 
 	err = device_create_file(&bmc->dev->dev,
 			   &bmc->device_id_attr);
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 176f1751237f..4462b113ba3f 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -295,6 +295,9 @@ struct smi_info {
 static int force_kipmid[SI_MAX_PARMS];
 static int num_force_kipmid;
 
+static unsigned int kipmid_max_busy_us[SI_MAX_PARMS];
+static int num_max_busy_us;
+
 static int unload_when_empty = 1;
 
 static int try_smi_init(struct smi_info *smi);
@@ -925,23 +928,77 @@ static void set_run_to_completion(void *send_info, int i_run_to_completion)
 	}
 }
 
+/*
+ * Use -1 in the nsec value of the busy waiting timespec to tell that
+ * we are spinning in kipmid looking for something and not delaying
+ * between checks
+ */
+static inline void ipmi_si_set_not_busy(struct timespec *ts)
+{
+	ts->tv_nsec = -1;
+}
+static inline int ipmi_si_is_busy(struct timespec *ts)
+{
+	return ts->tv_nsec != -1;
+}
+
+static int ipmi_thread_busy_wait(enum si_sm_result smi_result,
+				 const struct smi_info *smi_info,
+				 struct timespec *busy_until)
+{
+	unsigned int max_busy_us = 0;
+
+	if (smi_info->intf_num < num_max_busy_us)
+		max_busy_us = kipmid_max_busy_us[smi_info->intf_num];
+	if (max_busy_us == 0 || smi_result != SI_SM_CALL_WITH_DELAY)
+		ipmi_si_set_not_busy(busy_until);
+	else if (!ipmi_si_is_busy(busy_until)) {
+		getnstimeofday(busy_until);
+		timespec_add_ns(busy_until, max_busy_us*NSEC_PER_USEC);
+	} else {
+		struct timespec now;
+		getnstimeofday(&now);
+		if (unlikely(timespec_compare(&now, busy_until) > 0)) {
+			ipmi_si_set_not_busy(busy_until);
+			return 0;
+		}
+	}
+	return 1;
+}
+
+
+/*
+ * A busy-waiting loop for speeding up IPMI operation.
+ *
+ * Lousy hardware makes this hard.  This is only enabled for systems
+ * that are not BT and do not have interrupts.  It starts spinning
+ * when an operation is complete or until max_busy tells it to stop
+ * (if that is enabled).  See the paragraph on kimid_max_busy_us in
+ * Documentation/IPMI.txt for details.
+ */
 static int ipmi_thread(void *data)
 {
 	struct smi_info *smi_info = data;
 	unsigned long flags;
 	enum si_sm_result smi_result;
+	struct timespec busy_until;
 
+	ipmi_si_set_not_busy(&busy_until);
 	set_user_nice(current, 19);
 	while (!kthread_should_stop()) {
+		int busy_wait;
+
 		spin_lock_irqsave(&(smi_info->si_lock), flags);
 		smi_result = smi_event_handler(smi_info, 0);
 		spin_unlock_irqrestore(&(smi_info->si_lock), flags);
+		busy_wait = ipmi_thread_busy_wait(smi_result, smi_info,
+						  &busy_until);
 		if (smi_result == SI_SM_CALL_WITHOUT_DELAY)
 			; /* do nothing */
-		else if (smi_result == SI_SM_CALL_WITH_DELAY)
+		else if (smi_result == SI_SM_CALL_WITH_DELAY && busy_wait)
 			schedule();
 		else
-			schedule_timeout_interruptible(1);
+			schedule_timeout_interruptible(0);
 	}
 	return 0;
 }
@@ -1144,7 +1201,7 @@ static int           regsizes[SI_MAX_PARMS];
 static unsigned int num_regsizes;
 static int           regshifts[SI_MAX_PARMS];
 static unsigned int num_regshifts;
-static int slave_addrs[SI_MAX_PARMS];
+static int slave_addrs[SI_MAX_PARMS]; /* Leaving 0 chooses the default value */
 static unsigned int num_slave_addrs;
 
 #define IPMI_IO_ADDR_SPACE  0
@@ -1212,6 +1269,11 @@ module_param(unload_when_empty, int, 0);
 MODULE_PARM_DESC(unload_when_empty, "Unload the module if no interfaces are"
 		 " specified or found, default is 1.  Setting to 0"
 		 " is useful for hot add of devices using hotmod.");
+module_param_array(kipmid_max_busy_us, uint, &num_max_busy_us, 0644);
+MODULE_PARM_DESC(kipmid_max_busy_us,
+		 "Max time (in microseconds) to busy-wait for IPMI data before"
+		 " sleeping. 0 (default) means to wait forever. Set to 100-500"
+		 " if kipmid is using up a lot of CPU time.");
 
 
 static void std_irq_cleanup(struct smi_info *info)
@@ -1607,7 +1669,7 @@ static int hotmod_handler(const char *val, struct kernel_param *kp)
 		regsize = 1;
 		regshift = 0;
 		irq = 0;
-		ipmb = 0x20;
+		ipmb = 0; /* Choose the default if not specified */
 
 		next = strchr(curr, ':');
 		if (next) {
@@ -1799,6 +1861,7 @@ static __devinit void hardcode_find_bmc(void)
 		info->irq = irqs[i];
 		if (info->irq)
 			info->irq_setup = std_irq_setup;
+		info->slave_addr = slave_addrs[i];
 
 		try_smi_init(info);
 	}
diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index 48788db4e280..1f3215ac085b 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -3,7 +3,7 @@
  *
  *  Copyright (C) 1991, 1992  Linus Torvalds
  *
- *  Added devfs support. 
+ *  Added devfs support.
  *    Jan-11-1998, C. Scott Ananian <cananian@alumni.princeton.edu>
  *  Shared /dev/zero mmapping support, Feb 2000, Kanoj Sarcar <kanoj@sgi.com>
  */
@@ -44,36 +44,6 @@ static inline unsigned long size_inside_page(unsigned long start,
 	return min(sz, size);
 }
 
-/*
- * Architectures vary in how they handle caching for addresses
- * outside of main memory.
- *
- */
-static inline int uncached_access(struct file *file, unsigned long addr)
-{
-#if defined(CONFIG_IA64)
-	/*
-	 * On ia64, we ignore O_DSYNC because we cannot tolerate memory attribute aliases.
-	 */
-	return !(efi_mem_attributes(addr) & EFI_MEMORY_WB);
-#elif defined(CONFIG_MIPS)
-	{
-		extern int __uncached_access(struct file *file,
-					     unsigned long addr);
-
-		return __uncached_access(file, addr);
-	}
-#else
-	/*
-	 * Accessing memory above the top the kernel knows about or through a file pointer
-	 * that was marked O_DSYNC will be done non-cached.
-	 */
-	if (file->f_flags & O_DSYNC)
-		return 1;
-	return addr >= __pa(high_memory);
-#endif
-}
-
 #ifndef ARCH_HAS_VALID_PHYS_ADDR_RANGE
 static inline int valid_phys_addr_range(unsigned long addr, size_t count)
 {
@@ -115,15 +85,15 @@ static inline int range_is_allowed(unsigned long pfn, unsigned long size)
 }
 #endif
 
-void __attribute__((weak)) unxlate_dev_mem_ptr(unsigned long phys, void *addr)
+void __weak unxlate_dev_mem_ptr(unsigned long phys, void *addr)
 {
 }
 
 /*
- * This funcion reads the *physical* memory. The f_pos points directly to the 
- * memory location. 
+ * This funcion reads the *physical* memory. The f_pos points directly to the
+ * memory location.
  */
-static ssize_t read_mem(struct file * file, char __user * buf,
+static ssize_t read_mem(struct file *file, char __user *buf,
 			size_t count, loff_t *ppos)
 {
 	unsigned long p = *ppos;
@@ -140,10 +110,10 @@ static ssize_t read_mem(struct file * file, char __user * buf,
 		if (sz > 0) {
 			if (clear_user(buf, sz))
 				return -EFAULT;
-			buf += sz; 
-			p += sz; 
-			count -= sz; 
-			read += sz; 
+			buf += sz;
+			p += sz;
+			count -= sz;
+			read += sz;
 		}
 	}
 #endif
@@ -157,9 +127,9 @@ static ssize_t read_mem(struct file * file, char __user * buf,
 			return -EPERM;
 
 		/*
-		 * On ia64 if a page has been mapped somewhere as
-		 * uncached, then it must also be accessed uncached
-		 * by the kernel or data corruption may occur
+		 * On ia64 if a page has been mapped somewhere as uncached, then
+		 * it must also be accessed uncached by the kernel or data
+		 * corruption may occur.
 		 */
 		ptr = xlate_dev_mem_ptr(p);
 		if (!ptr)
@@ -180,7 +150,7 @@ static ssize_t read_mem(struct file * file, char __user * buf,
 	return read;
 }
 
-static ssize_t write_mem(struct file * file, const char __user * buf, 
+static ssize_t write_mem(struct file *file, const char __user *buf,
 			 size_t count, loff_t *ppos)
 {
 	unsigned long p = *ppos;
@@ -212,9 +182,9 @@ static ssize_t write_mem(struct file * file, const char __user * buf,
 			return -EPERM;
 
 		/*
-		 * On ia64 if a page has been mapped somewhere as
-		 * uncached, then it must also be accessed uncached
-		 * by the kernel or data corruption may occur
+		 * On ia64 if a page has been mapped somewhere as uncached, then
+		 * it must also be accessed uncached by the kernel or data
+		 * corruption may occur.
 		 */
 		ptr = xlate_dev_mem_ptr(p);
 		if (!ptr) {
@@ -242,13 +212,46 @@ static ssize_t write_mem(struct file * file, const char __user * buf,
 	return written;
 }
 
-int __attribute__((weak)) phys_mem_access_prot_allowed(struct file *file,
+int __weak phys_mem_access_prot_allowed(struct file *file,
 	unsigned long pfn, unsigned long size, pgprot_t *vma_prot)
 {
 	return 1;
 }
 
 #ifndef __HAVE_PHYS_MEM_ACCESS_PROT
+
+/*
+ * Architectures vary in how they handle caching for addresses
+ * outside of main memory.
+ *
+ */
+static int uncached_access(struct file *file, unsigned long addr)
+{
+#if defined(CONFIG_IA64)
+	/*
+	 * On ia64, we ignore O_DSYNC because we cannot tolerate memory
+	 * attribute aliases.
+	 */
+	return !(efi_mem_attributes(addr) & EFI_MEMORY_WB);
+#elif defined(CONFIG_MIPS)
+	{
+		extern int __uncached_access(struct file *file,
+					     unsigned long addr);
+
+		return __uncached_access(file, addr);
+	}
+#else
+	/*
+	 * Accessing memory above the top the kernel knows about or through a
+	 * file pointer
+	 * that was marked O_DSYNC will be done non-cached.
+	 */
+	if (file->f_flags & O_DSYNC)
+		return 1;
+	return addr >= __pa(high_memory);
+#endif
+}
+
 static pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
 				     unsigned long size, pgprot_t vma_prot)
 {
@@ -294,7 +297,7 @@ static const struct vm_operations_struct mmap_mem_ops = {
 #endif
 };
 
-static int mmap_mem(struct file * file, struct vm_area_struct * vma)
+static int mmap_mem(struct file *file, struct vm_area_struct *vma)
 {
 	size_t size = vma->vm_end - vma->vm_start;
 
@@ -329,7 +332,7 @@ static int mmap_mem(struct file * file, struct vm_area_struct * vma)
 }
 
 #ifdef CONFIG_DEVKMEM
-static int mmap_kmem(struct file * file, struct vm_area_struct * vma)
+static int mmap_kmem(struct file *file, struct vm_area_struct *vma)
 {
 	unsigned long pfn;
 
@@ -337,9 +340,9 @@ static int mmap_kmem(struct file * file, struct vm_area_struct * vma)
 	pfn = __pa((u64)vma->vm_pgoff << PAGE_SHIFT) >> PAGE_SHIFT;
 
 	/*
-	 * RED-PEN: on some architectures there is more mapped memory
-	 * than available in mem_map which pfn_valid checks
-	 * for. Perhaps should add a new macro here.
+	 * RED-PEN: on some architectures there is more mapped memory than
+	 * available in mem_map which pfn_valid checks for. Perhaps should add a
+	 * new macro here.
 	 *
 	 * RED-PEN: vmalloc is not supported right now.
 	 */
@@ -389,7 +392,7 @@ static ssize_t read_oldmem(struct file *file, char __user *buf,
 /*
  * This function reads the *virtual* memory as seen by the kernel.
  */
-static ssize_t read_kmem(struct file *file, char __user *buf, 
+static ssize_t read_kmem(struct file *file, char __user *buf,
 			 size_t count, loff_t *ppos)
 {
 	unsigned long p = *ppos;
@@ -400,8 +403,8 @@ static ssize_t read_kmem(struct file *file, char __user *buf,
 	read = 0;
 	if (p < (unsigned long) high_memory) {
 		low_count = count;
-		if (count > (unsigned long) high_memory - p)
-			low_count = (unsigned long) high_memory - p;
+		if (count > (unsigned long)high_memory - p)
+			low_count = (unsigned long)high_memory - p;
 
 #ifdef __ARCH_HAS_NO_PAGE_ZERO_MAPPED
 		/* we don't have page 0 mapped on sparc and m68k.. */
@@ -465,9 +468,8 @@ static ssize_t read_kmem(struct file *file, char __user *buf,
 }
 
 
-static inline ssize_t
-do_write_kmem(unsigned long p, const char __user *buf,
-	      size_t count, loff_t *ppos)
+static ssize_t do_write_kmem(unsigned long p, const char __user *buf,
+				size_t count, loff_t *ppos)
 {
 	ssize_t written, sz;
 	unsigned long copied;
@@ -491,9 +493,9 @@ do_write_kmem(unsigned long p, const char __user *buf,
 		sz = size_inside_page(p, count);
 
 		/*
-		 * On ia64 if a page has been mapped somewhere as
-		 * uncached, then it must also be accessed uncached
-		 * by the kernel or data corruption may occur
+		 * On ia64 if a page has been mapped somewhere as uncached, then
+		 * it must also be accessed uncached by the kernel or data
+		 * corruption may occur.
 		 */
 		ptr = xlate_dev_kmem_ptr((char *)p);
 
@@ -514,11 +516,10 @@ do_write_kmem(unsigned long p, const char __user *buf,
 	return written;
 }
 
-
 /*
  * This function writes to the *virtual* memory as seen by the kernel.
  */
-static ssize_t write_kmem(struct file * file, const char __user * buf, 
+static ssize_t write_kmem(struct file *file, const char __user *buf,
 			  size_t count, loff_t *ppos)
 {
 	unsigned long p = *ppos;
@@ -570,17 +571,17 @@ static ssize_t write_kmem(struct file * file, const char __user * buf,
 #endif
 
 #ifdef CONFIG_DEVPORT
-static ssize_t read_port(struct file * file, char __user * buf,
+static ssize_t read_port(struct file *file, char __user *buf,
 			 size_t count, loff_t *ppos)
 {
 	unsigned long i = *ppos;
 	char __user *tmp = buf;
 
 	if (!access_ok(VERIFY_WRITE, buf, count))
-		return -EFAULT; 
+		return -EFAULT;
 	while (count-- > 0 && i < 65536) {
-		if (__put_user(inb(i),tmp) < 0) 
-			return -EFAULT;  
+		if (__put_user(inb(i), tmp) < 0)
+			return -EFAULT;
 		i++;
 		tmp++;
 	}
@@ -588,22 +589,22 @@ static ssize_t read_port(struct file * file, char __user * buf,
 	return tmp-buf;
 }
 
-static ssize_t write_port(struct file * file, const char __user * buf,
+static ssize_t write_port(struct file *file, const char __user *buf,
 			  size_t count, loff_t *ppos)
 {
 	unsigned long i = *ppos;
 	const char __user * tmp = buf;
 
-	if (!access_ok(VERIFY_READ,buf,count))
+	if (!access_ok(VERIFY_READ, buf, count))
 		return -EFAULT;
 	while (count-- > 0 && i < 65536) {
 		char c;
 		if (__get_user(c, tmp)) {
 			if (tmp > buf)
 				break;
-			return -EFAULT; 
+			return -EFAULT;
 		}
-		outb(c,i);
+		outb(c, i);
 		i++;
 		tmp++;
 	}
@@ -612,13 +613,13 @@ static ssize_t write_port(struct file * file, const char __user * buf,
 }
 #endif
 
-static ssize_t read_null(struct file * file, char __user * buf,
+static ssize_t read_null(struct file *file, char __user *buf,
 			 size_t count, loff_t *ppos)
 {
 	return 0;
 }
 
-static ssize_t write_null(struct file * file, const char __user * buf,
+static ssize_t write_null(struct file *file, const char __user *buf,
 			  size_t count, loff_t *ppos)
 {
 	return count;
@@ -630,13 +631,13 @@ static int pipe_to_null(struct pipe_inode_info *info, struct pipe_buffer *buf,
 	return sd->len;
 }
 
-static ssize_t splice_write_null(struct pipe_inode_info *pipe,struct file *out,
+static ssize_t splice_write_null(struct pipe_inode_info *pipe, struct file *out,
 				 loff_t *ppos, size_t len, unsigned int flags)
 {
 	return splice_from_pipe(pipe, out, ppos, len, flags, pipe_to_null);
 }
 
-static ssize_t read_zero(struct file * file, char __user * buf, 
+static ssize_t read_zero(struct file *file, char __user *buf,
 			 size_t count, loff_t *ppos)
 {
 	size_t written;
@@ -667,7 +668,7 @@ static ssize_t read_zero(struct file * file, char __user * buf,
 	return written ? written : -EFAULT;
 }
 
-static int mmap_zero(struct file * file, struct vm_area_struct * vma)
+static int mmap_zero(struct file *file, struct vm_area_struct *vma)
 {
 #ifndef CONFIG_MMU
 	return -ENOSYS;
@@ -677,7 +678,7 @@ static int mmap_zero(struct file * file, struct vm_area_struct * vma)
 	return 0;
 }
 
-static ssize_t write_full(struct file * file, const char __user * buf,
+static ssize_t write_full(struct file *file, const char __user *buf,
 			  size_t count, loff_t *ppos)
 {
 	return -ENOSPC;
@@ -688,8 +689,7 @@ static ssize_t write_full(struct file * file, const char __user * buf,
  * can fopen() both devices with "a" now.  This was previously impossible.
  * -- SRB.
  */
-
-static loff_t null_lseek(struct file * file, loff_t offset, int orig)
+static loff_t null_lseek(struct file *file, loff_t offset, int orig)
 {
 	return file->f_pos = 0;
 }
@@ -702,24 +702,31 @@ static loff_t null_lseek(struct file * file, loff_t offset, int orig)
  * also note that seeking relative to the "end of file" isn't supported:
  * it has no meaning, so it returns -EINVAL.
  */
-static loff_t memory_lseek(struct file * file, loff_t offset, int orig)
+static loff_t memory_lseek(struct file *file, loff_t offset, int orig)
 {
 	loff_t ret;
 
 	mutex_lock(&file->f_path.dentry->d_inode->i_mutex);
 	switch (orig) {
-		case 0:
-			file->f_pos = offset;
-			ret = file->f_pos;
-			force_successful_syscall_return();
+	case SEEK_CUR:
+		offset += file->f_pos;
+		if ((unsigned long long)offset <
+		    (unsigned long long)file->f_pos) {
+			ret = -EOVERFLOW;
 			break;
-		case 1:
-			file->f_pos += offset;
-			ret = file->f_pos;
-			force_successful_syscall_return();
+		}
+	case SEEK_SET:
+		/* to avoid userland mistaking f_pos=-9 as -EBADF=-9 */
+		if ((unsigned long long)offset >= ~0xFFFULL) {
+			ret = -EOVERFLOW;
 			break;
-		default:
-			ret = -EINVAL;
+		}
+		file->f_pos = offset;
+		ret = file->f_pos;
+		force_successful_syscall_return();
+		break;
+	default:
+		ret = -EINVAL;
 	}
 	mutex_unlock(&file->f_path.dentry->d_inode->i_mutex);
 	return ret;
@@ -803,7 +810,7 @@ static const struct file_operations oldmem_fops = {
 };
 #endif
 
-static ssize_t kmsg_write(struct file * file, const char __user * buf,
+static ssize_t kmsg_write(struct file *file, const char __user *buf,
 			  size_t count, loff_t *ppos)
 {
 	char *tmp;
@@ -825,7 +832,7 @@ static ssize_t kmsg_write(struct file * file, const char __user * buf,
 }
 
 static const struct file_operations kmsg_fops = {
-	.write =	kmsg_write,
+	.write = kmsg_write,
 };
 
 static const struct memdev {
@@ -876,7 +883,7 @@ static int memory_open(struct inode *inode, struct file *filp)
 }
 
 static const struct file_operations memory_fops = {
-	.open		= memory_open,
+	.open = memory_open,
 };
 
 static char *mem_devnode(struct device *dev, mode_t *mode)
@@ -897,7 +904,7 @@ static int __init chr_dev_init(void)
 	if (err)
 		return err;
 
-	if (register_chrdev(MEM_MAJOR,"mem",&memory_fops))
+	if (register_chrdev(MEM_MAJOR, "mem", &memory_fops))
 		printk("unable to get major %d for memory devs\n", MEM_MAJOR);
 
 	mem_class = class_create(THIS_MODULE, "mem");
diff --git a/drivers/char/mmtimer.c b/drivers/char/mmtimer.c
index 918711aa56f3..04fd0d843b3b 100644
--- a/drivers/char/mmtimer.c
+++ b/drivers/char/mmtimer.c
@@ -546,7 +546,7 @@ static void mmtimer_tasklet(unsigned long data)
 {
 	int nodeid = data;
 	struct mmtimer_node *mn = &timers[nodeid];
-	struct mmtimer *x = rb_entry(mn->next, struct mmtimer, list);
+	struct mmtimer *x;
 	struct k_itimer *t;
 	unsigned long flags;
 
diff --git a/drivers/char/n_tty.c b/drivers/char/n_tty.c
index 2e50f4dfc79c..bdae8327143c 100644
--- a/drivers/char/n_tty.c
+++ b/drivers/char/n_tty.c
@@ -48,6 +48,7 @@
 #include <linux/audit.h>
 #include <linux/file.h>
 #include <linux/uaccess.h>
+#include <linux/module.h>
 
 #include <asm/system.h>
 
@@ -2091,3 +2092,19 @@ struct tty_ldisc_ops tty_ldisc_N_TTY = {
 	.receive_buf     = n_tty_receive_buf,
 	.write_wakeup    = n_tty_write_wakeup
 };
+
+/**
+ *	n_tty_inherit_ops	-	inherit N_TTY methods
+ *	@ops: struct tty_ldisc_ops where to save N_TTY methods
+ *
+ *	Used by a generic struct tty_ldisc_ops to easily inherit N_TTY
+ *	methods.
+ */
+
+void n_tty_inherit_ops(struct tty_ldisc_ops *ops)
+{
+	*ops = tty_ldisc_N_TTY;
+	ops->owner = NULL;
+	ops->refcount = ops->flags = 0;
+}
+EXPORT_SYMBOL_GPL(n_tty_inherit_ops);
diff --git a/drivers/char/pty.c b/drivers/char/pty.c
index 385c44b3034f..5ee424817263 100644
--- a/drivers/char/pty.c
+++ b/drivers/char/pty.c
@@ -220,7 +220,7 @@ static void pty_set_termios(struct tty_struct *tty,
  *	@tty: tty being resized
  *	@ws: window size being set.
  *
- *	Update the termios variables and send the neccessary signals to
+ *	Update the termios variables and send the necessary signals to
  *	peform a terminal resize correctly
  */
 
diff --git a/drivers/char/random.c b/drivers/char/random.c
index 2849713d2231..2fd3d39995d5 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -1191,7 +1191,7 @@ const struct file_operations urandom_fops = {
 void generate_random_uuid(unsigned char uuid_out[16])
 {
 	get_random_bytes(uuid_out, 16);
-	/* Set UUID version to 4 --- truely random generation */
+	/* Set UUID version to 4 --- truly random generation */
 	uuid_out[6] = (uuid_out[6] & 0x0F) | 0x40;
 	/* Set the UUID variant to DCE */
 	uuid_out[8] = (uuid_out[8] & 0x3F) | 0x80;
diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c
index 986aa606a6b6..1ec3d5cd748f 100644
--- a/drivers/char/serial167.c
+++ b/drivers/char/serial167.c
@@ -1989,7 +1989,7 @@ void mvme167_serial_console_setup(int cflag)
 	/*
 	 * Attempt to set up all channels to something reasonable, and
 	 * bang out a INIT_CHAN command.  We should then be able to limit
-	 * the ammount of fiddling we have to do in normal running.
+	 * the amount of fiddling we have to do in normal running.
 	 */
 
 	for (ch = 3; ch >= 0; ch--) {
diff --git a/drivers/char/tty_audit.c b/drivers/char/tty_audit.c
index ac16fbec72d0..283a15bc84e3 100644
--- a/drivers/char/tty_audit.c
+++ b/drivers/char/tty_audit.c
@@ -148,7 +148,6 @@ void tty_audit_fork(struct signal_struct *sig)
 	spin_lock_irq(&current->sighand->siglock);
 	sig->audit_tty = current->signal->audit_tty;
 	spin_unlock_irq(&current->sighand->siglock);
-	sig->tty_audit_buf = NULL;
 }
 
 /**
diff --git a/drivers/char/tty_buffer.c b/drivers/char/tty_buffer.c
index af8d97715728..7ee52164d474 100644
--- a/drivers/char/tty_buffer.c
+++ b/drivers/char/tty_buffer.c
@@ -248,7 +248,7 @@ int tty_insert_flip_string_fixed_flag(struct tty_struct *tty,
 {
 	int copied = 0;
 	do {
-		int goal = min(size - copied, TTY_BUFFER_PAGE);
+		int goal = min_t(size_t, size - copied, TTY_BUFFER_PAGE);
 		int space = tty_buffer_request_room(tty, goal);
 		struct tty_buffer *tb = tty->buf.tail;
 		/* If there is no space then tb may be NULL */
@@ -285,7 +285,7 @@ int tty_insert_flip_string_flags(struct tty_struct *tty,
 {
 	int copied = 0;
 	do {
-		int goal = min(size - copied, TTY_BUFFER_PAGE);
+		int goal = min_t(size_t, size - copied, TTY_BUFFER_PAGE);
 		int space = tty_buffer_request_room(tty, goal);
 		struct tty_buffer *tb = tty->buf.tail;
 		/* If there is no space then tb may be NULL */
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index dcb9083ecde0..a42c466f7092 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -2028,7 +2028,7 @@ static int tiocgwinsz(struct tty_struct *tty, struct winsize __user *arg)
  *	@rows: rows (character)
  *	@cols: cols (character)
  *
- *	Update the termios variables and send the neccessary signals to
+ *	Update the termios variables and send the necessary signals to
  *	peform a terminal resize correctly
  */
 
diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c
index be492dd66437..a3bd1d0b66cf 100644
--- a/drivers/char/tty_port.c
+++ b/drivers/char/tty_port.c
@@ -119,7 +119,7 @@ EXPORT_SYMBOL(tty_port_tty_set);
 static void tty_port_shutdown(struct tty_port *port)
 {
 	mutex_lock(&port->mutex);
-	if (port->ops->shutdown &&
+	if (port->ops->shutdown && !port->console &&
 		test_and_clear_bit(ASYNCB_INITIALIZED, &port->flags))
 			port->ops->shutdown(port);
 	mutex_unlock(&port->mutex);
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index 50faa1fb0f06..bd1d1164fec5 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -821,7 +821,7 @@ static inline int resize_screen(struct vc_data *vc, int width, int height,
  *
  *	Resize a virtual console, clipping according to the actual constraints.
  *	If the caller passes a tty structure then update the termios winsize
- *	information and perform any neccessary signal handling.
+ *	information and perform any necessary signal handling.
  *
  *	Caller must hold the console semaphore. Takes the termios mutex and
  *	ctrl_lock of the tty IFF a tty is passed.
@@ -2119,8 +2119,6 @@ static int do_con_write(struct tty_struct *tty, const unsigned char *buf, int co
 	uint8_t inverse;
 	uint8_t width;
 	u16 himask, charmask;
-	const unsigned char *orig_buf = NULL;
-	int orig_count;
 
 	if (in_interrupt())
 		return count;
@@ -2142,8 +2140,6 @@ static int do_con_write(struct tty_struct *tty, const unsigned char *buf, int co
 	    release_console_sem();
 	    return 0;
 	}
-	orig_buf = buf;
-	orig_count = count;
 
 	himask = vc->vc_hi_font_mask;
 	charmask = himask ? 0x1ff : 0xff;
diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c
index 87778dcf8727..6aa10284104a 100644
--- a/drivers/char/vt_ioctl.c
+++ b/drivers/char/vt_ioctl.c
@@ -888,7 +888,7 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
 			ret = -EFAULT;
 			goto out;
 		}
-		if (tmp.mode != VT_AUTO && tmp.mode != VT_PROCESS && tmp.mode != VT_PROCESS_AUTO) {
+		if (tmp.mode != VT_AUTO && tmp.mode != VT_PROCESS) {
 			ret = -EINVAL;
 			goto out;
 		}
@@ -1622,7 +1622,7 @@ static void complete_change_console(struct vc_data *vc)
 	 * telling it that it has acquired. Also check if it has died and
 	 * clean up (similar to logic employed in change_console())
 	 */
-	if (vc->vt_mode.mode == VT_PROCESS || vc->vt_mode.mode == VT_PROCESS_AUTO) {
+	if (vc->vt_mode.mode == VT_PROCESS) {
 		/*
 		 * Send the signal as privileged - kill_pid() will
 		 * tell us if the process has gone or something else
@@ -1682,7 +1682,7 @@ void change_console(struct vc_data *new_vc)
 	 * vt to auto control.
 	 */
 	vc = vc_cons[fg_console].d;
-	if (vc->vt_mode.mode == VT_PROCESS || vc->vt_mode.mode == VT_PROCESS_AUTO) {
+	if (vc->vt_mode.mode == VT_PROCESS) {
 		/*
 		 * Send the signal as privileged - kill_pid() will
 		 * tell us if the process has gone or something else
@@ -1693,28 +1693,27 @@ void change_console(struct vc_data *new_vc)
 		 */
 		vc->vt_newvt = new_vc->vc_num;
 		if (kill_pid(vc->vt_pid, vc->vt_mode.relsig, 1) == 0) {
-			if(vc->vt_mode.mode == VT_PROCESS)
-				/*
-				 * It worked. Mark the vt to switch to and
-				 * return. The process needs to send us a
-				 * VT_RELDISP ioctl to complete the switch.
-				 */
-				return;
-		} else {
 			/*
-			 * The controlling process has died, so we revert back to
-			 * normal operation. In this case, we'll also change back
-			 * to KD_TEXT mode. I'm not sure if this is strictly correct
-			 * but it saves the agony when the X server dies and the screen
-			 * remains blanked due to KD_GRAPHICS! It would be nice to do
-			 * this outside of VT_PROCESS but there is no single process
-			 * to account for and tracking tty count may be undesirable.
+			 * It worked. Mark the vt to switch to and
+			 * return. The process needs to send us a
+			 * VT_RELDISP ioctl to complete the switch.
 			 */
-			reset_vc(vc);
+			return;
 		}
 
 		/*
-		 * Fall through to normal (VT_AUTO and VT_PROCESS_AUTO) handling of the switch...
+		 * The controlling process has died, so we revert back to
+		 * normal operation. In this case, we'll also change back
+		 * to KD_TEXT mode. I'm not sure if this is strictly correct
+		 * but it saves the agony when the X server dies and the screen
+		 * remains blanked due to KD_GRAPHICS! It would be nice to do
+		 * this outside of VT_PROCESS but there is no single process
+		 * to account for and tracking tty count may be undesirable.
+		 */
+		reset_vc(vc);
+
+		/*
+		 * Fall through to normal (VT_AUTO) handling of the switch...
 		 */
 	}
 
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 67bc2ece7b4b..2d5d575e889d 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -766,7 +766,7 @@ static void cpufreq_sysfs_release(struct kobject *kobj)
 	complete(&policy->kobj_unregister);
 }
 
-static struct sysfs_ops sysfs_ops = {
+static const struct sysfs_ops sysfs_ops = {
 	.show	= show,
 	.store	= store,
 };
diff --git a/drivers/cpuidle/sysfs.c b/drivers/cpuidle/sysfs.c
index 97b003839fb6..8719b36e1a4d 100644
--- a/drivers/cpuidle/sysfs.c
+++ b/drivers/cpuidle/sysfs.c
@@ -22,6 +22,7 @@ static int __init cpuidle_sysfs_setup(char *unused)
 __setup("cpuidle_sysfs_switch", cpuidle_sysfs_setup);
 
 static ssize_t show_available_governors(struct sysdev_class *class,
+					struct sysdev_class_attribute *attr,
 					char *buf)
 {
 	ssize_t i = 0;
@@ -41,6 +42,7 @@ out:
 }
 
 static ssize_t show_current_driver(struct sysdev_class *class,
+				   struct sysdev_class_attribute *attr,
 				   char *buf)
 {
 	ssize_t ret;
@@ -56,6 +58,7 @@ static ssize_t show_current_driver(struct sysdev_class *class,
 }
 
 static ssize_t show_current_governor(struct sysdev_class *class,
+				     struct sysdev_class_attribute *attr,
 				     char *buf)
 {
 	ssize_t ret;
@@ -71,6 +74,7 @@ static ssize_t show_current_governor(struct sysdev_class *class,
 }
 
 static ssize_t store_current_governor(struct sysdev_class *class,
+				      struct sysdev_class_attribute *attr,
 				      const char *buf, size_t count)
 {
 	char gov_name[CPUIDLE_NAME_LEN];
@@ -191,7 +195,7 @@ static ssize_t cpuidle_store(struct kobject * kobj, struct attribute * attr,
 	return ret;
 }
 
-static struct sysfs_ops cpuidle_sysfs_ops = {
+static const struct sysfs_ops cpuidle_sysfs_ops = {
 	.show = cpuidle_show,
 	.store = cpuidle_store,
 };
@@ -277,7 +281,7 @@ static ssize_t cpuidle_state_show(struct kobject * kobj,
 	return ret;
 }
 
-static struct sysfs_ops cpuidle_state_sysfs_ops = {
+static const struct sysfs_ops cpuidle_state_sysfs_ops = {
 	.show = cpuidle_state_show,
 };
 
diff --git a/drivers/crypto/hifn_795x.c b/drivers/crypto/hifn_795x.c
index 09ad9154d86c..73e8b1713b54 100644
--- a/drivers/crypto/hifn_795x.c
+++ b/drivers/crypto/hifn_795x.c
@@ -321,7 +321,7 @@ static atomic_t hifn_dev_number;
 #define	HIFN_PUBOPLEN_MOD_M	0x0000007f	/* modulus length mask */
 #define	HIFN_PUBOPLEN_MOD_S	0		/* modulus length shift */
 #define	HIFN_PUBOPLEN_EXP_M	0x0003ff80	/* exponent length mask */
-#define	HIFN_PUBOPLEN_EXP_S	7		/* exponent lenght shift */
+#define	HIFN_PUBOPLEN_EXP_S	7		/* exponent length shift */
 #define	HIFN_PUBOPLEN_RED_M	0x003c0000	/* reducend length mask */
 #define	HIFN_PUBOPLEN_RED_S	18		/* reducend length shift */
 
diff --git a/drivers/dma/coh901318_lli.h b/drivers/dma/coh901318_lli.h
index 7bf713b79c6b..7a5c80990e9e 100644
--- a/drivers/dma/coh901318_lli.h
+++ b/drivers/dma/coh901318_lli.h
@@ -30,7 +30,7 @@ struct device;
  * @pool: pool handle
  * @dev: dma device
  * @lli_nbr: number of lli:s in the pool
- * @algin: adress alignemtn of lli:s
+ * @algin: address alignemtn of lli:s
  * returns 0 on success otherwise none zero
  */
 int coh901318_pool_create(struct coh901318_pool *pool,
diff --git a/drivers/dma/ioat/dma.c b/drivers/dma/ioat/dma.c
index af14c9a5b8d4..0099340b9616 100644
--- a/drivers/dma/ioat/dma.c
+++ b/drivers/dma/ioat/dma.c
@@ -1138,7 +1138,7 @@ ioat_attr_show(struct kobject *kobj, struct attribute *attr, char *page)
 	return entry->show(&chan->common, page);
 }
 
-struct sysfs_ops ioat_sysfs_ops = {
+const struct sysfs_ops ioat_sysfs_ops = {
 	.show	= ioat_attr_show,
 };
 
diff --git a/drivers/dma/ioat/dma.h b/drivers/dma/ioat/dma.h
index 4f747a254074..86b97ac8774e 100644
--- a/drivers/dma/ioat/dma.h
+++ b/drivers/dma/ioat/dma.h
@@ -346,7 +346,7 @@ bool ioat_cleanup_preamble(struct ioat_chan_common *chan,
 			   unsigned long *phys_complete);
 void ioat_kobject_add(struct ioatdma_device *device, struct kobj_type *type);
 void ioat_kobject_del(struct ioatdma_device *device);
-extern struct sysfs_ops ioat_sysfs_ops;
+extern const struct sysfs_ops ioat_sysfs_ops;
 extern struct ioat_sysfs_entry ioat_version_attr;
 extern struct ioat_sysfs_entry ioat_cap_attr;
 #endif /* IOATDMA_H */
diff --git a/drivers/edac/e752x_edac.c b/drivers/edac/e752x_edac.c
index d205d493a68a..243e9aacad69 100644
--- a/drivers/edac/e752x_edac.c
+++ b/drivers/edac/e752x_edac.c
@@ -75,6 +75,14 @@ static struct edac_pci_ctl_info *e752x_pci;
 #define E752X_NR_CSROWS		8	/* number of csrows */
 
 /* E752X register addresses - device 0 function 0 */
+#define E752X_MCHSCRB		0x52	/* Memory Scrub register (16b) */
+					/*
+					 * 6:5     Scrub Completion Count
+					 * 3:2     Scrub Rate (i3100 only)
+					 *      01=fast 10=normal
+					 * 1:0     Scrub Mode enable
+					 *      00=off 10=on
+					 */
 #define E752X_DRB		0x60	/* DRAM row boundary register (8b) */
 #define E752X_DRA		0x70	/* DRAM row attribute register (8b) */
 					/*
@@ -240,6 +248,41 @@ static const struct e752x_dev_info e752x_devs[] = {
 		.ctl_name = "3100"},
 };
 
+/* Valid scrub rates for the e752x/3100 hardware memory scrubber. We
+ * map the scrubbing bandwidth to a hardware register value. The 'set'
+ * operation finds the 'matching or higher value'.  Note that scrubbing
+ * on the e752x can only be enabled/disabled.  The 3100 supports
+ * a normal and fast mode.
+ */
+
+#define SDRATE_EOT 0xFFFFFFFF
+
+struct scrubrate {
+	u32 bandwidth;	/* bandwidth consumed by scrubbing in bytes/sec */
+	u16 scrubval;	/* register value for scrub rate */
+};
+
+/* Rate below assumes same performance as i3100 using PC3200 DDR2 in
+ * normal mode.  e752x bridges don't support choosing normal or fast mode,
+ * so the scrubbing bandwidth value isn't all that important - scrubbing is
+ * either on or off.
+ */
+static const struct scrubrate scrubrates_e752x[] = {
+	{0,		0x00},	/* Scrubbing Off */
+	{500000,	0x02},	/* Scrubbing On */
+	{SDRATE_EOT,	0x00}	/* End of Table */
+};
+
+/* Fast mode: 2 GByte PC3200 DDR2 scrubbed in 33s = 63161283 bytes/s
+ * Normal mode: 125 (32000 / 256) times slower than fast mode.
+ */
+static const struct scrubrate scrubrates_i3100[] = {
+	{0,		0x00},	/* Scrubbing Off */
+	{500000,	0x0a},	/* Normal mode - 32k clocks */
+	{62500000,	0x06},	/* Fast mode - 256 clocks */
+	{SDRATE_EOT,	0x00}	/* End of Table */
+};
+
 static unsigned long ctl_page_to_phys(struct mem_ctl_info *mci,
 				unsigned long page)
 {
@@ -915,6 +958,68 @@ static void e752x_check(struct mem_ctl_info *mci)
 	e752x_process_error_info(mci, &info, 1);
 }
 
+/* Program byte/sec bandwidth scrub rate to hardware */
+static int set_sdram_scrub_rate(struct mem_ctl_info *mci, u32 *new_bw)
+{
+	const struct scrubrate *scrubrates;
+	struct e752x_pvt *pvt = (struct e752x_pvt *) mci->pvt_info;
+	struct pci_dev *pdev = pvt->dev_d0f0;
+	int i;
+
+	if (pvt->dev_info->ctl_dev == PCI_DEVICE_ID_INTEL_3100_0)
+		scrubrates = scrubrates_i3100;
+	else
+		scrubrates = scrubrates_e752x;
+
+	/* Translate the desired scrub rate to a e752x/3100 register value.
+	 * Search for the bandwidth that is equal or greater than the
+	 * desired rate and program the cooresponding register value.
+	 */
+	for (i = 0; scrubrates[i].bandwidth != SDRATE_EOT; i++)
+		if (scrubrates[i].bandwidth >= *new_bw)
+			break;
+
+	if (scrubrates[i].bandwidth == SDRATE_EOT)
+		return -1;
+
+	pci_write_config_word(pdev, E752X_MCHSCRB, scrubrates[i].scrubval);
+
+	return 0;
+}
+
+/* Convert current scrub rate value into byte/sec bandwidth */
+static int get_sdram_scrub_rate(struct mem_ctl_info *mci, u32 *bw)
+{
+	const struct scrubrate *scrubrates;
+	struct e752x_pvt *pvt = (struct e752x_pvt *) mci->pvt_info;
+	struct pci_dev *pdev = pvt->dev_d0f0;
+	u16 scrubval;
+	int i;
+
+	if (pvt->dev_info->ctl_dev == PCI_DEVICE_ID_INTEL_3100_0)
+		scrubrates = scrubrates_i3100;
+	else
+		scrubrates = scrubrates_e752x;
+
+	/* Find the bandwidth matching the memory scrubber configuration */
+	pci_read_config_word(pdev, E752X_MCHSCRB, &scrubval);
+	scrubval = scrubval & 0x0f;
+
+	for (i = 0; scrubrates[i].bandwidth != SDRATE_EOT; i++)
+		if (scrubrates[i].scrubval == scrubval)
+			break;
+
+	if (scrubrates[i].bandwidth == SDRATE_EOT) {
+		e752x_printk(KERN_WARNING,
+			"Invalid sdram scrub control value: 0x%x\n", scrubval);
+		return -1;
+	}
+
+	*bw = scrubrates[i].bandwidth;
+
+	return 0;
+}
+
 /* Return 1 if dual channel mode is active.  Else return 0. */
 static inline int dual_channel_active(u16 ddrcsr)
 {
@@ -1073,10 +1178,7 @@ fail:
 
 /* Setup system bus parity mask register.
  * Sysbus parity supported on:
- *   e7320/e7520/e7525 + Xeon
- *   i3100 + Xeon/Celeron
- * Sysbus parity not supported on:
- *   i3100 + Pentium M/Celeron M/Core Duo/Core2 Duo
+ * e7320/e7520/e7525 + Xeon
  */
 static void e752x_init_sysbus_parity_mask(struct e752x_pvt *pvt)
 {
@@ -1087,10 +1189,7 @@ static void e752x_init_sysbus_parity_mask(struct e752x_pvt *pvt)
 	/* Allow module parameter override, else see if CPU supports parity */
 	if (sysbus_parity != -1) {
 		enable = sysbus_parity;
-	} else if (cpu_id[0] &&
-		   ((strstr(cpu_id, "Pentium") && strstr(cpu_id, " M ")) ||
-		    (strstr(cpu_id, "Celeron") && strstr(cpu_id, " M ")) ||
-		    (strstr(cpu_id, "Core") && strstr(cpu_id, "Duo")))) {
+	} else if (cpu_id[0] && !strstr(cpu_id, "Xeon")) {
 		e752x_printk(KERN_INFO, "System Bus Parity not "
 			     "supported by CPU, disabling\n");
 		enable = 0;
@@ -1187,6 +1286,8 @@ static int e752x_probe1(struct pci_dev *pdev, int dev_idx)
 	mci->dev_name = pci_name(pdev);
 	mci->edac_check = e752x_check;
 	mci->ctl_page_to_phys = ctl_page_to_phys;
+	mci->set_sdram_scrub_rate = set_sdram_scrub_rate;
+	mci->get_sdram_scrub_rate = get_sdram_scrub_rate;
 
 	/* set the map type.  1 = normal, 0 = reversed
 	 * Must be set before e752x_init_csrows in case csrow mapping
diff --git a/drivers/edac/edac_device_sysfs.c b/drivers/edac/edac_device_sysfs.c
index 53764577035f..5fdedbc0f545 100644
--- a/drivers/edac/edac_device_sysfs.c
+++ b/drivers/edac/edac_device_sysfs.c
@@ -137,7 +137,7 @@ static ssize_t edac_dev_ctl_info_store(struct kobject *kobj,
 }
 
 /* edac_dev file operations for an 'ctl_info' */
-static struct sysfs_ops device_ctl_info_ops = {
+static const struct sysfs_ops device_ctl_info_ops = {
 	.show = edac_dev_ctl_info_show,
 	.store = edac_dev_ctl_info_store
 };
@@ -373,7 +373,7 @@ static ssize_t edac_dev_instance_store(struct kobject *kobj,
 }
 
 /* edac_dev file operations for an 'instance' */
-static struct sysfs_ops device_instance_ops = {
+static const struct sysfs_ops device_instance_ops = {
 	.show = edac_dev_instance_show,
 	.store = edac_dev_instance_store
 };
@@ -476,7 +476,7 @@ static ssize_t edac_dev_block_store(struct kobject *kobj,
 }
 
 /* edac_dev file operations for a 'block' */
-static struct sysfs_ops device_block_ops = {
+static const struct sysfs_ops device_block_ops = {
 	.show = edac_dev_block_show,
 	.store = edac_dev_block_store
 };
diff --git a/drivers/edac/edac_mc_sysfs.c b/drivers/edac/edac_mc_sysfs.c
index e1d4ce083481..88840e9fa3e0 100644
--- a/drivers/edac/edac_mc_sysfs.c
+++ b/drivers/edac/edac_mc_sysfs.c
@@ -245,7 +245,7 @@ static ssize_t csrowdev_store(struct kobject *kobj, struct attribute *attr,
 	return -EIO;
 }
 
-static struct sysfs_ops csrowfs_ops = {
+static const struct sysfs_ops csrowfs_ops = {
 	.show = csrowdev_show,
 	.store = csrowdev_store
 };
@@ -575,7 +575,7 @@ static ssize_t mcidev_store(struct kobject *kobj, struct attribute *attr,
 }
 
 /* Intermediate show/store table */
-static struct sysfs_ops mci_ops = {
+static const struct sysfs_ops mci_ops = {
 	.show = mcidev_show,
 	.store = mcidev_store
 };
diff --git a/drivers/edac/edac_pci_sysfs.c b/drivers/edac/edac_pci_sysfs.c
index fb60a877d768..bef94e3d9944 100644
--- a/drivers/edac/edac_pci_sysfs.c
+++ b/drivers/edac/edac_pci_sysfs.c
@@ -121,7 +121,7 @@ static ssize_t edac_pci_instance_store(struct kobject *kobj,
 }
 
 /* fs_ops table */
-static struct sysfs_ops pci_instance_ops = {
+static const struct sysfs_ops pci_instance_ops = {
 	.show = edac_pci_instance_show,
 	.store = edac_pci_instance_store
 };
@@ -261,7 +261,7 @@ static ssize_t edac_pci_dev_store(struct kobject *kobj,
 	return -EIO;
 }
 
-static struct sysfs_ops edac_pci_sysfs_ops = {
+static const struct sysfs_ops edac_pci_sysfs_ops = {
 	.show = edac_pci_dev_show,
 	.store = edac_pci_dev_store
 };
diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c
index ecd5928d7110..94cac0aacea3 100644
--- a/drivers/edac/mpc85xx_edac.c
+++ b/drivers/edac/mpc85xx_edac.c
@@ -239,16 +239,15 @@ static int __devinit mpc85xx_pci_err_probe(struct of_device *op,
 	/* we only need the error registers */
 	r.start += 0xe00;
 
-	if (!devm_request_mem_region(&op->dev, r.start,
-					r.end - r.start + 1, pdata->name)) {
+	if (!devm_request_mem_region(&op->dev, r.start, resource_size(&r),
+					pdata->name)) {
 		printk(KERN_ERR "%s: Error while requesting mem region\n",
 		       __func__);
 		res = -EBUSY;
 		goto err;
 	}
 
-	pdata->pci_vbase = devm_ioremap(&op->dev, r.start,
-					r.end - r.start + 1);
+	pdata->pci_vbase = devm_ioremap(&op->dev, r.start, resource_size(&r));
 	if (!pdata->pci_vbase) {
 		printk(KERN_ERR "%s: Unable to setup PCI err regs\n", __func__);
 		res = -ENOMEM;
@@ -668,15 +667,125 @@ static struct of_platform_driver mpc85xx_l2_err_driver = {
 
 /**************************** MC Err device ***************************/
 
+/*
+ * Taken from table 8-55 in the MPC8641 User's Manual and/or 9-61 in the
+ * MPC8572 User's Manual.  Each line represents a syndrome bit column as a
+ * 64-bit value, but split into an upper and lower 32-bit chunk.  The labels
+ * below correspond to Freescale's manuals.
+ */
+static unsigned int ecc_table[16] = {
+	/* MSB           LSB */
+	/* [0:31]    [32:63] */
+	0xf00fe11e, 0xc33c0ff7,	/* Syndrome bit 7 */
+	0x00ff00ff, 0x00fff0ff,
+	0x0f0f0f0f, 0x0f0fff00,
+	0x11113333, 0x7777000f,
+	0x22224444, 0x8888222f,
+	0x44448888, 0xffff4441,
+	0x8888ffff, 0x11118882,
+	0xffff1111, 0x22221114,	/* Syndrome bit 0 */
+};
+
+/*
+ * Calculate the correct ECC value for a 64-bit value specified by high:low
+ */
+static u8 calculate_ecc(u32 high, u32 low)
+{
+	u32 mask_low;
+	u32 mask_high;
+	int bit_cnt;
+	u8 ecc = 0;
+	int i;
+	int j;
+
+	for (i = 0; i < 8; i++) {
+		mask_high = ecc_table[i * 2];
+		mask_low = ecc_table[i * 2 + 1];
+		bit_cnt = 0;
+
+		for (j = 0; j < 32; j++) {
+			if ((mask_high >> j) & 1)
+				bit_cnt ^= (high >> j) & 1;
+			if ((mask_low >> j) & 1)
+				bit_cnt ^= (low >> j) & 1;
+		}
+
+		ecc |= bit_cnt << i;
+	}
+
+	return ecc;
+}
+
+/*
+ * Create the syndrome code which is generated if the data line specified by
+ * 'bit' failed.  Eg generate an 8-bit codes seen in Table 8-55 in the MPC8641
+ * User's Manual and 9-61 in the MPC8572 User's Manual.
+ */
+static u8 syndrome_from_bit(unsigned int bit) {
+	int i;
+	u8 syndrome = 0;
+
+	/*
+	 * Cycle through the upper or lower 32-bit portion of each value in
+	 * ecc_table depending on if 'bit' is in the upper or lower half of
+	 * 64-bit data.
+	 */
+	for (i = bit < 32; i < 16; i += 2)
+		syndrome |= ((ecc_table[i] >> (bit % 32)) & 1) << (i / 2);
+
+	return syndrome;
+}
+
+/*
+ * Decode data and ecc syndrome to determine what went wrong
+ * Note: This can only decode single-bit errors
+ */
+static void sbe_ecc_decode(u32 cap_high, u32 cap_low, u32 cap_ecc,
+		       int *bad_data_bit, int *bad_ecc_bit)
+{
+	int i;
+	u8 syndrome;
+
+	*bad_data_bit = -1;
+	*bad_ecc_bit = -1;
+
+	/*
+	 * Calculate the ECC of the captured data and XOR it with the captured
+	 * ECC to find an ECC syndrome value we can search for
+	 */
+	syndrome = calculate_ecc(cap_high, cap_low) ^ cap_ecc;
+
+	/* Check if a data line is stuck... */
+	for (i = 0; i < 64; i++) {
+		if (syndrome == syndrome_from_bit(i)) {
+			*bad_data_bit = i;
+			return;
+		}
+	}
+
+	/* If data is correct, check ECC bits for errors... */
+	for (i = 0; i < 8; i++) {
+		if ((syndrome >> i) & 0x1) {
+			*bad_ecc_bit = i;
+			return;
+		}
+	}
+}
+
 static void mpc85xx_mc_check(struct mem_ctl_info *mci)
 {
 	struct mpc85xx_mc_pdata *pdata = mci->pvt_info;
 	struct csrow_info *csrow;
+	u32 bus_width;
 	u32 err_detect;
 	u32 syndrome;
 	u32 err_addr;
 	u32 pfn;
 	int row_index;
+	u32 cap_high;
+	u32 cap_low;
+	int bad_data_bit;
+	int bad_ecc_bit;
 
 	err_detect = in_be32(pdata->mc_vbase + MPC85XX_MC_ERR_DETECT);
 	if (!err_detect)
@@ -692,6 +801,15 @@ static void mpc85xx_mc_check(struct mem_ctl_info *mci)
 	}
 
 	syndrome = in_be32(pdata->mc_vbase + MPC85XX_MC_CAPTURE_ECC);
+
+	/* Mask off appropriate bits of syndrome based on bus width */
+	bus_width = (in_be32(pdata->mc_vbase + MPC85XX_MC_DDR_SDRAM_CFG) &
+			DSC_DBW_MASK) ? 32 : 64;
+	if (bus_width == 64)
+		syndrome &= 0xff;
+	else
+		syndrome &= 0xffff;
+
 	err_addr = in_be32(pdata->mc_vbase + MPC85XX_MC_CAPTURE_ADDRESS);
 	pfn = err_addr >> PAGE_SHIFT;
 
@@ -701,14 +819,35 @@ static void mpc85xx_mc_check(struct mem_ctl_info *mci)
 			break;
 	}
 
-	mpc85xx_mc_printk(mci, KERN_ERR, "Capture Data High: %#8.8x\n",
-			  in_be32(pdata->mc_vbase +
-				  MPC85XX_MC_CAPTURE_DATA_HI));
-	mpc85xx_mc_printk(mci, KERN_ERR, "Capture Data Low: %#8.8x\n",
-			  in_be32(pdata->mc_vbase +
-				  MPC85XX_MC_CAPTURE_DATA_LO));
-	mpc85xx_mc_printk(mci, KERN_ERR, "syndrome: %#8.8x\n", syndrome);
-	mpc85xx_mc_printk(mci, KERN_ERR, "err addr: %#8.8x\n", err_addr);
+	cap_high = in_be32(pdata->mc_vbase + MPC85XX_MC_CAPTURE_DATA_HI);
+	cap_low = in_be32(pdata->mc_vbase + MPC85XX_MC_CAPTURE_DATA_LO);
+
+	/*
+	 * Analyze single-bit errors on 64-bit wide buses
+	 * TODO: Add support for 32-bit wide buses
+	 */
+	if ((err_detect & DDR_EDE_SBE) && (bus_width == 64)) {
+		sbe_ecc_decode(cap_high, cap_low, syndrome,
+				&bad_data_bit, &bad_ecc_bit);
+
+		if (bad_data_bit != -1)
+			mpc85xx_mc_printk(mci, KERN_ERR,
+				"Faulty Data bit: %d\n", bad_data_bit);
+		if (bad_ecc_bit != -1)
+			mpc85xx_mc_printk(mci, KERN_ERR,
+				"Faulty ECC bit: %d\n", bad_ecc_bit);
+
+		mpc85xx_mc_printk(mci, KERN_ERR,
+			"Expected Data / ECC:\t%#8.8x_%08x / %#2.2x\n",
+			cap_high ^ (1 << (bad_data_bit - 32)),
+			cap_low ^ (1 << bad_data_bit),
+			syndrome ^ (1 << bad_ecc_bit));
+	}
+
+	mpc85xx_mc_printk(mci, KERN_ERR,
+			"Captured Data / ECC:\t%#8.8x_%08x / %#2.2x\n",
+			cap_high, cap_low, syndrome);
+	mpc85xx_mc_printk(mci, KERN_ERR, "Err addr: %#8.8x\n", err_addr);
 	mpc85xx_mc_printk(mci, KERN_ERR, "PFN: %#8.8x\n", pfn);
 
 	/* we are out of range */
diff --git a/drivers/edac/mpc85xx_edac.h b/drivers/edac/mpc85xx_edac.h
index 52432ee7c4b9..cb24df839460 100644
--- a/drivers/edac/mpc85xx_edac.h
+++ b/drivers/edac/mpc85xx_edac.h
@@ -48,6 +48,9 @@
 #define DSC_MEM_EN	0x80000000
 #define DSC_ECC_EN	0x20000000
 #define DSC_RD_EN	0x10000000
+#define DSC_DBW_MASK	0x00180000
+#define DSC_DBW_32	0x00080000
+#define DSC_DBW_64	0x00000000
 
 #define DSC_SDTYPE_MASK		0x07000000
 
diff --git a/drivers/firewire/core-device.c b/drivers/firewire/core-device.c
index 014cabd3afda..5db0518c66da 100644
--- a/drivers/firewire/core-device.c
+++ b/drivers/firewire/core-device.c
@@ -33,7 +33,6 @@
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/rwsem.h>
-#include <linux/semaphore.h>
 #include <linux/spinlock.h>
 #include <linux/string.h>
 #include <linux/workqueue.h>
@@ -828,9 +827,9 @@ static int update_unit(struct device *dev, void *data)
 	struct fw_driver *driver = (struct fw_driver *)dev->driver;
 
 	if (is_fw_unit(dev) && driver != NULL && driver->update != NULL) {
-		down(&dev->sem);
+		device_lock(dev);
 		driver->update(unit);
-		up(&dev->sem);
+		device_unlock(dev);
 	}
 
 	return 0;
diff --git a/drivers/firmware/edd.c b/drivers/firmware/edd.c
index 9e4f59dc7f1e..110e24e50883 100644
--- a/drivers/firmware/edd.c
+++ b/drivers/firmware/edd.c
@@ -122,7 +122,7 @@ edd_attr_show(struct kobject * kobj, struct attribute *attr, char *buf)
 	return ret;
 }
 
-static struct sysfs_ops edd_attr_ops = {
+static const struct sysfs_ops edd_attr_ops = {
 	.show = edd_attr_show,
 };
 
diff --git a/drivers/firmware/efivars.c b/drivers/firmware/efivars.c
index f4f709d1370b..082f06ecd327 100644
--- a/drivers/firmware/efivars.c
+++ b/drivers/firmware/efivars.c
@@ -362,7 +362,7 @@ static ssize_t efivar_attr_store(struct kobject *kobj, struct attribute *attr,
 	return ret;
 }
 
-static struct sysfs_ops efivar_attr_ops = {
+static const struct sysfs_ops efivar_attr_ops = {
 	.show = efivar_attr_show,
 	.store = efivar_attr_store,
 };
diff --git a/drivers/firmware/iscsi_ibft.c b/drivers/firmware/iscsi_ibft.c
index a3600e3ed0fa..ed2801c378de 100644
--- a/drivers/firmware/iscsi_ibft.c
+++ b/drivers/firmware/iscsi_ibft.c
@@ -519,7 +519,7 @@ static ssize_t ibft_show_attribute(struct kobject *kobj,
 	return ret;
 }
 
-static struct sysfs_ops ibft_attr_ops = {
+static const struct sysfs_ops ibft_attr_ops = {
 	.show = ibft_show_attribute,
 };
 
diff --git a/drivers/firmware/memmap.c b/drivers/firmware/memmap.c
index 20f645743ead..d59f7cad2269 100644
--- a/drivers/firmware/memmap.c
+++ b/drivers/firmware/memmap.c
@@ -74,7 +74,7 @@ static struct attribute *def_attrs[] = {
 	NULL
 };
 
-static struct sysfs_ops memmap_attr_ops = {
+static const struct sysfs_ops memmap_attr_ops = {
 	.show = memmap_attr_show,
 };
 
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 9006fdb26fea..6d1b86661e63 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -623,7 +623,9 @@ static const struct attribute_group gpiochip_attr_group = {
  * /sys/class/gpio/unexport ... write-only
  *	integer N ... number of GPIO to unexport
  */
-static ssize_t export_store(struct class *class, const char *buf, size_t len)
+static ssize_t export_store(struct class *class,
+				struct class_attribute *attr,
+				const char *buf, size_t len)
 {
 	long	gpio;
 	int	status;
@@ -653,7 +655,9 @@ done:
 	return status ? : len;
 }
 
-static ssize_t unexport_store(struct class *class, const char *buf, size_t len)
+static ssize_t unexport_store(struct class *class,
+				struct class_attribute *attr,
+				const char *buf, size_t len)
 {
 	long	gpio;
 	int	status;
diff --git a/drivers/gpu/drm/drm_sysfs.c b/drivers/gpu/drm/drm_sysfs.c
index 7e42b7e9d43a..014ce24761b9 100644
--- a/drivers/gpu/drm/drm_sysfs.c
+++ b/drivers/gpu/drm/drm_sysfs.c
@@ -70,19 +70,17 @@ static int drm_class_resume(struct device *dev)
 	return 0;
 }
 
-/* Display the version of drm_core. This doesn't work right in current design */
-static ssize_t version_show(struct class *dev, char *buf)
-{
-	return sprintf(buf, "%s %d.%d.%d %s\n", CORE_NAME, CORE_MAJOR,
-		       CORE_MINOR, CORE_PATCHLEVEL, CORE_DATE);
-}
-
 static char *drm_devnode(struct device *dev, mode_t *mode)
 {
 	return kasprintf(GFP_KERNEL, "dri/%s", dev_name(dev));
 }
 
-static CLASS_ATTR(version, S_IRUGO, version_show, NULL);
+static CLASS_ATTR_STRING(version, S_IRUGO,
+		CORE_NAME " "
+		__stringify(CORE_MAJOR) "."
+		__stringify(CORE_MINOR) "."
+		__stringify(CORE_PATCHLEVEL) " "
+		CORE_DATE);
 
 /**
  * drm_sysfs_create - create a struct drm_sysfs_class structure
@@ -109,7 +107,7 @@ struct class *drm_sysfs_create(struct module *owner, char *name)
 	class->suspend = drm_class_suspend;
 	class->resume = drm_class_resume;
 
-	err = class_create_file(class, &class_attr_version);
+	err = class_create_file(class, &class_attr_version.attr);
 	if (err)
 		goto err_out_class;
 
@@ -132,7 +130,7 @@ void drm_sysfs_destroy(void)
 {
 	if ((drm_class == NULL) || (IS_ERR(drm_class)))
 		return;
-	class_remove_file(drm_class, &class_attr_version);
+	class_remove_file(drm_class, &class_attr_version.attr);
 	class_destroy(drm_class);
 }
 
diff --git a/drivers/gpu/drm/nouveau/nouveau_backlight.c b/drivers/gpu/drm/nouveau/nouveau_backlight.c
index 20564f8cb0ec..406228f4a2a0 100644
--- a/drivers/gpu/drm/nouveau/nouveau_backlight.c
+++ b/drivers/gpu/drm/nouveau/nouveau_backlight.c
@@ -89,19 +89,21 @@ static struct backlight_ops nv50_bl_ops = {
 
 static int nouveau_nv40_backlight_init(struct drm_device *dev)
 {
+	struct backlight_properties props;
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	struct backlight_device *bd;
 
 	if (!(nv_rd32(dev, NV40_PMC_BACKLIGHT) & NV40_PMC_BACKLIGHT_MASK))
 		return 0;
 
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.max_brightness = 31;
 	bd = backlight_device_register("nv_backlight", &dev->pdev->dev, dev,
-				       &nv40_bl_ops);
+				       &nv40_bl_ops, &props);
 	if (IS_ERR(bd))
 		return PTR_ERR(bd);
 
 	dev_priv->backlight = bd;
-	bd->props.max_brightness = 31;
 	bd->props.brightness = nv40_get_intensity(bd);
 	backlight_update_status(bd);
 
@@ -110,19 +112,21 @@ static int nouveau_nv40_backlight_init(struct drm_device *dev)
 
 static int nouveau_nv50_backlight_init(struct drm_device *dev)
 {
+	struct backlight_properties props;
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	struct backlight_device *bd;
 
 	if (!nv_rd32(dev, NV50_PDISPLAY_SOR_BACKLIGHT))
 		return 0;
 
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.max_brightness = 1025;
 	bd = backlight_device_register("nv_backlight", &dev->pdev->dev, dev,
-				       &nv50_bl_ops);
+				       &nv50_bl_ops, &props);
 	if (IS_ERR(bd))
 		return PTR_ERR(bd);
 
 	dev_priv->backlight = bd;
-	bd->props.max_brightness = 1025;
 	bd->props.brightness = nv50_get_intensity(bd);
 	backlight_update_status(bd);
 	return 0;
diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c
index 71247da17da5..75bceee76044 100644
--- a/drivers/gpu/drm/nouveau/nouveau_bios.c
+++ b/drivers/gpu/drm/nouveau/nouveau_bios.c
@@ -3545,7 +3545,7 @@ int nouveau_bios_parse_lvds_table(struct drm_device *dev, int pxclk, bool *dl, b
 	 * at which modes should be set up in the dual link style.
 	 *
 	 * Following the header, the BMP (ver 0xa) table has several records,
-	 * indexed by a seperate xlat table, indexed in turn by the fp strap in
+	 * indexed by a separate xlat table, indexed in turn by the fp strap in
 	 * EXTDEV_BOOT. Each record had a config byte, followed by 6 script
 	 * numbers for use by INIT_SUB which controlled panel init and power,
 	 * and finally a dword of ms to sleep between power off and on
diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h
index 5f8d987af363..4b9aaf2a8d0f 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drv.h
+++ b/drivers/gpu/drm/nouveau/nouveau_drv.h
@@ -553,7 +553,7 @@ struct drm_nouveau_private {
 	uint32_t ramro_offset;
 	uint32_t ramro_size;
 
-	/* base physical adresses */
+	/* base physical addresses */
 	uint64_t fb_phys;
 	uint64_t fb_available_size;
 	uint64_t fb_mappable_pages;
diff --git a/drivers/gpu/drm/radeon/radeon_state.c b/drivers/gpu/drm/radeon/radeon_state.c
index 3c32f840dcd2..40ab6d9c3736 100644
--- a/drivers/gpu/drm/radeon/radeon_state.c
+++ b/drivers/gpu/drm/radeon/radeon_state.c
@@ -1093,7 +1093,7 @@ static void radeon_cp_dispatch_clear(struct drm_device * dev,
 					/* judging by the first tile offset needed, could possibly
 					   directly address/clear 4x4 tiles instead of 8x2 * 4x4
 					   macro tiles, though would still need clear mask for
-					   right/bottom if truely 4x4 granularity is desired ? */
+					   right/bottom if truly 4x4 granularity is desired ? */
 					OUT_RING(tileoffset * 16);
 					/* the number of tiles to clear */
 					OUT_RING(nrtilesx + 1);
diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c
index c7320ce4567d..89c38c49066f 100644
--- a/drivers/gpu/drm/ttm/ttm_bo.c
+++ b/drivers/gpu/drm/ttm/ttm_bo.c
@@ -128,7 +128,7 @@ static struct attribute *ttm_bo_global_attrs[] = {
 	NULL
 };
 
-static struct sysfs_ops ttm_bo_global_ops = {
+static const struct sysfs_ops ttm_bo_global_ops = {
 	.show = &ttm_bo_global_show
 };
 
diff --git a/drivers/gpu/drm/ttm/ttm_memory.c b/drivers/gpu/drm/ttm/ttm_memory.c
index f5245c02b8fd..eb143e04d402 100644
--- a/drivers/gpu/drm/ttm/ttm_memory.c
+++ b/drivers/gpu/drm/ttm/ttm_memory.c
@@ -152,7 +152,7 @@ static struct attribute *ttm_mem_zone_attrs[] = {
 	NULL
 };
 
-static struct sysfs_ops ttm_mem_zone_ops = {
+static const struct sysfs_ops ttm_mem_zone_ops = {
 	.show = &ttm_mem_zone_show,
 	.store = &ttm_mem_zone_store
 };
diff --git a/drivers/gpu/drm/via/via_irq.c b/drivers/gpu/drm/via/via_irq.c
index 5935b8842e86..34079f251cd4 100644
--- a/drivers/gpu/drm/via/via_irq.c
+++ b/drivers/gpu/drm/via/via_irq.c
@@ -150,7 +150,7 @@ irqreturn_t via_driver_irq_handler(DRM_IRQ_ARGS)
 		cur_irq++;
 	}
 
-	/* Acknowlege interrupts */
+	/* Acknowledge interrupts */
 	VIA_WRITE(VIA_REG_INTERRUPT, status);
 
 
@@ -165,7 +165,7 @@ static __inline__ void viadrv_acknowledge_irqs(drm_via_private_t * dev_priv)
 	u32 status;
 
 	if (dev_priv) {
-		/* Acknowlege interrupts */
+		/* Acknowledge interrupts */
 		status = VIA_READ(VIA_REG_INTERRUPT);
 		VIA_WRITE(VIA_REG_INTERRUPT, status |
 			  dev_priv->irq_pending_mask);
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 368fbb0c4ca6..2e2aa759d230 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1357,6 +1357,7 @@ static const struct hid_device_id hid_blacklist[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb323) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb324) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb651) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb653) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED, USB_DEVICE_ID_TOPSEED_CYBERLINK) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_TWINHAN, USB_DEVICE_ID_TWINHAN_IR_REMOTE) },
diff --git a/drivers/hid/hid-debug.c b/drivers/hid/hid-debug.c
index cd4ece6fdfb9..0c4e75573186 100644
--- a/drivers/hid/hid-debug.c
+++ b/drivers/hid/hid-debug.c
@@ -564,10 +564,10 @@ void hid_debug_event(struct hid_device *hdev, char *buf)
 	struct hid_debug_list *list;
 
 	list_for_each_entry(list, &hdev->debug_list, node) {
-		for (i = 0; i <= strlen(buf); i++)
-			list->hid_debug_buf[(list->tail + i) % (HID_DEBUG_BUFSIZE - 1)] =
+		for (i = 0; i < strlen(buf); i++)
+			list->hid_debug_buf[(list->tail + i) % HID_DEBUG_BUFSIZE] =
 				buf[i];
-		list->tail = (list->tail + i) % (HID_DEBUG_BUFSIZE - 1);
+		list->tail = (list->tail + i) % HID_DEBUG_BUFSIZE;
         }
 }
 EXPORT_SYMBOL_GPL(hid_debug_event);
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 72c05f90553c..797e06470356 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -445,6 +445,7 @@
 
 #define USB_VENDOR_ID_UCLOGIC		0x5543
 #define USB_DEVICE_ID_UCLOGIC_TABLET_PF1209	0x0042
+#define USB_DEVICE_ID_UCLOGIC_TABLET_WP4030U	0x0003
 
 #define USB_VENDOR_ID_VERNIER		0x08f7
 #define USB_DEVICE_ID_VERNIER_LABPRO	0x0001
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index 79d9edd0bdfa..7a0d2e4661a1 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -68,22 +68,25 @@ static const struct {
 #define map_key_clear(c)	hid_map_usage_clear(hidinput, usage, &bit, \
 		&max, EV_KEY, (c))
 
-static inline int match_scancode(int code, int scancode)
+static inline int match_scancode(unsigned int code, unsigned int scancode)
 {
 	if (scancode == 0)
 		return 1;
-	return ((code & (HID_USAGE_PAGE | HID_USAGE)) == scancode);
+
+	return (code & (HID_USAGE_PAGE | HID_USAGE)) == scancode;
 }
 
-static inline int match_keycode(int code, int keycode)
+static inline int match_keycode(unsigned int code, unsigned int keycode)
 {
 	if (keycode == 0)
 		return 1;
-	return (code == keycode);
+
+	return code == keycode;
 }
 
 static struct hid_usage *hidinput_find_key(struct hid_device *hid,
-		int scancode, int keycode)
+					   unsigned int scancode,
+					   unsigned int keycode)
 {
 	int i, j, k;
 	struct hid_report *report;
@@ -105,8 +108,8 @@ static struct hid_usage *hidinput_find_key(struct hid_device *hid,
 	return NULL;
 }
 
-static int hidinput_getkeycode(struct input_dev *dev, int scancode,
-				int *keycode)
+static int hidinput_getkeycode(struct input_dev *dev,
+			       unsigned int scancode, unsigned int *keycode)
 {
 	struct hid_device *hid = input_get_drvdata(dev);
 	struct hid_usage *usage;
@@ -119,16 +122,13 @@ static int hidinput_getkeycode(struct input_dev *dev, int scancode,
 	return -EINVAL;
 }
 
-static int hidinput_setkeycode(struct input_dev *dev, int scancode,
-				int keycode)
+static int hidinput_setkeycode(struct input_dev *dev,
+			       unsigned int scancode, unsigned int keycode)
 {
 	struct hid_device *hid = input_get_drvdata(dev);
 	struct hid_usage *usage;
 	int old_keycode;
 
-	if (keycode < 0 || keycode > KEY_MAX)
-		return -EINVAL;
-
 	usage = hidinput_find_key(hid, scancode, 0);
 	if (usage) {
 		old_keycode = usage->code;
diff --git a/drivers/hid/hid-magicmouse.c b/drivers/hid/hid-magicmouse.c
index 4a3a94f2b10c..c174b64c3810 100644
--- a/drivers/hid/hid-magicmouse.c
+++ b/drivers/hid/hid-magicmouse.c
@@ -353,7 +353,7 @@ static int magicmouse_probe(struct hid_device *hdev,
 		goto err_free;
 	}
 
-	ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+	ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT & ~HID_CONNECT_HIDINPUT);
 	if (ret) {
 		dev_err(&hdev->dev, "magicmouse hw start failed\n");
 		goto err_free;
@@ -409,8 +409,11 @@ err_free:
 
 static void magicmouse_remove(struct hid_device *hdev)
 {
+	struct magicmouse_sc *msc = hid_get_drvdata(hdev);
+
 	hid_hw_stop(hdev);
-	kfree(hid_get_drvdata(hdev));
+	input_unregister_device(msc->input);
+	kfree(msc);
 }
 
 static const struct hid_device_id magic_mice[] = {
diff --git a/drivers/hid/hid-ntrig.c b/drivers/hid/hid-ntrig.c
index 3234c729a895..edcc0c4247bb 100644
--- a/drivers/hid/hid-ntrig.c
+++ b/drivers/hid/hid-ntrig.c
@@ -140,6 +140,9 @@ static int ntrig_event (struct hid_device *hid, struct hid_field *field,
 			nd->reading_mt = 1;
 			nd->first_contact_confidence = 0;
 			break;
+		case HID_DG_TIPSWITCH:
+			/* Prevent emission of touch until validated */
+			return 1;
 		case HID_DG_CONFIDENCE:
 			nd->confidence = value;
 			break;
@@ -259,6 +262,7 @@ static int ntrig_event (struct hid_device *hid, struct hid_field *field,
 						BTN_TOOL_TRIPLETAP, 0);
 				input_report_key(input,
 						BTN_TOOL_QUADTAP, 0);
+				input_report_key(input, BTN_TOUCH, 0);
 			}
 			break;
 
@@ -308,13 +312,20 @@ static int ntrig_probe(struct hid_device *hdev, const struct hid_device_id *id)
 
 
 	list_for_each_entry(hidinput, &hdev->inputs, list) {
+		if (hidinput->report->maxfield < 1)
+			continue;
+
 		input = hidinput->input;
 		switch (hidinput->report->field[0]->application) {
 		case HID_DG_PEN:
 			input->name = "N-Trig Pen";
 			break;
 		case HID_DG_TOUCHSCREEN:
+			/* These keys are redundant for fingers, clear them
+			 * to prevent incorrect identification */
 			__clear_bit(BTN_TOOL_PEN, input->keybit);
+			__clear_bit(BTN_TOOL_FINGER, input->keybit);
+			__clear_bit(BTN_0, input->keybit);
 			/*
 			 * A little something special to enable
 			 * two and three finger taps.
diff --git a/drivers/hid/hid-tmff.c b/drivers/hid/hid-tmff.c
index 167ea746fb9c..c32f32c84ac8 100644
--- a/drivers/hid/hid-tmff.c
+++ b/drivers/hid/hid-tmff.c
@@ -251,6 +251,8 @@ static const struct hid_device_id tm_devices[] = {
 		.driver_data = (unsigned long)ff_rumble },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb651),	/* FGT Rumble Force Wheel */
 		.driver_data = (unsigned long)ff_rumble },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb653),	/* RGT Force Feedback CLUTCH Raging Wheel */
+		.driver_data = (unsigned long)ff_joystick },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654),	/* FGT Force Feedback Wheel */
 		.driver_data = (unsigned long)ff_joystick },
 	{ }
diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index 7844280897d1..928943c7ce9a 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -63,6 +63,7 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_SUN, USB_DEVICE_ID_RARITAN_KVM_DONGLE, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_TURBOX, USB_DEVICE_ID_TURBOX_KEYBOARD, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_PF1209, HID_QUIRK_MULTI_INPUT },
+	{ USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_WP4030U, HID_QUIRK_MULTI_INPUT },
 	{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_DUAL_USB_JOYPAD, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT | HID_QUIRK_SKIP_OUTPUT_REPORTS },
 	{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_QUAD_USB_JOYPAD, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT },
 
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 02ce9cff5fcf..d06083fdffbb 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -73,7 +73,6 @@ config I2C_SMBUS
 
 source drivers/i2c/algos/Kconfig
 source drivers/i2c/busses/Kconfig
-source drivers/i2c/chips/Kconfig
 
 config I2C_DEBUG_CORE
 	bool "I2C Core debugging messages"
@@ -98,12 +97,4 @@ config I2C_DEBUG_BUS
 	  a problem with I2C support and want to see more of what is going
 	  on.
 
-config I2C_DEBUG_CHIP
-	bool "I2C Chip debugging messages"
-	help
-	  Say Y here if you want the I2C chip drivers to produce a bunch of
-	  debug messages to the system log.  Select this if you are having
-	  a problem with I2C support and want to see more of what is going
-	  on.
-
 endif # I2C
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index acd0250c16a0..a7d9b4be9bb3 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -6,7 +6,7 @@ obj-$(CONFIG_I2C_BOARDINFO)	+= i2c-boardinfo.o
 obj-$(CONFIG_I2C)		+= i2c-core.o
 obj-$(CONFIG_I2C_SMBUS)		+= i2c-smbus.o
 obj-$(CONFIG_I2C_CHARDEV)	+= i2c-dev.o
-obj-y				+= busses/ chips/ algos/
+obj-y				+= algos/ busses/
 
 ifeq ($(CONFIG_I2C_DEBUG_CORE),y)
 EXTRA_CFLAGS += -DDEBUG
diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c
index e25e13980af3..e8d568c3fb09 100644
--- a/drivers/i2c/algos/i2c-algo-bit.c
+++ b/drivers/i2c/algos/i2c-algo-bit.c
@@ -522,6 +522,12 @@ static int bit_xfer(struct i2c_adapter *i2c_adap,
 	int i, ret;
 	unsigned short nak_ok;
 
+	if (adap->pre_xfer) {
+		ret = adap->pre_xfer(i2c_adap);
+		if (ret < 0)
+			return ret;
+	}
+
 	bit_dbg(3, &i2c_adap->dev, "emitting start condition\n");
 	i2c_start(adap);
 	for (i = 0; i < num; i++) {
@@ -570,6 +576,9 @@ static int bit_xfer(struct i2c_adapter *i2c_adap,
 bailout:
 	bit_dbg(3, &i2c_adap->dev, "emitting stop condition\n");
 	i2c_stop(adap);
+
+	if (adap->post_xfer)
+		adap->post_xfer(i2c_adap);
 	return ret;
 }
 
diff --git a/drivers/i2c/algos/i2c-algo-pcf.c b/drivers/i2c/algos/i2c-algo-pcf.c
index 7ce75775ec73..6b6bd06202b2 100644
--- a/drivers/i2c/algos/i2c-algo-pcf.c
+++ b/drivers/i2c/algos/i2c-algo-pcf.c
@@ -176,7 +176,7 @@ static int pcf_init_8584 (struct i2c_algo_pcf_data *adap)
 	 */
 	if (((temp = get_pcf(adap, 1)) & 0x7f) != (0)) {
 		DEB2(printk(KERN_ERR "i2c-algo-pcf.o: PCF detection failed -- can't select S0 (0x%02x).\n", temp));
-		return -ENXIO; /* definetly not PCF8584 */
+		return -ENXIO; /* definitely not PCF8584 */
 	}
 
 	/* load own address in S0, effective address is (own << 1) */
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 9da5b05cdb52..299b918455a3 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -416,9 +416,11 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
 		data->block[0] = 32;	/* max for SMBus block reads */
 	}
 
+	/* Experience has shown that the block buffer can only be used for
+	   SMBus (not I2C) block transactions, even though the datasheet
+	   doesn't mention this limitation. */
 	if ((i801_features & FEATURE_BLOCK_BUFFER)
-	 && !(command == I2C_SMBUS_I2C_BLOCK_DATA
-	      && read_write == I2C_SMBUS_READ)
+	 && command != I2C_SMBUS_I2C_BLOCK_DATA
 	 && i801_set_block_buffer_mode() == 0)
 		result = i801_block_transaction_by_block(data, read_write,
 							 hwpec);
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 913abd7c172f..c7c237537f81 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -850,7 +850,7 @@ static const struct i2c_algorithm omap_i2c_algo = {
 	.functionality	= omap_i2c_func,
 };
 
-static int __init
+static int __devinit
 omap_i2c_probe(struct platform_device *pdev)
 {
 	struct omap_i2c_dev	*dev;
diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c
index 1c440a70ec61..b289ec99eeba 100644
--- a/drivers/i2c/busses/i2c-powermac.c
+++ b/drivers/i2c/busses/i2c-powermac.c
@@ -122,9 +122,14 @@ static s32 i2c_powermac_smbus_xfer(	struct i2c_adapter*	adap,
 
 	rc = pmac_i2c_xfer(bus, addrdir, subsize, subaddr, buf, len);
 	if (rc) {
-		dev_err(&adap->dev,
-			"I2C transfer at 0x%02x failed, size %d, err %d\n",
-			addrdir >> 1, size, rc);
+		if (rc == -ENXIO)
+			dev_dbg(&adap->dev,
+				"I2C transfer at 0x%02x failed, size %d, "
+				"err %d\n", addrdir >> 1, size, rc);
+		else
+			dev_err(&adap->dev,
+				"I2C transfer at 0x%02x failed, size %d, "
+				"err %d\n", addrdir >> 1, size, rc);
 		goto bail;
 	}
 
@@ -175,10 +180,16 @@ static int i2c_powermac_master_xfer(	struct i2c_adapter *adap,
 		goto bail;
 	}
 	rc = pmac_i2c_xfer(bus, addrdir, 0, 0, msgs->buf, msgs->len);
-	if (rc < 0)
-		dev_err(&adap->dev, "I2C %s 0x%02x failed, err %d\n",
-			addrdir & 1 ? "read from" : "write to", addrdir >> 1,
-			rc);
+	if (rc < 0) {
+		if (rc == -ENXIO)
+			dev_dbg(&adap->dev, "I2C %s 0x%02x failed, err %d\n",
+				addrdir & 1 ? "read from" : "write to",
+				addrdir >> 1, rc);
+		else
+			dev_err(&adap->dev, "I2C %s 0x%02x failed, err %d\n",
+				addrdir & 1 ? "read from" : "write to",
+				addrdir >> 1, rc);
+	}
  bail:
 	pmac_i2c_close(bus);
 	return rc < 0 ? rc : 1;
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index 7647a20523a0..90ffbf6f9d4f 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -12,7 +12,7 @@
  *
  *  History:
  *    Apr 2002: Initial version [CS]
- *    Jun 2002: Properly seperated algo/adap [FB]
+ *    Jun 2002: Properly separated algo/adap [FB]
  *    Jan 2003: Fixed several bugs concerning interrupt handling [Kai-Uwe Bloem]
  *    Jan 2003: added limited signal handling [Kai-Uwe Bloem]
  *    Sep 2004: Major rework to ensure efficient bus handling [RMK]
diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index eece39a5a30e..f0ef8da6c554 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -32,6 +32,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/errno.h>
+#include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
deleted file mode 100644
index ae4539d99bef..000000000000
--- a/drivers/i2c/chips/Kconfig
+++ /dev/null
@@ -1,19 +0,0 @@
-#
-# Miscellaneous I2C chip drivers configuration
-#
-# *** DEPRECATED! Do not add new entries! See Makefile ***
-#
-
-menu "Miscellaneous I2C Chip support"
-
-config SENSORS_TSL2550
-	tristate "Taos TSL2550 ambient light sensor"
-	depends on EXPERIMENTAL
-	help
-	  If you say yes here you get support for the Taos TSL2550
-	  ambient light sensor.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called tsl2550.
-
-endmenu
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
deleted file mode 100644
index fe0af0f81f2d..000000000000
--- a/drivers/i2c/chips/Makefile
+++ /dev/null
@@ -1,18 +0,0 @@
-#
-# Makefile for miscellaneous I2C chip drivers.
-#
-# Do not add new drivers to this directory! It is DEPRECATED.
-#
-# Device drivers are better grouped according to the functionality they
-# implement rather than to the bus they are connected to. In particular:
-# * Hardware monitoring chip drivers go to drivers/hwmon
-# * RTC chip drivers go to drivers/rtc
-# * I/O expander drivers go to drivers/gpio
-#
-
-obj-$(CONFIG_SENSORS_TSL2550)	+= tsl2550.o
-
-ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
-EXTRA_CFLAGS += -DDEBUG
-endif
-
diff --git a/drivers/i2c/i2c-smbus.c b/drivers/i2c/i2c-smbus.c
index 421278221243..7a8201ed2181 100644
--- a/drivers/i2c/i2c-smbus.c
+++ b/drivers/i2c/i2c-smbus.c
@@ -22,7 +22,6 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/device.h>
-#include <linux/semaphore.h>
 #include <linux/interrupt.h>
 #include <linux/workqueue.h>
 #include <linux/i2c.h>
@@ -55,7 +54,7 @@ static int smbus_do_alert(struct device *dev, void *addrp)
 	 * Drivers should either disable alerts, or provide at least
 	 * a minimal handler.  Lock so client->driver won't change.
 	 */
-	down(&dev->sem);
+	device_lock(dev);
 	if (client->driver) {
 		if (client->driver->alert)
 			client->driver->alert(client, data->flag);
@@ -63,7 +62,7 @@ static int smbus_do_alert(struct device *dev, void *addrp)
 			dev_warn(&client->dev, "no driver alert()!\n");
 	} else
 		dev_dbg(&client->dev, "alert with no driver\n");
-	up(&dev->sem);
+	device_unlock(dev);
 
 	/* Stop iterating after we find the device */
 	return -EBUSY;
diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c
index 5122b5a8aa2d..18350213479e 100644
--- a/drivers/ieee1394/nodemgr.c
+++ b/drivers/ieee1394/nodemgr.c
@@ -19,7 +19,6 @@
 #include <linux/moduleparam.h>
 #include <linux/mutex.h>
 #include <linux/freezer.h>
-#include <linux/semaphore.h>
 #include <asm/atomic.h>
 
 #include "csr.h"
@@ -1397,9 +1396,9 @@ static int update_pdrv(struct device *dev, void *data)
 			pdrv = container_of(drv, struct hpsb_protocol_driver,
 					    driver);
 			if (pdrv->update) {
-				down(&ud->device.sem);
+				device_lock(&ud->device);
 				error = pdrv->update(ud);
-				up(&ud->device.sem);
+				device_unlock(&ud->device);
 			}
 			if (error)
 				device_release_driver(&ud->device);
diff --git a/drivers/ieee1394/pcilynx.c b/drivers/ieee1394/pcilynx.c
index 9555fd253865..bf47fee79808 100644
--- a/drivers/ieee1394/pcilynx.c
+++ b/drivers/ieee1394/pcilynx.c
@@ -1452,7 +1452,7 @@ static int __devinit add_card(struct pci_dev *dev,
                                 PRINT(KERN_ERR, lynx->id, "unable to read bus info block from i2c");
                         } else {
                                 PRINT(KERN_INFO, lynx->id, "got bus info block from serial eeprom");
-				/* FIXME: probably we shoud rewrite the max_rec, max_ROM(1394a),
+				/* FIXME: probably we should rewrite the max_rec, max_ROM(1394a),
 				 * generation(1394a) and link_spd(1394a) field and recalculate
 				 * the CRC */
 
diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c
index 5130fc55b8e2..764787ebe8d8 100644
--- a/drivers/infiniband/core/cm.c
+++ b/drivers/infiniband/core/cm.c
@@ -3597,7 +3597,7 @@ static ssize_t cm_show_counter(struct kobject *obj, struct attribute *attr,
 		       atomic_long_read(&group->counter[cm_attr->index]));
 }
 
-static struct sysfs_ops cm_counter_ops = {
+static const struct sysfs_ops cm_counter_ops = {
 	.show = cm_show_counter
 };
 
diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c
index 58463da814d1..e351b1548535 100644
--- a/drivers/infiniband/core/mad.c
+++ b/drivers/infiniband/core/mad.c
@@ -2953,6 +2953,9 @@ static void ib_mad_remove_device(struct ib_device *device)
 {
 	int i, num_ports, cur_port;
 
+	if (rdma_node_get_transport(device->node_type) != RDMA_TRANSPORT_IB)
+		return;
+
 	if (device->node_type == RDMA_NODE_IB_SWITCH) {
 		num_ports = 1;
 		cur_port = 0;
diff --git a/drivers/infiniband/core/sysfs.c b/drivers/infiniband/core/sysfs.c
index 158a214da2f7..f901957abc8b 100644
--- a/drivers/infiniband/core/sysfs.c
+++ b/drivers/infiniband/core/sysfs.c
@@ -79,7 +79,7 @@ static ssize_t port_attr_show(struct kobject *kobj,
 	return port_attr->show(p, port_attr, buf);
 }
 
-static struct sysfs_ops port_sysfs_ops = {
+static const struct sysfs_ops port_sysfs_ops = {
 	.show = port_attr_show
 };
 
@@ -461,6 +461,7 @@ alloc_group_attrs(ssize_t (*show)(struct ib_port *,
 		element->attr.attr.mode  = S_IRUGO;
 		element->attr.show       = show;
 		element->index		 = i;
+		sysfs_attr_init(&element->attr.attr);
 
 		tab_attr[i] = &element->attr.attr;
 	}
diff --git a/drivers/infiniband/core/ucm.c b/drivers/infiniband/core/ucm.c
index 1b09b735c5a8..017d6e24448f 100644
--- a/drivers/infiniband/core/ucm.c
+++ b/drivers/infiniband/core/ucm.c
@@ -1336,11 +1336,8 @@ static void ib_ucm_remove_one(struct ib_device *device)
 	device_unregister(&ucm_dev->dev);
 }
 
-static ssize_t show_abi_version(struct class *class, char *buf)
-{
-	return sprintf(buf, "%d\n", IB_USER_CM_ABI_VERSION);
-}
-static CLASS_ATTR(abi_version, S_IRUGO, show_abi_version, NULL);
+static CLASS_ATTR_STRING(abi_version, S_IRUGO,
+			 __stringify(IB_USER_CM_ABI_VERSION));
 
 static int __init ib_ucm_init(void)
 {
@@ -1353,7 +1350,7 @@ static int __init ib_ucm_init(void)
 		goto error1;
 	}
 
-	ret = class_create_file(&cm_class, &class_attr_abi_version);
+	ret = class_create_file(&cm_class, &class_attr_abi_version.attr);
 	if (ret) {
 		printk(KERN_ERR "ucm: couldn't create abi_version attribute\n");
 		goto error2;
@@ -1367,7 +1364,7 @@ static int __init ib_ucm_init(void)
 	return 0;
 
 error3:
-	class_remove_file(&cm_class, &class_attr_abi_version);
+	class_remove_file(&cm_class, &class_attr_abi_version.attr);
 error2:
 	unregister_chrdev_region(IB_UCM_BASE_DEV, IB_UCM_MAX_DEVICES);
 error1:
@@ -1377,7 +1374,7 @@ error1:
 static void __exit ib_ucm_cleanup(void)
 {
 	ib_unregister_client(&ucm_client);
-	class_remove_file(&cm_class, &class_attr_abi_version);
+	class_remove_file(&cm_class, &class_attr_abi_version.attr);
 	unregister_chrdev_region(IB_UCM_BASE_DEV, IB_UCM_MAX_DEVICES);
 	if (overflow_maj)
 		unregister_chrdev_region(overflow_maj, IB_UCM_MAX_DEVICES);
diff --git a/drivers/infiniband/core/user_mad.c b/drivers/infiniband/core/user_mad.c
index 02d360cfc2f7..04b585e86cb2 100644
--- a/drivers/infiniband/core/user_mad.c
+++ b/drivers/infiniband/core/user_mad.c
@@ -965,11 +965,8 @@ static ssize_t show_port(struct device *dev, struct device_attribute *attr,
 }
 static DEVICE_ATTR(port, S_IRUGO, show_port, NULL);
 
-static ssize_t show_abi_version(struct class *class, char *buf)
-{
-	return sprintf(buf, "%d\n", IB_USER_MAD_ABI_VERSION);
-}
-static CLASS_ATTR(abi_version, S_IRUGO, show_abi_version, NULL);
+static CLASS_ATTR_STRING(abi_version, S_IRUGO,
+			 __stringify(IB_USER_MAD_ABI_VERSION));
 
 static dev_t overflow_maj;
 static DECLARE_BITMAP(overflow_map, IB_UMAD_MAX_PORTS);
@@ -1194,7 +1191,7 @@ static int __init ib_umad_init(void)
 		goto out_chrdev;
 	}
 
-	ret = class_create_file(umad_class, &class_attr_abi_version);
+	ret = class_create_file(umad_class, &class_attr_abi_version.attr);
 	if (ret) {
 		printk(KERN_ERR "user_mad: couldn't create abi_version attribute\n");
 		goto out_class;
diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c
index 4fa2e6516441..d805cf365c8d 100644
--- a/drivers/infiniband/core/uverbs_main.c
+++ b/drivers/infiniband/core/uverbs_main.c
@@ -691,11 +691,8 @@ static ssize_t show_dev_abi_version(struct device *device,
 }
 static DEVICE_ATTR(abi_version, S_IRUGO, show_dev_abi_version, NULL);
 
-static ssize_t show_abi_version(struct class *class, char *buf)
-{
-	return sprintf(buf, "%d\n", IB_USER_VERBS_ABI_VERSION);
-}
-static CLASS_ATTR(abi_version, S_IRUGO, show_abi_version, NULL);
+static CLASS_ATTR_STRING(abi_version, S_IRUGO,
+			 __stringify(IB_USER_VERBS_ABI_VERSION));
 
 static dev_t overflow_maj;
 static DECLARE_BITMAP(overflow_map, IB_UVERBS_MAX_DEVICES);
@@ -841,7 +838,7 @@ static int __init ib_uverbs_init(void)
 		goto out_chrdev;
 	}
 
-	ret = class_create_file(uverbs_class, &class_attr_abi_version);
+	ret = class_create_file(uverbs_class, &class_attr_abi_version.attr);
 	if (ret) {
 		printk(KERN_ERR "user_verbs: couldn't create abi_version attribute\n");
 		goto out_class;
diff --git a/drivers/infiniband/hw/cxgb3/iwch.c b/drivers/infiniband/hw/cxgb3/iwch.c
index ee1d8b4d4541..63f975f3e30f 100644
--- a/drivers/infiniband/hw/cxgb3/iwch.c
+++ b/drivers/infiniband/hw/cxgb3/iwch.c
@@ -189,6 +189,7 @@ static void close_rnic_dev(struct t3cdev *tdev)
 	list_for_each_entry_safe(dev, tmp, &dev_list, entry) {
 		if (dev->rdev.t3cdev_p == tdev) {
 			dev->rdev.flags = CXIO_ERROR_FATAL;
+			synchronize_net();
 			cancel_delayed_work_sync(&dev->db_drop_task);
 			list_del(&dev->entry);
 			iwch_unregister_device(dev);
@@ -217,6 +218,7 @@ static void iwch_event_handler(struct t3cdev *tdev, u32 evt, u32 port_id)
 	switch (evt) {
 	case OFFLOAD_STATUS_DOWN: {
 		rdev->flags = CXIO_ERROR_FATAL;
+		synchronize_net();
 		event.event  = IB_EVENT_DEVICE_FATAL;
 		dispatch = 1;
 		break;
diff --git a/drivers/infiniband/hw/ehca/ehca_qes.h b/drivers/infiniband/hw/ehca/ehca_qes.h
index 5d28e3e98a20..90c4efa67586 100644
--- a/drivers/infiniband/hw/ehca/ehca_qes.h
+++ b/drivers/infiniband/hw/ehca/ehca_qes.h
@@ -46,7 +46,7 @@
 
 #include "ehca_tools.h"
 
-/* virtual scatter gather entry to specify remote adresses with length */
+/* virtual scatter gather entry to specify remote addresses with length */
 struct ehca_vsgentry {
 	u64 vaddr;
 	u32 lkey;
@@ -148,7 +148,7 @@ struct ehca_wqe {
 	u32 immediate_data;
 	union {
 		struct {
-			u64 remote_virtual_adress;
+			u64 remote_virtual_address;
 			u32 rkey;
 			u32 reserved;
 			u64 atomic_1st_op_dma_len;
diff --git a/drivers/infiniband/hw/ehca/ehca_reqs.c b/drivers/infiniband/hw/ehca/ehca_reqs.c
index e3ec7fdd67bd..9a3fbfca9b41 100644
--- a/drivers/infiniband/hw/ehca/ehca_reqs.c
+++ b/drivers/infiniband/hw/ehca/ehca_reqs.c
@@ -269,7 +269,7 @@ static inline int ehca_write_swqe(struct ehca_qp *qp,
 		/* no break is intentional here */
 	case IB_QPT_RC:
 		/* TODO: atomic not implemented */
-		wqe_p->u.nud.remote_virtual_adress =
+		wqe_p->u.nud.remote_virtual_address =
 			send_wr->wr.rdma.remote_addr;
 		wqe_p->u.nud.rkey = send_wr->wr.rdma.rkey;
 
diff --git a/drivers/infiniband/hw/nes/nes_hw.c b/drivers/infiniband/hw/nes/nes_hw.c
index ce7f53833577..925075557dc2 100644
--- a/drivers/infiniband/hw/nes/nes_hw.c
+++ b/drivers/infiniband/hw/nes/nes_hw.c
@@ -1899,9 +1899,14 @@ void nes_destroy_nic_qp(struct nes_vnic *nesvnic)
 	u16  wqe_fragment_index;
 	u64 wqe_frag;
 	u32 cqp_head;
+	u32 wqm_cfg0;
 	unsigned long flags;
 	int ret;
 
+	/* clear wqe stall before destroying NIC QP */
+	wqm_cfg0 = nes_read_indexed(nesdev, NES_IDX_WQM_CONFIG0);
+	nes_write_indexed(nesdev, NES_IDX_WQM_CONFIG0, wqm_cfg0 & 0xFFFF7FFF);
+
 	/* Free remaining NIC receive buffers */
 	while (nesvnic->nic.rq_head != nesvnic->nic.rq_tail) {
 		nic_rqe   = &nesvnic->nic.rq_vbase[nesvnic->nic.rq_tail];
@@ -2020,6 +2025,9 @@ void nes_destroy_nic_qp(struct nes_vnic *nesvnic)
 
 	pci_free_consistent(nesdev->pcidev, nesvnic->nic_mem_size, nesvnic->nic_vbase,
 			nesvnic->nic_pbase);
+
+	/* restore old wqm_cfg0 value */
+	nes_write_indexed(nesdev, NES_IDX_WQM_CONFIG0, wqm_cfg0);
 }
 
 /**
diff --git a/drivers/infiniband/hw/nes/nes_hw.h b/drivers/infiniband/hw/nes/nes_hw.h
index 9b1e7f869d83..bbbfe9fc5a5a 100644
--- a/drivers/infiniband/hw/nes/nes_hw.h
+++ b/drivers/infiniband/hw/nes/nes_hw.h
@@ -160,6 +160,7 @@ enum indexed_regs {
 	NES_IDX_ENDNODE0_NSTAT_TX_OCTETS_HI = 0x7004,
 	NES_IDX_ENDNODE0_NSTAT_TX_FRAMES_LO = 0x7008,
 	NES_IDX_ENDNODE0_NSTAT_TX_FRAMES_HI = 0x700c,
+	NES_IDX_WQM_CONFIG0 = 0x5000,
 	NES_IDX_WQM_CONFIG1 = 0x5004,
 	NES_IDX_CM_CONFIG = 0x5100,
 	NES_IDX_NIC_LOGPORT_TO_PHYPORT = 0x6000,
diff --git a/drivers/infiniband/hw/nes/nes_nic.c b/drivers/infiniband/hw/nes/nes_nic.c
index a1d79b6856ac..91fdde382e82 100644
--- a/drivers/infiniband/hw/nes/nes_nic.c
+++ b/drivers/infiniband/hw/nes/nes_nic.c
@@ -1595,7 +1595,6 @@ struct net_device *nes_netdev_init(struct nes_device *nesdev,
 	struct nes_vnic *nesvnic;
 	struct net_device *netdev;
 	struct nic_qp_map *curr_qp_map;
-	u32 u32temp;
 	u8 phy_type = nesdev->nesadapter->phy_type[nesdev->mac_index];
 
 	netdev = alloc_etherdev(sizeof(struct nes_vnic));
@@ -1707,6 +1706,10 @@ struct net_device *nes_netdev_init(struct nes_device *nesdev,
 	     ((phy_type == NES_PHY_TYPE_PUMA_1G) &&
 	      (((PCI_FUNC(nesdev->pcidev->devfn) == 1) && (nesdev->mac_index == 2)) ||
 	       ((PCI_FUNC(nesdev->pcidev->devfn) == 2) && (nesdev->mac_index == 1)))))) {
+		u32 u32temp;
+		u32 link_mask;
+		u32 link_val;
+
 		u32temp = nes_read_indexed(nesdev, NES_IDX_PHY_PCS_CONTROL_STATUS0 +
 				(0x200 * (nesdev->mac_index & 1)));
 		if (phy_type != NES_PHY_TYPE_PUMA_1G) {
@@ -1715,13 +1718,36 @@ struct net_device *nes_netdev_init(struct nes_device *nesdev,
 				(0x200 * (nesdev->mac_index & 1)), u32temp);
 		}
 
+		/* Check and set linkup here.  This is for back to back */
+		/* configuration where second port won't get link interrupt */
+		switch (phy_type) {
+		case NES_PHY_TYPE_PUMA_1G:
+			if (nesdev->mac_index < 2) {
+				link_mask = 0x01010000;
+				link_val = 0x01010000;
+			} else {
+				link_mask = 0x02020000;
+				link_val = 0x02020000;
+			}
+			break;
+		default:
+			link_mask = 0x0f1f0000;
+			link_val = 0x0f0f0000;
+			break;
+		}
+
+		u32temp = nes_read_indexed(nesdev,
+					   NES_IDX_PHY_PCS_CONTROL_STATUS0 +
+					   (0x200 * (nesdev->mac_index & 1)));
+		if ((u32temp & link_mask) == link_val)
+			nesvnic->linkup = 1;
+
 		/* clear the MAC interrupt status, assumes direct logical to physical mapping */
 		u32temp = nes_read_indexed(nesdev, NES_IDX_MAC_INT_STATUS + (0x200 * nesdev->mac_index));
 		nes_debug(NES_DBG_INIT, "Phy interrupt status = 0x%X.\n", u32temp);
 		nes_write_indexed(nesdev, NES_IDX_MAC_INT_STATUS + (0x200 * nesdev->mac_index), u32temp);
 
 		nes_init_phy(nesdev);
-
 	}
 
 	return netdev;
diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c
index 815725f886c4..69928296d74b 100644
--- a/drivers/infiniband/hw/nes/nes_verbs.c
+++ b/drivers/infiniband/hw/nes/nes_verbs.c
@@ -1323,6 +1323,7 @@ static struct ib_qp *nes_create_qp(struct ib_pd *ibpd,
 			nesqp->nesqp_context->aeq_token_low =  cpu_to_le32((u32)((unsigned long)(nesqp)));
 			nesqp->nesqp_context->aeq_token_high =  cpu_to_le32((u32)(upper_32_bits((unsigned long)(nesqp))));
 			nesqp->nesqp_context->ird_ord_sizes = cpu_to_le32(NES_QPCONTEXT_ORDIRD_ALSMM |
+					NES_QPCONTEXT_ORDIRD_AAH |
 					((((u32)nesadapter->max_irrq_wr) <<
 					NES_QPCONTEXT_ORDIRD_IRDSIZE_SHIFT) & NES_QPCONTEXT_ORDIRD_IRDSIZE_MASK));
 			if (disable_mpa_crc) {
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
index 83a7751c38d6..bc658373ad55 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
@@ -708,6 +708,7 @@ void ipoib_cm_send(struct net_device *dev, struct sk_buff *skb, struct ipoib_cm_
 	struct ipoib_dev_priv *priv = netdev_priv(dev);
 	struct ipoib_cm_tx_buf *tx_req;
 	u64 addr;
+	int rc;
 
 	if (unlikely(skb->len > tx->mtu)) {
 		ipoib_warn(priv, "packet len %d (> %d) too long to send, dropping\n",
@@ -739,9 +740,10 @@ void ipoib_cm_send(struct net_device *dev, struct sk_buff *skb, struct ipoib_cm_
 
 	tx_req->mapping = addr;
 
-	if (unlikely(post_send(priv, tx, tx->tx_head & (ipoib_sendq_size - 1),
-			       addr, skb->len))) {
-		ipoib_warn(priv, "post_send failed\n");
+	rc = post_send(priv, tx, tx->tx_head & (ipoib_sendq_size - 1),
+		       addr, skb->len);
+	if (unlikely(rc)) {
+		ipoib_warn(priv, "post_send failed, error %d\n", rc);
 		++dev->stats.tx_errors;
 		ib_dma_unmap_single(priv->ca, addr, skb->len, DMA_TO_DEVICE);
 		dev_kfree_skb_any(skb);
@@ -752,6 +754,8 @@ void ipoib_cm_send(struct net_device *dev, struct sk_buff *skb, struct ipoib_cm_
 		if (++priv->tx_outstanding == ipoib_sendq_size) {
 			ipoib_dbg(priv, "TX ring 0x%x full, stopping kernel net queue\n",
 				  tx->qp->qp_num);
+			if (ib_req_notify_cq(priv->send_cq, IB_CQ_NEXT_COMP))
+				ipoib_warn(priv, "request notify on send CQ failed\n");
 			netif_stop_queue(dev);
 		}
 	}
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
index 8c91d9f37ada..5df40b128f81 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
@@ -529,7 +529,7 @@ void ipoib_send(struct net_device *dev, struct sk_buff *skb,
 {
 	struct ipoib_dev_priv *priv = netdev_priv(dev);
 	struct ipoib_tx_buf *tx_req;
-	int hlen;
+	int hlen, rc;
 	void *phead;
 
 	if (skb_is_gso(skb)) {
@@ -585,9 +585,10 @@ void ipoib_send(struct net_device *dev, struct sk_buff *skb,
 		netif_stop_queue(dev);
 	}
 
-	if (unlikely(post_send(priv, priv->tx_head & (ipoib_sendq_size - 1),
-			       address->ah, qpn, tx_req, phead, hlen))) {
-		ipoib_warn(priv, "post_send failed\n");
+	rc = post_send(priv, priv->tx_head & (ipoib_sendq_size - 1),
+		       address->ah, qpn, tx_req, phead, hlen);
+	if (unlikely(rc)) {
+		ipoib_warn(priv, "post_send failed, error %d\n", rc);
 		++dev->stats.tx_errors;
 		--priv->tx_outstanding;
 		ipoib_dma_unmap_tx(priv->ca, tx_req);
diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.c b/drivers/infiniband/ulp/iser/iscsi_iser.c
index 71237f8f78f7..e78af36d3a0e 100644
--- a/drivers/infiniband/ulp/iser/iscsi_iser.c
+++ b/drivers/infiniband/ulp/iser/iscsi_iser.c
@@ -613,7 +613,7 @@ static struct scsi_host_template iscsi_iser_sht = {
 	.cmd_per_lun            = ISER_DEF_CMD_PER_LUN,
 	.eh_abort_handler       = iscsi_eh_abort,
 	.eh_device_reset_handler= iscsi_eh_device_reset,
-	.eh_target_reset_handler= iscsi_eh_target_reset,
+	.eh_target_reset_handler = iscsi_eh_recover_target,
 	.target_alloc		= iscsi_target_alloc,
 	.use_clustering         = DISABLE_CLUSTERING,
 	.proc_name              = "iscsi_iser",
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index 9f9816baeb97..2ee6c7a68bdc 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -515,7 +515,7 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd,
 	struct input_absinfo abs;
 	struct ff_effect effect;
 	int __user *ip = (int __user *)p;
-	int i, t, u, v;
+	unsigned int i, t, u, v;
 	int error;
 
 	switch (cmd) {
diff --git a/drivers/input/input.c b/drivers/input/input.c
index 41168d5f8c17..e2aad0a51826 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -582,7 +582,8 @@ static int input_fetch_keycode(struct input_dev *dev, int scancode)
 }
 
 static int input_default_getkeycode(struct input_dev *dev,
-				    int scancode, int *keycode)
+				    unsigned int scancode,
+				    unsigned int *keycode)
 {
 	if (!dev->keycodesize)
 		return -EINVAL;
@@ -596,7 +597,8 @@ static int input_default_getkeycode(struct input_dev *dev,
 }
 
 static int input_default_setkeycode(struct input_dev *dev,
-				    int scancode, int keycode)
+				    unsigned int scancode,
+				    unsigned int keycode)
 {
 	int old_keycode;
 	int i;
@@ -654,11 +656,9 @@ static int input_default_setkeycode(struct input_dev *dev,
  * This function should be called by anyone interested in retrieving current
  * keymap. Presently keyboard and evdev handlers use it.
  */
-int input_get_keycode(struct input_dev *dev, int scancode, int *keycode)
+int input_get_keycode(struct input_dev *dev,
+		      unsigned int scancode, unsigned int *keycode)
 {
-	if (scancode < 0)
-		return -EINVAL;
-
 	return dev->getkeycode(dev, scancode, keycode);
 }
 EXPORT_SYMBOL(input_get_keycode);
@@ -672,16 +672,14 @@ EXPORT_SYMBOL(input_get_keycode);
  * This function should be called by anyone needing to update current
  * keymap. Presently keyboard and evdev handlers use it.
  */
-int input_set_keycode(struct input_dev *dev, int scancode, int keycode)
+int input_set_keycode(struct input_dev *dev,
+		      unsigned int scancode, unsigned int keycode)
 {
 	unsigned long flags;
 	int old_keycode;
 	int retval;
 
-	if (scancode < 0)
-		return -EINVAL;
-
-	if (keycode < 0 || keycode > KEY_MAX)
+	if (keycode > KEY_MAX)
 		return -EINVAL;
 
 	spin_lock_irqsave(&dev->event_lock, flags);
@@ -1881,35 +1879,37 @@ static int input_open_file(struct inode *inode, struct file *file)
 	const struct file_operations *old_fops, *new_fops = NULL;
 	int err;
 
-	lock_kernel();
+	err = mutex_lock_interruptible(&input_mutex);
+	if (err)
+		return err;
+
 	/* No load-on-demand here? */
 	handler = input_table[iminor(inode) >> 5];
-	if (!handler || !(new_fops = fops_get(handler->fops))) {
-		err = -ENODEV;
-		goto out;
-	}
+	if (handler)
+		new_fops = fops_get(handler->fops);
+
+	mutex_unlock(&input_mutex);
 
 	/*
 	 * That's _really_ odd. Usually NULL ->open means "nothing special",
 	 * not "no device". Oh, well...
 	 */
-	if (!new_fops->open) {
+	if (!new_fops || !new_fops->open) {
 		fops_put(new_fops);
 		err = -ENODEV;
 		goto out;
 	}
+
 	old_fops = file->f_op;
 	file->f_op = new_fops;
 
 	err = new_fops->open(inode, file);
-
 	if (err) {
 		fops_put(file->f_op);
 		file->f_op = fops_get(old_fops);
 	}
 	fops_put(old_fops);
 out:
-	unlock_kernel();
 	return err;
 }
 
diff --git a/drivers/input/joystick/gamecon.c b/drivers/input/joystick/gamecon.c
index ae998d99a5ae..7a55714a1486 100644
--- a/drivers/input/joystick/gamecon.c
+++ b/drivers/input/joystick/gamecon.c
@@ -819,7 +819,7 @@ static int __init gc_setup_pad(struct gc *gc, int idx, int pad_type)
 	int i;
 	int err;
 
-	if (pad_type < 1 || pad_type > GC_MAX) {
+	if (pad_type < 1 || pad_type >= GC_MAX) {
 		pr_err("Pad type %d unknown\n", pad_type);
 		return -EINVAL;
 	}
diff --git a/drivers/input/keyboard/bf54x-keys.c b/drivers/input/keyboard/bf54x-keys.c
index fe376a27fe57..593c052416b9 100644
--- a/drivers/input/keyboard/bf54x-keys.c
+++ b/drivers/input/keyboard/bf54x-keys.c
@@ -162,7 +162,7 @@ static irqreturn_t bfin_kpad_isr(int irq, void *dev_id)
 	input_sync(input);
 
 	if (bfin_kpad_get_keypressed(bf54x_kpad)) {
-		disable_irq(bf54x_kpad->irq);
+		disable_irq_nosync(bf54x_kpad->irq);
 		bf54x_kpad->lastkey = key;
 		mod_timer(&bf54x_kpad->timer,
 			  jiffies + bf54x_kpad->keyup_test_jiffies);
diff --git a/drivers/input/keyboard/locomokbd.c b/drivers/input/keyboard/locomokbd.c
index 9caed30f3bbb..b1ab29861e1c 100644
--- a/drivers/input/keyboard/locomokbd.c
+++ b/drivers/input/keyboard/locomokbd.c
@@ -192,11 +192,18 @@ static void locomokbd_scankeyboard(struct locomokbd *locomokbd)
 static irqreturn_t locomokbd_interrupt(int irq, void *dev_id)
 {
 	struct locomokbd *locomokbd = dev_id;
+	u16 r;
+
+	r = locomo_readl(locomokbd->base + LOCOMO_KIC);
+	if ((r & 0x0001) == 0)
+		return IRQ_HANDLED;
+
+	locomo_writel(r & ~0x0100, locomokbd->base + LOCOMO_KIC); /* Ack */
+
 	/** wait chattering delay **/
 	udelay(100);
 
 	locomokbd_scankeyboard(locomokbd);
-
 	return IRQ_HANDLED;
 }
 
@@ -210,6 +217,25 @@ static void locomokbd_timer_callback(unsigned long data)
 	locomokbd_scankeyboard(locomokbd);
 }
 
+static int locomokbd_open(struct input_dev *dev)
+{
+	struct locomokbd *locomokbd = input_get_drvdata(dev);
+	u16 r;
+	
+	r = locomo_readl(locomokbd->base + LOCOMO_KIC) | 0x0010;
+	locomo_writel(r, locomokbd->base + LOCOMO_KIC);
+	return 0;
+}
+
+static void locomokbd_close(struct input_dev *dev)
+{
+	struct locomokbd *locomokbd = input_get_drvdata(dev);
+	u16 r;
+	
+	r = locomo_readl(locomokbd->base + LOCOMO_KIC) & ~0x0010;
+	locomo_writel(r, locomokbd->base + LOCOMO_KIC);
+}
+
 static int __devinit locomokbd_probe(struct locomo_dev *dev)
 {
 	struct locomokbd *locomokbd;
@@ -253,6 +279,8 @@ static int __devinit locomokbd_probe(struct locomo_dev *dev)
 	input_dev->id.vendor = 0x0001;
 	input_dev->id.product = 0x0001;
 	input_dev->id.version = 0x0100;
+	input_dev->open = locomokbd_open;
+	input_dev->close = locomokbd_close;
 	input_dev->dev.parent = &dev->dev;
 
 	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) |
@@ -261,6 +289,8 @@ static int __devinit locomokbd_probe(struct locomo_dev *dev)
 	input_dev->keycodesize = sizeof(locomokbd_keycode[0]);
 	input_dev->keycodemax = ARRAY_SIZE(locomokbd_keycode);
 
+	input_set_drvdata(input_dev, locomokbd);
+
 	memcpy(locomokbd->keycode, locomokbd_keycode, sizeof(locomokbd->keycode));
 	for (i = 0; i < LOCOMOKBD_NUMKEYS; i++)
 		set_bit(locomokbd->keycode[i], input_dev->keybit);
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 7097bfe581d7..23140a3bb8e0 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -214,6 +214,17 @@ config INPUT_TWL4030_PWRBUTTON
 	  To compile this driver as a module, choose M here. The module will
 	  be called twl4030_pwrbutton.
 
+config INPUT_TWL4030_VIBRA
+	tristate "Support for TWL4030 Vibrator"
+	depends on TWL4030_CORE
+	select TWL4030_CODEC
+	select INPUT_FF_MEMLESS
+	help
+	  This option enables support for TWL4030 Vibrator Driver.
+
+	  To compile this driver as a module, choose M here. The module will
+	  be called twl4030_vibra.
+
 config INPUT_UINPUT
 	tristate "User level driver support"
 	help
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index b611615e24ad..7e95a5d474dc 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER)	+= rotary_encoder.o
 obj-$(CONFIG_INPUT_SGI_BTNS)		+= sgi_btns.o
 obj-$(CONFIG_INPUT_SPARCSPKR)		+= sparcspkr.o
 obj-$(CONFIG_INPUT_TWL4030_PWRBUTTON)	+= twl4030-pwrbutton.o
+obj-$(CONFIG_INPUT_TWL4030_VIBRA)	+= twl4030-vibra.o
 obj-$(CONFIG_INPUT_UINPUT)		+= uinput.o
 obj-$(CONFIG_INPUT_WINBOND_CIR)		+= winbond-cir.o
 obj-$(CONFIG_INPUT_WISTRON_BTNS)	+= wistron_btns.o
diff --git a/drivers/input/misc/ati_remote2.c b/drivers/input/misc/ati_remote2.c
index 0501f0e65157..15be5430bc6d 100644
--- a/drivers/input/misc/ati_remote2.c
+++ b/drivers/input/misc/ati_remote2.c
@@ -474,10 +474,11 @@ static void ati_remote2_complete_key(struct urb *urb)
 }
 
 static int ati_remote2_getkeycode(struct input_dev *idev,
-				  int scancode, int *keycode)
+				  unsigned int scancode, unsigned int *keycode)
 {
 	struct ati_remote2 *ar2 = input_get_drvdata(idev);
-	int index, mode;
+	unsigned int mode;
+	int index;
 
 	mode = scancode >> 8;
 	if (mode > ATI_REMOTE2_PC || !((1 << mode) & ar2->mode_mask))
@@ -491,10 +492,12 @@ static int ati_remote2_getkeycode(struct input_dev *idev,
 	return 0;
 }
 
-static int ati_remote2_setkeycode(struct input_dev *idev, int scancode, int keycode)
+static int ati_remote2_setkeycode(struct input_dev *idev,
+				  unsigned int scancode, unsigned int keycode)
 {
 	struct ati_remote2 *ar2 = input_get_drvdata(idev);
-	int index, mode, old_keycode;
+	unsigned int mode, old_keycode;
+	int index;
 
 	mode = scancode >> 8;
 	if (mode > ATI_REMOTE2_PC || !((1 << mode) & ar2->mode_mask))
@@ -504,9 +507,6 @@ static int ati_remote2_setkeycode(struct input_dev *idev, int scancode, int keyc
 	if (index < 0)
 		return -EINVAL;
 
-	if (keycode < KEY_RESERVED || keycode > KEY_MAX)
-		return -EINVAL;
-
 	old_keycode = ar2->keycode[mode][index];
 	ar2->keycode[mode][index] = keycode;
 	__set_bit(keycode, idev->keybit);
diff --git a/drivers/input/misc/twl4030-vibra.c b/drivers/input/misc/twl4030-vibra.c
new file mode 100644
index 000000000000..2fb79e064da3
--- /dev/null
+++ b/drivers/input/misc/twl4030-vibra.c
@@ -0,0 +1,297 @@
+/*
+ * twl4030-vibra.c - TWL4030 Vibrator driver
+ *
+ * Copyright (C) 2008-2010 Nokia Corporation
+ *
+ * Written by Henrik Saari <henrik.saari@nokia.com>
+ * Updates by Felipe Balbi <felipe.balbi@nokia.com>
+ * Input by Jari Vanhala <ext-jari.vanhala@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/jiffies.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+#include <linux/i2c/twl.h>
+#include <linux/mfd/twl4030-codec.h>
+#include <linux/input.h>
+
+/* MODULE ID2 */
+#define LEDEN		0x00
+
+/* ForceFeedback */
+#define EFFECT_DIR_180_DEG	0x8000 /* range is 0 - 0xFFFF */
+
+struct vibra_info {
+	struct device		*dev;
+	struct input_dev	*input_dev;
+
+	struct workqueue_struct *workqueue;
+	struct work_struct	play_work;
+
+	bool			enabled;
+	int			speed;
+	int			direction;
+
+	bool			coexist;
+};
+
+static void vibra_disable_leds(void)
+{
+	u8 reg;
+
+	/* Disable LEDA & LEDB, cannot be used with vibra (PWM) */
+	twl_i2c_read_u8(TWL4030_MODULE_LED, &reg, LEDEN);
+	reg &= ~0x03;
+	twl_i2c_write_u8(TWL4030_MODULE_LED, LEDEN, reg);
+}
+
+/* Powers H-Bridge and enables audio clk */
+static void vibra_enable(struct vibra_info *info)
+{
+	u8 reg;
+
+	twl4030_codec_enable_resource(TWL4030_CODEC_RES_POWER);
+
+	/* turn H-Bridge on */
+	twl_i2c_read_u8(TWL4030_MODULE_AUDIO_VOICE,
+			&reg, TWL4030_REG_VIBRA_CTL);
+	twl_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE,
+			 (reg | TWL4030_VIBRA_EN), TWL4030_REG_VIBRA_CTL);
+
+	twl4030_codec_enable_resource(TWL4030_CODEC_RES_APLL);
+
+	info->enabled = true;
+}
+
+static void vibra_disable(struct vibra_info *info)
+{
+	u8 reg;
+
+	/* Power down H-Bridge */
+	twl_i2c_read_u8(TWL4030_MODULE_AUDIO_VOICE,
+			&reg, TWL4030_REG_VIBRA_CTL);
+	twl_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE,
+			 (reg & ~TWL4030_VIBRA_EN), TWL4030_REG_VIBRA_CTL);
+
+	twl4030_codec_disable_resource(TWL4030_CODEC_RES_POWER);
+	twl4030_codec_disable_resource(TWL4030_CODEC_RES_APLL);
+
+	info->enabled = false;
+}
+
+static void vibra_play_work(struct work_struct *work)
+{
+	struct vibra_info *info = container_of(work,
+			struct vibra_info, play_work);
+	int dir;
+	int pwm;
+	u8 reg;
+
+	dir = info->direction;
+	pwm = info->speed;
+
+	twl_i2c_read_u8(TWL4030_MODULE_AUDIO_VOICE,
+			&reg, TWL4030_REG_VIBRA_CTL);
+	if (pwm && (!info->coexist || !(reg & TWL4030_VIBRA_SEL))) {
+
+		if (!info->enabled)
+			vibra_enable(info);
+
+		/* set vibra rotation direction */
+		twl_i2c_read_u8(TWL4030_MODULE_AUDIO_VOICE,
+				&reg, TWL4030_REG_VIBRA_CTL);
+		reg = (dir) ? (reg | TWL4030_VIBRA_DIR) :
+			(reg & ~TWL4030_VIBRA_DIR);
+		twl_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE,
+				 reg, TWL4030_REG_VIBRA_CTL);
+
+		/* set PWM, 1 = max, 255 = min */
+		twl_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE,
+				 256 - pwm, TWL4030_REG_VIBRA_SET);
+	} else {
+		if (info->enabled)
+			vibra_disable(info);
+	}
+}
+
+/*** Input/ForceFeedback ***/
+
+static int vibra_play(struct input_dev *input, void *data,
+		      struct ff_effect *effect)
+{
+	struct vibra_info *info = input_get_drvdata(input);
+
+	info->speed = effect->u.rumble.strong_magnitude >> 8;
+	if (!info->speed)
+		info->speed = effect->u.rumble.weak_magnitude >> 9;
+	info->direction = effect->direction < EFFECT_DIR_180_DEG ? 0 : 1;
+	queue_work(info->workqueue, &info->play_work);
+	return 0;
+}
+
+static int twl4030_vibra_open(struct input_dev *input)
+{
+	struct vibra_info *info = input_get_drvdata(input);
+
+	info->workqueue = create_singlethread_workqueue("vibra");
+	if (info->workqueue == NULL) {
+		dev_err(&input->dev, "couldn't create workqueue\n");
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+static void twl4030_vibra_close(struct input_dev *input)
+{
+	struct vibra_info *info = input_get_drvdata(input);
+
+	cancel_work_sync(&info->play_work);
+	INIT_WORK(&info->play_work, vibra_play_work); /* cleanup */
+	destroy_workqueue(info->workqueue);
+	info->workqueue = NULL;
+
+	if (info->enabled)
+		vibra_disable(info);
+}
+
+/*** Module ***/
+#if CONFIG_PM
+static int twl4030_vibra_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct vibra_info *info = platform_get_drvdata(pdev);
+
+	if (info->enabled)
+		vibra_disable(info);
+
+	return 0;
+}
+
+static int twl4030_vibra_resume(struct device *dev)
+{
+	vibra_disable_leds();
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(twl4030_vibra_pm_ops,
+			 twl4030_vibra_suspend, twl4030_vibra_resume);
+#endif
+
+static int __devinit twl4030_vibra_probe(struct platform_device *pdev)
+{
+	struct twl4030_codec_vibra_data *pdata = pdev->dev.platform_data;
+	struct vibra_info *info;
+	int ret;
+
+	if (!pdata) {
+		dev_dbg(&pdev->dev, "platform_data not available\n");
+		return -EINVAL;
+	}
+
+	info = kzalloc(sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->dev = &pdev->dev;
+	info->coexist = pdata->coexist;
+	INIT_WORK(&info->play_work, vibra_play_work);
+
+	info->input_dev = input_allocate_device();
+	if (info->input_dev == NULL) {
+		dev_err(&pdev->dev, "couldn't allocate input device\n");
+		ret = -ENOMEM;
+		goto err_kzalloc;
+	}
+
+	input_set_drvdata(info->input_dev, info);
+
+	info->input_dev->name = "twl4030:vibrator";
+	info->input_dev->id.version = 1;
+	info->input_dev->dev.parent = pdev->dev.parent;
+	info->input_dev->open = twl4030_vibra_open;
+	info->input_dev->close = twl4030_vibra_close;
+	__set_bit(FF_RUMBLE, info->input_dev->ffbit);
+
+	ret = input_ff_create_memless(info->input_dev, NULL, vibra_play);
+	if (ret < 0) {
+		dev_dbg(&pdev->dev, "couldn't register vibrator to FF\n");
+		goto err_ialloc;
+	}
+
+	ret = input_register_device(info->input_dev);
+	if (ret < 0) {
+		dev_dbg(&pdev->dev, "couldn't register input device\n");
+		goto err_iff;
+	}
+
+	vibra_disable_leds();
+
+	platform_set_drvdata(pdev, info);
+	return 0;
+
+err_iff:
+	input_ff_destroy(info->input_dev);
+err_ialloc:
+	input_free_device(info->input_dev);
+err_kzalloc:
+	kfree(info);
+	return ret;
+}
+
+static int __devexit twl4030_vibra_remove(struct platform_device *pdev)
+{
+	struct vibra_info *info = platform_get_drvdata(pdev);
+
+	/* this also free ff-memless and calls close if needed */
+	input_unregister_device(info->input_dev);
+	kfree(info);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static struct platform_driver twl4030_vibra_driver = {
+	.probe		= twl4030_vibra_probe,
+	.remove		= __devexit_p(twl4030_vibra_remove),
+	.driver		= {
+		.name	= "twl4030_codec_vibra",
+		.owner	= THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm	= &twl4030_vibra_pm_ops,
+#endif
+	},
+};
+
+static int __init twl4030_vibra_init(void)
+{
+	return platform_driver_register(&twl4030_vibra_driver);
+}
+module_init(twl4030_vibra_init);
+
+static void __exit twl4030_vibra_exit(void)
+{
+	platform_driver_unregister(&twl4030_vibra_driver);
+}
+module_exit(twl4030_vibra_exit);
+
+MODULE_ALIAS("platform:twl4030_codec_vibra");
+
+MODULE_DESCRIPTION("TWL4030 Vibra driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Nokia Corporation");
diff --git a/drivers/input/misc/winbond-cir.c b/drivers/input/misc/winbond-cir.c
index cbec3dfdd42b..9c155a43abc2 100644
--- a/drivers/input/misc/winbond-cir.c
+++ b/drivers/input/misc/winbond-cir.c
@@ -385,26 +385,24 @@ wbcir_do_getkeycode(struct wbcir_data *data, u32 scancode)
 }
 
 static int
-wbcir_getkeycode(struct input_dev *dev, int scancode, int *keycode)
+wbcir_getkeycode(struct input_dev *dev,
+		 unsigned int scancode, unsigned int *keycode)
 {
 	struct wbcir_data *data = input_get_drvdata(dev);
 
-	*keycode = (int)wbcir_do_getkeycode(data, (u32)scancode);
+	*keycode = wbcir_do_getkeycode(data, scancode);
 	return 0;
 }
 
 static int
-wbcir_setkeycode(struct input_dev *dev, int sscancode, int keycode)
+wbcir_setkeycode(struct input_dev *dev,
+		 unsigned int scancode, unsigned int keycode)
 {
 	struct wbcir_data *data = input_get_drvdata(dev);
 	struct wbcir_keyentry *keyentry;
 	struct wbcir_keyentry *new_keyentry;
 	unsigned long flags;
 	unsigned int old_keycode = KEY_RESERVED;
-	u32 scancode = (u32)sscancode;
-
-	if (keycode < 0 || keycode > KEY_MAX)
-		return -EINVAL;
 
 	new_keyentry = kmalloc(sizeof(*new_keyentry), GFP_KERNEL);
 	if (!new_keyentry)
diff --git a/drivers/input/misc/wm831x-on.c b/drivers/input/misc/wm831x-on.c
index ba4f5dd7c60e..1e54bce72db5 100644
--- a/drivers/input/misc/wm831x-on.c
+++ b/drivers/input/misc/wm831x-on.c
@@ -97,8 +97,9 @@ static int __devinit wm831x_on_probe(struct platform_device *pdev)
 	wm831x_on->dev->phys = "wm831x_on/input0";
 	wm831x_on->dev->dev.parent = &pdev->dev;
 
-	ret = wm831x_request_irq(wm831x, irq, wm831x_on_irq,
-				 IRQF_TRIGGER_RISING, "wm831x_on", wm831x_on);
+	ret = request_threaded_irq(irq, NULL, wm831x_on_irq,
+				   IRQF_TRIGGER_RISING, "wm831x_on",
+				   wm831x_on);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "Unable to request IRQ: %d\n", ret);
 		goto err_input_dev;
@@ -114,7 +115,7 @@ static int __devinit wm831x_on_probe(struct platform_device *pdev)
 	return 0;
 
 err_irq:
-	wm831x_free_irq(wm831x, irq, NULL);
+	free_irq(irq, wm831x_on);
 err_input_dev:
 	input_free_device(wm831x_on->dev);
 err:
@@ -127,7 +128,7 @@ static int __devexit wm831x_on_remove(struct platform_device *pdev)
 	struct wm831x_on *wm831x_on = platform_get_drvdata(pdev);
 	int irq = platform_get_irq(pdev, 0);
 
-	wm831x_free_irq(wm831x_on->wm831x, irq, wm831x_on);
+	free_irq(irq, wm831x_on);
 	cancel_delayed_work_sync(&wm831x_on->work);
 	input_unregister_device(wm831x_on->dev);
 	kfree(wm831x_on);
diff --git a/drivers/input/misc/yealink.h b/drivers/input/misc/yealink.h
index 48af0be9cbdf..1e0f52397010 100644
--- a/drivers/input/misc/yealink.h
+++ b/drivers/input/misc/yealink.h
@@ -127,7 +127,7 @@ struct yld_ctl_packet {
  * yld_status struct.
  */
 
-/* LCD, each segment must be driven seperately.
+/* LCD, each segment must be driven separately.
  *
  * Layout:
  *
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index f93c2c0daf1f..7490f1da4a53 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -63,6 +63,8 @@ static const struct alps_model_info alps_model_data[] = {
 	{ { 0x62, 0x02, 0x14 }, 0xcf, 0xcf,
 		ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED },
 	{ { 0x73, 0x02, 0x50 }, 0xcf, 0xcf, ALPS_FOUR_BUTTONS },	  /* Dell Vostro 1400 */
+	{ { 0x52, 0x01, 0x14 }, 0xff, 0xff,
+		ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED },	  /* Toshiba Tecra A11-11L */
 };
 
 /*
@@ -118,40 +120,27 @@ static void alps_report_buttons(struct psmouse *psmouse,
 				struct input_dev *dev1, struct input_dev *dev2,
 				int left, int right, int middle)
 {
-	struct alps_data *priv = psmouse->private;
-	const struct alps_model_info *model = priv->i;
-
-	if (model->flags & ALPS_PS2_INTERLEAVED) {
-		struct input_dev *dev;
+	struct input_dev *dev;
 
-		/*
-		 * If shared button has already been reported on the
-		 * other device (dev2) then this event should be also
-		 * sent through that device.
-		 */
-		dev = test_bit(BTN_LEFT, dev2->key) ? dev2 : dev1;
-		input_report_key(dev, BTN_LEFT, left);
+	/*
+	 * If shared button has already been reported on the
+	 * other device (dev2) then this event should be also
+	 * sent through that device.
+	 */
+	dev = test_bit(BTN_LEFT, dev2->key) ? dev2 : dev1;
+	input_report_key(dev, BTN_LEFT, left);
 
-		dev = test_bit(BTN_RIGHT, dev2->key) ? dev2 : dev1;
-		input_report_key(dev, BTN_RIGHT, right);
+	dev = test_bit(BTN_RIGHT, dev2->key) ? dev2 : dev1;
+	input_report_key(dev, BTN_RIGHT, right);
 
-		dev = test_bit(BTN_MIDDLE, dev2->key) ? dev2 : dev1;
-		input_report_key(dev, BTN_MIDDLE, middle);
+	dev = test_bit(BTN_MIDDLE, dev2->key) ? dev2 : dev1;
+	input_report_key(dev, BTN_MIDDLE, middle);
 
-		/*
-		 * Sync the _other_ device now, we'll do the first
-		 * device later once we report the rest of the events.
-		 */
-		input_sync(dev2);
-	} else {
-		/*
-		 * For devices with non-interleaved packets we know what
-		 * device buttons belong to so we can simply report them.
-		 */
-		input_report_key(dev1, BTN_LEFT, left);
-		input_report_key(dev1, BTN_RIGHT, right);
-		input_report_key(dev1, BTN_MIDDLE, middle);
-	}
+	/*
+	 * Sync the _other_ device now, we'll do the first
+	 * device later once we report the rest of the events.
+	 */
+	input_sync(dev2);
 }
 
 static void alps_process_packet(struct psmouse *psmouse)
diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c
index 908b5b44052f..53ec7ddd1826 100644
--- a/drivers/input/mouse/appletouch.c
+++ b/drivers/input/mouse/appletouch.c
@@ -205,8 +205,8 @@ struct atp {
 	bool			overflow_warned;
 	int			x_old;		/* last reported x/y, */
 	int			y_old;		/* used for smoothing */
-	signed char		xy_cur[ATP_XSENSORS + ATP_YSENSORS];
-	signed char		xy_old[ATP_XSENSORS + ATP_YSENSORS];
+	u8			xy_cur[ATP_XSENSORS + ATP_YSENSORS];
+	u8			xy_old[ATP_XSENSORS + ATP_YSENSORS];
 	int			xy_acc[ATP_XSENSORS + ATP_YSENSORS];
 	int			idlecount;	/* number of empty packets */
 	struct work_struct	work;
@@ -531,7 +531,7 @@ static void atp_complete_geyser_1_2(struct urb *urb)
 
 	for (i = 0; i < ATP_XSENSORS + ATP_YSENSORS; i++) {
 		/* accumulate the change */
-		signed char change = dev->xy_old[i] - dev->xy_cur[i];
+		int change = dev->xy_old[i] - dev->xy_cur[i];
 		dev->xy_acc[i] -= change;
 
 		/* prevent down drifting */
diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c
index a13d80f7da17..f34b22bce4ff 100644
--- a/drivers/input/mousedev.c
+++ b/drivers/input/mousedev.c
@@ -15,7 +15,6 @@
 
 #include <linux/sched.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/poll.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -542,10 +541,8 @@ static int mousedev_open(struct inode *inode, struct file *file)
 	if (i >= MOUSEDEV_MINORS)
 		return -ENODEV;
 
-	lock_kernel();
 	error = mutex_lock_interruptible(&mousedev_table_mutex);
 	if (error) {
-		unlock_kernel();
 		return error;
 	}
 	mousedev = mousedev_table[i];
@@ -554,7 +551,6 @@ static int mousedev_open(struct inode *inode, struct file *file)
 	mutex_unlock(&mousedev_table_mutex);
 
 	if (!mousedev) {
-		unlock_kernel();
 		return -ENODEV;
 	}
 
@@ -575,7 +571,6 @@ static int mousedev_open(struct inode *inode, struct file *file)
 		goto err_free_client;
 
 	file->private_data = client;
-	unlock_kernel();
 	return 0;
 
  err_free_client:
@@ -583,7 +578,6 @@ static int mousedev_open(struct inode *inode, struct file *file)
 	kfree(client);
  err_put_mousedev:
 	put_device(&mousedev->dev);
-	unlock_kernel();
 	return error;
 }
 
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 2a5982e532f8..ead0494721d0 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -442,6 +442,13 @@ static const struct dmi_system_id __initconst i8042_dmi_reset_table[] = {
 		},
 	},
 	{
+		/* Medion Akoya E1222 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "MEDION"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "E122X"),
+		},
+	},
+	{
 		/* Mivvy M310 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "VIOOO"),
@@ -624,6 +631,9 @@ static int i8042_pnp_kbd_probe(struct pnp_dev *dev, const struct pnp_device_id *
 		strlcat(i8042_pnp_kbd_name, pnp_dev_name(dev), sizeof(i8042_pnp_kbd_name));
 	}
 
+	/* Keyboard ports are always supposed to be wakeup-enabled */
+	device_set_wakeup_enable(&dev->dev, true);
+
 	i8042_pnp_kbd_devices++;
 	return 0;
 }
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index b54aee7cd9e3..9302ba0e48f8 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -430,7 +430,7 @@ static bool i8042_filter(unsigned char data, unsigned char str,
 	}
 
 	if (i8042_platform_filter && i8042_platform_filter(data, str, serio)) {
-		dbg("Filtered out by platfrom filter\n");
+		dbg("Filtered out by platform filter\n");
 		return true;
 	}
 
@@ -1386,6 +1386,8 @@ static int __init i8042_probe(struct platform_device *dev)
 {
 	int error;
 
+	i8042_platform_device = dev;
+
 	error = i8042_controller_selftest();
 	if (error)
 		return error;
@@ -1421,6 +1423,7 @@ static int __init i8042_probe(struct platform_device *dev)
 	i8042_free_aux_ports();	/* in case KBD failed but AUX not */
 	i8042_free_irqs();
 	i8042_controller_reset();
+	i8042_platform_device = NULL;
 
 	return error;
 }
@@ -1430,6 +1433,7 @@ static int __devexit i8042_remove(struct platform_device *dev)
 	i8042_unregister_ports();
 	i8042_free_irqs();
 	i8042_controller_reset();
+	i8042_platform_device = NULL;
 
 	return 0;
 }
@@ -1448,6 +1452,7 @@ static struct platform_driver i8042_driver = {
 
 static int __init i8042_init(void)
 {
+	struct platform_device *pdev;
 	int err;
 
 	dbg_init();
@@ -1460,31 +1465,18 @@ static int __init i8042_init(void)
 	if (err)
 		goto err_platform_exit;
 
-	i8042_platform_device = platform_device_alloc("i8042", -1);
-	if (!i8042_platform_device) {
-		err = -ENOMEM;
+	pdev = platform_create_bundle(&i8042_driver, i8042_probe, NULL, 0, NULL, 0);
+	if (IS_ERR(pdev)) {
+		err = PTR_ERR(pdev);
 		goto err_platform_exit;
 	}
 
-	err = platform_device_add(i8042_platform_device);
-	if (err)
-		goto err_free_device;
-
-	err = platform_driver_probe(&i8042_driver, i8042_probe);
-	if (err)
-		goto err_del_device;
-
 	panic_blink = i8042_panic_blink;
 
 	return 0;
 
- err_del_device:
-	platform_device_del(i8042_platform_device);
- err_free_device:
-	platform_device_put(i8042_platform_device);
  err_platform_exit:
 	i8042_platform_exit();
-
 	return err;
 }
 
diff --git a/drivers/input/serio/serio_raw.c b/drivers/input/serio/serio_raw.c
index 27fdaaffbb40..998664854440 100644
--- a/drivers/input/serio/serio_raw.c
+++ b/drivers/input/serio/serio_raw.c
@@ -81,12 +81,12 @@ static int serio_raw_open(struct inode *inode, struct file *file)
 	struct serio_raw_list *list;
 	int retval = 0;
 
-	lock_kernel();
 	retval = mutex_lock_interruptible(&serio_raw_mutex);
 	if (retval)
-		goto out_bkl;
+		return retval;
 
-	if (!(serio_raw = serio_raw_locate(iminor(inode)))) {
+	serio_raw = serio_raw_locate(iminor(inode));
+	if (!serio_raw) {
 		retval = -ENODEV;
 		goto out;
 	}
@@ -96,7 +96,8 @@ static int serio_raw_open(struct inode *inode, struct file *file)
 		goto out;
 	}
 
-	if (!(list = kzalloc(sizeof(struct serio_raw_list), GFP_KERNEL))) {
+	list = kzalloc(sizeof(struct serio_raw_list), GFP_KERNEL);
+	if (!list) {
 		retval = -ENOMEM;
 		goto out;
 	}
@@ -109,8 +110,6 @@ static int serio_raw_open(struct inode *inode, struct file *file)
 
 out:
 	mutex_unlock(&serio_raw_mutex);
-out_bkl:
-	unlock_kernel();
 	return retval;
 }
 
diff --git a/drivers/input/sparse-keymap.c b/drivers/input/sparse-keymap.c
index fbd3987af57f..e6bde55e5203 100644
--- a/drivers/input/sparse-keymap.c
+++ b/drivers/input/sparse-keymap.c
@@ -64,7 +64,8 @@ struct key_entry *sparse_keymap_entry_from_keycode(struct input_dev *dev,
 EXPORT_SYMBOL(sparse_keymap_entry_from_keycode);
 
 static int sparse_keymap_getkeycode(struct input_dev *dev,
-				    int scancode, int *keycode)
+				    unsigned int scancode,
+				    unsigned int *keycode)
 {
 	const struct key_entry *key =
 			sparse_keymap_entry_from_scancode(dev, scancode);
@@ -78,7 +79,8 @@ static int sparse_keymap_getkeycode(struct input_dev *dev,
 }
 
 static int sparse_keymap_setkeycode(struct input_dev *dev,
-				    int scancode, int keycode)
+				    unsigned int scancode,
+				    unsigned int keycode)
 {
 	struct key_entry *key;
 	int old_keycode;
diff --git a/drivers/input/tablet/aiptek.c b/drivers/input/tablet/aiptek.c
index 7d005a3616d7..4be039d7dcad 100644
--- a/drivers/input/tablet/aiptek.c
+++ b/drivers/input/tablet/aiptek.c
@@ -362,7 +362,7 @@ static const int macroKeyEvents[] = {
 };
 
 /***********************************************************************
- * Map values to strings and back. Every map shoudl have the following
+ * Map values to strings and back. Every map should have the following
  * as its last element: { NULL, AIPTEK_INVALID_VALUE }.
  */
 #define AIPTEK_INVALID_VALUE	-1
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index a1770e6feeec..8b5d2873f0c4 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -371,7 +371,7 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi
 					} else if (pen) {
 						/* penabled only accepts exact bytes of data */
 						if (features->type == TABLETPC2FG)
-							features->pktlen = WACOM_PKGLEN_PENABLED;
+							features->pktlen = WACOM_PKGLEN_GRAPHIRE;
 						features->device_type = BTN_TOOL_PEN;
 						features->x_max =
 							wacom_le16_to_cpu(&report[i + 3]);
@@ -410,7 +410,7 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi
 					} else if (pen) {
 						/* penabled only accepts exact bytes of data */
 						if (features->type == TABLETPC2FG)
-							features->pktlen = WACOM_PKGLEN_PENABLED;
+							features->pktlen = WACOM_PKGLEN_GRAPHIRE;
 						features->device_type = BTN_TOOL_PEN;
 						features->y_max =
 							wacom_le16_to_cpu(&report[i + 3]);
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 3d81443e683a..b3ba3437a2eb 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -155,19 +155,19 @@ static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo)
 {
 	struct wacom_features *features = &wacom->features;
 	unsigned char *data = wacom->data;
-	int x, y, rw;
-	static int penData = 0;
+	int x, y, prox;
+	int rw = 0;
+	int retval = 0;
 
 	if (data[0] != WACOM_REPORT_PENABLED) {
 		dbg("wacom_graphire_irq: received unknown report #%d", data[0]);
-		return 0;
+		goto exit;
 	}
 
-	if (data[1] & 0x80) {
-		/* in prox and not a pad data */
-		penData = 1;
-
-		switch ((data[1] >> 5) & 3) {
+	prox = data[1] & 0x80;
+	if (prox || wacom->id[0]) {
+		if (prox) {
+			switch ((data[1] >> 5) & 3) {
 
 			case 0:	/* Pen */
 				wacom->tool[0] = BTN_TOOL_PEN;
@@ -181,23 +181,13 @@ static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo)
 
 			case 2: /* Mouse with wheel */
 				wacom_report_key(wcombo, BTN_MIDDLE, data[1] & 0x04);
-				if (features->type == WACOM_G4 || features->type == WACOM_MO) {
-					rw = data[7] & 0x04 ? (data[7] & 0x03)-4 : (data[7] & 0x03);
-					wacom_report_rel(wcombo, REL_WHEEL, -rw);
-				} else
-					wacom_report_rel(wcombo, REL_WHEEL, -(signed char) data[6]);
 				/* fall through */
 
 			case 3: /* Mouse without wheel */
 				wacom->tool[0] = BTN_TOOL_MOUSE;
 				wacom->id[0] = CURSOR_DEVICE_ID;
-				wacom_report_key(wcombo, BTN_LEFT, data[1] & 0x01);
-				wacom_report_key(wcombo, BTN_RIGHT, data[1] & 0x02);
-				if (features->type == WACOM_G4 || features->type == WACOM_MO)
-					wacom_report_abs(wcombo, ABS_DISTANCE, data[6] & 0x3f);
-				else
-					wacom_report_abs(wcombo, ABS_DISTANCE, data[7] & 0x3f);
 				break;
+			}
 		}
 		x = wacom_le16_to_cpu(&data[2]);
 		y = wacom_le16_to_cpu(&data[4]);
@@ -208,36 +198,32 @@ static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo)
 			wacom_report_key(wcombo, BTN_TOUCH, data[1] & 0x01);
 			wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02);
 			wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x04);
-		}
-		wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]); /* report tool id */
-		wacom_report_key(wcombo, wacom->tool[0], 1);
-	} else if (wacom->id[0]) {
-		wacom_report_abs(wcombo, ABS_X, 0);
-		wacom_report_abs(wcombo, ABS_Y, 0);
-		if (wacom->tool[0] == BTN_TOOL_MOUSE) {
-			wacom_report_key(wcombo, BTN_LEFT, 0);
-			wacom_report_key(wcombo, BTN_RIGHT, 0);
-			wacom_report_abs(wcombo, ABS_DISTANCE, 0);
 		} else {
-			wacom_report_abs(wcombo, ABS_PRESSURE, 0);
-			wacom_report_key(wcombo, BTN_TOUCH, 0);
-			wacom_report_key(wcombo, BTN_STYLUS, 0);
-			wacom_report_key(wcombo, BTN_STYLUS2, 0);
+			wacom_report_key(wcombo, BTN_LEFT, data[1] & 0x01);
+			wacom_report_key(wcombo, BTN_RIGHT, data[1] & 0x02);
+			if (features->type == WACOM_G4 ||
+					features->type == WACOM_MO) {
+				wacom_report_abs(wcombo, ABS_DISTANCE, data[6] & 0x3f);
+				rw = (signed)(data[7] & 0x04) - (data[7] & 0x03);
+			} else {
+				wacom_report_abs(wcombo, ABS_DISTANCE, data[7] & 0x3f);
+				rw = -(signed)data[6];
+			}
+			wacom_report_rel(wcombo, REL_WHEEL, rw);
 		}
-		wacom->id[0] = 0;
-		wacom_report_abs(wcombo, ABS_MISC, 0); /* reset tool id */
-		wacom_report_key(wcombo, wacom->tool[0], 0);
+
+		if (!prox)
+			wacom->id[0] = 0;
+		wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]); /* report tool id */
+		wacom_report_key(wcombo, wacom->tool[0], prox);
+		wacom_input_sync(wcombo); /* sync last event */
 	}
 
 	/* send pad data */
 	switch (features->type) {
 	    case WACOM_G4:
-		if (data[7] & 0xf8) {
-			if (penData) {
-				wacom_input_sync(wcombo); /* sync last event */
-				if (!wacom->id[0])
-					penData = 0;
-			}
+		prox = data[7] & 0xf8;
+		if (prox || wacom->id[1]) {
 			wacom->id[1] = PAD_DEVICE_ID;
 			wacom_report_key(wcombo, BTN_0, (data[7] & 0x40));
 			wacom_report_key(wcombo, BTN_4, (data[7] & 0x80));
@@ -245,29 +231,16 @@ static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo)
 			wacom_report_rel(wcombo, REL_WHEEL, rw);
 			wacom_report_key(wcombo, BTN_TOOL_FINGER, 0xf0);
 			wacom_report_abs(wcombo, ABS_MISC, wacom->id[1]);
-			wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0);
-		} else if (wacom->id[1]) {
-			if (penData) {
-				wacom_input_sync(wcombo); /* sync last event */
-				if (!wacom->id[0])
-					penData = 0;
-			}
-			wacom->id[1] = 0;
-			wacom_report_key(wcombo, BTN_0, (data[7] & 0x40));
-			wacom_report_key(wcombo, BTN_4, (data[7] & 0x80));
-			wacom_report_rel(wcombo, REL_WHEEL, 0);
-			wacom_report_key(wcombo, BTN_TOOL_FINGER, 0);
-			wacom_report_abs(wcombo, ABS_MISC, 0);
+			if (!prox)
+				wacom->id[1] = 0;
+			wacom_report_abs(wcombo, ABS_MISC, wacom->id[1]);
 			wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0);
 		}
+		retval = 1;
 		break;
 	    case WACOM_MO:
-		if ((data[7] & 0xf8) || (data[8] & 0xff)) {
-			if (penData) {
-				wacom_input_sync(wcombo); /* sync last event */
-				if (!wacom->id[0])
-					penData = 0;
-			}
+		prox = (data[7] & 0xf8) || data[8];
+		if (prox || wacom->id[1]) {
 			wacom->id[1] = PAD_DEVICE_ID;
 			wacom_report_key(wcombo, BTN_0, (data[7] & 0x08));
 			wacom_report_key(wcombo, BTN_1, (data[7] & 0x20));
@@ -275,27 +248,16 @@ static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo)
 			wacom_report_key(wcombo, BTN_5, (data[7] & 0x40));
 			wacom_report_abs(wcombo, ABS_WHEEL, (data[8] & 0x7f));
 			wacom_report_key(wcombo, BTN_TOOL_FINGER, 0xf0);
+			if (!prox)
+				wacom->id[1] = 0;
 			wacom_report_abs(wcombo, ABS_MISC, wacom->id[1]);
 			wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0);
-		} else if (wacom->id[1]) {
-			if (penData) {
-				wacom_input_sync(wcombo); /* sync last event */
-				if (!wacom->id[0])
-					penData = 0;
-			}
-			wacom->id[1] = 0;
-			wacom_report_key(wcombo, BTN_0, (data[7] & 0x08));
-			wacom_report_key(wcombo, BTN_1, (data[7] & 0x20));
-			wacom_report_key(wcombo, BTN_4, (data[7] & 0x10));
-			wacom_report_key(wcombo, BTN_5, (data[7] & 0x40));
-			wacom_report_abs(wcombo, ABS_WHEEL, (data[8] & 0x7f));
-			wacom_report_key(wcombo, BTN_TOOL_FINGER, 0);
-			wacom_report_abs(wcombo, ABS_MISC, 0);
-			wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0);
 		}
+		retval = 1;
 		break;
 	}
-	return 1;
+exit:
+	return retval;
 }
 
 static int wacom_intuos_inout(struct wacom_wac *wacom, void *wcombo)
@@ -636,9 +598,9 @@ static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo)
 static void wacom_tpc_finger_in(struct wacom_wac *wacom, void *wcombo, char *data, int idx)
 {
 	wacom_report_abs(wcombo, ABS_X,
-		(data[2 + idx * 2] & 0xff) | ((data[3 + idx * 2] & 0x7f) << 8));
+		data[2 + idx * 2] | ((data[3 + idx * 2] & 0x7f) << 8));
 	wacom_report_abs(wcombo, ABS_Y,
-		(data[6 + idx * 2] & 0xff) | ((data[7 + idx * 2] & 0x7f) << 8));
+		data[6 + idx * 2] | ((data[7 + idx * 2] & 0x7f) << 8));
 	wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]);
 	wacom_report_key(wcombo, wacom->tool[idx], 1);
 	if (idx)
@@ -782,31 +744,24 @@ static int wacom_tpc_irq(struct wacom_wac *wacom, void *wcombo)
 
 		touchInProx = 0;
 
-		if (prox) { /* in prox */
-			if (!wacom->id[0]) {
-				/* Going into proximity select tool */
-				wacom->tool[0] = (data[1] & 0x0c) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
-				if (wacom->tool[0] == BTN_TOOL_PEN)
-					wacom->id[0] = STYLUS_DEVICE_ID;
-				else
-					wacom->id[0] = ERASER_DEVICE_ID;
-			}
-			wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02);
-			wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x10);
-			wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[2]));
-			wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4]));
-			pressure = ((data[7] & 0x01) << 8) | data[6];
-			if (pressure < 0)
-				pressure = features->pressure_max + pressure + 1;
-			wacom_report_abs(wcombo, ABS_PRESSURE, pressure);
-			wacom_report_key(wcombo, BTN_TOUCH, data[1] & 0x05);
-		} else {
-			wacom_report_abs(wcombo, ABS_X, 0);
-			wacom_report_abs(wcombo, ABS_Y, 0);
-			wacom_report_abs(wcombo, ABS_PRESSURE, 0);
-			wacom_report_key(wcombo, BTN_STYLUS, 0);
-			wacom_report_key(wcombo, BTN_STYLUS2, 0);
-			wacom_report_key(wcombo, BTN_TOUCH, 0);
+		if (!wacom->id[0]) { /* first in prox */
+			/* Going into proximity select tool */
+			wacom->tool[0] = (data[1] & 0x0c) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
+			if (wacom->tool[0] == BTN_TOOL_PEN)
+				wacom->id[0] = STYLUS_DEVICE_ID;
+			else
+				wacom->id[0] = ERASER_DEVICE_ID;
+		}
+		wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02);
+		wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x10);
+		wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[2]));
+		wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4]));
+		pressure = ((data[7] & 0x01) << 8) | data[6];
+		if (pressure < 0)
+			pressure = features->pressure_max + pressure + 1;
+		wacom_report_abs(wcombo, ABS_PRESSURE, pressure);
+		wacom_report_key(wcombo, BTN_TOUCH, data[1] & 0x05);
+		if (!prox) { /* out-prox */
 			wacom->id[0] = 0;
 			/* pen is out so touch can be enabled now */
 			touchInProx = 1;
@@ -1028,7 +983,7 @@ static const struct wacom_features wacom_features_0x93 =
 static const struct wacom_features wacom_features_0x9A =
 	{ "Wacom ISDv4 9A",       WACOM_PKGLEN_GRAPHIRE,  26202, 16325,  255,  0, TABLETPC };
 static const struct wacom_features wacom_features_0x9F =
-	{ "Wacom ISDv4 9F",       WACOM_PKGLEN_PENABLED,  26202, 16325,  255,  0, TABLETPC };
+	{ "Wacom ISDv4 9F",       WACOM_PKGLEN_GRAPHIRE,  26202, 16325,  255,  0, TABLETPC };
 static const struct wacom_features wacom_features_0xE2 =
 	{ "Wacom ISDv4 E2",       WACOM_PKGLEN_TPC2FG,    26202, 16325,  255,  0, TABLETPC2FG };
 static const struct wacom_features wacom_features_0xE3 =
diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
index 8590b1e8ec37..b50cf04e61a8 100644
--- a/drivers/input/tablet/wacom_wac.h
+++ b/drivers/input/tablet/wacom_wac.h
@@ -17,7 +17,6 @@
 #define WACOM_PKGLEN_GRAPHIRE	 8
 #define WACOM_PKGLEN_BBFUN	 9
 #define WACOM_PKGLEN_INTUOS	10
-#define WACOM_PKGLEN_PENABLED	 8
 #define WACOM_PKGLEN_TPC1FG	 5
 #define WACOM_PKGLEN_TPC2FG	14
 
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 7208654a94ae..8a8fa4d2d6a8 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -24,17 +24,18 @@ config TOUCHSCREEN_88PM860X
 	  module will be called 88pm860x-ts.
 
 config TOUCHSCREEN_ADS7846
-	tristate "ADS7846/TSC2046 and ADS7843 based touchscreens"
+	tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
 	depends on SPI_MASTER
 	depends on HWMON = n || HWMON
 	help
 	  Say Y here if you have a touchscreen interface using the
-	  ADS7846/TSC2046 or ADS7843 controller, and your board-specific
-	  setup code includes that in its table of SPI devices.
+	  ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
+	  and your board-specific setup code includes that in its
+	  table of SPI devices.
 
 	  If HWMON is selected, and the driver is told the reference voltage
 	  on your board, you will also get hwmon interfaces for the voltage
-	  (and on ads7846/tsc2046, temperature) sensors of this chip.
+	  (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
 
 	  If unsure, say N (but it's safe to say "Y").
 
diff --git a/drivers/input/touchscreen/ad7877.c b/drivers/input/touchscreen/ad7877.c
index eb83939c705e..e019d53d1ab4 100644
--- a/drivers/input/touchscreen/ad7877.c
+++ b/drivers/input/touchscreen/ad7877.c
@@ -46,7 +46,7 @@
 #include <linux/spi/ad7877.h>
 #include <asm/irq.h>
 
-#define	TS_PEN_UP_TIMEOUT	msecs_to_jiffies(50)
+#define	TS_PEN_UP_TIMEOUT	msecs_to_jiffies(100)
 
 #define MAX_SPI_FREQ_HZ			20000000
 #define	MAX_12BIT			((1<<12)-1)
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 8b05d8e97543..532279cda0e4 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -36,6 +36,7 @@
  * TSC2046 is just newer ads7846 silicon.
  * Support for ads7843 tested on Atmel at91sam926x-EK.
  * Support for ads7845 has only been stubbed in.
+ * Support for Analog Devices AD7873 and AD7843 tested.
  *
  * IRQ handling needs a workaround because of a shortcoming in handling
  * edge triggered IRQs on some platforms like the OMAP1/2. These
@@ -821,6 +822,9 @@ static int ads7846_suspend(struct spi_device *spi, pm_message_t message)
 
 	spin_unlock_irq(&ts->lock);
 
+	if (device_may_wakeup(&ts->spi->dev))
+		enable_irq_wake(ts->spi->irq);
+
 	return 0;
 
 }
@@ -829,6 +833,9 @@ static int ads7846_resume(struct spi_device *spi)
 {
 	struct ads7846 *ts = dev_get_drvdata(&spi->dev);
 
+	if (device_may_wakeup(&ts->spi->dev))
+		disable_irq_wake(ts->spi->irq);
+
 	spin_lock_irq(&ts->lock);
 
 	ts->is_suspended = 0;
@@ -984,6 +991,15 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 
 	vref = pdata->keep_vref_on;
 
+	if (ts->model == 7873) {
+		/* The AD7873 is almost identical to the ADS7846
+		 * keep VREF off during differential/ratiometric
+		 * conversion modes
+		 */
+		ts->model = 7846;
+		vref = 0;
+	}
+
 	/* set up the transfers to read touchscreen state; this assumes we
 	 * use formula #2 for pressure, not #3.
 	 */
@@ -1191,6 +1207,8 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 	if (err)
 		goto err_remove_attr_group;
 
+	device_init_wakeup(&spi->dev, pdata->wakeup);
+
 	return 0;
 
  err_remove_attr_group:
@@ -1220,6 +1238,8 @@ static int __devexit ads7846_remove(struct spi_device *spi)
 {
 	struct ads7846		*ts = dev_get_drvdata(&spi->dev);
 
+	device_init_wakeup(&spi->dev, false);
+
 	ads784x_hwmon_unregister(spi, ts);
 	input_unregister_device(ts->input);
 
diff --git a/drivers/isdn/gigaset/capi.c b/drivers/isdn/gigaset/capi.c
index 6643d6533ccb..0220c19351d9 100644
--- a/drivers/isdn/gigaset/capi.c
+++ b/drivers/isdn/gigaset/capi.c
@@ -1301,7 +1301,7 @@ static void do_connect_req(struct gigaset_capi_ctr *iif,
 	}
 
 	/* check parameter: CIP Value */
-	if (cmsg->CIPValue > ARRAY_SIZE(cip2bchlc) ||
+	if (cmsg->CIPValue >= ARRAY_SIZE(cip2bchlc) ||
 	    (cmsg->CIPValue > 0 && cip2bchlc[cmsg->CIPValue].bc == NULL)) {
 		dev_notice(cs->dev, "%s: unknown CIP value %d\n",
 			   "CONNECT_REQ", cmsg->CIPValue);
@@ -2191,36 +2191,24 @@ static const struct file_operations gigaset_proc_fops = {
 	.release	= single_release,
 };
 
-static struct capi_driver capi_driver_gigaset = {
-	.name		= "gigaset",
-	.revision	= "1.0",
-};
-
 /**
- * gigaset_isdn_register() - register to LL
+ * gigaset_isdn_regdev() - register device to LL
  * @cs:		device descriptor structure.
  * @isdnid:	device name.
  *
- * Called by main module to register the device with the LL.
- *
  * Return value: 1 for success, 0 for failure
  */
-int gigaset_isdn_register(struct cardstate *cs, const char *isdnid)
+int gigaset_isdn_regdev(struct cardstate *cs, const char *isdnid)
 {
 	struct gigaset_capi_ctr *iif;
 	int rc;
 
-	pr_info("Kernel CAPI interface\n");
-
 	iif = kmalloc(sizeof(*iif), GFP_KERNEL);
 	if (!iif) {
 		pr_err("%s: out of memory\n", __func__);
 		return 0;
 	}
 
-	/* register driver with CAPI (ToDo: what for?) */
-	register_capi_driver(&capi_driver_gigaset);
-
 	/* prepare controller structure */
 	iif->ctr.owner         = THIS_MODULE;
 	iif->ctr.driverdata    = cs;
@@ -2241,7 +2229,6 @@ int gigaset_isdn_register(struct cardstate *cs, const char *isdnid)
 	rc = attach_capi_ctr(&iif->ctr);
 	if (rc) {
 		pr_err("attach_capi_ctr failed (%d)\n", rc);
-		unregister_capi_driver(&capi_driver_gigaset);
 		kfree(iif);
 		return 0;
 	}
@@ -2252,17 +2239,36 @@ int gigaset_isdn_register(struct cardstate *cs, const char *isdnid)
 }
 
 /**
- * gigaset_isdn_unregister() - unregister from LL
+ * gigaset_isdn_unregdev() - unregister device from LL
  * @cs:		device descriptor structure.
- *
- * Called by main module to unregister the device from the LL.
  */
-void gigaset_isdn_unregister(struct cardstate *cs)
+void gigaset_isdn_unregdev(struct cardstate *cs)
 {
 	struct gigaset_capi_ctr *iif = cs->iif;
 
 	detach_capi_ctr(&iif->ctr);
 	kfree(iif);
 	cs->iif = NULL;
+}
+
+static struct capi_driver capi_driver_gigaset = {
+	.name		= "gigaset",
+	.revision	= "1.0",
+};
+
+/**
+ * gigaset_isdn_regdrv() - register driver to LL
+ */
+void gigaset_isdn_regdrv(void)
+{
+	pr_info("Kernel CAPI interface\n");
+	register_capi_driver(&capi_driver_gigaset);
+}
+
+/**
+ * gigaset_isdn_unregdrv() - unregister driver from LL
+ */
+void gigaset_isdn_unregdrv(void)
+{
 	unregister_capi_driver(&capi_driver_gigaset);
 }
diff --git a/drivers/isdn/gigaset/common.c b/drivers/isdn/gigaset/common.c
index 85de3399a2f2..bdc01cb9f0ab 100644
--- a/drivers/isdn/gigaset/common.c
+++ b/drivers/isdn/gigaset/common.c
@@ -507,7 +507,7 @@ void gigaset_freecs(struct cardstate *cs)
 	case 2: /* error in initcshw */
 		/* Deregister from LL */
 		make_invalid(cs, VALID_ID);
-		gigaset_isdn_unregister(cs);
+		gigaset_isdn_unregdev(cs);
 
 		/* fall through */
 	case 1: /* error when registering to LL */
@@ -769,7 +769,7 @@ struct cardstate *gigaset_initcs(struct gigaset_driver *drv, int channels,
 	cs->cmdbytes = 0;
 
 	gig_dbg(DEBUG_INIT, "setting up iif");
-	if (!gigaset_isdn_register(cs, modulename)) {
+	if (!gigaset_isdn_regdev(cs, modulename)) {
 		pr_err("error registering ISDN device\n");
 		goto error;
 	}
@@ -1205,11 +1205,13 @@ static int __init gigaset_init_module(void)
 		gigaset_debuglevel = DEBUG_DEFAULT;
 
 	pr_info(DRIVER_DESC DRIVER_DESC_DEBUG "\n");
+	gigaset_isdn_regdrv();
 	return 0;
 }
 
 static void __exit gigaset_exit_module(void)
 {
+	gigaset_isdn_unregdrv();
 }
 
 module_init(gigaset_init_module);
diff --git a/drivers/isdn/gigaset/dummyll.c b/drivers/isdn/gigaset/dummyll.c
index 5b27c996af6d..bd0b1eaa7572 100644
--- a/drivers/isdn/gigaset/dummyll.c
+++ b/drivers/isdn/gigaset/dummyll.c
@@ -57,12 +57,20 @@ void gigaset_isdn_stop(struct cardstate *cs)
 {
 }
 
-int gigaset_isdn_register(struct cardstate *cs, const char *isdnid)
+int gigaset_isdn_regdev(struct cardstate *cs, const char *isdnid)
 {
-	pr_info("no ISDN subsystem interface\n");
 	return 1;
 }
 
-void gigaset_isdn_unregister(struct cardstate *cs)
+void gigaset_isdn_unregdev(struct cardstate *cs)
+{
+}
+
+void gigaset_isdn_regdrv(void)
+{
+	pr_info("no ISDN subsystem interface\n");
+}
+
+void gigaset_isdn_unregdrv(void)
 {
 }
diff --git a/drivers/isdn/gigaset/ev-layer.c b/drivers/isdn/gigaset/ev-layer.c
index c8f89b78b233..206c380c5235 100644
--- a/drivers/isdn/gigaset/ev-layer.c
+++ b/drivers/isdn/gigaset/ev-layer.c
@@ -1258,14 +1258,10 @@ static void do_action(int action, struct cardstate *cs,
 		 * note that bcs may be NULL if no B channel is free
 		 */
 		at_state2->ConState = 700;
-		kfree(at_state2->str_var[STR_NMBR]);
-		at_state2->str_var[STR_NMBR] = NULL;
-		kfree(at_state2->str_var[STR_ZCPN]);
-		at_state2->str_var[STR_ZCPN] = NULL;
-		kfree(at_state2->str_var[STR_ZBC]);
-		at_state2->str_var[STR_ZBC] = NULL;
-		kfree(at_state2->str_var[STR_ZHLC]);
-		at_state2->str_var[STR_ZHLC] = NULL;
+		for (i = 0; i < STR_NUM; ++i) {
+			kfree(at_state2->str_var[i]);
+			at_state2->str_var[i] = NULL;
+		}
 		at_state2->int_var[VAR_ZCTP] = -1;
 
 		spin_lock_irqsave(&cs->lock, flags);
diff --git a/drivers/isdn/gigaset/gigaset.h b/drivers/isdn/gigaset/gigaset.h
index 1875ab80b335..cdd144ecdc5f 100644
--- a/drivers/isdn/gigaset/gigaset.h
+++ b/drivers/isdn/gigaset/gigaset.h
@@ -675,8 +675,10 @@ int gigaset_isowbuf_getbytes(struct isowbuf_t *iwb, int size);
  */
 
 /* Called from common.c for setting up/shutting down with the ISDN subsystem */
-int gigaset_isdn_register(struct cardstate *cs, const char *isdnid);
-void gigaset_isdn_unregister(struct cardstate *cs);
+void gigaset_isdn_regdrv(void);
+void gigaset_isdn_unregdrv(void);
+int gigaset_isdn_regdev(struct cardstate *cs, const char *isdnid);
+void gigaset_isdn_unregdev(struct cardstate *cs);
 
 /* Called from hardware module to indicate completion of an skb */
 void gigaset_skb_sent(struct bc_state *bcs, struct sk_buff *skb);
diff --git a/drivers/isdn/gigaset/i4l.c b/drivers/isdn/gigaset/i4l.c
index f0acb9dc9e33..c22e5ace8276 100644
--- a/drivers/isdn/gigaset/i4l.c
+++ b/drivers/isdn/gigaset/i4l.c
@@ -592,15 +592,13 @@ void gigaset_isdn_stop(struct cardstate *cs)
 }
 
 /**
- * gigaset_isdn_register() - register to LL
+ * gigaset_isdn_regdev() - register to LL
  * @cs:		device descriptor structure.
  * @isdnid:	device name.
  *
- * Called by main module to register the device with the LL.
- *
  * Return value: 1 for success, 0 for failure
  */
-int gigaset_isdn_register(struct cardstate *cs, const char *isdnid)
+int gigaset_isdn_regdev(struct cardstate *cs, const char *isdnid)
 {
 	isdn_if *iif;
 
@@ -650,15 +648,29 @@ int gigaset_isdn_register(struct cardstate *cs, const char *isdnid)
 }
 
 /**
- * gigaset_isdn_unregister() - unregister from LL
+ * gigaset_isdn_unregdev() - unregister device from LL
  * @cs:		device descriptor structure.
- *
- * Called by main module to unregister the device from the LL.
  */
-void gigaset_isdn_unregister(struct cardstate *cs)
+void gigaset_isdn_unregdev(struct cardstate *cs)
 {
 	gig_dbg(DEBUG_CMD, "sending UNLOAD");
 	gigaset_i4l_cmd(cs, ISDN_STAT_UNLOAD);
 	kfree(cs->iif);
 	cs->iif = NULL;
 }
+
+/**
+ * gigaset_isdn_regdrv() - register driver to LL
+ */
+void gigaset_isdn_regdrv(void)
+{
+	/* nothing to do */
+}
+
+/**
+ * gigaset_isdn_unregdrv() - unregister driver from LL
+ */
+void gigaset_isdn_unregdrv(void)
+{
+	/* nothing to do */
+}
diff --git a/drivers/isdn/gigaset/interface.c b/drivers/isdn/gigaset/interface.c
index a1bcbc21ff71..f0dc6c9cc283 100644
--- a/drivers/isdn/gigaset/interface.c
+++ b/drivers/isdn/gigaset/interface.c
@@ -628,7 +628,6 @@ void gigaset_if_receive(struct cardstate *cs,
 	if (tty == NULL)
 		gig_dbg(DEBUG_IF, "receive on closed device");
 	else {
-		tty_buffer_request_room(tty, len);
 		tty_insert_flip_string(tty, buffer, len);
 		tty_flip_buffer_push(tty);
 	}
diff --git a/drivers/isdn/hardware/eicon/message.c b/drivers/isdn/hardware/eicon/message.c
index ae89fb89da64..341ef17c22ac 100644
--- a/drivers/isdn/hardware/eicon/message.c
+++ b/drivers/isdn/hardware/eicon/message.c
@@ -2754,7 +2754,7 @@ static byte connect_b3_req(dword Id, word Number, DIVA_CAPI_ADAPTER *a,
                     for (i = 0; i < w; i++)
                       ((T30_INFO   *)(plci->fax_connect_info_buffer))->station_id[i] = fax_parms[4].info[1+i];
                     ((T30_INFO   *)(plci->fax_connect_info_buffer))->head_line_len = 0;
-                    len = offsetof(T30_INFO, station_id) + 20;
+                    len = offsetof(T30_INFO, station_id) + T30_MAX_STATION_ID_LENGTH;
                     w = fax_parms[5].length;
                     if (w > 20)
                       w = 20;
@@ -2892,7 +2892,7 @@ static byte connect_b3_res(dword Id, word Number, DIVA_CAPI_ADAPTER *a,
     && (plci->nsf_control_bits & T30_NSF_CONTROL_BIT_ENABLE_NSF)
     && (plci->nsf_control_bits & T30_NSF_CONTROL_BIT_NEGOTIATE_RESP))
    {
-            len = offsetof(T30_INFO, station_id) + 20;
+            len = offsetof(T30_INFO, station_id) + T30_MAX_STATION_ID_LENGTH;
             if (plci->fax_connect_info_length < len)
             {
               ((T30_INFO *)(plci->fax_connect_info_buffer))->station_id_len = 0;
@@ -3802,7 +3802,7 @@ static byte manufacturer_res(dword Id, word Number, DIVA_CAPI_ADAPTER *a,
       break;
     }
     ncpi = &m_parms[1];
-    len = offsetof(T30_INFO, station_id) + 20;
+    len = offsetof(T30_INFO, station_id) + T30_MAX_STATION_ID_LENGTH;
     if (plci->fax_connect_info_length < len)
     {
       ((T30_INFO *)(plci->fax_connect_info_buffer))->station_id_len = 0;
@@ -6830,7 +6830,7 @@ static void nl_ind(PLCI *plci)
         if(((T30_INFO   *)plci->NL.RBuffer->P)->station_id_len)
         {
           plci->ncpi_buffer[len] = 20;
-          for (i = 0; i < 20; i++)
+          for (i = 0; i < T30_MAX_STATION_ID_LENGTH; i++)
             plci->ncpi_buffer[++len] = ((T30_INFO   *)plci->NL.RBuffer->P)->station_id[i];
         }
         if (((plci->NL.Ind & 0x0f) == N_DISC) || ((plci->NL.Ind & 0x0f) == N_DISC_ACK))
@@ -6844,7 +6844,7 @@ static void nl_ind(PLCI *plci)
         if ((plci->requested_options_conn | plci->requested_options | a->requested_options_table[plci->appl->Id-1])
           & ((1L << PRIVATE_FAX_SUB_SEP_PWD) | (1L << PRIVATE_FAX_NONSTANDARD)))
         {
-          i = offsetof(T30_INFO, station_id) + 20 + ((T30_INFO   *)plci->NL.RBuffer->P)->head_line_len;
+          i = offsetof(T30_INFO, station_id) + T30_MAX_STATION_ID_LENGTH + ((T30_INFO   *)plci->NL.RBuffer->P)->head_line_len;
           while (i < plci->NL.RBuffer->length)
             plci->ncpi_buffer[++len] = plci->NL.RBuffer->P[i++];
         }
@@ -8400,7 +8400,7 @@ static word add_b23(PLCI *plci, API_PARSE *bp)
         }
       }
       /* copy station id to NLC */
-      for(i=0; i<20; i++)
+      for(i=0; i < T30_MAX_STATION_ID_LENGTH; i++)
       {
         if(i<b3_config_parms[2].length)
         {
@@ -8411,29 +8411,29 @@ static word add_b23(PLCI *plci, API_PARSE *bp)
           ((T30_INFO *)&nlc[1])->station_id[i] = ' ';
         }
       }
-      ((T30_INFO *)&nlc[1])->station_id_len = 20;
+      ((T30_INFO *)&nlc[1])->station_id_len = T30_MAX_STATION_ID_LENGTH;
       /* copy head line to NLC */
       if(b3_config_parms[3].length)
       {
 
-        pos = (byte)(fax_head_line_time (&(((T30_INFO *)&nlc[1])->station_id[20])));
+        pos = (byte)(fax_head_line_time (&(((T30_INFO *)&nlc[1])->station_id[T30_MAX_STATION_ID_LENGTH])));
         if (pos != 0)
         {
           if (CAPI_MAX_DATE_TIME_LENGTH + 2 + b3_config_parms[3].length > CAPI_MAX_HEAD_LINE_SPACE)
             pos = 0;
           else
           {
-            ((T30_INFO *)&nlc[1])->station_id[20 + pos++] = ' ';
-            ((T30_INFO *)&nlc[1])->station_id[20 + pos++] = ' ';
+            nlc[1 + offsetof(T30_INFO, station_id) + T30_MAX_STATION_ID_LENGTH + pos++] = ' ';
+            nlc[1 + offsetof(T30_INFO, station_id) + T30_MAX_STATION_ID_LENGTH + pos++] = ' ';
             len = (byte)b3_config_parms[2].length;
             if (len > 20)
               len = 20;
             if (CAPI_MAX_DATE_TIME_LENGTH + 2 + len + 2 + b3_config_parms[3].length <= CAPI_MAX_HEAD_LINE_SPACE)
             {
               for (i = 0; i < len; i++)
-                ((T30_INFO *)&nlc[1])->station_id[20 + pos++] = ((byte   *)b3_config_parms[2].info)[1+i];
-              ((T30_INFO *)&nlc[1])->station_id[20 + pos++] = ' ';
-              ((T30_INFO *)&nlc[1])->station_id[20 + pos++] = ' ';
+                nlc[1 + offsetof(T30_INFO, station_id) + T30_MAX_STATION_ID_LENGTH + pos++] = ((byte   *)b3_config_parms[2].info)[1+i];
+              nlc[1 + offsetof(T30_INFO, station_id) + T30_MAX_STATION_ID_LENGTH + pos++] = ' ';
+              nlc[1 + offsetof(T30_INFO, station_id) + T30_MAX_STATION_ID_LENGTH + pos++] = ' ';
             }
           }
         }
@@ -8444,9 +8444,8 @@ static word add_b23(PLCI *plci, API_PARSE *bp)
         ((T30_INFO *)&nlc[1])->head_line_len = (byte)(pos + len);
         nlc[0] += (byte)(pos + len);
         for (i = 0; i < len; i++)
-          ((T30_INFO *)&nlc[1])->station_id[20 + pos++] = ((byte   *)b3_config_parms[3].info)[1+i];
-        }
-      else
+          nlc[1 + offsetof(T30_INFO, station_id) + T30_MAX_STATION_ID_LENGTH + pos++] =  ((byte   *)b3_config_parms[3].info)[1+i];
+      } else
         ((T30_INFO *)&nlc[1])->head_line_len = 0;
 
       plci->nsf_control_bits = 0;
@@ -8473,7 +8472,7 @@ static word add_b23(PLCI *plci, API_PARSE *bp)
             fax_control_bits |= T30_CONTROL_BIT_ACCEPT_SEL_POLLING;
           }
             len = nlc[0];
-          pos = offsetof(T30_INFO, station_id) + 20;
+          pos = offsetof(T30_INFO, station_id) + T30_MAX_STATION_ID_LENGTH;
    if (pos < plci->fax_connect_info_length)
    {
      for (i = 1 + plci->fax_connect_info_buffer[pos]; i != 0; i--)
@@ -8525,7 +8524,7 @@ static word add_b23(PLCI *plci, API_PARSE *bp)
       }
 
       PUT_WORD(&(((T30_INFO *)&nlc[1])->control_bits_low), fax_control_bits);
-      len = offsetof(T30_INFO, station_id) + 20;
+      len = offsetof(T30_INFO, station_id) + T30_MAX_STATION_ID_LENGTH;
       for (i = 0; i < len; i++)
         plci->fax_connect_info_buffer[i] = nlc[1+i];
       ((T30_INFO   *) plci->fax_connect_info_buffer)->head_line_len = 0;
diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c
index ad36df9b759c..8affba3e569d 100644
--- a/drivers/isdn/hardware/mISDN/hfcmulti.c
+++ b/drivers/isdn/hardware/mISDN/hfcmulti.c
@@ -5265,6 +5265,8 @@ static const struct hm_map hfcm_map[] = {
 /*31*/	{VENDOR_CCD, "XHFC-4S Speech Design", 5, 4, 0, 0, 0, 0,
 		HFC_IO_MODE_EMBSD, XHFC_IRQ},
 /*32*/	{VENDOR_JH, "HFC-8S (junghanns)", 8, 8, 1, 0, 0, 0, 0, 0},
+/*33*/	{VENDOR_BN, "HFC-2S Beronet Card PCIe", 4, 2, 1, 3, 0, DIP_4S, 0, 0},
+/*34*/	{VENDOR_BN, "HFC-4S Beronet Card PCIe", 4, 4, 1, 2, 0, DIP_4S, 0, 0},
 };
 
 #undef H
@@ -5300,6 +5302,10 @@ static struct pci_device_id hfmultipci_ids[] __devinitdata = {
 		PCI_SUBDEVICE_ID_CCD_OV4S, 0, 0, H(28)}, /* OpenVox 4 */
 	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
 		PCI_SUBDEVICE_ID_CCD_OV2S, 0, 0, H(29)}, /* OpenVox 2 */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+		0xb761, 0, 0, H(33)}, /* BN2S PCIe */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+		0xb762, 0, 0, H(34)}, /* BN4S PCIe */
 
 	/* Cards with HFC-8S Chip */
 	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
diff --git a/drivers/isdn/hardware/mISDN/mISDNisar.c b/drivers/isdn/hardware/mISDN/mISDNisar.c
index 09095c747110..f0bc6fa95809 100644
--- a/drivers/isdn/hardware/mISDN/mISDNisar.c
+++ b/drivers/isdn/hardware/mISDN/mISDNisar.c
@@ -1712,13 +1712,13 @@ mISDNisar_init(struct isar_hw *isar, void *hw)
 }
 EXPORT_SYMBOL(mISDNisar_init);
 
-static int isar_mod_init(void)
+static int __init isar_mod_init(void)
 {
 	pr_notice("mISDN: ISAR driver Rev. %s\n", ISAR_REV);
 	return 0;
 }
 
-static void isar_mod_cleanup(void)
+static void __exit isar_mod_cleanup(void)
 {
 	pr_notice("mISDN: ISAR module unloaded\n");
 }
diff --git a/drivers/isdn/hysdn/hysdn_boot.c b/drivers/isdn/hysdn/hysdn_boot.c
index be787e16bb79..4f541ef14f9e 100644
--- a/drivers/isdn/hysdn/hysdn_boot.c
+++ b/drivers/isdn/hysdn/hysdn_boot.c
@@ -143,7 +143,7 @@ pof_handle_data(hysdn_card * card, int datlen)
 					     (boot->pof_recid == TAG_CABSDATA) ? "CABSDATA" : "ABSDATA",
 					     datlen, boot->pof_recoffset);
 
-			if ((boot->last_error = card->writebootseq(card, boot->buf.BootBuf, datlen) < 0))
+			if ((boot->last_error = card->writebootseq(card, boot->buf.BootBuf, datlen)) < 0)
 				return (boot->last_error);	/* error writing data */
 
 			if (boot->pof_recoffset + datlen >= boot->pof_reclen)
diff --git a/drivers/isdn/i4l/isdn_common.c b/drivers/isdn/i4l/isdn_common.c
index adb1e8c36b46..00c60e2e0ff7 100644
--- a/drivers/isdn/i4l/isdn_common.c
+++ b/drivers/isdn/i4l/isdn_common.c
@@ -1347,7 +1347,7 @@ isdn_ioctl(struct inode *inode, struct file *file, uint cmd, ulong arg)
 /*
  * isdn net devices manage lots of configuration variables as linked lists.
  * Those lists must only be manipulated from user space. Some of the ioctl's
- * service routines access user space and are not atomic. Therefor, ioctl's
+ * service routines access user space and are not atomic. Therefore, ioctl's
  * manipulating the lists and ioctl's sleeping while accessing the lists
  * are serialized by means of a semaphore.
  */
diff --git a/drivers/isdn/mISDN/dsp_core.c b/drivers/isdn/mISDN/dsp_core.c
index 43ff4d3b046e..6eac588e0a37 100644
--- a/drivers/isdn/mISDN/dsp_core.c
+++ b/drivers/isdn/mISDN/dsp_core.c
@@ -1114,7 +1114,7 @@ static struct Bprotocol DSP = {
 	.create = dspcreate
 };
 
-static int dsp_init(void)
+static int __init dsp_init(void)
 {
 	int err;
 	int tics;
@@ -1212,7 +1212,7 @@ static int dsp_init(void)
 }
 
 
-static void dsp_cleanup(void)
+static void __exit dsp_cleanup(void)
 {
 	mISDN_unregister_Bprotocol(&DSP);
 
diff --git a/drivers/isdn/mISDN/l1oip_core.c b/drivers/isdn/mISDN/l1oip_core.c
index f1e8af54dff0..325b1ad7d4b8 100644
--- a/drivers/isdn/mISDN/l1oip_core.c
+++ b/drivers/isdn/mISDN/l1oip_core.c
@@ -477,7 +477,7 @@ l1oip_socket_parse(struct l1oip *hc, struct sockaddr_in *sin, u8 *buf, int len)
 		printk(KERN_DEBUG "%s: received frame, parsing... (%d)\n",
 			__func__, len);
 
-	/* check lenght */
+	/* check length */
 	if (len < 1+1+2) {
 		printk(KERN_WARNING "%s: packet error - length %d below "
 			"4 bytes\n", __func__, len);
@@ -1509,7 +1509,7 @@ l1oip_init(void)
 			printk(KERN_DEBUG "%s: interface %d is %s with %s.\n",
 			    __func__, l1oip_cnt, pri ? "PRI" : "BRI",
 			    bundle ? "bundled IP packet for all B-channels" :
-			    "seperate IP packets for every B-channel");
+			    "separate IP packets for every B-channel");
 
 		hc = kzalloc(sizeof(struct l1oip), GFP_ATOMIC);
 		if (!hc) {
diff --git a/drivers/isdn/sc/hardware.h b/drivers/isdn/sc/hardware.h
index 9e6d5302bf8e..627324856ead 100644
--- a/drivers/isdn/sc/hardware.h
+++ b/drivers/isdn/sc/hardware.h
@@ -87,7 +87,7 @@
 #define BRI_CHANNELS	2		/* Number of B channels */
 #define BRI_BASEPG_VAL	0x98
 #define BRI_MAGIC	0x60000		/* Magic Number */
-#define BRI_MEMSIZE	0x10000		/* Ammount of RAM (64K) */
+#define BRI_MEMSIZE	0x10000		/* Amount of RAM (64K) */
 #define BRI_PARTNO	"72-029"
 #define BRI_FEATURES	ISDN_FEATURE_L2_HDLC | ISDN_FEATURE_L3_TRANS;
 /*
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index e0b64312e66a..505eb64c329c 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -15,6 +15,8 @@ config LEDS_CLASS
 	  This option enables the led sysfs class in /sys/class/leds.  You'll
 	  need this to do anything useful with LEDs.  If unsure, say N.
 
+if LEDS_CLASS
+
 comment "LED drivers"
 
 config LEDS_88PM860X
@@ -26,73 +28,73 @@ config LEDS_88PM860X
 
 config LEDS_ATMEL_PWM
 	tristate "LED Support using Atmel PWM outputs"
-	depends on LEDS_CLASS && ATMEL_PWM
+	depends on ATMEL_PWM
 	help
 	  This option enables support for LEDs driven using outputs
 	  of the dedicated PWM controller found on newer Atmel SOCs.
 
 config LEDS_LOCOMO
 	tristate "LED Support for Locomo device"
-	depends on LEDS_CLASS && SHARP_LOCOMO
+	depends on SHARP_LOCOMO
 	help
 	  This option enables support for the LEDs on Sharp Locomo.
 	  Zaurus models SL-5500 and SL-5600.
 
 config LEDS_MIKROTIK_RB532
 	tristate "LED Support for Mikrotik Routerboard 532"
-	depends on LEDS_CLASS && MIKROTIK_RB532
+	depends on MIKROTIK_RB532
 	help
 	  This option enables support for the so called "User LED" of
 	  Mikrotik's Routerboard 532.
 
 config LEDS_S3C24XX
 	tristate "LED Support for Samsung S3C24XX GPIO LEDs"
-	depends on LEDS_CLASS && ARCH_S3C2410
+	depends on ARCH_S3C2410
 	help
 	  This option enables support for LEDs connected to GPIO lines
 	  on Samsung S3C24XX series CPUs, such as the S3C2410 and S3C2440.
 
 config LEDS_AMS_DELTA
 	tristate "LED Support for the Amstrad Delta (E3)"
-	depends on LEDS_CLASS && MACH_AMS_DELTA
+	depends on MACH_AMS_DELTA
 	help
 	  This option enables support for the LEDs on Amstrad Delta (E3).
 
 config LEDS_NET48XX
 	tristate "LED Support for Soekris net48xx series Error LED"
-	depends on LEDS_CLASS && SCx200_GPIO
+	depends on SCx200_GPIO
 	help
 	  This option enables support for the Soekris net4801 and net4826 error
 	  LED.
 
 config LEDS_FSG
 	tristate "LED Support for the Freecom FSG-3"
-	depends on LEDS_CLASS && MACH_FSG
+	depends on MACH_FSG
 	help
 	  This option enables support for the LEDs on the Freecom FSG-3.
 
 config LEDS_WRAP
 	tristate "LED Support for the WRAP series LEDs"
-	depends on LEDS_CLASS && SCx200_GPIO
+	depends on SCx200_GPIO
 	help
 	  This option enables support for the PCEngines WRAP programmable LEDs.
 
 config LEDS_ALIX2
 	tristate "LED Support for ALIX.2 and ALIX.3 series"
-	depends on LEDS_CLASS && X86 && EXPERIMENTAL
+	depends on X86 && !GPIO_CS5535 && !CS5535_GPIO
 	help
 	  This option enables support for the PCEngines ALIX.2 and ALIX.3 LEDs.
 	  You have to set leds-alix2.force=1 for boards with Award BIOS.
 
 config LEDS_H1940
 	tristate "LED Support for iPAQ H1940 device"
-	depends on LEDS_CLASS && ARCH_H1940
+	depends on ARCH_H1940
 	help
 	  This option enables support for the LEDs on the h1940.
 
 config LEDS_COBALT_QUBE
 	tristate "LED Support for the Cobalt Qube series front LED"
-	depends on LEDS_CLASS && MIPS_COBALT
+	depends on MIPS_COBALT
 	help
 	  This option enables support for the front LED on Cobalt Qube series
 
@@ -105,7 +107,7 @@ config LEDS_COBALT_RAQ
 
 config LEDS_SUNFIRE
 	tristate "LED support for SunFire servers."
-	depends on LEDS_CLASS && SPARC64
+	depends on SPARC64
 	select LEDS_TRIGGERS
 	help
 	  This option enables support for the Left, Middle, and Right
@@ -113,14 +115,14 @@ config LEDS_SUNFIRE
 
 config LEDS_HP6XX
 	tristate "LED Support for the HP Jornada 6xx"
-	depends on LEDS_CLASS && SH_HP6XX
+	depends on SH_HP6XX
 	help
 	  This option enables LED support for the handheld
 	  HP Jornada 620/660/680/690.
 
 config LEDS_PCA9532
 	tristate "LED driver for PCA9532 dimmer"
-	depends on LEDS_CLASS && I2C && INPUT && EXPERIMENTAL
+	depends on I2C && INPUT && EXPERIMENTAL
 	help
 	  This option enables support for NXP pca9532
 	  LED controller. It is generally only useful
@@ -128,7 +130,7 @@ config LEDS_PCA9532
 
 config LEDS_GPIO
 	tristate "LED Support for GPIO connected LEDs"
-	depends on LEDS_CLASS && GENERIC_GPIO
+	depends on GENERIC_GPIO
 	help
 	  This option enables support for the LEDs connected to GPIO
 	  outputs. To be useful the particular board must have LEDs
@@ -155,7 +157,7 @@ config LEDS_GPIO_OF
 
 config LEDS_LP3944
 	tristate "LED Support for N.S. LP3944 (Fun Light) I2C chip"
-	depends on LEDS_CLASS && I2C
+	depends on I2C
 	help
 	  This option enables support for LEDs connected to the National
 	  Semiconductor LP3944 Lighting Management Unit (LMU) also known as
@@ -166,7 +168,7 @@ config LEDS_LP3944
 
 config LEDS_CLEVO_MAIL
 	tristate "Mail LED on Clevo notebook"
-	depends on LEDS_CLASS && X86 && SERIO_I8042 && DMI
+	depends on X86 && SERIO_I8042 && DMI
 	help
 	  This driver makes the mail LED accessible from userspace
 	  programs through the leds subsystem. This LED have three
@@ -196,7 +198,7 @@ config LEDS_CLEVO_MAIL
 
 config LEDS_PCA955X
 	tristate "LED Support for PCA955x I2C chips"
-	depends on LEDS_CLASS && I2C
+	depends on I2C
 	help
 	  This option enables support for LEDs connected to PCA955x
 	  LED driver chips accessed via the I2C bus.  Supported
@@ -204,54 +206,54 @@ config LEDS_PCA955X
 
 config LEDS_WM831X_STATUS
 	tristate "LED support for status LEDs on WM831x PMICs"
-	depends on LEDS_CLASS && MFD_WM831X
+	depends on MFD_WM831X
 	help
 	  This option enables support for the status LEDs of the WM831x
           series of PMICs.
 
 config LEDS_WM8350
 	tristate "LED Support for WM8350 AudioPlus PMIC"
-	depends on LEDS_CLASS && MFD_WM8350
+	depends on MFD_WM8350
 	help
 	  This option enables support for LEDs driven by the Wolfson
 	  Microelectronics WM8350 AudioPlus PMIC.
 
 config LEDS_DA903X
 	tristate "LED Support for DA9030/DA9034 PMIC"
-	depends on LEDS_CLASS && PMIC_DA903X
+	depends on PMIC_DA903X
 	help
 	  This option enables support for on-chip LED drivers found
 	  on Dialog Semiconductor DA9030/DA9034 PMICs.
 
 config LEDS_DAC124S085
 	tristate "LED Support for DAC124S085 SPI DAC"
-	depends on LEDS_CLASS && SPI
+	depends on SPI
 	help
 	  This option enables support for DAC124S085 SPI DAC from NatSemi,
 	  which can be used to control up to four LEDs.
 
 config LEDS_PWM
 	tristate "PWM driven LED Support"
-	depends on LEDS_CLASS && HAVE_PWM
+	depends on HAVE_PWM
 	help
 	  This option enables support for pwm driven LEDs
 
 config LEDS_REGULATOR
 	tristate "REGULATOR driven LED support"
-	depends on LEDS_CLASS && REGULATOR
+	depends on REGULATOR
 	help
 	  This option enables support for regulator driven LEDs.
 
 config LEDS_BD2802
 	tristate "LED driver for BD2802 RGB LED"
-	depends on LEDS_CLASS && I2C
+	depends on I2C
 	help
 	  This option enables support for BD2802GU RGB LED driver chips
 	  accessed via the I2C bus.
 
 config LEDS_INTEL_SS4200
 	tristate "LED driver for Intel NAS SS4200 series"
-	depends on LEDS_CLASS && PCI && DMI
+	depends on PCI && DMI
 	help
 	  This option enables support for the Intel SS4200 series of
 	  Network Attached Storage servers.  You may control the hard
@@ -260,7 +262,7 @@ config LEDS_INTEL_SS4200
 
 config LEDS_LT3593
 	tristate "LED driver for LT3593 controllers"
-	depends on LEDS_CLASS && GENERIC_GPIO
+	depends on GENERIC_GPIO
 	help
 	  This option enables support for LEDs driven by a Linear Technology
 	  LT3593 controller. This controller uses a special one-wire pulse
@@ -268,7 +270,7 @@ config LEDS_LT3593
 
 config LEDS_ADP5520
 	tristate "LED Support for ADP5520/ADP5501 PMIC"
-	depends on LEDS_CLASS && PMIC_ADP5520
+	depends on PMIC_ADP5520
 	help
 	  This option enables support for on-chip LED drivers found
 	  on Analog Devices ADP5520/ADP5501 PMICs.
@@ -276,7 +278,12 @@ config LEDS_ADP5520
 	  To compile this driver as a module, choose M here: the module will
 	  be called leds-adp5520.
 
-comment "LED Triggers"
+config LEDS_DELL_NETBOOKS
+	tristate "External LED on Dell Business Netbooks"
+	depends on X86 && ACPI_WMI
+	help
+	  This adds support for the Latitude 2100 and similar
+	  notebooks that have an external LED.
 
 config LEDS_TRIGGERS
 	bool "LED Trigger support"
@@ -285,9 +292,12 @@ config LEDS_TRIGGERS
 	  These triggers allow kernel events to drive the LEDs and can
 	  be configured via sysfs. If unsure, say Y.
 
+if LEDS_TRIGGERS
+
+comment "LED Triggers"
+
 config LEDS_TRIGGER_TIMER
 	tristate "LED Timer Trigger"
-	depends on LEDS_TRIGGERS
 	help
 	  This allows LEDs to be controlled by a programmable timer
 	  via sysfs. Some LED hardware can be programmed to start
@@ -298,14 +308,13 @@ config LEDS_TRIGGER_TIMER
 
 config LEDS_TRIGGER_IDE_DISK
 	bool "LED IDE Disk Trigger"
-	depends on LEDS_TRIGGERS && IDE_GD_ATA
+	depends on IDE_GD_ATA
 	help
 	  This allows LEDs to be controlled by IDE disk activity.
 	  If unsure, say Y.
 
 config LEDS_TRIGGER_HEARTBEAT
 	tristate "LED Heartbeat Trigger"
-	depends on LEDS_TRIGGERS
 	help
 	  This allows LEDs to be controlled by a CPU load average.
 	  The flash frequency is a hyperbolic function of the 1-minute
@@ -314,7 +323,6 @@ config LEDS_TRIGGER_HEARTBEAT
 
 config LEDS_TRIGGER_BACKLIGHT
 	tristate "LED backlight Trigger"
-	depends on LEDS_TRIGGERS
 	help
 	  This allows LEDs to be controlled as a backlight device: they
 	  turn off and on when the display is blanked and unblanked.
@@ -323,7 +331,6 @@ config LEDS_TRIGGER_BACKLIGHT
 
 config LEDS_TRIGGER_GPIO
 	tristate "LED GPIO Trigger"
-	depends on LEDS_TRIGGERS
 	depends on GPIOLIB
 	help
 	  This allows LEDs to be controlled by gpio events. It's good
@@ -336,7 +343,6 @@ config LEDS_TRIGGER_GPIO
 
 config LEDS_TRIGGER_DEFAULT_ON
 	tristate "LED Default ON Trigger"
-	depends on LEDS_TRIGGERS
 	help
 	  This allows LEDs to be initialised in the ON state.
 	  If unsure, say Y.
@@ -344,4 +350,8 @@ config LEDS_TRIGGER_DEFAULT_ON
 comment "iptables trigger is under Netfilter config (LED target)"
 	depends on LEDS_TRIGGERS
 
+endif # LEDS_TRIGGERS
+
+endif # LEDS_CLASS
+
 endif # NEW_LEDS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index d76fb32b77c0..0cd8b9957380 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_LEDS_REGULATOR)		+= leds-regulator.o
 obj-$(CONFIG_LEDS_INTEL_SS4200)		+= leds-ss4200.o
 obj-$(CONFIG_LEDS_LT3593)		+= leds-lt3593.o
 obj-$(CONFIG_LEDS_ADP5520)		+= leds-adp5520.o
+obj-$(CONFIG_LEDS_DELL_NETBOOKS)	+= dell-led.o
 
 # LED SPI Drivers
 obj-$(CONFIG_LEDS_DAC124S085)		+= leds-dac124s085.o
diff --git a/drivers/leds/dell-led.c b/drivers/leds/dell-led.c
new file mode 100644
index 000000000000..ee310891fff8
--- /dev/null
+++ b/drivers/leds/dell-led.c
@@ -0,0 +1,200 @@
+/*
+ * dell_led.c - Dell LED Driver
+ *
+ * Copyright (C) 2010 Dell Inc.
+ * Louis Davis <louis_davis@dell.com>
+ * Jim Dailey <jim_dailey@dell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/acpi.h>
+#include <linux/leds.h>
+
+MODULE_AUTHOR("Louis Davis/Jim Dailey");
+MODULE_DESCRIPTION("Dell LED Control Driver");
+MODULE_LICENSE("GPL");
+
+#define DELL_LED_BIOS_GUID "F6E4FE6E-909D-47cb-8BAB-C9F6F2F8D396"
+MODULE_ALIAS("wmi:" DELL_LED_BIOS_GUID);
+
+/* Error Result Codes: */
+#define INVALID_DEVICE_ID	250
+#define INVALID_PARAMETER	251
+#define INVALID_BUFFER		252
+#define INTERFACE_ERROR		253
+#define UNSUPPORTED_COMMAND	254
+#define UNSPECIFIED_ERROR	255
+
+/* Device ID */
+#define DEVICE_ID_PANEL_BACK	1
+
+/* LED Commands */
+#define CMD_LED_ON	16
+#define CMD_LED_OFF	17
+#define CMD_LED_BLINK	18
+
+struct bios_args {
+	unsigned char length;
+	unsigned char result_code;
+	unsigned char device_id;
+	unsigned char command;
+	unsigned char on_time;
+	unsigned char off_time;
+};
+
+static int dell_led_perform_fn(u8 length,
+		u8 result_code,
+		u8 device_id,
+		u8 command,
+		u8 on_time,
+		u8 off_time)
+{
+	struct bios_args *bios_return;
+	u8 return_code;
+	union acpi_object *obj;
+	struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
+	struct acpi_buffer input;
+	acpi_status status;
+
+	struct bios_args args;
+	args.length = length;
+	args.result_code = result_code;
+	args.device_id = device_id;
+	args.command = command;
+	args.on_time = on_time;
+	args.off_time = off_time;
+
+	input.length = sizeof(struct bios_args);
+	input.pointer = &args;
+
+	status = wmi_evaluate_method(DELL_LED_BIOS_GUID,
+		1,
+		1,
+		&input,
+		&output);
+
+	if (ACPI_FAILURE(status))
+		return status;
+
+	obj = output.pointer;
+
+	if (!obj)
+		return -EINVAL;
+	else if (obj->type != ACPI_TYPE_BUFFER) {
+		kfree(obj);
+		return -EINVAL;
+	}
+
+	bios_return = ((struct bios_args *)obj->buffer.pointer);
+	return_code = bios_return->result_code;
+
+	kfree(obj);
+
+	return return_code;
+}
+
+static int led_on(void)
+{
+	return dell_led_perform_fn(3,	/* Length of command */
+		INTERFACE_ERROR,	/* Init to  INTERFACE_ERROR */
+		DEVICE_ID_PANEL_BACK,	/* Device ID */
+		CMD_LED_ON,		/* Command */
+		0,			/* not used */
+		0);			/* not used */
+}
+
+static int led_off(void)
+{
+	return dell_led_perform_fn(3,	/* Length of command */
+		INTERFACE_ERROR,	/* Init to  INTERFACE_ERROR */
+		DEVICE_ID_PANEL_BACK,	/* Device ID */
+		CMD_LED_OFF,		/* Command */
+		0,			/* not used */
+		0);			/* not used */
+}
+
+static int led_blink(unsigned char on_eighths,
+		unsigned char off_eighths)
+{
+	return dell_led_perform_fn(5,	/* Length of command */
+		INTERFACE_ERROR,	/* Init to  INTERFACE_ERROR */
+		DEVICE_ID_PANEL_BACK,	/* Device ID */
+		CMD_LED_BLINK,		/* Command */
+		on_eighths,		/* blink on in eigths of a second */
+		off_eighths);		/* blink off in eights of a second */
+}
+
+static void dell_led_set(struct led_classdev *led_cdev,
+		enum led_brightness value)
+{
+	if (value == LED_OFF)
+		led_off();
+	else
+		led_on();
+}
+
+static int dell_led_blink(struct led_classdev *led_cdev,
+		unsigned long *delay_on,
+		unsigned long *delay_off)
+{
+	unsigned long on_eighths;
+	unsigned long off_eighths;
+
+	/* The Dell LED delay is based on 125ms intervals.
+	   Need to round up to next interval. */
+
+	on_eighths = (*delay_on + 124) / 125;
+	if (0 == on_eighths)
+		on_eighths = 1;
+	if (on_eighths > 255)
+		on_eighths = 255;
+	*delay_on = on_eighths * 125;
+
+	off_eighths = (*delay_off + 124) / 125;
+	if (0 == off_eighths)
+		off_eighths = 1;
+	if (off_eighths > 255)
+		off_eighths = 255;
+	*delay_off = off_eighths * 125;
+
+	led_blink(on_eighths, off_eighths);
+
+	return 0;
+}
+
+static struct led_classdev dell_led = {
+	.name		= "dell::lid",
+	.brightness	= LED_OFF,
+	.max_brightness = 1,
+	.brightness_set = dell_led_set,
+	.blink_set	= dell_led_blink,
+	.flags		= LED_CORE_SUSPENDRESUME,
+};
+
+static int __init dell_led_init(void)
+{
+	int error = 0;
+
+	if (!wmi_has_guid(DELL_LED_BIOS_GUID))
+		return -ENODEV;
+
+	error = led_off();
+	if (error != 0)
+		return -ENODEV;
+
+	return led_classdev_register(NULL, &dell_led);
+}
+
+static void __exit dell_led_exit(void)
+{
+	led_classdev_unregister(&dell_led);
+
+	led_off();
+}
+
+module_init(dell_led_init);
+module_exit(dell_led_exit);
diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c
index 782f95822eab..69e7d86a5143 100644
--- a/drivers/leds/led-class.c
+++ b/drivers/leds/led-class.c
@@ -72,11 +72,14 @@ static ssize_t led_max_brightness_show(struct device *dev,
 	return sprintf(buf, "%u\n", led_cdev->max_brightness);
 }
 
-static DEVICE_ATTR(brightness, 0644, led_brightness_show, led_brightness_store);
-static DEVICE_ATTR(max_brightness, 0444, led_max_brightness_show, NULL);
+static struct device_attribute led_class_attrs[] = {
+	__ATTR(brightness, 0644, led_brightness_show, led_brightness_store),
+	__ATTR(max_brightness, 0644, led_max_brightness_show, NULL),
 #ifdef CONFIG_LEDS_TRIGGERS
-static DEVICE_ATTR(trigger, 0644, led_trigger_show, led_trigger_store);
+	__ATTR(trigger, 0644, led_trigger_show, led_trigger_store),
 #endif
+	__ATTR_NULL,
+};
 
 /**
  * led_classdev_suspend - suspend an led_classdev.
@@ -127,18 +130,11 @@ static int led_resume(struct device *dev)
  */
 int led_classdev_register(struct device *parent, struct led_classdev *led_cdev)
 {
-	int rc;
-
 	led_cdev->dev = device_create(leds_class, parent, 0, led_cdev,
 				      "%s", led_cdev->name);
 	if (IS_ERR(led_cdev->dev))
 		return PTR_ERR(led_cdev->dev);
 
-	/* register the attributes */
-	rc = device_create_file(led_cdev->dev, &dev_attr_brightness);
-	if (rc)
-		goto err_out;
-
 #ifdef CONFIG_LEDS_TRIGGERS
 	init_rwsem(&led_cdev->trigger_lock);
 #endif
@@ -150,36 +146,18 @@ int led_classdev_register(struct device *parent, struct led_classdev *led_cdev)
 	if (!led_cdev->max_brightness)
 		led_cdev->max_brightness = LED_FULL;
 
-	rc = device_create_file(led_cdev->dev, &dev_attr_max_brightness);
-	if (rc)
-		goto err_out_attr_max;
-
 	led_update_brightness(led_cdev);
 
 #ifdef CONFIG_LEDS_TRIGGERS
-	rc = device_create_file(led_cdev->dev, &dev_attr_trigger);
-	if (rc)
-		goto err_out_led_list;
-
 	led_trigger_set_default(led_cdev);
 #endif
 
-	printk(KERN_INFO "Registered led device: %s\n",
+	printk(KERN_DEBUG "Registered led device: %s\n",
 			led_cdev->name);
 
 	return 0;
-
-#ifdef CONFIG_LEDS_TRIGGERS
-err_out_led_list:
-	device_remove_file(led_cdev->dev, &dev_attr_max_brightness);
-#endif
-err_out_attr_max:
-	device_remove_file(led_cdev->dev, &dev_attr_brightness);
-	list_del(&led_cdev->node);
-err_out:
-	device_unregister(led_cdev->dev);
-	return rc;
 }
+
 EXPORT_SYMBOL_GPL(led_classdev_register);
 
 /**
@@ -190,10 +168,7 @@ EXPORT_SYMBOL_GPL(led_classdev_register);
  */
 void led_classdev_unregister(struct led_classdev *led_cdev)
 {
-	device_remove_file(led_cdev->dev, &dev_attr_max_brightness);
-	device_remove_file(led_cdev->dev, &dev_attr_brightness);
 #ifdef CONFIG_LEDS_TRIGGERS
-	device_remove_file(led_cdev->dev, &dev_attr_trigger);
 	down_write(&led_cdev->trigger_lock);
 	if (led_cdev->trigger)
 		led_trigger_set(led_cdev, NULL);
@@ -215,6 +190,7 @@ static int __init leds_init(void)
 		return PTR_ERR(leds_class);
 	leds_class->suspend = led_suspend;
 	leds_class->resume = led_resume;
+	leds_class->dev_attrs = led_class_attrs;
 	return 0;
 }
 
diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c
index e5225d28f392..0823e2622e8c 100644
--- a/drivers/leds/leds-gpio.c
+++ b/drivers/leds/leds-gpio.c
@@ -211,7 +211,6 @@ static int __devinit of_gpio_leds_probe(struct of_device *ofdev,
 					const struct of_device_id *match)
 {
 	struct device_node *np = ofdev->node, *child;
-	struct gpio_led led;
 	struct gpio_led_of_platform_data *pdata;
 	int count = 0, ret;
 
@@ -226,8 +225,8 @@ static int __devinit of_gpio_leds_probe(struct of_device *ofdev,
 	if (!pdata)
 		return -ENOMEM;
 
-	memset(&led, 0, sizeof(led));
 	for_each_child_of_node(np, child) {
+		struct gpio_led led = {};
 		enum of_gpio_flags flags;
 		const char *state;
 
diff --git a/drivers/leds/leds-ss4200.c b/drivers/leds/leds-ss4200.c
index 97f04984c1ca..51477ec71391 100644
--- a/drivers/leds/leds-ss4200.c
+++ b/drivers/leds/leds-ss4200.c
@@ -63,7 +63,7 @@ MODULE_LICENSE("GPL");
 /*
  * PCI ID of the Intel ICH7 LPC Device within which the GPIO block lives.
  */
-static struct pci_device_id ich7_lpc_pci_id[] =
+static const struct pci_device_id ich7_lpc_pci_id[] =
 {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1) },
diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c
index 5738d8bf2d97..921373e4e3af 100644
--- a/drivers/macintosh/therm_pm72.c
+++ b/drivers/macintosh/therm_pm72.c
@@ -948,10 +948,16 @@ static void do_monitor_cpu_combined(void)
 		printk(KERN_WARNING "Warning ! Temperature way above maximum (%d) !\n",
 		       temp_combi >> 16);
 		state0->overtemp += CPU_MAX_OVERTEMP / 4;
-	} else if (temp_combi > (state0->mpu.tmax << 16))
+	} else if (temp_combi > (state0->mpu.tmax << 16)) {
 		state0->overtemp++;
-	else
+		printk(KERN_WARNING "Temperature %d above max %d. overtemp %d\n",
+		       temp_combi >> 16, state0->mpu.tmax, state0->overtemp);
+	} else {
+		if (state0->overtemp)
+			printk(KERN_WARNING "Temperature back down to %d\n",
+			       temp_combi >> 16);
 		state0->overtemp = 0;
+	}
 	if (state0->overtemp >= CPU_MAX_OVERTEMP)
 		critical_state = 1;
 	if (state0->overtemp > 0) {
@@ -1023,10 +1029,16 @@ static void do_monitor_cpu_split(struct cpu_pid_state *state)
 		       " (%d) !\n",
 		       state->index, temp >> 16);
 		state->overtemp += CPU_MAX_OVERTEMP / 4;
-	} else if (temp > (state->mpu.tmax << 16))
+	} else if (temp > (state->mpu.tmax << 16)) {
 		state->overtemp++;
-	else
+		printk(KERN_WARNING "CPU %d temperature %d above max %d. overtemp %d\n",
+		       state->index, temp >> 16, state->mpu.tmax, state->overtemp);
+	} else {
+		if (state->overtemp)
+			printk(KERN_WARNING "CPU %d temperature back down to %d\n",
+			       state->index, temp >> 16);
 		state->overtemp = 0;
+	}
 	if (state->overtemp >= CPU_MAX_OVERTEMP)
 		critical_state = 1;
 	if (state->overtemp > 0) {
@@ -1085,10 +1097,16 @@ static void do_monitor_cpu_rack(struct cpu_pid_state *state)
 		       " (%d) !\n",
 		       state->index, temp >> 16);
 		state->overtemp = CPU_MAX_OVERTEMP / 4;
-	} else if (temp > (state->mpu.tmax << 16))
+	} else if (temp > (state->mpu.tmax << 16)) {
 		state->overtemp++;
-	else
+		printk(KERN_WARNING "CPU %d temperature %d above max %d. overtemp %d\n",
+		       state->index, temp >> 16, state->mpu.tmax, state->overtemp);
+	} else {
+		if (state->overtemp)
+			printk(KERN_WARNING "CPU %d temperature back down to %d\n",
+			       state->index, temp >> 16);
 		state->overtemp = 0;
+	}
 	if (state->overtemp >= CPU_MAX_OVERTEMP)
 		critical_state = 1;
 	if (state->overtemp > 0) {
diff --git a/drivers/macintosh/therm_pm72.h b/drivers/macintosh/therm_pm72.h
index 393cc9df94e1..df3680e2a22f 100644
--- a/drivers/macintosh/therm_pm72.h
+++ b/drivers/macintosh/therm_pm72.h
@@ -269,7 +269,7 @@ struct slots_pid_state
 #define CPU_TEMP_HISTORY_SIZE		2
 #define CPU_POWER_HISTORY_SIZE		10
 #define CPU_PID_INTERVAL		1
-#define CPU_MAX_OVERTEMP		30
+#define CPU_MAX_OVERTEMP		90
 
 #define CPUA_PUMP_RPM_INDEX		7
 #define CPUB_PUMP_RPM_INDEX		8
diff --git a/drivers/macintosh/via-pmu-backlight.c b/drivers/macintosh/via-pmu-backlight.c
index 4f3c4479c16a..1cec02f6c431 100644
--- a/drivers/macintosh/via-pmu-backlight.c
+++ b/drivers/macintosh/via-pmu-backlight.c
@@ -144,6 +144,7 @@ void pmu_backlight_set_sleep(int sleep)
 
 void __init pmu_backlight_init()
 {
+	struct backlight_properties props;
 	struct backlight_device *bd;
 	char name[10];
 	int level, autosave;
@@ -161,13 +162,15 @@ void __init pmu_backlight_init()
 
 	snprintf(name, sizeof(name), "pmubl");
 
-	bd = backlight_device_register(name, NULL, NULL, &pmu_backlight_data);
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.max_brightness = FB_BACKLIGHT_LEVELS - 1;
+	bd = backlight_device_register(name, NULL, NULL, &pmu_backlight_data,
+				       &props);
 	if (IS_ERR(bd)) {
 		printk(KERN_ERR "PMU Backlight registration failed\n");
 		return;
 	}
 	uses_pmu_bl = 1;
-	bd->props.max_brightness = FB_BACKLIGHT_LEVELS - 1;
 	pmu_backlight_init_curve(0x7F, 0x46, 0x0E);
 
 	level = bd->props.max_brightness;
diff --git a/drivers/macintosh/windfarm_core.c b/drivers/macintosh/windfarm_core.c
index 437f55c5d18d..419795f4a2aa 100644
--- a/drivers/macintosh/windfarm_core.c
+++ b/drivers/macintosh/windfarm_core.c
@@ -321,6 +321,7 @@ int wf_register_sensor(struct wf_sensor *new_sr)
 	kref_init(&new_sr->ref);
 	list_add(&new_sr->link, &wf_sensors);
 
+	sysfs_attr_init(&new_sr->attr.attr);
 	new_sr->attr.attr.name = new_sr->name;
 	new_sr->attr.attr.mode = 0444;
 	new_sr->attr.show = wf_show_sensor;
diff --git a/drivers/macintosh/windfarm_smu_controls.c b/drivers/macintosh/windfarm_smu_controls.c
index 6c68b9e5f5c4..43137b421f92 100644
--- a/drivers/macintosh/windfarm_smu_controls.c
+++ b/drivers/macintosh/windfarm_smu_controls.c
@@ -173,6 +173,7 @@ static struct smu_fan_control *smu_fan_create(struct device_node *node,
 
 	fct->fan_type = pwm_fan;
 	fct->ctrl.type = pwm_fan ? WF_CONTROL_PWM_FAN : WF_CONTROL_RPM_FAN;
+	sysfs_attr_init(&fct->ctrl.attr.attr);
 
 	/* We use the name & location here the same way we do for SMU sensors,
 	 * see the comment in windfarm_smu_sensors.c. The locations are a bit
diff --git a/drivers/md/dm-sysfs.c b/drivers/md/dm-sysfs.c
index f91b40942e07..84d2b91e4efb 100644
--- a/drivers/md/dm-sysfs.c
+++ b/drivers/md/dm-sysfs.c
@@ -75,7 +75,7 @@ static struct attribute *dm_attrs[] = {
 	NULL,
 };
 
-static struct sysfs_ops dm_sysfs_ops = {
+static const struct sysfs_ops dm_sysfs_ops = {
 	.show	= dm_attr_show,
 };
 
diff --git a/drivers/md/linear.c b/drivers/md/linear.c
index af2d39d603c7..bb2a23159b21 100644
--- a/drivers/md/linear.c
+++ b/drivers/md/linear.c
@@ -172,12 +172,14 @@ static linear_conf_t *linear_conf(mddev_t *mddev, int raid_disks)
 		disk_stack_limits(mddev->gendisk, rdev->bdev,
 				  rdev->data_offset << 9);
 		/* as we don't honour merge_bvec_fn, we must never risk
-		 * violating it, so limit ->max_sector to one PAGE, as
-		 * a one page request is never in violation.
+		 * violating it, so limit max_segments to 1 lying within
+		 * a single page.
 		 */
-		if (rdev->bdev->bd_disk->queue->merge_bvec_fn &&
-		    queue_max_sectors(mddev->queue) > (PAGE_SIZE>>9))
-			blk_queue_max_hw_sectors(mddev->queue, PAGE_SIZE>>9);
+		if (rdev->bdev->bd_disk->queue->merge_bvec_fn) {
+			blk_queue_max_segments(mddev->queue, 1);
+			blk_queue_segment_boundary(mddev->queue,
+						   PAGE_CACHE_SIZE - 1);
+		}
 
 		conf->array_sectors += rdev->sectors;
 		cnt++;
diff --git a/drivers/md/md.c b/drivers/md/md.c
index a20a71e5efd3..fdc1890b6ac5 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -2642,7 +2642,7 @@ static void rdev_free(struct kobject *ko)
 	mdk_rdev_t *rdev = container_of(ko, mdk_rdev_t, kobj);
 	kfree(rdev);
 }
-static struct sysfs_ops rdev_sysfs_ops = {
+static const struct sysfs_ops rdev_sysfs_ops = {
 	.show		= rdev_attr_show,
 	.store		= rdev_attr_store,
 };
@@ -4059,7 +4059,7 @@ static void md_free(struct kobject *ko)
 	kfree(mddev);
 }
 
-static struct sysfs_ops md_sysfs_ops = {
+static const struct sysfs_ops md_sysfs_ops = {
 	.show	= md_attr_show,
 	.store	= md_attr_store,
 };
diff --git a/drivers/md/multipath.c b/drivers/md/multipath.c
index 4b323f45ad74..5558ebc705c8 100644
--- a/drivers/md/multipath.c
+++ b/drivers/md/multipath.c
@@ -301,14 +301,16 @@ static int multipath_add_disk(mddev_t *mddev, mdk_rdev_t *rdev)
 					  rdev->data_offset << 9);
 
 		/* as we don't honour merge_bvec_fn, we must never risk
-		 * violating it, so limit ->max_sector to one PAGE, as
-		 * a one page request is never in violation.
+		 * violating it, so limit ->max_segments to one, lying
+		 * within a single page.
 		 * (Note: it is very unlikely that a device with
 		 * merge_bvec_fn will be involved in multipath.)
 		 */
-			if (q->merge_bvec_fn &&
-			    queue_max_sectors(q) > (PAGE_SIZE>>9))
-				blk_queue_max_hw_sectors(mddev->queue, PAGE_SIZE>>9);
+			if (q->merge_bvec_fn) {
+				blk_queue_max_segments(mddev->queue, 1);
+				blk_queue_segment_boundary(mddev->queue,
+							   PAGE_CACHE_SIZE - 1);
+			}
 
 			conf->working_disks++;
 			mddev->degraded--;
@@ -476,9 +478,11 @@ static int multipath_run (mddev_t *mddev)
 		/* as we don't honour merge_bvec_fn, we must never risk
 		 * violating it, not that we ever expect a device with
 		 * a merge_bvec_fn to be involved in multipath */
-		if (rdev->bdev->bd_disk->queue->merge_bvec_fn &&
-		    queue_max_sectors(mddev->queue) > (PAGE_SIZE>>9))
-			blk_queue_max_hw_sectors(mddev->queue, PAGE_SIZE>>9);
+		if (rdev->bdev->bd_disk->queue->merge_bvec_fn) {
+			blk_queue_max_segments(mddev->queue, 1);
+			blk_queue_segment_boundary(mddev->queue,
+						   PAGE_CACHE_SIZE - 1);
+		}
 
 		if (!test_bit(Faulty, &rdev->flags))
 			conf->working_disks++;
diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c
index a1f7147b757f..377cf2a3c333 100644
--- a/drivers/md/raid0.c
+++ b/drivers/md/raid0.c
@@ -176,14 +176,15 @@ static int create_strip_zones(mddev_t *mddev)
 		disk_stack_limits(mddev->gendisk, rdev1->bdev,
 				  rdev1->data_offset << 9);
 		/* as we don't honour merge_bvec_fn, we must never risk
-		 * violating it, so limit ->max_sector to one PAGE, as
-		 * a one page request is never in violation.
+		 * violating it, so limit ->max_segments to 1, lying within
+		 * a single page.
 		 */
 
-		if (rdev1->bdev->bd_disk->queue->merge_bvec_fn &&
-		    queue_max_sectors(mddev->queue) > (PAGE_SIZE>>9))
-			blk_queue_max_hw_sectors(mddev->queue, PAGE_SIZE>>9);
-
+		if (rdev1->bdev->bd_disk->queue->merge_bvec_fn) {
+			blk_queue_max_segments(mddev->queue, 1);
+			blk_queue_segment_boundary(mddev->queue,
+						   PAGE_CACHE_SIZE - 1);
+		}
 		if (!smallest || (rdev1->sectors < smallest->sectors))
 			smallest = rdev1;
 		cnt++;
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 5a06122abd3b..f741f77eeb2b 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -1152,13 +1152,17 @@ static int raid1_add_disk(mddev_t *mddev, mdk_rdev_t *rdev)
 
 			disk_stack_limits(mddev->gendisk, rdev->bdev,
 					  rdev->data_offset << 9);
-			/* as we don't honour merge_bvec_fn, we must never risk
-			 * violating it, so limit ->max_sector to one PAGE, as
-			 * a one page request is never in violation.
+			/* as we don't honour merge_bvec_fn, we must
+			 * never risk violating it, so limit
+			 * ->max_segments to one lying with a single
+			 * page, as a one page request is never in
+			 * violation.
 			 */
-			if (rdev->bdev->bd_disk->queue->merge_bvec_fn &&
-			    queue_max_sectors(mddev->queue) > (PAGE_SIZE>>9))
-				blk_queue_max_hw_sectors(mddev->queue, PAGE_SIZE>>9);
+			if (rdev->bdev->bd_disk->queue->merge_bvec_fn) {
+				blk_queue_max_segments(mddev->queue, 1);
+				blk_queue_segment_boundary(mddev->queue,
+							   PAGE_CACHE_SIZE - 1);
+			}
 
 			p->head_position = 0;
 			rdev->raid_disk = mirror;
@@ -2098,12 +2102,14 @@ static int run(mddev_t *mddev)
 		disk_stack_limits(mddev->gendisk, rdev->bdev,
 				  rdev->data_offset << 9);
 		/* as we don't honour merge_bvec_fn, we must never risk
-		 * violating it, so limit ->max_sector to one PAGE, as
-		 * a one page request is never in violation.
+		 * violating it, so limit ->max_segments to 1 lying within
+		 * a single page, as a one page request is never in violation.
 		 */
-		if (rdev->bdev->bd_disk->queue->merge_bvec_fn &&
-		    queue_max_sectors(mddev->queue) > (PAGE_SIZE>>9))
-			blk_queue_max_hw_sectors(mddev->queue, PAGE_SIZE>>9);
+		if (rdev->bdev->bd_disk->queue->merge_bvec_fn) {
+			blk_queue_max_segments(mddev->queue, 1);
+			blk_queue_segment_boundary(mddev->queue,
+						   PAGE_CACHE_SIZE - 1);
+		}
 	}
 
 	mddev->degraded = 0;
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 7584f9ab9bcf..b4ba41ecbd20 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -1155,13 +1155,17 @@ static int raid10_add_disk(mddev_t *mddev, mdk_rdev_t *rdev)
 
 			disk_stack_limits(mddev->gendisk, rdev->bdev,
 					  rdev->data_offset << 9);
-			/* as we don't honour merge_bvec_fn, we must never risk
-			 * violating it, so limit ->max_sector to one PAGE, as
-			 * a one page request is never in violation.
+			/* as we don't honour merge_bvec_fn, we must
+			 * never risk violating it, so limit
+			 * ->max_segments to one lying with a single
+			 * page, as a one page request is never in
+			 * violation.
 			 */
-			if (rdev->bdev->bd_disk->queue->merge_bvec_fn &&
-			    queue_max_sectors(mddev->queue) > (PAGE_SIZE>>9))
-				blk_queue_max_hw_sectors(mddev->queue, PAGE_SIZE>>9);
+			if (rdev->bdev->bd_disk->queue->merge_bvec_fn) {
+				blk_queue_max_segments(mddev->queue, 1);
+				blk_queue_segment_boundary(mddev->queue,
+							   PAGE_CACHE_SIZE - 1);
+			}
 
 			p->head_position = 0;
 			rdev->raid_disk = mirror;
@@ -2255,12 +2259,14 @@ static int run(mddev_t *mddev)
 		disk_stack_limits(mddev->gendisk, rdev->bdev,
 				  rdev->data_offset << 9);
 		/* as we don't honour merge_bvec_fn, we must never risk
-		 * violating it, so limit ->max_sector to one PAGE, as
-		 * a one page request is never in violation.
+		 * violating it, so limit max_segments to 1 lying
+		 * within a single page.
 		 */
-		if (rdev->bdev->bd_disk->queue->merge_bvec_fn &&
-		    queue_max_sectors(mddev->queue) > (PAGE_SIZE>>9))
-			blk_queue_max_hw_sectors(mddev->queue, PAGE_SIZE>>9);
+		if (rdev->bdev->bd_disk->queue->merge_bvec_fn) {
+			blk_queue_max_segments(mddev->queue, 1);
+			blk_queue_segment_boundary(mddev->queue,
+						   PAGE_CACHE_SIZE - 1);
+		}
 
 		disk->head_position = 0;
 	}
diff --git a/drivers/media/IR/ir-keytable.c b/drivers/media/IR/ir-keytable.c
index 0903f539bf68..0a3b4ed38e48 100644
--- a/drivers/media/IR/ir-keytable.c
+++ b/drivers/media/IR/ir-keytable.c
@@ -123,7 +123,7 @@ static int ir_copy_table(struct ir_scancode_table *destin,
  * If the key is not found, returns -EINVAL, otherwise, returns 0.
  */
 static int ir_getkeycode(struct input_dev *dev,
-			 int scancode, int *keycode)
+			 unsigned int scancode, unsigned int *keycode)
 {
 	int elem;
 	struct ir_input_dev *ir_dev = input_get_drvdata(dev);
@@ -291,7 +291,7 @@ static int ir_insert_key(struct ir_scancode_table *rc_tab,
  * If the key is not found, returns -EINVAL, otherwise, returns 0.
  */
 static int ir_setkeycode(struct input_dev *dev,
-			 int scancode, int keycode)
+			 unsigned int scancode, unsigned int keycode)
 {
 	int rc = 0;
 	struct ir_input_dev *ir_dev = input_get_drvdata(dev);
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.h b/drivers/media/dvb/dvb-core/dvb_frontend.h
index 52e4ce4304ee..80dda308ff74 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.h
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.h
@@ -214,14 +214,14 @@ struct dvb_tuner_ops {
 	int (*get_status)(struct dvb_frontend *fe, u32 *status);
 	int (*get_rf_strength)(struct dvb_frontend *fe, u16 *strength);
 
-	/** These are provided seperately from set_params in order to facilitate silicon
-	 * tuners which require sophisticated tuning loops, controlling each parameter seperately. */
+	/** These are provided separately from set_params in order to facilitate silicon
+	 * tuners which require sophisticated tuning loops, controlling each parameter separately. */
 	int (*set_frequency)(struct dvb_frontend *fe, u32 frequency);
 	int (*set_bandwidth)(struct dvb_frontend *fe, u32 bandwidth);
 
 	/*
-	 * These are provided seperately from set_params in order to facilitate silicon
-	 * tuners which require sophisticated tuning loops, controlling each parameter seperately.
+	 * These are provided separately from set_params in order to facilitate silicon
+	 * tuners which require sophisticated tuning loops, controlling each parameter separately.
 	 */
 	int (*set_state)(struct dvb_frontend *fe, enum tuner_param param, struct tuner_state *state);
 	int (*get_state)(struct dvb_frontend *fe, enum tuner_param param, struct tuner_state *state);
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
index a03ef7efec9a..852fe89539cf 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
@@ -9,7 +9,7 @@
 #include <linux/usb/input.h>
 
 static int dvb_usb_getkeycode(struct input_dev *dev,
-				    int scancode, int *keycode)
+				unsigned int scancode, unsigned int *keycode)
 {
 	struct dvb_usb_device *d = input_get_drvdata(dev);
 
@@ -39,7 +39,7 @@ static int dvb_usb_getkeycode(struct input_dev *dev,
 }
 
 static int dvb_usb_setkeycode(struct input_dev *dev,
-				    int scancode, int keycode)
+				unsigned int scancode, unsigned int keycode)
 {
 	struct dvb_usb_device *d = input_get_drvdata(dev);
 
diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c
index 12279f6d9bc4..716870ae85d5 100644
--- a/drivers/media/video/bt8xx/bttv-cards.c
+++ b/drivers/media/video/bt8xx/bttv-cards.c
@@ -4404,7 +4404,7 @@ static void rv605_muxsel(struct bttv *btv, unsigned int input)
 /* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning]
  *
  * The CS16 (available on eBay cheap) is a PCI board with four Fusion
- * 878A chips, a PCI bridge, an Atmel microcontroller, four sync seperator
+ * 878A chips, a PCI bridge, an Atmel microcontroller, four sync separator
  * chips, ten eight input analog multiplexors, a not chip and a few
  * other components.
  *
@@ -4426,7 +4426,7 @@ static void rv605_muxsel(struct bttv *btv, unsigned int input)
  *
  * There is an ATMEL microcontroller with an 8031 core on board.  I have not
  * determined what function (if any) it provides.  With the microcontroller
- * and sync seperator chips a guess is that it might have to do with video
+ * and sync separator chips a guess is that it might have to do with video
  * switching and maybe some digital I/O.
  */
 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input)
diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c
index bc4ced6c013b..f36e11a0458d 100644
--- a/drivers/media/video/gspca/ov519.c
+++ b/drivers/media/video/gspca/ov519.c
@@ -512,7 +512,7 @@ static const struct v4l2_pix_format ovfx2_ov3610_mode[] = {
 /*
  * The FX2 chip does not give us a zero length read at end of frame.
  * It does, however, give a short read at the end of a frame, if
- * neccessary, rather than run two frames together.
+ * necessary, rather than run two frames together.
  *
  * By choosing the right bulk transfer size, we are guaranteed to always
  * get a short read for the last read of each frame.  Frame sizes are
diff --git a/drivers/media/video/omap24xxcam.c b/drivers/media/video/omap24xxcam.c
index 7400eacb4d64..142c327afb32 100644
--- a/drivers/media/video/omap24xxcam.c
+++ b/drivers/media/video/omap24xxcam.c
@@ -1735,7 +1735,7 @@ static struct v4l2_int_device omap24xxcam = {
  *
  */
 
-static int __init omap24xxcam_probe(struct platform_device *pdev)
+static int __devinit omap24xxcam_probe(struct platform_device *pdev)
 {
 	struct omap24xxcam_device *cam;
 	struct resource *mem;
diff --git a/drivers/media/video/pwc/philips.txt b/drivers/media/video/pwc/philips.txt
index f9f3584281d8..d38dd791511e 100644
--- a/drivers/media/video/pwc/philips.txt
+++ b/drivers/media/video/pwc/philips.txt
@@ -33,7 +33,7 @@ a lot of extra information, a FAQ, and the binary plugin 'PWCX'. This plugin
 contains decompression routines that allow you to use higher image sizes and
 framerates; in addition the webcam uses less bandwidth on the USB bus (handy
 if you want to run more than 1 camera simultaneously). These routines fall
-under a NDA, and may therefor not be distributed as source; however, its use
+under a NDA, and may therefore not be distributed as source; however, its use
 is completely optional.
 
 You can build this code either into your kernel, or as a module. I recommend
diff --git a/drivers/media/video/sn9c102/sn9c102_sensor.h b/drivers/media/video/sn9c102/sn9c102_sensor.h
index 4af7382da5c5..494957b10bac 100644
--- a/drivers/media/video/sn9c102/sn9c102_sensor.h
+++ b/drivers/media/video/sn9c102/sn9c102_sensor.h
@@ -120,7 +120,7 @@ extern int sn9c102_write_regs(struct sn9c102_device*, const u8 valreg[][2],
 /*
    Write multiple registers with constant values. For example:
    sn9c102_write_const_regs(cam, {0x00, 0x14}, {0x60, 0x17}, {0x0f, 0x18});
-   Register adresses must be < 256.
+   Register addresses must be < 256.
 */
 #define sn9c102_write_const_regs(sn9c102_device, data...)                     \
 	({ static const u8 _valreg[][2] = {data};                             \
diff --git a/drivers/media/video/tea6420.c b/drivers/media/video/tea6420.c
index 0446524d3543..6bf6bc7dbc7f 100644
--- a/drivers/media/video/tea6420.c
+++ b/drivers/media/video/tea6420.c
@@ -6,7 +6,7 @@
 
     The tea6420 is a bus controlled audio-matrix with 5 stereo inputs,
     4 stereo outputs and gain control for each output.
-    It is cascadable, i.e. it can be found at the adresses 0x98
+    It is cascadable, i.e. it can be found at the addresses 0x98
     and 0x9a on the i2c-bus.
 
     For detailed informations download the specifications directly
diff --git a/drivers/message/i2o/iop.c b/drivers/message/i2o/iop.c
index e5ab62141503..ef5ce2676f05 100644
--- a/drivers/message/i2o/iop.c
+++ b/drivers/message/i2o/iop.c
@@ -539,7 +539,7 @@ static int i2o_iop_reset(struct i2o_controller *c)
 		 * which is indeterminate. We need to wait until the IOP has
 		 * rebooted before we can let the system talk to it. We read
 		 * the inbound Free_List until a message is available. If we
-		 * can't read one in the given ammount of time, we assume the
+		 * can't read one in the given amount of time, we assume the
 		 * IOP could not reboot properly.
 		 */
 		osm_debug("%s: Reset in progress, waiting for reboot...\n",
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 951fa9b93fbe..2a5a0b78f84e 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -11,7 +11,7 @@ config MFD_CORE
 
 config MFD_88PM860X
 	bool "Support Marvell 88PM8606/88PM8607"
-	depends on I2C=y
+	depends on I2C=y && GENERIC_HARDIRQS
 	select MFD_CORE
 	help
 	  This supports for Marvell 88PM8606/88PM8607 Power Management IC.
@@ -205,7 +205,7 @@ config PMIC_ADP5520
 
 config MFD_MAX8925
 	bool "Maxim Semiconductor MAX8925 PMIC Support"
-	depends on I2C=y
+	depends on I2C=y && GENERIC_HARDIRQS
 	select MFD_CORE
 	help
 	  Say yes here to support for Maxim Semiconductor MAX8925. This is
@@ -226,7 +226,7 @@ config MFD_WM8400
 config MFD_WM831X
 	bool "Support Wolfson Microelectronics WM831x/2x PMICs"
 	select MFD_CORE
-	depends on I2C=y
+	depends on I2C=y && GENERIC_HARDIRQS
 	help
 	  Support for the Wolfson Microelecronics WM831x and WM832x PMICs.
 	  This driver provides common support for accessing the device,
@@ -235,6 +235,7 @@ config MFD_WM831X
 
 config MFD_WM8350
 	bool
+	depends on GENERIC_HARDIRQS
 
 config MFD_WM8350_CONFIG_MODE_0
 	bool
@@ -287,7 +288,7 @@ config MFD_WM8352_CONFIG_MODE_3
 config MFD_WM8350_I2C
 	bool "Support Wolfson Microelectronics WM8350 with I2C"
 	select MFD_WM8350
-	depends on I2C=y
+	depends on I2C=y && GENERIC_HARDIRQS
 	help
 	  The WM8350 is an integrated audio and power management
 	  subsystem with watchdog and RTC functionality for embedded
diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
index dc9ea95c0561..7b6652f60117 100644
--- a/drivers/mfd/sm501.c
+++ b/drivers/mfd/sm501.c
@@ -523,7 +523,7 @@ unsigned long sm501_set_clock(struct device *dev,
 	unsigned long clock = readl(sm->regs + SM501_CURRENT_CLOCK);
 	unsigned char reg;
 	unsigned int pll_reg = 0;
-	unsigned long sm501_freq; /* the actual frequency acheived */
+	unsigned long sm501_freq; /* the actual frequency achieved */
 
 	struct sm501_clock to;
 
@@ -533,7 +533,7 @@ unsigned long sm501_set_clock(struct device *dev,
 
 	switch (clksrc) {
 	case SM501_CLOCK_P2XCLK:
-		/* This clock is divided in half so to achive the
+		/* This clock is divided in half so to achieve the
 		 * requested frequency the value must be multiplied by
 		 * 2. This clock also has an additional pre divisor */
 
@@ -562,7 +562,7 @@ unsigned long sm501_set_clock(struct device *dev,
 		break;
 
 	case SM501_CLOCK_V2XCLK:
-		/* This clock is divided in half so to achive the
+		/* This clock is divided in half so to achieve the
 		 * requested frequency the value must be multiplied by 2. */
 
 		sm501_freq = (sm501_select_clock(2 * req_freq, &to, 3) / 2);
@@ -648,7 +648,7 @@ unsigned long sm501_find_clock(struct device *dev,
 			       unsigned long req_freq)
 {
 	struct sm501_devdata *sm = dev_get_drvdata(dev);
-	unsigned long sm501_freq; /* the frequency achiveable by the 501 */
+	unsigned long sm501_freq; /* the frequency achieveable by the 501 */
 	struct sm501_clock to;
 
 	switch (clksrc) {
@@ -1430,7 +1430,7 @@ static int __devinit sm501_plat_probe(struct platform_device *dev)
 	}
 
 	sm->regs_claim = request_mem_region(sm->io_res->start,
-					    resource_size(sm->io_res), "sm501");
+					    0x100, "sm501");
 
 	if (sm->regs_claim == NULL) {
 		dev_err(&dev->dev, "cannot claim registers\n");
@@ -1644,7 +1644,7 @@ static int __devinit sm501_pci_probe(struct pci_dev *dev,
 	sm->mem_res = &dev->resource[0];
 
 	sm->regs_claim = request_mem_region(sm->io_res->start,
-					    resource_size(sm->io_res), "sm501");
+					    0x100, "sm501");
 	if (sm->regs_claim == NULL) {
 		dev_err(&dev->dev, "cannot claim registers\n");
 		err= -EBUSY;
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index d16af6a423fb..2191c8d896a0 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -268,6 +268,16 @@ config ISL29003
 	  This driver can also be built as a module.  If so, the module
 	  will be called isl29003.
 
+config SENSORS_TSL2550
+	tristate "Taos TSL2550 ambient light sensor"
+	depends on I2C && SYSFS
+	help
+	  If you say yes here you get support for the Taos TSL2550
+	  ambient light sensor.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called tsl2550.
+
 config EP93XX_PWM
 	tristate "EP93xx PWM support"
 	depends on ARCH_EP93XX
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 049ff2482f30..27c484355414 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_SGI_GRU)		+= sgi-gru/
 obj-$(CONFIG_CS5535_MFGPT)	+= cs5535-mfgpt.o
 obj-$(CONFIG_HP_ILO)		+= hpilo.o
 obj-$(CONFIG_ISL29003)		+= isl29003.o
+obj-$(CONFIG_SENSORS_TSL2550)	+= tsl2550.o
 obj-$(CONFIG_EP93XX_PWM)	+= ep93xx_pwm.o
 obj-$(CONFIG_DS1682)		+= ds1682.o
 obj-$(CONFIG_TI_DAC7512)	+= ti_dac7512.o
diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index 2cb2736d65aa..db7d0f21b65d 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -505,6 +505,7 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	 * Export the EEPROM bytes through sysfs, since that's convenient.
 	 * By default, only root should see the data (maybe passwords etc)
 	 */
+	sysfs_bin_attr_init(&at24->bin);
 	at24->bin.attr.name = "eeprom";
 	at24->bin.attr.mode = chip.flags & AT24_FLAG_IRUGO ? S_IRUGO : S_IRUSR;
 	at24->bin.read = at24_bin_read;
diff --git a/drivers/misc/eeprom/at25.c b/drivers/misc/eeprom/at25.c
index d902d81dde39..d194212a41f6 100644
--- a/drivers/misc/eeprom/at25.c
+++ b/drivers/misc/eeprom/at25.c
@@ -347,6 +347,7 @@ static int at25_probe(struct spi_device *spi)
 	 * that's sensitive for read and/or write, like ethernet addresses,
 	 * security codes, board-specific manufacturing calibrations, etc.
 	 */
+	sysfs_bin_attr_init(&at25->bin);
 	at25->bin.attr.name = "eeprom";
 	at25->bin.attr.mode = S_IRUSR;
 	at25->bin.read = at25_bin_read;
diff --git a/drivers/misc/phantom.c b/drivers/misc/phantom.c
index 04c27266f567..779aa8ebe4cf 100644
--- a/drivers/misc/phantom.c
+++ b/drivers/misc/phantom.c
@@ -497,12 +497,7 @@ static struct pci_driver phantom_pci_driver = {
 	.resume = phantom_resume
 };
 
-static ssize_t phantom_show_version(struct class *cls, char *buf)
-{
-	return sprintf(buf, PHANTOM_VERSION "\n");
-}
-
-static CLASS_ATTR(version, 0444, phantom_show_version, NULL);
+static CLASS_ATTR_STRING(version, 0444, PHANTOM_VERSION);
 
 static int __init phantom_init(void)
 {
@@ -515,7 +510,7 @@ static int __init phantom_init(void)
 		printk(KERN_ERR "phantom: can't register phantom class\n");
 		goto err;
 	}
-	retval = class_create_file(phantom_class, &class_attr_version);
+	retval = class_create_file(phantom_class, &class_attr_version.attr);
 	if (retval) {
 		printk(KERN_ERR "phantom: can't create sysfs version file\n");
 		goto err_class;
@@ -541,7 +536,7 @@ static int __init phantom_init(void)
 err_unchr:
 	unregister_chrdev_region(dev, PHANTOM_MAX_MINORS);
 err_attr:
-	class_remove_file(phantom_class, &class_attr_version);
+	class_remove_file(phantom_class, &class_attr_version.attr);
 err_class:
 	class_destroy(phantom_class);
 err:
@@ -554,7 +549,7 @@ static void __exit phantom_exit(void)
 
 	unregister_chrdev_region(MKDEV(phantom_major, 0), PHANTOM_MAX_MINORS);
 
-	class_remove_file(phantom_class, &class_attr_version);
+	class_remove_file(phantom_class, &class_attr_version.attr);
 	class_destroy(phantom_class);
 
 	pr_debug("phantom: module successfully removed\n");
diff --git a/drivers/misc/sgi-gru/grutables.h b/drivers/misc/sgi-gru/grutables.h
index 02a77b8b8eef..7a8b9068ea03 100644
--- a/drivers/misc/sgi-gru/grutables.h
+++ b/drivers/misc/sgi-gru/grutables.h
@@ -516,8 +516,7 @@ struct gru_blade_state {
 
 /* Scan all active GRUs in a GRU bitmap */
 #define for_each_gru_in_bitmap(gid, map)				\
-	for ((gid) = find_first_bit((map), GRU_MAX_GRUS); (gid) < GRU_MAX_GRUS;\
-		(gid)++, (gid) = find_next_bit((map), GRU_MAX_GRUS, (gid)))
+	for_each_set_bit((gid), (map), GRU_MAX_GRUS)
 
 /* Scan all active GRUs on a specific blade */
 #define for_each_gru_on_blade(gru, nid, i)				\
@@ -536,23 +535,17 @@ struct gru_blade_state {
 
 /* Scan each CBR whose bit is set in a TFM (or copy of) */
 #define for_each_cbr_in_tfm(i, map)					\
-	for ((i) = find_first_bit(map, GRU_NUM_CBE);			\
-			(i) < GRU_NUM_CBE;				\
-			(i)++, (i) = find_next_bit(map, GRU_NUM_CBE, i))
+	for_each_set_bit((i), (map), GRU_NUM_CBE)
 
 /* Scan each CBR in a CBR bitmap. Note: multiple CBRs in an allocation unit */
 #define for_each_cbr_in_allocation_map(i, map, k)			\
-	for ((k) = find_first_bit(map, GRU_CBR_AU); (k) < GRU_CBR_AU;	\
-			(k) = find_next_bit(map, GRU_CBR_AU, (k) + 1)) 	\
+	for_each_set_bit((k), (map), GRU_CBR_AU)			\
 		for ((i) = (k)*GRU_CBR_AU_SIZE;				\
 				(i) < ((k) + 1) * GRU_CBR_AU_SIZE; (i)++)
 
 /* Scan each DSR in a DSR bitmap. Note: multiple DSRs in an allocation unit */
 #define for_each_dsr_in_allocation_map(i, map, k)			\
-	for ((k) = find_first_bit((const unsigned long *)map, GRU_DSR_AU);\
-			(k) < GRU_DSR_AU;				\
-			(k) = find_next_bit((const unsigned long *)map,	\
-					  GRU_DSR_AU, (k) + 1))		\
+	for_each_set_bit((k), (const unsigned long *)(map), GRU_DSR_AU)	\
 		for ((i) = (k) * GRU_DSR_AU_CL;				\
 				(i) < ((k) + 1) * GRU_DSR_AU_CL; (i)++)
 
diff --git a/drivers/i2c/chips/tsl2550.c b/drivers/misc/tsl2550.c
index a0702f36a72f..483ae5f7f68e 100644
--- a/drivers/i2c/chips/tsl2550.c
+++ b/drivers/misc/tsl2550.c
@@ -47,8 +47,8 @@ struct tsl2550_data {
 	struct i2c_client *client;
 	struct mutex update_lock;
 
-	unsigned int power_state : 1;
-	unsigned int operating_mode : 1;
+	unsigned int power_state:1;
+	unsigned int operating_mode:1;
 };
 
 /*
diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/card/sdio_uart.c
index 3fab78ba8952..723e50894db9 100644
--- a/drivers/mmc/card/sdio_uart.c
+++ b/drivers/mmc/card/sdio_uart.c
@@ -575,7 +575,7 @@ static int uart_carrier_raised(struct tty_port *tport)
 	struct sdio_uart_port *port =
 			container_of(tport, struct sdio_uart_port, port);
 	unsigned int ret = sdio_uart_claim_func(port);
-	if (ret)	/* Missing hardware shoudn't block for carrier */
+	if (ret)	/* Missing hardware shouldn't block for carrier */
 		return 1;
 	ret = sdio_uart_get_mctrl(port);
 	sdio_uart_release_func(port);
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index f4b97d3c3d0f..3168ebd616b2 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -1089,6 +1089,7 @@ void mmc_rescan(struct work_struct *work)
 	mmc_claim_host(host);
 
 	mmc_power_up(host);
+	sdio_reset(host);
 	mmc_go_idle(host);
 
 	mmc_send_if_cond(host, host->ocr_avail);
diff --git a/drivers/mmc/core/sdio_ops.c b/drivers/mmc/core/sdio_ops.c
index 4eb7825fd1a7..dea36d9c22e6 100644
--- a/drivers/mmc/core/sdio_ops.c
+++ b/drivers/mmc/core/sdio_ops.c
@@ -67,13 +67,13 @@ int mmc_send_io_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
 	return err;
 }
 
-int mmc_io_rw_direct(struct mmc_card *card, int write, unsigned fn,
-	unsigned addr, u8 in, u8* out)
+static int mmc_io_rw_direct_host(struct mmc_host *host, int write, unsigned fn,
+	unsigned addr, u8 in, u8 *out)
 {
 	struct mmc_command cmd;
 	int err;
 
-	BUG_ON(!card);
+	BUG_ON(!host);
 	BUG_ON(fn > 7);
 
 	/* sanity check */
@@ -90,11 +90,11 @@ int mmc_io_rw_direct(struct mmc_card *card, int write, unsigned fn,
 	cmd.arg |= in;
 	cmd.flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_AC;
 
-	err = mmc_wait_for_cmd(card->host, &cmd, 0);
+	err = mmc_wait_for_cmd(host, &cmd, 0);
 	if (err)
 		return err;
 
-	if (mmc_host_is_spi(card->host)) {
+	if (mmc_host_is_spi(host)) {
 		/* host driver already reported errors */
 	} else {
 		if (cmd.resp[0] & R5_ERROR)
@@ -106,7 +106,7 @@ int mmc_io_rw_direct(struct mmc_card *card, int write, unsigned fn,
 	}
 
 	if (out) {
-		if (mmc_host_is_spi(card->host))
+		if (mmc_host_is_spi(host))
 			*out = (cmd.resp[0] >> 8) & 0xFF;
 		else
 			*out = cmd.resp[0] & 0xFF;
@@ -115,6 +115,13 @@ int mmc_io_rw_direct(struct mmc_card *card, int write, unsigned fn,
 	return 0;
 }
 
+int mmc_io_rw_direct(struct mmc_card *card, int write, unsigned fn,
+	unsigned addr, u8 in, u8 *out)
+{
+	BUG_ON(!card);
+	return mmc_io_rw_direct_host(card->host, write, fn, addr, in, out);
+}
+
 int mmc_io_rw_extended(struct mmc_card *card, int write, unsigned fn,
 	unsigned addr, int incr_addr, u8 *buf, unsigned blocks, unsigned blksz)
 {
@@ -182,3 +189,20 @@ int mmc_io_rw_extended(struct mmc_card *card, int write, unsigned fn,
 	return 0;
 }
 
+int sdio_reset(struct mmc_host *host)
+{
+	int ret;
+	u8 abort;
+
+	/* SDIO Simplified Specification V2.0, 4.4 Reset for SDIO */
+
+	ret = mmc_io_rw_direct_host(host, 0, 0, SDIO_CCCR_ABORT, 0, &abort);
+	if (ret)
+		abort = 0x08;
+	else
+		abort |= 0x08;
+
+	ret = mmc_io_rw_direct_host(host, 1, 0, SDIO_CCCR_ABORT, abort, NULL);
+	return ret;
+}
+
diff --git a/drivers/mmc/core/sdio_ops.h b/drivers/mmc/core/sdio_ops.h
index e2e74b0d17d8..12a4d3ab174c 100644
--- a/drivers/mmc/core/sdio_ops.h
+++ b/drivers/mmc/core/sdio_ops.h
@@ -17,6 +17,7 @@ int mmc_io_rw_direct(struct mmc_card *card, int write, unsigned fn,
 	unsigned addr, u8 in, u8* out);
 int mmc_io_rw_extended(struct mmc_card *card, int write, unsigned fn,
 	unsigned addr, int incr_addr, u8 *buf, unsigned blocks, unsigned blksz);
+int sdio_reset(struct mmc_host *host);
 
 #endif
 
diff --git a/drivers/mmc/host/msm_sdcc.c b/drivers/mmc/host/msm_sdcc.c
index b31946e0b4ca..4c068e5fe6b2 100644
--- a/drivers/mmc/host/msm_sdcc.c
+++ b/drivers/mmc/host/msm_sdcc.c
@@ -1250,9 +1250,7 @@ msmsdcc_resume(struct platform_device *dev)
 
 		if (mmc->card && mmc->card->type != MMC_TYPE_SDIO)
 			mmc_resume_host(mmc);
-			if (host->stat_irq)
-				enable_irq(host->stat_irq);
-		else if (host->stat_irq)
+		if (host->stat_irq)
 			enable_irq(host->stat_irq);
 	}
 	return 0;
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index 60a2b69e54f5..2df90412abb5 100644
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -4,7 +4,7 @@
  *  This is a driver for the SDHC controller found in Freescale MX2/MX3
  *  SoCs. It is basically the same hardware as found on MX1 (imxmmc.c).
  *  Unlike the hardware found on MX1, this hardware just works and does
- *  not need all the quirks found in imxmmc.c, hence the seperate driver.
+ *  not need all the quirks found in imxmmc.c, hence the separate driver.
  *
  *  Copyright (C) 2008 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
  *  Copyright (C) 2006 Pavel Pisa, PiKRON <ppisa@pikron.com>
@@ -708,7 +708,7 @@ static int mxcmci_probe(struct platform_device *pdev)
 	mmc->max_blk_size = 2048;
 	mmc->max_blk_count = 65535;
 	mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
-	mmc->max_seg_size = mmc->max_seg_size;
+	mmc->max_seg_size = mmc->max_req_size;
 
 	host = mmc_priv(mmc);
 	host->base = ioremap(r->start, resource_size(r));
diff --git a/drivers/mtd/chips/cfi_util.c b/drivers/mtd/chips/cfi_util.c
index ca584d0380b4..ca584d0380b4 100755..100644
--- a/drivers/mtd/chips/cfi_util.c
+++ b/drivers/mtd/chips/cfi_util.c
diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c
index 1bec5e1ce6ac..8db1148dfa47 100644
--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -226,7 +226,7 @@ struct unlock_addr {
  * exists, but is for MTD_UADDR_NOT_SUPPORTED - and, therefore,
  * should not be used.  The  problem is that structures with
  * initializers have extra fields initialized to 0.  It is _very_
- * desireable to have the unlock address entries for unsupported
+ * desirable to have the unlock address entries for unsupported
  * data widths automatically initialized - that means that
  * MTD_UADDR_NOT_SUPPORTED must be 0 and the first entry here
  * must go unused.
diff --git a/drivers/mtd/inftlcore.c b/drivers/mtd/inftlcore.c
index 8aca5523a337..8aca5523a337 100755..100644
--- a/drivers/mtd/inftlcore.c
+++ b/drivers/mtd/inftlcore.c
diff --git a/drivers/mtd/maps/omap_nor.c b/drivers/mtd/maps/omap_nor.c
deleted file mode 100644
index e69de29bb2d1..000000000000
--- a/drivers/mtd/maps/omap_nor.c
+++ /dev/null
diff --git a/drivers/mtd/maps/pismo.c b/drivers/mtd/maps/pismo.c
index c48cad271f5d..30e12c88d1da 100644
--- a/drivers/mtd/maps/pismo.c
+++ b/drivers/mtd/maps/pismo.c
@@ -118,7 +118,7 @@ static int __devinit pismo_add_device(struct pismo_data *pismo, int i,
 {
 	struct platform_device *dev;
 	struct resource res = { };
-	phys_addr_t base = region.base;
+	phys_addr_t base = region->base;
 	int ret;
 
 	if (base == ~0)
diff --git a/drivers/mtd/maps/plat-ram.c b/drivers/mtd/maps/plat-ram.c
index dafb91944e70..76a76be5a7bd 100644
--- a/drivers/mtd/maps/plat-ram.c
+++ b/drivers/mtd/maps/plat-ram.c
@@ -4,7 +4,7 @@
  *	http://www.simtec.co.uk/products/SWLINUX/
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * Generic platfrom device based RAM map
+ * Generic platform device based RAM map
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index bb6465604235..42e5ea49e975 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -444,7 +444,7 @@ config MTD_NAND_FSL_UPM
 
 config MTD_NAND_MXC
 	tristate "MXC NAND support"
-	depends on ARCH_MX2 || ARCH_MX3
+	depends on ARCH_MX2 || ARCH_MX25 || ARCH_MX3
 	help
 	  This enables the driver for the NAND flash controller on the
 	  MXC processors.
@@ -457,7 +457,7 @@ config MTD_NAND_NOMADIK
 
 config MTD_NAND_SH_FLCTL
 	tristate "Support for NAND on Renesas SuperH FLCTL"
-	depends on MTD_NAND && SUPERH
+	depends on MTD_NAND && (SUPERH || ARCH_SHMOBILE)
 	help
 	  Several Renesas SuperH CPU has FLCTL. This option enables support
 	  for NAND Flash using FLCTL.
diff --git a/drivers/mtd/nand/bcm_umi_nand.c b/drivers/mtd/nand/bcm_umi_nand.c
index 087bcd745bb7..7d1cca7a31a9 100644
--- a/drivers/mtd/nand/bcm_umi_nand.c
+++ b/drivers/mtd/nand/bcm_umi_nand.c
@@ -381,7 +381,7 @@ static int __devinit bcm_umi_nand_probe(struct platform_device *pdev)
 	if (!r)
 		return -ENXIO;
 
-	/* map physical adress */
+	/* map physical address */
 	bcm_umi_io_base = ioremap(r->start, r->end - r->start + 1);
 
 	if (!bcm_umi_io_base) {
@@ -525,7 +525,7 @@ static int bcm_umi_nand_remove(struct platform_device *pdev)
 	/* Release resources, unregister device */
 	nand_release(board_mtd);
 
-	/* unmap physical adress */
+	/* unmap physical address */
 	iounmap(bcm_umi_io_base);
 
 	/* Free the MTD device structure */
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 45dec5770da0..b2900d8406d3 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -507,7 +507,7 @@ static void mxc_do_addr_cycle(struct mtd_info *mtd, int column, int page_addr)
 		 * MXC NANDFC can only perform full page+spare or
 		 * spare-only read/write.  When the upper layers
 		 * layers perform a read/write buf operation,
-		 * we will used the saved column adress to index into
+		 * we will used the saved column address to index into
 		 * the full page.
 		 */
 		send_addr(host, 0, page_addr == -1);
diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index bc45ef9af17d..fad40aa6f099 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -89,7 +89,8 @@ DEFINE_MUTEX(ubi_devices_mutex);
 static DEFINE_SPINLOCK(ubi_devices_lock);
 
 /* "Show" method for files in '/<sysfs>/class/ubi/' */
-static ssize_t ubi_version_show(struct class *class, char *buf)
+static ssize_t ubi_version_show(struct class *class, struct class_attribute *attr,
+				char *buf)
 {
 	return sprintf(buf, "%d\n", UBI_VERSION);
 }
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 7029cd50c458..0ba5b8e50a7c 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -907,7 +907,7 @@ config SMC91X
 	select CRC32
 	select MII
 	depends on ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || \
-		MIPS || BLACKFIN || MN10300
+		MIPS || BLACKFIN || MN10300 || COLDFIRE
 	help
 	  This is a driver for SMC's 91x series of Ethernet chipsets,
 	  including the SMC91C94 and the SMC91C111. Say Y if you want it
diff --git a/drivers/net/arm/ks8695net.c b/drivers/net/arm/ks8695net.c
index 8ca639127dbc..a1d4188c430b 100644
--- a/drivers/net/arm/ks8695net.c
+++ b/drivers/net/arm/ks8695net.c
@@ -575,9 +575,9 @@ static int ks8695_poll(struct napi_struct *napi, int budget)
 	if (work_done < budget) {
 		unsigned long flags;
 		spin_lock_irqsave(&ksp->rx_lock, flags);
+		__napi_complete(napi);
 		/*enable rx interrupt*/
 		writel(isr | mask_bit, KS8695_IRQ_VA + KS8695_INTEN);
-		__napi_complete(napi);
 		spin_unlock_irqrestore(&ksp->rx_lock, flags);
 	}
 	return work_done;
diff --git a/drivers/net/atlx/atl2.h b/drivers/net/atlx/atl2.h
index d918bbe621ea..927e4de6474d 100644
--- a/drivers/net/atlx/atl2.h
+++ b/drivers/net/atlx/atl2.h
@@ -442,7 +442,7 @@ struct atl2_hw {
 struct atl2_ring_header {
     /* pointer to the descriptor ring memory */
     void *desc;
-    /* physical adress of the descriptor ring */
+    /* physical address of the descriptor ring */
     dma_addr_t dma;
     /* length of descriptor ring in bytes */
     unsigned int size;
diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h
index be81fb2d10f7..8f0752553681 100644
--- a/drivers/net/benet/be.h
+++ b/drivers/net/benet/be.h
@@ -290,11 +290,6 @@ extern const struct ethtool_ops be_ethtool_ops;
 
 #define drvr_stats(adapter)		(&adapter->stats.drvr_stats)
 
-static inline unsigned int be_pci_func(struct be_adapter *adapter)
-{
-	return PCI_FUNC(adapter->pdev->devfn);
-}
-
 #define BE_SET_NETDEV_OPS(netdev, ops)	(netdev->netdev_ops = ops)
 
 #define PAGE_SHIFT_4K		12
diff --git a/drivers/net/benet/be_cmds.c b/drivers/net/benet/be_cmds.c
index 4b1f80519ca4..50e6259b50e4 100644
--- a/drivers/net/benet/be_cmds.c
+++ b/drivers/net/benet/be_cmds.c
@@ -465,8 +465,6 @@ int be_cmd_eq_create(struct be_adapter *adapter,
 
 	req->num_pages =  cpu_to_le16(PAGES_4K_SPANNED(q_mem->va, q_mem->size));
 
-	AMAP_SET_BITS(struct amap_eq_context, func, req->context,
-			be_pci_func(adapter));
 	AMAP_SET_BITS(struct amap_eq_context, valid, req->context, 1);
 	/* 4byte eqe*/
 	AMAP_SET_BITS(struct amap_eq_context, size, req->context, 0);
@@ -629,7 +627,6 @@ int be_cmd_cq_create(struct be_adapter *adapter,
 	AMAP_SET_BITS(struct amap_cq_context, eventable, ctxt, 1);
 	AMAP_SET_BITS(struct amap_cq_context, eqid, ctxt, eq->id);
 	AMAP_SET_BITS(struct amap_cq_context, armed, ctxt, 1);
-	AMAP_SET_BITS(struct amap_cq_context, func, ctxt, be_pci_func(adapter));
 	be_dws_cpu_to_le(ctxt, sizeof(req->context));
 
 	be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem);
@@ -676,9 +673,8 @@ int be_cmd_mccq_create(struct be_adapter *adapter,
 	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
 			OPCODE_COMMON_MCC_CREATE, sizeof(*req));
 
-	req->num_pages = PAGES_4K_SPANNED(q_mem->va, q_mem->size);
+	req->num_pages = cpu_to_le16(PAGES_4K_SPANNED(q_mem->va, q_mem->size));
 
-	AMAP_SET_BITS(struct amap_mcc_context, fid, ctxt, be_pci_func(adapter));
 	AMAP_SET_BITS(struct amap_mcc_context, valid, ctxt, 1);
 	AMAP_SET_BITS(struct amap_mcc_context, ring_size, ctxt,
 		be_encoded_q_len(mccq->len));
@@ -727,8 +723,6 @@ int be_cmd_txq_create(struct be_adapter *adapter,
 
 	AMAP_SET_BITS(struct amap_tx_context, tx_ring_size, ctxt,
 		be_encoded_q_len(txq->len));
-	AMAP_SET_BITS(struct amap_tx_context, pci_func_id, ctxt,
-			be_pci_func(adapter));
 	AMAP_SET_BITS(struct amap_tx_context, ctx_valid, ctxt, 1);
 	AMAP_SET_BITS(struct amap_tx_context, cq_id_send, ctxt, cq->id);
 
diff --git a/drivers/net/benet/be_hw.h b/drivers/net/benet/be_hw.h
index 5ffb149181ad..2d4a4b827637 100644
--- a/drivers/net/benet/be_hw.h
+++ b/drivers/net/benet/be_hw.h
@@ -114,8 +114,7 @@
 #define IMG_TYPE_ISCSI_BACKUP		9
 #define IMG_TYPE_FCOE_FW_ACTIVE		10
 #define IMG_TYPE_FCOE_FW_BACKUP 	11
-#define IMG_TYPE_NCSI_BITFILE		13
-#define IMG_TYPE_NCSI_8051		14
+#define IMG_TYPE_NCSI_FW		13
 
 #define FLASHROM_OPER_FLASH		1
 #define FLASHROM_OPER_SAVE		2
@@ -127,6 +126,7 @@
 #define FLASH_IMAGE_MAX_SIZE_g3            (2097152) /* Max fw image size */
 #define FLASH_BIOS_IMAGE_MAX_SIZE_g3       (524288)  /* Max OPTION ROM img sz */
 #define FLASH_REDBOOT_IMAGE_MAX_SIZE_g3	  (1048576)  /* Max Redboot image sz */
+#define FLASH_NCSI_IMAGE_MAX_SIZE_g3       (262144)  /* Max NSCI image sz */
 
 #define FLASH_NCSI_MAGIC		(0x16032009)
 #define FLASH_NCSI_DISABLED		(0)
@@ -144,6 +144,7 @@
 #define FLASH_FCoE_BIOS_START_g2           (524288)
 #define FLASH_REDBOOT_START_g2		  (0)
 
+#define FLASH_NCSI_START_g3		   (15990784)
 #define FLASH_iSCSI_PRIMARY_IMAGE_START_g3 (2097152)
 #define FLASH_iSCSI_BACKUP_IMAGE_START_g3  (4194304)
 #define FLASH_FCoE_PRIMARY_IMAGE_START_g3  (6291456)
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index a703ed8e24fe..43e8032f9236 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -1382,7 +1382,7 @@ rx_eq_free:
 /* There are 8 evt ids per func. Retruns the evt id's bit number */
 static inline int be_evt_bit_get(struct be_adapter *adapter, u32 eq_id)
 {
-	return eq_id - 8 * be_pci_func(adapter);
+	return eq_id % 8;
 }
 
 static irqreturn_t be_intx(int irq, void *dev)
@@ -1880,8 +1880,9 @@ static int be_flash_data(struct be_adapter *adapter,
 	const u8 *p = fw->data;
 	struct be_cmd_write_flashrom *req = flash_cmd->va;
 	struct flash_comp *pflashcomp;
+	int num_comp;
 
-	struct flash_comp gen3_flash_types[8] = {
+	struct flash_comp gen3_flash_types[9] = {
 		{ FLASH_iSCSI_PRIMARY_IMAGE_START_g3, IMG_TYPE_ISCSI_ACTIVE,
 			FLASH_IMAGE_MAX_SIZE_g3},
 		{ FLASH_REDBOOT_START_g3, IMG_TYPE_REDBOOT,
@@ -1897,7 +1898,9 @@ static int be_flash_data(struct be_adapter *adapter,
 		{ FLASH_FCoE_PRIMARY_IMAGE_START_g3, IMG_TYPE_FCOE_FW_ACTIVE,
 			FLASH_IMAGE_MAX_SIZE_g3},
 		{ FLASH_FCoE_BACKUP_IMAGE_START_g3, IMG_TYPE_FCOE_FW_BACKUP,
-			FLASH_IMAGE_MAX_SIZE_g3}
+			FLASH_IMAGE_MAX_SIZE_g3},
+		{ FLASH_NCSI_START_g3, IMG_TYPE_NCSI_FW,
+			FLASH_NCSI_IMAGE_MAX_SIZE_g3}
 	};
 	struct flash_comp gen2_flash_types[8] = {
 		{ FLASH_iSCSI_PRIMARY_IMAGE_START_g2, IMG_TYPE_ISCSI_ACTIVE,
@@ -1921,11 +1924,16 @@ static int be_flash_data(struct be_adapter *adapter,
 	if (adapter->generation == BE_GEN3) {
 		pflashcomp = gen3_flash_types;
 		filehdr_size = sizeof(struct flash_file_hdr_g3);
+		num_comp = 9;
 	} else {
 		pflashcomp = gen2_flash_types;
 		filehdr_size = sizeof(struct flash_file_hdr_g2);
+		num_comp = 8;
 	}
-	for (i = 0; i < 8; i++) {
+	for (i = 0; i < num_comp; i++) {
+		if ((pflashcomp[i].optype == IMG_TYPE_NCSI_FW) &&
+				memcmp(adapter->fw_ver, "3.102.148.0", 11) < 0)
+			continue;
 		if ((pflashcomp[i].optype == IMG_TYPE_REDBOOT) &&
 			(!be_flash_redboot(adapter, fw->data,
 			 pflashcomp[i].offset, pflashcomp[i].size,
@@ -1985,16 +1993,7 @@ int be_load_fw(struct be_adapter *adapter, u8 *func)
 	struct be_dma_mem flash_cmd;
 	int status, i = 0;
 	const u8 *p;
-	char fw_ver[FW_VER_LEN];
-	char fw_cfg;
-
-	status = be_cmd_get_fw_ver(adapter, fw_ver);
-	if (status)
-		return status;
 
-	fw_cfg = *(fw_ver + 2);
-	if (fw_cfg == '0')
-		fw_cfg = '1';
 	strcpy(fw_file, func);
 
 	status = request_firmware(&fw, fw_file, &adapter->pdev->dev);
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index ed785a30e98b..6c042a72d6cc 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -893,7 +893,6 @@ static inline u16 bnx2x_tx_avail(struct bnx2x_fastpath *fp)
 	u16 prod;
 	u16 cons;
 
-	barrier(); /* Tell compiler that prod and cons can change */
 	prod = fp->tx_bd_prod;
 	cons = fp->tx_bd_cons;
 
@@ -963,7 +962,7 @@ static int bnx2x_tx_int(struct bnx2x_fastpath *fp)
 	 * start_xmit() will miss it and cause the queue to be stopped
 	 * forever.
 	 */
-	smp_wmb();
+	smp_mb();
 
 	/* TBD need a thresh? */
 	if (unlikely(netif_tx_queue_stopped(txq))) {
@@ -11429,9 +11428,12 @@ static netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	if (unlikely(bnx2x_tx_avail(fp) < MAX_SKB_FRAGS + 3)) {
 		netif_tx_stop_queue(txq);
-		/* We want bnx2x_tx_int to "see" the updated tx_bd_prod
-		   if we put Tx into XOFF state. */
+
+		/* paired memory barrier is in bnx2x_tx_int(), we have to keep
+		 * ordering of set_bit() in netif_tx_stop_queue() and read of
+		 * fp->bd_tx_cons */
 		smp_mb();
+
 		fp->eth_q_stats.driver_xoff++;
 		if (bnx2x_tx_avail(fp) >= MAX_SKB_FRAGS + 3)
 			netif_tx_wake_queue(txq);
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index 5acd557cea9b..b8bec086daa1 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -51,7 +51,9 @@
  * "show" function for the bond_masters attribute.
  * The class parameter is ignored.
  */
-static ssize_t bonding_show_bonds(struct class *cls, char *buf)
+static ssize_t bonding_show_bonds(struct class *cls,
+				  struct class_attribute *attr,
+				  char *buf)
 {
 	struct net *net = current->nsproxy->net_ns;
 	struct bond_net *bn = net_generic(net, bond_net_id);
@@ -98,6 +100,7 @@ static struct net_device *bond_get_by_name(struct net *net, const char *ifname)
  */
 
 static ssize_t bonding_store_bonds(struct class *cls,
+				   struct class_attribute *attr,
 				   const char *buffer, size_t count)
 {
 	struct net *net = current->nsproxy->net_ns;
diff --git a/drivers/net/can/bfin_can.c b/drivers/net/can/bfin_can.c
index bf7f9ba2d903..866905fa4119 100644
--- a/drivers/net/can/bfin_can.c
+++ b/drivers/net/can/bfin_can.c
@@ -26,6 +26,7 @@
 
 #define DRV_NAME "bfin_can"
 #define BFIN_CAN_TIMEOUT 100
+#define TX_ECHO_SKB_MAX  1
 
 /*
  * transmit and receive channels
@@ -593,7 +594,7 @@ struct net_device *alloc_bfin_candev(void)
 	struct net_device *dev;
 	struct bfin_can_priv *priv;
 
-	dev = alloc_candev(sizeof(*priv));
+	dev = alloc_candev(sizeof(*priv), TX_ECHO_SKB_MAX);
 	if (!dev)
 		return NULL;
 
diff --git a/drivers/net/can/usb/ems_usb.c b/drivers/net/can/usb/ems_usb.c
index 11c87840cc00..33451092b8e8 100644
--- a/drivers/net/can/usb/ems_usb.c
+++ b/drivers/net/can/usb/ems_usb.c
@@ -876,9 +876,7 @@ static netdev_tx_t ems_usb_start_xmit(struct sk_buff *skb, struct net_device *ne
 	return NETDEV_TX_OK;
 
 nomem:
-	if (skb)
-		dev_kfree_skb(skb);
-
+	dev_kfree_skb(skb);
 	stats->tx_dropped++;
 
 	return NETDEV_TX_OK;
diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c
index 7cbcfb0ade1c..9bd155e4111c 100644
--- a/drivers/net/cassini.c
+++ b/drivers/net/cassini.c
@@ -5072,7 +5072,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev,
 	INIT_WORK(&cp->reset_task, cas_reset_task);
 
 	/* Default link parameters */
-	if (link_mode >= 0 && link_mode <= 6)
+	if (link_mode >= 0 && link_mode < 6)
 		cp->link_cntl = link_modes[link_mode];
 	else
 		cp->link_cntl = BMCR_ANENABLE;
diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c
index 71384114a4ed..55d99ca82f8a 100644
--- a/drivers/net/chelsio/sge.c
+++ b/drivers/net/chelsio/sge.c
@@ -248,7 +248,7 @@ static void restart_sched(unsigned long);
  *
  * Interrupts are handled by a single CPU and it is likely that on a MP system
  * the application is migrated to another CPU. In that scenario, we try to
- * seperate the RX(in irq context) and TX state in order to decrease memory
+ * separate the RX(in irq context) and TX state in order to decrease memory
  * contention.
  */
 struct sge {
diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c
index b85c81f60d10..60777fd90b33 100644
--- a/drivers/net/cpmac.c
+++ b/drivers/net/cpmac.c
@@ -28,6 +28,7 @@
 #include <linux/delay.h>
 
 #include <linux/netdevice.h>
+#include <linux/if_vlan.h>
 #include <linux/etherdevice.h>
 #include <linux/ethtool.h>
 #include <linux/skbuff.h>
@@ -55,9 +56,9 @@ module_param(dumb_switch, int, 0444);
 MODULE_PARM_DESC(debug_level, "Number of NETIF_MSG bits to enable");
 MODULE_PARM_DESC(dumb_switch, "Assume switch is not connected to MDIO bus");
 
-#define CPMAC_VERSION "0.5.1"
-/* frame size + 802.1q tag */
-#define CPMAC_SKB_SIZE		(ETH_FRAME_LEN + 4)
+#define CPMAC_VERSION "0.5.2"
+/* frame size + 802.1q tag + FCS size */
+#define CPMAC_SKB_SIZE		(ETH_FRAME_LEN + ETH_FCS_LEN + VLAN_HLEN)
 #define CPMAC_QUEUES	8
 
 /* Ethernet registers */
@@ -1136,8 +1137,9 @@ static int __devinit cpmac_probe(struct platform_device *pdev)
 	}
 
 	if (phy_id == PHY_MAX_ADDR) {
-		dev_err(&pdev->dev, "no PHY present\n");
-		return -ENODEV;
+		dev_err(&pdev->dev, "no PHY present, falling back to switch on MDIO bus 0\n");
+		strncpy(mdio_bus_id, "0", MII_BUS_ID_SIZE); /* fixed phys bus */
+		phy_id = pdev->id;
 	}
 
 	dev = alloc_etherdev_mq(sizeof(*priv), CPMAC_QUEUES);
@@ -1290,8 +1292,8 @@ void __devexit cpmac_exit(void)
 {
 	platform_driver_unregister(&cpmac_driver);
 	mdiobus_unregister(cpmac_mii);
-	mdiobus_free(cpmac_mii);
 	iounmap(cpmac_mii->priv);
+	mdiobus_free(cpmac_mii);
 }
 
 module_init(cpmac_init);
diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c
index 14624019ce71..b0208e474f7e 100644
--- a/drivers/net/cs89x0.c
+++ b/drivers/net/cs89x0.c
@@ -580,7 +580,7 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular)
 	}
 
 #ifdef CONFIG_SH_HICOSH4
-	/* truely reset the chip */
+	/* truly reset the chip */
 	writeword(ioaddr, ADD_PORT, 0x0114);
 	writeword(ioaddr, DATA_PORT, 0x0040);
 #endif
diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c
index 3e453e1d97e7..9e3e8750b46a 100644
--- a/drivers/net/cxgb3/cxgb3_main.c
+++ b/drivers/net/cxgb3/cxgb3_main.c
@@ -1294,6 +1294,7 @@ static void cxgb_down(struct adapter *adapter)
 
 	free_irq_resources(adapter);
 	quiesce_rx(adapter);
+	t3_sge_stop(adapter);
 	flush_workqueue(cxgb3_wq);	/* wait for external IRQ handler */
 }
 
diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c
index 78e265b484b6..67e61b2a8c42 100644
--- a/drivers/net/cxgb3/sge.c
+++ b/drivers/net/cxgb3/sge.c
@@ -197,13 +197,13 @@ static inline void refill_rspq(struct adapter *adapter,
 /**
  *	need_skb_unmap - does the platform need unmapping of sk_buffs?
  *
- *	Returns true if the platfrom needs sk_buff unmapping.  The compiler
+ *	Returns true if the platform needs sk_buff unmapping.  The compiler
  *	optimizes away unecessary code if this returns true.
  */
 static inline int need_skb_unmap(void)
 {
 	/*
-	 * This structure is used to tell if the platfrom needs buffer
+	 * This structure is used to tell if the platform needs buffer
 	 * unmapping by checking if DECLARE_PCI_UNMAP_ADDR defines anything.
 	 */
 	struct dummy {
diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index 1ac9440eb3fb..2b8edd2efbf6 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -29,10 +29,6 @@
  *     PHY layer usage
  */
 
-/** Pending Items in this driver:
- * 1. Use Linux cache infrastcture for DMA'ed memory (dma_xxx functions)
- */
-
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
@@ -504,12 +500,6 @@ static unsigned long mdio_max_freq;
 
 /* Cache macros - Packet buffers would be from skb pool which is cached */
 #define EMAC_VIRT_NOCACHE(addr) (addr)
-#define EMAC_CACHE_INVALIDATE(addr, size) \
-	dma_cache_maint((void *)addr, size, DMA_FROM_DEVICE)
-#define EMAC_CACHE_WRITEBACK(addr, size) \
-	dma_cache_maint((void *)addr, size, DMA_TO_DEVICE)
-#define EMAC_CACHE_WRITEBACK_INVALIDATE(addr, size) \
-	dma_cache_maint((void *)addr, size, DMA_BIDIRECTIONAL)
 
 /* DM644x does not have BD's in cached memory - so no cache functions */
 #define BD_CACHE_INVALIDATE(addr, size)
@@ -1235,6 +1225,10 @@ static void emac_txch_teardown(struct emac_priv *priv, u32 ch)
 	if (1 == txch->queue_active) {
 		curr_bd = txch->active_queue_head;
 		while (curr_bd != NULL) {
+			dma_unmap_single(emac_dev, curr_bd->buff_ptr,
+				curr_bd->off_b_len & EMAC_RX_BD_BUF_SIZE,
+				DMA_TO_DEVICE);
+
 			emac_net_tx_complete(priv, (void __force *)
 					&curr_bd->buf_token, 1, ch);
 			if (curr_bd != txch->active_queue_tail)
@@ -1327,6 +1321,11 @@ static int emac_tx_bdproc(struct emac_priv *priv, u32 ch, u32 budget)
 				txch->queue_active = 0; /* end of queue */
 			}
 		}
+
+		dma_unmap_single(emac_dev, curr_bd->buff_ptr,
+				curr_bd->off_b_len & EMAC_RX_BD_BUF_SIZE,
+				DMA_TO_DEVICE);
+
 		*tx_complete_ptr = (u32) curr_bd->buf_token;
 		++tx_complete_ptr;
 		++tx_complete_cnt;
@@ -1387,8 +1386,8 @@ static int emac_send(struct emac_priv *priv, struct emac_netpktobj *pkt, u32 ch)
 
 	txch->bd_pool_head = curr_bd->next;
 	curr_bd->buf_token = buf_list->buf_token;
-	/* FIXME buff_ptr = dma_map_single(... data_ptr ...) */
-	curr_bd->buff_ptr = virt_to_phys(buf_list->data_ptr);
+	curr_bd->buff_ptr = dma_map_single(&priv->ndev->dev, buf_list->data_ptr,
+			buf_list->length, DMA_TO_DEVICE);
 	curr_bd->off_b_len = buf_list->length;
 	curr_bd->h_next = 0;
 	curr_bd->next = NULL;
@@ -1468,7 +1467,6 @@ static int emac_dev_xmit(struct sk_buff *skb, struct net_device *ndev)
 	tx_buf.length = skb->len;
 	tx_buf.buf_token = (void *)skb;
 	tx_buf.data_ptr = skb->data;
-	EMAC_CACHE_WRITEBACK((unsigned long)skb->data, skb->len);
 	ndev->trans_start = jiffies;
 	ret_code = emac_send(priv, &tx_packet, EMAC_DEF_TX_CH);
 	if (unlikely(ret_code != 0)) {
@@ -1543,7 +1541,6 @@ static void *emac_net_alloc_rx_buf(struct emac_priv *priv, int buf_size,
 	p_skb->dev = ndev;
 	skb_reserve(p_skb, NET_IP_ALIGN);
 	*data_token = (void *) p_skb;
-	EMAC_CACHE_WRITEBACK_INVALIDATE((unsigned long)p_skb->data, buf_size);
 	return p_skb->data;
 }
 
@@ -1612,8 +1609,8 @@ static int emac_init_rxch(struct emac_priv *priv, u32 ch, char *param)
 		/* populate the hardware descriptor */
 		curr_bd->h_next = emac_virt_to_phys(rxch->active_queue_head,
 				priv);
-		/* FIXME buff_ptr = dma_map_single(... data_ptr ...) */
-		curr_bd->buff_ptr = virt_to_phys(curr_bd->data_ptr);
+		curr_bd->buff_ptr = dma_map_single(emac_dev, curr_bd->data_ptr,
+				rxch->buf_size, DMA_FROM_DEVICE);
 		curr_bd->off_b_len = rxch->buf_size;
 		curr_bd->mode = EMAC_CPPI_OWNERSHIP_BIT;
 
@@ -1697,6 +1694,12 @@ static void emac_cleanup_rxch(struct emac_priv *priv, u32 ch)
 		curr_bd = rxch->active_queue_head;
 		while (curr_bd) {
 			if (curr_bd->buf_token) {
+				dma_unmap_single(&priv->ndev->dev,
+					curr_bd->buff_ptr,
+					curr_bd->off_b_len
+						& EMAC_RX_BD_BUF_SIZE,
+					DMA_FROM_DEVICE);
+
 				dev_kfree_skb_any((struct sk_buff *)\
 						  curr_bd->buf_token);
 			}
@@ -1871,8 +1874,8 @@ static void emac_addbd_to_rx_queue(struct emac_priv *priv, u32 ch,
 
 	/* populate the hardware descriptor */
 	curr_bd->h_next = 0;
-	/* FIXME buff_ptr = dma_map_single(... buffer ...) */
-	curr_bd->buff_ptr = virt_to_phys(buffer);
+	curr_bd->buff_ptr = dma_map_single(&priv->ndev->dev, buffer,
+				rxch->buf_size, DMA_FROM_DEVICE);
 	curr_bd->off_b_len = rxch->buf_size;
 	curr_bd->mode = EMAC_CPPI_OWNERSHIP_BIT;
 	curr_bd->next = NULL;
@@ -1927,7 +1930,6 @@ static int emac_net_rx_cb(struct emac_priv *priv,
 	p_skb = (struct sk_buff *)net_pkt_list->pkt_token;
 	/* set length of packet */
 	skb_put(p_skb, net_pkt_list->pkt_length);
-	EMAC_CACHE_INVALIDATE((unsigned long)p_skb->data, p_skb->len);
 	p_skb->protocol = eth_type_trans(p_skb, priv->ndev);
 	netif_receive_skb(p_skb);
 	priv->net_dev_stats.rx_bytes += net_pkt_list->pkt_length;
@@ -1990,6 +1992,11 @@ static int emac_rx_bdproc(struct emac_priv *priv, u32 ch, u32 budget)
 		rx_buf_obj->data_ptr = (char *)curr_bd->data_ptr;
 		rx_buf_obj->length = curr_bd->off_b_len & EMAC_RX_BD_BUF_SIZE;
 		rx_buf_obj->buf_token = curr_bd->buf_token;
+
+		dma_unmap_single(&priv->ndev->dev, curr_bd->buff_ptr,
+				curr_bd->off_b_len & EMAC_RX_BD_BUF_SIZE,
+				DMA_FROM_DEVICE);
+
 		curr_pkt->pkt_token = curr_pkt->buf_list->buf_token;
 		curr_pkt->num_bufs = 1;
 		curr_pkt->pkt_length =
@@ -2385,7 +2392,7 @@ static int emac_dev_open(struct net_device *ndev)
 	struct emac_priv *priv = netdev_priv(ndev);
 
 	netif_carrier_off(ndev);
-	for (cnt = 0; cnt <= ETH_ALEN; cnt++)
+	for (cnt = 0; cnt < ETH_ALEN; cnt++)
 		ndev->dev_addr[cnt] = priv->mac_addr[cnt];
 
 	/* Configuration items */
@@ -2658,7 +2665,7 @@ static int __devinit davinci_emac_probe(struct platform_device *pdev)
 
 	pdata = pdev->dev.platform_data;
 	if (!pdata) {
-		printk(KERN_ERR "DaVinci EMAC: No platfrom data\n");
+		printk(KERN_ERR "DaVinci EMAC: No platform data\n");
 		return -ENODEV;
 	}
 
@@ -2820,31 +2827,37 @@ static int __devexit davinci_emac_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static
-int davinci_emac_suspend(struct platform_device *pdev, pm_message_t state)
+static int davinci_emac_suspend(struct device *dev)
 {
-	struct net_device *dev = platform_get_drvdata(pdev);
+	struct platform_device *pdev = to_platform_device(dev);
+	struct net_device *ndev = platform_get_drvdata(pdev);
 
-	if (netif_running(dev))
-		emac_dev_stop(dev);
+	if (netif_running(ndev))
+		emac_dev_stop(ndev);
 
 	clk_disable(emac_clk);
 
 	return 0;
 }
 
-static int davinci_emac_resume(struct platform_device *pdev)
+static int davinci_emac_resume(struct device *dev)
 {
-	struct net_device *dev = platform_get_drvdata(pdev);
+	struct platform_device *pdev = to_platform_device(dev);
+	struct net_device *ndev = platform_get_drvdata(pdev);
 
 	clk_enable(emac_clk);
 
-	if (netif_running(dev))
-		emac_dev_open(dev);
+	if (netif_running(ndev))
+		emac_dev_open(ndev);
 
 	return 0;
 }
 
+static const struct dev_pm_ops davinci_emac_pm_ops = {
+	.suspend	= davinci_emac_suspend,
+	.resume		= davinci_emac_resume,
+};
+
 /**
  * davinci_emac_driver: EMAC platform driver structure
  */
@@ -2852,11 +2865,10 @@ static struct platform_driver davinci_emac_driver = {
 	.driver = {
 		.name	 = "davinci_emac",
 		.owner	 = THIS_MODULE,
+		.pm	 = &davinci_emac_pm_ops,
 	},
 	.probe = davinci_emac_probe,
 	.remove = __devexit_p(davinci_emac_remove),
-	.suspend = davinci_emac_suspend,
-	.resume = davinci_emac_resume,
 };
 
 /**
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index a26ccab057d5..b997e578e58f 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -2858,7 +2858,7 @@ static int __devinit e100_probe(struct pci_dev *pdev,
 	}
 	nic->cbs_pool = pci_pool_create(netdev->name,
 			   nic->pdev,
-			   nic->params.cbs.count * sizeof(struct cb),
+			   nic->params.cbs.max * sizeof(struct cb),
 			   sizeof(u32),
 			   0);
 	DPRINTK(PROBE, INFO, "addr 0x%llx, irq %d, MAC addr %pM\n",
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index 3c95acb3a87d..712ccc66ba25 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -1346,7 +1346,7 @@ static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw)
  *
  *  1) down
  *  2) autoneg_progress
- *  3) autoneg_complete (the link sucessfully autonegotiated)
+ *  3) autoneg_complete (the link successfully autonegotiated)
  *  4) forced_up (the link has been forced up, it did not autonegotiate)
  *
  **/
diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index db05ec355749..e301e26d6897 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h
@@ -320,6 +320,8 @@
 #define E1000_RXCSUM_IPPCSE    0x00001000   /* IP payload checksum enable */
 
 /* Header split receive */
+#define E1000_RFCTL_NFSW_DIS            0x00000040
+#define E1000_RFCTL_NFSR_DIS            0x00000080
 #define E1000_RFCTL_ACK_DIS             0x00001000
 #define E1000_RFCTL_EXTEN               0x00008000
 #define E1000_RFCTL_IPV6_EX_DIS         0x00010000
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 54d03a0ce3ce..8b5e157e9c87 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -2740,6 +2740,16 @@ static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw)
 		reg &= ~(1 << 31);
 		ew32(STATUS, reg);
 	}
+
+	/*
+	 * work-around descriptor data corruption issue during nfs v2 udp
+	 * traffic, just disable the nfs filtering capability
+	 */
+	reg = er32(RFCTL);
+	reg |= (E1000_RFCTL_NFSW_DIS | E1000_RFCTL_NFSR_DIS);
+	ew32(RFCTL, reg);
+
+	return;
 }
 
 /**
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index 2425ed11d5cc..a8b2c0de27c4 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -647,7 +647,7 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw)
 				if (!(rxcw & E1000_RXCW_IV)) {
 					mac->serdes_has_link = true;
 					e_dbg("SERDES: Link up - autoneg "
-					   "completed sucessfully.\n");
+					   "completed successfully.\n");
 				} else {
 					mac->serdes_has_link = false;
 					e_dbg("SERDES: Link down - invalid"
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 61a7b4351e78..b6715553cf17 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -2021,7 +2021,6 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	}
 
 	/* setup the TxBD length and buffer pointer for the first BD */
-	tx_queue->tx_skbuff[tx_queue->skb_curtx] = skb;
 	txbdp_start->bufPtr = dma_map_single(&priv->ofdev->dev, skb->data,
 			skb_headlen(skb), DMA_TO_DEVICE);
 
@@ -2053,6 +2052,10 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	txbdp_start->lstatus = lstatus;
 
+	eieio(); /* force lstatus write before tx_skbuff */
+
+	tx_queue->tx_skbuff[tx_queue->skb_curtx] = skb;
+
 	/* Update the current skb pointer to the next entry we will use
 	 * (wrapping if necessary) */
 	tx_queue->skb_curtx = (tx_queue->skb_curtx + 1) &
diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c
index f2b937966950..0bc777bac9b4 100644
--- a/drivers/net/ibmveth.c
+++ b/drivers/net/ibmveth.c
@@ -1577,7 +1577,7 @@ static struct attribute * veth_pool_attrs[] = {
 	NULL,
 };
 
-static struct sysfs_ops veth_pool_ops = {
+static const struct sysfs_ops veth_pool_ops = {
 	.show   = veth_pool_show,
 	.store  = veth_pool_store,
 };
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 583a21c1def3..0ed25f059a00 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -688,7 +688,7 @@ static void igb_set_interrupt_capability(struct igb_adapter *adapter)
 	/* start with one vector for every rx queue */
 	numvecs = adapter->num_rx_queues;
 
-	/* if tx handler is seperate add 1 for every tx queue */
+	/* if tx handler is separate add 1 for every tx queue */
 	if (!(adapter->flags & IGB_FLAG_QUEUE_PAIRS))
 		numvecs += adapter->num_tx_queues;
 
diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c
index e8e33bb9d876..2c9b3af16612 100644
--- a/drivers/net/irda/irda-usb.c
+++ b/drivers/net/irda/irda-usb.c
@@ -1651,6 +1651,8 @@ static int irda_usb_probe(struct usb_interface *intf,
 
 	self->rx_urb = kcalloc(self->max_rx_urb, sizeof(struct urb *),
 				GFP_KERNEL);
+	if (!self->rx_urb)
+		goto err_free_net;
 
 	for (i = 0; i < self->max_rx_urb; i++) {
 		self->rx_urb[i] = usb_alloc_urb(0, GFP_KERNEL);
@@ -1783,6 +1785,8 @@ err_out_2:
 err_out_1:
 	for (i = 0; i < self->max_rx_urb; i++)
 		usb_free_urb(self->rx_urb[i]);
+	kfree(self->rx_urb);
+err_free_net:
 	free_netdev(net);
 err_out:
 	return ret;
diff --git a/drivers/net/irda/sa1100_ir.c b/drivers/net/irda/sa1100_ir.c
index c412e8026173..1dcdce0631aa 100644
--- a/drivers/net/irda/sa1100_ir.c
+++ b/drivers/net/irda/sa1100_ir.c
@@ -331,7 +331,7 @@ static int sa1100_irda_resume(struct platform_device *pdev)
 		 * If we missed a speed change, initialise at the new speed
 		 * directly.  It is debatable whether this is actually
 		 * required, but in the interests of continuing from where
-		 * we left off it is desireable.  The converse argument is
+		 * we left off it is desirable.  The converse argument is
 		 * that we should re-negotiate at 9600 baud again.
 		 */
 		if (si->newspeed) {
diff --git a/drivers/net/irda/w83977af_ir.c b/drivers/net/irda/w83977af_ir.c
index 551810fd2976..980625feb2c0 100644
--- a/drivers/net/irda/w83977af_ir.c
+++ b/drivers/net/irda/w83977af_ir.c
@@ -65,7 +65,6 @@
 #undef  CONFIG_NETWINDER_TX_DMA_PROBLEMS /* Not needed */
 #define CONFIG_NETWINDER_RX_DMA_PROBLEMS /* Must have this one! */
 #endif
-#undef  CONFIG_USE_INTERNAL_TIMER  /* Just cannot make that timer work */
 #define CONFIG_USE_W977_PNP        /* Currently needed */
 #define PIO_MAX_SPEED       115200 
 
@@ -533,25 +532,6 @@ static netdev_tx_t w83977af_hard_xmit(struct sk_buff *skb,
 		self->tx_buff.len = skb->len;
 		
 		mtt = irda_get_mtt(skb);
-#ifdef CONFIG_USE_INTERNAL_TIMER
-	        if (mtt > 50) {
-			/* Adjust for timer resolution */
-			mtt /= 1000+1;
-
-			/* Setup timer */
-			switch_bank(iobase, SET4);
-			outb(mtt & 0xff, iobase+TMRL);
-			outb((mtt >> 8) & 0x0f, iobase+TMRH);
-			
-			/* Start timer */
-			outb(IR_MSL_EN_TMR, iobase+IR_MSL);
-			self->io.direction = IO_XMIT;
-			
-			/* Enable timer interrupt */
-			switch_bank(iobase, SET0);
-			outb(ICR_ETMRI, iobase+ICR);
-		} else {
-#endif
 			IRDA_DEBUG(4, "%s(%ld), mtt=%d\n", __func__ , jiffies, mtt);
 			if (mtt)
 				udelay(mtt);
@@ -560,9 +540,6 @@ static netdev_tx_t w83977af_hard_xmit(struct sk_buff *skb,
 			switch_bank(iobase, SET0);
 	 		outb(ICR_EDMAI, iobase+ICR);
 	     		w83977af_dma_write(self, iobase);
-#ifdef CONFIG_USE_INTERNAL_TIMER
-		}
-#endif
 	} else {
 		self->tx_buff.data = self->tx_buff.head;
 		self->tx_buff.len = async_wrap_skb(skb, self->tx_buff.data, 
@@ -876,20 +853,7 @@ static int w83977af_dma_receive_complete(struct w83977af_ir *self)
 			/* Check if we have transferred all data to memory */
 			switch_bank(iobase, SET0);
 			if (inb(iobase+USR) & USR_RDR) {
-#ifdef CONFIG_USE_INTERNAL_TIMER
-				/* Put this entry back in fifo */
-				st_fifo->head--;
-				st_fifo->len++;
-				st_fifo->entries[st_fifo->head].status = status;
-				st_fifo->entries[st_fifo->head].len = len;
-				
-				/* Restore set register */
-				outb(set, iobase+SSR);
-			
-				return FALSE; 	/* I'll be back! */
-#else
 				udelay(80); /* Should be enough!? */
-#endif
 			}
 						
 			skb = dev_alloc_skb(len+1);
diff --git a/drivers/net/iseries_veth.c b/drivers/net/iseries_veth.c
index 966de5d69521..e6e972d9b7ca 100644
--- a/drivers/net/iseries_veth.c
+++ b/drivers/net/iseries_veth.c
@@ -384,7 +384,7 @@ static struct attribute *veth_cnx_default_attrs[] = {
 	NULL
 };
 
-static struct sysfs_ops veth_cnx_sysfs_ops = {
+static const struct sysfs_ops veth_cnx_sysfs_ops = {
 		.show = veth_cnx_attribute_show
 };
 
@@ -441,7 +441,7 @@ static struct attribute *veth_port_default_attrs[] = {
 	NULL
 };
 
-static struct sysfs_ops veth_port_sysfs_ops = {
+static const struct sysfs_ops veth_port_sysfs_ops = {
 	.show = veth_port_attribute_show
 };
 
diff --git a/drivers/net/ks8851.c b/drivers/net/ks8851.c
index b5219cce12ed..0573e0bb4444 100644
--- a/drivers/net/ks8851.c
+++ b/drivers/net/ks8851.c
@@ -407,7 +407,7 @@ static irqreturn_t ks8851_irq(int irq, void *pw)
  * @buff: The buffer address
  * @len: The length of the data to read
  *
- * Issue an RXQ FIFO read command and read the @len ammount of data from
+ * Issue an RXQ FIFO read command and read the @len amount of data from
  * the FIFO into the buffer specified by @buff.
  */
 static void ks8851_rdfifo(struct ks8851_net *ks, u8 *buff, unsigned len)
diff --git a/drivers/net/ksz884x.c b/drivers/net/ksz884x.c
index 7264a3e5c2c0..0f59099ee72f 100644
--- a/drivers/net/ksz884x.c
+++ b/drivers/net/ksz884x.c
@@ -4899,8 +4899,10 @@ static int netdev_tx(struct sk_buff *skb, struct net_device *dev)
 			struct sk_buff *org_skb = skb;
 
 			skb = dev_alloc_skb(org_skb->len);
-			if (!skb)
-				return NETDEV_TX_BUSY;
+			if (!skb) {
+				rc = NETDEV_TX_BUSY;
+				goto unlock;
+			}
 			skb_copy_and_csum_dev(org_skb, skb->data);
 			org_skb->ip_summed = 0;
 			skb->len = org_skb->len;
@@ -4914,7 +4916,7 @@ static int netdev_tx(struct sk_buff *skb, struct net_device *dev)
 		netif_stop_queue(dev);
 		rc = NETDEV_TX_BUSY;
 	}
-
+unlock:
 	spin_unlock_irq(&hw_priv->hwlock);
 
 	return rc;
diff --git a/drivers/net/mlx4/main.c b/drivers/net/mlx4/main.c
index 8f6e816a7395..b402a95c87c7 100644
--- a/drivers/net/mlx4/main.c
+++ b/drivers/net/mlx4/main.c
@@ -1023,6 +1023,7 @@ static int mlx4_init_port_info(struct mlx4_dev *dev, int port)
 	info->port_attr.attr.mode = S_IRUGO | S_IWUSR;
 	info->port_attr.show      = show_port_type;
 	info->port_attr.store     = set_port_type;
+	sysfs_attr_init(&info->port_attr.attr);
 
 	err = device_create_file(&dev->pdev->dev, &info->port_attr);
 	if (err) {
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index 676c513e12fc..e84dd3ee9c5a 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -3687,7 +3687,6 @@ static void myri10ge_probe_slices(struct myri10ge_priv *mgp)
 	if (status != 0) {
 		dev_err(&mgp->pdev->dev, "failed reset\n");
 		goto abort_with_fw;
-		return;
 	}
 
 	mgp->max_intr_slots = cmd.data0 / sizeof(struct mcp_slot);
diff --git a/drivers/net/ne.c b/drivers/net/ne.c
index 992dbfffdb05..f4347f88b6f2 100644
--- a/drivers/net/ne.c
+++ b/drivers/net/ne.c
@@ -142,7 +142,7 @@ bad_clone_list[] __initdata = {
     {"PCM-4823", "PCM-4823", {0x00, 0xc0, 0x6c}}, /* Broken Advantech MoBo */
     {"REALTEK", "RTL8019", {0x00, 0x00, 0xe8}}, /* no-name with Realtek chip */
 #ifdef CONFIG_MACH_TX49XX
-    {"RBHMA4X00-RTL8019", "RBHMA4X00/RTL8019", {0x00, 0x60, 0x0a}},  /* Toshiba built-in */
+    {"RBHMA4X00-RTL8019", "RBHMA4X00-RTL8019", {0x00, 0x60, 0x0a}},  /* Toshiba built-in */
 #endif
     {"LCS-8834", "LCS-8836", {0x04, 0x04, 0x37}}, /* ShinyNet (SET) */
     {NULL,}
diff --git a/drivers/net/pppol2tp.c b/drivers/net/pppol2tp.c
index 9fbb2eba9a06..449a9825200d 100644
--- a/drivers/net/pppol2tp.c
+++ b/drivers/net/pppol2tp.c
@@ -756,6 +756,7 @@ static int pppol2tp_recv_core(struct sock *sock, struct sk_buff *skb)
 
 	/* Try to dequeue as many skbs from reorder_q as we can. */
 	pppol2tp_recv_dequeue(session);
+	sock_put(sock);
 
 	return 0;
 
@@ -772,6 +773,7 @@ discard_bad_csum:
 	UDP_INC_STATS_USER(&init_net, UDP_MIB_INERRORS, 0);
 	tunnel->stats.rx_errors++;
 	kfree_skb(skb);
+	sock_put(sock);
 
 	return 0;
 
@@ -1180,7 +1182,8 @@ static int pppol2tp_xmit(struct ppp_channel *chan, struct sk_buff *skb)
 	/* Calculate UDP checksum if configured to do so */
 	if (sk_tun->sk_no_check == UDP_CSUM_NOXMIT)
 		skb->ip_summed = CHECKSUM_NONE;
-	else if (!(skb_dst(skb)->dev->features & NETIF_F_V4_CSUM)) {
+	else if ((skb_dst(skb) && skb_dst(skb)->dev) &&
+		 (!(skb_dst(skb)->dev->features & NETIF_F_V4_CSUM))) {
 		skb->ip_summed = CHECKSUM_COMPLETE;
 		csum = skb_checksum(skb, 0, udp_len, 0);
 		uh->check = csum_tcpudp_magic(inet->inet_saddr,
@@ -1661,6 +1664,7 @@ static int pppol2tp_connect(struct socket *sock, struct sockaddr *uservaddr,
 		if (tunnel_sock == NULL)
 			goto end;
 
+		sock_hold(tunnel_sock);
 		tunnel = tunnel_sock->sk_user_data;
 	} else {
 		tunnel = pppol2tp_tunnel_find(sock_net(sk), sp->pppol2tp.s_tunnel);
diff --git a/drivers/net/qlcnic/qlcnic.h b/drivers/net/qlcnic/qlcnic.h
index b40a851ec7d1..0da94b208db1 100644
--- a/drivers/net/qlcnic/qlcnic.h
+++ b/drivers/net/qlcnic/qlcnic.h
@@ -423,6 +423,11 @@ struct qlcnic_adapter_stats {
 	u64  lro_pkts;
 	u64  rxbytes;
 	u64  txbytes;
+	u64  lrobytes;
+	u64  lso_frames;
+	u64  xmit_on;
+	u64  xmit_off;
+	u64  skb_alloc_failure;
 };
 
 /*
@@ -1095,11 +1100,11 @@ struct qlcnic_brdinfo {
 
 static const struct qlcnic_brdinfo qlcnic_boards[] = {
 	{0x1077, 0x8020, 0x1077, 0x203,
-		"8200 Series Single Port 10GbE Converged Network Adapter \
-		(TCP/IP Networking)"},
+		"8200 Series Single Port 10GbE Converged Network Adapter "
+		"(TCP/IP Networking)"},
 	{0x1077, 0x8020, 0x1077, 0x207,
-		"8200 Series Dual Port 10GbE Converged Network Adapter \
-		(TCP/IP Networking)"},
+		"8200 Series Dual Port 10GbE Converged Network Adapter "
+		"(TCP/IP Networking)"},
 	{0x1077, 0x8020, 0x1077, 0x20b,
 		"3200 Series Dual Port 10Gb Intelligent Ethernet Adapter"},
 	{0x1077, 0x8020, 0x1077, 0x20c,
diff --git a/drivers/net/qlcnic/qlcnic_ethtool.c b/drivers/net/qlcnic/qlcnic_ethtool.c
index 8da6ec8c13b9..f83e15fe3e1b 100644
--- a/drivers/net/qlcnic/qlcnic_ethtool.c
+++ b/drivers/net/qlcnic/qlcnic_ethtool.c
@@ -59,6 +59,17 @@ static const struct qlcnic_stats qlcnic_gstrings_stats[] = {
 		QLC_SIZEOF(stats.rxbytes), QLC_OFF(stats.rxbytes)},
 	{"tx_bytes",
 		QLC_SIZEOF(stats.txbytes), QLC_OFF(stats.txbytes)},
+	{"lrobytes",
+		QLC_SIZEOF(stats.lrobytes), QLC_OFF(stats.lrobytes)},
+	{"lso_frames",
+		QLC_SIZEOF(stats.lso_frames), QLC_OFF(stats.lso_frames)},
+	{"xmit_on",
+		QLC_SIZEOF(stats.xmit_on), QLC_OFF(stats.xmit_on)},
+	{"xmit_off",
+		QLC_SIZEOF(stats.xmit_off), QLC_OFF(stats.xmit_off)},
+	{"skb_alloc_failure", QLC_SIZEOF(stats.skb_alloc_failure),
+		QLC_OFF(stats.skb_alloc_failure)},
+
 };
 
 #define QLCNIC_STATS_LEN	ARRAY_SIZE(qlcnic_gstrings_stats)
@@ -785,6 +796,11 @@ qlcnic_get_ethtool_stats(struct net_device *dev,
 	}
 }
 
+static u32 qlcnic_get_tx_csum(struct net_device *dev)
+{
+	return dev->features & NETIF_F_IP_CSUM;
+}
+
 static u32 qlcnic_get_rx_csum(struct net_device *dev)
 {
 	struct qlcnic_adapter *adapter = netdev_priv(dev);
@@ -995,6 +1011,7 @@ const struct ethtool_ops qlcnic_ethtool_ops = {
 	.set_ringparam = qlcnic_set_ringparam,
 	.get_pauseparam = qlcnic_get_pauseparam,
 	.set_pauseparam = qlcnic_set_pauseparam,
+	.get_tx_csum = qlcnic_get_tx_csum,
 	.set_tx_csum = ethtool_op_set_tx_csum,
 	.set_sg = ethtool_op_set_sg,
 	.get_tso = qlcnic_get_tso,
diff --git a/drivers/net/qlcnic/qlcnic_hw.c b/drivers/net/qlcnic/qlcnic_hw.c
index 99a4d1379d00..da00e162b6d3 100644
--- a/drivers/net/qlcnic/qlcnic_hw.c
+++ b/drivers/net/qlcnic/qlcnic_hw.c
@@ -349,6 +349,7 @@ qlcnic_send_cmd_descs(struct qlcnic_adapter *adapter,
 	if (nr_desc >= qlcnic_tx_avail(tx_ring)) {
 		netif_tx_stop_queue(tx_ring->txq);
 		__netif_tx_unlock_bh(tx_ring->txq);
+		adapter->stats.xmit_off++;
 		return -EBUSY;
 	}
 
@@ -397,20 +398,16 @@ qlcnic_sre_macaddr_change(struct qlcnic_adapter *adapter, u8 *addr,
 	return qlcnic_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
 }
 
-static int qlcnic_nic_add_mac(struct qlcnic_adapter *adapter,
-		u8 *addr, struct list_head *del_list)
+static int qlcnic_nic_add_mac(struct qlcnic_adapter *adapter, u8 *addr)
 {
 	struct list_head *head;
 	struct qlcnic_mac_list_s *cur;
 
 	/* look up if already exists */
-	list_for_each(head, del_list) {
+	list_for_each(head, &adapter->mac_list) {
 		cur = list_entry(head, struct qlcnic_mac_list_s, list);
-
-		if (memcmp(addr, cur->mac_addr, ETH_ALEN) == 0) {
-			list_move_tail(head, &adapter->mac_list);
+		if (memcmp(addr, cur->mac_addr, ETH_ALEN) == 0)
 			return 0;
-		}
 	}
 
 	cur = kzalloc(sizeof(struct qlcnic_mac_list_s), GFP_ATOMIC);
@@ -432,14 +429,9 @@ void qlcnic_set_multi(struct net_device *netdev)
 	struct dev_mc_list *mc_ptr;
 	u8 bcast_addr[ETH_ALEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
 	u32 mode = VPORT_MISS_MODE_DROP;
-	LIST_HEAD(del_list);
-	struct list_head *head;
-	struct qlcnic_mac_list_s *cur;
 
-	list_splice_tail_init(&adapter->mac_list, &del_list);
-
-	qlcnic_nic_add_mac(adapter, adapter->mac_addr, &del_list);
-	qlcnic_nic_add_mac(adapter, bcast_addr, &del_list);
+	qlcnic_nic_add_mac(adapter, adapter->mac_addr);
+	qlcnic_nic_add_mac(adapter, bcast_addr);
 
 	if (netdev->flags & IFF_PROMISC) {
 		mode = VPORT_MISS_MODE_ACCEPT_ALL;
@@ -454,22 +446,12 @@ void qlcnic_set_multi(struct net_device *netdev)
 
 	if (!netdev_mc_empty(netdev)) {
 		netdev_for_each_mc_addr(mc_ptr, netdev) {
-			qlcnic_nic_add_mac(adapter, mc_ptr->dmi_addr,
-							&del_list);
+			qlcnic_nic_add_mac(adapter, mc_ptr->dmi_addr);
 		}
 	}
 
 send_fw_cmd:
 	qlcnic_nic_set_promisc(adapter, mode);
-	head = &del_list;
-	while (!list_empty(head)) {
-		cur = list_entry(head->next, struct qlcnic_mac_list_s, list);
-
-		qlcnic_sre_macaddr_change(adapter,
-				cur->mac_addr, QLCNIC_MAC_DEL);
-		list_del(&cur->list);
-		kfree(cur);
-	}
 }
 
 int qlcnic_nic_set_promisc(struct qlcnic_adapter *adapter, u32 mode)
diff --git a/drivers/net/qlcnic/qlcnic_init.c b/drivers/net/qlcnic/qlcnic_init.c
index ea00ab4d4feb..7c34e4e29b3f 100644
--- a/drivers/net/qlcnic/qlcnic_init.c
+++ b/drivers/net/qlcnic/qlcnic_init.c
@@ -568,21 +568,123 @@ struct uni_table_desc *qlcnic_get_table_desc(const u8 *unirom, int section)
 	return NULL;
 }
 
+#define FILEHEADER_SIZE (14 * 4)
+
 static int
-qlcnic_set_product_offs(struct qlcnic_adapter *adapter)
+qlcnic_validate_header(struct qlcnic_adapter *adapter)
 {
-	struct uni_table_desc *ptab_descr;
 	const u8 *unirom = adapter->fw->data;
-	u32 i;
+	struct uni_table_desc *directory = (struct uni_table_desc *) &unirom[0];
+	__le32 fw_file_size = adapter->fw->size;
 	__le32 entries;
+	__le32 entry_size;
+	__le32 tab_size;
+
+	if (fw_file_size < FILEHEADER_SIZE)
+		return -EINVAL;
+
+	entries = cpu_to_le32(directory->num_entries);
+	entry_size = cpu_to_le32(directory->entry_size);
+	tab_size = cpu_to_le32(directory->findex) + (entries * entry_size);
+
+	if (fw_file_size < tab_size)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int
+qlcnic_validate_bootld(struct qlcnic_adapter *adapter)
+{
+	struct uni_table_desc *tab_desc;
+	struct uni_data_desc *descr;
+	const u8 *unirom = adapter->fw->data;
+	int idx = cpu_to_le32(*((int *)&unirom[adapter->file_prd_off] +
+				QLCNIC_UNI_BOOTLD_IDX_OFF));
+	__le32 offs;
+	__le32 tab_size;
+	__le32 data_size;
+
+	tab_desc = qlcnic_get_table_desc(unirom, QLCNIC_UNI_DIR_SECT_BOOTLD);
+
+	if (!tab_desc)
+		return -EINVAL;
+
+	tab_size = cpu_to_le32(tab_desc->findex) +
+			(cpu_to_le32(tab_desc->entry_size * (idx + 1)));
+
+	if (adapter->fw->size < tab_size)
+		return -EINVAL;
+
+	offs = cpu_to_le32(tab_desc->findex) +
+		(cpu_to_le32(tab_desc->entry_size) * (idx));
+	descr = (struct uni_data_desc *)&unirom[offs];
+
+	data_size = descr->findex + cpu_to_le32(descr->size);
+
+	if (adapter->fw->size < data_size)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int
+qlcnic_validate_fw(struct qlcnic_adapter *adapter)
+{
+	struct uni_table_desc *tab_desc;
+	struct uni_data_desc *descr;
+	const u8 *unirom = adapter->fw->data;
+	int idx = cpu_to_le32(*((int *)&unirom[adapter->file_prd_off] +
+				QLCNIC_UNI_FIRMWARE_IDX_OFF));
+	__le32 offs;
+	__le32 tab_size;
+	__le32 data_size;
+
+	tab_desc = qlcnic_get_table_desc(unirom, QLCNIC_UNI_DIR_SECT_FW);
+
+	if (!tab_desc)
+		return -EINVAL;
+
+	tab_size = cpu_to_le32(tab_desc->findex) +
+			(cpu_to_le32(tab_desc->entry_size * (idx + 1)));
+
+	if (adapter->fw->size < tab_size)
+		return -EINVAL;
+
+	offs = cpu_to_le32(tab_desc->findex) +
+		(cpu_to_le32(tab_desc->entry_size) * (idx));
+	descr = (struct uni_data_desc *)&unirom[offs];
+	data_size = descr->findex + cpu_to_le32(descr->size);
+
+	if (adapter->fw->size < data_size)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int
+qlcnic_validate_product_offs(struct qlcnic_adapter *adapter)
+{
+	struct uni_table_desc *ptab_descr;
+	const u8 *unirom = adapter->fw->data;
 	int mn_present = qlcnic_has_mn(adapter);
+	__le32 entries;
+	__le32 entry_size;
+	__le32 tab_size;
+	u32 i;
 
 	ptab_descr = qlcnic_get_table_desc(unirom,
 				QLCNIC_UNI_DIR_SECT_PRODUCT_TBL);
-	if (ptab_descr == NULL)
-		return -1;
+	if (!ptab_descr)
+		return -EINVAL;
 
 	entries = cpu_to_le32(ptab_descr->num_entries);
+	entry_size = cpu_to_le32(ptab_descr->entry_size);
+	tab_size = cpu_to_le32(ptab_descr->findex) + (entries * entry_size);
+
+	if (adapter->fw->size < tab_size)
+		return -EINVAL;
+
 nomn:
 	for (i = 0; i < entries; i++) {
 
@@ -609,7 +711,37 @@ nomn:
 		mn_present = 0;
 		goto nomn;
 	}
-	return -1;
+	return -EINVAL;
+}
+
+static int
+qlcnic_validate_unified_romimage(struct qlcnic_adapter *adapter)
+{
+	if (qlcnic_validate_header(adapter)) {
+		dev_err(&adapter->pdev->dev,
+				"unified image: header validation failed\n");
+		return -EINVAL;
+	}
+
+	if (qlcnic_validate_product_offs(adapter)) {
+		dev_err(&adapter->pdev->dev,
+				"unified image: product validation failed\n");
+		return -EINVAL;
+	}
+
+	if (qlcnic_validate_bootld(adapter)) {
+		dev_err(&adapter->pdev->dev,
+				"unified image: bootld validation failed\n");
+		return -EINVAL;
+	}
+
+	if (qlcnic_validate_fw(adapter)) {
+		dev_err(&adapter->pdev->dev,
+				"unified image: firmware validation failed\n");
+		return -EINVAL;
+	}
+
+	return 0;
 }
 
 static
@@ -715,7 +847,7 @@ qlcnic_get_bios_version(struct qlcnic_adapter *adapter)
 	bios_ver = cpu_to_le32(*((u32 *) (&fw->data[prd_off])
 				+ QLCNIC_UNI_BIOS_VERSION_OFF));
 
-	return (bios_ver << 24) + ((bios_ver >> 8) & 0xff00) + (bios_ver >> 24);
+	return (bios_ver << 16) + ((bios_ver >> 8) & 0xff00) + (bios_ver >> 24);
 }
 
 int
@@ -858,7 +990,7 @@ qlcnic_validate_firmware(struct qlcnic_adapter *adapter)
 	u8 fw_type = adapter->fw_type;
 
 	if (fw_type == QLCNIC_UNIFIED_ROMIMAGE) {
-		if (qlcnic_set_product_offs(adapter))
+		if (qlcnic_validate_unified_romimage(adapter))
 			return -EINVAL;
 
 		min_size = QLCNIC_UNI_FW_MIN_SIZE;
@@ -1114,8 +1246,10 @@ qlcnic_alloc_rx_skb(struct qlcnic_adapter *adapter,
 	struct pci_dev *pdev = adapter->pdev;
 
 	buffer->skb = dev_alloc_skb(rds_ring->skb_size);
-	if (!buffer->skb)
+	if (!buffer->skb) {
+		adapter->stats.skb_alloc_failure++;
 		return -ENOMEM;
+	}
 
 	skb = buffer->skb;
 
@@ -1289,7 +1423,7 @@ qlcnic_process_lro(struct qlcnic_adapter *adapter,
 	netif_receive_skb(skb);
 
 	adapter->stats.lro_pkts++;
-	adapter->stats.rxbytes += length;
+	adapter->stats.lrobytes += length;
 
 	return buffer;
 }
@@ -1505,6 +1639,8 @@ qlcnic_process_rcv_diag(struct qlcnic_adapter *adapter,
 		adapter->diag_cnt++;
 
 	dev_kfree_skb_any(skb);
+	adapter->stats.rx_pkts++;
+	adapter->stats.rxbytes += length;
 
 	return buffer;
 }
diff --git a/drivers/net/qlcnic/qlcnic_main.c b/drivers/net/qlcnic/qlcnic_main.c
index 665e8e56b6a8..fc721564e69e 100644
--- a/drivers/net/qlcnic/qlcnic_main.c
+++ b/drivers/net/qlcnic/qlcnic_main.c
@@ -118,6 +118,7 @@ qlcnic_update_cmd_producer(struct qlcnic_adapter *adapter,
 	if (qlcnic_tx_avail(tx_ring) <= TX_STOP_THRESH) {
 		netif_stop_queue(adapter->netdev);
 		smp_mb();
+		adapter->stats.xmit_off++;
 	}
 }
 
@@ -1385,6 +1386,7 @@ qlcnic_tso_check(struct net_device *netdev,
 	int copied, offset, copy_len, hdr_len = 0, tso = 0, vlan_oob = 0;
 	struct cmd_desc_type0 *hwdesc;
 	struct vlan_ethhdr *vh;
+	struct qlcnic_adapter *adapter = netdev_priv(netdev);
 
 	if (protocol == cpu_to_be16(ETH_P_8021Q)) {
 
@@ -1494,6 +1496,7 @@ qlcnic_tso_check(struct net_device *netdev,
 
 	tx_ring->producer = producer;
 	barrier();
+	adapter->stats.lso_frames++;
 }
 
 static int
@@ -1573,6 +1576,7 @@ qlcnic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 
 	if (unlikely(no_of_desc + 2 > qlcnic_tx_avail(tx_ring))) {
 		netif_stop_queue(netdev);
+		adapter->stats.xmit_off++;
 		return NETDEV_TX_BUSY;
 	}
 
@@ -1880,6 +1884,7 @@ static int qlcnic_process_cmd_ring(struct qlcnic_adapter *adapter)
 			if (qlcnic_tx_avail(tx_ring) > TX_STOP_THRESH) {
 				netif_wake_queue(netdev);
 				adapter->tx_timeo_cnt = 0;
+				adapter->stats.xmit_on++;
 			}
 			__netif_tx_unlock(tx_ring->txq);
 		}
diff --git a/drivers/net/qlge/qlge_ethtool.c b/drivers/net/qlge/qlge_ethtool.c
index 05b8bde9980d..7dbff87480dc 100644
--- a/drivers/net/qlge/qlge_ethtool.c
+++ b/drivers/net/qlge/qlge_ethtool.c
@@ -405,7 +405,7 @@ static int ql_set_wol(struct net_device *ndev, struct ethtool_wolinfo *wol)
 		u32 wol = 0;
 		status = ql_mb_wol_mode(qdev, wol);
 		netif_err(qdev, drv, qdev->ndev, "WOL %s (wol code 0x%x)\n",
-			  status == 0 ? "cleared sucessfully" : "clear failed",
+			  status == 0 ? "cleared successfully" : "clear failed",
 			  wol);
 	}
 
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index c26ec5d740f6..fd34f266c0a8 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -3855,7 +3855,7 @@ int ql_wol(struct ql_adapter *qdev)
 		status = ql_mb_wol_mode(qdev, wol);
 		netif_err(qdev, drv, qdev->ndev,
 			  "WOL %s (wol code 0x%x) on %s\n",
-			  (status == 0) ? "Sucessfully set" : "Failed",
+			  (status == 0) ? "Successfully set" : "Failed",
 			  wol, qdev->ndev->name);
 	}
 
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index dfc3573c91bb..9d3ebf3e975e 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -4270,7 +4270,7 @@ static netdev_tx_t rtl8169_start_xmit(struct sk_buff *skb,
 
 	tp->cur_tx += frags + 1;
 
-	smp_wmb();
+	wmb();
 
 	RTL_W8(TxPoll, NPQ);	/* set polling bit */
 
@@ -4621,7 +4621,7 @@ static int rtl8169_poll(struct napi_struct *napi, int budget)
 		 * until it does.
 		 */
 		tp->intr_mask = 0xffff;
-		smp_wmb();
+		wmb();
 		RTL_W16(IntrMask, tp->intr_event);
 	}
 
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 43bc66aa8405..2eb7f8a0d926 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -923,8 +923,8 @@ static int init_shared_mem(struct s2io_nic *nic)
 	tmp_v_addr = mac_control->stats_mem;
 	mac_control->stats_info = (struct stat_block *)tmp_v_addr;
 	memset(tmp_v_addr, 0, size);
-	DBG_PRINT(INIT_DBG, "%s: Ring Mem PHY: 0x%llx\n", dev->name,
-		  (unsigned long long)tmp_p_addr);
+	DBG_PRINT(INIT_DBG, "%s: Ring Mem PHY: 0x%llx\n",
+		dev_name(&nic->pdev->dev), (unsigned long long)tmp_p_addr);
 	mac_control->stats_info->sw_stat.mem_allocated += mem_allocated;
 	return SUCCESS;
 }
@@ -3480,7 +3480,7 @@ static void s2io_reset(struct s2io_nic *sp)
 	struct swStat *swstats;
 
 	DBG_PRINT(INIT_DBG, "%s: Resetting XFrame card %s\n",
-		  __func__, sp->dev->name);
+		  __func__, pci_name(sp->pdev));
 
 	/* Back up  the PCI-X CMD reg, dont want to lose MMRBC, OST settings */
 	pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER, &(pci_cmd));
@@ -5819,10 +5819,8 @@ static void s2io_vpd_read(struct s2io_nic *nic)
 		}
 	}
 
-	if ((!fail) && (vpd_data[1] < VPD_STRING_LEN)) {
-		memset(nic->product_name, 0, vpd_data[1]);
+	if ((!fail) && (vpd_data[1] < VPD_STRING_LEN))
 		memcpy(nic->product_name, &vpd_data[3], vpd_data[1]);
-	}
 	kfree(vpd_data);
 	swstats->mem_freed += 256;
 }
diff --git a/drivers/net/sfc/regs.h b/drivers/net/sfc/regs.h
index 89d606fe9248..18a3be428348 100644
--- a/drivers/net/sfc/regs.h
+++ b/drivers/net/sfc/regs.h
@@ -95,7 +95,7 @@
 #define	FRF_AA_INT_ACK_KER_FIELD_LBN 0
 #define	FRF_AA_INT_ACK_KER_FIELD_WIDTH 32
 
-/* INT_ISR0_REG: Function 0 Interrupt Acknowlege Status register */
+/* INT_ISR0_REG: Function 0 Interrupt Acknowledge Status register */
 #define	FR_BZ_INT_ISR0 0x00000090
 #define	FRF_BZ_INT_ISR_REG_LBN 0
 #define	FRF_BZ_INT_ISR_REG_WIDTH 64
diff --git a/drivers/net/skfp/ess.c b/drivers/net/skfp/ess.c
index a85efcfd9d0e..e8387d25f24a 100644
--- a/drivers/net/skfp/ess.c
+++ b/drivers/net/skfp/ess.c
@@ -557,7 +557,7 @@ static void ess_send_alc_req(struct s_smc *smc)
 
 	/*
 	 * send never allocation request where the requested payload and
-	 * overhead is zero or deallocate bandwidht when no bandwidth is
+	 * overhead is zero or deallocate bandwidth when no bandwidth is
 	 * parsed
 	 */
 	if (!smc->mib.fddiESSPayload) {
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 653bdd76ef46..d8ec4c11fd49 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -4863,6 +4863,7 @@ static int sky2_resume(struct pci_dev *pdev)
 	if (!hw)
 		return 0;
 
+	rtnl_lock();
 	err = pci_set_power_state(pdev, PCI_D0);
 	if (err)
 		goto out;
@@ -4884,7 +4885,6 @@ static int sky2_resume(struct pci_dev *pdev)
 	sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
 	napi_enable(&hw->napi);
 
-	rtnl_lock();
 	for (i = 0; i < hw->ports; i++) {
 		err = sky2_reattach(hw->dev[i]);
 		if (err)
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 54799544bda3..8d2772cc42f2 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -330,6 +330,48 @@ static inline void LPD7_SMC_outsw (unsigned char* a, int r,
 
 #include <unit/smc91111.h>
 
+#elif defined(CONFIG_ARCH_MSM)
+
+#define SMC_CAN_USE_8BIT	0
+#define SMC_CAN_USE_16BIT	1
+#define SMC_CAN_USE_32BIT	0
+#define SMC_NOWAIT		1
+
+#define SMC_inw(a, r)		readw((a) + (r))
+#define SMC_outw(v, a, r)	writew(v, (a) + (r))
+#define SMC_insw(a, r, p, l)	readsw((a) + (r), p, l)
+#define SMC_outsw(a, r, p, l)	writesw((a) + (r), p, l)
+
+#define SMC_IRQ_FLAGS		IRQF_TRIGGER_HIGH
+
+#elif defined(CONFIG_COLDFIRE)
+
+#define SMC_CAN_USE_8BIT	0
+#define SMC_CAN_USE_16BIT	1
+#define SMC_CAN_USE_32BIT	0
+#define SMC_NOWAIT		1
+
+static inline void mcf_insw(void *a, unsigned char *p, int l)
+{
+	u16 *wp = (u16 *) p;
+	while (l-- > 0)
+		*wp++ = readw(a);
+}
+
+static inline void mcf_outsw(void *a, unsigned char *p, int l)
+{
+	u16 *wp = (u16 *) p;
+	while (l-- > 0)
+		writew(*wp++, a);
+}
+
+#define SMC_inw(a, r)		_swapw(readw((a) + (r)))
+#define SMC_outw(v, a, r)	writew(_swapw(v), (a) + (r))
+#define SMC_insw(a, r, p, l)	mcf_insw(a + r, p, l)
+#define SMC_outsw(a, r, p, l)	mcf_outsw(a + r, p, l)
+
+#define SMC_IRQ_FLAGS		(IRQF_DISABLED)
+
 #else
 
 /*
diff --git a/drivers/net/smsc9420.c b/drivers/net/smsc9420.c
index 30110a11d737..34fa10d8ad40 100644
--- a/drivers/net/smsc9420.c
+++ b/drivers/net/smsc9420.c
@@ -1347,7 +1347,7 @@ static int smsc9420_open(struct net_device *dev)
 
 	netif_carrier_off(dev);
 
-	/* disable, mask and acknowlege all interrupts */
+	/* disable, mask and acknowledge all interrupts */
 	spin_lock_irqsave(&pd->int_lock, flags);
 	int_cfg = smsc9420_reg_read(pd, INT_CFG) & (~INT_CFG_IRQ_EN_);
 	smsc9420_reg_write(pd, INT_CFG, int_cfg);
diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c
index 2f8a8c32021e..5ba9d989f8fc 100644
--- a/drivers/net/spider_net.c
+++ b/drivers/net/spider_net.c
@@ -474,7 +474,7 @@ spider_net_prepare_rx_descr(struct spider_net_card *card,
  * spider_net_enable_rxchtails - sets RX dmac chain tail addresses
  * @card: card structure
  *
- * spider_net_enable_rxchtails sets the RX DMAC chain tail adresses in the
+ * spider_net_enable_rxchtails sets the RX DMAC chain tail addresses in the
  * chip by writing to the appropriate register. DMA is enabled in
  * spider_net_enable_rxdmac.
  */
@@ -1820,7 +1820,7 @@ spider_net_enable_card(struct spider_net_card *card)
 
 	spider_net_write_reg(card, SPIDER_NET_ECMODE, SPIDER_NET_ECMODE_VALUE);
 
-	/* set chain tail adress for RX chains and
+	/* set chain tail address for RX chains and
 	 * enable DMA */
 	spider_net_enable_rxchtails(card);
 	spider_net_enable_rxdmac(card);
diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c
index 4344017bfaef..70196bc5fe61 100644
--- a/drivers/net/sungem.c
+++ b/drivers/net/sungem.c
@@ -782,7 +782,7 @@ static int gem_rx(struct gem *gp, int work_to_do)
 			break;
 
 		/* When writing back RX descriptor, GEM writes status
-		 * then buffer address, possibly in seperate transactions.
+		 * then buffer address, possibly in separate transactions.
 		 * If we don't wait for the chip to write both, we could
 		 * post a new buffer to this descriptor then have GEM spam
 		 * on the buffer address.  We sync on the RX completion
diff --git a/drivers/net/tehuti.c b/drivers/net/tehuti.c
index 0c9780217c87..f5493092521a 100644
--- a/drivers/net/tehuti.c
+++ b/drivers/net/tehuti.c
@@ -1851,7 +1851,7 @@ static void bdx_tx_push_desc(struct bdx_priv *priv, void *data, int size)
  * @data - desc's data
  * @size - desc's size
  *
- * NOTE: this func does check for available space and, if neccessary, waits for
+ * NOTE: this func does check for available space and, if necessary, waits for
  *   NIC to read existing data before writing new one.
  */
 static void bdx_tx_push_desc_safe(struct bdx_priv *priv, void *data, int size)
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 0fa7688ab483..22cf1c446de3 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -5279,7 +5279,7 @@ static void tg3_poll_controller(struct net_device *dev)
 	struct tg3 *tp = netdev_priv(dev);
 
 	for (i = 0; i < tp->irq_cnt; i++)
-		tg3_interrupt(tp->napi[i].irq_vec, dev);
+		tg3_interrupt(tp->napi[i].irq_vec, &tp->napi[i]);
 }
 #endif
 
@@ -9776,7 +9776,7 @@ static int tg3_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 			   ADVERTISED_Pause |
 			   ADVERTISED_Asym_Pause;
 
-		if (!(tp->tg3_flags2 & TG3_FLAG_10_100_ONLY))
+		if (!(tp->tg3_flags & TG3_FLAG_10_100_ONLY))
 			mask |= ADVERTISED_1000baseT_Half |
 				ADVERTISED_1000baseT_Full;
 
diff --git a/drivers/net/tokenring/tms380tr.c b/drivers/net/tokenring/tms380tr.c
index 21a01753312a..ee71bcfb3753 100644
--- a/drivers/net/tokenring/tms380tr.c
+++ b/drivers/net/tokenring/tms380tr.c
@@ -693,7 +693,7 @@ static netdev_tx_t tms380tr_hardware_send_packet(struct sk_buff *skb,
  * NOTE: This function should be used whenever the status of any TPL must be
  * modified by the driver, because the compiler may otherwise change the
  * order of instructions such that writing the TPL status may be executed at
- * an undesireable time. When this function is used, the status is always
+ * an undesirable time. When this function is used, the status is always
  * written when the function is called.
  */
 static void tms380tr_write_tpl_status(TPL *tpl, unsigned int Status)
@@ -2264,7 +2264,7 @@ static void tms380tr_rcv_status_irq(struct net_device *dev)
  * This function should be used whenever the status of any RPL must be
  * modified by the driver, because the compiler may otherwise change the
  * order of instructions such that writing the RPL status may be executed
- * at an undesireable time. When this function is used, the status is
+ * at an undesirable time. When this function is used, the status is
  * always written when the function is called.
  */
 static void tms380tr_write_rpl_status(RPL *rpl, unsigned int Status)
diff --git a/drivers/net/tulip/eeprom.c b/drivers/net/tulip/eeprom.c
index 93f4e8309f81..49f05d1431f5 100644
--- a/drivers/net/tulip/eeprom.c
+++ b/drivers/net/tulip/eeprom.c
@@ -143,6 +143,12 @@ static void __devinit tulip_build_fake_mediatable(struct tulip_private *tp)
 
 void __devinit tulip_parse_eeprom(struct net_device *dev)
 {
+	/*
+	  dev is not registered at this point, so logging messages can't
+	  use dev_<level> or netdev_<level> but dev->name is good via a
+	  hack in the caller
+	*/
+
 	/* The last media info list parsed, for multiport boards.  */
 	static struct mediatable *last_mediatable;
 	static unsigned char *last_ee_data;
@@ -161,15 +167,14 @@ void __devinit tulip_parse_eeprom(struct net_device *dev)
 		if (ee_data[0] == 0xff) {
 			if (last_mediatable) {
 				controller_index++;
-				dev_info(&dev->dev,
-					 "Controller %d of multiport board\n",
-					 controller_index);
+				pr_info("%s: Controller %d of multiport board\n",
+					dev->name, controller_index);
 				tp->mtable = last_mediatable;
 				ee_data = last_ee_data;
 				goto subsequent_board;
 			} else
-				dev_info(&dev->dev,
-					 "Missing EEPROM, this interface may not work correctly!\n");
+				pr_info("%s: Missing EEPROM, this interface may not work correctly!\n",
+					dev->name);
 			return;
 		}
 	  /* Do a fix-up based on the vendor half of the station address prefix. */
@@ -181,15 +186,14 @@ void __devinit tulip_parse_eeprom(struct net_device *dev)
 			  i++;			/* An Accton EN1207, not an outlaw Maxtech. */
 		  memcpy(ee_data + 26, eeprom_fixups[i].newtable,
 				 sizeof(eeprom_fixups[i].newtable));
-		  dev_info(&dev->dev,
-			   "Old format EEPROM on '%s' board.  Using substitute media control info\n",
-			   eeprom_fixups[i].name);
+		  pr_info("%s: Old format EEPROM on '%s' board.  Using substitute media control info\n",
+			  dev->name, eeprom_fixups[i].name);
 		  break;
 		}
 	  }
 	  if (eeprom_fixups[i].name == NULL) { /* No fixup found. */
-		  dev_info(&dev->dev,
-			   "Old style EEPROM with no media selection information\n");
+		  pr_info("%s: Old style EEPROM with no media selection information\n",
+			  dev->name);
 		return;
 	  }
 	}
@@ -217,8 +221,8 @@ subsequent_board:
 	        /* there is no phy information, don't even try to build mtable */
 	        if (count == 0) {
 			if (tulip_debug > 0)
-				dev_warn(&dev->dev,
-					 "no phy info, aborting mtable build\n");
+				pr_warning("%s: no phy info, aborting mtable build\n",
+					   dev->name);
 		        return;
 		}
 
@@ -234,8 +238,10 @@ subsequent_board:
 		mtable->has_nonmii = mtable->has_mii = mtable->has_reset = 0;
 		mtable->csr15dir = mtable->csr15val = 0;
 
-		dev_info(&dev->dev, "EEPROM default media type %s\n",
-			 media & 0x0800 ? "Autosense" : medianame[media & MEDIA_MASK]);
+		pr_info("%s: EEPROM default media type %s\n",
+			dev->name,
+			media & 0x0800 ? "Autosense"
+				       : medianame[media & MEDIA_MASK]);
 		for (i = 0; i < count; i++) {
 			struct medialeaf *leaf = &mtable->mleaf[i];
 
@@ -298,17 +304,17 @@ subsequent_board:
 			}
 			if (tulip_debug > 1  &&  leaf->media == 11) {
 				unsigned char *bp = leaf->leafdata;
-				dev_info(&dev->dev,
-					 "MII interface PHY %d, setup/reset sequences %d/%d long, capabilities %02x %02x\n",
-					 bp[0], bp[1], bp[2 + bp[1]*2],
-					 bp[5 + bp[2 + bp[1]*2]*2],
-					 bp[4 + bp[2 + bp[1]*2]*2]);
+				pr_info("%s: MII interface PHY %d, setup/reset sequences %d/%d long, capabilities %02x %02x\n",
+					dev->name,
+					bp[0], bp[1], bp[2 + bp[1]*2],
+					bp[5 + bp[2 + bp[1]*2]*2],
+					bp[4 + bp[2 + bp[1]*2]*2]);
 			}
-			dev_info(&dev->dev,
-				 "Index #%d - Media %s (#%d) described by a %s (%d) block\n",
-				 i, medianame[leaf->media & 15], leaf->media,
-				 leaf->type < ARRAY_SIZE(block_name) ? block_name[leaf->type] : "<unknown>",
-				 leaf->type);
+			pr_info("%s: Index #%d - Media %s (#%d) described by a %s (%d) block\n",
+				dev->name,
+				i, medianame[leaf->media & 15], leaf->media,
+				leaf->type < ARRAY_SIZE(block_name) ? block_name[leaf->type] : "<unknown>",
+				leaf->type);
 		}
 		if (new_advertise)
 			tp->sym_advertise = new_advertise;
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index ce1efa4c0b0d..96c39bddc78c 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -1437,7 +1437,7 @@ static int tun_chr_close(struct inode *inode, struct file *file)
 
 		__tun_detach(tun);
 
-		/* If desireable, unregister the netdevice. */
+		/* If desirable, unregister the netdevice. */
 		if (!(tun->flags & TUN_PERSIST)) {
 			rtnl_lock();
 			if (dev->reg_state == NETREG_REGISTERED)
diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c
index e3ddcb8f29df..cd24e5f2b2a2 100644
--- a/drivers/net/typhoon.c
+++ b/drivers/net/typhoon.c
@@ -480,7 +480,7 @@ typhoon_hello(struct typhoon *tp)
 		typhoon_inc_cmd_index(&ring->lastWrite, 1);
 
 		INIT_COMMAND_NO_RESPONSE(cmd, TYPHOON_CMD_HELLO_RESP);
-		smp_wmb();
+		wmb();
 		iowrite32(ring->lastWrite, tp->ioaddr + TYPHOON_REG_CMD_READY);
 		spin_unlock(&tp->command_lock);
 	}
@@ -1311,13 +1311,15 @@ typhoon_init_interface(struct typhoon *tp)
 
 	tp->txlo_dma_addr = le32_to_cpu(iface->txLoAddr);
 	tp->card_state = Sleeping;
-	smp_wmb();
 
 	tp->offload = TYPHOON_OFFLOAD_IP_CHKSUM | TYPHOON_OFFLOAD_TCP_CHKSUM;
 	tp->offload |= TYPHOON_OFFLOAD_UDP_CHKSUM | TSO_OFFLOAD_ON;
 
 	spin_lock_init(&tp->command_lock);
 	spin_lock_init(&tp->state_lock);
+
+	/* Force the writes to the shared memory area out before continuing. */
+	wmb();
 }
 
 static void
@@ -2096,7 +2098,7 @@ typhoon_tx_timeout(struct net_device *dev)
 
 	if(typhoon_reset(tp->ioaddr, WaitNoSleep) < 0) {
 		netdev_warn(dev, "could not reset in tx timeout\n");
-		goto truely_dead;
+		goto truly_dead;
 	}
 
 	/* If we ever start using the Hi ring, it will need cleaning too */
@@ -2105,13 +2107,13 @@ typhoon_tx_timeout(struct net_device *dev)
 
 	if(typhoon_start_runtime(tp) < 0) {
 		netdev_err(dev, "could not start runtime in tx timeout\n");
-		goto truely_dead;
+		goto truly_dead;
         }
 
 	netif_wake_queue(dev);
 	return;
 
-truely_dead:
+truly_dead:
 	/* Reset the hardware, and turn off carrier to avoid more timeouts */
 	typhoon_reset(tp->ioaddr, NoWait);
 	netif_carrier_off(dev);
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 23a97518bc1f..1b0aef37e495 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -430,7 +430,7 @@ static void hw_add_addr_in_hash(struct ucc_geth_private *ugeth,
 	    ucc_fast_get_qe_cr_subblock(ugeth->ug_info->uf_info.ucc_num);
 
 	/* Ethernet frames are defined in Little Endian mode,
-	therefor to insert */
+	therefore to insert */
 	/* the address to the hash (Big Endian mode), we reverse the bytes.*/
 
 	set_mac_addr(&p_82xx_addr_filt->taddr.h, p_enet_addr);
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index 32d93564a74d..ba56ce4382d9 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -204,6 +204,14 @@ config USB_NET_DM9601
 	  This option adds support for Davicom DM9601 based USB 1.1
 	  10/100 Ethernet adapters.
 
+config USB_NET_SMSC75XX
+	tristate "SMSC LAN75XX based USB 2.0 gigabit ethernet devices"
+	depends on USB_USBNET
+	select CRC32
+	help
+	  This option adds support for SMSC LAN95XX based USB 2.0
+	  Gigabit Ethernet adapters.
+
 config USB_NET_SMSC95XX
 	tristate "SMSC LAN95XX based USB 2.0 10/100 ethernet devices"
 	depends on USB_USBNET
diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile
index e17afb78f372..82ea62955b56 100644
--- a/drivers/net/usb/Makefile
+++ b/drivers/net/usb/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_USB_NET_AX8817X)	+= asix.o
 obj-$(CONFIG_USB_NET_CDCETHER)	+= cdc_ether.o
 obj-$(CONFIG_USB_NET_CDC_EEM)	+= cdc_eem.o
 obj-$(CONFIG_USB_NET_DM9601)	+= dm9601.o
+obj-$(CONFIG_USB_NET_SMSC75XX)	+= smsc75xx.o
 obj-$(CONFIG_USB_NET_SMSC95XX)	+= smsc95xx.o
 obj-$(CONFIG_USB_NET_GL620A)	+= gl620a.o
 obj-$(CONFIG_USB_NET_NET1080)	+= net1080.o
diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c
index 20e34608fa4a..9e05639435f2 100644
--- a/drivers/net/usb/asix.c
+++ b/drivers/net/usb/asix.c
@@ -54,6 +54,7 @@ static const char driver_name [] = "asix";
 #define AX_CMD_WRITE_IPG0		0x12
 #define AX_CMD_WRITE_IPG1		0x13
 #define AX_CMD_READ_NODE_ID		0x13
+#define AX_CMD_WRITE_NODE_ID		0x14
 #define AX_CMD_WRITE_IPG2		0x14
 #define AX_CMD_WRITE_MULTI_FILTER	0x16
 #define AX88172_CMD_READ_NODE_ID	0x17
@@ -165,6 +166,7 @@ static const char driver_name [] = "asix";
 /* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */
 struct asix_data {
 	u8 multi_filter[AX_MCAST_FILTER_SIZE];
+	u8 mac_addr[ETH_ALEN];
 	u8 phymode;
 	u8 ledmode;
 	u8 eeprom_len;
@@ -732,6 +734,30 @@ static int asix_ioctl (struct net_device *net, struct ifreq *rq, int cmd)
 	return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
 }
 
+static int asix_set_mac_address(struct net_device *net, void *p)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct asix_data *data = (struct asix_data *)&dev->data;
+	struct sockaddr *addr = p;
+
+	if (netif_running(net))
+		return -EBUSY;
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EADDRNOTAVAIL;
+
+	memcpy(net->dev_addr, addr->sa_data, ETH_ALEN);
+
+	/* We use the 20 byte dev->data
+	 * for our 6 byte mac buffer
+	 * to avoid allocating memory that
+	 * is tricky to free later */
+	memcpy(data->mac_addr, addr->sa_data, ETH_ALEN);
+	asix_write_cmd_async(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
+							data->mac_addr);
+
+	return 0;
+}
+
 /* We need to override some ethtool_ops so we require our
    own structure so we don't interfere with other usbnet
    devices that may be connected at the same time. */
@@ -919,7 +945,7 @@ static const struct net_device_ops ax88772_netdev_ops = {
 	.ndo_start_xmit		= usbnet_start_xmit,
 	.ndo_tx_timeout		= usbnet_tx_timeout,
 	.ndo_change_mtu		= usbnet_change_mtu,
-	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_set_mac_address 	= asix_set_mac_address,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_do_ioctl		= asix_ioctl,
 	.ndo_set_multicast_list = asix_set_multicast,
@@ -1213,7 +1239,7 @@ static const struct net_device_ops ax88178_netdev_ops = {
 	.ndo_stop		= usbnet_stop,
 	.ndo_start_xmit		= usbnet_start_xmit,
 	.ndo_tx_timeout		= usbnet_tx_timeout,
-	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_set_mac_address 	= asix_set_mac_address,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_multicast_list = asix_set_multicast,
 	.ndo_do_ioctl 		= asix_ioctl,
diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index 6895f1531238..be0cc99e881a 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -1155,9 +1155,6 @@ static void _hso_serial_set_termios(struct tty_struct *tty,
 static void hso_resubmit_rx_bulk_urb(struct hso_serial *serial, struct urb *urb)
 {
 	int result;
-#ifdef CONFIG_HSO_AUTOPM
-	usb_mark_last_busy(urb->dev);
-#endif
 	/* We are done with this URB, resubmit it. Prep the USB to wait for
 	 * another frame */
 	usb_fill_bulk_urb(urb, serial->parent->usb,
diff --git a/drivers/net/usb/pegasus.h b/drivers/net/usb/pegasus.h
index 5d02f0200737..b90d8766ab74 100644
--- a/drivers/net/usb/pegasus.h
+++ b/drivers/net/usb/pegasus.h
@@ -177,7 +177,7 @@ PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x400c,
 PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0xabc1,
 		DEFAULT_GPIO_RESET )
 PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x200c,
-		DEFAULT_GPIO_RESET | PEGASUS_II ) 	
+		DEFAULT_GPIO_RESET | PEGASUS_II )
 PEGASUS_DEV( "Accton USB 10/100 Ethernet Adapter", VENDOR_ACCTON, 0x1046,
 		DEFAULT_GPIO_RESET )
 PEGASUS_DEV( "SpeedStream USB 10/100 Ethernet", VENDOR_ACCTON, 0x5046,
@@ -208,6 +208,8 @@ PEGASUS_DEV( "Allied Telesyn Int. AT-USB100", VENDOR_ALLIEDTEL, 0xb100,
  */
 PEGASUS_DEV_CLASS( "Belkin F5D5050 USB Ethernet", VENDOR_BELKIN, 0x0121, 0x00,
 		DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "Belkin F5U122 10/100 USB Ethernet", VENDOR_BELKIN, 0x0122,
+		DEFAULT_GPIO_RESET | PEGASUS_II )
 PEGASUS_DEV( "Billionton USB-100", VENDOR_BILLIONTON, 0x0986,
 		DEFAULT_GPIO_RESET )
 PEGASUS_DEV( "Billionton USBLP-100", VENDOR_BILLIONTON, 0x0987,
@@ -249,7 +251,7 @@ PEGASUS_DEV( "GIGABYTE GN-BR402W Wireless Router", VENDOR_GIGABYTE, 0x8002,
 PEGASUS_DEV( "Hawking UF100 10/100 Ethernet", VENDOR_HAWKING, 0x400c,
 		DEFAULT_GPIO_RESET | PEGASUS_II )
 PEGASUS_DEV( "HP hn210c Ethernet USB", VENDOR_HP, 0x811c,
-		DEFAULT_GPIO_RESET | PEGASUS_II )	
+		DEFAULT_GPIO_RESET | PEGASUS_II )
 PEGASUS_DEV( "IO DATA USB ET/TX", VENDOR_IODATA, 0x0904,
 		DEFAULT_GPIO_RESET )
 PEGASUS_DEV( "IO DATA USB ET/TX-S", VENDOR_IODATA, 0x0913,
diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c
new file mode 100644
index 000000000000..300e3e764fa2
--- /dev/null
+++ b/drivers/net/usb/smsc75xx.c
@@ -0,0 +1,1288 @@
+ /***************************************************************************
+ *
+ * Copyright (C) 2007-2010 SMSC
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ *****************************************************************************/
+
+#include <linux/module.h>
+#include <linux/kmod.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/crc32.h>
+#include <linux/usb/usbnet.h>
+#include "smsc75xx.h"
+
+#define SMSC_CHIPNAME			"smsc75xx"
+#define SMSC_DRIVER_VERSION		"1.0.0"
+#define HS_USB_PKT_SIZE			(512)
+#define FS_USB_PKT_SIZE			(64)
+#define DEFAULT_HS_BURST_CAP_SIZE	(16 * 1024 + 5 * HS_USB_PKT_SIZE)
+#define DEFAULT_FS_BURST_CAP_SIZE	(6 * 1024 + 33 * FS_USB_PKT_SIZE)
+#define DEFAULT_BULK_IN_DELAY		(0x00002000)
+#define MAX_SINGLE_PACKET_SIZE		(9000)
+#define LAN75XX_EEPROM_MAGIC		(0x7500)
+#define EEPROM_MAC_OFFSET		(0x01)
+#define DEFAULT_TX_CSUM_ENABLE		(true)
+#define DEFAULT_RX_CSUM_ENABLE		(true)
+#define DEFAULT_TSO_ENABLE		(true)
+#define SMSC75XX_INTERNAL_PHY_ID	(1)
+#define SMSC75XX_TX_OVERHEAD		(8)
+#define MAX_RX_FIFO_SIZE		(20 * 1024)
+#define MAX_TX_FIFO_SIZE		(12 * 1024)
+#define USB_VENDOR_ID_SMSC		(0x0424)
+#define USB_PRODUCT_ID_LAN7500		(0x7500)
+#define USB_PRODUCT_ID_LAN7505		(0x7505)
+
+#define check_warn(ret, fmt, args...) \
+	({ if (ret < 0) netdev_warn(dev->net, fmt, ##args); })
+
+#define check_warn_return(ret, fmt, args...) \
+	({ if (ret < 0) { netdev_warn(dev->net, fmt, ##args); return ret; } })
+
+#define check_warn_goto_done(ret, fmt, args...) \
+	({ if (ret < 0) { netdev_warn(dev->net, fmt, ##args); goto done; } })
+
+struct smsc75xx_priv {
+	struct usbnet *dev;
+	u32 rfe_ctl;
+	u32 multicast_hash_table[DP_SEL_VHF_HASH_LEN];
+	bool use_rx_csum;
+	struct mutex dataport_mutex;
+	spinlock_t rfe_ctl_lock;
+	struct work_struct set_multicast;
+};
+
+struct usb_context {
+	struct usb_ctrlrequest req;
+	struct usbnet *dev;
+};
+
+static int turbo_mode = true;
+module_param(turbo_mode, bool, 0644);
+MODULE_PARM_DESC(turbo_mode, "Enable multiple frames per Rx transaction");
+
+static int __must_check smsc75xx_read_reg(struct usbnet *dev, u32 index,
+					  u32 *data)
+{
+	u32 *buf = kmalloc(4, GFP_KERNEL);
+	int ret;
+
+	BUG_ON(!dev);
+
+	if (!buf)
+		return -ENOMEM;
+
+	ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0),
+		USB_VENDOR_REQUEST_READ_REGISTER,
+		USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		00, index, buf, 4, USB_CTRL_GET_TIMEOUT);
+
+	if (unlikely(ret < 0))
+		netdev_warn(dev->net,
+			"Failed to read register index 0x%08x", index);
+
+	le32_to_cpus(buf);
+	*data = *buf;
+	kfree(buf);
+
+	return ret;
+}
+
+static int __must_check smsc75xx_write_reg(struct usbnet *dev, u32 index,
+					   u32 data)
+{
+	u32 *buf = kmalloc(4, GFP_KERNEL);
+	int ret;
+
+	BUG_ON(!dev);
+
+	if (!buf)
+		return -ENOMEM;
+
+	*buf = data;
+	cpu_to_le32s(buf);
+
+	ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
+		USB_VENDOR_REQUEST_WRITE_REGISTER,
+		USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		00, index, buf, 4, USB_CTRL_SET_TIMEOUT);
+
+	if (unlikely(ret < 0))
+		netdev_warn(dev->net,
+			"Failed to write register index 0x%08x", index);
+
+	kfree(buf);
+
+	return ret;
+}
+
+/* Loop until the read is completed with timeout
+ * called with phy_mutex held */
+static int smsc75xx_phy_wait_not_busy(struct usbnet *dev)
+{
+	unsigned long start_time = jiffies;
+	u32 val;
+	int ret;
+
+	do {
+		ret = smsc75xx_read_reg(dev, MII_ACCESS, &val);
+		check_warn_return(ret, "Error reading MII_ACCESS");
+
+		if (!(val & MII_ACCESS_BUSY))
+			return 0;
+	} while (!time_after(jiffies, start_time + HZ));
+
+	return -EIO;
+}
+
+static int smsc75xx_mdio_read(struct net_device *netdev, int phy_id, int idx)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	u32 val, addr;
+	int ret;
+
+	mutex_lock(&dev->phy_mutex);
+
+	/* confirm MII not busy */
+	ret = smsc75xx_phy_wait_not_busy(dev);
+	check_warn_goto_done(ret, "MII is busy in smsc75xx_mdio_read");
+
+	/* set the address, index & direction (read from PHY) */
+	phy_id &= dev->mii.phy_id_mask;
+	idx &= dev->mii.reg_num_mask;
+	addr = ((phy_id << MII_ACCESS_PHY_ADDR_SHIFT) & MII_ACCESS_PHY_ADDR)
+		| ((idx << MII_ACCESS_REG_ADDR_SHIFT) & MII_ACCESS_REG_ADDR)
+		| MII_ACCESS_READ;
+	ret = smsc75xx_write_reg(dev, MII_ACCESS, addr);
+	check_warn_goto_done(ret, "Error writing MII_ACCESS");
+
+	ret = smsc75xx_phy_wait_not_busy(dev);
+	check_warn_goto_done(ret, "Timed out reading MII reg %02X", idx);
+
+	ret = smsc75xx_read_reg(dev, MII_DATA, &val);
+	check_warn_goto_done(ret, "Error reading MII_DATA");
+
+	ret = (u16)(val & 0xFFFF);
+
+done:
+	mutex_unlock(&dev->phy_mutex);
+	return ret;
+}
+
+static void smsc75xx_mdio_write(struct net_device *netdev, int phy_id, int idx,
+				int regval)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	u32 val, addr;
+	int ret;
+
+	mutex_lock(&dev->phy_mutex);
+
+	/* confirm MII not busy */
+	ret = smsc75xx_phy_wait_not_busy(dev);
+	check_warn_goto_done(ret, "MII is busy in smsc75xx_mdio_write");
+
+	val = regval;
+	ret = smsc75xx_write_reg(dev, MII_DATA, val);
+	check_warn_goto_done(ret, "Error writing MII_DATA");
+
+	/* set the address, index & direction (write to PHY) */
+	phy_id &= dev->mii.phy_id_mask;
+	idx &= dev->mii.reg_num_mask;
+	addr = ((phy_id << MII_ACCESS_PHY_ADDR_SHIFT) & MII_ACCESS_PHY_ADDR)
+		| ((idx << MII_ACCESS_REG_ADDR_SHIFT) & MII_ACCESS_REG_ADDR)
+		| MII_ACCESS_WRITE;
+	ret = smsc75xx_write_reg(dev, MII_ACCESS, addr);
+	check_warn_goto_done(ret, "Error writing MII_ACCESS");
+
+	ret = smsc75xx_phy_wait_not_busy(dev);
+	check_warn_goto_done(ret, "Timed out writing MII reg %02X", idx);
+
+done:
+	mutex_unlock(&dev->phy_mutex);
+}
+
+static int smsc75xx_wait_eeprom(struct usbnet *dev)
+{
+	unsigned long start_time = jiffies;
+	u32 val;
+	int ret;
+
+	do {
+		ret = smsc75xx_read_reg(dev, E2P_CMD, &val);
+		check_warn_return(ret, "Error reading E2P_CMD");
+
+		if (!(val & E2P_CMD_BUSY) || (val & E2P_CMD_TIMEOUT))
+			break;
+		udelay(40);
+	} while (!time_after(jiffies, start_time + HZ));
+
+	if (val & (E2P_CMD_TIMEOUT | E2P_CMD_BUSY)) {
+		netdev_warn(dev->net, "EEPROM read operation timeout");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int smsc75xx_eeprom_confirm_not_busy(struct usbnet *dev)
+{
+	unsigned long start_time = jiffies;
+	u32 val;
+	int ret;
+
+	do {
+		ret = smsc75xx_read_reg(dev, E2P_CMD, &val);
+		check_warn_return(ret, "Error reading E2P_CMD");
+
+		if (!(val & E2P_CMD_BUSY))
+			return 0;
+
+		udelay(40);
+	} while (!time_after(jiffies, start_time + HZ));
+
+	netdev_warn(dev->net, "EEPROM is busy");
+	return -EIO;
+}
+
+static int smsc75xx_read_eeprom(struct usbnet *dev, u32 offset, u32 length,
+				u8 *data)
+{
+	u32 val;
+	int i, ret;
+
+	BUG_ON(!dev);
+	BUG_ON(!data);
+
+	ret = smsc75xx_eeprom_confirm_not_busy(dev);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < length; i++) {
+		val = E2P_CMD_BUSY | E2P_CMD_READ | (offset & E2P_CMD_ADDR);
+		ret = smsc75xx_write_reg(dev, E2P_CMD, val);
+		check_warn_return(ret, "Error writing E2P_CMD");
+
+		ret = smsc75xx_wait_eeprom(dev);
+		if (ret < 0)
+			return ret;
+
+		ret = smsc75xx_read_reg(dev, E2P_DATA, &val);
+		check_warn_return(ret, "Error reading E2P_DATA");
+
+		data[i] = val & 0xFF;
+		offset++;
+	}
+
+	return 0;
+}
+
+static int smsc75xx_write_eeprom(struct usbnet *dev, u32 offset, u32 length,
+				 u8 *data)
+{
+	u32 val;
+	int i, ret;
+
+	BUG_ON(!dev);
+	BUG_ON(!data);
+
+	ret = smsc75xx_eeprom_confirm_not_busy(dev);
+	if (ret)
+		return ret;
+
+	/* Issue write/erase enable command */
+	val = E2P_CMD_BUSY | E2P_CMD_EWEN;
+	ret = smsc75xx_write_reg(dev, E2P_CMD, val);
+	check_warn_return(ret, "Error writing E2P_CMD");
+
+	ret = smsc75xx_wait_eeprom(dev);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < length; i++) {
+
+		/* Fill data register */
+		val = data[i];
+		ret = smsc75xx_write_reg(dev, E2P_DATA, val);
+		check_warn_return(ret, "Error writing E2P_DATA");
+
+		/* Send "write" command */
+		val = E2P_CMD_BUSY | E2P_CMD_WRITE | (offset & E2P_CMD_ADDR);
+		ret = smsc75xx_write_reg(dev, E2P_CMD, val);
+		check_warn_return(ret, "Error writing E2P_CMD");
+
+		ret = smsc75xx_wait_eeprom(dev);
+		if (ret < 0)
+			return ret;
+
+		offset++;
+	}
+
+	return 0;
+}
+
+static int smsc75xx_dataport_wait_not_busy(struct usbnet *dev)
+{
+	int i, ret;
+
+	for (i = 0; i < 100; i++) {
+		u32 dp_sel;
+		ret = smsc75xx_read_reg(dev, DP_SEL, &dp_sel);
+		check_warn_return(ret, "Error reading DP_SEL");
+
+		if (dp_sel & DP_SEL_DPRDY)
+			return 0;
+
+		udelay(40);
+	}
+
+	netdev_warn(dev->net, "smsc75xx_dataport_wait_not_busy timed out");
+
+	return -EIO;
+}
+
+static int smsc75xx_dataport_write(struct usbnet *dev, u32 ram_select, u32 addr,
+				   u32 length, u32 *buf)
+{
+	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+	u32 dp_sel;
+	int i, ret;
+
+	mutex_lock(&pdata->dataport_mutex);
+
+	ret = smsc75xx_dataport_wait_not_busy(dev);
+	check_warn_goto_done(ret, "smsc75xx_dataport_write busy on entry");
+
+	ret = smsc75xx_read_reg(dev, DP_SEL, &dp_sel);
+	check_warn_goto_done(ret, "Error reading DP_SEL");
+
+	dp_sel &= ~DP_SEL_RSEL;
+	dp_sel |= ram_select;
+	ret = smsc75xx_write_reg(dev, DP_SEL, dp_sel);
+	check_warn_goto_done(ret, "Error writing DP_SEL");
+
+	for (i = 0; i < length; i++) {
+		ret = smsc75xx_write_reg(dev, DP_ADDR, addr + i);
+		check_warn_goto_done(ret, "Error writing DP_ADDR");
+
+		ret = smsc75xx_write_reg(dev, DP_DATA, buf[i]);
+		check_warn_goto_done(ret, "Error writing DP_DATA");
+
+		ret = smsc75xx_write_reg(dev, DP_CMD, DP_CMD_WRITE);
+		check_warn_goto_done(ret, "Error writing DP_CMD");
+
+		ret = smsc75xx_dataport_wait_not_busy(dev);
+		check_warn_goto_done(ret, "smsc75xx_dataport_write timeout");
+	}
+
+done:
+	mutex_unlock(&pdata->dataport_mutex);
+	return ret;
+}
+
+/* returns hash bit number for given MAC address */
+static u32 smsc75xx_hash(char addr[ETH_ALEN])
+{
+	return (ether_crc(ETH_ALEN, addr) >> 23) & 0x1ff;
+}
+
+static void smsc75xx_deferred_multicast_write(struct work_struct *param)
+{
+	struct smsc75xx_priv *pdata =
+		container_of(param, struct smsc75xx_priv, set_multicast);
+	struct usbnet *dev = pdata->dev;
+	int ret;
+
+	netif_dbg(dev, drv, dev->net, "deferred multicast write 0x%08x",
+		pdata->rfe_ctl);
+
+	smsc75xx_dataport_write(dev, DP_SEL_VHF, DP_SEL_VHF_VLAN_LEN,
+		DP_SEL_VHF_HASH_LEN, pdata->multicast_hash_table);
+
+	ret = smsc75xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl);
+	check_warn(ret, "Error writing RFE_CRL");
+}
+
+static void smsc75xx_set_multicast(struct net_device *netdev)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&pdata->rfe_ctl_lock, flags);
+
+	pdata->rfe_ctl &=
+		~(RFE_CTL_AU | RFE_CTL_AM | RFE_CTL_DPF | RFE_CTL_MHF);
+	pdata->rfe_ctl |= RFE_CTL_AB;
+
+	for (i = 0; i < DP_SEL_VHF_HASH_LEN; i++)
+		pdata->multicast_hash_table[i] = 0;
+
+	if (dev->net->flags & IFF_PROMISC) {
+		netif_dbg(dev, drv, dev->net, "promiscuous mode enabled");
+		pdata->rfe_ctl |= RFE_CTL_AM | RFE_CTL_AU;
+	} else if (dev->net->flags & IFF_ALLMULTI) {
+		netif_dbg(dev, drv, dev->net, "receive all multicast enabled");
+		pdata->rfe_ctl |= RFE_CTL_AM | RFE_CTL_DPF;
+	} else if (!netdev_mc_empty(dev->net)) {
+		struct dev_mc_list *mc_list;
+
+		netif_dbg(dev, drv, dev->net, "receive multicast hash filter");
+
+		pdata->rfe_ctl |= RFE_CTL_MHF | RFE_CTL_DPF;
+
+		netdev_for_each_mc_addr(mc_list, netdev) {
+			u32 bitnum = smsc75xx_hash(mc_list->dmi_addr);
+			pdata->multicast_hash_table[bitnum / 32] |=
+				(1 << (bitnum % 32));
+		}
+	} else {
+		netif_dbg(dev, drv, dev->net, "receive own packets only");
+		pdata->rfe_ctl |= RFE_CTL_DPF;
+	}
+
+	spin_unlock_irqrestore(&pdata->rfe_ctl_lock, flags);
+
+	/* defer register writes to a sleepable context */
+	schedule_work(&pdata->set_multicast);
+}
+
+static int smsc75xx_update_flowcontrol(struct usbnet *dev, u8 duplex,
+					    u16 lcladv, u16 rmtadv)
+{
+	u32 flow = 0, fct_flow = 0;
+	int ret;
+
+	if (duplex == DUPLEX_FULL) {
+		u8 cap = mii_resolve_flowctrl_fdx(lcladv, rmtadv);
+
+		if (cap & FLOW_CTRL_TX) {
+			flow = (FLOW_TX_FCEN | 0xFFFF);
+			/* set fct_flow thresholds to 20% and 80% */
+			fct_flow = (8 << 8) | 32;
+		}
+
+		if (cap & FLOW_CTRL_RX)
+			flow |= FLOW_RX_FCEN;
+
+		netif_dbg(dev, link, dev->net, "rx pause %s, tx pause %s",
+			(cap & FLOW_CTRL_RX ? "enabled" : "disabled"),
+			(cap & FLOW_CTRL_TX ? "enabled" : "disabled"));
+	} else {
+		netif_dbg(dev, link, dev->net, "half duplex");
+	}
+
+	ret = smsc75xx_write_reg(dev, FLOW, flow);
+	check_warn_return(ret, "Error writing FLOW");
+
+	ret = smsc75xx_write_reg(dev, FCT_FLOW, fct_flow);
+	check_warn_return(ret, "Error writing FCT_FLOW");
+
+	return 0;
+}
+
+static int smsc75xx_link_reset(struct usbnet *dev)
+{
+	struct mii_if_info *mii = &dev->mii;
+	struct ethtool_cmd ecmd;
+	u16 lcladv, rmtadv;
+	int ret;
+
+	/* clear interrupt status */
+	ret = smsc75xx_mdio_read(dev->net, mii->phy_id, PHY_INT_SRC);
+	check_warn_return(ret, "Error reading PHY_INT_SRC");
+
+	ret = smsc75xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL);
+	check_warn_return(ret, "Error writing INT_STS");
+
+	mii_check_media(mii, 1, 1);
+	mii_ethtool_gset(&dev->mii, &ecmd);
+	lcladv = smsc75xx_mdio_read(dev->net, mii->phy_id, MII_ADVERTISE);
+	rmtadv = smsc75xx_mdio_read(dev->net, mii->phy_id, MII_LPA);
+
+	netif_dbg(dev, link, dev->net, "speed: %d duplex: %d lcladv: %04x"
+		" rmtadv: %04x", ecmd.speed, ecmd.duplex, lcladv, rmtadv);
+
+	return smsc75xx_update_flowcontrol(dev, ecmd.duplex, lcladv, rmtadv);
+}
+
+static void smsc75xx_status(struct usbnet *dev, struct urb *urb)
+{
+	u32 intdata;
+
+	if (urb->actual_length != 4) {
+		netdev_warn(dev->net,
+			"unexpected urb length %d", urb->actual_length);
+		return;
+	}
+
+	memcpy(&intdata, urb->transfer_buffer, 4);
+	le32_to_cpus(&intdata);
+
+	netif_dbg(dev, link, dev->net, "intdata: 0x%08X", intdata);
+
+	if (intdata & INT_ENP_PHY_INT)
+		usbnet_defer_kevent(dev, EVENT_LINK_RESET);
+	else
+		netdev_warn(dev->net,
+			"unexpected interrupt, intdata=0x%08X", intdata);
+}
+
+/* Enable or disable Rx checksum offload engine */
+static int smsc75xx_set_rx_csum_offload(struct usbnet *dev)
+{
+	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&pdata->rfe_ctl_lock, flags);
+
+	if (pdata->use_rx_csum)
+		pdata->rfe_ctl |= RFE_CTL_TCPUDP_CKM | RFE_CTL_IP_CKM;
+	else
+		pdata->rfe_ctl &= ~(RFE_CTL_TCPUDP_CKM | RFE_CTL_IP_CKM);
+
+	spin_unlock_irqrestore(&pdata->rfe_ctl_lock, flags);
+
+	ret = smsc75xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl);
+	check_warn_return(ret, "Error writing RFE_CTL");
+
+	return 0;
+}
+
+static int smsc75xx_ethtool_get_eeprom_len(struct net_device *net)
+{
+	return MAX_EEPROM_SIZE;
+}
+
+static int smsc75xx_ethtool_get_eeprom(struct net_device *netdev,
+				       struct ethtool_eeprom *ee, u8 *data)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+
+	ee->magic = LAN75XX_EEPROM_MAGIC;
+
+	return smsc75xx_read_eeprom(dev, ee->offset, ee->len, data);
+}
+
+static int smsc75xx_ethtool_set_eeprom(struct net_device *netdev,
+				       struct ethtool_eeprom *ee, u8 *data)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+
+	if (ee->magic != LAN75XX_EEPROM_MAGIC) {
+		netdev_warn(dev->net,
+			"EEPROM: magic value mismatch: 0x%x", ee->magic);
+		return -EINVAL;
+	}
+
+	return smsc75xx_write_eeprom(dev, ee->offset, ee->len, data);
+}
+
+static u32 smsc75xx_ethtool_get_rx_csum(struct net_device *netdev)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+
+	return pdata->use_rx_csum;
+}
+
+static int smsc75xx_ethtool_set_rx_csum(struct net_device *netdev, u32 val)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+
+	pdata->use_rx_csum = !!val;
+
+	return smsc75xx_set_rx_csum_offload(dev);
+}
+
+static int smsc75xx_ethtool_set_tso(struct net_device *netdev, u32 data)
+{
+	if (data)
+		netdev->features |= NETIF_F_TSO | NETIF_F_TSO6;
+	else
+		netdev->features &= ~(NETIF_F_TSO | NETIF_F_TSO6);
+
+	return 0;
+}
+
+static const struct ethtool_ops smsc75xx_ethtool_ops = {
+	.get_link	= usbnet_get_link,
+	.nway_reset	= usbnet_nway_reset,
+	.get_drvinfo	= usbnet_get_drvinfo,
+	.get_msglevel	= usbnet_get_msglevel,
+	.set_msglevel	= usbnet_set_msglevel,
+	.get_settings	= usbnet_get_settings,
+	.set_settings	= usbnet_set_settings,
+	.get_eeprom_len	= smsc75xx_ethtool_get_eeprom_len,
+	.get_eeprom	= smsc75xx_ethtool_get_eeprom,
+	.set_eeprom	= smsc75xx_ethtool_set_eeprom,
+	.get_tx_csum	= ethtool_op_get_tx_csum,
+	.set_tx_csum	= ethtool_op_set_tx_hw_csum,
+	.get_rx_csum	= smsc75xx_ethtool_get_rx_csum,
+	.set_rx_csum	= smsc75xx_ethtool_set_rx_csum,
+	.get_tso	= ethtool_op_get_tso,
+	.set_tso	= smsc75xx_ethtool_set_tso,
+};
+
+static int smsc75xx_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+
+	if (!netif_running(netdev))
+		return -EINVAL;
+
+	return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
+}
+
+static void smsc75xx_init_mac_address(struct usbnet *dev)
+{
+	/* try reading mac address from EEPROM */
+	if (smsc75xx_read_eeprom(dev, EEPROM_MAC_OFFSET, ETH_ALEN,
+			dev->net->dev_addr) == 0) {
+		if (is_valid_ether_addr(dev->net->dev_addr)) {
+			/* eeprom values are valid so use them */
+			netif_dbg(dev, ifup, dev->net,
+				"MAC address read from EEPROM");
+			return;
+		}
+	}
+
+	/* no eeprom, or eeprom values are invalid. generate random MAC */
+	random_ether_addr(dev->net->dev_addr);
+	netif_dbg(dev, ifup, dev->net, "MAC address set to random_ether_addr");
+}
+
+static int smsc75xx_set_mac_address(struct usbnet *dev)
+{
+	u32 addr_lo = dev->net->dev_addr[0] | dev->net->dev_addr[1] << 8 |
+		dev->net->dev_addr[2] << 16 | dev->net->dev_addr[3] << 24;
+	u32 addr_hi = dev->net->dev_addr[4] | dev->net->dev_addr[5] << 8;
+
+	int ret = smsc75xx_write_reg(dev, RX_ADDRH, addr_hi);
+	check_warn_return(ret, "Failed to write RX_ADDRH: %d", ret);
+
+	ret = smsc75xx_write_reg(dev, RX_ADDRL, addr_lo);
+	check_warn_return(ret, "Failed to write RX_ADDRL: %d", ret);
+
+	addr_hi |= ADDR_FILTX_FB_VALID;
+	ret = smsc75xx_write_reg(dev, ADDR_FILTX, addr_hi);
+	check_warn_return(ret, "Failed to write ADDR_FILTX: %d", ret);
+
+	ret = smsc75xx_write_reg(dev, ADDR_FILTX + 4, addr_lo);
+	check_warn_return(ret, "Failed to write ADDR_FILTX+4: %d", ret);
+
+	return 0;
+}
+
+static int smsc75xx_phy_initialize(struct usbnet *dev)
+{
+	int bmcr, timeout = 0;
+
+	/* Initialize MII structure */
+	dev->mii.dev = dev->net;
+	dev->mii.mdio_read = smsc75xx_mdio_read;
+	dev->mii.mdio_write = smsc75xx_mdio_write;
+	dev->mii.phy_id_mask = 0x1f;
+	dev->mii.reg_num_mask = 0x1f;
+	dev->mii.phy_id = SMSC75XX_INTERNAL_PHY_ID;
+
+	/* reset phy and wait for reset to complete */
+	smsc75xx_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
+
+	do {
+		msleep(10);
+		bmcr = smsc75xx_mdio_read(dev->net, dev->mii.phy_id, MII_BMCR);
+		check_warn_return(bmcr, "Error reading MII_BMCR");
+		timeout++;
+	} while ((bmcr & MII_BMCR) && (timeout < 100));
+
+	if (timeout >= 100) {
+		netdev_warn(dev->net, "timeout on PHY Reset");
+		return -EIO;
+	}
+
+	smsc75xx_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
+		ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP |
+		ADVERTISE_PAUSE_ASYM);
+
+	/* read to clear */
+	smsc75xx_mdio_read(dev->net, dev->mii.phy_id, PHY_INT_SRC);
+	check_warn_return(bmcr, "Error reading PHY_INT_SRC");
+
+	smsc75xx_mdio_write(dev->net, dev->mii.phy_id, PHY_INT_MASK,
+		PHY_INT_MASK_DEFAULT);
+	mii_nway_restart(&dev->mii);
+
+	netif_dbg(dev, ifup, dev->net, "phy initialised successfully");
+	return 0;
+}
+
+static int smsc75xx_set_rx_max_frame_length(struct usbnet *dev, int size)
+{
+	int ret = 0;
+	u32 buf;
+	bool rxenabled;
+
+	ret = smsc75xx_read_reg(dev, MAC_RX, &buf);
+	check_warn_return(ret, "Failed to read MAC_RX: %d", ret);
+
+	rxenabled = ((buf & MAC_RX_RXEN) != 0);
+
+	if (rxenabled) {
+		buf &= ~MAC_RX_RXEN;
+		ret = smsc75xx_write_reg(dev, MAC_RX, buf);
+		check_warn_return(ret, "Failed to write MAC_RX: %d", ret);
+	}
+
+	/* add 4 to size for FCS */
+	buf &= ~MAC_RX_MAX_SIZE;
+	buf |= (((size + 4) << MAC_RX_MAX_SIZE_SHIFT) & MAC_RX_MAX_SIZE);
+
+	ret = smsc75xx_write_reg(dev, MAC_RX, buf);
+	check_warn_return(ret, "Failed to write MAC_RX: %d", ret);
+
+	if (rxenabled) {
+		buf |= MAC_RX_RXEN;
+		ret = smsc75xx_write_reg(dev, MAC_RX, buf);
+		check_warn_return(ret, "Failed to write MAC_RX: %d", ret);
+	}
+
+	return 0;
+}
+
+static int smsc75xx_change_mtu(struct net_device *netdev, int new_mtu)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+
+	int ret = smsc75xx_set_rx_max_frame_length(dev, new_mtu);
+	check_warn_return(ret, "Failed to set mac rx frame length");
+
+	return usbnet_change_mtu(netdev, new_mtu);
+}
+
+static int smsc75xx_reset(struct usbnet *dev)
+{
+	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+	u32 buf;
+	int ret = 0, timeout;
+
+	netif_dbg(dev, ifup, dev->net, "entering smsc75xx_reset");
+
+	ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
+	check_warn_return(ret, "Failed to read HW_CFG: %d", ret);
+
+	buf |= HW_CFG_LRST;
+
+	ret = smsc75xx_write_reg(dev, HW_CFG, buf);
+	check_warn_return(ret, "Failed to write HW_CFG: %d", ret);
+
+	timeout = 0;
+	do {
+		msleep(10);
+		ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
+		check_warn_return(ret, "Failed to read HW_CFG: %d", ret);
+		timeout++;
+	} while ((buf & HW_CFG_LRST) && (timeout < 100));
+
+	if (timeout >= 100) {
+		netdev_warn(dev->net, "timeout on completion of Lite Reset");
+		return -EIO;
+	}
+
+	netif_dbg(dev, ifup, dev->net, "Lite reset complete, resetting PHY");
+
+	ret = smsc75xx_read_reg(dev, PMT_CTL, &buf);
+	check_warn_return(ret, "Failed to read PMT_CTL: %d", ret);
+
+	buf |= PMT_CTL_PHY_RST;
+
+	ret = smsc75xx_write_reg(dev, PMT_CTL, buf);
+	check_warn_return(ret, "Failed to write PMT_CTL: %d", ret);
+
+	timeout = 0;
+	do {
+		msleep(10);
+		ret = smsc75xx_read_reg(dev, PMT_CTL, &buf);
+		check_warn_return(ret, "Failed to read PMT_CTL: %d", ret);
+		timeout++;
+	} while ((buf & PMT_CTL_PHY_RST) && (timeout < 100));
+
+	if (timeout >= 100) {
+		netdev_warn(dev->net, "timeout waiting for PHY Reset");
+		return -EIO;
+	}
+
+	netif_dbg(dev, ifup, dev->net, "PHY reset complete");
+
+	smsc75xx_init_mac_address(dev);
+
+	ret = smsc75xx_set_mac_address(dev);
+	check_warn_return(ret, "Failed to set mac address");
+
+	netif_dbg(dev, ifup, dev->net, "MAC Address: %pM", dev->net->dev_addr);
+
+	ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
+	check_warn_return(ret, "Failed to read HW_CFG: %d", ret);
+
+	netif_dbg(dev, ifup, dev->net, "Read Value from HW_CFG : 0x%08x", buf);
+
+	buf |= HW_CFG_BIR;
+
+	ret = smsc75xx_write_reg(dev, HW_CFG, buf);
+	check_warn_return(ret, "Failed to write HW_CFG: %d", ret);
+
+	ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
+	check_warn_return(ret, "Failed to read HW_CFG: %d", ret);
+
+	netif_dbg(dev, ifup, dev->net, "Read Value from HW_CFG after "
+			"writing HW_CFG_BIR: 0x%08x", buf);
+
+	if (!turbo_mode) {
+		buf = 0;
+		dev->rx_urb_size = MAX_SINGLE_PACKET_SIZE;
+	} else if (dev->udev->speed == USB_SPEED_HIGH) {
+		buf = DEFAULT_HS_BURST_CAP_SIZE / HS_USB_PKT_SIZE;
+		dev->rx_urb_size = DEFAULT_HS_BURST_CAP_SIZE;
+	} else {
+		buf = DEFAULT_FS_BURST_CAP_SIZE / FS_USB_PKT_SIZE;
+		dev->rx_urb_size = DEFAULT_FS_BURST_CAP_SIZE;
+	}
+
+	netif_dbg(dev, ifup, dev->net, "rx_urb_size=%ld",
+		(ulong)dev->rx_urb_size);
+
+	ret = smsc75xx_write_reg(dev, BURST_CAP, buf);
+	check_warn_return(ret, "Failed to write BURST_CAP: %d", ret);
+
+	ret = smsc75xx_read_reg(dev, BURST_CAP, &buf);
+	check_warn_return(ret, "Failed to read BURST_CAP: %d", ret);
+
+	netif_dbg(dev, ifup, dev->net,
+		"Read Value from BURST_CAP after writing: 0x%08x", buf);
+
+	ret = smsc75xx_write_reg(dev, BULK_IN_DLY, DEFAULT_BULK_IN_DELAY);
+	check_warn_return(ret, "Failed to write BULK_IN_DLY: %d", ret);
+
+	ret = smsc75xx_read_reg(dev, BULK_IN_DLY, &buf);
+	check_warn_return(ret, "Failed to read BULK_IN_DLY: %d", ret);
+
+	netif_dbg(dev, ifup, dev->net,
+		"Read Value from BULK_IN_DLY after writing: 0x%08x", buf);
+
+	if (turbo_mode) {
+		ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
+		check_warn_return(ret, "Failed to read HW_CFG: %d", ret);
+
+		netif_dbg(dev, ifup, dev->net, "HW_CFG: 0x%08x", buf);
+
+		buf |= (HW_CFG_MEF | HW_CFG_BCE);
+
+		ret = smsc75xx_write_reg(dev, HW_CFG, buf);
+		check_warn_return(ret, "Failed to write HW_CFG: %d", ret);
+
+		ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
+		check_warn_return(ret, "Failed to read HW_CFG: %d", ret);
+
+		netif_dbg(dev, ifup, dev->net, "HW_CFG: 0x%08x", buf);
+	}
+
+	/* set FIFO sizes */
+	buf = (MAX_RX_FIFO_SIZE - 512) / 512;
+	ret = smsc75xx_write_reg(dev, FCT_RX_FIFO_END, buf);
+	check_warn_return(ret, "Failed to write FCT_RX_FIFO_END: %d", ret);
+
+	netif_dbg(dev, ifup, dev->net, "FCT_RX_FIFO_END set to 0x%08x", buf);
+
+	buf = (MAX_TX_FIFO_SIZE - 512) / 512;
+	ret = smsc75xx_write_reg(dev, FCT_TX_FIFO_END, buf);
+	check_warn_return(ret, "Failed to write FCT_TX_FIFO_END: %d", ret);
+
+	netif_dbg(dev, ifup, dev->net, "FCT_TX_FIFO_END set to 0x%08x", buf);
+
+	ret = smsc75xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL);
+	check_warn_return(ret, "Failed to write INT_STS: %d", ret);
+
+	ret = smsc75xx_read_reg(dev, ID_REV, &buf);
+	check_warn_return(ret, "Failed to read ID_REV: %d", ret);
+
+	netif_dbg(dev, ifup, dev->net, "ID_REV = 0x%08x", buf);
+
+	/* Configure GPIO pins as LED outputs */
+	ret = smsc75xx_read_reg(dev, LED_GPIO_CFG, &buf);
+	check_warn_return(ret, "Failed to read LED_GPIO_CFG: %d", ret);
+
+	buf &= ~(LED_GPIO_CFG_LED2_FUN_SEL | LED_GPIO_CFG_LED10_FUN_SEL);
+	buf |= LED_GPIO_CFG_LEDGPIO_EN | LED_GPIO_CFG_LED2_FUN_SEL;
+
+	ret = smsc75xx_write_reg(dev, LED_GPIO_CFG, buf);
+	check_warn_return(ret, "Failed to write LED_GPIO_CFG: %d", ret);
+
+	ret = smsc75xx_write_reg(dev, FLOW, 0);
+	check_warn_return(ret, "Failed to write FLOW: %d", ret);
+
+	ret = smsc75xx_write_reg(dev, FCT_FLOW, 0);
+	check_warn_return(ret, "Failed to write FCT_FLOW: %d", ret);
+
+	/* Don't need rfe_ctl_lock during initialisation */
+	ret = smsc75xx_read_reg(dev, RFE_CTL, &pdata->rfe_ctl);
+	check_warn_return(ret, "Failed to read RFE_CTL: %d", ret);
+
+	pdata->rfe_ctl |= RFE_CTL_AB | RFE_CTL_DPF;
+
+	ret = smsc75xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl);
+	check_warn_return(ret, "Failed to write RFE_CTL: %d", ret);
+
+	ret = smsc75xx_read_reg(dev, RFE_CTL, &pdata->rfe_ctl);
+	check_warn_return(ret, "Failed to read RFE_CTL: %d", ret);
+
+	netif_dbg(dev, ifup, dev->net, "RFE_CTL set to 0x%08x", pdata->rfe_ctl);
+
+	/* Enable or disable checksum offload engines */
+	ethtool_op_set_tx_hw_csum(dev->net, DEFAULT_TX_CSUM_ENABLE);
+	ret = smsc75xx_set_rx_csum_offload(dev);
+	check_warn_return(ret, "Failed to set rx csum offload: %d", ret);
+
+	smsc75xx_ethtool_set_tso(dev->net, DEFAULT_TSO_ENABLE);
+
+	smsc75xx_set_multicast(dev->net);
+
+	ret = smsc75xx_phy_initialize(dev);
+	check_warn_return(ret, "Failed to initialize PHY: %d", ret);
+
+	ret = smsc75xx_read_reg(dev, INT_EP_CTL, &buf);
+	check_warn_return(ret, "Failed to read INT_EP_CTL: %d", ret);
+
+	/* enable PHY interrupts */
+	buf |= INT_ENP_PHY_INT;
+
+	ret = smsc75xx_write_reg(dev, INT_EP_CTL, buf);
+	check_warn_return(ret, "Failed to write INT_EP_CTL: %d", ret);
+
+	ret = smsc75xx_read_reg(dev, MAC_TX, &buf);
+	check_warn_return(ret, "Failed to read MAC_TX: %d", ret);
+
+	buf |= MAC_TX_TXEN;
+
+	ret = smsc75xx_write_reg(dev, MAC_TX, buf);
+	check_warn_return(ret, "Failed to write MAC_TX: %d", ret);
+
+	netif_dbg(dev, ifup, dev->net, "MAC_TX set to 0x%08x", buf);
+
+	ret = smsc75xx_read_reg(dev, FCT_TX_CTL, &buf);
+	check_warn_return(ret, "Failed to read FCT_TX_CTL: %d", ret);
+
+	buf |= FCT_TX_CTL_EN;
+
+	ret = smsc75xx_write_reg(dev, FCT_TX_CTL, buf);
+	check_warn_return(ret, "Failed to write FCT_TX_CTL: %d", ret);
+
+	netif_dbg(dev, ifup, dev->net, "FCT_TX_CTL set to 0x%08x", buf);
+
+	ret = smsc75xx_set_rx_max_frame_length(dev, 1514);
+	check_warn_return(ret, "Failed to set max rx frame length");
+
+	ret = smsc75xx_read_reg(dev, MAC_RX, &buf);
+	check_warn_return(ret, "Failed to read MAC_RX: %d", ret);
+
+	buf |= MAC_RX_RXEN;
+
+	ret = smsc75xx_write_reg(dev, MAC_RX, buf);
+	check_warn_return(ret, "Failed to write MAC_RX: %d", ret);
+
+	netif_dbg(dev, ifup, dev->net, "MAC_RX set to 0x%08x", buf);
+
+	ret = smsc75xx_read_reg(dev, FCT_RX_CTL, &buf);
+	check_warn_return(ret, "Failed to read FCT_RX_CTL: %d", ret);
+
+	buf |= FCT_RX_CTL_EN;
+
+	ret = smsc75xx_write_reg(dev, FCT_RX_CTL, buf);
+	check_warn_return(ret, "Failed to write FCT_RX_CTL: %d", ret);
+
+	netif_dbg(dev, ifup, dev->net, "FCT_RX_CTL set to 0x%08x", buf);
+
+	netif_dbg(dev, ifup, dev->net, "smsc75xx_reset, return 0");
+	return 0;
+}
+
+static const struct net_device_ops smsc75xx_netdev_ops = {
+	.ndo_open		= usbnet_open,
+	.ndo_stop		= usbnet_stop,
+	.ndo_start_xmit		= usbnet_start_xmit,
+	.ndo_tx_timeout		= usbnet_tx_timeout,
+	.ndo_change_mtu		= smsc75xx_change_mtu,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_do_ioctl 		= smsc75xx_ioctl,
+	.ndo_set_multicast_list = smsc75xx_set_multicast,
+};
+
+static int smsc75xx_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	struct smsc75xx_priv *pdata = NULL;
+	int ret;
+
+	printk(KERN_INFO SMSC_CHIPNAME " v" SMSC_DRIVER_VERSION "\n");
+
+	ret = usbnet_get_endpoints(dev, intf);
+	check_warn_return(ret, "usbnet_get_endpoints failed: %d", ret);
+
+	dev->data[0] = (unsigned long)kzalloc(sizeof(struct smsc75xx_priv),
+		GFP_KERNEL);
+
+	pdata = (struct smsc75xx_priv *)(dev->data[0]);
+	if (!pdata) {
+		netdev_warn(dev->net, "Unable to allocate smsc75xx_priv");
+		return -ENOMEM;
+	}
+
+	pdata->dev = dev;
+
+	spin_lock_init(&pdata->rfe_ctl_lock);
+	mutex_init(&pdata->dataport_mutex);
+
+	INIT_WORK(&pdata->set_multicast, smsc75xx_deferred_multicast_write);
+
+	pdata->use_rx_csum = DEFAULT_RX_CSUM_ENABLE;
+
+	/* We have to advertise SG otherwise TSO cannot be enabled */
+	dev->net->features |= NETIF_F_SG;
+
+	/* Init all registers */
+	ret = smsc75xx_reset(dev);
+
+	dev->net->netdev_ops = &smsc75xx_netdev_ops;
+	dev->net->ethtool_ops = &smsc75xx_ethtool_ops;
+	dev->net->flags |= IFF_MULTICAST;
+	dev->net->hard_header_len += SMSC75XX_TX_OVERHEAD;
+	return 0;
+}
+
+static void smsc75xx_unbind(struct usbnet *dev, struct usb_interface *intf)
+{
+	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+	if (pdata) {
+		netif_dbg(dev, ifdown, dev->net, "free pdata");
+		kfree(pdata);
+		pdata = NULL;
+		dev->data[0] = 0;
+	}
+}
+
+static void smsc75xx_rx_csum_offload(struct sk_buff *skb, u32 rx_cmd_a,
+				     u32 rx_cmd_b)
+{
+	if (unlikely(rx_cmd_a & RX_CMD_A_LCSM)) {
+		skb->ip_summed = CHECKSUM_NONE;
+	} else {
+		skb->csum = ntohs((u16)(rx_cmd_b >> RX_CMD_B_CSUM_SHIFT));
+		skb->ip_summed = CHECKSUM_COMPLETE;
+	}
+}
+
+static int smsc75xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+
+	while (skb->len > 0) {
+		u32 rx_cmd_a, rx_cmd_b, align_count, size;
+		struct sk_buff *ax_skb;
+		unsigned char *packet;
+
+		memcpy(&rx_cmd_a, skb->data, sizeof(rx_cmd_a));
+		le32_to_cpus(&rx_cmd_a);
+		skb_pull(skb, 4);
+
+		memcpy(&rx_cmd_b, skb->data, sizeof(rx_cmd_b));
+		le32_to_cpus(&rx_cmd_b);
+		skb_pull(skb, 4 + NET_IP_ALIGN);
+
+		packet = skb->data;
+
+		/* get the packet length */
+		size = (rx_cmd_a & RX_CMD_A_LEN) - NET_IP_ALIGN;
+		align_count = (4 - ((size + NET_IP_ALIGN) % 4)) % 4;
+
+		if (unlikely(rx_cmd_a & RX_CMD_A_RED)) {
+			netif_dbg(dev, rx_err, dev->net,
+				"Error rx_cmd_a=0x%08x", rx_cmd_a);
+			dev->net->stats.rx_errors++;
+			dev->net->stats.rx_dropped++;
+
+			if (rx_cmd_a & RX_CMD_A_FCS)
+				dev->net->stats.rx_crc_errors++;
+			else if (rx_cmd_a & (RX_CMD_A_LONG | RX_CMD_A_RUNT))
+				dev->net->stats.rx_frame_errors++;
+		} else {
+			/* ETH_FRAME_LEN + 4(CRC) + 2(COE) + 4(Vlan) */
+			if (unlikely(size > (ETH_FRAME_LEN + 12))) {
+				netif_dbg(dev, rx_err, dev->net,
+					"size err rx_cmd_a=0x%08x", rx_cmd_a);
+				return 0;
+			}
+
+			/* last frame in this batch */
+			if (skb->len == size) {
+				if (pdata->use_rx_csum)
+					smsc75xx_rx_csum_offload(skb, rx_cmd_a,
+						rx_cmd_b);
+				else
+					skb->ip_summed = CHECKSUM_NONE;
+
+				skb_trim(skb, skb->len - 4); /* remove fcs */
+				skb->truesize = size + sizeof(struct sk_buff);
+
+				return 1;
+			}
+
+			ax_skb = skb_clone(skb, GFP_ATOMIC);
+			if (unlikely(!ax_skb)) {
+				netdev_warn(dev->net, "Error allocating skb");
+				return 0;
+			}
+
+			ax_skb->len = size;
+			ax_skb->data = packet;
+			skb_set_tail_pointer(ax_skb, size);
+
+			if (pdata->use_rx_csum)
+				smsc75xx_rx_csum_offload(ax_skb, rx_cmd_a,
+					rx_cmd_b);
+			else
+				ax_skb->ip_summed = CHECKSUM_NONE;
+
+			skb_trim(ax_skb, ax_skb->len - 4); /* remove fcs */
+			ax_skb->truesize = size + sizeof(struct sk_buff);
+
+			usbnet_skb_return(dev, ax_skb);
+		}
+
+		skb_pull(skb, size);
+
+		/* padding bytes before the next frame starts */
+		if (skb->len)
+			skb_pull(skb, align_count);
+	}
+
+	if (unlikely(skb->len < 0)) {
+		netdev_warn(dev->net, "invalid rx length<0 %d", skb->len);
+		return 0;
+	}
+
+	return 1;
+}
+
+static struct sk_buff *smsc75xx_tx_fixup(struct usbnet *dev,
+					 struct sk_buff *skb, gfp_t flags)
+{
+	u32 tx_cmd_a, tx_cmd_b;
+
+	skb_linearize(skb);
+
+	if (skb_headroom(skb) < SMSC75XX_TX_OVERHEAD) {
+		struct sk_buff *skb2 =
+			skb_copy_expand(skb, SMSC75XX_TX_OVERHEAD, 0, flags);
+		dev_kfree_skb_any(skb);
+		skb = skb2;
+		if (!skb)
+			return NULL;
+	}
+
+	tx_cmd_a = (u32)(skb->len & TX_CMD_A_LEN) | TX_CMD_A_FCS;
+
+	if (skb->ip_summed == CHECKSUM_PARTIAL)
+		tx_cmd_a |= TX_CMD_A_IPE | TX_CMD_A_TPE;
+
+	if (skb_is_gso(skb)) {
+		u16 mss = max(skb_shinfo(skb)->gso_size, TX_MSS_MIN);
+		tx_cmd_b = (mss << TX_CMD_B_MSS_SHIFT) & TX_CMD_B_MSS;
+
+		tx_cmd_a |= TX_CMD_A_LSO;
+	} else {
+		tx_cmd_b = 0;
+	}
+
+	skb_push(skb, 4);
+	cpu_to_le32s(&tx_cmd_b);
+	memcpy(skb->data, &tx_cmd_b, 4);
+
+	skb_push(skb, 4);
+	cpu_to_le32s(&tx_cmd_a);
+	memcpy(skb->data, &tx_cmd_a, 4);
+
+	return skb;
+}
+
+static const struct driver_info smsc75xx_info = {
+	.description	= "smsc75xx USB 2.0 Gigabit Ethernet",
+	.bind		= smsc75xx_bind,
+	.unbind		= smsc75xx_unbind,
+	.link_reset	= smsc75xx_link_reset,
+	.reset		= smsc75xx_reset,
+	.rx_fixup	= smsc75xx_rx_fixup,
+	.tx_fixup	= smsc75xx_tx_fixup,
+	.status		= smsc75xx_status,
+	.flags		= FLAG_ETHER | FLAG_SEND_ZLP,
+};
+
+static const struct usb_device_id products[] = {
+	{
+		/* SMSC7500 USB Gigabit Ethernet Device */
+		USB_DEVICE(USB_VENDOR_ID_SMSC, USB_PRODUCT_ID_LAN7500),
+		.driver_info = (unsigned long) &smsc75xx_info,
+	},
+	{
+		/* SMSC7500 USB Gigabit Ethernet Device */
+		USB_DEVICE(USB_VENDOR_ID_SMSC, USB_PRODUCT_ID_LAN7505),
+		.driver_info = (unsigned long) &smsc75xx_info,
+	},
+	{ },		/* END */
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver smsc75xx_driver = {
+	.name		= SMSC_CHIPNAME,
+	.id_table	= products,
+	.probe		= usbnet_probe,
+	.suspend	= usbnet_suspend,
+	.resume		= usbnet_resume,
+	.disconnect	= usbnet_disconnect,
+};
+
+static int __init smsc75xx_init(void)
+{
+	return usb_register(&smsc75xx_driver);
+}
+module_init(smsc75xx_init);
+
+static void __exit smsc75xx_exit(void)
+{
+	usb_deregister(&smsc75xx_driver);
+}
+module_exit(smsc75xx_exit);
+
+MODULE_AUTHOR("Nancy Lin");
+MODULE_AUTHOR("Steve Glendinning <steve.glendinning@smsc.com>");
+MODULE_DESCRIPTION("SMSC75XX USB 2.0 Gigabit Ethernet Devices");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/smsc75xx.h b/drivers/net/usb/smsc75xx.h
new file mode 100644
index 000000000000..16e98c778344
--- /dev/null
+++ b/drivers/net/usb/smsc75xx.h
@@ -0,0 +1,421 @@
+ /***************************************************************************
+ *
+ * Copyright (C) 2007-2010 SMSC
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ *****************************************************************************/
+
+#ifndef _SMSC75XX_H
+#define _SMSC75XX_H
+
+/* Tx command words */
+#define TX_CMD_A_LSO			(0x08000000)
+#define TX_CMD_A_IPE			(0x04000000)
+#define TX_CMD_A_TPE			(0x02000000)
+#define TX_CMD_A_IVTG			(0x01000000)
+#define TX_CMD_A_RVTG			(0x00800000)
+#define TX_CMD_A_FCS			(0x00400000)
+#define TX_CMD_A_LEN			(0x000FFFFF)
+
+#define TX_CMD_B_MSS			(0x3FFF0000)
+#define TX_CMD_B_MSS_SHIFT		(16)
+#define TX_MSS_MIN			((u16)8)
+#define TX_CMD_B_VTAG			(0x0000FFFF)
+
+/* Rx command words */
+#define RX_CMD_A_ICE			(0x80000000)
+#define RX_CMD_A_TCE			(0x40000000)
+#define RX_CMD_A_IPV			(0x20000000)
+#define RX_CMD_A_PID			(0x18000000)
+#define RX_CMD_A_PID_NIP		(0x00000000)
+#define RX_CMD_A_PID_TCP		(0x08000000)
+#define RX_CMD_A_PID_UDP		(0x10000000)
+#define RX_CMD_A_PID_PP			(0x18000000)
+#define RX_CMD_A_PFF			(0x04000000)
+#define RX_CMD_A_BAM			(0x02000000)
+#define RX_CMD_A_MAM			(0x01000000)
+#define RX_CMD_A_FVTG			(0x00800000)
+#define RX_CMD_A_RED			(0x00400000)
+#define RX_CMD_A_RWT			(0x00200000)
+#define RX_CMD_A_RUNT			(0x00100000)
+#define RX_CMD_A_LONG			(0x00080000)
+#define RX_CMD_A_RXE			(0x00040000)
+#define RX_CMD_A_DRB			(0x00020000)
+#define RX_CMD_A_FCS			(0x00010000)
+#define RX_CMD_A_UAM			(0x00008000)
+#define RX_CMD_A_LCSM			(0x00004000)
+#define RX_CMD_A_LEN			(0x00003FFF)
+
+#define RX_CMD_B_CSUM			(0xFFFF0000)
+#define RX_CMD_B_CSUM_SHIFT		(16)
+#define RX_CMD_B_VTAG			(0x0000FFFF)
+
+/* SCSRs */
+#define ID_REV				(0x0000)
+
+#define FPGA_REV			(0x0004)
+
+#define BOND_CTL			(0x0008)
+
+#define INT_STS				(0x000C)
+#define INT_STS_RDFO_INT		(0x00400000)
+#define INT_STS_TXE_INT			(0x00200000)
+#define INT_STS_MACRTO_INT		(0x00100000)
+#define INT_STS_TX_DIS_INT		(0x00080000)
+#define INT_STS_RX_DIS_INT		(0x00040000)
+#define INT_STS_PHY_INT_		(0x00020000)
+#define INT_STS_MAC_ERR_INT		(0x00008000)
+#define INT_STS_TDFU			(0x00004000)
+#define INT_STS_TDFO			(0x00002000)
+#define INT_STS_GPIOS			(0x00000FFF)
+#define INT_STS_CLEAR_ALL		(0xFFFFFFFF)
+
+#define HW_CFG				(0x0010)
+#define HW_CFG_SMDET_STS		(0x00008000)
+#define HW_CFG_SMDET_EN			(0x00004000)
+#define HW_CFG_EEM			(0x00002000)
+#define HW_CFG_RST_PROTECT		(0x00001000)
+#define HW_CFG_PORT_SWAP		(0x00000800)
+#define HW_CFG_PHY_BOOST		(0x00000600)
+#define HW_CFG_PHY_BOOST_NORMAL		(0x00000000)
+#define HW_CFG_PHY_BOOST_4		(0x00002000)
+#define HW_CFG_PHY_BOOST_8		(0x00004000)
+#define HW_CFG_PHY_BOOST_12		(0x00006000)
+#define HW_CFG_LEDB			(0x00000100)
+#define HW_CFG_BIR			(0x00000080)
+#define HW_CFG_SBP			(0x00000040)
+#define HW_CFG_IME			(0x00000020)
+#define HW_CFG_MEF			(0x00000010)
+#define HW_CFG_ETC			(0x00000008)
+#define HW_CFG_BCE			(0x00000004)
+#define HW_CFG_LRST			(0x00000002)
+#define HW_CFG_SRST			(0x00000001)
+
+#define PMT_CTL				(0x0014)
+#define PMT_CTL_PHY_PWRUP		(0x00000400)
+#define PMT_CTL_RES_CLR_WKP_EN		(0x00000100)
+#define PMT_CTL_DEV_RDY			(0x00000080)
+#define PMT_CTL_SUS_MODE		(0x00000060)
+#define PMT_CTL_SUS_MODE_0		(0x00000000)
+#define PMT_CTL_SUS_MODE_1		(0x00000020)
+#define PMT_CTL_SUS_MODE_2		(0x00000040)
+#define PMT_CTL_SUS_MODE_3		(0x00000060)
+#define PMT_CTL_PHY_RST			(0x00000010)
+#define PMT_CTL_WOL_EN			(0x00000008)
+#define PMT_CTL_ED_EN			(0x00000004)
+#define PMT_CTL_WUPS			(0x00000003)
+#define PMT_CTL_WUPS_NO			(0x00000000)
+#define PMT_CTL_WUPS_ED			(0x00000001)
+#define PMT_CTL_WUPS_WOL		(0x00000002)
+#define PMT_CTL_WUPS_MULTI		(0x00000003)
+
+#define LED_GPIO_CFG			(0x0018)
+#define LED_GPIO_CFG_LED2_FUN_SEL	(0x80000000)
+#define LED_GPIO_CFG_LED10_FUN_SEL	(0x40000000)
+#define LED_GPIO_CFG_LEDGPIO_EN		(0x0000F000)
+#define LED_GPIO_CFG_LEDGPIO_EN_0	(0x00001000)
+#define LED_GPIO_CFG_LEDGPIO_EN_1	(0x00002000)
+#define LED_GPIO_CFG_LEDGPIO_EN_2	(0x00004000)
+#define LED_GPIO_CFG_LEDGPIO_EN_3	(0x00008000)
+#define LED_GPIO_CFG_GPBUF		(0x00000F00)
+#define LED_GPIO_CFG_GPBUF_0		(0x00000100)
+#define LED_GPIO_CFG_GPBUF_1		(0x00000200)
+#define LED_GPIO_CFG_GPBUF_2		(0x00000400)
+#define LED_GPIO_CFG_GPBUF_3		(0x00000800)
+#define LED_GPIO_CFG_GPDIR		(0x000000F0)
+#define LED_GPIO_CFG_GPDIR_0		(0x00000010)
+#define LED_GPIO_CFG_GPDIR_1		(0x00000020)
+#define LED_GPIO_CFG_GPDIR_2		(0x00000040)
+#define LED_GPIO_CFG_GPDIR_3		(0x00000080)
+#define LED_GPIO_CFG_GPDATA		(0x0000000F)
+#define LED_GPIO_CFG_GPDATA_0		(0x00000001)
+#define LED_GPIO_CFG_GPDATA_1		(0x00000002)
+#define LED_GPIO_CFG_GPDATA_2		(0x00000004)
+#define LED_GPIO_CFG_GPDATA_3		(0x00000008)
+
+#define GPIO_CFG			(0x001C)
+#define GPIO_CFG_SHIFT			(24)
+#define GPIO_CFG_GPEN			(0xFF000000)
+#define GPIO_CFG_GPBUF			(0x00FF0000)
+#define GPIO_CFG_GPDIR			(0x0000FF00)
+#define GPIO_CFG_GPDATA			(0x000000FF)
+
+#define GPIO_WAKE			(0x0020)
+#define GPIO_WAKE_PHY_LINKUP_EN		(0x80000000)
+#define GPIO_WAKE_POL			(0x0FFF0000)
+#define GPIO_WAKE_POL_SHIFT		(16)
+#define GPIO_WAKE_WK			(0x00000FFF)
+
+#define DP_SEL				(0x0024)
+#define DP_SEL_DPRDY			(0x80000000)
+#define DP_SEL_RSEL			(0x0000000F)
+#define DP_SEL_URX			(0x00000000)
+#define DP_SEL_VHF			(0x00000001)
+#define DP_SEL_VHF_HASH_LEN		(16)
+#define DP_SEL_VHF_VLAN_LEN		(128)
+#define DP_SEL_LSO_HEAD			(0x00000002)
+#define DP_SEL_FCT_RX			(0x00000003)
+#define DP_SEL_FCT_TX			(0x00000004)
+#define DP_SEL_DESCRIPTOR		(0x00000005)
+#define DP_SEL_WOL			(0x00000006)
+
+#define DP_CMD				(0x0028)
+#define DP_CMD_WRITE			(0x01)
+#define DP_CMD_READ			(0x00)
+
+#define DP_ADDR				(0x002C)
+
+#define DP_DATA				(0x0030)
+
+#define BURST_CAP			(0x0034)
+#define BURST_CAP_MASK			(0x0000000F)
+
+#define INT_EP_CTL			(0x0038)
+#define INT_EP_CTL_INTEP_ON		(0x80000000)
+#define INT_EP_CTL_RDFO_EN		(0x00400000)
+#define INT_EP_CTL_TXE_EN		(0x00200000)
+#define INT_EP_CTL_MACROTO_EN		(0x00100000)
+#define INT_EP_CTL_TX_DIS_EN		(0x00080000)
+#define INT_EP_CTL_RX_DIS_EN		(0x00040000)
+#define INT_EP_CTL_PHY_EN_		(0x00020000)
+#define INT_EP_CTL_MAC_ERR_EN		(0x00008000)
+#define INT_EP_CTL_TDFU_EN		(0x00004000)
+#define INT_EP_CTL_TDFO_EN		(0x00002000)
+#define INT_EP_CTL_RX_FIFO_EN		(0x00001000)
+#define INT_EP_CTL_GPIOX_EN		(0x00000FFF)
+
+#define BULK_IN_DLY			(0x003C)
+#define BULK_IN_DLY_MASK		(0xFFFF)
+
+#define E2P_CMD				(0x0040)
+#define E2P_CMD_BUSY			(0x80000000)
+#define E2P_CMD_MASK			(0x70000000)
+#define E2P_CMD_READ			(0x00000000)
+#define E2P_CMD_EWDS			(0x10000000)
+#define E2P_CMD_EWEN			(0x20000000)
+#define E2P_CMD_WRITE			(0x30000000)
+#define E2P_CMD_WRAL			(0x40000000)
+#define E2P_CMD_ERASE			(0x50000000)
+#define E2P_CMD_ERAL			(0x60000000)
+#define E2P_CMD_RELOAD			(0x70000000)
+#define E2P_CMD_TIMEOUT			(0x00000400)
+#define E2P_CMD_LOADED			(0x00000200)
+#define E2P_CMD_ADDR			(0x000001FF)
+
+#define MAX_EEPROM_SIZE			(512)
+
+#define E2P_DATA			(0x0044)
+#define E2P_DATA_MASK_			(0x000000FF)
+
+#define RFE_CTL				(0x0060)
+#define RFE_CTL_TCPUDP_CKM		(0x00001000)
+#define RFE_CTL_IP_CKM			(0x00000800)
+#define RFE_CTL_AB			(0x00000400)
+#define RFE_CTL_AM			(0x00000200)
+#define RFE_CTL_AU			(0x00000100)
+#define RFE_CTL_VS			(0x00000080)
+#define RFE_CTL_UF			(0x00000040)
+#define RFE_CTL_VF			(0x00000020)
+#define RFE_CTL_SPF			(0x00000010)
+#define RFE_CTL_MHF			(0x00000008)
+#define RFE_CTL_DHF			(0x00000004)
+#define RFE_CTL_DPF			(0x00000002)
+#define RFE_CTL_RST_RF			(0x00000001)
+
+#define VLAN_TYPE			(0x0064)
+#define VLAN_TYPE_MASK			(0x0000FFFF)
+
+#define FCT_RX_CTL			(0x0090)
+#define FCT_RX_CTL_EN			(0x80000000)
+#define FCT_RX_CTL_RST			(0x40000000)
+#define FCT_RX_CTL_SBF			(0x02000000)
+#define FCT_RX_CTL_OVERFLOW		(0x01000000)
+#define FCT_RX_CTL_FRM_DROP		(0x00800000)
+#define FCT_RX_CTL_RX_NOT_EMPTY		(0x00400000)
+#define FCT_RX_CTL_RX_EMPTY		(0x00200000)
+#define FCT_RX_CTL_RX_DISABLED		(0x00100000)
+#define FCT_RX_CTL_RXUSED		(0x0000FFFF)
+
+#define FCT_TX_CTL			(0x0094)
+#define FCT_TX_CTL_EN			(0x80000000)
+#define FCT_TX_CTL_RST			(0x40000000)
+#define FCT_TX_CTL_TX_NOT_EMPTY		(0x00400000)
+#define FCT_TX_CTL_TX_EMPTY		(0x00200000)
+#define FCT_TX_CTL_TX_DISABLED		(0x00100000)
+#define FCT_TX_CTL_TXUSED		(0x0000FFFF)
+
+#define FCT_RX_FIFO_END			(0x0098)
+#define FCT_RX_FIFO_END_MASK		(0x0000007F)
+
+#define FCT_TX_FIFO_END			(0x009C)
+#define FCT_TX_FIFO_END_MASK		(0x0000003F)
+
+#define FCT_FLOW			(0x00A0)
+#define FCT_FLOW_THRESHOLD_OFF		(0x00007F00)
+#define FCT_FLOW_THRESHOLD_OFF_SHIFT	(8)
+#define FCT_FLOW_THRESHOLD_ON		(0x0000007F)
+
+/* MAC CSRs */
+#define MAC_CR				(0x100)
+#define MAC_CR_ADP			(0x00002000)
+#define MAC_CR_ADD			(0x00001000)
+#define MAC_CR_ASD			(0x00000800)
+#define MAC_CR_INT_LOOP			(0x00000400)
+#define MAC_CR_BOLMT			(0x000000C0)
+#define MAC_CR_FDPX			(0x00000008)
+#define MAC_CR_CFG			(0x00000006)
+#define MAC_CR_CFG_10			(0x00000000)
+#define MAC_CR_CFG_100			(0x00000002)
+#define MAC_CR_CFG_1000			(0x00000004)
+#define MAC_CR_RST			(0x00000001)
+
+#define MAC_RX				(0x104)
+#define MAC_RX_MAX_SIZE			(0x3FFF0000)
+#define MAC_RX_MAX_SIZE_SHIFT		(16)
+#define MAC_RX_FCS_STRIP		(0x00000010)
+#define MAC_RX_FSE			(0x00000004)
+#define MAC_RX_RXD			(0x00000002)
+#define MAC_RX_RXEN			(0x00000001)
+
+#define MAC_TX				(0x108)
+#define MAC_TX_BFCS			(0x00000004)
+#define MAC_TX_TXD			(0x00000002)
+#define MAC_TX_TXEN			(0x00000001)
+
+#define FLOW				(0x10C)
+#define FLOW_FORCE_FC			(0x80000000)
+#define FLOW_TX_FCEN			(0x40000000)
+#define FLOW_RX_FCEN			(0x20000000)
+#define FLOW_FPF			(0x10000000)
+#define FLOW_PAUSE_TIME			(0x0000FFFF)
+
+#define RAND_SEED			(0x110)
+#define RAND_SEED_MASK			(0x0000FFFF)
+
+#define ERR_STS				(0x114)
+#define ERR_STS_FCS_ERR			(0x00000100)
+#define ERR_STS_LFRM_ERR		(0x00000080)
+#define ERR_STS_RUNT_ERR		(0x00000040)
+#define ERR_STS_COLLISION_ERR		(0x00000010)
+#define ERR_STS_ALIGN_ERR		(0x00000008)
+#define ERR_STS_URUN_ERR		(0x00000004)
+
+#define RX_ADDRH			(0x118)
+#define RX_ADDRH_MASK			(0x0000FFFF)
+
+#define RX_ADDRL			(0x11C)
+
+#define MII_ACCESS			(0x120)
+#define MII_ACCESS_PHY_ADDR		(0x0000F800)
+#define MII_ACCESS_PHY_ADDR_SHIFT	(11)
+#define MII_ACCESS_REG_ADDR		(0x000007C0)
+#define MII_ACCESS_REG_ADDR_SHIFT	(6)
+#define MII_ACCESS_READ			(0x00000000)
+#define MII_ACCESS_WRITE		(0x00000002)
+#define MII_ACCESS_BUSY			(0x00000001)
+
+#define MII_DATA			(0x124)
+#define MII_DATA_MASK			(0x0000FFFF)
+
+#define WUCSR				(0x140)
+#define WUCSR_PFDA_FR			(0x00000080)
+#define WUCSR_WUFR			(0x00000040)
+#define WUCSR_MPR			(0x00000020)
+#define WUCSR_BCAST_FR			(0x00000010)
+#define WUCSR_PFDA_EN			(0x00000008)
+#define WUCSR_WUEN			(0x00000004)
+#define WUCSR_MPEN			(0x00000002)
+#define WUCSR_BCST_EN			(0x00000001)
+
+#define WUF_CFGX			(0x144)
+#define WUF_CFGX_EN			(0x80000000)
+#define WUF_CFGX_ATYPE			(0x03000000)
+#define WUF_CFGX_ATYPE_UNICAST		(0x00000000)
+#define WUF_CFGX_ATYPE_MULTICAST	(0x02000000)
+#define WUF_CFGX_ATYPE_ALL		(0x03000000)
+#define WUF_CFGX_PATTERN_OFFSET		(0x007F0000)
+#define WUF_CFGX_PATTERN_OFFSET_SHIFT	(16)
+#define WUF_CFGX_CRC16			(0x0000FFFF)
+#define WUF_NUM				(8)
+
+#define WUF_MASKX			(0x170)
+#define WUF_MASKX_AVALID		(0x80000000)
+#define WUF_MASKX_ATYPE			(0x40000000)
+
+#define ADDR_FILTX			(0x300)
+#define ADDR_FILTX_FB_VALID		(0x80000000)
+#define ADDR_FILTX_FB_TYPE		(0x40000000)
+#define ADDR_FILTX_FB_ADDRHI		(0x0000FFFF)
+#define ADDR_FILTX_SB_ADDRLO		(0xFFFFFFFF)
+
+#define WUCSR2				(0x500)
+#define WUCSR2_NS_RCD			(0x00000040)
+#define WUCSR2_ARP_RCD			(0x00000020)
+#define WUCSR2_TCPSYN_RCD		(0x00000010)
+#define WUCSR2_NS_OFFLOAD		(0x00000004)
+#define WUCSR2_ARP_OFFLOAD		(0x00000002)
+#define WUCSR2_TCPSYN_OFFLOAD		(0x00000001)
+
+#define WOL_FIFO_STS			(0x504)
+
+#define IPV6_ADDRX			(0x510)
+
+#define IPV4_ADDRX			(0x590)
+
+
+/* Vendor-specific PHY Definitions */
+
+/* Mode Control/Status Register */
+#define PHY_MODE_CTRL_STS		(17)
+#define MODE_CTRL_STS_EDPWRDOWN		((u16)0x2000)
+#define MODE_CTRL_STS_ENERGYON		((u16)0x0002)
+
+#define PHY_INT_SRC			(29)
+#define PHY_INT_SRC_ENERGY_ON		((u16)0x0080)
+#define PHY_INT_SRC_ANEG_COMP		((u16)0x0040)
+#define PHY_INT_SRC_REMOTE_FAULT	((u16)0x0020)
+#define PHY_INT_SRC_LINK_DOWN		((u16)0x0010)
+
+#define PHY_INT_MASK			(30)
+#define PHY_INT_MASK_ENERGY_ON		((u16)0x0080)
+#define PHY_INT_MASK_ANEG_COMP		((u16)0x0040)
+#define PHY_INT_MASK_REMOTE_FAULT	((u16)0x0020)
+#define PHY_INT_MASK_LINK_DOWN		((u16)0x0010)
+#define PHY_INT_MASK_DEFAULT		(PHY_INT_MASK_ANEG_COMP | \
+					 PHY_INT_MASK_LINK_DOWN)
+
+#define PHY_SPECIAL			(31)
+#define PHY_SPECIAL_SPD			((u16)0x001C)
+#define PHY_SPECIAL_SPD_10HALF		((u16)0x0004)
+#define PHY_SPECIAL_SPD_10FULL		((u16)0x0014)
+#define PHY_SPECIAL_SPD_100HALF		((u16)0x0008)
+#define PHY_SPECIAL_SPD_100FULL		((u16)0x0018)
+
+/* USB Vendor Requests */
+#define USB_VENDOR_REQUEST_WRITE_REGISTER	0xA0
+#define USB_VENDOR_REQUEST_READ_REGISTER	0xA1
+#define USB_VENDOR_REQUEST_GET_STATS		0xA2
+
+/* Interrupt Endpoint status word bitfields */
+#define INT_ENP_RDFO_INT		((u32)BIT(22))
+#define INT_ENP_TXE_INT			((u32)BIT(21))
+#define INT_ENP_TX_DIS_INT		((u32)BIT(19))
+#define INT_ENP_RX_DIS_INT		((u32)BIT(18))
+#define INT_ENP_PHY_INT			((u32)BIT(17))
+#define INT_ENP_MAC_ERR_INT		((u32)BIT(15))
+#define INT_ENP_RX_FIFO_DATA_INT	((u32)BIT(12))
+
+#endif /* _SMSC75XX_H */
diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index df9179a1c93b..d222d7e25273 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -709,6 +709,8 @@ static void smsc95xx_start_rx_path(struct usbnet *dev)
 
 static int smsc95xx_phy_initialize(struct usbnet *dev)
 {
+	int bmcr, timeout = 0;
+
 	/* Initialize MII structure */
 	dev->mii.dev = dev->net;
 	dev->mii.mdio_read = smsc95xx_mdio_read;
@@ -717,7 +719,20 @@ static int smsc95xx_phy_initialize(struct usbnet *dev)
 	dev->mii.reg_num_mask = 0x1f;
 	dev->mii.phy_id = SMSC95XX_INTERNAL_PHY_ID;
 
+	/* reset phy and wait for reset to complete */
 	smsc95xx_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
+
+	do {
+		msleep(10);
+		bmcr = smsc95xx_mdio_read(dev->net, dev->mii.phy_id, MII_BMCR);
+		timeout++;
+	} while ((bmcr & MII_BMCR) && (timeout < 100));
+
+	if (timeout >= 100) {
+		netdev_warn(dev->net, "timeout on PHY Reset");
+		return -EIO;
+	}
+
 	smsc95xx_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
 		ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP |
 		ADVERTISE_PAUSE_ASYM);
diff --git a/drivers/net/wan/cosa.c b/drivers/net/wan/cosa.c
index b36bf96eb502..f0bd70fb650c 100644
--- a/drivers/net/wan/cosa.c
+++ b/drivers/net/wan/cosa.c
@@ -811,7 +811,7 @@ static ssize_t cosa_read(struct file *file,
 	cosa_enable_rx(chan);
 	spin_lock_irqsave(&cosa->lock, flags);
 	add_wait_queue(&chan->rxwaitq, &wait);
-	while(!chan->rx_status) {
+	while (!chan->rx_status) {
 		current->state = TASK_INTERRUPTIBLE;
 		spin_unlock_irqrestore(&cosa->lock, flags);
 		schedule();
@@ -896,7 +896,7 @@ static ssize_t cosa_write(struct file *file,
 
 	spin_lock_irqsave(&cosa->lock, flags);
 	add_wait_queue(&chan->txwaitq, &wait);
-	while(!chan->tx_status) {
+	while (!chan->tx_status) {
 		current->state = TASK_INTERRUPTIBLE;
 		spin_unlock_irqrestore(&cosa->lock, flags);
 		schedule();
@@ -1153,7 +1153,7 @@ static int cosa_ioctl_common(struct cosa_data *cosa,
 	struct channel_data *channel, unsigned int cmd, unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
-	switch(cmd) {
+	switch (cmd) {
 	case COSAIORSET:	/* Reset the device */
 		if (!capable(CAP_NET_ADMIN))
 			return -EACCES;
@@ -1704,7 +1704,7 @@ static inline void tx_interrupt(struct cosa_data *cosa, int status)
 			spin_unlock_irqrestore(&cosa->lock, flags);
 			return;
 		}
-		while(1) {
+		while (1) {
 			cosa->txchan++;
 			i++;
 			if (cosa->txchan >= cosa->nchannels)
@@ -2010,7 +2010,7 @@ again:
 static void debug_status_in(struct cosa_data *cosa, int status)
 {
 	char *s;
-	switch(status & SR_CMD_FROM_SRP_MASK) {
+	switch (status & SR_CMD_FROM_SRP_MASK) {
 	case SR_UP_REQUEST:
 		s = "RX_REQ";
 		break;
diff --git a/drivers/net/wan/hdlc_cisco.c b/drivers/net/wan/hdlc_cisco.c
index f1bff98acd1f..1ceccf1ca6c7 100644
--- a/drivers/net/wan/hdlc_cisco.c
+++ b/drivers/net/wan/hdlc_cisco.c
@@ -141,7 +141,7 @@ static __be16 cisco_type_trans(struct sk_buff *skb, struct net_device *dev)
 	    data->address != CISCO_UNICAST)
 		return cpu_to_be16(ETH_P_HDLC);
 
-	switch(data->protocol) {
+	switch (data->protocol) {
 	case cpu_to_be16(ETH_P_IP):
 	case cpu_to_be16(ETH_P_IPX):
 	case cpu_to_be16(ETH_P_IPV6):
@@ -190,7 +190,7 @@ static int cisco_rx(struct sk_buff *skb)
 		cisco_data = (struct cisco_packet*)(skb->data + sizeof
 						    (struct hdlc_header));
 
-		switch(ntohl (cisco_data->type)) {
+		switch (ntohl (cisco_data->type)) {
 		case CISCO_ADDR_REQ: /* Stolen from syncppp.c :-) */
 			in_dev = dev->ip_ptr;
 			addr = 0;
@@ -245,8 +245,8 @@ static int cisco_rx(struct sk_buff *skb)
 
 			dev_kfree_skb_any(skb);
 			return NET_RX_SUCCESS;
-		} /* switch(keepalive type) */
-	} /* switch(protocol) */
+		} /* switch (keepalive type) */
+	} /* switch (protocol) */
 
 	printk(KERN_INFO "%s: Unsupported protocol %x\n", dev->name,
 	       ntohs(data->protocol));
diff --git a/drivers/net/wan/hdlc_x25.c b/drivers/net/wan/hdlc_x25.c
index aa9248f8eb1a..6e1ca256effd 100644
--- a/drivers/net/wan/hdlc_x25.c
+++ b/drivers/net/wan/hdlc_x25.c
@@ -202,10 +202,10 @@ static int x25_ioctl(struct net_device *dev, struct ifreq *ifr)
 		return 0; /* return protocol only, no settable parameters */
 
 	case IF_PROTO_X25:
-		if(!capable(CAP_NET_ADMIN))
+		if (!capable(CAP_NET_ADMIN))
 			return -EPERM;
 
-		if(dev->flags & IFF_UP)
+		if (dev->flags & IFF_UP)
 			return -EBUSY;
 
 		result=hdlc->attach(dev, ENCODING_NRZ,PARITY_CRC16_PR1_CCITT);
diff --git a/drivers/net/wimax/i2400m/fw.c b/drivers/net/wimax/i2400m/fw.c
index e803a7dc6502..25c24f0368d8 100644
--- a/drivers/net/wimax/i2400m/fw.c
+++ b/drivers/net/wimax/i2400m/fw.c
@@ -612,7 +612,7 @@ ssize_t i2400m_bm_cmd(struct i2400m *i2400m,
 		goto error_wait_for_ack;
 	}
 	rx_bytes = result;
-	/* verify the ack and read more if neccessary [result is the
+	/* verify the ack and read more if necessary [result is the
 	 * final amount of bytes we get in the ack]  */
 	result = __i2400m_bm_ack_verify(i2400m, opcode, ack, ack_size, flags);
 	if (result < 0)
diff --git a/drivers/net/wimax/i2400m/i2400m.h b/drivers/net/wimax/i2400m/i2400m.h
index 04df9bbe340f..820b128705ec 100644
--- a/drivers/net/wimax/i2400m/i2400m.h
+++ b/drivers/net/wimax/i2400m/i2400m.h
@@ -627,7 +627,7 @@ enum i2400m_bm_cmd_flags {
  * @I2400M_BRI_NO_REBOOT: Do not reboot the device and proceed
  *     directly to wait for a reboot barker from the device.
  * @I2400M_BRI_MAC_REINIT: We need to reinitialize the boot
- *     rom after reading the MAC adress. This is quite a dirty hack,
+ *     rom after reading the MAC address. This is quite a dirty hack,
  *     if you ask me -- the device requires the bootrom to be
  *     intialized after reading the MAC address.
  */
diff --git a/drivers/net/wimax/i2400m/sdio.c b/drivers/net/wimax/i2400m/sdio.c
index 76a50ac02ebb..14f876b1358b 100644
--- a/drivers/net/wimax/i2400m/sdio.c
+++ b/drivers/net/wimax/i2400m/sdio.c
@@ -304,7 +304,7 @@ error_kzalloc:
  *
  * The device will be fully reset internally, but won't be
  * disconnected from the bus (so no reenumeration will
- * happen). Firmware upload will be neccessary.
+ * happen). Firmware upload will be necessary.
  *
  * The device will send a reboot barker that will trigger the driver
  * to reinitialize the state via __i2400m_dev_reset_handle.
@@ -314,7 +314,7 @@ error_kzalloc:
  *
  * The device will be fully reset internally, disconnected from the
  * bus an a reenumeration will happen. Firmware upload will be
- * neccessary. Thus, we don't do any locking or struct
+ * necessary. Thus, we don't do any locking or struct
  * reinitialization, as we are going to be fully disconnected and
  * reenumerated.
  *
diff --git a/drivers/net/wimax/i2400m/usb.c b/drivers/net/wimax/i2400m/usb.c
index 98f4f8c5fb68..99f04c475898 100644
--- a/drivers/net/wimax/i2400m/usb.c
+++ b/drivers/net/wimax/i2400m/usb.c
@@ -246,7 +246,7 @@ error_kzalloc:
  *
  * The device will be fully reset internally, but won't be
  * disconnected from the USB bus (so no reenumeration will
- * happen). Firmware upload will be neccessary.
+ * happen). Firmware upload will be necessary.
  *
  * The device will send a reboot barker in the notification endpoint
  * that will trigger the driver to reinitialize the state
@@ -257,7 +257,7 @@ error_kzalloc:
  *
  * The device will be fully reset internally, disconnected from the
  * USB bus an a reenumeration will happen. Firmware upload will be
- * neccessary. Thus, we don't do any locking or struct
+ * necessary. Thus, we don't do any locking or struct
  * reinitialization, as we are going to be fully disconnected and
  * reenumerated.
  *
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index 698d5672a070..dc5018a6d9ed 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -5255,7 +5255,8 @@ static int set_wep_key(struct airo_info *ai, u16 index, const char *key,
 	WepKeyRid wkr;
 	int rc;
 
-	WARN_ON(keylen == 0);
+	if (WARN_ON(keylen == 0))
+		return -1;
 
 	memset(&wkr, 0, sizeof(wkr));
 	wkr.len = cpu_to_le16(sizeof(wkr));
diff --git a/drivers/net/wireless/ath/ar9170/ar9170.h b/drivers/net/wireless/ath/ar9170/ar9170.h
index 8c8ce67971e9..dc662b76a1c8 100644
--- a/drivers/net/wireless/ath/ar9170/ar9170.h
+++ b/drivers/net/wireless/ath/ar9170/ar9170.h
@@ -166,6 +166,7 @@ struct ar9170 {
 	struct ath_common common;
 	struct mutex mutex;
 	enum ar9170_device_state state;
+	bool registered;
 	unsigned long bad_hw_nagger;
 
 	int (*open)(struct ar9170 *);
diff --git a/drivers/net/wireless/ath/ar9170/main.c b/drivers/net/wireless/ath/ar9170/main.c
index a6452af9c6c5..257c734733d1 100644
--- a/drivers/net/wireless/ath/ar9170/main.c
+++ b/drivers/net/wireless/ath/ar9170/main.c
@@ -2512,7 +2512,7 @@ void *ar9170_alloc(size_t priv_size)
 	/*
 	 * this buffer is used for rx stream reconstruction.
 	 * Under heavy load this device (or the transport layer?)
-	 * tends to split the streams into seperate rx descriptors.
+	 * tends to split the streams into separate rx descriptors.
 	 */
 
 	skb = __dev_alloc_skb(AR9170_MAX_RX_BUFFER_SIZE, GFP_KERNEL);
@@ -2701,7 +2701,8 @@ int ar9170_register(struct ar9170 *ar, struct device *pdev)
 	dev_info(pdev, "Atheros AR9170 is registered as '%s'\n",
 		 wiphy_name(ar->hw->wiphy));
 
-	return err;
+	ar->registered = true;
+	return 0;
 
 err_unreg:
 	ieee80211_unregister_hw(ar->hw);
@@ -2712,11 +2713,14 @@ err_out:
 
 void ar9170_unregister(struct ar9170 *ar)
 {
+	if (ar->registered) {
 #ifdef CONFIG_AR9170_LEDS
-	ar9170_unregister_leds(ar);
+		ar9170_unregister_leds(ar);
 #endif /* CONFIG_AR9170_LEDS */
 
-	kfree_skb(ar->rx_failover);
 	ieee80211_unregister_hw(ar->hw);
+	}
+
+	kfree_skb(ar->rx_failover);
 	mutex_destroy(&ar->mutex);
 }
diff --git a/drivers/net/wireless/ath/ar9170/usb.c b/drivers/net/wireless/ath/ar9170/usb.c
index 0f361186b78f..4e30197afff6 100644
--- a/drivers/net/wireless/ath/ar9170/usb.c
+++ b/drivers/net/wireless/ath/ar9170/usb.c
@@ -582,43 +582,6 @@ static int ar9170_usb_upload(struct ar9170_usb *aru, const void *data,
 	return 0;
 }
 
-static int ar9170_usb_request_firmware(struct ar9170_usb *aru)
-{
-	int err = 0;
-
-	err = request_firmware(&aru->firmware, "ar9170.fw",
-			       &aru->udev->dev);
-	if (!err) {
-		aru->init_values = NULL;
-		return 0;
-	}
-
-	if (aru->req_one_stage_fw) {
-		dev_err(&aru->udev->dev, "ar9170.fw firmware file "
-			"not found and is required for this device\n");
-		return -EINVAL;
-	}
-
-	dev_err(&aru->udev->dev, "ar9170.fw firmware file "
-		"not found, trying old firmware...\n");
-
-	err = request_firmware(&aru->init_values, "ar9170-1.fw",
-			       &aru->udev->dev);
-	if (err) {
-		dev_err(&aru->udev->dev, "file with init values not found.\n");
-		return err;
-	}
-
-	err = request_firmware(&aru->firmware, "ar9170-2.fw", &aru->udev->dev);
-	if (err) {
-		release_firmware(aru->init_values);
-		dev_err(&aru->udev->dev, "firmware file not found.\n");
-		return err;
-	}
-
-	return err;
-}
-
 static int ar9170_usb_reset(struct ar9170_usb *aru)
 {
 	int ret, lock = (aru->intf->condition != USB_INTERFACE_BINDING);
@@ -757,6 +720,103 @@ err_out:
 	return err;
 }
 
+static void ar9170_usb_firmware_failed(struct ar9170_usb *aru)
+{
+	struct device *parent = aru->udev->dev.parent;
+
+	/* unbind anything failed */
+	if (parent)
+		down(&parent->sem);
+	device_release_driver(&aru->udev->dev);
+	if (parent)
+		up(&parent->sem);
+}
+
+static void ar9170_usb_firmware_finish(const struct firmware *fw, void *context)
+{
+	struct ar9170_usb *aru = context;
+	int err;
+
+	aru->firmware = fw;
+
+	if (!fw) {
+		dev_err(&aru->udev->dev, "firmware file not found.\n");
+		goto err_freefw;
+	}
+
+	err = ar9170_usb_init_device(aru);
+	if (err)
+		goto err_freefw;
+
+	err = ar9170_usb_open(&aru->common);
+	if (err)
+		goto err_unrx;
+
+	err = ar9170_register(&aru->common, &aru->udev->dev);
+
+	ar9170_usb_stop(&aru->common);
+	if (err)
+		goto err_unrx;
+
+	return;
+
+ err_unrx:
+	ar9170_usb_cancel_urbs(aru);
+
+ err_freefw:
+	ar9170_usb_firmware_failed(aru);
+}
+
+static void ar9170_usb_firmware_inits(const struct firmware *fw,
+				      void *context)
+{
+	struct ar9170_usb *aru = context;
+	int err;
+
+	if (!fw) {
+		dev_err(&aru->udev->dev, "file with init values not found.\n");
+		ar9170_usb_firmware_failed(aru);
+		return;
+	}
+
+	aru->init_values = fw;
+
+	/* ok so we have the init values -- get code for two-stage */
+
+	err = request_firmware_nowait(THIS_MODULE, 1, "ar9170-2.fw",
+				      &aru->udev->dev, GFP_KERNEL, aru,
+				      ar9170_usb_firmware_finish);
+	if (err)
+		ar9170_usb_firmware_failed(aru);
+}
+
+static void ar9170_usb_firmware_step2(const struct firmware *fw, void *context)
+{
+	struct ar9170_usb *aru = context;
+	int err;
+
+	if (fw) {
+		ar9170_usb_firmware_finish(fw, context);
+		return;
+	}
+
+	if (aru->req_one_stage_fw) {
+		dev_err(&aru->udev->dev, "ar9170.fw firmware file "
+			"not found and is required for this device\n");
+		ar9170_usb_firmware_failed(aru);
+		return;
+	}
+
+	dev_err(&aru->udev->dev, "ar9170.fw firmware file "
+		"not found, trying old firmware...\n");
+
+	err = request_firmware_nowait(THIS_MODULE, 1, "ar9170-1.fw",
+				      &aru->udev->dev, GFP_KERNEL, aru,
+				      ar9170_usb_firmware_inits);
+	if (err)
+		ar9170_usb_firmware_failed(aru);
+}
+
 static bool ar9170_requires_one_stage(const struct usb_device_id *id)
 {
 	if (!id->driver_info)
@@ -814,33 +874,9 @@ static int ar9170_usb_probe(struct usb_interface *intf,
 	if (err)
 		goto err_freehw;
 
-	err = ar9170_usb_request_firmware(aru);
-	if (err)
-		goto err_freehw;
-
-	err = ar9170_usb_init_device(aru);
-	if (err)
-		goto err_freefw;
-
-	err = ar9170_usb_open(ar);
-	if (err)
-		goto err_unrx;
-
-	err = ar9170_register(ar, &udev->dev);
-
-	ar9170_usb_stop(ar);
-	if (err)
-		goto err_unrx;
-
-	return 0;
-
-err_unrx:
-	ar9170_usb_cancel_urbs(aru);
-
-err_freefw:
-	release_firmware(aru->init_values);
-	release_firmware(aru->firmware);
-
+	return request_firmware_nowait(THIS_MODULE, 1, "ar9170.fw",
+				       &aru->udev->dev, GFP_KERNEL, aru,
+				       ar9170_usb_firmware_step2);
 err_freehw:
 	usb_set_intfdata(intf, NULL);
 	usb_put_dev(udev);
@@ -860,12 +896,12 @@ static void ar9170_usb_disconnect(struct usb_interface *intf)
 	ar9170_unregister(&aru->common);
 	ar9170_usb_cancel_urbs(aru);
 
-	release_firmware(aru->init_values);
-	release_firmware(aru->firmware);
-
 	usb_put_dev(aru->udev);
 	usb_set_intfdata(intf, NULL);
 	ieee80211_free_hw(aru->common.hw);
+
+	release_firmware(aru->init_values);
+	release_firmware(aru->firmware);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c
index 6a3f4da7fb48..10b52262b232 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.c
+++ b/drivers/net/wireless/ath/ath5k/eeprom.c
@@ -429,8 +429,8 @@ static int ath5k_eeprom_read_modes(struct ath5k_hw *ah, u32 *offset,
 			ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f;
 
 		AR5K_EEPROM_READ(o++, val);
-		ee->ee_i_cal[mode] = (val >> 8) & 0x3f;
-		ee->ee_q_cal[mode] = (val >> 3) & 0x1f;
+		ee->ee_i_cal[mode] = (val >> 5) & 0x3f;
+		ee->ee_q_cal[mode] = val & 0x1f;
 
 		if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_2) {
 			AR5K_EEPROM_READ(o++, val);
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index 72474c0ccaff..eff3323efb4b 100644
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -1386,38 +1386,39 @@ static int ath5k_hw_rf511x_calibrate(struct ath5k_hw *ah,
 		goto done;
 
 	/* Calibration has finished, get the results and re-run */
+
+	/* work around empty results which can apparently happen on 5212 */
 	for (i = 0; i <= 10; i++) {
 		iq_corr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_CORR);
 		i_pwr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_PWR_I);
 		q_pwr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_PWR_Q);
+		ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_CALIBRATE,
+			"iq_corr:%x i_pwr:%x q_pwr:%x", iq_corr, i_pwr, q_pwr);
+		if (i_pwr && q_pwr)
+			break;
 	}
 
 	i_coffd = ((i_pwr >> 1) + (q_pwr >> 1)) >> 7;
 	q_coffd = q_pwr >> 7;
 
-	/* No correction */
-	if (i_coffd == 0 || q_coffd == 0)
+	/* protect against divide by 0 and loss of sign bits */
+	if (i_coffd == 0 || q_coffd < 2)
 		goto done;
 
-	i_coff = ((-iq_corr) / i_coffd);
-
-	/* Boundary check */
-	if (i_coff > 31)
-		i_coff = 31;
-	if (i_coff < -32)
-		i_coff = -32;
+	i_coff = (-iq_corr) / i_coffd;
+	i_coff = clamp(i_coff, -32, 31); /* signed 6 bit */
 
-	q_coff = (((s32)i_pwr / q_coffd) - 128);
+	q_coff = (i_pwr / q_coffd) - 128;
+	q_coff = clamp(q_coff, -16, 15); /* signed 5 bit */
 
-	/* Boundary check */
-	if (q_coff > 15)
-		q_coff = 15;
-	if (q_coff < -16)
-		q_coff = -16;
+	ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_CALIBRATE,
+			"new I:%d Q:%d (i_coffd:%x q_coffd:%x)",
+			i_coff, q_coff, i_coffd, q_coffd);
 
-	/* Commit new I/Q value */
-	AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_ENABLE |
-		((u32)q_coff) | ((u32)i_coff << AR5K_PHY_IQ_CORR_Q_I_COFF_S));
+	/* Commit new I/Q values (set enable bit last to match HAL sources) */
+	AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_Q_I_COFF, i_coff);
+	AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_Q_Q_COFF, q_coff);
+	AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_ENABLE);
 
 	/* Re-enable calibration -if we don't we'll commit
 	 * the same values again and again */
@@ -1873,7 +1874,7 @@ ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode)
 		break;
 	case AR5K_ANTMODE_FIXED_A:
 		def_ant = 1;
-		tx_ant = 0;
+		tx_ant = 1;
 		use_def_for_tx = true;
 		update_def_on_tx = false;
 		use_def_for_rts = true;
@@ -1882,7 +1883,7 @@ ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode)
 		break;
 	case AR5K_ANTMODE_FIXED_B:
 		def_ant = 2;
-		tx_ant = 0;
+		tx_ant = 2;
 		use_def_for_tx = true;
 		update_def_on_tx = false;
 		use_def_for_rts = true;
diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h
index 4cb9c5df9f46..1464f89b249c 100644
--- a/drivers/net/wireless/ath/ath5k/reg.h
+++ b/drivers/net/wireless/ath/ath5k/reg.h
@@ -2187,6 +2187,7 @@
  */
 #define	AR5K_PHY_IQ			0x9920			/* Register Address */
 #define	AR5K_PHY_IQ_CORR_Q_Q_COFF	0x0000001f	/* Mask for q correction info */
+#define	AR5K_PHY_IQ_CORR_Q_Q_COFF_S	0
 #define	AR5K_PHY_IQ_CORR_Q_I_COFF	0x000007e0	/* Mask for i correction info */
 #define	AR5K_PHY_IQ_CORR_Q_I_COFF_S	5
 #define	AR5K_PHY_IQ_CORR_ENABLE		0x00000800	/* Enable i/q correction */
diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c
index a35a7db0fc4c..cbf28e379843 100644
--- a/drivers/net/wireless/ath/ath5k/reset.c
+++ b/drivers/net/wireless/ath/ath5k/reset.c
@@ -851,12 +851,15 @@ static void ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah,
 				AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1,
 				AR5K_INIT_CYCRSSI_THR1);
 
-	/* I/Q correction
-	 * TODO: Per channel i/q infos ? */
-	AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ,
-		AR5K_PHY_IQ_CORR_ENABLE |
-		(ee->ee_i_cal[ee_mode] << AR5K_PHY_IQ_CORR_Q_I_COFF_S) |
-		ee->ee_q_cal[ee_mode]);
+	/* I/Q correction (set enable bit last to match HAL sources) */
+	/* TODO: Per channel i/q infos ? */
+	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) {
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_Q_I_COFF,
+			    ee->ee_i_cal[ee_mode]);
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_Q_Q_COFF,
+			    ee->ee_q_cal[ee_mode]);
+		AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_ENABLE);
+	}
 
 	/* Heavy clipping -disable for now */
 	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_5_1)
@@ -1379,11 +1382,10 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
 		ath5k_hw_set_sleep_clock(ah, true);
 
 	/*
-	 * Disable beacons and reset the register
+	 * Disable beacons and reset the TSF
 	 */
-	AR5K_REG_DISABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE |
-			AR5K_BEACON_RESET_TSF);
-
+	AR5K_REG_DISABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE);
+	ath5k_hw_reset_tsf(ah);
 	return 0;
 }
 
diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c
index ac34a055c713..0e79e58cf4c9 100644
--- a/drivers/net/wireless/ath/ath9k/rc.c
+++ b/drivers/net/wireless/ath/ath9k/rc.c
@@ -1323,7 +1323,7 @@ static void ath_rate_init(void *priv, struct ieee80211_supported_band *sband,
 
 static void ath_rate_update(void *priv, struct ieee80211_supported_band *sband,
 			    struct ieee80211_sta *sta, void *priv_sta,
-			    u32 changed)
+			    u32 changed, enum nl80211_channel_type oper_chan_type)
 {
 	struct ath_softc *sc = priv;
 	struct ath_rate_priv *ath_rc_priv = priv_sta;
@@ -1340,8 +1340,8 @@ static void ath_rate_update(void *priv, struct ieee80211_supported_band *sband,
 		if (sc->sc_ah->opmode != NL80211_IFTYPE_STATION)
 			return;
 
-		if (sc->hw->conf.channel_type == NL80211_CHAN_HT40MINUS ||
-		    sc->hw->conf.channel_type == NL80211_CHAN_HT40PLUS)
+		if (oper_chan_type == NL80211_CHAN_HT40MINUS ||
+		    oper_chan_type == NL80211_CHAN_HT40PLUS)
 			oper_cw40 = true;
 
 		oper_sgi40 = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ?
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 47294f90bbe5..b2c8207f7bc1 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -2258,7 +2258,7 @@ void ath_tx_node_cleanup(struct ath_softc *sc, struct ath_node *an)
 		if (ATH_TXQ_SETUP(sc, i)) {
 			txq = &sc->tx.txq[i];
 
-			spin_lock(&txq->axq_lock);
+			spin_lock_bh(&txq->axq_lock);
 
 			list_for_each_entry_safe(ac,
 					ac_tmp, &txq->axq_acq, list) {
@@ -2279,7 +2279,7 @@ void ath_tx_node_cleanup(struct ath_softc *sc, struct ath_node *an)
 				}
 			}
 
-			spin_unlock(&txq->axq_lock);
+			spin_unlock_bh(&txq->axq_lock);
 		}
 	}
 }
diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c
index 63c2a7ade5fb..5c7aa1b1eb56 100644
--- a/drivers/net/wireless/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/ipw2x00/ipw2200.c
@@ -3177,14 +3177,27 @@ static int ipw_load_firmware(struct ipw_priv *priv, u8 * data, size_t len)
 	int total_nr = 0;
 	int i;
 	struct pci_pool *pool;
-	u32 *virts[CB_NUMBER_OF_ELEMENTS_SMALL];
-	dma_addr_t phys[CB_NUMBER_OF_ELEMENTS_SMALL];
+	void **virts;
+	dma_addr_t *phys;
 
 	IPW_DEBUG_TRACE("<< : \n");
 
+	virts = kmalloc(sizeof(void *) * CB_NUMBER_OF_ELEMENTS_SMALL,
+			GFP_KERNEL);
+	if (!virts)
+		return -ENOMEM;
+
+	phys = kmalloc(sizeof(dma_addr_t) * CB_NUMBER_OF_ELEMENTS_SMALL,
+			GFP_KERNEL);
+	if (!phys) {
+		kfree(virts);
+		return -ENOMEM;
+	}
 	pool = pci_pool_create("ipw2200", priv->pci_dev, CB_MAX_LENGTH, 0, 0);
 	if (!pool) {
 		IPW_ERROR("pci_pool_create failed\n");
+		kfree(phys);
+		kfree(virts);
 		return -ENOMEM;
 	}
 
@@ -3254,6 +3267,8 @@ static int ipw_load_firmware(struct ipw_priv *priv, u8 * data, size_t len)
 		pci_pool_free(pool, virts[i], phys[i]);
 
 	pci_pool_destroy(pool);
+	kfree(phys);
+	kfree(virts);
 
 	return ret;
 }
diff --git a/drivers/net/wireless/ipw2x00/libipw.h b/drivers/net/wireless/ipw2x00/libipw.h
index bf45391172f3..a6d5e42647e4 100644
--- a/drivers/net/wireless/ipw2x00/libipw.h
+++ b/drivers/net/wireless/ipw2x00/libipw.h
@@ -797,7 +797,7 @@ struct libipw_device {
 	/* Probe / Beacon management */
 	struct list_head network_free_list;
 	struct list_head network_list;
-	struct libipw_network *networks;
+	struct libipw_network *networks[MAX_NETWORK_COUNT];
 	int scans;
 	int scan_age;
 
diff --git a/drivers/net/wireless/ipw2x00/libipw_module.c b/drivers/net/wireless/ipw2x00/libipw_module.c
index 1ae0b2b02c38..2fa55867bd8b 100644
--- a/drivers/net/wireless/ipw2x00/libipw_module.c
+++ b/drivers/net/wireless/ipw2x00/libipw_module.c
@@ -67,16 +67,17 @@ void *libipw_wiphy_privid = &libipw_wiphy_privid;
 
 static int libipw_networks_allocate(struct libipw_device *ieee)
 {
-	if (ieee->networks)
-		return 0;
-
-	ieee->networks =
-	    kzalloc(MAX_NETWORK_COUNT * sizeof(struct libipw_network),
-		    GFP_KERNEL);
-	if (!ieee->networks) {
-		printk(KERN_WARNING "%s: Out of memory allocating beacons\n",
-		       ieee->dev->name);
-		return -ENOMEM;
+	int i, j;
+
+	for (i = 0; i < MAX_NETWORK_COUNT; i++) {
+		ieee->networks[i] = kzalloc(sizeof(struct libipw_network),
+					    GFP_KERNEL);
+		if (!ieee->networks[i]) {
+			LIBIPW_ERROR("Out of memory allocating beacons\n");
+			for (j = 0; j < i; j++)
+				kfree(ieee->networks[j]);
+			return -ENOMEM;
+		}
 	}
 
 	return 0;
@@ -97,15 +98,11 @@ static inline void libipw_networks_free(struct libipw_device *ieee)
 {
 	int i;
 
-	if (!ieee->networks)
-		return;
-
-	for (i = 0; i < MAX_NETWORK_COUNT; i++)
-		if (ieee->networks[i].ibss_dfs)
-			kfree(ieee->networks[i].ibss_dfs);
-
-	kfree(ieee->networks);
-	ieee->networks = NULL;
+	for (i = 0; i < MAX_NETWORK_COUNT; i++) {
+		if (ieee->networks[i]->ibss_dfs)
+			kfree(ieee->networks[i]->ibss_dfs);
+		kfree(ieee->networks[i]);
+	}
 }
 
 void libipw_networks_age(struct libipw_device *ieee,
@@ -130,7 +127,7 @@ static void libipw_networks_initialize(struct libipw_device *ieee)
 	INIT_LIST_HEAD(&ieee->network_free_list);
 	INIT_LIST_HEAD(&ieee->network_list);
 	for (i = 0; i < MAX_NETWORK_COUNT; i++)
-		list_add_tail(&ieee->networks[i].list,
+		list_add_tail(&ieee->networks[i]->list,
 			      &ieee->network_free_list);
 }
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index 303cc8193adc..e0678d921055 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -184,7 +184,7 @@ static int iwl3945_hwrate_to_plcp_idx(u8 plcp)
 {
 	int idx;
 
-	for (idx = 0; idx < IWL_RATE_COUNT; idx++)
+	for (idx = 0; idx < IWL_RATE_COUNT_3945; idx++)
 		if (iwl3945_rates[idx].plcp == plcp)
 			return idx;
 	return -1;
@@ -805,7 +805,7 @@ void iwl3945_hw_build_tx_cmd_rate(struct iwl_priv *priv,
 				  int sta_id, int tx_id)
 {
 	u16 hw_value = ieee80211_get_tx_rate(priv->hw, info)->hw_value;
-	u16 rate_index = min(hw_value & 0xffff, IWL_RATE_COUNT - 1);
+	u16 rate_index = min(hw_value & 0xffff, IWL_RATE_COUNT_3945);
 	u16 rate_mask;
 	int rate;
 	u8 rts_retry_limit;
@@ -2146,7 +2146,7 @@ static void iwl3945_hw_reg_init_channel_groups(struct iwl_priv *priv)
 
 		/* fill in channel group's nominal powers for each rate */
 		for (rate_index = 0;
-		     rate_index < IWL_RATE_COUNT; rate_index++, clip_pwrs++) {
+		     rate_index < IWL_RATE_COUNT_3945; rate_index++, clip_pwrs++) {
 			switch (rate_index) {
 			case IWL_RATE_36M_INDEX_TABLE:
 				if (i == 0)	/* B/G */
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 6aeb82b6992f..818367b57bab 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -1463,59 +1463,66 @@ static void iwl_nic_start(struct iwl_priv *priv)
 }
 
 
+static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context);
+static int iwl_mac_setup_register(struct iwl_priv *priv);
+
+static int __must_check iwl_request_firmware(struct iwl_priv *priv, bool first)
+{
+	const char *name_pre = priv->cfg->fw_name_pre;
+
+	if (first)
+		priv->fw_index = priv->cfg->ucode_api_max;
+	else
+		priv->fw_index--;
+
+	if (priv->fw_index < priv->cfg->ucode_api_min) {
+		IWL_ERR(priv, "no suitable firmware found!\n");
+		return -ENOENT;
+	}
+
+	sprintf(priv->firmware_name, "%s%d%s",
+		name_pre, priv->fw_index, ".ucode");
+
+	IWL_DEBUG_INFO(priv, "attempting to load firmware '%s'\n",
+		       priv->firmware_name);
+
+	return request_firmware_nowait(THIS_MODULE, 1, priv->firmware_name,
+				       &priv->pci_dev->dev, GFP_KERNEL, priv,
+				       iwl_ucode_callback);
+}
+
 /**
- * iwl_read_ucode - Read uCode images from disk file.
+ * iwl_ucode_callback - callback when firmware was loaded
  *
- * Copy into buffers for card to fetch via bus-mastering
+ * If loaded successfully, copies the firmware into buffers
+ * for the card to fetch (via DMA).
  */
-static int iwl_read_ucode(struct iwl_priv *priv)
+static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context)
 {
+	struct iwl_priv *priv = context;
 	struct iwl_ucode_header *ucode;
-	int ret = -EINVAL, index;
-	const struct firmware *ucode_raw;
-	const char *name_pre = priv->cfg->fw_name_pre;
 	const unsigned int api_max = priv->cfg->ucode_api_max;
 	const unsigned int api_min = priv->cfg->ucode_api_min;
-	char buf[25];
 	u8 *src;
 	size_t len;
 	u32 api_ver, build;
 	u32 inst_size, data_size, init_size, init_data_size, boot_size;
+	int err;
 	u16 eeprom_ver;
 
-	/* Ask kernel firmware_class module to get the boot firmware off disk.
-	 * request_firmware() is synchronous, file is in memory on return. */
-	for (index = api_max; index >= api_min; index--) {
-		sprintf(buf, "%s%d%s", name_pre, index, ".ucode");
-		ret = request_firmware(&ucode_raw, buf, &priv->pci_dev->dev);
-		if (ret < 0) {
-			IWL_ERR(priv, "%s firmware file req failed: %d\n",
-				  buf, ret);
-			if (ret == -ENOENT)
-				continue;
-			else
-				goto error;
-		} else {
-			if (index < api_max)
-				IWL_ERR(priv, "Loaded firmware %s, "
-					"which is deprecated. "
-					"Please use API v%u instead.\n",
-					  buf, api_max);
-
-			IWL_DEBUG_INFO(priv, "Got firmware '%s' file (%zd bytes) from disk\n",
-				       buf, ucode_raw->size);
-			break;
-		}
+	if (!ucode_raw) {
+		IWL_ERR(priv, "request for firmware file '%s' failed.\n",
+			priv->firmware_name);
+		goto try_again;
 	}
 
-	if (ret < 0)
-		goto error;
+	IWL_DEBUG_INFO(priv, "Loaded firmware file '%s' (%zd bytes).\n",
+		       priv->firmware_name, ucode_raw->size);
 
 	/* Make sure that we got at least the v1 header! */
 	if (ucode_raw->size < priv->cfg->ops->ucode->get_header_size(1)) {
 		IWL_ERR(priv, "File size way too small!\n");
-		ret = -EINVAL;
-		goto err_release;
+		goto try_again;
 	}
 
 	/* Data from ucode file:  header followed by uCode images */
@@ -1540,10 +1547,9 @@ static int iwl_read_ucode(struct iwl_priv *priv)
 		IWL_ERR(priv, "Driver unable to support your firmware API. "
 			  "Driver supports v%u, firmware is v%u.\n",
 			  api_max, api_ver);
-		priv->ucode_ver = 0;
-		ret = -EINVAL;
-		goto err_release;
+		goto try_again;
 	}
+
 	if (api_ver != api_max)
 		IWL_ERR(priv, "Firmware has old API version. Expected v%u, "
 			  "got v%u. New firmware can be obtained "
@@ -1585,6 +1591,12 @@ static int iwl_read_ucode(struct iwl_priv *priv)
 	IWL_DEBUG_INFO(priv, "f/w package hdr boot inst size = %u\n",
 		       boot_size);
 
+	/*
+	 * For any of the failures below (before allocating pci memory)
+	 * we will try to load a version with a smaller API -- maybe the
+	 * user just got a corrupted version of the latest API.
+	 */
+
 	/* Verify size of file vs. image size info in file's header */
 	if (ucode_raw->size !=
 		priv->cfg->ops->ucode->get_header_size(api_ver) +
@@ -1594,41 +1606,35 @@ static int iwl_read_ucode(struct iwl_priv *priv)
 		IWL_DEBUG_INFO(priv,
 			"uCode file size %d does not match expected size\n",
 			(int)ucode_raw->size);
-		ret = -EINVAL;
-		goto err_release;
+		goto try_again;
 	}
 
 	/* Verify that uCode images will fit in card's SRAM */
 	if (inst_size > priv->hw_params.max_inst_size) {
 		IWL_DEBUG_INFO(priv, "uCode instr len %d too large to fit in\n",
 			       inst_size);
-		ret = -EINVAL;
-		goto err_release;
+		goto try_again;
 	}
 
 	if (data_size > priv->hw_params.max_data_size) {
 		IWL_DEBUG_INFO(priv, "uCode data len %d too large to fit in\n",
 				data_size);
-		ret = -EINVAL;
-		goto err_release;
+		goto try_again;
 	}
 	if (init_size > priv->hw_params.max_inst_size) {
 		IWL_INFO(priv, "uCode init instr len %d too large to fit in\n",
 			init_size);
-		ret = -EINVAL;
-		goto err_release;
+		goto try_again;
 	}
 	if (init_data_size > priv->hw_params.max_data_size) {
 		IWL_INFO(priv, "uCode init data len %d too large to fit in\n",
 		      init_data_size);
-		ret = -EINVAL;
-		goto err_release;
+		goto try_again;
 	}
 	if (boot_size > priv->hw_params.max_bsm_size) {
 		IWL_INFO(priv, "uCode boot instr len %d too large to fit in\n",
 			boot_size);
-		ret = -EINVAL;
-		goto err_release;
+		goto try_again;
 	}
 
 	/* Allocate ucode buffers for card's bus-master loading ... */
@@ -1712,20 +1718,36 @@ static int iwl_read_ucode(struct iwl_priv *priv)
 	IWL_DEBUG_INFO(priv, "Copying (but not loading) boot instr len %Zd\n", len);
 	memcpy(priv->ucode_boot.v_addr, src, len);
 
+	/**************************************************
+	 * This is still part of probe() in a sense...
+	 *
+	 * 9. Setup and register with mac80211 and debugfs
+	 **************************************************/
+	err = iwl_mac_setup_register(priv);
+	if (err)
+		goto out_unbind;
+
+	err = iwl_dbgfs_register(priv, DRV_NAME);
+	if (err)
+		IWL_ERR(priv, "failed to create debugfs files. Ignoring error: %d\n", err);
+
 	/* We have our copies now, allow OS release its copies */
 	release_firmware(ucode_raw);
-	return 0;
+	return;
+
+ try_again:
+	/* try next, if any */
+	if (iwl_request_firmware(priv, false))
+		goto out_unbind;
+	release_firmware(ucode_raw);
+	return;
 
  err_pci_alloc:
 	IWL_ERR(priv, "failed to allocate pci memory\n");
-	ret = -ENOMEM;
 	iwl_dealloc_ucode_pci(priv);
-
- err_release:
+ out_unbind:
+	device_release_driver(&priv->pci_dev->dev);
 	release_firmware(ucode_raw);
-
- error:
-	return ret;
 }
 
 static const char *desc_lookup_text[] = {
@@ -2631,7 +2653,7 @@ static int iwl_mac_setup_register(struct iwl_priv *priv)
 	 */
 	hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
 
-	hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX + 1;
+	hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX;
 	/* we create the 802.11 header and a zero-length SSID element */
 	hw->wiphy->max_scan_ie_len = IWL_MAX_PROBE_REQUEST - 24 - 2;
 
@@ -2667,21 +2689,7 @@ static int iwl_mac_start(struct ieee80211_hw *hw)
 
 	/* we should be verifying the device is ready to be opened */
 	mutex_lock(&priv->mutex);
-
-	/* fetch ucode file from disk, alloc and copy to bus-master buffers ...
-	 * ucode filename and max sizes are card-specific. */
-
-	if (!priv->ucode_code.len) {
-		ret = iwl_read_ucode(priv);
-		if (ret) {
-			IWL_ERR(priv, "Could not read microcode: %d\n", ret);
-			mutex_unlock(&priv->mutex);
-			return ret;
-		}
-	}
-
 	ret = __iwl_up(priv);
-
 	mutex_unlock(&priv->mutex);
 
 	if (ret)
@@ -3654,17 +3662,10 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	iwl_power_initialize(priv);
 	iwl_tt_initialize(priv);
 
-	/**************************************************
-	 * 9. Setup and register with mac80211 and debugfs
-	 **************************************************/
-	err = iwl_mac_setup_register(priv);
+	err = iwl_request_firmware(priv, true);
 	if (err)
 		goto out_remove_sysfs;
 
-	err = iwl_dbgfs_register(priv, DRV_NAME);
-	if (err)
-		IWL_ERR(priv, "failed to create debugfs files. Ignoring error: %d\n", err);
-
 	return 0;
 
  out_remove_sysfs:
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index ab891b958042..6054c5fba0c1 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -1132,6 +1132,7 @@ struct iwl_priv {
 	u8   rev_id;
 
 	/* uCode images, save to reload in case of failure */
+	int fw_index;			/* firmware we're trying to load */
 	u32 ucode_ver;			/* version of ucode, copy of
 					   iwl_ucode.ver */
 	struct fw_desc ucode_code;	/* runtime inst */
@@ -1142,6 +1143,7 @@ struct iwl_priv {
 	struct fw_desc ucode_boot;	/* bootstrap inst */
 	enum ucode_type ucode_type;
 	u8 ucode_write_complete;	/* the image write is complete */
+	char firmware_name[25];
 
 
 	struct iwl_rxon_time_cmd rxon_timing;
diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index dd9ff2ed645a..bd2f7c420563 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -638,20 +638,9 @@ u16 iwl_fill_probe_req(struct iwl_priv *priv, struct ieee80211_mgmt *frame,
 	if (left < 0)
 		return 0;
 	*pos++ = WLAN_EID_SSID;
-	if (!priv->is_internal_short_scan &&
-	    priv->scan_request->n_ssids) {
-		struct cfg80211_ssid *ssid =
-			priv->scan_request->ssids;
-
-		/* Broadcast if ssid_len is 0 */
-		*pos++ = ssid->ssid_len;
-		memcpy(pos, ssid->ssid, ssid->ssid_len);
-		pos += ssid->ssid_len;
-		len += 2 + ssid->ssid_len;
-	} else {
-		*pos++ = 0;
-		len += 2;
-	}
+	*pos++ = 0;
+
+	len += 2;
 
 	if (WARN_ON(left < ie_len))
 		return len;
@@ -780,26 +769,20 @@ static void iwl_bg_request_scan(struct work_struct *data)
 	if (priv->is_internal_short_scan) {
 		IWL_DEBUG_SCAN(priv, "Start internal passive scan.\n");
 	} else if (priv->scan_request->n_ssids) {
+		int i, p = 0;
 		IWL_DEBUG_SCAN(priv, "Kicking off active scan\n");
-		/*
-		 * The first SSID to scan is stuffed into the probe request
-		 * template and the remaining ones are handled through the
-		 * direct_scan array.
-		 */
-		if (priv->scan_request->n_ssids > 1) {
-			int i, p = 0;
-			for (i = 1; i < priv->scan_request->n_ssids; i++) {
-				if (!priv->scan_request->ssids[i].ssid_len)
-					continue;
-				scan->direct_scan[p].id = WLAN_EID_SSID;
-				scan->direct_scan[p].len =
-					priv->scan_request->ssids[i].ssid_len;
-				memcpy(scan->direct_scan[p].ssid,
-				       priv->scan_request->ssids[i].ssid,
-				       priv->scan_request->ssids[i].ssid_len);
-				n_probes++;
-				p++;
-			}
+		for (i = 0; i < priv->scan_request->n_ssids; i++) {
+			/* always does wildcard anyway */
+			if (!priv->scan_request->ssids[i].ssid_len)
+				continue;
+			scan->direct_scan[p].id = WLAN_EID_SSID;
+			scan->direct_scan[p].len =
+				priv->scan_request->ssids[i].ssid_len;
+			memcpy(scan->direct_scan[p].ssid,
+			       priv->scan_request->ssids[i].ssid,
+			       priv->scan_request->ssids[i].ssid_len);
+			n_probes++;
+			p++;
 		}
 		is_active = true;
 	} else
diff --git a/drivers/net/wireless/iwmc3200wifi/lmac.h b/drivers/net/wireless/iwmc3200wifi/lmac.h
index a3a79b5e2898..a855a99e49b8 100644
--- a/drivers/net/wireless/iwmc3200wifi/lmac.h
+++ b/drivers/net/wireless/iwmc3200wifi/lmac.h
@@ -262,7 +262,7 @@ struct iwm_ct_kill_cfg_cmd {
 
 /* Power Management */
 #define POWER_TABLE_CMD			0x77
-#define SAVE_RESTORE_ADRESS_CMD		0x78
+#define SAVE_RESTORE_ADDRESS_CMD		0x78
 #define REPLY_WATERMARK_CMD		0x79
 #define PM_DEBUG_STATISTIC_NOTIFIC	0x7B
 #define PD_FLUSH_N_NOTIFICATION		0x7C
diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c
index 9f6d6bf06b8e..2887047069f2 100644
--- a/drivers/net/wireless/rndis_wlan.c
+++ b/drivers/net/wireless/rndis_wlan.c
@@ -1496,51 +1496,67 @@ static void set_multicast_list(struct usbnet *usbdev)
 {
 	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 	struct dev_mc_list *mclist;
-	__le32 filter;
-	int ret, i, size;
-	char *buf;
+	__le32 filter, basefilter;
+	int ret;
+	char *mc_addrs = NULL;
+	int mc_count;
 
-	filter = RNDIS_PACKET_TYPE_DIRECTED | RNDIS_PACKET_TYPE_BROADCAST;
+	basefilter = filter = RNDIS_PACKET_TYPE_DIRECTED |
+			      RNDIS_PACKET_TYPE_BROADCAST;
 
-	netif_addr_lock_bh(usbdev->net);
 	if (usbdev->net->flags & IFF_PROMISC) {
 		filter |= RNDIS_PACKET_TYPE_PROMISCUOUS |
 			RNDIS_PACKET_TYPE_ALL_LOCAL;
-	} else if (usbdev->net->flags & IFF_ALLMULTI ||
-		   netdev_mc_count(usbdev->net) > priv->multicast_size) {
+	} else if (usbdev->net->flags & IFF_ALLMULTI) {
+		filter |= RNDIS_PACKET_TYPE_ALL_MULTICAST;
+	}
+
+	if (filter != basefilter)
+		goto set_filter;
+
+	/*
+	 * mc_list should be accessed holding the lock, so copy addresses to
+	 * local buffer first.
+	 */
+	netif_addr_lock_bh(usbdev->net);
+	mc_count = netdev_mc_count(usbdev->net);
+	if (mc_count > priv->multicast_size) {
 		filter |= RNDIS_PACKET_TYPE_ALL_MULTICAST;
-	} else if (!netdev_mc_empty(usbdev->net)) {
-		size = min(priv->multicast_size, netdev_mc_count(usbdev->net));
-		buf = kmalloc(size * ETH_ALEN, GFP_KERNEL);
-		if (!buf) {
+	} else if (mc_count) {
+		int i = 0;
+
+		mc_addrs = kmalloc(mc_count * ETH_ALEN, GFP_ATOMIC);
+		if (!mc_addrs) {
 			netdev_warn(usbdev->net,
 				    "couldn't alloc %d bytes of memory\n",
-				    size * ETH_ALEN);
+				    mc_count * ETH_ALEN);
 			netif_addr_unlock_bh(usbdev->net);
 			return;
 		}
 
-		i = 0;
-		netdev_for_each_mc_addr(mclist, usbdev->net) {
-			if (i == size)
-				break;
-			memcpy(buf + i++ * ETH_ALEN, mclist->dmi_addr, ETH_ALEN);
-		}
+		netdev_for_each_mc_addr(mclist, usbdev->net)
+			memcpy(mc_addrs + i++ * ETH_ALEN,
+			       mclist->dmi_addr, ETH_ALEN);
+	}
+	netif_addr_unlock_bh(usbdev->net);
 
-		ret = rndis_set_oid(usbdev, OID_802_3_MULTICAST_LIST, buf,
-								i * ETH_ALEN);
-		if (ret == 0 && i > 0)
+	if (filter != basefilter)
+		goto set_filter;
+
+	if (mc_count) {
+		ret = rndis_set_oid(usbdev, OID_802_3_MULTICAST_LIST, mc_addrs,
+				    mc_count * ETH_ALEN);
+		kfree(mc_addrs);
+		if (ret == 0)
 			filter |= RNDIS_PACKET_TYPE_MULTICAST;
 		else
 			filter |= RNDIS_PACKET_TYPE_ALL_MULTICAST;
 
 		netdev_dbg(usbdev->net, "OID_802_3_MULTICAST_LIST(%d, max: %d) -> %d\n",
-			   i, priv->multicast_size, ret);
-
-		kfree(buf);
+			   mc_count, priv->multicast_size, ret);
 	}
-	netif_addr_unlock_bh(usbdev->net);
 
+set_filter:
 	ret = rndis_set_oid(usbdev, OID_GEN_CURRENT_PACKET_FILTER, &filter,
 							sizeof(filter));
 	if (ret < 0) {
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index ee34c137e7cd..9b04964deced 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -368,7 +368,7 @@ static int rt2500usb_config_key(struct rt2x00_dev *rt2x00dev,
 
 		/*
 		 * The encryption key doesn't fit within the CSR cache,
-		 * this means we should allocate it seperately and use
+		 * this means we should allocate it separately and use
 		 * rt2x00usb_vendor_request() to send the key to the hardware.
 		 */
 		reg = KEY_ENTRY(key->hw_key_idx);
@@ -382,7 +382,7 @@ static int rt2500usb_config_key(struct rt2x00_dev *rt2x00dev,
 		/*
 		 * The driver does not support the IV/EIV generation
 		 * in hardware. However it demands the data to be provided
-		 * both seperately as well as inside the frame.
+		 * both separately as well as inside the frame.
 		 * We already provided the CONFIG_CRYPTO_COPY_IV to rt2x00lib
 		 * to ensure rt2x00lib will not strip the data from the
 		 * frame after the copy, now we must tell mac80211
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index aca8c124f434..91cce2d0f6db 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -1225,7 +1225,7 @@ MODULE_LICENSE("GPL");
 #ifdef CONFIG_RT2800PCI_SOC
 static int rt2800soc_probe(struct platform_device *pdev)
 {
-	return rt2x00soc_probe(pdev, rt2800pci_ops);
+	return rt2x00soc_probe(pdev, &rt2800pci_ops);
 }
 
 static struct platform_driver rt2800soc_driver = {
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 5e4ee2023fcf..d27d7d5d850c 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -99,7 +99,7 @@ static int rt2800usb_check_firmware(struct rt2x00_dev *rt2x00dev,
 	 * There are 2 variations of the rt2870 firmware.
 	 * a) size: 4kb
 	 * b) size: 8kb
-	 * Note that (b) contains 2 seperate firmware blobs of 4k
+	 * Note that (b) contains 2 separate firmware blobs of 4k
 	 * within the file. The first blob is the same firmware as (a),
 	 * but the second blob is for the additional chipsets.
 	 */
@@ -117,7 +117,7 @@ static int rt2800usb_check_firmware(struct rt2x00_dev *rt2x00dev,
 
 	/*
 	 * 8kb firmware files must be checked as if it were
-	 * 2 seperate firmware files.
+	 * 2 separate firmware files.
 	 */
 	while (offset < len) {
 		if (!rt2800usb_check_crc(data + offset, 4096))
diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.c b/drivers/net/wireless/rt2x00/rt2x00debug.c
index 70c04c282efc..28a1c46ec4eb 100644
--- a/drivers/net/wireless/rt2x00/rt2x00debug.c
+++ b/drivers/net/wireless/rt2x00/rt2x00debug.c
@@ -109,7 +109,7 @@ struct rt2x00debug_intf {
 
 	/*
 	 * HW crypto statistics.
-	 * All statistics are stored seperately per cipher type.
+	 * All statistics are stored separately per cipher type.
 	 */
 	struct rt2x00debug_crypto crypto_stats[CIPHER_MAX];
 
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index b93731b79903..dd5ab8fe2321 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -394,7 +394,7 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
 	/*
 	 * Hardware might have stripped the IV/EIV/ICV data,
 	 * in that case it is possible that the data was
-	 * provided seperately (through hardware descriptor)
+	 * provided separately (through hardware descriptor)
 	 * in which case we should reinsert the data into the frame.
 	 */
 	if ((rxdesc.dev_flags & RXDONE_CRYPTO_IV) &&
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 0b4801a14601..5b6b789cad3d 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -497,7 +497,7 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb,
 	/*
 	 * When hardware encryption is supported, and this frame
 	 * is to be encrypted, we should strip the IV/EIV data from
-	 * the frame so we can provide it to the driver seperately.
+	 * the frame so we can provide it to the driver separately.
 	 */
 	if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc.flags) &&
 	    !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc.flags)) {
diff --git a/drivers/net/wireless/rt2x00/rt2x00soc.c b/drivers/net/wireless/rt2x00/rt2x00soc.c
index 4efdc96010f6..111c0ff5c6c7 100644
--- a/drivers/net/wireless/rt2x00/rt2x00soc.c
+++ b/drivers/net/wireless/rt2x00/rt2x00soc.c
@@ -112,6 +112,7 @@ exit_free_device:
 
 	return retval;
 }
+EXPORT_SYMBOL_GPL(rt2x00soc_probe);
 
 int rt2x00soc_remove(struct platform_device *pdev)
 {
diff --git a/drivers/net/wireless/rt2x00/rt2x00soc.h b/drivers/net/wireless/rt2x00/rt2x00soc.h
index 4739edfe2f00..474cbfc1efc7 100644
--- a/drivers/net/wireless/rt2x00/rt2x00soc.h
+++ b/drivers/net/wireless/rt2x00/rt2x00soc.h
@@ -26,8 +26,6 @@
 #ifndef RT2X00SOC_H
 #define RT2X00SOC_H
 
-#define KSEG1ADDR(__ptr) __ptr
-
 /*
  * SoC driver handlers.
  */
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index e2da928dd9f0..177472742172 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -476,7 +476,7 @@ static int rt61pci_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
 		 * The driver does not support the IV/EIV generation
 		 * in hardware. However it doesn't support the IV/EIV
 		 * inside the ieee80211 frame either, but requires it
-		 * to be provided seperately for the descriptor.
+		 * to be provided separately for the descriptor.
 		 * rt2x00lib will cut the IV/EIV data out of all frames
 		 * given to us by mac80211, but we must tell mac80211
 		 * to generate the IV/EIV data.
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index f39a8ed17841..290d70bc5d22 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -339,7 +339,7 @@ static int rt73usb_config_shared_key(struct rt2x00_dev *rt2x00dev,
 		 * The driver does not support the IV/EIV generation
 		 * in hardware. However it doesn't support the IV/EIV
 		 * inside the ieee80211 frame either, but requires it
-		 * to be provided seperately for the descriptor.
+		 * to be provided separately for the descriptor.
 		 * rt2x00lib will cut the IV/EIV data out of all frames
 		 * given to us by mac80211, but we must tell mac80211
 		 * to generate the IV/EIV data.
@@ -439,7 +439,7 @@ static int rt73usb_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
 		 * The driver does not support the IV/EIV generation
 		 * in hardware. However it doesn't support the IV/EIV
 		 * inside the ieee80211 frame either, but requires it
-		 * to be provided seperately for the descriptor.
+		 * to be provided separately for the descriptor.
 		 * rt2x00lib will cut the IV/EIV data out of all frames
 		 * given to us by mac80211, but we must tell mac80211
 		 * to generate the IV/EIV data.
@@ -1661,7 +1661,7 @@ static void rt73usb_fill_rxdone(struct queue_entry *entry,
 
 		/*
 		 * Hardware has stripped IV/EIV data from 802.11 frame during
-		 * decryption. It has provided the data seperately but rt2x00lib
+		 * decryption. It has provided the data separately but rt2x00lib
 		 * should decide if it should be reinserted.
 		 */
 		rxdesc->flags |= RX_FLAG_IV_STRIPPED;
@@ -2352,6 +2352,8 @@ static struct usb_device_id rt73usb_device_table[] = {
 	{ USB_DEVICE(0x0411, 0x00f4), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x0411, 0x0116), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x0411, 0x0119), USB_DEVICE_DATA(&rt73usb_ops) },
+	/* CEIVA */
+	{ USB_DEVICE(0x178d, 0x02be), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* CNet */
 	{ USB_DEVICE(0x1371, 0x9022), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x1371, 0x9032), USB_DEVICE_DATA(&rt73usb_ops) },
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index 2d555cc30508..00e09e26c826 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -350,7 +350,7 @@ static void zd_mac_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb,
 	first_idx = info->status.rates[0].idx;
 	ZD_ASSERT(0<=first_idx && first_idx<ARRAY_SIZE(zd_retry_rates));
 	retries = &zd_retry_rates[first_idx];
-	ZD_ASSERT(0<=retry && retry<=retries->count);
+	ZD_ASSERT(1 <= retry && retry <= retries->count);
 
 	info->status.rates[0].idx = retries->rate[0];
 	info->status.rates[0].count = 1; // (retry > 1 ? 2 : 1);
@@ -360,7 +360,7 @@ static void zd_mac_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb,
 		info->status.rates[i].count = 1; // ((i==retry-1) && success ? 1:2);
 	}
 	for (; i<IEEE80211_TX_MAX_RATES && i<retry; i++) {
-		info->status.rates[i].idx = retries->rate[retry-1];
+		info->status.rates[i].idx = retries->rate[retry - 1];
 		info->status.rates[i].count = 1; // (success ? 1:2);
 	}
 	if (i<IEEE80211_TX_MAX_RATES)
@@ -374,7 +374,7 @@ static void zd_mac_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb,
  * zd_mac_tx_failed - callback for failed frames
  * @dev: the mac80211 wireless device
  *
- * This function is called if a frame couldn't be successfully be
+ * This function is called if a frame couldn't be successfully
  * transferred. The first frame from the tx queue, will be selected and
  * reported as error to the upper layers.
  */
@@ -424,12 +424,10 @@ void zd_mac_tx_failed(struct urb *urb)
 		first_idx = info->status.rates[0].idx;
 		ZD_ASSERT(0<=first_idx && first_idx<ARRAY_SIZE(zd_retry_rates));
 		retries = &zd_retry_rates[first_idx];
-		if (retry < 0 || retry > retries->count) {
+		if (retry <= 0 || retry > retries->count)
 			continue;
-		}
 
-		ZD_ASSERT(0<=retry && retry<=retries->count);
-		final_idx = retries->rate[retry-1];
+		final_idx = retries->rate[retry - 1];
 		final_rate = zd_rates[final_idx].hw_value;
 
 		if (final_rate != tx_status->rate) {
diff --git a/drivers/parisc/pdc_stable.c b/drivers/parisc/pdc_stable.c
index 0bc5d474b168..1062b8ffe244 100644
--- a/drivers/parisc/pdc_stable.c
+++ b/drivers/parisc/pdc_stable.c
@@ -481,7 +481,7 @@ pdcspath_attr_store(struct kobject *kobj, struct attribute *attr,
 	return ret;
 }
 
-static struct sysfs_ops pdcspath_attr_ops = {
+static const struct sysfs_ops pdcspath_attr_ops = {
 	.show = pdcspath_attr_show,
 	.store = pdcspath_attr_store,
 };
diff --git a/drivers/parport/ChangeLog b/drivers/parport/ChangeLog
deleted file mode 100644
index 8565bbbeb6ec..000000000000
--- a/drivers/parport/ChangeLog
+++ /dev/null
@@ -1,583 +0,0 @@
-2001-10-11  Tim Waugh  <twaugh@redhat.com>
-	* parport_pc.c, parport_serial.c: Support for NetMos cards.
-	+ Patch originally from Michael Reinelt <reinelt@eunet.at>.
-
-2002-04-25  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_serial.c, parport_pc.c: Move some SIIG cards around.
-	Patch from Andrey Panin.
-
-2002-01-20  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (parport_pc_compat_write_block_pio,
-	parport_pc_ecp_write_block_pio, parport_pc_ecp_read_block_pio):
-	Use the default implementations if the caller wants to use
-	O_NONBLOCK.
-
-2002-02-25  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c: Make sure that priv->ctr_writable includes IntEn
-	even if IRQ is given as a parameter.
-
-2002-01-21  Tim Waugh  <twaugh@redhat.com>
-
-	* daisy.c: Apply patch from Max Vorobiev to make parport_daisy_select
-	work for ECP/EPP modes.
-
-2002-01-13  Niels Kristian Bech Jensen  <nkbj@image.dk>
-
-	* parport_pc.c: Change some occurrences of frob_set_mode to
-	ECR_WRITE.  This fixes PLIP.
-
-2002-01-04  Tim Waugh  <twaugh@redhat.com>
-
-	* share.c (parport_claim_or_block): Sleep interruptibly to prevent
-	a possible deadlock.
-
-2001-12-07  Damian Gruszka  <damian.gruszka@VisionSystems.de>
-
-	* parport_pc.c (ECR_WRITE): Define.  If there are forbidden bits
-	in the ECR register for some chips, this will be a useful place to
-	put that knowledge.
-	(change_mode): Use ECR_WRITE.
-	(parport_pc_restore_state): Likewise.
-	(parport_ECPPS2_supported): Likewise.
-	(parport_ECPEPP_supported): Likewise.
-	(irq_probe_EPP): Likewise.
-	(programmable_irq_support): Likewise.
-	(programmable_dma_support): Likewise.
-	(parport_pc_probe_port): Likewise.
-
-	(frob_set_mode): New function.  Set the mode bits of the ECR.
-	(get_fifo_residue): Use frob_set_mode.
-	(parport_pc_ecpepp_read_data): Likewise.
-	(parport_pc_ecpepp_write_data): Likewise.
-	(parport_pc_ecpepp_read_addr): Likewise.
-	(parport_pc_ecpepp_write_addr): Likewise.
-	(parport_pc_compat_write_block_pio): Likewise.
-	(parport_pc_ecp_write_block_pio): Likewise.
-	(parport_ECR_present): Likewise.
-	(parport_ECP_supported): Likewise.
-	(parport_EPP_supported): Likewise.
-	(parport_ECPEPP_supported): Likewise.
-	(programmable_irq_support): Likewise.
-	(irq_probe_ECP): Likewise.
-	(programmable_dma_support): Likewise.
-
-	(parport_pc_enable_irq): Only enable interrupts if we know which
-	IRQ line they will come from.
-	(parport_pc_init_state): Set nErrIntrEn at initialisation.
-	(parport_pc_restore_state): Only write writable bits of CTR.
-	(parport_irq_probe): If no IRQ is found, take ackIntEn out of the
-	writable bit set.
-
-2001-12-07  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (parport_pc_fifo_write_block_pio): Correct typo.
-	(parport_pc_init_state): Only set ackIntEn if we know which IRQ
-	line the interrupts will come from.
-
-2001-12-07  Tim Waugh  <twaugh@redhat.com>
-
-	* ieee1284_ops.c (parport_ieee1284_epp_write_addr,
-	parport_ieee1284_epp_read_addr): Actually do something useful.
-
-2001-12-07  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (dmaval): Don't use DMA by default.  It seems to be
-	too buggy at the moment.  Use 'dma=auto' to restore the previous
-	behaviour.
-
-2001-12-07  Tim Waugh  <twaugh@redhat.com>
-
-	* daisy.c (DEBUG): Undefine.
-
-2001-12-06  Tim Waugh  <twaugh@redhat.com>
-
-	* ieee1284_ops.c (parport_ieee1284_ecp_read_data): Mask off
-	PARPORT_CONTROL_AUTOFD as well.  Bug spotted by Joe
-	<joeja@mindspring.com>.
-
-2001-12-03  Rich Liu  <Rich.Liu@ite.com.tw>
-
-	* parport_pc.c (sio_ite_8872_probe): ITE8873 is a single-port
-	serial board, not a serial+parallel.
-
-2001-11-30  Niels Kristian Bech Jensen  <nkbj@image.dk>
-
-	* parport_pc.c: Fix compiler warning.
-
-2001-11-14  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (parport_pc_pci_probe): Hooks for PCI cards before
-	and after probing for ports.
-	* parport_serial.c (parport_register): Likewise.
-
-2001-11-12  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (init_module): Warn when parameters are ignored.
-
-2001-11-01  Damian Gruszka  <damian.gruszka@VisionSystems.de>
-
-	* parport_serial.c (serial_register): Set base_baud before
-	calling register_serial.
-
-2001-10-26  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (parport_irq_probe): When ECR programmable IRQ
-	support fails, generate interrupts using the FIFO even if we don't
-	want to use the FIFO for real data transfers.
-	(parport_pc_probe_port): Display the ECR address if we have an
-	ECR, not just if we will use the FIFO.
-
-2001-10-24  Dave Strauss  <D.Strauss@motorola.com>
-
-	* parport_pc.c (parport_pc_compat_write_block_pio,
-	parport_pc_ecp_write_block_pio): Allow a few seconds for an ECP
-	transfer to finish up.
-
-2001-10-11  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc (sio_ite_8872_probe): New function, submitted by Rich
-	Liu from ITE.  Cleaned up, removed bogus phys_to_virt calls.
-
-2001-10-24  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c: Support for AKS AladdinCARD.  Patch from
-	Aladdin Knowledge Systems (Christian Groessler).
-
-2001-10-24  Tim Waugh  <twaugh@redhat.com>
-	
-	* ieee1284_ops.c (parport_ieee1284_ecp_read_data): Try to minimise
-	turnaround time.
-
-	* ieee1284.c (parport_poll_peripheral): Try a couple of times
-	first without delaying.
-
-2001-10-10  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c: Support for OX16PCI954 PCI card.
-
-2001-10-10  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c: Support for OX12PCI840 PCI card (reported by
-	mk@daveg.com).  Lock-ups diagnosed by Ronnie Arosa (and now we
-	just don't trust its ECR).
-
-2001-10-10  Gunther Mayer  <gunther.mayer@braunschweig.okersurf.de>
-
-	* parport_pc.c: Support for AVLAB cards.
-
-2001-10-10  Tim Waugh  <twaugh@redhat.com>
-
-	* ieee1284_ops.c (ecp_forward_to_reverse, ecp_reverse_to_forward):
-	Remember to retry direction switch if it fails.  Patch from David
-	Lambert.
-
-2001-10-08  David C. Hansen  <haveblue@us.ibm.com>
-
-	* share.c: Make driverlist_lock and parportlist_lock static.
-
-2001-10-08  Philip Blundell  <philb@gnu.org>
-
-	* parport_pc.c: New modular parameter verbose_logging.
-	Make port->modes indicate the modes that we are prepared to use,
-	rather than the modes that are available.
-
-2001-10-07  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (parport_pc_probe_port): Fix memory leak spotted by
-	Kipp Cannon.
-
-2001-10-07  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_serial.c: Remove NetMos support, since it causes problems
-	for some people.
-
-2001-08-30  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_serial.c (parport_serial_pci_probe): Clean-up on partial
-	registration failure.
-
-2001-08-14  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (parport_pc_init_superio): Allow for more than one
-	SuperIO device.  Patch from Rich Lio (ITE).
-
-2001-08-11  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c: Support for Titan Electronics cards.
-
-2001-08-08  Tim Waugh  <twaugh@redhat.com>
-
-	* share.c (parport_unregister_device): Remove device from wait list
-	too.
-
-2001-06-20  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c: Make 'io_hi=0' work.
-
-2001-05-31  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_serial.c: New file.
-
-2001-06-05  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (parport_pc_unregister_port): New exported function.
-	Do the opposite of parport_pc_probe_port.
-	(cleanup_module): Use it.
-
-2001-05-22  Juan Quintela  <quintela@mandrakesoft.com>
-
-	* parport_amiga.c: Set printk levels.
-	* parport_gsc.c: Likewise.
-	* parport_mfc3.c: Likewise.
-	* parport_pc.c: Likewise.
-	* parport_sunbpp.c: Likewise.
-	* probe.c: Likewise.
-	* share.c: Likewise.
-
-2001-05-10  Fred Barnes  <frmb2@ukc.ac.uk>
-
-       * parport_pc.c (parport_pc_epp_read_data): added support for
-       reading from a w91284pic peripheral, flag is PARPORT_W91284PIC.
-
-2001-05-07  Fred Barnes  <frmb2@ukc.ac.uk>
- 
- 	* parport_pc.c (parport_pc_epp_read_data,
-	parport_pc_epp_write_data, parport_pc_epp_read_addr,
-	parport_pc_epp_write_addr): support for fast reads/writes using
-	the PARPORT_EPP_FAST flag.
- 
- 	* ieee1284.c (parport_read, parport_write): added code to handle
-	software EPP mode (IEEE1284_MODE_EPPSWE).  Added code to allow
-	BYTE mode reverse transfers (previously always went for NIBBLE
-	mode).
- 
- 	* ieee1284_ops.c (parport_ieee1284_epp_read_data,
-	parport_ieee1284_epp_write_data): fixed various polarity problems.
-	Also (theoretically) fixed address versions (.._addr), but no
-	hardware to test this on.
- 
- 	* parport_pc.h: added parport_dump_state() function for debugging.
- 	Needs to have DEBUG_PARPORT to be defined for it to be included.
- 
-2001-05-03  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c: Fix the compile problem I introduce from the last
-	change.
-
-2001-04-20  Paul Gortmaker  <p_gortmaker@yahoo.com>
-
-	* parport_pc.c: Cut down the size quite a bit (more than 4k off
-	the object, about 1k off the zImage) for the older non-PCI
-	machines which are typically resource starved anyway...
-
-2001-03-26  R Horn  <rjh@world.std.com>
-
-	* parport_pc.c: Some commentary changes.
-
-2001-04-19  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (parport_pc_probe_port): Remove __devinit
-	attribute.  Export unconditionally.
-
-2001-04-14  Jeff Garzik  <jgarzik@pobox.com>
-
-	Merged:  2001-03-30  Tim Waugh  <twaugh@redhat.com>
-
-        * drivers/parport/parport_pc.c: Make Via SuperIO chipsets behave
-        like everything else with respect to irq= and dma= parameters.
-
-2001-04-08  Tim Waugh  <twaugh@redhat.com>
-
-      * parport_pc.c (parport_pc_save_state): Read from the soft copy of
-      the control port.
-      (parport_pc_restore_state): Update the soft copy of the control
-      port.
-
-2001-03-26  Tim Waugh  <twaugh@redhat.com>
-
-	* share.c (parport_find_number, parport_find_base): Trigger
-	a lowlevel driver load if there are no ports yet.
-
-2001-03-26  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (parport_ECP_supported): Remove the IRQ conflict
-	check since it seems totally unreliable.
-
-2001-03-02  Tim Waugh  <twaugh@redhat.com>
-
-	* ieee1284_ops.c (parport_ieee1284_read_nibble): Reset nAutoFd
-	on timeout.  Matches 2.2.x behaviour.
-
-2001-03-02  Andrew Morton
-
-	* parport_pc.c (registered_parport): New static variable.
-	(parport_pc_find_ports): Set it when we register PCI driver.
-	(init_module): Unregister PCI driver if necessary when we
-	fail.
-
-2001-03-02  Tim Waugh  <twaugh@redhat.com>
-
-	* ieee1284_ops.c (parport_ieee1284_write_compat): Don't use
-	down_trylock to reset the IRQ count.  Don't even use sema_init,
-	because it's not even necessary to reset the count.  I can't
-	remember why we ever did.
-
-2001-01-04  Peter Osterlund  <peter.osterlund@mailbox.swipnet.se>
-
-	* ieee1284.c (parport_negotiate): Fix missing printk argument.
-
-2001-01-03  Paul Schleger  <Paul.Schleger@t-online.de>
-
-	* probe.c (parse_data): Get rid of trailing blanks in values.
-	Needed for XEROX XJ8C printer.
-
-2001-01-03  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (parport_pc_probe_port): Say something when probes
-	are omitted.
-
-2001-01-03  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (sio_via_686a_probe): Correct dma=255 fix.
-
-2000-11-21  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (parport_pc_ecp_write_block_pio): Fix
-	reverse-to-forward logic.  Spotted by Roland Kuck
-	<rci@cityweb.de>.
-
-2000-09-16  Cesar Eduardo Barros  <cesarb@nitnet.com.br>
-
-	* parport_pc.c (sio_via_686a_probe): Handle case
-	where hardware returns 255 for IRQ or DMA.
-
-2000-07-20  Eddie C. Dost  <ecd@skynet.be>
-
-	* share.c (attach_driver_chain): attach[i](port) needs to be
-	replaced by attach[count](port).
-
-2000-07-20  Eddie C. Dost  <ecd@skynet.be>
-
-	* daisy.c (add_dev): kmalloc args are in wrong order.
-
-2000-07-12  Tim Waugh  <twaugh@redhat.com>
-
-	* share.c: Documentation for parport_{get,port}_port,
-	parport_find_{number,base}.
-
-2000-07-12  Tim Waugh  <twaugh@redhat.com>
-
-	* share.c (parport_unregister_device): Remove unneeded locking
-	(test cad==dev).
-	(parport_claim): Likewise.
-	(parport_find_number): New function.
-
-2000-07-12  Tim Waugh  <twaugh@redhat.com>
-
-	* share.c (parport_register_port): Hold the parportlist_lock while
-	looking for a free parport number.
-	(parport_register_driver): Make sure that attach can block.
-	(attach_driver_chain): Likewise.
-
-2000-07-12  Tim Waugh  <twaugh@redhat.com>
-
-	* share.c (call_driver_chain): Do reference counting things.
-	(parport_get_port): New function.
-	(parport_put_port): New function.
-	(parport_register_port): Initialise reference count to zero.
-	(parport_unregister_port): Check reference count rather than
-	driver list to see if we can free the port.
-
-2000-07-12  Tim Waugh  <twaugh@redhat.com>
-
-	* share.c: Clarifications in doc comments.
-
-2000-07-12  Tim Waugh  <twaugh@redhat.com>
-
-	* share.c (parport_unregister_port): Fix typo in comment.
-
-2000-07-11  Gunther Mayer  <gunther.mayer@braunschweig.okersurf.de>
-
-	* parport_pc.c: Support for the full range of Timedia cards.
-
-2000-07-08  Tim Waugh  <twaugh@redhat.com>
-
-	* daisy.c: License block comments as part of parportbook.
-	* ieee1284.c: Likewise.
-	* share.c: Likewise.
-
-2000-06-30  Petr Vandrovec  <vandrove@vc.cvut.cz>
-
-	* procfs.c (do_hardware_modes): Generated string can be up to 34
-	chars long.
-
-2000-06-20  Gunther Mayer  <gunther.mayer@braunschweig.okersurf.de>
-
-	* parport_pc.c (parport_pc_compat_write_block_pio): Warn about
-	change_mode failures.
-	(parport_pc_ecp_write_block_pio): Likewise.
-	(parport_pc_ecp_read_block_pio): Likewise.
-
-2000-06-20  Gunther Mayer  <gunther.mayer@braunschweig.okersurf.de>
-
-	* parport_pc.c (parport_SPP_supported): Warn more about possibly
-	incorrect parameters.
-
-2000-06-15  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (parport_ECP_supported): Set PARPORT_MODE_COMPAT
-	for ECP ports, since they can all do hardware accelerated
-	compatibility mode (I assume).
-
-2000-06-13  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (cleanup_module): Remark about possible bugs.
-
-2000-06-13  Tim Waugh  <twaugh@redhat.com>
-
-	* procfs.c: Break 'hardware' out into separate files.
-
-2000-05-28  Gunther Mayer  <gunther.mayer@braunschweig.okersurf.de>
-
-	* Fix PCI ID printk for non-superio PCI cards.
-
-2000-05-28  Tim Waugh  <twaugh@redhat.com>
-
-	* share.c (call_driver_chain): Get the driverlist_lock.
-	(parport_register_device): Make sure that port->devices always
-	looks consistent.
-	(parport_register_driver): Ensure that parport drivers are given
-	parameters that are valid for the duration of the callback by
-	locking the portlist against changes.
-	(parport_unregister_driver): Likewise.
-	(parport_claim): Don't overwrite flags.
-
-2000-05-28  Tim Waugh  <twaugh@redhat.com>
-
-	* daisy.c (assign_addrs): Avoid double-probing daisy-chain devices
-	if the first probe succeeds.
-
-2000-05-16  Tim Waugh  <twaugh@redhat.com>
-
-	* share.c (parport_claim): Fix SMP race.
-
-2000-05-15  Gunther Mayer  <gunther.mayer@braunschweig.okersurf.de>
-
-	* parport_pc.c (parport_pc_compat_write_block_pio): Check for
-	timeouts.
-	(parport_pc_ecp_write_block_pio): Likewise.
-	(parport_pc_ecp_read_block_pio): Likewise.
-
-2000-05-02  Gunther Mayer  <gunther.mayer@braunschweig.okersurf.de>
-
-	* parport_pc.c: PCI SYBA patch and verbose PCI detection.
-
-2000-05-02  Gunther Mayer  <gunther.mayer@braunschweig.okersurf.de>
-
-	* parport_pc.c (decode_smsc): Fix SMSC 665/666 identification.
-
-2000-04-28  Tim Waugh  <twaugh@redhat.com>
-
-	* ieee1284.c: Short function descriptions can't be multiline.
-
-	* daisy.c: Short function descriptions can't be multiline.
-
-2000-04-19  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (parport_pc_fifo_write_block_dma): Make maxlen
-	calculation a bit clearer.
-
-	* ieee1284.c (parport_negotiate): Turn on data line drivers.
-
-	* ieee1284_ops.c (parport_ieee1284_read_byte): Turn off data line
-	drivers.
-	(parport_ieee1284_write_compat): Turn on data line drivers.
-
-	* daisy.c (assign_addrs): Turn on data line drivers.
-	(cpp_mux): Likewise.
-	(cpp_daisy): Likewise.
-
-2000-04-04  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c: Add support for another PCI card.
-
-2000-04-04  Tim Waugh  <twaugh@redhat.com>
-
-	* daisy.c: Documentation in kernel-doc format.
-
-	* ieee1284.c: Likewise.
-
-	* share.c: Likewise.
-
-2000-04-01  Tim Waugh  <twaugh@redhat.com>
-
-	* share.c (parport_register_device): Need to hold the module
-	reference counts before sleeping.
-
-2000-03-27  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (parport_pc_ecp_read_block_pio): Correct operation
-	when peripheral is trying to send data when we stop listening.
-
-2000-03-22  Tim Waugh  <twaugh@redhat.com>
-
-	* init.c (parport_setup): Fix return value.
-
-2000-03-21  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (parport_pc_pci_probe): Fix return value; call
-	pci_enable_device.
-
-2000-03-16  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (parport_ECP_supported): This seems to trigger on
-	machines that don't have an IRQ conflict; toned down the warning
-	message accordingly.
-
-2000-03-16  Gunther Mayer  <gunther.mayer@braunschweig.netsurf.de>
-
-	* parport_pc.c (show_parconfig_smsc37c669): Fix typo.
-	(decode_winbond): More IDs.
-	(winbond_check): Protect against false positives.
-	(winbond_check2): Likewise.
-	(smsc_check): Likewise.
-
-2000-03-15  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (cleanup_module): Don't call pci_unregister_driver
-	if we didn't call pci_register_driver first.
-
-2000-03-13  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (parport_pc_init): Moved from asm/parport.h.
-
-	* Config.in: CONFIG_PARPORT_PC_SUPERIO: new option.
-
-	* parport_pc.c (show_parconfig_smsc37c669): Make __devinit.
-	(show_parconfig_winbond): Likewise.
-	(decode_winbond): Likewise.
-	(decode_smsc): Likewise.
-	(winbond_check): Likewise.
-	(winbond_check2): Likewise.
-	(smsc_check): Likewise.
-	(detect_and_report_winbond): Likewise.
-	(detect_and_report_smsc): Likewise.
-	(get_superio_dma): Likewise.
-	(get_superio_irq): Likewise.
-	(parport_pc_find_isa_ports): New function.
-	(parport_pc_find_ports): New function.
-	(init_module): Make superio a config option, not a parameter.
-
-2000-03-10  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (decode_winbond): Use correct 83877ATF chip ID.
-	(decode_winbond): Fix typo.
-
-2000-03-09  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c: Integrate SuperIO PCI probe with normal PCI card
-	probe, so that the MODULE_DEVICE_TABLE is complete.
-
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index 3d102dd87c9f..0b51857fbaf7 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -48,6 +48,7 @@ obj-$(CONFIG_PPC) += setup-bus.o
 obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o
 obj-$(CONFIG_X86_VISWS) += setup-irq.o
 obj-$(CONFIG_MN10300) += setup-bus.o
+obj-$(CONFIG_MICROBLAZE) += setup-bus.o
 
 #
 # ACPI Related PCI FW Functions
diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
index 712250f5874a..26301cb25e7f 100644
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -288,9 +288,9 @@ void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
 			next = dev->bus_list.next;
 
 		/* Run device routines with the device locked */
-		down(&dev->dev.sem);
+		device_lock(&dev->dev);
 		retval = cb(dev, userdata);
-		up(&dev->dev.sem);
+		device_unlock(&dev->dev);
 		if (retval)
 			break;
 	}
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index cb2fd01eddae..b5dad9f37453 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -749,6 +749,24 @@ static int acpiphp_bus_trim(acpi_handle handle)
 	return retval;
 }
 
+static void acpiphp_set_acpi_region(struct acpiphp_slot *slot)
+{
+	struct acpiphp_func *func;
+	union acpi_object params[2];
+	struct acpi_object_list arg_list;
+
+	list_for_each_entry(func, &slot->funcs, sibling) {
+		arg_list.count = 2;
+		arg_list.pointer = params;
+		params[0].type = ACPI_TYPE_INTEGER;
+		params[0].integer.value = ACPI_ADR_SPACE_PCI_CONFIG;
+		params[1].type = ACPI_TYPE_INTEGER;
+		params[1].integer.value = 1;
+		/* _REG is optional, we don't care about if there is failure */
+		acpi_evaluate_object(func->handle, "_REG", &arg_list, NULL);
+	}
+}
+
 /**
  * enable_device - enable, configure a slot
  * @slot: slot to be enabled
@@ -805,6 +823,7 @@ static int __ref enable_device(struct acpiphp_slot *slot)
 	pci_bus_assign_resources(bus);
 	acpiphp_sanitize_bus(bus);
 	acpiphp_set_hpp_values(bus);
+	acpiphp_set_acpi_region(slot);
 	pci_enable_bridges(bus);
 	pci_bus_add_devices(bus);
 
diff --git a/drivers/pci/hotplug/fakephp.c b/drivers/pci/hotplug/fakephp.c
index 6151389fd903..0a894efd4b9b 100644
--- a/drivers/pci/hotplug/fakephp.c
+++ b/drivers/pci/hotplug/fakephp.c
@@ -73,7 +73,7 @@ static void legacy_release(struct kobject *kobj)
 }
 
 static struct kobj_type legacy_ktype = {
-	.sysfs_ops = &(struct sysfs_ops){
+	.sysfs_ops = &(const struct sysfs_ops){
 		.store = legacy_store, .show = legacy_show
 	},
 	.release = &legacy_release,
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index 807224ec8351..997668558e79 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -642,6 +642,7 @@ void pci_create_legacy_files(struct pci_bus *b)
 	if (!b->legacy_io)
 		goto kzalloc_err;
 
+	sysfs_bin_attr_init(b->legacy_io);
 	b->legacy_io->attr.name = "legacy_io";
 	b->legacy_io->size = 0xffff;
 	b->legacy_io->attr.mode = S_IRUSR | S_IWUSR;
@@ -655,6 +656,7 @@ void pci_create_legacy_files(struct pci_bus *b)
 
 	/* Allocated above after the legacy_io struct */
 	b->legacy_mem = b->legacy_io + 1;
+	sysfs_bin_attr_init(b->legacy_mem);
 	b->legacy_mem->attr.name = "legacy_mem";
 	b->legacy_mem->size = 1024*1024;
 	b->legacy_mem->attr.mode = S_IRUSR | S_IWUSR;
@@ -800,6 +802,7 @@ static int pci_create_attr(struct pci_dev *pdev, int num, int write_combine)
 	if (res_attr) {
 		char *res_attr_name = (char *)(res_attr + 1);
 
+		sysfs_bin_attr_init(res_attr);
 		if (write_combine) {
 			pdev->res_attr_wc[num] = res_attr;
 			sprintf(res_attr_name, "resource%d_wc", num);
@@ -972,6 +975,7 @@ static int pci_create_capabilities_sysfs(struct pci_dev *dev)
 		if (!attr)
 			return -ENOMEM;
 
+		sysfs_bin_attr_init(attr);
 		attr->size = dev->vpd->len;
 		attr->attr.name = "vpd";
 		attr->attr.mode = S_IRUSR | S_IWUSR;
@@ -1038,6 +1042,7 @@ int __must_check pci_create_sysfs_dev_files (struct pci_dev *pdev)
 			retval = -ENOMEM;
 			goto err_resource_files;
 		}
+		sysfs_bin_attr_init(attr);
 		attr->size = rom_size;
 		attr->attr.name = "rom";
 		attr->attr.mode = S_IRUSR;
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 77b493b3d97b..cb1dd5f4988c 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1583,8 +1583,10 @@ void pci_pm_init(struct pci_dev *dev)
 	int pm;
 	u16 pmc;
 
+	pm_runtime_forbid(&dev->dev);
 	device_enable_async_suspend(&dev->dev);
 	dev->wakeup_prepared = false;
+
 	dev->pm_cap = 0;
 
 	/* find PCI PM capability in list */
@@ -2296,35 +2298,6 @@ void pci_msi_off(struct pci_dev *dev)
 	}
 }
 
-#ifndef HAVE_ARCH_PCI_SET_DMA_MASK
-/*
- * These can be overridden by arch-specific implementations
- */
-int
-pci_set_dma_mask(struct pci_dev *dev, u64 mask)
-{
-	if (!pci_dma_supported(dev, mask))
-		return -EIO;
-
-	dev->dma_mask = mask;
-	dev_dbg(&dev->dev, "using %dbit DMA mask\n", fls64(mask));
-
-	return 0;
-}
-    
-int
-pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
-{
-	if (!pci_dma_supported(dev, mask))
-		return -EIO;
-
-	dev->dev.coherent_dma_mask = mask;
-	dev_dbg(&dev->dev, "using %dbit consistent DMA mask\n", fls64(mask));
-
-	return 0;
-}
-#endif
-
 #ifndef HAVE_ARCH_PCI_SET_DMA_MAX_SEGMENT_SIZE
 int pci_set_dma_max_seg_size(struct pci_dev *dev, unsigned int size)
 {
@@ -2486,7 +2459,7 @@ static int pci_dev_reset(struct pci_dev *dev, int probe)
 	if (!probe) {
 		pci_block_user_cfg_access(dev);
 		/* block PM suspend, driver probe, etc. */
-		down(&dev->dev.sem);
+		device_lock(&dev->dev);
 	}
 
 	rc = pci_dev_specific_reset(dev, probe);
@@ -2508,7 +2481,7 @@ static int pci_dev_reset(struct pci_dev *dev, int probe)
 	rc = pci_parent_bus_reset(dev, probe);
 done:
 	if (!probe) {
-		up(&dev->dev.sem);
+		device_unlock(&dev->dev);
 		pci_unblock_user_cfg_access(dev);
 	}
 
@@ -3066,8 +3039,6 @@ EXPORT_SYMBOL(pci_set_mwi);
 EXPORT_SYMBOL(pci_try_set_mwi);
 EXPORT_SYMBOL(pci_clear_mwi);
 EXPORT_SYMBOL_GPL(pci_intx);
-EXPORT_SYMBOL(pci_set_dma_mask);
-EXPORT_SYMBOL(pci_set_consistent_dma_mask);
 EXPORT_SYMBOL(pci_assign_resource);
 EXPORT_SYMBOL(pci_find_parent_resource);
 EXPORT_SYMBOL(pci_select_bars);
diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c
index 49c9e6c9779a..f75a44d37fbe 100644
--- a/drivers/pci/slot.c
+++ b/drivers/pci/slot.c
@@ -29,7 +29,7 @@ static ssize_t pci_slot_attr_store(struct kobject *kobj,
 	return attribute->store ? attribute->store(slot, buf, len) : -EIO;
 }
 
-static struct sysfs_ops pci_slot_sysfs_ops = {
+static const struct sysfs_ops pci_slot_sysfs_ops = {
 	.show = pci_slot_attr_show,
 	.store = pci_slot_attr_store,
 };
diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c
index 0f98be4450b7..ad93ebd7b2a2 100644
--- a/drivers/pcmcia/ds.c
+++ b/drivers/pcmcia/ds.c
@@ -971,9 +971,9 @@ static int runtime_suspend(struct device *dev)
 {
 	int rc;
 
-	down(&dev->sem);
+	device_lock(dev);
 	rc = pcmcia_dev_suspend(dev, PMSG_SUSPEND);
-	up(&dev->sem);
+	device_unlock(dev);
 	return rc;
 }
 
@@ -981,9 +981,9 @@ static int runtime_resume(struct device *dev)
 {
 	int rc;
 
-	down(&dev->sem);
+	device_lock(dev);
 	rc = pcmcia_dev_resume(dev);
-	up(&dev->sem);
+	device_unlock(dev);
 	return rc;
 }
 
diff --git a/drivers/pcmcia/i82092.c b/drivers/pcmcia/i82092.c
index a04f21c8170f..f5da62653313 100644
--- a/drivers/pcmcia/i82092.c
+++ b/drivers/pcmcia/i82092.c
@@ -133,6 +133,7 @@ static int __devinit i82092aa_pci_probe(struct pci_dev *dev, const struct pci_de
 		sockets[i].socket.map_size = 0x1000;
 		sockets[i].socket.irq_mask = 0;
 		sockets[i].socket.pci_irq  = dev->irq;
+		sockets[i].socket.cb_dev  = dev;
 		sockets[i].socket.owner = THIS_MODULE;
 
 		sockets[i].number = i;
diff --git a/drivers/pcmcia/i82365.h b/drivers/pcmcia/i82365.h
index 849ef1b5d687..3f84d7a2dc84 100644
--- a/drivers/pcmcia/i82365.h
+++ b/drivers/pcmcia/i82365.h
@@ -95,6 +95,7 @@
 #define I365_CSC_DETECT	0x08
 #define I365_CSC_ANY	0x0F
 #define I365_CSC_GPI	0x10
+#define I365_CSC_IRQ_MASK	0xF0
 
 /* Flags for I365_ADDRWIN */
 #define I365_ENA_IO(map)	(0x40 << (map))
diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c
index b2df04199a21..c4612c52e4cb 100644
--- a/drivers/pcmcia/pcmcia_resource.c
+++ b/drivers/pcmcia/pcmcia_resource.c
@@ -256,6 +256,7 @@ int pcmcia_modify_configuration(struct pcmcia_device *p_dev,
 {
 	struct pcmcia_socket *s;
 	config_t *c;
+	int ret;
 
 	s = p_dev->socket;
 
@@ -264,13 +265,13 @@ int pcmcia_modify_configuration(struct pcmcia_device *p_dev,
 
 	if (!(s->state & SOCKET_PRESENT)) {
 		dev_dbg(&s->dev, "No card present\n");
-		mutex_unlock(&s->ops_mutex);
-		return -ENODEV;
+		ret = -ENODEV;
+		goto unlock;
 	}
 	if (!(c->state & CONFIG_LOCKED)) {
 		dev_dbg(&s->dev, "Configuration isnt't locked\n");
-		mutex_unlock(&s->ops_mutex);
-		return -EACCES;
+		ret = -EACCES;
+		goto unlock;
 	}
 
 	if (mod->Attributes & CONF_IRQ_CHANGE_VALID) {
@@ -286,7 +287,8 @@ int pcmcia_modify_configuration(struct pcmcia_device *p_dev,
 
 	if (mod->Attributes & CONF_VCC_CHANGE_VALID) {
 		dev_dbg(&s->dev, "changing Vcc is not allowed at this time\n");
-		return -EINVAL;
+		ret = -EINVAL;
+		goto unlock;
 	}
 
 	/* We only allow changing Vpp1 and Vpp2 to the same value */
@@ -294,21 +296,21 @@ int pcmcia_modify_configuration(struct pcmcia_device *p_dev,
 	    (mod->Attributes & CONF_VPP2_CHANGE_VALID)) {
 		if (mod->Vpp1 != mod->Vpp2) {
 			dev_dbg(&s->dev, "Vpp1 and Vpp2 must be the same\n");
-			mutex_unlock(&s->ops_mutex);
-			return -EINVAL;
+			ret = -EINVAL;
+			goto unlock;
 		}
 		s->socket.Vpp = mod->Vpp1;
 		if (s->ops->set_socket(s, &s->socket)) {
-			mutex_unlock(&s->ops_mutex);
 			dev_printk(KERN_WARNING, &s->dev,
 				   "Unable to set VPP\n");
-			return -EIO;
+			ret = -EIO;
+			goto unlock;
 		}
 	} else if ((mod->Attributes & CONF_VPP1_CHANGE_VALID) ||
 		   (mod->Attributes & CONF_VPP2_CHANGE_VALID)) {
 		dev_dbg(&s->dev, "changing Vcc is not allowed at this time\n");
-		mutex_unlock(&s->ops_mutex);
-		return -EINVAL;
+		ret = -EINVAL;
+		goto unlock;
 	}
 
 	if (mod->Attributes & CONF_IO_CHANGE_WIDTH) {
@@ -332,9 +334,11 @@ int pcmcia_modify_configuration(struct pcmcia_device *p_dev,
 			s->ops->set_io_map(s, &io_on);
 		}
 	}
+	ret = 0;
+unlock:
 	mutex_unlock(&s->ops_mutex);
 
-	return 0;
+	return ret;
 } /* modify_configuration */
 EXPORT_SYMBOL(pcmcia_modify_configuration);
 
@@ -752,14 +756,6 @@ int pcmcia_request_irq(struct pcmcia_device *p_dev, irq_req_t *req)
 
 #ifdef CONFIG_PCMCIA_PROBE
 
-#ifdef IRQ_NOAUTOEN
-	/* if the underlying IRQ infrastructure allows for it, only allocate
-	 * the IRQ, but do not enable it
-	 */
-	if (!(req->Handler))
-		type |= IRQ_NOAUTOEN;
-#endif /* IRQ_NOAUTOEN */
-
 	if (s->irq.AssignedIRQ != 0) {
 		/* If the interrupt is already assigned, it must be the same */
 		irq = s->irq.AssignedIRQ;
diff --git a/drivers/pcmcia/pd6729.c b/drivers/pcmcia/pd6729.c
index 7c204910a777..7ba57a565cd7 100644
--- a/drivers/pcmcia/pd6729.c
+++ b/drivers/pcmcia/pd6729.c
@@ -671,6 +671,7 @@ static int __devinit pd6729_pci_probe(struct pci_dev *dev,
 		socket[i].socket.map_size = 0x1000;
 		socket[i].socket.irq_mask = mask;
 		socket[i].socket.pci_irq  = dev->irq;
+		socket[i].socket.cb_dev = dev;
 		socket[i].socket.owner = THIS_MODULE;
 
 		socket[i].number = i;
diff --git a/drivers/pcmcia/sa1111_generic.c b/drivers/pcmcia/sa1111_generic.c
index de6bc333d299..db79ca61cf96 100644
--- a/drivers/pcmcia/sa1111_generic.c
+++ b/drivers/pcmcia/sa1111_generic.c
@@ -21,11 +21,18 @@
 
 #include "sa1111_generic.h"
 
+#define IDX_IRQ_S0_READY_NINT	(0)
+#define IDX_IRQ_S0_CD_VALID	(1)
+#define IDX_IRQ_S0_BVD1_STSCHG	(2)
+#define IDX_IRQ_S1_READY_NINT	(3)
+#define IDX_IRQ_S1_CD_VALID	(4)
+#define IDX_IRQ_S1_BVD1_STSCHG	(5)
+
 static struct pcmcia_irqs irqs[] = {
-	{ 0, IRQ_S0_CD_VALID,    "SA1111 PCMCIA card detect" },
-	{ 0, IRQ_S0_BVD1_STSCHG, "SA1111 PCMCIA BVD1"        },
-	{ 1, IRQ_S1_CD_VALID,    "SA1111 CF card detect"     },
-	{ 1, IRQ_S1_BVD1_STSCHG, "SA1111 CF BVD1"            },
+	{ 0, NO_IRQ, "SA1111 PCMCIA card detect" },
+	{ 0, NO_IRQ, "SA1111 PCMCIA BVD1"        },
+	{ 1, NO_IRQ, "SA1111 CF card detect"     },
+	{ 1, NO_IRQ, "SA1111 CF BVD1"            },
 };
 
 static int sa1111_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
@@ -136,7 +143,9 @@ int sa1111_pcmcia_add(struct sa1111_dev *dev, struct pcmcia_low_level *ops,
 		s->soc.ops = ops;
 		s->soc.socket.owner = ops->owner;
 		s->soc.socket.dev.parent = &dev->dev;
-		s->soc.socket.pci_irq = s->soc.nr ? IRQ_S1_READY_NINT : IRQ_S0_READY_NINT;
+		s->soc.socket.pci_irq = s->soc.nr ?
+				dev->irq[IDX_IRQ_S0_READY_NINT] :
+				dev->irq[IDX_IRQ_S1_READY_NINT];
 		s->dev = dev;
 
 		ret = add(&s->soc);
@@ -162,6 +171,12 @@ static int pcmcia_probe(struct sa1111_dev *dev)
 
 	base = dev->mapbase;
 
+	/* Initialize PCMCIA IRQs */
+	irqs[0].irq = dev->irq[IDX_IRQ_S0_CD_VALID];
+	irqs[1].irq = dev->irq[IDX_IRQ_S0_BVD1_STSCHG];
+	irqs[2].irq = dev->irq[IDX_IRQ_S1_CD_VALID];
+	irqs[3].irq = dev->irq[IDX_IRQ_S1_BVD1_STSCHG];
+
 	/*
 	 * Initialise the suspend state.
 	 */
diff --git a/drivers/pcmcia/ti113x.h b/drivers/pcmcia/ti113x.h
index aaa70227bfb0..9ffa97d0b16c 100644
--- a/drivers/pcmcia/ti113x.h
+++ b/drivers/pcmcia/ti113x.h
@@ -296,7 +296,7 @@ static int ti_init(struct yenta_socket *socket)
 	u8 new, reg = exca_readb(socket, I365_INTCTL);
 
 	new = reg & ~I365_INTR_ENA;
-	if (socket->cb_irq)
+	if (socket->dev->irq)
 		new |= I365_INTR_ENA;
 	if (new != reg)
 		exca_writeb(socket, I365_INTCTL, new);
@@ -316,14 +316,47 @@ static int ti_override(struct yenta_socket *socket)
 	return 0;
 }
 
+static void ti113x_use_isa_irq(struct yenta_socket *socket)
+{
+	int isa_irq = -1;
+	u8 intctl;
+	u32 isa_irq_mask = 0;
+
+	if (!isa_probe)
+		return;
+
+	/* get a free isa int */
+	isa_irq_mask = yenta_probe_irq(socket, isa_interrupts);
+	if (!isa_irq_mask)
+		return; /* no useable isa irq found */
+
+	/* choose highest available */
+	for (; isa_irq_mask; isa_irq++)
+		isa_irq_mask >>= 1;
+	socket->cb_irq = isa_irq;
+
+	exca_writeb(socket, I365_CSCINT, (isa_irq << 4));
+
+	intctl = exca_readb(socket, I365_INTCTL);
+	intctl &= ~(I365_INTR_ENA | I365_IRQ_MASK);     /* CSC Enable */
+	exca_writeb(socket, I365_INTCTL, intctl);
+
+	dev_info(&socket->dev->dev,
+		"Yenta TI113x: using isa irq %d for CardBus\n", isa_irq);
+}
+
+
 static int ti113x_override(struct yenta_socket *socket)
 {
 	u8 cardctl;
 
 	cardctl = config_readb(socket, TI113X_CARD_CONTROL);
 	cardctl &= ~(TI113X_CCR_PCI_IRQ_ENA | TI113X_CCR_PCI_IREQ | TI113X_CCR_PCI_CSC);
-	if (socket->cb_irq)
+	if (socket->dev->irq)
 		cardctl |= TI113X_CCR_PCI_IRQ_ENA | TI113X_CCR_PCI_CSC | TI113X_CCR_PCI_IREQ;
+	else
+		ti113x_use_isa_irq(socket);
+
 	config_writeb(socket, TI113X_CARD_CONTROL, cardctl);
 
 	return ti_override(socket);
diff --git a/drivers/pcmcia/vrc4171_card.c b/drivers/pcmcia/vrc4171_card.c
index c9fcbdc164ea..aaccdb9f4ba1 100644
--- a/drivers/pcmcia/vrc4171_card.c
+++ b/drivers/pcmcia/vrc4171_card.c
@@ -105,6 +105,7 @@ typedef struct vrc4171_socket {
 	char name[24];
 	int csc_irq;
 	int io_irq;
+	spinlock_t lock;
 } vrc4171_socket_t;
 
 static vrc4171_socket_t vrc4171_sockets[CARD_MAX_SLOTS];
@@ -327,7 +328,7 @@ static int pccard_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
 	slot = sock->sock;
 	socket = &vrc4171_sockets[slot];
 
-	spin_lock_irq(&sock->lock);
+	spin_lock_irq(&socket->lock);
 
 	voltage = set_Vcc_value(state->Vcc);
 	exca_write_byte(slot, CARD_VOLTAGE_SELECT, voltage);
@@ -370,7 +371,7 @@ static int pccard_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
 		cscint |= I365_CSC_DETECT;
         exca_write_byte(slot, I365_CSCINT, cscint);
 
-	spin_unlock_irq(&sock->lock);
+	spin_unlock_irq(&socket->lock);
 
 	return 0;
 }
diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c
index 967c766f53ba..418988ab6edf 100644
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -42,6 +42,18 @@ module_param_string(o2_speedup, o2_speedup, sizeof(o2_speedup), 0444);
 MODULE_PARM_DESC(o2_speedup, "Use prefetch/burst for O2-bridges: 'on', 'off' "
 	"or 'default' (uses recommended behaviour for the detected bridge)");
 
+/*
+ * Only probe "regular" interrupts, don't
+ * touch dangerous spots like the mouse irq,
+ * because there are mice that apparently
+ * get really confused if they get fondled
+ * too intimately.
+ *
+ * Default to 11, 10, 9, 7, 6, 5, 4, 3.
+ */
+static u32 isa_interrupts = 0x0ef8;
+
+
 #define debug(x, s, args...) dev_dbg(&s->dev->dev, x, ##args)
 
 /* Don't ask.. */
@@ -54,6 +66,8 @@ MODULE_PARM_DESC(o2_speedup, "Use prefetch/burst for O2-bridges: 'on', 'off' "
  */
 #ifdef CONFIG_YENTA_TI
 static int yenta_probe_cb_irq(struct yenta_socket *socket);
+static unsigned int yenta_probe_irq(struct yenta_socket *socket,
+				u32 isa_irq_mask);
 #endif
 
 
@@ -329,8 +343,8 @@ static int yenta_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
 		/* ISA interrupt control? */
 		intr = exca_readb(socket, I365_INTCTL);
 		intr = (intr & ~0xf);
-		if (!socket->cb_irq) {
-			intr |= state->io_irq;
+		if (!socket->dev->irq) {
+			intr |= socket->cb_irq ? socket->cb_irq : state->io_irq;
 			bridge |= CB_BRIDGE_INTR;
 		}
 		exca_writeb(socket, I365_INTCTL, intr);
@@ -340,7 +354,7 @@ static int yenta_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
 		reg = exca_readb(socket, I365_INTCTL) & (I365_RING_ENA | I365_INTR_ENA);
 		reg |= (state->flags & SS_RESET) ? 0 : I365_PC_RESET;
 		reg |= (state->flags & SS_IOCARD) ? I365_PC_IOCARD : 0;
-		if (state->io_irq != socket->cb_irq) {
+		if (state->io_irq != socket->dev->irq) {
 			reg |= state->io_irq;
 			bridge |= CB_BRIDGE_INTR;
 		}
@@ -356,7 +370,9 @@ static int yenta_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
 			exca_writeb(socket, I365_POWER, reg);
 
 		/* CSC interrupt: no ISA irq for CSC */
-		reg = I365_CSC_DETECT;
+		reg = exca_readb(socket, I365_CSCINT);
+		reg &= I365_CSC_IRQ_MASK;
+		reg |= I365_CSC_DETECT;
 		if (state->flags & SS_IOCARD) {
 			if (state->csc_mask & SS_STSCHG)
 				reg |= I365_CSC_STSCHG;
@@ -896,22 +912,12 @@ static struct cardbus_type cardbus_type[] = {
 };
 
 
-/*
- * Only probe "regular" interrupts, don't
- * touch dangerous spots like the mouse irq,
- * because there are mice that apparently
- * get really confused if they get fondled
- * too intimately.
- *
- * Default to 11, 10, 9, 7, 6, 5, 4, 3.
- */
-static u32 isa_interrupts = 0x0ef8;
-
 static unsigned int yenta_probe_irq(struct yenta_socket *socket, u32 isa_irq_mask)
 {
 	int i;
 	unsigned long val;
 	u32 mask;
+	u8 reg;
 
 	/*
 	 * Probe for usable interrupts using the force
@@ -919,6 +925,7 @@ static unsigned int yenta_probe_irq(struct yenta_socket *socket, u32 isa_irq_mas
 	 */
 	cb_writel(socket, CB_SOCKET_EVENT, -1);
 	cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK);
+	reg = exca_readb(socket, I365_CSCINT);
 	exca_writeb(socket, I365_CSCINT, 0);
 	val = probe_irq_on() & isa_irq_mask;
 	for (i = 1; i < 16; i++) {
@@ -930,7 +937,7 @@ static unsigned int yenta_probe_irq(struct yenta_socket *socket, u32 isa_irq_mas
 		cb_writel(socket, CB_SOCKET_EVENT, -1);
 	}
 	cb_writel(socket, CB_SOCKET_MASK, 0);
-	exca_writeb(socket, I365_CSCINT, 0);
+	exca_writeb(socket, I365_CSCINT, reg);
 
 	mask = probe_irq_mask(val) & 0xffff;
 
@@ -967,6 +974,8 @@ static irqreturn_t yenta_probe_handler(int irq, void *dev_id)
 /* probes the PCI interrupt, use only on override functions */
 static int yenta_probe_cb_irq(struct yenta_socket *socket)
 {
+	u8 reg;
+
 	if (!socket->cb_irq)
 		return -1;
 
@@ -979,7 +988,8 @@ static int yenta_probe_cb_irq(struct yenta_socket *socket)
 	}
 
 	/* generate interrupt, wait */
-	exca_writeb(socket, I365_CSCINT, I365_CSC_STSCHG);
+	reg = exca_readb(socket, I365_CSCINT);
+	exca_writeb(socket, I365_CSCINT, reg | I365_CSC_STSCHG);
 	cb_writel(socket, CB_SOCKET_EVENT, -1);
 	cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK);
 	cb_writel(socket, CB_SOCKET_FORCE, CB_FCARDSTS);
@@ -988,7 +998,7 @@ static int yenta_probe_cb_irq(struct yenta_socket *socket)
 
 	/* disable interrupts */
 	cb_writel(socket, CB_SOCKET_MASK, 0);
-	exca_writeb(socket, I365_CSCINT, 0);
+	exca_writeb(socket, I365_CSCINT, reg);
 	cb_writel(socket, CB_SOCKET_EVENT, -1);
 	exca_readb(socket, I365_CSC);
 
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index cd2ee6fce1b4..e631dbeafd79 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -150,6 +150,7 @@ config MSI_LAPTOP
 	tristate "MSI Laptop Extras"
 	depends on ACPI
 	depends on BACKLIGHT_CLASS_DEVICE
+	depends on RFKILL
 	---help---
 	  This is a driver for laptops built by MSI (MICRO-STAR
 	  INTERNATIONAL):
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index 226b3e93498c..cbca40aa4006 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -922,9 +922,13 @@ static struct backlight_ops acer_bl_ops = {
 
 static int __devinit acer_backlight_init(struct device *dev)
 {
+	struct backlight_properties props;
 	struct backlight_device *bd;
 
-	bd = backlight_device_register("acer-wmi", dev, NULL, &acer_bl_ops);
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.max_brightness = max_brightness;
+	bd = backlight_device_register("acer-wmi", dev, NULL, &acer_bl_ops,
+				       &props);
 	if (IS_ERR(bd)) {
 		printk(ACER_ERR "Could not register Acer backlight device\n");
 		acer_backlight_device = NULL;
@@ -935,7 +939,6 @@ static int __devinit acer_backlight_init(struct device *dev)
 
 	bd->props.power = FB_BLANK_UNBLANK;
 	bd->props.brightness = read_brightness(bd);
-	bd->props.max_brightness = max_brightness;
 	backlight_update_status(bd);
 	return 0;
 }
diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c
index 791fcf321506..db5f7db2ba33 100644
--- a/drivers/platform/x86/asus-laptop.c
+++ b/drivers/platform/x86/asus-laptop.c
@@ -639,12 +639,16 @@ static int asus_backlight_init(struct asus_laptop *asus)
 {
 	struct backlight_device *bd;
 	struct device *dev = &asus->platform_device->dev;
+	struct backlight_properties props;
 
 	if (!acpi_check_handle(asus->handle, METHOD_BRIGHTNESS_GET, NULL) &&
 	    !acpi_check_handle(asus->handle, METHOD_BRIGHTNESS_SET, NULL) &&
 	    lcd_switch_handle) {
+		memset(&props, 0, sizeof(struct backlight_properties));
+		props.max_brightness = 15;
+
 		bd = backlight_device_register(ASUS_LAPTOP_FILE, dev,
-					       asus, &asusbl_ops);
+					       asus, &asusbl_ops, &props);
 		if (IS_ERR(bd)) {
 			pr_err("Could not register asus backlight device\n");
 			asus->backlight_device = NULL;
@@ -653,7 +657,6 @@ static int asus_backlight_init(struct asus_laptop *asus)
 
 		asus->backlight_device = bd;
 
-		bd->props.max_brightness = 15;
 		bd->props.power = FB_BLANK_UNBLANK;
 		bd->props.brightness = asus_read_brightness(bd);
 		backlight_update_status(bd);
diff --git a/drivers/platform/x86/asus_acpi.c b/drivers/platform/x86/asus_acpi.c
index 1381430e1105..ee520357abaa 100644
--- a/drivers/platform/x86/asus_acpi.c
+++ b/drivers/platform/x86/asus_acpi.c
@@ -1481,6 +1481,7 @@ static void asus_acpi_exit(void)
 
 static int __init asus_acpi_init(void)
 {
+	struct backlight_properties props;
 	int result;
 
 	result = acpi_bus_register_driver(&asus_hotk_driver);
@@ -1507,15 +1508,17 @@ static int __init asus_acpi_init(void)
 		return -ENODEV;
 	}
 
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.max_brightness = 15;
 	asus_backlight_device = backlight_device_register("asus", NULL, NULL,
-							  &asus_backlight_data);
+							  &asus_backlight_data,
+							  &props);
 	if (IS_ERR(asus_backlight_device)) {
 		printk(KERN_ERR "Could not register asus backlight device\n");
 		asus_backlight_device = NULL;
 		asus_acpi_exit();
 		return -ENODEV;
 	}
-	asus_backlight_device->props.max_brightness = 15;
 
 	return 0;
 }
diff --git a/drivers/platform/x86/classmate-laptop.c b/drivers/platform/x86/classmate-laptop.c
index 035a7dd65a3f..c696cf1c2616 100644
--- a/drivers/platform/x86/classmate-laptop.c
+++ b/drivers/platform/x86/classmate-laptop.c
@@ -455,18 +455,22 @@ static int cmpc_bl_update_status(struct backlight_device *bd)
 		return -1;
 }
 
-static struct backlight_ops cmpc_bl_ops = {
+static const struct backlight_ops cmpc_bl_ops = {
 	.get_brightness = cmpc_bl_get_brightness,
 	.update_status = cmpc_bl_update_status
 };
 
 static int cmpc_bl_add(struct acpi_device *acpi)
 {
+	struct backlight_properties props;
 	struct backlight_device *bd;
 
-	bd = backlight_device_register("cmpc_bl", &acpi->dev,
-				       acpi->handle, &cmpc_bl_ops);
-	bd->props.max_brightness = 7;
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.max_brightness = 7;
+	bd = backlight_device_register("cmpc_bl", &acpi->dev, acpi->handle,
+				       &cmpc_bl_ops, &props);
+	if (IS_ERR(bd))
+		return PTR_ERR(bd);
 	dev_set_drvdata(&acpi->dev, bd);
 	return 0;
 }
diff --git a/drivers/platform/x86/compal-laptop.c b/drivers/platform/x86/compal-laptop.c
index 2740b40aad9b..71ff1545a93e 100644
--- a/drivers/platform/x86/compal-laptop.c
+++ b/drivers/platform/x86/compal-laptop.c
@@ -291,12 +291,15 @@ static int __init compal_init(void)
 	/* Register backlight stuff */
 
 	if (!acpi_video_backlight_support()) {
-		compalbl_device = backlight_device_register("compal-laptop", NULL, NULL,
-							    &compalbl_ops);
+		struct backlight_properties props;
+		memset(&props, 0, sizeof(struct backlight_properties));
+		props.max_brightness = COMPAL_LCD_LEVEL_MAX - 1;
+		compalbl_device = backlight_device_register("compal-laptop",
+							    NULL, NULL,
+							    &compalbl_ops,
+							    &props);
 		if (IS_ERR(compalbl_device))
 			return PTR_ERR(compalbl_device);
-
-		compalbl_device->props.max_brightness = COMPAL_LCD_LEVEL_MAX-1;
 	}
 
 	ret = platform_driver_register(&compal_driver);
diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c
index ef614979afe9..46435ac4684f 100644
--- a/drivers/platform/x86/dell-laptop.c
+++ b/drivers/platform/x86/dell-laptop.c
@@ -559,10 +559,14 @@ static int __init dell_init(void)
 	release_buffer();
 
 	if (max_intensity) {
-		dell_backlight_device = backlight_device_register(
-			"dell_backlight",
-			&platform_device->dev, NULL,
-			&dell_ops);
+		struct backlight_properties props;
+		memset(&props, 0, sizeof(struct backlight_properties));
+		props.max_brightness = max_intensity;
+		dell_backlight_device = backlight_device_register("dell_backlight",
+								  &platform_device->dev,
+								  NULL,
+								  &dell_ops,
+								  &props);
 
 		if (IS_ERR(dell_backlight_device)) {
 			ret = PTR_ERR(dell_backlight_device);
@@ -570,7 +574,6 @@ static int __init dell_init(void)
 			goto fail_backlight;
 		}
 
-		dell_backlight_device->props.max_brightness = max_intensity;
 		dell_backlight_device->props.brightness =
 			dell_get_intensity(dell_backlight_device);
 		backlight_update_status(dell_backlight_device);
diff --git a/drivers/platform/x86/dell-wmi.c b/drivers/platform/x86/dell-wmi.c
index 1b1dddbd5744..bed764e3ea2a 100644
--- a/drivers/platform/x86/dell-wmi.c
+++ b/drivers/platform/x86/dell-wmi.c
@@ -142,7 +142,7 @@ static struct key_entry *dell_wmi_keymap = dell_legacy_wmi_keymap;
 
 static struct input_dev *dell_wmi_input_dev;
 
-static struct key_entry *dell_wmi_get_entry_by_scancode(int code)
+static struct key_entry *dell_wmi_get_entry_by_scancode(unsigned int code)
 {
 	struct key_entry *key;
 
@@ -153,7 +153,7 @@ static struct key_entry *dell_wmi_get_entry_by_scancode(int code)
 	return NULL;
 }
 
-static struct key_entry *dell_wmi_get_entry_by_keycode(int keycode)
+static struct key_entry *dell_wmi_get_entry_by_keycode(unsigned int keycode)
 {
 	struct key_entry *key;
 
@@ -164,8 +164,8 @@ static struct key_entry *dell_wmi_get_entry_by_keycode(int keycode)
 	return NULL;
 }
 
-static int dell_wmi_getkeycode(struct input_dev *dev, int scancode,
-			       int *keycode)
+static int dell_wmi_getkeycode(struct input_dev *dev,
+				unsigned int scancode, unsigned int *keycode)
 {
 	struct key_entry *key = dell_wmi_get_entry_by_scancode(scancode);
 
@@ -177,13 +177,11 @@ static int dell_wmi_getkeycode(struct input_dev *dev, int scancode,
 	return -EINVAL;
 }
 
-static int dell_wmi_setkeycode(struct input_dev *dev, int scancode, int keycode)
+static int dell_wmi_setkeycode(struct input_dev *dev,
+				unsigned int scancode, unsigned int keycode)
 {
 	struct key_entry *key;
-	int old_keycode;
-
-	if (keycode < 0 || keycode > KEY_MAX)
-		return -EINVAL;
+	unsigned int old_keycode;
 
 	key = dell_wmi_get_entry_by_scancode(scancode);
 	if (key && key->type == KE_KEY) {
diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index 9a844caa3756..3fdf21e0052e 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -1131,18 +1131,20 @@ static int eeepc_backlight_notify(struct eeepc_laptop *eeepc)
 
 static int eeepc_backlight_init(struct eeepc_laptop *eeepc)
 {
+	struct backlight_properties props;
 	struct backlight_device *bd;
 
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.max_brightness = 15;
 	bd = backlight_device_register(EEEPC_LAPTOP_FILE,
-				       &eeepc->platform_device->dev,
-				       eeepc, &eeepcbl_ops);
+				       &eeepc->platform_device->dev, eeepc,
+				       &eeepcbl_ops, &props);
 	if (IS_ERR(bd)) {
 		pr_err("Could not register eeepc backlight device\n");
 		eeepc->backlight_device = NULL;
 		return PTR_ERR(bd);
 	}
 	eeepc->backlight_device = bd;
-	bd->props.max_brightness = 15;
 	bd->props.brightness = read_brightness(bd);
 	bd->props.power = FB_BLANK_UNBLANK;
 	backlight_update_status(bd);
diff --git a/drivers/platform/x86/fujitsu-laptop.c b/drivers/platform/x86/fujitsu-laptop.c
index 5f3320d468f6..c1074b32490e 100644
--- a/drivers/platform/x86/fujitsu-laptop.c
+++ b/drivers/platform/x86/fujitsu-laptop.c
@@ -1126,16 +1126,20 @@ static int __init fujitsu_init(void)
 	/* Register backlight stuff */
 
 	if (!acpi_video_backlight_support()) {
-		fujitsu->bl_device =
-			backlight_device_register("fujitsu-laptop", NULL, NULL,
-						  &fujitsubl_ops);
+		struct backlight_properties props;
+
+		memset(&props, 0, sizeof(struct backlight_properties));
+		max_brightness = fujitsu->max_brightness;
+		props.max_brightness = max_brightness - 1;
+		fujitsu->bl_device = backlight_device_register("fujitsu-laptop",
+							       NULL, NULL,
+							       &fujitsubl_ops,
+							       &props);
 		if (IS_ERR(fujitsu->bl_device)) {
 			ret = PTR_ERR(fujitsu->bl_device);
 			fujitsu->bl_device = NULL;
 			goto fail_sysfs_group;
 		}
-		max_brightness = fujitsu->max_brightness;
-		fujitsu->bl_device->props.max_brightness = max_brightness - 1;
 		fujitsu->bl_device->props.brightness = fujitsu->brightness_level;
 	}
 
diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c
index 3aa57da8b43b..56086363becc 100644
--- a/drivers/platform/x86/hp-wmi.c
+++ b/drivers/platform/x86/hp-wmi.c
@@ -57,7 +57,7 @@ enum hp_wmi_radio {
 	HPWMI_WWAN = 2,
 };
 
-static int __init hp_wmi_bios_setup(struct platform_device *device);
+static int __devinit hp_wmi_bios_setup(struct platform_device *device);
 static int __exit hp_wmi_bios_remove(struct platform_device *device);
 static int hp_wmi_resume_handler(struct device *device);
 
@@ -278,7 +278,7 @@ static DEVICE_ATTR(als, S_IRUGO | S_IWUSR, show_als, set_als);
 static DEVICE_ATTR(dock, S_IRUGO, show_dock, NULL);
 static DEVICE_ATTR(tablet, S_IRUGO, show_tablet, NULL);
 
-static struct key_entry *hp_wmi_get_entry_by_scancode(int code)
+static struct key_entry *hp_wmi_get_entry_by_scancode(unsigned int code)
 {
 	struct key_entry *key;
 
@@ -289,7 +289,7 @@ static struct key_entry *hp_wmi_get_entry_by_scancode(int code)
 	return NULL;
 }
 
-static struct key_entry *hp_wmi_get_entry_by_keycode(int keycode)
+static struct key_entry *hp_wmi_get_entry_by_keycode(unsigned int keycode)
 {
 	struct key_entry *key;
 
@@ -300,7 +300,8 @@ static struct key_entry *hp_wmi_get_entry_by_keycode(int keycode)
 	return NULL;
 }
 
-static int hp_wmi_getkeycode(struct input_dev *dev, int scancode, int *keycode)
+static int hp_wmi_getkeycode(struct input_dev *dev,
+			     unsigned int scancode, unsigned int *keycode)
 {
 	struct key_entry *key = hp_wmi_get_entry_by_scancode(scancode);
 
@@ -312,13 +313,11 @@ static int hp_wmi_getkeycode(struct input_dev *dev, int scancode, int *keycode)
 	return -EINVAL;
 }
 
-static int hp_wmi_setkeycode(struct input_dev *dev, int scancode, int keycode)
+static int hp_wmi_setkeycode(struct input_dev *dev,
+			     unsigned int scancode, unsigned int keycode)
 {
 	struct key_entry *key;
-	int old_keycode;
-
-	if (keycode < 0 || keycode > KEY_MAX)
-		return -EINVAL;
+	unsigned int old_keycode;
 
 	key = hp_wmi_get_entry_by_scancode(scancode);
 	if (key && key->type == KE_KEY) {
@@ -447,7 +446,7 @@ static void cleanup_sysfs(struct platform_device *device)
 	device_remove_file(&device->dev, &dev_attr_tablet);
 }
 
-static int __init hp_wmi_bios_setup(struct platform_device *device)
+static int __devinit hp_wmi_bios_setup(struct platform_device *device)
 {
 	int err;
 	int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0);
diff --git a/drivers/platform/x86/msi-laptop.c b/drivers/platform/x86/msi-laptop.c
index 759763d18e4c..996223a7c009 100644
--- a/drivers/platform/x86/msi-laptop.c
+++ b/drivers/platform/x86/msi-laptop.c
@@ -58,6 +58,7 @@
 #include <linux/dmi.h>
 #include <linux/backlight.h>
 #include <linux/platform_device.h>
+#include <linux/rfkill.h>
 
 #define MSI_DRIVER_VERSION "0.5"
 
@@ -66,6 +67,20 @@
 #define MSI_EC_COMMAND_WIRELESS 0x10
 #define MSI_EC_COMMAND_LCD_LEVEL 0x11
 
+#define MSI_STANDARD_EC_COMMAND_ADDRESS	0x2e
+#define MSI_STANDARD_EC_BLUETOOTH_MASK	(1 << 0)
+#define MSI_STANDARD_EC_WEBCAM_MASK	(1 << 1)
+#define MSI_STANDARD_EC_WLAN_MASK	(1 << 3)
+#define MSI_STANDARD_EC_3G_MASK		(1 << 4)
+
+/* For set SCM load flag to disable BIOS fn key */
+#define MSI_STANDARD_EC_SCM_LOAD_ADDRESS	0x2d
+#define MSI_STANDARD_EC_SCM_LOAD_MASK		(1 << 0)
+
+static int msi_laptop_resume(struct platform_device *device);
+
+#define MSI_STANDARD_EC_DEVICES_EXISTS_ADDRESS	0x2f
+
 static int force;
 module_param(force, bool, 0);
 MODULE_PARM_DESC(force, "Force driver load, ignore DMI data");
@@ -74,6 +89,23 @@ static int auto_brightness;
 module_param(auto_brightness, int, 0);
 MODULE_PARM_DESC(auto_brightness, "Enable automatic brightness control (0: disabled; 1: enabled; 2: don't touch)");
 
+static bool old_ec_model;
+static int wlan_s, bluetooth_s, threeg_s;
+static int threeg_exists;
+
+/* Some MSI 3G netbook only have one fn key to control Wlan/Bluetooth/3G,
+ * those netbook will load the SCM (windows app) to disable the original
+ * Wlan/Bluetooth control by BIOS when user press fn key, then control
+ * Wlan/Bluetooth/3G by SCM (software control by OS). Without SCM, user
+ * cann't on/off 3G module on those 3G netbook.
+ * On Linux, msi-laptop driver will do the same thing to disable the
+ * original BIOS control, then might need use HAL or other userland
+ * application to do the software control that simulate with SCM.
+ * e.g. MSI N034 netbook
+ */
+static bool load_scm_model;
+static struct rfkill *rfk_wlan, *rfk_bluetooth, *rfk_threeg;
+
 /* Hardware access */
 
 static int set_lcd_level(int level)
@@ -130,6 +162,35 @@ static int set_auto_brightness(int enable)
 	return ec_transaction(MSI_EC_COMMAND_LCD_LEVEL, wdata, 2, NULL, 0, 1);
 }
 
+static ssize_t set_device_state(const char *buf, size_t count, u8 mask)
+{
+	int status;
+	u8 wdata = 0, rdata;
+	int result;
+
+	if (sscanf(buf, "%i", &status) != 1 || (status < 0 || status > 1))
+		return -EINVAL;
+
+	/* read current device state */
+	result = ec_read(MSI_STANDARD_EC_COMMAND_ADDRESS, &rdata);
+	if (result < 0)
+		return -EINVAL;
+
+	if (!!(rdata & mask) != status) {
+		/* reverse device bit */
+		if (rdata & mask)
+			wdata = rdata & ~mask;
+		else
+			wdata = rdata | mask;
+
+		result = ec_write(MSI_STANDARD_EC_COMMAND_ADDRESS, wdata);
+		if (result < 0)
+			return -EINVAL;
+	}
+
+	return count;
+}
+
 static int get_wireless_state(int *wlan, int *bluetooth)
 {
 	u8 wdata = 0, rdata;
@@ -148,6 +209,38 @@ static int get_wireless_state(int *wlan, int *bluetooth)
 	return 0;
 }
 
+static int get_wireless_state_ec_standard(void)
+{
+	u8 rdata;
+	int result;
+
+	result = ec_read(MSI_STANDARD_EC_COMMAND_ADDRESS, &rdata);
+	if (result < 0)
+		return -1;
+
+	wlan_s = !!(rdata & MSI_STANDARD_EC_WLAN_MASK);
+
+	bluetooth_s = !!(rdata & MSI_STANDARD_EC_BLUETOOTH_MASK);
+
+	threeg_s = !!(rdata & MSI_STANDARD_EC_3G_MASK);
+
+	return 0;
+}
+
+static int get_threeg_exists(void)
+{
+	u8 rdata;
+	int result;
+
+	result = ec_read(MSI_STANDARD_EC_DEVICES_EXISTS_ADDRESS, &rdata);
+	if (result < 0)
+		return -1;
+
+	threeg_exists = !!(rdata & MSI_STANDARD_EC_3G_MASK);
+
+	return 0;
+}
+
 /* Backlight device stuff */
 
 static int bl_get_brightness(struct backlight_device *b)
@@ -176,26 +269,71 @@ static ssize_t show_wlan(struct device *dev,
 
 	int ret, enabled;
 
-	ret = get_wireless_state(&enabled, NULL);
+	if (old_ec_model) {
+		ret = get_wireless_state(&enabled, NULL);
+	} else {
+		ret = get_wireless_state_ec_standard();
+		enabled = wlan_s;
+	}
 	if (ret < 0)
 		return ret;
 
 	return sprintf(buf, "%i\n", enabled);
 }
 
+static ssize_t store_wlan(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	return set_device_state(buf, count, MSI_STANDARD_EC_WLAN_MASK);
+}
+
 static ssize_t show_bluetooth(struct device *dev,
 	struct device_attribute *attr, char *buf)
 {
 
 	int ret, enabled;
 
-	ret = get_wireless_state(NULL, &enabled);
+	if (old_ec_model) {
+		ret = get_wireless_state(NULL, &enabled);
+	} else {
+		ret = get_wireless_state_ec_standard();
+		enabled = bluetooth_s;
+	}
 	if (ret < 0)
 		return ret;
 
 	return sprintf(buf, "%i\n", enabled);
 }
 
+static ssize_t store_bluetooth(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	return set_device_state(buf, count, MSI_STANDARD_EC_BLUETOOTH_MASK);
+}
+
+static ssize_t show_threeg(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+
+	int ret;
+
+	/* old msi ec not support 3G */
+	if (old_ec_model)
+		return -1;
+
+	ret = get_wireless_state_ec_standard();
+	if (ret < 0)
+		return ret;
+
+	return sprintf(buf, "%i\n", threeg_s);
+}
+
+static ssize_t store_threeg(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	return set_device_state(buf, count, MSI_STANDARD_EC_3G_MASK);
+}
+
 static ssize_t show_lcd_level(struct device *dev,
 	struct device_attribute *attr, char *buf)
 {
@@ -258,6 +396,7 @@ static DEVICE_ATTR(lcd_level, 0644, show_lcd_level, store_lcd_level);
 static DEVICE_ATTR(auto_brightness, 0644, show_auto_brightness, store_auto_brightness);
 static DEVICE_ATTR(bluetooth, 0444, show_bluetooth, NULL);
 static DEVICE_ATTR(wlan, 0444, show_wlan, NULL);
+static DEVICE_ATTR(threeg, 0444, show_threeg, NULL);
 
 static struct attribute *msipf_attributes[] = {
 	&dev_attr_lcd_level.attr,
@@ -275,7 +414,8 @@ static struct platform_driver msipf_driver = {
 	.driver = {
 		.name = "msi-laptop-pf",
 		.owner = THIS_MODULE,
-	}
+	},
+	.resume = msi_laptop_resume,
 };
 
 static struct platform_device *msipf_device;
@@ -332,6 +472,192 @@ static struct dmi_system_id __initdata msi_dmi_table[] = {
 	{ }
 };
 
+static struct dmi_system_id __initdata msi_load_scm_models_dmi_table[] = {
+	{
+		.ident = "MSI N034",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR,
+				"MICRO-STAR INTERNATIONAL CO., LTD"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MS-N034"),
+			DMI_MATCH(DMI_CHASSIS_VENDOR,
+			"MICRO-STAR INTERNATIONAL CO., LTD")
+		},
+		.callback = dmi_check_cb
+	},
+	{ }
+};
+
+static int rfkill_bluetooth_set(void *data, bool blocked)
+{
+	/* Do something with blocked...*/
+	/*
+	 * blocked == false is on
+	 * blocked == true is off
+	 */
+	if (blocked)
+		set_device_state("0", 0, MSI_STANDARD_EC_BLUETOOTH_MASK);
+	else
+		set_device_state("1", 0, MSI_STANDARD_EC_BLUETOOTH_MASK);
+
+	return 0;
+}
+
+static int rfkill_wlan_set(void *data, bool blocked)
+{
+	if (blocked)
+		set_device_state("0", 0, MSI_STANDARD_EC_WLAN_MASK);
+	else
+		set_device_state("1", 0, MSI_STANDARD_EC_WLAN_MASK);
+
+	return 0;
+}
+
+static int rfkill_threeg_set(void *data, bool blocked)
+{
+	if (blocked)
+		set_device_state("0", 0, MSI_STANDARD_EC_3G_MASK);
+	else
+		set_device_state("1", 0, MSI_STANDARD_EC_3G_MASK);
+
+	return 0;
+}
+
+static struct rfkill_ops rfkill_bluetooth_ops = {
+	.set_block = rfkill_bluetooth_set
+};
+
+static struct rfkill_ops rfkill_wlan_ops = {
+	.set_block = rfkill_wlan_set
+};
+
+static struct rfkill_ops rfkill_threeg_ops = {
+	.set_block = rfkill_threeg_set
+};
+
+static void rfkill_cleanup(void)
+{
+	if (rfk_bluetooth) {
+		rfkill_unregister(rfk_bluetooth);
+		rfkill_destroy(rfk_bluetooth);
+	}
+
+	if (rfk_threeg) {
+		rfkill_unregister(rfk_threeg);
+		rfkill_destroy(rfk_threeg);
+	}
+
+	if (rfk_wlan) {
+		rfkill_unregister(rfk_wlan);
+		rfkill_destroy(rfk_wlan);
+	}
+}
+
+static int rfkill_init(struct platform_device *sdev)
+{
+	/* add rfkill */
+	int retval;
+
+	rfk_bluetooth = rfkill_alloc("msi-bluetooth", &sdev->dev,
+				RFKILL_TYPE_BLUETOOTH,
+				&rfkill_bluetooth_ops, NULL);
+	if (!rfk_bluetooth) {
+		retval = -ENOMEM;
+		goto err_bluetooth;
+	}
+	retval = rfkill_register(rfk_bluetooth);
+	if (retval)
+		goto err_bluetooth;
+
+	rfk_wlan = rfkill_alloc("msi-wlan", &sdev->dev, RFKILL_TYPE_WLAN,
+				&rfkill_wlan_ops, NULL);
+	if (!rfk_wlan) {
+		retval = -ENOMEM;
+		goto err_wlan;
+	}
+	retval = rfkill_register(rfk_wlan);
+	if (retval)
+		goto err_wlan;
+
+	if (threeg_exists) {
+		rfk_threeg = rfkill_alloc("msi-threeg", &sdev->dev,
+				RFKILL_TYPE_WWAN, &rfkill_threeg_ops, NULL);
+		if (!rfk_threeg) {
+			retval = -ENOMEM;
+			goto err_threeg;
+		}
+		retval = rfkill_register(rfk_threeg);
+		if (retval)
+			goto err_threeg;
+	}
+
+	return 0;
+
+err_threeg:
+	rfkill_destroy(rfk_threeg);
+	if (rfk_wlan)
+		rfkill_unregister(rfk_wlan);
+err_wlan:
+	rfkill_destroy(rfk_wlan);
+	if (rfk_bluetooth)
+		rfkill_unregister(rfk_bluetooth);
+err_bluetooth:
+	rfkill_destroy(rfk_bluetooth);
+
+	return retval;
+}
+
+static int msi_laptop_resume(struct platform_device *device)
+{
+	u8 data;
+	int result;
+
+	if (!load_scm_model)
+		return 0;
+
+	/* set load SCM to disable hardware control by fn key */
+	result = ec_read(MSI_STANDARD_EC_SCM_LOAD_ADDRESS, &data);
+	if (result < 0)
+		return result;
+
+	result = ec_write(MSI_STANDARD_EC_SCM_LOAD_ADDRESS,
+		data | MSI_STANDARD_EC_SCM_LOAD_MASK);
+	if (result < 0)
+		return result;
+
+	return 0;
+}
+
+static int load_scm_model_init(struct platform_device *sdev)
+{
+	u8 data;
+	int result;
+
+	/* allow userland write sysfs file  */
+	dev_attr_bluetooth.store = store_bluetooth;
+	dev_attr_wlan.store = store_wlan;
+	dev_attr_threeg.store = store_threeg;
+	dev_attr_bluetooth.attr.mode |= S_IWUSR;
+	dev_attr_wlan.attr.mode |= S_IWUSR;
+	dev_attr_threeg.attr.mode |= S_IWUSR;
+
+	/* disable hardware control by fn key */
+	result = ec_read(MSI_STANDARD_EC_SCM_LOAD_ADDRESS, &data);
+	if (result < 0)
+		return result;
+
+	result = ec_write(MSI_STANDARD_EC_SCM_LOAD_ADDRESS,
+		data | MSI_STANDARD_EC_SCM_LOAD_MASK);
+	if (result < 0)
+		return result;
+
+	/* initial rfkill */
+	result = rfkill_init(sdev);
+	if (result < 0)
+		return result;
+
+	return 0;
+}
+
 static int __init msi_init(void)
 {
 	int ret;
@@ -339,8 +665,14 @@ static int __init msi_init(void)
 	if (acpi_disabled)
 		return -ENODEV;
 
-	if (!force && !dmi_check_system(msi_dmi_table))
-		return -ENODEV;
+	if (force || dmi_check_system(msi_dmi_table))
+		old_ec_model = 1;
+
+	if (!old_ec_model)
+		get_threeg_exists();
+
+	if (!old_ec_model && dmi_check_system(msi_load_scm_models_dmi_table))
+		load_scm_model = 1;
 
 	if (auto_brightness < 0 || auto_brightness > 2)
 		return -EINVAL;
@@ -351,11 +683,14 @@ static int __init msi_init(void)
 		printk(KERN_INFO "MSI: Brightness ignored, must be controlled "
 		       "by ACPI video driver\n");
 	} else {
+		struct backlight_properties props;
+		memset(&props, 0, sizeof(struct backlight_properties));
+		props.max_brightness = MSI_LCD_LEVEL_MAX - 1;
 		msibl_device = backlight_device_register("msi-laptop-bl", NULL,
-							 NULL, &msibl_ops);
+							 NULL, &msibl_ops,
+							 &props);
 		if (IS_ERR(msibl_device))
 			return PTR_ERR(msibl_device);
-		msibl_device->props.max_brightness = MSI_LCD_LEVEL_MAX-1;
 	}
 
 	ret = platform_driver_register(&msipf_driver);
@@ -374,10 +709,23 @@ static int __init msi_init(void)
 	if (ret)
 		goto fail_platform_device1;
 
+	if (load_scm_model && (load_scm_model_init(msipf_device) < 0)) {
+		ret = -EINVAL;
+		goto fail_platform_device1;
+	}
+
 	ret = sysfs_create_group(&msipf_device->dev.kobj, &msipf_attribute_group);
 	if (ret)
 		goto fail_platform_device2;
 
+	if (!old_ec_model) {
+		if (threeg_exists)
+			ret = device_create_file(&msipf_device->dev,
+						&dev_attr_threeg);
+		if (ret)
+			goto fail_platform_device2;
+	}
+
 	/* Disable automatic brightness control by default because
 	 * this module was probably loaded to do brightness control in
 	 * software. */
@@ -412,10 +760,14 @@ static void __exit msi_cleanup(void)
 {
 
 	sysfs_remove_group(&msipf_device->dev.kobj, &msipf_attribute_group);
+	if (!old_ec_model && threeg_exists)
+		device_remove_file(&msipf_device->dev, &dev_attr_threeg);
 	platform_device_unregister(msipf_device);
 	platform_driver_unregister(&msipf_driver);
 	backlight_device_unregister(msibl_device);
 
+	rfkill_cleanup();
+
 	/* Enable automatic brightness control again */
 	if (auto_brightness != 2)
 		set_auto_brightness(1);
@@ -435,3 +787,4 @@ MODULE_ALIAS("dmi:*:svnMICRO-STARINT'LCO.,LTD:pnMS-1013:pvr0131*:cvnMICRO-STARIN
 MODULE_ALIAS("dmi:*:svnMicro-StarInternational:pnMS-1058:pvr0581:rvnMSI:rnMS-1058:*:ct10:*");
 MODULE_ALIAS("dmi:*:svnMicro-StarInternational:pnMS-1412:*:rvnMSI:rnMS-1412:*:cvnMICRO-STARINT'LCO.,LTD:ct10:*");
 MODULE_ALIAS("dmi:*:svnNOTEBOOK:pnSAM2000:pvr0131*:cvnMICRO-STARINT'LCO.,LTD:ct10:*");
+MODULE_ALIAS("dmi:*:svnMICRO-STARINTERNATIONAL*:pnMS-N034:*");
diff --git a/drivers/platform/x86/msi-wmi.c b/drivers/platform/x86/msi-wmi.c
index f5f70d4c6913..367caaae2f3c 100644
--- a/drivers/platform/x86/msi-wmi.c
+++ b/drivers/platform/x86/msi-wmi.c
@@ -138,7 +138,7 @@ static int bl_set_status(struct backlight_device *bd)
 	return msi_wmi_set_block(0, backlight_map[bright]);
 }
 
-static struct backlight_ops msi_backlight_ops = {
+static const struct backlight_ops msi_backlight_ops = {
 	.get_brightness	= bl_get,
 	.update_status	= bl_set_status,
 };
@@ -249,12 +249,17 @@ static int __init msi_wmi_init(void)
 		goto err_uninstall_notifier;
 
 	if (!acpi_video_backlight_support()) {
-		backlight = backlight_device_register(DRV_NAME,
-				NULL, NULL, &msi_backlight_ops);
-		if (IS_ERR(backlight))
+		struct backlight_properties props;
+		memset(&props, 0, sizeof(struct backlight_properties));
+		props.max_brightness = ARRAY_SIZE(backlight_map) - 1;
+		backlight = backlight_device_register(DRV_NAME, NULL, NULL,
+						      &msi_backlight_ops,
+						      &props);
+		if (IS_ERR(backlight)) {
+			err = PTR_ERR(backlight);
 			goto err_free_input;
+		}
 
-		backlight->props.max_brightness = ARRAY_SIZE(backlight_map) - 1;
 		err = bl_get(NULL);
 		if (err < 0)
 			goto err_free_backlight;
diff --git a/drivers/platform/x86/panasonic-laptop.c b/drivers/platform/x86/panasonic-laptop.c
index fe7cf0188acc..726f02affcb6 100644
--- a/drivers/platform/x86/panasonic-laptop.c
+++ b/drivers/platform/x86/panasonic-laptop.c
@@ -200,7 +200,7 @@ static struct acpi_driver acpi_pcc_driver = {
 };
 
 #define KEYMAP_SIZE		11
-static const int initial_keymap[KEYMAP_SIZE] = {
+static const unsigned int initial_keymap[KEYMAP_SIZE] = {
 	/*  0 */ KEY_RESERVED,
 	/*  1 */ KEY_BRIGHTNESSDOWN,
 	/*  2 */ KEY_BRIGHTNESSUP,
@@ -222,7 +222,7 @@ struct pcc_acpi {
 	struct acpi_device	*device;
 	struct input_dev	*input_dev;
 	struct backlight_device	*backlight;
-	int			keymap[KEYMAP_SIZE];
+	unsigned int		keymap[KEYMAP_SIZE];
 };
 
 struct pcc_keyinput {
@@ -352,7 +352,7 @@ static int bl_set_status(struct backlight_device *bd)
 	return acpi_pcc_write_sset(pcc, SINF_DC_CUR_BRIGHT, bright);
 }
 
-static struct backlight_ops pcc_backlight_ops = {
+static const struct backlight_ops pcc_backlight_ops = {
 	.get_brightness	= bl_get,
 	.update_status	= bl_set_status,
 };
@@ -445,7 +445,8 @@ static struct attribute_group pcc_attr_group = {
 
 /* hotkey input device driver */
 
-static int pcc_getkeycode(struct input_dev *dev, int scancode, int *keycode)
+static int pcc_getkeycode(struct input_dev *dev,
+			  unsigned int scancode, unsigned int *keycode)
 {
 	struct pcc_acpi *pcc = input_get_drvdata(dev);
 
@@ -457,7 +458,7 @@ static int pcc_getkeycode(struct input_dev *dev, int scancode, int *keycode)
 	return 0;
 }
 
-static int keymap_get_by_keycode(struct pcc_acpi *pcc, int keycode)
+static int keymap_get_by_keycode(struct pcc_acpi *pcc, unsigned int keycode)
 {
 	int i;
 
@@ -469,7 +470,8 @@ static int keymap_get_by_keycode(struct pcc_acpi *pcc, int keycode)
 	return 0;
 }
 
-static int pcc_setkeycode(struct input_dev *dev, int scancode, int keycode)
+static int pcc_setkeycode(struct input_dev *dev,
+			  unsigned int scancode, unsigned int keycode)
 {
 	struct pcc_acpi *pcc = input_get_drvdata(dev);
 	int oldkeycode;
@@ -477,9 +479,6 @@ static int pcc_setkeycode(struct input_dev *dev, int scancode, int keycode)
 	if (scancode >= ARRAY_SIZE(pcc->keymap))
 		return -EINVAL;
 
-	if (keycode < 0 || keycode > KEY_MAX)
-		return -EINVAL;
-
 	oldkeycode = pcc->keymap[scancode];
 	pcc->keymap[scancode] = keycode;
 
@@ -601,6 +600,7 @@ static int acpi_pcc_hotkey_resume(struct acpi_device *device)
 
 static int acpi_pcc_hotkey_add(struct acpi_device *device)
 {
+	struct backlight_properties props;
 	struct pcc_acpi *pcc;
 	int num_sifr, result;
 
@@ -638,24 +638,25 @@ static int acpi_pcc_hotkey_add(struct acpi_device *device)
 	if (result) {
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
 				  "Error installing keyinput handler\n"));
-		goto out_sinf;
+		goto out_hotkey;
 	}
 
-	/* initialize backlight */
-	pcc->backlight = backlight_device_register("panasonic", NULL, pcc,
-						   &pcc_backlight_ops);
-	if (IS_ERR(pcc->backlight))
-		goto out_input;
-
 	if (!acpi_pcc_retrieve_biosdata(pcc, pcc->sinf)) {
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
 				 "Couldn't retrieve BIOS data\n"));
-		goto out_backlight;
+		goto out_input;
+	}
+	/* initialize backlight */
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.max_brightness = pcc->sinf[SINF_AC_MAX_BRIGHT];
+	pcc->backlight = backlight_device_register("panasonic", NULL, pcc,
+						   &pcc_backlight_ops, &props);
+	if (IS_ERR(pcc->backlight)) {
+		result = PTR_ERR(pcc->backlight);
+		goto out_sinf;
 	}
 
 	/* read the initial brightness setting from the hardware */
-	pcc->backlight->props.max_brightness =
-					pcc->sinf[SINF_AC_MAX_BRIGHT];
 	pcc->backlight->props.brightness = pcc->sinf[SINF_AC_CUR_BRIGHT];
 
 	/* read the initial sticky key mode from the hardware */
@@ -670,12 +671,12 @@ static int acpi_pcc_hotkey_add(struct acpi_device *device)
 
 out_backlight:
 	backlight_device_unregister(pcc->backlight);
+out_sinf:
+	kfree(pcc->sinf);
 out_input:
 	input_unregister_device(pcc->input_dev);
 	/* no need to input_free_device() since core input API refcount and
 	 * free()s the device */
-out_sinf:
-	kfree(pcc->sinf);
 out_hotkey:
 	kfree(pcc);
 
diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c
index 3f71a605a492..6553b91caaa4 100644
--- a/drivers/platform/x86/sony-laptop.c
+++ b/drivers/platform/x86/sony-laptop.c
@@ -145,7 +145,7 @@ struct sony_laptop_input_s {
 	struct input_dev	*key_dev;
 	struct kfifo		fifo;
 	spinlock_t		fifo_lock;
-	struct workqueue_struct	*wq;
+	struct timer_list	release_key_timer;
 };
 
 static struct sony_laptop_input_s sony_laptop_input = {
@@ -299,20 +299,26 @@ static int sony_laptop_input_keycode_map[] = {
 };
 
 /* release buttons after a short delay if pressed */
-static void do_sony_laptop_release_key(struct work_struct *work)
+static void do_sony_laptop_release_key(unsigned long unused)
 {
 	struct sony_laptop_keypress kp;
+	unsigned long flags;
+
+	spin_lock_irqsave(&sony_laptop_input.fifo_lock, flags);
 
-	while (kfifo_out_locked(&sony_laptop_input.fifo, (unsigned char *)&kp,
-			sizeof(kp), &sony_laptop_input.fifo_lock)
-			== sizeof(kp)) {
-		msleep(10);
+	if (kfifo_out(&sony_laptop_input.fifo,
+		      (unsigned char *)&kp, sizeof(kp)) == sizeof(kp)) {
 		input_report_key(kp.dev, kp.key, 0);
 		input_sync(kp.dev);
 	}
+
+	/* If there is something in the fifo schedule next release. */
+	if (kfifo_len(&sony_laptop_input.fifo) != 0)
+		mod_timer(&sony_laptop_input.release_key_timer,
+			  jiffies + msecs_to_jiffies(10));
+
+	spin_unlock_irqrestore(&sony_laptop_input.fifo_lock, flags);
 }
-static DECLARE_WORK(sony_laptop_release_key_work,
-		do_sony_laptop_release_key);
 
 /* forward event to the input subsystem */
 static void sony_laptop_report_input_event(u8 event)
@@ -366,13 +372,13 @@ static void sony_laptop_report_input_event(u8 event)
 		/* we emit the scancode so we can always remap the key */
 		input_event(kp.dev, EV_MSC, MSC_SCAN, event);
 		input_sync(kp.dev);
-		kfifo_in_locked(&sony_laptop_input.fifo,
-			  (unsigned char *)&kp, sizeof(kp),
-			  &sony_laptop_input.fifo_lock);
 
-		if (!work_pending(&sony_laptop_release_key_work))
-			queue_work(sony_laptop_input.wq,
-					&sony_laptop_release_key_work);
+		/* schedule key release */
+		kfifo_in_locked(&sony_laptop_input.fifo,
+				(unsigned char *)&kp, sizeof(kp),
+				&sony_laptop_input.fifo_lock);
+		mod_timer(&sony_laptop_input.release_key_timer,
+			  jiffies + msecs_to_jiffies(10));
 	} else
 		dprintk("unknown input event %.2x\n", event);
 }
@@ -390,27 +396,21 @@ static int sony_laptop_setup_input(struct acpi_device *acpi_device)
 
 	/* kfifo */
 	spin_lock_init(&sony_laptop_input.fifo_lock);
-	error =
-	 kfifo_alloc(&sony_laptop_input.fifo, SONY_LAPTOP_BUF_SIZE, GFP_KERNEL);
+	error = kfifo_alloc(&sony_laptop_input.fifo,
+			    SONY_LAPTOP_BUF_SIZE, GFP_KERNEL);
 	if (error) {
 		printk(KERN_ERR DRV_PFX "kfifo_alloc failed\n");
 		goto err_dec_users;
 	}
 
-	/* init workqueue */
-	sony_laptop_input.wq = create_singlethread_workqueue("sony-laptop");
-	if (!sony_laptop_input.wq) {
-		printk(KERN_ERR DRV_PFX
-				"Unable to create workqueue.\n");
-		error = -ENXIO;
-		goto err_free_kfifo;
-	}
+	setup_timer(&sony_laptop_input.release_key_timer,
+		    do_sony_laptop_release_key, 0);
 
 	/* input keys */
 	key_dev = input_allocate_device();
 	if (!key_dev) {
 		error = -ENOMEM;
-		goto err_destroy_wq;
+		goto err_free_kfifo;
 	}
 
 	key_dev->name = "Sony Vaio Keys";
@@ -419,18 +419,15 @@ static int sony_laptop_setup_input(struct acpi_device *acpi_device)
 	key_dev->dev.parent = &acpi_device->dev;
 
 	/* Initialize the Input Drivers: special keys */
-	set_bit(EV_KEY, key_dev->evbit);
-	set_bit(EV_MSC, key_dev->evbit);
-	set_bit(MSC_SCAN, key_dev->mscbit);
+	input_set_capability(key_dev, EV_MSC, MSC_SCAN);
+
+	__set_bit(EV_KEY, key_dev->evbit);
 	key_dev->keycodesize = sizeof(sony_laptop_input_keycode_map[0]);
 	key_dev->keycodemax = ARRAY_SIZE(sony_laptop_input_keycode_map);
 	key_dev->keycode = &sony_laptop_input_keycode_map;
-	for (i = 0; i < ARRAY_SIZE(sony_laptop_input_keycode_map); i++) {
-		if (sony_laptop_input_keycode_map[i] != KEY_RESERVED) {
-			set_bit(sony_laptop_input_keycode_map[i],
-				key_dev->keybit);
-		}
-	}
+	for (i = 0; i < ARRAY_SIZE(sony_laptop_input_keycode_map); i++)
+		__set_bit(sony_laptop_input_keycode_map[i], key_dev->keybit);
+	__clear_bit(KEY_RESERVED, key_dev->keybit);
 
 	error = input_register_device(key_dev);
 	if (error)
@@ -450,9 +447,8 @@ static int sony_laptop_setup_input(struct acpi_device *acpi_device)
 	jog_dev->id.vendor = PCI_VENDOR_ID_SONY;
 	key_dev->dev.parent = &acpi_device->dev;
 
-	jog_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
-	jog_dev->keybit[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_MIDDLE);
-	jog_dev->relbit[0] = BIT_MASK(REL_WHEEL);
+	input_set_capability(jog_dev, EV_KEY, BTN_MIDDLE);
+	input_set_capability(jog_dev, EV_REL, REL_WHEEL);
 
 	error = input_register_device(jog_dev);
 	if (error)
@@ -473,9 +469,6 @@ err_unregister_keydev:
 err_free_keydev:
 	input_free_device(key_dev);
 
-err_destroy_wq:
-	destroy_workqueue(sony_laptop_input.wq);
-
 err_free_kfifo:
 	kfifo_free(&sony_laptop_input.fifo);
 
@@ -486,12 +479,23 @@ err_dec_users:
 
 static void sony_laptop_remove_input(void)
 {
-	/* cleanup only after the last user has gone */
+	struct sony_laptop_keypress kp = { NULL };
+
+	/* Cleanup only after the last user has gone */
 	if (!atomic_dec_and_test(&sony_laptop_input.users))
 		return;
 
-	/* flush workqueue first */
-	flush_workqueue(sony_laptop_input.wq);
+	del_timer_sync(&sony_laptop_input.release_key_timer);
+
+	/*
+	 * Generate key-up events for remaining keys. Note that we don't
+	 * need locking since nobody is adding new events to the kfifo.
+	 */
+	while (kfifo_out(&sony_laptop_input.fifo,
+			 (unsigned char *)&kp, sizeof(kp)) == sizeof(kp)) {
+		input_report_key(kp.dev, kp.key, 0);
+		input_sync(kp.dev);
+	}
 
 	/* destroy input devs */
 	input_unregister_device(sony_laptop_input.key_dev);
@@ -502,7 +506,6 @@ static void sony_laptop_remove_input(void)
 		sony_laptop_input.jog_dev = NULL;
 	}
 
-	destroy_workqueue(sony_laptop_input.wq);
 	kfifo_free(&sony_laptop_input.fifo);
 }
 
@@ -1288,9 +1291,13 @@ static int sony_nc_add(struct acpi_device *device)
 		       "controlled by ACPI video driver\n");
 	} else if (ACPI_SUCCESS(acpi_get_handle(sony_nc_acpi_handle, "GBRT",
 						&handle))) {
+							struct backlight_properties props;
+		memset(&props, 0, sizeof(struct backlight_properties));
+		props.max_brightness = SONY_MAX_BRIGHTNESS - 1;
 		sony_backlight_device = backlight_device_register("sony", NULL,
 								  NULL,
-								  &sony_backlight_ops);
+								  &sony_backlight_ops,
+								  &props);
 
 		if (IS_ERR(sony_backlight_device)) {
 			printk(KERN_WARNING DRV_PFX "unable to register backlight device\n");
@@ -1299,8 +1306,6 @@ static int sony_nc_add(struct acpi_device *device)
 			sony_backlight_device->props.brightness =
 			    sony_backlight_get_brightness
 			    (sony_backlight_device);
-			sony_backlight_device->props.max_brightness =
-			    SONY_MAX_BRIGHTNESS - 1;
 		}
 
 	}
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index e7b0c3bcef89..770b85327f84 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -1668,7 +1668,7 @@ static void tpacpi_remove_driver_attributes(struct device_driver *drv)
  * Table of recommended minimum BIOS versions
  *
  * Reasons for listing:
- *    1. Stable BIOS, listed because the unknown ammount of
+ *    1. Stable BIOS, listed because the unknown amount of
  *       bugs and bad ACPI behaviour on older versions
  *
  *    2. BIOS or EC fw with known bugs that trigger on Linux
@@ -6170,6 +6170,7 @@ static const struct tpacpi_quirk brightness_quirk_table[] __initconst = {
 
 static int __init brightness_init(struct ibm_init_struct *iibm)
 {
+	struct backlight_properties props;
 	int b;
 	unsigned long quirks;
 
@@ -6259,9 +6260,12 @@ static int __init brightness_init(struct ibm_init_struct *iibm)
 		printk(TPACPI_INFO
 		       "detected a 16-level brightness capable ThinkPad\n");
 
-	ibm_backlight_device = backlight_device_register(
-					TPACPI_BACKLIGHT_DEV_NAME, NULL, NULL,
-					&ibm_backlight_data);
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.max_brightness = (tp_features.bright_16levels) ? 15 : 7;
+	ibm_backlight_device = backlight_device_register(TPACPI_BACKLIGHT_DEV_NAME,
+							 NULL, NULL,
+							 &ibm_backlight_data,
+							 &props);
 	if (IS_ERR(ibm_backlight_device)) {
 		int rc = PTR_ERR(ibm_backlight_device);
 		ibm_backlight_device = NULL;
@@ -6280,8 +6284,6 @@ static int __init brightness_init(struct ibm_init_struct *iibm)
 			"or not on your ThinkPad\n", TPACPI_MAIL);
 	}
 
-	ibm_backlight_device->props.max_brightness =
-				(tp_features.bright_16levels)? 15 : 7;
 	ibm_backlight_device->props.brightness = b & TP_EC_BACKLIGHT_LVLMSK;
 	backlight_update_status(ibm_backlight_device);
 
@@ -7108,7 +7110,7 @@ static struct ibm_struct volume_driver_data = {
  *
  * 	Fan speed changes of any sort (including those caused by the
  * 	disengaged mode) are usually done slowly by the firmware as the
- * 	maximum ammount of fan duty cycle change per second seems to be
+ * 	maximum amount of fan duty cycle change per second seems to be
  * 	limited.
  *
  * 	Reading is not available if GFAN exists.
diff --git a/drivers/platform/x86/topstar-laptop.c b/drivers/platform/x86/topstar-laptop.c
index 02f3d4e9e666..4d6516fded7e 100644
--- a/drivers/platform/x86/topstar-laptop.c
+++ b/drivers/platform/x86/topstar-laptop.c
@@ -46,7 +46,7 @@ static struct tps_key_entry topstar_keymap[] = {
 	{ }
 };
 
-static struct tps_key_entry *tps_get_key_by_scancode(int code)
+static struct tps_key_entry *tps_get_key_by_scancode(unsigned int code)
 {
 	struct tps_key_entry *key;
 
@@ -57,7 +57,7 @@ static struct tps_key_entry *tps_get_key_by_scancode(int code)
 	return NULL;
 }
 
-static struct tps_key_entry *tps_get_key_by_keycode(int code)
+static struct tps_key_entry *tps_get_key_by_keycode(unsigned int code)
 {
 	struct tps_key_entry *key;
 
@@ -126,7 +126,8 @@ static int acpi_topstar_fncx_switch(struct acpi_device *device, bool state)
 	return 0;
 }
 
-static int topstar_getkeycode(struct input_dev *dev, int scancode, int *keycode)
+static int topstar_getkeycode(struct input_dev *dev,
+				unsigned int scancode, unsigned int *keycode)
 {
 	struct tps_key_entry *key = tps_get_key_by_scancode(scancode);
 
@@ -137,14 +138,12 @@ static int topstar_getkeycode(struct input_dev *dev, int scancode, int *keycode)
 	return 0;
 }
 
-static int topstar_setkeycode(struct input_dev *dev, int scancode, int keycode)
+static int topstar_setkeycode(struct input_dev *dev,
+				unsigned int scancode, unsigned int keycode)
 {
 	struct tps_key_entry *key;
 	int old_keycode;
 
-	if (keycode < 0 || keycode > KEY_MAX)
-		return -EINVAL;
-
 	key = tps_get_key_by_scancode(scancode);
 
 	if (!key)
diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
index 405b969734d6..def4841183be 100644
--- a/drivers/platform/x86/toshiba_acpi.c
+++ b/drivers/platform/x86/toshiba_acpi.c
@@ -745,7 +745,7 @@ static struct backlight_ops toshiba_backlight_data = {
         .update_status  = set_lcd_status,
 };
 
-static struct key_entry *toshiba_acpi_get_entry_by_scancode(int code)
+static struct key_entry *toshiba_acpi_get_entry_by_scancode(unsigned int code)
 {
 	struct key_entry *key;
 
@@ -756,7 +756,7 @@ static struct key_entry *toshiba_acpi_get_entry_by_scancode(int code)
 	return NULL;
 }
 
-static struct key_entry *toshiba_acpi_get_entry_by_keycode(int code)
+static struct key_entry *toshiba_acpi_get_entry_by_keycode(unsigned int code)
 {
 	struct key_entry *key;
 
@@ -767,8 +767,8 @@ static struct key_entry *toshiba_acpi_get_entry_by_keycode(int code)
 	return NULL;
 }
 
-static int toshiba_acpi_getkeycode(struct input_dev *dev, int scancode,
-				   int *keycode)
+static int toshiba_acpi_getkeycode(struct input_dev *dev,
+				   unsigned int scancode, unsigned int *keycode)
 {
 	struct key_entry *key = toshiba_acpi_get_entry_by_scancode(scancode);
 
@@ -780,14 +780,11 @@ static int toshiba_acpi_getkeycode(struct input_dev *dev, int scancode,
 	return -EINVAL;
 }
 
-static int toshiba_acpi_setkeycode(struct input_dev *dev, int scancode,
-				   int keycode)
+static int toshiba_acpi_setkeycode(struct input_dev *dev,
+				   unsigned int scancode, unsigned int keycode)
 {
 	struct key_entry *key;
-	int old_keycode;
-
-	if (keycode < 0 || keycode > KEY_MAX)
-		return -EINVAL;
+	unsigned int old_keycode;
 
 	key = toshiba_acpi_get_entry_by_scancode(scancode);
 	if (key && key->type == KE_KEY) {
@@ -927,6 +924,7 @@ static int __init toshiba_acpi_init(void)
 	u32 hci_result;
 	bool bt_present;
 	int ret = 0;
+	struct backlight_properties props;
 
 	if (acpi_disabled)
 		return -ENODEV;
@@ -977,10 +975,12 @@ static int __init toshiba_acpi_init(void)
 		}
 	}
 
+	props.max_brightness = HCI_LCD_BRIGHTNESS_LEVELS - 1;
 	toshiba_backlight_device = backlight_device_register("toshiba",
-						&toshiba_acpi.p_dev->dev,
-						NULL,
-						&toshiba_backlight_data);
+							     &toshiba_acpi.p_dev->dev,
+							     NULL,
+							     &toshiba_backlight_data,
+							     &props);
         if (IS_ERR(toshiba_backlight_device)) {
 		ret = PTR_ERR(toshiba_backlight_device);
 
@@ -989,7 +989,6 @@ static int __init toshiba_acpi_init(void)
 		toshiba_acpi_exit();
 		return ret;
 	}
-        toshiba_backlight_device->props.max_brightness = HCI_LCD_BRIGHTNESS_LEVELS - 1;
 
 	/* Register rfkill switch for Bluetooth */
 	if (hci_get_bt_present(&bt_present) == HCI_SUCCESS && bt_present) {
diff --git a/drivers/pnp/base.h b/drivers/pnp/base.h
index 0b8d14050efa..0bab84ebb15d 100644
--- a/drivers/pnp/base.h
+++ b/drivers/pnp/base.h
@@ -166,6 +166,9 @@ struct pnp_resource *pnp_add_io_resource(struct pnp_dev *dev,
 struct pnp_resource *pnp_add_mem_resource(struct pnp_dev *dev,
 					  resource_size_t start,
 					  resource_size_t end, int flags);
+struct pnp_resource *pnp_add_bus_resource(struct pnp_dev *dev,
+					  resource_size_t start,
+					  resource_size_t end);
 
 extern int pnp_debug;
 
diff --git a/drivers/pnp/interface.c b/drivers/pnp/interface.c
index 68b0c04987e4..cfaf5b73540b 100644
--- a/drivers/pnp/interface.c
+++ b/drivers/pnp/interface.c
@@ -278,9 +278,12 @@ static ssize_t pnp_show_current_resources(struct device *dmdev,
 		switch (pnp_resource_type(res)) {
 		case IORESOURCE_IO:
 		case IORESOURCE_MEM:
-			pnp_printf(buffer, " %#llx-%#llx\n",
+		case IORESOURCE_BUS:
+			pnp_printf(buffer, " %#llx-%#llx%s\n",
 				   (unsigned long long) res->start,
-				   (unsigned long long) res->end);
+				   (unsigned long long) res->end,
+				   res->flags & IORESOURCE_WINDOW ?
+					" window" : "");
 			break;
 		case IORESOURCE_IRQ:
 		case IORESOURCE_DMA:
diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c
index 5702b2c8691f..54514aa35b09 100644
--- a/drivers/pnp/pnpacpi/rsparser.c
+++ b/drivers/pnp/pnpacpi/rsparser.c
@@ -177,7 +177,8 @@ static int dma_flags(struct pnp_dev *dev, int type, int bus_master,
 }
 
 static void pnpacpi_parse_allocated_ioresource(struct pnp_dev *dev, u64 start,
-					       u64 len, int io_decode)
+					       u64 len, int io_decode,
+					       int window)
 {
 	int flags = 0;
 	u64 end = start + len - 1;
@@ -186,6 +187,8 @@ static void pnpacpi_parse_allocated_ioresource(struct pnp_dev *dev, u64 start,
 		flags |= IORESOURCE_IO_16BIT_ADDR;
 	if (len == 0 || end >= 0x10003)
 		flags |= IORESOURCE_DISABLED;
+	if (window)
+		flags |= IORESOURCE_WINDOW;
 
 	pnp_add_io_resource(dev, start, end, flags);
 }
@@ -247,7 +250,7 @@ static void pnpacpi_parse_allocated_vendor(struct pnp_dev *dev,
 
 static void pnpacpi_parse_allocated_memresource(struct pnp_dev *dev,
 						u64 start, u64 len,
-						int write_protect)
+						int write_protect, int window)
 {
 	int flags = 0;
 	u64 end = start + len - 1;
@@ -256,15 +259,26 @@ static void pnpacpi_parse_allocated_memresource(struct pnp_dev *dev,
 		flags |= IORESOURCE_DISABLED;
 	if (write_protect == ACPI_READ_WRITE_MEMORY)
 		flags |= IORESOURCE_MEM_WRITEABLE;
+	if (window)
+		flags |= IORESOURCE_WINDOW;
 
 	pnp_add_mem_resource(dev, start, end, flags);
 }
 
+static void pnpacpi_parse_allocated_busresource(struct pnp_dev *dev,
+						u64 start, u64 len)
+{
+	u64 end = start + len - 1;
+
+	pnp_add_bus_resource(dev, start, end);
+}
+
 static void pnpacpi_parse_allocated_address_space(struct pnp_dev *dev,
 						  struct acpi_resource *res)
 {
 	struct acpi_resource_address64 addr, *p = &addr;
 	acpi_status status;
+	int window;
 
 	status = acpi_resource_to_address64(res, p);
 	if (!ACPI_SUCCESS(status)) {
@@ -273,37 +287,42 @@ static void pnpacpi_parse_allocated_address_space(struct pnp_dev *dev,
 		return;
 	}
 
-	if (p->producer_consumer == ACPI_PRODUCER)
-		return;
+	window = (p->producer_consumer == ACPI_PRODUCER) ? 1 : 0;
 
 	if (p->resource_type == ACPI_MEMORY_RANGE)
 		pnpacpi_parse_allocated_memresource(dev,
 			p->minimum, p->address_length,
-			p->info.mem.write_protect);
+			p->info.mem.write_protect, window);
 	else if (p->resource_type == ACPI_IO_RANGE)
 		pnpacpi_parse_allocated_ioresource(dev,
 			p->minimum, p->address_length,
 			p->granularity == 0xfff ? ACPI_DECODE_10 :
-				ACPI_DECODE_16);
+				ACPI_DECODE_16, window);
+	else if (p->resource_type == ACPI_BUS_NUMBER_RANGE)
+		pnpacpi_parse_allocated_busresource(dev, p->minimum,
+						    p->address_length);
 }
 
 static void pnpacpi_parse_allocated_ext_address_space(struct pnp_dev *dev,
 						      struct acpi_resource *res)
 {
 	struct acpi_resource_extended_address64 *p = &res->data.ext_address64;
+	int window;
 
-	if (p->producer_consumer == ACPI_PRODUCER)
-		return;
+	window = (p->producer_consumer == ACPI_PRODUCER) ? 1 : 0;
 
 	if (p->resource_type == ACPI_MEMORY_RANGE)
 		pnpacpi_parse_allocated_memresource(dev,
 			p->minimum, p->address_length,
-			p->info.mem.write_protect);
+			p->info.mem.write_protect, window);
 	else if (p->resource_type == ACPI_IO_RANGE)
 		pnpacpi_parse_allocated_ioresource(dev,
 			p->minimum, p->address_length,
 			p->granularity == 0xfff ? ACPI_DECODE_10 :
-				ACPI_DECODE_16);
+				ACPI_DECODE_16, window);
+	else if (p->resource_type == ACPI_BUS_NUMBER_RANGE)
+		pnpacpi_parse_allocated_busresource(dev, p->minimum,
+						    p->address_length);
 }
 
 static acpi_status pnpacpi_allocated_resource(struct acpi_resource *res,
@@ -368,7 +387,7 @@ static acpi_status pnpacpi_allocated_resource(struct acpi_resource *res,
 		pnpacpi_parse_allocated_ioresource(dev,
 			io->minimum,
 			io->address_length,
-			io->io_decode);
+			io->io_decode, 0);
 		break;
 
 	case ACPI_RESOURCE_TYPE_START_DEPENDENT:
@@ -380,7 +399,7 @@ static acpi_status pnpacpi_allocated_resource(struct acpi_resource *res,
 		pnpacpi_parse_allocated_ioresource(dev,
 			fixed_io->address,
 			fixed_io->address_length,
-			ACPI_DECODE_10);
+			ACPI_DECODE_10, 0);
 		break;
 
 	case ACPI_RESOURCE_TYPE_VENDOR:
@@ -396,21 +415,21 @@ static acpi_status pnpacpi_allocated_resource(struct acpi_resource *res,
 		pnpacpi_parse_allocated_memresource(dev,
 			memory24->minimum,
 			memory24->address_length,
-			memory24->write_protect);
+			memory24->write_protect, 0);
 		break;
 	case ACPI_RESOURCE_TYPE_MEMORY32:
 		memory32 = &res->data.memory32;
 		pnpacpi_parse_allocated_memresource(dev,
 			memory32->minimum,
 			memory32->address_length,
-			memory32->write_protect);
+			memory32->write_protect, 0);
 		break;
 	case ACPI_RESOURCE_TYPE_FIXED_MEMORY32:
 		fixed_memory32 = &res->data.fixed_memory32;
 		pnpacpi_parse_allocated_memresource(dev,
 			fixed_memory32->address,
 			fixed_memory32->address_length,
-			fixed_memory32->write_protect);
+			fixed_memory32->write_protect, 0);
 		break;
 	case ACPI_RESOURCE_TYPE_ADDRESS16:
 	case ACPI_RESOURCE_TYPE_ADDRESS32:
diff --git a/drivers/pnp/resource.c b/drivers/pnp/resource.c
index 64d0596bafb5..5b277dbaacde 100644
--- a/drivers/pnp/resource.c
+++ b/drivers/pnp/resource.c
@@ -470,7 +470,8 @@ int pnp_check_dma(struct pnp_dev *dev, struct resource *res)
 unsigned long pnp_resource_type(struct resource *res)
 {
 	return res->flags & (IORESOURCE_IO  | IORESOURCE_MEM |
-			     IORESOURCE_IRQ | IORESOURCE_DMA);
+			     IORESOURCE_IRQ | IORESOURCE_DMA |
+			     IORESOURCE_BUS);
 }
 
 struct resource *pnp_get_resource(struct pnp_dev *dev,
@@ -590,6 +591,30 @@ struct pnp_resource *pnp_add_mem_resource(struct pnp_dev *dev,
 	return pnp_res;
 }
 
+struct pnp_resource *pnp_add_bus_resource(struct pnp_dev *dev,
+					  resource_size_t start,
+					  resource_size_t end)
+{
+	struct pnp_resource *pnp_res;
+	struct resource *res;
+
+	pnp_res = pnp_new_resource(dev);
+	if (!pnp_res) {
+		dev_err(&dev->dev, "can't add resource for BUS %#llx-%#llx\n",
+			(unsigned long long) start,
+			(unsigned long long) end);
+		return NULL;
+	}
+
+	res = &pnp_res->res;
+	res->flags = IORESOURCE_BUS;
+	res->start = start;
+	res->end = end;
+
+	pnp_dbg(&dev->dev, "  add %pr\n", res);
+	return pnp_res;
+}
+
 /*
  * Determine whether the specified resource is a possible configuration
  * for this device.
diff --git a/drivers/pnp/support.c b/drivers/pnp/support.c
index 9585c1c1cc36..f5beb24d036a 100644
--- a/drivers/pnp/support.c
+++ b/drivers/pnp/support.c
@@ -69,8 +69,10 @@ char *pnp_resource_type_name(struct resource *res)
 		return "irq";
 	case IORESOURCE_DMA:
 		return "dma";
+	case IORESOURCE_BUS:
+		return "bus";
 	}
-	return NULL;
+	return "unknown";
 }
 
 void dbg_pnp_show_resources(struct pnp_dev *dev, char *desc)
diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c
index c790e0c77d4b..ff05e6189768 100644
--- a/drivers/power/power_supply_sysfs.c
+++ b/drivers/power/power_supply_sysfs.c
@@ -99,6 +99,7 @@ static struct device_attribute power_supply_attrs[] = {
 	POWER_SUPPLY_ATTR(present),
 	POWER_SUPPLY_ATTR(online),
 	POWER_SUPPLY_ATTR(technology),
+	POWER_SUPPLY_ATTR(cycle_count),
 	POWER_SUPPLY_ATTR(voltage_max),
 	POWER_SUPPLY_ATTR(voltage_min),
 	POWER_SUPPLY_ATTR(voltage_max_design),
diff --git a/drivers/pps/Kconfig b/drivers/pps/Kconfig
index cc2eb8edb514..1afe4e03440f 100644
--- a/drivers/pps/Kconfig
+++ b/drivers/pps/Kconfig
@@ -30,4 +30,6 @@ config PPS_DEBUG
 	  messages to the system log.  Select this if you are having a
 	  problem with PPS support and want to see more of what is going on.
 
+source drivers/pps/clients/Kconfig
+
 endmenu
diff --git a/drivers/pps/Makefile b/drivers/pps/Makefile
index 19ea582f431d..98960ddd3188 100644
--- a/drivers/pps/Makefile
+++ b/drivers/pps/Makefile
@@ -4,5 +4,6 @@
 
 pps_core-y			:= pps.o kapi.o sysfs.o
 obj-$(CONFIG_PPS)		:= pps_core.o
+obj-y				+= clients/
 
 ccflags-$(CONFIG_PPS_DEBUG) := -DDEBUG
diff --git a/drivers/pps/clients/Kconfig b/drivers/pps/clients/Kconfig
new file mode 100644
index 000000000000..4e801bd7254f
--- /dev/null
+++ b/drivers/pps/clients/Kconfig
@@ -0,0 +1,25 @@
+#
+# PPS clients configuration
+#
+
+if PPS
+
+comment "PPS clients support"
+
+config PPS_CLIENT_KTIMER
+	tristate "Kernel timer client (Testing client, use for debug)"
+	help
+	  If you say yes here you get support for a PPS debugging client
+	  which uses a kernel timer to generate the PPS signal.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called pps-ktimer.
+
+config PPS_CLIENT_LDISC
+	tristate "PPS line discipline"
+	depends on PPS
+	help
+	  If you say yes here you get support for a PPS source connected
+	  with the CD (Carrier Detect) pin of your serial port.
+
+endif
diff --git a/drivers/pps/clients/Makefile b/drivers/pps/clients/Makefile
new file mode 100644
index 000000000000..812c9b19b430
--- /dev/null
+++ b/drivers/pps/clients/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for PPS clients.
+#
+
+obj-$(CONFIG_PPS_CLIENT_KTIMER)	+= pps-ktimer.o
+obj-$(CONFIG_PPS_CLIENT_LDISC)	+= pps-ldisc.o
+
+ifeq ($(CONFIG_PPS_DEBUG),y)
+EXTRA_CFLAGS += -DDEBUG
+endif
diff --git a/drivers/pps/clients/pps-ktimer.c b/drivers/pps/clients/pps-ktimer.c
new file mode 100644
index 000000000000..e7ef5b8186d0
--- /dev/null
+++ b/drivers/pps/clients/pps-ktimer.c
@@ -0,0 +1,123 @@
+/*
+ * pps-ktimer.c -- kernel timer test client
+ *
+ *
+ * Copyright (C) 2005-2006   Rodolfo Giometti <giometti@linux.it>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/timer.h>
+#include <linux/pps_kernel.h>
+
+/*
+ * Global variables
+ */
+
+static int source;
+static struct timer_list ktimer;
+
+/*
+ * The kernel timer
+ */
+
+static void pps_ktimer_event(unsigned long ptr)
+{
+	struct timespec __ts;
+	struct pps_ktime ts;
+
+	/* First of all we get the time stamp... */
+	getnstimeofday(&__ts);
+
+	pr_info("PPS event at %lu\n", jiffies);
+
+	/* ... and translate it to PPS time data struct */
+	ts.sec = __ts.tv_sec;
+	ts.nsec = __ts.tv_nsec;
+
+	pps_event(source, &ts, PPS_CAPTUREASSERT, NULL);
+
+	mod_timer(&ktimer, jiffies + HZ);
+}
+
+/*
+ * The echo function
+ */
+
+static void pps_ktimer_echo(int source, int event, void *data)
+{
+	pr_info("echo %s %s for source %d\n",
+		event & PPS_CAPTUREASSERT ? "assert" : "",
+		event & PPS_CAPTURECLEAR ? "clear" : "",
+		source);
+}
+
+/*
+ * The PPS info struct
+ */
+
+static struct pps_source_info pps_ktimer_info = {
+	.name		= "ktimer",
+	.path		= "",
+	.mode		= PPS_CAPTUREASSERT | PPS_OFFSETASSERT |
+			  PPS_ECHOASSERT |
+			  PPS_CANWAIT | PPS_TSFMT_TSPEC,
+	.echo		= pps_ktimer_echo,
+	.owner		= THIS_MODULE,
+};
+
+/*
+ * Module staff
+ */
+
+static void __exit pps_ktimer_exit(void)
+{
+	del_timer_sync(&ktimer);
+	pps_unregister_source(source);
+
+	pr_info("ktimer PPS source unregistered\n");
+}
+
+static int __init pps_ktimer_init(void)
+{
+	int ret;
+
+	ret = pps_register_source(&pps_ktimer_info,
+				PPS_CAPTUREASSERT | PPS_OFFSETASSERT);
+	if (ret < 0) {
+		printk(KERN_ERR "cannot register ktimer source\n");
+		return ret;
+	}
+	source = ret;
+
+	setup_timer(&ktimer, pps_ktimer_event, 0);
+	mod_timer(&ktimer, jiffies + HZ);
+
+	pr_info("ktimer PPS source registered at %d\n", source);
+
+	return  0;
+}
+
+module_init(pps_ktimer_init);
+module_exit(pps_ktimer_exit);
+
+MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>");
+MODULE_DESCRIPTION("dummy PPS source by using a kernel timer (just for debug)");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pps/clients/pps-ldisc.c b/drivers/pps/clients/pps-ldisc.c
new file mode 100644
index 000000000000..8e1932d29fd4
--- /dev/null
+++ b/drivers/pps/clients/pps-ldisc.c
@@ -0,0 +1,154 @@
+/*
+ * pps-ldisc.c -- PPS line discipline
+ *
+ *
+ * Copyright (C) 2008	Rodolfo Giometti <giometti@linux.it>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/serial_core.h>
+#include <linux/tty.h>
+#include <linux/pps_kernel.h>
+
+#define PPS_TTY_MAGIC		0x0001
+
+static void pps_tty_dcd_change(struct tty_struct *tty, unsigned int status,
+				struct timespec *ts)
+{
+	int id = (long)tty->disc_data;
+	struct timespec __ts;
+	struct pps_ktime pps_ts;
+
+	/* First of all we get the time stamp... */
+	getnstimeofday(&__ts);
+
+	/* Does caller give us a timestamp? */
+	if (ts) {	/* Yes. Let's use it! */
+		pps_ts.sec = ts->tv_sec;
+		pps_ts.nsec = ts->tv_nsec;
+	} else {	/* No. Do it ourself! */
+		pps_ts.sec = __ts.tv_sec;
+		pps_ts.nsec = __ts.tv_nsec;
+	}
+
+	/* Now do the PPS event report */
+	pps_event(id, &pps_ts, status ? PPS_CAPTUREASSERT : PPS_CAPTURECLEAR,
+			NULL);
+
+	pr_debug("PPS %s at %lu on source #%d\n",
+			status ? "assert" : "clear", jiffies, id);
+}
+
+static int (*alias_n_tty_open)(struct tty_struct *tty);
+
+static int pps_tty_open(struct tty_struct *tty)
+{
+	struct pps_source_info info;
+	struct tty_driver *drv = tty->driver;
+	int index = tty->index + drv->name_base;
+	int ret;
+
+	info.owner = THIS_MODULE;
+	info.dev = NULL;
+	snprintf(info.name, PPS_MAX_NAME_LEN, "%s%d", drv->driver_name, index);
+	snprintf(info.path, PPS_MAX_NAME_LEN, "/dev/%s%d", drv->name, index);
+	info.mode = PPS_CAPTUREBOTH | \
+			PPS_OFFSETASSERT | PPS_OFFSETCLEAR | \
+			PPS_CANWAIT | PPS_TSFMT_TSPEC;
+
+	ret = pps_register_source(&info, PPS_CAPTUREBOTH | \
+				PPS_OFFSETASSERT | PPS_OFFSETCLEAR);
+	if (ret < 0) {
+		pr_err("cannot register PPS source \"%s\"\n", info.path);
+		return ret;
+	}
+	tty->disc_data = (void *)(long)ret;
+
+	/* Should open N_TTY ldisc too */
+	ret = alias_n_tty_open(tty);
+	if (ret < 0)
+		pps_unregister_source((long)tty->disc_data);
+
+	pr_info("PPS source #%d \"%s\" added\n", ret, info.path);
+
+	return 0;
+}
+
+static void (*alias_n_tty_close)(struct tty_struct *tty);
+
+static void pps_tty_close(struct tty_struct *tty)
+{
+	int id = (long)tty->disc_data;
+
+	pps_unregister_source(id);
+	alias_n_tty_close(tty);
+
+	pr_info("PPS source #%d removed\n", id);
+}
+
+static struct tty_ldisc_ops pps_ldisc_ops;
+
+/*
+ * Module stuff
+ */
+
+static int __init pps_tty_init(void)
+{
+	int err;
+
+	/* Inherit the N_TTY's ops */
+	n_tty_inherit_ops(&pps_ldisc_ops);
+
+	/* Save N_TTY's open()/close() methods */
+	alias_n_tty_open = pps_ldisc_ops.open;
+	alias_n_tty_close = pps_ldisc_ops.close;
+
+	/* Init PPS_TTY data */
+	pps_ldisc_ops.owner = THIS_MODULE;
+	pps_ldisc_ops.magic = PPS_TTY_MAGIC;
+	pps_ldisc_ops.name = "pps_tty";
+	pps_ldisc_ops.dcd_change = pps_tty_dcd_change;
+	pps_ldisc_ops.open = pps_tty_open;
+	pps_ldisc_ops.close = pps_tty_close;
+
+	err = tty_register_ldisc(N_PPS, &pps_ldisc_ops);
+	if (err)
+		pr_err("can't register PPS line discipline\n");
+	else
+		pr_info("PPS line discipline registered\n");
+
+	return err;
+}
+
+static void __exit pps_tty_cleanup(void)
+{
+	int err;
+
+	err = tty_unregister_ldisc(N_PPS);
+	if (err)
+		pr_err("can't unregister PPS line discipline\n");
+	else
+		pr_info("PPS line discipline removed\n");
+}
+
+module_init(pps_tty_init);
+module_exit(pps_tty_cleanup);
+
+MODULE_ALIAS_LDISC(N_PPS);
+MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>");
+MODULE_DESCRIPTION("PPS TTY device driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/rtc/hctosys.c b/drivers/rtc/hctosys.c
index 33c0e98243ee..bc90b091f195 100644
--- a/drivers/rtc/hctosys.c
+++ b/drivers/rtc/hctosys.c
@@ -22,48 +22,57 @@
  * the best guess is to add 0.5s.
  */
 
+int rtc_hctosys_ret = -ENODEV;
+
 static int __init rtc_hctosys(void)
 {
-	int err;
+	int err = -ENODEV;
 	struct rtc_time tm;
+	struct timespec tv = {
+		.tv_nsec = NSEC_PER_SEC >> 1,
+	};
 	struct rtc_device *rtc = rtc_class_open(CONFIG_RTC_HCTOSYS_DEVICE);
 
 	if (rtc == NULL) {
-		printk("%s: unable to open rtc device (%s)\n",
+		pr_err("%s: unable to open rtc device (%s)\n",
 			__FILE__, CONFIG_RTC_HCTOSYS_DEVICE);
-		return -ENODEV;
+		goto err_open;
 	}
 
 	err = rtc_read_time(rtc, &tm);
-	if (err == 0) {
-		err = rtc_valid_tm(&tm);
-		if (err == 0) {
-			struct timespec tv;
+	if (err) {
+		dev_err(rtc->dev.parent,
+			"hctosys: unable to read the hardware clock\n");
+		goto err_read;
 
-			tv.tv_nsec = NSEC_PER_SEC >> 1;
+	}
 
-			rtc_tm_to_time(&tm, &tv.tv_sec);
+	err = rtc_valid_tm(&tm);
+	if (err) {
+		dev_err(rtc->dev.parent,
+			"hctosys: invalid date/time\n");
+		goto err_invalid;
+	}
 
-			do_settimeofday(&tv);
+	rtc_tm_to_time(&tm, &tv.tv_sec);
 
-			dev_info(rtc->dev.parent,
-				"setting system clock to "
-				"%d-%02d-%02d %02d:%02d:%02d UTC (%u)\n",
-				tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday,
-				tm.tm_hour, tm.tm_min, tm.tm_sec,
-				(unsigned int) tv.tv_sec);
-		}
-		else
-			dev_err(rtc->dev.parent,
-				"hctosys: invalid date/time\n");
-	}
-	else
-		dev_err(rtc->dev.parent,
-			"hctosys: unable to read the hardware clock\n");
+	do_settimeofday(&tv);
 
+	dev_info(rtc->dev.parent,
+		"setting system clock to "
+		"%d-%02d-%02d %02d:%02d:%02d UTC (%u)\n",
+		tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday,
+		tm.tm_hour, tm.tm_min, tm.tm_sec,
+		(unsigned int) tv.tv_sec);
+
+err_invalid:
+err_read:
 	rtc_class_close(rtc);
 
-	return 0;
+err_open:
+	rtc_hctosys_ret = err;
+
+	return err;
 }
 
 late_initcall(rtc_hctosys);
diff --git a/drivers/rtc/rtc-ds1742.c b/drivers/rtc/rtc-ds1742.c
index a1273360a44e..cad9ceb89baf 100644
--- a/drivers/rtc/rtc-ds1742.c
+++ b/drivers/rtc/rtc-ds1742.c
@@ -184,6 +184,7 @@ static int __devinit ds1742_rtc_probe(struct platform_device *pdev)
 	pdata->size_nvram = pdata->size - RTC_SIZE;
 	pdata->ioaddr_rtc = ioaddr + pdata->size_nvram;
 
+	sysfs_bin_attr_init(&pdata->nvram_attr);
 	pdata->nvram_attr.attr.name = "nvram";
 	pdata->nvram_attr.attr.mode = S_IRUGO | S_IWUSR;
 	pdata->nvram_attr.read = ds1742_nvram_read;
diff --git a/drivers/rtc/rtc-sysfs.c b/drivers/rtc/rtc-sysfs.c
index 7dd23a6fc825..380083ca572f 100644
--- a/drivers/rtc/rtc-sysfs.c
+++ b/drivers/rtc/rtc-sysfs.c
@@ -107,8 +107,9 @@ rtc_sysfs_show_hctosys(struct device *dev, struct device_attribute *attr,
 		char *buf)
 {
 #ifdef CONFIG_RTC_HCTOSYS_DEVICE
-	if (strcmp(dev_name(&to_rtc_device(dev)->dev),
-		   CONFIG_RTC_HCTOSYS_DEVICE) == 0)
+	if (rtc_hctosys_ret == 0 &&
+			strcmp(dev_name(&to_rtc_device(dev)->dev),
+				CONFIG_RTC_HCTOSYS_DEVICE) == 0)
 		return sprintf(buf, "1\n");
 	else
 #endif
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index 4951aa82e9f5..bbea90baf98f 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -26,6 +26,7 @@
 #include <asm/ebcdic.h>
 #include <asm/idals.h>
 #include <asm/itcw.h>
+#include <asm/diag.h>
 
 /* This is ugly... */
 #define PRINTK_HEADER "dasd:"
@@ -2212,6 +2213,13 @@ static int dasd_open(struct block_device *bdev, fmode_t mode)
 		goto out;
 	}
 
+	if ((mode & FMODE_WRITE) &&
+	    (test_bit(DASD_FLAG_DEVICE_RO, &base->flags) ||
+	     (base->features & DASD_FEATURE_READONLY))) {
+		rc = -EROFS;
+		goto out;
+	}
+
 	return 0;
 
 out:
@@ -2289,6 +2297,34 @@ dasd_exit(void)
  * SECTION: common functions for ccw_driver use
  */
 
+/*
+ * Is the device read-only?
+ * Note that this function does not report the setting of the
+ * readonly device attribute, but how it is configured in z/VM.
+ */
+int dasd_device_is_ro(struct dasd_device *device)
+{
+	struct ccw_dev_id dev_id;
+	struct diag210 diag_data;
+	int rc;
+
+	if (!MACHINE_IS_VM)
+		return 0;
+	ccw_device_get_id(device->cdev, &dev_id);
+	memset(&diag_data, 0, sizeof(diag_data));
+	diag_data.vrdcdvno = dev_id.devno;
+	diag_data.vrdclen = sizeof(diag_data);
+	rc = diag210(&diag_data);
+	if (rc == 0 || rc == 2) {
+		return diag_data.vrdcvfla & 0x80;
+	} else {
+		DBF_EVENT(DBF_WARNING, "diag210 failed for dev=%04x with rc=%d",
+			  dev_id.devno, rc);
+		return 0;
+	}
+}
+EXPORT_SYMBOL_GPL(dasd_device_is_ro);
+
 static void dasd_generic_auto_online(void *data, async_cookie_t cookie)
 {
 	struct ccw_device *cdev = data;
diff --git a/drivers/s390/block/dasd_3990_erp.c b/drivers/s390/block/dasd_3990_erp.c
index 44796ba4eb9b..51224f76b980 100644
--- a/drivers/s390/block/dasd_3990_erp.c
+++ b/drivers/s390/block/dasd_3990_erp.c
@@ -1045,6 +1045,10 @@ dasd_3990_erp_com_rej(struct dasd_ccw_req * erp, char *sense)
 
 		erp->retries = 5;
 
+	} else if (sense[1] & SNS1_WRITE_INHIBITED) {
+		dev_err(&device->cdev->dev, "An I/O request was rejected"
+			" because writing is inhibited\n");
+		erp = dasd_3990_erp_cleanup(erp, DASD_CQR_FAILED);
 	} else {
 		/* fatal error -  set status to FAILED
 		   internal error 09 - Command Reject */
diff --git a/drivers/s390/block/dasd_devmap.c b/drivers/s390/block/dasd_devmap.c
index d49766f3b940..8e23919c8704 100644
--- a/drivers/s390/block/dasd_devmap.c
+++ b/drivers/s390/block/dasd_devmap.c
@@ -742,6 +742,7 @@ dasd_ro_store(struct device *dev, struct device_attribute *attr,
 	      const char *buf, size_t count)
 {
 	struct dasd_devmap *devmap;
+	struct dasd_device *device;
 	int val;
 	char *endp;
 
@@ -758,12 +759,14 @@ dasd_ro_store(struct device *dev, struct device_attribute *attr,
 		devmap->features |= DASD_FEATURE_READONLY;
 	else
 		devmap->features &= ~DASD_FEATURE_READONLY;
-	if (devmap->device)
-		devmap->device->features = devmap->features;
-	if (devmap->device && devmap->device->block
-	    && devmap->device->block->gdp)
-		set_disk_ro(devmap->device->block->gdp, val);
+	device = devmap->device;
+	if (device) {
+		device->features = devmap->features;
+		val = val || test_bit(DASD_FLAG_DEVICE_RO, &device->flags);
+	}
 	spin_unlock(&dasd_devmap_lock);
+	if (device && device->block && device->block->gdp)
+		set_disk_ro(device->block->gdp, val);
 	return count;
 }
 
diff --git a/drivers/s390/block/dasd_diag.c b/drivers/s390/block/dasd_diag.c
index 6e14863f5c70..687f323cdc38 100644
--- a/drivers/s390/block/dasd_diag.c
+++ b/drivers/s390/block/dasd_diag.c
@@ -145,12 +145,10 @@ dasd_diag_erp(struct dasd_device *device)
 	mdsk_term_io(device);
 	rc = mdsk_init_io(device, device->block->bp_block, 0, NULL);
 	if (rc == 4) {
-		if (!(device->features & DASD_FEATURE_READONLY)) {
+		if (!(test_and_set_bit(DASD_FLAG_DEVICE_RO, &device->flags)))
 			pr_warning("%s: The access mode of a DIAG device "
 				   "changed to read-only\n",
 				   dev_name(&device->cdev->dev));
-			device->features |= DASD_FEATURE_READONLY;
-		}
 		rc = 0;
 	}
 	if (rc)
@@ -449,7 +447,7 @@ dasd_diag_check_device(struct dasd_device *device)
 		rc = -EIO;
 	} else {
 		if (rc == 4)
-			device->features |= DASD_FEATURE_READONLY;
+			set_bit(DASD_FLAG_DEVICE_RO, &device->flags);
 		pr_info("%s: New DASD with %ld byte/block, total size %ld "
 			"KB%s\n", dev_name(&device->cdev->dev),
 			(unsigned long) block->bp_block,
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index 1cca21aafaba..01f4e7a34aa8 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -1089,6 +1089,7 @@ dasd_eckd_check_characteristics(struct dasd_device *device)
 	struct dasd_eckd_private *private;
 	struct dasd_block *block;
 	int is_known, rc;
+	int readonly;
 
 	if (!ccw_device_is_pathgroup(device->cdev)) {
 		dev_warn(&device->cdev->dev,
@@ -1182,15 +1183,20 @@ dasd_eckd_check_characteristics(struct dasd_device *device)
 	else
 		private->real_cyl = private->rdc_data.no_cyl;
 
+	readonly = dasd_device_is_ro(device);
+	if (readonly)
+		set_bit(DASD_FLAG_DEVICE_RO, &device->flags);
+
 	dev_info(&device->cdev->dev, "New DASD %04X/%02X (CU %04X/%02X) "
-		 "with %d cylinders, %d heads, %d sectors\n",
+		 "with %d cylinders, %d heads, %d sectors%s\n",
 		 private->rdc_data.dev_type,
 		 private->rdc_data.dev_model,
 		 private->rdc_data.cu_type,
 		 private->rdc_data.cu_model.model,
 		 private->real_cyl,
 		 private->rdc_data.trk_per_cyl,
-		 private->rdc_data.sec_per_trk);
+		 private->rdc_data.sec_per_trk,
+		 readonly ? ", read-only device" : "");
 	return 0;
 
 out_err3:
@@ -2839,8 +2845,13 @@ static int dasd_symm_io(struct dasd_device *device, void __user *argp)
 	char *psf_data, *rssd_result;
 	struct dasd_ccw_req *cqr;
 	struct ccw1 *ccw;
+	char psf0, psf1;
 	int rc;
 
+	if (!capable(CAP_SYS_ADMIN) && !capable(CAP_SYS_RAWIO))
+		return -EACCES;
+	psf0 = psf1 = 0;
+
 	/* Copy parms from caller */
 	rc = -EFAULT;
 	if (copy_from_user(&usrparm, argp, sizeof(usrparm)))
@@ -2869,12 +2880,8 @@ static int dasd_symm_io(struct dasd_device *device, void __user *argp)
 			   (void __user *)(unsigned long) usrparm.psf_data,
 			   usrparm.psf_data_len))
 		goto out_free;
-
-	/* sanity check on syscall header */
-	if (psf_data[0] != 0x17 && psf_data[1] != 0xce) {
-		rc = -EINVAL;
-		goto out_free;
-	}
+	psf0 = psf_data[0];
+	psf1 = psf_data[1];
 
 	/* setup CCWs for PSF + RSSD */
 	cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 2 , 0, device);
@@ -2925,7 +2932,9 @@ out_free:
 	kfree(rssd_result);
 	kfree(psf_data);
 out:
-	DBF_DEV_EVENT(DBF_WARNING, device, "Symmetrix ioctl: rc=%d", rc);
+	DBF_DEV_EVENT(DBF_WARNING, device,
+		      "Symmetrix ioctl (0x%02x 0x%02x): rc=%d",
+		      (int) psf0, (int) psf1, rc);
 	return rc;
 }
 
diff --git a/drivers/s390/block/dasd_fba.c b/drivers/s390/block/dasd_fba.c
index 0f152444ac77..37282b90eecc 100644
--- a/drivers/s390/block/dasd_fba.c
+++ b/drivers/s390/block/dasd_fba.c
@@ -124,6 +124,7 @@ dasd_fba_check_characteristics(struct dasd_device *device)
 	struct dasd_fba_private *private;
 	struct ccw_device *cdev = device->cdev;
 	int rc;
+	int readonly;
 
 	private = (struct dasd_fba_private *) device->private;
 	if (!private) {
@@ -162,16 +163,21 @@ dasd_fba_check_characteristics(struct dasd_device *device)
 		return rc;
 	}
 
+	readonly = dasd_device_is_ro(device);
+	if (readonly)
+		set_bit(DASD_FLAG_DEVICE_RO, &device->flags);
+
 	dev_info(&device->cdev->dev,
 		 "New FBA DASD %04X/%02X (CU %04X/%02X) with %d MB "
-		 "and %d B/blk\n",
+		 "and %d B/blk%s\n",
 		 cdev->id.dev_type,
 		 cdev->id.dev_model,
 		 cdev->id.cu_type,
 		 cdev->id.cu_model,
 		 ((private->rdc_data.blk_bdsa *
 		   (private->rdc_data.blk_size >> 9)) >> 11),
-		 private->rdc_data.blk_size);
+		 private->rdc_data.blk_size,
+		 readonly ? ", read-only device" : "");
 	return 0;
 }
 
diff --git a/drivers/s390/block/dasd_genhd.c b/drivers/s390/block/dasd_genhd.c
index 94f92a1247f2..30a1ca3d08b7 100644
--- a/drivers/s390/block/dasd_genhd.c
+++ b/drivers/s390/block/dasd_genhd.c
@@ -70,7 +70,8 @@ int dasd_gendisk_alloc(struct dasd_block *block)
 	}
 	len += sprintf(gdp->disk_name + len, "%c", 'a'+(base->devindex%26));
 
-	if (block->base->features & DASD_FEATURE_READONLY)
+	if (base->features & DASD_FEATURE_READONLY ||
+	    test_bit(DASD_FLAG_DEVICE_RO, &base->flags))
 		set_disk_ro(gdp, 1);
 	gdp->private_data = block;
 	gdp->queue = block->request_queue;
diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h
index ed73ce550822..a91d4a97d4f2 100644
--- a/drivers/s390/block/dasd_int.h
+++ b/drivers/s390/block/dasd_int.h
@@ -436,6 +436,10 @@ struct dasd_block {
 #define DASD_FLAG_OFFLINE	3	/* device is in offline processing */
 #define DASD_FLAG_EER_SNSS	4	/* A SNSS is required */
 #define DASD_FLAG_EER_IN_USE	5	/* A SNSS request is running */
+#define DASD_FLAG_DEVICE_RO	6	/* The device itself is read-only. Don't
+					 * confuse this with the user specified
+					 * read-only feature.
+					 */
 
 void dasd_put_device_wake(struct dasd_device *);
 
@@ -609,6 +613,9 @@ char *dasd_get_sense(struct irb *);
 void dasd_device_set_stop_bits(struct dasd_device *, int);
 void dasd_device_remove_stop_bits(struct dasd_device *, int);
 
+int dasd_device_is_ro(struct dasd_device *);
+
+
 /* externals in dasd_devmap.c */
 extern int dasd_max_devindex;
 extern int dasd_probeonly;
diff --git a/drivers/s390/block/dasd_ioctl.c b/drivers/s390/block/dasd_ioctl.c
index 7039d9cf0fb4..3479f8158a1b 100644
--- a/drivers/s390/block/dasd_ioctl.c
+++ b/drivers/s390/block/dasd_ioctl.c
@@ -199,7 +199,8 @@ dasd_ioctl_format(struct block_device *bdev, void __user *argp)
 	if (!argp)
 		return -EINVAL;
 
-	if (block->base->features & DASD_FEATURE_READONLY)
+	if (block->base->features & DASD_FEATURE_READONLY ||
+	    test_bit(DASD_FLAG_DEVICE_RO, &block->base->flags))
 		return -EROFS;
 	if (copy_from_user(&fdata, argp, sizeof(struct format_data_t)))
 		return -EFAULT;
@@ -349,7 +350,8 @@ dasd_ioctl_set_ro(struct block_device *bdev, void __user *argp)
 		return -EINVAL;
 	if (get_user(intval, (int __user *)argp))
 		return -EFAULT;
-
+	if (!intval && test_bit(DASD_FLAG_DEVICE_RO, &block->base->flags))
+		return -EROFS;
 	set_disk_ro(bdev->bd_disk, intval);
 	return dasd_set_feature(block->base->cdev, DASD_FEATURE_READONLY, intval);
 }
diff --git a/drivers/s390/char/raw3270.c b/drivers/s390/char/raw3270.c
index 62ddf5202b79..2a4c566456e7 100644
--- a/drivers/s390/char/raw3270.c
+++ b/drivers/s390/char/raw3270.c
@@ -373,7 +373,7 @@ raw3270_irq (struct ccw_device *cdev, unsigned long intparm, struct irb *irb)
 		rq->rc = ccw_device_start(rp->cdev, &rq->ccw,
 					  (unsigned long) rq, 0, 0);
 		if (rq->rc == 0)
-			return;	/* Sucessfully restarted. */
+			return;	/* Successfully restarted. */
 		break;
 	case RAW3270_IO_STOP:
 		if (!rq)
diff --git a/drivers/s390/char/sclp.c b/drivers/s390/char/sclp.c
index ec88c59842e3..f6d72e1f2a38 100644
--- a/drivers/s390/char/sclp.c
+++ b/drivers/s390/char/sclp.c
@@ -196,7 +196,7 @@ __sclp_start_request(struct sclp_req *req)
 	req->start_count++;
 
 	if (rc == 0) {
-		/* Sucessfully started request */
+		/* Successfully started request */
 		req->status = SCLP_REQ_RUNNING;
 		sclp_running_state = sclp_running_state_running;
 		__sclp_set_request_timer(SCLP_RETRY_INTERVAL * HZ,
diff --git a/drivers/s390/char/sclp_cmd.c b/drivers/s390/char/sclp_cmd.c
index b3beab610da4..fc7ae05ce48a 100644
--- a/drivers/s390/char/sclp_cmd.c
+++ b/drivers/s390/char/sclp_cmd.c
@@ -704,6 +704,13 @@ int sclp_chp_deconfigure(struct chp_id chpid)
 	return do_chp_configure(SCLP_CMDW_DECONFIGURE_CHPATH | chpid.id << 8);
 }
 
+int arch_get_memory_phys_device(unsigned long start_pfn)
+{
+	if (!rzm)
+		return 0;
+	return PFN_PHYS(start_pfn) / rzm;
+}
+
 struct chp_info_sccb {
 	struct sccb_header header;
 	u8 recognized[SCLP_CHP_INFO_MASK_SIZE];
diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c
index c6abb75c4615..6d229f3523a0 100644
--- a/drivers/s390/cio/device.c
+++ b/drivers/s390/cio/device.c
@@ -764,7 +764,7 @@ static void sch_create_and_recog_new_device(struct subchannel *sch)
 static void io_subchannel_register(struct ccw_device *cdev)
 {
 	struct subchannel *sch;
-	int ret;
+	int ret, adjust_init_count = 1;
 	unsigned long flags;
 
 	sch = to_subchannel(cdev->dev.parent);
@@ -793,6 +793,7 @@ static void io_subchannel_register(struct ccw_device *cdev)
 					      cdev->private->dev_id.ssid,
 					      cdev->private->dev_id.devno);
 		}
+		adjust_init_count = 0;
 		goto out;
 	}
 	/*
@@ -818,7 +819,7 @@ out:
 	cdev->private->flags.recog_done = 1;
 	wake_up(&cdev->private->wait_q);
 out_err:
-	if (atomic_dec_and_test(&ccw_device_init_count))
+	if (adjust_init_count && atomic_dec_and_test(&ccw_device_init_count))
 		wake_up(&ccw_device_init_wq);
 }
 
diff --git a/drivers/s390/cio/qdio_debug.c b/drivers/s390/cio/qdio_debug.c
index c94eb2a0fa2e..6ce83f56d537 100644
--- a/drivers/s390/cio/qdio_debug.c
+++ b/drivers/s390/cio/qdio_debug.c
@@ -33,7 +33,6 @@ void qdio_allocate_dbf(struct qdio_initialize *init_data,
 	DBF_HEX(&init_data->input_handler, sizeof(void *));
 	DBF_HEX(&init_data->output_handler, sizeof(void *));
 	DBF_HEX(&init_data->int_parm, sizeof(long));
-	DBF_HEX(&init_data->flags, sizeof(long));
 	DBF_HEX(&init_data->input_sbal_addr_array, sizeof(void *));
 	DBF_HEX(&init_data->output_sbal_addr_array, sizeof(void *));
 	DBF_EVENT("irq:%8lx", (unsigned long)irq_ptr);
diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c
index 232ef047ba34..4f8f74311778 100644
--- a/drivers/s390/cio/qdio_main.c
+++ b/drivers/s390/cio/qdio_main.c
@@ -588,10 +588,11 @@ static void qdio_kick_handler(struct qdio_q *q)
 	if (q->is_input_q) {
 		qperf_inc(q, inbound_handler);
 		DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "kih s:%02x c:%02x", start, count);
-	} else
+	} else {
 		qperf_inc(q, outbound_handler);
 		DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "koh: s:%02x c:%02x",
 			      start, count);
+	}
 
 	q->handler(q->irq_ptr->cdev, q->qdio_error, q->nr, start, count,
 		   q->irq_ptr->int_parm);
diff --git a/drivers/s390/net/Kconfig b/drivers/s390/net/Kconfig
index cb909a5b5047..977bb4d4ed15 100644
--- a/drivers/s390/net/Kconfig
+++ b/drivers/s390/net/Kconfig
@@ -43,6 +43,16 @@ config SMSGIUCV
 	  Select this option if you want to be able to receive SMSG messages
 	  from other VM guest systems.
 
+config SMSGIUCV_EVENT
+	tristate "Deliver IUCV special messages as uevents (VM only)"
+	depends on SMSGIUCV
+	help
+	  Select this option to deliver CP special messages (SMSGs) as
+	  uevents.  The driver handles only those special messages that
+	  start with "APP".
+
+	  To compile as a module, choose M. The module name is "smsgiucv_app".
+
 config CLAW
 	tristate "CLAW device support"
 	depends on CCW && NETDEVICES
diff --git a/drivers/s390/net/Makefile b/drivers/s390/net/Makefile
index 6cab5a62f99e..4dfe8c1092da 100644
--- a/drivers/s390/net/Makefile
+++ b/drivers/s390/net/Makefile
@@ -6,6 +6,7 @@ ctcm-y += ctcm_main.o ctcm_fsms.o ctcm_mpc.o ctcm_sysfs.o ctcm_dbug.o
 obj-$(CONFIG_CTCM) += ctcm.o fsm.o
 obj-$(CONFIG_NETIUCV) += netiucv.o fsm.o
 obj-$(CONFIG_SMSGIUCV) += smsgiucv.o
+obj-$(CONFIG_SMSGIUCV_EVENT) += smsgiucv_app.o
 obj-$(CONFIG_LCS) += lcs.o
 obj-$(CONFIG_CLAW) += claw.o
 qeth-y += qeth_core_sys.o qeth_core_main.o qeth_core_mpc.o
diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h
index a3ac4456e0b1..fcd005aad989 100644
--- a/drivers/s390/net/qeth_core.h
+++ b/drivers/s390/net/qeth_core.h
@@ -763,7 +763,8 @@ static inline int qeth_get_micros(void)
 
 static inline int qeth_get_ip_version(struct sk_buff *skb)
 {
-	switch (skb->protocol) {
+	struct ethhdr *ehdr = (struct ethhdr *)skb->data;
+	switch (ehdr->h_proto) {
 	case ETH_P_IPV6:
 		return 6;
 	case ETH_P_IP:
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index fa8a519218ac..3bd4206f3470 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -537,7 +537,8 @@ static void qeth_send_control_data_cb(struct qeth_channel *channel,
 			dev_err(&card->gdev->dev,
 				"The qeth device is not configured "
 				"for the OSI layer required by z/VM\n");
-		qeth_schedule_recovery(card);
+		else
+			qeth_schedule_recovery(card);
 		goto out;
 	}
 
@@ -1113,8 +1114,6 @@ static int qeth_setup_card(struct qeth_card *card)
 	card->ipato.enabled = 0;
 	card->ipato.invert4 = 0;
 	card->ipato.invert6 = 0;
-	if (card->info.type == QETH_CARD_TYPE_IQD)
-		card->options.checksum_type = NO_CHECKSUMMING;
 	/* init QDIO stuff */
 	qeth_init_qdio_info(card);
 	return 0;
@@ -3805,9 +3804,6 @@ static int qeth_qdio_establish(struct qeth_card *card)
 	init_data.input_handler          = card->discipline.input_handler;
 	init_data.output_handler         = card->discipline.output_handler;
 	init_data.int_parm               = (unsigned long) card;
-	init_data.flags                  = QDIO_INBOUND_0COPY_SBALS |
-					   QDIO_OUTBOUND_0COPY_SBALS |
-					   QDIO_USE_OUTBOUND_PCIS;
 	init_data.input_sbal_addr_array  = (void **) in_sbal_ptrs;
 	init_data.output_sbal_addr_array = (void **) out_sbal_ptrs;
 
diff --git a/drivers/s390/net/qeth_core_sys.c b/drivers/s390/net/qeth_core_sys.c
index 88ae4357136a..25dfd5abd19b 100644
--- a/drivers/s390/net/qeth_core_sys.c
+++ b/drivers/s390/net/qeth_core_sys.c
@@ -8,6 +8,9 @@
  *		 Frank Blaschka <frank.blaschka@de.ibm.com>
  */
 
+#define KMSG_COMPONENT "qeth"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
 #include <linux/list.h>
 #include <linux/rwsem.h>
 #include <asm/ebcdic.h>
diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c
index 51fde6f2e0b8..6f1e3036bafd 100644
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -1071,11 +1071,9 @@ static int qeth_l2_recover(void *ptr)
 		dev_info(&card->gdev->dev,
 			"Device successfully recovered!\n");
 	else {
-		if (card->dev) {
-			rtnl_lock();
-			dev_close(card->dev);
-			rtnl_unlock();
-		}
+		rtnl_lock();
+		dev_close(card->dev);
+		rtnl_unlock();
 		dev_warn(&card->gdev->dev, "The qeth device driver "
 			"failed to recover an error on the device\n");
 	}
@@ -1129,11 +1127,9 @@ static int qeth_l2_pm_resume(struct ccwgroup_device *gdev)
 	if (card->state == CARD_STATE_RECOVER) {
 		rc = __qeth_l2_set_online(card->gdev, 1);
 		if (rc) {
-			if (card->dev) {
-				rtnl_lock();
-				dev_close(card->dev);
-				rtnl_unlock();
-			}
+			rtnl_lock();
+			dev_close(card->dev);
+			rtnl_unlock();
 		}
 	} else
 		rc = __qeth_l2_set_online(card->gdev, 0);
diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c
index 5475834ab916..b3b6e872d806 100644
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -1691,39 +1691,43 @@ qeth_diags_trace_cb(struct qeth_card *card, struct qeth_reply *reply,
 
 	cmd = (struct qeth_ipa_cmd *)data;
 	rc = cmd->hdr.return_code;
-	if (rc) {
+	if (rc)
 		QETH_DBF_TEXT_(TRACE, 2, "dxter%x", rc);
-		if (cmd->data.diagass.action == QETH_DIAGS_CMD_TRACE_ENABLE) {
-			switch (rc) {
-			case IPA_RC_HARDWARE_AUTH_ERROR:
-				dev_warn(&card->gdev->dev, "The device is not "
-					"authorized to run as a HiperSockets "
-					"network traffic analyzer\n");
-				break;
-			case IPA_RC_TRACE_ALREADY_ACTIVE:
-				dev_warn(&card->gdev->dev, "A HiperSockets "
-					"network traffic analyzer is already "
-					"active in the HiperSockets LAN\n");
-				break;
-			default:
-				break;
-			}
-		}
-		return 0;
-	}
-
 	switch (cmd->data.diagass.action) {
 	case QETH_DIAGS_CMD_TRACE_QUERY:
 		break;
 	case QETH_DIAGS_CMD_TRACE_DISABLE:
-		card->info.promisc_mode = SET_PROMISC_MODE_OFF;
-		dev_info(&card->gdev->dev, "The HiperSockets network traffic "
-			"analyzer is deactivated\n");
+		switch (rc) {
+		case 0:
+		case IPA_RC_INVALID_SUBCMD:
+			card->info.promisc_mode = SET_PROMISC_MODE_OFF;
+			dev_info(&card->gdev->dev, "The HiperSockets network "
+				"traffic analyzer is deactivated\n");
+			break;
+		default:
+			break;
+		}
 		break;
 	case QETH_DIAGS_CMD_TRACE_ENABLE:
-		card->info.promisc_mode = SET_PROMISC_MODE_ON;
-		dev_info(&card->gdev->dev, "The HiperSockets network traffic "
-			"analyzer is activated\n");
+		switch (rc) {
+		case 0:
+			card->info.promisc_mode = SET_PROMISC_MODE_ON;
+			dev_info(&card->gdev->dev, "The HiperSockets network "
+				"traffic analyzer is activated\n");
+			break;
+		case IPA_RC_HARDWARE_AUTH_ERROR:
+			dev_warn(&card->gdev->dev, "The device is not "
+				"authorized to run as a HiperSockets network "
+				"traffic analyzer\n");
+			break;
+		case IPA_RC_TRACE_ALREADY_ACTIVE:
+			dev_warn(&card->gdev->dev, "A HiperSockets "
+				"network traffic analyzer is already "
+				"active in the HiperSockets LAN\n");
+			break;
+		default:
+			break;
+		}
 		break;
 	default:
 		QETH_DBF_MESSAGE(2, "Unknown sniffer action (0x%04x) on %s\n",
@@ -2215,11 +2219,9 @@ static int qeth_l3_stop_card(struct qeth_card *card, int recovery_mode)
 		if (recovery_mode)
 			qeth_l3_stop(card->dev);
 		else {
-			if (card->dev) {
-				rtnl_lock();
-				dev_close(card->dev);
-				rtnl_unlock();
-			}
+			rtnl_lock();
+			dev_close(card->dev);
+			rtnl_unlock();
 		}
 		if (!card->use_hard_stop) {
 			rc = qeth_send_stoplan(card);
@@ -2900,10 +2902,8 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	int data_offset = -1;
 	int nr_frags;
 
-	if ((card->info.type == QETH_CARD_TYPE_IQD) &&
-	    (((skb->protocol != htons(ETH_P_IPV6)) &&
-	      (skb->protocol != htons(ETH_P_IP))) ||
-	     card->options.sniffer))
+	if (((card->info.type == QETH_CARD_TYPE_IQD) && (!ipv)) ||
+	     card->options.sniffer)
 			goto tx_drop;
 
 	if ((card->state != CARD_STATE_UP) || !card->lan_online) {
@@ -2949,14 +2949,14 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		if (data_offset < 0)
 			skb_pull(new_skb, ETH_HLEN);
 	} else {
-		if (new_skb->protocol == htons(ETH_P_IP)) {
+		if (ipv == 4) {
 			if (card->dev->type == ARPHRD_IEEE802_TR)
 				skb_pull(new_skb, TR_HLEN);
 			else
 				skb_pull(new_skb, ETH_HLEN);
 		}
 
-		if (new_skb->protocol == ETH_P_IPV6 && card->vlangrp &&
+		if (ipv == 6 && card->vlangrp &&
 				vlan_tx_tag_present(new_skb)) {
 			skb_push(new_skb, VLAN_HLEN);
 			skb_copy_to_linear_data(new_skb, new_skb->data + 4, 4);
@@ -3534,11 +3534,9 @@ static int qeth_l3_pm_resume(struct ccwgroup_device *gdev)
 	if (card->state == CARD_STATE_RECOVER) {
 		rc = __qeth_l3_set_online(card->gdev, 1);
 		if (rc) {
-			if (card->dev) {
-				rtnl_lock();
-				dev_close(card->dev);
-				rtnl_unlock();
-			}
+			rtnl_lock();
+			dev_close(card->dev);
+			rtnl_unlock();
 		}
 	} else
 		rc = __qeth_l3_set_online(card->gdev, 0);
diff --git a/drivers/s390/net/smsgiucv.c b/drivers/s390/net/smsgiucv.c
index 67f2485d2372..ecef1edee701 100644
--- a/drivers/s390/net/smsgiucv.c
+++ b/drivers/s390/net/smsgiucv.c
@@ -31,9 +31,9 @@
 
 struct smsg_callback {
 	struct list_head list;
-	char *prefix;
+	const char *prefix;
 	int len;
-	void (*callback)(char *from, char *str);
+	void (*callback)(const char *from, char *str);
 };
 
 MODULE_AUTHOR
@@ -100,8 +100,8 @@ static void smsg_message_pending(struct iucv_path *path,
 	kfree(buffer);
 }
 
-int smsg_register_callback(char *prefix,
-			   void (*callback)(char *from, char *str))
+int smsg_register_callback(const char *prefix,
+			   void (*callback)(const char *from, char *str))
 {
 	struct smsg_callback *cb;
 
@@ -117,8 +117,9 @@ int smsg_register_callback(char *prefix,
 	return 0;
 }
 
-void smsg_unregister_callback(char *prefix,
-			      void (*callback)(char *from, char *str))
+void smsg_unregister_callback(const char *prefix,
+			      void (*callback)(const char *from,
+					       char *str))
 {
 	struct smsg_callback *cb, *tmp;
 
@@ -176,7 +177,7 @@ static const struct dev_pm_ops smsg_pm_ops = {
 
 static struct device_driver smsg_driver = {
 	.owner = THIS_MODULE,
-	.name = "SMSGIUCV",
+	.name = SMSGIUCV_DRV_NAME,
 	.bus  = &iucv_bus,
 	.pm = &smsg_pm_ops,
 };
diff --git a/drivers/s390/net/smsgiucv.h b/drivers/s390/net/smsgiucv.h
index 67f5d4f8378d..149a1151608d 100644
--- a/drivers/s390/net/smsgiucv.h
+++ b/drivers/s390/net/smsgiucv.h
@@ -5,6 +5,10 @@
  * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
  */
 
-int  smsg_register_callback(char *, void (*)(char *, char *));
-void smsg_unregister_callback(char *, void (*)(char *, char *));
+#define SMSGIUCV_DRV_NAME     "SMSGIUCV"
+
+int  smsg_register_callback(const char *,
+			    void (*)(const char *, char *));
+void smsg_unregister_callback(const char *,
+			      void (*)(const char *, char *));
 
diff --git a/drivers/s390/net/smsgiucv_app.c b/drivers/s390/net/smsgiucv_app.c
new file mode 100644
index 000000000000..91579dc6a2b0
--- /dev/null
+++ b/drivers/s390/net/smsgiucv_app.c
@@ -0,0 +1,211 @@
+/*
+ * Deliver z/VM CP special messages (SMSG) as uevents.
+ *
+ * The driver registers for z/VM CP special messages with the
+ * "APP" prefix. Incoming messages are delivered to user space
+ * as uevents.
+ *
+ * Copyright IBM Corp. 2010
+ * Author(s): Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
+ *
+ */
+#define KMSG_COMPONENT		"smsgiucv_app"
+#define pr_fmt(fmt)		KMSG_COMPONENT ": " fmt
+
+#include <linux/ctype.h>
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/kobject.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <net/iucv/iucv.h>
+#include "smsgiucv.h"
+
+/* prefix used for SMSG registration */
+#define SMSG_PREFIX		"APP"
+
+/* SMSG related uevent environment variables */
+#define ENV_SENDER_STR		"SMSG_SENDER="
+#define ENV_SENDER_LEN		(strlen(ENV_SENDER_STR) + 8 + 1)
+#define ENV_PREFIX_STR		"SMSG_ID="
+#define ENV_PREFIX_LEN		(strlen(ENV_PREFIX_STR) + \
+				 strlen(SMSG_PREFIX) + 1)
+#define ENV_TEXT_STR		"SMSG_TEXT="
+#define ENV_TEXT_LEN(msg)	(strlen(ENV_TEXT_STR) + strlen((msg)) + 1)
+
+/* z/VM user ID which is permitted to send SMSGs
+ * If the value is undefined or empty (""), special messages are
+ * accepted from any z/VM user ID. */
+static char *sender;
+module_param(sender, charp, 0400);
+MODULE_PARM_DESC(sender, "z/VM user ID from which CP SMSGs are accepted");
+
+/* SMSG device representation */
+static struct device *smsg_app_dev;
+
+/* list element for queuing received messages for delivery */
+struct smsg_app_event {
+	struct list_head list;
+	char *buf;
+	char *envp[4];
+};
+
+/* queue for outgoing uevents */
+static LIST_HEAD(smsg_event_queue);
+static DEFINE_SPINLOCK(smsg_event_queue_lock);
+
+static void smsg_app_event_free(struct smsg_app_event *ev)
+{
+	kfree(ev->buf);
+	kfree(ev);
+}
+
+static struct smsg_app_event *smsg_app_event_alloc(const char *from,
+						   const char *msg)
+{
+	struct smsg_app_event *ev;
+
+	ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
+	if (!ev)
+		return NULL;
+
+	ev->buf = kzalloc(ENV_SENDER_LEN + ENV_PREFIX_LEN +
+			  ENV_TEXT_LEN(msg), GFP_ATOMIC);
+	if (!ev->buf) {
+		kfree(ev);
+		return NULL;
+	}
+
+	/* setting up environment pointers into buf */
+	ev->envp[0] = ev->buf;
+	ev->envp[1] = ev->envp[0] + ENV_SENDER_LEN;
+	ev->envp[2] = ev->envp[1] + ENV_PREFIX_LEN;
+	ev->envp[3] = NULL;
+
+	/* setting up environment: sender, prefix name, and message text */
+	snprintf(ev->envp[0], ENV_SENDER_LEN, ENV_SENDER_STR "%s", from);
+	snprintf(ev->envp[1], ENV_PREFIX_LEN, ENV_PREFIX_STR "%s", SMSG_PREFIX);
+	snprintf(ev->envp[2], ENV_TEXT_LEN(msg), ENV_TEXT_STR "%s", msg);
+
+	return ev;
+}
+
+static void smsg_event_work_fn(struct work_struct *work)
+{
+	LIST_HEAD(event_queue);
+	struct smsg_app_event *p, *n;
+	struct device *dev;
+
+	dev = get_device(smsg_app_dev);
+	if (!dev)
+		return;
+
+	spin_lock_bh(&smsg_event_queue_lock);
+	list_splice_init(&smsg_event_queue, &event_queue);
+	spin_unlock_bh(&smsg_event_queue_lock);
+
+	list_for_each_entry_safe(p, n, &event_queue, list) {
+		list_del(&p->list);
+		kobject_uevent_env(&dev->kobj, KOBJ_CHANGE, p->envp);
+		smsg_app_event_free(p);
+	}
+
+	put_device(dev);
+}
+static DECLARE_WORK(smsg_event_work, smsg_event_work_fn);
+
+static void smsg_app_callback(const char *from, char *msg)
+{
+	struct smsg_app_event *se;
+
+	/* check if the originating z/VM user ID matches
+	 * the configured sender. */
+	if (sender && strlen(sender) > 0 && strcmp(from, sender) != 0)
+		return;
+
+	/* get start of message text (skip prefix and leading blanks) */
+	msg += strlen(SMSG_PREFIX);
+	while (*msg && isspace(*msg))
+		msg++;
+	if (*msg == '\0')
+		return;
+
+	/* allocate event list element and its environment */
+	se = smsg_app_event_alloc(from, msg);
+	if (!se)
+		return;
+
+	/* queue event and schedule work function */
+	spin_lock(&smsg_event_queue_lock);
+	list_add_tail(&se->list, &smsg_event_queue);
+	spin_unlock(&smsg_event_queue_lock);
+
+	schedule_work(&smsg_event_work);
+	return;
+}
+
+static int __init smsgiucv_app_init(void)
+{
+	struct device_driver *smsgiucv_drv;
+	int rc;
+
+	if (!MACHINE_IS_VM)
+		return -ENODEV;
+
+	smsg_app_dev = kzalloc(sizeof(*smsg_app_dev), GFP_KERNEL);
+	if (!smsg_app_dev)
+		return -ENOMEM;
+
+	smsgiucv_drv = driver_find(SMSGIUCV_DRV_NAME, &iucv_bus);
+	if (!smsgiucv_drv) {
+		kfree(smsg_app_dev);
+		return -ENODEV;
+	}
+
+	rc = dev_set_name(smsg_app_dev, KMSG_COMPONENT);
+	if (rc) {
+		kfree(smsg_app_dev);
+		goto fail_put_driver;
+	}
+	smsg_app_dev->bus = &iucv_bus;
+	smsg_app_dev->parent = iucv_root;
+	smsg_app_dev->release = (void (*)(struct device *)) kfree;
+	smsg_app_dev->driver = smsgiucv_drv;
+	rc = device_register(smsg_app_dev);
+	if (rc) {
+		put_device(smsg_app_dev);
+		goto fail_put_driver;
+	}
+
+	/* register with the smsgiucv device driver */
+	rc = smsg_register_callback(SMSG_PREFIX, smsg_app_callback);
+	if (rc) {
+		device_unregister(smsg_app_dev);
+		goto fail_put_driver;
+	}
+
+	rc = 0;
+fail_put_driver:
+	put_driver(smsgiucv_drv);
+	return rc;
+}
+module_init(smsgiucv_app_init);
+
+static void __exit smsgiucv_app_exit(void)
+{
+	/* unregister callback */
+	smsg_unregister_callback(SMSG_PREFIX, smsg_app_callback);
+
+	/* cancel pending work and flush any queued event work */
+	cancel_work_sync(&smsg_event_work);
+	smsg_event_work_fn(&smsg_event_work);
+
+	device_unregister(smsg_app_dev);
+}
+module_exit(smsgiucv_app_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Deliver z/VM CP SMSG as uevents");
+MODULE_AUTHOR("Hendrik Brueckner <brueckner@linux.vnet.ibm.com>");
diff --git a/drivers/s390/scsi/zfcp_qdio.c b/drivers/s390/scsi/zfcp_qdio.c
index 71b97ff77cf0..6479273a3094 100644
--- a/drivers/s390/scsi/zfcp_qdio.c
+++ b/drivers/s390/scsi/zfcp_qdio.c
@@ -319,8 +319,6 @@ static void zfcp_qdio_setup_init_data(struct qdio_initialize *id,
 	id->input_handler = zfcp_qdio_int_resp;
 	id->output_handler = zfcp_qdio_int_req;
 	id->int_parm = (unsigned long) qdio;
-	id->flags = QDIO_INBOUND_0COPY_SBALS |
-		    QDIO_OUTBOUND_0COPY_SBALS | QDIO_USE_OUTBOUND_PCIS;
 	id->input_sbal_addr_array = (void **) (qdio->resp_q.sbal);
 	id->output_sbal_addr_array = (void **) (qdio->req_q.sbal);
 
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 9191d1ea6451..75f2336807cb 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -1,9 +1,15 @@
 menu "SCSI device support"
 
+config SCSI_MOD
+       tristate
+       default y if SCSI=n || SCSI=y
+       default m if SCSI=m
+
 config RAID_ATTRS
 	tristate "RAID Transport Class"
 	default n
 	depends on BLOCK
+	depends on SCSI_MOD
 	---help---
 	  Provides RAID
 
diff --git a/drivers/scsi/a100u2w.c b/drivers/scsi/a100u2w.c
index 208d6df9ed59..ff5716d5f044 100644
--- a/drivers/scsi/a100u2w.c
+++ b/drivers/scsi/a100u2w.c
@@ -492,7 +492,7 @@ static void init_alloc_map(struct orc_host * host)
  *	init_orchid		-	initialise the host adapter
  *	@host:host adapter to initialise
  *
- *	Initialise the controller and if neccessary load the firmware.
+ *	Initialise the controller and if necessary load the firmware.
  *
  *	Returns -1 if the initialisation fails.
  */
diff --git a/drivers/scsi/be2iscsi/be_cmds.c b/drivers/scsi/be2iscsi/be_cmds.c
index 67098578fba4..cda6642c7368 100644
--- a/drivers/scsi/be2iscsi/be_cmds.c
+++ b/drivers/scsi/be2iscsi/be_cmds.c
@@ -32,18 +32,11 @@ void be_mcc_notify(struct beiscsi_hba *phba)
 unsigned int alloc_mcc_tag(struct beiscsi_hba *phba)
 {
 	unsigned int tag = 0;
-	unsigned int num = 0;
 
-mcc_tag_rdy:
 	if (phba->ctrl.mcc_tag_available) {
 		tag = phba->ctrl.mcc_tag[phba->ctrl.mcc_alloc_index];
 		phba->ctrl.mcc_tag[phba->ctrl.mcc_alloc_index] = 0;
 		phba->ctrl.mcc_numtag[tag] = 0;
-	} else {
-		udelay(100);
-		num++;
-		if (num < mcc_timeout)
-			goto mcc_tag_rdy;
 	}
 	if (tag) {
 		phba->ctrl.mcc_tag_available--;
diff --git a/drivers/scsi/be2iscsi/be_iscsi.c b/drivers/scsi/be2iscsi/be_iscsi.c
index 29a3aaf35f9f..c3928cb8b042 100644
--- a/drivers/scsi/be2iscsi/be_iscsi.c
+++ b/drivers/scsi/be2iscsi/be_iscsi.c
@@ -482,7 +482,7 @@ static int beiscsi_open_conn(struct iscsi_endpoint *ep,
 	tag = mgmt_open_connection(phba, dst_addr, beiscsi_ep);
 	if (!tag) {
 		SE_DEBUG(DBG_LVL_1,
-			 "mgmt_invalidate_connection Failed for cid=%d \n",
+			 "mgmt_open_connection Failed for cid=%d \n",
 			 beiscsi_ep->ep_cid);
 	} else {
 		wait_event_interruptible(phba->ctrl.mcc_wait[tag],
@@ -701,7 +701,7 @@ void beiscsi_conn_stop(struct iscsi_cls_conn *cls_conn, int flag)
 	if (!tag) {
 		SE_DEBUG(DBG_LVL_1,
 			 "mgmt_invalidate_connection Failed for cid=%d \n",
-			 beiscsi_ep->ep_cid);
+			  beiscsi_ep->ep_cid);
 	} else {
 		wait_event_interruptible(phba->ctrl.mcc_wait[tag],
 					 phba->ctrl.mcc_numtag[tag]);
diff --git a/drivers/scsi/be2iscsi/be_main.c b/drivers/scsi/be2iscsi/be_main.c
index 7c22616ab141..fcfb29e02d8a 100644
--- a/drivers/scsi/be2iscsi/be_main.c
+++ b/drivers/scsi/be2iscsi/be_main.c
@@ -58,6 +58,123 @@ static int beiscsi_slave_configure(struct scsi_device *sdev)
 	return 0;
 }
 
+static int beiscsi_eh_abort(struct scsi_cmnd *sc)
+{
+	struct iscsi_cls_session *cls_session;
+	struct iscsi_task *aborted_task = (struct iscsi_task *)sc->SCp.ptr;
+	struct beiscsi_io_task *aborted_io_task;
+	struct iscsi_conn *conn;
+	struct beiscsi_conn *beiscsi_conn;
+	struct beiscsi_hba *phba;
+	struct iscsi_session *session;
+	struct invalidate_command_table *inv_tbl;
+	unsigned int cid, tag, num_invalidate;
+
+	cls_session = starget_to_session(scsi_target(sc->device));
+	session = cls_session->dd_data;
+
+	spin_lock_bh(&session->lock);
+	if (!aborted_task || !aborted_task->sc) {
+		/* we raced */
+		spin_unlock_bh(&session->lock);
+		return SUCCESS;
+	}
+
+	aborted_io_task = aborted_task->dd_data;
+	if (!aborted_io_task->scsi_cmnd) {
+		/* raced or invalid command */
+		spin_unlock_bh(&session->lock);
+		return SUCCESS;
+	}
+	spin_unlock_bh(&session->lock);
+	conn = aborted_task->conn;
+	beiscsi_conn = conn->dd_data;
+	phba = beiscsi_conn->phba;
+
+	/* invalidate iocb */
+	cid = beiscsi_conn->beiscsi_conn_cid;
+	inv_tbl = phba->inv_tbl;
+	memset(inv_tbl, 0x0, sizeof(*inv_tbl));
+	inv_tbl->cid = cid;
+	inv_tbl->icd = aborted_io_task->psgl_handle->sgl_index;
+	num_invalidate = 1;
+	tag = mgmt_invalidate_icds(phba, inv_tbl, num_invalidate, cid);
+	if (!tag) {
+		shost_printk(KERN_WARNING, phba->shost,
+			     "mgmt_invalidate_icds could not be"
+			     " submitted\n");
+		return FAILED;
+	} else {
+		wait_event_interruptible(phba->ctrl.mcc_wait[tag],
+					 phba->ctrl.mcc_numtag[tag]);
+		free_mcc_tag(&phba->ctrl, tag);
+	}
+
+	return iscsi_eh_abort(sc);
+}
+
+static int beiscsi_eh_device_reset(struct scsi_cmnd *sc)
+{
+	struct iscsi_task *abrt_task;
+	struct beiscsi_io_task *abrt_io_task;
+	struct iscsi_conn *conn;
+	struct beiscsi_conn *beiscsi_conn;
+	struct beiscsi_hba *phba;
+	struct iscsi_session *session;
+	struct iscsi_cls_session *cls_session;
+	struct invalidate_command_table *inv_tbl;
+	unsigned int cid, tag, i, num_invalidate;
+	int rc = FAILED;
+
+	/* invalidate iocbs */
+	cls_session = starget_to_session(scsi_target(sc->device));
+	session = cls_session->dd_data;
+	spin_lock_bh(&session->lock);
+	if (!session->leadconn || session->state != ISCSI_STATE_LOGGED_IN)
+		goto unlock;
+
+	conn = session->leadconn;
+	beiscsi_conn = conn->dd_data;
+	phba = beiscsi_conn->phba;
+	cid = beiscsi_conn->beiscsi_conn_cid;
+	inv_tbl = phba->inv_tbl;
+	memset(inv_tbl, 0x0, sizeof(*inv_tbl) * BE2_CMDS_PER_CXN);
+	num_invalidate = 0;
+	for (i = 0; i < conn->session->cmds_max; i++) {
+		abrt_task = conn->session->cmds[i];
+		abrt_io_task = abrt_task->dd_data;
+		if (!abrt_task->sc || abrt_task->state == ISCSI_TASK_FREE)
+			continue;
+
+		if (abrt_task->sc->device->lun != abrt_task->sc->device->lun)
+			continue;
+
+		inv_tbl->cid = cid;
+		inv_tbl->icd = abrt_io_task->psgl_handle->sgl_index;
+		num_invalidate++;
+		inv_tbl++;
+	}
+	spin_unlock_bh(&session->lock);
+	inv_tbl = phba->inv_tbl;
+
+	tag = mgmt_invalidate_icds(phba, inv_tbl, num_invalidate, cid);
+	if (!tag) {
+		shost_printk(KERN_WARNING, phba->shost,
+			     "mgmt_invalidate_icds could not be"
+			     " submitted\n");
+		return FAILED;
+	} else {
+		wait_event_interruptible(phba->ctrl.mcc_wait[tag],
+					 phba->ctrl.mcc_numtag[tag]);
+		free_mcc_tag(&phba->ctrl, tag);
+	}
+
+	return iscsi_eh_device_reset(sc);
+unlock:
+	spin_unlock_bh(&session->lock);
+	return rc;
+}
+
 /*------------------- PCI Driver operations and data ----------------- */
 static DEFINE_PCI_DEVICE_TABLE(beiscsi_pci_id_table) = {
 	{ PCI_DEVICE(BE_VENDOR_ID, BE_DEVICE_ID1) },
@@ -74,12 +191,12 @@ static struct scsi_host_template beiscsi_sht = {
 	.name = "ServerEngines 10Gbe open-iscsi Initiator Driver",
 	.proc_name = DRV_NAME,
 	.queuecommand = iscsi_queuecommand,
-	.eh_abort_handler = iscsi_eh_abort,
 	.change_queue_depth = iscsi_change_queue_depth,
 	.slave_configure = beiscsi_slave_configure,
 	.target_alloc = iscsi_target_alloc,
-	.eh_device_reset_handler = iscsi_eh_device_reset,
-	.eh_target_reset_handler = iscsi_eh_target_reset,
+	.eh_abort_handler = beiscsi_eh_abort,
+	.eh_device_reset_handler = beiscsi_eh_device_reset,
+	.eh_target_reset_handler = iscsi_eh_session_reset,
 	.sg_tablesize = BEISCSI_SGLIST_ELEMENTS,
 	.can_queue = BE2_IO_DEPTH,
 	.this_id = -1,
@@ -242,7 +359,7 @@ static void beiscsi_get_params(struct beiscsi_hba *phba)
 				    + BE2_TMFS
 				    + BE2_NOPOUT_REQ));
 	phba->params.cxns_per_ctrl = phba->fw_config.iscsi_cid_count;
-	phba->params.asyncpdus_per_ctrl = phba->fw_config.iscsi_cid_count;;
+	phba->params.asyncpdus_per_ctrl = phba->fw_config.iscsi_cid_count * 2;
 	phba->params.icds_per_ctrl = phba->fw_config.iscsi_icd_count;;
 	phba->params.num_sge_per_io = BE2_SGE;
 	phba->params.defpdu_hdr_sz = BE2_DEFPDU_HDR_SZ;
@@ -946,14 +1063,18 @@ static void hwi_complete_cmd(struct beiscsi_conn *beiscsi_conn,
 	case HWH_TYPE_IO:
 	case HWH_TYPE_IO_RD:
 		if ((task->hdr->opcode & ISCSI_OPCODE_MASK) ==
-		    ISCSI_OP_NOOP_OUT) {
+		     ISCSI_OP_NOOP_OUT)
 			be_complete_nopin_resp(beiscsi_conn, task, psol);
-		} else
+		else
 			be_complete_io(beiscsi_conn, task, psol);
 		break;
 
 	case HWH_TYPE_LOGOUT:
-		be_complete_logout(beiscsi_conn, task, psol);
+		if ((task->hdr->opcode & ISCSI_OPCODE_MASK) == ISCSI_OP_LOGOUT)
+			be_complete_logout(beiscsi_conn, task, psol);
+		else
+			be_complete_tmf(beiscsi_conn, task, psol);
+
 		break;
 
 	case HWH_TYPE_LOGIN:
@@ -962,10 +1083,6 @@ static void hwi_complete_cmd(struct beiscsi_conn *beiscsi_conn,
 			 "- Solicited path \n");
 		break;
 
-	case HWH_TYPE_TMF:
-		be_complete_tmf(beiscsi_conn, task, psol);
-		break;
-
 	case HWH_TYPE_NOP:
 		be_complete_nopin_resp(beiscsi_conn, task, psol);
 		break;
@@ -2052,7 +2169,7 @@ static void beiscsi_init_wrb_handle(struct beiscsi_hba *phba)
 	num_cxn_wrb = (mem_descr_wrb->mem_array[idx].size) /
 		      ((sizeof(struct iscsi_wrb) *
 			phba->params.wrbs_per_cxn));
-	for (index = 0; index < phba->params.cxns_per_ctrl; index += 2) {
+	for (index = 0; index < phba->params.cxns_per_ctrl * 2; index += 2) {
 		pwrb_context = &phwi_ctrlr->wrb_context[index];
 		if (num_cxn_wrb) {
 			for (j = 0; j < phba->params.wrbs_per_cxn; j++) {
@@ -3073,14 +3190,18 @@ static unsigned char hwi_enable_intr(struct beiscsi_hba *phba)
 		reg |= MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK;
 		SE_DEBUG(DBG_LVL_8, "reg =x%08x addr=%p \n", reg, addr);
 		iowrite32(reg, addr);
-		for (i = 0; i <= phba->num_cpus; i++) {
-			eq = &phwi_context->be_eq[i].q;
+		if (!phba->msix_enabled) {
+			eq = &phwi_context->be_eq[0].q;
 			SE_DEBUG(DBG_LVL_8, "eq->id=%d \n", eq->id);
 			hwi_ring_eq_db(phba, eq->id, 0, 0, 1, 1);
+		} else {
+			for (i = 0; i <= phba->num_cpus; i++) {
+				eq = &phwi_context->be_eq[i].q;
+				SE_DEBUG(DBG_LVL_8, "eq->id=%d \n", eq->id);
+				hwi_ring_eq_db(phba, eq->id, 0, 0, 1, 1);
+			}
 		}
-	} else
-		shost_printk(KERN_WARNING, phba->shost,
-			     "In hwi_enable_intr, Not Enabled \n");
+	}
 	return true;
 }
 
@@ -3476,19 +3597,13 @@ static int beiscsi_iotask(struct iscsi_task *task, struct scatterlist *sg,
 
 static int beiscsi_mtask(struct iscsi_task *task)
 {
-	struct beiscsi_io_task *aborted_io_task, *io_task = task->dd_data;
+	struct beiscsi_io_task *io_task = task->dd_data;
 	struct iscsi_conn *conn = task->conn;
 	struct beiscsi_conn *beiscsi_conn = conn->dd_data;
 	struct beiscsi_hba *phba = beiscsi_conn->phba;
-	struct iscsi_session *session;
 	struct iscsi_wrb *pwrb = NULL;
-	struct hwi_controller *phwi_ctrlr;
-	struct hwi_wrb_context *pwrb_context;
-	struct wrb_handle *pwrb_handle;
 	unsigned int doorbell = 0;
-	unsigned int i, cid;
-	struct iscsi_task *aborted_task;
-	unsigned int tag;
+	unsigned int cid;
 
 	cid = beiscsi_conn->beiscsi_conn_cid;
 	pwrb = io_task->pwrb_handle->pwrb;
@@ -3499,6 +3614,7 @@ static int beiscsi_mtask(struct iscsi_task *task)
 		      io_task->pwrb_handle->wrb_index);
 	AMAP_SET_BITS(struct amap_iscsi_wrb, sgl_icd_idx, pwrb,
 		      io_task->psgl_handle->sgl_index);
+
 	switch (task->hdr->opcode & ISCSI_OPCODE_MASK) {
 	case ISCSI_OP_LOGIN:
 		AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb,
@@ -3523,33 +3639,6 @@ static int beiscsi_mtask(struct iscsi_task *task)
 		hwi_write_buffer(pwrb, task);
 		break;
 	case ISCSI_OP_SCSI_TMFUNC:
-		session = conn->session;
-		i = ((struct iscsi_tm *)task->hdr)->rtt;
-		phwi_ctrlr = phba->phwi_ctrlr;
-		pwrb_context = &phwi_ctrlr->wrb_context[cid -
-					    phba->fw_config.iscsi_cid_start];
-		pwrb_handle = pwrb_context->pwrb_handle_basestd[be32_to_cpu(i)
-								>> 16];
-		aborted_task = pwrb_handle->pio_handle;
-		 if (!aborted_task)
-			return 0;
-
-		aborted_io_task = aborted_task->dd_data;
-		if (!aborted_io_task->scsi_cmnd)
-			return 0;
-
-		tag = mgmt_invalidate_icds(phba,
-				     aborted_io_task->psgl_handle->sgl_index,
-				     cid);
-		if (!tag) {
-			shost_printk(KERN_WARNING, phba->shost,
-				     "mgmt_invalidate_icds could not be"
-				     " submitted\n");
-		} else {
-			wait_event_interruptible(phba->ctrl.mcc_wait[tag],
-						 phba->ctrl.mcc_numtag[tag]);
-			free_mcc_tag(&phba->ctrl, tag);
-		}
 		AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb,
 			      INI_TMF_CMD);
 		AMAP_SET_BITS(struct amap_iscsi_wrb, dmsg, pwrb, 0);
@@ -3558,7 +3647,7 @@ static int beiscsi_mtask(struct iscsi_task *task)
 	case ISCSI_OP_LOGOUT:
 		AMAP_SET_BITS(struct amap_iscsi_wrb, dmsg, pwrb, 0);
 		AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb,
-				HWH_TYPE_LOGOUT);
+			      HWH_TYPE_LOGOUT);
 		hwi_write_buffer(pwrb, task);
 		break;
 
@@ -3584,17 +3673,12 @@ static int beiscsi_mtask(struct iscsi_task *task)
 
 static int beiscsi_task_xmit(struct iscsi_task *task)
 {
-	struct iscsi_conn *conn = task->conn;
 	struct beiscsi_io_task *io_task = task->dd_data;
 	struct scsi_cmnd *sc = task->sc;
-	struct beiscsi_conn *beiscsi_conn = conn->dd_data;
 	struct scatterlist *sg;
 	int num_sg;
 	unsigned int  writedir = 0, xferlen = 0;
 
-	SE_DEBUG(DBG_LVL_4, "\n cid=%d In beiscsi_task_xmit task=%p conn=%p \t"
-		 "beiscsi_conn=%p \n", beiscsi_conn->beiscsi_conn_cid,
-		 task, conn, beiscsi_conn);
 	if (!sc)
 		return beiscsi_mtask(task);
 
@@ -3699,7 +3783,6 @@ static int __devinit beiscsi_dev_probe(struct pci_dev *pcidev,
 			" Failed in beiscsi_hba_alloc \n");
 		goto disable_pci;
 	}
-	SE_DEBUG(DBG_LVL_8, " phba = %p \n", phba);
 
 	switch (pcidev->device) {
 	case BE_DEVICE_ID1:
diff --git a/drivers/scsi/be2iscsi/be_main.h b/drivers/scsi/be2iscsi/be_main.h
index c53a80ab796c..87ec21280a37 100644
--- a/drivers/scsi/be2iscsi/be_main.h
+++ b/drivers/scsi/be2iscsi/be_main.h
@@ -257,6 +257,11 @@ struct hba_parameters {
 	unsigned int num_sge;
 };
 
+struct invalidate_command_table {
+	unsigned short icd;
+	unsigned short cid;
+} __packed;
+
 struct beiscsi_hba {
 	struct hba_parameters params;
 	struct hwi_controller *phwi_ctrlr;
@@ -329,6 +334,8 @@ struct beiscsi_hba {
 	struct work_struct work_cqs;	/* The work being queued */
 	struct be_ctrl_info ctrl;
 	unsigned int generation;
+	struct invalidate_command_table inv_tbl[128];
+
 };
 
 struct beiscsi_session {
@@ -491,8 +498,6 @@ struct hwi_async_entry {
 	struct list_head data_busy_list;
 };
 
-#define BE_MIN_ASYNC_ENTRIES 128
-
 struct hwi_async_pdu_context {
 	struct {
 		struct be_bus_address pa_base;
@@ -533,7 +538,7 @@ struct hwi_async_pdu_context {
 	 * This is a varying size list! Do not add anything
 	 * after this entry!!
 	 */
-	struct hwi_async_entry async_entry[BE_MIN_ASYNC_ENTRIES];
+	struct hwi_async_entry async_entry[BE2_MAX_SESSIONS * 2];
 };
 
 #define PDUCQE_CODE_MASK	0x0000003F
diff --git a/drivers/scsi/be2iscsi/be_mgmt.c b/drivers/scsi/be2iscsi/be_mgmt.c
index 317bcd042ced..72617b650a7e 100644
--- a/drivers/scsi/be2iscsi/be_mgmt.c
+++ b/drivers/scsi/be2iscsi/be_mgmt.c
@@ -145,14 +145,15 @@ unsigned char mgmt_epfw_cleanup(struct beiscsi_hba *phba, unsigned short chute)
 }
 
 unsigned char mgmt_invalidate_icds(struct beiscsi_hba *phba,
-				   unsigned int icd, unsigned int cid)
+				struct invalidate_command_table *inv_tbl,
+				unsigned int num_invalidate, unsigned int cid)
 {
 	struct be_dma_mem nonemb_cmd;
 	struct be_ctrl_info *ctrl = &phba->ctrl;
 	struct be_mcc_wrb *wrb;
 	struct be_sge *sge;
 	struct invalidate_commands_params_in *req;
-	unsigned int tag = 0;
+	unsigned int i, tag = 0;
 
 	spin_lock(&ctrl->mbox_lock);
 	tag = alloc_mcc_tag(phba);
@@ -183,9 +184,12 @@ unsigned char mgmt_invalidate_icds(struct beiscsi_hba *phba,
 			sizeof(*req));
 	req->ref_handle = 0;
 	req->cleanup_type = CMD_ISCSI_COMMAND_INVALIDATE;
-	req->icd_count = 0;
-	req->table[req->icd_count].icd = icd;
-	req->table[req->icd_count].cid = cid;
+	for (i = 0; i < num_invalidate; i++) {
+		req->table[i].icd = inv_tbl->icd;
+		req->table[i].cid = inv_tbl->cid;
+		req->icd_count++;
+		inv_tbl++;
+	}
 	sge->pa_hi = cpu_to_le32(upper_32_bits(nonemb_cmd.dma));
 	sge->pa_lo = cpu_to_le32(nonemb_cmd.dma & 0xFFFFFFFF);
 	sge->len = cpu_to_le32(nonemb_cmd.size);
diff --git a/drivers/scsi/be2iscsi/be_mgmt.h b/drivers/scsi/be2iscsi/be_mgmt.h
index ecead6a5aa56..3d316b82feb1 100644
--- a/drivers/scsi/be2iscsi/be_mgmt.h
+++ b/drivers/scsi/be2iscsi/be_mgmt.h
@@ -94,7 +94,8 @@ unsigned char mgmt_upload_connection(struct beiscsi_hba *phba,
 				     unsigned short cid,
 				     unsigned int upload_flag);
 unsigned char mgmt_invalidate_icds(struct beiscsi_hba *phba,
-				   unsigned int icd, unsigned int cid);
+				struct invalidate_command_table *inv_tbl,
+				unsigned int num_invalidate, unsigned int cid);
 
 struct iscsi_invalidate_connection_params_in {
 	struct be_cmd_req_hdr hdr;
@@ -116,11 +117,6 @@ union iscsi_invalidate_connection_params {
 	struct iscsi_invalidate_connection_params_out response;
 } __packed;
 
-struct invalidate_command_table {
-	unsigned short icd;
-	unsigned short cid;
-} __packed;
-
 struct invalidate_commands_params_in {
 	struct be_cmd_req_hdr hdr;
 	unsigned int ref_handle;
diff --git a/drivers/scsi/bfa/Makefile b/drivers/scsi/bfa/Makefile
index 1d6009490d1c..17e06cae71b2 100644
--- a/drivers/scsi/bfa/Makefile
+++ b/drivers/scsi/bfa/Makefile
@@ -2,14 +2,14 @@ obj-$(CONFIG_SCSI_BFA_FC) := bfa.o
 
 bfa-y := bfad.o bfad_intr.o bfad_os.o bfad_im.o bfad_attr.o bfad_fwimg.o
 
-bfa-y += bfa_core.o bfa_ioc.o bfa_iocfc.o bfa_fcxp.o bfa_lps.o
-bfa-y += bfa_hw_cb.o bfa_hw_ct.o bfa_intr.o bfa_timer.o bfa_rport.o 
+bfa-y += bfa_core.o bfa_ioc.o bfa_ioc_ct.o bfa_ioc_cb.o bfa_iocfc.o bfa_fcxp.o
+bfa-y += bfa_lps.o bfa_hw_cb.o bfa_hw_ct.o bfa_intr.o bfa_timer.o bfa_rport.o
 bfa-y += bfa_fcport.o bfa_port.o bfa_uf.o bfa_sgpg.o bfa_module.o bfa_ioim.o
 bfa-y += bfa_itnim.o bfa_fcpim.o bfa_tskim.o bfa_log.o bfa_log_module.o
 bfa-y += bfa_csdebug.o bfa_sm.o plog.o
 
-bfa-y += fcbuild.o fabric.o fcpim.o vfapi.o fcptm.o bfa_fcs.o bfa_fcs_port.o 
+bfa-y += fcbuild.o fabric.o fcpim.o vfapi.o fcptm.o bfa_fcs.o bfa_fcs_port.o
 bfa-y += bfa_fcs_uf.o bfa_fcs_lport.o fab.o fdmi.o ms.o ns.o scn.o loop.o
 bfa-y += lport_api.o n2n.o rport.o rport_api.o rport_ftrs.o vport.o
 
-ccflags-y := -I$(obj) -I$(obj)/include -I$(obj)/include/cna
+ccflags-y := -I$(obj) -I$(obj)/include -I$(obj)/include/cna -DBFA_PERF_BUILD
diff --git a/drivers/scsi/bfa/bfa_core.c b/drivers/scsi/bfa/bfa_core.c
index 44e2d1155c51..0c08e185a766 100644
--- a/drivers/scsi/bfa/bfa_core.c
+++ b/drivers/scsi/bfa/bfa_core.c
@@ -385,6 +385,15 @@ bfa_debug_fwsave(struct bfa_s *bfa, void *trcdata, int *trclen)
 }
 
 /**
+ * Clear the saved firmware trace information of an IOC.
+ */
+void
+bfa_debug_fwsave_clear(struct bfa_s *bfa)
+{
+	bfa_ioc_debug_fwsave_clear(&bfa->ioc);
+}
+
+/**
  * 		Fetch firmware trace data.
  *
  * @param[in]		bfa			BFA instance
@@ -399,4 +408,14 @@ bfa_debug_fwtrc(struct bfa_s *bfa, void *trcdata, int *trclen)
 {
 	return bfa_ioc_debug_fwtrc(&bfa->ioc, trcdata, trclen);
 }
+
+/**
+ * Reset hw semaphore & usage cnt regs and initialize.
+ */
+void
+bfa_chip_reset(struct bfa_s *bfa)
+{
+	bfa_ioc_ownership_reset(&bfa->ioc);
+	bfa_ioc_pll_init(&bfa->ioc);
+}
 #endif
diff --git a/drivers/scsi/bfa/bfa_fcport.c b/drivers/scsi/bfa/bfa_fcport.c
index aef648b55dfc..c589488db0c1 100644
--- a/drivers/scsi/bfa/bfa_fcport.c
+++ b/drivers/scsi/bfa/bfa_fcport.c
@@ -23,40 +23,33 @@
 #include <cs/bfa_plog.h>
 #include <aen/bfa_aen_port.h>
 
-BFA_TRC_FILE(HAL, PPORT);
-BFA_MODULE(pport);
-
-#define bfa_pport_callback(__pport, __event) do {			\
-	if ((__pport)->bfa->fcs) {      \
-		(__pport)->event_cbfn((__pport)->event_cbarg, (__event));      \
-	} else {							\
-		(__pport)->hcb_event = (__event);      \
-		bfa_cb_queue((__pport)->bfa, &(__pport)->hcb_qe,	\
-		__bfa_cb_port_event, (__pport));      \
-	}								\
-} while (0)
+BFA_TRC_FILE(HAL, FCPORT);
+BFA_MODULE(fcport);
 
 /*
  * The port is considered disabled if corresponding physical port or IOC are
  * disabled explicitly
  */
 #define BFA_PORT_IS_DISABLED(bfa) \
-	((bfa_pport_is_disabled(bfa) == BFA_TRUE) || \
+	((bfa_fcport_is_disabled(bfa) == BFA_TRUE) || \
 	(bfa_ioc_is_disabled(&bfa->ioc) == BFA_TRUE))
 
 /*
  * forward declarations
  */
-static bfa_boolean_t bfa_pport_send_enable(struct bfa_pport_s *port);
-static bfa_boolean_t bfa_pport_send_disable(struct bfa_pport_s *port);
-static void     bfa_pport_update_linkinfo(struct bfa_pport_s *pport);
-static void     bfa_pport_reset_linkinfo(struct bfa_pport_s *pport);
-static void     bfa_pport_set_wwns(struct bfa_pport_s *port);
-static void     __bfa_cb_port_event(void *cbarg, bfa_boolean_t complete);
-static void     __bfa_cb_port_stats(void *cbarg, bfa_boolean_t complete);
-static void     __bfa_cb_port_stats_clr(void *cbarg, bfa_boolean_t complete);
-static void     bfa_port_stats_timeout(void *cbarg);
-static void     bfa_port_stats_clr_timeout(void *cbarg);
+static bfa_boolean_t bfa_fcport_send_enable(struct bfa_fcport_s *fcport);
+static bfa_boolean_t bfa_fcport_send_disable(struct bfa_fcport_s *fcport);
+static void     bfa_fcport_update_linkinfo(struct bfa_fcport_s *fcport);
+static void     bfa_fcport_reset_linkinfo(struct bfa_fcport_s *fcport);
+static void     bfa_fcport_set_wwns(struct bfa_fcport_s *fcport);
+static void     __bfa_cb_fcport_event(void *cbarg, bfa_boolean_t complete);
+static void     bfa_fcport_callback(struct bfa_fcport_s *fcport,
+				enum bfa_pport_linkstate event);
+static void     bfa_fcport_queue_cb(struct bfa_fcport_ln_s *ln,
+				enum bfa_pport_linkstate event);
+static void     __bfa_cb_fcport_stats_clr(void *cbarg, bfa_boolean_t complete);
+static void     bfa_fcport_stats_get_timeout(void *cbarg);
+static void     bfa_fcport_stats_clr_timeout(void *cbarg);
 
 /**
  *  bfa_pport_private
@@ -65,111 +58,114 @@ static void     bfa_port_stats_clr_timeout(void *cbarg);
 /**
  * BFA port state machine events
  */
-enum bfa_pport_sm_event {
-	BFA_PPORT_SM_START = 1,	/*  start port state machine */
-	BFA_PPORT_SM_STOP = 2,	/*  stop port state machine */
-	BFA_PPORT_SM_ENABLE = 3,	/*  enable port */
-	BFA_PPORT_SM_DISABLE = 4,	/*  disable port state machine */
-	BFA_PPORT_SM_FWRSP = 5,	/*  firmware enable/disable rsp */
-	BFA_PPORT_SM_LINKUP = 6,	/*  firmware linkup event */
-	BFA_PPORT_SM_LINKDOWN = 7,	/*  firmware linkup down */
-	BFA_PPORT_SM_QRESUME = 8,	/*  CQ space available */
-	BFA_PPORT_SM_HWFAIL = 9,	/*  IOC h/w failure */
+enum bfa_fcport_sm_event {
+	BFA_FCPORT_SM_START = 1,	/*  start port state machine */
+	BFA_FCPORT_SM_STOP = 2,	/*  stop port state machine */
+	BFA_FCPORT_SM_ENABLE = 3,	/*  enable port */
+	BFA_FCPORT_SM_DISABLE = 4,	/*  disable port state machine */
+	BFA_FCPORT_SM_FWRSP = 5,	/*  firmware enable/disable rsp */
+	BFA_FCPORT_SM_LINKUP = 6,	/*  firmware linkup event */
+	BFA_FCPORT_SM_LINKDOWN = 7,	/*  firmware linkup down */
+	BFA_FCPORT_SM_QRESUME = 8,	/*  CQ space available */
+	BFA_FCPORT_SM_HWFAIL = 9,	/*  IOC h/w failure */
 };
 
-static void     bfa_pport_sm_uninit(struct bfa_pport_s *pport,
-				    enum bfa_pport_sm_event event);
-static void     bfa_pport_sm_enabling_qwait(struct bfa_pport_s *pport,
-					    enum bfa_pport_sm_event event);
-static void     bfa_pport_sm_enabling(struct bfa_pport_s *pport,
-				      enum bfa_pport_sm_event event);
-static void     bfa_pport_sm_linkdown(struct bfa_pport_s *pport,
-				      enum bfa_pport_sm_event event);
-static void     bfa_pport_sm_linkup(struct bfa_pport_s *pport,
-				    enum bfa_pport_sm_event event);
-static void     bfa_pport_sm_disabling(struct bfa_pport_s *pport,
-				       enum bfa_pport_sm_event event);
-static void     bfa_pport_sm_disabling_qwait(struct bfa_pport_s *pport,
-					     enum bfa_pport_sm_event event);
-static void     bfa_pport_sm_disabled(struct bfa_pport_s *pport,
-				      enum bfa_pport_sm_event event);
-static void     bfa_pport_sm_stopped(struct bfa_pport_s *pport,
-				     enum bfa_pport_sm_event event);
-static void     bfa_pport_sm_iocdown(struct bfa_pport_s *pport,
-				     enum bfa_pport_sm_event event);
-static void     bfa_pport_sm_iocfail(struct bfa_pport_s *pport,
-				     enum bfa_pport_sm_event event);
+/**
+ * BFA port link notification state machine events
+ */
+
+enum bfa_fcport_ln_sm_event {
+	BFA_FCPORT_LN_SM_LINKUP         = 1,    /*  linkup event */
+	BFA_FCPORT_LN_SM_LINKDOWN       = 2,    /*  linkdown event */
+	BFA_FCPORT_LN_SM_NOTIFICATION   = 3     /*  done notification */
+};
+
+static void     bfa_fcport_sm_uninit(struct bfa_fcport_s *fcport,
+					enum bfa_fcport_sm_event event);
+static void     bfa_fcport_sm_enabling_qwait(struct bfa_fcport_s *fcport,
+						enum bfa_fcport_sm_event event);
+static void     bfa_fcport_sm_enabling(struct bfa_fcport_s *fcport,
+						enum bfa_fcport_sm_event event);
+static void     bfa_fcport_sm_linkdown(struct bfa_fcport_s *fcport,
+						enum bfa_fcport_sm_event event);
+static void     bfa_fcport_sm_linkup(struct bfa_fcport_s *fcport,
+						enum bfa_fcport_sm_event event);
+static void     bfa_fcport_sm_disabling(struct bfa_fcport_s *fcport,
+						enum bfa_fcport_sm_event event);
+static void     bfa_fcport_sm_disabling_qwait(struct bfa_fcport_s *fcport,
+						enum bfa_fcport_sm_event event);
+static void     bfa_fcport_sm_disabled(struct bfa_fcport_s *fcport,
+						enum bfa_fcport_sm_event event);
+static void     bfa_fcport_sm_stopped(struct bfa_fcport_s *fcport,
+					 enum bfa_fcport_sm_event event);
+static void     bfa_fcport_sm_iocdown(struct bfa_fcport_s *fcport,
+					 enum bfa_fcport_sm_event event);
+static void     bfa_fcport_sm_iocfail(struct bfa_fcport_s *fcport,
+					 enum bfa_fcport_sm_event event);
+
+static void     bfa_fcport_ln_sm_dn(struct bfa_fcport_ln_s *ln,
+					 enum bfa_fcport_ln_sm_event event);
+static void     bfa_fcport_ln_sm_dn_nf(struct bfa_fcport_ln_s *ln,
+					 enum bfa_fcport_ln_sm_event event);
+static void     bfa_fcport_ln_sm_dn_up_nf(struct bfa_fcport_ln_s *ln,
+					 enum bfa_fcport_ln_sm_event event);
+static void     bfa_fcport_ln_sm_up(struct bfa_fcport_ln_s *ln,
+					 enum bfa_fcport_ln_sm_event event);
+static void     bfa_fcport_ln_sm_up_nf(struct bfa_fcport_ln_s *ln,
+					 enum bfa_fcport_ln_sm_event event);
+static void     bfa_fcport_ln_sm_up_dn_nf(struct bfa_fcport_ln_s *ln,
+					 enum bfa_fcport_ln_sm_event event);
+static void     bfa_fcport_ln_sm_up_dn_up_nf(struct bfa_fcport_ln_s *ln,
+					 enum bfa_fcport_ln_sm_event event);
 
 static struct bfa_sm_table_s hal_pport_sm_table[] = {
-	{BFA_SM(bfa_pport_sm_uninit), BFA_PPORT_ST_UNINIT},
-	{BFA_SM(bfa_pport_sm_enabling_qwait), BFA_PPORT_ST_ENABLING_QWAIT},
-	{BFA_SM(bfa_pport_sm_enabling), BFA_PPORT_ST_ENABLING},
-	{BFA_SM(bfa_pport_sm_linkdown), BFA_PPORT_ST_LINKDOWN},
-	{BFA_SM(bfa_pport_sm_linkup), BFA_PPORT_ST_LINKUP},
-	{BFA_SM(bfa_pport_sm_disabling_qwait),
-	 BFA_PPORT_ST_DISABLING_QWAIT},
-	{BFA_SM(bfa_pport_sm_disabling), BFA_PPORT_ST_DISABLING},
-	{BFA_SM(bfa_pport_sm_disabled), BFA_PPORT_ST_DISABLED},
-	{BFA_SM(bfa_pport_sm_stopped), BFA_PPORT_ST_STOPPED},
-	{BFA_SM(bfa_pport_sm_iocdown), BFA_PPORT_ST_IOCDOWN},
-	{BFA_SM(bfa_pport_sm_iocfail), BFA_PPORT_ST_IOCDOWN},
+	{BFA_SM(bfa_fcport_sm_uninit), BFA_PPORT_ST_UNINIT},
+	{BFA_SM(bfa_fcport_sm_enabling_qwait), BFA_PPORT_ST_ENABLING_QWAIT},
+	{BFA_SM(bfa_fcport_sm_enabling), BFA_PPORT_ST_ENABLING},
+	{BFA_SM(bfa_fcport_sm_linkdown), BFA_PPORT_ST_LINKDOWN},
+	{BFA_SM(bfa_fcport_sm_linkup), BFA_PPORT_ST_LINKUP},
+	{BFA_SM(bfa_fcport_sm_disabling_qwait), BFA_PPORT_ST_DISABLING_QWAIT},
+	{BFA_SM(bfa_fcport_sm_disabling), BFA_PPORT_ST_DISABLING},
+	{BFA_SM(bfa_fcport_sm_disabled), BFA_PPORT_ST_DISABLED},
+	{BFA_SM(bfa_fcport_sm_stopped), BFA_PPORT_ST_STOPPED},
+	{BFA_SM(bfa_fcport_sm_iocdown), BFA_PPORT_ST_IOCDOWN},
+	{BFA_SM(bfa_fcport_sm_iocfail), BFA_PPORT_ST_IOCDOWN},
 };
 
 static void
-bfa_pport_aen_post(struct bfa_pport_s *pport, enum bfa_port_aen_event event)
+bfa_fcport_aen_post(struct bfa_fcport_s *fcport, enum bfa_port_aen_event event)
 {
 	union bfa_aen_data_u aen_data;
-	struct bfa_log_mod_s *logmod = pport->bfa->logm;
-	wwn_t           pwwn = pport->pwwn;
+	struct bfa_log_mod_s *logmod = fcport->bfa->logm;
+	wwn_t           pwwn = fcport->pwwn;
 	char            pwwn_ptr[BFA_STRING_32];
-	struct bfa_ioc_attr_s ioc_attr;
 
+	memset(&aen_data, 0, sizeof(aen_data));
 	wwn2str(pwwn_ptr, pwwn);
-	switch (event) {
-	case BFA_PORT_AEN_ONLINE:
-		bfa_log(logmod, BFA_AEN_PORT_ONLINE, pwwn_ptr);
-		break;
-	case BFA_PORT_AEN_OFFLINE:
-		bfa_log(logmod, BFA_AEN_PORT_OFFLINE, pwwn_ptr);
-		break;
-	case BFA_PORT_AEN_ENABLE:
-		bfa_log(logmod, BFA_AEN_PORT_ENABLE, pwwn_ptr);
-		break;
-	case BFA_PORT_AEN_DISABLE:
-		bfa_log(logmod, BFA_AEN_PORT_DISABLE, pwwn_ptr);
-		break;
-	case BFA_PORT_AEN_DISCONNECT:
-		bfa_log(logmod, BFA_AEN_PORT_DISCONNECT, pwwn_ptr);
-		break;
-	case BFA_PORT_AEN_QOS_NEG:
-		bfa_log(logmod, BFA_AEN_PORT_QOS_NEG, pwwn_ptr);
-		break;
-	default:
-		break;
-	}
+	bfa_log(logmod, BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, event), pwwn_ptr);
 
-	bfa_ioc_get_attr(&pport->bfa->ioc, &ioc_attr);
-	aen_data.port.ioc_type = ioc_attr.ioc_type;
+	aen_data.port.ioc_type = bfa_get_type(fcport->bfa);
 	aen_data.port.pwwn = pwwn;
 }
 
 static void
-bfa_pport_sm_uninit(struct bfa_pport_s *pport, enum bfa_pport_sm_event event)
+bfa_fcport_sm_uninit(struct bfa_fcport_s *fcport,
+			enum bfa_fcport_sm_event event)
 {
-	bfa_trc(pport->bfa, event);
+	bfa_trc(fcport->bfa, event);
 
 	switch (event) {
-	case BFA_PPORT_SM_START:
+	case BFA_FCPORT_SM_START:
 		/**
 		 * Start event after IOC is configured and BFA is started.
 		 */
-		if (bfa_pport_send_enable(pport))
-			bfa_sm_set_state(pport, bfa_pport_sm_enabling);
+		if (bfa_fcport_send_enable(fcport))
+			bfa_sm_set_state(fcport, bfa_fcport_sm_enabling);
 		else
-			bfa_sm_set_state(pport, bfa_pport_sm_enabling_qwait);
+			bfa_sm_set_state(fcport, bfa_fcport_sm_enabling_qwait);
 		break;
 
-	case BFA_PPORT_SM_ENABLE:
+	case BFA_FCPORT_SM_ENABLE:
 		/**
 		 * Port is persistently configured to be in enabled state. Do
 		 * not change state. Port enabling is done when START event is
@@ -177,389 +173,412 @@ bfa_pport_sm_uninit(struct bfa_pport_s *pport, enum bfa_pport_sm_event event)
 		 */
 		break;
 
-	case BFA_PPORT_SM_DISABLE:
+	case BFA_FCPORT_SM_DISABLE:
 		/**
 		 * If a port is persistently configured to be disabled, the
 		 * first event will a port disable request.
 		 */
-		bfa_sm_set_state(pport, bfa_pport_sm_disabled);
+		bfa_sm_set_state(fcport, bfa_fcport_sm_disabled);
 		break;
 
-	case BFA_PPORT_SM_HWFAIL:
-		bfa_sm_set_state(pport, bfa_pport_sm_iocdown);
+	case BFA_FCPORT_SM_HWFAIL:
+		bfa_sm_set_state(fcport, bfa_fcport_sm_iocdown);
 		break;
 
 	default:
-		bfa_sm_fault(pport->bfa, event);
+		bfa_sm_fault(fcport->bfa, event);
 	}
 }
 
 static void
-bfa_pport_sm_enabling_qwait(struct bfa_pport_s *pport,
-			    enum bfa_pport_sm_event event)
+bfa_fcport_sm_enabling_qwait(struct bfa_fcport_s *fcport,
+			    enum bfa_fcport_sm_event event)
 {
-	bfa_trc(pport->bfa, event);
+	bfa_trc(fcport->bfa, event);
 
 	switch (event) {
-	case BFA_PPORT_SM_QRESUME:
-		bfa_sm_set_state(pport, bfa_pport_sm_enabling);
-		bfa_pport_send_enable(pport);
+	case BFA_FCPORT_SM_QRESUME:
+		bfa_sm_set_state(fcport, bfa_fcport_sm_enabling);
+		bfa_fcport_send_enable(fcport);
 		break;
 
-	case BFA_PPORT_SM_STOP:
-		bfa_reqq_wcancel(&pport->reqq_wait);
-		bfa_sm_set_state(pport, bfa_pport_sm_stopped);
+	case BFA_FCPORT_SM_STOP:
+		bfa_reqq_wcancel(&fcport->reqq_wait);
+		bfa_sm_set_state(fcport, bfa_fcport_sm_stopped);
 		break;
 
-	case BFA_PPORT_SM_ENABLE:
+	case BFA_FCPORT_SM_ENABLE:
 		/**
 		 * Already enable is in progress.
 		 */
 		break;
 
-	case BFA_PPORT_SM_DISABLE:
+	case BFA_FCPORT_SM_DISABLE:
 		/**
 		 * Just send disable request to firmware when room becomes
 		 * available in request queue.
 		 */
-		bfa_sm_set_state(pport, bfa_pport_sm_disabled);
-		bfa_reqq_wcancel(&pport->reqq_wait);
-		bfa_plog_str(pport->bfa->plog, BFA_PL_MID_HAL,
+		bfa_sm_set_state(fcport, bfa_fcport_sm_disabled);
+		bfa_reqq_wcancel(&fcport->reqq_wait);
+		bfa_plog_str(fcport->bfa->plog, BFA_PL_MID_HAL,
 			     BFA_PL_EID_PORT_DISABLE, 0, "Port Disable");
-		bfa_pport_aen_post(pport, BFA_PORT_AEN_DISABLE);
+		bfa_fcport_aen_post(fcport, BFA_PORT_AEN_DISABLE);
 		break;
 
-	case BFA_PPORT_SM_LINKUP:
-	case BFA_PPORT_SM_LINKDOWN:
+	case BFA_FCPORT_SM_LINKUP:
+	case BFA_FCPORT_SM_LINKDOWN:
 		/**
 		 * Possible to get link events when doing back-to-back
 		 * enable/disables.
 		 */
 		break;
 
-	case BFA_PPORT_SM_HWFAIL:
-		bfa_reqq_wcancel(&pport->reqq_wait);
-		bfa_sm_set_state(pport, bfa_pport_sm_iocdown);
+	case BFA_FCPORT_SM_HWFAIL:
+		bfa_reqq_wcancel(&fcport->reqq_wait);
+		bfa_sm_set_state(fcport, bfa_fcport_sm_iocdown);
 		break;
 
 	default:
-		bfa_sm_fault(pport->bfa, event);
+		bfa_sm_fault(fcport->bfa, event);
 	}
 }
 
 static void
-bfa_pport_sm_enabling(struct bfa_pport_s *pport, enum bfa_pport_sm_event event)
+bfa_fcport_sm_enabling(struct bfa_fcport_s *fcport,
+		enum bfa_fcport_sm_event event)
 {
-	bfa_trc(pport->bfa, event);
+	bfa_trc(fcport->bfa, event);
 
 	switch (event) {
-	case BFA_PPORT_SM_FWRSP:
-	case BFA_PPORT_SM_LINKDOWN:
-		bfa_sm_set_state(pport, bfa_pport_sm_linkdown);
+	case BFA_FCPORT_SM_FWRSP:
+	case BFA_FCPORT_SM_LINKDOWN:
+		bfa_sm_set_state(fcport, bfa_fcport_sm_linkdown);
 		break;
 
-	case BFA_PPORT_SM_LINKUP:
-		bfa_pport_update_linkinfo(pport);
-		bfa_sm_set_state(pport, bfa_pport_sm_linkup);
+	case BFA_FCPORT_SM_LINKUP:
+		bfa_fcport_update_linkinfo(fcport);
+		bfa_sm_set_state(fcport, bfa_fcport_sm_linkup);
 
-		bfa_assert(pport->event_cbfn);
-		bfa_pport_callback(pport, BFA_PPORT_LINKUP);
+		bfa_assert(fcport->event_cbfn);
+		bfa_fcport_callback(fcport, BFA_PPORT_LINKUP);
 		break;
 
-	case BFA_PPORT_SM_ENABLE:
+	case BFA_FCPORT_SM_ENABLE:
 		/**
 		 * Already being enabled.
 		 */
 		break;
 
-	case BFA_PPORT_SM_DISABLE:
-		if (bfa_pport_send_disable(pport))
-			bfa_sm_set_state(pport, bfa_pport_sm_disabling);
+	case BFA_FCPORT_SM_DISABLE:
+		if (bfa_fcport_send_disable(fcport))
+			bfa_sm_set_state(fcport, bfa_fcport_sm_disabling);
 		else
-			bfa_sm_set_state(pport, bfa_pport_sm_disabling_qwait);
+			bfa_sm_set_state(fcport, bfa_fcport_sm_disabling_qwait);
 
-		bfa_plog_str(pport->bfa->plog, BFA_PL_MID_HAL,
+		bfa_plog_str(fcport->bfa->plog, BFA_PL_MID_HAL,
 			     BFA_PL_EID_PORT_DISABLE, 0, "Port Disable");
-		bfa_pport_aen_post(pport, BFA_PORT_AEN_DISABLE);
+		bfa_fcport_aen_post(fcport, BFA_PORT_AEN_DISABLE);
 		break;
 
-	case BFA_PPORT_SM_STOP:
-		bfa_sm_set_state(pport, bfa_pport_sm_stopped);
+	case BFA_FCPORT_SM_STOP:
+		bfa_sm_set_state(fcport, bfa_fcport_sm_stopped);
 		break;
 
-	case BFA_PPORT_SM_HWFAIL:
-		bfa_sm_set_state(pport, bfa_pport_sm_iocdown);
+	case BFA_FCPORT_SM_HWFAIL:
+		bfa_sm_set_state(fcport, bfa_fcport_sm_iocdown);
 		break;
 
 	default:
-		bfa_sm_fault(pport->bfa, event);
+		bfa_sm_fault(fcport->bfa, event);
 	}
 }
 
 static void
-bfa_pport_sm_linkdown(struct bfa_pport_s *pport, enum bfa_pport_sm_event event)
+bfa_fcport_sm_linkdown(struct bfa_fcport_s *fcport,
+			enum bfa_fcport_sm_event event)
 {
-	bfa_trc(pport->bfa, event);
+	struct bfi_fcport_event_s *pevent = fcport->event_arg.i2hmsg.event;
+	bfa_trc(fcport->bfa, event);
 
 	switch (event) {
-	case BFA_PPORT_SM_LINKUP:
-		bfa_pport_update_linkinfo(pport);
-		bfa_sm_set_state(pport, bfa_pport_sm_linkup);
-		bfa_assert(pport->event_cbfn);
-		bfa_plog_str(pport->bfa->plog, BFA_PL_MID_HAL,
+	case BFA_FCPORT_SM_LINKUP:
+		bfa_fcport_update_linkinfo(fcport);
+		bfa_sm_set_state(fcport, bfa_fcport_sm_linkup);
+		bfa_assert(fcport->event_cbfn);
+		bfa_plog_str(fcport->bfa->plog, BFA_PL_MID_HAL,
 			     BFA_PL_EID_PORT_ST_CHANGE, 0, "Port Linkup");
-		bfa_pport_callback(pport, BFA_PPORT_LINKUP);
-		bfa_pport_aen_post(pport, BFA_PORT_AEN_ONLINE);
+
+		if (!bfa_ioc_get_fcmode(&fcport->bfa->ioc)) {
+
+			bfa_trc(fcport->bfa, pevent->link_state.fcf.fipenabled);
+			bfa_trc(fcport->bfa, pevent->link_state.fcf.fipfailed);
+
+			if (pevent->link_state.fcf.fipfailed)
+				bfa_plog_str(fcport->bfa->plog, BFA_PL_MID_HAL,
+					BFA_PL_EID_FIP_FCF_DISC, 0,
+					"FIP FCF Discovery Failed");
+			else
+				bfa_plog_str(fcport->bfa->plog, BFA_PL_MID_HAL,
+					BFA_PL_EID_FIP_FCF_DISC, 0,
+					"FIP FCF Discovered");
+		}
+
+		bfa_fcport_callback(fcport, BFA_PPORT_LINKUP);
+		bfa_fcport_aen_post(fcport, BFA_PORT_AEN_ONLINE);
 		/**
 		 * If QoS is enabled and it is not online,
 		 * Send a separate event.
 		 */
-		if ((pport->cfg.qos_enabled)
-		    && (bfa_os_ntohl(pport->qos_attr.state) != BFA_QOS_ONLINE))
-			bfa_pport_aen_post(pport, BFA_PORT_AEN_QOS_NEG);
+		if ((fcport->cfg.qos_enabled)
+		    && (bfa_os_ntohl(fcport->qos_attr.state) != BFA_QOS_ONLINE))
+			bfa_fcport_aen_post(fcport, BFA_PORT_AEN_QOS_NEG);
 
 		break;
 
-	case BFA_PPORT_SM_LINKDOWN:
+	case BFA_FCPORT_SM_LINKDOWN:
 		/**
 		 * Possible to get link down event.
 		 */
 		break;
 
-	case BFA_PPORT_SM_ENABLE:
+	case BFA_FCPORT_SM_ENABLE:
 		/**
 		 * Already enabled.
 		 */
 		break;
 
-	case BFA_PPORT_SM_DISABLE:
-		if (bfa_pport_send_disable(pport))
-			bfa_sm_set_state(pport, bfa_pport_sm_disabling);
+	case BFA_FCPORT_SM_DISABLE:
+		if (bfa_fcport_send_disable(fcport))
+			bfa_sm_set_state(fcport, bfa_fcport_sm_disabling);
 		else
-			bfa_sm_set_state(pport, bfa_pport_sm_disabling_qwait);
+			bfa_sm_set_state(fcport, bfa_fcport_sm_disabling_qwait);
 
-		bfa_plog_str(pport->bfa->plog, BFA_PL_MID_HAL,
+		bfa_plog_str(fcport->bfa->plog, BFA_PL_MID_HAL,
 			     BFA_PL_EID_PORT_DISABLE, 0, "Port Disable");
-		bfa_pport_aen_post(pport, BFA_PORT_AEN_DISABLE);
+		bfa_fcport_aen_post(fcport, BFA_PORT_AEN_DISABLE);
 		break;
 
-	case BFA_PPORT_SM_STOP:
-		bfa_sm_set_state(pport, bfa_pport_sm_stopped);
+	case BFA_FCPORT_SM_STOP:
+		bfa_sm_set_state(fcport, bfa_fcport_sm_stopped);
 		break;
 
-	case BFA_PPORT_SM_HWFAIL:
-		bfa_sm_set_state(pport, bfa_pport_sm_iocdown);
+	case BFA_FCPORT_SM_HWFAIL:
+		bfa_sm_set_state(fcport, bfa_fcport_sm_iocdown);
 		break;
 
 	default:
-		bfa_sm_fault(pport->bfa, event);
+		bfa_sm_fault(fcport->bfa, event);
 	}
 }
 
 static void
-bfa_pport_sm_linkup(struct bfa_pport_s *pport, enum bfa_pport_sm_event event)
+bfa_fcport_sm_linkup(struct bfa_fcport_s *fcport,
+			enum bfa_fcport_sm_event event)
 {
-	bfa_trc(pport->bfa, event);
+	bfa_trc(fcport->bfa, event);
 
 	switch (event) {
-	case BFA_PPORT_SM_ENABLE:
+	case BFA_FCPORT_SM_ENABLE:
 		/**
 		 * Already enabled.
 		 */
 		break;
 
-	case BFA_PPORT_SM_DISABLE:
-		if (bfa_pport_send_disable(pport))
-			bfa_sm_set_state(pport, bfa_pport_sm_disabling);
+	case BFA_FCPORT_SM_DISABLE:
+		if (bfa_fcport_send_disable(fcport))
+			bfa_sm_set_state(fcport, bfa_fcport_sm_disabling);
 		else
-			bfa_sm_set_state(pport, bfa_pport_sm_disabling_qwait);
+			bfa_sm_set_state(fcport, bfa_fcport_sm_disabling_qwait);
 
-		bfa_pport_reset_linkinfo(pport);
-		bfa_pport_callback(pport, BFA_PPORT_LINKDOWN);
-		bfa_plog_str(pport->bfa->plog, BFA_PL_MID_HAL,
+		bfa_fcport_reset_linkinfo(fcport);
+		bfa_fcport_callback(fcport, BFA_PPORT_LINKDOWN);
+		bfa_plog_str(fcport->bfa->plog, BFA_PL_MID_HAL,
 			     BFA_PL_EID_PORT_DISABLE, 0, "Port Disable");
-		bfa_pport_aen_post(pport, BFA_PORT_AEN_OFFLINE);
-		bfa_pport_aen_post(pport, BFA_PORT_AEN_DISABLE);
+		bfa_fcport_aen_post(fcport, BFA_PORT_AEN_OFFLINE);
+		bfa_fcport_aen_post(fcport, BFA_PORT_AEN_DISABLE);
 		break;
 
-	case BFA_PPORT_SM_LINKDOWN:
-		bfa_sm_set_state(pport, bfa_pport_sm_linkdown);
-		bfa_pport_reset_linkinfo(pport);
-		bfa_pport_callback(pport, BFA_PPORT_LINKDOWN);
-		bfa_plog_str(pport->bfa->plog, BFA_PL_MID_HAL,
+	case BFA_FCPORT_SM_LINKDOWN:
+		bfa_sm_set_state(fcport, bfa_fcport_sm_linkdown);
+		bfa_fcport_reset_linkinfo(fcport);
+		bfa_fcport_callback(fcport, BFA_PPORT_LINKDOWN);
+		bfa_plog_str(fcport->bfa->plog, BFA_PL_MID_HAL,
 			     BFA_PL_EID_PORT_ST_CHANGE, 0, "Port Linkdown");
-		if (BFA_PORT_IS_DISABLED(pport->bfa))
-			bfa_pport_aen_post(pport, BFA_PORT_AEN_OFFLINE);
+		if (BFA_PORT_IS_DISABLED(fcport->bfa))
+			bfa_fcport_aen_post(fcport, BFA_PORT_AEN_OFFLINE);
 		else
-			bfa_pport_aen_post(pport, BFA_PORT_AEN_DISCONNECT);
+			bfa_fcport_aen_post(fcport, BFA_PORT_AEN_DISCONNECT);
 		break;
 
-	case BFA_PPORT_SM_STOP:
-		bfa_sm_set_state(pport, bfa_pport_sm_stopped);
-		bfa_pport_reset_linkinfo(pport);
-		if (BFA_PORT_IS_DISABLED(pport->bfa))
-			bfa_pport_aen_post(pport, BFA_PORT_AEN_OFFLINE);
+	case BFA_FCPORT_SM_STOP:
+		bfa_sm_set_state(fcport, bfa_fcport_sm_stopped);
+		bfa_fcport_reset_linkinfo(fcport);
+		if (BFA_PORT_IS_DISABLED(fcport->bfa))
+			bfa_fcport_aen_post(fcport, BFA_PORT_AEN_OFFLINE);
 		else
-			bfa_pport_aen_post(pport, BFA_PORT_AEN_DISCONNECT);
+			bfa_fcport_aen_post(fcport, BFA_PORT_AEN_DISCONNECT);
 		break;
 
-	case BFA_PPORT_SM_HWFAIL:
-		bfa_sm_set_state(pport, bfa_pport_sm_iocdown);
-		bfa_pport_reset_linkinfo(pport);
-		bfa_pport_callback(pport, BFA_PPORT_LINKDOWN);
-		if (BFA_PORT_IS_DISABLED(pport->bfa))
-			bfa_pport_aen_post(pport, BFA_PORT_AEN_OFFLINE);
+	case BFA_FCPORT_SM_HWFAIL:
+		bfa_sm_set_state(fcport, bfa_fcport_sm_iocdown);
+		bfa_fcport_reset_linkinfo(fcport);
+		bfa_fcport_callback(fcport, BFA_PPORT_LINKDOWN);
+		if (BFA_PORT_IS_DISABLED(fcport->bfa))
+			bfa_fcport_aen_post(fcport, BFA_PORT_AEN_OFFLINE);
 		else
-			bfa_pport_aen_post(pport, BFA_PORT_AEN_DISCONNECT);
+			bfa_fcport_aen_post(fcport, BFA_PORT_AEN_DISCONNECT);
 		break;
 
 	default:
-		bfa_sm_fault(pport->bfa, event);
+		bfa_sm_fault(fcport->bfa, event);
 	}
 }
 
 static void
-bfa_pport_sm_disabling_qwait(struct bfa_pport_s *pport,
-			     enum bfa_pport_sm_event event)
+bfa_fcport_sm_disabling_qwait(struct bfa_fcport_s *fcport,
+			     enum bfa_fcport_sm_event event)
 {
-	bfa_trc(pport->bfa, event);
+	bfa_trc(fcport->bfa, event);
 
 	switch (event) {
-	case BFA_PPORT_SM_QRESUME:
-		bfa_sm_set_state(pport, bfa_pport_sm_disabling);
-		bfa_pport_send_disable(pport);
+	case BFA_FCPORT_SM_QRESUME:
+		bfa_sm_set_state(fcport, bfa_fcport_sm_disabling);
+		bfa_fcport_send_disable(fcport);
 		break;
 
-	case BFA_PPORT_SM_STOP:
-		bfa_sm_set_state(pport, bfa_pport_sm_stopped);
-		bfa_reqq_wcancel(&pport->reqq_wait);
+	case BFA_FCPORT_SM_STOP:
+		bfa_sm_set_state(fcport, bfa_fcport_sm_stopped);
+		bfa_reqq_wcancel(&fcport->reqq_wait);
 		break;
 
-	case BFA_PPORT_SM_DISABLE:
+	case BFA_FCPORT_SM_DISABLE:
 		/**
 		 * Already being disabled.
 		 */
 		break;
 
-	case BFA_PPORT_SM_LINKUP:
-	case BFA_PPORT_SM_LINKDOWN:
+	case BFA_FCPORT_SM_LINKUP:
+	case BFA_FCPORT_SM_LINKDOWN:
 		/**
 		 * Possible to get link events when doing back-to-back
 		 * enable/disables.
 		 */
 		break;
 
-	case BFA_PPORT_SM_HWFAIL:
-		bfa_sm_set_state(pport, bfa_pport_sm_iocfail);
-		bfa_reqq_wcancel(&pport->reqq_wait);
+	case BFA_FCPORT_SM_HWFAIL:
+		bfa_sm_set_state(fcport, bfa_fcport_sm_iocfail);
+		bfa_reqq_wcancel(&fcport->reqq_wait);
 		break;
 
 	default:
-		bfa_sm_fault(pport->bfa, event);
+		bfa_sm_fault(fcport->bfa, event);
 	}
 }
 
 static void
-bfa_pport_sm_disabling(struct bfa_pport_s *pport, enum bfa_pport_sm_event event)
+bfa_fcport_sm_disabling(struct bfa_fcport_s *fcport,
+			enum bfa_fcport_sm_event event)
 {
-	bfa_trc(pport->bfa, event);
+	bfa_trc(fcport->bfa, event);
 
 	switch (event) {
-	case BFA_PPORT_SM_FWRSP:
-		bfa_sm_set_state(pport, bfa_pport_sm_disabled);
+	case BFA_FCPORT_SM_FWRSP:
+		bfa_sm_set_state(fcport, bfa_fcport_sm_disabled);
 		break;
 
-	case BFA_PPORT_SM_DISABLE:
+	case BFA_FCPORT_SM_DISABLE:
 		/**
 		 * Already being disabled.
 		 */
 		break;
 
-	case BFA_PPORT_SM_ENABLE:
-		if (bfa_pport_send_enable(pport))
-			bfa_sm_set_state(pport, bfa_pport_sm_enabling);
+	case BFA_FCPORT_SM_ENABLE:
+		if (bfa_fcport_send_enable(fcport))
+			bfa_sm_set_state(fcport, bfa_fcport_sm_enabling);
 		else
-			bfa_sm_set_state(pport, bfa_pport_sm_enabling_qwait);
+			bfa_sm_set_state(fcport, bfa_fcport_sm_enabling_qwait);
 
-		bfa_plog_str(pport->bfa->plog, BFA_PL_MID_HAL,
+		bfa_plog_str(fcport->bfa->plog, BFA_PL_MID_HAL,
 			     BFA_PL_EID_PORT_ENABLE, 0, "Port Enable");
-		bfa_pport_aen_post(pport, BFA_PORT_AEN_ENABLE);
+		bfa_fcport_aen_post(fcport, BFA_PORT_AEN_ENABLE);
 		break;
 
-	case BFA_PPORT_SM_STOP:
-		bfa_sm_set_state(pport, bfa_pport_sm_stopped);
+	case BFA_FCPORT_SM_STOP:
+		bfa_sm_set_state(fcport, bfa_fcport_sm_stopped);
 		break;
 
-	case BFA_PPORT_SM_LINKUP:
-	case BFA_PPORT_SM_LINKDOWN:
+	case BFA_FCPORT_SM_LINKUP:
+	case BFA_FCPORT_SM_LINKDOWN:
 		/**
 		 * Possible to get link events when doing back-to-back
 		 * enable/disables.
 		 */
 		break;
 
-	case BFA_PPORT_SM_HWFAIL:
-		bfa_sm_set_state(pport, bfa_pport_sm_iocfail);
+	case BFA_FCPORT_SM_HWFAIL:
+		bfa_sm_set_state(fcport, bfa_fcport_sm_iocfail);
 		break;
 
 	default:
-		bfa_sm_fault(pport->bfa, event);
+		bfa_sm_fault(fcport->bfa, event);
 	}
 }
 
 static void
-bfa_pport_sm_disabled(struct bfa_pport_s *pport, enum bfa_pport_sm_event event)
+bfa_fcport_sm_disabled(struct bfa_fcport_s *fcport,
+			enum bfa_fcport_sm_event event)
 {
-	bfa_trc(pport->bfa, event);
+	bfa_trc(fcport->bfa, event);
 
 	switch (event) {
-	case BFA_PPORT_SM_START:
+	case BFA_FCPORT_SM_START:
 		/**
 		 * Ignore start event for a port that is disabled.
 		 */
 		break;
 
-	case BFA_PPORT_SM_STOP:
-		bfa_sm_set_state(pport, bfa_pport_sm_stopped);
+	case BFA_FCPORT_SM_STOP:
+		bfa_sm_set_state(fcport, bfa_fcport_sm_stopped);
 		break;
 
-	case BFA_PPORT_SM_ENABLE:
-		if (bfa_pport_send_enable(pport))
-			bfa_sm_set_state(pport, bfa_pport_sm_enabling);
+	case BFA_FCPORT_SM_ENABLE:
+		if (bfa_fcport_send_enable(fcport))
+			bfa_sm_set_state(fcport, bfa_fcport_sm_enabling);
 		else
-			bfa_sm_set_state(pport, bfa_pport_sm_enabling_qwait);
+			bfa_sm_set_state(fcport, bfa_fcport_sm_enabling_qwait);
 
-		bfa_plog_str(pport->bfa->plog, BFA_PL_MID_HAL,
+		bfa_plog_str(fcport->bfa->plog, BFA_PL_MID_HAL,
 			     BFA_PL_EID_PORT_ENABLE, 0, "Port Enable");
-		bfa_pport_aen_post(pport, BFA_PORT_AEN_ENABLE);
+		bfa_fcport_aen_post(fcport, BFA_PORT_AEN_ENABLE);
 		break;
 
-	case BFA_PPORT_SM_DISABLE:
+	case BFA_FCPORT_SM_DISABLE:
 		/**
 		 * Already disabled.
 		 */
 		break;
 
-	case BFA_PPORT_SM_HWFAIL:
-		bfa_sm_set_state(pport, bfa_pport_sm_iocfail);
+	case BFA_FCPORT_SM_HWFAIL:
+		bfa_sm_set_state(fcport, bfa_fcport_sm_iocfail);
 		break;
 
 	default:
-		bfa_sm_fault(pport->bfa, event);
+		bfa_sm_fault(fcport->bfa, event);
 	}
 }
 
 static void
-bfa_pport_sm_stopped(struct bfa_pport_s *pport, enum bfa_pport_sm_event event)
+bfa_fcport_sm_stopped(struct bfa_fcport_s *fcport,
+			enum bfa_fcport_sm_event event)
 {
-	bfa_trc(pport->bfa, event);
+	bfa_trc(fcport->bfa, event);
 
 	switch (event) {
-	case BFA_PPORT_SM_START:
-		if (bfa_pport_send_enable(pport))
-			bfa_sm_set_state(pport, bfa_pport_sm_enabling);
+	case BFA_FCPORT_SM_START:
+		if (bfa_fcport_send_enable(fcport))
+			bfa_sm_set_state(fcport, bfa_fcport_sm_enabling);
 		else
-			bfa_sm_set_state(pport, bfa_pport_sm_enabling_qwait);
+			bfa_sm_set_state(fcport, bfa_fcport_sm_enabling_qwait);
 		break;
 
 	default:
@@ -574,16 +593,17 @@ bfa_pport_sm_stopped(struct bfa_pport_s *pport, enum bfa_pport_sm_event event)
  * Port is enabled. IOC is down/failed.
  */
 static void
-bfa_pport_sm_iocdown(struct bfa_pport_s *pport, enum bfa_pport_sm_event event)
+bfa_fcport_sm_iocdown(struct bfa_fcport_s *fcport,
+			enum bfa_fcport_sm_event event)
 {
-	bfa_trc(pport->bfa, event);
+	bfa_trc(fcport->bfa, event);
 
 	switch (event) {
-	case BFA_PPORT_SM_START:
-		if (bfa_pport_send_enable(pport))
-			bfa_sm_set_state(pport, bfa_pport_sm_enabling);
+	case BFA_FCPORT_SM_START:
+		if (bfa_fcport_send_enable(fcport))
+			bfa_sm_set_state(fcport, bfa_fcport_sm_enabling);
 		else
-			bfa_sm_set_state(pport, bfa_pport_sm_enabling_qwait);
+			bfa_sm_set_state(fcport, bfa_fcport_sm_enabling_qwait);
 		break;
 
 	default:
@@ -598,17 +618,18 @@ bfa_pport_sm_iocdown(struct bfa_pport_s *pport, enum bfa_pport_sm_event event)
  * Port is disabled. IOC is down/failed.
  */
 static void
-bfa_pport_sm_iocfail(struct bfa_pport_s *pport, enum bfa_pport_sm_event event)
+bfa_fcport_sm_iocfail(struct bfa_fcport_s *fcport,
+			enum bfa_fcport_sm_event event)
 {
-	bfa_trc(pport->bfa, event);
+	bfa_trc(fcport->bfa, event);
 
 	switch (event) {
-	case BFA_PPORT_SM_START:
-		bfa_sm_set_state(pport, bfa_pport_sm_disabled);
+	case BFA_FCPORT_SM_START:
+		bfa_sm_set_state(fcport, bfa_fcport_sm_disabled);
 		break;
 
-	case BFA_PPORT_SM_ENABLE:
-		bfa_sm_set_state(pport, bfa_pport_sm_iocdown);
+	case BFA_FCPORT_SM_ENABLE:
+		bfa_sm_set_state(fcport, bfa_fcport_sm_iocdown);
 		break;
 
 	default:
@@ -619,41 +640,226 @@ bfa_pport_sm_iocfail(struct bfa_pport_s *pport, enum bfa_pport_sm_event event)
 	}
 }
 
+/**
+ * Link state is down
+ */
+static void
+bfa_fcport_ln_sm_dn(struct bfa_fcport_ln_s *ln,
+		enum bfa_fcport_ln_sm_event event)
+{
+	bfa_trc(ln->fcport->bfa, event);
+
+	switch (event) {
+	case BFA_FCPORT_LN_SM_LINKUP:
+		bfa_sm_set_state(ln, bfa_fcport_ln_sm_up_nf);
+		bfa_fcport_queue_cb(ln, BFA_PPORT_LINKUP);
+		break;
+
+	default:
+		bfa_sm_fault(ln->fcport->bfa, event);
+	}
+}
+
+/**
+ * Link state is waiting for down notification
+ */
+static void
+bfa_fcport_ln_sm_dn_nf(struct bfa_fcport_ln_s *ln,
+		enum bfa_fcport_ln_sm_event event)
+{
+	bfa_trc(ln->fcport->bfa, event);
+
+	switch (event) {
+	case BFA_FCPORT_LN_SM_LINKUP:
+		bfa_sm_set_state(ln, bfa_fcport_ln_sm_dn_up_nf);
+		break;
+
+	case BFA_FCPORT_LN_SM_NOTIFICATION:
+		bfa_sm_set_state(ln, bfa_fcport_ln_sm_dn);
+		break;
+
+	default:
+		bfa_sm_fault(ln->fcport->bfa, event);
+	}
+}
+
+/**
+ * Link state is waiting for down notification and there is a pending up
+ */
+static void
+bfa_fcport_ln_sm_dn_up_nf(struct bfa_fcport_ln_s *ln,
+		enum bfa_fcport_ln_sm_event event)
+{
+	bfa_trc(ln->fcport->bfa, event);
+
+	switch (event) {
+	case BFA_FCPORT_LN_SM_LINKDOWN:
+		bfa_sm_set_state(ln, bfa_fcport_ln_sm_dn_nf);
+		break;
+
+	case BFA_FCPORT_LN_SM_NOTIFICATION:
+		bfa_sm_set_state(ln, bfa_fcport_ln_sm_up_nf);
+		bfa_fcport_queue_cb(ln, BFA_PPORT_LINKUP);
+		break;
+
+	default:
+		bfa_sm_fault(ln->fcport->bfa, event);
+	}
+}
+
+/**
+ * Link state is up
+ */
+static void
+bfa_fcport_ln_sm_up(struct bfa_fcport_ln_s *ln,
+		enum bfa_fcport_ln_sm_event event)
+{
+	bfa_trc(ln->fcport->bfa, event);
+
+	switch (event) {
+	case BFA_FCPORT_LN_SM_LINKDOWN:
+		bfa_sm_set_state(ln, bfa_fcport_ln_sm_dn_nf);
+		bfa_fcport_queue_cb(ln, BFA_PPORT_LINKDOWN);
+		break;
 
+	default:
+		bfa_sm_fault(ln->fcport->bfa, event);
+	}
+}
+
+/**
+ * Link state is waiting for up notification
+ */
+static void
+bfa_fcport_ln_sm_up_nf(struct bfa_fcport_ln_s *ln,
+		enum bfa_fcport_ln_sm_event event)
+{
+	bfa_trc(ln->fcport->bfa, event);
+
+	switch (event) {
+	case BFA_FCPORT_LN_SM_LINKDOWN:
+		bfa_sm_set_state(ln, bfa_fcport_ln_sm_up_dn_nf);
+		break;
+
+	case BFA_FCPORT_LN_SM_NOTIFICATION:
+		bfa_sm_set_state(ln, bfa_fcport_ln_sm_up);
+		break;
+
+	default:
+		bfa_sm_fault(ln->fcport->bfa, event);
+	}
+}
+
+/**
+ * Link state is waiting for up notification and there is a pending down
+ */
+static void
+bfa_fcport_ln_sm_up_dn_nf(struct bfa_fcport_ln_s *ln,
+		enum bfa_fcport_ln_sm_event event)
+{
+	bfa_trc(ln->fcport->bfa, event);
+
+	switch (event) {
+	case BFA_FCPORT_LN_SM_LINKUP:
+		bfa_sm_set_state(ln, bfa_fcport_ln_sm_up_dn_up_nf);
+		break;
+
+	case BFA_FCPORT_LN_SM_NOTIFICATION:
+		bfa_sm_set_state(ln, bfa_fcport_ln_sm_dn_nf);
+		bfa_fcport_queue_cb(ln, BFA_PPORT_LINKDOWN);
+		break;
+
+	default:
+		bfa_sm_fault(ln->fcport->bfa, event);
+	}
+}
+
+/**
+ * Link state is waiting for up notification and there are pending down and up
+ */
+static void
+bfa_fcport_ln_sm_up_dn_up_nf(struct bfa_fcport_ln_s *ln,
+			enum bfa_fcport_ln_sm_event event)
+{
+	bfa_trc(ln->fcport->bfa, event);
+
+	switch (event) {
+	case BFA_FCPORT_LN_SM_LINKDOWN:
+		bfa_sm_set_state(ln, bfa_fcport_ln_sm_up_dn_nf);
+		break;
+
+	case BFA_FCPORT_LN_SM_NOTIFICATION:
+		bfa_sm_set_state(ln, bfa_fcport_ln_sm_dn_up_nf);
+		bfa_fcport_queue_cb(ln, BFA_PPORT_LINKDOWN);
+		break;
+
+	default:
+		bfa_sm_fault(ln->fcport->bfa, event);
+	}
+}
 
 /**
  *  bfa_pport_private
  */
 
 static void
-__bfa_cb_port_event(void *cbarg, bfa_boolean_t complete)
+__bfa_cb_fcport_event(void *cbarg, bfa_boolean_t complete)
 {
-	struct bfa_pport_s *pport = cbarg;
+	struct bfa_fcport_ln_s *ln = cbarg;
 
 	if (complete)
-		pport->event_cbfn(pport->event_cbarg, pport->hcb_event);
+		ln->fcport->event_cbfn(ln->fcport->event_cbarg, ln->ln_event);
+	else
+		bfa_sm_send_event(ln, BFA_FCPORT_LN_SM_NOTIFICATION);
 }
 
-#define PPORT_STATS_DMA_SZ (BFA_ROUNDUP(sizeof(union bfa_pport_stats_u), \
+static void
+bfa_fcport_callback(struct bfa_fcport_s *fcport, enum bfa_pport_linkstate event)
+{
+	if (fcport->bfa->fcs) {
+		fcport->event_cbfn(fcport->event_cbarg, event);
+		return;
+	}
+
+	switch (event) {
+	case BFA_PPORT_LINKUP:
+		bfa_sm_send_event(&fcport->ln, BFA_FCPORT_LN_SM_LINKUP);
+		break;
+	case BFA_PPORT_LINKDOWN:
+		bfa_sm_send_event(&fcport->ln, BFA_FCPORT_LN_SM_LINKDOWN);
+		break;
+	default:
+		bfa_assert(0);
+	}
+}
+
+static void
+bfa_fcport_queue_cb(struct bfa_fcport_ln_s *ln, enum bfa_pport_linkstate event)
+{
+	ln->ln_event = event;
+	bfa_cb_queue(ln->fcport->bfa, &ln->ln_qe, __bfa_cb_fcport_event, ln);
+}
+
+#define FCPORT_STATS_DMA_SZ (BFA_ROUNDUP(sizeof(union bfa_fcport_stats_u), \
 							BFA_CACHELINE_SZ))
 
 static void
-bfa_pport_meminfo(struct bfa_iocfc_cfg_s *cfg, u32 *ndm_len,
+bfa_fcport_meminfo(struct bfa_iocfc_cfg_s *cfg, u32 *ndm_len,
 		  u32 *dm_len)
 {
-	*dm_len += PPORT_STATS_DMA_SZ;
+	*dm_len += FCPORT_STATS_DMA_SZ;
 }
 
 static void
-bfa_pport_qresume(void *cbarg)
+bfa_fcport_qresume(void *cbarg)
 {
-	struct bfa_pport_s *port = cbarg;
+	struct bfa_fcport_s *fcport = cbarg;
 
-	bfa_sm_send_event(port, BFA_PPORT_SM_QRESUME);
+	bfa_sm_send_event(fcport, BFA_FCPORT_SM_QRESUME);
 }
 
 static void
-bfa_pport_mem_claim(struct bfa_pport_s *pport, struct bfa_meminfo_s *meminfo)
+bfa_fcport_mem_claim(struct bfa_fcport_s *fcport, struct bfa_meminfo_s *meminfo)
 {
 	u8        *dm_kva;
 	u64        dm_pa;
@@ -661,12 +867,12 @@ bfa_pport_mem_claim(struct bfa_pport_s *pport, struct bfa_meminfo_s *meminfo)
 	dm_kva = bfa_meminfo_dma_virt(meminfo);
 	dm_pa = bfa_meminfo_dma_phys(meminfo);
 
-	pport->stats_kva = dm_kva;
-	pport->stats_pa = dm_pa;
-	pport->stats = (union bfa_pport_stats_u *)dm_kva;
+	fcport->stats_kva = dm_kva;
+	fcport->stats_pa = dm_pa;
+	fcport->stats = (union bfa_fcport_stats_u *)dm_kva;
 
-	dm_kva += PPORT_STATS_DMA_SZ;
-	dm_pa += PPORT_STATS_DMA_SZ;
+	dm_kva += FCPORT_STATS_DMA_SZ;
+	dm_pa += FCPORT_STATS_DMA_SZ;
 
 	bfa_meminfo_dma_virt(meminfo) = dm_kva;
 	bfa_meminfo_dma_phys(meminfo) = dm_pa;
@@ -676,18 +882,21 @@ bfa_pport_mem_claim(struct bfa_pport_s *pport, struct bfa_meminfo_s *meminfo)
  * Memory initialization.
  */
 static void
-bfa_pport_attach(struct bfa_s *bfa, void *bfad, struct bfa_iocfc_cfg_s *cfg,
+bfa_fcport_attach(struct bfa_s *bfa, void *bfad, struct bfa_iocfc_cfg_s *cfg,
 		 struct bfa_meminfo_s *meminfo, struct bfa_pcidev_s *pcidev)
 {
-	struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
-	struct bfa_pport_cfg_s *port_cfg = &pport->cfg;
+	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
+	struct bfa_pport_cfg_s *port_cfg = &fcport->cfg;
+	struct bfa_fcport_ln_s *ln = &fcport->ln;
 
-	bfa_os_memset(pport, 0, sizeof(struct bfa_pport_s));
-	pport->bfa = bfa;
+	bfa_os_memset(fcport, 0, sizeof(struct bfa_fcport_s));
+	fcport->bfa = bfa;
+	ln->fcport = fcport;
 
-	bfa_pport_mem_claim(pport, meminfo);
+	bfa_fcport_mem_claim(fcport, meminfo);
 
-	bfa_sm_set_state(pport, bfa_pport_sm_uninit);
+	bfa_sm_set_state(fcport, bfa_fcport_sm_uninit);
+	bfa_sm_set_state(ln, bfa_fcport_ln_sm_dn);
 
 	/**
 	 * initialize and set default configuration
@@ -699,30 +908,30 @@ bfa_pport_attach(struct bfa_s *bfa, void *bfad, struct bfa_iocfc_cfg_s *cfg,
 
 	port_cfg->trl_def_speed = BFA_PPORT_SPEED_1GBPS;
 
-	bfa_reqq_winit(&pport->reqq_wait, bfa_pport_qresume, pport);
+	bfa_reqq_winit(&fcport->reqq_wait, bfa_fcport_qresume, fcport);
 }
 
 static void
-bfa_pport_initdone(struct bfa_s *bfa)
+bfa_fcport_initdone(struct bfa_s *bfa)
 {
-	struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
 
 	/**
 	 * Initialize port attributes from IOC hardware data.
 	 */
-	bfa_pport_set_wwns(pport);
-	if (pport->cfg.maxfrsize == 0)
-		pport->cfg.maxfrsize = bfa_ioc_maxfrsize(&bfa->ioc);
-	pport->cfg.rx_bbcredit = bfa_ioc_rx_bbcredit(&bfa->ioc);
-	pport->speed_sup = bfa_ioc_speed_sup(&bfa->ioc);
+	bfa_fcport_set_wwns(fcport);
+	if (fcport->cfg.maxfrsize == 0)
+		fcport->cfg.maxfrsize = bfa_ioc_maxfrsize(&bfa->ioc);
+	fcport->cfg.rx_bbcredit = bfa_ioc_rx_bbcredit(&bfa->ioc);
+	fcport->speed_sup = bfa_ioc_speed_sup(&bfa->ioc);
 
-	bfa_assert(pport->cfg.maxfrsize);
-	bfa_assert(pport->cfg.rx_bbcredit);
-	bfa_assert(pport->speed_sup);
+	bfa_assert(fcport->cfg.maxfrsize);
+	bfa_assert(fcport->cfg.rx_bbcredit);
+	bfa_assert(fcport->speed_sup);
 }
 
 static void
-bfa_pport_detach(struct bfa_s *bfa)
+bfa_fcport_detach(struct bfa_s *bfa)
 {
 }
 
@@ -730,95 +939,97 @@ bfa_pport_detach(struct bfa_s *bfa)
  * Called when IOC is ready.
  */
 static void
-bfa_pport_start(struct bfa_s *bfa)
+bfa_fcport_start(struct bfa_s *bfa)
 {
-	bfa_sm_send_event(BFA_PORT_MOD(bfa), BFA_PPORT_SM_START);
+	bfa_sm_send_event(BFA_FCPORT_MOD(bfa), BFA_FCPORT_SM_START);
 }
 
 /**
  * Called before IOC is stopped.
  */
 static void
-bfa_pport_stop(struct bfa_s *bfa)
+bfa_fcport_stop(struct bfa_s *bfa)
 {
-	bfa_sm_send_event(BFA_PORT_MOD(bfa), BFA_PPORT_SM_STOP);
+	bfa_sm_send_event(BFA_FCPORT_MOD(bfa), BFA_FCPORT_SM_STOP);
 }
 
 /**
  * Called when IOC failure is detected.
  */
 static void
-bfa_pport_iocdisable(struct bfa_s *bfa)
+bfa_fcport_iocdisable(struct bfa_s *bfa)
 {
-	bfa_sm_send_event(BFA_PORT_MOD(bfa), BFA_PPORT_SM_HWFAIL);
+	bfa_sm_send_event(BFA_FCPORT_MOD(bfa), BFA_FCPORT_SM_HWFAIL);
 }
 
 static void
-bfa_pport_update_linkinfo(struct bfa_pport_s *pport)
+bfa_fcport_update_linkinfo(struct bfa_fcport_s *fcport)
 {
-	struct bfi_pport_event_s *pevent = pport->event_arg.i2hmsg.event;
+	struct bfi_fcport_event_s *pevent = fcport->event_arg.i2hmsg.event;
 
-	pport->speed = pevent->link_state.speed;
-	pport->topology = pevent->link_state.topology;
+	fcport->speed = pevent->link_state.speed;
+	fcport->topology = pevent->link_state.topology;
 
-	if (pport->topology == BFA_PPORT_TOPOLOGY_LOOP)
-		pport->myalpa = pevent->link_state.tl.loop_info.myalpa;
+	if (fcport->topology == BFA_PPORT_TOPOLOGY_LOOP)
+		fcport->myalpa =
+			pevent->link_state.tl.loop_info.myalpa;
 
 	/*
 	 * QoS Details
 	 */
-	bfa_os_assign(pport->qos_attr, pevent->link_state.qos_attr);
-	bfa_os_assign(pport->qos_vc_attr, pevent->link_state.qos_vc_attr);
+	bfa_os_assign(fcport->qos_attr, pevent->link_state.qos_attr);
+	bfa_os_assign(fcport->qos_vc_attr, pevent->link_state.qos_vc_attr);
 
-	bfa_trc(pport->bfa, pport->speed);
-	bfa_trc(pport->bfa, pport->topology);
+	bfa_trc(fcport->bfa, fcport->speed);
+	bfa_trc(fcport->bfa, fcport->topology);
 }
 
 static void
-bfa_pport_reset_linkinfo(struct bfa_pport_s *pport)
+bfa_fcport_reset_linkinfo(struct bfa_fcport_s *fcport)
 {
-	pport->speed = BFA_PPORT_SPEED_UNKNOWN;
-	pport->topology = BFA_PPORT_TOPOLOGY_NONE;
+	fcport->speed = BFA_PPORT_SPEED_UNKNOWN;
+	fcport->topology = BFA_PPORT_TOPOLOGY_NONE;
 }
 
 /**
  * Send port enable message to firmware.
  */
 static          bfa_boolean_t
-bfa_pport_send_enable(struct bfa_pport_s *port)
+bfa_fcport_send_enable(struct bfa_fcport_s *fcport)
 {
-	struct bfi_pport_enable_req_s *m;
+	struct bfi_fcport_enable_req_s *m;
 
 	/**
 	 * Increment message tag before queue check, so that responses to old
 	 * requests are discarded.
 	 */
-	port->msgtag++;
+	fcport->msgtag++;
 
 	/**
 	 * check for room in queue to send request now
 	 */
-	m = bfa_reqq_next(port->bfa, BFA_REQQ_PORT);
+	m = bfa_reqq_next(fcport->bfa, BFA_REQQ_PORT);
 	if (!m) {
-		bfa_reqq_wait(port->bfa, BFA_REQQ_PORT, &port->reqq_wait);
+		bfa_reqq_wait(fcport->bfa, BFA_REQQ_PORT,
+							&fcport->reqq_wait);
 		return BFA_FALSE;
 	}
 
-	bfi_h2i_set(m->mh, BFI_MC_FC_PORT, BFI_PPORT_H2I_ENABLE_REQ,
-		    bfa_lpuid(port->bfa));
-	m->nwwn = port->nwwn;
-	m->pwwn = port->pwwn;
-	m->port_cfg = port->cfg;
-	m->msgtag = port->msgtag;
-	m->port_cfg.maxfrsize = bfa_os_htons(port->cfg.maxfrsize);
-	bfa_dma_be_addr_set(m->stats_dma_addr, port->stats_pa);
-	bfa_trc(port->bfa, m->stats_dma_addr.a32.addr_lo);
-	bfa_trc(port->bfa, m->stats_dma_addr.a32.addr_hi);
+	bfi_h2i_set(m->mh, BFI_MC_FCPORT, BFI_FCPORT_H2I_ENABLE_REQ,
+				bfa_lpuid(fcport->bfa));
+	m->nwwn = fcport->nwwn;
+	m->pwwn = fcport->pwwn;
+	m->port_cfg = fcport->cfg;
+	m->msgtag = fcport->msgtag;
+	m->port_cfg.maxfrsize = bfa_os_htons(fcport->cfg.maxfrsize);
+	bfa_dma_be_addr_set(m->stats_dma_addr, fcport->stats_pa);
+	bfa_trc(fcport->bfa, m->stats_dma_addr.a32.addr_lo);
+	bfa_trc(fcport->bfa, m->stats_dma_addr.a32.addr_hi);
 
 	/**
 	 * queue I/O message to firmware
 	 */
-	bfa_reqq_produce(port->bfa, BFA_REQQ_PORT);
+	bfa_reqq_produce(fcport->bfa, BFA_REQQ_PORT);
 	return BFA_TRUE;
 }
 
@@ -826,74 +1037,226 @@ bfa_pport_send_enable(struct bfa_pport_s *port)
  * Send port disable message to firmware.
  */
 static          bfa_boolean_t
-bfa_pport_send_disable(struct bfa_pport_s *port)
+bfa_fcport_send_disable(struct bfa_fcport_s *fcport)
 {
-	bfi_pport_disable_req_t *m;
+	struct bfi_fcport_req_s *m;
 
 	/**
 	 * Increment message tag before queue check, so that responses to old
 	 * requests are discarded.
 	 */
-	port->msgtag++;
+	fcport->msgtag++;
 
 	/**
 	 * check for room in queue to send request now
 	 */
-	m = bfa_reqq_next(port->bfa, BFA_REQQ_PORT);
+	m = bfa_reqq_next(fcport->bfa, BFA_REQQ_PORT);
 	if (!m) {
-		bfa_reqq_wait(port->bfa, BFA_REQQ_PORT, &port->reqq_wait);
+		bfa_reqq_wait(fcport->bfa, BFA_REQQ_PORT,
+							&fcport->reqq_wait);
 		return BFA_FALSE;
 	}
 
-	bfi_h2i_set(m->mh, BFI_MC_FC_PORT, BFI_PPORT_H2I_DISABLE_REQ,
-		    bfa_lpuid(port->bfa));
-	m->msgtag = port->msgtag;
+	bfi_h2i_set(m->mh, BFI_MC_FCPORT, BFI_FCPORT_H2I_DISABLE_REQ,
+			bfa_lpuid(fcport->bfa));
+	m->msgtag = fcport->msgtag;
 
 	/**
 	 * queue I/O message to firmware
 	 */
-	bfa_reqq_produce(port->bfa, BFA_REQQ_PORT);
+	bfa_reqq_produce(fcport->bfa, BFA_REQQ_PORT);
 
 	return BFA_TRUE;
 }
 
 static void
-bfa_pport_set_wwns(struct bfa_pport_s *port)
+bfa_fcport_set_wwns(struct bfa_fcport_s *fcport)
 {
-	port->pwwn = bfa_ioc_get_pwwn(&port->bfa->ioc);
-	port->nwwn = bfa_ioc_get_nwwn(&port->bfa->ioc);
+	fcport->pwwn = bfa_ioc_get_pwwn(&fcport->bfa->ioc);
+	fcport->nwwn = bfa_ioc_get_nwwn(&fcport->bfa->ioc);
 
-	bfa_trc(port->bfa, port->pwwn);
-	bfa_trc(port->bfa, port->nwwn);
+	bfa_trc(fcport->bfa, fcport->pwwn);
+	bfa_trc(fcport->bfa, fcport->nwwn);
 }
 
 static void
-bfa_port_send_txcredit(void *port_cbarg)
+bfa_fcport_send_txcredit(void *port_cbarg)
 {
 
-	struct bfa_pport_s *port = port_cbarg;
-	struct bfi_pport_set_svc_params_req_s *m;
+	struct bfa_fcport_s *fcport = port_cbarg;
+	struct bfi_fcport_set_svc_params_req_s *m;
 
 	/**
 	 * check for room in queue to send request now
 	 */
-	m = bfa_reqq_next(port->bfa, BFA_REQQ_PORT);
+	m = bfa_reqq_next(fcport->bfa, BFA_REQQ_PORT);
 	if (!m) {
-		bfa_trc(port->bfa, port->cfg.tx_bbcredit);
+		bfa_trc(fcport->bfa, fcport->cfg.tx_bbcredit);
 		return;
 	}
 
-	bfi_h2i_set(m->mh, BFI_MC_FC_PORT, BFI_PPORT_H2I_SET_SVC_PARAMS_REQ,
-		    bfa_lpuid(port->bfa));
-	m->tx_bbcredit = bfa_os_htons((u16) port->cfg.tx_bbcredit);
+	bfi_h2i_set(m->mh, BFI_MC_FCPORT, BFI_FCPORT_H2I_SET_SVC_PARAMS_REQ,
+			bfa_lpuid(fcport->bfa));
+	m->tx_bbcredit = bfa_os_htons((u16) fcport->cfg.tx_bbcredit);
 
 	/**
 	 * queue I/O message to firmware
 	 */
-	bfa_reqq_produce(port->bfa, BFA_REQQ_PORT);
+	bfa_reqq_produce(fcport->bfa, BFA_REQQ_PORT);
 }
 
+static void
+bfa_fcport_qos_stats_swap(struct bfa_qos_stats_s *d,
+	struct bfa_qos_stats_s *s)
+{
+	u32     *dip = (u32 *) d;
+	u32     *sip = (u32 *) s;
+	int             i;
+
+	/* Now swap the 32 bit fields */
+	for (i = 0; i < (sizeof(struct bfa_qos_stats_s)/sizeof(u32)); ++i)
+		dip[i] = bfa_os_ntohl(sip[i]);
+}
 
+static void
+bfa_fcport_fcoe_stats_swap(struct bfa_fcoe_stats_s *d,
+	struct bfa_fcoe_stats_s *s)
+{
+	u32     *dip = (u32 *) d;
+	u32     *sip = (u32 *) s;
+	int             i;
+
+	for (i = 0; i < ((sizeof(struct bfa_fcoe_stats_s))/sizeof(u32));
+		i = i + 2) {
+#ifdef __BIGENDIAN
+		dip[i] = bfa_os_ntohl(sip[i]);
+		dip[i + 1] = bfa_os_ntohl(sip[i + 1]);
+#else
+		dip[i] = bfa_os_ntohl(sip[i + 1]);
+		dip[i + 1] = bfa_os_ntohl(sip[i]);
+#endif
+	}
+}
+
+static void
+__bfa_cb_fcport_stats_get(void *cbarg, bfa_boolean_t complete)
+{
+	struct bfa_fcport_s *fcport = cbarg;
+
+	if (complete) {
+		if (fcport->stats_status == BFA_STATUS_OK) {
+
+			/* Swap FC QoS or FCoE stats */
+			if (bfa_ioc_get_fcmode(&fcport->bfa->ioc))
+				bfa_fcport_qos_stats_swap(
+					&fcport->stats_ret->fcqos,
+					&fcport->stats->fcqos);
+			else
+				bfa_fcport_fcoe_stats_swap(
+					&fcport->stats_ret->fcoe,
+					&fcport->stats->fcoe);
+		}
+		fcport->stats_cbfn(fcport->stats_cbarg, fcport->stats_status);
+	} else {
+		fcport->stats_busy = BFA_FALSE;
+		fcport->stats_status = BFA_STATUS_OK;
+	}
+}
+
+static void
+bfa_fcport_stats_get_timeout(void *cbarg)
+{
+	struct bfa_fcport_s *fcport = (struct bfa_fcport_s *) cbarg;
+
+	bfa_trc(fcport->bfa, fcport->stats_qfull);
+
+	if (fcport->stats_qfull) {
+		bfa_reqq_wcancel(&fcport->stats_reqq_wait);
+		fcport->stats_qfull = BFA_FALSE;
+	}
+
+	fcport->stats_status = BFA_STATUS_ETIMER;
+	bfa_cb_queue(fcport->bfa, &fcport->hcb_qe, __bfa_cb_fcport_stats_get,
+		fcport);
+}
+
+static void
+bfa_fcport_send_stats_get(void *cbarg)
+{
+	struct bfa_fcport_s *fcport = (struct bfa_fcport_s *) cbarg;
+	struct bfi_fcport_req_s *msg;
+
+	msg = bfa_reqq_next(fcport->bfa, BFA_REQQ_PORT);
+
+	if (!msg) {
+		fcport->stats_qfull = BFA_TRUE;
+		bfa_reqq_winit(&fcport->stats_reqq_wait,
+				bfa_fcport_send_stats_get, fcport);
+		bfa_reqq_wait(fcport->bfa, BFA_REQQ_PORT,
+				&fcport->stats_reqq_wait);
+		return;
+	}
+	fcport->stats_qfull = BFA_FALSE;
+
+	bfa_os_memset(msg, 0, sizeof(struct bfi_fcport_req_s));
+	bfi_h2i_set(msg->mh, BFI_MC_FCPORT, BFI_FCPORT_H2I_STATS_GET_REQ,
+		bfa_lpuid(fcport->bfa));
+	bfa_reqq_produce(fcport->bfa, BFA_REQQ_PORT);
+}
+
+static void
+__bfa_cb_fcport_stats_clr(void *cbarg, bfa_boolean_t complete)
+{
+	struct bfa_fcport_s *fcport = cbarg;
+
+	if (complete) {
+		fcport->stats_cbfn(fcport->stats_cbarg, fcport->stats_status);
+	} else {
+		fcport->stats_busy = BFA_FALSE;
+		fcport->stats_status = BFA_STATUS_OK;
+	}
+}
+
+static void
+bfa_fcport_stats_clr_timeout(void *cbarg)
+{
+	struct bfa_fcport_s *fcport = (struct bfa_fcport_s *) cbarg;
+
+	bfa_trc(fcport->bfa, fcport->stats_qfull);
+
+	if (fcport->stats_qfull) {
+		bfa_reqq_wcancel(&fcport->stats_reqq_wait);
+		fcport->stats_qfull = BFA_FALSE;
+	}
+
+	fcport->stats_status = BFA_STATUS_ETIMER;
+	bfa_cb_queue(fcport->bfa, &fcport->hcb_qe,
+			__bfa_cb_fcport_stats_clr, fcport);
+}
+
+static void
+bfa_fcport_send_stats_clear(void *cbarg)
+{
+	struct bfa_fcport_s *fcport = (struct bfa_fcport_s *) cbarg;
+	struct bfi_fcport_req_s *msg;
+
+	msg = bfa_reqq_next(fcport->bfa, BFA_REQQ_PORT);
+
+	if (!msg) {
+		fcport->stats_qfull = BFA_TRUE;
+		bfa_reqq_winit(&fcport->stats_reqq_wait,
+				bfa_fcport_send_stats_clear, fcport);
+		bfa_reqq_wait(fcport->bfa, BFA_REQQ_PORT,
+				&fcport->stats_reqq_wait);
+		return;
+	}
+	fcport->stats_qfull = BFA_FALSE;
+
+	bfa_os_memset(msg, 0, sizeof(struct bfi_fcport_req_s));
+	bfi_h2i_set(msg->mh, BFI_MC_FCPORT, BFI_FCPORT_H2I_STATS_CLEAR_REQ,
+			bfa_lpuid(fcport->bfa));
+	bfa_reqq_produce(fcport->bfa, BFA_REQQ_PORT);
+}
 
 /**
  *  bfa_pport_public
@@ -903,32 +1266,32 @@ bfa_port_send_txcredit(void *port_cbarg)
  * Firmware message handler.
  */
 void
-bfa_pport_isr(struct bfa_s *bfa, struct bfi_msg_s *msg)
+bfa_fcport_isr(struct bfa_s *bfa, struct bfi_msg_s *msg)
 {
-	struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
-	union bfi_pport_i2h_msg_u i2hmsg;
+	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
+	union bfi_fcport_i2h_msg_u i2hmsg;
 
 	i2hmsg.msg = msg;
-	pport->event_arg.i2hmsg = i2hmsg;
+	fcport->event_arg.i2hmsg = i2hmsg;
 
 	switch (msg->mhdr.msg_id) {
-	case BFI_PPORT_I2H_ENABLE_RSP:
-		if (pport->msgtag == i2hmsg.enable_rsp->msgtag)
-			bfa_sm_send_event(pport, BFA_PPORT_SM_FWRSP);
+	case BFI_FCPORT_I2H_ENABLE_RSP:
+		if (fcport->msgtag == i2hmsg.penable_rsp->msgtag)
+			bfa_sm_send_event(fcport, BFA_FCPORT_SM_FWRSP);
 		break;
 
-	case BFI_PPORT_I2H_DISABLE_RSP:
-		if (pport->msgtag == i2hmsg.enable_rsp->msgtag)
-			bfa_sm_send_event(pport, BFA_PPORT_SM_FWRSP);
+	case BFI_FCPORT_I2H_DISABLE_RSP:
+		if (fcport->msgtag == i2hmsg.penable_rsp->msgtag)
+			bfa_sm_send_event(fcport, BFA_FCPORT_SM_FWRSP);
 		break;
 
-	case BFI_PPORT_I2H_EVENT:
+	case BFI_FCPORT_I2H_EVENT:
 		switch (i2hmsg.event->link_state.linkstate) {
 		case BFA_PPORT_LINKUP:
-			bfa_sm_send_event(pport, BFA_PPORT_SM_LINKUP);
+			bfa_sm_send_event(fcport, BFA_FCPORT_SM_LINKUP);
 			break;
 		case BFA_PPORT_LINKDOWN:
-			bfa_sm_send_event(pport, BFA_PPORT_SM_LINKDOWN);
+			bfa_sm_send_event(fcport, BFA_FCPORT_SM_LINKDOWN);
 			break;
 		case BFA_PPORT_TRUNK_LINKDOWN:
 			/** todo: event notification */
@@ -936,42 +1299,40 @@ bfa_pport_isr(struct bfa_s *bfa, struct bfi_msg_s *msg)
 		}
 		break;
 
-	case BFI_PPORT_I2H_GET_STATS_RSP:
-	case BFI_PPORT_I2H_GET_QOS_STATS_RSP:
+	case BFI_FCPORT_I2H_STATS_GET_RSP:
 		/*
 		 * check for timer pop before processing the rsp
 		 */
-		if (pport->stats_busy == BFA_FALSE
-		    || pport->stats_status == BFA_STATUS_ETIMER)
+		if (fcport->stats_busy == BFA_FALSE ||
+			fcport->stats_status == BFA_STATUS_ETIMER)
 			break;
 
-		bfa_timer_stop(&pport->timer);
-		pport->stats_status = i2hmsg.getstats_rsp->status;
-		bfa_cb_queue(pport->bfa, &pport->hcb_qe, __bfa_cb_port_stats,
-			     pport);
+		bfa_timer_stop(&fcport->timer);
+		fcport->stats_status = i2hmsg.pstatsget_rsp->status;
+		bfa_cb_queue(fcport->bfa, &fcport->hcb_qe,
+				__bfa_cb_fcport_stats_get, fcport);
 		break;
-	case BFI_PPORT_I2H_CLEAR_STATS_RSP:
-	case BFI_PPORT_I2H_CLEAR_QOS_STATS_RSP:
+
+	case BFI_FCPORT_I2H_STATS_CLEAR_RSP:
 		/*
 		 * check for timer pop before processing the rsp
 		 */
-		if (pport->stats_busy == BFA_FALSE
-		    || pport->stats_status == BFA_STATUS_ETIMER)
+		if (fcport->stats_busy == BFA_FALSE ||
+			fcport->stats_status == BFA_STATUS_ETIMER)
 			break;
 
-		bfa_timer_stop(&pport->timer);
-		pport->stats_status = BFA_STATUS_OK;
-		bfa_cb_queue(pport->bfa, &pport->hcb_qe,
-			     __bfa_cb_port_stats_clr, pport);
+		bfa_timer_stop(&fcport->timer);
+		fcport->stats_status = BFA_STATUS_OK;
+		bfa_cb_queue(fcport->bfa, &fcport->hcb_qe,
+				__bfa_cb_fcport_stats_clr, fcport);
 		break;
 
 	default:
 		bfa_assert(0);
+	break;
 	}
 }
 
-
-
 /**
  *  bfa_pport_api
  */
@@ -980,35 +1341,35 @@ bfa_pport_isr(struct bfa_s *bfa, struct bfi_msg_s *msg)
  * Registered callback for port events.
  */
 void
-bfa_pport_event_register(struct bfa_s *bfa,
+bfa_fcport_event_register(struct bfa_s *bfa,
 			 void (*cbfn) (void *cbarg, bfa_pport_event_t event),
 			 void *cbarg)
 {
-	struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
 
-	pport->event_cbfn = cbfn;
-	pport->event_cbarg = cbarg;
+	fcport->event_cbfn = cbfn;
+	fcport->event_cbarg = cbarg;
 }
 
 bfa_status_t
-bfa_pport_enable(struct bfa_s *bfa)
+bfa_fcport_enable(struct bfa_s *bfa)
 {
-	struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
 
-	if (pport->diag_busy)
+	if (fcport->diag_busy)
 		return BFA_STATUS_DIAG_BUSY;
 	else if (bfa_sm_cmp_state
-		 (BFA_PORT_MOD(bfa), bfa_pport_sm_disabling_qwait))
+		 (BFA_FCPORT_MOD(bfa), bfa_fcport_sm_disabling_qwait))
 		return BFA_STATUS_DEVBUSY;
 
-	bfa_sm_send_event(BFA_PORT_MOD(bfa), BFA_PPORT_SM_ENABLE);
+	bfa_sm_send_event(BFA_FCPORT_MOD(bfa), BFA_FCPORT_SM_ENABLE);
 	return BFA_STATUS_OK;
 }
 
 bfa_status_t
-bfa_pport_disable(struct bfa_s *bfa)
+bfa_fcport_disable(struct bfa_s *bfa)
 {
-	bfa_sm_send_event(BFA_PORT_MOD(bfa), BFA_PPORT_SM_DISABLE);
+	bfa_sm_send_event(BFA_FCPORT_MOD(bfa), BFA_FCPORT_SM_DISABLE);
 	return BFA_STATUS_OK;
 }
 
@@ -1016,18 +1377,18 @@ bfa_pport_disable(struct bfa_s *bfa)
  * Configure port speed.
  */
 bfa_status_t
-bfa_pport_cfg_speed(struct bfa_s *bfa, enum bfa_pport_speed speed)
+bfa_fcport_cfg_speed(struct bfa_s *bfa, enum bfa_pport_speed speed)
 {
-	struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
 
 	bfa_trc(bfa, speed);
 
-	if ((speed != BFA_PPORT_SPEED_AUTO) && (speed > pport->speed_sup)) {
-		bfa_trc(bfa, pport->speed_sup);
+	if ((speed != BFA_PPORT_SPEED_AUTO) && (speed > fcport->speed_sup)) {
+		bfa_trc(bfa, fcport->speed_sup);
 		return BFA_STATUS_UNSUPP_SPEED;
 	}
 
-	pport->cfg.speed = speed;
+	fcport->cfg.speed = speed;
 
 	return BFA_STATUS_OK;
 }
@@ -1036,23 +1397,23 @@ bfa_pport_cfg_speed(struct bfa_s *bfa, enum bfa_pport_speed speed)
  * Get current speed.
  */
 enum bfa_pport_speed
-bfa_pport_get_speed(struct bfa_s *bfa)
+bfa_fcport_get_speed(struct bfa_s *bfa)
 {
-	struct bfa_pport_s *port = BFA_PORT_MOD(bfa);
+	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
 
-	return port->speed;
+	return fcport->speed;
 }
 
 /**
  * Configure port topology.
  */
 bfa_status_t
-bfa_pport_cfg_topology(struct bfa_s *bfa, enum bfa_pport_topology topology)
+bfa_fcport_cfg_topology(struct bfa_s *bfa, enum bfa_pport_topology topology)
 {
-	struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
 
 	bfa_trc(bfa, topology);
-	bfa_trc(bfa, pport->cfg.topology);
+	bfa_trc(bfa, fcport->cfg.topology);
 
 	switch (topology) {
 	case BFA_PPORT_TOPOLOGY_P2P:
@@ -1064,7 +1425,7 @@ bfa_pport_cfg_topology(struct bfa_s *bfa, enum bfa_pport_topology topology)
 		return BFA_STATUS_EINVAL;
 	}
 
-	pport->cfg.topology = topology;
+	fcport->cfg.topology = topology;
 	return BFA_STATUS_OK;
 }
 
@@ -1072,64 +1433,64 @@ bfa_pport_cfg_topology(struct bfa_s *bfa, enum bfa_pport_topology topology)
  * Get current topology.
  */
 enum bfa_pport_topology
-bfa_pport_get_topology(struct bfa_s *bfa)
+bfa_fcport_get_topology(struct bfa_s *bfa)
 {
-	struct bfa_pport_s *port = BFA_PORT_MOD(bfa);
+	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
 
-	return port->topology;
+	return fcport->topology;
 }
 
 bfa_status_t
-bfa_pport_cfg_hardalpa(struct bfa_s *bfa, u8 alpa)
+bfa_fcport_cfg_hardalpa(struct bfa_s *bfa, u8 alpa)
 {
-	struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
 
 	bfa_trc(bfa, alpa);
-	bfa_trc(bfa, pport->cfg.cfg_hardalpa);
-	bfa_trc(bfa, pport->cfg.hardalpa);
+	bfa_trc(bfa, fcport->cfg.cfg_hardalpa);
+	bfa_trc(bfa, fcport->cfg.hardalpa);
 
-	pport->cfg.cfg_hardalpa = BFA_TRUE;
-	pport->cfg.hardalpa = alpa;
+	fcport->cfg.cfg_hardalpa = BFA_TRUE;
+	fcport->cfg.hardalpa = alpa;
 
 	return BFA_STATUS_OK;
 }
 
 bfa_status_t
-bfa_pport_clr_hardalpa(struct bfa_s *bfa)
+bfa_fcport_clr_hardalpa(struct bfa_s *bfa)
 {
-	struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
 
-	bfa_trc(bfa, pport->cfg.cfg_hardalpa);
-	bfa_trc(bfa, pport->cfg.hardalpa);
+	bfa_trc(bfa, fcport->cfg.cfg_hardalpa);
+	bfa_trc(bfa, fcport->cfg.hardalpa);
 
-	pport->cfg.cfg_hardalpa = BFA_FALSE;
+	fcport->cfg.cfg_hardalpa = BFA_FALSE;
 	return BFA_STATUS_OK;
 }
 
 bfa_boolean_t
-bfa_pport_get_hardalpa(struct bfa_s *bfa, u8 *alpa)
+bfa_fcport_get_hardalpa(struct bfa_s *bfa, u8 *alpa)
 {
-	struct bfa_pport_s *port = BFA_PORT_MOD(bfa);
+	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
 
-	*alpa = port->cfg.hardalpa;
-	return port->cfg.cfg_hardalpa;
+	*alpa = fcport->cfg.hardalpa;
+	return fcport->cfg.cfg_hardalpa;
 }
 
 u8
-bfa_pport_get_myalpa(struct bfa_s *bfa)
+bfa_fcport_get_myalpa(struct bfa_s *bfa)
 {
-	struct bfa_pport_s *port = BFA_PORT_MOD(bfa);
+	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
 
-	return port->myalpa;
+	return fcport->myalpa;
 }
 
 bfa_status_t
-bfa_pport_cfg_maxfrsize(struct bfa_s *bfa, u16 maxfrsize)
+bfa_fcport_cfg_maxfrsize(struct bfa_s *bfa, u16 maxfrsize)
 {
-	struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
 
 	bfa_trc(bfa, maxfrsize);
-	bfa_trc(bfa, pport->cfg.maxfrsize);
+	bfa_trc(bfa, fcport->cfg.maxfrsize);
 
 	/*
 	 * with in range
@@ -1143,41 +1504,41 @@ bfa_pport_cfg_maxfrsize(struct bfa_s *bfa, u16 maxfrsize)
 	if ((maxfrsize != FC_MAX_PDUSZ) && (maxfrsize & (maxfrsize - 1)))
 		return BFA_STATUS_INVLD_DFSZ;
 
-	pport->cfg.maxfrsize = maxfrsize;
+	fcport->cfg.maxfrsize = maxfrsize;
 	return BFA_STATUS_OK;
 }
 
 u16
-bfa_pport_get_maxfrsize(struct bfa_s *bfa)
+bfa_fcport_get_maxfrsize(struct bfa_s *bfa)
 {
-	struct bfa_pport_s *port = BFA_PORT_MOD(bfa);
+	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
 
-	return port->cfg.maxfrsize;
+	return fcport->cfg.maxfrsize;
 }
 
 u32
-bfa_pport_mypid(struct bfa_s *bfa)
+bfa_fcport_mypid(struct bfa_s *bfa)
 {
-	struct bfa_pport_s *port = BFA_PORT_MOD(bfa);
+	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
 
-	return port->mypid;
+	return fcport->mypid;
 }
 
 u8
-bfa_pport_get_rx_bbcredit(struct bfa_s *bfa)
+bfa_fcport_get_rx_bbcredit(struct bfa_s *bfa)
 {
-	struct bfa_pport_s *port = BFA_PORT_MOD(bfa);
+	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
 
-	return port->cfg.rx_bbcredit;
+	return fcport->cfg.rx_bbcredit;
 }
 
 void
-bfa_pport_set_tx_bbcredit(struct bfa_s *bfa, u16 tx_bbcredit)
+bfa_fcport_set_tx_bbcredit(struct bfa_s *bfa, u16 tx_bbcredit)
 {
-	struct bfa_pport_s *port = BFA_PORT_MOD(bfa);
+	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
 
-	port->cfg.tx_bbcredit = (u8) tx_bbcredit;
-	bfa_port_send_txcredit(port);
+	fcport->cfg.tx_bbcredit = (u8) tx_bbcredit;
+	bfa_fcport_send_txcredit(fcport);
 }
 
 /**
@@ -1185,302 +1546,192 @@ bfa_pport_set_tx_bbcredit(struct bfa_s *bfa, u16 tx_bbcredit)
  */
 
 wwn_t
-bfa_pport_get_wwn(struct bfa_s *bfa, bfa_boolean_t node)
+bfa_fcport_get_wwn(struct bfa_s *bfa, bfa_boolean_t node)
 {
-	struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
 	if (node)
-		return pport->nwwn;
+		return fcport->nwwn;
 	else
-		return pport->pwwn;
+		return fcport->pwwn;
 }
 
 void
-bfa_pport_get_attr(struct bfa_s *bfa, struct bfa_pport_attr_s *attr)
+bfa_fcport_get_attr(struct bfa_s *bfa, struct bfa_pport_attr_s *attr)
 {
-	struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
 
 	bfa_os_memset(attr, 0, sizeof(struct bfa_pport_attr_s));
 
-	attr->nwwn = pport->nwwn;
-	attr->pwwn = pport->pwwn;
+	attr->nwwn = fcport->nwwn;
+	attr->pwwn = fcport->pwwn;
 
-	bfa_os_memcpy(&attr->pport_cfg, &pport->cfg,
+	bfa_os_memcpy(&attr->pport_cfg, &fcport->cfg,
 		      sizeof(struct bfa_pport_cfg_s));
 	/*
 	 * speed attributes
 	 */
-	attr->pport_cfg.speed = pport->cfg.speed;
-	attr->speed_supported = pport->speed_sup;
-	attr->speed = pport->speed;
+	attr->pport_cfg.speed = fcport->cfg.speed;
+	attr->speed_supported = fcport->speed_sup;
+	attr->speed = fcport->speed;
 	attr->cos_supported = FC_CLASS_3;
 
 	/*
 	 * topology attributes
 	 */
-	attr->pport_cfg.topology = pport->cfg.topology;
-	attr->topology = pport->topology;
+	attr->pport_cfg.topology = fcport->cfg.topology;
+	attr->topology = fcport->topology;
 
 	/*
 	 * beacon attributes
 	 */
-	attr->beacon = pport->beacon;
-	attr->link_e2e_beacon = pport->link_e2e_beacon;
-	attr->plog_enabled = bfa_plog_get_setting(pport->bfa->plog);
+	attr->beacon = fcport->beacon;
+	attr->link_e2e_beacon = fcport->link_e2e_beacon;
+	attr->plog_enabled = bfa_plog_get_setting(fcport->bfa->plog);
 
 	attr->pport_cfg.path_tov = bfa_fcpim_path_tov_get(bfa);
 	attr->pport_cfg.q_depth = bfa_fcpim_qdepth_get(bfa);
-	attr->port_state = bfa_sm_to_state(hal_pport_sm_table, pport->sm);
-	if (bfa_ioc_is_disabled(&pport->bfa->ioc))
+	attr->port_state = bfa_sm_to_state(hal_pport_sm_table, fcport->sm);
+	if (bfa_ioc_is_disabled(&fcport->bfa->ioc))
 		attr->port_state = BFA_PPORT_ST_IOCDIS;
-	else if (bfa_ioc_fw_mismatch(&pport->bfa->ioc))
+	else if (bfa_ioc_fw_mismatch(&fcport->bfa->ioc))
 		attr->port_state = BFA_PPORT_ST_FWMISMATCH;
 }
 
-static void
-bfa_port_stats_query(void *cbarg)
-{
-	struct bfa_pport_s *port = (struct bfa_pport_s *)cbarg;
-	bfi_pport_get_stats_req_t *msg;
-
-	msg = bfa_reqq_next(port->bfa, BFA_REQQ_PORT);
-
-	if (!msg) {
-		port->stats_qfull = BFA_TRUE;
-		bfa_reqq_winit(&port->stats_reqq_wait, bfa_port_stats_query,
-			       port);
-		bfa_reqq_wait(port->bfa, BFA_REQQ_PORT, &port->stats_reqq_wait);
-		return;
-	}
-	port->stats_qfull = BFA_FALSE;
-
-	bfa_os_memset(msg, 0, sizeof(bfi_pport_get_stats_req_t));
-	bfi_h2i_set(msg->mh, BFI_MC_FC_PORT, BFI_PPORT_H2I_GET_STATS_REQ,
-		    bfa_lpuid(port->bfa));
-	bfa_reqq_produce(port->bfa, BFA_REQQ_PORT);
-
-	return;
-}
-
-static void
-bfa_port_stats_clear(void *cbarg)
-{
-	struct bfa_pport_s *port = (struct bfa_pport_s *)cbarg;
-	bfi_pport_clear_stats_req_t *msg;
-
-	msg = bfa_reqq_next(port->bfa, BFA_REQQ_PORT);
+#define BFA_FCPORT_STATS_TOV	1000
 
-	if (!msg) {
-		port->stats_qfull = BFA_TRUE;
-		bfa_reqq_winit(&port->stats_reqq_wait, bfa_port_stats_clear,
-			       port);
-		bfa_reqq_wait(port->bfa, BFA_REQQ_PORT, &port->stats_reqq_wait);
-		return;
-	}
-	port->stats_qfull = BFA_FALSE;
-
-	bfa_os_memset(msg, 0, sizeof(bfi_pport_clear_stats_req_t));
-	bfi_h2i_set(msg->mh, BFI_MC_FC_PORT, BFI_PPORT_H2I_CLEAR_STATS_REQ,
-		    bfa_lpuid(port->bfa));
-	bfa_reqq_produce(port->bfa, BFA_REQQ_PORT);
-	return;
-}
-
-static void
-bfa_port_qos_stats_clear(void *cbarg)
+/**
+ * Fetch port attributes (FCQoS or FCoE).
+ */
+bfa_status_t
+bfa_fcport_get_stats(struct bfa_s *bfa, union bfa_fcport_stats_u *stats,
+		    bfa_cb_pport_t cbfn, void *cbarg)
 {
-	struct bfa_pport_s *port = (struct bfa_pport_s *)cbarg;
-	bfi_pport_clear_qos_stats_req_t *msg;
-
-	msg = bfa_reqq_next(port->bfa, BFA_REQQ_PORT);
+	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
 
-	if (!msg) {
-		port->stats_qfull = BFA_TRUE;
-		bfa_reqq_winit(&port->stats_reqq_wait, bfa_port_qos_stats_clear,
-			       port);
-		bfa_reqq_wait(port->bfa, BFA_REQQ_PORT, &port->stats_reqq_wait);
-		return;
+	if (fcport->stats_busy) {
+		bfa_trc(bfa, fcport->stats_busy);
+		return BFA_STATUS_DEVBUSY;
 	}
-	port->stats_qfull = BFA_FALSE;
 
-	bfa_os_memset(msg, 0, sizeof(bfi_pport_clear_qos_stats_req_t));
-	bfi_h2i_set(msg->mh, BFI_MC_FC_PORT, BFI_PPORT_H2I_CLEAR_QOS_STATS_REQ,
-		    bfa_lpuid(port->bfa));
-	bfa_reqq_produce(port->bfa, BFA_REQQ_PORT);
-	return;
-}
-
-static void
-bfa_pport_stats_swap(union bfa_pport_stats_u *d, union bfa_pport_stats_u *s)
-{
-	u32       *dip = (u32 *) d;
-	u32       *sip = (u32 *) s;
-	int             i;
+	fcport->stats_busy  = BFA_TRUE;
+	fcport->stats_ret   = stats;
+	fcport->stats_cbfn  = cbfn;
+	fcport->stats_cbarg = cbarg;
 
-	/*
-	 * Do 64 bit fields swap first
-	 */
-	for (i = 0;
-	     i <
-	     ((sizeof(union bfa_pport_stats_u) -
-	       sizeof(struct bfa_qos_stats_s)) / sizeof(u32)); i = i + 2) {
-#ifdef __BIGENDIAN
-		dip[i] = bfa_os_ntohl(sip[i]);
-		dip[i + 1] = bfa_os_ntohl(sip[i + 1]);
-#else
-		dip[i] = bfa_os_ntohl(sip[i + 1]);
-		dip[i + 1] = bfa_os_ntohl(sip[i]);
-#endif
-	}
+	bfa_fcport_send_stats_get(fcport);
 
-	/*
-	 * Now swap the 32 bit fields
-	 */
-	for (; i < (sizeof(union bfa_pport_stats_u) / sizeof(u32)); ++i)
-		dip[i] = bfa_os_ntohl(sip[i]);
+	bfa_timer_start(bfa, &fcport->timer, bfa_fcport_stats_get_timeout,
+		fcport, BFA_FCPORT_STATS_TOV);
+	return BFA_STATUS_OK;
 }
 
-static void
-__bfa_cb_port_stats_clr(void *cbarg, bfa_boolean_t complete)
+/**
+ * Reset port statistics (FCQoS or FCoE).
+ */
+bfa_status_t
+bfa_fcport_clear_stats(struct bfa_s *bfa, bfa_cb_pport_t cbfn, void *cbarg)
 {
-	struct bfa_pport_s *port = cbarg;
+	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
 
-	if (complete) {
-		port->stats_cbfn(port->stats_cbarg, port->stats_status);
-	} else {
-		port->stats_busy = BFA_FALSE;
-		port->stats_status = BFA_STATUS_OK;
+	if (fcport->stats_busy) {
+		bfa_trc(bfa, fcport->stats_busy);
+		return BFA_STATUS_DEVBUSY;
 	}
-}
-
-static void
-bfa_port_stats_clr_timeout(void *cbarg)
-{
-	struct bfa_pport_s *port = (struct bfa_pport_s *)cbarg;
 
-	bfa_trc(port->bfa, port->stats_qfull);
+	fcport->stats_busy = BFA_TRUE;
+	fcport->stats_cbfn = cbfn;
+	fcport->stats_cbarg = cbarg;
 
-	if (port->stats_qfull) {
-		bfa_reqq_wcancel(&port->stats_reqq_wait);
-		port->stats_qfull = BFA_FALSE;
-	}
+	bfa_fcport_send_stats_clear(fcport);
 
-	port->stats_status = BFA_STATUS_ETIMER;
-	bfa_cb_queue(port->bfa, &port->hcb_qe, __bfa_cb_port_stats_clr, port);
+	bfa_timer_start(bfa, &fcport->timer, bfa_fcport_stats_clr_timeout,
+			fcport, BFA_FCPORT_STATS_TOV);
+	return BFA_STATUS_OK;
 }
 
-static void
-__bfa_cb_port_stats(void *cbarg, bfa_boolean_t complete)
+/**
+ * Fetch FCQoS port statistics
+ */
+bfa_status_t
+bfa_fcport_get_qos_stats(struct bfa_s *bfa, union bfa_fcport_stats_u *stats,
+	bfa_cb_pport_t cbfn, void *cbarg)
 {
-	struct bfa_pport_s *port = cbarg;
+	/* Meaningful only for FC mode */
+	bfa_assert(bfa_ioc_get_fcmode(&bfa->ioc));
 
-	if (complete) {
-		if (port->stats_status == BFA_STATUS_OK)
-			bfa_pport_stats_swap(port->stats_ret, port->stats);
-		port->stats_cbfn(port->stats_cbarg, port->stats_status);
-	} else {
-		port->stats_busy = BFA_FALSE;
-		port->stats_status = BFA_STATUS_OK;
-	}
+	return bfa_fcport_get_stats(bfa, stats, cbfn, cbarg);
 }
 
-static void
-bfa_port_stats_timeout(void *cbarg)
+/**
+ * Reset FCoE port statistics
+ */
+bfa_status_t
+bfa_fcport_clear_qos_stats(struct bfa_s *bfa, bfa_cb_pport_t cbfn, void *cbarg)
 {
-	struct bfa_pport_s *port = (struct bfa_pport_s *)cbarg;
-
-	bfa_trc(port->bfa, port->stats_qfull);
+	/* Meaningful only for FC mode */
+	bfa_assert(bfa_ioc_get_fcmode(&bfa->ioc));
 
-	if (port->stats_qfull) {
-		bfa_reqq_wcancel(&port->stats_reqq_wait);
-		port->stats_qfull = BFA_FALSE;
-	}
-
-	port->stats_status = BFA_STATUS_ETIMER;
-	bfa_cb_queue(port->bfa, &port->hcb_qe, __bfa_cb_port_stats, port);
+	return bfa_fcport_clear_stats(bfa, cbfn, cbarg);
 }
 
-#define BFA_PORT_STATS_TOV	1000
-
 /**
- * Fetch port attributes.
+ * Fetch FCQoS port statistics
  */
 bfa_status_t
-bfa_pport_get_stats(struct bfa_s *bfa, union bfa_pport_stats_u *stats,
-		    bfa_cb_pport_t cbfn, void *cbarg)
+bfa_fcport_get_fcoe_stats(struct bfa_s *bfa, union bfa_fcport_stats_u *stats,
+	bfa_cb_pport_t cbfn, void *cbarg)
 {
-	struct bfa_pport_s *port = BFA_PORT_MOD(bfa);
-
-	if (port->stats_busy) {
-		bfa_trc(bfa, port->stats_busy);
-		return BFA_STATUS_DEVBUSY;
-	}
-
-	port->stats_busy = BFA_TRUE;
-	port->stats_ret = stats;
-	port->stats_cbfn = cbfn;
-	port->stats_cbarg = cbarg;
-
-	bfa_port_stats_query(port);
+	/* Meaningful only for FCoE mode */
+	bfa_assert(!bfa_ioc_get_fcmode(&bfa->ioc));
 
-	bfa_timer_start(bfa, &port->timer, bfa_port_stats_timeout, port,
-			BFA_PORT_STATS_TOV);
-	return BFA_STATUS_OK;
+	return bfa_fcport_get_stats(bfa, stats, cbfn, cbarg);
 }
 
+/**
+ * Reset FCoE port statistics
+ */
 bfa_status_t
-bfa_pport_clear_stats(struct bfa_s *bfa, bfa_cb_pport_t cbfn, void *cbarg)
+bfa_fcport_clear_fcoe_stats(struct bfa_s *bfa, bfa_cb_pport_t cbfn, void *cbarg)
 {
-	struct bfa_pport_s *port = BFA_PORT_MOD(bfa);
-
-	if (port->stats_busy) {
-		bfa_trc(bfa, port->stats_busy);
-		return BFA_STATUS_DEVBUSY;
-	}
-
-	port->stats_busy = BFA_TRUE;
-	port->stats_cbfn = cbfn;
-	port->stats_cbarg = cbarg;
-
-	bfa_port_stats_clear(port);
+	/* Meaningful only for FCoE mode */
+	bfa_assert(!bfa_ioc_get_fcmode(&bfa->ioc));
 
-	bfa_timer_start(bfa, &port->timer, bfa_port_stats_clr_timeout, port,
-			BFA_PORT_STATS_TOV);
-	return BFA_STATUS_OK;
+	return bfa_fcport_clear_stats(bfa, cbfn, cbarg);
 }
 
 bfa_status_t
-bfa_pport_trunk_enable(struct bfa_s *bfa, u8 bitmap)
+bfa_fcport_trunk_enable(struct bfa_s *bfa, u8 bitmap)
 {
-	struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
 
 	bfa_trc(bfa, bitmap);
-	bfa_trc(bfa, pport->cfg.trunked);
-	bfa_trc(bfa, pport->cfg.trunk_ports);
+	bfa_trc(bfa, fcport->cfg.trunked);
+	bfa_trc(bfa, fcport->cfg.trunk_ports);
 
 	if (!bitmap || (bitmap & (bitmap - 1)))
 		return BFA_STATUS_EINVAL;
 
-	pport->cfg.trunked = BFA_TRUE;
-	pport->cfg.trunk_ports = bitmap;
+	fcport->cfg.trunked = BFA_TRUE;
+	fcport->cfg.trunk_ports = bitmap;
 
 	return BFA_STATUS_OK;
 }
 
 void
-bfa_pport_qos_get_attr(struct bfa_s *bfa, struct bfa_qos_attr_s *qos_attr)
+bfa_fcport_qos_get_attr(struct bfa_s *bfa, struct bfa_qos_attr_s *qos_attr)
 {
-	struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
 
-	qos_attr->state = bfa_os_ntohl(pport->qos_attr.state);
-	qos_attr->total_bb_cr = bfa_os_ntohl(pport->qos_attr.total_bb_cr);
+	qos_attr->state = bfa_os_ntohl(fcport->qos_attr.state);
+	qos_attr->total_bb_cr = bfa_os_ntohl(fcport->qos_attr.total_bb_cr);
 }
 
 void
-bfa_pport_qos_get_vc_attr(struct bfa_s *bfa,
+bfa_fcport_qos_get_vc_attr(struct bfa_s *bfa,
 			  struct bfa_qos_vc_attr_s *qos_vc_attr)
 {
-	struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
-	struct bfa_qos_vc_attr_s *bfa_vc_attr = &pport->qos_vc_attr;
+	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
+	struct bfa_qos_vc_attr_s *bfa_vc_attr = &fcport->qos_vc_attr;
 	u32        i = 0;
 
 	qos_vc_attr->total_vc_count = bfa_os_ntohs(bfa_vc_attr->total_vc_count);
@@ -1503,119 +1754,89 @@ bfa_pport_qos_get_vc_attr(struct bfa_s *bfa,
 }
 
 /**
- * Fetch QoS Stats.
- */
-bfa_status_t
-bfa_pport_get_qos_stats(struct bfa_s *bfa, union bfa_pport_stats_u *stats,
-			bfa_cb_pport_t cbfn, void *cbarg)
-{
-	/*
-	 * QoS stats is embedded in port stats
-	 */
-	return bfa_pport_get_stats(bfa, stats, cbfn, cbarg);
-}
-
-bfa_status_t
-bfa_pport_clear_qos_stats(struct bfa_s *bfa, bfa_cb_pport_t cbfn, void *cbarg)
-{
-	struct bfa_pport_s *port = BFA_PORT_MOD(bfa);
-
-	if (port->stats_busy) {
-		bfa_trc(bfa, port->stats_busy);
-		return BFA_STATUS_DEVBUSY;
-	}
-
-	port->stats_busy = BFA_TRUE;
-	port->stats_cbfn = cbfn;
-	port->stats_cbarg = cbarg;
-
-	bfa_port_qos_stats_clear(port);
-
-	bfa_timer_start(bfa, &port->timer, bfa_port_stats_clr_timeout, port,
-			BFA_PORT_STATS_TOV);
-	return BFA_STATUS_OK;
-}
-
-/**
  * Fetch port attributes.
  */
 bfa_status_t
-bfa_pport_trunk_disable(struct bfa_s *bfa)
+bfa_fcport_trunk_disable(struct bfa_s *bfa)
 {
 	return BFA_STATUS_OK;
 }
 
 bfa_boolean_t
-bfa_pport_trunk_query(struct bfa_s *bfa, u32 *bitmap)
+bfa_fcport_trunk_query(struct bfa_s *bfa, u32 *bitmap)
 {
-	struct bfa_pport_s *port = BFA_PORT_MOD(bfa);
+	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
 
-	*bitmap = port->cfg.trunk_ports;
-	return port->cfg.trunked;
+	*bitmap = fcport->cfg.trunk_ports;
+	return fcport->cfg.trunked;
 }
 
 bfa_boolean_t
-bfa_pport_is_disabled(struct bfa_s *bfa)
+bfa_fcport_is_disabled(struct bfa_s *bfa)
 {
-	struct bfa_pport_s *port = BFA_PORT_MOD(bfa);
+	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
 
-	return bfa_sm_to_state(hal_pport_sm_table, port->sm) ==
+	return bfa_sm_to_state(hal_pport_sm_table, fcport->sm) ==
 		BFA_PPORT_ST_DISABLED;
 
 }
 
 bfa_boolean_t
-bfa_pport_is_ratelim(struct bfa_s *bfa)
+bfa_fcport_is_ratelim(struct bfa_s *bfa)
 {
-	struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
 
-	return pport->cfg.ratelimit ? BFA_TRUE : BFA_FALSE;
+	return fcport->cfg.ratelimit ? BFA_TRUE : BFA_FALSE;
 
 }
 
 void
-bfa_pport_cfg_qos(struct bfa_s *bfa, bfa_boolean_t on_off)
+bfa_fcport_cfg_qos(struct bfa_s *bfa, bfa_boolean_t on_off)
 {
-	struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
+	enum bfa_ioc_type_e ioc_type = bfa_get_type(bfa);
 
 	bfa_trc(bfa, on_off);
-	bfa_trc(bfa, pport->cfg.qos_enabled);
+	bfa_trc(bfa, fcport->cfg.qos_enabled);
+
+	bfa_trc(bfa, ioc_type);
 
-	pport->cfg.qos_enabled = on_off;
+	if (ioc_type == BFA_IOC_TYPE_FC)
+		fcport->cfg.qos_enabled = on_off;
 }
 
 void
-bfa_pport_cfg_ratelim(struct bfa_s *bfa, bfa_boolean_t on_off)
+bfa_fcport_cfg_ratelim(struct bfa_s *bfa, bfa_boolean_t on_off)
 {
-	struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
 
 	bfa_trc(bfa, on_off);
-	bfa_trc(bfa, pport->cfg.ratelimit);
+	bfa_trc(bfa, fcport->cfg.ratelimit);
 
-	pport->cfg.ratelimit = on_off;
-	if (pport->cfg.trl_def_speed == BFA_PPORT_SPEED_UNKNOWN)
-		pport->cfg.trl_def_speed = BFA_PPORT_SPEED_1GBPS;
+	fcport->cfg.ratelimit = on_off;
+	if (fcport->cfg.trl_def_speed == BFA_PPORT_SPEED_UNKNOWN)
+		fcport->cfg.trl_def_speed = BFA_PPORT_SPEED_1GBPS;
 }
 
 /**
  * Configure default minimum ratelim speed
  */
 bfa_status_t
-bfa_pport_cfg_ratelim_speed(struct bfa_s *bfa, enum bfa_pport_speed speed)
+bfa_fcport_cfg_ratelim_speed(struct bfa_s *bfa, enum bfa_pport_speed speed)
 {
-	struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
 
 	bfa_trc(bfa, speed);
 
 	/*
 	 * Auto and speeds greater than the supported speed, are invalid
 	 */
-	if ((speed == BFA_PPORT_SPEED_AUTO) || (speed > pport->speed_sup)) {
-		bfa_trc(bfa, pport->speed_sup);
+	if ((speed == BFA_PPORT_SPEED_AUTO) || (speed > fcport->speed_sup)) {
+		bfa_trc(bfa, fcport->speed_sup);
 		return BFA_STATUS_UNSUPP_SPEED;
 	}
 
-	pport->cfg.trl_def_speed = speed;
+	fcport->cfg.trl_def_speed = speed;
 
 	return BFA_STATUS_OK;
 }
@@ -1624,45 +1845,45 @@ bfa_pport_cfg_ratelim_speed(struct bfa_s *bfa, enum bfa_pport_speed speed)
  * Get default minimum ratelim speed
  */
 enum bfa_pport_speed
-bfa_pport_get_ratelim_speed(struct bfa_s *bfa)
+bfa_fcport_get_ratelim_speed(struct bfa_s *bfa)
 {
-	struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
 
-	bfa_trc(bfa, pport->cfg.trl_def_speed);
-	return pport->cfg.trl_def_speed;
+	bfa_trc(bfa, fcport->cfg.trl_def_speed);
+	return fcport->cfg.trl_def_speed;
 
 }
 
 void
-bfa_pport_busy(struct bfa_s *bfa, bfa_boolean_t status)
+bfa_fcport_busy(struct bfa_s *bfa, bfa_boolean_t status)
 {
-	struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
 
 	bfa_trc(bfa, status);
-	bfa_trc(bfa, pport->diag_busy);
+	bfa_trc(bfa, fcport->diag_busy);
 
-	pport->diag_busy = status;
+	fcport->diag_busy = status;
 }
 
 void
-bfa_pport_beacon(struct bfa_s *bfa, bfa_boolean_t beacon,
+bfa_fcport_beacon(struct bfa_s *bfa, bfa_boolean_t beacon,
 		 bfa_boolean_t link_e2e_beacon)
 {
-	struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
 
 	bfa_trc(bfa, beacon);
 	bfa_trc(bfa, link_e2e_beacon);
-	bfa_trc(bfa, pport->beacon);
-	bfa_trc(bfa, pport->link_e2e_beacon);
+	bfa_trc(bfa, fcport->beacon);
+	bfa_trc(bfa, fcport->link_e2e_beacon);
 
-	pport->beacon = beacon;
-	pport->link_e2e_beacon = link_e2e_beacon;
+	fcport->beacon = beacon;
+	fcport->link_e2e_beacon = link_e2e_beacon;
 }
 
 bfa_boolean_t
-bfa_pport_is_linkup(struct bfa_s *bfa)
+bfa_fcport_is_linkup(struct bfa_s *bfa)
 {
-	return bfa_sm_cmp_state(BFA_PORT_MOD(bfa), bfa_pport_sm_linkup);
+	return bfa_sm_cmp_state(BFA_FCPORT_MOD(bfa), bfa_fcport_sm_linkup);
 }
 
 
diff --git a/drivers/scsi/bfa/bfa_fcs.c b/drivers/scsi/bfa/bfa_fcs.c
index 7cb39a306ea9..3516172c597c 100644
--- a/drivers/scsi/bfa/bfa_fcs.c
+++ b/drivers/scsi/bfa/bfa_fcs.c
@@ -36,6 +36,7 @@
  * FCS sub-modules
  */
 struct bfa_fcs_mod_s {
+	void		(*attach) (struct bfa_fcs_s *fcs);
 	void            (*modinit) (struct bfa_fcs_s *fcs);
 	void            (*modexit) (struct bfa_fcs_s *fcs);
 };
@@ -43,12 +44,10 @@ struct bfa_fcs_mod_s {
 #define BFA_FCS_MODULE(_mod) { _mod ## _modinit, _mod ## _modexit }
 
 static struct bfa_fcs_mod_s fcs_modules[] = {
-	BFA_FCS_MODULE(bfa_fcs_pport),
-	BFA_FCS_MODULE(bfa_fcs_uf),
-	BFA_FCS_MODULE(bfa_fcs_fabric),
-	BFA_FCS_MODULE(bfa_fcs_vport),
-	BFA_FCS_MODULE(bfa_fcs_rport),
-	BFA_FCS_MODULE(bfa_fcs_fcpim),
+	{ bfa_fcs_pport_attach, NULL, NULL },
+	{ bfa_fcs_uf_attach, NULL, NULL },
+	{ bfa_fcs_fabric_attach, bfa_fcs_fabric_modinit,
+	 bfa_fcs_fabric_modexit },
 };
 
 /**
@@ -71,16 +70,10 @@ bfa_fcs_exit_comp(void *fcs_cbarg)
  */
 
 /**
- * 		FCS instance initialization.
- *
- * 	param[in]		fcs		FCS instance
- * 	param[in]		bfa		BFA instance
- * 	param[in]		bfad		BFA driver instance
- *
- * 	return None
+ * fcs attach -- called once to initialize data structures at driver attach time
  */
 void
-bfa_fcs_init(struct bfa_fcs_s *fcs, struct bfa_s *bfa, struct bfad_s *bfad,
+bfa_fcs_attach(struct bfa_fcs_s *fcs, struct bfa_s *bfa, struct bfad_s *bfad,
 			bfa_boolean_t min_cfg)
 {
 	int             i;
@@ -95,7 +88,24 @@ bfa_fcs_init(struct bfa_fcs_s *fcs, struct bfa_s *bfa, struct bfad_s *bfad,
 
 	for (i = 0; i < sizeof(fcs_modules) / sizeof(fcs_modules[0]); i++) {
 		mod = &fcs_modules[i];
-		mod->modinit(fcs);
+		if (mod->attach)
+			mod->attach(fcs);
+	}
+}
+
+/**
+ * fcs initialization, called once after bfa initialization is complete
+ */
+void
+bfa_fcs_init(struct bfa_fcs_s *fcs)
+{
+	int             i;
+	struct bfa_fcs_mod_s  *mod;
+
+	for (i = 0; i < sizeof(fcs_modules) / sizeof(fcs_modules[0]); i++) {
+		mod = &fcs_modules[i];
+		if (mod->modinit)
+			mod->modinit(fcs);
 	}
 }
 
@@ -127,6 +137,23 @@ bfa_fcs_driver_info_init(struct bfa_fcs_s *fcs,
 }
 
 /**
+ *      @brief
+ *              FCS FDMI Driver Parameter Initialization
+ *
+ *      @param[in]              fcs             FCS instance
+ *      @param[in]              fdmi_enable     TRUE/FALSE
+ *
+ *      @return None
+ */
+void
+bfa_fcs_set_fdmi_param(struct bfa_fcs_s *fcs, bfa_boolean_t fdmi_enable)
+{
+
+	fcs->fdmi_enabled = fdmi_enable;
+
+}
+
+/**
  * 		FCS instance cleanup and exit.
  *
  * 	param[in]		fcs			FCS instance
@@ -143,10 +170,12 @@ bfa_fcs_exit(struct bfa_fcs_s *fcs)
 	nmods = sizeof(fcs_modules) / sizeof(fcs_modules[0]);
 
 	for (i = 0; i < nmods; i++) {
-		bfa_wc_up(&fcs->wc);
 
 		mod = &fcs_modules[i];
-		mod->modexit(fcs);
+		if (mod->modexit) {
+			bfa_wc_up(&fcs->wc);
+			mod->modexit(fcs);
+		}
 	}
 
 	bfa_wc_wait(&fcs->wc);
diff --git a/drivers/scsi/bfa/bfa_fcs_lport.c b/drivers/scsi/bfa/bfa_fcs_lport.c
index c7ab257f10a7..7c1251c682d8 100644
--- a/drivers/scsi/bfa/bfa_fcs_lport.c
+++ b/drivers/scsi/bfa/bfa_fcs_lport.c
@@ -114,7 +114,7 @@ bfa_fcs_port_sm_uninit(struct bfa_fcs_port_s *port,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(port->fcs, event);
 	}
 }
 
@@ -136,7 +136,7 @@ bfa_fcs_port_sm_init(struct bfa_fcs_port_s *port, enum bfa_fcs_port_event event)
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(port->fcs, event);
 	}
 }
 
@@ -176,7 +176,7 @@ bfa_fcs_port_sm_online(struct bfa_fcs_port_s *port,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(port->fcs, event);
 	}
 }
 
@@ -214,7 +214,7 @@ bfa_fcs_port_sm_offline(struct bfa_fcs_port_s *port,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(port->fcs, event);
 	}
 }
 
@@ -234,7 +234,7 @@ bfa_fcs_port_sm_deleting(struct bfa_fcs_port_s *port,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(port->fcs, event);
 	}
 }
 
@@ -263,30 +263,8 @@ bfa_fcs_port_aen_post(struct bfa_fcs_port_s *port,
 
 	bfa_assert(role <= BFA_PORT_ROLE_FCP_MAX);
 
-	switch (event) {
-	case BFA_LPORT_AEN_ONLINE:
-		bfa_log(logmod, BFA_AEN_LPORT_ONLINE, lpwwn_ptr,
-			role_str[role / 2]);
-		break;
-	case BFA_LPORT_AEN_OFFLINE:
-		bfa_log(logmod, BFA_AEN_LPORT_OFFLINE, lpwwn_ptr,
-			role_str[role / 2]);
-		break;
-	case BFA_LPORT_AEN_NEW:
-		bfa_log(logmod, BFA_AEN_LPORT_NEW, lpwwn_ptr,
-			role_str[role / 2]);
-		break;
-	case BFA_LPORT_AEN_DELETE:
-		bfa_log(logmod, BFA_AEN_LPORT_DELETE, lpwwn_ptr,
-			role_str[role / 2]);
-		break;
-	case BFA_LPORT_AEN_DISCONNECT:
-		bfa_log(logmod, BFA_AEN_LPORT_DISCONNECT, lpwwn_ptr,
-			role_str[role / 2]);
-		break;
-	default:
-		break;
-	}
+	bfa_log(logmod, BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, event), lpwwn_ptr,
+		role_str[role/2]);
 
 	aen_data.lport.vf_id = port->fabric->vf_id;
 	aen_data.lport.roles = role;
@@ -873,36 +851,46 @@ bfa_fcs_port_is_online(struct bfa_fcs_port_s *port)
 }
 
 /**
- * Logical port initialization of base or virtual port.
- * Called by fabric for base port or by vport for virtual ports.
+ * Attach time initialization of logical ports.
  */
 void
-bfa_fcs_lport_init(struct bfa_fcs_port_s *lport, struct bfa_fcs_s *fcs,
-		   u16 vf_id, struct bfa_port_cfg_s *port_cfg,
-		   struct bfa_fcs_vport_s *vport)
+bfa_fcs_lport_attach(struct bfa_fcs_port_s *lport, struct bfa_fcs_s *fcs,
+		uint16_t vf_id, struct bfa_fcs_vport_s *vport)
 {
 	lport->fcs = fcs;
 	lport->fabric = bfa_fcs_vf_lookup(fcs, vf_id);
-	bfa_os_assign(lport->port_cfg, *port_cfg);
 	lport->vport = vport;
 	lport->lp_tag = (vport) ? bfa_lps_get_tag(vport->lps) :
 			 bfa_lps_get_tag(lport->fabric->lps);
 
 	INIT_LIST_HEAD(&lport->rport_q);
 	lport->num_rports = 0;
+}
+
+/**
+ * Logical port initialization of base or virtual port.
+ * Called by fabric for base port or by vport for virtual ports.
+ */
 
-	lport->bfad_port =
-		bfa_fcb_port_new(fcs->bfad, lport, lport->port_cfg.roles,
+void
+bfa_fcs_lport_init(struct bfa_fcs_port_s *lport,
+		struct bfa_port_cfg_s *port_cfg)
+{
+	struct bfa_fcs_vport_s *vport = lport->vport;
+
+	bfa_os_assign(lport->port_cfg, *port_cfg);
+
+	lport->bfad_port = bfa_fcb_port_new(lport->fcs->bfad, lport,
+				lport->port_cfg.roles,
 				lport->fabric->vf_drv,
 				vport ? vport->vport_drv : NULL);
+
 	bfa_fcs_port_aen_post(lport, BFA_LPORT_AEN_NEW);
 
 	bfa_sm_set_state(lport, bfa_fcs_port_sm_uninit);
 	bfa_sm_send_event(lport, BFA_FCS_PORT_SM_CREATE);
 }
 
-
-
 /**
  *  fcs_lport_api
  */
@@ -921,13 +909,20 @@ bfa_fcs_port_get_attr(struct bfa_fcs_port_s *port,
 	if (port->fabric) {
 		port_attr->port_type = bfa_fcs_fabric_port_type(port->fabric);
 		port_attr->loopback = bfa_fcs_fabric_is_loopback(port->fabric);
+		port_attr->authfail =
+				bfa_fcs_fabric_is_auth_failed(port->fabric);
 		port_attr->fabric_name = bfa_fcs_port_get_fabric_name(port);
 		memcpy(port_attr->fabric_ip_addr,
 		       bfa_fcs_port_get_fabric_ipaddr(port),
 		       BFA_FCS_FABRIC_IPADDR_SZ);
 
-		if (port->vport != NULL)
+		if (port->vport != NULL) {
 			port_attr->port_type = BFA_PPORT_TYPE_VPORT;
+			port_attr->fpma_mac =
+				bfa_lps_get_lp_mac(port->vport->lps);
+		} else
+			port_attr->fpma_mac =
+				bfa_lps_get_lp_mac(port->fabric->lps);
 
 	} else {
 		port_attr->port_type = BFA_PPORT_TYPE_UNKNOWN;
diff --git a/drivers/scsi/bfa/bfa_fcs_port.c b/drivers/scsi/bfa/bfa_fcs_port.c
index 9c4b24e62de1..3c27788cd527 100644
--- a/drivers/scsi/bfa/bfa_fcs_port.c
+++ b/drivers/scsi/bfa/bfa_fcs_port.c
@@ -55,14 +55,7 @@ bfa_fcs_pport_event_handler(void *cbarg, bfa_pport_event_t event)
 }
 
 void
-bfa_fcs_pport_modinit(struct bfa_fcs_s *fcs)
+bfa_fcs_pport_attach(struct bfa_fcs_s *fcs)
 {
-	bfa_pport_event_register(fcs->bfa, bfa_fcs_pport_event_handler,
-				     fcs);
-}
-
-void
-bfa_fcs_pport_modexit(struct bfa_fcs_s *fcs)
-{
-	bfa_fcs_modexit_comp(fcs);
+	bfa_fcport_event_register(fcs->bfa, bfa_fcs_pport_event_handler, fcs);
 }
diff --git a/drivers/scsi/bfa/bfa_fcs_uf.c b/drivers/scsi/bfa/bfa_fcs_uf.c
index ad01db6444b2..3d57d48bbae4 100644
--- a/drivers/scsi/bfa/bfa_fcs_uf.c
+++ b/drivers/scsi/bfa/bfa_fcs_uf.c
@@ -93,13 +93,7 @@ bfa_fcs_uf_recv(void *cbarg, struct bfa_uf_s *uf)
 }
 
 void
-bfa_fcs_uf_modinit(struct bfa_fcs_s *fcs)
+bfa_fcs_uf_attach(struct bfa_fcs_s *fcs)
 {
 	bfa_uf_recv_register(fcs->bfa, bfa_fcs_uf_recv, fcs);
 }
-
-void
-bfa_fcs_uf_modexit(struct bfa_fcs_s *fcs)
-{
-	bfa_fcs_modexit_comp(fcs);
-}
diff --git a/drivers/scsi/bfa/bfa_hw_cb.c b/drivers/scsi/bfa/bfa_hw_cb.c
index ede1438619e2..871a4e28575c 100644
--- a/drivers/scsi/bfa/bfa_hw_cb.c
+++ b/drivers/scsi/bfa/bfa_hw_cb.c
@@ -53,6 +53,18 @@ bfa_hwcb_reginit(struct bfa_s *bfa)
 }
 
 void
+bfa_hwcb_reqq_ack(struct bfa_s *bfa, int reqq)
+{
+}
+
+static void
+bfa_hwcb_reqq_ack_msix(struct bfa_s *bfa, int reqq)
+{
+	bfa_reg_write(bfa->iocfc.bfa_regs.intr_status,
+		__HFN_INT_CPE_Q0 << CPE_Q_NUM(bfa_ioc_pcifn(&bfa->ioc), reqq));
+}
+
+void
 bfa_hwcb_rspq_ack(struct bfa_s *bfa, int rspq)
 {
 }
@@ -136,6 +148,7 @@ bfa_hwcb_msix_uninstall(struct bfa_s *bfa)
 void
 bfa_hwcb_isr_mode_set(struct bfa_s *bfa, bfa_boolean_t msix)
 {
+	bfa->iocfc.hwif.hw_reqq_ack = bfa_hwcb_reqq_ack_msix;
 	bfa->iocfc.hwif.hw_rspq_ack = bfa_hwcb_rspq_ack_msix;
 }
 
diff --git a/drivers/scsi/bfa/bfa_hw_ct.c b/drivers/scsi/bfa/bfa_hw_ct.c
index 51ae5740e6e9..76ceb9a4bf2f 100644
--- a/drivers/scsi/bfa/bfa_hw_ct.c
+++ b/drivers/scsi/bfa/bfa_hw_ct.c
@@ -85,6 +85,15 @@ bfa_hwct_reginit(struct bfa_s *bfa)
 }
 
 void
+bfa_hwct_reqq_ack(struct bfa_s *bfa, int reqq)
+{
+	u32 r32;
+
+	r32 = bfa_reg_read(bfa->iocfc.bfa_regs.cpe_q_ctrl[reqq]);
+	bfa_reg_write(bfa->iocfc.bfa_regs.cpe_q_ctrl[reqq], r32);
+}
+
+void
 bfa_hwct_rspq_ack(struct bfa_s *bfa, int rspq)
 {
 	u32	r32;
diff --git a/drivers/scsi/bfa/bfa_intr.c b/drivers/scsi/bfa/bfa_intr.c
index b36540e4ed76..0eba3f930d5b 100644
--- a/drivers/scsi/bfa/bfa_intr.c
+++ b/drivers/scsi/bfa/bfa_intr.c
@@ -15,7 +15,7 @@
  * General Public License for more details.
  */
 #include <bfa.h>
-#include <bfi/bfi_cbreg.h>
+#include <bfi/bfi_ctreg.h>
 #include <bfa_port_priv.h>
 #include <bfa_intr_priv.h>
 #include <cs/bfa_debug.h>
@@ -34,6 +34,26 @@ bfa_msix_lpu(struct bfa_s *bfa)
 	bfa_ioc_mbox_isr(&bfa->ioc);
 }
 
+static void
+bfa_reqq_resume(struct bfa_s *bfa, int qid)
+{
+	struct list_head *waitq, *qe, *qen;
+	struct bfa_reqq_wait_s *wqe;
+
+	waitq = bfa_reqq(bfa, qid);
+	list_for_each_safe(qe, qen, waitq) {
+		/**
+		 * Callback only as long as there is room in request queue
+		 */
+		if (bfa_reqq_full(bfa, qid))
+			break;
+
+		list_del(qe);
+		wqe = (struct bfa_reqq_wait_s *) qe;
+		wqe->qresume(wqe->cbarg);
+	}
+}
+
 void
 bfa_msix_all(struct bfa_s *bfa, int vec)
 {
@@ -96,7 +116,8 @@ bfa_isr_enable(struct bfa_s *bfa)
 
 	bfa_msix_install(bfa);
 	intr_unmask = (__HFN_INT_ERR_EMC | __HFN_INT_ERR_LPU0 |
-		       __HFN_INT_ERR_LPU1 | __HFN_INT_ERR_PSS);
+		       __HFN_INT_ERR_LPU1 | __HFN_INT_ERR_PSS |
+		       __HFN_INT_LL_HALT);
 
 	if (pci_func == 0)
 		intr_unmask |= (__HFN_INT_CPE_Q0 | __HFN_INT_CPE_Q1 |
@@ -127,23 +148,18 @@ bfa_isr_disable(struct bfa_s *bfa)
 void
 bfa_msix_reqq(struct bfa_s *bfa, int qid)
 {
-	struct list_head 		*waitq, *qe, *qen;
-	struct bfa_reqq_wait_s	*wqe;
+	struct list_head *waitq;
 
 	qid &= (BFI_IOC_MAX_CQS - 1);
 
-	waitq = bfa_reqq(bfa, qid);
-	list_for_each_safe(qe, qen, waitq) {
-		/**
-		 * Callback only as long as there is room in request queue
-		 */
-		if (bfa_reqq_full(bfa, qid))
-			break;
+	bfa->iocfc.hwif.hw_reqq_ack(bfa, qid);
 
-		list_del(qe);
-		wqe = (struct bfa_reqq_wait_s *) qe;
-		wqe->qresume(wqe->cbarg);
-	}
+	/**
+	 * Resume any pending requests in the corresponding reqq.
+	 */
+	waitq = bfa_reqq(bfa, qid);
+	if (!list_empty(waitq))
+		bfa_reqq_resume(bfa, qid);
 }
 
 void
@@ -157,26 +173,27 @@ bfa_isr_unhandled(struct bfa_s *bfa, struct bfi_msg_s *m)
 }
 
 void
-bfa_msix_rspq(struct bfa_s *bfa, int rsp_qid)
+bfa_msix_rspq(struct bfa_s *bfa, int qid)
 {
-	struct bfi_msg_s      *m;
-	u32        pi, ci;
+	struct bfi_msg_s *m;
+	u32 pi, ci;
+	struct list_head *waitq;
 
-	bfa_trc_fp(bfa, rsp_qid);
+	bfa_trc_fp(bfa, qid);
 
-	rsp_qid &= (BFI_IOC_MAX_CQS - 1);
+	qid &= (BFI_IOC_MAX_CQS - 1);
 
-	bfa->iocfc.hwif.hw_rspq_ack(bfa, rsp_qid);
+	bfa->iocfc.hwif.hw_rspq_ack(bfa, qid);
 
-	ci = bfa_rspq_ci(bfa, rsp_qid);
-	pi = bfa_rspq_pi(bfa, rsp_qid);
+	ci = bfa_rspq_ci(bfa, qid);
+	pi = bfa_rspq_pi(bfa, qid);
 
 	bfa_trc_fp(bfa, ci);
 	bfa_trc_fp(bfa, pi);
 
 	if (bfa->rme_process) {
 		while (ci != pi) {
-			m = bfa_rspq_elem(bfa, rsp_qid, ci);
+			m = bfa_rspq_elem(bfa, qid, ci);
 			bfa_assert_fp(m->mhdr.msg_class < BFI_MC_MAX);
 
 			bfa_isrs[m->mhdr.msg_class] (bfa, m);
@@ -188,25 +205,59 @@ bfa_msix_rspq(struct bfa_s *bfa, int rsp_qid)
 	/**
 	 * update CI
 	 */
-	bfa_rspq_ci(bfa, rsp_qid) = pi;
-	bfa_reg_write(bfa->iocfc.bfa_regs.rme_q_ci[rsp_qid], pi);
+	bfa_rspq_ci(bfa, qid) = pi;
+	bfa_reg_write(bfa->iocfc.bfa_regs.rme_q_ci[qid], pi);
 	bfa_os_mmiowb();
+
+	/**
+	 * Resume any pending requests in the corresponding reqq.
+	 */
+	waitq = bfa_reqq(bfa, qid);
+	if (!list_empty(waitq))
+		bfa_reqq_resume(bfa, qid);
 }
 
 void
 bfa_msix_lpu_err(struct bfa_s *bfa, int vec)
 {
-	u32 intr;
+	u32 intr, curr_value;
 
 	intr = bfa_reg_read(bfa->iocfc.bfa_regs.intr_status);
 
 	if (intr & (__HFN_INT_MBOX_LPU0 | __HFN_INT_MBOX_LPU1))
 		bfa_msix_lpu(bfa);
 
-	if (intr & (__HFN_INT_ERR_EMC |
-		    __HFN_INT_ERR_LPU0 | __HFN_INT_ERR_LPU1 |
-		    __HFN_INT_ERR_PSS))
+	intr &= (__HFN_INT_ERR_EMC | __HFN_INT_ERR_LPU0 |
+		__HFN_INT_ERR_LPU1 | __HFN_INT_ERR_PSS | __HFN_INT_LL_HALT);
+
+	if (intr) {
+		if (intr & __HFN_INT_LL_HALT) {
+			/**
+			 * If LL_HALT bit is set then FW Init Halt LL Port
+			 * Register needs to be cleared as well so Interrupt
+			 * Status Register will be cleared.
+			 */
+			curr_value = bfa_reg_read(bfa->ioc.ioc_regs.ll_halt);
+			curr_value &= ~__FW_INIT_HALT_P;
+			bfa_reg_write(bfa->ioc.ioc_regs.ll_halt, curr_value);
+		}
+
+		if (intr & __HFN_INT_ERR_PSS) {
+			/**
+			 * ERR_PSS bit needs to be cleared as well in case
+			 * interrups are shared so driver's interrupt handler is
+			 * still called eventhough it is already masked out.
+			 */
+			curr_value = bfa_reg_read(
+				bfa->ioc.ioc_regs.pss_err_status_reg);
+			curr_value &= __PSS_ERR_STATUS_SET;
+			bfa_reg_write(bfa->ioc.ioc_regs.pss_err_status_reg,
+				curr_value);
+		}
+
+		bfa_reg_write(bfa->iocfc.bfa_regs.intr_status, intr);
 		bfa_msix_errint(bfa, intr);
+	}
 }
 
 void
diff --git a/drivers/scsi/bfa/bfa_ioc.c b/drivers/scsi/bfa/bfa_ioc.c
index 397d7e9eade5..e038bc9769f6 100644
--- a/drivers/scsi/bfa/bfa_ioc.c
+++ b/drivers/scsi/bfa/bfa_ioc.c
@@ -18,7 +18,7 @@
 #include <bfa.h>
 #include <bfa_ioc.h>
 #include <bfa_fwimg_priv.h>
-#include <bfa_trcmod_priv.h>
+#include <cna/bfa_cna_trcmod.h>
 #include <cs/bfa_debug.h>
 #include <bfi/bfi_ioc.h>
 #include <bfi/bfi_ctreg.h>
@@ -27,18 +27,17 @@
 #include <log/bfa_log_hal.h>
 #include <defs/bfa_defs_pci.h>
 
-BFA_TRC_FILE(HAL, IOC);
+BFA_TRC_FILE(CNA, IOC);
 
 /**
  * IOC local definitions
  */
 #define BFA_IOC_TOV		2000	/* msecs */
-#define BFA_IOC_HB_TOV		1000	/* msecs */
-#define BFA_IOC_HB_FAIL_MAX	4
-#define BFA_IOC_HWINIT_MAX	2
+#define BFA_IOC_HWSEM_TOV       500     /* msecs */
+#define BFA_IOC_HB_TOV          500     /* msecs */
+#define BFA_IOC_HWINIT_MAX      2
 #define BFA_IOC_FWIMG_MINSZ     (16 * 1024)
-#define BFA_IOC_TOV_RECOVER	(BFA_IOC_HB_FAIL_MAX * BFA_IOC_HB_TOV \
-				+ BFA_IOC_TOV)
+#define BFA_IOC_TOV_RECOVER      BFA_IOC_HB_TOV
 
 #define bfa_ioc_timer_start(__ioc)					\
 	bfa_timer_begin((__ioc)->timer_mod, &(__ioc)->ioc_timer,	\
@@ -51,12 +50,25 @@ BFA_TRC_FILE(HAL, IOC);
 	 (sizeof(struct bfa_trc_mod_s) -			\
 	  BFA_TRC_MAX * sizeof(struct bfa_trc_s)))
 #define BFA_DBG_FWTRC_OFF(_fn)	(BFI_IOC_TRC_OFF + BFA_DBG_FWTRC_LEN * (_fn))
-#define bfa_ioc_stats(_ioc, _stats)	((_ioc)->stats._stats++)
 
-#define BFA_FLASH_CHUNK_NO(off)         (off / BFI_FLASH_CHUNK_SZ_WORDS)
-#define BFA_FLASH_OFFSET_IN_CHUNK(off)  (off % BFI_FLASH_CHUNK_SZ_WORDS)
-#define BFA_FLASH_CHUNK_ADDR(chunkno)   (chunkno * BFI_FLASH_CHUNK_SZ_WORDS)
-bfa_boolean_t   bfa_auto_recover = BFA_FALSE;
+/**
+ * Asic specific macros : see bfa_hw_cb.c and bfa_hw_ct.c for details.
+ */
+
+#define bfa_ioc_firmware_lock(__ioc)                    \
+			((__ioc)->ioc_hwif->ioc_firmware_lock(__ioc))
+#define bfa_ioc_firmware_unlock(__ioc)                  \
+			((__ioc)->ioc_hwif->ioc_firmware_unlock(__ioc))
+#define bfa_ioc_fwimg_get_chunk(__ioc, __off)           \
+			((__ioc)->ioc_hwif->ioc_fwimg_get_chunk(__ioc, __off))
+#define bfa_ioc_fwimg_get_size(__ioc)                   \
+			((__ioc)->ioc_hwif->ioc_fwimg_get_size(__ioc))
+#define bfa_ioc_reg_init(__ioc) ((__ioc)->ioc_hwif->ioc_reg_init(__ioc))
+#define bfa_ioc_map_port(__ioc) ((__ioc)->ioc_hwif->ioc_map_port(__ioc))
+#define bfa_ioc_notify_hbfail(__ioc)                    \
+			((__ioc)->ioc_hwif->ioc_notify_hbfail(__ioc))
+
+bfa_boolean_t   bfa_auto_recover = BFA_TRUE;
 
 /*
  * forward declarations
@@ -64,7 +76,6 @@ bfa_boolean_t   bfa_auto_recover = BFA_FALSE;
 static void     bfa_ioc_aen_post(struct bfa_ioc_s *bfa,
 				 enum bfa_ioc_aen_event event);
 static void     bfa_ioc_hw_sem_get(struct bfa_ioc_s *ioc);
-static void     bfa_ioc_hw_sem_release(struct bfa_ioc_s *ioc);
 static void     bfa_ioc_hw_sem_get_cancel(struct bfa_ioc_s *ioc);
 static void     bfa_ioc_hwinit(struct bfa_ioc_s *ioc, bfa_boolean_t force);
 static void     bfa_ioc_timeout(void *ioc);
@@ -77,8 +88,6 @@ static void     bfa_ioc_reset(struct bfa_ioc_s *ioc, bfa_boolean_t force);
 static void     bfa_ioc_mbox_poll(struct bfa_ioc_s *ioc);
 static void     bfa_ioc_mbox_hbfail(struct bfa_ioc_s *ioc);
 static void     bfa_ioc_recover(struct bfa_ioc_s *ioc);
-static bfa_boolean_t bfa_ioc_firmware_lock(struct bfa_ioc_s *ioc);
-static void     bfa_ioc_firmware_unlock(struct bfa_ioc_s *ioc);
 static void     bfa_ioc_disable_comp(struct bfa_ioc_s *ioc);
 static void     bfa_ioc_lpu_stop(struct bfa_ioc_s *ioc);
 
@@ -508,14 +517,19 @@ bfa_ioc_sm_disabling(struct bfa_ioc_s *ioc, enum ioc_event event)
 	bfa_trc(ioc, event);
 
 	switch (event) {
-	case IOC_E_HWERROR:
 	case IOC_E_FWRSP_DISABLE:
 		bfa_ioc_timer_stop(ioc);
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_disabled);
+		break;
+
+	case IOC_E_HWERROR:
+		bfa_ioc_timer_stop(ioc);
 		/*
 		 * !!! fall through !!!
 		 */
 
 	case IOC_E_TIMEOUT:
+		bfa_reg_write(ioc->ioc_regs.ioc_fwstate, BFI_IOC_FAIL);
 		bfa_fsm_set_state(ioc, bfa_ioc_sm_disabled);
 		break;
 
@@ -608,15 +622,12 @@ bfa_ioc_sm_hbfail_entry(struct bfa_ioc_s *ioc)
 	 * Mark IOC as failed in hardware and stop firmware.
 	 */
 	bfa_ioc_lpu_stop(ioc);
-	bfa_reg_write(ioc->ioc_regs.ioc_fwstate, BFI_IOC_HBFAIL);
+	bfa_reg_write(ioc->ioc_regs.ioc_fwstate, BFI_IOC_FAIL);
 
-	if (ioc->pcidev.device_id == BFA_PCI_DEVICE_ID_CT) {
-		bfa_reg_write(ioc->ioc_regs.ll_halt, __FW_INIT_HALT_P);
-		/*
-		 * Wait for halt to take effect
-		 */
-		bfa_reg_read(ioc->ioc_regs.ll_halt);
-	}
+	/**
+	 * Notify other functions on HB failure.
+	 */
+	bfa_ioc_notify_hbfail(ioc);
 
 	/**
 	 * Notify driver and common modules registered for notification.
@@ -672,6 +683,12 @@ bfa_ioc_sm_hbfail(struct bfa_ioc_s *ioc, enum ioc_event event)
 		 */
 		break;
 
+	case IOC_E_HWERROR:
+		/*
+		 * HB failure notification, ignore.
+		 */
+		break;
+
 	default:
 		bfa_sm_fault(ioc, event);
 	}
@@ -700,7 +717,7 @@ bfa_ioc_disable_comp(struct bfa_ioc_s *ioc)
 	}
 }
 
-static void
+void
 bfa_ioc_sem_timeout(void *ioc_arg)
 {
 	struct bfa_ioc_s *ioc = (struct bfa_ioc_s *)ioc_arg;
@@ -708,26 +725,32 @@ bfa_ioc_sem_timeout(void *ioc_arg)
 	bfa_ioc_hw_sem_get(ioc);
 }
 
-static void
-bfa_ioc_usage_sem_get(struct bfa_ioc_s *ioc)
+bfa_boolean_t
+bfa_ioc_sem_get(bfa_os_addr_t sem_reg)
 {
-	u32        r32;
-	int             cnt = 0;
-#define BFA_SEM_SPINCNT	1000
+	u32 r32;
+	int cnt = 0;
+#define BFA_SEM_SPINCNT 3000
 
-	do {
-		r32 = bfa_reg_read(ioc->ioc_regs.ioc_usage_sem_reg);
+	r32 = bfa_reg_read(sem_reg);
+
+	while (r32 && (cnt < BFA_SEM_SPINCNT)) {
 		cnt++;
-		if (cnt > BFA_SEM_SPINCNT)
-			break;
-	} while (r32 != 0);
+		bfa_os_udelay(2);
+		r32 = bfa_reg_read(sem_reg);
+	}
+
+	if (r32 == 0)
+		return BFA_TRUE;
+
 	bfa_assert(cnt < BFA_SEM_SPINCNT);
+	return BFA_FALSE;
 }
 
-static void
-bfa_ioc_usage_sem_release(struct bfa_ioc_s *ioc)
+void
+bfa_ioc_sem_release(bfa_os_addr_t sem_reg)
 {
-	bfa_reg_write(ioc->ioc_regs.ioc_usage_sem_reg, 1);
+	bfa_reg_write(sem_reg, 1);
 }
 
 static void
@@ -737,7 +760,7 @@ bfa_ioc_hw_sem_get(struct bfa_ioc_s *ioc)
 
 	/**
 	 * First read to the semaphore register will return 0, subsequent reads
-	 * will return 1. Semaphore is released by writing 0 to the register
+	 * will return 1. Semaphore is released by writing 1 to the register
 	 */
 	r32 = bfa_reg_read(ioc->ioc_regs.ioc_sem_reg);
 	if (r32 == 0) {
@@ -746,10 +769,10 @@ bfa_ioc_hw_sem_get(struct bfa_ioc_s *ioc)
 	}
 
 	bfa_timer_begin(ioc->timer_mod, &ioc->sem_timer, bfa_ioc_sem_timeout,
-			ioc, BFA_IOC_TOV);
+			ioc, BFA_IOC_HWSEM_TOV);
 }
 
-static void
+void
 bfa_ioc_hw_sem_release(struct bfa_ioc_s *ioc)
 {
 	bfa_reg_write(ioc->ioc_regs.ioc_sem_reg, 1);
@@ -828,7 +851,7 @@ bfa_ioc_lpu_stop(struct bfa_ioc_s *ioc)
 /**
  * Get driver and firmware versions.
  */
-static void
+void
 bfa_ioc_fwver_get(struct bfa_ioc_s *ioc, struct bfi_ioc_image_hdr_s *fwhdr)
 {
 	u32        pgnum, pgoff;
@@ -847,24 +870,10 @@ bfa_ioc_fwver_get(struct bfa_ioc_s *ioc, struct bfi_ioc_image_hdr_s *fwhdr)
 	}
 }
 
-static u32 *
-bfa_ioc_fwimg_get_chunk(struct bfa_ioc_s *ioc, u32 off)
-{
-	if (ioc->ctdev)
-		return bfi_image_ct_get_chunk(off);
-	return bfi_image_cb_get_chunk(off);
-}
-
-static          u32
-bfa_ioc_fwimg_get_size(struct bfa_ioc_s *ioc)
-{
-return (ioc->ctdev) ? bfi_image_ct_size : bfi_image_cb_size;
-}
-
 /**
  * Returns TRUE if same.
  */
-static          bfa_boolean_t
+bfa_boolean_t
 bfa_ioc_fwver_cmp(struct bfa_ioc_s *ioc, struct bfi_ioc_image_hdr_s *fwhdr)
 {
 	struct bfi_ioc_image_hdr_s *drv_fwhdr;
@@ -921,95 +930,6 @@ bfa_ioc_fwver_valid(struct bfa_ioc_s *ioc)
 }
 
 /**
- * Return true if firmware of current driver matches the running firmware.
- */
-static          bfa_boolean_t
-bfa_ioc_firmware_lock(struct bfa_ioc_s *ioc)
-{
-	enum bfi_ioc_state ioc_fwstate;
-	u32        usecnt;
-	struct bfi_ioc_image_hdr_s fwhdr;
-
-	/**
-	 * Firmware match check is relevant only for CNA.
-	 */
-	if (!ioc->cna)
-		return BFA_TRUE;
-
-	/**
-	 * If bios boot (flash based) -- do not increment usage count
-	 */
-	if (bfa_ioc_fwimg_get_size(ioc) < BFA_IOC_FWIMG_MINSZ)
-		return BFA_TRUE;
-
-	bfa_ioc_usage_sem_get(ioc);
-	usecnt = bfa_reg_read(ioc->ioc_regs.ioc_usage_reg);
-
-	/**
-	 * If usage count is 0, always return TRUE.
-	 */
-	if (usecnt == 0) {
-		bfa_reg_write(ioc->ioc_regs.ioc_usage_reg, 1);
-		bfa_ioc_usage_sem_release(ioc);
-		bfa_trc(ioc, usecnt);
-		return BFA_TRUE;
-	}
-
-	ioc_fwstate = bfa_reg_read(ioc->ioc_regs.ioc_fwstate);
-	bfa_trc(ioc, ioc_fwstate);
-
-	/**
-	 * Use count cannot be non-zero and chip in uninitialized state.
-	 */
-	bfa_assert(ioc_fwstate != BFI_IOC_UNINIT);
-
-	/**
-	 * Check if another driver with a different firmware is active
-	 */
-	bfa_ioc_fwver_get(ioc, &fwhdr);
-	if (!bfa_ioc_fwver_cmp(ioc, &fwhdr)) {
-		bfa_ioc_usage_sem_release(ioc);
-		bfa_trc(ioc, usecnt);
-		return BFA_FALSE;
-	}
-
-	/**
-	 * Same firmware version. Increment the reference count.
-	 */
-	usecnt++;
-	bfa_reg_write(ioc->ioc_regs.ioc_usage_reg, usecnt);
-	bfa_ioc_usage_sem_release(ioc);
-	bfa_trc(ioc, usecnt);
-	return BFA_TRUE;
-}
-
-static void
-bfa_ioc_firmware_unlock(struct bfa_ioc_s *ioc)
-{
-	u32        usecnt;
-
-	/**
-	 * Firmware lock is relevant only for CNA.
-	 * If bios boot (flash based) -- do not decrement usage count
-	 */
-	if (!ioc->cna || (bfa_ioc_fwimg_get_size(ioc) < BFA_IOC_FWIMG_MINSZ))
-		return;
-
-	/**
-	 * decrement usage count
-	 */
-	bfa_ioc_usage_sem_get(ioc);
-	usecnt = bfa_reg_read(ioc->ioc_regs.ioc_usage_reg);
-	bfa_assert(usecnt > 0);
-
-	usecnt--;
-	bfa_reg_write(ioc->ioc_regs.ioc_usage_reg, usecnt);
-	bfa_trc(ioc, usecnt);
-
-	bfa_ioc_usage_sem_release(ioc);
-}
-
-/**
  * Conditionally flush any pending message from firmware at start.
  */
 static void
@@ -1152,33 +1072,27 @@ bfa_ioc_send_getattr(struct bfa_ioc_s *ioc)
 static void
 bfa_ioc_hb_check(void *cbarg)
 {
-	struct bfa_ioc_s *ioc = cbarg;
-	u32        hb_count;
+	struct bfa_ioc_s  *ioc = cbarg;
+	u32     hb_count;
 
 	hb_count = bfa_reg_read(ioc->ioc_regs.heartbeat);
 	if (ioc->hb_count == hb_count) {
-		ioc->hb_fail++;
-	} else {
-		ioc->hb_count = hb_count;
-		ioc->hb_fail = 0;
-	}
-
-	if (ioc->hb_fail >= BFA_IOC_HB_FAIL_MAX) {
-		bfa_log(ioc->logm, BFA_LOG_HAL_HEARTBEAT_FAILURE, hb_count);
-		ioc->hb_fail = 0;
+		bfa_log(ioc->logm, BFA_LOG_HAL_HEARTBEAT_FAILURE,
+			hb_count);
 		bfa_ioc_recover(ioc);
 		return;
+	} else {
+		ioc->hb_count = hb_count;
 	}
 
 	bfa_ioc_mbox_poll(ioc);
-	bfa_timer_begin(ioc->timer_mod, &ioc->ioc_timer, bfa_ioc_hb_check, ioc,
-			BFA_IOC_HB_TOV);
+	bfa_timer_begin(ioc->timer_mod, &ioc->ioc_timer, bfa_ioc_hb_check,
+			ioc, BFA_IOC_HB_TOV);
 }
 
 static void
 bfa_ioc_hb_monitor(struct bfa_ioc_s *ioc)
 {
-	ioc->hb_fail = 0;
 	ioc->hb_count = bfa_reg_read(ioc->ioc_regs.heartbeat);
 	bfa_timer_begin(ioc->timer_mod, &ioc->ioc_timer, bfa_ioc_hb_check, ioc,
 			BFA_IOC_HB_TOV);
@@ -1191,112 +1105,6 @@ bfa_ioc_hb_stop(struct bfa_ioc_s *ioc)
 }
 
 /**
- * Host to LPU mailbox message addresses
- */
-static struct {
-	u32        hfn_mbox, lpu_mbox, hfn_pgn;
-} iocreg_fnreg[] = {
-	{
-	HOSTFN0_LPU_MBOX0_0, LPU_HOSTFN0_MBOX0_0, HOST_PAGE_NUM_FN0}, {
-	HOSTFN1_LPU_MBOX0_8, LPU_HOSTFN1_MBOX0_8, HOST_PAGE_NUM_FN1}, {
-	HOSTFN2_LPU_MBOX0_0, LPU_HOSTFN2_MBOX0_0, HOST_PAGE_NUM_FN2}, {
-	HOSTFN3_LPU_MBOX0_8, LPU_HOSTFN3_MBOX0_8, HOST_PAGE_NUM_FN3}
-};
-
-/**
- * Host <-> LPU mailbox command/status registers - port 0
- */
-static struct {
-	u32        hfn, lpu;
-} iocreg_mbcmd_p0[] = {
-	{
-	HOSTFN0_LPU0_MBOX0_CMD_STAT, LPU0_HOSTFN0_MBOX0_CMD_STAT}, {
-	HOSTFN1_LPU0_MBOX0_CMD_STAT, LPU0_HOSTFN1_MBOX0_CMD_STAT}, {
-	HOSTFN2_LPU0_MBOX0_CMD_STAT, LPU0_HOSTFN2_MBOX0_CMD_STAT}, {
-	HOSTFN3_LPU0_MBOX0_CMD_STAT, LPU0_HOSTFN3_MBOX0_CMD_STAT}
-};
-
-/**
- * Host <-> LPU mailbox command/status registers - port 1
- */
-static struct {
-	u32        hfn, lpu;
-} iocreg_mbcmd_p1[] = {
-	{
-	HOSTFN0_LPU1_MBOX0_CMD_STAT, LPU1_HOSTFN0_MBOX0_CMD_STAT}, {
-	HOSTFN1_LPU1_MBOX0_CMD_STAT, LPU1_HOSTFN1_MBOX0_CMD_STAT}, {
-	HOSTFN2_LPU1_MBOX0_CMD_STAT, LPU1_HOSTFN2_MBOX0_CMD_STAT}, {
-	HOSTFN3_LPU1_MBOX0_CMD_STAT, LPU1_HOSTFN3_MBOX0_CMD_STAT}
-};
-
-/**
- * Shared IRQ handling in INTX mode
- */
-static struct {
-	u32        isr, msk;
-} iocreg_shirq_next[] = {
-	{
-	HOSTFN1_INT_STATUS, HOSTFN1_INT_MSK}, {
-	HOSTFN2_INT_STATUS, HOSTFN2_INT_MSK}, {
-	HOSTFN3_INT_STATUS, HOSTFN3_INT_MSK}, {
-HOSTFN0_INT_STATUS, HOSTFN0_INT_MSK},};
-
-static void
-bfa_ioc_reg_init(struct bfa_ioc_s *ioc)
-{
-	bfa_os_addr_t   rb;
-	int             pcifn = bfa_ioc_pcifn(ioc);
-
-	rb = bfa_ioc_bar0(ioc);
-
-	ioc->ioc_regs.hfn_mbox = rb + iocreg_fnreg[pcifn].hfn_mbox;
-	ioc->ioc_regs.lpu_mbox = rb + iocreg_fnreg[pcifn].lpu_mbox;
-	ioc->ioc_regs.host_page_num_fn = rb + iocreg_fnreg[pcifn].hfn_pgn;
-
-	if (ioc->port_id == 0) {
-		ioc->ioc_regs.heartbeat = rb + BFA_IOC0_HBEAT_REG;
-		ioc->ioc_regs.ioc_fwstate = rb + BFA_IOC0_STATE_REG;
-		ioc->ioc_regs.hfn_mbox_cmd = rb + iocreg_mbcmd_p0[pcifn].hfn;
-		ioc->ioc_regs.lpu_mbox_cmd = rb + iocreg_mbcmd_p0[pcifn].lpu;
-		ioc->ioc_regs.ll_halt = rb + FW_INIT_HALT_P0;
-	} else {
-		ioc->ioc_regs.heartbeat = (rb + BFA_IOC1_HBEAT_REG);
-		ioc->ioc_regs.ioc_fwstate = (rb + BFA_IOC1_STATE_REG);
-		ioc->ioc_regs.hfn_mbox_cmd = rb + iocreg_mbcmd_p1[pcifn].hfn;
-		ioc->ioc_regs.lpu_mbox_cmd = rb + iocreg_mbcmd_p1[pcifn].lpu;
-		ioc->ioc_regs.ll_halt = rb + FW_INIT_HALT_P1;
-	}
-
-	/**
-	 * Shared IRQ handling in INTX mode
-	 */
-	ioc->ioc_regs.shirq_isr_next = rb + iocreg_shirq_next[pcifn].isr;
-	ioc->ioc_regs.shirq_msk_next = rb + iocreg_shirq_next[pcifn].msk;
-
-	/*
-	 * PSS control registers
-	 */
-	ioc->ioc_regs.pss_ctl_reg = (rb + PSS_CTL_REG);
-	ioc->ioc_regs.app_pll_fast_ctl_reg = (rb + APP_PLL_425_CTL_REG);
-	ioc->ioc_regs.app_pll_slow_ctl_reg = (rb + APP_PLL_312_CTL_REG);
-
-	/*
-	 * IOC semaphore registers and serialization
-	 */
-	ioc->ioc_regs.ioc_sem_reg = (rb + HOST_SEM0_REG);
-	ioc->ioc_regs.ioc_usage_sem_reg = (rb + HOST_SEM1_REG);
-	ioc->ioc_regs.ioc_usage_reg = (rb + BFA_FW_USE_COUNT);
-
-	/**
-	 * sram memory access
-	 */
-	ioc->ioc_regs.smem_page_start = (rb + PSS_SMEM_PAGE_START);
-	ioc->ioc_regs.smem_pg0 = BFI_IOC_SMEM_PG0_CB;
-	if (ioc->pcidev.device_id == BFA_PCI_DEVICE_ID_CT)
-		ioc->ioc_regs.smem_pg0 = BFI_IOC_SMEM_PG0_CT;
-}
-
-/**
  *      Initiate a full firmware download.
  */
 static void
@@ -1321,9 +1129,6 @@ bfa_ioc_download_fw(struct bfa_ioc_s *ioc, u32 boot_type,
 	if (bfa_ioc_fwimg_get_size(ioc) < BFA_IOC_FWIMG_MINSZ)
 		boot_type = BFI_BOOT_TYPE_FLASH;
 	fwimg = bfa_ioc_fwimg_get_chunk(ioc, chunkno);
-	fwimg[BFI_BOOT_TYPE_OFF / sizeof(u32)] = bfa_os_swap32(boot_type);
-	fwimg[BFI_BOOT_PARAM_OFF / sizeof(u32)] =
-		bfa_os_swap32(boot_param);
 
 	pgnum = bfa_ioc_smem_pgnum(ioc, loff);
 	pgoff = bfa_ioc_smem_pgoff(ioc, loff);
@@ -1332,17 +1137,17 @@ bfa_ioc_download_fw(struct bfa_ioc_s *ioc, u32 boot_type,
 
 	for (i = 0; i < bfa_ioc_fwimg_get_size(ioc); i++) {
 
-		if (BFA_FLASH_CHUNK_NO(i) != chunkno) {
-			chunkno = BFA_FLASH_CHUNK_NO(i);
+		if (BFA_IOC_FLASH_CHUNK_NO(i) != chunkno) {
+			chunkno = BFA_IOC_FLASH_CHUNK_NO(i);
 			fwimg = bfa_ioc_fwimg_get_chunk(ioc,
-					BFA_FLASH_CHUNK_ADDR(chunkno));
+					BFA_IOC_FLASH_CHUNK_ADDR(chunkno));
 		}
 
 		/**
 		 * write smem
 		 */
 		bfa_mem_write(ioc->ioc_regs.smem_page_start, loff,
-			      fwimg[BFA_FLASH_OFFSET_IN_CHUNK(i)]);
+			      fwimg[BFA_IOC_FLASH_OFFSET_IN_CHUNK(i)]);
 
 		loff += sizeof(u32);
 
@@ -1358,6 +1163,14 @@ bfa_ioc_download_fw(struct bfa_ioc_s *ioc, u32 boot_type,
 
 	bfa_reg_write(ioc->ioc_regs.host_page_num_fn,
 		      bfa_ioc_smem_pgnum(ioc, 0));
+
+	/*
+	 * Set boot type and boot param at the end.
+	 */
+	bfa_mem_write(ioc->ioc_regs.smem_page_start, BFI_BOOT_TYPE_OFF,
+			bfa_os_swap32(boot_type));
+	bfa_mem_write(ioc->ioc_regs.smem_page_start, BFI_BOOT_PARAM_OFF,
+			bfa_os_swap32(boot_param));
 }
 
 static void
@@ -1440,168 +1253,10 @@ bfa_ioc_mbox_hbfail(struct bfa_ioc_s *ioc)
 }
 
 /**
- * Initialize IOC to port mapping.
- */
-
-#define FNC_PERS_FN_SHIFT(__fn)	((__fn) * 8)
-static void
-bfa_ioc_map_port(struct bfa_ioc_s *ioc)
-{
-	bfa_os_addr_t   rb = ioc->pcidev.pci_bar_kva;
-	u32        r32;
-
-	/**
-	 * For crossbow, port id is same as pci function.
-	 */
-	if (ioc->pcidev.device_id != BFA_PCI_DEVICE_ID_CT) {
-		ioc->port_id = bfa_ioc_pcifn(ioc);
-		return;
-	}
-
-	/**
-	 * For catapult, base port id on personality register and IOC type
-	 */
-	r32 = bfa_reg_read(rb + FNC_PERS_REG);
-	r32 >>= FNC_PERS_FN_SHIFT(bfa_ioc_pcifn(ioc));
-	ioc->port_id = (r32 & __F0_PORT_MAP_MK) >> __F0_PORT_MAP_SH;
-
-	bfa_trc(ioc, bfa_ioc_pcifn(ioc));
-	bfa_trc(ioc, ioc->port_id);
-}
-
-
-
-/**
  *  bfa_ioc_public
  */
 
 /**
-* Set interrupt mode for a function: INTX or MSIX
- */
-void
-bfa_ioc_isr_mode_set(struct bfa_ioc_s *ioc, bfa_boolean_t msix)
-{
-	bfa_os_addr_t   rb = ioc->pcidev.pci_bar_kva;
-	u32        r32, mode;
-
-	r32 = bfa_reg_read(rb + FNC_PERS_REG);
-	bfa_trc(ioc, r32);
-
-	mode = (r32 >> FNC_PERS_FN_SHIFT(bfa_ioc_pcifn(ioc))) &
-		__F0_INTX_STATUS;
-
-	/**
-	 * If already in desired mode, do not change anything
-	 */
-	if (!msix && mode)
-		return;
-
-	if (msix)
-		mode = __F0_INTX_STATUS_MSIX;
-	else
-		mode = __F0_INTX_STATUS_INTA;
-
-	r32 &= ~(__F0_INTX_STATUS << FNC_PERS_FN_SHIFT(bfa_ioc_pcifn(ioc)));
-	r32 |= (mode << FNC_PERS_FN_SHIFT(bfa_ioc_pcifn(ioc)));
-	bfa_trc(ioc, r32);
-
-	bfa_reg_write(rb + FNC_PERS_REG, r32);
-}
-
-bfa_status_t
-bfa_ioc_pll_init(struct bfa_ioc_s *ioc)
-{
-	bfa_os_addr_t   rb = ioc->pcidev.pci_bar_kva;
-	u32        pll_sclk, pll_fclk, r32;
-
-	if (ioc->pcidev.device_id == BFA_PCI_DEVICE_ID_CT) {
-		pll_sclk =
-			__APP_PLL_312_ENABLE | __APP_PLL_312_LRESETN |
-			__APP_PLL_312_RSEL200500 | __APP_PLL_312_P0_1(0U) |
-			__APP_PLL_312_JITLMT0_1(3U) |
-			__APP_PLL_312_CNTLMT0_1(1U);
-		pll_fclk =
-			__APP_PLL_425_ENABLE | __APP_PLL_425_LRESETN |
-			__APP_PLL_425_RSEL200500 | __APP_PLL_425_P0_1(0U) |
-			__APP_PLL_425_JITLMT0_1(3U) |
-			__APP_PLL_425_CNTLMT0_1(1U);
-
-		/**
-		 * 	For catapult, choose operational mode FC/FCoE
-		 */
-		if (ioc->fcmode) {
-			bfa_reg_write((rb + OP_MODE), 0);
-			bfa_reg_write((rb + ETH_MAC_SER_REG),
-				      __APP_EMS_CMLCKSEL | __APP_EMS_REFCKBUFEN2
-				      | __APP_EMS_CHANNEL_SEL);
-		} else {
-			ioc->pllinit = BFA_TRUE;
-			bfa_reg_write((rb + OP_MODE), __GLOBAL_FCOE_MODE);
-			bfa_reg_write((rb + ETH_MAC_SER_REG),
-				      __APP_EMS_REFCKBUFEN1);
-		}
-	} else {
-		pll_sclk =
-			__APP_PLL_312_ENABLE | __APP_PLL_312_LRESETN |
-			__APP_PLL_312_P0_1(3U) | __APP_PLL_312_JITLMT0_1(3U) |
-			__APP_PLL_312_CNTLMT0_1(3U);
-		pll_fclk =
-			__APP_PLL_425_ENABLE | __APP_PLL_425_LRESETN |
-			__APP_PLL_425_RSEL200500 | __APP_PLL_425_P0_1(3U) |
-			__APP_PLL_425_JITLMT0_1(3U) |
-			__APP_PLL_425_CNTLMT0_1(3U);
-	}
-
-	bfa_reg_write((rb + BFA_IOC0_STATE_REG), BFI_IOC_UNINIT);
-	bfa_reg_write((rb + BFA_IOC1_STATE_REG), BFI_IOC_UNINIT);
-
-	bfa_reg_write((rb + HOSTFN0_INT_MSK), 0xffffffffU);
-	bfa_reg_write((rb + HOSTFN1_INT_MSK), 0xffffffffU);
-	bfa_reg_write((rb + HOSTFN0_INT_STATUS), 0xffffffffU);
-	bfa_reg_write((rb + HOSTFN1_INT_STATUS), 0xffffffffU);
-	bfa_reg_write((rb + HOSTFN0_INT_MSK), 0xffffffffU);
-	bfa_reg_write((rb + HOSTFN1_INT_MSK), 0xffffffffU);
-
-	bfa_reg_write(ioc->ioc_regs.app_pll_slow_ctl_reg,
-		      __APP_PLL_312_LOGIC_SOFT_RESET);
-	bfa_reg_write(ioc->ioc_regs.app_pll_slow_ctl_reg,
-		      __APP_PLL_312_BYPASS | __APP_PLL_312_LOGIC_SOFT_RESET);
-	bfa_reg_write(ioc->ioc_regs.app_pll_fast_ctl_reg,
-		      __APP_PLL_425_LOGIC_SOFT_RESET);
-	bfa_reg_write(ioc->ioc_regs.app_pll_fast_ctl_reg,
-		      __APP_PLL_425_BYPASS | __APP_PLL_425_LOGIC_SOFT_RESET);
-	bfa_os_udelay(2);
-	bfa_reg_write(ioc->ioc_regs.app_pll_slow_ctl_reg,
-		      __APP_PLL_312_LOGIC_SOFT_RESET);
-	bfa_reg_write(ioc->ioc_regs.app_pll_fast_ctl_reg,
-		      __APP_PLL_425_LOGIC_SOFT_RESET);
-
-	bfa_reg_write(ioc->ioc_regs.app_pll_slow_ctl_reg,
-		      pll_sclk | __APP_PLL_312_LOGIC_SOFT_RESET);
-	bfa_reg_write(ioc->ioc_regs.app_pll_fast_ctl_reg,
-		      pll_fclk | __APP_PLL_425_LOGIC_SOFT_RESET);
-
-	/**
-	 * Wait for PLLs to lock.
-	 */
-	bfa_os_udelay(2000);
-	bfa_reg_write((rb + HOSTFN0_INT_STATUS), 0xffffffffU);
-	bfa_reg_write((rb + HOSTFN1_INT_STATUS), 0xffffffffU);
-
-	bfa_reg_write(ioc->ioc_regs.app_pll_slow_ctl_reg, pll_sclk);
-	bfa_reg_write(ioc->ioc_regs.app_pll_fast_ctl_reg, pll_fclk);
-
-	if (ioc->pcidev.device_id == BFA_PCI_DEVICE_ID_CT) {
-		bfa_reg_write((rb + MBIST_CTL_REG), __EDRAM_BISTR_START);
-		bfa_os_udelay(1000);
-		r32 = bfa_reg_read((rb + MBIST_STAT_REG));
-		bfa_trc(ioc, r32);
-	}
-
-	return BFA_STATUS_OK;
-}
-
-/**
  * Interface used by diag module to do firmware boot with memory test
  * as the entry vector.
  */
@@ -1642,7 +1297,7 @@ bfa_ioc_boot(struct bfa_ioc_s *ioc, u32 boot_type, u32 boot_param)
 void
 bfa_ioc_auto_recover(bfa_boolean_t auto_recover)
 {
-	bfa_auto_recover = BFA_FALSE;
+	bfa_auto_recover = auto_recover;
 }
 
 
@@ -1764,6 +1419,14 @@ bfa_ioc_pci_init(struct bfa_ioc_s *ioc, struct bfa_pcidev_s *pcidev,
 	ioc->ctdev = (ioc->pcidev.device_id == BFA_PCI_DEVICE_ID_CT);
 	ioc->cna = ioc->ctdev && !ioc->fcmode;
 
+	/**
+	 * Set asic specific interfaces. See bfa_ioc_cb.c and bfa_ioc_ct.c
+	 */
+	if (ioc->ctdev)
+		bfa_ioc_set_ct_hwif(ioc);
+	else
+		bfa_ioc_set_cb_hwif(ioc);
+
 	bfa_ioc_map_port(ioc);
 	bfa_ioc_reg_init(ioc);
 }
@@ -1830,7 +1493,6 @@ return (auto_recover) ? BFA_DBG_FWTRC_LEN : 0;
 void
 bfa_ioc_debug_memclaim(struct bfa_ioc_s *ioc, void *dbg_fwsave)
 {
-	bfa_assert(ioc->auto_recover);
 	ioc->dbg_fwsave = dbg_fwsave;
 	ioc->dbg_fwsave_len = bfa_ioc_debug_trcsz(ioc->auto_recover);
 }
@@ -1973,7 +1635,7 @@ bfa_ioc_fw_mismatch(struct bfa_ioc_s *ioc)
 	 ((__sm) == BFI_IOC_INITING) ||		\
 	 ((__sm) == BFI_IOC_HWINIT) ||		\
 	 ((__sm) == BFI_IOC_DISABLED) ||	\
-	 ((__sm) == BFI_IOC_HBFAIL) ||		\
+	 ((__sm) == BFI_IOC_FAIL) ||		\
 	 ((__sm) == BFI_IOC_CFG_DISABLED))
 
 /**
@@ -2017,46 +1679,28 @@ bfa_ioc_get_adapter_attr(struct bfa_ioc_s *ioc,
 			 struct bfa_adapter_attr_s *ad_attr)
 {
 	struct bfi_ioc_attr_s *ioc_attr;
-	char            model[BFA_ADAPTER_MODEL_NAME_LEN];
 
 	ioc_attr = ioc->attr;
-	bfa_os_memcpy((void *)&ad_attr->serial_num,
-		      (void *)ioc_attr->brcd_serialnum,
-		      BFA_ADAPTER_SERIAL_NUM_LEN);
-
-	bfa_os_memcpy(&ad_attr->fw_ver, ioc_attr->fw_version, BFA_VERSION_LEN);
-	bfa_os_memcpy(&ad_attr->optrom_ver, ioc_attr->optrom_version,
-		      BFA_VERSION_LEN);
-	bfa_os_memcpy(&ad_attr->manufacturer, BFA_MFG_NAME,
-		      BFA_ADAPTER_MFG_NAME_LEN);
+
+	bfa_ioc_get_adapter_serial_num(ioc, ad_attr->serial_num);
+	bfa_ioc_get_adapter_fw_ver(ioc, ad_attr->fw_ver);
+	bfa_ioc_get_adapter_optrom_ver(ioc, ad_attr->optrom_ver);
+	bfa_ioc_get_adapter_manufacturer(ioc, ad_attr->manufacturer);
 	bfa_os_memcpy(&ad_attr->vpd, &ioc_attr->vpd,
 		      sizeof(struct bfa_mfg_vpd_s));
 
-	ad_attr->nports = BFI_ADAPTER_GETP(NPORTS, ioc_attr->adapter_prop);
-	ad_attr->max_speed = BFI_ADAPTER_GETP(SPEED, ioc_attr->adapter_prop);
+	ad_attr->nports = bfa_ioc_get_nports(ioc);
+	ad_attr->max_speed = bfa_ioc_speed_sup(ioc);
 
-	/**
-	 * model name
-	 */
-	if (BFI_ADAPTER_GETP(SPEED, ioc_attr->adapter_prop) == 10) {
-		strcpy(model, "BR-10?0");
-		model[5] = '0' + ad_attr->nports;
-	} else {
-		strcpy(model, "Brocade-??5");
-		model[8] =
-			'0' + BFI_ADAPTER_GETP(SPEED, ioc_attr->adapter_prop);
-		model[9] = '0' + ad_attr->nports;
-	}
+	bfa_ioc_get_adapter_model(ioc, ad_attr->model);
+	/* For now, model descr uses same model string */
+	bfa_ioc_get_adapter_model(ioc, ad_attr->model_descr);
 
 	if (BFI_ADAPTER_IS_SPECIAL(ioc_attr->adapter_prop))
 		ad_attr->prototype = 1;
 	else
 		ad_attr->prototype = 0;
 
-	bfa_os_memcpy(&ad_attr->model, model, BFA_ADAPTER_MODEL_NAME_LEN);
-	bfa_os_memcpy(&ad_attr->model_descr, &ad_attr->model,
-		      BFA_ADAPTER_MODEL_NAME_LEN);
-
 	ad_attr->pwwn = bfa_ioc_get_pwwn(ioc);
 	ad_attr->mac = bfa_ioc_get_mac(ioc);
 
@@ -2064,41 +1708,122 @@ bfa_ioc_get_adapter_attr(struct bfa_ioc_s *ioc,
 	ad_attr->pcie_lanes = ioc_attr->pcie_lanes;
 	ad_attr->pcie_lanes_orig = ioc_attr->pcie_lanes_orig;
 	ad_attr->asic_rev = ioc_attr->asic_rev;
-	ad_attr->hw_ver[0] = 'R';
-	ad_attr->hw_ver[1] = 'e';
-	ad_attr->hw_ver[2] = 'v';
-	ad_attr->hw_ver[3] = '-';
-	ad_attr->hw_ver[4] = ioc_attr->asic_rev;
-	ad_attr->hw_ver[5] = '\0';
+
+	bfa_ioc_get_pci_chip_rev(ioc, ad_attr->hw_ver);
 
 	ad_attr->cna_capable = ioc->cna;
 }
 
+enum bfa_ioc_type_e
+bfa_ioc_get_type(struct bfa_ioc_s *ioc)
+{
+	if (!ioc->ctdev || ioc->fcmode)
+		return BFA_IOC_TYPE_FC;
+	else if (ioc->ioc_mc == BFI_MC_IOCFC)
+		return BFA_IOC_TYPE_FCoE;
+	else if (ioc->ioc_mc == BFI_MC_LL)
+		return BFA_IOC_TYPE_LL;
+	else {
+		bfa_assert(ioc->ioc_mc == BFI_MC_LL);
+		return BFA_IOC_TYPE_LL;
+	}
+}
+
+void
+bfa_ioc_get_adapter_serial_num(struct bfa_ioc_s *ioc, char *serial_num)
+{
+	bfa_os_memset((void *)serial_num, 0, BFA_ADAPTER_SERIAL_NUM_LEN);
+	bfa_os_memcpy((void *)serial_num,
+			(void *)ioc->attr->brcd_serialnum,
+			BFA_ADAPTER_SERIAL_NUM_LEN);
+}
+
+void
+bfa_ioc_get_adapter_fw_ver(struct bfa_ioc_s *ioc, char *fw_ver)
+{
+	bfa_os_memset((void *)fw_ver, 0, BFA_VERSION_LEN);
+	bfa_os_memcpy(fw_ver, ioc->attr->fw_version, BFA_VERSION_LEN);
+}
+
+void
+bfa_ioc_get_pci_chip_rev(struct bfa_ioc_s *ioc, char *chip_rev)
+{
+	bfa_assert(chip_rev);
+
+	bfa_os_memset((void *)chip_rev, 0, BFA_IOC_CHIP_REV_LEN);
+
+	chip_rev[0] = 'R';
+	chip_rev[1] = 'e';
+	chip_rev[2] = 'v';
+	chip_rev[3] = '-';
+	chip_rev[4] = ioc->attr->asic_rev;
+	chip_rev[5] = '\0';
+}
+
+void
+bfa_ioc_get_adapter_optrom_ver(struct bfa_ioc_s *ioc, char *optrom_ver)
+{
+	bfa_os_memset((void *)optrom_ver, 0, BFA_VERSION_LEN);
+	bfa_os_memcpy(optrom_ver, ioc->attr->optrom_version,
+		BFA_VERSION_LEN);
+}
+
+void
+bfa_ioc_get_adapter_manufacturer(struct bfa_ioc_s *ioc, char *manufacturer)
+{
+	bfa_os_memset((void *)manufacturer, 0, BFA_ADAPTER_MFG_NAME_LEN);
+	bfa_os_memcpy(manufacturer, BFA_MFG_NAME, BFA_ADAPTER_MFG_NAME_LEN);
+}
+
+void
+bfa_ioc_get_adapter_model(struct bfa_ioc_s *ioc, char *model)
+{
+	struct bfi_ioc_attr_s   *ioc_attr;
+	u8              nports;
+	u8              max_speed;
+
+	bfa_assert(model);
+	bfa_os_memset((void *)model, 0, BFA_ADAPTER_MODEL_NAME_LEN);
+
+	ioc_attr = ioc->attr;
+
+	nports = bfa_ioc_get_nports(ioc);
+	max_speed = bfa_ioc_speed_sup(ioc);
+
+	/**
+	 * model name
+	 */
+	if (max_speed == 10) {
+		strcpy(model, "BR-10?0");
+		model[5] = '0' + nports;
+	} else {
+		strcpy(model, "Brocade-??5");
+		model[8] = '0' + max_speed;
+		model[9] = '0' + nports;
+	}
+}
+
+enum bfa_ioc_state
+bfa_ioc_get_state(struct bfa_ioc_s *ioc)
+{
+	return bfa_sm_to_state(ioc_sm_table, ioc->fsm);
+}
+
 void
 bfa_ioc_get_attr(struct bfa_ioc_s *ioc, struct bfa_ioc_attr_s *ioc_attr)
 {
 	bfa_os_memset((void *)ioc_attr, 0, sizeof(struct bfa_ioc_attr_s));
 
-	ioc_attr->state = bfa_sm_to_state(ioc_sm_table, ioc->fsm);
+	ioc_attr->state = bfa_ioc_get_state(ioc);
 	ioc_attr->port_id = ioc->port_id;
 
-	if (!ioc->ctdev)
-		ioc_attr->ioc_type = BFA_IOC_TYPE_FC;
-	else if (ioc->ioc_mc == BFI_MC_IOCFC)
-		ioc_attr->ioc_type = BFA_IOC_TYPE_FCoE;
-	else if (ioc->ioc_mc == BFI_MC_LL)
-		ioc_attr->ioc_type = BFA_IOC_TYPE_LL;
+	ioc_attr->ioc_type = bfa_ioc_get_type(ioc);
 
 	bfa_ioc_get_adapter_attr(ioc, &ioc_attr->adapter_attr);
 
 	ioc_attr->pci_attr.device_id = ioc->pcidev.device_id;
 	ioc_attr->pci_attr.pcifn = ioc->pcidev.pci_func;
-	ioc_attr->pci_attr.chip_rev[0] = 'R';
-	ioc_attr->pci_attr.chip_rev[1] = 'e';
-	ioc_attr->pci_attr.chip_rev[2] = 'v';
-	ioc_attr->pci_attr.chip_rev[3] = '-';
-	ioc_attr->pci_attr.chip_rev[4] = ioc_attr->adapter_attr.asic_rev;
-	ioc_attr->pci_attr.chip_rev[5] = '\0';
+	bfa_ioc_get_pci_chip_rev(ioc, ioc_attr->pci_attr.chip_rev);
 }
 
 /**
@@ -2195,29 +1920,6 @@ bfa_ioc_get_fcmode(struct bfa_ioc_s *ioc)
 }
 
 /**
- * Return true if interrupt should be claimed.
- */
-bfa_boolean_t
-bfa_ioc_intx_claim(struct bfa_ioc_s *ioc)
-{
-	u32        isr, msk;
-
-	/**
-	 * Always claim if not catapult.
-	 */
-	if (!ioc->ctdev)
-		return BFA_TRUE;
-
-	/**
-	 * FALSE if next device is claiming interrupt.
-	 * TRUE if next device is not interrupting or not present.
-	 */
-	msk = bfa_reg_read(ioc->ioc_regs.shirq_msk_next);
-	isr = bfa_reg_read(ioc->ioc_regs.shirq_isr_next);
-	return !(isr & ~msk);
-}
-
-/**
  * Send AEN notification
  */
 static void
@@ -2226,32 +1928,14 @@ bfa_ioc_aen_post(struct bfa_ioc_s *ioc, enum bfa_ioc_aen_event event)
 	union bfa_aen_data_u aen_data;
 	struct bfa_log_mod_s *logmod = ioc->logm;
 	s32         inst_num = 0;
-	struct bfa_ioc_attr_s ioc_attr;
+	enum bfa_ioc_type_e ioc_type;
 
-	switch (event) {
-	case BFA_IOC_AEN_HBGOOD:
-		bfa_log(logmod, BFA_AEN_IOC_HBGOOD, inst_num);
-		break;
-	case BFA_IOC_AEN_HBFAIL:
-		bfa_log(logmod, BFA_AEN_IOC_HBFAIL, inst_num);
-		break;
-	case BFA_IOC_AEN_ENABLE:
-		bfa_log(logmod, BFA_AEN_IOC_ENABLE, inst_num);
-		break;
-	case BFA_IOC_AEN_DISABLE:
-		bfa_log(logmod, BFA_AEN_IOC_DISABLE, inst_num);
-		break;
-	case BFA_IOC_AEN_FWMISMATCH:
-		bfa_log(logmod, BFA_AEN_IOC_FWMISMATCH, inst_num);
-		break;
-	default:
-		break;
-	}
+	bfa_log(logmod, BFA_LOG_CREATE_ID(BFA_AEN_CAT_IOC, event), inst_num);
 
 	memset(&aen_data.ioc.pwwn, 0, sizeof(aen_data.ioc.pwwn));
 	memset(&aen_data.ioc.mac, 0, sizeof(aen_data.ioc.mac));
-	bfa_ioc_get_attr(ioc, &ioc_attr);
-	switch (ioc_attr.ioc_type) {
+	ioc_type = bfa_ioc_get_type(ioc);
+	switch (ioc_type) {
 	case BFA_IOC_TYPE_FC:
 		aen_data.ioc.pwwn = bfa_ioc_get_pwwn(ioc);
 		break;
@@ -2263,10 +1947,10 @@ bfa_ioc_aen_post(struct bfa_ioc_s *ioc, enum bfa_ioc_aen_event event)
 		aen_data.ioc.mac = bfa_ioc_get_mac(ioc);
 		break;
 	default:
-		bfa_assert(ioc_attr.ioc_type == BFA_IOC_TYPE_FC);
+		bfa_assert(ioc_type == BFA_IOC_TYPE_FC);
 		break;
 	}
-	aen_data.ioc.ioc_type = ioc_attr.ioc_type;
+	aen_data.ioc.ioc_type = ioc_type;
 }
 
 /**
@@ -2290,6 +1974,15 @@ bfa_ioc_debug_fwsave(struct bfa_ioc_s *ioc, void *trcdata, int *trclen)
 }
 
 /**
+ * Clear saved firmware trace
+ */
+void
+bfa_ioc_debug_fwsave_clear(struct bfa_ioc_s *ioc)
+{
+	ioc->dbg_fwsave_once = BFA_TRUE;
+}
+
+/**
  * Retrieve saved firmware trace from a prior IOC failure.
  */
 bfa_status_t
@@ -2304,6 +1997,13 @@ bfa_ioc_debug_fwtrc(struct bfa_ioc_s *ioc, void *trcdata, int *trclen)
 
 	pgnum = bfa_ioc_smem_pgnum(ioc, loff);
 	loff = bfa_ioc_smem_pgoff(ioc, loff);
+
+	/*
+	 *  Hold semaphore to serialize pll init and fwtrc.
+	 */
+	if (BFA_FALSE == bfa_ioc_sem_get(ioc->ioc_regs.ioc_init_sem_reg))
+		return BFA_STATUS_FAILED;
+
 	bfa_reg_write(ioc->ioc_regs.host_page_num_fn, pgnum);
 
 	tlen = *trclen;
@@ -2329,6 +2029,12 @@ bfa_ioc_debug_fwtrc(struct bfa_ioc_s *ioc, void *trcdata, int *trclen)
 	}
 	bfa_reg_write(ioc->ioc_regs.host_page_num_fn,
 		      bfa_ioc_smem_pgnum(ioc, 0));
+
+	/*
+	 *  release semaphore.
+	 */
+	bfa_ioc_sem_release(ioc->ioc_regs.ioc_init_sem_reg);
+
 	bfa_trc(ioc, pgnum);
 
 	*trclen = tlen * sizeof(u32);
diff --git a/drivers/scsi/bfa/bfa_ioc.h b/drivers/scsi/bfa/bfa_ioc.h
index 7c30f05ab137..d0804406ea1a 100644
--- a/drivers/scsi/bfa/bfa_ioc.h
+++ b/drivers/scsi/bfa/bfa_ioc.h
@@ -74,15 +74,18 @@ struct bfa_ioc_regs_s {
 	bfa_os_addr_t   lpu_mbox_cmd;
 	bfa_os_addr_t   lpu_mbox;
 	bfa_os_addr_t   pss_ctl_reg;
+	bfa_os_addr_t   pss_err_status_reg;
 	bfa_os_addr_t   app_pll_fast_ctl_reg;
 	bfa_os_addr_t   app_pll_slow_ctl_reg;
 	bfa_os_addr_t   ioc_sem_reg;
 	bfa_os_addr_t   ioc_usage_sem_reg;
+	bfa_os_addr_t   ioc_init_sem_reg;
 	bfa_os_addr_t   ioc_usage_reg;
 	bfa_os_addr_t   host_page_num_fn;
 	bfa_os_addr_t   heartbeat;
 	bfa_os_addr_t   ioc_fwstate;
 	bfa_os_addr_t   ll_halt;
+	bfa_os_addr_t   err_set;
 	bfa_os_addr_t   shirq_isr_next;
 	bfa_os_addr_t   shirq_msk_next;
 	bfa_os_addr_t   smem_page_start;
@@ -154,7 +157,6 @@ struct bfa_ioc_s {
 	struct bfa_timer_s 	ioc_timer;
 	struct bfa_timer_s 	sem_timer;
 	u32		hb_count;
-	u32		hb_fail;
 	u32		retry_count;
 	struct list_head		hb_notify_q;
 	void			*dbg_fwsave;
@@ -177,6 +179,22 @@ struct bfa_ioc_s {
 	struct bfi_ioc_attr_s	*attr;
 	struct bfa_ioc_cbfn_s	*cbfn;
 	struct bfa_ioc_mbox_mod_s mbox_mod;
+	struct bfa_ioc_hwif_s   *ioc_hwif;
+};
+
+struct bfa_ioc_hwif_s {
+	bfa_status_t    (*ioc_pll_init) (struct bfa_ioc_s *ioc);
+	bfa_boolean_t   (*ioc_firmware_lock)    (struct bfa_ioc_s *ioc);
+	void            (*ioc_firmware_unlock)  (struct bfa_ioc_s *ioc);
+	u32 *   	(*ioc_fwimg_get_chunk)  (struct bfa_ioc_s *ioc,
+						u32 off);
+	u32		(*ioc_fwimg_get_size)   (struct bfa_ioc_s *ioc);
+	void		(*ioc_reg_init) (struct bfa_ioc_s *ioc);
+	void		(*ioc_map_port) (struct bfa_ioc_s *ioc);
+	void		(*ioc_isr_mode_set)     (struct bfa_ioc_s *ioc,
+						bfa_boolean_t msix);
+	void            (*ioc_notify_hbfail)    (struct bfa_ioc_s *ioc);
+	void            (*ioc_ownership_reset)  (struct bfa_ioc_s *ioc);
 };
 
 #define bfa_ioc_pcifn(__ioc)		((__ioc)->pcidev.pci_func)
@@ -191,6 +209,15 @@ struct bfa_ioc_s {
 #define bfa_ioc_rx_bbcredit(__ioc)	((__ioc)->attr->rx_bbcredit)
 #define bfa_ioc_speed_sup(__ioc)	\
 	BFI_ADAPTER_GETP(SPEED, (__ioc)->attr->adapter_prop)
+#define bfa_ioc_get_nports(__ioc)       \
+	BFI_ADAPTER_GETP(NPORTS, (__ioc)->attr->adapter_prop)
+
+#define bfa_ioc_stats(_ioc, _stats)     ((_ioc)->stats._stats++)
+#define BFA_IOC_FWIMG_MINSZ     (16 * 1024)
+
+#define BFA_IOC_FLASH_CHUNK_NO(off)             (off / BFI_FLASH_CHUNK_SZ_WORDS)
+#define BFA_IOC_FLASH_OFFSET_IN_CHUNK(off)      (off % BFI_FLASH_CHUNK_SZ_WORDS)
+#define BFA_IOC_FLASH_CHUNK_ADDR(chunkno)  (chunkno * BFI_FLASH_CHUNK_SZ_WORDS)
 
 /**
  * IOC mailbox interface
@@ -207,6 +234,14 @@ void bfa_ioc_mbox_regisr(struct bfa_ioc_s *ioc, enum bfi_mclass mc,
 /**
  * IOC interfaces
  */
+#define bfa_ioc_pll_init(__ioc) ((__ioc)->ioc_hwif->ioc_pll_init(__ioc))
+#define bfa_ioc_isr_mode_set(__ioc, __msix)                     \
+			((__ioc)->ioc_hwif->ioc_isr_mode_set(__ioc, __msix))
+#define bfa_ioc_ownership_reset(__ioc)                          \
+			((__ioc)->ioc_hwif->ioc_ownership_reset(__ioc))
+
+void bfa_ioc_set_ct_hwif(struct bfa_ioc_s *ioc);
+void bfa_ioc_set_cb_hwif(struct bfa_ioc_s *ioc);
 void bfa_ioc_attach(struct bfa_ioc_s *ioc, void *bfa,
 		struct bfa_ioc_cbfn_s *cbfn, struct bfa_timer_mod_s *timer_mod,
 		struct bfa_trc_mod_s *trcmod,
@@ -223,13 +258,21 @@ bfa_boolean_t bfa_ioc_intx_claim(struct bfa_ioc_s *ioc);
 void bfa_ioc_boot(struct bfa_ioc_s *ioc, u32 boot_type, u32 boot_param);
 void bfa_ioc_isr(struct bfa_ioc_s *ioc, struct bfi_mbmsg_s *msg);
 void bfa_ioc_error_isr(struct bfa_ioc_s *ioc);
-void bfa_ioc_isr_mode_set(struct bfa_ioc_s *ioc, bfa_boolean_t intx);
-bfa_status_t bfa_ioc_pll_init(struct bfa_ioc_s *ioc);
 bfa_boolean_t bfa_ioc_is_operational(struct bfa_ioc_s *ioc);
 bfa_boolean_t bfa_ioc_is_disabled(struct bfa_ioc_s *ioc);
 bfa_boolean_t bfa_ioc_fw_mismatch(struct bfa_ioc_s *ioc);
 bfa_boolean_t bfa_ioc_adapter_is_disabled(struct bfa_ioc_s *ioc);
 void bfa_ioc_cfg_complete(struct bfa_ioc_s *ioc);
+enum bfa_ioc_type_e bfa_ioc_get_type(struct bfa_ioc_s *ioc);
+void bfa_ioc_get_adapter_serial_num(struct bfa_ioc_s *ioc, char *serial_num);
+void bfa_ioc_get_adapter_fw_ver(struct bfa_ioc_s *ioc, char *fw_ver);
+void bfa_ioc_get_adapter_optrom_ver(struct bfa_ioc_s *ioc, char *optrom_ver);
+void bfa_ioc_get_adapter_model(struct bfa_ioc_s *ioc, char *model);
+void bfa_ioc_get_adapter_manufacturer(struct bfa_ioc_s *ioc,
+	char *manufacturer);
+void bfa_ioc_get_pci_chip_rev(struct bfa_ioc_s *ioc, char *chip_rev);
+enum bfa_ioc_state bfa_ioc_get_state(struct bfa_ioc_s *ioc);
+
 void bfa_ioc_get_attr(struct bfa_ioc_s *ioc, struct bfa_ioc_attr_s *ioc_attr);
 void bfa_ioc_get_adapter_attr(struct bfa_ioc_s *ioc,
 		struct bfa_adapter_attr_s *ad_attr);
@@ -237,6 +280,7 @@ int bfa_ioc_debug_trcsz(bfa_boolean_t auto_recover);
 void bfa_ioc_debug_memclaim(struct bfa_ioc_s *ioc, void *dbg_fwsave);
 bfa_status_t bfa_ioc_debug_fwsave(struct bfa_ioc_s *ioc, void *trcdata,
 		int *trclen);
+void bfa_ioc_debug_fwsave_clear(struct bfa_ioc_s *ioc);
 bfa_status_t bfa_ioc_debug_fwtrc(struct bfa_ioc_s *ioc, void *trcdata,
 				 int *trclen);
 u32 bfa_ioc_smem_pgnum(struct bfa_ioc_s *ioc, u32 fmaddr);
@@ -245,6 +289,13 @@ void bfa_ioc_set_fcmode(struct bfa_ioc_s *ioc);
 bfa_boolean_t bfa_ioc_get_fcmode(struct bfa_ioc_s *ioc);
 void bfa_ioc_hbfail_register(struct bfa_ioc_s *ioc,
 	struct bfa_ioc_hbfail_notify_s *notify);
+bfa_boolean_t bfa_ioc_sem_get(bfa_os_addr_t sem_reg);
+void bfa_ioc_sem_release(bfa_os_addr_t sem_reg);
+void bfa_ioc_hw_sem_release(struct bfa_ioc_s *ioc);
+void bfa_ioc_fwver_get(struct bfa_ioc_s *ioc,
+			struct bfi_ioc_image_hdr_s *fwhdr);
+bfa_boolean_t bfa_ioc_fwver_cmp(struct bfa_ioc_s *ioc,
+			struct bfi_ioc_image_hdr_s *fwhdr);
 
 /*
  * bfa mfg wwn API functions
diff --git a/drivers/scsi/bfa/bfa_ioc_cb.c b/drivers/scsi/bfa/bfa_ioc_cb.c
new file mode 100644
index 000000000000..3ce85319f739
--- /dev/null
+++ b/drivers/scsi/bfa/bfa_ioc_cb.c
@@ -0,0 +1,274 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <bfa.h>
+#include <bfa_ioc.h>
+#include <bfa_fwimg_priv.h>
+#include <cna/bfa_cna_trcmod.h>
+#include <cs/bfa_debug.h>
+#include <bfi/bfi_ioc.h>
+#include <bfi/bfi_cbreg.h>
+#include <log/bfa_log_hal.h>
+#include <defs/bfa_defs_pci.h>
+
+BFA_TRC_FILE(CNA, IOC_CB);
+
+/*
+ * forward declarations
+ */
+static bfa_status_t bfa_ioc_cb_pll_init(struct bfa_ioc_s *ioc);
+static bfa_boolean_t bfa_ioc_cb_firmware_lock(struct bfa_ioc_s *ioc);
+static void bfa_ioc_cb_firmware_unlock(struct bfa_ioc_s *ioc);
+static u32  *bfa_ioc_cb_fwimg_get_chunk(struct bfa_ioc_s *ioc, u32 off);
+static u32 bfa_ioc_cb_fwimg_get_size(struct bfa_ioc_s *ioc);
+static void bfa_ioc_cb_reg_init(struct bfa_ioc_s *ioc);
+static void bfa_ioc_cb_map_port(struct bfa_ioc_s *ioc);
+static void bfa_ioc_cb_isr_mode_set(struct bfa_ioc_s *ioc, bfa_boolean_t msix);
+static void bfa_ioc_cb_notify_hbfail(struct bfa_ioc_s *ioc);
+static void bfa_ioc_cb_ownership_reset(struct bfa_ioc_s *ioc);
+
+struct bfa_ioc_hwif_s hwif_cb = {
+	bfa_ioc_cb_pll_init,
+	bfa_ioc_cb_firmware_lock,
+	bfa_ioc_cb_firmware_unlock,
+	bfa_ioc_cb_fwimg_get_chunk,
+	bfa_ioc_cb_fwimg_get_size,
+	bfa_ioc_cb_reg_init,
+	bfa_ioc_cb_map_port,
+	bfa_ioc_cb_isr_mode_set,
+	bfa_ioc_cb_notify_hbfail,
+	bfa_ioc_cb_ownership_reset,
+};
+
+/**
+ * Called from bfa_ioc_attach() to map asic specific calls.
+ */
+void
+bfa_ioc_set_cb_hwif(struct bfa_ioc_s *ioc)
+{
+	ioc->ioc_hwif = &hwif_cb;
+}
+
+static u32 *
+bfa_ioc_cb_fwimg_get_chunk(struct bfa_ioc_s *ioc, u32 off)
+{
+	return bfi_image_cb_get_chunk(off);
+}
+
+static u32
+bfa_ioc_cb_fwimg_get_size(struct bfa_ioc_s *ioc)
+{
+	return bfi_image_cb_size;
+}
+
+/**
+ * Return true if firmware of current driver matches the running firmware.
+ */
+static bfa_boolean_t
+bfa_ioc_cb_firmware_lock(struct bfa_ioc_s *ioc)
+{
+	return BFA_TRUE;
+}
+
+static void
+bfa_ioc_cb_firmware_unlock(struct bfa_ioc_s *ioc)
+{
+}
+
+/**
+ * Notify other functions on HB failure.
+ */
+static void
+bfa_ioc_cb_notify_hbfail(struct bfa_ioc_s *ioc)
+{
+	bfa_reg_write(ioc->ioc_regs.err_set, __PSS_ERR_STATUS_SET);
+	bfa_reg_read(ioc->ioc_regs.err_set);
+}
+
+/**
+ * Host to LPU mailbox message addresses
+ */
+static struct { u32 hfn_mbox, lpu_mbox, hfn_pgn; } iocreg_fnreg[] = {
+	{ HOSTFN0_LPU_MBOX0_0, LPU_HOSTFN0_MBOX0_0, HOST_PAGE_NUM_FN0 },
+	{ HOSTFN1_LPU_MBOX0_8, LPU_HOSTFN1_MBOX0_8, HOST_PAGE_NUM_FN1 }
+};
+
+/**
+ * Host <-> LPU mailbox command/status registers
+ */
+static struct { u32 hfn, lpu; } iocreg_mbcmd[] = {
+	{ HOSTFN0_LPU0_CMD_STAT, LPU0_HOSTFN0_CMD_STAT },
+	{ HOSTFN1_LPU1_CMD_STAT, LPU1_HOSTFN1_CMD_STAT }
+};
+
+static void
+bfa_ioc_cb_reg_init(struct bfa_ioc_s *ioc)
+{
+	bfa_os_addr_t	rb;
+	int		pcifn = bfa_ioc_pcifn(ioc);
+
+	rb = bfa_ioc_bar0(ioc);
+
+	ioc->ioc_regs.hfn_mbox = rb + iocreg_fnreg[pcifn].hfn_mbox;
+	ioc->ioc_regs.lpu_mbox = rb + iocreg_fnreg[pcifn].lpu_mbox;
+	ioc->ioc_regs.host_page_num_fn = rb + iocreg_fnreg[pcifn].hfn_pgn;
+
+	if (ioc->port_id == 0) {
+		ioc->ioc_regs.heartbeat = rb + BFA_IOC0_HBEAT_REG;
+		ioc->ioc_regs.ioc_fwstate = rb + BFA_IOC0_STATE_REG;
+	} else {
+		ioc->ioc_regs.heartbeat = (rb + BFA_IOC1_HBEAT_REG);
+		ioc->ioc_regs.ioc_fwstate = (rb + BFA_IOC1_STATE_REG);
+	}
+
+	/**
+	 * Host <-> LPU mailbox command/status registers
+	 */
+	ioc->ioc_regs.hfn_mbox_cmd = rb + iocreg_mbcmd[pcifn].hfn;
+	ioc->ioc_regs.lpu_mbox_cmd = rb + iocreg_mbcmd[pcifn].lpu;
+
+	/*
+	 * PSS control registers
+	 */
+	ioc->ioc_regs.pss_ctl_reg = (rb + PSS_CTL_REG);
+	ioc->ioc_regs.pss_err_status_reg = (rb + PSS_ERR_STATUS_REG);
+	ioc->ioc_regs.app_pll_fast_ctl_reg = (rb + APP_PLL_400_CTL_REG);
+	ioc->ioc_regs.app_pll_slow_ctl_reg = (rb + APP_PLL_212_CTL_REG);
+
+	/*
+	 * IOC semaphore registers and serialization
+	 */
+	ioc->ioc_regs.ioc_sem_reg = (rb + HOST_SEM0_REG);
+	ioc->ioc_regs.ioc_init_sem_reg = (rb + HOST_SEM2_REG);
+
+	/**
+	 * sram memory access
+	 */
+	ioc->ioc_regs.smem_page_start = (rb + PSS_SMEM_PAGE_START);
+	ioc->ioc_regs.smem_pg0 = BFI_IOC_SMEM_PG0_CB;
+
+	/*
+	 * err set reg : for notification of hb failure
+	 */
+	ioc->ioc_regs.err_set = (rb + ERR_SET_REG);
+}
+
+/**
+ * Initialize IOC to port mapping.
+ */
+static void
+bfa_ioc_cb_map_port(struct bfa_ioc_s *ioc)
+{
+	/**
+	 * For crossbow, port id is same as pci function.
+	 */
+	ioc->port_id = bfa_ioc_pcifn(ioc);
+	bfa_trc(ioc, ioc->port_id);
+}
+
+/**
+ * Set interrupt mode for a function: INTX or MSIX
+ */
+static void
+bfa_ioc_cb_isr_mode_set(struct bfa_ioc_s *ioc, bfa_boolean_t msix)
+{
+}
+
+static bfa_status_t
+bfa_ioc_cb_pll_init(struct bfa_ioc_s *ioc)
+{
+	bfa_os_addr_t	rb = ioc->pcidev.pci_bar_kva;
+	u32	pll_sclk, pll_fclk;
+
+	/*
+	 *  Hold semaphore so that nobody can access the chip during init.
+	 */
+	bfa_ioc_sem_get(ioc->ioc_regs.ioc_init_sem_reg);
+
+	pll_sclk = __APP_PLL_212_ENABLE | __APP_PLL_212_LRESETN |
+			__APP_PLL_212_P0_1(3U) |
+			__APP_PLL_212_JITLMT0_1(3U) |
+			__APP_PLL_212_CNTLMT0_1(3U);
+	pll_fclk = __APP_PLL_400_ENABLE | __APP_PLL_400_LRESETN |
+			__APP_PLL_400_RSEL200500 | __APP_PLL_400_P0_1(3U) |
+			__APP_PLL_400_JITLMT0_1(3U) |
+			__APP_PLL_400_CNTLMT0_1(3U);
+
+	bfa_reg_write((rb + BFA_IOC0_STATE_REG), BFI_IOC_UNINIT);
+	bfa_reg_write((rb + BFA_IOC1_STATE_REG), BFI_IOC_UNINIT);
+
+	bfa_reg_write((rb + HOSTFN0_INT_MSK), 0xffffffffU);
+	bfa_reg_write((rb + HOSTFN1_INT_MSK), 0xffffffffU);
+	bfa_reg_write((rb + HOSTFN0_INT_STATUS), 0xffffffffU);
+	bfa_reg_write((rb + HOSTFN1_INT_STATUS), 0xffffffffU);
+	bfa_reg_write((rb + HOSTFN0_INT_MSK), 0xffffffffU);
+	bfa_reg_write((rb + HOSTFN1_INT_MSK), 0xffffffffU);
+
+	bfa_reg_write(ioc->ioc_regs.app_pll_slow_ctl_reg,
+			__APP_PLL_212_LOGIC_SOFT_RESET);
+	bfa_reg_write(ioc->ioc_regs.app_pll_slow_ctl_reg,
+			__APP_PLL_212_BYPASS |
+			__APP_PLL_212_LOGIC_SOFT_RESET);
+	bfa_reg_write(ioc->ioc_regs.app_pll_fast_ctl_reg,
+			__APP_PLL_400_LOGIC_SOFT_RESET);
+	bfa_reg_write(ioc->ioc_regs.app_pll_fast_ctl_reg,
+			__APP_PLL_400_BYPASS |
+			__APP_PLL_400_LOGIC_SOFT_RESET);
+	bfa_os_udelay(2);
+	bfa_reg_write(ioc->ioc_regs.app_pll_slow_ctl_reg,
+			__APP_PLL_212_LOGIC_SOFT_RESET);
+	bfa_reg_write(ioc->ioc_regs.app_pll_fast_ctl_reg,
+			__APP_PLL_400_LOGIC_SOFT_RESET);
+
+	bfa_reg_write(ioc->ioc_regs.app_pll_slow_ctl_reg,
+			pll_sclk | __APP_PLL_212_LOGIC_SOFT_RESET);
+	bfa_reg_write(ioc->ioc_regs.app_pll_fast_ctl_reg,
+			pll_fclk | __APP_PLL_400_LOGIC_SOFT_RESET);
+
+	/**
+	 * Wait for PLLs to lock.
+	 */
+	bfa_os_udelay(2000);
+	bfa_reg_write((rb + HOSTFN0_INT_STATUS), 0xffffffffU);
+	bfa_reg_write((rb + HOSTFN1_INT_STATUS), 0xffffffffU);
+
+	bfa_reg_write(ioc->ioc_regs.app_pll_slow_ctl_reg, pll_sclk);
+	bfa_reg_write(ioc->ioc_regs.app_pll_fast_ctl_reg, pll_fclk);
+
+	/*
+	 *  release semaphore.
+	 */
+	bfa_ioc_sem_release(ioc->ioc_regs.ioc_init_sem_reg);
+
+	return BFA_STATUS_OK;
+}
+
+/**
+ * Cleanup hw semaphore and usecnt registers
+ */
+static void
+bfa_ioc_cb_ownership_reset(struct bfa_ioc_s *ioc)
+{
+
+	/*
+	 * Read the hw sem reg to make sure that it is locked
+	 * before we clear it. If it is not locked, writing 1
+	 * will lock it instead of clearing it.
+	 */
+	bfa_reg_read(ioc->ioc_regs.ioc_sem_reg);
+	bfa_ioc_hw_sem_release(ioc);
+}
diff --git a/drivers/scsi/bfa/bfa_ioc_ct.c b/drivers/scsi/bfa/bfa_ioc_ct.c
new file mode 100644
index 000000000000..20b58ad5f95c
--- /dev/null
+++ b/drivers/scsi/bfa/bfa_ioc_ct.c
@@ -0,0 +1,423 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <bfa.h>
+#include <bfa_ioc.h>
+#include <bfa_fwimg_priv.h>
+#include <cna/bfa_cna_trcmod.h>
+#include <cs/bfa_debug.h>
+#include <bfi/bfi_ioc.h>
+#include <bfi/bfi_ctreg.h>
+#include <log/bfa_log_hal.h>
+#include <defs/bfa_defs_pci.h>
+
+BFA_TRC_FILE(CNA, IOC_CT);
+
+/*
+ * forward declarations
+ */
+static bfa_status_t bfa_ioc_ct_pll_init(struct bfa_ioc_s *ioc);
+static bfa_boolean_t bfa_ioc_ct_firmware_lock(struct bfa_ioc_s *ioc);
+static void bfa_ioc_ct_firmware_unlock(struct bfa_ioc_s *ioc);
+static u32* bfa_ioc_ct_fwimg_get_chunk(struct bfa_ioc_s *ioc,
+					u32 off);
+static u32 bfa_ioc_ct_fwimg_get_size(struct bfa_ioc_s *ioc);
+static void bfa_ioc_ct_reg_init(struct bfa_ioc_s *ioc);
+static void bfa_ioc_ct_map_port(struct bfa_ioc_s *ioc);
+static void bfa_ioc_ct_isr_mode_set(struct bfa_ioc_s *ioc, bfa_boolean_t msix);
+static void bfa_ioc_ct_notify_hbfail(struct bfa_ioc_s *ioc);
+static void bfa_ioc_ct_ownership_reset(struct bfa_ioc_s *ioc);
+
+struct bfa_ioc_hwif_s hwif_ct = {
+	bfa_ioc_ct_pll_init,
+	bfa_ioc_ct_firmware_lock,
+	bfa_ioc_ct_firmware_unlock,
+	bfa_ioc_ct_fwimg_get_chunk,
+	bfa_ioc_ct_fwimg_get_size,
+	bfa_ioc_ct_reg_init,
+	bfa_ioc_ct_map_port,
+	bfa_ioc_ct_isr_mode_set,
+	bfa_ioc_ct_notify_hbfail,
+	bfa_ioc_ct_ownership_reset,
+};
+
+/**
+ * Called from bfa_ioc_attach() to map asic specific calls.
+ */
+void
+bfa_ioc_set_ct_hwif(struct bfa_ioc_s *ioc)
+{
+	ioc->ioc_hwif = &hwif_ct;
+}
+
+static u32*
+bfa_ioc_ct_fwimg_get_chunk(struct bfa_ioc_s *ioc, u32 off)
+{
+	return bfi_image_ct_get_chunk(off);
+}
+
+static u32
+bfa_ioc_ct_fwimg_get_size(struct bfa_ioc_s *ioc)
+{
+	return bfi_image_ct_size;
+}
+
+/**
+ * Return true if firmware of current driver matches the running firmware.
+ */
+static bfa_boolean_t
+bfa_ioc_ct_firmware_lock(struct bfa_ioc_s *ioc)
+{
+	enum bfi_ioc_state ioc_fwstate;
+	u32 usecnt;
+	struct bfi_ioc_image_hdr_s fwhdr;
+
+	/**
+	 * Firmware match check is relevant only for CNA.
+	 */
+	if (!ioc->cna)
+		return BFA_TRUE;
+
+	/**
+	 * If bios boot (flash based) -- do not increment usage count
+	 */
+	if (bfa_ioc_ct_fwimg_get_size(ioc) < BFA_IOC_FWIMG_MINSZ)
+		return BFA_TRUE;
+
+	bfa_ioc_sem_get(ioc->ioc_regs.ioc_usage_sem_reg);
+	usecnt = bfa_reg_read(ioc->ioc_regs.ioc_usage_reg);
+
+	/**
+	 * If usage count is 0, always return TRUE.
+	 */
+	if (usecnt == 0) {
+		bfa_reg_write(ioc->ioc_regs.ioc_usage_reg, 1);
+		bfa_ioc_sem_release(ioc->ioc_regs.ioc_usage_sem_reg);
+		bfa_trc(ioc, usecnt);
+		return BFA_TRUE;
+	}
+
+	ioc_fwstate = bfa_reg_read(ioc->ioc_regs.ioc_fwstate);
+	bfa_trc(ioc, ioc_fwstate);
+
+	/**
+	 * Use count cannot be non-zero and chip in uninitialized state.
+	 */
+	bfa_assert(ioc_fwstate != BFI_IOC_UNINIT);
+
+	/**
+	 * Check if another driver with a different firmware is active
+	 */
+	bfa_ioc_fwver_get(ioc, &fwhdr);
+	if (!bfa_ioc_fwver_cmp(ioc, &fwhdr)) {
+		bfa_ioc_sem_release(ioc->ioc_regs.ioc_usage_sem_reg);
+		bfa_trc(ioc, usecnt);
+		return BFA_FALSE;
+	}
+
+	/**
+	 * Same firmware version. Increment the reference count.
+	 */
+	usecnt++;
+	bfa_reg_write(ioc->ioc_regs.ioc_usage_reg, usecnt);
+	bfa_ioc_sem_release(ioc->ioc_regs.ioc_usage_sem_reg);
+	bfa_trc(ioc, usecnt);
+	return BFA_TRUE;
+}
+
+static void
+bfa_ioc_ct_firmware_unlock(struct bfa_ioc_s *ioc)
+{
+	u32 usecnt;
+
+	/**
+	 * Firmware lock is relevant only for CNA.
+	 * If bios boot (flash based) -- do not decrement usage count
+	 */
+	if (!ioc->cna || bfa_ioc_ct_fwimg_get_size(ioc) < BFA_IOC_FWIMG_MINSZ)
+		return;
+
+	/**
+	 * decrement usage count
+	 */
+	bfa_ioc_sem_get(ioc->ioc_regs.ioc_usage_sem_reg);
+	usecnt = bfa_reg_read(ioc->ioc_regs.ioc_usage_reg);
+	bfa_assert(usecnt > 0);
+
+	usecnt--;
+	bfa_reg_write(ioc->ioc_regs.ioc_usage_reg, usecnt);
+	bfa_trc(ioc, usecnt);
+
+	bfa_ioc_sem_release(ioc->ioc_regs.ioc_usage_sem_reg);
+}
+
+/**
+ * Notify other functions on HB failure.
+ */
+static void
+bfa_ioc_ct_notify_hbfail(struct bfa_ioc_s *ioc)
+{
+	if (ioc->cna) {
+		bfa_reg_write(ioc->ioc_regs.ll_halt, __FW_INIT_HALT_P);
+		/* Wait for halt to take effect */
+		bfa_reg_read(ioc->ioc_regs.ll_halt);
+	} else {
+		bfa_reg_write(ioc->ioc_regs.err_set, __PSS_ERR_STATUS_SET);
+		bfa_reg_read(ioc->ioc_regs.err_set);
+	}
+}
+
+/**
+ * Host to LPU mailbox message addresses
+ */
+static struct { u32 hfn_mbox, lpu_mbox, hfn_pgn; } iocreg_fnreg[] = {
+	{ HOSTFN0_LPU_MBOX0_0, LPU_HOSTFN0_MBOX0_0, HOST_PAGE_NUM_FN0 },
+	{ HOSTFN1_LPU_MBOX0_8, LPU_HOSTFN1_MBOX0_8, HOST_PAGE_NUM_FN1 },
+	{ HOSTFN2_LPU_MBOX0_0, LPU_HOSTFN2_MBOX0_0, HOST_PAGE_NUM_FN2 },
+	{ HOSTFN3_LPU_MBOX0_8, LPU_HOSTFN3_MBOX0_8, HOST_PAGE_NUM_FN3 }
+};
+
+/**
+ * Host <-> LPU mailbox command/status registers - port 0
+ */
+static struct { u32 hfn, lpu; } iocreg_mbcmd_p0[] = {
+	{ HOSTFN0_LPU0_MBOX0_CMD_STAT, LPU0_HOSTFN0_MBOX0_CMD_STAT },
+	{ HOSTFN1_LPU0_MBOX0_CMD_STAT, LPU0_HOSTFN1_MBOX0_CMD_STAT },
+	{ HOSTFN2_LPU0_MBOX0_CMD_STAT, LPU0_HOSTFN2_MBOX0_CMD_STAT },
+	{ HOSTFN3_LPU0_MBOX0_CMD_STAT, LPU0_HOSTFN3_MBOX0_CMD_STAT }
+};
+
+/**
+ * Host <-> LPU mailbox command/status registers - port 1
+ */
+static struct { u32 hfn, lpu; } iocreg_mbcmd_p1[] = {
+	{ HOSTFN0_LPU1_MBOX0_CMD_STAT, LPU1_HOSTFN0_MBOX0_CMD_STAT },
+	{ HOSTFN1_LPU1_MBOX0_CMD_STAT, LPU1_HOSTFN1_MBOX0_CMD_STAT },
+	{ HOSTFN2_LPU1_MBOX0_CMD_STAT, LPU1_HOSTFN2_MBOX0_CMD_STAT },
+	{ HOSTFN3_LPU1_MBOX0_CMD_STAT, LPU1_HOSTFN3_MBOX0_CMD_STAT }
+};
+
+static void
+bfa_ioc_ct_reg_init(struct bfa_ioc_s *ioc)
+{
+	bfa_os_addr_t	rb;
+	int		pcifn = bfa_ioc_pcifn(ioc);
+
+	rb = bfa_ioc_bar0(ioc);
+
+	ioc->ioc_regs.hfn_mbox = rb + iocreg_fnreg[pcifn].hfn_mbox;
+	ioc->ioc_regs.lpu_mbox = rb + iocreg_fnreg[pcifn].lpu_mbox;
+	ioc->ioc_regs.host_page_num_fn = rb + iocreg_fnreg[pcifn].hfn_pgn;
+
+	if (ioc->port_id == 0) {
+		ioc->ioc_regs.heartbeat = rb + BFA_IOC0_HBEAT_REG;
+		ioc->ioc_regs.ioc_fwstate = rb + BFA_IOC0_STATE_REG;
+		ioc->ioc_regs.hfn_mbox_cmd = rb + iocreg_mbcmd_p0[pcifn].hfn;
+		ioc->ioc_regs.lpu_mbox_cmd = rb + iocreg_mbcmd_p0[pcifn].lpu;
+		ioc->ioc_regs.ll_halt = rb + FW_INIT_HALT_P0;
+	} else {
+		ioc->ioc_regs.heartbeat = (rb + BFA_IOC1_HBEAT_REG);
+		ioc->ioc_regs.ioc_fwstate = (rb + BFA_IOC1_STATE_REG);
+		ioc->ioc_regs.hfn_mbox_cmd = rb + iocreg_mbcmd_p1[pcifn].hfn;
+		ioc->ioc_regs.lpu_mbox_cmd = rb + iocreg_mbcmd_p1[pcifn].lpu;
+		ioc->ioc_regs.ll_halt = rb + FW_INIT_HALT_P1;
+	}
+
+	/*
+	 * PSS control registers
+	 */
+	ioc->ioc_regs.pss_ctl_reg = (rb + PSS_CTL_REG);
+	ioc->ioc_regs.pss_err_status_reg = (rb + PSS_ERR_STATUS_REG);
+	ioc->ioc_regs.app_pll_fast_ctl_reg = (rb + APP_PLL_425_CTL_REG);
+	ioc->ioc_regs.app_pll_slow_ctl_reg = (rb + APP_PLL_312_CTL_REG);
+
+	/*
+	 * IOC semaphore registers and serialization
+	 */
+	ioc->ioc_regs.ioc_sem_reg = (rb + HOST_SEM0_REG);
+	ioc->ioc_regs.ioc_usage_sem_reg = (rb + HOST_SEM1_REG);
+	ioc->ioc_regs.ioc_init_sem_reg = (rb + HOST_SEM2_REG);
+	ioc->ioc_regs.ioc_usage_reg = (rb + BFA_FW_USE_COUNT);
+
+	/**
+	 * sram memory access
+	 */
+	ioc->ioc_regs.smem_page_start = (rb + PSS_SMEM_PAGE_START);
+	ioc->ioc_regs.smem_pg0 = BFI_IOC_SMEM_PG0_CT;
+
+	/*
+	 * err set reg : for notification of hb failure in fcmode
+	 */
+	ioc->ioc_regs.err_set = (rb + ERR_SET_REG);
+}
+
+/**
+ * Initialize IOC to port mapping.
+ */
+
+#define FNC_PERS_FN_SHIFT(__fn)	((__fn) * 8)
+static void
+bfa_ioc_ct_map_port(struct bfa_ioc_s *ioc)
+{
+	bfa_os_addr_t	rb = ioc->pcidev.pci_bar_kva;
+	u32	r32;
+
+	/**
+	 * For catapult, base port id on personality register and IOC type
+	 */
+	r32 = bfa_reg_read(rb + FNC_PERS_REG);
+	r32 >>= FNC_PERS_FN_SHIFT(bfa_ioc_pcifn(ioc));
+	ioc->port_id = (r32 & __F0_PORT_MAP_MK) >> __F0_PORT_MAP_SH;
+
+	bfa_trc(ioc, bfa_ioc_pcifn(ioc));
+	bfa_trc(ioc, ioc->port_id);
+}
+
+/**
+ * Set interrupt mode for a function: INTX or MSIX
+ */
+static void
+bfa_ioc_ct_isr_mode_set(struct bfa_ioc_s *ioc, bfa_boolean_t msix)
+{
+	bfa_os_addr_t	rb = ioc->pcidev.pci_bar_kva;
+	u32	r32, mode;
+
+	r32 = bfa_reg_read(rb + FNC_PERS_REG);
+	bfa_trc(ioc, r32);
+
+	mode = (r32 >> FNC_PERS_FN_SHIFT(bfa_ioc_pcifn(ioc))) &
+		__F0_INTX_STATUS;
+
+	/**
+	 * If already in desired mode, do not change anything
+	 */
+	if (!msix && mode)
+		return;
+
+	if (msix)
+		mode = __F0_INTX_STATUS_MSIX;
+	else
+		mode = __F0_INTX_STATUS_INTA;
+
+	r32 &= ~(__F0_INTX_STATUS << FNC_PERS_FN_SHIFT(bfa_ioc_pcifn(ioc)));
+	r32 |= (mode << FNC_PERS_FN_SHIFT(bfa_ioc_pcifn(ioc)));
+	bfa_trc(ioc, r32);
+
+	bfa_reg_write(rb + FNC_PERS_REG, r32);
+}
+
+static bfa_status_t
+bfa_ioc_ct_pll_init(struct bfa_ioc_s *ioc)
+{
+	bfa_os_addr_t	rb = ioc->pcidev.pci_bar_kva;
+	u32	pll_sclk, pll_fclk, r32;
+
+	/*
+	 *  Hold semaphore so that nobody can access the chip during init.
+	 */
+	bfa_ioc_sem_get(ioc->ioc_regs.ioc_init_sem_reg);
+
+	pll_sclk = __APP_PLL_312_LRESETN | __APP_PLL_312_ENARST |
+		__APP_PLL_312_RSEL200500 | __APP_PLL_312_P0_1(3U) |
+		__APP_PLL_312_JITLMT0_1(3U) |
+		__APP_PLL_312_CNTLMT0_1(1U);
+	pll_fclk = __APP_PLL_425_LRESETN | __APP_PLL_425_ENARST |
+		__APP_PLL_425_RSEL200500 | __APP_PLL_425_P0_1(3U) |
+		__APP_PLL_425_JITLMT0_1(3U) |
+		__APP_PLL_425_CNTLMT0_1(1U);
+
+	/**
+	 *	For catapult, choose operational mode FC/FCoE
+	 */
+	if (ioc->fcmode) {
+		bfa_reg_write((rb + OP_MODE), 0);
+		bfa_reg_write((rb + ETH_MAC_SER_REG),
+				__APP_EMS_CMLCKSEL |
+				__APP_EMS_REFCKBUFEN2 |
+				__APP_EMS_CHANNEL_SEL);
+	} else {
+		ioc->pllinit = BFA_TRUE;
+		bfa_reg_write((rb + OP_MODE), __GLOBAL_FCOE_MODE);
+		bfa_reg_write((rb + ETH_MAC_SER_REG),
+				 __APP_EMS_REFCKBUFEN1);
+	}
+
+	bfa_reg_write((rb + BFA_IOC0_STATE_REG), BFI_IOC_UNINIT);
+	bfa_reg_write((rb + BFA_IOC1_STATE_REG), BFI_IOC_UNINIT);
+
+	bfa_reg_write((rb + HOSTFN0_INT_MSK), 0xffffffffU);
+	bfa_reg_write((rb + HOSTFN1_INT_MSK), 0xffffffffU);
+	bfa_reg_write((rb + HOSTFN0_INT_STATUS), 0xffffffffU);
+	bfa_reg_write((rb + HOSTFN1_INT_STATUS), 0xffffffffU);
+	bfa_reg_write((rb + HOSTFN0_INT_MSK), 0xffffffffU);
+	bfa_reg_write((rb + HOSTFN1_INT_MSK), 0xffffffffU);
+
+	bfa_reg_write(ioc->ioc_regs.app_pll_slow_ctl_reg, pll_sclk |
+		__APP_PLL_312_LOGIC_SOFT_RESET);
+	bfa_reg_write(ioc->ioc_regs.app_pll_fast_ctl_reg, pll_fclk |
+		__APP_PLL_425_LOGIC_SOFT_RESET);
+	bfa_reg_write(ioc->ioc_regs.app_pll_slow_ctl_reg, pll_sclk |
+		__APP_PLL_312_LOGIC_SOFT_RESET | __APP_PLL_312_ENABLE);
+	bfa_reg_write(ioc->ioc_regs.app_pll_fast_ctl_reg, pll_fclk |
+		__APP_PLL_425_LOGIC_SOFT_RESET | __APP_PLL_425_ENABLE);
+
+	/**
+	 * Wait for PLLs to lock.
+	 */
+	bfa_reg_read(rb + HOSTFN0_INT_MSK);
+	bfa_os_udelay(2000);
+	bfa_reg_write((rb + HOSTFN0_INT_STATUS), 0xffffffffU);
+	bfa_reg_write((rb + HOSTFN1_INT_STATUS), 0xffffffffU);
+
+	bfa_reg_write(ioc->ioc_regs.app_pll_slow_ctl_reg, pll_sclk |
+		__APP_PLL_312_ENABLE);
+	bfa_reg_write(ioc->ioc_regs.app_pll_fast_ctl_reg, pll_fclk |
+		__APP_PLL_425_ENABLE);
+
+	bfa_reg_write((rb + MBIST_CTL_REG), __EDRAM_BISTR_START);
+	bfa_os_udelay(1000);
+	r32 = bfa_reg_read((rb + MBIST_STAT_REG));
+	bfa_trc(ioc, r32);
+	/*
+	 *  release semaphore.
+	 */
+	bfa_ioc_sem_release(ioc->ioc_regs.ioc_init_sem_reg);
+
+	return BFA_STATUS_OK;
+}
+
+/**
+ * Cleanup hw semaphore and usecnt registers
+ */
+static void
+bfa_ioc_ct_ownership_reset(struct bfa_ioc_s *ioc)
+{
+
+	if (ioc->cna) {
+		bfa_ioc_sem_get(ioc->ioc_regs.ioc_usage_sem_reg);
+		bfa_reg_write(ioc->ioc_regs.ioc_usage_reg, 0);
+		bfa_ioc_sem_release(ioc->ioc_regs.ioc_usage_sem_reg);
+	}
+
+	/*
+	 * Read the hw sem reg to make sure that it is locked
+	 * before we clear it. If it is not locked, writing 1
+	 * will lock it instead of clearing it.
+	 */
+	bfa_reg_read(ioc->ioc_regs.ioc_sem_reg);
+	bfa_ioc_hw_sem_release(ioc);
+}
diff --git a/drivers/scsi/bfa/bfa_iocfc.c b/drivers/scsi/bfa/bfa_iocfc.c
index d7ab792a9e54..a76de2669bfc 100644
--- a/drivers/scsi/bfa/bfa_iocfc.c
+++ b/drivers/scsi/bfa/bfa_iocfc.c
@@ -172,6 +172,7 @@ bfa_iocfc_init_mem(struct bfa_s *bfa, void *bfad, struct bfa_iocfc_cfg_s *cfg,
 	 */
 	if (bfa_ioc_devid(&bfa->ioc) == BFA_PCI_DEVICE_ID_CT) {
 		iocfc->hwif.hw_reginit = bfa_hwct_reginit;
+		iocfc->hwif.hw_reqq_ack = bfa_hwct_reqq_ack;
 		iocfc->hwif.hw_rspq_ack = bfa_hwct_rspq_ack;
 		iocfc->hwif.hw_msix_init = bfa_hwct_msix_init;
 		iocfc->hwif.hw_msix_install = bfa_hwct_msix_install;
@@ -180,6 +181,7 @@ bfa_iocfc_init_mem(struct bfa_s *bfa, void *bfad, struct bfa_iocfc_cfg_s *cfg,
 		iocfc->hwif.hw_msix_getvecs = bfa_hwct_msix_getvecs;
 	} else {
 		iocfc->hwif.hw_reginit = bfa_hwcb_reginit;
+		iocfc->hwif.hw_reqq_ack = bfa_hwcb_reqq_ack;
 		iocfc->hwif.hw_rspq_ack = bfa_hwcb_rspq_ack;
 		iocfc->hwif.hw_msix_init = bfa_hwcb_msix_init;
 		iocfc->hwif.hw_msix_install = bfa_hwcb_msix_install;
@@ -336,8 +338,10 @@ bfa_iocfc_init_cb(void *bfa_arg, bfa_boolean_t complete)
 			bfa_cb_init(bfa->bfad, BFA_STATUS_OK);
 		else
 			bfa_cb_init(bfa->bfad, BFA_STATUS_FAILED);
-	} else
-		bfa->iocfc.action = BFA_IOCFC_ACT_NONE;
+	} else {
+		if (bfa->iocfc.cfgdone)
+			bfa->iocfc.action = BFA_IOCFC_ACT_NONE;
+	}
 }
 
 static void
@@ -619,8 +623,6 @@ bfa_iocfc_attach(struct bfa_s *bfa, void *bfad, struct bfa_iocfc_cfg_s *cfg,
 
 	bfa_ioc_attach(&bfa->ioc, bfa, &bfa_iocfc_cbfn, &bfa->timer_mod,
 		bfa->trcmod, bfa->aen, bfa->logm);
-	bfa_ioc_pci_init(&bfa->ioc, pcidev, BFI_MC_IOCFC);
-	bfa_ioc_mbox_register(&bfa->ioc, bfa_mbox_isrs);
 
 	/**
 	 * Choose FC (ssid: 0x1C) v/s FCoE (ssid: 0x14) mode.
@@ -628,6 +630,9 @@ bfa_iocfc_attach(struct bfa_s *bfa, void *bfad, struct bfa_iocfc_cfg_s *cfg,
 	if (0)
 		bfa_ioc_set_fcmode(&bfa->ioc);
 
+	bfa_ioc_pci_init(&bfa->ioc, pcidev, BFI_MC_IOCFC);
+	bfa_ioc_mbox_register(&bfa->ioc, bfa_mbox_isrs);
+
 	bfa_iocfc_init_mem(bfa, bfad, cfg, pcidev);
 	bfa_iocfc_mem_claim(bfa, cfg, meminfo);
 	bfa_timer_init(&bfa->timer_mod);
@@ -654,7 +659,6 @@ bfa_iocfc_init(struct bfa_s *bfa)
 {
 	bfa->iocfc.action = BFA_IOCFC_ACT_INIT;
 	bfa_ioc_enable(&bfa->ioc);
-	bfa_msix_install(bfa);
 }
 
 /**
@@ -797,6 +801,11 @@ bfa_iocfc_get_stats(struct bfa_s *bfa, struct bfa_iocfc_stats_s *stats,
 		return BFA_STATUS_DEVBUSY;
 	}
 
+	if (!bfa_iocfc_is_operational(bfa)) {
+		bfa_trc(bfa, 0);
+		return BFA_STATUS_IOC_NON_OP;
+	}
+
 	iocfc->stats_busy = BFA_TRUE;
 	iocfc->stats_ret = stats;
 	iocfc->stats_cbfn = cbfn;
@@ -817,6 +826,11 @@ bfa_iocfc_clear_stats(struct bfa_s *bfa, bfa_cb_ioc_t cbfn, void *cbarg)
 		return BFA_STATUS_DEVBUSY;
 	}
 
+	if (!bfa_iocfc_is_operational(bfa)) {
+		bfa_trc(bfa, 0);
+		return BFA_STATUS_IOC_NON_OP;
+	}
+
 	iocfc->stats_busy = BFA_TRUE;
 	iocfc->stats_cbfn = cbfn;
 	iocfc->stats_cbarg = cbarg;
diff --git a/drivers/scsi/bfa/bfa_iocfc.h b/drivers/scsi/bfa/bfa_iocfc.h
index ce9a830a4207..fbb4bdc9d600 100644
--- a/drivers/scsi/bfa/bfa_iocfc.h
+++ b/drivers/scsi/bfa/bfa_iocfc.h
@@ -54,6 +54,7 @@ struct bfa_msix_s {
  */
 struct bfa_hwif_s {
 	void (*hw_reginit)(struct bfa_s *bfa);
+	void (*hw_reqq_ack)(struct bfa_s *bfa, int reqq);
 	void (*hw_rspq_ack)(struct bfa_s *bfa, int rspq);
 	void (*hw_msix_init)(struct bfa_s *bfa, int nvecs);
 	void (*hw_msix_install)(struct bfa_s *bfa);
@@ -143,6 +144,7 @@ void bfa_msix_rspq(struct bfa_s *bfa, int vec);
 void bfa_msix_lpu_err(struct bfa_s *bfa, int vec);
 
 void bfa_hwcb_reginit(struct bfa_s *bfa);
+void bfa_hwcb_reqq_ack(struct bfa_s *bfa, int rspq);
 void bfa_hwcb_rspq_ack(struct bfa_s *bfa, int rspq);
 void bfa_hwcb_msix_init(struct bfa_s *bfa, int nvecs);
 void bfa_hwcb_msix_install(struct bfa_s *bfa);
@@ -151,6 +153,7 @@ void bfa_hwcb_isr_mode_set(struct bfa_s *bfa, bfa_boolean_t msix);
 void bfa_hwcb_msix_getvecs(struct bfa_s *bfa, u32 *vecmap,
 			u32 *nvecs, u32 *maxvec);
 void bfa_hwct_reginit(struct bfa_s *bfa);
+void bfa_hwct_reqq_ack(struct bfa_s *bfa, int rspq);
 void bfa_hwct_rspq_ack(struct bfa_s *bfa, int rspq);
 void bfa_hwct_msix_init(struct bfa_s *bfa, int nvecs);
 void bfa_hwct_msix_install(struct bfa_s *bfa);
diff --git a/drivers/scsi/bfa/bfa_ioim.c b/drivers/scsi/bfa/bfa_ioim.c
index f81d359b7089..5b107abe46e5 100644
--- a/drivers/scsi/bfa/bfa_ioim.c
+++ b/drivers/scsi/bfa/bfa_ioim.c
@@ -149,7 +149,7 @@ bfa_ioim_sm_uninit(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(ioim->bfa, event);
 	}
 }
 
@@ -194,7 +194,7 @@ bfa_ioim_sm_sgalloc(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(ioim->bfa, event);
 	}
 }
 
@@ -259,7 +259,7 @@ bfa_ioim_sm_active(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(ioim->bfa, event);
 	}
 }
 
@@ -317,7 +317,7 @@ bfa_ioim_sm_abort(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(ioim->bfa, event);
 	}
 }
 
@@ -377,7 +377,7 @@ bfa_ioim_sm_cleanup(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(ioim->bfa, event);
 	}
 }
 
@@ -419,7 +419,7 @@ bfa_ioim_sm_qfull(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(ioim->bfa, event);
 	}
 }
 
@@ -467,7 +467,7 @@ bfa_ioim_sm_abort_qfull(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(ioim->bfa, event);
 	}
 }
 
@@ -516,7 +516,7 @@ bfa_ioim_sm_cleanup_qfull(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(ioim->bfa, event);
 	}
 }
 
@@ -544,7 +544,7 @@ bfa_ioim_sm_hcb(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(ioim->bfa, event);
 	}
 }
 
@@ -577,7 +577,7 @@ bfa_ioim_sm_hcb_free(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(ioim->bfa, event);
 	}
 }
 
@@ -605,7 +605,7 @@ bfa_ioim_sm_resfree(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(ioim->bfa, event);
 	}
 }
 
diff --git a/drivers/scsi/bfa/bfa_itnim.c b/drivers/scsi/bfa/bfa_itnim.c
index eabf7d38bd09..a914ff255135 100644
--- a/drivers/scsi/bfa/bfa_itnim.c
+++ b/drivers/scsi/bfa/bfa_itnim.c
@@ -144,7 +144,7 @@ bfa_itnim_sm_uninit(struct bfa_itnim_s *itnim, enum bfa_itnim_event event)
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(itnim->bfa, event);
 	}
 }
 
@@ -175,7 +175,7 @@ bfa_itnim_sm_created(struct bfa_itnim_s *itnim, enum bfa_itnim_event event)
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(itnim->bfa, event);
 	}
 }
 
@@ -212,7 +212,7 @@ bfa_itnim_sm_fwcreate(struct bfa_itnim_s *itnim, enum bfa_itnim_event event)
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(itnim->bfa, event);
 	}
 }
 
@@ -247,7 +247,7 @@ bfa_itnim_sm_fwcreate_qfull(struct bfa_itnim_s *itnim,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(itnim->bfa, event);
 	}
 }
 
@@ -275,7 +275,7 @@ bfa_itnim_sm_delete_pending(struct bfa_itnim_s *itnim,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(itnim->bfa, event);
 	}
 }
 
@@ -317,7 +317,7 @@ bfa_itnim_sm_online(struct bfa_itnim_s *itnim, enum bfa_itnim_event event)
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(itnim->bfa, event);
 	}
 }
 
@@ -348,7 +348,7 @@ bfa_itnim_sm_sler(struct bfa_itnim_s *itnim, enum bfa_itnim_event event)
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(itnim->bfa, event);
 	}
 }
 
@@ -385,7 +385,7 @@ bfa_itnim_sm_cleanup_offline(struct bfa_itnim_s *itnim,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(itnim->bfa, event);
 	}
 }
 
@@ -413,7 +413,7 @@ bfa_itnim_sm_cleanup_delete(struct bfa_itnim_s *itnim,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(itnim->bfa, event);
 	}
 }
 
@@ -442,7 +442,7 @@ bfa_itnim_sm_fwdelete(struct bfa_itnim_s *itnim, enum bfa_itnim_event event)
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(itnim->bfa, event);
 	}
 }
 
@@ -470,7 +470,7 @@ bfa_itnim_sm_fwdelete_qfull(struct bfa_itnim_s *itnim,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(itnim->bfa, event);
 	}
 }
 
@@ -502,7 +502,7 @@ bfa_itnim_sm_offline(struct bfa_itnim_s *itnim, enum bfa_itnim_event event)
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(itnim->bfa, event);
 	}
 }
 
@@ -538,7 +538,7 @@ bfa_itnim_sm_iocdisable(struct bfa_itnim_s *itnim,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(itnim->bfa, event);
 	}
 }
 
@@ -559,7 +559,7 @@ bfa_itnim_sm_deleting(struct bfa_itnim_s *itnim, enum bfa_itnim_event event)
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(itnim->bfa, event);
 	}
 }
 
@@ -583,7 +583,7 @@ bfa_itnim_sm_deleting_qfull(struct bfa_itnim_s *itnim,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(itnim->bfa, event);
 	}
 }
 
diff --git a/drivers/scsi/bfa/bfa_lps.c b/drivers/scsi/bfa/bfa_lps.c
index 9844b45412b6..ad06f6189092 100644
--- a/drivers/scsi/bfa/bfa_lps.c
+++ b/drivers/scsi/bfa/bfa_lps.c
@@ -18,6 +18,7 @@
 #include <bfa.h>
 #include <bfi/bfi_lps.h>
 #include <cs/bfa_debug.h>
+#include <defs/bfa_defs_pci.h>
 
 BFA_TRC_FILE(HAL, LPS);
 BFA_MODULE(lps);
@@ -25,6 +26,12 @@ BFA_MODULE(lps);
 #define BFA_LPS_MIN_LPORTS	(1)
 #define BFA_LPS_MAX_LPORTS	(256)
 
+/*
+ * Maximum Vports supported per physical port or vf.
+ */
+#define BFA_LPS_MAX_VPORTS_SUPP_CB  255
+#define BFA_LPS_MAX_VPORTS_SUPP_CT  190
+
 /**
  * forward declarations
  */
@@ -49,7 +56,7 @@ static void bfa_lps_send_login(struct bfa_lps_s *lps);
 static void bfa_lps_send_logout(struct bfa_lps_s *lps);
 static void bfa_lps_login_comp(struct bfa_lps_s *lps);
 static void bfa_lps_logout_comp(struct bfa_lps_s *lps);
-
+static void bfa_lps_cvl_event(struct bfa_lps_s *lps);
 
 /**
  *  lps_pvt BFA LPS private functions
@@ -62,6 +69,7 @@ enum bfa_lps_event {
 	BFA_LPS_SM_RESUME	= 4,	/* space present in reqq queue	*/
 	BFA_LPS_SM_DELETE	= 5,	/* lps delete from user		*/
 	BFA_LPS_SM_OFFLINE	= 6,	/* Link is offline		*/
+	BFA_LPS_SM_RX_CVL       = 7,	/* Rx clear virtual link        */
 };
 
 static void bfa_lps_sm_init(struct bfa_lps_s *lps, enum bfa_lps_event event);
@@ -91,6 +99,12 @@ bfa_lps_sm_init(struct bfa_lps_s *lps, enum bfa_lps_event event)
 			bfa_sm_set_state(lps, bfa_lps_sm_login);
 			bfa_lps_send_login(lps);
 		}
+		if (lps->fdisc)
+			bfa_plog_str(lps->bfa->plog, BFA_PL_MID_LPS,
+			BFA_PL_EID_LOGIN, 0, "FDISC Request");
+		else
+			bfa_plog_str(lps->bfa->plog, BFA_PL_MID_LPS,
+			BFA_PL_EID_LOGIN, 0, "FLOGI Request");
 		break;
 
 	case BFA_LPS_SM_LOGOUT:
@@ -101,6 +115,7 @@ bfa_lps_sm_init(struct bfa_lps_s *lps, enum bfa_lps_event event)
 		bfa_lps_free(lps);
 		break;
 
+	case BFA_LPS_SM_RX_CVL:
 	case BFA_LPS_SM_OFFLINE:
 		break;
 
@@ -112,7 +127,7 @@ bfa_lps_sm_init(struct bfa_lps_s *lps, enum bfa_lps_event event)
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(lps->bfa, event);
 	}
 }
 
@@ -127,10 +142,25 @@ bfa_lps_sm_login(struct bfa_lps_s *lps, enum bfa_lps_event event)
 
 	switch (event) {
 	case BFA_LPS_SM_FWRSP:
-		if (lps->status == BFA_STATUS_OK)
+		if (lps->status == BFA_STATUS_OK) {
 			bfa_sm_set_state(lps, bfa_lps_sm_online);
-		else
+			if (lps->fdisc)
+				bfa_plog_str(lps->bfa->plog, BFA_PL_MID_LPS,
+				BFA_PL_EID_LOGIN, 0, "FDISC Accept");
+			else
+				bfa_plog_str(lps->bfa->plog, BFA_PL_MID_LPS,
+				BFA_PL_EID_LOGIN, 0, "FLOGI Accept");
+		} else {
 			bfa_sm_set_state(lps, bfa_lps_sm_init);
+			if (lps->fdisc)
+				bfa_plog_str(lps->bfa->plog, BFA_PL_MID_LPS,
+				BFA_PL_EID_LOGIN, 0,
+				"FDISC Fail (RJT or timeout)");
+			else
+				bfa_plog_str(lps->bfa->plog, BFA_PL_MID_LPS,
+				BFA_PL_EID_LOGIN, 0,
+				"FLOGI Fail (RJT or timeout)");
+		}
 		bfa_lps_login_comp(lps);
 		break;
 
@@ -139,7 +169,7 @@ bfa_lps_sm_login(struct bfa_lps_s *lps, enum bfa_lps_event event)
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(lps->bfa, event);
 	}
 }
 
@@ -162,8 +192,16 @@ bfa_lps_sm_loginwait(struct bfa_lps_s *lps, enum bfa_lps_event event)
 		bfa_reqq_wcancel(&lps->wqe);
 		break;
 
+	case BFA_LPS_SM_RX_CVL:
+		/*
+		 * Login was not even sent out; so when getting out
+		 * of this state, it will appear like a login retry
+		 * after Clear virtual link
+		 */
+		break;
+
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(lps->bfa, event);
 	}
 }
 
@@ -185,6 +223,17 @@ bfa_lps_sm_online(struct bfa_lps_s *lps, enum bfa_lps_event event)
 			bfa_sm_set_state(lps, bfa_lps_sm_logout);
 			bfa_lps_send_logout(lps);
 		}
+		bfa_plog_str(lps->bfa->plog, BFA_PL_MID_LPS,
+			BFA_PL_EID_LOGO, 0, "Logout");
+		break;
+
+	case BFA_LPS_SM_RX_CVL:
+		bfa_sm_set_state(lps, bfa_lps_sm_init);
+
+		/* Let the vport module know about this event */
+		bfa_lps_cvl_event(lps);
+		bfa_plog_str(lps->bfa->plog, BFA_PL_MID_LPS,
+			BFA_PL_EID_FIP_FCF_CVL, 0, "FCF Clear Virt. Link Rx");
 		break;
 
 	case BFA_LPS_SM_OFFLINE:
@@ -193,7 +242,7 @@ bfa_lps_sm_online(struct bfa_lps_s *lps, enum bfa_lps_event event)
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(lps->bfa, event);
 	}
 }
 
@@ -217,7 +266,7 @@ bfa_lps_sm_logout(struct bfa_lps_s *lps, enum bfa_lps_event event)
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(lps->bfa, event);
 	}
 }
 
@@ -242,7 +291,7 @@ bfa_lps_sm_logowait(struct bfa_lps_s *lps, enum bfa_lps_event event)
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(lps->bfa, event);
 	}
 }
 
@@ -396,6 +445,20 @@ bfa_lps_logout_rsp(struct bfa_s *bfa, struct bfi_lps_logout_rsp_s *rsp)
 }
 
 /**
+ * Firmware received a Clear virtual link request (for FCoE)
+ */
+static void
+bfa_lps_rx_cvl_event(struct bfa_s *bfa, struct bfi_lps_cvl_event_s *cvl)
+{
+	struct bfa_lps_mod_s    *mod = BFA_LPS_MOD(bfa);
+	struct bfa_lps_s        *lps;
+
+	lps = BFA_LPS_FROM_TAG(mod, cvl->lp_tag);
+
+	bfa_sm_send_event(lps, BFA_LPS_SM_RX_CVL);
+}
+
+/**
  * Space is available in request queue, resume queueing request to firmware.
  */
 static void
@@ -531,7 +594,48 @@ bfa_lps_logout_comp(struct bfa_lps_s *lps)
 		bfa_cb_lps_flogo_comp(lps->bfa->bfad, lps->uarg);
 }
 
+/**
+ * Clear virtual link completion handler for non-fcs
+ */
+static void
+bfa_lps_cvl_event_cb(void *arg, bfa_boolean_t complete)
+{
+	struct bfa_lps_s *lps   = arg;
+
+	if (!complete)
+		return;
+
+	/* Clear virtual link to base port will result in link down */
+	if (lps->fdisc)
+		bfa_cb_lps_cvl_event(lps->bfa->bfad, lps->uarg);
+}
+
+/**
+ * Received Clear virtual link event --direct call for fcs,
+ * queue for others
+ */
+static void
+bfa_lps_cvl_event(struct bfa_lps_s *lps)
+{
+	if (!lps->bfa->fcs) {
+		bfa_cb_queue(lps->bfa, &lps->hcb_qe, bfa_lps_cvl_event_cb,
+				lps);
+		return;
+	}
+
+	/* Clear virtual link to base port will result in link down */
+	if (lps->fdisc)
+		bfa_cb_lps_cvl_event(lps->bfa->bfad, lps->uarg);
+}
 
+u32
+bfa_lps_get_max_vport(struct bfa_s *bfa)
+{
+	if (bfa_ioc_devid(&bfa->ioc) == BFA_PCI_DEVICE_ID_CT)
+		return BFA_LPS_MAX_VPORTS_SUPP_CT;
+	else
+		return BFA_LPS_MAX_VPORTS_SUPP_CB;
+}
 
 /**
  *  lps_public BFA LPS public functions
@@ -752,6 +856,14 @@ bfa_lps_get_lsrjt_expl(struct bfa_lps_s *lps)
 	return lps->lsrjt_expl;
 }
 
+/**
+ * Return fpma/spma MAC for lport
+ */
+struct mac_s
+bfa_lps_get_lp_mac(struct bfa_lps_s *lps)
+{
+	return lps->lp_mac;
+}
 
 /**
  * LPS firmware message class handler.
@@ -773,6 +885,10 @@ bfa_lps_isr(struct bfa_s *bfa, struct bfi_msg_s *m)
 		bfa_lps_logout_rsp(bfa, msg.logout_rsp);
 		break;
 
+	case BFI_LPS_H2I_CVL_EVENT:
+		bfa_lps_rx_cvl_event(bfa, msg.cvl_event);
+		break;
+
 	default:
 		bfa_trc(bfa, m->mhdr.msg_id);
 		bfa_assert(0);
diff --git a/drivers/scsi/bfa/bfa_module.c b/drivers/scsi/bfa/bfa_module.c
index 32eda8e1ec65..a7fcc80c177e 100644
--- a/drivers/scsi/bfa/bfa_module.c
+++ b/drivers/scsi/bfa/bfa_module.c
@@ -24,7 +24,7 @@
  */
 struct bfa_module_s *hal_mods[] = {
 	&hal_mod_sgpg,
-	&hal_mod_pport,
+	&hal_mod_fcport,
 	&hal_mod_fcxp,
 	&hal_mod_lps,
 	&hal_mod_uf,
@@ -45,7 +45,7 @@ bfa_isr_func_t  bfa_isrs[BFI_MC_MAX] = {
 	bfa_isr_unhandled,	/* BFI_MC_DIAG */
 	bfa_isr_unhandled,	/* BFI_MC_FLASH */
 	bfa_isr_unhandled,	/* BFI_MC_CEE */
-	bfa_pport_isr,		/* BFI_MC_PORT */
+	bfa_fcport_isr,		/* BFI_MC_FCPORT */
 	bfa_isr_unhandled,	/* BFI_MC_IOCFC */
 	bfa_isr_unhandled,	/* BFI_MC_LL */
 	bfa_uf_isr,		/* BFI_MC_UF */
diff --git a/drivers/scsi/bfa/bfa_modules_priv.h b/drivers/scsi/bfa/bfa_modules_priv.h
index 96f70534593c..f554c2fad6a9 100644
--- a/drivers/scsi/bfa/bfa_modules_priv.h
+++ b/drivers/scsi/bfa/bfa_modules_priv.h
@@ -29,7 +29,7 @@
 
 
 struct bfa_modules_s {
-	struct bfa_pport_s	pport;	/*  physical port module	*/
+	struct bfa_fcport_s	fcport;	/*  fc port module	*/
 	struct bfa_fcxp_mod_s fcxp_mod; /*  fcxp module		*/
 	struct bfa_lps_mod_s lps_mod;   /*  fcxp module		*/
 	struct bfa_uf_mod_s uf_mod;	/*  unsolicited frame module	*/
diff --git a/drivers/scsi/bfa/bfa_port_priv.h b/drivers/scsi/bfa/bfa_port_priv.h
index 51f698a06b6d..40e256ec67ff 100644
--- a/drivers/scsi/bfa/bfa_port_priv.h
+++ b/drivers/scsi/bfa/bfa_port_priv.h
@@ -23,9 +23,19 @@
 #include "bfa_intr_priv.h"
 
 /**
- * BFA physical port data structure
+ * Link notification data structure
  */
-struct bfa_pport_s {
+struct bfa_fcport_ln_s {
+	struct bfa_fcport_s     *fcport;
+	bfa_sm_t                sm;
+	struct bfa_cb_qe_s      ln_qe;  /*  BFA callback queue elem for ln */
+	enum bfa_pport_linkstate ln_event; /*  ln event for callback */
+};
+
+/**
+ * BFA FC port data structure
+ */
+struct bfa_fcport_s {
 	struct bfa_s 		*bfa;	/*  parent BFA instance */
 	bfa_sm_t		sm;	/*  port state machine */
 	wwn_t			nwwn;	/*  node wwn of physical port */
@@ -36,6 +46,8 @@ struct bfa_pport_s {
 	enum bfa_pport_topology topology;	/*  current topology */
 	u8			myalpa;	/*  my ALPA in LOOP topology */
 	u8			rsvd[3];
+	u32             mypid:24;
+	u32             rsvd_b:8;
 	struct bfa_pport_cfg_s	cfg;	/*  current port configuration */
 	struct bfa_qos_attr_s  qos_attr;   /* QoS Attributes */
 	struct bfa_qos_vc_attr_s qos_vc_attr;  /*  VC info from ELP */
@@ -49,42 +61,31 @@ struct bfa_pport_s {
 	void			(*event_cbfn) (void *cbarg,
 						bfa_pport_event_t event);
 	union {
-		union bfi_pport_i2h_msg_u i2hmsg;
+		union bfi_fcport_i2h_msg_u i2hmsg;
 	} event_arg;
 	void			*bfad;	/*  BFA driver handle */
+	struct bfa_fcport_ln_s   ln; /* Link Notification */
 	struct bfa_cb_qe_s		hcb_qe;	/*  BFA callback queue elem */
-	enum bfa_pport_linkstate	hcb_event;
-					/*  link event for callback */
+	struct bfa_timer_s      timer;  /*  timer */
 	u32		msgtag;	/*  fimrware msg tag for reply */
 	u8			*stats_kva;
 	u64		stats_pa;
-	union bfa_pport_stats_u *stats;	/*  pport stats */
-	u32		mypid:24;
-	u32		rsvd_b:8;
-	struct bfa_timer_s 	timer;	/*  timer */
-	union bfa_pport_stats_u 	*stats_ret;
-					/*  driver stats location */
-	bfa_status_t		stats_status;
-					/*  stats/statsclr status */
-	bfa_boolean_t   	stats_busy;
-					/*  outstanding stats/statsclr */
-	bfa_boolean_t   	stats_qfull;
-	bfa_boolean_t   	diag_busy;
-					/*  diag busy status */
-	bfa_boolean_t   	beacon;
-					/*  port beacon status */
-	bfa_boolean_t   	link_e2e_beacon;
-					/*  link beacon status */
-	bfa_cb_pport_t		stats_cbfn;
-					/*  driver callback function */
-	void			*stats_cbarg;
-					/* *!< user callback arg */
+	union bfa_fcport_stats_u *stats;
+	union bfa_fcport_stats_u *stats_ret; /*  driver stats location */
+	bfa_status_t            stats_status; /*  stats/statsclr status */
+	bfa_boolean_t           stats_busy; /*  outstanding stats/statsclr */
+	bfa_boolean_t           stats_qfull;
+	bfa_cb_pport_t          stats_cbfn; /*  driver callback function */
+	void                    *stats_cbarg; /* *!< user callback arg */
+	bfa_boolean_t           diag_busy; /*  diag busy status */
+	bfa_boolean_t           beacon; /*  port beacon status */
+	bfa_boolean_t           link_e2e_beacon; /*  link beacon status */
 };
 
-#define BFA_PORT_MOD(__bfa)	(&(__bfa)->modules.pport)
+#define BFA_FCPORT_MOD(__bfa)	(&(__bfa)->modules.fcport)
 
 /*
  * public functions
  */
-void	bfa_pport_isr(struct bfa_s *bfa, struct bfi_msg_s *msg);
+void	bfa_fcport_isr(struct bfa_s *bfa, struct bfi_msg_s *msg);
 #endif /* __BFA_PORT_PRIV_H__ */
diff --git a/drivers/scsi/bfa/bfa_priv.h b/drivers/scsi/bfa/bfa_priv.h
index 0747a6b26f7b..be80fc7e1b0e 100644
--- a/drivers/scsi/bfa/bfa_priv.h
+++ b/drivers/scsi/bfa/bfa_priv.h
@@ -101,7 +101,7 @@ extern bfa_boolean_t bfa_auto_recover;
 extern struct bfa_module_s hal_mod_flash;
 extern struct bfa_module_s hal_mod_fcdiag;
 extern struct bfa_module_s hal_mod_sgpg;
-extern struct bfa_module_s hal_mod_pport;
+extern struct bfa_module_s hal_mod_fcport;
 extern struct bfa_module_s hal_mod_fcxp;
 extern struct bfa_module_s hal_mod_lps;
 extern struct bfa_module_s hal_mod_uf;
diff --git a/drivers/scsi/bfa/bfa_rport.c b/drivers/scsi/bfa/bfa_rport.c
index 3e1990a74258..7c509fa244e4 100644
--- a/drivers/scsi/bfa/bfa_rport.c
+++ b/drivers/scsi/bfa/bfa_rport.c
@@ -114,7 +114,7 @@ bfa_rport_sm_uninit(struct bfa_rport_s *rp, enum bfa_rport_event event)
 
 	default:
 		bfa_stats(rp, sm_un_unexp);
-		bfa_assert(0);
+		bfa_sm_fault(rp->bfa, event);
 	}
 }
 
@@ -146,7 +146,7 @@ bfa_rport_sm_created(struct bfa_rport_s *rp, enum bfa_rport_event event)
 
 	default:
 		bfa_stats(rp, sm_cr_unexp);
-		bfa_assert(0);
+		bfa_sm_fault(rp->bfa, event);
 	}
 }
 
@@ -183,7 +183,7 @@ bfa_rport_sm_fwcreate(struct bfa_rport_s *rp, enum bfa_rport_event event)
 
 	default:
 		bfa_stats(rp, sm_fwc_unexp);
-		bfa_assert(0);
+		bfa_sm_fault(rp->bfa, event);
 	}
 }
 
@@ -224,7 +224,7 @@ bfa_rport_sm_fwcreate_qfull(struct bfa_rport_s *rp, enum bfa_rport_event event)
 
 	default:
 		bfa_stats(rp, sm_fwc_unexp);
-		bfa_assert(0);
+		bfa_sm_fault(rp->bfa, event);
 	}
 }
 
@@ -296,7 +296,7 @@ bfa_rport_sm_online(struct bfa_rport_s *rp, enum bfa_rport_event event)
 
 	default:
 		bfa_stats(rp, sm_on_unexp);
-		bfa_assert(0);
+		bfa_sm_fault(rp->bfa, event);
 	}
 }
 
@@ -329,7 +329,7 @@ bfa_rport_sm_fwdelete(struct bfa_rport_s *rp, enum bfa_rport_event event)
 
 	default:
 		bfa_stats(rp, sm_fwd_unexp);
-		bfa_assert(0);
+		bfa_sm_fault(rp->bfa, event);
 	}
 }
 
@@ -359,7 +359,7 @@ bfa_rport_sm_fwdelete_qfull(struct bfa_rport_s *rp, enum bfa_rport_event event)
 
 	default:
 		bfa_stats(rp, sm_fwd_unexp);
-		bfa_assert(0);
+		bfa_sm_fault(rp->bfa, event);
 	}
 }
 
@@ -394,7 +394,7 @@ bfa_rport_sm_offline(struct bfa_rport_s *rp, enum bfa_rport_event event)
 
 	default:
 		bfa_stats(rp, sm_off_unexp);
-		bfa_assert(0);
+		bfa_sm_fault(rp->bfa, event);
 	}
 }
 
@@ -421,7 +421,7 @@ bfa_rport_sm_deleting(struct bfa_rport_s *rp, enum bfa_rport_event event)
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(rp->bfa, event);
 	}
 }
 
@@ -446,7 +446,7 @@ bfa_rport_sm_deleting_qfull(struct bfa_rport_s *rp, enum bfa_rport_event event)
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(rp->bfa, event);
 	}
 }
 
@@ -477,7 +477,7 @@ bfa_rport_sm_delete_pending(struct bfa_rport_s *rp,
 
 	default:
 		bfa_stats(rp, sm_delp_unexp);
-		bfa_assert(0);
+		bfa_sm_fault(rp->bfa, event);
 	}
 }
 
@@ -512,7 +512,7 @@ bfa_rport_sm_offline_pending(struct bfa_rport_s *rp,
 
 	default:
 		bfa_stats(rp, sm_offp_unexp);
-		bfa_assert(0);
+		bfa_sm_fault(rp->bfa, event);
 	}
 }
 
@@ -550,7 +550,7 @@ bfa_rport_sm_iocdisable(struct bfa_rport_s *rp, enum bfa_rport_event event)
 
 	default:
 		bfa_stats(rp, sm_iocd_unexp);
-		bfa_assert(0);
+		bfa_sm_fault(rp->bfa, event);
 	}
 }
 
diff --git a/drivers/scsi/bfa/bfa_trcmod_priv.h b/drivers/scsi/bfa/bfa_trcmod_priv.h
index b3562dce7e9f..a7a82610db85 100644
--- a/drivers/scsi/bfa/bfa_trcmod_priv.h
+++ b/drivers/scsi/bfa/bfa_trcmod_priv.h
@@ -29,38 +29,36 @@
  * !!! needed between trace utility and driver version
  */
 enum {
-	BFA_TRC_HAL_IOC		= 1,
-	BFA_TRC_HAL_INTR	= 2,
-	BFA_TRC_HAL_FCXP	= 3,
-	BFA_TRC_HAL_UF		= 4,
-	BFA_TRC_HAL_DIAG	= 5,
-	BFA_TRC_HAL_RPORT	= 6,
-	BFA_TRC_HAL_FCPIM	= 7,
-	BFA_TRC_HAL_IOIM	= 8,
-	BFA_TRC_HAL_TSKIM	= 9,
-	BFA_TRC_HAL_ITNIM	= 10,
-	BFA_TRC_HAL_PPORT	= 11,
-	BFA_TRC_HAL_SGPG	= 12,
-	BFA_TRC_HAL_FLASH	= 13,
-	BFA_TRC_HAL_DEBUG	= 14,
-	BFA_TRC_HAL_WWN		= 15,
-	BFA_TRC_HAL_FLASH_RAW	= 16,
-	BFA_TRC_HAL_SBOOT	= 17,
-	BFA_TRC_HAL_SBOOT_IO	= 18,
-	BFA_TRC_HAL_SBOOT_INTR	= 19,
-	BFA_TRC_HAL_SBTEST	= 20,
-	BFA_TRC_HAL_IPFC	= 21,
-	BFA_TRC_HAL_IOCFC	= 22,
-	BFA_TRC_HAL_FCPTM	= 23,
-	BFA_TRC_HAL_IOTM	= 24,
-	BFA_TRC_HAL_TSKTM	= 25,
-	BFA_TRC_HAL_TIN		= 26,
-	BFA_TRC_HAL_LPS		= 27,
-	BFA_TRC_HAL_FCDIAG	= 28,
-	BFA_TRC_HAL_PBIND	= 29,
-	BFA_TRC_HAL_IOCFC_CT	= 30,
-	BFA_TRC_HAL_IOCFC_CB	= 31,
-	BFA_TRC_HAL_IOCFC_Q	= 32,
+	BFA_TRC_HAL_INTR	= 1,
+	BFA_TRC_HAL_FCXP	= 2,
+	BFA_TRC_HAL_UF		= 3,
+	BFA_TRC_HAL_RPORT	= 4,
+	BFA_TRC_HAL_FCPIM	= 5,
+	BFA_TRC_HAL_IOIM	= 6,
+	BFA_TRC_HAL_TSKIM	= 7,
+	BFA_TRC_HAL_ITNIM	= 8,
+	BFA_TRC_HAL_FCPORT	= 9,
+	BFA_TRC_HAL_SGPG	= 10,
+	BFA_TRC_HAL_FLASH	= 11,
+	BFA_TRC_HAL_DEBUG	= 12,
+	BFA_TRC_HAL_WWN		= 13,
+	BFA_TRC_HAL_FLASH_RAW	= 14,
+	BFA_TRC_HAL_SBOOT	= 15,
+	BFA_TRC_HAL_SBOOT_IO	= 16,
+	BFA_TRC_HAL_SBOOT_INTR	= 17,
+	BFA_TRC_HAL_SBTEST	= 18,
+	BFA_TRC_HAL_IPFC	= 19,
+	BFA_TRC_HAL_IOCFC	= 20,
+	BFA_TRC_HAL_FCPTM	= 21,
+	BFA_TRC_HAL_IOTM	= 22,
+	BFA_TRC_HAL_TSKTM	= 23,
+	BFA_TRC_HAL_TIN		= 24,
+	BFA_TRC_HAL_LPS		= 25,
+	BFA_TRC_HAL_FCDIAG	= 26,
+	BFA_TRC_HAL_PBIND	= 27,
+	BFA_TRC_HAL_IOCFC_CT	= 28,
+	BFA_TRC_HAL_IOCFC_CB	= 29,
+	BFA_TRC_HAL_IOCFC_Q	= 30,
 };
 
 #endif /* __BFA_TRCMOD_PRIV_H__ */
diff --git a/drivers/scsi/bfa/bfa_tskim.c b/drivers/scsi/bfa/bfa_tskim.c
index ff7a4dc0bf3c..ad9aaaedd3f1 100644
--- a/drivers/scsi/bfa/bfa_tskim.c
+++ b/drivers/scsi/bfa/bfa_tskim.c
@@ -110,7 +110,7 @@ bfa_tskim_sm_uninit(struct bfa_tskim_s *tskim, enum bfa_tskim_event event)
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(tskim->bfa, event);
 	}
 }
 
@@ -146,7 +146,7 @@ bfa_tskim_sm_active(struct bfa_tskim_s *tskim, enum bfa_tskim_event event)
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(tskim->bfa, event);
 	}
 }
 
@@ -178,7 +178,7 @@ bfa_tskim_sm_cleanup(struct bfa_tskim_s *tskim, enum bfa_tskim_event event)
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(tskim->bfa, event);
 	}
 }
 
@@ -207,7 +207,7 @@ bfa_tskim_sm_iocleanup(struct bfa_tskim_s *tskim, enum bfa_tskim_event event)
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(tskim->bfa, event);
 	}
 }
 
@@ -242,7 +242,7 @@ bfa_tskim_sm_qfull(struct bfa_tskim_s *tskim, enum bfa_tskim_event event)
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(tskim->bfa, event);
 	}
 }
 
@@ -277,7 +277,7 @@ bfa_tskim_sm_cleanup_qfull(struct bfa_tskim_s *tskim,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(tskim->bfa, event);
 	}
 }
 
@@ -303,7 +303,7 @@ bfa_tskim_sm_hcb(struct bfa_tskim_s *tskim, enum bfa_tskim_event event)
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(tskim->bfa, event);
 	}
 }
 
diff --git a/drivers/scsi/bfa/bfad.c b/drivers/scsi/bfa/bfad.c
index b52b773d49d9..6bff08ea4029 100644
--- a/drivers/scsi/bfa/bfad.c
+++ b/drivers/scsi/bfa/bfad.c
@@ -20,6 +20,7 @@
  */
 
 #include <linux/module.h>
+#include <linux/kthread.h>
 #include "bfad_drv.h"
 #include "bfad_im.h"
 #include "bfad_tm.h"
@@ -53,6 +54,7 @@ static int      log_level = BFA_LOG_WARNING;
 static int      ioc_auto_recover = BFA_TRUE;
 static int      ipfc_enable = BFA_FALSE;
 static int      ipfc_mtu = -1;
+static int	fdmi_enable = BFA_TRUE;
 int 		bfa_lun_queue_depth = BFAD_LUN_QUEUE_DEPTH;
 int      	bfa_linkup_delay = -1;
 
@@ -74,6 +76,7 @@ module_param(log_level, int, S_IRUGO | S_IWUSR);
 module_param(ioc_auto_recover, int, S_IRUGO | S_IWUSR);
 module_param(ipfc_enable, int, S_IRUGO | S_IWUSR);
 module_param(ipfc_mtu, int, S_IRUGO | S_IWUSR);
+module_param(fdmi_enable, int, S_IRUGO | S_IWUSR);
 module_param(bfa_linkup_delay, int, S_IRUGO | S_IWUSR);
 
 /*
@@ -95,6 +98,8 @@ bfad_fc4_probe(struct bfad_s *bfad)
 
 	if (ipfc_enable)
 		bfad_ipfc_probe(bfad);
+
+	bfad->bfad_flags |= BFAD_FC4_PROBE_DONE;
 ext:
 	return rc;
 }
@@ -106,6 +111,7 @@ bfad_fc4_probe_undo(struct bfad_s *bfad)
 	bfad_tm_probe_undo(bfad);
 	if (ipfc_enable)
 		bfad_ipfc_probe_undo(bfad);
+	bfad->bfad_flags &= ~BFAD_FC4_PROBE_DONE;
 }
 
 static void
@@ -173,9 +179,19 @@ bfa_cb_init(void *drv, bfa_status_t init_status)
 {
 	struct bfad_s  *bfad = drv;
 
-	if (init_status == BFA_STATUS_OK)
+	if (init_status == BFA_STATUS_OK) {
 		bfad->bfad_flags |= BFAD_HAL_INIT_DONE;
 
+		/* If BFAD_HAL_INIT_FAIL flag is set:
+		 * Wake up the kernel thread to start
+		 * the bfad operations after HAL init done
+		 */
+		if ((bfad->bfad_flags & BFAD_HAL_INIT_FAIL)) {
+			bfad->bfad_flags &= ~BFAD_HAL_INIT_FAIL;
+			wake_up_process(bfad->bfad_tsk);
+		}
+	}
+
 	complete(&bfad->comp);
 }
 
@@ -648,7 +664,7 @@ bfad_fcs_port_cfg(struct bfad_s *bfad)
 
 	sprintf(symname, "%s-%d", BFAD_DRIVER_NAME, bfad->inst_no);
 	memcpy(port_cfg.sym_name.symname, symname, strlen(symname));
-	bfa_pport_get_attr(&bfad->bfa, &attr);
+	bfa_fcport_get_attr(&bfad->bfa, &attr);
 	port_cfg.nwwn = attr.nwwn;
 	port_cfg.pwwn = attr.pwwn;
 
@@ -661,7 +677,6 @@ bfad_drv_init(struct bfad_s *bfad)
 	bfa_status_t    rc;
 	unsigned long   flags;
 	struct bfa_fcs_driver_info_s driver_info;
-	int             i;
 
 	bfad->cfg_data.rport_del_timeout = rport_del_timeout;
 	bfad->cfg_data.lun_queue_depth = bfa_lun_queue_depth;
@@ -681,12 +696,7 @@ bfad_drv_init(struct bfad_s *bfad)
 	bfa_init_log(&bfad->bfa, bfad->logmod);
 	bfa_init_trc(&bfad->bfa, bfad->trcmod);
 	bfa_init_aen(&bfad->bfa, bfad->aen);
-	INIT_LIST_HEAD(&bfad->file_q);
-	INIT_LIST_HEAD(&bfad->file_free_q);
-	for (i = 0; i < BFAD_AEN_MAX_APPS; i++) {
-		bfa_q_qe_init(&bfad->file_buf[i].qe);
-		list_add_tail(&bfad->file_buf[i].qe, &bfad->file_free_q);
-	}
+	memset(bfad->file_map, 0, sizeof(bfad->file_map));
 	bfa_init_plog(&bfad->bfa, &bfad->plog_buf);
 	bfa_plog_init(&bfad->plog_buf);
 	bfa_plog_str(&bfad->plog_buf, BFA_PL_MID_DRVR, BFA_PL_EID_DRIVER_START,
@@ -746,8 +756,16 @@ bfad_drv_init(struct bfad_s *bfad)
 	bfa_fcs_log_init(&bfad->bfa_fcs, bfad->logmod);
 	bfa_fcs_trc_init(&bfad->bfa_fcs, bfad->trcmod);
 	bfa_fcs_aen_init(&bfad->bfa_fcs, bfad->aen);
-	bfa_fcs_init(&bfad->bfa_fcs, &bfad->bfa, bfad, BFA_FALSE);
+	bfa_fcs_attach(&bfad->bfa_fcs, &bfad->bfa, bfad, BFA_FALSE);
+
+	/* Do FCS init only when HAL init is done */
+	if ((bfad->bfad_flags & BFAD_HAL_INIT_DONE)) {
+		bfa_fcs_init(&bfad->bfa_fcs);
+		bfad->bfad_flags |= BFAD_FCS_INIT_DONE;
+	}
+
 	bfa_fcs_driver_info_init(&bfad->bfa_fcs, &driver_info);
+	bfa_fcs_set_fdmi_param(&bfad->bfa_fcs, fdmi_enable);
 	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
 
 	bfad->bfad_flags |= BFAD_DRV_INIT_DONE;
@@ -763,12 +781,21 @@ out_hal_mem_alloc_failure:
 void
 bfad_drv_uninit(struct bfad_s *bfad)
 {
+	unsigned long   flags;
+
+	spin_lock_irqsave(&bfad->bfad_lock, flags);
+	init_completion(&bfad->comp);
+	bfa_stop(&bfad->bfa);
+	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+	wait_for_completion(&bfad->comp);
+
 	del_timer_sync(&bfad->hal_tmo);
 	bfa_isr_disable(&bfad->bfa);
 	bfa_detach(&bfad->bfa);
 	bfad_remove_intr(bfad);
-	bfa_assert(list_empty(&bfad->file_q));
 	bfad_hal_mem_release(bfad);
+
+	bfad->bfad_flags &= ~BFAD_DRV_INIT_DONE;
 }
 
 void
@@ -859,6 +886,86 @@ bfad_drv_log_level_set(struct bfad_s *bfad)
 		bfa_log_set_level_all(&bfad->log_data, log_level);
 }
 
+bfa_status_t
+bfad_start_ops(struct bfad_s *bfad)
+{
+	int retval;
+
+	/* PPORT FCS config */
+	bfad_fcs_port_cfg(bfad);
+
+	retval = bfad_cfg_pport(bfad, BFA_PORT_ROLE_FCP_IM);
+	if (retval != BFA_STATUS_OK)
+		goto out_cfg_pport_failure;
+
+	/* BFAD level FC4 (IM/TM/IPFC) specific resource allocation */
+	retval = bfad_fc4_probe(bfad);
+	if (retval != BFA_STATUS_OK) {
+		printk(KERN_WARNING "bfad_fc4_probe failed\n");
+		goto out_fc4_probe_failure;
+	}
+
+	bfad_drv_start(bfad);
+
+	/*
+	 * If bfa_linkup_delay is set to -1 default; try to retrive the
+	 * value using the bfad_os_get_linkup_delay(); else use the
+	 * passed in module param value as the bfa_linkup_delay.
+	 */
+	if (bfa_linkup_delay < 0) {
+
+		bfa_linkup_delay = bfad_os_get_linkup_delay(bfad);
+		bfad_os_rport_online_wait(bfad);
+		bfa_linkup_delay = -1;
+
+	} else {
+		bfad_os_rport_online_wait(bfad);
+	}
+
+	bfa_log(bfad->logmod, BFA_LOG_LINUX_DEVICE_CLAIMED, bfad->pci_name);
+
+	return BFA_STATUS_OK;
+
+out_fc4_probe_failure:
+	bfad_fc4_probe_undo(bfad);
+	bfad_uncfg_pport(bfad);
+out_cfg_pport_failure:
+	return BFA_STATUS_FAILED;
+}
+
+int
+bfad_worker (void *ptr)
+{
+	struct bfad_s *bfad;
+	unsigned long   flags;
+
+	bfad = (struct bfad_s *)ptr;
+
+	while (!kthread_should_stop()) {
+
+		/* Check if the FCS init is done from bfad_drv_init;
+		 * if not done do FCS init and set the flag.
+		 */
+		if (!(bfad->bfad_flags & BFAD_FCS_INIT_DONE)) {
+			spin_lock_irqsave(&bfad->bfad_lock, flags);
+			bfa_fcs_init(&bfad->bfa_fcs);
+			bfad->bfad_flags |= BFAD_FCS_INIT_DONE;
+			spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+		}
+
+		/* Start the bfad operations after HAL init done */
+		bfad_start_ops(bfad);
+
+		spin_lock_irqsave(&bfad->bfad_lock, flags);
+		bfad->bfad_tsk = NULL;
+		spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+
+		break;
+	}
+
+	return 0;
+}
+
  /*
   *  PCI_entry PCI driver entries * {
   */
@@ -871,7 +978,6 @@ bfad_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pid)
 {
 	struct bfad_s  *bfad;
 	int             error = -ENODEV, retval;
-	char            buf[16];
 
 	/*
 	 * For single port cards - only claim function 0
@@ -902,8 +1008,7 @@ bfad_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pid)
 	bfa_trc(bfad, bfad_inst);
 
 	bfad->logmod = &bfad->log_data;
-	sprintf(buf, "%d", bfad_inst);
-	bfa_log_init(bfad->logmod, buf, bfa_os_printf);
+	bfa_log_init(bfad->logmod, (char *)pci_name(pdev), bfa_os_printf);
 
 	bfad_drv_log_level_set(bfad);
 
@@ -933,57 +1038,39 @@ bfad_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pid)
 	bfad->ref_count = 0;
 	bfad->pport.bfad = bfad;
 
+	bfad->bfad_tsk = kthread_create(bfad_worker, (void *) bfad, "%s",
+					"bfad_worker");
+	if (IS_ERR(bfad->bfad_tsk)) {
+		printk(KERN_INFO "bfad[%d]: Kernel thread"
+			" creation failed!\n",
+			bfad->inst_no);
+		goto out_kthread_create_failure;
+	}
+
 	retval = bfad_drv_init(bfad);
 	if (retval != BFA_STATUS_OK)
 		goto out_drv_init_failure;
 	if (!(bfad->bfad_flags & BFAD_HAL_INIT_DONE)) {
+		bfad->bfad_flags |= BFAD_HAL_INIT_FAIL;
 		printk(KERN_WARNING "bfad%d: hal init failed\n", bfad->inst_no);
 		goto ok;
 	}
 
-	/*
-	 * PPORT FCS config
-	 */
-	bfad_fcs_port_cfg(bfad);
-
-	retval = bfad_cfg_pport(bfad, BFA_PORT_ROLE_FCP_IM);
+	retval = bfad_start_ops(bfad);
 	if (retval != BFA_STATUS_OK)
-		goto out_cfg_pport_failure;
-
-	/*
-	 * BFAD level FC4 (IM/TM/IPFC) specific resource allocation
-	 */
-	retval = bfad_fc4_probe(bfad);
-	if (retval != BFA_STATUS_OK) {
-		printk(KERN_WARNING "bfad_fc4_probe failed\n");
-		goto out_fc4_probe_failure;
-	}
+		goto out_start_ops_failure;
 
-	bfad_drv_start(bfad);
-
-	/*
-	 * If bfa_linkup_delay is set to -1 default; try to retrive the
-	 * value using the bfad_os_get_linkup_delay(); else use the
-	 * passed in module param value as the bfa_linkup_delay.
-	 */
-	if (bfa_linkup_delay < 0) {
-		bfa_linkup_delay = bfad_os_get_linkup_delay(bfad);
-		bfad_os_rport_online_wait(bfad);
-		bfa_linkup_delay = -1;
-	} else {
-		bfad_os_rport_online_wait(bfad);
-	}
+	kthread_stop(bfad->bfad_tsk);
+	bfad->bfad_tsk = NULL;
 
-	bfa_log(bfad->logmod, BFA_LOG_LINUX_DEVICE_CLAIMED, bfad->pci_name);
 ok:
 	return 0;
 
-out_fc4_probe_failure:
-	bfad_fc4_probe_undo(bfad);
-	bfad_uncfg_pport(bfad);
-out_cfg_pport_failure:
+out_start_ops_failure:
 	bfad_drv_uninit(bfad);
 out_drv_init_failure:
+	kthread_stop(bfad->bfad_tsk);
+out_kthread_create_failure:
 	mutex_lock(&bfad_mutex);
 	bfad_inst--;
 	list_del(&bfad->list_entry);
@@ -1008,6 +1095,11 @@ bfad_pci_remove(struct pci_dev *pdev)
 
 	bfa_trc(bfad, bfad->inst_no);
 
+	spin_lock_irqsave(&bfad->bfad_lock, flags);
+	if (bfad->bfad_tsk != NULL)
+		kthread_stop(bfad->bfad_tsk);
+	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+
 	if ((bfad->bfad_flags & BFAD_DRV_INIT_DONE)
 	    && !(bfad->bfad_flags & BFAD_HAL_INIT_DONE)) {
 
@@ -1024,13 +1116,25 @@ bfad_pci_remove(struct pci_dev *pdev)
 		goto remove_sysfs;
 	}
 
-	if (bfad->bfad_flags & BFAD_HAL_START_DONE)
+	if (bfad->bfad_flags & BFAD_HAL_START_DONE) {
 		bfad_drv_stop(bfad);
+	} else if (bfad->bfad_flags & BFAD_DRV_INIT_DONE) {
+		/* Invoking bfa_stop() before bfa_detach
+		 * when HAL and DRV init are success
+		 * but HAL start did not occur.
+		 */
+		spin_lock_irqsave(&bfad->bfad_lock, flags);
+		init_completion(&bfad->comp);
+		bfa_stop(&bfad->bfa);
+		spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+		wait_for_completion(&bfad->comp);
+	}
 
 	bfad_remove_intr(bfad);
-
 	del_timer_sync(&bfad->hal_tmo);
-	bfad_fc4_probe_undo(bfad);
+
+	if (bfad->bfad_flags & BFAD_FC4_PROBE_DONE)
+		bfad_fc4_probe_undo(bfad);
 
 	if (bfad->bfad_flags & BFAD_CFG_PPORT_DONE)
 		bfad_uncfg_pport(bfad);
diff --git a/drivers/scsi/bfa/bfad_attr.c b/drivers/scsi/bfa/bfad_attr.c
index 9129ae3040ff..d97f69191838 100644
--- a/drivers/scsi/bfa/bfad_attr.c
+++ b/drivers/scsi/bfa/bfad_attr.c
@@ -141,7 +141,7 @@ bfad_im_get_host_port_type(struct Scsi_Host *shost)
 	struct bfad_s         *bfad = im_port->bfad;
 	struct bfa_pport_attr_s attr;
 
-	bfa_pport_get_attr(&bfad->bfa, &attr);
+	bfa_fcport_get_attr(&bfad->bfa, &attr);
 
 	switch (attr.port_type) {
 	case BFA_PPORT_TYPE_NPORT:
@@ -173,7 +173,7 @@ bfad_im_get_host_port_state(struct Scsi_Host *shost)
 	struct bfad_s         *bfad = im_port->bfad;
 	struct bfa_pport_attr_s attr;
 
-	bfa_pport_get_attr(&bfad->bfa, &attr);
+	bfa_fcport_get_attr(&bfad->bfa, &attr);
 
 	switch (attr.port_state) {
 	case BFA_PPORT_ST_LINKDOWN:
@@ -229,8 +229,10 @@ bfad_im_get_host_speed(struct Scsi_Host *shost)
 			(struct bfad_im_port_s *) shost->hostdata[0];
 	struct bfad_s         *bfad = im_port->bfad;
 	struct bfa_pport_attr_s attr;
+	unsigned long   flags;
 
-	bfa_pport_get_attr(&bfad->bfa, &attr);
+	spin_lock_irqsave(shost->host_lock, flags);
+	bfa_fcport_get_attr(&bfad->bfa, &attr);
 	switch (attr.speed) {
 	case BFA_PPORT_SPEED_8GBPS:
 		fc_host_speed(shost) = FC_PORTSPEED_8GBIT;
@@ -248,6 +250,7 @@ bfad_im_get_host_speed(struct Scsi_Host *shost)
 		fc_host_speed(shost) = FC_PORTSPEED_UNKNOWN;
 		break;
 	}
+	spin_unlock_irqrestore(shost->host_lock, flags);
 }
 
 /**
@@ -285,7 +288,7 @@ bfad_im_get_stats(struct Scsi_Host *shost)
 	init_completion(&fcomp.comp);
 	spin_lock_irqsave(&bfad->bfad_lock, flags);
 	memset(hstats, 0, sizeof(struct fc_host_statistics));
-	rc = bfa_pport_get_stats(&bfad->bfa,
+	rc =  bfa_port_get_stats(BFA_FCPORT(&bfad->bfa),
 				     (union bfa_pport_stats_u *) hstats,
 				     bfad_hcb_comp, &fcomp);
 	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
@@ -312,7 +315,8 @@ bfad_im_reset_stats(struct Scsi_Host *shost)
 
 	init_completion(&fcomp.comp);
 	spin_lock_irqsave(&bfad->bfad_lock, flags);
-	rc = bfa_pport_clear_stats(&bfad->bfa, bfad_hcb_comp, &fcomp);
+	rc = bfa_port_clear_stats(BFA_FCPORT(&bfad->bfa), bfad_hcb_comp,
+		&fcomp);
 	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
 
 	if (rc != BFA_STATUS_OK)
@@ -421,12 +425,10 @@ bfad_im_serial_num_show(struct device *dev, struct device_attribute *attr,
 	struct bfad_im_port_s *im_port =
 			(struct bfad_im_port_s *) shost->hostdata[0];
 	struct bfad_s         *bfad = im_port->bfad;
-	struct bfa_ioc_attr_s  ioc_attr;
+	char serial_num[BFA_ADAPTER_SERIAL_NUM_LEN];
 
-	memset(&ioc_attr, 0, sizeof(ioc_attr));
-	bfa_get_attr(&bfad->bfa, &ioc_attr);
-	return snprintf(buf, PAGE_SIZE, "%s\n",
-			ioc_attr.adapter_attr.serial_num);
+	bfa_get_adapter_serial_num(&bfad->bfa, serial_num);
+	return snprintf(buf, PAGE_SIZE, "%s\n", serial_num);
 }
 
 static ssize_t
@@ -437,11 +439,10 @@ bfad_im_model_show(struct device *dev, struct device_attribute *attr,
 	struct bfad_im_port_s *im_port =
 			(struct bfad_im_port_s *) shost->hostdata[0];
 	struct bfad_s         *bfad = im_port->bfad;
-	struct bfa_ioc_attr_s  ioc_attr;
+	char model[BFA_ADAPTER_MODEL_NAME_LEN];
 
-	memset(&ioc_attr, 0, sizeof(ioc_attr));
-	bfa_get_attr(&bfad->bfa, &ioc_attr);
-	return snprintf(buf, PAGE_SIZE, "%s\n", ioc_attr.adapter_attr.model);
+	bfa_get_adapter_model(&bfad->bfa, model);
+	return snprintf(buf, PAGE_SIZE, "%s\n", model);
 }
 
 static ssize_t
@@ -452,12 +453,10 @@ bfad_im_model_desc_show(struct device *dev, struct device_attribute *attr,
 	struct bfad_im_port_s *im_port =
 			(struct bfad_im_port_s *) shost->hostdata[0];
 	struct bfad_s         *bfad = im_port->bfad;
-	struct bfa_ioc_attr_s  ioc_attr;
+	char model_descr[BFA_ADAPTER_MODEL_DESCR_LEN];
 
-	memset(&ioc_attr, 0, sizeof(ioc_attr));
-	bfa_get_attr(&bfad->bfa, &ioc_attr);
-	return snprintf(buf, PAGE_SIZE, "%s\n",
-			ioc_attr.adapter_attr.model_descr);
+	bfa_get_adapter_model(&bfad->bfa, model_descr);
+	return snprintf(buf, PAGE_SIZE, "%s\n", model_descr);
 }
 
 static ssize_t
@@ -482,14 +481,13 @@ bfad_im_symbolic_name_show(struct device *dev, struct device_attribute *attr,
 	struct bfad_im_port_s *im_port =
 			(struct bfad_im_port_s *) shost->hostdata[0];
 	struct bfad_s         *bfad = im_port->bfad;
-	struct bfa_ioc_attr_s  ioc_attr;
-
-	memset(&ioc_attr, 0, sizeof(ioc_attr));
-	bfa_get_attr(&bfad->bfa, &ioc_attr);
+	char model[BFA_ADAPTER_MODEL_NAME_LEN];
+	char fw_ver[BFA_VERSION_LEN];
 
+	bfa_get_adapter_model(&bfad->bfa, model);
+	bfa_get_adapter_fw_ver(&bfad->bfa, fw_ver);
 	return snprintf(buf, PAGE_SIZE, "Brocade %s FV%s DV%s\n",
-			ioc_attr.adapter_attr.model,
-			ioc_attr.adapter_attr.fw_ver, BFAD_DRIVER_VERSION);
+		model, fw_ver, BFAD_DRIVER_VERSION);
 }
 
 static ssize_t
@@ -500,11 +498,10 @@ bfad_im_hw_version_show(struct device *dev, struct device_attribute *attr,
 	struct bfad_im_port_s *im_port =
 			(struct bfad_im_port_s *) shost->hostdata[0];
 	struct bfad_s         *bfad = im_port->bfad;
-	struct bfa_ioc_attr_s  ioc_attr;
+	char hw_ver[BFA_VERSION_LEN];
 
-	memset(&ioc_attr, 0, sizeof(ioc_attr));
-	bfa_get_attr(&bfad->bfa, &ioc_attr);
-	return snprintf(buf, PAGE_SIZE, "%s\n", ioc_attr.adapter_attr.hw_ver);
+	bfa_get_pci_chip_rev(&bfad->bfa, hw_ver);
+	return snprintf(buf, PAGE_SIZE, "%s\n", hw_ver);
 }
 
 static ssize_t
@@ -522,12 +519,10 @@ bfad_im_optionrom_version_show(struct device *dev,
 	struct bfad_im_port_s *im_port =
 			(struct bfad_im_port_s *) shost->hostdata[0];
 	struct bfad_s         *bfad = im_port->bfad;
-	struct bfa_ioc_attr_s  ioc_attr;
+	char optrom_ver[BFA_VERSION_LEN];
 
-	memset(&ioc_attr, 0, sizeof(ioc_attr));
-	bfa_get_attr(&bfad->bfa, &ioc_attr);
-	return snprintf(buf, PAGE_SIZE, "%s\n",
-			ioc_attr.adapter_attr.optrom_ver);
+	bfa_get_adapter_optrom_ver(&bfad->bfa, optrom_ver);
+	return snprintf(buf, PAGE_SIZE, "%s\n", optrom_ver);
 }
 
 static ssize_t
@@ -538,11 +533,10 @@ bfad_im_fw_version_show(struct device *dev, struct device_attribute *attr,
 	struct bfad_im_port_s *im_port =
 			(struct bfad_im_port_s *) shost->hostdata[0];
 	struct bfad_s         *bfad = im_port->bfad;
-	struct bfa_ioc_attr_s  ioc_attr;
+	char fw_ver[BFA_VERSION_LEN];
 
-	memset(&ioc_attr, 0, sizeof(ioc_attr));
-	bfa_get_attr(&bfad->bfa, &ioc_attr);
-	return snprintf(buf, PAGE_SIZE, "%s\n", ioc_attr.adapter_attr.fw_ver);
+	bfa_get_adapter_fw_ver(&bfad->bfa, fw_ver);
+	return snprintf(buf, PAGE_SIZE, "%s\n", fw_ver);
 }
 
 static ssize_t
@@ -553,11 +547,9 @@ bfad_im_num_of_ports_show(struct device *dev, struct device_attribute *attr,
 	struct bfad_im_port_s *im_port =
 			(struct bfad_im_port_s *) shost->hostdata[0];
 	struct bfad_s         *bfad = im_port->bfad;
-	struct bfa_ioc_attr_s  ioc_attr;
 
-	memset(&ioc_attr, 0, sizeof(ioc_attr));
-	bfa_get_attr(&bfad->bfa, &ioc_attr);
-	return snprintf(buf, PAGE_SIZE, "%d\n", ioc_attr.adapter_attr.nports);
+	return snprintf(buf, PAGE_SIZE, "%d\n",
+		bfa_get_nports(&bfad->bfa));
 }
 
 static ssize_t
diff --git a/drivers/scsi/bfa/bfad_attr.h b/drivers/scsi/bfa/bfad_attr.h
index 4d3312da6a81..bf0102076508 100644
--- a/drivers/scsi/bfa/bfad_attr.h
+++ b/drivers/scsi/bfa/bfad_attr.h
@@ -17,9 +17,6 @@
 
 #ifndef __BFAD_ATTR_H__
 #define __BFAD_ATTR_H__
-/**
- *  bfad_attr.h VMware driver configuration interface module.
- */
 
 /**
  *  FC_transport_template FC transport template
@@ -52,12 +49,6 @@ bfad_im_get_starget_port_name(struct scsi_target *starget);
 void
 bfad_im_get_host_port_id(struct Scsi_Host *shost);
 
-/**
- * FC transport template entry, issue a LIP.
- */
-int
-bfad_im_issue_fc_host_lip(struct Scsi_Host *shost);
-
 struct Scsi_Host*
 bfad_os_starget_to_shost(struct scsi_target *starget);
 
diff --git a/drivers/scsi/bfa/bfad_drv.h b/drivers/scsi/bfa/bfad_drv.h
index 172c81e25c1c..107848cd3b6d 100644
--- a/drivers/scsi/bfa/bfad_drv.h
+++ b/drivers/scsi/bfa/bfad_drv.h
@@ -46,7 +46,7 @@
 #ifdef BFA_DRIVER_VERSION
 #define BFAD_DRIVER_VERSION    BFA_DRIVER_VERSION
 #else
-#define BFAD_DRIVER_VERSION    "2.0.0.0"
+#define BFAD_DRIVER_VERSION    "2.1.2.1"
 #endif
 
 
@@ -62,7 +62,9 @@
 #define BFAD_HAL_START_DONE			0x00000010
 #define BFAD_PORT_ONLINE			0x00000020
 #define BFAD_RPORT_ONLINE			0x00000040
-
+#define BFAD_FCS_INIT_DONE                      0x00000080
+#define BFAD_HAL_INIT_FAIL                      0x00000100
+#define BFAD_FC4_PROBE_DONE                     0x00000200
 #define BFAD_PORT_DELETE			0x00000001
 
 /*
@@ -137,12 +139,16 @@ struct bfad_cfg_param_s {
 	u32        binding_method;
 };
 
-#define BFAD_AEN_MAX_APPS 8
-struct bfad_aen_file_s {
-	struct list_head  qe;
-	struct bfad_s *bfad;
-	s32 ri;
-	s32 app_id;
+union bfad_tmp_buf {
+	/* From struct bfa_adapter_attr_s */
+	char            manufacturer[BFA_ADAPTER_MFG_NAME_LEN];
+	char            serial_num[BFA_ADAPTER_SERIAL_NUM_LEN];
+	char            model[BFA_ADAPTER_MODEL_NAME_LEN];
+	char            fw_ver[BFA_VERSION_LEN];
+	char            optrom_ver[BFA_VERSION_LEN];
+
+	/* From struct bfa_ioc_pci_attr_s */
+	u8         chip_rev[BFA_IOC_CHIP_REV_LEN];  /*  chip revision */
 };
 
 /*
@@ -168,6 +174,7 @@ struct bfad_s {
 	u32        inst_no;	/* BFAD instance number */
 	u32        bfad_flags;
 	spinlock_t      bfad_lock;
+	struct task_struct *bfad_tsk;
 	struct bfad_cfg_param_s cfg_data;
 	struct bfad_msix_s msix_tab[MAX_MSIX_ENTRY];
 	int             nvec;
@@ -183,18 +190,12 @@ struct bfad_s {
 	struct bfa_log_mod_s  *logmod;
 	struct bfa_aen_s      *aen;
 	struct bfa_aen_s       aen_buf;
-	struct bfad_aen_file_s file_buf[BFAD_AEN_MAX_APPS];
-	struct list_head         file_q;
-	struct list_head         file_free_q;
+	void		*file_map[BFA_AEN_MAX_APP];
 	struct bfa_plog_s      plog_buf;
 	int             ref_count;
 	bfa_boolean_t	ipfc_enabled;
+	union bfad_tmp_buf tmp_buf;
 	struct fc_host_statistics link_stats;
-
-	struct kobject *bfa_kobj;
-	struct kobject *ioc_kobj;
-	struct kobject *pport_kobj;
-	struct kobject *lport_kobj;
 };
 
 /*
@@ -258,6 +259,7 @@ bfa_status_t    bfad_vf_create(struct bfad_s *bfad, u16 vf_id,
 			       struct bfa_port_cfg_s *port_cfg);
 bfa_status_t    bfad_cfg_pport(struct bfad_s *bfad, enum bfa_port_role role);
 bfa_status_t    bfad_drv_init(struct bfad_s *bfad);
+bfa_status_t	bfad_start_ops(struct bfad_s *bfad);
 void            bfad_drv_start(struct bfad_s *bfad);
 void            bfad_uncfg_pport(struct bfad_s *bfad);
 void            bfad_drv_stop(struct bfad_s *bfad);
@@ -279,6 +281,7 @@ void		bfad_drv_uninit(struct bfad_s *bfad);
 void		bfad_drv_log_level_set(struct bfad_s *bfad);
 bfa_status_t	bfad_fc4_module_init(void);
 void		bfad_fc4_module_exit(void);
+int		bfad_worker (void *ptr);
 
 void bfad_pci_remove(struct pci_dev *pdev);
 int bfad_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pid);
diff --git a/drivers/scsi/bfa/bfad_im.c b/drivers/scsi/bfa/bfad_im.c
index f788c2a0ab07..f9fc67a25bf2 100644
--- a/drivers/scsi/bfa/bfad_im.c
+++ b/drivers/scsi/bfa/bfad_im.c
@@ -43,11 +43,11 @@ bfa_cb_ioim_done(void *drv, struct bfad_ioim_s *dio,
 	struct bfad_s         *bfad = drv;
 	struct bfad_itnim_data_s *itnim_data;
 	struct bfad_itnim_s *itnim;
+	u8         host_status = DID_OK;
 
 	switch (io_status) {
 	case BFI_IOIM_STS_OK:
 		bfa_trc(bfad, scsi_status);
-		cmnd->result = ScsiResult(DID_OK, scsi_status);
 		scsi_set_resid(cmnd, 0);
 
 		if (sns_len > 0) {
@@ -56,8 +56,18 @@ bfa_cb_ioim_done(void *drv, struct bfad_ioim_s *dio,
 				sns_len = SCSI_SENSE_BUFFERSIZE;
 			memcpy(cmnd->sense_buffer, sns_info, sns_len);
 		}
-		if (residue > 0)
+		if (residue > 0) {
+			bfa_trc(bfad, residue);
 			scsi_set_resid(cmnd, residue);
+			if (!sns_len && (scsi_status == SAM_STAT_GOOD) &&
+				(scsi_bufflen(cmnd) - residue) <
+					cmnd->underflow) {
+				bfa_trc(bfad, 0);
+				host_status = DID_ERROR;
+			}
+		}
+		cmnd->result = ScsiResult(host_status, scsi_status);
+
 		break;
 
 	case BFI_IOIM_STS_ABORTED:
@@ -167,17 +177,15 @@ bfad_im_info(struct Scsi_Host *shost)
 	static char     bfa_buf[256];
 	struct bfad_im_port_s *im_port =
 			(struct bfad_im_port_s *) shost->hostdata[0];
-	struct bfa_ioc_attr_s  ioc_attr;
 	struct bfad_s         *bfad = im_port->bfad;
+	char model[BFA_ADAPTER_MODEL_NAME_LEN];
 
-	memset(&ioc_attr, 0, sizeof(ioc_attr));
-	bfa_get_attr(&bfad->bfa, &ioc_attr);
+	bfa_get_adapter_model(&bfad->bfa, model);
 
 	memset(bfa_buf, 0, sizeof(bfa_buf));
 	snprintf(bfa_buf, sizeof(bfa_buf),
-		 "Brocade FC/FCOE Adapter, " "model: %s hwpath: %s driver: %s",
-		 ioc_attr.adapter_attr.model, bfad->pci_name,
-		 BFAD_DRIVER_VERSION);
+		"Brocade FC/FCOE Adapter, " "model: %s hwpath: %s driver: %s",
+		model, bfad->pci_name, BFAD_DRIVER_VERSION);
 	return bfa_buf;
 }
 
@@ -501,16 +509,6 @@ void bfa_fcb_itnim_tov(struct bfad_itnim_s *itnim)
 }
 
 /**
- * Path TOV processing begin notification -- dummy for linux
- */
-void
-bfa_fcb_itnim_tov_begin(struct bfad_itnim_s *itnim)
-{
-}
-
-
-
-/**
  * Allocate a Scsi_Host for a port.
  */
 int
@@ -931,10 +929,9 @@ bfad_os_fc_host_init(struct bfad_im_port_s *im_port)
 	struct Scsi_Host *host = im_port->shost;
 	struct bfad_s         *bfad = im_port->bfad;
 	struct bfad_port_s    *port = im_port->port;
-	union attr {
-		struct bfa_pport_attr_s pattr;
-		struct bfa_ioc_attr_s  ioc_attr;
-	} attr;
+	struct bfa_pport_attr_s pattr;
+	char model[BFA_ADAPTER_MODEL_NAME_LEN];
+	char fw_ver[BFA_VERSION_LEN];
 
 	fc_host_node_name(host) =
 		bfa_os_htonll((bfa_fcs_port_get_nwwn(port->fcs_port)));
@@ -954,20 +951,18 @@ bfad_os_fc_host_init(struct bfad_im_port_s *im_port)
 	/* For fibre channel services type 0x20 */
 	fc_host_supported_fc4s(host)[7] = 1;
 
-	memset(&attr.ioc_attr, 0, sizeof(attr.ioc_attr));
-	bfa_get_attr(&bfad->bfa, &attr.ioc_attr);
+	bfa_get_adapter_model(&bfad->bfa, model);
+	bfa_get_adapter_fw_ver(&bfad->bfa, fw_ver);
 	sprintf(fc_host_symbolic_name(host), "Brocade %s FV%s DV%s",
-		attr.ioc_attr.adapter_attr.model,
-		attr.ioc_attr.adapter_attr.fw_ver, BFAD_DRIVER_VERSION);
+		model, fw_ver, BFAD_DRIVER_VERSION);
 
 	fc_host_supported_speeds(host) = 0;
 	fc_host_supported_speeds(host) |=
 		FC_PORTSPEED_8GBIT | FC_PORTSPEED_4GBIT | FC_PORTSPEED_2GBIT |
 		FC_PORTSPEED_1GBIT;
 
-	memset(&attr.pattr, 0, sizeof(attr.pattr));
-	bfa_pport_get_attr(&bfad->bfa, &attr.pattr);
-	fc_host_maxframe_size(host) = attr.pattr.pport_cfg.maxfrsize;
+	bfa_fcport_get_attr(&bfad->bfa, &pattr);
+	fc_host_maxframe_size(host) = pattr.pport_cfg.maxfrsize;
 }
 
 static void
diff --git a/drivers/scsi/bfa/bfad_im.h b/drivers/scsi/bfa/bfad_im.h
index 189a5b29e21a..85ab2da21321 100644
--- a/drivers/scsi/bfa/bfad_im.h
+++ b/drivers/scsi/bfa/bfad_im.h
@@ -23,7 +23,6 @@
 
 #define FCPI_NAME " fcpim"
 
-void bfad_flags_set(struct bfad_s *bfad, u32 flags);
 bfa_status_t bfad_im_module_init(void);
 void bfad_im_module_exit(void);
 bfa_status_t bfad_im_probe(struct bfad_s *bfad);
@@ -126,7 +125,6 @@ bfa_status_t bfad_os_thread_workq(struct bfad_s *bfad);
 void bfad_os_destroy_workq(struct bfad_im_s *im);
 void bfad_os_itnim_process(struct bfad_itnim_s *itnim_drv);
 void bfad_os_fc_host_init(struct bfad_im_port_s *im_port);
-void bfad_os_init_work(struct bfad_im_port_s *im_port);
 void bfad_os_scsi_host_free(struct bfad_s *bfad,
 				 struct bfad_im_port_s *im_port);
 void bfad_os_ramp_up_qdepth(struct bfad_itnim_s *itnim,
@@ -136,9 +134,6 @@ struct bfad_itnim_s *bfad_os_get_itnim(struct bfad_im_port_s *im_port, int id);
 int bfad_os_scsi_add_host(struct Scsi_Host *shost,
 		struct bfad_im_port_s *im_port, struct bfad_s *bfad);
 
-/*
- * scsi_host_template entries
- */
 void bfad_im_itnim_unmap(struct bfad_im_port_s  *im_port,
 			 struct bfad_itnim_s *itnim);
 
diff --git a/drivers/scsi/bfa/bfad_intr.c b/drivers/scsi/bfa/bfad_intr.c
index 7de8832f6fee..2b7dbecbebca 100644
--- a/drivers/scsi/bfa/bfad_intr.c
+++ b/drivers/scsi/bfa/bfad_intr.c
@@ -23,8 +23,10 @@ BFA_TRC_FILE(LDRV, INTR);
 /**
  *  bfa_isr BFA driver interrupt functions
  */
-static int msix_disable;
-module_param(msix_disable, int, S_IRUGO | S_IWUSR);
+static int msix_disable_cb;
+static int msix_disable_ct;
+module_param(msix_disable_cb, int, S_IRUGO | S_IWUSR);
+module_param(msix_disable_ct, int, S_IRUGO | S_IWUSR);
 /**
  * Line based interrupt handler.
  */
@@ -141,6 +143,7 @@ bfad_setup_intr(struct bfad_s *bfad)
 	int error = 0;
 	u32 mask = 0, i, num_bit = 0, max_bit = 0;
 	struct msix_entry msix_entries[MAX_MSIX_ENTRY];
+	struct pci_dev *pdev = bfad->pcidev;
 
 	/* Call BFA to get the msix map for this PCI function.  */
 	bfa_msix_getvecs(&bfad->bfa, &mask, &num_bit, &max_bit);
@@ -148,7 +151,9 @@ bfad_setup_intr(struct bfad_s *bfad)
 	/* Set up the msix entry table */
 	bfad_init_msix_entry(bfad, msix_entries, mask, max_bit);
 
-	if (!msix_disable) {
+	if ((pdev->device == BFA_PCI_DEVICE_ID_CT && !msix_disable_ct) ||
+	    (pdev->device != BFA_PCI_DEVICE_ID_CT && !msix_disable_cb)) {
+
 		error = pci_enable_msix(bfad->pcidev, msix_entries, bfad->nvec);
 		if (error) {
 			/*
diff --git a/drivers/scsi/bfa/fabric.c b/drivers/scsi/bfa/fabric.c
index a4b5dd449573..8166e9745ec0 100644
--- a/drivers/scsi/bfa/fabric.c
+++ b/drivers/scsi/bfa/fabric.c
@@ -37,7 +37,7 @@ BFA_TRC_FILE(FCS, FABRIC);
 #define BFA_FCS_FABRIC_CLEANUP_DELAY	(10000)	/* Milliseconds */
 
 #define bfa_fcs_fabric_set_opertype(__fabric) do {             \
-	if (bfa_pport_get_topology((__fabric)->fcs->bfa)       \
+	if (bfa_fcport_get_topology((__fabric)->fcs->bfa)       \
 				== BFA_PPORT_TOPOLOGY_P2P)     \
 		(__fabric)->oper_type = BFA_PPORT_TYPE_NPORT;  \
 	else                                                   \
@@ -136,8 +136,7 @@ bfa_fcs_fabric_sm_uninit(struct bfa_fcs_fabric_s *fabric,
 	case BFA_FCS_FABRIC_SM_CREATE:
 		bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_created);
 		bfa_fcs_fabric_init(fabric);
-		bfa_fcs_lport_init(&fabric->bport, fabric->fcs, FC_VF_ID_NULL,
-				   &fabric->bport.port_cfg, NULL);
+		bfa_fcs_lport_init(&fabric->bport, &fabric->bport.port_cfg);
 		break;
 
 	case BFA_FCS_FABRIC_SM_LINK_UP:
@@ -161,7 +160,7 @@ bfa_fcs_fabric_sm_created(struct bfa_fcs_fabric_s *fabric,
 
 	switch (event) {
 	case BFA_FCS_FABRIC_SM_START:
-		if (bfa_pport_is_linkup(fabric->fcs->bfa)) {
+		if (bfa_fcport_is_linkup(fabric->fcs->bfa)) {
 			bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_flogi);
 			bfa_fcs_fabric_login(fabric);
 		} else
@@ -225,7 +224,7 @@ bfa_fcs_fabric_sm_flogi(struct bfa_fcs_fabric_s *fabric,
 	switch (event) {
 	case BFA_FCS_FABRIC_SM_CONT_OP:
 
-		bfa_pport_set_tx_bbcredit(fabric->fcs->bfa, fabric->bb_credit);
+		bfa_fcport_set_tx_bbcredit(fabric->fcs->bfa, fabric->bb_credit);
 		fabric->fab_type = BFA_FCS_FABRIC_SWITCHED;
 
 		if (fabric->auth_reqd && fabric->is_auth) {
@@ -252,7 +251,7 @@ bfa_fcs_fabric_sm_flogi(struct bfa_fcs_fabric_s *fabric,
 
 	case BFA_FCS_FABRIC_SM_NO_FABRIC:
 		fabric->fab_type = BFA_FCS_FABRIC_N2N;
-		bfa_pport_set_tx_bbcredit(fabric->fcs->bfa, fabric->bb_credit);
+		bfa_fcport_set_tx_bbcredit(fabric->fcs->bfa, fabric->bb_credit);
 		bfa_fcs_fabric_notify_online(fabric);
 		bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_nofabric);
 		break;
@@ -419,7 +418,7 @@ bfa_fcs_fabric_sm_nofabric(struct bfa_fcs_fabric_s *fabric,
 
 	case BFA_FCS_FABRIC_SM_NO_FABRIC:
 		bfa_trc(fabric->fcs, fabric->bb_credit);
-		bfa_pport_set_tx_bbcredit(fabric->fcs->bfa, fabric->bb_credit);
+		bfa_fcport_set_tx_bbcredit(fabric->fcs->bfa, fabric->bb_credit);
 		break;
 
 	default:
@@ -563,17 +562,15 @@ void
 bfa_fcs_fabric_psymb_init(struct bfa_fcs_fabric_s *fabric)
 {
 	struct bfa_port_cfg_s *port_cfg = &fabric->bport.port_cfg;
-	struct bfa_adapter_attr_s adapter_attr;
+	char            model[BFA_ADAPTER_MODEL_NAME_LEN] = {0};
 	struct bfa_fcs_driver_info_s *driver_info = &fabric->fcs->driver_info;
 
-	bfa_os_memset((void *)&adapter_attr, 0,
-		      sizeof(struct bfa_adapter_attr_s));
-	bfa_ioc_get_adapter_attr(&fabric->fcs->bfa->ioc, &adapter_attr);
+	bfa_ioc_get_adapter_model(&fabric->fcs->bfa->ioc, model);
 
 	/*
 	 * Model name/number
 	 */
-	strncpy((char *)&port_cfg->sym_name, adapter_attr.model,
+	strncpy((char *)&port_cfg->sym_name, model,
 		BFA_FCS_PORT_SYMBNAME_MODEL_SZ);
 	strncat((char *)&port_cfg->sym_name, BFA_FCS_PORT_SYMBNAME_SEPARATOR,
 		sizeof(BFA_FCS_PORT_SYMBNAME_SEPARATOR));
@@ -719,10 +716,10 @@ bfa_fcs_fabric_login(struct bfa_fcs_fabric_s *fabric)
 	struct bfa_port_cfg_s *pcfg = &fabric->bport.port_cfg;
 	u8         alpa = 0;
 
-	if (bfa_pport_get_topology(bfa) == BFA_PPORT_TOPOLOGY_LOOP)
-		alpa = bfa_pport_get_myalpa(bfa);
+	if (bfa_fcport_get_topology(bfa) == BFA_PPORT_TOPOLOGY_LOOP)
+		alpa = bfa_fcport_get_myalpa(bfa);
 
-	bfa_lps_flogi(fabric->lps, fabric, alpa, bfa_pport_get_maxfrsize(bfa),
+	bfa_lps_flogi(fabric->lps, fabric, alpa, bfa_fcport_get_maxfrsize(bfa),
 		      pcfg->pwwn, pcfg->nwwn, fabric->auth_reqd);
 
 	fabric->stats.flogi_sent++;
@@ -814,10 +811,10 @@ bfa_fcs_fabric_delete_comp(void *cbarg)
  */
 
 /**
- *   Module initialization
+ *   Attach time initialization
  */
 void
-bfa_fcs_fabric_modinit(struct bfa_fcs_s *fcs)
+bfa_fcs_fabric_attach(struct bfa_fcs_s *fcs)
 {
 	struct bfa_fcs_fabric_s *fabric;
 
@@ -841,7 +838,13 @@ bfa_fcs_fabric_modinit(struct bfa_fcs_s *fcs)
 	bfa_wc_up(&fabric->wc);	/* For the base port */
 
 	bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_uninit);
-	bfa_sm_send_event(fabric, BFA_FCS_FABRIC_SM_CREATE);
+	bfa_fcs_lport_attach(&fabric->bport, fabric->fcs, FC_VF_ID_NULL, NULL);
+}
+
+void
+bfa_fcs_fabric_modinit(struct bfa_fcs_s *fcs)
+{
+	bfa_sm_send_event(&fcs->fabric, BFA_FCS_FABRIC_SM_CREATE);
 	bfa_trc(fcs, 0);
 }
 
@@ -890,6 +893,12 @@ bfa_fcs_fabric_is_loopback(struct bfa_fcs_fabric_s *fabric)
 	return bfa_sm_cmp_state(fabric, bfa_fcs_fabric_sm_loopback);
 }
 
+bfa_boolean_t
+bfa_fcs_fabric_is_auth_failed(struct bfa_fcs_fabric_s *fabric)
+{
+	return bfa_sm_cmp_state(fabric, bfa_fcs_fabric_sm_auth_failed);
+}
+
 enum bfa_pport_type
 bfa_fcs_fabric_port_type(struct bfa_fcs_fabric_s *fabric)
 {
@@ -1165,8 +1174,8 @@ bfa_fcs_fabric_send_flogi_acc(struct bfa_fcs_fabric_s *fabric)
 	reqlen = fc_flogi_acc_build(&fchs, bfa_fcxp_get_reqbuf(fcxp),
 				    bfa_os_hton3b(FC_FABRIC_PORT),
 				    n2n_port->reply_oxid, pcfg->pwwn,
-				    pcfg->nwwn, bfa_pport_get_maxfrsize(bfa),
-				    bfa_pport_get_rx_bbcredit(bfa));
+				    pcfg->nwwn, bfa_fcport_get_maxfrsize(bfa),
+				    bfa_fcport_get_rx_bbcredit(bfa));
 
 	bfa_fcxp_send(fcxp, NULL, fabric->vf_id, bfa_lps_get_tag(fabric->lps),
 			BFA_FALSE, FC_CLASS_3, reqlen, &fchs,
@@ -1224,14 +1233,8 @@ bfa_fcs_fabric_aen_post(struct bfa_fcs_port_s *port,
 	wwn2str(pwwn_ptr, pwwn);
 	wwn2str(fwwn_ptr, fwwn);
 
-	switch (event) {
-	case BFA_PORT_AEN_FABRIC_NAME_CHANGE:
-		bfa_log(logmod, BFA_AEN_PORT_FABRIC_NAME_CHANGE, pwwn_ptr,
-			fwwn_ptr);
-		break;
-	default:
-		break;
-	}
+	bfa_log(logmod, BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, event),
+		pwwn_ptr, fwwn_ptr);
 
 	aen_data.port.pwwn = pwwn;
 	aen_data.port.fwwn = fwwn;
diff --git a/drivers/scsi/bfa/fcbuild.h b/drivers/scsi/bfa/fcbuild.h
index 8fa7f270ef7b..981d98d542b9 100644
--- a/drivers/scsi/bfa/fcbuild.h
+++ b/drivers/scsi/bfa/fcbuild.h
@@ -72,6 +72,9 @@ fc_rpsc_operspeed_to_bfa_speed(enum fc_rpsc_op_speed_s speed)
 	case RPSC_OP_SPEED_8G:
 		return BFA_PPORT_SPEED_8GBPS;
 
+	case RPSC_OP_SPEED_10G:
+		return BFA_PPORT_SPEED_10GBPS;
+
 	default:
 		return BFA_PPORT_SPEED_UNKNOWN;
 	}
@@ -97,6 +100,9 @@ fc_bfa_speed_to_rpsc_operspeed(enum bfa_pport_speed op_speed)
 	case BFA_PPORT_SPEED_8GBPS:
 		return RPSC_OP_SPEED_8G;
 
+	case BFA_PPORT_SPEED_10GBPS:
+		return RPSC_OP_SPEED_10G;
+
 	default:
 		return RPSC_OP_SPEED_NOT_EST;
 	}
diff --git a/drivers/scsi/bfa/fcpim.c b/drivers/scsi/bfa/fcpim.c
index 1f3c06efaa9e..8ae4a2cfa85b 100644
--- a/drivers/scsi/bfa/fcpim.c
+++ b/drivers/scsi/bfa/fcpim.c
@@ -126,7 +126,7 @@ bfa_fcs_itnim_sm_offline(struct bfa_fcs_itnim_s *itnim,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(itnim->fcs, event);
 	}
 
 }
@@ -161,7 +161,7 @@ bfa_fcs_itnim_sm_prli_send(struct bfa_fcs_itnim_s *itnim,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(itnim->fcs, event);
 	}
 }
 
@@ -205,7 +205,7 @@ bfa_fcs_itnim_sm_prli(struct bfa_fcs_itnim_s *itnim,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(itnim->fcs, event);
 	}
 }
 
@@ -240,7 +240,7 @@ bfa_fcs_itnim_sm_prli_retry(struct bfa_fcs_itnim_s *itnim,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(itnim->fcs, event);
 	}
 }
 
@@ -270,7 +270,7 @@ bfa_fcs_itnim_sm_hcb_online(struct bfa_fcs_itnim_s *itnim,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(itnim->fcs, event);
 	}
 }
 
@@ -298,7 +298,7 @@ bfa_fcs_itnim_sm_online(struct bfa_fcs_itnim_s *itnim,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(itnim->fcs, event);
 	}
 }
 
@@ -321,7 +321,7 @@ bfa_fcs_itnim_sm_hcb_offline(struct bfa_fcs_itnim_s *itnim,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(itnim->fcs, event);
 	}
 }
 
@@ -354,7 +354,7 @@ bfa_fcs_itnim_sm_initiator(struct bfa_fcs_itnim_s *itnim,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(itnim->fcs, event);
 	}
 }
 
@@ -385,19 +385,8 @@ bfa_fcs_itnim_aen_post(struct bfa_fcs_itnim_s *itnim,
 	wwn2str(lpwwn_ptr, lpwwn);
 	wwn2str(rpwwn_ptr, rpwwn);
 
-	switch (event) {
-	case BFA_ITNIM_AEN_ONLINE:
-		bfa_log(logmod, BFA_AEN_ITNIM_ONLINE, rpwwn_ptr, lpwwn_ptr);
-		break;
-	case BFA_ITNIM_AEN_OFFLINE:
-		bfa_log(logmod, BFA_AEN_ITNIM_OFFLINE, rpwwn_ptr, lpwwn_ptr);
-		break;
-	case BFA_ITNIM_AEN_DISCONNECT:
-		bfa_log(logmod, BFA_AEN_ITNIM_DISCONNECT, rpwwn_ptr, lpwwn_ptr);
-		break;
-	default:
-		break;
-	}
+	bfa_log(logmod, BFA_LOG_CREATE_ID(BFA_AEN_CAT_ITNIM, event),
+		rpwwn_ptr, lpwwn_ptr);
 
 	aen_data.itnim.vf_id = rport->port->fabric->vf_id;
 	aen_data.itnim.ppwwn =
@@ -689,7 +678,6 @@ bfa_cb_itnim_tov_begin(void *cb_arg)
 	struct bfa_fcs_itnim_s *itnim = (struct bfa_fcs_itnim_s *)cb_arg;
 
 	bfa_trc(itnim->fcs, itnim->rport->pwwn);
-	bfa_fcb_itnim_tov_begin(itnim->itnim_drv);
 }
 
 /**
@@ -822,22 +810,3 @@ void
 bfa_fcs_itnim_resume(struct bfa_fcs_itnim_s *itnim)
 {
 }
-
-/**
- *   Module initialization
- */
-void
-bfa_fcs_fcpim_modinit(struct bfa_fcs_s *fcs)
-{
-}
-
-/**
- *   Module cleanup
- */
-void
-bfa_fcs_fcpim_modexit(struct bfa_fcs_s *fcs)
-{
-	bfa_fcs_modexit_comp(fcs);
-}
-
-
diff --git a/drivers/scsi/bfa/fcs_fabric.h b/drivers/scsi/bfa/fcs_fabric.h
index eee960820f86..244c3f00c50c 100644
--- a/drivers/scsi/bfa/fcs_fabric.h
+++ b/drivers/scsi/bfa/fcs_fabric.h
@@ -29,6 +29,7 @@
 /*
 * fcs friend functions: only between fcs modules
  */
+void		bfa_fcs_fabric_attach(struct bfa_fcs_s *fcs);
 void            bfa_fcs_fabric_modinit(struct bfa_fcs_s *fcs);
 void            bfa_fcs_fabric_modexit(struct bfa_fcs_s *fcs);
 void            bfa_fcs_fabric_modsusp(struct bfa_fcs_s *fcs);
@@ -46,6 +47,7 @@ void            bfa_fcs_fabric_uf_recv(struct bfa_fcs_fabric_s *fabric,
 			struct fchs_s *fchs, u16 len);
 u16        bfa_fcs_fabric_vport_count(struct bfa_fcs_fabric_s *fabric);
 bfa_boolean_t   bfa_fcs_fabric_is_loopback(struct bfa_fcs_fabric_s *fabric);
+bfa_boolean_t	bfa_fcs_fabric_is_auth_failed(struct bfa_fcs_fabric_s *fabric);
 enum bfa_pport_type bfa_fcs_fabric_port_type(struct bfa_fcs_fabric_s *fabric);
 void     	bfa_fcs_fabric_psymb_init(struct bfa_fcs_fabric_s *fabric);
 void bfa_fcs_fabric_port_delete_comp(struct bfa_fcs_fabric_s *fabric);
diff --git a/drivers/scsi/bfa/fcs_fcpim.h b/drivers/scsi/bfa/fcs_fcpim.h
index 61e9e2687de3..11e6e7bce9f6 100644
--- a/drivers/scsi/bfa/fcs_fcpim.h
+++ b/drivers/scsi/bfa/fcs_fcpim.h
@@ -34,11 +34,6 @@ void bfa_fcs_itnim_is_initiator(struct bfa_fcs_itnim_s *itnim);
 void bfa_fcs_itnim_pause(struct bfa_fcs_itnim_s *itnim);
 void bfa_fcs_itnim_resume(struct bfa_fcs_itnim_s *itnim);
 
-/*
- * Modudle init/cleanup routines.
- */
-void bfa_fcs_fcpim_modinit(struct bfa_fcs_s *fcs);
-void bfa_fcs_fcpim_modexit(struct bfa_fcs_s *fcs);
 void bfa_fcs_fcpim_uf_recv(struct bfa_fcs_itnim_s *itnim, struct fchs_s *fchs,
 			u16 len);
 #endif /* __FCS_FCPIM_H__ */
diff --git a/drivers/scsi/bfa/fcs_lport.h b/drivers/scsi/bfa/fcs_lport.h
index ae744ba35671..a6508c8ab184 100644
--- a/drivers/scsi/bfa/fcs_lport.h
+++ b/drivers/scsi/bfa/fcs_lport.h
@@ -84,9 +84,10 @@ void bfa_fcs_port_uf_recv(struct bfa_fcs_port_s *lport, struct fchs_s *fchs,
  * Following routines will be called by Fabric to indicate port
  * online/offline to vport.
  */
-void bfa_fcs_lport_init(struct bfa_fcs_port_s *lport, struct bfa_fcs_s *fcs,
-			u16 vf_id, struct bfa_port_cfg_s *port_cfg,
-			struct bfa_fcs_vport_s *vport);
+void bfa_fcs_lport_attach(struct bfa_fcs_port_s *lport, struct bfa_fcs_s *fcs,
+			uint16_t vf_id, struct bfa_fcs_vport_s *vport);
+void bfa_fcs_lport_init(struct bfa_fcs_port_s *lport,
+			struct bfa_port_cfg_s *port_cfg);
 void bfa_fcs_port_online(struct bfa_fcs_port_s *port);
 void bfa_fcs_port_offline(struct bfa_fcs_port_s *port);
 void bfa_fcs_port_delete(struct bfa_fcs_port_s *port);
diff --git a/drivers/scsi/bfa/fcs_port.h b/drivers/scsi/bfa/fcs_port.h
index abb65191dd27..408c06a7d164 100644
--- a/drivers/scsi/bfa/fcs_port.h
+++ b/drivers/scsi/bfa/fcs_port.h
@@ -26,7 +26,6 @@
 /*
  * fcs friend functions: only between fcs modules
  */
-void bfa_fcs_pport_modinit(struct bfa_fcs_s *fcs);
-void bfa_fcs_pport_modexit(struct bfa_fcs_s *fcs);
+void bfa_fcs_pport_attach(struct bfa_fcs_s *fcs);
 
 #endif /* __FCS_PPORT_H__ */
diff --git a/drivers/scsi/bfa/fcs_rport.h b/drivers/scsi/bfa/fcs_rport.h
index f601e9d74236..9c8d1d292380 100644
--- a/drivers/scsi/bfa/fcs_rport.h
+++ b/drivers/scsi/bfa/fcs_rport.h
@@ -24,9 +24,6 @@
 
 #include <fcs/bfa_fcs_rport.h>
 
-void bfa_fcs_rport_modinit(struct bfa_fcs_s *fcs);
-void bfa_fcs_rport_modexit(struct bfa_fcs_s *fcs);
-
 void bfa_fcs_rport_uf_recv(struct bfa_fcs_rport_s *rport, struct fchs_s *fchs,
 			u16 len);
 void bfa_fcs_rport_scn(struct bfa_fcs_rport_s *rport);
diff --git a/drivers/scsi/bfa/fcs_uf.h b/drivers/scsi/bfa/fcs_uf.h
index 96f1bdcb31ed..f591072214fe 100644
--- a/drivers/scsi/bfa/fcs_uf.h
+++ b/drivers/scsi/bfa/fcs_uf.h
@@ -26,7 +26,6 @@
 /*
  * fcs friend functions: only between fcs modules
  */
-void bfa_fcs_uf_modinit(struct bfa_fcs_s *fcs);
-void bfa_fcs_uf_modexit(struct bfa_fcs_s *fcs);
+void bfa_fcs_uf_attach(struct bfa_fcs_s *fcs);
 
 #endif /* __FCS_UF_H__ */
diff --git a/drivers/scsi/bfa/fcs_vport.h b/drivers/scsi/bfa/fcs_vport.h
index 9e80b6a97b7f..13c32ebf946c 100644
--- a/drivers/scsi/bfa/fcs_vport.h
+++ b/drivers/scsi/bfa/fcs_vport.h
@@ -22,18 +22,10 @@
 #include <fcs/bfa_fcs_vport.h>
 #include <defs/bfa_defs_pci.h>
 
-/*
- * Modudle init/cleanup routines.
- */
-
-void bfa_fcs_vport_modinit(struct bfa_fcs_s *fcs);
-void bfa_fcs_vport_modexit(struct bfa_fcs_s *fcs);
-
 void bfa_fcs_vport_cleanup(struct bfa_fcs_vport_s *vport);
 void bfa_fcs_vport_online(struct bfa_fcs_vport_s *vport);
 void bfa_fcs_vport_offline(struct bfa_fcs_vport_s *vport);
 void bfa_fcs_vport_delete_comp(struct bfa_fcs_vport_s *vport);
-u32 bfa_fcs_vport_get_max(struct bfa_fcs_s *fcs);
 
 #endif /* __FCS_VPORT_H__ */
 
diff --git a/drivers/scsi/bfa/fdmi.c b/drivers/scsi/bfa/fdmi.c
index df2a1e54e16b..8f17076d1a87 100644
--- a/drivers/scsi/bfa/fdmi.c
+++ b/drivers/scsi/bfa/fdmi.c
@@ -116,6 +116,9 @@ static void     bfa_fcs_port_fdmi_sm_rpa_retry(struct bfa_fcs_port_fdmi_s *fdmi,
 			enum port_fdmi_event event);
 static void     bfa_fcs_port_fdmi_sm_online(struct bfa_fcs_port_fdmi_s *fdmi,
 			enum port_fdmi_event event);
+static void	bfa_fcs_port_fdmi_sm_disabled(struct bfa_fcs_port_fdmi_s *fdmi,
+			enum port_fdmi_event event);
+
 /**
  * 		Start in offline state - awaiting MS to send start.
  */
@@ -155,7 +158,7 @@ bfa_fcs_port_fdmi_sm_offline(struct bfa_fcs_port_fdmi_s *fdmi,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(port->fcs, event);
 	}
 }
 
@@ -180,7 +183,7 @@ bfa_fcs_port_fdmi_sm_sending_rhba(struct bfa_fcs_port_fdmi_s *fdmi,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(port->fcs, event);
 	}
 }
 
@@ -227,7 +230,7 @@ bfa_fcs_port_fdmi_sm_rhba(struct bfa_fcs_port_fdmi_s *fdmi,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(port->fcs, event);
 	}
 }
 
@@ -255,7 +258,7 @@ bfa_fcs_port_fdmi_sm_rhba_retry(struct bfa_fcs_port_fdmi_s *fdmi,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(port->fcs, event);
 	}
 }
 
@@ -283,7 +286,7 @@ bfa_fcs_port_fdmi_sm_sending_rprt(struct bfa_fcs_port_fdmi_s *fdmi,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(port->fcs, event);
 	}
 }
 
@@ -328,7 +331,7 @@ bfa_fcs_port_fdmi_sm_rprt(struct bfa_fcs_port_fdmi_s *fdmi,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(port->fcs, event);
 	}
 }
 
@@ -356,7 +359,7 @@ bfa_fcs_port_fdmi_sm_rprt_retry(struct bfa_fcs_port_fdmi_s *fdmi,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(port->fcs, event);
 	}
 }
 
@@ -384,7 +387,7 @@ bfa_fcs_port_fdmi_sm_sending_rpa(struct bfa_fcs_port_fdmi_s *fdmi,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(port->fcs, event);
 	}
 }
 
@@ -428,7 +431,7 @@ bfa_fcs_port_fdmi_sm_rpa(struct bfa_fcs_port_fdmi_s *fdmi,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(port->fcs, event);
 	}
 }
 
@@ -456,7 +459,7 @@ bfa_fcs_port_fdmi_sm_rpa_retry(struct bfa_fcs_port_fdmi_s *fdmi,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(port->fcs, event);
 	}
 }
 
@@ -475,10 +478,24 @@ bfa_fcs_port_fdmi_sm_online(struct bfa_fcs_port_fdmi_s *fdmi,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(port->fcs, event);
 	}
 }
 
+/**
+ *  FDMI is disabled state.
+ */
+static void
+bfa_fcs_port_fdmi_sm_disabled(struct bfa_fcs_port_fdmi_s *fdmi,
+				enum port_fdmi_event event)
+{
+	struct bfa_fcs_port_s *port = fdmi->ms->port;
+
+	bfa_trc(port->fcs, port->port_cfg.pwwn);
+	bfa_trc(port->fcs, event);
+
+	/* No op State. It can only be enabled at Driver Init. */
+}
 
 /**
 *   RHBA : Register HBA Attributes.
@@ -1097,36 +1114,23 @@ bfa_fcs_fdmi_get_hbaattr(struct bfa_fcs_port_fdmi_s *fdmi,
 {
 	struct bfa_fcs_port_s *port = fdmi->ms->port;
 	struct bfa_fcs_driver_info_s *driver_info = &port->fcs->driver_info;
-	struct bfa_adapter_attr_s adapter_attr;
 
 	bfa_os_memset(hba_attr, 0, sizeof(struct bfa_fcs_fdmi_hba_attr_s));
-	bfa_os_memset(&adapter_attr, 0, sizeof(struct bfa_adapter_attr_s));
-
-	bfa_ioc_get_adapter_attr(&port->fcs->bfa->ioc, &adapter_attr);
-
-	strncpy(hba_attr->manufacturer, adapter_attr.manufacturer,
-		sizeof(adapter_attr.manufacturer));
-
-	strncpy(hba_attr->serial_num, adapter_attr.serial_num,
-		sizeof(adapter_attr.serial_num));
 
-	strncpy(hba_attr->model, adapter_attr.model, sizeof(hba_attr->model));
-
-	strncpy(hba_attr->model_desc, adapter_attr.model_descr,
-		sizeof(hba_attr->model_desc));
-
-	strncpy(hba_attr->hw_version, adapter_attr.hw_ver,
-		sizeof(hba_attr->hw_version));
+	bfa_ioc_get_adapter_manufacturer(&port->fcs->bfa->ioc,
+		hba_attr->manufacturer);
+	bfa_ioc_get_adapter_serial_num(&port->fcs->bfa->ioc,
+						hba_attr->serial_num);
+	bfa_ioc_get_adapter_model(&port->fcs->bfa->ioc, hba_attr->model);
+	bfa_ioc_get_adapter_model(&port->fcs->bfa->ioc, hba_attr->model_desc);
+	bfa_ioc_get_pci_chip_rev(&port->fcs->bfa->ioc, hba_attr->hw_version);
+	bfa_ioc_get_adapter_optrom_ver(&port->fcs->bfa->ioc,
+		hba_attr->option_rom_ver);
+	bfa_ioc_get_adapter_fw_ver(&port->fcs->bfa->ioc, hba_attr->fw_version);
 
 	strncpy(hba_attr->driver_version, (char *)driver_info->version,
 		sizeof(hba_attr->driver_version));
 
-	strncpy(hba_attr->option_rom_ver, adapter_attr.optrom_ver,
-		sizeof(hba_attr->option_rom_ver));
-
-	strncpy(hba_attr->fw_version, adapter_attr.fw_ver,
-		sizeof(hba_attr->fw_version));
-
 	strncpy(hba_attr->os_name, driver_info->host_os_name,
 		sizeof(hba_attr->os_name));
 
@@ -1158,7 +1162,7 @@ bfa_fcs_fdmi_get_portattr(struct bfa_fcs_port_fdmi_s *fdmi,
 	/*
 	 * get pport attributes from hal
 	 */
-	bfa_pport_get_attr(port->fcs->bfa, &pport_attr);
+	bfa_fcport_get_attr(port->fcs->bfa, &pport_attr);
 
 	/*
 	 * get FC4 type Bitmask
@@ -1201,7 +1205,10 @@ bfa_fcs_port_fdmi_init(struct bfa_fcs_port_ms_s *ms)
 	struct bfa_fcs_port_fdmi_s *fdmi = &ms->fdmi;
 
 	fdmi->ms = ms;
-	bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_offline);
+	if (ms->port->fcs->fdmi_enabled)
+		bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_offline);
+	else
+		bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_disabled);
 }
 
 void
diff --git a/drivers/scsi/bfa/include/aen/bfa_aen.h b/drivers/scsi/bfa/include/aen/bfa_aen.h
index d9cbc2a783d4..6abbab005db6 100644
--- a/drivers/scsi/bfa/include/aen/bfa_aen.h
+++ b/drivers/scsi/bfa/include/aen/bfa_aen.h
@@ -18,21 +18,24 @@
 #define __BFA_AEN_H__
 
 #include "defs/bfa_defs_aen.h"
+#include "defs/bfa_defs_status.h"
+#include "cs/bfa_debug.h"
 
-#define BFA_AEN_MAX_ENTRY   512
+#define BFA_AEN_MAX_ENTRY	512
 
-extern s32 bfa_aen_max_cfg_entry;
+extern int bfa_aen_max_cfg_entry;
 struct bfa_aen_s {
 	void		*bfad;
-	s32		max_entry;
-	s32		write_index;
-	s32		read_index;
-	u32	bfad_num;
-	u32	seq_num;
+	int		max_entry;
+	int		write_index;
+	int		read_index;
+	int		bfad_num;
+	int		seq_num;
 	void		(*aen_cb_notify)(void *bfad);
 	void		(*gettimeofday)(struct bfa_timeval_s *tv);
-	struct bfa_trc_mod_s 	*trcmod;
-	struct bfa_aen_entry_s	list[BFA_AEN_MAX_ENTRY]; /* Must be the last */
+	struct bfa_trc_mod_s *trcmod;
+	int		app_ri[BFA_AEN_MAX_APP]; /* For multiclient support */
+	struct bfa_aen_entry_s list[BFA_AEN_MAX_ENTRY]; /* Must be the last */
 };
 
 
@@ -45,48 +48,49 @@ bfa_aen_set_max_cfg_entry(int max_entry)
 	bfa_aen_max_cfg_entry = max_entry;
 }
 
-static inline s32
+static inline int
 bfa_aen_get_max_cfg_entry(void)
 {
 	return bfa_aen_max_cfg_entry;
 }
 
-static inline s32
+static inline int
 bfa_aen_get_meminfo(void)
 {
 	return sizeof(struct bfa_aen_entry_s) * bfa_aen_get_max_cfg_entry();
 }
 
-static inline s32
+static inline int
 bfa_aen_get_wi(struct bfa_aen_s *aen)
 {
 	return aen->write_index;
 }
 
-static inline s32
+static inline int
 bfa_aen_get_ri(struct bfa_aen_s *aen)
 {
 	return aen->read_index;
 }
 
-static inline s32
-bfa_aen_fetch_count(struct bfa_aen_s *aen, s32 read_index)
+static inline int
+bfa_aen_fetch_count(struct bfa_aen_s *aen, enum bfa_aen_app  app_id)
 {
-	return ((aen->write_index + aen->max_entry) - read_index)
+	bfa_assert((app_id < BFA_AEN_MAX_APP) && (app_id >= bfa_aen_app_bcu));
+	return ((aen->write_index + aen->max_entry) - aen->app_ri[app_id])
 		% aen->max_entry;
 }
 
-s32 bfa_aen_init(struct bfa_aen_s *aen, struct bfa_trc_mod_s *trcmod,
-		void *bfad, u32 inst_id, void (*aen_cb_notify)(void *),
+int bfa_aen_init(struct bfa_aen_s *aen, struct bfa_trc_mod_s *trcmod,
+		void *bfad, int bfad_num, void (*aen_cb_notify)(void *),
 		void (*gettimeofday)(struct bfa_timeval_s *));
 
-s32 bfa_aen_post(struct bfa_aen_s *aen, enum bfa_aen_category aen_category,
+void bfa_aen_post(struct bfa_aen_s *aen, enum bfa_aen_category aen_category,
 		     int aen_type, union bfa_aen_data_u *aen_data);
 
-s32 bfa_aen_fetch(struct bfa_aen_s *aen, struct bfa_aen_entry_s *aen_entry,
-		      s32 entry_space, s32 rii, s32 *ri_arr,
-		      s32 ri_arr_cnt);
+bfa_status_t bfa_aen_fetch(struct bfa_aen_s *aen,
+			struct bfa_aen_entry_s *aen_entry,
+			int entry_req, enum bfa_aen_app app_id, int *entry_ret);
 
-s32 bfa_aen_get_inst(struct bfa_aen_s *aen);
+int bfa_aen_get_inst(struct bfa_aen_s *aen);
 
 #endif /* __BFA_AEN_H__ */
diff --git a/drivers/scsi/bfa/include/bfa.h b/drivers/scsi/bfa/include/bfa.h
index d4bc0d9fa42c..1f5966cfbd16 100644
--- a/drivers/scsi/bfa/include/bfa.h
+++ b/drivers/scsi/bfa/include/bfa.h
@@ -106,6 +106,26 @@ struct bfa_sge_s {
 	bfa_ioc_fetch_stats(&(__bfa)->ioc, __ioc_stats)
 #define bfa_ioc_clear_stats(__bfa)	\
 	bfa_ioc_clr_stats(&(__bfa)->ioc)
+#define bfa_get_nports(__bfa)   \
+	bfa_ioc_get_nports(&(__bfa)->ioc)
+#define bfa_get_adapter_manufacturer(__bfa, __manufacturer) \
+	bfa_ioc_get_adapter_manufacturer(&(__bfa)->ioc, __manufacturer)
+#define bfa_get_adapter_model(__bfa, __model)   \
+	bfa_ioc_get_adapter_model(&(__bfa)->ioc, __model)
+#define bfa_get_adapter_serial_num(__bfa, __serial_num) \
+	bfa_ioc_get_adapter_serial_num(&(__bfa)->ioc, __serial_num)
+#define bfa_get_adapter_fw_ver(__bfa, __fw_ver) \
+	bfa_ioc_get_adapter_fw_ver(&(__bfa)->ioc, __fw_ver)
+#define bfa_get_adapter_optrom_ver(__bfa, __optrom_ver) \
+	bfa_ioc_get_adapter_optrom_ver(&(__bfa)->ioc, __optrom_ver)
+#define bfa_get_pci_chip_rev(__bfa, __chip_rev) \
+	bfa_ioc_get_pci_chip_rev(&(__bfa)->ioc, __chip_rev)
+#define bfa_get_ioc_state(__bfa)    \
+	bfa_ioc_get_state(&(__bfa)->ioc)
+#define bfa_get_type(__bfa) \
+	bfa_ioc_get_type(&(__bfa)->ioc)
+#define bfa_get_mac(__bfa)  \
+	bfa_ioc_get_mac(&(__bfa)->ioc)
 
 /*
  * bfa API functions
@@ -161,6 +181,7 @@ bfa_status_t bfa_iocfc_israttr_set(struct bfa_s *bfa,
 void bfa_iocfc_enable(struct bfa_s *bfa);
 void bfa_iocfc_disable(struct bfa_s *bfa);
 void bfa_ioc_auto_recover(bfa_boolean_t auto_recover);
+void bfa_chip_reset(struct bfa_s *bfa);
 void bfa_cb_ioc_disable(void *bfad);
 void bfa_timer_tick(struct bfa_s *bfa);
 #define bfa_timer_start(_bfa, _timer, _timercb, _arg, _timeout)	\
@@ -171,6 +192,7 @@ void bfa_timer_tick(struct bfa_s *bfa);
  */
 bfa_status_t bfa_debug_fwtrc(struct bfa_s *bfa, void *trcdata, int *trclen);
 bfa_status_t bfa_debug_fwsave(struct bfa_s *bfa, void *trcdata, int *trclen);
+void bfa_debug_fwsave_clear(struct bfa_s *bfa);
 
 #include "bfa_priv.h"
 
diff --git a/drivers/scsi/bfa/include/bfa_svc.h b/drivers/scsi/bfa/include/bfa_svc.h
index 268d956bad89..1349b99a3c6d 100644
--- a/drivers/scsi/bfa/include/bfa_svc.h
+++ b/drivers/scsi/bfa/include/bfa_svc.h
@@ -26,6 +26,7 @@ struct bfa_fcxp_s;
 #include <defs/bfa_defs_pport.h>
 #include <defs/bfa_defs_rport.h>
 #include <defs/bfa_defs_qos.h>
+#include <defs/bfa_defs_fcport.h>
 #include <cs/bfa_sm.h>
 #include <bfa.h>
 
@@ -35,7 +36,7 @@ struct bfa_fcxp_s;
 struct bfa_rport_info_s {
 	u16        max_frmsz;	/*  max rcv pdu size               */
 	u32        pid:24,		/*  remote port ID                 */
-			lp_tag:8;
+			lp_tag:8;	/*  tag                     */
 	u32        local_pid:24,	/*  local port ID		    */
 			cisc:8;		/*  CIRO supported		    */
 	u8         fc_class;	/*  supported FC classes. enum fc_cos */
@@ -54,7 +55,7 @@ struct bfa_rport_s {
 	void                  *rport_drv; /*  fcs/driver rport object */
 	u16              fw_handle; /*  firmware rport handle */
 	u16              rport_tag; /*  BFA rport tag */
-	struct bfa_rport_info_s rport_info; /*  rport info from *fcs/driver */
+	struct bfa_rport_info_s rport_info; /*  rport info from fcs/driver */
 	struct bfa_reqq_wait_s reqq_wait; /*  to wait for room in reqq */
 	struct bfa_cb_qe_s    hcb_qe;	 /*  BFA callback qelem */
 	struct bfa_rport_hal_stats_s stats; /*  BFA rport statistics  */
@@ -101,7 +102,7 @@ struct bfa_uf_buf_s {
 struct bfa_uf_s {
 	struct list_head	qe;		/*  queue element	  */
 	struct bfa_s	*bfa;		/*  bfa instance	  */
-	u16        uf_tag;		/*  identifying tag f/w messages */
+	u16        uf_tag;		/*  identifying tag fw msgs     */
 	u16        vf_id;
 	u16        src_rport_handle;
 	u16        rsvd;
@@ -127,7 +128,7 @@ struct bfa_lps_s {
 	u8		reqq;		/*  lport request queue	*/
 	u8		alpa;		/*  ALPA for loop topologies	*/
 	u32	lp_pid;		/*  lport port ID		*/
-	bfa_boolean_t	fdisc;		/*  send FDISC instead of FLOGI*/
+	bfa_boolean_t	fdisc;		/*  send FDISC instead of FLOGI  */
 	bfa_boolean_t	auth_en;	/*  enable authentication	*/
 	bfa_boolean_t	auth_req;	/*  authentication required	*/
 	bfa_boolean_t	npiv_en;	/*  NPIV is allowed by peer	*/
@@ -151,60 +152,69 @@ struct bfa_lps_s {
 	bfa_eproto_status_t	ext_status;
 };
 
+#define BFA_FCPORT(_bfa)        (&((_bfa)->modules.port))
+
 /*
  * bfa pport API functions
  */
-bfa_status_t bfa_pport_enable(struct bfa_s *bfa);
-bfa_status_t bfa_pport_disable(struct bfa_s *bfa);
-bfa_status_t bfa_pport_cfg_speed(struct bfa_s *bfa,
+bfa_status_t bfa_fcport_enable(struct bfa_s *bfa);
+bfa_status_t bfa_fcport_disable(struct bfa_s *bfa);
+bfa_status_t bfa_fcport_cfg_speed(struct bfa_s *bfa,
 			enum bfa_pport_speed speed);
-enum bfa_pport_speed bfa_pport_get_speed(struct bfa_s *bfa);
-bfa_status_t bfa_pport_cfg_topology(struct bfa_s *bfa,
+enum bfa_pport_speed bfa_fcport_get_speed(struct bfa_s *bfa);
+bfa_status_t bfa_fcport_cfg_topology(struct bfa_s *bfa,
 			enum bfa_pport_topology topo);
-enum bfa_pport_topology bfa_pport_get_topology(struct bfa_s *bfa);
-bfa_status_t bfa_pport_cfg_hardalpa(struct bfa_s *bfa, u8 alpa);
-bfa_boolean_t bfa_pport_get_hardalpa(struct bfa_s *bfa, u8 *alpa);
-u8 bfa_pport_get_myalpa(struct bfa_s *bfa);
-bfa_status_t bfa_pport_clr_hardalpa(struct bfa_s *bfa);
-bfa_status_t bfa_pport_cfg_maxfrsize(struct bfa_s *bfa, u16 maxsize);
-u16 bfa_pport_get_maxfrsize(struct bfa_s *bfa);
-u32 bfa_pport_mypid(struct bfa_s *bfa);
-u8 bfa_pport_get_rx_bbcredit(struct bfa_s *bfa);
-bfa_status_t bfa_pport_trunk_enable(struct bfa_s *bfa, u8 bitmap);
-bfa_status_t bfa_pport_trunk_disable(struct bfa_s *bfa);
-bfa_boolean_t bfa_pport_trunk_query(struct bfa_s *bfa, u32 *bitmap);
-void bfa_pport_get_attr(struct bfa_s *bfa, struct bfa_pport_attr_s *attr);
-wwn_t bfa_pport_get_wwn(struct bfa_s *bfa, bfa_boolean_t node);
-bfa_status_t bfa_pport_get_stats(struct bfa_s *bfa,
-			union bfa_pport_stats_u *stats,
-			bfa_cb_pport_t cbfn, void *cbarg);
-bfa_status_t bfa_pport_clear_stats(struct bfa_s *bfa, bfa_cb_pport_t cbfn,
-			void *cbarg);
-void bfa_pport_event_register(struct bfa_s *bfa,
+enum bfa_pport_topology bfa_fcport_get_topology(struct bfa_s *bfa);
+bfa_status_t bfa_fcport_cfg_hardalpa(struct bfa_s *bfa, u8 alpa);
+bfa_boolean_t bfa_fcport_get_hardalpa(struct bfa_s *bfa, u8 *alpa);
+u8 bfa_fcport_get_myalpa(struct bfa_s *bfa);
+bfa_status_t bfa_fcport_clr_hardalpa(struct bfa_s *bfa);
+bfa_status_t bfa_fcport_cfg_maxfrsize(struct bfa_s *bfa, u16 maxsize);
+u16 bfa_fcport_get_maxfrsize(struct bfa_s *bfa);
+u32 bfa_fcport_mypid(struct bfa_s *bfa);
+u8 bfa_fcport_get_rx_bbcredit(struct bfa_s *bfa);
+bfa_status_t bfa_fcport_trunk_enable(struct bfa_s *bfa, u8 bitmap);
+bfa_status_t bfa_fcport_trunk_disable(struct bfa_s *bfa);
+bfa_boolean_t bfa_fcport_trunk_query(struct bfa_s *bfa, u32 *bitmap);
+void bfa_fcport_get_attr(struct bfa_s *bfa, struct bfa_pport_attr_s *attr);
+wwn_t bfa_fcport_get_wwn(struct bfa_s *bfa, bfa_boolean_t node);
+void bfa_fcport_event_register(struct bfa_s *bfa,
 			void (*event_cbfn) (void *cbarg,
 			bfa_pport_event_t event), void *event_cbarg);
-bfa_boolean_t bfa_pport_is_disabled(struct bfa_s *bfa);
-void bfa_pport_cfg_qos(struct bfa_s *bfa, bfa_boolean_t on_off);
-void bfa_pport_cfg_ratelim(struct bfa_s *bfa, bfa_boolean_t on_off);
-bfa_status_t bfa_pport_cfg_ratelim_speed(struct bfa_s *bfa,
+bfa_boolean_t bfa_fcport_is_disabled(struct bfa_s *bfa);
+void bfa_fcport_cfg_qos(struct bfa_s *bfa, bfa_boolean_t on_off);
+void bfa_fcport_cfg_ratelim(struct bfa_s *bfa, bfa_boolean_t on_off);
+bfa_status_t bfa_fcport_cfg_ratelim_speed(struct bfa_s *bfa,
 			enum bfa_pport_speed speed);
-enum bfa_pport_speed bfa_pport_get_ratelim_speed(struct bfa_s *bfa);
+enum bfa_pport_speed bfa_fcport_get_ratelim_speed(struct bfa_s *bfa);
 
-void bfa_pport_set_tx_bbcredit(struct bfa_s *bfa, u16 tx_bbcredit);
-void bfa_pport_busy(struct bfa_s *bfa, bfa_boolean_t status);
-void bfa_pport_beacon(struct bfa_s *bfa, bfa_boolean_t beacon,
+void bfa_fcport_set_tx_bbcredit(struct bfa_s *bfa, u16 tx_bbcredit);
+void bfa_fcport_busy(struct bfa_s *bfa, bfa_boolean_t status);
+void bfa_fcport_beacon(struct bfa_s *bfa, bfa_boolean_t beacon,
 			bfa_boolean_t link_e2e_beacon);
 void bfa_cb_pport_event(void *cbarg, bfa_pport_event_t event);
-void bfa_pport_qos_get_attr(struct bfa_s *bfa, struct bfa_qos_attr_s *qos_attr);
-void bfa_pport_qos_get_vc_attr(struct bfa_s *bfa,
+void bfa_fcport_qos_get_attr(struct bfa_s *bfa,
+			struct bfa_qos_attr_s *qos_attr);
+void bfa_fcport_qos_get_vc_attr(struct bfa_s *bfa,
 			struct bfa_qos_vc_attr_s *qos_vc_attr);
-bfa_status_t bfa_pport_get_qos_stats(struct bfa_s *bfa,
-			union bfa_pport_stats_u *stats,
+bfa_status_t bfa_fcport_get_qos_stats(struct bfa_s *bfa,
+			union bfa_fcport_stats_u *stats,
 			bfa_cb_pport_t cbfn, void *cbarg);
-bfa_status_t bfa_pport_clear_qos_stats(struct bfa_s *bfa, bfa_cb_pport_t cbfn,
+bfa_status_t bfa_fcport_clear_qos_stats(struct bfa_s *bfa, bfa_cb_pport_t cbfn,
 			void *cbarg);
-bfa_boolean_t     bfa_pport_is_ratelim(struct bfa_s *bfa);
-bfa_boolean_t	bfa_pport_is_linkup(struct bfa_s *bfa);
+bfa_status_t bfa_fcport_get_fcoe_stats(struct bfa_s *bfa,
+			union bfa_fcport_stats_u *stats,
+			bfa_cb_pport_t cbfn, void *cbarg);
+bfa_status_t bfa_fcport_clear_fcoe_stats(struct bfa_s *bfa, bfa_cb_pport_t cbfn,
+			void *cbarg);
+
+bfa_boolean_t     bfa_fcport_is_ratelim(struct bfa_s *bfa);
+bfa_boolean_t	bfa_fcport_is_linkup(struct bfa_s *bfa);
+bfa_status_t bfa_fcport_get_stats(struct bfa_s *bfa,
+		union bfa_fcport_stats_u *stats,
+		bfa_cb_pport_t cbfn, void *cbarg);
+bfa_status_t bfa_fcport_clear_stats(struct bfa_s *bfa, bfa_cb_pport_t cbfn,
+		void *cbarg);
 
 /*
  * bfa rport API functions
@@ -293,6 +303,7 @@ void bfa_uf_free(struct bfa_uf_s *uf);
  * bfa lport service api
  */
 
+u32	bfa_lps_get_max_vport(struct bfa_s *bfa);
 struct bfa_lps_s *bfa_lps_alloc(struct bfa_s *bfa);
 void bfa_lps_delete(struct bfa_lps_s *lps);
 void bfa_lps_discard(struct bfa_lps_s *lps);
@@ -315,10 +326,12 @@ wwn_t bfa_lps_get_peer_pwwn(struct bfa_lps_s *lps);
 wwn_t bfa_lps_get_peer_nwwn(struct bfa_lps_s *lps);
 u8 bfa_lps_get_lsrjt_rsn(struct bfa_lps_s *lps);
 u8 bfa_lps_get_lsrjt_expl(struct bfa_lps_s *lps);
+mac_t bfa_lps_get_lp_mac(struct bfa_lps_s *lps);
 void bfa_cb_lps_flogi_comp(void *bfad, void *uarg, bfa_status_t status);
 void bfa_cb_lps_flogo_comp(void *bfad, void *uarg);
 void bfa_cb_lps_fdisc_comp(void *bfad, void *uarg, bfa_status_t status);
 void bfa_cb_lps_fdisclogo_comp(void *bfad, void *uarg);
+void bfa_cb_lps_cvl_event(void *bfad, void *uarg);
 
 #endif /* __BFA_SVC_H__ */
 
diff --git a/drivers/scsi/bfa/include/bfa_timer.h b/drivers/scsi/bfa/include/bfa_timer.h
index e407103fa565..f71087448222 100644
--- a/drivers/scsi/bfa/include/bfa_timer.h
+++ b/drivers/scsi/bfa/include/bfa_timer.h
@@ -41,7 +41,7 @@ struct bfa_timer_mod_s {
 	struct list_head timer_q;
 };
 
-#define BFA_TIMER_FREQ 500 /**< specified in millisecs */
+#define BFA_TIMER_FREQ 200 /**< specified in millisecs */
 
 void bfa_timer_beat(struct bfa_timer_mod_s *mod);
 void bfa_timer_init(struct bfa_timer_mod_s *mod);
diff --git a/drivers/scsi/bfa/include/bfi/bfi.h b/drivers/scsi/bfa/include/bfi/bfi.h
index 7042c18e542d..a550e80cabd2 100644
--- a/drivers/scsi/bfa/include/bfi/bfi.h
+++ b/drivers/scsi/bfa/include/bfi/bfi.h
@@ -143,8 +143,8 @@ enum bfi_mclass {
 	BFI_MC_IOC		= 1,	/*  IO Controller (IOC)	    */
 	BFI_MC_DIAG		= 2,	/*  Diagnostic Msgs		    */
 	BFI_MC_FLASH		= 3,	/*  Flash message class	    */
-	BFI_MC_CEE		= 4,
-	BFI_MC_FC_PORT		= 5,	/*  FC port		   	    */
+	BFI_MC_CEE		= 4,	/*  CEE                     */
+	BFI_MC_FCPORT		= 5,	/*  FC port		   	    */
 	BFI_MC_IOCFC		= 6,	/*  FC - IO Controller (IOC)	    */
 	BFI_MC_LL		= 7,	/*  Link Layer		 	    */
 	BFI_MC_UF		= 8,	/*  Unsolicited frame receive	    */
diff --git a/drivers/scsi/bfa/include/bfi/bfi_cbreg.h b/drivers/scsi/bfa/include/bfi/bfi_cbreg.h
index b3bb52b565b1..a51ee61ddb19 100644
--- a/drivers/scsi/bfa/include/bfi/bfi_cbreg.h
+++ b/drivers/scsi/bfa/include/bfi/bfi_cbreg.h
@@ -177,7 +177,21 @@
 #define __PSS_LMEM_INIT_EN               0x00000100
 #define __PSS_LPU1_RESET                 0x00000002
 #define __PSS_LPU0_RESET                 0x00000001
-
+#define PSS_ERR_STATUS_REG		 0x00018810
+#define __PSS_LMEM1_CORR_ERR		 0x00000800
+#define __PSS_LMEM0_CORR_ERR             0x00000400
+#define __PSS_LMEM1_UNCORR_ERR           0x00000200
+#define __PSS_LMEM0_UNCORR_ERR           0x00000100
+#define __PSS_BAL_PERR                   0x00000080
+#define __PSS_DIP_IF_ERR                 0x00000040
+#define __PSS_IOH_IF_ERR                 0x00000020
+#define __PSS_TDS_IF_ERR                 0x00000010
+#define __PSS_RDS_IF_ERR                 0x00000008
+#define __PSS_SGM_IF_ERR                 0x00000004
+#define __PSS_LPU1_RAM_ERR               0x00000002
+#define __PSS_LPU0_RAM_ERR               0x00000001
+#define ERR_SET_REG			 0x00018818
+#define __PSS_ERR_STATUS_SET		 0x00000fff
 
 /*
  * These definitions are either in error/missing in spec. Its auto-generated
diff --git a/drivers/scsi/bfa/include/bfi/bfi_ctreg.h b/drivers/scsi/bfa/include/bfi/bfi_ctreg.h
index d3caa58c0a0a..57a8497105af 100644
--- a/drivers/scsi/bfa/include/bfi/bfi_ctreg.h
+++ b/drivers/scsi/bfa/include/bfi/bfi_ctreg.h
@@ -430,6 +430,31 @@ enum {
 #define __PSS_LMEM_INIT_EN               0x00000100
 #define __PSS_LPU1_RESET                 0x00000002
 #define __PSS_LPU0_RESET                 0x00000001
+#define PSS_ERR_STATUS_REG               0x00018810
+#define __PSS_LPU1_TCM_READ_ERR          0x00200000
+#define __PSS_LPU0_TCM_READ_ERR          0x00100000
+#define __PSS_LMEM5_CORR_ERR             0x00080000
+#define __PSS_LMEM4_CORR_ERR             0x00040000
+#define __PSS_LMEM3_CORR_ERR             0x00020000
+#define __PSS_LMEM2_CORR_ERR             0x00010000
+#define __PSS_LMEM1_CORR_ERR             0x00008000
+#define __PSS_LMEM0_CORR_ERR             0x00004000
+#define __PSS_LMEM5_UNCORR_ERR           0x00002000
+#define __PSS_LMEM4_UNCORR_ERR           0x00001000
+#define __PSS_LMEM3_UNCORR_ERR           0x00000800
+#define __PSS_LMEM2_UNCORR_ERR           0x00000400
+#define __PSS_LMEM1_UNCORR_ERR           0x00000200
+#define __PSS_LMEM0_UNCORR_ERR           0x00000100
+#define __PSS_BAL_PERR                   0x00000080
+#define __PSS_DIP_IF_ERR                 0x00000040
+#define __PSS_IOH_IF_ERR                 0x00000020
+#define __PSS_TDS_IF_ERR                 0x00000010
+#define __PSS_RDS_IF_ERR                 0x00000008
+#define __PSS_SGM_IF_ERR                 0x00000004
+#define __PSS_LPU1_RAM_ERR               0x00000002
+#define __PSS_LPU0_RAM_ERR               0x00000001
+#define ERR_SET_REG			 0x00018818
+#define __PSS_ERR_STATUS_SET		 0x003fffff
 #define HQM_QSET0_RXQ_DRBL_P0            0x00038000
 #define __RXQ0_ADD_VECTORS_P             0x80000000
 #define __RXQ0_STOP_P                    0x40000000
@@ -589,6 +614,7 @@ enum {
 #define __HFN_INT_MBOX_LPU1                0x00200000U
 #define __HFN_INT_MBOX1_LPU0               0x00400000U
 #define __HFN_INT_MBOX1_LPU1               0x00800000U
+#define __HFN_INT_LL_HALT		   0x01000000U
 #define __HFN_INT_CPE_MASK                 0x000000ffU
 #define __HFN_INT_RME_MASK                 0x0000ff00U
 
diff --git a/drivers/scsi/bfa/include/bfi/bfi_ioc.h b/drivers/scsi/bfa/include/bfi/bfi_ioc.h
index 96ef05670659..a0158aac0024 100644
--- a/drivers/scsi/bfa/include/bfi/bfi_ioc.h
+++ b/drivers/scsi/bfa/include/bfi/bfi_ioc.h
@@ -123,7 +123,7 @@ enum bfi_ioc_state {
 	BFI_IOC_DISABLING 	 = 5,	/*  IOC is being disabled           */
 	BFI_IOC_DISABLED 	 = 6,	/*  IOC is disabled                 */
 	BFI_IOC_CFG_DISABLED = 7,	/*  IOC is being disabled;transient */
-	BFI_IOC_HBFAIL       = 8,	/*  IOC heart-beat failure          */
+	BFI_IOC_FAIL       = 8,		/*  IOC heart-beat failure          */
 	BFI_IOC_MEMTEST      = 9,	/*  IOC is doing memtest            */
 };
 
diff --git a/drivers/scsi/bfa/include/bfi/bfi_lps.h b/drivers/scsi/bfa/include/bfi/bfi_lps.h
index c59d47badb4b..7ed31bbb8696 100644
--- a/drivers/scsi/bfa/include/bfi/bfi_lps.h
+++ b/drivers/scsi/bfa/include/bfi/bfi_lps.h
@@ -30,6 +30,7 @@ enum bfi_lps_h2i_msgs {
 enum bfi_lps_i2h_msgs {
 	BFI_LPS_H2I_LOGIN_RSP	= BFA_I2HM(1),
 	BFI_LPS_H2I_LOGOUT_RSP	= BFA_I2HM(2),
+	BFI_LPS_H2I_CVL_EVENT   = BFA_I2HM(3),
 };
 
 struct bfi_lps_login_req_s {
@@ -77,6 +78,12 @@ struct bfi_lps_logout_rsp_s {
 	u8		rsvd[2];
 };
 
+struct bfi_lps_cvl_event_s {
+	struct bfi_mhdr_s  mh;      /* common msg header      */
+	u8		lp_tag;
+	u8		rsvd[3];
+};
+
 union bfi_lps_h2i_msg_u {
 	struct bfi_mhdr_s		*msg;
 	struct bfi_lps_login_req_s	*login_req;
@@ -87,6 +94,7 @@ union bfi_lps_i2h_msg_u {
 	struct bfi_msg_s		*msg;
 	struct bfi_lps_login_rsp_s	*login_rsp;
 	struct bfi_lps_logout_rsp_s	*logout_rsp;
+	struct bfi_lps_cvl_event_s	*cvl_event;
 };
 
 #pragma pack()
diff --git a/drivers/scsi/bfa/include/bfi/bfi_pport.h b/drivers/scsi/bfa/include/bfi/bfi_pport.h
index c96d246851af..50dcf45c7470 100644
--- a/drivers/scsi/bfa/include/bfi/bfi_pport.h
+++ b/drivers/scsi/bfa/include/bfi/bfi_pport.h
@@ -22,163 +22,97 @@
 
 #pragma pack(1)
 
-enum bfi_pport_h2i {
-	BFI_PPORT_H2I_ENABLE_REQ		= (1),
-	BFI_PPORT_H2I_DISABLE_REQ		= (2),
-	BFI_PPORT_H2I_GET_STATS_REQ		= (3),
-	BFI_PPORT_H2I_CLEAR_STATS_REQ	= (4),
-	BFI_PPORT_H2I_SET_SVC_PARAMS_REQ	= (5),
-	BFI_PPORT_H2I_ENABLE_RX_VF_TAG_REQ	= (6),
-	BFI_PPORT_H2I_ENABLE_TX_VF_TAG_REQ	= (7),
-	BFI_PPORT_H2I_GET_QOS_STATS_REQ		= (8),
-	BFI_PPORT_H2I_CLEAR_QOS_STATS_REQ	= (9),
+enum bfi_fcport_h2i {
+	BFI_FCPORT_H2I_ENABLE_REQ		= (1),
+	BFI_FCPORT_H2I_DISABLE_REQ		= (2),
+	BFI_FCPORT_H2I_SET_SVC_PARAMS_REQ	= (3),
+	BFI_FCPORT_H2I_STATS_GET_REQ		= (4),
+	BFI_FCPORT_H2I_STATS_CLEAR_REQ		= (5),
 };
 
-enum bfi_pport_i2h {
-	BFI_PPORT_I2H_ENABLE_RSP		= BFA_I2HM(1),
-	BFI_PPORT_I2H_DISABLE_RSP		= BFA_I2HM(2),
-	BFI_PPORT_I2H_GET_STATS_RSP		= BFA_I2HM(3),
-	BFI_PPORT_I2H_CLEAR_STATS_RSP	= BFA_I2HM(4),
-	BFI_PPORT_I2H_SET_SVC_PARAMS_RSP	= BFA_I2HM(5),
-	BFI_PPORT_I2H_ENABLE_RX_VF_TAG_RSP	= BFA_I2HM(6),
-	BFI_PPORT_I2H_ENABLE_TX_VF_TAG_RSP	= BFA_I2HM(7),
-	BFI_PPORT_I2H_EVENT			= BFA_I2HM(8),
-	BFI_PPORT_I2H_GET_QOS_STATS_RSP		= BFA_I2HM(9),
-	BFI_PPORT_I2H_CLEAR_QOS_STATS_RSP	= BFA_I2HM(10),
+enum bfi_fcport_i2h {
+	BFI_FCPORT_I2H_ENABLE_RSP		= BFA_I2HM(1),
+	BFI_FCPORT_I2H_DISABLE_RSP		= BFA_I2HM(2),
+	BFI_FCPORT_I2H_SET_SVC_PARAMS_RSP	= BFA_I2HM(3),
+	BFI_FCPORT_I2H_STATS_GET_RSP		= BFA_I2HM(4),
+	BFI_FCPORT_I2H_STATS_CLEAR_RSP		= BFA_I2HM(5),
+	BFI_FCPORT_I2H_EVENT			= BFA_I2HM(6),
 };
 
 /**
  * Generic REQ type
  */
-struct bfi_pport_generic_req_s {
+struct bfi_fcport_req_s {
 	struct bfi_mhdr_s  mh;		/*  msg header			    */
-	u32        msgtag;		/*  msgtag for reply		    */
+	u32	   msgtag;	/*  msgtag for reply		    */
 };
 
 /**
  * Generic RSP type
  */
-struct bfi_pport_generic_rsp_s {
+struct bfi_fcport_rsp_s {
 	struct bfi_mhdr_s  mh;		/*  common msg header		    */
-	u8         status;		/*  port enable status		    */
-	u8         rsvd[3];
-	u32        msgtag;		/*  msgtag for reply		    */
+	u8		   status;	/*  port enable status		    */
+	u8		   rsvd[3];
+	u32	   msgtag;	/*  msgtag for reply		    */
 };
 
 /**
- * BFI_PPORT_H2I_ENABLE_REQ
+ * BFI_FCPORT_H2I_ENABLE_REQ
  */
-struct bfi_pport_enable_req_s {
+struct bfi_fcport_enable_req_s {
 	struct bfi_mhdr_s  mh;		/*  msg header			    */
-	u32        rsvd1;
-	wwn_t           nwwn;		/*  node wwn of physical port	    */
-	wwn_t           pwwn;		/*  port wwn of physical port	    */
-	struct bfa_pport_cfg_s port_cfg;	/*  port configuration	    */
-	union bfi_addr_u  stats_dma_addr;	/*  DMA address for stats  */
-	u32        msgtag;		/*  msgtag for reply		    */
-	u32        rsvd2;
+	u32	   rsvd1;
+	wwn_t		   nwwn;	/*  node wwn of physical port	    */
+	wwn_t		   pwwn;	/*  port wwn of physical port	    */
+	struct bfa_pport_cfg_s port_cfg; /*  port configuration	    */
+	union bfi_addr_u   stats_dma_addr; /*  DMA address for stats	    */
+	u32	   msgtag;	/*  msgtag for reply		    */
+	u32	   rsvd2;
 };
 
 /**
- * BFI_PPORT_I2H_ENABLE_RSP
+ * BFI_FCPORT_H2I_SET_SVC_PARAMS_REQ
  */
-#define bfi_pport_enable_rsp_t struct bfi_pport_generic_rsp_s
-
-/**
- * BFI_PPORT_H2I_DISABLE_REQ
- */
-#define bfi_pport_disable_req_t struct bfi_pport_generic_req_s
-
-/**
- * BFI_PPORT_I2H_DISABLE_RSP
- */
-#define bfi_pport_disable_rsp_t struct bfi_pport_generic_rsp_s
-
-/**
- * BFI_PPORT_H2I_GET_STATS_REQ
- */
-#define bfi_pport_get_stats_req_t struct bfi_pport_generic_req_s
-
-/**
- * BFI_PPORT_I2H_GET_STATS_RSP
- */
-#define bfi_pport_get_stats_rsp_t struct bfi_pport_generic_rsp_s
-
-/**
- * BFI_PPORT_H2I_CLEAR_STATS_REQ
- */
-#define bfi_pport_clear_stats_req_t struct bfi_pport_generic_req_s
-
-/**
- * BFI_PPORT_I2H_CLEAR_STATS_RSP
- */
-#define bfi_pport_clear_stats_rsp_t struct bfi_pport_generic_rsp_s
-
-/**
- * BFI_PPORT_H2I_GET_QOS_STATS_REQ
- */
-#define bfi_pport_get_qos_stats_req_t struct bfi_pport_generic_req_s
-
-/**
- * BFI_PPORT_H2I_GET_QOS_STATS_RSP
- */
-#define bfi_pport_get_qos_stats_rsp_t struct bfi_pport_generic_rsp_s
-
-/**
- * BFI_PPORT_H2I_CLEAR_QOS_STATS_REQ
- */
-#define bfi_pport_clear_qos_stats_req_t struct bfi_pport_generic_req_s
-
-/**
- * BFI_PPORT_H2I_CLEAR_QOS_STATS_RSP
- */
-#define bfi_pport_clear_qos_stats_rsp_t struct bfi_pport_generic_rsp_s
-
-/**
- * BFI_PPORT_H2I_SET_SVC_PARAMS_REQ
- */
-struct bfi_pport_set_svc_params_req_s {
+struct bfi_fcport_set_svc_params_req_s {
 	struct bfi_mhdr_s  mh;		/*  msg header */
-	u16        tx_bbcredit;	/*  Tx credits */
-	u16        rsvd;
+	u16	   tx_bbcredit;	/*  Tx credits */
+	u16	   rsvd;
 };
 
 /**
- * BFI_PPORT_I2H_SET_SVC_PARAMS_RSP
- */
-
-/**
- * BFI_PPORT_I2H_EVENT
+ * BFI_FCPORT_I2H_EVENT
  */
-struct bfi_pport_event_s {
+struct bfi_fcport_event_s {
 	struct bfi_mhdr_s 	mh;	/*  common msg header */
 	struct bfa_pport_link_s	link_state;
 };
 
-union bfi_pport_h2i_msg_u {
+/**
+ * fcport H2I message
+ */
+union bfi_fcport_h2i_msg_u {
 	struct bfi_mhdr_s			*mhdr;
-	struct bfi_pport_enable_req_s		*penable;
-	struct bfi_pport_generic_req_s		*pdisable;
-	struct bfi_pport_generic_req_s		*pgetstats;
-	struct bfi_pport_generic_req_s		*pclearstats;
-	struct bfi_pport_set_svc_params_req_s	*psetsvcparams;
-	struct bfi_pport_get_qos_stats_req_s	*pgetqosstats;
-	struct bfi_pport_generic_req_s		*pclearqosstats;
+	struct bfi_fcport_enable_req_s		*penable;
+	struct bfi_fcport_req_s			*pdisable;
+	struct bfi_fcport_set_svc_params_req_s	*psetsvcparams;
+	struct bfi_fcport_req_s			*pstatsget;
+	struct bfi_fcport_req_s			*pstatsclear;
 };
 
-union bfi_pport_i2h_msg_u {
+/**
+ * fcport I2H message
+ */
+union bfi_fcport_i2h_msg_u {
 	struct bfi_msg_s			*msg;
-	struct bfi_pport_generic_rsp_s		*enable_rsp;
-	struct bfi_pport_disable_rsp_s		*disable_rsp;
-	struct bfi_pport_generic_rsp_s		*getstats_rsp;
-	struct bfi_pport_clear_stats_rsp_s	*clearstats_rsp;
-	struct bfi_pport_set_svc_params_rsp_s	*setsvcparasm_rsp;
-	struct bfi_pport_get_qos_stats_rsp_s	*getqosstats_rsp;
-	struct bfi_pport_clear_qos_stats_rsp_s	*clearqosstats_rsp;
-	struct bfi_pport_event_s		*event;
+	struct bfi_fcport_rsp_s			*penable_rsp;
+	struct bfi_fcport_rsp_s			*pdisable_rsp;
+	struct bfi_fcport_rsp_s			*psetsvcparams_rsp;
+	struct bfi_fcport_rsp_s			*pstatsget_rsp;
+	struct bfi_fcport_rsp_s			*pstatsclear_rsp;
+	struct bfi_fcport_event_s		*event;
 };
 
 #pragma pack()
 
 #endif /* __BFI_PPORT_H__ */
-
diff --git a/drivers/scsi/bfa/include/cna/bfa_cna_trcmod.h b/drivers/scsi/bfa/include/cna/bfa_cna_trcmod.h
index 43ba7064e81a..a75a1f3be315 100644
--- a/drivers/scsi/bfa/include/cna/bfa_cna_trcmod.h
+++ b/drivers/scsi/bfa/include/cna/bfa_cna_trcmod.h
@@ -31,6 +31,10 @@
 enum {
 	BFA_TRC_CNA_CEE		= 1,
 	BFA_TRC_CNA_PORT	= 2,
+	BFA_TRC_CNA_IOC     = 3,
+	BFA_TRC_CNA_DIAG    = 4,
+	BFA_TRC_CNA_IOC_CB  = 5,
+	BFA_TRC_CNA_IOC_CT  = 6,
 };
 
 #endif /* __BFA_CNA_TRCMOD_H__ */
diff --git a/drivers/scsi/bfa/include/cs/bfa_log.h b/drivers/scsi/bfa/include/cs/bfa_log.h
index 761cbe22130a..bc334e0a93fa 100644
--- a/drivers/scsi/bfa/include/cs/bfa_log.h
+++ b/drivers/scsi/bfa/include/cs/bfa_log.h
@@ -157,7 +157,7 @@ typedef void (*bfa_log_cb_t)(struct bfa_log_mod_s *log_mod, u32 msg_id,
 
 
 struct bfa_log_mod_s {
-	char		instance_info[16];	/*  instance info */
+	char		instance_info[BFA_STRING_32];	/*  instance info */
 	int		log_level[BFA_LOG_MODULE_ID_MAX + 1];
 						/*  log level for modules */
 	bfa_log_cb_t	cbfn; 			/*  callback function */
diff --git a/drivers/scsi/bfa/include/cs/bfa_plog.h b/drivers/scsi/bfa/include/cs/bfa_plog.h
index 670f86e5fc6e..f5bef63b5877 100644
--- a/drivers/scsi/bfa/include/cs/bfa_plog.h
+++ b/drivers/scsi/bfa/include/cs/bfa_plog.h
@@ -80,7 +80,8 @@ enum bfa_plog_mid {
 	BFA_PL_MID_HAL_FCXP 	= 4,
 	BFA_PL_MID_HAL_UF 	= 5,
 	BFA_PL_MID_FCS 		= 6,
-	BFA_PL_MID_MAX 		= 7
+	BFA_PL_MID_LPS		= 7,
+	BFA_PL_MID_MAX 		= 8
 };
 
 #define BFA_PL_MID_STRLEN    8
@@ -118,7 +119,11 @@ enum bfa_plog_eid {
 	BFA_PL_EID_RSCN 		= 17,
 	BFA_PL_EID_DEBUG 		= 18,
 	BFA_PL_EID_MISC 		= 19,
-	BFA_PL_EID_MAX 			= 20
+	BFA_PL_EID_FIP_FCF_DISC		= 20,
+	BFA_PL_EID_FIP_FCF_CVL		= 21,
+	BFA_PL_EID_LOGIN		= 22,
+	BFA_PL_EID_LOGO			= 23,
+	BFA_PL_EID_MAX			= 24
 };
 
 #define BFA_PL_ENAME_STRLEN    	8
diff --git a/drivers/scsi/bfa/include/cs/bfa_sm.h b/drivers/scsi/bfa/include/cs/bfa_sm.h
index b0a92baf6657..11fba9082f05 100644
--- a/drivers/scsi/bfa/include/cs/bfa_sm.h
+++ b/drivers/scsi/bfa/include/cs/bfa_sm.h
@@ -23,6 +23,14 @@
 #define __BFA_SM_H__
 
 typedef void (*bfa_sm_t)(void *sm, int event);
+/**
+ * oc - object class eg. bfa_ioc
+ * st - state, eg. reset
+ * otype - object type, eg. struct bfa_ioc_s
+ * etype - object type, eg. enum ioc_event
+ */
+#define bfa_sm_state_decl(oc, st, otype, etype)         \
+	static void oc ## _sm_ ## st(otype * fsm, etype event)
 
 #define bfa_sm_set_state(_sm, _state)	((_sm)->sm = (bfa_sm_t)(_state))
 #define bfa_sm_send_event(_sm, _event)	((_sm)->sm((_sm), (_event)))
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_aen.h b/drivers/scsi/bfa/include/defs/bfa_defs_aen.h
index 4c81a613db3d..35244698fcdc 100644
--- a/drivers/scsi/bfa/include/defs/bfa_defs_aen.h
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_aen.h
@@ -30,6 +30,16 @@
 #include <defs/bfa_defs_audit.h>
 #include <defs/bfa_defs_ethport.h>
 
+#define BFA_AEN_MAX_APP         5
+
+enum bfa_aen_app {
+	bfa_aen_app_bcu = 0,    /* No thread for bcu */
+	bfa_aen_app_hcm = 1,
+	bfa_aen_app_cim = 2,
+	bfa_aen_app_snia = 3,
+	bfa_aen_app_test = 4,   /* To be removed after unit test */
+};
+
 enum bfa_aen_category {
 	BFA_AEN_CAT_ADAPTER 	= 1,
 	BFA_AEN_CAT_PORT 	= 2,
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_auth.h b/drivers/scsi/bfa/include/defs/bfa_defs_auth.h
index dd19c83aba58..45df32820911 100644
--- a/drivers/scsi/bfa/include/defs/bfa_defs_auth.h
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_auth.h
@@ -23,6 +23,7 @@
 #define PRIVATE_KEY			19009
 #define KEY_LEN				32399
 #define BFA_AUTH_SECRET_STRING_LEN	256
+#define BFA_AUTH_FAIL_NO_PASSWORD	0xFE
 #define BFA_AUTH_FAIL_TIMEOUT		0xFF
 
 /**
@@ -41,6 +42,27 @@ enum bfa_auth_status {
 	BFA_AUTH_STATUS_UNKNOWN = 9,	/*  authentication status unknown */
 };
 
+enum bfa_auth_rej_code {
+	BFA_AUTH_RJT_CODE_AUTH_FAILURE   = 1, /* auth failure */
+	BFA_AUTH_RJT_CODE_LOGICAL_ERR    = 2, /* logical error */
+};
+
+/**
+ * Authentication reject codes
+ */
+enum bfa_auth_rej_code_exp {
+	BFA_AUTH_MECH_NOT_USABLE        = 1, /* auth. mechanism not usable */
+	BFA_AUTH_DH_GROUP_NOT_USABLE    = 2, /* DH Group not usable */
+	BFA_AUTH_HASH_FUNC_NOT_USABLE   = 3, /* hash Function not usable */
+	BFA_AUTH_AUTH_XACT_STARTED      = 4, /* auth xact started */
+	BFA_AUTH_AUTH_FAILED            = 5, /* auth failed */
+	BFA_AUTH_INCORRECT_PLD          = 6, /* incorrect payload */
+	BFA_AUTH_INCORRECT_PROTO_MSG    = 7, /* incorrect proto msg */
+	BFA_AUTH_RESTART_AUTH_PROTO     = 8, /* restart auth protocol */
+	BFA_AUTH_AUTH_CONCAT_NOT_SUPP   = 9, /* auth concat not supported */
+	BFA_AUTH_PROTO_VER_NOT_SUPP     = 10,/* proto version not supported */
+};
+
 struct auth_proto_stats_s {
 	u32        auth_rjts;
 	u32        auth_negs;
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_cee.h b/drivers/scsi/bfa/include/defs/bfa_defs_cee.h
index 520a22f52dd1..b0ac9ac15c5d 100644
--- a/drivers/scsi/bfa/include/defs/bfa_defs_cee.h
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_cee.h
@@ -28,10 +28,6 @@
 
 #define BFA_CEE_LLDP_MAX_STRING_LEN (128)
 
-
-/* FIXME: this is coming from the protocol spec. Can the host & apps share the
-   protocol .h files ?
- */
 #define BFA_CEE_LLDP_SYS_CAP_OTHER       0x0001
 #define BFA_CEE_LLDP_SYS_CAP_REPEATER    0x0002
 #define BFA_CEE_LLDP_SYS_CAP_MAC_BRIDGE  0x0004
@@ -94,9 +90,10 @@ struct bfa_cee_dcbx_cfg_s {
 /* CEE status */
 /* Making this to tri-state for the benefit of port list command */
 enum bfa_cee_status_e {
-    CEE_PHY_DOWN = 0,
-    CEE_PHY_UP = 1,
-    CEE_UP = 2,
+	CEE_UP = 0,
+	CEE_PHY_UP = 1,
+	CEE_LOOPBACK = 2,
+	CEE_PHY_DOWN = 3,
 };
 
 /* CEE Query */
@@ -107,7 +104,8 @@ struct bfa_cee_attr_s {
 	struct bfa_cee_dcbx_cfg_s dcbx_remote;
 	mac_t src_mac;
 	u8 link_speed;
-	u8 filler[3];
+	u8 nw_priority;
+	u8 filler[2];
 };
 
 
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_driver.h b/drivers/scsi/bfa/include/defs/bfa_defs_driver.h
index 57049805762b..50382dd2ab41 100644
--- a/drivers/scsi/bfa/include/defs/bfa_defs_driver.h
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_driver.h
@@ -21,6 +21,7 @@
 /**
  * Driver statistics
  */
+struct bfa_driver_stats_s {
 	u16    tm_io_abort;
     u16    tm_io_abort_comp;
     u16    tm_lun_reset;
@@ -34,7 +35,7 @@
     u64    output_req;
     u64    input_words;
     u64    output_words;
-} bfa_driver_stats_t;
+};
 
 
 #endif /* __BFA_DEFS_DRIVER_H__ */
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_ethport.h b/drivers/scsi/bfa/include/defs/bfa_defs_ethport.h
index 79f9b3e146f7..b4fa0923aa89 100644
--- a/drivers/scsi/bfa/include/defs/bfa_defs_ethport.h
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_ethport.h
@@ -19,6 +19,7 @@
 #define __BFA_DEFS_ETHPORT_H__
 
 #include <defs/bfa_defs_status.h>
+#include <defs/bfa_defs_port.h>
 #include <protocol/types.h>
 #include <cna/pstats/phyport_defs.h>
 #include <cna/pstats/ethport_defs.h>
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_fcport.h b/drivers/scsi/bfa/include/defs/bfa_defs_fcport.h
new file mode 100644
index 000000000000..a07ef4a3cd78
--- /dev/null
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_fcport.h
@@ -0,0 +1,94 @@
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ *  bfa_defs_fcport.h
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_DEFS_FCPORT_H__
+#define __BFA_DEFS_FCPORT_H__
+
+#include <defs/bfa_defs_types.h>
+#include <protocol/types.h>
+
+#pragma pack(1)
+
+/**
+ * FCoE statistics
+ */
+struct bfa_fcoe_stats_s {
+	u64	secs_reset;	/*  Seconds since stats reset	     */
+	u64	cee_linkups;	/*  CEE link up		     */
+	u64	cee_linkdns;	/*  CEE link down		     */
+	u64	fip_linkups;	/*  FIP link up		     */
+	u64	fip_linkdns;	/*  FIP link down		     */
+	u64	fip_fails;	/*  FIP failures		     */
+	u64	mac_invalids;	/*  Invalid mac assignments	     */
+	u64	vlan_req;	/*  Vlan requests		     */
+	u64	vlan_notify;	/*  Vlan notifications		     */
+	u64	vlan_err;	/*  Vlan notification errors	     */
+	u64	vlan_timeouts;	/*  Vlan request timeouts	     */
+	u64	vlan_invalids;	/*  Vlan invalids		     */
+	u64	disc_req;	/*  Discovery requests		     */
+	u64	disc_rsp;	/*  Discovery responses	     */
+	u64	disc_err;	/*  Discovery error frames	     */
+	u64	disc_unsol;	/*  Discovery unsolicited	     */
+	u64	disc_timeouts;	/*  Discovery timeouts		     */
+	u64	disc_fcf_unavail; /*  Discovery FCF not avail	     */
+	u64	linksvc_unsupp;	/*  FIP link service req unsupp.    */
+	u64	linksvc_err;	/*  FIP link service req errors     */
+	u64	logo_req;	/*  FIP logo			     */
+	u64	clrvlink_req;	/*  Clear virtual link requests     */
+	u64	op_unsupp;	/*  FIP operation unsupp.	     */
+	u64	untagged;	/*  FIP untagged frames	     */
+	u64	txf_ucast;	/*  Tx FCoE unicast frames	     */
+	u64	txf_ucast_vlan;	/*  Tx FCoE unicast vlan frames     */
+	u64	txf_ucast_octets; /*  Tx FCoE unicast octets	     */
+	u64	txf_mcast;	/*  Tx FCoE mutlicast frames	     */
+	u64	txf_mcast_vlan;	/*  Tx FCoE mutlicast vlan frames   */
+	u64	txf_mcast_octets; /*  Tx FCoE multicast octets	     */
+	u64	txf_bcast;	/*  Tx FCoE broadcast frames	     */
+	u64	txf_bcast_vlan;	/*  Tx FCoE broadcast vlan frames   */
+	u64	txf_bcast_octets; /*  Tx FCoE broadcast octets	     */
+	u64	txf_timeout;	/*  Tx timeouts		     */
+	u64	txf_parity_errors; /*  Transmit parity err	     */
+	u64	txf_fid_parity_errors; /*  Transmit FID parity err  */
+	u64	tx_pause;	/*  Tx pause frames		     */
+	u64	tx_zero_pause;	/*  Tx zero pause frames	     */
+	u64	tx_first_pause;	/*  Tx first pause frames	     */
+	u64	rx_pause;	/*  Rx pause frames		     */
+	u64	rx_zero_pause;	/*  Rx zero pause frames	     */
+	u64	rx_first_pause;	/*  Rx first pause frames	     */
+	u64	rxf_ucast_octets; /*  Rx unicast octets	     */
+	u64	rxf_ucast;	/*  Rx unicast frames		     */
+	u64	rxf_ucast_vlan;	/*  Rx unicast vlan frames	     */
+	u64	rxf_mcast_octets; /*  Rx multicast octets	     */
+	u64	rxf_mcast;	/*  Rx multicast frames	     */
+	u64	rxf_mcast_vlan;	/*  Rx multicast vlan frames	     */
+	u64	rxf_bcast_octets; /*  Rx broadcast octests	     */
+	u64	rxf_bcast;	/*  Rx broadcast frames	     */
+	u64	rxf_bcast_vlan;	/*  Rx broadcast vlan frames	     */
+};
+
+/**
+ * QoS or FCoE stats (fcport stats excluding physical FC port stats)
+ */
+union bfa_fcport_stats_u {
+	struct bfa_qos_stats_s	fcqos;
+	struct bfa_fcoe_stats_s	fcoe;
+};
+
+#pragma pack()
+
+#endif  /* __BFA_DEFS_FCPORT_H__ */
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_im_common.h b/drivers/scsi/bfa/include/defs/bfa_defs_im_common.h
deleted file mode 100644
index 9ccf53bef65a..000000000000
--- a/drivers/scsi/bfa/include/defs/bfa_defs_im_common.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- */
-
-#ifndef __BFA_DEFS_IM_COMMON_H__
-#define __BFA_DEFS_IM_COMMON_H__
-
-#define	BFA_ADAPTER_NAME_LEN	256
-#define BFA_ADAPTER_GUID_LEN    256
-#define RESERVED_VLAN_NAME      L"PORT VLAN"
-#define PASSTHRU_VLAN_NAME      L"PASSTHRU VLAN"
-
-	u64	tx_pkt_cnt;
-	u64	rx_pkt_cnt;
-	u32	duration;
-	u8		status;
-} bfa_im_stats_t, *pbfa_im_stats_t;
-
-#endif /* __BFA_DEFS_IM_COMMON_H__ */
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_im_team.h b/drivers/scsi/bfa/include/defs/bfa_defs_im_team.h
deleted file mode 100644
index a486a7eb81d6..000000000000
--- a/drivers/scsi/bfa/include/defs/bfa_defs_im_team.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- */
-
-#ifndef __BFA_DEFS_IM_TEAM_H__
-#define __BFA_DEFS_IM_TEAM_H__
-
-#include <protocol/types.h>
-
-#define	BFA_TEAM_MAX_PORTS	8
-#define	BFA_TEAM_NAME_LEN	256
-#define BFA_MAX_NUM_TEAMS	16
-#define BFA_TEAM_INVALID_DELAY -1
-
-	BFA_LACP_RATE_SLOW = 1,
-	BFA_LACP_RATE_FAST
-} bfa_im_lacp_rate_t;
-
-	BFA_TEAM_MODE_FAIL_OVER = 1,
-	BFA_TEAM_MODE_FAIL_BACK,
-	BFA_TEAM_MODE_LACP,
-	BFA_TEAM_MODE_NONE
-} bfa_im_team_mode_t;
-
-	BFA_XMIT_POLICY_L2 = 1,
-	BFA_XMIT_POLICY_L3_L4
-} bfa_im_xmit_policy_t;
-
-	bfa_im_team_mode_t     team_mode;
-	bfa_im_lacp_rate_t     lacp_rate;
-	bfa_im_xmit_policy_t   xmit_policy;
-	int   	          delay;
-	wchar_t    	  primary[BFA_ADAPTER_NAME_LEN];
-	wchar_t        	  preferred_primary[BFA_ADAPTER_NAME_LEN];
-	mac_t	          mac;
-	u16       	  num_ports;
-	u16          num_vlans;
-	u16 vlan_list[BFA_MAX_VLANS_PER_PORT];
-	wchar_t	 team_guid_list[BFA_TEAM_MAX_PORTS][BFA_ADAPTER_GUID_LEN];
-	wchar_t	 ioc_name_list[BFA_TEAM_MAX_PORTS][BFA_ADAPTER_NAME_LEN];
-} bfa_im_team_attr_t;
-
-	wchar_t		             team_name[BFA_TEAM_NAME_LEN];
-	bfa_im_xmit_policy_t	 xmit_policy;
-	int                 	 delay;
-	wchar_t                	 primary[BFA_ADAPTER_NAME_LEN];
-	wchar_t               	 preferred_primary[BFA_ADAPTER_NAME_LEN];
-} bfa_im_team_edit_t, *pbfa_im_team_edit_t;
-
-	wchar_t					team_name[BFA_TEAM_NAME_LEN];
-	bfa_im_team_mode_t      team_mode;
-	mac_t	               	mac;
-} bfa_im_team_info_t;
-
-	bfa_im_team_info_t 		team_info[BFA_MAX_NUM_TEAMS];
-	u16 				num_teams;
-} bfa_im_team_list_t, *pbfa_im_team_list_t;
-
-#endif /* __BFA_DEFS_IM_TEAM_H__ */
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_ioc.h b/drivers/scsi/bfa/include/defs/bfa_defs_ioc.h
index b1d532da3a9d..8d8e6a966537 100644
--- a/drivers/scsi/bfa/include/defs/bfa_defs_ioc.h
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_ioc.h
@@ -126,6 +126,7 @@ struct bfa_ioc_attr_s {
 	struct bfa_ioc_driver_attr_s 	driver_attr;	/*  driver attr    */
 	struct bfa_ioc_pci_attr_s	pci_attr;
 	u8				port_id;	/*  port number    */
+	u8				rsvd[7];	/*!< 64bit align    */
 };
 
 /**
@@ -143,8 +144,8 @@ enum bfa_ioc_aen_event {
  * BFA IOC level event data, now just a place holder
  */
 struct bfa_ioc_aen_data_s {
-	enum bfa_ioc_type_e ioc_type;
 	wwn_t	pwwn;
+	s16 ioc_type;
 	mac_t	mac;
 };
 
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_iocfc.h b/drivers/scsi/bfa/include/defs/bfa_defs_iocfc.h
index d76bcbd9820f..c290fb13d2d1 100644
--- a/drivers/scsi/bfa/include/defs/bfa_defs_iocfc.h
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_iocfc.h
@@ -26,6 +26,8 @@
 
 #define BFA_IOCFC_INTR_DELAY	1125
 #define BFA_IOCFC_INTR_LATENCY	225
+#define BFA_IOCFCOE_INTR_DELAY  25
+#define BFA_IOCFCOE_INTR_LATENCY 5
 
 /**
  * Interrupt coalescing configuration.
@@ -50,7 +52,7 @@ struct bfa_iocfc_fwcfg_s {
 	u16        num_fcxp_reqs;	/*  unassisted FC exchanges	*/
 	u16        num_uf_bufs;	/*  unsolicited recv buffers	*/
 	u8		num_cqs;
-	u8		rsvd;
+	u8		rsvd[5];
 };
 
 struct bfa_iocfc_drvcfg_s {
@@ -224,18 +226,24 @@ struct bfa_fw_port_physm_stats_s {
 
 
 struct bfa_fw_fip_stats_s {
+    u32    vlan_req;           /*  vlan discovery requests             */
+    u32    vlan_notify;        /*  vlan notifications                  */
+    u32    vlan_err;           /*  vlan response error                 */
+    u32    vlan_timeouts;      /*  vlan disvoery timeouts              */
+    u32    vlan_invalids;      /*  invalid vlan in discovery advert.   */
     u32    disc_req;           /*  Discovery solicit requests          */
     u32    disc_rsp;           /*  Discovery solicit response          */
     u32    disc_err;           /*  Discovery advt. parse errors        */
     u32    disc_unsol;         /*  Discovery unsolicited               */
     u32    disc_timeouts;      /*  Discovery timeouts                  */
+    u32    disc_fcf_unavail;   /*  Discovery FCF Not Avail.            */
     u32    linksvc_unsupp;     /*  Unsupported link service req        */
     u32    linksvc_err;        /*  Parse error in link service req     */
     u32    logo_req;           /*  Number of FIP logos received        */
     u32    clrvlink_req;       /*  Clear virtual link req              */
     u32    op_unsupp;          /*  Unsupported FIP operation           */
     u32    untagged;           /*  Untagged frames (ignored)           */
-    u32    rsvd;
+    u32	   invalid_version;    /*!< Invalid FIP version           */
 };
 
 
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_lport.h b/drivers/scsi/bfa/include/defs/bfa_defs_lport.h
index 7359f82aacfc..0952a139c47c 100644
--- a/drivers/scsi/bfa/include/defs/bfa_defs_lport.h
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_lport.h
@@ -59,8 +59,8 @@ enum bfa_lport_aen_event {
  */
 struct bfa_lport_aen_data_s {
 	u16        vf_id;	/*  vf_id of this logical port */
-	u16        rsvd;
-	enum bfa_port_role roles;	/*  Logical port mode,IM/TM/IP etc */
+	s16         roles;  /*  Logical port mode,IM/TM/IP etc */
+	u32        rsvd;
 	wwn_t           ppwwn;	/*  WWN of its physical port */
 	wwn_t           lpwwn;	/*  WWN of this logical port */
 };
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_mfg.h b/drivers/scsi/bfa/include/defs/bfa_defs_mfg.h
index 13fd4ab6aae2..c5bd9c36ad4d 100644
--- a/drivers/scsi/bfa/include/defs/bfa_defs_mfg.h
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_mfg.h
@@ -22,7 +22,47 @@
 /**
  * Manufacturing block version
  */
-#define BFA_MFG_VERSION				1
+#define BFA_MFG_VERSION				2
+
+/**
+ * Manufacturing block encrypted version
+ */
+#define BFA_MFG_ENC_VER				2
+
+/**
+ * Manufacturing block version 1 length
+ */
+#define BFA_MFG_VER1_LEN			128
+
+/**
+ * Manufacturing block header length
+ */
+#define BFA_MFG_HDR_LEN				4
+
+/**
+ * Checksum size
+ */
+#define BFA_MFG_CHKSUM_SIZE			16
+
+/**
+ * Manufacturing block encrypted version
+ */
+#define BFA_MFG_ENC_VER				2
+
+/**
+ * Manufacturing block version 1 length
+ */
+#define BFA_MFG_VER1_LEN			128
+
+/**
+ * Manufacturing block header length
+ */
+#define BFA_MFG_HDR_LEN				4
+
+/**
+ * Checksum size
+ */
+#define BFA_MFG_CHKSUM_SIZE			16
 
 /**
  * Manufacturing block format
@@ -30,29 +70,74 @@
 #define BFA_MFG_SERIALNUM_SIZE			11
 #define BFA_MFG_PARTNUM_SIZE			14
 #define BFA_MFG_SUPPLIER_ID_SIZE		10
-#define BFA_MFG_SUPPLIER_PARTNUM_SIZE	20
-#define BFA_MFG_SUPPLIER_SERIALNUM_SIZE	20
-#define BFA_MFG_SUPPLIER_REVISION_SIZE	4
+#define BFA_MFG_SUPPLIER_PARTNUM_SIZE		20
+#define BFA_MFG_SUPPLIER_SERIALNUM_SIZE		20
+#define BFA_MFG_SUPPLIER_REVISION_SIZE		4
 #define STRSZ(_n)	(((_n) + 4) & ~3)
 
 /**
+ * Manufacturing card type
+ */
+enum {
+	BFA_MFG_TYPE_CB_MAX  = 825,      /*  Crossbow card type max	*/
+	BFA_MFG_TYPE_FC8P2   = 825,      /*  8G 2port FC card		*/
+	BFA_MFG_TYPE_FC8P1   = 815,      /*  8G 1port FC card		*/
+	BFA_MFG_TYPE_FC4P2   = 425,      /*  4G 2port FC card		*/
+	BFA_MFG_TYPE_FC4P1   = 415,      /*  4G 1port FC card		*/
+	BFA_MFG_TYPE_CNA10P2 = 1020,     /*  10G 2port CNA card	*/
+	BFA_MFG_TYPE_CNA10P1 = 1010,     /*  10G 1port CNA card	*/
+};
+
+#pragma pack(1)
+
+/**
+ * Card type to port number conversion
+ */
+#define bfa_mfg_type2port_num(card_type) (((card_type) / 10) % 10)
+
+
+/**
+ * All numerical fields are in big-endian format.
+ */
+struct bfa_mfg_block_s {
+};
+
+/**
  * VPD data length
  */
-#define BFA_MFG_VPD_LEN     256
+#define BFA_MFG_VPD_LEN		512
+
+#define BFA_MFG_VPD_PCI_HDR_OFF		137
+#define BFA_MFG_VPD_PCI_VER_MASK	0x07	/*  version mask 3 bits */
+#define BFA_MFG_VPD_PCI_VDR_MASK	0xf8	/*  vendor mask 5 bits */
+
+/**
+ * VPD vendor tag
+ */
+enum {
+	BFA_MFG_VPD_UNKNOWN	= 0,     /*  vendor unknown 		*/
+	BFA_MFG_VPD_IBM 	= 1,     /*  vendor IBM 		*/
+	BFA_MFG_VPD_HP  	= 2,     /*  vendor HP  		*/
+	BFA_MFG_VPD_DELL        = 3,	 /*  vendor DELL                */
+	BFA_MFG_VPD_PCI_IBM 	= 0x08,  /*  PCI VPD IBM     		*/
+	BFA_MFG_VPD_PCI_HP  	= 0x10,  /*  PCI VPD HP			*/
+	BFA_MFG_VPD_PCI_DELL    = 0x20,  /*  PCI VPD DELL           	*/
+	BFA_MFG_VPD_PCI_BRCD 	= 0xf8,  /*  PCI VPD Brocade 		*/
+};
 
 /**
  * All numerical fields are in big-endian format.
  */
 struct bfa_mfg_vpd_s {
-    u8     version;    /*  vpd data version */
-    u8     vpd_sig[3]; /*  characters 'V', 'P', 'D' */
-    u8     chksum;     /*  u8 checksum */
-    u8     vendor;     /*  vendor */
-    u8     len;        /*  vpd data length excluding header */
-    u8     rsv;
-    u8     data[BFA_MFG_VPD_LEN];  /*  vpd data */
+	u8		version;	/*  vpd data version */
+	u8		vpd_sig[3];	/*  characters 'V', 'P', 'D' */
+	u8		chksum;		/*  u8 checksum */
+	u8		vendor;		/*  vendor */
+	u8 	len;		/*  vpd data length excluding header */
+	u8 	rsv;
+	u8		data[BFA_MFG_VPD_LEN];	/*  vpd data */
 };
 
-#pragma pack(1)
+#pragma pack()
 
 #endif /* __BFA_DEFS_MFG_H__ */
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_port.h b/drivers/scsi/bfa/include/defs/bfa_defs_port.h
index de0696c81bc4..501bc9739d9d 100644
--- a/drivers/scsi/bfa/include/defs/bfa_defs_port.h
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_port.h
@@ -185,6 +185,8 @@ struct bfa_port_attr_s {
 	wwn_t		fabric_name; /*  attached switch's nwwn */
 	u8		fabric_ip_addr[BFA_FCS_FABRIC_IPADDR_SZ]; /*  attached
 							* fabric's ip addr */
+	struct mac_s    fpma_mac;	/*  Lport's FPMA Mac address */
+	u16     authfail;		/*  auth failed state */
 };
 
 /**
@@ -232,14 +234,15 @@ enum bfa_port_aen_sfp_pom {
 };
 
 struct bfa_port_aen_data_s {
-	enum bfa_ioc_type_e ioc_type;
-	wwn_t           pwwn;	      /*  WWN of the physical port */
-	wwn_t           fwwn;	      /*  WWN of the fabric port */
-	mac_t           mac;	      /*  MAC addres of the ethernet port,
-				       * applicable to CNA port only */
-	int             phy_port_num; /*! For SFP related events */
-	enum bfa_port_aen_sfp_pom level; /*  Only transitions will
-					  * be informed */
+	wwn_t           pwwn;         /*  WWN of the physical port */
+	wwn_t           fwwn;         /*  WWN of the fabric port */
+	s32         phy_port_num; /*! For SFP related events */
+	s16         ioc_type;
+	s16         level;        /*  Only transitions will
+					* be informed */
+	struct mac_s    mac;          /*  MAC address of the ethernet port,
+					* applicable to CNA port only */
+	s16         rsvd;
 };
 
 #endif /* __BFA_DEFS_PORT_H__ */
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_pport.h b/drivers/scsi/bfa/include/defs/bfa_defs_pport.h
index bf320412ee24..26e5cc78095d 100644
--- a/drivers/scsi/bfa/include/defs/bfa_defs_pport.h
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_pport.h
@@ -232,7 +232,7 @@ struct bfa_pport_attr_s {
 	u32        	pid;		/*  port ID */
 	enum bfa_pport_type 	port_type;	/*  current topology */
 	u32        	loopback;	/*  external loopback */
-	u32		rsvd1;
+	u32		authfail;	/* auth fail state */
 	u32		rsvd2;		/*  padding for 64 bit */
 };
 
@@ -240,73 +240,79 @@ struct bfa_pport_attr_s {
  * 		FC Port statistics.
  */
 struct bfa_pport_fc_stats_s {
-	u64        secs_reset;	/*  seconds since stats is reset */
-	u64        tx_frames;	/*  transmitted frames */
-	u64        tx_words;	/*  transmitted words */
-	u64        rx_frames;	/*  received frames */
-	u64        rx_words;	/*  received words */
-	u64        lip_count;	/*  LIPs seen */
-	u64        nos_count;	/*  NOS count */
-	u64        error_frames;	/*  errored frames (sent?) */
-	u64        dropped_frames;	/*  dropped frames */
-	u64        link_failures;	/*  link failure count */
-	u64        loss_of_syncs;	/*  loss of sync count */
-	u64        loss_of_signals;/*  loss of signal count */
-	u64        primseq_errs;	/*  primitive sequence protocol */
-	u64        bad_os_count;	/*  invalid ordered set */
-	u64        err_enc_out;	/*  Encoding error outside frame */
-	u64        invalid_crcs;	/*  frames received with invalid CRC*/
-	u64	undersized_frm; /*  undersized frames */
-	u64	oversized_frm;	/*  oversized frames */
-	u64	bad_eof_frm;	/*  frames with bad EOF */
-	struct bfa_qos_stats_s	qos_stats;	/*  QoS statistics */
+	u64    secs_reset; /* Seconds since stats is reset     */
+	u64    tx_frames;  /* Tx frames                */
+	u64    tx_words;   /* Tx words                 */
+	u64    tx_lip;     /* TX LIP               */
+	u64    tx_nos;     /* Tx NOS               */
+	u64    tx_ols;     /* Tx OLS               */
+	u64    tx_lr;      /* Tx LR                */
+	u64    tx_lrr;     /* Tx LRR               */
+	u64    rx_frames;  /* Rx frames                */
+	u64    rx_words;   /* Rx words                 */
+	u64    lip_count;  /* Rx LIP                   */
+	u64    nos_count;  /* Rx NOS               */
+	u64    ols_count;  /* Rx OLS               */
+	u64    lr_count;   /* Rx LR                */
+	u64    lrr_count;  /* Rx LRR               */
+	u64    invalid_crcs;   /* Rx CRC err frames            */
+	u64    invalid_crc_gd_eof; /* Rx CRC err good EOF frames   */
+	u64    undersized_frm; /* Rx undersized frames         */
+	u64    oversized_frm;  /* Rx oversized frames          */
+	u64    bad_eof_frm;    /* Rx frames with bad EOF       */
+	u64    error_frames;   /* Errored frames           */
+	u64    dropped_frames; /* Dropped frames           */
+	u64    link_failures;  /* Link Failure (LF) count          */
+	u64    loss_of_syncs;  /* Loss of sync count           */
+	u64    loss_of_signals;/* Loss of signal count         */
+	u64    primseq_errs;   /* Primitive sequence protocol err. */
+	u64    bad_os_count;   /* Invalid ordered sets         */
+	u64    err_enc_out;    /* Encoding err nonframe_8b10b      */
+	u64    err_enc;    /* Encoding err frame_8b10b         */
 };
 
 /**
  * 		Eth Port statistics.
  */
 struct bfa_pport_eth_stats_s {
-	u64	secs_reset;	/*  seconds since stats is reset */
-	u64	frame_64;      /*  both rx and tx counter */
-	u64	frame_65_127;      /* both rx and tx counter */
-	u64	frame_128_255;     /* both rx and tx counter */
-	u64	frame_256_511;     /* both rx and tx counter */
-	u64	frame_512_1023;    /* both rx and tx counter */
-	u64	frame_1024_1518;   /* both rx and tx counter */
-	u64	frame_1519_1522;   /* both rx and tx counter */
-
-	u64	tx_bytes;
-	u64	tx_packets;
-	u64	tx_mcast_packets;
-	u64	tx_bcast_packets;
-	u64	tx_control_frame;
-	u64	tx_drop;
-	u64	tx_jabber;
-	u64	tx_fcs_error;
-	u64	tx_fragments;
-
-	u64	rx_bytes;
-	u64	rx_packets;
-	u64	rx_mcast_packets;
-	u64	rx_bcast_packets;
-	u64	rx_control_frames;
-	u64	rx_unknown_opcode;
-	u64	rx_drop;
-	u64	rx_jabber;
-	u64	rx_fcs_error;
-	u64	rx_alignment_error;
-	u64	rx_frame_length_error;
-	u64	rx_code_error;
-	u64	rx_fragments;
-
-	u64	rx_pause; /* BPC */
-	u64	rx_zero_pause; /*  BPC Pause cancellation */
-	u64	tx_pause;      /* BPC */
-	u64	tx_zero_pause; /*  BPC Pause cancellation */
-	u64	rx_fcoe_pause; /* BPC */
-	u64	rx_fcoe_zero_pause; /*  BPC Pause cancellation */
-	u64	tx_fcoe_pause;      /* BPC */
-	u64	tx_fcoe_zero_pause; /*  BPC Pause cancellation */
+	u64    secs_reset;   /* Seconds since stats is reset   */
+	u64    frame_64;     /* Frames 64 bytes            */
+	u64    frame_65_127;     /* Frames 65-127 bytes        */
+	u64    frame_128_255;    /* Frames 128-255 bytes       */
+	u64    frame_256_511;    /* Frames 256-511 bytes       */
+	u64    frame_512_1023;   /* Frames 512-1023 bytes          */
+	u64    frame_1024_1518;  /* Frames 1024-1518 bytes         */
+	u64    frame_1519_1522;  /* Frames 1519-1522 bytes         */
+	u64    tx_bytes;     /* Tx bytes               */
+	u64    tx_packets;   /* Tx packets             */
+	u64    tx_mcast_packets; /* Tx multicast packets       */
+	u64    tx_bcast_packets; /* Tx broadcast packets       */
+	u64    tx_control_frame; /* Tx control frame           */
+	u64    tx_drop;      /* Tx drops               */
+	u64    tx_jabber;    /* Tx jabber              */
+	u64    tx_fcs_error;     /* Tx FCS error           */
+	u64    tx_fragments;     /* Tx fragments           */
+	u64    rx_bytes;     /* Rx bytes               */
+	u64    rx_packets;   /* Rx packets             */
+	u64    rx_mcast_packets; /* Rx multicast packets       */
+	u64    rx_bcast_packets; /* Rx broadcast packets       */
+	u64    rx_control_frames; /* Rx control frames         */
+	u64    rx_unknown_opcode; /* Rx unknown opcode         */
+	u64    rx_drop;      /* Rx drops               */
+	u64    rx_jabber;    /* Rx jabber              */
+	u64    rx_fcs_error;     /* Rx FCS errors              */
+	u64    rx_alignment_error; /* Rx alignment errors          */
+	u64    rx_frame_length_error; /* Rx frame len errors       */
+	u64    rx_code_error;    /* Rx code errors             */
+	u64    rx_fragments;     /* Rx fragments           */
+	u64    rx_pause;     /* Rx pause               */
+	u64    rx_zero_pause;    /* Rx zero pause              */
+	u64    tx_pause;     /* Tx pause               */
+	u64    tx_zero_pause;    /* Tx zero pause              */
+	u64    rx_fcoe_pause;    /* Rx fcoe pause              */
+	u64    rx_fcoe_zero_pause; /* Rx FCoE zero pause       */
+	u64    tx_fcoe_pause;    /* Tx FCoE pause              */
+	u64    tx_fcoe_zero_pause; /* Tx FCoE zero pause       */
 };
 
 /**
@@ -333,8 +339,7 @@ struct bfa_pport_fcpmap_s {
 };
 
 /**
- *              Port RNID info.
- */
+ *              Port RNI	 */
 struct bfa_pport_rnid_s {
 	wwn_t             wwn;
 	u32          unittype;
@@ -347,6 +352,23 @@ struct bfa_pport_rnid_s {
 	u16          topologydiscoveryflags;
 };
 
+struct bfa_fcport_fcf_s {
+	wwn_t           name;           /* FCF name                 */
+	wwn_t           fabric_name;    /* Fabric Name              */
+	u8		fipenabled;     /* FIP enabled or not       */
+	u8		fipfailed;      /* FIP failed or not        */
+	u8         	resv[2];
+	u8         	pri;            /* FCF priority             */
+	u8         	version;        /* FIP version used         */
+	u8         	available;      /* Available  for  login    */
+	u8         	fka_disabled;   /* FKA is disabled          */
+	u8         	maxsz_verified; /* FCoE max size verified   */
+	u8         	fc_map[3];      /* FC map                   */
+	u16		vlan;           /* FCoE vlan tag/priority   */
+	u32        	fka_adv_per;    /* FIP  ka advert. period   */
+	struct mac_s	mac;            /* FCF mac                  */
+};
+
 /**
  * 		Link state information
  */
@@ -378,6 +400,7 @@ struct bfa_pport_link_s {
 			struct fc_alpabm_s     alpabm;	   /*  alpa bitmap */
 		} loop_info;
 	} tl;
+	struct bfa_fcport_fcf_s fcf;    /*!< FCF information (for FCoE) */
 };
 
 #endif /* __BFA_DEFS_PPORT_H__ */
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_status.h b/drivers/scsi/bfa/include/defs/bfa_defs_status.h
index cdceaeb9f4b8..4374494bd566 100644
--- a/drivers/scsi/bfa/include/defs/bfa_defs_status.h
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_status.h
@@ -180,8 +180,8 @@ enum bfa_status {
 	BFA_STATUS_IM_ADAPT_ALREADY_IN_TEAM = 114, /*  Given adapter is part
 						    * of another team */
 	BFA_STATUS_IM_ADAPT_HAS_VLANS = 115, /*  Adapter has VLANs configured.
-					      * Delete all VLANs before
-					      * creating team */
+					      * Delete all VLANs to become
+					      * part of the team */
 	BFA_STATUS_IM_PVID_MISMATCH = 116, /*  Mismatching PVIDs configured
 					    * for adapters */
 	BFA_STATUS_IM_LINK_SPEED_MISMATCH = 117, /*  Mismatching link speeds
@@ -213,7 +213,7 @@ enum bfa_status {
 					     * loaded */
 	BFA_STATUS_CARD_TYPE_MISMATCH = 131, /*  Card type mismatch */
 	BFA_STATUS_BAD_ASICBLK = 132, /*  Bad ASIC block */
-	BFA_STATUS_NO_DRIVER = 133, /*  Storage/Ethernet driver not loaded */
+	BFA_STATUS_NO_DRIVER = 133, /*  Brocade adapter/driver not installed or loaded */
 	BFA_STATUS_INVALID_MAC = 134, /*  Invalid mac address */
 	BFA_STATUS_IM_NO_VLAN = 135, /*  No VLANs configured on the adapter */
 	BFA_STATUS_IM_ETH_LB_FAILED = 136, /*  Ethernet loopback test failed */
@@ -228,8 +228,7 @@ enum bfa_status {
 	BFA_STATUS_IM_GET_INETCFG_FAILED = 142, /*  Acquiring Network Subsytem
 						 * handle Failed. Please try
 						 * after some time */
-	BFA_STATUS_IM_NOT_BOUND = 143, /*  Brocade 10G Ethernet Service is not
-					* Enabled on this port */
+	BFA_STATUS_IM_NOT_BOUND = 143, /*  IM driver is not active */
 	BFA_STATUS_INSUFFICIENT_PERMS = 144, /*  User doesn't have sufficient
 					      * permissions to execute the BCU
 					      * application */
@@ -242,6 +241,14 @@ enum bfa_status {
 					  * failed */
 	BFA_STATUS_IM_UNBIND_FAILED = 149, /* ! < IM Driver unbind operation
 					    * failed */
+	BFA_STATUS_IM_PORT_IN_TEAM = 150, /*  Port is already part of the
+					   * team */
+	BFA_STATUS_IM_VLAN_NOT_FOUND = 151, /*  VLAN ID doesn't exists */
+	BFA_STATUS_IM_TEAM_NOT_FOUND = 152, /*  Teaming configuration doesn't
+					     * exists */
+	BFA_STATUS_IM_TEAM_CFG_NOT_ALLOWED = 153, /*  Given settings are not
+						* allowed for the current
+						* Teaming mode */
 	BFA_STATUS_MAX_VAL		/*  Unknown error code */
 };
 #define bfa_status_t enum bfa_status
diff --git a/drivers/scsi/bfa/include/fcb/bfa_fcb_fcpim.h b/drivers/scsi/bfa/include/fcb/bfa_fcb_fcpim.h
index a6c70aee0aa3..52585d3dd891 100644
--- a/drivers/scsi/bfa/include/fcb/bfa_fcb_fcpim.h
+++ b/drivers/scsi/bfa/include/fcb/bfa_fcb_fcpim.h
@@ -70,7 +70,6 @@ void            bfa_fcb_itnim_online(struct bfad_itnim_s *itnim_drv);
  */
 void            bfa_fcb_itnim_offline(struct bfad_itnim_s *itnim_drv);
 
-void            bfa_fcb_itnim_tov_begin(struct bfad_itnim_s *itnim_drv);
 void            bfa_fcb_itnim_tov(struct bfad_itnim_s *itnim_drv);
 
 #endif /* __BFAD_FCB_FCPIM_H__ */
diff --git a/drivers/scsi/bfa/include/fcs/bfa_fcs.h b/drivers/scsi/bfa/include/fcs/bfa_fcs.h
index 627669c65546..f2fd35fdee28 100644
--- a/drivers/scsi/bfa/include/fcs/bfa_fcs.h
+++ b/drivers/scsi/bfa/include/fcs/bfa_fcs.h
@@ -49,6 +49,7 @@ struct bfa_fcs_s {
 	struct bfa_trc_mod_s  *trcmod;	/*  tracing module */
 	struct bfa_aen_s      *aen;	/*  aen component */
 	bfa_boolean_t   vf_enabled;	/*  VF mode is enabled */
+	bfa_boolean_t   fdmi_enabled;   /*!< FDMI is enabled */
 	bfa_boolean_t min_cfg;		/* min cfg enabled/disabled */
 	u16        port_vfid;	/*  port default VF ID */
 	struct bfa_fcs_driver_info_s driver_info;
@@ -60,10 +61,12 @@ struct bfa_fcs_s {
 /*
  * bfa fcs API functions
  */
-void bfa_fcs_init(struct bfa_fcs_s *fcs, struct bfa_s *bfa, struct bfad_s *bfad,
+void bfa_fcs_attach(struct bfa_fcs_s *fcs, struct bfa_s *bfa, struct bfad_s *bfad,
 			bfa_boolean_t min_cfg);
+void bfa_fcs_init(struct bfa_fcs_s *fcs);
 void bfa_fcs_driver_info_init(struct bfa_fcs_s *fcs,
 			struct bfa_fcs_driver_info_s *driver_info);
+void bfa_fcs_set_fdmi_param(struct bfa_fcs_s *fcs, bfa_boolean_t fdmi_enable);
 void bfa_fcs_exit(struct bfa_fcs_s *fcs);
 void bfa_fcs_trc_init(struct bfa_fcs_s *fcs, struct bfa_trc_mod_s *trcmod);
 void bfa_fcs_log_init(struct bfa_fcs_s *fcs, struct bfa_log_mod_s *logmod);
diff --git a/drivers/scsi/bfa/include/fcs/bfa_fcs_lport.h b/drivers/scsi/bfa/include/fcs/bfa_fcs_lport.h
index 967ceb0eb074..ceaefd3060f4 100644
--- a/drivers/scsi/bfa/include/fcs/bfa_fcs_lport.h
+++ b/drivers/scsi/bfa/include/fcs/bfa_fcs_lport.h
@@ -34,14 +34,6 @@ struct bfa_fcs_s;
 struct bfa_fcs_fabric_s;
 
 /*
-* @todo : need to move to a global config file.
- * Maximum Vports supported per physical port or vf.
- */
-#define BFA_FCS_MAX_VPORTS_SUPP_CB  255
-#define BFA_FCS_MAX_VPORTS_SUPP_CT  191
-
-/*
-* @todo : need to move to a global config file.
  * Maximum Rports supported per port (physical/logical).
  */
 #define BFA_FCS_MAX_RPORTS_SUPP  256	/* @todo : tentative value */
diff --git a/drivers/scsi/bfa/include/log/bfa_log_hal.h b/drivers/scsi/bfa/include/log/bfa_log_hal.h
index 0412aea2ec30..5f8f5e30b9e8 100644
--- a/drivers/scsi/bfa/include/log/bfa_log_hal.h
+++ b/drivers/scsi/bfa/include/log/bfa_log_hal.h
@@ -27,4 +27,10 @@
 	(((u32) BFA_LOG_HAL_ID << BFA_LOG_MODID_OFFSET) | 3)
 #define BFA_LOG_HAL_SM_ASSERT \
 	(((u32) BFA_LOG_HAL_ID << BFA_LOG_MODID_OFFSET) | 4)
+#define BFA_LOG_HAL_DRIVER_ERROR \
+	(((u32) BFA_LOG_HAL_ID << BFA_LOG_MODID_OFFSET) | 5)
+#define BFA_LOG_HAL_DRIVER_CONFIG_ERROR \
+	(((u32) BFA_LOG_HAL_ID << BFA_LOG_MODID_OFFSET) | 6)
+#define BFA_LOG_HAL_MBOX_ERROR \
+	(((u32) BFA_LOG_HAL_ID << BFA_LOG_MODID_OFFSET) | 7)
 #endif
diff --git a/drivers/scsi/bfa/include/log/bfa_log_linux.h b/drivers/scsi/bfa/include/log/bfa_log_linux.h
index 317c0547ee16..bd451db4c30a 100644
--- a/drivers/scsi/bfa/include/log/bfa_log_linux.h
+++ b/drivers/scsi/bfa/include/log/bfa_log_linux.h
@@ -41,4 +41,20 @@
 		(((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 10)
 #define BFA_LOG_LINUX_SCSI_ABORT_COMP \
 		(((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 11)
+#define BFA_LOG_LINUX_DRIVER_CONFIG_ERROR \
+		(((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 12)
+#define BFA_LOG_LINUX_BNA_STATE_MACHINE \
+		(((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 13)
+#define BFA_LOG_LINUX_IOC_ERROR \
+	(((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 14)
+#define BFA_LOG_LINUX_RESOURCE_ALLOC_ERROR \
+	(((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 15)
+#define BFA_LOG_LINUX_RING_BUFFER_ERROR \
+	(((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 16)
+#define BFA_LOG_LINUX_DRIVER_ERROR \
+	(((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 17)
+#define BFA_LOG_LINUX_DRIVER_DIAG \
+	(((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 18)
+#define BFA_LOG_LINUX_DRIVER_AEN \
+	(((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 19)
 #endif
diff --git a/drivers/scsi/bfa/include/protocol/fc.h b/drivers/scsi/bfa/include/protocol/fc.h
index 14969eecf6a9..8d1038035a76 100644
--- a/drivers/scsi/bfa/include/protocol/fc.h
+++ b/drivers/scsi/bfa/include/protocol/fc.h
@@ -50,6 +50,11 @@ struct fchs_s {
 
 	u32        ro;		/* relative offset */
 };
+
+#define FC_SOF_LEN      4
+#define FC_EOF_LEN      4
+#define FC_CRC_LEN      4
+
 /*
  * Fibre Channel BB_E Header Structure
  */
diff --git a/drivers/scsi/bfa/include/protocol/pcifw.h b/drivers/scsi/bfa/include/protocol/pcifw.h
deleted file mode 100644
index 6830dc3ee58a..000000000000
--- a/drivers/scsi/bfa/include/protocol/pcifw.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- */
-
-/**
- *  pcifw.h PCI FW related headers
- */
-
-#ifndef __PCIFW_H__
-#define __PCIFW_H__
-
-#pragma pack(1)
-
-struct pnp_hdr_s{
-  u32	signature;	/* "$PnP" */
-  u8	rev;		/* Struct revision */
-  u8 	len;		/* Header structure len in multiples
-				 * of 16 bytes */
-  u16  off;		/* Offset to next header 00 if none */
-  u8	rsvd;		/* Reserved byte */
-  u8	cksum;		/* 8-bit checksum for this header */
-  u32	pnp_dev_id;	/* PnP Device Id */
-  u16  mfstr;		/* Pointer to manufacturer string */
-  u16	prstr;		/* Pointer to product string */
-  u8	devtype[3];	/* Device Type Code */
-  u8	devind;		/* Device Indicator */
-  u16	bcventr;	/* Bootstrap entry vector */
-  u16	rsvd2;		/* Reserved */
-  u16  sriv;		/* Static resource information vector */
-};
-
-struct pci_3_0_ds_s{
- u32	sig;   		/* Signature "PCIR" */
- u16	vendid;		/* Vendor ID */
- u16	devid;		/* Device ID */
- u16	devlistoff;	/* Device List Offset */
- u16	len;		/* PCI Data Structure Length */
- u8	rev;		/* PCI Data Structure Revision */
- u8	clcode[3];	/* Class Code */
- u16	imglen;		/* Code image length in multiples of
-				 * 512 bytes */
- u16	coderev;	/* Revision level of code/data */
- u8	codetype;	/* Code type 0x00 - BIOS */
- u8	indr;		/* Last image indicator */
- u16	mrtimglen;	/* Max Run Time Image Length */
- u16	cuoff;		/* Config Utility Code Header Offset */
- u16	dmtfclp;	/* DMTF CLP entry point offset */
-};
-
-struct pci_optrom_hdr_s{
- u16	sig;		/* Signature 0x55AA */
- u8	len;		/* Option ROM length in units of 512 bytes */
- u8	inivec[3];	/* Initialization vector */
- u8	rsvd[16];	/* Reserved field */
- u16	verptr;		/* Pointer to version string - private */
- u16	pcids;		/* Pointer to PCI data structure */
- u16	pnphdr;		/* Pointer to PnP expansion header */
-};
-
-#pragma pack()
-
-#endif
diff --git a/drivers/scsi/bfa/loop.c b/drivers/scsi/bfa/loop.c
index f7c7f4f3c640..f6342efb6a90 100644
--- a/drivers/scsi/bfa/loop.c
+++ b/drivers/scsi/bfa/loop.c
@@ -162,7 +162,7 @@ bfa_fcs_port_loop_send_plogi(struct bfa_fcs_port_s *port, u8 alpa)
 	len = fc_plogi_build(&fchs, bfa_fcxp_get_reqbuf(fcxp), alpa,
 			     bfa_fcs_port_get_fcid(port), 0,
 			     port->port_cfg.pwwn, port->port_cfg.nwwn,
-				 bfa_pport_get_maxfrsize(port->fcs->bfa));
+				 bfa_fcport_get_maxfrsize(port->fcs->bfa));
 
 	bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
 			  FC_CLASS_3, len, &fchs,
diff --git a/drivers/scsi/bfa/lport_api.c b/drivers/scsi/bfa/lport_api.c
index 1e06792cd4c2..d3907d184e2b 100644
--- a/drivers/scsi/bfa/lport_api.c
+++ b/drivers/scsi/bfa/lport_api.c
@@ -156,7 +156,7 @@ bfa_fcs_port_get_rport_max_speed(struct bfa_fcs_port_s *port)
 	/*
 	 * Get Physical port's current speed
 	 */
-	bfa_pport_get_attr(port->fcs->bfa, &pport_attr);
+	bfa_fcport_get_attr(port->fcs->bfa, &pport_attr);
 	pport_speed = pport_attr.speed;
 	bfa_trc(fcs, pport_speed);
 
@@ -235,7 +235,8 @@ bfa_fcs_port_get_info(struct bfa_fcs_port_s *port,
 		port_info->port_wwn = bfa_fcs_port_get_pwwn(port);
 		port_info->node_wwn = bfa_fcs_port_get_nwwn(port);
 
-		port_info->max_vports_supp = bfa_fcs_vport_get_max(port->fcs);
+		port_info->max_vports_supp =
+			bfa_lps_get_max_vport(port->fcs->bfa);
 		port_info->num_vports_inuse =
 			bfa_fcs_fabric_vport_count(port->fabric);
 		port_info->max_rports_supp = BFA_FCS_MAX_RPORTS_SUPP;
diff --git a/drivers/scsi/bfa/ms.c b/drivers/scsi/bfa/ms.c
index c96b3ca007ae..5e8c8dee6c97 100644
--- a/drivers/scsi/bfa/ms.c
+++ b/drivers/scsi/bfa/ms.c
@@ -118,7 +118,7 @@ bfa_fcs_port_ms_sm_offline(struct bfa_fcs_port_ms_s *ms,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(ms->port->fcs, event);
 	}
 }
 
@@ -141,7 +141,7 @@ bfa_fcs_port_ms_sm_plogi_sending(struct bfa_fcs_port_ms_s *ms,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(ms->port->fcs, event);
 	}
 }
 
@@ -190,7 +190,7 @@ bfa_fcs_port_ms_sm_plogi(struct bfa_fcs_port_ms_s *ms, enum port_ms_event event)
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(ms->port->fcs, event);
 	}
 }
 
@@ -216,7 +216,7 @@ bfa_fcs_port_ms_sm_plogi_retry(struct bfa_fcs_port_ms_s *ms,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(ms->port->fcs, event);
 	}
 }
 
@@ -230,10 +230,6 @@ bfa_fcs_port_ms_sm_online(struct bfa_fcs_port_ms_s *ms,
 	switch (event) {
 	case MSSM_EVENT_PORT_OFFLINE:
 		bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_offline);
-		/*
-		 * now invoke MS related sub-modules
-		 */
-		bfa_fcs_port_fdmi_offline(ms);
 		break;
 
 	case MSSM_EVENT_PORT_FABRIC_RSCN:
@@ -243,7 +239,7 @@ bfa_fcs_port_ms_sm_online(struct bfa_fcs_port_ms_s *ms,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(ms->port->fcs, event);
 	}
 }
 
@@ -266,7 +262,7 @@ bfa_fcs_port_ms_sm_gmal_sending(struct bfa_fcs_port_ms_s *ms,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(ms->port->fcs, event);
 	}
 }
 
@@ -304,7 +300,7 @@ bfa_fcs_port_ms_sm_gmal(struct bfa_fcs_port_ms_s *ms, enum port_ms_event event)
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(ms->port->fcs, event);
 	}
 }
 
@@ -330,7 +326,7 @@ bfa_fcs_port_ms_sm_gmal_retry(struct bfa_fcs_port_ms_s *ms,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(ms->port->fcs, event);
 	}
 }
 
@@ -466,7 +462,7 @@ bfa_fcs_port_ms_sm_gfn_sending(struct bfa_fcs_port_ms_s *ms,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(ms->port->fcs, event);
 	}
 }
 
@@ -502,7 +498,7 @@ bfa_fcs_port_ms_sm_gfn(struct bfa_fcs_port_ms_s *ms, enum port_ms_event event)
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(ms->port->fcs, event);
 	}
 }
 
@@ -528,7 +524,7 @@ bfa_fcs_port_ms_sm_gfn_retry(struct bfa_fcs_port_ms_s *ms,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(ms->port->fcs, event);
 	}
 }
 
@@ -637,7 +633,7 @@ bfa_fcs_port_ms_send_plogi(void *ms_cbarg, struct bfa_fcxp_s *fcxp_alloced)
 			     bfa_os_hton3b(FC_MGMT_SERVER),
 			     bfa_fcs_port_get_fcid(port), 0,
 			     port->port_cfg.pwwn, port->port_cfg.nwwn,
-			     bfa_pport_get_maxfrsize(port->fcs->bfa));
+			     bfa_fcport_get_maxfrsize(port->fcs->bfa));
 
 	bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
 		      FC_CLASS_3, len, &fchs, bfa_fcs_port_ms_plogi_response,
@@ -735,6 +731,7 @@ bfa_fcs_port_ms_offline(struct bfa_fcs_port_s *port)
 
 	ms->port = port;
 	bfa_sm_send_event(ms, MSSM_EVENT_PORT_OFFLINE);
+	bfa_fcs_port_fdmi_offline(ms);
 }
 
 void
diff --git a/drivers/scsi/bfa/ns.c b/drivers/scsi/bfa/ns.c
index 2f8b880060bb..d20dd7e15742 100644
--- a/drivers/scsi/bfa/ns.c
+++ b/drivers/scsi/bfa/ns.c
@@ -164,7 +164,7 @@ bfa_fcs_port_ns_sm_offline(struct bfa_fcs_port_ns_s *ns,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(ns->port->fcs, event);
 	}
 }
 
@@ -187,7 +187,7 @@ bfa_fcs_port_ns_sm_plogi_sending(struct bfa_fcs_port_ns_s *ns,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(ns->port->fcs, event);
 	}
 }
 
@@ -221,7 +221,7 @@ bfa_fcs_port_ns_sm_plogi(struct bfa_fcs_port_ns_s *ns,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(ns->port->fcs, event);
 	}
 }
 
@@ -247,7 +247,7 @@ bfa_fcs_port_ns_sm_plogi_retry(struct bfa_fcs_port_ns_s *ns,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(ns->port->fcs, event);
 	}
 }
 
@@ -270,7 +270,7 @@ bfa_fcs_port_ns_sm_sending_rspn_id(struct bfa_fcs_port_ns_s *ns,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(ns->port->fcs, event);
 	}
 }
 
@@ -304,7 +304,7 @@ bfa_fcs_port_ns_sm_rspn_id(struct bfa_fcs_port_ns_s *ns,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(ns->port->fcs, event);
 	}
 }
 
@@ -330,7 +330,7 @@ bfa_fcs_port_ns_sm_rspn_id_retry(struct bfa_fcs_port_ns_s *ns,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(ns->port->fcs, event);
 	}
 }
 
@@ -353,7 +353,7 @@ bfa_fcs_port_ns_sm_sending_rft_id(struct bfa_fcs_port_ns_s *ns,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(ns->port->fcs, event);
 	}
 }
 
@@ -390,7 +390,7 @@ bfa_fcs_port_ns_sm_rft_id(struct bfa_fcs_port_ns_s *ns,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(ns->port->fcs, event);
 	}
 }
 
@@ -413,7 +413,7 @@ bfa_fcs_port_ns_sm_rft_id_retry(struct bfa_fcs_port_ns_s *ns,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(ns->port->fcs, event);
 	}
 }
 
@@ -436,7 +436,7 @@ bfa_fcs_port_ns_sm_sending_rff_id(struct bfa_fcs_port_ns_s *ns,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(ns->port->fcs, event);
 	}
 }
 
@@ -494,7 +494,7 @@ bfa_fcs_port_ns_sm_rff_id(struct bfa_fcs_port_ns_s *ns,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(ns->port->fcs, event);
 	}
 }
 
@@ -517,7 +517,7 @@ bfa_fcs_port_ns_sm_rff_id_retry(struct bfa_fcs_port_ns_s *ns,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(ns->port->fcs, event);
 	}
 }
 static void
@@ -539,7 +539,7 @@ bfa_fcs_port_ns_sm_sending_gid_ft(struct bfa_fcs_port_ns_s *ns,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(ns->port->fcs, event);
 	}
 }
 
@@ -575,7 +575,7 @@ bfa_fcs_port_ns_sm_gid_ft(struct bfa_fcs_port_ns_s *ns,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(ns->port->fcs, event);
 	}
 }
 
@@ -598,7 +598,7 @@ bfa_fcs_port_ns_sm_gid_ft_retry(struct bfa_fcs_port_ns_s *ns,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(ns->port->fcs, event);
 	}
 }
 
@@ -626,7 +626,7 @@ bfa_fcs_port_ns_sm_online(struct bfa_fcs_port_ns_s *ns,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(ns->port->fcs, event);
 	}
 }
 
@@ -660,7 +660,7 @@ bfa_fcs_port_ns_send_plogi(void *ns_cbarg, struct bfa_fcxp_s *fcxp_alloced)
 			     bfa_os_hton3b(FC_NAME_SERVER),
 			     bfa_fcs_port_get_fcid(port), 0,
 			     port->port_cfg.pwwn, port->port_cfg.nwwn,
-			     bfa_pport_get_maxfrsize(port->fcs->bfa));
+			     bfa_fcport_get_maxfrsize(port->fcs->bfa));
 
 	bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
 		      FC_CLASS_3, len, &fchs, bfa_fcs_port_ns_plogi_response,
diff --git a/drivers/scsi/bfa/rport.c b/drivers/scsi/bfa/rport.c
index 9cf58bb138dc..8e73dd9a625a 100644
--- a/drivers/scsi/bfa/rport.c
+++ b/drivers/scsi/bfa/rport.c
@@ -224,7 +224,7 @@ bfa_fcs_rport_sm_uninit(struct bfa_fcs_rport_s *rport, enum rport_event event)
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(rport->fcs, event);
 	}
 }
 
@@ -276,7 +276,7 @@ bfa_fcs_rport_sm_plogi_sending(struct bfa_fcs_rport_s *rport,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(rport->fcs, event);
 	}
 }
 
@@ -332,7 +332,7 @@ bfa_fcs_rport_sm_plogiacc_sending(struct bfa_fcs_rport_s *rport,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(rport->fcs, event);
 	}
 }
 
@@ -406,7 +406,7 @@ bfa_fcs_rport_sm_plogi_retry(struct bfa_fcs_rport_s *rport,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(rport->fcs, event);
 	}
 }
 
@@ -481,7 +481,7 @@ bfa_fcs_rport_sm_plogi(struct bfa_fcs_rport_s *rport, enum rport_event event)
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(rport->fcs, event);
 	}
 }
 
@@ -534,7 +534,7 @@ bfa_fcs_rport_sm_hal_online(struct bfa_fcs_rport_s *rport,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(rport->fcs, event);
 	}
 }
 
@@ -589,7 +589,7 @@ bfa_fcs_rport_sm_online(struct bfa_fcs_rport_s *rport, enum rport_event event)
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(rport->fcs, event);
 	}
 }
 
@@ -646,7 +646,7 @@ bfa_fcs_rport_sm_nsquery_sending(struct bfa_fcs_rport_s *rport,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(rport->fcs, event);
 	}
 }
 
@@ -704,7 +704,7 @@ bfa_fcs_rport_sm_nsquery(struct bfa_fcs_rport_s *rport, enum rport_event event)
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(rport->fcs, event);
 	}
 }
 
@@ -754,7 +754,7 @@ bfa_fcs_rport_sm_adisc_sending(struct bfa_fcs_rport_s *rport,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(rport->fcs, event);
 	}
 }
 
@@ -816,7 +816,7 @@ bfa_fcs_rport_sm_adisc(struct bfa_fcs_rport_s *rport, enum rport_event event)
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(rport->fcs, event);
 	}
 }
 
@@ -846,7 +846,7 @@ bfa_fcs_rport_sm_fc4_logorcv(struct bfa_fcs_rport_s *rport,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(rport->fcs, event);
 	}
 }
 
@@ -869,7 +869,7 @@ bfa_fcs_rport_sm_fc4_logosend(struct bfa_fcs_rport_s *rport,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(rport->fcs, event);
 	}
 }
 
@@ -905,7 +905,7 @@ bfa_fcs_rport_sm_fc4_offline(struct bfa_fcs_rport_s *rport,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(rport->fcs, event);
 	}
 }
 
@@ -925,10 +925,17 @@ bfa_fcs_rport_sm_hcb_offline(struct bfa_fcs_rport_s *rport,
 	case RPSM_EVENT_HCB_OFFLINE:
 	case RPSM_EVENT_ADDRESS_CHANGE:
 		if (bfa_fcs_port_is_online(rport->port)) {
-			bfa_sm_set_state(rport,
-					 bfa_fcs_rport_sm_nsdisc_sending);
-			rport->ns_retries = 0;
-			bfa_fcs_rport_send_gidpn(rport, NULL);
+			if (bfa_fcs_fabric_is_switched(rport->port->fabric)) {
+				bfa_sm_set_state(rport,
+					bfa_fcs_rport_sm_nsdisc_sending);
+				rport->ns_retries = 0;
+				bfa_fcs_rport_send_gidpn(rport, NULL);
+			} else {
+				bfa_sm_set_state(rport,
+					bfa_fcs_rport_sm_plogi_sending);
+				rport->plogi_retries = 0;
+				bfa_fcs_rport_send_plogi(rport, NULL);
+			}
 		} else {
 			rport->pid = 0;
 			bfa_sm_set_state(rport, bfa_fcs_rport_sm_offline);
@@ -951,7 +958,7 @@ bfa_fcs_rport_sm_hcb_offline(struct bfa_fcs_rport_s *rport,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(rport->fcs, event);
 	}
 }
 
@@ -1011,7 +1018,7 @@ bfa_fcs_rport_sm_hcb_logorcv(struct bfa_fcs_rport_s *rport,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(rport->fcs, event);
 	}
 }
 
@@ -1038,7 +1045,7 @@ bfa_fcs_rport_sm_hcb_logosend(struct bfa_fcs_rport_s *rport,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(rport->fcs, event);
 	}
 }
 
@@ -1073,7 +1080,7 @@ bfa_fcs_rport_sm_logo_sending(struct bfa_fcs_rport_s *rport,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(rport->fcs, event);
 	}
 }
 
@@ -1132,7 +1139,7 @@ bfa_fcs_rport_sm_offline(struct bfa_fcs_rport_s *rport, enum rport_event event)
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(rport->fcs, event);
 	}
 }
 
@@ -1188,7 +1195,7 @@ bfa_fcs_rport_sm_nsdisc_sending(struct bfa_fcs_rport_s *rport,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(rport->fcs, event);
 	}
 }
 
@@ -1249,7 +1256,7 @@ bfa_fcs_rport_sm_nsdisc_retry(struct bfa_fcs_rport_s *rport,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(rport->fcs, event);
 	}
 }
 
@@ -1334,7 +1341,7 @@ bfa_fcs_rport_sm_nsdisc_sent(struct bfa_fcs_rport_s *rport,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(rport->fcs, event);
 	}
 }
 
@@ -1366,7 +1373,7 @@ bfa_fcs_rport_send_plogi(void *rport_cbarg, struct bfa_fcxp_s *fcxp_alloced)
 	len = fc_plogi_build(&fchs, bfa_fcxp_get_reqbuf(fcxp), rport->pid,
 			     bfa_fcs_port_get_fcid(port), 0,
 			     port->port_cfg.pwwn, port->port_cfg.nwwn,
-			     bfa_pport_get_maxfrsize(port->fcs->bfa));
+			     bfa_fcport_get_maxfrsize(port->fcs->bfa));
 
 	bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
 		      FC_CLASS_3, len, &fchs, bfa_fcs_rport_plogi_response,
@@ -1478,7 +1485,7 @@ bfa_fcs_rport_send_plogiacc(void *rport_cbarg, struct bfa_fcxp_s *fcxp_alloced)
 	len = fc_plogi_acc_build(&fchs, bfa_fcxp_get_reqbuf(fcxp), rport->pid,
 				 bfa_fcs_port_get_fcid(port), rport->reply_oxid,
 				 port->port_cfg.pwwn, port->port_cfg.nwwn,
-				 bfa_pport_get_maxfrsize(port->fcs->bfa));
+				 bfa_fcport_get_maxfrsize(port->fcs->bfa));
 
 	bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
 		      FC_CLASS_3, len, &fchs, NULL, NULL, FC_MAX_PDUSZ, 0);
@@ -1813,7 +1820,7 @@ bfa_fcs_rport_process_rpsc(struct bfa_fcs_rport_s *rport,
 	/*
 	 * get curent speed from pport attributes from BFA
 	 */
-	bfa_pport_get_attr(port->fcs->bfa, &pport_attr);
+	bfa_fcport_get_attr(port->fcs->bfa, &pport_attr);
 
 	speeds.port_op_speed = fc_bfa_speed_to_rpsc_operspeed(pport_attr.speed);
 
@@ -2032,13 +2039,10 @@ bfa_fcs_rport_aen_post(struct bfa_fcs_rport_s *rport,
 
 	switch (event) {
 	case BFA_RPORT_AEN_ONLINE:
-		bfa_log(logmod, BFA_AEN_RPORT_ONLINE, rpwwn_ptr, lpwwn_ptr);
-		break;
 	case BFA_RPORT_AEN_OFFLINE:
-		bfa_log(logmod, BFA_AEN_RPORT_OFFLINE, rpwwn_ptr, lpwwn_ptr);
-		break;
 	case BFA_RPORT_AEN_DISCONNECT:
-		bfa_log(logmod, BFA_AEN_RPORT_DISCONNECT, rpwwn_ptr, lpwwn_ptr);
+		bfa_log(logmod, BFA_LOG_CREATE_ID(BFA_AEN_CAT_RPORT, event),
+			rpwwn_ptr, lpwwn_ptr);
 		break;
 	case BFA_RPORT_AEN_QOS_PRIO:
 		aen_data.rport.priv.qos = data->priv.qos;
@@ -2164,7 +2168,7 @@ bfa_fcs_rport_update(struct bfa_fcs_rport_s *rport, struct fc_logi_s *plogi)
 		bfa_trc(port->fcs, port->fabric->bb_credit);
 
 		port->fabric->bb_credit = bfa_os_ntohs(plogi->csp.bbcred);
-		bfa_pport_set_tx_bbcredit(port->fcs->bfa,
+		bfa_fcport_set_tx_bbcredit(port->fcs->bfa,
 					  port->fabric->bb_credit);
 	}
 
@@ -2575,23 +2579,6 @@ bfa_fcs_rport_send_ls_rjt(struct bfa_fcs_rport_s *rport, struct fchs_s *rx_fchs,
 }
 
 /**
- *   Module initialization
- */
-void
-bfa_fcs_rport_modinit(struct bfa_fcs_s *fcs)
-{
-}
-
-/**
- *   Module cleanup
- */
-void
-bfa_fcs_rport_modexit(struct bfa_fcs_s *fcs)
-{
-	bfa_fcs_modexit_comp(fcs);
-}
-
-/**
  * Return state of rport.
  */
 int
diff --git a/drivers/scsi/bfa/rport_api.c b/drivers/scsi/bfa/rport_api.c
index 3dae1774181e..a441f41d2a64 100644
--- a/drivers/scsi/bfa/rport_api.c
+++ b/drivers/scsi/bfa/rport_api.c
@@ -102,7 +102,7 @@ bfa_fcs_rport_get_attr(struct bfa_fcs_rport_s *rport,
 	rport_attr->qos_attr = qos_attr;
 
 	rport_attr->trl_enforced = BFA_FALSE;
-	if (bfa_pport_is_ratelim(port->fcs->bfa)) {
+	if (bfa_fcport_is_ratelim(port->fcs->bfa)) {
 		if ((rport->rpf.rpsc_speed == BFA_PPORT_SPEED_UNKNOWN) ||
 			(rport->rpf.rpsc_speed <
 			bfa_fcs_port_get_rport_max_speed(port)))
diff --git a/drivers/scsi/bfa/rport_ftrs.c b/drivers/scsi/bfa/rport_ftrs.c
index e1932c885ac2..ae7bba67ae2a 100644
--- a/drivers/scsi/bfa/rport_ftrs.c
+++ b/drivers/scsi/bfa/rport_ftrs.c
@@ -91,7 +91,7 @@ bfa_fcs_rpf_sm_uninit(struct bfa_fcs_rpf_s *rpf, enum rpf_event event)
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(rport->fcs, event);
 	}
 }
 
@@ -114,7 +114,7 @@ bfa_fcs_rpf_sm_rpsc_sending(struct bfa_fcs_rpf_s *rpf, enum rpf_event event)
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(rport->fcs, event);
 	}
 }
 
@@ -160,7 +160,7 @@ bfa_fcs_rpf_sm_rpsc(struct bfa_fcs_rpf_s *rpf, enum rpf_event event)
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(rport->fcs, event);
 	}
 }
 
@@ -186,7 +186,7 @@ bfa_fcs_rpf_sm_rpsc_retry(struct bfa_fcs_rpf_s *rpf, enum rpf_event event)
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(rport->fcs, event);
 	}
 }
 
@@ -206,7 +206,7 @@ bfa_fcs_rpf_sm_online(struct bfa_fcs_rpf_s *rpf, enum rpf_event event)
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(rport->fcs, event);
 	}
 }
 
@@ -229,7 +229,7 @@ bfa_fcs_rpf_sm_offline(struct bfa_fcs_rpf_s *rpf, enum rpf_event event)
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(rport->fcs, event);
 	}
 }
 /**
diff --git a/drivers/scsi/bfa/scn.c b/drivers/scsi/bfa/scn.c
index bd4771ff62c8..8fe09ba88a91 100644
--- a/drivers/scsi/bfa/scn.c
+++ b/drivers/scsi/bfa/scn.c
@@ -90,7 +90,7 @@ bfa_fcs_port_scn_sm_offline(struct bfa_fcs_port_scn_s *scn,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(scn->port->fcs, event);
 	}
 }
 
@@ -109,7 +109,7 @@ bfa_fcs_port_scn_sm_sending_scr(struct bfa_fcs_port_scn_s *scn,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(scn->port->fcs, event);
 	}
 }
 
@@ -137,7 +137,7 @@ bfa_fcs_port_scn_sm_scr(struct bfa_fcs_port_scn_s *scn,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(scn->port->fcs, event);
 	}
 }
 
@@ -157,7 +157,7 @@ bfa_fcs_port_scn_sm_scr_retry(struct bfa_fcs_port_scn_s *scn,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(scn->port->fcs, event);
 	}
 }
 
@@ -171,7 +171,7 @@ bfa_fcs_port_scn_sm_online(struct bfa_fcs_port_scn_s *scn,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(scn->port->fcs, event);
 	}
 }
 
diff --git a/drivers/scsi/bfa/vport.c b/drivers/scsi/bfa/vport.c
index e90f1e38c32d..27cd619a227a 100644
--- a/drivers/scsi/bfa/vport.c
+++ b/drivers/scsi/bfa/vport.c
@@ -122,7 +122,7 @@ bfa_fcs_vport_sm_uninit(struct bfa_fcs_vport_s *vport,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(__vport_fcs(vport), event);
 	}
 }
 
@@ -165,7 +165,7 @@ bfa_fcs_vport_sm_created(struct bfa_fcs_vport_s *vport,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(__vport_fcs(vport), event);
 	}
 }
 
@@ -202,7 +202,7 @@ bfa_fcs_vport_sm_offline(struct bfa_fcs_vport_s *vport,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(__vport_fcs(vport), event);
 	}
 }
 
@@ -249,7 +249,7 @@ bfa_fcs_vport_sm_fdisc(struct bfa_fcs_vport_s *vport,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(__vport_fcs(vport), event);
 	}
 }
 
@@ -283,7 +283,7 @@ bfa_fcs_vport_sm_fdisc_retry(struct bfa_fcs_vport_s *vport,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(__vport_fcs(vport), event);
 	}
 }
 
@@ -310,7 +310,7 @@ bfa_fcs_vport_sm_online(struct bfa_fcs_vport_s *vport,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(__vport_fcs(vport), event);
 	}
 }
 
@@ -339,7 +339,7 @@ bfa_fcs_vport_sm_deleting(struct bfa_fcs_vport_s *vport,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(__vport_fcs(vport), event);
 	}
 }
 
@@ -387,7 +387,7 @@ bfa_fcs_vport_sm_cleanup(struct bfa_fcs_vport_s *vport,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(__vport_fcs(vport), event);
 	}
 }
 
@@ -419,7 +419,7 @@ bfa_fcs_vport_sm_logo(struct bfa_fcs_vport_s *vport,
 		break;
 
 	default:
-		bfa_assert(0);
+		bfa_sm_fault(__vport_fcs(vport), event);
 	}
 }
 
@@ -447,22 +447,8 @@ bfa_fcs_vport_aen_post(bfa_fcs_lport_t *port, enum bfa_lport_aen_event event)
 
 	bfa_assert(role <= BFA_PORT_ROLE_FCP_MAX);
 
-	switch (event) {
-	case BFA_LPORT_AEN_NPIV_DUP_WWN:
-		bfa_log(logmod, BFA_AEN_LPORT_NPIV_DUP_WWN, lpwwn_ptr,
-			role_str[role / 2]);
-		break;
-	case BFA_LPORT_AEN_NPIV_FABRIC_MAX:
-		bfa_log(logmod, BFA_AEN_LPORT_NPIV_FABRIC_MAX, lpwwn_ptr,
-			role_str[role / 2]);
-		break;
-	case BFA_LPORT_AEN_NPIV_UNKNOWN:
-		bfa_log(logmod, BFA_AEN_LPORT_NPIV_UNKNOWN, lpwwn_ptr,
-			role_str[role / 2]);
-		break;
-	default:
-		break;
-	}
+	bfa_log(logmod, BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, event), lpwwn_ptr,
+			role_str[role/2]);
 
 	aen_data.lport.vf_id = port->fabric->vf_id;
 	aen_data.lport.roles = role;
@@ -478,7 +464,7 @@ static void
 bfa_fcs_vport_do_fdisc(struct bfa_fcs_vport_s *vport)
 {
 	bfa_lps_fdisc(vport->lps, vport,
-		      bfa_pport_get_maxfrsize(__vport_bfa(vport)),
+		      bfa_fcport_get_maxfrsize(__vport_bfa(vport)),
 		      __vport_pwwn(vport), __vport_nwwn(vport));
 	vport->vport_stats.fdisc_sent++;
 }
@@ -617,38 +603,6 @@ bfa_fcs_vport_delete_comp(struct bfa_fcs_vport_s *vport)
 }
 
 /**
- *   Module initialization
- */
-void
-bfa_fcs_vport_modinit(struct bfa_fcs_s *fcs)
-{
-}
-
-/**
- *   Module cleanup
- */
-void
-bfa_fcs_vport_modexit(struct bfa_fcs_s *fcs)
-{
-	bfa_fcs_modexit_comp(fcs);
-}
-
-u32
-bfa_fcs_vport_get_max(struct bfa_fcs_s *fcs)
-{
-	struct bfa_ioc_attr_s ioc_attr;
-
-	bfa_get_attr(fcs->bfa, &ioc_attr);
-
-	if (ioc_attr.pci_attr.device_id == BFA_PCI_DEVICE_ID_CT)
-		return BFA_FCS_MAX_VPORTS_SUPP_CT;
-	else
-		return BFA_FCS_MAX_VPORTS_SUPP_CB;
-}
-
-
-
-/**
  *  fcs_vport_api Virtual port API
  */
 
@@ -684,7 +638,7 @@ bfa_fcs_vport_create(struct bfa_fcs_vport_s *vport, struct bfa_fcs_s *fcs,
 		return BFA_STATUS_VPORT_EXISTS;
 
 	if (bfa_fcs_fabric_vport_count(&fcs->fabric) ==
-	    bfa_fcs_vport_get_max(fcs))
+		bfa_lps_get_max_vport(fcs->bfa))
 		return BFA_STATUS_VPORT_MAX;
 
 	vport->lps = bfa_lps_alloc(fcs->bfa);
@@ -694,7 +648,8 @@ bfa_fcs_vport_create(struct bfa_fcs_vport_s *vport, struct bfa_fcs_s *fcs,
 	vport->vport_drv = vport_drv;
 	bfa_sm_set_state(vport, bfa_fcs_vport_sm_uninit);
 
-	bfa_fcs_lport_init(&vport->lport, fcs, vf_id, vport_cfg, vport);
+	bfa_fcs_lport_attach(&vport->lport, fcs, vf_id, vport);
+	bfa_fcs_lport_init(&vport->lport, vport_cfg);
 
 	bfa_sm_send_event(vport, BFA_FCS_VPORT_SM_CREATE);
 
@@ -888,4 +843,15 @@ bfa_cb_lps_fdisclogo_comp(void *bfad, void *uarg)
 	bfa_sm_send_event(vport, BFA_FCS_VPORT_SM_RSP_OK);
 }
 
+/**
+ * Received clear virtual link
+ */
+void
+bfa_cb_lps_cvl_event(void *bfad, void *uarg)
+{
+	struct bfa_fcs_vport_s *vport = uarg;
 
+	/* Send an Offline followed by an ONLINE */
+	bfa_sm_send_event(vport, BFA_FCS_VPORT_SM_OFFLINE);
+	bfa_sm_send_event(vport, BFA_FCS_VPORT_SM_ONLINE);
+}
diff --git a/drivers/scsi/bnx2i/bnx2i_iscsi.c b/drivers/scsi/bnx2i/bnx2i_iscsi.c
index 1c4d1215769d..cb71dc984797 100644
--- a/drivers/scsi/bnx2i/bnx2i_iscsi.c
+++ b/drivers/scsi/bnx2i/bnx2i_iscsi.c
@@ -1989,7 +1989,7 @@ static struct scsi_host_template bnx2i_host_template = {
 	.queuecommand		= iscsi_queuecommand,
 	.eh_abort_handler	= iscsi_eh_abort,
 	.eh_device_reset_handler = iscsi_eh_device_reset,
-	.eh_target_reset_handler = iscsi_eh_target_reset,
+	.eh_target_reset_handler = iscsi_eh_recover_target,
 	.change_queue_depth	= iscsi_change_queue_depth,
 	.can_queue		= 1024,
 	.max_sectors		= 127,
diff --git a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
index 412853c65372..b7c30585dadd 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
+++ b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
@@ -915,7 +915,7 @@ static struct scsi_host_template cxgb3i_host_template = {
 	.cmd_per_lun		= ISCSI_DEF_CMD_PER_LUN,
 	.eh_abort_handler	= iscsi_eh_abort,
 	.eh_device_reset_handler = iscsi_eh_device_reset,
-	.eh_target_reset_handler = iscsi_eh_target_reset,
+	.eh_target_reset_handler = iscsi_eh_recover_target,
 	.target_alloc		= iscsi_target_alloc,
 	.use_clustering		= DISABLE_CLUSTERING,
 	.this_id		= -1,
diff --git a/drivers/scsi/device_handler/scsi_dh_emc.c b/drivers/scsi/device_handler/scsi_dh_emc.c
index 61966750bd60..63032ec3db92 100644
--- a/drivers/scsi/device_handler/scsi_dh_emc.c
+++ b/drivers/scsi/device_handler/scsi_dh_emc.c
@@ -272,7 +272,7 @@ static struct request *get_req(struct scsi_device *sdev, int cmd,
 	int len = 0;
 
 	rq = blk_get_request(sdev->request_queue,
-			(cmd == MODE_SELECT) ? WRITE : READ, GFP_NOIO);
+			(cmd != INQUIRY) ? WRITE : READ, GFP_NOIO);
 	if (!rq) {
 		sdev_printk(KERN_INFO, sdev, "get_req: blk_get_request failed");
 		return NULL;
@@ -286,14 +286,17 @@ static struct request *get_req(struct scsi_device *sdev, int cmd,
 		len = sizeof(short_trespass);
 		rq->cmd_flags |= REQ_RW;
 		rq->cmd[1] = 0x10;
+		rq->cmd[4] = len;
 		break;
 	case MODE_SELECT_10:
 		len = sizeof(long_trespass);
 		rq->cmd_flags |= REQ_RW;
 		rq->cmd[1] = 0x10;
+		rq->cmd[8] = len;
 		break;
 	case INQUIRY:
 		len = CLARIION_BUFFER_SIZE;
+		rq->cmd[4] = len;
 		memset(buffer, 0, len);
 		break;
 	default:
@@ -301,7 +304,6 @@ static struct request *get_req(struct scsi_device *sdev, int cmd,
 		break;
 	}
 
-	rq->cmd[4] = len;
 	rq->cmd_type = REQ_TYPE_BLOCK_PC;
 	rq->cmd_flags |= REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT |
 			 REQ_FAILFAST_DRIVER;
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 03697ba94251..183d3a43c280 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -43,6 +43,7 @@
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_device.h>
 #include <scsi/scsi_host.h>
+#include <scsi/scsi_tcq.h>
 #include <linux/cciss_ioctl.h>
 #include <linux/string.h>
 #include <linux/bitmap.h>
@@ -52,7 +53,7 @@
 #include "hpsa.h"
 
 /* HPSA_DRIVER_VERSION must be 3 byte values (0-255) separated by '.' */
-#define HPSA_DRIVER_VERSION "2.0.1-3"
+#define HPSA_DRIVER_VERSION "2.0.2-1"
 #define DRIVER_NAME "HP HPSA Driver (v " HPSA_DRIVER_VERSION ")"
 
 /* How long to wait (in milliseconds) for board to go into simple mode */
@@ -134,6 +135,8 @@ static int hpsa_scsi_queue_command(struct scsi_cmnd *cmd,
 static void hpsa_scan_start(struct Scsi_Host *);
 static int hpsa_scan_finished(struct Scsi_Host *sh,
 	unsigned long elapsed_time);
+static int hpsa_change_queue_depth(struct scsi_device *sdev,
+	int qdepth, int reason);
 
 static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd);
 static int hpsa_slave_alloc(struct scsi_device *sdev);
@@ -182,8 +185,8 @@ static struct scsi_host_template hpsa_driver_template = {
 	.queuecommand		= hpsa_scsi_queue_command,
 	.scan_start		= hpsa_scan_start,
 	.scan_finished		= hpsa_scan_finished,
+	.change_queue_depth	= hpsa_change_queue_depth,
 	.this_id		= -1,
-	.sg_tablesize		= MAXSGENTRIES,
 	.use_clustering		= ENABLE_CLUSTERING,
 	.eh_device_reset_handler = hpsa_eh_device_reset_handler,
 	.ioctl			= hpsa_ioctl,
@@ -208,133 +211,6 @@ static inline struct ctlr_info *shost_to_hba(struct Scsi_Host *sh)
 	return (struct ctlr_info *) *priv;
 }
 
-static struct task_struct *hpsa_scan_thread;
-static DEFINE_MUTEX(hpsa_scan_mutex);
-static LIST_HEAD(hpsa_scan_q);
-static int hpsa_scan_func(void *data);
-
-/**
- * add_to_scan_list() - add controller to rescan queue
- * @h:		      Pointer to the controller.
- *
- * Adds the controller to the rescan queue if not already on the queue.
- *
- * returns 1 if added to the queue, 0 if skipped (could be on the
- * queue already, or the controller could be initializing or shutting
- * down).
- **/
-static int add_to_scan_list(struct ctlr_info *h)
-{
-	struct ctlr_info *test_h;
-	int found = 0;
-	int ret = 0;
-
-	if (h->busy_initializing)
-		return 0;
-
-	/*
-	 * If we don't get the lock, it means the driver is unloading
-	 * and there's no point in scheduling a new scan.
-	 */
-	if (!mutex_trylock(&h->busy_shutting_down))
-		return 0;
-
-	mutex_lock(&hpsa_scan_mutex);
-	list_for_each_entry(test_h, &hpsa_scan_q, scan_list) {
-		if (test_h == h) {
-			found = 1;
-			break;
-		}
-	}
-	if (!found && !h->busy_scanning) {
-		INIT_COMPLETION(h->scan_wait);
-		list_add_tail(&h->scan_list, &hpsa_scan_q);
-		ret = 1;
-	}
-	mutex_unlock(&hpsa_scan_mutex);
-	mutex_unlock(&h->busy_shutting_down);
-
-	return ret;
-}
-
-/**
- * remove_from_scan_list() - remove controller from rescan queue
- * @h:			   Pointer to the controller.
- *
- * Removes the controller from the rescan queue if present. Blocks if
- * the controller is currently conducting a rescan.  The controller
- * can be in one of three states:
- * 1. Doesn't need a scan
- * 2. On the scan list, but not scanning yet (we remove it)
- * 3. Busy scanning (and not on the list). In this case we want to wait for
- *    the scan to complete to make sure the scanning thread for this
- *    controller is completely idle.
- **/
-static void remove_from_scan_list(struct ctlr_info *h)
-{
-	struct ctlr_info *test_h, *tmp_h;
-
-	mutex_lock(&hpsa_scan_mutex);
-	list_for_each_entry_safe(test_h, tmp_h, &hpsa_scan_q, scan_list) {
-		if (test_h == h) { /* state 2. */
-			list_del(&h->scan_list);
-			complete_all(&h->scan_wait);
-			mutex_unlock(&hpsa_scan_mutex);
-			return;
-		}
-	}
-	if (h->busy_scanning) { /* state 3. */
-		mutex_unlock(&hpsa_scan_mutex);
-		wait_for_completion(&h->scan_wait);
-	} else { /* state 1, nothing to do. */
-		mutex_unlock(&hpsa_scan_mutex);
-	}
-}
-
-/* hpsa_scan_func() - kernel thread used to rescan controllers
- * @data:	 Ignored.
- *
- * A kernel thread used scan for drive topology changes on
- * controllers. The thread processes only one controller at a time
- * using a queue.  Controllers are added to the queue using
- * add_to_scan_list() and removed from the queue either after done
- * processing or using remove_from_scan_list().
- *
- * returns 0.
- **/
-static int hpsa_scan_func(__attribute__((unused)) void *data)
-{
-	struct ctlr_info *h;
-	int host_no;
-
-	while (1) {
-		set_current_state(TASK_INTERRUPTIBLE);
-		schedule();
-		if (kthread_should_stop())
-			break;
-
-		while (1) {
-			mutex_lock(&hpsa_scan_mutex);
-			if (list_empty(&hpsa_scan_q)) {
-				mutex_unlock(&hpsa_scan_mutex);
-				break;
-			}
-			h = list_entry(hpsa_scan_q.next, struct ctlr_info,
-					scan_list);
-			list_del(&h->scan_list);
-			h->busy_scanning = 1;
-			mutex_unlock(&hpsa_scan_mutex);
-			host_no = h->scsi_host ?  h->scsi_host->host_no : -1;
-			hpsa_scan_start(h->scsi_host);
-			complete_all(&h->scan_wait);
-			mutex_lock(&hpsa_scan_mutex);
-			h->busy_scanning = 0;
-			mutex_unlock(&hpsa_scan_mutex);
-		}
-	}
-	return 0;
-}
-
 static int check_for_unit_attention(struct ctlr_info *h,
 	struct CommandList *c)
 {
@@ -352,21 +228,8 @@ static int check_for_unit_attention(struct ctlr_info *h,
 		break;
 	case REPORT_LUNS_CHANGED:
 		dev_warn(&h->pdev->dev, "hpsa%d: report LUN data "
-			"changed\n", h->ctlr);
+			"changed, action required\n", h->ctlr);
 	/*
-	 * Here, we could call add_to_scan_list and wake up the scan thread,
-	 * except that it's quite likely that we will get more than one
-	 * REPORT_LUNS_CHANGED condition in quick succession, which means
-	 * that those which occur after the first one will likely happen
-	 * *during* the hpsa_scan_thread's rescan.  And the rescan code is not
-	 * robust enough to restart in the middle, undoing what it has already
-	 * done, and it's not clear that it's even possible to do this, since
-	 * part of what it does is notify the SCSI mid layer, which starts
-	 * doing it's own i/o to read partition tables and so on, and the
-	 * driver doesn't have visibility to know what might need undoing.
-	 * In any event, if possible, it is horribly complicated to get right
-	 * so we just don't do it for now.
-	 *
 	 * Note: this REPORT_LUNS_CHANGED condition only occurs on the MSA2012.
 	 */
 		break;
@@ -393,10 +256,7 @@ static ssize_t host_store_rescan(struct device *dev,
 	struct ctlr_info *h;
 	struct Scsi_Host *shost = class_to_shost(dev);
 	h = shost_to_hba(shost);
-	if (add_to_scan_list(h)) {
-		wake_up_process(hpsa_scan_thread);
-		wait_for_completion_interruptible(&h->scan_wait);
-	}
+	hpsa_scan_start(h->scsi_host);
 	return count;
 }
 
@@ -983,6 +843,76 @@ static void hpsa_scsi_setup(struct ctlr_info *h)
 	spin_lock_init(&h->devlock);
 }
 
+static void hpsa_free_sg_chain_blocks(struct ctlr_info *h)
+{
+	int i;
+
+	if (!h->cmd_sg_list)
+		return;
+	for (i = 0; i < h->nr_cmds; i++) {
+		kfree(h->cmd_sg_list[i]);
+		h->cmd_sg_list[i] = NULL;
+	}
+	kfree(h->cmd_sg_list);
+	h->cmd_sg_list = NULL;
+}
+
+static int hpsa_allocate_sg_chain_blocks(struct ctlr_info *h)
+{
+	int i;
+
+	if (h->chainsize <= 0)
+		return 0;
+
+	h->cmd_sg_list = kzalloc(sizeof(*h->cmd_sg_list) * h->nr_cmds,
+				GFP_KERNEL);
+	if (!h->cmd_sg_list)
+		return -ENOMEM;
+	for (i = 0; i < h->nr_cmds; i++) {
+		h->cmd_sg_list[i] = kmalloc(sizeof(*h->cmd_sg_list[i]) *
+						h->chainsize, GFP_KERNEL);
+		if (!h->cmd_sg_list[i])
+			goto clean;
+	}
+	return 0;
+
+clean:
+	hpsa_free_sg_chain_blocks(h);
+	return -ENOMEM;
+}
+
+static void hpsa_map_sg_chain_block(struct ctlr_info *h,
+	struct CommandList *c)
+{
+	struct SGDescriptor *chain_sg, *chain_block;
+	u64 temp64;
+
+	chain_sg = &c->SG[h->max_cmd_sg_entries - 1];
+	chain_block = h->cmd_sg_list[c->cmdindex];
+	chain_sg->Ext = HPSA_SG_CHAIN;
+	chain_sg->Len = sizeof(*chain_sg) *
+		(c->Header.SGTotal - h->max_cmd_sg_entries);
+	temp64 = pci_map_single(h->pdev, chain_block, chain_sg->Len,
+				PCI_DMA_TODEVICE);
+	chain_sg->Addr.lower = (u32) (temp64 & 0x0FFFFFFFFULL);
+	chain_sg->Addr.upper = (u32) ((temp64 >> 32) & 0x0FFFFFFFFULL);
+}
+
+static void hpsa_unmap_sg_chain_block(struct ctlr_info *h,
+	struct CommandList *c)
+{
+	struct SGDescriptor *chain_sg;
+	union u64bit temp64;
+
+	if (c->Header.SGTotal <= h->max_cmd_sg_entries)
+		return;
+
+	chain_sg = &c->SG[h->max_cmd_sg_entries - 1];
+	temp64.val32.lower = chain_sg->Addr.lower;
+	temp64.val32.upper = chain_sg->Addr.upper;
+	pci_unmap_single(h->pdev, temp64.val, chain_sg->Len, PCI_DMA_TODEVICE);
+}
+
 static void complete_scsi_command(struct CommandList *cp,
 	int timeout, u32 tag)
 {
@@ -999,10 +929,12 @@ static void complete_scsi_command(struct CommandList *cp,
 	h = cp->h;
 
 	scsi_dma_unmap(cmd); /* undo the DMA mappings */
+	if (cp->Header.SGTotal > h->max_cmd_sg_entries)
+		hpsa_unmap_sg_chain_block(h, cp);
 
 	cmd->result = (DID_OK << 16); 		/* host byte */
 	cmd->result |= (COMMAND_COMPLETE << 8);	/* msg byte */
-	cmd->result |= (ei->ScsiStatus << 1);
+	cmd->result |= ei->ScsiStatus;
 
 	/* copy the sense data whether we need to or not. */
 	memcpy(cmd->sense_buffer, ei->SenseInfo,
@@ -1203,6 +1135,7 @@ static int hpsa_scsi_detect(struct ctlr_info *h)
 	sh->max_id = HPSA_MAX_LUN;
 	sh->can_queue = h->nr_cmds;
 	sh->cmd_per_lun = h->nr_cmds;
+	sh->sg_tablesize = h->maxsgentries;
 	h->scsi_host = sh;
 	sh->hostdata[0] = (unsigned long) h;
 	sh->irq = h->intr[PERF_MODE_INT];
@@ -1382,7 +1315,7 @@ static int hpsa_send_reset(struct ctlr_info *h, unsigned char *scsi3addr)
 
 	if (c == NULL) {			/* trouble... */
 		dev_warn(&h->pdev->dev, "cmd_special_alloc returned NULL!\n");
-		return -1;
+		return -ENOMEM;
 	}
 
 	fill_cmd(c, HPSA_DEVICE_RESET_MSG, h, NULL, 0, 0, scsi3addr, TYPE_MSG);
@@ -1904,16 +1837,17 @@ out:
  * dma mapping  and fills in the scatter gather entries of the
  * hpsa command, cp.
  */
-static int hpsa_scatter_gather(struct pci_dev *pdev,
+static int hpsa_scatter_gather(struct ctlr_info *h,
 		struct CommandList *cp,
 		struct scsi_cmnd *cmd)
 {
 	unsigned int len;
 	struct scatterlist *sg;
 	u64 addr64;
-	int use_sg, i;
+	int use_sg, i, sg_index, chained;
+	struct SGDescriptor *curr_sg;
 
-	BUG_ON(scsi_sg_count(cmd) > MAXSGENTRIES);
+	BUG_ON(scsi_sg_count(cmd) > h->maxsgentries);
 
 	use_sg = scsi_dma_map(cmd);
 	if (use_sg < 0)
@@ -1922,15 +1856,33 @@ static int hpsa_scatter_gather(struct pci_dev *pdev,
 	if (!use_sg)
 		goto sglist_finished;
 
+	curr_sg = cp->SG;
+	chained = 0;
+	sg_index = 0;
 	scsi_for_each_sg(cmd, sg, use_sg, i) {
+		if (i == h->max_cmd_sg_entries - 1 &&
+			use_sg > h->max_cmd_sg_entries) {
+			chained = 1;
+			curr_sg = h->cmd_sg_list[cp->cmdindex];
+			sg_index = 0;
+		}
 		addr64 = (u64) sg_dma_address(sg);
 		len  = sg_dma_len(sg);
-		cp->SG[i].Addr.lower =
-			(u32) (addr64 & (u64) 0x00000000FFFFFFFF);
-		cp->SG[i].Addr.upper =
-			(u32) ((addr64 >> 32) & (u64) 0x00000000FFFFFFFF);
-		cp->SG[i].Len = len;
-		cp->SG[i].Ext = 0;  /* we are not chaining */
+		curr_sg->Addr.lower = (u32) (addr64 & 0x0FFFFFFFFULL);
+		curr_sg->Addr.upper = (u32) ((addr64 >> 32) & 0x0FFFFFFFFULL);
+		curr_sg->Len = len;
+		curr_sg->Ext = 0;  /* we are not chaining */
+		curr_sg++;
+	}
+
+	if (use_sg + chained > h->maxSG)
+		h->maxSG = use_sg + chained;
+
+	if (chained) {
+		cp->Header.SGList = h->max_cmd_sg_entries;
+		cp->Header.SGTotal = (u16) (use_sg + 1);
+		hpsa_map_sg_chain_block(h, cp);
+		return 0;
 	}
 
 sglist_finished:
@@ -2026,7 +1978,7 @@ static int hpsa_scsi_queue_command(struct scsi_cmnd *cmd,
 		break;
 	}
 
-	if (hpsa_scatter_gather(h->pdev, c, cmd) < 0) { /* Fill SG list */
+	if (hpsa_scatter_gather(h, c, cmd) < 0) { /* Fill SG list */
 		cmd_free(h, c);
 		return SCSI_MLQUEUE_HOST_BUSY;
 	}
@@ -2077,6 +2029,23 @@ static int hpsa_scan_finished(struct Scsi_Host *sh,
 	return finished;
 }
 
+static int hpsa_change_queue_depth(struct scsi_device *sdev,
+	int qdepth, int reason)
+{
+	struct ctlr_info *h = sdev_to_hba(sdev);
+
+	if (reason != SCSI_QDEPTH_DEFAULT)
+		return -ENOTSUPP;
+
+	if (qdepth < 1)
+		qdepth = 1;
+	else
+		if (qdepth > h->nr_cmds)
+			qdepth = h->nr_cmds;
+	scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
+	return sdev->queue_depth;
+}
+
 static void hpsa_unregister_scsi(struct ctlr_info *h)
 {
 	/* we are being forcibly unloaded, and may not refuse. */
@@ -2961,7 +2930,7 @@ static irqreturn_t do_hpsa_intr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-/* Send a message CDB to the firmwart. */
+/* Send a message CDB to the firmware. */
 static __devinit int hpsa_message(struct pci_dev *pdev, unsigned char opcode,
 						unsigned char type)
 {
@@ -3296,7 +3265,7 @@ default_int_mode:
 	h->intr[PERF_MODE_INT] = pdev->irq;
 }
 
-static int hpsa_pci_init(struct ctlr_info *h, struct pci_dev *pdev)
+static int __devinit hpsa_pci_init(struct ctlr_info *h, struct pci_dev *pdev)
 {
 	ushort subsystem_vendor_id, subsystem_device_id, command;
 	u32 board_id, scratchpad = 0;
@@ -3405,6 +3374,23 @@ static int hpsa_pci_init(struct ctlr_info *h, struct pci_dev *pdev)
 
 	h->board_id = board_id;
 	h->max_commands = readl(&(h->cfgtable->MaxPerformantModeCommands));
+	h->maxsgentries = readl(&(h->cfgtable->MaxScatterGatherElements));
+
+	/*
+	 * Limit in-command s/g elements to 32 save dma'able memory.
+	 * Howvever spec says if 0, use 31
+	 */
+
+	h->max_cmd_sg_entries = 31;
+	if (h->maxsgentries > 512) {
+		h->max_cmd_sg_entries = 32;
+		h->chainsize = h->maxsgentries - h->max_cmd_sg_entries + 1;
+		h->maxsgentries--; /* save one for chain pointer */
+	} else {
+		h->maxsgentries = 31; /* default to traditional values */
+		h->chainsize = 0;
+	}
+
 	h->product_name = products[prod_index].product_name;
 	h->access = *(products[prod_index].access);
 	/* Allow room for some ioctls */
@@ -3532,8 +3518,6 @@ static int __devinit hpsa_init_one(struct pci_dev *pdev,
 	h->busy_initializing = 1;
 	INIT_HLIST_HEAD(&h->cmpQ);
 	INIT_HLIST_HEAD(&h->reqQ);
-	mutex_init(&h->busy_shutting_down);
-	init_completion(&h->scan_wait);
 	rc = hpsa_pci_init(h, pdev);
 	if (rc != 0)
 		goto clean1;
@@ -3587,6 +3571,8 @@ static int __devinit hpsa_init_one(struct pci_dev *pdev,
 		rc = -ENOMEM;
 		goto clean4;
 	}
+	if (hpsa_allocate_sg_chain_blocks(h))
+		goto clean4;
 	spin_lock_init(&h->lock);
 	spin_lock_init(&h->scan_lock);
 	init_waitqueue_head(&h->scan_wait_queue);
@@ -3609,6 +3595,7 @@ static int __devinit hpsa_init_one(struct pci_dev *pdev,
 	return 1;
 
 clean4:
+	hpsa_free_sg_chain_blocks(h);
 	kfree(h->cmd_pool_bits);
 	if (h->cmd_pool)
 		pci_free_consistent(h->pdev,
@@ -3681,11 +3668,10 @@ static void __devexit hpsa_remove_one(struct pci_dev *pdev)
 		return;
 	}
 	h = pci_get_drvdata(pdev);
-	mutex_lock(&h->busy_shutting_down);
-	remove_from_scan_list(h);
 	hpsa_unregister_scsi(h);	/* unhook from SCSI subsystem */
 	hpsa_shutdown(pdev);
 	iounmap(h->vaddr);
+	hpsa_free_sg_chain_blocks(h);
 	pci_free_consistent(h->pdev,
 		h->nr_cmds * sizeof(struct CommandList),
 		h->cmd_pool, h->cmd_pool_dhandle);
@@ -3703,7 +3689,6 @@ static void __devexit hpsa_remove_one(struct pci_dev *pdev)
 	 */
 	pci_release_regions(pdev);
 	pci_set_drvdata(pdev, NULL);
-	mutex_unlock(&h->busy_shutting_down);
 	kfree(h);
 }
 
@@ -3857,23 +3842,12 @@ clean_up:
  */
 static int __init hpsa_init(void)
 {
-	int err;
-	/* Start the scan thread */
-	hpsa_scan_thread = kthread_run(hpsa_scan_func, NULL, "hpsa_scan");
-	if (IS_ERR(hpsa_scan_thread)) {
-		err = PTR_ERR(hpsa_scan_thread);
-		return -ENODEV;
-	}
-	err = pci_register_driver(&hpsa_pci_driver);
-	if (err)
-		kthread_stop(hpsa_scan_thread);
-	return err;
+	return pci_register_driver(&hpsa_pci_driver);
 }
 
 static void __exit hpsa_cleanup(void)
 {
 	pci_unregister_driver(&hpsa_pci_driver);
-	kthread_stop(hpsa_scan_thread);
 }
 
 module_init(hpsa_init);
diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h
index a0502b3ac17e..1bb5233b09a0 100644
--- a/drivers/scsi/hpsa.h
+++ b/drivers/scsi/hpsa.h
@@ -83,6 +83,10 @@ struct ctlr_info {
 	unsigned int maxQsinceinit;
 	unsigned int maxSG;
 	spinlock_t lock;
+	int maxsgentries;
+	u8 max_cmd_sg_entries;
+	int chainsize;
+	struct SGDescriptor **cmd_sg_list;
 
 	/* pointers to command and error info pool */
 	struct CommandList 	*cmd_pool;
@@ -97,9 +101,6 @@ struct ctlr_info {
 	int			scan_finished;
 	spinlock_t		scan_lock;
 	wait_queue_head_t	scan_wait_queue;
-	struct mutex		busy_shutting_down;
-	struct list_head	scan_list;
-	struct completion	scan_wait;
 
 	struct Scsi_Host *scsi_host;
 	spinlock_t devlock; /* to protect hba[ctlr]->dev[];  */
diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h
index 3e0abdf76689..56fb9827681e 100644
--- a/drivers/scsi/hpsa_cmd.h
+++ b/drivers/scsi/hpsa_cmd.h
@@ -23,7 +23,8 @@
 
 /* general boundary defintions */
 #define SENSEINFOBYTES          32 /* may vary between hbas */
-#define MAXSGENTRIES            31
+#define MAXSGENTRIES            32
+#define HPSA_SG_CHAIN		0x80000000
 #define MAXREPLYQS              256
 
 /* Command Status value */
@@ -305,20 +306,23 @@ struct CommandList {
 	int			   cmd_type;
 	long			   cmdindex;
 	struct hlist_node list;
-	struct CommandList *prev;
-	struct CommandList *next;
 	struct request *rq;
 	struct completion *waiting;
-	int	 retry_count;
 	void   *scsi_cmd;
 
 /* on 64 bit architectures, to get this to be 32-byte-aligned
- * it so happens we need no padding, on 32 bit systems,
- * we need 8 bytes of padding.   This does that.
+ * it so happens we need PAD_64 bytes of padding, on 32 bit systems,
+ * we need PAD_32 bytes of padding (see below).   This does that.
+ * If it happens that 64 bit and 32 bit systems need different
+ * padding, PAD_32 and PAD_64 can be set independently, and.
+ * the code below will do the right thing.
  */
-#define COMMANDLIST_PAD ((8 - sizeof(long))/4 * 8)
+#define IS_32_BIT ((8 - sizeof(long))/4)
+#define IS_64_BIT (!IS_32_BIT)
+#define PAD_32 (4)
+#define PAD_64 (4)
+#define COMMANDLIST_PAD (IS_32_BIT * PAD_32 + IS_64_BIT * PAD_64)
 	u8 pad[COMMANDLIST_PAD];
-
 };
 
 /* Configuration Table Structure */
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index 732f6d35b4a8..4e577e2fee38 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -29,6 +29,7 @@
 #include <linux/interrupt.h>
 #include <linux/kthread.h>
 #include <linux/of.h>
+#include <linux/pm.h>
 #include <linux/stringify.h>
 #include <asm/firmware.h>
 #include <asm/irq.h>
@@ -4736,6 +4737,27 @@ static int ibmvfc_remove(struct vio_dev *vdev)
 }
 
 /**
+ * ibmvfc_resume - Resume from suspend
+ * @dev:	device struct
+ *
+ * We may have lost an interrupt across suspend/resume, so kick the
+ * interrupt handler
+ *
+ */
+static int ibmvfc_resume(struct device *dev)
+{
+	unsigned long flags;
+	struct ibmvfc_host *vhost = dev_get_drvdata(dev);
+	struct vio_dev *vdev = to_vio_dev(dev);
+
+	spin_lock_irqsave(vhost->host->host_lock, flags);
+	vio_disable_interrupts(vdev);
+	tasklet_schedule(&vhost->tasklet);
+	spin_unlock_irqrestore(vhost->host->host_lock, flags);
+	return 0;
+}
+
+/**
  * ibmvfc_get_desired_dma - Calculate DMA resources needed by the driver
  * @vdev:	vio device struct
  *
@@ -4755,6 +4777,10 @@ static struct vio_device_id ibmvfc_device_table[] __devinitdata = {
 };
 MODULE_DEVICE_TABLE(vio, ibmvfc_device_table);
 
+static struct dev_pm_ops ibmvfc_pm_ops = {
+	.resume = ibmvfc_resume
+};
+
 static struct vio_driver ibmvfc_driver = {
 	.id_table = ibmvfc_device_table,
 	.probe = ibmvfc_probe,
@@ -4763,6 +4789,7 @@ static struct vio_driver ibmvfc_driver = {
 	.driver = {
 		.name = IBMVFC_NAME,
 		.owner = THIS_MODULE,
+		.pm = &ibmvfc_pm_ops,
 	}
 };
 
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index e3a18e0ef276..dc1bcbe3b176 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -71,6 +71,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/delay.h>
 #include <linux/of.h>
+#include <linux/pm.h>
 #include <asm/firmware.h>
 #include <asm/vio.h>
 #include <scsi/scsi.h>
@@ -1991,6 +1992,19 @@ static int ibmvscsi_remove(struct vio_dev *vdev)
 }
 
 /**
+ * ibmvscsi_resume: Resume from suspend
+ * @dev:	device struct
+ *
+ * We may have lost an interrupt across suspend/resume, so kick the
+ * interrupt handler
+ */
+static int ibmvscsi_resume(struct device *dev)
+{
+	struct ibmvscsi_host_data *hostdata = dev_get_drvdata(dev);
+	return ibmvscsi_ops->resume(hostdata);
+}
+
+/**
  * ibmvscsi_device_table: Used by vio.c to match devices in the device tree we 
  * support.
  */
@@ -2000,6 +2014,10 @@ static struct vio_device_id ibmvscsi_device_table[] __devinitdata = {
 };
 MODULE_DEVICE_TABLE(vio, ibmvscsi_device_table);
 
+static struct dev_pm_ops ibmvscsi_pm_ops = {
+	.resume = ibmvscsi_resume
+};
+
 static struct vio_driver ibmvscsi_driver = {
 	.id_table = ibmvscsi_device_table,
 	.probe = ibmvscsi_probe,
@@ -2008,6 +2026,7 @@ static struct vio_driver ibmvscsi_driver = {
 	.driver = {
 		.name = "ibmvscsi",
 		.owner = THIS_MODULE,
+		.pm = &ibmvscsi_pm_ops,
 	}
 };
 
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.h b/drivers/scsi/ibmvscsi/ibmvscsi.h
index 76425303def0..9cb7c6a773e1 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.h
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.h
@@ -120,6 +120,7 @@ struct ibmvscsi_ops {
 				  struct ibmvscsi_host_data *hostdata);
 	int (*send_crq)(struct ibmvscsi_host_data *hostdata,
 		       u64 word1, u64 word2);
+	int (*resume) (struct ibmvscsi_host_data *hostdata);
 };
 
 extern struct ibmvscsi_ops iseriesvscsi_ops;
diff --git a/drivers/scsi/ibmvscsi/iseries_vscsi.c b/drivers/scsi/ibmvscsi/iseries_vscsi.c
index 0775fdee5fa8..f4776451a754 100644
--- a/drivers/scsi/ibmvscsi/iseries_vscsi.c
+++ b/drivers/scsi/ibmvscsi/iseries_vscsi.c
@@ -158,10 +158,16 @@ static int iseriesvscsi_send_crq(struct ibmvscsi_host_data *hostdata,
 					     0);
 }
 
+static int iseriesvscsi_resume(struct ibmvscsi_host_data *hostdata)
+{
+	return 0;
+}
+
 struct ibmvscsi_ops iseriesvscsi_ops = {
 	.init_crq_queue = iseriesvscsi_init_crq_queue,
 	.release_crq_queue = iseriesvscsi_release_crq_queue,
 	.reset_crq_queue = iseriesvscsi_reset_crq_queue,
 	.reenable_crq_queue = iseriesvscsi_reenable_crq_queue,
 	.send_crq = iseriesvscsi_send_crq,
+	.resume = iseriesvscsi_resume,
 };
diff --git a/drivers/scsi/ibmvscsi/rpa_vscsi.c b/drivers/scsi/ibmvscsi/rpa_vscsi.c
index 462a8574dad9..63a30cbbf9de 100644
--- a/drivers/scsi/ibmvscsi/rpa_vscsi.c
+++ b/drivers/scsi/ibmvscsi/rpa_vscsi.c
@@ -334,10 +334,23 @@ static int rpavscsi_reenable_crq_queue(struct crq_queue *queue,
 	return rc;
 }
 
+/**
+ * rpavscsi_resume: - resume after suspend
+ * @hostdata:	ibmvscsi_host_data of host
+ *
+ */
+static int rpavscsi_resume(struct ibmvscsi_host_data *hostdata)
+{
+	vio_disable_interrupts(to_vio_dev(hostdata->dev));
+	tasklet_schedule(&hostdata->srp_task);
+	return 0;
+}
+
 struct ibmvscsi_ops rpavscsi_ops = {
 	.init_crq_queue = rpavscsi_init_crq_queue,
 	.release_crq_queue = rpavscsi_release_crq_queue,
 	.reset_crq_queue = rpavscsi_reset_crq_queue,
 	.reenable_crq_queue = rpavscsi_reenable_crq_queue,
 	.send_crq = rpavscsi_send_crq,
+	.resume = rpavscsi_resume,
 };
diff --git a/drivers/scsi/initio.c b/drivers/scsi/initio.c
index 89a59484be02..a7714160fbc3 100644
--- a/drivers/scsi/initio.c
+++ b/drivers/scsi/initio.c
@@ -531,7 +531,7 @@ static void initio_read_eeprom(unsigned long base)
  *	initio_stop_bm		-	stop bus master
  *	@host: InitIO we are stopping
  *
- *	Stop any pending DMA operation, aborting the DMA if neccessary
+ *	Stop any pending DMA operation, aborting the DMA if necessary
  */
 
 static void initio_stop_bm(struct initio_host * host)
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 032f0d0e6cb4..c79cd98eb6bf 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -72,6 +72,8 @@
 #include <linux/moduleparam.h>
 #include <linux/libata.h>
 #include <linux/hdreg.h>
+#include <linux/reboot.h>
+#include <linux/stringify.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/processor.h>
@@ -91,8 +93,8 @@ static unsigned int ipr_max_speed = 1;
 static int ipr_testmode = 0;
 static unsigned int ipr_fastfail = 0;
 static unsigned int ipr_transop_timeout = 0;
-static unsigned int ipr_enable_cache = 1;
 static unsigned int ipr_debug = 0;
+static unsigned int ipr_max_devs = IPR_DEFAULT_SIS64_DEVS;
 static unsigned int ipr_dual_ioa_raid = 1;
 static DEFINE_SPINLOCK(ipr_driver_lock);
 
@@ -104,13 +106,20 @@ static const struct ipr_chip_cfg_t ipr_chip_cfg[] = {
 		{
 			.set_interrupt_mask_reg = 0x0022C,
 			.clr_interrupt_mask_reg = 0x00230,
+			.clr_interrupt_mask_reg32 = 0x00230,
 			.sense_interrupt_mask_reg = 0x0022C,
+			.sense_interrupt_mask_reg32 = 0x0022C,
 			.clr_interrupt_reg = 0x00228,
+			.clr_interrupt_reg32 = 0x00228,
 			.sense_interrupt_reg = 0x00224,
+			.sense_interrupt_reg32 = 0x00224,
 			.ioarrin_reg = 0x00404,
 			.sense_uproc_interrupt_reg = 0x00214,
+			.sense_uproc_interrupt_reg32 = 0x00214,
 			.set_uproc_interrupt_reg = 0x00214,
-			.clr_uproc_interrupt_reg = 0x00218
+			.set_uproc_interrupt_reg32 = 0x00214,
+			.clr_uproc_interrupt_reg = 0x00218,
+			.clr_uproc_interrupt_reg32 = 0x00218
 		}
 	},
 	{ /* Snipe and Scamp */
@@ -119,25 +128,59 @@ static const struct ipr_chip_cfg_t ipr_chip_cfg[] = {
 		{
 			.set_interrupt_mask_reg = 0x00288,
 			.clr_interrupt_mask_reg = 0x0028C,
+			.clr_interrupt_mask_reg32 = 0x0028C,
 			.sense_interrupt_mask_reg = 0x00288,
+			.sense_interrupt_mask_reg32 = 0x00288,
 			.clr_interrupt_reg = 0x00284,
+			.clr_interrupt_reg32 = 0x00284,
 			.sense_interrupt_reg = 0x00280,
+			.sense_interrupt_reg32 = 0x00280,
 			.ioarrin_reg = 0x00504,
 			.sense_uproc_interrupt_reg = 0x00290,
+			.sense_uproc_interrupt_reg32 = 0x00290,
 			.set_uproc_interrupt_reg = 0x00290,
-			.clr_uproc_interrupt_reg = 0x00294
+			.set_uproc_interrupt_reg32 = 0x00290,
+			.clr_uproc_interrupt_reg = 0x00294,
+			.clr_uproc_interrupt_reg32 = 0x00294
+		}
+	},
+	{ /* CRoC */
+		.mailbox = 0x00040,
+		.cache_line_size = 0x20,
+		{
+			.set_interrupt_mask_reg = 0x00010,
+			.clr_interrupt_mask_reg = 0x00018,
+			.clr_interrupt_mask_reg32 = 0x0001C,
+			.sense_interrupt_mask_reg = 0x00010,
+			.sense_interrupt_mask_reg32 = 0x00014,
+			.clr_interrupt_reg = 0x00008,
+			.clr_interrupt_reg32 = 0x0000C,
+			.sense_interrupt_reg = 0x00000,
+			.sense_interrupt_reg32 = 0x00004,
+			.ioarrin_reg = 0x00070,
+			.sense_uproc_interrupt_reg = 0x00020,
+			.sense_uproc_interrupt_reg32 = 0x00024,
+			.set_uproc_interrupt_reg = 0x00020,
+			.set_uproc_interrupt_reg32 = 0x00024,
+			.clr_uproc_interrupt_reg = 0x00028,
+			.clr_uproc_interrupt_reg32 = 0x0002C,
+			.init_feedback_reg = 0x0005C,
+			.dump_addr_reg = 0x00064,
+			.dump_data_reg = 0x00068
 		}
 	},
 };
 
 static const struct ipr_chip_t ipr_chip[] = {
-	{ PCI_VENDOR_ID_MYLEX, PCI_DEVICE_ID_IBM_GEMSTONE, IPR_USE_LSI, &ipr_chip_cfg[0] },
-	{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE, IPR_USE_LSI, &ipr_chip_cfg[0] },
-	{ PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_OBSIDIAN, IPR_USE_LSI, &ipr_chip_cfg[0] },
-	{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN, IPR_USE_LSI, &ipr_chip_cfg[0] },
-	{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN_E, IPR_USE_MSI, &ipr_chip_cfg[0] },
-	{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_SNIPE, IPR_USE_LSI, &ipr_chip_cfg[1] },
-	{ PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_SCAMP, IPR_USE_LSI, &ipr_chip_cfg[1] }
+	{ PCI_VENDOR_ID_MYLEX, PCI_DEVICE_ID_IBM_GEMSTONE, IPR_USE_LSI, IPR_SIS32, &ipr_chip_cfg[0] },
+	{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE, IPR_USE_LSI, IPR_SIS32, &ipr_chip_cfg[0] },
+	{ PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_OBSIDIAN, IPR_USE_LSI, IPR_SIS32, &ipr_chip_cfg[0] },
+	{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN, IPR_USE_LSI, IPR_SIS32, &ipr_chip_cfg[0] },
+	{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN_E, IPR_USE_MSI, IPR_SIS32, &ipr_chip_cfg[0] },
+	{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_SNIPE, IPR_USE_LSI, IPR_SIS32, &ipr_chip_cfg[1] },
+	{ PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_SCAMP, IPR_USE_LSI, IPR_SIS32, &ipr_chip_cfg[1] },
+	{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROC_FPGA_E2, IPR_USE_MSI, IPR_SIS64, &ipr_chip_cfg[2] },
+	{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROC_ASIC_E2, IPR_USE_MSI, IPR_SIS64, &ipr_chip_cfg[2] }
 };
 
 static int ipr_max_bus_speeds [] = {
@@ -156,12 +199,13 @@ module_param_named(fastfail, ipr_fastfail, int, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(fastfail, "Reduce timeouts and retries");
 module_param_named(transop_timeout, ipr_transop_timeout, int, 0);
 MODULE_PARM_DESC(transop_timeout, "Time in seconds to wait for adapter to come operational (default: 300)");
-module_param_named(enable_cache, ipr_enable_cache, int, 0);
-MODULE_PARM_DESC(enable_cache, "Enable adapter's non-volatile write cache (default: 1)");
 module_param_named(debug, ipr_debug, int, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Enable device driver debugging logging. Set to 1 to enable. (default: 0)");
 module_param_named(dual_ioa_raid, ipr_dual_ioa_raid, int, 0);
 MODULE_PARM_DESC(dual_ioa_raid, "Enable dual adapter RAID support. Set to 1 to enable. (default: 1)");
+module_param_named(max_devs, ipr_max_devs, int, 0);
+MODULE_PARM_DESC(max_devs, "Specify the maximum number of physical devices. "
+		 "[Default=" __stringify(IPR_DEFAULT_SIS64_DEVS) "]");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(IPR_DRIVER_VERSION);
 
@@ -180,6 +224,20 @@ struct ipr_error_table_t ipr_error_table[] = {
 	"FFFE: Soft device bus error recovered by the IOA"},
 	{0x01088100, 0, IPR_DEFAULT_LOG_LEVEL,
 	"4101: Soft device bus fabric error"},
+	{0x01100100, 0, IPR_DEFAULT_LOG_LEVEL,
+	"FFFC: Logical block guard error recovered by the device"},
+	{0x01100300, 0, IPR_DEFAULT_LOG_LEVEL,
+	"FFFC: Logical block reference tag error recovered by the device"},
+	{0x01108300, 0, IPR_DEFAULT_LOG_LEVEL,
+	"4171: Recovered scatter list tag / sequence number error"},
+	{0x01109000, 0, IPR_DEFAULT_LOG_LEVEL,
+	"FF3D: Recovered logical block CRC error on IOA to Host transfer"},
+	{0x01109200, 0, IPR_DEFAULT_LOG_LEVEL,
+	"4171: Recovered logical block sequence number error on IOA to Host transfer"},
+	{0x0110A000, 0, IPR_DEFAULT_LOG_LEVEL,
+	"FFFD: Recovered logical block reference tag error detected by the IOA"},
+	{0x0110A100, 0, IPR_DEFAULT_LOG_LEVEL,
+	"FFFD: Logical block guard error recovered by the IOA"},
 	{0x01170600, 0, IPR_DEFAULT_LOG_LEVEL,
 	"FFF9: Device sector reassign successful"},
 	{0x01170900, 0, IPR_DEFAULT_LOG_LEVEL,
@@ -236,12 +294,28 @@ struct ipr_error_table_t ipr_error_table[] = {
 	"3120: SCSI bus is not operational"},
 	{0x04088100, 0, IPR_DEFAULT_LOG_LEVEL,
 	"4100: Hard device bus fabric error"},
+	{0x04100100, 0, IPR_DEFAULT_LOG_LEVEL,
+	"310C: Logical block guard error detected by the device"},
+	{0x04100300, 0, IPR_DEFAULT_LOG_LEVEL,
+	"310C: Logical block reference tag error detected by the device"},
+	{0x04108300, 1, IPR_DEFAULT_LOG_LEVEL,
+	"4170: Scatter list tag / sequence number error"},
+	{0x04109000, 1, IPR_DEFAULT_LOG_LEVEL,
+	"8150: Logical block CRC error on IOA to Host transfer"},
+	{0x04109200, 1, IPR_DEFAULT_LOG_LEVEL,
+	"4170: Logical block sequence number error on IOA to Host transfer"},
+	{0x0410A000, 0, IPR_DEFAULT_LOG_LEVEL,
+	"310D: Logical block reference tag error detected by the IOA"},
+	{0x0410A100, 0, IPR_DEFAULT_LOG_LEVEL,
+	"310D: Logical block guard error detected by the IOA"},
 	{0x04118000, 0, IPR_DEFAULT_LOG_LEVEL,
 	"9000: IOA reserved area data check"},
 	{0x04118100, 0, IPR_DEFAULT_LOG_LEVEL,
 	"9001: IOA reserved area invalid data pattern"},
 	{0x04118200, 0, IPR_DEFAULT_LOG_LEVEL,
 	"9002: IOA reserved area LRC error"},
+	{0x04118300, 1, IPR_DEFAULT_LOG_LEVEL,
+	"Hardware Error, IOA metadata access error"},
 	{0x04320000, 0, IPR_DEFAULT_LOG_LEVEL,
 	"102E: Out of alternate sectors for disk storage"},
 	{0x04330000, 1, IPR_DEFAULT_LOG_LEVEL,
@@ -306,6 +380,8 @@ struct ipr_error_table_t ipr_error_table[] = {
 	"Illegal request, commands not allowed to this device"},
 	{0x05258100, 0, 0,
 	"Illegal request, command not allowed to a secondary adapter"},
+	{0x05258200, 0, 0,
+	"Illegal request, command not allowed to a non-optimized resource"},
 	{0x05260000, 0, 0,
 	"Illegal request, invalid field in parameter list"},
 	{0x05260100, 0, 0,
@@ -468,7 +544,10 @@ static void ipr_trc_hook(struct ipr_cmnd *ipr_cmd,
 	trace_entry->time = jiffies;
 	trace_entry->op_code = ipr_cmd->ioarcb.cmd_pkt.cdb[0];
 	trace_entry->type = type;
-	trace_entry->ata_op_code = ipr_cmd->ioarcb.add_data.u.regs.command;
+	if (ipr_cmd->ioa_cfg->sis64)
+		trace_entry->ata_op_code = ipr_cmd->i.ata_ioadl.regs.command;
+	else
+		trace_entry->ata_op_code = ipr_cmd->ioarcb.u.add_data.u.regs.command;
 	trace_entry->cmd_index = ipr_cmd->cmd_index & 0xff;
 	trace_entry->res_handle = ipr_cmd->ioarcb.res_handle;
 	trace_entry->u.add_data = add_data;
@@ -488,16 +567,23 @@ static void ipr_reinit_ipr_cmnd(struct ipr_cmnd *ipr_cmd)
 {
 	struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
 	struct ipr_ioasa *ioasa = &ipr_cmd->ioasa;
-	dma_addr_t dma_addr = be32_to_cpu(ioarcb->ioarcb_host_pci_addr);
+	dma_addr_t dma_addr = ipr_cmd->dma_addr;
 
 	memset(&ioarcb->cmd_pkt, 0, sizeof(struct ipr_cmd_pkt));
-	ioarcb->write_data_transfer_length = 0;
+	ioarcb->data_transfer_length = 0;
 	ioarcb->read_data_transfer_length = 0;
-	ioarcb->write_ioadl_len = 0;
+	ioarcb->ioadl_len = 0;
 	ioarcb->read_ioadl_len = 0;
-	ioarcb->write_ioadl_addr =
-		cpu_to_be32(dma_addr + offsetof(struct ipr_cmnd, ioadl));
-	ioarcb->read_ioadl_addr = ioarcb->write_ioadl_addr;
+
+	if (ipr_cmd->ioa_cfg->sis64)
+		ioarcb->u.sis64_addr_data.data_ioadl_addr =
+			cpu_to_be64(dma_addr + offsetof(struct ipr_cmnd, i.ioadl64));
+	else {
+		ioarcb->write_ioadl_addr =
+			cpu_to_be32(dma_addr + offsetof(struct ipr_cmnd, i.ioadl));
+		ioarcb->read_ioadl_addr = ioarcb->write_ioadl_addr;
+	}
+
 	ioasa->ioasc = 0;
 	ioasa->residual_data_len = 0;
 	ioasa->u.gata.status = 0;
@@ -562,10 +648,15 @@ static void ipr_mask_and_clear_interrupts(struct ipr_ioa_cfg *ioa_cfg,
 	ioa_cfg->allow_interrupts = 0;
 
 	/* Set interrupt mask to stop all new interrupts */
-	writel(~0, ioa_cfg->regs.set_interrupt_mask_reg);
+	if (ioa_cfg->sis64)
+		writeq(~0, ioa_cfg->regs.set_interrupt_mask_reg);
+	else
+		writel(~0, ioa_cfg->regs.set_interrupt_mask_reg);
 
 	/* Clear any pending interrupts */
-	writel(clr_ints, ioa_cfg->regs.clr_interrupt_reg);
+	if (ioa_cfg->sis64)
+		writel(~0, ioa_cfg->regs.clr_interrupt_reg);
+	writel(clr_ints, ioa_cfg->regs.clr_interrupt_reg32);
 	int_reg = readl(ioa_cfg->regs.sense_interrupt_reg);
 }
 
@@ -693,6 +784,35 @@ static void ipr_fail_all_ops(struct ipr_ioa_cfg *ioa_cfg)
 }
 
 /**
+ * ipr_send_command -  Send driver initiated requests.
+ * @ipr_cmd:		ipr command struct
+ *
+ * This function sends a command to the adapter using the correct write call.
+ * In the case of sis64, calculate the ioarcb size required. Then or in the
+ * appropriate bits.
+ *
+ * Return value:
+ * 	none
+ **/
+static void ipr_send_command(struct ipr_cmnd *ipr_cmd)
+{
+	struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
+	dma_addr_t send_dma_addr = ipr_cmd->dma_addr;
+
+	if (ioa_cfg->sis64) {
+		/* The default size is 256 bytes */
+		send_dma_addr |= 0x1;
+
+		/* If the number of ioadls * size of ioadl > 128 bytes,
+		   then use a 512 byte ioarcb */
+		if (ipr_cmd->dma_use_sg * sizeof(struct ipr_ioadl64_desc) > 128 )
+			send_dma_addr |= 0x4;
+		writeq(send_dma_addr, ioa_cfg->regs.ioarrin_reg);
+	} else
+		writel(send_dma_addr, ioa_cfg->regs.ioarrin_reg);
+}
+
+/**
  * ipr_do_req -  Send driver initiated requests.
  * @ipr_cmd:		ipr command struct
  * @done:			done function
@@ -724,8 +844,8 @@ static void ipr_do_req(struct ipr_cmnd *ipr_cmd,
 	ipr_trc_hook(ipr_cmd, IPR_TRACE_START, 0);
 
 	mb();
-	writel(be32_to_cpu(ipr_cmd->ioarcb.ioarcb_host_pci_addr),
-	       ioa_cfg->regs.ioarrin_reg);
+
+	ipr_send_command(ipr_cmd);
 }
 
 /**
@@ -747,6 +867,51 @@ static void ipr_internal_cmd_done(struct ipr_cmnd *ipr_cmd)
 }
 
 /**
+ * ipr_init_ioadl - initialize the ioadl for the correct SIS type
+ * @ipr_cmd:	ipr command struct
+ * @dma_addr:	dma address
+ * @len:	transfer length
+ * @flags:	ioadl flag value
+ *
+ * This function initializes an ioadl in the case where there is only a single
+ * descriptor.
+ *
+ * Return value:
+ * 	nothing
+ **/
+static void ipr_init_ioadl(struct ipr_cmnd *ipr_cmd, dma_addr_t dma_addr,
+			   u32 len, int flags)
+{
+	struct ipr_ioadl_desc *ioadl = ipr_cmd->i.ioadl;
+	struct ipr_ioadl64_desc *ioadl64 = ipr_cmd->i.ioadl64;
+
+	ipr_cmd->dma_use_sg = 1;
+
+	if (ipr_cmd->ioa_cfg->sis64) {
+		ioadl64->flags = cpu_to_be32(flags);
+		ioadl64->data_len = cpu_to_be32(len);
+		ioadl64->address = cpu_to_be64(dma_addr);
+
+		ipr_cmd->ioarcb.ioadl_len =
+		       	cpu_to_be32(sizeof(struct ipr_ioadl64_desc));
+		ipr_cmd->ioarcb.data_transfer_length = cpu_to_be32(len);
+	} else {
+		ioadl->flags_and_data_len = cpu_to_be32(flags | len);
+		ioadl->address = cpu_to_be32(dma_addr);
+
+		if (flags == IPR_IOADL_FLAGS_READ_LAST) {
+			ipr_cmd->ioarcb.read_ioadl_len =
+				cpu_to_be32(sizeof(struct ipr_ioadl_desc));
+			ipr_cmd->ioarcb.read_data_transfer_length = cpu_to_be32(len);
+		} else {
+			ipr_cmd->ioarcb.ioadl_len =
+			       	cpu_to_be32(sizeof(struct ipr_ioadl_desc));
+			ipr_cmd->ioarcb.data_transfer_length = cpu_to_be32(len);
+		}
+	}
+}
+
+/**
  * ipr_send_blocking_cmd - Send command and sleep on its completion.
  * @ipr_cmd:	ipr command struct
  * @timeout_func:	function to invoke if command times out
@@ -803,11 +968,8 @@ static void ipr_send_hcam(struct ipr_ioa_cfg *ioa_cfg, u8 type,
 		ioarcb->cmd_pkt.cdb[7] = (sizeof(hostrcb->hcam) >> 8) & 0xff;
 		ioarcb->cmd_pkt.cdb[8] = sizeof(hostrcb->hcam) & 0xff;
 
-		ioarcb->read_data_transfer_length = cpu_to_be32(sizeof(hostrcb->hcam));
-		ioarcb->read_ioadl_len = cpu_to_be32(sizeof(struct ipr_ioadl_desc));
-		ipr_cmd->ioadl[0].flags_and_data_len =
-			cpu_to_be32(IPR_IOADL_FLAGS_READ_LAST | sizeof(hostrcb->hcam));
-		ipr_cmd->ioadl[0].address = cpu_to_be32(hostrcb->hostrcb_dma);
+		ipr_init_ioadl(ipr_cmd, hostrcb->hostrcb_dma,
+			       sizeof(hostrcb->hcam), IPR_IOADL_FLAGS_READ_LAST);
 
 		if (type == IPR_HCAM_CDB_OP_CODE_CONFIG_CHANGE)
 			ipr_cmd->done = ipr_process_ccn;
@@ -817,22 +979,54 @@ static void ipr_send_hcam(struct ipr_ioa_cfg *ioa_cfg, u8 type,
 		ipr_trc_hook(ipr_cmd, IPR_TRACE_START, IPR_IOA_RES_ADDR);
 
 		mb();
-		writel(be32_to_cpu(ipr_cmd->ioarcb.ioarcb_host_pci_addr),
-		       ioa_cfg->regs.ioarrin_reg);
+
+		ipr_send_command(ipr_cmd);
 	} else {
 		list_add_tail(&hostrcb->queue, &ioa_cfg->hostrcb_free_q);
 	}
 }
 
 /**
+ * ipr_update_ata_class - Update the ata class in the resource entry
+ * @res:	resource entry struct
+ * @proto:	cfgte device bus protocol value
+ *
+ * Return value:
+ * 	none
+ **/
+static void ipr_update_ata_class(struct ipr_resource_entry *res, unsigned int proto)
+{
+	switch(proto) {
+	case IPR_PROTO_SATA:
+	case IPR_PROTO_SAS_STP:
+		res->ata_class = ATA_DEV_ATA;
+		break;
+	case IPR_PROTO_SATA_ATAPI:
+	case IPR_PROTO_SAS_STP_ATAPI:
+		res->ata_class = ATA_DEV_ATAPI;
+		break;
+	default:
+		res->ata_class = ATA_DEV_UNKNOWN;
+		break;
+	};
+}
+
+/**
  * ipr_init_res_entry - Initialize a resource entry struct.
  * @res:	resource entry struct
+ * @cfgtew:	config table entry wrapper struct
  *
  * Return value:
  * 	none
  **/
-static void ipr_init_res_entry(struct ipr_resource_entry *res)
+static void ipr_init_res_entry(struct ipr_resource_entry *res,
+			       struct ipr_config_table_entry_wrapper *cfgtew)
 {
+	int found = 0;
+	unsigned int proto;
+	struct ipr_ioa_cfg *ioa_cfg = res->ioa_cfg;
+	struct ipr_resource_entry *gscsi_res = NULL;
+
 	res->needs_sync_complete = 0;
 	res->in_erp = 0;
 	res->add_to_ml = 0;
@@ -840,6 +1034,205 @@ static void ipr_init_res_entry(struct ipr_resource_entry *res)
 	res->resetting_device = 0;
 	res->sdev = NULL;
 	res->sata_port = NULL;
+
+	if (ioa_cfg->sis64) {
+		proto = cfgtew->u.cfgte64->proto;
+		res->res_flags = cfgtew->u.cfgte64->res_flags;
+		res->qmodel = IPR_QUEUEING_MODEL64(res);
+		res->type = cfgtew->u.cfgte64->res_type & 0x0f;
+
+		memcpy(res->res_path, &cfgtew->u.cfgte64->res_path,
+			sizeof(res->res_path));
+
+		res->bus = 0;
+		res->lun = scsilun_to_int(&res->dev_lun);
+
+		if (res->type == IPR_RES_TYPE_GENERIC_SCSI) {
+			list_for_each_entry(gscsi_res, &ioa_cfg->used_res_q, queue) {
+				if (gscsi_res->dev_id == cfgtew->u.cfgte64->dev_id) {
+					found = 1;
+					res->target = gscsi_res->target;
+					break;
+				}
+			}
+			if (!found) {
+				res->target = find_first_zero_bit(ioa_cfg->target_ids,
+								  ioa_cfg->max_devs_supported);
+				set_bit(res->target, ioa_cfg->target_ids);
+			}
+
+			memcpy(&res->dev_lun.scsi_lun, &cfgtew->u.cfgte64->lun,
+				sizeof(res->dev_lun.scsi_lun));
+		} else if (res->type == IPR_RES_TYPE_IOAFP) {
+			res->bus = IPR_IOAFP_VIRTUAL_BUS;
+			res->target = 0;
+		} else if (res->type == IPR_RES_TYPE_ARRAY) {
+			res->bus = IPR_ARRAY_VIRTUAL_BUS;
+			res->target = find_first_zero_bit(ioa_cfg->array_ids,
+							  ioa_cfg->max_devs_supported);
+			set_bit(res->target, ioa_cfg->array_ids);
+		} else if (res->type == IPR_RES_TYPE_VOLUME_SET) {
+			res->bus = IPR_VSET_VIRTUAL_BUS;
+			res->target = find_first_zero_bit(ioa_cfg->vset_ids,
+							  ioa_cfg->max_devs_supported);
+			set_bit(res->target, ioa_cfg->vset_ids);
+		} else {
+			res->target = find_first_zero_bit(ioa_cfg->target_ids,
+							  ioa_cfg->max_devs_supported);
+			set_bit(res->target, ioa_cfg->target_ids);
+		}
+	} else {
+		proto = cfgtew->u.cfgte->proto;
+		res->qmodel = IPR_QUEUEING_MODEL(res);
+		res->flags = cfgtew->u.cfgte->flags;
+		if (res->flags & IPR_IS_IOA_RESOURCE)
+			res->type = IPR_RES_TYPE_IOAFP;
+		else
+			res->type = cfgtew->u.cfgte->rsvd_subtype & 0x0f;
+
+		res->bus = cfgtew->u.cfgte->res_addr.bus;
+		res->target = cfgtew->u.cfgte->res_addr.target;
+		res->lun = cfgtew->u.cfgte->res_addr.lun;
+	}
+
+	ipr_update_ata_class(res, proto);
+}
+
+/**
+ * ipr_is_same_device - Determine if two devices are the same.
+ * @res:	resource entry struct
+ * @cfgtew:	config table entry wrapper struct
+ *
+ * Return value:
+ * 	1 if the devices are the same / 0 otherwise
+ **/
+static int ipr_is_same_device(struct ipr_resource_entry *res,
+			      struct ipr_config_table_entry_wrapper *cfgtew)
+{
+	if (res->ioa_cfg->sis64) {
+		if (!memcmp(&res->dev_id, &cfgtew->u.cfgte64->dev_id,
+					sizeof(cfgtew->u.cfgte64->dev_id)) &&
+			!memcmp(&res->lun, &cfgtew->u.cfgte64->lun,
+					sizeof(cfgtew->u.cfgte64->lun))) {
+			return 1;
+		}
+	} else {
+		if (res->bus == cfgtew->u.cfgte->res_addr.bus &&
+		    res->target == cfgtew->u.cfgte->res_addr.target &&
+		    res->lun == cfgtew->u.cfgte->res_addr.lun)
+			return 1;
+	}
+
+	return 0;
+}
+
+/**
+ * ipr_format_resource_path - Format the resource path for printing.
+ * @res_path:	resource path
+ * @buf:	buffer
+ *
+ * Return value:
+ * 	pointer to buffer
+ **/
+static char *ipr_format_resource_path(u8 *res_path, char *buffer)
+{
+	int i;
+
+	sprintf(buffer, "%02X", res_path[0]);
+	for (i=1; res_path[i] != 0xff; i++)
+		sprintf(buffer, "%s-%02X", buffer, res_path[i]);
+
+	return buffer;
+}
+
+/**
+ * ipr_update_res_entry - Update the resource entry.
+ * @res:	resource entry struct
+ * @cfgtew:	config table entry wrapper struct
+ *
+ * Return value:
+ *      none
+ **/
+static void ipr_update_res_entry(struct ipr_resource_entry *res,
+				 struct ipr_config_table_entry_wrapper *cfgtew)
+{
+	char buffer[IPR_MAX_RES_PATH_LENGTH];
+	unsigned int proto;
+	int new_path = 0;
+
+	if (res->ioa_cfg->sis64) {
+		res->flags = cfgtew->u.cfgte64->flags;
+		res->res_flags = cfgtew->u.cfgte64->res_flags;
+		res->type = cfgtew->u.cfgte64->res_type & 0x0f;
+
+		memcpy(&res->std_inq_data, &cfgtew->u.cfgte64->std_inq_data,
+			sizeof(struct ipr_std_inq_data));
+
+		res->qmodel = IPR_QUEUEING_MODEL64(res);
+		proto = cfgtew->u.cfgte64->proto;
+		res->res_handle = cfgtew->u.cfgte64->res_handle;
+		res->dev_id = cfgtew->u.cfgte64->dev_id;
+
+		memcpy(&res->dev_lun.scsi_lun, &cfgtew->u.cfgte64->lun,
+			sizeof(res->dev_lun.scsi_lun));
+
+		if (memcmp(res->res_path, &cfgtew->u.cfgte64->res_path,
+					sizeof(res->res_path))) {
+			memcpy(res->res_path, &cfgtew->u.cfgte64->res_path,
+				sizeof(res->res_path));
+			new_path = 1;
+		}
+
+		if (res->sdev && new_path)
+			sdev_printk(KERN_INFO, res->sdev, "Resource path: %s\n",
+				    ipr_format_resource_path(&res->res_path[0], &buffer[0]));
+	} else {
+		res->flags = cfgtew->u.cfgte->flags;
+		if (res->flags & IPR_IS_IOA_RESOURCE)
+			res->type = IPR_RES_TYPE_IOAFP;
+		else
+			res->type = cfgtew->u.cfgte->rsvd_subtype & 0x0f;
+
+		memcpy(&res->std_inq_data, &cfgtew->u.cfgte->std_inq_data,
+			sizeof(struct ipr_std_inq_data));
+
+		res->qmodel = IPR_QUEUEING_MODEL(res);
+		proto = cfgtew->u.cfgte->proto;
+		res->res_handle = cfgtew->u.cfgte->res_handle;
+	}
+
+	ipr_update_ata_class(res, proto);
+}
+
+/**
+ * ipr_clear_res_target - Clear the bit in the bit map representing the target
+ * 			  for the resource.
+ * @res:	resource entry struct
+ * @cfgtew:	config table entry wrapper struct
+ *
+ * Return value:
+ *      none
+ **/
+static void ipr_clear_res_target(struct ipr_resource_entry *res)
+{
+	struct ipr_resource_entry *gscsi_res = NULL;
+	struct ipr_ioa_cfg *ioa_cfg = res->ioa_cfg;
+
+	if (!ioa_cfg->sis64)
+		return;
+
+	if (res->bus == IPR_ARRAY_VIRTUAL_BUS)
+		clear_bit(res->target, ioa_cfg->array_ids);
+	else if (res->bus == IPR_VSET_VIRTUAL_BUS)
+		clear_bit(res->target, ioa_cfg->vset_ids);
+	else if (res->bus == 0 && res->type == IPR_RES_TYPE_GENERIC_SCSI) {
+		list_for_each_entry(gscsi_res, &ioa_cfg->used_res_q, queue)
+			if (gscsi_res->dev_id == res->dev_id && gscsi_res != res)
+				return;
+		clear_bit(res->target, ioa_cfg->target_ids);
+
+	} else if (res->bus == 0)
+		clear_bit(res->target, ioa_cfg->target_ids);
 }
 
 /**
@@ -851,17 +1244,24 @@ static void ipr_init_res_entry(struct ipr_resource_entry *res)
  * 	none
  **/
 static void ipr_handle_config_change(struct ipr_ioa_cfg *ioa_cfg,
-			      struct ipr_hostrcb *hostrcb)
+				     struct ipr_hostrcb *hostrcb)
 {
 	struct ipr_resource_entry *res = NULL;
-	struct ipr_config_table_entry *cfgte;
+	struct ipr_config_table_entry_wrapper cfgtew;
+	__be32 cc_res_handle;
+
 	u32 is_ndn = 1;
 
-	cfgte = &hostrcb->hcam.u.ccn.cfgte;
+	if (ioa_cfg->sis64) {
+		cfgtew.u.cfgte64 = &hostrcb->hcam.u.ccn.u.cfgte64;
+		cc_res_handle = cfgtew.u.cfgte64->res_handle;
+	} else {
+		cfgtew.u.cfgte = &hostrcb->hcam.u.ccn.u.cfgte;
+		cc_res_handle = cfgtew.u.cfgte->res_handle;
+	}
 
 	list_for_each_entry(res, &ioa_cfg->used_res_q, queue) {
-		if (!memcmp(&res->cfgte.res_addr, &cfgte->res_addr,
-			    sizeof(cfgte->res_addr))) {
+		if (res->res_handle == cc_res_handle) {
 			is_ndn = 0;
 			break;
 		}
@@ -879,20 +1279,22 @@ static void ipr_handle_config_change(struct ipr_ioa_cfg *ioa_cfg,
 				 struct ipr_resource_entry, queue);
 
 		list_del(&res->queue);
-		ipr_init_res_entry(res);
+		ipr_init_res_entry(res, &cfgtew);
 		list_add_tail(&res->queue, &ioa_cfg->used_res_q);
 	}
 
-	memcpy(&res->cfgte, cfgte, sizeof(struct ipr_config_table_entry));
+	ipr_update_res_entry(res, &cfgtew);
 
 	if (hostrcb->hcam.notify_type == IPR_HOST_RCB_NOTIF_TYPE_REM_ENTRY) {
 		if (res->sdev) {
 			res->del_from_ml = 1;
-			res->cfgte.res_handle = IPR_INVALID_RES_HANDLE;
+			res->res_handle = IPR_INVALID_RES_HANDLE;
 			if (ioa_cfg->allow_ml_add_del)
 				schedule_work(&ioa_cfg->work_q);
-		} else
+		} else {
+			ipr_clear_res_target(res);
 			list_move_tail(&res->queue, &ioa_cfg->free_res_q);
+		}
 	} else if (!res->sdev) {
 		res->add_to_ml = 1;
 		if (ioa_cfg->allow_ml_add_del)
@@ -1044,8 +1446,12 @@ static void ipr_log_ext_vpd(struct ipr_ext_vpd *vpd)
 static void ipr_log_enhanced_cache_error(struct ipr_ioa_cfg *ioa_cfg,
 					 struct ipr_hostrcb *hostrcb)
 {
-	struct ipr_hostrcb_type_12_error *error =
-		&hostrcb->hcam.u.error.u.type_12_error;
+	struct ipr_hostrcb_type_12_error *error;
+
+	if (ioa_cfg->sis64)
+		error = &hostrcb->hcam.u.error64.u.type_12_error;
+	else
+		error = &hostrcb->hcam.u.error.u.type_12_error;
 
 	ipr_err("-----Current Configuration-----\n");
 	ipr_err("Cache Directory Card Information:\n");
@@ -1138,6 +1544,48 @@ static void ipr_log_enhanced_config_error(struct ipr_ioa_cfg *ioa_cfg,
 }
 
 /**
+ * ipr_log_sis64_config_error - Log a device error.
+ * @ioa_cfg:	ioa config struct
+ * @hostrcb:	hostrcb struct
+ *
+ * Return value:
+ * 	none
+ **/
+static void ipr_log_sis64_config_error(struct ipr_ioa_cfg *ioa_cfg,
+				       struct ipr_hostrcb *hostrcb)
+{
+	int errors_logged, i;
+	struct ipr_hostrcb64_device_data_entry_enhanced *dev_entry;
+	struct ipr_hostrcb_type_23_error *error;
+	char buffer[IPR_MAX_RES_PATH_LENGTH];
+
+	error = &hostrcb->hcam.u.error64.u.type_23_error;
+	errors_logged = be32_to_cpu(error->errors_logged);
+
+	ipr_err("Device Errors Detected/Logged: %d/%d\n",
+		be32_to_cpu(error->errors_detected), errors_logged);
+
+	dev_entry = error->dev;
+
+	for (i = 0; i < errors_logged; i++, dev_entry++) {
+		ipr_err_separator;
+
+		ipr_err("Device %d : %s", i + 1,
+			 ipr_format_resource_path(&dev_entry->res_path[0], &buffer[0]));
+		ipr_log_ext_vpd(&dev_entry->vpd);
+
+		ipr_err("-----New Device Information-----\n");
+		ipr_log_ext_vpd(&dev_entry->new_vpd);
+
+		ipr_err("Cache Directory Card Information:\n");
+		ipr_log_ext_vpd(&dev_entry->ioa_last_with_dev_vpd);
+
+		ipr_err("Adapter Card Information:\n");
+		ipr_log_ext_vpd(&dev_entry->cfc_last_with_dev_vpd);
+	}
+}
+
+/**
  * ipr_log_config_error - Log a configuration error.
  * @ioa_cfg:	ioa config struct
  * @hostrcb:	hostrcb struct
@@ -1331,7 +1779,11 @@ static void ipr_log_enhanced_dual_ioa_error(struct ipr_ioa_cfg *ioa_cfg,
 {
 	struct ipr_hostrcb_type_17_error *error;
 
-	error = &hostrcb->hcam.u.error.u.type_17_error;
+	if (ioa_cfg->sis64)
+		error = &hostrcb->hcam.u.error64.u.type_17_error;
+	else
+		error = &hostrcb->hcam.u.error.u.type_17_error;
+
 	error->failure_reason[sizeof(error->failure_reason) - 1] = '\0';
 	strim(error->failure_reason);
 
@@ -1438,6 +1890,42 @@ static void ipr_log_fabric_path(struct ipr_hostrcb *hostrcb,
 		fabric->ioa_port, fabric->cascaded_expander, fabric->phy);
 }
 
+/**
+ * ipr_log64_fabric_path - Log a fabric path error
+ * @hostrcb:	hostrcb struct
+ * @fabric:		fabric descriptor
+ *
+ * Return value:
+ * 	none
+ **/
+static void ipr_log64_fabric_path(struct ipr_hostrcb *hostrcb,
+				  struct ipr_hostrcb64_fabric_desc *fabric)
+{
+	int i, j;
+	u8 path_state = fabric->path_state;
+	u8 active = path_state & IPR_PATH_ACTIVE_MASK;
+	u8 state = path_state & IPR_PATH_STATE_MASK;
+	char buffer[IPR_MAX_RES_PATH_LENGTH];
+
+	for (i = 0; i < ARRAY_SIZE(path_active_desc); i++) {
+		if (path_active_desc[i].active != active)
+			continue;
+
+		for (j = 0; j < ARRAY_SIZE(path_state_desc); j++) {
+			if (path_state_desc[j].state != state)
+				continue;
+
+			ipr_hcam_err(hostrcb, "%s %s: Resource Path=%s\n",
+				     path_active_desc[i].desc, path_state_desc[j].desc,
+				     ipr_format_resource_path(&fabric->res_path[0], &buffer[0]));
+			return;
+		}
+	}
+
+	ipr_err("Path state=%02X Resource Path=%s\n", path_state,
+		ipr_format_resource_path(&fabric->res_path[0], &buffer[0]));
+}
+
 static const struct {
 	u8 type;
 	char *desc;
@@ -1547,6 +2035,49 @@ static void ipr_log_path_elem(struct ipr_hostrcb *hostrcb,
 }
 
 /**
+ * ipr_log64_path_elem - Log a fabric path element.
+ * @hostrcb:	hostrcb struct
+ * @cfg:		fabric path element struct
+ *
+ * Return value:
+ * 	none
+ **/
+static void ipr_log64_path_elem(struct ipr_hostrcb *hostrcb,
+				struct ipr_hostrcb64_config_element *cfg)
+{
+	int i, j;
+	u8 desc_id = cfg->descriptor_id & IPR_DESCRIPTOR_MASK;
+	u8 type = cfg->type_status & IPR_PATH_CFG_TYPE_MASK;
+	u8 status = cfg->type_status & IPR_PATH_CFG_STATUS_MASK;
+	char buffer[IPR_MAX_RES_PATH_LENGTH];
+
+	if (type == IPR_PATH_CFG_NOT_EXIST || desc_id != IPR_DESCRIPTOR_SIS64)
+		return;
+
+	for (i = 0; i < ARRAY_SIZE(path_type_desc); i++) {
+		if (path_type_desc[i].type != type)
+			continue;
+
+		for (j = 0; j < ARRAY_SIZE(path_status_desc); j++) {
+			if (path_status_desc[j].status != status)
+				continue;
+
+			ipr_hcam_err(hostrcb, "%s %s: Resource Path=%s, Link rate=%s, WWN=%08X%08X\n",
+				     path_status_desc[j].desc, path_type_desc[i].desc,
+				     ipr_format_resource_path(&cfg->res_path[0], &buffer[0]),
+				     link_rate[cfg->link_rate & IPR_PHY_LINK_RATE_MASK],
+				     be32_to_cpu(cfg->wwid[0]), be32_to_cpu(cfg->wwid[1]));
+			return;
+		}
+	}
+	ipr_hcam_err(hostrcb, "Path element=%02X: Resource Path=%s, Link rate=%s "
+		     "WWN=%08X%08X\n", cfg->type_status,
+		     ipr_format_resource_path(&cfg->res_path[0], &buffer[0]),
+		     link_rate[cfg->link_rate & IPR_PHY_LINK_RATE_MASK],
+		     be32_to_cpu(cfg->wwid[0]), be32_to_cpu(cfg->wwid[1]));
+}
+
+/**
  * ipr_log_fabric_error - Log a fabric error.
  * @ioa_cfg:	ioa config struct
  * @hostrcb:	hostrcb struct
@@ -1584,6 +2115,96 @@ static void ipr_log_fabric_error(struct ipr_ioa_cfg *ioa_cfg,
 }
 
 /**
+ * ipr_log_sis64_array_error - Log a sis64 array error.
+ * @ioa_cfg:	ioa config struct
+ * @hostrcb:	hostrcb struct
+ *
+ * Return value:
+ * 	none
+ **/
+static void ipr_log_sis64_array_error(struct ipr_ioa_cfg *ioa_cfg,
+				      struct ipr_hostrcb *hostrcb)
+{
+	int i, num_entries;
+	struct ipr_hostrcb_type_24_error *error;
+	struct ipr_hostrcb64_array_data_entry *array_entry;
+	char buffer[IPR_MAX_RES_PATH_LENGTH];
+	const u8 zero_sn[IPR_SERIAL_NUM_LEN] = { [0 ... IPR_SERIAL_NUM_LEN-1] = '0' };
+
+	error = &hostrcb->hcam.u.error64.u.type_24_error;
+
+	ipr_err_separator;
+
+	ipr_err("RAID %s Array Configuration: %s\n",
+		error->protection_level,
+		ipr_format_resource_path(&error->last_res_path[0], &buffer[0]));
+
+	ipr_err_separator;
+
+	array_entry = error->array_member;
+	num_entries = min_t(u32, be32_to_cpu(error->num_entries),
+			    sizeof(error->array_member));
+
+	for (i = 0; i < num_entries; i++, array_entry++) {
+
+		if (!memcmp(array_entry->vpd.vpd.sn, zero_sn, IPR_SERIAL_NUM_LEN))
+			continue;
+
+		if (error->exposed_mode_adn == i)
+			ipr_err("Exposed Array Member %d:\n", i);
+		else
+			ipr_err("Array Member %d:\n", i);
+
+		ipr_err("Array Member %d:\n", i);
+		ipr_log_ext_vpd(&array_entry->vpd);
+		ipr_err("Current Location: %s",
+			 ipr_format_resource_path(&array_entry->res_path[0], &buffer[0]));
+		ipr_err("Expected Location: %s",
+			 ipr_format_resource_path(&array_entry->expected_res_path[0], &buffer[0]));
+
+		ipr_err_separator;
+	}
+}
+
+/**
+ * ipr_log_sis64_fabric_error - Log a sis64 fabric error.
+ * @ioa_cfg:	ioa config struct
+ * @hostrcb:	hostrcb struct
+ *
+ * Return value:
+ * 	none
+ **/
+static void ipr_log_sis64_fabric_error(struct ipr_ioa_cfg *ioa_cfg,
+				       struct ipr_hostrcb *hostrcb)
+{
+	struct ipr_hostrcb_type_30_error *error;
+	struct ipr_hostrcb64_fabric_desc *fabric;
+	struct ipr_hostrcb64_config_element *cfg;
+	int i, add_len;
+
+	error = &hostrcb->hcam.u.error64.u.type_30_error;
+
+	error->failure_reason[sizeof(error->failure_reason) - 1] = '\0';
+	ipr_hcam_err(hostrcb, "%s\n", error->failure_reason);
+
+	add_len = be32_to_cpu(hostrcb->hcam.length) -
+		(offsetof(struct ipr_hostrcb64_error, u) +
+		 offsetof(struct ipr_hostrcb_type_30_error, desc));
+
+	for (i = 0, fabric = error->desc; i < error->num_entries; i++) {
+		ipr_log64_fabric_path(hostrcb, fabric);
+		for_each_fabric_cfg(fabric, cfg)
+			ipr_log64_path_elem(hostrcb, cfg);
+
+		add_len -= be16_to_cpu(fabric->length);
+		fabric = (struct ipr_hostrcb64_fabric_desc *)
+			((unsigned long)fabric + be16_to_cpu(fabric->length));
+	}
+
+	ipr_log_hex_data(ioa_cfg, (u32 *)fabric, add_len);
+}
+
+/**
  * ipr_log_generic_error - Log an adapter error.
  * @ioa_cfg:	ioa config struct
  * @hostrcb:	hostrcb struct
@@ -1642,13 +2263,16 @@ static void ipr_handle_log_data(struct ipr_ioa_cfg *ioa_cfg,
 	if (hostrcb->hcam.notifications_lost == IPR_HOST_RCB_NOTIFICATIONS_LOST)
 		dev_err(&ioa_cfg->pdev->dev, "Error notifications lost\n");
 
-	ioasc = be32_to_cpu(hostrcb->hcam.u.error.failing_dev_ioasc);
+	if (ioa_cfg->sis64)
+		ioasc = be32_to_cpu(hostrcb->hcam.u.error64.fd_ioasc);
+	else
+		ioasc = be32_to_cpu(hostrcb->hcam.u.error.fd_ioasc);
 
-	if (ioasc == IPR_IOASC_BUS_WAS_RESET ||
-	    ioasc == IPR_IOASC_BUS_WAS_RESET_BY_OTHER) {
+	if (!ioa_cfg->sis64 && (ioasc == IPR_IOASC_BUS_WAS_RESET ||
+	    ioasc == IPR_IOASC_BUS_WAS_RESET_BY_OTHER)) {
 		/* Tell the midlayer we had a bus reset so it will handle the UA properly */
 		scsi_report_bus_reset(ioa_cfg->host,
-				      hostrcb->hcam.u.error.failing_dev_res_addr.bus);
+				      hostrcb->hcam.u.error.fd_res_addr.bus);
 	}
 
 	error_index = ipr_get_error(ioasc);
@@ -1696,6 +2320,16 @@ static void ipr_handle_log_data(struct ipr_ioa_cfg *ioa_cfg,
 	case IPR_HOST_RCB_OVERLAY_ID_20:
 		ipr_log_fabric_error(ioa_cfg, hostrcb);
 		break;
+	case IPR_HOST_RCB_OVERLAY_ID_23:
+		ipr_log_sis64_config_error(ioa_cfg, hostrcb);
+		break;
+	case IPR_HOST_RCB_OVERLAY_ID_24:
+	case IPR_HOST_RCB_OVERLAY_ID_26:
+		ipr_log_sis64_array_error(ioa_cfg, hostrcb);
+		break;
+	case IPR_HOST_RCB_OVERLAY_ID_30:
+		ipr_log_sis64_fabric_error(ioa_cfg, hostrcb);
+		break;
 	case IPR_HOST_RCB_OVERLAY_ID_1:
 	case IPR_HOST_RCB_OVERLAY_ID_DEFAULT:
 	default:
@@ -1720,7 +2354,12 @@ static void ipr_process_error(struct ipr_cmnd *ipr_cmd)
 	struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
 	struct ipr_hostrcb *hostrcb = ipr_cmd->u.hostrcb;
 	u32 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
-	u32 fd_ioasc = be32_to_cpu(hostrcb->hcam.u.error.failing_dev_ioasc);
+	u32 fd_ioasc;
+
+	if (ioa_cfg->sis64)
+		fd_ioasc = be32_to_cpu(hostrcb->hcam.u.error64.fd_ioasc);
+	else
+		fd_ioasc = be32_to_cpu(hostrcb->hcam.u.error.fd_ioasc);
 
 	list_del(&hostrcb->queue);
 	list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
@@ -1845,12 +2484,14 @@ static const struct ipr_ses_table_entry *
 ipr_find_ses_entry(struct ipr_resource_entry *res)
 {
 	int i, j, matches;
+	struct ipr_std_inq_vpids *vpids;
 	const struct ipr_ses_table_entry *ste = ipr_ses_table;
 
 	for (i = 0; i < ARRAY_SIZE(ipr_ses_table); i++, ste++) {
 		for (j = 0, matches = 0; j < IPR_PROD_ID_LEN; j++) {
 			if (ste->compare_product_id_byte[j] == 'X') {
-				if (res->cfgte.std_inq_data.vpids.product_id[j] == ste->product_id[j])
+				vpids = &res->std_inq_data.vpids;
+				if (vpids->product_id[j] == ste->product_id[j])
 					matches++;
 				else
 					break;
@@ -1885,10 +2526,10 @@ static u32 ipr_get_max_scsi_speed(struct ipr_ioa_cfg *ioa_cfg, u8 bus, u8 bus_wi
 
 	/* Loop through each config table entry in the config table buffer */
 	list_for_each_entry(res, &ioa_cfg->used_res_q, queue) {
-		if (!(IPR_IS_SES_DEVICE(res->cfgte.std_inq_data)))
+		if (!(IPR_IS_SES_DEVICE(res->std_inq_data)))
 			continue;
 
-		if (bus != res->cfgte.res_addr.bus)
+		if (bus != res->bus)
 			continue;
 
 		if (!(ste = ipr_find_ses_entry(res)))
@@ -1934,6 +2575,31 @@ static int ipr_wait_iodbg_ack(struct ipr_ioa_cfg *ioa_cfg, int max_delay)
 }
 
 /**
+ * ipr_get_sis64_dump_data_section - Dump IOA memory
+ * @ioa_cfg:			ioa config struct
+ * @start_addr:			adapter address to dump
+ * @dest:			destination kernel buffer
+ * @length_in_words:		length to dump in 4 byte words
+ *
+ * Return value:
+ * 	0 on success
+ **/
+static int ipr_get_sis64_dump_data_section(struct ipr_ioa_cfg *ioa_cfg,
+					   u32 start_addr,
+					   __be32 *dest, u32 length_in_words)
+{
+	int i;
+
+	for (i = 0; i < length_in_words; i++) {
+		writel(start_addr+(i*4), ioa_cfg->regs.dump_addr_reg);
+		*dest = cpu_to_be32(readl(ioa_cfg->regs.dump_data_reg));
+		dest++;
+	}
+
+	return 0;
+}
+
+/**
  * ipr_get_ldump_data_section - Dump IOA memory
  * @ioa_cfg:			ioa config struct
  * @start_addr:			adapter address to dump
@@ -1950,9 +2616,13 @@ static int ipr_get_ldump_data_section(struct ipr_ioa_cfg *ioa_cfg,
 	volatile u32 temp_pcii_reg;
 	int i, delay = 0;
 
+	if (ioa_cfg->sis64)
+		return ipr_get_sis64_dump_data_section(ioa_cfg, start_addr,
+						       dest, length_in_words);
+
 	/* Write IOA interrupt reg starting LDUMP state  */
 	writel((IPR_UPROCI_RESET_ALERT | IPR_UPROCI_IO_DEBUG_ALERT),
-	       ioa_cfg->regs.set_uproc_interrupt_reg);
+	       ioa_cfg->regs.set_uproc_interrupt_reg32);
 
 	/* Wait for IO debug acknowledge */
 	if (ipr_wait_iodbg_ack(ioa_cfg,
@@ -1971,7 +2641,7 @@ static int ipr_get_ldump_data_section(struct ipr_ioa_cfg *ioa_cfg,
 
 	/* Signal address valid - clear IOA Reset alert */
 	writel(IPR_UPROCI_RESET_ALERT,
-	       ioa_cfg->regs.clr_uproc_interrupt_reg);
+	       ioa_cfg->regs.clr_uproc_interrupt_reg32);
 
 	for (i = 0; i < length_in_words; i++) {
 		/* Wait for IO debug acknowledge */
@@ -1996,10 +2666,10 @@ static int ipr_get_ldump_data_section(struct ipr_ioa_cfg *ioa_cfg,
 
 	/* Signal end of block transfer. Set reset alert then clear IO debug ack */
 	writel(IPR_UPROCI_RESET_ALERT,
-	       ioa_cfg->regs.set_uproc_interrupt_reg);
+	       ioa_cfg->regs.set_uproc_interrupt_reg32);
 
 	writel(IPR_UPROCI_IO_DEBUG_ALERT,
-	       ioa_cfg->regs.clr_uproc_interrupt_reg);
+	       ioa_cfg->regs.clr_uproc_interrupt_reg32);
 
 	/* Signal dump data received - Clear IO debug Ack */
 	writel(IPR_PCII_IO_DEBUG_ACKNOWLEDGE,
@@ -2008,7 +2678,7 @@ static int ipr_get_ldump_data_section(struct ipr_ioa_cfg *ioa_cfg,
 	/* Wait for IOA to signal LDUMP exit - IOA reset alert will be cleared */
 	while (delay < IPR_LDUMP_MAX_SHORT_ACK_DELAY_IN_USEC) {
 		temp_pcii_reg =
-		    readl(ioa_cfg->regs.sense_uproc_interrupt_reg);
+		    readl(ioa_cfg->regs.sense_uproc_interrupt_reg32);
 
 		if (!(temp_pcii_reg & IPR_UPROCI_RESET_ALERT))
 			return 0;
@@ -2207,6 +2877,7 @@ static void ipr_get_ioa_dump(struct ipr_ioa_cfg *ioa_cfg, struct ipr_dump *dump)
 	u32 num_entries, start_off, end_off;
 	u32 bytes_to_copy, bytes_copied, rc;
 	struct ipr_sdt *sdt;
+	int valid = 1;
 	int i;
 
 	ENTER;
@@ -2220,7 +2891,7 @@ static void ipr_get_ioa_dump(struct ipr_ioa_cfg *ioa_cfg, struct ipr_dump *dump)
 
 	start_addr = readl(ioa_cfg->ioa_mailbox);
 
-	if (!ipr_sdt_is_fmt2(start_addr)) {
+	if (!ioa_cfg->sis64 && !ipr_sdt_is_fmt2(start_addr)) {
 		dev_err(&ioa_cfg->pdev->dev,
 			"Invalid dump table format: %lx\n", start_addr);
 		spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
@@ -2249,7 +2920,6 @@ static void ipr_get_ioa_dump(struct ipr_ioa_cfg *ioa_cfg, struct ipr_dump *dump)
 
 	/* IOA Dump entry */
 	ipr_init_dump_entry_hdr(&ioa_dump->hdr);
-	ioa_dump->format = IPR_SDT_FMT2;
 	ioa_dump->hdr.len = 0;
 	ioa_dump->hdr.data_type = IPR_DUMP_DATA_TYPE_BINARY;
 	ioa_dump->hdr.id = IPR_DUMP_IOA_DUMP_ID;
@@ -2264,7 +2934,8 @@ static void ipr_get_ioa_dump(struct ipr_ioa_cfg *ioa_cfg, struct ipr_dump *dump)
 					sizeof(struct ipr_sdt) / sizeof(__be32));
 
 	/* Smart Dump table is ready to use and the first entry is valid */
-	if (rc || (be32_to_cpu(sdt->hdr.state) != IPR_FMT2_SDT_READY_TO_USE)) {
+	if (rc || ((be32_to_cpu(sdt->hdr.state) != IPR_FMT3_SDT_READY_TO_USE) &&
+	    (be32_to_cpu(sdt->hdr.state) != IPR_FMT2_SDT_READY_TO_USE))) {
 		dev_err(&ioa_cfg->pdev->dev,
 			"Dump of IOA failed. Dump table not valid: %d, %X.\n",
 			rc, be32_to_cpu(sdt->hdr.state));
@@ -2288,12 +2959,19 @@ static void ipr_get_ioa_dump(struct ipr_ioa_cfg *ioa_cfg, struct ipr_dump *dump)
 		}
 
 		if (sdt->entry[i].flags & IPR_SDT_VALID_ENTRY) {
-			sdt_word = be32_to_cpu(sdt->entry[i].bar_str_offset);
-			start_off = sdt_word & IPR_FMT2_MBX_ADDR_MASK;
-			end_off = be32_to_cpu(sdt->entry[i].end_offset);
-
-			if (ipr_sdt_is_fmt2(sdt_word) && sdt_word) {
-				bytes_to_copy = end_off - start_off;
+			sdt_word = be32_to_cpu(sdt->entry[i].start_token);
+			if (ioa_cfg->sis64)
+				bytes_to_copy = be32_to_cpu(sdt->entry[i].end_token);
+			else {
+				start_off = sdt_word & IPR_FMT2_MBX_ADDR_MASK;
+				end_off = be32_to_cpu(sdt->entry[i].end_token);
+
+				if (ipr_sdt_is_fmt2(sdt_word) && sdt_word)
+					bytes_to_copy = end_off - start_off;
+				else
+					valid = 0;
+			}
+			if (valid) {
 				if (bytes_to_copy > IPR_MAX_IOA_DUMP_SIZE) {
 					sdt->entry[i].flags &= ~IPR_SDT_VALID_ENTRY;
 					continue;
@@ -2422,9 +3100,9 @@ restart:
 
 	list_for_each_entry(res, &ioa_cfg->used_res_q, queue) {
 		if (res->add_to_ml) {
-			bus = res->cfgte.res_addr.bus;
-			target = res->cfgte.res_addr.target;
-			lun = res->cfgte.res_addr.lun;
+			bus = res->bus;
+			target = res->target;
+			lun = res->lun;
 			res->add_to_ml = 0;
 			spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
 			scsi_add_device(ioa_cfg->host, bus, target, lun);
@@ -2478,105 +3156,6 @@ static struct bin_attribute ipr_trace_attr = {
 };
 #endif
 
-static const struct {
-	enum ipr_cache_state state;
-	char *name;
-} cache_state [] = {
-	{ CACHE_NONE, "none" },
-	{ CACHE_DISABLED, "disabled" },
-	{ CACHE_ENABLED, "enabled" }
-};
-
-/**
- * ipr_show_write_caching - Show the write caching attribute
- * @dev:	device struct
- * @buf:	buffer
- *
- * Return value:
- *	number of bytes printed to buffer
- **/
-static ssize_t ipr_show_write_caching(struct device *dev,
-				      struct device_attribute *attr, char *buf)
-{
-	struct Scsi_Host *shost = class_to_shost(dev);
-	struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata;
-	unsigned long lock_flags = 0;
-	int i, len = 0;
-
-	spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
-	for (i = 0; i < ARRAY_SIZE(cache_state); i++) {
-		if (cache_state[i].state == ioa_cfg->cache_state) {
-			len = snprintf(buf, PAGE_SIZE, "%s\n", cache_state[i].name);
-			break;
-		}
-	}
-	spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
-	return len;
-}
-
-
-/**
- * ipr_store_write_caching - Enable/disable adapter write cache
- * @dev:	device struct
- * @buf:	buffer
- * @count:	buffer size
- *
- * This function will enable/disable adapter write cache.
- *
- * Return value:
- * 	count on success / other on failure
- **/
-static ssize_t ipr_store_write_caching(struct device *dev,
-				       struct device_attribute *attr,
-				       const char *buf, size_t count)
-{
-	struct Scsi_Host *shost = class_to_shost(dev);
-	struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata;
-	unsigned long lock_flags = 0;
-	enum ipr_cache_state new_state = CACHE_INVALID;
-	int i;
-
-	if (!capable(CAP_SYS_ADMIN))
-		return -EACCES;
-	if (ioa_cfg->cache_state == CACHE_NONE)
-		return -EINVAL;
-
-	for (i = 0; i < ARRAY_SIZE(cache_state); i++) {
-		if (!strncmp(cache_state[i].name, buf, strlen(cache_state[i].name))) {
-			new_state = cache_state[i].state;
-			break;
-		}
-	}
-
-	if (new_state != CACHE_DISABLED && new_state != CACHE_ENABLED)
-		return -EINVAL;
-
-	spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
-	if (ioa_cfg->cache_state == new_state) {
-		spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
-		return count;
-	}
-
-	ioa_cfg->cache_state = new_state;
-	dev_info(&ioa_cfg->pdev->dev, "%s adapter write cache.\n",
-		 new_state == CACHE_ENABLED ? "Enabling" : "Disabling");
-	if (!ioa_cfg->in_reset_reload)
-		ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NORMAL);
-	spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
-	wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload);
-
-	return count;
-}
-
-static struct device_attribute ipr_ioa_cache_attr = {
-	.attr = {
-		.name =		"write_cache",
-		.mode =		S_IRUGO | S_IWUSR,
-	},
-	.show = ipr_show_write_caching,
-	.store = ipr_store_write_caching
-};
-
 /**
  * ipr_show_fw_version - Show the firmware version
  * @dev:	class device struct
@@ -2976,6 +3555,37 @@ static int ipr_copy_ucode_buffer(struct ipr_sglist *sglist,
 }
 
 /**
+ * ipr_build_ucode_ioadl64 - Build a microcode download IOADL
+ * @ipr_cmd:		ipr command struct
+ * @sglist:		scatter/gather list
+ *
+ * Builds a microcode download IOA data list (IOADL).
+ *
+ **/
+static void ipr_build_ucode_ioadl64(struct ipr_cmnd *ipr_cmd,
+				    struct ipr_sglist *sglist)
+{
+	struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
+	struct ipr_ioadl64_desc *ioadl64 = ipr_cmd->i.ioadl64;
+	struct scatterlist *scatterlist = sglist->scatterlist;
+	int i;
+
+	ipr_cmd->dma_use_sg = sglist->num_dma_sg;
+	ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_WRITE_NOT_READ;
+	ioarcb->data_transfer_length = cpu_to_be32(sglist->buffer_len);
+
+	ioarcb->ioadl_len =
+		cpu_to_be32(sizeof(struct ipr_ioadl64_desc) * ipr_cmd->dma_use_sg);
+	for (i = 0; i < ipr_cmd->dma_use_sg; i++) {
+		ioadl64[i].flags = cpu_to_be32(IPR_IOADL_FLAGS_WRITE);
+		ioadl64[i].data_len = cpu_to_be32(sg_dma_len(&scatterlist[i]));
+		ioadl64[i].address = cpu_to_be64(sg_dma_address(&scatterlist[i]));
+	}
+
+	ioadl64[i-1].flags |= cpu_to_be32(IPR_IOADL_FLAGS_LAST);
+}
+
+/**
  * ipr_build_ucode_ioadl - Build a microcode download IOADL
  * @ipr_cmd:	ipr command struct
  * @sglist:		scatter/gather list
@@ -2987,14 +3597,15 @@ static void ipr_build_ucode_ioadl(struct ipr_cmnd *ipr_cmd,
 				  struct ipr_sglist *sglist)
 {
 	struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
-	struct ipr_ioadl_desc *ioadl = ipr_cmd->ioadl;
+	struct ipr_ioadl_desc *ioadl = ipr_cmd->i.ioadl;
 	struct scatterlist *scatterlist = sglist->scatterlist;
 	int i;
 
 	ipr_cmd->dma_use_sg = sglist->num_dma_sg;
 	ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_WRITE_NOT_READ;
-	ioarcb->write_data_transfer_length = cpu_to_be32(sglist->buffer_len);
-	ioarcb->write_ioadl_len =
+	ioarcb->data_transfer_length = cpu_to_be32(sglist->buffer_len);
+
+	ioarcb->ioadl_len =
 		cpu_to_be32(sizeof(struct ipr_ioadl_desc) * ipr_cmd->dma_use_sg);
 
 	for (i = 0; i < ipr_cmd->dma_use_sg; i++) {
@@ -3146,7 +3757,6 @@ static struct device_attribute *ipr_ioa_attrs[] = {
 	&ipr_ioa_state_attr,
 	&ipr_ioa_reset_attr,
 	&ipr_update_fw_attr,
-	&ipr_ioa_cache_attr,
 	NULL,
 };
 
@@ -3450,7 +4060,7 @@ static ssize_t ipr_show_adapter_handle(struct device *dev, struct device_attribu
 	spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
 	res = (struct ipr_resource_entry *)sdev->hostdata;
 	if (res)
-		len = snprintf(buf, PAGE_SIZE, "%08X\n", res->cfgte.res_handle);
+		len = snprintf(buf, PAGE_SIZE, "%08X\n", res->res_handle);
 	spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
 	return len;
 }
@@ -3463,8 +4073,43 @@ static struct device_attribute ipr_adapter_handle_attr = {
 	.show = ipr_show_adapter_handle
 };
 
+/**
+ * ipr_show_resource_path - Show the resource path for this device.
+ * @dev:	device struct
+ * @buf:	buffer
+ *
+ * Return value:
+ * 	number of bytes printed to buffer
+ **/
+static ssize_t ipr_show_resource_path(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct scsi_device *sdev = to_scsi_device(dev);
+	struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)sdev->host->hostdata;
+	struct ipr_resource_entry *res;
+	unsigned long lock_flags = 0;
+	ssize_t len = -ENXIO;
+	char buffer[IPR_MAX_RES_PATH_LENGTH];
+
+	spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
+	res = (struct ipr_resource_entry *)sdev->hostdata;
+	if (res)
+		len = snprintf(buf, PAGE_SIZE, "%s\n",
+			       ipr_format_resource_path(&res->res_path[0], &buffer[0]));
+	spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
+	return len;
+}
+
+static struct device_attribute ipr_resource_path_attr = {
+	.attr = {
+		.name = 	"resource_path",
+		.mode =		S_IRUSR,
+	},
+	.show = ipr_show_resource_path
+};
+
 static struct device_attribute *ipr_dev_attrs[] = {
 	&ipr_adapter_handle_attr,
+	&ipr_resource_path_attr,
 	NULL,
 };
 
@@ -3517,9 +4162,9 @@ static struct ipr_resource_entry *ipr_find_starget(struct scsi_target *starget)
 	struct ipr_resource_entry *res;
 
 	list_for_each_entry(res, &ioa_cfg->used_res_q, queue) {
-		if ((res->cfgte.res_addr.bus == starget->channel) &&
-		    (res->cfgte.res_addr.target == starget->id) &&
-		    (res->cfgte.res_addr.lun == 0)) {
+		if ((res->bus == starget->channel) &&
+		    (res->target == starget->id) &&
+		    (res->lun == 0)) {
 			return res;
 		}
 	}
@@ -3589,6 +4234,17 @@ static int ipr_target_alloc(struct scsi_target *starget)
 static void ipr_target_destroy(struct scsi_target *starget)
 {
 	struct ipr_sata_port *sata_port = starget->hostdata;
+	struct Scsi_Host *shost = dev_to_shost(&starget->dev);
+	struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *) shost->hostdata;
+
+	if (ioa_cfg->sis64) {
+		if (starget->channel == IPR_ARRAY_VIRTUAL_BUS)
+			clear_bit(starget->id, ioa_cfg->array_ids);
+		else if (starget->channel == IPR_VSET_VIRTUAL_BUS)
+			clear_bit(starget->id, ioa_cfg->vset_ids);
+		else if (starget->channel == 0)
+			clear_bit(starget->id, ioa_cfg->target_ids);
+	}
 
 	if (sata_port) {
 		starget->hostdata = NULL;
@@ -3610,9 +4266,9 @@ static struct ipr_resource_entry *ipr_find_sdev(struct scsi_device *sdev)
 	struct ipr_resource_entry *res;
 
 	list_for_each_entry(res, &ioa_cfg->used_res_q, queue) {
-		if ((res->cfgte.res_addr.bus == sdev->channel) &&
-		    (res->cfgte.res_addr.target == sdev->id) &&
-		    (res->cfgte.res_addr.lun == sdev->lun))
+		if ((res->bus == sdev->channel) &&
+		    (res->target == sdev->id) &&
+		    (res->lun == sdev->lun))
 			return res;
 	}
 
@@ -3661,6 +4317,7 @@ static int ipr_slave_configure(struct scsi_device *sdev)
 	struct ipr_resource_entry *res;
 	struct ata_port *ap = NULL;
 	unsigned long lock_flags = 0;
+	char buffer[IPR_MAX_RES_PATH_LENGTH];
 
 	spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
 	res = sdev->hostdata;
@@ -3687,6 +4344,9 @@ static int ipr_slave_configure(struct scsi_device *sdev)
 			ata_sas_slave_configure(sdev, ap);
 		} else
 			scsi_adjust_queue_depth(sdev, 0, sdev->host->cmd_per_lun);
+		if (ioa_cfg->sis64)
+			sdev_printk(KERN_INFO, sdev, "Resource path: %s\n",
+			            ipr_format_resource_path(&res->res_path[0], &buffer[0]));
 		return 0;
 	}
 	spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
@@ -3828,14 +4488,19 @@ static int ipr_device_reset(struct ipr_ioa_cfg *ioa_cfg,
 	ipr_cmd = ipr_get_free_ipr_cmnd(ioa_cfg);
 	ioarcb = &ipr_cmd->ioarcb;
 	cmd_pkt = &ioarcb->cmd_pkt;
-	regs = &ioarcb->add_data.u.regs;
 
-	ioarcb->res_handle = res->cfgte.res_handle;
+	if (ipr_cmd->ioa_cfg->sis64) {
+		regs = &ipr_cmd->i.ata_ioadl.regs;
+		ioarcb->add_cmd_parms_offset = cpu_to_be16(sizeof(*ioarcb));
+	} else
+		regs = &ioarcb->u.add_data.u.regs;
+
+	ioarcb->res_handle = res->res_handle;
 	cmd_pkt->request_type = IPR_RQTYPE_IOACMD;
 	cmd_pkt->cdb[0] = IPR_RESET_DEVICE;
 	if (ipr_is_gata(res)) {
 		cmd_pkt->cdb[2] = IPR_ATA_PHY_RESET;
-		ioarcb->add_cmd_parms_len = cpu_to_be32(sizeof(regs->flags));
+		ioarcb->add_cmd_parms_len = cpu_to_be16(sizeof(regs->flags));
 		regs->flags |= IPR_ATA_FLAG_STATUS_ON_GOOD_COMPLETION;
 	}
 
@@ -3880,19 +4545,7 @@ static int ipr_sata_reset(struct ata_link *link, unsigned int *classes,
 	res = sata_port->res;
 	if (res) {
 		rc = ipr_device_reset(ioa_cfg, res);
-		switch(res->cfgte.proto) {
-		case IPR_PROTO_SATA:
-		case IPR_PROTO_SAS_STP:
-			*classes = ATA_DEV_ATA;
-			break;
-		case IPR_PROTO_SATA_ATAPI:
-		case IPR_PROTO_SAS_STP_ATAPI:
-			*classes = ATA_DEV_ATAPI;
-			break;
-		default:
-			*classes = ATA_DEV_UNKNOWN;
-			break;
-		};
+		*classes = res->ata_class;
 	}
 
 	spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
@@ -3937,7 +4590,7 @@ static int __ipr_eh_dev_reset(struct scsi_cmnd * scsi_cmd)
 		return FAILED;
 
 	list_for_each_entry(ipr_cmd, &ioa_cfg->pending_q, queue) {
-		if (ipr_cmd->ioarcb.res_handle == res->cfgte.res_handle) {
+		if (ipr_cmd->ioarcb.res_handle == res->res_handle) {
 			if (ipr_cmd->scsi_cmd)
 				ipr_cmd->done = ipr_scsi_eh_done;
 			if (ipr_cmd->qc)
@@ -3959,7 +4612,7 @@ static int __ipr_eh_dev_reset(struct scsi_cmnd * scsi_cmd)
 		spin_lock_irq(scsi_cmd->device->host->host_lock);
 
 		list_for_each_entry(ipr_cmd, &ioa_cfg->pending_q, queue) {
-			if (ipr_cmd->ioarcb.res_handle == res->cfgte.res_handle) {
+			if (ipr_cmd->ioarcb.res_handle == res->res_handle) {
 				rc = -EIO;
 				break;
 			}
@@ -3998,13 +4651,13 @@ static void ipr_bus_reset_done(struct ipr_cmnd *ipr_cmd)
 	struct ipr_resource_entry *res;
 
 	ENTER;
-	list_for_each_entry(res, &ioa_cfg->used_res_q, queue) {
-		if (!memcmp(&res->cfgte.res_handle, &ipr_cmd->ioarcb.res_handle,
-			    sizeof(res->cfgte.res_handle))) {
-			scsi_report_bus_reset(ioa_cfg->host, res->cfgte.res_addr.bus);
-			break;
+	if (!ioa_cfg->sis64)
+		list_for_each_entry(res, &ioa_cfg->used_res_q, queue) {
+			if (res->res_handle == ipr_cmd->ioarcb.res_handle) {
+				scsi_report_bus_reset(ioa_cfg->host, res->bus);
+				break;
+			}
 		}
-	}
 
 	/*
 	 * If abort has not completed, indicate the reset has, else call the
@@ -4102,7 +4755,7 @@ static int ipr_cancel_op(struct scsi_cmnd * scsi_cmd)
 		return SUCCESS;
 
 	ipr_cmd = ipr_get_free_ipr_cmnd(ioa_cfg);
-	ipr_cmd->ioarcb.res_handle = res->cfgte.res_handle;
+	ipr_cmd->ioarcb.res_handle = res->res_handle;
 	cmd_pkt = &ipr_cmd->ioarcb.cmd_pkt;
 	cmd_pkt->request_type = IPR_RQTYPE_IOACMD;
 	cmd_pkt->cdb[0] = IPR_CANCEL_ALL_REQUESTS;
@@ -4239,11 +4892,29 @@ static irqreturn_t ipr_isr(int irq, void *devp)
 		return IRQ_NONE;
 	}
 
-	int_mask_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg);
-	int_reg = readl(ioa_cfg->regs.sense_interrupt_reg) & ~int_mask_reg;
+	int_mask_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg32);
+	int_reg = readl(ioa_cfg->regs.sense_interrupt_reg32) & ~int_mask_reg;
 
-	/* If an interrupt on the adapter did not occur, ignore it */
+	/* If an interrupt on the adapter did not occur, ignore it.
+	 * Or in the case of SIS 64, check for a stage change interrupt.
+	 */
 	if (unlikely((int_reg & IPR_PCII_OPER_INTERRUPTS) == 0)) {
+		if (ioa_cfg->sis64) {
+			int_mask_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg);
+			int_reg = readl(ioa_cfg->regs.sense_interrupt_reg) & ~int_mask_reg;
+			if (int_reg & IPR_PCII_IPL_STAGE_CHANGE) {
+
+				/* clear stage change */
+				writel(IPR_PCII_IPL_STAGE_CHANGE, ioa_cfg->regs.clr_interrupt_reg);
+				int_reg = readl(ioa_cfg->regs.sense_interrupt_reg) & ~int_mask_reg;
+				list_del(&ioa_cfg->reset_cmd->queue);
+				del_timer(&ioa_cfg->reset_cmd->timer);
+				ipr_reset_ioa_job(ioa_cfg->reset_cmd);
+				spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
+				return IRQ_HANDLED;
+			}
+		}
+
 		spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
 		return IRQ_NONE;
 	}
@@ -4286,8 +4957,8 @@ static irqreturn_t ipr_isr(int irq, void *devp)
 		if (ipr_cmd != NULL) {
 			/* Clear the PCI interrupt */
 			do {
-				writel(IPR_PCII_HRRQ_UPDATED, ioa_cfg->regs.clr_interrupt_reg);
-				int_reg = readl(ioa_cfg->regs.sense_interrupt_reg) & ~int_mask_reg;
+				writel(IPR_PCII_HRRQ_UPDATED, ioa_cfg->regs.clr_interrupt_reg32);
+				int_reg = readl(ioa_cfg->regs.sense_interrupt_reg32) & ~int_mask_reg;
 			} while (int_reg & IPR_PCII_HRRQ_UPDATED &&
 					num_hrrq++ < IPR_MAX_HRRQ_RETRIES);
 
@@ -4309,6 +4980,53 @@ static irqreturn_t ipr_isr(int irq, void *devp)
 }
 
 /**
+ * ipr_build_ioadl64 - Build a scatter/gather list and map the buffer
+ * @ioa_cfg:	ioa config struct
+ * @ipr_cmd:	ipr command struct
+ *
+ * Return value:
+ * 	0 on success / -1 on failure
+ **/
+static int ipr_build_ioadl64(struct ipr_ioa_cfg *ioa_cfg,
+			     struct ipr_cmnd *ipr_cmd)
+{
+	int i, nseg;
+	struct scatterlist *sg;
+	u32 length;
+	u32 ioadl_flags = 0;
+	struct scsi_cmnd *scsi_cmd = ipr_cmd->scsi_cmd;
+	struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
+	struct ipr_ioadl64_desc *ioadl64 = ipr_cmd->i.ioadl64;
+
+	length = scsi_bufflen(scsi_cmd);
+	if (!length)
+		return 0;
+
+	nseg = scsi_dma_map(scsi_cmd);
+	if (nseg < 0) {
+		dev_err(&ioa_cfg->pdev->dev, "pci_map_sg failed!\n");
+		return -1;
+	}
+
+	ipr_cmd->dma_use_sg = nseg;
+
+	if (scsi_cmd->sc_data_direction == DMA_TO_DEVICE) {
+		ioadl_flags = IPR_IOADL_FLAGS_WRITE;
+		ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_WRITE_NOT_READ;
+	} else if (scsi_cmd->sc_data_direction == DMA_FROM_DEVICE)
+		ioadl_flags = IPR_IOADL_FLAGS_READ;
+
+	scsi_for_each_sg(scsi_cmd, sg, ipr_cmd->dma_use_sg, i) {
+		ioadl64[i].flags = cpu_to_be32(ioadl_flags);
+		ioadl64[i].data_len = cpu_to_be32(sg_dma_len(sg));
+		ioadl64[i].address = cpu_to_be64(sg_dma_address(sg));
+	}
+
+	ioadl64[i-1].flags |= cpu_to_be32(IPR_IOADL_FLAGS_LAST);
+	return 0;
+}
+
+/**
  * ipr_build_ioadl - Build a scatter/gather list and map the buffer
  * @ioa_cfg:	ioa config struct
  * @ipr_cmd:	ipr command struct
@@ -4325,7 +5043,7 @@ static int ipr_build_ioadl(struct ipr_ioa_cfg *ioa_cfg,
 	u32 ioadl_flags = 0;
 	struct scsi_cmnd *scsi_cmd = ipr_cmd->scsi_cmd;
 	struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
-	struct ipr_ioadl_desc *ioadl = ipr_cmd->ioadl;
+	struct ipr_ioadl_desc *ioadl = ipr_cmd->i.ioadl;
 
 	length = scsi_bufflen(scsi_cmd);
 	if (!length)
@@ -4342,8 +5060,8 @@ static int ipr_build_ioadl(struct ipr_ioa_cfg *ioa_cfg,
 	if (scsi_cmd->sc_data_direction == DMA_TO_DEVICE) {
 		ioadl_flags = IPR_IOADL_FLAGS_WRITE;
 		ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_WRITE_NOT_READ;
-		ioarcb->write_data_transfer_length = cpu_to_be32(length);
-		ioarcb->write_ioadl_len =
+		ioarcb->data_transfer_length = cpu_to_be32(length);
+		ioarcb->ioadl_len =
 			cpu_to_be32(sizeof(struct ipr_ioadl_desc) * ipr_cmd->dma_use_sg);
 	} else if (scsi_cmd->sc_data_direction == DMA_FROM_DEVICE) {
 		ioadl_flags = IPR_IOADL_FLAGS_READ;
@@ -4352,11 +5070,10 @@ static int ipr_build_ioadl(struct ipr_ioa_cfg *ioa_cfg,
 			cpu_to_be32(sizeof(struct ipr_ioadl_desc) * ipr_cmd->dma_use_sg);
 	}
 
-	if (ipr_cmd->dma_use_sg <= ARRAY_SIZE(ioarcb->add_data.u.ioadl)) {
-		ioadl = ioarcb->add_data.u.ioadl;
-		ioarcb->write_ioadl_addr =
-			cpu_to_be32(be32_to_cpu(ioarcb->ioarcb_host_pci_addr) +
-				    offsetof(struct ipr_ioarcb, add_data));
+	if (ipr_cmd->dma_use_sg <= ARRAY_SIZE(ioarcb->u.add_data.u.ioadl)) {
+		ioadl = ioarcb->u.add_data.u.ioadl;
+		ioarcb->write_ioadl_addr = cpu_to_be32((ipr_cmd->dma_addr) +
+				    offsetof(struct ipr_ioarcb, u.add_data));
 		ioarcb->read_ioadl_addr = ioarcb->write_ioadl_addr;
 	}
 
@@ -4446,18 +5163,24 @@ static void ipr_reinit_ipr_cmnd_for_erp(struct ipr_cmnd *ipr_cmd)
 {
 	struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
 	struct ipr_ioasa *ioasa = &ipr_cmd->ioasa;
-	dma_addr_t dma_addr = be32_to_cpu(ioarcb->ioarcb_host_pci_addr);
+	dma_addr_t dma_addr = ipr_cmd->dma_addr;
 
 	memset(&ioarcb->cmd_pkt, 0, sizeof(struct ipr_cmd_pkt));
-	ioarcb->write_data_transfer_length = 0;
+	ioarcb->data_transfer_length = 0;
 	ioarcb->read_data_transfer_length = 0;
-	ioarcb->write_ioadl_len = 0;
+	ioarcb->ioadl_len = 0;
 	ioarcb->read_ioadl_len = 0;
 	ioasa->ioasc = 0;
 	ioasa->residual_data_len = 0;
-	ioarcb->write_ioadl_addr =
-		cpu_to_be32(dma_addr + offsetof(struct ipr_cmnd, ioadl));
-	ioarcb->read_ioadl_addr = ioarcb->write_ioadl_addr;
+
+	if (ipr_cmd->ioa_cfg->sis64)
+		ioarcb->u.sis64_addr_data.data_ioadl_addr =
+			cpu_to_be64(dma_addr + offsetof(struct ipr_cmnd, i.ioadl64));
+	else {
+		ioarcb->write_ioadl_addr =
+			cpu_to_be32(dma_addr + offsetof(struct ipr_cmnd, i.ioadl));
+		ioarcb->read_ioadl_addr = ioarcb->write_ioadl_addr;
+	}
 }
 
 /**
@@ -4489,15 +5212,8 @@ static void ipr_erp_request_sense(struct ipr_cmnd *ipr_cmd)
 	cmd_pkt->flags_hi |= IPR_FLAGS_HI_NO_ULEN_CHK;
 	cmd_pkt->timeout = cpu_to_be16(IPR_REQUEST_SENSE_TIMEOUT / HZ);
 
-	ipr_cmd->ioadl[0].flags_and_data_len =
-		cpu_to_be32(IPR_IOADL_FLAGS_READ_LAST | SCSI_SENSE_BUFFERSIZE);
-	ipr_cmd->ioadl[0].address =
-		cpu_to_be32(ipr_cmd->sense_buffer_dma);
-
-	ipr_cmd->ioarcb.read_ioadl_len =
-		cpu_to_be32(sizeof(struct ipr_ioadl_desc));
-	ipr_cmd->ioarcb.read_data_transfer_length =
-		cpu_to_be32(SCSI_SENSE_BUFFERSIZE);
+	ipr_init_ioadl(ipr_cmd, ipr_cmd->sense_buffer_dma,
+		       SCSI_SENSE_BUFFERSIZE, IPR_IOADL_FLAGS_READ_LAST);
 
 	ipr_do_req(ipr_cmd, ipr_erp_done, ipr_timeout,
 		   IPR_REQUEST_SENSE_TIMEOUT * 2);
@@ -4893,9 +5609,9 @@ static int ipr_queuecommand(struct scsi_cmnd *scsi_cmd,
 
 	memcpy(ioarcb->cmd_pkt.cdb, scsi_cmd->cmnd, scsi_cmd->cmd_len);
 	ipr_cmd->scsi_cmd = scsi_cmd;
-	ioarcb->res_handle = res->cfgte.res_handle;
+	ioarcb->res_handle = res->res_handle;
 	ipr_cmd->done = ipr_scsi_done;
-	ipr_trc_hook(ipr_cmd, IPR_TRACE_START, IPR_GET_PHYS_LOC(res->cfgte.res_addr));
+	ipr_trc_hook(ipr_cmd, IPR_TRACE_START, IPR_GET_RES_PHYS_LOC(res));
 
 	if (ipr_is_gscsi(res) || ipr_is_vset_device(res)) {
 		if (scsi_cmd->underflow == 0)
@@ -4916,13 +5632,16 @@ static int ipr_queuecommand(struct scsi_cmnd *scsi_cmd,
 	    (!ipr_is_gscsi(res) || scsi_cmd->cmnd[0] == IPR_QUERY_RSRC_STATE))
 		ioarcb->cmd_pkt.request_type = IPR_RQTYPE_IOACMD;
 
-	if (likely(rc == 0))
-		rc = ipr_build_ioadl(ioa_cfg, ipr_cmd);
+	if (likely(rc == 0)) {
+		if (ioa_cfg->sis64)
+			rc = ipr_build_ioadl64(ioa_cfg, ipr_cmd);
+		else
+			rc = ipr_build_ioadl(ioa_cfg, ipr_cmd);
+	}
 
 	if (likely(rc == 0)) {
 		mb();
-		writel(be32_to_cpu(ipr_cmd->ioarcb.ioarcb_host_pci_addr),
-		       ioa_cfg->regs.ioarrin_reg);
+		ipr_send_command(ipr_cmd);
 	} else {
 		 list_move_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
 		 return SCSI_MLQUEUE_HOST_BUSY;
@@ -5035,20 +5754,9 @@ static void ipr_ata_phy_reset(struct ata_port *ap)
 		goto out_unlock;
 	}
 
-	switch(res->cfgte.proto) {
-	case IPR_PROTO_SATA:
-	case IPR_PROTO_SAS_STP:
-		ap->link.device[0].class = ATA_DEV_ATA;
-		break;
-	case IPR_PROTO_SATA_ATAPI:
-	case IPR_PROTO_SAS_STP_ATAPI:
-		ap->link.device[0].class = ATA_DEV_ATAPI;
-		break;
-	default:
-		ap->link.device[0].class = ATA_DEV_UNKNOWN;
+	ap->link.device[0].class = res->ata_class;
+	if (ap->link.device[0].class == ATA_DEV_UNKNOWN)
 		ata_port_disable(ap);
-		break;
-	};
 
 out_unlock:
 	spin_unlock_irqrestore(ioa_cfg->host->host_lock, flags);
@@ -5134,8 +5842,7 @@ static void ipr_sata_done(struct ipr_cmnd *ipr_cmd)
 	ipr_dump_ioasa(ioa_cfg, ipr_cmd, res);
 
 	if (be32_to_cpu(ipr_cmd->ioasa.ioasc_specific) & IPR_ATA_DEVICE_WAS_RESET)
-		scsi_report_device_reset(ioa_cfg->host, res->cfgte.res_addr.bus,
-					 res->cfgte.res_addr.target);
+		scsi_report_device_reset(ioa_cfg->host, res->bus, res->target);
 
 	if (IPR_IOASC_SENSE_KEY(ioasc) > RECOVERED_ERROR)
 		qc->err_mask |= __ac_err_mask(ipr_cmd->ioasa.u.gata.status);
@@ -5146,6 +5853,52 @@ static void ipr_sata_done(struct ipr_cmnd *ipr_cmd)
 }
 
 /**
+ * ipr_build_ata_ioadl64 - Build an ATA scatter/gather list
+ * @ipr_cmd:	ipr command struct
+ * @qc:		ATA queued command
+ *
+ **/
+static void ipr_build_ata_ioadl64(struct ipr_cmnd *ipr_cmd,
+				  struct ata_queued_cmd *qc)
+{
+	u32 ioadl_flags = 0;
+	struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
+	struct ipr_ioadl64_desc *ioadl64 = ipr_cmd->i.ioadl64;
+	struct ipr_ioadl64_desc *last_ioadl64 = NULL;
+	int len = qc->nbytes;
+	struct scatterlist *sg;
+	unsigned int si;
+	dma_addr_t dma_addr = ipr_cmd->dma_addr;
+
+	if (len == 0)
+		return;
+
+	if (qc->dma_dir == DMA_TO_DEVICE) {
+		ioadl_flags = IPR_IOADL_FLAGS_WRITE;
+		ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_WRITE_NOT_READ;
+	} else if (qc->dma_dir == DMA_FROM_DEVICE)
+		ioadl_flags = IPR_IOADL_FLAGS_READ;
+
+	ioarcb->data_transfer_length = cpu_to_be32(len);
+	ioarcb->ioadl_len =
+		cpu_to_be32(sizeof(struct ipr_ioadl64_desc) * ipr_cmd->dma_use_sg);
+	ioarcb->u.sis64_addr_data.data_ioadl_addr =
+		cpu_to_be64(dma_addr + offsetof(struct ipr_cmnd, i.ata_ioadl));
+
+	for_each_sg(qc->sg, sg, qc->n_elem, si) {
+		ioadl64->flags = cpu_to_be32(ioadl_flags);
+		ioadl64->data_len = cpu_to_be32(sg_dma_len(sg));
+		ioadl64->address = cpu_to_be64(sg_dma_address(sg));
+
+		last_ioadl64 = ioadl64;
+		ioadl64++;
+	}
+
+	if (likely(last_ioadl64))
+		last_ioadl64->flags |= cpu_to_be32(IPR_IOADL_FLAGS_LAST);
+}
+
+/**
  * ipr_build_ata_ioadl - Build an ATA scatter/gather list
  * @ipr_cmd:	ipr command struct
  * @qc:		ATA queued command
@@ -5156,7 +5909,7 @@ static void ipr_build_ata_ioadl(struct ipr_cmnd *ipr_cmd,
 {
 	u32 ioadl_flags = 0;
 	struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
-	struct ipr_ioadl_desc *ioadl = ipr_cmd->ioadl;
+	struct ipr_ioadl_desc *ioadl = ipr_cmd->i.ioadl;
 	struct ipr_ioadl_desc *last_ioadl = NULL;
 	int len = qc->nbytes;
 	struct scatterlist *sg;
@@ -5168,8 +5921,8 @@ static void ipr_build_ata_ioadl(struct ipr_cmnd *ipr_cmd,
 	if (qc->dma_dir == DMA_TO_DEVICE) {
 		ioadl_flags = IPR_IOADL_FLAGS_WRITE;
 		ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_WRITE_NOT_READ;
-		ioarcb->write_data_transfer_length = cpu_to_be32(len);
-		ioarcb->write_ioadl_len =
+		ioarcb->data_transfer_length = cpu_to_be32(len);
+		ioarcb->ioadl_len =
 			cpu_to_be32(sizeof(struct ipr_ioadl_desc) * ipr_cmd->dma_use_sg);
 	} else if (qc->dma_dir == DMA_FROM_DEVICE) {
 		ioadl_flags = IPR_IOADL_FLAGS_READ;
@@ -5212,25 +5965,34 @@ static unsigned int ipr_qc_issue(struct ata_queued_cmd *qc)
 
 	ipr_cmd = ipr_get_free_ipr_cmnd(ioa_cfg);
 	ioarcb = &ipr_cmd->ioarcb;
-	regs = &ioarcb->add_data.u.regs;
 
-	memset(&ioarcb->add_data, 0, sizeof(ioarcb->add_data));
-	ioarcb->add_cmd_parms_len = cpu_to_be32(sizeof(ioarcb->add_data.u.regs));
+	if (ioa_cfg->sis64) {
+		regs = &ipr_cmd->i.ata_ioadl.regs;
+		ioarcb->add_cmd_parms_offset = cpu_to_be16(sizeof(*ioarcb));
+	} else
+		regs = &ioarcb->u.add_data.u.regs;
+
+	memset(regs, 0, sizeof(*regs));
+	ioarcb->add_cmd_parms_len = cpu_to_be16(sizeof(*regs));
 
 	list_add_tail(&ipr_cmd->queue, &ioa_cfg->pending_q);
 	ipr_cmd->qc = qc;
 	ipr_cmd->done = ipr_sata_done;
-	ipr_cmd->ioarcb.res_handle = res->cfgte.res_handle;
+	ipr_cmd->ioarcb.res_handle = res->res_handle;
 	ioarcb->cmd_pkt.request_type = IPR_RQTYPE_ATA_PASSTHRU;
 	ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_NO_LINK_DESC;
 	ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_NO_ULEN_CHK;
 	ipr_cmd->dma_use_sg = qc->n_elem;
 
-	ipr_build_ata_ioadl(ipr_cmd, qc);
+	if (ioa_cfg->sis64)
+		ipr_build_ata_ioadl64(ipr_cmd, qc);
+	else
+		ipr_build_ata_ioadl(ipr_cmd, qc);
+
 	regs->flags |= IPR_ATA_FLAG_STATUS_ON_GOOD_COMPLETION;
 	ipr_copy_sata_tf(regs, &qc->tf);
 	memcpy(ioarcb->cmd_pkt.cdb, qc->cdb, IPR_MAX_CDB_LEN);
-	ipr_trc_hook(ipr_cmd, IPR_TRACE_START, IPR_GET_PHYS_LOC(res->cfgte.res_addr));
+	ipr_trc_hook(ipr_cmd, IPR_TRACE_START, IPR_GET_RES_PHYS_LOC(res));
 
 	switch (qc->tf.protocol) {
 	case ATA_PROT_NODATA:
@@ -5257,8 +6019,9 @@ static unsigned int ipr_qc_issue(struct ata_queued_cmd *qc)
 	}
 
 	mb();
-	writel(be32_to_cpu(ioarcb->ioarcb_host_pci_addr),
-	       ioa_cfg->regs.ioarrin_reg);
+
+	ipr_send_command(ipr_cmd);
+
 	return 0;
 }
 
@@ -5459,7 +6222,7 @@ static void ipr_set_sup_dev_dflt(struct ipr_supported_device *supported_dev,
  * ipr_set_supported_devs - Send Set Supported Devices for a device
  * @ipr_cmd:	ipr command struct
  *
- * This function send a Set Supported Devices to the adapter
+ * This function sends a Set Supported Devices to the adapter
  *
  * Return value:
  * 	IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
@@ -5468,7 +6231,6 @@ static int ipr_set_supported_devs(struct ipr_cmnd *ipr_cmd)
 {
 	struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
 	struct ipr_supported_device *supp_dev = &ioa_cfg->vpd_cbs->supp_dev;
-	struct ipr_ioadl_desc *ioadl = ipr_cmd->ioadl;
 	struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
 	struct ipr_resource_entry *res = ipr_cmd->u.res;
 
@@ -5479,28 +6241,28 @@ static int ipr_set_supported_devs(struct ipr_cmnd *ipr_cmd)
 			continue;
 
 		ipr_cmd->u.res = res;
-		ipr_set_sup_dev_dflt(supp_dev, &res->cfgte.std_inq_data.vpids);
+		ipr_set_sup_dev_dflt(supp_dev, &res->std_inq_data.vpids);
 
 		ioarcb->res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE);
 		ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_WRITE_NOT_READ;
 		ioarcb->cmd_pkt.request_type = IPR_RQTYPE_IOACMD;
 
 		ioarcb->cmd_pkt.cdb[0] = IPR_SET_SUPPORTED_DEVICES;
+		ioarcb->cmd_pkt.cdb[1] = IPR_SET_ALL_SUPPORTED_DEVICES;
 		ioarcb->cmd_pkt.cdb[7] = (sizeof(struct ipr_supported_device) >> 8) & 0xff;
 		ioarcb->cmd_pkt.cdb[8] = sizeof(struct ipr_supported_device) & 0xff;
 
-		ioadl->flags_and_data_len = cpu_to_be32(IPR_IOADL_FLAGS_WRITE_LAST |
-							sizeof(struct ipr_supported_device));
-		ioadl->address = cpu_to_be32(ioa_cfg->vpd_cbs_dma +
-					     offsetof(struct ipr_misc_cbs, supp_dev));
-		ioarcb->write_ioadl_len = cpu_to_be32(sizeof(struct ipr_ioadl_desc));
-		ioarcb->write_data_transfer_length =
-			cpu_to_be32(sizeof(struct ipr_supported_device));
+		ipr_init_ioadl(ipr_cmd,
+			       ioa_cfg->vpd_cbs_dma +
+				 offsetof(struct ipr_misc_cbs, supp_dev),
+			       sizeof(struct ipr_supported_device),
+			       IPR_IOADL_FLAGS_WRITE_LAST);
 
 		ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout,
 			   IPR_SET_SUP_DEVICE_TIMEOUT);
 
-		ipr_cmd->job_step = ipr_set_supported_devs;
+		if (!ioa_cfg->sis64)
+			ipr_cmd->job_step = ipr_set_supported_devs;
 		return IPR_RC_JOB_RETURN;
 	}
 
@@ -5508,36 +6270,6 @@ static int ipr_set_supported_devs(struct ipr_cmnd *ipr_cmd)
 }
 
 /**
- * ipr_setup_write_cache - Disable write cache if needed
- * @ipr_cmd:	ipr command struct
- *
- * This function sets up adapters write cache to desired setting
- *
- * Return value:
- * 	IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
- **/
-static int ipr_setup_write_cache(struct ipr_cmnd *ipr_cmd)
-{
-	struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
-
-	ipr_cmd->job_step = ipr_set_supported_devs;
-	ipr_cmd->u.res = list_entry(ioa_cfg->used_res_q.next,
-				    struct ipr_resource_entry, queue);
-
-	if (ioa_cfg->cache_state != CACHE_DISABLED)
-		return IPR_RC_JOB_CONTINUE;
-
-	ipr_cmd->ioarcb.res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE);
-	ipr_cmd->ioarcb.cmd_pkt.request_type = IPR_RQTYPE_IOACMD;
-	ipr_cmd->ioarcb.cmd_pkt.cdb[0] = IPR_IOA_SHUTDOWN;
-	ipr_cmd->ioarcb.cmd_pkt.cdb[1] = IPR_SHUTDOWN_PREPARE_FOR_NORMAL;
-
-	ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout, IPR_INTERNAL_TIMEOUT);
-
-	return IPR_RC_JOB_RETURN;
-}
-
-/**
  * ipr_get_mode_page - Locate specified mode page
  * @mode_pages:	mode page buffer
  * @page_code:	page code to find
@@ -5695,10 +6427,9 @@ static void ipr_modify_ioafp_mode_page_28(struct ipr_ioa_cfg *ioa_cfg,
  * 	none
  **/
 static void ipr_build_mode_select(struct ipr_cmnd *ipr_cmd,
-				  __be32 res_handle, u8 parm, u32 dma_addr,
-				  u8 xfer_len)
+				  __be32 res_handle, u8 parm,
+				  dma_addr_t dma_addr, u8 xfer_len)
 {
-	struct ipr_ioadl_desc *ioadl = ipr_cmd->ioadl;
 	struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
 
 	ioarcb->res_handle = res_handle;
@@ -5708,11 +6439,7 @@ static void ipr_build_mode_select(struct ipr_cmnd *ipr_cmd,
 	ioarcb->cmd_pkt.cdb[1] = parm;
 	ioarcb->cmd_pkt.cdb[4] = xfer_len;
 
-	ioadl->flags_and_data_len =
-		cpu_to_be32(IPR_IOADL_FLAGS_WRITE_LAST | xfer_len);
-	ioadl->address = cpu_to_be32(dma_addr);
-	ioarcb->write_ioadl_len = cpu_to_be32(sizeof(struct ipr_ioadl_desc));
-	ioarcb->write_data_transfer_length = cpu_to_be32(xfer_len);
+	ipr_init_ioadl(ipr_cmd, dma_addr, xfer_len, IPR_IOADL_FLAGS_WRITE_LAST);
 }
 
 /**
@@ -5742,7 +6469,9 @@ static int ipr_ioafp_mode_select_page28(struct ipr_cmnd *ipr_cmd)
 			      ioa_cfg->vpd_cbs_dma + offsetof(struct ipr_misc_cbs, mode_pages),
 			      length);
 
-	ipr_cmd->job_step = ipr_setup_write_cache;
+	ipr_cmd->job_step = ipr_set_supported_devs;
+	ipr_cmd->u.res = list_entry(ioa_cfg->used_res_q.next,
+				    struct ipr_resource_entry, queue);
 	ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout, IPR_INTERNAL_TIMEOUT);
 
 	LEAVE;
@@ -5762,9 +6491,8 @@ static int ipr_ioafp_mode_select_page28(struct ipr_cmnd *ipr_cmd)
  **/
 static void ipr_build_mode_sense(struct ipr_cmnd *ipr_cmd,
 				 __be32 res_handle,
-				 u8 parm, u32 dma_addr, u8 xfer_len)
+				 u8 parm, dma_addr_t dma_addr, u8 xfer_len)
 {
-	struct ipr_ioadl_desc *ioadl = ipr_cmd->ioadl;
 	struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
 
 	ioarcb->res_handle = res_handle;
@@ -5773,11 +6501,7 @@ static void ipr_build_mode_sense(struct ipr_cmnd *ipr_cmd,
 	ioarcb->cmd_pkt.cdb[4] = xfer_len;
 	ioarcb->cmd_pkt.request_type = IPR_RQTYPE_SCSICDB;
 
-	ioadl->flags_and_data_len =
-		cpu_to_be32(IPR_IOADL_FLAGS_READ_LAST | xfer_len);
-	ioadl->address = cpu_to_be32(dma_addr);
-	ioarcb->read_ioadl_len = cpu_to_be32(sizeof(struct ipr_ioadl_desc));
-	ioarcb->read_data_transfer_length = cpu_to_be32(xfer_len);
+	ipr_init_ioadl(ipr_cmd, dma_addr, xfer_len, IPR_IOADL_FLAGS_READ_LAST);
 }
 
 /**
@@ -5815,10 +6539,13 @@ static int ipr_reset_cmd_failed(struct ipr_cmnd *ipr_cmd)
  **/
 static int ipr_reset_mode_sense_failed(struct ipr_cmnd *ipr_cmd)
 {
+	struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
 	u32 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
 
 	if (ioasc == IPR_IOASC_IR_INVALID_REQ_TYPE_OR_PKT) {
-		ipr_cmd->job_step = ipr_setup_write_cache;
+		ipr_cmd->job_step = ipr_set_supported_devs;
+		ipr_cmd->u.res = list_entry(ioa_cfg->used_res_q.next,
+					    struct ipr_resource_entry, queue);
 		return IPR_RC_JOB_CONTINUE;
 	}
 
@@ -5958,24 +6685,36 @@ static int ipr_init_res_table(struct ipr_cmnd *ipr_cmd)
 {
 	struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
 	struct ipr_resource_entry *res, *temp;
-	struct ipr_config_table_entry *cfgte;
-	int found, i;
+	struct ipr_config_table_entry_wrapper cfgtew;
+	int entries, found, flag, i;
 	LIST_HEAD(old_res);
 
 	ENTER;
-	if (ioa_cfg->cfg_table->hdr.flags & IPR_UCODE_DOWNLOAD_REQ)
+	if (ioa_cfg->sis64)
+		flag = ioa_cfg->u.cfg_table64->hdr64.flags;
+	else
+		flag = ioa_cfg->u.cfg_table->hdr.flags;
+
+	if (flag & IPR_UCODE_DOWNLOAD_REQ)
 		dev_err(&ioa_cfg->pdev->dev, "Microcode download required\n");
 
 	list_for_each_entry_safe(res, temp, &ioa_cfg->used_res_q, queue)
 		list_move_tail(&res->queue, &old_res);
 
-	for (i = 0; i < ioa_cfg->cfg_table->hdr.num_entries; i++) {
-		cfgte = &ioa_cfg->cfg_table->dev[i];
+	if (ioa_cfg->sis64)
+		entries = ioa_cfg->u.cfg_table64->hdr64.num_entries;
+	else
+		entries = ioa_cfg->u.cfg_table->hdr.num_entries;
+
+	for (i = 0; i < entries; i++) {
+		if (ioa_cfg->sis64)
+			cfgtew.u.cfgte64 = &ioa_cfg->u.cfg_table64->dev[i];
+		else
+			cfgtew.u.cfgte = &ioa_cfg->u.cfg_table->dev[i];
 		found = 0;
 
 		list_for_each_entry_safe(res, temp, &old_res, queue) {
-			if (!memcmp(&res->cfgte.res_addr,
-				    &cfgte->res_addr, sizeof(cfgte->res_addr))) {
+			if (ipr_is_same_device(res, &cfgtew)) {
 				list_move_tail(&res->queue, &ioa_cfg->used_res_q);
 				found = 1;
 				break;
@@ -5992,24 +6731,27 @@ static int ipr_init_res_table(struct ipr_cmnd *ipr_cmd)
 			res = list_entry(ioa_cfg->free_res_q.next,
 					 struct ipr_resource_entry, queue);
 			list_move_tail(&res->queue, &ioa_cfg->used_res_q);
-			ipr_init_res_entry(res);
+			ipr_init_res_entry(res, &cfgtew);
 			res->add_to_ml = 1;
 		}
 
 		if (found)
-			memcpy(&res->cfgte, cfgte, sizeof(struct ipr_config_table_entry));
+			ipr_update_res_entry(res, &cfgtew);
 	}
 
 	list_for_each_entry_safe(res, temp, &old_res, queue) {
 		if (res->sdev) {
 			res->del_from_ml = 1;
-			res->cfgte.res_handle = IPR_INVALID_RES_HANDLE;
+			res->res_handle = IPR_INVALID_RES_HANDLE;
 			list_move_tail(&res->queue, &ioa_cfg->used_res_q);
-		} else {
-			list_move_tail(&res->queue, &ioa_cfg->free_res_q);
 		}
 	}
 
+	list_for_each_entry_safe(res, temp, &old_res, queue) {
+		ipr_clear_res_target(res);
+		list_move_tail(&res->queue, &ioa_cfg->free_res_q);
+	}
+
 	if (ioa_cfg->dual_raid && ipr_dual_ioa_raid)
 		ipr_cmd->job_step = ipr_ioafp_mode_sense_page24;
 	else
@@ -6033,7 +6775,6 @@ static int ipr_ioafp_query_ioa_cfg(struct ipr_cmnd *ipr_cmd)
 {
 	struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
 	struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
-	struct ipr_ioadl_desc *ioadl = ipr_cmd->ioadl;
 	struct ipr_inquiry_page3 *ucode_vpd = &ioa_cfg->vpd_cbs->page3_data;
 	struct ipr_inquiry_cap *cap = &ioa_cfg->vpd_cbs->cap;
 
@@ -6047,16 +6788,11 @@ static int ipr_ioafp_query_ioa_cfg(struct ipr_cmnd *ipr_cmd)
 	ioarcb->res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE);
 
 	ioarcb->cmd_pkt.cdb[0] = IPR_QUERY_IOA_CONFIG;
-	ioarcb->cmd_pkt.cdb[7] = (sizeof(struct ipr_config_table) >> 8) & 0xff;
-	ioarcb->cmd_pkt.cdb[8] = sizeof(struct ipr_config_table) & 0xff;
+	ioarcb->cmd_pkt.cdb[7] = (ioa_cfg->cfg_table_size >> 8) & 0xff;
+	ioarcb->cmd_pkt.cdb[8] = ioa_cfg->cfg_table_size & 0xff;
 
-	ioarcb->read_ioadl_len = cpu_to_be32(sizeof(struct ipr_ioadl_desc));
-	ioarcb->read_data_transfer_length =
-		cpu_to_be32(sizeof(struct ipr_config_table));
-
-	ioadl->address = cpu_to_be32(ioa_cfg->cfg_table_dma);
-	ioadl->flags_and_data_len =
-		cpu_to_be32(IPR_IOADL_FLAGS_READ_LAST | sizeof(struct ipr_config_table));
+	ipr_init_ioadl(ipr_cmd, ioa_cfg->cfg_table_dma, ioa_cfg->cfg_table_size,
+		       IPR_IOADL_FLAGS_READ_LAST);
 
 	ipr_cmd->job_step = ipr_init_res_table;
 
@@ -6076,10 +6812,9 @@ static int ipr_ioafp_query_ioa_cfg(struct ipr_cmnd *ipr_cmd)
  * 	none
  **/
 static void ipr_ioafp_inquiry(struct ipr_cmnd *ipr_cmd, u8 flags, u8 page,
-			      u32 dma_addr, u8 xfer_len)
+			      dma_addr_t dma_addr, u8 xfer_len)
 {
 	struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
-	struct ipr_ioadl_desc *ioadl = ipr_cmd->ioadl;
 
 	ENTER;
 	ioarcb->cmd_pkt.request_type = IPR_RQTYPE_SCSICDB;
@@ -6090,12 +6825,7 @@ static void ipr_ioafp_inquiry(struct ipr_cmnd *ipr_cmd, u8 flags, u8 page,
 	ioarcb->cmd_pkt.cdb[2] = page;
 	ioarcb->cmd_pkt.cdb[4] = xfer_len;
 
-	ioarcb->read_ioadl_len = cpu_to_be32(sizeof(struct ipr_ioadl_desc));
-	ioarcb->read_data_transfer_length = cpu_to_be32(xfer_len);
-
-	ioadl->address = cpu_to_be32(dma_addr);
-	ioadl->flags_and_data_len =
-		cpu_to_be32(IPR_IOADL_FLAGS_READ_LAST | xfer_len);
+	ipr_init_ioadl(ipr_cmd, dma_addr, xfer_len, IPR_IOADL_FLAGS_READ_LAST);
 
 	ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout, IPR_INTERNAL_TIMEOUT);
 	LEAVE;
@@ -6166,13 +6896,9 @@ static int ipr_ioafp_cap_inquiry(struct ipr_cmnd *ipr_cmd)
 static int ipr_ioafp_page3_inquiry(struct ipr_cmnd *ipr_cmd)
 {
 	struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
-	struct ipr_inquiry_page0 *page0 = &ioa_cfg->vpd_cbs->page0_data;
 
 	ENTER;
 
-	if (!ipr_inquiry_page_supported(page0, 1))
-		ioa_cfg->cache_state = CACHE_NONE;
-
 	ipr_cmd->job_step = ipr_ioafp_cap_inquiry;
 
 	ipr_ioafp_inquiry(ipr_cmd, 1, 3,
@@ -6240,7 +6966,7 @@ static int ipr_ioafp_std_inquiry(struct ipr_cmnd *ipr_cmd)
 }
 
 /**
- * ipr_ioafp_indentify_hrrq - Send Identify Host RRQ.
+ * ipr_ioafp_identify_hrrq - Send Identify Host RRQ.
  * @ipr_cmd:	ipr command struct
  *
  * This function send an Identify Host Request Response Queue
@@ -6249,7 +6975,7 @@ static int ipr_ioafp_std_inquiry(struct ipr_cmnd *ipr_cmd)
  * Return value:
  * 	IPR_RC_JOB_RETURN
  **/
-static int ipr_ioafp_indentify_hrrq(struct ipr_cmnd *ipr_cmd)
+static int ipr_ioafp_identify_hrrq(struct ipr_cmnd *ipr_cmd)
 {
 	struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
 	struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
@@ -6261,19 +6987,32 @@ static int ipr_ioafp_indentify_hrrq(struct ipr_cmnd *ipr_cmd)
 	ioarcb->res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE);
 
 	ioarcb->cmd_pkt.request_type = IPR_RQTYPE_IOACMD;
+	if (ioa_cfg->sis64)
+		ioarcb->cmd_pkt.cdb[1] = 0x1;
 	ioarcb->cmd_pkt.cdb[2] =
-		((u32) ioa_cfg->host_rrq_dma >> 24) & 0xff;
+		((u64) ioa_cfg->host_rrq_dma >> 24) & 0xff;
 	ioarcb->cmd_pkt.cdb[3] =
-		((u32) ioa_cfg->host_rrq_dma >> 16) & 0xff;
+		((u64) ioa_cfg->host_rrq_dma >> 16) & 0xff;
 	ioarcb->cmd_pkt.cdb[4] =
-		((u32) ioa_cfg->host_rrq_dma >> 8) & 0xff;
+		((u64) ioa_cfg->host_rrq_dma >> 8) & 0xff;
 	ioarcb->cmd_pkt.cdb[5] =
-		((u32) ioa_cfg->host_rrq_dma) & 0xff;
+		((u64) ioa_cfg->host_rrq_dma) & 0xff;
 	ioarcb->cmd_pkt.cdb[7] =
 		((sizeof(u32) * IPR_NUM_CMD_BLKS) >> 8) & 0xff;
 	ioarcb->cmd_pkt.cdb[8] =
 		(sizeof(u32) * IPR_NUM_CMD_BLKS) & 0xff;
 
+	if (ioa_cfg->sis64) {
+		ioarcb->cmd_pkt.cdb[10] =
+			((u64) ioa_cfg->host_rrq_dma >> 56) & 0xff;
+		ioarcb->cmd_pkt.cdb[11] =
+			((u64) ioa_cfg->host_rrq_dma >> 48) & 0xff;
+		ioarcb->cmd_pkt.cdb[12] =
+			((u64) ioa_cfg->host_rrq_dma >> 40) & 0xff;
+		ioarcb->cmd_pkt.cdb[13] =
+			((u64) ioa_cfg->host_rrq_dma >> 32) & 0xff;
+	}
+
 	ipr_cmd->job_step = ipr_ioafp_std_inquiry;
 
 	ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout, IPR_INTERNAL_TIMEOUT);
@@ -6354,7 +7093,58 @@ static void ipr_init_ioa_mem(struct ipr_ioa_cfg *ioa_cfg)
 	ioa_cfg->toggle_bit = 1;
 
 	/* Zero out config table */
-	memset(ioa_cfg->cfg_table, 0, sizeof(struct ipr_config_table));
+	memset(ioa_cfg->u.cfg_table, 0, ioa_cfg->cfg_table_size);
+}
+
+/**
+ * ipr_reset_next_stage - Process IPL stage change based on feedback register.
+ * @ipr_cmd:	ipr command struct
+ *
+ * Return value:
+ * 	IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
+ **/
+static int ipr_reset_next_stage(struct ipr_cmnd *ipr_cmd)
+{
+	unsigned long stage, stage_time;
+	u32 feedback;
+	volatile u32 int_reg;
+	struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
+	u64 maskval = 0;
+
+	feedback = readl(ioa_cfg->regs.init_feedback_reg);
+	stage = feedback & IPR_IPL_INIT_STAGE_MASK;
+	stage_time = feedback & IPR_IPL_INIT_STAGE_TIME_MASK;
+
+	ipr_dbg("IPL stage = 0x%lx, IPL stage time = %ld\n", stage, stage_time);
+
+	/* sanity check the stage_time value */
+	if (stage_time < IPR_IPL_INIT_MIN_STAGE_TIME)
+		stage_time = IPR_IPL_INIT_MIN_STAGE_TIME;
+	else if (stage_time > IPR_LONG_OPERATIONAL_TIMEOUT)
+		stage_time = IPR_LONG_OPERATIONAL_TIMEOUT;
+
+	if (stage == IPR_IPL_INIT_STAGE_UNKNOWN) {
+		writel(IPR_PCII_IPL_STAGE_CHANGE, ioa_cfg->regs.set_interrupt_mask_reg);
+		int_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg);
+		stage_time = ioa_cfg->transop_timeout;
+		ipr_cmd->job_step = ipr_ioafp_identify_hrrq;
+	} else if (stage == IPR_IPL_INIT_STAGE_TRANSOP) {
+		ipr_cmd->job_step = ipr_ioafp_identify_hrrq;
+		maskval = IPR_PCII_IPL_STAGE_CHANGE;
+		maskval = (maskval << 32) | IPR_PCII_IOA_TRANS_TO_OPER;
+		writeq(maskval, ioa_cfg->regs.set_interrupt_mask_reg);
+		int_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg);
+		return IPR_RC_JOB_CONTINUE;
+	}
+
+	ipr_cmd->timer.data = (unsigned long) ipr_cmd;
+	ipr_cmd->timer.expires = jiffies + stage_time * HZ;
+	ipr_cmd->timer.function = (void (*)(unsigned long))ipr_oper_timeout;
+	ipr_cmd->done = ipr_reset_ioa_job;
+	add_timer(&ipr_cmd->timer);
+	list_add_tail(&ipr_cmd->queue, &ioa_cfg->pending_q);
+
+	return IPR_RC_JOB_RETURN;
 }
 
 /**
@@ -6373,7 +7163,7 @@ static int ipr_reset_enable_ioa(struct ipr_cmnd *ipr_cmd)
 	volatile u32 int_reg;
 
 	ENTER;
-	ipr_cmd->job_step = ipr_ioafp_indentify_hrrq;
+	ipr_cmd->job_step = ipr_ioafp_identify_hrrq;
 	ipr_init_ioa_mem(ioa_cfg);
 
 	ioa_cfg->allow_interrupts = 1;
@@ -6381,19 +7171,27 @@ static int ipr_reset_enable_ioa(struct ipr_cmnd *ipr_cmd)
 
 	if (int_reg & IPR_PCII_IOA_TRANS_TO_OPER) {
 		writel((IPR_PCII_ERROR_INTERRUPTS | IPR_PCII_HRRQ_UPDATED),
-		       ioa_cfg->regs.clr_interrupt_mask_reg);
+		       ioa_cfg->regs.clr_interrupt_mask_reg32);
 		int_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg);
 		return IPR_RC_JOB_CONTINUE;
 	}
 
 	/* Enable destructive diagnostics on IOA */
-	writel(ioa_cfg->doorbell, ioa_cfg->regs.set_uproc_interrupt_reg);
+	writel(ioa_cfg->doorbell, ioa_cfg->regs.set_uproc_interrupt_reg32);
+
+	writel(IPR_PCII_OPER_INTERRUPTS, ioa_cfg->regs.clr_interrupt_mask_reg32);
+	if (ioa_cfg->sis64)
+		writel(IPR_PCII_IPL_STAGE_CHANGE, ioa_cfg->regs.clr_interrupt_mask_reg);
 
-	writel(IPR_PCII_OPER_INTERRUPTS, ioa_cfg->regs.clr_interrupt_mask_reg);
 	int_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg);
 
 	dev_info(&ioa_cfg->pdev->dev, "Initializing IOA.\n");
 
+	if (ioa_cfg->sis64) {
+		ipr_cmd->job_step = ipr_reset_next_stage;
+		return IPR_RC_JOB_CONTINUE;
+	}
+
 	ipr_cmd->timer.data = (unsigned long) ipr_cmd;
 	ipr_cmd->timer.expires = jiffies + (ioa_cfg->transop_timeout * HZ);
 	ipr_cmd->timer.function = (void (*)(unsigned long))ipr_oper_timeout;
@@ -6463,7 +7261,7 @@ static void ipr_get_unit_check_buffer(struct ipr_ioa_cfg *ioa_cfg)
 
 	mailbox = readl(ioa_cfg->ioa_mailbox);
 
-	if (!ipr_sdt_is_fmt2(mailbox)) {
+	if (!ioa_cfg->sis64 && !ipr_sdt_is_fmt2(mailbox)) {
 		ipr_unit_check_no_data(ioa_cfg);
 		return;
 	}
@@ -6472,15 +7270,20 @@ static void ipr_get_unit_check_buffer(struct ipr_ioa_cfg *ioa_cfg)
 	rc = ipr_get_ldump_data_section(ioa_cfg, mailbox, (__be32 *) &sdt,
 					(sizeof(struct ipr_uc_sdt)) / sizeof(__be32));
 
-	if (rc || (be32_to_cpu(sdt.hdr.state) != IPR_FMT2_SDT_READY_TO_USE) ||
-	    !(sdt.entry[0].flags & IPR_SDT_VALID_ENTRY)) {
+	if (rc || !(sdt.entry[0].flags & IPR_SDT_VALID_ENTRY) ||
+	    ((be32_to_cpu(sdt.hdr.state) != IPR_FMT3_SDT_READY_TO_USE) &&
+	    (be32_to_cpu(sdt.hdr.state) != IPR_FMT2_SDT_READY_TO_USE))) {
 		ipr_unit_check_no_data(ioa_cfg);
 		return;
 	}
 
 	/* Find length of the first sdt entry (UC buffer) */
-	length = (be32_to_cpu(sdt.entry[0].end_offset) -
-		  be32_to_cpu(sdt.entry[0].bar_str_offset)) & IPR_FMT2_MBX_ADDR_MASK;
+	if (be32_to_cpu(sdt.hdr.state) == IPR_FMT3_SDT_READY_TO_USE)
+		length = be32_to_cpu(sdt.entry[0].end_token);
+	else
+		length = (be32_to_cpu(sdt.entry[0].end_token) -
+			  be32_to_cpu(sdt.entry[0].start_token)) &
+			  IPR_FMT2_MBX_ADDR_MASK;
 
 	hostrcb = list_entry(ioa_cfg->hostrcb_free_q.next,
 			     struct ipr_hostrcb, queue);
@@ -6488,13 +7291,13 @@ static void ipr_get_unit_check_buffer(struct ipr_ioa_cfg *ioa_cfg)
 	memset(&hostrcb->hcam, 0, sizeof(hostrcb->hcam));
 
 	rc = ipr_get_ldump_data_section(ioa_cfg,
-					be32_to_cpu(sdt.entry[0].bar_str_offset),
+					be32_to_cpu(sdt.entry[0].start_token),
 					(__be32 *)&hostrcb->hcam,
 					min(length, (int)sizeof(hostrcb->hcam)) / sizeof(__be32));
 
 	if (!rc) {
 		ipr_handle_log_data(ioa_cfg, hostrcb);
-		ioasc = be32_to_cpu(hostrcb->hcam.u.error.failing_dev_ioasc);
+		ioasc = be32_to_cpu(hostrcb->hcam.u.error.fd_ioasc);
 		if (ioasc == IPR_IOASC_NR_IOA_RESET_REQUIRED &&
 		    ioa_cfg->sdt_state == GET_DUMP)
 			ioa_cfg->sdt_state = WAIT_FOR_DUMP;
@@ -6722,7 +7525,7 @@ static int ipr_reset_alert(struct ipr_cmnd *ipr_cmd)
 
 	if ((rc == PCIBIOS_SUCCESSFUL) && (cmd_reg & PCI_COMMAND_MEMORY)) {
 		ipr_mask_and_clear_interrupts(ioa_cfg, ~0);
-		writel(IPR_UPROCI_RESET_ALERT, ioa_cfg->regs.set_uproc_interrupt_reg);
+		writel(IPR_UPROCI_RESET_ALERT, ioa_cfg->regs.set_uproc_interrupt_reg32);
 		ipr_cmd->job_step = ipr_reset_wait_to_start_bist;
 	} else {
 		ipr_cmd->job_step = ioa_cfg->reset;
@@ -6785,7 +7588,10 @@ static int ipr_reset_ucode_download(struct ipr_cmnd *ipr_cmd)
 	ipr_cmd->ioarcb.cmd_pkt.cdb[7] = (sglist->buffer_len & 0x00ff00) >> 8;
 	ipr_cmd->ioarcb.cmd_pkt.cdb[8] = sglist->buffer_len & 0x0000ff;
 
-	ipr_build_ucode_ioadl(ipr_cmd, sglist);
+	if (ioa_cfg->sis64)
+		ipr_build_ucode_ioadl64(ipr_cmd, sglist);
+	else
+		ipr_build_ucode_ioadl(ipr_cmd, sglist);
 	ipr_cmd->job_step = ipr_reset_ucode_download_done;
 
 	ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout,
@@ -7154,8 +7960,8 @@ static void ipr_free_mem(struct ipr_ioa_cfg *ioa_cfg)
 	ipr_free_cmd_blks(ioa_cfg);
 	pci_free_consistent(ioa_cfg->pdev, sizeof(u32) * IPR_NUM_CMD_BLKS,
 			    ioa_cfg->host_rrq, ioa_cfg->host_rrq_dma);
-	pci_free_consistent(ioa_cfg->pdev, sizeof(struct ipr_config_table),
-			    ioa_cfg->cfg_table,
+	pci_free_consistent(ioa_cfg->pdev, ioa_cfg->cfg_table_size,
+			    ioa_cfg->u.cfg_table,
 			    ioa_cfg->cfg_table_dma);
 
 	for (i = 0; i < IPR_NUM_HCAMS; i++) {
@@ -7209,7 +8015,7 @@ static int __devinit ipr_alloc_cmd_blks(struct ipr_ioa_cfg *ioa_cfg)
 	int i;
 
 	ioa_cfg->ipr_cmd_pool = pci_pool_create (IPR_NAME, ioa_cfg->pdev,
-						 sizeof(struct ipr_cmnd), 8, 0);
+						 sizeof(struct ipr_cmnd), 16, 0);
 
 	if (!ioa_cfg->ipr_cmd_pool)
 		return -ENOMEM;
@@ -7227,13 +8033,25 @@ static int __devinit ipr_alloc_cmd_blks(struct ipr_ioa_cfg *ioa_cfg)
 		ioa_cfg->ipr_cmnd_list_dma[i] = dma_addr;
 
 		ioarcb = &ipr_cmd->ioarcb;
-		ioarcb->ioarcb_host_pci_addr = cpu_to_be32(dma_addr);
+		ipr_cmd->dma_addr = dma_addr;
+		if (ioa_cfg->sis64)
+			ioarcb->a.ioarcb_host_pci_addr64 = cpu_to_be64(dma_addr);
+		else
+			ioarcb->a.ioarcb_host_pci_addr = cpu_to_be32(dma_addr);
+
 		ioarcb->host_response_handle = cpu_to_be32(i << 2);
-		ioarcb->write_ioadl_addr =
-			cpu_to_be32(dma_addr + offsetof(struct ipr_cmnd, ioadl));
-		ioarcb->read_ioadl_addr = ioarcb->write_ioadl_addr;
-		ioarcb->ioasa_host_pci_addr =
-			cpu_to_be32(dma_addr + offsetof(struct ipr_cmnd, ioasa));
+		if (ioa_cfg->sis64) {
+			ioarcb->u.sis64_addr_data.data_ioadl_addr =
+				cpu_to_be64(dma_addr + offsetof(struct ipr_cmnd, i.ioadl64));
+			ioarcb->u.sis64_addr_data.ioasa_host_pci_addr =
+				cpu_to_be64(dma_addr + offsetof(struct ipr_cmnd, ioasa));
+		} else {
+			ioarcb->write_ioadl_addr =
+				cpu_to_be32(dma_addr + offsetof(struct ipr_cmnd, i.ioadl));
+			ioarcb->read_ioadl_addr = ioarcb->write_ioadl_addr;
+			ioarcb->ioasa_host_pci_addr =
+				cpu_to_be32(dma_addr + offsetof(struct ipr_cmnd, ioasa));
+		}
 		ioarcb->ioasa_len = cpu_to_be16(sizeof(struct ipr_ioasa));
 		ipr_cmd->cmd_index = i;
 		ipr_cmd->ioa_cfg = ioa_cfg;
@@ -7260,13 +8078,24 @@ static int __devinit ipr_alloc_mem(struct ipr_ioa_cfg *ioa_cfg)
 
 	ENTER;
 	ioa_cfg->res_entries = kzalloc(sizeof(struct ipr_resource_entry) *
-				       IPR_MAX_PHYSICAL_DEVS, GFP_KERNEL);
+				       ioa_cfg->max_devs_supported, GFP_KERNEL);
 
 	if (!ioa_cfg->res_entries)
 		goto out;
 
-	for (i = 0; i < IPR_MAX_PHYSICAL_DEVS; i++)
+	if (ioa_cfg->sis64) {
+		ioa_cfg->target_ids = kzalloc(sizeof(unsigned long) *
+					      BITS_TO_LONGS(ioa_cfg->max_devs_supported), GFP_KERNEL);
+		ioa_cfg->array_ids = kzalloc(sizeof(unsigned long) *
+					     BITS_TO_LONGS(ioa_cfg->max_devs_supported), GFP_KERNEL);
+		ioa_cfg->vset_ids = kzalloc(sizeof(unsigned long) *
+					    BITS_TO_LONGS(ioa_cfg->max_devs_supported), GFP_KERNEL);
+	}
+
+	for (i = 0; i < ioa_cfg->max_devs_supported; i++) {
 		list_add_tail(&ioa_cfg->res_entries[i].queue, &ioa_cfg->free_res_q);
+		ioa_cfg->res_entries[i].ioa_cfg = ioa_cfg;
+	}
 
 	ioa_cfg->vpd_cbs = pci_alloc_consistent(ioa_cfg->pdev,
 						sizeof(struct ipr_misc_cbs),
@@ -7285,11 +8114,11 @@ static int __devinit ipr_alloc_mem(struct ipr_ioa_cfg *ioa_cfg)
 	if (!ioa_cfg->host_rrq)
 		goto out_ipr_free_cmd_blocks;
 
-	ioa_cfg->cfg_table = pci_alloc_consistent(ioa_cfg->pdev,
-						  sizeof(struct ipr_config_table),
-						  &ioa_cfg->cfg_table_dma);
+	ioa_cfg->u.cfg_table = pci_alloc_consistent(ioa_cfg->pdev,
+						    ioa_cfg->cfg_table_size,
+						    &ioa_cfg->cfg_table_dma);
 
-	if (!ioa_cfg->cfg_table)
+	if (!ioa_cfg->u.cfg_table)
 		goto out_free_host_rrq;
 
 	for (i = 0; i < IPR_NUM_HCAMS; i++) {
@@ -7323,8 +8152,9 @@ out_free_hostrcb_dma:
 				    ioa_cfg->hostrcb[i],
 				    ioa_cfg->hostrcb_dma[i]);
 	}
-	pci_free_consistent(pdev, sizeof(struct ipr_config_table),
-			    ioa_cfg->cfg_table, ioa_cfg->cfg_table_dma);
+	pci_free_consistent(pdev, ioa_cfg->cfg_table_size,
+			    ioa_cfg->u.cfg_table,
+			    ioa_cfg->cfg_table_dma);
 out_free_host_rrq:
 	pci_free_consistent(pdev, sizeof(u32) * IPR_NUM_CMD_BLKS,
 			    ioa_cfg->host_rrq, ioa_cfg->host_rrq_dma);
@@ -7399,15 +8229,21 @@ static void __devinit ipr_init_ioa_cfg(struct ipr_ioa_cfg *ioa_cfg,
 	init_waitqueue_head(&ioa_cfg->reset_wait_q);
 	init_waitqueue_head(&ioa_cfg->msi_wait_q);
 	ioa_cfg->sdt_state = INACTIVE;
-	if (ipr_enable_cache)
-		ioa_cfg->cache_state = CACHE_ENABLED;
-	else
-		ioa_cfg->cache_state = CACHE_DISABLED;
 
 	ipr_initialize_bus_attr(ioa_cfg);
+	ioa_cfg->max_devs_supported = ipr_max_devs;
 
-	host->max_id = IPR_MAX_NUM_TARGETS_PER_BUS;
-	host->max_lun = IPR_MAX_NUM_LUNS_PER_TARGET;
+	if (ioa_cfg->sis64) {
+		host->max_id = IPR_MAX_SIS64_TARGETS_PER_BUS;
+		host->max_lun = IPR_MAX_SIS64_LUNS_PER_TARGET;
+		if (ipr_max_devs > IPR_MAX_SIS64_DEVS)
+			ioa_cfg->max_devs_supported = IPR_MAX_SIS64_DEVS;
+	} else {
+		host->max_id = IPR_MAX_NUM_TARGETS_PER_BUS;
+		host->max_lun = IPR_MAX_NUM_LUNS_PER_TARGET;
+		if (ipr_max_devs > IPR_MAX_PHYSICAL_DEVS)
+			ioa_cfg->max_devs_supported = IPR_MAX_PHYSICAL_DEVS;
+	}
 	host->max_channel = IPR_MAX_BUS_TO_SCAN;
 	host->unique_id = host->host_no;
 	host->max_cmd_len = IPR_MAX_CDB_LEN;
@@ -7419,13 +8255,26 @@ static void __devinit ipr_init_ioa_cfg(struct ipr_ioa_cfg *ioa_cfg,
 
 	t->set_interrupt_mask_reg = base + p->set_interrupt_mask_reg;
 	t->clr_interrupt_mask_reg = base + p->clr_interrupt_mask_reg;
+	t->clr_interrupt_mask_reg32 = base + p->clr_interrupt_mask_reg32;
 	t->sense_interrupt_mask_reg = base + p->sense_interrupt_mask_reg;
+	t->sense_interrupt_mask_reg32 = base + p->sense_interrupt_mask_reg32;
 	t->clr_interrupt_reg = base + p->clr_interrupt_reg;
+	t->clr_interrupt_reg32 = base + p->clr_interrupt_reg32;
 	t->sense_interrupt_reg = base + p->sense_interrupt_reg;
+	t->sense_interrupt_reg32 = base + p->sense_interrupt_reg32;
 	t->ioarrin_reg = base + p->ioarrin_reg;
 	t->sense_uproc_interrupt_reg = base + p->sense_uproc_interrupt_reg;
+	t->sense_uproc_interrupt_reg32 = base + p->sense_uproc_interrupt_reg32;
 	t->set_uproc_interrupt_reg = base + p->set_uproc_interrupt_reg;
+	t->set_uproc_interrupt_reg32 = base + p->set_uproc_interrupt_reg32;
 	t->clr_uproc_interrupt_reg = base + p->clr_uproc_interrupt_reg;
+	t->clr_uproc_interrupt_reg32 = base + p->clr_uproc_interrupt_reg32;
+
+	if (ioa_cfg->sis64) {
+		t->init_feedback_reg = base + p->init_feedback_reg;
+		t->dump_addr_reg = base + p->dump_addr_reg;
+		t->dump_data_reg = base + p->dump_data_reg;
+	}
 }
 
 /**
@@ -7497,7 +8346,7 @@ static int __devinit ipr_test_msi(struct ipr_ioa_cfg *ioa_cfg,
 	init_waitqueue_head(&ioa_cfg->msi_wait_q);
 	ioa_cfg->msi_received = 0;
 	ipr_mask_and_clear_interrupts(ioa_cfg, ~IPR_PCII_IOA_TRANS_TO_OPER);
-	writel(IPR_PCII_IO_DEBUG_ACKNOWLEDGE, ioa_cfg->regs.clr_interrupt_mask_reg);
+	writel(IPR_PCII_IO_DEBUG_ACKNOWLEDGE, ioa_cfg->regs.clr_interrupt_mask_reg32);
 	int_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg);
 	spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
 
@@ -7508,7 +8357,7 @@ static int __devinit ipr_test_msi(struct ipr_ioa_cfg *ioa_cfg,
 	} else if (ipr_debug)
 		dev_info(&pdev->dev, "IRQ assigned: %d\n", pdev->irq);
 
-	writel(IPR_PCII_IO_DEBUG_ACKNOWLEDGE, ioa_cfg->regs.sense_interrupt_reg);
+	writel(IPR_PCII_IO_DEBUG_ACKNOWLEDGE, ioa_cfg->regs.sense_interrupt_reg32);
 	int_reg = readl(ioa_cfg->regs.sense_interrupt_reg);
 	wait_event_timeout(ioa_cfg->msi_wait_q, ioa_cfg->msi_received, HZ);
 	ipr_mask_and_clear_interrupts(ioa_cfg, ~IPR_PCII_IOA_TRANS_TO_OPER);
@@ -7578,6 +8427,8 @@ static int __devinit ipr_probe_ioa(struct pci_dev *pdev,
 		goto out_scsi_host_put;
 	}
 
+	/* set SIS 32 or SIS 64 */
+	ioa_cfg->sis64 = ioa_cfg->ipr_chip->sis_type == IPR_SIS64 ? 1 : 0;
 	ioa_cfg->chip_cfg = ioa_cfg->ipr_chip->cfg;
 
 	if (ipr_transop_timeout)
@@ -7615,7 +8466,16 @@ static int __devinit ipr_probe_ioa(struct pci_dev *pdev,
 
 	pci_set_master(pdev);
 
-	rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+	if (ioa_cfg->sis64) {
+		rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
+		if (rc < 0) {
+			dev_dbg(&pdev->dev, "Failed to set 64 bit PCI DMA mask\n");
+			rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+		}
+
+	} else
+		rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+
 	if (rc < 0) {
 		dev_err(&pdev->dev, "Failed to set PCI DMA mask\n");
 		goto cleanup_nomem;
@@ -7657,6 +8517,15 @@ static int __devinit ipr_probe_ioa(struct pci_dev *pdev,
 	if ((rc = ipr_set_pcix_cmd_reg(ioa_cfg)))
 		goto cleanup_nomem;
 
+	if (ioa_cfg->sis64)
+		ioa_cfg->cfg_table_size = (sizeof(struct ipr_config_table_hdr64)
+				+ ((sizeof(struct ipr_config_table_entry64)
+				* ioa_cfg->max_devs_supported)));
+	else
+		ioa_cfg->cfg_table_size = (sizeof(struct ipr_config_table_hdr)
+				+ ((sizeof(struct ipr_config_table_entry)
+				* ioa_cfg->max_devs_supported)));
+
 	rc = ipr_alloc_mem(ioa_cfg);
 	if (rc < 0) {
 		dev_err(&pdev->dev,
@@ -7668,9 +8537,9 @@ static int __devinit ipr_probe_ioa(struct pci_dev *pdev,
 	 * If HRRQ updated interrupt is not masked, or reset alert is set,
 	 * the card is in an unknown state and needs a hard reset
 	 */
-	mask = readl(ioa_cfg->regs.sense_interrupt_mask_reg);
-	interrupts = readl(ioa_cfg->regs.sense_interrupt_reg);
-	uproc = readl(ioa_cfg->regs.sense_uproc_interrupt_reg);
+	mask = readl(ioa_cfg->regs.sense_interrupt_mask_reg32);
+	interrupts = readl(ioa_cfg->regs.sense_interrupt_reg32);
+	uproc = readl(ioa_cfg->regs.sense_uproc_interrupt_reg32);
 	if ((mask & IPR_PCII_HRRQ_UPDATED) == 0 || (uproc & IPR_UPROCI_RESET_ALERT))
 		ioa_cfg->needs_hard_reset = 1;
 	if (interrupts & IPR_PCII_ERROR_INTERRUPTS)
@@ -7958,9 +8827,6 @@ static struct pci_device_id ipr_pci_table[] __devinitdata = {
 	      PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_574E, 0, 0,
 	      IPR_USE_LONG_TRANSOP_TIMEOUT },
 	{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN_E,
-	      PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_575D, 0, 0,
-	      IPR_USE_LONG_TRANSOP_TIMEOUT },
-	{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN_E,
 	      PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57B3, 0, 0, 0 },
 	{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN_E,
 	      PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57B7, 0, 0,
@@ -7975,9 +8841,22 @@ static struct pci_device_id ipr_pci_table[] __devinitdata = {
 	{ PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_SCAMP,
 		PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_572F, 0, 0,
 		IPR_USE_LONG_TRANSOP_TIMEOUT },
-	{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_SCAMP_E,
-		PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_574D, 0, 0,
-		IPR_USE_LONG_TRANSOP_TIMEOUT },
+	{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROC_FPGA_E2,
+		PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57B5, 0, 0, 0 },
+	{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROC_FPGA_E2,
+		PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_574D, 0, 0, 0 },
+	{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROC_FPGA_E2,
+		PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57B2, 0, 0, 0 },
+	{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROC_ASIC_E2,
+		PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57B4, 0, 0, 0 },
+	{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROC_ASIC_E2,
+		PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57B1, 0, 0, 0 },
+	{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROC_ASIC_E2,
+		PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57C6, 0, 0, 0 },
+	{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROC_ASIC_E2,
+		PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_575D, 0, 0, 0 },
+	{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROC_ASIC_E2,
+		PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57CE, 0, 0, 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(pci, ipr_pci_table);
@@ -7997,6 +8876,61 @@ static struct pci_driver ipr_driver = {
 };
 
 /**
+ * ipr_halt_done - Shutdown prepare completion
+ *
+ * Return value:
+ * 	none
+ **/
+static void ipr_halt_done(struct ipr_cmnd *ipr_cmd)
+{
+	struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
+
+	list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
+}
+
+/**
+ * ipr_halt - Issue shutdown prepare to all adapters
+ *
+ * Return value:
+ * 	NOTIFY_OK on success / NOTIFY_DONE on failure
+ **/
+static int ipr_halt(struct notifier_block *nb, ulong event, void *buf)
+{
+	struct ipr_cmnd *ipr_cmd;
+	struct ipr_ioa_cfg *ioa_cfg;
+	unsigned long flags = 0;
+
+	if (event != SYS_RESTART && event != SYS_HALT && event != SYS_POWER_OFF)
+		return NOTIFY_DONE;
+
+	spin_lock(&ipr_driver_lock);
+
+	list_for_each_entry(ioa_cfg, &ipr_ioa_head, queue) {
+		spin_lock_irqsave(ioa_cfg->host->host_lock, flags);
+		if (!ioa_cfg->allow_cmds) {
+			spin_unlock_irqrestore(ioa_cfg->host->host_lock, flags);
+			continue;
+		}
+
+		ipr_cmd = ipr_get_free_ipr_cmnd(ioa_cfg);
+		ipr_cmd->ioarcb.res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE);
+		ipr_cmd->ioarcb.cmd_pkt.request_type = IPR_RQTYPE_IOACMD;
+		ipr_cmd->ioarcb.cmd_pkt.cdb[0] = IPR_IOA_SHUTDOWN;
+		ipr_cmd->ioarcb.cmd_pkt.cdb[1] = IPR_SHUTDOWN_PREPARE_FOR_NORMAL;
+
+		ipr_do_req(ipr_cmd, ipr_halt_done, ipr_timeout, IPR_DEVICE_RESET_TIMEOUT);
+		spin_unlock_irqrestore(ioa_cfg->host->host_lock, flags);
+	}
+	spin_unlock(&ipr_driver_lock);
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block ipr_notifier = {
+	ipr_halt, NULL, 0
+};
+
+/**
  * ipr_init - Module entry point
  *
  * Return value:
@@ -8007,6 +8941,7 @@ static int __init ipr_init(void)
 	ipr_info("IBM Power RAID SCSI Device Driver version: %s %s\n",
 		 IPR_DRIVER_VERSION, IPR_DRIVER_DATE);
 
+	register_reboot_notifier(&ipr_notifier);
 	return pci_register_driver(&ipr_driver);
 }
 
@@ -8020,6 +8955,7 @@ static int __init ipr_init(void)
  **/
 static void __exit ipr_exit(void)
 {
+	unregister_reboot_notifier(&ipr_notifier);
 	pci_unregister_driver(&ipr_driver);
 }
 
diff --git a/drivers/scsi/ipr.h b/drivers/scsi/ipr.h
index 19bbcf39f0c9..4c267b5e0b96 100644
--- a/drivers/scsi/ipr.h
+++ b/drivers/scsi/ipr.h
@@ -37,8 +37,8 @@
 /*
  * Literals
  */
-#define IPR_DRIVER_VERSION "2.4.3"
-#define IPR_DRIVER_DATE "(June 10, 2009)"
+#define IPR_DRIVER_VERSION "2.5.0"
+#define IPR_DRIVER_DATE "(February 11, 2010)"
 
 /*
  * IPR_MAX_CMD_PER_LUN: This defines the maximum number of outstanding
@@ -55,7 +55,9 @@
 #define IPR_NUM_BASE_CMD_BLKS				100
 
 #define PCI_DEVICE_ID_IBM_OBSIDIAN_E	0x0339
-#define PCI_DEVICE_ID_IBM_SCAMP_E		0x034A
+
+#define PCI_DEVICE_ID_IBM_CROC_FPGA_E2          0x033D
+#define PCI_DEVICE_ID_IBM_CROC_ASIC_E2          0x034A
 
 #define IPR_SUBS_DEV_ID_2780	0x0264
 #define IPR_SUBS_DEV_ID_5702	0x0266
@@ -70,15 +72,24 @@
 #define IPR_SUBS_DEV_ID_572A	0x02C1
 #define IPR_SUBS_DEV_ID_572B	0x02C2
 #define IPR_SUBS_DEV_ID_572F	0x02C3
-#define IPR_SUBS_DEV_ID_574D	0x030B
 #define IPR_SUBS_DEV_ID_574E	0x030A
 #define IPR_SUBS_DEV_ID_575B	0x030D
 #define IPR_SUBS_DEV_ID_575C	0x0338
-#define IPR_SUBS_DEV_ID_575D	0x033E
 #define IPR_SUBS_DEV_ID_57B3	0x033A
 #define IPR_SUBS_DEV_ID_57B7	0x0360
 #define IPR_SUBS_DEV_ID_57B8	0x02C2
 
+#define IPR_SUBS_DEV_ID_57B4    0x033B
+#define IPR_SUBS_DEV_ID_57B2    0x035F
+#define IPR_SUBS_DEV_ID_57C6    0x0357
+
+#define IPR_SUBS_DEV_ID_57B5    0x033C
+#define IPR_SUBS_DEV_ID_57CE    0x035E
+#define IPR_SUBS_DEV_ID_57B1    0x0355
+
+#define IPR_SUBS_DEV_ID_574D    0x0356
+#define IPR_SUBS_DEV_ID_575D    0x035D
+
 #define IPR_NAME				"ipr"
 
 /*
@@ -118,6 +129,10 @@
 #define IPR_NUM_LOG_HCAMS				2
 #define IPR_NUM_CFG_CHG_HCAMS				2
 #define IPR_NUM_HCAMS	(IPR_NUM_LOG_HCAMS + IPR_NUM_CFG_CHG_HCAMS)
+
+#define IPR_MAX_SIS64_TARGETS_PER_BUS			1024
+#define IPR_MAX_SIS64_LUNS_PER_TARGET			0xffffffff
+
 #define IPR_MAX_NUM_TARGETS_PER_BUS			256
 #define IPR_MAX_NUM_LUNS_PER_TARGET			256
 #define IPR_MAX_NUM_VSET_LUNS_PER_TARGET	8
@@ -132,13 +147,15 @@
 
 /* We need resources for HCAMS, IOA reset, IOA bringdown, and ERP */
 #define IPR_NUM_INTERNAL_CMD_BLKS	(IPR_NUM_HCAMS + \
-                                     ((IPR_NUM_RESET_RELOAD_RETRIES + 1) * 2) + 3)
+                                     ((IPR_NUM_RESET_RELOAD_RETRIES + 1) * 2) + 4)
 
 #define IPR_MAX_COMMANDS		IPR_NUM_BASE_CMD_BLKS
 #define IPR_NUM_CMD_BLKS		(IPR_NUM_BASE_CMD_BLKS + \
 						IPR_NUM_INTERNAL_CMD_BLKS)
 
 #define IPR_MAX_PHYSICAL_DEVS				192
+#define IPR_DEFAULT_SIS64_DEVS				1024
+#define IPR_MAX_SIS64_DEVS				4096
 
 #define IPR_MAX_SGLIST					64
 #define IPR_IOA_MAX_SECTORS				32767
@@ -173,6 +190,7 @@
 #define	IPR_HCAM_CDB_OP_CODE_CONFIG_CHANGE	0x01
 #define	IPR_HCAM_CDB_OP_CODE_LOG_DATA		0x02
 #define IPR_SET_SUPPORTED_DEVICES			0xFB
+#define IPR_SET_ALL_SUPPORTED_DEVICES			0x80
 #define IPR_IOA_SHUTDOWN				0xF7
 #define	IPR_WR_BUF_DOWNLOAD_AND_SAVE			0x05
 
@@ -221,9 +239,17 @@
 #define IPR_SDT_FMT2_BAR5_SEL				0x5
 #define IPR_SDT_FMT2_EXP_ROM_SEL			0x8
 #define IPR_FMT2_SDT_READY_TO_USE			0xC4D4E3F2
+#define IPR_FMT3_SDT_READY_TO_USE			0xC4D4E3F3
 #define IPR_DOORBELL					0x82800000
 #define IPR_RUNTIME_RESET				0x40000000
 
+#define IPR_IPL_INIT_MIN_STAGE_TIME			5
+#define IPR_IPL_INIT_STAGE_UNKNOWN			0x0
+#define IPR_IPL_INIT_STAGE_TRANSOP			0xB0000000
+#define IPR_IPL_INIT_STAGE_MASK				0xff000000
+#define IPR_IPL_INIT_STAGE_TIME_MASK			0x0000ffff
+#define IPR_PCII_IPL_STAGE_CHANGE			(0x80000000 >> 0)
+
 #define IPR_PCII_IOA_TRANS_TO_OPER			(0x80000000 >> 0)
 #define IPR_PCII_IOARCB_XFER_FAILED			(0x80000000 >> 3)
 #define IPR_PCII_IOA_UNIT_CHECKED			(0x80000000 >> 4)
@@ -318,27 +344,27 @@ struct ipr_std_inq_data {
 	u8 serial_num[IPR_SERIAL_NUM_LEN];
 }__attribute__ ((packed));
 
+#define IPR_RES_TYPE_AF_DASD		0x00
+#define IPR_RES_TYPE_GENERIC_SCSI	0x01
+#define IPR_RES_TYPE_VOLUME_SET		0x02
+#define IPR_RES_TYPE_REMOTE_AF_DASD	0x03
+#define IPR_RES_TYPE_GENERIC_ATA	0x04
+#define IPR_RES_TYPE_ARRAY		0x05
+#define IPR_RES_TYPE_IOAFP		0xff
+
 struct ipr_config_table_entry {
 	u8 proto;
 #define IPR_PROTO_SATA			0x02
 #define IPR_PROTO_SATA_ATAPI		0x03
 #define IPR_PROTO_SAS_STP		0x06
-#define IPR_PROTO_SAS_STP_ATAPI	0x07
+#define IPR_PROTO_SAS_STP_ATAPI		0x07
 	u8 array_id;
 	u8 flags;
-#define IPR_IS_IOA_RESOURCE	0x80
-#define IPR_IS_ARRAY_MEMBER 0x20
-#define IPR_IS_HOT_SPARE	0x10
-
+#define IPR_IS_IOA_RESOURCE		0x80
 	u8 rsvd_subtype;
-#define IPR_RES_SUBTYPE(res) (((res)->cfgte.rsvd_subtype) & 0x0f)
-#define IPR_SUBTYPE_AF_DASD			0
-#define IPR_SUBTYPE_GENERIC_SCSI	1
-#define IPR_SUBTYPE_VOLUME_SET		2
-#define IPR_SUBTYPE_GENERIC_ATA	4
-
-#define IPR_QUEUEING_MODEL(res)	((((res)->cfgte.flags) & 0x70) >> 4)
-#define IPR_QUEUE_FROZEN_MODEL	0
+
+#define IPR_QUEUEING_MODEL(res)	((((res)->flags) & 0x70) >> 4)
+#define IPR_QUEUE_FROZEN_MODEL		0
 #define IPR_QUEUE_NACA_MODEL		1
 
 	struct ipr_res_addr res_addr;
@@ -347,6 +373,28 @@ struct ipr_config_table_entry {
 	struct ipr_std_inq_data std_inq_data;
 }__attribute__ ((packed, aligned (4)));
 
+struct ipr_config_table_entry64 {
+	u8 res_type;
+	u8 proto;
+	u8 vset_num;
+	u8 array_id;
+	__be16 flags;
+	__be16 res_flags;
+#define IPR_QUEUEING_MODEL64(res) ((((res)->res_flags) & 0x7000) >> 12)
+	__be32 res_handle;
+	u8 dev_id_type;
+	u8 reserved[3];
+	__be64 dev_id;
+	__be64 lun;
+	__be64 lun_wwn[2];
+#define IPR_MAX_RES_PATH_LENGTH		24
+	__be64 res_path;
+	struct ipr_std_inq_data std_inq_data;
+	u8 reserved2[4];
+	__be64 reserved3[2]; // description text
+	u8 reserved4[8];
+}__attribute__ ((packed, aligned (8)));
+
 struct ipr_config_table_hdr {
 	u8 num_entries;
 	u8 flags;
@@ -354,13 +402,35 @@ struct ipr_config_table_hdr {
 	__be16 reserved;
 }__attribute__((packed, aligned (4)));
 
+struct ipr_config_table_hdr64 {
+	__be16 num_entries;
+	__be16 reserved;
+	u8 flags;
+	u8 reserved2[11];
+}__attribute__((packed, aligned (4)));
+
 struct ipr_config_table {
 	struct ipr_config_table_hdr hdr;
-	struct ipr_config_table_entry dev[IPR_MAX_PHYSICAL_DEVS];
+	struct ipr_config_table_entry dev[0];
 }__attribute__((packed, aligned (4)));
 
+struct ipr_config_table64 {
+	struct ipr_config_table_hdr64 hdr64;
+	struct ipr_config_table_entry64 dev[0];
+}__attribute__((packed, aligned (8)));
+
+struct ipr_config_table_entry_wrapper {
+	union {
+		struct ipr_config_table_entry *cfgte;
+		struct ipr_config_table_entry64 *cfgte64;
+	} u;
+};
+
 struct ipr_hostrcb_cfg_ch_not {
-	struct ipr_config_table_entry cfgte;
+	union {
+		struct ipr_config_table_entry cfgte;
+		struct ipr_config_table_entry64 cfgte64;
+	} u;
 	u8 reserved[936];
 }__attribute__((packed, aligned (4)));
 
@@ -381,7 +451,7 @@ struct ipr_cmd_pkt {
 #define IPR_RQTYPE_HCAM			0x02
 #define IPR_RQTYPE_ATA_PASSTHRU	0x04
 
-	u8 luntar_luntrn;
+	u8 reserved2;
 
 	u8 flags_hi;
 #define IPR_FLAGS_HI_WRITE_NOT_READ		0x80
@@ -403,7 +473,7 @@ struct ipr_cmd_pkt {
 	__be16 timeout;
 }__attribute__ ((packed, aligned(4)));
 
-struct ipr_ioarcb_ata_regs {
+struct ipr_ioarcb_ata_regs {	/* 22 bytes */
 	u8 flags;
 #define IPR_ATA_FLAG_PACKET_CMD			0x80
 #define IPR_ATA_FLAG_XFER_TYPE_DMA			0x40
@@ -442,28 +512,49 @@ struct ipr_ioadl_desc {
 	__be32 address;
 }__attribute__((packed, aligned (8)));
 
+struct ipr_ioadl64_desc {
+	__be32 flags;
+	__be32 data_len;
+	__be64 address;
+}__attribute__((packed, aligned (16)));
+
+struct ipr_ata64_ioadl {
+	struct ipr_ioarcb_ata_regs regs;
+	u16 reserved[5];
+	struct ipr_ioadl64_desc ioadl64[IPR_NUM_IOADL_ENTRIES];
+}__attribute__((packed, aligned (16)));
+
 struct ipr_ioarcb_add_data {
 	union {
 		struct ipr_ioarcb_ata_regs regs;
 		struct ipr_ioadl_desc ioadl[5];
 		__be32 add_cmd_parms[10];
-	}u;
-}__attribute__ ((packed, aligned(4)));
+	} u;
+}__attribute__ ((packed, aligned (4)));
+
+struct ipr_ioarcb_sis64_add_addr_ecb {
+	__be64 ioasa_host_pci_addr;
+	__be64 data_ioadl_addr;
+	__be64 reserved;
+	__be32 ext_control_buf[4];
+}__attribute__((packed, aligned (8)));
 
 /* IOA Request Control Block    128 bytes  */
 struct ipr_ioarcb {
-	__be32 ioarcb_host_pci_addr;
-	__be32 reserved;
+	union {
+		__be32 ioarcb_host_pci_addr;
+		__be64 ioarcb_host_pci_addr64;
+	} a;
 	__be32 res_handle;
 	__be32 host_response_handle;
 	__be32 reserved1;
 	__be32 reserved2;
 	__be32 reserved3;
 
-	__be32 write_data_transfer_length;
+	__be32 data_transfer_length;
 	__be32 read_data_transfer_length;
 	__be32 write_ioadl_addr;
-	__be32 write_ioadl_len;
+	__be32 ioadl_len;
 	__be32 read_ioadl_addr;
 	__be32 read_ioadl_len;
 
@@ -473,8 +564,14 @@ struct ipr_ioarcb {
 
 	struct ipr_cmd_pkt cmd_pkt;
 
-	__be32 add_cmd_parms_len;
-	struct ipr_ioarcb_add_data add_data;
+	__be16 add_cmd_parms_offset;
+	__be16 add_cmd_parms_len;
+
+	union {
+		struct ipr_ioarcb_add_data add_data;
+		struct ipr_ioarcb_sis64_add_addr_ecb sis64_addr_data;
+	} u;
+
 }__attribute__((packed, aligned (4)));
 
 struct ipr_ioasa_vset {
@@ -676,12 +773,29 @@ struct ipr_hostrcb_device_data_entry_enhanced {
 	struct ipr_ext_vpd cfc_last_with_dev_vpd;
 }__attribute__((packed, aligned (4)));
 
+struct ipr_hostrcb64_device_data_entry_enhanced {
+	struct ipr_ext_vpd vpd;
+	u8 ccin[4];
+	u8 res_path[8];
+	struct ipr_ext_vpd new_vpd;
+	u8 new_ccin[4];
+	struct ipr_ext_vpd ioa_last_with_dev_vpd;
+	struct ipr_ext_vpd cfc_last_with_dev_vpd;
+}__attribute__((packed, aligned (4)));
+
 struct ipr_hostrcb_array_data_entry {
 	struct ipr_vpd vpd;
 	struct ipr_res_addr expected_dev_res_addr;
 	struct ipr_res_addr dev_res_addr;
 }__attribute__((packed, aligned (4)));
 
+struct ipr_hostrcb64_array_data_entry {
+	struct ipr_ext_vpd vpd;
+	u8 ccin[4];
+	u8 expected_res_path[8];
+	u8 res_path[8];
+}__attribute__((packed, aligned (4)));
+
 struct ipr_hostrcb_array_data_entry_enhanced {
 	struct ipr_ext_vpd vpd;
 	u8 ccin[4];
@@ -733,6 +847,14 @@ struct ipr_hostrcb_type_13_error {
 	struct ipr_hostrcb_device_data_entry_enhanced dev[3];
 }__attribute__((packed, aligned (4)));
 
+struct ipr_hostrcb_type_23_error {
+	struct ipr_ext_vpd ioa_vpd;
+	struct ipr_ext_vpd cfc_vpd;
+	__be32 errors_detected;
+	__be32 errors_logged;
+	struct ipr_hostrcb64_device_data_entry_enhanced dev[3];
+}__attribute__((packed, aligned (4)));
+
 struct ipr_hostrcb_type_04_error {
 	struct ipr_vpd ioa_vpd;
 	struct ipr_vpd cfc_vpd;
@@ -760,6 +882,22 @@ struct ipr_hostrcb_type_14_error {
 	struct ipr_hostrcb_array_data_entry_enhanced array_member[18];
 }__attribute__((packed, aligned (4)));
 
+struct ipr_hostrcb_type_24_error {
+	struct ipr_ext_vpd ioa_vpd;
+	struct ipr_ext_vpd cfc_vpd;
+	u8 reserved[2];
+	u8 exposed_mode_adn;
+#define IPR_INVALID_ARRAY_DEV_NUM		0xff
+	u8 array_id;
+	u8 last_res_path[8];
+	u8 protection_level[8];
+	struct ipr_ext_vpd array_vpd;
+	u8 description[16];
+	u8 reserved2[3];
+	u8 num_entries;
+	struct ipr_hostrcb64_array_data_entry array_member[32];
+}__attribute__((packed, aligned (4)));
+
 struct ipr_hostrcb_type_07_error {
 	u8 failure_reason[64];
 	struct ipr_vpd vpd;
@@ -797,6 +935,22 @@ struct ipr_hostrcb_config_element {
 	__be32 wwid[2];
 }__attribute__((packed, aligned (4)));
 
+struct ipr_hostrcb64_config_element {
+	__be16 length;
+	u8 descriptor_id;
+#define IPR_DESCRIPTOR_MASK		0xC0
+#define IPR_DESCRIPTOR_SIS64		0x00
+
+	u8 reserved;
+	u8 type_status;
+
+	u8 reserved2[2];
+	u8 link_rate;
+
+	u8 res_path[8];
+	__be32 wwid[2];
+}__attribute__((packed, aligned (8)));
+
 struct ipr_hostrcb_fabric_desc {
 	__be16 length;
 	u8 ioa_port;
@@ -818,6 +972,20 @@ struct ipr_hostrcb_fabric_desc {
 	struct ipr_hostrcb_config_element elem[1];
 }__attribute__((packed, aligned (4)));
 
+struct ipr_hostrcb64_fabric_desc {
+	__be16 length;
+	u8 descriptor_id;
+
+	u8 reserved;
+	u8 path_state;
+
+	u8 reserved2[2];
+	u8 res_path[8];
+	u8 reserved3[6];
+	__be16 num_entries;
+	struct ipr_hostrcb64_config_element elem[1];
+}__attribute__((packed, aligned (8)));
+
 #define for_each_fabric_cfg(fabric, cfg) \
 		for (cfg = (fabric)->elem; \
 			cfg < ((fabric)->elem + be16_to_cpu((fabric)->num_entries)); \
@@ -830,10 +998,17 @@ struct ipr_hostrcb_type_20_error {
 	struct ipr_hostrcb_fabric_desc desc[1];
 }__attribute__((packed, aligned (4)));
 
+struct ipr_hostrcb_type_30_error {
+	u8 failure_reason[64];
+	u8 reserved[3];
+	u8 num_entries;
+	struct ipr_hostrcb64_fabric_desc desc[1];
+}__attribute__((packed, aligned (4)));
+
 struct ipr_hostrcb_error {
-	__be32 failing_dev_ioasc;
-	struct ipr_res_addr failing_dev_res_addr;
-	__be32 failing_dev_res_handle;
+	__be32 fd_ioasc;
+	struct ipr_res_addr fd_res_addr;
+	__be32 fd_res_handle;
 	__be32 prc;
 	union {
 		struct ipr_hostrcb_type_ff_error type_ff_error;
@@ -850,6 +1025,26 @@ struct ipr_hostrcb_error {
 	} u;
 }__attribute__((packed, aligned (4)));
 
+struct ipr_hostrcb64_error {
+	__be32 fd_ioasc;
+	__be32 ioa_fw_level;
+	__be32 fd_res_handle;
+	__be32 prc;
+	__be64 fd_dev_id;
+	__be64 fd_lun;
+	u8 fd_res_path[8];
+	__be64 time_stamp;
+	u8 reserved[2];
+	union {
+		struct ipr_hostrcb_type_ff_error type_ff_error;
+		struct ipr_hostrcb_type_12_error type_12_error;
+		struct ipr_hostrcb_type_17_error type_17_error;
+		struct ipr_hostrcb_type_23_error type_23_error;
+		struct ipr_hostrcb_type_24_error type_24_error;
+		struct ipr_hostrcb_type_30_error type_30_error;
+	} u;
+}__attribute__((packed, aligned (8)));
+
 struct ipr_hostrcb_raw {
 	__be32 data[sizeof(struct ipr_hostrcb_error)/sizeof(__be32)];
 }__attribute__((packed, aligned (4)));
@@ -887,7 +1082,11 @@ struct ipr_hcam {
 #define IPR_HOST_RCB_OVERLAY_ID_16				0x16
 #define IPR_HOST_RCB_OVERLAY_ID_17				0x17
 #define IPR_HOST_RCB_OVERLAY_ID_20				0x20
-#define IPR_HOST_RCB_OVERLAY_ID_DEFAULT			0xFF
+#define IPR_HOST_RCB_OVERLAY_ID_23				0x23
+#define IPR_HOST_RCB_OVERLAY_ID_24				0x24
+#define IPR_HOST_RCB_OVERLAY_ID_26				0x26
+#define IPR_HOST_RCB_OVERLAY_ID_30				0x30
+#define IPR_HOST_RCB_OVERLAY_ID_DEFAULT				0xFF
 
 	u8 reserved1[3];
 	__be32 ilid;
@@ -897,6 +1096,7 @@ struct ipr_hcam {
 
 	union {
 		struct ipr_hostrcb_error error;
+		struct ipr_hostrcb64_error error64;
 		struct ipr_hostrcb_cfg_ch_not ccn;
 		struct ipr_hostrcb_raw raw;
 	} u;
@@ -907,14 +1107,14 @@ struct ipr_hostrcb {
 	dma_addr_t hostrcb_dma;
 	struct list_head queue;
 	struct ipr_ioa_cfg *ioa_cfg;
+	char rp_buffer[IPR_MAX_RES_PATH_LENGTH];
 };
 
 /* IPR smart dump table structures */
 struct ipr_sdt_entry {
-	__be32 bar_str_offset;
-	__be32 end_offset;
-	u8 entry_byte;
-	u8 reserved[3];
+	__be32 start_token;
+	__be32 end_token;
+	u8 reserved[4];
 
 	u8 flags;
 #define IPR_SDT_ENDIAN		0x80
@@ -960,28 +1160,48 @@ struct ipr_sata_port {
 };
 
 struct ipr_resource_entry {
-	struct ipr_config_table_entry cfgte;
 	u8 needs_sync_complete:1;
 	u8 in_erp:1;
 	u8 add_to_ml:1;
 	u8 del_from_ml:1;
 	u8 resetting_device:1;
 
+	u32 bus;		/* AKA channel */
+	u32 target;		/* AKA id */
+	u32 lun;
+#define IPR_ARRAY_VIRTUAL_BUS			0x1
+#define IPR_VSET_VIRTUAL_BUS			0x2
+#define IPR_IOAFP_VIRTUAL_BUS			0x3
+
+#define IPR_GET_RES_PHYS_LOC(res) \
+	(((res)->bus << 24) | ((res)->target << 8) | (res)->lun)
+
+	u8 ata_class;
+
+	u8 flags;
+	__be16 res_flags;
+
+	__be32 type;
+
+	u8 qmodel;
+	struct ipr_std_inq_data std_inq_data;
+
+	__be32 res_handle;
+	__be64 dev_id;
+	struct scsi_lun dev_lun;
+	u8 res_path[8];
+
+	struct ipr_ioa_cfg *ioa_cfg;
 	struct scsi_device *sdev;
 	struct ipr_sata_port *sata_port;
 	struct list_head queue;
-};
+}; /* struct ipr_resource_entry */
 
 struct ipr_resource_hdr {
 	u16 num_entries;
 	u16 reserved;
 };
 
-struct ipr_resource_table {
-	struct ipr_resource_hdr hdr;
-	struct ipr_resource_entry dev[IPR_MAX_PHYSICAL_DEVS];
-};
-
 struct ipr_misc_cbs {
 	struct ipr_ioa_vpd ioa_vpd;
 	struct ipr_inquiry_page0 page0_data;
@@ -994,27 +1214,51 @@ struct ipr_misc_cbs {
 struct ipr_interrupt_offsets {
 	unsigned long set_interrupt_mask_reg;
 	unsigned long clr_interrupt_mask_reg;
+	unsigned long clr_interrupt_mask_reg32;
 	unsigned long sense_interrupt_mask_reg;
+	unsigned long sense_interrupt_mask_reg32;
 	unsigned long clr_interrupt_reg;
+	unsigned long clr_interrupt_reg32;
 
 	unsigned long sense_interrupt_reg;
+	unsigned long sense_interrupt_reg32;
 	unsigned long ioarrin_reg;
 	unsigned long sense_uproc_interrupt_reg;
+	unsigned long sense_uproc_interrupt_reg32;
 	unsigned long set_uproc_interrupt_reg;
+	unsigned long set_uproc_interrupt_reg32;
 	unsigned long clr_uproc_interrupt_reg;
+	unsigned long clr_uproc_interrupt_reg32;
+
+	unsigned long init_feedback_reg;
+
+	unsigned long dump_addr_reg;
+	unsigned long dump_data_reg;
 };
 
 struct ipr_interrupts {
 	void __iomem *set_interrupt_mask_reg;
 	void __iomem *clr_interrupt_mask_reg;
+	void __iomem *clr_interrupt_mask_reg32;
 	void __iomem *sense_interrupt_mask_reg;
+	void __iomem *sense_interrupt_mask_reg32;
 	void __iomem *clr_interrupt_reg;
+	void __iomem *clr_interrupt_reg32;
 
 	void __iomem *sense_interrupt_reg;
+	void __iomem *sense_interrupt_reg32;
 	void __iomem *ioarrin_reg;
 	void __iomem *sense_uproc_interrupt_reg;
+	void __iomem *sense_uproc_interrupt_reg32;
 	void __iomem *set_uproc_interrupt_reg;
+	void __iomem *set_uproc_interrupt_reg32;
 	void __iomem *clr_uproc_interrupt_reg;
+	void __iomem *clr_uproc_interrupt_reg32;
+
+	void __iomem *init_feedback_reg;
+
+	void __iomem *dump_addr_reg;
+	void __iomem *dump_data_reg;
 };
 
 struct ipr_chip_cfg_t {
@@ -1029,6 +1273,9 @@ struct ipr_chip_t {
 	u16 intr_type;
 #define IPR_USE_LSI			0x00
 #define IPR_USE_MSI			0x01
+	u16 sis_type;
+#define IPR_SIS32			0x00
+#define IPR_SIS64			0x01
 	const struct ipr_chip_cfg_t *cfg;
 };
 
@@ -1073,13 +1320,6 @@ enum ipr_sdt_state {
 	DUMP_OBTAINED
 };
 
-enum ipr_cache_state {
-	CACHE_NONE,
-	CACHE_DISABLED,
-	CACHE_ENABLED,
-	CACHE_INVALID
-};
-
 /* Per-controller data */
 struct ipr_ioa_cfg {
 	char eye_catcher[8];
@@ -1099,10 +1339,17 @@ struct ipr_ioa_cfg {
 	u8 dual_raid:1;
 	u8 needs_warm_reset:1;
 	u8 msi_received:1;
+	u8 sis64:1;
 
 	u8 revid;
 
-	enum ipr_cache_state cache_state;
+	/*
+	 * Bitmaps for SIS64 generated target values
+	 */
+	unsigned long *target_ids;
+	unsigned long *array_ids;
+	unsigned long *vset_ids;
+
 	u16 type; /* CCIN of the card */
 
 	u8 log_level;
@@ -1133,8 +1380,13 @@ struct ipr_ioa_cfg {
 
 	char cfg_table_start[8];
 #define IPR_CFG_TBL_START		"cfg"
-	struct ipr_config_table *cfg_table;
+	union {
+		struct ipr_config_table *cfg_table;
+		struct ipr_config_table64 *cfg_table64;
+	} u;
 	dma_addr_t cfg_table_dma;
+	u32 cfg_table_size;
+	u32 max_devs_supported;
 
 	char resource_table_label[8];
 #define IPR_RES_TABLE_LABEL		"res_tbl"
@@ -1202,13 +1454,17 @@ struct ipr_ioa_cfg {
 	char ipr_cmd_label[8];
 #define IPR_CMD_LABEL		"ipr_cmd"
 	struct ipr_cmnd *ipr_cmnd_list[IPR_NUM_CMD_BLKS];
-	u32 ipr_cmnd_list_dma[IPR_NUM_CMD_BLKS];
-};
+	dma_addr_t ipr_cmnd_list_dma[IPR_NUM_CMD_BLKS];
+}; /* struct ipr_ioa_cfg */
 
 struct ipr_cmnd {
 	struct ipr_ioarcb ioarcb;
+	union {
+		struct ipr_ioadl_desc ioadl[IPR_NUM_IOADL_ENTRIES];
+		struct ipr_ioadl64_desc ioadl64[IPR_NUM_IOADL_ENTRIES];
+		struct ipr_ata64_ioadl ata_ioadl;
+	} i;
 	struct ipr_ioasa ioasa;
-	struct ipr_ioadl_desc ioadl[IPR_NUM_IOADL_ENTRIES];
 	struct list_head queue;
 	struct scsi_cmnd *scsi_cmd;
 	struct ata_queued_cmd *qc;
@@ -1221,7 +1477,7 @@ struct ipr_cmnd {
 	u8 sense_buffer[SCSI_SENSE_BUFFERSIZE];
 	dma_addr_t sense_buffer_dma;
 	unsigned short dma_use_sg;
-	dma_addr_t dma_handle;
+	dma_addr_t dma_addr;
 	struct ipr_cmnd *sibling;
 	union {
 		enum ipr_shutdown_type shutdown_type;
@@ -1314,8 +1570,6 @@ struct ipr_ioa_dump {
 	u32 next_page_index;
 	u32 page_offset;
 	u32 format;
-#define IPR_SDT_FMT2		2
-#define IPR_SDT_UNKNOWN		3
 }__attribute__((packed, aligned (4)));
 
 struct ipr_dump {
@@ -1377,6 +1631,13 @@ struct ipr_ucode_image_header {
 #define ipr_info(...) printk(KERN_INFO IPR_NAME ": "__VA_ARGS__)
 #define ipr_dbg(...) IPR_DBG_CMD(printk(KERN_INFO IPR_NAME ": "__VA_ARGS__))
 
+#define ipr_res_printk(level, ioa_cfg, bus, target, lun, fmt, ...) \
+	printk(level IPR_NAME ": %d:%d:%d:%d: " fmt, (ioa_cfg)->host->host_no, \
+		bus, target, lun, ##__VA_ARGS__)
+
+#define ipr_res_err(ioa_cfg, res, fmt, ...) \
+	ipr_res_printk(KERN_ERR, ioa_cfg, (res)->bus, (res)->target, (res)->lun, fmt, ##__VA_ARGS__)
+
 #define ipr_ra_printk(level, ioa_cfg, ra, fmt, ...) \
 	printk(level IPR_NAME ": %d:%d:%d:%d: " fmt, (ioa_cfg)->host->host_no, \
 		(ra).bus, (ra).target, (ra).lun, ##__VA_ARGS__)
@@ -1384,9 +1645,6 @@ struct ipr_ucode_image_header {
 #define ipr_ra_err(ioa_cfg, ra, fmt, ...) \
 	ipr_ra_printk(KERN_ERR, ioa_cfg, ra, fmt, ##__VA_ARGS__)
 
-#define ipr_res_err(ioa_cfg, res, fmt, ...) \
-	ipr_ra_err(ioa_cfg, (res)->cfgte.res_addr, fmt, ##__VA_ARGS__)
-
 #define ipr_phys_res_err(ioa_cfg, res, fmt, ...)			\
 {									\
 	if ((res).bus >= IPR_MAX_NUM_BUSES) {				\
@@ -1399,14 +1657,21 @@ struct ipr_ucode_image_header {
 }
 
 #define ipr_hcam_err(hostrcb, fmt, ...)					\
-{													\
-	if (ipr_is_device(&(hostrcb)->hcam.u.error.failing_dev_res_addr)) {		\
-		ipr_ra_err((hostrcb)->ioa_cfg,							\
-				(hostrcb)->hcam.u.error.failing_dev_res_addr,			\
-				fmt, ##__VA_ARGS__);							\
-	} else {											\
-		dev_err(&(hostrcb)->ioa_cfg->pdev->dev, fmt, ##__VA_ARGS__);		\
-	}												\
+{									\
+	if (ipr_is_device(hostrcb)) {					\
+		if ((hostrcb)->ioa_cfg->sis64) {			\
+			printk(KERN_ERR IPR_NAME ": %s: " fmt, 		\
+				ipr_format_resource_path(&hostrcb->hcam.u.error64.fd_res_path[0], \
+					&hostrcb->rp_buffer[0]),	\
+				__VA_ARGS__);				\
+		} else {						\
+			ipr_ra_err((hostrcb)->ioa_cfg,			\
+				(hostrcb)->hcam.u.error.fd_res_addr,	\
+				fmt, __VA_ARGS__);			\
+		}							\
+	} else {							\
+		dev_err(&(hostrcb)->ioa_cfg->pdev->dev, fmt, __VA_ARGS__); \
+	}								\
 }
 
 #define ipr_trace ipr_dbg("%s: %s: Line: %d\n",\
@@ -1432,7 +1697,7 @@ ipr_err("----------------------------------------------------------\n")
  **/
 static inline int ipr_is_ioa_resource(struct ipr_resource_entry *res)
 {
-	return (res->cfgte.flags & IPR_IS_IOA_RESOURCE) ? 1 : 0;
+	return res->type == IPR_RES_TYPE_IOAFP;
 }
 
 /**
@@ -1444,12 +1709,8 @@ static inline int ipr_is_ioa_resource(struct ipr_resource_entry *res)
  **/
 static inline int ipr_is_af_dasd_device(struct ipr_resource_entry *res)
 {
-	if (IPR_IS_DASD_DEVICE(res->cfgte.std_inq_data) &&
-	    !ipr_is_ioa_resource(res) &&
-	    IPR_RES_SUBTYPE(res) == IPR_SUBTYPE_AF_DASD)
-		return 1;
-	else
-		return 0;
+	return res->type == IPR_RES_TYPE_AF_DASD ||
+		res->type == IPR_RES_TYPE_REMOTE_AF_DASD;
 }
 
 /**
@@ -1461,12 +1722,7 @@ static inline int ipr_is_af_dasd_device(struct ipr_resource_entry *res)
  **/
 static inline int ipr_is_vset_device(struct ipr_resource_entry *res)
 {
-	if (IPR_IS_DASD_DEVICE(res->cfgte.std_inq_data) &&
-	    !ipr_is_ioa_resource(res) &&
-	    IPR_RES_SUBTYPE(res) == IPR_SUBTYPE_VOLUME_SET)
-		return 1;
-	else
-		return 0;
+	return res->type == IPR_RES_TYPE_VOLUME_SET;
 }
 
 /**
@@ -1478,11 +1734,7 @@ static inline int ipr_is_vset_device(struct ipr_resource_entry *res)
  **/
 static inline int ipr_is_gscsi(struct ipr_resource_entry *res)
 {
-	if (!ipr_is_ioa_resource(res) &&
-	    IPR_RES_SUBTYPE(res) == IPR_SUBTYPE_GENERIC_SCSI)
-		return 1;
-	else
-		return 0;
+	return res->type == IPR_RES_TYPE_GENERIC_SCSI;
 }
 
 /**
@@ -1495,7 +1747,7 @@ static inline int ipr_is_gscsi(struct ipr_resource_entry *res)
 static inline int ipr_is_scsi_disk(struct ipr_resource_entry *res)
 {
 	if (ipr_is_af_dasd_device(res) ||
-	    (ipr_is_gscsi(res) && IPR_IS_DASD_DEVICE(res->cfgte.std_inq_data)))
+	    (ipr_is_gscsi(res) && IPR_IS_DASD_DEVICE(res->std_inq_data)))
 		return 1;
 	else
 		return 0;
@@ -1510,11 +1762,7 @@ static inline int ipr_is_scsi_disk(struct ipr_resource_entry *res)
  **/
 static inline int ipr_is_gata(struct ipr_resource_entry *res)
 {
-	if (!ipr_is_ioa_resource(res) &&
-	    IPR_RES_SUBTYPE(res) == IPR_SUBTYPE_GENERIC_ATA)
-		return 1;
-	else
-		return 0;
+	return res->type == IPR_RES_TYPE_GENERIC_ATA;
 }
 
 /**
@@ -1526,24 +1774,35 @@ static inline int ipr_is_gata(struct ipr_resource_entry *res)
  **/
 static inline int ipr_is_naca_model(struct ipr_resource_entry *res)
 {
-	if (ipr_is_gscsi(res) && IPR_QUEUEING_MODEL(res) == IPR_QUEUE_NACA_MODEL)
+	if (ipr_is_gscsi(res) && res->qmodel == IPR_QUEUE_NACA_MODEL)
 		return 1;
 	return 0;
 }
 
 /**
- * ipr_is_device - Determine if resource address is that of a device
- * @res_addr:	resource address struct
+ * ipr_is_device - Determine if the hostrcb structure is related to a device
+ * @hostrcb:	host resource control blocks struct
  *
  * Return value:
  * 	1 if AF / 0 if not AF
  **/
-static inline int ipr_is_device(struct ipr_res_addr *res_addr)
+static inline int ipr_is_device(struct ipr_hostrcb *hostrcb)
 {
-	if ((res_addr->bus < IPR_MAX_NUM_BUSES) &&
-	    (res_addr->target < (IPR_MAX_NUM_TARGETS_PER_BUS - 1)))
-		return 1;
-
+	struct ipr_res_addr *res_addr;
+	u8 *res_path;
+
+	if (hostrcb->ioa_cfg->sis64) {
+		res_path = &hostrcb->hcam.u.error64.fd_res_path[0];
+		if ((res_path[0] == 0x00 || res_path[0] == 0x80 ||
+		    res_path[0] == 0x81) && res_path[2] != 0xFF)
+			return 1;
+	} else {
+		res_addr = &hostrcb->hcam.u.error.fd_res_addr;
+
+		if ((res_addr->bus < IPR_MAX_NUM_BUSES) &&
+		    (res_addr->target < (IPR_MAX_NUM_TARGETS_PER_BUS - 1)))
+			return 1;
+	}
 	return 0;
 }
 
diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c
index 8a89ba900588..249053a9d4fa 100644
--- a/drivers/scsi/iscsi_tcp.c
+++ b/drivers/scsi/iscsi_tcp.c
@@ -874,7 +874,7 @@ static struct scsi_host_template iscsi_sw_tcp_sht = {
 	.cmd_per_lun		= ISCSI_DEF_CMD_PER_LUN,
 	.eh_abort_handler       = iscsi_eh_abort,
 	.eh_device_reset_handler= iscsi_eh_device_reset,
-	.eh_target_reset_handler= iscsi_eh_target_reset,
+	.eh_target_reset_handler = iscsi_eh_recover_target,
 	.use_clustering         = DISABLE_CLUSTERING,
 	.slave_alloc            = iscsi_sw_tcp_slave_alloc,
 	.slave_configure        = iscsi_sw_tcp_slave_configure,
diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c
index 6fde2fabfd9b..774e7ac837a5 100644
--- a/drivers/scsi/libfc/fc_fcp.c
+++ b/drivers/scsi/libfc/fc_fcp.c
@@ -48,7 +48,7 @@ struct kmem_cache *scsi_pkt_cachep;
 #define FC_SRB_CMD_SENT		(1 << 0)	/* cmd has been sent */
 #define FC_SRB_RCV_STATUS	(1 << 1)	/* response has arrived */
 #define FC_SRB_ABORT_PENDING	(1 << 2)	/* cmd abort sent to device */
-#define FC_SRB_ABORTED		(1 << 3)	/* abort acknowleged */
+#define FC_SRB_ABORTED		(1 << 3)	/* abort acknowledged */
 #define FC_SRB_DISCONTIG	(1 << 4)	/* non-sequential data recvd */
 #define FC_SRB_COMPL		(1 << 5)	/* fc_io_compl has been run */
 #define FC_SRB_FCP_PROCESSING_TMO (1 << 6)	/* timer function processing */
@@ -519,7 +519,7 @@ crc_err:
  *
  * Called after receiving a Transfer Ready data descriptor.
  * If the LLD is capable of sequence offload then send down the
- * seq_blen ammount of data in single frame, otherwise send
+ * seq_blen amount of data in single frame, otherwise send
  * multiple frames of the maximum frame payload supported by
  * the target port.
  */
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 703eb6a88790..685eaec53218 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -2338,7 +2338,7 @@ EXPORT_SYMBOL_GPL(iscsi_session_recovery_timedout);
  * This function will wait for a relogin, session termination from
  * userspace, or a recovery/replacement timeout.
  */
-static int iscsi_eh_session_reset(struct scsi_cmnd *sc)
+int iscsi_eh_session_reset(struct scsi_cmnd *sc)
 {
 	struct iscsi_cls_session *cls_session;
 	struct iscsi_session *session;
@@ -2389,6 +2389,7 @@ failed:
 	mutex_unlock(&session->eh_mutex);
 	return SUCCESS;
 }
+EXPORT_SYMBOL_GPL(iscsi_eh_session_reset);
 
 static void iscsi_prep_tgt_reset_pdu(struct scsi_cmnd *sc, struct iscsi_tm *hdr)
 {
@@ -2403,8 +2404,7 @@ static void iscsi_prep_tgt_reset_pdu(struct scsi_cmnd *sc, struct iscsi_tm *hdr)
  * iscsi_eh_target_reset - reset target
  * @sc: scsi command
  *
- * This will attempt to send a warm target reset. If that fails
- * then we will drop the session and attempt ERL0 recovery.
+ * This will attempt to send a warm target reset.
  */
 int iscsi_eh_target_reset(struct scsi_cmnd *sc)
 {
@@ -2476,12 +2476,27 @@ done:
 	ISCSI_DBG_EH(session, "tgt %s reset result = %s\n", session->targetname,
 		     rc == SUCCESS ? "SUCCESS" : "FAILED");
 	mutex_unlock(&session->eh_mutex);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(iscsi_eh_target_reset);
 
+/**
+ * iscsi_eh_recover_target - reset target and possibly the session
+ * @sc: scsi command
+ *
+ * This will attempt to send a warm target reset. If that fails,
+ * we will escalate to ERL0 session recovery.
+ */
+int iscsi_eh_recover_target(struct scsi_cmnd *sc)
+{
+	int rc;
+
+	rc = iscsi_eh_target_reset(sc);
 	if (rc == FAILED)
 		rc = iscsi_eh_session_reset(sc);
 	return rc;
 }
-EXPORT_SYMBOL_GPL(iscsi_eh_target_reset);
+EXPORT_SYMBOL_GPL(iscsi_eh_recover_target);
 
 /*
  * Pre-allocate a pool of @max items of @item_size. By default, the pool
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 84b696463a58..565e16dd74fc 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -37,6 +37,9 @@ struct lpfc_sli2_slim;
 					   the NameServer  before giving up. */
 #define LPFC_CMD_PER_LUN	3	/* max outstanding cmds per lun */
 #define LPFC_DEFAULT_SG_SEG_CNT 64	/* sg element count per scsi cmnd */
+#define LPFC_DEFAULT_MENLO_SG_SEG_CNT 128	/* sg element count per scsi
+		cmnd for menlo needs nearly twice as for firmware
+		downloads using bsg */
 #define LPFC_DEFAULT_PROT_SG_SEG_CNT 4096 /* sg protection elements count */
 #define LPFC_MAX_SG_SEG_CNT	4096	/* sg element count per scsi cmnd */
 #define LPFC_MAX_PROT_SG_SEG_CNT 4096	/* prot sg element count per scsi cmd*/
@@ -509,7 +512,6 @@ struct lpfc_hba {
 	int (*lpfc_hba_down_link)
 		(struct lpfc_hba *);
 
-
 	/* SLI4 specific HBA data structure */
 	struct lpfc_sli4_hba sli4_hba;
 
@@ -623,6 +625,9 @@ struct lpfc_hba {
 	uint32_t cfg_log_verbose;
 	uint32_t cfg_aer_support;
 	uint32_t cfg_suppress_link_up;
+#define LPFC_INITIALIZE_LINK              0	/* do normal init_link mbox */
+#define LPFC_DELAY_INIT_LINK              1	/* layered driver hold off */
+#define LPFC_DELAY_INIT_LINK_INDEFINITELY 2	/* wait, manual intervention */
 
 	lpfc_vpd_t vpd;		/* vital product data */
 
@@ -804,6 +809,9 @@ struct lpfc_hba {
 	struct list_head ct_ev_waiters;
 	struct unsol_rcv_ct_ctx ct_ctx[64];
 	uint32_t ctx_idx;
+
+	uint8_t menlo_flag;	/* menlo generic flags */
+#define HBA_MENLO_SUPPORT	0x1 /* HBA supports menlo commands */
 };
 
 static inline struct Scsi_Host *
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index c992e8328f9e..64cd17eedb64 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1939,7 +1939,9 @@ static DEVICE_ATTR(lpfc_enable_npiv, S_IRUGO,
 #            0x2  = never bring up link
 # Default value is 0.
 */
-LPFC_ATTR_R(suppress_link_up, 0, 0, 2, "Suppress Link Up at initialization");
+LPFC_ATTR_R(suppress_link_up, LPFC_INITIALIZE_LINK, LPFC_INITIALIZE_LINK,
+		LPFC_DELAY_INIT_LINK_INDEFINITELY,
+		"Suppress Link Up at initialization");
 
 /*
 # lpfc_nodev_tmo: If set, it will hold all I/O errors on devices that disappear
@@ -1966,8 +1968,7 @@ lpfc_nodev_tmo_show(struct device *dev, struct device_attribute *attr,
 {
 	struct Scsi_Host  *shost = class_to_shost(dev);
 	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
-	int val = 0;
-	val = vport->cfg_devloss_tmo;
+
 	return snprintf(buf, PAGE_SIZE, "%d\n",	vport->cfg_devloss_tmo);
 }
 
diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c
index f3f1bf1a0a71..692c29f6048e 100644
--- a/drivers/scsi/lpfc/lpfc_bsg.c
+++ b/drivers/scsi/lpfc/lpfc_bsg.c
@@ -83,15 +83,28 @@ struct lpfc_bsg_mbox {
 	struct fc_bsg_job *set_job;
 };
 
+#define MENLO_DID 0x0000FC0E
+
+struct lpfc_bsg_menlo {
+	struct lpfc_iocbq *cmdiocbq;
+	struct lpfc_iocbq *rspiocbq;
+	struct lpfc_dmabuf *bmp;
+
+	/* job waiting for this iocb to finish */
+	struct fc_bsg_job *set_job;
+};
+
 #define TYPE_EVT 	1
 #define TYPE_IOCB	2
 #define TYPE_MBOX	3
+#define TYPE_MENLO	4
 struct bsg_job_data {
 	uint32_t type;
 	union {
 		struct lpfc_bsg_event *evt;
 		struct lpfc_bsg_iocb iocb;
 		struct lpfc_bsg_mbox mbox;
+		struct lpfc_bsg_menlo menlo;
 	} context_un;
 };
 
@@ -2456,6 +2469,18 @@ static int lpfc_bsg_check_cmd_access(struct lpfc_hba *phba,
 	case MBX_PORT_IOV_CONTROL:
 		break;
 	case MBX_SET_VARIABLE:
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+			"1226 mbox: set_variable 0x%x, 0x%x\n",
+			mb->un.varWords[0],
+			mb->un.varWords[1]);
+		if ((mb->un.varWords[0] == SETVAR_MLOMNT)
+			&& (mb->un.varWords[1] == 1)) {
+			phba->wait_4_mlo_maint_flg = 1;
+		} else if (mb->un.varWords[0] == SETVAR_MLORST) {
+			phba->link_flag &= ~LS_LOOPBACK_MODE;
+			phba->fc_topology = TOPOLOGY_PT_PT;
+		}
+		break;
 	case MBX_RUN_BIU_DIAG64:
 	case MBX_READ_EVENT_LOG:
 	case MBX_READ_SPARM64:
@@ -2638,6 +2663,297 @@ job_error:
 }
 
 /**
+ * lpfc_bsg_menlo_cmd_cmp - lpfc_menlo_cmd completion handler
+ * @phba: Pointer to HBA context object.
+ * @cmdiocbq: Pointer to command iocb.
+ * @rspiocbq: Pointer to response iocb.
+ *
+ * This function is the completion handler for iocbs issued using
+ * lpfc_menlo_cmd function. This function is called by the
+ * ring event handler function without any lock held. This function
+ * can be called from both worker thread context and interrupt
+ * context. This function also can be called from another thread which
+ * cleans up the SLI layer objects.
+ * This function copies the contents of the response iocb to the
+ * response iocb memory object provided by the caller of
+ * lpfc_sli_issue_iocb_wait and then wakes up the thread which
+ * sleeps for the iocb completion.
+ **/
+static void
+lpfc_bsg_menlo_cmd_cmp(struct lpfc_hba *phba,
+			struct lpfc_iocbq *cmdiocbq,
+			struct lpfc_iocbq *rspiocbq)
+{
+	struct bsg_job_data *dd_data;
+	struct fc_bsg_job *job;
+	IOCB_t *rsp;
+	struct lpfc_dmabuf *bmp;
+	struct lpfc_bsg_menlo *menlo;
+	unsigned long flags;
+	struct menlo_response *menlo_resp;
+	int rc = 0;
+
+	spin_lock_irqsave(&phba->ct_ev_lock, flags);
+	dd_data = cmdiocbq->context1;
+	if (!dd_data) {
+		spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
+		return;
+	}
+
+	menlo = &dd_data->context_un.menlo;
+	job = menlo->set_job;
+	job->dd_data = NULL; /* so timeout handler does not reply */
+
+	spin_lock_irqsave(&phba->hbalock, flags);
+	cmdiocbq->iocb_flag |= LPFC_IO_WAKE;
+	if (cmdiocbq->context2 && rspiocbq)
+		memcpy(&((struct lpfc_iocbq *)cmdiocbq->context2)->iocb,
+		       &rspiocbq->iocb, sizeof(IOCB_t));
+	spin_unlock_irqrestore(&phba->hbalock, flags);
+
+	bmp = menlo->bmp;
+	rspiocbq = menlo->rspiocbq;
+	rsp = &rspiocbq->iocb;
+
+	pci_unmap_sg(phba->pcidev, job->request_payload.sg_list,
+		     job->request_payload.sg_cnt, DMA_TO_DEVICE);
+	pci_unmap_sg(phba->pcidev, job->reply_payload.sg_list,
+		     job->reply_payload.sg_cnt, DMA_FROM_DEVICE);
+
+	/* always return the xri, this would be used in the case
+	 * of a menlo download to allow the data to be sent as a continuation
+	 * of the exchange.
+	 */
+	menlo_resp = (struct menlo_response *)
+		job->reply->reply_data.vendor_reply.vendor_rsp;
+	menlo_resp->xri = rsp->ulpContext;
+	if (rsp->ulpStatus) {
+		if (rsp->ulpStatus == IOSTAT_LOCAL_REJECT) {
+			switch (rsp->un.ulpWord[4] & 0xff) {
+			case IOERR_SEQUENCE_TIMEOUT:
+				rc = -ETIMEDOUT;
+				break;
+			case IOERR_INVALID_RPI:
+				rc = -EFAULT;
+				break;
+			default:
+				rc = -EACCES;
+				break;
+			}
+		} else
+			rc = -EACCES;
+	} else
+		job->reply->reply_payload_rcv_len =
+			rsp->un.genreq64.bdl.bdeSize;
+
+	lpfc_mbuf_free(phba, bmp->virt, bmp->phys);
+	lpfc_sli_release_iocbq(phba, rspiocbq);
+	lpfc_sli_release_iocbq(phba, cmdiocbq);
+	kfree(bmp);
+	kfree(dd_data);
+	/* make error code available to userspace */
+	job->reply->result = rc;
+	/* complete the job back to userspace */
+	job->job_done(job);
+	spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
+	return;
+}
+
+/**
+ * lpfc_menlo_cmd - send an ioctl for menlo hardware
+ * @job: fc_bsg_job to handle
+ *
+ * This function issues a gen request 64 CR ioctl for all menlo cmd requests,
+ * all the command completions will return the xri for the command.
+ * For menlo data requests a gen request 64 CX is used to continue the exchange
+ * supplied in the menlo request header xri field.
+ **/
+static int
+lpfc_menlo_cmd(struct fc_bsg_job *job)
+{
+	struct lpfc_vport *vport = (struct lpfc_vport *)job->shost->hostdata;
+	struct lpfc_hba *phba = vport->phba;
+	struct lpfc_iocbq *cmdiocbq, *rspiocbq;
+	IOCB_t *cmd, *rsp;
+	int rc = 0;
+	struct menlo_command *menlo_cmd;
+	struct menlo_response *menlo_resp;
+	struct lpfc_dmabuf *bmp = NULL;
+	int request_nseg;
+	int reply_nseg;
+	struct scatterlist *sgel = NULL;
+	int numbde;
+	dma_addr_t busaddr;
+	struct bsg_job_data *dd_data;
+	struct ulp_bde64 *bpl = NULL;
+
+	/* in case no data is returned return just the return code */
+	job->reply->reply_payload_rcv_len = 0;
+
+	if (job->request_len <
+	    sizeof(struct fc_bsg_request) +
+		sizeof(struct menlo_command)) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC,
+				"2784 Received MENLO_CMD request below "
+				"minimum size\n");
+		rc = -ERANGE;
+		goto no_dd_data;
+	}
+
+	if (job->reply_len <
+	    sizeof(struct fc_bsg_request) + sizeof(struct menlo_response)) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC,
+				"2785 Received MENLO_CMD reply below "
+				"minimum size\n");
+		rc = -ERANGE;
+		goto no_dd_data;
+	}
+
+	if (!(phba->menlo_flag & HBA_MENLO_SUPPORT)) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC,
+				"2786 Adapter does not support menlo "
+				"commands\n");
+		rc = -EPERM;
+		goto no_dd_data;
+	}
+
+	menlo_cmd = (struct menlo_command *)
+		job->request->rqst_data.h_vendor.vendor_cmd;
+
+	menlo_resp = (struct menlo_response *)
+		job->reply->reply_data.vendor_reply.vendor_rsp;
+
+	/* allocate our bsg tracking structure */
+	dd_data = kmalloc(sizeof(struct bsg_job_data), GFP_KERNEL);
+	if (!dd_data) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC,
+				"2787 Failed allocation of dd_data\n");
+		rc = -ENOMEM;
+		goto no_dd_data;
+	}
+
+	bmp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+	if (!bmp) {
+		rc = -ENOMEM;
+		goto free_dd;
+	}
+
+	cmdiocbq = lpfc_sli_get_iocbq(phba);
+	if (!cmdiocbq) {
+		rc = -ENOMEM;
+		goto free_bmp;
+	}
+
+	rspiocbq = lpfc_sli_get_iocbq(phba);
+	if (!rspiocbq) {
+		rc = -ENOMEM;
+		goto free_cmdiocbq;
+	}
+
+	rsp = &rspiocbq->iocb;
+
+	bmp->virt = lpfc_mbuf_alloc(phba, 0, &bmp->phys);
+	if (!bmp->virt) {
+		rc = -ENOMEM;
+		goto free_rspiocbq;
+	}
+
+	INIT_LIST_HEAD(&bmp->list);
+	bpl = (struct ulp_bde64 *) bmp->virt;
+	request_nseg = pci_map_sg(phba->pcidev, job->request_payload.sg_list,
+				  job->request_payload.sg_cnt, DMA_TO_DEVICE);
+	for_each_sg(job->request_payload.sg_list, sgel, request_nseg, numbde) {
+		busaddr = sg_dma_address(sgel);
+		bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
+		bpl->tus.f.bdeSize = sg_dma_len(sgel);
+		bpl->tus.w = cpu_to_le32(bpl->tus.w);
+		bpl->addrLow = cpu_to_le32(putPaddrLow(busaddr));
+		bpl->addrHigh = cpu_to_le32(putPaddrHigh(busaddr));
+		bpl++;
+	}
+
+	reply_nseg = pci_map_sg(phba->pcidev, job->reply_payload.sg_list,
+				job->reply_payload.sg_cnt, DMA_FROM_DEVICE);
+	for_each_sg(job->reply_payload.sg_list, sgel, reply_nseg, numbde) {
+		busaddr = sg_dma_address(sgel);
+		bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64I;
+		bpl->tus.f.bdeSize = sg_dma_len(sgel);
+		bpl->tus.w = cpu_to_le32(bpl->tus.w);
+		bpl->addrLow = cpu_to_le32(putPaddrLow(busaddr));
+		bpl->addrHigh = cpu_to_le32(putPaddrHigh(busaddr));
+		bpl++;
+	}
+
+	cmd = &cmdiocbq->iocb;
+	cmd->un.genreq64.bdl.ulpIoTag32 = 0;
+	cmd->un.genreq64.bdl.addrHigh = putPaddrHigh(bmp->phys);
+	cmd->un.genreq64.bdl.addrLow = putPaddrLow(bmp->phys);
+	cmd->un.genreq64.bdl.bdeFlags = BUFF_TYPE_BLP_64;
+	cmd->un.genreq64.bdl.bdeSize =
+	    (request_nseg + reply_nseg) * sizeof(struct ulp_bde64);
+	cmd->un.genreq64.w5.hcsw.Fctl = (SI | LA);
+	cmd->un.genreq64.w5.hcsw.Dfctl = 0;
+	cmd->un.genreq64.w5.hcsw.Rctl = FC_RCTL_DD_UNSOL_CMD;
+	cmd->un.genreq64.w5.hcsw.Type = MENLO_TRANSPORT_TYPE; /* 0xfe */
+	cmd->ulpBdeCount = 1;
+	cmd->ulpClass = CLASS3;
+	cmd->ulpOwner = OWN_CHIP;
+	cmd->ulpLe = 1; /* Limited Edition */
+	cmdiocbq->iocb_flag |= LPFC_IO_LIBDFC;
+	cmdiocbq->vport = phba->pport;
+	/* We want the firmware to timeout before we do */
+	cmd->ulpTimeout = MENLO_TIMEOUT - 5;
+	cmdiocbq->context3 = bmp;
+	cmdiocbq->context2 = rspiocbq;
+	cmdiocbq->iocb_cmpl = lpfc_bsg_menlo_cmd_cmp;
+	cmdiocbq->context1 = dd_data;
+	cmdiocbq->context2 = rspiocbq;
+	if (menlo_cmd->cmd == LPFC_BSG_VENDOR_MENLO_CMD) {
+		cmd->ulpCommand = CMD_GEN_REQUEST64_CR;
+		cmd->ulpPU = MENLO_PU; /* 3 */
+		cmd->un.ulpWord[4] = MENLO_DID; /* 0x0000FC0E */
+		cmd->ulpContext = MENLO_CONTEXT; /* 0 */
+	} else {
+		cmd->ulpCommand = CMD_GEN_REQUEST64_CX;
+		cmd->ulpPU = 1;
+		cmd->un.ulpWord[4] = 0;
+		cmd->ulpContext = menlo_cmd->xri;
+	}
+
+	dd_data->type = TYPE_MENLO;
+	dd_data->context_un.menlo.cmdiocbq = cmdiocbq;
+	dd_data->context_un.menlo.rspiocbq = rspiocbq;
+	dd_data->context_un.menlo.set_job = job;
+	dd_data->context_un.menlo.bmp = bmp;
+
+	rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, cmdiocbq,
+		MENLO_TIMEOUT - 5);
+	if (rc == IOCB_SUCCESS)
+		return 0; /* done for now */
+
+	/* iocb failed so cleanup */
+	pci_unmap_sg(phba->pcidev, job->request_payload.sg_list,
+		     job->request_payload.sg_cnt, DMA_TO_DEVICE);
+	pci_unmap_sg(phba->pcidev, job->reply_payload.sg_list,
+		     job->reply_payload.sg_cnt, DMA_FROM_DEVICE);
+
+	lpfc_mbuf_free(phba, bmp->virt, bmp->phys);
+
+free_rspiocbq:
+	lpfc_sli_release_iocbq(phba, rspiocbq);
+free_cmdiocbq:
+	lpfc_sli_release_iocbq(phba, cmdiocbq);
+free_bmp:
+	kfree(bmp);
+free_dd:
+	kfree(dd_data);
+no_dd_data:
+	/* make error code available to userspace */
+	job->reply->result = rc;
+	job->dd_data = NULL;
+	return rc;
+}
+/**
  * lpfc_bsg_hst_vendor - process a vendor-specific fc_bsg_job
  * @job: fc_bsg_job to handle
  **/
@@ -2669,6 +2985,10 @@ lpfc_bsg_hst_vendor(struct fc_bsg_job *job)
 	case LPFC_BSG_VENDOR_MBOX:
 		rc = lpfc_bsg_mbox_cmd(job);
 		break;
+	case LPFC_BSG_VENDOR_MENLO_CMD:
+	case LPFC_BSG_VENDOR_MENLO_DATA:
+		rc = lpfc_menlo_cmd(job);
+		break;
 	default:
 		rc = -EINVAL;
 		job->reply->reply_payload_rcv_len = 0;
@@ -2728,6 +3048,7 @@ lpfc_bsg_timeout(struct fc_bsg_job *job)
 	struct lpfc_bsg_event *evt;
 	struct lpfc_bsg_iocb *iocb;
 	struct lpfc_bsg_mbox *mbox;
+	struct lpfc_bsg_menlo *menlo;
 	struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING];
 	struct bsg_job_data *dd_data;
 	unsigned long flags;
@@ -2775,6 +3096,17 @@ lpfc_bsg_timeout(struct fc_bsg_job *job)
 		spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
 		job->job_done(job);
 		break;
+	case TYPE_MENLO:
+		menlo = &dd_data->context_un.menlo;
+		cmdiocb = menlo->cmdiocbq;
+		/* hint to completion handler that the job timed out */
+		job->reply->result = -EAGAIN;
+		spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
+		/* this will call our completion handler */
+		spin_lock_irq(&phba->hbalock);
+		lpfc_sli_issue_abort_iotag(phba, pring, cmdiocb);
+		spin_unlock_irq(&phba->hbalock);
+		break;
 	default:
 		spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
 		break;
diff --git a/drivers/scsi/lpfc/lpfc_bsg.h b/drivers/scsi/lpfc/lpfc_bsg.h
index 6c8f87e39b98..5bc630819b9e 100644
--- a/drivers/scsi/lpfc/lpfc_bsg.h
+++ b/drivers/scsi/lpfc/lpfc_bsg.h
@@ -31,6 +31,8 @@
 #define LPFC_BSG_VENDOR_DIAG_TEST	5
 #define LPFC_BSG_VENDOR_GET_MGMT_REV	6
 #define LPFC_BSG_VENDOR_MBOX		7
+#define LPFC_BSG_VENDOR_MENLO_CMD	8
+#define LPFC_BSG_VENDOR_MENLO_DATA	9
 
 struct set_ct_event {
 	uint32_t command;
@@ -96,3 +98,13 @@ struct dfc_mbox_req {
 	uint8_t mbOffset;
 };
 
+/* Used for menlo command or menlo data. The xri is only used for menlo data */
+struct menlo_command {
+	uint32_t cmd;
+	uint32_t xri;
+};
+
+struct menlo_response {
+	uint32_t xri; /* return the xri of the iocb exchange */
+};
+
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index 6f0fb51eb461..5087c4211b43 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -63,6 +63,7 @@ void lpfc_linkdown_port(struct lpfc_vport *);
 void lpfc_port_link_failure(struct lpfc_vport *);
 void lpfc_mbx_cmpl_read_la(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_init_vpi_cmpl(struct lpfc_hba *, LPFC_MBOXQ_t *);
+void lpfc_cancel_all_vport_retry_delay_timer(struct lpfc_hba *);
 void lpfc_retry_pport_discovery(struct lpfc_hba *);
 
 void lpfc_mbx_cmpl_reg_login(struct lpfc_hba *, LPFC_MBOXQ_t *);
@@ -221,6 +222,10 @@ void lpfc_unregister_fcf_rescan(struct lpfc_hba *);
 void lpfc_unregister_unused_fcf(struct lpfc_hba *);
 int lpfc_sli4_redisc_fcf_table(struct lpfc_hba *);
 void lpfc_fcf_redisc_wait_start_timer(struct lpfc_hba *);
+void lpfc_sli4_fcf_dead_failthrough(struct lpfc_hba *);
+uint16_t lpfc_sli4_fcf_rr_next_index_get(struct lpfc_hba *);
+int lpfc_sli4_fcf_rr_index_set(struct lpfc_hba *, uint16_t);
+void lpfc_sli4_fcf_rr_index_clear(struct lpfc_hba *, uint16_t);
 
 int lpfc_mem_alloc(struct lpfc_hba *, int align);
 void lpfc_mem_free(struct lpfc_hba *);
@@ -385,7 +390,7 @@ void lpfc_parse_fcoe_conf(struct lpfc_hba *, uint8_t *, uint32_t);
 int lpfc_parse_vpd(struct lpfc_hba *, uint8_t *, int);
 void lpfc_start_fdiscs(struct lpfc_hba *phba);
 struct lpfc_vport *lpfc_find_vport_by_vpid(struct lpfc_hba *, uint16_t);
-
+struct lpfc_sglq *__lpfc_get_active_sglq(struct lpfc_hba *, uint16_t);
 #define ScsiResult(host_code, scsi_code) (((host_code) << 16) | scsi_code)
 #define HBA_EVENT_RSCN                   5
 #define HBA_EVENT_LINK_UP                2
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 08b6634cb994..ee980bd66869 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -771,6 +771,7 @@ lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 	struct lpfc_nodelist *ndlp = cmdiocb->context1;
 	struct lpfc_dmabuf *pcmd = cmdiocb->context2, *prsp;
 	struct serv_parm *sp;
+	uint16_t fcf_index;
 	int rc;
 
 	/* Check to see if link went down during discovery */
@@ -788,6 +789,54 @@ lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 		vport->port_state);
 
 	if (irsp->ulpStatus) {
+		/*
+		 * In case of FIP mode, perform round robin FCF failover
+		 * due to new FCF discovery
+		 */
+		if ((phba->hba_flag & HBA_FIP_SUPPORT) &&
+		    (phba->fcf.fcf_flag & FCF_DISCOVERY)) {
+			lpfc_printf_log(phba, KERN_WARNING, LOG_FIP | LOG_ELS,
+					"2611 FLOGI failed on registered "
+					"FCF record fcf_index:%d, trying "
+					"to perform round robin failover\n",
+					phba->fcf.current_rec.fcf_indx);
+			fcf_index = lpfc_sli4_fcf_rr_next_index_get(phba);
+			if (fcf_index == LPFC_FCOE_FCF_NEXT_NONE) {
+				/*
+				 * Exhausted the eligible FCF record list,
+				 * fail through to retry FLOGI on current
+				 * FCF record.
+				 */
+				lpfc_printf_log(phba, KERN_WARNING,
+						LOG_FIP | LOG_ELS,
+						"2760 FLOGI exhausted FCF "
+						"round robin failover list, "
+						"retry FLOGI on the current "
+						"registered FCF index:%d\n",
+						phba->fcf.current_rec.fcf_indx);
+				spin_lock_irq(&phba->hbalock);
+				phba->fcf.fcf_flag &= ~FCF_DISCOVERY;
+				spin_unlock_irq(&phba->hbalock);
+			} else {
+				rc = lpfc_sli4_fcf_rr_read_fcf_rec(phba,
+								   fcf_index);
+				if (rc) {
+					lpfc_printf_log(phba, KERN_WARNING,
+							LOG_FIP | LOG_ELS,
+							"2761 FLOGI round "
+							"robin FCF failover "
+							"read FCF failed "
+							"rc:x%x, fcf_index:"
+							"%d\n", rc,
+						phba->fcf.current_rec.fcf_indx);
+					spin_lock_irq(&phba->hbalock);
+					phba->fcf.fcf_flag &= ~FCF_DISCOVERY;
+					spin_unlock_irq(&phba->hbalock);
+				} else
+					goto out;
+			}
+		}
+
 		/* Check for retry */
 		if (lpfc_els_retry(phba, cmdiocb, rspiocb))
 			goto out;
@@ -806,9 +855,8 @@ lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 		}
 
 		/* FLOGI failure */
-		lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
-				 "0100 FLOGI failure Data: x%x x%x "
-				 "x%x\n",
+		lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
+				 "0100 FLOGI failure Status:x%x/x%x TMO:x%x\n",
 				 irsp->ulpStatus, irsp->un.ulpWord[4],
 				 irsp->ulpTimeout);
 		goto flogifail;
@@ -842,8 +890,18 @@ lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 		else
 			rc = lpfc_cmpl_els_flogi_nport(vport, ndlp, sp);
 
-		if (!rc)
+		if (!rc) {
+			/* Mark the FCF discovery process done */
+			lpfc_printf_vlog(vport, KERN_INFO, LOG_FIP | LOG_ELS,
+					 "2769 FLOGI successful on FCF record: "
+					 "current_fcf_index:x%x, terminate FCF "
+					 "round robin failover process\n",
+					 phba->fcf.current_rec.fcf_indx);
+			spin_lock_irq(&phba->hbalock);
+			phba->fcf.fcf_flag &= ~FCF_DISCOVERY;
+			spin_unlock_irq(&phba->hbalock);
 			goto out;
+		}
 	}
 
 flogifail:
@@ -981,7 +1039,7 @@ lpfc_issue_els_flogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
  * function returns, it does not guarantee all the IOCBs are actually aborted.
  *
  * Return code
- *   0 - Sucessfully issued abort iocb on all outstanding flogis (Always 0)
+ *   0 - Successfully issued abort iocb on all outstanding flogis (Always 0)
  **/
 int
 lpfc_els_abort_flogi(struct lpfc_hba *phba)
@@ -1409,6 +1467,10 @@ lpfc_cmpl_els_plogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 			goto out;
 		}
 		/* PLOGI failed */
+		lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
+				 "2753 PLOGI failure DID:%06X Status:x%x/x%x\n",
+				 ndlp->nlp_DID, irsp->ulpStatus,
+				 irsp->un.ulpWord[4]);
 		/* Do not call DSM for lpfc_els_abort'ed ELS cmds */
 		if (lpfc_error_lost_link(irsp))
 			rc = NLP_STE_FREED_NODE;
@@ -1577,6 +1639,10 @@ lpfc_cmpl_els_prli(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 			goto out;
 		}
 		/* PRLI failed */
+		lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
+				 "2754 PRLI failure DID:%06X Status:x%x/x%x\n",
+				 ndlp->nlp_DID, irsp->ulpStatus,
+				 irsp->un.ulpWord[4]);
 		/* Do not call DSM for lpfc_els_abort'ed ELS cmds */
 		if (lpfc_error_lost_link(irsp))
 			goto out;
@@ -1860,6 +1926,10 @@ lpfc_cmpl_els_adisc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 			goto out;
 		}
 		/* ADISC failed */
+		lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
+				 "2755 ADISC failure DID:%06X Status:x%x/x%x\n",
+				 ndlp->nlp_DID, irsp->ulpStatus,
+				 irsp->un.ulpWord[4]);
 		/* Do not call DSM for lpfc_els_abort'ed ELS cmds */
 		if (!lpfc_error_lost_link(irsp))
 			lpfc_disc_state_machine(vport, ndlp, cmdiocb,
@@ -2009,6 +2079,10 @@ lpfc_cmpl_els_logo(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 			/* ELS command is being retried */
 			goto out;
 		/* LOGO failed */
+		lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
+				 "2756 LOGO failure DID:%06X Status:x%x/x%x\n",
+				 ndlp->nlp_DID, irsp->ulpStatus,
+				 irsp->un.ulpWord[4]);
 		/* Do not call DSM for lpfc_els_abort'ed ELS cmds */
 		if (lpfc_error_lost_link(irsp))
 			goto out;
@@ -3129,7 +3203,7 @@ lpfc_cmpl_els_rsp(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 	if (ndlp && NLP_CHK_NODE_ACT(ndlp) &&
 	    (*((uint32_t *) (pcmd)) == ELS_CMD_LS_RJT)) {
 		/* A LS_RJT associated with Default RPI cleanup has its own
-		 * seperate code path.
+		 * separate code path.
 		 */
 		if (!(ndlp->nlp_flag & NLP_RM_DFLT_RPI))
 			ls_rjt = 1;
@@ -5989,7 +6063,12 @@ lpfc_cmpl_reg_new_vport(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 			if (phba->sli_rev < LPFC_SLI_REV4)
 				lpfc_issue_fabric_reglogin(vport);
 			else {
-				lpfc_start_fdiscs(phba);
+				/*
+				 * If the physical port is instantiated using
+				 * FDISC, do not start vport discovery.
+				 */
+				if (vport->port_state != LPFC_FDISC)
+					lpfc_start_fdiscs(phba);
 				lpfc_do_scr_ns_plogi(phba, vport);
 			}
 		} else
@@ -6055,21 +6134,18 @@ mbox_err_exit:
 }
 
 /**
- * lpfc_retry_pport_discovery - Start timer to retry FLOGI.
+ * lpfc_cancel_all_vport_retry_delay_timer - Cancel all vport retry delay timer
  * @phba: pointer to lpfc hba data structure.
  *
- * This routine abort all pending discovery commands and
- * start a timer to retry FLOGI for the physical port
- * discovery.
+ * This routine cancels the retry delay timers to all the vports.
  **/
 void
-lpfc_retry_pport_discovery(struct lpfc_hba *phba)
+lpfc_cancel_all_vport_retry_delay_timer(struct lpfc_hba *phba)
 {
 	struct lpfc_vport **vports;
 	struct lpfc_nodelist *ndlp;
-	struct Scsi_Host  *shost;
-	int i;
 	uint32_t link_state;
+	int i;
 
 	/* Treat this failure as linkdown for all vports */
 	link_state = phba->link_state;
@@ -6087,13 +6163,30 @@ lpfc_retry_pport_discovery(struct lpfc_hba *phba)
 		}
 		lpfc_destroy_vport_work_array(phba, vports);
 	}
+}
+
+/**
+ * lpfc_retry_pport_discovery - Start timer to retry FLOGI.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine abort all pending discovery commands and
+ * start a timer to retry FLOGI for the physical port
+ * discovery.
+ **/
+void
+lpfc_retry_pport_discovery(struct lpfc_hba *phba)
+{
+	struct lpfc_nodelist *ndlp;
+	struct Scsi_Host  *shost;
+
+	/* Cancel the all vports retry delay retry timers */
+	lpfc_cancel_all_vport_retry_delay_timer(phba);
 
 	/* If fabric require FLOGI, then re-instantiate physical login */
 	ndlp = lpfc_findnode_did(phba->pport, Fabric_DID);
 	if (!ndlp)
 		return;
 
-
 	shost = lpfc_shost_from_vport(phba->pport);
 	mod_timer(&ndlp->nlp_delayfunc, jiffies + HZ);
 	spin_lock_irq(shost->host_lock);
@@ -6219,7 +6312,8 @@ lpfc_cmpl_els_fdisc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 		lpfc_mbx_unreg_vpi(vport);
 		spin_lock_irq(shost->host_lock);
 		vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
-		vport->fc_flag |= FC_VPORT_NEEDS_INIT_VPI;
+		if (phba->sli_rev == LPFC_SLI_REV4)
+			vport->fc_flag |= FC_VPORT_NEEDS_INIT_VPI;
 		spin_unlock_irq(shost->host_lock);
 	}
 
@@ -6797,21 +6891,27 @@ lpfc_sli4_els_xri_aborted(struct lpfc_hba *phba,
 	struct lpfc_sglq *sglq_entry = NULL, *sglq_next = NULL;
 	unsigned long iflag = 0;
 
-	spin_lock_irqsave(&phba->sli4_hba.abts_sgl_list_lock, iflag);
+	spin_lock_irqsave(&phba->hbalock, iflag);
+	spin_lock(&phba->sli4_hba.abts_sgl_list_lock);
 	list_for_each_entry_safe(sglq_entry, sglq_next,
 			&phba->sli4_hba.lpfc_abts_els_sgl_list, list) {
 		if (sglq_entry->sli4_xritag == xri) {
 			list_del(&sglq_entry->list);
-			spin_unlock_irqrestore(
-					&phba->sli4_hba.abts_sgl_list_lock,
-					 iflag);
-			spin_lock_irqsave(&phba->hbalock, iflag);
-
 			list_add_tail(&sglq_entry->list,
 				&phba->sli4_hba.lpfc_sgl_list);
+			sglq_entry->state = SGL_FREED;
+			spin_unlock(&phba->sli4_hba.abts_sgl_list_lock);
 			spin_unlock_irqrestore(&phba->hbalock, iflag);
 			return;
 		}
 	}
-	spin_unlock_irqrestore(&phba->sli4_hba.abts_sgl_list_lock, iflag);
+	spin_unlock(&phba->sli4_hba.abts_sgl_list_lock);
+	sglq_entry = __lpfc_get_active_sglq(phba, xri);
+	if (!sglq_entry || (sglq_entry->sli4_xritag != xri)) {
+		spin_unlock_irqrestore(&phba->hbalock, iflag);
+		return;
+	}
+	sglq_entry->state = SGL_XRI_ABORTED;
+	spin_unlock_irqrestore(&phba->hbalock, iflag);
+	return;
 }
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 2359d0bfb734..c555e3b7f202 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -1481,8 +1481,6 @@ lpfc_match_fcf_conn_list(struct lpfc_hba *phba,
 int
 lpfc_check_pending_fcoe_event(struct lpfc_hba *phba, uint8_t unreg_fcf)
 {
-	LPFC_MBOXQ_t *mbox;
-	int rc;
 	/*
 	 * If the Link is up and no FCoE events while in the
 	 * FCF discovery, no need to restart FCF discovery.
@@ -1491,86 +1489,70 @@ lpfc_check_pending_fcoe_event(struct lpfc_hba *phba, uint8_t unreg_fcf)
 		(phba->fcoe_eventtag == phba->fcoe_eventtag_at_fcf_scan))
 		return 0;
 
+	lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
+			"2768 Pending link or FCF event during current "
+			"handling of the previous event: link_state:x%x, "
+			"evt_tag_at_scan:x%x, evt_tag_current:x%x\n",
+			phba->link_state, phba->fcoe_eventtag_at_fcf_scan,
+			phba->fcoe_eventtag);
+
 	spin_lock_irq(&phba->hbalock);
 	phba->fcf.fcf_flag &= ~FCF_AVAILABLE;
 	spin_unlock_irq(&phba->hbalock);
 
-	if (phba->link_state >= LPFC_LINK_UP)
-		lpfc_sli4_read_fcf_record(phba, LPFC_FCOE_FCF_GET_FIRST);
-	else {
+	if (phba->link_state >= LPFC_LINK_UP) {
+		lpfc_printf_log(phba, KERN_INFO, LOG_FIP | LOG_DISCOVERY,
+				"2780 Restart FCF table scan due to "
+				"pending FCF event:evt_tag_at_scan:x%x, "
+				"evt_tag_current:x%x\n",
+				phba->fcoe_eventtag_at_fcf_scan,
+				phba->fcoe_eventtag);
+		lpfc_sli4_fcf_scan_read_fcf_rec(phba, LPFC_FCOE_FCF_GET_FIRST);
+	} else {
 		/*
 		 * Do not continue FCF discovery and clear FCF_DISC_INPROGRESS
 		 * flag
 		 */
 		spin_lock_irq(&phba->hbalock);
 		phba->hba_flag &= ~FCF_DISC_INPROGRESS;
-		phba->fcf.fcf_flag &= ~FCF_REDISC_FOV;
+		phba->fcf.fcf_flag &= ~(FCF_REDISC_FOV | FCF_DISCOVERY);
 		spin_unlock_irq(&phba->hbalock);
 	}
 
+	/* Unregister the currently registered FCF if required */
 	if (unreg_fcf) {
 		spin_lock_irq(&phba->hbalock);
 		phba->fcf.fcf_flag &= ~FCF_REGISTERED;
 		spin_unlock_irq(&phba->hbalock);
-		mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
-		if (!mbox) {
-			lpfc_printf_log(phba, KERN_ERR,
-				LOG_DISCOVERY|LOG_MBOX,
-				"2610 UNREG_FCFI mbox allocation failed\n");
-			return 1;
-		}
-		lpfc_unreg_fcfi(mbox, phba->fcf.fcfi);
-		mbox->vport = phba->pport;
-		mbox->mbox_cmpl = lpfc_unregister_fcfi_cmpl;
-		rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
-		if (rc == MBX_NOT_FINISHED) {
-			lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
-				"2611 UNREG_FCFI issue mbox failed\n");
-			mempool_free(mbox, phba->mbox_mem_pool);
-		}
+		lpfc_sli4_unregister_fcf(phba);
 	}
-
 	return 1;
 }
 
 /**
- * lpfc_mbx_cmpl_read_fcf_record - Completion handler for read_fcf mbox.
+ * lpfc_sli4_fcf_rec_mbox_parse - parse non-embedded fcf record mailbox command
  * @phba: pointer to lpfc hba data structure.
  * @mboxq: pointer to mailbox object.
+ * @next_fcf_index: pointer to holder of next fcf index.
  *
- * This function iterate through all the fcf records available in
- * HBA and choose the optimal FCF record for discovery. After finding
- * the FCF for discovery it register the FCF record and kick start
- * discovery.
- * If FCF_IN_USE flag is set in currently used FCF, the routine try to
- * use a FCF record which match fabric name and mac address of the
- * currently used FCF record.
- * If the driver support only one FCF, it will try to use the FCF record
- * used by BOOT_BIOS.
+ * This routine parses the non-embedded fcf mailbox command by performing the
+ * necessarily error checking, non-embedded read FCF record mailbox command
+ * SGE parsing, and endianness swapping.
+ *
+ * Returns the pointer to the new FCF record in the non-embedded mailbox
+ * command DMA memory if successfully, other NULL.
  */
-void
-lpfc_mbx_cmpl_read_fcf_record(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+static struct fcf_record *
+lpfc_sli4_fcf_rec_mbox_parse(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq,
+			     uint16_t *next_fcf_index)
 {
 	void *virt_addr;
 	dma_addr_t phys_addr;
-	uint8_t *bytep;
 	struct lpfc_mbx_sge sge;
 	struct lpfc_mbx_read_fcf_tbl *read_fcf;
 	uint32_t shdr_status, shdr_add_status;
 	union lpfc_sli4_cfg_shdr *shdr;
 	struct fcf_record *new_fcf_record;
-	uint32_t boot_flag, addr_mode;
-	uint32_t next_fcf_index;
-	struct lpfc_fcf_rec *fcf_rec = NULL;
-	unsigned long iflags;
-	uint16_t vlan_id;
-	int rc;
-
-	/* If there is pending FCoE event restart FCF table scan */
-	if (lpfc_check_pending_fcoe_event(phba, 0)) {
-		lpfc_sli4_mbox_cmd_free(phba, mboxq);
-		return;
-	}
 
 	/* Get the first SGE entry from the non-embedded DMA memory. This
 	 * routine only uses a single SGE.
@@ -1581,59 +1563,183 @@ lpfc_mbx_cmpl_read_fcf_record(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
 		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
 				"2524 Failed to get the non-embedded SGE "
 				"virtual address\n");
-		goto out;
+		return NULL;
 	}
 	virt_addr = mboxq->sge_array->addr[0];
 
 	shdr = (union lpfc_sli4_cfg_shdr *)virt_addr;
 	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
-	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
-				 &shdr->response);
-	/*
-	 * The FCF Record was read and there is no reason for the driver
-	 * to maintain the FCF record data or memory. Instead, just need
-	 * to book keeping the FCFIs can be used.
-	 */
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
 	if (shdr_status || shdr_add_status) {
-		if (shdr_status == STATUS_FCF_TABLE_EMPTY) {
-			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+		if (shdr_status == STATUS_FCF_TABLE_EMPTY)
+			lpfc_printf_log(phba, KERN_ERR, LOG_FIP,
 					"2726 READ_FCF_RECORD Indicates empty "
 					"FCF table.\n");
-		} else {
-			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+		else
+			lpfc_printf_log(phba, KERN_ERR, LOG_FIP,
 					"2521 READ_FCF_RECORD mailbox failed "
-					"with status x%x add_status x%x, mbx\n",
-					shdr_status, shdr_add_status);
-		}
-		goto out;
+					"with status x%x add_status x%x, "
+					"mbx\n", shdr_status, shdr_add_status);
+		return NULL;
 	}
-	/* Interpreting the returned information of FCF records */
+
+	/* Interpreting the returned information of the FCF record */
 	read_fcf = (struct lpfc_mbx_read_fcf_tbl *)virt_addr;
 	lpfc_sli_pcimem_bcopy(read_fcf, read_fcf,
 			      sizeof(struct lpfc_mbx_read_fcf_tbl));
-	next_fcf_index = bf_get(lpfc_mbx_read_fcf_tbl_nxt_vindx, read_fcf);
-
+	*next_fcf_index = bf_get(lpfc_mbx_read_fcf_tbl_nxt_vindx, read_fcf);
 	new_fcf_record = (struct fcf_record *)(virt_addr +
 			  sizeof(struct lpfc_mbx_read_fcf_tbl));
 	lpfc_sli_pcimem_bcopy(new_fcf_record, new_fcf_record,
 			      sizeof(struct fcf_record));
-	bytep = virt_addr + sizeof(union lpfc_sli4_cfg_shdr);
 
+	return new_fcf_record;
+}
+
+/**
+ * lpfc_sli4_log_fcf_record_info - Log the information of a fcf record
+ * @phba: pointer to lpfc hba data structure.
+ * @fcf_record: pointer to the fcf record.
+ * @vlan_id: the lowest vlan identifier associated to this fcf record.
+ * @next_fcf_index: the index to the next fcf record in hba's fcf table.
+ *
+ * This routine logs the detailed FCF record if the LOG_FIP loggin is
+ * enabled.
+ **/
+static void
+lpfc_sli4_log_fcf_record_info(struct lpfc_hba *phba,
+			      struct fcf_record *fcf_record,
+			      uint16_t vlan_id,
+			      uint16_t next_fcf_index)
+{
+	lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
+			"2764 READ_FCF_RECORD:\n"
+			"\tFCF_Index     : x%x\n"
+			"\tFCF_Avail     : x%x\n"
+			"\tFCF_Valid     : x%x\n"
+			"\tFIP_Priority  : x%x\n"
+			"\tMAC_Provider  : x%x\n"
+			"\tLowest VLANID : x%x\n"
+			"\tFCF_MAC Addr  : x%x:%x:%x:%x:%x:%x\n"
+			"\tFabric_Name   : x%x:%x:%x:%x:%x:%x:%x:%x\n"
+			"\tSwitch_Name   : x%x:%x:%x:%x:%x:%x:%x:%x\n"
+			"\tNext_FCF_Index: x%x\n",
+			bf_get(lpfc_fcf_record_fcf_index, fcf_record),
+			bf_get(lpfc_fcf_record_fcf_avail, fcf_record),
+			bf_get(lpfc_fcf_record_fcf_valid, fcf_record),
+			fcf_record->fip_priority,
+			bf_get(lpfc_fcf_record_mac_addr_prov, fcf_record),
+			vlan_id,
+			bf_get(lpfc_fcf_record_mac_0, fcf_record),
+			bf_get(lpfc_fcf_record_mac_1, fcf_record),
+			bf_get(lpfc_fcf_record_mac_2, fcf_record),
+			bf_get(lpfc_fcf_record_mac_3, fcf_record),
+			bf_get(lpfc_fcf_record_mac_4, fcf_record),
+			bf_get(lpfc_fcf_record_mac_5, fcf_record),
+			bf_get(lpfc_fcf_record_fab_name_0, fcf_record),
+			bf_get(lpfc_fcf_record_fab_name_1, fcf_record),
+			bf_get(lpfc_fcf_record_fab_name_2, fcf_record),
+			bf_get(lpfc_fcf_record_fab_name_3, fcf_record),
+			bf_get(lpfc_fcf_record_fab_name_4, fcf_record),
+			bf_get(lpfc_fcf_record_fab_name_5, fcf_record),
+			bf_get(lpfc_fcf_record_fab_name_6, fcf_record),
+			bf_get(lpfc_fcf_record_fab_name_7, fcf_record),
+			bf_get(lpfc_fcf_record_switch_name_0, fcf_record),
+			bf_get(lpfc_fcf_record_switch_name_1, fcf_record),
+			bf_get(lpfc_fcf_record_switch_name_2, fcf_record),
+			bf_get(lpfc_fcf_record_switch_name_3, fcf_record),
+			bf_get(lpfc_fcf_record_switch_name_4, fcf_record),
+			bf_get(lpfc_fcf_record_switch_name_5, fcf_record),
+			bf_get(lpfc_fcf_record_switch_name_6, fcf_record),
+			bf_get(lpfc_fcf_record_switch_name_7, fcf_record),
+			next_fcf_index);
+}
+
+/**
+ * lpfc_mbx_cmpl_fcf_scan_read_fcf_rec - fcf scan read_fcf mbox cmpl handler.
+ * @phba: pointer to lpfc hba data structure.
+ * @mboxq: pointer to mailbox object.
+ *
+ * This function iterates through all the fcf records available in
+ * HBA and chooses the optimal FCF record for discovery. After finding
+ * the FCF for discovery it registers the FCF record and kicks start
+ * discovery.
+ * If FCF_IN_USE flag is set in currently used FCF, the routine tries to
+ * use an FCF record which matches fabric name and mac address of the
+ * currently used FCF record.
+ * If the driver supports only one FCF, it will try to use the FCF record
+ * used by BOOT_BIOS.
+ */
+void
+lpfc_mbx_cmpl_fcf_scan_read_fcf_rec(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+	struct fcf_record *new_fcf_record;
+	uint32_t boot_flag, addr_mode;
+	uint16_t fcf_index, next_fcf_index;
+	struct lpfc_fcf_rec *fcf_rec = NULL;
+	uint16_t vlan_id;
+	int rc;
+
+	/* If there is pending FCoE event restart FCF table scan */
+	if (lpfc_check_pending_fcoe_event(phba, 0)) {
+		lpfc_sli4_mbox_cmd_free(phba, mboxq);
+		return;
+	}
+
+	/* Parse the FCF record from the non-embedded mailbox command */
+	new_fcf_record = lpfc_sli4_fcf_rec_mbox_parse(phba, mboxq,
+						      &next_fcf_index);
+	if (!new_fcf_record) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_FIP,
+				"2765 Mailbox command READ_FCF_RECORD "
+				"failed to retrieve a FCF record.\n");
+		/* Let next new FCF event trigger fast failover */
+		spin_lock_irq(&phba->hbalock);
+		phba->hba_flag &= ~FCF_DISC_INPROGRESS;
+		spin_unlock_irq(&phba->hbalock);
+		lpfc_sli4_mbox_cmd_free(phba, mboxq);
+		return;
+	}
+
+	/* Check the FCF record against the connection list */
 	rc = lpfc_match_fcf_conn_list(phba, new_fcf_record, &boot_flag,
 				      &addr_mode, &vlan_id);
+
+	/* Log the FCF record information if turned on */
+	lpfc_sli4_log_fcf_record_info(phba, new_fcf_record, vlan_id,
+				      next_fcf_index);
+
 	/*
 	 * If the fcf record does not match with connect list entries
-	 * read the next entry.
+	 * read the next entry; otherwise, this is an eligible FCF
+	 * record for round robin FCF failover.
 	 */
-	if (!rc)
+	if (!rc) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_FIP,
+				"2781 FCF record fcf_index:x%x failed FCF "
+				"connection list check, fcf_avail:x%x, "
+				"fcf_valid:x%x\n",
+				bf_get(lpfc_fcf_record_fcf_index,
+				       new_fcf_record),
+				bf_get(lpfc_fcf_record_fcf_avail,
+				       new_fcf_record),
+				bf_get(lpfc_fcf_record_fcf_valid,
+				       new_fcf_record));
 		goto read_next_fcf;
+	} else {
+		fcf_index = bf_get(lpfc_fcf_record_fcf_index, new_fcf_record);
+		rc = lpfc_sli4_fcf_rr_index_set(phba, fcf_index);
+		if (rc)
+			goto read_next_fcf;
+	}
+
 	/*
 	 * If this is not the first FCF discovery of the HBA, use last
 	 * FCF record for the discovery. The condition that a rescan
 	 * matches the in-use FCF record: fabric name, switch name, mac
 	 * address, and vlan_id.
 	 */
-	spin_lock_irqsave(&phba->hbalock, iflags);
+	spin_lock_irq(&phba->hbalock);
 	if (phba->fcf.fcf_flag & FCF_IN_USE) {
 		if (lpfc_fab_name_match(phba->fcf.current_rec.fabric_name,
 					new_fcf_record) &&
@@ -1649,8 +1755,9 @@ lpfc_mbx_cmpl_read_fcf_record(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
 				__lpfc_sli4_stop_fcf_redisc_wait_timer(phba);
 			else if (phba->fcf.fcf_flag & FCF_REDISC_FOV)
 				/* If in fast failover, mark it's completed */
-				phba->fcf.fcf_flag &= ~FCF_REDISC_FOV;
-			spin_unlock_irqrestore(&phba->hbalock, iflags);
+				phba->fcf.fcf_flag &= ~(FCF_REDISC_FOV |
+							FCF_DISCOVERY);
+			spin_unlock_irq(&phba->hbalock);
 			goto out;
 		}
 		/*
@@ -1661,7 +1768,7 @@ lpfc_mbx_cmpl_read_fcf_record(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
 		 * next candidate.
 		 */
 		if (!(phba->fcf.fcf_flag & FCF_REDISC_FOV)) {
-			spin_unlock_irqrestore(&phba->hbalock, iflags);
+			spin_unlock_irq(&phba->hbalock);
 			goto read_next_fcf;
 		}
 	}
@@ -1669,14 +1776,9 @@ lpfc_mbx_cmpl_read_fcf_record(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
 	 * Update on failover FCF record only if it's in FCF fast-failover
 	 * period; otherwise, update on current FCF record.
 	 */
-	if (phba->fcf.fcf_flag & FCF_REDISC_FOV) {
-		/* Fast FCF failover only to the same fabric name */
-		if (lpfc_fab_name_match(phba->fcf.current_rec.fabric_name,
-					new_fcf_record))
-			fcf_rec = &phba->fcf.failover_rec;
-		else
-			goto read_next_fcf;
-	} else
+	if (phba->fcf.fcf_flag & FCF_REDISC_FOV)
+		fcf_rec = &phba->fcf.failover_rec;
+	else
 		fcf_rec = &phba->fcf.current_rec;
 
 	if (phba->fcf.fcf_flag & FCF_AVAILABLE) {
@@ -1689,7 +1791,7 @@ lpfc_mbx_cmpl_read_fcf_record(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
 			/* Choose this FCF record */
 			__lpfc_update_fcf_record(phba, fcf_rec, new_fcf_record,
 					addr_mode, vlan_id, BOOT_ENABLE);
-			spin_unlock_irqrestore(&phba->hbalock, iflags);
+			spin_unlock_irq(&phba->hbalock);
 			goto read_next_fcf;
 		}
 		/*
@@ -1698,20 +1800,19 @@ lpfc_mbx_cmpl_read_fcf_record(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
 		 * the next FCF record.
 		 */
 		if (!boot_flag && (fcf_rec->flag & BOOT_ENABLE)) {
-			spin_unlock_irqrestore(&phba->hbalock, iflags);
+			spin_unlock_irq(&phba->hbalock);
 			goto read_next_fcf;
 		}
 		/*
 		 * If the new hba FCF record has lower priority value
 		 * than the driver FCF record, use the new record.
 		 */
-		if (lpfc_fab_name_match(fcf_rec->fabric_name, new_fcf_record) &&
-		    (new_fcf_record->fip_priority < fcf_rec->priority)) {
+		if (new_fcf_record->fip_priority < fcf_rec->priority) {
 			/* Choose this FCF record */
 			__lpfc_update_fcf_record(phba, fcf_rec, new_fcf_record,
 					addr_mode, vlan_id, 0);
 		}
-		spin_unlock_irqrestore(&phba->hbalock, iflags);
+		spin_unlock_irq(&phba->hbalock);
 		goto read_next_fcf;
 	}
 	/*
@@ -1724,7 +1825,7 @@ lpfc_mbx_cmpl_read_fcf_record(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
 					 BOOT_ENABLE : 0));
 		phba->fcf.fcf_flag |= FCF_AVAILABLE;
 	}
-	spin_unlock_irqrestore(&phba->hbalock, iflags);
+	spin_unlock_irq(&phba->hbalock);
 	goto read_next_fcf;
 
 read_next_fcf:
@@ -1740,9 +1841,22 @@ read_next_fcf:
 			 * FCF scan inprogress, and do nothing
 			 */
 			if (!(phba->fcf.failover_rec.flag & RECORD_VALID)) {
-				spin_lock_irqsave(&phba->hbalock, iflags);
+				lpfc_printf_log(phba, KERN_WARNING, LOG_FIP,
+					       "2782 No suitable FCF record "
+					       "found during this round of "
+					       "post FCF rediscovery scan: "
+					       "fcf_evt_tag:x%x, fcf_index: "
+					       "x%x\n",
+					       phba->fcoe_eventtag_at_fcf_scan,
+					       bf_get(lpfc_fcf_record_fcf_index,
+						      new_fcf_record));
+				/*
+				 * Let next new FCF event trigger fast
+				 * failover
+				 */
+				spin_lock_irq(&phba->hbalock);
 				phba->hba_flag &= ~FCF_DISC_INPROGRESS;
-				spin_unlock_irqrestore(&phba->hbalock, iflags);
+				spin_unlock_irq(&phba->hbalock);
 				return;
 			}
 			/*
@@ -1754,16 +1868,23 @@ read_next_fcf:
 			 * record.
 			 */
 
-			/* unregister the current in-use FCF record */
+			/* Unregister the current in-use FCF record */
 			lpfc_unregister_fcf(phba);
-			/* replace in-use record with the new record */
+
+			/* Replace in-use record with the new record */
 			memcpy(&phba->fcf.current_rec,
 			       &phba->fcf.failover_rec,
 			       sizeof(struct lpfc_fcf_rec));
 			/* mark the FCF fast failover completed */
-			spin_lock_irqsave(&phba->hbalock, iflags);
+			spin_lock_irq(&phba->hbalock);
 			phba->fcf.fcf_flag &= ~FCF_REDISC_FOV;
-			spin_unlock_irqrestore(&phba->hbalock, iflags);
+			spin_unlock_irq(&phba->hbalock);
+			/*
+			 * Set up the initial registered FCF index for FLOGI
+			 * round robin FCF failover.
+			 */
+			phba->fcf.fcf_rr_init_indx =
+					phba->fcf.failover_rec.fcf_indx;
 			/* Register to the new FCF record */
 			lpfc_register_fcf(phba);
 		} else {
@@ -1776,13 +1897,25 @@ read_next_fcf:
 				return;
 			/*
 			 * Otherwise, initial scan or post linkdown rescan,
-			 * register with the best fit FCF record found so
-			 * far through the scanning process.
+			 * register with the best FCF record found so far
+			 * through the FCF scanning process.
+			 */
+
+			/* mark the initial FCF discovery completed */
+			spin_lock_irq(&phba->hbalock);
+			phba->fcf.fcf_flag &= ~FCF_INIT_DISC;
+			spin_unlock_irq(&phba->hbalock);
+			/*
+			 * Set up the initial registered FCF index for FLOGI
+			 * round robin FCF failover
 			 */
+			phba->fcf.fcf_rr_init_indx =
+					phba->fcf.current_rec.fcf_indx;
+			/* Register to the new FCF record */
 			lpfc_register_fcf(phba);
 		}
 	} else
-		lpfc_sli4_read_fcf_record(phba, next_fcf_index);
+		lpfc_sli4_fcf_scan_read_fcf_rec(phba, next_fcf_index);
 	return;
 
 out:
@@ -1793,6 +1926,141 @@ out:
 }
 
 /**
+ * lpfc_mbx_cmpl_fcf_rr_read_fcf_rec - fcf round robin read_fcf mbox cmpl hdler
+ * @phba: pointer to lpfc hba data structure.
+ * @mboxq: pointer to mailbox object.
+ *
+ * This is the callback function for FLOGI failure round robin FCF failover
+ * read FCF record mailbox command from the eligible FCF record bmask for
+ * performing the failover. If the FCF read back is not valid/available, it
+ * fails through to retrying FLOGI to the currently registered FCF again.
+ * Otherwise, if the FCF read back is valid and available, it will set the
+ * newly read FCF record to the failover FCF record, unregister currently
+ * registered FCF record, copy the failover FCF record to the current
+ * FCF record, and then register the current FCF record before proceeding
+ * to trying FLOGI on the new failover FCF.
+ */
+void
+lpfc_mbx_cmpl_fcf_rr_read_fcf_rec(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+	struct fcf_record *new_fcf_record;
+	uint32_t boot_flag, addr_mode;
+	uint16_t next_fcf_index;
+	uint16_t current_fcf_index;
+	uint16_t vlan_id;
+
+	/* If link state is not up, stop the round robin failover process */
+	if (phba->link_state < LPFC_LINK_UP) {
+		spin_lock_irq(&phba->hbalock);
+		phba->fcf.fcf_flag &= ~FCF_DISCOVERY;
+		spin_unlock_irq(&phba->hbalock);
+		lpfc_sli4_mbox_cmd_free(phba, mboxq);
+		return;
+	}
+
+	/* Parse the FCF record from the non-embedded mailbox command */
+	new_fcf_record = lpfc_sli4_fcf_rec_mbox_parse(phba, mboxq,
+						      &next_fcf_index);
+	if (!new_fcf_record) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_FIP,
+				"2766 Mailbox command READ_FCF_RECORD "
+				"failed to retrieve a FCF record.\n");
+		goto out;
+	}
+
+	/* Get the needed parameters from FCF record */
+	lpfc_match_fcf_conn_list(phba, new_fcf_record, &boot_flag,
+				 &addr_mode, &vlan_id);
+
+	/* Log the FCF record information if turned on */
+	lpfc_sli4_log_fcf_record_info(phba, new_fcf_record, vlan_id,
+				      next_fcf_index);
+
+	/* Upload new FCF record to the failover FCF record */
+	spin_lock_irq(&phba->hbalock);
+	__lpfc_update_fcf_record(phba, &phba->fcf.failover_rec,
+				 new_fcf_record, addr_mode, vlan_id,
+				 (boot_flag ? BOOT_ENABLE : 0));
+	spin_unlock_irq(&phba->hbalock);
+
+	current_fcf_index = phba->fcf.current_rec.fcf_indx;
+
+	/* Unregister the current in-use FCF record */
+	lpfc_unregister_fcf(phba);
+
+	/* Replace in-use record with the new record */
+	memcpy(&phba->fcf.current_rec, &phba->fcf.failover_rec,
+	       sizeof(struct lpfc_fcf_rec));
+
+	lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
+			"2783 FLOGI round robin FCF failover from FCF "
+			"(index:x%x) to FCF (index:x%x).\n",
+			current_fcf_index,
+			bf_get(lpfc_fcf_record_fcf_index, new_fcf_record));
+
+out:
+	lpfc_sli4_mbox_cmd_free(phba, mboxq);
+	lpfc_register_fcf(phba);
+}
+
+/**
+ * lpfc_mbx_cmpl_read_fcf_rec - read fcf completion handler.
+ * @phba: pointer to lpfc hba data structure.
+ * @mboxq: pointer to mailbox object.
+ *
+ * This is the callback function of read FCF record mailbox command for
+ * updating the eligible FCF bmask for FLOGI failure round robin FCF
+ * failover when a new FCF event happened. If the FCF read back is
+ * valid/available and it passes the connection list check, it updates
+ * the bmask for the eligible FCF record for round robin failover.
+ */
+void
+lpfc_mbx_cmpl_read_fcf_rec(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+	struct fcf_record *new_fcf_record;
+	uint32_t boot_flag, addr_mode;
+	uint16_t fcf_index, next_fcf_index;
+	uint16_t vlan_id;
+	int rc;
+
+	/* If link state is not up, no need to proceed */
+	if (phba->link_state < LPFC_LINK_UP)
+		goto out;
+
+	/* If FCF discovery period is over, no need to proceed */
+	if (phba->fcf.fcf_flag & FCF_DISCOVERY)
+		goto out;
+
+	/* Parse the FCF record from the non-embedded mailbox command */
+	new_fcf_record = lpfc_sli4_fcf_rec_mbox_parse(phba, mboxq,
+						      &next_fcf_index);
+	if (!new_fcf_record) {
+		lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
+				"2767 Mailbox command READ_FCF_RECORD "
+				"failed to retrieve a FCF record.\n");
+		goto out;
+	}
+
+	/* Check the connection list for eligibility */
+	rc = lpfc_match_fcf_conn_list(phba, new_fcf_record, &boot_flag,
+				      &addr_mode, &vlan_id);
+
+	/* Log the FCF record information if turned on */
+	lpfc_sli4_log_fcf_record_info(phba, new_fcf_record, vlan_id,
+				      next_fcf_index);
+
+	if (!rc)
+		goto out;
+
+	/* Update the eligible FCF record index bmask */
+	fcf_index = bf_get(lpfc_fcf_record_fcf_index, new_fcf_record);
+	rc = lpfc_sli4_fcf_rr_index_set(phba, fcf_index);
+
+out:
+	lpfc_sli4_mbox_cmd_free(phba, mboxq);
+}
+
+/**
  * lpfc_init_vpi_cmpl - Completion handler for init_vpi mbox command.
  * @phba: pointer to lpfc hba data structure.
  * @mboxq: pointer to mailbox data structure.
@@ -2024,8 +2292,6 @@ lpfc_mbx_process_link_up(struct lpfc_hba *phba, READ_LA_VAR *la)
 	int rc;
 	struct fcf_record *fcf_record;
 
-	sparam_mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
-
 	spin_lock_irq(&phba->hbalock);
 	switch (la->UlnkSpeed) {
 	case LA_1GHZ_LINK:
@@ -2117,18 +2383,24 @@ lpfc_mbx_process_link_up(struct lpfc_hba *phba, READ_LA_VAR *la)
 	spin_unlock_irq(&phba->hbalock);
 
 	lpfc_linkup(phba);
-	if (sparam_mbox) {
-		lpfc_read_sparam(phba, sparam_mbox, 0);
-		sparam_mbox->vport = vport;
-		sparam_mbox->mbox_cmpl = lpfc_mbx_cmpl_read_sparam;
-		rc = lpfc_sli_issue_mbox(phba, sparam_mbox, MBX_NOWAIT);
-		if (rc == MBX_NOT_FINISHED) {
-			mp = (struct lpfc_dmabuf *) sparam_mbox->context1;
-			lpfc_mbuf_free(phba, mp->virt, mp->phys);
-			kfree(mp);
-			mempool_free(sparam_mbox, phba->mbox_mem_pool);
-			goto out;
-		}
+	sparam_mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!sparam_mbox)
+		goto out;
+
+	rc = lpfc_read_sparam(phba, sparam_mbox, 0);
+	if (rc) {
+		mempool_free(sparam_mbox, phba->mbox_mem_pool);
+		goto out;
+	}
+	sparam_mbox->vport = vport;
+	sparam_mbox->mbox_cmpl = lpfc_mbx_cmpl_read_sparam;
+	rc = lpfc_sli_issue_mbox(phba, sparam_mbox, MBX_NOWAIT);
+	if (rc == MBX_NOT_FINISHED) {
+		mp = (struct lpfc_dmabuf *) sparam_mbox->context1;
+		lpfc_mbuf_free(phba, mp->virt, mp->phys);
+		kfree(mp);
+		mempool_free(sparam_mbox, phba->mbox_mem_pool);
+		goto out;
 	}
 
 	if (!(phba->hba_flag & HBA_FCOE_SUPPORT)) {
@@ -2186,10 +2458,20 @@ lpfc_mbx_process_link_up(struct lpfc_hba *phba, READ_LA_VAR *la)
 			spin_unlock_irq(&phba->hbalock);
 			return;
 		}
+		/* This is the initial FCF discovery scan */
+		phba->fcf.fcf_flag |= FCF_INIT_DISC;
 		spin_unlock_irq(&phba->hbalock);
-		rc = lpfc_sli4_read_fcf_record(phba, LPFC_FCOE_FCF_GET_FIRST);
-		if (rc)
+		lpfc_printf_log(phba, KERN_INFO, LOG_FIP | LOG_DISCOVERY,
+				"2778 Start FCF table scan at linkup\n");
+
+		rc = lpfc_sli4_fcf_scan_read_fcf_rec(phba,
+						     LPFC_FCOE_FCF_GET_FIRST);
+		if (rc) {
+			spin_lock_irq(&phba->hbalock);
+			phba->fcf.fcf_flag &= ~FCF_INIT_DISC;
+			spin_unlock_irq(&phba->hbalock);
 			goto out;
+		}
 	}
 
 	return;
@@ -3379,8 +3661,12 @@ lpfc_unreg_hba_rpis(struct lpfc_hba *phba)
 		shost = lpfc_shost_from_vport(vports[i]);
 		spin_lock_irq(shost->host_lock);
 		list_for_each_entry(ndlp, &vports[i]->fc_nodes, nlp_listp) {
-			if (ndlp->nlp_flag & NLP_RPI_VALID)
+			if (ndlp->nlp_flag & NLP_RPI_VALID) {
+				/* The mempool_alloc might sleep */
+				spin_unlock_irq(shost->host_lock);
 				lpfc_unreg_rpi(vports[i], ndlp);
+				spin_lock_irq(shost->host_lock);
+			}
 		}
 		spin_unlock_irq(shost->host_lock);
 	}
@@ -4756,6 +5042,7 @@ lpfc_unregister_fcf_rescan(struct lpfc_hba *phba)
 		return;
 	/* Reset HBA FCF states after successful unregister FCF */
 	phba->fcf.fcf_flag = 0;
+	phba->fcf.current_rec.flag = 0;
 
 	/*
 	 * If driver is not unloading, check if there is any other
@@ -4765,13 +5052,21 @@ lpfc_unregister_fcf_rescan(struct lpfc_hba *phba)
 	    (phba->link_state < LPFC_LINK_UP))
 		return;
 
-	rc = lpfc_sli4_read_fcf_record(phba, LPFC_FCOE_FCF_GET_FIRST);
+	/* This is considered as the initial FCF discovery scan */
+	spin_lock_irq(&phba->hbalock);
+	phba->fcf.fcf_flag |= FCF_INIT_DISC;
+	spin_unlock_irq(&phba->hbalock);
+	rc = lpfc_sli4_fcf_scan_read_fcf_rec(phba, LPFC_FCOE_FCF_GET_FIRST);
 
-	if (rc)
+	if (rc) {
+		spin_lock_irq(&phba->hbalock);
+		phba->fcf.fcf_flag &= ~FCF_INIT_DISC;
+		spin_unlock_irq(&phba->hbalock);
 		lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
 				"2553 lpfc_unregister_unused_fcf failed "
 				"to read FCF record HBA state x%x\n",
 				phba->pport->port_state);
+	}
 }
 
 /**
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index d29ac7c317d9..ea44239eeb33 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -350,7 +350,12 @@ lpfc_config_port_post(struct lpfc_hba *phba)
 	mb = &pmb->u.mb;
 
 	/* Get login parameters for NID.  */
-	lpfc_read_sparam(phba, pmb, 0);
+	rc = lpfc_read_sparam(phba, pmb, 0);
+	if (rc) {
+		mempool_free(pmb, phba->mbox_mem_pool);
+		return -ENOMEM;
+	}
+
 	pmb->vport = vport;
 	if (lpfc_sli_issue_mbox(phba, pmb, MBX_POLL) != MBX_SUCCESS) {
 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
@@ -359,7 +364,7 @@ lpfc_config_port_post(struct lpfc_hba *phba)
 				mb->mbxCommand, mb->mbxStatus);
 		phba->link_state = LPFC_HBA_ERROR;
 		mp = (struct lpfc_dmabuf *) pmb->context1;
-		mempool_free( pmb, phba->mbox_mem_pool);
+		mempool_free(pmb, phba->mbox_mem_pool);
 		lpfc_mbuf_free(phba, mp->virt, mp->phys);
 		kfree(mp);
 		return -EIO;
@@ -544,7 +549,7 @@ lpfc_config_port_post(struct lpfc_hba *phba)
 			mempool_free(pmb, phba->mbox_mem_pool);
 			return -EIO;
 		}
-	} else if (phba->cfg_suppress_link_up == 0) {
+	} else if (phba->cfg_suppress_link_up == LPFC_INITIALIZE_LINK) {
 		lpfc_init_link(phba, pmb, phba->cfg_topology,
 			phba->cfg_link_speed);
 		pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
@@ -571,6 +576,11 @@ lpfc_config_port_post(struct lpfc_hba *phba)
 	}
 	/* MBOX buffer will be freed in mbox compl */
 	pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!pmb) {
+		phba->link_state = LPFC_HBA_ERROR;
+		return -ENOMEM;
+	}
+
 	lpfc_config_async(phba, pmb, LPFC_ELS_RING);
 	pmb->mbox_cmpl = lpfc_config_async_cmpl;
 	pmb->vport = phba->pport;
@@ -588,6 +598,11 @@ lpfc_config_port_post(struct lpfc_hba *phba)
 
 	/* Get Option rom version */
 	pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!pmb) {
+		phba->link_state = LPFC_HBA_ERROR;
+		return -ENOMEM;
+	}
+
 	lpfc_dump_wakeup_param(phba, pmb);
 	pmb->mbox_cmpl = lpfc_dump_wakeup_param_cmpl;
 	pmb->vport = phba->pport;
@@ -652,7 +667,7 @@ lpfc_hba_init_link(struct lpfc_hba *phba)
 			mempool_free(pmb, phba->mbox_mem_pool);
 		return -EIO;
 	}
-	phba->cfg_suppress_link_up = 0;
+	phba->cfg_suppress_link_up = LPFC_INITIALIZE_LINK;
 
 	return 0;
 }
@@ -807,6 +822,8 @@ lpfc_hba_down_post_s4(struct lpfc_hba *phba)
 	LIST_HEAD(aborts);
 	int ret;
 	unsigned long iflag = 0;
+	struct lpfc_sglq *sglq_entry = NULL;
+
 	ret = lpfc_hba_down_post_s3(phba);
 	if (ret)
 		return ret;
@@ -822,6 +839,10 @@ lpfc_hba_down_post_s4(struct lpfc_hba *phba)
 	 * list.
 	 */
 	spin_lock(&phba->sli4_hba.abts_sgl_list_lock);
+	list_for_each_entry(sglq_entry,
+		&phba->sli4_hba.lpfc_abts_els_sgl_list, list)
+		sglq_entry->state = SGL_FREED;
+
 	list_splice_init(&phba->sli4_hba.lpfc_abts_els_sgl_list,
 			&phba->sli4_hba.lpfc_sgl_list);
 	spin_unlock(&phba->sli4_hba.abts_sgl_list_lock);
@@ -2178,8 +2199,10 @@ lpfc_stop_vport_timers(struct lpfc_vport *vport)
 void
 __lpfc_sli4_stop_fcf_redisc_wait_timer(struct lpfc_hba *phba)
 {
-	/* Clear pending FCF rediscovery wait timer */
-	phba->fcf.fcf_flag &= ~FCF_REDISC_PEND;
+	/* Clear pending FCF rediscovery wait and failover in progress flags */
+	phba->fcf.fcf_flag &= ~(FCF_REDISC_PEND |
+				FCF_DEAD_DISC |
+				FCF_ACVL_DISC);
 	/* Now, try to stop the timer */
 	del_timer(&phba->fcf.redisc_wait);
 }
@@ -2576,6 +2599,14 @@ lpfc_create_port(struct lpfc_hba *phba, int instance, struct device *dev)
 	init_timer(&vport->els_tmofunc);
 	vport->els_tmofunc.function = lpfc_els_timeout;
 	vport->els_tmofunc.data = (unsigned long)vport;
+	if (phba->pcidev->device == PCI_DEVICE_ID_HORNET) {
+		phba->menlo_flag |= HBA_MENLO_SUPPORT;
+		/* check for menlo minimum sg count */
+		if (phba->cfg_sg_seg_cnt < LPFC_DEFAULT_MENLO_SG_SEG_CNT) {
+			phba->cfg_sg_seg_cnt = LPFC_DEFAULT_MENLO_SG_SEG_CNT;
+			shost->sg_tablesize = phba->cfg_sg_seg_cnt;
+		}
+	}
 
 	error = scsi_add_host_with_dma(shost, dev, &phba->pcidev->dev);
 	if (error)
@@ -2912,6 +2943,9 @@ lpfc_sli4_fcf_redisc_wait_tmo(unsigned long ptr)
 	/* FCF rediscovery event to worker thread */
 	phba->fcf.fcf_flag |= FCF_REDISC_EVT;
 	spin_unlock_irq(&phba->hbalock);
+	lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
+			"2776 FCF rediscover wait timer expired, post "
+			"a worker thread event for FCF table scan\n");
 	/* wake up worker thread */
 	lpfc_worker_wake_up(phba);
 }
@@ -3183,6 +3217,68 @@ out_free_pmb:
 }
 
 /**
+ * lpfc_sli4_perform_vport_cvl - Perform clear virtual link on a vport
+ * @vport: pointer to vport data structure.
+ *
+ * This routine is to perform Clear Virtual Link (CVL) on a vport in
+ * response to a CVL event.
+ *
+ * Return the pointer to the ndlp with the vport if successful, otherwise
+ * return NULL.
+ **/
+static struct lpfc_nodelist *
+lpfc_sli4_perform_vport_cvl(struct lpfc_vport *vport)
+{
+	struct lpfc_nodelist *ndlp;
+	struct Scsi_Host *shost;
+	struct lpfc_hba *phba;
+
+	if (!vport)
+		return NULL;
+	ndlp = lpfc_findnode_did(vport, Fabric_DID);
+	if (!ndlp)
+		return NULL;
+	phba = vport->phba;
+	if (!phba)
+		return NULL;
+	if (phba->pport->port_state <= LPFC_FLOGI)
+		return NULL;
+	/* If virtual link is not yet instantiated ignore CVL */
+	if (vport->port_state <= LPFC_FDISC)
+		return NULL;
+	shost = lpfc_shost_from_vport(vport);
+	if (!shost)
+		return NULL;
+	lpfc_linkdown_port(vport);
+	lpfc_cleanup_pending_mbox(vport);
+	spin_lock_irq(shost->host_lock);
+	vport->fc_flag |= FC_VPORT_CVL_RCVD;
+	spin_unlock_irq(shost->host_lock);
+
+	return ndlp;
+}
+
+/**
+ * lpfc_sli4_perform_all_vport_cvl - Perform clear virtual link on all vports
+ * @vport: pointer to lpfc hba data structure.
+ *
+ * This routine is to perform Clear Virtual Link (CVL) on all vports in
+ * response to a FCF dead event.
+ **/
+static void
+lpfc_sli4_perform_all_vport_cvl(struct lpfc_hba *phba)
+{
+	struct lpfc_vport **vports;
+	int i;
+
+	vports = lpfc_create_vport_work_array(phba);
+	if (vports)
+		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++)
+			lpfc_sli4_perform_vport_cvl(vports[i]);
+	lpfc_destroy_vport_work_array(phba, vports);
+}
+
+/**
  * lpfc_sli4_async_fcoe_evt - Process the asynchronous fcoe event
  * @phba: pointer to lpfc hba data structure.
  * @acqe_link: pointer to the async fcoe completion queue entry.
@@ -3198,7 +3294,6 @@ lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba,
 	struct lpfc_vport *vport;
 	struct lpfc_nodelist *ndlp;
 	struct Scsi_Host  *shost;
-	uint32_t link_state;
 	int active_vlink_present;
 	struct lpfc_vport **vports;
 	int i;
@@ -3208,10 +3303,11 @@ lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba,
 	switch (event_type) {
 	case LPFC_FCOE_EVENT_TYPE_NEW_FCF:
 	case LPFC_FCOE_EVENT_TYPE_FCF_PARAM_MOD:
-		lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
-			"2546 New FCF found index 0x%x tag 0x%x\n",
-			acqe_fcoe->index,
-			acqe_fcoe->event_tag);
+		lpfc_printf_log(phba, KERN_ERR, LOG_FIP | LOG_DISCOVERY,
+			"2546 New FCF found/FCF parameter modified event: "
+			"evt_tag:x%x, fcf_index:x%x\n",
+			acqe_fcoe->event_tag, acqe_fcoe->index);
+
 		spin_lock_irq(&phba->hbalock);
 		if ((phba->fcf.fcf_flag & FCF_SCAN_DONE) ||
 		    (phba->hba_flag & FCF_DISC_INPROGRESS)) {
@@ -3222,6 +3318,7 @@ lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba,
 			spin_unlock_irq(&phba->hbalock);
 			break;
 		}
+
 		if (phba->fcf.fcf_flag & FCF_REDISC_EVT) {
 			/*
 			 * If fast FCF failover rescan event is pending,
@@ -3232,12 +3329,33 @@ lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba,
 		}
 		spin_unlock_irq(&phba->hbalock);
 
-		/* Read the FCF table and re-discover SAN. */
-		rc = lpfc_sli4_read_fcf_record(phba, LPFC_FCOE_FCF_GET_FIRST);
+		if ((phba->fcf.fcf_flag & FCF_DISCOVERY) &&
+		    !(phba->fcf.fcf_flag & FCF_REDISC_FOV)) {
+			/*
+			 * During period of FCF discovery, read the FCF
+			 * table record indexed by the event to update
+			 * FCF round robin failover eligible FCF bmask.
+			 */
+			lpfc_printf_log(phba, KERN_INFO, LOG_FIP |
+					LOG_DISCOVERY,
+					"2779 Read new FCF record with "
+					"fcf_index:x%x for updating FCF "
+					"round robin failover bmask\n",
+					acqe_fcoe->index);
+			rc = lpfc_sli4_read_fcf_rec(phba, acqe_fcoe->index);
+		}
+
+		/* Otherwise, scan the entire FCF table and re-discover SAN */
+		lpfc_printf_log(phba, KERN_INFO, LOG_FIP | LOG_DISCOVERY,
+				"2770 Start FCF table scan due to new FCF "
+				"event: evt_tag:x%x, fcf_index:x%x\n",
+				acqe_fcoe->event_tag, acqe_fcoe->index);
+		rc = lpfc_sli4_fcf_scan_read_fcf_rec(phba,
+						     LPFC_FCOE_FCF_GET_FIRST);
 		if (rc)
-			lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
-					"2547 Read FCF record failed 0x%x\n",
-					rc);
+			lpfc_printf_log(phba, KERN_ERR, LOG_FIP | LOG_DISCOVERY,
+					"2547 Issue FCF scan read FCF mailbox "
+					"command failed 0x%x\n", rc);
 		break;
 
 	case LPFC_FCOE_EVENT_TYPE_FCF_TABLE_FULL:
@@ -3248,47 +3366,63 @@ lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba,
 		break;
 
 	case LPFC_FCOE_EVENT_TYPE_FCF_DEAD:
-		lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
+		lpfc_printf_log(phba, KERN_ERR, LOG_FIP | LOG_DISCOVERY,
 			"2549 FCF disconnected from network index 0x%x"
 			" tag 0x%x\n", acqe_fcoe->index,
 			acqe_fcoe->event_tag);
 		/* If the event is not for currently used fcf do nothing */
 		if (phba->fcf.current_rec.fcf_indx != acqe_fcoe->index)
 			break;
-		/*
-		 * Currently, driver support only one FCF - so treat this as
-		 * a link down, but save the link state because we don't want
-		 * it to be changed to Link Down unless it is already down.
+		/* We request port to rediscover the entire FCF table for
+		 * a fast recovery from case that the current FCF record
+		 * is no longer valid if we are not in the middle of FCF
+		 * failover process already.
 		 */
-		link_state = phba->link_state;
-		lpfc_linkdown(phba);
-		phba->link_state = link_state;
-		/* Unregister FCF if no devices connected to it */
-		lpfc_unregister_unused_fcf(phba);
+		spin_lock_irq(&phba->hbalock);
+		if (phba->fcf.fcf_flag & FCF_DISCOVERY) {
+			spin_unlock_irq(&phba->hbalock);
+			/* Update FLOGI FCF failover eligible FCF bmask */
+			lpfc_sli4_fcf_rr_index_clear(phba, acqe_fcoe->index);
+			break;
+		}
+		/* Mark the fast failover process in progress */
+		phba->fcf.fcf_flag |= FCF_DEAD_DISC;
+		spin_unlock_irq(&phba->hbalock);
+		lpfc_printf_log(phba, KERN_INFO, LOG_FIP | LOG_DISCOVERY,
+				"2771 Start FCF fast failover process due to "
+				"FCF DEAD event: evt_tag:x%x, fcf_index:x%x "
+				"\n", acqe_fcoe->event_tag, acqe_fcoe->index);
+		rc = lpfc_sli4_redisc_fcf_table(phba);
+		if (rc) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_FIP |
+					LOG_DISCOVERY,
+					"2772 Issue FCF rediscover mabilbox "
+					"command failed, fail through to FCF "
+					"dead event\n");
+			spin_lock_irq(&phba->hbalock);
+			phba->fcf.fcf_flag &= ~FCF_DEAD_DISC;
+			spin_unlock_irq(&phba->hbalock);
+			/*
+			 * Last resort will fail over by treating this
+			 * as a link down to FCF registration.
+			 */
+			lpfc_sli4_fcf_dead_failthrough(phba);
+		} else
+			/* Handling fast FCF failover to a DEAD FCF event
+			 * is considered equalivant to receiving CVL to all
+			 * vports.
+			 */
+			lpfc_sli4_perform_all_vport_cvl(phba);
 		break;
 	case LPFC_FCOE_EVENT_TYPE_CVL:
-		lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
+		lpfc_printf_log(phba, KERN_ERR, LOG_FIP | LOG_DISCOVERY,
 			"2718 Clear Virtual Link Received for VPI 0x%x"
 			" tag 0x%x\n", acqe_fcoe->index, acqe_fcoe->event_tag);
 		vport = lpfc_find_vport_by_vpid(phba,
 				acqe_fcoe->index - phba->vpi_base);
-		if (!vport)
-			break;
-		ndlp = lpfc_findnode_did(vport, Fabric_DID);
+		ndlp = lpfc_sli4_perform_vport_cvl(vport);
 		if (!ndlp)
 			break;
-		shost = lpfc_shost_from_vport(vport);
-		if (phba->pport->port_state <= LPFC_FLOGI)
-			break;
-		/* If virtual link is not yet instantiated ignore CVL */
-		if (vport->port_state <= LPFC_FDISC)
-			break;
-
-		lpfc_linkdown_port(vport);
-		lpfc_cleanup_pending_mbox(vport);
-		spin_lock_irq(shost->host_lock);
-		vport->fc_flag |= FC_VPORT_CVL_RCVD;
-		spin_unlock_irq(shost->host_lock);
 		active_vlink_present = 0;
 
 		vports = lpfc_create_vport_work_array(phba);
@@ -3311,6 +3445,7 @@ lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba,
 			 * re-instantiate the Vlink using FDISC.
 			 */
 			mod_timer(&ndlp->nlp_delayfunc, jiffies + HZ);
+			shost = lpfc_shost_from_vport(vport);
 			spin_lock_irq(shost->host_lock);
 			ndlp->nlp_flag |= NLP_DELAY_TMO;
 			spin_unlock_irq(shost->host_lock);
@@ -3321,15 +3456,38 @@ lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba,
 			 * Otherwise, we request port to rediscover
 			 * the entire FCF table for a fast recovery
 			 * from possible case that the current FCF
-			 * is no longer valid.
+			 * is no longer valid if we are not already
+			 * in the FCF failover process.
 			 */
+			spin_lock_irq(&phba->hbalock);
+			if (phba->fcf.fcf_flag & FCF_DISCOVERY) {
+				spin_unlock_irq(&phba->hbalock);
+				break;
+			}
+			/* Mark the fast failover process in progress */
+			phba->fcf.fcf_flag |= FCF_ACVL_DISC;
+			spin_unlock_irq(&phba->hbalock);
+			lpfc_printf_log(phba, KERN_INFO, LOG_FIP |
+					LOG_DISCOVERY,
+					"2773 Start FCF fast failover due "
+					"to CVL event: evt_tag:x%x\n",
+					acqe_fcoe->event_tag);
 			rc = lpfc_sli4_redisc_fcf_table(phba);
-			if (rc)
+			if (rc) {
+				lpfc_printf_log(phba, KERN_ERR, LOG_FIP |
+						LOG_DISCOVERY,
+						"2774 Issue FCF rediscover "
+						"mabilbox command failed, "
+						"through to CVL event\n");
+				spin_lock_irq(&phba->hbalock);
+				phba->fcf.fcf_flag &= ~FCF_ACVL_DISC;
+				spin_unlock_irq(&phba->hbalock);
 				/*
 				 * Last resort will be re-try on the
 				 * the current registered FCF entry.
 				 */
 				lpfc_retry_pport_discovery(phba);
+			}
 		}
 		break;
 	default:
@@ -3426,11 +3584,14 @@ void lpfc_sli4_fcf_redisc_event_proc(struct lpfc_hba *phba)
 	spin_unlock_irq(&phba->hbalock);
 
 	/* Scan FCF table from the first entry to re-discover SAN */
-	rc = lpfc_sli4_read_fcf_record(phba, LPFC_FCOE_FCF_GET_FIRST);
+	lpfc_printf_log(phba, KERN_INFO, LOG_FIP | LOG_DISCOVERY,
+			"2777 Start FCF table scan after FCF "
+			"rediscovery quiescent period over\n");
+	rc = lpfc_sli4_fcf_scan_read_fcf_rec(phba, LPFC_FCOE_FCF_GET_FIRST);
 	if (rc)
-		lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
-				"2747 Post FCF rediscovery read FCF record "
-				"failed 0x%x\n", rc);
+		lpfc_printf_log(phba, KERN_ERR, LOG_FIP | LOG_DISCOVERY,
+				"2747 Issue FCF scan read FCF mailbox "
+				"command failed 0x%x\n", rc);
 }
 
 /**
@@ -3722,6 +3883,7 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
 	int rc, i, hbq_count, buf_size, dma_buf_size, max_buf_size;
 	uint8_t pn_page[LPFC_MAX_SUPPORTED_PAGES] = {0};
 	struct lpfc_mqe *mqe;
+	int longs;
 
 	/* Before proceed, wait for POST done and device ready */
 	rc = lpfc_sli4_post_status_check(phba);
@@ -3898,13 +4060,24 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
 		goto out_free_active_sgl;
 	}
 
+	/* Allocate eligible FCF bmask memory for FCF round robin failover */
+	longs = (LPFC_SLI4_FCF_TBL_INDX_MAX + BITS_PER_LONG - 1)/BITS_PER_LONG;
+	phba->fcf.fcf_rr_bmask = kzalloc(longs * sizeof(unsigned long),
+					 GFP_KERNEL);
+	if (!phba->fcf.fcf_rr_bmask) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2759 Failed allocate memory for FCF round "
+				"robin failover bmask\n");
+		goto out_remove_rpi_hdrs;
+	}
+
 	phba->sli4_hba.fcp_eq_hdl = kzalloc((sizeof(struct lpfc_fcp_eq_hdl) *
 				    phba->cfg_fcp_eq_count), GFP_KERNEL);
 	if (!phba->sli4_hba.fcp_eq_hdl) {
 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 				"2572 Failed allocate memory for fast-path "
 				"per-EQ handle array\n");
-		goto out_remove_rpi_hdrs;
+		goto out_free_fcf_rr_bmask;
 	}
 
 	phba->sli4_hba.msix_entries = kzalloc((sizeof(struct msix_entry) *
@@ -3957,6 +4130,8 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
 
 out_free_fcp_eq_hdl:
 	kfree(phba->sli4_hba.fcp_eq_hdl);
+out_free_fcf_rr_bmask:
+	kfree(phba->fcf.fcf_rr_bmask);
 out_remove_rpi_hdrs:
 	lpfc_sli4_remove_rpi_hdrs(phba);
 out_free_active_sgl:
@@ -4002,6 +4177,9 @@ lpfc_sli4_driver_resource_unset(struct lpfc_hba *phba)
 	lpfc_sli4_remove_rpi_hdrs(phba);
 	lpfc_sli4_remove_rpis(phba);
 
+	/* Free eligible FCF index bmask */
+	kfree(phba->fcf.fcf_rr_bmask);
+
 	/* Free the ELS sgl list */
 	lpfc_free_active_sgl(phba);
 	lpfc_free_sgl_list(phba);
@@ -4397,6 +4575,7 @@ lpfc_init_sgl_list(struct lpfc_hba *phba)
 
 		/* The list order is used by later block SGL registraton */
 		spin_lock_irq(&phba->hbalock);
+		sglq_entry->state = SGL_FREED;
 		list_add_tail(&sglq_entry->list, &phba->sli4_hba.lpfc_sgl_list);
 		phba->sli4_hba.lpfc_els_sgl_array[i] = sglq_entry;
 		phba->sli4_hba.total_sglq_bufs++;
diff --git a/drivers/scsi/lpfc/lpfc_logmsg.h b/drivers/scsi/lpfc/lpfc_logmsg.h
index 954ba57970a3..bb59e9273126 100644
--- a/drivers/scsi/lpfc/lpfc_logmsg.h
+++ b/drivers/scsi/lpfc/lpfc_logmsg.h
@@ -35,6 +35,7 @@
 #define LOG_VPORT	0x00004000	/* NPIV events */
 #define LOF_SECURITY	0x00008000	/* Security events */
 #define LOG_EVENT	0x00010000	/* CT,TEMP,DUMP, logging */
+#define LOG_FIP		0x00020000	/* FIP events */
 #define LOG_ALL_MSG	0xffffffff	/* LOG all messages */
 
 #define lpfc_printf_vlog(vport, level, mask, fmt, arg...) \
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index 6c4dce1a30ca..1e61ae3bc4eb 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -1748,7 +1748,7 @@ lpfc_sli4_mbox_opcode_get(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
 }
 
 /**
- * lpfc_sli4_mbx_read_fcf_record - Allocate and construct read fcf mbox cmd
+ * lpfc_sli4_mbx_read_fcf_rec - Allocate and construct read fcf mbox cmd
  * @phba: pointer to lpfc hba data structure.
  * @fcf_index: index to fcf table.
  *
@@ -1759,9 +1759,9 @@ lpfc_sli4_mbox_opcode_get(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
  * NULL.
  **/
 int
-lpfc_sli4_mbx_read_fcf_record(struct lpfc_hba *phba,
-			      struct lpfcMboxq *mboxq,
-			      uint16_t fcf_index)
+lpfc_sli4_mbx_read_fcf_rec(struct lpfc_hba *phba,
+			   struct lpfcMboxq *mboxq,
+			   uint16_t fcf_index)
 {
 	void *virt_addr;
 	dma_addr_t phys_addr;
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 7f21b47db791..b16bb2c9978b 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -620,23 +620,40 @@ lpfc_sli4_fcp_xri_aborted(struct lpfc_hba *phba,
 	uint16_t xri = bf_get(lpfc_wcqe_xa_xri, axri);
 	struct lpfc_scsi_buf *psb, *next_psb;
 	unsigned long iflag = 0;
+	struct lpfc_iocbq *iocbq;
+	int i;
 
-	spin_lock_irqsave(&phba->sli4_hba.abts_scsi_buf_list_lock, iflag);
+	spin_lock_irqsave(&phba->hbalock, iflag);
+	spin_lock(&phba->sli4_hba.abts_scsi_buf_list_lock);
 	list_for_each_entry_safe(psb, next_psb,
 		&phba->sli4_hba.lpfc_abts_scsi_buf_list, list) {
 		if (psb->cur_iocbq.sli4_xritag == xri) {
 			list_del(&psb->list);
 			psb->exch_busy = 0;
 			psb->status = IOSTAT_SUCCESS;
-			spin_unlock_irqrestore(
-				&phba->sli4_hba.abts_scsi_buf_list_lock,
-				iflag);
+			spin_unlock(
+				&phba->sli4_hba.abts_scsi_buf_list_lock);
+			spin_unlock_irqrestore(&phba->hbalock, iflag);
 			lpfc_release_scsi_buf_s4(phba, psb);
 			return;
 		}
 	}
-	spin_unlock_irqrestore(&phba->sli4_hba.abts_scsi_buf_list_lock,
-				iflag);
+	spin_unlock(&phba->sli4_hba.abts_scsi_buf_list_lock);
+	for (i = 1; i <= phba->sli.last_iotag; i++) {
+		iocbq = phba->sli.iocbq_lookup[i];
+
+		if (!(iocbq->iocb_flag &  LPFC_IO_FCP) ||
+			(iocbq->iocb_flag & LPFC_IO_LIBDFC))
+			continue;
+		if (iocbq->sli4_xritag != xri)
+			continue;
+		psb = container_of(iocbq, struct lpfc_scsi_buf, cur_iocbq);
+		psb->exch_busy = 0;
+		spin_unlock_irqrestore(&phba->hbalock, iflag);
+		return;
+
+	}
+	spin_unlock_irqrestore(&phba->hbalock, iflag);
 }
 
 /**
@@ -1006,6 +1023,7 @@ lpfc_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
 	struct scatterlist *sgel = NULL;
 	struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
 	struct ulp_bde64 *bpl = lpfc_cmd->fcp_bpl;
+	struct lpfc_iocbq *iocbq = &lpfc_cmd->cur_iocbq;
 	IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
 	struct ulp_bde64 *data_bde = iocb_cmd->unsli3.fcp_ext.dbde;
 	dma_addr_t physaddr;
@@ -1056,6 +1074,7 @@ lpfc_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
 			physaddr = sg_dma_address(sgel);
 			if (phba->sli_rev == 3 &&
 			    !(phba->sli3_options & LPFC_SLI3_BG_ENABLED) &&
+			    !(iocbq->iocb_flag & DSS_SECURITY_OP) &&
 			    nseg <= LPFC_EXT_DATA_BDE_COUNT) {
 				data_bde->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
 				data_bde->tus.f.bdeSize = sg_dma_len(sgel);
@@ -1082,7 +1101,8 @@ lpfc_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
 	 * explicitly reinitialized since all iocb memory resources are reused.
 	 */
 	if (phba->sli_rev == 3 &&
-	    !(phba->sli3_options & LPFC_SLI3_BG_ENABLED)) {
+	    !(phba->sli3_options & LPFC_SLI3_BG_ENABLED) &&
+	    !(iocbq->iocb_flag & DSS_SECURITY_OP)) {
 		if (num_bde > LPFC_EXT_DATA_BDE_COUNT) {
 			/*
 			 * The extended IOCB format can only fit 3 BDE or a BPL.
@@ -1107,6 +1127,7 @@ lpfc_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
 	} else {
 		iocb_cmd->un.fcpi64.bdl.bdeSize =
 			((num_bde + 2) * sizeof(struct ulp_bde64));
+		iocb_cmd->unsli3.fcp_ext.ebde_count = (num_bde + 1);
 	}
 	fcp_cmnd->fcpDl = cpu_to_be32(scsi_bufflen(scsi_cmnd));
 
@@ -1575,7 +1596,7 @@ lpfc_bg_scsi_prep_dma_buf(struct lpfc_hba *phba,
 		case LPFC_PG_TYPE_NO_DIF:
 			num_bde = lpfc_bg_setup_bpl(phba, scsi_cmnd, bpl,
 					datasegcnt);
-			/* we shoud have 2 or more entries in buffer list */
+			/* we should have 2 or more entries in buffer list */
 			if (num_bde < 2)
 				goto err;
 			break;
@@ -1612,7 +1633,7 @@ lpfc_bg_scsi_prep_dma_buf(struct lpfc_hba *phba,
 
 			num_bde = lpfc_bg_setup_bpl_prot(phba, scsi_cmnd, bpl,
 					datasegcnt, protsegcnt);
-			/* we shoud have 3 or more entries in buffer list */
+			/* we should have 3 or more entries in buffer list */
 			if (num_bde < 3)
 				goto err;
 			break;
@@ -2079,8 +2100,7 @@ lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
 
 	if (resp_info & RSP_LEN_VALID) {
 		rsplen = be32_to_cpu(fcprsp->rspRspLen);
-		if ((rsplen != 0 && rsplen != 4 && rsplen != 8) ||
-		    (fcprsp->rspInfo3 != RSP_NO_FAILURE)) {
+		if (rsplen != 0 && rsplen != 4 && rsplen != 8) {
 			lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
 				 "2719 Invalid response length: "
 				 "tgt x%x lun x%x cmnd x%x rsplen x%x\n",
@@ -2090,6 +2110,17 @@ lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
 			host_status = DID_ERROR;
 			goto out;
 		}
+		if (fcprsp->rspInfo3 != RSP_NO_FAILURE) {
+			lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
+				 "2757 Protocol failure detected during "
+				 "processing of FCP I/O op: "
+				 "tgt x%x lun x%x cmnd x%x rspInfo3 x%x\n",
+				 cmnd->device->id,
+				 cmnd->device->lun, cmnd->cmnd[0],
+				 fcprsp->rspInfo3);
+			host_status = DID_ERROR;
+			goto out;
+		}
 	}
 
 	if ((resp_info & SNS_LEN_VALID) && fcprsp->rspSnsLen) {
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 35e3b96d4e07..fe6660ca6452 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -494,7 +494,7 @@ __lpfc_clear_active_sglq(struct lpfc_hba *phba, uint16_t xritag)
  *
  * Returns sglq ponter = success, NULL = Failure.
  **/
-static struct lpfc_sglq *
+struct lpfc_sglq *
 __lpfc_get_active_sglq(struct lpfc_hba *phba, uint16_t xritag)
 {
 	uint16_t adj_xri;
@@ -526,6 +526,7 @@ __lpfc_sli_get_sglq(struct lpfc_hba *phba)
 		return NULL;
 	adj_xri = sglq->sli4_xritag - phba->sli4_hba.max_cfg_param.xri_base;
 	phba->sli4_hba.lpfc_sglq_active_list[adj_xri] = sglq;
+	sglq->state = SGL_ALLOCATED;
 	return sglq;
 }
 
@@ -580,15 +581,18 @@ __lpfc_sli_release_iocbq_s4(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq)
 	else
 		sglq = __lpfc_clear_active_sglq(phba, iocbq->sli4_xritag);
 	if (sglq)  {
-		if (iocbq->iocb_flag & LPFC_EXCHANGE_BUSY) {
+		if ((iocbq->iocb_flag & LPFC_EXCHANGE_BUSY) &&
+			(sglq->state != SGL_XRI_ABORTED)) {
 			spin_lock_irqsave(&phba->sli4_hba.abts_sgl_list_lock,
 					iflag);
 			list_add(&sglq->list,
 				&phba->sli4_hba.lpfc_abts_els_sgl_list);
 			spin_unlock_irqrestore(
 				&phba->sli4_hba.abts_sgl_list_lock, iflag);
-		} else
+		} else {
+			sglq->state = SGL_FREED;
 			list_add(&sglq->list, &phba->sli4_hba.lpfc_sgl_list);
+		}
 	}
 
 
@@ -2258,41 +2262,56 @@ lpfc_sli_process_sol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 					spin_unlock_irqrestore(&phba->hbalock,
 							       iflag);
 				}
-				if ((phba->sli_rev == LPFC_SLI_REV4) &&
-				    (saveq->iocb_flag & LPFC_EXCHANGE_BUSY)) {
-					/* Set cmdiocb flag for the exchange
-					 * busy so sgl (xri) will not be
-					 * released until the abort xri is
-					 * received from hba, clear the
-					 * LPFC_DRIVER_ABORTED bit in case
-					 * it was driver initiated abort.
-					 */
-					spin_lock_irqsave(&phba->hbalock,
-							  iflag);
-					cmdiocbp->iocb_flag &=
-						~LPFC_DRIVER_ABORTED;
-					cmdiocbp->iocb_flag |=
-						LPFC_EXCHANGE_BUSY;
-					spin_unlock_irqrestore(&phba->hbalock,
-							       iflag);
-					cmdiocbp->iocb.ulpStatus =
-						IOSTAT_LOCAL_REJECT;
-					cmdiocbp->iocb.un.ulpWord[4] =
-						IOERR_ABORT_REQUESTED;
-					/*
-					 * For SLI4, irsiocb contains NO_XRI
-					 * in sli_xritag, it shall not affect
-					 * releasing sgl (xri) process.
-					 */
-					saveq->iocb.ulpStatus =
-						IOSTAT_LOCAL_REJECT;
-					saveq->iocb.un.ulpWord[4] =
-						IOERR_SLI_ABORTED;
-					spin_lock_irqsave(&phba->hbalock,
-							  iflag);
-					saveq->iocb_flag |= LPFC_DELAY_MEM_FREE;
-					spin_unlock_irqrestore(&phba->hbalock,
-							       iflag);
+				if (phba->sli_rev == LPFC_SLI_REV4) {
+					if (saveq->iocb_flag &
+					    LPFC_EXCHANGE_BUSY) {
+						/* Set cmdiocb flag for the
+						 * exchange busy so sgl (xri)
+						 * will not be released until
+						 * the abort xri is received
+						 * from hba.
+						 */
+						spin_lock_irqsave(
+							&phba->hbalock, iflag);
+						cmdiocbp->iocb_flag |=
+							LPFC_EXCHANGE_BUSY;
+						spin_unlock_irqrestore(
+							&phba->hbalock, iflag);
+					}
+					if (cmdiocbp->iocb_flag &
+					    LPFC_DRIVER_ABORTED) {
+						/*
+						 * Clear LPFC_DRIVER_ABORTED
+						 * bit in case it was driver
+						 * initiated abort.
+						 */
+						spin_lock_irqsave(
+							&phba->hbalock, iflag);
+						cmdiocbp->iocb_flag &=
+							~LPFC_DRIVER_ABORTED;
+						spin_unlock_irqrestore(
+							&phba->hbalock, iflag);
+						cmdiocbp->iocb.ulpStatus =
+							IOSTAT_LOCAL_REJECT;
+						cmdiocbp->iocb.un.ulpWord[4] =
+							IOERR_ABORT_REQUESTED;
+						/*
+						 * For SLI4, irsiocb contains
+						 * NO_XRI in sli_xritag, it
+						 * shall not affect releasing
+						 * sgl (xri) process.
+						 */
+						saveq->iocb.ulpStatus =
+							IOSTAT_LOCAL_REJECT;
+						saveq->iocb.un.ulpWord[4] =
+							IOERR_SLI_ABORTED;
+						spin_lock_irqsave(
+							&phba->hbalock, iflag);
+						saveq->iocb_flag |=
+							LPFC_DELAY_MEM_FREE;
+						spin_unlock_irqrestore(
+							&phba->hbalock, iflag);
+					}
 				}
 			}
 			(cmdiocbp->iocb_cmpl) (phba, cmdiocbp, saveq);
@@ -2515,14 +2534,16 @@ lpfc_sli_handle_fast_ring_event(struct lpfc_hba *phba,
 
 			cmdiocbq = lpfc_sli_iocbq_lookup(phba, pring,
 							 &rspiocbq);
-			if ((cmdiocbq) && (cmdiocbq->iocb_cmpl)) {
-					spin_unlock_irqrestore(&phba->hbalock,
-							       iflag);
-					(cmdiocbq->iocb_cmpl)(phba, cmdiocbq,
-							      &rspiocbq);
-					spin_lock_irqsave(&phba->hbalock,
-							  iflag);
-				}
+			if (unlikely(!cmdiocbq))
+				break;
+			if (cmdiocbq->iocb_flag & LPFC_DRIVER_ABORTED)
+				cmdiocbq->iocb_flag &= ~LPFC_DRIVER_ABORTED;
+			if (cmdiocbq->iocb_cmpl) {
+				spin_unlock_irqrestore(&phba->hbalock, iflag);
+				(cmdiocbq->iocb_cmpl)(phba, cmdiocbq,
+						      &rspiocbq);
+				spin_lock_irqsave(&phba->hbalock, iflag);
+			}
 			break;
 		case LPFC_UNSOL_IOCB:
 			spin_unlock_irqrestore(&phba->hbalock, iflag);
@@ -3091,6 +3112,12 @@ lpfc_sli_brdready_s3(struct lpfc_hba *phba, uint32_t mask)
 
 	/* Check to see if any errors occurred during init */
 	if ((status & HS_FFERM) || (i >= 20)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2751 Adapter failed to restart, "
+				"status reg x%x, FW Data: A8 x%x AC x%x\n",
+				status,
+				readl(phba->MBslimaddr + 0xa8),
+				readl(phba->MBslimaddr + 0xac));
 		phba->link_state = LPFC_HBA_ERROR;
 		retval = 1;
 	}
@@ -3278,6 +3305,9 @@ lpfc_sli_brdkill(struct lpfc_hba *phba)
 	if (retval != MBX_SUCCESS) {
 		if (retval != MBX_BUSY)
 			mempool_free(pmb, phba->mbox_mem_pool);
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2752 KILL_BOARD command failed retval %d\n",
+				retval);
 		spin_lock_irq(&phba->hbalock);
 		phba->link_flag &= ~LS_IGNORE_ERATT;
 		spin_unlock_irq(&phba->hbalock);
@@ -4035,7 +4065,7 @@ lpfc_sli_hba_setup(struct lpfc_hba *phba)
 
 lpfc_sli_hba_setup_error:
 	phba->link_state = LPFC_HBA_ERROR;
-	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+	lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 			"0445 Firmware initialization failed\n");
 	return rc;
 }
@@ -4388,7 +4418,13 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
 	spin_unlock_irq(&phba->hbalock);
 
 	/* Read the port's service parameters. */
-	lpfc_read_sparam(phba, mboxq, vport->vpi);
+	rc = lpfc_read_sparam(phba, mboxq, vport->vpi);
+	if (rc) {
+		phba->link_state = LPFC_HBA_ERROR;
+		rc = -ENOMEM;
+		goto out_free_vpd;
+	}
+
 	mboxq->vport = vport;
 	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
 	mp = (struct lpfc_dmabuf *) mboxq->context1;
@@ -4483,6 +4519,10 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
 	/* Post receive buffers to the device */
 	lpfc_sli4_rb_setup(phba);
 
+	/* Reset HBA FCF states after HBA reset */
+	phba->fcf.fcf_flag = 0;
+	phba->fcf.current_rec.flag = 0;
+
 	/* Start the ELS watchdog timer */
 	mod_timer(&vport->els_tmofunc,
 		  jiffies + HZ * (phba->fc_ratov * 2));
@@ -7436,6 +7476,7 @@ lpfc_sli_wake_iocb_wait(struct lpfc_hba *phba,
 {
 	wait_queue_head_t *pdone_q;
 	unsigned long iflags;
+	struct lpfc_scsi_buf *lpfc_cmd;
 
 	spin_lock_irqsave(&phba->hbalock, iflags);
 	cmdiocbq->iocb_flag |= LPFC_IO_WAKE;
@@ -7443,6 +7484,14 @@ lpfc_sli_wake_iocb_wait(struct lpfc_hba *phba,
 		memcpy(&((struct lpfc_iocbq *)cmdiocbq->context2)->iocb,
 		       &rspiocbq->iocb, sizeof(IOCB_t));
 
+	/* Set the exchange busy flag for task management commands */
+	if ((cmdiocbq->iocb_flag & LPFC_IO_FCP) &&
+		!(cmdiocbq->iocb_flag & LPFC_IO_LIBDFC)) {
+		lpfc_cmd = container_of(cmdiocbq, struct lpfc_scsi_buf,
+			cur_iocbq);
+		lpfc_cmd->exch_busy = rspiocbq->iocb_flag & LPFC_EXCHANGE_BUSY;
+	}
+
 	pdone_q = cmdiocbq->context_un.wait_queue;
 	if (pdone_q)
 		wake_up(pdone_q);
@@ -9061,6 +9110,12 @@ lpfc_sli4_fp_handle_fcp_wcqe(struct lpfc_hba *phba,
 	/* Fake the irspiocb and copy necessary response information */
 	lpfc_sli4_iocb_param_transfer(phba, &irspiocbq, cmdiocbq, wcqe);
 
+	if (cmdiocbq->iocb_flag & LPFC_DRIVER_ABORTED) {
+		spin_lock_irqsave(&phba->hbalock, iflags);
+		cmdiocbq->iocb_flag &= ~LPFC_DRIVER_ABORTED;
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+	}
+
 	/* Pass the cmd_iocb and the rsp state to the upper layer */
 	(cmdiocbq->iocb_cmpl)(phba, cmdiocbq, &irspiocbq);
 }
@@ -11941,15 +11996,19 @@ lpfc_sli4_build_dflt_fcf_record(struct lpfc_hba *phba,
 }
 
 /**
- * lpfc_sli4_read_fcf_record - Read the driver's default FCF Record.
+ * lpfc_sli4_fcf_scan_read_fcf_rec - Read hba fcf record for fcf scan.
  * @phba: pointer to lpfc hba data structure.
  * @fcf_index: FCF table entry offset.
  *
- * This routine is invoked to read up to @fcf_num of FCF record from the
- * device starting with the given @fcf_index.
+ * This routine is invoked to scan the entire FCF table by reading FCF
+ * record and processing it one at a time starting from the @fcf_index
+ * for initial FCF discovery or fast FCF failover rediscovery.
+ *
+ * Return 0 if the mailbox command is submitted sucessfully, none 0
+ * otherwise.
  **/
 int
-lpfc_sli4_read_fcf_record(struct lpfc_hba *phba, uint16_t fcf_index)
+lpfc_sli4_fcf_scan_read_fcf_rec(struct lpfc_hba *phba, uint16_t fcf_index)
 {
 	int rc = 0, error;
 	LPFC_MBOXQ_t *mboxq;
@@ -11961,17 +12020,17 @@ lpfc_sli4_read_fcf_record(struct lpfc_hba *phba, uint16_t fcf_index)
 				"2000 Failed to allocate mbox for "
 				"READ_FCF cmd\n");
 		error = -ENOMEM;
-		goto fail_fcfscan;
+		goto fail_fcf_scan;
 	}
 	/* Construct the read FCF record mailbox command */
-	rc = lpfc_sli4_mbx_read_fcf_record(phba, mboxq, fcf_index);
+	rc = lpfc_sli4_mbx_read_fcf_rec(phba, mboxq, fcf_index);
 	if (rc) {
 		error = -EINVAL;
-		goto fail_fcfscan;
+		goto fail_fcf_scan;
 	}
 	/* Issue the mailbox command asynchronously */
 	mboxq->vport = phba->pport;
-	mboxq->mbox_cmpl = lpfc_mbx_cmpl_read_fcf_record;
+	mboxq->mbox_cmpl = lpfc_mbx_cmpl_fcf_scan_read_fcf_rec;
 	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
 	if (rc == MBX_NOT_FINISHED)
 		error = -EIO;
@@ -11979,9 +12038,13 @@ lpfc_sli4_read_fcf_record(struct lpfc_hba *phba, uint16_t fcf_index)
 		spin_lock_irq(&phba->hbalock);
 		phba->hba_flag |= FCF_DISC_INPROGRESS;
 		spin_unlock_irq(&phba->hbalock);
+		/* Reset FCF round robin index bmask for new scan */
+		if (fcf_index == LPFC_FCOE_FCF_GET_FIRST)
+			memset(phba->fcf.fcf_rr_bmask, 0,
+			       sizeof(*phba->fcf.fcf_rr_bmask));
 		error = 0;
 	}
-fail_fcfscan:
+fail_fcf_scan:
 	if (error) {
 		if (mboxq)
 			lpfc_sli4_mbox_cmd_free(phba, mboxq);
@@ -11994,6 +12057,181 @@ fail_fcfscan:
 }
 
 /**
+ * lpfc_sli4_fcf_rr_read_fcf_rec - Read hba fcf record for round robin fcf.
+ * @phba: pointer to lpfc hba data structure.
+ * @fcf_index: FCF table entry offset.
+ *
+ * This routine is invoked to read an FCF record indicated by @fcf_index
+ * and to use it for FLOGI round robin FCF failover.
+ *
+ * Return 0 if the mailbox command is submitted sucessfully, none 0
+ * otherwise.
+ **/
+int
+lpfc_sli4_fcf_rr_read_fcf_rec(struct lpfc_hba *phba, uint16_t fcf_index)
+{
+	int rc = 0, error;
+	LPFC_MBOXQ_t *mboxq;
+
+	mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_FIP | LOG_INIT,
+				"2763 Failed to allocate mbox for "
+				"READ_FCF cmd\n");
+		error = -ENOMEM;
+		goto fail_fcf_read;
+	}
+	/* Construct the read FCF record mailbox command */
+	rc = lpfc_sli4_mbx_read_fcf_rec(phba, mboxq, fcf_index);
+	if (rc) {
+		error = -EINVAL;
+		goto fail_fcf_read;
+	}
+	/* Issue the mailbox command asynchronously */
+	mboxq->vport = phba->pport;
+	mboxq->mbox_cmpl = lpfc_mbx_cmpl_fcf_rr_read_fcf_rec;
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
+	if (rc == MBX_NOT_FINISHED)
+		error = -EIO;
+	else
+		error = 0;
+
+fail_fcf_read:
+	if (error && mboxq)
+		lpfc_sli4_mbox_cmd_free(phba, mboxq);
+	return error;
+}
+
+/**
+ * lpfc_sli4_read_fcf_rec - Read hba fcf record for update eligible fcf bmask.
+ * @phba: pointer to lpfc hba data structure.
+ * @fcf_index: FCF table entry offset.
+ *
+ * This routine is invoked to read an FCF record indicated by @fcf_index to
+ * determine whether it's eligible for FLOGI round robin failover list.
+ *
+ * Return 0 if the mailbox command is submitted sucessfully, none 0
+ * otherwise.
+ **/
+int
+lpfc_sli4_read_fcf_rec(struct lpfc_hba *phba, uint16_t fcf_index)
+{
+	int rc = 0, error;
+	LPFC_MBOXQ_t *mboxq;
+
+	mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_FIP | LOG_INIT,
+				"2758 Failed to allocate mbox for "
+				"READ_FCF cmd\n");
+				error = -ENOMEM;
+				goto fail_fcf_read;
+	}
+	/* Construct the read FCF record mailbox command */
+	rc = lpfc_sli4_mbx_read_fcf_rec(phba, mboxq, fcf_index);
+	if (rc) {
+		error = -EINVAL;
+		goto fail_fcf_read;
+	}
+	/* Issue the mailbox command asynchronously */
+	mboxq->vport = phba->pport;
+	mboxq->mbox_cmpl = lpfc_mbx_cmpl_read_fcf_rec;
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
+	if (rc == MBX_NOT_FINISHED)
+		error = -EIO;
+	else
+		error = 0;
+
+fail_fcf_read:
+	if (error && mboxq)
+		lpfc_sli4_mbox_cmd_free(phba, mboxq);
+	return error;
+}
+
+/**
+ * lpfc_sli4_fcf_rr_next_index_get - Get next eligible fcf record index
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is to get the next eligible FCF record index in a round
+ * robin fashion. If the next eligible FCF record index equals to the
+ * initial round robin FCF record index, LPFC_FCOE_FCF_NEXT_NONE (0xFFFF)
+ * shall be returned, otherwise, the next eligible FCF record's index
+ * shall be returned.
+ **/
+uint16_t
+lpfc_sli4_fcf_rr_next_index_get(struct lpfc_hba *phba)
+{
+	uint16_t next_fcf_index;
+
+	/* Search from the currently registered FCF index */
+	next_fcf_index = find_next_bit(phba->fcf.fcf_rr_bmask,
+				       LPFC_SLI4_FCF_TBL_INDX_MAX,
+				       phba->fcf.current_rec.fcf_indx);
+	/* Wrap around condition on phba->fcf.fcf_rr_bmask */
+	if (next_fcf_index >= LPFC_SLI4_FCF_TBL_INDX_MAX)
+		next_fcf_index = find_next_bit(phba->fcf.fcf_rr_bmask,
+					       LPFC_SLI4_FCF_TBL_INDX_MAX, 0);
+	/* Round robin failover stop condition */
+	if (next_fcf_index == phba->fcf.fcf_rr_init_indx)
+		return LPFC_FCOE_FCF_NEXT_NONE;
+
+	return next_fcf_index;
+}
+
+/**
+ * lpfc_sli4_fcf_rr_index_set - Set bmask with eligible fcf record index
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine sets the FCF record index in to the eligible bmask for
+ * round robin failover search. It checks to make sure that the index
+ * does not go beyond the range of the driver allocated bmask dimension
+ * before setting the bit.
+ *
+ * Returns 0 if the index bit successfully set, otherwise, it returns
+ * -EINVAL.
+ **/
+int
+lpfc_sli4_fcf_rr_index_set(struct lpfc_hba *phba, uint16_t fcf_index)
+{
+	if (fcf_index >= LPFC_SLI4_FCF_TBL_INDX_MAX) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_FIP,
+				"2610 HBA FCF index reached driver's "
+				"book keeping dimension: fcf_index:%d, "
+				"driver_bmask_max:%d\n",
+				fcf_index, LPFC_SLI4_FCF_TBL_INDX_MAX);
+		return -EINVAL;
+	}
+	/* Set the eligible FCF record index bmask */
+	set_bit(fcf_index, phba->fcf.fcf_rr_bmask);
+
+	return 0;
+}
+
+/**
+ * lpfc_sli4_fcf_rr_index_set - Clear bmask from eligible fcf record index
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine clears the FCF record index from the eligible bmask for
+ * round robin failover search. It checks to make sure that the index
+ * does not go beyond the range of the driver allocated bmask dimension
+ * before clearing the bit.
+ **/
+void
+lpfc_sli4_fcf_rr_index_clear(struct lpfc_hba *phba, uint16_t fcf_index)
+{
+	if (fcf_index >= LPFC_SLI4_FCF_TBL_INDX_MAX) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_FIP,
+				"2762 HBA FCF index goes beyond driver's "
+				"book keeping dimension: fcf_index:%d, "
+				"driver_bmask_max:%d\n",
+				fcf_index, LPFC_SLI4_FCF_TBL_INDX_MAX);
+		return;
+	}
+	/* Clear the eligible FCF record index bmask */
+	clear_bit(fcf_index, phba->fcf.fcf_rr_bmask);
+}
+
+/**
  * lpfc_mbx_cmpl_redisc_fcf_table - completion routine for rediscover FCF table
  * @phba: pointer to lpfc hba data structure.
  *
@@ -12014,21 +12252,40 @@ lpfc_mbx_cmpl_redisc_fcf_table(struct lpfc_hba *phba, LPFC_MBOXQ_t *mbox)
 	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
 			     &redisc_fcf->header.cfg_shdr.response);
 	if (shdr_status || shdr_add_status) {
-		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+		lpfc_printf_log(phba, KERN_ERR, LOG_FIP,
 				"2746 Requesting for FCF rediscovery failed "
 				"status x%x add_status x%x\n",
 				shdr_status, shdr_add_status);
-		/*
-		 * Request failed, last resort to re-try current
-		 * registered FCF entry
-		 */
-		lpfc_retry_pport_discovery(phba);
-	} else
+		if (phba->fcf.fcf_flag & FCF_ACVL_DISC) {
+			spin_lock_irq(&phba->hbalock);
+			phba->fcf.fcf_flag &= ~FCF_ACVL_DISC;
+			spin_unlock_irq(&phba->hbalock);
+			/*
+			 * CVL event triggered FCF rediscover request failed,
+			 * last resort to re-try current registered FCF entry.
+			 */
+			lpfc_retry_pport_discovery(phba);
+		} else {
+			spin_lock_irq(&phba->hbalock);
+			phba->fcf.fcf_flag &= ~FCF_DEAD_DISC;
+			spin_unlock_irq(&phba->hbalock);
+			/*
+			 * DEAD FCF event triggered FCF rediscover request
+			 * failed, last resort to fail over as a link down
+			 * to FCF registration.
+			 */
+			lpfc_sli4_fcf_dead_failthrough(phba);
+		}
+	} else {
+		lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
+				"2775 Start FCF rediscovery quiescent period "
+				"wait timer before scaning FCF table\n");
 		/*
 		 * Start FCF rediscovery wait timer for pending FCF
 		 * before rescan FCF record table.
 		 */
 		lpfc_fcf_redisc_wait_start_timer(phba);
+	}
 
 	mempool_free(mbox, phba->mbox_mem_pool);
 }
@@ -12047,6 +12304,9 @@ lpfc_sli4_redisc_fcf_table(struct lpfc_hba *phba)
 	struct lpfc_mbx_redisc_fcf_tbl *redisc_fcf;
 	int rc, length;
 
+	/* Cancel retry delay timers to all vports before FCF rediscover */
+	lpfc_cancel_all_vport_retry_delay_timer(phba);
+
 	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
 	if (!mbox) {
 		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
@@ -12078,6 +12338,31 @@ lpfc_sli4_redisc_fcf_table(struct lpfc_hba *phba)
 }
 
 /**
+ * lpfc_sli4_fcf_dead_failthrough - Failthrough routine to fcf dead event
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This function is the failover routine as a last resort to the FCF DEAD
+ * event when driver failed to perform fast FCF failover.
+ **/
+void
+lpfc_sli4_fcf_dead_failthrough(struct lpfc_hba *phba)
+{
+	uint32_t link_state;
+
+	/*
+	 * Last resort as FCF DEAD event failover will treat this as
+	 * a link down, but save the link state because we don't want
+	 * it to be changed to Link Down unless it is already down.
+	 */
+	link_state = phba->link_state;
+	lpfc_linkdown(phba);
+	phba->link_state = link_state;
+
+	/* Unregister FCF if no devices connected to it */
+	lpfc_unregister_unused_fcf(phba);
+}
+
+/**
  * lpfc_sli_read_link_ste - Read region 23 to decide if link is disabled.
  * @phba: pointer to lpfc hba data structure.
  *
diff --git a/drivers/scsi/lpfc/lpfc_sli.h b/drivers/scsi/lpfc/lpfc_sli.h
index dfcf5437d1f5..b4a639c47616 100644
--- a/drivers/scsi/lpfc/lpfc_sli.h
+++ b/drivers/scsi/lpfc/lpfc_sli.h
@@ -62,6 +62,7 @@ struct lpfc_iocbq {
 #define LPFC_DELAY_MEM_FREE	0x20    /* Defer free'ing of FC data */
 #define LPFC_EXCHANGE_BUSY	0x40    /* SLI4 hba reported XB in response */
 #define LPFC_USE_FCPWQIDX	0x80    /* Submit to specified FCPWQ index */
+#define DSS_SECURITY_OP		0x100	/* security IO */
 
 #define LPFC_FIP_ELS_ID_MASK	0xc000	/* ELS_ID range 0-3, non-shifted mask */
 #define LPFC_FIP_ELS_ID_SHIFT	14
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
index 86308836600f..4a35e7b9bc5b 100644
--- a/drivers/scsi/lpfc/lpfc_sli4.h
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -153,15 +153,27 @@ struct lpfc_fcf {
 #define FCF_REGISTERED	0x02 /* FCF registered with FW */
 #define FCF_SCAN_DONE	0x04 /* FCF table scan done */
 #define FCF_IN_USE	0x08 /* Atleast one discovery completed */
-#define FCF_REDISC_PEND	0x10 /* FCF rediscovery pending */
-#define FCF_REDISC_EVT	0x20 /* FCF rediscovery event to worker thread */
-#define FCF_REDISC_FOV	0x40 /* Post FCF rediscovery fast failover */
+#define FCF_INIT_DISC	0x10 /* Initial FCF discovery */
+#define FCF_DEAD_DISC	0x20 /* FCF DEAD fast FCF failover discovery */
+#define FCF_ACVL_DISC	0x40 /* All CVL fast FCF failover discovery */
+#define FCF_DISCOVERY	(FCF_INIT_DISC | FCF_DEAD_DISC | FCF_ACVL_DISC)
+#define FCF_REDISC_PEND	0x80 /* FCF rediscovery pending */
+#define FCF_REDISC_EVT	0x100 /* FCF rediscovery event to worker thread */
+#define FCF_REDISC_FOV	0x200 /* Post FCF rediscovery fast failover */
 	uint32_t addr_mode;
+	uint16_t fcf_rr_init_indx;
 	struct lpfc_fcf_rec current_rec;
 	struct lpfc_fcf_rec failover_rec;
 	struct timer_list redisc_wait;
+	unsigned long *fcf_rr_bmask; /* Eligible FCF indexes for RR failover */
 };
 
+/*
+ * Maximum FCF table index, it is for driver internal book keeping, it
+ * just needs to be no less than the supported HBA's FCF table size.
+ */
+#define LPFC_SLI4_FCF_TBL_INDX_MAX	32
+
 #define LPFC_REGION23_SIGNATURE "RG23"
 #define LPFC_REGION23_VERSION	1
 #define LPFC_REGION23_LAST_REC  0xff
@@ -431,11 +443,18 @@ enum lpfc_sge_type {
 	SCSI_BUFF_TYPE
 };
 
+enum lpfc_sgl_state {
+	SGL_FREED,
+	SGL_ALLOCATED,
+	SGL_XRI_ABORTED
+};
+
 struct lpfc_sglq {
 	/* lpfc_sglqs are used in double linked lists */
 	struct list_head list;
 	struct list_head clist;
 	enum lpfc_sge_type buff_type; /* is this a scsi sgl */
+	enum lpfc_sgl_state state;
 	uint16_t iotag;         /* pre-assigned IO tag */
 	uint16_t sli4_xritag;   /* pre-assigned XRI, (OXID) tag. */
 	struct sli4_sge *sgl;	/* pre-assigned SGL */
@@ -463,8 +482,8 @@ void lpfc_sli4_mbox_cmd_free(struct lpfc_hba *, struct lpfcMboxq *);
 void lpfc_sli4_mbx_sge_set(struct lpfcMboxq *, uint32_t, dma_addr_t, uint32_t);
 void lpfc_sli4_mbx_sge_get(struct lpfcMboxq *, uint32_t,
 			   struct lpfc_mbx_sge *);
-int lpfc_sli4_mbx_read_fcf_record(struct lpfc_hba *, struct lpfcMboxq *,
-				  uint16_t);
+int lpfc_sli4_mbx_read_fcf_rec(struct lpfc_hba *, struct lpfcMboxq *,
+			       uint16_t);
 
 void lpfc_sli4_hba_reset(struct lpfc_hba *);
 struct lpfc_queue *lpfc_sli4_queue_alloc(struct lpfc_hba *, uint32_t,
@@ -523,8 +542,13 @@ int lpfc_sli4_init_vpi(struct lpfc_hba *, uint16_t);
 uint32_t lpfc_sli4_cq_release(struct lpfc_queue *, bool);
 uint32_t lpfc_sli4_eq_release(struct lpfc_queue *, bool);
 void lpfc_sli4_fcfi_unreg(struct lpfc_hba *, uint16_t);
-int lpfc_sli4_read_fcf_record(struct lpfc_hba *, uint16_t);
-void lpfc_mbx_cmpl_read_fcf_record(struct lpfc_hba *, LPFC_MBOXQ_t *);
+int lpfc_sli4_fcf_scan_read_fcf_rec(struct lpfc_hba *, uint16_t);
+int lpfc_sli4_fcf_rr_read_fcf_rec(struct lpfc_hba *, uint16_t);
+int lpfc_sli4_read_fcf_rec(struct lpfc_hba *, uint16_t);
+void lpfc_mbx_cmpl_fcf_scan_read_fcf_rec(struct lpfc_hba *, LPFC_MBOXQ_t *);
+void lpfc_mbx_cmpl_fcf_rr_read_fcf_rec(struct lpfc_hba *, LPFC_MBOXQ_t *);
+void lpfc_mbx_cmpl_read_fcf_rec(struct lpfc_hba *, LPFC_MBOXQ_t *);
+int lpfc_sli4_unregister_fcf(struct lpfc_hba *);
 int lpfc_sli4_post_status_check(struct lpfc_hba *);
 uint8_t lpfc_sli4_mbox_opcode_get(struct lpfc_hba *, struct lpfcMboxq *);
 
diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h
index ac276aa46fba..013deec5dae8 100644
--- a/drivers/scsi/lpfc/lpfc_version.h
+++ b/drivers/scsi/lpfc/lpfc_version.h
@@ -18,7 +18,7 @@
  * included with this package.                                     *
  *******************************************************************/
 
-#define LPFC_DRIVER_VERSION "8.3.9"
+#define LPFC_DRIVER_VERSION "8.3.10"
 #define LPFC_DRIVER_NAME		"lpfc"
 #define LPFC_SP_DRIVER_HANDLER_NAME	"lpfc:sp"
 #define LPFC_FP_DRIVER_HANDLER_NAME	"lpfc:fp"
diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c
index dc86e873102a..869f76cbc58a 100644
--- a/drivers/scsi/lpfc/lpfc_vport.c
+++ b/drivers/scsi/lpfc/lpfc_vport.c
@@ -123,7 +123,12 @@ lpfc_vport_sparm(struct lpfc_hba *phba, struct lpfc_vport *vport)
 	}
 	mb = &pmb->u.mb;
 
-	lpfc_read_sparam(phba, pmb, vport->vpi);
+	rc = lpfc_read_sparam(phba, pmb, vport->vpi);
+	if (rc) {
+		mempool_free(pmb, phba->mbox_mem_pool);
+		return -ENOMEM;
+	}
+
 	/*
 	 * Grab buffer pointer and clear context1 so we can use
 	 * lpfc_sli_issue_box_wait
diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c
index 24223473f573..60de85091502 100644
--- a/drivers/scsi/osd/osd_initiator.c
+++ b/drivers/scsi/osd/osd_initiator.c
@@ -1433,6 +1433,10 @@ int osd_finalize_request(struct osd_request *or,
 	cdbh->command_specific_options |= or->attributes_mode;
 	if (or->attributes_mode == OSD_CDB_GET_ATTR_PAGE_SET_ONE) {
 		ret = _osd_req_finalize_attr_page(or);
+		if (ret) {
+			OSD_DEBUG("_osd_req_finalize_attr_page failed\n");
+			return ret;
+		}
 	} else {
 		/* TODO: I think that for the GET_ATTR command these 2 should
 		 * be reversed to keep them in execution order (for embeded
diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c
index c2341af587a3..021246454872 100644
--- a/drivers/scsi/pcmcia/nsp_cs.c
+++ b/drivers/scsi/pcmcia/nsp_cs.c
@@ -1717,6 +1717,7 @@ static int nsp_cs_config(struct pcmcia_device *link)
 	cfg_mem->data = data;
 
 	ret = pcmcia_loop_config(link, nsp_cs_config_check, cfg_mem);
+	if (ret)
 		goto cs_failed;
 
 	if (link->conf.Attributes & CONF_ENABLE_IRQ) {
diff --git a/drivers/scsi/pcmcia/nsp_cs.h b/drivers/scsi/pcmcia/nsp_cs.h
index 7db28cd49446..8c61a4fe1db9 100644
--- a/drivers/scsi/pcmcia/nsp_cs.h
+++ b/drivers/scsi/pcmcia/nsp_cs.h
@@ -187,7 +187,7 @@
 #define S_IO		BIT(1)    /* Input/Output line from SCSI bus */
 #define S_CD		BIT(2)    /* Command/Data line from SCSI bus */
 #define S_BUSY		BIT(3)    /* Busy line from SCSI bus         */
-#define S_ACK		BIT(4)    /* Acknowlege line from SCSI bus   */
+#define S_ACK		BIT(4)    /* Acknowledge line from SCSI bus  */
 #define S_REQUEST	BIT(5)    /* Request line from SCSI bus      */
 #define S_SELECT	BIT(6)	  /*                                 */
 #define S_ATN		BIT(7)	  /*                                 */
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 9b44c6f1b10e..7985ae45d688 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -2924,7 +2924,7 @@ hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		break;
 	default:
 		PM8001_MSG_DBG(pm8001_ha,
-			pm8001_printk("unkown device type(%x)\n", deviceType));
+			pm8001_printk("unknown device type(%x)\n", deviceType));
 		break;
 	}
 	phy->phy_type |= PORT_TYPE_SAS;
diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
index 7f9c83a76390..3b2c98fba834 100644
--- a/drivers/scsi/pm8001/pm8001_sas.c
+++ b/drivers/scsi/pm8001/pm8001_sas.c
@@ -600,7 +600,7 @@ static void pm8001_free_dev(struct pm8001_device *pm8001_dev)
   * by the command "OPC_INB_REG_DEV", after that the HBA will assign a
   * device ID(according to device's sas address) and returned it to LLDD. From
   * now on, we communicate with HBA FW with the device ID which HBA assigned
-  * rather than sas address. it is the neccessary step for our HBA but it is
+  * rather than sas address. it is the necessary step for our HBA but it is
   * the optional for other HBA driver.
   */
 static int pm8001_dev_found_notify(struct domain_device *dev)
diff --git a/drivers/scsi/pmcraid.h b/drivers/scsi/pmcraid.h
index 92f89d50850c..b8ad07c3449e 100644
--- a/drivers/scsi/pmcraid.h
+++ b/drivers/scsi/pmcraid.h
@@ -938,7 +938,7 @@ static struct pmcraid_ioasc_error pmcraid_ioasc_error_table[] = {
 
 /*
  * pmcraid_ioctl_header - definition of header structure that preceeds all the
- * buffers given as ioctl arguements.
+ * buffers given as ioctl arguments.
  *
  * .signature           : always ASCII string, "PMCRAID"
  * .reserved            : not used
diff --git a/drivers/scsi/qlogicpti.c b/drivers/scsi/qlogicpti.c
index fa34b92850a6..1b8217076b0e 100644
--- a/drivers/scsi/qlogicpti.c
+++ b/drivers/scsi/qlogicpti.c
@@ -738,7 +738,7 @@ static int __devinit qpti_register_irq(struct qlogicpti *qpti)
 	 * sanely maintain.
 	 */
 	if (request_irq(qpti->irq, qpti_intr,
-			IRQF_SHARED, "Qlogic/PTI", qpti))
+			IRQF_SHARED, "QlogicPTI", qpti))
 		goto fail;
 
 	printk("qlogicpti%d: IRQ %d ", qpti->qpti_id, qpti->irq);
diff --git a/drivers/scsi/raid_class.c b/drivers/scsi/raid_class.c
index bd88349b8526..2c146b44d95f 100644
--- a/drivers/scsi/raid_class.c
+++ b/drivers/scsi/raid_class.c
@@ -63,6 +63,7 @@ static int raid_match(struct attribute_container *cont, struct device *dev)
 	 * emulated RAID devices, so start with SCSI */
 	struct raid_internal *i = ac_to_raid_internal(cont);
 
+#if defined(CONFIG_SCSI) || defined(CONFIG_SCSI_MODULE)
 	if (scsi_is_sdev_device(dev)) {
 		struct scsi_device *sdev = to_scsi_device(dev);
 
@@ -71,6 +72,7 @@ static int raid_match(struct attribute_container *cont, struct device *dev)
 
 		return i->f->is_raid(dev);
 	}
+#endif
 	/* FIXME: look at other subsystems too */
 	return 0;
 }
diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c
index 79660ee3e211..1d5b72173dd8 100644
--- a/drivers/scsi/scsi_transport_fc.c
+++ b/drivers/scsi/scsi_transport_fc.c
@@ -1232,6 +1232,15 @@ store_fc_vport_delete(struct device *dev, struct device_attribute *attr,
 {
 	struct fc_vport *vport = transport_class_to_vport(dev);
 	struct Scsi_Host *shost = vport_to_shost(vport);
+	unsigned long flags;
+
+	spin_lock_irqsave(shost->host_lock, flags);
+	if (vport->flags & (FC_VPORT_DEL | FC_VPORT_CREATING)) {
+		spin_unlock_irqrestore(shost->host_lock, flags);
+		return -EBUSY;
+	}
+	vport->flags |= FC_VPORT_DELETING;
+	spin_unlock_irqrestore(shost->host_lock, flags);
 
 	fc_queue_work(shost, &vport->vport_delete_work);
 	return count;
@@ -1821,6 +1830,9 @@ store_fc_host_vport_delete(struct device *dev, struct device_attribute *attr,
 	list_for_each_entry(vport, &fc_host->vports, peers) {
 		if ((vport->channel == 0) &&
 		    (vport->port_name == wwpn) && (vport->node_name == wwnn)) {
+			if (vport->flags & (FC_VPORT_DEL | FC_VPORT_CREATING))
+				break;
+			vport->flags |= FC_VPORT_DELETING;
 			match = 1;
 			break;
 		}
@@ -3370,18 +3382,6 @@ fc_vport_terminate(struct fc_vport *vport)
 	unsigned long flags;
 	int stat;
 
-	spin_lock_irqsave(shost->host_lock, flags);
-	if (vport->flags & FC_VPORT_CREATING) {
-		spin_unlock_irqrestore(shost->host_lock, flags);
-		return -EBUSY;
-	}
-	if (vport->flags & (FC_VPORT_DEL)) {
-		spin_unlock_irqrestore(shost->host_lock, flags);
-		return -EALREADY;
-	}
-	vport->flags |= FC_VPORT_DELETING;
-	spin_unlock_irqrestore(shost->host_lock, flags);
-
 	if (i->f->vport_delete)
 		stat = i->f->vport_delete(vport);
 	else
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 1dd4d8407694..7b75c8a2a49d 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1948,7 +1948,7 @@ static void sd_read_block_limits(struct scsi_disk *sdkp)
 {
 	struct request_queue *q = sdkp->disk->queue;
 	unsigned int sector_sz = sdkp->device->sector_size;
-	const int vpd_len = 32;
+	const int vpd_len = 64;
 	unsigned char *buffer = kmalloc(vpd_len, GFP_KERNEL);
 
 	if (!buffer ||
@@ -1998,7 +1998,7 @@ static void sd_read_block_characteristics(struct scsi_disk *sdkp)
 {
 	unsigned char *buffer;
 	u16 rot;
-	const int vpd_len = 32;
+	const int vpd_len = 64;
 
 	buffer = kmalloc(vpd_len, GFP_KERNEL);
 
@@ -2111,7 +2111,7 @@ static int sd_revalidate_disk(struct gendisk *disk)
  *	which is followed by sdaaa.
  *
  *	This is basically 26 base counting with one extra 'nil' entry
- *	at the beggining from the second digit on and can be
+ *	at the beginning from the second digit on and can be
  *	determined using similar method as 26 base conversion with the
  *	index shifted -1 after each digit is computed.
  *
diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c
index 1d7a8780e00c..0d9d6f7567f5 100644
--- a/drivers/scsi/ses.c
+++ b/drivers/scsi/ses.c
@@ -595,8 +595,6 @@ static int ses_intf_add(struct device *cdev,
 		ses_dev->page10_len = len;
 		buf = NULL;
 	}
-	kfree(hdr_buf);
-
 	scomp = kzalloc(sizeof(struct ses_component) * components, GFP_KERNEL);
 	if (!scomp)
 		goto err_free;
@@ -608,6 +606,8 @@ static int ses_intf_add(struct device *cdev,
 		goto err_free;
 	}
 
+	kfree(hdr_buf);
+
 	edev->scratch = ses_dev;
 	for (i = 0; i < components; i++)
 		edev->component[i].scratch = scomp + i;
diff --git a/drivers/scsi/sgiwd93.c b/drivers/scsi/sgiwd93.c
index 0807b260268b..fef0e3c75b16 100644
--- a/drivers/scsi/sgiwd93.c
+++ b/drivers/scsi/sgiwd93.c
@@ -226,7 +226,7 @@ static struct scsi_host_template sgiwd93_template = {
 	.use_clustering		= DISABLE_CLUSTERING,
 };
 
-static int __init sgiwd93_probe(struct platform_device *pdev)
+static int __devinit sgiwd93_probe(struct platform_device *pdev)
 {
 	struct sgiwd93_platform_data *pd = pdev->dev.platform_data;
 	unsigned char *wdregs = pd->wdregs;
diff --git a/drivers/scsi/sni_53c710.c b/drivers/scsi/sni_53c710.c
index 37b3359e863e..56cf0bb4ed1f 100644
--- a/drivers/scsi/sni_53c710.c
+++ b/drivers/scsi/sni_53c710.c
@@ -64,7 +64,7 @@ static struct scsi_host_template snirm710_template = {
 	.module		= THIS_MODULE,
 };
 
-static int __init snirm710_probe(struct platform_device *dev)
+static int __devinit snirm710_probe(struct platform_device *dev)
 {
 	unsigned long base;
 	struct NCR_700_Host_Parameters *hostdata;
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 7c4ebe6ee18b..c3db16b7afa1 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -2408,6 +2408,21 @@ serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
 }
 
 static void
+serial8250_set_ldisc(struct uart_port *port)
+{
+	int line = port->line;
+
+	if (line >= port->state->port.tty->driver->num)
+		return;
+
+	if (port->state->port.tty->ldisc->ops->num == N_PPS) {
+		port->flags |= UPF_HARDPPS_CD;
+		serial8250_enable_ms(port);
+	} else
+		port->flags &= ~UPF_HARDPPS_CD;
+}
+
+static void
 serial8250_pm(struct uart_port *port, unsigned int state,
 	      unsigned int oldstate)
 {
@@ -2628,6 +2643,7 @@ static struct uart_ops serial8250_pops = {
 	.startup	= serial8250_startup,
 	.shutdown	= serial8250_shutdown,
 	.set_termios	= serial8250_set_termios,
+	.set_ldisc	= serial8250_set_ldisc,
 	.pm		= serial8250_pm,
 	.type		= serial8250_type,
 	.release_port	= serial8250_release_port,
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index d6ff73395623..f55c49475a8c 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -447,7 +447,7 @@ config SERIAL_CLPS711X_CONSOLE
 
 config SERIAL_SAMSUNG
 	tristate "Samsung SoC serial support"
-	depends on ARM && PLAT_S3C
+	depends on ARM && PLAT_SAMSUNG
 	select SERIAL_CORE
 	help
 	  Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
@@ -455,11 +455,18 @@ config SERIAL_SAMSUNG
 	  provide all of these ports, depending on how the serial port
 	  pins are configured.
 
+config SERIAL_SAMSUNG_UARTS_4
+	bool
+	depends on ARM && PLAT_SAMSUNG
+	default y if CPU_S3C2443
+	help
+	  Internal node for the common case of 4 Samsung compatible UARTs
+
 config SERIAL_SAMSUNG_UARTS
 	int
-	depends on ARM && PLAT_S3C
+	depends on ARM && PLAT_SAMSUNG
 	default 2 if ARCH_S3C2400
-	default 4 if ARCH_S5PC1XX || ARCH_S3C64XX || CPU_S3C2443
+	default 4 if SERIAL_SAMSUNG_UARTS_4
 	default 3
 	help
 	  Select the number of available UART ports for the Samsung S3C
@@ -526,20 +533,30 @@ config SERIAL_S3C24A0
 	  Serial port support for the Samsung S3C24A0 SoC
 
 config SERIAL_S3C6400
-	tristate "Samsung S3C6400/S3C6410 Serial port support"
-	depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410)
+	tristate "Samsung S3C6400/S3C6410/S5P6440 Seria port support"
+	depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440)
+	select SERIAL_SAMSUNG_UARTS_4
 	default y
 	help
-	  Serial port support for the Samsung S3C6400 and S3C6410
+	  Serial port support for the Samsung S3C6400, S3C6410 and S5P6440
 	  SoCs
 
 config SERIAL_S5PC100
 	tristate "Samsung S5PC100 Serial port support"
 	depends on SERIAL_SAMSUNG && CPU_S5PC100
+	select SERIAL_SAMSUNG_UARTS_4
 	default y
 	help
 	  Serial port support for the Samsung S5PC100 SoCs
 
+config SERIAL_S5PV210
+	tristate "Samsung S5PV210 Serial port support"
+	depends on SERIAL_SAMSUNG && (CPU_S5PV210 || CPU_S5P6442)
+	select SERIAL_SAMSUNG_UARTS_4 if CPU_S5PV210
+	default y
+	help
+	  Serial port support for Samsung's S5P Family of SoC's
+
 config SERIAL_MAX3100
 	tristate "MAX3100 support"
 	depends on SPI
@@ -996,7 +1013,7 @@ config SERIAL_IP22_ZILOG_CONSOLE
 
 config SERIAL_SH_SCI
 	tristate "SuperH SCI(F) serial port support"
-	depends on HAVE_CLK && (SUPERH || H8300)
+	depends on HAVE_CLK && (SUPERH || H8300 || ARCH_SHMOBILE)
 	select SERIAL_CORE
 
 config SERIAL_SH_SCI_NR_UARTS
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 5548fe7df61d..6aa4723b74ee 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -45,6 +45,7 @@ obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o
 obj-$(CONFIG_SERIAL_S3C24A0) += s3c24a0.o
 obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o
 obj-$(CONFIG_SERIAL_S5PC100) += s3c6400.o
+obj-$(CONFIG_SERIAL_S5PV210) += s5pv210.o
 obj-$(CONFIG_SERIAL_MAX3100) += max3100.o
 obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
 obj-$(CONFIG_SERIAL_MUX) += mux.o
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index 429a8ae86933..e4b3c2c88bb6 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -471,6 +471,20 @@ pl010_set_termios(struct uart_port *port, struct ktermios *termios,
 	spin_unlock_irqrestore(&uap->port.lock, flags);
 }
 
+static void pl010_set_ldisc(struct uart_port *port)
+{
+	int line = port->line;
+
+	if (line >= port->state->port.tty->driver->num)
+		return;
+
+	if (port->state->port.tty->ldisc->ops->num == N_PPS) {
+		port->flags |= UPF_HARDPPS_CD;
+		pl010_enable_ms(port);
+	} else
+		port->flags &= ~UPF_HARDPPS_CD;
+}
+
 static const char *pl010_type(struct uart_port *port)
 {
 	return port->type == PORT_AMBA ? "AMBA" : NULL;
@@ -531,6 +545,7 @@ static struct uart_ops amba_pl010_pops = {
 	.startup	= pl010_startup,
 	.shutdown	= pl010_shutdown,
 	.set_termios	= pl010_set_termios,
+	.set_ldisc	= pl010_set_ldisc,
 	.type		= pl010_type,
 	.release_port	= pl010_release_port,
 	.request_port	= pl010_request_port,
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
index a9802e76b5fa..722eac18f382 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
@@ -61,7 +61,7 @@ void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port,
 	void __iomem *pram;
 	unsigned long offset;
 	struct resource res;
-	unsigned long len;
+	resource_size_t len;
 
 	/* Don't remap parameter RAM if it has already been initialized
 	 * during console setup.
@@ -74,7 +74,7 @@ void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port,
 	if (of_address_to_resource(np, 1, &res))
 		return NULL;
 
-	len = 1 + res.end - res.start;
+	len = resource_size(&res);
 	pram = ioremap(res.start, len);
 	if (!pram)
 		return NULL;
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index d00fcf8e6c70..e579d7a1807a 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -440,7 +440,7 @@ static irqreturn_t imx_rxint(int irq, void *dev_id)
 
 		temp = readl(sport->port.membase + USR2);
 		if (temp & USR2_BRCD) {
-			writel(temp | USR2_BRCD, sport->port.membase + USR2);
+			writel(USR2_BRCD, sport->port.membase + USR2);
 			if (uart_handle_break(&sport->port))
 				continue;
 		}
diff --git a/drivers/serial/s3c2412.c b/drivers/serial/s3c2412.c
index ce75e28e36ef..1700b1a2fb7e 100644
--- a/drivers/serial/s3c2412.c
+++ b/drivers/serial/s3c2412.c
@@ -102,6 +102,7 @@ static struct s3c24xx_uart_info s3c2412_uart_inf = {
 	.name		= "Samsung S3C2412 UART",
 	.type		= PORT_S3C2412,
 	.fifosize	= 64,
+	.has_divslot	= 1,
 	.rx_fifomask	= S3C2440_UFSTAT_RXMASK,
 	.rx_fifoshift	= S3C2440_UFSTAT_RXSHIFT,
 	.rx_fifofull	= S3C2440_UFSTAT_RXFULL,
diff --git a/drivers/serial/s5pv210.c b/drivers/serial/s5pv210.c
new file mode 100644
index 000000000000..8dc03837617b
--- /dev/null
+++ b/drivers/serial/s5pv210.c
@@ -0,0 +1,154 @@
+/* linux/drivers/serial/s5pv210.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Based on drivers/serial/s3c6400.c
+ *
+ * Driver for Samsung S5PV210 SoC UARTs.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+
+#include <asm/irq.h>
+#include <mach/hardware.h>
+#include <plat/regs-serial.h>
+#include "samsung.h"
+
+static int s5pv210_serial_setsource(struct uart_port *port,
+					struct s3c24xx_uart_clksrc *clk)
+{
+	unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+	if (strcmp(clk->name, "pclk") == 0)
+		ucon &= ~S5PV210_UCON_CLKMASK;
+	else if (strcmp(clk->name, "uclk1") == 0)
+		ucon |= S5PV210_UCON_CLKMASK;
+	else {
+		printk(KERN_ERR "unknown clock source %s\n", clk->name);
+		return -EINVAL;
+	}
+
+	wr_regl(port, S3C2410_UCON, ucon);
+	return 0;
+}
+
+
+static int s5pv210_serial_getsource(struct uart_port *port,
+					struct s3c24xx_uart_clksrc *clk)
+{
+	u32 ucon = rd_regl(port, S3C2410_UCON);
+
+	clk->divisor = 1;
+
+	switch (ucon & S5PV210_UCON_CLKMASK) {
+	case S5PV210_UCON_PCLK:
+		clk->name = "pclk";
+		break;
+	case S5PV210_UCON_UCLK:
+		clk->name = "uclk1";
+		break;
+	}
+
+	return 0;
+}
+
+static int s5pv210_serial_resetport(struct uart_port *port,
+					struct s3c2410_uartcfg *cfg)
+{
+	unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+	ucon &= S5PV210_UCON_CLKMASK;
+	wr_regl(port, S3C2410_UCON,  ucon | cfg->ucon);
+	wr_regl(port, S3C2410_ULCON, cfg->ulcon);
+
+	/* reset both fifos */
+	wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
+	wr_regl(port, S3C2410_UFCON, cfg->ufcon);
+
+	return 0;
+}
+
+#define S5PV210_UART_DEFAULT_INFO(fifo_size)			\
+		.name		= "Samsung S5PV210 UART0",	\
+		.type		= PORT_S3C6400,			\
+		.fifosize	= fifo_size,			\
+		.has_divslot	= 1,				\
+		.rx_fifomask	= S5PV210_UFSTAT_RXMASK,	\
+		.rx_fifoshift	= S5PV210_UFSTAT_RXSHIFT,	\
+		.rx_fifofull	= S5PV210_UFSTAT_RXFULL,	\
+		.tx_fifofull	= S5PV210_UFSTAT_TXFULL,	\
+		.tx_fifomask	= S5PV210_UFSTAT_TXMASK,	\
+		.tx_fifoshift	= S5PV210_UFSTAT_TXSHIFT,	\
+		.get_clksrc	= s5pv210_serial_getsource,	\
+		.set_clksrc	= s5pv210_serial_setsource,	\
+		.reset_port	= s5pv210_serial_resetport
+
+static struct s3c24xx_uart_info s5p_port_fifo256 = {
+	S5PV210_UART_DEFAULT_INFO(256),
+};
+
+static struct s3c24xx_uart_info s5p_port_fifo64 = {
+	S5PV210_UART_DEFAULT_INFO(64),
+};
+
+static struct s3c24xx_uart_info s5p_port_fifo16 = {
+	S5PV210_UART_DEFAULT_INFO(16),
+};
+
+static struct s3c24xx_uart_info *s5p_uart_inf[] = {
+	[0] = &s5p_port_fifo256,
+	[1] = &s5p_port_fifo64,
+	[2] = &s5p_port_fifo16,
+	[3] = &s5p_port_fifo16,
+};
+
+/* device management */
+static int s5p_serial_probe(struct platform_device *pdev)
+{
+	return s3c24xx_serial_probe(pdev, s5p_uart_inf[pdev->id]);
+}
+
+static struct platform_driver s5p_serial_drv = {
+	.probe		= s5p_serial_probe,
+	.remove		= __devexit_p(s3c24xx_serial_remove),
+	.driver		= {
+		.name	= "s5pv210-uart",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init s5pv210_serial_console_init(void)
+{
+	return s3c24xx_serial_initconsole(&s5p_serial_drv, s5p_uart_inf);
+}
+
+console_initcall(s5pv210_serial_console_init);
+
+static int __init s5p_serial_init(void)
+{
+	return s3c24xx_serial_init(&s5p_serial_drv, *s5p_uart_inf);
+}
+
+static void __exit s5p_serial_exit(void)
+{
+	platform_driver_unregister(&s5p_serial_drv);
+}
+
+module_init(s5p_serial_init);
+module_exit(s5p_serial_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:s5pv210-uart");
+MODULE_DESCRIPTION("Samsung S5PV210 UART Driver support");
+MODULE_AUTHOR("Thomas Abraham <thomas.ab@samsung.com>");
diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index 52e3df113ec0..a9d6c5626a0a 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -1271,7 +1271,7 @@ s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon)
 	unsigned long ufstat, utrstat;
 
 	if (ufcon & S3C2410_UFCON_FIFOMODE) {
-		/* fifo mode - check ammount of data in fifo registers... */
+		/* fifo mode - check amount of data in fifo registers... */
 
 		ufstat = rd_regl(port, S3C2410_UFSTAT);
 		return (ufstat & info->tx_fifofull) ? 0 : 1;
@@ -1374,7 +1374,7 @@ s3c24xx_serial_get_options(struct uart_port *port, int *baud,
  * data.
 */
 
-static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info *info)
+static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info **info)
 {
 	struct s3c24xx_uart_port *ptr = s3c24xx_serial_ports;
 	struct platform_device **platdev_ptr;
@@ -1385,7 +1385,7 @@ static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info *info)
 	platdev_ptr = s3c24xx_uart_devs;
 
 	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++, ptr++, platdev_ptr++) {
-		s3c24xx_serial_init_port(ptr, info, *platdev_ptr);
+		s3c24xx_serial_init_port(ptr, info[i], *platdev_ptr);
 	}
 
 	return 0;
@@ -1451,7 +1451,7 @@ static struct console s3c24xx_serial_console = {
 };
 
 int s3c24xx_serial_initconsole(struct platform_driver *drv,
-			       struct s3c24xx_uart_info *info)
+			       struct s3c24xx_uart_info **info)
 
 {
 	struct platform_device *dev = s3c24xx_uart_devs[0];
diff --git a/drivers/serial/samsung.h b/drivers/serial/samsung.h
index 1fb22343df42..0ac06a07d25f 100644
--- a/drivers/serial/samsung.h
+++ b/drivers/serial/samsung.h
@@ -75,19 +75,24 @@ extern int s3c24xx_serial_probe(struct platform_device *dev,
 extern int __devexit s3c24xx_serial_remove(struct platform_device *dev);
 
 extern int s3c24xx_serial_initconsole(struct platform_driver *drv,
-				      struct s3c24xx_uart_info *uart);
+				      struct s3c24xx_uart_info **uart);
 
 extern int s3c24xx_serial_init(struct platform_driver *drv,
 			       struct s3c24xx_uart_info *info);
 
 #ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE
 
-#define s3c24xx_console_init(__drv, __inf)			\
-static int __init s3c_serial_console_init(void)			\
-{								\
-	return s3c24xx_serial_initconsole(__drv, __inf);	\
-}								\
-								\
+#define s3c24xx_console_init(__drv, __inf)				\
+static int __init s3c_serial_console_init(void)				\
+{									\
+	struct s3c24xx_uart_info *uinfo[CONFIG_SERIAL_SAMSUNG_UARTS];	\
+	int i;								\
+									\
+	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)		\
+		uinfo[i] = __inf;					\
+	return s3c24xx_serial_initconsole(__drv, uinfo);		\
+}									\
+									\
 console_initcall(s3c_serial_console_init)
 
 #else
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index f7d2589926d2..fad67d33b0bd 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -30,7 +30,8 @@
  */
 # define SCSCR_INIT(port) (port->mapbase == SCIF2) ? 0xF3 : 0xF0
 #elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \
-      defined(CONFIG_CPU_SUBTYPE_SH7721)
+      defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+      defined(CONFIG_ARCH_SHMOBILE)
 # define SCSCR_INIT(port)  0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */
 # define PORT_PTCR	   0xA405011EUL
 # define PORT_PVCR	   0xA4050122UL
@@ -228,7 +229,8 @@
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
     defined(CONFIG_CPU_SUBTYPE_SH7720) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7721)
+    defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+    defined(CONFIG_ARCH_SHMOBILE)
 # define SCIF_ORER    0x0200
 # define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK | SCIF_ORER)
 # define SCIF_RFDC_MASK 0x007f
@@ -261,7 +263,8 @@
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
     defined(CONFIG_CPU_SUBTYPE_SH7720) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7721)
+    defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+    defined(CONFIG_ARCH_SHMOBILE)
 # define SCxSR_RDxF_CLEAR(port)	 (sci_in(port, SCxSR) & 0xfffc)
 # define SCxSR_ERROR_CLEAR(port) (sci_in(port, SCxSR) & 0xfd73)
 # define SCxSR_TDxE_CLEAR(port)	 (sci_in(port, SCxSR) & 0xffdf)
@@ -356,7 +359,7 @@
     SCI_OUT(sci_size, sci_offset, value);				\
   }
 
-#ifdef CONFIG_CPU_SH3
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_ARCH_SHMOBILE)
 #if defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
 #define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \
 		                sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \
@@ -366,7 +369,8 @@
 	  CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size)
 #elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \
       defined(CONFIG_CPU_SUBTYPE_SH7720) || \
-      defined(CONFIG_CPU_SUBTYPE_SH7721)
+      defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+      defined(CONFIG_ARCH_SHMOBILE)
 #define SCIF_FNS(name, scif_offset, scif_size) \
   CPU_SCIF_FNS(name, scif_offset, scif_size)
 #else
@@ -401,7 +405,8 @@
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
     defined(CONFIG_CPU_SUBTYPE_SH7720) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7721)
+    defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+    defined(CONFIG_ARCH_SHMOBILE)
 
 SCIF_FNS(SCSMR,  0x00, 16)
 SCIF_FNS(SCBRR,  0x04,  8)
@@ -413,7 +418,7 @@ SCIF_FNS(SCFCR,  0x18, 16)
 SCIF_FNS(SCFDR,  0x1c, 16)
 SCIF_FNS(SCxTDR, 0x20,  8)
 SCIF_FNS(SCxRDR, 0x24,  8)
-SCIF_FNS(SCLSR,  0x24, 16)
+SCIF_FNS(SCLSR,  0x00,  0)
 #elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\
       defined(CONFIG_CPU_SUBTYPE_SH7724)
 SCIx_FNS(SCSMR,  0x00, 16, 0x00, 16)
@@ -583,7 +588,8 @@ static inline int sci_rxd_in(struct uart_port *port)
 #define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(16*bps)-1)
 #elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \
       defined(CONFIG_CPU_SUBTYPE_SH7720) || \
-      defined(CONFIG_CPU_SUBTYPE_SH7721)
+      defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+      defined(CONFIG_ARCH_SHMOBILE)
 #define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1)
 #elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\
       defined(CONFIG_CPU_SUBTYPE_SH7724)
diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c
index d514e28d0755..d2e0321049e2 100644
--- a/drivers/serial/sunsab.c
+++ b/drivers/serial/sunsab.c
@@ -474,7 +474,7 @@ static void sunsab_stop_rx(struct uart_port *port)
 {
 	struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
 
-	up->interrupt_mask0 |= SAB82532_ISR0_TCD;
+	up->interrupt_mask0 |= SAB82532_IMR0_TCD;
 	writeb(up->interrupt_mask1, &up->regs->w.imr0);
 }
 
diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c
index ab2ab3c81834..f0a6c61b17f7 100644
--- a/drivers/serial/uartlite.c
+++ b/drivers/serial/uartlite.c
@@ -19,7 +19,7 @@
 #include <linux/interrupt.h>
 #include <linux/init.h>
 #include <asm/io.h>
-#if defined(CONFIG_OF)
+#if defined(CONFIG_OF) && (defined(CONFIG_PPC32) || defined(CONFIG_MICROBLAZE))
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/of_platform.h>
@@ -581,7 +581,7 @@ static struct platform_driver ulite_platform_driver = {
 /* ---------------------------------------------------------------------
  * OF bus bindings
  */
-#if defined(CONFIG_OF)
+#if defined(CONFIG_OF) && (defined(CONFIG_PPC32) || defined(CONFIG_MICROBLAZE))
 static int __devinit
 ulite_of_probe(struct of_device *op, const struct of_device_id *match)
 {
@@ -631,11 +631,11 @@ static inline void __exit ulite_of_unregister(void)
 {
 	of_unregister_platform_driver(&ulite_of_driver);
 }
-#else /* CONFIG_OF */
-/* CONFIG_OF not enabled; do nothing helpers */
+#else /* CONFIG_OF && (CONFIG_PPC32 || CONFIG_MICROBLAZE) */
+/* Appropriate config not enabled; do nothing helpers */
 static inline int __init ulite_of_register(void) { return 0; }
 static inline void __exit ulite_of_unregister(void) { }
-#endif /* CONFIG_OF */
+#endif /* CONFIG_OF && (CONFIG_PPC32 || CONFIG_MICROBLAZE) */
 
 /* ---------------------------------------------------------------------
  * Module setup/teardown
diff --git a/drivers/sh/intc.c b/drivers/sh/intc.c
index b8983fed76f5..a3d8677af6a5 100644
--- a/drivers/sh/intc.c
+++ b/drivers/sh/intc.c
@@ -788,6 +788,10 @@ static void __init intc_register_irq(struct intc_desc *desc,
 
 	if (desc->hw.ack_regs)
 		ack_handle[irq] = intc_ack_data(desc, d, enum_id);
+
+#ifdef CONFIG_ARM
+	set_irq_flags(irq, IRQF_VALID); /* Enable IRQ on ARM systems */
+#endif
 }
 
 static unsigned int __init save_reg(struct intc_desc_int *d,
@@ -1053,8 +1057,12 @@ unsigned int create_irq_nr(unsigned int irq_want, int node)
 out_unlock:
 	spin_unlock_irqrestore(&vector_lock, flags);
 
-	if (irq > 0)
+	if (irq > 0) {
 		dynamic_irq_init(irq);
+#ifdef CONFIG_ARM
+		set_irq_flags(irq, IRQF_VALID); /* Enable IRQ on ARM systems */
+#endif
+	}
 
 	return irq;
 }
diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c
index 715c518b1b68..4dd786b99b8b 100644
--- a/drivers/spi/omap2_mcspi.c
+++ b/drivers/spi/omap2_mcspi.c
@@ -578,6 +578,7 @@ static int omap2_mcspi_setup_transfer(struct spi_device *spi,
 	struct spi_master *spi_cntrl;
 	u32 l = 0, div = 0;
 	u8 word_len = spi->bits_per_word;
+	u32 speed_hz = spi->max_speed_hz;
 
 	mcspi = spi_master_get_devdata(spi->master);
 	spi_cntrl = mcspi->master;
@@ -587,9 +588,12 @@ static int omap2_mcspi_setup_transfer(struct spi_device *spi,
 
 	cs->word_len = word_len;
 
-	if (spi->max_speed_hz) {
+	if (t && t->speed_hz)
+		speed_hz = t->speed_hz;
+
+	if (speed_hz) {
 		while (div <= 15 && (OMAP2_MCSPI_MAX_FREQ / (1 << div))
-					> spi->max_speed_hz)
+					> speed_hz)
 			div++;
 	} else
 		div = 15;
@@ -751,11 +755,13 @@ static void omap2_mcspi_cleanup(struct spi_device *spi)
 	mcspi = spi_master_get_devdata(spi->master);
 	mcspi_dma = &mcspi->dma_channels[spi->chip_select];
 
-	/* Unlink controller state from context save list */
-	cs = spi->controller_state;
-	list_del(&cs->node);
+	if (spi->controller_state) {
+		/* Unlink controller state from context save list */
+		cs = spi->controller_state;
+		list_del(&cs->node);
 
-	kfree(spi->controller_state);
+		kfree(spi->controller_state);
+	}
 
 	if (mcspi_dma->dma_rx_channel != -1) {
 		omap_free_dma(mcspi_dma->dma_rx_channel);
diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c
index c010733877ae..1fabede9e061 100644
--- a/drivers/spi/spi_s3c24xx.c
+++ b/drivers/spi/spi_s3c24xx.c
@@ -275,7 +275,7 @@ static inline u32 ack_bit(unsigned int irq)
  * Claim the FIQ handler (only one can be active at any one time) and
  * then setup the correct transfer code for this transfer.
  *
- * This call updates all the necessary state information if sucessful,
+ * This call updates all the necessary state information if successful,
  * so the caller does not need to do anything more than start the transfer
  * as normal, since the IRQ will have been re-routed to the FIQ handler.
 */
diff --git a/drivers/staging/asus_oled/asus_oled.c b/drivers/staging/asus_oled/asus_oled.c
index cadb6f7321ad..7ebecc92c61b 100644
--- a/drivers/staging/asus_oled/asus_oled.c
+++ b/drivers/staging/asus_oled/asus_oled.c
@@ -770,13 +770,8 @@ static struct usb_driver oled_driver = {
 	.id_table =	id_table,
 };
 
-static ssize_t version_show(struct class *dev, char *buf)
-{
-	return sprintf(buf, ASUS_OLED_UNDERSCORE_NAME " %s\n",
-		       ASUS_OLED_VERSION);
-}
-
-static CLASS_ATTR(version, S_IRUGO, version_show, NULL);
+static CLASS_ATTR_STRING(version, S_IRUGO,
+		 	ASUS_OLED_UNDERSCORE_NAME " " ASUS_OLED_VERSION);
 
 static int __init asus_oled_init(void)
 {
@@ -788,7 +783,7 @@ static int __init asus_oled_init(void)
 		return PTR_ERR(oled_class);
 	}
 
-	retval = class_create_file(oled_class, &class_attr_version);
+	retval = class_create_file(oled_class, &class_attr_version.attr);
 	if (retval) {
 		err("Error creating class version file");
 		goto error;
@@ -810,7 +805,7 @@ error:
 
 static void __exit asus_oled_exit(void)
 {
-	class_remove_file(oled_class, &class_attr_version);
+	class_remove_file(oled_class, &class_attr_version.attr);
 	class_destroy(oled_class);
 
 	usb_deregister(&oled_driver);
diff --git a/drivers/staging/samsung-laptop/samsung-laptop.c b/drivers/staging/samsung-laptop/samsung-laptop.c
index dd7ea4c075db..eb44b60e1eb5 100644
--- a/drivers/staging/samsung-laptop/samsung-laptop.c
+++ b/drivers/staging/samsung-laptop/samsung-laptop.c
@@ -394,6 +394,7 @@ MODULE_DEVICE_TABLE(dmi, samsung_dmi_table);
 
 static int __init samsung_init(void)
 {
+	struct backlight_properties props;
 	struct sabi_retval sretval;
 	const char *testStr = "SECLINUX";
 	void __iomem *memcheck;
@@ -486,12 +487,14 @@ static int __init samsung_init(void)
 		goto error_no_platform;
 
 	/* create a backlight device to talk to this one */
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.max_brightness = MAX_BRIGHT;
 	backlight_device = backlight_device_register("samsung", &sdev->dev,
-						     NULL, &backlight_ops);
+						     NULL, &backlight_ops,
+						     &props);
 	if (IS_ERR(backlight_device))
 		goto error_no_backlight;
 
-	backlight_device->props.max_brightness = MAX_BRIGHT;
 	backlight_device->props.brightness = read_brightness();
 	backlight_device->props.power = FB_BLANK_UNBLANK;
 	backlight_update_status(backlight_device);
diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig
index 8aa1955f35ed..1da73ecd9799 100644
--- a/drivers/uio/Kconfig
+++ b/drivers/uio/Kconfig
@@ -44,17 +44,6 @@ config UIO_PDRV_GENIRQ
 
 	  If you don't know what to do here, say N.
 
-config UIO_SMX
-	tristate "SMX cryptengine UIO interface"
-	help
-	  Userspace IO interface to the Cryptography engine found on the
-	  Nias Digital SMX boards.  These will be available from Q4 2008
-	  from http://www.niasdigital.com.  The userspace part of this
-	  driver will be released under the GPL at the same time as the
-	  hardware and will be able to be downloaded from the same site.
-
-	  If you compile this as a module, it will be called uio_smx.
-
 config UIO_AEC
 	tristate "AEC video timestamp device"
 	depends on PCI
@@ -74,6 +63,7 @@ config UIO_AEC
 
 config UIO_SERCOS3
 	tristate "Automata Sercos III PCI card driver"
+	depends on PCI
 	help
 	  Userspace I/O interface for the Sercos III PCI card from
 	  Automata GmbH. The userspace part of this driver will be
@@ -87,11 +77,21 @@ config UIO_SERCOS3
 config UIO_PCI_GENERIC
 	tristate "Generic driver for PCI 2.3 and PCI Express cards"
 	depends on PCI
-	default n
 	help
 	  Generic driver that you can bind, dynamically, to any
 	  PCI 2.3 compliant and PCI Express card. It is useful,
 	  primarily, for virtualization scenarios.
 	  If you compile this as a module, it will be called uio_pci_generic.
 
+config UIO_NETX
+	tristate "Hilscher NetX Card driver"
+	depends on PCI
+	help
+	  Driver for Hilscher NetX based fieldbus cards (cifX, comX).
+	  This driver requires a userspace component that comes with the card
+	  or is available from Hilscher (http://www.hilscher.com).
+
+	  To compile this driver as a module, choose M here; the module
+	  will be called uio_netx.
+
 endif
diff --git a/drivers/uio/Makefile b/drivers/uio/Makefile
index 73b2e7516729..18fd818c5b97 100644
--- a/drivers/uio/Makefile
+++ b/drivers/uio/Makefile
@@ -2,7 +2,7 @@ obj-$(CONFIG_UIO)	+= uio.o
 obj-$(CONFIG_UIO_CIF)	+= uio_cif.o
 obj-$(CONFIG_UIO_PDRV)	+= uio_pdrv.o
 obj-$(CONFIG_UIO_PDRV_GENIRQ)	+= uio_pdrv_genirq.o
-obj-$(CONFIG_UIO_SMX)	+= uio_smx.o
 obj-$(CONFIG_UIO_AEC)	+= uio_aec.o
 obj-$(CONFIG_UIO_SERCOS3)	+= uio_sercos3.o
 obj-$(CONFIG_UIO_PCI_GENERIC)	+= uio_pci_generic.o
+obj-$(CONFIG_UIO_NETX)	+= uio_netx.o
diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c
index e941367dd28f..4de382acd8f2 100644
--- a/drivers/uio/uio.c
+++ b/drivers/uio/uio.c
@@ -129,7 +129,7 @@ static ssize_t map_type_show(struct kobject *kobj, struct attribute *attr,
 	return entry->show(mem, buf);
 }
 
-static struct sysfs_ops map_sysfs_ops = {
+static const struct sysfs_ops map_sysfs_ops = {
 	.show = map_type_show,
 };
 
@@ -217,7 +217,7 @@ static ssize_t portio_type_show(struct kobject *kobj, struct attribute *attr,
 	return entry->show(port, buf);
 }
 
-static struct sysfs_ops portio_sysfs_ops = {
+static const struct sysfs_ops portio_sysfs_ops = {
 	.show = portio_type_show,
 };
 
diff --git a/drivers/uio/uio_netx.c b/drivers/uio/uio_netx.c
new file mode 100644
index 000000000000..afbf0bd55cc9
--- /dev/null
+++ b/drivers/uio/uio_netx.c
@@ -0,0 +1,172 @@
+/*
+ * UIO driver for Hilscher NetX based fieldbus cards (cifX, comX).
+ * See http://www.hilscher.com for details.
+ *
+ * (C) 2007 Hans J. Koch <hjk@linutronix.de>
+ * (C) 2008 Manuel Traut <manut@linutronix.de>
+ *
+ * Licensed under GPL version 2 only.
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/uio_driver.h>
+
+#define PCI_VENDOR_ID_HILSCHER		0x15CF
+#define PCI_DEVICE_ID_HILSCHER_NETX	0x0000
+#define PCI_SUBDEVICE_ID_NXSB_PCA	0x3235
+#define PCI_SUBDEVICE_ID_NXPCA		0x3335
+
+#define DPM_HOST_INT_EN0	0xfff0
+#define DPM_HOST_INT_STAT0	0xffe0
+
+#define DPM_HOST_INT_MASK	0xe600ffff
+#define DPM_HOST_INT_GLOBAL_EN	0x80000000
+
+static irqreturn_t netx_handler(int irq, struct uio_info *dev_info)
+{
+	void __iomem *int_enable_reg = dev_info->mem[0].internal_addr
+					+ DPM_HOST_INT_EN0;
+	void __iomem *int_status_reg = dev_info->mem[0].internal_addr
+					+ DPM_HOST_INT_STAT0;
+
+	/* Is one of our interrupts enabled and active ? */
+	if (!(ioread32(int_enable_reg) & ioread32(int_status_reg)
+		& DPM_HOST_INT_MASK))
+		return IRQ_NONE;
+
+	/* Disable interrupt */
+	iowrite32(ioread32(int_enable_reg) & ~DPM_HOST_INT_GLOBAL_EN,
+		int_enable_reg);
+	return IRQ_HANDLED;
+}
+
+static int __devinit netx_pci_probe(struct pci_dev *dev,
+					const struct pci_device_id *id)
+{
+	struct uio_info *info;
+	int bar;
+
+	info = kzalloc(sizeof(struct uio_info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	if (pci_enable_device(dev))
+		goto out_free;
+
+	if (pci_request_regions(dev, "netx"))
+		goto out_disable;
+
+	switch (id->device) {
+	case PCI_DEVICE_ID_HILSCHER_NETX:
+		bar = 0;
+		info->name = "netx";
+		break;
+	default:
+		bar = 2;
+		info->name = "netx_plx";
+	}
+
+	/* BAR0 or 2 points to the card's dual port memory */
+	info->mem[0].addr = pci_resource_start(dev, bar);
+	if (!info->mem[0].addr)
+		goto out_release;
+	info->mem[0].internal_addr = ioremap(pci_resource_start(dev, bar),
+						pci_resource_len(dev, bar));
+
+	if (!info->mem[0].internal_addr)
+			goto out_release;
+
+	info->mem[0].size = pci_resource_len(dev, bar);
+	info->mem[0].memtype = UIO_MEM_PHYS;
+	info->irq = dev->irq;
+	info->irq_flags = IRQF_SHARED;
+	info->handler = netx_handler;
+	info->version = "0.0.1";
+
+	/* Make sure all interrupts are disabled */
+	iowrite32(0, info->mem[0].internal_addr + DPM_HOST_INT_EN0);
+
+	if (uio_register_device(&dev->dev, info))
+		goto out_unmap;
+
+	pci_set_drvdata(dev, info);
+	dev_info(&dev->dev, "Found %s card, registered UIO device.\n",
+				info->name);
+
+	return 0;
+
+out_unmap:
+	iounmap(info->mem[0].internal_addr);
+out_release:
+	pci_release_regions(dev);
+out_disable:
+	pci_disable_device(dev);
+out_free:
+	kfree(info);
+	return -ENODEV;
+}
+
+static void netx_pci_remove(struct pci_dev *dev)
+{
+	struct uio_info *info = pci_get_drvdata(dev);
+
+	/* Disable all interrupts */
+	iowrite32(0, info->mem[0].internal_addr + DPM_HOST_INT_EN0);
+	uio_unregister_device(info);
+	pci_release_regions(dev);
+	pci_disable_device(dev);
+	pci_set_drvdata(dev, NULL);
+	iounmap(info->mem[0].internal_addr);
+
+	kfree(info);
+}
+
+static struct pci_device_id netx_pci_ids[] = {
+	{
+		.vendor =	PCI_VENDOR_ID_HILSCHER,
+		.device =	PCI_DEVICE_ID_HILSCHER_NETX,
+		.subvendor =	0,
+		.subdevice =	0,
+	},
+	{
+		.vendor =	PCI_VENDOR_ID_PLX,
+		.device =	PCI_DEVICE_ID_PLX_9030,
+		.subvendor =	PCI_VENDOR_ID_PLX,
+		.subdevice =	PCI_SUBDEVICE_ID_NXSB_PCA,
+	},
+	{
+		.vendor =	PCI_VENDOR_ID_PLX,
+		.device =	PCI_DEVICE_ID_PLX_9030,
+		.subvendor =	PCI_VENDOR_ID_PLX,
+		.subdevice =	PCI_SUBDEVICE_ID_NXPCA,
+	},
+	{ 0, }
+};
+
+static struct pci_driver netx_pci_driver = {
+	.name = "netx",
+	.id_table = netx_pci_ids,
+	.probe = netx_pci_probe,
+	.remove = netx_pci_remove,
+};
+
+static int __init netx_init_module(void)
+{
+	return pci_register_driver(&netx_pci_driver);
+}
+
+static void __exit netx_exit_module(void)
+{
+	pci_unregister_driver(&netx_pci_driver);
+}
+
+module_init(netx_init_module);
+module_exit(netx_exit_module);
+
+MODULE_DEVICE_TABLE(pci, netx_pci_ids);
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Hans J. Koch, Manuel Traut");
diff --git a/drivers/uio/uio_smx.c b/drivers/uio/uio_smx.c
deleted file mode 100644
index 44054a650a8a..000000000000
--- a/drivers/uio/uio_smx.c
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- * UIO SMX Cryptengine driver.
- *
- * (C) 2008 Nias Digital P/L <bn@niasdigital.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/device.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/uio_driver.h>
-#include <linux/io.h>
-
-#define DRV_NAME "smx-ce"
-#define DRV_VERSION "0.03"
-
-#define SMX_CSR  0x00000000
-#define SMX_EnD  0x00000001
-#define SMX_RUN  0x00000002
-#define SMX_DRDY 0x00000004
-#define SMX_ERR  0x00000008
-
-static irqreturn_t smx_handler(int irq, struct uio_info *dev_info)
-{
-	void __iomem *csr = dev_info->mem[0].internal_addr + SMX_CSR;
-
-	u32 status = ioread32(csr);
-
-	if (!(status & SMX_DRDY))
-		return IRQ_NONE;
-
-	/* Disable interrupt */
-	iowrite32(status & ~SMX_DRDY, csr);
-	return IRQ_HANDLED;
-}
-
-static int __devinit smx_ce_probe(struct platform_device *dev)
-{
-
-	int ret = -ENODEV;
-	struct uio_info *info;
-	struct resource *regs;
-
-	info = kzalloc(sizeof(struct uio_info), GFP_KERNEL);
-	if (!info)
-		return -ENOMEM;
-
-	regs = platform_get_resource(dev, IORESOURCE_MEM, 0);
-	if (!regs) {
-		dev_err(&dev->dev, "No memory resource specified\n");
-		goto out_free;
-	}
-
-	info->mem[0].addr = regs->start;
-	if (!info->mem[0].addr) {
-		dev_err(&dev->dev, "Invalid memory resource\n");
-		goto out_free;
-	}
-
-	info->mem[0].size = regs->end - regs->start + 1;
-	info->mem[0].internal_addr = ioremap(regs->start, info->mem[0].size);
-
-	if (!info->mem[0].internal_addr) {
-		dev_err(&dev->dev, "Can't remap memory address range\n");
-		goto out_free;
-	}
-
-	info->mem[0].memtype = UIO_MEM_PHYS;
-
-	info->name = "smx-ce";
-	info->version = "0.03";
-
-	info->irq = platform_get_irq(dev, 0);
-	if (info->irq < 0) {
-		ret = info->irq;
-		dev_err(&dev->dev, "No (or invalid) IRQ resource specified\n");
-		goto out_unmap;
-	}
-
-	info->irq_flags = IRQF_SHARED;
-	info->handler = smx_handler;
-
-	platform_set_drvdata(dev, info);
-
-	ret = uio_register_device(&dev->dev, info);
-
-	if (ret)
-		goto out_unmap;
-
-	return 0;
-
-out_unmap:
-	iounmap(info->mem[0].internal_addr);
-out_free:
-	kfree(info);
-
-	return ret;
-}
-
-static int __devexit smx_ce_remove(struct platform_device *dev)
-{
-	struct uio_info *info = platform_get_drvdata(dev);
-
-	uio_unregister_device(info);
-	platform_set_drvdata(dev, NULL);
-	iounmap(info->mem[0].internal_addr);
-
-	kfree(info);
-
-	return 0;
-}
-
-static struct platform_driver smx_ce_driver = {
-	.probe		= smx_ce_probe,
-	.remove		= __devexit_p(smx_ce_remove),
-	.driver		= {
-		.name	= DRV_NAME,
-		.owner	= THIS_MODULE,
-	},
-};
-
-static int __init smx_ce_init_module(void)
-{
-	return platform_driver_register(&smx_ce_driver);
-}
-module_init(smx_ce_init_module);
-
-static void __exit smx_ce_exit_module(void)
-{
-	platform_driver_unregister(&smx_ce_driver);
-}
-module_exit(smx_ce_exit_module);
-
-MODULE_LICENSE("GPL v2");
-MODULE_VERSION(DRV_VERSION);
-MODULE_AUTHOR("Ben Nizette <bn@niasdigital.com>");
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 975d556b4787..be6331e2c276 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1441,7 +1441,7 @@ static int acm_resume(struct usb_interface *intf)
 			wb = acm->delayed_wb;
 			acm->delayed_wb = NULL;
 			spin_unlock_irq(&acm->write_lock);
-			acm_start_wb(acm, acm->delayed_wb);
+			acm_start_wb(acm, wb);
 		} else {
 			spin_unlock_irq(&acm->write_lock);
 		}
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 18aafcb08fc8..189141ca4e05 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -52,7 +52,8 @@ MODULE_DEVICE_TABLE (usb, wdm_ids);
 #define WDM_READ		4
 #define WDM_INT_STALL		5
 #define WDM_POLL_RUNNING	6
-
+#define WDM_RESPONDING		7
+#define WDM_SUSPENDING		8
 
 #define WDM_MAX			16
 
@@ -87,9 +88,7 @@ struct wdm_device {
 	int			count;
 	dma_addr_t		shandle;
 	dma_addr_t		ihandle;
-	struct mutex		wlock;
-	struct mutex		rlock;
-	struct mutex		plock;
+	struct mutex		lock;
 	wait_queue_head_t	wait;
 	struct work_struct	rxwork;
 	int			werr;
@@ -117,21 +116,22 @@ static void wdm_in_callback(struct urb *urb)
 	int status = urb->status;
 
 	spin_lock(&desc->iuspin);
+	clear_bit(WDM_RESPONDING, &desc->flags);
 
 	if (status) {
 		switch (status) {
 		case -ENOENT:
 			dev_dbg(&desc->intf->dev,
 				"nonzero urb status received: -ENOENT");
-			break;
+			goto skip_error;
 		case -ECONNRESET:
 			dev_dbg(&desc->intf->dev,
 				"nonzero urb status received: -ECONNRESET");
-			break;
+			goto skip_error;
 		case -ESHUTDOWN:
 			dev_dbg(&desc->intf->dev,
 				"nonzero urb status received: -ESHUTDOWN");
-			break;
+			goto skip_error;
 		case -EPIPE:
 			dev_err(&desc->intf->dev,
 				"nonzero urb status received: -EPIPE\n");
@@ -147,6 +147,7 @@ static void wdm_in_callback(struct urb *urb)
 	desc->reslength = urb->actual_length;
 	memmove(desc->ubuf + desc->length, desc->inbuf, desc->reslength);
 	desc->length += desc->reslength;
+skip_error:
 	wake_up(&desc->wait);
 
 	set_bit(WDM_READ, &desc->flags);
@@ -229,13 +230,16 @@ static void wdm_int_callback(struct urb *urb)
 	desc->response->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 	spin_lock(&desc->iuspin);
 	clear_bit(WDM_READ, &desc->flags);
-	if (!test_bit(WDM_DISCONNECTING, &desc->flags)) {
+	set_bit(WDM_RESPONDING, &desc->flags);
+	if (!test_bit(WDM_DISCONNECTING, &desc->flags)
+		&& !test_bit(WDM_SUSPENDING, &desc->flags)) {
 		rv = usb_submit_urb(desc->response, GFP_ATOMIC);
 		dev_dbg(&desc->intf->dev, "%s: usb_submit_urb %d",
 			__func__, rv);
 	}
 	spin_unlock(&desc->iuspin);
 	if (rv < 0) {
+		clear_bit(WDM_RESPONDING, &desc->flags);
 		if (rv == -EPERM)
 			return;
 		if (rv == -ENOMEM) {
@@ -305,14 +309,38 @@ static ssize_t wdm_write
 	if (we < 0)
 		return -EIO;
 
-	r = mutex_lock_interruptible(&desc->wlock); /* concurrent writes */
+	desc->outbuf = buf = kmalloc(count, GFP_KERNEL);
+	if (!buf) {
+		rv = -ENOMEM;
+		goto outnl;
+	}
+
+	r = copy_from_user(buf, buffer, count);
+	if (r > 0) {
+		kfree(buf);
+		rv = -EFAULT;
+		goto outnl;
+	}
+
+	/* concurrent writes and disconnect */
+	r = mutex_lock_interruptible(&desc->lock);
 	rv = -ERESTARTSYS;
-	if (r)
+	if (r) {
+		kfree(buf);
 		goto outnl;
+	}
+
+	if (test_bit(WDM_DISCONNECTING, &desc->flags)) {
+		kfree(buf);
+		rv = -ENODEV;
+		goto outnp;
+	}
 
 	r = usb_autopm_get_interface(desc->intf);
-	if (r < 0)
+	if (r < 0) {
+		kfree(buf);
 		goto outnp;
+	}
 
 	if (!file->f_flags && O_NONBLOCK)
 		r = wait_event_interruptible(desc->wait, !test_bit(WDM_IN_USE,
@@ -320,24 +348,8 @@ static ssize_t wdm_write
 	else
 		if (test_bit(WDM_IN_USE, &desc->flags))
 			r = -EAGAIN;
-	if (r < 0)
-		goto out;
-
-	if (test_bit(WDM_DISCONNECTING, &desc->flags)) {
-		rv = -ENODEV;
-		goto out;
-	}
-
-	desc->outbuf = buf = kmalloc(count, GFP_KERNEL);
-	if (!buf) {
-		rv = -ENOMEM;
-		goto out;
-	}
-
-	r = copy_from_user(buf, buffer, count);
-	if (r > 0) {
+	if (r < 0) {
 		kfree(buf);
-		rv = -EFAULT;
 		goto out;
 	}
 
@@ -374,7 +386,7 @@ static ssize_t wdm_write
 out:
 	usb_autopm_put_interface(desc->intf);
 outnp:
-	mutex_unlock(&desc->wlock);
+	mutex_unlock(&desc->lock);
 outnl:
 	return rv < 0 ? rv : count;
 }
@@ -387,7 +399,7 @@ static ssize_t wdm_read
 	struct wdm_device *desc = file->private_data;
 
 
-	rv = mutex_lock_interruptible(&desc->rlock); /*concurrent reads */
+	rv = mutex_lock_interruptible(&desc->lock); /*concurrent reads */
 	if (rv < 0)
 		return -ERESTARTSYS;
 
@@ -424,11 +436,8 @@ retry:
 		spin_lock_irq(&desc->iuspin);
 
 		if (desc->rerr) { /* read completed, error happened */
-			int t = desc->rerr;
 			desc->rerr = 0;
 			spin_unlock_irq(&desc->iuspin);
-			dev_err(&desc->intf->dev,
-				"reading had resulted in %d\n", t);
 			rv = -EIO;
 			goto err;
 		}
@@ -465,9 +474,7 @@ retry:
 	rv = cntr;
 
 err:
-	mutex_unlock(&desc->rlock);
-	if (rv < 0 && rv != -EAGAIN)
-		dev_err(&desc->intf->dev, "wdm_read: exit error\n");
+	mutex_unlock(&desc->lock);
 	return rv;
 }
 
@@ -533,7 +540,7 @@ static int wdm_open(struct inode *inode, struct file *file)
 	}
 	intf->needs_remote_wakeup = 1;
 
-	mutex_lock(&desc->plock);
+	mutex_lock(&desc->lock);
 	if (!desc->count++) {
 		rv = usb_submit_urb(desc->validity, GFP_KERNEL);
 		if (rv < 0) {
@@ -544,7 +551,7 @@ static int wdm_open(struct inode *inode, struct file *file)
 	} else {
 		rv = 0;
 	}
-	mutex_unlock(&desc->plock);
+	mutex_unlock(&desc->lock);
 	usb_autopm_put_interface(desc->intf);
 out:
 	mutex_unlock(&wdm_mutex);
@@ -556,9 +563,9 @@ static int wdm_release(struct inode *inode, struct file *file)
 	struct wdm_device *desc = file->private_data;
 
 	mutex_lock(&wdm_mutex);
-	mutex_lock(&desc->plock);
+	mutex_lock(&desc->lock);
 	desc->count--;
-	mutex_unlock(&desc->plock);
+	mutex_unlock(&desc->lock);
 
 	if (!desc->count) {
 		dev_dbg(&desc->intf->dev, "wdm_release: cleanup");
@@ -655,9 +662,7 @@ next_desc:
 	desc = kzalloc(sizeof(struct wdm_device), GFP_KERNEL);
 	if (!desc)
 		goto out;
-	mutex_init(&desc->wlock);
-	mutex_init(&desc->rlock);
-	mutex_init(&desc->plock);
+	mutex_init(&desc->lock);
 	spin_lock_init(&desc->iuspin);
 	init_waitqueue_head(&desc->wait);
 	desc->wMaxCommand = maxcom;
@@ -771,14 +776,17 @@ static void wdm_disconnect(struct usb_interface *intf)
 	/* to terminate pending flushes */
 	clear_bit(WDM_IN_USE, &desc->flags);
 	spin_unlock_irqrestore(&desc->iuspin, flags);
-	cancel_work_sync(&desc->rxwork);
+	mutex_lock(&desc->lock);
 	kill_urbs(desc);
+	cancel_work_sync(&desc->rxwork);
+	mutex_unlock(&desc->lock);
 	wake_up_all(&desc->wait);
 	if (!desc->count)
 		cleanup(desc);
 	mutex_unlock(&wdm_mutex);
 }
 
+#ifdef CONFIG_PM
 static int wdm_suspend(struct usb_interface *intf, pm_message_t message)
 {
 	struct wdm_device *desc = usb_get_intfdata(intf);
@@ -786,22 +794,30 @@ static int wdm_suspend(struct usb_interface *intf, pm_message_t message)
 
 	dev_dbg(&desc->intf->dev, "wdm%d_suspend\n", intf->minor);
 
-	mutex_lock(&desc->plock);
-#ifdef CONFIG_PM
+	/* if this is an autosuspend the caller does the locking */
+	if (!(message.event & PM_EVENT_AUTO))
+		mutex_lock(&desc->lock);
+	spin_lock_irq(&desc->iuspin);
+
 	if ((message.event & PM_EVENT_AUTO) &&
-			test_bit(WDM_IN_USE, &desc->flags)) {
+			(test_bit(WDM_IN_USE, &desc->flags)
+			|| test_bit(WDM_RESPONDING, &desc->flags))) {
+		spin_unlock_irq(&desc->iuspin);
 		rv = -EBUSY;
 	} else {
-#endif
-		cancel_work_sync(&desc->rxwork);
+
+		set_bit(WDM_SUSPENDING, &desc->flags);
+		spin_unlock_irq(&desc->iuspin);
+		/* callback submits work - order is essential */
 		kill_urbs(desc);
-#ifdef CONFIG_PM
+		cancel_work_sync(&desc->rxwork);
 	}
-#endif
-	mutex_unlock(&desc->plock);
+	if (!(message.event & PM_EVENT_AUTO))
+		mutex_unlock(&desc->lock);
 
 	return rv;
 }
+#endif
 
 static int recover_from_urb_loss(struct wdm_device *desc)
 {
@@ -815,23 +831,27 @@ static int recover_from_urb_loss(struct wdm_device *desc)
 	}
 	return rv;
 }
+
+#ifdef CONFIG_PM
 static int wdm_resume(struct usb_interface *intf)
 {
 	struct wdm_device *desc = usb_get_intfdata(intf);
 	int rv;
 
 	dev_dbg(&desc->intf->dev, "wdm%d_resume\n", intf->minor);
-	mutex_lock(&desc->plock);
+
+	clear_bit(WDM_SUSPENDING, &desc->flags);
 	rv = recover_from_urb_loss(desc);
-	mutex_unlock(&desc->plock);
+
 	return rv;
 }
+#endif
 
 static int wdm_pre_reset(struct usb_interface *intf)
 {
 	struct wdm_device *desc = usb_get_intfdata(intf);
 
-	mutex_lock(&desc->plock);
+	mutex_lock(&desc->lock);
 	return 0;
 }
 
@@ -841,7 +861,7 @@ static int wdm_post_reset(struct usb_interface *intf)
 	int rv;
 
 	rv = recover_from_urb_loss(desc);
-	mutex_unlock(&desc->plock);
+	mutex_unlock(&desc->lock);
 	return 0;
 }
 
@@ -849,9 +869,11 @@ static struct usb_driver wdm_driver = {
 	.name =		"cdc_wdm",
 	.probe =	wdm_probe,
 	.disconnect =	wdm_disconnect,
+#ifdef CONFIG_PM
 	.suspend =	wdm_suspend,
 	.resume =	wdm_resume,
 	.reset_resume =	wdm_resume,
+#endif
 	.pre_reset =	wdm_pre_reset,
 	.post_reset =	wdm_post_reset,
 	.id_table =	wdm_ids,
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index e909ff7b9094..3466fdc5bb11 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -1207,6 +1207,13 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
 			free_async(as);
 			return -ENOMEM;
 		}
+		/* Isochronous input data may end up being discontiguous
+		 * if some of the packets are short.  Clear the buffer so
+		 * that the gaps don't leak kernel data to userspace.
+		 */
+		if (is_in && uurb->type == USBDEVFS_URB_TYPE_ISO)
+			memset(as->urb->transfer_buffer, 0,
+					uurb->buffer_length);
 	}
 	as->urb->dev = ps->dev;
 	as->urb->pipe = (uurb->type << 30) |
@@ -1345,10 +1352,14 @@ static int processcompl(struct async *as, void __user * __user *arg)
 	void __user *addr = as->userurb;
 	unsigned int i;
 
-	if (as->userbuffer && urb->actual_length)
-		if (copy_to_user(as->userbuffer, urb->transfer_buffer,
-				 urb->actual_length))
+	if (as->userbuffer && urb->actual_length) {
+		if (urb->number_of_packets > 0)		/* Isochronous */
+			i = urb->transfer_buffer_length;
+		else					/* Non-Isoc */
+			i = urb->actual_length;
+		if (copy_to_user(as->userbuffer, urb->transfer_buffer, i))
 			goto err_out;
+	}
 	if (put_user(as->status, &userurb->status))
 		goto err_out;
 	if (put_user(urb->actual_length, &userurb->actual_length))
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index a7037bf81688..f3c233806fa3 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -489,10 +489,10 @@ void usb_driver_release_interface(struct usb_driver *driver,
 	if (device_is_registered(dev)) {
 		device_release_driver(dev);
 	} else {
-		down(&dev->sem);
+		device_lock(dev);
 		usb_unbind_interface(dev);
 		dev->driver = NULL;
-		up(&dev->sem);
+		device_unlock(dev);
 	}
 }
 EXPORT_SYMBOL_GPL(usb_driver_release_interface);
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index 27080561a1c2..45a32dadb406 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -453,6 +453,7 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
 			if (urb->interval > (1 << 15))
 				return -EINVAL;
 			max = 1 << 15;
+			break;
 		case USB_SPEED_WIRELESS:
 			if (urb->interval > 16)
 				return -EINVAL;
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 7460cd797f45..11a3e0fa4331 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -747,7 +747,7 @@ config USB_MASS_STORAGE
 	  which may be used with composite framework.
 
 	  Say "y" to link the driver statically, or "m" to build
-	  a dynamically linked module called "g_file_storage".  If unsure,
+	  a dynamically linked module called "g_mass_storage".  If unsure,
 	  consider File-backed Storage Gadget.
 
 config USB_G_SERIAL
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 65a5f94cbc04..3568de210f79 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -266,7 +266,7 @@ struct usb_ep * __init usb_ep_autoconfig (
 		}
 
 #ifdef CONFIG_BLACKFIN
-	} else if (gadget_is_musbhsfc(gadget) || gadget_is_musbhdrc(gadget)) {
+	} else if (gadget_is_musbhdrc(gadget)) {
 		if ((USB_ENDPOINT_XFER_BULK == type) ||
 		    (USB_ENDPOINT_XFER_ISOC == type)) {
 			if (USB_DIR_IN & desc->bEndpointAddress)
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index 5a3cdd08f1d0..f4911c09022e 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -2910,7 +2910,7 @@ static void fsg_unbind(struct usb_configuration *c, struct usb_function *f)
 }
 
 
-static int fsg_bind(struct usb_configuration *c, struct usb_function *f)
+static int __init fsg_bind(struct usb_configuration *c, struct usb_function *f)
 {
 	struct fsg_dev		*fsg = fsg_from_func(f);
 	struct usb_gadget	*gadget = c->cdev->gadget;
@@ -2954,7 +2954,6 @@ static int fsg_bind(struct usb_configuration *c, struct usb_function *f)
 autoconf_fail:
 	ERROR(fsg, "unable to autoconfigure all endpoints\n");
 	rc = -ENOTSUPP;
-	fsg_unbind(c, f);
 	return rc;
 }
 
diff --git a/drivers/usb/gadget/fsl_mx3_udc.c b/drivers/usb/gadget/fsl_mx3_udc.c
index 4bc2bf3d602e..20a802ecaa15 100644
--- a/drivers/usb/gadget/fsl_mx3_udc.c
+++ b/drivers/usb/gadget/fsl_mx3_udc.c
@@ -17,6 +17,8 @@
 #include <linux/fsl_devices.h>
 #include <linux/platform_device.h>
 
+#include <mach/hardware.h>
+
 static struct clk *mxc_ahb_clk;
 static struct clk *mxc_usb_clk;
 
@@ -28,14 +30,16 @@ int fsl_udc_clk_init(struct platform_device *pdev)
 
 	pdata = pdev->dev.platform_data;
 
-	mxc_ahb_clk = clk_get(&pdev->dev, "usb_ahb");
-	if (IS_ERR(mxc_ahb_clk))
-		return PTR_ERR(mxc_ahb_clk);
+	if (!cpu_is_mx35()) {
+		mxc_ahb_clk = clk_get(&pdev->dev, "usb_ahb");
+		if (IS_ERR(mxc_ahb_clk))
+			return PTR_ERR(mxc_ahb_clk);
 
-	ret = clk_enable(mxc_ahb_clk);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "clk_enable(\"usb_ahb\") failed\n");
-		goto eenahb;
+		ret = clk_enable(mxc_ahb_clk);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "clk_enable(\"usb_ahb\") failed\n");
+			goto eenahb;
+		}
 	}
 
 	/* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */
@@ -50,6 +54,7 @@ int fsl_udc_clk_init(struct platform_device *pdev)
 	if (pdata->phy_mode != FSL_USB2_PHY_ULPI &&
 	    (freq < 59999000 || freq > 60001000)) {
 		dev_err(&pdev->dev, "USB_CLK=%lu, should be 60MHz\n", freq);
+		ret = -EINVAL;
 		goto eclkrate;
 	}
 
@@ -66,9 +71,11 @@ eclkrate:
 	clk_put(mxc_usb_clk);
 	mxc_usb_clk = NULL;
 egusb:
-	clk_disable(mxc_ahb_clk);
+	if (!cpu_is_mx35())
+		clk_disable(mxc_ahb_clk);
 eenahb:
-	clk_put(mxc_ahb_clk);
+	if (!cpu_is_mx35())
+		clk_put(mxc_ahb_clk);
 	return ret;
 }
 
@@ -90,6 +97,8 @@ void fsl_udc_clk_release(void)
 		clk_disable(mxc_usb_clk);
 		clk_put(mxc_usb_clk);
 	}
-	clk_disable(mxc_ahb_clk);
-	clk_put(mxc_ahb_clk);
+	if (!cpu_is_mx35()) {
+		clk_disable(mxc_ahb_clk);
+		clk_put(mxc_ahb_clk);
+	}
 }
diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
index 1edbc12fff18..e511fec9f26d 100644
--- a/drivers/usb/gadget/gadget_chips.h
+++ b/drivers/usb/gadget/gadget_chips.h
@@ -136,6 +136,12 @@
 #define	gadget_is_r8a66597(g)	0
 #endif
 
+#ifdef CONFIG_USB_S3C_HSOTG
+#define gadget_is_s3c_hsotg(g)    (!strcmp("s3c-hsotg", (g)->name))
+#else
+#define gadget_is_s3c_hsotg(g)    0
+#endif
+
 
 /**
  * usb_gadget_controller_number - support bcdDevice id convention
@@ -192,6 +198,8 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget)
 		return 0x24;
 	else if (gadget_is_r8a66597(gadget))
 		return 0x25;
+	else if (gadget_is_s3c_hsotg(gadget))
+		return 0x26;
 	return -ENOENT;
 }
 
diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c
index e8edc640381e..1088d08c7ed8 100644
--- a/drivers/usb/gadget/goku_udc.c
+++ b/drivers/usb/gadget/goku_udc.c
@@ -1768,7 +1768,7 @@ static int goku_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	 * usb_gadget_driver_{register,unregister}() must change.
 	 */
 	if (the_controller) {
-		WARNING(dev, "ignoring %s\n", pci_name(pdev));
+		pr_warning("ignoring %s\n", pci_name(pdev));
 		return -EBUSY;
 	}
 	if (!pdev->irq) {
diff --git a/drivers/usb/gadget/multi.c b/drivers/usb/gadget/multi.c
index 76496f5d272c..a930d7fd7e7a 100644
--- a/drivers/usb/gadget/multi.c
+++ b/drivers/usb/gadget/multi.c
@@ -211,8 +211,6 @@ static int __init cdc_do_config(struct usb_configuration *c)
 	ret = fsg_add(c->cdev, c, fsg_common);
 	if (ret < 0)
 		return ret;
-	if (ret < 0)
-		return ret;
 
 	return 0;
 }
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index e6fedbd5a654..be5fb34d9602 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -65,6 +65,10 @@
 #include <mach/pxa25x-udc.h>
 #endif
 
+#ifdef CONFIG_ARCH_LUBBOCK
+#include <mach/lubbock.h>
+#endif
+
 #include <asm/mach/udc_pxa2xx.h>
 
 
diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c
index 8b45145b9136..5e13d23b5f0c 100644
--- a/drivers/usb/gadget/r8a66597-udc.c
+++ b/drivers/usb/gadget/r8a66597-udc.c
@@ -23,6 +23,7 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
+#include <linux/err.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 7e5bf593d386..f742c8e7397c 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -30,7 +30,7 @@
 
 #include <plat/regs-usb-hsotg-phy.h>
 #include <plat/regs-usb-hsotg.h>
-#include <plat/regs-sys.h>
+#include <mach/regs-sys.h>
 #include <plat/udc-hs.h>
 
 #define DMA_ADDR_INVALID (~((dma_addr_t)0))
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 4e0c67f1f51b..b6315aa47f7a 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -12,7 +12,7 @@ fhci-objs := fhci-hcd.o fhci-hub.o fhci-q.o fhci-mem.o \
 ifeq ($(CONFIG_FHCI_DEBUG),y)
 fhci-objs += fhci-dbg.o
 endif
-xhci-objs := xhci-hcd.o xhci-mem.o xhci-pci.o xhci-ring.o xhci-hub.o xhci-dbg.o
+xhci-hcd-objs := xhci.o xhci-mem.o xhci-pci.o xhci-ring.o xhci-hub.o xhci-dbg.o
 
 obj-$(CONFIG_USB_WHCI_HCD)	+= whci/
 
@@ -25,7 +25,7 @@ obj-$(CONFIG_USB_ISP1362_HCD)	+= isp1362-hcd.o
 obj-$(CONFIG_USB_OHCI_HCD)	+= ohci-hcd.o
 obj-$(CONFIG_USB_UHCI_HCD)	+= uhci-hcd.o
 obj-$(CONFIG_USB_FHCI_HCD)	+= fhci.o
-obj-$(CONFIG_USB_XHCI_HCD)	+= xhci.o
+obj-$(CONFIG_USB_XHCI_HCD)	+= xhci-hcd.o
 obj-$(CONFIG_USB_SL811_HCD)	+= sl811-hcd.o
 obj-$(CONFIG_USB_SL811_CS)	+= sl811_cs.o
 obj-$(CONFIG_USB_U132_HCD)	+= u132-hcd.o
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index d8d6d3461d32..dc55a62859c6 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -995,7 +995,7 @@ rescan:
 	/* endpoints can be iso streams.  for now, we don't
 	 * accelerate iso completions ... so spin a while.
 	 */
-	if (qh->hw->hw_info1 == 0) {
+	if (qh->hw == NULL) {
 		ehci_vdbg (ehci, "iso delay\n");
 		goto idle_timeout;
 	}
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 39340ae00ac4..a0aaaaff2560 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -1123,8 +1123,8 @@ iso_stream_find (struct ehci_hcd *ehci, struct urb *urb)
 					urb->interval);
 		}
 
-	/* if dev->ep [epnum] is a QH, info1.maxpacket is nonzero */
-	} else if (unlikely (stream->hw_info1 != 0)) {
+	/* if dev->ep [epnum] is a QH, hw is set */
+	} else if (unlikely (stream->hw != NULL)) {
 		ehci_dbg (ehci, "dev %s ep%d%s, not iso??\n",
 			urb->dev->devpath, epnum,
 			usb_pipein(urb->pipe) ? "in" : "out");
@@ -1565,13 +1565,27 @@ itd_patch(
 static inline void
 itd_link (struct ehci_hcd *ehci, unsigned frame, struct ehci_itd *itd)
 {
-	/* always prepend ITD/SITD ... only QH tree is order-sensitive */
-	itd->itd_next = ehci->pshadow [frame];
-	itd->hw_next = ehci->periodic [frame];
-	ehci->pshadow [frame].itd = itd;
+	union ehci_shadow	*prev = &ehci->pshadow[frame];
+	__hc32			*hw_p = &ehci->periodic[frame];
+	union ehci_shadow	here = *prev;
+	__hc32			type = 0;
+
+	/* skip any iso nodes which might belong to previous microframes */
+	while (here.ptr) {
+		type = Q_NEXT_TYPE(ehci, *hw_p);
+		if (type == cpu_to_hc32(ehci, Q_TYPE_QH))
+			break;
+		prev = periodic_next_shadow(ehci, prev, type);
+		hw_p = shadow_next_periodic(ehci, &here, type);
+		here = *prev;
+	}
+
+	itd->itd_next = here;
+	itd->hw_next = *hw_p;
+	prev->itd = itd;
 	itd->frame = frame;
 	wmb ();
-	ehci->periodic[frame] = cpu_to_hc32(ehci, itd->itd_dma | Q_TYPE_ITD);
+	*hw_p = cpu_to_hc32(ehci, itd->itd_dma | Q_TYPE_ITD);
 }
 
 /* fit urb's itds into the selected schedule slot; activate as needed */
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 2d85e21ff282..b1dce96dd621 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -394,9 +394,8 @@ struct ehci_iso_sched {
  * acts like a qh would, if EHCI had them for ISO.
  */
 struct ehci_iso_stream {
-	/* first two fields match QH, but info1 == 0 */
-	__hc32			hw_next;
-	__hc32			hw_info1;
+	/* first field matches ehci_hq, but is NULL */
+	struct ehci_qh_hw	*hw;
 
 	u32			refcount;
 	u8			bEndpointAddress;
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index bee558aed427..f71a73a93d0c 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -418,7 +418,7 @@ static u8 alloc_usb_address(struct r8a66597 *r8a66597, struct urb *urb)
 
 /* this function must be called with interrupt disabled */
 static void free_usb_address(struct r8a66597 *r8a66597,
-			     struct r8a66597_device *dev)
+			     struct r8a66597_device *dev, int reset)
 {
 	int port;
 
@@ -430,7 +430,13 @@ static void free_usb_address(struct r8a66597 *r8a66597,
 	dev->state = USB_STATE_DEFAULT;
 	r8a66597->address_map &= ~(1 << dev->address);
 	dev->address = 0;
-	dev_set_drvdata(&dev->udev->dev, NULL);
+	/*
+	 * Only when resetting USB, it is necessary to erase drvdata. When
+	 * a usb device with usb hub is disconnect, "dev->udev" is already
+	 * freed on usb_desconnect(). So we cannot access the data.
+	 */
+	if (reset)
+		dev_set_drvdata(&dev->udev->dev, NULL);
 	list_del(&dev->device_list);
 	kfree(dev);
 
@@ -1069,7 +1075,7 @@ static void r8a66597_usb_disconnect(struct r8a66597 *r8a66597, int port)
 	struct r8a66597_device *dev = r8a66597->root_hub[port].dev;
 
 	disable_r8a66597_pipe_all(r8a66597, dev);
-	free_usb_address(r8a66597, dev);
+	free_usb_address(r8a66597, dev, 0);
 
 	start_root_hub_sampling(r8a66597, port, 0);
 }
@@ -2085,7 +2091,7 @@ static void update_usb_address_map(struct r8a66597 *r8a66597,
 				spin_lock_irqsave(&r8a66597->lock, flags);
 				dev = get_r8a66597_device(r8a66597, addr);
 				disable_r8a66597_pipe_all(r8a66597, dev);
-				free_usb_address(r8a66597, dev);
+				free_usb_address(r8a66597, dev, 0);
 				put_child_connect_map(r8a66597, addr);
 				spin_unlock_irqrestore(&r8a66597->lock, flags);
 			}
@@ -2228,7 +2234,7 @@ static int r8a66597_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			rh->port |= (1 << USB_PORT_FEAT_RESET);
 
 			disable_r8a66597_pipe_all(r8a66597, dev);
-			free_usb_address(r8a66597, dev);
+			free_usb_address(r8a66597, dev, 1);
 
 			r8a66597_mdfy(r8a66597, USBRST, USBRST | UACT,
 				      get_dvstctr_reg(port));
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 49f7d72f8b1b..bba9b19ed1b9 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -566,8 +566,13 @@ static inline unsigned int xhci_get_endpoint_interval(struct usb_device *udev,
 			if (interval < 3)
 				interval = 3;
 			if ((1 << interval) != 8*ep->desc.bInterval)
-				dev_warn(&udev->dev, "ep %#x - rounding interval to %d microframes\n",
-						ep->desc.bEndpointAddress, 1 << interval);
+				dev_warn(&udev->dev,
+						"ep %#x - rounding interval"
+						" to %d microframes, "
+						"ep desc says %d microframes\n",
+						ep->desc.bEndpointAddress,
+						1 << interval,
+						8*ep->desc.bInterval);
 		}
 		break;
 	default:
diff --git a/drivers/usb/host/xhci-hcd.c b/drivers/usb/host/xhci.c
index 4cb69e0af834..492a61c2c79d 100644
--- a/drivers/usb/host/xhci-hcd.c
+++ b/drivers/usb/host/xhci.c
@@ -1173,6 +1173,7 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
 		cmd_completion = &virt_dev->cmd_completion;
 		cmd_status = &virt_dev->cmd_status;
 	}
+	init_completion(cmd_completion);
 
 	if (!ctx_change)
 		ret = xhci_queue_configure_endpoint(xhci, in_ctx->dma,
diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c
index 4d2952f1fb13..3adab041355a 100644
--- a/drivers/usb/misc/appledisplay.c
+++ b/drivers/usb/misc/appledisplay.c
@@ -202,6 +202,7 @@ static void appledisplay_work(struct work_struct *work)
 static int appledisplay_probe(struct usb_interface *iface,
 	const struct usb_device_id *id)
 {
+	struct backlight_properties props;
 	struct appledisplay *pdata;
 	struct usb_device *udev = interface_to_usbdev(iface);
 	struct usb_host_interface *iface_desc;
@@ -279,16 +280,16 @@ static int appledisplay_probe(struct usb_interface *iface,
 	/* Register backlight device */
 	snprintf(bl_name, sizeof(bl_name), "appledisplay%d",
 		atomic_inc_return(&count_displays) - 1);
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.max_brightness = 0xff;
 	pdata->bd = backlight_device_register(bl_name, NULL, pdata,
-						&appledisplay_bl_data);
+					      &appledisplay_bl_data, &props);
 	if (IS_ERR(pdata->bd)) {
 		dev_err(&iface->dev, "Backlight registration failed\n");
 		retval = PTR_ERR(pdata->bd);
 		goto error;
 	}
 
-	pdata->bd->props.max_brightness = 0xff;
-
 	/* Try to get brightness */
 	brightness = appledisplay_bl_get_brightness(pdata->bd);
 
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 66913811af5e..a883f9dd3f8a 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -274,7 +274,7 @@ static irqreturn_t davinci_interrupt(int irq, void *__hci)
 	/* NOTE: DaVinci shadows the Mentor IRQs.  Don't manage them through
 	 * the Mentor registers (except for setup), use the TI ones and EOI.
 	 *
-	 * Docs describe irq "vector" registers asociated with the CPPI and
+	 * Docs describe irq "vector" registers associated with the CPPI and
 	 * USB EOI registers.  These hold a bitmask corresponding to the
 	 * current IRQ, not an irq handler address.  Would using those bits
 	 * resolve some of the races observed in this dispatch code??
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index b4bbf8f2c238..0e8b8ab1d168 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -379,7 +379,6 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 				u8 devctl, u8 power)
 {
 	irqreturn_t handled = IRQ_NONE;
-	void __iomem *mbase = musb->mregs;
 
 	DBG(3, "<== Power=%02x, DevCtl=%02x, int_usb=0x%x\n", power, devctl,
 		int_usb);
@@ -394,6 +393,8 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 
 		if (devctl & MUSB_DEVCTL_HM) {
 #ifdef CONFIG_USB_MUSB_HDRC_HCD
+			void __iomem *mbase = musb->mregs;
+
 			switch (musb->xceiv->state) {
 			case OTG_STATE_A_SUSPEND:
 				/* remote wakeup?  later, GetPortStatus
@@ -471,6 +472,8 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 #ifdef CONFIG_USB_MUSB_HDRC_HCD
 	/* see manual for the order of the tests */
 	if (int_usb & MUSB_INTR_SESSREQ) {
+		void __iomem *mbase = musb->mregs;
+
 		DBG(1, "SESSION_REQUEST (%s)\n", otg_state_string(musb));
 
 		/* IRQ arrives from ID pin sense or (later, if VBUS power
@@ -519,6 +522,8 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 		case OTG_STATE_A_WAIT_BCON:
 		case OTG_STATE_A_WAIT_VRISE:
 			if (musb->vbuserr_retry) {
+				void __iomem *mbase = musb->mregs;
+
 				musb->vbuserr_retry--;
 				ignore = 1;
 				devctl |= MUSB_DEVCTL_SESSION;
@@ -622,6 +627,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 
 	if (int_usb & MUSB_INTR_CONNECT) {
 		struct usb_hcd *hcd = musb_to_hcd(musb);
+		void __iomem *mbase = musb->mregs;
 
 		handled = IRQ_HANDLED;
 		musb->is_active = 1;
@@ -2007,7 +2013,6 @@ bad_config:
 	/* host side needs more setup */
 	if (is_host_enabled(musb)) {
 		struct usb_hcd	*hcd = musb_to_hcd(musb);
-		u8 busctl;
 
 		otg_set_host(musb->xceiv, &hcd->self);
 
@@ -2018,9 +2023,9 @@ bad_config:
 
 		/* program PHY to use external vBus if required */
 		if (plat->extvbus) {
-			busctl = musb_readb(musb->mregs, MUSB_ULPI_BUSCONTROL);
+			u8 busctl = musb_read_ulpi_buscontrol(musb->mregs);
 			busctl |= MUSB_ULPI_USE_EXTVBUS;
-			musb_writeb(musb->mregs, MUSB_ULPI_BUSCONTROL, busctl);
+			musb_write_ulpi_buscontrol(musb->mregs, busctl);
 		}
 	}
 
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index d849fb81c131..cd9f4a9a06c6 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -469,7 +469,7 @@ struct musb_csr_regs {
 
 struct musb_context_registers {
 
-#if defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP2430)
+#ifdef CONFIG_PM
 	u32 otg_sysconfig, otg_forcestandby;
 #endif
 	u8 power;
@@ -483,7 +483,7 @@ struct musb_context_registers {
 	struct musb_csr_regs index_regs[MUSB_C_NUM_EPS];
 };
 
-#if defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP2430)
+#ifdef CONFIG_PM
 extern void musb_platform_save_context(struct musb *musb,
 		struct musb_context_registers *musb_context);
 extern void musb_platform_restore_context(struct musb *musb,
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 3421cf9858b5..dec896e888db 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -1689,7 +1689,7 @@ void musb_host_rx(struct musb *musb, u8 epnum)
 				dma->desired_mode = 1;
 			if (rx_count < hw_ep->max_packet_sz_rx) {
 				length = rx_count;
-				dma->bDesiredMode = 0;
+				dma->desired_mode = 0;
 			} else {
 				length = urb->transfer_buffer_length;
 			}
diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h
index 292894a2c247..fa55aacc385d 100644
--- a/drivers/usb/musb/musb_regs.h
+++ b/drivers/usb/musb/musb_regs.h
@@ -326,6 +326,11 @@ static inline void  musb_write_rxfifoadd(void __iomem *mbase, u16 c_off)
 	musb_writew(mbase, MUSB_RXFIFOADD, c_off);
 }
 
+static inline void musb_write_ulpi_buscontrol(void __iomem *mbase, u8 val)
+{
+	musb_writeb(mbase, MUSB_ULPI_BUSCONTROL, val);
+}
+
 static inline u8 musb_read_txfifosz(void __iomem *mbase)
 {
 	return musb_readb(mbase, MUSB_TXFIFOSZ);
@@ -346,6 +351,11 @@ static inline u16  musb_read_rxfifoadd(void __iomem *mbase)
 	return musb_readw(mbase, MUSB_RXFIFOADD);
 }
 
+static inline u8 musb_read_ulpi_buscontrol(void __iomem *mbase)
+{
+	return musb_readb(mbase, MUSB_ULPI_BUSCONTROL);
+}
+
 static inline u8 musb_read_configdata(void __iomem *mbase)
 {
 	musb_writeb(mbase, MUSB_INDEX, 0);
@@ -491,7 +501,7 @@ static inline u8  musb_read_txhubport(void __iomem *mbase, u8 epnum)
 #define MUSB_FLAT_OFFSET(_epnum, _offset)	\
 	(USB_OFFSET(USB_EP_NI0_TXMAXP) + (0x40 * (_epnum)) + (_offset))
 
-/* Not implemented - HW has seperate Tx/Rx FIFO */
+/* Not implemented - HW has separate Tx/Rx FIFO */
 #define MUSB_TXCSR_MODE			0x0000
 
 static inline void musb_write_txfifosz(void __iomem *mbase, u8 c_size)
@@ -510,20 +520,33 @@ static inline void  musb_write_rxfifoadd(void __iomem *mbase, u16 c_off)
 {
 }
 
+static inline void musb_write_ulpi_buscontrol(void __iomem *mbase, u8 val)
+{
+}
+
 static inline u8 musb_read_txfifosz(void __iomem *mbase)
 {
+	return 0;
 }
 
 static inline u16 musb_read_txfifoadd(void __iomem *mbase)
 {
+	return 0;
 }
 
 static inline u8 musb_read_rxfifosz(void __iomem *mbase)
 {
+	return 0;
 }
 
 static inline u16  musb_read_rxfifoadd(void __iomem *mbase)
 {
+	return 0;
+}
+
+static inline u8 musb_read_ulpi_buscontrol(void __iomem *mbase)
+{
+	return 0;
 }
 
 static inline u8 musb_read_configdata(void __iomem *mbase)
@@ -577,22 +600,27 @@ static inline void  musb_write_txhubport(void __iomem *mbase, u8 epnum,
 
 static inline u8 musb_read_rxfunaddr(void __iomem *mbase, u8 epnum)
 {
+	return 0;
 }
 
 static inline u8 musb_read_rxhubaddr(void __iomem *mbase, u8 epnum)
 {
+	return 0;
 }
 
 static inline u8 musb_read_rxhubport(void __iomem *mbase, u8 epnum)
 {
+	return 0;
 }
 
 static inline u8  musb_read_txfunaddr(void __iomem *mbase, u8 epnum)
 {
+	return 0;
 }
 
 static inline u8  musb_read_txhubaddr(void __iomem *mbase, u8 epnum)
 {
+	return 0;
 }
 
 static inline void  musb_read_txhubport(void __iomem *mbase, u8 epnum)
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index c78b255e3f83..a0ecb42cb33a 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -474,14 +474,14 @@ config USB_SERIAL_OTI6858
 
 config USB_SERIAL_QCAUX
 	tristate "USB Qualcomm Auxiliary Serial Port Driver"
-	---help---
+	help
 	  Say Y here if you want to use the auxiliary serial ports provided
 	  by many modems based on Qualcomm chipsets.  These ports often use
 	  a proprietary protocol called DM and cannot be used for AT- or
 	  PPP-based communication.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called moto_modem.  If unsure, choose N.
+	  module will be called qcaux.  If unsure, choose N.
 
 config USB_SERIAL_QUALCOMM
 	tristate "USB Qualcomm Serial modem"
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index b22ac3258523..f347da2ef00a 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -181,6 +181,7 @@ static int usb_console_setup(struct console *co, char *options)
 	/* The console is special in terms of closing the device so
 	 * indicate this port is now acting as a system console. */
 	port->console = 1;
+	port->port.console = 1;
 
 	mutex_unlock(&serial->disc_mutex);
 	return retval;
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 507382b0a9ed..ec9b0449ccf6 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -313,11 +313,6 @@ static int cp210x_set_config(struct usb_serial_port *port, u8 request,
 		return -EPROTO;
 	}
 
-	/* Single data value */
-	result = usb_control_msg(serial->dev,
-			usb_sndctrlpipe(serial->dev, 0),
-			request, REQTYPE_HOST_TO_DEVICE, data[0],
-			0, NULL, 0, 300);
 	return 0;
 }
 
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index baf74b44e6ed..e23c77925e7a 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -152,7 +152,7 @@ struct cypress_private {
 	int isthrottled;		   /* if throttled, discard reads */
 	wait_queue_head_t delta_msr_wait;  /* used for TIOCMIWAIT */
 	char prev_status, diff_status;	   /* used for TIOCMIWAIT */
-	/* we pass a pointer to this as the arguement sent to
+	/* we pass a pointer to this as the argument sent to
 	   cypress_set_termios old_termios */
 	struct ktermios tmp_termios; 	   /* stores the old termios settings */
 };
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 6af0dfa5f5ac..1d7c4fac02e8 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -91,7 +91,7 @@ struct ftdi_private {
 	unsigned long tx_outstanding_bytes;
 	unsigned long tx_outstanding_urbs;
 	unsigned short max_packet_size;
-	struct mutex cfg_lock; /* Avoid mess by parallel calls of config ioctl() */
+	struct mutex cfg_lock; /* Avoid mess by parallel calls of config ioctl() and change_speed() */
 };
 
 /* struct ftdi_sio_quirk is used by devices requiring special attention. */
@@ -658,6 +658,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) },
 	{ USB_DEVICE(EVOLUTION_VID, EVO_HYBRID_PID) },
 	{ USB_DEVICE(EVOLUTION_VID, EVO_RCM4_PID) },
+	{ USB_DEVICE(CONTEC_VID, CONTEC_COM1USBH_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ARTEMIS_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16C_PID) },
@@ -1272,8 +1273,8 @@ check_and_exit:
 	     (priv->flags & ASYNC_SPD_MASK)) ||
 	    (((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) &&
 	     (old_priv.custom_divisor != priv->custom_divisor))) {
-		mutex_unlock(&priv->cfg_lock);
 		change_speed(tty, port);
+		mutex_unlock(&priv->cfg_lock);
 	}
 	else
 		mutex_unlock(&priv->cfg_lock);
@@ -2264,9 +2265,11 @@ static void ftdi_set_termios(struct tty_struct *tty,
 		clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
 	} else {
 		/* set the baudrate determined before */
+		mutex_lock(&priv->cfg_lock);
 		if (change_speed(tty, port))
 			dev_err(&port->dev, "%s urb failed to set baudrate\n",
 				__func__);
+		mutex_unlock(&priv->cfg_lock);
 		/* Ensure RTS and DTR are raised when baudrate changed from 0 */
 		if (!old_termios || (old_termios->c_cflag & CBAUD) == B0)
 			set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 0727e198503e..75482cbc3998 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -501,6 +501,13 @@
 #define CONTEC_COM1USBH_PID	0x8311	/* COM-1(USB)H */
 
 /*
+ * Contec products (http://www.contec.com)
+ * Submitted by Daniel Sangorrin
+ */
+#define CONTEC_VID		0x06CE	/* Vendor ID */
+#define CONTEC_COM1USBH_PID	0x8311	/* COM-1(USB)H */
+
+/*
  * Definitions for B&B Electronics products.
  */
 #define BANDB_VID		0x0856	/* B&B Electronics Vendor ID */
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 89fac36684c5..f804acb138ec 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -130,7 +130,7 @@ int usb_serial_generic_open(struct tty_struct *tty, struct usb_serial_port *port
 	spin_unlock_irqrestore(&port->lock, flags);
 
 	/* if we have a bulk endpoint, start reading from it */
-	if (serial->num_bulk_in) {
+	if (port->bulk_in_size) {
 		/* Start reading from the device */
 		usb_fill_bulk_urb(port->read_urb, serial->dev,
 				   usb_rcvbulkpipe(serial->dev,
@@ -159,10 +159,10 @@ static void generic_cleanup(struct usb_serial_port *port)
 	dbg("%s - port %d", __func__, port->number);
 
 	if (serial->dev) {
-		/* shutdown any bulk reads that might be going on */
-		if (serial->num_bulk_out)
+		/* shutdown any bulk transfers that might be going on */
+		if (port->bulk_out_size)
 			usb_kill_urb(port->write_urb);
-		if (serial->num_bulk_in)
+		if (port->bulk_in_size)
 			usb_kill_urb(port->read_urb);
 	}
 }
@@ -333,15 +333,15 @@ int usb_serial_generic_write(struct tty_struct *tty,
 
 	dbg("%s - port %d", __func__, port->number);
 
+	/* only do something if we have a bulk out endpoint */
+	if (!port->bulk_out_size)
+		return -ENODEV;
+
 	if (count == 0) {
 		dbg("%s - write request of 0 bytes", __func__);
 		return 0;
 	}
 
-	/* only do something if we have a bulk out endpoint */
-	if (!serial->num_bulk_out)
-		return 0;
-
 	if (serial->type->max_in_flight_urbs)
 		return usb_serial_multi_urb_write(tty, port,
 						  buf, count);
@@ -364,14 +364,19 @@ int usb_serial_generic_write_room(struct tty_struct *tty)
 	int room = 0;
 
 	dbg("%s - port %d", __func__, port->number);
+
+	if (!port->bulk_out_size)
+		return 0;
+
 	spin_lock_irqsave(&port->lock, flags);
 	if (serial->type->max_in_flight_urbs) {
 		if (port->urbs_in_flight < serial->type->max_in_flight_urbs)
 			room = port->bulk_out_size *
 				(serial->type->max_in_flight_urbs -
 				 port->urbs_in_flight);
-	} else if (serial->num_bulk_out)
+	} else {
 		room = kfifo_avail(&port->write_fifo);
+	}
 	spin_unlock_irqrestore(&port->lock, flags);
 
 	dbg("%s - returns %d", __func__, room);
@@ -382,15 +387,18 @@ int usb_serial_generic_chars_in_buffer(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct usb_serial *serial = port->serial;
-	int chars = 0;
 	unsigned long flags;
+	int chars;
 
 	dbg("%s - port %d", __func__, port->number);
 
+	if (!port->bulk_out_size)
+		return 0;
+
 	spin_lock_irqsave(&port->lock, flags);
 	if (serial->type->max_in_flight_urbs)
 		chars = port->tx_bytes_flight;
-	else if (serial->num_bulk_out)
+	else
 		chars = kfifo_len(&port->write_fifo);
 	spin_unlock_irqrestore(&port->lock, flags);
 
@@ -415,11 +423,13 @@ void usb_serial_generic_resubmit_read_urb(struct usb_serial_port *port,
 			   ((serial->type->read_bulk_callback) ?
 			     serial->type->read_bulk_callback :
 			     usb_serial_generic_read_bulk_callback), port);
+
 	result = usb_submit_urb(urb, mem_flags);
-	if (result)
+	if (result && result != -EPERM) {
 		dev_err(&port->dev,
 			"%s - failed resubmitting read urb, error %d\n",
 							__func__, result);
+	}
 }
 EXPORT_SYMBOL_GPL(usb_serial_generic_resubmit_read_urb);
 
@@ -498,23 +508,18 @@ void usb_serial_generic_write_bulk_callback(struct urb *urb)
 		if (port->urbs_in_flight < 0)
 			port->urbs_in_flight = 0;
 		spin_unlock_irqrestore(&port->lock, flags);
-
-		if (status) {
-			dbg("%s - nonzero multi-urb write bulk status "
-				"received: %d", __func__, status);
-			return;
-		}
 	} else {
 		port->write_urb_busy = 0;
 
-		if (status) {
-			dbg("%s - nonzero multi-urb write bulk status "
-				"received: %d", __func__, status);
+		if (status)
 			kfifo_reset_out(&port->write_fifo);
-		} else
+		else
 			usb_serial_generic_write_start(port);
 	}
 
+	if (status)
+		dbg("%s - non-zero urb status: %d", __func__, status);
+
 	usb_serial_port_softint(port);
 }
 EXPORT_SYMBOL_GPL(usb_serial_generic_write_bulk_callback);
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index f37476e22684..701452ae9197 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -115,7 +115,7 @@ static void opticon_bulk_callback(struct urb *urb)
 		}
 	} else {
 		dev_dbg(&priv->udev->dev,
-			"Improper ammount of data received from the device, "
+			"Improper amount of data received from the device, "
 			"%d bytes", urb->actual_length);
 	}
 
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 847b805d63a3..950cb311ca94 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -288,7 +288,9 @@ static int  option_resume(struct usb_serial *serial);
 
 #define QUALCOMM_VENDOR_ID			0x05C6
 
-#define MAXON_VENDOR_ID				0x16d8
+#define CMOTECH_VENDOR_ID			0x16d8
+#define CMOTECH_PRODUCT_6008			0x6008
+#define CMOTECH_PRODUCT_6280			0x6280
 
 #define TELIT_VENDOR_ID				0x1bc7
 #define TELIT_PRODUCT_UC864E			0x1003
@@ -309,6 +311,7 @@ static int  option_resume(struct usb_serial *serial);
 #define DLINK_VENDOR_ID				0x1186
 #define DLINK_PRODUCT_DWM_652			0x3e04
 #define DLINK_PRODUCT_DWM_652_U5		0xce16
+#define DLINK_PRODUCT_DWM_652_U5A		0xce1e
 
 #define QISDA_VENDOR_ID				0x1da5
 #define QISDA_PRODUCT_H21_4512			0x4512
@@ -332,6 +335,24 @@ static int  option_resume(struct usb_serial *serial);
 #define ALCATEL_VENDOR_ID			0x1bbb
 #define ALCATEL_PRODUCT_X060S			0x0000
 
+#define PIRELLI_VENDOR_ID			0x1266
+#define PIRELLI_PRODUCT_C100_1			0x1002
+#define PIRELLI_PRODUCT_C100_2			0x1003
+#define PIRELLI_PRODUCT_1004			0x1004
+#define PIRELLI_PRODUCT_1005			0x1005
+#define PIRELLI_PRODUCT_1006			0x1006
+#define PIRELLI_PRODUCT_1007			0x1007
+#define PIRELLI_PRODUCT_1008			0x1008
+#define PIRELLI_PRODUCT_1009			0x1009
+#define PIRELLI_PRODUCT_100A			0x100a
+#define PIRELLI_PRODUCT_100B			0x100b
+#define PIRELLI_PRODUCT_100C			0x100c
+#define PIRELLI_PRODUCT_100D			0x100d
+#define PIRELLI_PRODUCT_100E			0x100e
+#define PIRELLI_PRODUCT_100F			0x100f
+#define PIRELLI_PRODUCT_1011			0x1011
+#define PIRELLI_PRODUCT_1012			0x1012
+
 /* Airplus products */
 #define AIRPLUS_VENDOR_ID			0x1011
 #define AIRPLUS_PRODUCT_MCD650			0x3198
@@ -547,7 +568,8 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) },
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6000)}, /* ZTE AC8700 */
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
-	{ USB_DEVICE(MAXON_VENDOR_ID, 0x6280) }, /* BP3-USB & BP3-EXT HSDPA */
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6280) }, /* BP3-USB & BP3-EXT HSDPA */
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6008) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864G) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
@@ -659,6 +681,7 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
 	{ USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
 	{ USB_DEVICE(ALINK_VENDOR_ID, DLINK_PRODUCT_DWM_652_U5) }, /* Yes, ALINK_VENDOR_ID */
+	{ USB_DEVICE(ALINK_VENDOR_ID, DLINK_PRODUCT_DWM_652_U5A) },
 	{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4512) },
 	{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4523) },
 	{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4515) },
@@ -666,7 +689,6 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_G450) },
 	{ USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_HSDPA_MINICARD ) }, /* Toshiba 3G HSDPA == Novatel Expedite EU870D MiniCard */
 	{ USB_DEVICE(ALINK_VENDOR_ID, 0x9000) },
-	{ USB_DEVICE(ALINK_VENDOR_ID, 0xce16) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ALINK_VENDOR_ID, ALINK_PRODUCT_3GU, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S) },
 	{ USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) },
@@ -675,6 +697,24 @@ static const struct usb_device_id option_ids[] = {
   	  .driver_info = (kernel_ulong_t)&four_g_w14_blacklist
   	},
 	{ USB_DEVICE(HAIER_VENDOR_ID, HAIER_PRODUCT_CE100) },
+	/* Pirelli  */
+	{ USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_C100_1)},
+	{ USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_C100_2)},
+	{ USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1004)},
+	{ USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1005)},
+	{ USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1006)},
+	{ USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1007)},
+	{ USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1008)},
+	{ USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1009)},
+	{ USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100A)},
+	{ USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100B) },
+	{ USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100C) },
+	{ USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100D) },
+	{ USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100E) },
+	{ USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100F) },
+	{ USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1011)},
+	{ USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1012)},
+
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);
@@ -798,12 +838,19 @@ static int option_probe(struct usb_serial *serial,
 			const struct usb_device_id *id)
 {
 	struct option_intf_private *data;
+
 	/* D-Link DWM 652 still exposes CD-Rom emulation interface in modem mode */
 	if (serial->dev->descriptor.idVendor == DLINK_VENDOR_ID &&
 		serial->dev->descriptor.idProduct == DLINK_PRODUCT_DWM_652 &&
 		serial->interface->cur_altsetting->desc.bInterfaceClass == 0x8)
 		return -ENODEV;
 
+	/* Bandrich modem and AT command interface is 0xff */
+	if ((serial->dev->descriptor.idVendor == BANDRICH_VENDOR_ID ||
+		serial->dev->descriptor.idVendor == PIRELLI_VENDOR_ID) &&
+		serial->interface->cur_altsetting->desc.bInterfaceClass != 0xff)
+		return -ENODEV;
+
 	data = serial->private = kzalloc(sizeof(struct option_intf_private), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 310ff6ec6567..53a2d5a935a2 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -47,6 +47,35 @@ static const struct usb_device_id id_table[] = {
 	{USB_DEVICE(0x05c6, 0x9221)},	/* Generic Gobi QDL device */
 	{USB_DEVICE(0x05c6, 0x9231)},	/* Generic Gobi QDL device */
 	{USB_DEVICE(0x1f45, 0x0001)},	/* Unknown Gobi QDL device */
+	{USB_DEVICE(0x413c, 0x8185)},	/* Dell Gobi 2000 QDL device (N0218, VU936) */
+	{USB_DEVICE(0x413c, 0x8186)},	/* Dell Gobi 2000 Modem device (N0218, VU936) */
+	{USB_DEVICE(0x05c6, 0x9224)},	/* Sony Gobi 2000 QDL device (N0279, VU730) */
+	{USB_DEVICE(0x05c6, 0x9225)},	/* Sony Gobi 2000 Modem device (N0279, VU730) */
+	{USB_DEVICE(0x05c6, 0x9244)},	/* Samsung Gobi 2000 QDL device (VL176) */
+	{USB_DEVICE(0x05c6, 0x9245)},	/* Samsung Gobi 2000 Modem device (VL176) */
+	{USB_DEVICE(0x03f0, 0x241d)},	/* HP Gobi 2000 QDL device (VP412) */
+	{USB_DEVICE(0x03f0, 0x251d)},	/* HP Gobi 2000 Modem device (VP412) */
+	{USB_DEVICE(0x05c6, 0x9214)},	/* Acer Gobi 2000 QDL device (VP413) */
+	{USB_DEVICE(0x05c6, 0x9215)},	/* Acer Gobi 2000 Modem device (VP413) */
+	{USB_DEVICE(0x05c6, 0x9264)},	/* Asus Gobi 2000 QDL device (VR305) */
+	{USB_DEVICE(0x05c6, 0x9265)},	/* Asus Gobi 2000 Modem device (VR305) */
+	{USB_DEVICE(0x05c6, 0x9234)},	/* Top Global Gobi 2000 QDL device (VR306) */
+	{USB_DEVICE(0x05c6, 0x9235)},	/* Top Global Gobi 2000 Modem device (VR306) */
+	{USB_DEVICE(0x05c6, 0x9274)},	/* iRex Technologies Gobi 2000 QDL device (VR307) */
+	{USB_DEVICE(0x05c6, 0x9275)},	/* iRex Technologies Gobi 2000 Modem device (VR307) */
+	{USB_DEVICE(0x1199, 0x9000)},	/* Sierra Wireless Gobi 2000 QDL device (VT773) */
+	{USB_DEVICE(0x1199, 0x9001)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
+	{USB_DEVICE(0x1199, 0x9002)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
+	{USB_DEVICE(0x1199, 0x9003)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
+	{USB_DEVICE(0x1199, 0x9004)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
+	{USB_DEVICE(0x1199, 0x9005)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
+	{USB_DEVICE(0x1199, 0x9006)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
+	{USB_DEVICE(0x1199, 0x9007)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
+	{USB_DEVICE(0x1199, 0x9008)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
+	{USB_DEVICE(0x1199, 0x9009)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
+	{USB_DEVICE(0x1199, 0x900a)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
+	{USB_DEVICE(0x16d8, 0x8001)},	/* CMDTech Gobi 2000 QDL device (VU922) */
+	{USB_DEVICE(0x16d8, 0x8002)},	/* CMDTech Gobi 2000 Modem device (VU922) */
 	{ }				/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, id_table);
diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c
index 72398888858f..ee190cc1757c 100644
--- a/drivers/usb/serial/symbolserial.c
+++ b/drivers/usb/serial/symbolserial.c
@@ -94,7 +94,7 @@ static void symbol_int_callback(struct urb *urb)
 		}
 	} else {
 		dev_dbg(&priv->udev->dev,
-			"Improper ammount of data received from the device, "
+			"Improper amount of data received from the device, "
 			"%d bytes", urb->actual_length);
 	}
 
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 98b549b1cab2..ccf1dbbb87ef 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -374,6 +374,15 @@ UNUSUAL_DEV(  0x04ce, 0x0002, 0x0074, 0x0074,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_FIX_INQUIRY),
 
+/* Reported by Ondrej Zary <linux@rainbow-software.org>
+ * The device reports one sector more and breaks when that sector is accessed
+ */
+UNUSUAL_DEV(  0x04ce, 0x0002, 0x026c, 0x026c,
+		"ScanLogic",
+		"SL11R-IDE",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY),
+
 /* Reported by Kriston Fincher <kriston@airmail.net>
  * Patch submitted by Sean Millichamp <sean@bruenor.org>
  * This is to support the Panasonic PalmCam PV-SD4090
@@ -1380,20 +1389,6 @@ UNUSUAL_DEV(  0x0f19, 0x0105, 0x0100, 0x0100,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
-/* Jeremy Katz <katzj@redhat.com>:
- * The Blackberry Pearl can run in two modes; a usb-storage only mode
- * and a mode that allows access via mass storage and to its database.
- * The berry_charge module will set the device to dual mode and thus we
- * should ignore its native mode if that module is built
- */
-#ifdef CONFIG_USB_BERRY_CHARGE
-UNUSUAL_DEV(  0x0fca, 0x0006, 0x0001, 0x0001,
-		"RIM",
-		"Blackberry Pearl",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
-		US_FL_IGNORE_DEVICE ),
-#endif
-
 /* Reported by Michael Stattmann <michael@stattmann.com> */
 UNUSUAL_DEV(  0x0fce, 0xd008, 0x0000, 0x0000,
 		"Sony Ericsson",
diff --git a/drivers/usb/wusbcore/wusbhc.h b/drivers/usb/wusbcore/wusbhc.h
index fd2fd4e277e1..759cda55f7c3 100644
--- a/drivers/usb/wusbcore/wusbhc.h
+++ b/drivers/usb/wusbcore/wusbhc.h
@@ -198,7 +198,7 @@ struct wusb_port {
  *                 ports) this HC will take. Read-only.
  *
  * @port      	   Array of port status for each fake root port. Guaranteed to
- *                 always be the same lenght during device existence
+ *                 always be the same length during device existence
  *                 [this allows for some unlocked but referenced reading].
  *
  * @mmcies_max	   Max number of Information Elements this HC can send
diff --git a/drivers/uwb/driver.c b/drivers/uwb/driver.c
index da77e41de990..08bd6dbfd4a6 100644
--- a/drivers/uwb/driver.c
+++ b/drivers/uwb/driver.c
@@ -74,13 +74,16 @@
 unsigned long beacon_timeout_ms = 500;
 
 static
-ssize_t beacon_timeout_ms_show(struct class *class, char *buf)
+ssize_t beacon_timeout_ms_show(struct class *class,
+				struct class_attribute *attr,
+				char *buf)
 {
 	return scnprintf(buf, PAGE_SIZE, "%lu\n", beacon_timeout_ms);
 }
 
 static
 ssize_t beacon_timeout_ms_store(struct class *class,
+				struct class_attribute *attr,
 				const char *buf, size_t size)
 {
 	unsigned long bt;
diff --git a/drivers/uwb/hwa-rc.c b/drivers/uwb/hwa-rc.c
index e7eeb63fab23..b409c228f254 100644
--- a/drivers/uwb/hwa-rc.c
+++ b/drivers/uwb/hwa-rc.c
@@ -891,7 +891,7 @@ static int hwarc_post_reset(struct usb_interface *iface)
 }
 
 /** USB device ID's that we handle */
-static struct usb_device_id hwarc_id_table[] = {
+static const struct usb_device_id hwarc_id_table[] = {
 	/* D-Link DUB-1210 */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3d02, 0xe0, 0x01, 0x02),
 	  .driver_info = WUSB_QUIRK_WHCI_CMD_EVT },
diff --git a/drivers/uwb/i1480/dfu/usb.c b/drivers/uwb/i1480/dfu/usb.c
index 0bb665a0c024..a99e211a1b87 100644
--- a/drivers/uwb/i1480/dfu/usb.c
+++ b/drivers/uwb/i1480/dfu/usb.c
@@ -120,8 +120,7 @@ int i1480_usb_write(struct i1480 *i1480, u32 memory_address,
 		result = usb_control_msg(
 			i1480_usb->usb_dev, usb_sndctrlpipe(i1480_usb->usb_dev, 0),
 			0xf0, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			cpu_to_le16(memory_address & 0xffff),
-			cpu_to_le16((memory_address >> 16) & 0xffff),
+			memory_address,	(memory_address >> 16),
 			i1480->cmd_buf, buffer_size, 100 /* FIXME: arbitrary */);
 		if (result < 0)
 			break;
@@ -166,8 +165,7 @@ int i1480_usb_read(struct i1480 *i1480, u32 addr, size_t size)
 		result = usb_control_msg(
 			i1480_usb->usb_dev, usb_rcvctrlpipe(i1480_usb->usb_dev, 0),
 			0xf0, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			cpu_to_le16(itr_addr & 0xffff),
-			cpu_to_le16((itr_addr >> 16) & 0xffff),
+			itr_addr, (itr_addr >> 16),
 			i1480->cmd_buf + itr, itr_size,
 			100 /* FIXME: arbitrary */);
 		if (result < 0) {
@@ -413,6 +411,10 @@ error:
 	return result;
 }
 
+MODULE_FIRMWARE("i1480-pre-phy-0.0.bin");
+MODULE_FIRMWARE("i1480-usb-0.0.bin");
+MODULE_FIRMWARE("i1480-phy-0.0.bin");
+
 #define i1480_USB_DEV(v, p)				\
 {							\
 	.match_flags = USB_DEVICE_ID_MATCH_DEVICE	\
@@ -430,7 +432,7 @@ error:
 
 
 /** USB device ID's that we handle */
-static struct usb_device_id i1480_usb_id_table[] = {
+static const struct usb_device_id i1480_usb_id_table[] = {
 	i1480_USB_DEV(0x8086, 0xdf3b),
 	i1480_USB_DEV(0x15a9, 0x0005),
 	i1480_USB_DEV(0x07d1, 0x3802),
diff --git a/drivers/uwb/i1480/i1480-est.c b/drivers/uwb/i1480/i1480-est.c
index 7bf8c6febae7..f2eb4d8b76c9 100644
--- a/drivers/uwb/i1480/i1480-est.c
+++ b/drivers/uwb/i1480/i1480-est.c
@@ -54,7 +54,7 @@ static struct uwb_est_entry i1480_est_fd01[] = {
 		.size = sizeof(struct i1480_rceb) + 2 },
 };
 
-static int i1480_est_init(void)
+static int __init i1480_est_init(void)
 {
 	int result = uwb_est_register(i1480_CET_VS1, 0x00, 0x8086, 0x0c3b,
 				      i1480_est_fd00,
@@ -73,7 +73,7 @@ static int i1480_est_init(void)
 }
 module_init(i1480_est_init);
 
-static void i1480_est_exit(void)
+static void __exit i1480_est_exit(void)
 {
 	uwb_est_unregister(i1480_CET_VS1, 0x00, 0x8086, 0x0c3b,
 			   i1480_est_fd00, ARRAY_SIZE(i1480_est_fd00));
diff --git a/drivers/uwb/umc-bus.c b/drivers/uwb/umc-bus.c
index cdd6c8efc9f8..5fad4e791b3e 100644
--- a/drivers/uwb/umc-bus.c
+++ b/drivers/uwb/umc-bus.c
@@ -62,12 +62,12 @@ int umc_controller_reset(struct umc_dev *umc)
 	struct device *parent = umc->dev.parent;
 	int ret = 0;
 
-	if(down_trylock(&parent->sem))
+	if (device_trylock(parent))
 		return -EAGAIN;
 	ret = device_for_each_child(parent, parent, umc_bus_pre_reset_helper);
 	if (ret >= 0)
 		ret = device_for_each_child(parent, parent, umc_bus_post_reset_helper);
-	up(&parent->sem);
+	device_unlock(parent);
 
 	return ret;
 }
diff --git a/drivers/uwb/uwb-internal.h b/drivers/uwb/uwb-internal.h
index d5bcfc1c227a..157485c862c0 100644
--- a/drivers/uwb/uwb-internal.h
+++ b/drivers/uwb/uwb-internal.h
@@ -366,12 +366,12 @@ struct dentry *uwb_dbg_create_pal_dir(struct uwb_pal *pal);
 
 static inline void uwb_dev_lock(struct uwb_dev *uwb_dev)
 {
-	down(&uwb_dev->dev.sem);
+	device_lock(&uwb_dev->dev);
 }
 
 static inline void uwb_dev_unlock(struct uwb_dev *uwb_dev)
 {
-	up(&uwb_dev->dev.sem);
+	device_unlock(&uwb_dev->dev);
 }
 
 #endif /* #ifndef __UWB_INTERNAL_H__ */
diff --git a/drivers/uwb/uwbd.c b/drivers/uwb/uwbd.c
index 5a777d8624da..6210fe1fd1bb 100644
--- a/drivers/uwb/uwbd.c
+++ b/drivers/uwb/uwbd.c
@@ -43,7 +43,7 @@
  *
  * EVENTS
  *
- * Events have a type, a subtype, a lenght, some other stuff and the
+ * Events have a type, a subtype, a length, some other stuff and the
  * data blob, which depends on the event. The header is 'struct
  * uwb_event'; for payloads, see 'struct uwbd_evt_*'.
  *
diff --git a/drivers/uwb/wlp/messages.c b/drivers/uwb/wlp/messages.c
index aa42fcee4c4f..75164866c2d8 100644
--- a/drivers/uwb/wlp/messages.c
+++ b/drivers/uwb/wlp/messages.c
@@ -259,6 +259,63 @@ out:
 }
 
 
+static ssize_t wlp_get_attribute(struct wlp *wlp, u16 type_code,
+	struct wlp_attr_hdr *attr_hdr, void *value, ssize_t value_len,
+	ssize_t buflen)
+{
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+	ssize_t attr_len = sizeof(*attr_hdr) + value_len;
+	if (buflen < 0)
+		return -EINVAL;
+	if (buflen < attr_len) {
+		dev_err(dev, "WLP: Not enough space in buffer to parse"
+			" attribute field. Need %d, received %zu\n",
+			(int)attr_len, buflen);
+		return -EIO;
+	}
+	if (wlp_check_attr_hdr(wlp, attr_hdr, type_code, value_len) < 0) {
+		dev_err(dev, "WLP: Header verification failed. \n");
+		return -EINVAL;
+	}
+	memcpy(value, (void *)attr_hdr + sizeof(*attr_hdr), value_len);
+	return attr_len;
+}
+
+static ssize_t wlp_vget_attribute(struct wlp *wlp, u16 type_code,
+	struct wlp_attr_hdr *attr_hdr, void *value, ssize_t max_value_len,
+	ssize_t buflen)
+{
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+	size_t len;
+	if (buflen < 0)
+		return -EINVAL;
+	if (buflen < sizeof(*attr_hdr)) {
+		dev_err(dev, "WLP: Not enough space in buffer to parse"
+			" header.\n");
+		return -EIO;
+	}
+	if (le16_to_cpu(attr_hdr->type) != type_code) {
+		dev_err(dev, "WLP: Unexpected attribute type. Got %u, "
+			"expected %u.\n", le16_to_cpu(attr_hdr->type),
+			type_code);
+		return -EINVAL;
+	}
+	len = le16_to_cpu(attr_hdr->length);
+	if (len > max_value_len) {
+		dev_err(dev, "WLP: Attribute larger than maximum "
+			"allowed. Received %zu, max is %d.\n", len,
+			(int)max_value_len);
+		return -EFBIG;
+	}
+	if (buflen < sizeof(*attr_hdr) + len) {
+		dev_err(dev, "WLP: Not enough space in buffer to parse "
+			"variable data.\n");
+		return -EIO;
+	}
+	memcpy(value, (void *)attr_hdr + sizeof(*attr_hdr), len);
+	return sizeof(*attr_hdr) + len;
+}
+
 /**
  * Get value of attribute from fixed size attribute field.
  *
@@ -274,22 +331,8 @@ out:
 ssize_t wlp_get_##name(struct wlp *wlp, struct wlp_attr_##name *attr,	\
 		      type *value, ssize_t buflen)			\
 {									\
-	struct device *dev = &wlp->rc->uwb_dev.dev;			\
-	if (buflen < 0)							\
-		return -EINVAL;						\
-	if (buflen < sizeof(*attr)) {					\
-		dev_err(dev, "WLP: Not enough space in buffer to parse"	\
-			" attribute field. Need %d, received %zu\n",	\
-			(int)sizeof(*attr), buflen);			\
-		return -EIO;						\
-	}								\
-	if (wlp_check_attr_hdr(wlp, &attr->hdr, type_code,		\
-			       sizeof(attr->name)) < 0) {		\
-		dev_err(dev, "WLP: Header verification failed. \n");	\
-		return -EINVAL;						\
-	}								\
-	*value = attr->name;						\
-	return sizeof(*attr);						\
+	return wlp_get_attribute(wlp, (type_code), &attr->hdr,		\
+				 value, sizeof(*value), buflen);	\
 }
 
 #define wlp_get_sparse(type, type_code, name) \
@@ -313,35 +356,8 @@ static ssize_t wlp_get_##name(struct wlp *wlp,				\
 			      struct wlp_attr_##name *attr,		\
 			      type_val *value, ssize_t buflen)		\
 {									\
-	struct device *dev = &wlp->rc->uwb_dev.dev;			\
-	size_t len;							\
-	if (buflen < 0)							\
-		return -EINVAL;						\
-	if (buflen < sizeof(*attr)) {					\
-		dev_err(dev, "WLP: Not enough space in buffer to parse"	\
-			" header.\n");					\
-		return -EIO;						\
-	}								\
-	if (le16_to_cpu(attr->hdr.type) != type_code) {			\
-		dev_err(dev, "WLP: Unexpected attribute type. Got %u, "	\
-			"expected %u.\n", le16_to_cpu(attr->hdr.type),	\
-			type_code);					\
-		return -EINVAL;						\
-	}								\
-	len = le16_to_cpu(attr->hdr.length);				\
-	if (len > max) {						\
-		dev_err(dev, "WLP: Attribute larger than maximum "	\
-			"allowed. Received %zu, max is %d.\n", len,	\
-			(int)max);					\
-		return -EFBIG;						\
-	}								\
-	if (buflen < sizeof(*attr) + len) {				\
-		dev_err(dev, "WLP: Not enough space in buffer to parse "\
-			"variable data.\n");				\
-		return -EIO;						\
-	}								\
-	memcpy(value, (void *) attr + sizeof(*attr), len);		\
-	return sizeof(*attr) + len;					\
+	return wlp_vget_attribute(wlp, (type_code), &attr->hdr, 	\
+			      value, (max), buflen);			\
 }
 
 wlp_get(u8, WLP_ATTR_WLP_VER, version)
diff --git a/drivers/uwb/wlp/sysfs.c b/drivers/uwb/wlp/sysfs.c
index 0370399ff4bb..6627c94cc854 100644
--- a/drivers/uwb/wlp/sysfs.c
+++ b/drivers/uwb/wlp/sysfs.c
@@ -615,8 +615,7 @@ ssize_t wlp_wss_attr_store(struct kobject *kobj, struct attribute *attr,
 	return ret;
 }
 
-static
-struct sysfs_ops wss_sysfs_ops = {
+static const struct sysfs_ops wss_sysfs_ops = {
 	.show	= wlp_wss_attr_show,
 	.store	= wlp_wss_attr_store,
 };
diff --git a/drivers/video/68328fb.c b/drivers/video/68328fb.c
index 0b17824b0eb5..2110556f76b3 100644
--- a/drivers/video/68328fb.c
+++ b/drivers/video/68328fb.c
@@ -308,7 +308,7 @@ static int mc68x328fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
 	 * Pseudocolor:
 	 *    uses offset = 0 && length = RAMDAC register width.
 	 *    var->{color}.offset is 0
-	 *    var->{color}.length contains widht of DAC
+	 *    var->{color}.length contains width of DAC
 	 *    cmap is not used
 	 *    RAMDAC[X] is programmed to (red, green, blue)
 	 * Truecolor:
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 5a5c303a6373..6e16244f3ed1 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -400,9 +400,12 @@ config FB_SA1100
 	  If you plan to use the LCD display with your SA-1100 system, say
 	  Y here.
 
+config HAVE_FB_IMX
+	bool
+
 config FB_IMX
 	tristate "Motorola i.MX LCD support"
-	depends on FB && (ARCH_MX1 || ARCH_MX2)
+	depends on FB && (HAVE_FB_IMX || ARCH_MX1 || ARCH_MX2)
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
@@ -909,6 +912,18 @@ config FB_XVR2500
 	  mostly initialized the card already.  It is treated as a
 	  completely dumb framebuffer device.
 
+config FB_XVR1000
+	bool "Sun XVR-1000 support"
+	depends on (FB = y) && SPARC64
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the framebuffer device for the Sun XVR-1000 and similar
+	  graphics cards.  The driver only works on sparc64 systems where
+	  the system firmware has mostly initialized the card already.  It
+	  is treated as a completely dumb framebuffer device.
+
 config FB_PVR2
 	tristate "NEC PowerVR 2 display support"
 	depends on FB && SH_DREAMCAST
@@ -1494,7 +1509,6 @@ config FB_VIA
        select FB_CFB_FILLRECT
        select FB_CFB_COPYAREA
        select FB_CFB_IMAGEBLIT
-       select FB_SOFT_CURSOR
        select I2C_ALGOBIT
        select I2C
        help
@@ -1867,7 +1881,7 @@ config FB_W100
 
 config FB_SH_MOBILE_LCDC
 	tristate "SuperH Mobile LCDC framebuffer support"
-	depends on FB && SUPERH && HAVE_CLK
+	depends on FB && (SUPERH || ARCH_SHMOBILE) && HAVE_CLK
 	select FB_SYS_FILLRECT
 	select FB_SYS_COPYAREA
 	select FB_SYS_IMAGEBLIT
@@ -1945,6 +1959,27 @@ config FB_S3C2410_DEBUG
 	  Turn on debugging messages. Note that you can set/unset at run time
 	  through sysfs
 
+config FB_NUC900
+        bool "NUC900 LCD framebuffer support"
+        depends on FB && ARCH_W90X900
+        select FB_CFB_FILLRECT
+        select FB_CFB_COPYAREA
+        select FB_CFB_IMAGEBLIT
+        ---help---
+          Frame buffer driver for the built-in LCD controller in the Nuvoton
+          NUC900 processor
+
+config GPM1040A0_320X240
+        bool "Giantplus Technology GPM1040A0 320x240 Color TFT LCD"
+        depends on FB_NUC900
+
+config FB_NUC900_DEBUG
+        bool "NUC900 lcd debug messages"
+        depends on FB_NUC900
+        help
+          Turn on debugging messages. Note that you can set/unset at run time
+          through sysfs
+
 config FB_SM501
 	tristate "Silicon Motion SM501 framebuffer support"
 	depends on FB && MFD_SM501
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 4ecb30c4f3f2..ddc2af2ba45b 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -79,6 +79,7 @@ obj-$(CONFIG_FB_N411)             += n411.o
 obj-$(CONFIG_FB_HGA)              += hgafb.o
 obj-$(CONFIG_FB_XVR500)           += sunxvr500.o
 obj-$(CONFIG_FB_XVR2500)          += sunxvr2500.o
+obj-$(CONFIG_FB_XVR1000)          += sunxvr1000.o
 obj-$(CONFIG_FB_IGA)              += igafb.o
 obj-$(CONFIG_FB_APOLLO)           += dnfb.o
 obj-$(CONFIG_FB_Q40)              += q40fb.o
@@ -129,6 +130,7 @@ obj-$(CONFIG_XEN_FBDEV_FRONTEND)  += xen-fbfront.o
 obj-$(CONFIG_FB_CARMINE)          += carminefb.o
 obj-$(CONFIG_FB_MB862XX)	  += mb862xx/
 obj-$(CONFIG_FB_MSM)              += msm/
+obj-$(CONFIG_FB_NUC900)           += nuc900fb.o
 
 # Platform or fallback drivers go here
 obj-$(CONFIG_FB_UVESA)            += uvesafb.o
diff --git a/drivers/video/acornfb.c b/drivers/video/acornfb.c
index 0bcc59eb37fa..43d7d5067361 100644
--- a/drivers/video/acornfb.c
+++ b/drivers/video/acornfb.c
@@ -1221,7 +1221,7 @@ free_unused_pages(unsigned int virtual_start, unsigned int virtual_end)
 	printk("acornfb: freed %dK memory\n", mb_freed);
 }
 
-static int __init acornfb_probe(struct platform_device *dev)
+static int __devinit acornfb_probe(struct platform_device *dev)
 {
 	unsigned long size;
 	u_int h_sync, v_sync;
diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c
index a21efcd10b78..afe21e6eb544 100644
--- a/drivers/video/amba-clcd.c
+++ b/drivers/video/amba-clcd.c
@@ -65,16 +65,16 @@ static void clcdfb_disable(struct clcd_fb *fb)
 	if (fb->board->disable)
 		fb->board->disable(fb);
 
-	val = readl(fb->regs + CLCD_CNTL);
+	val = readl(fb->regs + fb->off_cntl);
 	if (val & CNTL_LCDPWR) {
 		val &= ~CNTL_LCDPWR;
-		writel(val, fb->regs + CLCD_CNTL);
+		writel(val, fb->regs + fb->off_cntl);
 
 		clcdfb_sleep(20);
 	}
 	if (val & CNTL_LCDEN) {
 		val &= ~CNTL_LCDEN;
-		writel(val, fb->regs + CLCD_CNTL);
+		writel(val, fb->regs + fb->off_cntl);
 	}
 
 	/*
@@ -94,7 +94,7 @@ static void clcdfb_enable(struct clcd_fb *fb, u32 cntl)
 	 * Bring up by first enabling..
 	 */
 	cntl |= CNTL_LCDEN;
-	writel(cntl, fb->regs + CLCD_CNTL);
+	writel(cntl, fb->regs + fb->off_cntl);
 
 	clcdfb_sleep(20);
 
@@ -102,7 +102,7 @@ static void clcdfb_enable(struct clcd_fb *fb, u32 cntl)
 	 * and now apply power.
 	 */
 	cntl |= CNTL_LCDPWR;
-	writel(cntl, fb->regs + CLCD_CNTL);
+	writel(cntl, fb->regs + fb->off_cntl);
 
 	/*
 	 * finally, enable the interface.
@@ -233,7 +233,7 @@ static int clcdfb_set_par(struct fb_info *info)
 		readl(fb->regs + CLCD_TIM0), readl(fb->regs + CLCD_TIM1),
 		readl(fb->regs + CLCD_TIM2), readl(fb->regs + CLCD_TIM3),
 		readl(fb->regs + CLCD_UBAS), readl(fb->regs + CLCD_LBAS),
-		readl(fb->regs + CLCD_IENB), readl(fb->regs + CLCD_CNTL));
+		readl(fb->regs + fb->off_ienb), readl(fb->regs + fb->off_cntl));
 #endif
 
 	return 0;
@@ -345,6 +345,23 @@ static int clcdfb_register(struct clcd_fb *fb)
 {
 	int ret;
 
+	/*
+	 * ARM PL111 always has IENB at 0x1c; it's only PL110
+	 * which is reversed on some platforms.
+	 */
+	if (amba_manf(fb->dev) == 0x41 && amba_part(fb->dev) == 0x111) {
+		fb->off_ienb = CLCD_PL111_IENB;
+		fb->off_cntl = CLCD_PL111_CNTL;
+	} else {
+#ifdef CONFIG_ARCH_VERSATILE
+		fb->off_ienb = CLCD_PL111_IENB;
+		fb->off_cntl = CLCD_PL111_CNTL;
+#else
+		fb->off_ienb = CLCD_PL110_IENB;
+		fb->off_cntl = CLCD_PL110_CNTL;
+#endif
+	}
+
 	fb->clk = clk_get(&fb->dev->dev, NULL);
 	if (IS_ERR(fb->clk)) {
 		ret = PTR_ERR(fb->clk);
@@ -416,7 +433,7 @@ static int clcdfb_register(struct clcd_fb *fb)
 	/*
 	 * Ensure interrupts are disabled.
 	 */
-	writel(0, fb->regs + CLCD_IENB);
+	writel(0, fb->regs + fb->off_ienb);
 
 	fb_set_var(&fb->fb, &fb->fb.var);
 
diff --git a/drivers/video/arcfb.c b/drivers/video/arcfb.c
index c3431691c9f2..01554d696528 100644
--- a/drivers/video/arcfb.c
+++ b/drivers/video/arcfb.c
@@ -504,7 +504,7 @@ static struct fb_ops arcfb_ops = {
 	.fb_ioctl 	= arcfb_ioctl,
 };
 
-static int __init arcfb_probe(struct platform_device *dev)
+static int __devinit arcfb_probe(struct platform_device *dev)
 {
 	struct fb_info *info;
 	int retval = -ENOMEM;
diff --git a/drivers/video/asiliantfb.c b/drivers/video/asiliantfb.c
index 9fe90ce928fb..e70bc225fe31 100644
--- a/drivers/video/asiliantfb.c
+++ b/drivers/video/asiliantfb.c
@@ -140,7 +140,7 @@ static void asiliant_calc_dclk2(u32 *ppixclock, u8 *dclk2_m, u8 *dclk2_n, u8 *dc
 
 		/* 3 <= m <= 257 */
 		if (m >= 3 && m <= 257) {
-			unsigned new_error = ((Ftarget * n) - (Fref * m)) >= 0 ?
+			unsigned new_error = Ftarget * n >= Fref * m ?
 					       ((Ftarget * n) - (Fref * m)) : ((Fref * m) - (Ftarget * n));
 			if (new_error < best_error) {
 				best_n = n;
@@ -152,7 +152,7 @@ static void asiliant_calc_dclk2(u32 *ppixclock, u8 *dclk2_m, u8 *dclk2_n, u8 *dc
 		else if (m <= 1028) {
 			/* remember there are still only 8-bits of precision in m, so
 			 * avoid over-optimistic error calculations */
-			unsigned new_error = ((Ftarget * n) - (Fref * (m & ~3))) >= 0 ?
+			unsigned new_error = Ftarget * n >= Fref * (m & ~3) ?
 					       ((Ftarget * n) - (Fref * (m & ~3))) : ((Fref * (m & ~3)) - (Ftarget * n));
 			if (new_error < best_error) {
 				best_n = n;
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 3d886c6902f9..11de3bfd4e54 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -117,6 +117,7 @@ static struct backlight_ops atmel_lcdc_bl_ops = {
 
 static void init_backlight(struct atmel_lcdfb_info *sinfo)
 {
+	struct backlight_properties props;
 	struct backlight_device	*bl;
 
 	sinfo->bl_power = FB_BLANK_UNBLANK;
@@ -124,8 +125,10 @@ static void init_backlight(struct atmel_lcdfb_info *sinfo)
 	if (sinfo->backlight)
 		return;
 
-	bl = backlight_device_register("backlight", &sinfo->pdev->dev,
-			sinfo, &atmel_lcdc_bl_ops);
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.max_brightness = 0xff;
+	bl = backlight_device_register("backlight", &sinfo->pdev->dev, sinfo,
+				       &atmel_lcdc_bl_ops, &props);
 	if (IS_ERR(bl)) {
 		dev_err(&sinfo->pdev->dev, "error %ld on backlight register\n",
 				PTR_ERR(bl));
@@ -135,7 +138,6 @@ static void init_backlight(struct atmel_lcdfb_info *sinfo)
 
 	bl->props.power = FB_BLANK_UNBLANK;
 	bl->props.fb_blank = FB_BLANK_UNBLANK;
-	bl->props.max_brightness = 0xff;
 	bl->props.brightness = atmel_bl_get_brightness(bl);
 }
 
diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c
index 9ee67d6da710..a489be0c4614 100644
--- a/drivers/video/aty/aty128fb.c
+++ b/drivers/video/aty/aty128fb.c
@@ -1802,6 +1802,7 @@ static void aty128_bl_set_power(struct fb_info *info, int power)
 
 static void aty128_bl_init(struct aty128fb_par *par)
 {
+	struct backlight_properties props;
 	struct fb_info *info = pci_get_drvdata(par->pdev);
 	struct backlight_device *bd;
 	char name[12];
@@ -1817,7 +1818,10 @@ static void aty128_bl_init(struct aty128fb_par *par)
 
 	snprintf(name, sizeof(name), "aty128bl%d", info->node);
 
-	bd = backlight_device_register(name, info->dev, par, &aty128_bl_data);
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.max_brightness = FB_BACKLIGHT_LEVELS - 1;
+	bd = backlight_device_register(name, info->dev, par, &aty128_bl_data,
+				       &props);
 	if (IS_ERR(bd)) {
 		info->bl_dev = NULL;
 		printk(KERN_WARNING "aty128: Backlight registration failed\n");
@@ -1829,7 +1833,6 @@ static void aty128_bl_init(struct aty128fb_par *par)
 		 63 * FB_BACKLIGHT_MAX / MAX_LEVEL,
 		219 * FB_BACKLIGHT_MAX / MAX_LEVEL);
 
-	bd->props.max_brightness = FB_BACKLIGHT_LEVELS - 1;
 	bd->props.brightness = bd->props.max_brightness;
 	bd->props.power = FB_BLANK_UNBLANK;
 	backlight_update_status(bd);
diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
index e45ab8db2ddc..29d72851f85b 100644
--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/aty/atyfb_base.c
@@ -2232,6 +2232,7 @@ static struct backlight_ops aty_bl_data = {
 
 static void aty_bl_init(struct atyfb_par *par)
 {
+	struct backlight_properties props;
 	struct fb_info *info = pci_get_drvdata(par->pdev);
 	struct backlight_device *bd;
 	char name[12];
@@ -2243,7 +2244,10 @@ static void aty_bl_init(struct atyfb_par *par)
 
 	snprintf(name, sizeof(name), "atybl%d", info->node);
 
-	bd = backlight_device_register(name, info->dev, par, &aty_bl_data);
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.max_brightness = FB_BACKLIGHT_LEVELS - 1;
+	bd = backlight_device_register(name, info->dev, par, &aty_bl_data,
+				       &props);
 	if (IS_ERR(bd)) {
 		info->bl_dev = NULL;
 		printk(KERN_WARNING "aty: Backlight registration failed\n");
@@ -2255,7 +2259,6 @@ static void aty_bl_init(struct atyfb_par *par)
 			    0x3F * FB_BACKLIGHT_MAX / MAX_LEVEL,
 			    0xFF * FB_BACKLIGHT_MAX / MAX_LEVEL);
 
-	bd->props.max_brightness = FB_BACKLIGHT_LEVELS - 1;
 	bd->props.brightness = bd->props.max_brightness;
 	bd->props.power = FB_BLANK_UNBLANK;
 	backlight_update_status(bd);
diff --git a/drivers/video/aty/radeon_backlight.c b/drivers/video/aty/radeon_backlight.c
index fa1198c4ccc5..9fc8c66be3ce 100644
--- a/drivers/video/aty/radeon_backlight.c
+++ b/drivers/video/aty/radeon_backlight.c
@@ -134,6 +134,7 @@ static struct backlight_ops radeon_bl_data = {
 
 void radeonfb_bl_init(struct radeonfb_info *rinfo)
 {
+	struct backlight_properties props;
 	struct backlight_device *bd;
 	struct radeon_bl_privdata *pdata;
 	char name[12];
@@ -155,7 +156,10 @@ void radeonfb_bl_init(struct radeonfb_info *rinfo)
 
 	snprintf(name, sizeof(name), "radeonbl%d", rinfo->info->node);
 
-	bd = backlight_device_register(name, rinfo->info->dev, pdata, &radeon_bl_data);
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.max_brightness = FB_BACKLIGHT_LEVELS - 1;
+	bd = backlight_device_register(name, rinfo->info->dev, pdata,
+				       &radeon_bl_data, &props);
 	if (IS_ERR(bd)) {
 		rinfo->info->bl_dev = NULL;
 		printk("radeonfb: Backlight registration failed\n");
@@ -185,7 +189,6 @@ void radeonfb_bl_init(struct radeonfb_info *rinfo)
 		 63 * FB_BACKLIGHT_MAX / MAX_RADEON_LEVEL,
 		217 * FB_BACKLIGHT_MAX / MAX_RADEON_LEVEL);
 
-	bd->props.max_brightness = FB_BACKLIGHT_LEVELS - 1;
 	bd->props.brightness = bd->props.max_brightness;
 	bd->props.power = FB_BLANK_UNBLANK;
 	backlight_update_status(bd);
diff --git a/drivers/video/backlight/88pm860x_bl.c b/drivers/video/backlight/88pm860x_bl.c
index b8f705cca438..93e25c77aeb2 100644
--- a/drivers/video/backlight/88pm860x_bl.c
+++ b/drivers/video/backlight/88pm860x_bl.c
@@ -187,6 +187,7 @@ static int pm860x_backlight_probe(struct platform_device *pdev)
 	struct pm860x_backlight_data *data;
 	struct backlight_device *bl;
 	struct resource *res;
+	struct backlight_properties props;
 	unsigned char value;
 	char name[MFD_NAME_SIZE];
 	int ret;
@@ -223,14 +224,15 @@ static int pm860x_backlight_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.max_brightness = MAX_BRIGHTNESS;
 	bl = backlight_device_register(name, &pdev->dev, data,
-					&pm860x_backlight_ops);
+					&pm860x_backlight_ops, &props);
 	if (IS_ERR(bl)) {
 		dev_err(&pdev->dev, "failed to register backlight\n");
 		kfree(data);
 		return PTR_ERR(bl);
 	}
-	bl->props.max_brightness = MAX_BRIGHTNESS;
 	bl->props.brightness = MAX_BRIGHTNESS;
 
 	platform_set_drvdata(pdev, bl);
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 0c77fc610212..c025c84601b0 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -31,6 +31,13 @@ config LCD_CORGI
 	  Say y here to support the LCD panels usually found on SHARP
 	  corgi (C7x0) and spitz (Cxx00) models.
 
+config LCD_L4F00242T03
+	tristate "Epson L4F00242T03 LCD"
+	depends on LCD_CLASS_DEVICE && SPI_MASTER && GENERIC_GPIO
+	help
+	  SPI driver for Epson L4F00242T03. This provides basic support
+	  for init and powering the LCD up/down through a sysfs interface.
+
 config LCD_LMS283GF05
 	tristate "Samsung LMS283GF05 LCD"
 	depends on LCD_CLASS_DEVICE && SPI_MASTER && GENERIC_GPIO
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index 6c704d41462d..09d1f14d6257 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -3,6 +3,7 @@
 obj-$(CONFIG_LCD_CLASS_DEVICE)     += lcd.o
 obj-$(CONFIG_LCD_CORGI)		   += corgi_lcd.o
 obj-$(CONFIG_LCD_HP700)		   += jornada720_lcd.o
+obj-$(CONFIG_LCD_L4F00242T03)	   += l4f00242t03.o
 obj-$(CONFIG_LCD_LMS283GF05)	   += lms283gf05.o
 obj-$(CONFIG_LCD_LTV350QV)	   += ltv350qv.o
 obj-$(CONFIG_LCD_ILI9320)	   += ili9320.o
diff --git a/drivers/video/backlight/adp5520_bl.c b/drivers/video/backlight/adp5520_bl.c
index 86d95c228adb..5183f0e4d314 100644
--- a/drivers/video/backlight/adp5520_bl.c
+++ b/drivers/video/backlight/adp5520_bl.c
@@ -278,6 +278,7 @@ static const struct attribute_group adp5520_bl_attr_group = {
 
 static int __devinit adp5520_bl_probe(struct platform_device *pdev)
 {
+	struct backlight_properties props;
 	struct backlight_device *bl;
 	struct adp5520_bl *data;
 	int ret = 0;
@@ -300,17 +301,17 @@ static int __devinit adp5520_bl_probe(struct platform_device *pdev)
 
 	mutex_init(&data->lock);
 
-	bl = backlight_device_register(pdev->name, data->master,
-			data, &adp5520_bl_ops);
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.max_brightness = ADP5020_MAX_BRIGHTNESS;
+	bl = backlight_device_register(pdev->name, data->master, data,
+				       &adp5520_bl_ops, &props);
 	if (IS_ERR(bl)) {
 		dev_err(&pdev->dev, "failed to register backlight\n");
 		kfree(data);
 		return PTR_ERR(bl);
 	}
 
-	bl->props.max_brightness =
-		bl->props.brightness = ADP5020_MAX_BRIGHTNESS;
-
+	bl->props.brightness = ADP5020_MAX_BRIGHTNESS;
 	if (data->pdata->en_ambl_sens)
 		ret = sysfs_create_group(&bl->dev.kobj,
 			&adp5520_bl_attr_group);
diff --git a/drivers/video/backlight/adx_bl.c b/drivers/video/backlight/adx_bl.c
index d769b0bab21a..b0624b983889 100644
--- a/drivers/video/backlight/adx_bl.c
+++ b/drivers/video/backlight/adx_bl.c
@@ -56,7 +56,7 @@ static int adx_backlight_get_brightness(struct backlight_device *bldev)
 	return brightness & 0xff;
 }
 
-static int adx_backlight_check_fb(struct fb_info *fb)
+static int adx_backlight_check_fb(struct backlight_device *bldev, struct fb_info *fb)
 {
 	return 1;
 }
@@ -70,6 +70,7 @@ static const struct backlight_ops adx_backlight_ops = {
 
 static int __devinit adx_backlight_probe(struct platform_device *pdev)
 {
+	struct backlight_properties props;
 	struct backlight_device *bldev;
 	struct resource *res;
 	struct adxbl *bl;
@@ -101,14 +102,15 @@ static int __devinit adx_backlight_probe(struct platform_device *pdev)
 		goto out;
 	}
 
-	bldev = backlight_device_register(dev_name(&pdev->dev), &pdev->dev, bl,
-			&adx_backlight_ops);
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.max_brightness = 0xff;
+	bldev = backlight_device_register(dev_name(&pdev->dev), &pdev->dev,
+					  bl, &adx_backlight_ops, &props);
 	if (!bldev) {
 		ret = -ENOMEM;
 		goto out;
 	}
 
-	bldev->props.max_brightness = 0xff;
 	bldev->props.brightness = 0xff;
 	bldev->props.power = FB_BLANK_UNBLANK;
 
diff --git a/drivers/video/backlight/atmel-pwm-bl.c b/drivers/video/backlight/atmel-pwm-bl.c
index f625ffc69ad3..2d9760551a4b 100644
--- a/drivers/video/backlight/atmel-pwm-bl.c
+++ b/drivers/video/backlight/atmel-pwm-bl.c
@@ -120,6 +120,7 @@ static const struct backlight_ops atmel_pwm_bl_ops = {
 
 static int atmel_pwm_bl_probe(struct platform_device *pdev)
 {
+	struct backlight_properties props;
 	const struct atmel_pwm_bl_platform_data *pdata;
 	struct backlight_device *bldev;
 	struct atmel_pwm_bl *pwmbl;
@@ -165,8 +166,10 @@ static int atmel_pwm_bl_probe(struct platform_device *pdev)
 			goto err_free_gpio;
 	}
 
-	bldev = backlight_device_register("atmel-pwm-bl",
-			&pdev->dev, pwmbl, &atmel_pwm_bl_ops);
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.max_brightness = pdata->pwm_duty_max - pdata->pwm_duty_min;
+	bldev = backlight_device_register("atmel-pwm-bl", &pdev->dev, pwmbl,
+					  &atmel_pwm_bl_ops, &props);
 	if (IS_ERR(bldev)) {
 		retval = PTR_ERR(bldev);
 		goto err_free_gpio;
@@ -178,7 +181,6 @@ static int atmel_pwm_bl_probe(struct platform_device *pdev)
 
 	/* Power up the backlight by default at middle intesity. */
 	bldev->props.power = FB_BLANK_UNBLANK;
-	bldev->props.max_brightness = pdata->pwm_duty_max - pdata->pwm_duty_min;
 	bldev->props.brightness = bldev->props.max_brightness / 2;
 
 	retval = atmel_pwm_bl_init_pwm(pwmbl);
diff --git a/drivers/video/backlight/backlight.c b/drivers/video/backlight/backlight.c
index 18829cf68b1b..68bb838b9f11 100644
--- a/drivers/video/backlight/backlight.c
+++ b/drivers/video/backlight/backlight.c
@@ -38,7 +38,7 @@ static int fb_notifier_callback(struct notifier_block *self,
 	mutex_lock(&bd->ops_lock);
 	if (bd->ops)
 		if (!bd->ops->check_fb ||
-		    bd->ops->check_fb(evdata->info)) {
+		    bd->ops->check_fb(bd, evdata->info)) {
 			bd->props.fb_blank = *(int *)evdata->data;
 			if (bd->props.fb_blank == FB_BLANK_UNBLANK)
 				bd->props.state &= ~BL_CORE_FBBLANK;
@@ -269,7 +269,8 @@ EXPORT_SYMBOL(backlight_force_update);
  * ERR_PTR() or a pointer to the newly allocated device.
  */
 struct backlight_device *backlight_device_register(const char *name,
-		struct device *parent, void *devdata, const struct backlight_ops *ops)
+	struct device *parent, void *devdata, const struct backlight_ops *ops,
+	const struct backlight_properties *props)
 {
 	struct backlight_device *new_bd;
 	int rc;
@@ -289,6 +290,11 @@ struct backlight_device *backlight_device_register(const char *name,
 	dev_set_name(&new_bd->dev, name);
 	dev_set_drvdata(&new_bd->dev, devdata);
 
+	/* Set default properties */
+	if (props)
+		memcpy(&new_bd->props, props,
+		       sizeof(struct backlight_properties));
+
 	rc = device_register(&new_bd->dev);
 	if (rc) {
 		kfree(new_bd);
diff --git a/drivers/video/backlight/corgi_lcd.c b/drivers/video/backlight/corgi_lcd.c
index b4bcf8043797..73bdd8454c94 100644
--- a/drivers/video/backlight/corgi_lcd.c
+++ b/drivers/video/backlight/corgi_lcd.c
@@ -533,6 +533,7 @@ err_free_backlight_on:
 
 static int __devinit corgi_lcd_probe(struct spi_device *spi)
 {
+	struct backlight_properties props;
 	struct corgi_lcd_platform_data *pdata = spi->dev.platform_data;
 	struct corgi_lcd *lcd;
 	int ret = 0;
@@ -559,13 +560,14 @@ static int __devinit corgi_lcd_probe(struct spi_device *spi)
 	lcd->power = FB_BLANK_POWERDOWN;
 	lcd->mode = (pdata) ? pdata->init_mode : CORGI_LCD_MODE_VGA;
 
-	lcd->bl_dev = backlight_device_register("corgi_bl", &spi->dev,
-					lcd, &corgi_bl_ops);
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.max_brightness = pdata->max_intensity;
+	lcd->bl_dev = backlight_device_register("corgi_bl", &spi->dev, lcd,
+						&corgi_bl_ops, &props);
 	if (IS_ERR(lcd->bl_dev)) {
 		ret = PTR_ERR(lcd->bl_dev);
 		goto err_unregister_lcd;
 	}
-	lcd->bl_dev->props.max_brightness = pdata->max_intensity;
 	lcd->bl_dev->props.brightness = pdata->default_intensity;
 	lcd->bl_dev->props.power = FB_BLANK_UNBLANK;
 
diff --git a/drivers/video/backlight/cr_bllcd.c b/drivers/video/backlight/cr_bllcd.c
index da86db4374a0..1cce6031bff2 100644
--- a/drivers/video/backlight/cr_bllcd.c
+++ b/drivers/video/backlight/cr_bllcd.c
@@ -170,6 +170,7 @@ static struct lcd_ops cr_lcd_ops = {
 
 static int cr_backlight_probe(struct platform_device *pdev)
 {
+	struct backlight_properties props;
 	struct backlight_device *bdp;
 	struct lcd_device *ldp;
 	struct cr_panel *crp;
@@ -190,8 +191,9 @@ static int cr_backlight_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	bdp = backlight_device_register("cr-backlight",
-					&pdev->dev, NULL, &cr_backlight_ops);
+	memset(&props, 0, sizeof(struct backlight_properties));
+	bdp = backlight_device_register("cr-backlight", &pdev->dev, NULL,
+					&cr_backlight_ops, &props);
 	if (IS_ERR(bdp)) {
 		pci_dev_put(lpc_dev);
 		return PTR_ERR(bdp);
@@ -220,9 +222,7 @@ static int cr_backlight_probe(struct platform_device *pdev)
 	crp->cr_lcd_device = ldp;
 	crp->cr_backlight_device->props.power = FB_BLANK_UNBLANK;
 	crp->cr_backlight_device->props.brightness = 0;
-	crp->cr_backlight_device->props.max_brightness = 0;
 	cr_backlight_set_intensity(crp->cr_backlight_device);
-
 	cr_lcd_set_power(crp->cr_lcd_device, FB_BLANK_UNBLANK);
 
 	platform_set_drvdata(pdev, crp);
diff --git a/drivers/video/backlight/da903x_bl.c b/drivers/video/backlight/da903x_bl.c
index 74cdc640173d..686e4a789238 100644
--- a/drivers/video/backlight/da903x_bl.c
+++ b/drivers/video/backlight/da903x_bl.c
@@ -105,6 +105,7 @@ static int da903x_backlight_probe(struct platform_device *pdev)
 	struct da9034_backlight_pdata *pdata = pdev->dev.platform_data;
 	struct da903x_backlight_data *data;
 	struct backlight_device *bl;
+	struct backlight_properties props;
 	int max_brightness;
 
 	data = kzalloc(sizeof(*data), GFP_KERNEL);
@@ -134,15 +135,15 @@ static int da903x_backlight_probe(struct platform_device *pdev)
 		da903x_write(data->da903x_dev, DA9034_WLED_CONTROL2,
 				DA9034_WLED_ISET(pdata->output_current));
 
-	bl = backlight_device_register(pdev->name, data->da903x_dev,
-			data, &da903x_backlight_ops);
+	props.max_brightness = max_brightness;
+	bl = backlight_device_register(pdev->name, data->da903x_dev, data,
+				       &da903x_backlight_ops, &props);
 	if (IS_ERR(bl)) {
 		dev_err(&pdev->dev, "failed to register backlight\n");
 		kfree(data);
 		return PTR_ERR(bl);
 	}
 
-	bl->props.max_brightness = max_brightness;
 	bl->props.brightness = max_brightness;
 
 	platform_set_drvdata(pdev, bl);
diff --git a/drivers/video/backlight/generic_bl.c b/drivers/video/backlight/generic_bl.c
index e6d348e63596..312ca619735d 100644
--- a/drivers/video/backlight/generic_bl.c
+++ b/drivers/video/backlight/generic_bl.c
@@ -78,6 +78,7 @@ static const struct backlight_ops genericbl_ops = {
 
 static int genericbl_probe(struct platform_device *pdev)
 {
+	struct backlight_properties props;
 	struct generic_bl_info *machinfo = pdev->dev.platform_data;
 	const char *name = "generic-bl";
 	struct backlight_device *bd;
@@ -89,14 +90,15 @@ static int genericbl_probe(struct platform_device *pdev)
 	if (machinfo->name)
 		name = machinfo->name;
 
-	bd = backlight_device_register (name,
-		&pdev->dev, NULL, &genericbl_ops);
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.max_brightness = machinfo->max_intensity;
+	bd = backlight_device_register(name, &pdev->dev, NULL, &genericbl_ops,
+				       &props);
 	if (IS_ERR (bd))
 		return PTR_ERR (bd);
 
 	platform_set_drvdata(pdev, bd);
 
-	bd->props.max_brightness = machinfo->max_intensity;
 	bd->props.power = FB_BLANK_UNBLANK;
 	bd->props.brightness = machinfo->default_intensity;
 	backlight_update_status(bd);
diff --git a/drivers/video/backlight/hp680_bl.c b/drivers/video/backlight/hp680_bl.c
index f7cc528d5be7..267d23f8d645 100644
--- a/drivers/video/backlight/hp680_bl.c
+++ b/drivers/video/backlight/hp680_bl.c
@@ -105,16 +105,18 @@ static const struct backlight_ops hp680bl_ops = {
 
 static int __devinit hp680bl_probe(struct platform_device *pdev)
 {
+	struct backlight_properties props;
 	struct backlight_device *bd;
 
-	bd = backlight_device_register ("hp680-bl", &pdev->dev, NULL,
-		    &hp680bl_ops);
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.max_brightness = HP680_MAX_INTENSITY;
+	bd = backlight_device_register("hp680-bl", &pdev->dev, NULL,
+				       &hp680bl_ops, &props);
 	if (IS_ERR(bd))
 		return PTR_ERR(bd);
 
 	platform_set_drvdata(pdev, bd);
 
-	bd->props.max_brightness = HP680_MAX_INTENSITY;
 	bd->props.brightness = HP680_DEFAULT_INTENSITY;
 	hp680bl_send_intensity(bd);
 
diff --git a/drivers/video/backlight/jornada720_bl.c b/drivers/video/backlight/jornada720_bl.c
index db9071fc5665..2f177b3a4885 100644
--- a/drivers/video/backlight/jornada720_bl.c
+++ b/drivers/video/backlight/jornada720_bl.c
@@ -101,10 +101,14 @@ static const struct backlight_ops jornada_bl_ops = {
 
 static int jornada_bl_probe(struct platform_device *pdev)
 {
+	struct backlight_properties props;
 	int ret;
 	struct backlight_device *bd;
 
-	bd = backlight_device_register(S1D_DEVICENAME, &pdev->dev, NULL, &jornada_bl_ops);
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.max_brightness = BL_MAX_BRIGHT;
+	bd = backlight_device_register(S1D_DEVICENAME, &pdev->dev, NULL,
+				       &jornada_bl_ops, &props);
 
 	if (IS_ERR(bd)) {
 		ret = PTR_ERR(bd);
@@ -117,7 +121,6 @@ static int jornada_bl_probe(struct platform_device *pdev)
 	/* note. make sure max brightness is set otherwise
 	   you will get seemingly non-related errors when
 	   trying to change brightness */
-	bd->props.max_brightness = BL_MAX_BRIGHT;
 	jornada_bl_update_status(bd);
 
 	platform_set_drvdata(pdev, bd);
diff --git a/drivers/video/backlight/kb3886_bl.c b/drivers/video/backlight/kb3886_bl.c
index 939e7b830cf3..f439a8632287 100644
--- a/drivers/video/backlight/kb3886_bl.c
+++ b/drivers/video/backlight/kb3886_bl.c
@@ -141,20 +141,24 @@ static const struct backlight_ops kb3886bl_ops = {
 
 static int kb3886bl_probe(struct platform_device *pdev)
 {
+	struct backlight_properties props;
 	struct kb3886bl_machinfo *machinfo = pdev->dev.platform_data;
 
 	bl_machinfo = machinfo;
 	if (!machinfo->limit_mask)
 		machinfo->limit_mask = -1;
 
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.max_brightness = machinfo->max_intensity;
 	kb3886_backlight_device = backlight_device_register("kb3886-bl",
-		&pdev->dev, NULL, &kb3886bl_ops);
+							    &pdev->dev, NULL,
+							    &kb3886bl_ops,
+							    &props);
 	if (IS_ERR(kb3886_backlight_device))
 		return PTR_ERR(kb3886_backlight_device);
 
 	platform_set_drvdata(pdev, kb3886_backlight_device);
 
-	kb3886_backlight_device->props.max_brightness = machinfo->max_intensity;
 	kb3886_backlight_device->props.power = FB_BLANK_UNBLANK;
 	kb3886_backlight_device->props.brightness = machinfo->default_intensity;
 	backlight_update_status(kb3886_backlight_device);
diff --git a/drivers/video/backlight/l4f00242t03.c b/drivers/video/backlight/l4f00242t03.c
new file mode 100644
index 000000000000..74abd6994b09
--- /dev/null
+++ b/drivers/video/backlight/l4f00242t03.c
@@ -0,0 +1,257 @@
+/*
+ * l4f00242t03.c -- support for Epson L4F00242T03 LCD
+ *
+ * Copyright 2007-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
+ * 	Inspired by Marek Vasut work in l4f00242t03.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/lcd.h>
+#include <linux/regulator/consumer.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/l4f00242t03.h>
+
+struct l4f00242t03_priv {
+	struct spi_device	*spi;
+	struct lcd_device	*ld;
+	int lcd_on:1;
+	struct regulator *io_reg;
+	struct regulator *core_reg;
+};
+
+
+static void l4f00242t03_reset(unsigned int gpio)
+{
+	pr_debug("l4f00242t03_reset.\n");
+	gpio_set_value(gpio, 1);
+	mdelay(100);
+	gpio_set_value(gpio, 0);
+	mdelay(10);	/* tRES >= 100us */
+	gpio_set_value(gpio, 1);
+	mdelay(20);
+}
+
+#define param(x) ((x) | 0x100)
+
+static void l4f00242t03_lcd_init(struct spi_device *spi)
+{
+	struct l4f00242t03_pdata *pdata = spi->dev.platform_data;
+	struct l4f00242t03_priv *priv = dev_get_drvdata(&spi->dev);
+	const u16 cmd[] = { 0x36, param(0), 0x3A, param(0x60) };
+
+	dev_dbg(&spi->dev, "initializing LCD\n");
+
+	if (priv->io_reg) {
+		regulator_set_voltage(priv->io_reg, 1800000, 1800000);
+		regulator_enable(priv->io_reg);
+	}
+
+	if (priv->core_reg) {
+		regulator_set_voltage(priv->core_reg, 2800000, 2800000);
+		regulator_enable(priv->core_reg);
+	}
+
+	gpio_set_value(pdata->data_enable_gpio, 1);
+	msleep(60);
+	spi_write(spi, (const u8 *)cmd, ARRAY_SIZE(cmd) * sizeof(u16));
+}
+
+static int l4f00242t03_lcd_power_set(struct lcd_device *ld, int power)
+{
+	struct l4f00242t03_priv *priv = lcd_get_data(ld);
+	struct spi_device *spi = priv->spi;
+
+	const u16 slpout = 0x11;
+	const u16 dison = 0x29;
+
+	const u16 slpin = 0x10;
+	const u16 disoff = 0x28;
+
+	if (power) {
+		if (priv->lcd_on)
+			return 0;
+
+		dev_dbg(&spi->dev, "turning on LCD\n");
+
+		spi_write(spi, (const u8 *)&slpout, sizeof(u16));
+		msleep(60);
+		spi_write(spi, (const u8 *)&dison, sizeof(u16));
+
+		priv->lcd_on = 1;
+	} else {
+		if (!priv->lcd_on)
+			return 0;
+
+		dev_dbg(&spi->dev, "turning off LCD\n");
+
+		spi_write(spi, (const u8 *)&disoff, sizeof(u16));
+		msleep(60);
+		spi_write(spi, (const u8 *)&slpin, sizeof(u16));
+
+		priv->lcd_on = 0;
+	}
+
+	return 0;
+}
+
+static struct lcd_ops l4f_ops = {
+	.set_power	= l4f00242t03_lcd_power_set,
+	.get_power	= NULL,
+};
+
+static int __devinit l4f00242t03_probe(struct spi_device *spi)
+{
+	struct l4f00242t03_priv *priv;
+	struct l4f00242t03_pdata *pdata = spi->dev.platform_data;
+	int ret;
+
+	if (pdata == NULL) {
+		dev_err(&spi->dev, "Uninitialized platform data.\n");
+		return -EINVAL;
+	}
+
+	priv = kzalloc(sizeof(struct l4f00242t03_priv), GFP_KERNEL);
+
+	if (priv == NULL) {
+		dev_err(&spi->dev, "No memory for this device.\n");
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	dev_set_drvdata(&spi->dev, priv);
+	spi->bits_per_word = 9;
+	spi_setup(spi);
+
+	priv->spi = spi;
+
+	ret = gpio_request(pdata->reset_gpio, "lcd l4f00242t03 reset");
+	if (ret) {
+		dev_err(&spi->dev,
+			"Unable to get the lcd l4f00242t03 reset gpio.\n");
+		return ret;
+	}
+
+	ret = gpio_direction_output(pdata->reset_gpio, 1);
+	if (ret)
+		goto err2;
+
+	ret = gpio_request(pdata->data_enable_gpio,
+				"lcd l4f00242t03 data enable");
+	if (ret) {
+		dev_err(&spi->dev,
+			"Unable to get the lcd l4f00242t03 data en gpio.\n");
+		return ret;
+	}
+
+	ret = gpio_direction_output(pdata->data_enable_gpio, 0);
+	if (ret)
+		goto err3;
+
+	if (pdata->io_supply) {
+		priv->io_reg = regulator_get(NULL, pdata->io_supply);
+
+		if (IS_ERR(priv->io_reg)) {
+			pr_err("%s: Unable to get the IO regulator\n",
+								__func__);
+			goto err3;
+		}
+	}
+
+	if (pdata->core_supply) {
+		priv->core_reg = regulator_get(NULL, pdata->core_supply);
+
+		if (IS_ERR(priv->core_reg)) {
+			pr_err("%s: Unable to get the core regulator\n",
+								__func__);
+			goto err4;
+		}
+	}
+
+	priv->ld = lcd_device_register("l4f00242t03",
+					&spi->dev, priv, &l4f_ops);
+	if (IS_ERR(priv->ld)) {
+		ret = PTR_ERR(priv->ld);
+		goto err5;
+	}
+
+	/* Init the LCD */
+	l4f00242t03_reset(pdata->reset_gpio);
+	l4f00242t03_lcd_init(spi);
+	l4f00242t03_lcd_power_set(priv->ld, 1);
+
+	dev_info(&spi->dev, "Epson l4f00242t03 lcd probed.\n");
+
+	return 0;
+
+err5:
+	if (priv->core_reg)
+		regulator_put(priv->core_reg);
+err4:
+	if (priv->io_reg)
+		regulator_put(priv->io_reg);
+err3:
+	gpio_free(pdata->data_enable_gpio);
+err2:
+	gpio_free(pdata->reset_gpio);
+err:
+	kfree(priv);
+
+	return ret;
+}
+
+static int __devexit l4f00242t03_remove(struct spi_device *spi)
+{
+	struct l4f00242t03_priv *priv = dev_get_drvdata(&spi->dev);
+	struct l4f00242t03_pdata *pdata = priv->spi->dev.platform_data;
+
+	l4f00242t03_lcd_power_set(priv->ld, 0);
+	lcd_device_unregister(priv->ld);
+
+	gpio_free(pdata->data_enable_gpio);
+	gpio_free(pdata->reset_gpio);
+
+	if (priv->io_reg)
+		regulator_put(priv->core_reg);
+	if (priv->core_reg)
+		regulator_put(priv->io_reg);
+
+	kfree(priv);
+
+	return 0;
+}
+
+static struct spi_driver l4f00242t03_driver = {
+	.driver = {
+		.name	= "l4f00242t03",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= l4f00242t03_probe,
+	.remove		= __devexit_p(l4f00242t03_remove),
+};
+
+static __init int l4f00242t03_init(void)
+{
+	return spi_register_driver(&l4f00242t03_driver);
+}
+
+static __exit void l4f00242t03_exit(void)
+{
+	spi_unregister_driver(&l4f00242t03_driver);
+}
+
+module_init(l4f00242t03_init);
+module_exit(l4f00242t03_exit);
+
+MODULE_AUTHOR("Alberto Panizzo <maramaopercheseimorto@gmail.com>");
+MODULE_DESCRIPTION("EPSON L4F00242T03 LCD");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/video/backlight/locomolcd.c b/drivers/video/backlight/locomolcd.c
index 00a9591b0003..7571bc26071e 100644
--- a/drivers/video/backlight/locomolcd.c
+++ b/drivers/video/backlight/locomolcd.c
@@ -167,6 +167,7 @@ static int locomolcd_resume(struct locomo_dev *dev)
 
 static int locomolcd_probe(struct locomo_dev *ldev)
 {
+	struct backlight_properties props;
 	unsigned long flags;
 
 	local_irq_save(flags);
@@ -182,13 +183,16 @@ static int locomolcd_probe(struct locomo_dev *ldev)
 
 	local_irq_restore(flags);
 
-	locomolcd_bl_device = backlight_device_register("locomo-bl", &ldev->dev, NULL, &locomobl_data);
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.max_brightness = 4;
+	locomolcd_bl_device = backlight_device_register("locomo-bl",
+							&ldev->dev, NULL,
+							&locomobl_data, &props);
 
 	if (IS_ERR (locomolcd_bl_device))
 		return PTR_ERR (locomolcd_bl_device);
 
 	/* Set up frontlight so that screen is readable */
-	locomolcd_bl_device->props.max_brightness = 4,
 	locomolcd_bl_device->props.brightness = 2;
 	locomolcd_set_intensity(locomolcd_bl_device);
 
diff --git a/drivers/video/backlight/max8925_bl.c b/drivers/video/backlight/max8925_bl.c
index c267069a52a3..c91adaf492cf 100644
--- a/drivers/video/backlight/max8925_bl.c
+++ b/drivers/video/backlight/max8925_bl.c
@@ -104,6 +104,7 @@ static int __devinit max8925_backlight_probe(struct platform_device *pdev)
 	struct max8925_backlight_pdata *pdata = NULL;
 	struct max8925_backlight_data *data;
 	struct backlight_device *bl;
+	struct backlight_properties props;
 	struct resource *res;
 	char name[MAX8925_NAME_SIZE];
 	unsigned char value;
@@ -133,14 +134,15 @@ static int __devinit max8925_backlight_probe(struct platform_device *pdev)
 	data->chip = chip;
 	data->current_brightness = 0;
 
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.max_brightness = MAX_BRIGHTNESS;
 	bl = backlight_device_register(name, &pdev->dev, data,
-					&max8925_backlight_ops);
+					&max8925_backlight_ops, &props);
 	if (IS_ERR(bl)) {
 		dev_err(&pdev->dev, "failed to register backlight\n");
 		kfree(data);
 		return PTR_ERR(bl);
 	}
-	bl->props.max_brightness = MAX_BRIGHTNESS;
 	bl->props.brightness = MAX_BRIGHTNESS;
 
 	platform_set_drvdata(pdev, bl);
diff --git a/drivers/video/backlight/mbp_nvidia_bl.c b/drivers/video/backlight/mbp_nvidia_bl.c
index 2e78b0784bdc..1b5d3fe6bbbc 100644
--- a/drivers/video/backlight/mbp_nvidia_bl.c
+++ b/drivers/video/backlight/mbp_nvidia_bl.c
@@ -139,6 +139,51 @@ static int mbp_dmi_match(const struct dmi_system_id *id)
 static const struct dmi_system_id __initdata mbp_device_table[] = {
 	{
 		.callback	= mbp_dmi_match,
+		.ident		= "MacBook 1,1",
+		.matches	= {
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MacBook1,1"),
+		},
+		.driver_data	= (void *)&intel_chipset_data,
+	},
+	{
+		.callback	= mbp_dmi_match,
+		.ident		= "MacBook 2,1",
+		.matches	= {
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MacBook2,1"),
+		},
+		.driver_data	= (void *)&intel_chipset_data,
+	},
+	{
+		.callback	= mbp_dmi_match,
+		.ident		= "MacBook 3,1",
+		.matches	= {
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MacBook3,1"),
+		},
+		.driver_data	= (void *)&intel_chipset_data,
+	},
+	{
+		.callback	= mbp_dmi_match,
+		.ident		= "MacBook 4,1",
+		.matches	= {
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MacBook4,1"),
+		},
+		.driver_data	= (void *)&intel_chipset_data,
+	},
+	{
+		.callback	= mbp_dmi_match,
+		.ident		= "MacBook 4,2",
+		.matches	= {
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MacBook4,2"),
+		},
+		.driver_data	= (void *)&intel_chipset_data,
+	},
+	{
+		.callback	= mbp_dmi_match,
 		.ident		= "MacBookPro 3,1",
 		.matches	= {
 			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
@@ -250,6 +295,7 @@ static const struct dmi_system_id __initdata mbp_device_table[] = {
 
 static int __init mbp_init(void)
 {
+	struct backlight_properties props;
 	if (!dmi_check_system(mbp_device_table))
 		return -ENODEV;
 
@@ -257,14 +303,17 @@ static int __init mbp_init(void)
 						"Macbook Pro backlight"))
 		return -ENXIO;
 
-	mbp_backlight_device = backlight_device_register("mbp_backlight",
-					NULL, NULL, &driver_data->backlight_ops);
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.max_brightness = 15;
+	mbp_backlight_device = backlight_device_register("mbp_backlight", NULL,
+							 NULL,
+							 &driver_data->backlight_ops,
+							 &props);
 	if (IS_ERR(mbp_backlight_device)) {
 		release_region(driver_data->iostart, driver_data->iolen);
 		return PTR_ERR(mbp_backlight_device);
 	}
 
-	mbp_backlight_device->props.max_brightness = 15;
 	mbp_backlight_device->props.brightness =
 		driver_data->backlight_ops.get_brightness(mbp_backlight_device);
 	backlight_update_status(mbp_backlight_device);
diff --git a/drivers/video/backlight/omap1_bl.c b/drivers/video/backlight/omap1_bl.c
index a3a7f8938175..333d28e6b062 100644
--- a/drivers/video/backlight/omap1_bl.c
+++ b/drivers/video/backlight/omap1_bl.c
@@ -132,6 +132,7 @@ static const struct backlight_ops omapbl_ops = {
 
 static int omapbl_probe(struct platform_device *pdev)
 {
+	struct backlight_properties props;
 	struct backlight_device *dev;
 	struct omap_backlight *bl;
 	struct omap_backlight_config *pdata = pdev->dev.platform_data;
@@ -143,7 +144,10 @@ static int omapbl_probe(struct platform_device *pdev)
 	if (unlikely(!bl))
 		return -ENOMEM;
 
-	dev = backlight_device_register("omap-bl", &pdev->dev, bl, &omapbl_ops);
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.max_brightness = OMAPBL_MAX_INTENSITY;
+	dev = backlight_device_register("omap-bl", &pdev->dev, bl, &omapbl_ops,
+					&props);
 	if (IS_ERR(dev)) {
 		kfree(bl);
 		return PTR_ERR(dev);
@@ -160,7 +164,6 @@ static int omapbl_probe(struct platform_device *pdev)
 	omap_cfg_reg(PWL);	/* Conflicts with UART3 */
 
 	dev->props.fb_blank = FB_BLANK_UNBLANK;
-	dev->props.max_brightness = OMAPBL_MAX_INTENSITY;
 	dev->props.brightness = pdata->default_intensity;
 	omapbl_update_status(dev);
 
diff --git a/drivers/video/backlight/progear_bl.c b/drivers/video/backlight/progear_bl.c
index 075786e05034..809278c90738 100644
--- a/drivers/video/backlight/progear_bl.c
+++ b/drivers/video/backlight/progear_bl.c
@@ -61,8 +61,10 @@ static const struct backlight_ops progearbl_ops = {
 
 static int progearbl_probe(struct platform_device *pdev)
 {
+	struct backlight_properties props;
 	u8 temp;
 	struct backlight_device *progear_backlight_device;
+	int ret;
 
 	pmu_dev = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101, NULL);
 	if (!pmu_dev) {
@@ -73,28 +75,37 @@ static int progearbl_probe(struct platform_device *pdev)
 	sb_dev = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
 	if (!sb_dev) {
 		printk("ALI 1533 SB not found.\n");
-		pci_dev_put(pmu_dev);
-		return -ENODEV;
+		ret = -ENODEV;
+		goto put_pmu;
 	}
 
 	/*     Set SB_MPS1 to enable brightness control. */
 	pci_read_config_byte(sb_dev, SB_MPS1, &temp);
 	pci_write_config_byte(sb_dev, SB_MPS1, temp | 0x20);
 
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.max_brightness = HW_LEVEL_MAX - HW_LEVEL_MIN;
 	progear_backlight_device = backlight_device_register("progear-bl",
 							     &pdev->dev, NULL,
-							     &progearbl_ops);
-	if (IS_ERR(progear_backlight_device))
-		return PTR_ERR(progear_backlight_device);
+							     &progearbl_ops,
+							     &props);
+	if (IS_ERR(progear_backlight_device)) {
+		ret = PTR_ERR(progear_backlight_device);
+		goto put_sb;
+	}
 
 	platform_set_drvdata(pdev, progear_backlight_device);
 
 	progear_backlight_device->props.power = FB_BLANK_UNBLANK;
 	progear_backlight_device->props.brightness = HW_LEVEL_MAX - HW_LEVEL_MIN;
-	progear_backlight_device->props.max_brightness = HW_LEVEL_MAX - HW_LEVEL_MIN;
 	progearbl_set_intensity(progear_backlight_device);
 
 	return 0;
+put_sb:
+	pci_dev_put(sb_dev);
+put_pmu:
+	pci_dev_put(pmu_dev);
+	return ret;
 }
 
 static int progearbl_remove(struct platform_device *pdev)
diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
index 9d2ec2a1cce8..b89eebc3f77d 100644
--- a/drivers/video/backlight/pwm_bl.c
+++ b/drivers/video/backlight/pwm_bl.c
@@ -65,6 +65,7 @@ static const struct backlight_ops pwm_backlight_ops = {
 
 static int pwm_backlight_probe(struct platform_device *pdev)
 {
+	struct backlight_properties props;
 	struct platform_pwm_backlight_data *data = pdev->dev.platform_data;
 	struct backlight_device *bl;
 	struct pwm_bl_data *pb;
@@ -100,15 +101,16 @@ static int pwm_backlight_probe(struct platform_device *pdev)
 	} else
 		dev_dbg(&pdev->dev, "got pwm for backlight\n");
 
-	bl = backlight_device_register(dev_name(&pdev->dev), &pdev->dev,
-			pb, &pwm_backlight_ops);
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.max_brightness = data->max_brightness;
+	bl = backlight_device_register(dev_name(&pdev->dev), &pdev->dev, pb,
+				       &pwm_backlight_ops, &props);
 	if (IS_ERR(bl)) {
 		dev_err(&pdev->dev, "failed to register backlight\n");
 		ret = PTR_ERR(bl);
 		goto err_bl;
 	}
 
-	bl->props.max_brightness = data->max_brightness;
 	bl->props.brightness = data->dft_brightness;
 	backlight_update_status(bl);
 
diff --git a/drivers/video/backlight/tosa_bl.c b/drivers/video/backlight/tosa_bl.c
index e14ce4d469f5..f57bbf170049 100644
--- a/drivers/video/backlight/tosa_bl.c
+++ b/drivers/video/backlight/tosa_bl.c
@@ -80,6 +80,7 @@ static const struct backlight_ops bl_ops = {
 static int __devinit tosa_bl_probe(struct i2c_client *client,
 		const struct i2c_device_id *id)
 {
+	struct backlight_properties props;
 	struct tosa_bl_data *data = kzalloc(sizeof(struct tosa_bl_data), GFP_KERNEL);
 	int ret = 0;
 	if (!data)
@@ -99,15 +100,16 @@ static int __devinit tosa_bl_probe(struct i2c_client *client,
 	i2c_set_clientdata(client, data);
 	data->i2c = client;
 
-	data->bl = backlight_device_register("tosa-bl", &client->dev,
-			data, &bl_ops);
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.max_brightness = 512 - 1;
+	data->bl = backlight_device_register("tosa-bl", &client->dev, data,
+					     &bl_ops, &props);
 	if (IS_ERR(data->bl)) {
 		ret = PTR_ERR(data->bl);
 		goto err_reg;
 	}
 
 	data->bl->props.brightness = 69;
-	data->bl->props.max_brightness = 512 - 1;
 	data->bl->props.power = FB_BLANK_UNBLANK;
 
 	backlight_update_status(data->bl);
diff --git a/drivers/video/backlight/wm831x_bl.c b/drivers/video/backlight/wm831x_bl.c
index e32add37a203..a4312709fb1b 100644
--- a/drivers/video/backlight/wm831x_bl.c
+++ b/drivers/video/backlight/wm831x_bl.c
@@ -125,6 +125,7 @@ static int wm831x_backlight_probe(struct platform_device *pdev)
 	struct wm831x_backlight_pdata *pdata;
 	struct wm831x_backlight_data *data;
 	struct backlight_device *bl;
+	struct backlight_properties props;
 	int ret, i, max_isel, isink_reg, dcdc_cfg;
 
 	/* We need platform data */
@@ -191,15 +192,15 @@ static int wm831x_backlight_probe(struct platform_device *pdev)
 	data->current_brightness = 0;
 	data->isink_reg = isink_reg;
 
-	bl = backlight_device_register("wm831x", &pdev->dev,
-			data, &wm831x_backlight_ops);
+	props.max_brightness = max_isel;
+	bl = backlight_device_register("wm831x", &pdev->dev, data,
+				       &wm831x_backlight_ops, &props);
 	if (IS_ERR(bl)) {
 		dev_err(&pdev->dev, "failed to register backlight\n");
 		kfree(data);
 		return PTR_ERR(bl);
 	}
 
-	bl->props.max_brightness = max_isel;
 	bl->props.brightness = max_isel;
 
 	platform_set_drvdata(pdev, bl);
diff --git a/drivers/video/bf54x-lq043fb.c b/drivers/video/bf54x-lq043fb.c
index e49ae5edcc00..23b2a8c0dbfc 100644
--- a/drivers/video/bf54x-lq043fb.c
+++ b/drivers/video/bf54x-lq043fb.c
@@ -82,7 +82,6 @@ struct bfin_bf54xfb_info {
 	unsigned char *fb_buffer;	/* RGB Buffer */
 
 	dma_addr_t dma_handle;
-	int lq043_mmap;
 	int lq043_open_cnt;
 	int irq;
 	spinlock_t lock;	/* lock */
@@ -316,7 +315,6 @@ static int bfin_bf54x_fb_release(struct fb_info *info, int user)
 	spin_lock(&fbi->lock);
 
 	fbi->lq043_open_cnt--;
-	fbi->lq043_mmap = 0;
 
 	if (fbi->lq043_open_cnt <= 0) {
 
@@ -374,33 +372,6 @@ static int bfin_bf54x_fb_check_var(struct fb_var_screeninfo *var,
 	return 0;
 }
 
-static int bfin_bf54x_fb_mmap(struct fb_info *info, struct vm_area_struct *vma)
-{
-
-	struct bfin_bf54xfb_info *fbi = info->par;
-
-	if (fbi->lq043_mmap)
-		return -1;
-
-	spin_lock(&fbi->lock);
-	fbi->lq043_mmap = 1;
-	spin_unlock(&fbi->lock);
-
-	vma->vm_start = (unsigned long)(fbi->fb_buffer);
-
-	vma->vm_end = vma->vm_start + info->fix.smem_len;
-	/* For those who don't understand how mmap works, go read
-	 *   Documentation/nommu-mmap.txt.
-	 * For those that do, you will know that the VM_MAYSHARE flag
-	 * must be set in the vma->vm_flags structure on noMMU
-	 *   Other flags can be set, and are documented in
-	 *   include/linux/mm.h
-	 */
-	vma->vm_flags |=  VM_MAYSHARE | VM_SHARED;
-
-	return 0;
-}
-
 int bfin_bf54x_fb_cursor(struct fb_info *info, struct fb_cursor *cursor)
 {
 	if (nocursor)
@@ -452,7 +423,6 @@ static struct fb_ops bfin_bf54x_fb_ops = {
 	.fb_fillrect = cfb_fillrect,
 	.fb_copyarea = cfb_copyarea,
 	.fb_imageblit = cfb_imageblit,
-	.fb_mmap = bfin_bf54x_fb_mmap,
 	.fb_cursor = bfin_bf54x_fb_cursor,
 	.fb_setcolreg = bfin_bf54x_fb_setcolreg,
 };
@@ -463,7 +433,7 @@ static int bl_get_brightness(struct backlight_device *bd)
 	return 0;
 }
 
-static struct backlight_ops bfin_lq043fb_bl_ops = {
+static const struct backlight_ops bfin_lq043fb_bl_ops = {
 	.get_brightness = bl_get_brightness,
 };
 
@@ -531,6 +501,7 @@ static irqreturn_t bfin_bf54x_irq_error(int irq, void *dev_id)
 
 static int __devinit bfin_bf54x_probe(struct platform_device *pdev)
 {
+	struct backlight_properties props;
 	struct bfin_bf54xfb_info *info;
 	struct fb_info *fbinfo;
 	int ret;
@@ -675,10 +646,16 @@ static int __devinit bfin_bf54x_probe(struct platform_device *pdev)
 		goto out8;
 	}
 #ifndef NO_BL_SUPPORT
-	bl_dev =
-	    backlight_device_register("bf54x-bl", NULL, NULL,
-				      &bfin_lq043fb_bl_ops);
-	bl_dev->props.max_brightness = 255;
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.max_brightness = 255;
+	bl_dev = backlight_device_register("bf54x-bl", NULL, NULL,
+					   &bfin_lq043fb_bl_ops, &props);
+	if (IS_ERR(bl_dev)) {
+		printk(KERN_ERR DRIVER_NAME
+			": unable to register backlight.\n");
+		ret = -EINVAL;
+		goto out9;
+	}
 
 	lcd_dev = lcd_device_register(DRIVER_NAME, &pdev->dev, NULL, &bfin_lcd_ops);
 	lcd_dev->props.max_contrast = 255, printk(KERN_INFO "Done.\n");
@@ -686,6 +663,8 @@ static int __devinit bfin_bf54x_probe(struct platform_device *pdev)
 
 	return 0;
 
+out9:
+	unregister_framebuffer(fbinfo);
 out8:
 	free_irq(info->irq, info);
 out7:
diff --git a/drivers/video/bfin-lq035q1-fb.c b/drivers/video/bfin-lq035q1-fb.c
index b690c269784a..03872365a36d 100644
--- a/drivers/video/bfin-lq035q1-fb.c
+++ b/drivers/video/bfin-lq035q1-fb.c
@@ -22,7 +22,6 @@
 #include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
-#include <linux/dma-mapping.h>
 
 #include <asm/blackfin.h>
 #include <asm/irq.h>
diff --git a/drivers/video/bfin-t350mcqb-fb.c b/drivers/video/bfin-t350mcqb-fb.c
index 2549c53b26a0..31a2dec927bb 100644
--- a/drivers/video/bfin-t350mcqb-fb.c
+++ b/drivers/video/bfin-t350mcqb-fb.c
@@ -87,7 +87,6 @@ struct bfin_t350mcqbfb_info {
 	struct device *dev;
 	unsigned char *fb_buffer;	/* RGB Buffer */
 	dma_addr_t dma_handle;
-	int lq043_mmap;
 	int lq043_open_cnt;
 	int irq;
 	spinlock_t lock;	/* lock */
@@ -235,7 +234,6 @@ static int bfin_t350mcqb_fb_release(struct fb_info *info, int user)
 	spin_lock(&fbi->lock);
 
 	fbi->lq043_open_cnt--;
-	fbi->lq043_mmap = 0;
 
 	if (fbi->lq043_open_cnt <= 0) {
 		bfin_t350mcqb_disable_ppi();
@@ -293,32 +291,6 @@ static int bfin_t350mcqb_fb_check_var(struct fb_var_screeninfo *var,
 	return 0;
 }
 
-static int bfin_t350mcqb_fb_mmap(struct fb_info *info, struct vm_area_struct *vma)
-{
-	struct bfin_t350mcqbfb_info *fbi = info->par;
-
-	if (fbi->lq043_mmap)
-		return -1;
-
-	spin_lock(&fbi->lock);
-	fbi->lq043_mmap = 1;
-	spin_unlock(&fbi->lock);
-
-	vma->vm_start = (unsigned long)(fbi->fb_buffer + ACTIVE_VIDEO_MEM_OFFSET);
-
-	vma->vm_end = vma->vm_start + info->fix.smem_len;
-	/* For those who don't understand how mmap works, go read
-	 *   Documentation/nommu-mmap.txt.
-	 * For those that do, you will know that the VM_MAYSHARE flag
-	 * must be set in the vma->vm_flags structure on noMMU
-	 *   Other flags can be set, and are documented in
-	 *   include/linux/mm.h
-	 */
-	vma->vm_flags |= VM_MAYSHARE | VM_SHARED;
-
-	return 0;
-}
-
 int bfin_t350mcqb_fb_cursor(struct fb_info *info, struct fb_cursor *cursor)
 {
 	if (nocursor)
@@ -370,7 +342,6 @@ static struct fb_ops bfin_t350mcqb_fb_ops = {
 	.fb_fillrect = cfb_fillrect,
 	.fb_copyarea = cfb_copyarea,
 	.fb_imageblit = cfb_imageblit,
-	.fb_mmap = bfin_t350mcqb_fb_mmap,
 	.fb_cursor = bfin_t350mcqb_fb_cursor,
 	.fb_setcolreg = bfin_t350mcqb_fb_setcolreg,
 };
@@ -381,7 +352,7 @@ static int bl_get_brightness(struct backlight_device *bd)
 	return 0;
 }
 
-static struct backlight_ops bfin_lq043fb_bl_ops = {
+static const struct backlight_ops bfin_lq043fb_bl_ops = {
 	.get_brightness = bl_get_brightness,
 };
 
@@ -448,6 +419,7 @@ static irqreturn_t bfin_t350mcqb_irq_error(int irq, void *dev_id)
 
 static int __devinit bfin_t350mcqb_probe(struct platform_device *pdev)
 {
+	struct backlight_properties props;
 	struct bfin_t350mcqbfb_info *info;
 	struct fb_info *fbinfo;
 	int ret;
@@ -569,10 +541,16 @@ static int __devinit bfin_t350mcqb_probe(struct platform_device *pdev)
 		goto out8;
 	}
 #ifndef NO_BL_SUPPORT
-	bl_dev =
-	    backlight_device_register("bf52x-bl", NULL, NULL,
-				      &bfin_lq043fb_bl_ops);
-	bl_dev->props.max_brightness = 255;
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.max_brightness = 255;
+	bl_dev = backlight_device_register("bf52x-bl", NULL, NULL,
+					   &bfin_lq043fb_bl_ops, &props);
+	if (IS_ERR(bl_dev)) {
+		printk(KERN_ERR DRIVER_NAME
+			": unable to register backlight.\n");
+		ret = -EINVAL;
+		goto out9;
+	}
 
 	lcd_dev = lcd_device_register(DRIVER_NAME, NULL, &bfin_lcd_ops);
 	lcd_dev->props.max_contrast = 255, printk(KERN_INFO "Done.\n");
@@ -580,6 +558,8 @@ static int __devinit bfin_t350mcqb_probe(struct platform_device *pdev)
 
 	return 0;
 
+out9:
+	unregister_framebuffer(fbinfo);
 out8:
 	free_irq(info->irq, info);
 out7:
diff --git a/drivers/video/broadsheetfb.c b/drivers/video/broadsheetfb.c
index df9ccb901d86..ebda6876d3a9 100644
--- a/drivers/video/broadsheetfb.c
+++ b/drivers/video/broadsheetfb.c
@@ -29,11 +29,65 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/list.h>
+#include <linux/firmware.h>
 #include <linux/uaccess.h>
 
 #include <video/broadsheetfb.h>
 
-/* Display specific information */
+/* track panel specific parameters */
+struct panel_info {
+	int w;
+	int h;
+	u16 sdcfg;
+	u16 gdcfg;
+	u16 lutfmt;
+	u16 fsynclen;
+	u16 fendfbegin;
+	u16 lsynclen;
+	u16 lendlbegin;
+	u16 pixclk;
+};
+
+/* table of panel specific parameters to be indexed into by the board drivers */
+static struct panel_info panel_table[] = {
+	{	/* standard 6" on TFT backplane */
+		.w = 800,
+		.h = 600,
+		.sdcfg = (100 | (1 << 8) | (1 << 9)),
+		.gdcfg = 2,
+		.lutfmt = (4 | (1 << 7)),
+		.fsynclen = 4,
+		.fendfbegin = (10 << 8) | 4,
+		.lsynclen = 10,
+		.lendlbegin = (100 << 8) | 4,
+		.pixclk = 6,
+	},
+	{	/* custom 3.7" flexible on PET or steel */
+		.w = 320,
+		.h = 240,
+		.sdcfg = (67 | (0 << 8) | (0 << 9) | (0 << 10) | (0 << 12)),
+		.gdcfg = 3,
+		.lutfmt = (4 | (1 << 7)),
+		.fsynclen = 0,
+		.fendfbegin = (80 << 8) | 4,
+		.lsynclen = 10,
+		.lendlbegin = (80 << 8) | 20,
+		.pixclk = 14,
+	},
+	{	/* standard 9.7" on TFT backplane */
+		.w = 1200,
+		.h = 825,
+		.sdcfg = (100 | (1 << 8) | (1 << 9) | (0 << 10) | (0 << 12)),
+		.gdcfg = 2,
+		.lutfmt = (4 | (1 << 7)),
+		.fsynclen = 0,
+		.fendfbegin = (4 << 8) | 4,
+		.lsynclen = 4,
+		.lendlbegin = (60 << 8) | 10,
+		.pixclk = 3,
+	},
+};
+
 #define DPY_W 800
 #define DPY_H 600
 
@@ -62,30 +116,30 @@ static struct fb_var_screeninfo broadsheetfb_var __devinitdata = {
 };
 
 /* main broadsheetfb functions */
-static void broadsheet_issue_data(struct broadsheetfb_par *par, u16 data)
+static void broadsheet_gpio_issue_data(struct broadsheetfb_par *par, u16 data)
 {
 	par->board->set_ctl(par, BS_WR, 0);
 	par->board->set_hdb(par, data);
 	par->board->set_ctl(par, BS_WR, 1);
 }
 
-static void broadsheet_issue_cmd(struct broadsheetfb_par *par, u16 data)
+static void broadsheet_gpio_issue_cmd(struct broadsheetfb_par *par, u16 data)
 {
 	par->board->set_ctl(par, BS_DC, 0);
-	broadsheet_issue_data(par, data);
+	broadsheet_gpio_issue_data(par, data);
 }
 
-static void broadsheet_send_command(struct broadsheetfb_par *par, u16 data)
+static void broadsheet_gpio_send_command(struct broadsheetfb_par *par, u16 data)
 {
 	par->board->wait_for_rdy(par);
 
 	par->board->set_ctl(par, BS_CS, 0);
-	broadsheet_issue_cmd(par, data);
+	broadsheet_gpio_issue_cmd(par, data);
 	par->board->set_ctl(par, BS_DC, 1);
 	par->board->set_ctl(par, BS_CS, 1);
 }
 
-static void broadsheet_send_cmdargs(struct broadsheetfb_par *par, u16 cmd,
+static void broadsheet_gpio_send_cmdargs(struct broadsheetfb_par *par, u16 cmd,
 					int argc, u16 *argv)
 {
 	int i;
@@ -93,15 +147,43 @@ static void broadsheet_send_cmdargs(struct broadsheetfb_par *par, u16 cmd,
 	par->board->wait_for_rdy(par);
 
 	par->board->set_ctl(par, BS_CS, 0);
-	broadsheet_issue_cmd(par, cmd);
+	broadsheet_gpio_issue_cmd(par, cmd);
 	par->board->set_ctl(par, BS_DC, 1);
 
 	for (i = 0; i < argc; i++)
-		broadsheet_issue_data(par, argv[i]);
+		broadsheet_gpio_issue_data(par, argv[i]);
 	par->board->set_ctl(par, BS_CS, 1);
 }
 
-static void broadsheet_burst_write(struct broadsheetfb_par *par, int size,
+static void broadsheet_mmio_send_cmdargs(struct broadsheetfb_par *par, u16 cmd,
+				    int argc, u16 *argv)
+{
+	int i;
+
+	par->board->mmio_write(par, BS_MMIO_CMD, cmd);
+
+	for (i = 0; i < argc; i++)
+		par->board->mmio_write(par, BS_MMIO_DATA, argv[i]);
+}
+
+static void broadsheet_send_command(struct broadsheetfb_par *par, u16 data)
+{
+	if (par->board->mmio_write)
+		par->board->mmio_write(par, BS_MMIO_CMD, data);
+	else
+		broadsheet_gpio_send_command(par, data);
+}
+
+static void broadsheet_send_cmdargs(struct broadsheetfb_par *par, u16 cmd,
+				    int argc, u16 *argv)
+{
+	if (par->board->mmio_write)
+		broadsheet_mmio_send_cmdargs(par, cmd, argc, argv);
+	else
+		broadsheet_gpio_send_cmdargs(par, cmd, argc, argv);
+}
+
+static void broadsheet_gpio_burst_write(struct broadsheetfb_par *par, int size,
 					u16 *data)
 {
 	int i;
@@ -121,7 +203,30 @@ static void broadsheet_burst_write(struct broadsheetfb_par *par, int size,
 	par->board->set_ctl(par, BS_CS, 1);
 }
 
-static u16 broadsheet_get_data(struct broadsheetfb_par *par)
+static void broadsheet_mmio_burst_write(struct broadsheetfb_par *par, int size,
+				   u16 *data)
+{
+	int i;
+	u16 tmp;
+
+	for (i = 0; i < size; i++) {
+		tmp = (data[i] & 0x0F) << 4;
+		tmp |= (data[i] & 0x0F00) << 4;
+		par->board->mmio_write(par, BS_MMIO_DATA, tmp);
+	}
+
+}
+
+static void broadsheet_burst_write(struct broadsheetfb_par *par, int size,
+				   u16 *data)
+{
+	if (par->board->mmio_write)
+		broadsheet_mmio_burst_write(par, size, data);
+	else
+		broadsheet_gpio_burst_write(par, size, data);
+}
+
+static u16 broadsheet_gpio_get_data(struct broadsheetfb_par *par)
 {
 	u16 res;
 	/* wait for ready to go hi. (lo is busy) */
@@ -141,7 +246,16 @@ static u16 broadsheet_get_data(struct broadsheetfb_par *par)
 	return res;
 }
 
-static void broadsheet_write_reg(struct broadsheetfb_par *par, u16 reg,
+
+static u16 broadsheet_get_data(struct broadsheetfb_par *par)
+{
+	if (par->board->mmio_read)
+		return par->board->mmio_read(par);
+	else
+		return broadsheet_gpio_get_data(par);
+}
+
+static void broadsheet_gpio_write_reg(struct broadsheetfb_par *par, u16 reg,
 					u16 data)
 {
 	/* wait for ready to go hi. (lo is busy) */
@@ -150,44 +264,541 @@ static void broadsheet_write_reg(struct broadsheetfb_par *par, u16 reg,
 	/* cs lo, dc lo for cmd, we lo for each data, db as usual */
 	par->board->set_ctl(par, BS_CS, 0);
 
-	broadsheet_issue_cmd(par, BS_CMD_WR_REG);
+	broadsheet_gpio_issue_cmd(par, BS_CMD_WR_REG);
 
 	par->board->set_ctl(par, BS_DC, 1);
 
-	broadsheet_issue_data(par, reg);
-	broadsheet_issue_data(par, data);
+	broadsheet_gpio_issue_data(par, reg);
+	broadsheet_gpio_issue_data(par, data);
 
 	par->board->set_ctl(par, BS_CS, 1);
 }
 
+static void broadsheet_mmio_write_reg(struct broadsheetfb_par *par, u16 reg,
+				 u16 data)
+{
+	par->board->mmio_write(par, BS_MMIO_CMD, BS_CMD_WR_REG);
+	par->board->mmio_write(par, BS_MMIO_DATA, reg);
+	par->board->mmio_write(par, BS_MMIO_DATA, data);
+
+}
+
+static void broadsheet_write_reg(struct broadsheetfb_par *par, u16 reg,
+					u16 data)
+{
+	if (par->board->mmio_write)
+		broadsheet_mmio_write_reg(par, reg, data);
+	else
+		broadsheet_gpio_write_reg(par, reg, data);
+}
+
+static void broadsheet_write_reg32(struct broadsheetfb_par *par, u16 reg,
+					u32 data)
+{
+	broadsheet_write_reg(par, reg, cpu_to_le32(data) & 0xFFFF);
+	broadsheet_write_reg(par, reg + 2, (cpu_to_le32(data) >> 16) & 0xFFFF);
+}
+
+
 static u16 broadsheet_read_reg(struct broadsheetfb_par *par, u16 reg)
 {
-	broadsheet_send_command(par, reg);
-	msleep(100);
+	broadsheet_send_cmdargs(par, BS_CMD_RD_REG, 1, &reg);
+	par->board->wait_for_rdy(par);
 	return broadsheet_get_data(par);
 }
 
+/* functions for waveform manipulation */
+static int is_broadsheet_pll_locked(struct broadsheetfb_par *par)
+{
+	return broadsheet_read_reg(par, 0x000A) & 0x0001;
+}
+
+static int broadsheet_setup_plls(struct broadsheetfb_par *par)
+{
+	int retry_count = 0;
+	u16 tmp;
+
+	/* disable arral saemipu mode */
+	broadsheet_write_reg(par, 0x0006, 0x0000);
+
+	broadsheet_write_reg(par, 0x0010, 0x0004);
+	broadsheet_write_reg(par, 0x0012, 0x5949);
+	broadsheet_write_reg(par, 0x0014, 0x0040);
+	broadsheet_write_reg(par, 0x0016, 0x0000);
+
+	do {
+		if (retry_count++ > 100)
+			return -ETIMEDOUT;
+		mdelay(1);
+	} while (!is_broadsheet_pll_locked(par));
+
+	tmp = broadsheet_read_reg(par, 0x0006);
+	tmp &= ~0x1;
+	broadsheet_write_reg(par, 0x0006, tmp);
+
+	return 0;
+}
+
+static int broadsheet_setup_spi(struct broadsheetfb_par *par)
+{
+
+	broadsheet_write_reg(par, 0x0204, ((3 << 3) | 1));
+	broadsheet_write_reg(par, 0x0208, 0x0001);
+
+	return 0;
+}
+
+static int broadsheet_setup_spiflash(struct broadsheetfb_par *par,
+						u16 *orig_sfmcd)
+{
+
+	*orig_sfmcd = broadsheet_read_reg(par, 0x0204);
+	broadsheet_write_reg(par, 0x0208, 0);
+	broadsheet_write_reg(par, 0x0204, 0);
+	broadsheet_write_reg(par, 0x0204, ((3 << 3) | 1));
+
+	return 0;
+}
+
+static int broadsheet_spiflash_wait_for_bit(struct broadsheetfb_par *par,
+						u16 reg, int bitnum, int val,
+						int timeout)
+{
+	u16 tmp;
+
+	do {
+		tmp = broadsheet_read_reg(par, reg);
+		if (((tmp >> bitnum) & 1) == val)
+			return 0;
+		mdelay(1);
+	} while (timeout--);
+
+	return -ETIMEDOUT;
+}
+
+static int broadsheet_spiflash_write_byte(struct broadsheetfb_par *par, u8 data)
+{
+	broadsheet_write_reg(par, 0x0202, (data | 0x100));
+
+	return broadsheet_spiflash_wait_for_bit(par, 0x0206, 3, 0, 100);
+}
+
+static int broadsheet_spiflash_read_byte(struct broadsheetfb_par *par, u8 *data)
+{
+	int err;
+	u16 tmp;
+
+	broadsheet_write_reg(par, 0x0202, 0);
+
+	err = broadsheet_spiflash_wait_for_bit(par, 0x0206, 3, 0, 100);
+	if (err)
+		return err;
+
+	tmp = broadsheet_read_reg(par, 0x200);
+
+	*data = tmp & 0xFF;
+
+	return 0;
+}
+
+static int broadsheet_spiflash_wait_for_status(struct broadsheetfb_par *par,
+								int timeout)
+{
+	u8 tmp;
+	int err;
+
+	do {
+		broadsheet_write_reg(par, 0x0208, 1);
+
+		err = broadsheet_spiflash_write_byte(par, 0x05);
+		if (err)
+			goto failout;
+
+		err = broadsheet_spiflash_read_byte(par, &tmp);
+		if (err)
+			goto failout;
+
+		broadsheet_write_reg(par, 0x0208, 0);
+
+		if (!(tmp & 0x1))
+			return 0;
+
+		mdelay(5);
+	} while (timeout--);
+
+	dev_err(par->info->device, "Timed out waiting for spiflash status\n");
+	return -ETIMEDOUT;
+
+failout:
+	broadsheet_write_reg(par, 0x0208, 0);
+	return err;
+}
+
+static int broadsheet_spiflash_op_on_address(struct broadsheetfb_par *par,
+							u8 op, u32 addr)
+{
+	int i;
+	u8 tmp;
+	int err;
+
+	broadsheet_write_reg(par, 0x0208, 1);
+
+	err = broadsheet_spiflash_write_byte(par, op);
+	if (err)
+		return err;
+
+	for (i = 2; i >= 0; i--) {
+		tmp = ((addr >> (i * 8)) & 0xFF);
+		err = broadsheet_spiflash_write_byte(par, tmp);
+		if (err)
+			return err;
+	}
+
+	return err;
+}
+
+static int broadsheet_verify_spiflash(struct broadsheetfb_par *par,
+						int *flash_type)
+{
+	int err = 0;
+	u8 sig;
+
+	err = broadsheet_spiflash_op_on_address(par, 0xAB, 0x00000000);
+	if (err)
+		goto failout;
+
+	err = broadsheet_spiflash_read_byte(par, &sig);
+	if (err)
+		goto failout;
+
+	if ((sig != 0x10) && (sig != 0x11)) {
+		dev_err(par->info->device, "Unexpected flash type\n");
+		err = -EINVAL;
+		goto failout;
+	}
+
+	*flash_type = sig;
+
+failout:
+	broadsheet_write_reg(par, 0x0208, 0);
+	return err;
+}
+
+static int broadsheet_setup_for_wfm_write(struct broadsheetfb_par *par,
+					u16 *initial_sfmcd, int *flash_type)
+
+{
+	int err;
+
+	err = broadsheet_setup_plls(par);
+	if (err)
+		return err;
+
+	broadsheet_write_reg(par, 0x0106, 0x0203);
+
+	err = broadsheet_setup_spi(par);
+	if (err)
+		return err;
+
+	err = broadsheet_setup_spiflash(par, initial_sfmcd);
+	if (err)
+		return err;
+
+	return broadsheet_verify_spiflash(par, flash_type);
+}
+
+static int broadsheet_spiflash_write_control(struct broadsheetfb_par *par,
+						int mode)
+{
+	int err;
+
+	broadsheet_write_reg(par, 0x0208, 1);
+	if (mode)
+		err = broadsheet_spiflash_write_byte(par, 0x06);
+	else
+		err = broadsheet_spiflash_write_byte(par, 0x04);
+
+	broadsheet_write_reg(par, 0x0208, 0);
+	return err;
+}
+
+static int broadsheet_spiflash_erase_sector(struct broadsheetfb_par *par,
+						int addr)
+{
+	int err;
+
+	broadsheet_spiflash_write_control(par, 1);
+
+	err = broadsheet_spiflash_op_on_address(par, 0xD8, addr);
+
+	broadsheet_write_reg(par, 0x0208, 0);
+
+	if (err)
+		return err;
+
+	err = broadsheet_spiflash_wait_for_status(par, 1000);
+
+	return err;
+}
+
+static int broadsheet_spiflash_read_range(struct broadsheetfb_par *par,
+						int addr, int size, char *data)
+{
+	int err;
+	int i;
+
+	err = broadsheet_spiflash_op_on_address(par, 0x03, addr);
+	if (err)
+		goto failout;
+
+	for (i = 0; i < size; i++) {
+		err = broadsheet_spiflash_read_byte(par, &data[i]);
+		if (err)
+			goto failout;
+	}
+
+failout:
+	broadsheet_write_reg(par, 0x0208, 0);
+	return err;
+}
+
+#define BS_SPIFLASH_PAGE_SIZE 256
+static int broadsheet_spiflash_write_page(struct broadsheetfb_par *par,
+						int addr, const char *data)
+{
+	int err;
+	int i;
+
+	broadsheet_spiflash_write_control(par, 1);
+
+	err = broadsheet_spiflash_op_on_address(par, 0x02, addr);
+	if (err)
+		goto failout;
+
+	for (i = 0; i < BS_SPIFLASH_PAGE_SIZE; i++) {
+		err = broadsheet_spiflash_write_byte(par, data[i]);
+		if (err)
+			goto failout;
+	}
+
+	broadsheet_write_reg(par, 0x0208, 0);
+
+	err = broadsheet_spiflash_wait_for_status(par, 100);
+
+failout:
+	return err;
+}
+
+static int broadsheet_spiflash_write_sector(struct broadsheetfb_par *par,
+				int addr, const char *data, int sector_size)
+{
+	int i;
+	int err;
+
+	for (i = 0; i < sector_size; i += BS_SPIFLASH_PAGE_SIZE) {
+		err = broadsheet_spiflash_write_page(par, addr + i, &data[i]);
+		if (err)
+			return err;
+	}
+	return 0;
+}
+
+/*
+ * The caller must guarantee that the data to be rewritten is entirely
+ * contained within this sector. That is, data_start_addr + data_len
+ * must be less than sector_start_addr + sector_size.
+ */
+static int broadsheet_spiflash_rewrite_sector(struct broadsheetfb_par *par,
+					int sector_size, int data_start_addr,
+					int data_len, const char *data)
+{
+	int err;
+	char *sector_buffer;
+	int tail_start_addr;
+	int start_sector_addr;
+
+	sector_buffer = kzalloc(sizeof(char)*sector_size, GFP_KERNEL);
+	if (!sector_buffer)
+		return -ENOMEM;
+
+	/* the start address of the sector is the 0th byte of that sector */
+	start_sector_addr = (data_start_addr / sector_size) * sector_size;
+
+	/*
+	 * check if there is head data that we need to readback into our sector
+	 * buffer first
+	 */
+	if (data_start_addr != start_sector_addr) {
+		/*
+		 * we need to read every byte up till the start address of our
+		 * data and we put it into our sector buffer.
+		 */
+		err = broadsheet_spiflash_read_range(par, start_sector_addr,
+						data_start_addr, sector_buffer);
+		if (err)
+			return err;
+	}
+
+	/* now we copy our data into the right place in the sector buffer */
+	memcpy(sector_buffer + data_start_addr, data, data_len);
+
+	/*
+	 * now we check if there is a tail section of the sector that we need to
+	 * readback.
+	 */
+	tail_start_addr = (data_start_addr + data_len) % sector_size;
+
+	if (tail_start_addr) {
+		int tail_len;
+
+		tail_len = sector_size - tail_start_addr;
+
+		/* now we read this tail into our sector buffer */
+		err = broadsheet_spiflash_read_range(par, tail_start_addr,
+			tail_len, sector_buffer + tail_start_addr);
+		if (err)
+			return err;
+	}
+
+	/* if we got here we have the full sector that we want to rewrite. */
+
+	/* first erase the sector */
+	err = broadsheet_spiflash_erase_sector(par, start_sector_addr);
+	if (err)
+		return err;
+
+	/* now write it */
+	err = broadsheet_spiflash_write_sector(par, start_sector_addr,
+					sector_buffer, sector_size);
+	return err;
+}
+
+static int broadsheet_write_spiflash(struct broadsheetfb_par *par, u32 wfm_addr,
+				const u8 *wfm, int bytecount, int flash_type)
+{
+	int sector_size;
+	int err;
+	int cur_addr;
+	int writecount;
+	int maxlen;
+	int offset = 0;
+
+	switch (flash_type) {
+	case 0x10:
+		sector_size = 32*1024;
+		break;
+	case 0x11:
+	default:
+		sector_size = 64*1024;
+		break;
+	}
+
+	while (bytecount) {
+		cur_addr = wfm_addr + offset;
+		maxlen = roundup(cur_addr, sector_size) - cur_addr;
+		writecount = min(bytecount, maxlen);
+
+		err = broadsheet_spiflash_rewrite_sector(par, sector_size,
+				cur_addr, writecount, wfm + offset);
+		if (err)
+			return err;
+
+		offset += writecount;
+		bytecount -= writecount;
+	}
+
+	return 0;
+}
+
+static int broadsheet_store_waveform_to_spiflash(struct broadsheetfb_par *par,
+						const u8 *wfm, size_t wfm_size)
+{
+	int err = 0;
+	u16 initial_sfmcd = 0;
+	int flash_type = 0;
+
+	err = broadsheet_setup_for_wfm_write(par, &initial_sfmcd, &flash_type);
+	if (err)
+		goto failout;
+
+	err = broadsheet_write_spiflash(par, 0x886, wfm, wfm_size, flash_type);
+
+failout:
+	broadsheet_write_reg(par, 0x0204, initial_sfmcd);
+	return err;
+}
+
+static ssize_t broadsheet_loadstore_waveform(struct device *dev,
+						struct device_attribute *attr,
+						const char *buf, size_t len)
+{
+	int err;
+	struct fb_info *info = dev_get_drvdata(dev);
+	struct broadsheetfb_par *par = info->par;
+	const struct firmware *fw_entry;
+
+	if (len < 1)
+		return -EINVAL;
+
+	err = request_firmware(&fw_entry, "broadsheet.wbf", dev);
+	if (err < 0) {
+		dev_err(dev, "Failed to get broadsheet waveform\n");
+		goto err_failed;
+	}
+
+	/* try to enforce reasonable min max on waveform */
+	if ((fw_entry->size < 8*1024) || (fw_entry->size > 64*1024)) {
+		dev_err(dev, "Invalid waveform\n");
+		err = -EINVAL;
+		goto err_failed;
+	}
+
+	mutex_lock(&(par->io_lock));
+	err = broadsheet_store_waveform_to_spiflash(par, fw_entry->data,
+							fw_entry->size);
+
+	mutex_unlock(&(par->io_lock));
+	if (err < 0) {
+		dev_err(dev, "Failed to store broadsheet waveform\n");
+		goto err_failed;
+	}
+
+	dev_info(dev, "Stored broadsheet waveform, size %zd\n", fw_entry->size);
+
+	return len;
+
+err_failed:
+	return err;
+}
+static DEVICE_ATTR(loadstore_waveform, S_IWUSR, NULL,
+			broadsheet_loadstore_waveform);
+
+/* upper level functions that manipulate the display and other stuff */
 static void __devinit broadsheet_init_display(struct broadsheetfb_par *par)
 {
 	u16 args[5];
-
-	args[0] = DPY_W;
-	args[1] = DPY_H;
-	args[2] = (100 | (1 << 8) | (1 << 9)); /* sdcfg */
-	args[3] = 2; /* gdrv cfg */
-	args[4] = (4 | (1 << 7)); /* lut index format */
+	int xres = par->info->var.xres;
+	int yres = par->info->var.yres;
+
+	args[0] = panel_table[par->panel_index].w;
+	args[1] = panel_table[par->panel_index].h;
+	args[2] = panel_table[par->panel_index].sdcfg;
+	args[3] = panel_table[par->panel_index].gdcfg;
+	args[4] = panel_table[par->panel_index].lutfmt;
 	broadsheet_send_cmdargs(par, BS_CMD_INIT_DSPE_CFG, 5, args);
 
 	/* did the controller really set it? */
 	broadsheet_send_cmdargs(par, BS_CMD_INIT_DSPE_CFG, 5, args);
 
-	args[0] = 4; /* fsync len */
-	args[1] = (10 << 8) | 4; /* fend/fbegin len */
-	args[2] = 10; /* line sync len */
-	args[3] = (100 << 8) | 4; /* line end/begin len */
-	args[4] = 6; /* pixel clock cfg */
+	args[0] = panel_table[par->panel_index].fsynclen;
+	args[1] = panel_table[par->panel_index].fendfbegin;
+	args[2] = panel_table[par->panel_index].lsynclen;
+	args[3] = panel_table[par->panel_index].lendlbegin;
+	args[4] = panel_table[par->panel_index].pixclk;
 	broadsheet_send_cmdargs(par, BS_CMD_INIT_DSPE_TMG, 5, args);
 
+	broadsheet_write_reg32(par, 0x310, xres*yres*2);
+
 	/* setup waveform */
 	args[0] = 0x886;
 	args[1] = 0;
@@ -207,8 +818,9 @@ static void __devinit broadsheet_init_display(struct broadsheetfb_par *par)
 	args[0] = 0x154;
 	broadsheet_send_cmdargs(par, BS_CMD_WR_REG, 1, args);
 
-	broadsheet_burst_write(par, DPY_W*DPY_H/2,
-				(u16 *) par->info->screen_base);
+	broadsheet_burst_write(par, (panel_table[par->panel_index].w *
+					panel_table[par->panel_index].h)/2,
+					(u16 *) par->info->screen_base);
 
 	broadsheet_send_command(par, BS_CMD_LD_IMG_END);
 
@@ -222,6 +834,21 @@ static void __devinit broadsheet_init_display(struct broadsheetfb_par *par)
 	par->board->wait_for_rdy(par);
 }
 
+static void __devinit broadsheet_identify(struct broadsheetfb_par *par)
+{
+	u16 rev, prc;
+	struct device *dev = par->info->device;
+
+	rev = broadsheet_read_reg(par, BS_REG_REV);
+	prc = broadsheet_read_reg(par, BS_REG_PRC);
+	dev_info(dev, "Broadsheet Rev 0x%x, Product Code 0x%x\n", rev, prc);
+
+	if (prc != 0x0047)
+		dev_warn(dev, "Unrecognized Broadsheet Product Code\n");
+	if (rev != 0x0100)
+		dev_warn(dev, "Unrecognized Broadsheet Revision\n");
+}
+
 static void __devinit broadsheet_init(struct broadsheetfb_par *par)
 {
 	broadsheet_send_command(par, BS_CMD_INIT_SYS_RUN);
@@ -236,6 +863,7 @@ static void broadsheetfb_dpy_update_pages(struct broadsheetfb_par *par,
 	u16 args[5];
 	unsigned char *buf = (unsigned char *)par->info->screen_base;
 
+	mutex_lock(&(par->io_lock));
 	/* y1 must be a multiple of 4 so drop the lower bits */
 	y1 &= 0xFFFC;
 	/* y2 must be a multiple of 4 , but - 1 so up the lower bits */
@@ -265,6 +893,7 @@ static void broadsheetfb_dpy_update_pages(struct broadsheetfb_par *par,
 	broadsheet_send_command(par, BS_CMD_WAIT_DSPE_FREND);
 
 	par->board->wait_for_rdy(par);
+	mutex_unlock(&(par->io_lock));
 
 }
 
@@ -272,13 +901,15 @@ static void broadsheetfb_dpy_update(struct broadsheetfb_par *par)
 {
 	u16 args[5];
 
+	mutex_lock(&(par->io_lock));
 	args[0] = 0x3 << 4;
 	broadsheet_send_cmdargs(par, BS_CMD_LD_IMG, 1, args);
 
 	args[0] = 0x154;
 	broadsheet_send_cmdargs(par, BS_CMD_WR_REG, 1, args);
-	broadsheet_burst_write(par, DPY_W*DPY_H/2,
-				(u16 *) par->info->screen_base);
+	broadsheet_burst_write(par, (panel_table[par->panel_index].w *
+					panel_table[par->panel_index].h)/2,
+					(u16 *) par->info->screen_base);
 
 	broadsheet_send_command(par, BS_CMD_LD_IMG_END);
 
@@ -290,7 +921,7 @@ static void broadsheetfb_dpy_update(struct broadsheetfb_par *par)
 	broadsheet_send_command(par, BS_CMD_WAIT_DSPE_FREND);
 
 	par->board->wait_for_rdy(par);
-
+	mutex_unlock(&(par->io_lock));
 }
 
 /* this is called back from the deferred io workqueue */
@@ -436,6 +1067,8 @@ static int __devinit broadsheetfb_probe(struct platform_device *dev)
 	unsigned char *videomemory;
 	struct broadsheetfb_par *par;
 	int i;
+	int dpyw, dpyh;
+	int panel_index;
 
 	/* pick up board specific routines */
 	board = dev->dev.platform_data;
@@ -450,7 +1083,24 @@ static int __devinit broadsheetfb_probe(struct platform_device *dev)
 	if (!info)
 		goto err;
 
-	videomemorysize = (DPY_W*DPY_H);
+	switch (board->get_panel_type()) {
+	case 37:
+		panel_index = 1;
+		break;
+	case 97:
+		panel_index = 2;
+		break;
+	case 6:
+	default:
+		panel_index = 0;
+		break;
+	}
+
+	dpyw = panel_table[panel_index].w;
+	dpyh = panel_table[panel_index].h;
+
+	videomemorysize = roundup((dpyw*dpyh), PAGE_SIZE);
+
 	videomemory = vmalloc(videomemorysize);
 	if (!videomemory)
 		goto err_fb_rel;
@@ -460,16 +1110,25 @@ static int __devinit broadsheetfb_probe(struct platform_device *dev)
 	info->screen_base = (char *)videomemory;
 	info->fbops = &broadsheetfb_ops;
 
+	broadsheetfb_var.xres = dpyw;
+	broadsheetfb_var.yres = dpyh;
+	broadsheetfb_var.xres_virtual = dpyw;
+	broadsheetfb_var.yres_virtual = dpyh;
 	info->var = broadsheetfb_var;
+
+	broadsheetfb_fix.line_length = dpyw;
 	info->fix = broadsheetfb_fix;
 	info->fix.smem_len = videomemorysize;
 	par = info->par;
+	par->panel_index = panel_index;
 	par->info = info;
 	par->board = board;
 	par->write_reg = broadsheet_write_reg;
 	par->read_reg = broadsheet_read_reg;
 	init_waitqueue_head(&par->waitq);
 
+	mutex_init(&par->io_lock);
+
 	info->flags = FBINFO_FLAG_DEFAULT | FBINFO_VIRTFB;
 
 	info->fbdefio = &broadsheetfb_defio;
@@ -496,13 +1155,20 @@ static int __devinit broadsheetfb_probe(struct platform_device *dev)
 	if (retval < 0)
 		goto err_free_irq;
 
+	broadsheet_identify(par);
+
 	broadsheet_init(par);
 
 	retval = register_framebuffer(info);
 	if (retval < 0)
 		goto err_free_irq;
+
 	platform_set_drvdata(dev, info);
 
+	retval = device_create_file(&dev->dev, &dev_attr_loadstore_waveform);
+	if (retval < 0)
+		goto err_unreg_fb;
+
 	printk(KERN_INFO
 	       "fb%d: Broadsheet frame buffer, using %dK of video memory\n",
 	       info->node, videomemorysize >> 10);
@@ -510,6 +1176,8 @@ static int __devinit broadsheetfb_probe(struct platform_device *dev)
 
 	return 0;
 
+err_unreg_fb:
+	unregister_framebuffer(info);
 err_free_irq:
 	board->cleanup(par);
 err_cmap:
@@ -530,6 +1198,8 @@ static int __devexit broadsheetfb_remove(struct platform_device *dev)
 
 	if (info) {
 		struct broadsheetfb_par *par = info->par;
+
+		device_remove_file(info->dev, &dev_attr_loadstore_waveform);
 		unregister_framebuffer(info);
 		fb_deferred_io_cleanup(info);
 		par->board->cleanup(par);
diff --git a/drivers/video/cobalt_lcdfb.c b/drivers/video/cobalt_lcdfb.c
index 108b89e09a80..5eb61b5adfe8 100644
--- a/drivers/video/cobalt_lcdfb.c
+++ b/drivers/video/cobalt_lcdfb.c
@@ -287,7 +287,7 @@ static struct fb_ops cobalt_lcd_fbops = {
 	.fb_cursor	= cobalt_lcdfb_cursor,
 };
 
-static int __init cobalt_lcdfb_probe(struct platform_device *dev)
+static int __devinit cobalt_lcdfb_probe(struct platform_device *dev)
 {
 	struct fb_info *info;
 	struct resource *res;
diff --git a/drivers/video/efifb.c b/drivers/video/efifb.c
index d25df51bb0d2..581d2dbf675a 100644
--- a/drivers/video/efifb.c
+++ b/drivers/video/efifb.c
@@ -210,7 +210,7 @@ static int __init efifb_setup(char *options)
 	return 0;
 }
 
-static int __init efifb_probe(struct platform_device *dev)
+static int __devinit efifb_probe(struct platform_device *dev)
 {
 	struct fb_info *info;
 	int err;
diff --git a/drivers/video/epson1355fb.c b/drivers/video/epson1355fb.c
index 2735b79e52a1..6d755bb3a2bc 100644
--- a/drivers/video/epson1355fb.c
+++ b/drivers/video/epson1355fb.c
@@ -602,7 +602,7 @@ static int epson1355fb_remove(struct platform_device *dev)
 	return 0;
 }
 
-int __init epson1355fb_probe(struct platform_device *dev)
+int __devinit epson1355fb_probe(struct platform_device *dev)
 {
 	struct epson1355_par *default_par;
 	struct fb_info *info;
diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c
index 695fa013fe7e..5643a35c1746 100644
--- a/drivers/video/gbefb.c
+++ b/drivers/video/gbefb.c
@@ -1128,7 +1128,7 @@ static int __init gbefb_setup(char *options)
 	return 0;
 }
 
-static int __init gbefb_probe(struct platform_device *p_dev)
+static int __devinit gbefb_probe(struct platform_device *p_dev)
 {
 	int i, ret = 0;
 	struct fb_info *info;
diff --git a/drivers/video/hgafb.c b/drivers/video/hgafb.c
index 0129c044f6d6..db9b785b56eb 100644
--- a/drivers/video/hgafb.c
+++ b/drivers/video/hgafb.c
@@ -551,7 +551,7 @@ static struct fb_ops hgafb_ops = {
 	 *  Initialization
 	 */
 
-static int __init hgafb_probe(struct platform_device *pdev)
+static int __devinit hgafb_probe(struct platform_device *pdev)
 {
 	struct fb_info *info;
 
diff --git a/drivers/video/hitfb.c b/drivers/video/hitfb.c
index 73c83a8de2d3..bf78779199c6 100644
--- a/drivers/video/hitfb.c
+++ b/drivers/video/hitfb.c
@@ -325,7 +325,7 @@ static struct fb_ops hitfb_ops = {
 	.fb_imageblit	= cfb_imageblit,
 };
 
-static int __init hitfb_probe(struct platform_device *dev)
+static int __devinit hitfb_probe(struct platform_device *dev)
 {
 	unsigned short lcdclor, ldr3, ldvndr;
 	struct fb_info *info;
diff --git a/drivers/video/mb862xx/mb862xxfb.c b/drivers/video/mb862xx/mb862xxfb.c
index fabb0c59a211..8280a58a0e55 100644
--- a/drivers/video/mb862xx/mb862xxfb.c
+++ b/drivers/video/mb862xx/mb862xxfb.c
@@ -31,15 +31,6 @@
 #define CARMINE_MEM_SIZE	0x8000000
 #define DRV_NAME		"mb862xxfb"
 
-#if defined(CONFIG_LWMON5)
-static struct mb862xx_gc_mode lwmon5_gc_mode = {
-	/* Mode for Sharp LQ104V1DG61 TFT LCD Panel */
-	{ "640x480", 60, 640, 480, 40000, 48, 16, 32, 11, 96, 2, 0, 0, 0 },
-	/* 16 bits/pixel, 32MB, 100MHz, SDRAM memory mode value */
-	16, 0x2000000, GC_CCF_COT_100, 0x414fb7f2
-};
-#endif
-
 #if defined(CONFIG_SOCRATES)
 static struct mb862xx_gc_mode socrates_gc_mode = {
 	/* Mode for Prime View PM070WL4 TFT LCD Panel */
@@ -600,10 +591,6 @@ static int __devinit of_platform_mb862xx_probe(struct of_device *ofdev,
 		goto irqdisp;
 	}
 
-#if defined(CONFIG_LWMON5)
-	par->gc_mode = &lwmon5_gc_mode;
-#endif
-
 #if defined(CONFIG_SOCRATES)
 	par->gc_mode = &socrates_gc_mode;
 #endif
diff --git a/drivers/video/mbx/mbxfb.c b/drivers/video/mbx/mbxfb.c
index 01f77bcc68f9..afea9abbd678 100644
--- a/drivers/video/mbx/mbxfb.c
+++ b/drivers/video/mbx/mbxfb.c
@@ -693,7 +693,7 @@ static void __devinit setup_memc(struct fb_info *fbi)
 	unsigned long tmp;
 	int i;
 
-	/* FIXME: use platfrom specific parameters */
+	/* FIXME: use platform specific parameters */
 	/* setup SDRAM controller */
 	write_reg_dly((LMCFG_LMC_DS | LMCFG_LMC_TS | LMCFG_LMD_TS |
 		LMCFG_LMA_TS),
diff --git a/drivers/video/modedb.c b/drivers/video/modedb.c
index 0129f1bc3522..b895aae41630 100644
--- a/drivers/video/modedb.c
+++ b/drivers/video/modedb.c
@@ -893,7 +893,7 @@ const struct fb_videomode *fb_match_mode(const struct fb_var_screeninfo *var,
 }
 
 /**
- * fb_add_videomode: adds videomode entry to modelist
+ * fb_add_videomode - adds videomode entry to modelist
  * @mode: videomode to add
  * @head: struct list_head of modelist
  *
@@ -928,7 +928,7 @@ int fb_add_videomode(const struct fb_videomode *mode, struct list_head *head)
 }
 
 /**
- * fb_delete_videomode: removed videomode entry from modelist
+ * fb_delete_videomode - removed videomode entry from modelist
  * @mode: videomode to remove
  * @head: struct list_head of modelist
  *
@@ -953,7 +953,7 @@ void fb_delete_videomode(const struct fb_videomode *mode,
 }
 
 /**
- * fb_destroy_modelist: destroy modelist
+ * fb_destroy_modelist - destroy modelist
  * @head: struct list_head of modelist
  */
 void fb_destroy_modelist(struct list_head *head)
@@ -968,7 +968,7 @@ void fb_destroy_modelist(struct list_head *head)
 EXPORT_SYMBOL_GPL(fb_destroy_modelist);
 
 /**
- * fb_videomode_to_modelist: convert mode array to mode list
+ * fb_videomode_to_modelist - convert mode array to mode list
  * @modedb: array of struct fb_videomode
  * @num: number of entries in array
  * @head: struct list_head of modelist
diff --git a/drivers/video/nuc900fb.c b/drivers/video/nuc900fb.c
new file mode 100644
index 000000000000..6bf0d460a738
--- /dev/null
+++ b/drivers/video/nuc900fb.c
@@ -0,0 +1,779 @@
+/*
+ *
+ * Copyright (c) 2009 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ *  Description:
+ *    Nuvoton LCD Controller Driver
+ *  Author:
+ *    Wang Qiang (rurality.linux@gmail.com) 2009/12/11
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/tty.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/wait.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/cpufreq.h>
+#include <linux/io.h>
+#include <linux/pm.h>
+#include <linux/device.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-ldm.h>
+#include <mach/fb.h>
+#include <mach/clkdev.h>
+
+#include "nuc900fb.h"
+
+
+/*
+ *  Initialize the nuc900 video (dual) buffer address
+ */
+static void nuc900fb_set_lcdaddr(struct fb_info *info)
+{
+	struct nuc900fb_info *fbi = info->par;
+	void __iomem *regs = fbi->io;
+	unsigned long vbaddr1, vbaddr2;
+
+	vbaddr1  = info->fix.smem_start;
+	vbaddr2  = info->fix.smem_start;
+	vbaddr2 += info->fix.line_length * info->var.yres;
+
+	/* set frambuffer start phy addr*/
+	writel(vbaddr1, regs + REG_LCM_VA_BADDR0);
+	writel(vbaddr2, regs + REG_LCM_VA_BADDR1);
+
+	writel(fbi->regs.lcd_va_fbctrl, regs + REG_LCM_VA_FBCTRL);
+	writel(fbi->regs.lcd_va_scale, regs + REG_LCM_VA_SCALE);
+}
+
+/*
+ *	calculate divider for lcd div
+ */
+static unsigned int nuc900fb_calc_pixclk(struct nuc900fb_info *fbi,
+					 unsigned long pixclk)
+{
+	unsigned long clk = fbi->clk_rate;
+	unsigned long long div;
+
+	/* pixclk is in picseconds. our clock is in Hz*/
+	/* div = (clk * pixclk)/10^12 */
+	div = (unsigned long long)clk * pixclk;
+	div >>= 12;
+	do_div(div, 625 * 625UL * 625);
+
+	dev_dbg(fbi->dev, "pixclk %ld, divisor is %lld\n", pixclk, div);
+
+	return div;
+}
+
+/*
+ *	Check the video params of 'var'.
+ */
+static int nuc900fb_check_var(struct fb_var_screeninfo *var,
+			       struct fb_info *info)
+{
+	struct nuc900fb_info *fbi = info->par;
+	struct nuc900fb_mach_info *mach_info = fbi->dev->platform_data;
+	struct nuc900fb_display *display = NULL;
+	struct nuc900fb_display *default_display = mach_info->displays +
+						   mach_info->default_display;
+	int i;
+
+	dev_dbg(fbi->dev, "check_var(var=%p, info=%p)\n", var, info);
+
+	/* validate x/y resolution */
+	/* choose default mode if possible */
+	if (var->xres == default_display->xres &&
+	    var->yres == default_display->yres &&
+	    var->bits_per_pixel == default_display->bpp)
+		display = default_display;
+	else
+		for (i = 0; i < mach_info->num_displays; i++)
+			if (var->xres == mach_info->displays[i].xres &&
+			    var->yres == mach_info->displays[i].yres &&
+			    var->bits_per_pixel == mach_info->displays[i].bpp) {
+				display = mach_info->displays + i;
+				break;
+			}
+
+	if (display == NULL) {
+		printk(KERN_ERR "wrong resolution or depth %dx%d at %d bit per pixel\n",
+			var->xres, var->yres, var->bits_per_pixel);
+		return -EINVAL;
+	}
+
+	/* it should be the same size as the display */
+	var->xres_virtual	= display->xres;
+	var->yres_virtual	= display->yres;
+	var->height		= display->height;
+	var->width		= display->width;
+
+	/* copy lcd settings */
+	var->pixclock		= display->pixclock;
+	var->left_margin	= display->left_margin;
+	var->right_margin	= display->right_margin;
+	var->upper_margin	= display->upper_margin;
+	var->lower_margin	= display->lower_margin;
+	var->vsync_len		= display->vsync_len;
+	var->hsync_len		= display->hsync_len;
+
+	var->transp.offset	= 0;
+	var->transp.length	= 0;
+
+	fbi->regs.lcd_dccs = display->dccs;
+	fbi->regs.lcd_device_ctrl = display->devctl;
+	fbi->regs.lcd_va_fbctrl = display->fbctrl;
+	fbi->regs.lcd_va_scale = display->scale;
+
+	/* set R/G/B possions */
+	switch (var->bits_per_pixel) {
+	case 1:
+	case 2:
+	case 4:
+	case 8:
+	default:
+		var->red.offset 	= 0;
+		var->red.length 	= var->bits_per_pixel;
+		var->green 		= var->red;
+		var->blue		= var->red;
+		break;
+	case 12:
+		var->red.length		= 4;
+		var->green.length	= 4;
+		var->blue.length	= 4;
+		var->red.offset		= 8;
+		var->green.offset	= 4;
+		var->blue.offset	= 0;
+		break;
+	case 16:
+		var->red.length		= 5;
+		var->green.length	= 6;
+		var->blue.length	= 5;
+		var->red.offset		= 11;
+		var->green.offset	= 5;
+		var->blue.offset	= 0;
+		break;
+	case 18:
+		var->red.length		= 6;
+		var->green.length	= 6;
+		var->blue.length	= 6;
+		var->red.offset		= 12;
+		var->green.offset	= 6;
+		var->blue.offset	= 0;
+		break;
+	case 32:
+		var->red.length		= 8;
+		var->green.length	= 8;
+		var->blue.length	= 8;
+		var->red.offset		= 16;
+		var->green.offset	= 8;
+		var->blue.offset	= 0;
+		break;
+	}
+
+	return 0;
+}
+
+/*
+ *	Calculate lcd register values from var setting & save into hw
+ */
+static void nuc900fb_calculate_lcd_regs(const struct fb_info *info,
+					struct nuc900fb_hw *regs)
+{
+	const struct fb_var_screeninfo *var = &info->var;
+	int vtt = var->height + var->upper_margin + var->lower_margin;
+	int htt = var->width + var->left_margin + var->right_margin;
+	int hsync = var->width + var->right_margin;
+	int vsync = var->height + var->lower_margin;
+
+	regs->lcd_crtc_size = LCM_CRTC_SIZE_VTTVAL(vtt) |
+			      LCM_CRTC_SIZE_HTTVAL(htt);
+	regs->lcd_crtc_dend = LCM_CRTC_DEND_VDENDVAL(var->height) |
+			      LCM_CRTC_DEND_HDENDVAL(var->width);
+	regs->lcd_crtc_hr = LCM_CRTC_HR_EVAL(var->width + 5) |
+			    LCM_CRTC_HR_SVAL(var->width + 1);
+	regs->lcd_crtc_hsync = LCM_CRTC_HSYNC_EVAL(hsync + var->hsync_len) |
+			       LCM_CRTC_HSYNC_SVAL(hsync);
+	regs->lcd_crtc_vr = LCM_CRTC_VR_EVAL(vsync + var->vsync_len) |
+			    LCM_CRTC_VR_SVAL(vsync);
+
+}
+
+/*
+ *	Activate (set) the controller from the given framebuffer
+ *	information
+ */
+static void nuc900fb_activate_var(struct fb_info *info)
+{
+	struct nuc900fb_info *fbi = info->par;
+	void __iomem *regs = fbi->io;
+	struct fb_var_screeninfo *var = &info->var;
+	int clkdiv;
+
+	clkdiv = nuc900fb_calc_pixclk(fbi, var->pixclock) - 1;
+	if (clkdiv < 0)
+		clkdiv = 0;
+
+	nuc900fb_calculate_lcd_regs(info, &fbi->regs);
+
+	/* set the new lcd registers*/
+
+	dev_dbg(fbi->dev, "new lcd register set:\n");
+	dev_dbg(fbi->dev, "dccs       = 0x%08x\n", fbi->regs.lcd_dccs);
+	dev_dbg(fbi->dev, "dev_ctl    = 0x%08x\n", fbi->regs.lcd_device_ctrl);
+	dev_dbg(fbi->dev, "crtc_size  = 0x%08x\n", fbi->regs.lcd_crtc_size);
+	dev_dbg(fbi->dev, "crtc_dend  = 0x%08x\n", fbi->regs.lcd_crtc_dend);
+	dev_dbg(fbi->dev, "crtc_hr    = 0x%08x\n", fbi->regs.lcd_crtc_hr);
+	dev_dbg(fbi->dev, "crtc_hsync = 0x%08x\n", fbi->regs.lcd_crtc_hsync);
+	dev_dbg(fbi->dev, "crtc_vr    = 0x%08x\n", fbi->regs.lcd_crtc_vr);
+
+	writel(fbi->regs.lcd_device_ctrl, regs + REG_LCM_DEV_CTRL);
+	writel(fbi->regs.lcd_crtc_size, regs + REG_LCM_CRTC_SIZE);
+	writel(fbi->regs.lcd_crtc_dend, regs + REG_LCM_CRTC_DEND);
+	writel(fbi->regs.lcd_crtc_hr, regs + REG_LCM_CRTC_HR);
+	writel(fbi->regs.lcd_crtc_hsync, regs + REG_LCM_CRTC_HSYNC);
+	writel(fbi->regs.lcd_crtc_vr, regs + REG_LCM_CRTC_VR);
+
+	/* set lcd address pointers */
+	nuc900fb_set_lcdaddr(info);
+
+	writel(fbi->regs.lcd_dccs, regs + REG_LCM_DCCS);
+}
+
+/*
+ *      Alters the hardware state.
+ *
+ */
+static int nuc900fb_set_par(struct fb_info *info)
+{
+	struct fb_var_screeninfo *var = &info->var;
+
+	switch (var->bits_per_pixel) {
+	case 32:
+	case 24:
+	case 18:
+	case 16:
+	case 12:
+		info->fix.visual = FB_VISUAL_TRUECOLOR;
+		break;
+	case 1:
+		info->fix.visual = FB_VISUAL_MONO01;
+		break;
+	default:
+		info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+		break;
+	}
+
+	info->fix.line_length = (var->xres_virtual * var->bits_per_pixel) / 8;
+
+	/* activate this new configuration */
+	nuc900fb_activate_var(info);
+	return 0;
+}
+
+static inline unsigned int chan_to_field(unsigned int chan,
+					 struct fb_bitfield *bf)
+{
+	chan &= 0xffff;
+	chan >>= 16 - bf->length;
+	return chan << bf->offset;
+}
+
+static int nuc900fb_setcolreg(unsigned regno,
+			       unsigned red, unsigned green, unsigned blue,
+			       unsigned transp, struct fb_info *info)
+{
+	unsigned int val;
+
+	switch (info->fix.visual) {
+	case FB_VISUAL_TRUECOLOR:
+		/* true-colour, use pseuo-palette */
+		if (regno < 16) {
+			u32 *pal = info->pseudo_palette;
+
+			val  = chan_to_field(red, &info->var.red);
+			val |= chan_to_field(green, &info->var.green);
+			val |= chan_to_field(blue, &info->var.blue);
+			pal[regno] = val;
+		}
+		break;
+
+	default:
+		return 1;   /* unknown type */
+	}
+	return 0;
+}
+
+/**
+ *      nuc900fb_blank
+ *
+ */
+static int nuc900fb_blank(int blank_mode, struct fb_info *info)
+{
+
+	return 0;
+}
+
+static struct fb_ops nuc900fb_ops = {
+	.owner			= THIS_MODULE,
+	.fb_check_var		= nuc900fb_check_var,
+	.fb_set_par		= nuc900fb_set_par,
+	.fb_blank		= nuc900fb_blank,
+	.fb_setcolreg		= nuc900fb_setcolreg,
+	.fb_fillrect		= cfb_fillrect,
+	.fb_copyarea		= cfb_copyarea,
+	.fb_imageblit		= cfb_imageblit,
+};
+
+
+static inline void modify_gpio(void __iomem *reg,
+			       unsigned long set, unsigned long mask)
+{
+	unsigned long tmp;
+	tmp = readl(reg) & ~mask;
+	writel(tmp | set, reg);
+}
+
+/*
+ * Initialise LCD-related registers
+ */
+static int nuc900fb_init_registers(struct fb_info *info)
+{
+	struct nuc900fb_info *fbi = info->par;
+	struct nuc900fb_mach_info *mach_info = fbi->dev->platform_data;
+	void __iomem *regs = fbi->io;
+
+	/*reset the display engine*/
+	writel(0, regs + REG_LCM_DCCS);
+	writel(readl(regs + REG_LCM_DCCS) | LCM_DCCS_ENG_RST,
+	       regs + REG_LCM_DCCS);
+	ndelay(100);
+	writel(readl(regs + REG_LCM_DCCS) & (~LCM_DCCS_ENG_RST),
+	       regs + REG_LCM_DCCS);
+	ndelay(100);
+
+	writel(0, regs + REG_LCM_DEV_CTRL);
+
+	/* config gpio output */
+	modify_gpio(W90X900_VA_GPIO + 0x54, mach_info->gpio_dir,
+		    mach_info->gpio_dir_mask);
+	modify_gpio(W90X900_VA_GPIO + 0x58, mach_info->gpio_data,
+		    mach_info->gpio_data_mask);
+
+	return 0;
+}
+
+
+/*
+ *    Alloc the SDRAM region of NUC900 for the frame buffer.
+ *    The buffer should be a non-cached, non-buffered, memory region
+ *    to allow palette and pixel writes without flushing the cache.
+ */
+static int __init nuc900fb_map_video_memory(struct fb_info *info)
+{
+	struct nuc900fb_info *fbi = info->par;
+	dma_addr_t map_dma;
+	unsigned long map_size = PAGE_ALIGN(info->fix.smem_len);
+
+	dev_dbg(fbi->dev, "nuc900fb_map_video_memory(fbi=%p) map_size %lu\n",
+		fbi, map_size);
+
+	info->screen_base = dma_alloc_writecombine(fbi->dev, map_size,
+							&map_dma, GFP_KERNEL);
+
+	if (!info->screen_base)
+		return -ENOMEM;
+
+	memset(info->screen_base, 0x00, map_size);
+	info->fix.smem_start = map_dma;
+
+	return 0;
+}
+
+static inline void nuc900fb_unmap_video_memory(struct fb_info *info)
+{
+	struct nuc900fb_info *fbi = info->par;
+	dma_free_writecombine(fbi->dev, PAGE_ALIGN(info->fix.smem_len),
+			      info->screen_base, info->fix.smem_start);
+}
+
+static irqreturn_t nuc900fb_irqhandler(int irq, void *dev_id)
+{
+	struct nuc900fb_info *fbi = dev_id;
+	void __iomem *regs = fbi->io;
+	void __iomem *irq_base = fbi->irq_base;
+	unsigned long lcdirq = readl(regs + REG_LCM_INT_CS);
+
+	if (lcdirq & LCM_INT_CS_DISP_F_STATUS) {
+		writel(readl(irq_base) | 1<<30, irq_base);
+
+		/* wait VA_EN low */
+		if ((readl(regs + REG_LCM_DCCS) &
+		    LCM_DCCS_SINGLE) == LCM_DCCS_SINGLE)
+			while ((readl(regs + REG_LCM_DCCS) &
+			       LCM_DCCS_VA_EN) == LCM_DCCS_VA_EN)
+				;
+		/* display_out-enable */
+		writel(readl(regs + REG_LCM_DCCS) | LCM_DCCS_DISP_OUT_EN,
+			regs + REG_LCM_DCCS);
+		/* va-enable*/
+		writel(readl(regs + REG_LCM_DCCS) | LCM_DCCS_VA_EN,
+			regs + REG_LCM_DCCS);
+	} else if (lcdirq & LCM_INT_CS_UNDERRUN_INT) {
+		writel(readl(irq_base) | LCM_INT_CS_UNDERRUN_INT, irq_base);
+	} else if (lcdirq & LCM_INT_CS_BUS_ERROR_INT) {
+		writel(readl(irq_base) | LCM_INT_CS_BUS_ERROR_INT, irq_base);
+	}
+
+	return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_CPU_FREQ
+
+static int nuc900fb_cpufreq_transition(struct notifier_block *nb,
+				       unsigned long val, void *data)
+{
+	struct nuc900fb_info *info;
+	struct fb_info *fbinfo;
+	long delta_f;
+	info = container_of(nb, struct nuc900fb_info, freq_transition);
+	fbinfo = platform_get_drvdata(to_platform_device(info->dev));
+
+	delta_f = info->clk_rate - clk_get_rate(info->clk);
+
+	if ((val == CPUFREQ_POSTCHANGE && delta_f > 0) ||
+	   (val == CPUFREQ_PRECHANGE && delta_f < 0)) {
+		info->clk_rate = clk_get_rate(info->clk);
+		nuc900fb_activate_var(fbinfo);
+	}
+
+	return 0;
+}
+
+static inline int nuc900fb_cpufreq_register(struct nuc900fb_info *fbi)
+{
+	fbi->freq_transition.notifier_call = nuc900fb_cpufreq_transition;
+	return cpufreq_register_notifier(&fbi->freq_transition,
+				  CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+static inline void nuc900fb_cpufreq_deregister(struct nuc900fb_info *fbi)
+{
+	cpufreq_unregister_notifier(&fbi->freq_transition,
+				    CPUFREQ_TRANSITION_NOTIFIER);
+}
+#else
+static inline int nuc900fb_cpufreq_transition(struct notifier_block *nb,
+				       unsigned long val, void *data)
+{
+	return 0;
+}
+
+static inline int nuc900fb_cpufreq_register(struct nuc900fb_info *fbi)
+{
+	return 0;
+}
+
+static inline void nuc900fb_cpufreq_deregister(struct nuc900fb_info *info)
+{
+}
+#endif
+
+static char driver_name[] = "nuc900fb";
+
+static int __devinit nuc900fb_probe(struct platform_device *pdev)
+{
+	struct nuc900fb_info *fbi;
+	struct nuc900fb_display *display;
+	struct fb_info	   *fbinfo;
+	struct nuc900fb_mach_info *mach_info;
+	struct resource *res;
+	int ret;
+	int irq;
+	int i;
+	int size;
+
+	dev_dbg(&pdev->dev, "devinit\n");
+	mach_info = pdev->dev.platform_data;
+	if (mach_info == NULL) {
+		dev_err(&pdev->dev,
+			"no platform data for lcd, cannot attach\n");
+		return -EINVAL;
+	}
+
+	if (mach_info->default_display > mach_info->num_displays) {
+		dev_err(&pdev->dev,
+			"default display No. is %d but only %d displays \n",
+			mach_info->default_display, mach_info->num_displays);
+		return -EINVAL;
+	}
+
+
+	display = mach_info->displays + mach_info->default_display;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "no irq for device\n");
+		return -ENOENT;
+	}
+
+	fbinfo = framebuffer_alloc(sizeof(struct nuc900fb_info), &pdev->dev);
+	if (!fbinfo)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, fbinfo);
+
+	fbi = fbinfo->par;
+	fbi->dev = &pdev->dev;
+
+#ifdef CONFIG_CPU_NUC950
+	fbi->drv_type = LCDDRV_NUC950;
+#endif
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	size = (res->end - res->start) + 1;
+	fbi->mem = request_mem_region(res->start, size, pdev->name);
+	if (fbi->mem == NULL) {
+		dev_err(&pdev->dev, "failed to alloc memory region\n");
+		ret = -ENOENT;
+		goto free_fb;
+	}
+
+	fbi->io = ioremap(res->start, size);
+	if (fbi->io == NULL) {
+		dev_err(&pdev->dev, "ioremap() of lcd registers failed\n");
+		ret = -ENXIO;
+		goto release_mem_region;
+	}
+
+	fbi->irq_base = fbi->io + REG_LCM_INT_CS;
+
+
+	/* Stop the LCD */
+	writel(0, fbi->io + REG_LCM_DCCS);
+
+	/* fill the fbinfo*/
+	strcpy(fbinfo->fix.id, driver_name);
+	fbinfo->fix.type		= FB_TYPE_PACKED_PIXELS;
+	fbinfo->fix.type_aux		= 0;
+	fbinfo->fix.xpanstep		= 0;
+	fbinfo->fix.ypanstep		= 0;
+	fbinfo->fix.ywrapstep		= 0;
+	fbinfo->fix.accel		= FB_ACCEL_NONE;
+	fbinfo->var.nonstd		= 0;
+	fbinfo->var.activate		= FB_ACTIVATE_NOW;
+	fbinfo->var.accel_flags		= 0;
+	fbinfo->var.vmode		= FB_VMODE_NONINTERLACED;
+	fbinfo->fbops			= &nuc900fb_ops;
+	fbinfo->flags			= FBINFO_FLAG_DEFAULT;
+	fbinfo->pseudo_palette		= &fbi->pseudo_pal;
+
+	ret = request_irq(irq, nuc900fb_irqhandler, IRQF_DISABLED,
+			  pdev->name, fbinfo);
+	if (ret) {
+		dev_err(&pdev->dev, "cannot register irq handler %d -err %d\n",
+			irq, ret);
+		ret = -EBUSY;
+		goto release_regs;
+	}
+
+	nuc900_driver_clksrc_div(&pdev->dev, "ext", 0x2);
+
+	fbi->clk = clk_get(&pdev->dev, NULL);
+	if (!fbi->clk || IS_ERR(fbi->clk)) {
+		printk(KERN_ERR "nuc900-lcd:failed to get lcd clock source\n");
+		ret = -ENOENT;
+		goto release_irq;
+	}
+
+	clk_enable(fbi->clk);
+	dev_dbg(&pdev->dev, "got and enabled clock\n");
+
+	fbi->clk_rate = clk_get_rate(fbi->clk);
+
+	/* calutate the video buffer size */
+	for (i = 0; i < mach_info->num_displays; i++) {
+		unsigned long smem_len = mach_info->displays[i].xres;
+		smem_len *= mach_info->displays[i].yres;
+		smem_len *= mach_info->displays[i].bpp;
+		smem_len >>= 3;
+		if (fbinfo->fix.smem_len < smem_len)
+			fbinfo->fix.smem_len = smem_len;
+	}
+
+	/* Initialize Video Memory */
+	ret = nuc900fb_map_video_memory(fbinfo);
+	if (ret) {
+		printk(KERN_ERR "Failed to allocate video RAM: %x\n", ret);
+		goto release_clock;
+	}
+
+	dev_dbg(&pdev->dev, "got video memory\n");
+
+	fbinfo->var.xres = display->xres;
+	fbinfo->var.yres = display->yres;
+	fbinfo->var.bits_per_pixel = display->bpp;
+
+	nuc900fb_init_registers(fbinfo);
+
+	nuc900fb_check_var(&fbinfo->var, fbinfo);
+
+	ret = nuc900fb_cpufreq_register(fbi);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to register cpufreq\n");
+		goto free_video_memory;
+	}
+
+	ret = register_framebuffer(fbinfo);
+	if (ret) {
+		printk(KERN_ERR "failed to register framebuffer device: %d\n",
+			ret);
+		goto free_cpufreq;
+	}
+
+	printk(KERN_INFO "fb%d: %s frame buffer device\n",
+		fbinfo->node, fbinfo->fix.id);
+
+	return 0;
+
+free_cpufreq:
+	nuc900fb_cpufreq_deregister(fbi);
+free_video_memory:
+	nuc900fb_unmap_video_memory(fbinfo);
+release_clock:
+	clk_disable(fbi->clk);
+	clk_put(fbi->clk);
+release_irq:
+	free_irq(irq, fbi);
+release_regs:
+	iounmap(fbi->io);
+release_mem_region:
+	release_mem_region((unsigned long)fbi->mem, size);
+free_fb:
+	framebuffer_release(fbinfo);
+	return ret;
+}
+
+/*
+ * shutdown the lcd controller
+ */
+static void nuc900fb_stop_lcd(struct fb_info *info)
+{
+	struct nuc900fb_info *fbi = info->par;
+	void __iomem *regs = fbi->io;
+
+	writel((~LCM_DCCS_DISP_INT_EN) | (~LCM_DCCS_VA_EN) | (~LCM_DCCS_OSD_EN),
+		regs + REG_LCM_DCCS);
+}
+
+/*
+ *  Cleanup
+ */
+static int nuc900fb_remove(struct platform_device *pdev)
+{
+	struct fb_info *fbinfo = platform_get_drvdata(pdev);
+	struct nuc900fb_info *fbi = fbinfo->par;
+	int irq;
+
+	nuc900fb_stop_lcd(fbinfo);
+	msleep(1);
+
+	nuc900fb_unmap_video_memory(fbinfo);
+
+	iounmap(fbi->io);
+
+	irq = platform_get_irq(pdev, 0);
+	free_irq(irq, fbi);
+
+	release_resource(fbi->mem);
+	kfree(fbi->mem);
+
+	platform_set_drvdata(pdev, NULL);
+	framebuffer_release(fbinfo);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+
+/*
+ *	suspend and resume support for the lcd controller
+ */
+
+static int nuc900fb_suspend(struct platform_device *dev, pm_message_t state)
+{
+	struct fb_info	   *fbinfo = platform_get_drvdata(dev);
+	struct nuc900fb_info *info = fbinfo->par;
+
+	nuc900fb_stop_lcd();
+	msleep(1);
+	clk_disable(info->clk);
+	return 0;
+}
+
+static int nuc900fb_resume(struct platform_device *dev)
+{
+	struct fb_info	   *fbinfo = platform_get_drvdata(dev);
+	struct nuc900fb_info *fbi = fbinfo->par;
+
+	printk(KERN_INFO "nuc900fb resume\n");
+
+	clk_enable(fbi->clk);
+	msleep(1);
+
+	nuc900fb_init_registers(fbinfo);
+	nuc900fb_activate_var(bfinfo);
+
+	return 0;
+}
+
+#else
+#define nuc900fb_suspend NULL
+#define nuc900fb_resume  NULL
+#endif
+
+static struct platform_driver nuc900fb_driver = {
+	.probe		= nuc900fb_probe,
+	.remove		= nuc900fb_remove,
+	.suspend	= nuc900fb_suspend,
+	.resume		= nuc900fb_resume,
+	.driver		= {
+		.name	= "nuc900-lcd",
+		.owner	= THIS_MODULE,
+	},
+};
+
+int __devinit nuc900fb_init(void)
+{
+	return platform_driver_register(&nuc900fb_driver);
+}
+
+static void __exit nuc900fb_cleanup(void)
+{
+	platform_driver_unregister(&nuc900fb_driver);
+}
+
+module_init(nuc900fb_init);
+module_exit(nuc900fb_cleanup);
+
+MODULE_DESCRIPTION("Framebuffer driver for the NUC900");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/nuc900fb.h b/drivers/video/nuc900fb.h
new file mode 100644
index 000000000000..6c23aa3d3b89
--- /dev/null
+++ b/drivers/video/nuc900fb.h
@@ -0,0 +1,55 @@
+/*
+ *
+ * Copyright (c) 2009 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ *   Auther:
+ *        Wang Qiang(rurality.linux@gmail.com)  2009/12/16
+ */
+
+#ifndef __NUC900FB_H
+#define __NUC900FB_H
+
+#include <mach/map.h>
+#include <mach/fb.h>
+
+enum nuc900_lcddrv_type {
+	LCDDRV_NUC910,
+	LCDDRV_NUC930,
+	LCDDRV_NUC932,
+	LCDDRV_NUC950,
+	LCDDRV_NUC960,
+};
+
+
+#define PALETTE_BUFFER_SIZE	256
+#define PALETTE_BUFF_CLEAR 	(0x80000000) /* entry is clear/invalid */
+
+struct nuc900fb_info {
+	struct device		*dev;
+	struct clk		*clk;
+
+	struct resource		*mem;
+	void __iomem		*io;
+	void __iomem		*irq_base;
+	int 			drv_type;
+	struct nuc900fb_hw	regs;
+	unsigned long		clk_rate;
+
+#ifdef CONFIG_CPU_FREQ
+	struct notifier_block	freq_transition;
+#endif
+
+	/* keep these registers in case we need to re-write palette */
+	u32			palette_buffer[PALETTE_BUFFER_SIZE];
+	u32			pseudo_pal[16];
+};
+
+int nuc900fb_init(void);
+
+#endif /* __NUC900FB_H */
diff --git a/drivers/video/nvidia/nv_backlight.c b/drivers/video/nvidia/nv_backlight.c
index 443e3c85a9a0..2fb552a6f32c 100644
--- a/drivers/video/nvidia/nv_backlight.c
+++ b/drivers/video/nvidia/nv_backlight.c
@@ -94,6 +94,7 @@ static struct backlight_ops nvidia_bl_ops = {
 
 void nvidia_bl_init(struct nvidia_par *par)
 {
+	struct backlight_properties props;
 	struct fb_info *info = pci_get_drvdata(par->pci_dev);
 	struct backlight_device *bd;
 	char name[12];
@@ -109,7 +110,10 @@ void nvidia_bl_init(struct nvidia_par *par)
 
 	snprintf(name, sizeof(name), "nvidiabl%d", info->node);
 
-	bd = backlight_device_register(name, info->dev, par, &nvidia_bl_ops);
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.max_brightness = FB_BACKLIGHT_LEVELS - 1;
+	bd = backlight_device_register(name, info->dev, par, &nvidia_bl_ops,
+				       &props);
 	if (IS_ERR(bd)) {
 		info->bl_dev = NULL;
 		printk(KERN_WARNING "nvidia: Backlight registration failed\n");
@@ -121,7 +125,6 @@ void nvidia_bl_init(struct nvidia_par *par)
 		0x158 * FB_BACKLIGHT_MAX / MAX_LEVEL,
 		0x534 * FB_BACKLIGHT_MAX / MAX_LEVEL);
 
-	bd->props.max_brightness = FB_BACKLIGHT_LEVELS - 1;
 	bd->props.brightness = bd->props.max_brightness;
 	bd->props.power = FB_BLANK_UNBLANK;
 	backlight_update_status(bd);
diff --git a/drivers/video/omap/lcdc.c b/drivers/video/omap/lcdc.c
index a33483910dc8..9557f963662e 100644
--- a/drivers/video/omap/lcdc.c
+++ b/drivers/video/omap/lcdc.c
@@ -389,7 +389,7 @@ static int omap_lcdc_enable_plane(int plane, int enable)
 /*
  * Configure the LCD DMA for a palette load operation and do the palette
  * downloading synchronously. We don't use the frame+palette load mode of
- * the controller, since the palette can always be downloaded seperately.
+ * the controller, since the palette can always be downloaded separately.
  */
 static void load_palette(void)
 {
diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c
index fcd6a61a91eb..59769e85d41c 100644
--- a/drivers/video/omap2/displays/panel-taal.c
+++ b/drivers/video/omap2/displays/panel-taal.c
@@ -486,6 +486,7 @@ static struct attribute_group taal_attr_group = {
 
 static int taal_probe(struct omap_dss_device *dssdev)
 {
+	struct backlight_properties props;
 	struct taal_data *td;
 	struct backlight_device *bldev;
 	int r;
@@ -520,11 +521,16 @@ static int taal_probe(struct omap_dss_device *dssdev)
 
 	/* if no platform set_backlight() defined, presume DSI backlight
 	 * control */
+	memset(&props, 0, sizeof(struct backlight_properties));
 	if (!dssdev->set_backlight)
 		td->use_dsi_bl = true;
 
+	if (td->use_dsi_bl)
+		props.max_brightness = 255;
+	else
+		props.max_brightness = 127;
 	bldev = backlight_device_register("taal", &dssdev->dev, dssdev,
-			&taal_bl_ops);
+					  &taal_bl_ops, &props);
 	if (IS_ERR(bldev)) {
 		r = PTR_ERR(bldev);
 		goto err2;
@@ -534,13 +540,10 @@ static int taal_probe(struct omap_dss_device *dssdev)
 
 	bldev->props.fb_blank = FB_BLANK_UNBLANK;
 	bldev->props.power = FB_BLANK_UNBLANK;
-	if (td->use_dsi_bl) {
-		bldev->props.max_brightness = 255;
+	if (td->use_dsi_bl)
 		bldev->props.brightness = 255;
-	} else {
-		bldev->props.max_brightness = 127;
+	else
 		bldev->props.brightness = 127;
-	}
 
 	taal_bl_update_status(bldev);
 
diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c
index 913142d4cab1..9acef00c47ea 100644
--- a/drivers/video/omap2/dss/manager.c
+++ b/drivers/video/omap2/dss/manager.c
@@ -341,7 +341,7 @@ static ssize_t manager_attr_store(struct kobject *kobj, struct attribute *attr,
 	return manager_attr->store(manager, buf, size);
 }
 
-static struct sysfs_ops manager_sysfs_ops = {
+static const struct sysfs_ops manager_sysfs_ops = {
 	.show = manager_attr_show,
 	.store = manager_attr_store,
 };
diff --git a/drivers/video/omap2/dss/overlay.c b/drivers/video/omap2/dss/overlay.c
index 0c5bea263ac6..aed3f3194347 100644
--- a/drivers/video/omap2/dss/overlay.c
+++ b/drivers/video/omap2/dss/overlay.c
@@ -320,7 +320,7 @@ static ssize_t overlay_attr_store(struct kobject *kobj, struct attribute *attr,
 	return overlay_attr->store(overlay, buf, size);
 }
 
-static struct sysfs_ops overlay_sysfs_ops = {
+static const struct sysfs_ops overlay_sysfs_ops = {
 	.show = overlay_attr_show,
 	.store = overlay_attr_store,
 };
diff --git a/drivers/video/pm2fb.c b/drivers/video/pm2fb.c
index 36436ee6c1a4..27f93aab6ddc 100644
--- a/drivers/video/pm2fb.c
+++ b/drivers/video/pm2fb.c
@@ -896,7 +896,7 @@ static int pm2fb_setcolreg(unsigned regno, unsigned red, unsigned green,
 	 * Pseudocolor:
 	 *    uses offset = 0 && length = DAC register width.
 	 *    var->{color}.offset is 0
-	 *    var->{color}.length contains widht of DAC
+	 *    var->{color}.length contains width of DAC
 	 *    cmap is not used
 	 *    DAC[X] is programmed to (red, green, blue)
 	 * Truecolor:
diff --git a/drivers/video/q40fb.c b/drivers/video/q40fb.c
index 4beac1df617b..de40a626dc76 100644
--- a/drivers/video/q40fb.c
+++ b/drivers/video/q40fb.c
@@ -85,7 +85,7 @@ static struct fb_ops q40fb_ops = {
 	.fb_imageblit	= cfb_imageblit,
 };
 
-static int __init q40fb_probe(struct platform_device *dev)
+static int __devinit q40fb_probe(struct platform_device *dev)
 {
 	struct fb_info *info;
 
diff --git a/drivers/video/riva/fbdev.c b/drivers/video/riva/fbdev.c
index d94c57ffbdb1..618f36bec10d 100644
--- a/drivers/video/riva/fbdev.c
+++ b/drivers/video/riva/fbdev.c
@@ -338,6 +338,7 @@ static struct backlight_ops riva_bl_ops = {
 
 static void riva_bl_init(struct riva_par *par)
 {
+	struct backlight_properties props;
 	struct fb_info *info = pci_get_drvdata(par->pdev);
 	struct backlight_device *bd;
 	char name[12];
@@ -353,7 +354,10 @@ static void riva_bl_init(struct riva_par *par)
 
 	snprintf(name, sizeof(name), "rivabl%d", info->node);
 
-	bd = backlight_device_register(name, info->dev, par, &riva_bl_ops);
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.max_brightness = FB_BACKLIGHT_LEVELS - 1;
+	bd = backlight_device_register(name, info->dev, par, &riva_bl_ops,
+				       &props);
 	if (IS_ERR(bd)) {
 		info->bl_dev = NULL;
 		printk(KERN_WARNING "riva: Backlight registration failed\n");
@@ -365,7 +369,6 @@ static void riva_bl_init(struct riva_par *par)
 		MIN_LEVEL * FB_BACKLIGHT_MAX / MAX_LEVEL,
 		FB_BACKLIGHT_MAX);
 
-	bd->props.max_brightness = FB_BACKLIGHT_LEVELS - 1;
 	bd->props.brightness = bd->props.max_brightness;
 	bd->props.power = FB_BLANK_UNBLANK;
 	backlight_update_status(bd);
diff --git a/drivers/video/s1d13xxxfb.c b/drivers/video/s1d13xxxfb.c
index 0deb0a8867b7..7b63429f1a7c 100644
--- a/drivers/video/s1d13xxxfb.c
+++ b/drivers/video/s1d13xxxfb.c
@@ -517,12 +517,12 @@ s1d13xxxfb_bitblt_copyarea(struct fb_info *info, const struct fb_copyarea *area)
 		src = (sy * stride) + (bpp * sx);
 	}
 
-	/* set source adress */
+	/* set source address */
 	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_SRC_START0, (src & 0xff));
 	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_SRC_START1, (src >> 8) & 0x00ff);
 	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_SRC_START2, (src >> 16) & 0x00ff);
 
-	/* set destination adress */
+	/* set destination address */
 	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START0, (dst & 0xff));
 	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START1, (dst >> 8) & 0x00ff);
 	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START2, (dst >> 16) & 0x00ff);
diff --git a/drivers/video/s3c2410fb.c b/drivers/video/s3c2410fb.c
index aac661225c78..2b094dec4a56 100644
--- a/drivers/video/s3c2410fb.c
+++ b/drivers/video/s3c2410fb.c
@@ -1004,12 +1004,12 @@ dealloc_fb:
 	return ret;
 }
 
-static int __init s3c2410fb_probe(struct platform_device *pdev)
+static int __devinit s3c2410fb_probe(struct platform_device *pdev)
 {
 	return s3c24xxfb_probe(pdev, DRV_S3C2410);
 }
 
-static int __init s3c2412fb_probe(struct platform_device *pdev)
+static int __devinit s3c2412fb_probe(struct platform_device *pdev)
 {
 	return s3c24xxfb_probe(pdev, DRV_S3C2412);
 }
diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c
index cdaa873a6054..e8b76d65a070 100644
--- a/drivers/video/sa1100fb.c
+++ b/drivers/video/sa1100fb.c
@@ -1435,7 +1435,7 @@ static struct sa1100fb_info * __init sa1100fb_init_fbinfo(struct device *dev)
 	return fbi;
 }
 
-static int __init sa1100fb_probe(struct platform_device *pdev)
+static int __devinit sa1100fb_probe(struct platform_device *pdev)
 {
 	struct sa1100fb_info *fbi;
 	int ret, irq;
diff --git a/drivers/video/sgivwfb.c b/drivers/video/sgivwfb.c
index f86012239bff..7a3a5e28eca1 100644
--- a/drivers/video/sgivwfb.c
+++ b/drivers/video/sgivwfb.c
@@ -745,7 +745,7 @@ int __init sgivwfb_setup(char *options)
 /*
  *  Initialisation
  */
-static int __init sgivwfb_probe(struct platform_device *dev)
+static int __devinit sgivwfb_probe(struct platform_device *dev)
 {
 	struct sgivw_par *par;
 	struct fb_info *info;
diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index 8d7653e56df5..bbd1dbf4026a 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -943,7 +943,7 @@ static const struct dev_pm_ops sh_mobile_lcdc_dev_pm_ops = {
 
 static int sh_mobile_lcdc_remove(struct platform_device *pdev);
 
-static int __init sh_mobile_lcdc_probe(struct platform_device *pdev)
+static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev)
 {
 	struct fb_info *info;
 	struct sh_mobile_lcdc_priv *priv;
diff --git a/drivers/video/sis/sis_main.c b/drivers/video/sis/sis_main.c
index 9d2b6bc49036..a531a0f7cdf2 100644
--- a/drivers/video/sis/sis_main.c
+++ b/drivers/video/sis/sis_main.c
@@ -1891,9 +1891,6 @@ static struct fb_ops sisfb_ops = {
 	.fb_fillrect	= fbcon_sis_fillrect,
 	.fb_copyarea	= fbcon_sis_copyarea,
 	.fb_imageblit	= cfb_imageblit,
-#ifdef CONFIG_FB_SOFT_CURSOR
-	.fb_cursor	= soft_cursor,
-#endif
 	.fb_sync	= fbcon_sis_sync,
 #ifdef SIS_NEW_CONFIG_COMPAT
 	.fb_compat_ioctl= sisfb_ioctl,
diff --git a/drivers/video/sm501fb.c b/drivers/video/sm501fb.c
index 35370d0ecf03..b7dc1800efa9 100644
--- a/drivers/video/sm501fb.c
+++ b/drivers/video/sm501fb.c
@@ -411,7 +411,7 @@ static int sm501fb_set_par_common(struct fb_info *info,
 	struct sm501fb_par  *par = info->par;
 	struct sm501fb_info *fbi = par->info;
 	unsigned long pixclock;      /* pixelclock in Hz */
-	unsigned long sm501pixclock; /* pixelclock the 501 can achive in Hz */
+	unsigned long sm501pixclock; /* pixelclock the 501 can achieve in Hz */
 	unsigned int mem_type;
 	unsigned int clock_type;
 	unsigned int head_addr;
diff --git a/drivers/video/sstfb.c b/drivers/video/sstfb.c
index 609d0a521ca2..79840f11fecb 100644
--- a/drivers/video/sstfb.c
+++ b/drivers/video/sstfb.c
@@ -1102,7 +1102,7 @@ static void sst_set_vidmod_ics(struct fb_info *info, const int bpp)
  * detect dac type
  * prerequisite : write to FbiInitx enabled, video and fbi and pci fifo reset,
  * dram refresh disabled, FbiInit remaped.
- * TODO: mmh.. maybe i shoud put the "prerequisite" in the func ...
+ * TODO: mmh.. maybe i should put the "prerequisite" in the func ...
  */
 
 
diff --git a/drivers/video/sunxvr1000.c b/drivers/video/sunxvr1000.c
new file mode 100644
index 000000000000..a8248c0b9192
--- /dev/null
+++ b/drivers/video/sunxvr1000.c
@@ -0,0 +1,228 @@
+/* sunxvr1000.c: Sun XVR-1000 driver for sparc64 systems
+ *
+ * Copyright (C) 2010 David S. Miller (davem@davemloft.net)
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/of_device.h>
+
+struct gfb_info {
+	struct fb_info		*info;
+
+	char __iomem		*fb_base;
+	unsigned long		fb_base_phys;
+
+	struct device_node	*of_node;
+
+	unsigned int		width;
+	unsigned int		height;
+	unsigned int		depth;
+	unsigned int		fb_size;
+
+	u32			pseudo_palette[16];
+};
+
+static int __devinit gfb_get_props(struct gfb_info *gp)
+{
+	gp->width = of_getintprop_default(gp->of_node, "width", 0);
+	gp->height = of_getintprop_default(gp->of_node, "height", 0);
+	gp->depth = of_getintprop_default(gp->of_node, "depth", 32);
+
+	if (!gp->width || !gp->height) {
+		printk(KERN_ERR "gfb: Critical properties missing for %s\n",
+		       gp->of_node->full_name);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int gfb_setcolreg(unsigned regno,
+			 unsigned red, unsigned green, unsigned blue,
+			 unsigned transp, struct fb_info *info)
+{
+	u32 value;
+
+	if (regno < 16) {
+		red >>= 8;
+		green >>= 8;
+		blue >>= 8;
+
+		value = (blue << 16) | (green << 8) | red;
+		((u32 *)info->pseudo_palette)[regno] = value;
+	}
+
+	return 0;
+}
+
+static struct fb_ops gfb_ops = {
+	.owner			= THIS_MODULE,
+	.fb_setcolreg		= gfb_setcolreg,
+	.fb_fillrect		= cfb_fillrect,
+	.fb_copyarea		= cfb_copyarea,
+	.fb_imageblit		= cfb_imageblit,
+};
+
+static int __devinit gfb_set_fbinfo(struct gfb_info *gp)
+{
+	struct fb_info *info = gp->info;
+	struct fb_var_screeninfo *var = &info->var;
+
+	info->flags = FBINFO_DEFAULT;
+	info->fbops = &gfb_ops;
+	info->screen_base = gp->fb_base;
+	info->screen_size = gp->fb_size;
+
+	info->pseudo_palette = gp->pseudo_palette;
+
+	/* Fill fix common fields */
+	strlcpy(info->fix.id, "gfb", sizeof(info->fix.id));
+        info->fix.smem_start = gp->fb_base_phys;
+        info->fix.smem_len = gp->fb_size;
+        info->fix.type = FB_TYPE_PACKED_PIXELS;
+	if (gp->depth == 32 || gp->depth == 24)
+		info->fix.visual = FB_VISUAL_TRUECOLOR;
+	else
+		info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+
+	var->xres = gp->width;
+	var->yres = gp->height;
+	var->xres_virtual = var->xres;
+	var->yres_virtual = var->yres;
+	var->bits_per_pixel = gp->depth;
+
+	var->red.offset = 0;
+	var->red.length = 8;
+	var->green.offset = 8;
+	var->green.length = 8;
+	var->blue.offset = 16;
+	var->blue.length = 8;
+	var->transp.offset = 0;
+	var->transp.length = 0;
+
+	if (fb_alloc_cmap(&info->cmap, 256, 0)) {
+		printk(KERN_ERR "gfb: Cannot allocate color map.\n");
+		return -ENOMEM;
+	}
+
+        return 0;
+}
+
+static int __devinit gfb_probe(struct of_device *op,
+			       const struct of_device_id *match)
+{
+	struct device_node *dp = op->node;
+	struct fb_info *info;
+	struct gfb_info *gp;
+	int err;
+
+	info = framebuffer_alloc(sizeof(struct gfb_info), &op->dev);
+	if (!info) {
+		printk(KERN_ERR "gfb: Cannot allocate fb_info\n");
+		err = -ENOMEM;
+		goto err_out;
+	}
+
+	gp = info->par;
+	gp->info = info;
+	gp->of_node = dp;
+
+	gp->fb_base_phys = op->resource[6].start;
+
+	err = gfb_get_props(gp);
+	if (err)
+		goto err_release_fb;
+
+	/* Framebuffer length is the same regardless of resolution. */
+	info->fix.line_length = 16384;
+	gp->fb_size = info->fix.line_length * gp->height;
+
+	gp->fb_base = of_ioremap(&op->resource[6], 0,
+				 gp->fb_size, "gfb fb");
+	if (!gp->fb_base)
+		goto err_release_fb;
+
+	err = gfb_set_fbinfo(gp);
+	if (err)
+		goto err_unmap_fb;
+
+	printk("gfb: Found device at %s\n", dp->full_name);
+
+	err = register_framebuffer(info);
+	if (err < 0) {
+		printk(KERN_ERR "gfb: Could not register framebuffer %s\n",
+		       dp->full_name);
+		goto err_unmap_fb;
+	}
+
+	dev_set_drvdata(&op->dev, info);
+
+	return 0;
+
+err_unmap_fb:
+	of_iounmap(&op->resource[6], gp->fb_base, gp->fb_size);
+
+err_release_fb:
+        framebuffer_release(info);
+
+err_out:
+	return err;
+}
+
+static int __devexit gfb_remove(struct of_device *op)
+{
+	struct fb_info *info = dev_get_drvdata(&op->dev);
+	struct gfb_info *gp = info->par;
+
+	unregister_framebuffer(info);
+
+	iounmap(gp->fb_base);
+
+	of_iounmap(&op->resource[6], gp->fb_base, gp->fb_size);
+
+        framebuffer_release(info);
+
+	dev_set_drvdata(&op->dev, NULL);
+
+	return 0;
+}
+
+static const struct of_device_id gfb_match[] = {
+	{
+		.name = "SUNW,gfb",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, ffb_match);
+
+static struct of_platform_driver gfb_driver = {
+	.name		= "gfb",
+	.match_table	= gfb_match,
+	.probe		= gfb_probe,
+	.remove		= __devexit_p(gfb_remove),
+};
+
+static int __init gfb_init(void)
+{
+	if (fb_get_options("gfb", NULL))
+		return -ENODEV;
+
+	return of_register_driver(&gfb_driver, &of_bus_type);
+}
+
+static void __exit gfb_exit(void)
+{
+	of_unregister_driver(&gfb_driver);
+}
+
+module_init(gfb_init);
+module_exit(gfb_exit);
+
+MODULE_DESCRIPTION("framebuffer driver for Sun XVR-1000 graphics");
+MODULE_AUTHOR("David S. Miller <davem@davemloft.net>");
+MODULE_VERSION("1.0");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/vesafb.c b/drivers/video/vesafb.c
index bd37ee1f6a25..ef4128c8e57a 100644
--- a/drivers/video/vesafb.c
+++ b/drivers/video/vesafb.c
@@ -226,7 +226,7 @@ static int __init vesafb_setup(char *options)
 	return 0;
 }
 
-static int __init vesafb_probe(struct platform_device *dev)
+static int __devinit vesafb_probe(struct platform_device *dev)
 {
 	struct fb_info *info;
 	int i, err;
diff --git a/drivers/video/vfb.c b/drivers/video/vfb.c
index 050d432c7d95..b8ab995fbda7 100644
--- a/drivers/video/vfb.c
+++ b/drivers/video/vfb.c
@@ -479,7 +479,7 @@ static int __init vfb_setup(char *options)
      *  Initialisation
      */
 
-static int __init vfb_probe(struct platform_device *dev)
+static int __devinit vfb_probe(struct platform_device *dev)
 {
 	struct fb_info *info;
 	int retval = -ENOMEM;
diff --git a/drivers/video/vga16fb.c b/drivers/video/vga16fb.c
index 5b2938903ac2..76d8dae5b1bb 100644
--- a/drivers/video/vga16fb.c
+++ b/drivers/video/vga16fb.c
@@ -1293,7 +1293,7 @@ static int vga16fb_setup(char *options)
 }
 #endif
 
-static int __init vga16fb_probe(struct platform_device *dev)
+static int __devinit vga16fb_probe(struct platform_device *dev)
 {
 	struct fb_info *info;
 	struct vga16fb_par *par;
diff --git a/drivers/video/via/Makefile b/drivers/video/via/Makefile
index e533b4b6aba4..eeed238ad6a2 100644
--- a/drivers/video/via/Makefile
+++ b/drivers/video/via/Makefile
@@ -4,4 +4,4 @@
 
 obj-$(CONFIG_FB_VIA) += viafb.o
 
-viafb-y	:=viafbdev.o hw.o iface.o  via_i2c.o dvi.o lcd.o ioctl.o accel.o via_utility.o vt1636.o global.o tblDPASetting.o viamode.o tbl1636.o
+viafb-y	:=viafbdev.o hw.o via_i2c.o dvi.o lcd.o ioctl.o accel.o via_utility.o vt1636.o global.o tblDPASetting.o viamode.o tbl1636.o
diff --git a/drivers/video/via/chip.h b/drivers/video/via/chip.h
index 474f428aea92..8c06bd3c0b4d 100644
--- a/drivers/video/via/chip.h
+++ b/drivers/video/via/chip.h
@@ -107,7 +107,6 @@
 struct tmds_chip_information {
 	int tmds_chip_name;
 	int tmds_chip_slave_addr;
-	int dvi_panel_id;
 	int data_mode;
 	int output_interface;
 	int i2c_port;
@@ -142,14 +141,9 @@ struct tmds_setting_information {
 	int iga_path;
 	int h_active;
 	int v_active;
-	int bpp;
-	int refresh_rate;
-	int get_dvi_size_method;
 	int max_pixel_clock;
-	int dvi_panel_size;
-	int dvi_panel_hres;
-	int dvi_panel_vres;
-	int native_size;
+	int max_hres;
+	int max_vres;
 };
 
 struct lvds_setting_information {
@@ -160,7 +154,6 @@ struct lvds_setting_information {
 	int refresh_rate;
 	int get_lcd_size_method;
 	int lcd_panel_id;
-	int lcd_panel_size;
 	int lcd_panel_hres;
 	int lcd_panel_vres;
 	int display_method;
diff --git a/drivers/video/via/dvi.c b/drivers/video/via/dvi.c
index 67b36932212b..abe59b8c7a05 100644
--- a/drivers/video/via/dvi.c
+++ b/drivers/video/via/dvi.c
@@ -23,11 +23,10 @@
 static void tmds_register_write(int index, u8 data);
 static int tmds_register_read(int index);
 static int tmds_register_read_bytes(int index, u8 *buff, int buff_len);
-static int check_reduce_blanking_mode(int mode_index,
-	int refresh_rate);
-static int dvi_get_panel_size_from_DDCv1(void);
-static int dvi_get_panel_size_from_DDCv2(void);
-static unsigned char dvi_get_panel_info(void);
+static void dvi_get_panel_size_from_DDCv1(struct tmds_chip_information
+	*tmds_chip, struct tmds_setting_information *tmds_setting);
+static void dvi_get_panel_size_from_DDCv2(struct tmds_chip_information
+	*tmds_chip, struct tmds_setting_information *tmds_setting);
 static int viafb_dvi_query_EDID(void);
 
 static int check_tmds_chip(int device_id_subaddr, int device_id)
@@ -38,23 +37,24 @@ static int check_tmds_chip(int device_id_subaddr, int device_id)
 		return FAIL;
 }
 
-void viafb_init_dvi_size(void)
+void viafb_init_dvi_size(struct tmds_chip_information *tmds_chip,
+	struct tmds_setting_information *tmds_setting)
 {
 	DEBUG_MSG(KERN_INFO "viafb_init_dvi_size()\n");
-	DEBUG_MSG(KERN_INFO
-		"viaparinfo->tmds_setting_info->get_dvi_size_method %d\n",
-		  viaparinfo->tmds_setting_info->get_dvi_size_method);
 
-	switch (viaparinfo->tmds_setting_info->get_dvi_size_method) {
-	case GET_DVI_SIZE_BY_SYSTEM_BIOS:
+	viafb_dvi_sense();
+	switch (viafb_dvi_query_EDID()) {
+	case 1:
+		dvi_get_panel_size_from_DDCv1(tmds_chip, tmds_setting);
 		break;
-	case GET_DVI_SZIE_BY_HW_STRAPPING:
+	case 2:
+		dvi_get_panel_size_from_DDCv2(tmds_chip, tmds_setting);
 		break;
-	case GET_DVI_SIZE_BY_VGA_BIOS:
 	default:
-		dvi_get_panel_info();
+		printk(KERN_WARNING "viafb_init_dvi_size: DVI panel size undetected!\n");
 		break;
 	}
+
 	return;
 }
 
@@ -189,42 +189,14 @@ static int tmds_register_read_bytes(int index, u8 *buff, int buff_len)
 	return 0;
 }
 
-static int check_reduce_blanking_mode(int mode_index,
-	int refresh_rate)
-{
-	if (refresh_rate != 60)
-		return false;
-
-	switch (mode_index) {
-		/* Following modes have reduce blanking mode. */
-	case VIA_RES_1360X768:
-	case VIA_RES_1400X1050:
-	case VIA_RES_1440X900:
-	case VIA_RES_1600X900:
-	case VIA_RES_1680X1050:
-	case VIA_RES_1920X1080:
-	case VIA_RES_1920X1200:
-		break;
-
-	default:
-		DEBUG_MSG(KERN_INFO
-			  "This dvi mode %d have no reduce blanking mode!\n",
-			  mode_index);
-		return false;
-	}
-
-	return true;
-}
-
 /* DVI Set Mode */
-void viafb_dvi_set_mode(int video_index, int mode_bpp, int set_iga)
+void viafb_dvi_set_mode(struct VideoModeTable *mode, int mode_bpp,
+	int set_iga)
 {
-	struct VideoModeTable *videoMode = NULL;
+	struct VideoModeTable *rb_mode;
 	struct crt_mode_table *pDviTiming;
 	unsigned long desirePixelClock, maxPixelClock;
-	int status = 0;
-	videoMode = viafb_get_modetbl_pointer(video_index);
-	pDviTiming = videoMode->crtc;
+	pDviTiming = mode->crtc;
 	desirePixelClock = pDviTiming->clk / 1000000;
 	maxPixelClock = (unsigned long)viaparinfo->
 		tmds_setting_info->max_pixel_clock;
@@ -232,20 +204,14 @@ void viafb_dvi_set_mode(int video_index, int mode_bpp, int set_iga)
 	DEBUG_MSG(KERN_INFO "\nDVI_set_mode!!\n");
 
 	if ((maxPixelClock != 0) && (desirePixelClock > maxPixelClock)) {
-		/*Check if reduce-blanking mode is exist */
-		status =
-		    check_reduce_blanking_mode(video_index,
-					       pDviTiming->refresh_rate);
-		if (status) {
-			video_index += 100;	/*Use reduce-blanking mode */
-			videoMode = viafb_get_modetbl_pointer(video_index);
-			pDviTiming = videoMode->crtc;
-			DEBUG_MSG(KERN_INFO
-				  "DVI use reduce blanking mode %d!!\n",
-				  video_index);
+		rb_mode = viafb_get_rb_mode(mode->crtc[0].crtc.hor_addr,
+			mode->crtc[0].crtc.ver_addr);
+		if (rb_mode) {
+			mode = rb_mode;
+			pDviTiming = rb_mode->crtc;
 		}
 	}
-	viafb_fill_crtc_timing(pDviTiming, video_index, mode_bpp / 8, set_iga);
+	viafb_fill_crtc_timing(pDviTiming, mode, mode_bpp / 8, set_iga);
 	viafb_set_output_path(DEVICE_DVI, set_iga,
 			viaparinfo->chip_info->tmds_chip_info.output_interface);
 }
@@ -350,25 +316,18 @@ static int viafb_dvi_query_EDID(void)
 		return false;
 }
 
-/*
- *
- * int dvi_get_panel_size_from_DDCv1(void)
- *
- *     - Get Panel Size Using EDID1 Table
- *
- * Return Type:    int
- *
- */
-static int dvi_get_panel_size_from_DDCv1(void)
+/* Get Panel Size Using EDID1 Table */
+static void dvi_get_panel_size_from_DDCv1(struct tmds_chip_information
+	*tmds_chip, struct tmds_setting_information *tmds_setting)
 {
-	int i, max_h = 0, max_v = 0, tmp, restore;
+	int i, max_h = 0, tmp, restore;
 	unsigned char rData;
 	unsigned char EDID_DATA[18];
 
 	DEBUG_MSG(KERN_INFO "\n dvi_get_panel_size_from_DDCv1 \n");
 
-	restore = viaparinfo->chip_info->tmds_chip_info.tmds_chip_slave_addr;
-	viaparinfo->chip_info->tmds_chip_info.tmds_chip_slave_addr = 0xA0;
+	restore = tmds_chip->tmds_chip_slave_addr;
+	tmds_chip->tmds_chip_slave_addr = 0xA0;
 
 	rData = tmds_register_read(0x23);
 	if (rData & 0x3C)
@@ -414,8 +373,8 @@ static int dvi_get_panel_size_from_DDCv1(void)
 				/* The first two byte must be zero. */
 				if (EDID_DATA[3] == 0xFD) {
 					/* To get max pixel clock. */
-					viaparinfo->tmds_setting_info->
-					max_pixel_clock = EDID_DATA[9] * 10;
+					tmds_setting->max_pixel_clock =
+						EDID_DATA[9] * 10;
 				}
 			}
 			break;
@@ -425,154 +384,88 @@ static int dvi_get_panel_size_from_DDCv1(void)
 		}
 	}
 
+	tmds_setting->max_hres = max_h;
 	switch (max_h) {
 	case 640:
-		viaparinfo->tmds_setting_info->dvi_panel_size =
-			VIA_RES_640X480;
+		tmds_setting->max_vres = 480;
 		break;
 	case 800:
-		viaparinfo->tmds_setting_info->dvi_panel_size =
-			VIA_RES_800X600;
+		tmds_setting->max_vres = 600;
 		break;
 	case 1024:
-		viaparinfo->tmds_setting_info->dvi_panel_size =
-			VIA_RES_1024X768;
+		tmds_setting->max_vres = 768;
 		break;
 	case 1280:
-		viaparinfo->tmds_setting_info->dvi_panel_size =
-			VIA_RES_1280X1024;
+		tmds_setting->max_vres = 1024;
 		break;
 	case 1400:
-		viaparinfo->tmds_setting_info->dvi_panel_size =
-			VIA_RES_1400X1050;
+		tmds_setting->max_vres = 1050;
 		break;
 	case 1440:
-		viaparinfo->tmds_setting_info->dvi_panel_size =
-			VIA_RES_1440X1050;
+		tmds_setting->max_vres = 1050;
 		break;
 	case 1600:
-		viaparinfo->tmds_setting_info->dvi_panel_size =
-			VIA_RES_1600X1200;
+		tmds_setting->max_vres = 1200;
 		break;
 	case 1920:
-		if (max_v == 1200) {
-			viaparinfo->tmds_setting_info->dvi_panel_size =
-				VIA_RES_1920X1200;
-		} else {
-			viaparinfo->tmds_setting_info->dvi_panel_size =
-				VIA_RES_1920X1080;
-		}
-
+		tmds_setting->max_vres = 1080;
 		break;
 	default:
-		viaparinfo->tmds_setting_info->dvi_panel_size =
-			VIA_RES_1024X768;
-		DEBUG_MSG(KERN_INFO "Unknown panel size max resolution = %d !\
-					 set default panel size.\n", max_h);
+		DEBUG_MSG(KERN_INFO "Unknown panel size max resolution = %d ! "
+					 "set default panel size.\n", max_h);
 		break;
 	}
 
 	DEBUG_MSG(KERN_INFO "DVI max pixelclock = %d\n",
-		  viaparinfo->tmds_setting_info->max_pixel_clock);
-	viaparinfo->chip_info->tmds_chip_info.tmds_chip_slave_addr = restore;
-	return viaparinfo->tmds_setting_info->dvi_panel_size;
+		tmds_setting->max_pixel_clock);
+	tmds_chip->tmds_chip_slave_addr = restore;
 }
 
-/*
- *
- * int dvi_get_panel_size_from_DDCv2(void)
- *
- *     - Get Panel Size Using EDID2 Table
- *
- * Return Type:    int
- *
- */
-static int dvi_get_panel_size_from_DDCv2(void)
+/* Get Panel Size Using EDID2 Table */
+static void dvi_get_panel_size_from_DDCv2(struct tmds_chip_information
+	*tmds_chip, struct tmds_setting_information *tmds_setting)
 {
-	int HSize = 0, restore;
+	int restore;
 	unsigned char R_Buffer[2];
 
 	DEBUG_MSG(KERN_INFO "\n dvi_get_panel_size_from_DDCv2 \n");
 
-	restore = viaparinfo->chip_info->tmds_chip_info.tmds_chip_slave_addr;
-	viaparinfo->chip_info->tmds_chip_info.tmds_chip_slave_addr = 0xA2;
+	restore = tmds_chip->tmds_chip_slave_addr;
+	tmds_chip->tmds_chip_slave_addr = 0xA2;
 
 	/* Horizontal: 0x76, 0x77 */
 	tmds_register_read_bytes(0x76, R_Buffer, 2);
-	HSize = R_Buffer[0];
-	HSize += R_Buffer[1] << 8;
+	tmds_setting->max_hres = R_Buffer[0] + (R_Buffer[1] << 8);
 
-	switch (HSize) {
+	switch (tmds_setting->max_hres) {
 	case 640:
-		viaparinfo->tmds_setting_info->dvi_panel_size =
-			VIA_RES_640X480;
+		tmds_setting->max_vres = 480;
 		break;
 	case 800:
-		viaparinfo->tmds_setting_info->dvi_panel_size =
-			VIA_RES_800X600;
+		tmds_setting->max_vres = 600;
 		break;
 	case 1024:
-		viaparinfo->tmds_setting_info->dvi_panel_size =
-			VIA_RES_1024X768;
+		tmds_setting->max_vres = 768;
 		break;
 	case 1280:
-		viaparinfo->tmds_setting_info->dvi_panel_size =
-			VIA_RES_1280X1024;
+		tmds_setting->max_vres = 1024;
 		break;
 	case 1400:
-		viaparinfo->tmds_setting_info->dvi_panel_size =
-			VIA_RES_1400X1050;
+		tmds_setting->max_vres = 1050;
 		break;
 	case 1440:
-		viaparinfo->tmds_setting_info->dvi_panel_size =
-			VIA_RES_1440X1050;
+		tmds_setting->max_vres = 1050;
 		break;
 	case 1600:
-		viaparinfo->tmds_setting_info->dvi_panel_size =
-			VIA_RES_1600X1200;
-		break;
-	default:
-		viaparinfo->tmds_setting_info->dvi_panel_size =
-			VIA_RES_1024X768;
-		DEBUG_MSG(KERN_INFO "Unknown panel size max resolution = %d!\
-					set default panel size.\n", HSize);
-		break;
-	}
-
-	viaparinfo->chip_info->tmds_chip_info.tmds_chip_slave_addr = restore;
-	return viaparinfo->tmds_setting_info->dvi_panel_size;
-}
-
-/*
- *
- * unsigned char dvi_get_panel_info(void)
- *
- *     - Get Panel Size
- *
- * Return Type:    unsigned char
- */
-static unsigned char dvi_get_panel_info(void)
-{
-	unsigned char dvipanelsize;
-	DEBUG_MSG(KERN_INFO "dvi_get_panel_info! \n");
-
-	viafb_dvi_sense();
-	switch (viafb_dvi_query_EDID()) {
-	case 1:
-		dvi_get_panel_size_from_DDCv1();
-		break;
-	case 2:
-		dvi_get_panel_size_from_DDCv2();
+		tmds_setting->max_vres = 1200;
 		break;
 	default:
+		DEBUG_MSG(KERN_INFO "Unknown panel size max resolution = %d! "
+			"set default panel size.\n", tmds_setting->max_hres);
 		break;
 	}
 
-	DEBUG_MSG(KERN_INFO "dvi panel size is %2d \n",
-		  viaparinfo->tmds_setting_info->dvi_panel_size);
-	dvipanelsize = (unsigned char)(viaparinfo->
-		tmds_setting_info->dvi_panel_size);
-	return dvipanelsize;
+	tmds_chip->tmds_chip_slave_addr = restore;
 }
 
 /* If Disable DVI, turn off pad */
diff --git a/drivers/video/via/dvi.h b/drivers/video/via/dvi.h
index e1ec37fb0dc3..0dffcfd395f3 100644
--- a/drivers/video/via/dvi.h
+++ b/drivers/video/via/dvi.h
@@ -53,12 +53,13 @@
 #define     DEV_CONNECT_DVI     0x01
 #define     DEV_CONNECT_HDMI    0x02
 
-struct VideoModeTable *viafb_get_cea_mode_tbl_pointer(int Index);
 int viafb_dvi_sense(void);
 void viafb_dvi_disable(void);
 void viafb_dvi_enable(void);
 int viafb_tmds_trasmitter_identify(void);
-void viafb_init_dvi_size(void);
-void viafb_dvi_set_mode(int video_index, int mode_bpp, int set_iga);
+void viafb_init_dvi_size(struct tmds_chip_information *tmds_chip,
+	struct tmds_setting_information *tmds_setting);
+void viafb_dvi_set_mode(struct VideoModeTable *videoMode, int mode_bpp,
+	int set_iga);
 
 #endif /* __DVI_H__ */
diff --git a/drivers/video/via/global.c b/drivers/video/via/global.c
index b675cdbb03ad..1ee511b73307 100644
--- a/drivers/video/via/global.c
+++ b/drivers/video/via/global.c
@@ -23,15 +23,12 @@ int viafb_platform_epia_dvi = STATE_OFF;
 int viafb_device_lcd_dualedge = STATE_OFF;
 int viafb_bus_width = 12;
 int viafb_display_hardware_layout = HW_LAYOUT_LCD_DVI;
-int viafb_memsize;
 int viafb_DeviceStatus = CRT_Device;
 int viafb_hotplug;
 int viafb_refresh = 60;
 int viafb_refresh1 = 60;
 int viafb_lcd_dsp_method = LCD_EXPANDSION;
 int viafb_lcd_mode = LCD_OPENLDI;
-int viafb_bpp = 32;
-int viafb_bpp1 = 32;
 int viafb_CRT_ON = 1;
 int viafb_DVI_ON;
 int viafb_LCD_ON ;
@@ -42,8 +39,6 @@ int viafb_hotplug_Xres = 640;
 int viafb_hotplug_Yres = 480;
 int viafb_hotplug_bpp = 32;
 int viafb_hotplug_refresh = 60;
-unsigned int viafb_second_offset;
-int viafb_second_size;
 int viafb_primary_dev = None_Device;
 unsigned int viafb_second_xres = 640;
 unsigned int viafb_second_yres = 480;
diff --git a/drivers/video/via/global.h b/drivers/video/via/global.h
index d69d0ca99c2f..8d95d5fd1388 100644
--- a/drivers/video/via/global.h
+++ b/drivers/video/via/global.h
@@ -35,7 +35,6 @@
 
 #include "debug.h"
 
-#include "iface.h"
 #include "viafbdev.h"
 #include "chip.h"
 #include "accel.h"
@@ -68,8 +67,6 @@ extern int viafb_refresh;
 extern int viafb_refresh1;
 extern int viafb_lcd_dsp_method;
 extern int viafb_lcd_mode;
-extern int viafb_bpp;
-extern int viafb_bpp1;
 
 extern int viafb_CRT_ON;
 extern int viafb_hotplug_Xres;
diff --git a/drivers/video/via/hw.c b/drivers/video/via/hw.c
index 3e083ff67ae2..f2583b1b527f 100644
--- a/drivers/video/via/hw.c
+++ b/drivers/video/via/hw.c
@@ -524,7 +524,6 @@ static void dvi_patch_skew_dvp1(void);
 static void dvi_patch_skew_dvp_low(void);
 static void set_dvi_output_path(int set_iga, int output_interface);
 static void set_lcd_output_path(int set_iga, int output_interface);
-static int search_mode_setting(int ModeInfoIndex);
 static void load_fix_bit_crtc_reg(void);
 static void init_gfx_chip_info(struct pci_dev *pdev,
 				const struct pci_device_id *pdi);
@@ -686,6 +685,84 @@ void viafb_set_secondary_pitch(u32 pitch)
 	viafb_write_reg_mask(0x71, VIACR, (pitch >> (10 - 7)) & 0x80, 0x80);
 }
 
+void viafb_set_primary_color_depth(u8 depth)
+{
+	u8 value;
+
+	DEBUG_MSG(KERN_DEBUG "viafb_set_primary_color_depth(%d)\n", depth);
+	switch (depth) {
+	case 8:
+		value = 0x00;
+		break;
+	case 15:
+		value = 0x04;
+		break;
+	case 16:
+		value = 0x14;
+		break;
+	case 24:
+		value = 0x0C;
+		break;
+	case 30:
+		value = 0x08;
+		break;
+	default:
+		printk(KERN_WARNING "viafb_set_primary_color_depth: "
+			"Unsupported depth: %d\n", depth);
+		return;
+	}
+
+	viafb_write_reg_mask(0x15, VIASR, value, 0x1C);
+}
+
+void viafb_set_secondary_color_depth(u8 depth)
+{
+	u8 value;
+
+	DEBUG_MSG(KERN_DEBUG "viafb_set_secondary_color_depth(%d)\n", depth);
+	switch (depth) {
+	case 8:
+		value = 0x00;
+		break;
+	case 16:
+		value = 0x40;
+		break;
+	case 24:
+		value = 0xC0;
+		break;
+	case 30:
+		value = 0x80;
+		break;
+	default:
+		printk(KERN_WARNING "viafb_set_secondary_color_depth: "
+			"Unsupported depth: %d\n", depth);
+		return;
+	}
+
+	viafb_write_reg_mask(0x67, VIACR, value, 0xC0);
+}
+
+static void set_color_register(u8 index, u8 red, u8 green, u8 blue)
+{
+	outb(0xFF, 0x3C6); /* bit mask of palette */
+	outb(index, 0x3C8);
+	outb(red, 0x3C9);
+	outb(green, 0x3C9);
+	outb(blue, 0x3C9);
+}
+
+void viafb_set_primary_color_register(u8 index, u8 red, u8 green, u8 blue)
+{
+	viafb_write_reg_mask(0x1A, VIASR, 0x00, 0x01);
+	set_color_register(index, red, green, blue);
+}
+
+void viafb_set_secondary_color_register(u8 index, u8 red, u8 green, u8 blue)
+{
+	viafb_write_reg_mask(0x1A, VIASR, 0x01, 0x01);
+	set_color_register(index, red, green, blue);
+}
+
 void viafb_set_output_path(int device, int set_iga, int output_interface)
 {
 	switch (device) {
@@ -710,11 +787,8 @@ static void set_crt_output_path(int set_iga)
 		viafb_write_reg_mask(SR16, VIASR, 0x00, BIT6);
 		break;
 	case IGA2:
-	case IGA1_IGA2:
 		viafb_write_reg_mask(CR6A, VIACR, 0xC0, BIT6 + BIT7);
 		viafb_write_reg_mask(SR16, VIASR, 0x40, BIT6);
-		if (set_iga == IGA1_IGA2)
-			viafb_write_reg_mask(CR6B, VIACR, 0x08, BIT3);
 		break;
 	}
 }
@@ -904,13 +978,6 @@ static void set_lcd_output_path(int set_iga, int output_interface)
 
 		enable_second_display_channel();
 		break;
-
-	case IGA1_IGA2:
-		viafb_write_reg_mask(CR6B, VIACR, 0x08, BIT3);
-		viafb_write_reg_mask(CR6A, VIACR, 0x08, BIT3);
-
-		disable_second_display_channel();
-		break;
 	}
 
 	switch (output_interface) {
@@ -987,49 +1054,6 @@ static void set_lcd_output_path(int set_iga, int output_interface)
 	}
 }
 
-/* Search Mode Index */
-static int search_mode_setting(int ModeInfoIndex)
-{
-	int i = 0;
-
-	while ((i < NUM_TOTAL_MODETABLE) &&
-			(ModeInfoIndex != CLE266Modes[i].ModeIndex))
-		i++;
-	if (i >= NUM_TOTAL_MODETABLE)
-		i = 0;
-	return i;
-
-}
-
-struct VideoModeTable *viafb_get_modetbl_pointer(int Index)
-{
-	struct VideoModeTable *TmpTbl = NULL;
-	TmpTbl = &CLE266Modes[search_mode_setting(Index)];
-	return TmpTbl;
-}
-
-struct VideoModeTable *viafb_get_cea_mode_tbl_pointer(int Index)
-{
-	struct VideoModeTable *TmpTbl = NULL;
-	int i = 0;
-	while ((i < NUM_TOTAL_CEA_MODES) &&
-			(Index != CEA_HDMI_Modes[i].ModeIndex))
-		i++;
-	if ((i < NUM_TOTAL_CEA_MODES))
-		TmpTbl = &CEA_HDMI_Modes[i];
-	 else {
-		/*Still use general timing if don't find CEA timing */
-		i = 0;
-		while ((i < NUM_TOTAL_MODETABLE) &&
-				(Index != CLE266Modes[i].ModeIndex))
-		       i++;
-		if (i >= NUM_TOTAL_MODETABLE)
-			i = 0;
-		TmpTbl = &CLE266Modes[i];
-	}
-	return TmpTbl;
-}
-
 static void load_fix_bit_crtc_reg(void)
 {
 	/* always set to 1 */
@@ -1121,15 +1145,13 @@ void viafb_load_fetch_count_reg(int h_addr, int bpp_byte, int set_iga)
 	struct io_register *reg = NULL;
 
 	switch (set_iga) {
-	case IGA1_IGA2:
 	case IGA1:
 		reg_value = IGA1_FETCH_COUNT_FORMULA(h_addr, bpp_byte);
 		viafb_load_reg_num = fetch_count_reg.
 			iga1_fetch_count_reg.reg_num;
 		reg = fetch_count_reg.iga1_fetch_count_reg.reg;
 		viafb_load_reg(reg_value, viafb_load_reg_num, reg, VIASR);
-		if (set_iga == IGA1)
-			break;
+		break;
 	case IGA2:
 		reg_value = IGA2_FETCH_COUNT_FORMULA(h_addr, bpp_byte);
 		viafb_load_reg_num = fetch_count_reg.
@@ -1499,7 +1521,7 @@ void viafb_set_vclock(u32 CLK, int set_iga)
 	/* H.W. Reset : ON */
 	viafb_write_reg_mask(CR17, VIACR, 0x00, BIT7);
 
-	if ((set_iga == IGA1) || (set_iga == IGA1_IGA2)) {
+	if (set_iga == IGA1) {
 		/* Change D,N FOR VCLK */
 		switch (viaparinfo->chip_info->gfx_chip_name) {
 		case UNICHROME_CLE266:
@@ -1528,7 +1550,7 @@ void viafb_set_vclock(u32 CLK, int set_iga)
 		}
 	}
 
-	if ((set_iga == IGA2) || (set_iga == IGA1_IGA2)) {
+	if (set_iga == IGA2) {
 		/* Change D,N FOR LCK */
 		switch (viaparinfo->chip_info->gfx_chip_name) {
 		case UNICHROME_CLE266:
@@ -1557,12 +1579,12 @@ void viafb_set_vclock(u32 CLK, int set_iga)
 	viafb_write_reg_mask(CR17, VIACR, 0x80, BIT7);
 
 	/* Reset PLL */
-	if ((set_iga == IGA1) || (set_iga == IGA1_IGA2)) {
+	if (set_iga == IGA1) {
 		viafb_write_reg_mask(SR40, VIASR, 0x02, BIT1);
 		viafb_write_reg_mask(SR40, VIASR, 0x00, BIT1);
 	}
 
-	if ((set_iga == IGA2) || (set_iga == IGA1_IGA2)) {
+	if (set_iga == IGA2) {
 		viafb_write_reg_mask(SR40, VIASR, 0x01, BIT0);
 		viafb_write_reg_mask(SR40, VIASR, 0x00, BIT0);
 	}
@@ -1805,47 +1827,15 @@ void viafb_load_crtc_timing(struct display_timing device_timing,
 	viafb_lock_crt();
 }
 
-void viafb_set_color_depth(int bpp_byte, int set_iga)
-{
-	if (set_iga == IGA1) {
-		switch (bpp_byte) {
-		case MODE_8BPP:
-			viafb_write_reg_mask(SR15, VIASR, 0x22, 0x7E);
-			break;
-		case MODE_16BPP:
-			viafb_write_reg_mask(SR15, VIASR, 0xB6, 0xFE);
-			break;
-		case MODE_32BPP:
-			viafb_write_reg_mask(SR15, VIASR, 0xAE, 0xFE);
-			break;
-		}
-	} else {
-		switch (bpp_byte) {
-		case MODE_8BPP:
-			viafb_write_reg_mask(CR67, VIACR, 0x00, BIT6 + BIT7);
-			break;
-		case MODE_16BPP:
-			viafb_write_reg_mask(CR67, VIACR, 0x40, BIT6 + BIT7);
-			break;
-		case MODE_32BPP:
-			viafb_write_reg_mask(CR67, VIACR, 0xC0, BIT6 + BIT7);
-			break;
-		}
-	}
-}
-
 void viafb_fill_crtc_timing(struct crt_mode_table *crt_table,
-	int mode_index, int bpp_byte, int set_iga)
+	struct VideoModeTable *video_mode, int bpp_byte, int set_iga)
 {
-	struct VideoModeTable *video_mode;
 	struct display_timing crt_reg;
 	int i;
 	int index = 0;
 	int h_addr, v_addr;
 	u32 pll_D_N;
 
-	video_mode = &CLE266Modes[search_mode_setting(mode_index)];
-
 	for (i = 0; i < video_mode->mode_array; i++) {
 		index = i;
 
@@ -1858,8 +1848,10 @@ void viafb_fill_crtc_timing(struct crt_mode_table *crt_table,
 
 	/* Mode 640x480 has border, but LCD/DFP didn't have border. */
 	/* So we would delete border. */
-	if ((viafb_LCD_ON | viafb_DVI_ON) && (mode_index == VIA_RES_640X480)
-	    && (viaparinfo->crt_setting_info->refresh_rate == 60)) {
+	if ((viafb_LCD_ON | viafb_DVI_ON)
+	    && video_mode->crtc[0].crtc.hor_addr == 640
+	    && video_mode->crtc[0].crtc.ver_addr == 480
+	    && viaparinfo->crt_setting_info->refresh_rate == 60) {
 		/* The border is 8 pixels. */
 		crt_reg.hor_blank_start = crt_reg.hor_blank_start - 8;
 
@@ -1912,9 +1904,6 @@ void viafb_fill_crtc_timing(struct crt_mode_table *crt_table,
 	    && (viaparinfo->chip_info->gfx_chip_name != UNICHROME_K400))
 		viafb_load_FIFO_reg(set_iga, h_addr, v_addr);
 
-	/* load SR Register About Memory and Color part */
-	viafb_set_color_depth(bpp_byte, set_iga);
-
 	pll_D_N = viafb_get_clk_value(crt_table[index].clk);
 	DEBUG_MSG(KERN_INFO "PLL=%x", pll_D_N);
 	viafb_set_vclock(pll_D_N, set_iga);
@@ -1956,9 +1945,6 @@ void viafb_update_device_setting(int hres, int vres,
 
 		viaparinfo->tmds_setting_info->h_active = hres;
 		viaparinfo->tmds_setting_info->v_active = vres;
-		viaparinfo->tmds_setting_info->bpp = bpp;
-		viaparinfo->tmds_setting_info->refresh_rate =
-			vmode_refresh;
 
 		viaparinfo->lvds_setting_info->h_active = hres;
 		viaparinfo->lvds_setting_info->v_active = vres;
@@ -1975,9 +1961,6 @@ void viafb_update_device_setting(int hres, int vres,
 		if (viaparinfo->tmds_setting_info->iga_path == IGA2) {
 			viaparinfo->tmds_setting_info->h_active = hres;
 			viaparinfo->tmds_setting_info->v_active = vres;
-			viaparinfo->tmds_setting_info->bpp = bpp;
-			viaparinfo->tmds_setting_info->refresh_rate =
-				vmode_refresh;
 		}
 
 		if (viaparinfo->lvds_setting_info->iga_path == IGA2) {
@@ -2076,9 +2059,8 @@ static void init_tmds_chip_info(void)
 
 	DEBUG_MSG(KERN_INFO "TMDS Chip = %d\n",
 		  viaparinfo->chip_info->tmds_chip_info.tmds_chip_name);
-	viaparinfo->tmds_setting_info->get_dvi_size_method =
-		GET_DVI_SIZE_BY_VGA_BIOS;
-	viafb_init_dvi_size();
+	viafb_init_dvi_size(&viaparinfo->shared->chip_info.tmds_chip_info,
+		&viaparinfo->shared->tmds_setting_info);
 }
 
 static void init_lvds_chip_info(void)
@@ -2195,28 +2177,19 @@ static void set_display_channel(void)
 	}
 }
 
-int viafb_setmode(int vmode_index, int hor_res, int ver_res, int video_bpp,
-	int vmode_index1, int hor_res1, int ver_res1, int video_bpp1)
+int viafb_setmode(struct VideoModeTable *vmode_tbl, int video_bpp,
+	struct VideoModeTable *vmode_tbl1, int video_bpp1)
 {
 	int i, j;
 	int port;
 	u8 value, index, mask;
-	struct VideoModeTable *vmode_tbl;
 	struct crt_mode_table *crt_timing;
-	struct VideoModeTable *vmode_tbl1 = NULL;
 	struct crt_mode_table *crt_timing1 = NULL;
 
-	DEBUG_MSG(KERN_INFO "Set Mode!!\n");
-	DEBUG_MSG(KERN_INFO
-		  "vmode_index=%d hor_res=%d ver_res=%d video_bpp=%d\n",
-		  vmode_index, hor_res, ver_res, video_bpp);
-
 	device_screen_off();
-	vmode_tbl = &CLE266Modes[search_mode_setting(vmode_index)];
 	crt_timing = vmode_tbl->crtc;
 
 	if (viafb_SAMM_ON == 1) {
-		vmode_tbl1 = &CLE266Modes[search_mode_setting(vmode_index1)];
 		crt_timing1 = vmode_tbl1->crtc;
 	}
 
@@ -2267,12 +2240,11 @@ int viafb_setmode(int vmode_index, int hor_res, int ver_res, int video_bpp,
 		outb(VPIT.SR[i - 1], VIASR + 1);
 	}
 
-	viafb_set_primary_address(0);
-	viafb_set_secondary_address(viafb_SAMM_ON ? viafb_second_offset : 0);
+	viafb_write_reg_mask(0x15, VIASR, 0xA2, 0xA2);
 	viafb_set_iga_path();
 
 	/* Write CRTC */
-	viafb_fill_crtc_timing(crt_timing, vmode_index, video_bpp / 8, IGA1);
+	viafb_fill_crtc_timing(crt_timing, vmode_tbl, video_bpp / 8, IGA1);
 
 	/* Write Graphic Controller */
 	for (i = 0; i < StdGR; i++) {
@@ -2292,65 +2264,25 @@ int viafb_setmode(int vmode_index, int hor_res, int ver_res, int video_bpp,
 
 	/* Update Patch Register */
 
-	if ((viaparinfo->chip_info->gfx_chip_name == UNICHROME_CLE266)
-	    || (viaparinfo->chip_info->gfx_chip_name == UNICHROME_K400)) {
-		for (i = 0; i < NUM_TOTAL_PATCH_MODE; i++) {
-			if (res_patch_table[i].mode_index == vmode_index) {
-				for (j = 0;
-				     j < res_patch_table[i].table_length; j++) {
-					index =
-					    res_patch_table[i].
-					    io_reg_table[j].index;
-					port =
-					    res_patch_table[i].
-					    io_reg_table[j].port;
-					value =
-					    res_patch_table[i].
-					    io_reg_table[j].value;
-					mask =
-					    res_patch_table[i].
-					    io_reg_table[j].mask;
-					viafb_write_reg_mask(index, port, value,
-						       mask);
-				}
-			}
-		}
-	}
-
-	if (viafb_SAMM_ON == 1) {
-		if ((viaparinfo->chip_info->gfx_chip_name == UNICHROME_CLE266)
-		    || (viaparinfo->chip_info->gfx_chip_name ==
-		    UNICHROME_K400)) {
-			for (i = 0; i < NUM_TOTAL_PATCH_MODE; i++) {
-				if (res_patch_table[i].mode_index ==
-				    vmode_index1) {
-					for (j = 0;
-					     j <
-					     res_patch_table[i].
-					     table_length; j++) {
-						index =
-						    res_patch_table[i].
-						    io_reg_table[j].index;
-						port =
-						    res_patch_table[i].
-						    io_reg_table[j].port;
-						value =
-						    res_patch_table[i].
-						    io_reg_table[j].value;
-						mask =
-						    res_patch_table[i].
-						    io_reg_table[j].mask;
-						viafb_write_reg_mask(index,
-							port, value, mask);
-					}
-				}
-			}
+	if ((viaparinfo->chip_info->gfx_chip_name == UNICHROME_CLE266
+	    || viaparinfo->chip_info->gfx_chip_name == UNICHROME_K400)
+	    && vmode_tbl->crtc[0].crtc.hor_addr == 1024
+	    && vmode_tbl->crtc[0].crtc.ver_addr == 768) {
+		for (j = 0; j < res_patch_table[0].table_length; j++) {
+			index = res_patch_table[0].io_reg_table[j].index;
+			port = res_patch_table[0].io_reg_table[j].port;
+			value = res_patch_table[0].io_reg_table[j].value;
+			mask = res_patch_table[0].io_reg_table[j].mask;
+			viafb_write_reg_mask(index, port, value, mask);
 		}
 	}
 
 	viafb_set_primary_pitch(viafbinfo->fix.line_length);
 	viafb_set_secondary_pitch(viafb_dual_fb ? viafbinfo1->fix.line_length
 		: viafbinfo->fix.line_length);
+	viafb_set_primary_color_depth(viaparinfo->depth);
+	viafb_set_secondary_color_depth(viafb_dual_fb ? viaparinfo1->depth
+		: viaparinfo->depth);
 	/* Update Refresh Rate Setting */
 
 	/* Clear On Screen */
@@ -2359,11 +2291,11 @@ int viafb_setmode(int vmode_index, int hor_res, int ver_res, int video_bpp,
 	if (viafb_CRT_ON) {
 		if (viafb_SAMM_ON && (viaparinfo->crt_setting_info->iga_path ==
 			IGA2)) {
-			viafb_fill_crtc_timing(crt_timing1, vmode_index1,
+			viafb_fill_crtc_timing(crt_timing1, vmode_tbl1,
 				video_bpp1 / 8,
 				viaparinfo->crt_setting_info->iga_path);
 		} else {
-			viafb_fill_crtc_timing(crt_timing, vmode_index,
+			viafb_fill_crtc_timing(crt_timing, vmode_tbl,
 				video_bpp / 8,
 				viaparinfo->crt_setting_info->iga_path);
 		}
@@ -2373,7 +2305,7 @@ int viafb_setmode(int vmode_index, int hor_res, int ver_res, int video_bpp,
 		/* Patch if set_hres is not 8 alignment (1366) to viafb_setmode
 		to 8 alignment (1368),there is several pixels (2 pixels)
 		on right side of screen. */
-		if (hor_res % 8) {
+		if (vmode_tbl->crtc[0].crtc.hor_addr % 8) {
 			viafb_unlock_crt();
 			viafb_write_reg(CR02, VIACR,
 				viafb_read_reg(VIACR, CR02) - 1);
@@ -2384,14 +2316,14 @@ int viafb_setmode(int vmode_index, int hor_res, int ver_res, int video_bpp,
 	if (viafb_DVI_ON) {
 		if (viafb_SAMM_ON &&
 			(viaparinfo->tmds_setting_info->iga_path == IGA2)) {
-			viafb_dvi_set_mode(viafb_get_mode_index
+			viafb_dvi_set_mode(viafb_get_mode
 				     (viaparinfo->tmds_setting_info->h_active,
 				      viaparinfo->tmds_setting_info->
 				      v_active),
 				     video_bpp1, viaparinfo->
 				     tmds_setting_info->iga_path);
 		} else {
-			viafb_dvi_set_mode(viafb_get_mode_index
+			viafb_dvi_set_mode(viafb_get_mode
 				     (viaparinfo->tmds_setting_info->h_active,
 				      viaparinfo->
 				      tmds_setting_info->v_active),
@@ -2445,8 +2377,8 @@ int viafb_setmode(int vmode_index, int hor_res, int ver_res, int video_bpp,
 
 	/* If set mode normally, save resolution information for hot-plug . */
 	if (!viafb_hotplug) {
-		viafb_hotplug_Xres = hor_res;
-		viafb_hotplug_Yres = ver_res;
+		viafb_hotplug_Xres = vmode_tbl->crtc[0].crtc.hor_addr;
+		viafb_hotplug_Yres = vmode_tbl->crtc[0].crtc.ver_addr;
 		viafb_hotplug_bpp = video_bpp;
 		viafb_hotplug_refresh = viafb_refresh;
 
@@ -2706,13 +2638,11 @@ void viafb_set_dpa_gfx(int output_interface, struct GFX_DPA_SETTING\
 
 /*According var's xres, yres fill var's other timing information*/
 void viafb_fill_var_timing_info(struct fb_var_screeninfo *var, int refresh,
-			  int mode_index)
+	struct VideoModeTable *vmode_tbl)
 {
-	struct VideoModeTable *vmode_tbl = NULL;
 	struct crt_mode_table *crt_timing = NULL;
 	struct display_timing crt_reg;
 	int i = 0, index = 0;
-	vmode_tbl = &CLE266Modes[search_mode_setting(mode_index)];
 	crt_timing = vmode_tbl->crtc;
 	for (i = 0; i < vmode_tbl->mode_array; i++) {
 		index = i;
@@ -2721,36 +2651,6 @@ void viafb_fill_var_timing_info(struct fb_var_screeninfo *var, int refresh,
 	}
 
 	crt_reg = crt_timing[index].crtc;
-	switch (var->bits_per_pixel) {
-	case 8:
-		var->red.offset = 0;
-		var->green.offset = 0;
-		var->blue.offset = 0;
-		var->red.length = 6;
-		var->green.length = 6;
-		var->blue.length = 6;
-		break;
-	case 16:
-		var->red.offset = 11;
-		var->green.offset = 5;
-		var->blue.offset = 0;
-		var->red.length = 5;
-		var->green.length = 6;
-		var->blue.length = 5;
-		break;
-	case 32:
-		var->red.offset = 16;
-		var->green.offset = 8;
-		var->blue.offset = 0;
-		var->red.length = 8;
-		var->green.length = 8;
-		var->blue.length = 8;
-		break;
-	default:
-		/* never happed, put here to keep consistent */
-		break;
-	}
-
 	var->pixclock = viafb_get_pixclock(var->xres, var->yres, refresh);
 	var->left_margin =
 	    crt_reg.hor_total - (crt_reg.hor_sync_start + crt_reg.hor_sync_end);
diff --git a/drivers/video/via/hw.h b/drivers/video/via/hw.h
index b874d952b446..12ef32d334cb 100644
--- a/drivers/video/via/hw.h
+++ b/drivers/video/via/hw.h
@@ -22,6 +22,7 @@
 #ifndef __HW_H__
 #define __HW_H__
 
+#include "viamode.h"
 #include "global.h"
 
 /***************************************************
@@ -862,8 +863,6 @@ struct pci_device_id_info {
 };
 
 extern unsigned int viafb_second_virtual_xres;
-extern unsigned int viafb_second_offset;
-extern int viafb_second_size;
 extern int viafb_SAMM_ON;
 extern int viafb_dual_fb;
 extern int viafb_LCD2_ON;
@@ -874,8 +873,9 @@ extern int viafb_hotplug;
 void viafb_write_reg_mask(u8 index, int io_port, u8 data, u8 mask);
 void viafb_set_output_path(int device, int set_iga,
 	int output_interface);
+
 void viafb_fill_crtc_timing(struct crt_mode_table *crt_table,
-		      int mode_index, int bpp_byte, int set_iga);
+	struct VideoModeTable *video_mode, int bpp_byte, int set_iga);
 
 void viafb_set_vclock(u32 CLK, int set_iga);
 void viafb_load_reg(int timing_value, int viafb_load_reg_num,
@@ -891,16 +891,15 @@ void viafb_lock_crt(void);
 void viafb_unlock_crt(void);
 void viafb_load_fetch_count_reg(int h_addr, int bpp_byte, int set_iga);
 void viafb_write_regx(struct io_reg RegTable[], int ItemNum);
-struct VideoModeTable *viafb_get_modetbl_pointer(int Index);
 u32 viafb_get_clk_value(int clk);
 void viafb_load_FIFO_reg(int set_iga, int hor_active, int ver_active);
-void viafb_set_color_depth(int bpp_byte, int set_iga);
 void viafb_set_dpa_gfx(int output_interface, struct GFX_DPA_SETTING\
 					*p_gfx_dpa_setting);
 
-int viafb_setmode(int vmode_index, int hor_res, int ver_res,
-	    int video_bpp, int vmode_index1, int hor_res1,
-	    int ver_res1, int video_bpp1);
+int viafb_setmode(struct VideoModeTable *vmode_tbl, int video_bpp,
+	struct VideoModeTable *vmode_tbl1, int video_bpp1);
+void viafb_fill_var_timing_info(struct fb_var_screeninfo *var, int refresh,
+	struct VideoModeTable *vmode_tbl);
 void viafb_init_chip_info(struct pci_dev *pdev,
 			  const struct pci_device_id *pdi);
 void viafb_init_dac(int set_iga);
@@ -915,6 +914,8 @@ void viafb_set_primary_address(u32 addr);
 void viafb_set_secondary_address(u32 addr);
 void viafb_set_primary_pitch(u32 pitch);
 void viafb_set_secondary_pitch(u32 pitch);
+void viafb_set_primary_color_register(u8 index, u8 red, u8 green, u8 blue);
+void viafb_set_secondary_color_register(u8 index, u8 red, u8 green, u8 blue);
 void viafb_get_fb_info(unsigned int *fb_base, unsigned int *fb_len);
 
 #endif /* __HW_H__ */
diff --git a/drivers/video/via/iface.c b/drivers/video/via/iface.c
deleted file mode 100644
index 1570636c8d51..000000000000
--- a/drivers/video/via/iface.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Copyright 1998-2008 VIA Technologies, Inc. All Rights Reserved.
- * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
-
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public
- * License as published by the Free Software Foundation;
- * either version 2, or (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
- * the implied warranty of MERCHANTABILITY or FITNESS FOR
- * A PARTICULAR PURPOSE.See the GNU General Public License
- * for more details.
-
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#include "global.h"
-
-/* Get frame buffer size from VGA BIOS */
-
-unsigned int viafb_get_memsize(void)
-{
-	unsigned int m;
-
-	/* If memory size provided by user */
-	if (viafb_memsize)
-		m = viafb_memsize * Mb;
-	else {
-		m = (unsigned int)viafb_read_reg(VIASR, SR39);
-		m = m * (4 * Mb);
-
-		if ((m < (16 * Mb)) || (m > (64 * Mb)))
-			m = 16 * Mb;
-	}
-	DEBUG_MSG(KERN_INFO "framebuffer size = %d Mb\n", m / Mb);
-	return m;
-}
-
-/* Get Video Buffer Starting Physical Address(back door)*/
-
-unsigned long viafb_get_videobuf_addr(void)
-{
-	struct pci_dev *pdev = NULL;
-	unsigned char sys_mem;
-	unsigned char video_mem;
-	unsigned long sys_mem_size;
-	unsigned long video_mem_size;
-	/*system memory = 256 MB, video memory 64 MB */
-	unsigned long vmem_starting_adr = 0x0C000000;
-
-	pdev =
-	    (struct pci_dev *)pci_get_device(VIA_K800_BRIDGE_VID,
-					     VIA_K800_BRIDGE_DID, NULL);
-	if (pdev != NULL) {
-		pci_read_config_byte(pdev, VIA_K800_SYSTEM_MEMORY_REG,
-				     &sys_mem);
-		pci_read_config_byte(pdev, VIA_K800_VIDEO_MEMORY_REG,
-				     &video_mem);
-		video_mem = (video_mem & 0x70) >> 4;
-		sys_mem_size = ((unsigned long)sys_mem) << 24;
-		if (video_mem != 0)
-			video_mem_size = (1 << (video_mem)) * 1024 * 1024;
-		else
-			video_mem_size = 0;
-
-		vmem_starting_adr = sys_mem_size - video_mem_size;
-		pci_dev_put(pdev);
-	}
-
-	DEBUG_MSG(KERN_INFO "Video Memory Starting Address = %lx \n",
-		  vmem_starting_adr);
-	return vmem_starting_adr;
-}
diff --git a/drivers/video/via/iface.h b/drivers/video/via/iface.h
deleted file mode 100644
index 790ec3e3aea2..000000000000
--- a/drivers/video/via/iface.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * Copyright 1998-2008 VIA Technologies, Inc. All Rights Reserved.
- * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
-
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public
- * License as published by the Free Software Foundation;
- * either version 2, or (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
- * the implied warranty of MERCHANTABILITY or FITNESS FOR
- * A PARTICULAR PURPOSE.See the GNU General Public License
- * for more details.
-
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#ifndef __IFACE_H__
-#define __IFACE_H__
-
-#define Kb  (1024)
-#define Mb  (Kb*Kb)
-
-#define VIA_K800_BRIDGE_VID         0x1106
-#define VIA_K800_BRIDGE_DID         0x3204
-
-#define VIA_K800_SYSTEM_MEMORY_REG  0x47
-#define VIA_K800_VIDEO_MEMORY_REG   0xA1
-
-extern int viafb_memsize;
-unsigned int viafb_get_memsize(void);
-unsigned long viafb_get_videobuf_addr(void);
-
-#endif /* __IFACE_H__ */
diff --git a/drivers/video/via/lcd.c b/drivers/video/via/lcd.c
index 09353e2b92f6..1b1ccdc2d83d 100644
--- a/drivers/video/via/lcd.c
+++ b/drivers/video/via/lcd.c
@@ -22,25 +22,7 @@
 #include "global.h"
 #include "lcdtbl.h"
 
-static struct iga2_shadow_crtc_timing iga2_shadow_crtc_reg = {
-	/* IGA2 Shadow Horizontal Total */
-	{IGA2_SHADOW_HOR_TOTAL_REG_NUM, {{CR6D, 0, 7}, {CR71, 3, 3} } },
-	/* IGA2 Shadow Horizontal Blank End */
-	{IGA2_SHADOW_HOR_BLANK_END_REG_NUM, {{CR6E, 0, 7} } },
-	/* IGA2 Shadow Vertical Total */
-	{IGA2_SHADOW_VER_TOTAL_REG_NUM, {{CR6F, 0, 7}, {CR71, 0, 2} } },
-	/* IGA2 Shadow Vertical Addressable Video */
-	{IGA2_SHADOW_VER_ADDR_REG_NUM, {{CR70, 0, 7}, {CR71, 4, 6} } },
-	/* IGA2 Shadow Vertical Blank Start */
-	{IGA2_SHADOW_VER_BLANK_START_REG_NUM,
-	 {{CR72, 0, 7}, {CR74, 4, 6} } },
-	/* IGA2 Shadow Vertical Blank End */
-	{IGA2_SHADOW_VER_BLANK_END_REG_NUM, {{CR73, 0, 7}, {CR74, 0, 2} } },
-	/* IGA2 Shadow Vertical Sync Start */
-	{IGA2_SHADOW_VER_SYNC_START_REG_NUM, {{CR75, 0, 7}, {CR76, 4, 6} } },
-	/* IGA2 Shadow Vertical Sync End */
-	{IGA2_SHADOW_VER_SYNC_END_REG_NUM, {{CR76, 0, 3} } }
-};
+#define viafb_compact_res(x, y) (((x)<<16)|(y))
 
 static struct _lcd_scaling_factor lcd_scaling_factor = {
 	/* LCD Horizontal Scaling Factor Register */
@@ -59,16 +41,10 @@ static struct _lcd_scaling_factor lcd_scaling_factor_CLE = {
 
 static int check_lvds_chip(int device_id_subaddr, int device_id);
 static bool lvds_identify_integratedlvds(void);
-static int fp_id_to_vindex(int panel_id);
+static void fp_id_to_vindex(int panel_id);
 static int lvds_register_read(int index);
 static void load_lcd_scaling(int set_hres, int set_vres, int panel_hres,
 		      int panel_vres);
-static void load_lcd_k400_patch_tbl(int set_hres, int set_vres,
-	int panel_id);
-static void load_lcd_p880_patch_tbl(int set_hres, int set_vres,
-	int panel_id);
-static void load_lcd_patch_regs(int set_hres, int set_vres,
-	int panel_id, int set_iga);
 static void via_pitch_alignment_patch_lcd(
 	struct lvds_setting_information *plvds_setting_info,
 				   struct lvds_chip_information
@@ -98,8 +74,6 @@ static void check_diport_of_integrated_lvds(
 static struct display_timing lcd_centering_timging(struct display_timing
 					    mode_crt_reg,
 					   struct display_timing panel_crt_reg);
-static void load_crtc_shadow_timing(struct display_timing mode_timing,
-			     struct display_timing panel_timing);
 static void viafb_load_scaling_factor_for_p4m900(int set_hres,
 	int set_vres, int panel_hres, int panel_vres);
 
@@ -125,33 +99,24 @@ void viafb_init_lcd_size(void)
 		break;
 	case GET_LCD_SIZE_BY_VGA_BIOS:
 		DEBUG_MSG(KERN_INFO "Get LCD Size method by VGA BIOS !!\n");
-		viaparinfo->lvds_setting_info->lcd_panel_size =
-		    fp_id_to_vindex(viafb_lcd_panel_id);
+		fp_id_to_vindex(viafb_lcd_panel_id);
 		DEBUG_MSG(KERN_INFO "LCD Panel_ID = %d\n",
 			  viaparinfo->lvds_setting_info->lcd_panel_id);
-		DEBUG_MSG(KERN_INFO "LCD Panel Size = %d\n",
-			  viaparinfo->lvds_setting_info->lcd_panel_size);
 		break;
 	case GET_LCD_SIZE_BY_USER_SETTING:
 		DEBUG_MSG(KERN_INFO "Get LCD Size method by user setting !!\n");
-		viaparinfo->lvds_setting_info->lcd_panel_size =
-		    fp_id_to_vindex(viafb_lcd_panel_id);
+		fp_id_to_vindex(viafb_lcd_panel_id);
 		DEBUG_MSG(KERN_INFO "LCD Panel_ID = %d\n",
 			  viaparinfo->lvds_setting_info->lcd_panel_id);
-		DEBUG_MSG(KERN_INFO "LCD Panel Size = %d\n",
-			  viaparinfo->lvds_setting_info->lcd_panel_size);
 		break;
 	default:
 		DEBUG_MSG(KERN_INFO "viafb_init_lcd_size fail\n");
 		viaparinfo->lvds_setting_info->lcd_panel_id =
 			LCD_PANEL_ID1_800X600;
-		viaparinfo->lvds_setting_info->lcd_panel_size =
-		    fp_id_to_vindex(LCD_PANEL_ID1_800X600);
+		fp_id_to_vindex(LCD_PANEL_ID1_800X600);
 	}
 	viaparinfo->lvds_setting_info2->lcd_panel_id =
 		viaparinfo->lvds_setting_info->lcd_panel_id;
-	viaparinfo->lvds_setting_info2->lcd_panel_size =
-		viaparinfo->lvds_setting_info->lcd_panel_size;
 	viaparinfo->lvds_setting_info2->lcd_panel_hres =
 		viaparinfo->lvds_setting_info->lcd_panel_hres;
 	viaparinfo->lvds_setting_info2->lcd_panel_vres =
@@ -171,13 +136,13 @@ static bool lvds_identify_integratedlvds(void)
 		if (viaparinfo->chip_info->lvds_chip_info.lvds_chip_name) {
 			viaparinfo->chip_info->lvds_chip_info2.lvds_chip_name =
 			    INTEGRATED_LVDS;
-			DEBUG_MSG(KERN_INFO "Support two dual channel LVDS!\
-				  (Internal LVDS + External LVDS)\n");
+			DEBUG_MSG(KERN_INFO "Support two dual channel LVDS! "
+				  "(Internal LVDS + External LVDS)\n");
 		} else {
 			viaparinfo->chip_info->lvds_chip_info.lvds_chip_name =
 			    INTEGRATED_LVDS;
-			DEBUG_MSG(KERN_INFO "Not found external LVDS,\
-				  so can't support two dual channel LVDS!\n");
+			DEBUG_MSG(KERN_INFO "Not found external LVDS, "
+				  "so can't support two dual channel LVDS!\n");
 		}
 	} else if (viafb_display_hardware_layout == HW_LAYOUT_LCD1_LCD2) {
 		/* Two single channel LCD (Internal LVDS + Internal LVDS): */
@@ -185,8 +150,8 @@ static bool lvds_identify_integratedlvds(void)
 		INTEGRATED_LVDS;
 		viaparinfo->chip_info->lvds_chip_info2.lvds_chip_name =
 			INTEGRATED_LVDS;
-		DEBUG_MSG(KERN_INFO "Support two single channel LVDS!\
-			  (Internal LVDS + Internal LVDS)\n");
+		DEBUG_MSG(KERN_INFO "Support two single channel LVDS! "
+			  "(Internal LVDS + Internal LVDS)\n");
 	} else if (viafb_display_hardware_layout != HW_LAYOUT_DVI_ONLY) {
 		/* If we have found external LVDS, just use it,
 		   otherwise, we will use internal LVDS as default. */
@@ -248,7 +213,7 @@ int viafb_lvds_trasmitter_identify(void)
 	return FAIL;
 }
 
-static int fp_id_to_vindex(int panel_id)
+static void fp_id_to_vindex(int panel_id)
 {
 	DEBUG_MSG(KERN_INFO "fp_get_panel_id()\n");
 
@@ -264,7 +229,6 @@ static int fp_id_to_vindex(int panel_id)
 			LCD_PANEL_ID0_640X480;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 0;
 		viaparinfo->lvds_setting_info->LCDDithering = 1;
-		return VIA_RES_640X480;
 		break;
 	case 0x1:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 800;
@@ -273,7 +237,6 @@ static int fp_id_to_vindex(int panel_id)
 			LCD_PANEL_ID1_800X600;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 0;
 		viaparinfo->lvds_setting_info->LCDDithering = 1;
-		return VIA_RES_800X600;
 		break;
 	case 0x2:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1024;
@@ -282,7 +245,6 @@ static int fp_id_to_vindex(int panel_id)
 			LCD_PANEL_ID2_1024X768;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 0;
 		viaparinfo->lvds_setting_info->LCDDithering = 1;
-		return VIA_RES_1024X768;
 		break;
 	case 0x3:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1280;
@@ -291,7 +253,6 @@ static int fp_id_to_vindex(int panel_id)
 			LCD_PANEL_ID3_1280X768;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 0;
 		viaparinfo->lvds_setting_info->LCDDithering = 1;
-		return VIA_RES_1280X768;
 		break;
 	case 0x4:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1280;
@@ -300,7 +261,6 @@ static int fp_id_to_vindex(int panel_id)
 			LCD_PANEL_ID4_1280X1024;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 1;
 		viaparinfo->lvds_setting_info->LCDDithering = 1;
-		return VIA_RES_1280X1024;
 		break;
 	case 0x5:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1400;
@@ -309,7 +269,6 @@ static int fp_id_to_vindex(int panel_id)
 			LCD_PANEL_ID5_1400X1050;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 1;
 		viaparinfo->lvds_setting_info->LCDDithering = 1;
-		return VIA_RES_1400X1050;
 		break;
 	case 0x6:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1600;
@@ -318,7 +277,6 @@ static int fp_id_to_vindex(int panel_id)
 			LCD_PANEL_ID6_1600X1200;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 1;
 		viaparinfo->lvds_setting_info->LCDDithering = 1;
-		return VIA_RES_1600X1200;
 		break;
 	case 0x8:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 800;
@@ -327,7 +285,6 @@ static int fp_id_to_vindex(int panel_id)
 			LCD_PANEL_IDA_800X480;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 0;
 		viaparinfo->lvds_setting_info->LCDDithering = 1;
-		return VIA_RES_800X480;
 		break;
 	case 0x9:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1024;
@@ -336,7 +293,6 @@ static int fp_id_to_vindex(int panel_id)
 			LCD_PANEL_ID2_1024X768;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 1;
 		viaparinfo->lvds_setting_info->LCDDithering = 1;
-		return VIA_RES_1024X768;
 		break;
 	case 0xA:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1024;
@@ -345,7 +301,6 @@ static int fp_id_to_vindex(int panel_id)
 			LCD_PANEL_ID2_1024X768;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 0;
 		viaparinfo->lvds_setting_info->LCDDithering = 0;
-		return VIA_RES_1024X768;
 		break;
 	case 0xB:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1024;
@@ -354,7 +309,6 @@ static int fp_id_to_vindex(int panel_id)
 			LCD_PANEL_ID2_1024X768;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 1;
 		viaparinfo->lvds_setting_info->LCDDithering = 0;
-		return VIA_RES_1024X768;
 		break;
 	case 0xC:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1280;
@@ -363,7 +317,6 @@ static int fp_id_to_vindex(int panel_id)
 			LCD_PANEL_ID3_1280X768;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 0;
 		viaparinfo->lvds_setting_info->LCDDithering = 0;
-		return VIA_RES_1280X768;
 		break;
 	case 0xD:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1280;
@@ -372,7 +325,6 @@ static int fp_id_to_vindex(int panel_id)
 			LCD_PANEL_ID4_1280X1024;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 1;
 		viaparinfo->lvds_setting_info->LCDDithering = 0;
-		return VIA_RES_1280X1024;
 		break;
 	case 0xE:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1400;
@@ -381,7 +333,6 @@ static int fp_id_to_vindex(int panel_id)
 			LCD_PANEL_ID5_1400X1050;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 1;
 		viaparinfo->lvds_setting_info->LCDDithering = 0;
-		return VIA_RES_1400X1050;
 		break;
 	case 0xF:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1600;
@@ -390,7 +341,6 @@ static int fp_id_to_vindex(int panel_id)
 			LCD_PANEL_ID6_1600X1200;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 1;
 		viaparinfo->lvds_setting_info->LCDDithering = 0;
-		return VIA_RES_1600X1200;
 		break;
 	case 0x10:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1366;
@@ -399,7 +349,6 @@ static int fp_id_to_vindex(int panel_id)
 			LCD_PANEL_ID7_1366X768;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 0;
 		viaparinfo->lvds_setting_info->LCDDithering = 0;
-		return VIA_RES_1368X768;
 		break;
 	case 0x11:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1024;
@@ -408,7 +357,6 @@ static int fp_id_to_vindex(int panel_id)
 			LCD_PANEL_ID8_1024X600;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 0;
 		viaparinfo->lvds_setting_info->LCDDithering = 1;
-		return VIA_RES_1024X600;
 		break;
 	case 0x12:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1280;
@@ -417,7 +365,6 @@ static int fp_id_to_vindex(int panel_id)
 			LCD_PANEL_ID3_1280X768;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 1;
 		viaparinfo->lvds_setting_info->LCDDithering = 1;
-		return VIA_RES_1280X768;
 		break;
 	case 0x13:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1280;
@@ -426,7 +373,6 @@ static int fp_id_to_vindex(int panel_id)
 			LCD_PANEL_ID9_1280X800;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 0;
 		viaparinfo->lvds_setting_info->LCDDithering = 1;
-		return VIA_RES_1280X800;
 		break;
 	case 0x14:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1360;
@@ -435,7 +381,6 @@ static int fp_id_to_vindex(int panel_id)
 			LCD_PANEL_IDB_1360X768;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 0;
 		viaparinfo->lvds_setting_info->LCDDithering = 0;
-		return VIA_RES_1360X768;
 		break;
 	case 0x15:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1280;
@@ -444,7 +389,6 @@ static int fp_id_to_vindex(int panel_id)
 			LCD_PANEL_ID3_1280X768;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 1;
 		viaparinfo->lvds_setting_info->LCDDithering = 0;
-		return VIA_RES_1280X768;
 		break;
 	case 0x16:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 480;
@@ -453,7 +397,6 @@ static int fp_id_to_vindex(int panel_id)
 			LCD_PANEL_IDC_480X640;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 0;
 		viaparinfo->lvds_setting_info->LCDDithering = 1;
-		return VIA_RES_480X640;
 		break;
 	default:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 800;
@@ -462,7 +405,6 @@ static int fp_id_to_vindex(int panel_id)
 			LCD_PANEL_ID1_800X600;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 0;
 		viaparinfo->lvds_setting_info->LCDDithering = 1;
-		return VIA_RES_800X600;
 	}
 }
 
@@ -573,284 +515,6 @@ static void load_lcd_scaling(int set_hres, int set_vres, int panel_hres,
 	}
 }
 
-static void load_lcd_k400_patch_tbl(int set_hres, int set_vres,
-	int panel_id)
-{
-	int vmode_index;
-	int reg_num = 0;
-	struct io_reg *lcd_patch_reg = NULL;
-
-	vmode_index = viafb_get_mode_index(set_hres, set_vres);
-	switch (panel_id) {
-		/* LCD 800x600 */
-	case LCD_PANEL_ID1_800X600:
-		switch (vmode_index) {
-		case VIA_RES_640X400:
-		case VIA_RES_640X480:
-			reg_num = NUM_TOTAL_K400_LCD_RES_6X4_8X6;
-			lcd_patch_reg = K400_LCD_RES_6X4_8X6;
-			break;
-		case VIA_RES_720X480:
-		case VIA_RES_720X576:
-			reg_num = NUM_TOTAL_K400_LCD_RES_7X4_8X6;
-			lcd_patch_reg = K400_LCD_RES_7X4_8X6;
-			break;
-		}
-		break;
-
-		/* LCD 1024x768 */
-	case LCD_PANEL_ID2_1024X768:
-		switch (vmode_index) {
-		case VIA_RES_640X400:
-		case VIA_RES_640X480:
-			reg_num = NUM_TOTAL_K400_LCD_RES_6X4_10X7;
-			lcd_patch_reg = K400_LCD_RES_6X4_10X7;
-			break;
-		case VIA_RES_720X480:
-		case VIA_RES_720X576:
-			reg_num = NUM_TOTAL_K400_LCD_RES_7X4_10X7;
-			lcd_patch_reg = K400_LCD_RES_7X4_10X7;
-			break;
-		case VIA_RES_800X600:
-			reg_num = NUM_TOTAL_K400_LCD_RES_8X6_10X7;
-			lcd_patch_reg = K400_LCD_RES_8X6_10X7;
-			break;
-		}
-		break;
-
-		/* LCD 1280x1024 */
-	case LCD_PANEL_ID4_1280X1024:
-		switch (vmode_index) {
-		case VIA_RES_640X400:
-		case VIA_RES_640X480:
-			reg_num = NUM_TOTAL_K400_LCD_RES_6X4_12X10;
-			lcd_patch_reg = K400_LCD_RES_6X4_12X10;
-			break;
-		case VIA_RES_720X480:
-		case VIA_RES_720X576:
-			reg_num = NUM_TOTAL_K400_LCD_RES_7X4_12X10;
-			lcd_patch_reg = K400_LCD_RES_7X4_12X10;
-			break;
-		case VIA_RES_800X600:
-			reg_num = NUM_TOTAL_K400_LCD_RES_8X6_12X10;
-			lcd_patch_reg = K400_LCD_RES_8X6_12X10;
-			break;
-		case VIA_RES_1024X768:
-			reg_num = NUM_TOTAL_K400_LCD_RES_10X7_12X10;
-			lcd_patch_reg = K400_LCD_RES_10X7_12X10;
-			break;
-
-		}
-		break;
-
-		/* LCD 1400x1050 */
-	case LCD_PANEL_ID5_1400X1050:
-		switch (vmode_index) {
-		case VIA_RES_640X480:
-			reg_num = NUM_TOTAL_K400_LCD_RES_6X4_14X10;
-			lcd_patch_reg = K400_LCD_RES_6X4_14X10;
-			break;
-		case VIA_RES_800X600:
-			reg_num = NUM_TOTAL_K400_LCD_RES_8X6_14X10;
-			lcd_patch_reg = K400_LCD_RES_8X6_14X10;
-			break;
-		case VIA_RES_1024X768:
-			reg_num = NUM_TOTAL_K400_LCD_RES_10X7_14X10;
-			lcd_patch_reg = K400_LCD_RES_10X7_14X10;
-			break;
-		case VIA_RES_1280X768:
-		case VIA_RES_1280X800:
-		case VIA_RES_1280X960:
-		case VIA_RES_1280X1024:
-			reg_num = NUM_TOTAL_K400_LCD_RES_12X10_14X10;
-			lcd_patch_reg = K400_LCD_RES_12X10_14X10;
-			break;
-		}
-		break;
-
-		/* LCD 1600x1200 */
-	case LCD_PANEL_ID6_1600X1200:
-		switch (vmode_index) {
-		case VIA_RES_640X400:
-		case VIA_RES_640X480:
-			reg_num = NUM_TOTAL_K400_LCD_RES_6X4_16X12;
-			lcd_patch_reg = K400_LCD_RES_6X4_16X12;
-			break;
-		case VIA_RES_720X480:
-		case VIA_RES_720X576:
-			reg_num = NUM_TOTAL_K400_LCD_RES_7X4_16X12;
-			lcd_patch_reg = K400_LCD_RES_7X4_16X12;
-			break;
-		case VIA_RES_800X600:
-			reg_num = NUM_TOTAL_K400_LCD_RES_8X6_16X12;
-			lcd_patch_reg = K400_LCD_RES_8X6_16X12;
-			break;
-		case VIA_RES_1024X768:
-			reg_num = NUM_TOTAL_K400_LCD_RES_10X7_16X12;
-			lcd_patch_reg = K400_LCD_RES_10X7_16X12;
-			break;
-		case VIA_RES_1280X768:
-		case VIA_RES_1280X800:
-		case VIA_RES_1280X960:
-		case VIA_RES_1280X1024:
-			reg_num = NUM_TOTAL_K400_LCD_RES_12X10_16X12;
-			lcd_patch_reg = K400_LCD_RES_12X10_16X12;
-			break;
-		}
-		break;
-
-		/* LCD 1366x768 */
-	case LCD_PANEL_ID7_1366X768:
-		switch (vmode_index) {
-		case VIA_RES_640X480:
-			reg_num = NUM_TOTAL_K400_LCD_RES_6X4_1366X7;
-			lcd_patch_reg = K400_LCD_RES_6X4_1366X7;
-			break;
-		case VIA_RES_720X480:
-		case VIA_RES_720X576:
-			reg_num = NUM_TOTAL_K400_LCD_RES_7X4_1366X7;
-			lcd_patch_reg = K400_LCD_RES_7X4_1366X7;
-			break;
-		case VIA_RES_800X600:
-			reg_num = NUM_TOTAL_K400_LCD_RES_8X6_1366X7;
-			lcd_patch_reg = K400_LCD_RES_8X6_1366X7;
-			break;
-		case VIA_RES_1024X768:
-			reg_num = NUM_TOTAL_K400_LCD_RES_10X7_1366X7;
-			lcd_patch_reg = K400_LCD_RES_10X7_1366X7;
-			break;
-		case VIA_RES_1280X768:
-		case VIA_RES_1280X800:
-		case VIA_RES_1280X960:
-		case VIA_RES_1280X1024:
-			reg_num = NUM_TOTAL_K400_LCD_RES_12X10_1366X7;
-			lcd_patch_reg = K400_LCD_RES_12X10_1366X7;
-			break;
-		}
-		break;
-
-		/* LCD 1360x768 */
-	case LCD_PANEL_IDB_1360X768:
-		break;
-	}
-	if (reg_num != 0) {
-		/* H.W. Reset : ON */
-		viafb_write_reg_mask(CR17, VIACR, 0x00, BIT7);
-
-		viafb_write_regx(lcd_patch_reg, reg_num);
-
-		/* H.W. Reset : OFF */
-		viafb_write_reg_mask(CR17, VIACR, 0x80, BIT7);
-
-		/* Reset PLL */
-		viafb_write_reg_mask(SR40, VIASR, 0x02, BIT1);
-		viafb_write_reg_mask(SR40, VIASR, 0x00, BIT1);
-
-		/* Fire! */
-		outb(inb(VIARMisc) | (BIT2 + BIT3), VIAWMisc);
-	}
-}
-
-static void load_lcd_p880_patch_tbl(int set_hres, int set_vres,
-	int panel_id)
-{
-	int vmode_index;
-	int reg_num = 0;
-	struct io_reg *lcd_patch_reg = NULL;
-
-	vmode_index = viafb_get_mode_index(set_hres, set_vres);
-
-	switch (panel_id) {
-	case LCD_PANEL_ID5_1400X1050:
-		switch (vmode_index) {
-		case VIA_RES_640X480:
-			reg_num = NUM_TOTAL_P880_LCD_RES_6X4_14X10;
-			lcd_patch_reg = P880_LCD_RES_6X4_14X10;
-			break;
-		case VIA_RES_800X600:
-			reg_num = NUM_TOTAL_P880_LCD_RES_8X6_14X10;
-			lcd_patch_reg = P880_LCD_RES_8X6_14X10;
-			break;
-		}
-		break;
-	case LCD_PANEL_ID6_1600X1200:
-		switch (vmode_index) {
-		case VIA_RES_640X400:
-		case VIA_RES_640X480:
-			reg_num = NUM_TOTAL_P880_LCD_RES_6X4_16X12;
-			lcd_patch_reg = P880_LCD_RES_6X4_16X12;
-			break;
-		case VIA_RES_720X480:
-		case VIA_RES_720X576:
-			reg_num = NUM_TOTAL_P880_LCD_RES_7X4_16X12;
-			lcd_patch_reg = P880_LCD_RES_7X4_16X12;
-			break;
-		case VIA_RES_800X600:
-			reg_num = NUM_TOTAL_P880_LCD_RES_8X6_16X12;
-			lcd_patch_reg = P880_LCD_RES_8X6_16X12;
-			break;
-		case VIA_RES_1024X768:
-			reg_num = NUM_TOTAL_P880_LCD_RES_10X7_16X12;
-			lcd_patch_reg = P880_LCD_RES_10X7_16X12;
-			break;
-		case VIA_RES_1280X768:
-		case VIA_RES_1280X960:
-		case VIA_RES_1280X1024:
-			reg_num = NUM_TOTAL_P880_LCD_RES_12X10_16X12;
-			lcd_patch_reg = P880_LCD_RES_12X10_16X12;
-			break;
-		}
-		break;
-
-	}
-	if (reg_num != 0) {
-		/* H.W. Reset : ON */
-		viafb_write_reg_mask(CR17, VIACR, 0x00, BIT7);
-
-		viafb_write_regx(lcd_patch_reg, reg_num);
-
-		/* H.W. Reset : OFF */
-		viafb_write_reg_mask(CR17, VIACR, 0x80, BIT7);
-
-		/* Reset PLL */
-		viafb_write_reg_mask(SR40, VIASR, 0x02, BIT1);
-		viafb_write_reg_mask(SR40, VIASR, 0x00, BIT1);
-
-		/* Fire! */
-		outb(inb(VIARMisc) | (BIT2 + BIT3), VIAWMisc);
-	}
-}
-
-static void load_lcd_patch_regs(int set_hres, int set_vres,
-	int panel_id, int set_iga)
-{
-	int vmode_index;
-
-	vmode_index = viafb_get_mode_index(set_hres, set_vres);
-
-	viafb_unlock_crt();
-
-	/* Patch for simultaneous & Expansion */
-	if ((set_iga == IGA1_IGA2) &&
-		(viaparinfo->lvds_setting_info->display_method ==
-	    LCD_EXPANDSION)) {
-		switch (viaparinfo->chip_info->gfx_chip_name) {
-		case UNICHROME_CLE266:
-		case UNICHROME_K400:
-			load_lcd_k400_patch_tbl(set_hres, set_vres, panel_id);
-			break;
-		case UNICHROME_K800:
-			break;
-		case UNICHROME_PM800:
-		case UNICHROME_CN700:
-		case UNICHROME_CX700:
-			load_lcd_p880_patch_tbl(set_hres, set_vres, panel_id);
-		}
-	}
-
-	viafb_lock_crt();
-}
-
 static void via_pitch_alignment_patch_lcd(
 	struct lvds_setting_information *plvds_setting_info,
 				   struct lvds_chip_information
@@ -949,29 +613,25 @@ void viafb_lcd_set_mode(struct crt_mode_table *mode_crt_table,
 		  struct lvds_setting_information *plvds_setting_info,
 		  struct lvds_chip_information *plvds_chip_info)
 {
-	int video_index = plvds_setting_info->lcd_panel_size;
 	int set_iga = plvds_setting_info->iga_path;
 	int mode_bpp = plvds_setting_info->bpp;
-	int set_hres, set_vres;
-	int panel_hres, panel_vres;
+	int set_hres = plvds_setting_info->h_active;
+	int set_vres = plvds_setting_info->v_active;
+	int panel_hres = plvds_setting_info->lcd_panel_hres;
+	int panel_vres = plvds_setting_info->lcd_panel_vres;
 	u32 pll_D_N;
-	int offset;
 	struct display_timing mode_crt_reg, panel_crt_reg;
 	struct crt_mode_table *panel_crt_table = NULL;
-	struct VideoModeTable *vmode_tbl = NULL;
+	struct VideoModeTable *vmode_tbl = viafb_get_mode(panel_hres,
+		panel_vres);
 
 	DEBUG_MSG(KERN_INFO "viafb_lcd_set_mode!!\n");
 	/* Get mode table */
 	mode_crt_reg = mode_crt_table->crtc;
 	/* Get panel table Pointer */
-	vmode_tbl = viafb_get_modetbl_pointer(video_index);
 	panel_crt_table = vmode_tbl->crtc;
 	panel_crt_reg = panel_crt_table->crtc;
 	DEBUG_MSG(KERN_INFO "bellow viafb_lcd_set_mode!!\n");
-	set_hres = plvds_setting_info->h_active;
-	set_vres = plvds_setting_info->v_active;
-	panel_hres = plvds_setting_info->lcd_panel_hres;
-	panel_vres = plvds_setting_info->lcd_panel_vres;
 	if (VT1636_LVDS == plvds_chip_info->lvds_chip_name)
 		viafb_init_lvds_vt1636(plvds_setting_info, plvds_chip_info);
 	plvds_setting_info->vclk = panel_crt_table->clk;
@@ -1001,54 +661,12 @@ void viafb_lcd_set_mode(struct crt_mode_table *mode_crt_table,
 		}
 	}
 
-	if (set_iga == IGA1_IGA2) {
-		load_crtc_shadow_timing(mode_crt_reg, panel_crt_reg);
-		/* Fill shadow registers */
-
-		switch (plvds_setting_info->lcd_panel_id) {
-		case LCD_PANEL_ID0_640X480:
-			offset = 80;
-			break;
-		case LCD_PANEL_ID1_800X600:
-		case LCD_PANEL_IDA_800X480:
-			offset = 110;
-			break;
-		case LCD_PANEL_ID2_1024X768:
-			offset = 150;
-			break;
-		case LCD_PANEL_ID3_1280X768:
-		case LCD_PANEL_ID4_1280X1024:
-		case LCD_PANEL_ID5_1400X1050:
-		case LCD_PANEL_ID9_1280X800:
-			offset = 190;
-			break;
-		case LCD_PANEL_ID6_1600X1200:
-			offset = 250;
-			break;
-		case LCD_PANEL_ID7_1366X768:
-		case LCD_PANEL_IDB_1360X768:
-			offset = 212;
-			break;
-		default:
-			offset = 140;
-			break;
-		}
-
-		/* Offset for simultaneous */
-		viafb_set_secondary_pitch(offset << 3);
-		DEBUG_MSG(KERN_INFO "viafb_load_reg!!\n");
-		viafb_load_fetch_count_reg(set_hres, 4, IGA2);
-		/* Fetch count for simultaneous */
-	} else {		/* SAMM */
-		/* Fetch count for IGA2 only */
-		viafb_load_fetch_count_reg(set_hres, mode_bpp / 8, set_iga);
-
-		if ((viaparinfo->chip_info->gfx_chip_name != UNICHROME_CLE266)
-		    && (viaparinfo->chip_info->gfx_chip_name != UNICHROME_K400))
-			viafb_load_FIFO_reg(set_iga, set_hres, set_vres);
+	/* Fetch count for IGA2 only */
+	viafb_load_fetch_count_reg(set_hres, mode_bpp / 8, set_iga);
 
-		viafb_set_color_depth(mode_bpp / 8, set_iga);
-	}
+	if ((viaparinfo->chip_info->gfx_chip_name != UNICHROME_CLE266)
+		&& (viaparinfo->chip_info->gfx_chip_name != UNICHROME_K400))
+		viafb_load_FIFO_reg(set_iga, set_hres, set_vres);
 
 	fill_lcd_format();
 
@@ -1065,11 +683,6 @@ void viafb_lcd_set_mode(struct crt_mode_table *mode_crt_table,
 	    || (UNICHROME_K8M890 == viaparinfo->chip_info->gfx_chip_name))
 		viafb_write_reg_mask(CR6A, VIACR, 0x01, BIT0);
 
-	load_lcd_patch_regs(set_hres, set_vres,
-			    plvds_setting_info->lcd_panel_id, set_iga);
-
-	DEBUG_MSG(KERN_INFO "load_lcd_patch_regs!!\n");
-
 	/* Patch for non 32bit alignment mode */
 	via_pitch_alignment_patch_lcd(plvds_setting_info, plvds_chip_info);
 }
@@ -1283,8 +896,7 @@ void viafb_lcd_enable(void)
 		viafb_write_reg_mask(CR6A, VIACR, 0x48, 0x48);
 	}
 
-	if ((viaparinfo->lvds_setting_info->iga_path == IGA1)
-	    || (viaparinfo->lvds_setting_info->iga_path == IGA1_IGA2)) {
+	if (viaparinfo->lvds_setting_info->iga_path == IGA1) {
 		/* CRT path set to IGA2    */
 		viafb_write_reg_mask(SR16, VIASR, 0x40, 0x40);
 		/* IGA2 path disabled      */
@@ -1476,210 +1088,6 @@ static struct display_timing lcd_centering_timging(struct display_timing
 	return crt_reg;
 }
 
-static void load_crtc_shadow_timing(struct display_timing mode_timing,
-			     struct display_timing panel_timing)
-{
-	struct io_register *reg = NULL;
-	int i;
-	int viafb_load_reg_Num = 0;
-	int reg_value = 0;
-
-	if (viaparinfo->lvds_setting_info->display_method == LCD_EXPANDSION) {
-		/* Expansion */
-		for (i = 12; i < 20; i++) {
-			switch (i) {
-			case H_TOTAL_SHADOW_INDEX:
-				reg_value =
-				    IGA2_HOR_TOTAL_SHADOW_FORMULA
-				    (panel_timing.hor_total);
-				viafb_load_reg_Num =
-				    iga2_shadow_crtc_reg.hor_total_shadow.
-				    reg_num;
-				reg = iga2_shadow_crtc_reg.hor_total_shadow.reg;
-				break;
-			case H_BLANK_END_SHADOW_INDEX:
-				reg_value =
-				    IGA2_HOR_BLANK_END_SHADOW_FORMULA
-				    (panel_timing.hor_blank_start,
-				     panel_timing.hor_blank_end);
-				viafb_load_reg_Num =
-				    iga2_shadow_crtc_reg.
-				    hor_blank_end_shadow.reg_num;
-				reg =
-				    iga2_shadow_crtc_reg.
-				    hor_blank_end_shadow.reg;
-				break;
-			case V_TOTAL_SHADOW_INDEX:
-				reg_value =
-				    IGA2_VER_TOTAL_SHADOW_FORMULA
-				    (panel_timing.ver_total);
-				viafb_load_reg_Num =
-				    iga2_shadow_crtc_reg.ver_total_shadow.
-				    reg_num;
-				reg = iga2_shadow_crtc_reg.ver_total_shadow.reg;
-				break;
-			case V_ADDR_SHADOW_INDEX:
-				reg_value =
-				    IGA2_VER_ADDR_SHADOW_FORMULA
-				    (panel_timing.ver_addr);
-				viafb_load_reg_Num =
-				    iga2_shadow_crtc_reg.ver_addr_shadow.
-				    reg_num;
-				reg = iga2_shadow_crtc_reg.ver_addr_shadow.reg;
-				break;
-			case V_BLANK_SATRT_SHADOW_INDEX:
-				reg_value =
-				    IGA2_VER_BLANK_START_SHADOW_FORMULA
-				    (panel_timing.ver_blank_start);
-				viafb_load_reg_Num =
-				    iga2_shadow_crtc_reg.
-				    ver_blank_start_shadow.reg_num;
-				reg =
-				    iga2_shadow_crtc_reg.
-				    ver_blank_start_shadow.reg;
-				break;
-			case V_BLANK_END_SHADOW_INDEX:
-				reg_value =
-				    IGA2_VER_BLANK_END_SHADOW_FORMULA
-				    (panel_timing.ver_blank_start,
-				     panel_timing.ver_blank_end);
-				viafb_load_reg_Num =
-				    iga2_shadow_crtc_reg.
-				    ver_blank_end_shadow.reg_num;
-				reg =
-				    iga2_shadow_crtc_reg.
-				    ver_blank_end_shadow.reg;
-				break;
-			case V_SYNC_SATRT_SHADOW_INDEX:
-				reg_value =
-				    IGA2_VER_SYNC_START_SHADOW_FORMULA
-				    (panel_timing.ver_sync_start);
-				viafb_load_reg_Num =
-				    iga2_shadow_crtc_reg.
-				    ver_sync_start_shadow.reg_num;
-				reg =
-				    iga2_shadow_crtc_reg.
-				    ver_sync_start_shadow.reg;
-				break;
-			case V_SYNC_END_SHADOW_INDEX:
-				reg_value =
-				    IGA2_VER_SYNC_END_SHADOW_FORMULA
-				    (panel_timing.ver_sync_start,
-				     panel_timing.ver_sync_end);
-				viafb_load_reg_Num =
-				    iga2_shadow_crtc_reg.
-				    ver_sync_end_shadow.reg_num;
-				reg =
-				    iga2_shadow_crtc_reg.
-				    ver_sync_end_shadow.reg;
-				break;
-			}
-			viafb_load_reg(reg_value,
-				viafb_load_reg_Num, reg, VIACR);
-		}
-	} else {		/* Centering */
-		for (i = 12; i < 20; i++) {
-			switch (i) {
-			case H_TOTAL_SHADOW_INDEX:
-				reg_value =
-				    IGA2_HOR_TOTAL_SHADOW_FORMULA
-				    (panel_timing.hor_total);
-				viafb_load_reg_Num =
-				    iga2_shadow_crtc_reg.hor_total_shadow.
-				    reg_num;
-				reg = iga2_shadow_crtc_reg.hor_total_shadow.reg;
-				break;
-			case H_BLANK_END_SHADOW_INDEX:
-				reg_value =
-				    IGA2_HOR_BLANK_END_SHADOW_FORMULA
-				    (panel_timing.hor_blank_start,
-				     panel_timing.hor_blank_end);
-				viafb_load_reg_Num =
-				    iga2_shadow_crtc_reg.
-				    hor_blank_end_shadow.reg_num;
-				reg =
-				    iga2_shadow_crtc_reg.
-				    hor_blank_end_shadow.reg;
-				break;
-			case V_TOTAL_SHADOW_INDEX:
-				reg_value =
-				    IGA2_VER_TOTAL_SHADOW_FORMULA
-				    (panel_timing.ver_total);
-				viafb_load_reg_Num =
-				    iga2_shadow_crtc_reg.ver_total_shadow.
-				    reg_num;
-				reg = iga2_shadow_crtc_reg.ver_total_shadow.reg;
-				break;
-			case V_ADDR_SHADOW_INDEX:
-				reg_value =
-				    IGA2_VER_ADDR_SHADOW_FORMULA
-				    (mode_timing.ver_addr);
-				viafb_load_reg_Num =
-				    iga2_shadow_crtc_reg.ver_addr_shadow.
-				    reg_num;
-				reg = iga2_shadow_crtc_reg.ver_addr_shadow.reg;
-				break;
-			case V_BLANK_SATRT_SHADOW_INDEX:
-				reg_value =
-				    IGA2_VER_BLANK_START_SHADOW_FORMULA
-				    (mode_timing.ver_blank_start);
-				viafb_load_reg_Num =
-				    iga2_shadow_crtc_reg.
-				    ver_blank_start_shadow.reg_num;
-				reg =
-				    iga2_shadow_crtc_reg.
-				    ver_blank_start_shadow.reg;
-				break;
-			case V_BLANK_END_SHADOW_INDEX:
-				reg_value =
-				    IGA2_VER_BLANK_END_SHADOW_FORMULA
-				    (panel_timing.ver_blank_start,
-				     panel_timing.ver_blank_end);
-				viafb_load_reg_Num =
-				    iga2_shadow_crtc_reg.
-				    ver_blank_end_shadow.reg_num;
-				reg =
-				    iga2_shadow_crtc_reg.
-				    ver_blank_end_shadow.reg;
-				break;
-			case V_SYNC_SATRT_SHADOW_INDEX:
-				reg_value =
-				    IGA2_VER_SYNC_START_SHADOW_FORMULA(
-				    (panel_timing.ver_sync_start -
-				    panel_timing.ver_blank_start) +
-				    (panel_timing.ver_addr -
-				    mode_timing.ver_addr) / 2 +
-				    mode_timing.ver_addr);
-				viafb_load_reg_Num =
-				    iga2_shadow_crtc_reg.ver_sync_start_shadow.
-				    reg_num;
-				reg =
-				    iga2_shadow_crtc_reg.ver_sync_start_shadow.
-				    reg;
-				break;
-			case V_SYNC_END_SHADOW_INDEX:
-				reg_value =
-				    IGA2_VER_SYNC_END_SHADOW_FORMULA(
-				    (panel_timing.ver_sync_start -
-				    panel_timing.ver_blank_start) +
-				    (panel_timing.ver_addr -
-				    mode_timing.ver_addr) / 2 +
-				    mode_timing.ver_addr,
-				    panel_timing.ver_sync_end);
-				viafb_load_reg_Num =
-				    iga2_shadow_crtc_reg.ver_sync_end_shadow.
-				    reg_num;
-				reg =
-				    iga2_shadow_crtc_reg.ver_sync_end_shadow.
-				    reg;
-				break;
-			}
-			viafb_load_reg(reg_value,
-				viafb_load_reg_Num, reg, VIACR);
-		}
-	}
-}
-
 bool viafb_lcd_get_mobile_state(bool *mobile)
 {
 	unsigned char *romptr, *tableptr;
diff --git a/drivers/video/via/share.h b/drivers/video/via/share.h
index 7cd03e2a1275..d55aaa7b912c 100644
--- a/drivers/video/via/share.h
+++ b/drivers/video/via/share.h
@@ -43,61 +43,6 @@
 /* Video Memory Size */
 #define VIDEO_MEMORY_SIZE_16M    0x1000000
 
-/* Definition Mode Index
-*/
-#define     VIA_RES_640X480                 	0
-#define     VIA_RES_800X600                 	1
-#define     VIA_RES_1024X768                	2
-#define     VIA_RES_1152X864                	3
-#define     VIA_RES_1280X1024               	4
-#define     VIA_RES_1600X1200               	5
-#define     VIA_RES_1440X1050               	6
-#define     VIA_RES_1280X768                	7
-#define     VIA_RES_1280X960                	8
-#define     VIA_RES_1920X1440               	9
-#define     VIA_RES_848X480                 	10
-#define     VIA_RES_1400X1050               	11
-#define     VIA_RES_720X480                 	12
-#define     VIA_RES_720X576                 	13
-#define     VIA_RES_1024X512                	14
-#define     VIA_RES_856X480                 	15
-#define     VIA_RES_1024X576                	16
-#define     VIA_RES_640X400                 	17
-#define     VIA_RES_1280X720                	18
-#define     VIA_RES_1920X1080               	19
-#define     VIA_RES_800X480                 	20
-#define     VIA_RES_1368X768                	21
-#define     VIA_RES_1024X600                	22
-#define     VIA_RES_1280X800                	23
-#define     VIA_RES_1680X1050               	24
-#define     VIA_RES_960X600			25
-#define     VIA_RES_1000X600               	26
-#define     VIA_RES_1088X612               	27
-#define     VIA_RES_1152X720               	28
-#define     VIA_RES_1200X720               	29
-#define     VIA_RES_1280X600               	30
-#define     VIA_RES_1360X768               	31
-#define     VIA_RES_1366X768               	32
-#define     VIA_RES_1440X900               	33
-#define     VIA_RES_1600X900               	34
-#define     VIA_RES_1600X1024              	35
-#define     VIA_RES_1792X1344              	36
-#define     VIA_RES_1856X1392              	37
-#define     VIA_RES_1920X1200              	38
-#define     VIA_RES_2048X1536              	39
-#define     VIA_RES_480X640                  	40
-
-/*Reduce Blanking*/
-#define     VIA_RES_1360X768_RB          	131
-#define     VIA_RES_1440X900_RB          	133
-#define     VIA_RES_1400X1050_RB        	111
-#define     VIA_RES_1600X900_RB          	134
-#define     VIA_RES_1680X1050_RB        	124
-#define     VIA_RES_1920X1080_RB        	119
-#define     VIA_RES_1920X1200_RB        	138
-
-#define     VIA_RES_INVALID                 	255
-
 /* standard VGA IO port
 */
 #define VIARMisc    0x3CC
@@ -118,7 +63,6 @@
 /* Display path */
 #define IGA1        1
 #define IGA2        2
-#define IGA1_IGA2   3
 
 /* Define Color Depth  */
 #define MODE_8BPP       1
diff --git a/drivers/video/via/via_utility.c b/drivers/video/via/via_utility.c
index d53c3d54ed8e..aefdeeec89b1 100644
--- a/drivers/video/via/via_utility.c
+++ b/drivers/video/via/via_utility.c
@@ -239,15 +239,3 @@ void viafb_get_gamma_support_state(int bpp, unsigned int *support_state)
 	else
 		*support_state = CRT_Device | DVI_Device | LCD_Device;
 }
-
-int viafb_input_parameter_converter(int parameter_value)
-{
-	int result;
-
-	if (parameter_value >= 1 && parameter_value <= 9)
-		result = 1 << (parameter_value - 1);
-	else
-		result = 1;
-
-	return result;
-}
diff --git a/drivers/video/via/via_utility.h b/drivers/video/via/via_utility.h
index 2fd455202ebd..1670ba82143f 100644
--- a/drivers/video/via/via_utility.h
+++ b/drivers/video/via/via_utility.h
@@ -30,6 +30,5 @@ bool viafb_lcd_get_support_expand_state(u32 xres, u32 yres);
 void viafb_set_gamma_table(int bpp, unsigned int *gamma_table);
 void viafb_get_gamma_table(unsigned int *gamma_table);
 void viafb_get_gamma_support_state(int bpp, unsigned int *support_state);
-int viafb_input_parameter_converter(int parameter_value);
 
 #endif /* __VIAUTILITY_H__ */
diff --git a/drivers/video/via/viafbdev.c b/drivers/video/via/viafbdev.c
index 3028e7ddc3b5..ce7783b63f6a 100644
--- a/drivers/video/via/viafbdev.c
+++ b/drivers/video/via/viafbdev.c
@@ -26,18 +26,22 @@
 
 #include "global.h"
 
-static struct fb_var_screeninfo default_var;
 static char *viafb_name = "Via";
 static u32 pseudo_pal[17];
 
 /* video mode */
-static char *viafb_mode = "640x480";
-static char *viafb_mode1 = "640x480";
+static char *viafb_mode;
+static char *viafb_mode1;
+static int viafb_bpp = 32;
+static int viafb_bpp1 = 32;
+
+static unsigned int viafb_second_offset;
+static int viafb_second_size;
 
 static int viafb_accel = 1;
 
 /* Added for specifying active devices.*/
-char *viafb_active_dev = "";
+char *viafb_active_dev;
 
 /*Added for specify lcd output port*/
 char *viafb_lcd_port = "";
@@ -50,18 +54,78 @@ static void apply_second_mode_setting(struct fb_var_screeninfo
 	*sec_var);
 static void retrieve_device_setting(struct viafb_ioctl_setting
 	*setting_info);
+static int viafb_pan_display(struct fb_var_screeninfo *var,
+	struct fb_info *info);
 
 static struct fb_ops viafb_ops;
 
 
+static void viafb_fill_var_color_info(struct fb_var_screeninfo *var, u8 depth)
+{
+	var->grayscale = 0;
+	var->red.msb_right = 0;
+	var->green.msb_right = 0;
+	var->blue.msb_right = 0;
+	var->transp.offset = 0;
+	var->transp.length = 0;
+	var->transp.msb_right = 0;
+	var->nonstd = 0;
+	switch (depth) {
+	case 8:
+		var->bits_per_pixel = 8;
+		var->red.offset = 0;
+		var->green.offset = 0;
+		var->blue.offset = 0;
+		var->red.length = 8;
+		var->green.length = 8;
+		var->blue.length = 8;
+		break;
+	case 15:
+		var->bits_per_pixel = 16;
+		var->red.offset = 10;
+		var->green.offset = 5;
+		var->blue.offset = 0;
+		var->red.length = 5;
+		var->green.length = 5;
+		var->blue.length = 5;
+		break;
+	case 16:
+		var->bits_per_pixel = 16;
+		var->red.offset = 11;
+		var->green.offset = 5;
+		var->blue.offset = 0;
+		var->red.length = 5;
+		var->green.length = 6;
+		var->blue.length = 5;
+		break;
+	case 24:
+		var->bits_per_pixel = 32;
+		var->red.offset = 16;
+		var->green.offset = 8;
+		var->blue.offset = 0;
+		var->red.length = 8;
+		var->green.length = 8;
+		var->blue.length = 8;
+		break;
+	case 30:
+		var->bits_per_pixel = 32;
+		var->red.offset = 20;
+		var->green.offset = 10;
+		var->blue.offset = 0;
+		var->red.length = 10;
+		var->green.length = 10;
+		var->blue.length = 10;
+		break;
+	}
+}
+
 static void viafb_update_fix(struct fb_info *info)
 {
 	u32 bpp = info->var.bits_per_pixel;
 
 	info->fix.visual =
 		bpp == 8 ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
-	info->fix.line_length =
-		((info->var.xres_virtual + 7) & ~7) * bpp / 8;
+	info->fix.line_length = (info->var.xres_virtual * bpp / 8 + 7) & ~7;
 }
 
 static void viafb_setup_fixinfo(struct fb_fix_screeninfo *fix,
@@ -75,6 +139,7 @@ static void viafb_setup_fixinfo(struct fb_fix_screeninfo *fix,
 
 	fix->type = FB_TYPE_PACKED_PIXELS;
 	fix->type_aux = 0;
+	fix->visual = FB_VISUAL_TRUECOLOR;
 
 	fix->xpanstep = fix->ywrapstep = 0;
 	fix->ypanstep = 1;
@@ -97,9 +162,10 @@ static int viafb_release(struct fb_info *info, int user)
 static int viafb_check_var(struct fb_var_screeninfo *var,
 	struct fb_info *info)
 {
-	int vmode_index, htotal, vtotal;
+	int htotal, vtotal, depth;
+	struct VideoModeTable *vmode_entry;
 	struct viafb_par *ppar = info->par;
-	u32 long_refresh;
+	u32 long_refresh, line;
 
 	DEBUG_MSG(KERN_INFO "viafb_check_var!\n");
 	/* Sanity check */
@@ -107,26 +173,36 @@ static int viafb_check_var(struct fb_var_screeninfo *var,
 	if (var->vmode & FB_VMODE_INTERLACED || var->vmode & FB_VMODE_DOUBLE)
 		return -EINVAL;
 
-	vmode_index = viafb_get_mode_index(var->xres, var->yres);
-	if (vmode_index == VIA_RES_INVALID) {
+	vmode_entry = viafb_get_mode(var->xres, var->yres);
+	if (!vmode_entry) {
 		DEBUG_MSG(KERN_INFO
 			  "viafb: Mode %dx%dx%d not supported!!\n",
 			  var->xres, var->yres, var->bits_per_pixel);
 		return -EINVAL;
 	}
 
-	if (24 == var->bits_per_pixel)
-		var->bits_per_pixel = 32;
+	depth = fb_get_color_depth(var, &info->fix);
+	if (!depth)
+		depth = var->bits_per_pixel;
 
-	if (var->bits_per_pixel != 8 && var->bits_per_pixel != 16 &&
-		var->bits_per_pixel != 32)
+	if (depth < 0 || depth > 32)
 		return -EINVAL;
+	else if (!depth)
+		depth = 24;
+	else if (depth == 15 && viafb_dual_fb && ppar->iga_path == IGA1)
+		depth = 15;
+	else if (depth == 30)
+		depth = 30;
+	else if (depth <= 8)
+		depth = 8;
+	else if (depth <= 16)
+		depth = 16;
+	else
+		depth = 24;
 
-	if ((var->xres_virtual * (var->bits_per_pixel >> 3)) & 0x1F)
-		/*32 pixel alignment */
-		var->xres_virtual = (var->xres_virtual + 31) & ~31;
-	if (var->xres_virtual * var->yres_virtual * var->bits_per_pixel / 8 >
-		ppar->memsize)
+	viafb_fill_var_color_info(var, depth);
+	line = (var->xres_virtual * var->bits_per_pixel / 8 + 7) & ~7;
+	if (line * var->yres_virtual > ppar->memsize)
 		return -EINVAL;
 
 	/* Based on var passed in to calculate the refresh,
@@ -142,7 +218,7 @@ static int viafb_check_var(struct fb_var_screeninfo *var,
 	viafb_refresh = viafb_get_refresh(var->xres, var->yres, long_refresh);
 
 	/* Adjust var according to our driver's own table */
-	viafb_fill_var_timing_info(var, viafb_refresh, vmode_index);
+	viafb_fill_var_timing_info(var, viafb_refresh, vmode_entry);
 	if (info->var.accel_flags & FB_ACCELF_TEXT &&
 		!ppar->shared->engine_mmio)
 		info->var.accel_flags = 0;
@@ -153,39 +229,45 @@ static int viafb_check_var(struct fb_var_screeninfo *var,
 static int viafb_set_par(struct fb_info *info)
 {
 	struct viafb_par *viapar = info->par;
-	int vmode_index;
-	int vmode_index1 = 0;
+	struct VideoModeTable *vmode_entry, *vmode_entry1 = NULL;
 	DEBUG_MSG(KERN_INFO "viafb_set_par!\n");
 
 	viapar->depth = fb_get_color_depth(&info->var, &info->fix);
-	viafb_update_device_setting(info->var.xres, info->var.yres,
-			      info->var.bits_per_pixel, viafb_refresh, 0);
+	viafb_update_device_setting(viafbinfo->var.xres, viafbinfo->var.yres,
+		viafbinfo->var.bits_per_pixel, viafb_refresh, 0);
 
-	vmode_index = viafb_get_mode_index(info->var.xres, info->var.yres);
-
-	if (viafb_SAMM_ON == 1) {
+	vmode_entry = viafb_get_mode(viafbinfo->var.xres, viafbinfo->var.yres);
+	if (viafb_dual_fb) {
+		vmode_entry1 = viafb_get_mode(viafbinfo1->var.xres,
+			viafbinfo1->var.yres);
+		viafb_update_device_setting(viafbinfo1->var.xres,
+			viafbinfo1->var.yres, viafbinfo1->var.bits_per_pixel,
+			viafb_refresh1, 1);
+	} else if (viafb_SAMM_ON == 1) {
 		DEBUG_MSG(KERN_INFO
 		"viafb_second_xres = %d, viafb_second_yres = %d, bpp = %d\n",
 			  viafb_second_xres, viafb_second_yres, viafb_bpp1);
-		vmode_index1 = viafb_get_mode_index(viafb_second_xres,
+		vmode_entry1 = viafb_get_mode(viafb_second_xres,
 			viafb_second_yres);
-		DEBUG_MSG(KERN_INFO "->viafb_SAMM_ON: index=%d\n",
-			vmode_index1);
 
 		viafb_update_device_setting(viafb_second_xres,
 			viafb_second_yres, viafb_bpp1, viafb_refresh1, 1);
 	}
 
-	if (vmode_index != VIA_RES_INVALID) {
+	if (vmode_entry) {
 		viafb_update_fix(info);
-		viafb_bpp = info->var.bits_per_pixel;
+		if (viafb_dual_fb && viapar->iga_path == IGA2)
+			viafb_bpp1 = info->var.bits_per_pixel;
+		else
+			viafb_bpp = info->var.bits_per_pixel;
+
 		if (info->var.accel_flags & FB_ACCELF_TEXT)
 			info->flags &= ~FBINFO_HWACCEL_DISABLED;
 		else
 			info->flags |= FBINFO_HWACCEL_DISABLED;
-		viafb_setmode(vmode_index, info->var.xres, info->var.yres,
-			info->var.bits_per_pixel, vmode_index1,
-			viafb_second_xres, viafb_second_yres, viafb_bpp1);
+		viafb_setmode(vmode_entry, info->var.bits_per_pixel,
+			vmode_entry1, viafb_bpp1);
+		viafb_pan_display(&info->var, info);
 	}
 
 	return 0;
@@ -195,234 +277,52 @@ static int viafb_set_par(struct fb_info *info)
 static int viafb_setcolreg(unsigned regno, unsigned red, unsigned green,
 unsigned blue, unsigned transp, struct fb_info *info)
 {
-	u8 sr1a, sr1b, cr67, cr6a, rev = 0, shift = 10;
-	unsigned cmap_entries = (info->var.bits_per_pixel == 8) ? 256 : 16;
-	DEBUG_MSG(KERN_INFO "viafb_setcolreg!\n");
-	if (regno >= cmap_entries)
-		return 1;
-	if (UNICHROME_CLE266 == viaparinfo->chip_info->gfx_chip_name) {
-		/*
-		 * Read PCI bus 0,dev 0,function 0,index 0xF6 to get chip rev.
-		 */
-		outl(0x80000000 | (0xf6 & ~3), (unsigned long)0xCF8);
-		rev = (inl((unsigned long)0xCFC) >> ((0xf6 & 3) * 8)) & 0xff;
-	}
-	switch (info->var.bits_per_pixel) {
-	case 8:
-		outb(0x1A, 0x3C4);
-		sr1a = inb(0x3C5);
-		outb(0x1B, 0x3C4);
-		sr1b = inb(0x3C5);
-		outb(0x67, 0x3D4);
-		cr67 = inb(0x3D5);
-		outb(0x6A, 0x3D4);
-		cr6a = inb(0x3D5);
-
-		/* Map the 3C6/7/8/9 to the IGA2 */
-		outb(0x1A, 0x3C4);
-		outb(sr1a | 0x01, 0x3C5);
-		/* Second Display Engine colck always on */
-		outb(0x1B, 0x3C4);
-		outb(sr1b | 0x80, 0x3C5);
-		/* Second Display Color Depth 8 */
-		outb(0x67, 0x3D4);
-		outb(cr67 & 0x3F, 0x3D5);
-		outb(0x6A, 0x3D4);
-		/* Second Display Channel Reset CR6A[6]) */
-		outb(cr6a & 0xBF, 0x3D5);
-		/* Second Display Channel Enable CR6A[7] */
-		outb(cr6a | 0x80, 0x3D5);
-		/* Second Display Channel stop reset) */
-		outb(cr6a | 0x40, 0x3D5);
-
-		/* Bit mask of palette */
-		outb(0xFF, 0x3c6);
-		/* Write one register of IGA2 */
-		outb(regno, 0x3C8);
-		if (UNICHROME_CLE266 == viaparinfo->chip_info->gfx_chip_name &&
-			rev >= 15) {
-			shift = 8;
-			viafb_write_reg_mask(CR6A, VIACR, BIT5, BIT5);
-			viafb_write_reg_mask(SR15, VIASR, BIT7, BIT7);
-		} else {
-			shift = 10;
-			viafb_write_reg_mask(CR6A, VIACR, 0, BIT5);
-			viafb_write_reg_mask(SR15, VIASR, 0, BIT7);
-		}
-		outb(red >> shift, 0x3C9);
-		outb(green >> shift, 0x3C9);
-		outb(blue >> shift, 0x3C9);
-
-		/* Map the 3C6/7/8/9 to the IGA1 */
-		outb(0x1A, 0x3C4);
-		outb(sr1a & 0xFE, 0x3C5);
-		/* Bit mask of palette */
-		outb(0xFF, 0x3c6);
-		/* Write one register of IGA1 */
-		outb(regno, 0x3C8);
-		outb(red >> shift, 0x3C9);
-		outb(green >> shift, 0x3C9);
-		outb(blue >> shift, 0x3C9);
-
-		outb(0x1A, 0x3C4);
-		outb(sr1a, 0x3C5);
-		outb(0x1B, 0x3C4);
-		outb(sr1b, 0x3C5);
-		outb(0x67, 0x3D4);
-		outb(cr67, 0x3D5);
-		outb(0x6A, 0x3D4);
-		outb(cr6a, 0x3D5);
-		break;
-	case 16:
-		((u32 *) info->pseudo_palette)[regno] = (red & 0xF800) |
-		    ((green & 0xFC00) >> 5) | ((blue & 0xF800) >> 11);
-		break;
-	case 32:
-		((u32 *) info->pseudo_palette)[regno] =
-		    ((transp & 0xFF00) << 16) |
-		    ((red & 0xFF00) << 8) |
-		    ((green & 0xFF00)) | ((blue & 0xFF00) >> 8);
-		break;
-	}
-
-	return 0;
+	struct viafb_par *viapar = info->par;
+	u32 r, g, b;
 
-}
+	if (info->fix.visual == FB_VISUAL_PSEUDOCOLOR) {
+		if (regno > 255)
+			return -EINVAL;
 
-/*CALLED BY: fb_set_cmap */
-/*           fb_set_var, pass 256 colors */
-/*CALLED BY: fb_set_cmap */
-/*           fbcon_set_palette, pass 16 colors */
-static int viafb_setcmap(struct fb_cmap *cmap, struct fb_info *info)
-{
-	u32 len = cmap->len;
-	u32 i;
-	u16 *pred = cmap->red;
-	u16 *pgreen = cmap->green;
-	u16 *pblue = cmap->blue;
-	u16 *ptransp = cmap->transp;
-	u8 sr1a, sr1b, cr67, cr6a, rev = 0, shift = 10;
-	if (len > 256)
-		return 1;
-	if (UNICHROME_CLE266 == viaparinfo->chip_info->gfx_chip_name) {
-		/*
-		 * Read PCI bus 0, dev 0, function 0, index 0xF6 to get chip
-		 * rev.
-		 */
-		outl(0x80000000 | (0xf6 & ~3), (unsigned long)0xCF8);
-		rev = (inl((unsigned long)0xCFC) >> ((0xf6 & 3) * 8)) & 0xff;
-	}
-	switch (info->var.bits_per_pixel) {
-	case 8:
-		outb(0x1A, 0x3C4);
-		sr1a = inb(0x3C5);
-		outb(0x1B, 0x3C4);
-		sr1b = inb(0x3C5);
-		outb(0x67, 0x3D4);
-		cr67 = inb(0x3D5);
-		outb(0x6A, 0x3D4);
-		cr6a = inb(0x3D5);
-		/* Map the 3C6/7/8/9 to the IGA2 */
-		outb(0x1A, 0x3C4);
-		outb(sr1a | 0x01, 0x3C5);
-		outb(0x1B, 0x3C4);
-		/* Second Display Engine colck always on */
-		outb(sr1b | 0x80, 0x3C5);
-		outb(0x67, 0x3D4);
-		/* Second Display Color Depth 8 */
-		outb(cr67 & 0x3F, 0x3D5);
-		outb(0x6A, 0x3D4);
-		/* Second Display Channel Reset CR6A[6]) */
-		outb(cr6a & 0xBF, 0x3D5);
-		/* Second Display Channel Enable CR6A[7] */
-		outb(cr6a | 0x80, 0x3D5);
-		/* Second Display Channel stop reset) */
-		outb(cr6a | 0xC0, 0x3D5);
-
-		/* Bit mask of palette */
-		outb(0xFF, 0x3c6);
-		outb(0x00, 0x3C8);
-		if (UNICHROME_CLE266 == viaparinfo->chip_info->gfx_chip_name &&
-			rev >= 15) {
-			shift = 8;
-			viafb_write_reg_mask(CR6A, VIACR, BIT5, BIT5);
-			viafb_write_reg_mask(SR15, VIASR, BIT7, BIT7);
-		} else {
-			shift = 10;
-			viafb_write_reg_mask(CR6A, VIACR, 0, BIT5);
-			viafb_write_reg_mask(SR15, VIASR, 0, BIT7);
-		}
-		for (i = 0; i < len; i++) {
-			outb((*(pred + i)) >> shift, 0x3C9);
-			outb((*(pgreen + i)) >> shift, 0x3C9);
-			outb((*(pblue + i)) >> shift, 0x3C9);
-		}
+		if (!viafb_dual_fb || viapar->iga_path == IGA1)
+			viafb_set_primary_color_register(regno, red >> 8,
+				green >> 8, blue >> 8);
 
-		outb(0x1A, 0x3C4);
-		/* Map the 3C6/7/8/9 to the IGA1 */
-		outb(sr1a & 0xFE, 0x3C5);
-		/* Bit mask of palette */
-		outb(0xFF, 0x3c6);
-		outb(0x00, 0x3C8);
-		for (i = 0; i < len; i++) {
-			outb((*(pred + i)) >> shift, 0x3C9);
-			outb((*(pgreen + i)) >> shift, 0x3C9);
-			outb((*(pblue + i)) >> shift, 0x3C9);
-		}
+		if (!viafb_dual_fb || viapar->iga_path == IGA2)
+			viafb_set_secondary_color_register(regno, red >> 8,
+				green >> 8, blue >> 8);
+	} else {
+		if (regno > 15)
+			return -EINVAL;
 
-		outb(0x1A, 0x3C4);
-		outb(sr1a, 0x3C5);
-		outb(0x1B, 0x3C4);
-		outb(sr1b, 0x3C5);
-		outb(0x67, 0x3D4);
-		outb(cr67, 0x3D5);
-		outb(0x6A, 0x3D4);
-		outb(cr6a, 0x3D5);
-		break;
-	case 16:
-		if (len > 17)
-			return 0;	/* Because static u32 pseudo_pal[17]; */
-		for (i = 0; i < len; i++)
-			((u32 *) info->pseudo_palette)[i] =
-			    (*(pred + i) & 0xF800) |
-			    ((*(pgreen + i) & 0xFC00) >> 5) |
-			    ((*(pblue + i) & 0xF800) >> 11);
-		break;
-	case 32:
-		if (len > 17)
-			return 0;
-		if (ptransp) {
-			for (i = 0; i < len; i++)
-				((u32 *) info->pseudo_palette)[i] =
-				    ((*(ptransp + i) & 0xFF00) << 16) |
-				    ((*(pred + i) & 0xFF00) << 8) |
-				    ((*(pgreen + i) & 0xFF00)) |
-				    ((*(pblue + i) & 0xFF00) >> 8);
-		} else {
-			for (i = 0; i < len; i++)
-				((u32 *) info->pseudo_palette)[i] =
-				    0x00000000 |
-				    ((*(pred + i) & 0xFF00) << 8) |
-				    ((*(pgreen + i) & 0xFF00)) |
-				    ((*(pblue + i) & 0xFF00) >> 8);
-		}
-		break;
+		r = (red >> (16 - info->var.red.length))
+			<< info->var.red.offset;
+		b = (blue >> (16 - info->var.blue.length))
+			<< info->var.blue.offset;
+		g = (green >> (16 - info->var.green.length))
+			<< info->var.green.offset;
+		((u32 *) info->pseudo_palette)[regno] = r | g | b;
 	}
+
 	return 0;
 }
 
 static int viafb_pan_display(struct fb_var_screeninfo *var,
 	struct fb_info *info)
 {
-	unsigned int offset;
-
-	DEBUG_MSG(KERN_INFO "viafb_pan_display!\n");
-
-	offset = (var->xoffset + (var->yoffset * var->xres_virtual)) *
-	    var->bits_per_pixel / 16;
+	struct viafb_par *viapar = info->par;
+	u32 vram_addr = (var->yoffset * var->xres_virtual + var->xoffset)
+		* (var->bits_per_pixel / 8) + viapar->vram_addr;
+
+	DEBUG_MSG(KERN_DEBUG "viafb_pan_display, address = %d\n", vram_addr);
+	if (!viafb_dual_fb) {
+		viafb_set_primary_address(vram_addr);
+		viafb_set_secondary_address(vram_addr);
+	} else if (viapar->iga_path == IGA1)
+		viafb_set_primary_address(vram_addr);
+	else
+		viafb_set_secondary_address(vram_addr);
 
-	DEBUG_MSG(KERN_INFO "\nviafb_pan_display,offset =%d ", offset);
-	viafb_set_primary_address(offset);
 	return 0;
 }
 
@@ -476,6 +376,7 @@ static int viafb_ioctl(struct fb_info *info, u_int cmd, u_long arg)
 	u32 gpu32;
 
 	DEBUG_MSG(KERN_INFO "viafb_ioctl: 0x%X !!\n", cmd);
+	printk(KERN_WARNING "viafb_ioctl: Please avoid this interface as it is unstable and might change or vanish at any time!\n");
 	memset(&u, 0, sizeof(u));
 
 	switch (cmd) {
@@ -1015,23 +916,6 @@ static int viafb_sync(struct fb_info *info)
 	return 0;
 }
 
-int viafb_get_mode_index(int hres, int vres)
-{
-	u32 i;
-	DEBUG_MSG(KERN_INFO "viafb_get_mode_index!\n");
-
-	for (i = 0; i < NUM_TOTAL_MODETABLE; i++)
-		if (CLE266Modes[i].mode_array &&
-			CLE266Modes[i].crtc[0].crtc.hor_addr == hres &&
-			CLE266Modes[i].crtc[0].crtc.ver_addr == vres)
-			break;
-
-	if (i == NUM_TOTAL_MODETABLE)
-		return VIA_RES_INVALID;
-
-	return CLE266Modes[i].ModeIndex;
-}
-
 static void check_available_device_to_enable(int device_id)
 {
 	int device_num = 0;
@@ -1330,7 +1214,7 @@ static void retrieve_device_setting(struct viafb_ioctl_setting
 	setting_info->lcd_attributes.lcd_mode = viafb_lcd_mode;
 }
 
-static void parse_active_dev(void)
+static int parse_active_dev(void)
 {
 	viafb_CRT_ON = STATE_OFF;
 	viafb_DVI_ON = STATE_OFF;
@@ -1341,60 +1225,63 @@ static void parse_active_dev(void)
 	   IGA path to devices in SAMM case. */
 	/*    Note: The previous of active_dev is primary device,
 	   and the following is secondary device. */
-	if (!strncmp(viafb_active_dev, "CRT+DVI", 7)) {
+	if (!viafb_active_dev) {
+		viafb_CRT_ON = STATE_ON;
+		viafb_SAMM_ON = STATE_OFF;
+	} else if (!strcmp(viafb_active_dev, "CRT+DVI")) {
 		/* CRT+DVI */
 		viafb_CRT_ON = STATE_ON;
 		viafb_DVI_ON = STATE_ON;
 		viafb_primary_dev = CRT_Device;
-	} else if (!strncmp(viafb_active_dev, "DVI+CRT", 7)) {
+	} else if (!strcmp(viafb_active_dev, "DVI+CRT")) {
 		/* DVI+CRT */
 		viafb_CRT_ON = STATE_ON;
 		viafb_DVI_ON = STATE_ON;
 		viafb_primary_dev = DVI_Device;
-	} else if (!strncmp(viafb_active_dev, "CRT+LCD", 7)) {
+	} else if (!strcmp(viafb_active_dev, "CRT+LCD")) {
 		/* CRT+LCD */
 		viafb_CRT_ON = STATE_ON;
 		viafb_LCD_ON = STATE_ON;
 		viafb_primary_dev = CRT_Device;
-	} else if (!strncmp(viafb_active_dev, "LCD+CRT", 7)) {
+	} else if (!strcmp(viafb_active_dev, "LCD+CRT")) {
 		/* LCD+CRT */
 		viafb_CRT_ON = STATE_ON;
 		viafb_LCD_ON = STATE_ON;
 		viafb_primary_dev = LCD_Device;
-	} else if (!strncmp(viafb_active_dev, "DVI+LCD", 7)) {
+	} else if (!strcmp(viafb_active_dev, "DVI+LCD")) {
 		/* DVI+LCD */
 		viafb_DVI_ON = STATE_ON;
 		viafb_LCD_ON = STATE_ON;
 		viafb_primary_dev = DVI_Device;
-	} else if (!strncmp(viafb_active_dev, "LCD+DVI", 7)) {
+	} else if (!strcmp(viafb_active_dev, "LCD+DVI")) {
 		/* LCD+DVI */
 		viafb_DVI_ON = STATE_ON;
 		viafb_LCD_ON = STATE_ON;
 		viafb_primary_dev = LCD_Device;
-	} else if (!strncmp(viafb_active_dev, "LCD+LCD2", 8)) {
+	} else if (!strcmp(viafb_active_dev, "LCD+LCD2")) {
 		viafb_LCD_ON = STATE_ON;
 		viafb_LCD2_ON = STATE_ON;
 		viafb_primary_dev = LCD_Device;
-	} else if (!strncmp(viafb_active_dev, "LCD2+LCD", 8)) {
+	} else if (!strcmp(viafb_active_dev, "LCD2+LCD")) {
 		viafb_LCD_ON = STATE_ON;
 		viafb_LCD2_ON = STATE_ON;
 		viafb_primary_dev = LCD2_Device;
-	} else if (!strncmp(viafb_active_dev, "CRT", 3)) {
+	} else if (!strcmp(viafb_active_dev, "CRT")) {
 		/* CRT only */
 		viafb_CRT_ON = STATE_ON;
 		viafb_SAMM_ON = STATE_OFF;
-	} else if (!strncmp(viafb_active_dev, "DVI", 3)) {
+	} else if (!strcmp(viafb_active_dev, "DVI")) {
 		/* DVI only */
 		viafb_DVI_ON = STATE_ON;
 		viafb_SAMM_ON = STATE_OFF;
-	} else if (!strncmp(viafb_active_dev, "LCD", 3)) {
+	} else if (!strcmp(viafb_active_dev, "LCD")) {
 		/* LCD only */
 		viafb_LCD_ON = STATE_ON;
 		viafb_SAMM_ON = STATE_OFF;
-	} else {
-		viafb_CRT_ON = STATE_ON;
-		viafb_SAMM_ON = STATE_OFF;
-	}
+	} else
+		return -EINVAL;
+
+	return 0;
 }
 
 static int parse_port(char *opt_str, int *output_interface)
@@ -1823,35 +1710,37 @@ static void viafb_remove_proc(struct proc_dir_entry *viafb_entry)
 	remove_proc_entry("viafb", NULL);
 }
 
-static void parse_mode(const char *str, u32 *xres, u32 *yres)
+static int parse_mode(const char *str, u32 *xres, u32 *yres)
 {
 	char *ptr;
 
+	if (!str) {
+		*xres = 640;
+		*yres = 480;
+		return 0;
+	}
+
 	*xres = simple_strtoul(str, &ptr, 10);
 	if (ptr[0] != 'x')
-		goto out_default;
+		return -EINVAL;
 
 	*yres = simple_strtoul(&ptr[1], &ptr, 10);
 	if (ptr[0])
-		goto out_default;
-
-	return;
+		return -EINVAL;
 
-out_default:
-	printk(KERN_WARNING "viafb received invalid mode string: %s\n", str);
-	*xres = 640;
-	*yres = 480;
+	return 0;
 }
 
 static int __devinit via_pci_probe(struct pci_dev *pdev,
 				   const struct pci_device_id *ent)
 {
 	u32 default_xres, default_yres;
-	int vmode_index;
+	struct VideoModeTable *vmode_entry;
+	struct fb_var_screeninfo default_var;
 	u32 viafb_par_length;
 
 	DEBUG_MSG(KERN_INFO "VIAFB PCI Probe!!\n");
-
+	memset(&default_var, 0, sizeof(default_var));
 	viafb_par_length = ALIGN(sizeof(struct viafb_par), BITS_PER_LONG/8);
 
 	/* Allocate fb_info and ***_par here, also including some other needed
@@ -1877,7 +1766,6 @@ static int __devinit via_pci_probe(struct pci_dev *pdev,
 
 	if (viafb_dual_fb)
 		viafb_SAMM_ON = 1;
-	parse_active_dev();
 	parse_lcd_port();
 	parse_dvi_port();
 
@@ -1926,9 +1814,7 @@ static int __devinit via_pci_probe(struct pci_dev *pdev,
 	}
 
 	parse_mode(viafb_mode, &default_xres, &default_yres);
-	vmode_index = viafb_get_mode_index(default_xres, default_yres);
-	DEBUG_MSG(KERN_INFO "0->index=%d\n", vmode_index);
-
+	vmode_entry = viafb_get_mode(default_xres, default_yres);
 	if (viafb_SAMM_ON == 1) {
 		parse_mode(viafb_mode1, &viafb_second_xres,
 			&viafb_second_yres);
@@ -1947,19 +1833,6 @@ static int __devinit via_pci_probe(struct pci_dev *pdev,
 			viafb_second_virtual_yres = viafb_second_yres;
 	}
 
-	switch (viafb_bpp) {
-	case 0 ... 8:
-		viafb_bpp = 8;
-		break;
-	case 9 ... 16:
-		viafb_bpp = 16;
-		break;
-	case 17 ... 32:
-		viafb_bpp = 32;
-		break;
-	default:
-		viafb_bpp = 8;
-	}
 	default_var.xres = default_xres;
 	default_var.yres = default_yres;
 	switch (default_xres) {
@@ -1972,8 +1845,6 @@ static int __devinit via_pci_probe(struct pci_dev *pdev,
 	}
 	default_var.yres_virtual = default_yres;
 	default_var.bits_per_pixel = viafb_bpp;
-	if (default_var.bits_per_pixel == 15)
-		default_var.bits_per_pixel = 16;
 	default_var.pixclock =
 	    viafb_get_pixclock(default_xres, default_yres, viafb_refresh);
 	default_var.left_margin = (default_xres >> 3) & 0xf8;
@@ -1982,6 +1853,8 @@ static int __devinit via_pci_probe(struct pci_dev *pdev,
 	default_var.lower_margin = 4;
 	default_var.hsync_len = default_var.left_margin;
 	default_var.vsync_len = 4;
+	viafb_setup_fixinfo(&viafbinfo->fix, viaparinfo);
+	viafbinfo->var = default_var;
 
 	if (viafb_dual_fb) {
 		viafbinfo1 = framebuffer_alloc(viafb_par_length, &pdev->dev);
@@ -2016,8 +1889,6 @@ static int __devinit via_pci_probe(struct pci_dev *pdev,
 		default_var.yres = viafb_second_yres;
 		default_var.xres_virtual = viafb_second_virtual_xres;
 		default_var.yres_virtual = viafb_second_virtual_yres;
-		if (viafb_bpp1 != viafb_bpp)
-			viafb_bpp1 = viafb_bpp;
 		default_var.bits_per_pixel = viafb_bpp1;
 		default_var.pixclock =
 		    viafb_get_pixclock(viafb_second_xres, viafb_second_yres,
@@ -2037,9 +1908,7 @@ static int __devinit via_pci_probe(struct pci_dev *pdev,
 			&viafbinfo1->fix);
 	}
 
-	viafb_setup_fixinfo(&viafbinfo->fix, viaparinfo);
-	viafb_check_var(&default_var, viafbinfo);
-	viafbinfo->var = default_var;
+	viafb_check_var(&viafbinfo->var, viafbinfo);
 	viafb_update_fix(viafbinfo);
 	viaparinfo->depth = fb_get_color_depth(&viafbinfo->var,
 		&viafbinfo->fix);
@@ -2197,12 +2066,20 @@ static struct pci_driver viafb_driver = {
 
 static int __init viafb_init(void)
 {
+	u32 dummy;
 #ifndef MODULE
 	char *option = NULL;
 	if (fb_get_options("viafb", &option))
 		return -ENODEV;
 	viafb_setup(option);
 #endif
+	if (parse_mode(viafb_mode, &dummy, &dummy)
+		|| parse_mode(viafb_mode1, &dummy, &dummy)
+		|| viafb_bpp < 0 || viafb_bpp > 32
+		|| viafb_bpp1 < 0 || viafb_bpp1 > 32
+		|| parse_active_dev())
+		return -EINVAL;
+
 	printk(KERN_INFO
        "VIA Graphics Intergration Chipset framebuffer %d.%d initializing\n",
 	       VERSION_MAJOR, VERSION_MINOR);
@@ -2230,15 +2107,12 @@ static struct fb_ops viafb_ops = {
 	.fb_cursor = viafb_cursor,
 	.fb_ioctl = viafb_ioctl,
 	.fb_sync = viafb_sync,
-	.fb_setcmap = viafb_setcmap,
 };
 
 module_init(viafb_init);
 module_exit(viafb_exit);
 
 #ifdef MODULE
-module_param(viafb_memsize, int, S_IRUSR);
-
 module_param(viafb_mode, charp, S_IRUSR);
 MODULE_PARM_DESC(viafb_mode, "Set resolution (default=640x480)");
 
diff --git a/drivers/video/via/viafbdev.h b/drivers/video/via/viafbdev.h
index 0c94d2441922..61b5953cd159 100644
--- a/drivers/video/via/viafbdev.h
+++ b/drivers/video/via/viafbdev.h
@@ -83,22 +83,16 @@ struct viafb_par {
 
 extern unsigned int viafb_second_virtual_yres;
 extern unsigned int viafb_second_virtual_xres;
-extern unsigned int viafb_second_offset;
-extern int viafb_second_size;
 extern int viafb_SAMM_ON;
 extern int viafb_dual_fb;
 extern int viafb_LCD2_ON;
 extern int viafb_LCD_ON;
 extern int viafb_DVI_ON;
 extern int viafb_hotplug;
-extern int viafb_memsize;
 
 extern int strict_strtoul(const char *cp, unsigned int base,
 	unsigned long *res);
 
-void viafb_fill_var_timing_info(struct fb_var_screeninfo *var, int refresh,
-			  int mode_index);
-int viafb_get_mode_index(int hres, int vres);
 u8 viafb_gpio_i2c_read_lvds(struct lvds_setting_information
 	*plvds_setting_info, struct lvds_chip_information
 	*plvds_chip_info, u8 index);
diff --git a/drivers/video/via/viamode.c b/drivers/video/via/viamode.c
index b74f8a67923c..af50e244016c 100644
--- a/drivers/video/via/viamode.c
+++ b/drivers/video/via/viamode.c
@@ -412,7 +412,7 @@ struct io_reg PM1024x768[] = { {VIASR, 0x16, 0xBF, 0x0C},
 };
 
 struct patch_table res_patch_table[] = {
-	{VIA_RES_1024X768, ARRAY_SIZE(PM1024x768), PM1024x768}
+	{ARRAY_SIZE(PM1024x768), PM1024x768}
 };
 
 /* struct VPITTable {
@@ -879,169 +879,151 @@ struct crt_mode_table CRTM2048x1536[] = {
 	 {2800, 2048, 2048, 752, 2200, 224, 1592, 1536, 1536, 56, 1539, 4} }
 };
 
-/* Video Mode Table */
-/* struct VideoModeTable {*/
-/*  int                               ModeIndex;*/
-/*  struct crt_mode_table             *crtc;*/
-/*  int                               mode_array;*/
-/* };*/
-struct VideoModeTable CLE266Modes[] = {
+struct VideoModeTable viafb_modes[] = {
 	/* Display : 480x640 (GTF) */
-	{VIA_RES_480X640, CRTM480x640, ARRAY_SIZE(CRTM480x640)},
+	{CRTM480x640, ARRAY_SIZE(CRTM480x640)},
 
 	/* Display : 640x480 */
-	{VIA_RES_640X480, CRTM640x480, ARRAY_SIZE(CRTM640x480)},
+	{CRTM640x480, ARRAY_SIZE(CRTM640x480)},
 
 	/* Display : 720x480 (GTF) */
-	{VIA_RES_720X480, CRTM720x480, ARRAY_SIZE(CRTM720x480)},
+	{CRTM720x480, ARRAY_SIZE(CRTM720x480)},
 
 	/* Display : 720x576 (GTF) */
-	{VIA_RES_720X576, CRTM720x576, ARRAY_SIZE(CRTM720x576)},
+	{CRTM720x576, ARRAY_SIZE(CRTM720x576)},
 
 	/* Display : 800x600 */
-	{VIA_RES_800X600, CRTM800x600, ARRAY_SIZE(CRTM800x600)},
+	{CRTM800x600, ARRAY_SIZE(CRTM800x600)},
 
 	/* Display : 800x480 (CVT) */
-	{VIA_RES_800X480, CRTM800x480, ARRAY_SIZE(CRTM800x480)},
+	{CRTM800x480, ARRAY_SIZE(CRTM800x480)},
 
 	/* Display : 848x480 (CVT) */
-	{VIA_RES_848X480, CRTM848x480, ARRAY_SIZE(CRTM848x480)},
+	{CRTM848x480, ARRAY_SIZE(CRTM848x480)},
 
 	/* Display : 852x480 (GTF) */
-	{VIA_RES_856X480, CRTM852x480, ARRAY_SIZE(CRTM852x480)},
+	{CRTM852x480, ARRAY_SIZE(CRTM852x480)},
 
 	/* Display : 1024x512 (GTF) */
-	{VIA_RES_1024X512, CRTM1024x512, ARRAY_SIZE(CRTM1024x512)},
+	{CRTM1024x512, ARRAY_SIZE(CRTM1024x512)},
 
 	/* Display : 1024x600 */
-	{VIA_RES_1024X600, CRTM1024x600, ARRAY_SIZE(CRTM1024x600)},
-
-	/* Display : 1024x576 (GTF) */
-	/*{ VIA_RES_1024X576, CRTM1024x576, ARRAY_SIZE(CRTM1024x576)}, */
+	{CRTM1024x600, ARRAY_SIZE(CRTM1024x600)},
 
 	/* Display : 1024x768 */
-	{VIA_RES_1024X768, CRTM1024x768, ARRAY_SIZE(CRTM1024x768)},
+	{CRTM1024x768, ARRAY_SIZE(CRTM1024x768)},
 
 	/* Display : 1152x864 */
-	{VIA_RES_1152X864, CRTM1152x864, ARRAY_SIZE(CRTM1152x864)},
+	{CRTM1152x864, ARRAY_SIZE(CRTM1152x864)},
 
 	/* Display : 1280x768 (GTF) */
-	{VIA_RES_1280X768, CRTM1280x768, ARRAY_SIZE(CRTM1280x768)},
+	{CRTM1280x768, ARRAY_SIZE(CRTM1280x768)},
 
 	/* Display : 960x600 (CVT) */
-	{VIA_RES_960X600, CRTM960x600, ARRAY_SIZE(CRTM960x600)},
+	{CRTM960x600, ARRAY_SIZE(CRTM960x600)},
 
 	/* Display : 1000x600 (GTF) */
-	{VIA_RES_1000X600, CRTM1000x600, ARRAY_SIZE(CRTM1000x600)},
+	{CRTM1000x600, ARRAY_SIZE(CRTM1000x600)},
 
 	/* Display : 1024x576 (GTF) */
-	{VIA_RES_1024X576, CRTM1024x576, ARRAY_SIZE(CRTM1024x576)},
+	{CRTM1024x576, ARRAY_SIZE(CRTM1024x576)},
 
 	/* Display : 1088x612 (GTF) */
-	{VIA_RES_1088X612, CRTM1088x612, ARRAY_SIZE(CRTM1088x612)},
+	{CRTM1088x612, ARRAY_SIZE(CRTM1088x612)},
 
 	/* Display : 1152x720 (CVT) */
-	{VIA_RES_1152X720, CRTM1152x720, ARRAY_SIZE(CRTM1152x720)},
+	{CRTM1152x720, ARRAY_SIZE(CRTM1152x720)},
 
 	/* Display : 1200x720 (GTF) */
-	{VIA_RES_1200X720, CRTM1200x720, ARRAY_SIZE(CRTM1200x720)},
+	{CRTM1200x720, ARRAY_SIZE(CRTM1200x720)},
 
 	/* Display : 1280x600 (GTF) */
-	{VIA_RES_1280X600, CRTM1280x600, ARRAY_SIZE(CRTM1280x600)},
+	{CRTM1280x600, ARRAY_SIZE(CRTM1280x600)},
 
 	/* Display : 1280x800 (CVT) */
-	{VIA_RES_1280X800, CRTM1280x800, ARRAY_SIZE(CRTM1280x800)},
-
-	/* Display : 1280x800 (GTF) */
-	/*{ M1280x800, CRTM1280x800, ARRAY_SIZE(CRTM1280x800)}, */
+	{CRTM1280x800, ARRAY_SIZE(CRTM1280x800)},
 
 	/* Display : 1280x960 */
-	{VIA_RES_1280X960, CRTM1280x960, ARRAY_SIZE(CRTM1280x960)},
+	{CRTM1280x960, ARRAY_SIZE(CRTM1280x960)},
 
 	/* Display : 1280x1024 */
-	{VIA_RES_1280X1024, CRTM1280x1024, ARRAY_SIZE(CRTM1280x1024)},
+	{CRTM1280x1024, ARRAY_SIZE(CRTM1280x1024)},
 
 	/* Display : 1360x768 (CVT) */
-	{VIA_RES_1360X768, CRTM1360x768, ARRAY_SIZE(CRTM1360x768)},
-
-	/* Display : 1360x768 (CVT Reduce Blanking) */
-	{VIA_RES_1360X768_RB, CRTM1360x768_RB,
-	 ARRAY_SIZE(CRTM1360x768_RB)},
+	{CRTM1360x768, ARRAY_SIZE(CRTM1360x768)},
 
 	/* Display : 1366x768 */
-	{VIA_RES_1366X768, CRTM1366x768, ARRAY_SIZE(CRTM1366x768)},
+	{CRTM1366x768, ARRAY_SIZE(CRTM1366x768)},
 
 	/* Display : 1368x768 (GTF) */
-	/*{ M1368x768,CRTM1368x768,ARRAY_SIZE(CRTM1368x768)}, */
-	/* Display : 1368x768 (GTF) */
-	{VIA_RES_1368X768, CRTM1368x768, ARRAY_SIZE(CRTM1368x768)},
+	{CRTM1368x768, ARRAY_SIZE(CRTM1368x768)},
 
 	/* Display : 1440x900 (CVT) */
-	{VIA_RES_1440X900, CRTM1440x900, ARRAY_SIZE(CRTM1440x900)},
-
-	/* Display : 1440x900 (CVT Reduce Blanking) */
-	{VIA_RES_1440X900_RB, CRTM1440x900_RB,
-	 ARRAY_SIZE(CRTM1440x900_RB)},
+	{CRTM1440x900, ARRAY_SIZE(CRTM1440x900)},
 
 	/* Display : 1440x1050 (GTF) */
-	{VIA_RES_1440X1050, CRTM1440x1050, ARRAY_SIZE(CRTM1440x1050)},
-
-	/* Display : 1400x1050 (CVT Reduce Blanking) */
-	{VIA_RES_1400X1050_RB, CRTM1400x1050_RB,
-	 ARRAY_SIZE(CRTM1400x1050_RB)},
+	{CRTM1440x1050, ARRAY_SIZE(CRTM1440x1050)},
 
 	/* Display : 1600x900 (CVT) */
-	{VIA_RES_1600X900, CRTM1600x900, ARRAY_SIZE(CRTM1600x900)},
-
-	/* Display : 1600x900 (CVT Reduce Blanking) */
-	{VIA_RES_1600X900_RB, CRTM1600x900_RB,
-	 ARRAY_SIZE(CRTM1600x900_RB)},
+	{CRTM1600x900, ARRAY_SIZE(CRTM1600x900)},
 
 	/* Display : 1600x1024 (GTF) */
-	{VIA_RES_1600X1024, CRTM1600x1024, ARRAY_SIZE(CRTM1600x1024)},
+	{CRTM1600x1024, ARRAY_SIZE(CRTM1600x1024)},
 
 	/* Display : 1600x1200 */
-	{VIA_RES_1600X1200, CRTM1600x1200, ARRAY_SIZE(CRTM1600x1200)},
+	{CRTM1600x1200, ARRAY_SIZE(CRTM1600x1200)},
 
 	/* Display : 1680x1050 (CVT) */
-	{VIA_RES_1680X1050, CRTM1680x1050, ARRAY_SIZE(CRTM1680x1050)},
-
-	/* Display : 1680x1050 (CVT Reduce Blanking) */
-	{VIA_RES_1680X1050_RB, CRTM1680x1050_RB,
-	 ARRAY_SIZE(CRTM1680x1050_RB)},
+	{CRTM1680x1050, ARRAY_SIZE(CRTM1680x1050)},
 
 	/* Display : 1792x1344 (DMT) */
-	{VIA_RES_1792X1344, CRTM1792x1344, ARRAY_SIZE(CRTM1792x1344)},
+	{CRTM1792x1344, ARRAY_SIZE(CRTM1792x1344)},
 
 	/* Display : 1856x1392 (DMT) */
-	{VIA_RES_1856X1392, CRTM1856x1392, ARRAY_SIZE(CRTM1856x1392)},
+	{CRTM1856x1392, ARRAY_SIZE(CRTM1856x1392)},
 
 	/* Display : 1920x1440 */
-	{VIA_RES_1920X1440, CRTM1920x1440, ARRAY_SIZE(CRTM1920x1440)},
+	{CRTM1920x1440, ARRAY_SIZE(CRTM1920x1440)},
 
 	/* Display : 2048x1536 */
-	{VIA_RES_2048X1536, CRTM2048x1536, ARRAY_SIZE(CRTM2048x1536)},
+	{CRTM2048x1536, ARRAY_SIZE(CRTM2048x1536)},
 
 	/* Display : 1280x720 */
-	{VIA_RES_1280X720, CRTM1280x720, ARRAY_SIZE(CRTM1280x720)},
+	{CRTM1280x720, ARRAY_SIZE(CRTM1280x720)},
 
 	/* Display : 1920x1080 (CVT) */
-	{VIA_RES_1920X1080, CRTM1920x1080, ARRAY_SIZE(CRTM1920x1080)},
-
-	/* Display : 1920x1080 (CVT Reduce Blanking) */
-	{VIA_RES_1920X1080_RB, CRTM1920x1080_RB,
-	 ARRAY_SIZE(CRTM1920x1080_RB)},
+	{CRTM1920x1080, ARRAY_SIZE(CRTM1920x1080)},
 
 	/* Display : 1920x1200 (CVT) */
-	{VIA_RES_1920X1200, CRTM1920x1200, ARRAY_SIZE(CRTM1920x1200)},
-
-	/* Display : 1920x1200 (CVT Reduce Blanking) */
-	{VIA_RES_1920X1200_RB, CRTM1920x1200_RB,
-	 ARRAY_SIZE(CRTM1920x1200_RB)},
+	{CRTM1920x1200, ARRAY_SIZE(CRTM1920x1200)},
 
 	/* Display : 1400x1050 (CVT) */
-	{VIA_RES_1400X1050, CRTM1400x1050, ARRAY_SIZE(CRTM1400x1050)}
+	{CRTM1400x1050, ARRAY_SIZE(CRTM1400x1050)}
 };
+
+struct VideoModeTable viafb_rb_modes[] = {
+	/* Display : 1360x768 (CVT Reduce Blanking) */
+	{CRTM1360x768_RB, ARRAY_SIZE(CRTM1360x768_RB)},
+
+	/* Display : 1440x900 (CVT Reduce Blanking) */
+	{CRTM1440x900_RB, ARRAY_SIZE(CRTM1440x900_RB)},
+
+	/* Display : 1400x1050 (CVT Reduce Blanking) */
+	{CRTM1400x1050_RB, ARRAY_SIZE(CRTM1400x1050_RB)},
+
+	/* Display : 1600x900 (CVT Reduce Blanking) */
+	{CRTM1600x900_RB, ARRAY_SIZE(CRTM1600x900_RB)},
+
+	/* Display : 1680x1050 (CVT Reduce Blanking) */
+	{CRTM1680x1050_RB, ARRAY_SIZE(CRTM1680x1050_RB)},
+
+	/* Display : 1920x1080 (CVT Reduce Blanking) */
+	{CRTM1920x1080_RB, ARRAY_SIZE(CRTM1920x1080_RB)},
+
+	/* Display : 1920x1200 (CVT Reduce Blanking) */
+	{CRTM1920x1200_RB, ARRAY_SIZE(CRTM1920x1200_RB)}
+};
+
 struct crt_mode_table CEAM1280x720[] = {
 	{REFRESH_60, CLK_74_270M, M1280X720_CEA_R60_HSP,
 	 M1280X720_CEA_R60_VSP,
@@ -1056,8 +1038,8 @@ struct crt_mode_table CEAM1920x1080[] = {
 };
 struct VideoModeTable CEA_HDMI_Modes[] = {
 	/* Display : 1280x720 */
-	{VIA_RES_1280X720, CEAM1280x720, ARRAY_SIZE(CEAM1280x720)},
-	{VIA_RES_1920X1080, CEAM1920x1080, ARRAY_SIZE(CEAM1920x1080)}
+	{CEAM1280x720, ARRAY_SIZE(CEAM1280x720)},
+	{CEAM1920x1080, ARRAY_SIZE(CEAM1920x1080)}
 };
 
 int NUM_TOTAL_RES_MAP_REFRESH = ARRAY_SIZE(res_map_refresh_tbl);
@@ -1069,4 +1051,28 @@ int NUM_TOTAL_CX700_ModeXregs = ARRAY_SIZE(CX700_ModeXregs);
 int NUM_TOTAL_VX855_ModeXregs = ARRAY_SIZE(VX855_ModeXregs);
 int NUM_TOTAL_CLE266_ModeXregs = ARRAY_SIZE(CLE266_ModeXregs);
 int NUM_TOTAL_PATCH_MODE = ARRAY_SIZE(res_patch_table);
-int NUM_TOTAL_MODETABLE = ARRAY_SIZE(CLE266Modes);
+
+
+struct VideoModeTable *viafb_get_mode(int hres, int vres)
+{
+	u32 i;
+	for (i = 0; i < ARRAY_SIZE(viafb_modes); i++)
+		if (viafb_modes[i].mode_array &&
+			viafb_modes[i].crtc[0].crtc.hor_addr == hres &&
+			viafb_modes[i].crtc[0].crtc.ver_addr == vres)
+			return &viafb_modes[i];
+
+	return NULL;
+}
+
+struct VideoModeTable *viafb_get_rb_mode(int hres, int vres)
+{
+	u32 i;
+	for (i = 0; i < ARRAY_SIZE(viafb_rb_modes); i++)
+		if (viafb_rb_modes[i].mode_array &&
+			viafb_rb_modes[i].crtc[0].crtc.hor_addr == hres &&
+			viafb_rb_modes[i].crtc[0].crtc.ver_addr == vres)
+			return &viafb_rb_modes[i];
+
+	return NULL;
+}
diff --git a/drivers/video/via/viamode.h b/drivers/video/via/viamode.h
index a9d6554fabdf..5b1ced86514b 100644
--- a/drivers/video/via/viamode.h
+++ b/drivers/video/via/viamode.h
@@ -32,13 +32,11 @@ struct VPITTable {
 };
 
 struct VideoModeTable {
-	int ModeIndex;
 	struct crt_mode_table *crtc;
 	int mode_array;
 };
 
 struct patch_table {
-	int mode_index;
 	int table_length;
 	struct io_reg *io_reg_table;
 };
@@ -59,13 +57,11 @@ extern int NUM_TOTAL_CX700_ModeXregs;
 extern int NUM_TOTAL_VX855_ModeXregs;
 extern int NUM_TOTAL_CLE266_ModeXregs;
 extern int NUM_TOTAL_PATCH_MODE;
-extern int NUM_TOTAL_MODETABLE;
 
 /********************/
 /* Mode Table       */
 /********************/
 
-extern struct VideoModeTable CLE266Modes[];
 extern struct crt_mode_table CEAM1280x720[];
 extern struct crt_mode_table CEAM1920x1080[];
 extern struct VideoModeTable CEA_HDMI_Modes[];
@@ -81,4 +77,8 @@ extern struct io_reg CLE266_ModeXregs[];
 extern struct io_reg PM1024x768[];
 extern struct patch_table res_patch_table[];
 extern struct VPITTable VPIT;
+
+struct VideoModeTable *viafb_get_mode(int hres, int vres);
+struct VideoModeTable *viafb_get_rb_mode(int hres, int vres);
+
 #endif /* __VIAMODE_H__ */
diff --git a/drivers/video/w100fb.c b/drivers/video/w100fb.c
index 2376f688ec8b..5d223959778a 100644
--- a/drivers/video/w100fb.c
+++ b/drivers/video/w100fb.c
@@ -628,7 +628,7 @@ static int w100fb_resume(struct platform_device *dev)
 #endif
 
 
-int __init w100fb_probe(struct platform_device *pdev)
+int __devinit w100fb_probe(struct platform_device *pdev)
 {
 	int err = -EIO;
 	struct w100fb_mach_info *inf;
diff --git a/drivers/w1/masters/ds2482.c b/drivers/w1/masters/ds2482.c
index 406caa6a71cb..e5f74416d4b7 100644
--- a/drivers/w1/masters/ds2482.c
+++ b/drivers/w1/masters/ds2482.c
@@ -214,7 +214,7 @@ static int ds2482_wait_1wire_idle(struct ds2482_data *pdev)
 			 (++retries < DS2482_WAIT_IDLE_TIMEOUT));
 	}
 
-	if (retries > DS2482_WAIT_IDLE_TIMEOUT)
+	if (retries >= DS2482_WAIT_IDLE_TIMEOUT)
 		printk(KERN_ERR "%s: timeout on channel %d\n",
 		       __func__, pdev->channel);
 
diff --git a/drivers/w1/masters/mxc_w1.c b/drivers/w1/masters/mxc_w1.c
index 65244c02551b..492670358cbf 100644
--- a/drivers/w1/masters/mxc_w1.c
+++ b/drivers/w1/masters/mxc_w1.c
@@ -102,7 +102,7 @@ static u8 mxc_w1_ds2_touch_bit(void *data, u8 bit)
 	return ((__raw_readb(ctrl_addr)) >> 3) & 0x1;
 }
 
-static int __init mxc_w1_probe(struct platform_device *pdev)
+static int __devinit mxc_w1_probe(struct platform_device *pdev)
 {
 	struct mxc_w1_device *mdev;
 	struct resource *res;
@@ -166,7 +166,7 @@ failed_clk:
 /*
  * disassociate the w1 device from the driver
  */
-static int mxc_w1_remove(struct platform_device *pdev)
+static int __devexit mxc_w1_remove(struct platform_device *pdev)
 {
 	struct mxc_w1_device *mdev = platform_get_drvdata(pdev);
 	struct resource *res;
diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c
index 0d92969404c3..22977d30f89e 100644
--- a/drivers/w1/masters/omap_hdq.c
+++ b/drivers/w1/masters/omap_hdq.c
@@ -72,7 +72,7 @@ struct hdq_data {
 	int			init_trans;
 };
 
-static int __init omap_hdq_probe(struct platform_device *pdev);
+static int __devinit omap_hdq_probe(struct platform_device *pdev);
 static int omap_hdq_remove(struct platform_device *pdev);
 
 static struct platform_driver omap_hdq_driver = {
@@ -558,7 +558,7 @@ static void omap_w1_write_byte(void *_hdq, u8 byte)
 	return;
 }
 
-static int __init omap_hdq_probe(struct platform_device *pdev)
+static int __devinit omap_hdq_probe(struct platform_device *pdev)
 {
 	struct hdq_data *hdq_data;
 	struct resource *res;
diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c
index acc7e3b7fe17..ad5897dc4495 100644
--- a/drivers/w1/w1.c
+++ b/drivers/w1/w1.c
@@ -986,7 +986,7 @@ int w1_process(void *data)
 	return 0;
 }
 
-static int w1_init(void)
+static int __init w1_init(void)
 {
 	int retval;
 
@@ -1034,7 +1034,7 @@ err_out_exit_init:
 	return retval;
 }
 
-static void w1_fini(void)
+static void __exit w1_fini(void)
 {
 	struct w1_master *dev;
 
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 3da3f48720a7..bdcdbd53da89 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -55,6 +55,11 @@ config SOFT_WATCHDOG
 	  To compile this driver as a module, choose M here: the
 	  module will be called softdog.
 
+config MAX63XX_WATCHDOG
+       tristate "Max63xx watchdog"
+       help
+         Support for memory mapped max63{69,70,71,72,73,74} watchdog timer.
+
 config WM831X_WATCHDOG
 	tristate "WM831x watchdog"
 	depends on MFD_WM831X
@@ -289,6 +294,17 @@ config ADX_WATCHDOG
 	  Say Y here if you want support for the watchdog timer on Avionic
 	  Design Xanthos boards.
 
+config TS72XX_WATCHDOG
+	tristate "TS-72XX SBC Watchdog"
+	depends on MACH_TS72XX
+	help
+	  Technologic Systems TS-7200, TS-7250 and TS-7260 boards have
+	  watchdog timer implemented in a external CPLD chip. Say Y here
+	  if you want to support for the watchdog timer on TS-72XX boards.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ts72xx_wdt.
+
 # AVR32 Architecture
 
 config AT32AP700X_WDT
@@ -845,10 +861,10 @@ config TXX9_WDT
 # POWERPC Architecture
 
 config GEF_WDT
-	tristate "GE Fanuc Watchdog Timer"
+	tristate "GE Watchdog Timer"
 	depends on GEF_SBC610 || GEF_SBC310 || GEF_PPC9A
 	---help---
-	  Watchdog timer found in a number of GE Fanuc single board computers.
+	  Watchdog timer found in a number of GE single board computers.
 
 config MPC5200_WDT
 	bool "MPC52xx Watchdog Timer"
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 475c61100069..5e3cb95bb0e9 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -46,6 +46,7 @@ obj-$(CONFIG_COH901327_WATCHDOG) += coh901327_wdt.o
 obj-$(CONFIG_STMP3XXX_WATCHDOG) += stmp3xxx_wdt.o
 obj-$(CONFIG_NUC900_WATCHDOG) += nuc900_wdt.o
 obj-$(CONFIG_ADX_WATCHDOG) += adx_wdt.o
+obj-$(CONFIG_TS72XX_WATCHDOG) += ts72xx_wdt.o
 
 # AVR32 Architecture
 obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
@@ -142,4 +143,5 @@ obj-$(CONFIG_WATCHDOG_CP1XXX)		+= cpwd.o
 # Architecture Independant
 obj-$(CONFIG_WM831X_WATCHDOG) += wm831x_wdt.o
 obj-$(CONFIG_WM8350_WATCHDOG) += wm8350_wdt.o
+obj-$(CONFIG_MAX63XX_WATCHDOG) += max63xx_wdt.o
 obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
diff --git a/drivers/watchdog/acquirewdt.c b/drivers/watchdog/acquirewdt.c
index 4d18c874d963..2ffce4d75443 100644
--- a/drivers/watchdog/acquirewdt.c
+++ b/drivers/watchdog/acquirewdt.c
@@ -150,7 +150,7 @@ static long acq_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	int options, retval = -EINVAL;
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options = WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
 		.firmware_version = 1,
 		.identity = WATCHDOG_NAME,
diff --git a/drivers/watchdog/advantechwdt.c b/drivers/watchdog/advantechwdt.c
index 824d076a5cd6..4d40965d2c9f 100644
--- a/drivers/watchdog/advantechwdt.c
+++ b/drivers/watchdog/advantechwdt.c
@@ -137,7 +137,7 @@ static long advwdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	int new_timeout;
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options = WDIOF_KEEPALIVEPING |
 			   WDIOF_SETTIMEOUT |
 			   WDIOF_MAGICCLOSE,
diff --git a/drivers/watchdog/adx_wdt.c b/drivers/watchdog/adx_wdt.c
index 9d7d155364f8..a5ca7a6ee133 100644
--- a/drivers/watchdog/adx_wdt.c
+++ b/drivers/watchdog/adx_wdt.c
@@ -37,7 +37,7 @@ struct adx_wdt {
 	spinlock_t lock;
 };
 
-static struct watchdog_info adx_wdt_info = {
+static const struct watchdog_info adx_wdt_info = {
 	.identity = "Avionic Design Xanthos Watchdog",
 	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
 };
diff --git a/drivers/watchdog/alim1535_wdt.c b/drivers/watchdog/alim1535_wdt.c
index 937a80fb61e1..1e9caea8ff8a 100644
--- a/drivers/watchdog/alim1535_wdt.c
+++ b/drivers/watchdog/alim1535_wdt.c
@@ -180,7 +180,7 @@ static long ali_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options =		WDIOF_KEEPALIVEPING |
 					WDIOF_SETTIMEOUT |
 					WDIOF_MAGICCLOSE,
diff --git a/drivers/watchdog/alim7101_wdt.c b/drivers/watchdog/alim7101_wdt.c
index f90afdb1b255..d8d4da9a483d 100644
--- a/drivers/watchdog/alim7101_wdt.c
+++ b/drivers/watchdog/alim7101_wdt.c
@@ -238,7 +238,7 @@ static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT
 							| WDIOF_MAGICCLOSE,
 		.firmware_version = 1,
diff --git a/drivers/watchdog/ar7_wdt.c b/drivers/watchdog/ar7_wdt.c
index 2bb95cd308c1..c764c52412e4 100644
--- a/drivers/watchdog/ar7_wdt.c
+++ b/drivers/watchdog/ar7_wdt.c
@@ -219,7 +219,7 @@ static ssize_t ar7_wdt_write(struct file *file, const char *data,
 static long ar7_wdt_ioctl(struct file *file,
 					unsigned int cmd, unsigned long arg)
 {
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.identity = LONGNAME,
 		.firmware_version = 1,
 		.options = (WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
diff --git a/drivers/watchdog/at32ap700x_wdt.c b/drivers/watchdog/at32ap700x_wdt.c
index 037847923dcb..6873376f986c 100644
--- a/drivers/watchdog/at32ap700x_wdt.c
+++ b/drivers/watchdog/at32ap700x_wdt.c
@@ -202,7 +202,7 @@ static int at32_wdt_get_status(void)
 	return status;
 }
 
-static struct watchdog_info at32_wdt_info = {
+static const struct watchdog_info at32_wdt_info = {
 	.identity	= "at32ap700x watchdog",
 	.options	= WDIOF_SETTIMEOUT |
 			  WDIOF_KEEPALIVEPING |
diff --git a/drivers/watchdog/at91rm9200_wdt.c b/drivers/watchdog/at91rm9200_wdt.c
index b185dafe1494..b3046dc4b56c 100644
--- a/drivers/watchdog/at91rm9200_wdt.c
+++ b/drivers/watchdog/at91rm9200_wdt.c
@@ -121,7 +121,7 @@ static int at91_wdt_settimeout(int new_time)
 	return 0;
 }
 
-static struct watchdog_info at91_wdt_info = {
+static const struct watchdog_info at91_wdt_info = {
 	.identity	= "at91 watchdog",
 	.options	= WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
 };
diff --git a/drivers/watchdog/bcm47xx_wdt.c b/drivers/watchdog/bcm47xx_wdt.c
index 751c003864ad..5f245522397b 100644
--- a/drivers/watchdog/bcm47xx_wdt.c
+++ b/drivers/watchdog/bcm47xx_wdt.c
@@ -149,7 +149,7 @@ static ssize_t bcm47xx_wdt_write(struct file *file, const char __user *data,
 	return len;
 }
 
-static struct watchdog_info bcm47xx_wdt_info = {
+static const struct watchdog_info bcm47xx_wdt_info = {
 	.identity 	= DRV_NAME,
 	.options 	= WDIOF_SETTIMEOUT |
 				WDIOF_KEEPALIVEPING |
diff --git a/drivers/watchdog/bfin_wdt.c b/drivers/watchdog/bfin_wdt.c
index 2159e668751c..9c7ccd1e9088 100644
--- a/drivers/watchdog/bfin_wdt.c
+++ b/drivers/watchdog/bfin_wdt.c
@@ -19,8 +19,6 @@
 #include <linux/miscdevice.h>
 #include <linux/watchdog.h>
 #include <linux/fs.h>
-#include <linux/notifier.h>
-#include <linux/reboot.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/uaccess.h>
@@ -74,7 +72,7 @@
 
 static unsigned int timeout = WATCHDOG_TIMEOUT;
 static int nowayout = WATCHDOG_NOWAYOUT;
-static struct watchdog_info bfin_wdt_info;
+static const struct watchdog_info bfin_wdt_info;
 static unsigned long open_check;
 static char expect_close;
 static DEFINE_SPINLOCK(bfin_wdt_spinlock);
@@ -309,26 +307,6 @@ static long bfin_wdt_ioctl(struct file *file,
 	}
 }
 
-/**
- *	bfin_wdt_notify_sys - Notifier Handler
- *	@this: notifier block
- *	@code: notifier event
- *	@unused: unused
- *
- *	Handles specific events, such as turning off the watchdog during a
- *	shutdown event.
- */
-static int bfin_wdt_notify_sys(struct notifier_block *this,
-					unsigned long code, void *unused)
-{
-	stampit();
-
-	if (code == SYS_DOWN || code == SYS_HALT)
-		bfin_wdt_stop();
-
-	return NOTIFY_DONE;
-}
-
 #ifdef CONFIG_PM
 static int state_before_suspend;
 
@@ -388,40 +366,28 @@ static struct miscdevice bfin_wdt_miscdev = {
 	.fops     = &bfin_wdt_fops,
 };
 
-static struct watchdog_info bfin_wdt_info = {
+static const struct watchdog_info bfin_wdt_info = {
 	.identity = "Blackfin Watchdog",
 	.options  = WDIOF_SETTIMEOUT |
 		    WDIOF_KEEPALIVEPING |
 		    WDIOF_MAGICCLOSE,
 };
 
-static struct notifier_block bfin_wdt_notifier = {
-	.notifier_call = bfin_wdt_notify_sys,
-};
-
 /**
  *	bfin_wdt_probe - Initialize module
  *
- *	Registers the misc device and notifier handler.  Actual device
+ *	Registers the misc device.  Actual device
  *	initialization is handled by bfin_wdt_open().
  */
 static int __devinit bfin_wdt_probe(struct platform_device *pdev)
 {
 	int ret;
 
-	ret = register_reboot_notifier(&bfin_wdt_notifier);
-	if (ret) {
-		pr_devinit(KERN_ERR PFX
-			"cannot register reboot notifier (err=%d)\n", ret);
-		return ret;
-	}
-
 	ret = misc_register(&bfin_wdt_miscdev);
 	if (ret) {
 		pr_devinit(KERN_ERR PFX
 			"cannot register miscdev on minor=%d (err=%d)\n",
 				WATCHDOG_MINOR, ret);
-		unregister_reboot_notifier(&bfin_wdt_notifier);
 		return ret;
 	}
 
@@ -434,21 +400,33 @@ static int __devinit bfin_wdt_probe(struct platform_device *pdev)
 /**
  *	bfin_wdt_remove - Initialize module
  *
- *	Unregisters the misc device and notifier handler.  Actual device
+ *	Unregisters the misc device.  Actual device
  *	deinitialization is handled by bfin_wdt_close().
  */
 static int __devexit bfin_wdt_remove(struct platform_device *pdev)
 {
 	misc_deregister(&bfin_wdt_miscdev);
-	unregister_reboot_notifier(&bfin_wdt_notifier);
 	return 0;
 }
 
+/**
+ *	bfin_wdt_shutdown - Soft Shutdown Handler
+ *
+ *	Handles the soft shutdown event.
+ */
+static void bfin_wdt_shutdown(struct platform_device *pdev)
+{
+	stampit();
+
+	bfin_wdt_stop();
+}
+
 static struct platform_device *bfin_wdt_device;
 
 static struct platform_driver bfin_wdt_driver = {
 	.probe     = bfin_wdt_probe,
 	.remove    = __devexit_p(bfin_wdt_remove),
+	.shutdown  = bfin_wdt_shutdown,
 	.suspend   = bfin_wdt_suspend,
 	.resume    = bfin_wdt_resume,
 	.driver    = {
diff --git a/drivers/watchdog/booke_wdt.c b/drivers/watchdog/booke_wdt.c
index e8380ef65c1c..8b724aad6825 100644
--- a/drivers/watchdog/booke_wdt.c
+++ b/drivers/watchdog/booke_wdt.c
@@ -121,7 +121,7 @@ static ssize_t booke_wdt_write(struct file *file, const char __user *buf,
 	return count;
 }
 
-static struct watchdog_info ident = {
+static const struct watchdog_info ident = {
 	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
 	.identity = "PowerPC Book-E Watchdog",
 };
diff --git a/drivers/watchdog/coh901327_wdt.c b/drivers/watchdog/coh901327_wdt.c
index 923cc68dba26..9291506b8b23 100644
--- a/drivers/watchdog/coh901327_wdt.c
+++ b/drivers/watchdog/coh901327_wdt.c
@@ -257,7 +257,7 @@ static long coh901327_ioctl(struct file *file, unsigned int cmd,
 		struct watchdog_info __user *ident;
 		int __user *i;
 	} uarg;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options		= WDIOF_CARDRESET |
 					  WDIOF_SETTIMEOUT |
 					  WDIOF_KEEPALIVEPING,
diff --git a/drivers/watchdog/cpu5wdt.c b/drivers/watchdog/cpu5wdt.c
index 71f6d7eec9a8..edd3475f41db 100644
--- a/drivers/watchdog/cpu5wdt.c
+++ b/drivers/watchdog/cpu5wdt.c
@@ -154,7 +154,7 @@ static long cpu5wdt_ioctl(struct file *file, unsigned int cmd,
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
 	unsigned int value;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options = WDIOF_CARDRESET,
 		.identity = "CPU5 WDT",
 	};
diff --git a/drivers/watchdog/cpwd.c b/drivers/watchdog/cpwd.c
index 081f2955419e..37ea052d4dee 100644
--- a/drivers/watchdog/cpwd.c
+++ b/drivers/watchdog/cpwd.c
@@ -403,7 +403,7 @@ static int cpwd_release(struct inode *inode, struct file *file)
 
 static long cpwd_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
-	static struct watchdog_info info = {
+	static const struct watchdog_info info = {
 		.options		= WDIOF_SETTIMEOUT,
 		.firmware_version	= 1,
 		.identity		= DRIVER_NAME,
diff --git a/drivers/watchdog/davinci_wdt.c b/drivers/watchdog/davinci_wdt.c
index 887136de1857..56162c87f5d8 100644
--- a/drivers/watchdog/davinci_wdt.c
+++ b/drivers/watchdog/davinci_wdt.c
@@ -142,7 +142,7 @@ davinci_wdt_write(struct file *file, const char *data, size_t len,
 	return len;
 }
 
-static struct watchdog_info ident = {
+static const struct watchdog_info ident = {
 	.options = WDIOF_KEEPALIVEPING,
 	.identity = "DaVinci Watchdog",
 };
diff --git a/drivers/watchdog/ep93xx_wdt.c b/drivers/watchdog/ep93xx_wdt.c
index cdd55e0d09f8..88ed54e50f74 100644
--- a/drivers/watchdog/ep93xx_wdt.c
+++ b/drivers/watchdog/ep93xx_wdt.c
@@ -131,7 +131,7 @@ ep93xx_wdt_write(struct file *file, const char __user *data, size_t len,
 	return len;
 }
 
-static struct watchdog_info ident = {
+static const struct watchdog_info ident = {
 	.options = WDIOF_CARDRESET | WDIOF_MAGICCLOSE,
 	.identity = "EP93xx Watchdog",
 };
diff --git a/drivers/watchdog/eurotechwdt.c b/drivers/watchdog/eurotechwdt.c
index 9add3541fb42..d1c4e55b1db0 100644
--- a/drivers/watchdog/eurotechwdt.c
+++ b/drivers/watchdog/eurotechwdt.c
@@ -238,7 +238,7 @@ static long eurwdt_ioctl(struct file *file,
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options	  = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT
 							| WDIOF_MAGICCLOSE,
 		.firmware_version = 1,
diff --git a/drivers/watchdog/gef_wdt.c b/drivers/watchdog/gef_wdt.c
index 734d9806a872..abdbad034a6c 100644
--- a/drivers/watchdog/gef_wdt.c
+++ b/drivers/watchdog/gef_wdt.c
@@ -1,9 +1,9 @@
 /*
- * GE Fanuc watchdog userspace interface
+ * GE watchdog userspace interface
  *
- * Author:  Martyn Welch <martyn.welch@gefanuc.com>
+ * Author:  Martyn Welch <martyn.welch@ge.com>
  *
- * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -161,11 +161,11 @@ static long gef_wdt_ioctl(struct file *file, unsigned int cmd,
 	int timeout;
 	int options;
 	void __user *argp = (void __user *)arg;
-	static struct watchdog_info info = {
+	static const struct watchdog_info info = {
 		.options =	WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE |
 				WDIOF_KEEPALIVEPING,
 		.firmware_version = 0,
-		.identity = "GE Fanuc watchdog",
+		.identity = "GE watchdog",
 	};
 
 	switch (cmd) {
@@ -311,7 +311,7 @@ static struct of_platform_driver gef_wdt_driver = {
 
 static int __init gef_wdt_init(void)
 {
-	printk(KERN_INFO "GE Fanuc watchdog driver\n");
+	printk(KERN_INFO "GE watchdog driver\n");
 	return of_register_platform_driver(&gef_wdt_driver);
 }
 
@@ -323,8 +323,8 @@ static void __exit gef_wdt_exit(void)
 module_init(gef_wdt_init);
 module_exit(gef_wdt_exit);
 
-MODULE_AUTHOR("Martyn Welch <martyn.welch@gefanuc.com>");
-MODULE_DESCRIPTION("GE Fanuc watchdog driver");
+MODULE_AUTHOR("Martyn Welch <martyn.welch@ge.com>");
+MODULE_DESCRIPTION("GE watchdog driver");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
 MODULE_ALIAS("platform: gef_wdt");
diff --git a/drivers/watchdog/geodewdt.c b/drivers/watchdog/geodewdt.c
index 38252ff828ca..9b49b125ad5a 100644
--- a/drivers/watchdog/geodewdt.c
+++ b/drivers/watchdog/geodewdt.c
@@ -142,7 +142,7 @@ static long geodewdt_ioctl(struct file *file, unsigned int cmd,
 	int __user *p = argp;
 	int interval;
 
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING
 		| WDIOF_MAGICCLOSE,
 		.firmware_version =     1,
diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c
index a6c5674c78e6..70c2c24660d0 100644
--- a/drivers/watchdog/hpwdt.c
+++ b/drivers/watchdog/hpwdt.c
@@ -554,7 +554,7 @@ static ssize_t hpwdt_write(struct file *file, const char __user *data,
 	return len;
 }
 
-static struct watchdog_info ident = {
+static const struct watchdog_info ident = {
 	.options = WDIOF_SETTIMEOUT |
 		   WDIOF_KEEPALIVEPING |
 		   WDIOF_MAGICCLOSE,
diff --git a/drivers/watchdog/i6300esb.c b/drivers/watchdog/i6300esb.c
index 7ba0b11ec525..bb9750a03942 100644
--- a/drivers/watchdog/i6300esb.c
+++ b/drivers/watchdog/i6300esb.c
@@ -34,7 +34,6 @@
 #include <linux/mm.h>
 #include <linux/miscdevice.h>
 #include <linux/watchdog.h>
-#include <linux/platform_device.h>
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/ioport.h>
@@ -42,7 +41,7 @@
 #include <linux/io.h>
 
 /* Module and version information */
-#define ESB_VERSION "0.04"
+#define ESB_VERSION "0.05"
 #define ESB_MODULE_NAME "i6300ESB timer"
 #define ESB_DRIVER_NAME ESB_MODULE_NAME ", v" ESB_VERSION
 #define PFX ESB_MODULE_NAME ": "
@@ -65,7 +64,7 @@
 /* Config register bits */
 #define ESB_WDT_REBOOT  (0x01 << 5)   /* Enable reboot on timeout          */
 #define ESB_WDT_FREQ    (0x01 << 2)   /* Decrement frequency               */
-#define ESB_WDT_INTTYPE (0x11 << 0)   /* Interrupt type on timer1 timeout  */
+#define ESB_WDT_INTTYPE (0x03 << 0)   /* Interrupt type on timer1 timeout  */
 
 /* Reload register bits */
 #define ESB_WDT_TIMEOUT (0x01 << 9)    /* Watchdog timed out                */
@@ -82,7 +81,9 @@ static unsigned long timer_alive;
 static struct pci_dev *esb_pci;
 static unsigned short triggered; /* The status of the watchdog upon boot */
 static char esb_expect_close;
-static struct platform_device *esb_platform_device;
+
+/* We can only use 1 card due to the /dev/watchdog restriction */
+static int cards_found;
 
 /* module parameters */
 /* 30 sec default heartbeat (1 < heartbeat < 2*1023) */
@@ -111,8 +112,8 @@ MODULE_PARM_DESC(nowayout,
  */
 static inline void esb_unlock_registers(void)
 {
-	writeb(ESB_UNLOCK1, ESB_RELOAD_REG);
-	writeb(ESB_UNLOCK2, ESB_RELOAD_REG);
+	writew(ESB_UNLOCK1, ESB_RELOAD_REG);
+	writew(ESB_UNLOCK2, ESB_RELOAD_REG);
 }
 
 static int esb_timer_start(void)
@@ -256,7 +257,7 @@ static long esb_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	int new_heartbeat;
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options =		WDIOF_SETTIMEOUT |
 					WDIOF_KEEPALIVEPING |
 					WDIOF_MAGICCLOSE,
@@ -332,11 +333,6 @@ static struct miscdevice esb_miscdev = {
 
 /*
  * Data for PCI driver interface
- *
- * This data only exists for exporting the supported
- * PCI ids via MODULE_DEVICE_TABLE.  We do not actually
- * register a pci_driver, because someone else might one day
- * want to register another driver on the same PCI id.
  */
 static struct pci_device_id esb_pci_tbl[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_9), },
@@ -348,29 +344,19 @@ MODULE_DEVICE_TABLE(pci, esb_pci_tbl);
  *      Init & exit routines
  */
 
-static unsigned char __devinit esb_getdevice(void)
+static unsigned char __devinit esb_getdevice(struct pci_dev *pdev)
 {
-	/*
-	 *      Find the PCI device
-	 */
-
-	esb_pci = pci_get_device(PCI_VENDOR_ID_INTEL,
-					PCI_DEVICE_ID_INTEL_ESB_9, NULL);
-
-	if (!esb_pci)
-		return 0;
-
-	if (pci_enable_device(esb_pci)) {
+	if (pci_enable_device(pdev)) {
 		printk(KERN_ERR PFX "failed to enable device\n");
 		goto err_devput;
 	}
 
-	if (pci_request_region(esb_pci, 0, ESB_MODULE_NAME)) {
+	if (pci_request_region(pdev, 0, ESB_MODULE_NAME)) {
 		printk(KERN_ERR PFX "failed to request region\n");
 		goto err_disable;
 	}
 
-	BASEADDR = pci_ioremap_bar(esb_pci, 0);
+	BASEADDR = pci_ioremap_bar(pdev, 0);
 	if (BASEADDR == NULL) {
 		/* Something's wrong here, BASEADDR has to be set */
 		printk(KERN_ERR PFX "failed to get BASEADDR\n");
@@ -378,14 +364,14 @@ static unsigned char __devinit esb_getdevice(void)
 	}
 
 	/* Done */
+	esb_pci = pdev;
 	return 1;
 
 err_release:
-	pci_release_region(esb_pci, 0);
+	pci_release_region(pdev, 0);
 err_disable:
-	pci_disable_device(esb_pci);
+	pci_disable_device(pdev);
 err_devput:
-	pci_dev_put(esb_pci);
 	return 0;
 }
 
@@ -430,12 +416,23 @@ static void __devinit esb_initdevice(void)
 	esb_timer_set_heartbeat(heartbeat);
 }
 
-static int __devinit esb_probe(struct platform_device *dev)
+static int __devinit esb_probe(struct pci_dev *pdev,
+		const struct pci_device_id *ent)
 {
 	int ret;
 
+	cards_found++;
+	if (cards_found == 1)
+		printk(KERN_INFO PFX "Intel 6300ESB WatchDog Timer Driver v%s\n",
+			ESB_VERSION);
+
+	if (cards_found > 1) {
+		printk(KERN_ERR PFX "This driver only supports 1 device\n");
+		return -ENODEV;
+	}
+
 	/* Check whether or not the hardware watchdog is there */
-	if (!esb_getdevice() || esb_pci == NULL)
+	if (!esb_getdevice(pdev) || esb_pci == NULL)
 		return -ENODEV;
 
 	/* Check that the heartbeat value is within it's range;
@@ -467,11 +464,11 @@ err_unmap:
 	iounmap(BASEADDR);
 	pci_release_region(esb_pci, 0);
 	pci_disable_device(esb_pci);
-	pci_dev_put(esb_pci);
+	esb_pci = NULL;
 	return ret;
 }
 
-static int __devexit esb_remove(struct platform_device *dev)
+static void __devexit esb_remove(struct pci_dev *pdev)
 {
 	/* Stop the timer before we leave */
 	if (!nowayout)
@@ -482,54 +479,30 @@ static int __devexit esb_remove(struct platform_device *dev)
 	iounmap(BASEADDR);
 	pci_release_region(esb_pci, 0);
 	pci_disable_device(esb_pci);
-	pci_dev_put(esb_pci);
-	return 0;
+	esb_pci = NULL;
 }
 
-static void esb_shutdown(struct platform_device *dev)
+static void esb_shutdown(struct pci_dev *pdev)
 {
 	esb_timer_stop();
 }
 
-static struct platform_driver esb_platform_driver = {
+static struct pci_driver esb_driver = {
+	.name		= ESB_MODULE_NAME,
+	.id_table	= esb_pci_tbl,
 	.probe          = esb_probe,
 	.remove         = __devexit_p(esb_remove),
 	.shutdown       = esb_shutdown,
-	.driver         = {
-		.owner  = THIS_MODULE,
-		.name   = ESB_MODULE_NAME,
-	},
 };
 
 static int __init watchdog_init(void)
 {
-	int err;
-
-	printk(KERN_INFO PFX "Intel 6300ESB WatchDog Timer Driver v%s\n",
-		ESB_VERSION);
-
-	err = platform_driver_register(&esb_platform_driver);
-	if (err)
-		return err;
-
-	esb_platform_device = platform_device_register_simple(ESB_MODULE_NAME,
-								-1, NULL, 0);
-	if (IS_ERR(esb_platform_device)) {
-		err = PTR_ERR(esb_platform_device);
-		goto unreg_platform_driver;
-	}
-
-	return 0;
-
-unreg_platform_driver:
-	platform_driver_unregister(&esb_platform_driver);
-	return err;
+	return pci_register_driver(&esb_driver);
 }
 
 static void __exit watchdog_cleanup(void)
 {
-	platform_device_unregister(esb_platform_device);
-	platform_driver_unregister(&esb_platform_driver);
+	pci_unregister_driver(&esb_driver);
 	printk(KERN_INFO PFX "Watchdog Module Unloaded.\n");
 }
 
diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
index 4bdb7f1a9077..44bc6aa46edf 100644
--- a/drivers/watchdog/iTCO_wdt.c
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -584,7 +584,7 @@ static long iTCO_wdt_ioctl(struct file *file, unsigned int cmd,
 	int new_heartbeat;
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options =		WDIOF_SETTIMEOUT |
 					WDIOF_KEEPALIVEPING |
 					WDIOF_MAGICCLOSE,
@@ -698,7 +698,7 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev,
 	if (iTCO_wdt_private.iTCO_version == 2) {
 		pci_read_config_dword(pdev, 0xf0, &base_address);
 		if ((base_address & 1) == 0) {
-			printk(KERN_ERR PFX "RCBA is disabled by harddware\n");
+			printk(KERN_ERR PFX "RCBA is disabled by hardware\n");
 			ret = -ENODEV;
 			goto out;
 		}
@@ -708,8 +708,8 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev,
 
 	/* Check chipset's NO_REBOOT bit */
 	if (iTCO_wdt_unset_NO_REBOOT_bit() && iTCO_vendor_check_noreboot_on()) {
-		printk(KERN_ERR PFX "failed to reset NO_REBOOT flag, "
-					"reboot disabled by hardware\n");
+		printk(KERN_INFO PFX "unable to reset NO_REBOOT flag, "
+					"platform may have disabled it\n");
 		ret = -ENODEV;	/* Cannot reset NO_REBOOT bit */
 		goto out_unmap;
 	}
@@ -805,6 +805,7 @@ static void __devexit iTCO_wdt_cleanup(void)
 
 static int __devinit iTCO_wdt_probe(struct platform_device *dev)
 {
+	int ret = -ENODEV;
 	int found = 0;
 	struct pci_dev *pdev = NULL;
 	const struct pci_device_id *ent;
@@ -814,19 +815,17 @@ static int __devinit iTCO_wdt_probe(struct platform_device *dev)
 	for_each_pci_dev(pdev) {
 		ent = pci_match_id(iTCO_wdt_pci_tbl, pdev);
 		if (ent) {
-			if (!(iTCO_wdt_init(pdev, ent, dev))) {
-				found++;
+			found++;
+			ret = iTCO_wdt_init(pdev, ent, dev);
+			if (!ret)
 				break;
-			}
 		}
 	}
 
-	if (!found) {
+	if (!found)
 		printk(KERN_INFO PFX "No card detected\n");
-		return -ENODEV;
-	}
 
-	return 0;
+	return ret;
 }
 
 static int __devexit iTCO_wdt_remove(struct platform_device *dev)
diff --git a/drivers/watchdog/ib700wdt.c b/drivers/watchdog/ib700wdt.c
index 4bef3ddff4a5..0149d8dfc81d 100644
--- a/drivers/watchdog/ib700wdt.c
+++ b/drivers/watchdog/ib700wdt.c
@@ -174,7 +174,7 @@ static long ibwdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
 
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT
 							| WDIOF_MAGICCLOSE,
 		.firmware_version = 1,
diff --git a/drivers/watchdog/indydog.c b/drivers/watchdog/indydog.c
index bea8a124a559..1cc5609666d1 100644
--- a/drivers/watchdog/indydog.c
+++ b/drivers/watchdog/indydog.c
@@ -111,7 +111,7 @@ static long indydog_ioctl(struct file *file, unsigned int cmd,
 							unsigned long arg)
 {
 	int options, retval = -EINVAL;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options		= WDIOF_KEEPALIVEPING,
 		.firmware_version	= 0,
 		.identity		= "Hardware Watchdog for SGI IP22",
diff --git a/drivers/watchdog/it8712f_wdt.c b/drivers/watchdog/it8712f_wdt.c
index daed48ded7fe..f52c162b1bea 100644
--- a/drivers/watchdog/it8712f_wdt.c
+++ b/drivers/watchdog/it8712f_wdt.c
@@ -236,7 +236,7 @@ static long it8712f_wdt_ioctl(struct file *file, unsigned int cmd,
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.identity = "IT8712F Watchdog",
 		.firmware_version = 1,
 		.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
diff --git a/drivers/watchdog/it87_wdt.c b/drivers/watchdog/it87_wdt.c
index cc133c531d08..b709b3b2d1ef 100644
--- a/drivers/watchdog/it87_wdt.c
+++ b/drivers/watchdog/it87_wdt.c
@@ -421,7 +421,7 @@ static ssize_t wdt_write(struct file *file, const char __user *buf,
 	return count;
 }
 
-static struct watchdog_info ident = {
+static const struct watchdog_info ident = {
 	.options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING,
 	.firmware_version =	1,
 	.identity = WATCHDOG_NAME,
diff --git a/drivers/watchdog/ixp2000_wdt.c b/drivers/watchdog/ixp2000_wdt.c
index 3c79dc587958..e86952a7168c 100644
--- a/drivers/watchdog/ixp2000_wdt.c
+++ b/drivers/watchdog/ixp2000_wdt.c
@@ -100,7 +100,7 @@ static ssize_t ixp2000_wdt_write(struct file *file, const char *data,
 }
 
 
-static struct watchdog_info ident = {
+static const struct watchdog_info ident = {
 	.options	= WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT |
 				WDIOF_KEEPALIVEPING,
 	.identity	= "IXP2000 Watchdog",
diff --git a/drivers/watchdog/ixp4xx_wdt.c b/drivers/watchdog/ixp4xx_wdt.c
index 147b4d5c63b3..e02c0ecda26b 100644
--- a/drivers/watchdog/ixp4xx_wdt.c
+++ b/drivers/watchdog/ixp4xx_wdt.c
@@ -89,7 +89,7 @@ ixp4xx_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos)
 	return len;
 }
 
-static struct watchdog_info ident = {
+static const struct watchdog_info ident = {
 	.options	= WDIOF_CARDRESET | WDIOF_MAGICCLOSE |
 			  WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
 	.identity	= "IXP4xx Watchdog",
diff --git a/drivers/watchdog/ks8695_wdt.c b/drivers/watchdog/ks8695_wdt.c
index e1c82769b08e..2852bb2e3fd9 100644
--- a/drivers/watchdog/ks8695_wdt.c
+++ b/drivers/watchdog/ks8695_wdt.c
@@ -145,7 +145,7 @@ static int ks8695_wdt_close(struct inode *inode, struct file *file)
 	return 0;
 }
 
-static struct watchdog_info ks8695_wdt_info = {
+static const struct watchdog_info ks8695_wdt_info = {
 	.identity	= "ks8695 watchdog",
 	.options	= WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
 };
diff --git a/drivers/watchdog/machzwd.c b/drivers/watchdog/machzwd.c
index 47d719717a3b..2d118cf022fc 100644
--- a/drivers/watchdog/machzwd.c
+++ b/drivers/watchdog/machzwd.c
@@ -101,7 +101,7 @@ MODULE_PARM_DESC(nowayout,
 
 #define PFX "machzwd"
 
-static struct watchdog_info zf_info = {
+static const struct watchdog_info zf_info = {
 	.options		= WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
 	.firmware_version	= 1,
 	.identity		= "ZF-Logic watchdog",
diff --git a/drivers/watchdog/max63xx_wdt.c b/drivers/watchdog/max63xx_wdt.c
new file mode 100644
index 000000000000..6eb91d757604
--- /dev/null
+++ b/drivers/watchdog/max63xx_wdt.c
@@ -0,0 +1,397 @@
+/*
+ * drivers/char/watchdog/max63xx_wdt.c
+ *
+ * Driver for max63{69,70,71,72,73,74} watchdog timers
+ *
+ * Copyright (C) 2009 Marc Zyngier <maz@misterjones.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This driver assumes the watchdog pins are memory mapped (as it is
+ * the case for the Arcom Zeus). Should it be connected over GPIOs or
+ * another interface, some abstraction will have to be introduced.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+#include <linux/device.h>
+
+#define DEFAULT_HEARTBEAT 60
+#define MAX_HEARTBEAT     60
+
+static int heartbeat = DEFAULT_HEARTBEAT;
+static int nowayout  = WATCHDOG_NOWAYOUT;
+
+/*
+ * Memory mapping: a single byte, 3 first lower bits to select bit 3
+ * to ping the watchdog.
+ */
+#define MAX6369_WDSET	(7 << 0)
+#define MAX6369_WDI   	(1 << 3)
+
+static DEFINE_SPINLOCK(io_lock);
+
+static unsigned long wdt_status;
+#define WDT_IN_USE	0
+#define WDT_RUNNING	1
+#define WDT_OK_TO_CLOSE 2
+
+static int nodelay;
+static struct resource	*wdt_mem;
+static void __iomem	*wdt_base;
+static struct platform_device *max63xx_pdev;
+
+/*
+ * The timeout values used are actually the absolute minimum the chip
+ * offers. Typical values on my board are slightly over twice as long
+ * (10s setting ends up with a 25s timeout), and can be up to 3 times
+ * the nominal setting (according to the datasheet). So please take
+ * these values with a grain of salt. Same goes for the initial delay
+ * "feature". Only max6373/74 have a few settings without this initial
+ * delay (selected with the "nodelay" parameter).
+ *
+ * I also decided to remove from the tables any timeout smaller than a
+ * second, as it looked completly overkill...
+ */
+
+/* Timeouts in second */
+struct max63xx_timeout {
+	u8 wdset;
+	u8 tdelay;
+	u8 twd;
+};
+
+static struct max63xx_timeout max6369_table[] = {
+	{ 5,  1,  1 },
+	{ 6, 10, 10 },
+	{ 7, 60, 60 },
+	{ },
+};
+
+static struct max63xx_timeout max6371_table[] = {
+	{ 6, 60,  3 },
+	{ 7, 60, 60 },
+	{ },
+};
+
+static struct max63xx_timeout max6373_table[] = {
+	{ 2, 60,  1 },
+	{ 5,  0,  1 },
+	{ 1,  3,  3 },
+	{ 7, 60, 10 },
+	{ 6,  0, 10 },
+	{ },
+};
+
+static struct max63xx_timeout *current_timeout;
+
+static struct max63xx_timeout *
+max63xx_select_timeout(struct max63xx_timeout *table, int value)
+{
+	while (table->twd) {
+		if (value <= table->twd) {
+			if (nodelay && table->tdelay == 0)
+				return table;
+
+			if (!nodelay)
+				return table;
+		}
+
+		table++;
+	}
+
+	return NULL;
+}
+
+static void max63xx_wdt_ping(void)
+{
+	u8 val;
+
+	spin_lock(&io_lock);
+
+	val = __raw_readb(wdt_base);
+
+	__raw_writeb(val | MAX6369_WDI, wdt_base);
+	__raw_writeb(val & ~MAX6369_WDI, wdt_base);
+
+	spin_unlock(&io_lock);
+}
+
+static void max63xx_wdt_enable(struct max63xx_timeout *entry)
+{
+	u8 val;
+
+	if (test_and_set_bit(WDT_RUNNING, &wdt_status))
+		return;
+
+	spin_lock(&io_lock);
+
+	val = __raw_readb(wdt_base);
+	val &= ~MAX6369_WDSET;
+	val |= entry->wdset;
+	__raw_writeb(val, wdt_base);
+
+	spin_unlock(&io_lock);
+
+	/* check for a edge triggered startup */
+	if (entry->tdelay == 0)
+		max63xx_wdt_ping();
+}
+
+static void max63xx_wdt_disable(void)
+{
+	spin_lock(&io_lock);
+
+	__raw_writeb(3, wdt_base);
+
+	spin_unlock(&io_lock);
+
+	clear_bit(WDT_RUNNING, &wdt_status);
+}
+
+static int max63xx_wdt_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(WDT_IN_USE, &wdt_status))
+		return -EBUSY;
+
+	max63xx_wdt_enable(current_timeout);
+	clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
+
+	return nonseekable_open(inode, file);
+}
+
+static ssize_t max63xx_wdt_write(struct file *file, const char *data,
+				 size_t len, loff_t *ppos)
+{
+	if (len) {
+		if (!nowayout) {
+			size_t i;
+
+			clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
+			for (i = 0; i != len; i++) {
+				char c;
+
+				if (get_user(c, data + i))
+					return -EFAULT;
+
+				if (c == 'V')
+					set_bit(WDT_OK_TO_CLOSE, &wdt_status);
+			}
+		}
+
+		max63xx_wdt_ping();
+	}
+
+	return len;
+}
+
+static const struct watchdog_info ident = {
+	.options = WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING,
+	.identity = "max63xx Watchdog",
+};
+
+static long max63xx_wdt_ioctl(struct file *file, unsigned int cmd,
+			      unsigned long arg)
+{
+	int ret = -ENOTTY;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		ret = copy_to_user((struct watchdog_info *)arg, &ident,
+				   sizeof(ident)) ? -EFAULT : 0;
+		break;
+
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		ret = put_user(0, (int *)arg);
+		break;
+
+	case WDIOC_KEEPALIVE:
+		max63xx_wdt_ping();
+		ret = 0;
+		break;
+
+	case WDIOC_GETTIMEOUT:
+		ret = put_user(heartbeat, (int *)arg);
+		break;
+	}
+	return ret;
+}
+
+static int max63xx_wdt_release(struct inode *inode, struct file *file)
+{
+	if (test_bit(WDT_OK_TO_CLOSE, &wdt_status))
+		max63xx_wdt_disable();
+	else
+		dev_crit(&max63xx_pdev->dev,
+			 "device closed unexpectedly - timer will not stop\n");
+
+	clear_bit(WDT_IN_USE, &wdt_status);
+	clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
+
+	return 0;
+}
+
+static const struct file_operations max63xx_wdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= max63xx_wdt_write,
+	.unlocked_ioctl	= max63xx_wdt_ioctl,
+	.open		= max63xx_wdt_open,
+	.release	= max63xx_wdt_release,
+};
+
+static struct miscdevice max63xx_wdt_miscdev = {
+	.minor	= WATCHDOG_MINOR,
+	.name	= "watchdog",
+	.fops	= &max63xx_wdt_fops,
+};
+
+static int __devinit max63xx_wdt_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+	int size;
+	struct resource *res;
+	struct device *dev = &pdev->dev;
+	struct max63xx_timeout *table;
+
+	table = (struct max63xx_timeout *)pdev->id_entry->driver_data;
+
+	if (heartbeat < 1 || heartbeat > MAX_HEARTBEAT)
+		heartbeat = DEFAULT_HEARTBEAT;
+
+	dev_info(dev, "requesting %ds heartbeat\n", heartbeat);
+	current_timeout = max63xx_select_timeout(table, heartbeat);
+
+	if (!current_timeout) {
+		dev_err(dev, "unable to satisfy heartbeat request\n");
+		return -EINVAL;
+	}
+
+	dev_info(dev, "using %ds heartbeat with %ds initial delay\n",
+		 current_timeout->twd, current_timeout->tdelay);
+
+	heartbeat = current_timeout->twd;
+
+	max63xx_pdev = pdev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(dev, "failed to get memory region resource\n");
+		return -ENOENT;
+	}
+
+	size = resource_size(res);
+	wdt_mem = request_mem_region(res->start, size, pdev->name);
+
+	if (wdt_mem == NULL) {
+		dev_err(dev, "failed to get memory region\n");
+		return -ENOENT;
+	}
+
+	wdt_base = ioremap(res->start, size);
+	if (!wdt_base) {
+		dev_err(dev, "failed to map memory region\n");
+		ret = -ENOMEM;
+		goto out_request;
+	}
+
+	ret = misc_register(&max63xx_wdt_miscdev);
+	if (ret < 0) {
+		dev_err(dev, "cannot register misc device\n");
+		goto out_unmap;
+	}
+
+	return 0;
+
+out_unmap:
+	iounmap(wdt_base);
+out_request:
+	release_resource(wdt_mem);
+	kfree(wdt_mem);
+
+	return ret;
+}
+
+static int __devexit max63xx_wdt_remove(struct platform_device *pdev)
+{
+	misc_deregister(&max63xx_wdt_miscdev);
+	if (wdt_mem) {
+		release_resource(wdt_mem);
+		kfree(wdt_mem);
+		wdt_mem = NULL;
+	}
+
+	if (wdt_base)
+		iounmap(wdt_base);
+
+	return 0;
+}
+
+static struct platform_device_id max63xx_id_table[] = {
+	{ "max6369_wdt", (kernel_ulong_t)max6369_table, },
+	{ "max6370_wdt", (kernel_ulong_t)max6369_table, },
+	{ "max6371_wdt", (kernel_ulong_t)max6371_table, },
+	{ "max6372_wdt", (kernel_ulong_t)max6371_table, },
+	{ "max6373_wdt", (kernel_ulong_t)max6373_table, },
+	{ "max6374_wdt", (kernel_ulong_t)max6373_table, },
+	{ },
+};
+MODULE_DEVICE_TABLE(platform, max63xx_id_table);
+
+static struct platform_driver max63xx_wdt_driver = {
+	.probe		= max63xx_wdt_probe,
+	.remove		= __devexit_p(max63xx_wdt_remove),
+	.id_table	= max63xx_id_table,
+	.driver		= {
+		.name	= "max63xx_wdt",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init max63xx_wdt_init(void)
+{
+	return platform_driver_register(&max63xx_wdt_driver);
+}
+
+static void __exit max63xx_wdt_exit(void)
+{
+	platform_driver_unregister(&max63xx_wdt_driver);
+}
+
+module_init(max63xx_wdt_init);
+module_exit(max63xx_wdt_exit);
+
+MODULE_AUTHOR("Marc Zyngier <maz@misterjones.org>");
+MODULE_DESCRIPTION("max63xx Watchdog Driver");
+
+module_param(heartbeat, int, 0);
+MODULE_PARM_DESC(heartbeat,
+		 "Watchdog heartbeat period in seconds from 1 to "
+		 __MODULE_STRING(MAX_HEARTBEAT) ", default "
+		 __MODULE_STRING(DEFAULT_HEARTBEAT));
+
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+		 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+module_param(nodelay, int, 0);
+MODULE_PARM_DESC(nodelay,
+		 "Force selection of a timeout setting without initial delay "
+		 "(max6373/74 only, default=0)");
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/drivers/watchdog/mixcomwd.c b/drivers/watchdog/mixcomwd.c
index 407b025cb104..bc820d16699a 100644
--- a/drivers/watchdog/mixcomwd.c
+++ b/drivers/watchdog/mixcomwd.c
@@ -201,7 +201,7 @@ static long mixcomwd_ioctl(struct file *file,
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
 	int status;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options = WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
 		.firmware_version = 1,
 		.identity = "MixCOM watchdog",
diff --git a/drivers/watchdog/mpc8xxx_wdt.c b/drivers/watchdog/mpc8xxx_wdt.c
index 38c588ee694f..4e3941c5e293 100644
--- a/drivers/watchdog/mpc8xxx_wdt.c
+++ b/drivers/watchdog/mpc8xxx_wdt.c
@@ -148,7 +148,7 @@ static long mpc8xxx_wdt_ioctl(struct file *file, unsigned int cmd,
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options = WDIOF_KEEPALIVEPING,
 		.firmware_version = 1,
 		.identity = "MPC8xxx",
diff --git a/drivers/watchdog/mpcore_wdt.c b/drivers/watchdog/mpcore_wdt.c
index a2dc07c2ed49..b0646dac924e 100644
--- a/drivers/watchdog/mpcore_wdt.c
+++ b/drivers/watchdog/mpcore_wdt.c
@@ -213,7 +213,7 @@ static ssize_t mpcore_wdt_write(struct file *file, const char *data,
 	return len;
 }
 
-static struct watchdog_info ident = {
+static const struct watchdog_info ident = {
 	.options		= WDIOF_SETTIMEOUT |
 				  WDIOF_KEEPALIVEPING |
 				  WDIOF_MAGICCLOSE,
diff --git a/drivers/watchdog/mv64x60_wdt.c b/drivers/watchdog/mv64x60_wdt.c
index a51dbe4c43da..97f8a48d8b78 100644
--- a/drivers/watchdog/mv64x60_wdt.c
+++ b/drivers/watchdog/mv64x60_wdt.c
@@ -179,7 +179,7 @@ static long mv64x60_wdt_ioctl(struct file *file,
 	int timeout;
 	int options;
 	void __user *argp = (void __user *)arg;
-	static struct watchdog_info info = {
+	static const struct watchdog_info info = {
 		.options =	WDIOF_SETTIMEOUT	|
 				WDIOF_MAGICCLOSE	|
 				WDIOF_KEEPALIVEPING,
diff --git a/drivers/watchdog/pc87413_wdt.c b/drivers/watchdog/pc87413_wdt.c
index 1a2b916e3f8d..d3aa2f1fe61d 100644
--- a/drivers/watchdog/pc87413_wdt.c
+++ b/drivers/watchdog/pc87413_wdt.c
@@ -407,7 +407,7 @@ static long pc87413_ioctl(struct file *file, unsigned int cmd,
 		int __user *i;
 	} uarg;
 
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options          = WDIOF_KEEPALIVEPING |
 				    WDIOF_SETTIMEOUT |
 				    WDIOF_MAGICCLOSE,
diff --git a/drivers/watchdog/pcwd.c b/drivers/watchdog/pcwd.c
index aa9512321f3a..06f7922606c0 100644
--- a/drivers/watchdog/pcwd.c
+++ b/drivers/watchdog/pcwd.c
@@ -606,7 +606,7 @@ static long pcwd_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	int temperature;
 	int new_heartbeat;
 	int __user *argp = (int __user *)arg;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options =		WDIOF_OVERHEAT |
 					WDIOF_CARDRESET |
 					WDIOF_KEEPALIVEPING |
diff --git a/drivers/watchdog/pcwd_pci.c b/drivers/watchdog/pcwd_pci.c
index 698f51bff1bc..64374d636f09 100644
--- a/drivers/watchdog/pcwd_pci.c
+++ b/drivers/watchdog/pcwd_pci.c
@@ -481,7 +481,7 @@ static long pcipcwd_ioctl(struct file *file, unsigned int cmd,
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options =		WDIOF_OVERHEAT |
 					WDIOF_CARDRESET |
 					WDIOF_KEEPALIVEPING |
diff --git a/drivers/watchdog/pcwd_usb.c b/drivers/watchdog/pcwd_usb.c
index 052fe451851f..8e4eacc5bb52 100644
--- a/drivers/watchdog/pcwd_usb.c
+++ b/drivers/watchdog/pcwd_usb.c
@@ -404,7 +404,7 @@ static long usb_pcwd_ioctl(struct file *file, unsigned int cmd,
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options =		WDIOF_KEEPALIVEPING |
 					WDIOF_SETTIMEOUT |
 					WDIOF_MAGICCLOSE,
diff --git a/drivers/watchdog/pika_wdt.c b/drivers/watchdog/pika_wdt.c
index 2d22e996e996..435ec2aed4fe 100644
--- a/drivers/watchdog/pika_wdt.c
+++ b/drivers/watchdog/pika_wdt.c
@@ -52,7 +52,7 @@ static struct {
 	struct timer_list timer;	/* The timer that pings the watchdog */
 } pikawdt_private;
 
-static struct watchdog_info ident = {
+static const struct watchdog_info ident = {
 	.identity	= DRV_NAME,
 	.options	= WDIOF_CARDRESET |
 			  WDIOF_SETTIMEOUT |
diff --git a/drivers/watchdog/pnx833x_wdt.c b/drivers/watchdog/pnx833x_wdt.c
index 538ec2c05197..09102f09e681 100644
--- a/drivers/watchdog/pnx833x_wdt.c
+++ b/drivers/watchdog/pnx833x_wdt.c
@@ -141,7 +141,7 @@ static long pnx833x_wdt_ioctl(struct file *file, unsigned int cmd,
 	int options, new_timeout = 0;
 	uint32_t timeout, timeout_left = 0;
 
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT,
 		.firmware_version = 0,
 		.identity = "Hardware Watchdog for PNX833x",
diff --git a/drivers/watchdog/rc32434_wdt.c b/drivers/watchdog/rc32434_wdt.c
index bf12d06b5877..d4c29b5311a4 100644
--- a/drivers/watchdog/rc32434_wdt.c
+++ b/drivers/watchdog/rc32434_wdt.c
@@ -198,7 +198,7 @@ static long rc32434_wdt_ioctl(struct file *file, unsigned int cmd,
 	void __user *argp = (void __user *)arg;
 	int new_timeout;
 	unsigned int value;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options =		WDIOF_SETTIMEOUT |
 					WDIOF_KEEPALIVEPING |
 					WDIOF_MAGICCLOSE,
diff --git a/drivers/watchdog/rdc321x_wdt.c b/drivers/watchdog/rdc321x_wdt.c
index 4976bfd1fce6..69c6adbd8205 100644
--- a/drivers/watchdog/rdc321x_wdt.c
+++ b/drivers/watchdog/rdc321x_wdt.c
@@ -149,7 +149,7 @@ static long rdc321x_wdt_ioctl(struct file *file, unsigned int cmd,
 {
 	void __user *argp = (void __user *)arg;
 	unsigned int value;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options = WDIOF_CARDRESET,
 		.identity = "RDC321x WDT",
 	};
diff --git a/drivers/watchdog/riowd.c b/drivers/watchdog/riowd.c
index c14ae8676903..ae57bf9e1b03 100644
--- a/drivers/watchdog/riowd.c
+++ b/drivers/watchdog/riowd.c
@@ -85,7 +85,7 @@ static int riowd_release(struct inode *inode, struct file *filp)
 
 static long riowd_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 {
-	static struct watchdog_info info = {
+	static const struct watchdog_info info = {
 		.options		= WDIOF_SETTIMEOUT,
 		.firmware_version	= 1,
 		.identity		= DRIVER_NAME,
diff --git a/drivers/watchdog/sbc_fitpc2_wdt.c b/drivers/watchdog/sbc_fitpc2_wdt.c
index e6763d2a567b..8d44c9b6fb5b 100644
--- a/drivers/watchdog/sbc_fitpc2_wdt.c
+++ b/drivers/watchdog/sbc_fitpc2_wdt.c
@@ -111,7 +111,7 @@ out:
 }
 
 
-static struct watchdog_info ident = {
+static const struct watchdog_info ident = {
 	.options	= WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT |
 				WDIOF_KEEPALIVEPING,
 	.identity	= WATCHDOG_NAME,
diff --git a/drivers/watchdog/sch311x_wdt.c b/drivers/watchdog/sch311x_wdt.c
index 569eb295a7a8..9c40f48804f5 100644
--- a/drivers/watchdog/sch311x_wdt.c
+++ b/drivers/watchdog/sch311x_wdt.c
@@ -250,7 +250,7 @@ static long sch311x_wdt_ioctl(struct file *file, unsigned int cmd,
 	int new_timeout;
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options		= WDIOF_KEEPALIVEPING |
 					  WDIOF_SETTIMEOUT |
 					  WDIOF_MAGICCLOSE,
diff --git a/drivers/watchdog/stmp3xxx_wdt.c b/drivers/watchdog/stmp3xxx_wdt.c
index 5dd952681f32..b3421fd2cda8 100644
--- a/drivers/watchdog/stmp3xxx_wdt.c
+++ b/drivers/watchdog/stmp3xxx_wdt.c
@@ -94,7 +94,7 @@ static ssize_t stmp3xxx_wdt_write(struct file *file, const char __user *data,
 	return len;
 }
 
-static struct watchdog_info ident = {
+static const struct watchdog_info ident = {
 	.options	= WDIOF_CARDRESET |
 			  WDIOF_MAGICCLOSE |
 			  WDIOF_SETTIMEOUT |
diff --git a/drivers/watchdog/ts72xx_wdt.c b/drivers/watchdog/ts72xx_wdt.c
new file mode 100644
index 000000000000..565a2c3321e5
--- /dev/null
+++ b/drivers/watchdog/ts72xx_wdt.c
@@ -0,0 +1,520 @@
+/*
+ * Watchdog driver for Technologic Systems TS-72xx based SBCs
+ * (TS-7200, TS-7250 and TS-7260). These boards have external
+ * glue logic CPLD chip, which includes programmable watchdog
+ * timer.
+ *
+ * Copyright (c) 2009 Mika Westerberg <mika.westerberg@iki.fi>
+ *
+ * This driver is based on ep93xx_wdt and wm831x_wdt drivers.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/fs.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/miscdevice.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+#include <linux/uaccess.h>
+
+#define TS72XX_WDT_FEED_VAL		0x05
+#define TS72XX_WDT_DEFAULT_TIMEOUT	8
+
+static int timeout = TS72XX_WDT_DEFAULT_TIMEOUT;
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. "
+			  "(1 <= timeout <= 8, default="
+			  __MODULE_STRING(TS72XX_WDT_DEFAULT_TIMEOUT)
+			  ")");
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close");
+
+/**
+ * struct ts72xx_wdt - watchdog control structure
+ * @lock: lock that protects this structure
+ * @regval: watchdog timeout value suitable for control register
+ * @flags: flags controlling watchdog device state
+ * @control_reg: watchdog control register
+ * @feed_reg: watchdog feed register
+ * @pdev: back pointer to platform dev
+ */
+struct ts72xx_wdt {
+	struct mutex	lock;
+	int		regval;
+
+#define TS72XX_WDT_BUSY_FLAG		1
+#define TS72XX_WDT_EXPECT_CLOSE_FLAG	2
+	int		flags;
+
+	void __iomem	*control_reg;
+	void __iomem	*feed_reg;
+
+	struct platform_device *pdev;
+};
+
+struct platform_device *ts72xx_wdt_pdev;
+
+/*
+ * TS-72xx Watchdog supports following timeouts (value written
+ * to control register):
+ *	value	description
+ *	-------------------------
+ * 	0x00	watchdog disabled
+ *	0x01	250ms
+ *	0x02	500ms
+ *	0x03	1s
+ *	0x04	reserved
+ *	0x05	2s
+ *	0x06	4s
+ *	0x07	8s
+ *
+ * Timeouts below 1s are not very usable so we don't
+ * allow them at all.
+ *
+ * We provide two functions that convert between these:
+ * timeout_to_regval() and regval_to_timeout().
+ */
+static const struct {
+	int	timeout;
+	int	regval;
+} ts72xx_wdt_map[] = {
+	{ 1, 3 },
+	{ 2, 5 },
+	{ 4, 6 },
+	{ 8, 7 },
+};
+
+/**
+ * timeout_to_regval() - converts given timeout to control register value
+ * @new_timeout: timeout in seconds to be converted
+ *
+ * Function converts given @new_timeout into valid value that can
+ * be programmed into watchdog control register. When conversion is
+ * not possible, function returns %-EINVAL.
+ */
+static int timeout_to_regval(int new_timeout)
+{
+	int i;
+
+	/* first limit it to 1 - 8 seconds */
+	new_timeout = clamp_val(new_timeout, 1, 8);
+
+	for (i = 0; i < ARRAY_SIZE(ts72xx_wdt_map); i++) {
+		if (ts72xx_wdt_map[i].timeout >= new_timeout)
+			return ts72xx_wdt_map[i].regval;
+	}
+
+	return -EINVAL;
+}
+
+/**
+ * regval_to_timeout() - converts control register value to timeout
+ * @regval: control register value to be converted
+ *
+ * Function converts given @regval to timeout in seconds (1, 2, 4 or 8).
+ * If @regval cannot be converted, function returns %-EINVAL.
+ */
+static int regval_to_timeout(int regval)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(ts72xx_wdt_map); i++) {
+		if (ts72xx_wdt_map[i].regval == regval)
+			return ts72xx_wdt_map[i].timeout;
+	}
+
+	return -EINVAL;
+}
+
+/**
+ * ts72xx_wdt_kick() - kick the watchdog
+ * @wdt: watchdog to be kicked
+ *
+ * Called with @wdt->lock held.
+ */
+static inline void ts72xx_wdt_kick(struct ts72xx_wdt *wdt)
+{
+	__raw_writeb(TS72XX_WDT_FEED_VAL, wdt->feed_reg);
+}
+
+/**
+ * ts72xx_wdt_start() - starts the watchdog timer
+ * @wdt: watchdog to be started
+ *
+ * This function programs timeout to watchdog timer
+ * and starts it.
+ *
+ * Called with @wdt->lock held.
+ */
+static void ts72xx_wdt_start(struct ts72xx_wdt *wdt)
+{
+	/*
+	 * To program the wdt, it first must be "fed" and
+	 * only after that (within 30 usecs) the configuration
+	 * can be changed.
+	 */
+	ts72xx_wdt_kick(wdt);
+	__raw_writeb((u8)wdt->regval, wdt->control_reg);
+}
+
+/**
+ * ts72xx_wdt_stop() - stops the watchdog timer
+ * @wdt: watchdog to be stopped
+ *
+ * Called with @wdt->lock held.
+ */
+static void ts72xx_wdt_stop(struct ts72xx_wdt *wdt)
+{
+	ts72xx_wdt_kick(wdt);
+	__raw_writeb(0, wdt->control_reg);
+}
+
+static int ts72xx_wdt_open(struct inode *inode, struct file *file)
+{
+	struct ts72xx_wdt *wdt = platform_get_drvdata(ts72xx_wdt_pdev);
+	int regval;
+
+	/*
+	 * Try to convert default timeout to valid register
+	 * value first.
+	 */
+	regval = timeout_to_regval(timeout);
+	if (regval < 0) {
+		dev_err(&wdt->pdev->dev,
+			"failed to convert timeout (%d) to register value\n",
+			timeout);
+		return -EINVAL;
+	}
+
+	if (mutex_lock_interruptible(&wdt->lock))
+		return -ERESTARTSYS;
+
+	if ((wdt->flags & TS72XX_WDT_BUSY_FLAG) != 0) {
+		mutex_unlock(&wdt->lock);
+		return -EBUSY;
+	}
+
+	wdt->flags = TS72XX_WDT_BUSY_FLAG;
+	wdt->regval = regval;
+	file->private_data = wdt;
+
+	ts72xx_wdt_start(wdt);
+
+	mutex_unlock(&wdt->lock);
+	return nonseekable_open(inode, file);
+}
+
+static int ts72xx_wdt_release(struct inode *inode, struct file *file)
+{
+	struct ts72xx_wdt *wdt = file->private_data;
+
+	if (mutex_lock_interruptible(&wdt->lock))
+		return -ERESTARTSYS;
+
+	if ((wdt->flags & TS72XX_WDT_EXPECT_CLOSE_FLAG) != 0) {
+		ts72xx_wdt_stop(wdt);
+	} else {
+		dev_warn(&wdt->pdev->dev,
+			 "TS-72XX WDT device closed unexpectly. "
+			 "Watchdog timer will not stop!\n");
+		/*
+		 * Kick it one more time, to give userland some time
+		 * to recover (for example, respawning the kicker
+		 * daemon).
+		 */
+		ts72xx_wdt_kick(wdt);
+	}
+
+	wdt->flags = 0;
+
+	mutex_unlock(&wdt->lock);
+	return 0;
+}
+
+static ssize_t ts72xx_wdt_write(struct file *file,
+				const char __user *data,
+				size_t len,
+				loff_t *ppos)
+{
+	struct ts72xx_wdt *wdt = file->private_data;
+
+	if (!len)
+		return 0;
+
+	if (mutex_lock_interruptible(&wdt->lock))
+		return -ERESTARTSYS;
+
+	ts72xx_wdt_kick(wdt);
+
+	/*
+	 * Support for magic character closing. User process
+	 * writes 'V' into the device, just before it is closed.
+	 * This means that we know that the wdt timer can be
+	 * stopped after user closes the device.
+	 */
+	if (!nowayout) {
+		int i;
+
+		for (i = 0; i < len; i++) {
+			char c;
+
+			/* In case it was set long ago */
+			wdt->flags &= ~TS72XX_WDT_EXPECT_CLOSE_FLAG;
+
+			if (get_user(c, data + i)) {
+				mutex_unlock(&wdt->lock);
+				return -EFAULT;
+			}
+			if (c == 'V') {
+				wdt->flags |= TS72XX_WDT_EXPECT_CLOSE_FLAG;
+				break;
+			}
+		}
+	}
+
+	mutex_unlock(&wdt->lock);
+	return len;
+}
+
+static const struct watchdog_info winfo = {
+	.options		= WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
+				  WDIOF_MAGICCLOSE,
+	.firmware_version	= 1,
+	.identity		= "TS-72XX WDT",
+};
+
+static long ts72xx_wdt_ioctl(struct file *file, unsigned int cmd,
+			     unsigned long arg)
+{
+	struct ts72xx_wdt *wdt = file->private_data;
+	void __user *argp = (void __user *)arg;
+	int __user *p = (int __user *)argp;
+	int error = 0;
+
+	if (mutex_lock_interruptible(&wdt->lock))
+		return -ERESTARTSYS;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		error = copy_to_user(argp, &winfo, sizeof(winfo));
+		break;
+
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+
+	case WDIOC_KEEPALIVE:
+		ts72xx_wdt_kick(wdt);
+		break;
+
+	case WDIOC_SETOPTIONS: {
+		int options;
+
+		if (get_user(options, p)) {
+			error = -EFAULT;
+			break;
+		}
+
+		error = -EINVAL;
+
+		if ((options & WDIOS_DISABLECARD) != 0) {
+			ts72xx_wdt_stop(wdt);
+			error = 0;
+		}
+		if ((options & WDIOS_ENABLECARD) != 0) {
+			ts72xx_wdt_start(wdt);
+			error = 0;
+		}
+
+		break;
+	}
+
+	case WDIOC_SETTIMEOUT: {
+		int new_timeout;
+
+		if (get_user(new_timeout, p)) {
+			error = -EFAULT;
+		} else {
+			int regval;
+
+			regval = timeout_to_regval(new_timeout);
+			if (regval < 0) {
+				error = -EINVAL;
+			} else {
+				ts72xx_wdt_stop(wdt);
+				wdt->regval = regval;
+				ts72xx_wdt_start(wdt);
+			}
+		}
+		if (error)
+			break;
+
+		/*FALLTHROUGH*/
+	}
+
+	case WDIOC_GETTIMEOUT:
+		if (put_user(regval_to_timeout(wdt->regval), p))
+			error = -EFAULT;
+		break;
+
+	default:
+		error = -ENOTTY;
+		break;
+	}
+
+	mutex_unlock(&wdt->lock);
+	return error;
+}
+
+static const struct file_operations ts72xx_wdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.open		= ts72xx_wdt_open,
+	.release	= ts72xx_wdt_release,
+	.write		= ts72xx_wdt_write,
+	.unlocked_ioctl	= ts72xx_wdt_ioctl,
+};
+
+static struct miscdevice ts72xx_wdt_miscdev = {
+	.minor		= WATCHDOG_MINOR,
+	.name		= "watchdog",
+	.fops		= &ts72xx_wdt_fops,
+};
+
+static __devinit int ts72xx_wdt_probe(struct platform_device *pdev)
+{
+	struct ts72xx_wdt *wdt;
+	struct resource *r1, *r2;
+	int error = 0;
+
+	wdt = kzalloc(sizeof(struct ts72xx_wdt), GFP_KERNEL);
+	if (!wdt) {
+		dev_err(&pdev->dev, "failed to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	r1 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!r1) {
+		dev_err(&pdev->dev, "failed to get memory resource\n");
+		error = -ENODEV;
+		goto fail;
+	}
+
+	r1 = request_mem_region(r1->start, resource_size(r1), pdev->name);
+	if (!r1) {
+		dev_err(&pdev->dev, "cannot request memory region\n");
+		error = -EBUSY;
+		goto fail;
+	}
+
+	wdt->control_reg = ioremap(r1->start, resource_size(r1));
+	if (!wdt->control_reg) {
+		dev_err(&pdev->dev, "failed to map memory\n");
+		error = -ENODEV;
+		goto fail_free_control;
+	}
+
+	r2 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!r2) {
+		dev_err(&pdev->dev, "failed to get memory resource\n");
+		error = -ENODEV;
+		goto fail_unmap_control;
+	}
+
+	r2 = request_mem_region(r2->start, resource_size(r2), pdev->name);
+	if (!r2) {
+		dev_err(&pdev->dev, "cannot request memory region\n");
+		error = -EBUSY;
+		goto fail_unmap_control;
+	}
+
+	wdt->feed_reg = ioremap(r2->start, resource_size(r2));
+	if (!wdt->feed_reg) {
+		dev_err(&pdev->dev, "failed to map memory\n");
+		error = -ENODEV;
+		goto fail_free_feed;
+	}
+
+	platform_set_drvdata(pdev, wdt);
+	ts72xx_wdt_pdev = pdev;
+	wdt->pdev = pdev;
+	mutex_init(&wdt->lock);
+
+	error = misc_register(&ts72xx_wdt_miscdev);
+	if (error) {
+		dev_err(&pdev->dev, "failed to register miscdev\n");
+		goto fail_unmap_feed;
+	}
+
+	dev_info(&pdev->dev, "TS-72xx Watchdog driver\n");
+
+	return 0;
+
+fail_unmap_feed:
+	platform_set_drvdata(pdev, NULL);
+	iounmap(wdt->feed_reg);
+fail_free_feed:
+	release_mem_region(r2->start, resource_size(r2));
+fail_unmap_control:
+	iounmap(wdt->control_reg);
+fail_free_control:
+	release_mem_region(r1->start, resource_size(r1));
+fail:
+	kfree(wdt);
+	return error;
+}
+
+static __devexit int ts72xx_wdt_remove(struct platform_device *pdev)
+{
+	struct ts72xx_wdt *wdt = platform_get_drvdata(pdev);
+	struct resource *res;
+	int error;
+
+	error = misc_deregister(&ts72xx_wdt_miscdev);
+	platform_set_drvdata(pdev, NULL);
+
+	iounmap(wdt->feed_reg);
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	release_mem_region(res->start, resource_size(res));
+
+	iounmap(wdt->control_reg);
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(res->start, resource_size(res));
+
+	kfree(wdt);
+	return error;
+}
+
+static struct platform_driver ts72xx_wdt_driver = {
+	.probe		= ts72xx_wdt_probe,
+	.remove		= __devexit_p(ts72xx_wdt_remove),
+	.driver		= {
+		.name	= "ts72xx-wdt",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static __init int ts72xx_wdt_init(void)
+{
+	return platform_driver_register(&ts72xx_wdt_driver);
+}
+module_init(ts72xx_wdt_init);
+
+static __exit void ts72xx_wdt_exit(void)
+{
+	platform_driver_unregister(&ts72xx_wdt_driver);
+}
+module_exit(ts72xx_wdt_exit);
+
+MODULE_AUTHOR("Mika Westerberg <mika.westerberg@iki.fi>");
+MODULE_DESCRIPTION("TS-72xx SBC Watchdog");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ts72xx-wdt");
diff --git a/drivers/watchdog/txx9wdt.c b/drivers/watchdog/txx9wdt.c
index d635566e9307..9e9ed7bfabcb 100644
--- a/drivers/watchdog/txx9wdt.c
+++ b/drivers/watchdog/txx9wdt.c
@@ -13,7 +13,6 @@
 #include <linux/miscdevice.h>
 #include <linux/watchdog.h>
 #include <linux/fs.h>
-#include <linux/reboot.h>
 #include <linux/init.h>
 #include <linux/uaccess.h>
 #include <linux/platform_device.h>
@@ -166,14 +165,6 @@ static long txx9wdt_ioctl(struct file *file, unsigned int cmd,
 	}
 }
 
-static int txx9wdt_notify_sys(struct notifier_block *this, unsigned long code,
-	void *unused)
-{
-	if (code == SYS_DOWN || code == SYS_HALT)
-		txx9wdt_stop();
-	return NOTIFY_DONE;
-}
-
 static const struct file_operations txx9wdt_fops = {
 	.owner		=	THIS_MODULE,
 	.llseek		=	no_llseek,
@@ -189,10 +180,6 @@ static struct miscdevice txx9wdt_miscdev = {
 	.fops	=	&txx9wdt_fops,
 };
 
-static struct notifier_block txx9wdt_notifier = {
-	.notifier_call = txx9wdt_notify_sys,
-};
-
 static int __init txx9wdt_probe(struct platform_device *dev)
 {
 	struct resource *res;
@@ -221,13 +208,8 @@ static int __init txx9wdt_probe(struct platform_device *dev)
 	if (!txx9wdt_reg)
 		goto exit_busy;
 
-	ret = register_reboot_notifier(&txx9wdt_notifier);
-	if (ret)
-		goto exit;
-
 	ret = misc_register(&txx9wdt_miscdev);
 	if (ret) {
-		unregister_reboot_notifier(&txx9wdt_notifier);
 		goto exit;
 	}
 
@@ -249,14 +231,19 @@ exit:
 static int __exit txx9wdt_remove(struct platform_device *dev)
 {
 	misc_deregister(&txx9wdt_miscdev);
-	unregister_reboot_notifier(&txx9wdt_notifier);
 	clk_disable(txx9_imclk);
 	clk_put(txx9_imclk);
 	return 0;
 }
 
+static void txx9wdt_shutdown(struct platform_device *dev)
+{
+	txx9wdt_stop();
+}
+
 static struct platform_driver txx9wdt_driver = {
 	.remove = __exit_p(txx9wdt_remove),
+	.shutdown = txx9wdt_shutdown,
 	.driver = {
 		.name = "txx9wdt",
 		.owner = THIS_MODULE,
diff --git a/drivers/watchdog/w83627hf_wdt.c b/drivers/watchdog/w83627hf_wdt.c
index f201accc4e3d..0f5288df0091 100644
--- a/drivers/watchdog/w83627hf_wdt.c
+++ b/drivers/watchdog/w83627hf_wdt.c
@@ -201,7 +201,7 @@ static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
 	int new_timeout;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
 							WDIOF_MAGICCLOSE,
 		.firmware_version = 1,
diff --git a/drivers/watchdog/w83977f_wdt.c b/drivers/watchdog/w83977f_wdt.c
index 0560182a1d09..6e6743d1066f 100644
--- a/drivers/watchdog/w83977f_wdt.c
+++ b/drivers/watchdog/w83977f_wdt.c
@@ -371,7 +371,7 @@ static ssize_t wdt_write(struct file *file, const char __user *buf,
  *      according to their available features.
  */
 
-static struct watchdog_info ident = {
+static const struct watchdog_info ident = {
 	.options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING,
 	.firmware_version =	1,
 	.identity = WATCHDOG_NAME,
diff --git a/drivers/watchdog/wdrtas.c b/drivers/watchdog/wdrtas.c
index 5bfb1f2c5319..94ec22b9e66b 100644
--- a/drivers/watchdog/wdrtas.c
+++ b/drivers/watchdog/wdrtas.c
@@ -312,7 +312,7 @@ static long wdrtas_ioctl(struct file *file, unsigned int cmd,
 {
 	int __user *argp = (void __user *)arg;
 	int i;
-	static struct watchdog_info wdinfo = {
+	static const struct watchdog_info wdinfo = {
 		.options = WDRTAS_SUPPORTED_MASK,
 		.firmware_version = 0,
 		.identity = "wdrtas",
diff --git a/drivers/watchdog/wdt.c b/drivers/watchdog/wdt.c
index 3bbefe9a2634..bfda2e99dd89 100644
--- a/drivers/watchdog/wdt.c
+++ b/drivers/watchdog/wdt.c
@@ -358,7 +358,7 @@ static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	int new_heartbeat;
 	int status;
 
-	static struct watchdog_info ident = {
+	struct watchdog_info ident = {
 		.options =		WDIOF_SETTIMEOUT|
 					WDIOF_MAGICCLOSE|
 					WDIOF_KEEPALIVEPING,
diff --git a/drivers/watchdog/wdt_pci.c b/drivers/watchdog/wdt_pci.c
index f368dd87083a..7b22e3cdbc81 100644
--- a/drivers/watchdog/wdt_pci.c
+++ b/drivers/watchdog/wdt_pci.c
@@ -412,7 +412,7 @@ static long wdtpci_ioctl(struct file *file, unsigned int cmd,
 	int new_heartbeat;
 	int status;
 
-	static struct watchdog_info ident = {
+	struct watchdog_info ident = {
 		.options =		WDIOF_SETTIMEOUT|
 					WDIOF_MAGICCLOSE|
 					WDIOF_KEEPALIVEPING,
diff --git a/drivers/watchdog/wm831x_wdt.c b/drivers/watchdog/wm831x_wdt.c
index 775bcd807f31..8c4b2d5bb7da 100644
--- a/drivers/watchdog/wm831x_wdt.c
+++ b/drivers/watchdog/wm831x_wdt.c
@@ -213,7 +213,7 @@ static ssize_t wm831x_wdt_write(struct file *file,
 	return count;
 }
 
-static struct watchdog_info ident = {
+static const struct watchdog_info ident = {
 	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
 	.identity = "WM831x Watchdog",
 };
diff --git a/drivers/watchdog/wm8350_wdt.c b/drivers/watchdog/wm8350_wdt.c
index a2d2e8eb2282..89dd7b035295 100644
--- a/drivers/watchdog/wm8350_wdt.c
+++ b/drivers/watchdog/wm8350_wdt.c
@@ -177,7 +177,7 @@ static ssize_t wm8350_wdt_write(struct file *file,
 	return count;
 }
 
-static struct watchdog_info ident = {
+static const struct watchdog_info ident = {
 	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
 	.identity = "WM8350 Watchdog",
 };
diff --git a/drivers/xen/sys-hypervisor.c b/drivers/xen/sys-hypervisor.c
index ae5cb05a1a1c..bb71ab2336c8 100644
--- a/drivers/xen/sys-hypervisor.c
+++ b/drivers/xen/sys-hypervisor.c
@@ -426,7 +426,7 @@ static ssize_t hyp_sysfs_store(struct kobject *kobj,
 	return 0;
 }
 
-static struct sysfs_ops hyp_sysfs_ops = {
+static const struct sysfs_ops hyp_sysfs_ops = {
 	.show = hyp_sysfs_show,
 	.store = hyp_sysfs_store,
 };
diff --git a/drivers/zorro/zorro.ids b/drivers/zorro/zorro.ids
index 0c0f99e2dd62..de24e3decedd 100644
--- a/drivers/zorro/zorro.ids
+++ b/drivers/zorro/zorro.ids
@@ -108,7 +108,7 @@
 	0c00  500XP/SupraDrive WordSync [SCSI Host Adapter]
 	0d00  SupraDrive WordSync II [SCSI Host Adapter]
 	1000  2400zi+ [Modem]
-0422  Computer Systems Assosiates
+0422  Computer Systems Associates
 	1100  Magnum 40 [Accelerator and SCSI Host Adapter]
 	1500  12 Gauge [SCSI Host Adapter]
 0439  Marc Michael Groth
diff --git a/firmware/bnx2x-e1-5.2.7.0.fw.ihex b/firmware/bnx2x-e1-5.2.7.0.fw.ihex
deleted file mode 100644
index a99c41c993b9..000000000000
--- a/firmware/bnx2x-e1-5.2.7.0.fw.ihex
+++ /dev/null
@@ -1,10178 +0,0 @@
-:10000000000028B0000000600000068800002918E9
-:100010000000161400002FA800000098000045C042
-:10002000000073C400004660000000CC0000BA2845
-:10003000000099A00000BAF800000094000154A04C
-:10004000000057BC00015538000000B80001ACF8B2
-:100050000000CE2C0001ADB80000000400027BE8D7
-:10006000020400480000000F020400540000004594
-:1000700002040058000000840204005C0000000636
-:100080000204007000000004020400780000000078
-:100090000204007C121700000204008022170000F6
-:1000A00002040084321700000604008800000005E6
-:1000B0000204009C12150000020400A0221500009A
-:1000C000020400A432150000060400A80000000489
-:1000D000020400B802100000020400BC001000007E
-:1000E000020400C010100000020400C42010000030
-:1000F000020400C830100000060400CC0000000418
-:10010000020400DC00100000020400E012140000F1
-:10011000020400E422140000020400E8321400008B
-:10012000060400EC000000040104012400000000AB
-:1001300001040128000000000104012C000000005F
-:10014000010401300000000002040004000000FF70
-:1001500002040008000000FF0204000C000000FF81
-:1001600002040010000000FF02040014000000FF61
-:1001700002040018000000FF0204001C000000FF41
-:1001800002040020000000FF020400240000003EE2
-:1001900002040028000000000204002C0000003FC0
-:1001A000020400300000003F020400340000003F61
-:1001B00002040038000000000204003C0000003F80
-:1001C000020400400000003F020400440000003F21
-:1001D00002042008000004110204200C00000400A6
-:1001E000020420100000040402042014000004197A
-:1001F0000204201C0000FFFF020420200000FFFF7B
-:10020000020420240000FFFF020420280000FFFF5A
-:1002100006042038000000020204204000000034E0
-:100220000204204400000035060420480000007C41
-:100230000204223807FFFFFF0204223C0000003FB7
-:100240000204224007FFFFFF020422440000000FC7
-:1002500001042248000000000104224C00000000BC
-:10026000010422500000000001042254000000009C
-:1002700001042258000000000104225C000000007C
-:10028000010422600000000001042264000000005C
-:1002900001042268000000000104226C000000003C
-:1002A000010422700000000001042274000000001C
-:1002B00001042278000000000104227C00000000FC
-:1002C000020424BC000000010C042000000003E82C
-:1002D0000A042000000000010B0420000000000AB6
-:1002E0000205004400000020020500480000003222
-:1002F000020500900215002002050094021500205E
-:1003000002050098000000300205009C0810000063
-:10031000020500A000000033020500A40000003028
-:10032000020500A800000031020500AC0000000238
-:10033000020500B000000005020500B40000000640
-:10034000020500B800000002020500BC0000000227
-:10035000020500C000000000020500C40000000506
-:10036000020500C800000002020500CC00000002E7
-:10037000020500D000000002020500D400000001C8
-:1003800002050114000000010205011C000000012B
-:100390000205012000000002020502040000000125
-:1003A0000205020C0000004002050210000000409F
-:1003B0000205021C000000200205022000000013BC
-:1003C0000205022400000020060502400000000A89
-:1003D0000405028000200000020500500000000714
-:1003E0000205005400000007020500580000000844
-:1003F0000205005C00000008060500600000000423
-:10040000020500D800000006020500E00000000D13
-:10041000020500E40000002D020500E800000007CE
-:10042000020500EC00000027020500F000000007B4
-:10043000020500F400000027020500F80000000794
-:10044000020500FC00000027020500040000000176
-:1004500002050008000000010205000C0000000178
-:100460000205001000000001020500140000000158
-:1004700002050018000000010205001C0000000138
-:100480000205002000000001020500240000000118
-:1004900002050028000000010205002C00000001F8
-:1004A00002050030000000010205003400000001D8
-:1004B00002050038000000010205003C00000001B8
-:1004C00002050040000000010406100002000020A8
-:1004D000020600DC00000001010600D80000000058
-:1004E0000406020000030220020600DC00000000F7
-:1004F00002060068000000B802060078000001143F
-:10050000010600B800000000010600C8000000005D
-:100510000206006C000000B80206007C0000011416
-:10052000010600BC00000000010600CC0000000035
-:100530000718040000960000081807600014022342
-:10054000071C000034C50000071C800034DB0D329E
-:10055000071D00000A1D1A69081D14405D78022558
-:100560000118000000000000011800040000000055
-:1005700001180008000000000118000C0000000035
-:100580000118001000000000011800140000000015
-:1005900002180020000000010218002400000002E0
-:1005A00002180028000000030218002C00000000C0
-:1005B000021800300000000402180034000000019E
-:1005C00002180038000000000218003C0000000182
-:1005D000021800400000000402180044000000005F
-:1005E00002180048000000010218004C000000033F
-:1005F0000218005000000000021800540000000122
-:1006000002180058000000040218005C00000000FE
-:1006100002180060000000010218006400000003DE
-:1006200002180068000000000218006C00000001C1
-:10063000021800700000000402180074000000009E
-:1006400002180078000000040218007C000000037B
-:100650000618008000000002021800A400003FFFFE
-:10066000021800A8000003FF021802240000000086
-:1006700002180234000000000218024C00000000C2
-:10068000021802E4000000FF061810000000040039
-:10069000021B8BC000000001021B80000000003420
-:1006A000021B804000000018021B80800000000C2C
-:1006B000021B80C0000000200C1B83000007A1204B
-:1006C0000A1B8300000001380B1B83000000138805
-:1006D000021B83C0000001F4061A2000000000B2D3
-:1006E000061A23C800000181041A29CC0001022740
-:1006F000061A1020000000C8061A100000000002B0
-:10070000061A1E3800000002061A1E300000000201
-:10071000061A080000000002061A0808000000027D
-:10072000061A081000000004041A1FB00005022871
-:10073000041A4CB00008022D061A22C8000000203E
-:10074000061A400000000124021A4920000000009F
-:10075000061A14000000000A061A145000000006D1
-:10076000061A150000000002041A150800050235DB
-:10077000061A151C00000009061A15800000001456
-:10078000061A09C000000048061A0800000000020E
-:10079000061A08200000000E041A1FB00002023AD8
-:1007A000061A2C2800000002061A23480000002028
-:1007B000061A449000000124021A49240000000097
-:1007C000061A14280000000A061A14680000000621
-:1007D000061A154000000002041A15480005023CE4
-:1007E000061A155C00000009061A15D00000001456
-:1007F000061A0AE000000048061A08080000000275
-:10080000061A08580000000E041A1FB80002024120
-:10081000061A2C30000000020200A2800000000135
-:100820000200A294071D29110200A29800000000F6
-:100830000200A29C009C04240200A2A00000000070
-:100840000200A2A4000002090200A4FCFF000000B4
-:10085000020100B400000001020100B80000000124
-:10086000020100DC000000010201010000000001A3
-:1008700002010104000000010201007C00300000C0
-:1008800002010084000000280201008C000000002A
-:1008900002010130000000040201025C00000001BE
-:1008A000020103280000000002010554000000308E
-:1008B000020100C400000001020100CC00000001A0
-:1008C000020100F800000001020100F00000000138
-:1008D00002010080003000000201008800000028B2
-:1008E0000201009000000000020101340000000439
-:1008F000020102DC000000010201032C00000000E4
-:100900000201056400000030020100C8000000017F
-:10091000020100D000000001020100FC0000000103
-:10092000020100F400000001020C10000000002091
-:10093000020C200800000A11020C200C00000A0022
-:10094000020C201000000A04020C201C0000FFFF13
-:10095000020C20200000FFFF020C20240000FFFFFB
-:10096000020C20280000FFFF060C203800000002C7
-:10097000020C204000000034020C2044000000352E
-:10098000020C204800000020020C204C0000002136
-:10099000020C205000000022020C20540000002312
-:1009A000020C205800000024020C205C00000025EE
-:1009B000020C206000000026020C206400000027CA
-:1009C000020C206800000028020C206C00000029A6
-:1009D000020C20700000002A020C20740000002B82
-:1009E000060C207800000056020C21D00000000107
-:1009F000020C21D400000001020C21D800000001EB
-:100A0000020C21DC00000001020C21E000000001CA
-:100A1000020C21E400000001020C21E800000001AA
-:100A2000020C21EC00000001020C21F0000000018A
-:100A3000020C21F400000001060C21F80000001057
-:100A4000020C223807FFFFFF020C223C0000003F8F
-:100A5000020C224007FFFFFF020C22440000000F9F
-:100A6000010C224800000000010C224C0000000094
-:100A7000010C225000000000010C22540000000074
-:100A8000010C225800000000010C225C0000000054
-:100A9000010C226000000000010C22640000000034
-:100AA000010C226800000000010C226C0000000014
-:100AB000010C227000000000010C227400000000F4
-:100AC000010C227800000000010C227C00000000D4
-:100AD000020C24BC000000010C0C2000000003E804
-:100AE0000A0C2000000000010B0C20000000000A8E
-:100AF000020C400800000365020C400C0000035487
-:100B0000020C401000000358020C40140000037552
-:100B1000020C401C0000FFFF020C40200000FFFF01
-:100B2000020C40240000FFFF020C40280000FFFFE1
-:100B3000020C403800000046020C403C000000055A
-:100B4000060C40400000005E020C41B800000001AD
-:100B5000060C41BC0000001F020C423807FFFFFFDB
-:100B6000020C423C0000003F020C424007FFFFFF26
-:100B7000020C42440000000F010C4248000000003B
-:100B8000010C424C00000000010C4250000000002B
-:100B9000010C425400000000010C4258000000000B
-:100BA000010C425C00000000010C426000000000EB
-:100BB000010C426400000000010C426800000000CB
-:100BC000010C426C00000000010C427000000000AB
-:100BD000010C427400000000010C4278000000008B
-:100BE000010C427C00000000010C4280000000006B
-:100BF000020C44C0000000010C0C4000000003E89F
-:100C00000A0C4000000000010B0C40000000000A2C
-:100C1000020D004400000032020D008C021500207D
-:100C2000020D009002150020020D00940810000033
-:100C3000020D009800000033020D009C000000022D
-:100C4000020D00A000000000020D00A4000000053D
-:100C5000020D00A800000005060D00AC0000000217
-:100C6000020D00B400000002020D00B800000003F5
-:100C7000020D00BC00000002020D00C000000001D7
-:100C8000020D00C800000002020D00CC00000002AE
-:100C9000020D010800000001020D015C00000001CE
-:100CA000020D016400000001020D01680000000255
-:100CB000020D020400000001020D020C00000020E1
-:100CC000020D021000000040020D0214000000405E
-:100CD000020D022000000003020D02240000001893
-:100CE000060D028000000012040D030000240243E0
-:100CF000020D004C00000001020D00500000000237
-:100D0000020D005400000008020D00580000000809
-:100D1000060D005C00000004020D00C40000000489
-:100D2000020D011400000009020D01180000002945
-:100D3000020D011C0000000A020D01200000002A23
-:100D4000020D012400000007020D01280000002709
-:100D5000020D012C00000007020D013000000027E9
-:100D6000020D01340000000C020D01380000002CBF
-:100D7000020D013C0000000C020D01400000002C9F
-:100D8000020D01440000000C020D01480000002C7F
-:100D9000020D000400000001020D00080000000127
-:100DA000020D000C00000001020D00100000000107
-:100DB000020D001400000001020D001800000001E7
-:100DC000020D001C00000001020D002000000001C7
-:100DD000020D002400000001020D002800000001A7
-:100DE000020D002C00000001020D00300000000187
-:100DF000020D003400000001020D00380000000167
-:100E0000020D003C00000001020E004C0000003208
-:100E1000020E009402150020020E00980215002018
-:100E2000020E009C00000030020E00A0081000001E
-:100E3000020E00A400000033020E00A800000030E3
-:100E4000020E00AC00000031020E00B000000002F3
-:100E5000020E00B400000004020E00B80000000002
-:100E6000020E00BC00000002020E00C000000002E2
-:100E7000020E00C400000000020E00C800000002C4
-:100E8000020E00CC00000007020E00D0000000029D
-:100E9000020E00D400000002020E00D80000000183
-:100EA000020E00E400000001020E014400000001F7
-:100EB000020E014C00000001020E01500000000271
-:100EC000020E020400000001020E020C00000040AD
-:100ED000020E021000000040020E021C000000047E
-:100EE000020E022000000020020E02240000000E6C
-:100EF000020E02280000001B060E03000000001274
-:100F0000040E0280001B0267020E00540000000C59
-:100F1000020E005800000009020E005C0000000FE5
-:100F2000020E006000000010060E006400000004C5
-:100F3000020E00DC00000003020E01100000000F92
-:100F4000020E01140000002F020E01180000000E16
-:100F5000020E011C0000002E020E00040000000121
-:100F6000020E000800000001020E000C000000014B
-:100F7000020E001000000001020E0014000000012B
-:100F8000020E001800000001020E001C000000010B
-:100F9000020E002000000001020E002400000001EB
-:100FA000020E002800000001020E002C00000001CB
-:100FB000020E003000000001020E003400000001AB
-:100FC000020E003800000001020E003C000000018B
-:100FD000020E004000000001020E0044000000016B
-:100FE0000730040000CA00000830076800130282BE
-:100FF00007340000336100000734800037270CD924
-:10100000073500002F111AA30835708051F00284B3
-:10101000013000000000000001300004000000006A
-:1010200001300008000000000130000C000000004A
-:10103000013000100000000001300014000000002A
-:1010400002300020000000010230002400000002F5
-:1010500002300028000000030230002C00000000D5
-:1010600002300030000000040230003400000001B3
-:1010700002300038000000000230003C0000000197
-:101080000230004000000004023000440000000074
-:1010900002300048000000010230004C0000000354
-:1010A0000230005000000000023000540000000137
-:1010B00002300058000000040230005C0000000014
-:1010C00002300060000000010230006400000003F4
-:1010D00002300068000000000230006C00000001D7
-:1010E00002300070000000040230007400000000B4
-:1010F00002300078000000040230007C0000000391
-:101100000630008000000002023000A400003FFF13
-:10111000023000A8000003FF02300224000000009B
-:1011200002300234000000000230024C00000000D7
-:10113000023002E40000FFFF06302000000008003B
-:1011400002338BC000000001023380000000001A4F
-:10115000023380400000004E023380800000001007
-:10116000023380C0000000200C3383000007A12060
-:101170000A338300000001380B338300000013881A
-:10118000023383C0000001F40C3383801DCD650061
-:101190000A3383800004C4B40B338380004C4B407B
-:1011A00006321AA0000000C206321020000000C85B
-:1011B0000632100000000002063214000000004059
-:1011C00006325098000000040632508000000005EE
-:1011D00004325094000102860632500000000020C4
-:1011E00004322830000202870233080001000000A8
-:1011F00004330C00001002890233080000000000D4
-:1012000004330C400010029906321500000000B4AF
-:1012100002321DC80000000006324000000000D865
-:10122000063217D0000000B402321DCC00000000CE
-:1012300006324360000000D807200400009200003E
-:1012400008200780001002A9072400002CD100000C
-:10125000072480002AE50B350824DC6062DA02AB43
-:101260000120000000000000012000040000000038
-:1012700001200008000000000120000C0000000018
-:1012800001200010000000000120001400000000F8
-:1012900002200020000000010220002400000002C3
-:1012A00002200028000000030220002C00000000A3
-:1012B0000220003000000004022000340000000181
-:1012C00002200038000000000220003C0000000165
-:1012D0000220004000000004022000440000000042
-:1012E00002200048000000010220004C0000000322
-:1012F0000220005000000000022000540000000105
-:1013000002200058000000040220005C00000000E1
-:1013100002200060000000010220006400000003C1
-:1013200002200068000000000220006C00000001A4
-:101330000220007000000004022000740000000081
-:1013400002200078000000040220007C000000035E
-:101350000620008000000002022000A400003FFFE1
-:10136000022000A8000003FF022002240000000069
-:1013700002200234000000000220024C00000000A5
-:10138000022002E40000FFFF062020000000080009
-:1013900002238BC000000001022380000000001027
-:1013A00002238040000000120223808000000030F1
-:1013B000022380C00000000E022383C0000001F45D
-:1013C000062250000000004206221020000000C843
-:1013D000062210000000000206222000000000C0CB
-:1013E000062225C00000024004222EC8000802ADDB
-:1013F00002230800013FFFFF04230C00001002B588
-:10140000022308000000000004230C40001002C565
-:1014100006223040000000A00622354000000010E7
-:10142000062236C000000030062240000000020004
-:10143000062235C00000002006223840000000309F
-:1014400006223000000000080222511800000000AF
-:10145000062223000000000E0622241000000030A7
-:10146000062232C0000000A00622358000000010D5
-:1014700006223780000000300622480000000200EB
-:10148000062236400000002006223900000000300D
-:1014900006223020000000080222511C000000003B
-:1014A000062223380000000E062224D0000000305F
-:1014B00002161000000000280217000800000002B9
-:1014C0000217002C000000030217003C000000047B
-:1014D0000217004400000008021700480000000244
-:1014E0000217004C0000009002170050000000900E
-:1014F00002170054008000900217005808140000E2
-:10150000021700600000008A0217006400000080DB
-:1015100002170068000000810217006C00000080C4
-:10152000021700700000000602170078000007D0C4
-:101530000217007C0000076C02170038007C1004C2
-:10154000021700040000000F0616402400000002ED
-:10155000021640700000001C021642080000000144
-:101560000216421000000001021642200000000195
-:10157000021642280000000102164230000000015D
-:10158000021642380000000102164260000000010D
-:101590000C16401C0003D0900A16401C0000009C52
-:1015A0000B16401C000009C4021640300000000861
-:1015B000021640340000000C0216403800000010F3
-:1015C0000216404400000020021640000000000106
-:1015D000021640D800000001021640080000000179
-:1015E0000216400C0000000102164010000000012D
-:1015F00002164240000000000216424800000000AF
-:101600000616427000000002021642500000000060
-:101610000216425800000000061642800000000238
-:1016200002166008000006140216600C0000060096
-:1016300002166010000006040216601C0000FFFF86
-:10164000021660200000FFFF021660240000FFFF6A
-:10165000021660280000FFFF02166038000000201C
-:101660000216603C000000200216604000000034BA
-:101670000216604400000035021660480000002396
-:101680000216604C00000024021660500000002585
-:101690000216605400000026021660580000002761
-:1016A0000216605C00000029021660600000002A3B
-:1016B000021660640000002B021660680000002C17
-:1016C0000216606C0000002D0616607000000052CB
-:1016D000021661B800000001061661BC0000001F80
-:1016E0000216623807FFFFFF0216623C0000003F4F
-:1016F0000216624007FFFFFF021662440000000F5F
-:1017000001166248000000000116624C0000000053
-:101710000116625000000000011662540000000033
-:1017200001166258000000000116625C0000000013
-:1017300001166260000000000116626400000000F3
-:1017400001166268000000000116626C00000000D3
-:1017500001166270000000000116627400000000B3
-:1017600001166278000000000116627C0000000093
-:10177000021664BC000000010C166000000003E8C3
-:101780000A166000000000010B1660000000000A4D
-:10179000021680400000000602168044000000058A
-:1017A000021680480000000A0216804C0000000566
-:1017B0000216805400000002021680CC00000004D3
-:1017C000021680D000000004021680D4000000043D
-:1017D000021680D800000004021680DC000000041D
-:1017E000021680E000000004021680E400000004FD
-:1017F000021680E8000000040216880400000004BD
-:10180000021680300000007C021680340000003D8B
-:10181000021680380000003F0216803C0000009C49
-:10182000021680F000000007061680F40000000594
-:101830000216880C01010101021681080000000057
-:101840000216810C00000004021681100000000442
-:1018500002168114000000020216881008012004FC
-:1018600002168118000000050216811C0000000508
-:1018700002168120000000050216812400000005E8
-:101880000216882C2008100102168128000000088A
-:101890000216812C000000060216813000000007AD
-:1018A0000216813400000000021688300101012078
-:1018B0000616813800000004021688340101010177
-:1018C0000616814800000004021688380101010153
-:1018D00006168158000000040216883C010101012F
-:1018E00006168168000000030216817400000001E2
-:1018F00002168840010101010216817800000001F2
-:101900000216817C000000010216818000000001A7
-:1019100002168184000000010216884401010101C1
-:1019200002168188000000010216818C000000046C
-:10193000021681900000000402168194000000024B
-:10194000021688480801200402168198000000054C
-:101950000216819C00000005021681A0000000050F
-:10196000021681A400000005021688142008100148
-:10197000021681A800000008021681AC00000006D3
-:10198000021681B000000007021681B400000001B9
-:101990000216881801010120021681B8000000011A
-:1019A000021681BC00000001021681C00000000187
-:1019B000021681C4000000010216881C0101010109
-:1019C000021681C800000001021681CC000000014F
-:1019D000021681D000000001021681D4000000012F
-:1019E0000216882001010101021681D800000001C1
-:1019F000021681DC00000001021681E000000001F7
-:101A0000021681E400000001021688240101010190
-:101A1000021681E800000001021681EC00000001BE
-:101A2000021681F000000001021688280101010160
-:101A300002168240FFFF003F0616824400000002AB
-:101A40000216824CFFFF003F021682500000010088
-:101A5000021682540000010006168258000000029F
-:101A600002168260000000C002168264000000C0FE
-:101A70000216826800001E000216826C00001E0022
-:101A800002168270000040000216827400004000BE
-:101A900002168278000080000216827C000080001E
-:101AA00002168280000020000216828400002000BE
-:101AB0000616828800000007021682A400000001BA
-:101AC000061682A80000000A021681F400000C0825
-:101AD000021681F800000040021681FC000001009F
-:101AE0000216820000000020021682040000001787
-:101AF00002168208000000800216820C000002001C
-:101B0000021682100000000002168218FFFF01FF7B
-:101B100002168214FFFF01FF0216823C0000001330
-:101B2000021680900000013F021680600000014014
-:101B30000216806400000140061680680000000262
-:101B400002168070000000C00616807400000007B6
-:101B50000216809C00000048021680A00000004889
-:101B6000061680A400000002021680AC00000048A7
-:101B7000061680B0000000070216823800008000C0
-:101B800002168234000025E40216809400007FFFD4
-:101B900002168220000000070216821C00000007C7
-:101BA000021682280000000002168224FFFFFFFFB9
-:101BB00002168230000000000216822CFFFFFFFF99
-:101BC000021680EC000000FF02140000000000017B
-:101BD0000214000C0000000102140040000000018B
-:101BE0000214004400007FFF0214000C00000000FB
-:101BF00002140000000000000214006C000000004D
-:101C00000214000400000001021400300000000172
-:101C100002140004000000000214005C0000000038
-:101C2000021400080000000102140034000000014A
-:101C30000214000800000000021400600000000010
-:101C40000202005800000032020200A0031500202A
-:101C5000020200A403150020020200A801000030C7
-:101C6000020200AC08100000020200B000000033C5
-:101C7000020200B400000030020200B8000000318F
-:101C8000020200BC00000003020200C000000006C7
-:101C9000020200C400000003020200C800000003AA
-:101CA000020200CC00000002020200D0000000008E
-:101CB000020200D400000002020200DC000000006A
-:101CC000020200E000000006020200E4000000043E
-:101CD000020200E800000002020200EC0000000224
-:101CE000020200F000000001020200FC00000006F9
-:101CF0000202012000000000020201340000000284
-:101D0000020201B0000000010202020C000000010A
-:101D10000202021400000001020202180000000288
-:101D200002020404000000010202040C0000004052
-:101D300002020410000000400202041C0000000423
-:101D4000020204200000002002020424000000021D
-:101D5000020204280000001F060205000000001215
-:101D600004020480001F02D5020200600000000F80
-:101D70000202006400000007020200680000000B7D
-:101D80000202006C0000000E060200700000000459
-:101D9000020200F40000000402020004000000013E
-:101DA00002020008000000010202000C0000000115
-:101DB00002020010000000010202001400000001F5
-:101DC00002020018000000010202001C00000001D5
-:101DD00002020020000000010202002400000001B5
-:101DE00002020028000000010202002C0000000195
-:101DF0000202003000000001020200340000000175
-:101E000002020038000000010202003C0000000154
-:101E10000202004000000001020200440000000134
-:101E200002020048000000010202004C0000000114
-:101E3000020200500000000102020108000000C878
-:101E40000202011800000002020201C400000000AA
-:101E5000020201CC00000000020201D400000002D6
-:101E6000020201DC00000002020201E4000000FFA7
-:101E7000020201EC000000FF0202010C000000C899
-:101E80000202011C00000002020201C80000000062
-:101E9000020201D000000000020201D8000000028E
-:101EA000020201E000000002020201E8000000FF5F
-:101EB000020201F0000000FF0728040000B5000046
-:101EC00008280768001302F4072C000035D300002F
-:101ED000072C80003A3E0D75072D00003B541C0571
-:101EE000072D800022BC2ADB082DC770471202F69E
-:101EF000012800000000000001280004000000008C
-:101F000001280008000000000128000C000000006B
-:101F1000012800100000000001280014000000004B
-:101F20000228002000000001022800240000000216
-:101F300002280028000000030228002C00000000F6
-:101F400002280030000000040228003400000001D4
-:101F500002280038000000000228003C00000001B8
-:101F60000228004000000004022800440000000095
-:101F700002280048000000010228004C0000000375
-:101F80000228005000000000022800540000000158
-:101F900002280058000000040228005C0000000035
-:101FA0000228006000000001022800640000000315
-:101FB00002280068000000000228006C00000001F8
-:101FC00002280070000000040228007400000000D5
-:101FD00002280078000000040228007C00000003B2
-:101FE0000628008000000002022800A400003FFF35
-:101FF000022800A8000003FF0228022400000000BD
-:1020000002280234000000000228024C00000000F8
-:10201000022802E40000FFFF06282000000008005C
-:10202000022B8BC000000001022B8000000000008A
-:10203000022B804000000018022B80800000000C62
-:10204000022B80C0000000660C2B83000007A1203B
-:102050000A2B8300000001380B2B8300000013883B
-:10206000022B83C0000001F40C2B8340000001F41C
-:102070000A2B8340000000000B2B8340000000056A
-:102080000A2B83800004C4B40C2B83801DCD650013
-:102090000B2B8380004C4B40062A3C400000000480
-:1020A000042A3C50000202F8062A300000000048D2
-:1020B000062A1020000000C8062A100000000002B6
-:1020C000062A31280000008E022A33680000000032
-:1020D000042A3370000202FA042A3A70000402FC57
-:1020E000042A3D0000020300042A15000002030236
-:1020F000062A150800000100022A197000000000DD
-:10210000022A197800000000042A19600002030462
-:10211000062A4AC000000002062A4B000000000404
-:10212000042A1F4800020306022B080000000000DA
-:10213000042B0C0000100308022B08000100000013
-:10214000042B0C4000080318022B080002000000BA
-:10215000042B0C6000080320062A3A8000000014BB
-:10216000062A3B2000000024062A14000000000A72
-:10217000062A145000000006062A3378000000D812
-:10218000022A3A3800000000042A3C5800020328C2
-:10219000042A3C680010032A062A5020000000028E
-:1021A000062A503000000002062A500000000002FB
-:1021B000062A501000000002022A504000000000D1
-:1021C000062A50480000000E022A50B80000000104
-:1021D000042A4AC80002033A062A4B1000000042B3
-:1021E000062A4D2000000004062A3AD00000001400
-:1021F000062A3BB000000024062A14280000000A2A
-:10220000062A146800000006062A36D8000000D806
-:10221000022A3A3C00000000042A3C600002033C11
-:10222000042A3CA80010033E062A502800000002A1
-:10223000062A503800000002062A5008000000025A
-:10224000062A501800000002022A50440000000034
-:10225000062A50800000000E022A50BC0000000137
-:10226000042A4AD00002034E062A4C1800000042FD
-:10227000062A4D3000000004021010080000000182
-:102280000210101000000264021010000003D000C1
-:10229000021010040000003D091018000200035055
-:1022A00009101100002005500610118000000002E6
-:1022B0000910118800060570061011A00000001812
-:1022C000021010100000000006102400000000E0C2
-:1022D0000210201C0000000002102020000000015D
-:1022E000021020C0000000010210200400000001C4
-:1022F000021020080000000109103C0000050576CE
-:1023000009103C200005057B0910380000050580F8
-:1023100002104028000000100210404400003FFF5F
-:102320000210405800280000021040840084924AA5
-:1023300002104058000000000610806800000004F1
-:1023400002108000000010800610802800000002AB
-:102350000210803800000010021080400000FFFFD3
-:10236000021080440000FFFF0210805000000000B7
-:102370000210810000000000061081200000000211
-:1023800002108008000002B502108010000000005A
-:10239000061082000000004A021081080001FFFFC1
-:1023A00006108140000000020210800000001A8028
-:1023B0000610900000000024061091200000004A42
-:1023C000061093700000004A061095C00000004AF5
-:1023D000021080040000108006108030000000020F
-:1023E0000210803C00000010021080480000FFFF37
-:1023F0000210804C0000FFFF02108054000000001B
-:102400000210810400000000061081280000000274
-:102410000210800C000002B50210801400000000C1
-:10242000061084000000004A0210810C0001FFFF2A
-:1024300006108148000000020210800400001A808B
-:102440000610909000000024061092480000004AF8
-:10245000061094980000004A061096E80000004A12
-:102460000212049000E383400212051400003C10A5
-:10247000021205200000000202120494FFFFFFFF79
-:1024800002120498FFFFFFFF0212049CFFFFFFFFF0
-:10249000021204A0FFFFFFFF021204A4FFFFFFFFD0
-:1024A000021204A8FFFFFFFF021204ACFFFFFFFFB0
-:1024B000021204B0FFFFFFFF021204B8FFFFFFFF8C
-:1024C000021204BCFFFFFFFF021204C0FFFFFFFF68
-:1024D000021204C4FFFFFFFF021204C8FFFFFFFF48
-:1024E000021204CCFFFFFFFF021204D0FFFFFFFF28
-:1024F000021204DCFFFFFFFF021204E0FFFFFFFFF8
-:10250000021204E4FFFFFFFF021204E8FFFFFFFFD7
-:10251000021204ECFFFFFFFF021204F0FFFFFFFFB7
-:10252000021204F4FFFFFFFF021204F8FFFFFFFF97
-:10253000021204FCFFFFFFFF02120500FFFFFFFF76
-:1025400002120504FFFFFFFF02120508FFFFFFFF55
-:102550000212050CFFFFFFFF02120510FFFFFFFF35
-:10256000021204D4FFFF3330021204D8FFFF3340BD
-:10257000021204B4F00030000212039000000008C0
-:102580000212039C00000008061203A000000002D3
-:10259000021203BC00000004021203C40000000485
-:1025A000021203D000000000021203DC0000000051
-:1025B0000212036C00000001021203680000003FD9
-:1025C000021201BC00000040021201C00000180805
-:1025D000021201C400000803021201C8000008032F
-:1025E000021201CC00000040021201D000000003E2
-:1025F000021201D400000803021201D800000803EF
-:10260000021201DC00000803021201E000010003D5
-:10261000021201E400000803021201E800000803AE
-:10262000021201EC00000003021201F0000000039E
-:10263000021201F400000003021201F8000000037E
-:10264000021201FC0000000302120200000000035D
-:10265000021202040000000302120208000000033C
-:102660000212020C0000000302120210000000031C
-:1026700002120214000000030212021800000003FC
-:102680000212021C000000030212022000000003DC
-:102690000212022400000003021202280000240398
-:1026A0000212022C0000002F02120230000000096A
-:1026B00002120234000000190212023800000184E4
-:1026C0000212023C000001830212024000000306D5
-:1026D0000212024400000019021202480000000623
-:1026E0000212024C00000306021202500000030610
-:1026F00002120254000003060212025800000C8667
-:102700000212025C000003060212026000000306CF
-:1027100002120264000000060212026800000006B5
-:102720000212026C00000006021202700000000695
-:102730000212027400000006021202780000000675
-:102740000212027C00000006021202800000000655
-:102750000212028400000006021202880000000635
-:102760000212028C00000006021202900000000615
-:1027700002120294000000060212029800000006F5
-:102780000212029C00000006021202A000000306D2
-:10279000021202A400000013021202A800000006A8
-:1027A000021202B000001004021202B40000100471
-:1027B0000212032400106440021203280010644037
-:1027C000021201B0000000010600A0000000001687
-:1027D0000200A06CBF5C00000200A070FFF51FEFBC
-:1027E0000200A0740000FFFF0200A078500003E088
-:1027F0000200A07C000000000200A0800000A000F9
-:102800000600A084000000050200A0980FE0000070
-:102810000600A09C000000140200A0EC555400002B
-:102820000200A0F0555555550200A0F40000555582
-:102830000200A0F8000000000200A0FC55540000B7
-:102840000200A100555555550200A1040000555540
-:102850000200A108000000000200A22C00000000FD
-:102860000600A230000000030200A0600000000784
-:102870000200A10CBF5C00000200A110FFF51FEFD9
-:102880000200A1140000FFFF0200A118500003E0A5
-:102890000200A11C000000000200A1200000A00016
-:1028A0000600A124000000050200A1380FE000008E
-:1028B0000600A13C000000140200A18C5554000049
-:1028C0000200A190555555550200A19400005555A0
-:1028D0000200A198000000000200A19C55540000D5
-:1028E0000200A1A0555555550200A1A40000555560
-:1028F0000200A1A8000000000200A23C00000000AD
-:102900000600A240000000030200A06400000007CF
-:1029100000000000000000000000002E0000000089
-:1029200000000000000000000000000000000000A7
-:102930000000000000000000000000000000000097
-:102940000000000000000000000000000000000087
-:102950000000000000000000000000000000000077
-:102960000000000000000000000000000000000067
-:10297000002E0050000000000000000000000000D9
-:102980000000000000000000000000000000000047
-:102990000000000000000000000000000050008D5A
-:1029A0000000000000000000000000000000000027
-:1029B0000000000000000000000000000000000017
-:1029C0000000000000000000008D009200920096C0
-:1029D0000096009A000000000000000000000000C7
-:1029E00000000000000000000000000000000000E7
-:1029F00000000000009A00DB00DB00E900E900F7BE
-:102A000000000000000000000000000000000000C6
-:102A100000000000000000000000000000000000B6
-:102A200000000000000000000000000000000000A6
-:102A30000000000000000000000000000000000096
-:102A40000000000000000000000000000000000086
-:102A50000000000000000000000000000000000076
-:102A60000000000000000000000000000000000066
-:102A70000000000000000000000000000000000056
-:102A80000000000000000000000000000000000046
-:102A90000000000000000000000000000000000036
-:102AA0000000000000000000000000000000000026
-:102AB0000000000000000000000000000000000016
-:102AC0000000000000000000000000000000000006
-:102AD00000F700FE00000000000000000000000001
-:102AE00000000000000000000000000000000000E6
-:102AF00000000000000000000000000000000000D6
-:102B000000000000000000000000000000000000C5
-:102B100000000000000000000000000000000000B5
-:102B2000000000000000000000FE01030103010E90
-:102B3000010E01190000000000000000000000006C
-:102B40000000000000000000000000000000000085
-:102B50000000000000000000000000000000000075
-:102B60000000000000000000000000000000000065
-:102B70000000000000000000000000000000000055
-:102B80000119011A00000000000000000000000010
-:102B90000000000000000000000000000000000035
-:102BA000000000000000000000000000011A0152B7
-:102BB0000000000000000000000000000000000015
-:102BC0000000000000000000000000000000000005
-:102BD000000000000000000001520176000000002B
-:102BE00000000000000000000000000000000000E5
-:102BF00000000000000000000000000000000000D5
-:102C000000000000017601B5000000000000000097
-:102C100000000000000000000000000000000000B4
-:102C200000000000000000000000000000000000A4
-:102C300001B501F0000000000000000000000000ED
-:102C40000000000000000000000000000000000084
-:102C500000000000000000000000000001F002354C
-:102C6000023502380238023B00000000000000007C
-:102C70000000000000000000000000000000000054
-:102C80000000000000000000023B02760276028095
-:102C90000280028A00000000000000000000000026
-:102CA0000000000000000000000000000000000024
-:102CB00000000000028A028B0000000000000000FB
-:102CC0000000000000000000000000000000000004
-:102CD00000000000000000000000000000000000F4
-:102CE000028B029D000000000000000000000000B8
-:102CF00000000000000000000000000000000000D4
-:102D0000000000000000000000000000029D02B270
-:102D100002B202B502B502B80000000000000000D7
-:102D200000000000000000000000000000000000A3
-:102D3000000000000000000002B802E600000000F1
-:102D40000000000000000000000000000000000083
-:102D50000000000000000000000000000000000073
-:102D60000000000002E6036D00000000000000000B
-:102D70000000000000000000000000000000000053
-:102D80000000000000000000000000000000000043
-:102D9000036D0374037403780378037C0000000060
-:102DA0000000000000000000000000000000000023
-:102DB000000000000000000000000000037C03BBD6
-:102DC00003BB03C303C303CB0000000000000000EB
-:102DD00000000000000000000000000000000000F3
-:102DE000000000000000000003CB041F041F04319A
-:102DF0000431044300000000000000000000000057
-:102E000000000000000000000000000000000000C2
-:102E1000000000000443044D00000000000000001A
-:102E200000000000000000000000000000000000A2
-:102E30000000000000000000000000000000000092
-:102E4000044D0453000000000000000000000000DA
-:102E50000000000000000000000000000000000072
-:102E600000000000000000000000000004530456B1
-:102E70000000000000000000000000000000000052
-:102E80000000000000000000000000000000000042
-:102E900000000000000000000456045B0000000079
-:102EA0000000000000000000000000000000000022
-:102EB0000000000000000000000000000000000012
-:102EC00000000000045B045C045C046E046E04807B
-:102ED00000000000000000000000000000000000F2
-:102EE00000000000000000000000000000000000E2
-:102EF000048004ED0000000000000000000000005D
-:102F000000000000000000000000000000000000C1
-:102F100000000000000000000000000004ED04EECE
-:102F200004EE050205020516000000000000000086
-:102F30000000000000000000000000000000000091
-:102F40000000000000000000000000000000000081
-:102F50000000000000000000000000000000000071
-:102F60000000000000000000000000000000000061
-:102F70000000000000000000000000000000000051
-:102F80000000000000000000000000000000000041
-:102F90000000000000000000000000000000000031
-:102FA000000000000000000000010000000204C05A
-:102FB0000003098000040E4000051300000617C03E
-:102FC00000071C800008214000092600000A2AC0D2
-:102FD000000B2F80000C3440000D3900000E3DC066
-:102FE000000F42800010474000114C00001250C0FA
-:102FF0000013558000145A4000155F00001663C08E
-:103000000017688000186D4000197200001A76C021
-:10301000001B7B80001C8040001D8500001E89C0B5
-:10302000001F8E8000209340000020000000400020
-:1030300000006000000080000000A0000000C00050
-:103040000000E0000001000000012000000140003D
-:1030500000016000000180000001A0000001C0002C
-:103060000001E00000020000000220000002400019
-:1030700000026000000280000002A0000002C00008
-:103080000002E000000300000003200000034000F5
-:1030900000036000000380000003A0000003C000E4
-:1030A0000003E000000400000004200000044000D1
-:1030B00000046000000480000004A0000004C000C0
-:1030C0000004E000000500000005200000054000AD
-:1030D00000056000000580000005A0000005C0009C
-:1030E0000005E00000060000000620000006400089
-:1030F00000066000000680000006A0000006C00078
-:103100000006E00000070000000720000007400064
-:1031100000076000000780000007A0000007C00053
-:103120000007E00000080000000820000008400040
-:1031300000086000000880000008A0000008C0002F
-:103140000008E0000009000000092000000940001C
-:1031500000096000000980000009A0000009C0000B
-:103160000009E000000A0000000A2000000A4000F8
-:10317000000A6000000A8000000AA000000AC000E7
-:10318000000AE000000B0000000B2000000B4000D4
-:10319000000B6000000B8000000BA000000BC000C3
-:1031A000000BE000000C0000000C2000000C4000B0
-:1031B000000C6000000C8000000CA000000CC0009F
-:1031C000000CE000000D0000000D2000000D40008C
-:1031D000000D6000000D8000000DA000000DC0007B
-:1031E000000DE000000E0000000E2000000E400068
-:1031F000000E6000000E8000000EA000000EC00057
-:10320000000EE000000F0000000F2000000F400043
-:10321000000F6000000F8000000FA000000FC00032
-:10322000000FE0000010000000102000001040001F
-:1032300000106000001080000010A0000010C0000E
-:103240000010E000001100000011200000114000FB
-:1032500000116000001180000011A0000011C000EA
-:103260000011E000001200000012200000124000D7
-:1032700000126000001280000012A0000012C000C6
-:103280000012E000001300000013200000134000B3
-:1032900000136000001380000013A0000013C000A2
-:1032A0000013E0000014000000142000001440008F
-:1032B00000146000001480000014A0000014C0007E
-:1032C0000014E0000015000000152000001540006B
-:1032D00000156000001580000015A0000015C0005A
-:1032E0000015E00000160000001620000016400047
-:1032F00000166000001680000016A0000016C00036
-:103300000016E00000170000001720000017400022
-:1033100000176000001780000017A0000017C00011
-:103320000017E000001800000018200000184000FE
-:1033300000186000001880000018A0000018C000ED
-:103340000018E000001900000019200000194000DA
-:1033500000196000001980000019A0000019C000C9
-:103360000019E000001A0000001A2000001A4000B6
-:10337000001A6000001A8000001AA000001AC000A5
-:10338000001AE000001B0000001B2000001B400092
-:10339000001B6000001B8000001BA000001BC00081
-:1033A000001BE000001C0000001C2000001C40006E
-:1033B000001C6000001C8000001CA000001CC0005D
-:1033C000001CE000001D0000001D2000001D40004A
-:1033D000001D6000001D8000001DA000001DC00039
-:1033E000001DE000001E0000001E2000001E400026
-:1033F000001E6000001E8000001EA000001EC00015
-:10340000001EE000001F0000001F2000001F400001
-:10341000001F6000001F8000001FA000001FC000F0
-:10342000001FE000002000000020200000204000DD
-:1034300000206000002080000020A0000020C000CC
-:103440000020E000002100000021200000214000B9
-:1034500000216000002180000021A0000021C000A8
-:103460000021E00000220000002220000022400095
-:1034700000226000002280000022A0000022C00084
-:103480000022E00000230000002320000023400071
-:1034900000236000002380000023A0000023C00060
-:1034A0000023E0000024000000242000002440004D
-:1034B00000246000002480000024A0000024C0003C
-:1034C0000024E00000250000002520000025400029
-:1034D00000256000002580000025A0000025C00018
-:1034E0000025E00000260000002620000026400005
-:1034F00000266000002680000026A0000026C000F4
-:103500000026E000002700000027200000274000E0
-:1035100000276000002780000027A0000027C000CF
-:103520000027E000002800000028200000284000BC
-:1035300000286000002880000028A0000028C000AB
-:103540000028E00000290000002920000029400098
-:1035500000296000002980000029A0000029C00087
-:103560000029E000002A0000002A2000002A400074
-:10357000002A6000002A8000002AA000002AC00063
-:10358000002AE000002B0000002B2000002B400050
-:10359000002B6000002B8000002BA000002BC0003F
-:1035A000002BE000002C0000002C2000002C40002C
-:1035B000002C6000002C8000002CA000002CC0001B
-:1035C000002CE000002D0000002D2000002D400008
-:1035D000002D6000002D8000002DA000002DC000F7
-:1035E000002DE000002E0000002E2000002E4000E4
-:1035F000002E6000002E8000002EA000002EC000D3
-:10360000002EE000002F0000002F2000002F4000BF
-:10361000002F6000002F8000002FA000002FC000AE
-:10362000002FE0000030000000302000003040009B
-:1036300000306000003080000030A0000030C0008A
-:103640000030E00000310000003120000031400077
-:1036500000316000003180000031A0000031C00066
-:103660000031E00000320000003220000032400053
-:1036700000326000003280000032A0000032C00042
-:103680000032E0000033000000332000003340002F
-:1036900000336000003380000033A0000033C0001E
-:1036A0000033E0000034000000342000003440000B
-:1036B00000346000003480000034A0000034C000FA
-:1036C0000034E000003500000035200000354000E7
-:1036D00000356000003580000035A0000035C000D6
-:1036E0000035E000003600000036200000364000C3
-:1036F00000366000003680000036A0000036C000B2
-:103700000036E0000037000000372000003740009E
-:1037100000376000003780000037A0000037C0008D
-:103720000037E0000038000000382000003840007A
-:1037300000386000003880000038A0000038C00069
-:103740000038E00000390000003920000039400056
-:1037500000396000003980000039A0000039C00045
-:103760000039E000003A0000003A2000003A400032
-:10377000003A6000003A8000003AA000003AC00021
-:10378000003AE000003B0000003B2000003B40000E
-:10379000003B6000003B8000003BA000003BC000FD
-:1037A000003BE000003C0000003C2000003C4000EA
-:1037B000003C6000003C8000003CA000003CC000D9
-:1037C000003CE000003D0000003D2000003D4000C6
-:1037D000003D6000003D8000003DA000003DC000B5
-:1037E000003DE000003E0000003E2000003E4000A2
-:1037F000003E6000003E8000003EA000003EC00091
-:10380000003EE000003F0000003F2000003F40007D
-:10381000003F6000003F8000003FA000003FC0006C
-:10382000003FE000003FE00100000000000001FF59
-:103830000000020000007FF800007FF80000026F27
-:1038400000001500000000010000000300BEBC20C5
-:103850000000000300BEBC2000000001FFFFFFFFCE
-:10386000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF68
-:10387000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF58
-:1038800000000000FFFFFFFF00000000FFFFFFFF40
-:103890000000000300BEBC20FFFFFFFF000000008F
-:1038A000FFFFFFFF00000000FFFFFFFF000000031D
-:1038B00000BEBC2000002000000040C0000061806D
-:1038C000000082400000A3000000C3C00000E480AC
-:1038D0000001054000012600000146C0000167808C
-:1038E000000188400001A9000001C9C00001EA8070
-:1038F00000020B4000022C0000024CC000026D8050
-:1039000000028E400002AF000002CFC00002F08033
-:103910000003114000033200000352C00003738013
-:10392000000394400003B5000003D5C00003F680F7
-:103930000004174000043800000458C000047980D7
-:1039400000049A400000800000010380000187000D
-:1039500000020A8000028E0000031180000395001F
-:103960000004188000049C0000051F800005A300CF
-:10397000000626800006AA0000072D800007B1007F
-:10398000000834800008B80000093B800009BF002F
-:10399000000A4280000AC600000B4980000BCD00DF
-:1039A000000C5080000CD400000D5780000DDB008F
-:1039B00000007FF800007FF800000174000015008F
-:1039C0000000190000000000FFFFFFFF40000000A2
-:1039D00040000000400000004000000040000000E7
-:1039E00040000000400000004000000040000000D7
-:1039F00040000000400000004000000040000000C7
-:103A000040000000400000004000000040000000B6
-:103A100040000000400000004000000040000000A6
-:103A20004000000040000000400000004000000096
-:103A30004000000040000000400000004000000086
-:103A400040000000400000004000000000007FF83F
-:103A500000007FF80000050900003500FFFFFFFFB0
-:103A6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF66
-:103A7000FFFFFFFFFFFFFFFFFFFFFFFF4000000012
-:103A80004000000040000000400000004000000036
-:103A90004000000040000000400000004000000026
-:103AA0004000000040000000400000004000000016
-:103AB0004000000040000000400000004000000006
-:103AC00040000000400000004000000040000000F6
-:103AD00040000000400000004000000040000000E6
-:103AE00040000000400000004000000040000000D6
-:103AF00040000000400000004000000000001000F6
-:103B000000002080000031000000418000005200D1
-:103B100000006280000073000000838000009400B9
-:103B20000000A4800000B5000000C5800000D600A1
-:103B30000000E6800000F700000107800001180087
-:103B400000012880000139000001498000015A006D
-:103B500000016A8000017B0000018B8000019C0055
-:103B60000001AC800001BD000001CD800001DE003D
-:103B70000001EE800001FF0000007FF800007FF8E8
-:103B8000000004480000150010000000000028ADEF
-:103B9000000000000001000100070205CCCCCCC1F0
-:103BA000FFFFFFFFFFFFFFFF7058103C0000000009
-:103BB0000000000000000001CCCC0201CCCCCCCC39
-:103BC00000000000FFFFFFFF400000004000000079
-:103BD00040000000400000004000000040000000E5
-:103BE00040000000400000004000000040000000D5
-:103BF00040000000400000004000000040000000C5
-:103C000040000000400000004000000040000000B4
-:103C100040000000400000004000000040000000A4
-:103C20004000000040000000400000004000000094
-:103C30004000000040000000400000004000000084
-:103C40004000000040000000000E01B7011600D641
-:103C50000000FFFF000000000000FFFF0000000068
-:103C60000000FFFF000000000000FFFF0000000058
-:103C70000000FFFF000000000000FFFF0000000048
-:103C80000000FFFF000000000000FFFF0000000038
-:103C90000010000000000000007201BB012300F3CF
-:103CA0000000FFFF000000000000FFFF0000000018
-:103CB0000000FFFF000000000000FFFF0000000008
-:103CC0000000FFFF000000000000FFFF00000000F8
-:103CD0000000FFFF000000000000FFFF00000000E8
-:103CE0000010000000000000FFFFFFF3318FFFFF16
-:103CF0000C30C30CC30C30C3CF3CF300F3CF3CF308
-:103D00000000CF3CCDCDCDCDFFFFFFF130EFFFFF69
-:103D10000C30C30CC30C30C3CF3CF300F3CF3CF3E7
-:103D20000001CF3CCDCDCDCDFFFFFFF6305FFFFFD3
-:103D30000C30C30CC30C30C3CF3CF300F3CF3CF3C7
-:103D40000002CF3CCDCDCDCDFFFFF4061CBFFFFF61
-:103D50000C30C305C30C30C3CF300014F3CF3CF399
-:103D60000004CF3CCDCDCDCDFFFFFFF2304FFFFFA4
-:103D70000C30C30CC30C30C3CF3CF300F3CF3CF387
-:103D80000008CF3CCDCDCDCDFFFFFFFA302FFFFF98
-:103D90000C30C30CC30C30C3CF3CF300F3CF3CF367
-:103DA0000010CF3CCDCDCDCDFFFFFFF731EFFFFFB2
-:103DB0000C30C30CC30C30C3CF3CF300F3CF3CF347
-:103DC0000020CF3CCDCDCDCDFFFFFFF5302FFFFF45
-:103DD0000C30C30CC30C30C3CF3CF300F3CF3CF327
-:103DE0000040CF3CCDCDCDCDFFFFFFF3318FFFFFA6
-:103DF0000C30C30CC30C30C3CF3CF300F3CF3CF307
-:103E00000000CF3CCDCDCDCDFFFFFFF1310FFFFF47
-:103E10000C30C30CC30C30C3CF3CF300F3CF3CF3E6
-:103E20000001CF3CCDCDCDCDFFFFFFF6305FFFFFD2
-:103E30000C30C30CC30C30C3CF3CF300F3CF3CF3C6
-:103E40000002CF3CCDCDCDCDFFFFF4061CBFFFFF60
-:103E50000C30C305C30C30C3CF300014F3CF3CF398
-:103E60000004CF3CCDCDCDCDFFFFFFF2304FFFFFA3
-:103E70000C30C30CC30C30C3CF3CF300F3CF3CF386
-:103E80000008CF3CCDCDCDCDFFFFFFFA302FFFFF97
-:103E90000C30C30CC30C30C3CF3CF300F3CF3CF366
-:103EA0000010CF3CCDCDCDCDFFFFFFF730EFFFFFB2
-:103EB0000C30C30CC30C30C3CF3CF300F3CF3CF346
-:103EC0000020CF3CCDCDCDCDFFFFFFF5304FFFFF24
-:103ED0000C30C30CC30C30C3CF3CF300F3CF3CF326
-:103EE0000040CF3CCDCDCDCDFFFFFFF331EFFFFF45
-:103EF0000C30C30CC30C30C3CF3CF300F3CF3CF306
-:103F00000000CF3CCDCDCDCDFFFFFFF1310FFFFF46
-:103F10000C30C30CC30C30C3CF3CF300F3CF3CF3E5
-:103F20000001CF3CCDCDCDCDFFFFFFF6305FFFFFD1
-:103F30000C30C30CC30C30C3CF3CF300F3CF3CF3C5
-:103F40000002CF3CCDCDCDCDFFFFF4061CBFFFFF5F
-:103F50000C30C305C30C30C3CF300014F3CF3CF397
-:103F60000004CF3CCDCDCDCDFFFFFFF2304FFFFFA2
-:103F70000C30C30CC30C30C3CF3CF300F3CF3CF385
-:103F80000008CF3CCDCDCDCDFFFFFFFA302FFFFF96
-:103F90000C30C30CC30C30C3CF3CF300F3CF3CF365
-:103FA0000010CF3CCDCDCDCDFFFFFF97056FFFFFBC
-:103FB0000C30C30CC30C30C3CF3CC000F3CF3CF378
-:103FC0000020CF3CCDCDCDCDFFFFFFF5310FFFFF62
-:103FD0000C30C30CC30C30C3CF3CF300F3CF3CF325
-:103FE0000040CF3CCDCDCDCDFFFFFFF3320FFFFF23
-:103FF0000C30C30CC30C30C3CF3CF300F3CF3CF305
-:104000000000CF3CCDCDCDCDFFFFFFF1310FFFFF45
-:104010000C30C30CC30C30C3CF3CF300F3CF3CF3E4
-:104020000001CF3CCDCDCDCDFFFFFFF6305FFFFFD0
-:104030000C30C30CC30C30C3CF3CF300F3CF3CF3C4
-:104040000002CF3CCDCDCDCDFFFFF4061CBFFFFF5E
-:104050000C30C305C30C30C3CF300014F3CF3CF396
-:104060000004CF3CCDCDCDCDFFFFFFF2304FFFFFA1
-:104070000C30C30CC30C30C3CF3CF300F3CF3CF384
-:104080000008CF3CCDCDCDCDFFFFFF8A042FFFFF31
-:104090000C30C30CC30C30C3CF3CC000F3CF3CF397
-:1040A0000010CF3CCDCDCDCDFFFFFF9705CFFFFF5B
-:1040B0000C30C30CC30C30C3CF3CC000F3CF3CF377
-:1040C0000020CF3CCDCDCDCDFFFFFFF5310FFFFF61
-:1040D0000C30C30CC30C30C3CF3CF300F3CF3CF324
-:1040E0000040CF3CCDCDCDCDFFFFFFF3300FFFFF24
-:1040F0000C30C30CC30C30C3CF3CF300F3CF3CF304
-:104100000000CF3CCDCDCDCDFFFFFFF1300FFFFF45
-:104110000C30C30CC30C30C3CF3CF300F3CF3CF3E3
-:104120000001CF3CCDCDCDCDFFFFFFF6305FFFFFCF
-:104130000C30C30CC30C30C3CF3CF300F3CF3CF3C3
-:104140000002CF3CCDCDCDCDFFFFF4061CBFFFFF5D
-:104150000C30C305C30C30C3CF300014F3CF3CF395
-:104160000004CF3CCDCDCDCDFFFFFFF2304FFFFFA0
-:104170000C30C30CC30C30C3CF3CF300F3CF3CF383
-:104180000008CF3CCDCDCDCDFFFFFFFA302FFFFF94
-:104190000C30C30CC30C30C3CF3CF300F3CF3CF363
-:1041A0000010CF3CCDCDCDCDFFFFFF97040FFFFF1B
-:1041B0000C30C30CC30C30C3CF3CC000F3CF3CF376
-:1041C0000020CF3CCDCDCDCDFFFFFFF5300FFFFF61
-:1041D0000C30C30CC30C30C3CF3CF300F3CF3CF323
-:1041E0000040CF3CCDCDCDCDFFFFFFFF30CFFFFF57
-:1041F0000C30C30CC30C30C3CF3CF3CCF3CF3CF337
-:104200000000CF3CCDCDCDCDFFFFFFFF30CFFFFF76
-:104210000C30C30CC30C30C3CF3CF3CCF3CF3CF316
-:104220000001CF3CCDCDCDCDFFFFFFFF30CFFFFF55
-:104230000C30C30CC30C30C3CF3CF3CCF3CF3CF3F6
-:104240000002CF3CCDCDCDCDFFFFFFFF30CFFFFF34
-:104250000C30C30CC30C30C3CF3CF3CCF3CF3CF3D6
-:104260000004CF3CCDCDCDCDFFFFFFFF30CFFFFF12
-:104270000C30C30CC30C30C3CF3CF3CCF3CF3CF3B6
-:104280000008CF3CCDCDCDCDFFFFFFFF30CFFFFFEE
-:104290000C30C30CC30C30C3CF3CF3CCF3CF3CF396
-:1042A0000010CF3CCDCDCDCDFFFFFFFF30CFFFFFC6
-:1042B0000C30C30CC30C30C3CF3CF3CCF3CF3CF376
-:1042C0000020CF3CCDCDCDCDFFFFFFFF30CFFFFF96
-:1042D0000C30C30CC30C30C3CF3CF3CCF3CF3CF356
-:1042E0000040CF3CCDCDCDCDFFFFFFFF30CFFFFF56
-:1042F0000C30C30CC30C30C3CF3CF3CCF3CF3CF336
-:104300000000CF3CCDCDCDCDFFFFFFFF30CFFFFF75
-:104310000C30C30CC30C30C3CF3CF3CCF3CF3CF315
-:104320000001CF3CCDCDCDCDFFFFFFFF30CFFFFF54
-:104330000C30C30CC30C30C3CF3CF3CCF3CF3CF3F5
-:104340000002CF3CCDCDCDCDFFFFFFFF30CFFFFF33
-:104350000C30C30CC30C30C3CF3CF3CCF3CF3CF3D5
-:104360000004CF3CCDCDCDCDFFFFFFFF30CFFFFF11
-:104370000C30C30CC30C30C3CF3CF3CCF3CF3CF3B5
-:104380000008CF3CCDCDCDCDFFFFFFFF30CFFFFFED
-:104390000C30C30CC30C30C3CF3CF3CCF3CF3CF395
-:1043A0000010CF3CCDCDCDCDFFFFFFFF30CFFFFFC5
-:1043B0000C30C30CC30C30C3CF3CF3CCF3CF3CF375
-:1043C0000020CF3CCDCDCDCDFFFFFFFF30CFFFFF95
-:1043D0000C30C30CC30C30C3CF3CF3CCF3CF3CF355
-:1043E0000040CF3CCDCDCDCDFFFFFFFF30CFFFFF55
-:1043F0000C30C30CC30C30C3CF3CF3CCF3CF3CF335
-:104400000000CF3CCDCDCDCDFFFFFFFF30CFFFFF74
-:104410000C30C30CC30C30C3CF3CF3CCF3CF3CF314
-:104420000001CF3CCDCDCDCDFFFFFFFF30CFFFFF53
-:104430000C30C30CC30C30C3CF3CF3CCF3CF3CF3F4
-:104440000002CF3CCDCDCDCDFFFFFFFF30CFFFFF32
-:104450000C30C30CC30C30C3CF3CF3CCF3CF3CF3D4
-:104460000004CF3CCDCDCDCDFFFFFFFF30CFFFFF10
-:104470000C30C30CC30C30C3CF3CF3CCF3CF3CF3B4
-:104480000008CF3CCDCDCDCDFFFFFFFF30CFFFFFEC
-:104490000C30C30CC30C30C3CF3CF3CCF3CF3CF394
-:1044A0000010CF3CCDCDCDCDFFFFFFFF30CFFFFFC4
-:1044B0000C30C30CC30C30C3CF3CF3CCF3CF3CF374
-:1044C0000020CF3CCDCDCDCDFFFFFFFF30CFFFFF94
-:1044D0000C30C30CC30C30C3CF3CF3CCF3CF3CF354
-:1044E0000040CF3CCDCDCDCD000C0000000700C07A
-:1044F00000028130000B81580002021000010230DE
-:10450000000F024000010330000C0000000800C052
-:1045100000028140000B816800020220000102407D
-:1045200000070250000202C0000F0000000800F067
-:1045300000028170000B819800020250000102709D
-:10454000000B828000080338001000000008010002
-:1045500000028180000B81A80002026000018280BD
-:10456000000E82980008038000028000000B802863
-:10457000000200E0000101000000811000000118AD
-:10458000CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC6B
-:1045900000002000CCCCCCCCCCCCCCCCCCCCCCCC6B
-:1045A000CCCCCCCC00002000CCCCCCCCCCCCCCCC5B
-:1045B000CCCCCCCCCCCCCCCC00002000000000007B
-:1045C0001F8B080000000000000BFB51CFC0F00360
-:1045D0008A7BD81818F67020F843015F646260B8CF
-:1045E0000CC45781588099812198918121849178B8
-:1045F000FD19A208F63B210606296106860841A09E
-:1046000079C208F1D3403576220C0C8C22107E2B17
-:1046100090E612A58EFB071AEF94C214DB26816088
-:10462000EFC2228F8C77A3C98B4AA2F2F710D03F3A
-:10463000D0F895222A5F5601429741C55FA3C9CBA6
-:1046400041E56F41FDF54611BBB9B7A1F2009CB43D
-:10465000B6A260030000000000000000000000009F
-:104660001F8B080000000000000BED7D0B7854D577
-:10467000B5F03E73CE9C9949662627214F1E6112E4
-:1046800020028638BC0228F73A212140A575A055A2
-:10469000D1A21D3040C85B8A5E5ADB2F130831025D
-:1046A000DAE08F8A16EDF0AAA8A80123450B7478EA
-:1046B0008A5E6F6FB06A69B5DE888A8A3C22AD4A2D
-:1046C000EF6D7FFFB5D6DE3B73CE6402D8AFF7FE49
-:1046D000F7BFDF1F3FBFC33E7B9FBDD75EAFBDD6D9
-:1046E000DA6BEFB1DB1C4CBF96B1AFF00F9EF53625
-:1046F000C65846ECF9A89D7D2FE866AC60BD6F8575
-:104700003B1DDEEFCEDB91EC632C67CF5A650ABC14
-:10471000CFD9D0A6CC2F8C7D1F7041E57878BF7B98
-:10472000AD5202EF735E6B53E6E1D361639DD09EA1
-:1047300069BE14864F16602C93B1211399F80BB8FB
-:10474000738A191B88FF842ECE1BC98C8D632C6F36
-:10475000A52D1256E07DA87226F332B619E0CA499B
-:1047600083EFD4BFECB763DB06ED44979331A7E644
-:10477000D4BECA672C770EB331780E5EC6DFE3DF96
-:1047800057F07F5ED85A1EC24CE53C2C7BD24FC2FC
-:1047900090CCC33C5FA989E0EDD683A362F394CFAC
-:1047A0000D8DBE4CB7D6FBBD7C2EB9E363FD1EF864
-:1047B000FA716C3794B1485CFBDAB0AEB1ABE0098A
-:1047C00008682FECFDFD4C56528C74B88D4DA167D6
-:1047D000BDE6BB09F1527FD4CEC200777DC3C9725A
-:1047E0002CB3DD0A1B96D7FBFB51CC4EF428618A13
-:1047F0007612E7EB655E9C9F5AE37BB81CF0DC9079
-:104800001C28C37E1F490ED153BECF9E3F3D3B04A3
-:10481000F0942E2A0C33A0FBF9F58ADF019F7FA4C8
-:1048200044743BD0A3FA3B0D45D3A0DD9B7AE83A14
-:10483000FC6E911A6DB1C3F8B5731B0A8002AC53BC
-:10484000E7FC337877C9271AD06D3063E19434A43C
-:104850000B63274C74C0BF13C34559ED1B8F977A68
-:1048600056603F1AF612A1F9CAF779E1A34386C64A
-:104870008DC78A091E867032D6A524A2EBE0174B9D
-:104880008E6A457D8FF79F3F8F309743C01DD2B70B
-:10489000D6A34796037E4B5FB047AF057AD46E54DC
-:1048A000220E28DBF6B902489FB35BA00C74897A0C
-:1048B000746A7FC67052B9DED179FF3550EE7E4101
-:1048C000659BB0DBE1493694BB930276360ECA8015
-:1048D0008F852E5EACDDB8FF36ECAF72B783B99032
-:1048E0009E2F2EFAD635505E04FC864D6AB736E907
-:1048F000FDA1BC38A2B463F9DC1446FC114ED323ED
-:104900005B61BC73DECECC1B405E4E353A990F40E6
-:1049100059E1E9CCFC0EF051556447397E57B55D3D
-:10492000F123DA4B5FD87A2407E7F524F015F0512C
-:10493000F5B664E693F883FF4FC254AE85FA25308E
-:104940004F94FF45ACAD9CA938FE5ADDE789E1EBF9
-:1049500054A341E3F4C8D393300E7C57F7ACE2C7BD
-:1049600029D6D95808E5EAEC8BAE399BDD38BF264D
-:10497000BDC083F3BA47C7768B22F376A1CAAA8A51
-:104980006CD4CBA1BE6AC3467D6121E20DF45E21E9
-:10499000C2D5CF0AD77A3580F85D92EADCA4027ED0
-:1049A000983B903D3B01FF9C6A043556102B57A164
-:1049B0007C933E89E8B34CEDCB9554E2D7EA6D2A5F
-:1049C000F359F889D33F7C8CD33FBCD713D99A17BE
-:1049D000A3DF1283EB4949BF25A9829E5A77712232
-:1049E00078EE477A003C6D882F78AE11F07927B3C6
-:1049F000120DE8E20D30436197E6CF363B9BC7606E
-:104A0000ECD7D982803609CA3ABB83F91933B4DAB4
-:104A1000401994FFC282AFE17C18F3FB8280E71655
-:104A200085CDC1791F4660613E2D393AE1AF6D6A8F
-:104A3000F166551130A76379E1CF57E5D1F76FD013
-:104A4000F71A7C3FAAEFEF8DF28996EF8DF24AF9C3
-:104A5000FD3BD88E392FFE7D5BF9D5D6F1CBABE48B
-:104A6000F71FD0F8EE8BC36F4C9B6C1D7F5A0D7DEA
-:104A70005FEFE0F4EA4E75463641B9D9E50F684874
-:104A8000378D45F1BD9656B009DBA9921F58674096
-:104A900085EFDDDB53C7AC6266BE98F2271CCF03FF
-:104AA000D262E68B948949167E4C0DA459CAD093E4
-:104AB00071F2CA981E0A789D048FDE5F277D51D25D
-:104AC000DF49F0DEB5CF45E5BBAEE6F0DED5DF4D24
-:104AD000728630B01C28EBA1AB0CD37A04702A2C60
-:104AE0009BB1CF95904B196F7EEFB3E1FB249535C9
-:104AF000E07C921C8CF4D13D79C59BC326FCB40E9E
-:104B000002FA42395DD1391E055EEF19B4307B9E41
-:104B1000699C9641FA9C4D85FCFDED6E1C2F98A971
-:104B2000A01ED4BB0B0C77EF711CF9132DE3387367
-:104B30002B699CBCB8711CB99571E338E76C12EF16
-:104B4000C538432E36CE3DF9575BE7935B45E314FA
-:104B5000C5CF27B72A6E9C243E1F782FC6F123FEAF
-:104B6000FA9CCF90C9D6F90CAEA171AEC171C69BAB
-:104B7000E633B8266E1C378D83EF711C30A47C2C75
-:104B80000BE8EEE85E48F4FF958BEC05DD117A0248
-:104B9000FB656FBB18E9131F8C9B857A0516679020
-:104BA0005F4D49A371BE4802FABBCD74E6FA889EF8
-:104BB000A07F16081059042002FD532778B462FB29
-:104BC000ACDC267CEE2ECD9E8776C93A8F7F188886
-:104BD000CED9DDA5FAED09EC9B056DF6935D16FEC9
-:104BE000157A6F0A1BDE00E377A0B231954F82FE83
-:104BF00062A0B74E80FEC2E747C23EFD00F41BD361
-:104C0000CDF036D13C4E6A1C8F2737F075E48BB55A
-:104C1000C7EC60ECE1306F1402DC378A692C680362
-:104C2000E3CF2467F5821EDD2F3A229B881E810187
-:104C300036E073B6BE1FE04AB4033BF30FC21E85D5
-:104C4000BF0136B0656F69DD71189BBDA5CC1BB483
-:104C500004E63BA763AD7D0094CFDABB6EF3BB4D9A
-:104C6000FDCCB19FC0793BE13FECE7E690DD629F70
-:104C70007EB7D25ABE35CE5EAD51F2053DC4B8BE48
-:104C8000881DE975632687E7567C8EC16A83E875BF
-:104C90009BC1BF95F0D4DF6D67515A8FBA3258214E
-:104CA000E22383ECA2905C57E2E0BBCDEE0C0481E2
-:104CB0009EB7FD40253CC6C3DBB52F3960037BA9F9
-:104CC0006BFD1FED687F5F0AFEEF2DB3D6B3301F7B
-:104CD0004FE255F2C14D734AFA7D606A77736846B8
-:104CE000BF0F4CFCF2DDCA5996F2AD0D375BDA7F8F
-:104CF0006FD93C4BFDBCF0624BFDEDAD7758CA0B54
-:104D0000DA7E6069BF687D93A57E71E45E4B7DF5B8
-:104D1000B6B596726DFB2396F6F5BB375AEA6DFB76
-:104D2000465C8FF2B8E24D95A17DF6B9FBE4FD68D3
-:104D30005F7D6E687E6C5387BC0672F8716336F1D6
-:104D4000F7A9461F3DCFEE1EEB447BBC3E09E4199C
-:104D5000D6FA7DCA1FC2AD93518F407BD0E1079434
-:104D6000F7C361709E5E517CC4F7EA7A9D45815518
-:104D70001596D6C3D7DD6AAC5EEB82FAB17DD7ABB0
-:104D8000EBB584F55A9796B0DF734A7701DA77E18D
-:104D9000DF3918DA817DD90FF03700D78BBEEA4FA3
-:104DA000DB5865BB49EF9C546CC407372A534EA2AD
-:104DB0007EAED1B9BCD7ECCC9982FE608D1E2D6839
-:104DC000705F64BC7600260BFBC9A7792D8E0C881A
-:104DD000C92FD16F8845EE97B2D087A89F4FEF5764
-:104DE00049CFB2E8C1DC6F8FC2F10327F13DDB9DF3
-:104DF00041EBE35B8D817E1F803F77BC713A3D7F45
-:104E0000DF18ECF701E89A771AE750F9DDC6103D94
-:104E1000BB1A2BE979A2B181EA3F685C46E5938D24
-:104E2000617A7EDCD84ACF538D6D547FBA713D953F
-:104E3000CF3646E8D9E307087B94A50BFB4FD8EBA8
-:104E4000B07250F9BC98830AFFE67EAB3F1BE5FACF
-:104E5000BCFB8B02B473CF1F07C324817F289FF153
-:104E6000FCD637FD02B4DE2F8C00FDC7F6AE7725E9
-:104E700071FAB86C6C3A03FD73EF309D69307ED2E5
-:104E8000AFAE247B19DE6B8CF465C43FCB93A07F5F
-:104E90009C73D6A5E9D4C31F8FFE4731C61F6E147D
-:104EA000FA30E9A0DAC0E9B6D98F7433E18FDB6557
-:104EB0002F087D1E8747B2E5727AE3F34C86C467FC
-:104EC000672EC601D629C11136E083F31D0E9AD78D
-:104ED000F93DC91186DF627064D2C5F0C6E1A8DE73
-:104EE000E632CCFAA1B63DD5B0EA8B1CC3AC2FCECE
-:104EF0001FDDEC45B95F926D333E188BFC1110FC41
-:104F0000C1F94EF65FDB9E67B82DFD58CBE7DB9409
-:104F1000E9E80781724FF94E02FF403E9764EBC605
-:104F20000720DFA7B60D49C171C18F33709CD38DA7
-:104F300086C1C7CD36CC7C59B32C89DA4BF8FAEA56
-:104F4000F7EF0D1F5A06EF3B19A1FEAB215FDFCF34
-:104F500066DA9F289EC3F6D8BFC075C701FF7F459C
-:104F6000F1008DCAB2DFFA7635ECB80ADF6FB78C84
-:104F700007DFF9A40F8DEB55DF74D7D849535CA038
-:104F80000EC720FFC849740E418F29D0DF39CDDD0F
-:104F9000AAC038D36D3EAAAF17FC58EBECD243F051
-:104FA000EA4C07A7475FE39C6A3CEAD3407F543A48
-:104FB000C12383712ADB4794A17E3CD3B122330401
-:104FC0007C5BAD9EBF2B98E0FB569BC2E189D8BBB2
-:104FD000BB4CF3917114C6A05F670C7EE4F493A6FA
-:104FE00072BCBE96CF07B05FE08FBAEDC7CAAF0103
-:104FF000F8EB767FA6231CD36DA1076C19B1F92BB2
-:10500000387FE8A76ADB7B3ACEEF637BB8E0EE8BB4
-:10501000E8A9DE70BAB3296E27E10BB34EB463E69C
-:10502000F7C4157D37BD0DA2F9C93FDBD92A8083AE
-:10503000FD055A41BD5DD456B0A017F135BFA39A06
-:10504000E28B9FD8A4DDD4568CFC7186D9A6E3FCF4
-:10505000CEB0D7BD634DF8EBB071BB9FB5723B26A8
-:105060000CFF213C60CF5AEC9A45EBADE5856C76A0
-:1050700026EA8D85EBEC2C02285A8C7691E40F9869
-:10508000F7161BB77717B18616B4E73407F70FE6A4
-:105090001B4C1B0070D5FEE2B162B4FB7F69B311FB
-:1050A0007D649C61711A87BB2A3DA207A0FEFD8E1C
-:1050B000B1375E83DCE788B4E0BACC52987F2BEB43
-:1050C0008DCFDB5BADF05D0AFE7878195B6E8143B6
-:1050D000F62BE150B729814802BE7B45F29DD023D3
-:1050E00069AAD5CECF8A2BBF6313F14B95A948E7A8
-:1050F0003386336C4BA17A7F14E3233B1DFE1540AE
-:10510000DF3B6DC12ED4CF6017143153BB3B6D21F3
-:105110007A7F5A796D21DAA74C8B16A17F0F6B8AA3
-:1051200086FCA00B7E5093BC45188FF530583F414C
-:105130002E1D081FF4D3E2A99CC98A30FE0A720A08
-:10514000FDDDE72D3FAA40D9E5EE60D89F23DB1AAD
-:105150005F76F9ACE57AFC07D26138A3384EF2707D
-:105160006B3D2C580CF9CDE3B7BEFFF71E3C4589CB
-:105170006FBDC4D2F074BAA32A8CCF266AA7CD76AD
-:10518000739D93C34F7E39B45F2AECF93AE60B5313
-:105190009C389BF3C1D219368267A9C7E70F43BD7C
-:1051A000A20518CA1FC6AACDEB58FD0510B97EA6E8
-:1051B000B2D6AD235FD65FD05804F47D912DE45173
-:1051C000C723FE0264E73A01595F01C89A7BBAC55A
-:1051D000EE6503D3C4FA3AD030CBEB40A4F3F81811
-:1051E0009DA55EB00BBD08FA224BCD403DD85D4E6B
-:1051F0007E09EB223D21DBE9B17603118EBEDAB9DF
-:1052000062EDF212F557FB8B67768501FF55CF3DB6
-:10521000E805E2B34FB4B64C3FBCAFD9BAD28B7CF1
-:10522000FCB116F6E2BC3F89A8D313F1F38DAA2294
-:10523000FCB1805B417F58D0E9D453ABBF8578FF88
-:1052400062ABDDC026F5DB1C510710B1AE6331E760
-:10525000A76D8EF778F99ECF909EF5BBADF256F50F
-:10526000C4839918EF040C71BF9145C97EAEDBF27F
-:105270006139DA23F5AC9BF444FC7738FE85345A67
-:10528000BFE6E929BDEBE5FE4BBDE0FBFA8ED59FFD
-:10529000A95E2C5BE5BB52F823D3544F3AC5952643
-:1052A000B0094837890716E1F6F08A271F2E7A0FD2
-:1052B000E038BDE59FBD8A256EC4F5C3F9F6DB7FF6
-:1052C000F692AF6FBD7E56F8F3B1EF22F49D6F37C3
-:1052D000B7DFD91EFEACB147BDE82FD56CB4FB419A
-:1052E0003259CD339B7FFE28F2F5EF1C1467A87E60
-:1052F000E6F05B5743B97A873D7D269F865BC98C74
-:10530000D1A31EFE5F362686FFAAE70FEBBE51FC37
-:10531000FD8FD26274A8DEB15F67A37AE3ADB47D7E
-:10532000BFDEE54E408FF6F7CAD1DE5EF1E4973A74
-:10533000CAD527FB149695D7FBFBCA8D87C99E4318
-:105340003C11FD047D7AE8D58B4ED16FBD348EDAE9
-:1053500019B87EF545A791B8F665101F3FFB12C638
-:10536000EF7FEFF0E3FC2B9FFDBE17E7F191D6C076
-:10537000F9F9B195990118B7D21ECE34E8C9DF57B3
-:105380003E7E27F1D9A2637766523C8005726CB4E9
-:10539000868673707E0B36DC40F35BC842C46F9523
-:1053A0008FA9C108C6B334367D470279784DC8C38A
-:1053B000479B1CB8F6B08F50C1A27FF8BA4AFB04D5
-:1053C0008CDD41F1863BE53E045B42E5CF9D9C4E82
-:1053D0009B559B8C6F382D7CBAE59E4EA4CFA9417E
-:1053E000812C8C4F021EC2025F0AEA1DF5D8D42C14
-:1053F0004E1FE6D38AC577A0174BF13DB6EFB40731
-:105400005C4596EFC43AC6C75F2AC607B893D01E5C
-:10541000FB2813EC9B04F3FB52957A19EC0D137FD8
-:1054200099E49ACBF9967BB95C4B398FCC9A8EF57F
-:105430007F7A83CB0F7E87EB3AC015CDA2FAFDDFD2
-:1054400051480F385834913C6FB10B79B6D6CBFD2B
-:1054500049805BC3F529C627D07F1AE19FECB4854C
-:10546000EBE03B935EAEC7F1A89D1E7B6F5AD7174A
-:1054700009F97F5915FBA342FED9062EF77DDBBD46
-:1054800061EE1FD8233F7F14E515E413D7999A677F
-:10549000EC419CF7A7DB0FBE750BF0F5A7ED524E64
-:1054A000AD7A335E4E2B778E6789E4F453B79F2530
-:1054B0009453789F504EDD5DC4C7FFD97A53E2ED17
-:1054C0006C9CDE947AB02FFCC5EBC135AA2FA11ECF
-:1054D00084BF3758716FBE93FC26F9ACEAE9DAC194
-:1054E000143792FC28F9AD871F25BFC5CFD38AB7E3
-:1054F000F8FA1785BE9174B62F67610FC64BF7AAED
-:10550000E45F9F03985A80BEE7B6E74530EEBCD211
-:10551000C5E317E78C6E6F1A3C57A6F2727786DEEA
-:1055200082FA41BEEF76F1F8F6B960B737D5E457A5
-:10553000BCB747F5FAA0BE2BC2A627F23740F3123C
-:105540001C5DACAF7A1E0F9EAABA7397A1DFDEA6D0
-:10555000D27E7645D34D5EDC073EB767C84F503FDD
-:105560002D78050C4C80F71CDA812938BD808679AE
-:1055700009B70B7A7FCCC20F4D86F9DDBE87FB0BD6
-:10558000156BE2EC7BF7521DF50DD8F727AC716D6A
-:10559000CE3755A29FCA0DD6FA2AB686E85615C749
-:1055A0004721E1074ED0041F8D66A3851FC6E31770
-:1055B000425F4D550B7F8276C6B9A33CAE787E8F95
-:1055C0004AF83FBF5D8960DC87E2BB9390FEDD3A1D
-:1055D00033F9CBA791DFF4BEE5F8F40B7F28BE1BAF
-:1055E0009AD4EC7ABBE8A7F03CBDEB7705BFC4F2D8
-:1055F0002F7E9BFB36EBDDBE74DF9F69FFF8DC3E40
-:1056000007C1716EDFCBB97763F925871FE13CB71E
-:10561000DC41FB67E17D9EC830AC1F04F4C67573A6
-:10562000EF97455DB4EE34139DE66B7CBFE3FC9EC3
-:10563000FF7857C1FC833D0E1FCEA37E1FCF0BA961
-:105640007FC9457197737BBF2C0EB9FF7EF3A9D339
-:105650005988F8CFC3E6EC447E4DE5FB00F5BF9CCE
-:10566000B4B909F7C33BF6EBB8BF52FAABBF16A10A
-:105670007E39B793DB0967ED5D8FE33E68AD367425
-:10568000B91DE51E6DB6FE6077DA174C091726C204
-:105690000BC7C339C003CE0BF052897AB12F7C34CB
-:1056A0006BDCDFFCEF878FCF6EC3F16BF64C20B95C
-:1056B00089E14509F0F79E8853A1F9F3F7FBBE2C69
-:1056C00042BBE7D3F6265AC72F35EFCDFFE3E6AD51
-:1056D000442F67DE07FE9BF3FF748DAF4BF172D052
-:1056E0009BCF7F7117959FF5F809DECB94FF13FFD1
-:1056F000D3E8BE13E8EEBD34DD15FB7FD7795F8AB2
-:10570000EEAF08BA7B0CCC2B38B7F7AF142F97F35A
-:10571000BFD4BC7DFF8FCE5BDA3FAB6CFEB67C683E
-:10572000BF86453B7D00E7CAE1B3DB30CC046E4267
-:1057300030913D12B473FF4855781C860DE27121FB
-:1057400026FC094A01F3611C6521D9759ABB85ECD9
-:105750004CA6F93B03808F5523E7FB2957838D39EE
-:105760001EC2F2C0C97E8A6FC6F955CD0A0B2860E9
-:10577000EF6923BF7114ED7CFB705BD45144CFF70C
-:10578000F0798F8863D90DDDE24FB8E3FC0197CF44
-:105790005AEF10FD39D998B67CCC53706B4604C6CD
-:1057A0007797B4D17CDCC3186B33ED033A98E97B6F
-:1057B000E8AF1003B026FBF1EBE2AFA9077F633A35
-:1057C0000388BF11368A6B51521FE1C31F59457EB2
-:1057D00026F71F63F86CE9443C6A0CFC3F3E3FF23D
-:1057E0001B99F01735D18536DC167059DB09BFE8F7
-:1057F00092F4E1F4C8AD11F45962A187C47F02BAF2
-:1058000058E821F1FB75E9124F8F78BC7FC7CEE3D2
-:105810006DF174B2E47764703F240A7EC8CBDB3745
-:1058200053BCE3CC53EF7D0BDB57FF52654EE8E7EB
-:10583000EC760F8BA2FC6A111DFDA9AA0E35619CA6
-:1058400057DAE5D5CF7968BCAA9D8EC84CF8BE6AF8
-:10585000D7FB4564372DEF3E3200E3024F299C7E93
-:10586000E1AE22DCB7ABD2B87F10DFDF063B8F0B97
-:105870009C7E31790EC61F946D3C5FB1AAFD26BB9C
-:10588000C3C46FFFCBCEF35EA11DC973F84985D6A3
-:105890009BDEF071BFE0F4930A876FB73D82798F8A
-:1058A00055DB36EA21F42BB77D4671ECD2E79EF149
-:1058B0007691BFA85AFDE76D2AD1139E44BF783F69
-:1058C000B6AEA396FC84BA76E127C6F951D5CFEDE2
-:1058D000DD1506D4543FFF8417E32FA73AB77AC9E2
-:1058E0003FDDC6FD4FCDAD25F64F2FE597B6DF9BCB
-:1058F000D02F3D85FF007F62BF3DCE9FDFD6EFF208
-:10590000F62F9FF9FC718C939EDEF9E9E30877CDC1
-:10591000FFFEE3E368DFB37D2E632BCCB7FEA93730
-:1059200029DE24BF7B5BC8E9D9412C9C03EDCEFE68
-:10593000CE41F92367F77E948BFEDCD91D7FCE44E0
-:10594000BF7EE9DEA95938EFA52F9466B104F22E87
-:105950009FC89791CB8813C6D3E160C741F243CE6D
-:105960001C7790DFD7135F68AFE5F11A9F882B6C27
-:105970004F1C8795FE705DC7FBE53C3E26FCE24B65
-:10598000C511DE003A5E7519F4DA2EE24471F43A7C
-:1059900083FF00BA7C1947AFCF59E86739B80FD9F0
-:1059A000D1AFCF3842F432F024E3BB47EC019B8EF9
-:1059B00072B033B9874E33914ECF7C9E8BF1F08F0E
-:1059C000EDDD64F774EF7518E8DF57EDFD2DC9C5FF
-:1059D000D9178E51FC948938EB59D6F3C7E3628A04
-:1059E00098DF160F8F3F087C637CC2E7A5F7220E75
-:1059F000C1F955C627FA8A4B4CD045DE93883BD770
-:105A00006E795B6771711E6522D2E93D4B7C5CCE7D
-:105A10003BBE3F03F130C11C5F4B1CF7917E738C82
-:105A20004E3CAE26E36767378AB81BBC1F3806FDBD
-:105A3000411EC7A88F28BF6509E450C6D7C6E871C4
-:105A40007218B9BCB8DAA5E0FD5BF1314CE7EB8325
-:105A5000C4CBE9BF24D6C3DFD4B95C4FB78566EAAF
-:105A6000A6FDECEF897D16892F09EF69918777FAFA
-:105A70002995E2412DED07499FC6CB735D1FE720B5
-:105A80006ED379BCB56EF7FE22D43BA70FBC487C21
-:105A900057B7FD3D3D0CFD1CD9F6BCCEED49CEE718
-:105AA000A8A723263D7DFAD9FD453CEEC7F36EE35A
-:105AB000FBAF16FDD7EFB1F65FBFFD334BFFD5E16E
-:105AC00076DAFFBAD438A7B4C04D38DF539D768656
-:105AD000FAEE54BB3A3D92C80ED4ED967DD0966353
-:105AE0003AAD57E35E4FA2FCDCA5C7A6BF9D82FB83
-:105AF00074206668FF763471BEEAF8716000D2A542
-:105B0000E3D82D2AAE1BBB108F263BB8F88D8652EA
-:105B10000FC86BF13BC171C856F17A60C2719B0529
-:105B20006E18270BF57133F483F9F4983F84FBA3C7
-:105B3000AAB77C3AC2A31A36C39570FDE4FDD9DD3D
-:105B4000418676B9DDB0E62B67CF1671B4A8356F04
-:105B50003D5B67C3711F9CD992FCB81FB064446061
-:105B6000F461CCAB5F904D71E29C6FF3EFCE18EE19
-:105B7000B0EDAAD8BE6DF205E81FF3606C91B57365
-:105B8000E1BB64AD5DC17D007832A4CB9DB6D0266B
-:105B90003D03DBE9CC07AAF1715DD128FF429C7B74
-:105BA00091FDC9767DED07CB7348AA807F88D80F19
-:105BB0001EC4BA14DC0FDEE0E1E79106BBD3E9BCFA
-:105BC000D16661B7F970DF15DB3558D7ED4B9E47CD
-:105BD0006AB596D34B4BEE18EC073F58BFAB540356
-:105BE0007D907E53C98E0106EE4BAF2BC5BCFBF4F6
-:105BF000274A46E740798EA3A88CEAFFB564742E45
-:105C000094BFDF3AA98CEAAB15CA0BDCAB77978659
-:105C1000DD31F9CC00E316F32D406E0FA0DC9E09B8
-:105C20009E6EC1DADA1BBED0F9791816C4F90F9A44
-:105C3000C8E73FD0FDCE0E9CEF605B5713F2DFCF7D
-:105C4000F67E998AED7CCCA0791AACD9C07D7978A2
-:105C500035F1AB8BE4FFC4E7C1487E7F2E39F41BDE
-:105C600084E3DEF9C31F2E479D5AE3273E8ADF27D0
-:105C700066463AD1A542D005E1749AF2902BF12400
-:105C800002E99B3203C751C235EA57577E7D784EF1
-:105C90004A7E11E7C04CE7A43E41381F490ED1337C
-:105CA000FE9CD4013DF829F253CEC20BB908BF3C8B
-:105CB000FF54BAC84D7181F37B58C491407EE473A0
-:105CC0005323CBD086F65DFFA623F4671C37FF571E
-:105CD000BE9D47A1BFAB2A743FA6AE5DB56C5C8686
-:105CE0003696F109A13D21E8968DB444F9BA8BF1BD
-:105CF00073390E25807EE3B9EF1BA47F0756CC24B1
-:105D0000FFE25C725E3BE64F9CBB9BE701C00AAFC3
-:105D1000A01C0CDA931245FF07F8F88B383EFEC240
-:105D2000BACE58C73DF7956F7717F56788FEC0D094
-:105D3000C944B9E17FE7546E679F6BF4111C60168C
-:105D4000EEC7F5F472C7CB7658CFE901DEFB3B4CCA
-:105D500078CF75F449BF3C07A71F3DE3E9B7D0D919
-:105D6000908B725C156C2F47D7F4A385771523535E
-:105D7000BFA987AEC0F635733A8FF09CA18602DCCE
-:105D800067EB4D5F7E1E2B73CFBC263BC62B903E30
-:105D9000BEDE74BC6A993F43EB67A1EB5884FFAA4F
-:105DA0003D9FD9107E49CF87459E7FFCF7FFE85085
-:105DB000C4B8354D768C93ECD6C99E8D6F371D0FC8
-:105DC000558D8F958B9CC5346E968DC73B7AB7E702
-:105DD000EB5FAC5F279DCBEA8B1F8B0CDE1FE0FFD8
-:105DE0001B66FC7FAB6FFCCFC276807F7A7E0DFC9A
-:105DF000DF84EDFBC2BFB4A3AB855EA8C67D14E013
-:105E0000A30F03B33387C2F8E5AA9BE460F156956C
-:105E1000E40FDACFCCC98CE991C5931AF6E37C176D
-:105E20003FA610BF568873A69F8ABCFEF87CA88543
-:105E300073C2B4BFD32B2F2A12E7D7C5E5BBD7C790
-:105E4000F87630CF53E3E7B6542117A58B0A53D029
-:105E50001EDA67F7FD2BD9D9AFA86C5302FC6F444B
-:105E60002633D1755083CD9227CB2A522DFD962D06
-:105E70002AA47DEF251EDF45FDAAC1CBACEB765EE3
-:105E8000D87ACE6848ABF59CD1B0B6FE96F657AC42
-:105E9000CFB7D48F888CB4D45FB96D8CA53CAAFDE4
-:105EA0006A4BFBAB764FB1944747BF61693FF6E859
-:105EB0006C4B797CE72D96F6138ECFB7D44FEAAAB8
-:105EC000B2D45FF3F1124BF91FBA7F68B5536C8CF3
-:105ED000F4234B52485F1E6A9C988BF9D86C9C52F5
-:105EE00086F82C15F98487EED06D86179F0536034A
-:105EF000F4D681053369DD3F744766C047CFE200C1
-:105F0000FA354C9D3C2E51BEE6546352AE392FAA51
-:105F1000D469B7E8B7A986B5BCCB21F6FD0673BE38
-:105F2000F9659C7CD91B2647C13264FD170FCDC291
-:105F3000F140CEF6093DB7EFB2F45C6643319641CD
-:105F4000CE0E25923326D6D912C14FF00CE8981FF9
-:105F500059E6A1F538802F7DF43EAC81BC4C71FA36
-:105F6000071EC679D9FCE9C88465738287787F6289
-:105F70005D66C36D5F675D96729E6D13F96B693CDC
-:105F80007FED91050529CC84DF3F386CC28E6EE32E
-:105F90004FE3A8AB276F35DFFCFEE324CD942FA79A
-:105FA0002C9A49F922D97DE8453D3B7FC616D0C7DA
-:105FB0007A8E8F9EF27DCB1C5BC23CB06EA147A552
-:105FC000BD3522666F75233DCE64BFFE10E629D530
-:105FD000CDED267B2BDBD676C7119CD7ABAA885F8D
-:105FE000FAF8F92A61272F98F1C01D47705FFA5F10
-:105FF00086917E92E36C689C3E43339D231FD88735
-:10600000DF74A593C3F378E3F0191594B76DF0F33B
-:10601000A2A2FFDC706D39DACD8345BEE943B6C478
-:10602000F92E6ED14F16921CE135DC24276716BE7F
-:10603000E3D5601E8FC2EAE5C47DDBAB3A8BB91DA8
-:1060400016F0E339D4DCE8AD0F61FBDC6C8DF25D5A
-:10605000E3C7CF9A1B6ACD83F935A7D9FC6E2A779F
-:106060002BD8DEF123C6FA41FBE6FFAD123CCD078B
-:106070002651FE87C3DDC0703F55CEEB60DAA384A6
-:106080001FB52399D64126F6C565BCF5F3EC8A4EBB
-:10609000B4373E5F67A7F13E87391AD0FFE71D2A64
-:1060A000EDBB1E494B8ADAA0ACB67A68FDCE45DB63
-:1060B00013DA2FECF0447C7931BC68EB27D37918E4
-:1060C000C7403EFFE63477C49D47F34EC7794B384F
-:1060D000E5BC07F5E1679608B873AEE839A7C1904B
-:1060E0008F5543A37E17A4F2739891C689825ED61A
-:1060F000F9B464CFBEFE663C3FF486CA3035C4D7DF
-:10610000D546F35F08F3C7786F3C7ECFF8F2BEB098
-:10611000A9046709C2A9AE2FA779503BF8AEF6676C
-:106120000A7B340FF930349DE8DADF46E7027BD989
-:10613000074E2E5F339C3C2F57CF2E98B1A51F3EA4
-:1061400087925C7CD3D9E7BA1F74727D44CFAF715C
-:10615000BF00ADFF521FA9019BB073B95EEAB19FAA
-:10616000F4D0779D19B1B29AF2A322ECB76FFB6C11
-:10617000C77E1DED333723FB59EACDBEEC33B4CBDC
-:1061800090DFA45DB6386E9E30BF1A31BF9A44F3DB
-:10619000EBA56F6F699076CD12E745ECCA0C3DB167
-:1061A0003E7A52D0A1DED019C59B688D02BDB3D80E
-:1061B00046E78D99167199CF976F704ABB6ECF7E67
-:1061C0001DF10CF3463C6783FF5C4E7AC79E302F6F
-:1061D000FC52FE48FEEAC29D47B13FB07311FAF38C
-:1061E0006DBE94B48BD817F665AFBACC787DC02954
-:1061F000F2B963787C50E0F1C184784C073CDA2C2A
-:10620000F6E1AE021FE1F1A7CE8BD88767BEFD6E27
-:1062100031AE476705BEEA7AFC5CAE9FFBC32285C0
-:10622000F1AA5ACC5F76F232EE07ADC0263998DF7C
-:106230001C7C02FBAFDF6D3D77F863278F9331370E
-:106240003F372BFBCB14FA1EFCEA7FFCD0477AFFCA
-:106250009F703E31FFBAAB18FDAB152F5C91827673
-:1062600059D9AE9B0D7C9E4F1F4AEBD9995D8E008C
-:10627000C279268DE7EB9DD935E108C61F3E6D3CFE
-:106280009A6FD6F7679E3D566C877ECEEC3C56AC37
-:10629000517E70C46217D67EF59B623C8725F3AAB7
-:1062A0007BF8C5C9D789752E1ED7C8C8D45B305FA7
-:1062B000FC42522AE1EBC14CDBFD89E235A83E6984
-:1062C000DFDEA3D33EE59211BE156E8CD7E41994A0
-:1062D00087BB4209E42CC07D96594E3FEE03A4E7EC
-:1062E000B3E1792988C21073033E1D87DAE8B869E3
-:1062F00052A7B11FCD2319C7D14AB9BEEDBE41A7E0
-:10630000BCB164CDF7F05C2867CFD168BD93711D37
-:1063100047323F972CE33A3DF0BC62A77568495E6F
-:10632000A8AD04BE5B32298DBEF3CE7A8BF8E59C16
-:10633000CF16B6E37CB46E8AEFFCA47178C650C069
-:10634000A391639B4136CD5F005BA6FC7FAFC6C2C5
-:106350002960DFAC06FE1F0AFCDFD1E8A4F62D6041
-:106360001F1A69744F42EC9E0F93DCEC6C34A8DD6D
-:10637000CF1BB3E9BB071A7DF4ECB12318FF8ECA1B
-:1063800009F4EB7FD6F3BE467E9F882CFF711CD8A4
-:106390006940EFF4094055C04BBA387F2EEB1F6DB2
-:1063A0007C6548D950810CC067FF1A63E3AA8BC093
-:1063B0009BEE88A4E211E32B5D2C5C3611F3FCBA52
-:1063C000EF2F4FC5F311F794958D003CE2FEF6D503
-:1063D000402AD703CD783E35A7C6D78471BF9CDD50
-:1063E0004A3BAE5F39BBD796E03E02B4A37383B29B
-:1063F000DF0C17D773C9071F51F247E1E602DF9799
-:10640000677B932389CE978E73713DE777F1FDC14A
-:10641000D5625FBD7B969BF462F24117F14BCE9E35
-:106420002B697FCFDDC7BE727C3FC907FF4C71600F
-:10643000B7D2B61FF729D9026E7F4A7EEAEB3B6CD2
-:10644000AF5F46FB737E8DE2C260F6D2FCCECC1A03
-:1064500048F8C6F6663D7E4E4F6C9705049E56DAA8
-:1064600013C7E935C6C719D7D94DFB99786F13E221
-:106470003BE78D3605FDF5330ACFC7E80FF8D8099D
-:10648000E59CC96D74AFD373CE50B90BBEFB93714D
-:10649000BC602580E32AFC7D2E7E27F1A116E94E03
-:1064A000D427397BDEE3E77C6C5D3AE6BF2DBAF793
-:1064B000798A3FAA7A308F9757AEC4F8648637B886
-:1064C00011F984859F2F3B047CF2A038B78C6F5064
-:1064D000EFAD768972B8BD39007CB2DACECB8BEEE7
-:1064E0007D8EF866B53DB818CF3D63B919FA5F9D4A
-:1064F000DA9E6D83B2BBE999E6A383B02CDB3FD370
-:106500001C9E0C76A84BEAE7600EE2BDA76C4079B2
-:1065100094A9ACF13273F2A79C5FEDC13F1F190043
-:10652000FC52B787DF73D383B7DD6B155C8F7EDEDC
-:1065300078D4D7AC093991FA03D6F92BB219F929D5
-:106540007A4489E42B78DF476BA6395FE5BBC98ABB
-:10655000885BC0F7E6F863DCB9363A2A83EB73331D
-:10656000CF0B89A7EB9B49256D4919781E35B44A95
-:10657000453DF88CDDA0BCFA2E8DF4F6699957DF05
-:1065800060277BB0469C73B52F0FAD1A817271AB3B
-:10659000E6C7F842755E5B09DA43D52FE6F99B58EA
-:1065A0002C4FB73AB53D738C3B96A72BCB2B445C55
-:1065B0002A2BB52135B510F763D6E6E27E491D6B6F
-:1065C000BBED8708EF6B2A437EFF64FFA414BC7702
-:1065D000A816CA1807ABED38A687A0DDD549FCBEC2
-:1065E0009BBA0EE01B37BF872650C0D846CD484225
-:1065F0003DFFF340C348348937BB7E5DE6FA07C6EA
-:106600009EC80F1848E75FDD7BBCD98965DD18C1DE
-:106610004663F9DF9A91CFAA47DB28CF9285FFED39
-:106620005060A8D8EF8572AB6BD05473DC3B479CAD
-:1066300033ACDFE0A6F360B02E6F42FEAE5B6F0BB3
-:10664000E3FE99CDD949E7807EE562823ED6F353D9
-:10665000EB14AE0FC30B783C75E98CB46FD0F9A97D
-:1066600095F946F82271DDCA0B49744E4A96AF4E31
-:10667000F251FF955A98F6912A2F78E97CD5DF6F71
-:106680003CA7E5BC56EFF1DC048F1CAF26361ED1CB
-:10669000F5E098571F1A0A745BBAC36E7398F86EC8
-:1066A000E90EB13FEF0A64613F193AC733437F10E7
-:1066B000788DEEB8E1E5B0960DFA5FCA77F87C7395
-:1066C000D964A45BAC9E59E53F80FEF87D49B2FCDD
-:1066D0001FCD650313B44F8A6B9F2FFB575762FF83
-:1066E000F1F06424C5CA4E68AFFDD5D15346F8D643
-:1066F000DAE2FA4B9365F74A1C5FF255EBBDE98786
-:10670000C3C057F7A5B695A0FEEF5EC07C788F1684
-:10671000F2ABDFA46F5B5D5CAE2B2FE45BE81DC3C7
-:106720007B81852E1F35665BF63D17CD5D4AFBB339
-:10673000AD2E412F16E6E76C360C6011533CE8FF96
-:10674000C3F1B7C271751F70FCE37F311C3ECB787B
-:106750003138865AE0FB5BE1D87463C137F2A0C9D7
-:10676000834AD8998FEBC28F795E9C9A5AE66BC2A6
-:106770007D991F6B14D71FC678BE4BBEC68E6A6349
-:10678000507EDA02180761CBB9BD02EF5BED63689A
-:106790001D227F61C81EC73CCCDBC8AF0C2CC627AE
-:1067A0001B5848FB3E729F948938A1DCE71966B0FC
-:1067B00012BCF7EF44D23C5AA7F28373AB31AEAEB2
-:1067C0007AC625E17AF8A02D12C6F1C20FF0F13297
-:1067D0006C917627DA4BDEA106AE77195EAEFFD854
-:1067E000AA425AFF36D9F247DE0170AC544A925E93
-:1067F000413CA7E6537C1CDFE33D3B9BC4BAA5A606
-:10680000FA0D5CA73689756B85D0EFF27D725A70F0
-:106810001EDA113F59356DAA7312EAA1406B3F5839
-:106820006FEE5F356D65F6245C6F7CF94E585FEE58
-:106830004F9AB6D20993D9D4E4EB6FA4C6CAC3FE6B
-:106840000AAB35E989692B03A0779ADD4BAAD0CE34
-:1068500081FAC3E8273E9126F50EAFCF977A0AF565
-:1068600012E831B5A9A71C46BD94DFA377A691DE37
-:10687000D9F2B84AE5A5301EDA31308F30DE0FD6B6
-:106880003D4C23FFC805B02441D935229FF6CF6087
-:10689000DE2C09FDFF11BC5EEE77E8C36CB4DF812E
-:1068A000ED118FAE1CDE5E9FC5CF4BEB1E37F96D31
-:1068B00072FF4415FB7749224F453166911FEC5C0E
-:1068C000336609FA51CEA1D6FD693D2E9F458DCF85
-:1068D0006F7147C9EE6A4B12F1EB7E2C9BEE4D10A7
-:1068E000EFC1521E83CFCC9B9B4BE83E3D0F333014
-:1068F0009F3A3B1465667B493E1DB08EFA4C72E3AD
-:1069000070B340A27C8A85C9DC1E765FD0B89FA890
-:10691000807D83EBA847D8E1C23EB2CB7B8EE2D626
-:106920005D692FD9C57D7A4B674CC9C27349AA3BB3
-:10693000E0443B67BF3186F66954E6BFBEC464EFEE
-:10694000344767507C5233020CED9C57859DA31A47
-:106950007E66B6735A1AC10187B56A737101DD5F2D
-:10696000F3A82BEA1C82F47DD0E647BD71704C552C
-:1069700058C1F8E4324672BAB938730AEE336CD4AF
-:106980008229B7A2BCBC01E3F938DDF83EF70A055D
-:10699000E3E99F3B8329A80FEE4B65163FEAFA64B3
-:1069A000EE8F6C4DE2FA47FA092D004F14E0D02E1D
-:1069B0008CA4FB7C460BBB549F5B46F1324C03C25C
-:1069C000F8A78335840D77ECBE3A47B6CD92FFA881
-:1069D0005D28A278E2D6243E8E1CF71E71DFA02C23
-:1069E0003B59038F1B038F27F2DF6A059C0EB0878C
-:1069F0007C649FC4EDFFF7B68FC85E91F4E9B15394
-:106A0000147E2EB42FFBA8FE82CDA26763E7D97552
-:106A1000D2CB67C57D01320FC42DF4594B76A8ED5A
-:106A20009ABCD8FD009AC8075923EE0560D95AB719
-:106A3000F91C7E32C663A0BE59E48524C79DEB775E
-:106A4000B99792BFE01AAE59CE81395988BE73F812
-:106A5000ACEFB5ECF8FB02C23D796094B7A8B14742
-:106A600014BA1C80DBBB03441ED699E47729DE08E8
-:106A7000F6EE4127ED4BF073A2321EF675EDE357AB
-:106A8000D1AE22BF70FA68EC7711AE4718CF66C15D
-:106A90001CBEE9D8CE286F28C9DFC5F89D63646F96
-:106AA000A952CF859F6F463F2AC36CDF99ECB52B67
-:106AB000573FDFDC5C487E079517DDDB467A70A523
-:106AC0004B96575319D6AB28FA3D6C97C387FC04F5
-:106AD000DF07506ED88D05642FABF9E0D202DC657C
-:106AE00078FF21EE0FEC726C427B16FCDAF92E5324
-:106AF0009CEC8CE7782E2B4CD85FD8D25FEED7EB8E
-:106B00000FC6EFC03C23595FE65D1F55F9773EFC89
-:106B10008E0DEC7C370CFD3FF88283EE2591F72C2F
-:106B2000C7F3EB9464EEBFA3DE30E773EA732B0286
-:106B3000C89C523E1DD949963C7029AFDA85E124A4
-:106B40009FF2BB5793F8FEB1A60528AEA65D282498
-:106B5000F9DF2AE8DAD2685C629CB43EC61943FDCC
-:106B6000F43D4EB1D0134CEC8F6986F91E99BEE40A
-:106B7000357E3F305EBFC9A7D46FFB44FFF392ADB3
-:106B8000F1E5AAF5ED4790857E680B55248FC7BCCB
-:106B9000AF77BCB814D7D8A245286F77F67E5F8749
-:106BA00093FBBE8813146CBBE300B26B4372684363
-:106BB0001294AB92C53E4036AC6B2AAE5B3C6FE99B
-:106BC00011ACC7FC8690EFE1A9A8A7669553FCFA23
-:106BD000B9E4E06FF0BB7B671753AC40C2BDBA911C
-:106BE000E7DB497DE9467C417B87D6C0E39EEE40EA
-:106BF00014ED8B0792DF9CAA211F6A5C0E96AD3EB6
-:106C0000B012E3224ECD4F7CE574DB7CB8BE3BC1B5
-:106C1000BFC375AFC96DA378D20ABC07380FCF1BAD
-:106C2000CC34505E9778F2B3D845F4A3762153E87C
-:106C30005FEBBD3A7FFF71D2E9FB5EF7F71C9C1456
-:106C4000C5FE343FA3FC1944C2FB26BD2AD7F5F884
-:106C5000EFE2FB97F894F8756821C2AB8E76430299
-:106C6000B89E4CB6EEDB6649FD99FA564114DED665
-:106C70002A5D5EB44F402F3E897C5237AAFBD78AEB
-:106C80008FF46926B767C2F2BE02CBFD48322EAF41
-:106C9000BAB95D23E15FF2CA834EF3BE533CBCF147
-:106CA000EBA5BBD09A9FE11C9814775F70131F4728
-:106CB0000B12DFD827079C28274DC61803ED9566D1
-:106CC000CDF7DB00E595D8C96E063BDC32BE7CDE35
-:106CD00027EE073E26ECA8F87A8FB84F39FEFD67FD
-:106CE000C27EB86FFFCDA487FBA21F1EA846FA7A0A
-:106CF000F29981E773EC025EEF25FAED8B8FEEDF00
-:106D0000CFE3BADA4467045DACF8F1547B3080E736
-:106D1000C9D4D18CEC5D75101F1F6869605CD83BCD
-:106D20002E8D0D37ADB3F70E9DCDEF77CE30E87CCD
-:106D30009FEAB10513D999124F8792E53D159C6FD3
-:106D4000B225DF0CFB3DDD836EE29BEE447C7328B5
-:106D500099EB2B84C34CCF7B87E66725A24F4C2F42
-:106D600072BEBA145F7488FB126B1137E0DFD488EF
-:106D7000F3F6A7C53D41F393C57D4106B78BE5FD0D
-:106D8000171D5A2019EDAAF93DFBD4013A9752E399
-:106D90000AA44C42BE3CC6EDDE8F4AF8BD651FD941
-:106DA000032988E78F8EA94A13EDF3F3BC40996756
-:106DB000F591DDB77A24D4DFFE5335D044D5567B28
-:106DC000EE340B8CFD17B46F77ABB47F94F7C03CF7
-:106DD0007514B4AF00430FF9687EA93B8CEB6FC705
-:106DE000EF1BDE453D74FBE30EDF7218E7D0FAB10E
-:106DF0005F60F9E41A8FCF4171B27C05EF155FBA7D
-:106E000036CFA0FDA3654CD81943CB4B8732F6147F
-:106E1000FE53C69D9D74CFB8A80FB694C1FC4666BC
-:106E200074D8DC0053C41D6CC1734E2B9B82D9E80F
-:106E3000FF5DBFA6A005E38F999981CE6B411FAF7F
-:106E40005833BC1CFDC18E47457FE1112DE8EFFD95
-:106E5000D216CA53A0FEA93553CA292F7788ECFF52
-:106E600046AA9FFFB32BBE386E204E2BCB31665601
-:106E70003C57C2535B5E0ABA7DC164595EA2633956
-:106E80003D9959E260F6983F4971B68E1EFFF1AE0A
-:106E9000728C83DD3EA5A15483FEF33C3F6A290436
-:106EA000D198D0566204F0CA5CCF03E5C919786B5B
-:106EB0005EA01AD793919E75E5389FF47ED6FED3D7
-:106EC00055114F65EB5BB0BF1EF8C2DB5A30BE2ACE
-:106ED000DBBF7EDF5B2DE18131BEFF56EC7EA56F0F
-:106EE000BA33E8DEBA231862CB5DD6ADF37C5E918F
-:106EF0007F33B0AB88E71589F2F02E9E772DCBD982
-:106F0000BCDCB13CF13AFF132F97B78EA4C4F53F18
-:106F100076737D0170939E4F39CE02DB13C8518585
-:106F2000DB4DED0E839DE74C8BC9D3F50EC6266273
-:106F30007E9393C329FB89FFFE6E310E0B5F9F8604
-:106F40007C3C53F0F910BFC2F394762747F0F71852
-:106F5000C0CBD2BE0DF3D926E211DB5CEC7BB36073
-:106F6000E8CC2416C27B7332FA41B990BE0FEC70A4
-:106F7000C7FA7B8D8B309B3A24B805FB9B9A9533DF
-:106F80007A455EAC1F80BBD939C602B736310DEBEE
-:106F9000C3FD314ED283CF423E0FE013C2170CF334
-:106FA00034FE7E4047E7C87CD4BF2331E9C6A4E75E
-:106FB0008B3B67D3799AA55EB13FE2E3DF6794F23A
-:106FC000BC97EE1793F9FD99CECE02F37ED6C36E31
-:106FD000916770CFCC87E91C74A79DD1F9851D25D9
-:106FE00017CD3BACC1B89CC96EACD1A2E48FD560C3
-:106FF0005C6E2CF6F71A9D3FC47E7C22FE8C71B528
-:107000008C1589E92FD7C19A0B060BF7EBAD2F63CF
-:10701000FDA7B3F0D84BCF2BD69FD56FECDD9F2EBD
-:10702000E2F802EF9AC0BB9E18CE7D924F01DF3688
-:10703000137F2D10FC26F703CFEE1AB1C9BCFF2A2F
-:10704000CF0D817E7E1A7F1F21DC9944FE4AB11646
-:10705000B80EDB1777A6D1FE80E40FC91792AE1DDC
-:10706000690D146FE97E44A1735CF1701D9670ADDB
-:10707000E7F7F665CD0DA9E67BC6A53C40FF1DA24E
-:10708000FF7113497E1EE3F20072732BCA2FDEC319
-:1070900082F3F07715997F8F40C25F84BC389EE8F9
-:1070A000C8F1FF824BE4AF70BCF5C67FFF4BD03315
-:1070B00097E859DC7980E659D387DC5679BD3C8F57
-:1070C000ED78D4EB83766304FF77B4BF4FF78A750E
-:1070D000EC5699E2E3F346BD55DCA38FC7BF3C05F0
-:1070E000F471564F19F4A50FE9D0A33FA34E67AC36
-:1070F000FD77BDE3A735A3BE14F7F6A6AB7834370A
-:1071000006C79FDCDCBE9A184A1CC76AF07A2C7A44
-:10711000EC916553D8FB30FFABDD3CFF6A625798BA
-:107120007E5747CA75BC9EEAE7E174343CFF97F48A
-:1071300094EB127ACA25F5147F7F186DDE31B8BE44
-:10714000761529603757D80299E87F7D70EC8774EF
-:107150003E6591C8CF1985F939B86E1E0FD2BAF2C3
-:107160000956F23C9D819E0CCCD7B6E6E9B02DFCC9
-:107170005C6B3C5FC5F8282CEC370187580FAE7765
-:10718000743DCBE3195679966580B3CE36C454EF7F
-:10719000E6EB96A403D0BB99EE3916727C6257D603
-:1071A00046D4B7AF7B789E4DFA90C0689CBF944B95
-:1071B0005857059FD8BE37DBCDF5C6EC04FC3BD94C
-:1071C000C3F5EC82F59C6F3AFEBDF43AC47BC7EB85
-:1071D00069A9CB4D7AA24CC8B1EC57EA21F99DAC14
-:1071E0009F22FA9BE6E17251E6E67C877024CA276B
-:1071F0002833ADAFC43FAD9C7F60BE61337FBF2EEF
-:10720000FA8DE153ACAB02CFB53AE017F0B7CD1E23
-:10721000EE8FF949C59D36EAAF62B787F2322BDAB5
-:10722000391E2BDAF6DBAA4DF889EF6FA987CBD18F
-:1072300046710FED611BF01BE2DDCDE13BBB2B87FF
-:10724000F4E7220FB71B2EBD6E5C9E9ED928F2314B
-:1072500080BE94BF58FBD2808D563DCDFB4BEF17BF
-:107260005A81E7F0D21F667ECC29033C45F1DCFF52
-:10727000171EA177F4808EE76DBB1F61B41F3F6CB2
-:107280006E60B40FCAF541F71805FA2B68E37AB8B7
-:10729000781DD83128774EB92EBCB2DD3CDEDD1E1C
-:1072A0008FE51C61C57A8EBF6160FF3C8D4FE8E7BA
-:1072B00059B2E3393C271E6ABF06E34EF2FB564142
-:1072C000FF4BC1578CF08D8BC187FD53FE8A3BB8B5
-:1072D0001CFBADFBCDCE01E67E1FECE977FE14175B
-:1072E000EAF9B5B0EE9074860EE2B98B8A3DA90634
-:1072F000DE9300F26C437F478E5BA1C9DFCBE92AA6
-:10730000C67BC20B7AC69174FDDD33E6F96FF6B821
-:10731000FFAEF4EDD043349FEE1D00AF2F86978E65
-:10732000F679CB5DB84E1C677E5C2724BCC3E6763D
-:1073300079315FA45EAC1F305F1BFA2FE93FF5B1D6
-:107340001588B7CE29744F423C5F4B3A0D675C7E7F
-:10735000A49F361C03FC50DEE32912FA87919F7B21
-:10736000E2A5BD4FF37B2D385DEAE7723A767942AC
-:107370005F7832627208FA9CEE2FAE58D7A38FDA8C
-:10738000F9FBCEDCB980CF5F7BA49C5BE9921E6CDD
-:1073900077D125B382AFCFBC382AB28AD399C6EF52
-:1073A00068F7441405CFD13634A1BF2DF504C2636C
-:1073B000CE5792F0F4D091011D47C5DE0F9BCBFB59
-:1073C000AB0779473EAA511B941C85F400C557B3FF
-:1073D000500F4039AB9DB7637BF8FD0D124F353729
-:1073E00041A7E077FE9BA790E621F19535376AAB80
-:1073F00029C47CE503833F30D1F9A8D82F40BCCC09
-:10740000267F83EBEB1A353810FD5696E5A073A85E
-:10741000B00E917E39EC629A0BFA7B199EB82E4D14
-:1074200055EFA0734253872824C7A00164BC877E10
-:107430008FEBFA6B9379DED65FBE3F14E79991CC60
-:10744000F910FA718A7E9CB40E8AF5E05F73C1AEC2
-:1074500053627AF9B0A2503F87FFE1CA4D2B9418CE
-:107460005F627F683F1D56660DA4F5B22343240773
-:107470007559F2C97AAF675DB9586FF617D1BF8BEE
-:10748000F99BCA3DD380A7264C6F8FE295D34D61FF
-:1074900075DA3FC1B853C1DF74A1FEF472BE3E9CE1
-:1074A0001756BD08D73085EE573E92142AE4F7F4FC
-:1074B000F2713245DC2653E42BA3BD80CF8897EBD5
-:1074C000FF9129FCF903F1CCF4268EF3AC13F5F50A
-:1074D000E25EEB552589F3D9067A154BBCE57AB106
-:1074E0006F81F7FF7AB9DF29F26CF93E07D8F7848C
-:1074F000DFD27BE6D2BEDDE79D37A4F0FB1BB83EB2
-:10750000F85009FCFA26059F41BA3F2FFCA64AF91C
-:10751000EF1F18012FE637D52625CEC32E11F3AB6A
-:1075200015F3FFA891DFB7B000F7D3407F8CF5F2D9
-:10753000792C6AFB7639D27BD13A85F6D3E4BEBD8D
-:10754000A46FE506D5124F5F80FB69FDFE163FCAAA
-:10755000DF871F35CEE247C971E3FDA9138DD996A8
-:10756000B8FFFCB621E29E0BDEFE76E627B86F6F11
-:107570001D60D9FF63AD1997770F28F84FE184F0AC
-:10758000E9A46FE5FB138D4E1636C3F1F150CA7BAB
-:1075900018E80DDD8CF48DC191CCC26638D864FE3C
-:1075A000BB572E1E77053B9CFB2FF0DCE8263B9D4E
-:1075B000EEA9ED898381FE3052501F95CCF38E8F5A
-:1075C000F90D52BE6A2627F61FC6093F779C9BFB22
-:1075D000C729C7A53F9DE443BD28EDF1F8EF1A7A0E
-:1075E000F8D66A4F5E2AFE00FC1B36FB47F1FDB65B
-:1075F000887EBF3EBFE4F7C12F05FF257E77F1E40B
-:1076000010C5F7F0F221CC45995066F5831EF5F2CE
-:10761000F5FC516F327D2FEDEA8AB9D6768F63BBC8
-:10762000F1F84CBEAC788ED97E5786A0FEE3FDC93A
-:10763000DFDDC93BF53AE57FFE0EFD44E8EF584A31
-:10764000602BF2C71A912FBFF1AF07B36F477BE8EA
-:107650005FECB45F5FF2D8D21598CFEC6E570C3A5E
-:107660007FB4DB2A0FDF5CD63EB802F0D12EE8549F
-:10767000E3E7F3A8F147F5A16ECCAFE6E30F6CDFCB
-:10768000AF68267E1B58C9DBBDE4B55BE233FBB0B7
-:107690000CFDECF11AD26FD93F231DDB0734B40384
-:1076A000FAE3EFDD003CFD1B18D9D1FDC729D4FF5B
-:1076B00037C76D54F0F7B7E43C5B6DB30A0DF8AE15
-:1076C0003533D98FEBCD00237408E5ABE69D681404
-:1076D00097C709EF746AE85F8D320287F1BD9C9706
-:1076E0004F35FAA3DD9EFC0E87AFAD27AEC4D71B86
-:1076F000C6560B3B7413B7C7547694717B9CD6F572
-:10770000CCE5C369DD93F3C94C13EB46260B61FE50
-:1077100031B46F253BC5C9D7FDCCE5FCF7F2243D5C
-:10772000637EE68831E8670E5913D5E6C3772F6D7F
-:10773000B025BC5FE37D817798C7BBE6795C4A5F83
-:10774000C976F63EE28C92DF93A727F6DF19BB9F3E
-:10775000EA4B1E4BBF85E4B259A7FB1025FE471923
-:10776000C1CF109EFEED1B15C4CD0991577062D597
-:10777000D30ADA91DF5FCC0C35013FF5C8EBB29D3F
-:10778000832B4C7A13FA277A6C8CCB1397F116570C
-:107790000AF77FE61B4196329EF276C97F5EBC8572
-:1077A000FFEE469FF8B84C7C2995DC2EAF99C37F3D
-:1077B00077B4E4318DE85DDDCC7F77B066FB0E3ABF
-:1077C00067C77EC4FC28EF35ED3B940A18B77AFBF7
-:1077D0000E6581097F036A22945F7D8547EE3B44F5
-:1077E000C96E8EE76B8C17A09D72C4C5E5FD7489C8
-:1077F0003B8CFB10A7EDA11A6C773A27D98FFB942D
-:1078000012DF2FEF9846F71D78763AA2F86CB56D27
-:10781000CA7642BBD691BA1FF96894111A86784984
-:10782000D3821DF87D6ABAC78FFB183E071B43EB56
-:10783000F565E261421C3F4CF81197939B52BC42A4
-:107840002E18E53D5D9BE291F613E9A723763E8F66
-:107850009D8CC31BF106C6A5201F1EE5BF9BD0BF94
-:1078600026AA60BE48FCB8317E0A5C8DF05F3E9C63
-:10787000ED3AEAF56AA1674A1EDBA2BC6F827B067D
-:107880001A55C89FDB372A1827837AD233D09E61D6
-:107890005E52FFEDDC2FAD86FA0526BD22E7914052
-:1078A000BF04713EEE773A0F71FD12E5FB0202DE76
-:1078B000787ACE4DF1D1F8E5601ED07B3D3C1CFDC1
-:1078C000E223F949D49F94F778F99C2BF8BCFF8602
-:1078D0002D8ACD4DFB2764474AF864BB6329534288
-:1078E00088AF09D33B090FB51B349ACF543D38F408
-:1078F0000E933CD4A5703BEEC04DEFD2FD3FEB7E26
-:10790000718CF8B116FC69F227DA8EE937E0BA1209
-:107910007E52C5FDAEEBB849C21E12F7625DD7C1FB
-:10792000F56F6DC70E0DEF91947C9A77EA00DDA795
-:1079300055DBEE60E84701FF2D45FCC4F3A9C48F79
-:10794000D4AF7DD113F410F793C2BA88E785F2D093
-:10795000CF91FA3922EC51E6E6EFD78A79C5F827BC
-:10796000D49262D1AF2E928BBC53630E605E66AD33
-:107970005FA1F392E9A5E277C84C7099FDBE78FD4E
-:107980008871C320F7E373679BCEA9F5E879F1FD11
-:107990003AA4377F1FE5EF593EAED712FE78FA457D
-:1079A00053B85E4FC0678FE13CE2D731B9AEE73DD7
-:1079B000BE53C3FB9224FF5C877437F1CFF6147E6D
-:1079C000EFEEF6148DFA7FA884EF3B3E64E7EBD729
-:1079D000434D4ECAA37CF9669ED7E5B9458FE2F3C5
-:1079E000B06D7E0DD61FEECFE168B52DA773772061
-:1079F00097CF205D0FDCE4655C3F727DB8EE79AE19
-:107A0000CF6AC26EF2736B42DFA9A07CD774979FD6
-:107A1000EE010D1DD26FF0F4E62BDFCEFDF4FBC7B7
-:107A2000D7B573F99374007D4AFC25E541E23586AC
-:107A30004F8E77294F921E11B9CF03FCC2ED23EE72
-:107A400057158A739195CEC011BB0FFD161E7F2D61
-:107A500014E72365FC75BEA04B912DF81ACEB357E1
-:107A6000FCF532FD83EA65AF8EC0DF0FABCA3E4A3C
-:107A70004F29B7E0BF5AE4FB6D41F703C25F3C21D9
-:107A8000F444F5B87692CBEA0F1A489EDDD3B95E7E
-:107A900073BF63D5C78CDD27E6BB86BE9B9ADC5ED1
-:107AA0008EFBC7537FA618E8D7F705E7223C2F8641
-:107AB0007EDE8683DE79885FF13B52F25CCD1F85E6
-:107AC000DE39BD4D15BFABD9A05FCCFEBE547F2CB7
-:107AD000FA8642F79A08DFF0F4F6D2491FA27FBA7D
-:107AE0002D857EE7E4D3EDDFFEC187E9F83B22D7A1
-:107AF000FAD14E485F1124FEE9CE70F937F178ECE7
-:107B0000748C5735B51FF4E2399C4F9EBE6A0CEA5F
-:107B1000ED2483CBFDA9E7D5658897FF0324F17B8E
-:107B20003E008000000000001F8B080000000000E5
-:107B3000000BD57D097854D5D9F0B973670B9949F5
-:107B400066924C36B24C02045412262161916D9219
-:107B50001016599CB014906D640901421220ED87F3
-:107B6000D57E190CA5C823355A1770EB049762B55A
-:107B70003568B441830E0808553F47848A15EC8860
-:107B80001441423245DBE25F5AFFF3BEE79CCCDC96
-:107B90003B1350BFDAE7FFC3E3733CF7DC7B96F798
-:107BA000BCFBFB9E3377FEEAF9B1A38A0959ED9538
-:107BB000120D8490CE5DBFFC577A1221D54FD65955
-:107BC000245A6F7AF6757DC04488C6DBC29EEF8A60
-:107BD000B7C07BE79FB8772C194CDB5B9BB0FDF3FC
-:107BE000275AB0BEFF57CFBFF67FE87B35AE3807C8
-:107BF000BCF7F98BFBF4F0BCC6AD75B6D292B80FEA
-:107C0000E8679B69E9794626C9844C21ECEFC1DD20
-:107C1000FBF4F67C5A6FA5A3D2EFC95CBD77400E8A
-:107C2000FDAE75B776A909DEF0125242C7FDD5E266
-:107C3000916EA8B7DB08490B3DDFA2271E63022D1A
-:107C4000FB101243CB0BA5268F144FD75566DA02D3
-:107C5000E585DFC4CCF5D2EF6AF5813C2BCC6730EB
-:107C600071423DD5A2C1EF6B5AD7EA6A4DF83DF695
-:107C7000F3071D2150E6130F393B88AE9F9027BFB5
-:107C80001E0AE3FD96101BBE3722A68890390B3ED4
-:107C900091603EB183EB75AB719ECFB276BAEAF0DC
-:107CA000F6610D743C3AEED7F0372E5416594C3825
-:107CB0003E05087E97DE56996187F527191CB07E30
-:107CC000B1BEF46A7793993EBFA9C1ED90ED84BC33
-:107CD00072EEE884BEB4FEAB41D250195E97A5C5E2
-:107CE0002EDA7FADC784E3ACD950463EA5F31D0F15
-:107CF000BB48BF4FB690A41BE97A2AB424C9042517
-:107D000021C77445D0FF53D86E371027A178607F04
-:107D10007DCE531BE9270FEADC6925D0CF16BFDEE5
-:107D20000EE5936CFEF47B8BA908FBB3DC08DF1B2C
-:107D3000C93AF8AE7BE3D4A4AD12F6EBD72584E6BE
-:107D40004D48306B763EEBAF18E034C93317DE2771
-:107D5000763DAEEF737805F7D153B0301FCA6D6C26
-:107D6000BE1AE2067C49D6D312E1EACEA9A478B3C2
-:107D7000C452BAD052122A93FBB076355C5B78FBC2
-:107D800027162796645722212323DF13A580FFFEA1
-:107D9000395DFA001DF7FE573F41BCAD05BC85F1CA
-:107DA000DD67F4B00E81B7CBE013BA0F0FEEF90424
-:107DB000F17659BB84F0A96D2FD52FA5E58546270F
-:107DC000F9544BEB1CFF1E94025580D79E3D319613
-:107DD000A7289CBA047E367F7256A6CF73DBD3ECFD
-:107DE000123CDFC3F0F4A046E301381DDC79434BBD
-:107DF00093143ECF8D081FA99A209DD4D613AF812E
-:107E0000B6973ED6707432ADAFA9260E039D57AD1E
-:107E10000A8F721E3FBD19F0C55A438A63ECB0CE7B
-:107E20008F27F4A5FDD7D69012A0D3F4F1CE3D5004
-:107E300027ED121900F56AD73218FFA6A4950E99FE
-:107E4000F66F1DEF6A83F16E4A1AE390697F0F6641
-:107E5000B66E36D2764F05B13C0570D0359769695C
-:107E6000FDC10ABB854292C2EDC954682783F48ED6
-:107E7000A7008FDDCB6AA0BFDAD4F90EC09308FA51
-:107E8000DFB37110CCB7D6DEC71143DF9FD22E21EE
-:107E90005E118F89C0FC6B297CA13EC53BCA0BF3E8
-:107EA000B9C8E127E0D8A5F32F82F975BD64201E7B
-:107EB000DA3E653CC357EBF856E41F6FEE997858ED
-:107EC0002A08E1A5F965830FEA095A8BE400BE444C
-:107ED000661A603E4BF97C9A7564B18B7E679DC4CF
-:107EE000FAE977B784FCE259A0271B941A5EEA39B5
-:107EF0009E37B3D2E22970517CB8C8F71FD184F6FF
-:107F0000BB9AE3CB9A653EA4A79AE7587F490667D8
-:107F1000E1FA30FC4D2A2748C7BB62C8E24AFA7C26
-:107F20009795956A7C7D8FD375CEE3EB70DF97D202
-:107F30007D877D4DBF9B3E07B851BC00B8D17D44C5
-:107F40003CB8296905EEDBD2BBA55B701F3DC308B9
-:107F5000D46D896C9DEAFE8FF3F5ED8A71154BB4F3
-:107F6000BFA0CDECD829C17C9C9A18A8175A1D3BFC
-:107F7000097CEF7A12C6B3A5C4389AC2F81521AEAF
-:107F8000620D1DE75CB299EDB7F75DED8C7CA04703
-:107F90003BB6DB64E223C87F48AE2B3FF45D453F30
-:107FA000D65F05EF6F6AB3A780E43278205C383C77
-:107FB000BC1BFBCC0DE7A71F717878AF2373816FD3
-:107FC0001CD4139311FAB7D071687FC93B473DB1F8
-:107FD00015E7D784EB3A60B1605991E82AAEA7FD66
-:107FE000D9FAB91A002E629D6A782CE1F0D83F6761
-:107FF00051A106F07896C9017477FFABD212C46B19
-:108000008F911225E03DA34342F703E882B8B5B84B
-:108010001FB5F52E6F74BCAF443AAB4D8A71C4489E
-:1080200088F74E947F1E9397E13D937FB19398BC60
-:10803000023E59991FC90F049F01F906F82CE8A2C6
-:10804000766C200FF6F79BF2952E1DA3F32E0A07F0
-:10805000A0234137E65718BD6CDD682F85F6AD9437
-:10806000EEC3F7FB90DE83F47B28B78F03FA8579A4
-:10807000BACC21FEDED7E28AB752F8D56A7C9BB52E
-:1080800039217E5CFBCA5D79EE28F827F8B151CB27
-:10809000F89CD11BEB65FDB2F18C14DCE6222C3D83
-:1080A000208F623730F8A8FBC9B50AF96AB49CA1E1
-:1080B000727C3ADDA4F87E844CD2B873613E6B8C3E
-:1080C0008143746749D686A01EE6910CB20BE8671F
-:1080D00067AC17F856723271BF10A5DF242BE3038B
-:1080E000625F9A13181D25C7B1F7C75A995E516888
-:1080F00065783991BF2FE62FF0DFAE717F42E4DE65
-:10810000E598F88ECE0BDBC57CE8F75B0893BF38AB
-:10811000DFE43BF3766E0DDB8F101D5D5704FBD45F
-:10812000EF6E9F768929348E90A7EAFD87F903FDCB
-:10813000C07A2A07F7FE5EF33E468F6A7C9CCEF536
-:10814000299395B0F774BEBF225DAD35939D30BFC6
-:10815000EDC49948E755F7DA40460FCE601EF4FFAC
-:108160006682FB19D88FE1E3399ED3E733E8F3D574
-:108170005AE231D03D59BD4BE70D1819CD7C4DFF6A
-:108180001B97C0FAEF361B3D32C5F30F13DC0BAD66
-:10819000B4EE29230E1FC8A51F53FE01F4477C250A
-:1081A000C05FEA48200EE05C2BFBF308DDFF2BB13B
-:1081B000EE25F0FE698D3F0B9E1312407C3D191396
-:1081C0005740687F6D7A5FE67FC1BC8FC86427ED3A
-:1081D000E712714E81755CF26B123C741DA7DADFF9
-:1081E000FFCDABF4AB85AF5E5C783B40696BECA236
-:1081F0004768B9C0A8316A8786E071D21C9DBFFE6E
-:1082000098E385AD89E95DC18D062FC047FDDEE4A9
-:1082100004F65EDDE574E2490C7FCEF8689D36A871
-:108220000715B2EE7216F1D0714F6948756B143DA7
-:10823000F39495F1AF368AFAD1DA4F733CDBA5237C
-:1082400079DB613E2D940F02FCB476E417D5BFC8EC
-:10825000716CA5D5B6DCE021D023820F48C8FF4F52
-:10826000EA18DFA17FB38CC342F213D413D00FAB53
-:108270002D1E9F86F28DEA06B34F2EC0E7DAD1B0ED
-:10828000771E8B16F8E0122E1797D6BFF995144774
-:10829000DBB5C4389A7EF79969591C8885AA1FAE48
-:1082A0004F06E53B654133D22768B4A08F4BCEA97A
-:1082B000F2D7B157D3E7B4A8B723BED0FD9D96E05F
-:1082C000F2C27E2F8867F05EB03ED6EB09E37FB343
-:1082D00038BDAAF16C17E0289DEFC712932BEA7105
-:1082E0005E4C289B0AFDFEC3EC7A16F077C1FA8B30
-:1082F0000A7ED625059E7E04F071ADD9F114EB36C9
-:10830000CB15462F87C5B89735B87FDD85FEBC0DE8
-:108310003980F7C1AC0F289C5777182C1E3BB4EB63
-:1083200015FB7FBA9132BEBC30F974AEFF04620215
-:10833000F83B36033E2CDD124B3C8342EB00851BA1
-:10834000F0BBF632C17E9674BC7902F879AD368006
-:10835000F8B3C468C2FDA9BDACC579902DBACE8072
-:10836000F89ECADFC438E721589FE767A3AD676F5F
-:10837000A00F53E8735CBFFB6D78FE506C1C71322C
-:108380007AF10EA4F3BF64B4C7275078D5E9297EEB
-:108390000CC16E5CC630FD8A649895FBDF71E42BDE
-:1083A00098CF32A35B0FF27EF9DC7A3DD0E582787C
-:1083B0005F896570F8BE8F96BFBEE19BEFFB6ECE06
-:1083C000874EE9295D44A1C3D39C2E26034ED2F2E9
-:1083D000543AA39F5359A4FA0528AFA725FDEE549C
-:1083E0002EAF17B1BABA1F7D02A39F53054C5E7919
-:1083F000D631F9A17EEF32DFEF6909CE20C04D3CC6
-:108400001F93C09EBF98E0FC02F089F2C3BF737C4B
-:10841000F559697F0B5E3720BE924DC13CD8C79E8F
-:1084200075E5F1F926479F57DF04B63EDAEFBF60E6
-:108430003CFA9E13F5F6D762BC608790A9943F037F
-:108440003F5E9749801FD371F50936ECD767C5F7B2
-:108450000CB80EB285F2698AB7DD2576DC97ADA53A
-:10846000143F814FEC3558804F087C127814813FBF
-:108470009C8F09397C33C86119E570624209CA6171
-:108480003DD039ED51CFF4C1FEB8DF8867F237DF58
-:10849000EFBD46B68F94DE3313703C5F7E38BD0966
-:1084A000380B3E79AA8F122F9EE27C70007FAF07B7
-:1084B000CE09ECBDA47E4CEE09FBA084EFFB335645
-:1084C0006529E4D8F0494ABDE4198E6FCF58E3C45A
-:1084D000BE1402BC85FC8BD8EF47D97ED3F786C18A
-:1084E0007A1618828B12A9FCFA01D58BF445F8DDB7
-:1084F0006EF82EC24F319EC9DDBA7566027A81339D
-:10850000C1C2E05F1CCC82FEC8A020F2A12584F28B
-:108510001BE9DAFB073E81344A23D3E298DC9164FD
-:108520003A20D0CC206287FE28BCA784C35B3DDE06
-:108530004968A27AE0EC04497B16F6A89014C27E42
-:108540002D7AEF0BF342DAE5458BD1A3A172E487D4
-:108550001AF73CE8A7F3B623A8F79FD4FBF29A4D8D
-:1085600051DAF5BEC71F9242ED8B9F913D7ACA67E3
-:10857000DAFC9D0FCCA178B9C42F3B60C82577FCED
-:10858000F59DE1A04FFB750EB06BA93E71B796CE7D
-:10859000FBA486ED27A957FA051A38BD50BD4A4BF2
-:1085A0008685F893D00B5612DF00D01F9612A71EB7
-:1085B000CAD36B574C25145ECB4D0DC8B7CEAF9BBD
-:1085C0008CFA7215F160FBD22DBAD3E1F26479B363
-:1085D000B2BE62BBB2BED2ABAC5FF811C3B748BC8F
-:1085E000677A98AD3CBA7EF118A7B70BFAE8EDDBD5
-:1085F00038DE96FF6CEA4348FF7E1D31503C69D857
-:108600005B9A42A2BC2FCABACBB9C41B268742FAD6
-:10861000471EF10E85FEAEA03F10FA013BB721C602
-:108620009902F6C885B2E8F37880CFA3EE729F5E18
-:10863000FA8DC37E2FE45E7D9D75978DF85EE4F71D
-:1086400026EC97EA5951BFFFAD805342F4F65FF72D
-:10865000CC2F15E562E83BBB4AFFCA40B95A77D92F
-:10866000A290D3A1F6242657B99F80EEAB07F562FE
-:10867000AEF7518168391B1BE263BA3E6C3E826ED5
-:108680003E9588310DFD6AF7723BC25100FAF1A7A1
-:10869000A07F01DD4EB4BF16A0535D7AFBC83C6DD0
-:1086A0006E88AED4EBA1F8F879204C2FD89F604E9D
-:1086B000C2711DC401E30A7A58745B45BC9BEEDBB2
-:1086C0009FEE284F710F0EC73B0F8E5FAB177A9F3F
-:1086D0004921C7894ACE2F6D3F827ADD32A32B0F05
-:1086E00098D39FF7DE867452455CC9401FDD7B0737
-:1086F00066B9FF17F25DCC67A6E7561DD3E3295094
-:1087000029DDCEE0F399D9C1F44A8DD1A9C3719C7A
-:10871000C46E4946539DCD9732592DAD8FE9993F8F
-:10872000381D0919CDE72FC1F714BE63784996B8F3
-:108730005361DE0618978E1743BCA950368D74D846
-:10874000A11C27B9B46C1E5EDCE709A43E03DED78A
-:108750001803325B279D41327CDF032FAC9B797D70
-:10876000D3AC4B8B96C3739319F98F9ECF434EA412
-:108770007C7310F22523ACDB60F29D87759979E953
-:1087800029637ABA2797389AE86B7D482B81714D17
-:10879000A68B1E58AC855824A8C7582EF9C05EB9C0
-:1087A0006831793443909F1A12819F4A6F57C1BE36
-:1087B00050FECDFC57BDB56B7D682709FE98C0E71C
-:1087C000D7C4F9631A61704822AE7D4E8AD7F799F3
-:1087D000ABA6923810E36E1C7F47DCA4C3305F0069
-:1087E0003CCAF949DAD3E172C6E6D22AF85FCA5C1C
-:1087F000653DCDADAC1BC9490BE8A392CF95FA7589
-:1088000022DA7F83C09FA3E3FC66561F362F813F89
-:1088100079899CBF733DC4C5FD01B5097A827EC4C8
-:1088200064A3910C41BD242F91F9073EA63B4DED69
-:10883000C620F2F3C271CE010F50386F7E4F76DC46
-:1088400049F769B3D9BE510BFADE3C89E9F7DA562C
-:108850001FF8875A16591D5BA13DC679CF3FA1FD70
-:108860003D9980BE55077EF94478D1520ADFB56440
-:1088700059F0BDA4F220FA53837711D4A722F0F463
-:108880000A9D3F85F713880CB49F6596D5CFD1F725
-:10889000D35CB10E29ACFD4968A7F394385EC0F3F0
-:1088A00071C3C0FE657FFD3A0AFD4EF06F386594D6
-:1088B00087751D856F98E83CFAB90B1D80B6FD3BA6
-:1088C00078FC25C9E065F1074AB5741EB38D6C1EAE
-:1088D000751DA53797D0F6FEFEA104E210B187ED15
-:1088E000F36BA04943ED6EF8AE2C16FD5EC7B8FFE2
-:1088F00089707E305C456FA342F88FED85A24ED51E
-:1089000006E730E6D6C07A12A30307117F8C3E6FCC
-:1089100024A13FF8BE3CD41FF2A3F1A1E610BDD1C3
-:10892000A515191D4D35F4BD839513110FEBC0EE40
-:10893000A2FB315CEBDB07F43D8A9785BC244B9AA4
-:10894000119E5B37FAF6EB72C0D5E292A13ECC7273
-:108950005713F43746F2619935F7DE2640AB7DA018
-:108960009C217EB92B801E3757100BE85F4D231CCE
-:108970000E0B6D9A3397F96767CF357AC1DF3F5B8E
-:108980004B585C4CEBCEF901A5AB1F2C607E61A867
-:108990002F08F3BB8838C8316AC7EC8EA20FEC4BA6
-:1089A00064724A7C5FB749AF8837ED4D3461FB1381
-:1089B00089133C89A8A7B97380FE3627727D6C1095
-:1089C00019047C258CEEB722DD97BED51B5F50B60F
-:1089D00073BE30DBF90B1DEAF19C3F083EEC023A16
-:1089E000A4DFF925A70EE0F7611983FFD1D295C85E
-:1089F0001FE610373EA708A27385FB9B2685E94337
-:108A0000749CD92EA57E3467AEB22EF0558C3BCF28
-:108A1000AD6C9F21F4DB494AFD76C17F5DB1A21C9C
-:108A20004C797ACDD7D9185F413F411DDD27165FBC
-:108A3000D1B278CB26BD17F4A4BAF6B5076D40477E
-:108A400077104E47BBA56518FFD92D2D0FD323FAFC
-:108A5000D67825E0FB03E99AFCB8AF418C2B1DD3F7
-:108A600079F741BCE5D84ABA623ACF37F42C6E792F
-:108A7000208678C06F2DF0D33C83F95D291A63FC02
-:108A800024C312EB007CDAA229423FED9638B323CF
-:108A9000DC2FBA7523C5BB30FFACDDC0428CC77A72
-:108AA000B17F8F24323BE74189F9C93DF38C68EFF0
-:108AB000D9FAB91471099B4C4E80BFD19368473CD9
-:108AC0007A90FB4320AE3794965E89E9333DDFCB45
-:108AD0006413FA2755FCC796E8C0B8802D3E1FFDE9
-:108AE000FB733B0A9F447E638A710C9042FDCF75F5
-:108AF000B7689783FFA0A345BBCC14C2BB93025FAA
-:108B000063492CE06B8FBFEF0503FAFB7EA871056C
-:108B1000002F6BF4BE02A2C4E7C0D5E4D80A8E2FA2
-:108B2000BA32D7BCE5743EDDEFE899FFEB0E82F474
-:108B3000FAE21E2BFA2BB53308CA934DA504F1A116
-:108B4000BB4542FDED336B35DA019BA46694135DA2
-:108B5000091370FF56990EA05D5BFDA8EE74B8DE98
-:108B6000B5EA49657D35F1A35D5DF35C043E23FF05
-:108B700012FCB1B64DF91DE9AFE48F859CEF17B932
-:108B80001C332B60EA731DFD985D4D7C06BA8E92F6
-:108B9000B7F5DC4FBC80C94DF2B404FA56B7F99C66
-:108BA000CCE89CF1E312DE9F5A0E95707D6A2CE5AD
-:108BB0005B607F0AFD88BE8FF5039A0E3955139AC4
-:108BC0005731FF4EE865826F8B7D291D41C8088AA9
-:108BD000F7B9497C5F73492EEC2BED1FE901504238
-:108BE0009F80FD7BC06E1BC5C7A3FBEE0139EBD197
-:108BF00018BD80479BA57AE4D346C2F9B5E446BECA
-:108C0000FC3B8F4706B88E24F533A7D2F7461BFDF1
-:108C1000B1000F8A0F7949B6109E34115FD66E49A4
-:108C2000812FD8DE697D2B2ABE08F9E2FB90E91777
-:108C300053E88AA19F0A08F8D0F280C4ECC289A642
-:108C4000FBB5F0FD5B9AC9880F9388570BF3ABB067
-:108C500028F77962AAB23ED91E8107328CEBE4F084
-:108C60009C3248D9EE147C8D28F95A0EB982FB4CFF
-:108C7000EE3AF443F00BC46E208340EFA01A22D2E8
-:108C80009B9A1F4C4AEA355E3229294ABCA49BFBB9
-:108C90007F6F2481AAE7A4487CE93AB8414E0DC30E
-:108CA0002B81C7AFF0FC0AE9751E972D66FEC090B8
-:108CB0009C67F8328CD76E047CA3EFAF1478924D8A
-:108CC000B2014FC6B4C7F8640AD742DECF8D8037F1
-:108CD000452179EED398ECFA5CC00FC716598ED4B3
-:108CE000DB9313EC882743354EC49312E24884FD8E
-:108CF00019616C6DD2C2FCF70CEFEB3629F0620DF6
-:108D0000E28544F102E92A422E2ADB557823F6EF68
-:108D100030D79727124F7F188FB2B103A02FFB7265
-:108D200018DE541027E2C99BB99379DCDAADC57E11
-:108D300088521E961B9578A0C62B3AA2267C5C35DD
-:108D40009EF58637D98037421E265E1B6FEE49326C
-:108D500029F4EA30BCB927A9A477BC51E38BE027FA
-:108D6000BB632CE5A097D6554BC88787BED3BF09F8
-:108D7000EA03D7E460FECB6EAB03F5D6BA7AD65ED3
-:108D8000EC77CA901FD3AF81B7E7B8CAA15EB781AD
-:108D9000C5294A8EB1FC99FE77B0F6C23BEBDF30B5
-:108DA000837CF7B0EF5F39BF598EA3EDDECDFCFBBE
-:108DB000D2E672A8D76D61DF7F067126BABFC34EB7
-:108DC000789BE0F97577E73898F9C9F4D9711C4FA9
-:108DD000774B2FBC81DF35B3EF561C32F621A80745
-:108DE00033BD752C5FE7B847D93A933EBD69929D74
-:108DF000E2EFF2A007F5A6B39A9A61C86F7AB13391
-:108E00004BA5E60C2829DE209F711A295EE7B238AF
-:108E1000E44E3AC45B49CC9F21E277904F109E3FCD
-:108E2000F0561293F7E2BDE404C2E2CD0F9BD11FCE
-:108E30002CE28BBE87880474066BE4F23F6ABC7137
-:108E400062BF7A8C334ECC1671C68076091DB7F09E
-:108E5000EB2F2644F3A71C4D627AEA399E1F219E10
-:108E6000577B73348017BB0149D20148F5BF07BD5A
-:108E700009FDAF4C6878C808D857560F24D56CDD6B
-:108E8000428DF4159A7AAD07844C16B5BF68D7D3D6
-:108E9000FDC4171F1739FF895AE203F944B46CFE69
-:108EA000554D540E4A21BE345BB09DD103904E67A0
-:108EB000F17DBA28F8CD503214F8CD6CBE6F3F303A
-:108EC000D6EB98BC6CD6A9E8FF2F48FF3B7AD59B20
-:108ED00095ED2AFE50CDC7ADE2FAF24A1244BDE04C
-:108EE000ACE4C5F2DC0EA62FAF361D43BDA2FB617C
-:108EF000A627D69000EA1D6AFFE1EA5DCAFA9A56F3
-:108F000065BDAE5D59EFCEF7E038DD3BD60C03FF13
-:108F10005DF5F677D02F5C2DF88457C927A882C459
-:108F2000F8C443D7A3DF4663A47CA218C0D507F3D7
-:108F30004D86126722F00310B25FD3FA5DF0491A32
-:108F4000AD6B5C093694339312CF88F1658CE7BE24
-:108F5000E3B487F6A5C72E54F18942E18FE99F80DB
-:108F6000FE2AC1370AB95E4226A9EDC6FB91FE86EC
-:108F7000F25ABE8DFB53B8DD23F40CFA3DEA197E9C
-:108F80008DC9ABD184EB155EA4C72223951348424B
-:108F90000E23B3579A896A7F0B6D57B79B94EDAA3E
-:108FA000FD1776CB30BEFFF388BB2FECC72CE23A1F
-:108FB00008F2E1E887D50A7BE9C33F4E10FE14B4FE
-:108FC0009BBEBDBDE4FB4EF652CFBEC750FD919691
-:108FD000E533260F7800E2E36D3198F75927B17D2C
-:108FE0004E9E772C2BDC7F78B491D8B46174DF343B
-:108FF000D96084F860938ED91333A69C1AB6248C5A
-:109000006F3C6F2C9D0DF0DA2CF97FF411D81747C7
-:10901000648279351D36DCF74BCDF439C5B74B8FFB
-:10902000DEE0F0D0C717742CDEF899545F05A95024
-:10903000621E551B7E1FA3A5726C85EC7D2D00F171
-:1090400055C9FB720D6D3BAE772F85FE576B7C7A51
-:10905000E6B7F3639C54F4DFBB1FD2837C4CBF9F05
-:10906000C9C5A0D4C7C1FCB89EBCF078D39264E651
-:109070006FFA30C15507E308B927E20927D74E8CAC
-:1090800007D1F02571C6439C53D242CC2E723CC806
-:109090002BD814E6573E19133D2E70878DF1579843
-:1090A0003EF0F734ABF32736E0B7DCFE3BC7E35DB9
-:1090B000E7E258FC6B8B8DC9810EFEDDE3BC3CC73B
-:1090C000E363E7129476A378CFCBBF3BD368346ECB
-:1090D0000ADB4FFB43867A2FE653F1FC9106C2EC84
-:1090E000A43DD696AD61F1D0676DA51D000F5B3F25
-:1090F000A73E0DE0B787C961884743DC78A4C5FD6A
-:1091000020B4D7DA8913E2AEC41ED0CF84F823D8B6
-:109110009DA83F307CE98E61A598D7B3B6CA0E589A
-:109120006FF7DA00EE674FBD92F1C7676D2E1CB77F
-:109130007BB668E7F56D01BEFFCC7F20FCD9BDC5CD
-:10914000C3D4F12F2A38989E1DC3F8983AEEBD502B
-:10915000F0311EF75EC0F9D0C20EE61F5F64249B9B
-:10916000FBD2F6C51D29CC5E8CF3E429E2DE9ED845
-:109170006F95EF20F0B33BD3DF13AF7D382C5EBB90
-:1091800086C7FBD688F5B529D777C4D66BBCF688D9
-:109190002D4ABC569D17F032C8F7FE2178AEB3B009
-:1091A000F557C835E57AE013CB08E691AF3BB2B48A
-:1091B000C948EBEBEE02CF1FFC317D750D87576F71
-:1091C000F3B3B934C4AEF013F721F630BB38CD9DFC
-:1091D000A0A8A3061C9687D9B73A5DF17D667DAE3F
-:1091E000E2FDEC0DD72BDA733C458A7ABF2D372A86
-:1091F000DE1FD05CA6A80FDC7E93E2FD42D22F1EBC
-:10920000E3B18765F09590EBBC3314ED37ECBA45CC
-:10921000F1FD67A4FEC1D1F4BDB618260788C7E9E1
-:109220001F3C2C94779CDFBA44F17D93D43ACC4711
-:10923000DF5FE667FEF621EDAB14FD5D889BC0ECB9
-:10924000081E7FACA7FF181FB7CBA80FB54BE46172
-:1092500029321E59DD71EFE6BE2452AFA07F28E708
-:109260005751390F7A945ACF30279B93101FD24908
-:10927000FAD7617415C20313EA61971E95D19F5600
-:1092800048063E341AE1A3235E7BE47E5D22CCCF08
-:1092900073E939B303FC652B8E2C45FC33A42AF10A
-:1092A00020C6AEC483D8414A3C303B94FB1E3F42AB
-:1092B000B9EF6A385B9D4A3C107014704E9CA4C490
-:1092C0000B01DF11F41FC0B788040F619EB5577200
-:1092D000F84894786F7B0BAEE35A7ADB70153C87C5
-:1092E0001E703699104E2CEF4AE84906EE9F56FB49
-:1092F000CD85FE313199EB3DBC1FE1E7DE2C795085
-:10930000CFE989678DF065F97240DFA927CC5FE26C
-:109310009A926C8BEA57C3E7BDF9D5041C853EB31E
-:109320001AF4193ACE72E246BE7486EB332B4CF730
-:10933000635CF0C21F197CAB8917F9F5B78D978371
-:109340009E48C2FC8D6A384A1D92CF0C74C0F976D3
-:109350003AE9107CDB8D791314ED8CC314F105A56B
-:109360001E4A9C52387F127AA9184FC053F02D31F3
-:109370009E81D4CBA940072A3E4606A9F554A5DF15
-:1093800043F84970B0B038C6F09EF804B313437E7A
-:109390002FE6E790B3739A08E8DF16E1D7F0CF879E
-:1093A000E7C2AFA1B6EFAF15179DE991028FE44474
-:1093B000C643457C952EF3D38FE8C7A3257B268C27
-:1093C00037E3958136A289E697739C7895F6236BEF
-:1093D0008289E1FE32E1BF7E530AE0BC7F409C3FC0
-:1093E0002561FA422D699D303F07FC9F546EC541AF
-:1093F000C9FC3EA45DAD97B278A286AE04F07B3581
-:10940000098B17E684DAB12E47D6459ECBB5E4FB2F
-:109410000D2916EEEF60F93984F33761BFF5662F39
-:109420008978FE413D85495128AFE5E5646E6716B0
-:109430009002E89FD2D52BC9689F533A94C2E9AEF7
-:10944000270F06DB23E84EB57E11CF97CDC5E87711
-:10945000591ABEDE6F000FA147FC8BAE0DF6E7FE7A
-:10946000643BD6D7F439F907273417FB15F98C7507
-:109470007A963F4C5A95FAF3C7C91AAE4F38E56F42
-:1094800002A7DEF781E785F17DF8A6FA90C80B13F5
-:10949000F03B23F86008DEE7147CACC76EEB81F785
-:1094A000B9687C4EC0E36289FF69D827D97C2C1942
-:1094B000E0FC0FB3EB22BC9F79227056D284E655B4
-:1094C0002177623EE8A57619EDA4DA312C4FA87613
-:1094D0000F06CD49578701E382D5ED6FA07ED6D91F
-:1094E000481969FFDEE1D4B35E15BC7BB357C47A7B
-:1094F00074294A7C13F922749D312951F3017AE0D1
-:10950000A06CE77010794A15F2E0F840985D728817
-:10951000EF7B8CD6159F42C72F7E3F230EE0532151
-:10952000771C4A07383448785E699C8178C0DF9F91
-:10953000C6CFAD8D08D43B2C141EA919263C7F3410
-:10954000F087B20BE299A71AD627C0F9AACF1BE978
-:10955000D0D4EE1828695C886FE4858F7F5C0C712D
-:10956000B60598A7BCD0C0E2FF393F8AF5F5A37CC9
-:10957000E2753D3102BDE972EBF17C46D02AA3BD14
-:10958000912493F1805F02CE49B16C1DE279E963C9
-:109590004F4A90CF249E8F6B0A0E5D07F94CB0EFB7
-:1095A00025A1758E2B0F0EAD3785E02CF204893680
-:1095B0009835238C3E8E7078D4DAF49B411E761950
-:1095C000B91DC8ED4162D1221F69E0F1F69303A8ED
-:1095D000458AFDF8CC9097551BE38C1F0EFE2EC8D4
-:1095E00027A0C5971667BC15D76F47BDB981EB5744
-:1095F0005D3CCFBB6172590AD853BDE53F4D4D610B
-:109600007A7E0D8F838BE7355A1FE62DD540DE71AC
-:1096100058DED3B7CD3B16F9E6BDC2C1AA255A0A1A
-:10962000875A89B8AEF6DEABFF92A3DABBEB5334B0
-:1096300057CD835B952229F2DC6A21CF8D3E6AD813
-:10964000539A42A2F4D7236F2EDFA8C8271379D2EA
-:10965000B597C7623E59F9CF3AF19C20F46337853C
-:10966000F2DC7A83F3916406E75AC80F1B1AFE9C5A
-:10967000E151A8FF24DC875F0300C1DFD12EA35F87
-:10968000F6D7873593764699EF76BEFEEB6D5AA4F2
-:109690008F1B7CC4D912657CF19E38470270AECC1A
-:1096A0008F9C5F5B596011CC1FF257A38DB795E378
-:1096B0008B98775B42A08AE3399EE3E8A95B94FB31
-:1096C000F80CDFC7B69B0259781E6972F47C7AB138
-:1096D000DFC3B4F512C02360761F44BD730EAD0C1A
-:1096E0008173003E0DCBA36274D6DBBE87E0AD5123
-:1096F000E41546C25B8FFB2CFA1376C9F9ED32C62E
-:10970000FDCF1FE574499C2689D2D7AD5C6E9D279D
-:109710002C7E70BE59427B64899B900D94BFDCFA0D
-:10972000E46A8CDF543D357433882B787E07E5235B
-:10973000B7A6123296964B3629E3B7CBEE8E88D772
-:109740009070F948D54FB4AFABEE577E574DEEFE53
-:109750000BE83FD52AFD6620F777ED4DE1F6C230E4
-:10976000320CF8FBBAA7BED043EA6E6FF8FE39A5FB
-:10977000EBFE5AE083162CDF4D711E003EFF718A0E
-:10978000FB4DE0DBDDEF31385CAAB9C4F8FEA3493C
-:10979000286F0CC09CE9FF1AE6B338ECCF28BB80D9
-:1097A000F89BC1C0F41BA1D7C9F27A398EB68FFCE1
-:1097B000734302EC5FD2B3132781DE6F7B36D60989
-:1097C000F0DA5AEA2C043FC0D64A13E633180D2CBF
-:1097D000FEEBFDF5C8FD100EE8DF7A6F19D8A196F3
-:1097E0008E7D3EF0936CD1FC05CFA16C19CBF2DDE0
-:1097F000C438751D95BB613E59B398DCD89AE32CEB
-:10980000B484F54BB89E56CB61D6BD77E03D70FE73
-:10981000FD91C3A826D3F5E5A23FEE7AC2F653E444
-:1098200055C1D8E1FA6827953F909C27EAD7B74AF7
-:109830003E1D5DCF9AB6DD18C7A8B9D3973C1FE48B
-:10984000CC335A8C0389F925BD9E5606F11E215F43
-:10985000E64B1694FF42DF9E47C41F8B17CDE57879
-:10986000308FEBD9F363197C971047167C778B9177
-:10987000C4819F7A7E796B09CA9FD53A2BE835223D
-:10988000EED1BB3E10DD5F54FBB4999DA795827964
-:10989000D0C9E7D4FE20CC6F14F57C52522AE3AF36
-:1098A000B5795CEFEB4F9C1067AB7D6D600BF805F5
-:1098B0000C7D583C96F21DE38822D47B8D60CFACA2
-:1098C0007C35C6C7FCD65E7E6ED6590879217533C5
-:1098D000328A303FE104E51F66388F18C8423AA546
-:1098E0007C45A2B22D7FBB65AA16CE0DA653BD8ABC
-:1098F000D6E7A7664DD5527CAFCD0D546968BD69DA
-:10990000FB7056BF3E7016EADBB697B17A51A04A9B
-:10991000A6F55DDB5DEC7B30F02862BDB47DCE54F6
-:109920000FE813562EAF1D013C475CFBCA404DB8F3
-:10993000BFB22595F1A5CFB9DFF5F31CB27806C00B
-:109940007B5000CFA989F77E9A2AF45C96E72BD644
-:1099500029BE23A9D1FB1F9DCAFCC42BF9F9DF71D5
-:10996000B1644B0C8B5779E228FC0F740CC4785B04
-:109970004E6A028717EDA738D48F80A3E84F8CBBBF
-:109980000AE42AF05B1DF39B8AF6C9A98C3FD271C9
-:1099900036E1388319FC6B676414C2BED1FDD2F284
-:1099A000FDD232FBB385CD8FF66B2D40FE3E14FC0D
-:1099B000DE07AED0F77342F356E3C70F387EAC6CC8
-:1099C0006271C6A0B51FE2D1B858A6EF9162E53A20
-:1099D0007671F8B5A45A997DD5B31F29128ED3C4D8
-:1099E000E19841E19EFFEDD75DFD3DAD3B6CBF9C35
-:1099F000709EFF40FB753BC3D723F2B6453F9F6F78
-:109A0000547D3782E54FD526F4C3EF7E16438CF89C
-:109A10009CECECF92EA780E999A07F8AFB1D886752
-:109A20002C3A0B6A38D7E8B9AFA195E711F677B2AF
-:109A3000F3CA33A616F3F559F8FA2CC6B07B1A7A96
-:109A4000E8F158306B9639127F7BE0DED3DFE022FD
-:109A5000DE9F82AEA3F507F4D1DB7E3CCCF1E3DFE1
-:109A6000B61F629E2A78F6C059353F014FA067FCA9
-:109A70006EB0121FC53CB7A58ABC61155DE77CC7F7
-:109A8000F14AD9776B6EE3F9C076253EAF69CBD149
-:109A9000401C5D7C37097CEDB690DF6D6F2AB7DF27
-:109AA0003248462F7970FB52A3FBEBF0B9DA7EEB1C
-:109AB000B6B2FC67B5FFA0DBE6F0C3B93ECF457692
-:109AC0009E7D944ADF8038CC0BA6D0772179A2AC5A
-:109AD000C7A531F845FA838278FEB6D850F6A2DDE4
-:109AE00041C847DBD7207F2E8E2F5B9F43EB81ED54
-:109AF00075ACDEB7EC8B1CCABF4F6FAF67F51BCAE6
-:109B0000BEC8857AEA5A561FE77C51C608C2DAA950
-:109B1000E3D342FAC3A7A976A67F946B08E09141EC
-:109B20005EEB003929E0D95B596CD0D447D34F3B69
-:109B30007BE899C5294670F93C42D8E701ADC23EA1
-:109B4000EF8E63E793BB419ED2F5FE3DD5FD975462
-:109B5000D053623B17E5D0AEEE8CFD580FFA90E47F
-:109B6000A4FA06F83BEC16B200F2EA3AB7BA403F64
-:109B700022AB1C462DC293FB9FE8DABEA6FDBCFAC1
-:109B8000DA33B7F765C3B8601E2339FDD7BDF6D504
-:109B9000DF204E5AF7B9C901EEBD911D3BD6837E39
-:109BA00035B2E3ADAF98BC65E735C4BC47821F91C1
-:109BB0003E1FD16EC0F98FECB86E39BC3FEAFD8E06
-:109BC0007E801F634EFA9A801D74EFFD5D5FC5397C
-:109BD0000DF299F45DCE69F4C0E3CF54798A4778E9
-:109BE00024A6D9001E57305FAACB76747300F534D3
-:109BF000E57918AA97639CF512E9E380788138F734
-:109C0000ADF65B9EA8A4EBA3CFC704E90CC2F4E5B4
-:109C10007197A97D1FA6679712ABA25E6E4C53BCCD
-:109C20005F61C951B44F4CBD4ED13ED95EA8A84F1B
-:109C3000193452F1FE3447A9A27EF388C98AF72B62
-:109C40009D958A7AA1AF55F1FED0C3EDCAF6637631
-:109C5000DC87A1275DE5A0C73BFCEE262887773689
-:109C600097C7DB4984BFB638E06D82E7A3AED497CF
-:109C7000F84894732CABDCE8E78F38C752CACEC3E0
-:109C80007769D8390EE19FBD12EB9E9486FE590A82
-:109C9000760AECB1C66022EC57C5E26D983775299B
-:109CA00048D09FD5A60FFC7C14C8F98532EABD6D5B
-:109CB0003CDFA66D6EBE177C7A27A4C0CB10AFF731
-:109CC0002C64E704C6500D17D70DB14D09F6C9AD88
-:109CD00058772959A9DAA7B58A7A85E536C5FB13DD
-:109CE00053372ADA27DBEF52EDD3BD8AFA34C70E99
-:109CF000D53EB5A8F6E91945FB9833812620A37116
-:109D00009D1ED94CE77FE389E672D89751273D0B1A
-:109D1000815E8A7DEE2660872507EADF80D247EDE7
-:109D200029F053ED6F4CC5F240A31DFD4C871A0777
-:109D30006179B8D181CF7FDF3802CBB71B9D58FE48
-:109D40004FE3242CFD8D2E2C5B1B5BF1FD171ADBE2
-:109D5000B1A410CC04799194D8730F4326D8F35D45
-:109D60009A402D4452FF3B6D1FF2C5AE3E812EA896
-:109D7000DFE9791DF9E24A30A628BDB54049F7F37D
-:109D800067E94E299D96DBD2D873919FD0AA7116B0
-:109D9000827E7D5FDA91BBB59954AFDDE84AB55854
-:109DA00059DD48EBB8D998A775E46EE768427E03A1
-:109DB0002203832647A642BD3B86B56F4B3B82FA02
-:109DC000B58823CF0AC591EF03BA57C7917F73CEE9
-:109DD0006E067FCAD12B03CDB0AEA3DC7FE4248511
-:109DE000BA5B6959AA2DD4815C3CA1D2234459A7FE
-:109DF000297D04FA6DD53866637EF04D3A02F9E8A4
-:109E00003324668FF6E881E94C1E754F33A0BD738D
-:109E10004CE35C8E794F52F07180D78B3B3E44F817
-:109E2000759B83590087DD3B4EB0BA2DF8B8E40826
-:109E3000ABEBD83A7FBDE383A91E53D4753E9F1682
-:109E4000255EDE96C6CFC7FA9C99207F45FD58A5B2
-:109E5000730DC88963A5CE01309FA32E03D28FC78F
-:109E600065F642DE25D13A4B6687F9550AD275B8B8
-:109E70008E597A4667E41639EAB9F3A9E94CCFC29C
-:109E80007D037B6E5E2CEAE1C734D1CF8D2FE3F0EA
-:109E9000B9D027BA7F65793A93836533CDD85F7798
-:109EA000430CC671BB5D03510FEAAEA750A2F4D1BB
-:109EB0007DAEFEE24BD86E10212E8C57CEE77CEAA9
-:109EC000371DEBFF7A9CBEFF7143AC0379B8E57A8E
-:109ED000944FB7F09717261A516F593823B30CE4F3
-:109EE000D27C1EF75A64D62663F84B6BD5C39542D5
-:109EF000CB4C859B41FC572555EAADB45E9DB176B0
-:109F00003394ABFADFAB87A39A3583776F06F5718D
-:109F10000D25AD12B49702EF34D2792DDE20DB99F6
-:109F2000FD24CE1FAEFE567916020F8FF17C190A62
-:109F30005FB40BABD225855D52C5E1F5651AD7DB61
-:109F4000F249FED7CA78CE65C093CE85EFE4F5E23C
-:109F50007757B673BDED0F7A36AEFADE0A31EE0AE8
-:109F6000BEEFC7F4C429811E778B19F1A360EE17E9
-:109F70007796D0F517745834188F177CDCCFEE0F16
-:109F80002B39E3463E37BC33F0F4718278DE0E7431
-:109F9000722D3935D3B311E5C3C82FA9FC01BE78A2
-:109FA000C5FDF1716C4D8A7A2ED3D758CDF9633D3A
-:109FB000F2B5038D1BB07EA8D183E5E1C62D9C3F91
-:109FC0003663FBDB8DDB397FF472FEB80B9F773491
-:109FD000CEC5F2B5463796FF30BB32D3812E8C6E9C
-:109FE000CCD33CB8C3406488377418104F29053C63
-:109FF000FE4812E4C1182C70FE4E9D0FA3E6B73D3B
-:10A00000FBDF16712FC675304E4FFE0BE867D9BDCA
-:10A01000E3CF516237033F294DCF9C06FCE3A8DD17
-:10A020006E06BDB5EC615AA7DF1E75DACD3A5A2F20
-:10A030004FCF6275B7DD6CA0F5F10FF3BAC76E8E26
-:10A04000A1F58AF46CF6BD9760B0FAA6F4FED38051
-:10A05000CF9612E900D043B931673CA4CE56584A96
-:10A060000F001D4C4CBD753CD0C19E343BBBEFC2B4
-:10A07000BEF100D4A70C6AD1C2911BA7A970137CB2
-:10A08000579654A985EFC667ACDD04DF4DE87FAF76
-:10A0900036FCBB4983776F82FA54478B16F4C13D77
-:10A0A000692C0E2AFA1175D12EF8ABC8D71AD2E155
-:10A0B000423E5ED0EE423E2EE05236ABF2A7E0A723
-:10A0C000AB6B972C12CC6396D41384879CB8DA2B95
-:10A0D000945A289F9D973EC4BC917E5707F51BB1AB
-:10A0E000BE6D6374BEBB283D8A7CF980D329C84D00
-:10A0F000C88BFE40CFEEF5780DD687FEC35BCDB79B
-:10A10000627F6E33C8D703694C4E1EE6E5655EFE7E
-:10A110009397751A6735C8CFBA741E4F8CA4EBF5A8
-:10A12000E98C6E55E7057A69E774FDC3741E5FE636
-:10A13000F727AC21EC5CD1B5F2B65686DB6F3990CF
-:10A140009FD37A08F246D579103570DEA85F643E59
-:10A1500030E58B2CFFB15D9947DA637FF4617C0FAA
-:10A160008E3182D1F1F3DED77DDF35D67D5FB475D8
-:10A17000AF242CCF59BD0EE2B6216D89BCE7C8F5DE
-:10A1800004A2AF27621DFC9E3E55BE35D58376C224
-:10A190007C2A169B09F86FC2F9C4F1ABF00935DFD0
-:10A1A000F977F1B3ABF09BDFC13CD5FC469C7B5605
-:10A1B00097429F83F352907707F7BE809F7E63B2EA
-:10A1C0007B3FD0477759F06F1AB0CF92028867690A
-:10A1D00056F741E85FD2B3F8BBC8673DA7F1FC165C
-:10A1E000F4A2F7D25722DFE902E140E9F108AD839A
-:10A1F000DE33D2E27A0BFA238318FEF496A7799421
-:10A20000CBC5C89228F215BB5BBECA423FD635F01B
-:10A21000BD373854C8A303702EE0D2885854793A19
-:10A2200025E2938A20EF3A19F588CE4CBD16CA7FF5
-:10A23000B79DD8999987FDABEDC5CEB4114636EEE2
-:10A24000844950B6EBDDDB6F053B69A401EDA477D3
-:10A25000799EDFF4D35792405E4D977DC90552A495
-:10A260009DD979644199BD20D2DEA4EB1B0FEBBBD5
-:10A2700096DDE932FA13008C6AFBB366C3DF08E4AB
-:10A28000478FDA7085C0FD65D7B647890C6CA2E8A8
-:10A2900084E30D284BCE38311D67D8B9FA37A01C9E
-:10A2A000F92533CFAF955774E3E5D637D831F1C1EF
-:10A2B000CA7B1746BCC5EC555E46DCEBB6CAA3CCE0
-:10A2C000572BF595601E851C8883F2A21440BF971A
-:10A2D000AC61F731887B18A81D9BD3D706762FCBAE
-:10A2E0009B1A07F9467472153FFE70D1ED48F7319D
-:10A2F000A8FFF4D8B12F69304FA04DEB8C1F037627
-:10A30000EC86018E8DB4FE27BFED8157695967F940
-:10A310001B09BFEFAD66C32545BD7363E8BE20C80A
-:10A3200087AEF9978C72A786902DB05F3564BF7E9B
-:10A330005D981C24AD7FE981FB10CAE72A017028D3
-:10A34000078DD39DF4BB4A6E6F107217AB733B8BB6
-:10A3500078CE4DC3BA8DBFEF59C0DA3345FBC2E9A1
-:10A360004E3A4EE500D1DFDE69584F1375DEDF75DA
-:10A37000A2FE007B3F477CFF12ABE78BF1DF67E378
-:10A3800099D9FB373D72DB74E00382BFBBFA2AEF39
-:10A39000F9A1FC7E565FDB55F34A94ED5C1E887B89
-:10A3A0007D2A7E3C39F61DA0E7560973E06AEED09F
-:10A3B000A17FFB42426B41F839659187E22A373B26
-:10A3C00041DF5BF3F2C09D32CFCB017DE37E9E8FF8
-:10A3D0005F219B301E71E96EC6E77BD3D7AA36BCDE
-:10A3E000A2D8CF88767EEF3206EAE87817B7A56064
-:10A3F0009E3BE9EFC778F8BABE92B8BF11CFB98AD1
-:10A40000BCAFA47EC409F669D2EF62D8BD9667FCE2
-:10A41000C87FAB7EC7FCBD6B76BC81726E896C4712
-:10A420003C7E27C7BD01E0D36566F717566D780DF2
-:10A43000E9B5299BEB0996E0E070787AFA72B91CCD
-:10A4400082FFA6BE255785BFB2FD7B86BFDACF2C23
-:10A45000CE49AFFA96F9695D66160775F07D3AAD9B
-:10A46000B10FE3F07A1CD67371B93FCF2A43F2B033
-:10A470003F99E51DBD5D0276D0A57A33DE77B460E5
-:10A48000FDA982F0F329A254EBFF9D4047B610BC12
-:10A490009E8BC4EFD66BE077EB7F12BF53B401BD48
-:10A4A00003E2A627D8FD63C3FCA7F5E1F92EFEBEA3
-:10A4B0004CEEC6B7B338913A6FCBDFD7CCF4241E3D
-:10A4C0008F5933E3EDD1108F11F4302E96B4827F83
-:10A4D0009DE2B583E3B503F05AE06F282E43BF8BAE
-:10A4E000425F21FC25388E80D3079170FDE81A78F1
-:10A4F000FBD17F126FDBA8FE8B71CC9762D07FA25D
-:10A5000086F3BF385C05BCE333AE0EE7F88CEF078B
-:10A51000CEF11976A5FF81C3BB37F9A4DE1F31EF59
-:10A5200028745AF25DE8F4E7999C4F6903982FAAC2
-:10A53000DEF7E48C887D4FCFB8FABE2BDBBFE77D1A
-:10A5400057C34D5DD6F0F8A6FAF9888C5EF9DDBFE9
-:10A55000058EFFBFF9CF17D6EF53B42FDE7044D16D
-:10A560007EABE73D457D74C05F0E682EFCE163CF96
-:10A570000551BFFCAE7EF5DEFCE9D35F5CA18178BE
-:10A58000DB083FF3E7FF35D3BD2D83C2F95D8DB7FF
-:10A59000C94CE13AFC642BBBBFAB3A0FF387D6F34F
-:10A5A000397E31FAEF1FDF4EF1E60B62407FA76F75
-:10A5B000DF755A7B7E241E945ED61067581E5AA9FA
-:10A5C000D1AA75A2BF8638A3E1CD7D1C6F30FF876D
-:10A5D000D2FB5C23D125513A9F3B57C27CA7B9845B
-:10A5E000E545D3D2E7A6EDD3B5C407F724579AB40F
-:10A5F0003E03C6F994E79A0DFC1E659294A838DFD5
-:10A600002C3B65CC4B9B3D82C5076F31B5E2B9D27F
-:10A610007987EFBC783B6D279B3C252CEF5A9C43F8
-:10A62000FBA3E6DBC4FDEECB6074DE2DF138B2A4F3
-:10A63000C37BB222E44106F38F4E9737CA90EF12E4
-:10A640007C8FA0DE2DE88EAEEFB0A1889DB380DFB9
-:10A65000B1A8243ADF403CF77C6F39BC5F73CC8EE5
-:10A6600070A91BB1B100F6B16EBCF489A12064D70A
-:10A67000D46DF812FBA9909F6B82F72F9D60AEF00E
-:10A68000E19DD44EB187FB2B038B802EAF65FF88F5
-:10A69000799F6CF4213E7DDC7818CB77C7BE5502DC
-:10A6A0007A46A0D11FD52FF95DFD03C22F20FC04EF
-:10A6B000820F88FBF93A32385F304A7DF15E352DE2
-:10A6C0002B05BFDC1FC95F0F655C5D5F51B67FCF97
-:10A6D000FCF59BE2794D2A938B6AFC56E3B5C06783
-:10A6E000B8FF1B7EBFE016AAEF815C9D4F3CF93599
-:10A6F00094CFCE5DD1AC1B257D77BC5E653A93458A
-:10A70000A29C37F9F6FCDC8EEB97CB65B40F447E48
-:10A7100082D887AF3222F4F87F5E432EFEF33F29C2
-:10A720001723E5DA9945DF4DAE11853E909A1981E0
-:10A73000AF199957C75765FBF7BCEEB073308B6400
-:10A740004DE8DC07E40F831ED7ED65E71AAB739A7B
-:10A75000F1DE79322218077AE3CABD32E221D13A1A
-:10A76000B56961F74E7512DF1F001F578C5E81E7D8
-:10A77000E122EE8B32B5E1F938F5BD51225FB89692
-:10A78000F7A3BE3FAA96E709D7AAF2764A33797EA5
-:10A7900070112962F9154ABD545D763512855FB294
-:10A7A000EB4A23FA01263FF6D2CF3DA343FB707359
-:10A7B0006604BECECCBC3ABE2ADBFFC3F82A9B9F00
-:10A7C000C47351DF165F0D766735CC5BF0E1059001
-:10A7D000C345C75DF0AAC10BBF0F20EEC9EE96D8E6
-:10A7E000BD34DD9F10F41B5DEB9EE591C7DC78AEB8
-:10A7F00073F8DB4E99E511B07C03A1A708BD655441
-:10A80000675066F7E1F3F3503C2FE89BF22F87DFA8
-:10A81000827A8EF0BFFDBBFCD642CEED35DA919E3A
-:10A82000857FB038E0423DAE4BE72B817BED3D7B31
-:10A8300062A2EA013B323557BDCFF51F66F70E80A5
-:10A84000FB4CCEDFC5BDAE1532BBF7F9925F46FFBC
-:10A850005DC34FDEFFED23F66BDBF575964B51EDD7
-:10A860002251D669D87989A2723BE6ED81BD04FEFA
-:10A870003BE1CF53BF7F30BBEC59985F853C1AEF6B
-:10A88000D9BCB49DCDA7B77DA9DB10C4F17B6DE722
-:10A89000E3D7ED2DB184DF8BD199D9639F59CE1ABF
-:10A8A00043FBFA4DF77F4C70AE42BFF97FDD6E98E7
-:10A8B0002E53D591CAC77CC9CBF453C2F4D405C476
-:10A8C0008FE52212C4D24D583EFD12E2C0721971BA
-:10A8D000613927DB1DC8C4FC966032E643BEFC8F9D
-:10A8E000C1803717C78E6A86DCB9EF4B4FEB2EB4A9
-:10A8F000E3F8DD2FFD230BF25AAE794F7E9CF38BEC
-:10A90000CC28F1E4FF2995317E428AD721BFAFE4FC
-:10A91000B72590F12C2E767F720EE24388FFA5B406
-:10A9200008FE07F1D6FC4F342C3F64A584F7BAB675
-:10A930000734485AF9CB73BC704F4F7B1B6BCF5F0A
-:10A9400063F54AB49E3F3286B5AFB57AE1DCC342C7
-:10A9500012407A5C0CA71E643807C3F89BB8079DA9
-:10A960006AECB9A0672DEF30B2FC7D12E80F7CBC19
-:10A97000A017FBE6E62CA6EF0FC9657C7B4899D2B1
-:10A980000F61E3ED0DD965F559B4FC719633398B40
-:10A990002E7548827FEB2F8AD12F8FBFCBF2D9C87B
-:10A9A000DB307E28BE7B24BBAC2FBCFFBCC4F2CD09
-:10A9B0003D7BF9EF17906072F8BDA273B2CB73A024
-:10A9C000BF415984DF531F1DAEF0FB75AE28F69CC6
-:10A9D000C8671C023615FAC3D9FD54CF4BAC3E32C2
-:10A9E0002BF9E64D26F4E17B40AF7D24DB5D84F35B
-:10A9F000D7136282F93F66F0EE44FDB33E0BFC9143
-:10AA00002B1E3768402FF8908A553857F251A31102
-:10AA1000CB53D4CE85F24FD4CE85F2136AE742F9F8
-:10AA200029B573A15C7ED9419186906359CE29598D
-:10AA3000B650BC4D3DDFF1598CAFF68CBF578FE35C
-:10AA40003764BB11BE3DFBBD8778211EF2BC359833
-:10AA50009E70157CEB9DCF30B888F89FBAFD463EBE
-:10AA60008F82362DCAF182F6405C55D87BF3B2D87E
-:10AA7000EFA9E5BF7406CF8976597AE0EB94E892A6
-:10AA8000A76B587D5ED660846F43B6B31ED64DE982
-:10AA90007B219405EDEFDF07E77968FF9847D02D1C
-:10AAA000051F443D5FB50E351CC4BA9EB7FAB7C248
-:10AAB000F7CFBF940B2BA1FC8630BA013C92A2AD1C
-:10AAC0007723CEF76643B018CEA9DCFCB51C356FF2
-:10AAD000B821BB14E16C12F826E0C4F7EBBBD275C9
-:10AAE0004F3C9BE32911F76C00EFB4831CBA1207AB
-:10AAF0007A5D258FD7B7B7F57F17D6E7392C930145
-:10AB000076C45F05DD3DC1F74794F97BF52ED8A7E4
-:10AB1000E7F79EED0FF7B0D27DE90FF7B2FE226B9B
-:10AB200000B68BEFF2477EF5F02F92F07DFCDDD082
-:10AB300079A4A502F249E61BF71D84252DB47C52A9
-:10AB400001F9248B53A54350DE6ACF990079242262
-:10AB5000DF7DE9A0D243404A531D95A88F9502732B
-:10AB6000099307E5C6587E29B4903F898AFAC4D470
-:10AB7000BE8AF727DBFB29DAA70CBA41D12EC69D86
-:10AB8000EA18AA786F48423017EC2FBA0E760FF603
-:10AB90005332E6DDE5BF74ECA61B687DFAD3B3F152
-:10ABA000DEBFE779FBF417CAF1F708BB293CF5547F
-:10ABB000913A37E2AE077F019DA9F4FB9ABD4F1C85
-:10ABC00072DAAFA2DF5F43AF17FC757587B104F887
-:10ABD000EB37D5F3D5FBE2CB52EAFDBDE14B0F3DA0
-:10ABE0004876862FFCDE2D35BE107227C73F564EA5
-:10ABF0003FCACE817D5B3EF667E06361E7307B4A0A
-:10AC000095BF6D88DEF1EE7AF0BFBF23133C57C7C6
-:10AC1000CFE755C1FFCB213C27CB5A7E0AF74AD15B
-:10AC2000E71ED03FE11CA893F67F398BEB4D35FB37
-:10AC30007E9A561C6A270D9F28DE2777489B15F5BC
-:10AC40004D39CAFADDA59BC3BFEF8D1F566DBF55A9
-:10AC5000EFC6F39B52D4DF7F15F3A9D81F83F97990
-:10AC6000D320EF843EAA2D7E4F0BF1D569BDC84F8E
-:10AC7000C177E6C9A43E5ABB9CCDFA9DBA3F06F304
-:10AC800059BE6DBF1F525862BEE0EF98FCFC30DE2B
-:10AC9000AF0DDFF7B86C89DF7B70EF4FFE0671CF29
-:10ACA0003D04F3372F5A19DF2F68FB4CA301F9D766
-:10ACB00087E14B8125A00179D25D1DEB81FCFCBAB7
-:10ACC0009566CCEB1C921BFC83B190A2FA2FEFB9D6
-:10ACD000C748F7ED8F7098314C9E76838D43EBD942
-:10ACE000D9F720BF9FB23FC6A7F90EEBC9A63A1409
-:10ACF000EA1B658CBE1701DE70B902BEF3BA9F92E3
-:10AD00001E3903FC00D60FF5D9BFBCEFDDFB41FFB8
-:10AD10003EC2E81B32E5D476FBFC30BB9D3CCAE862
-:10AD2000D248FF813EB7EA40B31EECB96BD3772B14
-:10AD3000E6CD7C53BA1E99CD7FB7A3773A3E3A85CC
-:10AD4000EE4BDD1E76CFC4A58E0178AEB537F95D2A
-:10AD5000B75D83F427EA5D1DF224C057F539710110
-:10AD60004F62C953DCE7B46ECCDF67809C5CB75799
-:10AD7000CB923D7A1B678B86D8C3C679FE354335A7
-:10AD8000FB5D4B36FF6E219FF7FE35A174302B37EC
-:10AD9000469173542EEB92402E57B2DF5D38BE378A
-:10ADA000A50CE07F5C223E3B9EBB6279C63359779F
-:10ADB000F0DC84F788A40ED286DF7728ECC8D97B34
-:10ADC000670F003DF20F6D4B8E3B813D64F7C3F181
-:10ADD000E6100FEABDC7ADAE4CF0374CE7F1FEE32D
-:10ADE000D66027F0E3E363622588DFD3FE3791B0B6
-:10ADF0007BFB8EEB5C99EC3E0891577CFD77BABFEC
-:10AE0000AD42BEA3740AC4AB17100BD89137CB4C1C
-:10AE1000AF25AF33BA14FCAE4EF227C03CE764CF87
-:10AE2000F8EF6C3AEF940D3F47BBB2076E5AFEBB8A
-:10AE30004FDF50AFEDB15F7749EC9E1207D3F76B50
-:10AE4000475F78600E9C73A376B644E7B3A47D1F7A
-:10AE5000DEC7A3B6AB7BEC9BFFA57F34D23E726D01
-:10AE600087F509BFB7DA4EEAD1CB857EF714CB73ED
-:10AE70007F63CC435DAB69BDE1A95884E3F9C70D9D
-:10AE80001EE0DFE7771AD0DE399F103CB91EEA2FAB
-:10AE9000E43B3C385A1E9EEF12F8BD4263FF00E4CB
-:10AEA0000EF9BD0EEFDDF8EC3103FECEC7CA27AEBA
-:10AEB000DB09F6D36799F6679F03FFDEB336BC0F55
-:10AEC00080A4B2EFA7717A04FAB2D3FD907F6546F1
-:10AED000BD61E58B69C8BFC4FE9D7B2C06CFC19FB9
-:10AEE0003F3C331EFC609D9ADDEC7729659307F8A3
-:10AEF000F0EA9D31A8F711BDFB15587FF9AFA6CD3B
-:10AF0000190AE3BF6F23B09EEE8E17D1FF18DADF68
-:10AF1000E872FD52473FC6077AE42CCB9B5D1CBA12
-:10AF2000AFD907FDAF21E23E4496375B244BEC7767
-:10AF30002AB7453F07FE5E36B3D76A84BF2491180F
-:10AF400053810EDD84DDFFB86D20DEB77B3E3B41D3
-:10AF5000D0313FEF28F0ED64EDABE82F31B07CBD90
-:10AF60005EEEB73C95CDCE055719BF54F84D6A3704
-:10AF70005C56D607B3DF6D2E6AB20F5D4BCBF51C66
-:10AF8000CE9A5457209B7EBFAAF5DE97DF46B83C89
-:10AF9000FAA33FC2B8874DE8A7216F33F8A9ED9710
-:10AFA0002A6390C71D5A147AEFD91D1F60FEC8D9B5
-:10AFB000976EC0DF2B5B22FBCFC23D595D66FFC79A
-:10AFC000B7D3F285C347715FD4F38D88C34B8CAF81
-:10AFD000D4C03A8642FE8AEB6FD948B78CDE4F6FF9
-:10AFE000CD47F8093F6DF7F9E8F69598A7E85FCCEB
-:10AFF0004FF42FDED3DA997EFF7F0189AF015A002B
-:10B00000800000001F8B080000000000000BAD58FE
-:10B01000096C14E7157EFFCCEEEC18AFD7EB031FDD
-:10B02000F1C1EC1A8C898D3DF8AAB1A12C36A60489
-:10B03000A17639225CCA3169C25188E3950D154A5F
-:10B040009118675B2E11C555AB88B469BBA1224529
-:10B050002D515C07901B61BA0435E0364D17052968
-:10B0600034B5E8D46DA8D5D8D8A569232424F7BD74
-:10B070007F66588F316D137557F6F3FB8FF7BFF767
-:10B08000BDEBFF3D26252A332B007E56A400D401BC
-:10B090004CD26719C0982F5199E1A5713F1F1FCB62
-:10B0A000441ED701E800B301DAE8CF6AA432B8B38E
-:10B0B000B391B631350A7C5C874C4EE31ACE3F9D86
-:10B0C000F726B86A683184E51C80C7C1FA6467B99D
-:10B0D000A01E6003FD8D473FDEF09BBBCC07B0098F
-:10B0E0007ADD50027043E8DE278900A3BDDF716B73
-:10B0F0005E5AB4C27FAB0C80E91F0893E5493DA7B7
-:10B10000530017D03AFA4C8A497DF566288BA09CEB
-:10B1100031BF5717AA00E629CC754BC6E92228A2F1
-:10B120007538AFC66B91F679D428EAB34F082F5023
-:10B13000D0EEA7A5782588C97DFB048D8F8FB277C7
-:10B140007640908E8B5786D300C6332460E94867DB
-:10B15000AB8910E2A1FF13D4532867DC0D6D7D7815
-:10B160006E6D8B10E9E376B8860DD44F00C6F5AB53
-:10B170002DC771C475298DCB96DE011CAF72AE4F01
-:10B18000DAE3E42F2902B7AF364B88F4563C88C780
-:10B19000269A477DA310170957FC6C9011F7260BD0
-:10B1A00077809008E897672CFE19D91B172B516FF1
-:10B1B0009FAC8B684FD305F40BF24DAEF825A22C53
-:10B1C00004B01FFD0BFDEED1FB7A100E79E52E9237
-:10B1D000D368B997A1ACCDB8EE108B009D2B430F6F
-:10B1E000A7C75882EBF17998E034047E1751849F09
-:10B1F000D31510E6742544385D053D9CAE865E4E41
-:10B20000D740825378341E85009D74C07F2B15C9AA
-:10B21000633B8549A4B51B21D2EB7D108703164EF5
-:10B220000FC74167148F9F168795A0E57179D3F1F9
-:10B23000282CE3F13D1D0F0FC523FA2D056279443B
-:10B24000978221125D46818B729683E222BE05426F
-:10B250009C6FFD1F71683034975631031E2D33C724
-:10B26000C5B72C3C66118675493FF52B661DB0FDB0
-:10B2700005A86778E1837EB4C76B539BFFA1608903
-:10B280008829ABC2AEC5C8D734779520FFF3D8461E
-:10B29000936F6A7E2388FC1BCA97C3AE7C8AEBE659
-:10B2A0001AB70AD0CD36855720AFA5F82AA18A0A49
-:10B2B00047A940F1B3D76FE2AF75EF53FD98475AF6
-:10B2C000915725FB640F6286F889252234202D5E74
-:10B2D000157FCB8DEB5648DAF7291FDBE5B84F41D8
-:10B2E000DCF776B7E602DA7B5832D77B709F5C9D3D
-:10B2F000B40BC7F514E4FBFACABB58F0E1E7A3DCD2
-:10B30000D32457EB9EA703E9718EA9A6279B73DB75
-:10B31000B04E8C26DC704C499E7332577B4D413CBD
-:10B32000412E05F27B816CCA19ED2B2F27BFF42B20
-:10B33000661D85EC400DE136911BEEA7F5E36966CD
-:10B340007CF5530CCE7E383594D0796586F1F10FBB
-:10B350005101DC3FA8681768BE23F55E29D5A5DB3F
-:10B360008BDE3B64049271CAF0FCCD687734043103
-:10B3700089D79125FE5B5847017D3089FE1CDF8E01
-:10B38000721087DAB01675E3F0E7364FD463912276
-:10B39000B957B85CC9285E84FBBEBBFEA664C6591B
-:10B3A000A11967561D1AB838F88D02930DC394BCC5
-:10B3B000EAB878F75F7F40FC3AEE78555A9ECCA702
-:10B3C00097BAC0478BBC8EBA61E75963BF272EFA84
-:10B3D000885FB09DD62D7D6FA884EC5A366444D327
-:10B3E00048CEC0FB05A61E565F087DC23E4B5F6877
-:10B3F00015A93803749E13631EC4AB93452EA71181
-:10B40000FF1A5375D4FFAF32C6473AAD0F79F3D167
-:10B41000AE5D965DED83A70EA521DDF5F2936BA0E1
-:10B4200092D2C1CDEBB7825FCAFF3DA7DDC97ACE0C
-:10B430007FA323D0CE0EB03F7189E2A0BDD7B9AEB5
-:10B44000038EFF9DEA4EC7D43A8F7A7DA2A465731E
-:10B450007F59FD0AA885A0BC9DD65EB2C34B7A0F6A
-:10B4600048310F43FA832ED54FBC953F70E3391E08
-:10B4700097F67A78398BFBDECEA7AF1D41DDB3920C
-:10B480007855BDEA0911EE55AFE686C8BE2A09B661
-:10B490008539DE311EC755181B0CE3E9F58C89A0F0
-:10B4A00080E7BC3E50A6620585370F86E0CF7393D8
-:10B4B000FA755AF9D42A9E6991300EEE3C057E4CFD
-:10B4C00049E81CFC715446BEF328D00AB843BF506B
-:10B4D000CE9D112146721A076BF2C8DF67ADFCF4EE
-:10B4E000E409A04CC1294599054A5992B7F1F5588C
-:10B4F000FE492DCB74CCA7A98F38F6A737049DFB46
-:10B50000F550A2A29EEAB1B93F23F4A863FD61DF22
-:10B51000CAAB14974B133BD6102E59ABAA1DF3F5AB
-:10B5200020F3FB435DA1578DE17EF8D8ECE70DF8E1
-:10B53000E5FD002222D9D764007C0FFDD138EA72E4
-:10B54000F83DC5C078C47529D7A7F81D7F3C8A93FC
-:10B550006F08601C50221542E1D43848E2ECBD8FE0
-:10B56000238F83415C4438A74931BC723C80533DF2
-:10B57000CC4DA7F9BAAB22C438EE5D6A1CC7678709
-:10B580009D78E7B639F1CED79CF816EC72E25B14E1
-:10B5900071E23B67BF13CF80EEC4AFE448A363FD05
-:10B5A000BC9E66073FFFC46AC7FA05B1750EBEFCB4
-:10B5B000F426C7FA85BD5F75CC57F5EF76CCDB7105
-:10B5C00035DDEF8BE29D8E75D3FD5E73F559875C9B
-:10B5D000DBCF3A7EFF9F7EDE37CDCFDDA81BD5AB1C
-:10B5E000777D23C7290DBF986AD6A5567149224495
-:10B5F000FE5EE256C9A7BF53B25AD228DFAD3E1451
-:10B60000B6FA101C3864F2569CA809F532D5D1EA76
-:10B610001BE1161FF2B546E43295E3FA919E96744B
-:10B62000858789E2C73861162E5F6A60E072E40B95
-:10B63000F23949DCD6EBDD623A2E6EBA178BF27224
-:10B64000494185E7ADB3E6598359D7D78652C0350E
-:10B65000058FA5D63850D346794BCC29586FBD07F6
-:10B66000F05E0E12DDCB0539160DCC749F544F8859
-:10B67000FC9EA4F17BD315A6B9896E9013C5D4BFE7
-:10B680007E92A3FD2880F5EAB6A02AFC9EC58C28F0
-:10B6900019354E8651D3D1AF87435EBABFE3DF8FF2
-:10B6A00060DD7DEE5A58AFE0EAFB0DD45FB3F439AC
-:10B6B00013D04E0710FF61E63F54837BDF6DFCA87B
-:10B6C00098FA8F474424B00E66F9423FA579FDF001
-:10B6D000920C5EA773D13EACA386A0F0FB83FE2C38
-:10B6E000E3EF818F48D8E229797AC4CDFB0E58EF79
-:10B6F000A32D165EF6FB68B375FE308AD885757A81
-:10B700004BFF158ECB9EBC517065F178E3F7A427F3
-:10B710000BBDD5C7C8A6508DBA6E218DDBEFA50233
-:10B72000F1D3F4C556B122DD98E1BE68D33D79234B
-:10B73000FC3D777FFF19B38F3C5CBECEE33669B723
-:10B74000297FF8682AEF2FC3478B9A8926E5DFE621
-:10B75000F2B744AE39E264DBFEDF3BE2EF09FD4FB6
-:10B760008E79237BC25D80F61BE7F3577E05F11BC4
-:10B770003BE7A9A77723FAED8FE4175BBEF1FCFC4A
-:10B780001574DE7FB7F36F1CDFA1830970CD4DDA2E
-:10B7900079F3E00DCE1B070D4EA7DB69BF336D2A91
-:10B7A000BD05652EF4CF049BA59E0C3C78CECEA0A3
-:10B7B000F93E1B5A9ED34C7D76A8487299B4D4E4C6
-:10B7C000F31B64935FB98AE8B8DB7B84DE99430C92
-:10B7D000420CE361330BFFF009B4BB3B47BB477638
-:10B7E00076EC9EA874613E7454195B19FA333F439A
-:10B7F0009BA47186D7BBFC4CAE6729DD3B4604BDDC
-:10B8000092612D587CB2702DDDD34766E9B7A9133C
-:10B810002F0AE6ADA57BFA8864E6C7F293C25A1DEB
-:10B82000ED58ECD7528228E74326C6793CFF82C503
-:10B830004EF17833A475693C9FDAE8DD45EF5D7A17
-:10B840006F8CA798D41F64DCBE0CA2B393B49C6A1F
-:10B85000258E2FB768AB78BC94D1FDE08407281FF4
-:10B86000F09C9040E70C7862A790CF41DDE99EF212
-:10B870002BC9BCCF57FFD213A7BAB143FE98FB69BF
-:10B880006E30C0E5649760E5C27DD92F786251D2F1
-:10B89000CF4814AF45FD7ADC787FA1F7F4759CC7DB
-:10B8A000BC1B7B7EFEC96353FC313768BE87E02931
-:10B8B00000733EF7159A6F1F1CBE4975E4B701ADC2
-:10B8C0008CEC1F16947AAA23EDBE4B12D59FC6A00E
-:10B8D000C2F7A1BEDC7EAC07DF641C67D9FF178C02
-:10B8E000D76D586CD2E9FD26682AED6F970D89E473
-:10B8F0006144F0FBDFC3EC1FDB9E78B102E9ED345D
-:10B90000B598CEB1CF453D1A498E6DB7AD4752CEF1
-:10B910007F8EEB1DF284237F6FBD74B894F264C8F0
-:10B920006DDEEF10678DECA816D9B675C87FC1C261
-:10B93000C55EBFD5F2A790177E2C887477E4DBE74D
-:10B94000DF5192F3E3ACE7EB1F90DF06BDBCDE4DA9
-:10B950003FDFDE3FDDDEF68B831C17B4772BD93952
-:10B96000C5DE8D748E6DEFD8C0FB2F56289FDDCEBF
-:10B97000F1A2844472C75FB95BACE0FEF60B576E70
-:10B98000501CB55BEF7D38EB7CC77B66E17B317388
-:10B990004A5DA75A37874FB3A9F7288FBDBFD0E5B7
-:10B9A000DC8F176601CF3B6BBD23FA297F67786F69
-:10B9B0009E4D08BC659ECDC37B1AF503ECBF54FFBA
-:10B9C000EDFEBBF79AC0E3726F00F83CE94579C021
-:10B9D0008CB7793FB0FF9F1065D8E7301E3A25ED50
-:10B9E00020C509685DBC3F8873BC2AC573DFAF57AB
-:10B9F0005BEF26B3DFD459FDA58EE490FE15E9BCBC
-:10BA0000EFD45AE7D6CB789F0952E9D6ADFF9B58C1
-:10BA1000FF5F38FA367F6FFD1B3AD0569240140014
-:10BA200000000000000000001F8B08000000000064
-:10BA3000000BFB51CFC0F0038AEFCA3330C42B3167
-:10BA400030742B33307C03E20E79841CADB02A07AE
-:10BA500065FA5F303230BC02E23740FC8E9174FDF3
-:10BA60006AC208F6525E06067520BF02482B0A30ED
-:10BA700030B001D91A40BC0BC8BF05C4CF80D84133
-:10BA80008881819D8F81C110888580581328EF0996
-:10BA9000A43FF161375F4B18BFFD8F0550F9A282BB
-:10BAA000A8FC3FFCF8F5B709E2971717223D4CDEDA
-:10BAB000AB911F1FC6EAB44F33D4C4371950F91FD6
-:10BAC00065181898E51818DCE421FC6B48F2114061
-:10BAD000B14F3210F66D3160DC01D55D66C06EEE9F
-:10BAE0001DA0FC13A07C0AD41C0004EB50106803BA
-:10BAF00000000000000000001F8B08000000000094
-:10BB0000000BE57D09785445B670DDBEF7F696DE8C
-:10BB10004216C2163A2C0A08D86C21084A67C3A0FC
-:10BB2000019A454407B5598410C822E27C3CC77984
-:10BB3000345B061DE64D147518079C06C380F35050
-:10BB400003460D1A980682A3CF2DB8208E336F9A24
-:10BB50007D3190002EAD83E3AB73AA2A7D6FA79B46
-:10BB6000E08CFFFBE7FBFF2016756B3F75B63AE7ED
-:10BB70005445359808194BC877F043D32512212432
-:10BB80002D9AD29FBF7F974EC82433FD974C48A172
-:10BB90006C23643821136D2468A275268EA11F536F
-:10BBA0000979B7460ACAD086D60B6413524AD8CF51
-:10BBB0002485D44BD7137231E7C5AA216E4224AF36
-:10BBC000972C1D4A53B78BCC8474CCDEAF2507214C
-:10BBD000CE1C0321FD589BEFE8DF64AF15FB12F983
-:10BBE00094A24EBA7C9AAFABAE7EE719BD74E55D08
-:10BBF000FC0374E5DD4A86EAF23D2A6FD0D5EFB941
-:10BC0000344F97CF0ADCA2ABDF7BCD145DBE6FF55E
-:10BC10009DBAFAD7AE9FAD2BEF1F2CD5955FB76DB0
-:10BC2000B12E3FA8F6415DFDEBEB57E8CA87841EB5
-:10BC3000D1950F7BE3315D7E44D353BAFA230F6F66
-:10BC4000D6958F0AFF5E573EFAF44E5DFEC6D65774
-:10BC500075F5C746F6E9F2B9E42D5DFD7CF307BA48
-:10BC60007CA1EB535DFD9B338EE9CAC7BB3FD395E7
-:10BC70000B3CB8B5DF25DDF7099EBFE9DA29C447DB
-:10BC8000814D889154626A26D5985A492DA636D29C
-:10BC900084E9864CFF9D64046DF074A08A50BC5BFF
-:10BCA0001968FDEF149ABE9BD3DBE91F08BD790923
-:10BCB000A1783B91754D269A6D2199E299C94C0264
-:10BCC000168A0A8E08C5B7148A771182A92B42F109
-:10BCD0006D18C5BB8819D34E914EF83D25E2C2348C
-:10BCE00035D215BFA74532304D8FF4C2B473C48D21
-:10BCF00069466400A65D22FD30ED1A198AEDBA4549
-:10BD00003C98768FDC80DF7B447230CD8CE4E1F7A9
-:10BD10009E112FA6EEC82D9866458A30ED159982A2
-:10BD2000F57A477C98F689DC89DFFB4666607A4DB8
-:10BD30006436A6D746FC98F68B9462DA3F5282E9C5
-:10BD400080C8626C775DA412D3819107F1FBA0C813
-:10BD5000524C074756607A7D2480A927F208D61BEB
-:10BD6000125983E9D0C863F87D58A41AD3E191A78A
-:10BD7000F0FB88C87A4CB3239B311D1909629A13D2
-:10BD8000F93DA6A322DB30BD21B213DB8D8ED46238
-:10BD90003A26F22A7EBF31528FE94D806F29807793
-:10BDA000214CBD91FFC2EFB9913730CD8BBC8FDFF5
-:10BDB000F3234D981644FE84DF0B2387311D17397A
-:10BDC0008AE9CD9130A64591B3988E8F9CC6F496A2
-:10BDD000C8456C776BA415D3E2C837F87D4224823E
-:10BDE000A9E07724476D0E0BFCEB05FF9FE93A793C
-:10BDF0001DE54BC46FF88EA6C446F16054B47E6C4A
-:10BE00004AB91DF24995E25512C5EF64CA0B811F6C
-:10BE10004EAC9482376751FC480D37425ECD31B944
-:10BE20004D347F176955017FFF42C276E0A77B47FB
-:10BE30009DEA1EA6F8FA6E5AA807456EF8417EAB39
-:10BE4000C29C7A03BF6D56C2F4FBC4D47D697E1BCD
-:10BE5000B4A7B43114D09B8E0FF84DD111FAB94B61
-:10BE60002101079DEA41E86114D60B99687E66318D
-:10BE7000F10EA5F5AB46996604E93855437D253E9C
-:10BE80009AFE22CB3703D2FF02E2A1F3DFCFD383A6
-:10BE9000C480E98B9914EF297DCDBCAF2FA3A702F5
-:10BEA0000AC42E1DC36174BA8BC90D5B6BA66FD01B
-:10BEB000D5B753081B4FD47F96F83E82EF813CD212
-:10BEC000AFD216AD47BF1F867A71BE7F1AEF7BBD1A
-:10BED0008132020AFF402763700BC827E2764E8644
-:10BEE0007999DDCE29F6C4F3FAD932D740A58F76F9
-:10BEF0009E419CDFCF2432A396F1978C2983B07F9B
-:10BF0000948701AB05FB9739FC45BBCF019EB4DD9F
-:10BF1000FB165F0B93A7EEEE08179BEBAAE042DB44
-:10BF20007D897051683BFBD5B74B9C56333813AFB6
-:10BF30001BE7C1BF57984840A2EB68DD620F6ECE89
-:10BF4000021C7623FF2C7171069A4A8141E57A49D9
-:10BF5000322C8190C63D492103AD9FB7C5BE19F46F
-:10BF60008096BCC0933E80F366956CA15556ECF963
-:10BF7000F9A1DFD07CDE2695500D832C487A229BD8
-:10BF800050B85D2B496CFC80776F1FDABF9F881F0C
-:10BF9000AF04FDCF27ACFF1689D151608B13E17A36
-:10BFA000BAA0A66A344DC3BBCB8A09E5E3A72858DB
-:10BFB000BB50FC5E60250AA494831B113E01F578FA
-:10BFC00058C817A467259A97DBE7E7435ED03F5D23
-:10BFD000F782A01ACDD3BF0BB7E9F31A78E1BEB749
-:10BFE0005AD4E066C4AB6E0C3E025EDE6E0C7E1C64
-:10BFF0005E0516356048457805810F382537C2A1A2
-:10C00000C4A28664DA4F0985239060C9EE87D30104
-:10C010004E0BB7595CC735E396D526EBF215F55DA7
-:10C020005CC73572F4E21BCF38804E1767185CC7C7
-:10C03000297F6B5EE64D394EB7ECFCB2224C057E93
-:10C0400094D566B96CBA7EF4F98BD55211C36FB72B
-:10C0500073DAA0C478B638C3E83A4E49F5EC362610
-:10C060006FCF2E33BB609CE6652E171B3703530141
-:10C07000AF454BAD585FCC2F51BF3FF4FC08A9230F
-:10C08000C7CCC0CF6959EFC4F513D293F2B911E907
-:10C09000A441FD12F0C64CFF7E67403CC2BCE8B72D
-:10C0A000A2560E98AE87EFDB75E3D176EE931AF9C0
-:10C0B00092986E1572528397F7430748A766DC671C
-:10C0C0003FEDD149FB6B516C6B408F9AC0F1A702D9
-:10C0D000EA517E50660E1BFDF4D3B93AB61F89C6ED
-:10C0E00039BB6C5B37E06B25E66A2330AB92DAFE36
-:10C0F00005404FE7EA56A6837C59285FFCB12F4ED6
-:10C10000FB5F08BA0DAAAD7A7919E4F3A4FDEAE859
-:10C110008CD8DAD64DF3CD063A94AD7DBFBF929858
-:10C12000DC29DF7E70DC683AFFF2FA0B4698C70420
-:10C13000C9FF2B292DBA7E09D64FFB29DD76C4080D
-:10C14000EB3BAD06AEF949D615E0D96E9EB68C93A1
-:10C15000499AF905A82249E975760EA757E2BEFD6E
-:10C16000534A9F67DE52C923741EE432AD45CB3378
-:10C1700079E95CE27300BC66D72D44FE7306F80FC4
-:10C18000C861529D0DF8718E188A607DE7C8FB8EDC
-:10C19000611AF8ED938C1C3E5495A5FCC084432194
-:10C1A000DCBA00BF32955435C983E1BB12E07C494B
-:10C1B000FA0EF94950427E56C2BE07887939AE63FD
-:10C1C0000DE34701FA07F2F756EBF9D3FCF5FAFC59
-:10C1D0003C32255DA1FC65DEE32AED91F2372DFFAF
-:10C1E000A3F07B566272773EA9AC72D1F96F34D25C
-:10C1F0007DA2F39FED224A37BABEB2573666CFA270
-:10C20000F9372526C7CE2EA3D3BF86F6D389ADBF77
-:10C210007469D0E81DD87E7DC7EA864D1F4DB03FBA
-:10C22000261F4B85FC256E251BB925557213AFBF04
-:10C230005B9DECB538A01EFDAEE1CF73D6E8D7D735
-:10C24000D1FA63D74BC863886FA5DB2613C033B11F
-:10C250001EB15F623DEA36C91B8C4307618EAF8217
-:10C26000AFB572F809BDE38B98FC3731F9EF62F294
-:10C2700002BF554EDF14EFBF9046003DB78E637886
-:10C280001236B2F30CAB678CD6FBE64AF54C9C5EDB
-:10C2900068BDEFAE54CF12ED4F31A4B5AF57F6CA1B
-:10C2A000732F07287E97BEF08483507C3CA354A74D
-:10C2B0007BE8F7455B563B004EA7958003F0E64CC4
-:10C2C000502E8A07AF510649E81B3689EE7BB9C06C
-:10C2D000FF31CB27827CFF728BEA7A84EE4BC53626
-:10C2E00053C844F7BBBC6E4131198CF9232CFFB302
-:10C2F0000B801F15F5EA51EDBE966E7D22DD6DC7F0
-:10C300007DE866001D9884BA119A96D79C18077A22
-:10C31000740569457C8E6D07E3C3D18EF2EB5946F7
-:10C3200067FB72716EAC609F4845DDCF2FC0B9B11D
-:10C33000822847B5785402B84CF5BC01067B2A9C8C
-:10C3400017C8483212F88A800309A6215F5EF9EC0B
-:10C35000AF061FA1F368AE79CB2169E04335248491
-:10C36000CBC5DA397F4DB9825C384FF1935CA36D50
-:10C3700017C476EE7A3A81CE34DBC0D2456AC83132
-:10C380009AC273D126D54331932C7AEE99DF3D457D
-:10C39000E98E7C62F2F4A5F05EF8DC814337D0FCD4
-:10C3A000C21D6A6A315B864D4A8FEE4705FD0B76EA
-:10C3B0001901FFD2170F18DD83D8F7873A45F761C7
-:10C3C000E18EBD4632A83DDCF26BF71AC3B638FBEE
-:10C3D000517B641CE8332B9FFDCA08FB7D668F44AC
-:10C3E0003A67B56F5FB2E900EA2F0027DC3FBE3F36
-:10C3F0006DFBD56E9F42135F1D8EF55CC0AF13EDD4
-:10C40000931D64F508C4E3E75FA5E397FCC9E481E5
-:10C41000F5973C7FBF03D6714AA964F8BC7175BA21
-:10C42000978E5BA206D25D98B2EF254F3F8078369B
-:10C43000FFE003A89751FCE862409911E802EBBBCA
-:10C4400077C36DB8BE79C48FF856B251F605810F27
-:10C4500028A468471C7A7881D3C3A9CD9453D2F518
-:10C460009D02FE087AEEFB32E78FF7A11EF9005F0E
-:10C470002BD56430FF8599ED5395C120EC72661D74
-:10C480009ED6FC0CF9E8D91EDECEAE810807C13776
-:10C49000919FCA070B3BB3FD61FC17DB51BCCB87F7
-:10C4A000EF50BF49F55A06EBDA717EC9C65FC2C7C5
-:10C4B000A7F3B682FE712A9DC989D8F5FDC920F877
-:10C4C0002395AF1AFCD2D035A3F39A87195D0B3AA6
-:10C4D0000F4E2E82F2CF3F64F403ED40FED07985FB
-:10C4E0003A63F9DE6912F2011309C5A3E71A95D37D
-:10C4F000B3BE9C7268D4DFE8BC15C9A9C513DA7F46
-:10C5000027843FEA25F31EA7ED34FA74058C87F5DE
-:10C510008CD1EF5951BA9DCFE9FFF740FF4951FA4D
-:10C52000271BD2AEEA7CB6480DFEEE29A0574A9FE3
-:10C530000137D0ABEA83757FB67DFFA13B295E7FD3
-:10C54000562BE854CF3763E9B464E70304F033961D
-:10C550004E3FEB5E49E2D229FD1E974EBB87FF5747
-:10C56000F8A680DBC118B8513EF8DB57DD89E1172A
-:10C57000CB072B0CEEB87C90FE7C48B2DBE39DC071
-:10C58000378167A5FF59D613F84D1B3E0A7C6BC354
-:10C5900047816FB1EBD4C32DB67C03F01B8D7EA019
-:10C5A000AE20013BDDE7D6DD329E135BDCAD8E4E67
-:10C5B00074DCD516720FE8D92D2E9E4F66F9D6344D
-:10C5C0006315F005F1BDD54266007EB6F85A1DC967
-:10C5D0001AFDF94883EC70D3F2709014C5D3AB29DF
-:10C5E000C7C5F1C32451F972845FA16CCB5C3A1CBE
-:10C5F000CE55B20774B7B9CB6F7780C9A2A5A1F7A2
-:10C60000A419F4FBBD6FCA68D368B13A06C3BCE88D
-:10C61000B95DE942E13B87EFF3691278720C5DD7AF
-:10C620009C06A617CF5DAB87C73CDB1223F019AA87
-:10C630007F46F140832FC24F50B2415F5E4AD6E23F
-:10C640007E95C6E08F9F9F77BAC81C7F869021FC9D
-:10C65000BC6180FE16733E55280F9C3483C2BDE535
-:10C660000D999868FE62834CAA609DDBA520013A73
-:10C670000EA4211E9653FE4034E7C266C0336362A7
-:10C68000FA6D7EE92FD93FA15516BDFCE9E0DFD058
-:10C69000B4F9E54FAE790DF2AF7C9CF929695F3FA3
-:10C6A0007FCFD777037F6FD963226827D9F3C7CCB1
-:10C6B0009F40FE559307ED1C2B4C5ED48FF7D8831B
-:10C6C0007DA1BC07B32FADDCFDD5E030CA9B55B8CA
-:10C6D0004F05323B475C6CF8DB7F4BA990D255810C
-:10C6E0001CDD9384FA75C5AB96201C3A5B767F956A
-:10C6F000EDB7FD70EB2937123FE29F9DCCD809F8CA
-:10C700009ACCEC6915AF8D7A66391DBFAC6EAF71EE
-:10C710000E2DCFFFC3B78381AFB4EC64FAC1793576
-:10C72000FC34F11032497E62B94AF7EB3CE86A5DAD
-:10C73000295F920FE5066CF1E0C2E0D042E100EB28
-:10C74000A27029017E98081EF3FE65E171E16E1862
-:10C750007F51C348226769E12279D9777BD02CE1E8
-:10C76000FAD9F73D5F0D06BEFB59ED7294DF1DADA2
-:10C770007B35AC3BEDFFA5754BA1AB5977CDBFEC3D
-:10C78000BA19FE0F90993C8AA583F678FECA8F31BC
-:10C79000FFBCDD83F3BD4AFA6FFC975DFF3FB8EF46
-:10C7A0003B25F4C775B4EFC7FE65D7DDD1BEBFC961
-:10C7B000F7DDEE027B6FCBEE6F338966FD1DADDBDF
-:10C7C000A0FCABF2B72BAF5BE83D4D864AD7703A81
-:10C7D000BF4F48F56D59347DCF7B29158EA3940644
-:10C7E0007CF1CE0D4315766E30819D092ADE260937
-:10C7F0007B5193CE8FDBBD04F58C89DE5FA07E403C
-:10C8000094CAA65C5ABF296F8EE711AC31F4B01FF1
-:10C81000F2D36EE479FD79EA5D897825AAC74ECC1A
-:10C82000BBF50DD0EF267965D4FF688A7ADF47998A
-:10C83000E3D8F71CFD39E28E9873C0ED33F4E5B709
-:10C84000F1FEA693C5AEE1145ED3BB2BAE2005D19D
-:10C850001DB9952AACE78EBB2452ADB157DE16D375
-:10C860009F4321DC4EF28FC16F6E1BFC16233C48A8
-:10C87000AEECD942AE027E84C1BB69DA9020D861A9
-:10C8800088E261F09B5EE6413B283F67AABCBD6A37
-:10C890005BD30474AB12FDF9529C1313C199F0736E
-:10C8A00027F6D32B0A77D52BE3B953D31FC243EC1A
-:10C8B000C7F7DD07B17FFFEC7E64C37EC4F19F2D17
-:10C8C000309B6F03FF85B99F84E7F6496B658C83C6
-:10C8D000310F94108EBE1C15FD3B270CBE6C509C76
-:10C8E0008B878D2C7F9075EB01F82CE0709C472A8C
-:10C8F00051EF2497BFFB6E0CF88D1042B4DC4BC88F
-:10C90000047A0E9937460A59E9FAE72B24E01C0A03
-:10C91000764D891CD5DA3583FA3CFCDC941EEDA7F4
-:10C92000A3FA89F8C30F9DFE95F2A3A37DE87905CC
-:10C9300052058757B4E7C47B1A181C2B1649C15EF1
-:10C94000884721D5A7F1EB7CC2F1FAAF0F0D433E2A
-:10C9500097FBCB414E3CBF7A07A0BE5FC1F5FD8B74
-:10C9600001B713EC35171B7A3BC11E73F18D7C8721
-:10C97000962F8AF4203F477EB0CC8C694B81542D92
-:10C98000C3798BB44E44395C6021C07762DBED52D1
-:10C9900084DDA592F919E98F9C0DFBC87EE6D3A62C
-:10C9A000CE4E9A7D5B3BE18C32B8FD3EC0CF518DBF
-:10C9B0009FE49F852F9C5B01AE072DE171BE38EB94
-:10C9C0007D8BC3AF78DFD746B0134C69C852012EB8
-:10C9D000530A645DDCCD7E859FA786916130AFE20E
-:10C9E0007DE31DA3605FDE903D160ADF8A860B465D
-:10C9F0007F1C7F5B2C3CA17FB00B1F533DF3009E3F
-:10CA0000C77E6121014A0FEF70FF0F2DF202FFA2D6
-:10CA10005D79C13EF6A1C2FC0AFD5566179F5A9C7E
-:10CA2000ABA6D17107D6B9868088E9CAEBF757DD86
-:10CA300058DE8DB713F5BA2E62F58E185DE5F1D686
-:10CA40003FC1C8D63F9F787E9C23FDEBED5BEE2F68
-:10CA5000EDA13C90EF0512F291F6784D903E2E1626
-:10CA6000494190BF708EC57CB184F2FF1D032B0F2E
-:10CA70004C61F252E07D2C9C2595C1598C9FA532CA
-:10CA80007C36AA0C3E02CE02BEB1F315F529BF1AC0
-:10CA9000ABB5AF4CAA1FF23CE827E50D920B4C7FDB
-:10CAA000E54AD808745851FFA80AFE823BDCAC5F07
-:10CAB000A2F8066BFDB5FD5505E7B37FE868D41F06
-:10CAC0002FAD65FAB177EE0507E841EF183CEF8D21
-:10CAD000067A7C57C678824470FC74D9B669058A98
-:10CAE000B6DF2C9CE7D445B92A98837EB468AFDAC8
-:10CAF00059834FFDD54E582EBE775DE41E0ADFE9FF
-:10CB000078388FC07F98C816DAC5C0DAA6BC245A18
-:10CB1000FEA3CA64868725B57B8D98CFC2FA623C96
-:10CB2000314E2C3D4D2B4ED2E5E7E487BB035C8AAA
-:10CB30004DA1259E3878DAA80A3FC9F794135E8A7A
-:10CB4000B783FF7F901317C679E3C06D9DDA4E3E21
-:10CB5000748E271F162F777706F82FDEDDBB331074
-:10CB6000C7E2370BD3E3C9878F96317FE0C7949F25
-:10CB700041DA328DCA87EB35F2619A05F123B6DDD1
-:10CB80004FD5AB940F62BFFE97F9CC47201FE2D080
-:10CB900075B5AA970FD31B66A17C983E4D266E8D66
-:10CBA0003DEE672AF77325940FB9E977605EF524A7
-:10CBB000C5C19B8FF8B904E00A298C0372E20F9C6F
-:10CBC000EFC7CA8B44FC7C8A51E2FEEA0EF8F9FFFB
-:10CBD00025380B7EBE989E5F400F6C8F8704F9F559
-:10CBE000E23B283F97001F193F5F7C17B74BC6F009
-:10CBF000571FF0D7E15AFECADA97FB993CA8A8CF95
-:10CC0000FAD54C5A7E67B5EA31D3FA7746F96DB654
-:10CC100096DFFE81F35B0AE74C579CFD9D3133891B
-:10CC2000B8F5FCAA0FF0A96343FE38F045C0FB77C6
-:10CC300064F4239EE072FCED217F1C0EF6F354A3F6
-:10CC400082F87382F3AFF3CB82D30A281DE7CF6556
-:10CC5000FA70D97619E1505EC7F4BCF23ED6A09BBB
-:10CC6000E6C70DFD1AFD810B77337F20055471AEA9
-:10CC7000661F17BE13AEEA06E59B24F467CEF32CBD
-:10CC8000443B3E59CFECC466FA87C57578D18E5CBB
-:10CC9000C6E1B5A06113DA9B1704F576E8B23EB79A
-:10CCA0009C81F380E0BF0BB7C5947B1E467F45197E
-:10CCB000D89B35E71099EB0FF7CAA1812F426CE79B
-:10CCC0007BEC5C15BBFFA25EDBFA4BFEC9F51FA433
-:10CCD000EB1FFEC3AFFF6AD7AD1A39BD0F25C38165
-:10CCE0003E4E18BC48EF81FFA2EBA7E3CC7DB46FAA
-:10CCF000676D9C510AA7CB770CFEAA2E50AF5CC281
-:10CD00007AF337EC38904EF3336BC91030D3CF5FE2
-:10CD1000AF978B6D72B8CE8D727666E50E69F64070
-:10CD20008037A9043C9B33D4E4077FEA414B2BF2C4
-:10CD30002F8177371A193E8FE6E31EEBDA5A80E728
-:10CD4000887AC9857411B2B0730585BF85E6F78FFF
-:10CD5000FA6A1C8737DA632AEAD9FE54D0FD00BA92
-:10CD60001AD7C0F3DB981EF6232A6FD01FD6B05710
-:10CD7000857625B47E0AF29B013A3F17F8E772D315
-:10CD800035FBB6FB08C3DB2D9287C4D9B77EF44FC1
-:10CD9000DC7DFB81F055C0E34623D7E7F9FE1DB4E7
-:10CDA00034150F433F94E4D90C951B92D18F72BC7C
-:10CDB000BA37EEE3AD1C7F63F11AF47BB7C69E343D
-:10CDC00019260EF19645168C73C3717B31FD47CB46
-:10CDD0004F62CFCD15A409F5980992FF2F8A26AE90
-:10CDE0006D3A8F3F117E5A4DBD5FA957A847325CFF
-:10CDF00006E093F78B784B881F4EC7B825FCD9DF28
-:10CE000023FBE39974BD97D6C81EF0FFDC6E701F3C
-:10CE10001A03F4FB884A002F2FBDAD7A99DE99845E
-:10CE20007C77D63BC7543085CCA23081FD9EF5532C
-:10CE3000C65F8F4167F4DB9FA8DCF282AF9ED48E81
-:10CE400080F8E1699EBD856EBA2FB70D3FB81AFC18
-:10CE50007053F35D870E017C1F9609C0F7E89A7C3A
-:10CE60003C9FDC7F9F84787D98C211DADF362DEB02
-:10CE7000D0213AEE5D6BD2D0AF36D37BA010F06CF0
-:10CE8000CE24BB0DFC6BB7F693895F03C7BB48D3B9
-:10CE90006AE0D7332BEFBB0DE65B42E500D8594B78
-:10CEA0001A0E167686FC06C9E3A6FD5704FCC6CE0C
-:10CEB000740B9BD65F3082BD631EAD07DB53B1811F
-:10CEC000D5ABA8913C16C0C7864791EFCCAB9188F3
-:10CED0000BEA537DCFCCFA0D9A69BF4D1B687B9A44
-:10CEE0009F0FEDA1DF9AE4E9E047AB785B66ED7355
-:10CEF00096BF0E7C691E6D478B4953CD7DD8DF826E
-:10CF00000D12C9A0FD95E464FD470EF4F7B6EA8161
-:10CF1000F28FF7FEDA08F3BE9B8ED785F63F470EF9
-:10CF200017427DF213C9B505ED4D2C4EB685D301E0
-:10CF3000F9B00BA32F89E7B91E28E4E107C65E8884
-:10CF40004FF3962EAF8275850369597004AAA8BF66
-:10CF50006004BDEE3885B39FEA6DC7781CDBFEC068
-:10CF6000316358C3A75A8DBDB1FDDCFA5CA4EF7BD9
-:10CF7000890FFDDDFEE54C0E1F596D094AA07FA803
-:10CF80002E9493FB575FFB24ACFFFC732AFA47CF28
-:10CF9000F708A33DF6D4069504E81C576E90916FF0
-:10CFA0009CDACEEC40F24615F3F31F30627EFF862A
-:10CFB000A9E3801F9EA2F0073CCCDF586884FC7C6C
-:10CFC000CAD74D71F8C73C7729E31731FC61FE7A67
-:10CFD0003DFDB7E3174BC631FE1EC30FCABA57A1BA
-:10CFE0009D2F964F54109BE00F4321DF14EA82F8E7
-:10CFF0005BFEB64A409F2B575C77AF07BC9969012F
-:10D000004F31A58BD001E06B9782923B40CB7F7470
-:10D01000CFAE1100BF93006FA08BB529E84F9D17CD
-:10D020009C857015F184F3D7EBF159C42FDDE1979E
-:10D0300089572B074A92885753EFE39F52BCA4E3CA
-:10D04000DD532F052D12E48FBCFEC070CCBB000F4A
-:10D05000CB977279BAD68E78FBF1BF5D580D78798F
-:10D06000F74312CE9F04FC552057CAD74B6EB063CE
-:10D07000CE7F88B59F4FDB03BE7CFC6B863F148F51
-:10D08000DD80E7E51B1E7D1DEBD7486EE8FFE34D15
-:10D09000B350FE96046482E53547503FA67200E324
-:10D0A00080F607E474C0F3F2552617ECA3C017818D
-:10D0B0007F4754E6B72766CFE0A9B4DD26A31BD788
-:10D0C0001D8B77F28C2CC4AF8AED2AE2474580E1B4
-:10D0D000D391E764C4C3FDAB6F47FC39BF454A80B9
-:10D0E0007FF9C62E807F4156DE867FCF4A1CFF180F
-:10D0F0005E9F5AC2F0311FCA01FF5EE2FA29213653
-:10D10000ADDE21F04FE0534778D74E2E25C037AA29
-:10D110001B4F8779DDBFDA82F3CEAFDA357D29D2B6
-:10D120008D8AFEF9FCAA7F4B073A9DA7B0380C0107
-:10D13000C73285C5E9B49BC7E3CB8D5DAE663E3192
-:10D14000F3D81B958B43412E425C49888EF3C7ED83
-:10D15000CF60FCDAB9DF1FC1B8C485AFD17DA7F5B8
-:10D16000CF6FB79310EAD341E42FA57532C685126D
-:10D1700025943D55737F44C45B2C7CC18EF02DDD1E
-:10D18000690A16D3F6A52F1F1B8CFEF015ADAF0351
-:10D19000FD047E2F31BB7C203C782AC4552A2CEE1E
-:10D1A0002356EE8E32317B4DF3AEA419A0FF48DB3F
-:10D1B000F6A23FA9B4F676D5A4B14F7A4C2A8E4B8D
-:10D1C000EBB17B2E74DFC18F08F39B3C483BBFE57E
-:10D1D000ACBF6719DD94D6ABA817956EDB8476BD1E
-:10D1E0008A6D1730EE35FF85E71C00878A7A591F54
-:10D1F0000FB54D0E99305E4B3E6262FC4917975455
-:10D200005EC7EE6594D7F2B89F98B898852FEC7EEC
-:10D21000394041B3F0C5AD0EA0A3B34D5B1C004F28
-:10D22000DA1FC6134DCA49106FD4519C51EDC3711A
-:10D23000E38CCEC23F2882DC6DD2C767926D8C4FE3
-:10D24000D15DCFF6C5B1670A7D65E1735F3C0D71B5
-:10D25000AFCD3B3F7B1AE6BDE8EF979E86B80DB297
-:10D26000C7E202FDA1E2F71F61FCA068B7D4C4CFFA
-:10D270003FCF6EC5B8CBF39F9850FF3BBFFB542602
-:10D28000E807E7777C9D0EF1944B7617A2FD61C904
-:10D290004BF99D499CF3AD48012F835711F719BBFA
-:10D2A0000FFBEBE4908DCEF3DC6113D2775BBC58BF
-:10D2B0006D198BBF73F338B1EDF1E36A457C537997
-:10D2C000DDD44937027FAB6372BC2DDEA9A3F8B071
-:10D2D0000FE97E5E7F15FBB69DC7FFC5ECDB39F815
-:10D2E00007DD9F274CFAF8B02FEAEEFDED535056BC
-:10D2F00017FF3E99A0E38EE025E276E798BC411344
-:10D30000D0CDCEFFC4383CD8AF6237C8F92F32C178
-:10D310006E795A6D457B60EB6E930BE2B64A777F70
-:10D320008CF471FEA58318174B78FCEC79D2F6C308
-:10D33000E21DB94DA2A2C6CEE2CA38DC21EECCED88
-:10D34000C0EF3CBE8CE1AD883B4B146FF691A91742
-:10D35000BF77C1E2E2CADC4D4680BF360E4DCA81BE
-:10D360007D3AA28BDF13EB8EEDCF057018A98D9B54
-:10D370004C14CFC7F5F1B67D627CF8FC261E47D968
-:10D38000161F4948F7A110EFC3E45D4550FA98C451
-:10D39000A1471137D9144B8FC1AB8B97EC78BEFFE7
-:10D3A000183CF69B98FD49C0A5F9727C7EFC19A734
-:10D3B0006F7A2E396BD2DC4BB9879F4B441C9998FE
-:10D3C0006F552D93BBCDDB985E184BCFE5DCDE1E91
-:10D3D0003BCED77C9CF2FABD8381EF34EFDBC5F105
-:10D3E0008DE173F9F623C600E7CF412D7F86FEE27B
-:10D3F000F013D9CCFAA3E7D8B8FD556CBF10B7BF6E
-:10D40000B38AF77698FFD926A6679CAD958B827173
-:10D41000FA3FC7E54FDBBAED463C57C90E2BF29FEA
-:10D4200025F69CC3CE54488D18BFB072398F77F85B
-:10D43000A92703E0BCD27E0B81F9AC06F868CE992F
-:10D44000AACB4F40CF51337CC3E1FC24E62BCA8DDD
-:10D45000A90612D4EEBF12C0FB91137B7DA5807C80
-:10D46000695AA6BFD7D1A4B80EA4D0FE9A0A240F39
-:10D47000E8B3EDF14CDFFF64AFACB38781ED19D6B3
-:10D4800075D163C0FDB41B422E5A85D82D4D197835
-:10D49000907313B7928E21DDE8DF7E64D9B61E70DB
-:10D4A000CFCA413C1294DB3D6DF75BB03F27898DBD
-:10D4B000B3261FF6C926FC0A3094BBF6825DC2DA99
-:10D4C0008FF483FB3B2E62F5C0FB0AEBF8BDC7B5BA
-:10D4D000763FCADB8474E361F75E849DC899A3E854
-:10D4E000EEC5247BF5F994987B90825FE3153A0AA8
-:10D4F000FF71FCDD87E442B67EB057F54D8FCE3725
-:10D50000398D7842503EC186F1CC361B9B9F982FB7
-:10D510009D0FF2030A26369F81E100E8E1745E3137
-:10D52000744CF0DE139DDFD198F9E9F4B83BCC5C84
-:10D530003E2844013E623337110EE78BFA38D300A0
-:10D5400081B803671B5C6939ED274B9A6482B80583
-:10D55000179C827BE37831EDBABBB4F7C5EAE11FD3
-:10D56000A3D05FD468043FBF5982E333E90CB80607
-:10D5700040509A8C008C5FD9443E84FAA2AFEE20D2
-:10D580009E3FCB6A0F62B901F2344D497217741B8A
-:10D5900042C8C36B0A0A32FA43BD5919060FE61B8B
-:10D5A00015A0A3C9FE0CC310987EC1AAC631846C15
-:10D5B000259503C0A2645EE56D7CA307E01541A735
-:10D5C0001D09781B0137B78A3C6580F0BEC2566BD7
-:10D5D0005BDE6BA67C716BAFB67C00F23500FC1B8A
-:10D5E000603C6FE32A88F331FB5699E9B893371A08
-:10D5F00090EEC6466C78FE20E14EC89F09A9B4FAA9
-:10D60000E2DC976EB3F3F07A1DF1F1AD3C1E79B216
-:10D61000DFEF81ABDE23B93C26AEF030B88FDD62A0
-:10D620009EFDA4594B871B2FCABDE8FC9E84BDA755
-:10D63000ED9D45AE5BFAD1F939371858FCACD9FFEE
-:10D640001BA8DFF721BF01AA8C25E1FB25E0C37FE2
-:10D650004EC5F98871AA76B37355D56A437005E251
-:10D66000AF5B02F916DDBF70CCFEB5B2FDAB3F82F9
-:10D67000FB57DE7084ED5FFDA6BD466E8F8773CBD2
-:10D6800056E2D901A6A71D6B661428745F524CADF3
-:10D6900055B0AF2A995E50DC1FE1FA425CB8F2F94E
-:10D6A0007504D7ADA737FF7C30E8F5CD064F5F1284
-:10D6B0008597A877C8CCE2C4A659FD0D304EC5E3C6
-:10D6C000E12A38FFBE7AFA7DF403F76DBE181A4CD2
-:10D6D000E7DB770C37A7F071B7366F467FE656C0A9
-:10D6E0006337B8EEFD2B404E268607C3EF3678D45D
-:10D6F0001D41F818204FBFEFE4F728F2EA252FC8A4
-:10D7000089141395A3347DCFCCCE31C7CC324F9939
-:10D710009DD1D9DC4B01BD386F9A01CF534E9E4647
-:10D72000D7CFE3FFCC8A4EBE88FD147844487512EB
-:10D730009C730A9CFE3FEBF1E6B1A45EB47CECF175
-:10D74000A3F7835D4FB4DBB28C78E66AEE4353FCFB
-:10D75000D9A56B57F88015ECA1A23EE065BC730219
-:10D760006D7716DAC138B08E5DC72FCA00EFABDD1A
-:10D77000D7D8EF4DCBE8787D12D38F2F97DD2B8A4A
-:10D78000FDFE77B3F03B327DC41BBDF7F777C08752
-:10D790003273D8318DEE6F79EE2523C06145D2F911
-:10D7A000D1F1FC9E89E6D174F95A1BC8E97D115369
-:10D7B000DC7B04FD2D4CBF7877D90C0FF8E11F16E8
-:10D7C000F704B83C2BE07CB7A04F6931635A9AB894
-:10D7D00031305870B959085FE8FC8A727628203FCA
-:10D7E0000B89465E32F93801F49187F36482716ADD
-:10D7F0002E5527DF6E057BB903DE05A96C84E16F2A
-:10D80000CED0DF039D34E68802EF158CCFA1E2581D
-:10D8100082F769F4E5B7C6DC139DEC9DE529E0E5E8
-:10D8200097F0FF415CE7A49C3B3C055A39A154F7B3
-:10D83000837D3EF8AD1C576F7CA00D3E3E84EB2BE4
-:10D84000160A9FEB619DB35631305D191EB1708C85
-:10D85000854BC19FE7317B610C3C6EBE5CDD98124D
-:10D86000070EEDD75DDD0FE4A6805F2C1C9AA02E7D
-:10D87000EA4DA620E8814D4A18E1D844E118E07E3F
-:10D88000ABC274CD3E8BF970FDE156FE3D169EB1E4
-:10D8900070A4FA05EA0FE307D9D10EF636C00BE300
-:10D8A00000AA3F34D1EF6FF651C923C0FB42633168
-:10D8B000CEF02682B022AF489505E8977131FF0A75
-:10D8C00095E70C1FFECCEC57C51136FF716E162F75
-:10D8D00043E17134061E4763F040776E899DE72B64
-:10D8E000F08F5171F083E3C1220B3FDF641237DC0C
-:10D8F000FFCFFE64B893F185F8F2716CC4D7D60FF0
-:10D90000D33BD8FB1C12F1B77D77D17E425E15E385
-:10D910003FF3CD2EA48F7CE24D81F72020C810E686
-:10D9200029E6354CF2FDD49206EF378D4FD1BE0F6C
-:10D9300021C617FB92CFE1974F027BE11C9A4F94CF
-:10D94000CFB5EB16FD5559B89ED593F4443F391821
-:10D95000434744FB13EB4B4921217C3F4432E33DD9
-:10D9600027FA5FC0D8293A9E881FB5DBA7545B58B9
-:10D970009C0461711221DCCF3C5E9EC7DF6922E608
-:10D9800084EFF290EF92A2F37BDA2229F86E029FE5
-:10D99000DFB937CC0188D77850F26F86719AA5B776
-:10D9A0000703BCA83E760DDED38F29BF74B8B11C27
-:10D9B000CA69BD79588FAF6BA1CCEC64F4FC8FEFD2
-:10D9C000A1B4E7E3CC9E46C94D211AFACCB332FA92
-:10D9D000BE95B8BBE37B69C4AF40DA6861F7D06E2F
-:10D9E0003EFC18EEDF5BD69BDF007A2B224105DF81
-:10D9F000F971E9F1B0433CED177BFEE5EFBA28ADD4
-:10DA00009900D77D966BFB801C13FAC2FB16DF1FB3
-:10DA100060BDFB2C8C3F1FF58E7817E4C2ECDC61F7
-:10DA20008786D3D460F6E1BB0BF7025E5178E6003F
-:10DA30005ED1B6FBA0EB2E88576F5846C0FDFB1891
-:10DA4000BC32337BDA6CCAB6601D796BD46FB4F329
-:10DA50006A8317978B1DE987A4912AF4E9F0DE0207
-:10DA6000C3CF7D165300F4B6BC87597CC41CE27F3B
-:10DA7000BA5AC2770074FAFA5C0BB37BCFFDB505D6
-:10DA8000E99C36DE50097E2E0B7FCFA11F7B77A746
-:10DA90006DBC6A4D7BD877733AE2E15CEE3F3C2E79
-:10DAA000B173CB5C4B21BBF7BB5EBDA8C5C7D8F13A
-:10DAB00013F61BD36E9FC4EC24FB5437C6838976C0
-:10DAC000E72D4C8E5F34F7DD60B8C27DF079E64E0D
-:10DAD00003959468FEA4C532239E5E20FA6B3B97A3
-:10DAE0008BF30431AF6EEC1E3D4FAC5EA11ED09F98
-:10DAF00027D403FFCC79C2F5887A60156DFF848145
-:10DB0000F9DF88E2EB3F59A30775B1327DF080CD94
-:10DB1000DBC54AD327B8DE48359CFE5A7BB5A897AB
-:10DB2000BE348F1C1B167DB74D52E80CF1DD0DFF86
-:10DB3000729043CA0C827281F29F7BE2C50BD9EDD1
-:10DB4000793D601C41970F1BDC35D52C8E01FDC043
-:10DB5000BEA5B351CF9BBAB404D396A397AF01FA35
-:10DB6000CCE3701E60E5F69324463792E41F60858F
-:10DB7000F87CAF6C073FEBC27A99FBF1D87B575327
-:10DB800027C869F0FD9859C5F3E13E3BDBEF63849C
-:10DB9000BD5B9377D0E4ABA3E965923BC1AAD13BCF
-:10DBA0002F9302CC938C74F46B8B7B8CC748169BA1
-:10DBB000EF1AE637B8B8260BE39BF7A97A3BD5589E
-:10DBC0002BD393C75AD9BECFE6EFDB019EC13B13DF
-:10DBD000B31537DA0D67478CEC7D353A0FC4438BAC
-:10DBE000BE9F22DE4F515B3F04EBEFB3C4F6A3B000
-:10DBF000FE393EC7C2FD354B7E31ACE732F14EB047
-:10DC0000221EBA15804FDEF0C6C3C0F73AE6F30114
-:10DC100009F87CC56529D413EC68752A9EDB9AB98E
-:10DC2000DE7FAE6E7FFA6C9A96EDF8C001E7C3BB5B
-:10DC3000F93E9D539AF03D8A452FC9789F9AA26F6D
-:10DC4000FA8FB0FD9C6C761F84DD6710F2EF866F53
-:10DC50007B77F7613D763F41E85DF9E64010E6B736
-:10DC60006FB98CF62A2A1F75EF9314D6B17B0BB1CE
-:10DC7000FAD812ABCAE338D93E2E71B17112D17302
-:10DC80005EC44A821A7ACE53DC0ACC3F2FE220418E
-:10DC90000AF773A737AF9B48F13C90A1E2F98F4A8E
-:10DCA0009B46D407A3FEF1467847AB91AFE740DD32
-:10DCB000D469F0EECAEBA472D5205AA720EC4F65C8
-:10DCC000C44D4F6FD9517DACD0A5D70363F5C4A225
-:10DCD000864757C11B2DCDF001C6379B30BEB89D7E
-:10DCE000FE68BE39AEDE48C8A3883F37BCF4CCAD71
-:10DCF000F02EC50D670C2E98DF34AB9BD153DD257C
-:10DD00007C37A19C84A64379799DEC0AD1560748BB
-:10DD1000DD75202F857C1770095DDE6FF6801CB0E5
-:10DD2000C8AE15B04EF36D3688BF18DD323015E43D
-:10DD3000DC3EB38AF6C93C4B5FDB1C0D3EEF4B6506
-:10DD4000EF091C48EDADFF6E5E771DC8BB5D3C9EC4
-:10DD5000ADF1E49DB630D69B9A8AFA9A90EF317A6B
-:10DD6000ACB0838DEF2BB7D9C1B4FA2F91373C6E8D
-:10DD7000A1E5B75EABE27DB88230F3A7B693EF972B
-:10DD8000FDABF83945F7BD88EB0DEDE47D14CE3AD7
-:10DD9000FDF4552BD7CFDC6410E89BA1CBEB16E24A
-:10DDA0003DDA8624D70AB433307DA6E578E9BA098E
-:10DDB000F0FD6D99D94D2ECB4847FBF62CEC19D6CA
-:10DDC000D02F9514B86F5F0EB970FE35BA2F5F9ED5
-:10DDD000B07A028877B5D7C5F79705399C425D9927
-:10DDE000FD3DD095BD8FC1CEA33745CFA34DC00F0C
-:10DDF000E07D19101B191B8E18E1DC7C8EAAE888C7
-:10DE00005F74D1805F3779C3B24B339FE356662F7F
-:10DE10009866F51E023E122079DDA872424AACDEF9
-:10DE20005C880F6F9D4C5C9BE97A769FCE93549AE9
-:10DE30001FB325CB23D1FC4E5038816FBE24072160
-:10DE4000CE6427DC67A3FD2E68AA3666D171037500
-:10DE500032DAFB1770BBF969359099ACC18F5F2638
-:10DE6000B1714FABFEDF423FA73F31A11DFCF4096A
-:10DE70006B5C797B7B12E397AF71793624C98DF99E
-:10DE800050F3ABAF77A5F30A455C4300EEA5DB2E5C
-:10DE9000C8F09ED28D5C2F2B7EBC6915D86B266E88
-:10DEA000685580EFF882AE4210B553B6795490436E
-:10DEB000D3B6FB54D8DEE97595189F34A3BEFA009B
-:10DEC000E4EF0CD562FEBA24FFDF00AE37AD69DDAA
-:10DED0000FE8D2A79A28F8BECFE74CDF4AE3F3E871
-:10DEE00015F1EC732236E71A00BFDBC67FA84901A3
-:10DEF000957EE22A363EED4F4D82FE2A5BF341AE1F
-:10DF0000652E65FD6592BDCB9DEE68BF632F3749D9
-:10DF10005A3B42DE4F16211E3DFDE0A29E60670F78
-:10DF2000FCC944FA66719A4885EFDDF9FDB270FFCD
-:10DF3000293ABF74C8C4F08698592AF0C96B66782C
-:10DF4000E4B2825EF0E3272BAD4017A93EB7511B28
-:10DF50007798B7AE78C09B80A71613DAE3BE1CC2D1
-:10DF6000F4F62F1FB505F9F97400E0AD9053B363D3
-:10DF7000FC2E513A67784FBB08C23C444AA4152E88
-:10DF8000A2CD935006CCAB4712E3633546F74C184D
-:10DF9000AFC66A72C178B3CD7D8DC097DAEC9A3C7A
-:10DFA0002E6D34D72B779FDE9702FBFAE590E5992B
-:10DFB000A02F870CBF413ED4115E3D66F566273128
-:10DFC0007D0EF57B517FD749EB409083AF097DCB28
-:10DFD00033AB27AC57B49B9AC4F4A89DDC3F27E829
-:10DFE00020B58978370D445079776AE0313189C995
-:10DFF0005191EE54DD0146472C9E73A73D64EE0D12
-:10E00000F4BAAB37E6537DC4E681F895FABE1EF04C
-:10E01000D3503A9F98A489DBBB91D37F6A532BD20C
-:10E02000DDD59E034670F886945A4E3F04F910D011
-:10E030000FE3CFA16EFC1D1EF4FB015FE0FBD34597
-:10E04000CAC03870DC67B1EE544EF7F773BA0638C1
-:10E05000407939CF8BF2451C5E85F240A7366EAC15
-:10E060009DDC5E9A41403F2C5CDA15D3724E670B03
-:10E07000CC8FA29D7441EAA3681F4DF55663BAA0E8
-:10E08000A01ABF676C9885F8B1607DFCF7C5DEE229
-:10E090007AEFB9D306F68E94C1DA15F04F9437595A
-:10E0A00055CE0FFD0F023E9CA95BF7E46077D4DEEE
-:10E0B0007BA686C9C112AB5EAF5BC6F161F7E7FB19
-:10E0C00052005FBEB4544FBC13E8648BEC5A0EFB95
-:10E0D000585328B9E3E09F16CE00D78A9A2FD0AFC5
-:10E0E0005A4EC2E8573DC3F53137F79F0A3F6BB030
-:10E0F00086F1D7D32AE3EFA7A51409E803F83BF08C
-:10E10000D9D3271EC97C10F048B2A35E037C738765
-:10E11000063F166EDF54D595FEF3A6CBECDE4E48D7
-:10E1200021362D7F167822F86DECBC37F17D1578FD
-:10E13000383A2A87362571BB686FDA6FF9A317D191
-:10E140002EFA32DFBF1AC037A0E73502DF8618D8B3
-:10E150007B697A3A1EF903F1EF5D8F3D95897687E9
-:10E160001C4AB7F0BE1AD0751CBCD8C3F1F231AB53
-:10E170007F17CC3F96DF9F91FCBF4DE91D6DBFEB34
-:10E18000E42D03666BFA59CFE1F1A5EAEFE98A03C2
-:10E19000AF285C4957D8E712BA330007B241726919
-:10E1A000E3DD533730FBFE7B9C3F88EF222FE03DC1
-:10E1B00036FAAEDC7B494CEE1B4124670499DC2720
-:10E1C000865BBA821C5F60F5DE827696470D04DFBF
-:10E1D0005195F210DF536B9E38F9ED70482DBDD08C
-:10E1E0005F42DC06F0832E78D88DE7BD15BFB320E3
-:10E1F0009E9D4862F1112B6A54C4B7336A35C6E15B
-:10E200009D3951DA13FC2D814F981C4A044F813FF0
-:10E210003B39BF1178D76B2DC3BB1AC56B05BC1337
-:10E220007254E0E7992D370F057A13EDA378E31ABE
-:10E2300022F06616FDDE6B4D5886FDA1FBD60A70F6
-:10E24000E8BDB615F957A27D137E34B17F82AF0FBA
-:10E25000B319747E03838DCD3F3581DF3F2AD7F418
-:10E260007C98EE87641BA1C77FB85A29E8A9B90337
-:10E270003AB8C7C6DE77AEFACB1CF4DF0B3F8CF0A2
-:10E280008F8AF1536C0C1F12F9515ACCFE4EB618FE
-:10E290003F9F1BF93AF39B88DF33B0780B8B63DA2F
-:10E2A0000545C02F8E5B83DAFBB9D72AC4AB0CA51A
-:10E2B000D861CBC2795D0BAC82E653971A491F7ABD
-:10E2C0007EFA72D4DE4607AD3FA1355C7C3D5DDA57
-:10E2D0002E6378DA24B0EB126F29E8136883073CC9
-:10E2E0006F66FD1257AD6E9E03389CC5BE887527BC
-:10E2F000925B89F6E31E1BF77BF1F2583A37F2F294
-:10E30000D39C8E3AA6D38013E8F42612580EF1154A
-:10E31000F4A08D71696D744A0FDED07F01EF577CD8
-:10E3200017F938745A604BD3D06924CCE894D3A33E
-:10E33000B346F5C6D34FA6D8983C72D614E6823CB5
-:10E3400071FA30AC9CFE30BA5E40E91AE83500F450
-:10E35000D919E0C9E8AC97B71AE3197BD530BDFAF3
-:10E36000CB64B6DE05377AF7C27BC80BA85E2FD127
-:10E37000AAD59CAE13C33DE494987C72023FB96960
-:10E380004C381FE4AD1BEC169DF1575BE0A68C1DCD
-:10E39000438221BAEFEECB84F189134FDDFD20F0EB
-:10E3A00087476D78AF49C89FB424FF3CC0CB44F485
-:10E3B0004CF1D20B76A7C55FDBD8F92F81DF7BEC60
-:10E3C0005203E99382785EA1C5F3B1BE5619E09A73
-:10E3D00092E4CF5093E9F836EF38730FBABE2CAA07
-:10E3E000DFD2FC4F697E2D5DC7D64E61C2F355B6B4
-:10E3F00051FFB83D2EB0F6A6D7C1BFBF25C9FBEF70
-:10E40000308F16B32F00FB7C53B75619E395AED26D
-:10E410006F5F017638BA9EA3B70DF8DD2CFA75F65A
-:10E420001DBE2A2815F6E291DC5E5CD13004EDC8F1
-:10E430001ABBF12F6D57B01B7734AE83D33DC56F38
-:10E440003CC739725A65E08B82AF6CB475E2F81C38
-:10E450002670AE10F4057C09F45A113F00F6433BD8
-:10E46000FA2382887F90770E8DF29BB5D586B8F11E
-:10E470004DDB6DB6B87C9434FCEDE507C53B8A8C6A
-:10E48000AF6EB769F48A9AEAA3E94C4F65EF92DD63
-:10E49000CFCFF2EB5678DEEB931ABDD73CCA640CB3
-:10E4A000C07B8AF460E67669E223A506296487B812
-:10E4B000BB6F6811E0D137064CD7FDBBAF280BEC22
-:10E4C00025870D9E1504E310103E393D09BEB35358
-:10E4D000CFED9CB9C76C5EF0EFB74866E49F2D475F
-:10E4E000AC01909F2D7603DAC71B779B902E2EF5FB
-:10E4F000B1723B465067EF10FE9A4B6FCF4901BE99
-:10E50000FF24F75B3E79C735687F14765945A13003
-:10E51000EF04662976EF326F6957B49B0A3B6DBAF8
-:10E520007996C4828458FF8A99AD2B5DF14B60FFC8
-:10E53000DED4417CC35F6D46A1EF1E06F8563C1445
-:10E5400036C27955E8BB421EF76CEEB517E21C7A6D
-:10E550001631B3D8A6668301D6B789A25172567B0D
-:10E56000BC12F8B3A97D1CC1099B865F4E5ECDE24B
-:10E5700008DAF2BCDD6F791CC1D8E3475FC4F7F25B
-:10E58000CCFE8F74ED0AD3ACF1DEE19EBEF4416C9B
-:10E590009F08EFA71BD8FB3BB1DF4D76CEB795CADE
-:10E5A0006E78FFE9AF3F4E72C7B1C74CFFCB6CFC32
-:10E5B0003D11B1F6B3E8F8FFEE29A0FB26D9DBFC4C
-:10E5C0009499E037EBC84F193BEF43AABF473CF99A
-:10E5D000141B4727C66BDF9E9DBFDAEA19897F8728
-:10E5E0008DF53B54D36F8E9DE93DD32582F1EDE44B
-:10E5F0005B82725AE009857B373B2DCF7EE7D830AE
-:10E600002BFA715A65E003970EF7E98EFEF304E7E3
-:10E610004D311F42FC7DE3C5694C877776E2AC6FD4
-:10E62000849DC9E7E92AF3374877F4C5F3FF748B73
-:10E6300049D2C6E567D9251D3D097BF33ECB48BCD1
-:10E64000BF0876F978F08BF5C366818F348DC1C52C
-:10E6500013079F84DF4FC0B92AD79BAB30BB18DEAE
-:10E66000434BF532FE995A44D07F3652F2223C6E2B
-:10E67000B6337D69138F7FBBF4368B57CDCE75E3F0
-:10E68000EF71A272A2D03E02E3A95E3468E2A9044F
-:10E690009E543D47E5B1CE6EC8E84A9C9B93391F16
-:10E6A00076C17B129A7AEE87800744E540F755667B
-:10E6B0005D3E73898B281A3991ECCDD0E5BBFB5CAC
-:10E6C00056382F752F72EBDA09BC13F17CF8930AD8
-:10E6D000EB76A1DDA9139FCF48C98F78037C0DECA1
-:10E6E000C1F7F27DA2EB9D037834B6287C498B37C5
-:10E6F00062BD1DADEBE83237F2C2E3CBE87C295FA7
-:10E7000098B3366B7906C2DD45E01C71729919BF6A
-:10E71000DFCBDB273F3E0BEFC926AF72A33D36D9D7
-:10E720005BF93ADCE349AE74E3BD81B9D59204E705
-:10E7300074CA67B0DDC6652E4CC57EBB68B9648BF4
-:10E74000BE239E487EADB2DB74FADE15E4D72AFB09
-:10E7500088F6F2CB60F6BC097EFDB206D90D78B121
-:10E76000B2B813C6F7AEAB65F7D9F637B0B8BA751D
-:10E77000D3991C11E39E7FC989F2E2BCF87D29DEA2
-:10E780006FD2A7A0BFFF9B74E0B39B6CFEC7EC1ACF
-:10E790007EB9AE618485BFAFAC933FF4C705F71B6C
-:10E7A000D0C726819E34648DD21BE9FE29684FE6CE
-:10E7B0008587597A039EFA3F8077482F1DFE3C13C8
-:10E7C000F64FF8EB843F4F8C23FC7D92E47F463B71
-:10E7D0007E7B7F9EDE0F253BCC18879B23B3385C66
-:10E7E0008D9C25B08F2B411FA478B6F28815E1B11E
-:10E7F000F25B466F749E2FC0388DF66CC41F214F9C
-:10E80000E93C07BF4BA2F3AC30B4666ADF21D5CC3C
-:10E81000B3FECAF38C8953E5F392ED0ACEB785585F
-:10E820003D30AF7AA3E7B01FE4EC792BDAED5ABCA8
-:10E830003758E03DD916728305DE99DD6EF337C295
-:10E84000FECB3D5A1DA067EF6F18D61FE69BC8AFE1
-:10E85000DA6CCB7B03E645D7F716F20957F8D2F30B
-:10E86000EEE8FAAEE08F7D0FDA7D8FF51FFE3EEB0E
-:10E87000AF80DF8FC10CDDA84F499CEFC6E295D475
-:10E88000B0F76B880FA2F4837199814C125C49E157
-:10E89000543588E117994BF8EFC7D1E3C1269BEFB8
-:10E8A00034AC57D0DD15E0D30CF37EDCE63B0FF53E
-:10E8B000611E70CF83F299562EAF5E341AA27A543D
-:10E8C0004A0AE357ADC904E36762FDDD76FB94AF06
-:10E8D000A05D7A3FBFE41AF8BDF09C38AE08BF10C7
-:10E8E000C63D887BA665E09785F8AD3AB559FF7BB4
-:10E8F00074F470D86EF359A1DF401E7B2F0EF06ABE
-:10E9000025B9223C1C0E84873FD941E1615729BEBD
-:10E910000050726665009C5BCC2C1E60E772068717
-:10E920009677181C761D37201E3F410620DD0D35D9
-:10E930005CBC1BFAA7FCA31BF433A6B55682F36F8D
-:10E94000E712B701F86CB7568F6CB832DEF6743048
-:10E95000BCEDE560FB703FECC3B0B7995DE60A78AB
-:10E960007B0D8CF73DE07EBD63C4D5F3178A57C39A
-:10E970001C1ABCBADAB82889DF8F8CED8F9E87D03D
-:10E980004FB0779709F951F94E761FB47CCF293CE7
-:10E990007797BF6A42A42C78D5C2EE35D4B1F2F392
-:10E9A000B9F1FDF9631CEC9C55567B9F472F77030B
-:10E9B000F8FD97DE8BAE3E72D43F9A3281DD13585C
-:10E9C0006911F1A0CC4FEAE07896D2C3E705B9927D
-:10E9D0005248F0BE80C3C6E206DBDF0760749BC608
-:10E9E000DBB95C6E09E01D7B3F200DDE8B667E6E21
-:10E9F000C417D960F580DC4F298AA9672B423F6A8A
-:10EA00005ACC7D82390EEE4735920CE023B596F84C
-:10EA1000F7805A1D42AFB3E2B94EE1F36AB41BD995
-:10EA20003B2E7633AE7B71324929C6BC82F23CB6AE
-:10EA30001F91267B0DBA7B26294556DD3B0A69BE10
-:10EA40004EBA7CE7195D75F5BBF87BE9CABB950C3E
-:10EA5000D095F7A81CAACBF75C7A83AE7E16453812
-:10EA60006DBEF79A5B74F5FB564FD1E5AF5D7FA79E
-:10EA7000AE7EFFE06C5DF975DB4A75E5836A17EBE6
-:10EA8000F2D7D73FA8AB2F27D0B35F72B0F38E2C4D
-:10EA9000F46CFB703FDE2BB29B2593E63C57CDF721
-:10EAA00023D7519401FEC755F6711970DE6C4CCE18
-:10EAB0007686E3F42BD27FF41CF6BC436F3FCBE3A6
-:10EAC000F6B3F3FB281781DF57B19FE201FE7E26E4
-:10EAD000FFF30E6E0F98E586FAFCDD0AC583EB980E
-:10EAE000EE30A35D2CB6FF6A873BEEF94936785CC1
-:10EAF000C552627809BCEC085E2FF3F9FFB3F03A17
-:10EB00001413F723CE6FB1EDCE390C5CBFF637018D
-:10EB10007F6B3BA79156D987E7B4CFCF0708F05357
-:10EB2000827A4B223D408C2F49BE4FA09F587EEAEF
-:10EB30005B3A8F9D330D5EBC8F95E8FC76CE117BE2
-:10EB40007E2B9C81FB916CD4C1E9D3363AF7EACE97
-:10EB50006FAB92B3F1FCB64AF5665CCDF9ED5307A5
-:10EB600032270A77373BC78AFD347ADCEC1EA75E72
-:10EB70007F69AF6F53F947D7B90EF43809F4B2146F
-:10EB8000A67FEF64F7FDC5B857A16F13E755E8DB23
-:10EB900026E259A3C8B85F4627AC7F5EF87E8BFC9F
-:10EBA0000FE9D74EE7F7907FEFAB1E8CEF7F7F82A8
-:10EBB0004CE0DD954B4523F19E74227CFC90DB5F9D
-:10EBC000DE7532F87664BF787F59C915EF57BC3FC0
-:10EBD0009EC5514E89795F778493D1CB2427C7078F
-:10EBE00013B3439C7BD98EF1F0E76EF9087F2FD2E7
-:10EBF000B9BA61C303F87BC03C4B206E2660B3A357
-:10EC00007D6FCAF811C397DB3578C47FDF58FE2BC0
-:10EC1000EF38C07E336547EFB4802D31FE4CE2EB18
-:10EC2000234AF81A8C977EED0CFE3E9A29BBFAA671
-:10EC300031FBA23ECE2CD6EE33656939E29BC897F4
-:10EC40004508C695B5E515769FB82CA2601C5A17E5
-:10EC5000279783DC2E94105E5709CFD8EF029EEFE2
-:10EC60008F3FC3EEC55BE2EB1B3F71EAFD16B1F7C8
-:10EC70005212DDB798CDF7E952D128BC5F3FC5E805
-:10EC8000EE7B35762A01A7A6CBA792802FEC81FBDD
-:10EC90002E71FAFF9193F1B33DDE13296096CE35C4
-:10ECA000B7E603FEE7723B789C78FC0AA0BBB19103
-:10ECB000A21F241E7FA993DBED78BC7B81D3CDFD01
-:10ECC00092FA78FC8EEE134D36C6976FD3A2F0FB06
-:10ECD00008E8F5FE8D2AC6EDCDA7730880FD6D937B
-:10ECE0008AF6B70F2E9B08F8414E6D509F8138B3BE
-:10ECF000928DBD373E4EF325E34DE8B799BF89BDF0
-:10ED00003342C65B82E07F2DD9F4403ABC1BFE192A
-:10ED1000A5DB4554699ABFF1098C7BF9E0F823180B
-:10ED20005F7D06E8997E2FF9F667D301FEBB8CD58F
-:10ED3000D70DA1E9A2ED92EE7E44698D459717F1BA
-:10ED40007B62FF8814BD37E1A6726433DF2F21AFE9
-:10ED50008745FD5D9B9DCCDE8171F0E513D8FDA854
-:10ED6000FD27D9F9FD401F16DF171A7F7BF110BA76
-:10ED70008EF169EC7D96D8784002CE31783F85C718
-:10ED8000EB8EFF4469BBC7C2CABDB642CDFD80D77A
-:10ED90009755E2BE8CFF35B39B8CCF6271ED09E3D2
-:10EDA0000433DAC5F9F703B9D92E3E307A7FE76824
-:10EDB0003CBCF9430C5DEF3FC9E201E7BDCDDEC7C6
-:10EDC000EA886F7EC8E7FDC1F101773D4FE1F1416F
-:10EDD00011E3E21F5CBE7935BE3FE39308C4659E34
-:10EDE000BA1CFF9E58B253E84DFEB6FB34B03F53F9
-:10EDF0008B16B4E5812C6FF3DDA7BB6F73F5FCE6D2
-:10EE0000CAFC64A593F91162F97B2CDEFF9FE2EF47
-:10EE100053C61FC884FBF734FD1DDEC3DFC1F86392
-:10EE20002C9DC7F27331AFD8F996450CBAB8E16999
-:10EE3000C0074668F9B911F93C55EFD9BB30D94A3A
-:10EE400070A5847A80E4A270186E0BA6E4D221FE2D
-:10EE500007B1ADBCC8008000000000001F8B080097
-:10EE600000000000000BDD7D797C54D5F5F87DF3C2
-:10EE7000DE2C496692C96412929084093B15718018
-:10EE8000B008A82F04421482032AA2069D84256C90
-:10EE90002191AAC54A9B810444441AEA8614ED4094
-:10EEA00041F95AF41B116B6C834E04115C6345C528
-:10EEB0007E15C3229B2811AC1FEAC6F79C73EFCDC9
-:10EEC000CC9B4C58FCFAFBE7173FEDE5BEBB9FFD22
-:10EED0009CBB4CAD737D82BF2F632929EC369F9D6F
-:10EEE000B1B3F87755383D611F69760E62ECD138C1
-:10EEF000BFCD990AF5DECC1CC912191BF856BDE22C
-:10EF000087FA271536B93E46BB1FE34C8C41BB2D13
-:10EF1000665EBE05EBF50D97A739F37F8C83FEB6D1
-:10EF2000DA20857A8CD99C877A3396C74C2C496530
-:10EF3000AC58F1A7E17815B69695A5503A6FF7B79A
-:10EF40001628620F5BFCE95A1E63814C8B77636E57
-:10EF5000FB713D4EA804EDD2168C6407073266B5EE
-:10EF6000B140DC00C6148D05CC03701CFF2213B425
-:10EF7000D72633B65C61AC19E686F559EF74134BAE
-:10EF800063ECD736467F81910C27C30207E28335B5
-:10EF900030CE8F4CEF8970F889E9BD705E9F30BD2F
-:10EFA00037A672DC5AB14ECDC4FCCFC58047A953F9
-:10EFB000E1E3305F4F9F83B1E923993F121E321D79
-:10EFC000E7D4A85EFE2337E5B440F9E7FB6FCE61D6
-:10EFD00090EE787848524B8CFA32FD437595771451
-:10EFE00034BDBFDA4F6912633ACEE781EA99DE5148
-:10EFF000DD1973421EE735DDE2EB991CD1CF65CEFA
-:10F0000064C253E2E55B9ABBBA193BB442752A1E4F
-:10F010004899A908DB1F0C26156DEDCBDBB90DED6A
-:10F02000F83C55A633D60DD66DD7BE6B11B03BCB91
-:10F0300070BD8CFAED689DA5024F16E6B5617BCBDD
-:10F04000816B6CAC2BF4A7E84ECC4B7AB81C4640D5
-:10F050007AB8173F5D0E74A7F86F71523B3D459625
-:10F060009FCDC5F18B282FC767592EC6323A861718
-:10F0700053743FF67394E9A598365802973861BDEA
-:10F080000DF16C662C7A2E17F8EB21D6C598DD7938
-:10F09000F812311ECC6F63823E1BFB3969F3CDC57C
-:10F0A000F4CACEAD352AD24D9C53D46F61887728EF
-:10F0B000BF1DCB597A0BBB16E07D254C763964FF1A
-:10F0C00071F400F3009C125B0F310F8C9F88F88B5A
-:10F0D00001376B32E7ABBF3356149BEF142A5F281E
-:10F0E000E6B901F8C5E40EF3CB53D0EEB9BEC8774C
-:10F0F0007EC177FA350CCA37FCD1A52C87F2AEBA9F
-:10F10000C784F4E16E667A10E121E02EFBDFEBB4F8
-:10F11000101C900F9573F0E1AA8BE4C30D7F1C6760
-:10F120008AC379FE96797B78B0DCB3D806F927E6F6
-:10F130003BBDCB21DF6D05101AD4CF5E10BF5E85BD
-:10F14000FA6B9D7C9D5D1E628BE3A076EEDA560D18
-:10F15000E5C3B885CD9A0DEAE7D6B668289F5EFA72
-:10F16000ED9A1CA4AB639F5FA33AB0FFAF65FF00AD
-:10F1700020E0F7E14E8E4336B4B40BE267B393C39D
-:10F1800057AEE38FF1FEA7089F55AD0556A896B37D
-:10F190008069282F8F29FE3FA774C37EE32707FBD2
-:10F1A000227A39BDBD74F8789F32C8BF24F95D1941
-:10F1B00099C9D2191BB1C14CF01CB1E1E15B11DE60
-:10F1C00023368CD114A8F2841652345C6795AE05B0
-:10F1D00020FFA6D34CE31FFB7C761705E7FBB19518
-:10F1E000F58801DF9D62FD9B9D5C7EFDC3129B6ED9
-:10F1F0005F6D933B9C9F863345CAD757857C4DEC0A
-:10F2000006F09877F72992AF7F717AA8DF27B4FAD2
-:10F210009D99342FE60DC0A7D99BDE23792FC79186
-:10F22000F5E66C5EB714EB65DDE1ECAF7AB05D4BF3
-:10F230001CD2CFB7711C5FDFDE1D1F5CA410FDF771
-:10F24000F75D1A830F59C86A4A270CD878AADB4C95
-:10F250004301AFADADF928F7A0CBC5C89785C91E4E
-:10F26000035ED6B53AE3915FCEA70F0E087C5E2809
-:10F270001D6E4FE67C03F25F473C05066BC11AF832
-:10F28000BECEEE3F8AF23FCF1E4CC9872AB5E7D7E4
-:10F290009B2710BEA0374FFE2CBD29F4A5D49F6D2F
-:10F2A000E5029F35427FC6D09B3FC6D29B6E16BCFF
-:10F2B000BF1FAC879D307937B2F6E32E14FD9E8CCC
-:10F2C000D7D564187F84C27C386EE289034C89905C
-:10F2D00043F3045F6F1174F0948BDD3621C63A66F8
-:10F2E00009FA3495B45A5AB09F4685E8BFFD7AB9F9
-:10F2F0003C01B998928C7CD605E4A6D25E6EC6C05D
-:10F300004726CEB3F35BFA76249261C91B1200FD47
-:10F31000E7C2474E32E143EF82A984FF80B3EA6D32
-:10F32000BEBEEDE1DF3399CF7F9843EF81F54F0B00
-:10F330003EEB082F8392393E0A93B93DB3C521EACB
-:10F34000C519EBDD96CCE13C35D9C89711F81B9473
-:10F350001C037F520E9F8CF70DC575FFFDE89604C8
-:10F36000A4238927297FA2F115E6B345B41E807333
-:10F370003EB68FD63FB27DB41E0AB70FD07CD721E0
-:10F380001D21BF211D79B89E58D7373C3F49E7253D
-:10F39000627D67E3F5625C4FF43C9D274CCAB9E699
-:10F3A00099DCEA5690FF937527A5FF386A52705E84
-:10F3B000CE564DC17939857E8CD683202E04DDF062
-:10F3C0007EB6A3DC80F1977E39351DF1BC34DF9F1A
-:10F3D0005E05F5AF71E8FE64E223BD14E131C5A11D
-:10F3E0009761FA631CC7F3A0647D1AE693851D1527
-:10F3F0003DCFB9627D00CF39D84FE22816407D78E5
-:10F40000D5197B10442C8000E60DFA2151778E44EB
-:10F410003D96B89679914E53125A9BAC906F7D9859
-:10F4200079D743BE67C063B2A27EBB435F8CE9D28B
-:10F430002F55B23B97E6B3E062EA87DBA1ACB66B2F
-:10F4400090F437F05B24BDFE5ECCE3F7C99C2FC17E
-:10F450000EB92799E3F977984A3B44F2514776452C
-:10F46000041FD652BB0BE7C3FB71FD17C1877F4852
-:10F47000267F42AFA3799E870F1F0DF3E12358FF2C
-:10F480007C7CF8A4E0C3ED22ED880F5F13707B3322
-:10F49000B943FFE3C9587CE816F420E91DF910F5DB
-:10F4A0007DA39827C8CFBFC6A2F70BE0CBADB1F8BC
-:10F4B000329A1FDBFABB40FAEFC8FE1BE23AB7FDF7
-:10F4C000D76CE77897FC0CFCB253F0CBEB825F76FD
-:10F4D000717EE17A399ABFDAF44D2B97138CD525DA
-:10F4E00020FDC879EE97FC13AFBF17C967D24F91C3
-:10F4F000F093F5FF23E8FBA848135B0F30940B0053
-:10F50000B77F45EA8DA704BF048632E217F0B746FD
-:10F51000A25DF9D209B0232167777179306275F362
-:10F52000766475A6D5254C74740CA72B5D1E01CF8F
-:10F53000D87082F1BF8885B746C49BBDBD3D1F8D85
-:10F54000AFBD623D761787C7CF9D87841FCEE3325C
-:10F550009A87C7B43C42CF2B2E45D21973417AD536
-:10F56000A85695D1BC4209E042B5C9539605EDF3C2
-:10F57000DAB7B785DBDB5C30CFAB7468DF37DC1E16
-:10F58000C62779D7ED0E90676427EB26D44F4B73CF
-:10F59000393D44D3FD06B41FFA46E0AB2E93F0B5D7
-:10F5A000D2E64FC3F96DD03C26B4EB362C732A015A
-:10F5B000C263553CD28FCDAE135FC7904359AE8B1B
-:10F5C000B3073C2E2E87725D1720877A0BFC801CB8
-:10F5D000EA85F5EDE791434304BC86BACE6D0F0C86
-:10F5E00013FD5E29EAC790434370BC6839B4D5C6A1
-:10F5F000E110834F8763FD34A73E02F1047C7A85D6
-:10F600002B42AF41BBAB30BF52B45F5167EA4DF6FE
-:10F61000338BF7C6F233C6B9EC063BE50AE13FB0DF
-:10F62000C6EFFFF6DBC18C5562119FE738314FF210
-:10F630002736D41D4843FCC39F21AEF2E062EFBBE6
-:10F64000DD116FEFA80CEDD0077FDF62417837C482
-:10F6500027F6639785C7ADFC0E083205F0F29D8949
-:10F660005289C7798D8B0632F023F20FFE90837694
-:10F67000E5C9FDDF517CE484BDAC04C7DFB18DC7B3
-:10F68000494EBF353505ED7339FE7CC417CC6BB4DC
-:10F69000DAB73E04EB3DB5CBE2457DAB32CFA323D9
-:10F6A000603E95BBCC2C48728AD9B0BE994F9799D1
-:10F6B000772D6D561331AF05447C43394BFE8C27B3
-:10F6C00009E9D6BC4B65C887CCCDCB03CCB6E82CBA
-:10F6D000F89B49434DCC13110F49D6E39927223E9D
-:10F6E0009152E432E4537D9986FA9D2677359467EA
-:10F6F000F87F6528EF3C7380219F5D35CC50BF0BB0
-:10F70000F83B91F9DCC03586FADD964D34E47BD4C4
-:10F71000DD6CA8DF6B7599A1BC4F70B6A1BC7CF7FE
-:10F72000F316F4AB2FD934DFF0FDD2FADF1ADA0189
-:10F73000409ABB039D4C631CFE97352C36D49FD654
-:10F74000327B1CD26DFFD07263BB3AF3210ECF0027
-:10F7500043781E617E0BD299C65A777606B8CF0BD6
-:10F760002ADE10549BD590DB0DF9E18B378A762980
-:10F77000FD605EAB793BD9CFACA0313F47DD4CFC9F
-:10F78000138DE74AD635C9938774A0B2A012C6FB81
-:10F790009C4DC6F60CE35DD06E8E584F345D1C61F7
-:10F7A000558F8C40FA08E8CDDDD3C2EB36B3FAC1F1
-:10F7B00021FC2EE8C429E844AE5FCE5FAEDB09FF32
-:10F7C0006139287C0BD2D98C0685AD51DAAF6F66D2
-:10F7D000E3AAA59D63AC93B1A005FDEDE8F9875CB4
-:10F7E0000E37C5AD72580EC6AD583BFEB0933C3EC9
-:10F7F000B5560D5A81AED540EF28FE30AE3F1A8E79
-:10F8000017CB2F1E01076BBA915FE23CF1D1F436A2
-:10F8100038C4DAC335A1B7918F241C255C1DDECC1A
-:10F820009874E581FF387C75F64BC2F704C2372126
-:10F830000CDF9336FF4994C3A7F77EA312DDF95B73
-:10F8400006A21EEB482F391C234FA31C83FA3958FC
-:10F85000BF3201E46212F473E0879EC86FB29E6FFC
-:10F8600041997714C84545F1FFE08A888B34EBAAAB
-:10F87000230FF035A741F5A21E3EA9D9972997D1AC
-:10F88000323DCE3454D2126F1C8F126F4AE3F6FF12
-:10F8900028002F68E3B760FCB5C86BC3798227479F
-:10F8A000714E05DC9BB309A467E353283EA2338A5B
-:10F8B000FF9D62DE1AE8AFC6F1B74BCE130F494C7D
-:10F8C00021FFC29F118FF6436BCBE967B17BADD9A6
-:10F8D00089E34CF0FB693D43708260573327C029B0
-:10F8E000225E04EDD2B1FD84C7FF9880F6F04B870D
-:10F8F0004EA9A45F3E71933D2CED83F6F67580F41E
-:10F9000097B4D7C13FEA92C2ED985CECAFCD3F12FD
-:10F9100076B5F4733AEA07EC8EDE68CF74942AAFBA
-:10F92000AAA44F5B9578EFFA18FA342F4589A94FAE
-:10F93000417FE6A5A446C4E3EE3CBD13E51DC07BB4
-:10F94000087E7738C0AE512EC8AE198EF51F4D48CF
-:10F9500024BA6EDDAD067B418353364F920BE03601
-:10F9600052E85945031DE20AB7ABB2B9FA6A03B1CE
-:10F97000BC4F128BE1A7C87424D64B89882FC619B7
-:10F98000FDD1A503F8BC8A53B83D739FB09F4AC50B
-:10F99000BA2B310E97128EC3554EE671E687A3E25D
-:10F9A00097A5290EAABFC43EB214D7B3345721BBC2
-:10F9B00069A9A218F6919253F2A9FC16D17F29F4F5
-:10F9C0008DE33DD595CFCB1DE5BF678BFAD929BC1B
-:10F9D0005FE0A43E886F8BAAC684E78C143E7F69E3
-:10F9E0003F49BE192BF8A650C8CBAB7B80BC24E6A0
-:10F9F000D2C78D86F251A29CA96BF758A17C6C2FBF
-:10FA000033433A1B857209E5BCD37CA0A57758CE59
-:10FA100017F6AEDA81E2614C3A7C8F902745CCD75D
-:10FA200019E9E06A8FF1FBD83D85C7905FC7328D39
-:10FA3000FAA1EFB91CAE09AE30BDFF3EA54D1E794F
-:10FA4000CE025F87E2FD0F1663FCE16DD5BB9EB56C
-:10FA50005FEFFD026F2B849F82FB48E87FB844DA9A
-:10FA6000BE3E87CF6B76DFFD044F0DE0097C1BB2F5
-:10FA7000B4D424E1381F301A2773A6DE84F9413E3E
-:10FA80000FC338F1D25C66F7227DF637511CC4ED06
-:10FA9000778EB240DEBD963C1566D658C031202C1C
-:10FAA000179E4EC925F8AF60354D49503F69EDD7D7
-:10FAB000AC2BF90FCE514E9443D358CCB8E646B197
-:10FAC0009E098F77D5D00F4BB2297A30C63A368A45
-:10FAD00075805CD880F2E12ADBFE814AD7B05C41B8
-:10FAE0005796FEEF9029B85169DFDE662F781AD756
-:10FAF0003F6826EB20CEC9E731DDE6ABA77A7B3C39
-:10FB0000B43F512EE5F33413D3806E6E126473D379
-:10FB1000DAA6FF903DF0C3D9B3AAB4B319F5CF70FC
-:10FB2000BFA07CAE2388FB07E58DB9018A0FCD54B9
-:10FB3000685FA3B2F13D1FE6CBF3F29C24D7121409
-:10FB4000E5706F32D11997631A3B2CE945158B820A
-:10FB5000FE270BBD20FD79D0032B1200FEE56BD7ED
-:10FB600035654095FF01858F78DBABFAF7DE03FD45
-:10FB7000DE00CA69C1004C35564271F474EAE77A76
-:10FB8000D14FE03BA61CB685C7BDA17137AD67AFAD
-:10FB900099056C404CE6917C68F36F93687F15F48F
-:10FBA000298D3BC956371AF5DC494B6B3F2FFAD7E5
-:10FBB000DB3ECA0E003D7DFABBD30E0678F84C6BD7
-:10FBC00075E0F7A30BDF77E800BF4F17AA4588CF92
-:10FBD0005B85DE90F03E22F07EB9DBB70FE17D5B06
-:10FBE000F58F83FD91719205A924EF670561861158
-:10FBF000F6C39C4D0968D1B4E52BEA530C79A907EB
-:10FC00002AACAC2A565CB0B39BFBF3B336AFB374EB
-:10FC1000F6E0F8FE561CFF28C85BC4CBD1AD8E20A1
-:10FC2000FAB3723E659BFB5BD0BEF8ACD1CA42E82A
-:10FC3000AF68CD6666E77244017AF00BBC47CF73BC
-:10FC4000E7CB09D4DFF487B9DC2985B116005CFD68
-:10FC50008DB348BE44AF63FAA79EC24E00EFE9F7EA
-:10FC60008126F7F0FA0B016FFE05F77E8DF65AF448
-:10FC70003A4B034679337599312FE560B9C037B0F7
-:10FC8000DF32B47BA7D719EB9537DE4FFD97A39CE6
-:10FC900092DF61FDC96E61870E6643502ED5D8BBD9
-:10FCA00026F9CFA1774E548381DA93B1E3D5364A52
-:10FCB0008F56334AF7A5707A9DDBF8DE5D4837F33F
-:10FCC0001A9EB3603FB5C1D1CE6150C5DA081C851C
-:10FCD000F625EE1743D329B85F0CF3ACC18964E075
-:10FCE0007EB2AF9B1BDA9B9D51FBC7627D2502FE56
-:10FCF000CCEE22FA2AC1F5F4C3EFDA3791EB39B52D
-:10FD00006BA00DC7EDEB16F27608AC4BBDF075C9D4
-:10FD1000F5C8F5C9F20A15E82C467B49DFFB84DCFF
-:10FD20009AB661C2D24C0045CDB623E41733619731
-:10FD30006B023F9A7D39D9E51A03BB9BAF53D8E5D7
-:10FD40006C0FF2ADA4B3683A2A473820133B793BD5
-:10FD50009BB0D7DBE8A7F1018287C433F0473ADFD5
-:10FD6000C70BA5E33E1ED0D1A1283A32E4A7D7198C
-:10FD7000F35F995B7290BF815E0E45C2F7ABA8F34B
-:10FD800023321DEEEE4AFC36CDA3173AA17C3AF39E
-:10FD90002D75D2FAEB082E47B5BA9DF720DF6DE03E
-:10FDA00074FF99C07B83DB57EA267DA5F7437D3539
-:10FDB000727186EA867AA52B1427F2D3D4DAFE85EF
-:10FDC000C88703984EFD4DE9C0DEAA7173F89755B8
-:10FDD0009999059465198C8172AD6CAB1AE4712BFD
-:10FDE000DD5E0C789829F05071DF73960C486756E9
-:10FDF00095733B20C8F905E04A76C0EC154DE457F1
-:10FE0000835F1193DFA41EA8A8379657B215848785
-:10FE1000CA287BE0F792CFBCCC8BF4E8BFCB615310
-:10FE200092CEBF5ED63E6E42719553BB7A907D787E
-:10FE3000CAE3E984F5FC89FC0C8DA2F987E07780A0
-:10FE400013E9A3D6450941B47FF79F01BF0E6D3278
-:10FE5000A77F8805E0D2F2AF6CDA6795F429D75313
-:10FE6000695B41F459C98C7E63293828180F2DDD50
-:10FE70009812C4FD71E8BF5F03DA151BCD64370427
-:10FE8000D8FC740674E65B62267958D6904C7E6B7B
-:10FE9000592DDF4729DB9C1C54B93FBE07E31012E4
-:10FEA0000FFB6B0B2C1984A75C2FEA35D66036D07C
-:10FEB000B7C44FB4DF377B59D3CE744FC7718108B5
-:10FEC000FC1CEA003F8722F1B3250A3F6C610A97C8
-:10FED00033B7BFD603F78D4E55C579D5187E84D478
-:10FEE000432C0B08707038BE569429CE3469DE342A
-:10FEF000C4E7E91583085FD1782AFA692AE183FD0E
-:10FF0000CBC130EE3AA51BBB6D227CBF4DE1FC316D
-:10FF1000A5E6EA22D4D76FBAB99C7917E4936E614B
-:10FF2000EC3D904F3AC8A7F7416E61FE83EA74CA70
-:10FF30007F54EDA1F4E3EADE941E12F6BCE41B202C
-:10FF4000000BDA51EF09FDF89E5BFA4177A4A3E9B3
-:10FF500050F4D3FB834C406BA98159D78CCE66EC0F
-:10FF60005ADDA8EF265F6FD4672D6667613ADA7DA8
-:10FF7000F729B4BF50E61B6EA8CF348F6502FAAFE5
-:10FF8000BD0786BF933DE7B14C047EBF695C8AA183
-:10FF9000FEA4659D0DF9636E0FB71B8BBA19BEDF0A
-:10FFA0005C7289215F7A06803010A9D94578B8C380
-:10FFB000C6847FEDE2714F71BEE49BAA219D7E0352
-:10FFC000F3FDE62D339547E343E275DA6A13F3C395
-:10FFD000D4A6AE86B541BF87EA004FD0EE8BBD0EEA
-:10FFE0008674BC74F3C07786427EFF6633C52FF7F4
-:10FFF000D7A6AC44FB68FFE6D4448C8BFA97AAC220
-:020000021000EC
-:100000008E705A5884BC2AA85D44E74E4A83562F06
-:10001000D90B3B024FC8BC4741BE679C5FF6A84165
-:100020008C5301FEB87FFFB495E2F247C16E738234
-:100030005E38AAB05A4C51B12441F9BF9B5383C8D2
-:10004000CF453FA97A3AD2D3D37162DF45A1FE8E64
-:10005000BFD763FD72A22F4F7D88F8D64AFEC0D469
-:1000600016BE3EA60CE88CF83F9ACCF4649844C5C2
-:10007000FC8FF66980A7593D9BFB85A05D496E28E2
-:10008000F5466877628399CEA160BF4EC857FCD50C
-:10009000BA8ECB11BDD3844B23E119EC87EB9E6262
-:1000A000F265A7027D1D9F11EC47F26C612AF155A4
-:1000B00034DC0F59FC04DF00F28112968F613EE3BD
-:1000C000FB6920D43250CE4C357BD3503F1D5A6152
-:1000D00026BB13F447228E0F9C4C747C48F314E229
-:1000E000BA0F2DCB6528AFE4B8652B54F23B90FED8
-:1000F000A8FE2AD50F3602937A2AB04CF1B34EED02
-:10010000E9E6D7B70FE984EB89B66F65FA15F0AA6F
-:100110003FC25E98BD4DF5A1FFC1F25AB4EB2F8DE1
-:100120005C472DDF5F48E7FDDF21E4FADCAEAFEF8F
-:10013000B39B50AE774B42BFE2D81E95E8EC58D740
-:10014000BAC1E9DDF0B8C8AB837F03F92F8A038712
-:1001500035C83F61F55F930AFDCC31ADC841FFE87A
-:1001600064E3C195C3A1DDF167CC5E1C76F6D3B321
-:10017000BA50DC5DD8D7EDE55628539CF3C9500042
-:100180009E733CF5A4B73D9B61105A7F90FB49429A
-:100190008F3B1F52D096620707399663DC622AB004
-:1001A00047A4DD7DD0CCED8292542EA7A47E5F23A0
-:1001B000F2534D9CAED9CB0AF96DF067D003522EA5
-:1001C000CF49ED4AF5DBF432AB27793503CFB1C027
-:1001D000FAE66EB20683B9D4C6897C3E8BA3873D0E
-:1001E00095EA213936DBF2CC23C843E5AC99E67DAC
-:1001F000DC1C9CD19C8BEDD7D5BAA8BDD94BF15353
-:10020000A14F6CC040288FCA05DF55D429C110F119
-:100210000DD78BD345FF0CF54C84FC6AAF578CFA95
-:1002200064BAD0A3D35954FCB5CEA8DF7C09DCA9AD
-:100230009D0DE3A2BE0CCF0BEC6380D90C7F70E761
-:10024000789AB7E20DC69847396B0DA938EFCD3CC7
-:100250000E1F3DAFE8755CE83C6778278C4ACE8B73
-:1002600018376ADE12DE14C08DC08384FB8C0087D1
-:10027000E78C4685F0F5B9B0CBE08FE2C612EFE52A
-:10028000CC371ECFD7953F04F232374C076D7AFF3B
-:10029000B920ED377CC1EA12ED40F773573F37E9DB
-:1002A000726CB7F63DF22F4A5CA11EA664C65202DC
-:1002B0007B96175D11639F21CA3EF8A5E083B3D7F3
-:1002C000068B76008FE91B543DAE9FA11EB597F6B5
-:1002D000C1CC40C08271C99922DE77BE795662BD19
-:1002E000011732DFD8F6CCFF75DE7B5285FFD4CE06
-:1002F0001EEA11D38F6AB383CEA37F3F3187B251F9
-:10030000FFB6666BA47FBED1BC1FE5BB511FF720B3
-:10031000BFA023F93A43E8E1E9A897213DBCFAF9E7
-:1003200044F4DB3F7FE879DADFB43C333D11EDE2A2
-:10033000C3ABA7AE0C004B1DDE3C95F470F91AA9B7
-:1003400087FD9648FD5EB0BAF4CFBF43FADC144790
-:10035000F1F9193BFCC2EE0679877270359777EC9C
-:10036000212E0FCB515FF5257DD50BEBDD35C3DF9E
-:100370000BE93CE23BE9B1BBA6FA87507BE60CA156
-:10038000DF05923384FA4AEA53A9673593DF9486EE
-:100390007A407DEB83BB61FD5F6E51C9BDAB50D729
-:1003A000E53831EEDF81DCFEF9F036B5C13BF7020E
-:1003B000E05D86F026FB87C3FBC0320EE7832B3857
-:1003C000DC976EEE9688FEED8165DDC8EE39B0B93A
-:1003D00007C17BDA728037D9BD1EA3DDB30CE08D77
-:1003E000763EC21BC62DDBE111F0F672782F137A30
-:1003F00067054FA7B5836BE056942777FDC5EA459F
-:100400007D7E342E948AFEC8D1E75486E70EDAEC5E
-:100410002261BF4838FF9BD53D8176543B7B669572
-:100420009561BC72D60B8E2083FC7125BF1322E030
-:1004300044DDEB89385E78FC363B66705AA41D7348
-:1004400081F899C77C742E7F5EE3EB7BD18E577465
-:10045000EED7CFB3D943C8B7E0EF9C8894E78A07BB
-:10046000651AC649BC361BD24116F3F8C8AE91FBDB
-:100470003F7E86FB3FDFF6F8FAD6F9C4CFAD3D23C9
-:10048000F7492AE343668C2FB53EA710BE2BEEC872
-:100490004FCC67B8BF5445F3B82E8DEB6345D729D1
-:1004A0006E6805BA8987F126A579F8778F93C71109
-:1004B000D7C2B88EF07CA3BF8F47D2437D6E8F1D0D
-:1004C00087AD15E354A826F23BE65AB8FF21CF7753
-:1004D0004C15E553D3B8DF3E2B8D9F9F3889F17DB6
-:1004E000E8F7E4AA04715E7914C533DBE227126EE3
-:1004F0004EEDAB3679857C25E207FBB00DCC739AC7
-:1005000055C47341C562FB5B44FB5BEADEA6FD3567
-:10051000F05C1E47BD3B6581D58BF66B609B95E813
-:10052000EEDE78BE1FC2DC491AF2D1CD42CEDE52D9
-:1005300077BF0FF731A7D425E898C2380126E2A784
-:1005400079B89F9A69A1F86989ADE51974B36F4BC1
-:100550003F78A70D96B6C8C4ED96452E46E7632EA4
-:1005600003B31DE3B17874E46CCAB9E8C7181F9EE1
-:100570008B71DA618C13D65082AB210FF0A5FC9AF7
-:10058000B4D1631FCA62EC9FCC7329E27B2EC206F2
-:10059000E9A13489E200D762BCD885A946743651F6
-:1005A0006301134F9761684DC68FC78B75DF309419
-:1005B000859260BDA1DDCC10BFBE31640AF5023C5E
-:1005C0005CAB859A90AE4D368F19FD015F9132007C
-:1005D000FDE4B98B2F6CBECFA4F968BE734DFC50FF
-:1005E0005FEBDD4A703DC0E9166072A4CF5B35B6A3
-:1005F000431DC0F187F457E9F204A8DEED9CBE6507
-:10060000DC5CE2A93F741F09DF5BC4FCA09F658925
-:10061000D8DE123B7EF4529AF483B9BD3947F0EB31
-:100620001C496F9B8D7CFA31F20BD457D0AE05B8C4
-:10063000DD22D28EE8FD43D1FF8769DCEFDE7191C8
-:10064000E355585988D6BDCD4A7894E35E2BD23D08
-:10065000693CFE26E721E999893894092407D2D11B
-:10066000A1BA1AB29B6646C5815964BC4A8D956F82
-:10067000933FA6B3985A5AA7E17C942BE3BC48D782
-:10068000B758EA7B54D9DBD793FBB125ACD9CCEF73
-:1006900013897896D057A3557B6FF4774A94782FB7
-:1006A000DABF27F31D015312C65BCC84DA12A00710
-:1006B00094CF9FC4F1FDF72949778D47BBB024D172
-:1006C000A2617A1B6B76E4E686ED92A5F930D94CEF
-:1006D000A4B2C0581DF235284F78FE7E3D8BA24350
-:1006E00022BFE44DDCB7B8FE07C03FE5978ED54189
-:1006F0005E9C7C4D94B37BA9FDC925828E03F78F48
-:10070000C5FA271F96E575BCFC3E59FE10CF3F2069
-:10071000FB17F95551E58BA2CA1FE379CBA30F8DC7
-:100720000DA03D2BF6634A8629244F0A059D952C82
-:100730000E117C4B4CAFF274240BE17D89F3D51B79
-:10074000D0C957887A4B751C72A0DEBE3C432F443B
-:10075000BB6340AA3FB913A4B32728010BCAC93D04
-:10076000C19E42AEC73C675D28E8F6B274DE9F8446
-:1007700037F493D929F5E2FB7919E735C8D04FB79B
-:100780009FD3CFF2F6F3E9FB73FA3919D58FB48B07
-:10079000EECDD4C7209CD821B7E1FCDC9CDF7B9355
-:1007A000D0AE62787E0E403F67717DCE40E87FCE4E
-:1007B000B32FE5CC88F0BBE79D31311DECA7CA33E0
-:1007C0008CD22F9A3EB678603EF3B636590AA15EB7
-:1007D00025A40511F39A2BCF8FB2166D62845E1F8C
-:1007E000D7C924CE25AEA2F9CE79F618ED5BCE316D
-:1007F000D51F5E83F19E613CFE16BDBE3CD16E1FCF
-:10080000EE23C7B0DB2776E27AF8AE2C7D02AE731A
-:1008100020CA0C480B6A62EFC3FF49F45712CFE5B8
-:10082000DBD4C10E9BE732DC47F5D7E0BDAE196BD8
-:100830007307601CF786D491B710DC3A8C8BB6F244
-:10084000B868238F8B96B89AEF00E1CD1EE9B4F516
-:100850007E1BF871631F957C062C0B6D8BAC32FFF1
-:10086000E6D8515914E7A2FCDD8FEEB83F00FDEC4D
-:100870008AE7E70CA60CB9341EE5424B6E82C90923
-:10088000F2E25677E923388F2943AE28C4EFF956B0
-:1008900047CF521E5727BAB8D5EDBB1DE905EB630C
-:1008A0005CC36FE1712EFF1B2AC5B9FCFD12FCB1C0
-:1008B000F6A92B3B71BA79A49393D25D8066B43BC1
-:1008C000E43CE4F860A8DCD10CFD1D5A9CD11FEF7C
-:1008D000CF35B8F31F26B888F11BDCFEC59897E327
-:1008E000C372FBE1F70B9D47B5C0C7C3026FBE11D2
-:1008F0002AD323FCC589A3120CF9EBC7A5303D32DE
-:10090000DE7A7D67437E72493743FD9BA75D62288F
-:100910002FB636E7555D84FD5BE970C4A31DF6690B
-:10092000E3BF3FBC05EDBA0DAA5781F5CCDAB6F1AD
-:10093000C3E150EB141E2FA5A0A787E25EC7F15CB0
-:100940001AF29EA66B91FB355FB2663ACF17B11FC4
-:1009500060D87799E3DC41E7097FA9FD9AAD9DC492
-:100960007EC0003C8A8CFAE8038AB3CDB3F3F57CF1
-:10097000F9D27E0BDD0340FD01F43D061BAAC8E75A
-:10098000018A431734ECA7FB56933A71B93C2FEB1D
-:10099000760D2C32560929CAFD42904F49401FCD91
-:1009A0004DECD2AD780E37D741E7262ACE4C642CD9
-:1009B00005E928D0F776A837675911E5E79D89A79B
-:1009C0007EDF559B0BE9BCF58B0AED1714779EB2C1
-:1009D00018ED51ACFF6B18AFF8BFC714217CE66D62
-:1009E000E5E72B8AD57FE6613F73EB8AA87DB1CA24
-:1009F0007629601F8C2DE07AB618753BE4D5C18E40
-:100A0000E5A85F554BA8E79F509E581C244F92CEF7
-:100A1000DC4CE3579EB151FB4F84BC30B7F0798D6D
-:100A20003EE3A3EF12EF073A7535DC0F34A76ED023
-:100A3000CAEC589F51FD6BCEFC8A52B9CE377AFF73
-:100A4000C58D72CC9CFA4D219E277DC3AD38C9DC83
-:100A50008892B7A7AB8624B118F2A86D9C33FC7CB2
-:100A6000B2F50C3FAF7C20433F837C3D7E618B869B
-:100A7000FB37CC6E7322BCC60FEDEF9911C147EA6C
-:100A8000AB3759102FE687DEB3A07EB7425A10511C
-:100A90005E21CFE347C9E39FDAE4F1224AA57E61F4
-:100AA000E937913D7AABBCCF2AF8E40B212F64FBE8
-:100AB00066A471C4E30B56F29FBECFF027A7433F55
-:100AC000CDF96CF216928FCD39B86FF24BCD1FF085
-:100AD0006C53C8BE6FA1F3FAE3877A4CB81F9096A7
-:100AE0002ED7C1F9F57CEB50D3F93ADE55D902EC9B
-:100AF000F7DDABAE6AD6A1BFA67B060E44B92FC701
-:100B0000ED956EE1FD3A5B7F407FAEF2E5040FF2BA
-:100B100075313A4779613B16BE338CFF55BE6C5D2B
-:100B20008FE7682A13C19F85F10B5E890B211D3762
-:100B3000BD12A7A17E782ACBDF0BE153F04AAF515B
-:100B4000E8BFE98D568DE2079DF4DEE9833A9EEF1A
-:100B5000F9E453349D49BEF42FE3FC522AE8B44C27
-:100B6000F09F5FF0D1E9AA4EC487A717C2A4719F76
-:100B700073A172E956B4073C0E3AFF23F9B218FD8F
-:100B80001EF85E7C4932F97F117C477C38F78C93E4
-:100B9000FAAB38E3117CEEA2BCE4B732C12F566148
-:100BA000474C13F43D3CD37F633ACCBFB806F81DE5
-:100BB000C6F12FCEC8433E0AD38BC5897405F49283
-:100BC0003E23826F6A9A6E62687F58DD3EA2976903
-:100BD0009046DA1FD3DBEC0F67611ACC7B7C6DAEDD
-:100BE000E1FE4989C0FF85D2FDD582BECAECA11EB7
-:100BF00068AF9AABE2BC789FEE949BEFCFCCBF8FEF
-:100C0000C36FBED95780F6C3FCC7142F6086EC0AA9
-:100C1000944783F7565922E38D379DE9C73C0087F7
-:100C2000EBCE74A7F48654FF6C8443E99949025EC5
-:100C3000FD7ED63EE0209DC797CC41AB771DEEB33D
-:100C4000C5F955C4EFD16CE67C3022BE84F1308CFE
-:100C50008BC9FD41196FB2E27E6A849EFCB756973C
-:100C600083FE4EBBB853BE711F6D6ED33F079BA072
-:100C7000FC78AE4EF1A729267F2DD2F3EC89C1670F
-:100C8000CD909FF3C0F38918EF96F0ACD7423D505A
-:100C90004FD6031C310E56BF422D0A727B2681EFC0
-:100CA0007F71BA96741C4DDFB3CF74257A3A5D65B7
-:100CB00025BD731AE89545E81DA96FA47C977A476E
-:100CC000D27385C6E556853D89CE5584F5CD041F82
-:100CD000C671596FC5DB8345EA9BF52B8721FD9FC4
-:100CE000747BF1AC4F34FDBF589D4EE76CA41E8958
-:100CF000D637529E4BF92EF5D5DA0CFF8B88F7913B
-:100D00007FFDFEF97FC1A76B34AEB7AED11C443F67
-:100D1000172E37F70BB9B9DF2037E77520F71BD34C
-:100D20002F4EEE3F2DF805EC57B20B51AE47F6F7BC
-:100D30007DC6C87711DF7BD2793CE0979A7747F27E
-:100D40007E4F1BFF5E98BC6F12EB3D9FBC3F22E4C1
-:100D50007DB47CC70B6D28DF4F6EEB43FBD3FB18D4
-:100D6000E803D47B8D099E8D42FE937E884F0A9EB8
-:100D70004BFEDF9535F54807F2FFE8FF45FE4B7A5D
-:100D800094FC22F943F24334FF487E187B3FF87FFE
-:100D900088A777F9FDA90A2DB099F60F3D09FD91B5
-:100DA0002FDBECB6AD0AF1593BBD20F826CC274627
-:100DB0003D21F942F289E48F0AC10FD3A3F861BB48
-:100DC0005AFFE03068579DE1CFC81814E68BB95B35
-:100DD000A2F542877485114336DD5DC590AE2A20A9
-:100DE0008DA42B6B07FC90937171FC60CFB8307AA7
-:100DF000EA9FF1FF9C9EFA67C4A6A70119BFA03D18
-:100E000071BAEAA33CBCCF743A0FE46C6E98DEC6AC
-:100E1000BEC9B8BDD08DDBFDE037D2BC7759B22951
-:100E20009E33F62C3FD72AE952E259DA01D3453CEA
-:100E3000615EA66F52466AD85FB8503C5BDDCD1646
-:100E4000F443A6431AA9FF3BB2776FC9B848BD9FC8
-:100E5000716176E2DC0C7EDFFD17B4137F83F088CE
-:100E6000C62B73BA0C7108D07FD791FD16D2E888D3
-:100E70004C877EC56A0E67995F12D2A4BE4D417D34
-:100E80000BF4B200C7FBB9F4525CC0443C70D738D5
-:100E90007D04E0FD0F22CFDE1A877C3869A82CDFA5
-:100EA000BD42D750EE301947A7B8C8BBAAC807DE65
-:100EB000786B14AC7FEC832C1C6787F2D12392DA19
-:100EC000E2280A0BD77FF4B1D7DF5A4178E6E75E14
-:100ED00098BF45E3FB4C229F077947447E68547EC8
-:100EE0002DAF9FA8B5307E4E31C8F955C5AD374EF0
-:100EF0003FBE087B04305988E709C66F559C180728
-:100F0000B979C449DA8F0DAFFF9FE3303E3BAF5153
-:100F100011F90FDFC2F5DEBC95E7B73DF6AF15015D
-:100F20004DF497467132FA33D72B3A9E7F983B5453
-:100F30000976CD6D0FE76D1946FF06FF34637B869A
-:100F4000E7EF2EA63DE299DA77A5F621EB458C7FF7
-:100F5000E388D8F712DE96FC25E209D43FC0F2BA46
-:100F6000FAD8F7243E10F59B71DF84E0757205D244
-:100F70004FB345C2F3AB1508CFD18CE73F7BECAB49
-:100F80007181BE7CFA7AD4FACF35FFA60CA3BD805E
-:100F90007F1E63FBD0B9E0F77ABBF6827E661AE962
-:100FA0002949F3ED380DFD2481FF8F76F13C5FDC9C
-:100FB0000AB4FFC3F4F11FA28F6619CF6F47FFDF9A
-:100FC0008D1B6527FB47D4FF6105CA379FA9AD3E3E
-:100FD000E707495FD0BE377F9F8DDAFFE7B1EF5754
-:100FE000207C003F544E79ED1CFC501F951F11C50D
-:100FF0003F82FE897F51CE037C7AC49033E9999C6D
-:101000003EBE14E7AA9B47723BB159DC9B1A9AC9B2
-:10101000ED424F2687636F51BF393E020E1178862D
-:10102000BF10FA2111EB2638DDE496EBCE2A1ED74D
-:101030001DDABB78F980CCF4070259E17C747F7922
-:101040009959C5185F0DF79FF936C2F52601B7A16A
-:10105000999DDF0E7079A8205F561081005D6C5558
-:10106000022AFA09481731D6CD32DBF15520AABD44
-:101070006E3E477B4BFBF67A547B66CEBB98F602FE
-:101080006FE3A2F05A1485D75151F912990F1AE45F
-:101090009F948B650DAB96A4B9312EA9D09DCF300E
-:1010A0003DFFAA18E9798E53D2EF2504D7303DF7DA
-:1010B0007D1BE5FFC47A290F2F7D4007BC4D407989
-:1010C000382C9CBF0EE505E5FB15EB4991FAE2B221
-:1010D00007507EDEB84CD6F752FD9B6B657FFDA9AD
-:1010E0005CE291050614135EF384BE080C7C1BCBF6
-:1010F0006737F2F673D6E4BD1DE87E0E7EA88B82BC
-:10110000CBDAA87C20AAFE43E7D12FB551ED1746D4
-:1011100095AF88CAAF8ECA2F33B62F9DA6101F96E3
-:10112000023D2022CEC797F764B6D9A96DFA54B113
-:1011300093DD66E0ABB1353CBF644D7EF1B2BE11CC
-:10114000F9CC82E248BE90F77BAD6E467C61EE4002
-:101150005EFE3AB30379D93B5ADFF2F2CFF09F1922
-:10116000B4BF63B00BB6ABC67C932AE73DE1ED3B61
-:10117000EC11FBA0CC578CFE41C7FB2DE38B474500
-:10118000DA2581E262A44BB94E59BFF0C7B32A8E6B
-:10119000F7A7CCE2E20DB89F3352EC43BA780A7A53
-:1011A0004D45BD5929E23185783E16EBC5877ACC8D
-:1011B0008FB443587D4F5C67D33DFCDE40A006F002
-:1011C00083F135E6B5603CA5292969C193507FFBC1
-:1011D0003DEA02D4A3FB16A4D0B9A43399DC5FD8AE
-:1011E0009ED4256D3AE49B126EB3E0FDE4A67B47E6
-:1011F00053FAAAAA2F6D055E7B694D49B1BD0F96C2
-:1012000027117C5EC89C5CBC08E8BC012FED407BCC
-:10121000BFCB9986F71AD87233E3EFE5789F20BAEF
-:1012200079C0DA1FFDE7D24597D0BE55D9C3130A5E
-:10123000E9DEC21233ED67C01F9D3FF12F1F4DE75E
-:101240009EA6D58A343086D2577EFA4B4D22EEDFE9
-:101250003FAED07D892BBEA97F13DFE5295FD6CDB8
-:101260008BA87919EC7A3C8F7460752FBA2771308E
-:10127000AE8ACE7D427D86F5CB7FF0BC333E0FEB50
-:10128000AB4E3C5A7118BEA33D7CF83E75BD82F34F
-:101290004A74C4E379E9C33F7ADE41BB16CA9D8B29
-:1012A000E1FBE125B3D2D0CE3AAC78121558FF0756
-:1012B0006B6617A767E0FD7AABC0E76C4729ACBF48
-:1012C000D4D4462FA43F6624F3FC0799B38B37C2CE
-:1012D000FC0F3FD68BCE7D8DEBAC7F980970CAC8D2
-:1012E000D23FC2F4A0B877FCCA4F7CBFF01F27CA18
-:1012F000D2305EB75FF0CFCB67CAD2CA22EC9D195D
-:101300005F6A84F7572C9E3B709EAFC4672B743E78
-:101310009BD5A760BC7B9AF03F807E173C1FC3EE35
-:1013200069CC54A9DFA6FB5347205EC3747C37C940
-:101330004FF21B207F6ACD9DA4D70E5917B083288A
-:10134000B7C4F94586AF0D21FF6D8E0BC6E562FC73
-:10135000532FD4C98FA9EF39D111C177A2FEA701AC
-:101360007E3EF753A88FFEDBA781FF7144EE43C892
-:10137000FAE5898E001A13471C0E0DF1B04FAB3EF3
-:101380008CE7FA663C6E26B93FE3F1D485AD286F51
-:10139000805E303E16BDAE2B3B9B793CA2233E0CBB
-:1013A0002C35F2215B7A4E3EB4FF69C939F9B05C45
-:1013B000F829858F9BE99C7AF9208786FB8F231F6C
-:1013C0007F6D23DD5BBD3D6E00DE4F287FDC4AF87C
-:1013D0006A7138024EDC1F4D7468C9906676E6F873
-:1013E0001DDE99F34D81CA34DB004AE95E82DCD709
-:1013F0003BB6E0C147F018E571169C3404E0770A6B
-:101400001106703925EF6545EDF355EC7EDE92CF80
-:10141000CEB1CF779EFD3DBCF18C7C78A1FB7CFDED
-:101420003B8B73AE6DFB7CE69EB88F582EF6F90AA7
-:10143000D6F2F35BE50BF83B1C05293CDE7BA83AB2
-:10144000808FDFE27A034EBC9FFB10D72FE54C095B
-:10145000DAE09F63D6DE4EEF933E2DE44A29BEA329
-:10146000D517F9C59B837EFA8CC7E308AEE54FCC50
-:10147000FAF03168D7B2A8D81DE9178FE96C9670D9
-:1014800065784F57F67364D1EF7290EE0BFE0CFE49
-:101490002DDEF74B66CFDE948B78CAC8C1FD485964
-:1014A000AF7CF13D3D793DF08FC10F2EBD4FE5F78B
-:1014B000A65FB092BE031E4F6711F799A7D5EEB68F
-:1014C00058FA86EF7F1D803C5EA98FB80766417889
-:1014D000C97B49F8973E58D8DB1E921FF4BE70892D
-:1014E00049A1FB4B20B9E8DECF9D9DF97EE1ECCE12
-:1014F000DC8E2DCDF1D2FD978A9556EFE25CDE4F62
-:10150000DBBD6A3CE7646A9E41FB8F7FB3525CA4FB
-:10151000B2364E8F4BE4E722B6F4A573D19A05F7A5
-:101520004D3C5C4EDC29E8AFD233610CD20B94EF1A
-:10153000D5F01C9683CBC38A64F1FE1BB437C13847
-:1015400027F15FDD78BF19FD22C657C477E8C7933E
-:1015500018EE7797892DC3B80BD6EFD30FE19832E9
-:101560006932CEEF1995F81816BF7228DA77CFA82E
-:1015700003D1AF2DBD6F7BE16ACC3FD71F6F2CB07D
-:10158000D267DF277D3147E0BF459C072B833CBEF8
-:10159000AFB6B233D7F77E95C77B560A38493A9033
-:1015A000E515F7F1F350154BAC64BF542CFA88FAEB
-:1015B000AD7034A7A1DCAD78C14CF7985789799705
-:1015C0002DCA1EB117E8AACC9C44EF48CF0D145B7E
-:1015D000303FB74EA17CB85D6A0ED2E917B52F2611
-:1015E00022FD1C8C0BF5403DD47A7B9C17CFE1C9C2
-:1015F00078DB17B53DD6635C669AB3D981F791A6BF
-:10160000DDD1CD85727B9F3364C1F27DF5B926CCE7
-:10161000EB4EE708CCEBDA6594FF429C3BA13FA47C
-:101620001785E379EEE6ED96AE30DEDF047D7CF9DA
-:10163000CCFB3D514F55E434F7447D0274D0B333B5
-:10164000C2F96985F4F0BCCDFC9CBAA48379480743
-:10165000C077B3051DCCDBFAE26F901FE621FE07D1
-:10166000B4A723A0D31DF47DCBBA42C6DBEF403A2A
-:1016700091FA0BF2B56617C6DF441EC6C1FC8B0893
-:10168000CF542A1FC5CB037DF939B7163AB757296E
-:10169000EE2BB6C9A70EF0BC47E0B16C9195E4ED16
-:1016A0001E81E796FB5E48443C7EF9CCF69DB84F20
-:1016B00052B105B4B427065F08B854221C12691D44
-:1016C000645754E2BA13C37068A37FC18F958CAF7F
-:1016D00053AEBB52137090E5A2FD07826EE6320155
-:1016E000B7ADBD38FF097E437EA67776C4FAFC2EDF
-:1016F000E37BE2DF89F51D147A612ED005DECF622F
-:10170000783D51CA0928FAF2B97514F791F892F3A5
-:10171000B66779A4BCD3935D613CB69862BFA77CE1
-:101720005AC06FFF924E390D00B72FC0BFA273038E
-:1017300040AF5AC478926EE478057F9D700DAE1765
-:10174000FA0F61FF72DC7D81040DFBD9C7387F2061
-:101750007DA2FC947C595033E59AFE78EE37F0A5D3
-:10176000A35B5F5C2F1FDF9EC5CF2DEB6827407BFF
-:10177000BD41A1B8F37EE1CFEF5FF2626259049CF4
-:10178000E2B338BD4B3AC33F8C47C9F9EE72F1382A
-:101790006EF4BCA51C92F32EB8F7C66BF0BB9CBFD1
-:1017A000A457499F128E924EE5FDB7687A255A9349
-:1017B000FA5335C87BD28F63B2BEB6F8EDEDBF47A2
-:1017C000E7A51D74509CDF6E4D653C5E5F9BBE239C
-:1017D000F2BE0FFCD923F54E843E59A145E813A96A
-:1017E000FF2BDD3ABDAF322F8B9F2B39CEEA2DF97F
-:1017F000D0EFDCA3CD85899EB0DD79C5372115DF1B
-:101800003599BB959F3F93F09E7B6207D17D85B84C
-:1018100097547ADFFBC54390BEFFCB4CFB31A54B01
-:1018200046D3FDE3591BA70E46FAC1FB0C28CF8F08
-:101830006D1834903FCBE54C9B84F71A363C38E961
-:1018400066F83EAD41F5925C877E905F4BEF1CC819
-:10185000905E0EC6B5140F437BFD6ED589F6FAF087
-:101860008D831662FDE18E2EC9B81E7D430AE57593
-:101870002D89F482B473E5B9BC1A33A787C9599C82
-:101880008FAE6D4B399D15D4D4F4C4FDF3D675716C
-:10189000F49E518945DCE3DCD689FC894A0B5E293C
-:1018A000A47BA16487CDB4305B063FEF6CCB80EFA7
-:1018B000BBCDCD77A2FED87DA7A33F9DAB577F18A8
-:1018C0005CC6ED67BE5F98627C3F48CEE346317EE2
-:1018D000747FB2FD2E71DEF8A098FFB1DAFF9A8412
-:1018E000FAEFD8A61E2E5CF7916D71740EFF48D4E6
-:1018F000BB8C177B4F0BE836EA1ED4627E6F20CB81
-:1019000068BF493A3FEF3DA54FDC51FB01E73E5F21
-:1019100074A29AD17DEA4BC1A7C0F6A3127E7C1EA9
-:10192000CFF5CDA8B33AF13ECB21A47B3ACFA3F2B9
-:101930007BB736CE07879EEB1F44BF71C627FC7E60
-:10194000D18E55F7D2B982E96057E251AA363BF9F8
-:10195000A15593900D4E79FD4B33A0DDA94DFC1C94
-:1019600044BB770B763FBF33F2DD828BB58F2FD42C
-:101970002E96718587B38CF7C0245CA57FF40AE0AE
-:101980007FE880309CBEAA9E4976F1896A3FA527F0
-:1019900095FD2B8723DD3A92E8BCFE3F1A1E54F1D9
-:1019A0009D958AADFD7F40FF76983DC989FCFA552B
-:1019B000F502DAEF3C515D4569F8FDDC20A5576C76
-:1019C0006DA2765F350C6CC47BAE2FDB9384BC8F2D
-:1019D000DED7E178ECE8FEAE5CD7F1BB393EE5BC82
-:1019E0008F6F9A9A88EB6AFA534AE3E588C7842492
-:1019F00027DA77E5E29CC7E1D5DC7E3E6A4B7A7256
-:101A00001C9E0F597B5D1ABE8333BDE9FA49F87DF0
-:101A1000C636C58976BF77DB8444F4433FD75A1274
-:101A2000F15ED3E7ABE57DA820BDD33AAC88D1BE4B
-:101A3000D3B090C63CB97C8B19E9E4F2131ADD3BB4
-:101A4000FD02F7A330EEF1433CC53D98D8679AFEFE
-:101A5000128F97B4F9B1C28F1B2ED6DD8ABFB39116
-:101A60001AFE5E30947F3FB2F6F9F1D8DFB10D6611
-:101A700027CEFBAB0DFC7D86D9E07FE1D594A39BFF
-:101A8000B87F33BB5E217FF8D826D0CFB0AE8ADBDB
-:101A9000CD3ABFAF69A4BF0228C7738D92FE66EB33
-:101AA00041A2EBE8F73392593DDDEBFAA5E8F1707E
-:101AB00096F13C661B1D76847F0127E45BA4438975
-:101AC000E7D9ABF9BEB9ABBE7F3ED293C47BF4BBC2
-:101AD00072351646F71202A6787AFF7782DD6356D2
-:101AE00060FDD7B95B46A1F89C98CDF5B85A60D295
-:101AF000F11E1AABE1F7F3DBC98F2C6E0FD56433FF
-:101B0000EABF73363F2F2CEF63C91416924DEFEFE7
-:101B100025B8FEED812AF6C76BC76B30FF09C35DA0
-:101B20007776F3028A1E5F3E5E03BA9D30D0F5429F
-:101B300057C8A765DFC7F397B9069921BF68D1FDDC
-:101B4000E347E1EFB264EBF1D911E3C87EE1BB23D7
-:101B50001BE6B133C5EFC4B4D2C2EF479D545AFB64
-:101B60002DC80DD77F4F61FBFEA184F32D6646EF94
-:101B7000C074C6F90FEA38BD255BCFE0E31ABF9702
-:101B800031B684CEC705F8FD16F8F3D9D2F0FE11B0
-:101B9000A7A73279DF6599F1BE0BF3F2FB57F21E6E
-:101BA00092BC67D4277C7F6AEDC5DC9F3A6986F5D5
-:101BB00026B5BFCFA634BE4EEF61D504584B1CE10D
-:101BC000C1787FA52281BFD337FF852F772059CDDC
-:101BD00092F60A2ADBC1E1FBFB2C9DEFFBDF29E833
-:101BE000F04835EBDE1D58F9DAE6E6440F4CF6C452
-:101BF000F8504FE46F8FD59F8FF03FB2B6266BBE83
-:101C00001BEF7D5ABDE3A0FED120BF573957D89BAB
-:101C10006C43AAE073357415D4DB95DB87DE6F184F
-:101C20009BCDF5F289DC500EBEA713C8E5FE0DD49E
-:101C3000A3F36B458BC7A462BD13CFDDDB7D3AE018
-:101C4000CD8AEFB7B9286578FFE96A3BBE854CEFCE
-:101C5000BA3195F66983FC9D31A897887ADD3335D2
-:101C60009DC7D1F9BD39892709FF76788129A03D23
-:101C70006AB23133CEBF0F5BEB447D21F123DF31FC
-:101C80009DFF028F9FCC575A6A5330FF8C42E7DF8B
-:101C90008ED8F8BD9EF67A6EA305413D73ED54C310
-:101CA000FB3CF2BDD05F3A0E343F5BC897FEAC7F81
-:101CB000E47BACE5A2ED68B5C483EF49CE4FB5D166
-:101CC000BB1DF31FEF46FA041C6116598FAD4D2161
-:101CD000FA589AAB129C6735307A77A7B82193CE21
-:101CE0002B8E6B70519A78269DBE1F7BF2CD3C2EB9
-:101CF0007F381E8A9FEA44EF47173FD56B24FFD1F8
-:101D00008176EFFFF07793ED36BA473B7F37D74BBD
-:101D1000F36F50293EC9C4FD709F988ECFBE8CE2F0
-:101D2000393E16FB1D589F7C0756379FF31D5809F7
-:101D30005FABC04FF4BBB037EC1E988E7EAA7C1709
-:101D400056BE63D72CEE6D45BF0F7B6F6221BD0F72
-:101D50003B59E77A24FA7D582D10E745FBD69C6560
-:101D6000E7EF35F8A3DF8B6DD170DD9346F0F762B6
-:101D70006F981CF12E02FCCF3CE26B92D3E611ED82
-:101D8000DE0732237D5B7DC6FA5B24FEFBB03EE7B7
-:101D90007C8F37CB42EFBC69F85E35E42789F77852
-:101DA000D18E43FBFC94CEDF95B3C6F37537B3BC3D
-:101DB00074E4FBFFDFDFA13EDFFBD3D1EF4D47BF74
-:101DC000333D70D71F0DF941CD6B0CF587EC5D6F7E
-:101DD00028BFBCE56943F9F0A35B0CF92B5AFF6EF1
-:101DE000A87FD599570DF97CF6A6A17E81ED7D439C
-:101DF0007EB4F37F0CF5C7A41F34945FEDF9C25095
-:101E00003EB6F769E37A34FF59D487C5DEEF0DEDAE
-:101E1000C633CF1FF01DE71BDD267AAF43C911F68D
-:101E2000B5A0BB1FB384DEEECE72507E8D564784C4
-:101E300088EE1A14E2F7683DA67DE1D3311EC75E35
-:101E4000E4F7BF92C0EED322C64BD66DE01086F306
-:101E500029454E433ED5976EA8DF69B2C7509EE133
-:101E6000EF6D28EF3CD36BC867570D35D4EFB24008
-:101E700037E473034586FADD96F90CF91E75930D68
-:101E8000F57BADF61BCAFB04671ACA2FD95465C887
-:101E90005F5ABFC050FFB28680A1BC7F6899A17C09
-:101EA000E0AE3A437E50F36A43FD217B8386F2CB5A
-:101EB0005B3619CA871FAD37E4AF686D30D4BFEA0F
-:101EC0004CC890CF67BB0DF50B6CEF19F2A39D1FAB
-:101ED0001BEA8F49DF6F28BFDA73CC502EED96B125
-:101EE000BDBF367E17764CB1F73F86F68191E27D15
-:101EF000E82D0ABD0F7D5B4E57F9AE684B1CBE8BBB
-:101F000018F051DCC78507FB504EE1BD6B173F173A
-:101F10005342F12337D939A48A3C784E07EC8044E8
-:101F2000F4AE7273D14E4E08DB63596723CEC99D60
-:101F3000CF1EABC86144E76B73FC6539A9E87F3CF1
-:101F40005748EF7BB3C0529C877CE7EE9DA8778D06
-:101F5000657AB5ED288B7CFF78775C5DD68073F869
-:101F6000EF57DB4E307C57B9AD5F11AF50607DF35A
-:101F700023FA5F09FE82D69DB1BA6AE01BB091FEDA
-:101F800058EDA4FC43D5E9947FA4DA43E9EAEADEFC
-:101F900094AEA9F652F9DAEAA1947FA25AA77CB0CE
-:101FA000BA88D2F5D53EFABEA17A32E59F04BF18B1
-:101FB000D34DE02763FA34F8BB58BE19FC5FCC3F21
-:101FC0005B1DA0B4BE7A197DDF525D47F9ADD5AB7C
-:101FD00029FFB7EA20A50DD59B28FD7B753D9537D8
-:101FE000563750FEE5EA10E543D5BB28FF6A753346
-:101FF000E57754EFA5FCCEEA164A77551FA5F48D78
-:10200000EA562A7FABFA0CE56B4DFCF740D6E41894
-:10201000F721645EBEC720EDBFF168BF23710C35A8
-:102020007F65B0DFA3ECE8687C1C1771DDF0FB096D
-:102030003DD7D744F84F4F8AF1E47B0CD1EF2830DD
-:10204000619FCA774FE57B0D33C4BCCA053F0C4284
-:10205000FAEC4DF4F9D6C5F80BD21F1C90EAFF1B21
-:10206000D167B62940FEB09DDF27BE21D5FF52CEF5
-:1020700020DC2F9CBE93C6737A69DFB0D81A4ABDA4
-:10208000318FDEFBA6B85C47E3558A73DF1D96BF30
-:102090007C2C0BEDE9A29F547A67EB1DB3837EDFA6
-:1020A000F02D0197B7724C86F4E354FF9B38CF6F45
-:1020B0001D55B79A60FEDF5E79FB93BFCE0DFBC95D
-:1020C000D7A2AB09FECD04E631D3B942A6BF968BA9
-:1020D0007613185698BF910528BDD5EDDF83FDDC3A
-:1020E000040637E6FDC3AC39B1D6153DAFCF72B8A3
-:1020F0003FFC598EC9905AD3FCFB104EDF3A749ABC
-:10210000D73B978FE989EB92F32A12EF8E8C67AD5C
-:102110004FE0FCBEDDF6F561A55B18FED21FA77B84
-:10212000FD28C76E57C4BB76EDDE11A0F2923B15B9
-:10213000B2CFA6803F83FB43F2DD805355667A0F12
-:102140001EDF19C0FDB353559FDB919CA11EC3FD3B
-:102150008D1A3CA003E53577F3FBF425F82EC60075
-:102160007CB7C0C6FB5DA810DD0D4FCBE5F79FC166
-:10217000DE23FFC9DD4AF7F4804EBE273AB95CA5DD
-:102180007BE7EF98823D15DA4F9E6E51607EE56EDB
-:10219000AFE17703A2E9609EB82F20BF037D99BB12
-:1021A000C0385FBD34A437C5DF5FBEDC83F0AA3121
-:1021B000F1FB43813754F17B4E5C44ABC32FA53810
-:1021C00023D3BC5E8C17158BFB264D2A5B10EBBD11
-:1021D000F05E5D38BEDE49E7EFE7D544EDB374E964
-:1021E000C2E9AA4B174E6FC5AFEEA67784E6EDE2C3
-:1021F000EF1DB2BC96BEB1DEE7AF5CF0469FEE11BC
-:10220000EBA86CD8CFCF57B096BE91E7C975D1AFC8
-:10221000A423D5E2F0AFB347CE8FD30FD0754F8450
-:10222000C3B7C940D7DD88AE0FE3BEE278AB27E97C
-:1022300046057F25807D85EFFBF8FFECA4F341F296
-:102240009CD034E6A3B41CC800E9D8175845EFB9B0
-:10225000CE66F5F47DDED0A9F47BA495AC75543A36
-:10226000C0ED86658B5EC3E7F0AEAB5B351AE3ABC2
-:102270001383A5AF613A61837218FD54E08B215D31
-:10228000301EA2542DC12399376FCE5F825B66E367
-:10229000558E0FF626C707D08DAEBADAAF13F8E029
-:1022A0002A6CFF6DB24EEB50138B0C7C50B298E948
-:1022B0008A3B7CDEBD8D2F86CEF90CB7D498D64AEA
-:1022C000FBE6952F5B5D88E7D98CEBED703C43EA2C
-:1022D0006B46743E87C57BB1DE7141D7C7B319D158
-:1022E000F57185D13D756947B21C7FFA806E61BD7D
-:1022F0007BDC141C9CD88DF4F2249CEFCEF4EB3CD8
-:1023000018079BE3B6D1FBA7C793833951EF7CD065
-:102310007B44328EB5D2CCE34AD1F35286EEE4BF91
-:102320006B616101DC9FC0DF751E8CFC8CEFE628C1
-:10233000F40E740BF2BD79A4CF13ABFF5AD1EFAEFC
-:102340001FB9BF1B80F5E0FDC676E338C538F17CC8
-:102350001CA93FDA7E473A8D19C6FB4D975CC2CF68
-:102360003B0E9DE6BFC8944CF226C3E6BF0BE94E78
-:10237000C675A41FB82BF74877F2D77FA8C942FBD0
-:102380009CDE2140FBFB4A2E97DE317BE8DDDD77CA
-:10239000F273297E2FE5EDB54379FCEB5A19EF1A5C
-:1023A0001115EF8A8AB7B011B1E35F8C79CD386E21
-:1023B0001FF689840FC5595E1DA1197E3FEA55E1BC
-:1023C0007F9E2A72E7219DEFEFA2D23A1353F8BB0A
-:1023D00021AD0E95E86C7BC06BC7DFA3582EE2A43D
-:1023E0002BA2DEBD5E9E37DF89E702AC0EFE9EE5C6
-:1023F0000323E367469E477FAD073FB77463CFFC77
-:1024000077915EFADA8323493DEB9A07E7AF88F5C7
-:102410005CE204789BD0EEF48978A7FC5D9351A42C
-:102420009F259E2F543F3FAD0517C7E37ADD8CF8FB
-:10243000CEB1DA46F253ADD74378343AB5E7C4CDDE
-:10244000843FCDD71BC7691A1CCFEC50FFDB260B8E
-:10245000C5A15E3695FD19CFADB77E6C6578CEA16E
-:10246000DED1594323B7FEC75F8DA2D431BC90BFE4
-:102470003FC912F09DCCFE4EF697FF462489FB61C2
-:10248000F50ADBC51F6BD513F09DB77A133B7D159D
-:10249000CC6B8B7DC0839711A9F9545CE77BDDFD84
-:1024A000AFE03C06B32ACA3F60F1CD5C07E33EE0F3
-:1024B000B2117DCCEAEE7B95CF932D1907F3BBB219
-:1024C00040A1DFAD5B227E97CDE18D37BCB7EB3B02
-:1024D000D393F4C5DB423ED7A6EBCD78B1A343B886
-:1024E00039B556C33B592C8BE273128E91F8720E9C
-:1024F00036E0CB6F8EC4D750C0D7A591F8D2958B5C
-:10250000C1D7935D18CD57D26560A467D5A83CAEFE
-:10251000C76AA896338FCEB7B6A34FCFE67AC86FF7
-:10252000D72E217849FA94F41A834E6FDF8EF23851
-:10253000DBE4C4FDDD7BC7C5937E93742BE9D5D264
-:10254000959FAF02BAF57585748ADD371A654834F0
-:10255000DD62DC2B923E4B3AA463E68CE4D7F1605B
-:102560003F24B9D0DE39BAA13E823E4BAABED6B8CE
-:10257000FC387B55FCE0709CEE7F012DB720EB0012
-:10258000800000001F8B080000000000000BED7DA4
-:102590000D7854D5B5E83E33672633934972924C93
-:1025A00092811038934C424826302480FC552721D4
-:1025B000D0F0EBF05783243A58B4412193026DA335
-:1025C000D77B33908001EC2DA2F5A1F2EC808A68D4
-:1025D000B506A51ADB889320DC685107B52DB6DA5D
-:1025E00006DBCF9FB64A10AF175B5AEE5A6BEF93DC
-:1025F000CC994C10ED7D7DDFD7F7A27C3BFBEC7DC9
-:10260000F6CFDAEB7FAD7DB268A6C4DEB130FAB9A1
-:1026100000FFFCF0EF9D62F81D7F5CF85456DED59C
-:10262000DA8DE2F915434BE8C7DE2D1EEC675AB68A
-:10263000A9981918DBDAE264CCCC58BBE4F5E5C004
-:102640007872D3A90DF87C8B0C1D1D8C853CE6F0AF
-:1026500043388FEC2FF6A70C8E975554E550B318DE
-:102660004BB9EC4FC93740BF4FB30D2A93E03DF54E
-:10267000BA276C93E0BD93C90CDF4BCD8C363C0080
-:10268000EDFD6F8E65FB60984FD704C62876C6B601
-:10269000B5C03EDCB89A708E612A967D39062796C1
-:1026A000AA939701277FCE447B98EA7B5CF98C4DF7
-:1026B000C6BA4FF4EFA3FEDBCC3B2D369CC7655169
-:1026C000F64983EBBCC2C89A3A60BED92A6C0AD6D6
-:1026D000CBCEB7AA8B53B02E51FDCE96DDFEDFBB1D
-:1026E000713D612A33178459A08C315B71480D41CB
-:1026F0003FCB6616C0F7E3E179BF4BA675587AEE7B
-:10270000612AF4CB747BA500F4732C80F13438C3B8
-:10271000BF45008AB472E8B78FF9D824848F2D1C86
-:1027200092868EB728ABAA574E1DFEFC16C5E10156
-:102730001378A09DA7E56FC64087076B4E03CB6655
-:102740006C23F65519ABCE875F70DE66F3DE2498F6
-:10275000F75A359DF6FD89A32A8D79869FEF7E383D
-:102760009F501140BDC542E5BE168585004F1E0431
-:102770007CC1FAFE1695CA032DC5543EDAE2A5F6D1
-:10278000C75AA652FD472D3EAA77B4D450FDC916AC
-:102790003FD50FB5D452FDE99600959D2D0D54FE01
-:1027A000A4A589DABB5A9AA97E45129C1BEEA738CC
-:1027B000E45C02E7D17EB3D9A7027CEEC67304B80D
-:1027C0001FF1E5677AE1BCADC5069604DDACC777BD
-:1027D00031DC8FD569F085E11CB63A77B1AF43693A
-:1027E0009A92D22EA5C1FE1FB7B74B13A05DBE9320
-:1027F000A9F0FC7E29D4C0BC8CFD6B78865F9EC698
-:1028000098DBF9CDAA0CA8B7862B775A006F8BD42A
-:10281000C5B59B62EA6A4AF98D0795C1FA18CF5E81
-:10282000D906EDED6AF54E87C4D7C14632B62B3CCA
-:10283000C7BF09F02892CF4208F77E97398CF8B8C5
-:102840001ACF4BC6F52BB4FEF9ACD56980F58F5184
-:10285000CDE54837D03FC21C97DEFF6E55A5E7F1A6
-:10286000EF5DAC9F61D225F563C68B8C87EDD245B9
-:10287000C6B1484B2D5158FB0E93E01F5976E21F0D
-:10288000ED2676AD1FE0DE6EE5E5699744F3F5BA17
-:10289000AAAE724179958B9F6BBB35A454E1FC6560
-:1028A000062FF20BD6EC7A3D1FE6FBF64B32DBAE81
-:1028B0000EE2E7E3829E0BC7A4F8701EF62F967017
-:1028C00021CCF3D5318FB76540BDF001AFD708FDFE
-:1028D0007730AF0DF12474BB813D04F51F4E2AC83B
-:1028E000580CDD4B27FF382300F8922CD61166AC2C
-:1028F00006F16DD3961BC6F441F9E909CEA7BAC417
-:102900003C7B4DD1263ACFC97686FB666C6732F2A6
-:102910009D4D4E38A4CB18338CE0A5D9A45C8DFD19
-:10292000CC5BCC2C04EB31FFF5328B1FC66B3D9793
-:1029300054837C84B16832F231B335A0A4C3F39DD3
-:102940002103F18556D51E9660DC1DF6F25E15F961
-:10295000A762F016221C3D0682639BFD6B6123F289
-:10296000676953032B80F52A4F5A5CF03CEC312801
-:1029700048E761DF921AAC8702B2B750150C02DB50
-:102980000319E1ED382EEBFFD9046CAF635E84C30D
-:1029900096EC3FF72443BD75B9E235F2DEAA3C85DB
-:1029A000B111F81B4CD96AEADB9C8CEB58C1FBC314
-:1029B0006FDEC54087A949FCFCBED73D57C92F2310
-:1029C000B912EAE37C49BA0084289BBC162FB48F65
-:1029D000B797D7F8A09453CA2D2AECB34D29B7ACBA
-:1029E000A2FD333B83793219E74FAD8AA1262CDA59
-:1029F000BFEE2131F5827B0A9112B5B7D9777523E5
-:102A00003CE4EB1973A9B83E984FE37B000F4BC130
-:102A1000CC5E15F6D17E4306ED4396BC5467D7CB0A
-:102A2000B4EE91AA2DC2C6039F372FEC65C03F4676
-:102A30005A6E5A80F5110DF2EFFB62F8744E405F4A
-:102A4000CFAAD5D73319D42D31F30ABC89875B3C83
-:102A50003C46286D2770FD2302323D8C5FFF3DCA46
-:102A60005DE9950CD769A77566DBAFAB040801CAB1
-:102A7000F93721FEFDBDEB1CAF2CB1B860FEF10EA5
-:102A80000382934D60FD9B71DC1D02DFDB5DFC3C2E
-:102A900007E9CAA8D1A50FE9724CB3818562E48E1B
-:102AA0002B6463A198F90ADA3374F5C29D2375FD8E
-:102AB000C7EECED7B58F0B97E8DA4B0F94EBEA65EC
-:102AC0001DD375FD277456E9EA1323F374FD2B7AA1
-:102AD00097E8EA93A357EBFA5F76F23A5DFBB4BE50
-:102AE0001B75ED33DE5FAFAB7FA5FF165D7F20E387
-:102AF000868E047272BA8BF38536A72FEA4B20CFED
-:102B000007F42E45EE1F380FE09D494EC0EC98F9B2
-:102B100052BC3640A6C13A63A3947793459DE47AAC
-:102B2000ABBA19F139D54CF82CA33C87FAFA9BCDF6
-:102B3000E124C4C3CBBD2AF217AF8BEB336F17F977
-:102B4000BE8AE756996A21B920DB793FD93E87F4DE
-:102B500094D1BB812F55A0D6C806DA93913FB78494
-:102B6000FC6EF7E0BAADCA4E86F45B995AC3FAEC34
-:102B700083EFCB8A8F0552703E95E6B32821EA6732
-:102B800055E1FD987D1D3618981DF97837C809184C
-:102B9000BF23255746FAEBF86B4935952933E620D4
-:102BA000BE4F54D8034F40FF0E89F532D0933A0CF4
-:102BB000EC2CE86CEC497BF99D20AE8135FA8DC890
-:102BC000EFA6B0262A471B980DCBBD52DF0606FDA7
-:102BD0003C4D27AA72A0DF0977600DEEFBBBA04336
-:102BE000E0BEBE3B9EEB595BB2E7A9A897B5BB3AE6
-:102BF0007AF3713D592057901064BF17F50A6DBFE5
-:102C0000778AF394F3DBFB50FEAD4FB7A8A82FC92A
-:102C1000969DFEDF03BCEE37F53DD20AF5364959E5
-:102C2000DB817CF166BBF72186FA23879B9A62A839
-:102C3000D80CE3766CF2C9E9D0DEB18D79DB903E39
-:102C40001C959BD3E179E1A855860CA407F7A6CD86
-:102C5000586E413D16E61BE7D96BC884F6D24995FC
-:102C6000B50C65AF02F3650E8F4FC6D4DD0CF7C30C
-:102C7000DCF2BB8857A8755F80A55766C079C3BCD6
-:102C8000563C6F894A8283F59C3D6CC5BA9BC3C58F
-:102C9000EA93C2C95077B87D92CF83EFEDA6F3B522
-:102CA00046F47AEC1A77E04E84A76381FE5C65CB2C
-:102CB0005DB4BE1D064E17EDE9EA7194CFED2E7797
-:102CC00046AB3AB84E8DAFDC2FE4A7F65CE32B0A97
-:102CD000DA145983FA0DE0F96E4301EA673B19F201
-:102CE00027EBAD3B19E2B55509A90CF5F07F0B11A7
-:102CF0009E6BFAED064133D5F9B51694D7671DE5FD
-:102D0000A4CF5A9BF7D379C5C3CDDA6760BE8BC019
-:102D100035B5E85E92EFC080D542804F4FB6BD61B9
-:102D20006F02BD7FAAB01BB6011947495EF92DC8D5
-:102D3000AF4DC2CE004C30A07C3BAB30925FACC3F9
-:102D400045F50DE9BCAE8DB321AB3CE762FAB77532
-:102D5000B7850562F6B10DE641B86C39BFB806E13A
-:102D6000CA64220EB6E3AF9EBDDB1196C2AE992AAD
-:102D7000E03D1BE706B88E3633B20BBC8E053548F6
-:102D800077FE73F9247CFFE4CAA07EDE103336D1CF
-:102D9000BA4D9A5C325C98406B55CD9A1C26D596FC
-:102DA000CB2DF8BFFB82847C3F468EF182E4BA26AD
-:102DB000B70B77EADBC7EED6D7C78587BCFF06CA55
-:102DC000FDE5FC77900BFAF67B85FC5E8EF21B4AE4
-:102DD000B6CC4472CF022BBAC0E5EEA01C04BE9064
-:102DE000D711A944363A6A638C3C64B40F9D7C5C6D
-:102DF000E3E67CCCDF2B9BF01CFDE7C0F8A818CAEB
-:102E00009747277178F79853C29BE1BDDBC12E0A23
-:102E10001471FB3900A4F65DD9FBCB3AB4B37A8DBB
-:102E20005EC0D881738A3FD715F91C7F7A5DFEBFDB
-:102E3000BA487FE8AB40BB1AE70BC4CCD7634B1D45
-:102E4000CFC06E79B92860CC877E1FD73826217F06
-:102E5000481AC54C489F383F2B1AB4DFAF12F4B460
-:102E6000C3FB5AD31158C76D2793501D67B38DC745
-:102E70007B5BA0BE3E4F267EA65CB6F60768275752
-:102E8000FD1ADAE19DDB543587F4F45E13D9EB5576
-:102E9000028FAB84FD75B4D044E3E68A75E78812EF
-:102EA000DEB071FB3B62437DB6F400F062FD792633
-:102EB000F3761FE9BB651DF1ED3E86745C22F005DB
-:102EC000EAF64AA84F14F50E26652A708E136AFB9F
-:102ED0007AD094F0BC78D4867878D0CAF5B7470514
-:102EE0003E6433C91B81F5671FB07BC3D02FC5C8B3
-:102EF0000E46611FDE17E47762CF7D7C97BEEE61E0
-:102F0000317517AE435FBF5D6D92102EB7D7818EBE
-:102F10000E5BAEC84F71BC5BCA10E645885FB38DCF
-:102F2000F689684FADAFB433846BD2A9B1FF2B8A59
-:102F3000FCE38491A15C5092D53BAAE17DE56799C1
-:102F4000DE4DEAE0F93FDA82AC1BF8DE052F6B03B9
-:102F50009EFCDD2A5B03EABF8FC179A21CF911D860
-:102F6000D9D8DE01E78AF527C1CEC6F210D8D9F844
-:102F7000FC69B0B3B1DE097636963F013B1B9F7703
-:102F8000819D8DF5AB8A2ABF8AF8526FF7CF9610D4
-:102F9000AE3E595580AEA44138931F48627DD2059C
-:102FA00020903A85F525015CCF8DE17490841E2632
-:102FB000E0C32CE0B5205E7EFE383E6D9C8029D1BA
-:102FC0003853611CB2132C0AFA45F2E18D3478FEB5
-:102FD000E1CDBFDA8FF262A11458910FFDD74D7E7B
-:102FE000C7CCF5E77E33F6DF6305FC073E344AD0F5
-:102FF00041A80AE08972F725A3B7157A5D3EEBD4A4
-:10300000862CB0BF6FDA377931DAEF97DF74AA62B6
-:1030100034D40FEE0B2F964119BFFCE1534FE5025C
-:103020000FCE796015AFDF79EAEC28684F0BED58C9
-:103030005C3D0DFD525C3EED91586DAC7ED72CF0A1
-:103040003BD8BC8BE41CF077867068CDF6937C3C53
-:10305000EDE84F5D05FD8359FDD9D75D847F079B62
-:10306000EF2639D49AFA07D23F5A07E48597E485C8
-:1030700036AF262F3E16B8A7C98BF5565E1DE8174A
-:1030800028A0E7770ABF0E0B17523DD3CAEBFF5EAD
-:10309000A5BE8A760FC087ECDC23A925DF9B897645
-:1030A000658DEC4D82FA9DF6722BCA9B07F3B9DD54
-:1030B00002E386D08E0FCDB6841FC24375A8448F1D
-:1030C00019DAF80E372A5D2C43ACE385E9B608DA45
-:1030D000F9ADD5967DA84FEEB2E7D378AD53CD21AB
-:1030E000F4AF68F5CDD3A75B509F484FCD70615DBD
-:1030F000E34FDB01EFB1841F238E5B25B65B65B127
-:10310000478CC8CF2DA63FC5EAC9761625FCF11A13
-:10311000C020413E50C0F1AA82796BF1B9596A0AC8
-:103120002132EEC1B5E33E52849F92E5F2756BFB0E
-:10313000F0E5F27D69FB483187C43E484FDA6537D8
-:103140004450DFDB05FBC2F176E7AB049FF87D312D
-:1031500074BDC2B8B3A68A752B330FE13A661B7CE7
-:103160006DF8DED1CFEA1C805E6C0E6B92F17901B6
-:1031700058B4E89705946EBB7011BD23DE2F7BF920
-:10318000EF24DA0FBBC94CE7F24C215FCFBDE6B0AC
-:103190008B91811B1EB1246578FC7D6308FEFA18B3
-:1031A000D2536B868FE3AFD29FBA09F137BD3F7B15
-:1031B00033ED2B92F03CE2F138FE7C7E0BFF841C59
-:1031C00030227C3FEF3CB573D4F0205E7E4D28501A
-:1031D000B4F375D23E7DC59C0E343D8A819D9332F9
-:1031E000147E5B613CB568B06E76FA493F3639BCF7
-:1031F000C5E8BF6DFD9BB12191FF36AD80D3C1A65F
-:10320000541BE9CDADA95C6FEE4E9DA7B377AAC163
-:10321000FE91003F8C99AC03E9C8987635F9BF8CD4
-:1032200039A821E1BAE2F4D1B4055C1F55401F4D25
-:1032300030AF56CAA88F26D05307F4D18C795C1FC3
-:103240004D35933EBA27C55CBB3701BF792F9FEB45
-:103250007BDDB88F04F61ED879E487D4EC3CB3123A
-:10326000207B4DDBE77BF99CAEB4FE494A1343BF9C
-:1032700098D1EC5551DF34DAB8FE9804DB2C8E91EE
-:10328000DFDAFCEFE49B088E3D45FCFC0C16AE9F9C
-:103290005CFEAAD49408EE6A81A63F24C6BBBF0395
-:1032A0006F882F94DBCD3ED40FCAEDCE2AD40F8683
-:1032B0007B0F4CCDD0FB19837CC5FBB72946923FD1
-:1032C000B2D78978D661EA7BEA55B4E38EDA49DE73
-:1032D00074A48CAA8AD59FC15E0D15C32007FF0276
-:1032E0009468186AA782FD34BD00C6ED599F3D89D8
-:1032F0008F0B7A5ED950BD32DE1F3040EFA9FB5DE7
-:10330000FCBDF0087C4F5A3F3507F12A9EDEB532EE
-:10331000CFF952DE6A5857DE885E2AB5E7FF9B195F
-:10332000C9BF16DF7FF1C03970B93C0E264B33920E
-:103330003C5E8CEBFE70E36BD95E584AA37C86E45E
-:10334000F2C74D53D36E5339BF3D8072E69B32F1C5
-:10335000DB516BBAD33362CEF9DE96CE3CD98D7198
-:1033600083685EB59BEC015FA2F5FEABA03F16192A
-:1033700043FCD924F0407544E78E05B8AB7683173B
-:103380005DD2207C757CA0524EAF5660FEBC16E626
-:10339000B543DDC514F267E55D3012BEE51D594148
-:1033A000783CC6D12F853C31F3202B8E898B7CD283
-:1033B000544DF499973360C751FCE013476431D200
-:1033C000F72777F115E53DA06F07194BFEE61B3691
-:1033D000DAC2680A8EB95531603DEF07121BE5C2AB
-:1033E000751C71DD86FE9A6792C95F63DCED267FEE
-:1033F000CB0FA4C0F505B08E0FC3EAB7D1CEA51F81
-:10340000E8B7EE3BB67DDB498E45E7921CFB968123
-:103410003D94C09FD456C0FDE35B04BEE7395FC94D
-:103420005B5D81E5713AEF4BA5A783C8B7619CDB73
-:10343000D27652BC2B54C58AD1FE6B37015E25A0D3
-:10344000D73305226EA6F163013F2B5A2BB00FA391
-:1034500024F4BC038F3EFA6836CA6D864ADE00DD6E
-:1034600069E32417775063B2D7C7D0EF20293ECE47
-:103470006795903384F19DBF1A13E27544E3D3AE90
-:10348000AD4EEC5FEDF63A910EBA5D539CD701FC60
-:10349000EC76334B8AE1C31A9EBC903285F4106DF2
-:1034A0009CF529F917B5B7CDC08FD58BC86933FA0C
-:1034B000BD519FE999665161BD5BEDE551D4B7B649
-:1034C000DA1DE5E43FB703DF88F127D9EDC7080F20
-:1034D000ED5EEE67B323FF457F92D87FB7EB18ED23
-:1034E0005FEBB7A780D3BDDD1BE1F147B066B09FAE
-:1034F00055F687D0CEB03A18D995560BA7A76438A1
-:103500000E4B0C1FD1E6FD7E01B7D7B68E2A8F5623
-:10351000D2FA64F408B0ADCE7227C9438433EAA36B
-:103520002306F451F29BBC2EF881364E6B37DFA791
-:10353000BFD9E9ABCE443BD4FF22F285ADF6EB2CEC
-:1035400021940B29932E3ADEDBE2DC868ED73C4BAE
-:103550008CF73AD28331A55CC1F14CC82712E0DF69
-:103560001FC4BABEAC5F0C20AA90DDC6B87E051899
-:10357000EF4CA44768A545F8B786BEC7F9A44BD859
-:103580002FC0273FC5F5AF1BF5CEB14AEAC5ED9672
-:103590008CB972B10CE7F5319CA0511AB4E3E3F594
-:1035A000994A633FC9354D1E69F2E95ED467CC8301
-:1035B000F4A4F95F721BFC24B725879FF006F41B67
-:1035C00015E9C68871DF04709BEEE6709352A7AAD6
-:1035D000482FD5E7FB72F1BDC329EFE7B2183F9A38
-:1035E000C60F5FF86CBF15DB3F69A8BAA8DEA2C59D
-:1035F00085878B07A7DEF2876FC6EA2DC3C5873F95
-:103600002F2EDC936A26FFDBFD929E2F4D72733EB8
-:1036100038C1ADC50F0363DD59D8CFEF25BD51F8D3
-:1036200053DE2E0A94B8D1FFD56E662138CFC39FE2
-:103630004D71227E5C2A7C35FFF948A14F8DB4EF95
-:1036400097904E47368425F47FE7367448BE8BF456
-:10365000330ABF92D6DF24C6BF42EE37A2BCBA42BD
-:10366000D071EE399915C7E8817F2BE0FA9449E8CB
-:10367000EFA93D8F5871BC1E83BFBD08E543AA4129
-:103680007D2886DE4D6BCA2D5531F069C5B84E8256
-:10369000F3AB730FE85D641F69F2D6A4C90987AC68
-:1036A0009313C1648EB79ABE139CCEED21490A2CA8
-:1036B00047B89E9EFE8745C8B24E4B1D668C7F7FE5
-:1036C0005E5C6340AF31845769760CD28B57567E6F
-:1036D000DA07EF4F7CB892E861320B507919E37A40
-:1036E0001FE8515FC7F92A70C931E7CBD0F590FDCB
-:1036F000F9FBB812FDDE59E89F8B92FFF4BBE7257A
-:10370000E2E3F1F0D93F009F81F89DCE0F9A2BE4C0
-:103710005AAE6857D10FEAC27894DE4F59D1ABAF99
-:103720004F8EEAEB979D8CF37B867C3F7767F3782F
-:103730003F0EBA07E80AF9C16A11A71C150A572AF1
-:10374000B0DE3CD641F1C0DC860C1D5C2F378A3CD4
-:1037500009E69398B64EF8C995177E80EFDFE7D655
-:10376000F49F10E9593788F66F54AFFE761BDACE16
-:103770003B4DE40FB5C0E408AF6FCC5D321BCF7595
-:10378000883FB549EF47CD8D6D0738DCB0C7A46BD6
-:10379000F7FB26921DB054F86907F68BEBC8E2FBE5
-:1037A000CD2D1F3AFFE7CF0BFF3286CEAF8D7B2F9B
-:1037B000F01BE4A3EC3C9CEB14841B438F03CB93E2
-:1037C0002312C6A54736311FEAC3B91B992F917F33
-:1037D000FF6501AF7838B3D01504BF59E2D948BBB3
-:1037E00091ECF4911B0DA4078E047E807C60D15A6D
-:1037F0002017A8E7AE55498FBCB2C1C0500EB0F338
-:103800002DBAF761B9E4EFD4CEFD5E1C0FF5C87593
-:103810002C6CC0FD3495103DD1BAF207F101E0F5F2
-:103820000E879785E3F75493CEAF99877ECC18B86F
-:103830006878901BF7BCD1CDE32E1A5D803C7BD914
-:103840004D78C2E55C21CA3958D287D34EEEEF805D
-:10385000F55DBE99D17EFBD36D619EFF30102F3098
-:103860005E180BFCC932AB18FD2A3B149B01F31404
-:103870000EA7F7DDC7D219FB2DA8BFD533197BDE04
-:10388000D65F2A41FD8F0FFECBAE763894C3D6FEAD
-:103890001FA2B3D77EFBE6253531F5D47FBF9BEA67
-:1038A0006C2A5365808F0D67807DDA9479078C30A0
-:1038B000BFCD632727A48D0DD029EDA76DBA7A3B24
-:1038C000E679B4151A484F62B1EDB08FDA4245D0AF
-:1038D000B78FF2D8580D8FDBC78E2F3B2E32FE3CB0
-:1038E000187FD21718DFC2D79F8D8F40BE64E3FACE
-:1038F000D14F8DE3E3F9A2B328767E319ECC427B93
-:1039000031BE02F3D9253E9F827924D94C9F3730AE
-:10391000309F02F395FD03F6533BF43C4C173B8F6D
-:10392000ABBFD879B4197CB4DED0783BD93F0C9AC0
-:103930000D53D0CEE0F35965F6825CCEE1DA366500
-:1039400010AEA0EFD1B8D07DD305016713C25931B5
-:10395000139C87835B8FC2F398B629B6F026D7FFF6
-:1039600085F372F2F38A9D0FF5C64B9EEF6A98CFEE
-:1039700071E9F3217C917E06E00B67B239FBD2E15D
-:103980000BAB0A5D0A7C7B605C430C5C07F385EE45
-:103990005150FFB79AFC162FF0DFEB0B791EA2C730
-:1039A000B1C442F903594B2C9897B7C563AFC1FC1A
-:1039B000BD2DEE6516538C9CDEE2A9A376E84F7907
-:1039C0004E9E880DDD13AC8C45C9FEDF36B3DAB9E7
-:1039D0000AF1A789E74D6979449A3C64223E49FB84
-:1039E0008217D3BE72A8BF07FA6F6B9A44796269D7
-:1039F000E97FA6FCA81D0D5E2FB6DF67E571C6BB8B
-:103A0000459C091195FC68E3A73F80F1D6F2C2F509
-:103A100012C517D75E3CBE587E265A8579566C155E
-:103A2000CFA372D6C971F2504FB73B10AE3CDF291D
-:103A30002C71F8EAC6BBAF308BC79FDDFB18DA7775
-:103A40004FC158463D7D1930EF289E1E65B34FA9E2
-:103A500044BD7CBD81D6918BA17C1071E5650B9C2A
-:103A6000ABE0F9A8EB65AF04CF733CB752FE116829
-:103A7000F5A46F783CC7ABB03E649FABF5FB88DF25
-:103A800057FCBA417091BCD1CEABFC8C3719EDA874
-:103A9000F2C225941F463F1ABD1BE3F69389F6AF89
-:103AA000C16705396673C7EC8BE9FA093BED7FB650
-:103AB000BE0D9109E5627CFCEBDFFCB4CE24E6B5DB
-:103AC00098E9BD3AB217B5B8DA48A41D3CF7D18CD5
-:103AD000C725E2DF9FC2DF674E1E674BB281E9094F
-:103AE000F427DD6823FF655212D4E17C2433B38CC4
-:103AF00080E7F70ABFDF2689C9581F9C2FC270BE16
-:103B000056C9BFD3EBC292DB4BA6743FE517629850
-:103B100036D6EEECC1BC0D685FBFC695837EBB3464
-:103B2000208828DACD222EA5F949520BFA56A2FC9C
-:103B30007EFDA1BF2CB1A07C46C7D274D0BE0B3F86
-:103B4000DD159A39489749E7463235C67E49929B3A
-:103B5000287F23E9DC689D3F2522EC2EADEE73C85B
-:103B6000D538DF7FA15D00F85CC994367CAF128048
-:103B7000A2C6FA47CF3975E30C8E3F4A376F04EC83
-:103B8000E7D838C0F0E32733B53876FCFC61C62FA0
-:103B90008A1B5F4938FEE0B899BA71B7C89C5F8448
-:103BA0001CB670227F5E5651D57924E5E1F2CB1C1C
-:103BB00045DCCE057E2C53DC49E0CD6DCE26CA37E0
-:103BC00033DA787CD424E22547521A785EC4287D03
-:103BD000BE591553646CDF923AA75782F62ABB5E32
-:103BE0004FBFE2FC3B46E43B57C87A3DDDC79A082D
-:103BF0003F2F67FAE7A6517A3E7010E903FDFE29D0
-:103C000093A294979665A73C83E1FC076FB530CAF1
-:103C1000973225FB9B50C695ED4FCBDCE2847A1A98
-:103C2000C7AF19FBDD4BD11FF496C0E32D40F70859
-:103C3000C7BAF5397B8D31E3D69923852847EA0C3D
-:103C40003C3F9F7E60FEB7B246923F357E5ECAF033
-:103C50008DF147D537497E77CC3EDE12743130DFA7
-:103C600086DCBDA8C70ECC9714994CF30DE4F988F7
-:103C7000F9B2BFDC7C6F0B7AD6E6ABFFB67E7FF580
-:103C8000E628EDAFDEC0445E3F9FEF6DDC9FEB4B5F
-:103C9000CC27F2B506E6FB8E7E7FF54951DA5FFD53
-:103CA000803D29E6CBFE72F325999B281E7387C4BD
-:103CB000CF754351D99DE88F3FBB60BD8AF8A6D927
-:103CC000678BF005C0B345229FE9CA5166D21BB489
-:103CD000710FB44C653E33F7DB60593C53A2FCFED8
-:103CE0007153251FC6C3F600DDFB8AD02FA5507B7C
-:103CF000B8C549E5BE1695CA07C11EF4917FCACB67
-:103D0000EB45DCCEBF6384B26235EA0B95369EDFAD
-:103D10003C730668A283F61618603D56CC23FC1A45
-:103D20009BB81D6A45BB393C1CD5D9613C27DBC417
-:103D300017A22D504F9A6654316F3BC9C5FC89FCC0
-:103D40002E3F28E2FED8DBB47CF8AF483CDE0EFA0A
-:103D50004825ECFF5A016A665C20A15E75E577D2C2
-:103D6000491FA95BD697A2C03AAE9126FEDC0DF0A2
-:103D7000F8ADD047AE1DCDE938DE9E74A0649984BD
-:103D8000F97AC670187E5D9AB294ECD1A5CB19CBA6
-:103D900080F7AFC4F740AEBC2AF49957FA9218DA0C
-:103DA0006BA16A1E67BEE656BD1D798735A2A01EAF
-:103DB00077C74407C3F3A8DBA86FBF4DC40B96C6F3
-:103DC000D99557C6E5D180964978823C814D83F3D9
-:103DD0002A4A71507EABC8A3B9BA48E57C6E948379
-:103DE00092A833E6BAD330FE98644E7CEF461BEFC0
-:103DF000A8E03BCCE12338687967CCF8D8447A5FF7
-:103E0000CCA7BD77AFF4D8888BF935416F7BB7AFBE
-:103E100098CB67D4AF0FC6ADF3EC82FCEF55B3443B
-:103E200078DB2FA35F415BFFFF297CBD097D1AB0C2
-:103E3000EF57677D3289E22D6C14ED7B91863F222E
-:103E40009F6AE9405D66724C3E1D73F67BF0BCDFF5
-:103E5000F84AB2773BE19FD01F226F1A2E247FF1E0
-:103E6000F106D6E1F4E5717F5CB542F94062BCE150
-:103E7000E01C9FEFA0F96DE82726DFB0752FCF7704
-:103E80001CE9A8FA00EF45E1F3777478A5BFFFD4E9
-:103E9000DAFD8884F6C57D789F4B1E9C0FFDB4210A
-:103EA000D25FF5F7B2E2D7A5DDB7D1D6D36A66C542
-:103EB000648F1A803FC07C0BED7DB2A4A2DFBD5F92
-:103EC00046FC2A19CBFD449813CCEFB9703DCF982E
-:103ED0006BE0F91B6354AEF7B9FB47C7C685D2C682
-:103EE000F278DAC2E4D736AA20FF4C0F6F5E8AF967
-:103EF0004B0BD35EDBE882BAE5E1565ECF7DED1376
-:103F000017E86CB687DB78BDF4B54FF2A16E7F7809
-:103F1000CB52CC675A38831150521FDE4AF2326DB1
-:103F2000AC664F4747E17C0B254E1F5FB634261920
-:103F300012C6EF9D63353F2933E13CFEAEFF388961
-:103F4000FCC8AFF95F7DFA7823C3A66CBC27247E3A
-:103F50001CA9A4CFCCC3DF019EF3E54837BE6FB0E8
-:103F60004408AE63316FA69850E0AE0B17C98F8836
-:103F7000C72309D0B519F565556175A01FB736B3CC
-:103F800080B52006CF994FE039CFE3D1D6A3CD3FFE
-:103F9000645D70A47246ECBAF6D038DABA4E4F4C73
-:103FA0000AE17D322D7EAAADEBB4D47F3F3A23BE29
-:103FB000F9C3CEE5786EA753FA474B503FF1F0FBBB
-:103FC000748EA7B3FAEF97BC3175133FC7CB1FFEB2
-:103FD000C152948F1B25DFE563317FCE6CA77B6BCD
-:103FE000ED42CFDB91150831AEDF53BE63288FDF82
-:103FF00007A89E24F962E3FB3502BFFE632CD71F9E
-:104000006727ED6C3A01F8183C24B14DD03F78FE9B
-:10401000AC19EDF1855DA7CC6877371E3A6546BBD4
-:10402000BA11EB304EE31E33F1AB78781F1F6BD41F
-:10403000C5D1357BE2685ED11607ACA771B5E4C582
-:1040400014D9F5CFA6CFC6FAFA55B84BE0EF330F27
-:10405000CE4674A9F7776FC1F25AD67714E3052BD1
-:10406000027A3D7F65835E2FAF6FD2EBD3D7EE84AC
-:10407000D301F9756D73AEEE3D861A32AC678538A3
-:10408000CF15CEDBA3C6F1588FB987231159937F83
-:104090006725DF01947ABFC5C22E89E8B8B1D64240
-:1040A000FED7A3793C7F3EB8D6487941414407AC5E
-:1040B0003749C29FE523FEA8C9EFD99D678EE5E287
-:1040C000FB6B4D040716F245D1AF5F2BF0E9DADA4E
-:1040D0009A0F10CF6AD51BB91C1FB3DF44FE9500A1
-:1040E000D7C755E1FFAEEBBCA33A03F5CF8D12F96C
-:1040F000375636E8F5F57AFC05F5B766291C7121C7
-:104100009CF4EDD736EBEBDBC70A3956CA4A914E21
-:10411000BE375692896E44FD4F79BF78250213DD74
-:1041200022F97721DEAD3547C6A35CBB450A505D59
-:104130006B87E78D5CEE70796F008A22BE6BE27E42
-:1041400085D03A89F071E510F91FA31F1887D68F23
-:104150000A7ED26AF56F247BE93949417DA45AF67B
-:10416000C9199E417B361E1F8F093C7F85F57970EA
-:104170005D450874807FD1D2B430FAC38A9E5F4512
-:10418000F98D451592D740F46C60CDE558CAC41F2F
-:1041900050DFB4425964ECA8257E3DC1ACF0FC412F
-:1041A000278BE503BE479884797CB8749C77FEA87A
-:1041B000DECFF01C17EDBEFD0CF23B7781AFFC0E9D
-:1041C00058DF0E2B9F7FC7B312E9AF8D9E63C417D4
-:1041D00073004D70DE46A7E08F9DC01FB5FDC3790B
-:1041E000E720BFC20B210B3C34EF082D3EA0E5D7E2
-:1041F00046AA0C1780EFE488798F97A9B4EFEC1BDF
-:104200003B24DC771E0B6D423FD18FC7327AAE95CF
-:104210009A1F7FF960BCBA06CF739DB3CF4CFAB733
-:10422000885727E8B764ECE404FD7C4CE747986DB9
-:104230003C9F8A71E5F5CF155C34AFC26831E8E880
-:10424000D5A4D874743DBF584FE70BBD7AFABE723F
-:104250006A81AE7DB1AF54D7BEB4A642575FEE9F20
-:10426000A1EB7F55ED2CBDBDEF9CA7EB6F5597E8FB
-:10427000EAC9C557EBFAA778AFD3F31B4707E50F99
-:10428000982DA1BE808AF7E6199B9A31C8AF4B538F
-:10429000A13394B60AAB1DCBF68949113CB7F69110
-:1042A0003C9E9AF4E2B79C11847ADA63964A287F9E
-:1042B0002885AB305E6411765EC9AD4CC7CF1795CB
-:1042C000723CD74A5371401907E7E339A0E6F27C04
-:1042D000E968099E8F051D8888C74F5B48EF9810D5
-:1042E000A7FFBE5256692B467FEBADBEB9E497EAF5
-:1042F000640ADE97DD67E6F94CA1A779FEACA7B3A7
-:10430000CFE08BA1B7BB8B397D7EDF5F45F9498D4F
-:104310005D20CD10BF77BF6346BF5D6357772ACA64
-:104320008DF1FE77CCA85F0F3E17F244EEB761FC2B
-:10433000F2898EC47968738ACD34FE31C16FEBBFC8
-:10434000C5F92D20DC02B48F34FE597F90EFAF7E8B
-:10435000B999E85BE3A3C03F75F1B078BEBC726663
-:10436000780BD22EF0519DFD72EDB2391FA03DC4E5
-:104370005884F418E0A3FAF6515B89BEAF8DB36F91
-:1043800026150FF053CF05A097937E43C27D2D2DA8
-:1043900095695F2703B308DEDF07B8A1DDF8FD21CB
-:1043A00070E2F0FB3CF83C2EFC89DA39C5F7AB2D06
-:1043B000E5FAE8E3C3F0CB3DE21CF749D17264664D
-:1043C00041BF8DF074A5C5B21CF30C8EE57DBA1506
-:1043D000E309F53F96D09665BFEE7E311BF30ECC18
-:1043E000078F66633E44B0E368360338AD35A99B5A
-:1043F000502F063CF06E827369EC8CD0FAD775545E
-:1044000074E3F3759D92175961F0D09939B44FD682
-:10441000B715F5F87DC3ACEBBA62AEA7AC2B56A9C5
-:104420000C06604E94B38792C88EAD3F087C08D7C7
-:10443000F5AC44F730F66DB3D426D24FEA4BF9F71A
-:10444000185ED866661847590BEFE33E8EE51D33BC
-:104450005B106F0E4A6413063B4E2C477F7C70A3A3
-:104460008961DC565BDF8779D1DFE0FEDF5C6D625E
-:10447000786FB075358FC7BEB9D148E318AF3751E3
-:104480007DC51A9E277C64F5EFB6E6C2B86FAE957F
-:1044900028BF7ED6F5FF790CEB2BD6703D281E7F0A
-:1044A00007F0350E3F5704F47837044F1BBE1C9EAF
-:1044B0006E1BC4D3F12867E1DC67E720FEDCCCE8A3
-:1044C000DE62EDF923A61C586FFE56C58BA1DD32C6
-:1044D00063784B36F28523BC7DE2DABD12E72F2AE2
-:1044E000DD67CF6D3733CA532CE67C680F9E5716B5
-:1044F0006EAD5FC2BC362647F3717D2E91C7F5A421
-:1045000089D51E443F92CCF94BD933CEBDB17EA4A0
-:10451000F9021F35BE570AF6FE41F243778CC47B81
-:10452000E68F9BB87F6CB418AFB0A07FCE6228BB7B
-:1045300004BEEC17EBD0EADF10F8CF3AF6911C5D21
-:1045400068E1709FD71CA9C37DDC20071E43FEB71E
-:1045500060F42FD6A25C6BCF7FC913203F5709C9E7
-:10456000B5A0388F23D3DEDBB301F3EDC6D9E81C49
-:1045700017F7DC13C5736D74CB9467682D9C941387
-:10458000B8881F21784ED5DDDB6BEC3A33C79780B6
-:10459000AEAF13EB2D13F7F35817F71F003F96A795
-:1045A000960FF6D3F6AFF93DAC850FD2396DF826EC
-:1045B0009BC8EFEDDF417058B9F68484F752AE32F4
-:1045C000F94C7680F32FD2D872B4835F6A61744F4E
-:1045D000ED38DE570356F24A8B42F5A8B8B7F65AC3
-:1045E0008B4AE55566FFAB089FE52F341522BC8E3C
-:1045F000E4DDEDC7EF309C3E2EF459A6F07B8C0233
-:10460000F7CE76199905DACF1E92C2E43411EBBFCA
-:10461000E6DC4816007EF22B713F6E5DF3EBC4E7DB
-:10462000BC0D67E6A09D3171EDA9AD580F36FFE7CF
-:104630001CD41B7E037202F12BD82931278C5377AF
-:104640002E83DE5FD779C28CF6FCE386FE3908FF45
-:10465000D06189EE55059BCE10FFDC23FC2B69E36E
-:10466000781C31D835D140E7E92BE1F68938FFEEE7
-:10467000923FA722FFB234ABAFCEC073EC35D23934
-:104680006EAFEA4F55129CCB491817F3477E25F2BF
-:10469000F186F0597388FCB2B5026FE3DB93C7195A
-:1046A000343BDC24F2949804EBA913F8558FDF8394
-:1046B000C9403D5F8AD8806EEBBB66917FA3BEE99F
-:1046C000E2DF77190EDF2EB56C64DCBFA1D5D1FE19
-:1046D0008ACDD742FB4B7F0F3DC4EF71E5B9730222
-:1046E00017D1EF827D23297ED2D8CE285EB2EE5C30
-:1046F00009951F3D7B1BDD7BB2D8FAEF46B9C08A16
-:104700000CA4D7AF0BE9F59B4F4B381D7C5AC2E97F
-:10471000B8601CD8271636609F801D5284FA0ED8C8
-:1047200021A93D4C679FC43F27FBC422FC86A02ED5
-:10473000059E4CB0EEBF9454958ECB42BADA49F840
-:10474000CD00BF11AFE2F739651C5F9746CF2B7ADA
-:104750003E30A3BE1BEC4C4CCFE6D2CA2938EEB695
-:1047600061F2EFCE8B7DAEDBCD085EC1DD1904A713
-:104770000FD96E7F15E0E587B00EBC977EDAEF4F5C
-:104780004E87F74F07FCC9189FD3E8BF71B78DDE7E
-:10479000DBE65E9289DFD1982FF0FEA3CE59168416
-:1047A000F335BB39DD69F3FD26B22213E967B2A9FF
-:1047B000DF8CFEC9515DA75251AF9BFCECD24CA4DB
-:1047C000BFE1D639A384F3E575CD2397D3BD1FF898
-:1047D0003102DDDF24E4587073C48CF0BFA9991155
-:1047E000FE763FFDEB46A4DF8FBA921594931F3EF1
-:1047F000971C427E7FFA7052D80043AD15DF3FFA16
-:10480000D0D4B788F4C7678D94AF103CFCC7BB9178
-:104810001E834F27D13D9A9BBA6E3B83726E6DD734
-:10482000DC0F642C1FFBC7D2C3BAE6D1CB63F38B7A
-:10483000FFD8726024F2CF8F64CE276EEA7C8AF4B0
-:10484000D99BCE9F1D8FF9831F3EF79729C8CF8232
-:10485000CF9F9D827C2CF8D3B353B03DF84C72535C
-:1048600022FD646D29F79F68F2D1F586ACF3B3643D
-:104870000B79E06ADB5983DF29987C6219C501B4A2
-:10488000F6C985063FF69FFCF3EACCEB63DE6B8B43
-:10489000CA942F31E94475F2EA18BC4C2E35697E72
-:1048A000BA4BF38F883C04CD3FB22D2AF37B750DB4
-:1048B000C630E6F1AE8CF2F87BBCDF8431FFFC320F
-:1048C0003CEF35595EFC3E0FDE4BC7B8C8E99B0B89
-:1048D000C3742F3D6439EA8ED18356440D9124F47C
-:1048E00083742545501F5A11954F25C5F8457EA361
-:1048F0003CB905D5F81501BD1F23DE0F023F297213
-:104900004CFCA47E63C4A4C9A98530FF2FB6300532
-:10491000E33643FC23B55F253F4CBC9F448DDE65E9
-:10492000C1F75437FF9E8EA667E2791D4A40EF1506
-:10493000829E353A6A8B1AE81CDAA2551637941E05
-:10494000414787406C86302FA86BE94368A7B79D25
-:10495000BF2A19E1D5F6C61286DF8B38AD54590A45
-:10496000F1BDF35FB52CF70CE2C710FE318EF3C733
-:10497000017D601839F7A1E05BFF2879F7C13F8915
-:10498000BC03BBBA1FF937D8D52BB9DF83DBD5F110
-:104990007242E3BFDAB8AA38E7A1FCF703D25FC0DE
-:1049A000FE25FEAB96A8D46F54D7E24CB28BDF58ED
-:1049B00096A9DA878E5F207B0D199EA1E36BFA5AC8
-:1049C00030E43B6A413BC6C7F34F83CB24FA6E54B5
-:1049D000D02F919E1DAC3385B15D5B4F74198F0B49
-:1049E0002EF74AF41D104DFFD3F4C381F649D0EEE3
-:1049F0001AD41735BD30EAE77ED1653E13B55F6541
-:104A00000EE4944CC6FD59E9F9E4697C5CE0034787
-:104A1000D1FF79D5D724FA4E97A62F6AF819AF4F50
-:104A20007EDC5570D1EFCFED1178A9D1D7E838BA37
-:104A3000D0E4D47C81EF8D28A733514E7F66EEB34E
-:104A40000FAF77839C2E2DA1F718BD3FE9E7B23F4A
-:104A500091DD7D588C3B433BB7E80B95B8DE3C16A7
-:104A6000A5BCA8E1E467AEF0D30CD73EFF12E9F88D
-:104A700086927F2C1D5F57F2CF41C703FA9F39F111
-:104A80003EFF52527913E2AFCDD844F7A3D8CF4CB2
-:104A9000E4B78EEFA76AF6A4CC74787C34CF6C4070
-:104AA000BB27D8C0EDFEF674F555B24F5EE4F7EEC5
-:104AB0006F12F94A379E53A86CC70F8361FBB75C2E
-:104AC000E4B7B9F1C009930FDE5FB9519A88FEA02F
-:104AD000950DFAFDB467F9E6C6FAC1DB4774505C80
-:104AE00021F450818AE3D7E366D11FD23E328CB1E4
-:104AF000C746F4E34CC0E731F72D609E75E2F90C30
-:104B0000E1DF61717AC04FBBDF247F0FC685907EE5
-:104B1000CD5D12E585047BB9BFA3B18BF385F71B8F
-:104B200024E227EF8BFC8C60B395FCDB9A1EF181AD
-:104B3000E8B7E66689F4BD217A854F1F7759F7E01B
-:104B4000CF892FC6EB111987F838186F41BFCCD128
-:104B5000BC2912D6D7815D88DF250DAAEA95B97CDC
-:104B60007D2C4CFCC5A7F3A37CDCFB3BB223573E5A
-:104B70002BB14CD23BE2E22FEDF3E2E22FC78EE6FF
-:104B8000E23842CF50E03FF41FC6EB198D9D274C11
-:104B900068177C5E9CE59912BD5F708CCCFDAC63A0
-:104BA000BA2405FD4963049C2EDB662338CD797B4E
-:104BB0007526D2B9763E1F2DE6E7F5D19B9F54E2CC
-:104BC0007B53DE9615E4B73F7D73E3EBB9BCAE5A79
-:104BD000547C6F6332DA211FBDBD3E19E1F85328C2
-:104BE000F1FB48CF9C9413FA0F0B4B39BF01F976B8
-:104BF000BC84FCBFC26F2C837C4B19F4BFC4BF378D
-:104C00004BBCD78EDF2D42FC7B96C7B7DB4704E653
-:104C100051FD9E7C9E472C737C7DAA2B5D417DAF10
-:104C200014368B71D81FD9581BC657DAB3022F110F
-:104C30007DDC6320FC85F7F977270EAA24EFF08A44
-:104C40001DC63FC683ACB1505EA383FC37DA7761E3
-:104C500046801D2ABEA3B00CE3AEA5220E32DEC6EE
-:104C6000641C7F8729B07D1CC65DBA65EF267C4732
-:104C7000F666E27790E2E3315A7C588BCB6871E2BA
-:104C8000E1E23212CE339EE359EC774EB4F80BFBDF
-:104C90001ACFDF6C9DDA44F75F7B31469238EE32F3
-:104CA0007A5C82784AE938ADBF3E9EB6BDF849C20B
-:104CB000B72F1A47BBA164B8F9556E77C6CD3F2907
-:104CC000FDE36CB25FFEFA5FA924CFBACE92DC3965
-:104CD000DD9F24EE71F6713F759789ECF5D360077F
-:104CE00065C5C8B3F6717CDC9EAE59848F87A2D5AA
-:104CF000C9D8FF09F17CDB1BCB96A23E1D8ACA3CBA
-:104D00001F9B71BBE650549ECCF5832170BAAC2436
-:104D1000417CCA624B9C07F49EF017BC27F63DEB22
-:104D20004D6EAF0437F2F88122E82D5863267E726B
-:104D30002C2F5BD2FCC83989E20BCFF6139FAD5FF5
-:104D4000C3E3BB971C5FE8EC36B1FC047EDB9A3909
-:104D5000C46F2ED55FCBD00A9E32C89F2B4BC5F7B0
-:104D600086CAB8FFF6C5127E5F27A36962257EEF6B
-:104D7000EEBD61CF3B70B0F4D2E27CCF7B2EAD9F15
-:104D8000A138513C7068BFA997D86FCE25F6BBA15A
-:104D9000F8D2D6D77589E3EDBFC4F16E1997A8DFB5
-:104DA000FFA3F1CFF8F8667C3C343ECE99F4E2F5EF
-:104DB000216CBB4DBABD3F82D04D7DBA5602529593
-:104DC000D31FB4205F5B308DC703B6555BC27BA594
-:104DD000C1B8A806AF87CBB8DEA578CE84F0BB8873
-:104DE000A37DD1EA4CA0E3D3D318D90DA7ADE27BC4
-:104DF00048B23262319D9F42DFC369B7268E2FAD24
-:104E000014E30DC7475E29AB7CBC7432DD1F4AF842
-:104E10009D8AEA526E67289D8CFC354C56472CA122
-:104E200079D5112867D25EE0CF53238CF2FBA0DD49
-:104E3000B584F467D585EBDB25E25E19F38A5CE87F
-:104E4000A7CB00798B71913B303E427E7D85FA691C
-:104E5000F34DF2F0F97699988471ACD0389E57C131
-:104E6000D42788EF68718DE3A6C8EF574914D7E8B7
-:104E7000C5F5BF6C8878F6B9F8B9207C3D87148AEF
-:104E8000B7BC32EDE162BA172FE21C1B14DEE50855
-:104E9000DA19B08E0DCF5510FEAEEC99F6CB3AD4A0
-:104EA00007DD32C179881E2EECAB93C23ED4ECAB49
-:104EB0003EB41363EC8DB784DE9080AEDE2A4D40A5
-:104EC000A7BB246EFF865EE6F66F85D95B109B4F0D
-:104ED000F5BE80FFAA08F7C36A76ED785FD8900D1B
-:104EE00070A8B8D9184902395DB1B5CC8CFCBA624A
-:104EF0006B9E8DFC4AAB0F1A3478273AF78FC53A70
-:104F0000B7F5F6535CE2A9F87BE61E33B5EF15F86A
-:104F10003309CF16CA0D85722B8ADFB4998A319175
-:104F20005FBC1EF47E5CDFAA76BE5E2D0E521F5162
-:104F300067E13CA78EF66FC5B2BCC1358BFC866BB2
-:104F4000CF6C45B9193C7FF6D815E40730AB89EE34
-:104F50000B3C5B6624383C858A08C26BAE4C79BB3F
-:104F60001573653AEF8C7A2BD9E1192666C4EFAE3A
-:104F7000662CE672ACBCC6310BEB6C593AC9E1F257
-:104F80005E35FD7ACFA09D9F31776316C2E9F3E2CB
-:104F9000439ABFE02AB32FD333F98BC787D61D7F3F
-:104FA00083F2CCAEE9D3C787B478CF70F1212D3E20
-:104FB0001BACF944174F0ECAFD73D0AF52F1DC2978
-:104FC0008A0F073B25C5E91A8C1B050F9D31137C01
-:104FD00045BC08FA9BF1BD0A38F61119F8BD011E4F
-:104FE0003F7A1AF371CDF83D3D85F26E7F82F9B8B4
-:104FF00045F83D3D9E8F7B18F371CD78FF83E7E345
-:10500000F688FCDE60D7198A374DF30CC9A7A27861
-:10501000C42D927FA6479F4F45F5F87885D1C6ED00
-:10502000D060AF89BE771E3C6E213E5BD9B56A0C5D
-:10503000EA63DA77C81B315E10E35FFAC8E7B5E2CE
-:10504000FD9E8FFC5E2BC6092ABA3F30ABC4772287
-:10505000B998C2D42847CD68EF231C28CFAFABD274
-:105060008A70FD5CBF7EE7FFF7EB7F11BFFEE13288
-:10507000EED7D7F847B9DF40F7CACB7B7DD6EB63D5
-:10508000F8C3363FF70F6F73E713FDDDE5CF4F5FD2
-:105090001DEBC7AFE1F65BC65CB735F6B9713CFFF7
-:1050A0001E448694F87EC1768F61383D707B62FD28
-:1050B0002E713C605B0DE7239ABF7F687CC0FBA22A
-:1050C0003BC6CFFFD1CB16FA7B0ADDCF26913CFF42
-:1050D000F4B9A47DA87797D7AC1E9302F5F2934953
-:1050E000CCC5E5912EAEB0B2C6E0B3A6268A23F8B1
-:1050F00072E97BA1F1F1821A03F1F78178418D7C8D
-:105100008AEA423FBFE6CC7B29F8E9EBA7A4703BD3
-:10511000DA174FAD93BCDD6C68FC0006CE655361B9
-:105120001735DC4EF0D65AC82EF8BCB842DDA113B4
-:105130005BD04F3091ED6CC7EF4F4E741B14104590
-:1051400009E20A3CBFB35CE811F1FE01C40F94FB15
-:10515000F17EC1E7C5F93D2FE4FE5CD4F9B306C783
-:10516000D1DE8B3F77479974513FA32CE4565B4DBA
-:10517000F9363CB7D0020343FEDF56536571C78C46
-:10518000F79A87E7CDECC2388523364EC1E311F19B
-:10519000F1098D3F55747F3607CFFDAE2EEE3F0AE5
-:1051A0003AB93FB3E27025DD33195C27DFDF5DCE0E
-:1051B000817B86E98CEF8B59B89F8BFC0AE50B3E0F
-:1051C000E9C1BF37C0FCE9F4F70B82C7DDAD76E477
-:1051D000230BE4C9924AFEED017F37FAA396BEDAAB
-:1051E000300FF3812B964F3C81E7B2BCCE44794718
-:1051F0004B5FADA5EF8A6BF2AA62F9DECDF8F768D6
-:1052000096174B5EAB8AED3555D83EFFB1087AF65E
-:10521000D8425C1DD04BF438F4CE27FFF6C7483790
-:10522000158B85DFBB8ECBD5E55D8B4DFCE3567AC8
-:10523000397724EF53B29BCF7655903F3B13E3ADC4
-:105240009E413953F11CC89F9441F9F3F7CA1D4799
-:1052500019CFF39F00F207D793B198C705E3CFFFAB
-:10526000350F3FFFE1E4C970FC13E507FF7B3BA16D
-:105270005CC939287755B4A72F1B94BF4A27D4732C
-:1052800086C7BF7902AFD387D1BF660BFC1C365FE0
-:10529000A3F31FE3F7AE2CFB27F17B0BFB46F37F59
-:1052A0006BF6D07D02CE5AB947F08DBF3B5F1985B2
-:1052B00062C27CE58CC4F9CAD77448F41D1691AF5C
-:1052C0007CD4CC2A0F3A304F4FDC4B08FB49BF3916
-:1052D0007AEFAFB63EE2C07B09928262675DC70992
-:1052E00092CFEB409F213DA8EB8FDC2FD5C1F34B34
-:1052F000D775EAEF3F68E5112197AB613FE44716A8
-:10530000797C730E71BA0EFACC61D5857EA16FCB14
-:10531000B17EA1A01ACDD2F203C35C2E25CCE36BE3
-:1053200064FD94EFD7D82079511E7C693F918FE7B7
-:10533000F75DAA9FA8AD4CF885849FF99152CE0FD6
-:105340006A039284FAA8C5E05F4BF9BD8725255111
-:105350009EE8BD02DFE70B3FED7E33C783FDD3251B
-:10536000CAABC57B3178BEFB0FF3FCF9FDE53C7F92
-:105370005EF3CB6A79F1E306FDB2741F46CBA7D783
-:10538000F2E3B5FBA18B77DB22A85FEC3075389197
-:105390000EB5BCA2F9A88B601C467C673C7E9D5B69
-:1053A000CB2AE79751BF61F59BFD6509F49B33421A
-:1053B0007E3E56A6CF238AD1CB9F289BACD3CBA9C8
-:1053C0001EAF97FF4FF965E70CEF17365CA2FFEDB4
-:1053D0005B97D8AFA12C817DDD6A4DFCBDD0D4F1A7
-:1053E00082FFC6FDBD1136E47E0F976FED92FACBBA
-:1053F0001914E732519C4BE32FED297CFCB7055F74
-:10540000D1CA7382DF0CF75D49E378DE6FA3E47BDA
-:105410000BCFB1F480DE4F56D6A1F7934DE8CCD038
-:10542000D5274646EAFA57F4E6EBDA27474B74ED00
-:10543000979D2CD7D5A7F54DD7F59FF17E95AEFE5C
-:10544000957EBD9FEC8A734BE2EE1D71FCAE048C21
-:10545000887D6F96E5EBBA7EB90DFA7DE535E9F703
-:1054600035A659BF2F6D5C5748BFBF8276FDFE320F
-:10547000D07FEFF9F2FEFB4D1E55F8EF0BE8BB7F36
-:10548000BB6ADCF49D6BEDFE9FD6EFBF0137C3FC1A
-:10549000BB80700000000000000000000000000061
-:1054A0001F8B080000000000000B53E16760F851FB
-:1054B0000FC15BF918182EF021F8F4C01CCC0C0CAD
-:1054C0009C40ACC8C8C02001C4FC40CC06C49E0CA3
-:1054D0000C0CFF81F81B10BF05E22740EC0CC40741
-:1054E00058B09BE3C6CAC0E001C4DC40B3789889D9
-:1054F000B7DF8917C17ECCC3C0700E889FF1D0374B
-:105500000C061B5E27403FBB7E43ED3A2932F0FE7E
-:1055100006612131609A1447F0A78AA3CA0B8B2138
-:10552000D8C9D294D9950FD40F00F19321F08003FC
-:1055300000000000000000001F8B080000000000B9
-:10554000000BED7D0B7C94C5B5F87CBBDFBE92DD16
-:10555000CD26E44900370960501E4B80C84BDDF072
-:105560003252C40411828A2CAF10027914A9A5FF0B
-:10557000DABB0B2804AADE5851A37F6A17041B2D3F
-:10558000DA80D11B6DE02EA208D56A684551AB0DBB
-:10559000888808498C8F6AB57ACF3933DF66E7CBC4
-:1055A0002E89B6FE6FFFBF7BC3AF1DE79B993367A4
-:1055B000CE3973E6CC9999B3268385192E60EC1BFE
-:1055C000FCBB9C319B893136A62B6D573A86AB3993
-:1055D0005DE5B7F9BDCC6B66ACCE6FA5748B3F9D16
-:1055E0007907C3779FA1306867EC5EBF8BF2BFF08D
-:1055F00017525AEB2FA27A77FA4B287FBBDF47E985
-:10560000667F197DAFF157537E837F0DA59BD445EF
-:10561000692C05FA66458559C98C553D9393B71990
-:10562000725B668D4F504743FE15233366017C9FA6
-:105630004AFD31D5BD69E0E8AE7A1A9E9BD449FD9A
-:10564000104EED128E17B3325B8C7A5938CE3B97E1
-:105650000878F6D69A9CE4A8F50623BCDB4B00DE5E
-:1056600050287085AC39D1E15D8CF03697A8BC5ECE
-:1056700072B0263B3A3C0FD6ABB941C04B0F5863D2
-:10568000D41B83F536DC20F0EBE7ABC98ADEEF787C
-:10569000ACC75CEADF5AAD8CFEBEC9C6FFB7BB4ED5
-:1056A0005D2CF246CC263136AEAB9D3E652CC070EB
-:1056B0009C2AF315121FDC995F7F93CFD84D0813F6
-:1056C000DA0726B19011FA0F24B1E0FA2CA9FE4CAA
-:1056D000AADFDAF7EB6F52A5FA014394FA26D6A0B7
-:1056E00060F9CF518E80EFF7F97329DD28E4E7BE2A
-:1056F000A106C6B05DBA393808DADDE3F790BCDC44
-:10570000ED1F4BE5770939FC7721674121670FA22F
-:105710009C41BA15E5CC8CFDF95A4B014EFBDE7865
-:10572000B6D94DF2B598F05419C1DFB077C8F6CDAF
-:1057300000FFBE1B569DDE06F46F6B1EE63142BDB8
-:105740007B866AF2C5BC2CB9ABDE3DB34F38170D72
-:10575000257A97219CBB3D827F2A0C2CA2DEDD336B
-:10576000C2F52AB0DE5D9E30BC5064BF774D09D7CC
-:105770005B457C56584983BD3B5F763085E6230800
-:105780000AD1D784F48579F9EC80EB9456689F921E
-:105790009C97C6A0DDFD381FCD38EFDC4417AD3D2A
-:1057A000D2D907DF332CAC1AE10365F71B015FD3B5
-:1057B0006C7722D2E5F66B8B98328CB1BEA23C3569
-:1057C00050A464015CFB9C2205BF9B6643397C7737
-:1057D00089F2E435BCFC762C7774952762397C4FCE
-:1057E000AA8672C8DBE7F2F23BFCC089C15DF536E0
-:1057F000019F7DC4EF74FE1DD88AF4318DE6A98621
-:10580000F713282440BF83988EE9C27FD3A07B334F
-:1058100016DABBF0B50DAEA7BC86DFA6C17194D772
-:10582000F0B15DD82F6321A47D97F465DE5C311F54
-:1058300058773A277AB3A5F24CD593A0029D325FF0
-:1058400032B200B02013C413E1E9DB153103E1D912
-:10585000E3FC4BEEDDFC330D95E9A0A547053D3497
-:105860003A6CEC2FD3C13240A6C3C601321D2C17AF
-:105870009C9F0E3B989BE81C8B1E5ABF9B87C8FDC4
-:10588000C65D24F7BBF922B9DFB88BFF39FDD664BA
-:10589000C9FD5AB3E57E6BB2E57EAD39FF58BF4C0A
-:1058A000F5C064407DA5FD5D28E9B7AB99EF2CB646
-:1058B000473D87F349D373A6641FF3D9BBF809EBBF
-:1058C0001463F99170064B7A15E07C8AF5008EF727
-:1058D000FC705C3A3883F470BE16F8B0483DDD0DBC
-:1058E0000E1BA81F8749E1ED428688FE99EA6345B1
-:1058F0008EC8761E5DFF39FAFE9D8A1887E1BCFDD1
-:10590000BB7574CDD6E39326F06186F3D183B97469
-:1059100070B2F470DC029F90725E386EFD382E1407
-:10592000FD071469FD027A0CEB6AD70EF8D13A959F
-:105930006709EE04FD10DAF7E5295C07CE355EEB6A
-:10594000B640FDFD232DA1CBA1FC5CB0206881F207
-:10595000C94F1E75A21D53F1A451C572C33E1BADA4
-:105960002F6D3B142AAFB2B4DC3901CA3B9E34B26E
-:10597000EDD45DA601C7774AE81416E2F9521BCFB1
-:10598000566CDB7F23B62F6BB2301BC0AB787AD955
-:10599000CC09905F76C8C4B04AC5CEB5E6BE905F6C
-:1059A0001E541A300FF8D23A15C8B3057742FD7568
-:1059B000FBBE6C43FCCF359A06213E67609D70C3E9
-:1059C0003AF192A3257536D0A73CB87B1AB62FDFE3
-:1059D000A57840C301FE3B0F6620FE8F281E0BB04A
-:1059E00070457D3C7347CC97538D461AEFAA6D4A9C
-:1059F0009001BC65AC761AD2B302898378782C41C9
-:105A00009BD235DFCEF8EBA83F2D5FF108F407ED10
-:105A10002B1F573C38E44A03F3E13C6E7BDA56F225
-:105A2000901DC7BBD63CD881E3DC68C67ACB820B1D
-:105A30009FB2B911CF6DE66988EFD66DE6D2A14865
-:105A400047B6A06828E2F77F65FCEA8C5E1CEFAAE7
-:105A50009196ED46C083D943036739BAEBD933B089
-:105A60005EB923D6CF72067A9FD6EFA0B97858D701
-:105A7000F72F0D89A43F56D41B99DBDAD58F261F4B
-:105A80008123423EF63A88DE1A3F57B9F814D0F81F
-:105A9000B92A51F057EDC89F35AC3B3E77225FC81D
-:105AA0009E7651FA0B583731DD02EB3CD2EF5EB0F7
-:105AB0009FDC64977BE8FB03602761BA15EC244CFC
-:105AC0001F043BC92DEC24ACB71DEC244C77809D02
-:105AD00084DF1F067B1CD37AB0C7F1FBA3608F6302
-:105AE000BACB1FA0EF8FFB6B286DF0D752BA07F926
-:105AF0000669A33F48F59EF2D753DAE46FA0EFCFD3
-:105B0000F89B28BD5DD0D1399115E03AEAF43217FF
-:105B1000923D6986B7C004F9A4229E4FBD21506012
-:105B2000867CAA0FF24097BE2B430516C8F7ADE658
-:105B3000E5036E6193AC901F10E0E5D9B77B27D9E0
-:105B4000209F5DCBCB076F0D4C8A83FCE0202FBFDD
-:105B5000685768523CE42F6AE0E5C39BD9643BE494
-:105B60008787783EEF25EF6407E4F35A783EFFCF4E
-:105B700081C94EC8E7B7F2F6E3CF068DEE28EBEF0A
-:105B80001E937B31AA9C03CADB5E3503F266F74D98
-:105B9000A8128F2AA728DF68F252F9FB4ABB578563
-:105BA00075BED1ECA5F22F94CF29FF94C947E5F13A
-:105BB00006A580F2661F95F737C451BEC914A0F23E
-:105BC00011863E3C6F0E507981A15F01C27FC614E1
-:105BD000A4F26B0C8378DE1CA4F25FA8C30BA64072
-:105BE000FDC70DBEBDA8EFD62BBE32B40F99DA901B
-:105BF0008EFA4AB32B77E2E0D0CECC30D33CD8F348
-:105C000087FC87681EE05F32E64B1F46BB14E01C32
-:105C10002438268063EC194EDECB632538792F9724
-:105C200069705E2138B6DEC1D9F3F278199F97CB3F
-:105C30003538C7088EA377E3CA7B65A28CCF2B2BA0
-:105C40003538C7094E62EFF0693C2AD3A7F168984E
-:105C50003E67707D589FD23B7C46BF26D367F46B6E
-:105C600061FA7C4CF864F40E4EE36B327D1A5F0BE4
-:105C7000D3E72B82D3BF77E31AFDBA4C9FD1AF870E
-:105C8000E96332209CACDEC179EA6D993E4FBD1DBF
-:105C9000A68FD380F419D4BB71E5BF23D327FF9D12
-:105CA000307DD2089F21BD83F3D43B327D9E7A277D
-:105CB0004C1F37E133AC77E3CAFF8B4C9FFCBF84AA
-:105CC000E93384E08CEC1D3E4DEFC9F4697A2F4C2A
-:105CD0009F3C8233A677F88C3D25D367ECA9307DB5
-:105CE00026109C71BD83D3744AA64FD3A9307DA6DC
-:105CF000109D2FEDDDB8C6BE2FD367ECFB61FA5CBB
-:105D000045700A7CF5840F03388ED8709E3927D3EE
-:105D1000E7997361FACC213853014E4ECF70C6B764
-:105D2000C9F419DF16A6CF02827365EFE03CD326D3
-:105D3000D3E799B6307DCA88CE57F56E5CE3DB6554
-:105D4000FA8C6FE7F4A9B278263BD0BE4B649EED87
-:105D5000D0E492930D079C9037D99907C1BEA484D3
-:105D600076207C582BC92E543D9A9DE2616887CEDF
-:105D700070BA3DE8F7316AF6086BA1FD827D57A243
-:105D8000E40FFAD230E916C4D701565BA45D923015
-:105D9000364EB28712BD4952BE4F615FA97E4A514D
-:105DA000B6549E567291549EE1CB93F29965E3A549
-:105DB000FAFDAB2749F90BD64C97EA67056649F916
-:105DC0009C9AEBA4FA836A1749E517D6954BE543ED
-:105DD00082ABA4FCC5F5FF47AA3FAC619D543EA22F
-:105DE00069B3543E32F40B293FEAD00352FD312D02
-:105DF000DBA5F24B8E3D2A958F6BDD23E5279C7E3C
-:105E0000466707CAFBFFF5058CDB831966B20743BB
-:105E10000E33E5CDFB6C64FFEFC73CF0D3DC7706B7
-:105E2000E5CDCF2E7627E37E1A01C07A5FD0B7EC9E
-:105E300042F4F7DC3CDE77A10BBEDF6CF68D7045DB
-:105E4000F1477854DF3E03F98B5A14968EA9DB8014
-:105E5000699C51ECD72D5CBE3666E53F148890D323
-:105E60009AFE30FF207FD86026FB5593EF8DFD4BC7
-:105E7000D31746F4B3A1BFB964FB50FE7DB11DFB3F
-:105E80002B7A11E75995B96330E2A5EFC7923D56D9
-:105E9000EAC73AA08CFA790DFB89F07B590694E9A0
-:105EA000FAB1966C17DF453FC7705CB1FAD9983DDF
-:105EB0005E1ECF8072EAE75D5D3F1B0794EBFA89B7
-:105EC000E3E381EFA29FF7CE3B9E9C89F2782E58A8
-:105ED00049FD74E8E866B960A5AE1F3BF583DF179E
-:105EE000933F17760169C0674B4729C9C17FDA58CC
-:105EF00000E4C29C59FE6BCCB3B76C6C10F6E38621
-:105F00007EA11ECBE5FEA3A70D49349ECFE280FF04
-:105F100011766AD77E3640FBE2A5024516048C60F6
-:105F20007F5B296473C9AEE20137B9216D3A30F065
-:105F30006EEC678BC33308F26D4D93CD8BA3C8D342
-:105F4000D25AD3A9D648BF88B6BF99C472ABA1FFB5
-:105F50005D369794D7D2958A8B097F04E54FC0BEF2
-:105F600085C17EE0CFB02F6040AA774D7C9FF60EB2
-:105F7000EC6F30DF0AFB1B2C676C2DB53B21FCB4AA
-:105F8000276E578248EFCF7EF24313E9F1007B354D
-:105F90003D15FD6EFC6FC19A78F4F187F15B18E84E
-:105FA00023E5415D661AD2695F48FBDF8EA72DC1EC
-:105FB000ED48D79A4CA0A9A897CDD8EBB0C9CD4849
-:105FC000A26CA6612C63B3AB8BA7A6D12C52FAAFFF
-:105FD000023C67358E34410BD6666ABDD163EF82D1
-:105FE000CBBCA613481F2BFC4338D714423EA2FF5C
-:105FF0006B8BE4FC5CA676E581DF838DD9826FA292
-:106000005FB7D7847C2D4AE5F8CCC5340F8BB9BF78
-:10601000A3C4C5DB6AF8542D36B110ED4F03290C2B
-:10602000FDD18164AA779DB6CFD4E15762B27A8B55
-:1060300080AE250B8D44573DBE6FEE8BF71A86431D
-:106040005A73B7095D9B3DE13FCF2797B332DE9F7F
-:1060500046574D5E4E09FE9E40FE43FA3EF21FF04B
-:106060003E29F8DF25C79CFF5516DF4CE47FC7FDAE
-:106070004646FC127C9F23F8BEB456E6FB1CF49304
-:1060800043FD39ABB382EBB17E5D1F89BF307099A0
-:106090000EB5774D05B5DA0DFFB7851C5C57B3FB20
-:1060A0007964EFF565BAF1093EDC28F8305F478F77
-:1060B00039826FF305DF96B1C06D19E43F0A9AD0BB
-:1060C0002F36AF4C61A82FAA7EAAF1AD55E29B4FA7
-:1060D000E39B0EDF1B05DF6EFC09E79B1EEF56C13D
-:1060E000B7D6BA8F4D2CBB3BDE7A3C17ACD18D2B8B
-:1060F000A0E75BAD38777099D1DE29F616F439192F
-:1061000051FF9AC22BFB9C8CD00BD716154BF9B9BB
-:1061100025F3A4FAF37C0BA5F2EBCB964BE5F3AB9E
-:106120007F28E517ACF989547F6160AD54BEB8662D
-:106130009354BEB4F62E29BFACEE7EA9FEF2E03633
-:10614000A97C45FD23527945C36E295FD5F4B4542B
-:10615000DFB06FC8D5285F2F1D3532F4977DEA79FF
-:106160009FFC759F7A4C1EAC538932370EE5D94D92
-:10617000F27CCA9F4BE969BF87E4FD8C7F2CA56D3B
-:106180004D07ECE87FAC8A03BD9F0876B8F1CDB52A
-:1061900035FD70BD81F6E3196B36B6AE0D40FE00DD
-:1061A0001E46C1BC99516766A1510CA4BB6F589E95
-:1061B0003B8C11E5AD3D94D7A92CD4A77BF98CD6A7
-:1061C000E8DFDB958EC119E8277CC3C27646F8EB81
-:1061D000BA9F57B04CB42B62959F35B0B2C8F3ACA0
-:1061E00093467E4EE2344E3A698474A599CFFF956A
-:1061F0007B32263127E64383ABA3F85DC2FD350031
-:106200003269C8E71C69DE2FABBBB86B9E33EC2745
-:106210009BE476797094F47D45FD04A95DAEE27B44
-:10622000D708F5CEEE37D27ACD4207065C330CF1B3
-:10623000F39EC4EFAC2985ECAE16BFB7CFC9818CF5
-:10624000FDD15F48E9ABFE224A5FF397507ACCEF6D
-:10625000A3F44D7F19A57FF65753FA8E7F0DA5AD98
-:10626000FE00A527FC35949EF4D7527ACA5F47E911
-:10627000697F90D233FE7A4ACFFA1B286DF33751EB
-:10628000AAE9CF9EE4EFB4585FCFA0FC459133F369
-:10629000AD6C5DCDC42E398B532DEB50CE34FACE80
-:1062A000A8B308794895E42111D76192B31ECAEBCF
-:1062B0004C420E63B58F5E8EF2D6F77B9037C6D612
-:1062C000911CCC1472F75DE58DA1373E05E529538D
-:1062D000274FB21C6A72A4E9815CA568B83AA64B44
-:1062E000AE661AB99DA4C9D5CFD14E8C626FDDA020
-:1062F0002A62FDE3F611F36518D07E5B25FCFECC27
-:106300009D4EF94ED1F77A00D782F5D4602EAE2398
-:106310009DB97F1B8CFEF1CE6316867EF858E3D3C1
-:10632000CB4B6CBA7B69FF501A84456D54F7725B96
-:106330001CA7ABCDC00A591E9ECFE61FF3013FE359
-:10634000FEF3E23CDCD7C27795915D15F41447F17A
-:10635000B73394F1B49EE9ABD53FF5C097F9786EA9
-:106360003E53CCF3B803467EAE1D7AC8734DC4F9D4
-:106370000CECB7D3D1EFDC31C8EC22FB21D457A60B
-:1063800063B0AF44C703833E1B8CE71B9B400E7179
-:106390007E750E1C9CC0CE231F3DE9F99EE8B928EE
-:1063A000D8B797F434333C37027A6EC7FB2FBDA5BC
-:1063B000674F7AB227FD786233A7B353D8A7B1E805
-:1063C000DC3E09E65D1439BE475565396603F97947
-:1063D00087467FDC9746D0FF52BB9BEA3FB7EFADC5
-:1063E00001ADD04F67E385098C9FE7905DD7F1A49D
-:1063F000B0DBDD99321F5BFB125C0DCE734FBE3EEE
-:1064000000F7C9B76106E6D993F145BF5253BAE028
-:10641000F5F61C3ED6B8767FCBF9D99EAACDCF969D
-:1064200001284F9F093D10737C3DC9298E0FE05C08
-:10643000A5F0F16D3016FD0EF54C787CA3537A353E
-:10644000BEAA04335346007E0EB3992530B643F5F9
-:106450001D54691FE7690DA09F625FBC673DB0A432
-:10646000CA79E6E5901BDBC9FE8C15F536976C3FC3
-:1064700025BA64FB29C315693F751E7AC8E903FC78
-:1064800056A51B5C2747E13AE715EB1C5F5735FC27
-:106490002A1AB25C76098E9CEFAC550A1B489EDC2A
-:1064A00009B3A39C9769E9AA74B3EB24AC5767EAD4
-:1064B0007312B0DF337EAB8BAFAF2E17EF37DD1526
-:1064C000B9BEAE5C1347F535FC62C1FD67E3C75842
-:1064D000237BD78AEB2294E5C4AE1F939FEA2766FD
-:1064E0003A976E367D86F6BB2D57B3DF55CA6B7073
-:1064F000AB1A8C01CB08FCBE4BEA0FDAB9B5336698
-:106500006C175B6E54764AE327F0DF8A07EFB46FAF
-:10651000B5129F7D003101E0B5ABF61A94AB132A9A
-:106520009FCF55424E2BACAD669F9BC8DD82F2BC1F
-:10653000682CD326CCDCB7404F7FF0A289EE69B13E
-:10654000AF007A7ED7558125ACC8894ECF458D2BBB
-:1065500066E0BAFD8141DB0FD7E6E3B8CF314321D6
-:10656000EAA573EC8FCE5111F3758889FB63580D42
-:10657000DFE704E01F8E6F69ADBCEF595627E74B8C
-:10658000D9AC54D4B7A55B4C2C08B82FC77D933633
-:106590006ED0BF1926EED758C6AA37E03EFD5E136F
-:1065A000F7F72C72313513F0AAF88F5FE6A3DFC737
-:1065B00063E27687769EBC3C89E35D3E3B68F642AB
-:1065C000FD771B47CD018D0BED831BC8FE29669E11
-:1065D0009DAC3BDD17D7C8F8F584BF1E5FCD0EEA32
-:1065E00076AE2DF048AE57BCC1287AEE329322F633
-:1065F0007F7C7ECC36C9FE9C7926D9EFA3C9814920
-:10660000C8C109D577B5690CE73BF251513BCCBE07
-:10661000887AE6AE7AB3CF57CF82F58C546F9E2935
-:1066200005EB754CA3FD3103791ADA55CFD605EF8A
-:10663000460E4FAE57F11F8F3D15007929FFED3DF6
-:106640004E06EBE6076A6DAA07BEAFDC799BD30B5B
-:10665000E96935E0447E7E10341646A3C796303D86
-:10666000BC7605FD69423E594D80FC149FED34B95E
-:10667000C8CF5F6F0959404E2B1B97CF60C3297F4E
-:106680009CE7377E64C47C93CCAFF25FDF93EAE68D
-:10669000F76CB83F8985C8CEADDCF1DE345C2FAA3B
-:1066A0005807C999BE1DF6FF7912CDEB85E684EE39
-:1066B000E58027F913AAC42CAB6AFCF9474627E604
-:1066C00065F92813F62AD209F7F9B7991CC9A7E288
-:1066D000217B09BB04E7B9460F16E476EBFA47EED7
-:1066E0001B7E1CF039BBE345A73234523F7039EBB7
-:1066F0006C58FC2BAB21B61E6903398CB48F00306B
-:10670000B57337097BBB99A72B4D2127DE6759B994
-:10671000CDE40109642B1F3332BC07C0DEB004D1C5
-:106720002FBAE2B1E75F1B0F745FB1DB943C830FBC
-:10673000C7AEA476F1A50AFEB726AF8B0FE54F3C96
-:106740006F760FE3DF6F49EAE2C78ADDFBCD6C5855
-:1067500077FA4D6ED86F6EB547E14BC3F169B8CE8D
-:10676000AE7FE4AF66F4277EB04F616959DDDB97F9
-:106770006D7B9ED63BA413F151F029CCB76EFC0A79
-:10678000CD7C6634D573A11E8CC5AF6542EF823CCB
-:106790003FFE0CDEFF79D3E2C1F1973D7E9313C734
-:1067A000F1BE5ACDE5FA97B7A5E2FC2E3305525D4E
-:1067B00094F2EF650FFE88E46DD9911FA592BDC0DC
-:1067C000BC1906D2C5810C1CDFD2ADD7D2F84A99CC
-:1067D0008FE4AEEC97C622BC8FF8A9CA0A77479916
-:1067E00017716685F0797F3B183230BEF7717F896B
-:1067F000FAEC8F46BA17C5D80FE9DED88FC45861B6
-:10680000E5A3FCA756CEA7E3424FE24496E475C742
-:10681000C616E4CF99FEDE343CE7003A0404BD948A
-:106820006F00AEF1C8D434CE1FE656F3453BD0EF2F
-:1068300093F13BD66F31796DC3A576421FF2FE57B7
-:106840008BFE01EF385CAFDE4F8D6EEF8D11E38371
-:10685000BF1616215F11F39BCFF71D9BF8FCD6E600
-:106860007BB0B810CB3F7995CF1F6C87EB03E01559
-:106870004AA3F2FDB315D207B0AF8E36AF7798C4F6
-:10688000BC96CBC152A4F51EF0569584483901F848
-:1068900049447FDA07976E817611F65715F647F56A
-:1068A000CC5DDF23D68765420F98CC30FF2FEE9A60
-:1068B000FF6C2B9FF73DD9932B4DC1871FC0F9FA71
-:1068C00086C51370E37C3515E1B83FDC75E0B5EBA8
-:1068D00040AE3F6CD0E6A9AC3FF5F3B46CCF1816D0
-:1068E0006D9E7E6887FD55B4790ADFA3CE537B2B5E
-:1068F000C9F1F7AD3F35BA0D35CB7A13F5E033EE7C
-:10690000D8F4D3EBC1DF9BDC4447BD1E84BF57598D
-:106910007E77B9D3E44D93B3F2DF545C80FA262C32
-:106920008F9ABC85E5519337FD3865BAE9CBFF2ACC
-:10693000F4CDF5D6C26BD02EB67630DAAF14CC36A5
-:1069400006719F6CFD84D17C9F74433CE5E71A5B24
-:106950009F409BEFAD8AB9C3701DBF9E054CFCDC08
-:10696000BCD64476EA57DF7C3311C6739DA0EBF5A5
-:1069700040E6AB800F25AA128A033CE7A92C909031
-:1069800084FE62859D88C0E3FA32398F7F97A576B1
-:10699000C1E9A9FEB7B5ABBF6B7AC4CFCFAEFE8459
-:1069A00029ED2FC0708E90A3E2667E4E51355A09B4
-:1069B00066D3FC6B558B22F6098F99B99D7164CA19
-:1069C0003563907E05738725907CD70EA17D6095F9
-:1069D000D05B9D017702EAF3CEE61CDAF7751E5A0A
-:1069E000ECF045D15F07849C3D2FCE59DAED4AADDE
-:1069F00011E4BD9D7590DD12B0DBA2FADDEACC0694
-:106A000061EF08BEC19F11FA2F1172380F9A26E468
-:106A100045F06DF6551FA8CEEE7CC0BF1311FB8666
-:106A20007F94BE28D748DF03B6D6694551FC338F23
-:106A30000A7D7DD9B35F98719D9BD25CA0221DA772
-:106A4000D88D92BF63BB365F87B2A188D765CF2E42
-:106A5000BF630CC871D521A3C706E3AB6AFEC8ECBF
-:106A60008BB27FD3D313E1A3FDD86AE6F6F151537D
-:106A7000D152A4EBD16BF979EE9FCC9E8A6878CE87
-:106A8000B6723CE7B1A24F472BFF7AF42D98EB0882
-:106A90004D027A74DAF9FDE4EEF2C7E77DA74B09FF
-:106AA000AE55500E8D3C9FCCEFFF4E63BE3B262A69
-:106AB00034DF2F8FD45F054DC58FE17D96CA66C543
-:106AC0006580F24AB5D58C725CD5B45B45BBFC07DA
-:106AD0006EFECE82A9D5C36647F8B75ACDDC9F7447
-:106AE000E06FD7CD47FA7E3CDBC2102FEFD08F9CF2
-:106AF000B8DE7FDC3C8AE641AC71FDC1EFB9660AC5
-:106B0000FAE3CD5C9FE9E5615A72BC94BF7632EB43
-:106B100087E7BC97595A6FF244E1DF3A0B9FA7BD54
-:106B2000D66FD6FF61FA6D22E8372ED7A648FD361C
-:106B3000DDC2E53E42BFA545D36FABD6BAD3502EDA
-:106B400056EDCD4943BEAE3ABC34259A7E7B41EC2E
-:106B50006B0F8B7BD2EDFD40BF8D88D06FFD40BFAA
-:106B600045F1838FB66876670FFACDFADF33FF5EA3
-:106B700040FD1665BC5708B9D3F45B61F35AD26F78
-:106B800085FD8CD27DA4CB2CC28E8BA9DF16DE7343
-:106B90002DE54D9EF828F2837445FD7658E839ECD2
-:106BA00007F5DCCF2CDF4ECFCDB3727C7BD473FFE7
-:106BB0004D74D6F4DCAAFE0AD92FDDE590EBB95569
-:106BC000595CCFADDACBF5DCAA415CCFE9F5DBA4AB
-:106BD0006EFA8DB7AFCC85F6B44FCCBAEF06BCCF0A
-:106BE0005762F258A1FE0CB7F6BEA07A4CA4BEFBC9
-:106BF000992586BEF380BEB3F7ACEF5E417DA792C8
-:106C00001E1B88F3482F1FD307C64BF7D58E7E7106
-:106C1000EA37BFC5F9F20723DD077ADDC0F743FB8A
-:106C2000BE38350AE7DDCB880FCC979D42FEDAFCF3
-:106C300063499F4E1ECAE77BC5A1385A272A1B15F8
-:106C40003EDE5B94A01BD781BF7D4EFBE4F97BF950
-:106C50003E79AE85D383FDD8C8DF4500091646C806
-:106C600043C9E7E5E4E72B519915EDD70587A67FE2
-:106C70008076EB82CF6BC8DE5D80DFF17EC5EED61D
-:106C80000D99D0EFFCE50AED3798B80FA1DD97B864
-:106C9000BE793FDD5FD1DF83D0F4F9FC6AF9FB02F6
-:106CA0009D5D7F408C13EC59A20B7BC518D53F77B7
-:106CB000404F0F0F1F7FC56A6E1F87E901F4712BCC
-:106CC000DDE9011C9DB130B56BFCF39F8471257724
-:106CD0008D4BA3877E7CDAFE6481981BB1C6ABD155
-:106CE000AFDB78357AEAC6FDBC45D84517B36138C5
-:106CF000CF5E37F8EE188372F17B183FE03367DE22
-:106D0000A0B4483DFCA2D0E757F98E4F497523BD8A
-:106D1000F8FBBBEBCA763F9F0AE3B8DA9B9587572F
-:106D200011AEFD9BD9877E8403B60ED26B9A5C5D53
-:106D300068E572FE7701E7685FD7145A3F9A141727
-:106D4000CD97904E6F897B6155404F9C8F554D621A
-:106D5000BD0179C3F9364D5B7F90FEF09F573573C7
-:106D6000FA57552B44FF99ACE320D2B73259F1843E
-:106D700000D4B4A6DDB7E13DAA176CF01DE76D990C
-:106D8000E2D9CEC961CF488D2A976A34B964D54318
-:106D9000C8AFA0AD830BB05E12BE17793D05ED13F1
-:106DA000BDBD7199A5E528E271D98F4D6C1BEB6EC5
-:106DB0007F68FCCE857FDF44BBCFD383FC0E12F609
-:106DC000E50B486F3BD2B5C38C725F15E2EB86567C
-:106DD0005EA5BAA7107D347A37C1BA309AD31BDFCB
-:106DE0007DE9E979B5964779C6FACD8A09DB5F096D
-:106DF0007CE80345930D5F1CD4E417DF89E9E98241
-:106E0000FBFF8C88F98E7A29F2DCB1B2E908D165F2
-:106E1000FA6A30AB22E88EFAEA7CF4E9361F9AF679
-:106E200047BD07F56DE7C38556793EECB375BC38B1
-:106E300002FD5B7B15D207AC3951DADF5F61E5FB00
-:106E4000A603361FC96DC76113DDF7D6EB8DB1827E
-:106E5000FEB89F887C0737190782E7BB2E1B7B573C
-:106E6000C3239BCB4FA4BE7EC1E6233EC5823F4DCC
-:106E7000C08F652F85F1C5FEF03CC52DF7A75F2FAC
-:106E8000343F4F4FE3BA46ACF7DF755CE1F349D6C8
-:106E90006266DC9FBFDB1C71CE3447F8F9353F5882
-:106EA00044BD999631B1EBA1BF2504E37E61D74380
-:106EB000E4D73DF7E8F19928B72B7E676456E07375
-:106EC000DB2E070BF17B14665C57CB1B8D51CF4536
-:106ED000185B4FF8ADF8AD83F44AF91E4B7006B459
-:106EE0002F7FEADDE1E89F6A5BC7F54BE051211F88
-:106EF00081D6E1785E5EAEF2F3623DBC1F0B79395C
-:106F0000FB747C09EA47A59EBFEB2C6F986BB244DB
-:106F1000ECCB2BF1C08DD7A37BC8814714F28377CC
-:106F2000C76F2DAFF708D77BE54DA620BE0F2DAF5D
-:106F3000DF46FBD9AAFA8FCC68C74DFEED636447E4
-:106F4000543519653F61BD3164213FA6F138A67AF9
-:106F50007F5D656305CDC7CA06E10FD3F98B56FC8B
-:106F600076EF530120CD8A277EED443D73A665A7B9
-:106F700093FC70F5DCCFA6DAD5E87EB89EFC6F0DE9
-:106F80009BA2FADFCEE07FC0FCDB6A95FD6FACBE52
-:106F90004FAFCEC1573CF6E983782E7476CF870F7A
-:106FA00022DE2BBFFEF8C19FA27DB2CFE6C2F5AEB6
-:106FB000EAD1A3E457D7DA3D25E655DB23BF7EF8B7
-:106FC00001987F6D6F58E8FE55DBDEF707B8619CCE
-:106FD0006DBBBF4845FFE5EABD5369DFB2FAC9C9D9
-:106FE00069E7BB47827219ECC579889E0F071A8D35
-:106FF0000CDF419E3B66213B23EC476DA8E07E6998
-:10700000B7F09FEE8A7EEEA4F9FD2A1BAFB9FA52C3
-:107010005CF71A4D1E377D177EC09EFCA6AF023F5F
-:1070200047F4826FBB845F5CC7B773F81FC09F3F94
-:1070300059657FF3A78D4B7FF5009635F689E937C3
-:107040000DF5825EDAB9D636ABF71D2BCE873DBF84
-:1070500021FF34F20B6C6ED6F6D8A703D0DF70DABE
-:10706000D47123DDBFD86BA17B42E57B5FA7F9D14B
-:10707000F6E4113A2F62E25CA98D85FFF83980D8D9
-:10708000CB54ED70707FABA03BFA63DD4EFA2EFC63
-:10709000AE5C6E357F6C2C3F6C1F9BB8072ECED933
-:1070A0002A76BC65663ABFB63216F9745C3A17D4D4
-:1070B000C6AD87E7423A5C12799E10CBCF2DF468BB
-:1070C000984FFC1CA16D9B385F089F1B30D62F0F7B
-:1070D000EFBFF3F3EEAAA0F23A8B321FB5F304A789
-:1070E0004D371F83BD3B47E819DFEF460FC5C6F795
-:1070F000AD1A5DCE7E155D1F0FB129E2FD812FD740
-:1071000016B1EE2C10EB4925D08BBF27E3F89E1566
-:10711000FBBBB38F1A83B80FDED07080F4AA7E5EFB
-:1071200057B2E8F143C6DBB83EA96CDA3F1CF5CF95
-:10713000D9679F26B9ABDC75DC1C003807EB9F30A4
-:10714000B70EED9273D4D7C1087D7DF6F1FDC3F97A
-:107150003907DF47EAE15F21E05735CBF0AB767DB9
-:1071600024C15F116830BBEC3DF77346F5CEC5F125
-:107170009E6931515C94330DC6C268F14A86622023
-:10718000A9942E3A6D70F0F771C62433D991AB1DD6
-:10719000638F2524636A76E33E7AFD5A7E1F72FD73
-:1071A000CF3CE9C897F58973E81CA856474757B202
-:1071B000AB00F7D7AE2945A351ACF47A20D16B9040
-:1071C000F05EED284CC3F7DCB70A7B84A91E7ABFBA
-:1071D00067744E2BC471185D06972DEA3ACAE1997F
-:1071E000EC45142FC2E492DFD37DEFF11FDCFDE408
-:1071F000F80F817EFF68FC07467130FEDFC77F080D
-:10720000603FFF02F11F42E4B7D1E23F247FCFF19C
-:107210001FD63239FE83E06738FE83E0E7FFC67F82
-:10722000F8FF2BFE8331EEEF53303E8316FF21250E
-:10723000CE3C3532FEC38571095323E33F8C8B4B23
-:107240009F1A19FFE10771595323E33FCC8FBB68A5
-:107250006A64FC87AAB8515323E33FAC8D9B4879FD
-:107260002DFEC3DD7153A7CAF11F664E9D02F9B60C
-:1072700038DFDF71BD8A15FFE13D9C2C637A8EFFFC
-:107280000070CC716362C77FD0C38915FF01E02411
-:10729000109C18F11FBAE11323FE03C049273831AF
-:1072A000E23F74C32746FC078093457062C47FD0D9
-:1072B000C38915FF01E05C1497123BFE831E4EACA0
-:1072C000F80F006714E11323FE43377C62C47F008C
-:1072D0003813094E8CF80FDDF08911FF01E04CA541
-:1072E00071C588FFA087132BFE03C09949F8C48895
-:1072F000FFA087132BFE03C0994BF8C488FFD00D65
-:107300009F18F11F008E8FF08911FFA11B3E31E203
-:107310003F009CE5042746FC073D9C58F11F00CE2A
-:107320002A821323FE831E4EACF80F00E7A7042722
-:1073300046FC876EF8C488FF00706E253831E23F46
-:1073400074C32746FC07807307C18911FF410F27CB
-:1073500056FC0780732FC18911FF410F2756FC0788
-:1073600080F32B821323FE43377C62C47F0038F501
-:10737000248731E23F74C3E7BBC67FB085062A3954
-:1073800014FF81E24486E33F247FEBF80FCD88EFC2
-:10739000FFC67FF89F19FFE166BBEFEB38F2837EF3
-:1073A000B7F80FB6F86F17FFE1667B517C3CEE2F04
-:1073B000BF65FC87D4F86F17FF01FA498F1F13BB15
-:1073C0009F58F11F7274FDF414FF01FA1974DEF175
-:1073D000C488FFE0D1D1EDFB8AFFF045DCF9E33F43
-:1073E000FCCBC559806D0A9EFF149328B27F99B8D3
-:1073F0000BD7C6FF93E32E90B1F0AF1477417BBF5C
-:10740000DF60C2F5EA4DC1F7D7845CBC25E22F1CD2
-:107410008B197F217815F94597CBF117A60B3ECE36
-:10742000F3C9F2309DF1F386E953B278BCCC325DFA
-:10743000FC855CF9FC7A86EFC81400C7AEF2C8E39D
-:107440003822E46166C947CF217BAE1E1B3DFEC2D8
-:107450002CC18F621D5DA60BBE158BF47A7C920247
-:10746000F23CA3EC888A749DE96E55C9AFFD038D8B
-:107470007F6E897FB3055C3DBEB304FF665DC9F9CD
-:10748000A7C7FB55E49F13D2B251C43F3DDE7A3CFF
-:10749000F5FC6791FC8E889B51C0E4B80B93AD72EC
-:1074A000DC85A92E39EEC215E972DC852BDD72DC94
-:1074B000851FE4CA7117AEF2C87117AE1E2BC75DE7
-:1074C00028F6AED5C57DD8A48BFB70972EEEC3FDF4
-:1074D000BAB80FDB74711F1ED1C57DD8AD8BFBF020
-:1074E000B42EEEC37E29BFB8E6B0547F69ED1129F2
-:1074F000BFACEE0DA9FEF2E071A97C45FD07527903
-:1075000045C34752BEAAE90BA97E6FE33EBC2ADE03
-:1075100003BF26DE031F13EF81DF8C11F7E1AF3FBE
-:10752000FFE2B6C8F7F85FFEFC9BDBF03DBE41BC56
-:10753000838D15F7215C1E23EE4357FB6F1FF72148
-:1075400025F99FFF0E3FC7CECF3727C44FCAB1A73B
-:107550007CF777F8D716C9EF99E796C8EF9973ECDF
-:107560005C9FCFF3C9EF9AAF2F93DF3597D97CD9C2
-:1075700088873EEEC384786F8E1DF5A5789F1FC265
-:10758000F7A9B0363E8BEF53217D0EE33E407A10D3
-:10759000E33E407A08E33E40FA7B8CFB00E94B185F
-:1075A000F701D29731EE838A712302226E448D88CF
-:1075B0001B512BE246D489B811411137A25EC48D0C
-:1075C000681071239A44DC8810C139E13F44E949CD
-:1075D0007F0BA5A7FCC7283DED6FA5F48CFF34A554
-:1075E00067FD1D94B6F93FA7B4B7712334B9FC33D6
-:1075F000DA0D66EC9FCBB126A733EC033744CA699A
-:1076000091FDA20D28A7B1E245CC459AA6C48E17DC
-:10761000112E8F112FA2AB7DEC781169A3BFBF781B
-:1076200011FF16CFE5F51F8D1731BF5A8E67B06079
-:10763000CDF9E34594D98A56A35C6AF2F86FF1FC60
-:10764000BCAAA77811DBEC8A58AF812E6877015D60
-:1076500068BDEEE1BDFD738E8773713FD1997BD11B
-:1076600079E31CE8E52236BD795C83EBBEE738118F
-:107670003DD155ABFF66398F5FF06FF1E78F5FD07B
-:107680002D4E444FF105067D467AB2B771227A5AE3
-:10769000177AA2E7ACEF394E444F7AB5277DFAC787
-:1076A000E99CCE13E2CF1F8F231C17CEDA72901AFB
-:1076B000BBBC34B555F10EBC60B68BFC27EDBBC42A
-:1076C000BD312F73BB52F93B75B437DBF7240C6720
-:1076D000F47EDDC5BCC09F78F15DD9B57F3F9EA724
-:1076E000DFEA64DEC4248A07EF36E6E03E6CA415C8
-:1076F000FD29158D1FBDFC3B806B6B36D27DB276AC
-:10770000C0A185EC3E6F22F22D9EDD4EFB743CE362
-:10771000FAA64FE47B66DDEF37609588F39BA946B8
-:107720003BED9B3AB7F27B9E4676F17D1347D37DC6
-:107730006A167413FFC84E5D21F0ECC414EBFBAC69
-:10774000643F2E3BFC447E88F1F3CA48BF419F4210
-:10775000D94F5367730EC777952CE06D41FB7B893A
-:1077600080975224FB6F3E5C547808CFE997F84A23
-:10777000E91E425A89ECCF61E2DD386EC7C2F7E5F7
-:10778000009FD226853DA0747F475ED67CD706DC5D
-:10779000E72C0FEAED6F968B7256CEE23CB8EF5DA8
-:1077A000512F973B1CE23E879DD97B45B7D60BEF07
-:1077B0009B987C5EBA7942587F9783EEC32E3BBC80
-:1077C000D88CCCB2A4CB74B3B965BAC5E7CAF4D12E
-:1077D000D3CFE191E9A3A75FC258D9FFA5D14FBB91
-:1077E0006FA832715F34C8EF91767B87DFB48DF07C
-:1077F000D4D34F4FAF510E714FA28B5E45D654522A
-:10780000F98467861A22F9D6CF874C7B48C1FFEEF0
-:107810009F1C5C4BAD3C0E15F5563A07CD9425BC2C
-:107820005D3CCE078C2BCB3C341F70478FFEDD7840
-:10783000F66721F7EFB26F20BDA9F8B9E38BA0740A
-:107840002BCADB08FEFB0BE4AFD27E3781795CB834
-:107850008F6AF05BDD4B543C1764EE2503F13CD09E
-:1078600045E99DE2DD6FFB5046FBFE86D027A978F7
-:107870008E76675EC74CF43F542D6545B87EFDC8D3
-:10788000C9DF5D6C12E90827F7CF6C2E3230EF6844
-:10789000FC1D1E635041BFABCB7BF872B4479B4DC0
-:1078A0006E7A47ECEA78F97A2A1F45EFA3330CB5D4
-:1078B00023111FA84FEF6BDB9BDF752E8ED0C36D9E
-:1078C0004D770FC1FBC5F71BA2BFEB2D7568EFDB32
-:1078D000F8FD8E115D71064A1D63281EC19DD9D029
-:1078E0004F657127F15193CB0982FECF954E27FC4E
-:1078F0009E6C56DCE8AF9B66BCE107C300BF7147D6
-:1079000055AEBFC4BDEED1A2FED3CC938EF88EBBD4
-:107910009429387FC6BDC13C0124717529DDA7FBC0
-:107920009D73DA21E4D7946690279C0F67ED1EBC07
-:107930002A3FA645BE2F9738C57700EF175E728C99
-:10794000913EBBE498AABF1F63C4FDFEB856F9FB85
-:1079500004DDFE739D26774E968A72B7E52B23E1F0
-:10796000D5DEC13CEB006EFB92BE746EDBFE0923DC
-:107970003BB1FD2B6361B4FB25773BB8DFEB7E3376
-:1079800023FD7D7FA99DDE393C5B5A7E01DA179F7E
-:10799000FDC47741343F65849D96C0DF9F7B13D83B
-:1079A0005894C35B154EEFDA8CA228EB9626779A93
-:1079B0001C6AF297511AE78B765F33D9C9EDA34958
-:1079C000A5B98A19E5679FC290AE6DEB00AFF3AC25
-:1079D000DB01B62E13F1A96AFA98EE61599B95A8BE
-:1079E000BFCBF384C3C9EF03AE0BACC5FB1737C3E2
-:1079F00024423D9561AECD8A063FC0B6905DFA80C7
-:107A0000C3CDDF0D58451C21B53603EF23B4354DEA
-:107A1000BE7203E0F900CC07E4EFFD260FE11DA8DC
-:107A2000608CEE930A7F5DBF996CDBE608FB77AF55
-:107A3000A3E030CAED6107B71BFBF83C0AE2EDF9A1
-:107A4000FB5F9D08BFFD730BF1AFAFB037B5762775
-:107A50001D9C3E254EEF016CCFCA9249F9787C4EB1
-:107A6000F7923EE837077A47B1AFB4753DC9C7E82A
-:107A70007C22C96E089272F27ADD2EE9BE7780E62A
-:107A80008D360F584861F85E5FD36F4AB31272802B
-:107A9000DC8FB6DA4378FF2CA90CC69D8CF13CAC88
-:107AA0001C5E8B7A56F66B813CE6A371CFE8BD3F36
-:107AB0003A5211BEA6F7347D796B22D747B7DEA5BF
-:107AC000523CD0AD6AAB0DFDA9595EF7240C4D9325
-:107AD000A4BAE95E4AFF323E0FE3737E9918B603FB
-:107AE00060928FFCDAB820DA7BA60C94A714A497D6
-:107AF000EF4307A4C30F753C8BE682C7C6FAF0FBC1
-:107B000053424F08BB669A58EFC6BD67E0EF284363
-:107B100097B3C8F7457A3D0172FF27FCFD9EFBDF56
-:107B200053294E68583F944EA3F58919871E403952
-:107B30009BF022E3C751423FB8E01FD2E792977C07
-:107B4000EB118DEFAA17F4FC66216B388F3FCD3611
-:107B5000EA10CCB7C875D629D67BA1476E2A1EB8C5
-:107B60001EE797264717DCE231FA22E8A86F1FF6D6
-:107B7000532AD6F077770EEA91978C783FACBD0008
-:107B8000F80D747912E70BD03BF193E095C8F72D0F
-:107B9000CD57D850BE6F0D4D72CD803689D622623A
-:107BA0005E22F3923F270FA8837122D69350C07EA6
-:107BB0005D2DCA72A6E03DAE42C9DFA3FD2E1E0CAC
-:107BC00094F812E603C871E43D564D3EF5F2A8C99B
-:107BD000EF7ADC60E1F91D7ACC21352A0DC4200B47
-:107BE000DBEA423DABD997EBC3F65C22ED33560B93
-:107BF000BB68BD7D9A95D4C0FE645ACF57E3FA04A2
-:107C0000E35F9DC2681E68E3D0CB63D5E706168CA0
-:107C1000D81F54A91D748FAFEA73330BF6C171FBE3
-:107C200026E1B835BA8C1474D1D321DB29F69B82B6
-:107C30001EB1F1CC77E1FDD944AB976D243C27D13F
-:107C40003DE786509E15D7DBDB7478F602BF39D14D
-:107C5000F053ED31F013F1DB2630DFEF5A415EF3E4
-:107C60006FAACBE0EB057B353D827FFA7933B6A96D
-:107C7000FA803962BE687E5DFD3C19D1CCAE41BA56
-:107C80008F0BA90CCF5F7B9A2F9F88F156C5737A13
-:107C9000B5CFE9188CF2B943F5553BC9BE683560DC
-:107CA000DCDFF6A719CD67CFFE934E8A6FD4D2BB27
-:107CB000FBE99A1DA5D94FFA7A9AFDA4E95DED7EFC
-:107CC000F876A7CF8FFD2B4D209F30FEF52EBE2FCF
-:107CD000DAEBF0ADC3EFF130063C4A62B9A12CFEFD
-:107CE000FE5596FF58F21EAF93E706A013FD4E1601
-:107CF000E8FF414A773CB4FEA73813F9790BCC660C
-:107D0000D443FDF219EFAC92D1FDC97EC3990FD7D0
-:107D1000A77E79FCDE5F50ACDBDB84BED5D2BD8EA6
-:107D2000A2FB117F93CA0296BCEF8E37A28AF7B1ED
-:107D3000B73BBDF7A1FC590BBD348E4C17F3A0FD2A
-:107D400099A93628F86E3269A55BE1F7B059D73B9F
-:107D500026809739C35D80729289FB68ACDF1C3D39
-:107D60008ED6134E9364677A58384ED513D82FD8D1
-:107D70009907CD80779F195ADC2BEDDCC6A3209D97
-:107D8000DA1C7308E9B64F156E8F27727AE9F7038C
-:107D90004878C44F15F9DBCC4CB525B1AEDFE134E2
-:107DA00058C98E8F679E06D44B2F3BB3C5B9A8A781
-:107DB00006F3FFAE7658138776C9F19D13677954A1
-:107DC000A8E2BCB47338EE99409E0F23BE6D133BFE
-:107DD00007DF4AC4E818C0E5C66B94E2E268F46FB6
-:107DE0003249F4B7E13E3B520F3ACCB48F6C53E2C8
-:107DF0003C38CFDA962B1C4FC52AE206A9F2FE5F6B
-:107E0000E8234DBF763AB308FF7816A07D00B37A19
-:107E1000AC748F5DE08F7115C9AFB3373EB81DCF1D
-:107E2000A3747114F57116272FB6D3BD8B2D7B6DFE
-:107E3000B42FED2CE2E7F39DCD16D2BFB1E6691A5F
-:107E40002A83F3C40B04BA7520DDD24CD589A8F778
-:107E5000D2E6F3F9AFA7473B0E14F73B7F3005A3FB
-:107E6000BD57D7D2F4F4BEC56897A567A453AA7DC1
-:107E7000AFB3AB51EF611B1314294EDF10E851EC87
-:107E8000738C09F0FD9CEF8FAF7959D7BDF6BA38E6
-:107E90004EBF4EDFF8848751AE40E0E8F704B4737C
-:107EA0004DB19FD7E22769FD6CF15B8B31E467DD53
-:107EB000A2E9365C075298F7CA793829B798D84EA4
-:107EC0006A972BDD77BDD73FB218DF276726F07B97
-:107ED000B49F6C994AEF9953D93ADB60A0436991FA
-:107EE000C183FE80738BDE741A407E1665B6E4A3F0
-:107EF0009C26987C990963C87545FB8D6525E660CD
-:107F000008E8955C070A81E818B892E8B8D010D55F
-:107F10003F9C9DC0F79D6F89F5243D7D40F19251B6
-:107F200091F97E44574D8E60FE642C19DD150F13B8
-:107F3000F87951429479D06E624DF85E42D347C9C8
-:107F400042CC347DA8C97132CE0FB4E38A403F4998
-:107F5000E77D5035B5EBF70C95E617BE403BD6797B
-:107F6000E924D237306F6B48CE73B9FEB4A13E8B93
-:107F7000F05BB5EF7DBD3FBE637AFB671F3BF05DF5
-:107F8000CB5FD40E07EAAFD3B7FCC98171C0DEBEA8
-:107F900085EF936FD4D9FF5709F90826144D41BADC
-:107FA0002EF0FF3D3FD25E636BB8FF7979507EBF04
-:107FB0008AF7BF23FD80150DFAFB00011EA74CFCBC
-:107FC0003EA79E0FEB041F96EFDA66CE7463FFBEEA
-:107FD00039D8FF69B1BF39DDE8A0F7141A3E8B76B6
-:107FE0008D34A3CDFF97668B78A7D762E27AD93B11
-:107FF00003DFE7F804DDF4781EDC174FF096DEC3EC
-:10800000DFAF2E84BED6805EF435F3384AFA712C89
-:108010007DDB3D0DFDE84B3729B48FC3FAB7C03A7D
-:10802000E15BB391DEF1E8C7B93020FB73F4F11ADC
-:10803000B5FDC032C1FF25F86BBC3951E23836F3CB
-:10804000F774CB74F645E7A19C781CFF9A0461672E
-:10805000E7B34B306EE79E43D909D1E26168E95935
-:1080600071DE8FF7FA313DED67944E4970F3785D1C
-:10807000CD476E46B9AA6CDA4DF111F705DFEB3347
-:108080001EAA14347F6144A12A10F6D87C618FEDBA
-:10809000615C6EC08EDE8CF27FF9E73A3B5A8CF35E
-:1080A000064DEE0F2591DCDC80E31A8EDFD54FA262
-:1080B0008DEBEE04F9FD576FC7A58D471B9F565EEC
-:1080C00021DE9FEBDB69723E45C8DD921DC51BFAC0
-:1080D0000229D6EF7D7F8088234771B63439D2CB11
-:1080E000C932C1B7B03C34DF41E3D2F806F29E2E6C
-:1080F000DE25A5A33FA327B9D0F3BFCDD43A00E72F
-:10810000AB9EFF6D31CE7DB627F0738D256EEF34BB
-:10811000F4AF8079B8C115613F9C566B0FFE14E730
-:10812000D10E2EC791EB22194B2F9A689D5DE570F9
-:10813000A725DA05DFC6E1FB454B00EB69FD9CF2A4
-:10814000D7CC1A48E78DB5B3060EA4771B946AE521
-:10815000A5F77FEC44FBB43D97917FA1CD21E37B54
-:1081600004179B319872FAAF545BBE7E0B75D08EAC
-:10817000168ADF7AEA2BE19FF8CA52186D9C6713C2
-:10818000B81DA8DD3FB951CCA31B9BF97BBB455B58
-:108190008BCDE4075823DFD77849714DCB84A6BE39
-:1081A000869166E4B39E1F4B3D57D03BF06E7C61D9
-:1081B000B7135F97EADFB5897B4C0B847CCC74B92D
-:1081C000859DE6A377C44BEA8C64DF2F7357D3FEFB
-:1081D00066851AFD3DD61897E1BCE3D18F6361A394
-:1081E000427A4F8FFFB21D6B37F465387E3EBEEE8C
-:1081F000E308F5233D23C6C95A2FE7EF32C5BAFD80
-:108200005FB8D1C6A4008000000000001F8B0800EA
-:1082100000000000000BB57C0D7854D5B5E83E7326
-:10822000CEFC24334926FF21413C21111212E29059
-:1082300084000171F24BC4080301826075405184CF
-:1082400090207A5BEFABB79990682DFA7AA358CB60
-:108250006DEDFD062BAD0A4880A08126E9041403CC
-:10826000040D820A96D68014B1053280B5587D8FF0
-:10827000B7D6DAFB64664E92426F5F87D69D7DCE9D
-:108280003EFBACBDFED7DA6B9F65ECD94B720E633B
-:108290000FB7CB8CE53356FBACEC65A98C2D63CACC
-:1082A000E9BE0C46BF6BA9F85F67E59204C6EEC550
-:1082B0003F5568DB57553278AE5CAE9985CFF56F88
-:1082C00090995982EB1EEF53C971D036498E4618EA
-:1082D000C71E379EEEB33066817FD746D33C8C25D0
-:1082E000E0FCFCD723B1A75260FEB38AFFBD08783B
-:1082F000EE2CC0E181799678F873F47EF8FF32C7EE
-:108300008C2F2478DFFDEDF229730E5E5D6D32C097
-:10831000F8A52F496C1D8CBFFF69DD78B12EFD3AA1
-:108320001EDAF0A3B9E91981710F7B9F0BE9C3DA5B
-:108330005456C0D87D023EF6EA7F05EE73F84DAE86
-:1083400008C632ED117167B3A05BC0265D4B63AC0C
-:10835000CE1A99C3A2A03533C2233B64F46E02B88F
-:10836000D644C08201CE355BA3BD1EC4E3EA68C615
-:1083700046C0B8F68D26B70DE6C4DFED8C9DAB6F19
-:108380009E9B9E0EEBAF7F7A6EBAC2D82CBB9DB17E
-:1083900089408FB6E7685CB7E29A6487FE2A4BDFB4
-:1083A0008FEF5683F03899D363995C696286C07CFD
-:1083B000FA7659B3F1CBBEA0751621FC56F86312BC
-:1083C000C02FFF3DF8D5C4685B006EFDBC7FAADFFF
-:1083D0001002F74A85395B6C81F568E326DA0DB443
-:1083E0001EFDF37A7A30E6A5717ABAAC443A04D12C
-:1083F00017E15400AF3D1D56EF5A89F888E0F67436
-:108400008411DC1793D6CD3D93C7D8617C00E0AED4
-:108410001DF132F55F515C6E7B3C5EF48F728DC74F
-:108420006762199B323CDE6046C6607C2ECE0FE34D
-:10843000768539F3988CD75DB1C807D31BFAAA2C7F
-:1084400040AA3AFBA40A05DE33FDB9BEAA30E83FD4
-:10845000629FCCFB9BFA8E5A1C8C35B02915A5F077
-:10846000FC63700FE7BB5E9B6F762D66C05735804F
-:10847000534B0CB4C7C6BC8DF256D35B5921454251
-:10848000CB984FCA057E7046FAAC39D4678530AEBA
-:1084900033CAFD1FB8BE55579B2EC938EE98C2E5AA
-:1084A000A53B8EF0A000EC61F05C53B853B503BE61
-:1084B0009A622C8EC654BAEE098BC1BE535583AE58
-:1084C0006BF4C0E7108E2603734643DB75604C5493
-:1084D0005FF6F078EBAA57AB14A0FFBEFA0C6AF572
-:1084E000F78B4CF674073C5F6460EE16DBE0FBAF85
-:1084F00022BF109DD414A4736DB789E41C7F12F0C1
-:10850000FD2AA1876A81405100CFAA63CC171E893A
-:10851000E3CABF50B06D95D8E910BE6281BE3C3C45
-:10852000DC37DAD6E27C4A309F703C152BA9554ADD
-:10853000D07B4B6D99217D39D19081EB6172B8630D
-:1085400013E0574E31ACDE01EB976F8616F0A1D8E1
-:108550001DF212689B4BA6CB4BA16D34B2852DD872
-:108560001AD8F2603C750879D2DA4B76D76F90EE64
-:1085700017DEEF2DB0929E1A6927F916EB6D941C49
-:108580003ED4439E2EE6D804D79A6417E37CDCC21F
-:10859000908F7F2FE671980D3B55E0D7F7EC0F12C7
-:1085A000FF3AA20C8FA642FFA3E615150AF0AF23EF
-:1085B000C570251578F478F34ADECF325C190DFDCD
-:1085C0004F9A6B787F2A4C99CCD8C9E655159E6C8A
-:1085D0009C97EB31B6C59985EF510C12C9A9B2D75A
-:1085E000E46D843F9B22393F3519812F6370BC4A6B
-:1085F000E39F6A28DE6C05FE578A9DEA6A1BC73531
-:10860000F2C3FFB4D5F0285B0DAB118FD822BECFDB
-:1086100088756B7460ADCEAC39A8175A9C5973231A
-:1086200010AFEECF11AF793DBDD3510FB77EF049FA
-:10863000813B9BD30BE7C9EB612C12D673E1AD9B59
-:1086400036CA52803E97EC45E7515F4BA0A61F8784
-:108650007549AA9DDD0372D7E864AA09D695C85E5C
-:10866000B2A3FD30207D4005B532AE5F3AA35C5F1A
-:10867000E2736CA48FEC4CB5DDF515BE5FD3CFACC7
-:108680003766483DACD757A69CC765067C1093D289
-:10869000767C29EAF3DF9A1DB7A8088F933D0E7008
-:1086A0006C333085C5107B642870DFCAC21DEB5067
-:1086B000DE1D2CC903F2856823E0E01707F6D028F9
-:1086C00064485B073C5FCAA09D8470DD4AEB9291D1
-:1086D0009F2630978C7AAB8079ADD8F677BC95849D
-:1086E000F87A3E8CDDE782D6F22A737A83F4467EEE
-:1086F000B444F89F1563A436DCD83217F934FC1261
-:10870000B3A31FD0FF0B9382F38360DC89D71DFBDB
-:108710000D0CE1FCB5D16B8F82BE3F53515F66817A
-:10872000F9FA059DB5799F37A999D1D0AF8A9108FB
-:108730002FBF2EE2F6D8FF85C9FB722AE2C7B2DA54
-:108740001B2457E3A3F9B8BAB8E2B1D1F07C4B4788
-:1087500038C3F74FEA0C3720FE376FC90D433ED8B8
-:1087600086B881F5C798ED8FE07C315700DE54BAAA
-:10877000EE24BC2AEA8428C06BE14C9BBA0EF0FEC2
-:10878000EBB09699C8F7FEAD06F632BC629BC931D4
-:1087900007FBDB2EAB76D4B3BF4E6D09A7F56C3566
-:1087A000D07AB685FBC7AD01B8D7652815089F629A
-:1087B000650AEA5FC550AC3E02D7A74573FDA8E93C
-:1087C000E39A6895FACF4BF0FE5C1C57447253262F
-:1087D000DB48DEFAFDCC6B86F7C4CFEB95911EE14A
-:1087E00073809590DF159FCC703E17121A5A9BD15B
-:1087F000AB929E75DA9600DDA70B3D3BFD644D25DF
-:108800008BC48EE3D854986F9FCDC8705DB7B13ECE
-:10881000D902FDDBAE32870FF9E7AA427E981DFE32
-:1088200005FB7B65629E5F494C898271455FAA0AA0
-:10883000F257110BF5DBCA36947F81F6ADC4A2BBAB
-:108840008EFE5C24B64AE03ACCB3285AF861A3D82D
-:10885000A86BA4CF60D6046147555C7FF67FE1BA70
-:10886000FA2B4C0E5CFF769BF3E3A9A8077B8D6C7B
-:10887000131B5E8E7E550F1A7D0C08C7D570E68DD2
-:10888000253EB421FDC76D68F684C17AC7A5F3F90A
-:1088900091DF506F8CFD455C2CEAED8868AE4FB4DB
-:1088A00056E32FE4237B14E723FBAD01F9FB5E7451
-:1088B0002A8DD3E409F90BE7D963F42E760D6117FD
-:1088C000812FBF877CB9DDC62A90CF9F1961598857
-:1088D000F2A4BD67B7E07B7DFB54C39A2E23AEFBA9
-:1088E0002FA0FF01EED2E4ABA660FBDD15C7E12DA2
-:1088F00093BF25BFFA62BB44FE7C423BD7D7C17C05
-:10890000316268BE7801F17A3DBED0C7011A5FECD2
-:10891000B81E5F74FF637CF18B68E1DF0ECB17DF5D
-:1089200046E2FA1FEB2849647FC78F69137C30DC6D
-:10893000FD2956AED7F4D7DB053E779B9AEFCC41A5
-:10894000B9BFCBE040B906AAA7CC05FBB23B9C3F20
-:10895000C794D569D8DFAE703DB2BDDD4C7A64BB3B
-:10896000CDED267B9D6461E82730C5DDF77DD47FA2
-:10897000C916755D10DF3E2EF4408BD137E573F4D8
-:108980007F0F70FA4EBE2B5736C1B8110F70B9CE9B
-:108990003F67DA28C33CD53145BE6818DF17CDEDF7
-:1089A00062DD1918057C597BC644FAEDADCE23E58E
-:1089B0004E1BF9374EE4AF497B8E941767E378CEB0
-:1089C00047DDA2D5FA53704D3164768E25017E5D68
-:1089D000C24E4C615C0FB9903F72027DE634523C4E
-:1089E000A6F1413563596827E6F639CA908DAA2A5F
-:1089F00042E95BED9B4971DFFCE3CEB20858D77CBE
-:108A000097EEBEA07FB58EFEE007FF01E564D5E6D8
-:108A1000DE4E1BF2ADCAED698B697516F77B56A762
-:108A2000A1FFAFC911FD004F2DBFCF78795D901D1B
-:108A30005763F83A9F752874DFD367F2DE0297FE1A
-:108A400037E3CFB5087BF3AD90E3DCC7DE588CFC91
-:108A50009BB7DCB90FF1BF284EA6EBFFC97C96345B
-:108A6000A48F4321FFABC5A8967C2E05C631C595C2
-:108A70006183FB7BE2C3F3F0FDD531EE6B4827A6A3
-:108A8000F8BBF1B94985B9792857B6094DB1687F66
-:108A900034B801AE8A4DB6001C1A5CE785FEA98E7B
-:108AA00059720DF180CFA15E693B75D682CF6B7490
-:108AB0006FE9B8C4E91D447FA47780FED27DD8D782
-:108AC000F06011ADD6FFE7E9EF1B89F41896FE18A8
-:108AD000F747FE8FE83F2A6608FA833F958ED73521
-:108AE0007FAAC5047E7576A0AFD1BDDA5E44E31CD3
-:108AF000265819FA4F9D1057A21CBAA3D1B9613B51
-:108B0000EDFC5DFDBF3F3B0A5C4036292686CB93DA
-:108B1000C93F06FD8D093E89FCBE0920F0F7909FF4
-:108B20003592F49D43E0879D95A4B319DC05BF966B
-:108B300082FE9F2F16E56082B9D287FCBEC33A3D04
-:108B400005FDB75CEBB434E4A737331E3B8426E75E
-:108B5000CDE4E53B5F51037E8EA6D7F68969B5F774
-:108B600097C770FADF0E6A16FD3D740D83E1D0F4ED
-:108B7000379205E1907CD5866B56D2C7ED7D80AFEC
-:108B8000DB110EC06B97C45A517F17199C7125E8F1
-:108B90008FC5FB14EED77D3D4A05BEA96C7FF73823
-:108BA000C25B69B1F930DFC21CC6F37D41F912BD69
-:108BB0009FABF9259ADFAFF92D5A7C89FE0DDECFE8
-:108BC000C7EB00BFDD0C00A2FDF159BC0DF0FEE7C4
-:108BD0002FAB994E21AF0AACA352AC6336EB25B84C
-:108BE000D8B7D7AE4D03FACC12F8A8EC86B8300748
-:108BF000EF337617E0E12E85C78B7739203E0CE204
-:108C0000A3D99343FBF89B9E1098E77AE3F5FA7F8C
-:108C1000AAC817FCB371A6D676831D3A0D0C70B0A6
-:108C20009EC73485A3658F82F1803BD380FC582793
-:108C3000EC1A84C943DB2321AF8586BE1C07E0B74D
-:108C40006BCF3764FFF6EEF9E623F4E7A67CA1309C
-:108C5000333C5FF8457E14EA07E60A9DB7EE8FAD18
-:108C600056C6AF13FFD48AB5EFAFC78C18C267A141
-:108C7000F637E79F5F8FF37D7946E1BC2DDE5F6EAF
-:108C800072A7DB6DD8F2787FBFC4FD1DEDFE7E2399
-:108C9000C00DD737C568717FAF42F919F89983E8DD
-:108CA0007C17C6FBB901BADE75AEE20B2567307DD5
-:108CB000F0F7FF23DED7E2FCB744FCC0F69D30A9F5
-:108CC00000D78CD64714F4A36724C9CC19F4DE3B33
-:108CD000542B7306C5FB6FC4E8FC907DAFAD9F05B8
-:108CE00076A4AE477684A1BCB66F3F9483FD5ED96F
-:108CF000611D828FF4F89DD1FE8882FC9F10CBE528
-:108D0000E67AEF2F1C077C722BD29D911F77B14022
-:108D10002239D2D377EF9E9FC7F6650F8FEFE1E838
-:108D2000AFA7C36FCE1747215EAE470F3DDF76C2B8
-:108D30003A3DB03E1FACD303FED6DE7A3BF5DFAE44
-:108D40004FA2BEC6AF751DBF8C457F4DE3D3B25851
-:108D5000CE375376AF8F65B600BD347C5D1474ABEF
-:108D6000668EF9B3E0CF5D922382F48487F52615F1
-:108D700004EC55F5B172F233347B552D671B51FF6E
-:108D80006AF60AD3C2A8CFF4F6697E7A9111D5AA01
-:108D9000DE2EC1028DC8BFD50B43AF57F4342B1163
-:108DA000D433109D2449E043F8D51A3C1F3217C133
-:108DB000ABA7A7069F1E2ECD9FAE1674837596E1B6
-:108DC000D2E7AA45B48E417655ACF746EDA93936BF
-:108DD00034CEBA72AEF4FD9C21F87538BED5DFD71B
-:108DE000F44039BE20975A0FFA1109B10944AFF285
-:108DF000AB26E6047BC14686B1CF82F3EFAF649227
-:108E0000BD7B54D8DFE1F8A6F6AA81B96303FC6301
-:108E10006C7BCE8AFCB35B69B662DEF136DB9CC646
-:108E200028C053E91F8BE7A15F57D76760989A2A3C
-:108E30006BBFB40FE3F6BAE3CC81FAB0B8BDAB04B4
-:108E4000F9ED6DA557A638FA4BC69E0BF20FDBDA8B
-:108E50001BADE83FB5C5C914A7EF8FE6FCA8DD6FD1
-:108E600089E5FCD776E6F22CE710F73F13F74B4F76
-:108E7000E51AD148F6C74750BEA1FC6903ADBF54FF
-:108E8000B25755A2FF718791FC7A885BFEF07DCCCA
-:108E900037B599B763AABEACED878FD881102DFF87
-:108EA000E7B30633E60FE6488E97615CB9EAEFC296
-:108EB0007EF9BC54DA8799F47F65F25FFD774B94B5
-:108EC000F7280776C17EF93DA95ECC3FEC9178DFAB
-:108ED000D3C1F3FECCEE899D05EFF9A03276C23AFC
-:108EE000E229AD7F4BEE3A261838289E7A6C17DFC0
-:108EF0003F7AAC4CA2FDA3327B0AF304F155F9D3BF
-:108F000040CF3CE0C7F6C462E4DFAA0A997983F84F
-:108F10007ABECBCABC41E3F7877178FC92D98BF952
-:108F2000124D5E670AFEAE5E181B327E0EE37EE2D5
-:108F300042D66C44F9AE13F0D415013CF0FC4C1150
-:108F4000A7DEED4E09796F256641606856DC68B290
-:108F50008FB3BFEC23B33A473E796C31BC87657061
-:108F6000F9D0E4AC4CAE69223E48921C181FCF9752
-:108F7000C0AB9451DF85CAD1ECC9A1FD394EBD7E8D
-:108F8000089577BD1ED7E47C7E876CC4387A7E91C5
-:108F9000E46043E803BD3FADD703930C8E7730AE5A
-:108FA0009E7BD549FC35480F9CACF887F4C05B200C
-:108FB0005B93415E7FA4E9839BD84DA80FCAE42D43
-:108FC000EB913FFAC1AE9987E00FCD2E68F176396B
-:108FD000C827F2033BCFF725CAAE829CC606E2ED56
-:108FE00001FD007E8363087FE657B16921FB4903D9
-:108FF000FA22C86F3016FCF37E4319F88BA65C8406
-:109000006F24F3E4919EA2FC1EB43ECAB3255DA278
-:109010003C4A1DC4F114CFB35F125CA8D7A49800DA
-:10902000DFEBFD092D4F3B42E409F4FC3090B79B88
-:1090300067F4229F69FC506EE772513E4FA6FCB95F
-:109040009E3FB4F75D8F2F7C12F085F477F842C80D
-:10905000D38DF2C5218D1FD259FA8DF083C6071A20
-:109060005FE8EDC5415DDE65387B71F23AF6E29D61
-:109070000C23E965BD9DD0ECC28138AE7FC7C7F235
-:109080007D8A9999F36DE8578C407D80FE9EB037BC
-:109090000379A30D9C0FDEE95BAA486837500FA443
-:1090A00006E15DE44D35BEAB7D9A51FEB052E89FBE
-:1090B0008B1D3C9F56572A7B2DF06749FB73EB793C
-:1090C000DF48F9B622A54BB1C0BCB31D9203F335FE
-:1090D0004E917F9B75D5E455293F3FF47E7A95E00C
-:1090E0001B8C7370FC6CA7E4851074901EAABACA1E
-:1090F000EDBE5E1F5589FDF22ADD7EB9294ED0F501
-:109100006676F3BFD2EEC7C72570B919868EDAF33B
-:109110001A1D35FA4DC0B1283FFBBE36A911DC3F00
-:1091200046FACDB8AAD03CA3E242FD962FCFE7FE87
-:1091300027C574627C5DFB25937BFCF0F05FCF2F2D
-:10914000BD59F3C3855FAEBD7726C8780A3A863A23
-:10915000FBA1BDE7BAF6423CAFA7D3E4B8D0784252
-:10916000A387A64707E15BE8D9E1E8753D3DABE998
-:10917000B37FB59ED5E6D7EC80F65EBDFE1D2E3ED4
-:10918000D3F4E9531B0D9417B94DC4C1B7893CEB17
-:109190008342CE970B7DDBFF178B01FDAC6D9DDC11
-:1091A0001F7198ED87D06F08E4F3385D9F8C601EC7
-:1091B000DC2F674AAF85F62F8B81A4B87F99CCF757
-:1091C0002FB7283E17E96987C21A405EFE2AF216B9
-:1091D0004FEEF52C463DFDE4E93106DA47577CBDFC
-:1091E00018174FCA55683F28DAAC52BEF76287D9C4
-:1091F0008ECFF5EFFE5E9711E7F90B7360A8F67658
-:109200008779603F06F54299DC23635EBEDF0FBEBF
-:10921000388C9FB6D05782F1CE6DACB711E3EA42DD
-:10922000A4E310F47B55675FF479FB920EEE27956B
-:1092300044F0BA9FE980467CEFF43613F985D7CB2A
-:10924000DB177DC9C85F1A94AF6FE37A0606119FDA
-:10925000DC68DEBE107D3DE0E39FE8F40E1B267F58
-:10926000BFCDC4F773FC478C0CFD5E762E6EC8BC78
-:10927000CBF5F2F8BB3BC39D6A24EEBB71FF7C7754
-:1092800067B253CD197E7C4E9FBF18F395DBB6CCE9
-:1092900055284E14F9CF41FB223AFCED9058931516
-:1092A000F369ED8E528C3F86DBE728F63B69DE1BC7
-:1092B000C51B63CD9CCEA27EE9762163DBCE863BC7
-:1092C00091BFB79D4D76223CBB057F6AFCBEFBCCAF
-:1092D000E570DACF343955DC07F6475B1C2F13BF36
-:1092E000723E6F1931C68BFBADDB853C6C0BF71FF3
-:1092F000CC8A0BDECFE0FB179DF59EAA33E9B4DFE5
-:109300002D61BE51DB27F680BC505D4E0C237E32B2
-:10931000B21686EF6D74B29F633B7D9A1A85F8BED4
-:109320001CA7ED47AA519467F8F64A816BFC60BC14
-:10933000EFA877513D496BFDC22A05607CB3DE4D35
-:109340006D5BFD726AF7D4AFA6FB6B0F453E8E7660
-:10935000BFCEB9A04A09D21B9FC5F3FC526ED6E915
-:1093600012E473F60D6318EF4C7FA24F463D71FB7C
-:1093700055584748DD887219F14CF9CBB4403F5538
-:109380005A12867C79FB55E8078D97E2A3391D9A1E
-:1093900094A65B0A485A881FC2E29D17E3E0FA0FC1
-:1093A000ED2E7F5C3CF241F5BE0B8CFA97F1FA0E84
-:1093B000E96EF9028CCBF31551DE380FF3C6B934E0
-:1093C000ED62C4DFC42E13ED7B6BF9DB5C31AFF3D0
-:1093D000ABD03C729EC8DBBEC9FA289F9C6F81C08F
-:1093E000CA807071FA39A5F94912E6FBE24D0EAC5C
-:1093F000579898E6CAC37C6B573CA3FC695757C281
-:109400004815F0E054785ED7A9E575D9DFCFEB7643
-:109410007F1AE9217D057E0AEAA7EEA3910E1FEDD2
-:10942000FF59C8FFDB810F627D4338AF1760F3E659
-:10943000511EFD760B5F07D89FF878CAFBF9F61D21
-:1094400086E77E7B99F17DC4DE93B43F5D62C84CB4
-:10945000EC0338F74963A3B07DF1D3C86C6A8F463B
-:109460009E47FC741AAC2ABEF7C37A56857567CE40
-:10947000F76DB49F31FD7D9B82EDE1FA3EAA477BFB
-:10948000BFFE1CB547EAFDD41EADBF4AED3B701DC3
-:10949000F9E7103C8F6DEEE2087A6EC7A20813C29E
-:1094A000DB19C9B668EFC17A335FB8AF1593F9EF2E
-:1094B000C57FBECE7213D83BB37BBC3481B113F1F0
-:1094C0009FCF54A07F68C6A87FFF0BDCFFDD4F2E27
-:1094D000ACB3005CF38EDA5A7BA0FFE94F2EAEB33B
-:1094E000A19E3D140ECA0EF546FF41907496873634
-:1094F0003D9971053B19FAB1A2EFE99F590A245F22
-:1095000050D297C580B5A6FCC43FD302785C607585
-:10951000FF1BF64D9E976696DE847DE6C17A2EBFD0
-:1095200064A4F89E8D94E2B07E6599DD7D2C3EC8E2
-:109530007E3BA53FD2FE51815362D1714457DACFB1
-:1095400062F653B1C1F2B6CC5E760CE971473CDFEE
-:10955000BF9A384D7206D749E8C74D3CA396229D65
-:109560000ACE9537613BBB229AFAAE85939A509EFC
-:109570004B6DC33D5F42CF2F8837127F162B524869
-:109580007D887E5C1E3013FAC7FE03E1941798783D
-:10959000CCDD8875A36549A9B9B2D0798CFAD11B05
-:1095A000711F6D62E587A5B1283F36C981E6A180AC
-:1095B000F535C5C661FD231644E1BA9E2BC1FA9D5F
-:1095C00089AAE440B41539BB5AF1F9224784A308AB
-:1095D000FDF1636A299A9CA3CA84C3F9306E46BA26
-:1095E000ECB0C044477D774CBD00FDA28C28CAE397
-:1095F0001629ABAF1CA67E84A341C5756CFC792DE2
-:10960000CD63267BBE6356C97F20FF14BBA228E72B
-:10961000576A3B3537B82E0CD64D7017D9656F9801
-:1096200084FCFD83523BF4778C9218CACF515FE6DD
-:109630009FE97E77B81A0680EE30D94B71BE1D26A1
-:10964000C9BE96FAAE121CEF196354314F541EF77F
-:1096500045C8FC334AA5296710FEECA80978AD621D
-:10966000E4A590FB3D8BAC64272ADFCF267FA8675B
-:10967000510AD98BCAF7A71563DB63E07E7AE5FB55
-:10968000951574DFC0E3DFCAC5DF718A3EC5BB959F
-:109690008B5751BF4B4AFC777CDF95ECA85CCCA381
-:1096A000CD4CFF7AAE12ECFFADCE24F9CF1579BCCC
-:1096B0002243E6FA6900FFA307F83E4465B6145258
-:1096C00037372BFF54483DA86BDA1721FDB9A59712
-:1096D00042EA43E7557E1DD25F304FAA0A1E5F7AE9
-:1096E000209FEC6BBEA85FD2F24B458285DEA9CFEE
-:1096F000A82A05B93C00ED03A01F8A7A45DE55E192
-:10970000717506FC433D586AD3E577994AFBD91534
-:10971000DD7CDFBA3CCE783AD83E54C84F707F41EA
-:10972000B7FEDC0346B293B9D132E5AB34F82A4632
-:10973000863EAFF95F1502CE1D0677530CE5C79C38
-:10974000BDE87F68F06BEFD7E0AE90EF29A5EDBFE5
-:10975000EBC0AF87170025FF4D0FC78178118780B9
-:10976000BF41FE5937AF4B835FDC50765BF3CF2BA5
-:10977000414F4507EB299B1487F576C3E9296DDE38
-:10978000E1FC306DDE6576173DEFDCFAD9D1423968
-:10979000A89F7A2A3626B8FFDA67EB43EEC79FAA5E
-:1097A0008A0EEE6FFAAC0AEF4F57D4461BF0E34136
-:1097B00026393CC89F3DAA82FBCF25C79C4DD89631
-:1097C0009D746399299B71C6D384EDD4F3DE1E3357
-:1097D000ACEB8E0C59C5B85DF33FF4F09A13781CCE
-:1097E00072F0AA6AC5FDD31D1ED58AFEFB8E2754D2
-:1097F0002BFA1F3B9CAC02E331679A6135FAF3CE3A
-:109800002C5E677855E8E16FE2F9F35A7B5A717F75
-:10981000837A11EBC2D127A8FDDA4F75E007D1AFEB
-:10982000CA1EEC571D54BC367CDFC127BCB6E07D98
-:10983000C21BF5ABFE8C363A1EF96C4E887C9658EE
-:10984000EEAE0A96EF32FB9290FB9FC6A904FF8C06
-:10985000A48743C6DDA13E12D2077F3103FD9146A6
-:1098600013A33A598F81D7C9EAF1F8A8C0A3C366F8
-:1098700047378619E354AA6BD38F739470FCE9AF12
-:10988000A727F0B86823C80CB6F72470F8F475B1B0
-:10989000FA3EC47C0B713E983909F9DC61355C01F4
-:1098A0005797391392EEA47AD93CC3A369D0AF4E2F
-:1098B000C8E2FDA9869D581F7B774236EFDF6AC854
-:1098C00033821FF02B36FE4EAC07AF0D13759D0F84
-:1098D00024D27E9816DF2886532F2EC638738F9198
-:1098E00061FEFE1913D8BDDCC0BEB9D5CCE352ABC6
-:1098F00089D76D3F957AF429D41B6A987B7A02F94F
-:1099000051C52AE2EFBCDD42759D8FED2E4B44FA26
-:10991000DF93C0F35C593BA726A17EF917BC7F56A5
-:10992000C2C4E1DF8F75BE38CFF91D59E47F67DD12
-:109930000CE89502F887F098AE87419840E72598A3
-:109940003309F36C8DD1269AE79E04CE7F37DA0E69
-:10995000AAFB8D32ACDE0EEDFD82FE0FE07B095FCF
-:10996000FE51737063CEEE1F35773CEF237D653972
-:10997000D78F7EACFF3B11B4AFC246FA69FFE5E377
-:109980007BB21CE89F7E12CEF1B7D03BBAB14FC577
-:10999000FA0DEF4D582F9191E8AE453C2C327B6F7C
-:1099A00021FEB1AD8EC0F96FB41E78F07B2180042A
-:1099B000FA544FE1F4D1DE0B38B5A03DF8589C03C2
-:1099C000D1E080F7FF00F9408367000E5D5DB89637
-:1099D00067AEFBA381F20C7512E83DE8EF3CC91CB1
-:1099E0001E98E7A2E6AF8BBC266E45E17BA61C5E07
-:1099F0005A628336BF6D258F737B95903CD7A4E365
-:109A00008A7EBF83ECD654ED795D9E71AA886BA7E0
-:109A1000EAE2DA1713849D4966C9C1798035226E5E
-:109A2000B8DC333A0AFD4CD45132E0D5A4CA6C728A
-:109A30004C40CE5B21EE674171BFC667E38FD9EF23
-:109A400047B8C71F63F7915DD7E61DC82F70BC5C90
-:109A50003ECEF132A12FE3A7D3A06FEC3632AF1A7E
-:109A6000584F2107955DC6FFE078BBC98B75CB05C4
-:109A7000077E99E7834BE624035383F010A68633D1
-:109A800035482F5A336242FAB2866F61CFF3C4FC75
-:109A9000118EE49079F6C49477A37DCFB32D27FB84
-:109AA0001E357974C83CAC4709B1F3B028DABF9CC5
-:109AB0000840FD0CF05A704C09B1E793E23CB862E3
-:109AC00036F9A4A2B3FFCD32CA41E199D0EB0786A3
-:109AD000A3CB70F863393F45FFEE1FC55FB4331465
-:109AE0007FB115A1F88B7785E22F7161289E46B86A
-:109AF00043F192B27C5CC8FD9B56E786F46F7EBC56
-:109B000030647C2A18A4E07EDAD33343C6DFD23C2B
-:109B100037A43F76C3A290F199DEA521F7B35E5D2D
-:109B20007143F41EDFB226649C9EDEB7B6FDAF9093
-:109B300079357A7BE0DFBF82DEE6C4507AA70AFD82
-:109B40001AEDE4F565FD46DBD312E8234C13A15E64
-:109B50008B6E7FF76BCC43788A55AA9FF3CC64B4A5
-:109B60000FFD82EC92500FA5C0148634AA5FA7FAAD
-:109B7000BB1F1B0C21FBE28989DCBE2726F27CCDB2
-:109B8000CF4DFCDC520AF88F64870C2C102F031E7B
-:109B900022315EA678FAC7CF60BCDC14DD97A14203
-:109BA0007C6CC6FE4D017DB9C8AC36F6013E26C8B8
-:109BB0005C1F829E4C4B84F93F919E30723FC26382
-:109BC000443F22C5C23C91B9643F287F1CCDE224AA
-:109BD000ACC78F0AE869F51A106BDF8A2C3A07F5D3
-:109BE0001E4282FEAF2586ECE8DD9A7E5A9E49FA37
-:109BF000E9B22DD40FBBFC401A5D3F71AF99F6FB63
-:109C00004F883A446DFDE784DEFA53BD85DAF3F5FB
-:109C1000F6103DB67CE3FA08F41F4F64707F51BB29
-:109C20005E82789B88AD2CEC9AC58EF9AC7BC038EF
-:109C30004701BE5775F7452E62E43716E3BA6B3716
-:109C40005EB9F74DE8D719FC09DC3E7878BDCCC782
-:109C50008CFCCFEA6F5888FF343791C7E973C5FC95
-:109C60000BA0B1039E1600FEA3B17D775A39F227EF
-:109C70005CA7F369B3BB19D59FCC71A7D23EE35162
-:109C8000E6F8701780F89D4495E09CC75CB45FFFD0
-:109C9000D1BDAB2270DCC07CDA3CC028E86F7C1CF4
-:109CA000ED312660DC7F1BAF6F80F759F0BAEB9E79
-:109CB0009427D10E69EFFB88B92F7C88FBDDCC415E
-:109CC000F36AF3331613A29F762C5FF9692CBC6FED
-:109CD000CD0103E513D6749829EEEA5FF1D7AD2FD5
-:109CE000C2FDFB52FA6E42BBFCC98A6FC6203FDC44
-:109CF000BD01F410ACB130CAFD7062509C72E281BB
-:109D00002B11781FECEBA617D1386E36537DEF2759
-:109D10002B368F09F6471F4D2CAAC5E7D8E41B3B0D
-:109D20006F58F27A6622D563097E7A58F0D39AD7B3
-:109D3000C6921FB52662809F787F13AFEFD0D6F111
-:109D4000A1E0C715AF7F5D107CCE7407F0913A8615
-:109D5000EF6BA920533B7B2EE7E0FD57147713C22E
-:109D6000D779F57424F677BEF737829FCDBB31786B
-:109D700051063D0581FD65EDDCE5C2F6D83CA43B0E
-:109D8000C85933CEBFE837AF5DF81DE2A763F3A62D
-:109D9000EFE3981B3C7FC9847D71083C807DA1F86E
-:109DA000A09F85F3731D428F2AB8839E86E7991C76
-:109DB0002AF1B3931DC27D97C62E03C3BA9548DC22
-:109DC000B409CAB345CA06CD08392D49A09F855E9E
-:109DD0007925F1E49D4DE4E787FA3DF96FAF08F18D
-:109DE000775CF08FFC9D97DC8D9807BAAEDFE3338C
-:109DF0002C3145DDB8FF0381B0532A105B38F06B7E
-:109E00004B14FB22420F77A21C61FD3FCE85F97AED
-:109E10005F383F670CA602F5F80F604DF8B0294592
-:109E2000B4D2C50C0BE8C5BD897F78E669D093969E
-:109E300074BE5EEC37E2DFDD9CDF06FCABB7C7919A
-:109E40009E62DFC2DB100F225FA1A7533EC8078BC3
-:109E50000D9233F1BC6FFFDF22314FBB35467D1FC2
-:109E6000E9E03F20D33E4D98D2678A1E222E7B1315
-:109E7000F59E89FB4D546FDEC6F38116D5C9300EB1
-:109E800008B3DB27049FB36B17FA6ED5FE4F4699D4
-:109E9000800E170C3D91D9307FCDAE1D91E8C6DF05
-:109EA0006B747F8A7CB7F2C40705763ACFB671141B
-:109EB0009D03F08DA6BA83F10AF328B983E1A8DBEC
-:109EC000904BC6B8760325E3D9F8F6BC87501FD56A
-:109ED000F9F83A716E2CFCCB6C63D4BFD8D61883DA
-:109EE000F3D5FDB62319E567733C8F135FBF3A8E38
-:109EF0003FAF3005C77F99182DF8D96BC03863B3D1
-:109F0000884F2E5E35D038EDFDE3DB8A643BF043AD
-:109F1000B6AF792FC543ED6615E91AF60AE37868FE
-:109F20000F2339AFEB9CC1309FDF1FCD1C12DCDF4C
-:109F30001AEEFF039D33EB30AB981F0DB337B31808
-:109F4000987FABD80FCD048EC2F34ADA75ED7D61F0
-:109F5000ED3FC55802F981F2B4614A33BBCD168C8E
-:109F6000E708C2733CF2533CBEC767C0FC88FF16CB
-:109F7000C65E26B80270327AAF066726F9735B4D6B
-:109F8000FEB3787E05E0B223FD33198793B58F5574
-:109F900031BE0FB33B691D6176D5E19106C355977C
-:109FA000C3BC68BF7FBC960DC82BCA6F5D78A06F1D
-:109FB0000119D83A9A09F9B63F5B3A2DB80F8A646D
-:109FC00072E0F9711B629E6D1A49718347C638169B
-:109FD000DA88185CA7CACF3B636A2897E301F7C504
-:109FE000AD167E7F603CF0B70DFB363ECE1165B7F7
-:109FF000CE94484E28AF572BE4FD31C977F67690C2
-:10A00000D3BFF8F6E6A8004BCDBB7B884F571ADAD2
-:10A010005F1C0FF7375ADCF94980CFB74E1AE81C9E
-:10A02000E99F5E0BF35662FCB87B63827308F9D03C
-:10A03000CFFFC3E36B9F4F41FAEF9654CC9BF61BC7
-:10A04000FDA310DEDAF6CF4D548FD0768AEA938ED8
-:10A0500024B99DF89EC96D0DB46F3C8535D3BE7192
-:10A0600096387FDD92C4F5C7E563635E6E08C2FF74
-:10A070008349DC0F637EF7CD2837ED423E3BD12F7D
-:10A08000817697F08F7675DD9DA606E5FD1AD8DE00
-:10A0900014C4F75AF636B5DAF57E2F3FCF98F5910E
-:10A0A000E53E6710FFB993B89FE716EFF327B9179E
-:10A0B00024A1DC769D3645AA785EA56514DA911652
-:10A0C000F09FEC43E065406E757254A7F84D38BEC2
-:10A0D000EE1C3F770A746EC2FAFFCD1FB58D5B028E
-:10A0E000D77701AEB1DED373C24C758FBB8CAE1483
-:10A0F0001CDFF0E15739A8B72A1069F0BFAF3A5614
-:10A10000DE8C7803BE2F0E47F9DACE488F69F299BC
-:10A110008DF209CF6723DFE7633F93F4F056532FA7
-:10A120003FF7B98B9FFB04BE273900BEB7A39F90B2
-:10A130006D0739A0E7C7927C6FED35D0F9540FE871
-:10A14000F15BA85F5C85FDADBDA576926FCCC3E7E2
-:10A15000A29CFAF6D23C2D108320E924E60AF61FD1
-:10A16000DB1323898F35FD783091EBFF960C350A90
-:10A17000EBFFADB21C2217417690F7859DECDD50C8
-:10A18000FCEC0BD3D0DE09BB20FC27769CEBF94717
-:10A1900085AD5AF34EE1EC2DB0CE3587E5817A6E70
-:10A1A000F4577D824FF60AFF15ED849AC7EB67F0EE
-:10A1B000FAC40DBCCEB5C0B9BA04CB38265734EFBB
-:10A1C000C3B6D0D55282678EA72DECDDC7CF1EF364
-:10A1D000F3E3AD7BEFC8C27DEAFE136686FB24ADD8
-:10A1E0007FF3FFE175C0C3773B01FF43D825580ECD
-:10A1F000F11F58EA149634F87EBFA4E98FF9952828
-:10A200006F175BE5401FEC612D3038F67F9D54F5EC
-:10A21000AC07004B1BE17C1D59A230D94D6DFF915D
-:10A22000BF25A02DD8758CFB4DAD266716F24FEBE0
-:10A23000E8D0F3FA5AFB62123FE79C6F6643E625CB
-:10A240000F09BB37C6C39E413EAA6D95ED5EA0FBCC
-:10A250008556D96902FFE6ACD39D806765CE31CFC4
-:10A2600082A968E745DCA87D4F6519FA2760A71E1B
-:10A270007C61501EDF807CF450BBC47E066B5EFEAA
-:10A28000D2D0FB0A35629E87DB36EE4F013AAE78BC
-:10A2900025745C8DA813ABD1F92F8792447C98C6A6
-:10A2A000D2D02F01FE21BD605458B719F8F5C16412
-:10A2B0007707C61B9BC5770C407F921C7608BEDCD7
-:10A2C0002AEA04FC5B25DAD7CB7CD52B1BE0F942CC
-:10A2D000C52BA39D62D0E23EC164A7BB1CF10BEB72
-:10A2E0003E86FB35CB851E5CAEF9655EBE9F01E602
-:10A2F00096FCB229CCDB1889EB7E5572F854FC8EA3
-:10A30000C8A03A5C5A779D5877CD8623FB318C5B89
-:10A31000D5123AAE4EACBB4EB76E6D5FFBCF49BAAD
-:10A3200073C837B86FF16723F7133E10F368F7CDA2
-:10A3300023B83EAC05F0906E355ED9EBE57E9D0D01
-:10A34000BFC373BF80F77E41EF3AE633A5C0B8556F
-:10A350002FF075B26743EB3F1F6C7DC484F1959E6F
-:10A360002F966F31923F0A8833A1BFA8E78B156201
-:10A37000DD2B74EBAE754B3AB8B89F3C18AE960522
-:10A3800048D7555B8C0CEB11F5702D6B59528E7CB8
-:10A3900036985F395D5688F90270AEA6737C370A2D
-:10A3A000E7A811822FC7B17144978AD81BA28BDE10
-:10A3B0008FDDBE7F9C15E5FB72F7688ADF35BAEB4F
-:10A3C0009F2F177EF08C0D8CDA0B6D25D6F118A718
-:10A3D000F4181C924AF156E478C0475E87CC2AA153
-:10A3E000DFDF9EB6DE0378CF3D9C5F85F17CDE61CA
-:10A3F000039D77DBD99D4FFBC07907D263D3281F1C
-:10A40000EDA0EFCDC03C643FFB7B72D7E3B980FE8B
-:10A410009ED27C9C57827168E773851D68E8C9B538
-:10A42000069FEF2E18C1E3F5A7923EFB31FAE13308
-:10A43000B61BE97CC30CA3FF3DAC9FDAD9ADD0BEFF
-:10A4400075CDE1A56BC390AEAF49B46FBDBF774D7D
-:10A45000DC62E4AB76A31DF7A1FBDBFF6D2FDEF71B
-:10A460006C91E87B12751D65595BA19FBB31CF11C3
-:10A470007CDE2B375A25F8D8082BC5C3336E3292B1
-:10A480005D3C9F6CFD25FA372B9C1B498ECFEFD985
-:10A4900069A2FAB9AD1243D3BF3F69DF1B888FF3BE
-:10A4A0006F1E31A1935DD27AC4D4F777ECFD052FEE
-:10A4B00004FE1407379B304E59B551EBF799904E77
-:10A4C0002EE1FFD4BE728AFA2BDA24D2332B5E92AD
-:10A4D000E93CFBBE8EB74CC8C7B55B2496981A748E
-:10A4E0007F8314F21D84A58CF3C152A1675632EF0D
-:10A4F00053C9306E6533AF23604F87D6E5AEDC328B
-:10A5000087BEDBB4AC79687DF3B0E0EB87301EBC6E
-:10A5100015BF83143AEE61EDBB5C3A7E7E5CE3E7E7
-:10A520004C9689FCFC55911A950DD7BF3AB2E2E6DC
-:10A53000A1CEB1F7083BACD9C1CB3E03D911FDB8D0
-:10A540008B6D5708DEBA9ECB26B483E5ED9708EFF6
-:10A5500095ED5D54C7711773D7209EEE6AB7DA5137
-:10A560008E2BFBB85E9AD96EF67A25BCDFD284F4C6
-:10A57000ECEFE4758B9E3D12F92F9ABE7A48E0EF1E
-:10A580002181BF874041A7E4A21FCBE3DE8733369A
-:10A59000EE8F81FBB5E27ACD817D91E8EFCD6497B6
-:10A5A000EE457AC07B18BE87BD148AE73B1987E366
-:10A5B000CE2DBCDE596FAFFA4764CDA6FC23C49DF7
-:10A5C000084FCD96503CD7EAE2ED7523B87DDEA466
-:10A5D000C373A59F59B3110E5576786974AF82EF96
-:10A5E000EDCE9128BFDAADA6450DB5FFA8B5EF09B0
-:10A5F000BF59EBCF16E7AB5BECCDB6E038D894CCC7
-:10A60000EDFF8A29B207E934103FA4EFCB510D8149
-:10A61000F801E286DF8C88E771041674BC3B526651
-:10A62000717181F8E18749EB2B73A15FB785CBF995
-:10A63000C5C9301F7EDF4B61E45FD66D31D339C0B1
-:10A640003AA03BC509EDFC1C83AB5D2A437A83FF2E
-:10A65000FDEE888978AE8619E360DD73DA389FCF26
-:10A6600029BD447C72209DAFF7B2A2260EE58F6B08
-:10A670007E389EC35283CF3F805CE2F8DA765E0F6D
-:10A68000D4BAF7EB51A9A8D73AFE3A6A09B45746AB
-:10A69000F0F56B7E9E1FFCBCD1DCCF3986FEE783D4
-:10A6A0009ADCD8F93EDA83C2CE30A989F8BBD6D875
-:10A6B000F2760CFA4D5BF9BE3DDB6DC46F9CB18642
-:10A6C0000F5E6F8A81755F7C5DA27A347CFE09E043
-:10A6D000B38B4B5B4EA31FFDD5560BF98F0F828FAB
-:10A6E000383D77B03C6A72AB7D77AA81AD257F7229
-:10A6F0002D6BA27695E0E38B6D8D26CA9B79839EA8
-:10A700001F3DD8EF58A5E33B537228BF357C104E50
-:10A71000FE5FFF01D98EFB2780A7FF4E0EC687F094
-:10A720002F5AF786113DFB8FD8C85EFC49F0D979C6
-:10A7300091376E982CD3FA0D53789BD5F9D668A42F
-:10A740001FE21BEBDE3777BE358E9FA7F612DE5772
-:10A75000BE8A49F120385BAC94DBD3FA0D1F2CA2E2
-:10A76000EFF0D4ED19806B8C292E00D770FC2F49A7
-:10A770003C1E3448A1F160DD6ED9155CEF05EBB9E4
-:10A780000FF54F929003A6F813D02F1999AC92FDB4
-:10A790006A68E7F43474F016DEBF80E73B8CF4FEA1
-:10A7A00041F78B3D3578FFAB542BDF4FBEEAA9C490
-:10A7B000FE7747CB544FF9DD0F568C0DD69B0CE13D
-:10A7C000047AD619FD0914371E31107C75472E27DF
-:10A7D000A4DB501F6D2CB567A3DEE1FA6EFF68EBBA
-:10A7E00072E4630FBE373130CF6BC2DE325C6F1262
-:10A7F0007A152FF079C57AD7B2B9223EE67C942D2E
-:10A80000FC3D882B26264F1C1C57DCA83F09F6E090
-:10A81000E86209EB89140FC6B53B8F737DD0D0F188
-:10A82000D0A7C8E7759F98A9BEEABB9D0F8DA53A32
-:10A830005BB7FB56F42BBEEA7CF856CAF3496B09AA
-:10A840002E0FC29784FECB8709580FBAAAE3C30420
-:10A85000B2AFBB26AEF744A09F927B275E07BF81B5
-:10A86000F80FFC17E2BF9D3DF99ABF62C579571DED
-:10A87000505C889F5507F20F55A21F71B8381FD53D
-:10A88000B874389FFC953CF4576C01FF455B4F65ED
-:10A8900032AF77E9EF0AA33C81C44673FE61E92138
-:10A8A000FC53D3FA0ED9F59A3639A46E507BCE9D5F
-:10A8B000ACF07D7E8D7F5A2427F1C776DED6B4EDCD
-:10A8C000A4F5AD34B610BD1BB618F9FDADBCD5EA84
-:10A8D000AA3D2CC683F8388497800E334D5EFA6EFD
-:10A8E000C5C154EEBFEBE9F15932CF631C3CE1BE68
-:10A8F00019F9E560917BAC7D08FBE061C53C3E95B4
-:10A9000004BE5BF97925FDB853C93C8E8F8C0D3D93
-:10A910003F3A605F9239FFCC340DFD3DBD9F69F237
-:10A92000C4D83306E08BA39546FB3AE1B78F08FA0B
-:10A930005E42D55D46F20F8E32FB3B5867384BD3F3
-:10A94000AF93B95DD5F2DDAE0D2ADFD7197CAE919C
-:10A95000F4E47C6D3EFD7969E1D7CCD7F935EB3570
-:10A96000FD37868D41FDD722CEB9ADC90CF306E780
-:10A97000A3F4ED7EB18F81E775B06DC8FC98F23617
-:10A9800007BB4EBC41756627C2D8689E97A3FCF5ED
-:10A99000AA61F2D70D03F2382F84BF347A5C10DF3E
-:10A9A00055D1D3E30D81776D9F2D5CECB39D56DCC3
-:10A9B0006F24535DD67913FF8E9A9FE2AB864CEEDF
-:10A9C0001F5D2893685F1CE01C650ED2EB1746F0F4
-:10A9D000B8EABB0B24CA9B76E1788C9F5A24AAABB9
-:10A9E0005EE5EB35211F8D695DF224C9AB871D63E0
-:10A9F00041DFA9986DE17671806EDABA07EC568C6A
-:10AA000087EBE1386A713CDAC159C2EEE9CF218D9A
-:10AA100065BDE51857563B2507EEDBEBE93D77E1D1
-:10AA20008477E2FF013A9F4B761F21FDD67B7901A7
-:10AA3000E63F0F667E3E0AED65ED307CFB3BC1B71D
-:10AA4000DAF7591C63D546FC3EC98F12DD9F207E84
-:10AA5000FB0DDF468E63F87CDF7FAF91902E8CE894
-:10AA6000319C9C9C12F39D4A16DF258CE3FB24CB82
-:10AA7000B18FF26AF48EA4FC42F68DED4B35EC7E7C
-:10AA80003707F5D6C5AE0339A6203A9E5F03F28E8E
-:10AA9000F6A3635F826A0BE63303F1972469FCA691
-:10AAA00008BB18CA77E791EFB2B1FD30321DF5EE61
-:10AAB000F6A391B7E07CBB783BC09FED328D8378E5
-:10AAC00067CCFC8860F89E24F82EB4F07918EB1B54
-:10AAD00053353EF87EE3707C6B4CE1F584217CAB12
-:10AAE000ADB705BF8783FE7DA799BE8783F9E6E8EA
-:10AAF00020B9484DE1F230497CFF660AF3D0F700F7
-:10AB00002789EFE04C51984F89C17D2E9FCCF76586
-:10AB1000F9798602C1BF93145F17D6394C11FB3205
-:10AB200085AC97C64D677E6A9DCC4EE7148A9983A3
-:10AB3000DAC916DF9D9876C96E69A1FA3F5F821265
-:10AB40007DD622CE430C41B7C0FA15FAEE0DF1A521
-:10AB50008CE76186FE6E4A650A9773FA3807D2F76A
-:10AB600002A3FC147EDF0C5F325561155877749B8D
-:10AB7000C22CE100EFF6B70D24BF9D7DAA17EB4074
-:10AB80001DB1E2B92F18D5BB4E7272F944D382754C
-:10AB900012DA7AF5782884F9303F364981C892F084
-:10ABA000E8A3F7DDCEF8398D22A6D207566EC78FFF
-:10ABB00027935EF7539C54027112EA7583C543F8DC
-:10ABC00028C3E4CA44BEBF1109F314364BEC38EE77
-:10ABD00057A4F1F56AF3170223E0B9BD32B15E4C18
-:10ABE000811E8FE1FB1E9154385C6AE7DF094AA0A1
-:10ABF000EF04DD285EFB13F8772123EFF75FFC7E7F
-:10AC00007E60FFC781DF0D8A0C7C8FD281E74C30DC
-:10AC10007FE753CE07FBCD77A72CAD4E9918A897A9
-:10AC2000636EA6A25FA1AF9743F49D0B3ADFACD54C
-:10AC30007BBCEA9DABE2B9B98571163A4F9B6B19A3
-:10AC40009587762B23D15D9D42751F5B6EA14914BC
-:10AC5000EF44574480CFADCC3919F11CA8D7E3DFBE
-:10AC60004F1A38CF94C0E8FC9FD5CCEB199F01B99F
-:10AC7000C0EF178154A958D7C29E28A1FAC7A7A22E
-:10AC80002D0E3C87604678AD01781B2DA2EE47570C
-:10AC900077D96833D0F7381B59389DE79E15E6FE03
-:10ACA0001EAEFFB188623A2F9DB56D5A12F983B07E
-:10ACB000DE69DA7A0D83EB10B1FE0F9FD3D7FF69FF
-:10ACC000EBC2E3EBF85EBBC097B64EBB76DEC7A91E
-:10ACD000849CF7D1D6FF4C385FA71177E2D3E859AF
-:10ACE00015F5837E7D1A3FFC3FDDFB356D605C0012
-:10ACF00000000000000000001F8B080000000000A2
-:10AD0000000B7B2ACBC0F0A31E818565181826F1A5
-:10AD1000A18AD112CFE066607804C42C3C0C0C856B
-:10AD2000407B23807424101F01E2A340ACC2CBC03F
-:10AD3000100BC471403C07C89F0BC4A5409C05750F
-:10AD4000632B0B03433B107702713710EB3033302A
-:10AD5000E832136F7FBE0803C31309045F51126802
-:10AD6000A734FDFC3FD8F00A7DFADA276DC0C0B0E9
-:10AD7000D502C15703B2B759A0AAD96E81DF8C1D85
-:10AD800068F23BD1F8BBF0E83FAB87CAB7D540E5E6
-:10AD90004B693130782285899D067EB7A0E30AA0F1
-:10ADA000DE4A200600FB72DB43680300000000005F
-:10ADB00000000000000000001F8B080000000000E1
-:10ADC000000BE57D0B7854D5B5F03E731EF3C8CC6F
-:10ADD000641242483084092FA30D3821210D14DB61
-:10ADE0008140448A1AD42A54D4098F24E435011F9F
-:10ADF000176BDB0C04232060B058A2463B4150F097
-:10AE0000061D6890200107B034F4A206AFF5D1F614
-:10AE10007A8352400824E20BBDB6FE7BADBD4FE6FF
-:10AE20009C9319A07FFBFFB7FFFDE3D71EF639FB0C
-:10AE3000B1F67AEDB5D65E7B8F6C3213692821DFCF
-:10AE4000C2DF0F089926114206469EF6D7889BC49A
-:10AE500013529F4DCB4984A48D2041221032B986D4
-:10AE6000967309597B27099A3308D97FC484DF5721
-:10AE7000FA5899B60B99AEA1DF47B2F74F64D27674
-:10AE8000F4FD1317446C179841829B693981D0DE19
-:10AE900086133A840F9F933D0DD6D1B47ED39D2661
-:10AEA000627613F2381D868C27C441BC56429BAE95
-:10AEB0001CC1FA7B6C86E93951808FE19479B4BC6E
-:10AEC0006A4A49DE2A5A5A2D33B81A67973C17A0A6
-:10AED000FDBB4CC3711EB4DE13765AEFD1F74AC9DD
-:10AEE0002ADA6EC31C93509245EB352BB3825991ED
-:10AEF000F9ABCF3944E2ED0266533E3CBDFC195636
-:10AF0000E0F98B89261C674D0DC307ADA798520841
-:10AF100069ED3C60F1D1FED654B61E2DA4DF1F1999
-:10AF200061F2500C92473A0F58AFA4E307724D9E5E
-:10AF300091B4769A14165CF6C878E309057C1CADCA
-:10AF4000E7D96171DBFBD7A7FD4E8279AFA67817F1
-:10AF50003322EDC6029CB4DD1A4AB2101DF797B237
-:10AF6000E7308CFBCB1B12850089D4BB1E80847A12
-:10AF7000734C244CEB11A9D742E838AB26BE6519B7
-:10AF800049EBAF2A32C124C81A8FFADD6325D0DF1E
-:10AF9000D4518747005DAFA7DF611E598FCD8279FD
-:10AFA0003F3A452180FF5F0AB41E457163B1F24309
-:10AFB00080CF51435CF09E3EBDD1F0DA2658100E92
-:10AFC000B27A0321790440C0BF55DEE08A61C05FD8
-:10AFD000B9C403E5340F6D6FEFDFBE4B30235D1A4C
-:10AFE000E5402AE02F16FD46707CAECA5C6C057AFF
-:10AFF00010D29052349A90F580271854F2B9673ADB
-:10B0000022F557080C3FEB64E215E8FCE27295E08C
-:10B01000528A6753966B36CCD7EE53C875B4BC5280
-:10B0200008A48A4097D10AD9EC46BEB08EA4E53573
-:10B0300057257A80FFEA85508A04DF6FA0DF699781
-:10B04000078AC6CE06FE6CF228C8CF947F0E03BED8
-:10B05000D7F812C92A377EEFC4F6F6112E33628272
-:10B06000C243F13280F212E035FBA6FAEB87037D92
-:10B07000C6995C40A155C224F73C909F048B0BC637
-:10B0800097C7DD8CF49307260A4443EF9F03BD293D
-:10B090009ED6BA8B7E0ECFA7723F4C1849EBAFCE2F
-:10B0A0007EB911E8F4F4FD16A4DFD3E33A17815C0E
-:10B0B0003D7121E73D1FCAA5E2D94CFB7926FB442F
-:10B0C00006A1033E36EDC304C0DF90110DF7102733
-:10B0D0007DCEE8AD2563287CA4A1687E06F2897048
-:10B0E0000BC5EB90250A715B182DBF25F09D7843A9
-:10B0F00059AC6CA7F319C2E9DCDAF996A518FA9BEA
-:10B1000043C2A39CF8DE929C18D13343724938990C
-:10B11000F6FFC4824328E74F5F9DEC61729E82FC7C
-:10B1200092CEFB4983FA54BFA45848208E3E8774C0
-:10B13000F4DE0C700DC93C3107E0DCFFFA2101E8B8
-:10B14000F6CC986437E8A3045F27E9A2741F92F550
-:10B15000CE8350CF610FA6146561FDBF603B03FC39
-:10B160002D6EEF26C0DB36A1E630D027906DF23091
-:10B170007A333DB8FADEE420E89121B63FCD14875A
-:10B18000211F10924CE1731194937A216C190EEDEA
-:10B190001E60ED8692A000781E921958243AA1BE36
-:10B1A0004F2872F41FB7153422C807E574E0D7EDB5
-:10B1B0000A292F8A2207AF7279AE17C82CE46722BA
-:10B1C000FD15F8666802E31BB5FC0CC043C7DDFE45
-:10B1D0005AE20FB3283CBF5A322C5BA4F0AC857600
-:10B1E00051E4660D97035B07090814AFFB7FF73B3B
-:10B1F0002BE06DBB899441FD4999214B17A72BD0BA
-:10B20000630161FD37656DB4A0BE103291EF16E4A5
-:10B210002B5EEB1890BF65828FB64F7131BDECF09D
-:10B220002841D0CB8E948060A2F0B8B3886B6306BF
-:10B23000EB2E40F13717FE018C2EB1FAABD7240468
-:10B2400057D1EF73B3A8A001DE28AE4C74DCF984AB
-:10B25000CD73AEA77E11D08F902213E073958BD162
-:10B26000A709C6A153694A63FDACB98F0497011FB2
-:10B27000B958FB11D084D26D44EECBFF22D07ED3DF
-:10B28000783B907B68179712B498683B778D89203C
-:10B290007C52F8B000741F9DEC06789A523CFF3E39
-:10B2A00003E09F257936D2CF23000EDA4F538DC9A4
-:10B2B0008BFA225769063DBDCACBF4BC8AAF0C3E5F
-:10B2C0006E9A272CD0B9930CAA27114FDEB0D50562
-:10B2D000E52C064F462E9B571FFCA395E032DA382B
-:10B2E000CD1226504FC54309EFAF84CFC39E125CE9
-:10B2F0002101DCB90C6EBA2E233C69594A33C8418E
-:10B300005A0AEBCF4DF1A3E21DE0B2A970E5D2FAE3
-:10B31000A0873D4A33B0828DC35792C5E0D97FE400
-:10B32000AD0E81F5877265E3F0DAF8FC09C09BCCBD
-:10B33000F53AEDAF450E0B22AD1F1C47DC1BD9685B
-:10B340006E292FF2FDB11A8A075AB0F371C87A3309
-:10B35000CA037D15F896F2C1BC065ACE8CC8C7C880
-:10B3600015669DBCD8F9BC49039323CA366168971A
-:10B370004158D904653A8F924CBD9C118FA64CE17F
-:10B380007000BF53FDB374BCC2F8E72A66C710A2B1
-:10B39000A9077C3ECEFDEC6AFCAEE0BA9EFE5345AA
-:10B3A00007DF909AE4C922E8938E276F36015FDDAC
-:10B3B0004B4C623CF2B3D0A7BFE8783B1687AD3068
-:10B3C000495B475122E02DBD2671B20278ECF06155
-:10B3D000D9D651E3C5272C4D6309194C34E3648059
-:10B3E0007E7555B450BC921A2504FA7A9C164EFA12
-:10B3F0003DFDB5869940AF87171D4A05F94D36B416
-:10B400001F631A86723AE4355A0BC73FF133A8BF5F
-:10B4100092EB131B403C169FAFC173889DEA59AA5B
-:10B42000A7D3298295B1117DB1EAAA77B27D76CEF4
-:10B430003F89F80CC3D3A85734F5AFE2F503C245F2
-:10B44000EB9DC07A2A3CC6EFE70413EA2907D89996
-:10B4500014BF8F12D76C5C973D265C17E3F8FB9006
-:10B46000E7C064A4678878840CD0B77F356BF9E0B7
-:10B4700027F012F4AD14423951D26D681F52398E43
-:10B480008375AF49AA2983F7A1341B01BD7060EA17
-:10B490002101F099D6E61B0A72A8DAB9933DA114EE
-:10B4A00078FFC861DF95289F31EC46D54E34CEE752
-:10B4B0008A6B97A13E18EAEBED80F5DE5E2979AE46
-:10B4C00003FEF251B8ECA827DDE4BB147E4F6029DF
-:10B4D000E859B78F9607D167257F96B1EF2B6BCBD5
-:10B4E000728E4B917E578EA0F628D58BEB3BD75BA7
-:10B4F0006E003BA3C6E406BE5DE379CBE2B54379BB
-:10B50000F200C0736B916AF78505182FED6D2FDA85
-:10B5100079E35C8A0B94D6687338D5A5592F9AA61F
-:10B52000BE3316E020B75222A6C6A6239D2FF2599D
-:10B53000ACF504603169D691FD993B707D799D5CD5
-:10B54000857451D715751DC11EA97E99C7E5E811EF
-:10B5500077C822A0BEA2B24BE9338FEB113BD79B39
-:10B56000540F333DC7D793358B92713D51F527D892
-:10B57000D6A024E6717DBB26FBB9841B284C76D06F
-:10B58000B3A09752C864587F47829E01FD240504EA
-:10B5900018AF699C8BACC2754CAF4F47D6303DF8A5
-:10B5A000480A417EA2EB5033AC774D69A114E8A75D
-:10B5B000A9E680E0D3AC9FEA7AE7A8E924A007E7F0
-:10B5C000E6B2756E6E161BEF0F80A0710C5ED0ABED
-:10B5D000C675EF171377A0B28CE3F69611FF828938
-:10B5E000D9818FCE780BF1B866FE63F8240D1BB0BD
-:10B5F000BF140BA3C1CACC03F87EB5CF340DECEE5B
-:10B60000F552E78A1114FEF5D3E62A01FA7DB587D3
-:10B61000F95DAB26CE7D0ED635B3496170D594A1C8
-:10B62000BD1AC7E1DA007DA39FA8A05F74DF9D1B50
-:10B63000570CA3FDA4503F467043A5A0C54CBFDBEB
-:10B6400081A6A0BF7D6106BF874C2651E0FF0FC1D8
-:10B65000C6FC505F67C748A4A7C905F0C6797A2D14
-:10B66000E027BAA91FE67603BC6EEB6884D7E45ADC
-:10B67000EA8EB4FF3DF717EE82851FECFBD9EF4C45
-:10B6800003F95A7727F3CB8CF0DF3729D861C271E1
-:10B6900008BA758E18789D031A0CF48F27887039B4
-:10B6A00032195CC70546AF473B275F8F7E52117D3D
-:10B6B0004F3B7AAC739815E4DB68EF3D1DF74136DC
-:10B6C000DA3B8675E652E521067D3FDA1C9A8EFC50
-:10B6D000B6CD847A8A10A6E70462727F3B1C1611ED
-:10B6E0000617B21ED5DFCBE5F0ECF9B4FEF29D767D
-:10B6F00002F852F9218DF7B9AA86F24194797708B8
-:10B70000622CBA333B83D3BD13C61B7869FA5369E5
-:10B71000B682DD160AD60F2E07FFA386F9BBA1F06D
-:10B7200001D43F69536E433F654B73F2ECF9C05748
-:10B73000995E0FA0438507EC93687EE27493E5A2BF
-:10B74000FE7B2C3DDC58B91CFDDEC6CEE8F39F68BD
-:10B7500062FE7688EA494F56ECF1F34CCC8E4E30BF
-:10B7600071BE9B7A2845BB9EA9EBAABACE0E914822
-:10B7700040D4AC87B772FC19D74D22355846313EBC
-:10B7800047FFB1713E8B436C9868C2F88ACAE7B430
-:10B790005E0AE095CE03ED39CA8741B0E71E250D5C
-:10B7A000283701DA7E33E90FF79DC47459F39BC043
-:10B7B000E7D7371EF7AFEFE2FA6A5DF6FD56E88A83
-:10B7C0008E9702FCE177323D59E560766CC14E39C7
-:10B7D000FC030A4755B3807696699F15E13CB7890B
-:10B7E0009669D7618782F5CFBA2C58F69B3BD77EF6
-:10B7F0008F967B778A04EDC84C9B09F8F504E757D0
-:10B80000924BCB600F5B59B1AA79FF5DD05F599B1A
-:10B81000995869FF55BB4B6FFC1E2D9776C804AA3B
-:10B82000546D5EAA0CA6E585412104E59EC974A16C
-:10B8300002BC242A41F0DB7B9C9DC93FA2F33E5D04
-:10B840006B216E0A4A9DA333F9568A8FF2E0F642C5
-:10B850006857DE228046A4F3D87C2815E6B555F05B
-:10B86000807F5FB1254E670F9EA053F901FDBE9802
-:10B87000CE13E4B2943414C23A57B5799DE2D6C4DB
-:10B880001F4ED7BA701CB55CB5958E43DB55BF28EB
-:10B8900078608AD526E2033D746EB775D6B3769884
-:10B8A000DF52659403E6F5B002F54A83C52F5BDDF0
-:10B8B000005FB35248BF9737352B10DFF29BC9DDCD
-:10B8C000E0E7566C19A087AB5144795D9C60D908BC
-:10B8D000FA9CD8BD29378FEE4FE7D3B554C78E8A6F
-:10B8E00094CB411F221F0695999AFA43C504E4D7C9
-:10B8F0008A2DA2DECEE6EB7FE028A37F60AF03E3D4
-:10B900007E2AFD16737F59A5DFE2044E4FA9372F1B
-:10B910001A3C6B811E149E06C0177DAEE6F03927D7
-:10B9200092491077717A894B88C2D7C667834C8A4F
-:10B930008175FF75D9CC49522ABA0F8B20F2E45A8F
-:10B940003E7BD2145AFEBDA968B309F587C70D72B4
-:10B95000A4FAD9CF98985CD6A72A88BF86A979CFB0
-:10B96000B2F804C175AF616AC9736017D0F6DB4CD9
-:10B970002887B4FDE8D8ED5D85F9BAF6AEC232B5D8
-:10B98000FD4E6C6FB978FB86C209FAF10BCBD5F688
-:10B990007B117EFBC5E1775D37513FFE7595D8DEA3
-:10B9A0006F66F4EA4DB0A05DB3DCEAF14ACC8E0AD2
-:10B9B000C37B2971D446A827AAFC403ABD607FDB2F
-:10B9C0005B12C6AE225ABE98FC3AC0E1A0D2A2E5F4
-:10B9D0008BF87C9B8E1F13BC89BA32EDC975E23B94
-:10B9E000BC0C83382D088F3258417D3169B005E198
-:10B9F000BD7F9F15CBF74F60F0DE3FD88E72866B10
-:10BA00000BA5E3FD8AEF1AADDD0A2B138492DE103D
-:10BA10007D1F027E23EFDD26786F13490DEA673321
-:10BA2000417DF47046DEB3010D7E560CA1F4A5E510
-:10BA3000B360FF0C8CE0F5E1212529C59A71EA87F6
-:10BA400028B33666B1F7F3EC305E510FE0C1AFF4C6
-:10BA50008E02BBD2388E7958BE6E1C4B7A198EF38B
-:10BA6000B5611C737A99611CCBAC8DFC3D1FE71B43
-:10BA70009857AC711E1E36413F9FF4721CC72C1A9A
-:10BA8000E6935E6E18C7C6E643DFF371ACE2C5E627
-:10BA9000337CA27E3E432B719C2451D1C5ADCC4357
-:10BAA0002B0DE3D8711C780FE39034E6DF28E6DE37
-:10BAB00012A4FFAB5602F6B462F63D0FFD923F5A58
-:10BAC00009EA13371D7710E89544DC2FF80F53224D
-:10BAD000CEE70B1BA5BF5D4BE7806A17A0BDB38007
-:10BAE000834882F5E89F57731E9DDF32337D293CE2
-:10BAF000DB0A528AC1CF5EEFF040FCF45C5B81321E
-:10BB00002F8A5DB0A0413ED1A5E35FAEF72693CC6E
-:10BB10001AF0B3B81DA0964F50FD45A8DEFA90EA82
-:10BB20002F789E94A99EA6EF8F53FD46142DBC4BF3
-:10BB3000B1DD0989E1F144135B47BE587754C6383B
-:10BB40005F80BC9D49E7711B9FC6828638E62B70DB
-:10BB500038FC9C1EBDBBCDC18D480FEF1560F79022
-:10BB6000C6011457BCDE30C0171597442C5E01F691
-:10BB7000D18F576CFF0D547B47281EB298CE775655
-:10BB8000EB3AF90A5A3E2777DDE5B16BFA99257F42
-:10BB900008F3B6D0FFA09FD93E5AD68C7F4799BEF6
-:10BBA0007C279122654AB7A9E2304E0F3EAE3B2872
-:10BBB00003BD6E4B66F0DC09CFB1F0D985F4BACB8A
-:10BBC000C5DAAAF0F81F944918D7A3AE81CCB81DE6
-:10BBD00088F57CEABA6280EF2ED9E22DA2F4BCEBA4
-:10BBE0000111F16884B76B5F9CD744FDAAAEC64FC4
-:10BBF00065F02F2F05FFDD4BF4DF49808DA7E2555F
-:10BC0000E583DB674D1A705C536FB6EFFA01C735F9
-:10BC1000FC7247D94C5DF9CE9AD9BAFA772F29D65A
-:10BC20007D2F0E2CD47D9FB76291AEBCA0E1015D4B
-:10BC3000FDD2C6A5BAEF0B832B75DF2BB6ACD3951F
-:10BC4000AB424FE8EAFBDB9A75DF4DFBAEBA09E485
-:10BC5000B1EEF72201FBEC73FB89B5605F7D6E9757
-:10BC6000D0AFAA065EA37278AA3605F9FB74AD1BA5
-:10BC70009FE7DA72707FCC6FA3F24CD7FA0D75870D
-:10BC800097AE98087A84D6A73AFCA9BA379706A83F
-:10BC9000EFBE1182D494EFC546858407801F93D8E8
-:10BCA000C7D7BDA2E67BD725BE37D2052BA7FF7726
-:10BCB000B12BFAFB1EA17714D87781F7CDB87F138B
-:10BCC000CB7EA07F579028FE83FAEC86F88646EF5D
-:10BCD000BC2A32BBFA1A71F2AB227D562A4CDE2BFB
-:10BCE00077A44E867841A5121E5513C5CEEE1B2FA4
-:10BCF00044811904FD30795918BC2222BF48BFE1A4
-:10BD00003AB9BFC1E4DB07FAB97BBFC8F607C2077F
-:10BD1000D3619FE61AD1FB2ABC276D03717D7CA7F6
-:10BD2000D63BE0F80842DEAB9D86CF3FD4160D80AF
-:10BD3000F8D19F6A6761F9835A1F3EBB6ACBF0F95D
-:10BD4000616D0D7E3F5EBB04CB276A03F83C55BB9B
-:10BD5000029FA76B1BF07B776D2396CFD506F1A9C9
-:10BD6000CA816A8F92246EFF717B9DAE1C583ECFB4
-:10BD7000E720D27F77A25C7B5240AECFDBBF1805B5
-:10BD800076EEF9F7CC18448F852723BFC5A69F17F9
-:10BD9000D7FB9220A57F4EFFEF561BA38FD544A65D
-:10BDA000817FB672A44220AE6E7BF53B682FD3F73D
-:10BDB00012417D19F468F711FBFA87390FBA349DE7
-:10BDC000D4FA279EFCAFBCB959401F465FDB41B196
-:10BDD00086D1ED590FD04D833F6697EDE4FADC80B4
-:10BDE0004789CB9D119F6707AAF8EC4C87784B9544
-:10BDF000586492E8BBF3AD669CD7F9F638B68FED80
-:10BE00004ABAAC785EC516AB4BAB1FAA42092EBD31
-:10BE1000BE487569F5C5F98E679D20F78B534CAE0A
-:10BE2000E339C01F5ECE1F8CEFD4FEAB42192EBB90
-:10BE3000AE1F7DF97C83308DED2BBAE36F8DE21F51
-:10BE4000A8CFC5298AEB38D50BA7B70C8F8771A966
-:10BE50001FE78271BA6B5D2E366E8A4BCB97954B7E
-:10BE60006C585F852F56BFFF68F860C7EF230B8BB8
-:10BE700035419C2656FD98F4903E53C03F20EDF28C
-:10BE800017B0EED832D57547C2B2DAAF3F2406CC30
-:10BE9000D7C0FB16DD78B49D5BF5A1A15D6CBA4BF4
-:10BEA000E4844A4FAA27AFE3F921949991CE3EDA70
-:10BEB000633CEDAF47B2AF80386F86E4467DE787DD
-:10BEC00081283F5559BA149F1BD1DD8971CF7C550C
-:10BED000EEDDB7FF91B2DCC7FF26633C837C437B7A
-:10BEE000A7DF65FE753E2972829331B7B56206E819
-:10BEF000C98F4DAA3DD09007F33E4B4CB89F7F961B
-:10BF0000BCE5CCD1D86565128F4FAE60EB7380FE77
-:10BF100007F3A3769A6EBD2E6DD4974BC8CDC9207A
-:10BF20000F25EB65D8B1250B61BDD7EC9BCC925C9E
-:10BF300038EF5252530F76CA2A99EDA3CE7511E904
-:10BF40000A0A57D5AEA7F3C09EF54B4CDFABFEF304
-:10BF5000C2440677795250F1D2EF1FB5E6DCF63DC8
-:10BF600002ED83F5A0D7020EE289168F99B7420F32
-:10BF7000DFA5E037C24BC8321D1C6ABF2A1CE2167F
-:10BF8000216A9EC6CF2481C775987CAC91F4F6EBEC
-:10BF9000631C0F6A7983A1DC64A8AFF289CCF92411
-:10BFA00043F23D06FAA7CAD25B88761AA1FC911526
-:10BFB000A9A744EA6DB8583D33D413B15E93342E2B
-:10BFC000763D6BA4BFE668FD55EDDAF67280F2535C
-:10BFD000F94B8F3B21E8FBB1D4900CF1AFCACD0FE8
-:10BFE00039014FA7A48013E8FD71508C1A177CB754
-:10BFF0000F5F5EBB007E04B236C5FB0B8FDC08FA18
-:10C00000FA8BCD32E6C5F8B798C366CAC7D5AD0B73
-:10C010006740FC9E968FB1F2C39FC0BEA1BF4D4F3B
-:10C02000CFF2E71F4F863811C524B3B74918ED8EFC
-:10C03000EA4D7F2E043DEE27BDC887C67630FE85CB
-:10C040004494FB6225BEFF77355FC1CFE5CCDFFAB4
-:10C05000C8279097E037F04F59DF7AD2A5401CA14E
-:10C06000437224A15FFE5DF25DD0032A3E4890D961
-:10C0700013755B378C3946E1E9DEF46F4E41E777A3
-:10C08000333E3C1F9AF7AB57DCB1F5CC39EE0F4588
-:10C09000DA05B19DBB8DD93FA49D3D2BE5B013ECD6
-:10C0A000CDCA66D9433994546E7BF6B927C14F7B0C
-:10C0B000DF8C7E5AC5B6DFBC3381962BB6CB4933B5
-:10C0C000D874EC4272842E7EFABF2563237428FF55
-:10C0D000F56F14F768F6FEA789117A546CDFAF90FC
-:10C0E000D1FDF15710DAAF74D9A3D02574AC10ECA0
-:10C0F00095BAAD5F2AE0777DBC4F208332FAB72F27
-:10C100006BFE0DAE878027A423A7531FDDFAD12B2A
-:10C110007CE32BB958CF057A3216BD5EE07AB96A56
-:10C1200097832440FCF30FE6E00CA0E38BF7386123
-:10C130001E27A51AC6D74F3F940CFB7F657220D9E6
-:10C14000854FF6BEEC99FB90DF4A859A64B68FE97D
-:10C150004DE5F1F25498DF82A61FE1FC4A880FF901
-:10C16000AEEC69B108E2C39F4B64DAF628727183C2
-:10C17000CCF69F4E6E3443921F3909763ED8D76F66
-:10C18000891867256411EE83DDA7C671C9622C7F0B
-:10C19000CEF7A546C826D53FB4E8F875D3C39D4071
-:10C1A0009FD343BC83004E8A8700C79700FBFDE204
-:10C1B000D1A983187D58BE01B6A3FABF00DE43FDA6
-:10C1C0004E19F70935EDB8BE64E3DFCBC7A770DBC6
-:10C1D000603D3B99CCF62B8DF35BC2E747FF3A8974
-:10C1E00086BF34F2CDE47DD34A26DFAABC07674E72
-:10C1F00083EF9FBDCDE407DAC1FA41E10A0FC2EF38
-:10C20000FB6F15501F9849389A5C6F92B95CEBBF71
-:10C21000FBA99C425C80C22D413E43844F68FF894C
-:10C22000887FF44B4AD6D3761AFBCC0FE3613D25C9
-:10C23000F25EB37E94723D304DD6CB3F691A785989
-:10C24000F662A54C02605A56BE6F46BFBB729B5C3D
-:10C2500004F33ED372F09D1F53BE3E1352E554AF1C
-:10C260003F8D725AB663B300FC6994D3336574B5DD
-:10C270008E26A7F47D54392DEBFABFA23F55BCF9A9
-:10C280000D78A37A7068822936FE8C7AD021BBA300
-:10C29000EA41FAF736C9EBCF772ABFA97C462DB41D
-:10C2A000A1A0BFFBF851E5B73E7E54F9CD384F3D14
-:10C2B000DE8CDF2780A146E12ADA2DA35F52D9CE9A
-:10C2C000F66F68BB4357E4227EBCB87C9186435727
-:10C2D0002469CB41433964A8EF35948B0CF57D86F6
-:10C2E000728DAE7E65DB418525198575F5CC4B9E3B
-:10C2F000241F45B1EFD575C6DFFA8912007E48EBE1
-:10C300005540CFC9CBA86906F1B3BD22FA5B3DEE1B
-:10C310005E67227DFF9095F9B13D2E5E4E60E5DEB1
-:10C32000814A3DE839F57DAF95C5397B8A7A9D090B
-:10C330001AFFFE58BBE884FDE0AE20CB47ED0F4F5F
-:10C340001DCA4D1789F59DC505A78AF6F425E0BFDE
-:10C3500035881E700DE72FBDDD09FB6E3DEDC36F07
-:10C360009A45DF2F382C82F94C7A6CCE31001709B0
-:10C3700078A5D43C9E3F41FF4E91C02F2742DE441A
-:10C380003BB3AFE7AF36D8C3F67B15CC2F5BAF8995
-:10C390006B69F8BF9CF753D6A4FF5E4E5623FF95FA
-:10C3A0001BE4C1C7FD81A3AA3C64936CB6BF4D9842
-:10C3B0001FCBF5EE5431EBA65914EF3D1D22E6CD0F
-:10C3C0009E6F17493DCCB345C07D4E1218887255FB
-:10C3D0004D7A51DFA978E906B95162EBA3EE9DFFD2
-:10C3E00091F720F0C7CB7F1CF3147D76BFFCFEA82D
-:10C3F0003D50DEF56EFA1F49FFFA05FBBEC27DC453
-:10C400009E7D668C73F5ECFB6DFA83507EC58C7156
-:10C41000AE9E6566DC4709EC730447C2F721CC1F6A
-:10C42000A8DBFBE5189627B91CE9F48DCCFC91F349
-:10C43000EDFFF501E48F9C6FA7B302BB605F1CCAE0
-:10C440008DFF152BFADF3D7BBFCCF3D9FF71F3A92C
-:10C4500056880FF9CF4166ED007E4D60F160FF9E7A
-:10C46000F1CF427E7355EB7E05E2EC05AFFE650C25
-:10C47000E8C99E1DCCDE3927773D03FB6166E59355
-:10C480006532C5F339109EC1843CAB8C2D086445E0
-:10C49000C30BC3430FC503CC8BE2A50CF47B2C7CF0
-:10C4A000A42BFFACF8F8E42EA6C7BE8B79F611BC1E
-:10C4B000085EF6DE11B408387FF67EDF976340CF62
-:10C4C0009C092D457BE452F3BE5661FB2CFF73E6BD
-:10C4D0002D842F67DE73FE69E9CDF8FF43585F07AF
-:10C4E000F69783FE7CBEEB7E2CBFE8F020BC97293C
-:10C4F000FF3FFD9F46F71D94EECE4BD3FDA97FDA9B
-:10C50000795F8AEE8739DD1D2ED85FEED9FB178C57
-:10C510009BAAF3BFD4BC5FF97F74DEAABD3EDD5495
-:10C52000736426AD7F8484D71751385F4B9BFAF62E
-:10C530004CFAF5B731EC91D30A8B7FFC96B03CC135
-:10C54000408AC0F23CB85F5440D8BA5E90598A76AF
-:10C550004641E623681F10A9E64836C5C7F4F4052E
-:10C560001E960F3616CFA15C977AAD07E38106FFC2
-:10C57000F0A040BC900F5D70F5F51DE0AF4C499305
-:10C58000C3E631F83C06CF43CE69ECBD5DEF17CD75
-:10C5900000BF46E3E75DEFD67F2FE4FD4D238B8F91
-:10C5A000CCA4E34F4B135D416837A94182F9CCA07D
-:10C5B000C2DDA0D90F2A34F47708FC5A4DBCEC6FC9
-:10C5C000C55F9A99F991BFA5E36703FED2648C0712
-:10C5D0005E127F84E57F5D979A8DE75188E441FC88
-:10C5E0004D1F5CC5F1C9FC6689B797ECF59D20B776
-:10C5F00012A17E2FB3CBD05F56FDDE587826DC8F9C
-:10C6000096F8902ADEA53419F35535FD213E547A6B
-:10C61000FCAD7450E9F7F7D2E39C811E699FB92401
-:10C6200090CF026EFF4FF9AC53C4729A47C2FD28F7
-:10C630006EFF4FB2274860FF5F2B1D15412E4B2D1B
-:10C640006DD3214E6FF108C8D757769BD0BFB1E4A8
-:10C650000A88F7CC4609CB474DAE716068DFF8BD5C
-:10C660005D671E20101FF62A68789322169FFFE64A
-:10C67000DB6F27AAE735F03B213750FCCE6F2261F4
-:10C680001B9DE7028904E21321BE2B900F75F15D1B
-:10C690007D19FEBE9F1CE9E752F563E9917FF473B3
-:10C6A00017D55B1F52E6D80D4FDC57A12CA1F18F97
-:10C6B000BFDBCEF0E53F4282C3502F78C522CDBE0E
-:10C6C000D92366A63F76FD69470EC4C526F564C525
-:10C6D000337D3A02FD023FF70BCE13773CE41F9CFB
-:10C6E0006F1F1E8FFB821DA2C317252EB395FBCF94
-:10C6F000FF0AF914F4D9B38934C0398C1ED28BF1F6
-:10C70000D8C0264BD4FDDDFBCD6ABC89D38DFE8914
-:10C71000EA792337E68B04E2B574EB9EF1B134A6D7
-:10C720003F1DE0EF43CD7EC9DF8B5FF0D701BF5BDC
-:10C73000AD5D85D1CE83ADE0F8BBF1C05718C7BC65
-:10C74000BABDD904FC7BF526936EBF3160E67ED777
-:10C75000583216E0BAF180D5910B74E9103D903F44
-:10C76000E86FFF44F145D9B732E213FA87B8F83ED3
-:10C77000338BF3EF9143F300AF7BCE5A303F67B773
-:10C78000D250110DCE2BAD4CCF2D20A17BC664FC19
-:10C79000F3E177528F3D3C19FCCC4D84C7318CFCC2
-:10C7A00047908FCF6F21783E14FC52D00BE75BD8B7
-:10C7B00039608A9235E04F5379FF81362E7365DBFD
-:10C7C000F67F053BA0BA5D7041EA6CB5D4A540BCCC
-:10C7D000D5DF9620C2BA9BED56F32A5DA36FD5C86C
-:10C7E000C53E33CB373E3861CF1D30EEA7DD0A01A1
-:10C7F0007BC4FB5AAF13D6ED4FDB73E2A3E5CDABA1
-:10C80000CF5FD792E95324E88720DE8DFC90D56274
-:10C81000D395BF27FA06837CDD68EEBAD713857EF1
-:10C820003E0BE3B3CBD66FC1FFCFF4DBDBAA7EF3C5
-:10C8300089451A39CAB4F4D36F83A2E9B7C5827B9C
-:10C8400010E07DF1DEE18380AE8B0FCB03A3E9B76F
-:10C850006DB56C3FEF259E0FDBD34AF5DB351AFD36
-:10C86000D66AC1BC3863BB448B89AF8B97D06FC18C
-:10C87000FF1EF9DB06FA2DCA7C475A98DE50F5DB1D
-:10C8800098F663A8DFC6B49A7479A369964BE93722
-:10C8900061E0AD600F77C89EB828FCB38DDBDF2F59
-:10C8A000F13C3C1807F4DC1D16B6BF79B97A2ECBE3
-:10C8B000CAE87D493DF7DF846755CF2DDEA99E7319
-:10C8C00034F221D3738B77533D27003F323DB77845
-:10C8D0002FBBC7C1A8DF32FBE93782F5ABC3ACBDC4
-:10C8E000BF2D63C31CDADF58AFECB1D0FA6323FA73
-:10C8F0006E9C56DFDD6161F72EF4D3771D97A7EFAD
-:10C9000076727D47F5D830D0AF46FEF0B4EBF38EAB
-:10C91000F78C3FD9F26B9097D745DC373CCACFA54F
-:10C92000BD31FE642EF0578B85E9DF3ACE7FE76A92
-:10C9300003D87FC16B6C7E5576968F5CDDCAECC3E5
-:10C94000EA1621E8A6FF2C9CF09502F02FDC2B9034
-:10C9500041B43CD3CCEA93E7D57D2F32235BC30FA0
-:10C96000F3F32B306E3F5F221688CB57D80B3F86F0
-:10C97000787C453E8BE357F0F70B0F77D5433C7B34
-:10C98000E11302EE7B129E0FA0E63796B62FC57814
-:10C99000AD312F40D5E70B83FAF715867CC6663E8E
-:10C9A000CF996217E285BC2946CD4B6836E2A38356
-:10C9B000E3639388EB661F3E287EDC19FDF1412975
-:10C9C0003A233B3932FF85AFD379E546E6A5E2C38A
-:10C9D000383F35EE5CC1DBC59AAF8ABF7EF355F1B7
-:10C9E0006998F7B3A037402164931CC88BA17C8061
-:10C9F0007A23F03B11CFEF174D1A3948AB87B77246
-:10CA00007D9ED330A9209500BE480DF04D49E3A28C
-:10CA100043A974DEE3DE738F85E5F17B13CC3ED84A
-:10CA20001FDD6AED45BDA6F2D5D79CAFDEE178DC0F
-:10CA300033B806CFA9FADB0417D815FEB015F1E715
-:10CA4000A7F883F32B7E7E7ED14FF90BE4E9E01348
-:10CA50005F307CED15DC101F2F54D71FC03FAD9FFA
-:10CA6000D3CEF0EF0F0A88FF5CD28BFB23D58D82EB
-:10CA7000274CEB57B72DC2BC0755DFD23FBB961EE4
-:10CA80001A7E94A2F12356D2AC7F15BCDE8DE686C9
-:10CA900077803F6F7C5E26CD1AFECCA4FF7D1B8580
-:10CAA0004E2A3E2FC59717389EB6011EED80AF5E09
-:10CAB000663F85BFC27334EA77BF14D0E1B1E0C9E5
-:10CAC0000B17C5D338154FC0A7A0A7DA8B452897F9
-:10CAD000B409644046FF79C2FEA4566E17EE3DC607
-:10CAE000FA7F5AC07B4B8C7CABCEBB1FDFC6E057B6
-:10CAF0003897067ED1E5F2EDD706BE7DC3DA7B24FA
-:10CB000007F876AFC0E207ED09BAFDC5C156B6FE1B
-:10CB10006FB552FE867DADC3B267A3BBBF7CC7F1C4
-:10CB2000F50BEC7EEDB9A4AB602290F7B8C5827925
-:10CB30006408C73066576AF5EA362B19786B6EECD5
-:10CB4000FE5379FFB1EC1AB53C1AC6837CAF363A76
-:10CB50005E66643CA35E57FDFC4BCD6BD4DF39AF02
-:10CB6000BE3C4CD289FB4E1992EF51B3260FEE36E4
-:10CB70009E67442140FB4A532FCB72917A24C5858E
-:10CB8000E79FEE71A97CC6F2DD8B781EFB5471E243
-:10CB9000BBB07E7EEA65FB7CB926F2FB89A09F27AD
-:10CBA000CB788EEFD32332C66B3F9DC2F2386F7ABB
-:10CBB000FDA004719A9B4039517CDC344E407F05C6
-:10CBC0008E61C1BED92E6ADF7847E17C72E01C57C6
-:10CBD000F6A68602387F3C764BB00E9E9E82DEA47F
-:10CBE00037008F93440278ECF40E2880FB93EEF923
-:10CBF00033C1FB43E83A8BEDC7769081506F827763
-:10CC000020BA03E35BD717407C74E641BB1DEE6797
-:10CC1000C96C32519F2182BF09245807FBEDE38F75
-:10CC20007B6F0178CBA8BD0071E7B2F6E63A279496
-:10CC30009B048F9BF6EF0FF80A9D741EDB1A3F29A9
-:10CC4000FC0EC823AD07DDF89B583DFF26B87808D9
-:10CC5000DEAFC33C9B924D021EFCDA16148885F5AC
-:10CC60001BB4D07EB735D1F6B9B04ED0F6D0EFA612
-:10CC70004FDEBE05E4FD88C8DAB7B07DEA12DACE31
-:10CC80000D7CBB6911F6B7B0492029B4BFB216B606
-:10CC90000E941D913DF0BD75FF13B88ECDA0E3A598
-:10CCA0006680DE0F4F8132C9115C18EFAC1C8574B1
-:10CCB000EBE1724E268E64FA43E065EE37A876D338
-:10CCC0003B5696EF5BE259AA0CA0FDBC913F3003A6
-:10CCD000D202FC6D9FE0FEF3718A671FEDF228CF50
-:10CCE000DB3898FF91D2A559873EB5B2FBADE6B7C8
-:10CCF0004DC27C8605A408F3196E1CCFECB537AF86
-:10CD0000B506E18A8337E5DE34787FF05A33DABF3F
-:10CD1000E7B6C9C847E78674617CFA64938CE786F6
-:10CD2000EB9AD8FD5C275BD83A2E3ECDF6F54B1D2D
-:10CD30000A960F36DD5208EBDBC94DECBC63C1D35C
-:10CD400053152897360B1E767F11D38FAAFF56E214
-:10CD500062F908AAFEABE2F3EE97B768D07755EA1E
-:10CD60007A63D07755B0AFEC84A7FEBD9FD8991EEB
-:10CD700004BB1FE81EFE0AF9B7FA884CC0EE173E46
-:10CD8000EA2EC47CACBD02C6F3C7B70B5ED8D72F62
-:10CD90007BCF1C447B35587CF74F408FBF6F26827A
-:10CDA0001BF2DA29DEA97EC837F7FEE917F4FDC7C2
-:10CDB000472D900943F9A418F1ACE67FE66E667939
-:10CDC0002CB947D727C3794B326500EADBD24691AD
-:10CDD000F8347AE363C17BCB8F995EC6FB2954FAA2
-:10CDE000E52A0D25B08E0DB731BDE4DE2C438E084B
-:10CDF00039CCE324D49EC6F3B70B77AF4B5668BD4E
-:10CE00007A9EFFB170EFBA6491BEAF83F58BD65FA7
-:10CE1000A8B0FE17EE135CCD9AFED5F66A7F6A3F86
-:10CE2000CA6E7D3FC3F7F2F265F6A3C2A18E1FCB97
-:10CE30001ECFFFF70BEBE1BE98FC37454C3ACEFF17
-:10CE400068C670ED7E87FA54E3AF796F9B8857838D
-:10CE5000B7FC3FD98857C317ADE3A87C53BADDD0E0
-:10CE600026040194D671C794AA5C2CBB409EAB7972
-:10CE70009CB67A0ADBB76ACD3EBA1CE47B46AE802C
-:10CE80007C40023E654012DA416ED85F28CD65EDE8
-:10CE90004B697B90BBD627981C527DE0067D51DD07
-:10CEA000B4AE10EB6F12DCD07F6B7331AEF765F967
-:10CEB00022C1EF9B8EA1FD51D6762C09E495CAE7DD
-:10CEC0007A587FAB279AF13E2F55EE54397E53E6C0
-:10CED000F735595CA321AFFF41002A8AFC8A470835
-:10CEE000F3535B6494337F3E93CB37B78928CF07E6
-:10CEF000AFBD1DE5F0DC6621861C1728702EF96495
-:10CF0000907DEF93E3AD029763A61F4EDA995C170D
-:10CF1000C07790E39D02F707993D689463552E2FE3
-:10CF200025BF155B0CF21C436E3BA5AE5B61DC7B41
-:10CF3000AEB522DC05DFDFFDCE3DA87F64CCFB284B
-:10CF4000F8FE03C9A0EF4A2496AFA4E2B14A62F901
-:10CF50006CFDE058BF5449BD2C78F4703C657544B5
-:10CF6000F487087CCEEEE10A6C9291CF8D72F8F7CF
-:10CF7000CACF3F4A9E0F73FE51E111F7B2F6903FC0
-:10CF800016A678FA6DCBB398A77AF6856337029E1A
-:10CF90002BF650BEA5F33DD7E2E0F7BD04719D2905
-:10CFA0006F15310F9C48E1BC5B1C5AB96479481578
-:10CFB0002F39903FCA77B07CD2F2973F1A837922FB
-:10CFC000CB7A31BF2AF002B737035D6380AFCB2540
-:10CFD000960F6594F35B6DCCFEECDE1D370BE621FE
-:10CFE0006C61E7F4CB43B7CBC0876ABD1FDA64B589
-:10CFF0001EEE5F0628DFC2FE3AC0A73D77AEE641CF
-:10D00000756F65725FDE26A3BF54BEA519E3D8FE17
-:10D010002D9F609E7BC14BDB307EE06F13F5798FD7
-:10D020005B44DCC7A24FDCAF32E61F56B756E17E49
-:10D030005B7588E7F719F2DF2A5EDAFB7280A2A639
-:10D04000E2D7CF3B410F9CEEDCEC047CD2FE306F8C
-:10D05000F0FB9F49BABCA8D8F9BD5E7D3E6168650A
-:10D06000D47CC2D3F00FCAE00FD838BFAA79985B3E
-:10D0700006F03CED705E5194F87DDFB99D6D9F3FE9
-:10D080000379EEDD3BCE3C037057FEF5D367209F5E
-:10D0900089ECB3E2BAE47FE1F79827ACB6FB858D63
-:10D0A000FBF95B9FC7FCEA73EF9BD1CF39B7F764FD
-:10D0B0003AE4AF9DDBFE5532C4E3EEDD3B15E3956C
-:10D0C000F7EE2C1844A2E877F5097C19BC8CFC6EAD
-:10D0D000231D0EB61EC4BCABB3EF99519FF5E58579
-:10D0E00086AA589EAD9BE783B644CFA357F318ABEF
-:10D0F0005B6FB9E95AD0CFADCC9EEBCB6BBC541E65
-:10D10000E8DB949ED75C06DD5A789EAF816E67E1BE
-:10D110001F943E2103DD3E6F5DF0AB27E15BEB80AA
-:10D120009879A0E1CBC0979AA7FF739B778F0DCE1C
-:10D13000FDED880BA4307A05670860EF7D9E0EE751
-:10D140001A4EC9BD98EFD1BBD7EC827CC6F2BDEFB9
-:10D15000A27C9CDB7914E3AA84E7C99F237D7F2C02
-:10D16000AF59E0F3DBE460F9A31CEF905FEA76E2ED
-:10D170007B9E47CAF856CD2F8D9557DA6B1BC6E2BA
-:10D18000D0FCDC4015F593F8BD597DF9A6423ED0A0
-:10D19000E9982E4F579DB7B13F17D79B91FCE8E810
-:10D1A00079BB6ABE60844E6C1D51F39FCF35F3BCD2
-:10D1B00069FA3E6D2CE4C1B1F5DA1F14DE2551E4A5
-:10D1C00051CD8F3E6333E445072F2F2FFA52F0FEE7
-:10D1D000EFE2E3031B8B57AB78E9FE26BA3E56E23B
-:10D1E00098DD49FD53390EF705987F7A37F74F558B
-:10D1F0007CA9F0D68798DDD0BD85F9074679AE8E3B
-:10D20000715F52121FA7BA6DFF18D03BDD0776730E
-:10D210007E63FC5CDD728CE5DD52FD1CD4EA677E2A
-:10D22000BF84B1BF74DE9FBF3D7A7FFE964FA2F6EA
-:10D23000775AF2DE0EF09FEE6476D2E990382DDA5E
-:10D24000FD36963859973F50EF60F765884E1BDAE8
-:10D2500047F73AF2DF8B4F82A782793D754B791EF3
-:10D26000D0CF3C78AF689D633A01781E02FC68E23B
-:10D270000CB2CB47C04E93538A72457704DE3E7A98
-:10D28000249948504B7F299C06FAFC83EC9332F496
-:10D29000F79F86F8C87F4AA47E1085EB3F0382671C
-:10D2A000A93BB65DAD967D3F1575F18C6A73EF07AE
-:10D2B000609F9357ADB81F2EEEB306303EF60CBB01
-:10D2C00057E3E0CE2F9FC37B797E6526DC2E14408A
-:10D2D0001F94F238C5C99D5F3EF35F604742633AD1
-:10D2E0007EE933B43ED8CF2D7168EFF7EC881F0389
-:10D2F0007180D2571FBC11F44529E83EB0335F1A44
-:10D3000014ACA3FD9D18C8CA27B60DC17301153B07
-:10D310001C984F7870E7AE6AD0F7E75E8A23A0EFDB
-:10D32000CFCA5D7F85B27F4F3C6976A3DDE7D6AE7D
-:10D33000AB0B89E4D6DA731550D6E5B710CC6FC1C4
-:10D34000F81BE5E78AB6783CFFA1A9C7E539309814
-:10D35000DF133518E48EDA8D6E7DDE33FB3E3F8EB3
-:10D36000E92FBFB9F77E761F02ABEF577A4B58B95A
-:10D37000613093DB4EACBF48E557FEBD7FBFACBE0E
-:10D380003F8EC50322FDB0F6D56676BF8691BE3FBF
-:10D390008D13F879DCBF5C19EDFE8928F0B37BB9F9
-:10D3A000041280FB57C9762BE669552AE15190AFEC
-:10D3B000FEB2C2F63F2A9DE15190AFBE87EBBF4A55
-:10D3C0001B2DD3F783391C501FCAC4D2F522DEEBC4
-:10D3D000B4CB8AF7E155BDEAF0A29FF0F297279E01
-:10D3E000CA857CB538CC93AE7AF55F90FE55E6F0F1
-:10D3F0005DC0FFBDDBCD783F69F7F6C3E9603774E8
-:10D40000CBE1F4C48BECEB5485CCBA7D6A751EA7D6
-:10D410006B974C8073BCEA39C3F218FAE2F5389680
-:10D42000D7D11CE7FD15D373FAFB654ED7CED2DDFD
-:10D430009B586E89AEC75A402F68E27862E45C61FF
-:10D440000BF47B9674D50FA624A9127A717FBC7C4D
-:10D450004B461AF8BB07AC57E2BED501D98DFE206A
-:10D460003CB5FAF854AD2747C2F3F499391285A3B5
-:10D47000A7F99392C104F203ADB3A2E9A7BD7171FC
-:10D48000C84FE51673D4F39BBFE3FCB60DE46D1CE7
-:10D490001BCF931519F7801C54008E897637CEA7C1
-:10D4A0009CFA01EC9EA8D939DA73DB0BA506AC47D0
-:10D4B000E50BF1B190AC5772EDFDF5CAC225B93953
-:10D4C000520E2AACAFFBF84D8CD0890492D04E920C
-:10D4D000380DC9FA545DBEBF241759005F0A29727E
-:10D4E000492290BA01E5D44642F8B4533384AD439F
-:10D4F0003504E2E3A7F8FEAC59723F8AF7CD748891
-:10D50000A8CF2F85B777E39C08B759AA211EB43757
-:10D5100066B8C01E13023EF22DE587BADA6939EC0F
-:10D520005C38F142BE1BA6BE51F89CAE435F817DC4
-:10D5300040F98CDD63F57D12ACA3E3C131638CFF50
-:10D540004D66F7D91BC7FB86D38104F6EBEE3B870C
-:10D55000BF5EF5FE3CF0D7E3FF9A0FFB317617096B
-:10D5600083BD146727E1B831704F9E745A2BBF4EAC
-:10D57000C2CAC3283B835E734DD47F37F235F1486E
-:10D580009FF5E94511DB7F6668FFD9C5DAABF8F096
-:10D590005B367A8EE744F062E373084CF65CE8028F
-:10D5A0007C8C717AEA808E4AEF070F023EC6D899CA
-:10D5B0003F98D448B4FE5A8E9DE9ABE5FCFE69FA6B
-:10D5C0005764D7F4475C168C8FAEE478EFABAFC6E8
-:10D5D0004DFAD5B74A80D77EF5ADB1EADBA2D77751
-:10D5E000C482272E3A3C0931FA0F44AF5FFDEABBF3
-:10D5F0006F84DDF092E90D08CEF373CB3976F0AF8E
-:10D60000E23F482E665CC1F6030C74B301FF517E05
-:10D61000B08DD0BC87FFCBD2D06F5814FA9330F2C4
-:10D620005D31878796EDA914BE1F7370A76C62FBEE
-:10D630009573EE6571A21F5B587EE9317E1FD09C09
-:10D6400046E657CF59C2F61149193BE7E3A2FFC19D
-:10D650007877422794DE773608C17006DC5B63B0CA
-:10D660005FFBEEC759A840FD6243DC45E527F53C6A
-:10D67000D23C6E5F6770FE5C407A1D20F7C673EF88
-:10D68000AF71BDA6EAFDC03A9209E7F64593CD0316
-:10D69000FBA3223F674A9CEC3E3FE21DC2EE97533C
-:10D6A000F3B832DDF1B0BE91107FCFF759165FEFBE
-:10D6B0001EA43DA7255DB0E1FD2075B22705F4A0AD
-:10D6C0007C81DA75D455532E0C236ECD39326ACF56
-:10D6D000A170CB2E765FA2E42A22A56007F2FB019F
-:10D6E00048D2F43EBBEB4D8A87C5EBDC786E758182
-:10D6F0009DD999BF7014DD631F07F665BE87DD7382
-:10D70000ABA76360279B5F1DCC2FA33FDC758AC747
-:10D710008376E7746A31601CC783BFEF209ADDEF20
-:10D72000BA411EFF4D66BF57D00F0F8C7EE7931294
-:10D73000F15EF6F9CE551F009FAEE6F711AEA8CD0B
-:10D74000C4E7AADA14B43BEB6B3DF854F162F13450
-:10D75000E0BD6F9611AC3F8BCBC7EC0A6ACB403E65
-:10D7600085E4AA0943D9925643C0DEB5F6E1A70184
-:10D77000F1A3F4957D5836BBD8EF46C88D3310CF52
-:10D78000B43D29A5DF173B7C4F829C58DD57EBEE5B
-:10D790009133A78C35DC3768C09BCA1FDB18FED6D7
-:10D7A000088C3F8CF85B2377BA615F79CDF57DF704
-:10D7B000CE20FEA879CFF0F73BB6CF16137FAE444C
-:10D7C000B45FE7E7D5DF55475F3DC2F7171FAECD22
-:10D7D000477CADE4F7483E54EBC5A708F8A3F33304
-:10D7E000670508DC8FCE7E1B823EED455EB87F1656
-:10D7F0007817F027DA193ECD2935B8BF66B1337CEA
-:10D8000089F600E245B6337C8976C66F0A2F4B80D5
-:10D81000BF1C6C8FEF29FE0E007F59D226E8F0A5C1
-:10D82000244DBE3CFC3D41F147E148E2F265C44372
-:10D8300092C2EEA754E52A961DF7389D3FACDB1B3C
-:10D840006A093E07C6F0178739D8BA9964AAD92F52
-:10D85000033E12095F4F02242D8FB0D443F84B09C9
-:10D860001037940506076918A2BB57527449867B86
-:10D87000D9DC1B800FD61F964D902F2F2E99AE3BD3
-:10D880000F2ACEF226B8119F3EBCA7F9915A37D283
-:10D890006F1DD011EE01E5FED7439C9E0FF37B2850
-:10D8A0005772F958C3E5E5512E2775FCDEE4D5D350
-:10D8B000589E5552B689DF571626DA3CA6044F8883
-:10D8C00028142EB4A9DDF8C47B16C97BE6E048DA3B
-:10D8D0002E2E8B78814F12DE7B20C8EE6B2C4A05F2
-:10D8E0003B2841BD7F71A23B61361E840D4BCCEFBE
-:10D8F000A0AA10FD984E53B47BAAEA3C072C100F47
-:10D900008D054F9CC79BF1101D2FAED181F6FB00FA
-:10D910005FD1EC05B46C6F8CC3F85F1CFF7D163BC8
-:10D9200085BB5443EF58F7506F745C1FEFA0F4743D
-:10D93000018CF4F958E370FC5D96C7E522FC1D9755
-:10D94000C7F97AAADE73AEB6FB9AEB4767EED53A13
-:10D95000BF75BDECC576AE897AF95FCFF56DE2147F
-:10D960003D9FABFAF6789FBEF50D0378922F4C41A0
-:10D970003D96747374BD5B272B786F79DD6826E75D
-:10D980008162859D6BE9AF07304E7DDE376A23E803
-:10D990005195AF9611A67702C4E6C17588DF6FA3D3
-:10D9A000DAC12BE01E40AE5FE1298E60BF3F903CA4
-:10D9B00087DDE7BB9ADF63B596F215C17B4F3DF873
-:10D9C0009CEE60FB13CB2C63F13EB53ABB09F584AA
-:10D9D000F4BE39082687B47FBC0BE20592ECE9F46B
-:10D9E00042BCCF2185E0DEDC3A7B2EDEFB2E24E438
-:10D9F000BA80FE5F38E60FBD583E1D9D28DE97E9D0
-:10DA00004A2A221F66E16E009E5F915D3713881BD4
-:10DA10006E48AAB102DEC63B585CBFB1380FF14870
-:10DA2000F17B936360A49F41B3A6F7DD8305DD6EB0
-:10DA300088710EE60E07B397485A808CD0C879A338
-:10DA4000FA3B27EE00C9D4C8FBB2918504F687FAE9
-:10DA5000CB790C3DB699E9B1E542743DA6DA99AAB5
-:10DA60001E930DFA417DD60F9DA63BA7A524798074
-:10DA700077E1193079C0BE7BB9FE8E04C4430DE056
-:10DA800081A44CEFF35F7F300CECC7BCA8FC66D4DC
-:10DA90005FF3FBD6736F32D0E994EC1E341BF8E9C8
-:10DAA00070F4F57CD263573D0A7C30FF77A2A0DD8D
-:10DAB0004F29BDB002D7D3920BF9F82C6B9C867C12
-:10DAC0004F200AAEF1C34E36DDE704B84E36F23CC5
-:10DAD00080263908F919271BEFC3FB4A20CF5BD4F6
-:10DAE000ECEF935C37DA97EA3D632783F738B5FBB1
-:10DAF000BB25BFB07AC16E8DC55F254DD1FD7A586B
-:10DB000043217E4A01CC047B98DA37BD61B07F3671
-:10DB10009A3D011229071EB346CD4F5CEC98FA38A6
-:10DB2000E07DB1C3FB34C839B1B37B4163F3391B2A
-:10DB3000F7046C02C37ED3933C4F53F239B5F7BB65
-:10DB4000F5DDC7C9E324C412E3BB4DFD7D8318DFB7
-:10DB50009D2C9F83B8A27F57FD84B8889FD006F381
-:10DB6000A86A3C53FF3EE289FB091CEE533283FB5B
-:10DB7000D47366F63B3706BE38C5F347160A0CAFBA
-:10DB80002A7F9FEAB3777C780F8D91FF848D576D44
-:10DB9000184FFBFDB443C6385C25E51FE01B61E36D
-:10DBA00078CC5F171E1BFF28E4257D7644C4EFE583
-:10DBB000172CF8BDFB679E0D7320CEF3BA8CF7755A
-:10DBC0007FD631359EC579F471E8054EB6CE9FE615
-:10DBD000725F726115F2671F7F342C5040AE4A2E7F
-:10DBE000AC457BA6648B80F7449240EFA14912E7D5
-:10DBF000C309D0FE6CE132C0F7C406DCDF28DD6C5F
-:10DC0000F6AC12FAD3F9B4C3ADBB57BDB46B35F65D
-:10DC10004BA83D95A4D9EF3EC5F3804B2FB0FB0137
-:10DC2000892B405280EFB9DE89F0AFFEDED76E6BF4
-:10DC3000F438FBD7DC9E29B93041E73744E6F77D5D
-:10DC4000269F7C3D2FEDCA6770F5CD67C3F868F35A
-:10DC500089CC6322B6EF4E883E7E06C7F389DA325E
-:10DC600038B941CA1456AFA4E13E05F449495342BC
-:10DC7000A2A099576963852E0FA3B4A95899ABE95F
-:10DC8000374207DB6F278D88D02163AD7CDD323BC7
-:10DC9000ACF7450E278CB77161DE4FDCD01FD33F48
-:10DCA0001FCB0DE935A85FEE71463BD790E174EBD1
-:10DCB000E24AA58D9C3ED44ECED5D047A58BB1FD72
-:10DCC00089E6D2BC9F403CF909762B486CBD63A025
-:10DCD0005B4674BC4DE8C35B26E6035D1A6FDFD17B
-:10DCE000E5FDF4C31BA7AF8A17F53DB58F72005F42
-:10DCF0001320E03410FA61F4BF14BE22E372FA4F2D
-:10DD00008A3E0F5FDF3C969000B51FE65F721E0FE4
-:10DD10009280E522F350E94FAED6D1DFB776E475B5
-:10DD200020872ABDE71F7802F9773E9547D8973FAD
-:10DD3000D9709F6E7D88C01783EE2302242BEFFFDE
-:10DD40001CDD3F9603E990F71558C7D691531B1F6A
-:10DD500049D7E279B163D202A00BD934F0B2D68FA1
-:10DD6000C0644F871BD72519E361BB1D3EBF93BE1F
-:10DD70002FE37EF5F284C251D1D67DEA174E84F8A6
-:10DD8000735DEDB489106F93B9DD08BFAC05F6265D
-:10DD90005C811EED7EAD064ED7876A6B307E4D2CC2
-:10DDA00001E2D29EF725CC2EFA9AB0788BDA4E910A
-:10DDB0007D2E887F2A0229427B4EF2ADC8C8853865
-:10DDC0004652764083BFB54E66D7AD4E39E0827C71
-:10DDD0005233ED1FE2319634E9BC7E9F9295B385B4
-:10DDE000F132CC474E0A118C6766D1F71A7C2B4969
-:10DDF00014CE8BF89B92C589FB451261769A3A7FC7
-:10DE0000FA06D7B387F9BAB40CE2B849608799D05B
-:10DE10001F5ACFE394BFAC2DE27890701D3327B02A
-:10DE2000FA4A3C83DB0A716B11D6D530961D70C35C
-:10DE30008E885793E1EF8F261037FE4EDF0012AE2B
-:10DE4000C77B4C2675DD0FEFBD71BE2DC0075FA4EB
-:10DE5000767E20401CBAC87725ACBF8D6220DB4D92
-:10DE6000EBFF4AECCD867AF0FB5EEF25B2E750C8B7
-:10DE70005BF669F6A5D8BD9C6E6D5CCF581EBA44A2
-:10DE800032ECD77C73A5F67B739C7717C091F49125
-:10DE900080FB30755676AF4F9DE3B67858BF8F72D2
-:10DEA0007A21FD817F3A981D735E72C727627C33A9
-:10DEB00033E735DDF81E5D59E2FEDB26CA8F92E6B8
-:10DEC0005ED61192D704FC32B281BED7D22F4A5C03
-:10DED0002DD18ED7DF46DD8751E1A3E312C09F78B5
-:10DEE000A190ADAF063ED82330F8030EEE6F9180BF
-:10DEF00008F49CADDE172C2D6765F5F722808A1497
-:10DF00008EF7D5FD05B29C95F93EA57F2EDB8734B3
-:10DF1000C233BBFDE14E88EBCF6E4F9D07FB53B381
-:10DF2000EDA3FE0CCF3D72EF8138B003EF13F0FC90
-:10DF3000C78F7FFF9A1C479F3BDFDE88E78DCF723C
-:10DF4000B9BB8BF4E23DEC3EE2E2FBE4417C3F17DF
-:10DF50007E600ECB2119FCF439E1E08F6EA0A53B69
-:10DF60005F0BDE0066DB5D1DBDBF0135E00BB90A4E
-:10DF7000710F406DD7E639C4CAAC5D040F166E8FC1
-:10DF80005A705E91795B100FEFF7E58D07901E7D5B
-:10DF900078E2F72AA978E99B77FC6DD321CE1B4B59
-:10DFA0009FCDB667FE996D7E30B88C78FA0C3E51E5
-:10DFB0003BF233A7D71A4FF5DB474EAF0D9E959630
-:10DFC000DE746918CA8B13CAD5A26F6832C5C3D96B
-:10DFD00021BE2B07023E3A075C961EFDC0CAF40024
-:10DFE000C94DC7F9A8F7BE1F7CE0A403ECCEFA9D8B
-:10DFF000EFA6C3B34AEC5A733BC63745F487CEB796
-:10E000005E79D1F3611F40DC89AE7F23E3553E6426
-:10E01000F3BB9B9FAFB9BB350ECFD7DCBD44D4DD7E
-:10E02000DB7CF712967747A4CE31B7EAECF5E53101
-:10E03000FB813880B19F794B26938F06C03EAB6B36
-:10E0400012C6059E61FC356F8A57847CE4092B0457
-:10E050008CB78C3FEE6EEBA2E579C104FCBDA379D1
-:10E060000F2CCE817B08AA3B597C6F90B828FB67A8
-:10E07000103F39C0D671282F02F9B67BDD764DBC32
-:10E08000BF5BAEC9867BF70277DABDC03FC5B77A02
-:10E09000DFC7FB1C781C425D57773516631E6BF19A
-:10E0A0001C773ED0BD3864C5DF1F2CB610C946F5BD
-:10E0B00058B1442CF01CA410C90A4F1BB1C0336FD7
-:10E0C00019BB27BBA47126DA07CEFC2205EEBF2DB3
-:10E0D0006E7FFE73685F2A85F7B3732D0C3FC5ED25
-:10E0E00087BF02FE59E02DC2BCC3EF6C5174FEDF46
-:10E0F000E890BE7C4D9BBE9C1DD697733AF4E5AD6F
-:10E1000070C799C68E38B0D78CEB44C519764EEFE0
-:10E110001501D62688079B519E0A2ADAF3603FFA3A
-:10E12000CC8B0E137CDFF317E6F7F66EB5E27D6F4E
-:10E13000FBFF602336C82B7CC9BA11BE9FB185F2A4
-:10E14000200E47EBB3DFD92A0A8D02FFEDE5AB5570
-:10E150003F3D3806E6F5F25F599E4CEF5633FE7EA2
-:10E16000CA99DDCFBF08FB6267B65E8176D62B42C7
-:10E17000C004FD065632FA1BF9B4628BDE2FBE3F97
-:10E180009EE99B1E81E1FBCA46FDBCAF0AEACB3F7C
-:10E190008F67FED45CA2799F01FBF7EEFA14585703
-:10E1A0009F8D7EDFF0435C2E5E784151F956E4F797
-:10E1B000B311B7E6FCD29EC8FEDDBD57405E05E058
-:10E1C0006258E47D85615CB5FFA278B60F9FC4F705
-:10E1D000677A5F17113FA70DBF5BD867D7D5D6A465
-:10E1E0004ED1AC43258DFB938BC13F6ADA9F3C57E0
-:10E1F000B3BE546E3D987C07E62549F8BB4C95B3F9
-:10E200009F5B3B2109DE8B218017BE43DCAB3BF4D7
-:10E210001B27D4A3F6EE585183F7D2C6FB52A7684A
-:10E22000E4F46FE54B559E2AB97DB22BBFB310F2D3
-:10E23000C42B1AD9EF3755847E740BFCFE22696219
-:10E24000E74CF324522452F9A9DCFEA31FC2EF715C
-:10E25000F99F1EE701786817B7C2FB8A964FF03C1A
-:10E26000C12AC3EF08A8CF7D9CBEB47ED844EBAFD3
-:10E27000BACD5E06FA89F6FB1A940F646EC4FB4DA4
-:10E280009CA7589C96BE7F0F7E12E5D4E4C01B77F6
-:10E29000D0A66748E89D1B3260DE7A3EA37C2B80C7
-:10E2A000DDD5BB59C0DFB5A59656DECD60527B9754
-:10E2B00062DE2DFD7E77B4F3CE0B83FA7E8CF4FF05
-:10E2C00003E75FFA97A9E52363BD013302782EB116
-:10E2D0007209D5771A3BBFF27803DEE7681C078323
-:10E2E000709A7C03582FDD28DF56F5FE21C192C7B6
-:10E2F000F36687B332DE5B08FC4A19A5E26A32C5D1
-:10E300000DF8BE994C83E72B4278AD28323D8171E0
-:10E31000A06D71A827BA5D5DCF3D05FCD5321AE32B
-:10E320004F83F979CF6E7718EF79ECE1F1C96E1769
-:10E330002B97B75B310FE6CC5905F5E8D2D04127D2
-:10E34000D0A3FB45AB097E97F4CCF60193214FB2E5
-:10E350003BC4EEFF3D1D1A80BFFF1A6BDD32EA039E
-:10E36000759D3C06FF84F534DEFB35ACB76439CBD4
-:10E37000231D34A0263BDAEF49A8ED92949A6CF065
-:10E3800053FE17A753B28F00800000001F8B0800B8
-:10E3900000000000000BDD7D0B7854D5B5F03E7316
-:10E3A000CEBC92996466324926218F09841020E000
-:10E3B00024860814EB24040C187542D1A2B63880C8
-:10E3C0004080BC44DB46A55F2624424251428D0872
-:10E3D000087140B1F48A6DB0A8C106EF80F86AB543
-:10E3E00037DADE5EB5FDB92370295A1E23F452DBFD
-:10E3F000DBD67FADB5F799993349AABDF7B6FFF7DC
-:10E40000FDE9478FFBECC7597BADB5D75A7BADB55E
-:10E41000F744BE6EF1EC2D60F01728509C8C5DF235
-:10E42000BB3C9BA0BC4482573318333A7C465B3AD2
-:10E4300063D672C6BCF0CFF186BC5786FA53B2E7FA
-:10E440009BB6718CDDC57C0686CF72BF818D853E03
-:10E450009DD0388BB1650A0B290E782EF4BE2F4D56
-:10E46000A53263D07FD92E29D801FDEFDA6C64CCB8
-:10E47000C4E8EF33F8B7A217CAC5B1F22A16343090
-:10E4800019FE63575C3B187F95123A2AA530B6DA1D
-:10E49000C442C930EEEAA7B4FDD6B010C1D370E0D3
-:10E4A0003363FCF8303FC600B4FF64EABCBC6EDBEB
-:10E4B00034C69C0628C3BC236FEB838887FF907DFE
-:10E4C00034AF35CC4FE3DCDE5AC54EA531D67C5F88
-:10E4D0006BD65DF0BCD87A7FD65D57433DC201DF75
-:10E4E000B730DE9FC1BCF601CED654B3502EC0B7B4
-:10E4F0001CE69B5406E541293405CB26164829E342
-:10E50000EF53CBF87CBD71F0D5B31EFA5EFD2EED56
-:10E510007BF68B34C267031BA27AF6545C3DE0A302
-:10E5200041E0A1E100BC8FC3C3CC0352C07A159671
-:10E53000821D19005FD359C63641A9E9D06746CD7F
-:10E54000F8AC8731C04366126366A0D7A3125BD4D0
-:10E550005F42FD26D64D8136F8771D96DBA9DD0991
-:10E5600081BF476F5991E587765BEC50CE16089EC8
-:10E570000EDFD0E1C7A91C32C17792AE8E96A9BE3C
-:10E58000623D2FD7D98A6BB6E730B64DEFCFB201D7
-:10E590001297C9BED77480BF271DFE5B90DF96E936
-:10E5A000BC790ACE97798B7C00076BE57878ACACA8
-:10E5B00065624B490CAE187C9CBEDBA4FE900EF845
-:10E5C0002C7058F2EC7323DF46F47E4BAC5DB34DF8
-:10E5D000A279A41E0BBF3606E9FEBCC4F642BB1DE1
-:10E5E000D287AF8D817E3BE6B95907945D4027B94C
-:10E5F0000CDFB34E09F0527EA8EEEE5791CEE549FE
-:10E600009EF1F0683C5429375A68FE77FA009ECC98
-:10E61000E4963D3AA8CFBCB3B80CF91BE67DE702FF
-:10E62000787FAFCD4DDFCBB270BABBD6070AD69696
-:10E63000E0F77D77BF0ADF8B4C49F2E0F7330157F3
-:10E6400056073DBBCCD88EB54BD8EED1143E7EBA22
-:10E650004EBEB30ECB65BCEC582779F712F36DA50F
-:10E6600079671A590DC289EF8325B464BC07A93EA6
-:10E67000C8E93BBBA514C7CB1CC79F4E432807C79F
-:10E68000794BA5F760968E6520BCF0DF00CFBD0703
-:10E690002B331DD0FFAD732645970A4F176343D820
-:10E6A0004E0959183E0B8B797B93685F3A3B1317E1
-:10E6B00083334FDBEEA2DE9B7A35E025F08ECC90E3
-:10E6C0001EBFB37853EDD0EE4B063E8F443AF62191
-:10E6D0007D603ECD9F02E46971745B74C580E33553
-:10E6E0007FAAB0E0D5B1F7E7DA4C2C58142B37D419
-:10E6F0001F9B8BED1AD9D006E4ABC6FE64168CE3E3
-:10E70000F72F258DFC5D95BF9B3FD5B1401AB16FAA
-:10E710008ECF8AF8896C588EF01F91D83E86F50608
-:10E720001688FB7EF3A70E6D390A67068D136BC73B
-:10E73000B4ED067E4FEDD8F4700A7EE7822D9CE2A0
-:10E7400010F3C37ED9326B41BA5C0CEA027A58C727
-:10E7500017DCBCFE226335FD96587B75BC0B8B0C19
-:10E760002C44788FD0B8889700C8B69D839F18DC5A
-:10E77000506E183C4A7851F9211E3F8138B991D129
-:10E780003114D2C19AFE856D5557891948714C5D77
-:10E79000BF6BBABCB3A05ED669D6737279747D9331
-:10E7A000587954270B79D0D0553D2BBECCDBC7FA16
-:10E7B00037D654C3FA2F2FE1FD4FD89ADE58AFC495
-:10E7C000E411CC230FF1122D9B12CA16284F892B6E
-:10E7D000DB12EA9D09F5AE84720E6F7FCE1ACA93E2
-:10E7E0003D8C7D645B5BA3807C3997155A2C417905
-:10E7F00073C7BD35D520E71ACB87BC32CACF41C914
-:10E8000023B118FE9A3CCC1B04FC593C61C3B212E4
-:10E81000C4C3D06BB8FE1B06249B047C6EE93F1872
-:10E82000A232F673C7F5EB97A85F43FF87D46FD486
-:10E83000F18B75B48E37159FA4768000DB69A0D369
-:10E840005799C45201A5058AFF8FA8BF1AFB7FC341
-:10E85000F52E8B18F8FCB81CBC90E57D85E4E01122
-:10E86000C986EB2ECA7738AE25C6EF6AFB5F4D1915
-:10E87000FC571C26F9DE4FDA1568FF7F1A7F338DAF
-:10E8800001A97E854D66A05C0D4E447DBC93F927A1
-:10E89000A21EFA7AE3F8A33A6877421FDECD005F42
-:10E8A000C5F64D350AB43B610DE74A2043266DEDB0
-:10E8B000E5E5F4F06EC46760EBA384DF13B9E15CB7
-:10E8C0001D94A7DA43BC3C3EBC1BCBB76E7D86973C
-:10E8D000A7847365E83F3670A0A61ACAFB6C23AF05
-:10E8E000D77C3B97E32A7C97C779B3EDE9C8765C80
-:10E8F0004FECD603C6401E2E5EFDF1B3FB000F8B1E
-:10E90000EF4F2639B5EFDC57E6FB68FE019F520159
-:10E91000F290B33ED763248F15B203B250773962B9
-:10E92000F4B0E60DB949CE4F6A3988FA3E737109E1
-:10E93000C9F94F53BDEDF669B1E72719F00438DA8C
-:10E94000ED362E97659D97DA3F6025BB678B99CF93
-:10E9500007D60DD1D722E8512EE6536ED7D133CF4B
-:10E960003687C6FB40F2EE30C9F8640133D27355E6
-:10E9700012D91977EC01B90072B957C0DDBB7562C5
-:10E980003000E3DF21311FCA8D5EBB370BE5C30BBF
-:10E990007F91EFC4F9F69642199E3F16F2BEB7CEAC
-:10E9A0009B658FD38BBD7B78BD2A777A0B787F559B
-:10E9B000DF6476F0EF646E99B817E791AC302F966C
-:10E9C000972F2ADADB4E7A7B01CD9B79BD5912CC89
-:10E9D000F7F4AAB13AB42355FAA4157A6FC2F9DC58
-:10E9E0008EE35B627452BFDF8EF346BD2F83DE87FA
-:10E9F000F93EE0F0D3FCC10E984A76A0B003DA717C
-:10EA0000BED362F8654A781ABEFFFF084FF760FD73
-:10EA1000FF144F23C88B00B66B6C0579A18B93173D
-:10EA2000027FDBA4903E93CB0B0FEA397CBF00E45E
-:10EA3000E3ED36FF468447FDFEE2071AC9EE53E1D7
-:10EA40004AFED68B355F65C3D759A25D76E203D304
-:10EA500066067AEC84A19FE4E289F9CCD38EF24376
-:10EA6000C7EA118FAA5D5971FF9AB718D8B397ED0D
-:10EA700032D1B95BF266E1BCBA81AE26D4C37586E9
-:10EA8000E0BE82985EECB50777AC40BADE52E20990
-:10EA9000B8493FD27A0BB42653BB5E7B9829583FC6
-:10EAA000C36D034890CE448FC86D86E05E09E9CD02
-:10EAB000F9A577D5A4604022BA07A8FF6D9C7F7A9C
-:10EAC000EB18D9F7BDB7B9886FCC2C68467846E308
-:10EAD000838C0E467CC414EFD43A6B0C0F3F13EBBF
-:10EAE0003AB93CFCFCBFA11DB9D94C7624EA4CDCF8
-:10EAF00077B19E4C8217E8F902F187BA5F7A242B2E
-:10EB0000B889F6679E0AA4C746AB7709C1FFED64D2
-:10EB100037C2BFCBCCBA4C65B8FD609D24EF043C36
-:10EB2000ACE73186F6D99DC23EFBF7FA4B56B403EB
-:10EB30005EB573FB0A19C504F26F29E3F54BD725BF
-:10EB40007F88FB99A5EBE49011F62BAC6B8E371CFC
-:10EB5000B7CF208E82F1FC425EB2ED112BF28D1FF9
-:10EB6000FBA5E0F87FB4BA2D5886FE5391ECD0BFD8
-:10EB700038D6FF3DB16E17CB1C7ED696EC46FC26F0
-:10EB8000CAF5F754F87A1EF3C67F4FFD4EE2B8B0CF
-:10EB90008F7B1FF105780FA5A23DFF6D99E89A08BC
-:10EBA000AFD31079C80CF58BDB64FB7AC0A7BFD557
-:10EBB0004AF355E1BD3333722DEDAF12C63F93DCFE
-:10EBC00054A1E0FCC5FE83ADD3EEBF1833C4CAC068
-:10EBD00017CB5984F631C3DE8B7D6BE2BE8FB1BF9C
-:10EBE00018E3DBA9EB85B9A504F8055FB92505E9AC
-:10EBF000E69738DDA2F44E805BC5A7EC18199F4E4E
-:10EC0000433817E595BFD5487848ECAFEABDC7CC87
-:10EC1000B03E80AFB64B12F1E3F6FB92498F311351
-:10EC2000A763F3EA2437F2E74E43E4695A372F1912
-:10EC300019D2F5A239F202C9A342EE37B8F83379F6
-:10EC40000FB6BB90CEF9FAC2613DAD270E0CD83B92
-:10EC50003F93F752BDC4C7BDD09EECC6F5D88C9883
-:10EC600084EF3707FEAB8D01FE4EE9F83EB87940E0
-:10EC7000BBDFBD00FFEACB6272E122E3DF090C706B
-:10EC80003900335D45DFB923896D82719B7492171A
-:10EC9000EDA3A6D593821D9C5F4CB85E1A04484D27
-:10ECA0003AD8F795C5D67793EE6411EE9B1A4C9B34
-:10ECB00087E414AA3F8EFB2D86FB25E8B71A3B1587
-:10ECC0000CE7E7A6CDBFFD33C2DD74484BF78618CD
-:10ECD0007F489F49D83F8E5F0A627C40F635CA87DD
-:10ECE0006A161C2F713F0C96936B8682E887691613
-:10ECF000FE89F463E1B9C81FD6F27EB6149ECD67D3
-:10ED0000B97D317370CF2BB8CFB5D70CE5E2349B0A
-:10ED10005BD75E7DFAEA187D5538670C6E9571FFFA
-:10ED2000A6DA2571FBC7890BA6C43FD7533FDC8FFA
-:10ED3000E2F7C2F80AD785C2F5D936A1CF40EF91E4
-:10ED4000DC5DDE3381F41EEA25945FEA7E16E51968
-:10ED5000CA8F271D558B1C30CF92B4AAAF38A6F1AD
-:10ED6000EF901D8F9BA019C3F199A857D476B8AF27
-:10ED70006DB18CDE2EEAE7D991CAE583225179C5BF
-:10ED80004FF57B36117C0AF1CBDADD05246F557F18
-:10ED90004C83F043AD10FE9B15C27FB372BB91B99B
-:10EDA000E3FD55416DB941ACF74616E67EACFD502A
-:10EDB0001FEFB7A966212BD6A3FF069FFDDAFECD74
-:10EDC0002C385B41FA0E7C668C7FCF7AF97CEF148D
-:10EDD00074DF61E67E9B99EBF6C8DC19C5E79B5AA8
-:10EDE000E62D7810F5C49B7AF22FFC87A0938A1742
-:10EDF000A3A3EAEB88EF24DC8F61BB078D8497D354
-:10EE0000A08F0F0ABFC602DC67B6F9B30A0B113D2B
-:10EE1000B6BC05D6E1F8DDF492B91EF965B343A797
-:10EE2000E1A72A879ECAE4EF41BCB727935D0D682E
-:10EE30009E8A7C543156D5936C2AFA993ED483BD70
-:10EE400005E5A65B2D7E1C2F8C7601947708F9B51D
-:10EE5000C361A0F1D472741F27F805BE43E3A1DF9C
-:10EE6000C517C707C168FBADC25EE47261DBAA24A7
-:10EE7000924731BED531E2DB129F01FD452F0939A2
-:10EE8000F2122094F651FD662E47142E9F5E3A3BF7
-:10EE900089E4DE1B1FAF26B972695112334AD4DEF2
-:10EEA0002B61FDF3C6E07A28DF25FCA82F49DC0E94
-:10EEB0000C1CB1D2380D06FF0EF42B343C37DE03A8
-:10EEC00014632F1882DF7F1AEB5F3693DFAA218548
-:10EED000C3D9F0D21892933FD6079FF901F9218C3C
-:10EEE000649F3524B953A9FE27690CEBBB92FD83BF
-:10EEF00048CF6C23B71B1B0CA1223BE0F16490DBD5
-:10EF0000BF2751D0E0F88356B26B00CC2CFCFEA991
-:10EF1000EE4CCF26770C2FA71E9A4CFCBF4DCFE9A5
-:10EF20001638CCFD9A27F5BEB959503EF97CA90791
-:10EF3000768EECA2CF1032008CCD5BB8BDB64CE71C
-:10EF4000EE6B45D9F472B247B3DF7C78652DD637C6
-:10EF5000AF5E7713CAC1D1D633CAF3787FED0516F9
-:10EF6000C9A3FD66FDD8FE107CF7C2E0440FA94797
-:10EF7000E60262039FD878DBD37AC037F2D7113D1F
-:10EF8000F1EF171D1FE78BFB3FD42FF89D6690BF55
-:10EF9000513F32C9DFB8B23C5299D3B3F9A54C61A5
-:10EFA0009F69EBEF48F55F40B9D6F4DDDF9F682538
-:10EFB000FC4648FEB11EEE1F3FADF72E463EB5574C
-:10EFC000870C4BE3F6B78634BE8E9619855E6721B3
-:10EFD00043FCBA53EB2BAAB47CAE3EF5697C1F69A7
-:10EFE0001DE2727C78BD4EAC9BAF18516F71D70D8E
-:10EFF000ECA7CF727F8621CD4DF533CF860CCBA009
-:10F000009CBF2E6458219EB82E00DF2113CCFBF448
-:10F010000E2B5FCF80061C67C57446F6C80A19EC34
-:10F02000D0327CEF1E08035DCE3C6FE7FCF527C0B5
-:10F030000AE07B0913ED8C60B782DC7AB1530AA138
-:10F040005DBF64BB71AFB900D7B157B6223D774BF6
-:10F0500024B796745616ED80F2EA435388FE29D3FE
-:10F06000395FAE0EDA49FFCD147270993168203BDA
-:10F07000FA19EEA783F1C91E6E804E5965C3F1805F
-:10F08000F25BC30F416D9C6166BF90A7FBE3E20B8F
-:10F0900063E3E47A7F427FB0E3B4FC1150F50E974E
-:10F0A00073CC9D89724E95C34687AF348DE452610F
-:10F0B00026D217E8C9E5E44189F0DAC85AB8DE106B
-:10F0C000F23EFA5DA12FCEC801AE978C5BE93937CD
-:10F0D000AD80E8B61AF50DF9CDF9FE6E343E989B79
-:10F0E000A6137271643EB85EF041C35916BA16BEDB
-:10F0F000D7B08E851AA7F2A7752AE941AE0F4D2227
-:10F100009E61E2F18ECFD38B897A7098DE4BD077F7
-:10F110009906A1DF049DE3FDD9A8EF67AE0BCAE80D
-:10F12000D7CCB379AFCD4C8FD92FCDEF994CEEAB77
-:10F13000B0EC63632DE89FA97CC685FE5DD88FE3A4
-:10F14000BA4A06BCEC81F7BB55FBD6C5E7EB32707B
-:10F15000FED52B3E566A41BA0CD17E3592CE6CC894
-:10F160008F2A3E775BA15F19F6E3EB2DDADFC43A15
-:10F1700093E2FA57BD6426B97AE5B0356824BBC37B
-:10F180009F6F87F1327E65243BF4C24B56D29F17A6
-:10F1900084FE73AAFB7EB681E8D38A744D476EAABB
-:10F1A0001A83FE5326CD1F832250B5C31AEDA3F94F
-:10F1B000B3457DC1D0AD9CAF8CB45FBC620F7F13F3
-:10F1C000CB000F43FBBA05E98CFEF643B34B1F801F
-:10F1D000F7CD3E8B8763DF5F8AFC6A94EFBD15FD38
-:10F1E0002A73E57591FB601E8DB9169B11BA54E721
-:10F1F000FFFA97B741F9A3437A66443AEF9BBD887B
-:10F200008D1D5DFEAE0AEA4F86E3D6CB9AFDDA721B
-:10F2100063BFB6DCCC9493E13879FC589AD5796613
-:10F2200032C90ECF67C0DF4663CBD93D00AFF1C70F
-:10F2300046D2470D69FE5D69E837D5455E433C1B04
-:10F24000F3CF4D453F4555FE9F28AE73E5DBCC839C
-:10F25000705F315792FEBEB2C3EC0EC4C9AF66C137
-:10F26000FFBD79B554DFBBD3E896787DEDB40AB421
-:10F2700007E9DBF867D201FE9BB7CFFB88F64D6844
-:10F28000B543B917ED4BECF79C146C47FB713BD7BA
-:10F290007BE7C17E34A1FE14EBA9591E9C6B82FF53
-:10F2A000EC75D44C44F9A2FC59F121FD37E25071C0
-:10F2B000F6EEE1E8FAE47E9C1BD08F338EFC3887B3
-:10F2C000516E349AC2864A18E7BA3FFF8EE4F2CAFA
-:10F2D000D6A564D7C7EC5C23C99195F7F9E9FD2B56
-:10F2E0003BAEA7799D8179237ECEECE6FBB99539BB
-:10F2F0009620C2779D9DDBBF2BA19F240DC74B227B
-:10F300001E7EB3EB7A17D2FB378C7F2FD0CFED84E4
-:10F31000DFD8865248FEB85B52D0CE6BDE7EFD470A
-:10F3200028B756EE963DA8C7D9112BF93D56EE9E4B
-:10F330003371B905C7B99C568978EB9B6393E9BDD6
-:10F34000EC0B72FFC9D075F05EE9BBC68DEBE4F83B
-:10F350006E2387CF6E7A1AE1BFEECF32F1BDA26382
-:10F360007EB4577B0DDE89B8DEDCBBF6CD45BCFE36
-:10F37000A62E5B47ED9F95980DF1606FCDC0F72BE2
-:10F3800025C587EBAB7EFBAADA787BA4334D267CC0
-:10F3900057E6AFCB085B88DF6F453DD7B85B4F764C
-:10F3A000DDF1051FFCF236678CDF57CA3DB7CE8C06
-:10F3B000B3379A77DD28F8013436E069A5C0933178
-:10F3C0007F5D117EF7F3F87FE5FA96221E8FF9EB49
-:10F3D000EB20BABE77F1F5F007D0F7B45FCF7168D4
-:10F3E000ECFBD1F641AABFD9E461DE7D168A1B7A17
-:10F3F000719F9BE754A83ECFC9ED6CE50F6BF7BF3B
-:10F400000DF0F7A7F98D4E789FCFBCA5485777C46C
-:10F410005605E6244E89EC1FB6CBC8ED4985FBDDC9
-:10F42000B6A5B3A737C5C1998DE3A5D3FAB43961A1
-:10F43000DC0BEFFFE935C45F53DEB9A93C9EF63B18
-:10F440008A4F590679DCD2E2F131E48BE6C13A7693
-:10F4500057494C1E367BB8BC4E9CD77227DF6734A9
-:10F460003B23344E753A5F67AABF77676B12F9F595
-:10F47000763A8366BEBF0D3094E73795CB3CDE22EB
-:10F48000EC129FF09399BCAF308CC7308FEC190F02
-:10F49000E521EFA9CE3428BF5D3EC72343D9E27DE5
-:10F4A000B26B2CCEDBA317F5E3C85FF8D6AC4AB23B
-:10F4B0004F6EF2CAF45D569F42FBF521EFCF9D7768
-:10F4C000C1776F66DEB4D3F08D1A50D648C721FCE1
-:10F4D00036DA018ABFDC19E75FBDD1332FED74BC8A
-:10F4E000BEF472FD8FFBF17E113718090F25699567
-:10F4F0003311BFD77D99D3E1E367F9FEE36333F7B7
-:10F5000063ABED3EB6723D53EB94841DD89F87727A
-:10F510003E5AFE5AB1260EEC34F4E7E13AFBADA4B4
-:10F520001D6775978EE2B3ABBA18C5633FFEFE8BBD
-:10F5300079286F3FDAF762DED238F812FBA9CF5B89
-:10F540009D5ABF94EA87748AB8F4528F91FBFB46A8
-:10F55000F143AAEDD976BE1FBB08D21DF94EED7757
-:10F56000B13EC98B76E545662279B67450F835BD53
-:10F57000DE4227EE1FD4FE09E36F41FE01B8A4016D
-:10F5800089F6E7C9251192AFAB4CBED7C6B8312F6B
-:10F59000C54BF499877494905FBD069CB722F679A9
-:10F5A00046C5D788F45CDEA3A56396D326E2944EC5
-:10F5B000A2BBA1C9A2A07EC8E810F2FA1B3ADABF2A
-:10F5C00018B25D16944BD715257562DCDD9994321F
-:10F5D00015FDE6B9D9C5D43E50C5F93A90C1C86FFA
-:10F5E00095C55A2492B736EEE7CE99CE6C98E7F1DE
-:10F5F000A293DB832EE6D92E933DD82F91BF5FCC0B
-:10F600005F95EBC82F28E73E964CC42FD2A044F656
-:10F610009DACEB5F8CE38EC63FBD09FCD3FB0FE6D0
-:10F620009F3EF57BC3F8C74F71BAA52ED3C8FC2304
-:10F63000FCAA5FB8FD6871C26F98543FB384F3AD04
-:10F6400015E3D59A2C21792AC98773F1FED45D6020
-:10F6500067E27E448D2B8EE958E2E676FA5018F781
-:10F66000E5C9D79848CF7D47375480F67C629C1116
-:10F67000286B47798F3286FC8AAD55BED36971FA03
-:10F68000FE08DF3734DDE7A5F7B307B97E6F2E3408
-:10F6900090DDD93C200590CE4D3E43D0544071952D
-:10F6A00025A4B71F32BB799CC4DD4E71926FBB7924
-:10F6B0001C25EA470DF73D80FC566F21BF4362BC15
-:10F6C000E585BFC8FCFBE3197DBFB794C7777AE730
-:10F6D000B9C9AF911847635DDAF5ABC6512E5A012F
-:10F6E00031F0BDA59BCD44876C99E399A59AB87E6E
-:10F6F000192E07C85F9B315D1046C43BA2EB1A244C
-:10F700000396B345BD1A9FB196F80AD0C2BD3DED30
-:10F71000B93793D2FF967C86D6EFFCD57C8680B134
-:10F7200016F3194C683D8B7A041BF4AD5AF69ADD3A
-:10F7300018BF89D52B60379A0624F1BDE76F98531F
-:10F74000087890D4EFAFDFE4B550BC58F3BD78F83B
-:10F750009484F1F530BEC52DDA070ECC9BA3505C26
-:10F7600052D47FD68DF91B5BF4DAF108A5A23F16BF
-:10F77000D4EF1DCF9CFB9DCD3931BD0F7680297D07
-:10F780005A4CFF6FFCA0B6E72AF856B2EDB201F56D
-:10F79000AAAAC79B9D3CBF2171BD3AD2F97A05FB4D
-:10F7A000D5914E7283DBB5B5223E09F6EC5C5C5A0E
-:10F7B000CDEB7C0CE393602F64A4631EC3FBE7CE08
-:10F7C0001C45FA2DF898ECF9E64F15EE7701BB03CE
-:10F7D000ED7393E07336A0277DABF2C16A217F7A87
-:10F7E000EDA0EF915F8F48D302C4172D79B7000DBC
-:10F7F000EE4FF7BA697CB1EF4A8477463AF7933413
-:10F800001757ED28C2F19F9218EAFB4DC52733D058
-:10F810002E691EFC3063795CBF55038F121E56EDB6
-:10F82000D78F38FF19E9DCBE6C3AFC3CF9073F0E74
-:10F830004AB496EB9560F74C28D7D7EBD04263E5F6
-:10F84000C125B791BF7F91818D87F9E50B7DD4BC30
-:10F85000FF2B8199B83F837F12BCDAE95B417A6F55
-:10F86000E7229305E30ECDC54BEF263CD892BC882A
-:10F87000874DC55559F89DA6BAB9368A13807D853E
-:10F88000F54DF7DD4E7E1315AE4D03FA1AB4BB2AC3
-:10F89000C0CEFA11C09DEB985FE381F537463E5824
-:10F8A0007A8F05E3C223CBDF7FC9E0F4EC947C813F
-:10F8B0009BCBC94FC8E2FD7EF903DC9EAB4B37689A
-:10F8C000FCC275E9DCCE9C15189A8DBCF7B2124EBD
-:10F8D00046BBB799793FC1FD25F359DCFB884E5CE7
-:10F8E0008E38DBDCE43F3239C3DFB90AEB6729B479
-:10F8F0007F604AF811FCEE856EA7671313FC8BE559
-:10F90000FB4A822847FF39DDBF18F9AC42D88F1770
-:10F910000E5F5F8A7E36D53EEADE630E621CB0DB88
-:10F92000EAFE6E0DCAC13F283CEE6D8A0CCD467AC8
-:10F93000FCD141E3769B83DD48FFC0563DD51FB621
-:10F94000FA5721DF9CADAB29A2BC1B4BA008E3BC3E
-:10F950007A670F433B01B60BE44F30397D0CE3A1CE
-:10F96000B3034B1409E57C82DD315BE48F92F084B4
-:10F97000F755428C8D072E3863A225D0F9595ACC01
-:10F980000E79E34F0B157CA9DA273A138F67552FB1
-:10F990004A6232F2FD86C86B3AF45F3B87C87E6DDF
-:10F9A000EC97E83B8DC5CF513ED81A917714CDFF27
-:10F9B00051C2940FB53E3D59E8F14ECEEF6C88F63A
-:10F9C000CBEC00A7276361CA938AED23DAA99D3A9D
-:10F9D0009E41F8DD1B85DF053418D53F94AEDA076C
-:10F9E000EBC553CDEBE2DFDD260D7965C46BA9A431
-:10F9F000F117ABCFA7D2B97D987A2C3217D76FE425
-:10FA0000B09AA7C9F330774C9BE441D369589EE67E
-:10FA1000C02773916FC0D0A6F5DA34F0C5F234BFB9
-:10FA20002FF60DFFEB799A1EC9BB179E3F4AB7739D
-:10FA3000BF959AA7E9E1F853E36C89F99917B242A7
-:10FA40000ACFB70AF7ED43FE1C30521E57EDC0EB4C
-:10FA5000EFA17EAC35B17E8C4326DA196DB6AF0CC2
-:10FA600022DF5F3C7FA6EF418679BA2F78285F239B
-:10FA7000C17E48DC27ECC52659A3DB7BEF46E9C9EC
-:10FA8000EDBD68F97FDDDEE3F67C601FCF0F50E54A
-:10FA900079B3D89F5DACBF94827AE644149E843CCF
-:10FAA00086A7441EC3E0C8790C8AC807027B3D4084
-:10FAB0007C7290C775DE783A99E4C7259BB217ED42
-:10FAC000A5F3D6C83711598AB0933A8F18DD282F7D
-:10FAD00040DE91FC0E1CD4F3380DC66D308EF3F26F
-:10FAE0004411C711F1A29792C96E694871A7627F4C
-:10FAF000354EF363A16F1A92787CA62BD97F397D9E
-:10FB000084B8CD1E617FED81A16C38DE7B4611C7C4
-:10FB1000060181FB9D877279DC41C46D2E8AB8CDC8
-:10FB2000A9625DC8C0FD10E4A77277292C0BEADD3D
-:10FB3000EF99836EEECF32E940EF2F53E3362F7308
-:10FB40003FD532119F39B5602EE5072DC7FC7719D7
-:10FB5000FD18DCCF1CCDC767361DCE670D888B9D89
-:10FB600028620280F56BE0B5A493D09E707742992D
-:10FB70008C656F4F0D7C7769A78EF623CBBAB4FEE8
-:10FB8000F22B9BEEAE41FDBDB193C71F035D12E9A1
-:10FB9000EF65CCEB427B43E587828C34A273A053A4
-:10FBA000E7C5EFCCC8E0FE04407D90E6279E9D7A35
-:10FBB000E1671770B4335D089F3A893F37DA949A4A
-:10FBC00011F5B218AF53DF62AA443B3657477EDEC9
-:10FBD0002B06EF22F2933A8A886E9DD696AE1A5E75
-:10FBE0004F6BE58A39E2A3FA6B156EE831B703E58E
-:10FBF00064668688DF24CC77798FB69C187F581589
-:10FC0000D4969731FF842C3C87B05FFB3E3383CB87
-:10FC1000A92B9B0A849FDF437EFE4EBDFBDD029431
-:10FC200053DD0AC9C9F61C8E2F5D2E7F8EB5572F66
-:10FC300022FBC00E7605C1CBE11F7BAD53427DD9BF
-:10FC400069E77CF93F853B11DECA8C226E27A071E3
-:10FC500087EBA85B0A727C71B8BFA8BF626986F0A7
-:10FC60001708F9132DFFEFEF37393F76CB62BDD977
-:10FC700048FE2C15F1C65392E7E910BEB7805D002F
-:10FC8000702FEB96CBD03E99FD150BCDA3E9657394
-:10FC9000D008F58DEBC279B88E9AAAC2452D23E023
-:10FCA00015A15554B905ED963A617F80EBB64B1B13
-:10FCB000871A1E57F47E2B231DF721A70EBE8EF444
-:10FCC0003E6826BD04FF75D488FE8EC305642F4DA3
-:10FCD0004DF5B765A03E4F0AF57DAF00ED136E1FE1
-:10FCE000350E1AF7A0FDB7B4537B6E866DD6C6B934
-:10FCF000589783FC19AC57FB1ECFA768FA0D8B7B76
-:10FD0000713DBFCDE09F8876DD755FE6F1F5F3AB21
-:10FD1000740CE9BB4CF6AC403972DEACB5BBCF5BC2
-:10FD200039BDFAA274F614219DFB46A5B3A708E9D4
-:10FD3000BC4CC7FCF1E334229DAFC6EC734EE7F335
-:10FD4000CF5F5384743E77F09A22A4F3367D8F17E9
-:10FD5000D7CD930EFF5EC4CFE9393EB29BD4BCC968
-:10FD60002FCA8F8732B4FA305AFE3BF93F46D3830D
-:10FD7000A1281C5A3DE834B873501E2E3519FFAA2D
-:10FD80003EC4BF11FD692623F9235EFED3E58751EA
-:10FD9000BF050665B23FD4F15E56FCE3D05FF0F2DA
-:10FDA0007B2E4F401A7DFC066157B94C2C807E0F8C
-:10FDB000D5DE57EDC64479FC0B319FD319DE1AB45A
-:10FDC000B355FF6CBD18D314BCCCEDD3A724F2BF40
-:10FDD0009ADCFD3C7FFEC8121BFA67CF06B93FB61E
-:10FDE000E9F952F2D7AE0ABE12C2FC273628D97002
-:10FDF000DFB0EAA90F53309E0DFBD0531971F19576
-:10FE000039621F7A36782A05E3DEF0FD6AFC7EB29D
-:10FE1000336240FE6D82FD1934614D4A84CE0D354A
-:10FE20003919E9FBF201ED7E4D8D4FEEF41948DEF4
-:10FE3000ED1C9482B83FCB30F80B72503FB11CDB05
-:10FE400099E4D87AF924C36BCB9C161F17F65ECEC3
-:10FE500088CB570AEF48253E0CEB9997EC801D564E
-:10FE6000219778BCE63F77D9833C7F89B7FFCF6085
-:10FE70000195557DBD429CC35B21CEE1A1FC0E25C1
-:10FE8000C8EFF87234DEAC9E3703791E1A29FE1DC6
-:10FE900097B714DFBF8945447EDE6746CDB8D17C75
-:10FEA0009D965237C0BDE66B163A67D80C7CDD5A7A
-:10FEB00016E3C3063115950F9B845FB7B9FE24ED99
-:10FEC000039AF17C05DA551ECE870DB03FC2FCCDFA
-:10FED000C475CBFAB5F98CA3ADE329995ABD122D9F
-:10FEE000FF83FC98D333B5EB579DBFEA078FCE73E2
-:10FEF00050E2EB2B615E89FBCA44FFB5BA2FFCA22E
-:10FF000072EDE64CAD5C8B96FFC172ED8ECCD1E408
-:10FF10009A363EF037CBB5C4384121F77F639C0059
-:10FF2000E3B6FFD338C147EE9E0C1DCFC3D7C44FF5
-:10FF3000BBA4969B4CE330AEC8E3CB8D5623C56182
-:10FF400013E3AACDEEB9228E38F4CB19A8370FE906
-:10FF500019EAF37ACB4A8A5736CB070C78A4705843
-:10FF60003C51394A76FBDF1A575F9F198DAB1760FA
-:10FF70005CFD15CBE5347F1C3DAB4AC0C02F193D5D
-:10FF8000DF68B3A053B2C88B302901668FEB3F5AAC
-:10FF9000BFDE4C6E27BF22F2635C069EC7BEC50A59
-:10FFA000FB3098BF4BC7F377EE4FF76D43F968729C
-:10FFB00073FC3E71F8AB0CCF1D3DA1EF27391268E1
-:10FFC000B478501EAA7E17757C45F80FBE28DFFF57
-:10FFD0002081EF7FF077E6FB447C0CA872E76F8D01
-:10FFE000876D07DC68D607A3B8D75B18CF2918CE72
-:10FFF000C7A38D331A3FFF34D3F75A26C947EF54AE
-:020000022000DC
-:10000000CACBFD82F226B93C720AFD3BEC90D18D41
-:10001000FB0D933897C13667893C4A4F451DE51360
-:10002000F3730DEAF98FD1ECC20FA3729ADB851F2F
-:100030008E2AA7FF7B76E1030EDF299CE7E94A6F52
-:1000400011EACD8D56801FF77BDF378E78CE423D8B
-:100050000F00FCC4CF9B3CCBE3E0897CF58704FD1B
-:10006000F287BFB37E194D9EEA5D2A1C7F67795ADD
-:10007000FFC714F47B8E3E4E80E0A8A81AF28AB81F
-:1000800015C3B8913A8FE6219E7F9621F2AAD4F744
-:10009000116117DEE9F266BAA0FFB9F74D26960A9C
-:1000A0002610F218DA633E0BC5039AFA799E48D3FC
-:1000B0003A46715FF51C65D3401D43BBAF3FCD5F32
-:1000C0008079601B3FB004E454F4932F6068EF5DC7
-:1000D000789F971BD2FCE3294F6C5D581377A8F8E3
-:1000E000ECF206F46700BCE41F708AFC4C15BE3AC3
-:1000F000179767EAF32681EFE8BC9C1C4ED62F07C2
-:10010000D14E4C760F911FA9E91037DE2A642FF9E2
-:10011000EBD91A079D9F683A54594AE7CDFBCDA504
-:1001200068E756FCAAD686FE8973D73A29CF204FB6
-:100130000EAF423BEB9FD3FDB3105E6B79701EDABE
-:10014000A9F960A7A2DD7BEEE0BC527F9CBF7B1BC0
-:10015000FABB61DC6D56AD3F9B99789E78FD5E9E43
-:10016000077CD8EA9F8BF8DD66E6F006B68ABC67A6
-:10017000E1E74E5CFFEABA8F9E73BCC344716955D8
-:100180002E6CD3333FEA3D559E94883C39C007CF4F
-:10019000D31BACE3F91EA26C716AF3154F67CC292F
-:1001A00041784AD0D13B0DEF518848E8775F2EE285
-:1001B000F0D78B7C0A357FCAA8F8BE8EEDD9BA9AE3
-:1001C00058FC7D2CF617F177912793FC29B79FC730
-:1001D000DA0CC43756585FE41F01BE41FACC8A0CD2
-:1001E000CDC6F34485BDA15988CF973FD5113E9424
-:1001F000BAB7287E928A648371C66D0E774F403FEE
-:100200008AED17D7225DDC3DB62A445D7F9AAF9117
-:10021000E0505A8A715F59F5AF7A9E07782499FCAD
-:1002200003BD790D940778E103E388E746D467803E
-:10023000ADA7BCBFB1033F273FBEF59034623E6718
-:1002400097CBC2CF0D078628BF8CCD72123E942368
-:10025000BFA2B8AFD2AD9007A353EFD5E139A84004
-:100260003B23FFE5F85E9B0EE9922FF24B2EBEFC7E
-:100270005F53FDB44F51FDF6419E0FA40F6FC07D3B
-:1002800097D21EFE32AC60D678C8AE6B2AC1F1227E
-:100290004D3CAF3D99219FE40F8C5BFF2528E7770C
-:1002A000D99884F2E7A535F9E42F85798E1F619EF0
-:1002B00077BB78FE8E722459877A4BD9CA28FF50B3
-:1002C000B1675411DC8F4219C65923F8468D470295
-:1002D000B82ED44777BAFCBB11CFD17332AD49FCED
-:1002E0009C8C3877696DFDE0593C7FD267E0E70C64
-:1002F0008FBD3C7901F9EDBA1509E970C5BE24DF5F
-:1003000006EFF78B756B558698CD128FFF63946F50
-:1003100039F608CF4B53F49C4F946EE71EF40B7ED6
-:100320009AEAA7BCD26B3B4332C5B36CA71FA97135
-:10033000C7ED6BB6733DD2B49FEFA713F7319FA7FC
-:100340003F8EBAB47649B4FC0FB24BDE4AD01B7F65
-:10035000F3FE8469F77589F649E23E6E98DD9D30BB
-:10036000DE68768A9AD75115FB0EF1C32B56D50E4F
-:100370000A68F25EAA2CE2DC9B493BFE53224F47FF
-:10038000CD83C9E870B7635E79E4DB8CFC6C6A3EB0
-:100390004EA08AEF1B023A139D8773B11ECAC31980
-:1003A000C3429244F67F98CE7566623E0EF47BDFC0
-:1003B0003596E0DECD3C5D32C943B784709B318F0A
-:1003C00083F236833B56E0776EB1D077CC98C77115
-:1003D0003586E2BD3B507ECEAEE771886CD0B7C8A3
-:1003E000B7D9859C0FCD8B783E879AAFA1E657A8E9
-:1003F00078A812F8CD9EB0A200F707DD92FFFBEAC5
-:1004000079DAF873D2D1F3D1ABC6D27993E8F9B9DE
-:100410004226EABFD839E9447CAAF91D5536BF2DDA
-:100420002B7DF87959953FE2E84670ED3CC2EDF539
-:10043000AA7A03C17F71D57CF2235E5CA563B86E96
-:10044000AA068D9CDF12BEB7337A0F46D04CF75DFB
-:1004500008BA7F9EBD0AF42C463FEDB1B69AAB4F69
-:10046000036E8FB7F9E879D12CF5CB57D179C6C592
-:1004700028992E67EDACC57B0A2E5A237978CFC117
-:10048000E5EC076FA4727AE4049653761EBA11EF76
-:100490003DB8383ED287F71E14EEACE4F5C883D9D8
-:1004A0008C5D9555716380E6CDFD4EB363E7B3CBAC
-:1004B000113F8D2CBC6188FC3B3C7F1FF3FD900EEF
-:1004C0002E8B81EC1997C8B364D522EF12233050DC
-:1004D000EEC82AA578B585B90F0D617D0E3F2704BA
-:1004E000F5C4BF1DE3B95FD824E8CA72543F52383F
-:1004F00080F2A9A3C04EFDA372F49031C8FD59FC4F
-:10050000FBEF3C3F85E24B6AFE2863B6DC8553284F
-:10051000DF445356EF37608A2D17ED850EBDB04B83
-:1005200045392DD55F97156717BD33E75B25B80EA5
-:10053000CEBFF04021CAA5EB0D60B78F20877E9D0E
-:10054000CDE5D045BDA54B023BEDE729FEDB719C17
-:10055000F79217CFB5C3BC16A5551AEC086FE0FB90
-:1005600032CAC574416FFB420E9FBDDA272D8771D9
-:100570003BCCB07EA17FBA5FF1529EBD7FA1740BD0
-:10058000C0DD2171790B9D52695F52EC4EC5FCE5CF
-:1005900006715E5216EB7E46FF5619EDE977DB06D3
-:1005A000662A8531F87E2EE2CB3F2F6077D68DB05C
-:1005B000DF6DCDE2727B81EC9E827CB4411A78AB18
-:1005C000360BDFBBE9FD9C94D672CC3BBE3EB9A591
-:1005D0001CF5CFB0F7A9F0BE24AE6CE4ED1A4C9137
-:1005E0003C3C9FEC4DF6AFCBC2B8D0920F296EF9D0
-:1005F000CDEC774E60DEC13BFA9ED929A85F0AC4D4
-:10060000B97EE1377C6D82EA3734F1F264EE378CE3
-:10061000E6734DE1F964B50BF939C55A91AF30D79E
-:10062000C6CFF5CC2D2FF074008837B18882726F59
-:10063000EE7BBE14DCB7B385FE72DF94D1ED19E614
-:10064000D2BBE3D7EB3C775C19FEDD50AC2DDFE885
-:10065000D1966F9EFEE709F1E53DC9DE1D38EF1F1B
-:100660004B3CFF313083D9689E4E298076C7E41712
-:10067000B3C5F94E9EA7F74F625FF4E27446F519D1
-:10068000FB4D7B31FF5DF533CBA27EB28B99F21D22
-:10069000FCBE00D4571149E4FB392996C25EB8DB91
-:1006A000C6F1076D0D30CE0B4BDCB43E322C3AF662
-:1006B000655C43E526B2432AC69892906F8E09BEC8
-:1006C00053CFEBAA7C58A1301FE62FC0A717E2F347
-:1006D0001DBDED28FA97031F31C6E955A950FEA1AB
-:1006E000F81663ED547E4CF0F7310153E0DB0AADB0
-:1006F000E757AD06A2A7FC13790FEA098CCDA0DF5E
-:10070000F8D2E649049FBA7E6055173A33C8A52D42
-:10071000C655740844B1B02754FE460B08DB8DC1A2
-:10072000FF2C203E27791399C6EF4FF879019727C0
-:1007300091AD0E711E8CC7CB724DD171BD386E5606
-:10074000F43BFCBC51862843554807F3FE4D560147
-:1007500097CB83AFFF81F4B2C5E3C7EF18524C7457
-:100760004E465D37B6CEDFBE553B03E759F40D9AD2
-:10077000E77CAB0DE7590C6CBDC8414F6F1A8DC7B4
-:10078000D78F9CE471E33AF94ACDE1994A1CDF40E6
-:10079000FF46DE3F59DBDF05FD1D71FD53A07FC91C
-:1007A000F0FE4F594D21DD541CA7C21D26791EA213
-:1007B000C9CC17F3923378BFF9221FB43005DAA3FE
-:1007C000BE29D6E66BB0E91E13BFAF439B9F71BD38
-:1007D000B42E0BD7D53C53E36018C67B5DD0ED7AC1
-:1007E0009DFF77783FDDEB8B8B8EE37AAB31051580
-:1007F000DC0FDDC0421B9098172BFD4FD8C7913CF2
-:10080000F80BAE8B26D93FC101E5F3FA9EC2BB0BB4
-:1008100068BD7C96356D38BC2A5FA8F0227F209F8A
-:1008200045F92301EE289D6EEAA744B6DD60F7E0A6
-:1008300053B583186BE1F9C6EEDCD8BC8089E69A23
-:100840005A0AD10E79BD3D4072E37AFB2394D7F466
-:10085000E7317E6736C0B5E8AA4FE85E13E65A3244
-:1008600001ED7B80373D3BFDFF1DBCAABD372CDF72
-:10087000F6238326DF76B475A57EB799F1FB69660A
-:100880000FEEA1FCD9E685160F9E8368C6FCCF72D9
-:100890008A2F911D87E784E99E13C924ECAE2F9A15
-:1008A00097CBD7616FA39BECB7A81C1779E5BDA5C3
-:1008B0001CEEDEBBDDEA3D27DCBE5BC2F83D29EA6B
-:1008C0003D27CB6D54AFE69FF7EEE17EBCDEE72718
-:1008D000D07929B0DFC85E60A93A0E5F81F67E1537
-:1008E000FC933262F9D2DBF4DCDEDCA9F354209E07
-:1008F00077621CE8AFC47FBF9AADF59BA8E544BF03
-:10090000DE930EFFEDC817CB4BBC7912F0CF32034C
-:10091000F7DB017FEDC2B31535ACE529BC3F701E96
-:100920006BF9856E1CF1979FF86BF227FC5EC1187E
-:100930007F2DE1FC1520A1A4F25794AF8A13F3ABED
-:10094000FCABB17DAFBDFF574D68A70E1A892E6A6B
-:100950009E5CE23A8E83E7B49EC3E394658267EDC2
-:1009600048F07C113E8FE7AF4CC6F979347ECF5406
-:1009700058C05A16E3F73DC9FE76843FCAF71BF804
-:100980007E6418DCB285F8E3D6DB649E3F9ECCF52E
-:1009900015C62BB2E0FB75E2FBB776733EBAD56A9B
-:1009A00020BEAB1B6CA47C2256CDE30E1EF81FDFCD
-:1009B000077A09BF8B44BF85CE523DB2ECC25A6D57
-:1009C0007C6291458D7FF8F4B81E6F5DA83F19AF2A
-:1009D000EF17B1CD9F60DEDB228C63A8FDE0BB8FFB
-:1009E0006747E31813308E715CECD32F027F23FF2F
-:1009F000BF9ABE72D7DDC0B7131E2F29437FCE9C8E
-:100A00008C554F6D85F2F7764EA2F2AB1977DCFB71
-:100A10000ED6F71551B91A2F71C1FD4623EF5F5C51
-:100A200071DBFC02F8EE71B31817D715EEFB92FCE0
-:100A3000BD75D0CE35756C19E623560BF970F16E85
-:100A40009E0F7FC355569EE2B9D24D7EA3EA245134
-:100A5000FF753EEE5BA5FF568679A9D563238BE92A
-:100A60003EC6B21F4FC2F271E993C523C54D26178A
-:100A70004BA189809F6A076F5F5BF6FD6CDCC757EF
-:100A800057F1F2644F65F738ACD75D5A3CD2B9D014
-:100A90009F8AF5143DF724D6E98BDE0FE99C93CFAE
-:100AA0002479708ABEE91FF27B892C920DFD8F3E5E
-:100AB0006F81827ED2D95E9EB758656ACFC2FDEF44
-:100AC0004D7E4339E69FDA4CA5C7D1CE489D5E39AD
-:100AD0000DE93BDBC4F4A89780CFFF85F8FC9A4F63
-:100AE000F25290B92C5A3E57F9A84EE5EF6A2D1FE5
-:100AF000C3FAFCD7ECF4CF97AFA3F1317CFFDFB1A1
-:100B0000FFA22F69F54A74BC84F59638FE6872001E
-:100B1000FFE2E55C0C8E7E5A57399815360ED75D8C
-:100B20008FBAEE220887413744E73EF225CF243AB8
-:100B3000F0388AFE57E1CB05D9C6CA86C3857F8ABD
-:100B40006A9771086CB60CFC2EAF877E5EE688C192
-:100B500005DF676350EF6FE0F0EC965AB8DC107673
-:100B6000B1BA3F6E52E73BA09D6F45123FEFEC429A
-:100B7000FF05F673964EFA6B70370BBDB9D0E47B68
-:100B8000C80873B8C5BE8CF8E1AB2CF03CDA27C6B8
-:100B900054BF634C3AEEBB0247C205E4CFA5BC018B
-:100BA000A077DA9838FB44852B111F4DA3C8C344A6
-:100BB000B813F110A3CF10D957EAF9A9E8BC12E68F
-:100BC000D361E5EB3532CDA8DE5F528CEBE26D6987
-:100BD0009227DE9E7E3B416F27C2A5DA11AA5E55A1
-:100BE000E1417F11FF7EA41DCF90DD38662CD99D99
-:100BF0002ADF640AB80C3A69C438EA8D6374AA7FA4
-:100C00004E43C7C4734E2ABED4BCA0443CA9793D10
-:100C1000C3E23509F1C8D1DA49603F8F710CC79F33
-:100C20001AEF7144FD5C029FA512C93F87F073CD96
-:100C3000F6F0F309B5ADFC9C7C6D0D4C0070FFB671
-:100C4000F01FA8787EC8EEBF8DF347781AEED3BFA9
-:100C50003BEF698A73A8F7C825E267F928F8198D70
-:100C6000CF47833F2DD5B712BF7B5E1AAAC0CA2DCE
-:100C7000E9E2FE41E62FC07560B71554A21F02E4F9
-:100C8000EA679FE1660EAB80AEE50E7F33F2F9575F
-:100C9000996F0ED2D751E3D773FF3A23FFED5AB1C4
-:100CA000DF9A23F4EDA55D32C507AABD131F9B850E
-:100CB00076E21B7A16A4F5EE25FDB946C07F099FA2
-:100CC000D8DEC2F5EECA377F54012B864DD8AE8BE5
-:100CD000DDAF00FF26069334F72B4CDEEFD094A750
-:100CE000F4676BDA5F353056535F1A9AA4A9BFFADE
-:100CF0008D324D79DAD04C4DFB6BDEABD2946784EC
-:100D0000E76BDA7FE9EC024DF9DAC8ED9AF6A7C491
-:100D1000BE9805BC43C51978BF389FEF759F2ED587
-:100D2000F4FB6DCADC37900FEFDACCF3972B01336D
-:100D30009A7B267AB85DD102FFE374F52988AF1556
-:100D4000606F63DEF2CAED5ABBA37E70EB0694A51A
-:100D5000897915AB594B155E49979857516D5BA230
-:100D600043BEFBA731C2EEB8865D23EE85F9AB74B6
-:100D70002D62E3FF5B7435BAB47435BBB5744D2E88
-:100D8000D6D2D5EAD1D23575BA96AE76AF96AE69DF
-:100D9000355ABAA6FBB474CD5CA4A56B965F4BD74D
-:100DA00031F55ABAE6B668E99ADFAAA55F4160B59F
-:100DB000965E09F456E5E5B8AEB59A7651BAFBEA07
-:100DC000291F667CCFFD9A7155BA07E07F9CEE2DF6
-:100DD00094AFFEB7D29DB120F95F13E97E3681DE74
-:100DE000A0AF3E42B90076C6397C2E9A20EC79DF5E
-:100DF000C876862A7FE2F57AFCBE7534B9344C8F0A
-:100E0000897DECA87A2C611FFB3E66F1907DB49938
-:100E1000FC3CB709FEBC8CAF66A01FF507A49FDFA2
-:100E20000740A6035CEF23DCF09DF79326939FE138
-:100E30000E16D2D3BDBF98890883DE8989C932DEF8
-:100E4000E7E3A6E732A1BF970B3F8437D99F92C350
-:100E5000FD0FF919F8DD9C217EFFF25B695FE89ECA
-:100E60008293E887079D721AFDF0F0BC60E6FC7083
-:100E700046950F5EE676C6E16DE96C89F4323A7C00
-:100E8000703FBBF4AB12C51996FE9E3FC7E770BB1F
-:100E900037F1D9D1AAE28DEF876EC87193FECD618B
-:100EA000FDC27E637ECB381A87FBCD9FE4F78F3E71
-:100EB0002B3165BA838E49111D334D1CAE67F5CCBD
-:100EC00084F87B86F9DD8897EF28209A789EFE24A7
-:100ED000E487A5BF7F672CFAB164D97513DE2F3D77
-:100EE0001DBF0770CCF95A8B847EDD4C578B847EF6
-:100EF000A361EF0FDD2FE1F9C26899F176F88778E9
-:100F000050FD73C53A1EA78EDCCDF7174F7D9D911E
-:100F1000DFA9A3355019C0F8940C0607E6B1E8F92B
-:100F200079E41B72B8DF2D8B0DD1BDA6EC356117AE
-:100F30008AFBE04B44DEFB0511E759B1C7C4304FD3
-:100F4000A2E4E05107C67556002D87509F297EBA4E
-:100F50005FA364C7AB0E7ECFB8DE8EE7D8543D3AB0
-:100F60003ABD1576262E7F1CE8D832921E5F93CBB1
-:100F7000E3B31D6D35B3302EA3C2F3609B7716F239
-:100F800087AC7818C693F0DE9DF8FC338313EAE350
-:100F9000D6AF62A9D194F5161F5D66B1A1AD85F8F3
-:100FA0004C2FEE07DA98B3D616FFBB01AB7374E291
-:100FB0001EF200433B9B8B7A7C2A67503EFC91F1EA
-:100FC0007DA8D105E3C4CBB57BF358BC5FB9ABCDED
-:100FD00047F06E90FC7E1CC458C842E614CC5BC03F
-:100FE000B397F07EC7F56F601E8DC1BAD613728FAE
-:100FF0008E37A34BB9122F971EC801B9941C934B7F
-:10100000DF6D3B4B78EA685B44DF037C318C9F05E6
-:10101000B2B87DDAD1B684DEEBC0CE427E7A65C747
-:1010200084A36EA83F01FFF09E1CA393C3C5CAF31F
-:10103000483F2D167C803EAB5CE09F13AD7AE2B357
-:101040007B722D415C84F7BC3DFE28DEF369005EB7
-:1010500092FF06B8A3DF11783208B904FCE4C3F5A7
-:1010600066C856C8FFEBB02D203AFD77C753F16B29
-:101070003033BA87C6906B21BFCD1785F37B390912
-:101080007ABE3C8FE4E83D022FAFECE0794727EED3
-:101090006564BFDE731FF7BFDDD3C828FF9BB5C2F1
-:1010A0005F458C6F54799D8E3781C0CB9E3610344E
-:1010B000458C3DDC66C293572C19FD64E36274ECE9
-:1010C000F12A7674C76FAD76D6E1F3E1E9A77B50DC
-:1010D000AC6C99F5BB217CA28F1BBF6F6B6141B4D7
-:1010E0003329160BDFB7D74319BE9F22EA53FCBC46
-:1010F0009C2AEA5317F172AEF739A91A014B88837B
-:10110000E45A1CF30A51EEDDC5F8B95B71EE7EB707
-:1011100090BB632C8EBA6AACFF1AA37C7CB5FE71BF
-:10112000519F6539D9350EE5F2426DFF1D020F99C9
-:1011300096933DB3295EA2AD57E31BE9964B6F50E2
-:10114000FF126DFDA3A2BFD572696836D6176ABFBC
-:10115000FF90A84FB67079C87CFCFE54B5FE3BA248
-:10116000DE8CF5F87D8FB6BE5B7CBF430A127DE84E
-:101170008E585C3FE9DC5FDAD7C6AEC5F5D3D3162F
-:10118000A175F470DBA7442709992C3DB6AE6CAD70
-:101190006CC4F3E092906729EEB0D73B82BC53EB6E
-:1011A0001D367EDE5D7619888F8C16212FC43A8C11
-:1011B000CA0BA9C5C3998BFBB13F8F9F61815D416C
-:1011C000FB220FFE909F73EED5317F9CDCCA6E48E8
-:1011D00062FEB8F6AEBB1C9A72C6D7B235ED9D0B57
-:1011E000C76AEA2DE59334F5CC9B4BEB65ADE0ABDC
-:1011F000A492324DBD7A0E9FF5E46AEC677DE14C16
-:101200004DBB4BC56EFAFD9033F3D4DF19F1985006
-:101210002EACB58ECD44BDF34CDB7434B2D9B3B033
-:101220009EF0E8D4013BCF2F3E807159B4D7DBBC90
-:10123000F47E1FD483E5C29E84F5E686F67BDA6CE5
-:10124000547EA2CD45CFDD6D6E7A3EDE564CF53B29
-:10125000DA3C547E0CC6C7E7A3300EBE7FA4AD8631
-:10126000CA5BDB7C54DED2B688CA0FB5F9E9F99DBA
-:10127000B67A7ADFDDD642E58D6DADF47CB02D40D7
-:10128000CF8EB62EAABF46D0FB8038C778A0929FDB
-:101290004B4EA4E3AC5C49732F9835963F302B1727
-:1012A000F307FAC39AFBDD71DE349E99CF3F71BC20
-:1012B0003A1C0FBE3B890DB527F3754C71C7F1037E
-:1012C0009EF5C9C0EF635A381D0A0622549F55CFB8
-:1012D000695127E065CE00CBA9E0C750B1DD0569B3
-:1012E000A82A99C76129BF8CB9609E15E27E1C624D
-:1012F000BBA00EE152A673BDA9D2353A6F3B87134E
-:10130000E73F12BC5F13F397CBFBF9FD17353D2187
-:1013100064FB246F0BDD7F615AE40BE1EF57387DEE
-:101320007E3A8F3FE9D3B9B0B90139F3E997991BF8
-:101330009E390DDA7D4FF65D659AFD85FCE9C3CCDB
-:101340007D358C5BA2DD9F2415AED5F433E5DCAF93
-:10135000A93738D76BEA97AE29D8E0427C8E611462
-:101360009F316E6E6718525CDEBB95E0DA24F07E2A
-:101370004172D379DEC041353ECFEDF3EF09BDC2F6
-:101380004C9B693D4CB0F362516A40877AE1DC8F37
-:1013900052491E3DFD842E88FED7892CA8C3F53FF7
-:1013A00019CC3DAC9F8237E8CA74A58A8CE552E619
-:1013B00096B17C358BD0FE04ECF3F5B9DC3E7FC2F0
-:1013C0008CF1C15CFFF778DE5288F46691A06791DA
-:1013D000BA1FD9AE24FA65BB72890FB5E7993A8571
-:1013E0009DDE6EAFC8C4B8E88551F2CAACAE993381
-:1013F000F177B4AC59D3E9A9BE7FC8AD1BF19CEE1F
-:10140000E3025F2ADF4F0426177CFF38CEE37CF926
-:10141000BB19B8DD6B2A8C10FF5F90BCAE2588D756
-:101420003765CE878359342F45E0553958E95A023C
-:10143000F853DE1EE709B0D8779E6EF3CE54945869
-:10144000B948E445EE6FAB9B591DF7FE75014F316E
-:101450001BAA41FD545CA2F304696497467E990B74
-:101460007BBC78CE5C29631E146F1359CF7AD4D518
-:10147000CA5F64CA73518ECD606ED817582C21860E
-:101480007941AF47E7C934BFAFF43B5B752ADD173D
-:10149000981D957BA813F1F79486907F7ED7ABE7D4
-:1014A000F33AA6AD2FB6F0FC9D15C586A05BC2B081
-:1014B0007A0FDD8BA7F4490C4D7FE52FB3090FECB4
-:1014C0008564E2BFE4ED53E94AED9B14FF0F91BE42
-:1014D000E743EE1774E3042F42BBC6C986BD688F8D
-:1014E0004D40BCE0840A8B09AFCBC57CF7B72D21FA
-:1014F0003CFD5ACCA33337011EE6F1E2BD912B7AB5
-:1015000055FF87769E0F9557DD8CF7EC750CC9C299
-:1015100056D2E273937E682AFE36DDF930C0251379
-:101520009CBF46FACBDB2BE8F7954081D0FC1A9F95
-:1015300080FD7E01C9A31AD2DBD374949F9AC85749
-:10154000A7841C6BC9E5797F56D79767E2EFBCC5C6
-:10155000CAB3883F9FD1B162CA2FD1F1FDA59ABF0E
-:101560000186831BF775A579BAE83D1AF3515FDB55
-:101570007594F727EF49A2F389B25DA13CE34E4B86
-:10158000B56D358E635328AE32579E358476B3D110
-:10159000AEBB1AEDEEE37BEF1FC2FC12395761E8D8
-:1015A0002FEAB429DCEEC8D1513E9662AF36611CF9
-:1015B000A6C872BA12F17974CF37C9BF217F43E44C
-:1015C00088087F925E90AC93B5D0F8811C45DCE72B
-:1015D000E1AD2DCD10210437EE7F6A3E423FCA7146
-:1015E000DB2533DA2B6ECB0AF2A715E615D07CF497
-:1015F000186F83F213EB2ED9516EBDB96783A30028
-:10160000EDE7A0423648F19F3BB2E9DCF91E039DAD
-:101610008B57F19A1F503471BBDC566DD99810BFAF
-:10162000D3279C4BCACA2B107A6E110BC5CD47EF3E
-:10163000E2FB35E6B4D07EA7304F629FE962E53128
-:10164000A2BC5F1FC8F6007E8EED59918FF3BA726F
-:10165000D84F79BEA3D9FB1FE7BAD5DF4332EBE8F9
-:101660007ED59019F37E9F6A63E968DF99820AE567
-:101670005DEF13F2ACD0C2F9DF90CFF93CF159D84D
-:10168000C3D79D722029988C74B3F59705804F2697
-:10169000BF328FB941FF15DABCE43F2C6C35A4632F
-:1016A000FEC0DC1F5A884F2E5992C84FA8B4267925
-:1016B000F07DC7DE8A62771CDCC1365B3AE6E5EC7A
-:1016C0006D33A5A39C0A8E225FC7D97594AFECD663
-:1016D000F17CBAF9791CAEF979FCBE9779A2FCA429
-:1016E000125880703E09F4C43CE9A39BB93DBCB6D6
-:1016F000DD4470AC7D731CD955A3E1EDE936573A52
-:10170000DE0FBF77B32E1BFD4795DD859BF09E84D2
-:10171000B5567E4FAC9C3AE9314C45673FD533B462
-:10172000DF3B52667A96C5C97739755631F2952CEA
-:1017300007B2D12F7267DEFC9B315F12E8B713CB83
-:101740002BFB4A79D91AC8C6FCCAE6BE69BC9C1EE6
-:10175000D889F995DFEA9BC1CBB9816CFC1DA9B68C
-:10176000BE6B79797C60279637F655F232FA9E4047
-:10177000766EE99B7333CAD90E83A71E05F20F005C
-:10178000FE1280BF5F3CB70ABCA8F5CFE17BC0F377
-:1017900021F14CAC7F41F41B18A5FE25513F38CAFE
-:1017A000F82F8B7EA151FA1F13FD8E8FD2FF35D1FA
-:1017B000EF8D51EA7F22EADF1A65FC9F897E43A301
-:1017C000F47F57F4FBC528FD7F29FABD374AFD0792
-:1017D000A2FED709E39F10EDC3E2FD58EBE60F42EE
-:1017E000C07763418EA05C2AB66E76E03ADFDB55A7
-:1017F0004EFCDF51C1E33B2ABF8FC5DF6F827A5DAC
-:101800003EBF4F4A97CFE33CCF88F1810FB720DF2F
-:10181000AD7D5BA63C9B0E9DE76C10E5E8261DD9CF
-:10182000036BDFE4FBF3B5DD4A30FEFCC53309F0A2
-:101830006F10F0750A789FCCE3F139A3CB955E1B4E
-:10184000EF47B269CB9896857217E437E5ED1677C6
-:1018500057751597638C4C471688D2680AE17D0D41
-:101860008A55E8055B794F31C26751E89CBA6257E7
-:1018700042FBB1BFAB9CEC3B15BE4E8B42F775C92A
-:1018800056AE07E6FE70960DEDAC4EE61FF2627F97
-:101890009742F6FBD1AE321BCA3D83F52E1BAEDF5D
-:1018A00076379F5775537112CA6BF9211DC9EFE343
-:1018B00036BEDEFB5C3AF25B805EA1F32C20AF3DCE
-:1018C000A82326B0503B9D8F78F88525DCAFC7ACA8
-:1018D000A515745E448D434B4A9CFD7F59E0275FFC
-:1018E000E81105F50B3C9F2C17E71C02DCFF046494
-:1018F000738D893BAF79394FE6E740D438A25C4B12
-:10190000F716E5AD5334FEF79C7BB5654382DE5098
-:1019100012F4CAB82E9093717AA72060D3944FE640
-:1019200009BF8E8779D07E9DFBC3CD240F2FA17E6A
-:101930009346977B51F92BE4F193E21E9E2703FC1B
-:101940001CF1D1CD653F417AAFEDD6D1BDD35F5407
-:101950008E3E93C7B87FDA0F7A07ED198565E37E6F
-:10196000E9F3F0305EEF73D0BD0A9F838FF18F965D
-:101970003B50DE8EF72BA47786E98DCFC1D7B3928B
-:10198000E73D3FD2D19EC4ED6A1B9F77678693DF08
-:101990004724CE1FCAC25E7B50F8C195D4B96EFCF5
-:1019A00089904E7B0B9537489ECC1BA0FD46C96F96
-:1019B000C3F21B8E24AE777293880FF7A32D43F7E3
-:1019C0001C16F8D03FD21F34A8F71486F0FF0E6221
-:1019D0007E8E7A0FA28BEC33710F63EFCDD5D85E7C
-:1019E000B14D469373DA138F6DD1830D7AD0C0A2B7
-:1019F000EDF13CD533C775E29EC4DD5BD05E3D980A
-:101A0000C434F7401E443F3A8D17DC82F73EC2F7DC
-:101A10006E90610F767DFEF7B658B262F054B90F42
-:101A20006C69A73C59BE2FB1337E4FF779773805E3
-:101A3000970BEC4FAECAC77DF99ED3199ADF5D13A1
-:101A4000ED5345FBA6C148D30137B59F960FEBA0D8
-:101A50007120925242EB2B5211DF3E45ECF7E3DA54
-:101A60007F89C61FA57DB10ACF81776F2DE1ED2B50
-:101A700071FC0BEE7006E5BC24C093367CFCEBFFDA
-:101A80001A3C9344FBF3A177A9FD0516CE9852406A
-:101A9000FD6EC27E17DF7AB742CC3B03ED64908ABD
-:101AA00037E37B34B7F8EFB1B490FDDC6FEAB1A156
-:101AB000BD66D6F7F850EE16E2BD4ED363CF05F9FA
-:101AC00085DCAE4A78DF6F6269B5C88FAD3ADABFA0
-:101AD000F49B86CA4AD09E7ED102320FF5C23A0FDD
-:101AE000CAC181F05A4F09B4EBCB9945FB8A838672
-:101AF000967E3ADFBBC442E74FFB6C3D365C3F66E7
-:101B00007B8F0DE308F27DDC7E52965AFC4F213F1D
-:101B100085D6162F8F5BBF556E3DC1DFFDAA65339D
-:101B2000EE03BAF59E9E0968675B15CA3F57960E8D
-:101B3000CEA7F3823FD03192EF30AF2A287736EA32
-:101B4000E8BEFA87DD4BEF413C30C5E7AB827E79DA
-:101B5000E98A84E72F1E547C268C5F1885DDD6E742
-:101B6000E1BFF7AA7E7787B02F77E4F37BABBA9714
-:101B70001C287E0DFAF5B5AEEDC7EF99279A18E649
-:101B800099F5E59CE9C6F3A28FBB60C70B78B0342A
-:101B9000E8E8F75A1EAF8536A9E8CF3068FC15CFC4
-:101BA0004AFDD43ED0A8A37D82A5C4A0F16FA43580
-:101BB000E8BCE8773CE0F66F427EBBFA6DE506FCD8
-:101BC0009E6BBC6243FDF490EB17261DC09952AE8C
-:101BD0001DD7364B3B8EA35A5BEFACD5D6672CD4C2
-:101BE000D6BBBE6648F0D768CB29C8478847900166
-:101BF00016D04349BC8A2559AED0EF8575FB77F5E1
-:101C00004C8036C6E440E96B006FD2A424DAEF6F53
-:101C10007C3509171FC81F467267E3144679AFC7A2
-:101C200072BFE9427D9A889FBE1C03CDD75208F847
-:101C30002CC0FDFA59FA5D2F0B8B6B5780F8F13EE3
-:101C400093CFF7EFCC5581FE394672F059D57F7CA2
-:101C50000B3F4FD5D7CAFDD20F2DE2798134830ACD
-:101C60005CDFBC7D0AFECED854F4DB77DD8DF98EC7
-:101C70008978CDC4FC3239C61F1BD4F32B787AB2D5
-:101C8000828B655C7797DCFCFECD9705DF1C14F733
-:101C90002D44DB23FE3218DFCAC2786FE6ABFE07A5
-:101CA0007E1E609B1A8F1165BCC610CB078F3B6EE2
-:101CB000C0F5B46DA1A30CD7D3466197A5E618BCB7
-:101CC0001301DE47DE3004A4ABA0ACB0E37AD0E76A
-:101CD000071DFCBB86379302789EEA1157399DCFCA
-:101CE000FA389FFBF39EABF4FCBC96D6A342E7DF29
-:101CF0001E717ACC65DCDEC0BBAE19A51681697198
-:101D0000B4B68CF6A98F783D665CAF8FE478CC983A
-:101D10009F6CCE526CB88E1D2E85EED17AC4E4B77E
-:101D2000A1DDE2000588BF1F67C8ED9947E7920073
-:101D300087BA0A1E1260228F0FF3E8D204BEFA5C43
-:101D400077D9F0FCBAB3F0D0B7D0AF9E86E3A5F058
-:101D50007E8827BBC0D3A57C37CF4B16E3A7DDF524
-:101D60001CB5C7BFCE8AB8F13C9CBF0CF358907E1F
-:101D7000074D7C5F1D273A3EF392DF7EC34F38DE6E
-:101D8000DA73F9FD4186358CF661CF55FAF71F45B8
-:101D9000FC6425D13E3BDB955D85FC91FDC6CE05FF
-:101DA000780E61C34FB8FE342CE7F1A66C8599BE5E
-:101DB0008CF34EF7DB108F89EB30EB784F1D32DB65
-:101DC000FF054658D4C60080000000001F8B0800A5
-:101DD00000000000000BD57D0B7C94C5D5F73C7B43
-:101DE000CB26D9249B0B212124ECE646201736E193
-:101DF0002222EA7209A222DDC81D233E210102240B
-:101E00001040FB46CB6B161214156BA8A86851370F
-:101E10000A142B6AA88058D177B968A95A4DABBE6D
-:101E2000A55A692254416E31B4EF4B5B3FFBCDFFA5
-:101E3000CC4CB2CF9228EDFBF6F7FBBEF86B87795E
-:101E4000E676E69C3367CE9C7366765702BBCDE799
-:101E5000602C61A28DB9EC8CFEFECEFF976A61EB1F
-:101E6000CD098C254DE1DFF342BEA7248DCF2D6235
-:101E70002C79BAB17E0A0BC9BB79BD239D77B058C6
-:101E8000C6065419EB3D197DAC9899900BF96EFE7E
-:101E9000EE7C93D67EDFE0118CF9532D9E6D2EC61D
-:101EA000D2C3C663EC9B08E4356672FD3D8BB1F18D
-:101EB000AE78C6FAE17B9DCB57C8D82E9B738223A0
-:101EC00089B1CE15CCF30C6F3FFE950D73DFE1F9B0
-:101ED000FF4A77382378ADB423CD6D05FC3BDBA7F3
-:101EE0000F46FD2D16FDE9685EBEE5687FE6D71852
-:101EF0008B886675AD1C4F3613D391FE1D7FD7625C
-:101F00001C2B8D33DEC527359231DE45C094F2CFD0
-:101F1000A7AD0307E63B3DE8CFDD66E7FDB65A9C7B
-:101F2000F9169E1FF9F4630F59D3310F0EE3189A77
-:101F3000B6978D66ECF9C37CDC013CE77FF2A189A2
-:101F4000165E1ED55DEE47F92E9349E4FD81872686
-:101F50008E656CE0E1D6350E2763654FEF78C8CE0D
-:101F6000F116F92B51EEE379BF0578A919D4CEE724
-:101F700077306309CDBFF177112C82D72B347B36B4
-:101F800023CF3E8964DB787EC79EB1B35DBC5E63C0
-:101F9000CC28975EC0D8349746F32F43DAEFD27936
-:101FA000996D1EDDE3B8F4FB8D126F8C798EB670DF
-:101FB000FA163E6B63F7F3C23CC00D7AB544069E39
-:101FC000017D9B1FE34CC7589553D0BC6AEFFD19A8
-:101FD0000778FA6A4C59A58BB7AF8A99980C78D2D2
-:101FE0002E32A62772BA35D899CE719596F4338DD4
-:101FF00071F806261D1EC71CE09BB6354EA4755110
-:102000004C0FE1CBB48B16A60F477F5EEA0F7FF62D
-:102010006470A1F86B4AD0D91A0E8F9FE37A1BB86F
-:10202000D319D5A11581F1277ADBD5FAC8049FB25F
-:10203000D9AD05E03A81071BC7A9B584A70E4B307F
-:10204000A297FA77C87A66BB23681EC653E75B4738
-:10205000A95F87E54CBBBDA79E3D60217CB01A16E9
-:10206000C8D1084FFE08E4E31228CFBC5E575232B5
-:10207000F89F1172D32CEC70041F97B897AF9F5440
-:1020800016A4F4498E1E47162AA5C77F1ECDF089D7
-:10209000818F9F616C72285FABD434C844F065D7E0
-:1020A0009BFA9DE0F8C93F14497058D6B340241FED
-:1020B0002C1BF4E074CBDEC0021637EAD9FA9D4837
-:1020C000443B97E403A789D178AD43B1AE36BFE571
-:1020D000D8C0E288BE24773647B16AE04B8DC7D8B6
-:1020E0001AE28780E48B2D0D4EA2A32A1F5873306D
-:1020F0008C8E09063AAA7A691707103D7BFA0D50B3
-:102100007F69F5BB891FD22E66483E717D47FF99D6
-:102110007DF49F42EDFBEE7F208DFF64F0C3F8A9B4
-:102120001C153FEEDC1DEFE369A4B5D9E7E905CF47
-:1021300069B71BE5E4B07D46B9ABF01269F52695A9
-:1021400071FC47DE61F2B4F0FEAE386AAC37D9FDFF
-:10215000513CD6634FFD60D234D4AF15F5AF3A6928
-:10216000ACEF1BB727ACBE80EFDA8BC67AE1F4097F
-:102170008797C3D56F46085C13EC1186F6B32B2EF8
-:1021800081ABDFAC10B8AE4B31D6D7D7F40ED78DBC
-:102190007911DF0A97AAF7BDD197572F7C1ED32656
-:1021A00047F48177517FD6ECCBEBF796EA6FAF77A8
-:1021B0005B7DF8387EB95FF1B5C5D77122FEC19756
-:1021C0004062BDC91BC9F75127EB6458475D725D7A
-:1021D000253027AD67BEF035ACAB0FF0CF54C686C7
-:1021E000B87D5F437E4DB07BCB1FE15527CAFD8A8A
-:1021F0004DE13D5E89CE7D8537175ECA7F8CAD256A
-:10220000B85ED3749DD13E6BF76CE3EB3B3F8DD949
-:1022100053B91EC052029937C73016ED56F29A8B49
-:102220001A0EE75089BB1706B4AE8CA7751E48007E
-:102230003CFFE8B8FDDDDE0477BF9EFAE1F57AEAFF
-:102240000B3CD96CAD2B006767ADC383FDE1431434
-:10225000F176CFCE8C089A39BECE5B1DEB352E675A
-:102260008E46CF7BAB1FC7C307B1BA0BFDCF9E75A0
-:10227000FD3DC86B07135D2B397CE72BDA4701AFB7
-:10228000DE683DDBCDE1A8B1EB8392F914CFA6EB7C
-:1022900083E3805F5F22E195FFA3D0D72BFC029EF2
-:1022A000899AC07F629C5E8871269ADA9EF2E19BD1
-:1022B000A56D14DA31673F82EFAC8DCBBB5ED6BF24
-:1022C000C2C378D9CF01ABE7EB4E3EBF031BE33C63
-:1022D0008D1CDEAAC459F396F3A205265F72D06C5A
-:1022E00080FB2A8C57E3A818940AB8AD126E7B3F86
-:1022F00089776FF6B7C1DD88F1B0AFFDBB16D8E6C0
-:1023000016B444FE157F7CE07E9E8F305DF810F29F
-:10231000A3B3D0E4E17B04DBC2F50B3BDF57DE97D0
-:10232000F87E92AB3FF604FABE1EDF53A244FB9444
-:10233000474D8146DEDE37FE55A2D3B3CB1C1E339C
-:102340001FAB82B96CE0DB4AE6B501FE3F8EFBDBDA
-:10235000EBED7C7E73DCFA74CCE3B64453C68704A1
-:10236000879E5FC6F98D8D15F8FF2E7E606C838980
-:102370008D62EC66A91F2C90789CC6BC568C33836A
-:10238000E9568CFB9B73362FF4D2DF4007E5F0CE85
-:10239000627EFA3E870528BD8505A9FEADAC9DF29B
-:1023A000BF8E2E4AAFE7F0953D363807EB3104EF8C
-:1023B0004B24BFDC9624F8E58BFEC0FBA67E97C5B8
-:1023C000BF659AC0DF10B7BECA4DEBD595E4014C8E
-:1023D000CE09037D3121EB67623FC17F1667CEB71F
-:1023E000AD9FB6AED822368CE4812395E3E13A491D
-:1023F000CAEBBC4BA760BE902058AFDF93EBB5D4BF
-:10240000EC60499C2E6D2E732082C33279DC8A14D5
-:10241000CCF7176BD8AF8673FAFD629C9935524D95
-:102420002FB59B2AFB9B3A70D229E827EFB260D2E6
-:1024300008DEAEF4A27E388EE367AA796713D7B8B8
-:10244000D9E481D6CFDA43E4DAF549BB2C8CEB2F03
-:1024500037641BBF4F29E0F910B93B95597ACA3947
-:10246000FD0F003F903BACD90CFE7DCC1D93047D4D
-:10247000850D6543C5F9805323643E5DF66F6CE7B7
-:1024800079BBB7DDFA53E0A395F1E7E691DE611180
-:10249000F359F69E99F4CACF1A18388F9DE0FAA125
-:1024A0003797B1CFB97E81FCC986144ABFE4FA00E0
-:1024B000D2330D79547EAEC143F9AFDCBE9F804E5E
-:1024C000F3D77F65C1BE746FA4C2B7806395E4BBC8
-:1024D0007BD3473DF6578ED77BDFE50B83C353DDB8
-:1024E000DA3C0960AF4AFF6C2DF4E755CF691ED482
-:1024F0005BBADF6B737078161CD6EF019917BDDBE2
-:102500003E1562A216FA2BD71BEEB3FAF660BC9109
-:102510001F9D48D67905EFFE8EB71279FD2F1A461A
-:10252000135CA71ABC04D7E986C9944665FA5E43D2
-:102530007D2FFBCA86FA37EDECB0A4F1FAA55ECD8B
-:102540008BF5788D9705021C9ECD5621DF3773F9E8
-:102550008EF539AEF0E6276F6790BFFA9B683F2390
-:10256000A1B234917F9F3ABAC2827AB3BEE632CD2D
-:10257000DDC387DFBD0E053E6A255DCEBEA1119E7F
-:10258000CEEECDFFDE55BCBF378E989999C3D57579
-:10259000D14470751D8D0A406955F556EE31933E54
-:1025A000B932DD1600FE56EEC9EF0F7DEA34A71BE7
-:1025B000CBED19EFF40BFFE6D243E4E8E984D6FF54
-:1025C000FA1872EA5321A7B8BEF9F913906303070A
-:1025D0007840F77356AE9703D1AC2E1AFBD8329BD6
-:1025E0005C5F5CCE207F3A4A9C8347BD98361EEBE9
-:1025F00005E3B96C3D7228F7C5C7327FE0EA196F71
-:1026000047EB828F9FE0F9B30193DFCAF799B3AC30
-:10261000F5DCCF2147B73A3C381FDCAB7178B08F7F
-:102620006E1B40F93CCD12554FFC1CA0F59AA7B982
-:102630002CF55CFED4FCECF101E0A7D7380E46F394
-:10264000F2D73646937C7ACDEA39568FFE9E14FD3A
-:10265000FDE487777EB60FE983B5257702C999092E
-:1026600084EFAA1F2D1E8AF67C9F66A9BCBFE75F78
-:10267000D182917C7D166E3AB03695C3376C4B870C
-:1026800069004F8BB76A8D48F3D36F3862E6E5F681
-:102690004C17C1317CA7DB9C86653520F0F1B5B4C1
-:1026A0007F1BF7F5824D5F8DC7F152EDEF43B5D635
-:1026B0002F5B701ECE385AA213FE9AA99F3DFBA72E
-:1026C0007D700BC33CB8E600B82B6C1EDA4F02FEDF
-:1026D00016D0F9AC9EE7B91F6BDAE77F1CF43DAB6F
-:1026E000277BB0BFEC35F963C7A0FE310BCDF39566
-:1026F000ADBF8EB5F27CDC6E2B8BE4E5B5C59D934A
-:1027000050BF36DD45E7F0F4A7AE9B0CFC2CDBBDDB
-:10271000A785FAA9B17B34ACB33D17DE4AC379E88B
-:102720007AE6C901DFED16F907267A3DE0B7EA96A9
-:102730003F8B7C9B8FF23EB3DF6D41FD4AA1E73CAE
-:1027400026F731D65E44F28E58D9D543AF0778319B
-:10275000CA37BBFDA9758E9EFD8FEF5BF999BC3C16
-:10276000D526DB3BA765F8FE817DCB26F721D5DF9B
-:102770006336E68FE4FDA4F3EF1AF6559BD86FB7E6
-:1027800071F9027E51FB2D1FF7AA4CD1DE0B39994E
-:10279000C637D7623E9FB4C72202B4A75FE6F84AA5
-:1027A0004F5A1E25E499D23F662736BEDECEF1FA97
-:1027B000A758FD3ACC6F81DCAF99C59382F91D8F84
-:1027C000F54EC6F835F6CE0CCC81EF8753905F6698
-:1027D000E6FA535688FE64BFBCFD3022CE7B33DA66
-:1027E0005F6EFDB151BDCBDFB15DA349FEBE2EE5ED
-:1027F000EFAA3F9B5831CFAF7A2482E409ED69BD3F
-:10280000E0E575BEDE752E5FFE0376039E5EFDA7D6
-:1028100076339D3F0E9B6ADEE2FB290D9D89FFEB1F
-:102820006C8C1B41792FC87CCD9F4CBD9E0F55CA27
-:10283000E954877979BF36DA1BAEFDDA69A3FE1D4C
-:102840000997355F731FF335C78AF9EEC77C39EDF9
-:10285000567D5542F272FF65CE333DC2BB06F40D84
-:102860009F0787FB5E7C0F87BB9BBF3B2F0FEE3B19
-:1028700034E637619D7D650B609DEDE76062DDEEBE
-:102880005F5C10C07ADE6B13797FAC8DF4CFFD31C5
-:10289000CC0FF9B1BF2C39E077430E32A19FF6631C
-:1028A000A23C52B69F934CED074470FEE779764BFD
-:1028B00094ECBFEE9D4294AF49F37008B87E1B586C
-:1028C0009F49FAAD99EC8647A5BCDE141FBCC5CC68
-:1028D000BF6FFA2A97619CA32C98B61CF5AAA3484F
-:1028E0000E6D8AF7A626703CEEFDC64CFBC2A662B2
-:1028F0009E77909C26FBCEA6326F6A3CCFCF957414
-:10290000D9D412D8F628FA2BCBF3F8F93803CCAC8B
-:102910008EEAB9453F1F5B45BBDF49BAF0754CEB0A
-:10292000FC83CCF941E0599F1A6D815D84633C556D
-:10293000E3F03F5195C3485E4ABBD76C4983B93D2C
-:102940007CE0B58F825E2BFEE62CD81609793CA37D
-:102950003A92EC5247ABD7C6B8F87833747330026A
-:10296000FADFF45283DDE9834C2F8DCB0F16F29CF6
-:1029700010AC041EDFE8B433C8E5BEE859DB3A2EDC
-:10298000F144083F54DB84FC3829F5A15763F4F780
-:10299000C0EFCBF75D9F782244DFAB5A509A4B765D
-:1029A000DFAACB3BDF35824EC368BDFA4DE08FD640
-:1029B00048A2FFE49BED44EF2E87E919D8256F93D9
-:1029C000F2AA110761FEBD714F44602DFFB63C2293
-:1029D0003813F28AD3FFB9EDA0EBEB9144FF1A9BB9
-:1029E000E0A79A9FE7137FEDB579DDEBD0FF1B11D0
-:1029F00044F79A58571C95BF9DC824FF91DE501389
-:102A000015CC8DE7F85C1FAD9F02DE38DF913DB835
-:102A1000C626BE1F937C758CF70138FC7531C48FB8
-:102A20004CE6F51F24D2798AEBA3C4BFFA43F9948C
-:102A3000D76DDED405581F2BA309BE63D29E76AC9A
-:102A4000269EF8BBFCA1A5EF324ECF63BEEDF7E5A5
-:102A5000F27AC7F65B3DD8977E5F6F0EDA385DCFAE
-:102A6000AD3E3E6A33CFB7AFFD24430FB1A395AF60
-:102A7000AD9D8276E54B564FC57ED917BECB6B22F6
-:102A8000B8CCEDA1535296D79CC5F1EFC9D26D5980
-:102A90007C9ECB0BDA1742EE9DB3B53D85F3C1C7E3
-:102AA000717A24BE9F7FF58BED240F2D9DB9D0CF79
-:102AB0009759381F802FE5FEB95CF2E54B597A1C17
-:102AC000EA73FC913E1E5DD026E4DEEACB93F35F11
-:102AD000EEDFB657E3E32C8DDABF8C5273A008FD0E
-:102AE0009CD682B15A16F0C7F538DEDF196730166A
-:102AF00074D0E5B969E90EE3BCF007BBCA52FC83A8
-:102B0000B75BDA6A26BB0ADFDF6D807F292CBD0642
-:102B10007F82902BBC9F67681D3A7E3FEF071CFFAA
-:102B20004B9E1B52027D7269FCBE1F5E45F5783BD1
-:102B3000C5E7E64BF36A3E97C223E67746F2F919FA
-:102B400026E5E06C5BF7391C7AD0B917FA1BF8E67A
-:102B5000DC734328FFA5D6A94571B8CE4979C43C9A
-:102B6000ADA3CA7080F0B68E823EFBA8FCBE34B125
-:102B70007514E48F9247CCDE5A44E7EABCD6229C17
-:102B800027953C63BED65CFA1E68CD45FBBD266129
-:102B9000A7A03FCCFBF9B416C2835DACC725CFE735
-:102BA000135ED438E1F40B9FEFD42CE11FE0F0DE8C
-:102BB000E6E3F5076FB619CA87048CF999B2FEA04F
-:102BC00030BA0C30771E8880BC7F96D17A0D1FF703
-:102BD000D62C614FFFE94FBBE96096E745E652F41A
-:102BE00077097DDB0A7CFFAE1BDFB7A77179BA14CA
-:102BF00073CCEC99FFDE623D0D72FF9C49D8A9F7BA
-:102C0000C6F37C01F41C814F9557780CE7A3B5BF40
-:102C10005B98067FCAFAAC6E3F477FF05B23E425E2
-:102C200097178D56818F2F1BAA879FB0E03C5A972C
-:102C30005A65E999CFC2CDC576AC97455B8AEDF36D
-:102C400043CE3B8D3B861F7171BA9CD96121B34144
-:102C5000A325F043E8D18D3BCCAD7E46E5762FAF82
-:102C60007FC671F03DD45BB825BE047AAF6ABF68F9
-:102C7000F31DA95521F8CEDF61C47F61AB310F7B15
-:102C80007468FE47D00547FEE3ED8A83C6FCF02357
-:102C9000C6FC171FDE3E136CFCCA68C1EF27033168
-:102CA00001F8A9AA3F997404FBDAC9BDAFC4823EFA
-:102CB0004B3FAD7A0BE796459B8D7CC6E9A641AFAD
-:102CC000F76FD7883F1607C2D79D5CEF97ACC73523
-:102CD000CAAE9917CA27E1F43CCD5A677A393FD575
-:102CE000D4AF1C0E7F48F514CEB81C9E2B5B37DA90
-:102CF000E037081FAFAF75CF1C5E17EC5515A34525
-:102D0000D998FAF1EC388CBE1B7E3D09EBADE2019F
-:102D10008DF6FF8A97071F86FCEED835E7064A67CF
-:102D20004E263C28FBD9A2FD5A3086E79DA35DFBC9
-:102D3000DA79BB05018DF687F94D113D7288FFAF39
-:102D40006A43181C9B42CA39FC8BF61DF88BC6FBE4
-:102D5000AFDE626CB798E30B727FC9D6BF47847E43
-:102D600057E7BE31FB5BCC98F70205BFFF1A8679A7
-:102D7000091724171D525F39810C97F71109BE36C8
-:102D8000EC2F633689765C605560BEB50E9B0BF305
-:102D9000ADB5B3603487E3488CCDEBE4DF2F6C8EA8
-:102DA00021FBD4C208AE179650CA224BD0CE43FBAB
-:102DB000F4E7EF9B495FA9C5D8E8E7698DCE3FB539
-:102DC000303622FFACC82F66419A07F8C51B3ABFC0
-:102DD0008031CF9AC5B9A9C6123C007C2C61EDE2C6
-:102DE000DCC3E9E80DF1C7D5F0791E4D803E646C77
-:102DF000BF9CB552FDE5FBFE1E11FA3DC44E4AE7ED
-:102E00003975AE34DB9817FAB1F9EE28DAEFB9204C
-:102E10008E027FAED3BC8FDBCD48C5BCFC1B85FECC
-:102E200033B745EC175C3FCD057E366D1CE2819EC5
-:102E30003297EBD991D023164751BD4DF18CEC2B35
-:102E40009BE6E40A3DFB9B978318A7F3118DEC23C7
-:102E50009B8A45BF9B1E1C42E590871A8D13417AC1
-:102E6000CBA632559E4E7AD2C7002D157AAEFCDE27
-:102E7000CF45DF0798BDB9D0D7D9C39174DE577A53
-:102E8000EDB3097A6C76BF9EF92A3D98555F9EFE98
-:102E9000B74DEE779D1B85FFF784E67BCB14A29799
-:102EA0000ECA16FBC3A8F1DEEDB21EF901AA4C65ED
-:102EB000F75FCBE1A97AD4E46A74F7E09D79BDB9F4
-:102EC00098FF898D9125E0B351E385BDE758B19016
-:102ED000DBD1239837C0D3BC6CB17FE4659B0C6910
-:102EE0004A14E73FDECF8952611F8E19E1233B1B55
-:102EF000D7D9487E87CF638484AFCAE67BFBEA5E7E
-:102F0000E0E9E6838942CF38B1427B46C0C5E9CAD1
-:102F1000F3A37E1449F6B913725F51F8E77C33923C
-:102F2000F66929AF364A3ED908FA633F5B2CCE4199
-:102F30003D7C62E483B99AC02B7B50E8A79BE245B5
-:102F40005EF1013FEFB0BF824F4A19E1BDAF738F11
-:102F50009AE7A61651CEE93D05F40E3FF7287A33DD
-:102F60004B6024CE8D7DD17BFEE8F8519A89FCD64A
-:102F70007EF8ADB1D7115EEEB304D67238065A04AE
-:102F8000FED32D82BFB854F64795507DAF8DE72B09
-:102F90001E5EC4BCBC7E451A237B10AFCFE2509F9F
-:102FA00077833816EC1568571127FAADE8CFE89CFF
-:102FB000407F5C5E6523CDA47EBDA604D13EB68471
-:102FC000DAFB4DA2BDD7C2D34159429FEF5C171126
-:102FD0007806F2F9DEF45CF0C194F1463EF88F6CAD
-:102FE000B1DFAB74688E4B1A953C2958DFF39B8692
-:102FF000D07ED118E9ABDD03BABD20F4FF8A7B6E29
-:10300000BD6924E07B31D103F0BE9CBA8BFC0DF38B
-:103010009BE6DCF111CE0D3B22E9FB7539FA5DD957
-:1030200023A107BAE6EDE11FE6CF38644BE1EDF5E9
-:10303000D6B2B33FE7E954FFAEF7A00F4C9D6EA6A2
-:10304000FA5399B08FB22631CE4DFEAF2C29BCBFBA
-:103050009BC66A1433D011E9CC58C1E1AF90F4BBE0
-:1030600047F26F63249BFD3307E04ACFCDE4DF6F67
-:103070008286D98BFFEAB0AA3F4EDB02BD66D00440
-:10308000B1BE547DF4837EDF96EB69A3C48BCA7313
-:10309000BC52FDAAF5111D59B148ADC1C13CEDCCE2
-:1030A0001DFF08F86A4A269BB41978BFD38C5805CF
-:1030B0000E6F6705ADFB985C17F854672C48F1114B
-:1030C0008121C4D71DE33A3BEEE5F98E96C11EB2CD
-:1030D000F9C873F4029CAF5C2817724CC99763CE91
-:1030E000F618E25779AEAE94ACF1C7FA098F5EC11B
-:1030F000EB573A6C1DD80F163C322D167126959B56
-:10310000CC229E6383F15CCDCFBF2F812EE1E7E41B
-:10311000F0F33078067C54B541233E1CD4E8B1A5C9
-:10312000921CD39C985F9523980DF95EE589F4A0D5
-:10313000FC4C8337F14436FC119329655F73BC8FD7
-:10314000823D965110C7C11C7D3FF054D15C41E7D0
-:10315000C5E8029DE4D3DFB25D84E729B02742DEF3
-:1031600058DA53B10E6BD5F70467AE83F839920184
-:103170000F1D56672EE0EA581769C2BE3965ADE0EB
-:103180006BBECEEC16DEFE3E0B8BC27ABF5FB62F57
-:103190005F63F1B5F0FC403BB3C42480AF8A89AFD4
-:1031A0004B06EB1B818793FFCE4663FFAFDCB091EC
-:1031B000E0517CC12C6D1313A1DF6D7397DCCF7AC6
-:1031C000F8A864F0F80FD0AE9B1FA66BC4073C3D77
-:1031D0009045FC70F351944F191FCC5E59003F5637
-:1031E0000DF3C28F90C23CB00774B14ED227BAB86B
-:1031F0003E0179A6E489921B9C0FBC88EB51F455E3
-:10320000F2637B030789E37547839DD29F36389924
-:1032100085CB809D0D29947FB1C145696B431E7D8F
-:10322000FF598387F2BB1B46537E6F8397F2FB1ACD
-:103230002653FAF3061F7DE7782139A4E48A9247E2
-:103240008A9F945C0AE7A3791CBDD794507B927B3C
-:103250004ADE611EA6921E79A4E89BA9F9FC296E9C
-:10326000C8B1F6399017A5E6332FBC023B49B5C368
-:1032700013E1025E84DCEB72D849CE67D8D83E9C5D
-:10328000D71B57783BEE0DD9576FA9D69825844F99
-:103290006FAD8B6496103EBEAD3EDE902FAFFFE06B
-:1032A000CDFEBC7F2D5E77E470388EDDFDF993BFD7
-:1032B000E5DF9FBEFBCB1CD09BC3B1ED318CBB3A8D
-:1032C000AA1B8E04E49BACA43F0C8A12E720FC816D
-:1032D0002EF399589F4FDFFD575ADF1DF5112E33FE
-:1032E000AF37BF3E82F0F531E8C4F1FA7B49A78AD7
-:1032F00075C75F7805EB7CB58DE4DCFC26B92ED76D
-:10330000737C86E86B9FA532D2CB342F63F0C37CED
-:10331000F6EFB620DFF3D9679A3DA041F7E187A425
-:1033200072FE5D5FFF0B8ABFD2EA8F903EAC232E08
-:103330000B7602BFD5108FA5D5CB38ADF681863878
-:10334000AAE8115E1BE403781A749B9F7790615D75
-:10335000B366CD892DA04A7EAF5AAF91BED1AD2FB5
-:10336000E498898E75D9164ADFC31AA7FDA299F68B
-:1033700027C5AF5C5E78035817CDC5B68521727836
-:10338000BEFC5E9967A2547DAFCBB6513FEF41388A
-:10339000F07EEFCFCBB42D2039E7B2410EA8FAF37F
-:1033A000F34AEEC91C817EC625B190F5E8CDB15037
-:1033B000FB3A047AE17C6417F6FF9A3EF601A59782
-:1033C0009CC43FAF24F8E9BCB5E4C5E75F847F6CDB
-:1033D000C9271144A725C3A43DA220306A1AE933A6
-:1033E0005E87C6E7B94CD27FE2F39FC6B6F3F2E53B
-:1033F000BB85FD92A71D4897ADAE26BBD6320F5FA9
-:103400001F0990AB463FF2E1173F896DA773853FD7
-:103410000DF1857C5B486329F0171D9F04BBF87292
-:10342000D6790FE2BAC2DB2DD7BE8E15F67DE12725
-:1034300057FECBD2D7FF9C4C70ECB9900CB9B6FCC0
-:10344000F575C97A2FF35E1EE6BF567E7365075B7E
-:10345000CE367C05BF5B78BD9539D2AF7D05BB828A
-:10346000EC141646710C2BED020F5D819C38D6CB07
-:1034700078DDE36EE6829D9F43BB2CAE380F87F369
-:103480007C1F717CAFE488FDF9ACF4A39EDF692654
-:10349000BDF0FCCE18E2FF653B1F7EEB2A9E5FB6B7
-:1034A00055C3B0AC96B5119E96ED36337BE8F90660
-:1034B000769BC4BEE15CFA7C4C1DF86971ABE6DD1D
-:1034C0005600BFBC2BAE5FA8BE28F9696944EB2843
-:1034D000A28384FF7EA91FA97A8BF73F6C03BD7876
-:1034E000BD73A4B7BC140D5D9BFF75BE07384F6F4D
-:1034F000194E7EDDC5ADBB96D1BEBF33DA89297EBC
-:103500006935DAA30239623D057284BE715ADA7FE9
-:103510004FBF6826F90338B10EBFD4849D57B5DB81
-:103520002EDB6D9778BB2947AC47557F716B476C95
-:1035300036AFFFC5BE0F286D95F35AEC682BC27EDF
-:10354000F9C5EEE8C9014A7F3CE9353EDED9D671BE
-:10355000495AC8BA7A3D47C40D9FDD629E0C7CB1C2
-:10356000808A336AA5F99CDE99A6D1B916F8E6F8E7
-:1035700039BDFBE55813AD5BBF6827E968B20B7B2B
-:10358000AADBE292F60BBB137AC65CAED5C57179A5
-:1035900057BB5BC403847F57F569BDA582DF3B6DD4
-:1035A00082FFA5FF5EFA97102742FEF8185B00FB2A
-:1035B000EBBC61AE59B7409EBD6315F418E87A0CB8
-:1035C000E7AA79EF2792BD62A5D5D51FF93FBD6B5C
-:1035D00025FBF9BCE1729DA7B48F847DB2C32DF6A3
-:1035E000F59AF57C85F0290FE0F4F7F3F9D5044C52
-:1035F000144F793C2793E07AA2DAE4B5919F23989F
-:103600000B3BE5311BF39BA127FF2C92F4BB9A4C9B
-:1036100061777F02FCCED39A84606E22EC5D928E3D
-:103620003537F3F2107AD63C13CC85DE72C626EC21
-:10363000782877222D11F51A25DFA01FF4DBE1761B
-:103640009E23FD724F0C839E6F7A2546D8137E12FF
-:10365000497E07D5EF05C9578DD2CFE5DF26E003B8
-:103660005CD09B17DB9A73A157AA7117C736D37822
-:1036700067E4788BA39A85FF40C685A13E8D6F6570
-:103680005E9CC73B9F8B20FDF4CBD4B6BD18FFCB0F
-:10369000E786901FBCC31D58B88FCAB9DEC6E9B013
-:1036A000E4A71141C07BEAB918F2739EB20A3DE863
-:1036B000544C32E94147621E9D87FEBAB64668B057
-:1036C000A79CD2982D05E5DBFA91BF6A49433DF9E5
-:1036D0000996F0E50E7F344F27C3AF7C6ADB10B24A
-:1036E000B39CFAA599FC8BFCFB7A7CD759F3BCBB45
-:1036F000B0EE7644939DEDCB9FFE6D48A8FF41A5AB
-:103700004BB61AED498AFEAA3C2957ACAFA45C819E
-:10371000C7945CB1CFD446B73E9A49F314EB95D326
-:1037200081CE5B7C7D24C33E7DACF5D564CD013C70
-:1037300007737F0CBCEF10E79A2F775AC92FB2E4BA
-:1037400095182FD96FEEBDC284FD628959E8BF4B31
-:1037500038BB8954D88796C4E6927D88E39BCE8F88
-:103760009DDBCC721C31EEA9EDE9C2FE1E94F9BDC1
-:103770008501F0F9940476DBCDA4DF6C29025E2F7D
-:103780006C8D36812FF8385EF8ED97DCF50381CF2C
-:10379000B885A48F33C4418F82BF5CC8CBDA7BAFBE
-:1037A0008A433C0C7BDFCC20FA2E583CFD210FC312
-:1037B000F1B52857CACBBD4FDAE03FABE1EB05F1DD
-:1037C000414BA5DF74E94F35D2E796DE73D563240C
-:1037D00007DFB3B21C0EC799D6876343E95126FBB6
-:1037E000E969EFA1FA4B797DD1FE9D588267BBD57F
-:1037F0000378C2E978D9ED7F6ABEACF6DDFCD1CAA8
-:10380000F7F5A24BE77D81B57DFF13C8919D911E11
-:103810003F7D6D25BFF3696BEB42CCFBF40B91242C
-:103820005F4EC78BF5FE0597877E1BE0B8F121B28E
-:103830006FFC661A83E85E1430F6ABC69D992BE4E4
-:103840006F6DA2270EFE8C5A4E07F4C7E9F23D6A4F
-:10385000FFBE95DA87CF63A46CD7BD3E5F88267E16
-:10386000393D40D0E3F48B83695FE988177CCEE172
-:10387000CDC039E574BC487153067CB0449E434FBB
-:103880008F6BA573F7696D17A51D56D16E49BDF4F1
-:10389000DB72BE4B01DF8027E1B7B26F68831E0188
-:1038A000FBF4A8124A83110997DA99C19FD8875E61
-:1038B000CC15F62CA83590EBE4DF20FDA4D50679D5
-:1038C000AC4B3DAE66E7A5FE32F283EED4C8EFF313
-:1038D000A05CA7803A49D9C7393F2EF56B5EC41B5F
-:1038E0002D6D5AB118FCBEB46EE32DE077358FA56F
-:1038F000163619E7AB0ECD4CF07444F275033C84D8
-:103900008E97D983DFCD0A5E809C4C7A2629D75BBF
-:1039100072C57E857C33EFAFA649DB40E3B8D5792D
-:1039200052CC4FE189A3C5063B193FE78BF23EE637
-:10393000AFE00C9FBF82A73557D8273ADCAE87C6C9
-:1039400082DEBF3293FDF4C2D7C3E312BE452FC35C
-:1039500089ADDB5ECCE17F9DEFD5E8C70FF986F539
-:103960000C7B348733778BD1FF91B7D5981FBAD3AF
-:10397000982FD86DCC17ED37E63D878DF96D725CC9
-:1039800085279C7311D786732E529C735DB9E29C78
-:103990008B3CCEB94871CEC5779C7391C7391779E6
-:1039A0009C7391C7391729CEB9F87E4ECAEF1A69B0
-:1039B00077041D28BEEAD548E507A7F5727E4E328A
-:1039C000C94FE5CF3CBFB880F2DDF69C323BD973DE
-:1039D000549CCE2D71FAD15CF21BB6DD930ABA5914
-:1039E000DAC98EBBFCE7C28E5B5312E9807DA17DF4
-:1039F000DD17F7407D2A8AD33FCDA5B8A6CEED22AC
-:103A00005E294872A37D8DEBFD6B05FDC8CEA1E25A
-:103A10006E2AB0DF25F44DC7703F0ADB60F49B844B
-:103A2000FB51C2FD27E17CA0FC264F5B3B5321EFFD
-:103A30008F3F67DF00F88F4BFB189BED24FD4BE9B0
-:103A4000D5DDFAD783DA33D8B7BFC94DA0F65D47C5
-:103A5000B8BEDDCB7EABD2CA8B25A43776E73768FC
-:103A6000268A1B4989A57D6895842943EBECB81704
-:103A7000F22EC644FBF8058789CE05173E34931E07
-:103A80003118FA79C87C8604A20CFC95BF2321CC9E
-:103A9000FF37C0507FD8BECC30FFDF50A35F6AFA3B
-:103AA0009A03385F4FDB30DC50AFCA7755181E25BC
-:103AB000DC522F6D5CBD3903F267554C17C1BF6AEC
-:103AC0004F24C5D5567178BDF0CB21C351506DF749
-:103AD0004E05FEAA5BADF1D8E72BE5FEC3EA8DFBF0
-:103AE00071B585F99D093D7C57ED64DE78DEFE6C8D
-:103AF00071F37613A7DB59D39647C7BAE0576AC963
-:103B00007072BEBA5D6B4DBE92F7F7378B5E309820
-:103B1000F35B8635F8C372C8CB5D596C0DAF777C0B
-:103B2000C3CBB1A4774B3ECBB03AA340EF966633FC
-:103B30009D0B60973227F4F0434B736254B6A36732
-:103B40009E3DF4FF9AE6C7E9E2C13DC52EC7C1819B
-:103B5000ABA0C7B58AF9568FD3FCA427CBF9AC9498
-:103B6000FB0ACB16FDDC2EF327E47941CDEFCC9098
-:103B700003452EF8311BF6659821C74D3BB7E3FE90
-:103B8000C0DD51FA758347225E32E7B763F9B84B5F
-:103B90003E12F1BA7FDC3421F64AE89F2F583D539C
-:103BA00078FEDEE6676D38172FB1046C3877563F24
-:103BB000D762F3F2F4BA1D2DF47DE18E0A3A6F2F2D
-:103BC0006275748E3CA9E26F253EAAC76B5B9C1C94
-:103BD000EE17070BB9511D25E2364ACD63DF445C71
-:103BE000FA851D5A31E63BDDB7CB5601FBB3AC1766
-:103BF000BE3EBADE9D56DA0FF6A456E1F7EC6B3DF9
-:103C0000CC08E6D17A9876D145E9F48B43E91CFBE0
-:103C100011F315929C28083BCFBE2BE290BBF68B8C
-:103C200075506D0B264DC33A79C34AEBA496CBAFC2
-:103C3000D1253827333686A7BEB16603BF2E9F181D
-:103C40006DE0E7D92CC1E0479E894B9B21F9E953F0
-:103C5000B20CF5674DCF0FE3FF929E729223630C77
-:103C60007126B5ABFD2E8DE259C61BBFF37435F13D
-:103C7000D90D86F6B5ECE69E7A38076FFD35E199E9
-:103C8000B1361BCE5BD5261157335BEF90DFDBE9F6
-:103C90003B9F88611D0ECAF2FC56EC8B56B2CB2BB3
-:103CA000BBF46CFC3BABB77D91135A8E8BF850D8AC
-:103CB000170CF1851C003A7F3241875A69EFA9CD74
-:103CC00013F69E5A7F9B0DF1B71CFF96348E9265BA
-:103CD000CD1AD9F3787D7B5A82C8AFC6F7DDC6FB13
-:103CE00006E8EF22CA8F982BB05EC2CB97F17943DA
-:103CF000CF58063B0DEC4CAA7FD9AFE2CF459B8D48
-:103D000076A365B0E784D0F1ABC12EE2D3253B7634
-:103D1000BD3580E3659A2FBE18EBA7A6B5CC5A51E6
-:103D200070299F29F97EA1DA447EEEAE770F119FAC
-:103D300075555B889FBF0B1FCBBCC29E19CE7F0BF6
-:103D4000F97CE0975DB85BF30434510F781900BE3D
-:103D50000CC34B5A2FF85278EAC65B58F922FC6321
-:103D600004E206B440D0DD1B5E241E55FF6178627C
-:103D7000A38D7858A8BBDE87BC5978C4CC02973194
-:103D8000EF45981FC6E7F3C3F8375F147612E5379F
-:103D90009879D142F96E3EF189F8E9E9538CEBB29A
-:103DA0009B6F7C629DCCB8984CEDFEB7F9E7BBF8F1
-:103DB00046C11D1E9FACEEF7FCF76069271CC94683
-:103DC000D2FABFCCB861B5DF2B3C0FBA7B34C51338
-:103DD000753932497FE8DE6F9CC6F29531991447F8
-:103DE000AC4BFB9C92BBBAACA7C6A9E0E5AEE1E048
-:103DF000E381C9B0BBDED39495D11EA297E8EBACAA
-:103E00006437CD5893486945A43319FB45C51AB3A7
-:103E10000FFBE067F7F54F1E0D3BFC3A6BD214DE4B
-:103E2000F567778EC86085C897527A7C63C4EC507A
-:103E30007BB64A5D79623FA8BDFB28ED5F674DEF19
-:103E4000C6CEC63A5BB7271621354BD77D30CAC9D7
-:103E5000558F168B3E280F71845ACB7627F0E66C6F
-:103E600029823D7A1868D7AF474F58B2AEB43FECBD
-:103E70005F35DF1C7A0AFBBBBEC69A0C3DF3D487C4
-:103E80007CFFD368FF22FDE024E28F93E0B78AA68F
-:103E9000FB6D2735E685FF66B1F94091D3B09FEE03
-:103EA0009F09385E8DD287E5919F36B03D05E37B53
-:103EB000FC142FA9AFC989EBCD5EA2D2E59B85FE8C
-:103EC000B65DD96BA55D177A3BF2D0DBE11482DEDB
-:103ED0008E3CF476A4D0DBF1BD4CDAEB07357616D8
-:103EE000E3DCE91FCFF2EA687F75E4412F5FA54567
-:103EF00079206F56699EFEB083B1ADA9625F0DA3B4
-:103F0000AF4AAFEEE4BA5508BF5F7BD1CE42E3C7FC
-:103F1000C6B178437E823DD550BFD4E936945F97D1
-:103F200032C4507EBDABD890BF31EF4A43FD9B3CBD
-:103F3000E30CF9EF8DBEDE50BFCC5B66C84F9B3CF7
-:103F4000C7507F86AFC2503E6BF66243F91C7D8539
-:103F5000217F4BF59D86FAB7D6AD31947B99D382FC
-:103F6000FD6D3FCE531CEF6FE03CC5D355BFCA710A
-:103F700084D275EC04535D6FF6F8EF4BFEDD3CC464
-:103F8000BB02FC992EEF81A4CBFB1C4D792EE2CF16
-:103F900034DCDBA7F36C5B2AF826BC5E78F9D8E842
-:103FA00083175C9C867FD83173BA85CB87B1571C49
-:103FB0001C9EC5F309431E986EE17265EC55075FC0
-:103FC000CEE4F90143DE14E5C30E5E40F903431E5F
-:103FD00012F9698C548BCC21E3A7FBF93CC65E9B9C
-:103FE000B9C123EC21BDC65BAA147840DC22F08065
-:103FF00034C8F913E941CE9F480F73FEACCA66EC92
-:104000002DCE9F488FF07325BEBFCDCF9548DFE5FD
-:10401000E74AA4EFF17325D2367EAE44FA9B86D9E7
-:10402000947ED8A053BBFF6CA8A6F468431D7DFF07
-:10403000B8A19ED2DF37F8E97B204FD90F826467A1
-:1040400051FEA465F0E3C10EB7CF7A26D4CFAAFC07
-:1040500081CAFFD758C7DAA3B14EDB2DF19FDB7BB6
-:10406000FC7A7DCB590BFB3C44DF6A89F63E9F47C7
-:104070007692814E92D7F2FB786D5A7A094FFFE221
-:10408000D27781DE334A2AD7C5B9710FA4CE0A7E12
-:10409000F9C8D4FBBDE0A63C617F5839C4BB97F892
-:1040A00044FAB1951FB93B3E25C4CF6D0A898BA157
-:1040B000BF90F816E56F56F134D7D8457C9EF227AD
-:1040C000ABB819D55FE94546F2EEEAF516D24F6274
-:1040D0002C2C88FE557CCCD5F6D662C40B5C5DE3F7
-:1040E000A038B4FEFCBBAD84EA79CD3CDDFA675E56
-:1040F000BFA8C77FDD5FC2CFCB09FED28B3AD95DA7
-:10410000AF96FE7BB4B78B723FDA23760A7A064FFE
-:10411000C9AEF624E29C4A7AFCE9A81F2DEA07D131
-:104120005FF67FF1F1627BD64F7A426B31E2A9D222
-:104130009739289E6ACBB820DDDF5AEED63F039D23
-:104140007C11CE4FA369FD64A5C34E5026F5DE6FEA
-:10415000A1C31768A7F0A3F0ACE8A2F01B12774444
-:1041600078ED8B4EE1F409A78BA247E9C51E3C030D
-:104170004F97D2A1874EB0C7FEBF4287119656BA5D
-:10418000FF175163F700AEEFA2CB6D9D6C12EE13DB
-:104190000FCED49B80E78A8BAEB790AF64E32661E5
-:1041A0006B52E59EEF289F85F27E7D97DFD147F920
-:1041B0003B912A1EC1EB28E6749920E5C7AA5281DB
-:1041C000DFC96E33E17742C122D2479943E8752EA9
-:1041D000FE1FE4C9A4AF7D4DE86F5292513F54FEDB
-:1041E000E01B647F93C3FCC03748BDF18630BD70CF
-:1041F000D410A9F7B9995B9CFBC43DF789729F4E17
-:104200009374CEE287F9B1A023D32D105A8771CFD2
-:10421000BD08F7C0FD94BF9E0528BD910569DFBAB2
-:10422000890B38E4BFC718C5331E8A9E5ABE9CF757
-:104230003761F8846C7C0FB9D777DD907E74AFEF6F
-:104240000FCE907B7D0727BA486F3868CF223D0696
-:10425000EBC01A6247FB2597FB086538C4F705A435
-:104260006FF27D219B33F92FF8BE80FC0D796B181E
-:10427000DA4D7219E34D54FB1B9DE3996578DF72AB
-:10428000F7C6A25707C2BEF24EFCE089B03BBF138F
-:104290007FC544CCF79DF8FE269146D8282D7C2575
-:1042A000BB373D4BF161CF78939825F152FC2A7CC6
-:1042B00086E351E1F79FC0E78ADEF0D9041CC0AE67
-:1042C00067FF20362513FE2FB1FE6B5F29EC0FF838
-:1042D0004F0134C425DB055EC2ED3B5F34B081C0C5
-:1042E0002FDB1A47DFEF903C7475FD18AA7F4DFD58
-:1042F000689ADF5551FADA217C9C3325C15CAE39CE
-:10430000B02FB634D2FDDBB32F9A3DD0BF6BCCAE0D
-:104310000D1EACF577C47D39F6F5A10CF8DBD8D6C7
-:10432000DEE3766BEC0A6F7EC2A737D3DB24F63F61
-:10433000718F58EDBF032344BCABBACFDAD77E3CB4
-:104340002A4AC8958111420E2A3AF176944FE3FD2C
-:104350008CE27223EDA128D2BF4724781F073ED5F7
-:10436000391AF14DD8A7AE09E6C7213F19E7499E92
-:104370007F5BDE4F7B7B685D5226C7F7219BFE2C5F
-:10438000DA31F3D766ACEBC61C8DEEB9771DC94A9E
-:1043900002BEB7A97557C48A42DF1B50FA71F7787D
-:1043A0004966F28BAF847F3409E7263BD98BAE6137
-:1043B000B9E4379D28C72FFD6525BD83A0EE7D4458
-:1043C000A4988CEFE7B8A20CEFC144E72518F231AE
-:1043D0009E0186FA71A3330DE5F1DEA186F2C4C910
-:1043E00025867C3FDF1843FDFEB3C71BDF75D36F07
-:1043F00030D44FABBED99057F22B4D7C62E9757328
-:104400000DED07D5CF37D477FB9718DFB7F17BDBFE
-:10441000F29221F7C45FD6FA9586F21FC78A7B0D08
-:10442000931D0BE9BD8A9CE6BB8CE34B3AA5C509FD
-:104430003A319790AF7EFE1FF8A634C5286F273813
-:104440008DE76DAE0F6AD8DFD3EA2C86EF9FFD0FA4
-:10445000E91C8E972EBE3505511FFA10CF5FA30FB2
-:104460007D08768D8949564F80097B7AE8BC604F7C
-:104470000FC503ECE9A179D8D38DEF4219E90E7B82
-:104480007A68F9F02346BA8F6C33D2FD8AA346BA14
-:104490002B7E0CA7CF95ED467E08A7CF5527C3F8F6
-:1044A00043D26336FFEFEFE29E34D16B9243634F0A
-:1044B000B8FF79FA240FE5F4C9EFA1CFFF49D35330
-:1044C00087F6C3FDF40B1936D0AB53BCD7B742CA3D
-:1044D0004F154FC8CFBBE23EDD5D66F2EF1F3335AF
-:1044E000D37B49079DBA1BED6F2BA8D3E03F4861F2
-:1044F000BE5D0B397CF3FE2382FC09F306897B9DAC
-:10450000ACA09DE2EC959C9B9726E258860C95E723
-:104510000B8F886729182AF4C2188F93E25E2B0A42
-:10452000C43D027E2CC8985708FE793712EF1676E4
-:104530006D12F6FB76ABB85FEAE77C04BF18F44473
-:10454000E871E9528F6AFC9DDD0EF8076F66867D83
-:104550007148C06E88BBCCDFE134E40B5B530CF5D3
-:1045600087ED7319CA8B837986F2E1473C86FCC8D4
-:10457000B6D186FA571CF51AF257B64F36D4BFEAB1
-:10458000A4CF904F639D8F03BF8334711EAD1A2A51
-:10459000E278F81A227FD2BC7BE3C5FD41794E5503
-:1045A0007AB08AC7D525DF85EBD3836C3AC5F73659
-:1045B000A6320FDD03B0CBF30933EAD9BA8CA75585
-:1045C000FA28F31BE369551C6DB73E2EF56FA50F56
-:1045D00087C4D17A43E368E7C97BBEE1FB5E9DA453
-:1045E0007B38FC836C62BE8D77DAE8DE82822B1C1E
-:1045F0009EBFC9F8CE6DF6DEEF8FDC3D54F8DB7F51
-:1046000099E5FB3EF8F529888FACDEC6F3B4FB399B
-:104610007F35FEBBCDB3D6F5DDE3CD1B26E6536E6D
-:1046200032DD565640714BB37F1632FE0FE5B8AB04
-:104630000AB45EE7372F4EC415B1389B0BFCDBF78D
-:1046400078029F2936D644F75C64DCF9AD1B5A1F0B
-:104650008489BCDCD66C15EF9705ACE08729E3B9FB
-:10466000FE540CBBD5370F3BB89EF154BD85EC1002
-:104670008F0CBD69863FBBE71EC1207EBE007F4018
-:1046800057C1B9C45E20E266F70E15EBBFD4FC75C6
-:1046900077FC37D9D31993F25B9C5B7AE137E2431D
-:1046A000358F7F751C78389ED4B990C97D275BC241
-:1046B000A5F0D77D8E97F853F1F8AE1556DF330E7F
-:1046C0008AEB9F8C782645BF8105822F4F0E15F40B
-:1046D000463DC8A3BEEA959A0BE260AFED62AE38E4
-:1046E000E7B7D823FF557851F8EFEB7E4F5FF2E143
-:1046F00012B9D0C77D9FBEF893FEFE817B3F21F2A9
-:1047000041C497487A04B24DE4CFBD37C6B88EFB9A
-:10471000E70BFCEE57FB859F9F278D7282C1BEDCA5
-:10472000B8CE2CE584D857A16FE0FB827556D237FE
-:1047300058BD8847AE96B298315FF29811F0C75ACB
-:10474000E93DAB6BBC8CF491F90E5BA085D7AFF063
-:1047500087EFAB5E6A4FFE1A17DE2DF1DC03FB7BA1
-:10476000E57A63BD450EF1AED782B073E922792EAA
-:104770005D14762E8DCC97FBB28779486F92FE67D9
-:104780000567375F05B2282E18E754B3B09750BCC1
-:1047900052B71D1FFE85907734393EA3F2B06F37B4
-:1047A000597A8D23EBC6671F7EF233F093BBB0FEC0
-:1047B000BBE8FE4FD7EE48E14753FE0B59FF8CFF95
-:1047C0000295A33E7A3B5BDC56043F52B7BF23CC35
-:1047D0006FD2E530C58E467F3BC5FB0B2A0E60C904
-:1047E0005F0345CE103FA7DE6E32C45D84A7FA9A00
-:1047F0003D1417D062D14BF2F93C4E5B3C76BC17AE
-:10480000799FE36032EE6B4F91F69A7078BBF5D0EA
-:10481000B19AF013FA851EDA3559233D94CB4586BB
-:1048200075A4FCD9652C988454F90FF4F5A309CF2D
-:10483000CA7F50111C4D70CE685C64C5937DED8FAE
-:10484000AF2E8D72F5F815DAD3453C4A5FFE8569C7
-:10485000173DD4DFF48B63A89FB27CB7B8C7D5F4FB
-:10486000E00AF0D1D01DCC8A79B687C563ABF4409D
-:10487000BEB07F1FCB57725BC6B9ACD1849EAD3141
-:1048800015F742725BE52F34CB7CA9C8AF5A27F2EB
-:10489000EDF21DA3EDD2DE807922C57C702EDE29DB
-:1048A000ED11980752CC03DF21A790879C421E721E
-:1048B0000A79C829A49053F83E9FF9328ACDC20FD5
-:1048C000323164DDC00F3231440F821F24340F3F78
-:1048D00048687DF84142CBE107092D871F24340F3A
-:1048E0003F48687DF84142F36CF4F53D79C8356F77
-:1048F00099213F8DEBE31343D62DFC20A1FDC30F7F
-:1049000062E84F5F61687F0BAB37B4871F24B4FE4A
-:104910006DF59AC14F729BBC975EB93981F8638E71
-:10492000DBF7C37C4EDF3F447F738715E734F3FE2C
-:10493000C5747EAA8DF2083A374F1674373141E7B5
-:10494000CE3944E7D536912F1571B1BDF91B2666D6
-:104950000B7F0352F81B90C2DF8014FE06BC870D4C
-:104960007F0352F81BF01DFE06A4F0372085BF011F
-:1049700029FC0D48E16F400A7F03DAC1DF8014FE95
-:10498000067C87BF0129FC0DF87E0C7E8FEC1EB8DB
-:10499000A0B7671BCE779C0F0DE73BA7210FBD3D4E
-:1049A000B43EF4F6D072E8EDA1E5D0DB43F3D0DB02
-:1049B00043EB436F0FCDB70D75D1BA84FE1EDA0EEF
-:1049C000FA7B68BEB0D9FF266C4C376D3977186911
-:1049D0007B8CF694C645C1FBCF1F9F01BF517BA4C2
-:1049E0009611CF97BC553B356322D7CF74195F56CC
-:1049F000C43AE97D675DBE5BA30719C5C316FE25F2
-:104A000045C805756F087F9CEEC5BB199D03CAE4B8
-:104A10007EAADA7B98D34C724BD6EFC9F75E2F7C17
-:104A20007C558FE465081CFC80588C3888E2D58E54
-:104A300012C4716F3769220E72AD88430DE72B7374
-:104A400081904BDB4DBB0E4621AEA542A3F7E2732E
-:104A50002DEC08DEF12E6CAE2B81BE703A3F5ECE9F
-:104A6000AB6E0CE26214DCCA0EC8E504DDAB1ADBE7
-:104A7000C96C5505784F8CD91640BEDB849E807674
-:104A8000383FE6FB35EF3321FCFDE77CB1BFE9FEA3
-:104A90001563AAF8F7FC9D7563705F6B4A9468F71D
-:104AA00093A763098F539BB467702F6EEC4EE6C5D6
-:104AB000FDCB6FA43CCDDFE9B455D1B84EBAE7A524
-:104AC000FAADD89241F7D22A58FBC414B2E56BF480
-:104AD0008EB9C21B9FDF61CC8F8BF82356D247C59E
-:104AE0007D9128795F44DD13715B7CC1A1237BEE4E
-:104AF0008B5C3D22BE14F15A6CBF7877EFA611157E
-:104B0000EBFAF1FEF5807877EFEA3FD5BD49F9ADD4
-:104B1000E2DD3D628351340EED6B83FD1ABDF7304B
-:104B2000D5DF624A72E1FEE81A6B32EAEF641EA832
-:104B30003F8399B807A9E02B606D26BC3BCEB798A0
-:104B40004389217CC425C074D0BDD863A5F720CA91
-:104B50002C4E2BE446F83E7E693C5D989E10160F65
-:104B6000D1B8FA68863913F61E932708B9B5279A83
-:104B7000F405A5EF54C838A80B4D6FD27BD615BBF2
-:104B8000847EA0733900F9A7E2236AB3021926E8EC
-:104B90000B035A8A12CC62FF2FC07D24FFCB334710
-:104BA000BB708FF14D8AD7AF5837324EDCD711FE2C
-:104BB000872A89A72A19FFC20A9CC9D03BD53BA6E0
-:104BC000A5E6B17174DFAD59E873CAFE52F1ABE1ED
-:104BD0006F81CE154FCAF740D657D03DA0F038149C
-:104BE000A51FAAF74E16375929BE6571981EB854ED
-:104BF000EA814BC3F4C01B0AC2F440F53E9DAC539E
-:104C0000F1AB4333484FA913EFF195AF117A0BDBAA
-:104C100025DEB12F5F33C184772BCAF7783D5A2F39
-:104C2000FCF1BED45FA660D044C4F90CA074E6C504
-:104C3000144A675DCC233980BB18A07FFBAB8CF492
-:104C4000E90FA4BE3203717EB81FE78F90F17C8C10
-:104C5000F4A562E62C85DC18EAD50EC17C3DC5AA18
-:104C6000AF431CE1941646F7616E825EC30B664348
-:104C7000CF190E3E7797D2BD80C91ADDAFB869C48F
-:104C80000AC9D79CCF19F8DC2FF9D647F9EEFD40B9
-:104C9000F2B7EEEFB0D0BBAC7ECD8677D974799EFB
-:104CA00055FC1BCEE7F3E4EF4D3087B03375DBA145
-:104CB000002C3DAE72CD4CE88BF360BB1B2009C9C4
-:104CC00051145320CA9B0AAE99D984C3CDFFD03E5C
-:104CD00051AE7E8781EB5990A7B7DE5E6C9B1F2299
-:104CE00057CA8AC63F5BD8AF87EEF3BBEF8D15F48A
-:104CF00087FEBFF2BE9CFEDF767FB192E319EB63C5
-:104D00005E5CFB1D7819776B01F34E1C8DF798D50F
-:104D10003C5910F16A7365FED7058BFE737D01E186
-:104D200087F2819D5366FA69BD0879750BE4951980
-:104D3000724A7FAA00F73BECED93408FE8824E79F0
-:104D40001F5EEE4761F6885F17083A84DB252A0B61
-:104D5000841C671657C62D744FD545763D05FF67F1
-:104D600056E3BD4195FE52ED230DFF9A78FBAF92BD
-:104D7000F59F437E3C6A12F7B707989B99B40F8959
-:104D8000DFC990EB87C9F70C7AE8CFA506E87F9FCB
-:104D9000E60CA5BFBE5E13F7A6FBB0E3B0BCCEC762
-:104DA000B7C18ED7207E9FE3E95CC1474FDF652303
-:104DB000FDBBDCD6F626DE695278FCA4FE4756F130
-:104DC0003B2FC11CBC3F35B72E92DE7B2D2BF2B59D
-:104DD000812ED1051EA2C7B38829E5F5DB9DBE0F44
-:104DE000309FDA0D079EC2FDF1E5FBDD74AFB162C5
-:104DF0005FF13D78D7A2AC483F8AF20A87D386FD9F
-:104E00007B59533CED67F3FACBFB85AC93FC540A1A
-:104E1000FF9D05C28EB5BD48F47F5E9E432028CB22
-:104E20000CF5645C71D83A51F6C1703B43F87B02D3
-:104E30007DAD1F654F80FDC016625F54F6096BDEC5
-:104E40006773B07F96DB8CF7E154EA2E94E75C79C8
-:104E50000E5CD0BD7F154CEA0F7D79A346BF5B5336
-:104E6000E570CDBA92E7AB8E581129C8A624B8C414
-:104E70003B12F7897724E6F3F50A79532EE386AAE5
-:104E8000368FA6F55615E06962DFEBF2968D87D274
-:104E90005F05FF04BD744FBCCAE9B52584ACFBCAED
-:104EA00066CD70CF5CE5E30B853DAE1C4F98974017
-:104EB0005EB86D78CBA59CAB1588437317BA0C7E92
-:104EC000575E8FE218A664B2B7C43B3E1C6EB7189B
-:104ED000AF24A4FFF9CDC6FBF2BCBE7897A2308602
-:104EE000FAAB70F279C3FEE174129C1C0F84A7CE5A
-:104EF00007797F2E1A87E851190C5871DE2E47FC6E
-:104F000004CFCF7506AC18677E9378B742DF20C612
-:104F1000D1D7C7DB0AA12F599CB674E04FBE6BCF27
-:104F2000E1233958C5F182FB3FEA1E60387E2A240E
-:104F3000BC55CDF1463DAC79A315F498D3C7FDF926
-:104F40009B24DDE7378DA3FBCF55162FC5D7EB127A
-:104F5000BF7F5C11793FFC0373363D6675F3FCD56A
-:104F600085827F6F92789D9219CCA1F76956447A19
-:104F700000E71C6733CDAF1BBF8F707C687807C517
-:104F800047F8E57CE1471C59D526233D7BE011F825
-:104F9000ADDA5441EB6DA145B73943E1D87C200728
-:104FA000F77AE6F0F58D77779853A7FB369F3F3277
-:104FB0002B83E6C9E1045E633CAE49786F86F30952
-:104FC000F1B1E217753F588DB7A050DC135C50D893
-:104FD000BB7DBD675D7A49BF69E4F485DDBBAF7514
-:104FE00069C345233EAEAD4ABC0316BE4ED5FA5446
-:104FF000EB52AD53B57E9FB2FA82295A8F9CE1FBEA
-:105000006DDDCF7AC1D3B312DEB992AE1CAF874348
-:10501000EF156D2814F2A83CD3B8DED11FFABD4BB2
-:10502000958F0FE6E01EA0AAAFC62D97BFD305BE91
-:1050300007BFDD25E98EFA2BA9BEF17E4465B7BC1A
-:10504000D8B92E19F2629746FAEECA070FA5FF1BD0
-:10505000F4D817841E7BBA66DBB254D80D2C818C31
-:10506000D0F799AA82423E2CE0FA0FE4C542B94F2C
-:105070005F97A3DF573832A4DEC32FE4EA42BE04B1
-:10508000215F7EFFC26B1F8D71F5EC9F0AFEF9EB6D
-:105090007F6DAD7084E24BF0F9FD795D74EFABD2BA
-:1050A000617321CEB6B2A982E42D4BE1E7092D242C
-:1050B0004E2A8C0F2A9A347A37ABB27E54C0FCBF8A
-:1050C00028972B3794D1DB3C8A4EEAFD0DB59F2AF9
-:1050D000F8774AF8E74A3E7E49AEBFB9D56EDB4263
-:1050E0005AF76E5B25F85F96CFA9327EEFA653B7CD
-:1050F0009FB9E09E14798F85CE251BACC2BEB73315
-:1051000086F4D5D32B5F796F26AFF7E5A32D19D0A1
-:105110004F141C8BA41D6F81B4C72D947A2BA7D379
-:105120001B85217276D1D3824E952FFEEA53BC0F98
-:10513000559E29E5D983E27EF9FCD65D44B739EB6B
-:10514000375ADDBCDE7B856E839CAEAC2B76C23ECF
-:105150003D777D8B1572E0BD4281B7707E2F9771D0
-:10516000A90AAFD877B410FF85AA0FF9B78B8F7350
-:10517000FB8AC858C465A871FE5BF271655D7C024C
-:10518000C6ABACABF821CE3D4ADE87AFBBE3916244
-:105190003DCCE7FD615D1E1FE7A17BB6E5F2F7A5FB
-:1051A000C2EB9F9374FBB155BC239816DDFA1CC566
-:1051B000152C8FF2403E6467B707302EF81970DB6C
-:1051C0004CE2DDC1EC9AF6AF0007578B293E05296A
-:1051D000DE3B829A9CCCF3CF98C47D20C496204DB0
-:1051E0002A12FC00D314CA59523BBD7F16129F6984
-:1051F000E0571BDBBA1EEFAFD89218FDDE8BE24FF3
-:10520000D58FE24FC5BF7DCDCF517479F33BEE967C
-:1052100076883C4F06EE51CC7B6830BDCFFF5DF306
-:10522000B4C977F0BAE71B217EB7E092F9668B73B9
-:105230004BDFF3DD549ADCCB7CC3E7A9D6898ABD6A
-:10524000EEF62B340BBFC2718DEF5FBCDDF1159113
-:1052500014F7A5E6A5ECDE971B2FEF294A9076847C
-:10526000F618E891E5F2F7205850E4F1BD2CE4BBC4
-:10527000DAF7D5BB614A3E9FA893FB226B7F10EB08
-:1052800099D567D13B19C79A8FC7E0FD8EE3E30438
-:105290007CAADDED5671EF95C5D85C783F919FAF44
-:1052A000E8771F1634F5A773E4ADF55924176EF5AA
-:1052B000C70BBB83D4EF174A39187D7BC53D57A078
-:1052C000FE66B753E3E32C70783EDF4CEDF33DD040
-:1052D00007A33795D93249EF15E700E507BA5D63B3
-:1052E0003EBACF043989F5653A908D7D67D16671F4
-:1052F0000E986262EBE12F1CD4E89B940A39F1B856
-:105300007837926D31BEAB7430C7776311F016F603
-:105310001ED9EDD6566F7FC871AE6FC0CEB4C0E156
-:1053200023BDFD6D29278F6DEAA0F7C9155E2FB942
-:10533000A76213F7523B634C647FBBDCFB2A55D258
-:105340009FA4F846F9A39EC0FF5D093C99685F2BB6
-:105350003597D3BB3EF76C9A4069D5C6D247FD85D9
-:10536000B80FEB4B1E43705BC93E56553B41DC1FEB
-:105370007D26221EE79B0CAB3F23542FAD6AB997C5
-:10538000EEA99C6C89A47B2A139D6513E393E8BD69
-:105390005DBAF7A5EAFD40AECB25B5130CF74C1668
-:1053A000F03E1107FBE7D6688A2B55F747EE8ED201
-:1053B000BF5FD44FDC23B9D225EE8FA4527D57AF07
-:1053C000F670957EDE20EE2384DC8B993A87B7AFAA
-:1053D000A97D3916FD2C7DE483511C33B03FAD050A
-:1053E000DDBAEFC56C16F7621A715E821E99E09BFA
-:1053F0003907F8FFA599F0DFD778D5F85192907367
-:10540000C4AD8138D25BF520B3C19FAC3B19E9C56F
-:1054100027CDAC1E7A80D25FD4F747255E4EC635C5
-:1054200067803F166F7F2C03FBCBA918912FDF3EBF
-:10543000EB6DC82B7D6B84D0CF2D8CF4E14ABFD0AF
-:10544000AF5975827A1733721EFCB145D1E21D1E29
-:10545000797F46C1A5DE5B3D6511EFC5E05E0CF8C6
-:10546000FD134B7001E8FB09D75F718EFD819463DA
-:105470009F349BE97747FC7CA1400FF9A4F9E5181C
-:10548000DCCF55FA5AA9F9F75EBC47B3728FB8A7BB
-:105490008A77CDE9CD4A69075926ED202B5FB54EB5
-:1054A000C2EF8E70FD8BBED45882B6DEE8B744EAF8
-:1054B00057DDF9DDBBE8DC56B353E80F35AD1DA46D
-:1054C0003F287D44DD8B5BBAB383F409D56ED96E7A
-:1054D0008197DADDE27B05E2D6E5EF856AD9384FC0
-:1054E0006B94FFB460FEAC3596D07C05E53F2D5043
-:1054F000F6914ED207EFCFFB0D9DC36B9B64BF3C73
-:105500006F0D19EF4D30693FF13DCB81F662DF57EA
-:10551000E5B5BBE3A97DB0366A3DF679EF32870584
-:105520006963AD83F6FD2D75A63CCB080017E581B8
-:105530001EB75FC66FF55BFA9F91B01FA4B2CE4352
-:1055400078F7F5A0533F0A7E55BF67A9EEBD9C7F53
-:10555000FD8BE1E8FF9A41ED17F0C683754DED2C08
-:10556000F827DA8BE43C0ADA8783AFFB1D14F2F9E3
-:10557000492B5B4FEF075B7C0C76FBA0F42BFAFF0B
-:105580006212BF2FA1059F0DD5AF9286093DDC1792
-:1055900021FC8B5EB77E0A707C4FB31616E34CED90
-:1055A00032E7A07FF53B2A4A4F1D2FE573BA3C5FD7
-:1055B000D906A438C0C79AD74BF710D7161CACC46D
-:1055C000BEFC40A79D7E5F55C5E18DEF8C22BD35A9
-:1055D0007DC064DACF34978595F3FA070B4C41DC34
-:1055E000DB7A80D9455C803D4CAF3545523CB2B644
-:1055F000FF177F813C4F337F7508BF5392F66F1AB8
-:10560000BD7F39AFEBF327F11B33E52C504CEFE0B6
-:10561000C5EBA66190C35D933B744EB2079CAD761B
-:105620008FD8275828FCFBEFFC4B6C82A907AEF300
-:105630009D9FD3BB82E73BED64AF1DBF5FBEB71735
-:1056400006CFF91417C545F37AA4679E7798E89DAD
-:10565000B1F1FB0FD1BB79E3D5BB7A76E3BB7ACC52
-:10566000951E0F7B32D950B95290DC28E8764D9CBC
-:10567000F19C98334C9CB7728609F9A1F0D7653F2D
-:10568000F78EAEF5ACC3E5CA7FAF7E6FAA3A827ED5
-:105690006FAA6B7FD6B7BE9FF001F407AE176CC838
-:1056A000F4160EEBD7B37FCE907851FBB059F63F8E
-:1056B00043E26786C324F011F67B1B8A3F14FD1575
-:1056C000BCEADE91A21BBBABED4DDC0BE2F42A7C05
-:1056D00088119DAE203AFDE5DD75B8E63FC0ECEDE2
-:1056E000D0DDFF123A05F10ECE65D3A92D9C4EC137
-:1056F000C8C1D0131E11BFBF151ED7C8F218ADF315
-:1057000079E628B203EAF25D70BEBEDFC4FA56EB5A
-:105710007AD0E4F642EC8FC7F8D11B70B59B5AE9FA
-:10572000FBF7878978C281AC2D55C6DF8C845ED6A5
-:1057300028DF3FEEFE1DC3C50E7A6FE47C40BD7FBF
-:105740001C787C211F77D38C02B2EB9F6772BD5708
-:1057500077BF932DDE3FEE7E27DBEC273BC99C28ED
-:10576000B2F374BF939D23DEBB7E4D63B97887D6B9
-:105770005F66A7F8F8F077B2F93EF31CFC194F54B6
-:1057800047911F4ABD8F3CDEA9D7818EE1EF233FB1
-:10579000AAF9E62C407F850EEAAF7D4ED48BDB055F
-:1057A0009A83B0E31CAB8FA177A1155F2AFBF5208C
-:1057B0007FC7E3C093BAD7F907C95F0AEFEA5E9BD8
-:1057C000C2BFE233BF95D1FD4FD001EFCAAAF7D9CE
-:1057D000B5D5526EA8FB846F785C481F8CD7D70371
-:1057E000EEC6155C6E905DBCFD0ECCF7C93B63BC8C
-:1057F00080EB98C9F8FBBD2A7D7898C9F03BA1F3EE
-:10580000E47E354FC5FDD71BE3FEC3DFD14C8CF3DF
-:105810003D328CB73FAB7D300A1FDFFD3FE65EE3D4
-:10582000489E92EB7F44B4FE24EAABFB0F4A3F7CD8
-:10583000B7F88B74FABD91AF0FD1EF2ACE75FA028B
-:10584000A817992DFC017F486DA7FB1A7F98F3D705
-:1058500074B227AF16EF7F5E2E9C97DEA715FCB0C3
-:105860006A8188374C6375C4BF293DF7342301C76B
-:10587000FF6FF7697BEEBB4E1E7E82E22E7CF47BCF
-:1058800015E1F4181B71F065173FA9FC76D897B3A2
-:10589000E83E69DCC1556E9E3FF6D239914F3B78A8
-:1058A000C1CD69D3FED27991CF3F7801F7513F7BCB
-:1058B000A953E4AF62E4CF3AF1D257B370FFB4BF5B
-:1058C0005BFF23E835F362DD9BD85E3F5A73F3023A
-:1058D00037DDA72C4BCF13F7293F41F98CE4F9EBC7
-:1058E000E2B49EFB94268FEF8FE0DBF35F09FE7638
-:1058F0007358C127FF6CAAEE932A79DB975C54EBAF
-:10590000EE5F751F56AD63B6DDB3DE0A26F4FFD336
-:10591000F7549987CFEBFF021C7874630080000076
-:10592000000000001F8B080000000000000BB57C89
-:105930000B7854D5B5F03E73E6994C9249C80B02EA
-:10594000E104420C18D299BCC05BEA1D2089015ABF
-:105950001B6CB52018068D90D76442A82DB5D80CC5
-:105960000611A8DE0B5754B06827400035E8A001A7
-:105970002718EA00922252BF98FB37F2FD5FE10B35
-:105980003E90979310B557EF55B96BADBD4FE641BB
-:1059900022DAFE7FF8DAEDDAEFBDD77BAD7D86B196
-:1059A000B196F3D18CFEAEC98C1D3FFC9EA249641A
-:1059B0006C4681D16A90A034772BC6020EBB01DE03
-:1059C0007595F935B1BC9F36B45FA2D766C17E75B7
-:1059D00066EA973908FD72B1DF9F476BB1BE416F30
-:1059E000356430F6B48EB94D098CC5688EC8B84E92
-:1059F000CC2063CDD07FAC8131631E63297AC6B0E1
-:105A00001DFA312394BB06F97AE3121A56309867CF
-:105A10005C85D9DA9C81BBF53056C858DA28FF6816
-:105A2000DC5FDA4A3DD5C7687A940633638126FF86
-:105A3000DC0F33192B8E8ACD653F8052CFB2711F98
-:105A40004C13656D85F54AE4AFBAD2006EEC906CEC
-:105A5000B0342B36946F671319ABD7029088FF339D
-:105A6000795A711D6D77F51EE8D7939C66DD08E0C5
-:105A7000D8D4832C331FC6BBCA72D804C68E5A1C16
-:105A800039D62468679B241C1F9DC3C7FFAC2C7AA2
-:105A9000870CE3FB0FDF54E880BA3B0CCA01666554
-:105AA0002CDF3B7A81F61680E39442C902B075EC94
-:105AB00002ED688053940312B41BDDA31714DF8238
-:105AC000E7335A3ECC66EC174C627180970CAD639D
-:105AD000BA15CEEB2CFB44CF34D83EA02F9F0AF74B
-:105AE0006A854960FDA4A3704FB0CF8139319E1DF6
-:105AF000703E96A314627BBA6E20D602F7D1FF9552
-:105B0000B6CC63A671B13F87FA6BF8F7AF8C3DD77F
-:105B10002953BD0AABE5375689EED795697E0CEF60
-:105B2000AF3ED568A4B2F36A29C379B4E59977C0CA
-:105B30003C763D5B529E73FDF801AB86F695B10E47
-:105B4000103A86C8CBCE14F8BF28A6C26E369DB1D7
-:105B5000965F41C5BFF0763809D34FD208F896ADAD
-:105B6000C5DAB0FE76EC1F6C6776230B8E775AA7EA
-:105B70006E5D9B29D6433C2F639E49708434D620AA
-:105B800031B8BF54E627FCBC644BA073D11FE0E9D9
-:105B9000D94453CB46A45719E8328F4A6681322D37
-:105BA0001AD683F6B4374C1EA4AB5D264EB7991AAD
-:105BB0005EEED2F0FEFA28E6463A1D073083F26D1B
-:105BC0009BE377B6249AC74FF3C8FB6D488FA39920
-:105BD00097D64F616EDA8FDA6F2CEB3621CCB40397
-:105BE00059844F5933EC7D26D9666E463A0B34D929
-:105BF000D947DA607D203A765528FEEA71BC3974BF
-:105C0000DC2C1AA78E77AED2B08F46E1E1FD443F7F
-:105C1000CE4C8DDD9383E3D89B521ED677EBCB63BE
-:105C200082E37A9B8CEC23B8D7FFD3C4A83CDD6415
-:105C3000A1F5FF6F532A957F6B52A8FE6C533695E2
-:105C40007D4D56AA7FBF693A95772D8A2940FA770C
-:105C5000F966B28F8C42CEC0FF9C5E9DA32F04EEEE
-:105C60009D393C1DBD26E8A83763F8F66E6C077CAD
-:105C7000F6DECAF1D97F3FF3ECC820BA5C6B49B8B5
-:105C80001EFF30C284E7EB8F610BBC704F6F17486B
-:105C9000347FFF680EEFB7EA683EBB866DC5F16FD3
-:105CA00017E8F9FC133455D86E4FE0F3F666010C93
-:105CB000FB59307DE6CBC897F664A8CF0BC2BD5325
-:105CC00078BB7D0CAF57F7ABB6FFCE66E17428F01A
-:105CD000DEAF83F57388DE697EB5FFD7459C0F2361
-:105CE000FB7B3235659E61EE23C1C6FB135FC07D31
-:105CF000B8910F3242F8A25E21BE50E950A5BF977D
-:105D00006CFC9E330D82CE4127D0FDA16E40F99AE6
-:105D1000027C20D1BDD8199C679724F825921FA03A
-:105D20004439AEF283CA072ABDA7019F4909C1734E
-:105D3000FC28825ED5F2B495E3A53B39E601C26B3F
-:105D4000A7CE02A210FA03221310BEB3C00EE34A7C
-:105D50001E35370C27BFE2FED97B50E5C108F7702E
-:105D6000DDF9F5BCFCBEE727F986721BE9761879E8
-:105D7000F5B53581F6A3D26D92CDFE5F483FFD9219
-:105D8000492BC54169E2741379FEB70BF83954FA0F
-:105D900079C9C6B8BEC4734EBC5EDEA9E7193AE73E
-:105DA0007246722F338AD747E2573D5788DC8BB152
-:105DB0001506EF93316E0F8C057B606346907E0372
-:105DC000495F2E43FDB5CDAAD0FEFEA09109FFAAE2
-:105DD0003E19AA97E425F373C2F40CB3001E070E14
-:105DE0001B88BFFD1A56F50A8C6B2555113CF76DC3
-:105DF000362E0F06174CD2AC827D05FE6E76A3DEE2
-:105E00000A8C19382BC1F8C0563040C87EB0FF58F4
-:105E10004A66EC7ED029A897AE809C63598CC9DB7A
-:105E20003E3F2BC1BE976D9319DA350110DB328CE2
-:105E3000733D19E331F2718CC1B83A31AE79EBA7F9
-:105E400077217D9D07FA44FBE62353FD040676CFB8
-:105E5000EC6D3ABAC765317A0FD61FDBFAC48945B3
-:105E6000009F6F9714B4374A6533B5D73C2F7B70CA
-:105E70009D3A73E94509EC9C407BCB535150EFDCD4
-:105E8000AB63261857DA2E59FD30FF726F0CDE0C0B
-:105E90005BB645F77E5F76506EDE26F458D52EC988
-:105EA0000314C3AAB687B7D7EC0A87EB983608C3A2
-:105EB000FCB36C318964FF4D6636B4FFD896045448
-:105EC0005643723B92AE506D237EEC8D5C1E33F6D2
-:105ED00059F21D4097F2E1CFD3DF377378BE80CF00
-:105EE00001FCC9E7FCFED57BAB1732FF93D1ACC0F8
-:105EF0000BE7AC3F6CB2B8E160F51D329D23E08D3D
-:105F0000A37B7645F5DD4E7C7A48B6A01DB6C12749
-:105F1000BBB1DDD969DAA98173D61F9018DA9F4E1B
-:105F20009FC1C3EFE9EA326C5FEE3359146C3F64F2
-:105F300060328C0F00DE4C88C7717D847FC42BDA01
-:105F4000A7F0F763A928887F19F19518C457F3566D
-:105F5000BE9FF37B397E4AE5D55AC2578BC4524265
-:105F6000F0FC67CD8B43F8C27EB3B7FDB50BF1BC37
-:105F70000CF6675010EF32E1F93CE007E7D51FFE61
-:105F800028BDCF1CC4B70CF8FEAD3A1EFA2FBF01D6
-:105F9000BEAB987B1DDA73DF17CF69C8FF4964F782
-:105FA0009EFF03DABD31608F23E908FB38A9B6F7FD
-:105FB00078222C589170D9B902EA27A5BEC232C105
-:105FC0004E90E21D8F225F9F9DF39747101D3D73FA
-:105FD0005FB4215D34EBFA5A9F860A777CB4157959
-:105FE000B03F63FEF6D7609DE2842FD3F723BFFC5A
-:105FF000C96041727A42F023FE1901FF4EC6EF1BC1
-:10600000F0780ECFEFEC34F80D708FACBDC43E6469
-:106010000F4C407DECD5A39C2AD10F54AC407B1C87
-:10602000E6C375242023E4EBDACE3F9F96609CA460
-:1060300024B2C5081BCD7E19E769D35D193A37CC68
-:106040002359FE42FDDA6C13E8FC13537EA4A0FC36
-:10605000695EC81C5113BF4DCE3392F3CF0A7F65E2
-:1060600044FB6F0479AFDA7DCC3D361EF90BEF822D
-:10607000F30F973BCBA733F127F842C0556BDCB148
-:1060800046E8BCFC666B2A9EFF63A4B358A4BF53CA
-:10609000DA51B0AFBA5689F0568FF483FE15EA375D
-:1060A000A8EFF70A39F27C77F1A8442C252B702A47
-:1060B000ABEE94AD7E68AFF6717ABA8E6E84FCA8B2
-:1060C00069E3F2E33A3A6A0338C44EAB47BA526125
-:1060D000C0F7C9A0FC987A0DF6FBF23426F4955B64
-:1060E000D05B4E5C1FD0CB2053E22C39217A4BE29F
-:1060F000F6962A576EDA0AA23E64DDC91E23D386BD
-:10610000AC7BF35E4B183CD59B1AD6FF073E25AC03
-:10611000DDE6CF0E6BCF3F610D830BBBA787F59FED
-:1061200076DA1E06DFD25716D6FF8717CAC3E0C13C
-:106130001C38CF3076C7901E4A95C2FACF514C61B9
-:10614000F3CFCB8E0F8307CDE27E841DA8DAA75F45
-:10615000D8B81D1459AAF7FB136BF83AAA5FFCD301
-:10616000E9E1EBCDB787AFF75DF1B21BEC7E2DD83F
-:10617000F57B413F62F902D8FF5AB0EBDBC0FE4726
-:10618000F825B0FFB1F482FD8FF5AF80FD8F703B35
-:10619000D8FF081F047F05615F531995879ACAA924
-:1061A000FE46F7D725D63D21D63D29D6FD47EF49F6
-:1061B0002D9D6593345F009FCE4CB8A847396C6F16
-:1061C000EC2BC538C0C05B32DB810CE2F09C684A26
-:1061D000447D348AA1DDC2CA07DEC63845FD818907
-:1061E000968D0AEAA1FF7C07DB03EDB282F2FCA8E0
-:1061F000EF83589CE7CA17C087F938EE8358F48FAD
-:10620000EBBE64046F847605E039FB4130903D03BA
-:10621000720DFB67AAB047CFA02C6FDBAF477CD4D1
-:10622000EEDD4FED6F7975E1ED7B5BC2DA2DD81FA6
-:10623000CA5AAD87FCFB4B3E753E3FF5AFCB94ECA5
-:1062400068175FDAFB9FC9CBB05FDBBBC9F77DCBBB
-:106250007D7F72F0C51C94EB4ED0C37E73701E67B9
-:10626000874EC07CDF7599FB4B135011B4496C12FB
-:106270001457D826B60AE45DADAFB50EE5506DF6FD
-:10628000221DCB207924E20D206DD15E42E71EEE67
-:10629000EF8AF7D3D8FB60DE37BCC76FB723FE3A6F
-:1062A0008FC5E2BAFDED72983F73771EB75BEFCEF4
-:1062B000D313DEAEB41F8B55A07D83F718BF6FAD2F
-:1062C0009FCE7D54C0FD50D23DFB643A77F5171A3E
-:1062D000BA7F75BEFBF3649A678E6F520C9EABC794
-:1062E000CBD773E529B4CE9CCCA595B8FF93A90B69
-:1062F0000B65B2F34030A35C9D32AF15E303B55E8E
-:10630000D93E9CBFB546CCDBA5E374F856E6AB5D41
-:1063100063803E4E968DB291CC17FD7E93C7EDF112
-:1063200052BD2313F5428F5989413A7EB86C620CF5
-:10633000E2F52896585FB653EF80B2A69DAFD763BB
-:10634000E98E457AEB69CF97D16E51E75B89EB1601
-:1063500086D0F510DEDC84A72A4F8B19E709E28F7F
-:10636000D7BBF2B81D7ED2F3EE5D68A7F464475B3D
-:10637000112F5D7A46FE6D2DE015F5414F675A0BE2
-:10638000DE83BA9E4BE0A33F5B43780DF874A2DF37
-:10639000A25616D64FC7F1B52B7C3F16CFB97F5BFF
-:1063A000847AE959B0ABA1BA4ED7908CE7FF787BDD
-:1063B000F8FEAAC43DD7E9FCC9C921F45AD731C4B3
-:1063C0002F66A2EF0E953F14C2A78AC79E6C6EB7C8
-:1063D000F5A41A3CE82FD6ED6F25BABE3EBED39D7C
-:1063E00081767EDAAF8D1437BC913FABDA01217E26
-:1063F0000F433F4E5736B1503321A8EFAFD9EC2FA2
-:10640000E615A23F544EFE5E0F1B5886CADF897602
-:10641000701CCADDBF3D85EB0EB683BD07EB3A8D20
-:10642000BEB91F829D35680546817D0F6ED7798480
-:106430007F6246FB7499B04F3F561C4532E857E7E0
-:106440001A0D9DAF2E278ADBB5424E7EB23FE3A7E1
-:1064500048AF7527648B11ED50F05B086EE3764111
-:10646000BD37E3DF67A0BDDDA6233B40B53B9CC243
-:10647000EE382FECD9F36B06F464AF1E96D813B048
-:106480008F2ADFE6AE346877E6CC257BD529B75175
-:10649000FC71F9D670BBA0DA130ED7EE0D879D11F3
-:1064A0007683EAB7F5E40DD90F93D1FF289167A45D
-:1064B000201F7C2CF0A9FA232BA75A5390DF3768B2
-:1064C00095B96A3C00EFC975F8D56ADCAFA72ECA4A
-:1064D0004A7EC1AA43749FFD9F71BFA33F9571FB84
-:1064E00088F17BEDF771FA76E924EE6700B9D27C8A
-:1064F00046C9B3069AFADD83B12497182B437E6808
-:106500005CC8FD483BC65CA1DC9727E24511FAF266
-:10651000566D9F1C1F221F3ECB9B40FB2FD633077F
-:10652000EAA9953156D25BE38DDCDE2E59EDB5211B
-:106530001D8C07FFD81012CF1E6F1E90B0DFAE87E4
-:1065400078FC5CF5EFE76B2DBAF810BD0792276C6D
-:106550007E90247CFC8DE6B7C0FCE6E0FC70DF7129
-:1065600078DF9F1658491FA7CF67AC9BF8B181F819
-:10657000513DCF15A0B362A0338C9920DEEAB61F3F
-:10658000A138B09375933F521ACBF7518AFB41382B
-:106590008A97967C2E37CAF3F9BD350B58955B6FF9
-:1065A000E5DBE3F3A1DC9BEF48CAA77A0BD1E54A10
-:1065B000412B60A7A4F40D23771BFFC2FDAA4F81D6
-:1065C0000F90CFEF699094CC303B88D3B78B57B105
-:1065D000CBCCDB3B03EFC16DEFCE4E463F8AF3D50C
-:1065E0009255262533844E5D48E7702F5596EA1F55
-:1065F000A3DDED5895AC60BCDF85743F01AF91D34E
-:106600007522FC43FFE23A3AF786C3F0B71DE9ABC7
-:106610009E19ACA8475CBEC876AB16E33AF9F9C040
-:10662000073707F9205DD0658B43F2A0DC6FF94A8C
-:10663000CBE3588B258A5BDD09954897F487FDAA43
-:10664000667A70FE3B01447F886D4924BEA1469066
-:10665000233F17E7BD53EB3F827C7C5CE7CDC078DE
-:10666000CA7127CFEB2C646070807C59CCBAA9EC3E
-:106670008DAE3FE0A7C9DDE3D06F7ECF61A0384E7D
-:10668000CBDA1D31284F73D95ACBF96C54EE6CEF2D
-:10669000B5FC91ED0A2024765EC50BC5853611FE4A
-:1066A00055BCEECDB7CF47FC8F34BEF6AF076E4773
-:1066B00097A2F681567D0A279BEEECA220FE5CCCC9
-:1066C0009B8DFB55F135843FD8F358B887056CA0F6
-:1066D00008FD1A156F46F8371CDED4FB4CD70DFCAD
-:1066E0000CAF0CF412C997487CAAF75BCF1A743C24
-:1066F000CED5F0CE42E87FF75A8D82F6E175F8BD2F
-:10670000011EFC26DEE48F91C8DF1C092F2A3E54AF
-:10671000FC9C8EE7E34EDF23539CEEFF355EDECA22
-:10672000773CFA6DFC18C97F23F1DB9255117C1977
-:10673000C17F2ABE1CAB6289CF543CD6298CFCD6C3
-:10674000BACE18AB8705F167867F883FCC53503CA3
-:10675000A65D62CF48DF850FFB28AF11891FA00D12
-:106760003BCAF59D11FCA7E26D24F9A3CAAF33CC57
-:106770007FDC22517E80F3E7AF0C1ECC2FAAF901FB
-:10678000350F704CC8BFC8F20CD81D9877D998DD6A
-:106790009384F65AAF5E9D87E71FCFACE91EB70220
-:1067A000C69F99C9CB5EB4D342607B148FC39D1939
-:1067B0006D70E3BD9D9126CF423D7E46FAF5ED1CFE
-:1067C0004ED12B082F4C996501B857A7C6ED1E1660
-:1067D00072D843E59985D38AA99FC4DEC4FB5024AF
-:1067E000564EEB48524219ECE7CC0393F29A59F01B
-:1067F000FCAFE4737BD62BE4F9501CFB3712C5B118
-:1068000097800AB060BC7DD6D36513A0FEEC8313DD
-:106810006D94FF6B0C5F1FF56806C50737D37CB717
-:106820007E31A05B9A13DCD790FE2BBECAEB2B27E0
-:10683000913F512570684F98CCFD58CFC438D4474C
-:10684000AA7E1A3CF1AA39347E7911F417D387C095
-:10685000931F4F0FD56F4776FF3E0BE7A9D2BB734F
-:10686000AD507FA1E50FE9680754ED7E348BECD283
-:10687000DD1BB2D0BFA8DAF1FB2C3BC1D10EF26F09
-:10688000B4FCDC97F7DDB27363881DFC6021F70B65
-:10689000161B8F94A07D3AF7E64F1EC178F8A40727
-:1068A000258A8BDDC3BA1F41BD5991CDF9886D3161
-:1068B000925C87F928EFD83AF927BB509E9FCCFE0F
-:1068C000405709FD4C055ABA8F0AE6792C05E36159
-:1068D000EB258A8705FB8FA33CE6D2B5923E3511A6
-:1068E000F561BC4D56705C3CEDE3DEF5B62EACAF09
-:1068F00058CDEBE71A3CED3D38CFD37A6BAB821322
-:10690000954F280FC90B9B0AB8DFB5E43189EC71AC
-:10691000759D494F25B7849ED35420F4F98C6EE2BF
-:10692000FF9F0ABCFC78F5BB6FA62A984F72C4156E
-:1069300040FB3B4F9ECF44F9559C703107E97C9258
-:10694000DEF14C359E7B8781E28705B969720AF4D6
-:10695000CFFBE5CC27B05CB27AE933D51807DD6A06
-:10696000243F4ADD5FA3A468D0DF3CD6F28B7BF1E5
-:10697000DE2E3C69243BBAB1E5A614360C9FAAE58D
-:106980001EC0BF92C5D8F34D462A5F6CB230058E4B
-:10699000B8AF2995E0979B142AD9024E5F8DC25F4C
-:1069A0001D69BE7CF0F715905705EB613EB0376D61
-:1069B00026FB143CE7A429CE1D1BC4B926C1789B35
-:1069C0003B6336DE43C186155D688A2617F0FCE21C
-:1069D000DB3DEBD3C98E5E7DEEB96A685F5A509E8F
-:1069E0005F00F76DDC7E95FCFC631D8F56505C7F6D
-:1069F00087819F4F9CFBC2935929CF60DCF52D1DE9
-:106A0000F9DFAEEDE79EDB00E57D8FADD087D2FBF1
-:106A1000773DAF4DECE7467C35D23D7C7FBEFA7DBD
-:106A20003AF1CF0EE0AB9C7F9CAF5CABD7D0FD3D85
-:106A30005A507E37DEFB059D3B1DF9E9C2E41F116C
-:106A40009DBB0F4B74FFAA1C57C72F10E7ADD5781D
-:106A50001F237B50C8F1CFC1F3C3FB3DD2F17116A8
-:106A6000DAC39FFB167EEBB90F3661061DE35A466B
-:106A70002A23DB8BF48E8956385F9186DBC191ED3A
-:106A80000F17A871719E6FC73F8C0BD709FDE98462
-:106A90008DC525A0FE93FC51B998E7B8EDA216FD6F
-:106AA0002FF0EBDE0FB72FD9FB217A7CA4FDDEA8F7
-:106AB000ACC779B441B93BEDB486F943F4F62D7D0A
-:106AC00051CC1FB2EE90DF01757ACCB3748C26B92D
-:106AD0008078C3BC4CA063F20E842FEA391E0307F2
-:106AE000C1BFE27115261705CF79B1E3722ECAD95D
-:106AF000C8F3D61FBA4CF451E77BF4AA44E79F735E
-:106B0000519B7BE3F31FD97D3917F17751D7578418
-:106B10007E5440DF978B78A87F9DCBF3EF7B0F6A85
-:106B20007DF57A3D8FEF4916F2074BE42BE4C7075A
-:106B30004E703FBEBE6327C9D3C14E1E4F7169BAA6
-:106B40004B5330FED070AE0BE5D9602AF7AF607EB4
-:106B50003BDEDB8C89420F6A07D2E7835C3B2AF27B
-:106B6000B5AA5F7701F9578FF378EBE83D526E34A1
-:106B700043BBE212F233D457ACCA5887747EC19338
-:106B8000849120F676EEFFD453FCED8D688B4C7625
-:106B90002BD486E06FE81C1E993F9C61AA9F1ECDF6
-:106BA000EC21FD5C7AE5A7E41F9FE47932D714CE8F
-:106BB0004FEC10E727E7DA23FAD490F95E52E58725
-:106BC000B01FE7BEF13FC497A76CF65328CFA25180
-:106BD00016E27CA9711E4912FD8A82794073A7F0E2
-:106BE000C7CB646A77F964361AC7A4C650BEBE8C98
-:106BF0006DD2A2BD3B977967F077327DFFF643688F
-:106C00009FF7869C8FEFB1C07EA6FC71699423B379
-:106C100011ED238D24EED55B303F549F15727B6BB5
-:106C2000862C911E1B181D4D76CA9C05CEC5B85FDB
-:106C3000B55F9996EB339887EC2CE619C8C57C268E
-:106C4000F30FE4629E53ED77D71BD10DA41799B7CC
-:106C5000E0AE9075C61472BDF929E69F419EB84416
-:106C6000FEB344FEEA29F4A31A0FF33C61AF26E316
-:106C70003D7CAFE5867B46BC5E06BCDA51FF3898AA
-:106C8000DD8EFC3335C983FCE3DA27317CB756DF70
-:106C900061D881719D7A5D5F32D2F306DF5FF5487E
-:106CA000CFAE03EFEA95A9389EC781C05ED7E0FD5D
-:106CB000BA84FE72FA6E7A0FE36ECE135C8B3AB52D
-:106CC000EF925F5FDBBE9FFCF73AE627FFBDAE2D7C
-:106CD0009C5E0653799C3D923FC6142A617C3167C5
-:106CE0002BE78BBB64D680728E89B8E99CD414B232
-:106CF0004782E3849D285F7E04ED97FE09925582CA
-:106D0000A9FAA3DC6BD12E7267717BA6FF4F2F16F9
-:106D10002C23B9E229F819BE8B11F6EE9CF59BB530
-:106D200072C87EE674F238617F14AB3A48F8768C0C
-:106D3000453CA4E7958F2DE4EF6472E99D8F86C7EB
-:106D40003523CFF1AC88E39CC4384F4E70DFF3D2CB
-:106D5000D2B81C631EA29F2E0D5F5F7DF7A28E5FCF
-:106D600021E869C81F92787C6A24B98279944A9193
-:106D700047A91479944A9147A91479944A9147A94B
-:106D80001479944A9147A91479944A9147A914799E
-:106D900014AC3F895BA5F7703B9F417AE8421E1B0C
-:106DA00013847B1322E031E1FD7B13A470788C44C3
-:106DB000FD8B0B773EE3CEC138A645C8252506EDF1
-:106DC000AF0B261E5FEA8871CC2D84FACA39CDBB81
-:106DD000F97B443BBD67294E58B818F96B30D1C0D8
-:106DE000500EB90B1DF3111F274ECCCEDC4CF2D147
-:106DF00064C53C77EFDD37C7515CEE2D99C9B0E42F
-:106E0000CCECFCB50500CF344B44B720277E50AE08
-:106E1000FA9330CFEC4E9ECF2891EB2A71FEC6D16B
-:106E2000A67C8A6BE53B161586C40F4AC72CCF4457
-:106E30003BA84BA7BC87F154F75F740CFD2835FEC7
-:106E4000A6F6EBCD9B598DFB9A933D716D1ECA1B27
-:106E5000602E946F763D6BC37DD935D15233C92BEB
-:106E6000458BFC5F2DF03D4BE1F6B05FAF6813D072
-:106E70006F8F9A99E85678BEAA52E4AB2A45BE0AAB
-:106E8000F1730AE36650BE03F55876433D9691EFE1
-:106E9000B9761794AF24BA6503E9A1EFC1E6225F82
-:106EA0007139938EF4FC8288C367178A7769F9E594
-:106EB0000FF2715E9AA756C4DF2EEBC2F378EAB8E0
-:106EC000E07846E51D3FE0F299C5E9F97BD7B1CC02
-:106ED0008DEF69EF786D34C593021E8D5B17073017
-:106EE000F038CA2FF61AF76F592AE7973B5E4DA183
-:106EF0007ECD220EEA4CE8CE4A40BD2BF84A850FE3
-:106F00007EC3DFF938F30086F275899FCF79477722
-:106F1000563CC001C9A4C1F8B873076FEF117CE7F4
-:106F20009C20E613E761466F3AE2A3FFF06BE9F7B6
-:106F300002BCD1EC5FC6E5BD3F8BE434F367E17B77
-:106F4000A1CB92F72CBEB7FDF5C17F5984EF6B2F13
-:106F5000EBBCCF21FCDB8333382CED3F6B096D4F4D
-:106F6000F2A6E37BDC5F1FFCE1227C9F7B3969FF9B
-:106F700073F1D61058F7CA596CD73F3C635131F4BE
-:106F80009F67F09C6842BA7999D39769DF81F3785B
-:106F90003FB51DDC5E9FB5EFC09557501F1F88A100
-:106FA0007CBDAF3083EEBBB963CF63486F81FD3AE0
-:106FB000E2838D6D7F7DEEB7D4CF40619479066F0B
-:106FC00001865CDC457FBB1BF7352FDAFB19C29BC2
-:106FD0008B6EA37DCE1BC5F9F9A9A2B98B903F0397
-:106FE00007F6FD0AF96F5E1C18B2B89F174D849F13
-:106FF0009A572717631C2010D35D81F3D7BF60B069
-:10700000229DD6BC9A320BE302C70B797CBA7ACAAE
-:10701000A674D4AF9A43CFEFFE2DC6295F30517EC0
-:10702000C695C0EDBB1AB9A56805E16FE76E7C3760
-:107030001278DE4479D26A9803D7ABDE3D89E2EA62
-:10704000AF7FFD4105E2A144DEBE1BEB3FDB65D215
-:10705000E03DF4E8ED713F423EECD1919F592DE0C7
-:10706000EADE517C3FD17DA584BFC44DE9A85F6BAA
-:1070700046FDE676DCF73C79D373E8E7B03D06CA17
-:10708000155C7C1EEE0DC65D6CD5D12BD5C0F331E1
-:107090005AA497CBD2A68A6770FE56DEEFB2691368
-:1070A000DDA7BBF52686EB413F86F2EAB2B439ACE8
-:1070B000FE62EB9E5CF4432FBD308FFC5195CE55A4
-:1070C0007EA9D96508D387240992C57B0952B36E7E
-:1070D00066063D5B2DC04B07B7059E61C1F197DA8F
-:1070E000747E3DDC51B581ADC5F7C12A3FD4A4DD26
-:1070F0005686E7ABD1B464A1BD529DDF57817C7148
-:10710000D1C48CA9F88E4EE8AB9AF635F3D1EE1DBA
-:10711000693FB1E25DDFE7820F3FF7993CA1F9C11A
-:10712000C8F26F4D4C3915F26EF89E0603D9EEEA9F
-:107130007C6FEBBD75E89FD52770F97116FAB781A2
-:107140001C331771B9B76455787FA988BF4BACD78A
-:10715000F765A1DE53E7FFA650956B7D5928AF2256
-:10716000C7CD9385BC7951227953D32E9D93E19E4F
-:107170006A8C6E0FBEDFA94167929F537B4DE2E39D
-:10718000528BC4BDC3D8A78B3268DD9A3693DD0419
-:10719000E36AA3FA62D11EAA8BE98B453B277048AC
-:1071A000663B04BA1293057E26089485C41DABBDC8
-:1071B0003ABB2977183CA3DD84EF73F0BF61FDB6BD
-:1071C00022CE2755BE685A8F59FA8A904EABB687A1
-:1071D0008FC3735942F82FE0DB991CEA8FDBC4BEE2
-:1071E000FBA573C427FD5FBF9F8E78AFD1B0B59864
-:1071F00047BC24F1EF1E00A6EF1E2E897C64CDDF74
-:10720000CD51482F973EAF23BE0D487D24D7CE1CCD
-:107210005C407229A0EB23B9D6535441F22110DF10
-:10722000578172EACCC17ADE3EBAAF4281F64E8413
-:10723000B17D1C237D7FB9E801921FF364FEBE81FE
-:10724000EDD459781C687D6F13F9153A25D4EFBE3B
-:1072500052A4E66DF4C173CB41BE0930655F3BF2C9
-:10726000619599E239603FB5BD8276DEC2642BC676
-:10727000C5AB701CA7037D68FE2F31E1CB65889FED
-:1072800045718E3B8B308F9DD347FE035035D9E936
-:10729000F57F32901FD9AF1BD88D722A37CEB1B08F
-:1072A00008F651A7EF5E87A1A72BBABE2ECCFBCD67
-:1072B00095B93C627B385D057276F2EF2444FEB0EE
-:1072C000BA88CB5FD05BAC05E942E2F83DE67BF5DE
-:1072D00014CA9540F74492C7917C73D1F7442CCAE5
-:1072E00087D3A0C7DD217EFEE9A57B284FBF00DF45
-:1072F000654079EFDA707A18FCEA67E4EFB1C742CB
-:10730000EA910EB784C3917484F4E80F933B6EA2A4
-:107310009B3D82AF6A6775D7E33D0CC177002C8730
-:10732000C04723E088FEAC9CDB097BF0BF61DEBA7E
-:1073300071FE5EF2CFF7F177B1CDA0BF083E104DE0
-:107340007963CD3ED04F895C3FA15EA88DEDA6B894
-:1073500054E08081F2230F777C4CEF19810E29FED7
-:1073600052DBF15A32FAED3EF41392480F26D33B2A
-:1073700095031DC9E86FA8F5751A6F96788F4F763B
-:10738000BA5AEF94FD59B8FF5AA93B17DB7D851611
-:10739000D11F60196146E7A89338BFB30E99E4790D
-:1073A00024DEF60A7A05B9904BEF2C0EF1B8802A4C
-:1073B00007AA853C398AF5399CEF2D6A5E49C2F7E8
-:1073C00072D1C3CA879B8A547BB881E236BB8A14C8
-:1073D0007EAF623CCDCBE34AD45EFFFAE5DC0939EF
-:1073E000384E11E342E4D0C4A05C41FE4F25FE7F3D
-:1073F00058970CE7AA794EB236A39C5ABCA614BA89
-:10740000B3E5DA15A5142F13EF3F23F7154947F617
-:10741000228EDF1A4D7C4962C87C97C05D4FCD2318
-:107420003943EFE8EF4F7CBC14E313BF58BC99E835
-:107430007948DF84F2399E673B97E3C836D734D763
-:10744000D3F1F286967529C3EC23729FD58E96D21E
-:1074500064E5FA7A75BF974CEAFE66E99242EF61FD
-:10746000C19AD22428971BFFD17BE0E7BDD461F0FD
-:10747000A35EAD5EBC625DDC3074739D3ED81EA21F
-:10748000BF26207E3D94D71869FF91659DE4EFC526
-:10749000381103BE6A25FE027E09D10B6542BF0E7C
-:1074A000C51BAA968E47BF9339968E473D037C55E0
-:1074B000611DC6AFC42F4B34F476C34D65E47E3EE8
-:1074C0002BE271D2B222CE2FA76CF66F50BE8EF493
-:1074D000BD85619AF4ADDF5BA46906DF417E4B4B4D
-:1074E0008E51300F54323B9AF73B6CB260DCA6FFF2
-:1074F000F09714D7ED7FC4BC80E70BCC6C34B47725
-:10750000A54EDD11AA473CD3385F461770BBC59521
-:10751000ADFBF6B8504ECC505C88EC869C68CA93A4
-:10752000047C9F92DEEAEF2CB4603E23D00DDE2176
-:10753000F093EBEBFF4A46FD1AE8FC88DE8305BEBC
-:10754000FA98DE896D10EFF48EFAC43BAB6E258697
-:10755000BE8B2BFBA014FB6D1465303EC0E35A6A52
-:10756000A9FAFF21FEEF946985C3FABF090E73687B
-:107570005C4049192E8E121A17C8D4F2B80096181A
-:1075800017C8CCE4710184312E8025C605B01EE3F6
-:107590000208635C00618C0B208C71012C312E8001
-:1075A000F59F89EF1FFA4130F178A599E4FA4A7CFA
-:1075B000DF0EF7B7F230CF3BAD6C95297F8BDF3F05
-:1075C000A07EBBEEDD4CBB7837E3DD4C793CD701C8
-:1075D000D98A2872E9068E631CC7B55FB2AE41B97D
-:1075E000D2B480D6DFD059F8DE62AC6FD559350AF7
-:1075F000D111C7638B44EFF46B3A5B29EE549C7254
-:10760000584FF56D12C338E95D06EEE73A65A8CD2F
-:10761000A33C28D9C14E4337F91FB57B25A532F4C9
-:107620009DC6F4AB2407D47CF232DEC49C5E935238
-:1076300039CC3B90A177E7E2DDF432CC33E37B71C8
-:10764000F92B7AD7EF04877414D2E156FEFED902E3
-:10765000FF88DF23DE35D574EE5F87EFA122F3CDFF
-:1076600043DFD345E49DEBA789BCB28D7F5F51F624
-:1076700064E5BE03B0DEE02603D91BEE42C703D3A8
-:107680009230EF6FA7F8C8F1C326F28B3EDC7C5333
-:10769000587C84E53B1E9C46F9F9B114AF68D44987
-:1076A000A48F67974D4CC17B9C7D42477AA737AF2B
-:1076B0007C35F66B9CAA503CAAC4C01EA079C47B42
-:1076C00029151F25CD924703F05266A577F64BE0AA
-:1076D0009A305ED9AF33AFC7774D4B187FE7A0D252
-:1076E0004DE36689E8060304789F15E23E9774FE31
-:1076F000F94B7CC7709F81DBAD691A9EBF4EDBC81A
-:10770000DF33DCCF1C7AD4B3CB91BA64D28F7FEA5B
-:10771000837A47F4D8746E972B2938FFD2933A7A3C
-:107720006F5B92F2932C07E9E9627AC720F917C9D7
-:10773000D76E1E997F22DF311CD771B902F748FE40
-:107740005017D225C5651C549E6CAAA2F277E27B25
-:1077500088EBDFFF0F9C453F312D25C68A726EC432
-:10776000EFDDA2BEFD7BAF17C4FBB5344D4FBE822B
-:10777000F7F177B315EF437D2778CA56BE1FF16442
-:107780008F656E0B7D0F061210EEB5140F22615C33
-:10779000DB6BC7EF8E060E4B167A977C9D7CDCFC6C
-:1077A00008BE1371654A1649C1F8F7A69264D877E6
-:1077B000E9840CDAB7CBC7E3A37443C9183FE7F8F1
-:1077C0004ACF731C9B5618AC9F27F82600FD399DA5
-:1077D000FCD083F4F61DE2A6BBB0BF9B99E87B6AA0
-:1077E000FA83FDCCBB791CC54F55BA196C4BD981B6
-:1077F00074F39E90FB8B17BFAB43FDDF9BEFE8C19B
-:107800007D54545E7D2499CE377CFC4A7DA71E1999
-:10781000BF0A959FFF3FDEA79F6A6AA0F29DA6550B
-:10782000547637B9A93D44FE5F1A41FE47C63FAFC3
-:10783000227F47C63F99518923FD09FCCDE3CD1135
-:10784000F1CEB251F7AE87FB9BBD456FC52A35FE21
-:1078500089EF87579A491EFCF7B461E39EEABD9908
-:10786000294E3AC84C7978FFB3B2276A35D0AE9D1D
-:10787000CEF1A7C61D913FF07CC81F58227F68B586
-:1078800041FE78560F2C5CC0F5BC9BF4BC89F0BA65
-:107890006E0DC80F80EF639630F97125427E80C36C
-:1078A00071377D57D56960182754DF51CE82E28B3E
-:1078B000BC61E48997CB937151DEE7E97BFFFA283D
-:1078C0007A9F7B5CBC873BBE81BF87AB64E5B4EE2F
-:1078D00030722516F171DFA881B37F80FEF7FDDEDF
-:1078E0004CF6CABAD1CB8AFE19B9724D7CD7F234A4
-:1078F000FEAE80F6DB7E57E03109F3A18DF7301B39
-:10790000E259FD5D811491CFFE1EBF2B306D7AE1EF
-:1079100077FF5D815BA78F5F1CFABB02B7FA323835
-:10792000ACFEAE001BBF7884DF15983D3DE9FADF61
-:1079300015B86D3AF71747FA5D01B027CB705C9226
-:10794000CD3E07CB34B1CFC8EF694F8AFC5D97C6F7
-:10795000B118CBD258B796EA359E02FA0E5EE3FD17
-:1079600025F981F98E9FE3794B9FB04DC90638CD3B
-:10797000E02539D99B67BF13EBAFD9EC77E13A919A
-:107980007173C42DFAF7B09FBBB13DF2DD958ACF7C
-:1079900015D3B9DC6814E58CE6E1BF276F9CCEF304
-:1079A000F237DA37ECB706D71BDAFFA6A505B81F02
-:1079B000D86F2DD6C37EEBB064E684B0EF53AFA78B
-:1079C0003337D155E3744E5F20CFE67DC8ED412AB1
-:1079D000B3B49E78B41FC73CE489C7FD8E691930E3
-:1079E000E177107F740F9850BFFF71F58009EBFFAE
-:1079F00068E7EF9523E77F793AF703B2660CD0F892
-:107A0000F168E3937D3E108FF65356D587EB28DF60
-:107A1000B27732E997F142BF8C7F6882AF0FE86D91
-:107A2000FCB638CA67B3E2446AAF31723EAD79A89A
-:107A3000F2E00185BEDB9AF76188BD33D903FB0E06
-:107A4000B3BFB483FCDD25C0784F7B750423CDA282
-:107A50007DE564FCDDE5182137D04E5B0C72C15921
-:107A6000F5E69794F7C7F1381FE66891FE7CBA41B6
-:107A7000F17D9A05FDD0E50BD674915FB875A85ECF
-:107A8000F899FBD7A1DF0CF65B587D4DE5912ED41C
-:107A900037B57BC3EB9D0D57C97F05FB2DACFE9E13
-:107AA0005F9ED3F3DF2F08AF07FCEE45BA54F17B9E
-:107AB0005CE79D8C7EDE71679495BFDFF7D2EF9512
-:107AC000EC10DF3FEFFC8F599C6E04BE61BC377435
-:107AD000FCC8F4D14CFDDDB35836F2C38D4A552EA7
-:107AE0000DFDFE899EB929BE373786E48E4BF855C9
-:107AF000F59516D2F369F546925F25729415E1A1CA
-:107B0000DF3F2993859CF212FFF7DC1E4F713C3A50
-:107B100000C2095329EF93DCCCE1812403C9871209
-:107B20004D79DD1E28DFD4847FC7FE2CCA0719F9E2
-:107B3000977F87E9D27BF977E25AA510FDDC66C909
-:107B4000BE0DBF7B6C96441CB1DA4CF9827E8C2F43
-:107B5000C279B6C47BB62D8375B6DC9943F6713F06
-:107B6000E3F2D4BD80E7ADB6C4972F5E81ED0BA7DD
-:107B700050FBC16F263E5E80F653759415EDA72D20
-:107B8000366E5F6F999F4DEDAF4BCA1A3CB7FB2124
-:107B900046EB6C99CFCFBDE5F171E2FB0B8F09F994
-:107BA000794B8B7D34E6A366591C17105F63443E06
-:107BB0006E4B06D443F99454BEF07E9C672ADFEFE7
-:107BC000EF6C0AC98FE30BA73CBE5B2135E2C7BC53
-:107BD000906B6E0CF9C1FF0BB81F749470470000D6
-:107BE0000000000000000000050207000000000087
-:00000001FF
diff --git a/firmware/bnx2x-e1h-5.2.7.0.fw.ihex b/firmware/bnx2x-e1h-5.2.7.0.fw.ihex
deleted file mode 100644
index 280bbcf4f2a1..000000000000
--- a/firmware/bnx2x-e1h-5.2.7.0.fw.ihex
+++ /dev/null
@@ -1,12847 +0,0 @@
-:1000000000003BE8000000600000068800003C5053
-:1000100000001968000042E0000000AC00005C50E5
-:1000200000008DE400005D00000000EC0000EAE844
-:100030000000E3000000EBD8000000940001CEE0D7
-:10004000000058E80001CF78000000C400022868D2
-:100050000000F9700002293000000004000322A80B
-:10006000020400480000000F020400540000004594
-:1000700002040058000000840204005C0000000636
-:100080000204007000000004020400780000000078
-:100090000204007C121700000204008022170000F6
-:1000A00002040084321700000604008800000005E6
-:1000B0000204009C12150000020400A0221500009A
-:1000C000020400A432150000060400A80000000489
-:1000D000020400B802100000020400BC001000007E
-:1000E000020400C010100000020400C42010000030
-:1000F000020400C830100000020400CC40100000D0
-:10010000060400D000000003020400DC0010000020
-:10011000020400E012140000020400E422140000B3
-:10012000020400E832140000020400EC4214000053
-:10013000060400F000000003010401240000000098
-:1001400001040128000000000104012C000000004F
-:100150000104013000000000020401D00000890603
-:1001600002040004000000FF02040008000000FF79
-:100170000204000C000000FF02040010000000FF59
-:1001800002040014000000FF02040018000000FF39
-:100190000204001C000000FF02040020000000FF19
-:1001A000020400240000003E0204002800000000B9
-:1001B0000204002C0000003F020400300000003F59
-:1001C000020400340000003F020400380000003F39
-:1001D0000204003C0000003F020400400000003F19
-:1001E000020400440000003F020404CC00000001AF
-:1001F00002042008000002110204200C000002008A
-:10020000020420100000020402042014000002195D
-:100210000204201C0000FFFF020420200000FFFF5A
-:10022000020420240000FFFF020420280000FFFF3A
-:1002300002042038000000200204203C00000000DE
-:100240000204204000000034020420440000003575
-:10025000060420480000001C020420B80000000131
-:10026000060420BC0000005F0204223807FFFFFFE5
-:100270000204223C0000003F0204224007FFFFFF6F
-:10028000020422440000000F010422480000000084
-:100290000104224C00000000010422500000000074
-:1002A0000104225400000000010422580000000054
-:1002B0000104225C00000000010422600000000034
-:1002C0000104226400000000010422680000000014
-:1002D0000104226C000000000104227000000000F4
-:1002E00001042274000000000104227800000000D4
-:1002F0000104227C000000000C042000000003E840
-:100300000A042000000000010B0420000000000A85
-:1003100002050044000000200205004800000032F1
-:10032000020500900215002002050094021500202D
-:1003300002050098000000300205009C0810000033
-:10034000020500A000000033020500A400000030F8
-:10035000020500A800000031020500AC0000000208
-:10036000020500B000000005020500B40000000610
-:10037000020500B800000002020500BC00000002F7
-:10038000020500C000000000020500C400000005D6
-:10039000020500C800000002020500CC00000002B7
-:1003A000020500D000000002020500D40000000198
-:1003B00002050114000000010205011C00000001FB
-:1003C00002050120000000020205020400000001F5
-:1003D0000205020C0000004002050210000000406F
-:1003E0000205021C0000002002050220000000138C
-:1003F0000205022400000020060502400000000A59
-:1004000004050280002000000205005000000007E3
-:100410000205005400000007020500580000000813
-:100420000205005C000000080205006000000001F9
-:100430000605006400000003020500D80000000665
-:100440000205000400000001020500080000000190
-:100450000205000C00000001020500100000000170
-:100460000205001400000001020500180000000150
-:100470000205001C00000001020500200000000130
-:100480000205002400000001020500280000000110
-:100490000205002C000000010205003000000001F0
-:1004A00002050034000000010205003800000001D0
-:1004B0000205003C000000010205004000000001B0
-:1004C000020500E00000000D020500E80000000742
-:1004D000020500F000000007020500F80000000718
-:1004E000020500E40000002D020500EC00000027DA
-:1004F000020500F400000027020500FC00000027B0
-:10050000020500E00000001D020500E800000017E1
-:10051000020500F000000017020500F800000017B7
-:10052000020500E40000003D020500EC0000003779
-:10053000020500F400000037020500FC000000374F
-:10054000020500E00000004D020500E80000004741
-:10055000020500F000000047020500F80000004717
-:10056000020500E40000006D020500EC00000067D9
-:10057000020500F400000067020500FC00000067AF
-:10058000020500E00000005D020500E800000057E1
-:10059000020500F000000057020500F800000057B7
-:1005A000020500E40000007D020500EC0000007779
-:1005B000020500F400000077020500FC000000774F
-:1005C0000406100002000020020600DC000000010A
-:1005D000010600D80000000004060200000302200B
-:1005E000020600DC00000000010600B80000000068
-:1005F000010600C800000000010600BC0000000069
-:10060000010600CC000000000718040000A900004B
-:10061000081807C800070223071C00002C2100004F
-:10062000071C800038930B09071D0000292B192E89
-:10063000081D685052F60225011800000000000055
-:10064000011800040000000001180008000000006C
-:100650000118000C0000000001180010000000004C
-:100660000118001400000000021800200000000122
-:1006700002180024000000020218002800000003F5
-:100680000218002C000000000218003000000004D6
-:1006900002180034000000010218003800000000B9
-:1006A0000218003C00000001021800400000000495
-:1006B0000218004400000000021800480000000179
-:1006C0000218004C00000003021800500000000057
-:1006D0000218005400000001021800580000000435
-:1006E0000218005C00000000021800600000000119
-:1006F00002180064000000030218006800000000F7
-:100700000218006C000000010218007000000004D4
-:1007100002180074000000000218007800000004B5
-:100720000218007C00000003061800800000000290
-:10073000021800A400003FFF021800A8000003FFF9
-:100740000218022400000000021802340000000019
-:100750000218024C00000000021802E4000000FF32
-:100760000618100000000400021B8BC000000001EE
-:10077000021B800000000034021B804000000018B3
-:10078000021B80800000000C021B80C000000020C3
-:100790000C1B83000007A1200A1B83000000013806
-:1007A0000B1B830000001388021B83C0000001F4B0
-:1007B000021B1480000000010A1B148000000000CE
-:1007C000061A1000000003B3041A1ECC0001022711
-:1007D000061AA020000000C8061AA00000000002AF
-:1007E000021A1ED000000000061A1ED800000006E3
-:1007F000061A36E800000004061A36E0000000027F
-:10080000061A500000000002061A500800000004FA
-:10081000061A501800000004061A502800000004B0
-:10082000061A503800000004061A50480000000460
-:10083000061A505800000004061A50680000000410
-:10084000061A507800000002041A404000020228F4
-:10085000061A400000000002061A400800000002CC
-:10086000041A62C00020022A061AD1000000000209
-:10087000061A200000000124061AB000000000281B
-:10088000061AB1400000000C061A330000000014E4
-:10089000061A33A000000068061A81080000000252
-:1008A000061AD1C800000002061AD1D800000020A4
-:1008B000061A249000000124061AB0A000000028A7
-:1008C000061AB1700000000C061A33500000001424
-:1008D000061A354000000068061A81100000000268
-:1008E000061AD1D000000002061AD25800000020DB
-:1008F000021A292000000000061A30000000000241
-:10090000041A30080005024A061A301C00000009CB
-:10091000061A320000000008061A5000000000020B
-:10092000061A508000000012061A40000000000263
-:10093000061AD0C000000002021A2924000000009C
-:10094000061A304000000002041A30480005024F29
-:10095000061A305C00000009061A32200000000868
-:10096000061A501000000002061A50C800000012BB
-:10097000061A400800000002061AD0C80000000253
-:10098000021A292800000000061A30800000000228
-:10099000041A308800050254061A309C0000000931
-:1009A000061A324000000008061A5020000000021B
-:1009B000061A511000000012041A401000020259D9
-:1009C000061AD0D000000002021A292C00000000F4
-:1009D000061A30C000000002041A30C80005025B8D
-:1009E000061A30DC00000009061A32600000000818
-:1009F000061A503000000002061A5158000000127A
-:100A0000041A401800020260061AD0D80000000242
-:100A1000021A293000000000061A3100000000020E
-:100A2000041A310800050262061A311C0000000990
-:100A3000061A328000000008061A5040000000022A
-:100A4000061A51A000000012041A4020000202679A
-:100A5000061AD0E000000002021A2934000000004B
-:100A6000061A314000000002041A314800050269EC
-:100A7000061A315C00000009061A32A000000008C6
-:100A8000061A505000000002061A51E80000001239
-:100A9000041A40280002026E061AD0E80000000284
-:100AA000021A293800000000061A318000000002F6
-:100AB000041A318800050270061A319C00000009F2
-:100AC000061A32C000000008061A5060000000023A
-:100AD000061A523000000012041A4030000202755B
-:100AE000061AD0F000000002021A293C00000000A3
-:100AF000061A31C000000002041A31C8000502774E
-:100B0000061A31DC00000009061A32E00000000875
-:100B1000061A507000000002061A527800000012F7
-:100B2000041A40380002027C061AD0F800000002C5
-:100B30000200A294071D29110200A29800000000E3
-:100B40000200A29C009C04240200A2A0000000005D
-:100B50000200A2A4000002090200A270000000002E
-:100B60000200A274000000000200A2700000000059
-:100B70000200A274000000000200A2700000000049
-:100B80000200A274000000000200A2700000000039
-:100B90000200A27400000000020100B40000000185
-:100BA000020100B800000001020100DC00000001A9
-:100BB0000201010000000001020101040000000127
-:100BC0000201007C003000000201008400000028C7
-:100BD0000201008C0000000002010130000000044E
-:100BE0000201025C00000001020103280000000075
-:100BF0000201607000000007020160800000000137
-:100C00000201055400000030020100C40000000190
-:100C1000020100CC00000001020100F80000000108
-:100C2000020100F00000000102010080003000001D
-:100C3000020100880000002802010090000000006E
-:100C40000201013400000004020102DC0000000186
-:100C50000201032C00000000020160740000000784
-:100C60000201608400000001020105640000003000
-:100C7000020100C800000001020100D000000001D4
-:100C8000020100FC00000001020100F4000000016C
-:100C9000020C100000000020020C200800000211CD
-:100CA000020C200C00000200020C201000000204C4
-:100CB000020C201C0000FFFF020C20200000FFFFA0
-:100CC000020C20240000FFFF020C20280000FFFF80
-:100CD000060C203800000002020C20400000003406
-:100CE000020C204400000035020C204800000020C7
-:100CF000020C204C00000021020C205000000022B9
-:100D0000020C205400000023020C20580000002494
-:100D1000020C205C00000025020C20600000002670
-:100D2000020C206400000027020C2068000000284C
-:100D3000020C206C00000029020C20700000002A28
-:100D4000020C20740000002B060C207800000056D6
-:100D5000020C21D000000001020C21D4000000018F
-:100D6000020C21D800000001020C21DC000000016F
-:100D7000020C21E000000001020C21E4000000014F
-:100D8000020C21E800000001020C21EC000000012F
-:100D9000020C21F000000001020C21F4000000010F
-:100DA000060C21F800000010020C223807FFFFFF9C
-:100DB000020C223C0000003F020C224007FFFFFF14
-:100DC000020C22440000000F010C22480000000029
-:100DD000010C224C00000000010C22500000000019
-:100DE000010C225400000000010C225800000000F9
-:100DF000010C225C00000000010C226000000000D9
-:100E0000010C226400000000010C226800000000B8
-:100E1000010C226C00000000010C22700000000098
-:100E2000010C227400000000010C22780000000078
-:100E3000010C227C000000000C0C2000000003E8E4
-:100E40000A0C2000000000010B0C20000000000A2A
-:100E5000020C400800000411020C400C00000400C9
-:100E6000020C401000000404020C40140000042195
-:100E7000020C401C0000FFFF020C40200000FFFF9E
-:100E8000020C40240000FFFF020C40280000FFFF7E
-:100E9000020C403800000046020C403C00000005F7
-:100EA000060C404000000002020C40480000000A0E
-:100EB000020C404C000000F0060C40500000001FE7
-:100EC000020C40CC00000001060C40D00000003AAB
-:100ED000020C41B800000001060C41BC00000003F8
-:100EE000020C41C800000001020C41CC00000001CE
-:100EF000060C41D00000001A020C423807FFFFFF29
-:100F0000020C423C0000003F020C424007FFFFFF82
-:100F1000020C42440000000F010C42480000000097
-:100F2000010C424C00000000010C42500000000087
-:100F3000010C425400000000010C42580000000067
-:100F4000010C425C00000000010C42600000000047
-:100F5000010C426400000000010C42680000000027
-:100F6000010C426C00000000010C42700000000007
-:100F7000010C427400000000010C427800000000E7
-:100F8000010C427C00000000010C428000000000C7
-:100F90000C0C4000000003E80A0C400000000001B7
-:100FA0000B0C40000000000A020D0044000000325B
-:100FB000020D008C02150020020D00900215002089
-:100FC000020D009408100000020D0098000000338C
-:100FD000020D009C00000002020D00A000000000B5
-:100FE000020D00A400000005020D00A8000000058D
-:100FF000060D00AC00000002020D00B4000000026B
-:10100000020D00B800000003020D00BC0000000249
-:10101000020D00C000000001020D00C80000000227
-:10102000020D00CC00000002020D010800000001CA
-:10103000020D015C00000001020D016400000001CE
-:10104000020D016800000002020D02040000000110
-:10105000020D020C00000020020D021000000040F2
-:10106000020D021400000040020D022000000003E7
-:10107000020D022400000018060D0280000000127C
-:10108000040D03000024027E020D004C000000014C
-:10109000020D005000000002020D00540000000884
-:1010A000020D005800000008060D005C000000045E
-:1010B000020D00C400000004020D00040000000145
-:1010C000020D000800000001020D000C00000001EC
-:1010D000020D001000000001020D001400000001CC
-:1010E000020D001800000001020D001C00000001AC
-:1010F000020D002000000001020D0024000000018C
-:10110000020D002800000001020D002C000000016B
-:10111000020D003000000001020D0034000000014B
-:10112000020D003800000001020D003C000000012B
-:10113000020D011400000009020D011C0000000A4C
-:10114000020D012400000007020D012C0000000721
-:10115000020D01340000000C020D013C0000000BE8
-:10116000020D014400000007020D011800000029D3
-:10117000020D01200000002A020D012800000027B6
-:10118000020D013000000027020D01380000002C84
-:10119000020D01400000002B020D01480000002755
-:1011A000020D011400000019020D011C0000001ABC
-:1011B000020D012400000017020D012C0000001791
-:1011C000020D01340000001C020D013C0000001B58
-:1011D000020D014400000017020D01180000003943
-:1011E000020D01200000003A020D01280000003726
-:1011F000020D013000000037020D01380000003CF4
-:10120000020D01400000003B020D014800000037C4
-:10121000020D011400000049020D011C0000004AEB
-:10122000020D012400000047020D012C00000047C0
-:10123000020D01340000004C020D013C0000004B87
-:10124000020D014400000047020D01180000006972
-:10125000020D01200000006A020D01280000006755
-:10126000020D013000000067020D01380000006C23
-:10127000020D01400000006B020D014800000067F4
-:10128000020D011400000059020D011C0000005A5B
-:10129000020D012400000057020D012C0000005730
-:1012A000020D01340000005C020D013C0000005BF7
-:1012B000020D014400000057020D011800000079E2
-:1012C000020D01200000007A020D012800000077C5
-:1012D000020D013000000077020D01380000007C93
-:1012E000020D01400000007B020D01480000007764
-:1012F000020E004C00000032020E00940215002085
-:10130000020E009802150020020E009C0000003022
-:10131000020E00A008100000020E00A4000000331E
-:10132000020E00A800000030020E00AC00000031E8
-:10133000020E00B000000002020E00B40000000423
-:10134000020E00B800000000020E00BC0000000207
-:10135000020E00C000000002020E00C400000000E7
-:10136000020E00C800000002020E00CC00000007C0
-:10137000020E00D000000002020E00D400000002A5
-:10138000020E00D800000001020E00E4000000017F
-:10139000020E014400000001020E014C0000000199
-:1013A000020E015000000002020E020400000001C3
-:1013B000020E020C00000040020E0210000000406D
-:1013C000020E021C00000004020E02200000002099
-:1013D000020E02240000000E020E02280000001B74
-:1013E000060E030000000012040E0280001B02A281
-:1013F000020E00540000000C020E0058000000090C
-:10140000020E005C0000000F020E006000000010E1
-:10141000020E00640000000B060E006800000003CE
-:10142000020E00DC00000003020E000400000001B8
-:10143000020E000800000001020E000C0000000176
-:10144000020E001000000001020E00140000000156
-:10145000020E001800000001020E001C0000000136
-:10146000020E002000000001020E00240000000116
-:10147000020E002800000001020E002C00000001F6
-:10148000020E003000000001020E003400000001D6
-:10149000020E003800000001020E003C00000001B6
-:1014A000020E004000000001020E00440000000196
-:1014B000020E01100000000F020E01180000000EC5
-:1014C000020E012000000000020E012800000000B2
-:1014D000020E01140000002F020E011C0000002E5D
-:1014E000020E012400000000020E012C000000008A
-:1014F000020E01100000001F020E01180000001E65
-:10150000020E012000000000020E01280000000071
-:10151000020E01140000003F020E011C0000003EFC
-:10152000020E012400000000020E012C0000000049
-:10153000020E01100000004F020E01180000004EC4
-:10154000020E012000000000020E01280000000031
-:10155000020E01140000006F020E011C0000006E5C
-:10156000020E012400000000020E012C0000000009
-:10157000020E01100000005F020E01180000005E64
-:10158000020E012000000000020E012800000000F1
-:10159000020E01140000007F020E011C0000007EFC
-:1015A000020E012400000000020E012C00000000C9
-:1015B0000730040000E80000083007D8000502BD2D
-:1015C000073400002EAA000007348000312D0BAB39
-:1015D00007350000358217F707358000396D25582B
-:1015E00007360000142D33B40836321039BE02BF5E
-:1015F0000130000000000000013000040000000085
-:1016000001300008000000000130000C0000000064
-:101610000130001000000000013000140000000044
-:10162000023000200000000102300024000000020F
-:1016300002300028000000030230002C00000000EF
-:1016400002300030000000040230003400000001CD
-:1016500002300038000000000230003C00000001B1
-:10166000023000400000000402300044000000008E
-:1016700002300048000000010230004C000000036E
-:101680000230005000000000023000540000000151
-:1016900002300058000000040230005C000000002E
-:1016A000023000600000000102300064000000030E
-:1016B00002300068000000000230006C00000001F1
-:1016C00002300070000000040230007400000000CE
-:1016D00002300078000000040230007C00000003AB
-:1016E0000630008000000002023000A400003FFF2E
-:1016F000023000A8000003FF0230022400000000B6
-:1017000002300234000000000230024C00000000F1
-:10171000023002E40000FFFF063020000000080055
-:1017200002338BC000000001023380000000001A69
-:10173000023380400000004E023380800000001021
-:10174000023380C0000000200C3383000007A1207A
-:101750000A338300000001380B3383000000138834
-:10176000023383C0000001F40C3383801DCD65007B
-:101770000A3383800004C4B40B338380004C4B4095
-:101780000A331480000000000233148000000001BE
-:10179000063220000000010206328020000000C84E
-:1017A000063280000000000206323DA8000000045E
-:1017B00006323D800000000904323DA4000102C150
-:1017C00006323D00000000200632500000000400F8
-:1017D0000632400000000004063240D00000000243
-:1017E00006326B680000000204326B70000202C215
-:1017F00006326B1000000002043274C0000202C402
-:101800000632DA40000000020632E0000000080064
-:10181000023308000100000004330C00001002C66F
-:10182000023308000000000004330C40001002D610
-:1018300006322450000000B406322AD00000000214
-:1018400006321000000001A002323DB80000000086
-:101850000632500000000020063251000000002037
-:101860000632520000000020063253000000002023
-:10187000063254000000002006325500000000200F
-:1018800006325600000000200632570000000020FB
-:1018900006325800000000200632590000000020E7
-:1018A00006325A000000002006325B0000000020D3
-:1018B00006325C000000002006325D0000000020BF
-:1018C00006325E000000002006325F0000000020AB
-:1018D00006326B780000005206326E080000000CE1
-:1018E0000632DA880000000206322720000000B429
-:1018F00006322AD80000000206321680000001A03D
-:1019000002323DBC00000000063250800000002082
-:101910000632518000000020063252800000002074
-:101920000632538000000020063254800000002060
-:10193000063255800000002006325680000000204C
-:101940000632578000000020063258800000002038
-:10195000063259800000002006325A800000002024
-:1019600006325B800000002006325C800000002010
-:1019700006325D800000002006325E8000000020FC
-:1019800006325F800000002006326CC0000000526A
-:1019900006326E380000000C0632DA9000000002B9
-:1019A00002322A300000000006324010000000021F
-:1019B0000632D0000000000602322A340000000087
-:1019C00006324020000000020632D0180000000657
-:1019D00002322A38000000000632403000000002C7
-:1019E0000632D0300000000602322A3C000000001F
-:1019F00006324040000000020632D04800000006D7
-:101A000002322A400000000006324050000000026E
-:101A10000632D0600000000602322A4400000000B6
-:101A200006324060000000020632D0780000000656
-:101A300002322A4800000000063240700000000216
-:101A40000632D0900000000602322A4C000000004E
-:101A500006324080000000020632D0A800000006D6
-:101A6000072004000093000008200780001002E611
-:101A7000072400002ADE0000072480002E050AB893
-:101A80000824E4A061D202E8012000000000000068
-:101A900001200004000000000120000800000000F8
-:101AA0000120000C000000000120001000000000D8
-:101AB00001200014000000000220002000000001AE
-:101AC0000220002400000002022000280000000381
-:101AD0000220002C00000000022000300000000462
-:101AE0000220003400000001022000380000000045
-:101AF0000220003C00000001022000400000000421
-:101B00000220004400000000022000480000000104
-:101B10000220004C000000030220005000000000E2
-:101B200002200054000000010220005800000004C0
-:101B30000220005C000000000220006000000001A4
-:101B40000220006400000003022000680000000082
-:101B50000220006C00000001022000700000000460
-:101B60000220007400000000022000780000000441
-:101B70000220007C0000000306200080000000021C
-:101B8000022000A400003FFF022000A8000003FF85
-:101B900002200224000000000220023400000000A5
-:101BA0000220024C00000000022002E40000FFFFBF
-:101BB000062020000000080002238BC00000000166
-:101BC0000223800000000010022380400000001269
-:101BD0000223808000000030022380C00000000E3D
-:101BE000022383C0000001F40223148000000001DE
-:101BF0000A231480000000000622100000000042AA
-:101C000006227020000000C80622700000000002BA
-:101C1000022211E80000000006223000000000C08F
-:101C2000062240700000008006225280000000045E
-:101C30000622670000000100062290000000040058
-:101C400004226B08002002EA02230800013FFFFF84
-:101C500004230C000010030A022308000000000007
-:101C600004230C400010031A06228100000000A08B
-:101C7000062286000000004006228C000000003C86
-:101C80000622B0000000020006228800000000804A
-:101C900006228DE00000003C0622404000000006C5
-:101CA00006228380000000A006228700000000407A
-:101CB00006228CF00000003C0622B8000000020062
-:101CC00006228A000000008006228ED00000003C20
-:101CD000062240580000000606228000000000088E
-:101CE000022211480000000006223300000000021A
-:101CF000062260400000003006228020000000081C
-:101D00000222114C000000000622330800000002ED
-:101D1000062261000000003006228040000000081A
-:101D200002221150000000000622331000000002C1
-:101D3000062261C00000003006228060000000081A
-:101D40000222115400000000062233180000000295
-:101D50000622628000000030062280800000000819
-:101D60000222115800000000062233200000000269
-:101D70000622634000000030062280A00000000818
-:101D80000222115C0000000006223328000000023D
-:101D90000622640000000030062280C00000000817
-:101DA0000222116000000000062233300000000211
-:101DB000062264C000000030062280E00000000817
-:101DC00002221164000000000622333800000002E5
-:101DD0000622658000000030021610000000002876
-:101DE00002170008000000020217002C0000000388
-:101DF0000217003C00000004021700440000000825
-:101E000002170048000000020217004C000000907A
-:101E1000021700500000009002170054008000904C
-:101E20000217005808140000021700600000008A22
-:101E300002170064000000800217006800000081A3
-:101E40000217006C000000800217007000000006FE
-:101E500002170078000007D00217007C0000076C12
-:101E600002170038007C1004021700040000000F65
-:101E70000616402400000002021640700000001CFC
-:101E80000216420800000001021642100000000184
-:101E90000216422000000001021642280000000144
-:101EA0000216423000000001021642380000000114
-:101EB00002164260000000020C16401C0003D09085
-:101EC0000A16401C0000009C0B16401C000009C4B0
-:101ED0000216403000000008021640340000000CDA
-:101EE0000216403800000010021640440000002096
-:101EF0000216400000000001021640D80000000158
-:101F000002164008000000010216400C000000010B
-:101F100002164010000000010216424000000000BE
-:101F2000021642480000000006164270000000023F
-:101F30000216425000000000021642580000000045
-:101F40000616428000000002021660080000042409
-:101F50000216600C00000410021660100000041449
-:101F60000216601C0000FFFF021660200000FFFF49
-:101F7000021660240000FFFF021660280000FFFF29
-:101F800002166038000000200216603C00000020AD
-:101F90000216604000000034021660440000003564
-:101FA00002166048000000230216604C0000002466
-:101FB0000216605000000025021660540000002642
-:101FC00002166058000000270216605C000000291D
-:101FD000021660600000002A021660640000002BF8
-:101FE000021660680000002C0216606C0000002DD4
-:101FF0000616607000000052021661B80000000171
-:10200000061661BC0000001F0216623807FFFFFFC2
-:102010000216623C0000003F0216624007FFFFFF0D
-:10202000021662440000000F011662480000000022
-:102030000116624C00000000011662500000000012
-:1020400001166254000000000116625800000000F2
-:102050000116625C000000000116626000000000D2
-:1020600001166264000000000116626800000000B2
-:102070000116626C00000000011662700000000092
-:102080000116627400000000011662780000000072
-:102090000116627C000000000C166000000003E8DE
-:1020A0000A166000000000010B1660000000000A24
-:1020B0000216804000000006021680440000000561
-:1020C000021680480000000A0216804C000000053D
-:1020D0000216805400000002021680CC00000004AA
-:1020E000021680D000000004021680D40000000414
-:1020F000021680D800000004021680DC00000004F4
-:10210000021680E000000004021680E400000004D3
-:10211000021680E800000004021688040000000493
-:10212000021680300000007C021680340000003D62
-:10213000021680380000003F0216803C0000009C20
-:10214000021680F000000007061680F4000000056B
-:102150000216880C0101010102168108000000002E
-:102160000216810C00000004021681100000000419
-:1021700002168114000000020216881008012004D3
-:1021800002168118000000050216811C00000005DF
-:1021900002168120000000050216812400000005BF
-:1021A0000216882C20081001021681280000000861
-:1021B0000216812C00000006021681300000000784
-:1021C000021681340000000002168830010101204F
-:1021D000061681380000000402168834010101014E
-:1021E00002168148000000000216814C0000000425
-:1021F0000216815000000004021681540000000203
-:1022000002168838080120040216815800000005D3
-:102210000216815C000000050216816000000005C6
-:1022200002168164000000050216883C2008100197
-:1022300002168168000000080216816C000000068A
-:102240000216817000000007021681740000000170
-:102250000216884001010120021681780000000169
-:102260000216817C0000000102168180000000013E
-:102270000216818400000001021688440101010158
-:1022800002168188000000010216818C0000000403
-:1022900002168190000000040216819400000002E2
-:1022A00002168848080120040216819800000005E3
-:1022B0000216819C00000005021681A000000005A6
-:1022C000021681A4000000050216881420081001DF
-:1022D000021681A800000008021681AC000000066A
-:1022E000021681B000000007021681B40000000150
-:1022F0000216881801010120021681B800000001B1
-:10230000021681BC00000001021681C0000000011D
-:10231000021681C4000000010216881C010101019F
-:10232000021681C800000001021681CC00000004E2
-:10233000021681D000000004021681D400000002C1
-:102340000216882008012004021681D8000000052A
-:10235000021681DC00000005021681E00000000585
-:10236000021681E4000000050216882420081001EE
-:10237000021681E800000008021681EC0000000649
-:10238000021681F0000000070216E40C00000000B5
-:1023900002168828010101200616E410000000043E
-:1023A0000216E000010101010216E4200000000015
-:1023B0000216E424000000040216E42800000004D1
-:1023C0000216E42C000000020216E00408012004BA
-:1023D0000216E430000000050216E4340000000597
-:1023E0000216E438000000050216E43C0000000577
-:1023F0000216E008200810010216E4400000000860
-:102400000216E444000000060216E448000000073B
-:102410000216E44C000000000216E00C010101204D
-:102420000616E450000000040216E010010101014C
-:102430000216E460000000000216E46400000004DC
-:102440000216E468000000040216E46C00000002BA
-:102450000216E014080120040216E47000000005D2
-:102460000216E474000000050216E478000000057E
-:102470000216E47C000000050216E0182008100196
-:102480000216E480000000080216E4840000000642
-:102490000216E488000000070216E48C0000000128
-:1024A0000216E01C010101200216E4900000000168
-:1024B0000216E494000000010216E49800000001F6
-:1024C0000216E49C000000010216E0200101010157
-:1024D0000216E4A0000000010216E4A400000004BB
-:1024E0000216E4A8000000040216E4AC000000029A
-:1024F0000216E024080120040216E4B000000005E2
-:102500000216E4B4000000050216E4B8000000055D
-:102510000216E4BC000000050216E02820081001A5
-:102520000216E4C0000000080216E4C40000000621
-:102530000216E4C8000000070216E4CC0000000107
-:102540000216E02C010101200216E4D00000000177
-:102550000216E4D4000000010216E4D800000001D5
-:102560000216E4DC000000010216E0300101010166
-:102570000216E4E0000000010216E4E4000000049A
-:102580000216E4E8000000040216E4EC0000000279
-:102590000216E034080120040216E4F000000005F1
-:1025A0000216E4F4000000050216E4F8000000053D
-:1025B0000216E4FC000000050216E03820081001B5
-:1025C0000216E500000000080216E50400000006FF
-:1025D0000216E508000000070216E03C0101012098
-:1025E00002168240003F003F0216824400000000B5
-:1025F0000216E524003F003F0216E5280000000017
-:1026000002168248000000000216824C003F003F84
-:102610000216E52C000000000216E530003F003FE6
-:1026200002168250010001000216825401000100CE
-:102630000216E534010001000216E5380100010030
-:1026400006168258000000020216E53C0000000059
-:102650000216E540000000000216826000C000C0C3
-:102660000216826400C000C00216E54400C000C02B
-:102670000216E54800C000C0021682681E001E0057
-:102680000216826C1E001E000216E54C1E001E0083
-:102690000216E5501E001E00021682704000400027
-:1026A00002168274400040000216E55440004000CB
-:1026B0000216E55840004000021682788000800033
-:1026C0000216827C800080000216E55C800080009B
-:1026D0000216E56080008000021682802000200043
-:1026E00002168284200020000216E56420002000EB
-:1026F0000216E5682000200006168288000000020D
-:102700000216E56C000000000216E57000000000F3
-:102710000216829000000000021682940000000061
-:102720000216E574000000000216E57800000000C3
-:1027300002168298000000000216829C0000000031
-:102740000216E57C000000000216E5800000000093
-:10275000021682A000000000021682A40000000100
-:10276000061682A80000000A021681F400000C0878
-:10277000021681F800000040021681FC00000100F2
-:1027800002168200000000200216820400000017DA
-:1027900002168208000000800216820C000002006F
-:1027A00002168210000000000216821801FF01FFCD
-:1027B0000216821401FF01FF0216E51001FF01FF5E
-:1027C0000216E50C01FF01FF0216823C0000001317
-:1027D000021680900000013F021680600000014058
-:1027E00002168064000001400616806800000002A6
-:1027F00002168070000000C00616807400000007FA
-:102800000216809C00000048021680A000000048CC
-:10281000061680A400000002021680AC00000048EA
-:10282000061680B000000007021682380000800003
-:1028300002168234000025E40216809400007FFF17
-:1028400002168220000F000F0216821C000F000FDC
-:102850000216E518000F000F0216E514000F000F16
-:10286000021682280000000002168224FFFFFFFFEC
-:102870000216E520000000000216E51CFFFFFFFF26
-:102880000216E6BC000000000216E6C000000002CE
-:102890000216E6C4000000010216E6C800000003AC
-:1028A0000216E6CC000000040216E6D00000000686
-:1028B0000216E6D4000000050216E6D80000000764
-:1028C000021680EC000000FF02140000000000016E
-:1028D0000214000C0000000102140040000000017E
-:1028E0000214004400007FFF0214000C00000000EE
-:1028F00002140000000000000214006C0000000040
-:102900000214000400000001021400300000000165
-:1029100002140004000000000214005C000000002B
-:10292000021400080000000102140034000000013D
-:102930000214000800000000021400600000000003
-:102940000202005800000032020200A0031500201D
-:10295000020200A403150020020200A801000030BA
-:10296000020200AC08100000020200B000000033B8
-:10297000020200B400000030020200B80000003182
-:10298000020200BC00000003020200C000000006BA
-:10299000020200C400000003020200C8000000039D
-:1029A000020200CC00000002020200D00000000081
-:1029B000020200D400000002020200DC000000005D
-:1029C000020200E000000006020200E40000000431
-:1029D000020200E800000002020200EC0000000217
-:1029E000020200F000000001020200FC00000006EC
-:1029F0000202012000000000020201340000000277
-:102A0000020201B0000000010202020C00000001FD
-:102A1000020202140000000102020218000000027B
-:102A200002020404000000010202040C0000004045
-:102A300002020410000000400202041C0000000416
-:102A40000202042000000020020204240000000210
-:102A50000202042800000020060205000000001207
-:102A600004020480001F032A020200600000000F1D
-:102A70000202006400000007020200680000000B70
-:102A80000202006C0000000E020200700000000E46
-:102A90000602007400000003020200F400000004BB
-:102AA0000202000400000001020200080000000110
-:102AB0000202000C000000010202001000000001F0
-:102AC00002020014000000010202001800000001D0
-:102AD0000202001C000000010202002000000001B0
-:102AE0000202002400000001020200280000000190
-:102AF0000202002C00000001020200300000000170
-:102B0000020200340000000102020038000000014F
-:102B10000202003C0000000102020040000000012F
-:102B2000020200440000000102020048000000010F
-:102B30000202004C000000010202005000000001EF
-:102B400002020108000000C8020201180000000291
-:102B5000020201C400000000020201CC00000000DB
-:102B6000020201D400000002020201DC00000002A7
-:102B7000020201E4000000FF020201EC000000FF7D
-:102B800002020100000000000202010C000000C867
-:102B90000202011C00000002020201C80000000045
-:102BA000020201D000000000020201D80000000271
-:102BB000020201E000000002020201E8000000FF42
-:102BC000020201F0000000FF020201040000000008
-:102BD00002020108000000C8020201180000000201
-:102BE000020201C400000000020201CC000000004B
-:102BF000020201D400000002020201DC0000000217
-:102C0000020201E4000000FF020201EC000000FFEC
-:102C100002020100000000000202010C000000C8D6
-:102C20000202011C00000002020201C800000000B4
-:102C3000020201D000000000020201D800000002E0
-:102C4000020201E000000002020201E8000000FFB1
-:102C5000020201F0000000FF020201040000000077
-:102C600002020108000000C8020201180000000270
-:102C7000020201C400000000020201CC00000000BA
-:102C8000020201D400000002020201DC0000000286
-:102C9000020201E4000000FF020201EC000000FF5C
-:102CA00002020100000000000202010C000000C846
-:102CB0000202011C00000002020201C80000000024
-:102CC000020201D000000000020201D80000000250
-:102CD000020201E000000002020201E8000000FF21
-:102CE000020201F0000000FF0202010400000000E7
-:102CF00002020108000000C80202011800000002E0
-:102D0000020201C400000000020201CC0000000029
-:102D1000020201D400000002020201DC00000002F5
-:102D2000020201E4000000FF020201EC000000FFCB
-:102D300002020100000000000202010C000000C8B5
-:102D40000202011C00000002020201C80000000093
-:102D5000020201D000000000020201D800000002BF
-:102D6000020201E000000002020201E8000000FF90
-:102D7000020201F0000000FF020201040000000056
-:102D80000728040000C00000082807A8000B03491A
-:102D9000072C000032FC0000072C800035790CC0A5
-:102DA000072D00003AC11A1F072D800039EF28D0E7
-:102DB000072E00001C3E374C082E3710391E034BDF
-:102DC00001280000000000000128000400000000AD
-:102DD00001280008000000000128000C000000008D
-:102DE000012800100000000001280014000000006D
-:102DF0000228002000000001022800240000000238
-:102E000002280028000000030228002C0000000017
-:102E100002280030000000040228003400000001F5
-:102E200002280038000000000228003C00000001D9
-:102E300002280040000000040228004400000000B6
-:102E400002280048000000010228004C0000000396
-:102E50000228005000000000022800540000000179
-:102E600002280058000000040228005C0000000056
-:102E70000228006000000001022800640000000336
-:102E800002280068000000000228006C0000000119
-:102E900002280070000000040228007400000000F6
-:102EA00002280078000000040228007C00000003D3
-:102EB0000628008000000002022800A400003FFF56
-:102EC000022800A8000003FF0228022400000000DE
-:102ED00002280234000000000228024C000000001A
-:102EE000022802E40000FFFF06282000000008007E
-:102EF000022B8BC000000001022B800000000000AC
-:102F0000022B804000000018022B80800000000C83
-:102F1000022B80C0000000660C2B83000007A1205C
-:102F20000A2B8300000001380B2B8300000013885C
-:102F3000022B83C0000001F40C2B8340000001F43D
-:102F40000A2B8340000000000B2B8340000000058B
-:102F50000A2B83800004C4B40C2B83801DCD650034
-:102F60000A2B1480000000000B2B8380004C4B4088
-:102F7000022B148000000001062A29C8000000046A
-:102F8000042A29D80002034D062A208000000048A8
-:102F9000062A9020000000C8062A900000000002C7
-:102FA000062A21A800000086062A20000000002032
-:102FB000022A23C800000000042A23D00002034F85
-:102FC000042A249800040351022A2C500000000017
-:102FD000022A2C1000000000042A2C0800020355CD
-:102FE000042A300000020357062A300800000100BE
-:102FF000062A404000000010042A40000010035937
-:10300000062A6AC000000002062A6B0000000004C5
-:10301000042A840800020369022B08000000000053
-:10302000042B0C000010036B022B080001000000B1
-:10303000042B0C400008037B022B08000200000058
-:10304000042B0C6000080383062AC000000000D88F
-:10305000062A24A800000014062A254800000022A1
-:10306000042A25D00002038B062A266800000022CD
-:10307000042A26F00002038D062A27880000002279
-:10308000042A28100002038F062A28A80000002224
-:10309000042A293000020391062AA000000000281B
-:1030A000062AA1400000000C042A29E00002039334
-:1030B000062A502000000002062A503000000002BC
-:1030C000062A500000000002062A501000000002EC
-:1030D000022A520800000001042A6AC8000203956F
-:1030E000062A6B1000000042062A6D200000000432
-:1030F000062ABCD000000002062AC360000000D8E7
-:10310000062A24F800000014062A25D80000002210
-:10311000042A266000020397062A26F800000022EF
-:10312000042A278000020399062A2818000000229A
-:10313000042A28A00002039B062A29380000002246
-:10314000042A29C00002039D062AA0A0000000282E
-:10315000062AA1700000000C042A29E80002039F3F
-:10316000062A502800000002062A503800000002FB
-:10317000062A500800000002062A5018000000022B
-:10318000022A520C00000001042A6AD0000203A1A6
-:10319000062A6C1800000042062A6D300000000468
-:1031A000062ABCD800000002022AC6C000000000A7
-:1031B000042A29F0001003A3062A50480000000E3C
-:1031C000062AB00000000006022AC6C40000000063
-:1031D000042A2A30001003B3062A50800000000E93
-:1031E000062AB01800000006022AC6C80000000027
-:1031F000042A2A70001003C3062A50B80000000EEB
-:10320000062AB03000000006022AC6CC00000000EA
-:10321000042A2AB0001003D3062A50F00000000E42
-:10322000062AB04800000006022AC6D000000000AE
-:10323000042A2AF0001003E3062A51280000000E99
-:10324000062AB06000000006022AC6D40000000072
-:10325000042A2B30001003F3062A51600000000EF0
-:10326000062AB07800000006022AC6D80000000036
-:10327000042A2B7000100403062A51980000000E47
-:10328000062AB09000000006022AC6DC00000000FA
-:10329000042A2BB000100413062A51D00000000E9F
-:1032A000062AB0A800000006021010080000000165
-:1032B0000210105000000001021010000003D000A6
-:1032C000021010040000003D091018000200042341
-:1032D0000910110000280623061011A00000001894
-:1032E00006102400000000E00210201C0000000076
-:1032F0000210202000000001021020C00000000287
-:10330000021020040000000102102008000000014B
-:1033100009103C000005064B091038000005065056
-:10332000091038200005065506104C000000010069
-:1033300002104028000000100210404400003FFF2F
-:103340000210405800280000021040840084924A75
-:1033500002104058000000000210800000001080A1
-:10336000021080AC00000000021080380000001045
-:103370000210810000000000061081200000000201
-:1033800002108008000002B502108010000000004A
-:10339000061082000000004A021081080001FFFFB1
-:1033A00006108140000000020210800000001A8018
-:1033B0000610900000000024061091200000004A32
-:1033C000061093700000004A061095C00000004AE5
-:1033D0000210800400001080021080B00000000184
-:1033E0000210803C00000010021081040000000068
-:1033F00006108128000000020210800C000002B5B7
-:103400000210801400000000061084000000004A32
-:103410000210810C0001FFFF06108148000000022D
-:103420000210800400001A80061090900000002412
-:10343000061092480000004A061094980000004AC6
-:10344000061096E80000004A02108000000010807C
-:10345000021080AC00000002021080380000001052
-:103460000210810000000000061081200000000210
-:1034700002108008000002B5021080100000000059
-:10348000061082000000004A021081080001FFFFC0
-:1034900006108140000000020210800000001A8027
-:1034A0000610900000000024061091200000004A41
-:1034B000061093700000004A061095C00000004AF4
-:1034C0000210800400001080021080B00000000391
-:1034D0000210803C00000010021081040000000077
-:1034E00006108128000000020210800C000002B5C6
-:1034F0000210801400000000061084000000004A42
-:103500000210810C0001FFFF06108148000000023C
-:103510000210800400001A80061090900000002421
-:10352000061092480000004A061094980000004AD5
-:10353000061096E80000004A02108000000010808B
-:10354000021080AC0000000402108038000000105F
-:10355000021081000000000006108120000000021F
-:1035600002108008000002B5021080100000000068
-:10357000061082000000004A021081080001FFFFCF
-:1035800006108140000000020210800000001A8036
-:103590000610900000000024061091200000004A50
-:1035A000061093700000004A061095C00000004A03
-:1035B0000210800400001080021080B0000000059E
-:1035C0000210803C00000010021081040000000086
-:1035D00006108128000000020210800C000002B5D5
-:1035E0000210801400000000061084000000004A51
-:1035F0000210810C0001FFFF06108148000000024C
-:103600000210800400001A80061090900000002430
-:10361000061092480000004A061094980000004AE4
-:10362000061096E80000004A02108000000010809A
-:10363000021080AC0000000602108038000000106C
-:10364000021081000000000006108120000000022E
-:1036500002108008000002B5021080100000000077
-:10366000061082000000004A021081080001FFFFDE
-:1036700006108140000000020210800000001A8045
-:103680000610900000000024061091200000004A5F
-:10369000061093700000004A061095C00000004A12
-:1036A0000210800400001080021080B000000007AB
-:1036B0000210803C00000010021081040000000095
-:1036C00006108128000000020210800C000002B5E4
-:1036D0000210801400000000061084000000004A60
-:1036E0000210810C0001FFFF06108148000000025B
-:1036F0000210800400001A80061090900000002440
-:10370000061092480000004A061094980000004AF3
-:10371000061096E80000004A021205B00000000101
-:103720000212049000E383400212051400003C10D2
-:103730000212066C00000001021206700000000078
-:1037400002120494FFFFFFFF02120498FFFFFFFF25
-:103750000212049CFFFFFFFF021204A0FFFFFFFF05
-:10376000021204A4FFFFFFFF021204A8FFFFFFFFE5
-:10377000021204ACFFFFFFFF021204B0FFFFFFFFC5
-:10378000021204BCFFFFFFFF021204C0FFFFFFFF95
-:10379000021204C4FFFFFFFF021204C8FFFFFFFF75
-:1037A000021204CCFFFFFFFF021204D0FFFFFFFF55
-:1037B000021204D8FFFFFFFF021204DCFFFFFFFF2D
-:1037C000021204E0FFFFFFFF021204E4FFFFFFFF0D
-:1037D000021204E8FFFFFFFF021204ECFFFFFFFFED
-:1037E000021204F0FFFFFFFF021204F4FFFFFFFFCD
-:1037F000021204F8FFFFFFFF021204FCFFFFFFFFAD
-:1038000002120500FFFFFFFF02120504FFFFFFFF8A
-:1038100002120508FFFFFFFF0212050CFFFFFFFF6A
-:1038200002120510FFFFFFFF021204D4FF802000E8
-:10383000021204B4F0005000021204B8F0001000AC
-:1038400002120390000000080212039C000000080E
-:10385000021203A000000008021203A400000002EC
-:10386000021203BC00000004021203C000000005A5
-:10387000021203C400000004021203D00000000082
-:103880000212036C00000001021203680000003FF6
-:10389000021201BC00000040021201C00000180822
-:1038A000021201C400000803021201C8000008034C
-:1038B000021201CC00000040021201D000000003FF
-:1038C000021201D400000803021201D8000008030C
-:1038D000021201DC00000803021201E000010003F3
-:1038E000021201E400000803021201E800000803CC
-:1038F000021201EC00000003021201F000000003BC
-:10390000021201F400000003021201F8000000039B
-:10391000021201FC0000000302120200000000037A
-:103920000212020400000003021202080000000359
-:103930000212020C00000003021202100000000339
-:103940000212021400000003021202180000000319
-:103950000212021C000000030212022000000003F9
-:1039600002120224000000030212022800002403B5
-:103970000212022C0000002F021202300000000987
-:103980000212023400000019021202380000018401
-:103990000212023C000001830212024000000306F2
-:1039A0000212024400000019021202480000000640
-:1039B0000212024C0000030602120250000003062D
-:1039C00002120254000003060212025800000C8684
-:1039D0000212025C000003060212026000000306ED
-:1039E00002120264000000060212026800000006D3
-:1039F0000212026C000000060212027000000006B3
-:103A00000212027400000006021202780000000692
-:103A10000212027C00000006021202800000000672
-:103A20000212028400000006021202880000000652
-:103A30000212028C00000006021202900000000632
-:103A40000212029400000006021202980000000612
-:103A50000212029C00000006021202A000000306EF
-:103A6000021202A400000013021202A800000006C5
-:103A7000021202B000001004021202B4000010048E
-:103A80000212032400106440021203280010644054
-:103A9000021205B400000001021201B00000000192
-:103AA0000600A000000000160200A0EC5554000023
-:103AB0000200A0F0555555550200A0F400005555E0
-:103AC0000200A0F8F00000000200A0FC5554000025
-:103AD0000200A100555555550200A104000055559E
-:103AE0000200A108F00000000200A18C5554000063
-:103AF0000200A190555555550200A194000055555E
-:103B00000200A198F00000000200A19C000000004B
-:103B10000200A1A0000100000200A1A400005014B6
-:103B20000200A1A8000000000200A45C00000C003C
-:103B30000200A61C000000030200A06CFF5C000055
-:103B40000200A070FFF55FFF0200A0740000FFFFFD
-:103B50000200A078F00003E00200A07C000000005A
-:103B60000200A0800000A0000600A0840000000564
-:103B70000200A0980FE000000600A09C00000007D3
-:103B80000200A0B8000004000600A0BC0000000372
-:103B90000200A0C8000010000600A0CC0000000336
-:103BA0000200A0D8000040000600A0DC00000003D6
-:103BB0000200A0E8000100000600A22C00000004A2
-:103BC0000200A10CFF5C00000200A110FFF55FFFE6
-:103BD0000200A1140000FFFF0200A118F00003E0A2
-:103BE0000200A11C000000000200A1200000A000B3
-:103BF0000600A124000000050200A1380FE000002B
-:103C00000600A13C000000070200A15800000800C7
-:103C10000600A15C000000030200A1680000200073
-:103C20000600A16C000000030200A17800008000E3
-:103C30000600A17C000000030200A1880002000031
-:103C40000600A23C0000000400000000000000008C
-:103C50000000003100000000000000000000000033
-:103C60000000000000000000000000000000000054
-:103C700000000000000000000000000000310032E1
-:103C80000000000000000000000000000000000034
-:103C90000000000000000000000000000000000024
-:103CA000000000000000000000320056000000008C
-:103CB0000000000000000000000000000000000004
-:103CC00000000000000000000000000000000000F4
-:103CD000000000000056008C000000000000000002
-:103CE000008C009000900094009400980098009C34
-:103CF000009C00A000A000A400A400A800A800ACA4
-:103D000000AC00B100B100B300B300B5000000008A
-:103D100000000000000000000000000000000000A3
-:103D200000000000000000000000000000B50102DB
-:103D30000102010A010A01120112011B011B0124E7
-:103D40000124012D012D01360136013F013F0148BB
-:103D5000014801510151015A00000000000000001B
-:103D60000000000000000000000000000000000053
-:103D70000000000000000000000000000000000043
-:103D80000000000000000000000000000000000033
-:103D90000000000000000000000000000000000023
-:103DA0000000000000000000000000000000000013
-:103DB0000000000000000000000000000000000003
-:103DC00000000000000000000000000000000000F3
-:103DD00000000000000000000000000000000000E3
-:103DE00000000000000000000000000000000000D3
-:103DF00000000000000000000000000000000000C3
-:103E00000000000000000000015A015F00000000F7
-:103E100000000000015F0160016001610161016259
-:103E2000016201630163016401640165016501666A
-:103E300001660167000000000000000000000000B3
-:103E40000000000000000000000000000000000072
-:103E50000000000000000000000000000000000062
-:103E60000167016C016C0179017901860000000095
-:103E70000000000000000000000000000000000042
-:103E80000000000000000000000000000000000032
-:103E90000000000000000000000000000000000022
-:103EA0000000000000000000000000000000000012
-:103EB00000000000000000000186018700000000F3
-:103EC00000000000000000000000000000000000F2
-:103ED00000000000000000000000000000000000E2
-:103EE00000000000018701BE00000000000000008B
-:103EF00000000000000000000000000000000000C2
-:103F000000000000000000000000000000000000B1
-:103F100001BE01E9000000000000000000000000F8
-:103F20000000000000000000000000000000000091
-:103F300000000000000000000000000001E9021A7B
-:103F40000000000000000000021A022102210228E5
-:103F50000228022F022F02360236023D023D0244A1
-:103F60000244024B024B02520252028A000000003D
-:103F700000000000028A028E028E029202920296D5
-:103F80000296029A029A029E029E02A202A202A631
-:103F900002A602AA02AA02FA02FA031103110328D6
-:103FA0000328032B032B032E032E03310331033489
-:103FB000033403370337033A033A033D033D034019
-:103FC00003400381038103880388038F038F0393D6
-:103FD000039303970397039B039B039F039F03A3F1
-:103FE00003A303A703A703AB03AB03AF03AF03B064
-:103FF00000000000000000000000000000000000C1
-:1040000000000000000000000000000000000000B0
-:10401000000000000000000003B003C20000000028
-:104020000000000000000000000000000000000090
-:104030000000000000000000000000000000000080
-:104040000000000003C203D703D703DA03DA03DD5D
-:104050000000000000000000000000000000000060
-:104060000000000000000000000000000000000050
-:1040700003DD040A00000000000000000000000052
-:104080000000000000000000000000000000000030
-:10409000000000000000000000000000040A050D00
-:1040A0000000000000000000000000000000000010
-:1040B0000000000000000000000000000000000000
-:1040C0000000000000000000050D0514051405188F
-:1040D0000518051C000000000000000000000000A2
-:1040E00000000000000000000000000000000000D0
-:1040F00000000000051C055C00000000000000003E
-:10410000055C05650565056E056E05770577058017
-:1041100005800589058905920592059B059B05A4E7
-:1041200005A405FD05FD0613061306290629062D1F
-:10413000062D063106310635063506390639063DA7
-:10414000063D064106410645064506490649065014
-:10415000000000000000000000000000000000005F
-:10416000000000000000000000000000000000004F
-:10417000000000000000000006500656000000008D
-:10418000000000000000000000000000000000002F
-:10419000000000000000000000000000000000001F
-:1041A0000000000006560659000000000000000054
-:1041B00000000000000000000000000000000000FF
-:1041C00000000000000000000000000000000000EF
-:1041D0000659065F0000000000000000000000001B
-:1041E00000000000000000000000000000000000CF
-:1041F00000000000000000000000000000000000BF
-:104200000000000000000000065F066E066E067DDE
-:10421000067D068C068C069B069B06AA06AA06B996
-:1042200006B906C806C806D706D70748000000002A
-:10423000000000000000000000000000000000007E
-:10424000000000000000000000000000000000006E
-:10425000000000000748075B075B076C076C077DE1
-:10426000000000000000000000000000000000004E
-:10427000000000000000000000000000000000003E
-:10428000000000000000000000000000000000002E
-:10429000000000000000000000000000000000001E
-:1042A000000000000000000000000000000000000E
-:1042B00000000000000000000000000000000000FE
-:1042C00000000000000000000000000000000000EE
-:1042D00000000000000000000000000000000000DE
-:1042E00000010000000204C00003098000040E4029
-:1042F00000051300000617C000071C8000082140BD
-:1043000000092600000A2AC0000B2F80000C344050
-:10431000000D3900000E3DC0000F428000104740E4
-:1043200000114C00001250C00013558000145A4078
-:1043300000155F00001663C00017688000186D400C
-:1043400000197200001A76C0001B7B80001C8040A0
-:10435000001D8500001E89C0001F8E800020934034
-:10436000000020000000400000006000000080000D
-:104370000000A0000000C0000000E00000010000FC
-:1043800000012000000140000001600000018000E9
-:104390000001A0000001C0000001E00000020000D8
-:1043A00000022000000240000002600000028000C5
-:1043B0000002A0000002C0000002E00000030000B4
-:1043C00000032000000340000003600000038000A1
-:1043D0000003A0000003C0000003E0000004000090
-:1043E000000420000004400000046000000480007D
-:1043F0000004A0000004C0000004E000000500006C
-:104400000005200000054000000560000005800058
-:104410000005A0000005C0000005E0000006000047
-:104420000006200000064000000660000006800034
-:104430000006A0000006C0000006E0000007000023
-:104440000007200000074000000760000007800010
-:104450000007A0000007C0000007E00000080000FF
-:1044600000082000000840000008600000088000EC
-:104470000008A0000008C0000008E00000090000DB
-:1044800000092000000940000009600000098000C8
-:104490000009A0000009C0000009E000000A0000B7
-:1044A000000A2000000A4000000A6000000A8000A4
-:1044B000000AA000000AC000000AE000000B000093
-:1044C000000B2000000B4000000B6000000B800080
-:1044D000000BA000000BC000000BE000000C00006F
-:1044E000000C2000000C4000000C6000000C80005C
-:1044F000000CA000000CC000000CE000000D00004B
-:10450000000D2000000D4000000D6000000D800037
-:10451000000DA000000DC000000DE000000E000026
-:10452000000E2000000E4000000E6000000E800013
-:10453000000EA000000EC000000EE000000F000002
-:10454000000F2000000F4000000F6000000F8000EF
-:10455000000FA000000FC000000FE00000100000DE
-:1045600000102000001040000010600000108000CB
-:104570000010A0000010C0000010E00000110000BA
-:1045800000112000001140000011600000118000A7
-:104590000011A0000011C0000011E0000012000096
-:1045A0000012200000124000001260000012800083
-:1045B0000012A0000012C0000012E0000013000072
-:1045C000001320000013400000136000001380005F
-:1045D0000013A0000013C0000013E000001400004E
-:1045E000001420000014400000146000001480003B
-:1045F0000014A0000014C0000014E000001500002A
-:104600000015200000154000001560000015800016
-:104610000015A0000015C0000015E0000016000005
-:1046200000162000001640000016600000168000F2
-:104630000016A0000016C0000016E00000170000E1
-:1046400000172000001740000017600000178000CE
-:104650000017A0000017C0000017E00000180000BD
-:1046600000182000001840000018600000188000AA
-:104670000018A0000018C0000018E0000019000099
-:104680000019200000194000001960000019800086
-:104690000019A0000019C0000019E000001A000075
-:1046A000001A2000001A4000001A6000001A800062
-:1046B000001AA000001AC000001AE000001B000051
-:1046C000001B2000001B4000001B6000001B80003E
-:1046D000001BA000001BC000001BE000001C00002D
-:1046E000001C2000001C4000001C6000001C80001A
-:1046F000001CA000001CC000001CE000001D000009
-:10470000001D2000001D4000001D6000001D8000F5
-:10471000001DA000001DC000001DE000001E0000E4
-:10472000001E2000001E4000001E6000001E8000D1
-:10473000001EA000001EC000001EE000001F0000C0
-:10474000001F2000001F4000001F6000001F8000AD
-:10475000001FA000001FC000001FE000002000009C
-:104760000020200000204000002060000020800089
-:104770000020A0000020C0000020E0000021000078
-:104780000021200000214000002160000021800065
-:104790000021A0000021C0000021E0000022000054
-:1047A0000022200000224000002260000022800041
-:1047B0000022A0000022C0000022E0000023000030
-:1047C000002320000023400000236000002380001D
-:1047D0000023A0000023C0000023E000002400000C
-:1047E00000242000002440000024600000248000F9
-:1047F0000024A0000024C0000024E00000250000E8
-:1048000000252000002540000025600000258000D4
-:104810000025A0000025C0000025E00000260000C3
-:1048200000262000002640000026600000268000B0
-:104830000026A0000026C0000026E000002700009F
-:10484000002720000027400000276000002780008C
-:104850000027A0000027C0000027E000002800007B
-:104860000028200000284000002860000028800068
-:104870000028A0000028C0000028E0000029000057
-:104880000029200000294000002960000029800044
-:104890000029A0000029C0000029E000002A000033
-:1048A000002A2000002A4000002A6000002A800020
-:1048B000002AA000002AC000002AE000002B00000F
-:1048C000002B2000002B4000002B6000002B8000FC
-:1048D000002BA000002BC000002BE000002C0000EB
-:1048E000002C2000002C4000002C6000002C8000D8
-:1048F000002CA000002CC000002CE000002D0000C7
-:10490000002D2000002D4000002D6000002D8000B3
-:10491000002DA000002DC000002DE000002E0000A2
-:10492000002E2000002E4000002E6000002E80008F
-:10493000002EA000002EC000002EE000002F00007E
-:10494000002F2000002F4000002F6000002F80006B
-:10495000002FA000002FC000002FE000003000005A
-:104960000030200000304000003060000030800047
-:104970000030A0000030C0000030E0000031000036
-:104980000031200000314000003160000031800023
-:104990000031A0000031C0000031E0000032000012
-:1049A00000322000003240000032600000328000FF
-:1049B0000032A0000032C0000032E00000330000EE
-:1049C00000332000003340000033600000338000DB
-:1049D0000033A0000033C0000033E00000340000CA
-:1049E00000342000003440000034600000348000B7
-:1049F0000034A0000034C0000034E00000350000A6
-:104A00000035200000354000003560000035800092
-:104A10000035A0000035C0000035E0000036000081
-:104A2000003620000036400000366000003680006E
-:104A30000036A0000036C0000036E000003700005D
-:104A4000003720000037400000376000003780004A
-:104A50000037A0000037C0000037E0000038000039
-:104A60000038200000384000003860000038800026
-:104A70000038A0000038C0000038E0000039000015
-:104A80000039200000394000003960000039800002
-:104A90000039A0000039C0000039E000003A0000F1
-:104AA000003A2000003A4000003A6000003A8000DE
-:104AB000003AA000003AC000003AE000003B0000CD
-:104AC000003B2000003B4000003B6000003B8000BA
-:104AD000003BA000003BC000003BE000003C0000A9
-:104AE000003C2000003C4000003C6000003C800096
-:104AF000003CA000003CC000003CE000003D000085
-:104B0000003D2000003D4000003D6000003D800071
-:104B1000003DA000003DC000003DE000003E000060
-:104B2000003E2000003E4000003E6000003E80004D
-:104B3000003EA000003EC000003EE000003F00003C
-:104B4000003F2000003F4000003F6000003F800029
-:104B5000003FA000003FC000003FE000003FE00138
-:104B600000000000000001FF0000020000007FF8CC
-:104B700000007FF800000CDF0000150000000001BD
-:104B80000000000100000001FFFFFFFFFFFFFFFF2B
-:104B9000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF25
-:104BA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF15
-:104BB000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF05
-:104BC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5
-:104BD000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE5
-:104BE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD5
-:104BF000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC5
-:104C0000FFFFFFFFFFFFFFFFFFFFFFFF00000000B0
-:104C1000FFFFFFFF00000000FFFFFFFFFFFFFFFFA0
-:104C200000000000FFFFFFFF00000000FFFFFFFF8C
-:104C3000FFFFFFFF00000000FFFFFFFF000000007C
-:104C4000FFFFFFFF0000000300BEBC20FFFFFFFFCF
-:104C500000000000FFFFFFFF00000000FFFFFFFF5C
-:104C60000000000300BEBC20FFFFFFFF00000000AB
-:104C7000FFFFFFFF00000000FFFFFFFF0000000339
-:104C800000BEBC20FFFFFFFF00000000FFFFFFFF92
-:104C900000000000FFFFFFFF0000000300BEBC207B
-:104CA000FFFFFFFF00000000FFFFFFFF000000000C
-:104CB000FFFFFFFF0000000300BEBC20FFFFFFFF5F
-:104CC00000000000FFFFFFFF00000000FFFFFFFFEC
-:104CD0000000000300BEBC2000002000000040C017
-:104CE00000006180000082400000A3000000C3C0FB
-:104CF0000000E4800001054000012600000146C0DC
-:104D000000016780000188400001A9000001C9C0BE
-:104D10000001EA8000020B4000022C0000024CC09F
-:104D200000026D8000028E400002AF000002CFC082
-:104D30000002F0800003114000033200000352C063
-:104D400000037380000394400003B5000003D5C046
-:104D50000003F6800004174000043800000458C027
-:104D60000004798000049A40000080000001038064
-:104D70000001870000020A8000028E0000031180FB
-:104D8000000395000004188000049C0000051F80AB
-:104D90000005A300000626800006AA0000072D805B
-:104DA0000007B100000834800008B80000093B800B
-:104DB0000009BF00000A4280000AC600000B4980BB
-:104DC000000BCD00000C5080000CD400000D57806B
-:104DD000000DDB0000007FF800007FF80000193EA6
-:104DE0000000350000001900001000000000000065
-:104DF00000000000FFFFFFFF400000004000000037
-:104E000040000000400000004000000040000000A2
-:104E10004000000040000000400000004000000092
-:104E20004000000040000000400000004000000082
-:104E30004000000040000000400000004000000072
-:104E40004000000040000000400000004000000062
-:104E50004000000040000000400000004000000052
-:104E60004000000040000000400000004000000042
-:104E7000400000004000000000007FF800007FF8C4
-:104E8000000005C700001500FFFFFFFFFFFFFFFF49
-:104E9000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF22
-:104EA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF12
-:104EB000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF02
-:104EC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2
-:104ED000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE2
-:104EE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD2
-:104EF000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC2
-:104F0000FFFFFFFFFFFFFFFF400000004000000029
-:104F10004000000040000000400000004000000091
-:104F20004000000040000000400000004000000081
-:104F30004000000040000000400000004000000071
-:104F40004000000040000000400000004000000061
-:104F50004000000040000000400000004000000051
-:104F60004000000040000000400000004000000041
-:104F70004000000040000000400000004000000031
-:104F800040000000400000000000100000002080F1
-:104F900000003100000041800000520000006280EB
-:104FA0000000730000008380000094000000A480D3
-:104FB0000000B5000000C5800000D6000000E680BB
-:104FC0000000F700000107800001180000012880A0
-:104FD000000139000001498000015A0000016A8087
-:104FE00000017B0000018B8000019C000001AC806F
-:104FF0000001BD000001CD800001DE000001EE8057
-:105000000001FF0000007FF800007FF80000112E73
-:105010000000350010000000000028AD0000000076
-:105020000001000100070205CCCCCCC5FFFFFFFF4B
-:10503000FFFFFFFF7058103C000000000000000060
-:1050400000000001CCCC0201CCCCCCCCCCCC0201F9
-:10505000CCCCCCCCCCCC0201CCCCCCCCCCCC0201BA
-:10506000CCCCCCCCCCCC0201CCCCCCCCCCCC0201AA
-:10507000CCCCCCCCCCCC0201CCCCCCCCCCCC02019A
-:10508000CCCCCCCC00000000FFFFFFFF40000000B4
-:105090004000000040000000400000004000000010
-:1050A0004000000040000000400000004000000000
-:1050B00040000000400000004000000040000000F0
-:1050C00040000000400000004000000040000000E0
-:1050D00040000000400000004000000040000000D0
-:1050E00040000000400000004000000040000000C0
-:1050F00040000000400000004000000040000000B0
-:10510000400000004000000040000000002625A0F4
-:1051100000000000002625A000000000002625A0B9
-:1051200000000000002625A000000000000E023252
-:10513000011600D60010000000000000002625A087
-:1051400000000000002625A000000000002625A089
-:1051500000000000002625A00000000000720236BA
-:10516000012300F300100000000000000000FFFF1A
-:10517000000000000000FFFF000000000000FFFF33
-:10518000000000000000FFFF000000000000FFFF23
-:10519000000000000000FFFF000000000000FFFF13
-:1051A000000000000000FFFF000000000000FFFF03
-:1051B000000000000000FFFF000000000000FFFFF3
-:1051C000000000000000FFFF000000000000FFFFE3
-:1051D000000000000000FFFF000000000000FFFFD3
-:1051E000000000000000FFFF000000000000FFFFC3
-:1051F000000000000000FFFF000000000000FFFFB3
-:10520000000000000000FFFF000000000000FFFFA2
-:10521000000000000000FFFF000000000000FFFF92
-:10522000000000000000FFFF000000000000FFFF82
-:10523000000000000000FFFF000000000000FFFF72
-:10524000000000000000FFFF000000000000FFFF62
-:10525000000000000000FFFF000000000000FFFF52
-:10526000000000000000FFFF000000000000FFFF42
-:10527000000000000000FFFF000000000000FFFF32
-:10528000000000000000FFFF000000000000FFFF22
-:10529000000000000000FFFF000000000000FFFF12
-:1052A000000000000000FFFF000000000000FFFF02
-:1052B000000000000000FFFF000000000000FFFFF2
-:1052C000000000000000FFFF000000000000FFFFE2
-:1052D000000000000000FFFF000000000000FFFFD2
-:1052E000000000000000FFFF000000000000FFFFC2
-:1052F000000000000000FFFF000000000000FFFFB2
-:10530000000000000000FFFF000000000000FFFFA1
-:10531000000000000000FFFF000000000000FFFF91
-:10532000000000000000FFFF000000000000FFFF81
-:10533000000000000000FFFF000000000000FFFF71
-:10534000000000000000FFFF000000000000FFFF61
-:10535000000000000000FFFF000000000000FFFF51
-:10536000000000000000FFFF00000000FFFFFFF34F
-:10537000318FFFFF0C30C30CC30C30C3CF3CF300A4
-:10538000F3CF3CF30000CF3CCDCDCDCDFFFFFFF1FF
-:1053900030EFFFFF0C30C30CC30C30C3CF3CF30025
-:1053A000F3CF3CF30001CF3CCDCDCDCDFFFFFFF6D9
-:1053B000305FFFFF0C30C30CC30C30C3CF3CF30095
-:1053C000F3CF3CF30002CF3CCDCDCDCDFFFFF406B3
-:1053D0001CBFFFFF0C30C305C30C30C3CF3000141B
-:1053E000F3CF3CF30004CF3CCDCDCDCDFFFFFFF29A
-:1053F000304FFFFF0C30C30CC30C30C3CF3CF30065
-:10540000F3CF3CF30008CF3CCDCDCDCDFFFFFFFA6D
-:10541000302FFFFF0C30C30CC30C30C3CF3CF30064
-:10542000F3CF3CF30010CF3CCDCDCDCDFFFFFFF748
-:1054300031EFFFFF0C30C30CC30C30C3CF3CF30083
-:10544000F3CF3CF30020CF3CCDCDCDCDFFFFFFF51A
-:10545000302FFFFF0C30C30CC30C30C3CF3CF30024
-:10546000F3CF3CF30040CF3CCDCDCDCDFFFFFFF3DC
-:10547000318FFFFF0C30C30CC30C30C3CF3CF300A3
-:10548000F3CF3CF30000CF3CCDCDCDCDFFFFFFF1FE
-:10549000310FFFFF0C30C30CC30C30C3CF3CF30003
-:1054A000F3CF3CF30001CF3CCDCDCDCDFFFFFFF6D8
-:1054B000305FFFFF0C30C30CC30C30C3CF3CF30094
-:1054C000F3CF3CF30002CF3CCDCDCDCDFFFFF406B2
-:1054D0001CBFFFFF0C30C305C30C30C3CF3000141A
-:1054E000F3CF3CF30004CF3CCDCDCDCDFFFFFFF299
-:1054F000304FFFFF0C30C30CC30C30C3CF3CF30064
-:10550000F3CF3CF30008CF3CCDCDCDCDFFFFFFFA6C
-:10551000302FFFFF0C30C30CC30C30C3CF3CF30063
-:10552000F3CF3CF30010CF3CCDCDCDCDFFFFFFF747
-:1055300030EFFFFF0C30C30CC30C30C3CF3CF30083
-:10554000F3CF3CF30020CF3CCDCDCDCDFFFFFFF519
-:10555000304FFFFF0C30C30CC30C30C3CF3CF30003
-:10556000F3CF3CF30040CF3CCDCDCDCDFFFFFFF3DB
-:1055700031EFFFFF0C30C30CC30C30C3CF3CF30042
-:10558000F3CF3CF30000CF3CCDCDCDCDFFFFFFF1FD
-:10559000310FFFFF0C30C30CC30C30C3CF3CF30002
-:1055A000F3CF3CF30001CF3CCDCDCDCDFFFFFFF6D7
-:1055B000305FFFFF0C30C30CC30C30C3CF3CF30093
-:1055C000F3CF3CF30002CF3CCDCDCDCDFFFFF406B1
-:1055D0001CBFFFFF0C30C305C30C30C3CF30001419
-:1055E000F3CF3CF30004CF3CCDCDCDCDFFFFFFF298
-:1055F000304FFFFF0C30C30CC30C30C3CF3CF30063
-:10560000F3CF3CF30008CF3CCDCDCDCDFFFFFFFA6B
-:10561000302FFFFF0C30C30CC30C30C3CF3CF30062
-:10562000F3CF3CF30010CF3CCDCDCDCDFFFFFF97A6
-:10563000056FFFFF0C30C30CC30C30C3CF3CC00060
-:10564000F3CF3CF30020CF3CCDCDCDCDFFFFFFF518
-:10565000310FFFFF0C30C30CC30C30C3CF3CF30041
-:10566000F3CF3CF30040CF3CCDCDCDCDFFFFFFF3DA
-:10567000320FFFFF0C30C30CC30C30C3CF3CF30020
-:10568000F3CF3CF30000CF3CCDCDCDCDFFFFFFF1FC
-:10569000310FFFFF0C30C30CC30C30C3CF3CF30001
-:1056A000F3CF3CF30001CF3CCDCDCDCDFFFFFFF6D6
-:1056B000305FFFFF0C30C30CC30C30C3CF3CF30092
-:1056C000F3CF3CF30002CF3CCDCDCDCDFFFFF406B0
-:1056D0001CBFFFFF0C30C305C30C30C3CF30001418
-:1056E000F3CF3CF30004CF3CCDCDCDCDFFFFFFF297
-:1056F000304FFFFF0C30C30CC30C30C3CF3CF30062
-:10570000F3CF3CF30008CF3CCDCDCDCDFFFFFF8ADA
-:10571000042FFFFF0C30C30CC30C30C3CF3CC000C0
-:10572000F3CF3CF30010CF3CCDCDCDCDFFFFFF97A5
-:1057300005CFFFFF0C30C30CC30C30C3CF3CC000FF
-:10574000F3CF3CF30020CF3CCDCDCDCDFFFFFFF517
-:10575000310FFFFF0C30C30CC30C30C3CF3CF30040
-:10576000F3CF3CF30040CF3CCDCDCDCDFFFFFFF3D9
-:10577000316FFFFF0C30C30CC30C30C3CF3CF300C0
-:10578000F3CF3CF30000CF3CCDCDCDCDFFFFFFF1FB
-:10579000302FFFFF0C30C30CC30C30C3CF3CF300E1
-:1057A000F3CF3CF30001CF3CCDCDCDCDFFFFFFF6D5
-:1057B000305FFFFF0C30C30CC30C30C3CF3CF30091
-:1057C000F3CF3CF30002CF3CCDCDCDCDFFFFFFF6B4
-:1057D00030BFFFFF0C30C30CC30C30C3CF3CF314FD
-:1057E000F3CF3CF30004CF3CCDCDCDCDFFFFFFF296
-:1057F000304FFFFF0C30C30CC30C30C3CF3CF30061
-:10580000F3CF3CF30008CF3CCDCDCDCDFFFFFFFA69
-:10581000302FFFFF0C30C30CC30C30C3CF3CF30060
-:10582000F3CF3CF30010CF3CCDCDCDCDFFFFFFF744
-:1058300031CFFFFF0C30C30CC30C30C3CF3CF3009F
-:10584000F3CF3CF30020CF3CCDCDCDCDFFFFFFF01B
-:10585000307FFFFF0C30C30CC30C30C3CF3CF300D0
-:10586000F3CF3CF30040CF3CCDCDCDCDFFFFFFFFCC
-:1058700030CFFFFF0C30C30CC30C30C3CF3CF3CC94
-:10588000F3CF3CF30000CF3CCDCDCDCDFFFFFFFFEC
-:1058900030CFFFFF0C30C30CC30C30C3CF3CF3CC74
-:1058A000F3CF3CF30001CF3CCDCDCDCDFFFFFFFFCB
-:1058B00030CFFFFF0C30C30CC30C30C3CF3CF3CC54
-:1058C000F3CF3CF30002CF3CCDCDCDCDFFFFFFFFAA
-:1058D00030CFFFFF0C30C30CC30C30C3CF3CF3CC34
-:1058E000F3CF3CF30004CF3CCDCDCDCDFFFFFFFF88
-:1058F00030CFFFFF0C30C30CC30C30C3CF3CF3CC14
-:10590000F3CF3CF30008CF3CCDCDCDCDFFFFFFFF63
-:1059100030CFFFFF0C30C30CC30C30C3CF3CF3CCF3
-:10592000F3CF3CF30010CF3CCDCDCDCDFFFFFFFF3B
-:1059300030CFFFFF0C30C30CC30C30C3CF3CF3CCD3
-:10594000F3CF3CF30020CF3CCDCDCDCDFFFFFFFF0B
-:1059500030CFFFFF0C30C30CC30C30C3CF3CF3CCB3
-:10596000F3CF3CF30040CF3CCDCDCDCDFFFFFFFFCB
-:1059700030CFFFFF0C30C30CC30C30C3CF3CF3CC93
-:10598000F3CF3CF30000CF3CCDCDCDCDFFFFFFFFEB
-:1059900030CFFFFF0C30C30CC30C30C3CF3CF3CC73
-:1059A000F3CF3CF30001CF3CCDCDCDCDFFFFFFFFCA
-:1059B00030CFFFFF0C30C30CC30C30C3CF3CF3CC53
-:1059C000F3CF3CF30002CF3CCDCDCDCDFFFFFFFFA9
-:1059D00030CFFFFF0C30C30CC30C30C3CF3CF3CC33
-:1059E000F3CF3CF30004CF3CCDCDCDCDFFFFFFFF87
-:1059F00030CFFFFF0C30C30CC30C30C3CF3CF3CC13
-:105A0000F3CF3CF30008CF3CCDCDCDCDFFFFFFFF62
-:105A100030CFFFFF0C30C30CC30C30C3CF3CF3CCF2
-:105A2000F3CF3CF30010CF3CCDCDCDCDFFFFFFFF3A
-:105A300030CFFFFF0C30C30CC30C30C3CF3CF3CCD2
-:105A4000F3CF3CF30020CF3CCDCDCDCDFFFFFFFF0A
-:105A500030CFFFFF0C30C30CC30C30C3CF3CF3CCB2
-:105A6000F3CF3CF30040CF3CCDCDCDCDFFFFFFFFCA
-:105A700030CFFFFF0C30C30CC30C30C3CF3CF3CC92
-:105A8000F3CF3CF30000CF3CCDCDCDCDFFFFFFFFEA
-:105A900030CFFFFF0C30C30CC30C30C3CF3CF3CC72
-:105AA000F3CF3CF30001CF3CCDCDCDCDFFFFFFFFC9
-:105AB00030CFFFFF0C30C30CC30C30C3CF3CF3CC52
-:105AC000F3CF3CF30002CF3CCDCDCDCDFFFFFFFFA8
-:105AD00030CFFFFF0C30C30CC30C30C3CF3CF3CC32
-:105AE000F3CF3CF30004CF3CCDCDCDCDFFFFFFFF86
-:105AF00030CFFFFF0C30C30CC30C30C3CF3CF3CC12
-:105B0000F3CF3CF30008CF3CCDCDCDCDFFFFFFFF61
-:105B100030CFFFFF0C30C30CC30C30C3CF3CF3CCF1
-:105B2000F3CF3CF30010CF3CCDCDCDCDFFFFFFFF39
-:105B300030CFFFFF0C30C30CC30C30C3CF3CF3CCD1
-:105B4000F3CF3CF30020CF3CCDCDCDCDFFFFFFFF09
-:105B500030CFFFFF0C30C30CC30C30C3CF3CF3CCB1
-:105B6000F3CF3CF30040CF3CCDCDCDCD000C0000B9
-:105B7000000700C000028130000B815800020210B3
-:105B800000010230000F024000010330000C000051
-:105B9000000800C000028140000B81680002022062
-:105BA0000001024000070250000202C0000F000086
-:105BB000000800F000028170000B81980002025082
-:105BC00000010270000B8280000803380010000002
-:105BD0000008010000028180000B81A80002026021
-:105BE00000018280000E829800080380000B0000F4
-:105BF000000100B0000280C0000580E80002014002
-:105C000000010160000E017000038250CCCCCCCCAE
-:105C1000CCCCCCCCCCCCCCCCCCCCCCCC00002000D4
-:105C2000CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCB4
-:105C300000002000CCCCCCCCCCCCCCCCCCCCCCCCB4
-:105C4000CCCCCCCC04002000000000000000000000
-:105C50001F8B080000000000000BFB51CFC0F003B9
-:105C60008A59051918AC84117C7A607E4ECAF43BBF
-:105C7000F232303803B12B103700F1616E06862303
-:105C8000DCC4EBBF2C8F6087CA32303402F11E694E
-:105C900006063B3984B8B90203C30A203F0B2AF633
-:105CA0001E4897CA53E6EEC182B55531C5349411EA
-:105CB0006C1D2CF2C858174DBE5D1995AF4740FFBB
-:105CC00040E32C1D54FE742D08FD4D1B4267A3C9F3
-:105CD000CF80CAFB40FD95A383DD5C5F22FD9DCA9A
-:105CE00082CA8F47E3B731A2F2CD3850F94950F557
-:105CF00000CDA28F7AC80300000000000000000061
-:105D00001F8B080000000000000BED7D0D7854D5BE
-:105D1000B5E83A73CEFC25672693908409093009CB
-:105D200021441B700C3F0D16EB097F8636D70E14ED
-:105D3000696C150744881048A4D6874FFD3291003E
-:105D4000E17F504B43413CFC29BD97B691A2A596FB
-:105D5000D2019F165BDFF782CF7AB5B5BD23A5F8D8
-:105D6000539498774BEDBBDEFAF65A7B9FCC3927DC
-:105D7000332448BDED7BEFC6AF3DEC73F6CFFADBC5
-:105D80006BAFB5F6DA7B9C0E37148E04F818FF6EF5
-:105D900000F81715000A524FA70762D9D700E4E6AA
-:105DA0006BB16415C0D07C2D0113D8FB802BE49619
-:105DB00052ED8CE789DC9941ACD75EA00581F5D125
-:105DC0009E3B0FA2D857B411A01040F100FD19F569
-:105DD0009D81391EA8A2577FF9D8F82E03AC0994EB
-:105DE000E5603B7BFF003AC04473D90160F4C9DA37
-:105DF000790D78CBD98B7C80AC090EFDC652067725
-:105E0000B99EC0727688C1CDCA274A5FF08C62788D
-:105E10006CB8DE117653EBBB012601ACC4BE42EC7C
-:105E2000FDD884F8AE84B13C433ED4E662E5EC7222
-:105E3000A0FABEB1B1848BDA696A116B1700DE2E4D
-:105E400050B9B81EC601E468AE145CBC1EE19F2DBB
-:105E5000EA79CAADDFB361D307B21F4B4988F8585E
-:105E6000FF35EC7BA5E97BE5CCB7B0DF6C30B563E3
-:105E7000786CC37F14017C0E7CF9E7B0F3CFC26766
-:105E8000910E303D0F60727FFAA5E81623FE027076
-:105E9000BE78A1EF8FF8E0117CB8717AB2C1C1F081
-:105EA00056A73800F19E297FE4296374DC7C4A26DA
-:105EB0003A6C6E60FFC7BE6FAE73E8B152C2B3BE3C
-:105EC00088B51F29F0CC9BF8B2842C5AD7CACAEEE9
-:105ED000FE747687131ACA891A8E513F6EF66E08C1
-:105EE000932B77490FC9CDC81A464FA4CB031CEF9B
-:105EF00018FBEFE3B2143DDD063DA758E9E916F4BF
-:105F0000CCBBC74A47770DA3A31FBF5BE9A8E33FFC
-:105F100018BD1619742C80D144C7581ED177B0749F
-:105F2000CCB5D13160D031966C5050FE908E0CDEE5
-:105F3000AD9A03B259B9F735B72E23DD625A77907F
-:105F4000D5574563B586CBD16601D77AA4DF18FA59
-:105F5000E4700419BFAABA343E6F121296B3AB7440
-:105F600092772F23CB905294575552183D37563283
-:105F7000790D119C92A3A63F5CEC8FDA6F64F0A8B8
-:105F80002678367ABA3C122B6F63F0C624AC76388A
-:105F9000807269E0ED0E392CF45682593679E7703B
-:105FA0001AF06DD3F87C36C141EFA1BBAB436270F0
-:105FB0005E9CE1800DD2C0FD6EEDEBC7DABFBDDFA8
-:105FC00001E14B06BCE50CBF8B2FCAE10D8C3E1BDB
-:105FD000435D1D28E75BA7737CFBF3F90AC7EBE978
-:105FE000F1944F308D17EEF104D2EAB72B1C0772F3
-:105FF000AD78D504BC81AA2B1F07020B4622FF33C4
-:10600000F1E3AF067F88C16FA293B73C2061FFDE4A
-:10601000B10F7B80E6FD610FC2611FA71FBCB67187
-:10602000EDE32895314DA1924D1F057400937EA19B
-:106030003A217C727D921DB6EA196FA54DBF84ACE2
-:106040006545E81BC5A66F3EB0EBEB0983D4335A18
-:1060500023C11B12708198CFA3C47C9E762819F4AB
-:1060600030FA95EF32F4F5033FAF64F27040E8EB9D
-:10607000039D407AF64017D3D734AFB9BE1EC7414F
-:1060800083AA6FBEEC40FCF7F6E91B2B7DCAE2DA6F
-:1060900054D43BE5F1B003FB29DBC4F54D59478BE4
-:1060A00003F9344EE82D38CAE9E061FF99F5759996
-:1060B0001867D42E2B1DCB90BEAC5DD511DBFB1A1F
-:1060C000BEEE958189AE6CBCADF80F46AF6112A3F0
-:1060D000E367D8BF474305D171CA20D73D4147BBCD
-:1060E000BE2EC3B147313A3ECAF435C36F6480D384
-:1060F000B1BDC3010ED48FBB1CA41FC794461C584E
-:10610000CFD0DB0234A814F8EF13EB9D01E7A8070A
-:106110007A6A51B99743CF0937EB27771384132154
-:10612000D4D325B538CEE371AEA7CBE3E0889AECA3
-:10613000A15C01CFE3D37B5F1CC3EAF5C69530A217
-:10614000B91F420E4F698AAEC67A3B52C8E93F601A
-:106150002D931CDAF93852C8A59D3E6374ABFC96AA
-:106160003F6AE3C7266B79A44DAEEB0D7E18723DF6
-:10617000487EB81588B9F3B0AC937DE761342A60E6
-:1061800065F907CF6928D76A277F97DBE1D04B995C
-:10619000DCFADA7959E950F45A36EE6D6880B1F2DA
-:1061A000E818E86897CAD33548327A8F0E244066DB
-:1061B000EF474E87B06C9A2F869D69F06F94A0DFF1
-:1061C00028616FE43CD8EB45397F3CC0E88E7C7F8A
-:1061D0004011ED7BBC91B129BADBF5C3571AAC7401
-:1061E000BF39926DA1D7ACD0104B79FCA96197E46F
-:1061F00093A13F0C3932E8D68F0F312BDF7CD3AD22
-:10620000DFEDFAA74DB2E99F41F2C975122AD18E8E
-:1062100019E3C80AEF2DED5FEF61C921EC218F7EF4
-:10622000968DB70024C861FD2F87E408A4F7513587
-:1062300044DF5738928558BE003DDB878F4AF53FD3
-:106240004281A3520E53DA8CBCAB1848C33C90C8B1
-:1062500026BB18229E422201D14562FFBB95E44530
-:106260007120BD8A03FC3DC472142C07C1F80B5980
-:10627000ECC4A2552FFC5962F353124F19F9C8C64A
-:10628000774294E4C103712A6741173D55E8A6A7F8
-:106290001F7AE819808084CF3C08D313AED69F4A7A
-:1062A000901E7D2040F4F4FE0E3ECE4EE1B346F04B
-:1062B0006D1844BE2F4D443E24C023A7E4D02BE6E6
-:1062C00037B3D7482F7B2A99FC96A27FC0D6D52A10
-:1062D0009AFFDC9F99DE134379CE51615884BDDF6C
-:1062E000D81A20FDBCB9D543CF0EA16F4AAE796153
-:1062F000C71DEC9F8F8CAD79732F7B9E68DBAEA1A1
-:106300005DD33196EB97A1D3BBEB46A19D58AF70FF
-:10631000BBB09DDBAD39825A1DA393FA6A567FCB81
-:10632000DD9EB0797D31F4D096EB9307F7B1EF7A2B
-:106330004B167DD7A70B7BEC23C67FC30F42FA8594
-:1063400005DFEA136487B2F7311FABEFF990213F05
-:106350009E7D0FF6B4A6D33F1D6559A4FF3A4EAEFD
-:1063600087105BE7435A4C23BB760A33594BC9BEAF
-:1063700075C4AA70F6457F2531FAE6C40292A622BA
-:106380007D40C2761E740891BE4A3C68B657FBFA3F
-:106390001F1E0B2E64FDC5AE77850F90F88063DE5F
-:1063A000D8CC72BFBEEDDEAF6A69EC27BF4322FED8
-:1063B0009EBCBEB008FD5D17048AB227E03C72C1E6
-:1063C000015C9FAE5F3C329AA65D6A3E19F651FAB7
-:1063D00067A6766E195ABA4CFD963B1CA42FC1E1F4
-:1063E000A1676E09979750A5909B18687A1A3BF39E
-:1063F000F3027E8F128380B0A73F4D7ABD2D713896
-:10640000D74BD0D095061E1DE19988F3A02986FEB2
-:10641000404E1B9757A6B534AC1F52F8D3A87FA3A4
-:10642000A8FFA4C0E332F44DE1A3386FF307A9EF4E
-:1064300070DC34F884C5F89733EED651688C062C9E
-:1064400074B7F3B36F7C8797EA5DBC7E7B10FDE782
-:106450004C70865A58DDA1EC592F9E55E25949BA25
-:10646000BDDF7897DBDF144788F0B4F70BFBB9FD8D
-:106470009423D6A913935D34CF873F00229E62D523
-:106480001BC3991F89FA4D3FC8167809F5062F3F9F
-:10649000B61FC89EEABDE721B23B4B50AFCA18E712
-:1064A00088D23C2E8510950DFDB616F51D7B5E84B9
-:1064B000C82D8E02D42B5D27515FD64FB87B6ABAA8
-:1064C00078D11DC6FCB88CF5E8F3ECB9C013B9134C
-:1064D000FB57C3A735B66243EE5C29969DD37F5E1A
-:1064E00031F10CCE31CF873EB9E0F3A91DE5BD8A6D
-:1064F000CF9BD9AC5C579E1E4EBDED6291B0FB8622
-:10650000917FA3C0B039A6F9A83FC8E6156BF7B8CC
-:10651000E8CF78BF5DE017FB04F3A08E3D03615D1B
-:106520004375394F6F7122DF6E96A26B10EFB9F58C
-:1065300091E791F5EAC16E2D2B44EF3B1C6C9CBAA0
-:10654000501C3907AAD61DC3E763F72CD4908FBD22
-:106550004C67C969FC66E399A539AC7E92DDEF1BF7
-:10656000E47CBC3A1C9F8A765865C3891388EE0286
-:106570004F7427C23524F2945680F0864E6B7926EC
-:106580007E8D14FC5AE6E0F8E73E20F8A66841E468
-:10659000C75D10D98BED039AB0BB07094726F947B1
-:1065A0003B13E93812E59DE9CDF63093F7D2D47C60
-:1065B000C811F3A15DCC87DE095CFEDB03D58174D5
-:1065C000EB8521EF86FC1BFAD05E2FF109E4FC2A53
-:1065D000F6AC8000F9311721FADF900E0C7BB26B1C
-:1065E00072A777913F67CCABFAF0E9E943183EEA2E
-:1065F000845035D2DF18F7BC90BB051EEDE7241F91
-:10660000E56D4A1EC36BCC3D101EC5EACD2ACF9561
-:10661000CCF2FE6A5FFDC8699A5FF7746B4A68E066
-:1066200076FF43E077B31479CD2C87AC9F5F615937
-:106630000D75A384F5D13924EC7BB96D21D90F4CAC
-:106640003E0348E7792D2DCFE37873AB226BB0BEC4
-:10665000D1FFAC90CD6E97A26F61BF7639AD83B894
-:106660000297B17E8C94A217B09FFA5037C19B3B22
-:106670003D4272C6E0FEE05382FB2F48D74C70BF0C
-:10668000858D516F86F7905E63F0C9328363F403A2
-:1066900009258FE87E5A41BA333A3BE582149D07BB
-:1066A0003BCFB7897936D07C6FC77F4C46BB383A31
-:1066B00004C7CF13762E244F00F7AFAC71CA19F27E
-:1066C00079403B2BB72E09181F1A724A0EDFC83EBD
-:1066D0000DAD0309ED62C38ECD13F3D180674B9FDF
-:1066E0009D1CA4F933444D06232ACED74964B73DF7
-:1066F000529B0CA29FB7B63544DF033593D6DF110A
-:10670000C2E1A304C786D6B0B0AF6BE819AFEB3DCA
-:1067100085FB025B820EB27F37B5561A71598237FC
-:10672000CFB093EBCE909DDC1BCC127EA315BE7830
-:10673000DD19CBBE87D10E82A6385619F623ECEBB5
-:1067400010D73703B5574BAC74EF6BAF0DAE7DD69A
-:10675000046BFB5A2DD981F1C400C68F100FA1F72D
-:10676000FC02C6408D83FC6483DE9E2A6B1C2E5E79
-:10677000977E1FA76F5DB08D07E559A932068B6222
-:106780008D04DF4A015FA67ED6887895517666D063
-:10679000934DB25827C57E5440C0FA88C6E8A1A6DA
-:1067A000E83144C8DD967AEE874180C7E70C3FC7E1
-:1067B00009FC7B6A3C8E379549DFC7F83836F88D7F
-:1067C000F62ED13E131C2E7B7F67593F934CFDD88C
-:1067D000E0CC049F7D7F0CDEB6F693597FD9DA9D1D
-:1067E0001F1C1FFAB503133FA99C672B0FB3D52FAE
-:1067F000B37DBFDAF6BDDA56BECE567FAAADFC0534
-:106800005BFD39B6F2576DF517DABE2FB57D5F69BE
-:106810002BFF576BFDAABB3E197DFF3FA39331AF02
-:10682000FAD345B7ECEFDAE75519244624D8736F4D
-:10683000EE4B8BF1D3BFC892728EFB243C8E058940
-:106840007111933DFE7B357A06D7B1BD1F6959A8FA
-:10685000F7F7C75FF6A33E32DE9F97DEF05F156263
-:106860007AC19558C1E33E719A3759A09C49562286
-:1068700097248A9779D44544724F397B6FD26F6ED3
-:1068800088109F5D25D6F710E7F3B01C7D7AD65FA0
-:106890006C9B8BECC15811E8A3315E94CFFBA7FA37
-:1068A000652978AB15AE9F8291782DCEE1610D5DA3
-:1068B00027F069A753705AECDA1730DEF008F7CBEF
-:1068C000F7CFB0FAD5B728DC0FB94DB96CBFE0D51A
-:1068D000F172AAFFFD0FAAE13656653F02C1CAB1A7
-:1068E000073D3AC63746605C8E6F1A505C6E38883A
-:1068F0003F117F2BC17FB376C3D55314670B350689
-:106900004EA2CE9BA354D0788F4B3D57E1788EECAE
-:10691000F3D7F2FDBCBF7C4CF17741AFE0C649C96B
-:1069200018A3176C758547139DC34467B702EDEE36
-:106930006A14134EDFD5ECB578AFF8F2D06D12FCC7
-:1069400040FD3B0AF7B575E0FE6482CA3E48523905
-:1069500047D8B9639452EE17083F9379F612FA5F5D
-:10696000C12F32BF3CCDFA315BAA1DA314A4E29320
-:106970005288C721A54D2FFC59C278572584F8FEAF
-:10698000948807AE97A58F311E1E18DCFE4EF06B63
-:1069900056BE821285D92679FE5A1F3F39BD46055B
-:1069A00039FEC1ADAE16F46BF6CFB2CA81515F5657
-:1069B0002E3B5EB17DDCA84F4F0E729551044F7F88
-:1069C00039B83580FB07528CD12D7BF074CB91B553
-:1069D000AF2A13114FA0F22149BB5529489515D074
-:1069E000E69BBFBF2A4716E0F7D854A86C5153FD69
-:1069F000B0F78B32BC5F92EE7DA961B79EE5EB7874
-:106A0000B1B0AF86B6C7C92E2D6ACACB32DB59C525
-:106A1000625DD8D3B4D08BF86E6F48AF078DE74670
-:106A2000E1F765AAA74A5D11D42B3056810369ECC2
-:106A3000F26751BE4DFA54ADB2DA5BD317C56AB1F5
-:106A4000BDBFCE01B86FC2D679B2EF8A842E7B78F3
-:106A50004A4CC2BC97F872083FC4F0F22F2AF3A642
-:106A6000B3931ED6B6D3FB1DF5876791DFC2EC3A10
-:106A700099E2E25DEBB13CA4C6011BD2EC173C21CC
-:106A8000F0DB5CCFE964FF5EE18268BA79F8AC22A2
-:106A9000F61994980485A9FD92274E147DA192C100
-:106AA0005B1C7684BDA1149CA57D765382E855516C
-:106AB000AD0430DF80297E8BBDB9A3BD7AC71D68C8
-:106AC000B7B3F768B7EFBC3E300CD78D3DB515B303
-:106AD0001A517FDFE980D1A1141C633AADF43CD197
-:106AE000373FADE3B27E6BC97FAA67E44A43872B89
-:106AF000A547A71837939CD8D755BB1C5CCEFA7016
-:106B0000937CE5F8FD00E7E144921F8AD30CAD6762
-:106B10007E5C556A1E197E8A5DCE02750B49CEB623
-:106B2000D7977911CFDEBA6AC9C5EA6DC19A69FCF7
-:106B30007163BC4CF05438A3DE00CDC385523ABA21
-:106B40001546D3C7CF35A7883F2B5109DB67AA3736
-:106B5000C229E441CCAB4231AF82535AE6D0BCD813
-:106B6000A5C0438C5E0FD755B78D26FA3948EEA6DF
-:106B70006B5CCF164EE0FB993E46AF67D9BAF7483B
-:106B8000038413ECFD23135C96FD9942411FBB3C2B
-:106B90003E32807E01B3FFC5E45F71AA7CFFB61C64
-:106BA000CAD19E7AB8EED2ED074BDF608343D39112
-:106BB000BF35D503C44DDA2E779D9A773DCA63CD94
-:106BC00020F3276CFA029EBB6BFD68C607DF2EA67A
-:106BD0002F201D7D5C167F7C207AD8E93F0EE99935
-:106BE000FDE9D1D3FE7D8853C40107498F27EBCB44
-:106BF000B6968732D7B7E363B4DB28E6DBE7A14775
-:106C0000C6F9AF4180E24B53214CCFE910A167B7E1
-:106C100012FD9293D59F092D5436E2508D0ADF97CD
-:106C2000802A3EAEB1BFAD4C03B293C78C077D2F17
-:106C3000EAE72973C4A6AFA29DF3A0D1C6E048E35A
-:106C400057013C447817DBD663234E31B4295E5F8D
-:106C5000CDFA2DAE77501CA3B8E6B0D7BC2EFBC53D
-:106C6000FC31FADBC9BEE3FABCB36970FC32EA3D21
-:106C7000A12429AFEB899A87DA70B951F2DE0EA60A
-:106C80006B6FA7EB968FBABC9134F0EC5C7494F206
-:106C9000B776D65C3A8E3290DC8C91D3DBB39F779B
-:106CA0007B896E3B733DB7F0E49C5596FC0390D511
-:106CB00052F3B83B3F82DCC8A5F489669D2F5B9CEC
-:106CC000221FC4073E94FF4CF4309E9F361D9E9CAD
-:106CD000DAB23492A67D859BDB136B722186F92292
-:106CE0004FBEAEE898DFC00496E471D22D211DEDB1
-:106CF00097355EAE979FAC05FA3E29577C7F2C44B2
-:106D0000F954C59D1073B1F5ACF8B5458FE4B27A6E
-:106D10009B16310FB234F57E53F86407EE133FF340
-:106D20008A2380F6D1246FC2136678D5887570E700
-:106D3000A29394771CDBA58447937E97409A44DE08
-:106D4000BC25AE79DCA910BC3BC30F7B716F6E47CD
-:106D50002849FD7C63F2494F88E1B7A9A4DB837819
-:106D60006EAE7998D6CBC38BCABE5C4164B5E6974C
-:106D7000CC94A7746B98BFBB88EF5BE426BB3D98AF
-:106D80009FE46F50E046069F5FE5F86E5A033AAE07
-:106D900053D5228F4482D9E41717D9F2B80A6D79F6
-:106DA0002681F0CC77709F9FF6FF1109B9E991B168
-:106DB000184F6C7688F4538DE6A94FE0E70B6B54BF
-:106DC0007FA67CCC8B790B3BDA9500AE7F015BBF55
-:106DD000763C02103DA149D40F8DB3E351BE4E065F
-:106DE000265266316B2AE00E30B887B021DBAD70D9
-:106DF0001B74B58FE3B395DF36E4B91846A31E3292
-:106E0000E2CE06FC76B9CD9FA41F7999E1BBF315BC
-:106E100095D6EB9D352F7FAD19D7F94A37E5717DB2
-:106E2000E1E2C1A6EFB3E72F3E385A8ECF2F16ED21
-:106E30009FD08C74107912463CAF107B26FB55E82E
-:106E40003563BCAA3DEDCE7C7A45F9159B4FBEDE7D
-:106E50008871E7A22620FBB748E1F2E96B77E86D7D
-:106E60000CFEFCEBE2240FC50D09025A6DE892629C
-:106E7000267B5E15F69CAF292AE13EFE8D0D712F13
-:106E8000E68BF844FCD737214E76D20CF90D4F52E1
-:106E90004DF1CFC87F37E69F9D3F158B78DE497156
-:106EA000BB1246B08B9B5A1C6487D7F07CEF8ACE0E
-:106EB0002E89FB7F3C9F9E87D4D933D2C8F30977B4
-:106EC000713BDDC8FFF63759F917E8CB9F8FD2BE6B
-:106ED0006B69A7ED7BA4EE2D2E87567E96B9043FF5
-:106EE0002B44FEA0CD4FDBDC24F6E9548F7E29BB7A
-:106EF000F6159187F32AE23FA6FFF79B33E8DF9B65
-:106F0000DC7C9F5F767477901F779D83FC383B1CF9
-:106F10005B9AB8DEDBEF7258ECF82B1DFF36A1FF51
-:106F20006547F26F327E531FFE7F9BF1EFFF1B8F91
-:106F3000BFE16F4CFF1D7F63FC0FFE07E33FAF52C5
-:106F4000B2F8697B5D1EEAEF87EEBEBC0D8BFE9644
-:106F50001DE9FDED332E87258FD8C84B9CD6A02D7B
-:106F600070A1BE0CF3731EF6FE66C82F75A01EDC62
-:106F700021F2B1991ED564CC779A6C9CD3E0FAAF1C
-:106F80004EE8BF3AA1FF0E67D0ABD5355CBF33FBEF
-:106F9000420F95E292119F5581EBF72985F28B0FF5
-:106FA000035B6650AF85DC69F3B10B05DC767D5A77
-:106FB00028F469F54BB6F7428FDAD7F9D2BEF82933
-:106FC00050FCF4BFBB447EA94DAF1A74D851C3ED39
-:106FD000E5FC39E9EDC14D363EAA135A280FC1CE62
-:106FE0008F332EEE5F1BFC58E0D17EED2AC8CCEF2C
-:106FF000A4E0F70D82DFBF7405E869E48D64E277F1
-:107000008D9B8FF359DFD9601B6213A9253EC8827F
-:107010004F326CEAA6F82F7C03CCFEE5968F981DC4
-:1070200082EBBFAA52FCECB3F9E03092ED3F32F6AE
-:10703000E9D89FB39BC751E57C97CDDFB2DBC11E7A
-:10704000CA8FDBA9F1F3563B6BF6EE5C81EBD32BD9
-:107050007C9F79676EE74B78F40DE2E31584C3B04B
-:107060001B41C467D1A4E0F928F6FD27ABDDBFF3CF
-:10707000A3AE04DA5F815229CC3C2BE8083D9C9FEB
-:10708000F63C9ECDDE57DD3E8BBF0B370ECE6E5FDE
-:107090002DF8CDFCC502B7697EAFF6CD1CCFF3A2AB
-:1070A000A607709F47D2663A309E9EA91F8CF49E19
-:1070B00033ED3B352ADA70EC4F42FFB132E53F0247
-:1070C00094F0F8BC81FF60CF0D34DDC5F7BF055DDE
-:1070D000F3AFEBFAABF891469CD7A8A72A094877FB
-:1070E0003EC81EB7BBD1A94D46FC060BFF6E143837
-:1070F000F6FCE72AB92E5DFC2029F4AB1A79EAC523
-:107100009B59D50973251EDF67669B795F6D53BE5A
-:1071100052972EDEF533314F7E894139D2EB09C8C3
-:107120009328AF04102F633EDAC7BF568C7BED1552
-:107130008EFF8A98D7D78A790D10A6FD984CE3D692
-:107140000ABD613C3FE9B8498177AD4BC4350618AB
-:1071500077B6C073F615E27B5E8C3B7B90F82E1001
-:10716000E32DB8C2713F14E32E18E4B8770BFADEB2
-:107170007D8574563C92E86770746E13E3B55DE1EB
-:10718000B801316EDB20C7DD26E8BBED0AE95C22E1
-:10719000C6DD66A373A6F9BBF70AC7ABF4F0F9B373
-:1071A0005FCC5FBB5E33C6578B1C116CBF3368ED81
-:1071B000E78B6E3EBEF184C4C7E4BF168B7DDDC98C
-:1071C0002BEE5DA8A519D7A86F5F8F338DF335110E
-:1071D000AF319EC6387EB11F3AF93A364E1AFA18C8
-:1071E000F5AF75713D98A9FFA5029EA597898751B6
-:1071F000BF16FB9F98B9FFFB041CF7D9E01FA87FBF
-:10720000A3FEEC01E0EF1070745C26FC46FD050364
-:10721000F4FF2D01C7B72E137EA3FEDD03D0E709CF
-:1072200001C7139709BF51BF6D80FE9F16703C7D4B
-:1072300099F01BF5B70D409FE7041CCF5D26FC4677
-:10724000FDFD7DF3DD3AFF54E33C50182A31DF7831
-:10725000046485E97E8370F204FA01EA2A7EBF01A4
-:1072600074D9CF4199CE4FB1297EE2BE8A18D6DFBC
-:107270007D178FFBEDBE16C88FD85D20F295455C5B
-:107280004B15F6E0EE6B791C647790E7EF832D5E8B
-:10729000B49BF93BB4EF5BC2F399D5AA3899983403
-:1072A0005CA13011439857C3CF5319F69E71AE6A53
-:1072B000B58853EDD680E254BBAB7879E774D01D26
-:1072C000A5A6F3569509CA4345C316E3B1A9F362CF
-:1072D0001AACAA36E563AC4A50BE8122F246184188
-:1072E000C09297613BA765DCA37073589B816AAE1F
-:1072F0007402DFCF2B8D58FD87263CBCC5EAFF56B4
-:10730000E8C900D64BA3670E7914CE3F91B7395721
-:10731000E06FD0AD5AF073CBEC0FBAA7313C5F9C55
-:10732000E2C44C1678F194A0E31459E7FBE7E0348B
-:10733000EBED3E39CFE00FAA9D2D27BD8C3E37BF28
-:10734000046164A36F97B6264471B58F48FE28AEDA
-:10735000C6C6BD79575C41F99BD5199A86F1C0B96B
-:107360002F8556AB987FDD09610DC9FBD1D7A99F49
-:10737000BC7608EB9C556D01B2736DF139E3BCAF7F
-:1073800088CF61B8DAEC5FCE127857B707D6E0D66F
-:107390005DF574B7C57E9D25FCCC2F696EEB394930
-:1073A00071EE7196CDCFECF458E3756A676406C64A
-:1073B000BFE5B9A7353CF73C26220586B2CFB745D5
-:1073C000B629189F9CB5AB85E7F567B80F23E7B1E1
-:1073D000393EB3FD3E46C8F32F775DDA5E37E20CE7
-:1073E00046DCE114E619BBD14F0F0ABE70B932E496
-:1073F000236FAE6491934E0FD7239D1E1EC7FF4F80
-:1074000039F9EBCAC96F3CD6F843277E63F3B12242
-:107410009C7E9FBED1E3FACFF9FA29F0C1EF4DCFA0
-:107420000768CAB1E4131B795576BA19F7C618650F
-:107430000FA43F8F57E215EBACDDAF7F235A8B785B
-:1074400019711A80FB6DFB9B53C2978A4BC8C6BD4E
-:10745000038E3764C4A7D22BF48F020AF56FC3835F
-:10746000E67D61EA3E1D7B7F6BC4791E032F677941
-:1074700044C37B56D818B4DF8779EB87AB707D0C9B
-:1074800058F0D6BC7CBDD950C9E56D43A5A2679321
-:10749000BC45ADF71695EFF5A4B32B8C2798EFAB51
-:1074A00028EB0FAFAB3C1A33C3E312F0D8FB999330
-:1074B000119E464BFCEB72E1715F05D08D72AB30D3
-:1074C0002926F9FDBAA53F47A54EE7FA33F58367AC
-:1074D00064082F1B5F328DEF29B19E5770E5675905
-:1074E000E45D51F36CF78AD8E4AB2F2E34B8F1EC9D
-:1074F000E718DBC5F9147B7BAF1287701ABA7B43A0
-:10750000F67C0C9DF8603F5FE30CD8E0B6F5BF0950
-:10751000DFA5C9F730EE195A27D6B5F58A4EF656CB
-:107520008C8189F99E6B845C2A019DEE67FAA657CF
-:107530004A8B3F84D3AFB74A797AF83D2556BABB18
-:10754000F2F3AC7C50D29FE7586FCCFBC07ECD7C71
-:10755000BF56FF797E2C7CA9F5BCEF5E2DE937F292
-:10756000C70CA5035EDB3D1683E4AFF2E11080217A
-:10757000A632D3AB18AF657384F279EDF54F1BF4E7
-:107580007B632FC16FE8E9EC5D465EED27C3439254
-:1075900040EC935BDB679C8742CFC942AE9F1F00E4
-:1075A000FF4CFCCD2A77D8E6CBE0F8EBC5798FEB22
-:1075B0009EA2894BB0ACF33ED37810E0F85EEEBCEF
-:1075C000FFA4700EA98B02EA3357300A51B6CE17CA
-:1075D00005E3B44FAE4A3D31F4C7D89C0A219F77EA
-:1075E0000E09F1F3E3A67A53593B67A923E6C43C9D
-:1075F00010089FC0FAB12074617D8CC7ECAD4AD5EC
-:10760000532588A0BCAB054A04DF1BFDE54CB1F651
-:10761000C7CC04D97C1ECBC817205787E1EF9CCC80
-:10762000FC53D6DEC5ECD03DE9F44916B743B39F11
-:10763000F3D279435F44D551248B26E894175CD468
-:107640000861F4E72A3ABB21CA3AFD26C23111BFCC
-:10765000C7E9DE85A25D71DAB7CF77F373EC454DEC
-:10766000716981699CCA2C2EDF53E778689DF87A8E
-:107670002DBFDFA23BB8305E8BE3D5F07D2F5FBE20
-:1076800002C3183D7CAFB9B9FF392109E67B23DE7F
-:107690006E85EA45A301DE6DF5D0F37C6B809E819B
-:1076A0008FFE279DE75B33715208F3472FFA1A4785
-:1076B000E2BAF17E6B90BE6F7E301CC27C22F9E490
-:1076C000EB749F444ADE6332D430BA4D486AC83FF7
-:1076D00013FE7BBDA67DFE3EBC18BE0BD8381B2515
-:1076E000C7ED381E9617929C7A649729FFC325FC34
-:1076F00046E71A883C5585F797E8D2DD55A6F75E30
-:1077000066B7E1FA3A31407C4FD1536F13F4BE169D
-:10771000FDDDA297045DE7D45C72DF64536BA27B4E
-:10772000FAE85459CD70EE6DB673EA0D591837C2A8
-:10773000439F6CBC69732A8722BD1E755ACF931B69
-:107740004F39303E5C8E7563450E9A87E27E959583
-:10775000578586E69AFA9F2DE4523EF923A26F766A
-:1077600015CF0F617FF545A6FCFF926823BFC7AF19
-:10777000859F9331F62147DE9A6CC32D8991ABAC7E
-:10778000E767668AFB504AD73828FFB57432E9505C
-:10779000286D03CAB3DA2787AB51BE1F835772F136
-:1077A000007B09836F389BAAA5316B3FFB16D7BFBF
-:1077B000807100E37E95D5EDBCBF11A1F0A910C684
-:1077C0004FAA1C642F8F84B007FB1FA93A00CF1764
-:1077D0008D02533FAC3CBCC5DAAF1DDE529FC38166
-:1077E000F10E039E1170C4A3E553FFA0B3F625CCA0
-:1077F000CD2B4E039F7D9C5146BDB1D5D509483355
-:107800002EF4B4E1BE50BFF107E8B7354BD8E13EE6
-:10781000F0A33EDF2571FC632FCAE103C8D7BB0F7D
-:1078200052BCA6646527ADEB9D59DCBE5BCBEC0179
-:10783000D589760A7B8ECE2C877280112E87D68FC3
-:10784000B4F2F76456EDD62C8C87654DDD8A7298BC
-:10785000A584BE82FCC83AE504DCC7CCD2E234FF82
-:10786000A09CDB191BABCA7270BE65B5B8D2FA6BAF
-:10787000ED594E826F5796A4605E28932DC24B69D6
-:107880000A7D6B262B7617688FE3387F2E88D2D33C
-:10789000781F5CD81042F99CB6A48AE25FBD9D12A5
-:1078A000C5BFDE927417A66A2F9BDB32EE46468F69
-:1078B000D9B9D127B0DD1239B1D6C9E0597E6B4BA9
-:1078C00005D2A71EF3FD0A70B818F7074BCE841532
-:1078D0003C1756A2249C4CBE3D8193AFF167AC1679
-:1078E000E5DD832761183FFDE5DA3BE837F9C43968
-:1078F00024197A629817E89F0270C6C437F4E9CC5D
-:1079000065DCD3359733D17FA0E722D6F6CC685C0F
-:10791000E5C39A4476814EF47305C2E3104E39787C
-:10792000AAB0DCB4CEB9057EEE690BC5FD489AF06D
-:107930006FC260F66FDD022FD4E1674CED9D416BA5
-:10794000590EFC75F130EC6EE9A7FF7E0EF9B8FA1E
-:107950006927C53DA73DED4CDCC0CACBF748B4CE86
-:10796000388E73BDFEFE7E89E67DC2E7223DF05E65
-:10797000C043E56677F796CFB172CFD332EC25B22C
-:1079800034D07D52E78CF5F4282F2F160ED2F23D1D
-:1079900027E6637F8D47DD80EBC4F21F2DB9E973C5
-:1079A000ACBC84C93156597EA0CD358C95EFD2A59B
-:1079B0002E2C5F980A2467B13C978E792D17FCDD39
-:1079C0008537ABB48E41680CEE6F7717CE65F2B891
-:1079D000547F6A26B65B7A48C2482AC3E3C00B4587
-:1079E0000CAEE5DF91687D5C76309BDFBD22E877E9
-:1079F0008EA17203FBBE92E189FA7009C46722BFAF
-:107A0000961FD8E632AF73EFB65652EA87515EFE44
-:107A10001D360E6BB7E27B5218515C81F90EB85ED1
-:107A2000FEC8DBB04F45FCDA5C153EC46B9D0BEB2A
-:107A30002DD1173CE30D217C7B5C33D9F7A5BBF638
-:107A4000B8165721DDE0765C57971DFC0CBFB3C01C
-:107A500080AB53267F6165AE672FDD6BAADAEE47F8
-:107A6000E9830B2C702D157A83F97D2EF379B76796
-:107A7000B273494E971D942DE318FC8F9D067E1E10
-:107A8000ED273E3A8F66F0CF58AF0CFEAD342EFA9C
-:107A9000537A26A583670BF283C11367FE0D3E1F41
-:107AA0006E0DD2F3D1D610F1693BD2710CCF4BC120
-:107AB000F76CDED6E23D687E0D2F0403C8ABD76AB3
-:107AC000310F332FC2CB85B746A5D025EC74E3B96F
-:107AD000DD195D8046CE94EC6FCF50983FB6DD1532
-:107AE000BD1B43D60165EF8CE96CCD6BCA8E4CCAC9
-:107AF00036EDFBAD15F7275D931D22FCD716B9882F
-:107B0000DEDB6F9BB44FC49F689DDC7EDBE22730D9
-:107B10003ECEDA7F3E1BFD0BB1FF97A97DE1FC1A3B
-:107B20004BFBC2F98D46FB99D4DE73E9F6DBE75FC8
-:107B3000671D7FFE52A3FD4D04BF7A69F80B6F9F4E
-:107B4000621DFFF6266ADFECE6FCEDC9F550BE7556
-:107B5000BB379C407D4C17A94DC07CF28ABD58CFE5
-:107B6000587798E6D7307F5B3D945BBD01CC72348B
-:107B7000753EC28179596639CAA9C9B2CCAB5C2DB0
-:107B8000CF521E5237CC52BF205266F93EB4E16A42
-:107B90009B5CAA747E91CA08141AE60C4ED7301763
-:107BA000E9A3DA61DC0EBEF7B897CAF75EC7F1BB8E
-:107BB00077984AF3186146BFFC5E57F41AF3BDADDF
-:107BC0000C2F093773EE54A3F7211EA9F72107BE26
-:107BD000CF12F94E596E207DB7AE74D2BE98899EF1
-:107BE0001DC3993CB0727BB68BD35DF061DDF0C5EF
-:107BF00041B3BDBE76B8AB01FD0D7C7F878AE345FE
-:107C0000D6E278CDAE9E0AB43BECE3B8CB6A2CE367
-:107C1000784634D238DBB2793CD518C73DA2D1368C
-:107C20008EA761AF782FC67904E52CD338EBCAAEA6
-:107C3000B3E23362298DB3DB36CEBA114B6DE36408
-:107C4000717CD87B318E7EA971DCA3A658F119D93D
-:107C500044E3FC931D9F914DB671541A07DFE3383E
-:107C6000CCF00DE17D592E77CF62E2FF4FBD64E786
-:107C7000B8DCD127C9CEF9B597EC1C564BC37A5066
-:107C8000C9FDDB7BB2F3F8BD5F598CFFAA99CF31F8
-:107C900091771023BFF84E0122E80C22A6DF560888
-:107CA000195C7468F688367C1E9D165C80FEE8A31D
-:107CB0003E8AE3BD7F749AEB8E34FAE8CEB8F35C6B
-:107CC000D224CF7D7A55C46383D97C1FD2289F13D9
-:107CD000F19F33182762CFB79C40FED059112F4A2D
-:107CE000C1DB46EDCE897DBD73BBF83A7571DB69AA
-:107CF00027BF37155EA96270CF1368DC19B7DE9312
-:107D0000D92CF8D1F323373F07045A31DD8FD73907
-:107D1000C4122FFCCDF17F7881E7DD4131DEF7FB26
-:107D2000D58EA79EC76AAF4A0B86AF64F8361CD9BA
-:107D3000E62C66E5F79DC9F961D5D44F8393CEDF74
-:107D40001B7EC82D51A7C57EFE5AA3B57C9BCD9E38
-:107D50007E23BBCCD89FE5E3867427F26B1EEEB181
-:107D60003216DE864F4ABE0B10BFE607785B039ED5
-:107D7000E6FB9D90A0F52E594071CE5801C569A231
-:107D8000C6BA65836FBED3A345183FE7DF27131D2F
-:107D9000EDF0268F676B0EE6E7243BFF9713CFF1DC
-:107DA0000C04FFEDABACDF21E6B4DC4760C8C15783
-:107DB0001A6AF79D35C9C72DD159FBCE5AE834DB75
-:107DC00052BEADE5164BFDDB572DB07C5F10BBCB33
-:107DD000F2FD8E8EBB2DE53BE3F759EA2FE96CB33C
-:107DE0007CBF4B5F6FF9BEECE0364B7979D70E4B19
-:107DF000FDE6A37B2CDF1DC7AFFA12F981BF94E922
-:107E0000BCF31FD5735BD07EFB6340A1FD9CB7C55F
-:107E1000FEDDBBE23EA015287B9371FE8CF7A0DF50
-:107E2000D09CC5E633B325C6A9056B3BA6A01E01B1
-:107E3000BA5AA35A2D5E1B63CEEE64713E51EE74A6
-:107E40004162086EAFA4E2B03D72EABB9264DFC744
-:107E500067FE2E772A69BF2B49256DBF17A49E0A9E
-:107E6000B41F63AFBBD39E034FCD4B28864BDC2F93
-:107E700079DE018D66FF6D9ECAE3432F644F9DA797
-:107E800016D071699AEF4D878BA6A2DFD0E44A54D1
-:107E9000A4DBB7E91BAF4BA27B03E7A97CBEDCA543
-:107EA000175BE269CB0E8EB2CCFBD7B2A237ABAC7C
-:107EB000DEF91332E959483C37E2CB63717C6D1E21
-:107EC000BE87A305B43EBEDAAAED3BCBFC80D75AF1
-:107ED000EBE8F9ABD6C8BEB3CC257CA3B581CABF4D
-:107EE0006D8DD233D9DA48CF33AD2DF4FD6CEB2A4A
-:107EF0002A9F6B8DD1F3EDD60E7ABEDB1AA7EFE782
-:107F00005B3BA9FC7EAB4E4F631E18F62E44843DAE
-:107F1000D9F78309BCDC2B70900B8D386698EE95F1
-:107F2000EA552F56A01DDDFB9A9BF26E33D1C92E68
-:107F30007799F9A7D17ABF58B7C6998DA7378BF330
-:107F4000C7EB803ACC91583FDA4571B4AC9F7E863E
-:107F5000EC71F65E017ECF7278769AFB3ED1FF46D9
-:107F60007E0DC427A3FEB96FFFDBA48555C89F32E1
-:107F70007EEFD773720BE7DBBEF097C70E4C3FB2B4
-:107F8000F98AFAD351FAE96F46607CEABD02839E12
-:107F9000DD2330B8A5A8911D2887BD47DC8457EFA5
-:107FA000B16C9E8F8241B541E4BF2E3BE8D5CDFA3E
-:107FB000617957AE6ED51745BA595FF49EDAE7C7B7
-:107FC00079BF3228EB67C7A37C68423EB8DC19FD55
-:107FD0002FEF2AD5554B3FD6726F5CAAA37B202189
-:107FE0009433F712F7A7AE0CBA689C770F8EA2FCF9
-:107FF00003E627EA6779BC53E7E30675B35C36AD61
-:10800000CAD6CF0E49C197A9DFBF367C0047E077BB
-:108010009ECCE771077A82F2AF2EBAE7ED98F32291
-:10802000AE3B6EF6BF8F295F48A1B2D16F73971C2C
-:1080300073E3795E3864198FB50B193EBAF9FE9C6B
-:10804000FE7CB7E683FF166589D66D7EBE3C8AE767
-:10805000CB597F1714B543BA2675BEBC59C8E57213
-:108060004FD21565AFDE3B32EA92F920EFB69E0A99
-:1080700028A3318F20EE4267A4B1EBAAE9A81FDF45
-:108080003BB2BA10E369CBE4DE7BD39D9BFD50E5A8
-:108090007136D09D3D49133E467C0680F5EB49C1C3
-:1080A0008F927ECE54B6EB6BE3E9F0F1B8FB8A43D6
-:1080B000A7677E8EC1BFE2E8072E84E3A81A75F891
-:1080C0004CF84BE27CFDD2836FBA10BFB79DB18AEA
-:1080D000FB2FA1A7FAC3A9062DFBA131E8C679BCE5
-:1080E00090FFF602CAD3577ECDA6E63BBF7002FED4
-:1080F0009E83B15F619C7B5804113FD26BE1916517
-:10810000141F7EE7992F0A7B2E3E09E5E33D70D4CC
-:10811000217EEFC1CBFEF126FA95FBB81F031DDCD3
-:108120008E31CE05327BD662D72CE9B49617C39C2C
-:1081300042D41B8B1F75822EE1FD9FA67B9818DE13
-:10814000F93E6EEF2E8196B568CF296EEE1F2C0C8E
-:108150008052CCF4E9F21F3E3609EDFECFF8F8BEAE
-:10816000A311C7B82B8FDB7B4BF37517EE27FCEE03
-:10817000C8F8799F43E973EB6B715D869CF4FB7FD4
-:10818000777458E11B087E3BBCC6B9F77EF1140139
-:10819000877C504A9B9F36D927E44EE891877C56CE
-:1081A0003B7F9DAD5CEF1371561964E4F37B014F87
-:1081B000CC9143DFE99C6DECB03BBC3A84F76A4557
-:1081C00022285FCC2E1807A67ABF57A3F4FEBCF472
-:1081D000D2623A67AE24C6513E9E07284FD125E4AD
-:1081E00041CEF28F836B304EDA424EFD6AAF7F2F65
-:1081F00096D7FAF839A8669CA7ACBFCDFE99A730F0
-:10820000AEEF8178422BC5FD6F6BFCDB1BB296B3E2
-:10821000713EA13EC117C88F3050BC28BBD25ACF87
-:1082200017B69697F6D129219BCF7DF83D6A027F3C
-:10823000AF026A94F366BB798587C30F78AF2AAB28
-:108240007F8FB0E757402846798B412E07F7CCE265
-:108250007913F7F842E118FB2E291A9D8F58874DA4
-:108260004DEB58F38712E826BDDEACF4B8502E9BD8
-:108270003F54E8FD6E35FA20D2D5051AD9B91E460D
-:1082800034DCBF56D43A8BDD0B25E27E405BFEC268
-:10829000265FC0E2EF197AC129F422D317EB7C05DF
-:1082A000A8077B66F27DF5A48BEFEFF07AAE54BDA4
-:1082B0004D0847A67ADE54BD6DE9EA2DFFE1779FB0
-:1082C00089B1F9BEF4FBDFF4E366DA3B4ABC10F394
-:1082D0001F9A0EACF1A31CBFADC4FC88F73B7AFA21
-:1082E000BCF79F097D87F94E785E7E85E0D3BBFFA2
-:1082F000B8F126A4FBC5034E3A6FDF7CD09D7033E6
-:1083000026AE38721797A783EE3779791DFDFE48A0
-:10831000F351EB7C5BFAE4370B43B4B9172B16F738
-:10832000B393FDBC62FFEF67A23DD20C3DA427ECE6
-:10833000ED70FC0FF368FD5A80E7FEEDDF8D7CAB3E
-:108340006621F7CD4736525E55F391599447D56C67
-:108350009BE78DC20F39EAB3FE6E83410FD0B95D42
-:10836000BCFA3BDF1AF72683E7FCFE5FF8254BFCDF
-:1083700088EB89DEAE3B1E7F369459BFBF2FFCFAD7
-:10838000543B9DDFFF7D94DBF1708C3F9B9C093F4C
-:10839000FA4D4D7B9C61A641A0E9BBFB9EF836CA15
-:1083A000F7EB6E8A372CFBEEF3AF5EC7CACB9E723B
-:1083B000E6D7733454CC0336F88267DC315FD7E0FC
-:1083C000C3D21F3CEF0A8DE5EF1FC84BF163D953B1
-:1083D000275C30B63FFDA6759D70F1F3E736BE749D
-:1083E000BD3913EDEED5DFF9930BE7D73BC7251861
-:1083F0005ADABF7DE39EE7C9AE433A111F059FFAE3
-:10840000F8D68F5F899B9E9D40F502B88E0DC4AF54
-:108410006FA3CC14905C7FEF59DC2FF8953B8C74E4
-:1084200068FCDED7FD88CF5B4A0B97EFC7D614E216
-:108430003E7AA3335618A0277FDFB8FB1B24774B67
-:108440004E7FA390E7416945FCF78C62451407DC39
-:108450007533E1B918A2247F8D8FC99487FE470533
-:10846000EA9E4A333F6EF0733DF6D65E375D7EF787
-:10847000162A5CF4175F96757EDE96E7257EC3D8D4
-:10848000F7C0FB1B59F98F1ECEAF02BFC3B8D7CAC6
-:108490006391DBFDEBBA914FEF0ED78662BC92D1B0
-:1084A0002126E826A11E924FCF18CAF90421659211
-:1084B00068C7F4E4347C8FF5BB9D9A779CA59D58E2
-:1084C000D7F8F8F788F119DC59689FBD55C8EC9DBD
-:1084D00034F82DF31BF39FD91F263933CD733EEFAC
-:1084E000F7AFE7F3DC98F7FAEC3AFCFEAFAFF079C0
-:1084F00084ED709D67702586D2F7137325D20B6EBD
-:1085000048A49BDFFB9D627E5BBF33AF9CEC5B436B
-:108510004E18FC0AAE5B2979E1FBBC8C0F64BF2DC1
-:108520007E94B537DBE7382ED573A5DE9BD6FB25C9
-:10853000421F5CE7B7FD8ECBAE8241DDFBD3E4D4B6
-:108540009FF836CE5F365F71FD69FAAE93F244FE56
-:1085500070E8B957BFCAE4FC0F5DC6BCB5EA53FB6F
-:10856000BC6D3C3C11D2CDDB3FA861483B6FD9FBD1
-:10857000B4F3564D923CFF47E953837E0BFDD63C46
-:1085800027433F66A2A35D3FFEC517227ADAF52393
-:10859000FB7B0526F5974343FE0CB95BFA4FCBE90D
-:1085A0007742FAE4D390BF3EF934E4CF8EAF957EA4
-:1085B000F6EF9F4143C58817B3A7F32188F9309E92
-:1085C000FA1399E2A917184C6B199F2F1C2AA5734F
-:1085D000C46BBCDC3FBF10E8F1E755D13D3854EE29
-:1085E0002970AD457D61BCEFF1F2F8F785488FDF6A
-:1085F0009C07F2E631D98FFB5D491DEAD2F9234C85
-:1086000023131C49C8F49DC78B2FA0FD87E3658DFC
-:10861000D0916F336475C42AF4F3E3FCBCFCA2B6BA
-:10862000AFF8711FFEC2B1515B517FDDF9A20CE2C0
-:10863000F71315CC37B943F0FF6D886D9FC2F0BCBE
-:10864000E318F72B166D4A2F2F4B45FDC5EA3D2E3B
-:10865000D44BCC2F38638E872F15BF4BD6B8CBF6B3
-:10866000FED81749AE96DAE42A2AFCC6EF1A7275CC
-:108670002D5C2BFC3687399F6D865CB515ED920B12
-:10868000A7781CB2F7984CFCE83D24F1FC278C0736
-:108690004F4679E87199F3D8CEA3FCA5B9DFA0EFD6
-:1086A000FBD3BF99743FABD2F4CCAFC7ED64CFF32B
-:1086B000CFBC5EF1632CFFF09F47FC1AFAD79F7680
-:1086C000FCCFB49F7DE1B89BE0B870FC6723EEC798
-:1086D000F2B36EBAAFE6C2436E9EFF79DC47F7D6BF
-:1086E0005E18CEF38556FFE44FE3E8BE3EBCC99D5D
-:1086F000F1ED353FF7C77A8FFDDB6F317FB8F79823
-:108700003B8478341FCFA6FDADE667BD14A7B9F052
-:10871000933F4D32E7335D293E2BC47D88177CD0D3
-:108720008079CA1772F9BE41F38F27EFC37344CB28
-:108730008F9C70E17ECCB49FFEFB38D43B170E7348
-:108740007BE27D677237EEB3FECE7FFB3A27C677BA
-:1087500071BD1E06D09AA3DF88F7E1F4A70BA7C36B
-:10876000054607C48BD1A511F565267AFCEFBF5BE2
-:108770007A7C301FC76F3AF6599A3729BA481A7F60
-:10878000EFD3F16813C39FBF3FFEA771681FFDA120
-:10879000AB8DD6F981F02ECAF97F0D6F293118BC47
-:1087A0006BFE6EF1E6F27FDC1FE2797FB679D05F77
-:1087B000CE7F782F95BFE70B13BC839CFF0D7FB74F
-:1087C000F87F42BE1F667CF70FCCF7FF92C3F78598
-:1087D000FFFEF01E88EF2F0ABEFB02988770E1278C
-:1087E000FF4EF17503FF81F0DEFE7F29DE863DB48A
-:1087F000C1118E9795621E76A23BC4E05C53392767
-:108800008E612959E45DDBE17A2187FB17B2C4E36D
-:1088100036309CC78F40F81B7DBF03A9F2F3558A01
-:10882000BA96DF47A684E97EBD0D572F0C536E071D
-:1088300054BF16C572C914FA7D5BBBDFD52E8126E5
-:1088400031FB4FB9FA0BA7D0FE77563A12EE71F40E
-:108850007C139FEB44DCCB197059FC0DD5E62778CF
-:1088600043D6EF6ED19F07AAE3F8FBDD1E5509E85A
-:108870006C7CB5364EF8606E67DCB46F88BF8F9D38
-:1088800030F9637BF107024DF6E4E5D2EF4F39DCB6
-:10889000FF94A5EA6ECC8B85AB1CFC7E73E0E78A67
-:1088A00037948475BA8F59F897297AAEED463A2AEB
-:1088B000C0FC438E1FF99520FC494574A1543A34FD
-:1088C000AFB59EF09706E40FE7C78826C19F9516BF
-:1088D0007E18F44FC3170B3F0CFA5E2E5FECFCB012
-:1088E000D3FDE7393C3E67E793251FA480FB2509AC
-:1088F0006620FFECD03E8A8BBCF78F6FDE84F59745
-:10890000FD5806FCDDC4F70FF92081F357D15DE86F
-:10891000672D3D22535CF8FF002820961900800047
-:10892000000000001F8B080000000000000BED7D20
-:108930007B7C54D5B5F03E73CE4C6692C964F29AF6
-:10894000CCE4C524811834E0244040419D104010FF
-:10895000EE754011B451470810CC13A4BDB4D51F17
-:1089600003C1343C6C43E5A5453A202AAD5803A623
-:108970005E50D4411E62AB6DB4DC5BB46883A280F0
-:10898000F24869F5C3FB79CBB7D6DA7B67CE994C51
-:1089900040FBF577BF7FBEFC73B2CFD967EFB5D789
-:1089A0007BADBDCE9E4B97E0EF26C62E892B632D67
-:1089B0008C653256F77C3263198CDDBF2B213CA5C8
-:1089C00000AE2F7E3C940D61ECDCB29E4339703FCB
-:1089D000F44BC5F714760F750FBD0DEEDFAFB17B0D
-:1089E00003A5D171E435CD69626C046367F624CDCB
-:1089F0000CDB1953B6EFBB87C6ED98614E50A2FD54
-:108A00006C4E33CD0BFDFCF83CF40B253C48E93BA8
-:108A10001E634BF978BF50387CBBCD611BC2B77D5C
-:108A20008B250870346DFF8BC50F70543DFF9CA3E0
-:108A30001BE66BDAADB24809A3BF4B0C9FAB918428
-:108A4000A1743D8E57C6FC76A582B146FCD70BD7E4
-:108A5000CE8629CC01D78E557F511DF8BEF9A36E65
-:108A60006BF4FDBAE75F793104A8A97BE119871798
-:108A7000AE9F753DE560A534DE7D9614C634BB66B9
-:108A8000E88FE35E4CEB3B0ECCCB980BEEF35BAC8C
-:108A9000A963059FAFF35F4E32848FC138126E58C1
-:108AA000DF67F88F87B151CEE48C4FAF81FF47B2BB
-:108AB000919754B86E4F67ECBABE788AE22BC4E93E
-:108AC000F9DC179B43809F33BB3EDF8CF0D7FFFD63
-:108AD000AF9B7F08F863AFDA9C4FC1BA9B7EF91F4A
-:108AE0000EA4AF7C6F9A53A1F7CEE5B19007FA9D23
-:108AF0007B2F211C825BE75E3999EF85F59EDBF9C0
-:108B000095CB0BFD17BD323E0BD7BFE8D75559CCDF
-:108B1000DE3F1CE79630164ED0C315263A7A77C34F
-:108B2000A059D0DC2BAE31F4D8DFB93F1FE13C7B3C
-:108B300034C1978078827B8BCB913E40A7A1BCFD4E
-:108B400020E0B771C78FFEA20E8D87E7508EC98DCA
-:108B500074FD7802C2C9582487B911BF3DAD4E7B60
-:108B6000DFFEBDF43A02F4BCF61BD06DC70A3E6FBF
-:108B700007D0CDD1976E67F11FA04F13D22D294A90
-:108B8000B72F58F0E79E226877A6135DE3E12BF23A
-:108B90000DF055ABF0F16F70FA7FE044F9D995D440
-:108BA0004BAF2948AFE7BEC86740EF53E69E7BD87E
-:108BB00070C67A5E49706E85FBF7BFF24792937379
-:108BC000BF7EC78274843FBB02EB3AC77AFFBA709C
-:108BD0009D8D8A58E7B6E44882238AF7C6F0D48987
-:108BE0005E07DD3F4EF7C39C7F117F39489FF0BE83
-:108BF000DB9538F4E87016D23A583893D6DDB0EDEC
-:108C00004F16E41B4927A48F320AE9757C02DE97D0
-:108C10007492EB8E1DCF897818A9A3DB362E877D41
-:108C2000E9DA636145F1E805F0E27B082FB4CF6D26
-:108C300049D094147E3F17D671CECC6676201C6145
-:108C4000E58FF1E8CBD8325ACFB3B17229D6772568
-:108C5000B9BC12DCFF285E9E703A697C899F335F45
-:108C6000C7D7CF8750CE01FEDDF6E041E41FC6AC8A
-:108C7000E11330CEBD4C61294551BC4978CF688C99
-:108C8000F4EE995FAAE110ACBFB5633FE9D958F99A
-:108C90008675F93BE2CCF747315FE3EE7D43510F38
-:108CA0009D797D0FF15FE38EE396108C7368FB0B6B
-:108CB00096EED228BFA3FE0EEBF4F7995FED1B4AA8
-:108CC000FA16C78FA36F4E88F19BF61AC76FDAF1B9
-:108CD00017C3F875A10E8BD37EE5793ED3FC3370B4
-:108CE000BD9F759919EABFCF3AD489E138F3BE29FF
-:108CF000EC97C453EB3B16B263C3DF4D0C27009EC9
-:108D000016BD33F14F291978B57801B5AC7329E751
-:108D1000ABCE87FC394897CE77EE52D19EBC88788F
-:108D2000BC2A3A6EC591E6AA6490DB8A6381E1C8E9
-:108D300056B1FA60E45193016E98270BF5F372185F
-:108D4000C70BE330CDE70EC0B8AA63C244844775B1
-:108D50009A9CB6B876958F67B6075810E03283DDD7
-:108D6000F6EAF8C93DCD3194A5E0F23C26D40B0BD0
-:108D700081BD503FBB2DAC4403F89829D1F7148C2A
-:108D8000BB70B0BFEC20B417CE71FB42F0DC731B9C
-:108D90007FEFACD31E325D8BEDFC30CA51D24595CE
-:108DA0007941F59D51DE9ACB40252409BECAE94898
-:108DB000223B93A4793754433BA956F30146D92764
-:108DC000F6605E6A26BE67A1F73CA98AF629AEDB8B
-:108DD000C11C286F727CD94F8ECBB4C8505C3FB396
-:108DE000328D815DC9651C6E55ACA7887529C8DFB9
-:108DF0002D531D5BB1BD29B996EC7F3EEBD9E7073A
-:108E0000BA3DE9987018F518FC6BC27E79CD46FB27
-:108E10003E60B1B15D10D262E4D76B0A00FF15B5B8
-:108E200019EF6754552E18E063EC9ED4CE891AE8EA
-:108E3000EF8C19953B7300A79357BECBDBCF5496AD
-:108E400079A0FD1F6B1A2669A047327E5F59960FE5
-:108E5000ED0B69DF9F44CFEB0049D783EA5F3374A2
-:108E600052A8342AB79900668A4AF27C23E2E16C60
-:108E7000E04C2B3E6D98FEA5051EE15F00F190379A
-:108E80008AE321D77E6C2783FE034CDD4B912F7F35
-:108E9000FECAFF4AC57E5EE6A4F53AD972E7A75638
-:108EA0005C3C1B7569D8E5F499C63E957CA846E5FF
-:108EB00020C515BC3515F8AA7556C98609A86BEBEF
-:108EC0007DC45F30B393ECA1ECEFCC20FAD408FA68
-:108ED000209C56E0B339BC0BAB65ED420F8D73E2BD
-:108EE0003C4AA85EBD74CDB7876796E49B64968CB8
-:108EF000F7B57A2FC1D595E99F83F8FA2A334857F9
-:108F000079DF3D6BA63708F8BD3135300FD7E199D1
-:108F10007B311FE19F92CA68BCAA79763FDAD50BF4
-:108F20007B41FDC5912B79DDBA84F9B441FD3F9FAA
-:108F30009616FC2E8E5FF89A77D76118EFDA1A8BA7
-:108F4000CF06535CBB78B84F4B677C41E87708BAD3
-:108F5000B991962877DF636194BBF3098ADF0FED3F
-:108F6000F30F38492FE7D64C398CF6EC7C52414749
-:108F700004EFFFD04BF2081E8082F290B7372562D3
-:108F800073103F7F19C3CF5F1AF9D738EFF94BDE63
-:108F9000DDDD349E538C070E113CCF13743AAF7253
-:108FA000BFFCFC122FC101EEE33EB4B7DF74BEB5C7
-:108FB000A9C24F12F479C8E65F87F400FC6FD0E3D2
-:108FC000FF67FDD37133F6033AD235968E73ADCD7C
-:108FD000F9A817EE0F744C008DCD4ECEFD5E053214
-:108FE000F7D4D4E036EC5F3FB3EB9099A0692E46FE
-:108FF000B9ED4B6785F4B96BEF7D4BCDD06E423A3E
-:1090000079FBD2F3DAC56544371D7D3B70FC6BF705
-:10901000FEC584F04BBA6E50B81D887DFFE55445FF
-:10902000CC5BBFD40CF8BCB0DB42FE6F6CBF83A935
-:109030005EEA27DB43AD153E0DE434CBC482F1C6B6
-:109040003DD8675CAB2F210EFCBDE339F97880FF7A
-:1090500037F4F8FF6DFFF8FF9DC0FFEFBE25FE8FD0
-:10906000209DFBC3BFF4BBEB847EA863ABC9DFFCD0
-:10907000C43FCD3510E69FA0DA491EE63FA5921CFD
-:1090800042FF291E57549FCCBFAE791FAE77FE1307
-:109090000AF16D4D90EBF9CFE74E3984FA7D4EBB66
-:1090A000D17F9A3B33644138E76D34DE9F1F8E8950
-:1090B00007994EAF035F9C89F2EF00AE77DC642F17
-:1090C00055211F55F34A53D05F7AD5ECFD3DF9E3A6
-:1090D0006FAA6C6B1CFCE7A715903D96EDBC664033
-:1090E00092CECEB31A9B09F5A51C77DCBCD22CF42A
-:1090F0006B16267B2F1B870D586CB4EB05A144E63D
-:10910000D58D5BD49666680F6ACF36F4BF6A63A1CB
-:10911000E1F9E0F0D586E7D76C2F37B487745C6F40
-:10912000E87FEDEEB1867659E41643FF6187A71913
-:10913000DA23BAEE32F41F797496E1F975DDF71B84
-:109140009E8F3EB5D0D0BEA1E707463FC6C4484F6C
-:10915000B24485F4E68125A72A4E20C30D57C621C7
-:109160003EAB46F1BE0716584C4E075E8B4D4EE0A7
-:109170008FD7E74C213FE0C00297DF4BD70A3FC6AD
-:109180003F4C1D333C18C7CF1DEF3C5D7142376F1C
-:1091900095D56CD073E39DC6F6B034113F0CE07CDE
-:1091A000332ACD285F6AF39488059AD9F30766E1DC
-:1091B0007C2067A3D3B89CD1F58A72E668AEC0362E
-:1091C000C859655A1C3963C2DE560A7E82ABDF522B
-:1091D0008E8C954C76D98F37BD743FA441BC32D666
-:1091E000EACB3D88EB32F9329009C7CD0C1CE0E3A5
-:1091F00009FBCC4A4CDFC63E4B39779BBC21B26B96
-:10920000698CF24B8FCD294E613AFCDE956612FADD
-:10921000A09DC791CEEDC33489C742FDFD8923B41B
-:1092200092E87D65DE942C943B773F7AD1E22E1A4A
-:10923000BC0DF4B1C553405779BF75A66962380EAD
-:109240007D1BD2789C21FDAEC151BFAB01F17BD615
-:10925000FDEEFA4180AFC6EA1EF2BBDCA6F605873A
-:10926000705DBF5179DE0C3C2BD40B73841F3D67BE
-:10927000D24F171C02FD34E7ED41A49FE43C9B96BE
-:109280004406EBFD86DC7EE2AAED029ECD4BFC831C
-:109290006B06115CA41FA49F9E1F6A9880F1CE00EC
-:1092A000D64C71E37A13AB8D37CE0A314E16921C31
-:1092B000E175DA494ECECE3DE6D0601D89C9C115B3
-:1092C000C86FB3AEEDAAE0FE98DF370DF8273F7206
-:1092D000F77AEC9FEFD65858E93B7F5675B0AD0052
-:1092E000D6B73CCDE4B353BB47C1FE090F32960E4F
-:1092F000FD97FF5D257896BF7E1DC3782DC1DECC1E
-:10930000D0AF95EBDA9FF638E147ED4C223BC8D061
-:109310002505FC7D57D0FE0B774D17FA1D5FAC3548
-:10932000D37C5FC01A9D30FE179D6A189DF7436974
-:10933000891113B4D5B664B2DFF9E88342FFB99D51
-:10934000C9616F41142FDAC6312C02F62E2197AF76
-:109350007F799A3D6C2FA075AFC1754B38E5BAF394
-:10936000FA89432369DCCE327F8981CE1E88C9BA4F
-:10937000706E0D9C7F18475D6BA638714EAA9DE0FC
-:109380000C2F090DAE31F75D5FAB7BDAAD77023C98
-:109390002D4754A6C238DEEE76C2C75CC047D8DB84
-:1093A00017DF67BD055F9A54823B82FCA86E9C4024
-:1093B000EB62E8D7C37B0D3F57D8E305C897C18957
-:1093C00044E76C137BAAA0EF3ADE48E3F9DBC369FC
-:1093D0004EBA5ADCC55C4EDC03076F83F1DE423DBA
-:1093E0006565F1FC80DFA7717F9AAEB1FA09EC6088
-:1093F00008E1B8B051217A9E54C21633A0ACEEF603
-:1094000066F207A47E52FD2AF91F524F49B8408FD9
-:10941000BD9FA6B38F6ACA834371DCFEFDB59DFB79
-:109420002CE8AF3919F96B528FF6E7AFA19F86FC94
-:1094300027FDB45331EB84F57D2ED6F779BCF5F5D5
-:10944000D1BF77354B3FE72F6997F133332DF1F5D6
-:10945000D355E99C0E4D4E0BA3FC14C6CBE83FCC74
-:109460003785B7621E4A0BDBA6EAF0939D2EFD3CC2
-:10947000EE6FF4A7F7AE149714AE2A25FD7BA1CBAF
-:109480009B9206D78C8F95E678E3A88B9F1D8674F8
-:109490009A6FAB4C4A07389DE9467C3DB6A28FFDDA
-:1094A0004A4FE7F8A36B1FFCD9017F26839FF86220
-:1094B000B197F0E749BF8C9F78F6B60F2BD02E9D61
-:1094C00013786AEC8D7BB99ECE06638579AD06E68E
-:1094D0007FF244096F5F5268D783F2759BED81413B
-:1094E000387ED3EE494FEAEDF7D7693C9FC6EC6969
-:1094F000946F95E3B984DE8738FBC64FBCA4FFBFE9
-:1095000044FA46E3EDEE0A8CB75A7E7D550AFA67B7
-:10951000E35EBCD389D70B190309AF675F4CF02317
-:109520009C67D3401FDBB13DF210E6213E5F7238ED
-:109530004D4F97B3BF7AA7C20CE39CDDF54E8586ED
-:10954000F90C91AFE9B54797FE501180F743635985
-:1095500049B35DC727566E2FD6DA78BE23D3656927
-:1095600065D7423C92994AEFAF73997E8CF755EBE1
-:109570001FF24FA09CC5E477D69ABD2D76E03388C4
-:10958000E57CB84FB070B0DF3307F33B53DD949701
-:109590006951B81E0DCDE1716846212B2980F1CCAF
-:1095A0002655C5F77A3CCCB715BA241C688FA0DACB
-:1095B0004BECEAF023F8C313D3089FA3CF38158CE4
-:1095C00027643E48ABE2E3F54CB784B7EAF240EEDD
-:1095D000991AD9C524AD83A19EBE2F338DE097F98A
-:1095E000A0AA6933039508D7C3268A6740F12AA841
-:1095F0000F73C43A0A3CBB5648DF4673215B324CBA
-:10960000FEB055C0FF0301CF0EAFC98FF957476EAB
-:10961000E4A819FCBB9CE58C7DA4F323932C42DECB
-:10962000DE5649DE92BFBEC93A13FCA3A4449E573E
-:1096300075045A17605E1CEF7FA71CE9C2DF27FA8A
-:10964000A898A662A11400397994715C49BFCE250F
-:1096500056DF4060E85D4B9C747D7A899BE0FAE9B7
-:10966000122F5D7FB2A484EEF727A757BA3EB2044B
-:10967000E6D5F153C648C00AAC37436524CF8F8C7A
-:10968000A8489915C71F90D7C7971C768D1B241023
-:1096900008F4C8AE776E59594074462182D5BDBDD5
-:1096A000C23F86B187CDFE050C586B4DFAD7E3302B
-:1096B0006FB54A31519EEAA7E96FAC08E5E2D54B98
-:1096C000744FDAFF1EC37CA76778BB82F2EEA96FE6
-:1096D000273E18DED5C582E2BE1FDA9E23FCFEC3FC
-:1096E000368EE7D58C4D4478ED0A0BE0F59C8DFB6A
-:1096F000839FDAB87E3C2DAE43D2839B518EFFE62A
-:109700003C5AFC3080672B7D3F1FF73B92F67F452C
-:10971000F96075A8C58AF2E1D97B9CF6415453B72C
-:109720008581497EEDD13F537E4DB5040A78FBD744
-:109730002BB19DE9086C41978D85FE3CE9801BE4C7
-:1097400006F9E17AC24608E578954DB443C7080F9B
-:10975000ABCCBCFDDAA37FA275AF3207E6235EB0C7
-:10976000BD1CC65B95DAE13641DBBEF4BD15876FE3
-:10977000C0B6ECFFDE8A10BCFF52BAD437010FEA44
-:109780008FDEB613DA43746D8DB799955FE5FA1ADB
-:10979000F67F752807F8B571AFD281A079F6AE5182
-:1097A000709D9EDD6B08DFF407F281CBA03CA935EC
-:1097B00064C1F79F5E72D8B91CE8ACA5B5B910EFCB
-:1097C00057B9837E7FBCFC44A6F47FA1BF3ECF1671
-:1097D00036F774EBFC710FE372C396837E88E35F08
-:1097E0000CCDAC3C9D01E3AC55822B55D433CF99C5
-:1097F0009DA8475817D74367C4582C9C4DFE4DBDB4
-:109800008D37CDCB822B07A39EB85BF361FC5C57F1
-:10981000D05E89F6BD6E4F816F298BF24B5D6A87F2
-:10982000AB1CF927D5D86E117997ACD4E6D4D452B5
-:10983000DC8F58938FFB058DACFD9E1F20BC6FA95C
-:109840000CFDF4D3FBAE4B190DED0668A3DFD0D0B1
-:10985000F98E05F9F3D10CAE3F1B3B817F609CD59F
-:10986000205F7E7064B668CE44D44F4FFB9BAF46FA
-:1098700017EFEB47FF6B920DE8FB4CA1DF89F47605
-:109880006798575AC1697CC6E21CCCCAB06D27FEE6
-:10989000AA2B33713962F6DFF835B1FF09EDE38F9A
-:1098A0004EBA459FDFF5E0BE0CE0B969933D644ACE
-:1098B000217BF3BFD1DE366E3485507F99AC5D16C7
-:1098C000A4AF1BF776893E4EC2DB22A9CF63F4F525
-:1098D000A24969B7607BD1C385CED065F297B51731
-:1098E000935858E71F3D9AC1E5B8560BD13E4AED53
-:1098F00045073DFFE7CD6763E161979BCF4ECFE51D
-:109900007CF5D1F988AEFBCB7FB37E20D06DD14EF4
-:10991000B32941C7778B768AFD6A9B3F0BC7C9B4D1
-:10992000308177F0F701BF5A416F3BA4819C3FD251
-:109930002BE703568E1B83748B3E67A30C7AC08F74
-:10994000F1E62389520F5C15BF7F624CFF42D9F6C6
-:10995000AD1C97DB179ECCC468DB0AFDB5FF4EE853
-:109960006D237C6B4C31E3A5C9F947D17892AF8E5A
-:10997000A757FE2634109EA7B65762FD46CF1CE6B9
-:1099800045BB8CFCEAD3E9FDE3E95CAE6B2F16190D
-:10999000E81DC57BB1E1FEC9256EC3BEDFBCEA454B
-:1099A000B43F791CF53C8EC3421457D56ECA616131
-:1099B0009D3FF5FFE1F847E118DD0F1C37FE0FC3AF
-:1099C000516090CF281C030DF7FF5138B6DE517C53
-:1099D0004B017459A784AC8568171E3251DE444D83
-:1099E0001DE75D8AFB0F0F69E4E7A14B82F51F8538
-:1099F0001A3BAC95A3FCB4FB31CE67CB78FE08EEE6
-:109A0000B799CBC90E911F5CB437E13EF4D30A6B12
-:109A1000FDF3F1CA724B697F43EE0B32910793FB62
-:109A200019839CAC5203E76D74E67D64A70A03D5E5
-:109A300075E8CCA9C9C313D13EAE338543385FE87E
-:109A4000A77CBE4C53B8C38ABAD731D089F62ED37F
-:109A5000C1F51F5B594AF66FABA9F0EA0500C7C311
-:109A60004A65E29B88E7D442CAFFE2FD85707FAB7E
-:109A7000B05B6AAACF89766AABB05B2D42BFCBFBE5
-:109A8000496981FBD09F3895B1E816EB75A887FC32
-:109A90006DE9606F4E662C5AE9F6A0BDF1165AC109
-:109AA000BE9C5CFB00D99BAD4BBDD9CED4687BD0AE
-:109AB0007F83B5263DF1C04AF45796DB17DE8FFE53
-:109AC0000E3CFF8D15F4EC336942EF88E785BD7AD3
-:109AD0000AF412E83175696F3B847AA9B057EF3CFC
-:109AE000407A67DB6695DA6FC37CE8FFC03A422AAA
-:109AF000AE7790467EBD0D604984B66D7021ED1342
-:109B0000C1BA5922FAD783F97399CFB70C32513EB3
-:109B10001FFB231E6D1EDEDF3295F9705FCB926C4A
-:109B2000A73844EE0FA8629F2A51D46928CEA91401
-:109B3000DF5957972FC478CC3AD0B80F6B89A9E773
-:109B40005063EB3BEC11F2BF4E6788BC7E3A735F0B
-:109B50002A8ADE07BD5D8E57D79DCB2B11DE85C9C6
-:109B6000CCA9625E2518A17DCE58BB66053BEAD51F
-:109B7000C987D5CEFCF1EA090E65723FD67E51A3A6
-:109B8000F866AD02FE0DDAD164CE67D23F323B25D6
-:109B9000DF1AEDAEF497CCA97C2D8B268DCDC2F8C3
-:109BA0005DB5FBADE8E7EC7396535E4065BE5B2B9D
-:109BB00075FECEF2C824CABF694E3FF9E145224E78
-:109BC000549D3EA6F7735A9740607915634F56141B
-:109BD0008F457978DC16B116217DD79928DEDB5FB9
-:109BE0007E7F48C1FCDB624672FA64856B2CE6D14D
-:109BF000B7688194BB515E8EC07C5E4E37BE9FDBE2
-:109C0000A260BEF80B6B2005F5C123C8F73ABC3C37
-:109C10002FF0F1F70CAE7F1E3673B968057822007D
-:109C20008776F11ACA6FADC9E4790F4BF538CAFFD0
-:109C300058001F98DF4B60CD2127AD97E7EB12DC72
-:109C400026435DA0767128BDFFF70C9321AE6E838D
-:109C5000757A75FACBC64294AF431C3F15C77F791E
-:109C60003B93C72356F087BCE49FC4EC73F7F58F92
-:109C7000C85F91F4E9F55314F04F2E138F3541BCB2
-:109C8000ACD7F74D5A0FE9DF268887F1FE39A79543
-:109C9000FC4359F76017FAACD51D6C1F8D7C9EE80C
-:109CA000188A79008D7510525663DD03EA43B7D6E2
-:109CB000D3CBFF20F32D36C756ECB75CD44124F943
-:109CC0008CF293C8DA237E94CF129DDC30C477885F
-:109CD000C64DF01AEF331664186768EED83A89500B
-:109CE0006F3D14D5F369EC31DCBF967E6F8EA847CB
-:109CF0003A9BF421E5D1C0EFAD4CA77D801E8A5B75
-:109D000064BEE7DBFAC9453806E61116FFB5E20482
-:109D1000CAD9D40905783F49E37C02AEB896508E83
-:109D2000E1D584F9A9B0FE3B85FDCB50DBA96EE4FB
-:109D30003511CFFECD39D3437114E093EA6D127D16
-:109D4000DD142F0A3F4DEDD58F7F5EE137FA9D215F
-:109D5000BD9FB76ADD9F572CE7F10AB55F7B3442A0
-:109D6000FAF3619B6CBF4C6DB073118C97D88B0963
-:109D70005EE44378DF8FF2C6EE28263F5B2D64D980
-:109D8000888F710E2BE94DF5C584ADE807435CFC67
-:109D900052BA6EBFF86CF2D17CF487E38C17328C28
-:109DA00097FFEDC683F93BB11E473E1FE7D8185118
-:109DB000F97B5E7C8FE5767D1882F1D7FD3A81AD27
-:109DC00004143E6E36CABBBC6E15F28CFA465F0FA9
-:109DD00069A9AEF123534BB94E7027B2888E9FA468
-:109DE0009C6B1707B3884E4E8A32F9BEAAA6F92992
-:109DF0008FA45D2CA5E77F4799A6799C579827AD3E
-:109E00009F798691FEE87F9E0AA15F98D8BFD2A86D
-:109E1000AE46EA85FEE43C769F2C562FCAABD48B27
-:109E200059997CFC7D99C6FCEBFD1B3B0E210B7DFB
-:109E3000660F1EC8A4FAA8630E34E1F5A6C850E464
-:109E4000E34FFADE6FC4C5BD95CEF3FEC5DB17BC8C
-:109E50008EECDA9519FC02FDA0DF648AFD4937D843
-:109E60004315ED1DD88B52CAE77E9181F9DCA077AE
-:109E7000C37886F27407E573535C81521CBF755A30
-:109E800005E51C24DCAB96F03A35A967ED5A90F055
-:109E900065D542FCEA0C820D67EC42A679B2A62099
-:109EA0003EB91C1D5D7781E4C0A6F989AF6C4E9365
-:109EB00017FD021BC485A877973A4D7CFFC66DA598
-:109EC000FC7FAB021122E88D85A98597DD1FB75C69
-:109ED0007491BD0548DC7ABDFDCF9F2743D807E3C9
-:109EE0003C9A93FB0D6C3FB7C388848F75FA58FA80
-:109EF00003B1EFC58E2FF129F16B45BC96923D8CD5
-:109F0000EB6FD85CC6FDCC2CA96F338F1647E06E83
-:109F100083D2ED40BF06F4A8CD857A7A488FC3E49A
-:109F200025FDEBE27E5048F035B3EBF95AE6A9E5A2
-:109F3000BA24FC0BDF9C63D5EFBFC4C21B6B67ED7B
-:109F4000A5C6BA059BD758B720BF0B50B500F18DF9
-:109F5000798CDF8A72B2D459EE443F67B9E6FDA32B
-:109F60009FEA2DCCE46F83FF6E985F5E1F01F94777
-:109F700038CA5C26435D8DBC26E33E4A9CF7A6BAF0
-:109F8000B89E7A64DF9DA487351FDF678AA51F63AB
-:109F9000EDC42FC9C5CC49F95301AFE30AE3F6C7B5
-:109FA000473FDE67233F591B650D635D67EC7CAA65
-:109FB00039E05750EF9631F293D53C3EBF3A885185
-:109FC0001DB863781A2BD1E1B1D53D8D9E2FCC748D
-:109FD00032A4B79A6C0AC4E31789A7812E93816FC4
-:109FE000DC926F3CEF17A31CE8F826108F6F06BABF
-:109FF000B8BE4238F4F46D751766C5A34F542F727E
-:10A00000BEBA125FCC4AE27E4EA785EBCD06C411E4
-:10A01000C44BF5999656CC7F9FB1F2E7CC5FC2FD59
-:10A02000322BE7B95949F961F4873A357F12FA655D
-:10A03000B37AF76DFDF4BD47BDCD9F721DDAC777CA
-:10A04000B8DF7CB2D2DEA6C03827CDFE14C4F7C973
-:10A0500077546529ED83F3FA39598774D2EC5D752D
-:10A06000353C9FFD33D5BF941E1BFDC133CC3FEC67
-:10A070006DF48F77ABB4DF52F0D3FBD421D0BF06A1
-:10A080001C45E4A75955F610DAE1CEF79B3F447D15
-:10A09000347B73827719D6B16C1CF625B63F5D9D73
-:10A0A000EC4DA03C5BA1E2C1FCD79A0227ED9B2CB2
-:10A0B00066229EBB7D7215E8D05FE2D4327F0D6BC5
-:10A0C000FE94C9E7A155E3609D5767769AEC00932B
-:10A0D000B221B4CA0AF47B7869C08DF163876BC67C
-:10A0E0002A8C1F5D2E7FD74D102F9E70DD3919DB16
-:10A0F0009D8FCBF1EE5AE507BDFCB22958A0C0F305
-:10A10000A4AC072653FD6A911CBF959ECFFAF95562
-:10A110005F1E85F1CB366C9C8C39B78A6AF17EE87C
-:10A1200009826FCE18D9DE9A543510DE4F62863C14
-:10A130009A391A8F529EAEB3D7BF7A7A32C69FB37E
-:10A14000C736576930FEB20D3B569582888C6CAF8E
-:10A1500074FAA1FDA30DAF4F4E027EEB64FE3A8C64
-:10A1600077576D3830D97A038C9F6E1C3F4315F9B1
-:10A17000D8D0E15598C7EB858FBDB7CA3F30DA7F9D
-:10A18000983B61752837CAFFFF2AF81FF8FD572E44
-:10A19000DC07B4761FC2145DFEE21E0BAF7B15F523
-:10A1A00029B9DD4379DD8D689774F33A65D976F383
-:10A1B00076E7B2F8F6FE2F6E2E779D89F19F7F2805
-:10A1C000F439C0EDC7FA9594A3CCBF238E3C1D741F
-:10A1D000D949FE0E82BF674D8BCAD5AD20DBA3B037
-:10A1E000FEC7CAE194E3C4BE7F4CE82716BA350D1A
-:10A1F000F9788AE0F3229FC2EB7876278507A1BF22
-:10A20000C722DA6DB09EED229FB1DDC6EE9D0A53E6
-:10A21000BB12597027FA9FE9D02EA5F7FD3BEDD16F
-:10A22000F1DEE2A2CCC61705B6E178E3B33C652DBA
-:10A2300005D17100EEE5D67203DCDAA8347C1ECAC3
-:10A240005E50AAC367295F07F009E10BA679F626DD
-:10A250009097CEAEAB0B57C21256B9BC86B8AFA220
-:10A260006B1A7D97F29F6EEEFF302F7F3FB38AD738
-:10A2700085F4EC49A23C05B37615239DE47B1705D4
-:10A280003EAA7E346503F6ABEF3233AAFFDF59797D
-:10A29000597FA01EF37A3AFFB15E8B503C578F79FD
-:10A2A000BD6138DE5B16B463388E57E4AF312F974B
-:10A2B000D9129FFED21ED65F4C65A1617DF56674F2
-:10A2C000FC0C7A7EA57545C733C69D7DC7B3887DD6
-:10A2D0000081774DE0DD121FCE0159824F01DF264C
-:10A2E0001D7FCD11FC06DA93FC80732F0EDEBAB20F
-:10A2F000403F2FFFEE06F4F3B337A1BEEC4AA4B8FB
-:10A30000A542F34FC6FE155D69B4BF20F943F2853F
-:10A31000A46B675A33E56B7A1E53C80EC6C2552C20
-:10A32000E1DAA8101C59D541F53E1D7C521E60FC97
-:10A330004E31FEF051243F4F707900B9B91BE5173B
-:10A34000F72B711DBEEEA1D386F485FF2768FF466B
-:10A35000101D39FE7F6D13F51C1C6F7DF19F730579
-:10A360007AE6D3F38AAED7699DF5FDC8ED5B6E073B
-:10A37000C1997534E2F042BF4705FF77767CEC184F
-:10A380008D72B15B658A97AF1BF55685D4C76CEEAD
-:10A390005B6341FF65F5B6415F7A910EBDFA3362AA
-:10A3A000B546FBBFE29E3B65393CCB48E0F29AA143
-:10A3B00082B5298FC2313D8BFB59A382F1FDD27743
-:10A3C000DDC9F45CE2FBB1C555EC6358DFCF5C7CC2
-:10A3D000FF7354774841BA48B98ED5538BB2B83C15
-:10A3E0002EC8FA7FA4A76C57D05336A9A7F8FD83CF
-:10A3F000101C613F97AB7BA802FE738DC9EFC2387A
-:10A40000ECC43B3FA0EF38E689BA952158B7827675
-:10A41000F36880ECCA697CC8EB571EC218704EBB4B
-:10A42000B17E856DE3DF89C6F255948F42C27F17F6
-:10A4300070087B706B42F7AF7891B1519E651BE05D
-:10A440006C3415E99EDBB9DD9274007A2F6769518F
-:10A4500039FEE8C5AC2DA86F87B9795E31A3C85F16
-:10A4600086EB9772097655F089E9DE6976AE37A6F4
-:10A47000C5E1DF27847CCED9C8F9A6F3BFAA26237D
-:10A48000DE3BDF4D4B5DA6D3134F093B28C7957AC2
-:10A4900048BE279F3F29F8637B9683DA4FB99245E0
-:10A4A0009EC714F7BBB9A774F695F8A78DF30FAC48
-:10A4B00037A4E7EF616EC5605F7BEDAAC0738305CB
-:10A4C000F00BF8DB6E0E6563DD4E459789C6ABD9A0
-:10A4D0009D4CF580351D1C8F35EDFB4C753AFCC449
-:10A4E0008EF71F59DC1FD862E27544074DC06F8894
-:10A4F000773B87EFDC8B1ED29F8745BF2BDB8D6FB1
-:10A50000A667B658781D29D097EAF91A5ECAD962AB
-:10A51000D4D34B05FE832DF81D5BC606E6C35A2B2C
-:10A52000C0534401B867B885DEB1F82DF8DD6ACFB5
-:10A53000638CF6F30755FBCBBCD06E0AD8CB15184D
-:10A54000AFB89DEBE18AB5E0C7A0DC59A55D787393
-:10A55000877EBE6359C9221EE1FC5CB391E36F1094
-:10A56000F83FCFE215C6F915F9F11C9E8FD6778C0E
-:10A57000C6FC937CFFB4A0FF95E0AB40F88647E1B2
-:10A58000C3F1919F983DB00CC76DFCC3AE1CFDB8E4
-:10A590005F66717D9BA1CE1A6B433DBF06EC0E49F1
-:10A5A00067703F7E9750B337D5B992913C9B30EEA0
-:10A5B00091F3D6883C24C85DC554585A71EF3C923B
-:10A5C000AEEF3DA75FBFE6E6FEDC3F8BBE9D96206B
-:10A5D000ADA76727C0EB8DE2A5B3E3BE6536B41324
-:10A5E00047990FED8484775075B703EB4E9A84FD3D
-:10A5F00080F59A307EC9F89997B520DEBAC65A30F0
-:10A600007E8AE56B49A712C6E547C66925B84100B1
-:10A61000ED3CF750A17F18C5BB1FBDF4CAB32B2971
-:10A62000BEE27469AAE674AC740767B833A3720813
-:10A63000FABC02F555CDDA5E7DD4C1EF77E557035C
-:10A640003EAF754B3937D22523D061C37D0DC9D7B5
-:10A6500067F70C09AFE474A6F93B3B92C38A82DF2B
-:10A66000A1362FC5B85BEA0984475F8729E1E9A5D0
-:10A6700023033A0E89DE1F54CDC76B0279473EAAE9
-:10A68000579B158F427A80F2AC59A807A09DD5C17F
-:10A69000FBB1BDFC5C0489A7FA193028C49D7E7704
-:10A6A00029AD43E22BAB3A62AA875B13AD55FE138B
-:10A6B0003A7FEDB0D86F40BC4CA37883EBEB7A3592
-:10A6C000908B712BCB4AA0EF38C10E917E39686315
-:10A6D0009A0DC67B03AE6897C6AB0BE83B9AF14573
-:10A6E0000AC931680099F789A03F7DEB4D4924FFE5
-:10A6F000ECEB0706E23A3393381FC23856318E9599
-:10A70000ECA0B007BFCF07BF4E89EAE5838A42E3DA
-:10A710001CBCE19AAD545B28F812C743FFE9A03294
-:10A720003597EC6567A6282EE2F0F76FCFBAF3F104
-:10A73000B93E5EC4F82E1A6F96ADBE19786AE4C4AD
-:10A740008E88C989D2317CCABF01FCE321DEB4C145
-:10A75000FAEF137C7DB020A43A10AE41B06EB8750C
-:10A76000283158DA6C8FCEE312F91B97A8DF457FAA
-:10A7700001AF260FD7FF3FF6707BF181B8BA1CF10D
-:10A78000F33D1745FF3FDBB99E5E5919FFBBED87CF
-:10A79000845D9171E7AD62BF03E2CE87DC3CEE14CD
-:10A7A000F5A77C7F04FC7BC26FD58FAA69DFEF8B96
-:10A7B000AEE929FC3C04AE0FE688FACF7B1F9AFE77
-:10A7C00013E4B31358670E78F844F0CB09A7DF8180
-:10A7D00075520D89F1EB889F14F034083C9C5CC2E3
-:10A7E000CF2F9883FB72C07FEBDCDCCF9BD77EDB67
-:10A7F00004A4FBBCB50AEDCBC9FD7F49E7DA4DAA3D
-:10A8000021BF3E07F7E5D2FF9178AAAC9F786AB8DE
-:10A81000219E92F3C6C6551F2D711BF60166B51712
-:10A8200089F32378FFD9CC4770CF6ECB31EC23B2BC
-:10A83000B6CC6FF4DD3FC651A1B8F0590CF73F5AC2
-:10A840006265213D1CA70652FDC443EEE0CB6E03BA
-:10A850001C492C64C8878E71D2F744369E87057FC9
-:10A860009CC73170DD62277F7D22FAB3BDF930D0FD
-:10A8700023CE14D44B95FBDD23A2F18394B3FA319C
-:10A88000F1E38875C20F5AE7E27172CA511957276E
-:10A890007A513F4ABF3CF6BD777BF9D7E8575E292E
-:10A8A0000F017C1CD2C749B1E39E72FFA3F177511F
-:10A8B0003FFC52FC3F127F578C09529E8FB52B54A0
-:10A8C000D332729C311EFA1AEDFA08BC2619E2A1A5
-:10A8D0009A6A633FE6E1F69F79920C7E7C7FF8D41A
-:10A8E000FBF14A11EA413E5EA3E08B82CFDEA57AFE
-:10A8F000D2311EEE178DC8F62778E0BA5AD493AF3E
-:10A90000B6F1EFF9B7FCF77EF76CF48FDE36D3FEC5
-:10A910003FDBCDF9A6F289452D783E80BD4371EA33
-:10A92000BF5FFD97C58ABF06E43A5DE8BB7A1F5F4B
-:10A930004FBD2F621968C7FA620E476EC73E45D3F6
-:10A94000F15D6E2DEF97E7311BF2E205A23DC0E30A
-:10A950009471CCBE4919D8DFAFA15F90DDA190FD05
-:10A96000CC6E66E457670F5768FC7F19BE45995D4A
-:10A970001A5D6F9B696AA913DE6B7325F9D0FE2CF3
-:10A98000C90E5EE541F88E4522682E471EEBD23097
-:10A99000DE5A93ED2F413CC8757A556736FAF14976
-:10A9A000C7387CEDBD79266E7F185B25FCD2ADDC07
-:10A9B0003F53D961C6FD73B2F3AE65256407E57AEE
-:10A9C0005C69C28EB85870979DFAB791DF62E57ED8
-:10A9D000806B5931F9F392AED1B8737039C69D4589
-:10A9E000AB23DA2C78EFA54DA6B8E7554C10788745
-:10A9F0007554EAD77125BD25FB99FBC93B4ABE4F6B
-:10AA00009A183F9E074B48CF2B9FC8B88BE473B969
-:10AA10008561BE5AE27F4D76E0768427BB638B82E8
-:10AA2000B8F948D4297C94C8F3F11FAD7C5641FF96
-:10AA3000F281F9CCA9B2FEE1AE5FACFA6BF4F2BCE4
-:10AA4000DC427491F14A141E9E8769F070FB7428F1
-:10AA50003B5083F46EDCBD86E2EAF9DB8E5B2EBBF5
-:10AA60000FF10DF1A6D4727FBD7EA695EA992A9FBB
-:10AA7000D088EE75CB2DB46F58BF63277D9FC61E5F
-:10AA8000643E94FFFA8E9D4A0DCC5BB763A73247B4
-:10AA900087C79CFA30D56F5F952CF72322E44FC708
-:10AAA000F237E611D07F3964E3F27FA6D21EC2FDF1
-:10AAB0008933E6603DF63BE349F2E13EA6C4FB1B69
-:10AAC0003B6FA6F30292772544F0DA66DAEAB642E3
-:10AAD000BFB6AB2D3EE4A735D9C1154897342DD06C
-:10AAE00089EFA76624FB707FC39BC0CAC97E7F43E2
-:10AAF0003C8C8CE18B910F72797959E817F8A37A25
-:10AB0000AA273DDC2FC7ED25D45787CC7C1DBB1869
-:10AB100087D7E4F16F443AB1C369346F767D44C19D
-:10AB2000FA8BD879A37CE5DFECC9FC3670765850F7
-:10AB3000CFD7097D53F9C436E5631DDCCF79548244
-:10AB40002F7BC71605F367F09CF40DF46758EF945C
-:10AB5000BD83C7AB75F07C8E4EBFC875C4D1339D25
-:10AB6000089FFD58D701AE67227CBF40C01B4BCF6A
-:10AB700088C74BF34F007781EE5B4225182F1F2AC1
-:10AB80004CA4F1A4DCC7CA69C4C3FDCAEC4DDB14F4
-:10AB9000939DF655C8BF94F0C97E23B2C71EF0102E
-:10ABA0001EBA080F0D9B345ACF784B60E0029D3CD3
-:10ABB000BC2BC67B7DC68774AECEDA7F7F87F8B1AB
-:10ABC00001E26C8A33DADFB14C473B13FA858AFB2A
-:10ABD0006093B98BC2D68B73A72677723DDCD0B950
-:10ABE000539B6D8FF269C167AFD379550D1D090C69
-:10ABF000E32BE0BFA3084F2C9F4AFC483DDB1F3DE1
-:10AC0000411FF1F829641179BE6001C63F524F9B84
-:10AC100084FC333BBFFF855857947F829F790C7A21
-:10AC2000D6467251F059F9EB58EFD9E053E8BC8E93
-:10AC30008C2A8E4F3D5CFA7830564F623E31C0E32D
-:10AC4000FBFC69BAEFBA7AF5BD78FF22D29BDB8DA7
-:10AC500008BFCF0AD17E4BF863E937309BFB6571A3
-:10AC6000F84CC91ED1D79E493B5FB0799786DFE586
-:10AC700048FE998C74D7F18F33DB42E33AB33582C7
-:10AC8000677D25DF8F5C6FE6766CFD522BD567BE46
-:10AC90007127AF174BBECB12C1EB41D3AC7A7C7E90
-:10ACA000309BC3D1665A46DFA9815CA66613FF3884
-:10ACB00018D78F5C1FAE7D81EBB3FA909DE2DFFA6F
-:10ACC000E0ED35540F9061F3611D2D0B1EB04C4F1C
-:10ACD000EECB57DE5DFB2C08FFE40E2E7F920EA01C
-:10ACE0004F89BFA43C48BC46F11936C893A487A934
-:10ACF000D79F0816707F89C75BA5E23BC25AABFF9E
-:10AD000090D98B710CCFCB968AEF09655E7696A0B1
-:10AD1000CB667BC087EBEC9397FD86F142DDE2DFEB
-:10AD2000527C76BFFB4DBA4AB985B8D620DF3709C9
-:10AD3000BA176773FB3E219BF34DDDF00E92CBBA41
-:10AD400013CD24CFF6895CAFD98FC5F88FEC11A154
-:10AD50008757D37BE3933A26E0BEF2F89F2B4E8CC5
-:10AD6000F7FB83731E7E8F8571DFA6FD8EFB10BF00
-:10AD70005F43D4A1FB5E67463697AF33DB01E1C486
-:10AD8000EFCD96CBF9E3571A8F458E28741E88C0F5
-:10AD9000E5991D55D77D82FB40DB537CF8DDFDE74F
-:10ADA0003B6EFBFE2700F7996D37F9D04FC8680955
-:10ADB00010FFF464DA7C5B799E7622E6B19676EC3D
-:10ADC00077E0F73DA79FBDB61CF576A380F3B317D8
-:10ADD000D4C5889765CF3C7F233EAF0B2BE9E8BFF6
-:10ADE0009ED9FEF3BF67C338B5DB9AF0A431D6F223
-:10ADF000EC6B141798C25BF8FDED29E4E79E7E72B8
-:10AE0000CD8D88EF968E167AFED9935BA8FDFA3326
-:10AE1000CFBFFA5FD0AF3EE0A0EF9E3F7B611FD176
-:10AE2000A53EA8517D7A7F7CBD7EE73EAE2FD1CE78
-:10AE3000A31CCCE47A4CF2B5E4DFD3CFDC7B9DDEFF
-:10AE40006EC8FB6D229FD396C8EDC8E7426EEBC675
-:10AE5000DADBF0FAF973363A9FB3D1D25D8C717EAA
-:10AE60007D29E78B07053EEA3B16981BEDF43E8DE6
-:10AE7000F39F20EF781D02FC897560D06BDB25AA5B
-:10AE800067FA15F5877EA330DF33A3FA38FFBEB328
-:10AE9000B4D95C47703ECB9FC3AAF5CF2B16C58FA4
-:10AEA0002FD767DB0DE7AA65774ECDF5921E48F0E8
-:10AEB0000DD2F9BFD9B5C19664B87FCBA2A00FBFA0
-:10AEC0008F7FE9D4BB13F03B86674A9461447F557A
-:10AED000E1762E64A7791A701F09E28FED424E20A9
-:10AEE0007CCDB81ED6335E6319F889EF78C68E988C
-:10AEF000492F3C45E3839F43FE9BF7B5194FA1DFE4
-:10AF0000B3DE1CF48CC071DA847DDCC6E187F79D6A
-:10AF1000F6721ACF793DF7D717E27BE7974EC94013
-:10AF2000FF1EC6ED32EBE231E0C87CB48F38DE7034
-:10AF3000C4D3C4D04CB2535E0BAD4F9EFB09EB1F84
-:10AF40007AF790A87CC6E69B503F617EF85076E584
-:10AF5000BEECCCE8D5D54FBEC69C03CFD19EE5F85C
-:10AF6000E9FA4DCF117D7DC6396EE75F3E4E7CDB41
-:10AF7000887C8BF3074F18ECBCAC7759BFE738F1EE
-:10AF80006DCD6EAE8F1B77575A30DEFA7C899F7D70
-:10AF90000C8E6EA3E0BFF54AF75CFA4E6C8F8DBE47
-:10AFA000FF3B27F9B3FDF8A7A87F0A777B289F709E
-:10AFB0006E0FE7D3832613E5010E6EBD664B8BD271
-:10AFC000D7AE82BF4D72D2D8CC84BFBDE85DF4CF7E
-:10AFD0001A6A793D7A630C1F156CFEA815F92515C0
-:10AFE000BC63ACB3017F66027D3F59CF46A09C662F
-:10AFF0008FF3EFC9A17D421E9F67D7823E81F62D58
-:10B0000019F37D78E455EA38F08B91FF326EF061E8
-:10B01000DE6C7D5E472BFACFA1F18CCE575D6F6E53
-:10B020001F8B71F0FAF15E276012F0B68DFC6B5643
-:10B030006211F6AC86FCF246F7777C94D78E95FFCA
-:10B040003D4BC9BF6BF426FAF0BCDBC9BB9585DC70
-:10B050009FB13384BF11F08BEDC9E1D16184E7ACBE
-:10B06000C09FC4E33973179DBB7BEED709748EE193
-:10B07000E4719C5F53C77590FE7863CFCD64AF25B4
-:10B080005F26BF9840763B4D732A98E760ECB60484
-:10B090008467B680A75DD4EBA60A3B52B49AFB71D5
-:10B0A00029395C9E52724CE26A117C2ECF6509519F
-:10B0B000DEE1ACA03FB189EE5CA7869A08C953FDDA
-:10B0C0000E3E5E4682BFEC011DFF4AFF4AEECBE218
-:10B0D0003EEDD438FC3D42C051B07921D17D76ADF2
-:10B0E00038F76135F72B18F005E20DE8487C704B16
-:10B0F000C63CA2DBECD5CA5D44C75005E53FA57F41
-:10B10000163BFE75627DDB6D81E158EFD79399ECBC
-:10B11000C33A82EDA97E13ED2394A5521E24339DDC
-:10B12000FB8B99C25F8CCA7D60B809E639E54AE6B7
-:10B13000F40EFF5EC3FCF6F81CAFF4FF0C7E5EDF7E
-:10B14000389F8F37A53D3414E31EB9CF2CF1115E23
-:10B150009A3853AF4F6F12F8080F6633516F403C67
-:10B1600061A73CBC13E6C17CC2D6D14FF27C023F42
-:10B17000FFB92487FB3DE3D303C3D14FCB2C0A2C6B
-:10B18000E2F693AF33161F87B2651C704F19C6B134
-:10B190008DB7DB7D28776B5F5666115F87AC7828AB
-:10B1A00010F03D97437098A8BE8D0535A247637394
-:10B1B000201C9FEFA7929C3582DF8771C064E4F367
-:10B1C0000CE2FB30E77B6EFF64BE01F5A4DEDF9688
-:10B1D000FA40EA19B46FC8CF522E1A6FEC2E46FA15
-:10B1E0007E53BD72CECCE5FC1CE001E548CA4DF2B1
-:10B1F0004B5C5E562EF556E2F39520F77A7AC7C679
-:10B20000670827C62B52BF2FC90E3C90837907537E
-:10B21000A495BE4115FAB8F1A515C5F1BE2392FA61
-:10B22000D82ACECDB48693C2FAFD12ACC1482EA75F
-:10B230006B08ED51D2E2F8F998D61C695FFBD4AFE8
-:10B24000B5223CB1F56B2EB45D283F5B93E87B36AD
-:10B25000999F8A1D77B1E037491719A7E0BE07F615
-:10B26000DF9AC3F9659DE8F76C8E22E4226CE07FDB
-:10B27000AF29781CEB0FFAB363F2BD7F56BE4CCEFC
-:10B2800023ED692CFDE5BE0DAE676A69FFFDDAF7B7
-:10B29000893830861F77093969CE61B4EE7673E458
-:10B2A0000B92AB05C98CEA7E36327F3AEE07BE7A46
-:10B2B0001597077F4F318E3F342FE8C81D11CD0BF6
-:10B2C000E37D8C4FEA34164A009AD46D3787F5DF58
-:10B2D000D33C95CBC73F9F6C0DA9C0E7FEBCE0BE39
-:10B2E0009C11743E087D3717FA818DF6B1C0911E0E
-:10B2F00081FAA589753B10CF8D6A5731E631AB5D78
-:10B30000C14348FF8F4C5DF9BCFE83EFB31D137939
-:10B31000DF6322EFDB6989E4FD5B46F41CBB0B8C29
-:10B32000D75F5DE832A5611CF8C1EE3F3CF732BC47
-:10B330007DF7CB67EFFE21626B65D23D3F836BB536
-:10B34000550D68BAFCDCB1E4F87AF6CF82BEBDF5E3
-:10B35000514B13E2E6FD9FCFE5FD9A62F6B59FCF14
-:10B36000E5FA34FA7D14DFD7FEA09FF3AFAA72B9D5
-:10B370005EEF14755BB1CF278A79B69B59F146848D
-:10B38000674B32D503308D9F5B56FB68810FF7F119
-:10B390003B0BF939F93DEB14B203C7CC5CFFC0DFBE
-:10B3A000EDD68AA81D453705FDC45A67286202FDFF
-:10B3B00051BB283982E765C27D6D0CCA5AC849F570
-:10B3C000C3B3847D9CDDFCC65798F7A8D598750C4F
-:10B3D000BC77D25EE340F330F7BB0FE051342CABC7
-:10B3E000BA5DD4998A73D8FC53D44B4997F3EB8C4C
-:10B3F000DF97BC901B30E7C2FAAB5338BEAB1FE0FF
-:10B40000E7F1CAFEBB85DD8BE5B7EDC8AB00EF8782
-:10B410000AB72FB1F364E78DED40FEAB76079CC809
-:10B42000C7D50F9C35E8B5734AF7D33F43BE5C9050
-:10B430002CCE4763F9FA3AA521B95C6EEA70DF0CAD
-:10B4400054E3F9B2AEE2C505C8FF3DF97FC4BCDBE9
-:10B45000DE04AA73AEC3FD33DD7E777FFB67FDEFAD
-:10B460009B792DC8E78D1715E293597BDF388A7ACF
-:10B47000BD51EB26FE9965B5137D1A2F6AF49CB574
-:10B4800099CFE8BF975BE4F65F83EB0BFD684C2A2E
-:10B49000EDBF65C17DC273099DB7B150D49767E711
-:10B4A00005CB11CF1B921CF7627C78C1CACF576ABB
-:10B4B000B2F03A7226BE43967CC272938D7CB0F78E
-:10B4C000CDAF10AE1A6B90CEA99C3313E26915E98B
-:10B4D0001619E12CD5D37FCCB73A27D7857A03E06C
-:10B4E000FFC0C2EB88FAF23FA7C3F342BF7C90CD06
-:10B4F000E5E8837C56BB0BAF57C315DEFBA050B409
-:10B50000CB793B769C7A21471F0CE5F62BB430298A
-:10B51000EEF920F708797C21D77F07E255DE7F52CC
-:10B52000C0919DE7BF13F108FAF16EE2AB14164922
-:10B5300085F1AA5FE3BF57C096F7501D6BEFBA8A3B
-:10B5400005BCAEF8702D8D8E5B83E3413F3FF9F172
-:10B55000AFDAE83B383605F435EAE785790CF533A0
-:10B56000CC5B8FF3C3B89154EA9740EB606DA0B702
-:10B57000817FCF8FF0125D5656029F0E17E7EF7B4B
-:10B58000A37C25F929968FBE9FABF4B7BFFF7D84BE
-:10B590002B767F9FB181446FE2B76FF13DD9E8749C
-:10B5A0008E1790FB965CB2BF91217AB9937896FA88
-:10B5B000F28344235F240A3AAE12FD7AF12CCEB313
-:10B5C000CA28E27650C60B3F13EB72C45CA55D8BB4
-:10B5D000DD1F7008FA3B7279FD14D06503C229EDB6
-:10B5E000611F7A6FE2F4867E9B488F25F4DC930E10
-:10B5F000F6EC0EF093F03C4B78CF85EFF5C95B8C01
-:10B60000E376B8696132433FE1E95C51F73DBC87BD
-:10B61000EFDF95F4903E9AC540EF2857A61FE60845
-:10B620003CA00F9FC7FA118043C17AA43452035E35
-:10B630001C0FF0BD3337338AEFD8F98EE123F00BBE
-:10B640005FCE15DFD995B132A4D73DEFFC35F96E49
-:10B650002F9E77CEBFEFFDC41E7C0DC739F3FD379B
-:10B66000290E38668914B7DBE33CB744366F50A225
-:10B67000CFEFFD851AC2DFB7E8EC3AB36E06F0E50E
-:10B68000AC2ED58753CE7AF08BB747A27FDD65A667
-:10B690007D28F02F56E3799FC7445D216B36E6097C
-:10B6A000FE24E82EBF3396FA49FA09F3998FEBA5E9
-:10B6B000447EBEFA470BE6D177C6352C7008CF57CB
-:10B6C0003FBD7012F9CFF35890CEF79EDD663C5F18
-:10B6D00037F65CDED8F37831A18FF88A3D97F7F31F
-:10B6E000EFC5AF9BE9CDBB57C5F737B43CCECF9F75
-:10B6F000F753AFFE37C1AFB2BEA049D617BC72F93F
-:10B70000FA82A698FA82A83F22EB0BBEE6F505AFB7
-:10B7100018EB0B3E1F1B1F8EAF7BFD9DA47EC675D5
-:10B72000D0FDCF0B2FBFCE263C6727EE77E476BA4D
-:10B73000DF5F7D43A6C4533FF51DA9791C4F4D170C
-:10B740003D067B9C99E78DF1C772E979534C9D4486
-:10B75000F439AF8F90F903A02BD5E3493F30F6FBC6
-:10B760007A99DF97F2F3B1C2AC1ECAB7AD11FAD421
-:10B770003714FDE68FD11F43F9BDD9FB6A37803AF4
-:10B78000FB87D7156B8551F98A5D0FF0E567FAEFF6
-:10B79000D807E789F3207CCC47DF390AB9B8E7FB43
-:10B7A000E353707FF6CF0F5619BE5FEBFDBEDD226F
-:10B7B000FD40BBC19EB3187B3F7BF79BE4E7D558A8
-:10B7C00003F41DDD27AF7C9FECFC5C1670A19C9CF4
-:10B7D0007FE5AAFCE0FF859D97F0DC16BACFCCFD93
-:10B7E000FB0CF24FA609786EDBCBFD4C93D56FA610
-:10B7F00079FCCCEB745108CFE105658BE7E8DDD02F
-:10B800000B7F299DBF3146C0AFE0FB80DF1BC49595
-:10B81000CD0ABA116E792E00709D1BAF2DD7F9BCE1
-:10B8200078BD4909684CF7BDE804D69C8BFD4DD620
-:10B830006E559C5746E7CC2744F145ED64D15E7EBA
-:10B84000FB857BE6E07D3B3FAFD822E0B83F4F7CF5
-:10B85000076D65565C77823D729AF60FC535349652
-:10B86000FBEDA1425E979C88E721C0BC76FBD91016
-:10B870002ED6C99CF49DBFCD792182F18BEE77261F
-:10B880001AF346E87E678245785EABBFE731BF4377
-:10B890009126E06B117AD283E71516D1B90CA42753
-:10B8A0007F9A3C97CE27CFB42FA27DEDC71C13699A
-:10B8B000DFD38588C77AFB89BA7315E07966C078CB
-:10B8C0009E42D64C63DB1334B6ADEC18D587299174
-:10B8D00080FB527AF4DC48B3D037B72772B86E4F8A
-:10B8E000E471DE237926833F1290BF0F93C6CF5DAC
-:10B8F00038E7B25AB14E03FC9347F2B87FF22150B9
-:10B900001AE249FEFB316537F907AD1B8EBF8BA2EA
-:10B91000FA96019D5A93BD4B35F4FBEE14BF23A656
-:10B920007550FDC3967B527D58AFD36A735662BE85
-:10B930003494C7F3444DE2BB0FA048DD0E786FCBC3
-:10B94000B41CEA9751D54379D69E158CFCAA3E7C4F
-:10B95000FA35F03FE0FB496CE3791035BE2EFC0E62
-:10B96000D8E357A96E593EDF86CF014E45F005DE7C
-:10B97000BFA922FA3B4F457BCBF6E379962CA8F87A
-:10B9800078DAD24BFC3E5DF8F34D7B2B6F1D0170D6
-:10B9900015750D23361EB857ECD3642488FD667EDA
-:10B9A0009E6F6CFF81D81FDA4987BDDFA9C7472684
-:10B9B00088CFF1BDB149B4EE23224FC5847E18195A
-:10B9C000237FA3A3F240CFCB44BB49D417E2191481
-:10B9D000FE0A9E06A17E195C3E7C4CFE71B9BD9E9E
-:10B9E00045FF709CAAE8B8A4A7C6451F47E5109676
-:10B9F000586EF5B5D443BF8353F9BEFC482DB20F42
-:10BA0000E57DB4B896892B9BD54EF85DB934F2BA72
-:10BA1000B90053320115DB15CE152D38CE0D4A84F1
-:10BA2000AEF933D7B4209B5D9D5F24F241C1F1286C
-:10BA30009FADE3F9F7D22DA37C3E273C9A3193E7E3
-:10BA400071A7CFB4521DF6748D9FEFC4B460C11DB1
-:10BA500020677754F3FC31B6AB75F919B95F7204FE
-:10BA6000E29B9D71FC83ABF3B95D93EF3789BA21FB
-:10BA7000F9BC389FE7CBECF9134EE771F8685FF833
-:10BA80007C9EF0D34A5849CCEFD1FC350FFDAFCAAC
-:10BA9000DFF6A7278CCF859E98EE7FD44CFEBDD0D5
-:10BAA00017522F07443D54973897E5BDB11CEFEF6F
-:10BAB00056CE277D713B6B267D7E070B9911BFBD4E
-:10BAC000FA7FA2CE3F8279A6078CFED28C99B17EF6
-:10BAD00015E75739EF9D41E3F369D2EF9D68F47B99
-:10BAE000ABFFEDEB54B28B594F375C1A10AD7B6A4C
-:10BAF0008AA97B6A14754F4DBB171CCCD4D53D3534
-:10BB0000EDE5754F8DBBAF54F7D443FB4F47CCE108
-:10BB10007DB82F73643E8804C0B95FD4C91CC03A95
-:10BB200099F2285F264FE3F959605FDA67C97526F5
-:10BB3000F9909FDA4CE594CF6D7324FBF4F9D3951B
-:10BB40004B81EF74795C59E774A49FB8B83C9FFBB4
-:10BB5000C1EB159E4F0FDD69A53830B32860D8BF03
-:10BB6000C854D951CC4B9E167ED07A912FC1FDBFBF
-:10BB700061700D2BDCBFE97D1FBF9FC23C668C3E10
-:10BB8000CA4CF7D1FE4166CA10DA0798B9B76C1BE8
-:10BB9000E91BBBCD87DF07C8F16706B768587FD4BC
-:10BBA000B4778B56638FF2DDF87CC1AF492C09F96D
-:10BBB000B5372FB82B81F2829FD80393F2E1FD7A3B
-:10BBC0004B642833F233DDEFCFAECD13FC621E1B86
-:10BBD000B8730EC073FE6D0BCF8F3DC8485E5FD843
-:10BBE000934A794D6D1A23FBB2BC92F1DF8BD9A237
-:10BBF000903F7732959F43B47C2A233B782E6D0289
-:10BC0000D16F3E0B1FC273866A37990DE709DDBFFE
-:10BC1000CDD8AE671D646FEA77F4E167D25B523F1F
-:10BC20003630AF8A7AA8B1D3F83E1B68D48F65C28C
-:10BC30001E0C9B3EAE05EB3C8699B8DE620FFA7295
-:10BC4000A651DC5DCDED287B9ACEAF3A9F7C4AE5CC
-:10BC500072CEF5F188A8D634D8A511C2BFBA51E387
-:10BC6000BFB320FDA511E277170E98F6AAF41B3F8B
-:10BC7000029EE1E23DE9A7497D2DE952390A7F3371
-:10BC800002E2F07CE1EF14B242A42B8C4FF2A060F0
-:10BC9000A0C48F4CA6DF6F182DE603BAF3F3EB4C6C
-:10BCA000D630F251ABD24C7ADACA84BE5682A4970F
-:10BCB000FF3D1452910FAE63CDB7E1EF818EB176A7
-:10BCC00025915F6A0FFE44CF272D2C92BF5331F090
-:10BCD0000B3D3F93FADBB8FC22ED4AE43DEE6F4C9E
-:10BCE00066E007C2BCFEF7B91F7440E1F122F88399
-:10BCF00007305EFCAD6912F1C3245806F61BEF3421
-:10BD0000D2F966B7B13DC9DB870F54FDEF5980C446
-:10BD10006908CFE412633FBFD46FCCA8DF0AD8D73D
-:10BD2000BCAE7EC5A1EF62DE2069312B413F063CEF
-:10BD3000475FBCDF2BDD85F68298A0CFFECAAEFC44
-:10BD4000117DF757CE8B3CF1F5AC7BEE0EA52FDFC6
-:10BD50009C3BB85875EBF84BF2F34BA21E43794D60
-:10BD6000ECE30EE7F9C2A89DE77C53215AD723DF05
-:10BD700041FF3F483D207E77E486DDB608FEAE4EAB
-:10BD80009918E77AE49FF2A85D8F98EC5E4B21F258
-:10BD900089AF4D55FBFAF3AE342FF1CB30939FF8BA
-:10BDA0006504F3A5239D46593B5A34847FCFC89C34
-:10BDB000A0DDC01F7FCC47FBA7007F503EAB8F7D2F
-:10BDC000343E8FE11F49C7C3C28FBE9979298E982F
-:10BDD00028FCE84801E79F2AFBED1ABEFF4621CF69
-:10BDE000378CC38D47FA6ED56817ABAC463E88E5F5
-:10BDF0002F98D1A49F3796DFFAE39B01C837D22E44
-:10BE0000A65F996FBEEA9F6FBEBA1CDFC4F28BD4E7
-:10BE10002B3B6DCE2A3BE6B76A15D2C7C3DE1ED8D0
-:10BE200082EDAB1A0AA85E6667AA6F3F3D6FE6CF48
-:10BE30008777F955ACA7295A249E1704AAB0DDB418
-:10BE400098EF678C38C2EB6D063EC89F972D6BDE6E
-:10BE50008FDF093685F8FB2F9D6EA5EFA5C2ADE2F9
-:10BE6000FDCAF62A6C37B5F1F74FE2BED4B55827B4
-:10BE7000176EC1FB835717F87858CAFDDA9B049FE9
-:10BE8000EE5476EDA7F7DAF97BF30E5913E977084C
-:10BE900085DF7AA358E74D9BF83A333EBE857E97FF
-:10BEA000744E4F88FCA74F4DF5F4BB37FDC59F95E9
-:10BEB0004A7B2E5E6F467D8287795981AF0BF9BE32
-:10BEC000E5569862C400EE0FCAFD3EAC3FD0D71BCA
-:10BED0008C18C0EDBEECE74AE3DFB5B1C793295F2C
-:10BEE0002CF723231B98827A19D728FC80B8FB9360
-:10BEF000371735D3BEE4CD03E4BE64B786E7B29707
-:10BF00005DFAEB847879963162DE53A29E42DEAF11
-:10BF10000D17D0EF8CED4426A1EFF29FFA3DB5C589
-:10BF200039E34C7C07B7B380B76F19B0E5276D10C4
-:10BF3000BCCF33356B782E1BCB57E83BC07FED620F
-:10BF40009114475FF86FD658C4C2BFE323F8E7B631
-:10BF500058B6F2EF31B95E9A2ED5CE984124A7B7E4
-:10BF60000B3ACD1820ECD330360CF5CD7441B73BED
-:10BF7000ACE0B7925E6B37C7C8FF7706A0FC3FD630
-:10BF8000AFFF6C7C1EA31F6AC5BC7385DF3C1F7F9F
-:10BF9000CF54C5F3E2B9FF7CEA31EE37DFCF3A2860
-:10BFA0001F79FE71EE2F36C0F2905FFAFCDED77675
-:10BFB00063BBA123F6776643347E9FDF712DE5795D
-:10BFC000DDF38F3554607EAF76E3DB943FAE95FAB8
-:10BFD000226CD417E060707DB1E16ACAEB98ACFCCA
-:10BFE00077368781BEC0BA9461586F0AE30F15E7B0
-:10BFF00000ACC057C4F7FF03486F4CA47A541A4FE3
-:10C00000A57DE0B7FDDE287DA4DD88D51765325F0C
-:10C0100033308DF259527F94093F854D8C8D1FD757
-:10C02000921C0E13AD8D92BE220E927E07BC4F7EE7
-:10C030004797C91E3699F47E4698E4B2DC0AF68228
-:10C0400044C96765E23C81183A6FC2755D268E323D
-:10C050003E8FE10319C754083EB893F9293E7A513F
-:10C06000F0C1BBEFF1DF839B6E5F447CF8DEFBDC4D
-:10C07000EF9471D4B78F9F22FF50FCD44B771BF8FD
-:10C080009349F8BB169306ADC3FDF44E1BFFFD6B41
-:10C0900085D3D975E7917C7D7EF15DFC1D17DDEFC1
-:10C0A00043B44C4AB0E23E628B99C717D3267F5007
-:10C0B000314BA73F86A45746105FAD4AD7F7FE84A1
-:10C0C000F1C69BE23CD6BD9944F70B5DFCFE854D65
-:10C0D000D7F84270FB73B338DF4A699E8B25541240
-:10C0E0008EB9E2775FE6A9E157BB713F5609BF58A9
-:10C0F000AFD0EFB4FC0EE5B2CE14B1F0BC5E17E5E4
-:10C10000E9E5F8FDE72943145F5B5EE7F6B14749CF
-:10C11000F4F13C6FC8F0FB3FBFF3F27C943F2FF08B
-:10C120003ECE23ED5F6C7DC2B10537D377AE7F6322
-:10C13000FE14DC175534FE7BCFB1F3623DC2725D55
-:10C140009EFA982DFEFEC129A16F4B105730EF4388
-:10C1500039FED338FF2911179E12FB63A71C7CBF41
-:10C16000EC6F03781EBCC4CBDF4B14D753623FED9A
-:10C17000549A319E94FDECE27A628935B05C47575F
-:10C18000EF868466CC4B641689FA93458CC74F7B47
-:10C19000520DE72E64792B4BBCB8CF5124CE2DD84D
-:10C1A000C3ED32EE63E33EF313D941133EFF3FFD8F
-:10C1B0002524DF00800000001F8B08000000000025
-:10C1C000000BD57D09785445D668DDBEBD857487E2
-:10C1D000CE06618B9D7D0F9D0DC3269D8428B86082
-:10C1E0002780A06C0D0804C8C6E27CCCE8BC3406ED
-:10C1F00011F95CE2382AFE2E7F83E0EF366384A0DB
-:10C200005103D32A8330EAD820286A465B46013599
-:10C21000242D2E836F783FAFCEA9AA74DFDBDD6CAF
-:10C22000BFFABD47FCACD4ADBA75EB9C3A7BD5A93F
-:10C23000345A897D7B3E21C4EAD34F2D20A44F225E
-:10C2400033DB4DB4D4D1923EEF8B6265B65522A458
-:10C250008C90C1D69A6C6B227DBEC2A7277250BD4E
-:10C2600086D6D3A0EEC8B6D27E7DD3453BAFDFC322
-:10C27000EAF49F860C226401FC66A5A5D1E4910B2B
-:10C28000E9EF1B743DBE6C6C276753099164E22291
-:10C2900071B4924DAC0E333C1D673996478B28DA4A
-:10C2A0004EC769D29B364823B1BBC348C79BC3C79F
-:10C2B00023C3CD5A187F361B8ACCE9DAFF93144387
-:10C2C000C85C23593F8CB6CFEB1AACA7332075312D
-:10C2D000AE4C0BC04D265A8ED1EF4AAE68F96C3485
-:10C2E0001D1BFE4D082D09D19263627E08878B10BD
-:10C2F000807B8417E1DA58E14FFE8F5242FCBB0C81
-:10C30000962DF43B0D5D6F1D91285C0D02BE0E2530
-:10C310007C651C9F8418DD5F1809B99E4864201D48
-:10C32000A7D3E42C037C36187D384F3AA2DE41D7E0
-:10C33000C575E7B858847F307D9FCEE7A5163BF9D9
-:10C34000A72E80CF9516067FB55C5FA54F20E4D45D
-:10C35000CDC462A08F56EE5FD86AA4F59577110B15
-:10C36000FBBA5D4346D1F139BE22CD2FD1A1215672
-:10C3700023AFC367670E20D6EC407D88334E51A7AC
-:10C38000E31298C7723EEEB0BAA18AF74734A72AE3
-:10C39000FA5FB62657D19EE22A56D4D3368C51F492
-:10C3A000CF68AB54D4B3365DADE85F44D206120A11
-:10C3B00067D33E99B8296A73DCB58AF6BCA76F5279
-:10C3C000BC7F9C343F348EF6EB888A2924948E5AA5
-:10C3D000A362B640495C766F3EC5CFCD1C8E82F617
-:10C3E000058A71BE89B9721FACEBCDDEC5D7124A82
-:10C3F00057233B9729C65D2ED7B3756BD31DF5D157
-:10C40000F79AE90FE0B398F8F70EA3F4D1E8966C29
-:10C410001EDABC64136B17EF2DEDDC8CEF2D752B42
-:10C420009F2F7F5A59775592EC66CA9FBFB59A13D2
-:10C43000901E8692A16783F82A4007B413FDDEA9F7
-:10C44000C764B72105F093F5F038C48F8EB8ADA15D
-:10C45000EB758A109B07FA3F6FB6B9687DC9FE85F8
-:10C46000381F4392920EA2AC4A3A88CE56D281D956
-:10C47000A65CF781E5CA7557E337D69E7B4EFCC6AE
-:10C480004F52D285C06B39FDF939F1FA24E0333AC5
-:10C4900080CF923DF65613E2894C338E02FCB1F9FF
-:10C4A0001A884306394712A89CA1CF6D6C0872D236
-:10C4B00062726928FDECB04ADA63C6C038455ACFCB
-:10C4C000EB00CF7AC945E0BD28E24E0279D15AEEA1
-:10C4D00049F6D075293636C3CA912F4D8E97414EF5
-:10C4E000D6EB3D85D02EC6FBD2E4C4E73DD23B8BD4
-:10C4F000098597683D85280F8D04BF2FF0386A00A5
-:10C50000A3E3E5C48172F8254ECF5F7C5487785C45
-:10C510004C9AF7DAE9F7BEF998E177297161BF45DE
-:10C520006D4A3C84E04F85374A3656F86E13877B58
-:10C5300019216E4D5A283EA52EC9632E0434740964
-:10C54000B9ED3C5BC2C80EF03986F4FF43F92DF01B
-:10C550004B3B48C1F209BE671914F89EC0A7905B17
-:10C56000E23B06D22C27011FA8E418C956AE1301DE
-:10C5700021310AFFC37FAF52196A8CE31F1B04E30A
-:10C58000C0E409B99C7F872C7026019E8CA40DD72E
-:10C590006FA364DB20D3EFC897A5B4128ACF128BA8
-:10C5A0005D86F52A23DE59F0BCDCD8DEAAA5435D02
-:10C5B00046CE58909E063FD570363E008724E072E6
-:10C5C00049444BEBE3797DAA4BF23D9A02F0BCF56E
-:10C5D000137C773C2FA74249D78F82F9CF4FE8CB06
-:10C5E000E324EB08F85EEDAB59894037EBA566A272
-:10C5F0009ADF91D7E838B2C61F0FFDAA8953CBF452
-:10C60000AE1BF5CD5B920FE77D03B1DF01A5D06FC7
-:10C610008DA4FDCA59B4DED841F5560C94511E992B
-:10C6200096A453854FA23D0A750D8504E87B39D445
-:10C63000C5BAA704DAB12E87D6D7521886C49D5F33
-:10C64000BF3F9C62E1FAD19FC9DA997CABE3F8AABB
-:10C65000137ACBAD9C5F37FC328490BFEA294E8AB7
-:10C66000818F8C2ECD40425253385F169242189FD4
-:10C67000F255660A1D7F501CE5432998EF587FD17B
-:10C680001EC2772AF849335DDCD114DFE652BD9330
-:10C690008ADC85C1F05E003E841DB10CFA02BC2923
-:10C6A00056AC370CE8FEC00ECDA5DE64D0FF629D0F
-:10C6B0009AF4C409F618694FC4EF8AE757A7683897
-:10C6C000BE283D5E009E22AF433ADA43621D2ED45F
-:10C6D0001E1A1BCFE62FF0E708C5F734053E09C543
-:10C6E000678102DFD3C2E29BE3E36499F72958270D
-:10C6F000D97C6810E0797692E346E83FE288EF98CB
-:10C70000A409CCAB5AEE79EA51D0639DB20D78B949
-:10C71000713C93738DAFC8C8FABD5D06B744C7A915
-:10C72000EB7C13EDB39E162A487591F1D40FAF0A36
-:10C73000DFA1F860EB28E059A1827FEE81EFCC7396
-:10C74000AC08E72DE7C1C32DE1F0F0CD6FC83C4741
-:10C750003EC0973FD0971FF86E315FF7DFC7386E46
-:10C760004DA1DF2F7D7F780CE0A75AEEDA3B14F065
-:10C77000B05AB219E8772718882B8AAEF39035554E
-:10C78000E49F74ADCA7DCD360BC547D270934DA6DC
-:10C79000F8C8BA4576B8E9B8FF58BD2A6E212DBF52
-:10C7A0006EA19FCEA0CF258D03E98D6CFFF4777429
-:10C7B000BC2CF36CDB465A9B63A0F3A1DF49F94D17
-:10C7C000B4278DCA89BFE88911F84D97DA7C703299
-:10C7D0001DD71F2BDBC00E4E90C944A02F81E784CC
-:10C7E000680687785EF1F856C9670A3C9FD0EA2F41
-:10C7F0005949CB19B0EE6501382754F94BC0EE11F9
-:10C80000784E4863FD89D69F5C1BC41F65800FDA94
-:10C81000DE0D761DC56763A27E3DE8C15E23AB13C6
-:10C820007B36DABFAB8D8C3FBAA392DDA01FBB294C
-:10C83000AC5E1CCF6326A620B918651F7839859B8E
-:10C840001C90C9365A7C6FB10F8C457C58D838DCA7
-:10C85000DEEA256412E069F5E4CAC171B44C6C6586
-:10C86000F851D3C9AB29CCEEAF3F4D19AF24F0BC82
-:10C870005EEBD15B4CF05CAF787E94E2CD6508D482
-:10C88000179C48BF92A09CB1AD87FE0B374413574D
-:10C89000907DD5C1E711092F8DB15AA2A5F86894F2
-:10C8A00088E35CFD5EFB6F19F1AB9EFFE7BC3DB119
-:10C8B0002A3C7C47003EDA5E75E7B50F83FDD9E878
-:10C8C000D511037DB4FA958AC124CC78FD783E3D1C
-:10C8D00096B8E383EA5A1FE2A3F1F415F8BCEACE56
-:10C8E0001E3DD03D8C63A5CF5747D907DBCE81E7EE
-:10C8F000323E8FC6D3B1C4151FFC9CC993C0F80942
-:10C90000D8FE2C2090D2ADAB53766FA3AF3EBB4F79
-:10C9100033694B98F9EA5319FCB9895AE4973C0FEB
-:10C92000B16F0EF37DD16F501C95D72686E79A82A2
-:10C93000D0F97554FAE6C2FC2F9F48ECE1BE779A15
-:10C94000D38B9877479C6F31A7FBCC1A7350DDA22D
-:10C950005CC7442E173AAEF625C3F8BD93991F1F46
-:10C960008A2736CF51DA6609F05191E42C02395208
-:10C970003F8356289D0C9EEDD138F3037C1769DD6B
-:10C9800003F8A6FE57C9B9F0ADC77631DE570739AF
-:10C990005F12BB49A2FC349FEBADF95B975F4B651F
-:10C9A00067BF1FF3D526EAC7D04F7C459ADF3443D3
-:10C9B000BD4D423F658193903554EE2CDE56B21E3C
-:10C9C000D4C5FC2442AE8863CF6F83729D2EA06FC6
-:10C9D000F1FF7612AC1FC5F76FBE5B69BFD691BB86
-:10C9E000BF05FBE7AB834C3E508D867EF8E23F2AC5
-:10C9F000C7ABDB7ACD7198679DCA0ECA02438FDA46
-:10CA00002185A9DC4F1B4546811E58B9ED3B7D8C25
-:10CA100035321F7C4DF93D3D03E4A505CB8A547B9F
-:10CA2000592AC4190EB0793A529DA353219E72809F
-:10CA3000CDEB54FD29A6271E4B40FD6400614E7FBF
-:10CA400035CC32BA5BE93CEEA4E2248AE2C76060EE
-:10CA5000F690B0036579951C43DB477FB93A0ED653
-:10CA600037E1B9AB26C17889CF45DB019E8D15F63C
-:10CA700022881B6CAC31D95AE99046FA3EE80FF790
-:10CA8000B3A3DF180A5642FBFD95C380ECBA5EF7EC
-:10CA9000405C6583E6DBBDC368FF0D57105B2B0967
-:10CAA0007CA7A9ABE645984FF234A66736A6D88B8B
-:10CAB0002C41E3126ED73572DCF5EDCABA6F2C5DEE
-:10CAC000DF47F7A1594DE14B1D08722397B075263A
-:10CAD00067289E289DC0B783EDD71EAAAF4856A0F1
-:10CAE0009EDB2E7974149E868E1735A00FEB6FF7A0
-:10CAF0000C9A057AE919AD6D4BD0FC12FE32A4D226
-:10CB00001A13D047B3240BDA0BC23EBF91887FF9CA
-:10CB100048373339DDDCC8EDF259D10CBF0B882D15
-:10CB200019DEBBC948623494A56655B597A1BE5AB3
-:10CB3000AE8B053B096009B7DEA28C145F6A7CCA24
-:10CB4000EC92E8BAF74AFE4C18E46B88F9B03893D7
-:10CB50007B4B4AE838EB5399BC68CCE476623AB137
-:10CB60009B29DC8DBBB3366FA44D8601741D8B51A0
-:10CB70002E19CB8BD14E3682FFB3F4B5288F141308
-:10CB8000C00BB1D88B34102FA81D5EBC116CD32301
-:10CB900054BE5006EBD5F992918FA9DC91A8EEFB1B
-:10CBA000CF2D936BB494EE1A87523B8CD6DF4D9DFC
-:10CBB000C1EAA9BEC51A5AFF614B33ABE7FA8E41F1
-:10CBC000FDEC965B6BB4942F1A8B7D8B655A1FFA24
-:10CBD000E45DAC1D1C424A58594FB6D5B8E8F85F21
-:10CBE000C772FD6EF3CD05FA697C354BB33108DEB3
-:10CBF000F83426B7BE8E62FDBE4E21F36A01DFD93E
-:10CC0000BE4C98A7E8F7AF546117B76129E014EF5D
-:10CC100091A4F0E3FF99BFB7B48ADB25D16403E0A8
-:10CC20008D2E932B86E27F4F57D616E8FF406A1C65
-:10CC3000C7171DA734308EC0A3184F7C7719E85D45
-:10CC400090C73A166715EDAFA532F949BFB30EBFCD
-:10CC500093CFF0DF583BBC08D68DAE9796AF979632
-:10CC6000F9AB9BB13F8C1B5B88F2BF444BFBEF39A8
-:10CC700043FBA704E6ADA68F7D9C3E96B652418845
-:10CC8000765A1AD2D18468661F9252251C43399E67
-:10CC9000E3D362199CFDEB3158C2EFB4723C0EA78E
-:10CCA000782FB878B83FE6F3F9B9E10E5A2FBB0CEC
-:10CCB000ED9D395B82E121E47EC5385FAF55BD57FC
-:10CCC0004E1910E6119786EFDD19458CF89C6CE93A
-:10CCD0007F2FA590D9A560AF3670BB9AB8AEC0E0E3
-:10CCE000423D971A0D1BBC7A2BB4B74B7637D067F1
-:10CCF0003A850FF05B7B6D2987CFC2E1B330F8DC5A
-:10CD00000A3A2587FCC9D3CCA1F4DB8FF7FEF1F2F8
-:10CD10008BF9780ABE0E371EF047A4F530A5FDCC7E
-:10CD2000EB21E6A9C2673F9E55F313F8047EC6F7D0
-:10CD3000F295F4D84FCFA9621D557C9D7289DFAB67
-:10CD400060EF35FC96AE23D82756253D3774A4688E
-:10CD500016E407DEEB84B52C0BC4E946A6717F6FA1
-:10CD600038190EF2DB55C9E2A9AEED065BAB15E34F
-:10CD70007B2569E1E37BF85CEDEFF5C5EA89847614
-:10CD80009132DED09768F3DAC14E3D496CDBE8B8EA
-:10CD900063557607ECDB6C3705DE0BE81365DDC504
-:10CDA000F920347EE44F86F9951A2A77586D845C11
-:10CDB000F7E453289F4B0756AE4AA1F5DA279F6642
-:10CDC000F56195DF418866DA93CFA03C2FCDABFCAF
-:10CDD0002E15EA69CFB2F609F61D32EE383C5B3308
-:10CDE0007148C07E989E6665F6479586001D19E4D9
-:10CDF0001536D093029F91CA5283A6399CFD3AB74B
-:10CE00009F9FD9BE4639D7CFE5C29FF76915FE7CF3
-:10CE10005F8CD1250F847D2EAA4F29BC4BD39C0B50
-:10CE200001FF4DD13D73C114BE3DFA533DD843922D
-:10CE30009DDA1B101FB15AC86C3A4FA967A303EDC6
-:10CE4000C06536A316F1C9E35514B6B3749CD77602
-:10CE50003F73EB30F61907CC6334E7FFA6DD3FFDE7
-:10CE6000F809E8D1AF4D3608078EEE7A6415D85729
-:10CE7000A3BBDEFE89E95B13EE5789798F86B82361
-:10CE80007D5EDE69C0F98FEECA5904FDC7BEDF952D
-:10CE900006F431BEDBD30AE2A06FD7CBC39CC1FB43
-:10CEA00057E4B87436EFE2ED8B7E7C7CA927605F97
-:10CEB000527CDC919608F838B318E28BBD8907D70D
-:10CEC000FBD04E1BCEE299FC7D6A9767039F9F22A1
-:10CED000036CB0BFD06766E3A8E39C476A287CF484
-:10CEE000F9783F9D4190DD3CE1B4910A9040BD82CC
-:10CEF000C42AEA55C6218AFED5961445FB55493900
-:10CF00008AF6C9D62245FD9AECD18AFED7D92A14D1
-:10CF1000F5EBCB272BFAD7D86B14F5224FBBA27FAA
-:10CF2000C9BE4E65FB212BAE4349B7A30AEC799BE2
-:10CF3000D7D90AE5E53D6D5503AD2424BE5BEA7300
-:10CF4000B7C2F3B1679ACB3C2434CE4B9639715FAC
-:10CF5000C000EB2207ED135478911F7B35366B70C0
-:10CF60003C77F620E7ABB04E6F4914ED14D9571853
-:10CF7000FDF1B05ED5F3EE9163605DFC04E35F1DEF
-:10CF80007ADFBD6341CFCF91D1EEEDD012B41F3B1C
-:10CF90006616B821067844F2BDF409C8A939D1282B
-:10CFA0004FC6530B17E186BD5009D6C9A980BB8275
-:10CFB0002C55ADD30A45BDDAF25B45FFAB92D62ABC
-:10CFC000DA275BEF52ADD3FD8AFA75B64754EBB45E
-:10CFD00059B54ECF28DAC77FE16B05369AD0E39278
-:10CFE000CD74FE638EB455C1BA8CED76CD017E2929
-:10CFF000F5385B5184EC697E134A0FF5AB20AEF532
-:10D00000464B12967B5AAC1897DADB928DE5BE162A
-:10D010001B3EFF5B4B3996EFB4D8B1FC7BCB242C85
-:10D02000BD2D0E2CDB5BDAB1FFF6964E2C290647A0
-:10D0300080BE4888E7FA87D6C1DFEFD5F81A61E7E6
-:10D04000D59FF6BF514EF60EF0F542FD76D76994A6
-:10D050008B9FA413946FF119ACFC29DDBE2ABD8C03
-:10D06000C914E44F9D6903E881768DBD08EC6B6DB2
-:10D07000BAE60FDA1184DCB1D6916489657523AD07
-:10D08000E362836346347FB00F27E44FA03270938E
-:10D0900045530BF5BE28D67E364D53EB42FDC0F608
-:10D0A0009DA705F69DB5E961F69DFF74C26A867875
-:10D0B000CBC133596680EB208F2FD949916E3E2D1D
-:10D0C0002BB4453AD08B47547684283F335598018A
-:10D0D0009E768D6D3AD829AEAB75641B9517B51247
-:10D0E000F347FBEDC074666FF75D67407FE790C65E
-:10D0F000BE08E89CCAE927005F195BE36A41AFF408
-:10D1000099FDC98087B4ADB1AC9EE87F42B205D528
-:10D11000750CCEE15B2DB5AEFCB070A6C07CD470B2
-:10D1200066A6F3FD068F7D04E85F513F54636F00F0
-:10D130003D71A8C29E01F339E83020FFB81C667724
-:10D14000060839ADBD6C7A50DCC59DAEC3F7A6E9C3
-:10D15000199F919B64F7B6307EDAEE7466EFE3BAFE
-:10D16000813F776334DAE18734A46E7B183C7EC05C
-:10D17000F1F3CD80F0F1970FD3991EAC9C6AC6F104
-:10D18000FA5647E1BE6F9F230BEDA0BE668A25CA03
-:10D190001F7D279A4FEEC47683D812C3FDCD595C0C
-:10D1A0004EFDA96BD50F8769FF4F5747DB50865B54
-:10D1B00072513FDDC43BCF8937A2DD32A7764425CB
-:10D1C000E8A5597C9F6CAE593B08B7CBB4B17A0B3C
-:10D1D0001DE76653D17A50FF8B136AF4B1B45E3702
-:10D1E0007CC57A2897A5DFAF8FA3657DFE8BEBC149
-:10D1F0007C6CA0AC5586FE92EFDD163AAF796B647D
-:10D200002BF39FB85EB32FBFA87319820E018F4016
-:10D21000A714BFE8171EE1F816EF1DE1F85A9CCEDF
-:10D22000EDB602527056B9FFB30CF8A167CEBB99A8
-:10D2300011E2F4CA766EB77DA067DF5DFEB4CE1D45
-:10D240001C4F12DFFD289DD9D787F4C42E811D778E
-:10D250009319E9A370E677B79751F80BBB2C1ADC4A
-:10D26000BF1772DC4B307E5FF68513E5DCE53DBE13
-:10D27000A70E13A4F34EE093F3E9A9A9AEB5A81F36
-:10D28000467F4FF50FC8C533CE4F0FA31CACE372DA
-:10D29000B019E5D79E963558DFDBE2C2725FCB0648
-:10D2A0002E07DBB0FD9D964D5C0EBAB91C7C1A9F13
-:10D2B00077B5CCC472778B93CB41B6BF5ACBE969B3
-:10D2C0007692F33EC093D8C79C6674EA005F7F7D78
-:10D2D000C44064D89FE832209D520E78E2D10438D1
-:10D2E0003763B06CB4869E9F51CBDBFEF557EDF7EC
-:10D2F000AE4EB23F0AFCDD7F5E06ECB3CB22D3CF4D
-:10D30000416235833CD9917E432DC8E78356AB19E2
-:10D31000ECD68EADBC6EB79A75B4BE337D06CA9797
-:10D32000834EABD940EB2F6D9DC1DA5D567314ADC2
-:10D33000BF9C3E93D5DD0437B7BBD2E7A09CAD20A0
-:10D34000D21EE0872A63CA442AAEA97EACD8037CE9
-:10D350007055D2FC89C00779E956A4C3C9D6B57BFC
-:10D36000A07E4DF6666DBC15A2A145EBE0BDCA845A
-:10D370001A2DBC3771F88A75F0DE95E9F76B83DFFB
-:10D380009B94FFE23AA85F6BDBAC057B300FE45661
-:10D3900062601C5117ED42BE8AF35D23BB1C28C797
-:10D3A0000B3B1D28C7055E2AA7D5DC0171BAA64E26
-:10D3B000C922C13CA649FD9BF612B5211ACF506E79
-:10D3C000A172F6EDF4BAB8B514CE26A88FC1FA1F33
-:10D3D000D68697BBDE70FAE543CEA7A0376BE83858
-:10D3E0001F52FE81F368360E5F53D77CF37CD4570F
-:10D3F0004E33E8D7515C5F8EE1E5325E36F1F233B1
-:10D4000093FD63F8CEE791F9FA4BA00FCAB78BD919
-:10D410003C42F85AD9CEF9FA38C72329F52743BD3B
-:10D4200081B4619CF07CE7BC9606FB6F29705EA21C
-:10D430001DCF61A8CF4BD4132F1BAF5D75DE82F8D3
-:10D44000F4B80FDA19F41CE511F73F0630B93713B9
-:10D450008435381D1914EEECB0706B3312CF09B758
-:10D46000B29DC3BD94B8F17C9B1A0EE24C44DE5AC7
-:10D470006E3A84EB190A8F2F3C3C217030FF5D9C83
-:10D48000671171796A07256494811C341388DF045D
-:10D49000CB89C3E790136A79F473C9B973C89B1C2D
-:10D4A000C09B5ADE88735AEA52D873B4EE82737AFC
-:10D4B000AEDD5118A73F697596C2387D95FE1F35C0
-:10D4C000E09F25F890CE7E3FCC7939E041D2B3FD84
-:10D4D0007AFA4626ACDB098DEBCF601755656C41B7
-:10D4E000B9D30BCA81F2E3585A07BBE7F1A18EF119
-:10D4F000F01EC966F413E95CE7C40CA68F424BA288
-:10D5000038DFD8B7F9A7648C639D87DE23E1A15A81
-:10D510001EE77381BC2F8F4693A747221E89DA7FAF
-:10D520003D1583D08EE819A1D742F973FB893D23BD
-:10D5300032717CB5BFD833A4DCC8BE7BE524283B60
-:10D54000F5CE4DF3C14F1A6D403FE93D7E2E704A36
-:10D55000343B47F51EEC13D37E538E9E4900FDA548
-:10D56000F6377BF6CFAEB41686FA9D14CE890067E7
-:10D57000FDE79A3BE0D9C5FAA1F56B7E24DA78BACB
-:10D58000AE6BCE106DC985F8A5440671517CC4F60A
-:10D590002694655F78E30AADE07F0AFB81FBA7E78D
-:10D5A000398F54EE67F6C28433245B5B0A71A6019F
-:10D5B000B87F2395BFCDFC565E8A7D91716C0A645D
-:10D5C000AEC6E4D6A72ACE23256969395BF68D82DB
-:10D5D0007A2FF1E23E89DA9F7D8BC7A1A85FFB20FD
-:10D5E000D0ED7A7E4E89AE483CD06FF5EF3E9A7B07
-:10D5F0002BCA8128B487FAFDDA9D1A3C67D0A1B501
-:10D600000F1C0F7EED9A0CDB5A5AFFCC9BF8E06B97
-:10D61000B46CB2FC887813FC5BBFE63BC4A7A8F7E8
-:10D62000F0B86F9B8EEA1F5AD6FFB78C7AA89E90EF
-:10D630000DB86EE40DFDCA20BD48DABFEDC7FF4846
-:10D640002AF76A0081A8172BA7DA69BF1AEE7F10A4
-:10D65000F226AB73BF8BB852A7DAE9B83589BCBFE5
-:10D66000EB21561F21DA1F66FD33C478FFAAC5FAE5
-:10D670001051E7E3E588FA7BAC9E22BEE767F5022E
-:10D680005137B3F1CDACFFEE6D3BA6823D22E4FDF8
-:10D690009E0CAE1F8B48113F9FB30FE57FE47329AB
-:10D6A000CA76AE1FE63D23BBF423617D2647BF0B40
-:10D6B000FCDD2EE119BAFADB7418EFFE26AEBD7060
-:10D6C0005590BF22CEB138AACC76B0FF1A5ECADA26
-:10D6D00022F3733D607F10BE1F5D2D9B707FE2D4EF
-:10D6E000DD4CEE47B2DF16AF794DB19E21EDB2C4ED
-:10D6F000FC71D8B8A3DF3B79CFE0CDE85FA47B71A4
-:10D70000FFFC588624F6E949795CE0DC58421AB1FE
-:10D7100083BF9AF03295CFB0C65F78511E2F7E99A5
-:10D72000C57F1B1E7913F5DE02D98AF1DCEBF29D71
-:10D730003D809F5EB317E38A8BD7ECC679FD9F1CB3
-:10D740006E3758FCF9C1F8FC3E14FFA7CF83FFD316
-:10D75000BF26FED571E765A63D08EFB28B3CDFD64C
-:10D760006B66FBA236BE4E4735D6511C5F719910D1
-:10D770003F5FE4CD8C95E1F0B177103BB7F44E19E3
-:10D78000F845A79ACD04D67DF6AA7F143AC3C47D86
-:10D79000D5FEC0CDF0CDC400BEAC9921F84DCF2C44
-:10D7A0003B277E95EDBF307E076B7D7A1BECA31E79
-:10D7B0002138CE28EF517DF0F99889994C0F0FEC64
-:10D7C00064FB46EA735F1333CDCC6EE2FB330DB5D9
-:10D7D000EF8C83FD19C10F13A2493BC4DB295DDB2C
-:10D7E000385DDB80AE05FD06F669E87B61F82B400D
-:10D7F000BF4471AEEF9A4C6E5F06F07A7DE6B9E9F0
-:10D8000056D9FE0BE3B583DAC3B8AFB9330AE329BF
-:10D810006A3CAFE47815F86ECD64FC1F09CFAD808B
-:10D82000E7C49F1FCFAD9956453C42E03B927E52E4
-:10D83000AF8F9877183E2DBB143ED5677339A5F589
-:10D84000E17953F5BA6F0CE5A77BCFC34FF7FE9A8A
-:10D85000FCA4C69BBAACE7FB9DEAE7CF678AF3015D
-:10D86000BF0C1EFF7F8BA7CF697E5DD13E6FCD7E43
-:10D8700045FB7CD701457D9CCF5B05642EE2E357D9
-:10D880009CF0BF09F54B8DB3478AAF4FD9B1440324
-:10D89000FB6FE55E16DF6FC8764A5974DDDED3B8DC
-:10D8A0005BCD14AF9777B7CBB81FE62EC27DC055BE
-:10D8B0007C8EDF8DFBD7A7B752BAF98E1830FEE900
-:10D8C000793D476B2D08A5838AD332B107D98915D5
-:10D8D000C6582DD85315D4520E4737FA2C467778B0
-:10D8E0001E88F2FB4C23D125503E9F3953C2F34F83
-:10D8F00033093B574D4B8F93B64FD1128F81D66B67
-:10D900004C5A8F01F7FD58DEC374364D62D01217A2
-:10D91000B4938478F483A7C1433A5FD92EE379B6F0
-:10D92000E9E56CBFF02653BB0EF4E98DFB6E3F7941
-:10D930002B6D27EB5C65ECDCB6C863FB587331FBE1
-:10D9400080FA2CC6E77D12DF5796743638E7AA7E38
-:10D95000EFE34C06EF1479AD0CE75FFC0708DADD66
-:10D9600082EF287CFB0CC52C4F630CC049749EAC25
-:10D9700018B09FEFAF82FEF587AC8897A6F2B58509
-:10D98000B08E4D13A5CF0D8501FFA669CDF768A711
-:10D9900057CBCFB742FF53475868FCF21E970CFE97
-:10D9A0004A207EE99B0B7C793E3F48CCBBBBC583BC
-:10D9B000F4F469CB3E2CDFBBE2ED32B0337C2DDEDC
-:10D9C000B0F1CB4B8D17883881881B0839F0D96DA1
-:10D9D0005583812E6D595C2E18A561201788969568
-:10D9E000425E8ECA0A91AF63B2CEAD5795EDBFB01D
-:10D9F0007CBD503AAF4F627A514DDF6ABA16F44C93
-:10DA00005F2B93E8776FA2F61EE8D559C455504FA7
-:10DA1000E5ECCC256DBAB1D2A5D3F532D317C92424
-:10DA20004CBECAC5CB732BC22F57C9E81F88F30A57
-:10DA3000621D1AB242ECA115E759B715BFE6BA85C7
-:10DA4000EAB52FE65E9A5E230A7BE0EE50B8DBCEA5
-:10DA50000377DBAF0A778A55E4D1CC953581BC11C9
-:10DA6000384F0C765C9F9BE545D6A5B4C5E0E1CC6C
-:10DA7000727F0CD88D4B77C94887446BD70EA1F4C1
-:10DA8000BA84D36B0FF17C00F4B864DC12CCA7AB82
-:10DA90007B2CFCB9E246DE7F99A9430F702EDBAAEE
-:10DAA000ECD7C8CF15D73FAF8C8B368EBBEA388CFE
-:10DAB000DBA83ACFF35216CF4B2C26C5ECDC85D22F
-:10DAC0003E5597BD2D4411AFEC3DD382F180DD5919
-:10DAD000FE075CC383FCFFD0F5DB97756E7B4ED9E8
-:10DAE000FE2BD3AD6CDE8AF955174BB76B73EDFF88
-:10DAF00080790B793C1B6413FDEEECD70C6E17ECB0
-:10DB00008F9659597C5372B7C27E5BDF4F04E3474F
-:10DB10000B789C33527EBA386F30FA90BB959D37A4
-:10DB2000B0CB902F3A6A9FA30AB62B4ADE69467B98
-:10DB300024E2BE95C8B3E2E7872E54AE89B8DEA8CA
-:10DB400013CD6867D9BC16B487C69C6E7F13F4E307
-:10DB5000CF15EF16FA706C3CC35BA9CF81765EAF30
-:10DB6000CE53F621D809AF4485B51362B3D9FA4D27
-:10DB700075CDD7B1BCC390FDC0D86CBA1E53B9FCEB
-:10DB8000D718ED3AC053B5DCF3E00CA01FAF8CF111
-:10DB9000BDD5BF7FFFCF8F5ACFEFF73759BE43BBFD
-:10DBA0002192FDDFA461F917C555563CE707FE1425
-:10DBB000C4F744BC4FDD7F426E651ACCAF5A1EE7F6
-:10DBC000B5C37C36B1F9445A9FA635DF2AE28B9162
-:10DBD000BEDFB4ABCCB220880F6ECE9684DF613945
-:10DBE000660CACEF85D2C178FF4C85FDF3FFBA5FC0
-:10DBF0003145A6A625D59F05929BD9AF84D9B1B34F
-:10DC00008917CBB9C48FA593B0F3F70B880DCB9BC5
-:10DC1000793EF3811CE74C58973E9D7F109E9F7C78
-:10DC2000E9DFF9403727AF18DB06DB5EBF941DD76D
-:10DC30005764C5EFF7EDFC77329C83399F5C589DA4
-:10DC4000645F9E1D66FFF9EF15F24C966FF518EABA
-:10DC5000891A7E1B0399C8F6D1484A0AD243402E3E
-:10DC60000EDE2CE422ECCF167CAE61E749964AEE3C
-:10DC70000CDAB5D3A741D62A5894E296A1DEC1DAD0
-:10DC80000B1A62DD12AD178C8E62ED2B62DD104730
-:10DC90009F437CC88FF3A82884723E61726F21B1C4
-:10DCA000B37C07E24F053B6C5197919DF727BE74FB
-:10DCB00090EF8511FC9FB7B299DF3C3295C9F39183
-:10DCC00095CA38C53D5C0EF4E6549EC8A6E5A96C1D
-:10DCD000FBBD80979171DE8D0F9462DC9E80FF709A
-:10DCE0007CF46F71BF51BC97985BF900F47B416283
-:10DCF000E7D35DBB0C783E82BE31C81174AEFF40E5
-:10DD00004ED523D0CFCDED928878257E45FE6C8010
-:10DD10009F5C38BF91E07361BC9C3E28C7EF62FDF9
-:10DD2000C5ECDA69EB4C18E37781DD9B98EB7C1648
-:10DD3000E7AF27C404F37FDCE0DE82F6697332C408
-:10DD40002B973C61D080DDF01155B79087F2498B5D
-:10DD500011CB7F503F18CACFA81F0CE5E7D40F8620
-:10DD6000F29FD40F8672D1E922AA2C283FE5D8DF92
-:10DD700064F41D3E4FAB4BE05B7C7F971EBFDF9B87
-:10DD8000E344FCF6AFF72BC40D9B3A2FC4FA87C6C9
-:10DD90009D83DE22CB198617B15FA86EDFCED7B583
-:10DDA000B0438BFABDB0D317B338A8DF816C3DCE3A
-:10DDB000B360E7179887DA6BE9C7AF5DA2204FD150
-:10DDC000B0FA81EC3AC46F6F8EFD04C04DF9FB30A0
-:10DDD00094859DEFFF01F27FE8F878EEA04FF23FC7
-:10DDE000847E800A0E351E045C2FC47A37C2FB2F56
-:10DDF000EC4C0548A8BC218C6F808EA470F0AEC599
-:10DE0000F95E6FF097425ECBF567E5B0E78C7B7308
-:10DE10002A10CFEB04BD093CF1F5BA54BEEEDFFF8A
-:10DE2000E6744AC43D1E203BADA087CEC480BD57DA
-:10DE3000C3F7F73B3BD2DF03F85CFB64926145FA22
-:10DE400055F0DDB01C4627A22CD8A577C03ABDB04E
-:10DE5000EB58FACD265C97F445B47F744E8622FECB
-:10DE60005830FAA7FF782001FB5BE0533792CDD5FD
-:10DE700070FE6496F1F5BF0248732C9F57C3F99367
-:10DE80007949D25E28E75B53AE847327E27CFCC2FB
-:10DE9000EC8ABDC04AD7DA6AD04EAB00E112A40FBB
-:10DEA000AA8CD1B029D85FAFB6C42BEA57250D5341
-:10DEB000F49F6C4D53B45F939DA76817DFBDD65692
-:10DEC000A2E83732CE9F0AFE198503F9816C93F1DF
-:10DED0009C5EC1CE4357E7D1FA94A7A6DBC02C794C
-:10DEE00081B74FD95EE586F5E8A3F8D45303EA4439
-:10DEF000F95D0F3D0083A9ECFFFA5D4FEEB55B2F96
-:10DF0000C2FE8F60F70B39BBBCCB580672F642FDE0
-:10DF100000F5FA8CCE51FA0591E8A69F2F242BA389
-:10DF20009BFD32D916866E08B99DD3212BA71C64A0
-:10DF3000F963172BCFBE0479161FE08FFE52159799
-:10DF40001BA9B7BDB70AE2F4EFCA04F3F1785EDFAC
-:10DF500062F85D0ED03BB979F31D4312F0B90BECBA
-:10DF60005CC82FB5D3F157E470FBA9FEF53B86944E
-:10DF700006DAC9EACF15FDC96DD27A457D5D8AB250
-:10DF80007E77C5FAE0F723C9C5C59BE6EB9D98FFF0
-:10DF900029D9DD61E483984FF51B5178AEEF3A380B
-:10DFA000AF421F35961ED0C23EEC7511F4A8903FCB
-:10DFB00037CAA4395CFB6D392CCE7FED1B51780E2E
-:10DFC000E662C7FD88E212CF19BECCF4E84703BD74
-:10DFD000DAE075BF93CFFB64D9FDBFFF11F6475F51
-:10DFE0002178EEF3642C93FF851DC7351AD0830387
-:10DFF00018BD145A7C1AD02B7D75D12E38D7DFB4BA
-:10E00000D4CCF25F52FD1F18E9D2DF97F3CE1F8DFB
-:10E0100074DD3E8624C820BDDA074E11AD6F7AE666
-:10E02000ED69EBE8FBD7BC11E5D15C023C9BF8BE87
-:10E03000C4C84AC6E773816EB87E81187BD31DA41D
-:10E040005FDF805C00F8A1FE5ECE7B87FE0876F87D
-:10E050007EC6E770C24EEDDFCF0AF2EFC9638C2FA8
-:10E060008DF4879D5352F1F79E36BDE99C7CDE8E80
-:10E07000E76E2E94BF77E4F03CE1C8FC7CF01ABA5E
-:10E080003E4DAFB07B2D4E7565605E6C247DDEB479
-:10E0900049463EECD75F5DF22437EA29651EBAC0D7
-:10E0A0002BB1DB903FC5FD512BC7FFAB16F4E6CA81
-:10E0B0005D5A764824D27736C8C41AF49D17761B69
-:10E0C000EA30CF8DCFBF4FE8EB5D3FC455E4B3726C
-:10E0D0006D18BD47F5B42E01F4748D847EE5E15DC5
-:10E0E000832B014F8725E2B162DE163BA73C950DDD
-:10E0F00007CF4D786F4952369E4F16FEA5F02BA7DD
-:10E10000EF9A9E0176E5071D0B0ED39523C772D2B9
-:10E11000908F661017DAC187631D23202E31859FEB
-:10E120000F381CEBEF01B97C787CB404FBFD74FC68
-:10E130007530BE80EBB0CE3182DD3F21CE25E75E6B
-:10E14000D27D71D5F26D15D7C0FEF66C6201BFF2BB
-:10E150007A99D9B9E42F8C3F85DC6B92BC7130CFB2
-:10E160000339B5A773289E06AFB997C75539DEB4F2
-:10E17000EC1CE285DAB9FDFEECD312BB17C5C6EC88
-:10E18000FFC671DF3C3803F2E4A8DF2DD1F92CE89B
-:10E190007C1DEFFF51FBD9FDFECEFF309E1AEA2F0A
-:10E1A00039E27283E2E46ABFA9DF4E17F6DE367603
-:10E1B0004EFECDF10FF72EA7F5D5DBA2118F5F3DF7
-:10E1C0006170811CFF6A8B01FD9FAFE2FCDDABA09B
-:10E1D000BEBDC0E6C2AFD914F7A32DD1583F04FD90
-:10E1E00043FEA6C37B3D8E3F6EF0C0798FA54FE600
-:10E1F0006C017FEAF808EB73CF433CF0B944BC678D
-:10E200008038D9FBD7717E04FEB252D343FE2F3340
-:10E21000DA114B770C413926D6EFC4E3519847FF0A
-:10E22000D5BEA903215ED6A37911F378886C7281DB
-:10E230003C5EBE250AEDC035166729C05FF55FD785
-:10E24000CD2881EFBF9F48009EBEAE1D18AF0CAC1D
-:10E250006F78FD7EAA2B8DC9817E7DCBCEDDCE83EE
-:10E2600073B76978EE760C8CDF40C4FD8BECDC6D07
-:10E27000B12CD931EFE09EF079E4D7E432FBB15E06
-:10E28000C44FE2893109F8D04910DEBE7BB2B680B6
-:10E29000BFB330378E7FD7CFF32505BD7537BE8628
-:10E2A000F113033BEF17157E1F7B462ECB2B5E6CC5
-:10E2B000FC5E11BF695CF39322AED2984F50EF160B
-:10E2C000B75A4B56D07215C7F3EA54C74D00DFB2A8
-:10E2D000F6FB5F7A07F1F2D86F3E86EFEE3361DC32
-:10E2E00086BCC3F0A7F667161BBFE5FCB4596107EF
-:10E2F0001F7BE4433C6F726C675E21ACDB02D97B11
-:10E300000CEEE5EA357B3FBD9596DBF71DC47551F4
-:10E31000CF3764DF5E6272A51EE08887F32E8EE63B
-:10E320005CDC1766FC7E746301E24FC473FBBE0ABB
-:10E33000EF6F89798AF1C5FCC4F8A2DFFFE2EB75C3
-:10E3400052EF2D04FD9C06FB166581F69331DEC26B
-:10E3500058133C67792D27E3683D886E7EA9FD9DA3
-:10E360009B789CE78866ED2D7A4A7F3DED0FE89C0F
-:10E37000C172F422F775C47CC5B9529147FB9FB9AD
-:10E380003C9E3D828C88907FFB646E59D8FC5B7C00
-:10E390001E29FFB63FDFF607966F2BF26B4BAB34AF
-:10E3A000CDC179B6421E96E6D1E7F9B0EFAFD4EF12
-:10E3B000A52395FD23C9C7F1796C1D4BE3C3E7BBCA
-:10E3C0001EE2EBDC4A3CEC1E42AE17C772BC8BFB74
-:10E3D000BF849DD2C8E5B6C8F31CDBC5CE6D8EE503
-:10E3E000793B540A609E6BC83D6F4979A857C53D7B
-:10E3F0007D121D6B765CB87C612FCEE30AE2C7D23A
-:10E400004E2C5A2829FAB19C481C585E499AB19C56
-:10E4100044DAB0BC9AB463792DF16249723DFCBC18
-:10E42000E76D2CCF74F2120DE8D7D219E1EDE21F9F
-:10E43000CF8B0717DE2378B178B892B0FBFE42F09D
-:10E44000313C1BE95B8D0F75BEE678E2C38B4B2632
-:10E4500000E1A6811F6CC5F3AD55C48EF5EA0BC46F
-:10E4600043B9CFA965F9BD2A7C5485A78BB31C1F7E
-:10E470001B40779605D6A9348FC901B15ED4114BE4
-:10E4800002F9AF5E47F1BC34BAF23B2B1511C3F26F
-:10E49000EE988E79DC2595ABD268BDE0B907597D41
-:10E4A0006CE50EC8F31E99F7F074CCFB1E5959A207
-:10E4B000B3C17D729BA64FA4ED4E7E6EDAC9CF4BE1
-:10E4C000136791E29E2CE7DA5BF0DE31E708930DEB
-:10E4D000E01479E1721ADB5F4D9EE4794347FBED6E
-:10E4E000B23807E595C139734F8C15EC84B5D578F2
-:10E4F0007FD49D7AD65FDC6723E013F7DC6CDF9E68
-:10E50000B74A4A3DFF3CE8F8E97989309F0CCC8F47
-:10E5100073EE94783E5CE5E099546EF4787504F2FD
-:10E520000BC4F72CA9CE1C980F81A478CA17C3B8C6
-:10E530001EEED99E9707EB549AC7F30713524A0071
-:10E540008F0B521DA5D05FE44597C2BA24462E67B3
-:10E55000E7D98BA1BFFAB9C8CBAECE7396437B5334
-:10E56000F419CC37EB2D7A7FBD2F25344FBDD54E16
-:10E57000DC7A942BCAFCF4BE457ABCCFA9D4E16CFA
-:10E580008523CA97CFF68FC27CE13C67158EABF727
-:10E590002517D1F7FE3895E5BFABF3BD77EDDEAFBC
-:10E5A000C86F177CD69FDF7E8AE5B707F8EB9155D9
-:10E5B0002428BF5DF08DE0BB3190DF1E03F59C4544
-:10E5C000D06FFCFBDD98DF3EA1DBC7F3DB3F54E6F9
-:10E5D000B7DBFF7549F9EDC7F9BD6FC78DECBE24F8
-:10E5E000719FD4CA9D6CFF77A5C4EE935AF9277624
-:10E5F0009F94F00BEB387C0DFBB7AD877DBEBAC79F
-:10E6000016E27D5484DF876AA53FC17EA1B89F547E
-:10E610009D07D304FE20DACD1EB4BBD4F9304D8F54
-:10E6200055A13FD8A4B2A36FC9E3F11DAECF08B77F
-:10E63000FF96F077010E13FA677AB43B573EBECAD5
-:10E6400066813AE72BB2EF7912DC9F3C168FB4203B
-:10E65000F86CE90609ED5781BF914F19EC789FF1ED
-:10E660005383D16EA5F636CF6376337F9BD20A9C57
-:10E67000877F21D69F0A76F20BBBB26D54C29257A8
-:10E6800023DE43FDBCEA1EEA2715F7509F82FF8177
-:10E690009D7642E386714691ECFBC6D17AD909ADED
-:10E6A000CD6D0DDCCB7CBEFB8705FE0D7CBD2EF653
-:10E6B0003E62F5BDCF22FF417D2FF19DFC5EE2F170
-:10E6C00011EE2536C85D32DA0FDF6B15F7135FCE1A
-:10E6D000E12CB71237DCF73BA647AB58FF725F1B44
-:10E6E000017B28EA90561147305895F597F3787CCE
-:10E6F00080DF2F128A6F533F3E0D88CFF487119F22
-:10E70000AAFB9E059EFAEF7B1E6E42BA1FB37F875F
-:10E710000CF2E062EFFDFEB5EFF93EDFBDDEEAFB95
-:10E72000BAD5F77347BAEF5BAC7B9167A5A2BF7A06
-:10E73000DD4BF6FD4E791F355F6F17FDF939D7FBBD
-:10E7400007D57AFF1B2E40A37CF8F7981377035B5D
-:10E750004E896672ADDFAF1FA7433FEB3D6B7C95E3
-:10E7600019F89FEB2907D753E4B676DC8777707AE0
-:10E77000B179D93982E223ECFE8A521F3B4F30EA4D
-:10E7800044F8FCA0EBCB25C5FE6EE8FDC52CCF7888
-:10E79000EC19764E4FBDEF2FF2866AEC51CAFB1B87
-:10E7A00022E41189380EB5E3891EEC780DBBCF2E1B
-:10E7B000CC7DC79BE4B4E03C2227C677A619BDC92F
-:10E7C00040CFF129CECBF21303F9461320AF4842D4
-:10E7D0007F90E7E124DC0071C73E48B21D4AC8675C
-:10E7E00077C7DE80F70624108B6F1473777176F984
-:10E7F000CE6C18E7A864595F42DFFDFB986F924129
-:10E800003F19605FBB18F77D73A15D7D4FBF4F63FC
-:10E8100045FBC2F53B09FD876F60B0D141FCBA41B1
-:10E82000C7F31A557FC780FB53E2EF181CA543D4EA
-:10E8300051B93DA793E5512F4FEAE17E18BBC7754B
-:10E84000E17013DEFF44EC2536E6870BFF6A987C07
-:10E85000317AF37CE78B96277DA5F073C9F3F11726
-:10E86000B49F18809B8D7FF4AE68D43747EF1A8130
-:10E8700071BEC0F8BDE8F7CF69569E339EB7E62358
-:10E8800005FDCD777DAE68F725F875C328FCBE97EA
-:10E89000865C398BE2EFE44EC328E033BA6EF3F2C4
-:10E8A00083FC7BDF3D5913991D703E38BFC17974DD
-:10E8B000F373A202CE4F5B8E60DDD7E2539DE7710A
-:10E8C00029FC5251EADF20784F8E5F1A600B1767E0
-:10E8D000399ECFECF66E9E07D9CDF320BB79DE6270
-:10E8E00037CF53ECE6798A227FB45B2276384F31FA
-:10E8F0005B723C315FC2FCD1DB00CEA665FE42C834
-:10E90000B76B1AE99B2BC9983FDA925F16367FB432
-:10E9100010F2DE5F797EF60D60D79F18E0C27B496A
-:10E920005ECC9F7903D8F527F48C3F5E7FBEF2065C
-:10E93000C81B7B7CA8F32E18E74B49F6203DBF226D
-:10E94000E17E2AB1FBF4B5E7C82F6DCB67FB0BF76F
-:10E95000E7B37D0C513E97CFE4D9EBBCAC96EFCE3C
-:10E96000C4BC9F4D06CCFBA1DFB16B82F6FFD5F98D
-:10E9700059C57F3178406E8838CCD67CB6CF0A79BD
-:10E980005B30BF84FB0C2C6FCBE74D863C2F38EF00
-:10E9900003F7669043C4CEF2C0D8FD7D621DB6E693
-:10E9A000F3736770A17E69204FAC61FFD14F418E38
-:10E9B0005C97EF7C1AF99FE72F35C4BC8EE7265E83
-:10E9C000CDB7E27B74BE083F9507EB24C473481CA7
-:10E9D000AE3DBF2C34FF3D12FC2717791FCA4F09EB
-:10E9E000E44F05E54DBD0AF310708B7904C6393745
-:10E9F0005D8B785220DE756726F049B78ED97BE2B1
-:10EA0000BEDA62599A574BEB6F71BC88FE9FF2F5E4
-:10EA10005C9DEAD80FF358D6CCE26EA2BD4F6AFBDC
-:10EA2000CDC7B06EFB4D28EFD4DF17EFABE16DD84B
-:10EA3000BD1FF142E19D0B7006C1FB617E507CF071
-:10EA4000E4AE0F1F02945F2A9C179BCF6C18C0EE98
-:10EA5000450C8D4BD3850DB2A70CE2FDE1CAFBC678
-:10EA60000CF0F711E8F73AB81FD2C1FD904E1DFF28
-:10EA7000FB352ABFB4C3CBCEF57424E9F1DC0EE13B
-:10EA80007F6F41E8E1D507D8399FD52904DB617E46
-:10EA9000C00F926F2FEA85FE7BA324AAEF285D7C2E
-:10EAA00063719202A06BE72AD413F265261BD0F59E
-:10EAB000F6BF5DCDFD2BA677CAB89E298371008E67
-:10EAC000FC81A87F4AF97747199BD1BE1D4D5C3C5C
-:10EAD000DEC2E31277ED55F865FF17386EB02750A8
-:10EAE00068000000000000001F8B0800000000000C
-:10EAF000000BFB51CFC0F0038AAF9B3330E4593198
-:10EB000030CCB1666060B56160683047C8BD114700
-:10EB1000B0A9897FCB53A67F932403C31620DE06BA
-:10EB2000C43B2449D7CFAD8D6037AB3230F000F90C
-:10EB300021409A558381E1B51603032F903F03C806
-:10EB4000DF03C42780580528F612480BAB31307C10
-:10EB500001D27C40796D20FB8A1A76F3F9B5F1DB9E
-:10EB60007F5C0395FF138DFF401DBFFE2C4D02E11E
-:10EB70004B401E1BE6B3273F3E8228D03B10F830A7
-:10EB80005ABA7E6CC2C0F0CB9481C10E9AF60F20A7
-:10EB9000C90700C59E9840E34D8F81E1961903C3D4
-:10EBA0005E1CF9E20450FE36503EC61CBFFD0ACC86
-:10EBB000A87C615E4C35DF9810ECC942A872C7840E
-:10EBC00031D5F38A323000002621667DD80300005B
-:10EBD00000000000000000001F8B08000000000083
-:10EBE000000BE57D0D7C54D599F7B973EFDC99499D
-:10EBF0006E269310C24002CE2411A2243040C09849
-:10EC00004CE0E68B041270F87829565A27E8226DFA
-:10EC10004111DDAEEF2E2DC347435454D8A26BAD46
-:10EC2000BFDD812AEDEE6BFB0B162D9B049D8480CE
-:10EC300068F88868B5AE6D376AD7061B6C88C1D294
-:10EC4000DF4BCB7B9EE79C93997B33930475B7FB9B
-:10EC5000BEAFFCFCDDDC7BCF3D1FCF799EE7FC9F88
-:10EC60008F73C66AB111D775845C85FF1610327F29
-:10EC70002221646EF42A9E57D8492879262169F604
-:10EC8000435D33320859A8C9BE1A0F2113EC0D9DFC
-:10EC9000A488903262F3D8BC84B44B3FEB9A41EF26
-:10ECA0004FA4587D3602FFDD4BC83C4236DBE99F5E
-:10ECB000B4FC894BF44ABF3FF1474B98488454CB8E
-:10ECC000F54482EFED122FAF6B4B3209A922ECBF56
-:10ECD000F99748152D46AADC77D593198454BA685C
-:10ECE000293B7B7795952784962F25AC7EDD6E7C1E
-:10ECF0005F4A765F949D70D72F070A697D5754E36A
-:10ED00007B77CD6F8913CAC53C8771C01F940653AA
-:10ED1000494AC687C9F4EF9BC84D57657A55C61155
-:10ED20007273942EE62B212142C613D2C2BF5748DC
-:10ED30006006DC13F23CB69F2EE858DB43DC74DC43
-:10ED400019C5C457430738A1566F07BA9456A91E70
-:10ED50001BBD6FAF9E37B14723E4BB179AB3480181
-:10ED6000FD3CBC01E998C1E9D87EE1C577EFA6DF9B
-:10ED7000FB6B89CF46EF5BADBE898182E1FDF1D7A8
-:10ED8000A63B08AD676FA02319EB21E4CF57337979
-:10ED90003DB984B40572528371BE13D7C7B6BA08A1
-:10EDA000B145EFF7E8A4B6591B5EEE4598CCB950D3
-:10EDB000FD1AEC6729A7E57725B2BA19DB5D8DF35B
-:10EDC000D4CAFBDFA97724F714C0FB48B2858E2391
-:10EDD00074D1429EA555B4F55524417FB7EB9608F2
-:10EDE0003C6FEB53C3400FE26ECE5A5638BCFFADBA
-:10EDF00017D7CEC671053718DAFDFB3E3A5E0DC651
-:10EE0000F77CF2425ACF409FC525D379DDCB9FB71F
-:10EE1000069B935DF05D6F3ACEE7635BE9DFD3124B
-:10EE2000D3E3B1F95FCF096A50CE6EA447DFC0C902
-:10EE30005C3A6F6DFB141F8C6B347AFE3D6F47DCC0
-:10EE4000A7FB22952E5AAFBFDF27811CA5F71132F1
-:10EE5000CE0B72D176CC09F35B4F502EFC810AC7E2
-:10EE6000F56C1C3ED903EF4FC9C01F7E5704C73154
-:10EE7000D41FE8DF34E8A71BAF4FF2F69E8079C4B9
-:10EE8000F16D774CA5FD1D2856B09E03FAF672056C
-:10EE9000EBBB1291811F37307ECAF004B75981FE57
-:10EEA00077125FC803F5121CF73FF2F13FCDEB1369
-:10EEB000EDB4F5A5972BD0BFD5C40762522D6F696D
-:10EEC00087EFFDEB59FFA73CB04902FA5DB7A507F4
-:10EED000AF61DECF3DF03D2D90BDA95F02BA4DBEC2
-:10EEE0003F82D77DDB7ED90EFD4BDD491CA00BF6A2
-:10EEF0005659D2E0BBBD0B2739E0BD3340059FEA30
-:10EF000003BFCF756F271DCFBE2A05FBB9AF8FD2C8
-:10EF10009F9673865C3E906B67C8C3AF3E1F946F2D
-:10EF2000E5E338CADB7D998FC719D279B94D055011
-:10EF3000CE190AE135CCC7493C1B91EF360BBEB365
-:10EF4000066F8479CB18246E42E5F9E8A78B274237
-:10EF5000BBA27E73F9834FB5CC817E8F1F24EF59FE
-:10EF600067C035D200ED4D837138E1BEBB41423DF3
-:10EF7000154639F2F75908C98FEAA90CB2ECD55BEE
-:10EF8000F0AE1AE548E881D23ED522A5C6CA591589
-:10EF9000CAC13E2E07557D11E4132A67C72C944E33
-:10EFA000A10B54CE287FB5062C38DFCFF4ABA88751
-:10EFB000497E246B59CA70396ABBB86E36F45BC897
-:10EFC000D370FDF1FF867CEDA3E308C6D16BA23DB3
-:10EFD000216FE6F7A3CA9B2B84F2D646E52D04F4F5
-:10EFE0000C581C79207F4D1694137755733B9397DB
-:10EFF0000D286F1977B2FE4C58134639184DEEF6AE
-:10F00000795CE50AD4BF9AC9695BDFFBDB6C301F12
-:10F010006B08D71357DAE1DEFF00936BB39C99E5D9
-:10F0200030D5DF8DF2E9DDD94FE0EAD9518F7C4D43
-:10F030005B71A0FC2590C33690C3A2FF7FE4B012A1
-:10F04000D6712A7769DAAC4E171DF7A27EC2F0900E
-:10F05000B6B713D6F1EA6C1B5BC727BF7DDB3DF467
-:10F06000FEA43519E97F723C7D5804F732CA5DBBB6
-:10F070007757F666FA7E518684EF09598FF25D2341
-:10F08000F0123CA2F253DE239179E950EE833D95D4
-:10F09000F4FB577B890F5EBD9A2D637DC7FA0893F9
-:10F0A000632E9F357CBCC7F8FB81CB240CF2B900E2
-:10F0B00020097DFEE9F9FE2976FAEAF7962B8524E8
-:10F0C00087AEC79C6F05CEA8E6F2FF6A86AC83DEEA
-:10F0D00038B625254CBC585F04F8EDD5076C61990E
-:10F0E000B6379097FB5C8400FEEB9FBA99BEEF7435
-:10F0F0007D92122B9FBD7C1E3EE2F3DBC7F144CB19
-:10F10000F4C03289E2A257F37251BE06F23E994230
-:10F1100028A9EFC9FDC3877025A4590DA40CAF47DA
-:10F120007CDFE50E7E59A2F3D31BFEC009F37DE11F
-:10F13000F02733E04ADCE310778D86CF4A040EEBEC
-:10F140006DDE01388454513E9917E59309BDCDC752
-:10F15000806E257D0C8F91DA8D0C67BA185D28FEC4
-:10F16000CA82EF5EE2FD6A3D4F719A86E50CF5B406
-:10F170005A7BD60458FDF87D898BCDEB907EE174E7
-:10F180007F529208C3896CFE4AF8F77EA5F9BB80CE
-:10F19000B7FD2765DF36FA9DFF724F1589A3870EED
-:10F1A0004869C8AF65FD467E6DBD705006BAD0FE99
-:10F1B000CAD0DFD2DE6699E971C66725621DE97D96
-:10F1C000DEA0DF45FBADBDCF239E1FE855505F2578
-:10F1D000A26B071FC74B5C9FB4F179A20C85FD3F62
-:10F1E00046FBFFD008DF570233C6F45BC8DF82CB93
-:10F1F0004906BC5ED69F6EC2FFC6FECE57587BF353
-:10F20000815E2431BDB648E9BCFECF462FB35E1106
-:10F21000F5B6021D0B86F78B00538B7ECBFFFDE905
-:10F22000DA067F30FBE504C819E93924833C56CB64
-:10F230001AEA93D22A89E1723ECE7AF89636552B95
-:10F24000E4CA23A19DB7D82F856B006FF87E807626
-:10F25000E24091CD037A688267AFD213C36F8BF916
-:10F26000F7A2DF47B7EA38DEF6B96F6741B9A3D72F
-:10F270006FCB867958E4793B7933A5FF092E772D3A
-:10F280005B6BB15CE965F2C82C98973C2667F3F993
-:10F29000583AB9DEE9E0747B99AF9B6F6D0DE2F5EA
-:10F2A000CDADEBF17A6EEB26BCBE7AF9790DE6AF07
-:10F2B0002B3F17D7AF5AA5598967579598D6859789
-:10F2C0003C14EFD0F2757D6B77CFA2E33E75D98207
-:10F2D000FAF9547EEE8878A585CFAF28F78AFB0728
-:10F2E0009540B7FA5EDA5DEFF0F2A5BDC6764B89C0
-:10F2F000D40CF8AFD4F7BA42A87DB4A468BF168B7B
-:10F30000635A2F641642BDADD2AF56CCF124EE47FE
-:10F31000A9BF1BC7B924F28EE249495CEEB4D25DA5
-:10F320003F07ED54A68F4A7DEF55E9B4BD9A82FDA3
-:10F33000F5C817838A05F8A2BEE0109F5F17CEC7F5
-:10F3400012B19E15C9B561E84FDF00F6B3AB401EA0
-:10F350000FFD7BC822235F2EF1D810CF266C7F5083
-:10F360002111902F2582F3748AD6037C719ACA31B9
-:10F370007BDECDEE69BDF0BEDD6BD37C404FB7F0D8
-:10F3800047AC37F0477DDE9C53BE22584F64C4978C
-:10F390005D972B94347A7F1AD6574F943F4B397F21
-:10F3A0009E8679073E0ECBB8FE09BC2CEA3B7A3923
-:10F3B000E79122DADEE9B035EEF7812AA33CDEE2FE
-:10F3C0004E36DC57658F33DC9FEE9BFD6600DAA37B
-:10F3D000FD073C47421B0CFD3F0AFA0BDA7349B8A4
-:10F3E000FE9FB852D5770F940B1BFB65EE47D7E510
-:10F3F0009CC757D27A4F1D96914FABDCC67E555EA7
-:10F400007AF314E8A73AAA5F806E2FE98A0EE33EEA
-:10F410007D3825BC8DF2E54B05AF27036EA0FF6953
-:10F420004B683B9584CD6F4586B19E537DEF3F3C45
-:10F4300013F0AE5D463D57F1C78E9D00AFCE16DD91
-:10F44000D709746E2512D2A9ECC20119EA5B1536F0
-:10F450007EBF728D913E1B578E33E97FA37FA9D269
-:10F46000C3FC44F37D17B1BE12F0FFD0FB0ACDE818
-:10F47000179A0FCA20A6DE32935FA8C4C3FC4225A8
-:10F48000E01712E5BC6498DEA7F7D8BEDFB4AE9BE8
-:10F49000E53BA1FC5BC87AF0A790FEE5A3E096ED02
-:10F4A000DCBF62D4B744D927C5E28A166B7332E257
-:10F4B00086594C7F91FEF4B8FE2AB31E21E43EE447
-:10F4C0002B4147E20A918C79307E5EC6ACFF385DF5
-:10F4D0009AE8745CC57520C4F18B27AEBC9BBFCF86
-:10F4E000E6F2BEB097EA4D58AF7DB20BF4C6A9CB99
-:10F4F0004403793C4BF99DB5DC7335966FEB7A9BF1
-:10F50000912F69795C064F5DF6A1FC062632F96DF4
-:10F51000F7D628694C7FC69577B31CF492D0134573
-:10F52000745E4FE5E53EBE927ED77558E8018B8E3E
-:10F53000727598E1DED37D9B915F0728BF02D98762
-:10F54000CBFD392D76DDFFAF9277B39C0FC9FF302D
-:10F5500079677AEBD4A005C7537949C17AEAAE102E
-:10F560005CC7CDF27F9ADB6F2FE96F6A3E580F0BB5
-:10F570003E40FB987C66796776486B2FC1F6CB2EB0
-:10F58000BC2FD3917F61F22EE45CC8ED35CBFB7FBD
-:10F59000919C9B9F7FD3C2717F02398DCA7F08CB1C
-:10F5A000ED4821F9E0676B91927CDBBD20EFCCEF59
-:10F5B000632E3F4E16FE587BE837745C0D9459520B
-:10F5C00029A937929E29C00F13267AF0FDDD969E59
-:10F5D0004CB8FF3DE9CF9C4EAF250A3902EBAFA4F2
-:10F5E00013F200ED92E4719135B309794C0EDA65AE
-:10F5F0005A5EEA8DFC51A27426F7130FE0C16952DE
-:10F6000030199EDB289D345A9E28E710271212419C
-:10F610007A2DE542B7D4AE45D00F5F6CEDEB117497
-:10F62000C7F5638DEBC3E9B45E1291AE4E8F8EF3D6
-:10F63000A0359CE5D3609CE1EFDF0D7EABEFA9BE6A
-:10F6400067E3D0DDF219C709EA07E96961F40C59EB
-:10F65000927CCFC6C15B8BAEBDFEB792E8B514E815
-:10F660003873381DA53E4A3FA083F2E7AB6027966A
-:10F67000BA197FC9BF5775F0D310D91EBE3E4E3F91
-:10F6800036F27E3C26EB37516443E4CA66A44F2B26
-:10F69000CCBF06F4CB20DF8CE1AF85B28AE393EBDD
-:10F6A000C8265C5F48C4027A64B4F9B02A44916108
-:10F6B0001EBBAFA2DE6DE4FDB3D1E7DAECC4F325E7
-:10F6C000D7F9FA23749EC8EFD93CB52E32F2E5166D
-:10F6D000DEFFFB78BF403DA17D04F5537AC9BF53DF
-:10F6E00037C55B27760BFA737A99CBB7DECAC62F7C
-:10F6F000CAEF92993C85AE7DDE564DC84D3C6F8277
-:10F70000DFA5BE1389E66F53388E7CCF932D7CBC6A
-:10F7100021692CF2B090F3A55C49E70DC6576DA4A2
-:10F72000E30E3EAE35BCDEDB25FD7F023F4C93028F
-:10F730007F075752D58DF2073C0EE5A613FD5BFC03
-:10F74000FD569053526B7C4F9F6FC7EF5677637C8B
-:10F750004A3C3F26E93B65F6BE11BFD38DEF291F1A
-:10F7600036C173CA2F449E0DCF3DD81FCA27C44E41
-:10F77000EF1BF7DFF165A02BFDFE51AC9F9C337CA6
-:10F780006F050591CEAED26C767D0AF88EDBA73B75
-:10F7900056EB4857956CE2F6335BCFE6F3F5CCFEBB
-:10F7A00047B60E0EB854F46B290E3D1CA1D7745702
-:10F7B0004407BFF338D21D027B6CD54AD9A0E75766
-:10F7C0009BD6972FDF695C7FD76CC832DC7FF5FE54
-:10F7D0005CC37D70CB74437D6B77CE31DCDFB9BB0E
-:10F7E000D470BF6E5FA5E1FBF54FD719DE7FFD99A1
-:10F7F0001586FB0DCFDD1637BE29D6BB072DEF6D65
-:10F8000008D071ED805731785189C62F2D0C8F1992
-:10F81000BFA3ECE751E6413982AE08339F2AA6F830
-:10F8200067CF90FC6C36ACB71D216F064005DDAB91
-:10F830006888FF437A775E66140F547AD6D5C75B23
-:10F840007F457F145EAE9CF454C2BCE98AB19CC271
-:10F85000E3B59AAF1FFD30E678ADE25988EBBBB94E
-:10F86000BFEFCA2919A09768DD1E8CD36A635B4F6E
-:10F87000471D1FD584631A1F6FAF1CC6999B785C08
-:10F88000F38BFA65E8DE58C715EDA711F78838F94C
-:10F8900012569494789F417B6C09F40FD6E7228628
-:10F8A00077ECF41F5B6719FDEB78F9C0FD2E2BE0B8
-:10F8B000E34095B19F751C47513954404F94E49BE8
-:10F8C000DE433F674039235EEAE4FCA8293C5E3E04
-:10F8D0008FCCC379E072BB4CC86D35F3731057FC05
-:10F8E00038FAE2CBB4D01C6CDF907FF05A7E6E12F7
-:10F8F0007CB7A489786C149F3C38779BAB0270BEB0
-:10F900006EF5D5D2D2953EEE6FD265C4B3D7E5B3CE
-:10F91000FBFA2AE67F5A1CEC463F60FD9DE16D70C4
-:10F920009DB43EA2603F4C747DCA134E436CC0E947
-:10F930009BC5E99525E8CAE928F4F8A40DC679AC79
-:10F940002F32D26B29A7A799CE4B391D979AE87809
-:10F9500014FEA074999B808E4B381EB5CFE5F6DD62
-:10F96000607A5CBBF129EE1F13FCA398D635A13F4A
-:10F9700086D637CEBF8F811E079CE7E23885AF7BE6
-:10F9800089E4A83CAF614F39F8C933AC86F8C54269
-:10F990003ED6923C16EF28C99011F797B8DF88EB56
-:10F9A00067067A57CF8BF2E7D15E667F34BACFC94C
-:10F9B000304F75790CE7EFE4F411FEBF56EE1735C2
-:10F9C000F7EBC4945036E0A3939742D99B8BC0FFCA
-:10F9D00023219FB4CDBA379BE50BB07EFA797BAF7C
-:10F9E0005C0CA1FD76B277E4F8A2C0F966BE29F1FD
-:10F9F0008531CE5802FE62DA5E6D3F5D83E8D01736
-:10FA000046FE59F61402AE8E28D09F7AF75A05FDAD
-:10FA100065EE0605FCCBB5EEFD95400F3F09EF7096
-:10FA2000825FCD23F92240C70226BFEBE9BF58F918
-:10FA300015FDADE90B2A20EF351EA35DE3E7FC566B
-:10FA4000ED363DCFAB417EF39BF86DBBE0B3EBC928
-:10FA5000F5B17CE6E7F3A25ECCE1F21A9FCF44FC5D
-:10FA6000E2DFB99FF5573C4EF72E8FEBBDB3D58340
-:10FA7000D757B6E6E3F3E35B7D78FFF6D662BCFFCB
-:10FA800039F879E9FD1BDC8FFBFAD600DE9FDDBA81
-:10FA90001AEFBBB89F56F0F12E1E4FA996DBD0BFD0
-:10FAA00058E70BDA5D31FC54C7FB8DAC0F38A4204E
-:10FAB000BEFFD536E58802FC756E484E08EA8BE538
-:10FAC000F5DE030F51BAD8BE4D82802B6D1DFFAA03
-:10FAD0004CA5FC5F57EBB5AE83F642CDCA1CE0C720
-:10FAE000C8BF2AB9F0BC7E96F58E38ED8B7612B57C
-:10FAF0006FD66F2B6A8D76B05FF8D1FB832118E744
-:10FB000084FE6004FAE777AB9E787EE1F689EBDC51
-:10FB1000C04F8D17836EE0A7C689276466AF337F19
-:10FB2000B8CAF95494F7BB8DF17C95F7BB8D3E872D
-:10FB3000FEB6F58F4D0E44B952A559766989C7674F
-:10FB4000F637ED94E2DBAD4956866B9D3CBE4A75B7
-:10FB5000A60272062C0AFD9F40D906E44BD398DF1B
-:10FB600022D917E47AD9B88EA7150702A097B40C4A
-:10FB7000E2AB01F5A6F5B8816FE4E285E7619D256A
-:10FB800005317A1BEC1EB3FD1F7B2FE3D2154A49CA
-:10FB900087ABB91CA3AFC659A86916EBDFA3DCCFAE
-:10FBA00021E8AB71FA96784EFE02F4EAA33EE68FA6
-:10FBB000793483C565078AD7222E2BE176818DECB7
-:10FBC000C1F249A419AF3B38BD078ACF11907B59C8
-:10FBD000A1B83903FA630F87E8F74E937E573423B1
-:10FBE000BD254A933580AF7B1583BD2115333D6F0D
-:10FBF000077B1DEC188E5FA2765E905C05E28F118C
-:10FC00004FEDB41AED3171ED552CC80F2EAB299F75
-:10FC1000EEFF7AFA9DF842E927ECC4219C77EC6B61
-:10FC200004E231229F50947FC5E46F52B3591CC641
-:10FC30005CEF2D5646F705568E8F059EF09BDB71C7
-:10FC400084809E2AB5A71CD2F07A12B5477A678FB6
-:10FC5000E2B7DE86ED9F555CCC9EE0F940D42C9750
-:10FC60000CF6895D77837D38EC7BB7C520A7C3FB95
-:10FC7000CDE8F345F777093548E1BA54E8E1628603
-:10FC8000279779289EA47F2ED3189F9E2997C2DBA1
-:10FC9000914F7583BD555B5C731EF512B547D479E2
-:10FCA0001CA7D3FE3741BDB49ED7278AEF86F489BF
-:10FCB000E5EACCE1F504AA18EE21A17F5914EB3F47
-:10FCC000085076C99F0DF5B2EF69D1F6ABF1FAC1D4
-:10FCD000F556A0F8DEA59A13EE75E949C07B05310B
-:10FCE000F800E89A6733D2D9A4FFAA86E93DA3BEFB
-:10FCF0005D48F9F7086DA756DE540F2EEF9ABD6BDD
-:10FD00000FBF8ADD117688276EBDA7E08F9B01FDAE
-:10FD100019F10AF1B13C8ECA90A71EE99E2191B05B
-:10FD200017FA6FECC7C26C931D96611EC71E9CC765
-:10FD30000E85AE2374BE3AE83CEE41FB38BE3D254D
-:10FD4000ECBC05DE41B4A784BD47B8BDE7A2FF62A5
-:10FD5000F158192F5F7EBF4701FC5B6E37F9998719
-:10FD6000F28F09DA530B88B1BF65DCEE2B33D97DF6
-:10FD700042DE5F14FA52D8B55C1FDE22ECA9B291C4
-:10FD8000E3CB9DA67CBA2ADAF1E66B900302BD8232
-:10FD9000781319A29381BFDABD539B2394AEB7F8B1
-:10FDA0001C2CDE42FBA9087D8E7462387B292F7FD4
-:10FDB0008B4745FEF76B2C7E513F8ADFC25FCCE25A
-:10FDC0000667ED125B0F42E44D12931F5EE961FA84
-:10FDD0005A33F145B627500571204D917C61329C14
-:10FDE0005FABB83D07DF6FA1A4A8CAA336F9EC78D2
-:10FDF000F9E5DDE05A2565B40F4F7913CFAFEEEB8F
-:10FE0000AF84E919EBFC1213CE3EDBFF3EE6750D25
-:10FE1000144818F769F77E8AF68188EF44E977027B
-:10FE2000F351FCC59FA0BD3294B7C5EB5B2AEA2B0A
-:10FE30003E86F19AEFB88E25433CE60CC471E9F793
-:10FE400067947E0DEC9045025F518A46043DBDD11A
-:10FE50007C9308B7ABCEDADF4806BDF912C7F54789
-:10FE6000FD726D3C3FE70299F999C5F54695AD3BAA
-:10FE7000F35486E7C4BD98DF217E924F15313BFCD9
-:10FE80006F0DF36EAE1FCAAF46FF60A460247BB453
-:10FE9000DE44E7292A5FF738DE180DD78A719AE920
-:10FEA000601EA7F93BA7CAFC65775AF5E9EADC684A
-:10FEB0003B62BD33975F96202FA7BCD8E89F5C704C
-:10FEC000D9989773A73558A2527A562AD2CE540F92
-:10FED000EA3594A78E2B1AE29881FE8E9D30ADC72D
-:10FEE00007997FB48CC8611B5B17EA216E27E44633
-:10FEF000F0BFB91FA3B55F36D883F678F9E5FE2ABF
-:10FF0000E0BF5BFCEDA8579750BD3A2E8E5E5D2892
-:10FF1000F7ED1C07F2EB63FB3BCEFEB2BB0AEF35FD
-:10FF200009F361F5B25C651CF0812BBEBF6A3EE748
-:10FF300093E1F13CA1575D0AE006B3BF6D3E97BB6C
-:10FF4000F9267E08AA4338E8A6ABB9A3CF53227E90
-:10FF500018E81FB82F9E1F555C13E55DDD4D4CF46E
-:10FF60006D33FA9FCDF5087F1091DBB2419E85FD80
-:10FF70006B2ED7A4B2B8C7F1C2BB486C5E95D00750
-:10FF80006A71B3067EF1AEE291D70B733E5C39F431
-:10FF90003786AE9576633CF609457F10F8318A9333
-:10FFA0001A98BD5ADC80F6EAD202BE2FA8F02EB411
-:10FFB0004F855DDD78F321CCE712F95AC23E35F763
-:10FFC000BB6BE2F398CF335ABF851D7FCA26B33887
-:10FFD00004B5DB3D68B753DC17E7BB576C8C5E3F5D
-:10FFE00055F4FD20AF3BADBABB01E28C8536DFB3E3
-:10FFF00071E6A1D7C6E4BB2B41BCF55710F8988B2E
-:020000021000EC
-:10000000E3403A98D71B61C78A7D4A13DC4C6EEBFC
-:10001000B81D5B5AD080F298E6A6762BD0CDC7ECFF
-:1000200056D267B453976ADD5930FFE6F54E1EE4A9
-:1000300076ED18EDD65D0EC6474117B1BBE97B875B
-:1000400042A1295DFF1E972B8E013D76A511B407B5
-:10005000CEA4A9E10371FC0D6F737EAB963718F83F
-:10006000AD8CE312B5AA47037FC09941E6C74B3474
-:100070006F0F99707A4E3E29B739E1DA5F0EF4A01E
-:10008000F7BA0DAFFD989FFD70E1BA9C78F51D6839
-:1000900052E2AE4BBFE3F3B65CE46BD7327FE4DDF4
-:1000A000052AFA8527D4BE7702F9B49EF3E9121B1C
-:1000B0008EBBAB50C179E9BAD9DB0C71CDAE423BF6
-:1000C000E6A3B417FEEC9790AF5D562C19F24B04E3
-:1000D000FF9601AE86FAEDCCDF79B79BE9E12E8D74
-:1000E000E3179E37B291CFE999C31F3863F34656A1
-:1000F00008BEAFE77E72137EA26A246E1C47E4211D
-:100100007F5CCFFCC2778BF11E39B413E4AE8EF363
-:100110004DFBA5756E94CF232C3FAFB1B001FD45CB
-:10012000ED13DF52E17EA3FB4315EECDB842CCEBDD
-:10013000DDC53F65F9917C5E37823F9EF2FB4B99AE
-:10014000D3AD1E7ABF3C72B315FC9DC23F3B2C0E53
-:10015000C5E329356CF8A4C6CDF0F589CC6492943A
-:1001600001F492C312D02DE22049907FE6B6861D9D
-:10017000F4BE4EE99902B825D984173F7EE1503686
-:10018000C8F7F119BF55A0DDEB8ADF6B84714C2AEB
-:100190003E84FEFEAC23873AD3693D4BF3894FF78B
-:1001A0000CEF4F355F9FEECE60F94277FBC221D84E
-:1001B0007776E10ADB4F51F1C21B95B0AC0D8FCBC6
-:1001C000E804708888EB286E1E17E1F10972E5AA31
-:1001D000143B6F754AD00EFAB7B1F80D27F4773992
-:1001E000A75BCE61B901F8BBEA85395F013E2137D3
-:1001F000DB5CD7D3062FB87EEE9CAAB1F777B17A35
-:10020000E70769F9BA8243D9EB0A87EB9721F92905
-:10021000F8C3D620EDCF99453FCB06DCF606D5BB1B
-:100220001E6897EB2DB3BD645E57CD7931E67167DB
-:100230002ACB6A6D7361BEBFEFF6C6F019D5036BAA
-:10024000A1FF1B9FB4631E57DA91D75519F41BC544
-:10025000EF3552948F36723EAAD398FE6B2C24E170
-:10026000ED12F0DF87F5A52077AFB27CC30947DE3A
-:1002700063F9A3A6F5A18BAF1BC2EFDC35F17D942A
-:100280009F8F0F73790959A4587F9256DCBF12E6ED
-:10029000C52C27E27E7E7F4FDCF5E15D1BF79B0CD2
-:1002A000B2F71AD5DF10D736BFF7737BAA0CAE3181
-:1002B000F5DC6763B8575CAF210FE1896F53F96FC5
-:1002C000DFDDE1BE03F59486B87DE39143F910B319
-:1002D000C93C7CA88AEB0BB4CB643ECE09C4837ABC
-:1002E0006AA96667F103139F5B8BF747003E8B7526
-:1002F0001A0C722533AA47E4583F441C3B8C84F403
-:1003000037F362F2BEE8FA4E40AF54BA99FFD5CC4B
-:100310002769C554EFE024502E8C89FB9AF9B64E1C
-:100320000BBA219E4DE5E73C8B7FD2F50AFC137298
-:10033000BD0FE793F3A785FE83F52FD967E44F6BD5
-:10034000BE6AC02BE67EFCA3CD88FFC5FA9CE6EE14
-:10035000C1FE2DD59AB3A1FD09EE1EB4B7A87ECF7C
-:1003600086ABE033A1AF87F8AFF0A6C5A0DF81AFC1
-:1003700021447EA6784E12E8C13A37C329C4E44F1F
-:10038000EF728F6C6F749AD6BF332E665FD515935C
-:1003900024572AC83BF33B753D92BE3F39C62FF721
-:1003A0004FD6608B2DC6BFEE2CF8D2629713F40C9B
-:1003B000CBDF2AA1EACB9A1BF5670ABFA988F70908
-:1003C0003FE9307F66413BE6775945DE058FFF0DFB
-:1003D000CBFB4910771457E1CFB46D6F567C3C5E70
-:1003E0008278AC9EFBE106678FE20F65FE078ACF3D
-:1003F0007E6E1B3F3A3E3BC8EDCC5E501EF4BADE2B
-:10040000E6C2AB06F928B4AB5D8EF8B8ED656EB701
-:100410005D8B7C9E94E13BD6CE4726FE12CFA3781F
-:1004200098C9C184E2439DB178B8AC89D286CE9395
-:10043000DA44A690D4C47CB77448EFFDD4C05F43BF
-:10044000F878145C2CF8EB92ACFF19E898A85C1DC6
-:10045000EF47A2F78D85B6D5906F45CB9109A9ECF2
-:100460003A8D5E3B671CCAB6D0E7AF01FE8AE9470A
-:10047000D7F78EE0387EA5B27D365D97D6E5003E93
-:1004800038ABE8A9F6F163E71FB33CD9E7EA9E6D04
-:1004900054FE8E66DB717D3EEA6638E4752819C32A
-:1004A0004F9BD5E075F6B9A8EA7592CE959CE0739E
-:1004B000509A5563DB27767B72CFFD81185CB91BA0
-:1004C0005E4D84381FE39B07D51ECCC7B99DD66E01
-:1004D000A3ED1CD3E4CCB5F47EB69DF1E3B1903529
-:1004E0006EFEF36C3BC3CF9BD5C06CE82769DE84FE
-:1004F00072D620C901907FE21B9B7F6E474BFCBCEC
-:10050000D2CA68FDF3B1FEC3B47EC00D3EEE7F27B4
-:10051000AECCB8FE763EEE0821B5202F8FA619EDA1
-:100520004DBF9DAD7BF3A3F52F8EAD1FF3B3E6E278
-:10053000F32538CFCFB1E7F9762617E5B92CAF4DC3
-:10054000D051D4BB325ADF4AACEF08FB2ECFCEE3FA
-:1005500006BCDF02E79BF39F163AD87C44E3A6046F
-:10056000F56689C6FCF513FAC3C7E0BE9CF07D9919
-:10057000D2DBB87FEFA8D58BF900ED8E694F6FCA3B
-:10058000803C0923AEB7719E51EC3F946371BACEA3
-:10059000714C49760EE2E10E923BA29D237087904A
-:1005A000EB05C27F7AE500EE176BE1DF8B76CB4D72
-:1005B000B82EBA5FB11BF72B4EE8EDC6FD89152E9C
-:1005C0007E5E44DA37D1BEDEE5B897E1F9C99FE235
-:1005D0007EE505D907E5787E4245F45F7903DB3F88
-:1005E000EA62EBD402815F4D76C64B995D32E0C87A
-:1005F00044B8FE84147C26C2FC9A067CEF8F7C6D86
-:10060000C3214A57BD97B81CF4BE24C2E24C151C46
-:10061000D75728E12C581F6AB2993FAAE54FDD59F8
-:10062000B03E1CFF3413D78BEB94FD38DE498A179C
-:10063000F1FC4213FEAFB01FDA0679138B14898CDC
-:1006400023C3FB05FBD5C08E2871B3BCA0126AC5BD
-:10065000819DF1326D1FFC65157FA2F3678987EFDD
-:100660008D38A5562927AC1CC7FBD9CCBF341A9EA0
-:10067000AE30D903625E2B943D556097B4809D41A6
-:100680001FB5283B9474DAAF5D8304229BC4CFBFAF
-:10069000CBC9B630FB60B2650DD08D58997DB0CB1B
-:1006A000F5D776B40FE87BB00F2AB87D5061F7A27A
-:1006B0007D301A8ECFB1333BA1FDE254B49F228E20
-:1006C0001F66817E16F9E402DF0BFECB54CA4F8011
-:1006D0003C2FE07C28F0BE4DE0FD2B9B089C275072
-:1006E000A118F1BE8DF35905C7FB2D10F7027E3D11
-:1006F0009F79CA0BF11881F7AFB898BF9BE37DB122
-:10070000CFB203E43306EF779C1FC0BC8597B39943
-:10071000DE17787FC89EFC8C78BF4CE80F8EE76BA5
-:10072000386E10EFFBB9DE33E37CF3FB6BC5F98465
-:10073000E3F8283E36F26FFBEE1C8CAF94B8EC6801
-:10074000072CE80D0EDE4BAF995736FD662FCA51C8
-:10075000B20F3EB3713B6CD43C5013EEA776C34E40
-:10076000D87F539EC7F28ED2B25D55B09FBDC223D3
-:10077000A1FF69985C98ED806C17DA69954A83C887
-:100780008F1B11EF57682EC4DB8A523326BC6F963D
-:10079000AFDA3CDB887C9DED30E617940BBDA9DC1D
-:1007A0001B42BDA9DC1B01392AB7737F8FE36FDCC5
-:1007B000B1E73AECE2EB81D0D3425E3B1CD39460CC
-:1007C0000CFE1AE26B25578BDD5FDCC1F9F2078A5C
-:1007D00007FDAD1D76661F98F1D850798EF72B383E
-:1007E000DEAFB033BCDF311CEF173B62F09BD3CEE2
-:1007F000F0FE58F30A841D5B63B263DFB71BEDD8CC
-:10080000447CFD215FD7A3F4F4325CAB7811D70AA6
-:100810007A2A1CD7DA004FCEC4751571AD90E3610A
-:1008200074B5E61A706D39C7791DCA9871EDADB10E
-:1008300074315F2B46C1B5BB1C14D76A580E716D5D
-:1008400085C0B5495E03AE251AC3631DDFCBC771F2
-:1008500074A4313C6BC66389F107D76F265C21BE57
-:100860006F4921D9E89F1BC225D3E2E2924438C4E4
-:100870003CAE16C025DA5F029778709C663E3F9AC0
-:10088000A2A39D1FC529BFFDC6212A87BB2E123CEE
-:100890005141E0157FE48FC71A8A102F1087273A3D
-:1008A0004E8157043E11EB638BC2F249057E49E449
-:1008B0001F15D76BC52F2732FF17E21E336E117835
-:1008C000C55C7F8795E199963FBDF59F8A6316EEDB
-:1008D000A7DC47E5A45CD9867AC9AC075BC05B4D51
-:1008E000CBBFEC22E110D4FFA773727A1C7D6CC6DB
-:1008F00033669C32567CB328EF22E61B8E863B3A49
-:100900009430EE936F51EEB3833E32E31A333D736E
-:10091000B24903C40304DE49C4C750EE2E6714076E
-:10092000252A47F538E2A384F5D82F5E2B2E3AEF1F
-:10093000181117313D50E1667A20115ED9E57369CF
-:10094000B179AC627D69CFCEF925EE37EF55F1DC98
-:1009500084F6F353519F26C24B6D26B9EB003DA29E
-:1009600045D7AF8474E91D407917B86A347D21EE0C
-:1009700013E129B1AE9401E81F9F386E392589D95A
-:100980007D0FE6303BDAFC3E9A8762C45524A31003
-:10099000F9F81EBE1F3311CEA22B9893F9AF42D89F
-:1009A000CE2A6E87A2CF701ECF43A05D0DE4913C8E
-:1009B00058270276263767E64A2837CBE0399DD795
-:1009C000F22A16373A5728613CFD4CB90DE7F5D4A9
-:1009D000C72C4FB13D85F95FCFCC72F80ED02E7C7D
-:1009E0000CF5D275F99CA3BB0870C0AC24EE2F485F
-:1009F00067E35C921CD98071F339D32D21EF7079B4
-:100A00007F3089F7235DC3F85B1DC7A3103FCC9AE5
-:100A10003D7C9FC1D3495EAC1FF2E7B368B99D9698
-:100A2000EE8773E8238785C55BCD74FD98D31D08D9
-:100A3000638BA1437D9E5D7750FE77DCC8E256470D
-:100A4000AB6C98A7E380103BADF7A1FC9C9478FCBD
-:100A500021C6657EBE9F8FFBDCE47E5CDFCEF2BCF0
-:100A6000DF8D8A14027AA3A22E82631527ED7F8878
-:100A700016FD4A521AF6EBEC0BAF23DF9E4EE374E1
-:100A8000D025B4D7CE78983C855C5A18F66BD2EF57
-:100A9000ADAB46C807E92EAFC9677134422488AFB1
-:100AA000C11F39C3E9BDA256C671AF70EDBE17E4D0
-:100AB000F15CED1BC9702EE5D2410B01B95BE12A57
-:100AC000B90B9EB7A7303E063A038E5A51F5A56F73
-:100AD000C0F3FA7AE37C9C4CCAC171942A6C3E60E4
-:100AE000FEB2660F6F97AE7E41353386FEFE9FFDE8
-:100AF0008D14B3AE887C167B82FCBE44E39662F50F
-:100B0000AE1CF5474E28DEBF07F6CD048AD879180B
-:100B1000751E1282F86F9D8F44BC9CBF30CFA633E8
-:100B20008FED17E2F29556BCBF2907FC97830A8B1D
-:100B30004B9BD691523A57D9E9E04F67F37366AEB3
-:100B40008C765E6931C3F9A51CE7D7E90D18EFABC8
-:100B50007FA473770EBC97B3ABCB3D3C6E1A433F7B
-:100B60007284F9E79699F83CC5E4FF2FF599F206EF
-:100B700079BEDFD1FC675CC03F0FA673FE992DA143
-:100B80001CBD2E791E01B910745A9224E233C4633D
-:100B90008DE18F217EE0F36BA67B227A9AE964E6F1
-:100BA0000B33BDCFA498E89580FE89E85D5A5CFEC2
-:100BB00017A5EF05ABCD0A7CDB6EFD6D36B78F88D0
-:100BC0001CA34FCC74BBA07952404F9C1B3C87B8F0
-:100BD000EDF464CF57F07C2C2AC778BE279787E8BE
-:100BE0003C507970C6CAF3DB53409E299F59A19EA1
-:100BF0007A5DD21D207F8777DD8BE306397546E568
-:100C0000C84CFF61F247FF57447F7387CB91399FF0
-:100C1000ECB3CADFB7409F53BA2D4CF2E055E8D38E
-:100C20007AE2FA4AECFE5611676FF73606605F7A91
-:100C30005DAF05CF016A197C5E590BFB5D6B255CCE
-:100C4000D634D28DFDD59A58BEC4D4A71E2090CFDD
-:100C5000FEC864E2037DA535B1FC09FA1EF3270442
-:100C60007E17E73AD2F73ACB17319EBF94E233E6CC
-:100C7000FF2CEFAB403BA2939F8724EC0491F74AF3
-:100C80004CFB5E1AE1C9C4E8FE90A64B616647249E
-:100C9000D80723AE667BC17C3DDEF1CFDF003F622B
-:100CA000599E8A7EC4B2C1881DEA7BB8A0A316F300
-:100CB000DC6A2517C4E38E7FDABC03CE415A5EF0AE
-:100CC0007E5C5CD27AE1091F8CA3D5BAC7970EFA75
-:100CD000613B5BB71CD30A26AF1D01F7046BCB6BDE
-:100CE000BD3312E799DC93CCD7F7F6AF1D7810E24D
-:100CF000DE7DAA0FEC97C53CCE5FA7EC59BD96CE22
-:100D000067E722C9B78D3EEFBC61EFA60E88639CF2
-:100D100057D1DFD775E96036D819AF7DCF8EF6E8A9
-:100D2000F14F0F3E8D79267DEA3C18EF50FFAFD78B
-:100D3000D8FB8F5F3C097A6679FEF22268C7A190E2
-:100D40003DC04FD70D36BF0BE725D4F5AA7341FF41
-:100D50002CAFDD6FFF2BA053ED4FEDD783FD31E8B6
-:100D6000A986F9BC2E2958994CF55E5681F73B1996
-:100D7000D08E8FF874A46B3701BA8AFC04610F948B
-:100D800071BE6959E44D2131743D3798930274CE98
-:100D9000A9E5790C8BE400D8CBE75CD7A7A07FB29C
-:100DA00096E52F98E9B51C707A2AF4CF3B795D9CC3
-:100DB000F53BA7F60F5B83E00FBE81D9E7E6F77737
-:100DC000707A3B7EB7EE008CD7F17DBB0BE0B5238C
-:100DD000417EE6D464AEE7DD63F397083C43E96AFD
-:100DE000B7C6F80129DE5F9F1C1377BDD6F6BF9A00
-:100DF000CCF4C02539B819E85FCAFD2565DC5F92DF
-:100E0000A85F25A3F831281F219D96831F6326BB69
-:100E10004EA3D7CEC5DEC9063F06D1DDA067CF41C0
-:100E20007C0EF098B26C3BF4A3EB02F36724E2DF94
-:100E3000E579076FEB88D1775D563D1BECDCCE1B67
-:100E4000DECE82F9FFCFE2DF213EABFD69139CAB22
-:100E5000F550C1F2F1A0FF62F8F869988F6BE56375
-:100E600033FD5A16E5A6102DCACF828F87F3A584CD
-:100E7000F6A8E0EF44F301E5C01E157C9EA8DCB99E
-:100E800045D3E2F27FB49E8B23CAC16ACE57770066
-:100E90005F8D07BDACBB400F2FCC7A17EDD657B88E
-:100EA0003E1EE29394EEDBEEA17A27F4AC1DE3E85C
-:100EB000472FA978FEFAD167D6FF00D68DCEC10A9A
-:100EC000D787B88E97BB56D07EDD00F64301CE4F54
-:100ED000A712E337BC902CE2E6C67CDF9FB87E9376
-:100EE0005ECED659AD9CD27B265F276EF43E93042E
-:100EF000EBF94CBE9F62469B1A775DE61082146444
-:100F0000BC6E01E85F70D8584E1BDA9FDE6C81F82A
-:100F1000E08DCF99DEF37DD5E6FCC87F4F36ED7FBF
-:100F200032ADB7F64B23E769FC0BB77B9FE3F9BF04
-:100F30003FE1E70936F3F3049F877DAEF47A18F6B4
-:100F4000B9D2E72FC23E577A7F84EF7325D9633B2E
-:100F5000375E9CF7A4723A344D0C1BF6698AFDDFAC
-:100F60002D709E12E001B7CACEA17351B405792A43
-:100F70001C2F5A92FD7615F6737D44304FE5AFCFA6
-:100F800077233FECE6EBAC19C788F31ECDFD52A3E7
-:100F90007454C04F7574727075A0804F18F0CDDC1A
-:100FA00009FB1F8AC1D3A91AB32B1BB9DD16BA449A
-:100FB000C2CF4AD1F2A72F91830F313F5B4806DCA5
-:100FC000017F51165EDC4B10C72D2EDA85F617E037
-:100FD00040C06578FE580EF8BD5E443CB77870DEC0
-:100FE0005D0CB7E8C370DC10DD64A413C3E745AF44
-:100FF000A35F71716F7C7E8BE637ADEECC8BD9979A
-:10100000503F18ACE7F8C8157B6E826AE22B733D3F
-:101010006945CC7FBF249FFB7B783C44CCE78E4D59
-:10102000DDE82FEF2AB279C0BF60C689669CAF1693
-:10103000B17D64CACD6C3FEBE24B2C5E880C9319FA
-:101040003D9F4DE579BE2DAEA00FFC98753E13EE89
-:10105000E5E74B95E51BF1BC19EFABBDAA09EF879E
-:10106000D87AB89DCDE7998F09DA51CFEE63FE812A
-:1010700056B787F11F09A3DDB3C06D99F59007E25C
-:10108000566C7F66C920417F4949AF07FD4F0BFA77
-:101090004864EA0C3C87B809CF1932D16F01B87A9D
-:1010A000D3A11E4FE7784AFF050AD909E7CB64DAD6
-:1010B0001B749003D5BD09F7E3407EC338C647F6DD
-:1010C00058FAAA49A77680082CE07E35F1BB1513A3
-:1010D000EC87900F62E66FC4F898CAF94EC4BBCA99
-:1010E00079FDE57D2CDFCDCC0769F68BEFC239CFDA
-:1010F00015831A9E036D9EF7E171B0FE0F1E8338B3
-:10110000CFA524DF7698673B9B67318FAADC26C387
-:10111000FE0EA2B0F912F130B37FB5D4B46FCEDCBD
-:101120002F715EC256CDB48F8CE3F80ADEBB26C7A2
-:1011300021C3B9B5155CCF0CADDBF65C1ED762E7F9
-:101140009CB6F6CD1E31AED5EA62E7FE11D7F2515C
-:10115000F4DE76B68EF0F3054A8B4912E09CD23E5F
-:10116000C2F8EB114B38D91B5B3E6CD857EEEC5BE9
-:10117000B518CF6974B9AAC0CF564A58FC52EF25AA
-:1011800018CFD4C9213918332E112F51B95F4C957E
-:10119000D8B8049DCCFDBB7DD0680F7D2564DC0FE5
-:1011A00071DB03C6FD1BB76ECA32BCAF599F6B78AB
-:1011B0005FED996EB8FF92DB787ED0FF081ACF0FF3
-:1011C0005AB1BAD2507E59C0787ED02DB5C6F383BD
-:1011D000EAF4DB4CF2AB1BF8FBA8D4FD5D18BF258D
-:1011E000F997B923F979CB468B2387D879426807D9
-:1011F000C689B398F7BB7DA409BC609483CE5039EF
-:101200003B6FA7D7B3AFDC03F12A9F82062E3F576F
-:10121000A89AB072D56E166FA9CA886FCF0B3D68B9
-:101220008E4F8873014BFBBA910FCA4CE70096B8FA
-:1012300017C63DE7F33F34D3B91809CEBF18B67EC1
-:101240008F757C3CCE34EAF878BB25A4FB98D39B01
-:10125000787C631DD7507E179C4748E9D10D8F26B7
-:10126000B2F71A95B79D69F978FE4586BD424919CE
-:101270001FF577127DCE98F2D1DAB91F9FE82BC601
-:10128000749E6986DDC3F84267F868A7A487E1FC0D
-:101290003C731C55CD177154E339188E9D442FA013
-:1012A000240A55108CEB8772ECE11D12E493B37D98
-:1012B000A68D375870FD69BCA8EF81FC94A61B145D
-:1012C000DCE7582D6B585ECD66EB931F72EF217FE4
-:1012D000E2357DB5E1FC0EF77617C889FA347B9FBD
-:1012E000683C6D13D5D5F1EC859B52181E3AAB04C2
-:1012F00066A6207FE86E168F08E37968222F3751A3
-:101300003E2E058E2EE44322F0019BBFEF403C258C
-:101310008EFC56A53039F31748612BE497AE246153
-:10132000EB0876659BDB12D79F5198C2F359AE5CF0
-:10133000C573EE5471EE5E163B77AFDD749E65218A
-:101340006FF7788A9DF181F7A021DEEDE7F2B0D842
-:10135000B38EC4E25971FE8FDAFF3EFA99CE8C72D9
-:10136000FE8E886FEDE6FB9A2B2F5902F1FA3F9023
-:10137000A2209D9ED5AC71C7F700EF6FDB141F9EB6
-:10138000B7DAF8B8859D17EF6E9C84FBBE53FE8AD2
-:10139000307F17EBFF622EA77E777807498138F5FB
-:1013A0003B4FC2EF87A8C536F0E591333734E0797B
-:1013B000B1BBFB295EF446C797C2D71BFFBE8EDACE
-:1013C0005CC0432765F4F7D4F4B27CF3A5C5FBF900
-:1013D000392D3DB88FD1FCFB2525B5411DD6E5A59E
-:1013E000F5911D887F7C9E72FC3D13E2DB86BFAFCA
-:1013F000326CBFA586B8AB6D90F17DDB8F7CEDF8CC
-:10140000FB206E811BF5FAEACCE8B96165173B76E3
-:101410004208C67C6E98F9DC216197A9265C29EC0C
-:10142000B13A123EA648C3FDCC89ECB1BD29DC1E01
-:10143000BB81DA6374FE6FB7B13C5BFF16A9188CF1
-:1014400046C7166922E8AFA7F83CBD5916C4F35B3E
-:101450001A13ECBFFBDF5CCEDE2C8BE03EA7366FB1
-:10146000D0ED1BA17C610ADB27A85E61E77EA87630
-:1014700096D73574E5F93082AFE7396D782D75323E
-:101480007B7BC1D5E7B2465A3F4BFC4102E3A1FA50
-:10149000256EBED80BD03EEC178CB0F32BD4A6F73C
-:1014A000ABE2C9B390C3CD6AE067A03F764A9BC266
-:1014B0000ED403633FD772A6FCF9F5CD554D3F918D
-:1014C00042EB7DCDFA0F1E908F1D41E3EF4E89EB6D
-:1014D0006B5AD08EF477772483BD7931297836859D
-:1014E000FBBB617F615BFFF376D4A726BA9BEBB9A8
-:1014F000CFC9E653F5B0F7E417BA67798C9FA4CE4D
-:1015000029F1F5437F07EA9F6DD5FF0DAE0F56C455
-:101510008F43662A15BF06FA556B811EB8B6F51FB4
-:1015200040FF714A92FE1EDC9729FAFBF0FD3F59FD
-:10153000F50F989EAE727D981FDDEF90689E21702A
-:10154000F1617E2CBD3E1F9D33EC814136CF7A5038
-:10155000BBC67976D2EB1A585BE8F73D65F1E3ED4F
-:101560004F717EA27286F982623F8CDF4DF478EB78
-:1015700097284FE75F7562BE7B2800FBBACE4CB25E
-:101580009003317A4E9C63D0D8CFECC281FBA50387
-:10159000CC2E2478FFA3AF790F407C77E5142EC7BB
-:1015A0007C3FC61DF71BF7498B766F4E95C6249F6F
-:1015B0000FF3728DA94C3E1F4FBD46F9CC60F50864
-:1015C000395515765DEB62F57E98CAF82C294D12D7
-:1015D000F9E9F94E26873D29D7363F4FACC8FDFCC7
-:1015E000FC21E441F519F3F51EE1F220F415ED6755
-:1015F00019CC17ED6730E9DAFA9959F205F0B1D84C
-:101600009720274B067F78C0C9F8E90EDEDFB38A42
-:10161000BECCC9E477B97364F95DE564F2BBDA69FD
-:1016200094DF5B9D4C7EBFEC64F27B9BF373C8EF51
-:1016300047203F90E7C8FDF8E49451EF505C7C17D9
-:10164000D4BF5891F83E6FF21B29C6FE58DC1B240C
-:101650003A5B2C9F89C50D14BFEAB8AFE34D637D9B
-:10166000EFF0758BEAB1CD50EF3BBCFD1DFFC6E836
-:1016700007747C3E8E5C0A3ACAB60637EC8B4DB4D2
-:10168000CE059C6C9D2BB7B17D17E4246DBFD03087
-:101690009E6D40B7A1F184A865177F3CA1B8E3E92E
-:1016A00036D617339EDD50AF18CF82ABA74694478E
-:1016B000BF904757448675DBAFC45F17CE38D9BAA1
-:1016C0003990AC3F09F432F397B886397F25DA1F99
-:1016D0007356A90843FF4A14A6078916E99163C601
-:1016E0005792DF20C61DB4C4FAD97AE3EBC9E79C50
-:1016F0004372F71CF2DF3EB69F87F2F58FA19DDBA8
-:10170000C7B956E1FEAF4F98DE7CEB4F5BAC69B4D6
-:101710009DD5197BBF03D75F3B59DE4BC3C51C2743
-:101720004C434F19DB17D938919DA7D62819CF55AF
-:10173000FBB59077AEFFAE41BEDFCA913FBB7C7C6C
-:101740005EBD40E9D3CDF5528F23F7DAF4D2DC2F1A
-:10175000A0FD955308E2E3C6FD2A9EBF25E4E67688
-:10176000985B760E820E79145FA5F7167A3F0846CD
-:1017700037ED47309B10F76C2C1752F19C04BD17C6
-:10178000C651ADE9E7E14AF5D04770A57AE8775C44
-:101790000FF57D1E3D7402C644BF6FA23CD40D7C84
-:1017A000A88479DE2FB747F8584BF28FC5FDBDA945
-:1017B000B6DE035A08F206F3D93ED544ED46C0DE44
-:1017C00080C49504BF6725AEE58FAFB58311B083A4
-:1017D000E23AF0A3BECCED9436685F83F62CF8FBBA
-:1017E0003FAF1119E3F0E6FA1A27F3753F85F3F3DB
-:1017F000C475685FE9578CFEB54A7778F7EC22F834
-:10180000BDB33BD83EAC2B77905585804F8204CE3C
-:10181000E154E915F23745BFBDA953193EE5FD5422
-:1018200089A42C2C88EA91CA7E12595084F806F3B8
-:1018300066A11E0FAF275808EB7D9A02F1BED712A2
-:10184000FC4ED3E372303F35C6DF584E8C7885CEE0
-:10185000FF0DA9E371FE6F4C65EBD074B8D2F92F80
-:1018600080EFFA9C4CFF3D2E0766C2F360060B41E9
-:10187000D3F2BE54C62FB352E77E7E3ED941D8EF95
-:10188000F202FFC6C6AB9FE5FAE1E8F8A00EED5400
-:10189000FD6859E724FAC986E6063CFF78C175FD64
-:1018A0009F9C85FCDB2C15E3818D8F18D7911F72CF
-:1018B000FCF3D2B5EB19C41154FF2D81767710A635
-:1018C000FF426EF6FBA30D13731E65F0911A9899F3
-:1018D000D1736DAB5CCBF0DCAEAF3FE79D0DE76045
-:1018E000A95C3F2F74B7AB6B615E21DF348E3E0F76
-:1018F0000EF58F6A6FC33A15FFFC97CD1C2752393E
-:101900006E4865F2BB16E6E785F1FA1DA97F41FC3A
-:101910002FF4505061FA86DA4D21B09B565DDE748B
-:101920001C96A9D5646F35C437285FFE2DF4F3CB20
-:10193000F643C7D94F12862641BB941FFF8E8F678F
-:101940000BE7C76F717EFCF6E719D7D753191F272E
-:10195000C29F02870BFC4DF5FC23A94CCF7B9C5FFB
-:10196000CCBAF10FA90C77079DD7B86EDCFA05B495
-:101970004FF1C641685F4F2523E2DBE7F8F87F9C13
-:101980003A846F7F0CDF2DB5EB3F81EB10DE2838FA
-:10199000F91BC8938BE28D7699E30D25D69FEDA7B1
-:1019A000F88BE7D5DD6999179513B53F3E0EA94F22
-:1019B0001DC2214751AFEC6638A47EA8DFBEDE30E1
-:1019C000C8E1242EEFEF307DDCA0F6DC09FA594D9A
-:1019D00067F3A8A4337CF92A9FD7F7A494B8FECD67
-:1019E000AE687B5DC85F5B587B72F22CF67B204251
-:1019F000AF58256C47F887EBD3D977A29D45FC2AD1
-:101A000070AAB99D5FA40ED95FBFC071DD2FF60724
-:101A1000EBEF40BBFE285D23B17405FD62991743CF
-:101A20004F8EEB12E1B818FAFD078EA789B5334443
-:101A3000BF607C3D7BAB4B167CF2BBD411F8A39FFF
-:101A4000F3C7C5287F5CE4FC31908AF884CDC3EDF0
-:101A5000E38CFBCEFF90CAE8B39BD349CC97B9FF88
-:101A60000FF2F743F4F09C7C2616D7FAF3D356AD69
-:101A700006BF6593ECB3D0FBFF032FADAD0C008028
-:101A8000000000001F8B080000000000000BE57D37
-:101A90000B6014D5B9F0999DD9D94DB29B4C924D9C
-:101AA000B281246C20D858032E21C42841264F022D
-:101AB000448C88888ABA014C42802422B6B6D5CBA1
-:101AC0006242785A637D142DB60B420B16DB88A94F
-:101AD000A518700382F80EB68AD6DB1AC4F25084B9
-:101AE00005B55D5A5AEFF9BE73263BB3D905D4B696
-:101AF000B7F7FFE3ED3D9C33E7F9BDBFEF7C334B18
-:101B00000891482A215790FEBF1C13AD17F38A7C19
-:101B1000D42779F208991420AACF46C817F0373E87
-:101B200054C629022129842C946BE29431744079A3
-:101B30008BAB6604213DA57DF36B22F4BF2789F5AD
-:101B4000BF21635D798A8BF6F7D27658DF49FF2D86
-:101B5000127263438FE8D18DBBE1A3C373D408F342
-:101B60007C37C944085DAF75A67B9FAB804EE334DC
-:101B7000B9379281FD1E4C94B1DF84A13E2981F6D4
-:101B80007BFD1451D6D37E374E13541F3D57253F4E
-:101B90005702DF578E2261FF32A8C338B96F4EA4B7
-:101BA000735CC69F57B988DA49E7A95288BA3542AB
-:101BB000BFB17C9F136223CF73139F672261F384AD
-:101BC0003FBF95EF6B4269E4F157F2F967389FAE7A
-:101BD0004822B09F7566805FBE592D56E8B81551F2
-:101BE000F0902A95AA80AF180A3A733E21B7D0B177
-:101BF000263AC1AD80735A3E2C7A2AE1B98782C356
-:101C0000990F94E01D0478ADB0A913605E7BAC5AC7
-:101C100005E538499D08E54FCCEA242809F113521F
-:101C200048C8144E3F53AC36BF184FFF51643EDED8
-:101C300067656D5F0C85FF3F53397C092102F10B0D
-:101C40005F5C02759F08F35FE1DAF78E40FB5FA1EE
-:101C50008D3B2A858DCB500EC7F1BA88FB42F86CBC
-:101C600037FFD065330D3CA7566EB779AC0087536C
-:101C7000B19E5AD867AB73BDCD45E1FDB2A7D3EA9B
-:101C8000A6ED1F271084E3E93875369CBB753B69C8
-:101C9000E8A4ED629CD0D2A9835F8362C2F5E62AF4
-:101CA0000C6F6F48EA5C986F8A556D84725A16C53E
-:101CB000139DF7D6E4BE457AB8DFC1F1343F898D74
-:101CC000BF4566FDC2F739973F2F96046F1CECC9DC
-:101CD000B6EF4331027F4E827F51FE293EAA4C9FD0
-:101CE000E1A0385B2EBA4DB42EE70A11F9D41BE2FD
-:101CF000532FF2A98BF2A99DD2871C993E82BC7FFB
-:101D00004514BA1CC3F7590ECF238C1FC1E9B6DCAA
-:101D1000D123123ABE98F35B78BFBA2491F1B19BFC
-:101D200054459AE787A17DFF10F7ADB07DE79B6B27
-:101D30001E85FA4C657F45226D2EB9CF319D380046
-:101D40001E2662C946385941AE491C4E749B04EAAE
-:101D50000BADAC2EC5CE2709B4CC72FA568D04F863
-:101D6000B599DD2E5AFFE0E80722A174B6F1A1D3A0
-:101D700002A1F2627B8090E46C98478619E1CFF46F
-:101D80008530703EFACC2569EB51D05C7994A81669
-:101D90004ABF571605A69278C378F2059DCF16E87C
-:101DA000F50A803F2BF1C65D8A64FCBB9C549C15F0
-:101DB000E74BA3EBC279E4CF880FCEA33A3DD564BD
-:101DC00024218981BE1F3563BBCD3D01CF456CC049
-:101DD0006FA1732E44FED3F625DBFA9EB89FF6EF73
-:101DE000FE3CD67D2F9C3B50798CED8778EDC0D79B
-:101DF00062B51BE43B2116DC9F89FE077C362E482A
-:101E0000F79BCBF70B8B14E8F64F069EE761B1E624
-:101E100015C0C7AD56A2C6E7A37C7815F86198999E
-:101E200076A0706C57049F97F66B7F68CEF26C902B
-:101E3000D7AB25F77002744EB60994CEC7D275EFB2
-:101E4000A272472E223685D665273B7FFB7D8E7595
-:101E500071023C97C84CFA7C6CC07F46A0708877B2
-:101E6000D6552BF41C321F2F50C0C178C1A59099B4
-:101E7000F940B7BD2241F9E0447868FCA37E8308AD
-:101E800087ADA86A08D057B944BC56DA5F70B279FA
-:101E9000AF2401910C033C504540CB52E2C6F27E88
-:101EA000D1730CCE6395295EE9FEAD26AB6F890038
-:101EB000F8AB79B50AE15EAE1CCE0DC9B368720805
-:101EC00020775883ABF8F5E55EC5A2C87CF58F1086
-:101ED000DFFC03F98630BD3C6D28933B7BEC7D3302
-:101EE000F57CBF5C61F26939976B44627CB65056F1
-:101EF000CD89E7E0F3D55C1E8E4862F2B39544E6E7
-:101F0000E36712D9BCD3EEF5B50FA2F09B9224B8CB
-:101F1000410F576CA99506BB42FD06717D989CAA9E
-:101F20003A60DDD6EDEEA33E07681F19F57BFBBBDB
-:101F30006406CC5FCBE5E7DFF8BC6712D93E86F0DC
-:101F4000FA41C13E23125CB213FBE1929D08E7F413
-:101F500030B88871A3027EBA0E19CCD7310BB84EB7
-:101F6000CF50261F872719D719CAE51F95FB1727BA
-:101F7000A2DCF76540BF97CD6C7FE1EBBA43EBBACB
-:101F800071DDF96CDD4920E781FF5DFB5E10757640
-:101F9000D7A4808780DD033C6C2A0CC97BD9E51768
-:101FA0005B687B7114393F8E9F9FAE330EF6455AA6
-:101FB000181EFDA9EA9550A776C17858BF67A88278
-:101FC000F2F2F54126B29EF2656DFAD0EF83D8D4D5
-:101FD000E6F95522A3879EEC76E72C8A2F3940DC60
-:101FE00016A4F306947BC55CBEB46EF71078EE1DA4
-:101FF0004465A66EBC1C986525363CCA3FBED0FA27
-:10200000533E6A0F0C4DF044C08B56AE5ACC44116F
-:10201000712DC0710BF9B8F07EB68777C5C1FC2B66
-:10202000A1FF370899CAF1430F8CFB9BC479A735F0
-:10203000B03EAE8FF6DB9E3BDBB01F7C4EF9A83D79
-:10204000F78938B097BA33A91E0039F5928872B271
-:10205000DDCEF0D89E5E47F4F66899D32F1E8679C0
-:10206000CECE26D329FE8A9D1E72913DB4EFE2DCCE
-:102070003AAFE0C0F66763E83CDF4EBC08F12EE7FC
-:102080007948A50DE0D249EAE8F965C52FBA695942
-:102090001620FEF105D09FCA7981CDE7B2EBE7218A
-:1020A0009D308FECA6F400E3027EDCCFF6A3E7863A
-:1020B000A32DCF6490DF1A5F52BBEE5EC07FB97272
-:1020C0004D79229DBF714B76BE48E7AF74F6C8B319
-:1020D000F2506EB7029DFC2A456D4BFC5FB4E7667B
-:1020E000109F19F03E218BE981294D826F3D854F6C
-:1020F0007B989DF018E7C7B12179B716F9AB48B3C3
-:1021000013D4C713CF6D07AF83E7E7B0837F06CF44
-:1021100023D8C19B12991DBC19D6A376F09389CC04
-:102120000EFE39AEFF15E1768D42343BB40BE673FB
-:102130002472B9FA7B668F86EFFF1E7EFEE5F4AC53
-:10214000BD4097924F6274CEF8F40ACEA7938E5298
-:102150007EC91B48FFDD94FEBD94FE4E53BB49CCA7
-:102160008E4E4FFE0BE4CB928719DFB73A7721DF13
-:102170003DCFF9B39BAFDF9D2B56033E5F26A222D6
-:102180000A03E76BCFF43841AE87F39F7AD648CF86
-:10219000654EDFEA7CE09B7DB3DDB0AD707E946977
-:1021A000593722B4EFC3C0876374F2890852E5053A
-:1021B000F021CCE319017646A204FCD74AD8BADE56
-:1021C0007D22EA89687C44E9E624E0AF1F2E006C9A
-:1021D000DDFE29DD04804E289F9DFA3AF4B28AD3B1
-:1021E00007F543FE0AF3E4F27A6D14FF4248EAD79A
-:1021F0000F4212F0F74CA687B2135D4847B5C421D1
-:10220000837E51C5CC2C902F745E7312EDFF66C295
-:10221000B9E7B525F5F39F0DFA93BBD8BCAF809114
-:102220003D66E0BC1392A8FD11619E0CBEBF1BA3CE
-:10223000F80B399A7D92D76F9FA4C37A39C037744F
-:10224000FD1D29EA60A86B7C53CCED961705A35EB3
-:10225000BEA4DFDF677A2E8DDB2F644EFFBC390012
-:102260001F0D9E9A1D50CBE583364F2EE7BF614967
-:102270000A1BDFC0C63BA04EDB2BB9FF44E172292D
-:10228000C2DBCA9E9FCF2F7A4061718B3ABE2F2945
-:1022900051D1F41BC2B52A9ADFA584F43FAEE7669C
-:1022A000FD4770F8D07615DBABD93EC62A0CEFE1BE
-:1022B000F18368F8D1E0EFE4E723B96C7EE2ED87C3
-:1022C000DB64985FA39768707B3381C16D9206B71A
-:1022D000363E4F983C5825755A9508E7BC91D3ABCC
-:1022E000568FCB35CA8768F1943121F8D4221C0A65
-:1022F000D8BEA3C5572EE7FDAF4CEA875F038EB368
-:10230000B1FD3EC0E5356D9F87ED196CBE3B42EDDA
-:102310004DD8EE64FDA3F9FD7770FD3537A97FDC5C
-:102320009D38CEC1C685C713B4B299EF6F7E68DC05
-:10233000DD382E878D7386F0BE18DBAB58FBD78D4A
-:10234000BF39F9BADF0DC16515F2BDCACEFFB7843A
-:10235000FEF6EF637B315B379AFCF85B029B6F05FF
-:102360009FEF4AF08BE91C8941922B39C06B8A752B
-:102370004FA05DD282AA1FF447E967B20BE47485CF
-:1023800068F30A541E4B2E2BFAC9311251C1AFED1E
-:10239000F9FC5BCEBE3CACFB41AF2F8B29B182DF99
-:1023A000B93C5B72833E2C794062FEF57113CAFB27
-:1023B0004A713ECEB34BD1ECDCDB0D7EB44B715594
-:1023C000C7C03EAC227131FFBFFA2AFA7C3C97D7D6
-:1023D000BBACC926986F6C268B178C77D5A1BF4EE6
-:1023E000CE323F5AA5FF31F9ADA25E96F93829A346
-:1023F0008508581AFD6D99AC3E258E44BD8076D473
-:10240000D880D1FF965D9547607E99E8C6D175BBAF
-:1024100093EC0EB4A772C8F02F28FF58720562A182
-:10242000FE4585E4F1031E26BAEA94527A1E4B86D5
-:10243000C70A7238C7EC1F0CF184B60CD9ED05360B
-:102440007CA8DC9A0DFE5607F5CF110E6AD2352313
-:102450004278B214AB04E890E204F9ABBFB4B132F5
-:102460002599D1F1F1240BE2B382D7B5E7E1782FBA
-:102470004C8E65728458BD1FE6829C104802A5C32D
-:1024800005A42F0BE8312D9DE98F26535F2AD44FE9
-:102490009240AA8396AD1D525524FFE727DC2F5B9F
-:1024A000618A6C2FFDC43CF17D80830471834B31C4
-:1024B0002EE0B10C0BC50F347B558B2344B35BEF7F
-:1024C000176B8EC13C82E23F03FD07DABF5E76EEFA
-:1024D0000C26A7B552DB472D87CBE0642B9E6FE718
-:1024E000DD6564960BF1F439C7D3BECB002AD973EE
-:1024F00014C0D34BD98FE4405CCA9AFD9003F8B363
-:102500008A30FBB4C205B29890476D9EB3493AFB3E
-:1025100066624E2DDA4DC5592D684F2D8BE2977EA0
-:1025200047C38F4627368F39790CC4BF165A61BC12
-:10253000A4D4C442B93338154B6AF75AE0F9B20C47
-:10254000563F1F1EDEE37229DAFE27805E80784D3B
-:1025500046FF3952607EFADC2BE787CEA1DB5F7A3B
-:1025600072CAC0FD5993993ED2F625E570BACC35B2
-:10257000D25D4D32933397246BFEE205D3DDDB173A
-:102580004277E1E79D98BDA8EA6212DABF765EED78
-:10259000FCF4BCA3E13C15123BFF46C5A3C21414D6
-:1025A000CE05008701E7B246D6FBAE64D397E5A31C
-:1025B0004792865DF879BEC4BCD393BF049CF68C69
-:1025C000539D204FDA52287D523CB509ACD4FADB3A
-:1025D000397D3EC3CB2F2327867F89F39538851716
-:1025E000401F8EF71C2C8365CA8B4781DA017EACB5
-:1025F000073C94E63D20CDA2F5F6BB67A3FCDC3397
-:10260000AE05F7BDCC6EDCAF56A6707C1467A9C8CA
-:102610007F6D9CFF2A08F323B57ECFF37385F347C4
-:10262000F87CE17CFDA84DBD0BF69592CCF61FF22F
-:10263000FF7A45BDFF57CAF5D738EB1D86F8C73876
-:10264000EEFF2DFB6CA8CD4B0F7A9AEAB57F8AFF7F
-:1026500077863E013F29A3D4AAF7FFDAAC65D8BE3E
-:102660002C53ADBAD401FA5874DF4B107EE80F7AC0
-:102670000551D918C11F5C9629FBC7D3E71685FC05
-:1026800014F65746F525C45F2C8A4A2E1A31D02FEE
-:10269000DC652D23103739AD9067C11F3BDF7936DC
-:1026A000271BFD4209FC423E3FFA854A0BE9C378ED
-:1026B0004F1901BB06DA5D2340EEA8C463073D4213
-:1026C000FD429D7C3A6DBD03F93D7C3D2AB79E06D7
-:1026D0007CB5298C8FC3FD413999D9C19A9C0DA72E
-:1026E000870A27A39B18BA7533931BDB9323C8FB78
-:1026F0002F2F9FE694830B703D59B2075CB5EB8298
-:1027000001095C9E6F27337EAAB13DDD06CFB5F986
-:10271000C3F1434FAE423C1DEC1916BFA1F61AB5EA
-:10272000A3CCD45E5B2984D65FC6E11D0D1FCB40D0
-:102730005F47E0A303C9262E7FC2E3447718EF5F0B
-:10274000142F7114B2B83E89007F91DB49CB29BFA9
-:10275000C0FDCD32B3DBA9009D6616BFE3017F3E0D
-:1027600053C6FB0822B538AFB10F3CE772889F45CE
-:10277000D8DF9F939310AED60C93C13E23E41E8303
-:10278000FD18EDDC84EFCBCCCF25003C73F5F00CCD
-:102790003B77B982E706B31EE68D37B9899FF245CC
-:1027A0007C1671A3C08A37611C56E37385F3B92682
-:1027B0000F6C0A1B77B56318B3CF445B40A4E75F87
-:1027C000E5A0F6349DA755DD857A551B9FC0CF6FD8
-:1027D0001BC7E28D36BB5F5122C0E17ECEE7D1CE72
-:1027E000D9A14A89E5747FF72BCCFE96C6996A7CFD
-:1027F000188F62F15A85C34E2C29B082DD3E091C28
-:10280000F814D8CF56451FB712F97EE2EC743FE7B3
-:1028100090932BC2F61393DB570EFB97B2552551BD
-:10282000B7FF0A876607F4227F479BEF3E2EE763D8
-:1028300072DCA40EEC0D9BDB0FF75A316A5D218828
-:10284000C5D85C3799AD6B8F550B475B7474D891C5
-:102850002947BC8FF82F0793FF7649AD81717645E4
-:1028600022704F66E7F672B479A3EDE37CEBDDC42A
-:10287000CF3B603D5764BB62A883C90D69DCD61AA3
-:1028800090D36484448647D013290EC6A7F1729F63
-:102890000BFC754A8F9E48F3890E99C3FB5FC41FDA
-:1028A0009ADD5DD2B56F28DD6FAB4D720B20BF8A0C
-:1028B0008EF6BA74F0A17A7D9643173F106D1E9480
-:1028C0006FA28BDDBB575998BFBD679CF19EAC8151
-:1028D000C3EF7D5E46930BE31D9A3DF6AF39E79754
-:1028E000C55F05E04E07970E800B01FEFA415B6B5A
-:1028F000047949E1D3FE55E0B39AC3E5694ED7D1D7
-:10290000E033CA61FA97D241387CCEC7D7213EF373
-:10291000914311E0D86A97D3671BF8BF03ED904845
-:10292000FDEA74E78DC6871A7DDCC4F14205A42157
-:102930002E203BBCBDCCAFBCD3A8E7C4F96E2E9F04
-:10294000C9590AB744DE3FD146FC71F1A1F9E572DD
-:10295000633CE179078F0BC4901880CF69F754016D
-:10296000F2142CA699A394A1B04487007A2215E60C
-:102970001949C8035C7E86EBC11495F9C983498B5C
-:10298000C0F44A06EECFC1F711AE07D3A95F03F139
-:10299000183822F8D38369DD0A360851F11E5CF03D
-:1029A0009AD05F76129F00F367903E2C87402A02F0
-:1029B0009D3F9BF40A39147F0F54D48D02F9FD0E0C
-:1029C0009CE392D039CE678F6AA5667FACFE37C193
-:1029D000FB93B07DFE1F82F792321DBCE51423DD10
-:1029E0007C597837707887C7F38A219E970DF13C20
-:1029F000FF6EE053F92CB33F7AFE2E637CAF2D9B24
-:102A0000C5F32AC4EA35780FEA92D1FD9072FB56DD
-:102A1000419E936677A2CE1B168AFB594FFD4082DA
-:102A2000380A918E229CF06EC885F22C3B05E53168
-:102A3000B323C6F3FDCBD973AC70EF1DF29FFC221C
-:102A4000B33798BD24733A287696A2FFD276F6DC87
-:102A500076C785FA493BA53D787FADF947AD8159E9
-:102A6000E82F858FF34BFEF7E0FCFE80EC827C9331
-:102A70006E7E2FD67D6AAF214E1BEE076976D57824
-:102A8000BEFFB28067DFA570BFA5CC222CBEC9E017
-:102A900020F375DA9CA7F11EFCF9B326F4B74E7348
-:102AA0007FAB18FC2C3BF377EAEC03CF794DCA459A
-:102AB0008638BCE63FC138C8AB2B53FC22D8739A8A
-:102AC000FF04ED2EFB40FFA9CA127805F637E51585
-:102AD00011F342A2C137DC6F0AD73F335398FEF996
-:102AE000560A8F1784C1538BF785DF4BB76BFC27D2
-:102AF00079053DFF87AF2FEF9A88FB278A2E1E3B73
-:102B000034144F14542FB92B3F143F8C10376C01E1
-:102B10003AD4E2869A1ED3E8D842FB5AF19E397223
-:102B20003CB13B7BEF30E617BE900CFC59A1B0B82E
-:102B300091B63FEA17DE93A2C3477180E96DCB7F60
-:102B4000B5F42DA1F02549C4CDFC83169795D62B5D
-:102B50001592BC12F9CC86795AC50E01F94EF2C70E
-:102B600060BDF2B8DB1743EB965D2F89A203D69BBD
-:102B700045628410FD68791D6D810F5601FE4E1F60
-:102B800097DCE7F2BB2B218866F0936243F844F9A7
-:102B90009664A83F22791E4D413B6150689C08F91C
-:102BA00060430DF967CF48EA63D06FBA55FD11F65F
-:102BB000FFCFC3FB2F53305EBCF72BE13DB40ED3E8
-:102BC0000760B39174DD7A36DA7839ACE342FAEF14
-:102BD0008F4B2F22781FB309700671964F880FE232
-:102BE0002CCF995F14411FB5F379AE201D2E7918B3
-:102BF000DB2FF4DBBCD1B90EE8E2AD946C9CEF396D
-:102C00009B67F528DABE6F83340AE236ADAE67AC57
-:102C1000903FBB6B637B469F8EFFF66DF60C89E49D
-:102C20001F6A25FD4B3015E1B9E259A98A2627B65E
-:102C30008B501F609F6DE852609DCD1BAD3322C548
-:102C400035E454C6EF576C60766D55AEC90DE2ADF4
-:102C50009878A524B88F7113B79F36C48DD8DA5BE6
-:102C60000ABA285BC47B0D5ADF1D4FEB716354F425
-:102C70000F2E1EB115C75FFC49A99BE5517A6DF96E
-:102C8000B4BE2AB774CC4A5A1F12EB39067C45F5FC
-:102C90004C8784FAB4330EF200E2464C4D59496B2E
-:102CA0007102A98964E7FE3D85D9799BCD1A5C251F
-:102CB000CC83DCB55146FEDA972EE2FD1385DB7C32
-:102CC000A8FF393D8E504A24E5AAB71CE058413A86
-:102CD0005BC19F2A775DF3423CF90AF02BD8AA002A
-:102CE000FFAF8A6287BFC5F7874284D2CFDE0D6D02
-:102CF00037920879D4FD79D671AA2515EE57F8BD1B
-:102D00002E714E45FA898EEF7B99BFD9E96F8DA55B
-:102D100070BC624BC720FDFCEF42D0356520BE2160
-:102D2000FF995C0AF9B71ECCA76D3D6A42F8BD9CBD
-:102D300027F8040A9FBDB922B5D9E8AE72ACBEE14E
-:102D4000B4BE9AD371F596FD6D8380E5531DB8EE40
-:102D5000CBB94F58597EEB85C7AF47533E6884FBCC
-:102D6000648A8F094AACCF45F1350FA6A0F5718A68
-:102D7000D5E7A7EBF5D87BCB12E812CFA508EEF587
-:102D8000402FB94401F9812E8889214AA175101973
-:102D9000484F0E82F95CAB0AF3D6435C6C6586AB98
-:102DA00013F20D778CB062BE59783EF10EA1E58525
-:102DB00044884B250A28AFF7E6BE89F7747B332C8D
-:102DC00004E815137EE9F3B624C6A7710546FBB3E4
-:102DD0002A359BFB9FC46B290CED2B2EC7AAC6502E
-:102DE000427A31918DDF9723F880DEF6B9B87CA066
-:102DF000E7DD080691D4214D1F111DAF2F0D9FE077
-:102E0000D2EC62413BA769E0399E137CCB87C23983
-:102E10002EA6E7A0757BAE80EBDB9595B7132C8BC8
-:102E2000EAE11E337CFFF7A632FF50A664970BF24F
-:102E3000AD73F9447D7E8C5C74FB145B3CE631A180
-:102E40005D99962BE079261E65F7B903F2B315E27A
-:102E5000910DF8A156476A68BEB8CF9EFD36E4FFD3
-:102E60004E2E12FC31B01F9EDF4CFFAF07F48B9C3F
-:102E700053CBF2AF73D7E179261599DD709733C93B
-:102E8000E6EB28A5F5978E4918CF9E9C3301F3AB4E
-:102E9000C3D75FA9107F1585EF4B7912C23BE6A21D
-:102EA00027709ED7F34C286F26433E36E42FEBF372
-:102EB000AA511F1AF3B9278BFFAD9640B39BF12B94
-:102EC00091BC8340BE4F711AE1673F6ABC2FAE2EA2
-:102ED000B018EA93F3E4303DEC457A793193D1C5EB
-:102EE0008B170BBEF5D9213A9B7434C90774067F42
-:102EF00062A1018E8673C6056415E0B7EFE29F3DBF
-:102F000008F72471AE65B7E33D3887BF4627711CCB
-:102F1000EFF68C5F7F1BF49406FF703AB870FC5F8D
-:102F2000535302F82FD0EEEFC3F01F866F8C416A27
-:102F3000E7183610EFB87EF6407C6B7430E0DCF7B3
-:102F4000752D1F4AF1FAB29D3E003CAF937DF70A02
-:102F5000213C9D17AF392548372B950E1BC8FD988E
-:102F60008B0ED9C03FD0E88288DD057A7BFF9F8534
-:102F7000EFD2D5027326DD820FE27A6FC0A3CB4376
-:102F8000EBBC98DA9FD7F5622AD855352C8FA3551C
-:102F9000CD67EF5D15307D1A2E1FFE902AE2B81E18
-:102FA000F38B19E7CA53ADB67908DC8FB542BE1D65
-:102FB0003D9FBCBA16DE6820F2B45A949764B5C03F
-:102FC000F2108A7F8BF27D8ED3B75488B01E5A32AE
-:102FD000B84F17937BC5C9D89FCCD0F2926ADEC791
-:102FE000FD4F63F50BDDD76BFFA47DFD9ED20A8BF1
-:102FF0007731BBF96A1E97D7ECEE2936967738A55C
-:1030000058447CBCBE41F0617E24EDE7A574D2C873
-:10301000C9F66A6E079E2E7AA67D940BEC41D560A8
-:10302000770AC53D68F7251419FDC14435D680FFE0
-:10303000E4AA24433DA56690A17FDA8CA1C6B8829C
-:10304000E79B86E7831BF20DF5CC962B0CFD87DC06
-:10305000556AA8677B2719FA0F5B3ED5501FDE71B2
-:10306000A3A1FF37D6CC323CBFD8D768787EC9A69B
-:103070008586FA88CEEF1AFA5FBAED5EC3F351FE89
-:103080009586E7A3F7FDC0501FD3FB98A1FF65EF1E
-:10309000AC373CBFBCEF49C3F3B147B71AEAE30210
-:1030A000DB0DFDC7077719EA25E41543FF32EB6F07
-:1030B0000DF50AE53D43FF09CE4386E7135D1F1B6F
-:1030C0009E6B743039F75343FB55EEBF85BDA75354
-:1030D000C3E21C100F18068F3AB08C259DEC5E875A
-:1030E000F462F960A1A73C0DE8F3C7DE7648486AB0
-:1030F000F506FE0857D3AF170D4B60F6934AF4F26E
-:1031000053CB4FA57E8B378692427C90D2ED684A96
-:103110007741014B2548256B32C47B62B04C0A26AF
-:10312000637B7230114B477030B6A704D3B14C0D9E
-:103130000EC3322D988DA533780996E9C18BB11C49
-:10314000141C8DE30607476199111C8BED99C1CBC7
-:10315000B1CC0A9661FB90600996AEE0642CB38313
-:1031600013B11C1ABC16FB0D0B5E83654EF0266C6A
-:103170001F1EBC01CB8B82B3B1FC46B016CBDCE08A
-:103180003C2C2F0ECEC5F29BC13B70DC25C1DBB1C0
-:10319000CC0B7E0FDB4704BF83E5C8602B969706F8
-:1031A0009760E90EAEC27EA3822BB0CC0F3E88EDB5
-:1031B000A3830F605910FC11B68F093E8A6561F038
-:1031C000092C2F0BAEC3B228F8732C2F0F6EC6F24A
-:1031D0008AE033386E6CF0692C8B83CF61FBB8E0EA
-:1031E0006FB0BC32B81BDBC7077BB05483AF607BCA
-:1031F00049F0252C4B83BFC5F6B2E07E2CCB83EF84
-:10320000617B45F05D2C2B8387B09C103C88655515
-:10321000F0632C27068F613929F8298E9B1C3C8589
-:103220006575F06FD87E55F00C96FDF22E6ABEB231
-:10323000C784FE2CF753A3FB0B5E949766FE5E1CBF
-:10324000E45663FE7F8BE0C378A1A3EF05A89B8BB8
-:103250002C182FBC9904F03D813F903E3BC8D39E73
-:10326000CB8F6440BCE9F5147FA63EDFC1CCE30000
-:1032700015E27109FCD5298E5D29A04F6FA6CD906E
-:103280006744D42F300F720ACF83BC59A20E16DDCB
-:10329000EA7E98E172ECE7B7D0FACC6AA2E6D3FEF8
-:1032A000ED975B30AEDF9E4FFD205ADE97CDF26585
-:1032B000BBD298BE7C2A8DF9A5CFA531FFEAC942C1
-:1032C00096C733F3F6E18C9FCA93CFE33731387C4E
-:1032D0006324CFB3B505B2303FF602C79D48E57908
-:1032E000B5BCFF836935CFA7D1766F29C96DB1858C
-:1032F000FAD1F65D51DAF7803C086FDF6562F8F0CD
-:10330000BE2D723FA12661EA39FC84D717F77EF300
-:1033100085E1A1FA1B51FC504296B0FBC35DC7AAE0
-:10332000AFA7FAF0EA22D14D2507F9EFC5DBC67D3C
-:10333000389CAD0BF999DE5211E317338BF7EF4947
-:10334000A6F5998B1231EFBE7F5FA5667C3EC5F96D
-:10335000F6375FA047BFB9E537E33E34C4453D6863
-:1033600077DDC16994A8E6BFF669CF915E59DCF7B5
-:103370000E58DC05F2CF8CF3F6AA66DFB9F263884B
-:103380006A21AA81EE19BC56C1FEC1F7275613ACBB
-:103390001BCFFB50B8A2DEF7C6CBBE56019C7757B9
-:1033A00002D05D5C5E809C2BBE0CF0943051A1CFAE
-:1033B00006764C3478A63819FD2514AB4E2FC54F30
-:1033C000DBDF45BCE7DA9D58A800FD7FDF9693065A
-:1033D000FCE174327A6DEB7917E35B090501E2B524
-:1033E000B1FB739705E2F8562C972E7663D9B6B8E1
-:1033F00008CB95193FB042BC444C91201398C4644B
-:10340000CEC17890B6BE397196B5C44DE75B63A95D
-:103410008610920871066A2224D2FA12EA539C4D51
-:103420006374FDBAF3431BF0C3D93417D64513BBFD
-:10343000378E2BF0AB909710E7564A2557A81DFF03
-:103440001CD8BE1EFC91D749DFEA6B018E2A7B1F78
-:10345000A395BF6FDA5A329CC3551B1786F7303CD1
-:103460008BB21BEFADC558DA3F2F3A5EF39C2C2F81
-:1034700001E84BA2F4F529DF3751E34C309F86DF9A
-:10348000D35200F3A95A85C87997851ADC155539A6
-:10349000D73D0A51A4BFEAE5A92D6F5B183DDB506B
-:1034A000BE621DF2B9B8BCDA9BA6163BE9FC8BAE36
-:1034B000E472202309E5006D9F7E056DDF66627E64
-:1034C0008A3749467EA14048803C5F6275254C3D65
-:1034D000471EC4B2C58A2A99E17EC09500F05AC63B
-:1034E000F3F5E00D65BD1CF857F50BC90B1F9E2BBE
-:1034F000BCFF3613E7ABD8183C97C8E1A18D9BEF12
-:10350000E4F238BBA6D689F1115706C8555A9FED8B
-:103510001C83E7CF00BEA2F5DBB0AEF4D7EBB1BFA2
-:1035200093F5C7449A0B90C3745C138E93FAE769C2
-:10353000C1BAAD7FDD85B88EA3BFBE08EB19ACFF65
-:1035400085AEA395FDE77F93C9C9CF24352189C2F4
-:10355000A7E6AED935E5546F5F7BD75C2C3F58DCCE
-:10356000AB825C3D4CE5491B856B4DC93007F83992
-:10357000D75E35CCE6D2D16B3D8F6BEE5A6EAE0284
-:103580007D57BA42ACD980FCB4C49037B7CA69E65B
-:10359000FE0DDB471DE5F1BB29C9D5AFD9FFCD36FF
-:1035A0009D3D3A8BB865A0F7D9CBCD21BA263AFE1E
-:1035B0005458DB3693E7FB37C039568AFCBE82F39A
-:1035C0006B22E1FEBC2BB5E61C7A872CB7104F04AA
-:1035D000793C103E84FC95F2C167B61C8CCB524BF3
-:1035E000CD1A695E0D4ED1D6AB8F12FFD5E0A4C1C6
-:1035F0005B6B3FB47AB4C2EC6A9F018EB3EF1B835E
-:10360000F1CA7A1EAF278956CE9FAC5F1D5D672B2E
-:103610008C935417D03BD423C9176DDD3AFAAFBB56
-:10362000F323C197C361A599E9F130F81E5E333CDD
-:103630001EF45038FE2E14CECD1682EF530436DA27
-:10364000591CC93103E76FE0EB13C74CDC4F035F34
-:10365000EF859D717E13ED5FBAD1BE1EFCE093A590
-:10366000DE476A403EAD37633EDBBD3B57BDFD23C1
-:1036700078EF639D19EF4CE6C63D5C08F7B1A7B83B
-:103680009EA30AA007BE9FE021DA9F2AC0FCF58412
-:10369000CD7F52BBFFD89880F03C5ABEA17D2C2D27
-:1036A000FB762CA886B8CB919D57ED05BF796E2C83
-:1036B00091D231BEAFC8C87F5EF38746FB400AD5C2
-:1036C000C581F57AA8EBE247737DE60FF5743E6F8E
-:1036D00093B1AE8797490F2F57B9115EAE0A03BC5D
-:1036E00084E7ED7E5107AFF298E10ED0EBEF3A5D43
-:1036F000088F8698A5A9009F861D2BB09CB729C668
-:10370000FBA16EDD059D89867AF3B674AF5EAF9C32
-:10371000DEF7443CD0E142A7E8FD90EAB9E38BD55F
-:1037200056B0634E2CAEC252C3FF82CE6CAFCD30CA
-:103730008FB17EBA43A862F2D99530ED1CFCBAD0A5
-:1037400029E33A1F6D62FEE6478BAD5E58E7F862EB
-:10375000C5CBD6757A991DC5E035FFAE38EF87A386
-:1037600043FB8B36EF3F7B7FD4C22787AC04DFD986
-:10377000F9E21C7A3BAA5C923E93517F749BFF0C4A
-:103780007463A5FFFB02E3A812D6B5799B3B452FD6
-:10379000E41313B2C5B01E1DE73AACE3B7E87AC133
-:1037A000F89D8971100B43F9CCEE413C700F42E754
-:1037B0003B29D996431C41BB0769868568DF05D63E
-:1037C0003ED9439B3EE91A76CEF7CC299EB2412FD3
-:1037D00037583B6450B60D9D1797033F7DD2D59A5D
-:1037E0000AF2639E78FA5B91DEF7BA3E9DDFCFFB6B
-:1037F000CC01A3BFE8D3F6992D19F88CD8FACF4D98
-:10380000EBC7A3BCDF53CBE76DDAB2BF722CDD7F11
-:10381000D3B65332EC232DDD539B9E123ABFC0EF3B
-:10382000811A371D94E17C47CDDE8BBE772EFB7E5F
-:10383000C03E6D4E43DEA197F4027FCE2A221AC30A
-:103840005EFF1E9537C75E3113B83F2467692FFAB4
-:103850003C8B3F9D436AE2015EB3BAE6A1FC39F6B8
-:10386000ECE4BD2CFFA8A310E8E31362C2F7DC3F31
-:10387000216FC68FD6C16F75BA963FC9BE6FA3E5DB
-:10388000B7D00DA6637E7A437B2FBC376621929713
-:10389000CB25817DAFC627A03C6B60ED5E625D826B
-:1038A000E758CEE49197FE07F5DB3A8CF2A97E8DBE
-:1038B000B15E47A6A6427E77DD4366C8202273F537
-:1038C000F28FC2EF8E7466D7D7939676B0E71E97C5
-:1038D000595EF72C854883A91E5AF0EBC70B6B691C
-:1038E000FDC17476BFF311F733E0BDC774FABCF1C4
-:1038F0002E9FACE60D3CDFA1AED1D3C7129C8FE961
-:10390000AD46CD6E252E88E30F867F0D8D7EFEC1E0
-:103910005D22DE3B0D86769D7C9EBDDC78BEF39DF0
-:103920003FFCBC84FC00CFDBB8E91AF4DBB4F368DD
-:10393000F8D2CE63DE14F93DDF27D30583DDB49DD5
-:10394000C34FF3BB9F0FABBF10567F299DD9F72103
-:103950003F9DD1B799F337A5FBE781EE1758039543
-:103960008C4EFA64FD7DA81CEAF7C2B9FA5938BF3B
-:10397000D07E2FA58F89DE2F2634DFEB91E65BF01A
-:10398000EBA79E057FB4F1970FC7C365D031A9237C
-:1039900015DEB398BF71693CC0E9A8E48D07BA3958
-:1039A000E613AB22C14B1AC4E506516D02C57B93E9
-:1039B00046FFC54BA6807EFFF346B3027E61F32629
-:1039C0008B1FBEBFD4D43517EF6B68FD20AB2FC360
-:1039D000F72A9BB7993FD0E3B5F1670FA7627E073F
-:1039E000F10E66F7E9FEC1F0E9A0A60D7FAA043F3B
-:1039F000B99904909EC3C7C1FAC12494D7B572C2C5
-:103A0000C0E75ADCB4993591E6AE55A7206EDADCF2
-:103A100035F108F07D33913ED0D35303D034F557C0
-:103A20003E4FE779779791CB40BE68F020BE149463
-:103A3000CFAD9B7F38F220DDCFF10DAFC40B7A7F85
-:103A400095DFB79FEE9CFD7EF239F4C3094AA7FAD1
-:103A5000F73134B9EBDA46379046ABDDAC9C6FF604
-:103A6000C78FA5709DBFCE8CEF87CE7FEA899F3E22
-:103A7000067944EF5AF0FE63DE537BDEBE82D6E762
-:103A80003D6D7654B363D8E03E58C34B33FD1FDC25
-:103A90004F6878687C668F0CEFCF403BF8071A3E82
-:103AA000E63DDD23931103E157D6D923F7D922E070
-:103AB000A5F36025BE67B4F92F32E0FDD84E81A48E
-:103AC000650F1CDFB06E0FDA310027C423C7533FE8
-:103AD000DE06E0CB3F657B01F653406E9F0F5F072C
-:103AE00040AFA6205DFF623BDD47C3EF2D6E8043F4
-:103AF000C32FEE8887F31C915A187D3FBE3415F210
-:103B0000DC1ACCDE54054BD6DEF0E33B91EEEAF74F
-:103B1000DF99CAF20ED5749EDF910EE7BC6DED758C
-:103B200078CE3AE241FA6B785CAC813C98CF255272
-:103B3000F57404FEB89BF3C791F514B9F49C4740A3
-:103B40005E3A42FE8EF65EF39DFD7110760FF939F6
-:103B5000BF879C3A48CB5B67F2B79F6E372C43B95F
-:103B6000FA51A69A06F793140E9A1C45F92AEEAF5D
-:103B700048637862F218C751FA2B8376E8DF6BC688
-:103B80007B61DD382E3FD9FA8BF8FA74DFB1608F94
-:103B90001C498DFC3ED0A67EFEA7FA5647673A3EEA
-:103BA000677CBF6105E3738DEF7DD754C1F3CF7E92
-:103BB000C7F808C6813EA2FBF2A7E1F39E6902CADC
-:103BC000050BF147E2EF0D66CEDFC6E7D462477B17
-:103BD0004EA313BA7F09BE4716A217BA4E12E201CE
-:103BE000ED95BA87E8789D9DDD0CEB623F39D49E58
-:103BF0001DE2E37A2E0FBE3DC8280FC8DA940B8A67
-:103C00000BCC37FB7EFA18F02FE557AF0BF8D78CAB
-:103C1000EFDD7CBC65F7DB37523AFFB853E35BA3BB
-:103C20003C0DE7DB86AD77627C309C6F3FCE682130
-:103C300011F93683BF3717CEB7197DFF5679AAC160
-:103C4000EF2761F0A3F2F127DB5DD1E1182E1FC74A
-:103C50000E72213CC3E523FDFB1D291C48871AFD7C
-:103C60006974D7F8F30543400EF5D3A7467FFDF4FA
-:103C7000A9D15FF8798DF01B20DF20D949673F98E3
-:103C8000EF255E3BC577608788DF4B3AE90AC4437E
-:103C9000FC67690CB915ECF0930AAF27B27A20459E
-:103CA0006E0739A1B5076258BCF2644D203E5167DA
-:103CB0005F1FEC16E321BEDBE78BFC7D37CC48A40D
-:103CC000EBF745F9FE9B168F38191B3F12D78BCDAA
-:103CD000F201BE2A445BD65D9037DA21E2777CE6BA
-:103CE0002CB93E1EF2434E760FBB7A066DBFED2512
-:103CF000FE193FAF2AA55338CFE6783F4ABC8F1450
-:103D0000D3F3CDEE66F6F39CD591E944BB37AFB360
-:103D10002D92411E51BB35441F049EB3EF2C34AC91
-:103D20000D6BEF9E8CF4D418464F1EEE1F1D1BC466
-:103D3000F3FB479151DC3F31E9F3412AC4BCABE1CD
-:103D4000BB9C27F789986F7DBA5B24ED70CE2D82DE
-:103D50008F007F7B53902E9BA8FCD0C77F8F03DD05
-:103D60009DE33DBAE3BFFA43E1F76897F9CFBE3769
-:103D7000F247B43CFEECBB173D07F55F1FC87A8FD6
-:103D80000CEC5FB6F3CC2D20FF4FEEB4108CABECF7
-:103D90007C31EB7B50DF6EC1BCA393F75A54B4A7C0
-:103DA00077DA318FEE64268BA7B6EEF8CB48CCDB02
-:103DB000266D8837C760E6779CEEFEDB1FF1FDDAE3
-:103DC0006E7A2AD0B73BE3D01E6FDE1EE30327F5E1
-:103DD000E48EBF14EAEF2FBEEE799A6416BF3F69F6
-:103DE000273320EE753291C5AD9B9FBBFC892574AE
-:103DF000FD055D3D32BCB753F6FCDF4782BC39B9E7
-:103E000095D91127CC7D3F266E42860CBEE73E3306
-:103E1000C5D709B0ED28AF3C3778E755DEBC487010
-:103E200061703849E100E7A270690039190D1E85FB
-:103E3000FFB1F038750BAC3FBFFB32BC7F08C1450A
-:103E40005059BBDD6715F0FCAC7DE75F46823CFE58
-:103E5000B87309EAF7F39DFBBAFFE7CE2DF82FE41C
-:103E6000DC8BFE63CFCDE8FFAFA09FC60CE483815F
-:103E700074FEEB6F61FD177637EEF702F9FF21381C
-:103E80007FCA7FE2F9BF22DEB70A98BF723EBC3F0D
-:103E9000F31F7BEEF3E1FD258E77BB0279122777C6
-:103EA000FC3D8BE8CE7FBE73BFF97F94DE353BA827
-:103EB000D7D4A214D0FDBD4B3AAECBA6E51BEAA7E2
-:103EC0000E705B2D51EE694C19CCAFB0082CEF9BF6
-:103ED0005C2768F1A55E43DE534603DA1B53D4FB2F
-:103EE000D8F799A4965EC83BED2D9DED5E893DF215
-:103EF000F17B02BDD3C6F1BAD1DF7A5D20AA40EDD5
-:103F0000DB29A593F781BD77B52AA23D484BB403C1
-:103F1000DFCAAA64ED45463FE38630FFE0FA19C6E2
-:103F2000E7D7F1F9A693854A0185D7F40C49F151F9
-:103F300010DD50D26286F3DC70B3403A74F1CDEB01
-:103F4000C2E6FB2304D07476E497855F413FFC16FC
-:103F5000223C4889766F771EF81106EFDE69A35878
-:103F60007EB1E466F09BBEC08D7153EE879AF978FE
-:103F7000B36D792FF0AD9918FD4FCD8F8C0667C2C8
-:103F8000FD529C676808EE665544BF54371FC24314
-:103F9000C3C797C58386BFAF8B0F398318EE75B53E
-:103FA00072AEB5761EDC435821DF9DCE7BF56AF6F6
-:103FB000FE88354F4038D61499F1FDAD3F996A0A15
-:103FC000C170AE1E7D59D377D9B46E80CF5C0EC759
-:103FD0003AD282762739FBC517C58578FB8776EB01
-:103FE0005C9590ABA85F52572CF863E9F9EB25E29A
-:103FF0004DC88738A8403ED0C7417DC63AFC5D9980
-:104000001A9AE77CFDA3C9877F76F93E95471F5032
-:10401000A41F8412F366D8EF5D68FEE3ADDD0C8E5D
-:10402000CDF305DF50A423BF597FFFBB3983C5679C
-:10403000DFBF7B34CAB992FB472430BFB600F379A7
-:104040009AB9BD7FDAEB4A8078CEE9EE610910AF0C
-:1040500039BDAF2C3E521ECF7EEE57FE76B115CB4A
-:1040600093E542879880EF9D4C413D5C1E4340EEB6
-:10407000848F5B91A1C5655AD8BD246179F875FC20
-:104080001CF5746842920E6FABAF3A268D1C880700
-:10409000F8FB4077AFF275E10B7E2CC0757F4C5F6B
-:1040A00065A4EF13FE88CB85EA5D6764881F4CED3D
-:1040B000CEC6EF4B4E2D37BE07F86006F7CF4793BD
-:1040C000D1B0AFEA5D13E32F07BCEC13DD3114BEB2
-:1040D000CDDDA7644F84FBB97078C2FC10473E6405
-:1040E00076D7013C0FDD1783EFFFBFC6EF8BF2F8E9
-:1040F0007721E1D341103FDBC0E17A2683C5D1AF00
-:10410000AD2E31A7D075F3BA945190573688F73F4A
-:1041100093E1C2E783F938ADDFA0F9ACDF4159691B
-:104120008A74FE21598C7EEA89FB5B45C27F1EDEC4
-:104130004AEEB7FBE1BDB8D3E5027F6F269CAE091E
-:10414000F2C7E92AC107FA17FC58AC570BA8FF5F62
-:10415000D3F2EEA6327DA9D17D389CF767980C7911
-:104160000EA738DCDFE6F4A1C159836FF87EB5FEF7
-:10417000545E8DD7C75BAEDE36EA17609F34750B91
-:104180008A894ED524F5C9C087CDDB1E30C3FDC258
-:104190000DFCF759885433527FBF7B2683FDCECB6D
-:1041A000EEFCB1683F7EBA9AD9C7EA9C53F160072A
-:1041B000BD6672BF3116F8F175D1F05DF3F0F2BD56
-:1041C000C54A63B9593F6F36EEF3DAF92566080F31
-:1041D000DD34BFC79CA6A3A73319EC7B415AFBA0D3
-:1041E000F92ECC5FA4EBE13EBCDFB710C8C7C8EB2B
-:1041F000EC2D8DA3CF6F6A496474D8D0D923639D09
-:104200007D67585B4F5B279C9FA655C719EAB3CBC8
-:10421000FA32002ED516FF2277043A7D2853BB8749
-:10422000FA927A42A5743BF2FF073D71AA32D27727
-:1042300050676732FAD5E987B448FA61E112571A34
-:10424000C07FE18E6169C01C0B5FAA488DA41FDE90
-:104250005ACCEE0F0FF0BCCB93D3A87EB854A71F57
-:10426000A6C5207D848FBB2AF302F58386AF7FB37A
-:104270009C790BF44304BEF6641AF5C3F4EE5AD4E9
-:104280000FD3A789C4A58BC75D9F793EFD50927A55
-:1042900003D6CDEEB80874F316F74B00AE50C23A11
-:1042A000A027EECF64723F5C5F4493E7395902BFA9
-:1042B000DF3E8F3CFF5F82B326CF175EC7DEE31F72
-:1042C000488704E5F5C21B04FCFD92853B983C5FE2
-:1042D00078338F4B86C9D71A90AF057AF9CAC6379B
-:1042E00079983E68DE96FDC399F4F98D1D66B79501
-:1042F000F6BF31246F0BF5F2F6FE4C49837396122C
-:1043000001BF3366C61197515EE5809C3A34EAC519
-:10431000BC6780EE5F63EF99FD89EBF15747BD58AD
-:1043200000F1F4C37CDE67B9FC3AB1983496533897
-:1043300094CD61F6F0822D22C2A1A98BD9794D9B33
-:10434000047C9FB732FF0CDE1BCEDBC1EE0DE17BA0
-:10435000BE253A3CCE7BADAF7D303C5F27E0BD67EC
-:104360009D7B1E7BEF6F0D8B135BE97F902FB1223E
-:10437000367E3DC13C1D15E3CD0B38DCAA2D81BD39
-:1043800030BEFA67827B1DCA35637C7A41CEA46356
-:10439000E01FCCDB14D6EE5E81F7190B20EEACF3F8
-:1043A00047DEE2E7BB4DF4E73D0379816F88117F7B
-:1043B000EFECAD7038347C4D38ECA77028F8EA701B
-:1043C00068EE7E00F36FBEEEF90F64F2787B3E2953
-:1043D000007EF9934945FEF7BE2CE27BC5731E189B
-:1043E0009EA6CF53FA1387C36B264F7B3AF46B62BA
-:1043F000EF1FD7AF7D7A0FBC1A3EB3938C82B07D8E
-:10440000FD1AA39EECD7CB5D2ED4BB335B9E16E08A
-:104410007BFEB789047F076C76BEC503F7AFFB63ED
-:104420000228CF343A4CC892D877DCB8BD776850B0
-:10443000A01CFD8A6D82827C02DFD3803AC5037C9A
-:104440004F63F7E57FA9E470C7F84CF33686A7669B
-:104450008A17E0B34A6AEF821EB989EA1DBC2FEBC6
-:10446000EE3143FF06DA2F19E58E1BFD5D4D3FC18E
-:10447000FD5D49AA0E6F3B0E32FADD28B84904BC37
-:10448000E5D2FFCE85B768F8D2EC870BC59B068FC7
-:10449000842C23FEF6C7F4568FC67B2AF63B40A435
-:1044A0003B11EF553EEC188678CCE472369CBEC1C9
-:1044B000DE77E9E24BD7C0C6F1C3F531982787EB29
-:1044C0000E65F6905EBE84FBD1CDA417ED9AB47450
-:1044D000CF5319BABCB0E93C7FA5FF5E37D4AF3EDD
-:1044E000734CF47EC4598AF73F5A7E2DFC7214E651
-:1044F00083F1FAEECCC20333E9793F5D2EE2FBC9CA
-:10450000D79B5C6F17031FAF3413A0CB4F5F35AB46
-:10451000CC0E8D43395CFBDA213384466A21BF809F
-:10452000F6ABBD87C9DB4330196DFB3DD5632A7CF3
-:10453000B784748E81BCFD69EE9E0AC8DBBEAE6096
-:10454000FF52B8A7BBB64C79FB6D80EF0A91007C97
-:104550003F585E86FECA1DB70B48D7EF2CC6DFC298
-:1045600022D74DCB7EFB6DBAEECDCB53F09E6DA620
-:10457000BAA702E86DF6D5761BDCD34DCE15894778
-:1045800007C79B49EF5290DF335B6EBF0EF6DB40EF
-:10459000F502C45D1BBAF757A4417DAD80BFA3D619
-:1045A000ECF5C8F00A54EF9A5332C43FEA683F4032
-:1045B0004FF35AD6AF798380EFF7D451F900E7ABC8
-:1045C000DB20107891A497DA7F5636AF0F3ECCD41B
-:1045D000BB968EA7F57A180FF36E48C4DFBB6B7ECF
-:1045E00095BD1F5457B4642FC8A73A3A8E3E26BDD6
-:1045F0001B6EC7F9E6AE1508A4063714657FBF0821
-:10460000E67BD58CDF0539D0F3A80CFBBE85AE97D1
-:104610004EE79F2DF655609EF5F70405F3A0ABBF5E
-:104620008B783BC9F980647C87F199C0EBDC2ED490
-:10463000F4E3C6ACA12CCFFAAE25ED70AE3E6F4AC6
-:1046400036B844CDDB4EC960E77DB8183E3C43F137
-:10465000C6F3E0767B0FC97D3A39B52B6B188E9F78
-:10466000B3AD04F9FC365283F7E29E254C2F1F5C54
-:104670001AE313C01E312BA837772FFDC62370FE17
-:10468000134F99F1BEF444661FC6678FAC35E377CC
-:10469000435AD78A28478E6C617121F1F1EB2AD3F6
-:1046A000017E540E00DDED5E5B26833C3CE2137020
-:1046B0007CD9E377A6B2B8AF517ED4B91A515E3C2B
-:1046C0001EC3E443FD9AC8F7AB51E5C5A24A26DFF5
-:1046D000C3E4C1828C768CFB85CB89666263F65D10
-:1046E0003EC9877AAF3F1DE9B7E9553301FBAE49B3
-:1046F000526E5903743333066E92295FF8F7807C4B
-:10470000FBD427B8BCF4F94DB7FE660CC0EF30C03F
-:104710001BF8627532DEAFD6F96A11AE5A3E62FD01
-:104720001A233D6B794F3778C4D07B3EF47F373501
-:10473000C41155D7EFC03D942EE97AB76E137CF0C3
-:10474000FDA303F71CDC7B6701D615A0C3A6BBB88D
-:104750005E5D6D47BA3DF09D534B812E6FB95BC0D6
-:10476000FD13AFA71DF44AD31AC10571CDFABBD909
-:10477000F87A3A1EE8E5C0A38C7E281DBB80CE9B4C
-:10478000D63EB017FB6F105C30FF8175B5A8871B54
-:10479000BC22C1E71B0EA2BD4CF501E60DEDF68A69
-:1047A000A940E74D6D1605F0AAD18B467F07F9F7B2
-:1047B000A789D53DF25AF87D8A2C5744BA1367640D
-:1047C000237D356F3123BD347B193D1D7C4A443A2E
-:1047D000DCBDF4FA4AA09F131B8528F447E9AB20FF
-:1047E000445FE2E3661C5FBF99C51776AF65747DD1
-:1047F000A48BD9A7658F0F47BFA6FE353361F1079C
-:1048000062D3DB1FE7A3C370BA1BA097381D46A372
-:104810003B8FB9733AE41FD4FE82EEDF15825759FD
-:10482000FB77300E50D67E039E57E31F78AF05F21C
-:1048300036E6742C61F98C12CBEFF9D2FB0ADBC798
-:104840008321FD980FFA11F24FFC741F2F6E79022D
-:10485000ED804F9E3C88F98DF39EA3F8A7FD4F6C29
-:10486000B1133FDAD93E94338D5D22E69712C95FCA
-:1048700078ADEEFD2D2D2F63DE2FED08F7C6AD16BA
-:104880005F351DDFF8ECA191784F7E2FB353BD4FFC
-:10489000B2EFCC106FDFC86B213F5362F921E1FA10
-:1048A000D73684C5718EFF260EBFC7246CEAC17B44
-:1048B000A6C6CEEBCD165DDC521C6266BF03F19B33
-:1048C00038F69E19C53FDC2FC2FEF4BF27A1E5854F
-:1048D0001CDFCCF8A7719B19EDA3C64DEB30DED7DA
-:1048E000BCE914E6CF96FDF2A9788043F336D1985F
-:1048F0003FB549F45B30CF4B3C6861DFE530E431D4
-:104900003575B1F73B9A3A799E5058FECCBC5FEEB4
-:1049100078D64B4133EF999FC5033F7DD4BB311E01
-:10492000E049E7C3FCA3AB8BA2E4279D2F2FA9731B
-:1049300005CF4BBA0A7FA7233C2FE923F807D5E31D
-:10494000F94338DEB5BCAE4D4C6E51EC17467A0FCC
-:1049500049B35FE63DF5F98F218FF6F8D68F7F0CCE
-:10496000FB9FFF8F4F7F0C791D64678C02F644F329
-:10497000936F61FEA136AE7A08B3A74E6CFE19E6BE
-:104980006F9E78D78276E1891D47B2C05E38F1F418
-:104990009954C8CB5CB4A302E3138B7E5586EF8792
-:1049A00046F337813E7D17903F1A8E8FDD5DA2DF83
-:1049B00046F7F9C93B16E4FFFE3CB3CE052C7FCF8A
-:1049C000C5F3CBB644CED3D5F2A19ABAAEBD7A1C0C
-:1049D000C8BB2EA6D7FBF3A3CE9757F63B8AD74B7F
-:1049E0002F007F5B78FE60E75511F3CA3E817F5050
-:1049F0003C350E31E6957DDE75DB4F1E83675D919C
-:104A0000DFD3D6F8FA7C70D3F2802F1BA2DE3904F4
-:104A1000F868EBCF318F0FF056ED02FDFF7916C429
-:104A2000378F9A0318370CECB02890EFD5B8E30015
-:104A3000F2CB895FEDC73C5BC2F3714F90FE3F96AE
-:104A400037C96317CD1BEC2C1F8DC31FF2D55CF14A
-:104A5000D8CEF3D2181D6BF96AD1F2D47E3E84D938
-:104A6000415A7EF20257AFACD842F802FC084580AA
-:104A7000AF8386FC3FEDDCE1F3290087CBF4F997A7
-:104A8000D1F201B99D3E005F4C2E9F58C7F331FB18
-:104A9000F32CA949970FF9414C1F36FB840391F081
-:104AA000ABE55FFE340CBFDAF9A2F185C69FE7DF04
-:104AB000F75783CB9A212CFF5F83CFF1B391E57435
-:104AC0000FE777EAB7F887E8FC965BB9DFA2E59DC8
-:104AD00069FB6DEF647AF9F826663786F3775394AD
-:104AE000DFD37A6308F3EF9AB6F58C0439747CD778
-:104AF0006F38DD31BA6EDA7250F672B9EDD3CBEDA4
-:104B000028BF5FF62EDF37F57723CED7BCE554C438
-:104B1000F93E92D4EB61FF1FF5323BE4A34E31E244
-:104B2000EF20ECE67AA9FFDC7619FD2E313E16E582
-:104B3000D1227BD13BF05DB7457619F31D5A97F032
-:104B4000FC887BDCF83B1EADF649F8FB0F4B013EC1
-:104B50003A3FD4AC78F07727CCCE9A02F0AFC2DFE0
-:104B6000EB941D26E2D3E35FF2E2FBBD5386FE45E4
-:104B700002BDD3BBD8F8DE48AFA4EC49A6F3F59646
-:104B80000B6EB07707D29971FE6B54D1103F8358EA
-:104B9000359CEBB49B7D0FCD6EF22BB40BB1C7F4FB
-:104BA0003AD1D173B1DFABFE1F05EC5EF50080009A
-:104BB000000000001F8B080000000000000BB57D06
-:104BC0000B7C54C5B9F89C3D67379B6437D990047A
-:104BD000121EE1ECE64D4258C2534539092426F233
-:104BE00070414554D4253CC23389F8B8D4D2B24080
-:104BF0008C88B40D824A7BD12E34A87F4B5B40BC9D
-:104C0000050DFE170816ADB551D16AFFDA06880802
-:104C10001A6005CBCDF542B9F37D33933DE764438C
-:104C2000D0DB7FFCB5C39C7366E69BEF3DDF7C3336
-:104C30009B48E89F8790752BED598A959004E295E3
-:104C4000884C88D3AB04DAF208FE5DA1FF4B24B494
-:104C50006EE775371647B34613E2608FE87BD701DE
-:104C60008B44485C1EC9534612E222715E99D637C6
-:104C700026686F4A0984AC77FA27D3CEC915F81B8A
-:104C8000DFBD245EA51DC6B3D3FFAE507812C7D2D8
-:104C9000BA3D327E9266AC27135D1DE1D108E90B67
-:104CA000CFE99F4A48B94C21A3702495598231120B
-:104CB000BE9F9CDD37026F522AF186E0FD148737D4
-:104CC00040BF7738187C025E0ACF718047A5FF216C
-:104CD0003C856D010B41B88EEBE1A07F92CF89F04E
-:104CE0001D37C1775C0FDF30D59972B2805614A2A0
-:104CF0005CA1F875D85B09C7F3793D9E0909106579
-:104D000034E053E095BEA7FDB8A54DCA1509F0EAF9
-:104D10009248268E676A37D075329ED769BF7BE18D
-:104D20001FD711D27F89DA62A3F3F4D92517A0A186
-:104D30001F85B51590A0B4DA0019CF3A443D64231D
-:104D400085F4BB3DEFD9DA68B974E77BF8DE02750C
-:104D50005A26C7AB13070C27E4FEE0305F5A3E7CAF
-:104D6000373BCDE2C57AAB924A48C3347F9A653867
-:104D7000803FACB16520212F92BA21127D6FAF2FF9
-:104D8000683D7223F015FDEB0FEF0B5AB54278CF5B
-:104D9000EB8484089DC78B715D75CD9E46EB9EAEFE
-:104DA0007A00EA4D80FCEB61BC82D67ADAFEB0EA8A
-:104DB000BB5B1D45C8B4E72C444A21647CA723286B
-:104DC000011FB4F521241D9AD5C5015DBAF119C59D
-:104DD0002F498D7CD7233FF2EF289C153BE9FCA798
-:104DE000F967FB268E20648CC4F04A5C6D23A63BD9
-:104DF000018EAA256A6AA4DDB4E7CECB1E0ADF12B3
-:104E0000CA53D03EB1C2754B1E852F710BC5960A91
-:104E1000DFFB1F00B8B357F82DC01EE349DB831238
-:104E2000A527F93405E111E334EC97917F1B1EB3FC
-:104E3000045723FFAA926FA89E7E6D26FA8519FD5E
-:104E4000F61E43FAD5341F63F4DBBBF500D0BFA6D2
-:104E50005972C5A8301FEF2ECA44E4F1E0049F3216
-:104E600088D23526DC0074B59212DFE47CC4EB6393
-:104E7000309F6E78E5F0F586D7174F6D7BB2887E50
-:104E80001AE8B078B349045FE2BB1DAA0DBF2BF24C
-:104E9000F89F023CD46E6A6B88A570BD76EAFD046B
-:104EA0003F8537BBE37CA888C29B3D0EC5B86BDC51
-:104EB000173BB61DB0D17FBE087C4C5FE410FF6A83
-:104EC00097E36AF860FCDD858F3DC7103F16A8D3D5
-:104ED000E7BB6D6401D0B574AFA40581BF63C8FDA5
-:104EE0003E5A6E5729A351B8F6A9322F2546C70E50
-:104EF0008FA2D2F6A5B75BB4202D137919997F3D07
-:104F0000FF5E61FCC5F121E829F88890C6F8699434
-:104F10008E79B9FEDD46BE792ADE43DF8F6F3FFE14
-:104F200020B144DA6D5F497C73AD91EF28FFFCCC72
-:104F3000D0AEECE1387F61E47BE04BE013337D6879
-:104F4000BB109397A7E2611EFBDACFCB80EF6BA576
-:104F5000ABF979EB4ABF6FA2B567F9F195C83EC0CE
-:104F6000ABF9F9518E5FAA1902ED79A0B5259248E7
-:104F700051DD2FDD7F14E05B6A6F4BB89DD2B7A681
-:104F8000E4820DF0B03AFEEC0DFE28FDF40447EB90
-:104F9000A55C878FCEEF60670CE2BB5B3BA0271D53
-:104FA000E7DD95337D1329833E119750C4952DDAA3
-:104FB000B3895CEF4ECC5A349929AD2EBB275D895D
-:104FC000216810146A47CAE00985AF62EC2E05EC2F
-:104FD0006719D1D94B37F6BB8D0C037A580D766D16
-:104FE00052D62DA7C1BEB42A6D6B1229EA5BD32419
-:104FF000B43F375F6A6C01DB75739AD560E72A5559
-:10500000637D126176528C334DA374E7EF2FE0FF7E
-:1050100007717E53558A5ADAFFD4ACB860804EF9D6
-:10502000D6B177F926EAECC57B97E5FB7D85DDF106
-:1050300033D92DF0E343BCFE3E96E26718CC73767D
-:105040003D43D3D5F161C6A3192F133F9D3F99145A
-:1050500075C7CBB5CEBF0BAF84FC04E6374993C907
-:105060003A7704AF66FCD0BF29F0DD7B25F43B091D
-:10507000FC820EC542EB95D74944F805657D7574F1
-:10508000E7F099F16AC69FF03726F176EF00BE2867
-:105090003F4D92B738801F2A7FD43A3199EAB1CA7E
-:1050A000418CBE2444914BF17213419C015EB721A7
-:1050B000DFB9ACE86750BBCEF8E3D3F2D3121D7F63
-:1050C00072277D47E12C57A5201511C0CB71135EC7
-:1050D0008E9BF8E2B87EDE66787F0FFFB82E0ABF9F
-:1050E000288D7920F713DCD43F01FF2183A857A82E
-:1050F0003D1AFDC9C844A61FA2DBC9F19DBEAE7E04
-:10510000183E1A916F24E2EF7AEEA2FD84346B0A06
-:105110004503996077A19C4C20DA9A763BA04246E1
-:1051200038055C97D37CB7BB69FB1252B9A65D8F7B
-:10513000E74F853D67F89EC0F13781040EC80950DE
-:105140002ADFE8E72DFABB57CC6730190CFED08771
-:10515000AACAF432EF4FCC2F399984240A6058B28E
-:1051600007B749003F09D8FA44C6B372FA9ECE9AEF
-:105170005EED46BD5E47005FE0B6003D4BF9FB5279
-:10518000BB2304F010BBB5A38B2EE0C390592EF0C7
-:10519000FB285EC895F8087C0FBB25E5645E04BE5D
-:1051A0003347EC0199F2F5C474FF0F000F1DD23B99
-:1051B00045802FEA97E5803E37BFBFF0714B0DBCAD
-:1051C000A7DFCDC7EFF8BC1683D34DF926BC3F2629
-:1051D000B8CD1D4D9FAF62FAD74E3D519D9C96C6EE
-:1051E00031399F447C0AF8970763999CB5C42E44D3
-:1051F00079282775F543697F7F8CBBF908C8592545
-:1052000009E077652E231FF6C6A7B790F07DE0F77B
-:105210004ECAB39AFCE800D2E7606C6E16D8B3832E
-:10522000B14C2F0BFFE165B7EF5937BECF08825E57
-:105230003EAE8D7A17EC4455C9888F46D2D262F7BC
-:10524000D9809EF380BF285EC7027FD1B607A1EB4D
-:1052500074E4AF20B49FB3D6C45FF664ECDF47D5E7
-:1052600018C055AA59BFD5FBD55D78E376B2377F14
-:1052700091B428248FE2752EE7D383B13101F0E396
-:105280004A9FA0724CF13787F89F6F94000EABC114
-:105290007F9F1B6B457F6FEECF6351DE69E32D75FA
-:1052A00074C8F9F4F93ADA0FC95307EAED3A69D448
-:1052B000B507FADB55E4C7B92EF6AC9DF691DE07CB
-:1052C000FAA5DA8DE2936CB69ED7F3A579FC1EFBA6
-:1052D00035B53B28919960570F5AD5815E9DFD7871
-:1052E000D36DC1F99FB7676FB1787AC6D37C7BB2B3
-:1052F000A68C88D44FC6C6CE8CE62788FE045EBB3B
-:10530000D617E49BC6967191F5C563ABBF6E3D326F
-:1053100048BFBEF8BA55737CFFF5C5A9AD5FE3FA87
-:10532000E2690BF50F016F8A2F7F9ACE2FFADACD43
-:10533000FC976096F635C8E1D3DC8FA41C943F6DD2
-:1053400068F7EFFA2E9F404E50168BB193406C31A8
-:10535000D5030A09588BE17BFF2A0BA5B73293A02E
-:105360005DA27A08FD4F331E4E6795FE03F856C8BE
-:1053700067691CE57F2A8F4F58D4A646F0B3DF96A5
-:10538000A9CF4A475F3E07FDBFDB962FC4F2DCF191
-:105390004B39A0174A39BE150FB3EBB5F14CAE6AC5
-:1053A000E3991CFD31CDAF78E8F3564D768EA4FD20
-:1053B0002DDE2B7B63102DE10CE0B7DBA6C8A9F036
-:1053C000FC84DD8AEBC7834E46FF1344AA00FC949D
-:1053D000BE17E3DB43CB47D34A723D3A3FF1D1B42A
-:1053E00089582715D4E1A37CB9CCCEE4E10471330C
-:1053F000B8D74ADEEDF4D1F9B5EE44E0CF8356627A
-:10540000F047D23D0AC29BEE6178ACEAA4C2398271
-:10541000F15D1D1DBF4A516DE0FF5775DAF039C0CF
-:10542000817C196BECC7E361FEB8C7C3F8A9AA5326
-:10543000C220C1C158733F0A7BCEF9DB4C87A7DC81
-:105440001372603E8FA669B91EF45F5505F0533A9A
-:10545000B2E563D087BDEBFF8004FABFF692141A61
-:105460004CE7DFB1C78AEBBA0EBE2E38B3E750DF88
-:105470002A5A2EDDF54102AC1FC7727A9D515A138C
-:1054800000BE25AF527FBA10D9B9EF3DD87ECEE825
-:10549000756C18BBDE2E5E7F3973A00FBFA3008E24
-:1054A0008EF86513EC8120C07770953C13E846EDCB
-:1054B000A6F0CB24D093657B642DB6A8BBBF36D5B0
-:1054C00063E5FE3AA3E3432E364E4FF25DDA194F01
-:1054D000823AF92E555405E02FED4CC0E7674E6D2A
-:1054E000DB3895F27D20CD8AEB436A855AD05F94F4
-:1054F000085FF0D13A9D4F0B9FCFE13DB7DD7E03B2
-:10550000FDE79B607FE83713DBFC294CD8E9EA6EA6
-:1055100074C4FF2A7319FD44B31F29EC5945F3865F
-:10552000FA0104F01EBCED06E0C3530A013EECE6AE
-:1055300067DB6FEEC19FDC807CF4DA9E5FE13AAA04
-:10554000C8A362BD76CF8572E0E31A129A01FDD638
-:10555000EC915D21FAF561B2A700EC8AB0FB022F55
-:10556000A14B87EC5EB00BB1B26B35CCD37E8743D9
-:10557000A578BAE15C610ADA3FBBB502F462696CF6
-:10558000B6638E8E9F0FA6C815C0078753328DCF86
-:10559000ED1B0BC0FEEDB3307DD472F26E471B7E67
-:1055A000775B0AFA71C2EE9BFC561127ABCC96834F
-:1055B000D1FC61226FD9144BDF4FCAB51219FCF729
-:1055C000B645E80F74B3FB97FCB83E30DB7F8177BC
-:1055D0008A6994976E7E6B04CF06FFF5690F8F97EB
-:1055E000A96428F8A3A14B1B17039CE79AE35DABC2
-:1055F000311EC1FC9D73ED8B364E81E7EFC8185FFD
-:1056000039774946793AF8C6E2C16D3A39A61604A7
-:10561000E97471F8D7675FA7F4B9F8799C3780FC13
-:10562000B7B320DA7A59ACA3E8C8FD2D69087F7FAB
-:10563000CB5814375CB7DE1459B7FEDA83EBD6705B
-:10564000399893B42DC76CC01767A80B0FF00628C4
-:10565000F1B753BCDEA4B5C92E1D3CFF97CB7791A3
-:1056600047DB057A25404A0750A7852C88D34A6E28
-:10567000007F741A716DA3F3D97FAA54B2D2FAB81D
-:10568000ED6EAF44EBBBC12105BE7D550E6EA77814
-:10569000D84DF5F16EDAEFC2D6469B9B8E1BD843F0
-:1056A000811A43EB9490808753D64046928E4F16D2
-:1056B00065B2714F59FDBF847E4E7D1243607D7887
-:1056C000EAF3B8A876B83893E9CDD7B99D7364AA40
-:1056D000D83ED4F1DA9BFD295CA14ED770C0FBA265
-:1056E00097BE9667D3716EE4FEDAE44DADF510D740
-:1056F00099BA25AC80FEF1055D656082A7BFE4B56F
-:10570000825DBA7D87CF0AEEF98C3D7556783F737E
-:105710006FE361A8DF1DDA89755BA6FF23C0EB4D3F
-:105720006BC387805DB21A89027241BE617E589850
-:10573000CB9DA7D37B3011B9BAC4027CDE35FE8A7B
-:1057400056055CA2A9F56C7CDA5F1BF657179E0024
-:10575000F62D6339EB2F831C5895A846FA1D7FA9B7
-:1057600055D2C71B4A7FB804F9E8F947970C4E0693
-:10577000BCFF358664BBB96CA4C0F38141587F126D
-:10578000A52D7FBADE3F23A118C637C4CE4AC14F2C
-:105790009A9DF1912B0EFC85479EA98B03FD90E20B
-:1057A000536D7E1D9D4A374E1EF216F0696C0CC675
-:1057B000ED2E0E677EFDC50D8E6080C5BB8700DFB8
-:1057C0000A7B5505F436C4A384BC33BEA75D04012F
-:1057D0000E511269B58BE8EB24940670757A187D2A
-:1057E0009B6CEA2C18AF292EC605E355D9B36DA0E2
-:1057F0009FBAE29F1044A47AE206EE6FEE3F753046
-:1058000019E87A71F8AA0C5817842CFF8EFAA83779
-:10581000BE5AE2D1923211CE4006ACABC4F7FB4E79
-:10582000C615823D7C5DF861DED98361BEA25D5103
-:1058300026F30BA83CE0FC851CA4B4126D6B21A2DE
-:105840004ADBADC3477E268BE38972B7550D3039ED
-:10585000A27E08C8953364CF0479DD9789F5141FBB
-:105860007178E9FBDABDD95E594539CFCF4C8DC887
-:10587000FF8D5CFE535AC32877D7BA3E706532BE9F
-:105880000D293BB9FC10D443203F4C4F870630FE16
-:10589000080C00BA805EE0F449976859CDE92CE61F
-:1058A0009DC2E57E2A976BC003BCAFE4F314EF6F93
-:1058B000E6F82A930B13DBA2C47DBAF86E793A019D
-:1058C0007FB16CF9002C2B39BC0BED1B309EBA302C
-:1058D0006503C65153B4462C174E6CC4E7695B662A
-:1058E000237F2CDC2C19E2A2A27C81FB5F674E593E
-:1058F000D07E114B5C7FE03FF1FED7E067B0B8F09F
-:105900001D80E7D37B363E53A446E2C2A79B983D59
-:105910005C1067F4EFEEE6F3DAFFCDC164E0978B3D
-:10592000B18D53EF0639D92EBB56011D9BCA2435C4
-:105930000AFFE9F10C78AD6DFA4739CCA386B4358E
-:10594000809E3ECDFD32B559427DAAEEA5653F2A27
-:105950002C4D4CBF9EB232FD7E4A4A96403E40BF1F
-:10596000839E3DF5F9BA8C47818F2427FA37A037FB
-:1059700077E9F863F18EAD0DFDE93F6FBAE41A0ED9
-:105980007C15528843AF9F059F087D6B867B05A7DA
-:10599000ABE0C31B22766805E00DE2A740B29A0D8A
-:1059A000E7317EBA81D3AF09F80DE479ADE0B7E114
-:1059B00016D4A726391EF32FD2DFFB9EFA4506C662
-:1059C00025C652B9A5727D1AE43A0A5FFC9CD36FD2
-:1059D00089C7BF29338ABE3F2DF97F999C1969BFBA
-:1059E000EFE42D43AA74FD3CC8F171D1EA1FEC8AA3
-:1059F00082AF085E497FA0F3024A19C003D922B9D9
-:105A0000C0EF13EF53B6B07D8097B91C89E7A22E83
-:105A1000F03D1EF09D89F87E3993D97D1B98E4B442
-:105A200020B3FBC4724B7FB0E30BE3B45B300EB327
-:105A3000C14220AE44A452E4F794A6A74F5E1E09CB
-:105A400065AC07F755A85F0DFBA50B9F50711DB8FE
-:105A5000FA8558E4B350A607E7B5BAC98AFC76DAE6
-:105A6000DA98817CF9F9A2C1B02F13F884D9A19EEC
-:105A7000F029F8E727DC5E0BBEF3AC677CD7A4689F
-:105A800071C077C28E0AFE3CBDFDE6629037D13E02
-:105A9000C237AEE1826F66D3E79EB56D32D087D252
-:105AA000ED8F8087CCF561D45F3DD14DECB709FA1D
-:105AB00009BD9E906531E0FB330E7F0AF75FBAD3D4
-:105AC0007195811E3746F8FF5333FF5BD5883CFD47
-:105AD000A11739B83ECBC5E20C9FCD4903FD22F694
-:105AE0006BC43EAA18FF2CE7879EF65B0EABFE3315
-:105AF00099BAF9C07EA08A7A9DEDAF94717F7BD967
-:105B0000F698600CA5DF3E7805FAA23D2E087EA22D
-:105B10006897AB104D2926E4BF33DD385E2EA80A06
-:105B20005A4F596E235974DC8BD71D6849A0DF4F3B
-:105B300009B74D1E46A7B6CFD676FBAD10F725DACE
-:105B400022F02730560F7CDEC1FA25AE9D0638AD17
-:105B50005916C33EA898774F76AB277A5C9FC5F756
-:105B6000C7F87BB39C1FE3F83AC4CBDEE53490085A
-:105B7000727A1309AC82FD117289B8C01E77C9E927
-:105B80002582F6657096514E453D8A9C0ECED2CB4D
-:105B900069671B93532E8F894D562D9A7F32348B14
-:105BA000AD7B139BCA4AC09E24FA08C63FE8345115
-:105BB000AE1752B906790D807CF6037C32FEF2688E
-:105BC0008DF7C17B4F13F3AB2F26B1F92EBC513BA0
-:105BD00020839C53BF5EA29F3672B9EE19EFA14499
-:105BE00089D9A744D027378D6B9B00F656857D81D8
-:105BF0007E303F46DFF1E3483044E9AE5E224C4F51
-:105C00007CFE8BFB1E05FDB0C1E1CD5623F627ECD3
-:105C1000F197001E7A9267CA971AC4A396FD9783DC
-:105C2000AD037BD81F1FBF5C46FEA37C7E4B960E48
-:105C3000FFE37D6119F09A1CEF4FB32611724FD329
-:105C4000D0E9F641747E6EEADFD2FA4C5A5F0F71EA
-:105C5000B73E6D84D79F72A47FFF38DD3D5985EF35
-:105C6000D753B80399DA5D59A9B86F7D0FC073D3C4
-:105C700080B00CFEE7B5EEEFD7427C8ECEE7F81D84
-:105C8000435E984D9F56DDE56B80B7228E3C86C7FC
-:105C9000916B9B87637C59174F5E94759578726FF3
-:105CA000E32670B9A7FC8DEBB884B16119F4A2D0DA
-:105CB0002BCBB3FA707E6E23B0AE10F2057A09FCDE
-:105CC0005A916700714527EE5704F17BA8271647C4
-:105CD000F4CDFA464B4534FE7E3CCB11558F92E60F
-:105CE000FFFE8F4747D3F9C22BA6571FCFD2E9D566
-:105CF000A6C6E37D999F4AAD3CF51B1EE46BF98D6A
-:105D0000ABBD7FCE02BE7B57C678CA7531B6800464
-:105D1000EB7E8DA8AEBEBC3F10BB6629E42CA2F57D
-:105D20006F25A2419CF25B19CB8D3FF655B8216ED1
-:105D3000F2B1C5BB9A60BE02E267EC6012B4D37FD9
-:105D4000EEE5F1CF92130E0DF200CE4976D49FE727
-:105D50008EC505C07E9E735A306EDEB23F06E5E208
-:105D600042561C8F67040D710FB19F73E19D39C9B5
-:105D7000A0F79FE1FB9BCFC4B2B8EA3377E5603C64
-:105D800052C46D1585E2BE0F84A9285EFB807F3C5E
-:105D900000E3A9228EDBD73E5B6249456C1CC5CE71
-:105DA000E6D757F14B101FDFDA4B3EC4EB59361ED6
-:105DB00007F0EF01FEAD5DD1668375ABF07B855DCD
-:105DC0001EDCE139007911832B58986C6B87C50272
-:105DD000F3DC4AD929C9DD9DBF041F6DED9E7770A4
-:105DE000204B17A79DF618CB3BE8AAF376BFE479C2
-:105DF00007E3DB8FBF02FE1C95F75D867665A97110
-:105E0000FE287A6BC6F21F62FB9EF87F8685F8A398
-:105E1000D99113427F2B7503C04E91BF3F12AF46FD
-:105E200089CBCCF8AC2A15F0628EA745C6FF318E1F
-:105E3000FF59168F1F65900CD85FEB6D3FD30CF7A1
-:105E40004756FFA068764AD0D93C5EF7F66C1DD65F
-:105E5000F59D8DF8773958BFC5BA7E53B299BF33D7
-:105E60004362FBF5E432417B2DF884E2FD3F812F54
-:105E700046FFE9C48838DCE709CBA00F2E7C9C35AF
-:105E800010F7DB7B58770A7808F16747CBEBA0E384
-:105E9000F9A2D121299BD1618695ED4748776563A9
-:105EA0001C60466C8C14A3F34F2E77D95BCDB02FBA
-:105EB0007B3076CC488C5F5AD581D1F067DEAFBDA0
-:105EC0009C45905F012FDE28FC24F695059E1B4A19
-:105ED000B41285C5C7C83630811AD3A3291504F773
-:105EE000D7C6481AE223339BF94D5B79BEDC857730
-:105EF00064D40BA34BD4206C91527BE1CE1E85F968
-:105F000057AF5874F957824F1A7E43EDB2217EC8BD
-:105F1000E44AAC9F93B83EA65EA3B64BF79DBA0287
-:105F20007440C41E0CACB71BEA190FB988A2B31792
-:105F3000495A9AA13ED0E78A8375D3C00AD5D04E7C
-:105F4000F09DC8FFC3BF1498B70BE34F7D383C6387
-:105F5000243FF20DE837880F97707AD2F98EC7F98F
-:105F600056B45DD0F38D986F6FF33ABE92C243156D
-:105F700058FB4A0A2FD50B73D6BB57A521DE5D040B
-:105F8000D6132757DAF1F93CDE3E69D3EC86743A32
-:105F90004452BD8A71D924ADEECD74C8B7ACA37597
-:105FA000FA37B7519260BD4EF50CB67B6EA50B4B20
-:105FB000416F177D2F817D2F2579B04FD3931DF32E
-:105FC000673B0CEBE1ABD8317FF6A8EE76CC62F7FD
-:105FD000BE05FBFF4B9B6515F862CDE43E1AF0D37E
-:105FE000C69D9217E26E879A591EDEC619CC9E880E
-:105FF00071CFBE9A8876E3ACC4E49CB424A11CD4CF
-:106000002671DAD427E17EEC39BEAE5E91E5AFCBE6
-:10601000D6E9CF8DCDA362715FD66497E89F4BA27E
-:10602000ED700F4E02FF69F85A2513F5C072809F7C
-:10603000CC6F1B119B097CEBFF609C047AE09B0CEE
-:10604000A0A7795F4FECFF897DC13FA6F95765EBAB
-:10605000F456F7FD3EE33E959C60C73CDEB132CB83
-:10606000E3D5D95F02745D037E22E5BB35C7E2103C
-:106070003F6B2E33F9A370FE04C669718E467E1203
-:106080007696C259F42EE90E67AD258CF1421D9C1F
-:10609000CF5C1D4E539E2B87AB0BFF7C7F4A762A2D
-:1060A00008FF3912E70538F7DABC1FFBC10E9F8DD8
-:1060B000C3F89EA04F0D97B173941E1285F3DCDEDA
-:1060C00011B11607F847FE17805EF2A07002F8E7DC
-:1060D000879A47E4C37C7ADAA73D9255FA7236CAAA
-:1060E00099FF37D06EBCABEDC26FD5C8FCAFB2BF65
-:1060F000BB0BDA7D07FCBCA6E7A3DEF053AB38D6BA
-:106100004A2C408E7E98C4F5B499EFA4E603FF05AF
-:10611000794754DE30EF339041826B28DE1A8632A5
-:10612000FE2373898A76D9C4272BB27C6F03FC4285
-:106130004EAF829F7701EEDA2C5F2B7C0F700C281C
-:1061400046BDF47E36B36FAFD82CD89EE5AF241190
-:10615000CCC731EF9F9FCEAAFA04DB0BFF2BCF2FCA
-:10616000B90ABF931C1CBF3A7F85902F96723C2DB5
-:10617000857D5DC857DB63ED30E44598F0F0789697
-:10618000AF83E181F2D948C6676BC855F11186EF3C
-:106190006BB3FC17002F4E2BE51740CAD8D9698086
-:1061A000E7C3AAF635ECFBEF5EC5F071EE4F0C1FAE
-:1061B000FBDA2DC8D74F93212897C596F3F741FFF7
-:1061C00054BF5C867EC685774AB06EEEB740B58018
-:1061D0005E1E10F6CA96ABF3AD9483EB27BF022583
-:1061E000A5C383408711EFB078CE55F8D60EDF7F78
-:1061F00007BC27E57C07FD43F92A15FA177C75AD26
-:10620000F956942FC8803EDDFBA3EB28DC5F38B045
-:106210002F06F555CD6E09F579CD1B5FE07ABDE609
-:10622000B51864CA89AFC5E2FBF37BD8FBB325D1AF
-:10623000F3013272FAA0DD59BAF3019FD14E07F093
-:10624000F9CFB4F3AE2C39B2BF9A3C859D435813B5
-:106250002BF24DD93E6B02E7B3E4413E0DEC507298
-:1062600019C17CC10407CB43EC7EDE80C96D2A6F67
-:10627000E772A912E0D97CFE408E63F985A964FD1E
-:10628000D780A7E40AE3FB544705EEBBA69ACE29C4
-:10629000087C97E570FFD946D2408FEC34E55588ED
-:1062A000F2FD1CEE07D627E17A50E170B5386DC8D3
-:1062B000B7CB9C769CF7B224923C19EB0ADA7F7339
-:1062C0003F5DFEA76621AAFE1C45451C5175FE5187
-:1062D000AAAF8FA1DE6F667FC3F7E97E8FE1FD80F5
-:1062E00005430CEF07D5151BEA83975F6FF8DE4D6A
-:1062F00011A0AF67AEBDC5F07D76E374433D77F383
-:10630000DD86EFF3835586F7052F2D32BC1FBA7358
-:1063100099A13E6CEFA386EFE51EFCF26773589CD3
-:106320004D167EB973A41FF84A76DAA518DDFA6F08
-:1063300019A7474942451AEC5BD63BCBD3607DDABF
-:106340009244EDF155E26EDF77DDD628E8CFFDAF60
-:10635000521E773B7B906A11CA7F3587281F0C43FA
-:10636000FFAB3187FB5FB355F83E6C437BA278717E
-:106370001E3312EC184F33F7BF2C478DBADE922D27
-:106380005ED764A9677C09BEEC0D5F9B395EFFB7E1
-:10639000F8FAC8943724D67BE6767FCEB1707FDCDE
-:1063A000BF3B47BFAE2361D987EBBA6FCE0608E883
-:1063B00051827E4D6DBC0BE312663F408CFFC734AB
-:1063C000DFEBD08F599FFA96CF67DF59E80243EE93
-:1063D00079BDF7E71CF37AAF6C26D223C966C0D328
-:1063E000FE2E3A6B86F55E7DD2685CEFD55BB5B468
-:1063F0006B59EFEDCF2188EFCD40D7541D3D6D5E39
-:10640000D5857ADEE8BF74F7CFA9FDA3F3DC087E5B
-:106410009D047E5932F3D7774B386F31EEF7F0CFCA
-:10642000DBF5F6A927FF3C8678D72A32D2EF4BB0AE
-:106430004FD41F7F3056FE5EFEF885EF620FDFB748
-:106440007A318FFDFD29325945F178A1624C3F1216
-:10645000451F8BF2288FDFECCE2548B7DEE21FEF19
-:10646000AF5C70D5F31CEF57B23CCDE9C047BA71B1
-:10647000D373195F8CC8E5FB92312C8E71E63F9C7B
-:1064800078EEE0CC2D1F261027E4B78D1819803C3C
-:1064900066E27D08F26F020E27C609A7578E1AB969
-:1064A000CAA9E3ABB10CCF137EFFA70488FF4CDF72
-:1064B00095991A70F4CC4F23F8FC88D2968379D939
-:1064C000AF9FEEABD272FABEEC5416A734E6AD998C
-:1064D000E346D397D718E47869A74482C9BABAD2F9
-:1064E0008AF9814B3B157C7E39C71857EA115FD773
-:1064F000884FF37381CFF72B4F67403CFD6C6C7472
-:10650000FFE37E8EEF2EFE319D83E9E97C4739EF74
-:10651000FF42C575FD40CF4DB7A9D9D712E7127814
-:106520006ABDF4453CE88937E07C4D94FEC7E7B28C
-:106530007DA537B4CFE1F80329B1872700DF97F0B5
-:10654000787A94BCFFDB7261BDD459F12FC9FB9FEF
-:1065500095CBE9C3F3EAF372D5A879FFBD9D5F9AA5
-:10656000668B6EEFC646F0F721C8EB83CF595D000E
-:106570005735F84E10BFDB6AC5F8DD07976208ECA7
-:10658000A77CB1C5FA2BC8575BF05CE6739B687DAE
-:1065900041650CEEFF546FB5B2FDB9CAD82084AA8C
-:1065A000166C7DB8EF1C3ADE57546E9764D3F7CF64
-:1065B0003D8DF9331FB4AFC3FCEDD320CFF4F98286
-:1065C000CB8FCF00FCEFB335160CA7E5921D92E1FF
-:1065D0001CC6A2A658435DE4030AFA1129723E4381
-:1065E000A5F6A421D7781E6B4464DFAC2197D96B44
-:1065F000CCB3AF99C2CE631D3AC9D6FB87B358BEA0
-:1066000060A8F2CEC9C3E93C2A53AD182F31E71771
-:1066100012824427F379FE6FE5270A9EBBAD1CEA80
-:10662000443FF0CD95754807DACE51A63B8F50F91F
-:10663000731677A974B3BCF91EF30E4DF986E27C8C
-:1066400050B73CC3C8F9A0E3D1F8E657B946B93E04
-:106650007492E515CE7F4766F3EA456F1EE5F3F8C1
-:10666000A07DC8BDBFA5F8F8A08269F10F2EDDFCA2
-:1066700018C4BDBEF04904F23CBFB814FD5CDA3F5B
-:10668000BAECABBFEBDC0ED0E7B68A855D7510CBFC
-:106690003B7C0F18CEF55CBBBEB9BA3EA9CE65E710
-:1066A00032CDFADDCCF7FFBFF4FBF4CAC3190127E2
-:1066B000962F40D9B18BE947B39C9BF5B980CB0CA1
-:1066C000EFD24ED990873C16F4C028BD3EB7E17B8F
-:1066D000EAEEE37C02A395E01A09FD80CF81EF4743
-:1066E0003A82C92574887AD7B6F8ABC56FE8FAF94B
-:1066F000347C5FE3F6774099FCC7FEA560EF47BCAA
-:10670000B313F308CFF5904FFEA1DB94BF2619F722
-:106710000BBECD2DF910D6FFEB54560AF91C498556
-:1067200090E73B7C9BCBF6E57E0AFB96356F5D449C
-:10673000F97CDAE64F83F840A0BFCDBB3D4A7E88A6
-:1067400092F7DDCE25EC80F83CD03D2FCFB0DF07AF
-:106750007122CC5B381E8771A2E7D3B4B83CFADD56
-:106760002B695A7C1EE8F334CD91A7B34FF57C9E7C
-:106770008A25BA5F5C9627F8DF87767C5E29D5BFCD
-:1067800051F8D09BC7F2F94B9EB92B03E2719F1FC2
-:10679000BB3B03F463CBD363AE9AD7F633904FAAD7
-:1067A0003F9F04BD9F1DD94FFD09971B11EF9E67A9
-:1067B000F3E5E8F3B192F392D87EED75BB5B3D94BF
-:1067C0004FDAD7CBA8BFDB1D2C8FED8443A9682AF5
-:1067D00064ED520CEDD8F90519F89ECAB1E250BE2D
-:1067E000D5EBA332E0E9D49EE759C6E964235E3BCA
-:1067F000B4B71DBFC50E76549634178BFF337EB8E1
-:106800008E8E00FCF038D76397D3FCE301EF366E31
-:106810006FAFE3F6567198ECEBC0ABEF8FEF4DD353
-:1068200026423F77A7696540D7BDB64001C8CDDE97
-:10683000B8E8796993F2983F129BC7F98538D07F01
-:10684000C5F164DCA79F9AC7F6E97D50DE3420BC11
-:1068500006F2C93F74BBBAF6B97D789EDE7707BCF5
-:1068600027696DE456C893A3C0C23987D74F1D2747
-:10687000A0BF12C2ED04F269124CF9AEA2FC2A8F3D
-:10688000F91FAFF17DCFEE72C7F8CCCFE16CA2F269
-:1068900002E74185BCC0FE3AE44BAC53FD5CEE58C8
-:1068A000BE47D3537D24D867F168AA05F803F24C9C
-:1068B000413F99F3839AF3981E053994AE22870FCE
-:1068C0007F47396C7A6AB22516E07C94605E075582
-:1068D0007EABEDB4FEFC329717CE8765AE27B80EBF
-:1068E0001AB43C6E1BAC93025C9E066F22AB63E94C
-:1068F000D76E9EC727F2A2DDF56D0A9E177894E544
-:10690000E99DFEFC16D909FD7F2DFA37E6058A3C84
-:10691000BE468E5F318F251EFF93C01FE6BCEA9EE8
-:10692000F3BFBECC873C87E784BCF33C9C713C0F33
-:10693000675CD3D3188F1BD774B322D14F9E5742B5
-:1069400012ACF79EAFD314B037BFCB637939BDE536
-:10695000C1BDCCF9B191D3B9A77CCA17F87751F270
-:10696000295FC84BD5E593FD80E5533E9EA7E2F72E
-:10697000CFF33C9AE7EB58BC6ED14BEF49FABC39E8
-:10698000F19DC8BB1BF810CBBB7B5E698B05FEB9C4
-:1069900018CBE875F10771C15518946F1B1EFD1CCB
-:1069A00082398F9CE58F0F0E874B301F8810BC07F4
-:1069B0006148BE6AA0CBD6B02B0EE4A5377BF0268B
-:1069C000A7E7B5F2E18BF90C9F51ECE63B80AFEF06
-:1069D00060375BF398DDFC20EFFBD84D6E2F85FD13
-:1069E00014EF8F717A56E751BBA9F36B7576F358A4
-:1069F0005E14BB99428298A7413A2C5E7D5EA8281E
-:106A0000FDBCDFB73DDA17D07E1C8FA724741C278E
-:106A1000924E0F4DE7722DEE9778B10FB97F5A94D1
-:106A2000794CE1FD596685F13E8A8466296A1EDA51
-:106A3000876EA64FA85EFC4F94B3C1546F4ADDF534
-:106A400066147AFC13BE1FF08E760898E4FAA4A6AA
-:106A500078709FAE420F4B7E2AD04393A114F82F3B
-:106A6000BE625C470AFCC7E533F9ED9BADC5E6D3D2
-:106A7000F22F5CCE7AA24B7A3EF36386F052E4A901
-:106A8000EF36F9A313F2195E6ECE37C61575F44BC7
-:106A9000CF8F423FA187DFF6F806023CAF9DDA1D9B
-:106AA0000F7C24E824F48F995E11395B25F6C9B375
-:106AB000F3A3D81FD1DE6C8722ED0308F756E0A3BD
-:106AC000912CDF07CF11F0F308023EC1E71A9FE7D0
-:106AD0005F3DDA7080D70CA7ABC3225D0DCEA470EA
-:106AE0008A04F29FA4B9B07CFD944502B85C6105AC
-:106AF000F3DD5DDC3E9AED2055171CAFAC9F17B956
-:106B0000DE6838C3F2101B4AFC6910FFCFC9D626D5
-:106B1000025CD5795A1994D7656BE5507EE8667E9C
-:106B20004B7ABE560175912F6086D397DF957770AB
-:106B30002BE033612209803D84FB64609F2581E75F
-:106B4000312468AE52B063095B08E60924C7870F99
-:106B5000C4C0FEDFD3C40BE79F7202AA05D65F99BB
-:106B60000F69ABA16C38C3EFC52921787EB22B8F9A
-:106B7000AEDE837974206F7A7EADE278AECA677A32
-:106B80008EFA21F7E733B866E7EBFC1021473DF9B1
-:106B9000153A395C80EDAE5D0E6BF3BF9B1C3EC8B1
-:106BA000E5F0A16B91C31F46E4F051F8BE37395CA4
-:106BB000C7E5EFC55EE4F0FFF07E7F97DFA31E5DC3
-:106BC000174D0E459EB0E0779043B0F741DE1FD5DC
-:106BD0009F3FCB4FFD5E72B9399A5C9AE5B1ABBF6E
-:106BE0006BE4FF9EFCBF0143FC7CDED1FDBF1D3C7E
-:106BF0005F5CC833959797B9BCFC9ACBCB0E80F7F6
-:106C000043B78AE398E5ABCBDE84999E80FC3C7D5C
-:106C10009ED6E108BE5E857ECC7939E34CF1FCCF8F
-:106C2000F2193FBCC3CB84F071027A81E2ED8D7C16
-:106C30009DDD7891CB4B602CCB3BA5925A0A7EE52B
-:106C4000BE0EEA470238F90CDE719B5B0F81DF480C
-:106C500094C678B8E7AA273C7986A8625F202A9E66
-:106C6000E8F87F86F1CD746B06BA39BAFBF3667A21
-:106C70003573B90D737C7C5F3804FE008E61088724
-:106C80006A59A7B3F39F733D41E16D0778C74F0C75
-:106C9000CB04E10AC5C3FE89D0A764206D3FB27B57
-:106CA000FB8E48FB0EA0D7788DB62F8CB44F825048
-:106CB0007E26E831AACFD04FD6F0BC62839BF18309
-:106CC00099EF9B6CEC7C4417BD1AFB23BDE6AAFE32
-:106CD0006FA1FF26859D1B695AEB92D8794096EFEC
-:106CE0007B225343BE8DA287C890EFA68794214C88
-:106CF0000F59875C831E720CE9D243F1F07D38F79F
-:106D0000EA7A6800FF7EE090ABEBA10CFE9D67483D
-:106D10008FFEC0009897590FAD53191EA2C8E960A5
-:106D200080EFDB5C4D8592CAA97B486AC4AED17600
-:106D300099509FCBDBAF6F64F9160112E78DB6CE89
-:106D4000F00E715C6BFE9997C3F99DF2A837FEB8FF
-:106D5000CD06F816794E625C73FEB4A0634DF3AABB
-:106D6000116428E4695DCA00BFF2DCB16F313E7284
-:106D700024AB4A83F15BF68F31E46589F197F178B2
-:106D80005A995CB813E2B3E78FD830EE2913F5D9DE
-:106D900071149EDA235612443DC5EE1B10FB61D6DA
-:106DA000230DAD108FB712DDBD50B89E5113816F0A
-:106DB000AD47D8FD4C2485BD0F10FB2A76BFA371CB
-:106DC0009F3F4933EEF32757F431EDFB1BF7F9FBF7
-:106DD000CD34EEF3A7FB8DFBFC0316149BF6FD8D63
-:106DE000FBFC8397979AF6FD8DFBFC996BA79BF6AE
-:106DF000FD8DFBFCB99B8DFBFCF941E33E7FF55B10
-:106E0000AFD8605D5DF0D232D3FEBF71BF9F22A4C8
-:106E1000354B775FCCB0BDAB0DDFCF6D63F7900D19
-:106E20000FAD33B66B64F71504E87F80CF2F88DF92
-:106E3000067CA690F09B0320BF25287943F4B385F8
-:106E40007B778D86B298C7C5AB371BEF395818349E
-:106E5000D6BF7ABBE208E481D58210D17E6A5F9208
-:106E6000824177CF745FFC92B1BD88F32EE6F3398F
-:106E7000CF9D82F35B643CB76CE693EAB76E63F731
-:106E80008605B456B8F741E041F08B8BF38B804B0D
-:106E9000E063B1BC04E55CE041DC9F55639A7FB7D9
-:106EA000F9EEDD8AEDCCF336CF63FB90AEFBB0702C
-:106EB0003F8074931307CB13A2F3827D72399067DE
-:106EC0009213231E7AC2DFB5CA8DCAF1109366945D
-:106ED0009B5835CECC77486F333EE3F38CF264C6D3
-:106EE000A7D3DB3F2A7F89FB4F713EB01FB25722E9
-:106EF000BF90BAE37541F386860151F8897A7E988E
-:106F0000E761C6EF7B26FC1E56FD47413F5DF8F862
-:106F10001B19E9EA6F1B01F6EC2AF9671FF3EFAFC3
-:106F200075BFFD187C2FDA9BF7DBCF419EA4EEBC2A
-:106F30008AD44537CD942779E8BF601F89B6F1DB45
-:106F4000200E5BE1B5B3FBC0CCF96BFE736047026A
-:106F5000A51AC138E079E25D43FB5BE3FC8F825EFA
-:106F6000E2221786A0BFEBC7FB85C687DB2EFC1687
-:106F7000BA575A5D304EB47B484DE70F2FC3B8DF88
-:106F8000F79E47E1B7D3759252C0FC6E5B817E9D40
-:106F9000D475BF2A5BEFF4D48FC823EBA9940ECA33
-:106FA0006857C3529C37DA3D65E905467BAF3BE73E
-:106FB000995EA0B3A3350F5F7813F41EC5F7407830
-:106FC000EE7452FF46BA26FF4685EF9F8D4F40BEB6
-:106FD0000EBF250773DD707F959AD8A7B0FB7D4B58
-:106FE00022AFB00EEE534A86E7F98957CBBF28355A
-:106FF000DD7365BE97A8A198C155CCE7E9E7F75DB9
-:1070000095F3BA389726E271B53359BCF969531C28
-:10701000B3BCC0C9DA679596039D1ADC12FA4F0D0E
-:107020009264D84FBA38A4A41CE6ABF1FECB21364B
-:107030009F8AE7EB10AE14D33ADE52C0BEB7149469
-:1070400062092B7AA0B74D96A3E2735201835FF8D1
-:1070500051DFE39E99A33123BBDF3363BE1FB13CF5
-:10706000AFAE05D48379DFF7D5DEEE99395A1E75B8
-:10707000FF17F01BDF27C2F7730B8CF72086E2FCAB
-:107080001BA7403CE24FB217CE9B98E7FD4001F3AF
-:10709000FBD7F3750BEC2BC17AA40F2FBB7FCFF07E
-:1070A00014CCF23D807855285E29BC211BBB0F34DF
-:1070B000FC21C171FA2FD00E407D944FC5F3150D00
-:1070C0006EE280FB82C2C32D181749F1BB26C2BDF8
-:1070D000BE295BA43E804EA117AC0A093829BF34F3
-:1070E00016B891CEEBC99A0370BF49E296AF8907F3
-:1070F000D713AE892ED0477349D438E7937C3ED35B
-:107100009EF328B02E4BB447BFCFE1493E0FAA1FD4
-:10711000D6C13CC6DB8F8D903C11FD024B5BFCBFA2
-:10712000768BE15CB3284F644E68047E1DB580F415
-:1071300010F7647C7A83EA7B06FA1F7554C5FD8AD2
-:107140006AA1A7E75A08DC3B7A17679FBBB6B0FC79
-:107150007572E9CA1559F8DD04FB27B07F50BDC42C
-:107160001984FD84EA6637DEC7471648B8CF51DB7D
-:10717000FC9E0FEAD52347BA50BFC54B12DCCB08A3
-:10718000269FE933859C14FC22F349D1FE6772FBEC
-:1071900020D6F7D41EAC8FA778AFDEB2F5009C8F57
-:1071A000F87FD4F003DD3E96FD1FFF90F67B073598
-:1071B00052CB8BA154C82C8CABA7613FB7F37E0296
-:1071C000DF12E9A43D32EE1DCD6FE17C3EB6928028
-:1071D0009D3293B5940D6D7D3411F75B457ECE0CD9
-:1071E0007B6319D8B973B670119C9F3AB7FF2F8390
-:1071F000601FFEB31F5D70C2BEFCDF95B0139E9F83
-:107200005AF18113EEC5FB6C05BB3FEA3E6E3F04AD
-:10721000BEFFC4F5825AE86B01BADCBFF2F268FD2A
-:107220003D3864792AEAFD854119533A845C2D7E04
-:10723000291E3C9BAEFAD29DC986BAB0074B634863
-:107240005DB438A1A590F1D1C21D5B6D035418DF68
-:10725000FF118C7F0A1289295D4EED71A2DF28E0B3
-:10726000A9DA31DC067EC6DF9B634808D62F4AAB1D
-:10727000959DBFD4264B941FFC9CEE6638DF7C2383
-:107280001EFB9BF734D33FB3E958CB295EFDCDEC11
-:107290007E4BF33CE67DA696F7A3F89EF704B5E88F
-:1072A0002AFB7E05A59B7FF9E3984F6D9EE7EC8056
-:1072B000F93E4B0DF55F35A7EF9CB5C6F7D5CD4F21
-:1072C000623F7389BA1EF206E7359ADF577E017E68
-:1072D0004CB5293FBB53E8A7D1640CE8A783F6CC93
-:1072E000C468E73045D9B1D285CCF9E54A3B96A7C9
-:1072F00056122C5B0A18DF2E697EEF11E09F9ABDB3
-:10730000BBF0FEA143C15129D7D34F263557E27EAA
-:10731000E124BE8F7C6FF7FB34E30A69FB890ED34F
-:10732000F9673EEF599C0EE23CF42C986F113C57E4
-:10733000BED1CFE7FC914C07FA43853CFF660C9D1C
-:10734000977CEDF312F311F313EF97CA94DFA2B415
-:10735000177CDE52C0E216739BA635F4A7A858B37B
-:10736000FF0B5C2F13D37D7A13EC4FB6F27C33C343
-:107370007D79F4EF28C8AFE0B76AE2C5FB43CD7C66
-:1073800025E84C1CD600BFEF18FDF82E7E6AFE09DA
-:10739000E245D01B6EC6D3DFC744F9CAE037533E7F
-:1073A00032D4E7351AEB67AD6D1920EFD5A6DF476C
-:1073B000386BCA2F11A5A7D083F23757D5CAE11C65
-:1073C000CD3CE26B6079B8EC1CDE29A5F1CD1F82C3
-:1073D0001C363139F83BA7FFB6425F6521DA2FAD85
-:1073E00008EF415C9D2EC345BFB3D74B2E90AF39FC
-:1073F000F5C3F13E9D62A2617FF7F6E0872D296417
-:1074000074A8AAB3121B359E55740CD073557B64B7
-:1074100071CF95634A5FB8B785D163E913BB6CE957
-:10742000B45C5057CDFC8320931B718FB4E03FA117
-:10743000FF17AD3F80EB70BAFE30C8572D9C8B28EC
-:107440000239363DAFBB19E9506BF213AA057F7ABA
-:107450008917F8D3FF88D30EE7AA7A9B37E91E5F16
-:10746000C1F8CBF923D9E83F9E57D57EF09D3F81E7
-:10747000DD5B2F29FE31F09CE20BED5478553CDEAC
-:10748000E37BAC53262ADE37E21F03E7DFDBFE3A5D
-:1074900008F76305BF8AF9D6DAD723BFD612E3BA55
-:1074A00072365DC040DC74F6F664CCDBA2FD17EDED
-:1074B000057F63BB15FD8900599606F74CF81E63DE
-:1074C000F7D056ED4DC2756D553DDB6FA9DA91844D
-:1074D000E766E9BA12EFF716F438563FC1968EF414
-:1074E00072E33D5964AF91CF059DBAAF0B4D745A0D
-:1074F0007BE0CD34B5FB3A5147A7F61EE864B89F50
-:10750000714B21D78F9C4E6405D73F0F1CCE867DD3
-:10751000A6F375B15E39CA7AA3EBFEDEB9D7637EF6
-:107520009988C755F417BF27E0ED0B74BDB07E14E2
-:10753000D2CD4CAF8A7FCE41BA90BF3A09C469EF31
-:10754000CD24F74FA7CFEF9798BCDCBBA6B202ECD7
-:10755000F9AB85CCBFFA33D55B5A2E5D0753BDA579
-:1075600051BDF501D56750FF70651AD6FFB252C5FF
-:10757000F293957958B673BF5FC81165041BF8592B
-:10758000AF73F979BD50AC971E4A03D7A2E29F1F93
-:107590008CB240E83370DF8CB24184DCAA19EDE193
-:1075A000CCDB8DF6AECDEA2A87F3BC8127D87D6887
-:1075B00055BE1B0CDF1345B5C13DB8246F44E439FB
-:1075C000CA9B6A83F3E8774D4E367C3F63ED0043F8
-:1075D000FD834295F995159986E777CF2A30D467D0
-:1075E000F3FB5C893A16E5E6219E374AC8584617F0
-:1075F0009E8FF24DDD987EFF46E1FDE61D2BBE37E6
-:10760000D343D075EE6699F8697F733653FD4541D3
-:107610006C6FA474A2EDBEFAD809674748C38E11F7
-:10762000EF8EA5F5633B58FEEAB1FAE49F82FF7442
-:107630006C476A02C451FD0D32F7335C78CF99E88C
-:107640007742FD2ACC53991D8CC17308B35B02CFDE
-:107650008B3AFCC400BA78203747E5604842FAB15B
-:1076600038C0CB3118C73F45FD3A571FB83F8CD4BF
-:10767000430907A712E9FB7FB4A60641AE2BFE29FA
-:107680006B69C04F2FC7F27D1A09FBFBF2BDEC6D91
-:10769000EB90BFD49D2194DF185C2FCC6963F3235A
-:1076A00052F100A0FFA924A2255120962EFBCBDF8A
-:1076B000144AA78539AD45704FCC2C7728F54EDAA2
-:1076C000AEA3C9CAEEA5A7FDBA687DE9AF63B6321D
-:1076D0007DA2F5837B2222F80C16C1BCF3FBFB6272
-:1076E0008652FA7D393F58847A6D452ACA9519EF3A
-:1076F000ED363FE23700722045F46444CED8FE1BDD
-:10770000556EE9A06FE658BD7DC15EB5AFB7B27BDF
-:10771000E1142D611A9E33DD8D7CDCAEA8E530EFDF
-:10772000F6B56EBC4F478C5BB55ED6D87DB8942F4E
-:10773000E1FB0DB21FEEBF11762BB056F2C33D39FF
-:1077400066BE79F0813198F76EF67F457996CAAAC0
-:107750005FE7472CDA2FE3EF5890916DCAED86FB77
-:107760001DD9EF7D10FF58433EEA12CF1FFEE6B051
-:10777000A05F9308EB8ED34765E4B3D39EC6D1696F
-:1077800099905E7270F4BFD1FA57530227E15CED15
-:107790008383FD2301AF8B2DEB3360FD74AEF9C401
-:1077A0004FE1FED82F7F63F5C2B08B5E5E3818E3E1
-:1077B000F4DCFFEEAEB7C4FDA45A3ADC17B458DDD2
-:1077C00089765CDD211136FF20C229ECBA6B9384E7
-:1077D000F7049D18E55C07EBE539A6735D27F8BD56
-:1077E00015E543993E11F6FE315E9F63617C4DDEE7
-:1077F00090D8BD52FCF71E843D10FA5AE8FD19439B
-:107800003D2C9EC1F535213B516FCD87DB94E83C83
-:1078100097BC14C3E2CB2A5DE08FC67B4BF16FE3CC
-:1078200050A62F16D97EF30CC852356945F8BFB45F
-:1078300006E7B7BAA1FDD6FA3ED8DEEAC5782BB77F
-:107840002F70AD3DE8A56A2E7F4B1B25BC1F8970AC
-:107850003B398FF74F5EB246EC86278A7D31D9954A
-:1078600079DCAECE23A6786DA3D1DEF9E2D9E2773A
-:10787000111D17EC67042EEA3F53DCCDF707DF9CA0
-:107880008A704BDE601438AA493804F7442DDDC1F4
-:10789000E2D766B8CCF3B85638E77BA74D4C1AA9A7
-:1078A0001BD704B7C037067C757410789F1F60F82B
-:1078B0009CDFCCF6033EE7FE1AFDC338B399FED534
-:1078C000C43715F2F3AA3751FDE98EF083E08385C2
-:1078D000BB82B85FF115694C70503958B279D78CBA
-:1078E000EB54583FBF87EB90597D42D99624BA2E6E
-:1078F00008BCFD4CC5A0DEE3F5FF2A3C117E6F36C7
-:10790000B6A37899D7C4EEC5D67DC7F3D00388AFA8
-:107910000581800DE2990B787CB037386B1576EED7
-:10792000BD7778191EFFD57087861AFDD8887F9499
-:107930001D75BDD5E517F5628F3FB58606813D0EF5
-:107940000F52D01E7DA378FF529202F6391BD70D3D
-:107950003DE9DBF9DC2ECF033B4DCB939B5FC17B35
-:107960008F3EDFF40AEE8FDA7E332F01FCE5939B26
-:10797000E7FC14CE059CDC3107ED72F52F845DF633
-:10798000DBF4F67EC2E6D9BFFC11F0E94BB118D7A3
-:107990009FDFE2E7FE38D57FA0173733FD4736314A
-:1079A000FD580DF6AB10ED572E7CF7C87C7F2EF0FE
-:1079B000BBEE39DAB547E6F8C7607BE20AF1FB7B3C
-:1079C0004360BF847D1576F7DD74FFD9A16017E4AD
-:1079D000773EFC019DFF99DD32C67496CA5B33E0A9
-:1079E000F7507AD2E3DF1FDF962E7CBBAF01DF5565
-:1079F000806FF48718BE8FAF65783EB19EE1BD61A0
-:107A0000476602AC838FAFCD443FE8F88E6CC4F775
-:107A1000DC7514DFE807AB463F682DC537F8FF80FB
-:107A20006F3A6E558BCAF1ED65F85ECBEDD07A56A4
-:107A3000CEED86D7C07DA0571EF9558C17EFA18ECD
-:107A40000DA5C23AE5D42E9940DE42979FC4FD1998
-:107A500081E77F90C6E7C1AFEAE6DF6C882110DFDF
-:107A60005CF8AA13CF0D7D2995F403027434FE212E
-:107A700001C68B8CDFE5D7788A46E9FC9A6BA44F68
-:107A80000DF1615E7F4DF31F3E06BF1EAE1D827578
-:107A90007F8DB82F62AFF1BE0849059D86E747ED9F
-:107AA00076E08381E6FB34FCF8FB3017B3BFBE6F92
-:107AB00019CA733847BFBF521B17B2423C2ABC4B8E
-:107AC000427A2F7DA824A184C0BE541DC231BE8835
-:107AD000AD2B244DC338630CE59B38B8AF0C2ED1C9
-:107AE00085E7AA8BC51DB7D0719D1178CDCFA78230
-:107AF0002202FBEE881EB7AD2B627EC052D982EB0C
-:107B0000902536B61E11F921B7F2F7B716B175C92F
-:107B10001D452CFFE21C2413D17ECF6D88E7F9CEE2
-:107B20001331FE29EE0B5004DE5CCA59C3EF27F077
-:107B3000F8C2DFA00D85736E0C8FFFC24FB6D0F672
-:107B4000F7F0F6F734FE09F7E5E84AE639B0BFF793
-:107B50002E8FF1E2FD8C701F1CE5BBC7E3D83E0AF7
-:107B600049495440AEEEE67AF69EC6277D608FEE18
-:107B70006D8CD7A0A4E304088FB78E847DD8FE3621
-:107B80008CB7CEB2B7FD06DCEBFBD34E3C6CA753F3
-:107B90005B6561FECBAA3E04F36B8651371EE2B7EC
-:107BA000F4D59E2BC957E31F633C7909C475AF27F1
-:107BB0008CB1C6225E0D758A5FAC3714DD70E7A606
-:107BC0007184BC4FD4A140EF25801BE087D9891870
-:107BD0001FB815E2CB7DA05490CFA62B246061E5A1
-:107BE0005A07DE87C1E2CD53F9BCEF184B428974C6
-:107BF000BEA1B78821DE7D67C812CAA574B8550931
-:107C00001D00BEB6D8552BAC0F7C155231AC9B97DE
-:107C1000ACBE36787F5E547EE7A681B46E61FBFF12
-:107C2000E11F48787FC93D54C8813FEF53488B5CC2
-:107C3000CCE807FC57DB87DDC71D7E80F1B788B332
-:107C40000B3A0DA7DDEBF17B0F878FF6B33601DA28
-:107C5000DBA2C797B673B9107EE7622EAF8B05BF64
-:107C6000ED30CAE961212FE0E752BCDDC3CB9EF8BD
-:107C7000FD20E7F7839CDF77168975F8B58DB7345B
-:107C80008684F4BFD724C6BD9597A122E63F0B3862
-:107C9000043F131E9FB250CD017CD4DEB806FDA672
-:107CA00005A67831D1C7B1E468F52EFD63B902A508
-:107CB0002D3C17E0916E8AF5025FDF63DB99CDEE14
-:107CC0005F317E27F6716791562BBF8F8CC5B9B88F
-:107CD000BD2A931D784E7F96C4EE5F3A57E20C584A
-:107CE000A8BFF829BFFFE47C1D3BFF3AEB07EC7C03
-:107CF000E7BD898F4C05FF7056824D81F253FE3BE4
-:107D00004FF79356A7DB1DF14F1A4A647E1FE8BF59
-:107D1000DD09FB196B40AFB0FAB3DA388C2AF1FAFF
-:107D20008ABFC0FBDB2F513EC0FA8FEED4E8B8E724
-:107D30000EF3F7015A87FD92C7043FAFC6FECE3D52
-:107D40002DDE37B0FA13E2FD93ACFE13D13FAF6FD7
-:107D500030BD5F657AFF7356BF50F4E49D70CE71FD
-:107D600016DFC79975BD847AA518F88DD277D6EA43
-:107D700010E27996E5202B4B4908CE5DF4F6DDE064
-:107D800061BEE2A254B8D7A2DD09F63B77B886F50A
-:107D90008143FDFF04BBB6689A14B081BE3C1ACC87
-:107DA000E1FA3D6ABE7631E7DF415ED69FC037ED2E
-:107DB000276658EA77EF6707C035CAD08FEBFBF428
-:107DC000B3BC3B3CE9DFA79FCF4CFD08FFE8E16275
-:107DD0006D24F44726DE6088FB2DFEB13711FC2BA5
-:107DE000F22EFB7DA5C5AB77668CA0FD2FFEEDBE08
-:107DF0008CF9BAF5784DA74C34AA8F6A3B252CBF75
-:107E00003AF0890DEE1FA8D973C0565E08BF0B73F8
-:107E1000C0364107D71291874ADA94E93AFB7EDDF2
-:107E2000300BD71BECF76516FFF634EE772EB6EC69
-:107E30003CF90B88035DCFE272E6F9B979BBBFC1AB
-:107E4000FE7314FF7DFC30A68FE68FD46E1A06FBFE
-:107E50007B80335A4E58137D1F7F2DEF6F561CD3F6
-:107E60007373463BEDD066D451FF1A381F367F8BB3
-:107E7000BB18E2BCE38796560CBB6ABC34CCE2A5C7
-:107E8000CD2C5E3AAB4FEB4354899335BF7BF95908
-:107E9000FB8D844C7A9674DDF30B71483C2E8D7209
-:107EA00077E0CE890331FE85F5F9C35E7F3640DB8E
-:107EB0001FE1F7FEDF3B66681CE8873677BCC545E7
-:107EC000E5B9BC70F61A80E3DE313796C3F3921839
-:107ED00067CE6C167747BE282FF4DD07F386EF21B7
-:107EE000DEE1B7B1F897FF6D19E35FFEA2787FB4CA
-:107EF000FDED591C0F6B8631FFE58885C2591C8149
-:107F0000438C4F1D96875A697FEDABD387C339BC2D
-:107F10006D8525AB112F7CFC6D85FE5AA88BF1E990
-:107F2000748BE0F9B5C2B184C3B11ADAD27E7CE3B6
-:107F300028BFE9D68DD327C61BEAB74F4E269A3EF7
-:107F40000E7BFB00437DE6AC4CC3F777CF2D30BCF6
-:107F50009F12D33AB2EE3BF8C1B54E671CF8639F4F
-:107F600035FFE3A37BC0BF6B92F1776A16EEDFFEAD
-:107F700011FC6ED3793AE1640C86AA180FFBF20863
-:107F8000FB1D4EEAD729FA7D9D33A4F519D807D5F4
-:107F9000ED1744DD4F15FB058B5D2D98C7F7BFDD51
-:107FA000D7D9368CAF878B21B519ECD2871887AB20
-:107FB00071B0799DD9770C7FD702F20AAE503EBFDF
-:107FC000191AC2BD7A9DABF0F7C226F0DF139E00EE
-:107FD00097B0C3BA60E0030A9C6BAFA525D897722F
-:107FE000AAA712299FB41E2043F7405EAFDB897910
-:107FF000174B3B6FC338F791B840E103F4BBC56B37
-:108000002BB15ED3198FFDFE596E2DC7FCEDDF4BF2
-:10801000B89F3065C0BDAB017EF8FE413ADE94DF0B
-:10802000DD5C0178AAD9C3F233A6C8EF8F847E96AF
-:10803000345662FB29323922517F21B1F31EEC778D
-:108040000AD87A5A97473BD781FD956DA19C7F0747
-:10805000BD6273A25EA9ED8CC5769326303BFD36DA
-:10806000D71BD636065759E7347C2FE8DF3ACC6366
-:1080700038776F4D6D52E03E4F6B9B84DFDFD259F6
-:1080800080A598E7DB79BFC2DFA1B2A67E530EF9C7
-:10809000996FA7482E743F4C7AF742DD98441245F9
-:1080A0002F758DD3C9F29D633A59FE73EB70ED24A1
-:1080B000C8D7D4156D0AECEF1087DD05F89A3A762B
-:1080C000B83A5F274FF2C1BB6C4017EBA6F76C6064
-:1080D0009763683941F77EA9C8EF37E9E58E6116E5
-:1080E000EE3FAEC2F90A3B438EEC457EBC4F9C8FFF
-:1080F000E5F2F209FFBE0B4FC0EB40C75763703D7E
-:10810000757AB8FF0AC0DB5AC27EAF8628AD19B0B7
-:10811000AFF2AF829FD2D92EA1BFDFC67EFF77AC70
-:108120006A81FD02C52BEC0B935B318FFF017C0252
-:1081300054430080000000001F8B08000000000076
-:10814000000BC57D0B7854D5B5F03E73CEBC92992B
-:10815000C9E43D210F4E208420012643124208C964
-:10816000242408486080AA840699208F8804424409
-:108170001BAFF6CF842410042D8AB7372AD2019181
-:10818000A2D53620B6698B382168E3B5D7467BDBAC
-:10819000E2ADB5F151048B3580D72FB62A77ADB556
-:1081A000CFC9CC9924886DEFFDA37C27EBEC7DF63D
-:1081B00063ADB5D76BAFBDC37ABB184B60EC163B54
-:1081C000E33F8DF18C253176719A8E31F8F5572287
-:1081D0006BECCC866749499F3B8EB1EE7BA64F176F
-:1081E00065C6AEE04F0954711AA81EB30F7CCE725B
-:1081F00019DB7C3252BE4F60AC3216DE013CF0829D
-:10820000D17F309DDE33210E9FC68302946FB60D61
-:10821000647A2C8CCD79D11C6053A1DD17CD1283EB
-:108220007E3A72BDF1CE787C3FB15CB031E63E6102
-:108230009418D41B3BCD9DE0CC83364719AF3A9EB2
-:10824000F027633E3EBEF2593A96CFD81D26FED99E
-:10825000DC25822F2A8A316FFB7CC660AC3583CB4C
-:10826000189BCED8EAC14882BD7BF8FBCBF5897359
-:10827000198CFBF2BD306898C7EA7B8529C7615E1F
-:108280004CB63A27001E2A93576E6330CE4A5147A8
-:10829000F3AD9C1CED6F81AA1B07A3E9FB4A91F586
-:1082A0000A318CD50DA653FB9B0663E9FDE64133ED
-:1082B0003D570F4EA6F7C64191B9015E33283037BE
-:1082C000C037CCB1FA7430BE492E6F05E2A3B2E5D7
-:1082D000FA79D88F775B52AE17F0B1E8DE7EC90429
-:1082E000E3621683FD49E86F51418E639D2538EFA7
-:1082F00096EE2A1822B41BE731B8E1FD1A78CE09B0
-:10830000295F0BA8EDB42026EC731360DC8B5AD3E5
-:1083100075F7B160F90227CC07F1CD9AE9B948ADFC
-:108320003F0AFE6728F5575B021374D09EBEDEEC51
-:10833000DC06E3BA1427CF45BC34ECE4F86BD07B01
-:10834000E65861DC0D8F084EA00CBB35DF6A623049
-:10835000CFFC33F5066F76B0FFAAC1A94C063C2CC2
-:108360001BCCA067C914EF72C443CDE04D0A9DA693
-:10837000D293C9053A1CCF56A4AB8C032AE074569D
-:10838000C6F749FD8CC46F41FF9FFC524FE5796EE3
-:10839000DF2D381EBDDFE83C00E33967F68A48DF91
-:1083A00073A9CCBE1786784ECF7C76A0D7AD1D22A0
-:1083B000F341FB6BE0E985E7B968E68E76213E6123
-:1083C0009E59BCED2BF0EFBFA53D696C3CD0B7E1E9
-:1083D000776F4BE318BB2DB36F6A00DAAD2E0DC477
-:1083E000DF0CED5E38A477FAA0DF8DDD6FE4EBA043
-:1083F000FCC37477221381AE63BC0DC8CF1B96FA01
-:108400007FA807F8F6FB9FB3CD9483F8EC94021392
-:1084100024F8BE13F0E8837175EE16E7F9895E2C37
-:1084200072C994205FAB7C1CCEDF1B06C7137E2E67
-:10843000D71BA71C47FE057EC5F7750A9FDF8E7CFC
-:108440000F4F7DFF7C852F39DFABFC5C274165F842
-:10845000AECE12E5F7C17C2A7F04FC0728DF747CCE
-:1084600089A714F92E4B704E80C746659D548A0724
-:108470001F2844FEFF38CED902EF7FD2E400640506
-:10848000F9BF627009D58B1AFC26F5A7F2BF51E13E
-:10849000773DF27F08DFC3778CC177F7E5789F449B
-:1084A0003C95FDE06FCFFD17BC5A2005321F8BC3F2
-:1084B000A795F827B80E4CF627D3691DC8EB42F8EC
-:1084C000483C556590015FFA87DFA1756084E79CA1
-:1084D00090F24DC8D7D988997E69A935F8FE6927E9
-:1084E000977FD7CAFF1D0AFFCF33B2551E6C4FEAE4
-:1084F0004B0B6DEF7C4ED90B388F534E81B7F74F36
-:108500001A37E0C984F885F1BB915E8B0A64DD7D82
-:10851000E9D88FBA7E399F7CD5F87FE4BC3679FFE5
-:108520001B45DE87CB7706EDA17CFFF885497E945D
-:10853000FF6F33D00700FB4E44CA4F2AF29FF4432B
-:108540004494FF6AF27F5DEEADBF413C8D20FF7F1A
-:10855000FB8FC87F95AFD4F5A2AE0F753D84AF1FDA
-:10856000753DDCB0CB19F52DA41320E6495C3F9294
-:10857000EF199C479D1C9983EB525D479B8E0BB472
-:10858000CE86E90565DD04D789564F8CB64EEA9450
-:1085900075B1565917EA7AE8113BF716C277753963
-:1085A0005E634EC8BAD8782C5C2F8CCA570CF96A17
-:1085B0006D5C3D43BEAA8367285F1947590F969C9F
-:1085C000AFA70FFE7A8DFC3436C740EDFD2FF2D3F6
-:1085D000D89C91ED0919DFFFB3EC89CBF5BFCB95A2
-:1085E000613C977341CEA607F9ED865719B717C6B8
-:1085F0005B9DC83FBD117C9EBD86547F0BD6BBC220
-:10860000EA118FAAFE5F8B748F0DF269B5CB5B8E7A
-:108610007456E9DF1BE1CBDE927DED7436C6F519A9
-:10862000DCD948EF3E8DFEAF1B85CEF373BE9EDCDA
-:108630009B91736D745E91F34FB713D78E4457E6D9
-:10864000E6F640902EC66564BF0540A109A3D35548
-:10865000DFC1F1AEC26D0149D5B7B1A86F815FD658
-:10866000E5FC03F2A7720EFC3A06C11797BB8B809C
-:10867000EEDF5160D6B31CD7E14D056A79A0C32D5A
-:10868000A1DC81DF0BA9073733117E39ECEB3E53B8
-:108690000EF56FD83B54EEC3F28AA228A53DE6162C
-:1086A00058B07EDBD1936776D33CF6F0F5EBED97CF
-:1086B0003C5342E05C80AD21704118BC8FD7B74974
-:1086C000FDCC4EEDF8F97A85F60517E71F4F883D8A
-:1086D00002949C1B8DF6E471C17E1FD07F45D1C7EB
-:1086E00006A45770FEAF2C77A780BC3C2128F07FF2
-:1086F0009CC1F9AE38CEE11F1C7DBDC32729ED0119
-:108700009E372A68D6770A6E11DADD5820F8C7A599
-:108710000FC7F30F86F8561D07A860EDF7CC10F7CA
-:10872000F5BEC7F54DDF8FA3EF03C6AFD1FFCD4533
-:10873000CCEDB70CAFF773558E7E0EB0DA3EE0721B
-:1087400019CCCF9F3DBC7E8F52BF4FA753F075B65B
-:1087500003F9A7CFA0E2F34F0457300EFFC7D13F74
-:108760002DF771BE65EEB0F95F6DFC3FCAD1DA0B33
-:10877000F8236BBF0F5C0D7FCF0FC39FC23FB55A6D
-:108780007E8A923CA72F433B5171821DEDE24D1E24
-:10879000F36EB4FF83FC3140FCD1676643FCACE56B
-:1087A000FF8BCBCBB3C9FE51EA5FEE40F9E6D10DAA
-:1087B000D5E7EB41E52FF83E0BF8094D64FCFE834D
-:1087C000A3973A7CD9441F2A2758BACA7AE80C835F
-:1087D0008BC2D68FC2FFB47E51CE037E268C20671B
-:1087E0000C2E8EDF8F04B61CE5645F19B713FBC631
-:1087F000F167A64B20BCD95C1C8F09CAB32F220499
-:108800000F29413AC34F00FD909079139EAAE2D4FC
-:1088100079C7562DCC80EF6378B9EC8A7AC4971269
-:1088200084C3DB1BE78AAD42BC04DB8F7E13E552B9
-:108830009582B74C57CC9B0A5F09B82EEB884180D4
-:108840002F8E0B3E11FD04E48B11E6FD97E17CE5D4
-:108850000BFBDEADBFCAF79F0C5F97EEB0EF993E02
-:10886000F7EB7CAFD06D61185DE785D1B53C0CAE00
-:108870005661BF46FEA9727175D7836D09308FDBD3
-:108880008F08A86642F839BD0AD7E7ED76957FC70D
-:10889000BD89FC1AE4E7F184E7A59DAA3CCC78C425
-:1088A0000D745B82F2B030082F437941F0842AF7CF
-:1088B000B4507D91F908CACF9BDBD5FA13A9FE8A83
-:1088C00056B5BD2C82553A32DFA42AECBF2A57D1C7
-:1088D00017BEEBDEC4F20D27F8F755C726BFE9CB6C
-:1088E000B8CA7AD81386977D61B02FACFEC35FA15A
-:1088F0005F5AC3BEBF37AC7C7718DC1106B76BBFBD
-:10890000AF5923D03AAC017E40427CD5BABC4D5918
-:108910009743F480190816B2DB34EBEA86160EDFB3
-:1089200071ACA0AADD1202BB0A69DDA8EB42CFF848
-:108930008F318ED1BAD08F222F6B5CA3F06556B8E1
-:10894000BEE5E57FC45F93D00E661ABBA047D4C2D4
-:10895000DDA23AEE796F6ECDC6972A7C7D15FA07B7
-:1089600037FC9B765EE0AF2A704555794A885DE218
-:108970002BAF7287CC53AD3FF78B2B22F6B7D35575
-:108980005E7508DAAF2E0B4CA8877AD531FC097AD0
-:108990004D44BDB95989C7CC7D41F4A05EAB8E086A
-:1089A0004C68C80E9927EBCCC47976DF23127D7C06
-:1089B0002D401F8CAF317030C135EB8E8A6A3C0C74
-:1089C000F57BEE111B518FBEDD189B80E33FEBE280
-:1089D000FE424FD4D884B5007747AE32C850AF7B43
-:1089E00047053D4F89EEED03B0D6BE7F6C599565C6
-:1089F000129647117E9E702DAE6A06BE3EEC92E93D
-:108A00007B6F8C3DA10BEDE7FBF4EC4919C7E3DC70
-:108A10004F7C73BF3107FDE79AE6C909684FAEFE88
-:108A2000D7257393A0DEEA36BD53A07A6C2A8EDB7D
-:108A30007B5F8501CBD7B42A4FDFF5F47CF1CB27E0
-:108A40005A6C507FE071C17910EACFFEA4F3D5A92A
-:108A500000AF6F1FEF44D29C1CD4313BF4F36EC7C0
-:108A600044BF08FCF89EB9FEE545BC3EC3FAEB3FA7
-:108A7000975F5B948BF545FB36A87F16DEA33D7CA4
-:108A800076A77850C071D9AC11024CE9EC17F26BA3
-:108A900068D742B97D1BBC3FDB765B02DA596705BC
-:108AA000D926C0FC7B8ED55439805FD67718157ACD
-:108AB000D624D5C0FC6B7443FC42FA635D34877BDB
-:108AC0005C35554F227E1F9968433CCF9AEE3EEDB0
-:108AD000023C9972DD2FE1F33D33D7532F7E29AE4F
-:108AE000427BFCE717562760BCEE57CAFA3939B803
-:108AF0003A617588BDB3EE2389E8FEA241DE8AE3C0
-:108B00007C312255407F19E81EBB04D6EF1AC5FF01
-:108B100000FE6D7C6E04BBE76997487CDFBD2BBE11
-:108B200048D6F0713DC94FF21B00EE3FB6F1111F60
-:108B3000C8D7F78D8DEC3D5C7CF742C14C78F69838
-:108B4000297EA57FC6EC37A763FCD33D17F9993979
-:108B50003A33975A43D69D52FF0F3E2BD5FF03D48D
-:108B600047FFED0FBEDF5B9965B81DBFDE66F5A15F
-:108B700031F181D52A211DDE969ACEDE0DDFAD7B47
-:108B80005C4F727FDDE3F1F70EA0BC017EC1F858A7
-:108B9000F8BCA64CD713BE465D87BE6F6BD721FBD2
-:108BA00036C9EBD1D6E15F8FDD5B75C832FA3A5C2E
-:108BB000AFF829731FD77B701DADCFB34A0CF447B4
-:108BC000D9E32F3D89FCBE7E8BD9658481AF7FDCE4
-:108BD00048F4EAB75A7D7628F7DAAC52343C4DD3E4
-:108BE000397DAF9BCED7CD1C914926173D5B314EC9
-:108BF0007A09C6130BF0F9C6BDDF9D01FD7CC8FCE8
-:108C000037CD00FC5D4282015E2E1D17297EC824EF
-:108C1000B75409F2B19671B950F7CA738652F8B5D4
-:108C2000B67EFD42F4EB6EF3EBDFED577CB62BCA5C
-:108C300034519E6EE6AF40AF6ACB37B3DD17C5A99E
-:108C4000C4C6065C8F759D61E5F5D77F80F197CD31
-:108C50004C7AB75F8DD7C238E4E9D6B8B39100B883
-:108C6000980B30C42ED5EB33194C71BD05D615CCFD
-:108C700077CE3E81C6BDBE51F41BA1FE9C581EF7A7
-:108C80007DBF09E83F91E6EDB303BCFE61AE67D658
-:108C900033C16F825FAFDFB745C2F5D081F205E324
-:108CA000D402F3207FBF6776A6A1BFBEEE7133E189
-:108CB00077FDFEDB7EFB087CD7DF5C1917EA1FE738
-:108CC0002B7C01ED33534CB09D0F9ABF9D86FC3F2A
-:108CD000E77BE0E7C27CD747B31F56A523BD92D2FE
-:108CE000644BB0DEFA6DF764F27AE027C3BC6B76B2
-:108CF0008A340FF6BC91F41EAC7507C965059F6BED
-:108D00005A5F3118B2514EEFEE13A1FEBB008B1625
-:108D1000C2974FC1A301F1B50ABF4DE2DF38F2158A
-:108D2000BB5B2639E2C5F955EB84554B49AE0F18AC
-:108D3000685D4FE7F1CDAAE9DC9EAD4973DE427173
-:108D4000E4078C4E9453F823AAE300BFAA4ED7B78A
-:108D50000EE3B9ECC7468A8F6C6E35BBCD36F23B5D
-:108D6000DCC7707C12930C808F8D3297176B143E8A
-:108D7000DC2C2FB91EF906CACF48B8BF62E572B124
-:108D80002E1AF0CEED54B70EFAF9187F1BCFDB4D3B
-:108D90009A1AD2BFA0BC8776645BB0DD5E1D6BC73C
-:108DA000380BD69F3415F1187BD3721CDFB322AD7C
-:108DB0006798FC030568E73D2B4E47FFB66667CF13
-:108DC000DC0E848FE6D8B1C99A1FFE9AF4C6ED0A6C
-:108DD000FDFBD1DE473D02F051787E7B3AD7FB5E4A
-:108DE00091C77DBEADE049E503B5BC6EA79EC7DF68
-:108DF000DB8C64C7D435FF8EDAADB3F625A0FCADAD
-:108E00007B5E9F8F72DAA78C7B75736AD119E0AB9A
-:108E1000D5FA28BB00AF36FA2A0D086FDC23101CE8
-:108E2000FC2E3E0DF9F4CFAD3FB121FFBC670E4CD7
-:108E3000407D34B0C5EC3C881350E26E7F6E9D706F
-:108E400010E3336BEC7D5601CAD76C1D1F83F2FB18
-:108E50006D7BC080E56F77A6EB1076DBED4508BB38
-:108E6000A56904FF1944198F2B31F29F37099CCE55
-:108E70001B9FE9318C83FE9E54E6FBD1B3BFCE44E9
-:108E80007D5597D697897A05F8203319F1FCB440BF
-:108E9000FA78D333A2DB3C35C8079B900F60DD6DB9
-:108EA00050F860D3F19F7C0BD7C326A4BF6B381F4B
-:108EB000019F9EA6F7C70ECC65FCFBD3C827AA1E50
-:108EC00003B8558FF1348302433F081F9ECED7135A
-:108ED0009497F3725F36C953D66F40BB737397DEB6
-:108EE000D71FB2FF331A9D7B143AAE6E3692DCED7B
-:108EF00051E6DDBFF3791BD2F1A3677B5EC6FD921D
-:108F0000BA63A0ADE511D6858297CD88071BCD83C6
-:108F1000EC8BCD386F5B100F43FCAFACC7CD8CCF63
-:108F2000539DF76649C1835AAE7C7F5AE19B8D4CB5
-:108F3000C1DBF1897CFD29EB0DD733CA55757EDE87
-:108F400018FEBDCAA7E715BDF08632CF8DC017CE7B
-:108F50006CE21FB741951350F4D1D10314FF51E9CE
-:108F6000A58EFB6F417DE28E8E09D2B15FC76A3B51
-:108F700047889BBCABE0EF9DB6C4B42EC0DB9FC15D
-:108F8000CF427B0AF9550AE94FE51BB5BF393F5877
-:108F9000B200E70BED07B07DB5DFB77D9112B6F3F8
-:108FA00036E3EB03F913E5A7BA2EE7B4AC5C9063A4
-:108FB000C37A1F59C767E37CB95CFBDB743B3DDDBB
-:108FC000682FC0F7EE2E81E2CFEF287EFD3B6D3F8C
-:108FD000B1AD0EC1D367CAB8553EC31F8C4BA9E3D0
-:108FE000ED8DE1F1DCF071AB72481DF79C1D372F60
-:108FF000C0F7EAF8557E55F953C5A3CAA7ECDE7849
-:10900000B26BC2F995784DD5ABA246DE937EBC3EDD
-:10901000E5A2C16B19FE3E1C56EDA1F7304E83F25E
-:10902000E329D14FF2A3D5713A2344CFC38F2554FE
-:10903000EF346FB9DE5E8AFBAFCF084E347942F46D
-:10904000CB6E2944BFA876C12DB9E3B8BC8F739FFE
-:10905000473A6E3CD737D72607EDD0D99F04C428AE
-:109060008C4B1D4F7785EAD38D174E13FFD7B1BEBA
-:10907000EDE847D5ECFC75E50CE4F3A7F4B43F53F9
-:10908000D3566140BBFEB6276FCD473E7AB77D3CD5
-:10909000C9F5F387F2A6135F317BC24DC0FF6B0E9B
-:1090A000EDBD6905BC5FD3253A49BE433BB86E6B45
-:1090B000EE9CCE906FDE33F75716A2FD7EB7684761
-:1090C000FB7DD69379F762FD59D6B1D1380FF7A160
-:1090D0005882DD5214E907D5EE7D5B91932D7ACE4F
-:1090E00017F372F97A2A197A727E9BD3D29289FB8E
-:1090F000E90307403EE3BEB241EE0C607F2F2492AD
-:109100007FB119DC2107D0FD9CC0EDB25A03332595
-:10911000B9E8BD2909DEBFA2EFBB13F5C82B775A0A
-:10912000739A7100E2E7F9ABB93DCDF70F6379FFB0
-:109130002ADED4715CAFF41FDE9EFA7D2FFA11286F
-:109140004F95F19F6F7DEA26D483E78F4C88C179D4
-:109150007FF082B91DEDA90FF45C2E0EF9DB7EFDC8
-:10916000FBA1761AD8751A18EC380D0CFCFBBED68C
-:109170002EDCC6ED8B5CAD1DA7F27BF5960951A1E7
-:109180007904E1F63BCB08DFB79911C5469037EA81
-:10919000F34213200A1835156D7AF8BE3CF28BE7BE
-:1091A000FAD0DEDF63B41B619EEF23FFE3BED4F38E
-:1091B000A21FF761D036C7F5F0FED11C3FFA91EB44
-:1091C000DEF2CEC5F64F3FB883F20CD6827D9928E9
-:1091D00084D8CD0F3F7813B2FF25A7777B127C7719
-:1091E000E908CF8B80624B98BDFC7292FC8FDBCB81
-:1091F000D76A27ABF186ED88E7C9F0BB933911CF69
-:109200002A7E55BFE945E083025748BCAFA996ECDA
-:10921000E40B4D5E7A7E2CBCF3C02CE45F6B94F3C0
-:10922000207CF6F3AEBD6232D2F978CEE7E8F716CD
-:109230005AA2ECB86EFFD2D4489B8F179AEAE9A9DC
-:10924000D2598DB7CD3EDE4DDFFDA56BFA8959F0C1
-:10925000DD494B1497FFC3F67B383DC3F340EED88E
-:10926000322311DFABF3FAF06E4E5775DC1F1EB9D7
-:10927000D586F3EA7E2CF6C44CA46764941DEDBD3C
-:10928000F54AFEC7D90E6E4F9F33451D5E88792380
-:10929000FB96253090B36BBBBF7113BE5FF7826046
-:1092A000473FC0F9C2121BFA6B7F92FA6D767CC2FF
-:1092B00077011C8FE417511E15CE63B41F5518900B
-:1092C000989C4E5BBDC42F332F487ECC1BF933EEE8
-:1092D00053613CE4F3088A873065FF69ED4F791CE0
-:1092E00065C8BF55FCBB59CABCDFCD8DE1FCADBC28
-:1092F0009F53C0DF7FB0EFB945D8DEF9437A3B8E8C
-:10930000FB2F87F4D4FE06F0CB7430DE7347B8BF72
-:10931000B3A153203FF9FC11D0D730AFBA2D7AB7A3
-:10932000216A381FCE81F27E4B900F37B8FDC4DF23
-:109330004CE14713FC7765DC707E8C669DDB111F6A
-:10934000FF285F9E095BF743FC381A1F28F8C27597
-:109350008CFCA8D27B4307DF578FE9CC2945BE524E
-:10936000E9AFCA095F19CB42BDDA6260599887E359
-:10937000D34538717D2FB1C87A01F0B02CAEBF1C37
-:10938000C569451E9793E21C9D5B87FAA5C5487287
-:10939000205C8E5CCCE5765223F234FCB3E6713B64
-:1093A00042CFEAC90F519FA07752517F2F898CF984
-:1093B0006F19AA7C79FCDB2B2418FF925931778E28
-:1093C000778253F67CCB0A09F877C9F498E7C7018E
-:1093D0006CCADBC6CBA7C5E4E9016E6E6E5D510EAB
-:1093E000F0843CF7E7B9F1C17ED476E1FD157CFF4E
-:1093F000CC64AF2E2F1EE5BA85E4F4C7C2C0D4C634
-:10940000F460FDD705F6F6CF8520DCAF676968DF2D
-:1094100059B1ADF8D19F8BF2DC917979C3DFAF669A
-:10942000AC8DF2E77CBF3823703FCC63027A2D56B7
-:10943000F86AB5C912207FBE5D7F6188DEC847CE5D
-:109440002809E9BA48E1A3C552A01BBF9FC45AED41
-:10945000674D6442EDBB123BBAFC8685C7CEAAEDD0
-:1094600001BF7CAC87F9025F0BC09E8DB0640440E5
-:109470007235C82FE1C42F3EC3765B7CACDF4C74E1
-:10948000A8B6A3DC13985777059E7591B6A918372F
-:10949000A98B4CF323DF373CFFD16964AFDB54FB6E
-:1094A000C55B40FCBED5CEE7C3BC85C48F772AFC24
-:1094B000F84113ABCF80A5B7B8AFCF26C3A02F2CF0
-:1094C0000A64E27ABF9CE6CD453A7CB0AF25A5019F
-:1094D000F8E7A36346E742A87FCEFF1CC5E1362A22
-:1094E000F6283B14AFAC7B315002F57AD3271D44EC
-:1094F000FD529CC7F5F585F440DA3D2837D2B9FF17
-:1095000003F528CF6DDEB6EBE3B1DE85A33B32D6A3
-:1095100002FD8C12F35963E8C96C30EFF9D0760183
-:10952000C07A8045DACFF5537B58CF86FA5EBED538
-:10953000C1E3EDCC837245A5974A8761F48121A0F0
-:10954000BDAA33313D8E7F12DB67C7F5AAD2E9038E
-:1095500013E011E36726C023ACEF0A0C3AE4223E85
-:1095600079BCA541E86F8D45F85981F2E686EBC1DB
-:10957000270D88F2DA7DB792FC51E58E0CFF8D2421
-:1095800077BE76DC68DF9C11E5CEFA3C45EEE4B0B0
-:109590009C2BDC4024FAAE57BEAD10AB6509C71D4D
-:1095A0006F72623CADE1F1F1A46F58F67FB2D07AF0
-:1095B0006C5F2CD7ABE922E1FDB62E81F21B2BBBF1
-:1095C00092990C450BBB62E9691B4CA2F7E70FBFF0
-:1095D0009ACBE512A74BE5F713CB28AFE8FB13E9CD
-:1095E000A98EA341E1BB0A31BB3380768405C60155
-:1095F00070C32B5C6F35DC28525C93A1884E4062AF
-:10960000F21F8FA59DE23F1E3664DF0B57284E2BBD
-:1096100047215D3CBD2243FE016FC3C7F16C6A4622
-:109620003C1B1D3A268F607F18153A99E50826875E
-:10963000F81D926FD2778A301EFB0DBDD30FE52D3A
-:1096400066DB415C4FCCE7EE437F61B9F25D9F99E9
-:10965000F34764568CE6FB1DB6B9BDC86FCBDD5C25
-:10966000EF589D6334FD1BC58D7A6432E6E5F6A2A2
-:10967000CA0FC497D0EF628F40FAF5C6E5501ED2EC
-:10968000AEBEE822C9717D91D6CE347AB4F5BEAFB4
-:10969000D27F129B144AFF20DE2D6EB4D32FB9ADBA
-:1096A000C4C7A0DDFFAD08E09B7AF50CE76B8CE04A
-:1096B000F3BA8498C2B8A85BF463BC6407E201DE25
-:1096C000471568F119EDD6E22F769E161FF11EEDB3
-:1096D000FC13978FD3942779AFD39427D7BA3470DC
-:1096E0006A7DA1A6FED8C6320D9CEE5BA0A93FBE46
-:1096F0007DA9069EB06785A6FEC48ED59AF249FE66
-:109700000D9AF2C9471A34F094CE7FD1D49FD6B5C2
-:109710004D539E13B84F533EBDF7210D9CD7F7A86C
-:10972000A6FE8C330735E533FB9FD694CF3A774CB2
-:1097300003CF1EF899A67EC9E0290D5CCA5ED5D478
-:109740009F63FAB506AEB0FF5E53FF7AC77B9AF20D
-:10975000F9F29F35E537645DD6F26B04977F95CEBD
-:10976000BF69BE1353BC9FA23E60E20509F9B6650E
-:10977000A5C062319EDEBBCC847260308C0F3FCEC0
-:10978000B52B7E0D4B43795621160570DD5EEA122E
-:1097900068FD87EB3BE9CF1E37C6F3D84F0427C6D9
-:1097A000D9A2406D4921FD47BB4DE04806E1D8797B
-:1097B000760D1CEF7168EA272E9735E549DE2C4DB2
-:1097C0007972AD5303A7D61768EA8F6D746BE07496
-:1097D000DF3C4DFDF1ED1E0D3C61CF724DFD891D4D
-:1097E0005E4DF9247FADA67CF2917A0D3CA5B35174
-:1097F000537F5A974F539E1368D7944FEFDDA38141
-:10980000F3FA3A34F5679CF16BCA67F61FD194CF2F
-:109810003AD7A981670F7469EA970C063470297BDF
-:1098200045537F8EE9750D5C617F5353FF7AC73BCB
-:109830009AF2F9F2794DB96ADFDC907551FB5EB1AD
-:10984000772A9D9F69BEF795B919F287EF98E06C6A
-:1098500091417EE5F3F80BC8F57EB388F69187E277
-:1098600046319820087C1905420CF90A5D856A8A00
-:109870003FC551DC9754938CF93E60270010A34BF1
-:109880004F477B3A3268B7A55C997EED76DB1A6864
-:1098900013F97C6FBEB72A3F0FFD95A373D16EBF3E
-:1098A0008DF9B6E33840EF45F5C3FA78CDAC8D6756
-:1098B000A8CFF926C04B487FAF98F7A4B8AEE2F71F
-:1098C000CF375DA0FA43ED2A710E01E6D710D2FE24
-:1098D00003E0574860D7ED698275030EE3434D7688
-:1098E000821F6E7210FCDD26999E1D4D59F47CB4CA
-:1098F000C949E5FB9A0A08DEDFE426D8DF348F9EEB
-:10990000079B3CF4FE50D372820F831F8DCF23E060
-:1099100057E3F369F08FB1FC19F09711FE61938F53
-:109920009E9D4DEDF4FE58D31E828F377510FCE3DB
-:10993000263F3DBB9A8ED0F3674D9D547EA2A98BE6
-:10994000E0934D0182034DBD049F6AEA23F874D36E
-:1099500019825F6EEAA7676FD3397AFE7BD30095D1
-:10996000FFB26990E0568CD7023E1ECCE77E908A0B
-:10997000171566AC9CF841B50F17A19D8FCC51A06F
-:10998000FF8BC6CE0FB3B7C3E9F1A11217D69781EB
-:10999000B988F1C33199075B42FCACC795FE7644A8
-:1099A000309F19F8BD59C7FDDAE6184679D64CB193
-:1099B0005FD72B7CC9E2B8DDBA4E19D77A653DE492
-:1099C000217F66117FFEF2EBF815AADF9832C5FB06
-:1099D0002CF167AACE47FEB3C59F89F673C9146FF1
-:1099E000677E3CEE37AE7D99FAB33B69DFB1D218A2
-:1099F00088BF19E323AF8814CF1BADBFCD4AFEF853
-:109A0000A8E527CFA7A0BD3DEF4BD18B787A4D6F4E
-:109A10005D8EF1829E7C1E7FEEC9D7699E2F4DF12F
-:109A20009EC2F17C6AADBF4507E3FFB478CBE13B52
-:109A3000D283FEF4627449C10F5AC2643DE52732F5
-:109A4000F74BE9D0D48D6060217C33F3D1736EB6CF
-:109A5000F7556CA70A0C7184BD85C6B491E6153E16
-:109A6000AEDF2AF4FA6DBE4EF3BC3CC5FB1B3E2EA6
-:109A7000378DEBB599D767E2BCD471E54E9595BCAF
-:109A8000E481FD38BE4F5FB87856181FC4BFEAB7EF
-:109A90006F2F55F24AB6083C2EA7DA6B4A5E8AEA67
-:109AA0007754DF29F8D15E5F09FE0EEE2FBDA5D8F1
-:109AB0009F6F99B97EBE54AFCF42BBBE5A8870E249
-:109AC0003EDCA5FA3F5950DD427D86FB242D98737C
-:109AD00000E52D770B94CF5D0DEDE8A09D6A0C0499
-:109AE000E277F70AC47F13A7A6D3B8ABC1FC233F24
-:109AF0002B6E200DF74B815F2EE37C37CC147D0657
-:109B0000B0875FD3F93305DA975E6B10609CEBE3A7
-:109B1000804FC68DCE0F9B94F307EA7BE0B32FB046
-:109B2000BDBFFC744616C5F14FCE94116F2D3A7E21
-:109B30001EC9F7EFA293E7BB70512DCE9A42714A2E
-:109B400026399D1867AA54CEAF748BACF1E8087221
-:109B500074EC0CCE4FAF39F4F3FCD4AE76BF267163
-:109B600006A763E20C4EDFCA53AFA4E2F9AB4DBDCA
-:109B70007AB247586E7FB6C73AC27C1A77DD951124
-:109B8000C2DF9BBBDEE1F91AAC3F3B343FBD40E98D
-:109B90005FE527D160F51EB0848E6F88BFD3662045
-:109BA0001F45037F8F27FE3E8BF6F622A31C7533DD
-:109BB0003CFB014501787ABF67A77C2335EF680D30
-:109BC000F3D0733DB003F2B3C7F7A001F1BF8175C5
-:109BD000D2FB4D05B7A621BC990D943BD09F686F71
-:109BE0007EC901A35CB6E7C10A8CCF2EF5D7BC8431
-:109BF000CF258784B3E8BFC2FA983603E327427DB6
-:109C0000DB18E86FC533A56DC9F07E91C8E9C15E68
-:109C1000E5F400BE718B31C3E709EB61067EFF6995
-:109C2000B49BE621DAE669D643F536E616E282F918
-:109C3000F343EBA3E0F63F26A33F240DD0FEFBE663
-:109C400093C618A4F306C6F57730FEA1EA6D467CEC
-:109C50007E3B8B7062BD0F15BEFE3095115F7F2875
-:109C60008083E70ADA932CCDEB708D0FEADF0F7556
-:109C7000FE7CDB78D2CF8B10EF2F3B96C91837BB19
-:109C80003DCEE414B13CDA9FC6F75187E43CBB12E9
-:109C9000198C7B3DA0E771A8F07109052F7F86F62E
-:109CA00083D1C07CB8BF01EB9BE5E3BA1E63A0750E
-:109CB000D582A8C5F85999471EA9FD56A5DDDE2F06
-:109CC000B81FEC83F9E079C961FDD8957E22783F11
-:109CD000AA1EC1FE488E24304D7F9B31C905D78115
-:109CE000D54DE36FD64593DCF978AC7713D24B8D25
-:109CF000FFA8FE616FFA0719E4C77FDE9282763A09
-:109D0000F02FCF4B2CE6F2E935BDEC43F8B5D27419
-:109D10008AFFAB727771018F972D56E3634561F12E
-:109D2000B1B0B80C2B1A395EC698538FFD4E626FD6
-:109D3000A9F8A178CCA92289E8EE03BA63BCF9940A
-:109D4000E2A7964672FFFCF73362899F62E66710CE
-:109D5000BFD9625980F6A3AC22F15B0FCBB1C484AA
-:109D6000C889FB9438EB6EB08758487CFDBEDC0692
-:109D700013E61BECB0F0738CF79745D486E6BBFF77
-:109D80006EB69EF0797B71E92BC83FD9167F19A971
-:109D90006DB724E37C04657E93ED807F1D36ED5125
-:109DA000E2A54E138F4F9593DE56E97EAD7AFB699F
-:109DB000C9BF2D02E71FC7681D5A3BCC244FC54EB3
-:109DC000770053AF27152F3D4CF4943C59D84F776B
-:109DD0007E04B340FD4FBB0DE4E79FD4ADFE1EE60D
-:109DE000C50FBC6964B8FFD9694D96506F747E7118
-:109DF0005D393DADB3E6321EEF8CD481A0C8B1B35E
-:109E0000277E844453CE9F750AAC9751DCCD1DA9A3
-:109E1000035FAC53C72E97C0B88E595C7BA711EB7C
-:109E200079449CE77B45DE9F225EF2593DC1F71BDA
-:109E30003CB507A0DFFB634CC42FF714794EF071DB
-:109E4000B2B68530BEE23902C3F3BC6D066E9F59CF
-:109E50009D117C6F8A713BDF339849FDFF429197DA
-:109E6000AD0E771F1E1C19156F766960283E427C67
-:109E70009742713D158FA1F4B2E76BE8E5D587D223
-:109E8000AB00E83525945E6EE1EBD0CB8F4966F1EF
-:109E9000C3F9D457263F589ECBF51BA6CA85F36954
-:109EA000A971B605F35CBA6DA20EE9D61D919C8D21
-:109EB000F139954F55BE1D815FB7F4A0DC4891EC98
-:109EC000B86F6CAC8CA07D18957F55BEB514F2FCB4
-:109ED0002DE0DF5585F05C69F154A06C09E75F8CDB
-:109EE0009385F269F5A8FCCCECA1EB7811D815515B
-:109EF00031680F9D3BD419C2A7D5F517252E57AE53
-:109F00009444E407E37A8B8A04F66E28BDE1DFBB54
-:109F100059CAFCC81E92C80F53F17AADF8D77FA377
-:109F2000390BEDBBED786E11F0D52E38DD8918EFC9
-:109F3000AA7FE70E7CDFA69C1BF6651BB8DDA5ACEF
-:109F40001BB5BD49C5655105B82F30E342E43AA8B9
-:109F5000F769824E46E4B4C9AB7F44EBF04C24C3AE
-:109F6000EF6CB17DB54FD0BA9AC870DFF0D3DBBCCF
-:109F700063711F7F27D0E95D4AB2F627EA688FAB8D
-:109F80003F11D71520D7C19F5E077FCF94723FC185
-:109F900087668E53F2ACDD4AFD7EAABFD3B0C714EC
-:109FA00081FDA49BEC0743F8BF4489BB5716A8E783
-:109FB000755A64B4D72A0BB85DB3B7E9C8ECF72774
-:109FC000E0783A67BF0FE3895DE8675EE0EB882CD5
-:109FD0009F8CA921A62FE70878AE815DC73A311E74
-:109FE0008FEF9BA704DB7715F07567423B06E867A8
-:109FF000DAE69343E5A849277847CA83393C53E218
-:10A00000DF6D63546E3AF5089DF38FCD700A980F9B
-:10A010006DDAB687E13E8D39C0DFC765B885352179
-:10A02000EDC62D847187F005F0972F0AE48FE920A3
-:10A0300030662ED22182E292E1FD2E8A2FEB956CC2
-:10A04000A3F34938BF3185DF54BE51E74927564253
-:10A05000CEEB978FE376725BA3E100E5A116441384
-:10A060007E3F892B8B6223D89FEA733FF081CF8894
-:10A070007EB3899E07C1EFF64D44BFD941F061F030
-:10A08000BBF17904FC6E7C3E0D7E37963F037E3734
-:10A09000C23F04BF1BE14EF0BB113E067E37C2C774
-:10A0A000C1EF46F8C7E077E3B30BFC6E7CFE0CFC17
-:10A0B0006E2C3F017E37C22546E00F9C4F96CFB1F4
-:10A0C00014E8DA7EB7C18D7984FB15BAF6B8C7C536
-:10A0D0003A81FEE62C1DC5C4CDBF7C88E17CCC0E48
-:10A0E0001D9D0BDBEE7888DD8AFE6CBE95ECA9B673
-:10A0F00067B99D6296F632943BFB055F2D73C2FBF8
-:10A10000AE926ADCDFCB706C298B01785757C53E65
-:10A1100013AC8F4C79C9F2E61058B6BA361CB507A5
-:10A12000E1B1D90724F058D89E8279FBF048108E0F
-:10A1300003F3871FED5A50DD0C2C1418C7C8DE1826
-:10A14000483750DECE1AA417C6230A783CF106D64B
-:10A15000E2C0FDCCB132784502D50FB0B86BAFBFCD
-:10A16000BF40A6F7E1DF5DAD9E2EF79AEA31F12AF6
-:10A17000ED61B97095764CC232531F8C7D975E911C
-:10A1800053F1169253ED18DF01BCB79BF9F3BF678B
-:10A190002A7ECECCB25533E1B96A26A76BBBD9670C
-:10A1A0002FC3FEA7E8289F8135A6FF7A1CF477D736
-:10A1B000BF4B0CF34155FE7C5EE1830963AD742E09
-:10A1C0009FDD63A2FDFCEBC73EDB1A03F084279CF6
-:10A1D0004ECC7BD8C59C11C827BEDD3ACA7BFC415A
-:10A1E000EEF89825507D72DEF33128D763677279D7
-:10A1F000E357F2859ADBD68DC578D4A7AF7379780B
-:10A200005AE9E780BEAF9EE89967213B04284FF6E4
-:10A2100046B303880D3A5397C49F06BD7D05D633D8
-:10A2200080618079D9862F6698D0DF6B1934CEE3B0
-:10A2300079B37D648718CC5E7B34BCDFE3D3915C5B
-:10A2400068912D94E7B6CBE2EAC573CE3EBB8EF2A1
-:10A25000617765EB088FAD969BFC68E74B42732DE9
-:10A26000EA31BFFD98291DDEFBB37594DFE8772F37
-:10A270009D87B0CF2B51FE15FD60B93786CE77EFA5
-:10A280006203AF4EC3F26A6E87B525FCF55424C64F
-:10A29000BF6FB43BF9760B93313F8C52C574E877AE
-:10A2A000F76F8BC4715431C59FF591FF6A3372FA11
-:10A2B0007DA77BBE7D1CD91921FB5A468CD5394D13
-:10A2C0004E289F6A71CD43FF52B2BA4C98F7D76AB5
-:10A2D00077996A68FE3C5F8DF232A0DD16BB8EFC7A
-:10A2E0005C2CBF359BD4E1E98C7C25155FC6793F9A
-:10A2F000D48DF890D632962EE3F8245FE8BEA1699B
-:10A300007C51AF0CF3685F1743F3900427C16CAD29
-:10A3100044E31E2347D0B9E6BD86CA5EB417C7988A
-:10A320006EA7FDADA45A49B3FF94E8D5C2F1CBB5F1
-:10A33000702C9382FB57D0AF7DA61A7FD3E22D1CE1
-:10A340001F49F6D6D771FC495E3A04396CFC8FD8A8
-:10A350001F8E2E65384E0B8D33C1B2BA14EDA67820
-:10A36000E66946FEFB47C739D5BED4940EFD4F8D36
-:10A37000D39179348D0D6CC3767729FCDE9ECEE9BE
-:10A38000195C5722CD0BD6E53C5C97631B75E0B09A
-:10A3900005DB4FF781E3A6D93F88D1C013F68CD1F6
-:10A3A000D49FD8314E533EC97F9DA67CF2119706AB
-:10A3B0009ED259A8A93FADAB4C03E7041668EA4FFB
-:10A3C000EF5DAA81F3FA5668EACF38B35A533EB329
-:10A3D0007F83A67CD6B9060D3C7BE05F34F555FB48
-:10A3E0003E5C3F96CDFCFBEC7AA3638CE67E9B70D3
-:10A3F000BF21DCEE377DD9226F437EB619889F25B9
-:10A40000D4E7B8DF7C37F78F4CC54E19E54B81C2D6
-:10A410008F9F15BB1723DD4A6D26D20B9285D793EC
-:10A420002C73C95E49EB30D0BD3B929D0D9547A280
-:10A430007C6EF2CDCE98101CB7D9BE87EEAF28B592
-:10A44000CD63988FA47E2FD9DDCC6BC5FE64EACF97
-:10A4500064F7513DB30CDF87CCE3A44EC72C28C76B
-:10A46000C18F43FF6034BF4DF5D7543F6D34FF4C6F
-:10A47000F5CBD2742C029F0784FE3BD07FCFAE7FFA
-:10A48000BD2C9191FFB605E77D3F9EDB46BF6D2A4F
-:10A49000B7B3DA1216C818CF694FEFEC1D87E389FE
-:10A4A000D751BC14EC66E7D2107BF1B199DC0E9564
-:10A4B000C6B5F7A3FE6B8836C9682F49A603B3DF7C
-:10A4C000077CEDD7F73F85F18956C1BEB113E5E2B0
-:10A4D000DD16CA03D9ABE04DB6EAA66F83763B9B87
-:10A4E000DD129ECFEFDCC99CADB83EE24AB745C352
-:10A4F000FB0929353A0C034DCC68DE86CFFB67F2A9
-:10A500007D9F49D90774B1503E39B77439C6BD44EF
-:10A510003BF4779538B468EB60381F96219D45BEB3
-:10A5200042EBFE0A0CBD34C644FB9266A4B7404F12
-:10A53000C28379D0E237239CC1F162760BFE488159
-:10A54000DBAD9847571AD341F455ED59B473B1FDBB
-:10A550007B8ABC8F213EE3166AE92A990E113E766A
-:10A5600029FB12EDD1F22F513FB7A767C4E07E96C9
-:10A570003A4E55AE1C56EC7BF5BD2A571C986B9392
-:10A5800017B46F80CF3B30FE6696F6D0B94CF3BD62
-:10A590007B18F2B5194FB193BDEF933DA43F3C9AA0
-:10A5A0003CB4F271CB4DA8AF2FC7B9C89E3537FE6A
-:10A5B00098C6178E37733FCF471B0DAFB6CC4749B0
-:10A5C000BF830096F13CCFA9044B6D68DC537DBA84
-:10A5D0000BB8DDA257F386C093407D7659CD4B7200
-:10A5E00047F2F14573B82773058DEF8E7857E2D5A2
-:10A5F000EC6D33F89BDE10BAEF943C26C443DBE7E6
-:10A600004BE6D1BC255A0C6CD717D907289EACF85D
-:10A610004B6EC53EA9445F0C9E69067E8EC019B77D
-:10A6200090EE3353E3209766F2FC45A78F893C8E6A
-:10A630003794B7AEBB328DC62A1B54BD4BA62CD760
-:10A6400053F07F37E6AB8C6F97B479EE8A1E57F5DF
-:10A65000F4843DDAF2891D5A78927FD8F7FF897A1F
-:10A66000FE46FE3BE8016DF9A38ABEBE11F535EE4C
-:10A67000677D83E78B98604457B89E0DEA3D900351
-:10A68000A99D8152149B295B254D9EC998307D78E8
-:10A690004F914C78F0F44A7AD4B36A9C265C0E0B46
-:10A6A000F75CD882EBA534325246F989710CAF9130
-:10A6B000FBE55EF053EE979CBFAB46BFAA57A43CA8
-:10A6C0002A954EE174AD2D14147DEA110BC93FEEAD
-:10A6D0009F8EFE3AF6E70DE94F8DB79C2FF69A3123
-:10A6E000BEA1C65D2ECD935E12E4601C458D0BAC01
-:10A6F00052D6CF2EE71BF53D308E9E33468A8154CD
-:10A7000088BFEC6DC23CA95489E4977DC6C6EFA111
-:10A71000FF5DF67B28C778A22C27925DDEABA738B9
-:10A720004099C2C7658ABFA5C65BD20B399FA72ACD
-:10A730004FF82282FBF58108B45F271F01D9ABA532
-:10A7400067242FE771B6299DE1E56ECA5FBA4EE135
-:10A7500017CC3B2B4DC0742F0E773221D60E749C34
-:10A76000B6BCFF14BA0ED9AFBC14817C78D4CCED42
-:10A77000B5A7157E48608213F3F3138E589C7EA80C
-:10A780006715D9D13E9887F3B4A4C9339B7A420B9D
-:10A7900067B310381DC7A18577CBF5B8F5CC7657D0
-:10A7A000834D0E539E59A8E46567B24CE4AF0AD1BD
-:10A7B0009283FE5343A985215E8DEF4CFCB73E94F6
-:10A7C00017AFF37BABEC91F283E5F0BDFDD5586795
-:10A7D000B31CA4FFD3E047A37EF8EE15276BD50783
-:10A7E000E35ACF003D33687FD94EE59D4057848FB3
-:10A7F000815F9D41FBCB59F4FEC7E05723DC057E0A
-:10A80000353E7F067E35BE3F017E35C2B71797DEE7
-:10A8100084FCF216D443BE88C8396E1A8F716E8BD1
-:10A8200048E76EC2F97147FD7B969B4156153BC6C2
-:10A830002E8C477ED82AD2F9E49B0AC72EC4F3DBBC
-:10A84000A171B5D0386330AED62FA8713523D0E7CB
-:10A85000F20C59C95F50E26B5E1E5FFBEA76DC6A60
-:10A860003B14BF1CD6CE501CD3E47B3F0B8F6C092E
-:10A870002C0ADE7F74F77F1D463D9398E4ADC579C1
-:10A88000D7E5BD6BE076373F4F95A2ACA37D669EC2
-:10A890004F9AA2E40185C72F8BE7BC73473CA0EC1D
-:10A8A0009E9FCD5E89FE7FF1EDEF4C4F03F854E1A2
-:10A8B000532B31FFB7F8FBEF3C970C78CA9AB58160
-:10A8C000C37BDFB99CE2C43C8C875762FEAF2D96F8
-:10A8D000EBB77DCAB9A421BDA7AC97CD8D4F901E13
-:10A8E000073B83213E5A123CA45F3F8E1BB0D540EC
-:10A8F000FDCDF10309ABAFA20F36371EA6EFF70966
-:10A90000CE737E1CF74C13CF3B55F4CD2585775580
-:10A910007DD360E6A03A1ED0B0F47EAF120762EE9F
-:10A9200064FA2ED6CCE11E5B21E9A507CAE45FC913
-:10A930007CDF92FCE31EDB75DFC1BCBA967912EDB9
-:10A9400027EEB5B8CCA8B79E53E418B4EFA3FC9596
-:10A950000A13EDF3B0B8E5B4AE63D47EE2AA291FC2
-:10A96000214619CFE9C28800C6075ACA4D07518E41
-:10A970003E641947EDB514187C189751E16D853088
-:10A980001EC067B42D261D6155CEA9716386BB6AB2
-:10A99000D06E9932ED3235CFC1A4BF106A5F5B58DB
-:10A9A0001FF18F53278B681FBA67C9448FE9CCB951
-:10A9B0001CDF1B847A1F3223CE43173A0FB95C3B4E
-:10A9C0000FB942330FA1C11440BBB0A502E601F597
-:10A9D0004F5BF369BCE17453E7F3FD42CECFE1F383
-:10A9E00064CA7E927A7EA0CC5E741CC755A173B7F0
-:10A9F000E2B85EFAAC3A0E2F929CCBEA257C3F3E41
-:10AA000098CFD3FA75F2258ADF13F8FED7ED069AB0
-:10AA1000DF2BB3F9781E35F8D3E96087E44FC27DA8
-:10AA2000DFD1F8F84F0ABD837CEC66B8BE5A62DC11
-:10AA30009C8FED03B666E4E3E881846D34AFC08893
-:10AA4000F409E7E7707A0DE05D09E447FB44C4FFD1
-:10AA500057D157A56BF83E98CA2FEE597695DE0E62
-:10AA60009A67204DB34F082DC823ED8F6F87F6E40A
-:10AA700090FD3483C34376B63ECE9985F1E6962F9A
-:10AA8000C511CF4DCAB3F87A6FB64590FDDD62E3CC
-:10AA9000F677B76D81C66F2A073F0AF791C558D67A
-:10AAA00089EB4A8C5A41713431112D2F620BAD5D07
-:10AAB0001BB590DBB576D755CF4F49FDA2E65EB505
-:10AAC00061766DCC026ED7DA0C64D7EEB31A961F9E
-:10AAD0001841EE0C16723BBD1BE73182DF08FE22E7
-:10AAE000C533557FD160F792DFA7CE7350E177B5BC
-:10AAF000BED15ECF30BE261A9C32DAB1A272BE152C
-:10AB0000F39AB342EC02B5FFCBCAFECEDBC5FC3CE8
-:10AB1000849ADF5EFC2BA17E24BCE7CC52ED92919F
-:10AB2000F9EE1FE01B92132E8BC18D7687CBE2A02E
-:10AB30003CF0D1BEC32DEC73314139E3FC325F24CC
-:10AB40007D243929AFBF53DFFFDCAFD01F7CC94262
-:10AB50007AA7D39A52166A9783D14AF9C9E0FFFAC5
-:10AB6000B2A0B1A37F8315A90BFABDE087DD302B1E
-:10AB7000645FF254C359DA070AB757C3E30A43EBD9
-:10AB8000DD76389D8FC79F84EB5768284844BE0AFE
-:10AB90005FEFEA33D531FDBA3530AED4A41C7AAAC2
-:10ABA000EF1F67E2BC91EE4F5B3D4407AEA7274124
-:10ABB000675122E9E7D538EE8FB6BE91E094F19C5B
-:10ABC000ED45D2D397EA0BA27620BF67C5907C4DA6
-:10ABD00051CE8FA9E349B9AD3B3AC682797C039344
-:10ABE00030FFCDDFE4B9AE5C4F7E867BA4F13E3012
-:10ABF0004B89C305C6B2D0FB81E4B8BEF91301EF9F
-:10AC0000B245E794697DD949FFA972A0548A2EB74D
-:10AC1000039FA73631A745C6AB93ED14174BBD2252
-:10AC200012BFA5F6F0FB9DC7C60D0878FFD0503FB8
-:10AC30004A9E93BABFF2497D39ADCFD444C6FA28B3
-:10AC40007EE9A17D884FE2024B707D7FF2301F517B
-:10AC5000EA13DA72D0B914B75EB735C22F43D363A3
-:10AC6000EF85F1E178BE27B094741C474FFA0E8C43
-:10AC7000FBFC2492E23E624706C56D6E4BF2DE4558
-:10AC800078F5CB77E9C62B93857A75DF8AA0FB042C
-:10AC9000F6097DF3299FE24E1D7B7284B8D4BFCEA6
-:10ACA000E2EBFCBBB3F83A4B75E4737A3B72AF5BF3
-:10ACB000137BEDEBE914CA6D18C7AE283FEDD3A99D
-:10ACC0007961BBF523F3152BE27EEA903C56F067E1
-:10ACD000422F08F8451414BBEFC8D34F3F9DC0F86E
-:10ACE00011C3717C3F3274DF3822C34F85114E3758
-:10ACF000C91FC1EEE672D65EEFF0017FEFF8421C8D
-:10AD0000B1FFD715FA35A7DEE5C0FAE5B2939EDDAF
-:10AD1000A9F9676A007F168B811943E4B0CA27E15D
-:10AD20007ABEC13AEEAA7EBC01E4B17C953883417B
-:10AD3000C9FFDA7E6AA609EF0FDD6E71F5A1FDB5D8
-:10AD4000DD12E7A238BC05E446485CCA627999F88E
-:10AD5000D0E2E4F13A0BCA5F8C4BE1FCB371FC2FFB
-:10AD6000D3FCD57ACF2A72C8E20CD07EA9D9B98794
-:10AD7000EA99240F9D9F33C531CA6730D9F9BDA325
-:10AD800011193A661A411E1F9EC5FDC0EDD9AEBE0F
-:10AD9000321A9F84C7AAD87687CB41FA10F10CDF0C
-:10ADA000F758F3A342F1F39E220F5ABAF9FC3C8DF7
-:10ADB00049F6723C6753ECF9AF5979D8CE6A13DE85
-:10ADC00073275A73AFDACE8561ED3C92501E4BED7E
-:10ADD000BC87ED8856971DDBD12BF7A786E3F933A7
-:10ADE00085DE7F6F3C0D3048793C8417224C404310
-:10ADF00097F0A705E362B1237DC7E562BAE2BF80A1
-:10AE00005CD417C1BCEAB2DF7D99AF31EEB7C4CCD8
-:10AE1000E779429780B3F1DEAAF0FC8B703B46D510
-:10AE20003FAA3E8276446CE751B4632606D7911A56
-:10AE3000CF49AEF5F0F512E7217E01BB46C6F522FB
-:10AE40002A797EE1F3B9A188E35FB015C8A82FCABB
-:10AE50003FEF4FC6EF4E5ACF25733B56BBCF7CFA20
-:10AE6000B3C3662CFFA4B6ECAAF68ABAAF3CDA7E6E
-:10AE7000B2ED5F3EDC126AAF8CB6BFFC55FBCAA7D1
-:10AE80006C068ADFED17B4E7E32B8AB8FC7317A9C9
-:10AE90007119EF8C228C430A1E273FF0CCE3339FBD
-:10AEA000157B0B914E69ED06E603BA9EFC2CDFE1A3
-:10AEB0000D69E75AF1ACC6E1C728F6D418CB610199
-:10AEC000D7E9985ABF8071F4E4DA4EC17D957AB122
-:10AED000455C8FABF5F54AFB25D28088FAAAC4CE33
-:10AEE000F562F2A0C4B242E48EAD88AF5FBD62BF2E
-:10AEF000DB4E3D65C6F64EE93CED99A81F6C3AF96C
-:10AF0000C990F5AEBFCD652A0B995F0BEE0F8D4052
-:10AF1000C74D45AA1E0C90FE56F5AD5ED513719235
-:10AF2000464F6C8EE47CACDA3B9B0BB93FB4399254
-:10AF3000FBE5AF3ABCEB11FF1F177EB868BC8CE78E
-:10AF4000643B0DB89FFE55FB2443F68DCE5FA3FAFC
-:10AF500033C8FF4EC9FEF37EF83EE7FBA564EFE57C
-:10AF6000E18D23226ECD72FB0FECA93B8BE2F9D56C
-:10AF7000FCA1F46661F70B8E361F2FDE6B9A87F10A
-:10AF8000BF3E8ACFDEFFB930E27988AE22D52E1AD5
-:10AF9000DA0FD4C4599315FD96AC94CB18674DC7FE
-:10AFA000FD2D6D1C747AAF16CEEBD3C233CE84C5A3
-:10AFB000557DEEDFE0793FCC1FC046F7C13A4339FB
-:10AFC000B146D9F74CF1F94BF19C782AEBA4FDC5B9
-:10AFD000E4DA180D5E8B4525EF02AF3956C7093FFD
-:10AFE000C952E579FCFED921FAFB9826BFBF7CCD7A
-:10AFF0005D782526DBC3CFF999A073C4D7FAF94B46
-:10B000002B90AEC3E2B5F5DA386D726839E061DDD8
-:10B010003EED79418F3B87FC8165DFD09E1B54F369
-:10B02000D271BEC9AEE1FD7F75BFF02F6678FF6AB1
-:10B03000BB8F82FC21F9AADC279C8A45D88E14108C
-:10B04000709F7B4C3DA37B8593B732F748FB057F10
-:10B0500054F0158E67E62B21FCCD51DE8DB1F07CCE
-:10B06000D5315B75640F8E01B9407F6F6023C800D6
-:10B07000809337CA644F2EAED531D40FECF326CD72
-:10B08000F7305C8AA7AA747FD4C2F37153EB985F40
-:10B0900087F3A9BF8ED6138D6B5C901F005F9A7BE0
-:10B0A00005161768CFEBA6869DD355F92039ECBD60
-:10B0B000AFC8AE5917A0E7FE58447CC2F5DF04D4F0
-:10B0C0007F30A48F669E398CF975C5DB18BFD726F3
-:10B0D0003A82DF6B13DC8F10AF00BF9E32CDC942C6
-:10B0E0007B65973D4287790F27A3FB1F63D18C5D5A
-:10B0F0002C62BEF222BCEF7060B200F017275AF744
-:10B10000B7CF8672F3C00F30986CD9BDEB9679A992
-:10B1100041D8F6C0F70866054CC67B8130E714D7E6
-:10B120005D847DC111BCEF3A22DB42C1C908A6BDD6
-:10B130007FA7B550DE8D7923AD1374CA39E99072BB
-:10B1400098C786D9EAB97F37E5DFB1793C0F20B4DB
-:10B150007DCCCF1EB5FD05D07EEED768DFC4C79F7E
-:10B1600080AF40CF24E0F8310E8EED237D3168149E
-:10B17000DABFD29EC47C0770FF06FAB308BC3F3B1F
-:10B18000E6A524306D1EC2507F76E86FCAFFC17CF1
-:10B19000960FA787FE6AF458F1F5E8D1AA73D37821
-:10B1A0007D532DE407E13D56785F9D59E9CFACDC36
-:10B1B000DB85786DCD0FE215EC406A17AA375F5139
-:10B1C000F08C7986097603E17934BC9DB2F3BCA892
-:10B1D0009DF6087F73FAFF077A3938BD42FB437B3F
-:10B1E000F29AFB5B01FDC55D7B7F885F5C3F43F8A6
-:10B1F000059A6C4BB876FCC2A87CD782DF53D0AEE0
-:10B200002E04AFC1FCA347ECE81798F51E13E663C4
-:10B210007E6B7634C9EBECB8A526CA47885F4AF93D
-:10B22000C56DD916CA876FCBF886491FA2A7DBB2B6
-:10B23000ABA91CEA53DE54762002C3146C0AEBA3BC
-:10B2400038C0CEA27207FA85BE7A9E87A5E625A9E8
-:10B25000FA9029FB9F342FF8306AF6F18153507F22
-:10B26000677D2EE59D4545FF95F2AD76D53A9D5813
-:10B27000FE9899EF637E57D9C74246A578DAD4C2C3
-:10B2800027703FD735A141A0FDCB8D57DFBF745D3F
-:10B29000EC2BC3BC2D56C3F3B21CD552983ED4AE92
-:10B2A000DB5D88579E3FE517387E35ED3D3B3B9E85
-:10B2B000F0B633E320C3BF3BF41CB4256AD7970E26
-:10B2C000F398C2D7A36470D33D63AC4147E348C64B
-:10B2D000D4005071AE290B1D35F03E65AD44F7F931
-:10B2E0002666DF4BF94C60E593BD919DFDCB328422
-:10B2F00087CD738D761EE1F30A1FB77ACFB14A2F3F
-:10B30000D7456724FA57AE094B29DF8C7ED4F52E3A
-:10B3100086CD07EC61739C8EEE838BC8089917D39A
-:10B32000D453FCB77F2EFC18E82A5A47E1FB62FF92
-:10B330008F9F1B3232A7C940DFA9E76CF87EDB186C
-:10B340005C3B48F734C6F3BEC3BFCFE7DF3307DF4C
-:10B350007F334630139EB3113644501CD368041813
-:10B36000CFE128F78D3DAAC4DB9A052625B942FB1B
-:10B370000B50DEBC68BA2103FD8653A665763ADF22
-:10B38000A6F851FA680FE52DB2AC188D3F7A4A390C
-:10B39000A7D6705B7A22C6EFA2A0AC0FFD6AC9697E
-:10B3A000427AAB7113DBF8FE6FA21E3F3B5BBFCA54
-:10B3B000847A1B9DE042C62EBF70653FDE33ACAE83
-:10B3C0004FE320BFAF630896EA292FC43898A679C7
-:10B3D0001F50FC301576C749E5141F2A9609CFA5E2
-:10B3E000CCDE8ADF95027234F70328F77F0C6F3FBB
-:10B3F00045F33E00FE75E8BEC0E8ED476AEE193041
-:10B4000082BF3372FB9961EDDB476C3FD86EACA60F
-:10B41000DD3689CB0D5F5C847FA4F81EE6FF17C77D
-:10B420008F9EB79655ACE4DB9B40A2E13E94C23FB1
-:10B430003B1CF594C72646F07D533D8811E4A71EBA
-:10B440006B2DCFBF48D1E6B1A9F78BB4E1BD215038
-:10B450005E66D1DAEBA56CA0679A807EAAD65E2FD5
-:10B4600046498AFB532CDC8EAFA77D527D8A562E2F
-:10B47000F4E07A81F9E8ACB97D94F7166FA1BC8647
-:10B48000D1E20B6F3531CAC7D2477AEA51E7959EB0
-:10B490004C1ADB56007014E7B3C527A7AEC2B8D16B
-:10B4A0005B0A3FB7811CA073A40D8907C49076ABDB
-:10B4B0000D8109A857AA75FC1C00FD40FF6FC58FC0
-:10B4C000A1386B78BFEAFD312ABCB25E989D11327B
-:10B4D000BFB794F531D4DF1DC907D0AE1DEACF1830
-:10B4E000C8A3FE86F28A94FE12FEBEFEFEA0AC6FDA
-:10B4F000B5BF957769E7B7D2D047F35BA9DC5BAA04
-:10B50000F6F7079C5FFADFD19F920F36D4DFB7B40E
-:10B51000F35B69ECA3F9AD1CF22F95FE12FEBEFEA3
-:10B52000D47C07A3B1BE16F969B4BC0735DFA1D03E
-:10B5300091AAC97700CF6661A9C4D88302E78BEFCF
-:10B5400014CFFA1EF2C5E5850D4EB253147F8FCE8F
-:10B550000789743E88F4E8E2146E87A8ED1F692A13
-:10B5600060EE893C1E84CFAC2281CE1F4C2A10DCB9
-:10B57000B8CFB60FE407DE83B71FD63996FB9B1C06
-:10B58000F43CD824D3F310F8976E8A7F39090E144F
-:10B59000737FF1C1247BD51AB43F4A2378FE75D15D
-:10B5A0002CB06C83FE1BAC975366CC73BC89E5E072
-:10B5B00039B4CC0E8ECFB8F204BAF73E22E7745FEE
-:10B5C00013C03B0A4419F3CA77C823C7737E5ECC05
-:10B5D000E3443B94BC491F9E9724A502FE24CC7FE4
-:10B5E00095422A262EA4F3368BBF154DF64DF5371E
-:10B5F000FAAD7618C72D42CE6F32001F7F54EC9BF8
-:10B6000055690B481E84FBA771A8A972319F50F49D
-:10B61000FBE1D765D665E4DF2EBB91B118F87E312A
-:10B620007E077AEA578A7DF45ABF91A1FFE72BE79C
-:10B63000FBD7B7DCABF54B1F3407EC68173E98130C
-:10B64000C7901ED55BB5E53B0C7CBD2D0BF35317A6
-:10B6500087E5FDA8F720EEC05F6732D655ACDCFF6A
-:10B66000A2E4FDDC85721EE338293194E4AD9ED35B
-:10B67000341AD988FB926A7BBF53E4168B73131E6E
-:10B68000D43C39263E9383DFABFDA9DF3D2A3C93B2
-:10B6900074B5B829D88167FBB3B8BE477BFD3F8A34
-:10B6A000B5F94997178EFB4E391B896F07248C53C8
-:10B6B000A8E3FFDFE2D71DC57CBEBF9AF3492E3F4A
-:10B6C0006797C242CFD7A9F95FCB866089EE15563E
-:10B6D000F3FF9863201BE9FD9FB3239DF711FF291A
-:10B6E000F648E04DDD95C8AFDFDED0381CEE54CD16
-:10B6F000F955A5BDD1F03CDABD13F413921FD9D290
-:10B70000EC74D079BA78BECF3626AEEC3C9EDFC260
-:10B71000F27735FCA53DA7D5D2FD94807ECB63782A
-:10B72000BE4D1FEC17E3C06D166CD7CFE34A81A75F
-:10B7300028FE9B521B105AB383E781C2E562CA46BA
-:10B74000ED79B3F0FB142B2DFD922063BC7F80CEEE
-:10B7500031CE2FE1F4A23B3BB05E3CB727C5641D60
-:10B76000CF17192B73FB3263202D74BF636A899244
-:10B77000671AF9C65619446F46C943AB306FAA32EF
-:10B78000EA8DADE9288A4BF6AEC23CA9CAE4373E41
-:10B790004907793BA9E4610E4F7EE39371004F2E78
-:10B7A000F9570ECF6284A42925DF5D85FBAA534B90
-:10B7B00094FB95581F9DDB4E4CE27CF4F73E45A36D
-:10B7C0006EC47539A3448D5B323AA7ED39F18B33E2
-:10B7D00028A73C6A9CD7ADDDDF64CAFD8937A8EC99
-:10B7E0001567237B6901FE0EF8BC41B97747670AEC
-:10B7F000105E2706EF3579F8EBDCBB133C27CFEF63
-:10B80000116A69645EEDFD886E85FF79DE903A1EEF
-:10B81000B5FF61E3C2FB016342C7B58FDA51C7F5DB
-:10B82000718ED1274C0BEED7AAE3FA5818D88F4166
-:10B830008F033D7D3548D78FAD0369F8774E60990A
-:10B8400079098E1FD82F3843603DA7E3CA921F9114
-:10B850003D559CE45E5982F97B067E7F41BB624781
-:10B86000EE8AF7FAD0AF077EA3BC4D5F2A3FC750E0
-:10B870009EABFD7B6CEB4BB85DFA27E55961DC5361
-:10B88000FF7A2EDEA72EB066A8BFF9F3CB06F4FB35
-:10B890002B4FF0BFD7BAE9F83B06F4DF37210CEDA8
-:10B8A0006CDA6718F1EFC17D888709F8FAD5F82BB3
-:10B8B0002FA566B6C5C17836ADE1F76437FC34BA5A
-:10B8C00002E1861A9A255B5174B4023F5BE9E96E86
-:10B8D000C3E72AD6FF12EE4B5479B57EC4376BB559
-:10B8E00076FFCA7AADBDBE6A0F5007F4DAAAC6E485
-:10B8F000B0FBFCF83D81550A3DAB1CBBFBF0FE8163
-:10B900002A16764FA08FC791BEC967004F6D7CA4E1
-:10B9100012FFAE14CE63A34871DE9752B74B78FE88
-:10B920006D733DBF9FACA2EBA281CAA11EEE2B2579
-:10B930008CE1F7E1A9F253D5EFDF7CE1801EE3054E
-:10B94000E1F705AE5A3E8FEE055F2E6FE0FA7DEC13
-:10B950006F2B62E07DF83D80D55D5CBF57370A7E76
-:10B96000BC77F79BB55A7F6025EB6B437F6665BD5F
-:10B97000F6FDAA462D7CA444D1BF93D9645C1FCFA9
-:10B98000960812AD1705BE90FADBD702C83F499E54
-:10B990004EE4B78D86C054D473E5495E82D5727883
-:10B9A000BF89EB21AEFF75B09248FEEA79DCC25741
-:10B9B000C7EF67FBE6307B20C45E1087C3EFA9F2B8
-:10B9C000D3ECD94A7ED80B02FD7DF072C92DC58417
-:10B9D000F8C9E17CF8BE223F5F63FDD938AE4C6404
-:10B9E0003AA04BE632FEF79F335FACA1BCCACCE96C
-:10B9F000825347EB58C71AF15E3190172817D0FED3
-:10BA0000C4FB3232C5CEE524A7A719ECFCDE1D0726
-:10BA10000B5DFFEEA79880F9823874DAC74DE9A56F
-:10BA20007B371675ECBE88722E63BCDBF5208C6FFD
-:10BA30009772AFF6AE9F0A64CF6ECA7E99E4612218
-:10BA4000B005F6BBC9A1C8C52EED7D188928A7F0A1
-:10BA500000CBC26CEA3749DD7F50F37A036574BFCF
-:10BA600054A2D2EF971532FF7B7B1B3A059C772AB5
-:10BA7000F335631CEAD7280BE3834F759FE0C6E0DC
-:10BA80003EF97AA4679DA39FEE8751F7C947A8B7EF
-:10BA9000A5247E78BDD1E4EFFFF5F37F007E0B583F
-:10BAA000CA008000000000001F8B0800000000009A
-:10BAB000000BED5A7B7054559AFF4EF7ED4E7712FE
-:10BAC0004227813C0C819BD72C90109B8420E8EE70
-:10BAD00078BB3BC984D7D8E1310642A49909BB5150
-:10BAE00092741474A3656D1A616207DD2AA1D045B2
-:10BAF000CB3F1A4A5CA756778366B1D186ED80A109
-:10BB000050519B151D184B2AB0AC23C50089382E07
-:10BB1000CEB0C37EDF39F7D27D3B378A535356ED23
-:10BB2000EC26953A39F73CEE39DFFBFB7D171430F4
-:10BB3000C15C80071C002003D499AF650C5760FFDF
-:10BB400040492E607B9D7EEE1CDB9A6D26906DC079
-:10BB50007FAEE39FC5910AF2F4787FD1F46C5D7FEC
-:10BB600089B34037FFAE7925BAF146A55C37BEAC44
-:10BB7000A15AD75FE1BD4337FFEE268FAE9F92B744
-:10BB80005037DF2E2FD5F5D3A6AFD2CD9FE0FCA93D
-:10BB90006E1C26F5E7792700586D81611FD221C8F8
-:10BBA00000E665E1BED6F4209B08509E8193B14D1E
-:10BBB000ADB6A7531B9C9D126519D8DE925149FD65
-:10BBC00094B71FCC8BE236B6892FDB5CD8FE130B03
-:10BBD000B9B3710F2493AF1FE938F351504209F400
-:10BBE000FC3B8F09A026DECE517C77BAB0AD7849F8
-:10BBF0002E408EE04F6CA67716AE4FC57FE7E0DF94
-:10BC00003E5B684F11C0ADB827CC8FEF03F5AEF99E
-:10BC10000AAD7B54590093B01F064719CEDB6D0562
-:10BC200085FA817D56BEAE223C6C52D2E3EB86147F
-:10BC3000C6DFFBB4D7BD80F6EF8C3007E0BCCE9DED
-:10BC400067AD7205F50733146C2BBD67AD909EF898
-:10BC5000FC8C959E774A23A90E6CFFA5DFDC103281
-:10BC6000909307152BDFFF4821B6788E9607CDA15C
-:10BC7000143A3B288B5D286F4D20E4AD65EF48D426
-:10BC80008CEF6FE960CE003E6A92EF5B0C4857F094
-:10BC900059CE0E23C96DF87BBD18CF999FB11B6E8D
-:10BCA000E5EB017200D608D6C1AA79510BD1ABB928
-:10BCB0004DCCD7F8B96679FD795689FB76253D9F3D
-:10BCC000D23B6ACEA0F5D2D9614D1EF0DE3F53269D
-:10BCD0004CFA2C0D3BE55071BD04E0A4D76478AF5D
-:10BCE000CD1E0960328EFB3C9CDE4F23DDCC8CE800
-:10BCF000984C2741BF6FA3CF2BC4EB043E25CF0B3D
-:10BD00007A049F5E61D0D49F3E76FC5DE2239E67FD
-:10BD1000378B558119C0EF4DE572DA6C5BBBFE5C69
-:10BD200035D1FFAB5E46F4FF570629B8FF27836F76
-:10BD3000E7C824E77B877286713F7FFF500EA09C87
-:10BD4000B55BE44DD2242E07CE4DC897CE70949F9C
-:10BD5000BFA3BF7A909E778499D38E47F50F8CD678
-:10BD6000F37BC270AF239DDE6B7CAE6D8A899FEB47
-:10BD70007945E6E7F7FBF09D93687D4A28C488EF94
-:10BD8000C3562E17FB193C85FDDD7DB6A690C13E3E
-:10BD90007F4FF4C6F56FF55941423969C7F5748F85
-:10BDA000238547AC36929BBD782F46F738BE228D4F
-:10BDB000F6DF680199C5CF77B130769AEE7FAAD5C4
-:10BDC00002017CBEB9D5CCE97D6AA399EF635EF729
-:10BDD0009FBD05D85F89F29782473DDC7AE548012F
-:10BDE000EE7BAA0DFB785FCF3A0BD7BF95F7333EBA
-:10BDF0003F597E35797D4E95CF953EBDBC25CBEB29
-:10BE000018396DFB6E721A8ECB69E57533E77B5D71
-:10BE10002EC9CFC3E0DC43FA73EDB02517CF5BDC4E
-:10BE2000EB703E86FD59E6D0CF73C82E1C16E3B3E7
-:10BE3000DB7731615FE45574AF82A015B63292238F
-:10BE4000C1AF77895F93E96A232C8DF4558A1593E6
-:10BE50001DC2572BC4E7572DD0B4B7829E0BFB32BF
-:10BE6000EBF5BC5D5B13E4F611551E35BB576E0553
-:10BE7000DFDE749ADF7F4B23EEF30AAEA7E753D5DC
-:10BE8000FDCA4A46EA1BB1BDA0083BF8917A0EAD47
-:10BE9000FF0F1EB11FB4A396211D97D804DD17769E
-:10BEA0004757D33DE64EF17D42F66FF1D48FDB016B
-:10BEB000ED44B0F89D0A1F9D0F9C269AEF57E97E2E
-:10BEC00078FEAF9FDF80F7B5CF48E57C6D3CF46C22
-:10BED0008CF8DC592A01F1DD5E3627D767207F5ABE
-:10BEE000EBBF5A04BEEC78BF33325AAF18E8F57690
-:10BEF000F5BCB3ACE2FE104122E5737B2CCDAB8ADE
-:10BF0000CFD3EE0FF018BFA7BDEC05CEA70DF7C33A
-:10BF10006C333FF136BE4F73FB71B616F7B9DBA237
-:10BF200058D291CE1F4F6C5A7FAE0CE09D1E3491BB
-:10BF30007891633D36F0FD05C0FB3D0EDE8FF5E4E4
-:10BF4000F1FEBFF7C8BC9D31D5FB0705F759F15687
-:10BF50005719D1EB70E1335E37BEE7F2310BA7031F
-:10BF6000809BD369832A7B572266B0E1F89501163E
-:10BF700002163FFF3D570BC087F6E457F43E5CD8EE
-:10BF8000D1FD21B773CEB6D17A399DE4EA4C2FF5B5
-:10BF9000FDDDBFADA7B8E134FA09922F7F98411EAD
-:10BFA000EEB3FA6A365FDF113E6E95490E4C23F50B
-:10BFB00044FFC041062497FEAE516E3F9FC77B29C8
-:10BFC00078EE1FBA32F9FDFD91D926C1CF39224E44
-:10BFD00051F93F38F3771964BF6CDDF20777101F12
-:10BFE0008F9A391FB7BA47321C067C3989FB428ABF
-:10BFF000383FB5C9E34DD6409913D735A9729B3C5C
-:10C000007EBB4BC82552D8427102FD30A4DB6A5575
-:10C01000BE5AF02A13315E581D66D154D4DB96887F
-:10C02000E7BC446D1783B33A7B007056D367F3F8CF
-:10C03000F276B36D27ED5716EFAFF4E1A609714E16
-:10C04000735B1A39D184F707F83D520A4B737DDFD1
-:10C0500010DFF987315E437E75622024A3DC775CB4
-:10C060002DE7EDA5FD8FCBA427B6D49167C82FC0CF
-:10C070000F4C8E3DC8DF8E803EBE2953F5A0CC23E9
-:10C08000E8B6D4C5A4CFA673BB554EF7AECDF7AD79
-:10C0900070E1F3DF147E9C7188D4DB1AAD04E3E712
-:10C0A0009D80FED846FA84EF2D47FEBC6A70EE995B
-:10C0B0001EF72A8A9FA6C2535CBE01E59BE42AF9BB
-:10C0C0009EEB5CE25C9A3EAF3C74DE4AF1AE3F6CA4
-:10C0D000ACCF351ED73A3A4F1F4083919F2B57FD67
-:10C0E00073C74EC6E9E5DF99CDE97411767ADD288C
-:10C0F0009717F11CBB512E2F7BBD6999B8FEB2CFAB
-:10C100009B96951ED7FFCE9D697C5D5FE9D2ECB50D
-:10C11000D87F4495FB4B618F8DE87CCF4EA177DAB9
-:10C12000FB4E47576693FED45846AC4E1C9F1239BF
-:10C130009341715DCDFE65D9A47FE39DF33EB7B811
-:10C140007747F786F5E7B2853C98519FD6AB7ECC12
-:10C15000FF58D44AF45FDF0D5C7E07F77DD249FAC1
-:10C160007B2992E620BF77F1405A80ECFDE58329D8
-:10C1700021136ED54EF28EF6ECA265F8C73C7EDC3C
-:10C180006F7604709EFFE08567481FFDFB501B71B2
-:10C19000DFF591C747C9BFB547169C97A87DF9FB46
-:10C1A000D5878EEE87F87DB5FE851E9B4CF6F39203
-:10C1B00024ECC4FAF06B3C9E5D7FED4AA5B782EE9D
-:10C1C000F9FBB964CFFCFF76652ED931FF9B57E6AA
-:10C1D000D2B8FFF5B42EA3F8E4798F99D355F38F35
-:10C1E00045272425715E9DAA07455B9E6A2846FA6D
-:10C1F000D51C5FEE34CB09F25566F2D2FC9A8F6AF9
-:10C20000B3D725ACDB12931AE8F99CE3B569AD0905
-:10C210007279BBC7A2DA21D46AB43F2B551AAECCCF
-:10C220007B3266AEA4BE1450E308769DC7DB204B7C
-:10C23000C8E766FA0F55B12F26F17826D0660E951D
-:10C24000E17873CCA4D82B691CD725C41900DE452E
-:10C25000B388DFF74E766E95B9BF871EEA3F5C164E
-:10C26000227F0F01DB5069421CB432668AA6A0DC33
-:10C27000344552A2140FAD8C4967785F8D8F4E3BC9
-:10C280005EFD7931F0F8E85C629C83F1D0397DBCC9
-:10C290000413E8BC5ABCF431C55518CFB66C8C5A9F
-:10C2A000C85F619CA49BBFA6E947E7290F5BD3AD9C
-:10C2B0007F5E14934C4BF09E4568EE880C7DB11D5B
-:10C2C00036D20F2DCE247E0D18E8FB4FDD429F3570
-:10C2D0003DDA1233713E6C89B96DA5D836ABE303F4
-:10C2E0000E130470FF2D91657B186EB6E5DADD69DB
-:10C2F00044AF2D2796C263A4EF0EB7AD8CD65DFB7D
-:10C30000916D45455C3EC6D80FB7B08FF178C0D867
-:10C31000CF4D51DFFB7DF9BB3CF79F87BFC3BC7A94
-:10C320009A7B32CFAB9B293ED4F2EA643FA1D95F1E
-:10C330006DDFBB547A8FB5BFE779FC82F92FB7BFA9
-:10C3400077B9653E6F4AA4319BE7C5279667CBE96D
-:10C3500063F72F919CA6AC8AB1FB6BF19A3FA00CBE
-:10C36000D9288F51CC5C3FFDCB598851DFCB789CCD
-:10C37000ED5F6D09D1B8769ED872C6E7AD70B29008
-:10C380009DC5E33F2D3EBC313E07C78BE2F1A216AF
-:10C3900017C6BC8CE741CB150B1F9F31D557EFAEAD
-:10C3A000A1FBD9F9F39AF9625FB40343941FDDFD51
-:10C3B0001306DC0EA8F1A2269FC9F1E41791928919
-:10C3C000DF841B3DAFCAA5A65F5393F442F3538F9E
-:10C3D000B8047D3AC94F57939FFEDA4A7A305EDC43
-:10C3E0008D7E7A959BAF03BE7ECE4792D728EFBE57
-:10C3F000A8FAFFFB886FD84E89BDE5A2F316426C00
-:10C4000013E58BE3F9CF856A1C33DEF8232E91AF59
-:10C410007C9B1E3FADDEEFFBD2E36D6E71AEFFED98
-:10C420007A7C23FEB31ADF73A6C7F51CC96FAAB9BD
-:10C430002BE622BD7B17F54E1E3BEF2E2D9F944021
-:10C44000C79FA142AB89F21E7F9BC0018299F20770
-:10C450003C3F79DB0CB4CFFAABF93C4EBBEF6A261C
-:10C460006F83F920FCE883451CB7B9EFA5E31605F7
-:10C47000D7376F64B3090F6A6ED3DF273859E138B5
-:10C480005BE000E3F17230BFFF08E955604F894C73
-:10C49000FBB7D065090F69CB0C6D26FC82709C5BE5
-:10C4A000E9796A9C0EF89E0EF5F91D2ABE034971C2
-:10C4B000C09B83A738DEE31F6040FA6B8DA0FD2090
-:10C4C0007B7254E01D9D1161173EEFB6737BF2B98C
-:10C4D00024EEE1EF66A14D2C1E479C8F6CCB213DD5
-:10C4E0001B134F28184FE4C4E3898E173EE2F63041
-:10C4F000397EC81A10EFF1B79B4384C70C15CE657F
-:10C50000D4EFC07C3097E24459BEAB409C0B42DC78
-:10C51000AE283A9C64F72DC2EF7F71F43F781ED9A4
-:10C52000BC9F41368F3B9458694E3CEE58135CC813
-:10C53000FDBF1667AC997664A880F653E30C07FE3E
-:10C54000127E981C6774868F5B282F18134F24C5A2
-:10C55000119FB9F5B8E03449E0ACD322CC4178D290
-:10C5600034959EB7F5A5F2B8B8FED3D66CD2738DCC
-:10C570003F971A05BF2E9DFAD245EBE67E2A39C8B1
-:10C58000DEBE796AE38705A22FDB645AB7318DF2EC
-:10C59000904B9F3E9046F47C135B407D7DFDA464F0
-:10C5A000881F2E57ED11FAB7DF73FFF6A88A1B4BD1
-:10C5B000E8DF26C4F197E4751BD475414C3338EE9F
-:10C5C000B81FB8FC06F37D0B79FFD962D8C3711F81
-:10C5D00021AFAF45321D14EF95E365BBD14EFC731F
-:10C5E0002A6CB157913CFBDEE1FAF1AC89CB2FAE5E
-:10C5F0000F30EAEF95B9BF2BC7BFD538BFD28A67D6
-:10C60000A902F132D4B7992ADFF2310FFDCCC64529
-:10C6100068F975A453F994A35F131F2B5341A2FD2E
-:10C620009FB0F8B6CEC0254F0C4ACE4DB4467266C8
-:10C6300037E2BD9EB08BAD9ED88FF28AE742E9E625
-:10C64000E7EAAC387292D633D901AB717D675E7A76
-:10C6500094F033085B7E73432E510E18BDA752C869
-:10C660001BE5A30C14761DF9FB873A59D8859F78F2
-:10C6700081F2A0CDF3BA80F2CEDFD5811A07D902BC
-:10C68000E770FE0A5C31119FE7E6FB96505ED89199
-:10C69000376C1571C58895E28A55E47FB8BD15B829
-:10C6A0009D09E793BDDC3AFD552E6FCDF43C419FCB
-:10C6B0002111DF338FED3FEDD6F64B7EBF2CF2CE4E
-:10C6C000A4F7CFC9FC2287E72FFFFD5F19DC9F4548
-:10C6D000AE70BF73792405621CB71B163875C4C2CF
-:10C6E000F3F5CB98074D4EF067AFBB041D0E453CEC
-:10C6F0005C1E0762B56934FFB4FABCEFC4F2654B47
-:10C70000484E6292B38C9F52E4350331A946C40768
-:10C7100063E8F4D76E033AD952853D4F96CF1C5546
-:10C720003E733CE2DE9E53225FF16F14F50387AA4D
-:10C730006FFE2EC6EDCA91C21CA6E1C8B946F585AA
-:10C74000FD23DCCEB6DCCB9C0179FCFAC27635CF7A
-:10C7500048B6439DE1BD826FC9B86D433DB73B37D5
-:10C760008BDB0265C373E376FA7E8F6A5766091C1A
-:10C77000F7AADBC1EF9BD535DB950BF1FB1BD0F3A3
-:10C780008CC780EF06F3466A0DE86E306FB67273A1
-:10C79000F3FEE626E73D7893F39E566EEE1E176E87
-:10C7A00072DE4737F9DE5F18E92DFC1FAD8326D70F
-:10C7B0003993EBA2C9F5CE94B7D70568EC71F6E4CE
-:10C7C0004894A89BB1AF89A1CA4A992FD8484F165F
-:10C7D000CF177581BE5A5B68178BD747357A9DAAEC
-:10C7E00013F197A36234908D749EAAC46AB3519FCB
-:10C7F0002FCF079E3F5CB68BFA00488EFC46CE3F9B
-:10C8000047FE52B4FB41BB719DE94975BFF1EC098C
-:10C81000D4BB3E257D71505C6EC0C78D2A7EE70873
-:10C8200003C76D4092F397F2F7CAF9E46F26BE256D
-:10C830009E674441D9C5CF25172DE571B45C44E707
-:10C84000DBAED6BFB216FEA088F0BA2CF4BB541FE4
-:10C85000D94675129E0738F83CED7DADB5E27DDB1B
-:10C860002DC0A89E1598C1789C0AC31319C99F565C
-:10C87000DF3866899E5BCB787DE3AA07EFF79E29B8
-:10C880005AB1BB48F085E85B31E0E07597F7E7FF08
-:10C89000E3741F7F8FA8776C7088298729DFC073A6
-:10C8A0006C3850CDE5B7F9D0FC5FAEA6B8B054E215
-:10C8B000741E138FAB79D649354FD4F2AC61CA17C9
-:10C8C00013F28EF45AD378FE30DDC8DE6C67220F87
-:10C8D0000EBC27F2E06AABB3A42B814F79B5827FFF
-:10C8E0006BA3028FD5F2DB4A2564CA413A543F6CF0
-:10C8F0008EA6A0BFAEEE9D6525BB5DDD5B98CAF13F
-:10C90000A5D6BD268DDE467C2F56CFD9777484D729
-:10C91000275E4BAA53B6D65AF9F887AAFCB4D602BA
-:10C920006F3794499BC90D4FFC4B87D9081F6FC1C6
-:10C93000F89FCEB73628CEABD5435AA2B287DE7366
-:10C940006668A497DAAAB6220FC70FDB477BC97FB8
-:10C95000FAAF5D397227C703AC32C557C9FB5EA871
-:10C960001338E26B149010BD1648219A57BD40E26F
-:10C97000FCCE6AB1F37C3CCB02E674EA370A7F5600
-:10C98000D530C9437D589EC9FD71D55139735D4578
-:10C990003CDFCF5AB07132D1E9DBEA441A6E306322
-:10C9A000AAE2213E7ED73A51C7B11356BAF73DC32A
-:10C9B000FA3A9156F719AF4EA4D569FD0D5FEAEA30
-:10C9C000CA7E69A49EF095EA0367789DD81F668E9B
-:10C9D000BCA278FDC83F306AE5F455EB4638DF4A23
-:10C9E000EB067A44FD681FBE9FDA30DE57C173BC88
-:10C9F00081F7A53682F7A5E7077BA6F336DAE3E4ED
-:10CA0000EDA19E79BCAD46B1C9CFA2BAD328AF3B48
-:10CA1000DD5BCB248A53B5BA855697A8CDF7B613FC
-:10CA20009D12EA16BC9F5CB730A78A7CD47FD4E203
-:10CA3000DC8DCFFDC76CDCCEBA226BA7515CF6D57E
-:10CA400071DF3407AF0364F3BC5293874B8AD39EE4
-:10CA500049F980D769A77A41F5E079ABCCED4EB4BE
-:10CA600000F2087F8A5929EF273A283C9E73D9891A
-:10CA7000AEDF8AEF87FF1FDFFF2EF8FE485C2FB97D
-:10CA8000FDA8F29A945DD41E55ECEB12EC439F572F
-:10CA9000E0C47DA5C55CFF76788B335B13F1FC06A3
-:10CAA00091C7652D28B5273EAFA917787E1603AF2D
-:10CAB000911D7BA3D6345E1CF846AD615C645C17A7
-:10CAC000E86B107644C3FDC7D6099C6F9726E0FD3E
-:10CAD00097DE4339C5BC75707F0AF7E75F1D48D9FB
-:10CAE0004DF1775543EBB409D8AF3A990245C21FCF
-:10CAF000E9EA0BCD0D26C59E61544F500A4C28B76C
-:10CB000063EA060D266EDF6FD40D1AA433BCAFC6E0
-:10CB1000E9F78CFE7A421123FA87829467BCD6C16A
-:10CB20009C8330B68E801B17C03CBC45C3095E5742
-:10CB3000767631A72C7F7B7D2147C5193AC399664C
-:10CB400092F396B700E8BBADB17586061EEF57C1EC
-:10CB500053C15AFA1EABD4E4207F968C17909C9058
-:10CB6000FF4FC60947547F34A2FABB87D5F8BE4AA7
-:10CB70008D4BB475C9FCAF53FDD378B8634D9D8818
-:10CB800027B63454F511FF028B4D407E604B83DB9A
-:10CB9000569AB09FB94E7C47B39DEA169312EB1696
-:10CBA000A23E915CAFD0EC54F5E0D7F5C4FF1D1167
-:10CBB0008127F9F304BE597DD07594F43E7E4E7101
-:10CBC000BF1DC8E3188FA39C9920EE0536817B71A9
-:10CBD0009CA16AF19787D2887E5EF45764978E9500
-:10CBE0006E4E277BB258AA6132C7BB6FE0DF844F1D
-:10CBF0002DFBA06D2190FF5F31FB38D17DC56A0B05
-:10CC0000FF0E49F357CB3E68AA17E3BB1E4BA5F1B5
-:10CC1000E9CC6997E979839B9E2F7A394A481F2C82
-:10CC2000A1D3A1DEC48E9D93485F664CF595D4E1F7
-:10CC300079AB1B551C7CB5F0AF2B228D16481FEB32
-:10CC4000EF0E177EC5F3E82B916A8E6F6753FDB523
-:10CC500022EE2FAA0FA01F9AF0A7F34375750E4E70
-:10CC6000CF5BD10FD179B21A459D3099FF6695FF00
-:10CC7000E3F995F1EC28F911D33CA1372C2FEE7F85
-:10CC800065CAAF6F8BFB614718FBB9DF807BABF6E2
-:10CC900029739C38EC21557EC7FD7E23FCFDE0E026
-:10CCA0000FD4FD99E0E06A9EA3E1E15A5EF49E4A4A
-:10CCB00067AD7D5F6D93F1320D27CB5500BABF0193
-:10CCC00027CB251C2D8BCC7605C7EDF2D533DCC0E8
-:10CCD000CDA259A6EBE5384FC5ED34FC2CE79E7E7E
-:10CCE000467146210436917D19B2826BEF24FA6EAB
-:10CCF0008FC126D2EF50238F73869EFB55EF2FE80E
-:10CD00007BC301E620F7D3D17F9CFBE90E8C6B78C7
-:10CD10003C14B92070AA7EF1BD694798294638E8CD
-:10CD20006F55FF5CAB00B71B1DEA777DF50342AF83
-:10CD3000E338D14352224EE4976393B5EF0543C2E3
-:10CD40003F197ED7D70923FC7BC0CE36E68CE2F3B1
-:10CD500064DC28192F7A4AFD0E705CDC48F96EDF1E
-:10CD6000FBEDAB9B30E933025355FCF99447D88572
-:10CD7000261F63B4BFCDE46DE7DFFD1E640EA3EF95
-:10CD8000478FA972BF48C56F5FB40A7978F17616EC
-:10CD9000A2786E11089CF6C5836B397EFB62157311
-:10CDA0009AE89E2A5EBB50A5C78C385EBB83F0DA3A
-:10CDB0001FA33B219C7691CA7F80107F4FE3CED486
-:10CDC00028C51B4F58FAF3481FB5EF8D1EAD13FE53
-:10CDD0002E3505BA8CF4335CE77AB48ECF1B37BF9F
-:10CDE0003C596710EF14D58A7D4FD7E9BF2F4A8889
-:10CDF000D3CFD0BA84389DF793E3F43F155EFBB7E9
-:10CE0000E3E3C555C6F1DA98797B6E12B77BD68815
-:10CE10001E9B55FC2499BE4ABD6687A73838EE781C
-:10CE2000E3FC20EAB92AEE35A4FAB920937F79070A
-:10CE3000AF7F5978FD4BB333C10962FF89F5C2EF6B
-:10CE400068ED4C75FFA0C518A7A951E7FD305FC973
-:10CE5000A8C779E52FE971B359FD7ADCECD6709655
-:10CE6000AE3F3B7A8B6E7EF5D162DD784D6CA66E5F
-:10CE7000FCB69355BAFEFCE1DB75F3EFF8DCADEBE5
-:10CE8000FFD5881E37BBF3AA1E37D3E4DB8512918A
-:10CE9000B8CE63FB996E5E419BFE5E855DFA7B4D6D
-:10CEA000EBD6DF4BDBB728A0BF5F49507FBF2CC25A
-:10CEB000F52BFE785C7F6FADACE2FA25765AB7BDF4
-:10CEC000A1D44E714C6EBE90576DDEFF0085A782D7
-:10CED000721032000000000000000000000000009E
-:10CEE0001F8B080000000000000BE3146060F85185
-:10CEF0000FC1D3F9191836F323F8F4C0C7981918DD
-:10CF00008E83302303C33E20DE0AC46B80F83D03CA
-:10CF100003C352203D07882703711710BF048AD529
-:10CF2000B1623787858D81810D884F02CD3AC54C1E
-:10CF3000BCFD8A7C08F6215E0686B5407C9497BECF
-:10CF40006130D8F00C41FAD9F50C6AD76ED181F76F
-:10CF50003708B38A3330304A20F8FD12A8F26CE269
-:10CF60000876960C65769501F50300295128158001
-:10CF700003000000000000001F8B080000000000FC
-:10CF8000000BED7D09785445B670DDEE7B7B49BA28
-:10CF90003B9D9095257480202A4BCB1201113B219B
-:10CFA00089010306440928D26C2184249D01661E50
-:10CFB0003EFDFF6E0842C4D1898A1AFC195F83E0E6
-:10CFC00004079DE0A0139DC0348B8833E804C70597
-:10CFD00097795F401E204212A338E8F3C9AB73AAC9
-:10CFE0006EBAEB763769B7FFF97FFF840F8ABA55BF
-:10CFF000F7D4A9B3D5A953754F149D9124DD40C82A
-:10D0000025F8A1E5AB0A2124255876489DC3E58182
-:10D01000C1F6B55E1771190979C06BC272BD379D33
-:10D02000B8AEA0CF47EB8AFC1642EEF7DAF1F9E38F
-:10D03000DE122C1FF59662F988D78DFD1EF29663DD
-:10D04000F92B6F0D96F77A8BB0BDCEBB0AEB372A62
-:10D050000BD2605C425CA6AC64423C2F0F1CB981D1
-:10D06000D6D6678E4F9047D3FA5FF5449F45DF1BB6
-:10D070002D17F987D206B9A4286B74B09F8AE78D63
-:10D080004A5E5F80F3F8581DEB67AA792D3B72BFAB
-:10D090002C3286E2395646FC89A564727672C47ECB
-:10D0A0008301DE2343D93C89DDF9DAA0C8F0AE065E
-:10D0B000780F0DE5F825DB270F8A0CCF09FD7EE5FB
-:10D0C000E4F0D23B0F0F8CDC6F0CF4AB7372787D05
-:10D0D0007DA60191C71D0FFD62E013C589105F8B0E
-:10D0E000D19F9DF5FDF9455CF42FC5A763AF79EBA2
-:10D0F0000609F9370DE8B4D6BEFCCC163A4E7BCB08
-:10D1000030A7DE41C8672E6782DD1213DF6E81799A
-:10D11000C4C0B752182706BECD8D916F0BA05F0C0F
-:10D120007C5B02FD62E05B658C7CFBD94F846FF712
-:10D13000021EDF836F1B62D4B75FC5C8B78D31F2A3
-:10D140006D538CFAF6648C7C7B2A946FEA73B5DCA1
-:10D150004124B48B372A253BA09F27B3CD3620EB43
-:10D1600027C1BF3DDF53EFF6C7C8BF5763E4DF11E8
-:10D17000A04F0CFC3B1A23FFDE89917F1FC4A877C8
-:10D180006DB8CE58E4AFDA8610FCB93400FEB5D8DD
-:10D190004F5DCDEB7AC03B89908C7039504BCA51B2
-:10D1A000940799B8DBD9BA55F0CDA51C425698E83A
-:10D1B0007FE9FBBE3C12D0D3F17D36E2AF9584FE11
-:10D1C0009F039E84E47F732955E8EFD345EC4F74A9
-:10D1D000D0FE30C815E5FF66EF102CEBB91C6D2EA4
-:10D1E000D2A13CF8920D285F4F789DD8DEE01D8BD0
-:10D1F000E5635C2E3772397A00E4EE0A90C3522E52
-:10D20000574CEE0829719453BA76EC89271B1C28D9
-:10D21000576609F09499BCDDBBE7CAAD1B28FCCD6D
-:10D2200035BA2BB785C8D91345AA7C51C94C0EF61F
-:10D230007BA2FC846DC150A4B70DE03414EBD47E06
-:10D24000BED07E0DEEEE7EBDA0DF63C55CBE641277
-:10D25000081DF7B1D2EE7EE912A5CBBD12296DB241
-:10D2600084F3658AC4F4942A0AF243E6F4DD9F77D6
-:10D2700096B4D1F76DF6916984964F827EA2FE39FD
-:10D28000B054DFAFA77476537A641A494D13E04B5C
-:10D290005A2585E22B8F7524821C3D34CE45242BE4
-:10D2A00021FDA19D8EDF67741BC9A265E2F83622BD
-:10D2B0000D837EB49DD653787BC650DA4EE13C0494
-:10D2C000EDD6607B2A6F4F73F0F7AF63ED0F7B09EC
-:10D2D0008EAFF6BB8FF2D94DF15B47F1C5E7C5C400
-:10D2E000057494293BFD21F39F2DE971DE95BC5413
-:10D2F000F1BF2FFB54C6FCA1417CCD832F66CC0F20
-:10D30000C1EFBEC173B0AEE263BEA212EBFD57F532
-:10D31000A69E18D707124EE7D49903847687EC446B
-:10D320003FCD71444F7C945F0E2A9E91F8F3051512
-:10D33000E71F54FF5C8C1EDAF6BB3574589721D278
-:10D34000C1D05BA4C3BADE221D0C7D2E4F8729926B
-:10D3500003E147A3873AEE862BC571E3AE12C7DD22
-:10D360007095386EDCD53FCCB8EBFB89E31A33C53A
-:10D3700071D7678AE31AFB7FBF7189ECA40F99B953
-:10D38000200EF8679E60DF2E10F7C3A0DF60E7F481
-:10D39000C9413B27DB4B88DB12E42791E9CB39A15C
-:10D3A00070EE14EC2A85F37F381CD7E5E1D8357090
-:10D3B000E66AE16CE37048A89D0E8343EED0CEE3AD
-:10D3C000B7FCBD802E647CBABE92126BE87B4ECD5A
-:10D3D000F8B76BC7DF0D760CE6A1BBECF80E0D5D60
-:10D3E000E768F1D9C3E110DDE5E841EC1A38B3B5DF
-:10D3F000700E713801E9B2704AB5F3785DE5AB247F
-:10D40000AC5F941EC382EF75E4759E423FE845C54C
-:10D41000B19DB64B7FB2066EA0FD8F6C91FC465A53
-:10D420000FEC8DC7F5E3FCB6E958DF778D11D7898E
-:10D43000F3CEC97E23B527935E78DB06F6A5EA0511
-:10D44000BD0C75DDDE8F6D6D142F8FB1F5C1EBE86E
-:10D45000F3CE17F4642B4A63A10EE87E8ACB2659DB
-:10D46000C5EA656656ADDAB2EF4E805BDE6C2466C7
-:10D470000AA7EAA525D3AEA3F5258715025DAAB6AE
-:10D48000AF36F4A6F5A57EA909EA1D79A41CF469B6
-:10D49000CDDEFF6C87F5E8FC6E251BC63F4BD70938
-:10D4A00007B5C747ACADA933291E15FE5D85F05EF3
-:10D4B000C54EC9492D1CC577FBA10CC07787E43444
-:10D4C000527A2F6B8C270ED5DED1BFA776EB71FE7B
-:10D4D000CBE9FC0985B784D417023DAB803830BE58
-:10D4E000D3E8374B417D3BEB3D8CE3A9F5AA1D7496
-:10D4F0003CFA7EF5739213A65AAD236EC0B3FD2598
-:10D5000073E9531698E76AC3602BCC6FBD01FA2DFF
-:10D51000F1CF7FD1EC003CB7180A01DFCD5B0C6581
-:10D5200043817E645EC950C0EF2F227E0D7A17CCF6
-:10D5300077F935C6AD7AE0A72530688635DCCE9E12
-:10D54000A5EB952364FDAC20CCEE13D96F983E2C4F
-:10D55000F8FC257D22CAC1B2463D7184DA0D2E1F2A
-:10D56000BEA384F9317BACFEED59413E2EB77379F1
-:10D57000E57C5C9EC8F92A77E6CC18168ECF83C06E
-:10D580001723F38FA07C98AE9B0EF47F1C48BFC777
-:10D59000A8FFE440FFC889CF9FA07E12949BA99F5B
-:10D5A00004E593D44F82D24FFD24E8B795FA495051
-:10D5B0006EA37E123C7F9AFAE7503652FF1C9E3FC4
-:10D5C00043FD7228777A7DF8FC396F1D964DDE7A1F
-:10D5D0002C9FF73660B9DBEBC77E2F7A1BB16CF658
-:10D5E00036E1F397BDCD58B6780358EE053ED332F9
-:10D5F000E06DC572BFF7189607BD6DF8DE21EF1913
-:10D600002C7FC9E96E9B4072652A2F3617B1039BA8
-:10D61000928A5DB9E0AF2495B07AEA1DBE5C03AD95
-:10D62000A7BA699DD2B1776520D748EBBD6B587B0F
-:10D63000E63D24CF44EB993ED63EE097AE3C33AD79
-:10D640000FA867ED8337FBF2E2687DB09FB55FB549
-:10D650003390174FEB5735B1F6E12D649285D6879D
-:10D6600007587DE411D7242BAD8F6C65F59C0F7D99
-:10D67000936CB49ED3C6DE1F7F2E302981D6C77728
-:10D68000B2F6895F937C3BAD4F2412D6F32CB9F9E7
-:10D6900089B49E6767F5C2BEF3654784F57DAFD256
-:10D6A000B6104CDACF7539B932F513F61ADA56805E
-:10D6B000C95DAFBB21571E47E9A79045D0BE49576A
-:10D6C000C4EA06B212DA7FAB9B8EF5FD8A03DBF764
-:10D6D000E8E6B0BAC181ED7FD52DC4FA41C585ED2C
-:10D6E000C77595AC6E7061FB67BA9FE37887143796
-:10D6F000B62BFAFFCDEA0637B63F2CAFCFCDA7FD4C
-:10D700002BF56E8F8ECA75ADE42E2703415E9BD23A
-:10D71000C11EAEE37EEB2C9D03E57E5D8601F56CBC
-:10D72000EF7FE53C857A063FC9502F7B1AFC5E0AE5
-:10D730006715C251281C7DCF70267E33568033F189
-:10D740009B7215CE6A84638E0DCEDE6FC68BF87C1D
-:10D7500053A1C2D9A0A3F6BED61ADBBC265E9A207E
-:10D76000E273A95285F308E293181B3E01E55A01C2
-:10D770004E4059A2C2D98C705262C3C7651827C0E7
-:10D78000711996AA70B6239C8CD8E0040CD789F83E
-:10D790001896A9709E43FAF48B6D5E2EE3F5223E37
-:10D7A000C62A15CE1F109FACD8E0ECB78AF4D96F0B
-:10D7B000EDA64F00E164C736AF3C9B489F3C5B370A
-:10D7C0007D5E433857C60667BF4DA4CF7E5B377D6D
-:10D7D000DE4438C3629B575E82489FBC846EFA7CED
-:10D7E0008070AE890D9F8329227D0EA674D3E72415
-:10D7F000C219131B3EF9A9227DF253BBE9731EE146
-:10D800008C8B0DCEC154913E0753BBE9F305C2B9D1
-:10D810003EB679E5A789F4C94FEBA6CF258493EBF3
-:10D820006E447C0885638D0EE7503F913E87FA7504
-:10D83000D3C7A407380514CEC09EE114668AF42924
-:10D84000CCECA64FA21EF462726C700E658AF4399D
-:10D8500094D94D9FDE88CFD4D8E655D85FA44F61C8
-:10D860007F461F8FB173921DFCC644E2DC4A5F996C
-:10D8700094FCB383B0EE2816E204B047A4C036800F
-:10D880004FD756F44B65A7EA073909F8B9C536876B
-:10D8900013E2017AD5DF21ADB81FB1EC4C14E24D93
-:10D8A0002FE9F38603BE56EA1586FA3D0963E304C1
-:10D8B0007F2BD19524D47B15F516FAA7940C10DA9A
-:10D8C000D34AAF12DA33DC23857A9FF2F142FF7E2E
-:10D8D000357942BDFFAA2942FF2CDF0CA13EB06E74
-:10D8E0008ED03FBB7E81D07E454385D07EA57FB95B
-:10D8F00050BFBAF15F85FEC39AD608ED239A370868
-:10D90000EDD7041E16EAA30E3F21F41FD3BA5568C3
-:10D91000BFF6D83342FBB8B6E785FA75675E16FAEC
-:10D920005FDFB95FA8DF70F1CF42FF5CF237A13E45
-:10D93000C9F481D0BFC0FE91D07E63FA271A3F564A
-:10D940008C5FD4E612E6CF6618D09F0D580D58377D
-:10D95000EC35B3FD0DD493210E518C75C3FE858E2D
-:10D960006488070000EA4FE4F62EBF02E255BF18B4
-:10D97000EFBE02E2B8BF30B847D823F841EDB2FBA2
-:10D980001E3DC6135B25920EA54307659C9EC713DB
-:10D990008C4C7ED767E53CE50BD183BA7ED4BFA023
-:10D9A000F5F57A8AC798A0FEACEF57963E3F649C87
-:10D9B00075FD0CA55B87B2E70B2D305EC97D309EEF
-:10D9C000C7D03918F0D28E631C305618C794598EC0
-:10D9D000E36C84715282E31833CB35E3984AB7F293
-:10D9E000E77C9CC7406FA28DB37EC078713E9915CD
-:10D9F00038CE16CD38EB332B34E3C4B1F9D0E77C05
-:10DA00009CA72E378E71E004713EFD2B719CE7B40C
-:10DA1000F3E95FA919C782E3C0731887F4A5BB981F
-:10DA200034CA67636719CAC19FCC182733F4A9F8B1
-:10DA30000DD4C90766920DE338E8B8B41F199244B3
-:10DA4000859A907FD127217FBE88A3FC0F89A705E7
-:10DA5000F7E33EDCD72FE628123FC588EE93AAB93C
-:10DA60006C2EDA393D73858396CD07063D02E36C53
-:10DA7000B43AB369BDBD7992616104795A5CAF9CD7
-:10DA80006A0B91F3EEFD591E195243C75F116747A8
-:10DA90007CD4BA5A26E9C4E727E8BE8BD0FDC987F3
-:10DAA000749F42E87EE52385ED33FF9DEECFA0DE37
-:10DAB00046F767D04EC86A7CEF048F339FF8A5E421
-:10DAC000077A7F71D7CF145C277CE4ADF4548826A5
-:10DAD000B09F79ABE2291382F8CDF7F512EAD41C96
-:10DAE000F7D1A5E3BE16E3079D2F19FD5B81AE7547
-:10DAF0007D284D79BF0184BCBB77EA21C986D53E1C
-:10DB0000BAB184CCAC995E90865A24F55B4EF19CF8
-:10DB1000B1FB1A85BE41DA95B63B9D96205CE25278
-:10DB20004E007D4CF40FC0B9A588D643C6BFB5449E
-:10DB3000ACCF2272B04EF97D523F80B0F83F1FD774
-:10DB4000E15280AF25748E1994D5B3A01C09CD2C59
-:10DB50005E536A67EFAAF878162A2480FB6B5F0A87
-:10DB6000C4B1892F19FBCD51F7C91AFC4A1593ABE3
-:10DB700084D2B574BE1EE9AAC5F7FDBDF12EDD70D5
-:10DB80005AD63DA24068B627FC67BBC57652CEC6C2
-:10DB900053E9AACACB29CEDF13C07F5A9E06FE5393
-:10DBA000BC4F72FE07E598F1DF63744F03FE776E9A
-:10DBB000D213E417E7FB6D9CEF8BEB45BEDF06E766
-:10DBC00071B4FF6D2BB358BCA9A197C05F3A719196
-:10DBD0000EF50F1550B31A86FFDFB91CCCA9DBF583
-:10DBE0000AB0F7F672CDFC381FEEE47C98ABA1C703
-:10DBF0006D9C6F7339DF9610DFBD1918BFF02B10C5
-:10DC0000D79B5D2E11B0179EBB55BEB5097C73AB7B
-:10DC10007CD3E07B27E7DB9D7731BE69F16EE37C47
-:10DC20006B6BF84C2103C2F1D6E2396F95665E3E0C
-:10DC30002DDFEAB95CDA0DE04F4D77E5AE3819D249
-:10DC4000FF96A2C92B4E86D8855B4BA60BF559A52E
-:10DC5000B385FEB3DDF385F6DBCB970AED736B7E00
-:10DC600026D4E7ADBA4BE83FDFB75A685F58779FD5
-:10DC7000D0BEB8FE21A1BEA46193D07FA97F8BD076
-:10DC8000BEAC7187D05ED5B44BA87B9A5F12FAEB1D
-:10DC9000F65E7933C8D791B7F504E27D179CA731BA
-:10DCA000CE78C1A938A1CF49AF03E5F8947708969B
-:10DCB00067BC4E94F3B3DEB15856834C8E033B7B66
-:10DCC000C002F1534F1CB5FB89741D97C7ADA99BCA
-:10DCD00000EB0D6D1F4FC8BFCA37ACF1F5A55A0058
-:10DCE000716F4AFFE20603098C2254BA7B77CB732B
-:10DCF000A73EA4BDAD87F60699047A85B717B74548
-:10DD00007EDE21750ECE80B8EC7B46B23D24DE1857
-:10DD10007EDE42FA805F11ADFD9C8E94879EF76C8B
-:10DD200095D939CF117DDE5699E2556960FA5FF9D0
-:10DD30007C461EB1413D30B8C67299F19A283269CD
-:10DD4000C0E78182DE2F69B83AA8E704C661F6749D
-:10DD5000A97F94F07C59E375C27B6F48EE2D80C794
-:10DD6000B97D7A5CAF49E040E62DC3003FD7561934
-:10DD7000D6D1E614F4BB5ABDAE15271542DEF41613
-:10DD800061F996B704CB77BCA5581EF3BAB17CDF16
-:10DD90005B8EE587DE1A2CFFDDBB0ACB36AF0FCBDF
-:10DDA00013DE3A2C4F7AEBB13CE56DC0F28CD78F85
-:10DDB000E5596F2396E7BC4D58B67B9BB154ED6790
-:10DDC0004FF27786AFAF67410E8DE1727670EDBC92
-:10DDD00035757D837276582E433953E95BDC60E4F8
-:10DDE000F2902AC8C35F611D4E0179E9A1BD41E1EE
-:10DDF0007218EDFDC8ED206FBD7F047923640DCA54
-:10DE00008105E4EE7BC81B8153841490A73E1A79E8
-:10DE100012E550952355CFDF904ACE817CA97265DB
-:10DE200091993FA4CAD5FDE02746F0B77A2B125F3F
-:10DE3000FF987F4402B93A20D9727E5E417C2EACB5
-:10DE400077F1B16B29B856E827FB87C03AD235E4A1
-:10DE5000ABC110DFEF3A4685202BFAFCB4F2129DDD
-:10DE6000EE2EDC3F94F929F37B85B79BE3185DCD5B
-:10DE70003A524446C2F972CE3137E567DC9FAE1E96
-:10DE800009FB66FA5C264900C7EF9C1EE1BC800CCA
-:10DE90002248E79EE8ABF63FF5C47FE6C0B9BF0570
-:10DEA000F49CCE3DEE80BE86E9EF53CE5B42CE972A
-:10DEB0003C46673AC4C13BB30D76E63F4C12E94895
-:10DEC00026E1F9814AC703D95F0C86F399FBA81CA8
-:10DED000827E750D1A9C402E231F3DD9FB9EE8B90A
-:10DEE00000E61B133D0D04CEB9283DB7C27DC758CF
-:10DEF000E9D9939DECC93E9ED8C0E87C84FBA7D1AC
-:10DF0000E8AC9E8769F1B84591391FB81C933B3442
-:10DF1000F42F15E8DFD7EAC0FE07F77E9009E7780F
-:10DF20005DBBAF48204343DF2F60E73DDDEFE70BEC
-:10DF30007A20FDE9EF99B03F3EF8C2BB58AE254CC0
-:10DF40000F375A4AE62A6382F062BD47106D5E1EA3
-:10DF50004512E7D5837E76A4AAFAD99A09F2B49B32
-:10DF6000DB81B0F9F5209FEAFC0EC0FC289CA920BB
-:10DF7000D3741EF972C95DC2FC46A7E0BC7B9A9FB0
-:10DF800027C140A411143FABC14012A83C2AEEB5F2
-:10DF90000AEEEB9C6D3E8853EC8D77D65296786CEA
-:10DFA00067DF0838E03D319EB1ACD15C23FA4F8980
-:10DFB00035A2FF945113EA3F751D7ECAE6A6F82DDF
-:10DFC0004FD7D79CEC05EB9C8BAF736C5D55F1ABD9
-:10DFD0006ACAAAB10870C47A57BD54C4EEE13812B7
-:10DFE000664638EF53CBE5E9061CE76CE3C004183E
-:10DFF000F7ACD754C3D6577B0D1B37BD26747DAD08
-:10E000005C155F73725410BF68707F68FCA8449001
-:10E010008F4CB02ED2B681D1FB47E5A7FCB901CF1A
-:10E02000D55B942FC07F370F51FD7719EB2A5C4FDA
-:10E0300093DE671C01CF770AE3D1F71CEAD938BC1D
-:10E04000175D6E64724AE5A71ECEBB08DF1F98906D
-:10E05000CF6E0A3181C2EB902D7520577E85E9B3D2
-:10E0600087CB6995A9CDE07620B95B41AE178C5579
-:10E07000E5DC31EB036AA73FFE8B82F7CCC8D714EF
-:10E080007A4EF0AAC322526283A0EA82DDCB8A6173
-:10E09000DDFEF8C59BF83EBD3E07E67D9EE88AC0E2
-:10E0A0002E9D276FDA4685E8EB6985C5B1481DDBF3
-:10E0B000E7F8E81F98DFE27A71DFB3A441AC9791EB
-:10E0C00019A9606FCB362AC44F715F0AFB2675DE33
-:10E0D000D4FEBEABD811B925A4661DECD31F53588E
-:10E0E000BC67819DC87DA8BDAEFAC3AF7320EED3D7
-:10E0F000AE307F573D0F5F9AC4F6831533FD061788
-:10E10000EDFFD1EE51B7518B4BDFF7AF43FF673ACD
-:10E11000716E27E1745F5827E2D713FE5A7C553F92
-:10E1200028EC5C9EE391DC2845BC2FF535B773AA3B
-:10E130007E2419EC42DC274D5357E540E172E0574D
-:10E14000DC56430AE33BF051923B0DEE907E866035
-:10E15000BF24C398E8FD8CD04F8FFDD258BFCE426C
-:10E16000DC1F132A4F4383FDCC41787DD9B862BFB1
-:10E17000AA3F3CFBA28FCA4BC5EF1EB511BA6E7EFB
-:10E180002CD7A73AE9F3CAEDF7DA5CB43C23FB6C71
-:10E19000C0CF8FFDFA88F77D6F31A8F470592488BD
-:10E1A000A771F924753E8C537CB15DB1E33942A36C
-:10E1B0003160A4F259BD7B6931198EF5E3ACBEFE26
-:10E1C000533DD49B457E55FCE6D15407BB27C4E2A2
-:10E1D0004924807E6EF5B6FF2884F5C2433A51CEBD
-:10E1E000B4EFC1F8179350AFE71B12C2DBF16270B6
-:10E1F0002ABCCF7E3CBBEFFF546F8372F269D02301
-:10E200008F464ECAB9DF0AF482FD7EBEC19A8CF6F3
-:10E21000FE5A722DE8BB4A17E267FE6BED8EC78788
-:10E220001FA7789DDBF6179B3434D44E3079EB6A08
-:10E230005AF86F265D747BD24EE531D44FA280F13F
-:10E240003D4733F7BB5B5859A9046C701FA7728B0D
-:10E25000E2A492482A9FD513B89F40DE33FA213EAC
-:10E26000BAECD957DE194FE9BF6C97925CCCA66324
-:10E27000915283FCF1D0BFAB4606F951F1FB570C2C
-:10E280008E61ECF93D4941BE2CDBB5CF408685D38C
-:10E290007152D33E439B25027F9A8E17C27A5BBB95
-:10E2A000E31F06882B7EBC57226959E1EF976F79EF
-:10E2B00005D73DA013F293F3AB9B7F617C0B4C7BA6
-:10E2C0007934F6B3833DEC896FD9B09F4B41F97E29
-:10E2D000EE65B8C7F4BED10974287F6E850DE6736C
-:10E2E0005AAE6172FEEB7B5341DFCB155FAA1D4B2B
-:10E2F000F6BCFCC99FA3FC2D39FAF354F41F882BFC
-:10E300004387B6D99701F35CBCF9569C671971A392
-:10E310001C96FF5A5F02F74C2FC8A46857043DF9BA
-:10E320008B81ED5F4E6FA5CCA5F33C0DF8817D7B15
-:10E3300053EFDF8E71F39FE13DB89FF339D3951012
-:10E34000EB174C8C5F5B0C3A351E6A12E477DBFAF4
-:10E3500056E0D3D97EAE3438F7A074F071BA49973D
-:10E36000285CFDD18234C627E29073F87BD4DE4F5F
-:10E3700082E7D0BF557199870BEF71FBC8C65FC9A3
-:10E38000C7A778C7C1FA753A35B2FFF70F3E3FFA13
-:10E39000D34A42E42C44DF99FE6FBB8FE9BBAAFF4E
-:10E3A000FEE945D0FEF95B4C8FE03D582F285E8199
-:10E3B000346CDF375342FB40F7D991F47C9BC2F5B4
-:10E3C0005C6CA73B1C5CFF5539A1F8CB5242A8BC42
-:10E3D000D07192900FB83F2EDB48DF0FF1CB3C306D
-:10E3E0002EF633049F87AC1B4BB85D38A4B107648D
-:10E3F000734A4C7E74A5E27FFA09D0DFF78C4E9FFA
-:10E4000003F4572981F97FB2F3C03B73A89C7FD2F4
-:10E41000A4EAAD6857B57A5BFEFC1812496F3FB1AC
-:10E42000D07D5724BDA5CF23EAADA50DE5F9FF9614
-:10E430005D55E9D7AEA11FD8C7971DD1E9A8B58F03
-:10E440001B0C8E88F691FEBC4572C2E550953F5577
-:10E45000EE2A7E5BD51FEC50B77CAAF2D72D9FAA7F
-:10E46000FC69E72BD24FDBFE07D06F8AD7EDA64DB4
-:10E47000D3C07F3675128CC3E7CED4E33D4DD3E7CE
-:10E4800084DDD3B8231EEBB3F46DBF079FF083AADE
-:10E4900059C3609DBF9DF814766E5FAFA01FFBF55A
-:10E4A000A54B13E87CE670FADE4EC93D95F2A35405
-:10E4B00096027114CFD932F12524413C59222742CA
-:10E4C000F0B8BD5CACC3CFC4D4209C9EFA7F5BBFC8
-:10E4D000FBBB9647295F4F6413F2372871FF411D3C
-:10E4E000EB10799ADEC2CE313CA325FF00D4C336AF
-:10E4F000B924641FE13132FB7334FF963140BFDC35
-:10E5000059C312989C0FC6FDA287DBB12E9F230131
-:10E51000EC7B57CB40DC17761D5E687547B067070C
-:10E52000B89CBDC2CF613A2C52BD9ECA7D07E9445A
-:10E53000BFC66731478CCBCD31AA769AF38DFEE802
-:10E54000E9F8A55C0E67D357134686F06DE6D48FC5
-:10E55000655B381FE0E744C8BEE2FBD217E41AE867
-:10E560007BC0DC565812217E53C9E93771FF9706EC
-:10E5700058F7F25B7265A063BE452FC4431619B904
-:10E58000BE0E254301AF89FB973E3086CAB1E7B086
-:10E59000DE69A6F3F3B47C6A7047D8DF69E909F055
-:10E5A000C1BFDC6A64FEF2DB4AC962A0EBDBB7B232
-:10E5B000F3DEBF199C5591F04C37337F733629B980
-:10E5C000305AFAE9D1377796359047E9D16561F746
-:10E5D000B5C3E58FE97D975DF2AF96400EF5AC9E31
-:10E5E000CCEE371712F7031324D4F71B42ED576E06
-:10E5F000F3F467E13E4D758B64D7D1F66AB9CD006F
-:10E6000072EC69DE2583DF7E9383B8707F2DD70C93
-:10E610009B1912FFA2CB1ED2EBC05773E6027D3FBF
-:10E620009B692480976BE8A73658FF3F6B19857A62
-:10E63000106D5EAF7BC9B47C05E0307BA69587C2C8
-:10E64000E478A17EEB24D217CE81271ADB5638233B
-:10E65000F02FDFC4E42C66FB66FAFFCCBE4DA0F6BB
-:10E660008DC9B5126ADF2CA630FB9616C9BE2D5F88
-:10E67000ED4803B958BE67207EBFB5FCB5C52991EA
-:10E68000ECDBAB7CDFFB1ABF07DED197DAB71121D9
-:10E69000F6AD2FB56F11E2E45FC46ADF4CFF33FAC9
-:10E6A000F72AD8B708F3359B44FB56D4B21AED5B72
-:10E6B000515FBD705F8998A87D8BBF9C7D9BFFE8F3
-:10E6C000AD58579CF111E407E80AF6ED356EE760A6
-:10E6D0001CB0733798587C33563BD72F563BF73FC7
-:10E6E0004467D5CE2DEF27A1FF122E87CCCE2DCF9C
-:10E6F00062766EF91E66E79667333BA7B56F796160
-:10E70000F68DBD5F3D84BE8FFBC7ACC7EF80FB8439
-:10E71000A58AD344FB173BD4EF276AC684DABB1B18
-:10E720004C32D239CCDE393FC5EF607AB2777F0503
-:10E730007B978D766C10E891563EA60C8A17EEB347
-:10E74000BDFDE5A9DFFE0EF4E5753DDE177A57C77E
-:10E75000F6477BBF3C350AF4EE2113B3BF4B4C8C1C
-:10E760009FED5E1FDAD3494399BE57DDC3E857BD1D
-:10E770005B62F35DA9F73B601DF8EA22EE9FE7EECE
-:10E7800061FBE759C6D69478B897F42F0A61DF7D0C
-:10E7900090E2F921F2507AB102E380CFC7D9B6C234
-:10E7A000FEB2542626F063E71D9EF231F8AFF32E39
-:10E7B000D6A1DF3B0F9EC33909BF27A1DEA398D3A3
-:10E7C000BCEB953E24FC7EC44423E3C3C415927F76
-:10E7D0004B16DC4710DBE769FCFA757C9ED49F453D
-:10E7E000BA90BFEA23C6EFD669E9E164F3AF5AA94C
-:10E7F00017E9512345A407E568F1FCD4E0FCE7BE26
-:10E80000D0B6AE0FB42F95703FA5D2433B4F953E87
-:10E81000EA7E651ED7114FCB2E05F8A59DBF4ABFD6
-:10E82000B079ABF4D4CCBF4EB51F579361A06FEF56
-:10E83000EADC0F8C01F9F833A503C5EBB6D9D96929
-:10E84000A1F6F8416E97A6BA8FE7A73A806EECBBA7
-:10E85000C439E5BB5E49A5F3B9D9953512BE1FBED3
-:10E86000F52B831BE20B07CC9D68DF54F9FA84CBB0
-:10E870007B80C379BBB73D1FD79166C98E7A13D011
-:10E88000D82F7E7FCC730FD3AB03D23FD6F5198D33
-:10E890007485658014AAEB10F081FE776A0BE38320
-:10E8A00007F840FF3B8D741E023A57274BCE00F409
-:10E8B0006FDE752FC8CDAB66FA1CF4B75C72B2EF91
-:10E8C000CB882523F5B2F22947924F0C4EE404D7AA
-:10E8D000C579D02F29DCEF98686C7D1BF09848F53E
-:10E8E000610B09F74354BE0FA17F2E45BAF7D383BE
-:10E8F0001C7FCCE5F355A0B705E8DA69007FC613A5
-:10E9000060EB87DAEE911DF9481F95DECD747D1816
-:10E91000CDE8AD8B40CF9BD53AA7A7A74552E0FDE8
-:10E92000C974FFDA4B82D3AD2F0FA9720CDFC36914
-:10E93000E901F1808C10BD07FB147A3E59DD7C148F
-:10E94000E932652575AF42E80E76EB72F489A617B9
-:10E95000D5CD3F8C5E7CA2D18BBDE6CEBF8C80F83E
-:10E96000D71E09ED03694914F6FBF166E6671C3012
-:10E97000BB517E3B5F53F0FEB9D68E7CCDE51EF6D3
-:10E9800017A1DFFD4D8289809DB39BC9472A1E03D5
-:10E99000981C85DAEF57CD6EE45734F8717C1D8EE4
-:10E9A000E63FA9F51B613CB88FE810C70BF32F7841
-:10E9B000FCA7A779A5F171BFEBBCBACF3349AB81F6
-:10E9C000B0F8FF0A63C8B9D46DFC5CA03B4E16ECEE
-:10E9D00067375DA61FC45F0274DEAFEE7C0AE3BF3B
-:10E9E000E79F393E0DE477D91FF5C444F9DCBED367
-:10E9F0004A02ECDE8501D6D98ADDFA88E72884D47C
-:10EA0000B2EF1C7F6745FB52F1BCD15F4CDFAF78A2
-:10EA1000F1A3E110B76A5FC3EC8CEF192E1FBEB6ED
-:10EA2000E170BE5E21B373612DBCEBB8BC9C7B2949
-:10EA3000BE14ECA4D4C8BE5FAD689AA51843F6E92D
-:10EA400023CD0A8E4BFBE1BD65DF0E09E3E5E1F85E
-:10EA5000AD66F07630FB57D1ACF8E13BD88AC62DD5
-:10EA6000B8BFF5347E6A00BF6ED2EF9E65DFD73641
-:10EA7000EBC5F861A33E60C438A7FEB87138D35B1C
-:10EA800049884755A15E5637F13899267EB4EC7710
-:10EA90007B5EF451D22CFBFD6F6C606FCEB66EB70F
-:10EAA000617CAE91C5DF648B1C393ED7535CAEE907
-:10EAB0003E1E979B7A9A0C0F8FCB9D85FF503D9CF5
-:10EAC0006FE6FAAAC6351B7BC5747EBEECD90B4F28
-:10EAD000C279D2B9E73F7912F0AFFCE6B327EF86EF
-:10EAE0007389BD663BAC7F9E67DEC6F8BBFADEDD90
-:10EAF0005CCEDB77FCE6E927A81EB6BF67C47B5B6C
-:10EB0000ED7B4E67C2F78CEDBBBE4C85F8E6CA3D87
-:10EB100005B89F59F9C2A4B4CBDD3F01F9F4C77021
-:10EB20007EA2E5C781DD7A02DF739E3F6644FFA3C4
-:10EB30003BCEDA54C5E2D70E1E5FDD19F9BC4A8D13
-:10EB40000756EFBEE5E6EB611DDCAD381DF89CC74E
-:10EB5000077B8AABBE45F93A2206FEEDE4F1F3A647
-:10EB6000A911E3AAE7E13F944F9BCC625CF5C2EEAA
-:10EB7000C5FFF604B4EDEE1535AE1A88816EEA795C
-:10EB80005899D9B5CD0CFAF1FC6F318E0D7CA33EAE
-:10EB900039697FF64226C423CE289D77E23DE53DC4
-:10EBA00046BC6754B1E75DD497F6178EE23913E19E
-:10EBB000E751EDA4FB879D1BF0BD8E679B95C56358
-:10EBC00039FD215EEBB0E1731E976572ACC66BA395
-:10EBD000C569DF37B3FB50EAF95CD5B60F0C4413B7
-:10EBE000FF96C602BF8E0BE78AEABCB5F0EC408701
-:10EBF0006B43CF1FA2C5C3B95D0DE3173B7768DF39
-:10EC0000C2CF23BACF1908E93B12CEC7D9B9B9C7C9
-:10EC10002FBD1B89BFEAF9C3DB5AFDF4C776EED0DE
-:10EC200033DEDF8D2EAF9AD9FE56A5CFB9AF23DBE9
-:10EC3000E94EAEEF749DE930E3B9315B67E6F175FB
-:10EC4000A69AD28D7DF7C6F03DC7F781E79ED1FB2E
-:10EC500061BFBCAEE900DA5BAD9E571316FFD28EE2
-:10EC600027C531FFA0BA79DF70B047E7F6BF84F25D
-:10EC700057BDF3B8C147E11C6AFCBDA16D6850DE09
-:10EC8000C18EFB43ECF8B9E7F60D67E72291F3B4C8
-:10EC9000D8387C4F8B08DFB3F35301FE325F93C14A
-:10ECA0006EE9799CB3B26B16CCF76CAB42E03EFBDD
-:10ECB000D9267D913FC2B89FC13A362648A77556DE
-:10ECC000F61D9F3EC9807EE64AEBD863F0FDF84A08
-:10ECD000ABC101FBEDDAD5EC5E65EDFF72A6035F1B
-:10ECE0006A136FC373A37A0D1DEDC9F65CD887DB79
-:10ECF000F34B46835869ED41A24B27E0BDD25A94AD
-:10ED0000E6B0405E2FE6A710D989DF19EA6D854588
-:10ED1000300FBD5D6737475C5F193CC5C2F266289E
-:10ED200076F1BBBFEF900783403E8E6F9D07A353E4
-:10ED30009307A3FCC6FFD7F260F8609C9F401E8C2F
-:10ED400000C677D43C18C93F721E0C882F8D0EC99F
-:10ED500083D1A9C983C1F9F8CF3C18FFCC8301A5A1
-:10ED60009A07E39D0D650590A742CD83716683A741
-:10ED700000F252A87930BEDAB08AD5791E0CCBFDEC
-:10ED8000AB0B42F36064DEBF01DBD53C18CEFB1F4A
-:10ED90002908CD839177FFE682D03C1833EFDF5E00
-:10EDA000109A07A3ECFEE70A843C186BFF50007929
-:10EDB000305E8F77B7C6A544CF83D11CE788290F73
-:10EDC0000685F31EC2899207430B275A1E0C0AE7D9
-:10EDD00044DC98E87930C2F089920783C2F904E1F3
-:10EDE00044C98311864F943C1814CEE738AF287974
-:10EDF00030B470A2E5C1A070FE0BE144C983A185C7
-:10EE0000132D0F068563884F899E07230C9F287951
-:10EE100030289C048413250F46183E51F260503868
-:10EE2000E908274A1E0C2D9C687930289C2C8413F5
-:10EE3000250F86164EB43C1814CE55F163A2E7C1D7
-:10EE400008C3274A1E0C0A6714E213250F46183E12
-:10EE500051F260503813104E943C185A38D1F26079
-:10EE600050380538AF287930B470A2E5C1A070A63B
-:10EE7000213E51F26084E113250F0685330BF189A1
-:10EE80009207230C9F287930281C37E213250F8620
-:10EE9000164EB43C1814CE528413250F86164EB469
-:10EEA0003C1814CE728413250F46183E51F2605060
-:10EEB0003877239C287930C2F0F9AE7930CC814183
-:10EEC000D240CC8381F938BBF360247FEB3C18BF80
-:10EED000027CFF9907E39F79307E8C3C18B75ADD9E
-:10EEE0007F8FC77DE377CB8371265E9337A2873C04
-:10EEF00018B75A4BCE823C7FDB3C1817E2BF5D1E31
-:10EF00000C3ACE3F2E374EB43C183ACBB7CB8341A8
-:10EF1000C7912D632E339F287930122C62FE901FEB
-:10EF20002B0FC6B1F8249C4FB43C183FB97C137426
-:10EF30009B05FBB4E9288AE427937F62B485C70D5B
-:10EF40007FA8FC1330E99C9F52FE09358F41930244
-:10EF5000EBE1FB9CEFEF70B9F880E7A13816350FB5
-:10EF6000857F2AC677978A7928A6703ECE768BF25F
-:10EF70003085B0739429F959FE5AD8AF976BF25087
-:10EF80000C11CFE98BDD47F3293832D529CEE328A0
-:10EF9000978769A59F1E04F6DC3C36721E8A199C71
-:10EFA0001FD3357499C2F9369D97B7C3A739549EBC
-:10EFB0008BCB8FCA40D7698E3619E3F437A9FC731F
-:10EFC00008FC9BC9E16AF19DC1F9376332E39F16E2
-:10EFD000EFB7807F14EFB7CA4721FFB4786BF1D445
-:10EFE000F29F84F23B247F482E11F34F4C3289F973
-:10EFF000270AEC62FE891BD3C5FC13931D62FE89B0
-:10F000009B8688F927A63AC5FC13378F15F34F4C1A
-:10F0100077ADD6E4BFB84F93FFE2214DFE8B4D9AFA
-:10F02000FC175B34F92F7668F25FECD2E4BF7849C5
-:10F0300093FF629F505F58F79AD07F71FD51A1BE38
-:10F04000A4E13DA1FF52FF71A17D59E3C7427B5569
-:10F05000D3A742DDD3FCA5D0BFA7FC036FF1EFA17E
-:10F06000DFE1DF431FE3DF43BFDF43FE8B772C4B42
-:10F07000D785E6BF78DFE2590779098E5B1C3CAF84
-:10F0800040E4FC16DDED51F25F04DFFFF6F92F528C
-:10F09000927FF87C043A2BFB1EB0B7254F674DF9E1
-:10F0A000EEF9086E2D11BFEB9E552A7ED7ADB3B297
-:10F0B000EFB567BBC5EFBB6F2F17BFEF1E11E7960C
-:10F0C000000F6DFE8BDE1697CE0AF692E72908C078
-:10F0D00077BAD9106F2BC2F220E4BFC886785B29BB
-:10F0E000968721FF052DFF0CF92F687904F25FD078
-:10F0F000F20DC87F910DF9337C3C7F461DCF9F51A7
-:10F10000CFF36734F0FC197E9E3FA391E7CF68E20E
-:10F11000F9339A79FE8C00C239E13D8CE5496F2BB9
-:10F1200096A7BCC7B03CE36DC3F2ACF70C96E7BC46
-:10F130009D58B67B2F62196BFE0C552E3F04BFE124
-:10F140000A189FC9B32AA7573FF0C8BAD0FC1923A1
-:10F150001ED884721A2D6F460E7CD397123D6F46CF
-:10F16000777B94BC19C1F7A3E7CD481BFDE3E5CD40
-:10F17000986BF961F266CCAD11F33ACC5B75F9BCD2
-:10F180001923E24A6E41F9E3F238D7125BDE0C9F95
-:10F1900055E2DFE553BA80DF45E982EB750F790769
-:10F1A0000E5A9F1E02FB89AE21575D36DF83562E15
-:10F1B000A2D39BE57798F323E7CBE889AE6AFFF704
-:10F1C0002B581E87B9966F992FA3877C0B07B3BF67
-:10F1D000403B196BBE8C9ED6879EE839E347CE979D
-:10F1E000D1935DEDC99EBE3985D1B9770F7456BFF5
-:10F1F00097AE34B51EC297ED2E546D997F0F9F3B8D
-:10F20000D38EF1998E9DFC5E9C8B38ECA9EC7B7DB6
-:10F21000F0373B9E4F184EF03B7E3B7151FEC4F3DE
-:10F22000E7D2CE7DFBE05EC05A1B71252681B34735
-:10F230001CFA81B00FBBC604F19AAADD9FBEF1474C
-:10F240000AD7DCA2C7FB721D148756F4FB5C89C089
-:10F25000B778F24BDCA7C319DDA55EA1DF756B7E25
-:10F260000F0774490D9E3F15E82DB86FEADACCEE12
-:10F27000B3EAC9D58F4F188DF7C689DF81FC433FAC
-:10F280007519C7B38B106700FAEFB4E2FDD525AF4F
-:10F290002D34C0A070DE1A1A37E85524C6811ACC66
-:10F2A000B6E1706F2F5DBDBFE773B5821FBE88C327
-:10F2B0004D2911E3449F2C283A0CFEF3227719DEE6
-:10F2C000AB482B15E346847F470FDB32F03365C232
-:10F2D000EF75FAD97DCFB0EFEA9BB7209E4BFD9A30
-:10F2E000FB4B8D625DA5DB392BBF9762219698E8B9
-:10F2F000D676C5E31392BF3DDD8CE922DDCC0E91BD
-:10F300006EF14344BA68E966758A74D1D22D61AC56
-:10F31000185F53E9A6DEA7FCA1E89664E3F73C82F8
-:10F32000F42A31A5A2C9473C33E400CAB7561FFAF4
-:10F330005802F01B7E48BF64FF6A7CCB6995C16EA2
-:10F34000A533D0445AC4DE8B077D80FCBDC489FA46
-:10F35000A0FE3E8A78F22197FB8FC8255AAE987E90
-:10F36000F0F802DABA19E46D04FB3D1A18AF4A222C
-:10F37000B89F5388D30EFBA826AFC9B94881734DF7
-:10F38000E25C940DE799762C1FE4DF3B770C25B8FF
-:10F39000EF6F0A7C9E0AF7061E1CD9390DE20F9EFC
-:10F3A000C5A404D6AF59096C7D5DC64B5B028BCFFB
-:10F3B0006C28D111D768F87D4A7ABF44C76BB7BBB8
-:10F3C0005EBB01FCD116763F80D83BDFB81DDB4722
-:10F3D000E1F7E119BAFA6B001FDA1FBF2BEE68F9EB
-:10F3E000C8B630C40EB7373F7225DC6BDDA48BFC8A
-:10F3F0003D73818DFFFE1D7E3F654430DF42816D90
-:10F400000CE6657870001DA77A7A17F25195CBEB60
-:10F4100038FD0F964D41FC5E68911C10AF2BD4DF78
-:10F4200071D3308ADFB8B7657EAF97DD5F1FCDFB44
-:10F43000D79AA9FEA2FDAAFF1BFC9E95974ECA98DB
-:10F440000F71744D19DE13FCA3ADF030F02BC7D54E
-:10F45000340AE429BF2511CF713D1F12277E9AD5AA
-:10F460002ADE07CCE1F7B673DA881F84E2DA63623A
-:10F47000FBB836B17E9D66FF39DFC6F5D4465241F2
-:10F48000EE367EAD9760FDE8E824CE3514DF8E457C
-:10F49000BD71FC8ECF09FA891D5FEB8B22DD8F5980
-:10F4A0006E63FCDB642068BF379559F0DEF9FEB26D
-:10F4B0008AFEE05F7C7197BB7FA43865889F96C009
-:10F4C000BEBB772590B120876B2546EFFA8C92085A
-:10F4D000EB962A77AA1CAAF2975116E78E740FF5BD
-:10F4E000339B8472965736443280FCEC9530FCD5C1
-:10F4F000BE86E2759975DB47D6F4017C3CCD9FE171
-:10F500007D32538BE48A744FE7619B8DDD6F5CE342
-:10F510005B0DF7467E419508EC5486A13E2B127C8C
-:10F520001FD9887EE95D36077BCFC4F320C9F51962
-:10F53000709FA2BD79D2E47514CF27A83EC07AB5DA
-:10F54000497122DEBE2A42F09E2C8FD7F59D46B629
-:10F550006C08F17F37DB721B6D145EA38D7D6FD954
-:10F56000CBED94006FE77FFDC306F03B2E1A917F31
-:10F57000BDB9BFA9BE7780D3675C826B2BBC4FE05F
-:10F58000979F51E3E374DB9C8B46415C9ED23BC466
-:10F590000E06F9E663F951DC04CF3F922C3A94430E
-:10F5A000E27239ECC27D761FEA8DAA07242011C8C9
-:10F5B00053A0DA37A9450A58A9DC8F365902708F53
-:10F5C0002EA99CCE3B19F29A9818BC56F99C18D7D4
-:10F5D000A2F29803CE3DC1ABF3104805F8AADD5363
-:10F5E000EDE5DA44668FD63E24635ED4CD729B1976
-:10F5F000E2A9592E471EA4884C921D78AFA65F3908
-:10F6000071520C49FCC05F2776FB0154C9AFF94623
-:10F610003F2FD2775B176DCCDF1E97E0FE33D06BA8
-:10F62000F8E1CEFDE02E38CDA417BBFFC5ED04F701
-:10F630006B0AF97A37EE3F74EC7BD1C00D24F43BB2
-:10F640002AAD9DD86466EBFCB8EBD9BA37EEBC05A1
-:10F65000D7BD6E3B515688EBD4C8965107E09EC586
-:10F66000C80F997E126E1FECF40FD029E7B04F0F30
-:10F67000F4F9B67641CB6F123075D787EAE01C8675
-:10F68000EA5BC8FB67357664C5F441B5185EE6727F
-:10F69000D4FF1EA7DE1D4247EDFBDD714AC9D4FD34
-:10F6A000DC3110ECC8113DDC0BE9C8A5F3A3F3DF96
-:10F6B000C8F525F173FF6498D7C6961BCD20DF6B84
-:10F6C0000379F662FA4EA2A9049997485C18CF19FB
-:10F6D000493D32C88F518B4241FD41A58424A4C0CD
-:10F6E0003DB42221DE432C493CFF4B00F9D22DA72B
-:10F6F000548E43EFE5AAF2A99547557E6BE1A0052C
-:10F70000CE0721624E4BBDD484878146B2D90EEB21
-:10F71000BBEA5FD6727FAED69CE9C7EF977C19E84B
-:10F720001FADE4FE51ADA5D084E6605F32AEEB2B99
-:10F73000217E42E9B03285D979753E5AB9F45CD45C
-:10F74000137FC83EC12377E27D44CF45033E5FA7C8
-:10F75000B807C0FC55FA5CC3E9A3A58794C0F79D20
-:10F760009C2E3DE39B63877BC1892617598FF8E662
-:10F77000E13DEEA6C04813ACBFF76AF08D01CF6B38
-:10F7800013C684E3295BA2E099CCF0BC8EB8FFD805
-:10F7900046E53767455D6D3CEA15792B3D275CAF43
-:10F7A000B47AA4EA8D1AE7BDB6B2FE005EBBED41A5
-:10F7B0006F3CF18C2E4EA504EF5739F7C4A31DD131
-:10F7C000EAD3E77CFE9E7846BF058A7B06CCCFA3B2
-:10F7D000EBCC043919EE20BD8A2992C39BF5A8E72A
-:10F7E000A435B67BF8AA7FA5FA55DA7EAA5FA5DA1A
-:10F7F00063F51EFCDA04F77C9003A999CA2DC5A70E
-:10F80000D6CEF64B9B6DEE4580573CC53D0EF68D32
-:10F81000430259ECFB5F512FA2E941BC46CE9B024B
-:10F8200032AE0B3EBA2E644BE178A8E30F4A48642F
-:10F830007CA45A0EEB7DDF1CC206AB269837A7EFDF
-:10F8400070E28675ABEF48769F714D02B3BFB50984
-:10F850006CDD52CBCDB692BB51BF65E2338EFCEE70
-:10F860007803AA70DF7C6D82EB2EA087A9C885F390
-:10F87000E863274EF04BFBC84D127C379A54E99051
-:10F88000D83D7312FC7E8BC2EB53ECC8057DED03B3
-:10F89000FB6BE8DF1239CFD8A309EAFD5EE67F3AB9
-:10F8A00049771EAF471398FF7908529FF42A56F301
-:10F8B00082A9E7394E09E8D46EBD0D916EBF2031A3
-:10F8C0003F3D91D14BBB4F00C287FEFEBD7B0D4437
-:10F8D000362791E0EF59D599D0BF8F27CE26B05764
-:10F8E000BB1206F0734C671DD47F25779A128706EA
-:10F8F000E55D95E30727CC70422A52DBF55DC361D5
-:10F900004F45E57A27D0BF7D42D760CC41493A3395
-:10F9100099FCB8F442BE20950FCD8AC00733ECC3E2
-:10F9200043EDA4D53004FCD17629CE09F72CDA9723
-:10F930004A0C5FC9C4F329C9C23CD3E3997FDDC136
-:10F94000EDD53B09592827AA3DA6F3AB83523B0FBF
-:10F950008F11EF7490CE3DF1FEAD706EA5C93FA939
-:10F96000CD4F3969A105EF7F6CDC63C6FD6B57098C
-:10F970003BC7EF6A31A27D8EA6B7696DE688711C20
-:10F98000B5A4F47B0BE897A6D424823D4C9B7BD294
-:10F99000067CD7D2A543F25D7308F645AF2B11BFA5
-:10F9A000BB55CBF4F49B1217D1FEE91993B1549FC8
-:10F9B0003758E488F7CD4F73BD52E5F14A3A22DF5C
-:10F9C0000F9D06793CEF7EF31D1709DEDF6F88631C
-:10F9D000746C886374EC728F4F781AE4CD9781FA57
-:10F9E000B0583D07E5FB7F35CF943ADE46AF29514D
-:10F9F000A62AD0B0608A19D68914E29A3C1B947565
-:10FA0000A342E03BA2C7BC3B12F3318E6D12EFF96B
-:10FA1000DAD9BDE1CF3716E077DEA9648D7930A55C
-:10FA2000475989CE09F183F30BDEB7E9A83C2DE8ED
-:10FA3000D39A03F2FBBAE226F63118EAC2FDC99264
-:10FA400052833F40F996DC400D05A5CB7F03F9D4E6
-:10FA500012800080000000001F8B080000000000E2
-:10FA6000000BB57D0B7854D5B5F03E73CE3C929922
-:10FA70002433794E1EC009E19D108724BC1F4E9E81
-:10FA8000448830BC0485EA8028CF2488D6DFB6DEDF
-:10FA9000CBC444F4A2B745E9AFF4D6DB7FB0A2A84B
-:10FAA000200182069AA41340E4113408A8A8AD519D
-:10FAB00029620BC908EAC5D67BFDD75A7B9FCCCCFF
-:10FAC0004922D8DE4E3EBFED3E8FBDD75EEFB5F684
-:10FAD000DA872EC977134B64CCB7D8C0B64A8C7D71
-:10FAE00087BF1B43ADD96E602C89B196383BB54EAC
-:10FAF000E70CC7D284F07E8563693E63D5D6D85CB7
-:10FB000016876D7F3F8B85F18A58EAD202685BAC1D
-:10FB1000AE5A95B12546AFDD0ECF774EBA3CA48ED6
-:10FB2000E12FD8DF3392B12E236B94E2B01F606CCB
-:10FB30000C4350F8CFED56EDD097F0FFE1FD448B2C
-:10FB40002D20C3B8CCA35CECB0F047BE1B281E4DE3
-:10FB500066CC285E939ADEF846CA652C76721163ED
-:10FB600070DFCA5C8FB22CB8318CA99E18C6A2D89F
-:10FB700033F6F3D98C19F07D584757F3BBFD7C0061
-:10FB8000C71FFEE54A0C83FB1F29C118570E6317D8
-:10FB90001E3C15E3B6C1F507E5723FF46F4740C65A
-:10FBA00087F0926F870BA3197BC4EE1981EBBA63C0
-:10FBB000DD7F8FF1DA42F7D903703195B1157E19E7
-:10FBC000E7E6F0C27FABB65919B384FA95F509118F
-:10FBD0007DC018E1B5D2CCD6D4DB7AD26305D2038E
-:10FBE000E65DB17D8B295DC5F9BD93ECD0BFA0C0AA
-:10FBF000AB80EF0B0D317E5F66089E25DB4799D207
-:10FC0000E1D6474D6616807530A5DDC86C84B50A0F
-:10FC100009F0E61578D3C379B8C54AE3DDF57F6509
-:10FC2000BF1996BA18E67A201E9E6F5A51C1727B90
-:10FC3000AEE3AE3FA8652940BCBBFE4D623E953F9A
-:10FC4000FF601E3CFFC0235F20DDF4EB5CEC337EE5
-:10FC5000D211B16E376300CF3241EF3B1F8DBCBF75
-:10FC6000ACE9311A6729F39A909E776DD4DFBFE92A
-:10FC700033E4BB654C095D073C5C3E9265453CDC6A
-:10FC8000618F493C0F20038F8DFD0EDEDF7D6460A8
-:10FC90009C37A7277EB5F6E23AE06F33637F5E6755
-:10FCA000A1F6C23A46ED08BB4AF459DD74F27EE48F
-:10FCB000AFAAC65D261CA7C5FFA78409F04861D37B
-:10FCC000373232572173DF7B0EF0F92326B3EF0072
-:10FCD0007FBB19E79FF546CF3D48AF1BAF96D37D5D
-:10FCE000FDFA1769FC7F249EF86711AE3B17AF2B16
-:10FCF0005FF6B6AE9FE2BA809FD95858977CFDEB6D
-:10FD0000D2D6A3AD4FBB5F2903DFF5F2BEC6EF230A
-:10FD1000843E58FADCACF569808ADAE6CFFA7710CF
-:10FD20003FB1D328BF1A3F2D1374D2F38D46C76E4F
-:10FD3000FE68FA775A9F463FE07FA7C1896DC06988
-:10FD400018D7934FF47CA1E7834E63477F945F3DC0
-:10FD50001F744A6C416FEBFA37FB405AD752D55D9E
-:10FD60006687FB7731CF7A3BAD67235DBFA06C3CE4
-:10FD7000FC3394ABE7385F77EB3933973776DCE8C1
-:10FD800047BDB936464D71D804FD80CE9DBBCC3EF3
-:10FD90007C4E9BE7FC3AB77B9011F15E4EED9FD70E
-:10FDA00079DC830687EEDFFDAB2BB12ABCDF358C17
-:10FDB00095A3DC77C644C2BBCF2E133CFB900EC884
-:10FDC0007F4AFBFF7C803AE9B9F631A847CF7FFB39
-:10FDD0005FB11E78BEEB5B73796FEB3C2DE807EAF1
-:10FDE000E5B413F8EC762167B73755125D963C33CE
-:10FDF000CB84FCCC1EE0F8B4C01FEAD7B6A8D86705
-:10FE0000711D8B1B24D2237A7ADCE59AFA39EADB5E
-:10FE10003BFD85F47E0FFAB0C789BE77213D86850C
-:10FE2000E831D6A1727854F803BEB943F0CD7965B4
-:10FE30008DC9007AE4FC33806F007995C2DCBDE99E
-:10FE4000C1FE0ECE877DAD47BF8EBEE05FF65CCDB6
-:10FE5000FA3486EB1F654AEB45EF68EBBF8BB9625E
-:10FE600049EF88F5B28E1B495EAB2D7C5E6D9D2BF4
-:10FE70009AEE9C817C51B519E895D973DDA8771766
-:10FE8000F7026F997CD16881F7BA1E905CA86FFB6E
-:10FE9000A283A627EE12F85AB96DF10C349A8B6141
-:10FEA0003E3913F5D1176FC624A25C415FFA1E7A62
-:10FEB00035C91F9B711D8CE37B09E07B8374FDF4C6
-:10FEC0005BB6B9D03D28ECB915FE9BDC83C2F59931
-:10FED0008EAE6CDBACD0F364B7DD26B4C7F10EA1F7
-:10FEE000BF845EEE5BBE60E100E7DA1D0EB26F6CB0
-:10FEF0008D83F46375D31653B8DDD5E44B93B7B156
-:10FF00000E3BF15955E313F41CE85FD501FD4A4B54
-:10FF1000C7CF6F55C3F0394ED051AE30A1FEEE4B76
-:10FF20007F82BEF9B2236C9D231CC2AE08FD7B2DDF
-:10FF3000FDA0C1AD1F57D3071ADC1ADF6BEBD1F35D
-:10FF40007D5FF0E9E9C2989FFB0B3AFAAC427A84F4
-:10FF5000F5115E05F0DBD66CF53F04F0B6491C7E6A
-:10FF60005F7314C1DFE92C769F033FAF2A7521B57B
-:10FF700027F0C554F4EB3CD3109F9A3FC70A1222D6
-:10FF8000FC247DABF93779C29FDA1BE5CE07130954
-:10FF90003F4F02F2C3949A8E391620D9AD8EEDE50B
-:10FFA0000A8C3FE5898E3951D05FE8D8C1FB5B3BB5
-:10FFB0004E595C8CD5B057CA4BA07F3BA013C7BB32
-:10FFC000565B60F62C44F95D0D7E9205ECD1EAD3C8
-:10FFD000430EA1DCAD6EAF2897C0EEAC0683238143
-:10FFE0003DAA74C706ACB9D46713E0B9E7EDDE6586
-:10FFF000C42F57EBC86EAD3EAD70B9399248EB5780
-:020000022000DC
-:1000000000F62878AF2E1AFC55C0575DBCC5559B2D
-:1000100049D77D51F1D877AB6AD8758D1EF81EC2CD
-:100020005167606E07B4AD4787C4757C8FDD6E5D28
-:10003000C72A14E08383EB2CD4EAEF179AEC83D021
-:10004000EE151A98B7377DF9A483FB8DC0E4E94813
-:10005000E7AA23269277FCA11F5829F451151028EE
-:100060000EE0A93CCD02D1B1F85CD9E70AB60D1279
-:10007000FB24C25F61A1BEDC37DCD7DB56E17883AD
-:10008000C3F984E3A948912A94B0794B6C51117D4E
-:1000900039C5300CD7C3E468D756C0AF9C6E58B38F
-:1000A0001BD62F0F8016F0A1D85DF2626837164F6D
-:1000B0009197405B6BE476B5D6C09687E3E90581FE
-:1000C0001FADFDC0E1D98A74BFF456FB182BE9AB14
-:1000D0000C3BC9B9586FADE40A50DCD4CA5C5BE193
-:1000E0005A9DEC619C8FEB19F2F11B621C97D9B001
-:1000F00047057E6D747C40FCEB8A33DC9B09FDC0B8
-:10010000131FF17EBAE14A26F0F781273ACA15900B
-:100110000757B6E1CA40E81F7AE2637E7F220C09E6
-:1001200006EAF0139F94FB6C382ED7676CBB3B1B21
-:10013000E7510C12C9A972C0E4AF85FFAD8BE5FC95
-:1001400054073C82FCF786B0B3EB6B8A5EB602FFC5
-:100150002B456E750D8CE3C78069F4DFDF6A7894F8
-:10016000AD068A53B0457CBF29D6ADD18135B8B331
-:1001700067A15EA87767CF8E41BC7A4F225EF3DB22
-:10018000DAA7A03E6E78FBFD31E8AF22BD709CFC83
-:100190003688DD603D975EEBB7450E8B473F7014A8
-:1001A000BEE3003996DCDC9F94543B5B047257EB52
-:1001B00066AA09D695A28BEB1A18D72FCFDB3D7F05
-:1001C000C4F7584680EC4DA1C3FB31CEAF8F5759D1
-:1001D0007B7CAF7A59AFB74CB90FC8E8E7C4A737F3
-:1001E000BEB704F5FBEFCDAEC12AC2E5660F003CF9
-:1001F0003B0D4C61F1C426C394028C3FA35D1B50A0
-:10020000EE5DCCE90339C3308D80845FE298B0B8ED
-:1002100055AC07DE2F61D08E45F86EA0F5C9C857E2
-:10022000A3984746FD3586F9ADD87635BFE644BC80
-:100230003D19C5EE40BFCFB28DB9FD61FA63403CB8
-:10024000F7F726251809EE6863FD6CE4D7E82F98C8
-:100250001DFDAAAEFF3429383E08C874BCEE3A6CC6
-:100260006008E70B46BF3D0EFAC1E18AFA2C0B8D00
-:10027000D725E8AD8DFBA4491DEE407D93C0FB2F33
-:100280001472FB1CFCDCE47F3613F16359E30F931B
-:100290002F673CF75BBD4945F1F1D0D63747339C1A
-:1002A0007F6C4BB401E9F0F2F6BC28E4879D881B13
-:1002B000587FBCD97E0F8E177F05E0CDA4EB6EC2B0
-:1002C000ABA28E8A03BC4E9866533700DE5F88AAC5
-:1002D0009F86FC1FDC6160CFC2143B4DAE59D8DF56
-:1002E0007959B5A3BE7D21B33E9AD6B3C340EBD9AD
-:1002F000191D1CB116E0DE304C2947F8142B535061
-:100300000F2B8622F51EB83E349EDB574D2F2F88CB
-:10031000E7F2F3A404F3E7E17385243FA5B28DE48B
-:10032000AE2BC8FC669827696EBB8CF4889E05AC22
-:10033000847CAF046406FD491E46498D4936A35F9F
-:10034000257DEBB62D06BA4F11FA76CA87AB2B780E
-:10035000DCE33A3D11C63B6833325CD764D621A357
-:100360003F38F92A7305907FAEF278C60E7FE83FDA
-:100370003DAFF3074BC578EEA0BD042F17B2483F41
-:10038000AE7473D9E712CDA32A68A78B2DBAFBE808
-:10039000E7C5621B193795C50BFFA63FEBFF1DE9AB
-:1003A00037E05E98EF3E3B9FAF54CEF915AEAFAB52
-:1003B000DCE4423CECB2B9DF9D887AB1DDC8B6B26C
-:1003C000BEE5E979883FFDE0730CBB6A65FE7CE21F
-:1003D000471BAE67C4E68DBE2858F788417C7CE495
-:1003E0003BD42343FF333101F5F855A15FB456E305
-:1003F00033E4277B1CE727FB0D2139BC333E939E5A
-:10040000D3E40AF90CC7D96FF42FF4F46227813FC3
-:10041000EF44FEDC656314473D966A598072A5CDB2
-:10042000F3BCE0637DBBBE666DAB11D7FD15D80391
-:1004300080BB24EDAA29DC9EEF49E27C552A7F4B44
-:10044000FE766793C4D0CF4F6EE2FA3B9C3F527B5F
-:10045000E78F5F225EAFC51F5ABCB0FB87F2C79122
-:10046000BF8F3F365C933FBE8D453CDCD75C9CC262
-:10047000BEC7BF6914FCD0D7FDF156AEE7F4D75F15
-:100480001178DD67DA383D17F5C0CD0617CA395047
-:100490003F7D36AC635F347F8F296BB2B0BF4BE1D9
-:1004A0007A65579399F4CA2E9BD74B76DC6961E83D
-:1004B0003F30C5DBF133D4876916754318FF2E8DA5
-:1004C000E7FC566F0C8CFF0CFDE2A39CCEE36ECED6
-:1004D000934DF05CEA522EE705174C5B300E2B4D26
-:1004E00028DC817C74027516B4D5E7E029407CD500
-:1004F0003913E9BBD75A4E96617E11FC1E37F2D9EB
-:10050000D8FD27CB8A72F079AE4FF78A56EB8FC7AA
-:1005100035C5B3EE78D723ECC678C6F59207F92433
-:1005200037D4676E23C56B1A3FD447033F805CCC3A
-:1005300067AA3116869C73CEF330984336A73C9257
-:10054000CEF303D3283E9C7BBAFD55D0CC6C9E479E
-:10055000775FF0C17C1D1F809D3D1E8FFED2F18014
-:10056000C980F399D664737F684D16F293264FF4D1
-:10057000033CD5FF61D8B31BC2EC7B6C0297A3C7C9
-:100580005D0ADDF77598FC83E1D2BF33FE5EBDB036
-:100590003F9FA33C63FC70DF2B0BD18EE62F771FB0
-:1005A00044FC4F4F92E9FA2F58C09285F47129E428
-:1005B00097D51BD5E2CFA4D0734CF10CB3C1FDFD90
-:1005C00049D1F9387F6982F722D28929C123F8DE1F
-:1005D000D80979F9285FB6517509688F34B801AE2A
-:1005E000F2ADB6101C1A5C67055F94262CBE88EB32
-:1005F000C7F750BF347E7CDE82EF6B74AF6FFE8234
-:10060000D33B8CFE48EF10FDA53BB0AFE1E12BA141
-:1006100057B4FE3F4A7F2D7F704DFA637E20F6EF80
-:10062000A2BF352129447FF0B3E2B1AFF7B3EA4D61
-:10063000E077E7F4BC5EE828A4E75D265821FA5588
-:100640002D1077A23C7A1DB42FB0C7CEE7EAFAC3CB
-:10065000F9FEE022B2C109F184F76A537008FA2169
-:10066000A30212F985A340F01791FF95417ACF2597
-:10067000F0C4CE4BD2F961DC45FF2E1DFDC3400214
-:10068000FA51A3CC1501E4F7DDD629E9E8D7E559FD
-:100690002765215FBD3AECBEE368825E4D5BBEE735
-:1006A0003935E4FF68FAEDA018569BBF2081EBA115
-:1006B0001B41DDA21F882E63381C9A3E47F2201C86
-:1006C0005260BEE13B2BE9E5A60EA0C78D0807E00E
-:1006D000A155620DA8CF0B0DEEC462F4D392020AAD
-:1006E000F7F7BEE98FF9C18AA637DE43782B703F52
-:1006F00004E35097F162773E62604F3F58F357B47E
-:10070000B840F367B4F813FD1EBC3F405CB79B01D3
-:1007100040B447018BBF06E67FF2B23ADC2DE456C7
-:100720008175548875CC64ED0417FBF6BBEF260188
-:100730007D66087C541C81B83117EF337633E0E1D5
-:100740006685C79337BB207E0CE3A399E322FBF8B1
-:100750009B921C1AE75ACFEBEDC044DDFECC3FDA8A
-:100760001E017BF409B8CEC7D6F1B874C240D9A730
-:10077000A0E11C9769407EAC16F60DC2E85EEDD292
-:100780004BC22F9E60E8C875017E5BF7FF8DECE0E1
-:1007900081FD7F7B07FDBCF19F2BCC0CEF4FF8BC9C
-:1007A000200EF5041BA7125F69E356FFA9C1CAF822
-:1007B00075E2FF2AB1F6C3008F7B28C267A1F677E6
-:1007C000179FDC84E37D794EE1BC2DE62F3379075A
-:1007D000611EBBCCC4F3018725EEFF68F70F1B0138
-:1007E0006EB8BE2941CB0BB493DDC79F398CCE3791
-:1007F000633E202F44D79B2F947FAEE4F6A40FFED8
-:10080000FE37F2015A1E60ABC01F3B78D6A4025CD3
-:10081000531BEE51D0BF9EEA94993B6CDE9B542B48
-:100820007387E5039E49D0F923075FDC3403EC4965
-:10083000759BEC8A42796DDA753C17FBEDB2CBDA29
-:100840000B1FE9F13BB5E91E05F9DF98A8927C5F23
-:100850006BFE0923804F6E40BA33F2EB3AC748244F
-:10086000477AFA1ED8FFEB848E9CBEF1DD17FDF5AA
-:1008700074F8DDC522DAEFB9163DF47CDB02EBF447
-:10088000C1FA02B04E1FF85D07D6D9A97F689D93C3
-:10089000FA1ABF5637FF3601FD368D4F4B1338DF3E
-:1008A0008CDFB72981D942F4D2F0F5A1B0577BA3F0
-:1008B000347FC3356F065C3A05768718D4C7DA9D56
-:1008C0006342F66BFEE932F23734FB355F5E544A21
-:1008D0006A53D82F4C23A35ED3DBA9B9EA6223EB7A
-:1008E000CD3E2D88EC97B76D5462A867203A4992A7
-:1008F000C087F0B33538CE300FC1A9A7A706971E21
-:100900001E6D7D9A7F3D5FD06FCEA04C23C2DFC3AA
-:10091000AE8A75E2409887B85EBBFAB58E9FAF5C31
-:1009200028792BB717BEED8B7FF5F7357D508613F1
-:10093000E451EB43BFC298984C742BBB6A626EB013
-:100940001B2C238A7D1A665758C550E29F7B851D54
-:10095000EE8B7FAAAECACC9B1FE22363E31356E45F
-:10096000A37DCA462BE62727DB66D5C6019E4AFE35
-:10097000543417FDBCEA0E03C3145669D31707316C
-:10098000AEAF7E8FB9502F1635B51623DF1D52DA64
-:10099000658AB3BF64EC89307FB1B1A9D68AFE54B1
-:1009A00063A24C71FC6107E74BEDFE9644AE3F1A23
-:1009B000CF5D9EE1EEE5FE1971BFE4E33CE2A3B238
-:1009C0004741AE310E4D8AA1BC4489649F53817E5C
-:1009D000C84D46F2F3218EF923EE035E6A34EFC26E
-:1009E000D47E69E323F7D88110F5FFFD698D19F3F3
-:1009F0000BB324D7B3F05C991A6CC57ED9DC4CAA32
-:100A00007B18FB3F32F9B3C15B25CA8B9401BB60F5
-:100A1000BF6C51A61FF313FB25DEF735F37D02668D
-:100A2000F725CC8079DEAE4818B581784AEB0FCE39
-:100A3000DBC0042387C557F7ED9549CFDC572AF96A
-:100A400071BFA9D49ECE7C617C55F6A889D635BBF2
-:100A500029A508F9784EB9CCFC61FC1D107EE13C5B
-:100A60000FC4E161EF1D8EE270051703DC52486E82
-:100A7000A7093E9FC5B89F387F4142C47BF0C62D71
-:100A8000688F6E6D8238157AD344FC7AAB373D623D
-:100A90005E0FE37ECD09162C8983F1FB250D24FE24
-:100AA0009B11B48F0EA8A877CE24A25E63C3B89C16
-:100AB0006872572AAFAE237E70F27DB279124893E6
-:100AC0008CFA2F529E668E8BECCF72F7A8378890E7
-:100AD0007FBD5ED7E47E5EB34CFB72F30A2517EB55
-:100AE000453FE8FDECB1D17DE8856FD587E37AD34A
-:100AF0000B1F96FF5D7AE135082BC681FCFE345151
-:100B0000E8877EAC1FEA875279FB26E4972EB07700
-:100B1000E65EF845B3175A3C5E06F24AF27E91EF64
-:100B200067945E4D65BEFC503CDEAD2FC09F70F5F6
-:100B3000E2E73C9D984572D4AD5F34FD11E64F1855
-:100B4000C7FCE3FE4429F891A63C842F83E02B6385
-:100B50003C1F588685439897737E41F9966A88F3BF
-:100B600029DE67BF25B850CF49F12139D0FB195A8A
-:100B70005ED72AF2087ABEE8CEF3CD35521D8CC678
-:100B80001765762E1F657365CABBEBF9449B4FCF83
-:100B90001F015D5EE69AFC21E4EC87F24773A2D860
-:100BA000571DC4065D0F5F68FCA0F187DE8E1CD365
-:100BB000E567FAB2236FA21D19DDB71D797D989103
-:100BC000F4B5DE7E68F6E277495C2F6724F27D8E0D
-:100BD00069C3E7D9D0EFB026F13A0DCD0E75E7978E
-:100BE00036737E78BD638922A13D41BD9019867F11
-:100BF000916FD5F8AFEA5189F28D15422F7536F312
-:100C0000FC5B7589ECB7C0FF16373DB189F78D9451
-:100C10009F2B545A150B8C3BD325B930AFE316F9F3
-:100C2000BA196E89E7EB5C91FBF42D3AFACE117C90
-:100C3000349305EBD01FD7EBA53957B95FA0D74F39
-:100C400073C4BEFB1CDDBEFB554DDE07B001FF4C7F
-:100C50007FC09CF4FDFE80F6BE46478D7E2AEEC521
-:100C6000A11C1DFCC6A4C670FF19E937F5AA42E312
-:100C7000D893045F0A7FE6CB8B79BFA0984F3C5F87
-:100C8000DDF485C93BB26FF8AFE5B7C6A29F3E3A27
-:100C9000E4B76BF34E53184B47C74C674F6689EB6D
-:100CA0003FD47E0CD7AD43A383A6477BE059E8D958
-:100CB000BEE8742D3DABE9B37FB69ED5C6D7EC80B8
-:100CC00036AF5EFFF615B769FA74FD1603E54B26DD
-:100CD0008BF878B2C8C3CE4FE2F1C1AD493CEEEC1F
-:100CE000FACA62407BB9B385FB272EB3FD38FA05FB
-:100CF000A17C1FA7E7C331CC87FBEC4C69B7D0BE02
-:100D000067119012F73DD3F8BEE77625E0213DED5F
-:100D100052580DC8C9397C0FE679F8806F21EAE98D
-:100D2000873F1962A0FD7725D08EFEC9D83C85F695
-:100D30008F1C6695F2C19DCD663BBED7B5EFFFB463
-:100D40001A719CAF980B43B843CDE6EEFD1BD40758
-:100D5000A5729B8CF9FBAE20C8083C3F6941A018E6
-:100D6000E3A0C9ACBD16E57B02D2B117FAFD2A4952
-:100D70008BB37BCFEF1737733FAE3846263F6E8A73
-:100D8000AFBD18F7ADA62892AB169FD5E5F75FD19A
-:100D9000C51FA1FCBEAAF0FA435DFEBE91EB99EB24
-:100DA000CDEB4F40DD067CBC5EE373A16F581FF9AD
-:100DB000FD9D26BEEF133C6964E807B30B89BDE6D1
-:100DC00063AE95E7DFD712ED5663719F8EFBEBFBA9
-:100DD0005AD2DC6A6EDFCFE776048BD03CEEDC3E85
-:100DE0005BA1FA35911FEDB17FD2C7FE88BBD17EE2
-:100DF00008D5695FFB21C55FAA94F6B95EBC697529
-:100E00000B4CD43FDDC8B49F9BE474E7F96837F21C
-:100E1000F9CEF3696E84EB79C1A71ADFEF3B77391E
-:100E20009AF6414D6E15F78F830E8BEB59E25BCE30
-:100E3000EFF5A943FCB84FFB1B21173BA383C7B2B7
-:100E400013C3F73DF83E47CBBA47679F33D27EB90D
-:100E500084F9486D7FD9077243753DF18CE20F2309
-:100E6000AB67386FAD9BFD1ADB2993D438C4FBE523
-:100E7000446D1F538DA33CC4B757A8CE508FFFDDE0
-:100E8000EB9807EB511AD6593C0AC8FFABEBECD4F0
-:100E90006F5CE7A476FF3A95DA878EC73E8076BF0F
-:100EA000DA6DF22861FAE39D64EE77E5657F524CD6
-:100EB000C5DF7F6354873EE5C10E19F5C58D5761C7
-:100EC0001D117527CA65C437E537B342FD4C6971FA
-:100ED0000CF66FBC0AFDB0E7AF2439B83DAA53EA5F
-:100EE000462793B4105FFC2DC9DD9104D7EF7178CC
-:100EF0003EC176B734FFE02546FD73BC7FAB7C096D
-:100F00009ECB0F14525E391FF3CA7934EC42C4DF12
-:100F1000E85613ED976BF9DD3C4DFEBE8ECC33E702
-:100F20008BBCEEABAC83F2CD051608B40C0817A74A
-:100F30009F5B9AE794301F98647261BDC3E82C4FA1
-:100F40003EE6635B9318C547ADADC9196A0E720FD3
-:100F5000CFFBBAB5BC2FFBFEBCEF918F627DA4B76F
-:100F6000AE9A687FFAC8A9585780F60B2DE4FF693E
-:100F7000F5C82DD1BCCE80652CA03CD38DA29ED1CE
-:100F800062F69A93495F050E9E80F77E7F99F17D08
-:100F9000C7F60F695FBBD8303C05EB7E0F4A43E3D1
-:100FA000B07DEAA3D81C6A4FC55E44FCB418AC2AD5
-:100FB000CE7B669D5A82756D27D6B112AC637B6B72
-:100FC0009D85DA93EBECD49E5AE7A4F675B88EFCB7
-:100FD000731C9E477E71BF65A37D92296FD9146CE7
-:100FE000F316C650BBFBB61813C2DB12CBB66BF3BD
-:100FF00060BD5A203AD080C9FED6A7BC8F59FA816D
-:10100000DD337B474AA3186B7BCA3B5D990CE34EEB
-:10101000EDFF93AFE0FE9BC9CB1EB3005C734FD9CD
-:101020001ADAA0FF76F2F2C76CA86F8F4783D2C39B
-:10103000F5AE38EE1E047443A590C605978D837EE9
-:1010400082D65F31BD641263B71477643360ADEC50
-:10105000E495D32D80C75BACDE1F63DFE44B9A5E63
-:10106000D20FFBCC87F56041C948713FCB9012B1DC
-:10107000FE65A6C3FB467258FD9E5BFA13ED338DE9
-:10108000714BCC41871F8CB4EFC5EC1F2784CBDBA1
-:101090004C47E91B488F89C9BC0E78F424C91D5EF2
-:1010A0005FA17F6EF439B504E934E642591DB633C9
-:1010B000CB1DD4F72C185B87F25C62EBEBFD627AF8
-:1010C000BF3C99D78D142952445D89FEB97C6026B6
-:1010D000F48F8347A3294F30FAB4B716EB4F4B9DDB
-:1010E0009979B2A6FAA8EFD882FB6DA32BCE9424EF
-:1010F000A0FCD824179A8931ACA32E01EE17DAB1DF
-:10110000A00AD7F54431D6FF8C562517A2ADD0DD05
-:10111000DA80EF17BA625C85E88F9F564BD0F49C5B
-:1011200052469D2880E7A60E925D1618E854E0A668
-:101130008997A05F382C8EF2BC85CA9A2B27A81FEE
-:10114000E3AA51711D5B7E5D45E398C9AEEF9E51E8
-:10115000FC2FC83F459E38CA09023E4AC2EBCA600E
-:10116000DD0477A15DF64749C8DFFF5A6287FEEECE
-:10117000FE1296CBC37CC3FF42F78F44AB5100E80D
-:101180006E93BD04C7DB6D92EC0F51DF538CCFFB28
-:10119000861855CC1F952546458C3FB5441A7F0EC1
-:1011A000E1CF891B85D7CA331C11F7DB6EB3929D43
-:1011B000A8782B87FCA2B6DBD2C95E54BC35A9083F
-:1011C000DB3603F7D32BDEAA28A7FB061E07572C16
-:1011D000FC915BF429EEAD585849FD5629E52738B6
-:1011E000DF959CB83CCCAF4D1B945AA244F88103C8
-:1011F00049FEF3447EAFD0307CD32480FFDEA37C55
-:101200009FA2222733E2F91905524978FDA86752B7
-:1012100054447F7689A324BC0E756E456A44FF96BC
-:10122000B99911FD92A30564BF410F5494801E38F3
-:101230000AED5260C1025107A5E59F0A054B15B69C
-:101240008BBCACC2E3EB61F0877AB0C41669A777B8
-:1012500047733B5FCED6D00649F911BEBF5D966895
-:10126000FC24DC4E94CB15365E97158987BCA346CB
-:10127000B2977931921FE3FA92A34BEBD0F49667C1
-:1012800044BEAFF961E5023E6D5EE673B7A33FA2CF
-:10129000C1ADCDAFC15F2E2F2AA17CF735D6A18776
-:1012A00097C17A503FE8E1684A16FE1AF81FE4AF8A
-:1012B000897324F04BECCD7E6BFE7A05E82B47B8A2
-:1012C000BEB2498958B7D797BED2C6EDCB2FD3C689
-:1012D0009DE9F0D0FBEE1D9F9E9A2087F5333F4E8F
-:1012E000880FEFBFF8E9A688FB491FCF7184F7B7D5
-:1012F0007E3A07EF4F51D45A1BF0E53126B97CC82E
-:10130000076DAA1203F4283EEDAEC3B6F4432F9640
-:10131000ABB2A9E77C75D84EBCE86F33C3BA6E1A7E
-:1013200026AB18BF6B7E881EDEBF26F3BCC3B1ABF5
-:10133000AA15F75977FB542BFAF3BB1F54ADE88776
-:10134000EC76F37319EE2C039D8F7167F37AC5BFAA
-:1013500024F3BA834EF1BED6FA8DDE4E841BEBCC5D
-:10136000D137A8FA264875E5C7D0BFCAE9E95F1D9D
-:1013700053FC369CEFD8837E5BF87EE2F5FA577F0C
-:10138000041E43380A99E409D723C596284FB8DCD0
-:1013900096DA1D11FD93C20F99EA4C8D78EF263530
-:1013A00033E239F01B87A15F526B62546FEB33F06D
-:1013B0007A5B3D1E57A4F0F8CE65B3A33B83FB6672
-:1013C000726FE7915CC5865ECFB7A5A4707FF03FD2
-:1013D0005218C1352B85C3A7AFAFD5F76BF17C0F82
-:1013E000E293B99CC8E72EABE10AB8BCACE0E927B0
-:1013F000A6535D6DBEE1DE2CE8573CBD753AAFAB40
-:1014000035ECC13ADB194F3FCFEFDF60C837823F81
-:10141000B0CDF7C274AC2BAF8AE2F5095551A23EAC
-:10142000B46E7444DCA3183E7E6A21C69FFB8D0C0B
-:10143000F3FC8F99C00EE685F6D9AD661EAF5A4D06
-:10144000BC0E7C7DE6A9F5A83F3E8BF2E6A5509E3A
-:10145000B148453C5EB45BA83EF4BE7DA529C807F3
-:10146000B35278DE2B7BCF44279D2FFBE7C151FC85
-:101470007D7060FD308E73717736F9E5D903189D64
-:1014800027D1E801E1335D8F82F081CE6330B7135D
-:10149000F36FB50E138D332B85F3E3F5B63DEA8973
-:1014A000E30C6B7641BB2085C7CDB7E2BC046FB0BF
-:1014B000FF2CDCD0B307FBCF1EC9FB486F59CE0B06
-:1014C000A27F1BFC510CEDC3BC1FCDF1C63282B410
-:1014D0006FF3EEA26CD706BACEF1B8C03FB0B643F8
-:1014E000C5FA0F7F3FACB718E8F42E457CDC66F6F2
-:1014F0000F26BEB2AD89C179AEB7DEB8EFF921E0F3
-:10150000047B327F3CA797363FE0D882747C579C9F
-:101510003BD1E001387E8C70687075C3A3AB3FEFA0
-:10152000147E7B278E971BCA5357FFC940798A6A5E
-:1015300009F424F4F77CC85C3E95E8437950DCD28A
-:10154000C2F9C69F58526C83B6A071158F8FDB9578
-:1015500088BC9866CF268AE7C7BEA744D8A389224D
-:10156000FE1DAFCB4F4E6C9C4EE7F826EAE2E25FE1
-:10157000A488BC651A4B0BCF23AC15F1C6E5B68128
-:1015800071E89F2A10E7CA806F932AB371F121BDD9
-:10159000D0B08E459C53D4F870E469FB9D38DFC809
-:1015A000D3EC0EF207B471BBF3131C2F97DFE37873
-:1015B00019D531ECE949D0371E3132BF1A5AE70448
-:1015C0000E2A833087E2A4CB176C645FC61C9D4350
-:1015D000F5DE66A781A961EB8F52A3991AA62FADFC
-:1015E000C3E223FAB2A04F5D54A41F902FE6897185
-:1015F000A5458CB73FBEEC08FA05F9B6E5E417C47B
-:101600008D1B18311E6B5322FC833CE67163DCE8B2
-:1016100002FAE27ED998D34A841F302EB091CEA12F
-:101620008EFB30F2FA847391FD037DD1A52FFCB1BE
-:10163000DCA7D12FFCA1F873B823F197501E89BF06
-:10164000244F24FE521644E227D51B898FF4E5234C
-:1016500022EEF75B9317D11FF0C08488E733C18077
-:1016600085F7B31E9D16F1FCE08DB323FA4337DFF7
-:1016700016F1FC70FF9288FBD9DB56FE207A8FAC06
-:101680005F1BF1BC9EDE3734FE34627C8DDE3EF89B
-:10169000FBDFA437730AFF50D03B51D859879BD743
-:1016A000AD75196D8FE2797C3C3682FACE81E7E91F
-:1016B00063D1FEAB5497E79BC6685FFB97B2474286
-:1016C000BD940EA8356451BD3CD5F5FDDC6088D8CD
-:1016D00067B73BB93F6477723DFE6B133F2F950EA2
-:1016E000FE26D929030BC5D916AC77648299AC8F35
-:1016F000639C5DE7E818A63A306F07FDC921BDAAD3
-:10170000E9D1DBCC6A6D07E8975132D793A03FFB54
-:1017100039619EF7A5078DDCFFF019D1FF48B7307E
-:101720005F6C1ED919CA433B58A284E700E2427A93
-:101730005CFD0E88757065369DC37A134140BF59B4
-:1017400075D17ED3AD9A9E5A3E9CF4D4655BA4FFBE
-:10175000767969165D3F7BBB99EA07CE8A3A470DD9
-:101760000FFAF3D6DA396CEDFEF22D9B62D0EF3C26
-:101770002BCEFF6AD7270BFC4D76CAC2FE59D66026
-:101780003E6C1118F138C07BE5918ED8DB18F99BBF
-:101790009370DD555BAEDCFE2AF4AB0DC1646E3791
-:1017A0007CF4DEFC77F9B9EEF97F8BFCAE408593D3
-:1017B000C7F91562FC5BA0B1039E6E013A38B07D9B
-:1017C000635219F2275CA7F371338F3023CAF32CCD
-:1017D0006F26D54D9C62AE337B01C4F94E95E09CDB
-:1017E000CB3C46CC5BBD737B650C3ED73D9E360E35
-:1017F000300CFA25EF3A7CC664CC1B4CE6751330EE
-:101800009F05AF7B16A53F8C76499BEF1DE6BD7407
-:1018100006E83B9BB9685C6D7C86E9F9303DB57B99
-:10182000F9AA8F1260BEB5470D948F58DB6CA6786D
-:10183000AD6BE57FED780AEEDF91DED10FEDF6FBC3
-:101840002BFF3604F9E1D6CD325381DEAADD7BA72A
-:10185000336C5FE5ECD22B31781FECEED6A7D05875
-:10186000BE6CA63AE2F757BE3C24DC8FAD74162E50
-:10187000C7F7D8B8EB3BEF58FCD2F014AAF712FC2C
-:10188000B442F0D3DA178792BFB536A69B9F787F14
-:101890002BAF1BD1D67146F0E3CA97BE89F8CEC4F0
-:1018A0006EE023D5CCF7C5D4A160EFDB2EE7D2776D
-:1018B0001F8CDE7F75C2BC2D573F89C5FE9E37FF4A
-:1018C0004AF0B3B9D7072FCAA26F4C687F5A3BEFD3
-:1018D000B9A029211FE90E72B601C7BFED772F5EAF
-:1018E000FA00F1D3FCF2D69FE133D779FE739796D5
-:1018F0007714F6C625F001F686E28B2E16CDCF932F
-:1019000008FF46C11DF92CFA9E874A7CED66C77117
-:101910001FA7B6D5407526B1B8091496AF8B950DA3
-:101920009A51725B9CA0AF859EF97FCEDB2AEAA814
-:101930003E20D21F2A38B432C20FF2C05FAF7ED031
-:1019400033DE5ACC2FE9FDA1F101C36253DCF7F875
-:101950004587A6F5EA174140ED96C688AD21F835D2
-:10196000E8F4F37E2157F53816E6FF03D1FCFC338B
-:10197000980EF47B7F9ACAF5B72D83F1F36952E78D
-:10198000300BE8CB16E7A2C71F856B96417CDDD8EC
-:10199000AFA53335F9C47FDD7ED7A111A4B7D8B781
-:1019A000301BE243E43DF4742BC0F3ECF961722781
-:1019B000DE0F1CFE6B2CE67D77C4AB6F213D8247AA
-:1019C00065DAFF89523A4C8E5EE2BB57510F029F97
-:1019D000CAA9DC1E581A797ED1A2BA19C60F51764F
-:1019E000FBA8F0737F8D4E1E4F561E7EBFBF09E8C9
-:1019F00071C9D0169B03E3AFDEBB3B16DDFF0C9332
-:101A0000F703E4C35567DF1E63A7FCCD96FE180FEE
-:101A1000D607F87730462ACCA7E4F584A37A332C8E
-:101A20002601CFE927503BB2297F19F2597580AFC3
-:101A300013C7C642BEE18D12F53B1B6BE371BCEAD6
-:101A4000DF37A7A13CBD9CC4E3CD97AE66F3F71585
-:101A5000A6E0F341A74310D36FC0F8E46511D77433
-:101A60005E95E9396DFE918D85B21DF82127B0F1A3
-:101A700000C5514D6615E91AF51CE378688A22B94C
-:101A8000AF6E99CAD0EE7739984B82FB3BA2837F29
-:101A9000A4F36ECD6615F3AD51F68D2C1EC6DF2175
-:101AA000F659870347E17929EDBA365F54D3D31845
-:101AB00073203F50DE374AD9C826DBC2F11C437879
-:101AC00076A4723EDA111D30609E253898B1670900
-:101AD000AE109C8CE6D5E01CEEC7F3843B4CC1F302
-:101AE000786E06E0B223FD87330E276B1AAA629E3A
-:101AF00020CAEEA67544D955974FEA0957752EF3BB
-:101B0000A35DFFF943AC5B6E518EABA3437D0BC865
-:101B1000C08E814CC8F9CF1F2FC908EF83621917F7
-:101B20007A7FC8AF363E5E3789E2099F8CF12FB4C9
-:101B300031F1B84E95D6A7608A298FE301F7DBAD66
-:101B4000167EBFFB79E06F1BF66DFC39579CDD3AC2
-:101B50004D2239E1F5B8421FDC2705CEDF08A4FD90
-:101B60002A702057055856BFB19FF87495A1E9A96E
-:101B70009170FFEE28AF2B15E67BED43039D6BFDC7
-:101B8000F38B51FE0AC0C7B07D5B92DDBDC8877E76
-:101B9000FC47DE7BE8C974A4FF3E49C53C6C973125
-:101BA00048DF37A96AFACC44F50D8D1F53DDD39B6E
-:101BB000A9DE4938CFB8C61ADA8F1ECF36D27E7466
-:101BC000B6380F5EEFE4FAE3F2E921CFD684E17F85
-:101BD000492A972F16F40E40B96912F2D9827E0A6B
-:101BE000B47B85BFB4B7F5D62C352C7F58C30EA473
-:101BF00023BE1F6287A8D5AE77F9F9B9CAEC772C56
-:101C000077B8C3F86F9190F745A9224F96EA9D8D5A
-:101C1000F0AE6AFDC414ABE23999FAFE6857EAC126
-:101C20009FB2F782976EB9D5C951B51234E1F3D599
-:101C300017F8F957A0731D9E3778F99DC6118BE1EF
-:101C4000FA5EC035D695FACE9AA9BE72AFD1938E00
-:101C5000CFD79CF93A17F556090201F07CDDBC6A32
-:101C600000E20DF8BE281AE56B17233DA6C9670EE2
-:101C7000CA27BC9F837C5F80FDE1A4877798DAF94F
-:101C8000F9D3BDFCFC29F03DC901F0BD1DFD861C4A
-:101C90003BC801BD3F94E47B47BB81CEC9FA408F6E
-:101CA0000FA67ED11CECEF682FB1937C635E3F0FD3
-:101CB000E5347080C6A987D8044927314FB83FD989
-:101CC000E88C25BA69FAF1B093093BA1C6E1790322
-:101CD000AB2C47C845983DE47D612F4FFC2AF0F8B6
-:101CE0002FD176B8855D10FE14F3E6939EBF57D8CA
-:101CF000AAB5AF4F98B91DD6B9F684DC5D3F8EFE0C
-:101D00006B40F0C901E1CFA29D5013783D0E5E1FDC
-:101D1000BD99D7D58E71AF29C6B3CFE3CA371EC4DC
-:101D20007682A7BE18CF3E4F5AD07E909F81E6E7BD
-:101D3000D91B0EDC948DFBDE5D67CD0CF75D1AFEC2
-:101D40001AFCE34B8087FB5B00FFBDD825580EF1E2
-:101D50001F58EC74E6EC79BF4BD2F4C7A90AE4C76C
-:101D6000CE0639D40740AA80C1B1FFDBD4938FFBE4
-:101D7000A09F95E67E3E15FDED742FB55D27FF9A79
-:101D80008CB660EF69EE473598DCD9C83F0D032368
-:101D9000BF1FA0B54FA61A890E057D7CBFEB482A50
-:101DA000CF6F0EF1B1C7908FAA1A64BB1FE87EA94E
-:101DB00041769BC01F3AEFF626E3D99C0BCC77CB3C
-:101DC00044B4F3228ED4BEF77217FA2960A7EEFE50
-:101DD00065EFFB0FAB99F65B6340BE5AD624B1FFAB
-:101DE000001C2C7F26F2F9D5DAF76A1AB71CC6EF69
-:101DF00088AD7C4E771FFD15FA0E46A41F7324553F
-:101E0000F827592C0BFD13E023D20F46851D310313
-:101E1000DFAE48F7EE437BFCB2F8BE02E85192C752
-:101E20007D4E615744FD417007AF2B1EBECD2F1B69
-:101E3000E0FD098A5F467BC5A0C57D87716E6F197D
-:101E40007D87C9E73E8DFB3ECB853E5CAEF9697E62
-:101E5000BE3F026637C24FAB16AB1FCFFCB5B1B861
-:101E6000FE6D12C5CBABB645EEA7548BF5AFDE7C4D
-:101E7000F2309ABCCA7ADD7DB1FE6ADDFAB57DF337
-:101E8000CF5323EBBFAE773FE42F46EE37BC2DC6D2
-:101E9000D1EE9BD2B87EAC826520DD56FB65BF9F3C
-:101EA000FB7936FC5ED09D625D770AFAD33AE1B9E0
-:101EB000CA6D923F803CFE78649DE95DF58BCB90C6
-:101EC000AE7A3E5929D6BD7CBB91FC55FCFE0FCAAB
-:101ED0009D9E3F568AF5AFD4ADBFCA2BE9E0E37EA5
-:101EE000744FF8EA6F413A576E37B2DEE0D3E8B587
-:101EF00052E3EB3EE0D5E0D4E0FEA1F0F64F13F95B
-:101F0000AD116C04D1A93CE1BAE8A4F773771D1EAA
-:101F100041DF5BBB7C6420C5FB1A1FE8DF2F137E0B
-:101F2000F2D4CDDC6FBCD4586C1D89F14C9BC1251B
-:101F3000A9149FC58E04BCE437CBAC02FA5D4D59A1
-:101F40009BF0FB8379270AE660FC9F7FC240E7EFA6
-:101F5000F61C29A07DE7FCA38312B228CFEDA2EFE7
-:101F6000E3C038645FBBDAF236E1F984AEB69202C0
-:101F70001C5782E7D00FC81376A2A62DCF1A7EFE7B
-:101F80007C4C1A8FEFD73B3FFD39FAE9537719E9BB
-:101F90009CC55463F04DACDBDA7344A17DF2D527C8
-:101FA000963C1485F47D51A27DF2C3ED6B1317228C
-:101FB0009F3519EDB8EFDDD5F4E30378DFB75DA207
-:101FC000EF5E54379766EF807EDE967C57F8F9B364
-:101FD0003C874AF0B1542BC5CF53FB19C96E5E4CF8
-:101FE000B3FE16FD9F95EE2D24DF17F7EF3151DD7F
-:101FF000DE0E89A1293BEC3CF80AE2E3E2AB274D77
-:10200000E88417379C34757C8F3F70C92FB300C5A7
-:10201000CD1B4D18C7546ED1FA1D26A49347F8471F
-:1020200055CF7D4CFD95E8CFC37C2B9F91A97EF7C2
-:1020300060F36B26E4E7AAED124BC90CBBBF598ACB
-:10204000F85EC312C6F96089D03FAB987F7D1A3C19
-:10205000B76A23AF5B608F46D6016BFCBD42F0F7D9
-:10206000AAEDB3E8FB533DBE5B8871E30DF81CE7B6
-:10207000EF659B23EFAF107CBD42C7D73F4913FAF2
-:1020800067381B8E7CFD75A11A9703D7BF3EB972C6
-:10209000406FE7ECDB84BDD6ECE5E58081EC8DFE9E
-:1020A000B9CEC62B046775DB6513FAA7654D5F10C3
-:1020B000FE2B9A5AA97EE466E65D8DF8BAB9C96A24
-:1020C00047B9AEE8E07A685A93D9EF97F07E3DD5EC
-:1020D0003977B5F0BA49DF7E89FC1C4D8F69DF770F
-:1020E0005C26F0B80C14787A1EFABB3C6EAE127106
-:1020F000F28A615B0EE33E7B95B8BFFAE8C158F403
-:102100000FA7B12F6E47FAC07C0CE763CF44E27D86
-:10211000BAD08BD3B773BDA8B76B5DA9D933298F5C
-:1021200009712AC2B57A7B24BEAB74F1F963693CAC
-:102130003FF6820EDF154166CD413854D9E5A7A799
-:10214000DB159CF7482ED85BB4936AD6F77E87F1EF
-:102150004DE1676BFD99E21C78BD7DA32D3C6E8E31
-:102160004AE7FEC2CAF1B20FE9D51D6F0C3A98AB2F
-:102170001A42F106C419CD69493CEEC08292373249
-:10218000649698188A371E716EAAC8837EF5762EDB
-:10219000F79DE3603C3C7FAD30F247ABB79BE99CD9
-:1021A0006235D09FE28A267E9EC2D3249522DDC16D
-:1021B0005F3F9A86FBB198528575CF6AE47C3FAB4E
-:1021C000E40BE297A383F87A2F2B6A4A6FFEBBE6F3
-:1021D000B7E3F93035CC7FAF0239C5E7AB9A783D2C
-:1021E00052C3816FFA67A29E6BFEAFFE8BA1FD5AB0
-:1021F000D845CD2F0C825F3890FB45F4BDC9BB8517
-:102200007C2DB3F37DBABB85FD61521DF17995B18B
-:10221000FE503CFA593B78BD00DB871F8503FDF873
-:10222000F64B75F1B0EECE9724AA87C3F7F17B94F5
-:102230009D4BEA3F41BFFBEB1D16F237EF06BF6532
-:102240004A5E4FB9D4E45BFB6E560D7B88FCCF87AA
-:10225000581DB595829F3B1B6BE9FBA09ABF42EFCF
-:102260000FECE98F540ABEAFD4F15F547A24DFD566
-:10227000BC1D4D7E63D751D98EFB3180AFDFA48565
-:10228000E345F8210D07A288AE5D276D6447FE2C5B
-:10229000F8EDA2C83FD78C93090F86F1BCCD6E79BB
-:1022A0006D20D211F18EF5F72FB7BC36829FFBF669
-:1022B00013FE576D9323BE0F5B591FF9FDD79AB7D5
-:1022C0006FA3EF0855EFEF866B88293104575F72D3
-:1022D00020493C8E3448917164F53ED9135E7706EF
-:1022E000EBB903F551BA9007A6049331FF35009D71
-:1022F0000680AFA689D3D5D0CC5B98FF169E273138
-:10230000D2FC3DEE17F956E3FDAF33AD7CFFFAAAE0
-:10231000AF02FBF70F94A9AEF3FEB7570E0DD7A38C
-:102320000CE104BA561B83C9146F9E34107CD52768
-:102330002F270FB2A15EDA5282DF0F9D2EF4DFE16C
-:1023400081D6E5C8CF3E9C372534CECB69BC7E8F85
-:10235000E17A9DE86DFC928F2BD6FB109B2DE26AF3
-:10236000CE4F39697CBD108F8C4BEF251EB95EBFF7
-:1023700013ECC3A98512D633293E8C87F7BCC7F569
-:10238000424DF3B28F90DFABDF37539DD7FD2DCB9E
-:102390008652BDAFD77B03FA1B5FB7ACB881F2831F
-:1023A000D24304970FE173A25F732619EB522B9B64
-:1023B000CF2493DDDD3B7A932F06FD97BCE9781D92
-:1023C000FC09E23FF06B88FFF6B415687E8C15C7F8
-:1023D000AD3CAA78103F95470B8E57A07F71A2A8FD
-:1023E00000D5B974A280FC987CF4636C21BFA65B15
-:1023F0004FA6733FA6AB358AF20B121BC8F9870DA7
-:102400008AE09FD50DAF93BD5FDD2847D42F6AEFDB
-:10241000DD99AED038CB34FEA997DCC41FBB78BBA6
-:10242000BA710FAD6F95B19EE85DB3DDC8EFEFE017
-:10243000ADF67D581F8BF7213E8EE325A0C3349364
-:102440003F03F3D3C732B99FAFA7C7E7E93CFF719A
-:10245000ECAC7700F2CBB142EF507B2F76C2C78A4B
-:10246000785C2B097C37F07353FAE73E4B97C477BF
-:102470004222CFB76AEDA974AE3FA7997AFF2EE04A
-:102480006FD2B57309EC31430146C546FB06E1D76F
-:10249000A7867DD761CECD46F2174E31FBEB58EFC4
-:1024A0003843D3B3E3B87DD5E7CBE789F73C9B55F9
-:1024B000BE5FA43B3F334F3BDFA43BEF364FF83BBF
-:1024C000F374FECED3E9C28F1FC286A01EAC17E7FD
-:1024D000EFD60E8FF287E7B3F4ED61B12F82E78775
-:1024E000B0AD19FE2EE57D8EB59E7D85EADDCE462A
-:1024F000B1813CAF47F9EFCA3EF2DF35DD723937C3
-:1025000082CF34BA5C12DF83D1D365B7A6AFC4BE25
-:102510005DB4D8B7F31BBDBB519E2B2D174DBCEE40
-:102520003068427D56339CFB4D974A25DA6F073859
-:10253000FB9BC3F4FBA5541E7FDD7F8B4479D756EC
-:102540007C1EE3AC7A89EABC2B03ED26E4A7210DBF
-:102550008B1F26B9F5B1D32CECBB1A332DDC4E768C
-:10256000D34F5B77B71D8BF7717D9C482D3E8F76DF
-:102570007186B083FA735143597B593AC033DF2DCA
-:10258000B9B01EA02F3ACF5E30EA7544C3F5D2BB76
-:1025900033DDFB4E3ACA79FBE55B308F7A6CF86726
-:1025A000FDD18E56F5C1C71F0B3CEBBF2BE31AAA1A
-:1025B000D6E2F7556A9DDE0ED29F866F6347301CC8
-:1025C000A7E3376B25A41323FEEF4B7E3E13E37E78
-:1025D00096CEBF770FB8A77D9755E9BC4EEB98D143
-:1025E0009F41798A9CEBDBF7AAD9F7462EEAB3CE56
-:1025F000D6A3B9A630BA5E5C0B7A00ED4AF3C1648B
-:10260000D516CE7706E23749D2F84F11F632920F3F
-:102610002F221FE6607B267610EAE35DA76207E3C0
-:10262000787B79DBCDAF4DFC7BF6101F0D9917132E
-:102630000EDFC304DFA57A3E0E631D43E68C0CBF9C
-:102640005FDB171F5B33888F3B22F8585B6F3D7E43
-:10265000CF07E38016337DCF07F3D78E3039199A31
-:10266000C1F5CF58F1FD9EF1CC47DF391C2BBEE3FD
-:10267000335E6101251EF7CD0232DFF7E5E72DC697
-:10268000087E1EAB045AB18E62BCD8E799C0DAE965
-:10269000B9292C48AD9BD9E91C451173513BCE1289
-:1026A000988EEE544E7D3DD525069215C7798B3810
-:1026B000AFD10BDD42EB57E8BB3DC49F329ED7E95B
-:1026C000FDBB2FB333B8DCD3C74590BE9718E5B92F
-:1026D000F07B6D38C9448595637DD3648559A2012B
-:1026E000DE5D870C24CF2D1DAA1FEB535D09E2BDD3
-:1026F000CF19D5E18E757379459383F518DA7AF59C
-:10270000789800E3619E6DAC029128E13140F3DDE1
-:10271000C8F8399242A652FD736946A6D0F7418A9D
-:10272000A38A218E427D6FB0F8081FD33354BA8F2D
-:10273000FB25B130CE848D127B0FF73FB2F87AB50E
-:10274000F1270023E0F9C2E919DC9E614AF5BD7862
-:10275000BE8F124B05CD2576FE9DA364FACED1F532
-:10276000E2B52B997FEF32F6CE60E7CF0A42FB4904
-:102770002EFCEE516CE83B9B2EEDDF830844FE7B84
-:102780001077642CF911F2A356AFC7BCFCDF7DD0E3
-:10279000D7EB85D5E7B10B61E7B0B5BA926DFED93D
-:1027A0002A9EF35B9068A173BF7996FEF968C7060D
-:1027B0003ABD34FEFBD2F6C13498E21FED8909F12F
-:1027C000BB95B9C721BE437583FC3B50DDE7AE9294
-:1027D000199D57B49A797DE563201FF81D26902E28
-:1027E00015EB68D883C5548FB9DE6171E17909337F
-:1027F000C26D0DC15D6B11DF05B5F07D717D3D686A
-:10280000ADCD40DF1DAD65D1740E3D29DABB2E0381
-:10281000E0BA2FA688CE7767EF9CE444BF317CFDF9
-:1028200093B4F51B7AD647C27A1FC9E8A51E515B3F
-:10283000A7F6EF76D805FEB475DBB5734A6E25E2D0
-:102840009C92868FC7A2F9BA8DB8F39F45EFAAA8CC
-:1028500037F4EBFDFFDC29BC16A06400000000008B
-:1028600000000000000000001F8B080000000000B6
-:10287000000BB3D36660F8518FC0C19A0C0C5DD2C7
-:10288000A862B4C41D120C0C9780F80B106702EDFF
-:10289000F5926460F006E26D40BC1D88C5A518186D
-:1028A0000280381088FB80FC7E204E07E224A81BA3
-:1028B000B30519187281381F880B815848808141EF
-:1028C000588078FB8B1519185EAB22F85A6A0C0CED
-:1028D000C91AF4F3FF60C381B6F4B5EF16D0BEE5B4
-:1028E0006E08BE0490BDC20D55CD4A37FC66AC42A1
-:1028F000935F8DC65F83477F810D2A7FAB292A7F37
-:10290000AF3903C3072435DB4CF1BB051D2B00FD9C
-:10291000A788274C9730A2F22732A1F2F9A17C00B8
-:10292000BE1E313CA80300000000000000000000B3
-:102930001F8B080000000000000BED7D0D7854D5C2
-:1029400099F0B93F7367269999DC24433260126E7F
-:102950007ED0A001879860B0586E20E147A30E0892
-:102960002CB440262888166DC49FC6DD500609BFCA
-:102970000921E14F70D11D105DEA63FBC5565B75FF
-:10298000BB7682D646AB3568D787767765A015BF0C
-:10299000BA761BD96D976EBBF57BDFF79CCBCCBDB0
-:1029A0009900FEECB7BBDFF3C5C7E770EE3D3FEF24
-:1029B00079CFFB7FDE73C725BB59701A631FE31FF6
-:1029C0009413731963B5A9B2C5C362D9398CE5767E
-:1029D000488CD530B6B25D89CF827F1676B4BC8282
-:1029E000F5E56D6EC35DCA58FF036E7F0DD44F6F62
-:1029F00057C26EE8DAA8F8A8BEACCB15761BF07CFF
-:102A0000EB472FE7E3FB8D5298419DB1BB199BCC5F
-:102A1000D81A0FFC13EACB2A921DF8FEDD2D52388E
-:102A200086AF99E99B04EF6F65FC7DF3038AC6646A
-:102A3000A8EFBBAD894D64EC961E98C5430DD9C770
-:102A4000BC3D63058C45F823D6B205DE57A6DE47AC
-:102A500058D7470AF46B8E399EEF9BF53E0BE07B0F
-:102A60002DF51CD6730CFF3185B14B993F783A1B7D
-:102A7000FE1D66E18F15281BF2191B9DC297B364DA
-:102A80000CA01FC5D85CC65CAC1CC6A9BDCCC5CA11
-:102A9000607D161EDB381E97354984C7653E46F5B6
-:102AA00077E74AF1074BA91F9B5E0D253C2FC88392
-:102AB00032C8CC4228231E96C806F8E7B65DF61E3B
-:102AC000AE7F034E359ADA2702F07E018BBA18C02A
-:102AD000F7672C46E56216A7F2CB2C41702C6543B4
-:102AE000252AD4EF52129B18CC130E45A7E3FEFE05
-:102AF000AEFED8BB12BCBFBF5AAA9D0225F3E5D1DA
-:102B0000BA2FB43E6B7E9545AEC37118935D113FED
-:102B100063E3AD751E66B18A20637A8F8FD3CB6174
-:102B2000D6CFA03EBE41D04BE3FB7208D6DDF33CCE
-:102B30000B633D049B3905EAA1AEACF806A8F73C4F
-:102B40001EAB47BC1C6B01CC43FF638D6E295A053D
-:102B5000A54B7745A00CA98C2980A7FA86F592028F
-:102B6000EDE646F938E34D4D665742FD704C52C5CF
-:102B700073ECAFEB314987FA78A83F28E17BDDC5DC
-:102B8000609C86865C57B20AF1DD334687B2E2B0BC
-:102B9000969001BFF5A64ECF195B4474355ED0DA2E
-:102BA0005C93F79B7B38CFCFE83DFBD3C7D67BC088
-:102BB000EF25457CDF8E1D2ECB417859D4DEBF48F2
-:102BC00065314F5E0ACF3BD7C10B770ABFBB0E976B
-:102BD0006D45BC1DEB53C382946DE3C3B8BD0DF0CE
-:102BE000FE4C951C560CE4B3220E7F85EED77DA9D2
-:102BF0007176AE83F697A5E06854A6F6133E4C4670
-:102C0000FC38B706DA57A5DA3F81ED018E3D080F93
-:102C1000F55B73D48BF34418CD33123DBCB04EA793
-:102C20007E83621DD7FCEF30EDD3DC861689CF2B77
-:102C3000E06BB0C36795167C238D7F4CC0658D6FAC
-:102C4000CDF7C4BA10958D4AD523F7E2BA8E687CC9
-:102C50005DF38DC77723FE8E78C231A83F79DDDF23
-:102C60008CB91786B862FAF3973FC370BEE50FDFE1
-:102C70008EEB7A2E8BD6F5D487675EBB910D9FF7CE
-:102C80002D81879F9E9B3F44756BFEB9A6344602FB
-:102C90003AAB34A5840BE8E558FD571EBED7C07A81
-:102CA000BF89F2A4D23C664A504E846168BF99FA4B
-:102CB000A78F419E554277E4C7490D520BB67BE280
-:102CC000C687BE741F3CFAA98BC37DC55F72B82F3F
-:102CD000BB7EED9308EF6537AEFDF93350BF02853B
-:102CE00020F0DDA537ED5FF377F0CF6F2CFCCBE55F
-:102CF0007B18C9855836C0916B4A0CF777D9F7DD38
-:102D000036B972EC793FC99542B33486FCB7AC4F03
-:102D100022F9DCDF08721FDFFFCC1D77237F3D2007
-:102D200099D4FE59771CE5C3311763288F971DF797
-:102D3000C6915FD8AA6524AF2396BC36F397DE0B05
-:102D4000E3BDDB60C9734EA7F41ED6F7AEF98BED79
-:102D50005743FF33A62B8C62D392174E3CBF2BF008
-:102D60001BA92F273A58A6265DE10CF4D0DCA6D883
-:102D7000E4767DC349A2AB6550B2343E9D2BF86C1E
-:102D800059C32F047FEA24979CF0BC515B589C895F
-:102D9000EE4E09789282DEDEC5FDBE0CE1835E4810
-:102DA000375D4A5C4993D3F0E78A4CA07A0C59FA14
-:102DB000962D76382DB9DD12CBB6E92B90BFFF8268
-:102DC00072B3B92DDFF67C6E0EAB9DFAE9E4F01F0D
-:102DD000480E27258207F42FED7F242EC5512E5A49
-:102DE000FB7387D89F4805A3F5FCEA80148FC1FECA
-:102DF000FEEA8858DF3E29AE4844AFE6690F8E0BE5
-:102E00007396A7F6FF76B1FFA9FDE3F8B1F095D26E
-:102E100073B99B9200428B2F5282F2DAE21F0BBFF2
-:102E2000FD7B7E5482FB57D856DA5D87701E508832
-:102E30007F3FAC3F598CFBF6AE0BF00AFD23871F9A
-:102E40000B305F0AFE1621073FE8007A81E712C2C5
-:102E5000599906A780DB857568777B83D4877CFAD0
-:102E60004B31AFD5EF475B66CC44FCDCD12331C49A
-:102E7000CFED477A97FD39AC7F753C3B8C53FCAA6C
-:102E8000B1387009C0B3A2C7BE9FA7B6DC1C40BA58
-:102E9000F9B02FBF00C7B97D6A42433857275ED5C6
-:102EA0000CA0B35966AF96CC40571FF66D0860FB77
-:102EB0000FD59E1BAFC179F629E1F530FEEA23A5B7
-:102EC000334D4EA744BFAB057E4FAA3D33C7007CB0
-:102ED0002DDF282779F05E9F323B9E417E7E5D523A
-:102EE000880E56B7B9655CE748F4F261878B2570A8
-:102EF0001E3541F81CA9DD077D2DF4BEFF81C21BE4
-:102F0000D07EBBBDDD45F2E2F63637D1D3EA0629E5
-:102F1000CEA414BFAD10F0AEDEADD0FB93A644F24C
-:102F2000C3DAAFDB05BD9D3C7CD52BA8EFCF80FC81
-:102F300041B93B63E30FB54B000F2BB67079747248
-:102F400077EED27B508E087D798718F7B6B862E3AA
-:102F50008F95EDD9B6FD8876E5DBEAA78FE4DF58DB
-:102F60008774DDA590FEBC65E3635A88E493DDDEDB
-:102F7000440E9B5490B22F4FB0A105D748297AB286
-:102F8000E8E7D636B03703C3EDCD962312D9A317A1
-:102F90006D67B6819D3971B89D69C99108DA67E599
-:102FA000293962C98DBB94E8D820C0F16B57F4B2BF
-:102FB000FC72921B0F48B54827FA6FD1AE6431A559
-:102FC00016E5DBC5CA0B5AACC547F0F75E07D0550E
-:102FD000067A9D817405F3CCECE9CF48CF33248386
-:102FE000C64BD1CD2D01E25B1C14E068F6985D085C
-:102FF000E72530B1B79A4AA6E4F15285FA668419FA
-:10300000E8E1D45A297EA894B7F3A13C05B8AE8173
-:10301000E7CD5D97C7B7496817C21FEACF366E770D
-:10302000433BD39F47CF4D09CAA2F6D297717F2E5B
-:103030000101A055F3F6380FD8598412689F7057D4
-:1030400053D75800CA62E827F3FEF41EDB05488E0A
-:10305000C769BD383E8E53A1C4D7A09CB1E878990A
-:10306000903B20572B55A0AF66961546BDD9DC5630
-:103070007E5EFBE586B05D7EDC5467D703734DBB97
-:10308000FCBF79F625B6F60B22E5B6F77FB6E80A5F
-:10309000DBFBC5D1AB6CF52FAFFA82ADFDD2D619F3
-:1030A000763FE9A7B9B49E35822F4782FB75212F61
-:1030B0007FE2B04FADB2E9FA44CDDBB04F6C9D3B3F
-:1030C000FC381427E6B0457D6972C5274B84CFDFF5
-:1030D000009B70FFE04F1F131E437CDEA6BF70B73E
-:1030E00066A23B4DF4437309ED2567FB138B619E8C
-:1030F000B47EFF26494487E7FA314FCF2F01E4160B
-:10310000E0E41C40FD9D2C5982FBE6CE35E8FD5DD8
-:1031100072B200EBBF61437BF3717F7DC962E49FB4
-:1031200066953D27E560BFB0C70DF38135C4DA80F1
-:103130003E5ADA7E741CED38C908B22558F7F812E9
-:10314000C8DFACC3F561D2C23BF0616F28FAA104BD
-:103150007048EDFDBF97F0FDF799817A98258B7245
-:10316000D17FC4A9D2F9B069066B457C9D68B4E3F0
-:10317000CD2BD6F17349A676CF31F3B7C8472725B3
-:103180009DAF4FC0BB4D32CFE27C16DCEFE6EA1AB2
-:10319000FB74702B722DC2FD23827B432B4B662B5D
-:1031A00023C37D0533DDF2A8E1F09C656656A6E7F2
-:1031B000B3805D333DBFDCCD2AD15E3D216585D72F
-:1031C000976239F48F5F03BE8A7DC3177EDC184E89
-:1031D0001753E55C9ABF59D8BB85ED52221BED53BE
-:1031E000E621FB95F53C647A50AE0911D7D2269DB5
-:1031F000C4F5B38E4633E949AD9719124B6F776E1C
-:10320000DFDBDCD4DE923796DCB2F069C9154B7E89
-:103210005978758E3F929CC1F1D43C843F3A494E17
-:10322000A7131DF03101E131AB71FFAC7D033732E3
-:10323000E6A91E79DF2C3905ED18FAFF23ED17E01A
-:1032400089EC3A5798119EDE0D0E2D7D0AD63DD0A1
-:10325000C6F5F5BB458CECC3336D570DE4207E3CC1
-:103260009E0AC44F219F8A150687D6A17CF5A9899D
-:103270007E84AB50E82F2FE3FAAB90193BAE46FFAC
-:10328000BEFDE4126C67ED4FAED89F66D81FF447C1
-:103290009A7D43C56827B951AF413B37C85D94CB90
-:1032A00085EDEFFF07EAC542875E4448583A1C594E
-:1032B000553BAE36D2C7FF6823DA97D6B8D4217D06
-:1032C000FF83DA49C46F61FBE6BB95806D7CE963DF
-:1032D000C48390DB68769D9BA714ED5539E10EA45D
-:1032E000E8C20997D56F243A61E9F394DBEA644FA9
-:1032F00038EBEEB06693CFEFFEB13CA7D5771E7AE0
-:10330000738EE7A46F271F083C7C0A3ADDC4E9945A
-:10331000CB058B6FFFB3E8346AED6B2CF78E23A8D7
-:103320005FBBB4F02C03ED84A11F723BC16D1C4246
-:103330003A8B495995F03EDAA192DD68D915FD6BBB
-:10334000FF7A4B193C3F512B931F71623DA7FB3D08
-:103350000F707BD4D2DB51A1B7D12E40BC82DD30BF
-:10336000E0E6A507C7F1AFBFB95402B83DC650BFEC
-:103370001BDBB71964AFE6D4C5F54628E315873CD7
-:10338000E38C945C4AC6F2F396C37E7D2BD7581625
-:1033900021FB3A3A7AAE3FF5FEC732D74FD34A58AF
-:1033A000DE6C182FB9550E3F08FD932EBB1EB3CA15
-:1033B000350AD797492F2B413F78A476438AA557E2
-:1033C000758DF665FEC071DCA791F6017640A738D1
-:1033D000E6393AE478877968FCA4DFAE874E0A3D87
-:1033E00064C1FF09F4EAC262A08FBD5266B83F1201
-:1033F000E3459F030060BFA32A3333B573AEFB1FC1
-:1034000044BF84ACD27C3B2A76CEC6FD8EC5947078
-:10341000FA7E58E55F285C7FE6CC6DC86D84766CDB
-:103420007DE67679A2DD63F7652D42FF0A50A7623B
-:10343000BC2614D3E7CDC678E4D4BC49E863FF18B2
-:10344000F50FCCBB3B72466FF17D227C14849491C6
-:10345000F1F1A62CF37D74F0ED1E70D7507E262579
-:103460000FC55F5A62EE8C7C6CC929A73C72EA39A1
-:10347000C934595BF570B9628DFB49F519C8872CC1
-:103480006554CA6E3FA7CF2E961E47900325328BF8
-:10349000F665F04FAF56389EFA633C4EA19A32E97A
-:1034A000AD994A1393004F1B828CE4411EEE35F216
-:1034B0006D038B030A583E0B0FF8509E046596204F
-:1034C000BFD5E9079A4DE8070639684C1F55D65F06
-:1034D00008CF83F357D239038B7079ABC37F9C8FAE
-:1034E0004CD2176E81D7686C12C539F39AEC72DC36
-:1034F0008D7E20C847BDC1F17CFE4C3A6F70B3B4DD
-:10350000E7B08EAB147FF03498F6AC9AD5207F5696
-:10351000EFBF6AD76218BFE6919BDFC672F2C17B2C
-:10352000F2BF0465DDE3BB6EC6B2E4B5E8D84CF18A
-:1035300054AB044E61721DC0E763863B67E476C6F8
-:103540007A25827635EC6307D24332569E85F4BDE8
-:103550004AE1FCDFBF400B607C46DDC2E5AA3A1FB2
-:103560009047F4CFFDF4E6943F4D7E852AFC24A5D8
-:103570005DA13842522FA378CBA12DB28625C8D9A0
-:1035800018CE63CDDF2BE2D49D22DEEA84AFB76490
-:10359000A818E5E089F51F917DA8E859E1D9305FC9
-:1035A000979F95101C225ED02CF62FB9B6DE931E85
-:1035B0002F52849FD37174CE80817430A084BD0655
-:1035C000F18D86E346B74C67187F99A58719DA1302
-:1035D0009DC2EF517C26C37DCDD6D94CF46BE195CD
-:1035E00016C2FE552C9CC0FEEDFD885B58AF793BA2
-:1035F000F2C10FAEE576C88952BBDC0612EA823D05
-:1036000065B38AD6AB489B4DC1495721CDFF5E2992
-:10361000107295D3EB1BB5531EDB0674F09CDBBC1C
-:103620004719F509F8C821D77F006C82FBF6A8641A
-:1036300097E75679D0C9476D12D985AAC9D73953AA
-:10364000F9B011F5E446B01B0B8DE1FCB2F1754603
-:1036500076E346E0BF586926FEA99650465C2CFFEB
-:10366000E4B5E74A18C7F8ACFCF3978A38A713FC0F
-:10367000037496403BE651C9E89C02EBFBCEBEC604
-:103680001F4F81D7CF1E58917D0D94DF8B6FBCFEED
-:103690001A98FFF6C7F764E33E3FFA2AF0D379FCA5
-:1036A000788B9F9AD1863D4F9CCD586BE727637DE1
-:1036B00005F1D35B0AD75FFD0B7EF7C6D5FF9F9F51
-:1036C000CEC74F6F2B409FD3FE74B6387A1EF9D603
-:1036D0005CC434B4B7A08D89741E0DDA4B9F9A4533
-:1036E000F85EE7E272CCEFF272BB23C4DF3BC7FBAC
-:1036F0001BF593C70F16947F763E5DE7333FFA3C88
-:10370000F81DE40EC99B13E3EC7CDFE9E274F72BB0
-:10371000D7275EDF3B5FF81CD607763DD977D7A960
-:10372000CC403F60E20B1E1216AF8EDB780459626C
-:103730001A3C0FE5F1F7EE3C929771B46386944A18
-:10374000EA6F326EC737D56C3EC2CF25062B168185
-:10375000BF3C07FE85F6C8753EEE57C0382C04E323
-:10376000AFF6468BD551341EF997AF3EBF2F88F286
-:10377000E5758F5982CF5952CDC5F301CBEE18991B
-:10378000DF55763ACDCF7A5A6304C7A94B358A57AD
-:10379000A2180B407D6BE9A514A764E1D87109EB71
-:1037A000A37486725C094616931DD2E63666417D87
-:1037B0002B1850B120D12DC94DA5BD37144039006B
-:1037C0007609BE5763733D1AFA2FA3640C42337710
-:1037D000DB47E4779F28E6F2B6630AA3739A810772
-:1037E000FE6DA98CF64EBB9BCE2DC06E247E8D0A3D
-:1037F000B9910C4E0FB5A09F51A48525A86F8AFDE5
-:10380000E2F8D7B83C313D93D3E3233CDED112E25A
-:10381000FEAED3EEDBFCF5CBDE3470BC1FBED6753E
-:103820003994AF3FF9F3D72F87776F7CEBB51A8CBC
-:103830007BBBEB345BDCD1CD8C37D1DE029F29A181
-:10384000A17C8E9D5C829B99F2EBA418E2275AE33F
-:103850008FE37A91B7113FC9290A3F5F84BF10C037
-:103860001710F075074F55D13CB1F7FF2393BCA754
-:10387000BFC9428F40BBCD79F7C7518EA4E69B44A8
-:10388000F2290AF209FDC8A8AF67C91A9ACF1F7EAC
-:1038900010FBFC11767572EABCF0D096792D88E7A2
-:1038A000B90B3C3AD2993BB6F96EA473E73ACFF81C
-:1038B0001EBC144373B6F9814FDC159AE925FB97BA
-:1038C0001DA6FD104D2CB8755020187780FECB56E4
-:1038D000B00CFD0DE88FEB047986F6B6D50FC8D88D
-:1038E000C4F59EF14DBF94E2FD225E61F5BB292631
-:1038F000D139C14DE5C006E5C3F1B4C127FFE46B82
-:1039000078EE12537485D341A8220D6FF8678F9B10
-:1039100071BAB86C9F5DEFC2FC0B4BF17D4C217A04
-:1039200071F2CBF8B8BDFD06DFF9CFF587EF27C7F9
-:10393000F344C16F567F0B3E8257CA145FB79FCBCB
-:10394000DC5467AFCF1D868FF3C3355DB59FDB3485
-:10395000F8ECE3CD0CDADFCF2EB2D73760FCE6937C
-:10396000ACDBC1774F8F31BFA37E06BFDE92BBEFCA
-:103970007B227F4BE3A86186E3F42FD83B7F1ED0E8
-:1039800041A1CEED8EC2F90B1B726B504E31916787
-:1039900092D9FE2814FA5E697F49C9417FD4E4EDCB
-:1039A000934BDE9A9183E7C5758CCED3A3EA3DB1E4
-:1039B0001C23658FF4ABE55988E7CFDF1EB9DB9B8D
-:1039C0009E7793B2471E78D5A8C9608FA8F748267E
-:1039D0008C336B09D82355E9F648AB8432287B0930
-:1039E000D823647744DF437C8D6497FCD8B2EFFD25
-:1039F00099EDEA3FA85CCF829EF9A7CFA267C6796E
-:103A0000CD7F513F077B605A89B13292810E3F5082
-:103A100079BCC3D29F8DC1848267E7A03755173C1C
-:103A2000BFB62EF9128AE30E7D6710D70DEB71B980
-:103A30006A3FFD7ACEA81C9E892ACF8319A9DFB7D9
-:103A400046F057BC9A57D82DF6FDEE5FF08E2EA3A8
-:103A5000FF027E0CFA2F495FD9368C0B9E89A91480
-:103A6000AF53E7AFDC3D17E909EC6C4ECFE7B7AFDA
-:103A7000AF1D926D7C3CED6C968DEFEB99FD9C6ECD
-:103A800086C77E4ED7A8DBCFE96685ECE774730C5A
-:103A9000FB39DDF595F6733AA77D3F73B4EBBFA70D
-:103AA0007D1F6A64C44F17B0EF819F6E427A1A89F6
-:103AB0009FAECB37EE8F64D8EF6A8DDBA9ABBD919B
-:103AC000054877D30C6ED74563EB291F302F0AF2D8
-:103AD000A694E28614F7B2E25A56DCCBCA0BB4E2E3
-:103AE00059CEF89515F7B2E258528CC7AD9A3DD130
-:103AF00015086F73FB4919E588FE1CCC838C609D0B
-:103B0000E30D8BCF7179D0D29E392EE78CBF8DD843
-:103B1000EE53F2D5E7A01FD6E37A2DFD007CFEE040
-:103B200067E173905BDB70BC7F417E1F45F2A49B15
-:103B3000F6AF02708D763AEC838671FA05A7F763CB
-:103B40003C4E3DEE26BEBD58FF17131D64D8B42869
-:103B5000F8E018CF8AC64A49BF587C63F189D33F41
-:103B60001EC61FFFD5FC7391FE31F0CFF75CE7D185
-:103B700047C01FCF23BEA75572FC3AF9C1A27F20D0
-:103B80008984548DFB1D4D607B8BDED98B6113E1E5
-:103B90009C28FC9A13A335F22F4E3CFFEFFC1CF639
-:103BA000794F789C5823BE9FD85D10DF569AE23338
-:103BB0008B9FDA3DD11FBBD2F240AC7CC7C31EF352
-:103BC000757C1E52FB12E8AF8466B3F00683F8ECF6
-:103BD000187FCEF9D41766143FFDCC7ED95E571CF2
-:103BE000CF875AA4A1A58CFC56A621DFAA429EBC71
-:103BF00098153D89F86C9E1E29E1F43434CE077087
-:103C0000FDA243217FEDB3F253F348F83F878FE8DD
-:103C100090AB76787E40BADC42F9160A69F10D5213
-:103C2000067925F01567E131B83ED8CF7F473CE6ED
-:103C30005531899623F8B8D963FEC1F5D9EC0F4503
-:103C4000AB4DF131E0CDA3A15CAC06BC950FC7DB59
-:103C500049175FBF93FE426A5246FA0F811CDD206E
-:103C6000A59D930ABC58EB19493E5B749A76DE1009
-:103C7000D2D2D7FBFFA85CB6E4E5E59EE864DC079A
-:103C8000B71911F2CFA4FD75CA99E176904CE78C73
-:103C900067C0EEC16E172B5FA79DF5E261099B7AA5
-:103CA00056A1F2DAB37478C2BE78369B4AF36C3E02
-:103CB00095F56773A99C7EF6122A679C1D4D65C316
-:103CC0005900064C9CC6B3A554CE3C7B0595B3CE9B
-:103CD0008EA772F6D9ABA8DD9CB393A8BCEEEC1707
-:103CE000A8BCFEEC142A9DF68FB15E25F96DC92F94
-:103CF0004BBE3BE5B725FFFEAFC9EF58C345D93FE3
-:103D0000A0FFBEAA9D477E8F242F80AFEFD3D2E5C0
-:103D1000444A3FDFAF7D06BE3E2EF814F8F73D8CD7
-:103D2000C378C08BA3385598C7A9028666609EC623
-:103D30003E6C025BEA2F8D9CC4B841F3028F1E03D8
-:103D4000B8074A35924FDB821A9DBB6D96F4D15C61
-:103D50001E2413487F3B431A8DB7ED8F8A17F31744
-:103D60005E1A5510C079BAFDB28EEDBF959BDC7717
-:103D70000B9EE34F61E14330DE8A3D7B3CE97EF8F8
-:103D80007E340E00BE40EC69C680AF378EFADD523D
-:103D90009CCF3795513C064A3353BED837DDE27C81
-:103DA0005A1D0A219EB6FA64D207DDBA47E4A1265D
-:103DB000075AD0CFAD93D9369877C3E877B620D8D5
-:103DC000EAB8B21D6550DF5957E6C54D7AFA950F2E
-:103DD00042644FC03B0405CA8428CD1CD89F4E6F57
-:103DE000D838DF799B620CAD4362C5FEEEEA91DB09
-:103DF0006DF20F84903E3A264DAEBC05E6EF9D5421
-:103E0000301AE7DF5E73D4860F45B7C753140C38FA
-:103E1000A21F5E97A4B8DA06D9D85106EB0B887CAE
-:103E20006B00B33292967760C1A184611D1CAE8491
-:103E3000C2D7C30AE0796E5D2296E4EB3531EEEA33
-:103E4000F32543E82F2A75A729DED6E94F2EA2BA1B
-:103E5000030E6BFCDF6A565E00E71B9FE09BE649A2
-:103E6000DF5E4479E4551AED5BB76B6801D6636B8E
-:103E70005DECF10CF19B0D829FB7559E3F2EA3FA8E
-:103E8000EC70747BEDFEA205CFFBA274C2D1EC1ADC
-:103E90001A9569FF3EEDFC175AF7E73D5FE708F911
-:103EA0000397BBEDFB1010F2BC79CAB743782E6EB6
-:103EB000C1D329C13ED47CFEFBD03C85CBEBCF7B6C
-:103EC000BDFFD3C6FDBDC6E32AC0A7B3CB31CE38F4
-:103ED000667208E3B53E2B1E1D8E537E5200E3D161
-:103EE000D4CB203DA4EA7C0C456509E44339FBC3EF
-:103EF00004EE9352AD190AC9D9CCFBAE8437515E9A
-:103F00009B933F2DB8E96FB2301DE8FCD06BC5A77D
-:103F10000D7532BF2F81F15F8559E7B33C3E6DF5DA
-:103F2000572B648A4753203B6D1C15F4309EE328C1
-:103F300018A7CE1B3EFF7753F4689FBF88C7C715ED
-:103F400095FB81EF491C1FB15715CAF7EC7A9ECB40
-:103F500037769C91FCEEAA35E85C6507FC8FFE4342
-:103F6000ACD61747BA551CF978672AA787508E5ADE
-:103F700071719A8F9F0F509C1BF314296E6EB00ABB
-:103F80007CDF2D40B3C651ADB87CE59A49D8CE6FE1
-:103F900030CF73B03E7F1D4B5C02F006DDAD5B2F72
-:103FA0002FCD100FAF5CF38D2761DEDD4F4DFFD5B8
-:103FB0009350DF25875FAD8376F95FAE23BC3AE38C
-:103FC000E1DB2A655347F9E0F31DC27D051B9AE842
-:103FD000E2D61E2986CFB37DBE837CBF5B430AE257
-:103FE00005F424E2C5EBCC8B4CC77719C2B17360E2
-:103FF0001EFCDBBB75DE329C17E1C6FCCA15BDF5A5
-:104000001AEA99E012FBF985BFC95EF756D9E1DCDF
-:104010002AF6EF42F4EFCC43EC31E72D42BA3D13E0
-:10402000D418CA9B8D6BAFBE91E4FE76858D2BCDE7
-:1040300040BF8E75756A2ED2FFDD46FDDE0AD41BA9
-:104040000D1AE5F574C7BD714CF1DE5E973A37B1D4
-:10405000D9EF86C6CFB16AE4843B931D2FCEC70249
-:10406000E219739C8375CF96C9AEE9EEE1F358E38C
-:1040700075D7BDE5413931D2B84F8F318FB8D19E58
-:104080008AE65DD4BD8BFB36BA385D4FD1E252294A
-:10409000DAA3FAC24550DF3C4E267B8809FFAFFB0E
-:1040A0005A7E9EF8B066D8EE576C9AB292EC869B18
-:1040B000DCBAE02FB00B27A4EE5B1CF09A2FB8E11E
-:1040C000B9FA1C8C04F6C07BB9E11B912E1A831F30
-:1040D000911D756B91AC237DADD8D348EBDAACCB99
-:1040E0002C8176AFDA4A466A136B35F13C00133502
-:1040F00091EEE6C01B99EE45240F75029C73C61520
-:104100004EDA063577512BE5B1341A12F961D70131
-:1041100066501EB4144754A90AFBCD7F07EDBE3983
-:10412000C15219FDFDEB54D6A0A5D9E760171F7346
-:10413000A7ADEBC4B83D41B90AE7877970FE451ECB
-:10414000BA4FE046FBF8CA947D3C1111996627FFEF
-:104150001A8D4A8C6714257E4F79DEDF4FCA382FBF
-:104160007B81556F933EB95F0DFEE52F713FE3CC28
-:10417000E8C754C3CF1A97F8BA26F649DC5B39EC86
-:1041800089FC06C7B7E20113357EBF79730B0BC7F5
-:10419000D2E22A9B9FFFF3E368AF5AF197737977D6
-:1041A000024E0BEE4D12CB223DEF89FEC19DEE1764
-:1041B000B364D9DC099F1FDC19F2E57CB5C04F63FD
-:1041C00005FFE4D55678516E8EC57C1FDC87762EB0
-:1041D0004F4CF82F3DDF4711CC170CB7F6CBC6700C
-:1041E000B9A4887B5340D712DAB1CE7C2005F37E88
-:1041F000260E971B0704FD5FE211F93F93D964EE89
-:1042000087DBCFAFFC4BB9DE67AD7919EFA17E5FDD
-:10421000E8FD17855F9910F71A8F8A7B8B2FAF33D4
-:10422000C8CF7B655D259503EBC2F4FCB57575546D
-:10423000A6EE57F179F3851DA662500DCFF97D2CBE
-:104240006E00BCFE516B064A91CFEBF8FDEEEEA678
-:10425000535BCAC96EE4E7169B8BAA1385E8BF00BF
-:10426000ACF95077F9FA3CFC9E97395859C0D51CE7
-:10427000E2FDBFFABCC24917BAB5FF8EFDF6B156D2
-:1042800086F22E60DAF73B3BECF46FF8FEBB8A2E29
-:104290006EDF7BF11FB08F5FB2F6FD6A7635FF3EB1
-:1042A000C3C5C963E4A34A2107C6003F1D007FDEE2
-:1042B000ADF07CF57C9EE76A8638BF992AAFC7C609
-:1042C0008BF62E4E426C208FE7B517F3F304EA8786
-:1042D00079E5F81EC3922FF0F816CB11F9EF63C5FC
-:1042E00038ABC5B813ABE9DE2E3FFF677D3A963E8B
-:1042F00096A47A2EF0019641D62A2132C7B041F217
-:10430000B78BA521AA1B929E85F532295CC6FDF0CC
-:1043100038E9CF72C5FC7605213F22F3785172311E
-:10432000D993A097512EC6D5C822942F1BDAB4304A
-:1043300060E25C9E1CDE9FC372435FCD009E7FC423
-:104340006232C91FE53996A55F49F61EE9AF0DEB4C
-:10435000F30E6653BE4692F2DCF77B4A6D7A6AA290
-:104360006FE1753AECD746914FE782FE2C43FEA9E8
-:10437000954F07E396647A6F951BFDDAA24C7EFF9A
-:10438000C31E49C43392A3290E28F6353E55CE7874
-:104390009F719F87DB358F9666B6A7197B90C6DB2A
-:1043A000EFD11DE3265BE8FE8CCEE31B592E93F282
-:1043B0006B36B6F17BFA16FE46835D8BF6F0C6BE11
-:1043C000F9B391BF63952AE59BC3FA7D883F97C8EF
-:1043D0004BDE383E78309BC7254A514EF723FE6AA4
-:1043E000D3F0175CD984F8EB7895E7F7823EF7B104
-:1043F0000CF98616FE5C3EF6C54CEFADB26394B682
-:1044000028D3BDE1A31ECB4E4F96723AE1F8CBBA4A
-:10441000568D646A9F10F82E2963D1F3E1AFDFA3B4
-:10442000DBC6B5CE7D9511E25D922F4171AE891A42
-:10443000B733362CE678DDF0FC35C7A369E710BF4B
-:10444000C421A7A4E2C156DCD8D29BED9EE83F7AF6
-:1044500046A5F425FB3E23B9CB5EF01CC47DCB7092
-:104460000E71CA539BE11CA2E7E2BEEF3256F0ED9B
-:10447000A12D47E7E13C7F55C7C8BE0A3CC3E7CD45
-:10448000D5595C2EC5EF149812C659AE89E8F56867
-:10449000BFB9DA9989F9336345DCA6B0BD4F41BA9B
-:1044A00008C25E164A78AF2919C3EF998CDDCDC8D2
-:1044B0004F540B67AE5A6F08519A961FA5B0A17E54
-:1044C0005A5FBB663C5E4A60FD14F5C318F13ED0EE
-:1044D0003EF3572837C744A294870BFD627EB42F62
-:1044E000041E0BBC9C6F9737842509DA0783498A21
-:1044F0004F3AE5FA18C0CF2569F65B40D4D92A2E89
-:10450000A765F80FF57C7EC42EB7C739EE45071CAA
-:10451000792FB95E91EF6EC9ED22BEA913D441394E
-:10452000935F9ED2AF0EF8508655A7FA07ACFA6794
-:10453000840F0881E8D98207AF52A2DCDDE3D2BF45
-:10454000F214EAE77A8DE79189FB72D902EF3E74A3
-:1045500098A1DDC094574CDCD71D61FE5D9A3353A2
-:10456000E7911F9A5D67DDA7E3F795A18C619C2E0B
-:104570005BCC6FDDABCB66C69BE5400FD96692EE98
-:10458000D5E9D677154C96C03C1CDD27531E9DEE11
-:104590008B907CEA59E0D1F13B1F9AB8A7E712F75C
-:1045A000C7B3CDD374BF2E7BD8FAF8FD3A0BEEEC2F
-:1045B000ACAA37CB0DDB3CEB31BE0D6B1F9DF17E02
-:1045C0005D1DF793B24D1E87481B9FEED7ED985A9D
-:1045D00066BB5F47F3A01F27E8CFBA67E784EB5CB1
-:1045E000BF9ACC76DA84B0DD8EB8D0FD3A57C8DEFB
-:1045F0007EC705F2B33EF1FD3A818761ED1CF6A05E
-:10460000CBB24347C90CF7EF4C834CDF11C9FD28EF
-:10461000199921515C82F4BD65E7E5F1A1FEDBD972
-:104620007979565EBFC3CEB3ECB7DCD9767C3BED6F
-:104630003E775584FA5CAC9DB70BFF01F4F290D73E
-:1046400061E73565A60FA7BCC86783BBAF84718ED1
-:10465000D6FE48C17CB55DB9FCFB476C987FF0D6AF
-:104660000CDA171FFFDED1AE29FD2A7EFFE6774B5D
-:1046700019D949561CC12D60DE5524AFA7B07BD790
-:1046800043849FA0C043137E80AC8670151F477C77
-:10469000667A316F21BF8951A3C28A30ED3B7E9685
-:1046A00040A64B5B3115F5783D62250D4F333CF646
-:1046B000EF0434EAF98E7DB4EFF3B973F007F9F73C
-:1046C00014E618F67DB7FC24346771BEEB2BED744D
-:1046D00070428A0C2AD0E5E9AC5261FF0CEAA82F9F
-:1046E000BBD7BAC86E7C6849D9D62BD15F0DCA3A00
-:1046F0003F8E1C1A87F651F351D38B76DEF6C874C1
-:10470000EF3878FF50871246F3F0A9256B5EC57A23
-:104710006CB78BECA0A7FAE615AC48E3BBCDBB1792
-:104720002C5C8CEF3B5CA4DF57ECB96FA03488FDA8
-:104730005DB5E9DF9B6AD9789F8E7EDB1BB5DE8C89
-:1047400076CCD559DC2ED9A82529FEB4719EC6D0C9
-:10475000E5DA58523F7A05DA0FD76819EF93DF95FB
-:10476000E5E6F7F95CAD12CAF7C268E67B0156BB15
-:10477000B135BFA5738CE06C99A11FE7BA7E9E8C02
-:10478000F587605F7529454F79829E3616DDBBB58A
-:1047900002D73790F9DEA155AECD1AC7E93462E7EA
-:1047A000735761D3685CB7CB1D19A847E22A94758B
-:1047B0008C8BB8DCAD919BD11EBDDA8514CE3677DB
-:1047C000FCB06111EE4B58D2259827A84656119D92
-:1047D00005B318EA8386259156C44B21E83F0CEDBA
-:1047E0001516FD92CE290AEB34E685BA67494FC209
-:1047F00005EF3D15D1AB10EF2FADE5DF79290CFAB0
-:10480000E85E5061849FC315B6BB199A0C1BC105A5
-:1048100076917F20519CC8C947D6BA9A977239BE03
-:104820007BED6F4765FADE4C455619E1D56BD8D75D
-:10483000ED41BD0BE34C35079710BE6BDC2C4EFCF5
-:10484000EB26FADE55EB22B8764D39F91584EB7775
-:10485000BFCFA2FDBE969912C2953FC4CF59AD7984
-:10486000F29B06151E0FE77CE8E43B8B1F9CF0EDE6
-:104870009C3D8FCEE336B3C1F988EFD85999E868EB
-:1048800073D11A6F7A5CB455D01FEC03C99798CED8
-:1048900068BF957F65EB311F76E3172395C81F6FBF
-:1048A0007BF9BDD5FB966AB48E87E66A146F7CC827
-:1048B000DF4A747F6AA32B7C08C151F585B89FBB82
-:1048C0008B2BC2186FFB3B3C7C4EF30F768FFA525A
-:1048D00025E2F38B7FC8E2E34C51AD717E46F45E76
-:1048E000EB25386728ED3F5B8176E8127932E54E9B
-:1048F000AF5A42F2CB25E4F8CB4BF2EAD14F09DCB8
-:10490000B09C7179C8E31481B5D5FC3E8343EE2792
-:10491000EAD4DD33689778FCA75EC8BBB1374CAFEB
-:10492000C775D60BBD60AA99BFCB982BDA170E4579
-:10493000D0241B16FFC915FA63EC6EC773A117725A
-:1049400087C5C1072B6E06F9F3A52C61478E10F7BA
-:10495000D9B5641EF1C319E0078A4B979C24FA8FDE
-:10496000819C40BBF90D29195A91761E667D67EE30
-:1049700027221E14314B294FF82D110FFAA9F8EEFA
-:10498000DC3B221E745CC4837E2EE241FF80F1205A
-:10499000FC7E98F772DAB771751FF5631C6767CDF7
-:1049A000028F01E34CD5075F4220BF680EFA44FE38
-:1049B0003DC11BB4F4D0DCF3C7A91208971BE35226
-:1049C0001CCE97C5F7E85E11700D08B85E137059DC
-:1049D0007A10E506D2191BABEA99E461506D95F0A7
-:1049E000BC17E5457F90E405CF130FAE918C09C34A
-:1049F000E5048C373ADD4EB7E8EFD4281FD1B17308
-:104A0000FC47B3F8BDC397D6CEDACF8269F228B29D
-:104A10007015D25D3EEC0FCAA3681397E351BC77C3
-:104A2000912657AD781AEC4898F4CE0D1C4F23C947
-:104A3000970BC99542875CD98D7205EABB51AE04CC
-:104A4000D3E54A6B3FAE3B887285A5F45030F2C97E
-:104A5000E4CACFBC65B63889255FAE0636263B3141
-:104A60000CFAD4FFE9F5E9DB424E5C48AF5AF91F76
-:104A70000193915EDF837921E8CF8C67740F473112
-:104A800007299F28B7DDC5301F642B76198DFECC12
-:104A900042CA07D931DFA3235D3C2C254288CF7D54
-:104AA000528F97EF8BDE8FF6C2B6093C4EB2E38F82
-:104AB000F778D1CE7EE9F682009EE3F4E65A7920BB
-:104AC000FAE25BA17EAA91119DACD8B3C296F7F031
-:104AD000F3AC3CC2476E0CE40FE0E3E1DBB9FED17E
-:104AE0000D9E070265C63C10B74FC483D45808E931
-:104AF000639B14F5501CA651263DD51BE6F92BBD32
-:104B0000E097E3F9606FC3CE39A89F37DC2A33CA38
-:104B100017AFECB907E54CC7848506F2A56B74D9CD
-:104B20009B688E6FF0C9DEF43C523C4ED0AAF9B9B6
-:104B3000A128CD1C0079B3D734CE777F54157E1FC2
-:104B4000F6779F270FBE3337341AE304BD8D0B432E
-:104B5000386FEFA848288FF253C6903DB071D4A6A5
-:104B6000C5187FEA58AEB1743B69D87C41BB7D6DF6
-:104B7000C519D5069E3FD22173FF32579C4F035F64
-:104B80005522DED2D78970AA26CF1FC1F52A7CBD57
-:104B9000F47DD3DC06F00FABF8FAD17FD57DFA684F
-:104BA000941F6A03CF1FD9ECD717A3DFE884C31A79
-:104BB000FFDA6CC9E61FE956DE42FD1A7E8E58C444
-:104BC000F3167A5DE7CF5BE810F2D0F21B47C2879D
-:104BD000CB714EDDEBB5C7012D78AE14A5138E91C8
-:104BE000F2053EEDFC175AF7E73DDF4879046BB25A
-:104BF00025DBFD8A5C2B9FA5714D08E58405CFE67A
-:104C00000BE48F7C5AB89A1B79FBCF7BBDFFD3C6D0
-:104C1000ADCFE6FA11F87400EF51764C9C19423989
-:104C2000948AC70C0D94A33D27EE335AF9232E9D89
-:104C3000FF5355F977EEE4EC22FACEB23A9DE78FB6
-:104C4000D05F863C904D8CCD467F4715F11B279F4A
-:104C50005E087E67DEC8CD3EE137461DF3893C1114
-:104C6000E6C83B51433CBFC4CA27E992607DC154AA
-:104C70003EC888F33AF0365EC8FDF71CFD87AD3BB1
-:104C8000CCEF575AF927C3F248A6CAFB710B86E549
-:104C900091887C949E5C23CEF3C4795E09AA4D8CE6
-:104CA000E70DCB23993A3D84DF949C5622FADDC070
-:104CB000E8FBBB3D5E5EEF9DC3E2F8BDB35EAC2397
-:104CC0003FD532CA6B19965F32750DE14963916524
-:104CD000FC7C879FF75B7870E6975C90DE2E9047B0
-:104CE00012F459DFA388D03C3DFEF04FEA083E990C
-:104CF000CEE30BBE743C9C3EFE253E2E277B441E1D
-:104D00005E4FAE3D1FEF3EB12F15A29D737FF52282
-:104D10004ED75DF53AC5DDDD0D3C5E39EC3B103517
-:104D2000767FC019CF3B21E4F585D6EF8CEB6D1B68
-:104D3000E1BED9021FCFE37A68C921CA8B3DB30A0D
-:104D4000F42CE0EB61CC67A9B9F87C96D7B3783E38
-:104D50004BAF51BFF052D463518DA13CEDC57C16D1
-:104D600078BFA161847C16114FB4E2A323E5B3E4BC
-:104D70009E3B8FB7E7B3F4DECAF3597A7BF83CD693
-:104D800078BD0DD564678D34EED3634CD987FB5F56
-:104D90007171E7A7D34A227F86F92B3DA59AFEA021
-:104DA00081F4C2E9B9AB5123FAEE72713F36369AFB
-:104DB000FBCD4C8D8716429B2DFEC4228A278BBCCF
-:104DC0008C5E717FFEEFB30C9B7DDCD9F8DD10DAD1
-:104DD000F540872FEB9C4F689C7CB5743DD880CC08
-:104DE000ADB798E8530E64F338822B746CA02E8D07
-:104DF0004EB7087D87F891013FB9D2397C45E5026D
-:104E00008AEED3DF1A419F6F64F3F92D3A64EAA466
-:104E1000303FFF631528472CFF75583B0F6F374C09
-:104E2000FE38E4480FE6B761C592273758F2C44E02
-:104E30009796FC600E39734E9ECCE176FA39790272
-:104E4000F2033F75E69443BD5EAE2F2C78DC2898C4
-:104E5000418EBCE70ADBE2344EB973213EFABCE571
-:104E6000CE4BD9F9C2FEE0722788B4817C936D9D48
-:104E700023F27B0F67A63E48F2D0A3F2757B228C0B
-:104E80007E2700EB28CF3D788E9251AE574B146FA2
-:104E900010E722F9E2FB830FBBC2949FF630F03398
-:104EA000FA79130CA77D76FE7305E779D2C36BBF41
-:104EB000C6FD33C037FA5D172B872C39F161365F99
-:104EC000F739FA32399C167DA5D1337D5FC0A25FD8
-:104ED0006B5C8B8E193268C179E855D03586A32971
-:104EE0004E1D93E21807B1F2C8ACF1DEF0717B649D
-:104EF000A4FB5556BBEF587ED7B978B01ED0299F7A
-:104F0000AC87EE9BB32E4E7F73D86E754D15E513AF
-:104F1000A88CF2092225E8CF1CF6D9FD622B1F6C64
-:104F20005A493884726283B0D3AD3C322B2FEDB036
-:104F30002FD73A67B6E5A76D18E17EF69BE7F073C9
-:104F4000F1DF3FC1EFB6ADF69A8FA35C047C99E226
-:104F50007B4E9487668DFB5D81A7D73DE693BECFE0
-:104F6000707FF2C52C7BDE55A7CF70C405385E2755
-:104F7000EAB17ABA8F17E5F7AA9CE7EA23DD7F75D5
-:104F8000DEDB3B77FF559CBF377BA22F13FC2FF254
-:104F9000FC373D1C3DD8C93EBFF51CF09A3FC1F11E
-:104FA0003B057F4F0BF27B3BEF7BA26FE3F3EB18EC
-:104FB000F7AB2D3BE730B683FEFE97416A03BD6C2D
-:104FC000AAE5F45A54C9E8FBE3D35B797DC752FEE6
-:104FD0005DD3FED7F9BD8F6D51FE3D53E8D7270352
-:104FE0005E768CE7FA707F15EFB71FEF37219F567B
-:104FF00070BB2B0FA3F70A8AEB2895D36B7ABC13EF
-:10500000E0FD81A532C545F708BE083093E21CDB00
-:105010002AF93CBB2AE427C4F76816DD02F5CED98D
-:105020002B27E3FD92ED229EB26FF1CA2730AFEF3E
-:105030008340B9A0BB04DD7BED397E1BC5471E5AFA
-:105040009227AD8435EE3B9839BFA5CAAF8A7E3131
-:10505000B788278932A161B9D51479ABAD4C7C8F63
-:105060003DA661FCE999419EB7DABDFA99633351D7
-:105070001F57CA9467D63578D47B19AEBB8EE7F537
-:1050800014A90929DD7FF1FA5DDC4EAB39EA31AABA
-:1050900086B77F66F028D1DD76C0BB92E6FFC902F5
-:1050A000CE6EF427A0DF5E57CFC04C68B7775C9E0A
-:1050B000143352ED46FB39FF752F91C577E8197D02
-:1050C000C7A1D33CE541B9D989E71FD0BEBBC6CA49
-:1050D0004BEDA17B597BE74C9E8379E2DB6EE0C10F
-:1050E000D2AEF021F2937B6673BB6CAF04ED605FD0
-:1050F000F6B568D7D33DA6561E278232639CA81703
-:10510000138111AFE2DC8E525F60DECE86BE019C61
-:10511000A7A88E7FDFA2A82673FF17026EEABFCF73
-:1051200015A3F8E748FBF7AF3E8ECFCE2A7E5EC0D0
-:10513000589CE252BB85DFC5D4A891FE9DD0960055
-:10514000C7CF4E1733315EE6ABD348AFCB6183ECAC
-:10515000503FD88F188FDB26C516637E486C92C6E9
-:105160001E278C98DE7118BF9B901746FADB24250A
-:1051700042F85DE5D8381EDF3E1AD949F7AE0E80F9
-:105180001D4DE16096203DD51DCDA3FB504723D595
-:1051900083D4DF57A1BB2D8D8279F3F4A148C626B5
-:1051A0005DB6692BDA359D53641DF3363BA5FA28AD
-:1051B0008E17CBF5501CD935651EED9F6B549E9410
-:1051C000AE8F6EF473BD30342172A31FD6159A7260
-:1051D0002A17E396DB6B5FD987FBF7C8FD1EA2A3F6
-:1051E000476A07EFC679F69FBDEA7894F8929FD791
-:1051F0003D5A7BBA14ED9E5D4DA772117FC5189F75
-:10520000037D585CC1E368A801C93E537BD8CD80BB
-:10521000C7E2368D1969FAD8CBF8791EFEF92693C4
-:10522000DCA3BF67064F795A70BC252C7169809E3C
-:105230007B309E65C999E23A96280079B87FC53BD4
-:1052400031CC937B646201DDA32C12EF4972C278EA
-:105250002562BCFE375E598FED1EAD2E30505E14B8
-:105260000F0CCD4325515C759AE26C21EBFE47D4BF
-:10527000D87F2BD1A74CDFA92C0EBFF317B88E8097
-:10528000AF8FF41CB4A7B899731D8189E67D7EC0E9
-:10529000E337A5D657C70553FE18FD213FDECBEFF8
-:1052A000651767FDC35C252DDFB644C40536498309
-:1052B000B3C92E7D80DBE163599CE45C7155EC6ED3
-:1052C0009E6F1BA57C5BE7BCDBFDE7F4AB44F7A856
-:1052D000F39BC4BD12FE3B3625E2776C9C741F0A1B
-:1052E000E557755C95AAEF8B9E22FA7F5A33EECA7A
-:1052F000F4BD877D422E6C12FE9835FED85C3EBE12
-:10530000557F54E7F4F8F4CB79D757C17AFEAAADAC
-:105310006C12C63F778CE0C7AD0C70FACB1E000B49
-:1053200007F440FF6BAF79319FE56999AD4239557C
-:105330005F95F024AB041E617CF2C560FC03E16F55
-:105340007B502E7D35504970AD98CAE3069D550FB0
-:10535000D2395048E77A07F913E5BB2F149330EEA2
-:10536000BDBC86E98744BC2506F8A7BBF3324BE5F4
-:10537000F56FCF253F077885DFABC1DCA4C9E2F725
-:1053800027CAF19C68D3DD227F56467C778A7980D4
-:105390006F699E0345629CFBB8FD8FFE05F62F17D3
-:1053A000F394D77DF76BA8C78B744E1729F8FA3C96
-:1053B000045FABCC083E35F12AFAA1DB271518486B
-:1053C000370742E1B79BA0BE7C914AF1F8F21A0E72
-:1053D000C78156997E0FC85FA71DA4FB6326E88B83
-:1053E000347C1962DEA29A8484E75A462B5F17B494
-:1053F000F3A25C34C2000FD40DB1AE73F04FD208EB
-:10540000FE22CF20E6169DC3C34A1C0FE877651D18
-:10541000EFE70FF56D4139B6BC8EC30DFA9DE0295B
-:105420000A6B0751DF1785F878CB013F87A4145C1E
-:10543000D9165C7532E55F15D56807D10FCE16F029
-:10544000AD0C7378FA5F3F3520F1F10C1C2F5BC077
-:105450009B2DD64F09BB05423FC0784FB912F57856
-:105460002FE7D414661CE2B3513CCB7ABFAB15F0E6
-:1054700000F8F18B79D86E37F1132C31F6B1CC7F6F
-:105480003FC4488B5B54ECD66C75BFD83FD6C59FE4
-:10549000931F472A91D765E1D7ADACB2F763356961
-:1054A000F532BC5FC6E97DFDB5FCBCE3C0046E1FF0
-:1054B000A1DF718EBF91CEA7188F7505F1BD46FA99
-:1054C000AEA4DD3E6E716BC174940FC5030FCF9314
-:1054D000613D45F73259C9217A96CEC93F98EFDB35
-:1054E0006B12747F367B209287F2AEA4356F3A7EC2
-:1054F000FF2D7B204AF5EC815693E79F810B938724
-:10550000F97A69F394A29CE6F974AC55EB43B95669
-:105510009B0E27BC2F79B9672EF6DF7CF72BA39162
-:105520007F0B1CFD3D39DC7F287E195A0570FED3A8
-:105530006BB1BD15DFC94688F3A87C19CB621FC8C3
-:1055400063284B44FE9D252F3A27BC3329EA13F4E8
-:1055500043F9782C916EE73B4B683F5EB48F49E787
-:105560006D779ADA8D146F1A08F0785340D8AB3DF6
-:10557000CCD84FFABD86E77BF8F039E88FBE9AA306
-:10558000D3693FFB5818E9B9B8ED4FEE74797D73D4
-:10559000A054DC834E10DD6B255974BE077C4CDFB4
-:1055A000373DA0B6D2396B5F113FD73C3AE71509BA
-:1055B000F159F41CCFD3B6ECE5E93589103EEF7A0A
-:1055C000357A19F1E708F6A7656F3AD77349FD8375
-:1055D000240FC6469917CFD7FCAB55CA632D890255
-:1055E0005C55281780A40B01FE9AD87AA41B23CA05
-:1055F000EBC66A51AE82F26AB06FD70D94FFD295B6
-:105600001A776B05D8B5683F0DEEF6DC80F64A2BAD
-:10561000582306DA8BA73CF83D95EED6E9F988E7E2
-:105620006722967D999070FCA29F9A642FD6EA9A81
-:105630008E719809EEC4E8F473BA0373DEA9A6EF7D
-:1056400089CDBFB87CB291F409C222A7E991FEAA24
-:10565000A3A45F9EF08F273D64E9154B8FD088206F
-:105660005F6E117CD465243C12C92BE05D80F3167B
-:10567000942340C7FE222ECF410E733967E993BBB6
-:10568000B9DEB7E4678518E71694B7D0AFBBF689E3
-:10569000DC1B50AE0839EB0F1933F17CAE42C85712
-:1056A000A6C6249CEFC014FEBDCA80439E56B4F229
-:1056B00071BA428CE809F4D041A49B034509BA278A
-:1056C0007EA0F5A8947ECFD4D27781D624C3FD1FC7
-:1056D00057C7E5E0382157BFE337387D7AB85C3DDE
-:1056E000A7F784BCDD6A1E65E2BBB019F3B0FE5EAD
-:1056F000E8F39E8A43E4176CBBF514E1D38A8786EE
-:10570000443CB4BBEA2D7ABF3DCAEF01EC32A7CFCF
-:1057100021F823CB35CA3FAD393AA70CFD8DA6E55C
-:105720001ADA75270305D6F9977721DA93ADABC856
-:10573000FEF5897D7C28CC84DFA9919F75DFD26F2F
-:105740000F60FF10F84592818DFA3C6EA473FC9EA9
-:1057500002E23B3A489D7D35067D07C2B98EEF05D2
-:10576000F87769FDD1E4C038DA5799AEF4F86A18D1
-:10577000F99DCBC1AFC36177AB61EF0478BFBB4983
-:10578000D6D7B354FFFF15E0F96813FDFC9EC2CED7
-:10579000C5A7B7609C6FE752F19D3307FCF735F65C
-:1057A00079149A07630294C79CF17BFB55FE2CFE8B
-:1057B000FD859ABE01B4E703551CAE170306C7FB6F
-:1057C00020C7634F44263EDA3558ED457DE7B41BCC
-:1057D0001FC97E7712CF6BB1EB9B0BD58B1D727FF0
-:1057E00082BBEF3A9277DF94495E31C6E59DC4648F
-:1057F000037F57A325C0E9A94AC8EB0E57623FE6CD
-:1058000015743CEB63EB8D145D1489313B5BE58CC7
-:10581000BF9F7628A0F0FD1FBEEFDC7E10FBFEA42C
-:10582000C0C385F61FC32C684FF7C5378DB903E594
-:10583000782BF79FFB126F51DE51D1EC85E4F71CFA
-:10584000397829F9034555A6EDF735B347F05B2BB9
-:10585000723CE78D078C248FF7ADEE203F7BDF6035
-:10586000E67B3105393C2FAD0FE4257EDF64A4F9DA
-:10587000F51CCE7FFF14107437E71DFA5E469A9E22
-:105880007D59E859D2B7C52A8B2969790E1304FED0
-:105890009CFA93A971CFA53544E784BF7DE2FCE271
-:1058A000215326BC5B748EE7078857588729E890F8
-:1058B000CE377A58DC837C136BE2791E4EB827F81A
-:1058C000E58B5A5F3087FB21E7E613FEFA443F87FA
-:1058D0007B67EDFD74CF11E60B217D483FF88FD338
-:1058E000741FEA5917FD9EED8C675D098C69DD799F
-:1058F00090FFDEA2FCA297E0FCE7C3FCFBEA093FB5
-:10590000B7C77EADF3DF2BFAAA7BB0FB0B501F7A33
-:105910005661644FC6417101BD9E16F4CA9EE3F5FF
-:10592000955E5EBDF360FF321C6FD5733C0FF3CE06
-:10593000E76FBBF10B50BF6DC0457706EE7C7CBDB9
-:105940003606EAB7C7A53EACFF663AA3DFFB8CE597
-:105950006914E7FA4D60B06001E0FB83751E665C78
-:105960008671D2C182F980873BE24FCFC47E773CFB
-:105970002585916D673CFBF82BA301AE3BBF215100
-:10598000FED7578E64DBECC2D3B09469F07ECD4174
-:10599000FEBB91B7B19E99888F3B1FEFA5DF3FB447
-:1059A000F0F9C1BA4A66A4FD6ED89DDF789A7ECF21
-:1059B000F0AE6F49F4FB8A77C9FC1ED13F3FEF5D23
-:1059C000F4980FD7B75EBBD48FEBDAAC61BBDBE2E8
-:1059D0002DDFC594A63BE207B599F0FE8E0307B50F
-:1059E00095E897B95933EA9FAF1CB9C226774EEFB5
-:1059F00053C83F5893EBA1FBF5CC6786E64D18BE24
-:105A0000CF1FAC6336B8EEB0E2046A5C9B9BD6DE77
-:105A1000A573FFF72B4714DB3C961D103BC6F542E0
-:105A2000EC6FFD143FB7F66F8DF0BBADFD5B63050A
-:105A3000E2D5A1C999E0E9C6FD00787AD6E954EE2D
-:105A40005C17A272F73A83F6692FE211CA2E01772A
-:105A5000602AABC7EFF3074C9E769CD764D6E3DD94
-:105A6000B2BC08AF172C89921F32921D63957B5DE3
-:105A7000D116F4213B77F4CF52C1EED9AB45EFC636
-:105A8000C897DEF1EAAC06A8FF4D4E64630EC99BD1
-:105A9000B0817C67F9E75FCFE17277D3688DF0BDA5
-:105AA00077E9E4C714CBFFC2B8DFD2954FA03D0120
-:105AB000FDB7E710DF86E93B5D23F52F585667EB0E
-:105AC0005FB06C95D57F0FF5F79CBFFFDE65D7D82B
-:105AD000E75F7687D5FF1182DF777EF80B9AA7DA2A
-:105AE000E76F5E4DFDBFEAE6FB3B94EBA17CFA0E4F
-:105AF0006F38E122FF99D1F739D4BC4B0FD1F7931E
-:105B0000CEC599064DD4B3BEA772AB518EA5E86839
-:105B1000FA37711D7EE0AE743ACAA9CBB2F155AE28
-:105B20009967ABE7CF1E636B3F2A52667B5FB8E88D
-:105B300072075DFA74CA83655C9F9A18E70438B5EA
-:105B400031FC7B4DF5633CB4BEFB5FF452FDFE6B54
-:105B5000F8FAEE1FE3233E26DD05FB7EBF16BD32BD
-:105B6000DD3E86754918F27A468F0EE4D4A63F379B
-:105B7000647C9EA5F0DFB1CB72737DB9B974F2631A
-:105B8000B1347C6E29067A80FADB399A2DCEB3B90E
-:105B90007865A8256D9E4DC5DAA24355FCF92D68A0
-:105BA000C7EB91BFC3F9BEAA0D5D8AF6AB731E7732
-:105BB000599D6D1E4FC92A9A27E998C75DB2CA310F
-:105BC0008F67D121F15CCC730AE964A47936975DC3
-:105BD000635F4FC91D34CFAF719EDAB4F594DCE139
-:105BE00098278BAF079E8B797E73DEF5944FB5AF08
-:105BF00067EC6A9AE7DF1DF3B8C7AE76CCE3A3790A
-:105C0000F039CEC38AB81FA5B98756D2FEFFC0CBE4
-:105C1000300EA4B9A37F4D9754FEDE4B71616865C9
-:105C200062BBFF03D8CCA6FA008000000000000091
-:105C30001F8B080000000000000BE57D097854452B
-:105C4000B670DDBEF7F69274773AFB4208378010E3
-:105C500034C40E840C203A0D41061DC0E00A2ED03B
-:105C600061C99E74449C87A34E1AA28888DA286A68
-:105C700050601A04071CD0C0040810B001757006EB
-:105C800035BEE7B8CC82CD2241884983A8F866F1B9
-:105C9000AF73AA6EFADE4E079837F3FF6FDEFBE3B1
-:105CA0003753D4ADFD6C75CEA953D52427819051BF
-:105CB000841C8CA3E90842BE89715FEDB012F23DED
-:105CC000FCFD90D03F2F21C93C4D21642EE17FFE89
-:105CD000C5022924A4D6CCB273364FCD5A08694BDD
-:105CE000515A4901FDC70A9BF30A8590CE9622E3DB
-:105CF000ECDC707F6A3AD7279F0CE6B0B6DF93F0F2
-:105D000038DE7124A78E8E5F16E7C0F9A8F993F5E7
-:105D1000346F22E4583DC1B45D26338BE9F713F5A7
-:105D2000740283B5F35D88ED4E4AF49F49345D25D6
-:105D3000F8BD025DD7F20F64320087F93087AEE319
-:105D400076BE8CB9BE5842CCE179784CC405ED42A0
-:105D5000BB4CFE75027C75F531A4D1A43191107550
-:105D6000BEFD09F9D3BEC96F0B76CCF6318C24E4A5
-:105D7000CE255BDF826A1F09257DE7D1F54E6B5E7C
-:105D80002EF7A1F94E3938C369D5F4334D3E06EBF1
-:105D900036D3FFA09FE96E9AD78C7F57B93E7F0F0D
-:105DA00091C2F96C42AE72F4E7F8E0E32A7E19F092
-:105DB000753B5D533A45E13D900E836207E26B8689
-:105DC00083B555E7E379502601988F144C26B950D6
-:105DD000928CF5DC504FE939BF19B2D9554CF139E5
-:105DE000E30111E11839DFE0BE5897218FA68D5FDE
-:105DF000C9A4FFA5E73F7381BE9C78D9782A5C557A
-:105E00003AB863DAD8674F68E863BAFB86674FE849
-:105E1000E0345597BFA76EBAAEFECC0525BAF21294
-:105E20006F85AE7CF6927B75F9B9BE0774F5CB1A17
-:105E300017EACA2BFC8FEBCAAB362ED7E56B9A5606
-:105E4000EAEA7B5AD6EACA0DFB86DC44281C1B7E94
-:105E500027121385E3D7D6934F5D9304A9E404B8C2
-:105E60009FAA4F43BA3E5DAF605A0BB4370AF8673A
-:105E7000B8D94DF1E48909959278421EF68D59B250
-:105E8000640CCD1B69F9684AEDBE714BBC99842C3A
-:105E9000712848F762A3910428A90A24A19BAE4364
-:105EA000A2A63C7889F246890486F72C1783D1BFD5
-:105EB0007709A14119741DDE4F4D6483D093CFC380
-:105EC0007C49FA90B4DECB3B0CA4BC49237736382E
-:105ED0000C389F64C7B80D0E4A0FD546C6EFD5DB08
-:105EE000D2C7113BE40383EAAC1719AF894E2615DC
-:105EF000FA61FC52E1EF13E65FC4DF001DDF0F8E95
-:105F000073AF77D0F13AF68BD3601E247030EB96E6
-:105F1000A130BE6B037C272DB49374CADFF5AE6746
-:105F20004F5C41C827F51331FD7D7DF1B3276442F5
-:105F3000FE583F0DF347EADD9806EBCB313D565F47
-:105F400087E527EA1760FE64BD17D353F54B303D54
-:105F50005DEFC3F28EFA46CC77D6FB3155F980CA95
-:105F6000A399C5C0A7C5C506E0D37916C2FF58FEE0
-:105F70001C5F8348FFDD867CED4C03BE3E67FD66FB
-:105F80005006A5B7739F5062CAEE1D4E9174D73B61
-:105F9000FE5C06C05FA99F124F62CF724B0CC38F8D
-:105FA000C54026122A7F1EBFC248243A7ECC1B570A
-:105FB000AD13B3F1BB04A443370EE7545B94FE0763
-:105FC00012C4D7A5F0A4D63FF9E29F0B67E5027E85
-:105FD000FA239DC41C14EB18DE5E7602DE2E053F0C
-:105FE00089F357241C8537FE9415A4F5BF4C56E160
-:105FF000D99645687A8BA3F814D0C1B96613AEEB75
-:106000005C6BAC9F401F8E24A48BDEE1C6E651B5CD
-:10601000D1E2D3CA879AA6789F5E5EA4FBB4F2E26F
-:10602000DCA197EDC0F7F3D244DF89E1401F2E4E8B
-:106030001F8CEED4FE6B9AB27D565D3FFAFC399F01
-:1060400030B109E5BC1277EBD0DEE7392FCD88E31C
-:106050009CDE38200EC63D5D6FF6C1381DF50E1F63
-:106060001B37CDA7A5CBEA05B1BE1389E1F9F5D65B
-:10607000EF3F7B7E843493E36682A0FF7E40EFF5A2
-:106080007BC58774DE580CF4D12A7F03FB4E4C8EFF
-:10609000BAEF489857FBF534895ED3D5F07DB36EDF
-:1060A0003CDA4E39A9E2A9FFC5F02E9193EA3AA94C
-:1060B0009C1C4A6537D0292566C4B39BF61847FB5C
-:1060C000EB92AC4B043A8E295EC1720F0C44E9A9E5
-:1060D000C61C34BA1504771BE859B346AA7CAFDC5A
-:1060E000F1074A725FFC56264BA1FC2FB4775A2E5B
-:1060F000F3D239A4D84EE878B39AAB26819CFC62DF
-:10610000C78FB99EE22B84757F490C13814FBE2443
-:10611000FF6E1FAED1CBA6C41BD9FC96B0FDD94BE8
-:10612000FF83F5513D4DB75F9735EAF3A5E4E614DB
-:10613000E087D21532F1D3B957C07EAFAE9BF2FDE6
-:1061400075F14C8F2B23758B414F592A936980EF42
-:10615000590E22F5A172A266E7EAC2129ABF2DDE9D
-:106160008074759AEA770A954315094C8FA94CF209
-:106170001B5DB4FC78F3F0DBAF21D0DEBF18E49AEE
-:10618000D7469C1B484FB8CF5EA29FDFA5E61F39BC
-:106190005F4216E17CD579A8FDAAF310370A2E7F5D
-:1061A000147D7676BC10D693697A5FBC5E7F5D0005
-:1061B000798D7EFB70447E51445EA51399D3892965
-:1061C000DEBD203E19E8223401F53442E923375C74
-:1061D000CF18AEF7F0C5EA99A09E88F5165DAC9E83
-:1061E00025DCDF63D1EAD5ECDCB2C34BE9A9F2F5DB
-:1061F000E7EC84CAF32F245F8A937EAFDEF0A81DFC
-:10620000E0744AF2DA01DF5FF8C589D1E0B5AF1B6F
-:106210005E2EAB007604923685FBAB4F4C013DE918
-:106220009B0DB243A4553C1B4D0113A5DFDAE68A52
-:1062300049240FF34759FEB1B322E45BF4F8ACFCF8
-:10624000C573298A0DF1C0F46D1240BDA376FDE738
-:1062500013408E7B4808E930B21D8C7F2101F9BEC6
-:10626000C418D7B39CCE13F5640FE7334FF313670D
-:10627000453BA437B4039F7922E8A8BC7B7F091A69
-:106280008BE97C5E8FB7259DBC8A667F407E00F2DD
-:1062900040850BF133BDA261D30B7947E9BC3AD6F7
-:1062A000FFD62EE46AE508A3C7734DB37FBE5BE952
-:1062B0005DDE7472BB28DCCE8FED9416A607915676
-:1062C0009656CB013BE89DD56B6527A55452BDE59D
-:1062D000E5575E047BED5313DA6B555BDEFA6834E9
-:1062E000CD576D959326B1E5588594307E3CF47F6B
-:1062F0000B8685F151F9ABB78CCA50F6FDA18430FD
-:106300005EAAB6EE3792A13DE158D4B4DF18B44688
-:10631000C14FD3D109A0B7346CFAD608F6D717FB12
-:1063200004929ADDB37DF9DAB7705F0438213E3903
-:10633000BEBAF1D7036F8129BB0BB09E03E4E5A57C
-:10634000F0E6E372BA66A78DC4D37994FFDEE49FCA
-:1063500004F87CED3E3BACA75DAA6374BEFAD11491
-:10636000171DBF5CF6A6383065DFCBD7DC8FF4573E
-:1063700026D4A538909F5CE90694DDDE7458E7DCEE
-:1063800055B7E13A4B891BE9B07CB558ECA7E9D782
-:106390001299B8350A9F1426303E695F47914BD752
-:1063A000D90E7A3FE8DBFF2EFA37A07D7A2F01F96C
-:1063B0007F3F5F33DD2931FFB599E1CB9A6050ED26
-:1063C00045B38E7ED73FD606783ADDD7950AF3A43B
-:1063D00070F072B809DFD37EC50FAE4F6578228AA0
-:1063E00054C8DBD1FDA008BE43FD36D965C9D3B57D
-:1063F000E3F2938D3F9F8F4FE71D03FB5B7B0AD535
-:10640000EFA3AC6F16AC0FF745BACF69E84CC3EFFA
-:106410008CFFD73FCEF85DE57FFFD489507EFE43E9
-:10642000C647D00EF6133AAF402A96EFBF5540F953
-:10643000602281687CBE5EE67CAE2FF7507E053F11
-:10644000814A2774FE9210A7A5173A4E02E201ED89
-:1064500095D215B4BD56BF8171B19E31FC5DB3AF0D
-:106460009471B9909F40E5416C581E9055C997A50D
-:106470004756CBC40B2A67F5A726B4C7ABB7C8C528
-:10648000B0FE339B0F7E7427A5F3334D2ADFEAE578
-:106490006A24DF966FDB20009D46F2ED9972BA8B7D
-:1064A00047E35BFA3D2ADF9607FF9FCA55157ED367
-:1064B00013F4F294CAC77EA042F406C748F9F8352F
-:1064C000E85BC93DE523FDFB9014F6A44395FE541B
-:1064D000BAA31A5C3F90EBDDF4A9D25F377DAAF432
-:1064E00017B95E3DFC22CBFB838D44E9A47817D518
-:1064F000E8283EAB5B05BF09F9DCFB769F0284937D
-:106500000BB737E27BBB4F9236EF8FC83745D47756
-:1065100045E48B23EABB23F275BAFAD52D078D0427
-:10652000F11FD0D5332D78891C8F620FAAFB8FA75E
-:10653000F9ACD10B7491193282DC931751D50DFC53
-:106540006B7B45F4AF7529217B02FDFEA885D969D7
-:106550005D0E9E8F67F950B27131C83DF57BC84220
-:10656000D03EEF2A0ED9E335F6FFD156D1AED0F2A8
-:10657000A09F4CD4FA11C2F369407C07496FE5CC67
-:106580006FD81563CFC3F162B2FC407FD78BD6AC16
-:106590000560EFF94427251F3267E11D7642E9AC1B
-:1065A000AB75C04DD3E8F7B9EF88A06E53F4B8A42B
-:1065B000744A37B3391D9F22DEE7C7D0F5CD6E652B
-:1065C0007AF89C65D1E9BE92D72FB5CE37827CA5EB
-:1065D0007AF431AD5FB4922C43BA2B5F15F1BDF55F
-:1065E000C7C81F9511FCE1E6F6C35E953FF2493E30
-:1065F000CA174298FDCBE5F2F562EE4DD3281EBADC
-:106600000E89C4A4803D2B92C5B0CECD821FFC055F
-:10661000C49B8C7C564B42280F553875001F0DEEDD
-:106620005D4E756CFF53E183402F3BFE90F7124D9A
-:106630003B767C3A680FE4777E9CF507D2B37ED137
-:10664000BEEF66C07ED6B5CF847EB1AE7DBFCE7ABA
-:1066500010F2BB4DE817EB5A6472011F78F7D9FCB2
-:106660005740795F663F34ECFD362F88FBEB23887B
-:10667000B75309CC7E39D7FAE7234212A47455A048
-:106680003FEC8B453EF2ECB6A0BDDEB5F7DB42B782
-:10669000F59FB79E5A2371233DDAC8B46D40BFF110
-:1066A000CC7FECD933EAE58574FC9AE6FDC6D9B413
-:1066B000BCE88DBFE681FCECDAC6F4A24E39B886A0
-:1066C0003809F92AA1EC7119FC7CC04C19843C9D55
-:1066D000B8F1066F6E34B83038745138C0BA285CDF
-:1066E000CA41EEF7068F984423D2FBBF1E3CCECEA4
-:1066F0006072ED0704FC4261B8082EF6DDE6370B48
-:10670000B87EF67DDFB7792077CE342D447DE55213
-:10671000EB1E92F8AF4A07FFD5750B81CB59F7C432
-:106720007F597C33FA7F2F41C17946F2414F3ADFDE
-:10673000F913CCBF6673E27C2F93FFCBFFB7E17DEB
-:106740001BC5BBFDD2787FEC7F2CDEDFE178B7394B
-:106750004C20CFF6FE15FDACEAFA2FB5EE57FE87BA
-:10676000AE5BD5E36F34D41D9E4AEB1F268115C561
-:10677000749E6F665EFFE1545AFAEB5EF4938F12DB
-:10678000991DF86B503EC0FE4B13FC1BD0AE6076DB
-:10679000531161FB7A514E19EA1B45394FA0DE4077
-:1067A000A4BAC3F9141E3766CD752EC5EAC33E716F
-:1067B000D3FC8FD2AF75A2FF30C27E3C2810974029
-:1067C000F5D8A22B6F380476CCF84C3960CAC3F4E4
-:1067D00028A46FDB27B2EF56BDDD3409EC1D8D1DFB
-:1067E0007883A22F9FC0FB9B48E61D9E4AC79F98B7
-:1067F000293AFCD06EAC4F82F54CA2CCEDD39C1F55
-:106800004D88E86F1BD531B5FEB5BF177EE624660F
-:1068100067FE9A8E9F0FF0CB94D17F7849F801BC28
-:10682000115EF9FEA5A05B494E84DF8D19351C9ED3
-:10683000CCAE96787BC9BAB80DF85622D42E667ABB
-:1068400019DAD3AA5DDC1B9C09B7B3253EA40A77ED
-:106850002993DAD9FAFE101E2A3EFE5E3CA8F8FB08
-:1068600047F1F17BC0C788303E32CF3B24E0CF22D6
-:106870006E0F8C3FDF26623ED329E1F90BB707C6C6
-:106880005AE325B007AE953E10812FCBCCBB2AE151
-:106890001CC1EC1490AE077718D0DE31170808F74A
-:1068A0009C4609F31F181C2340D19E72CDCE330F96
-:1068B00010F027BB8C4CF12E66FEFCBF7CFFFD98D0
-:1068C00042F0ABB0BF32FABFC914BE735691400C50
-:1068D0005DE75C897821C4612E5DD4319D3F589F6E
-:1068E00087BFEB52C2FD5CAA7E6F72E49F9DEEA44F
-:1068F00072EBD81584EC829439FB25ADDDFC835610
-:10690000062FCF61E2EF8F72C125166BCED9FE2D17
-:1069100089C98F9D7FDC361CFC6763BB72E3983CA2
-:106920002D30005D7AB85D708E287110AF70AE7535
-:10693000401C9E231E126DEE287E9B4DDC9EFE6544
-:106940003D3A9549D77AE213C16E2221F4DF7AD716
-:106950009BA39E07CF4A3270BAE178A37F62219C45
-:106960005BB0F1E7D2A6715ABC754CFA42CAEB890A
-:1069700007F83BA6395FF947E10BF63BC077932553
-:1069800038A1388AFC98CFE137E5C077E8EFBCB290
-:1069900075AD01E8F7CAF506DDF9647512B7BB8677
-:1069A000916130AF29072CB602C0CB21D169A1EB90
-:1069B000F3B49E35BAA39C7345C213FA073FFAABF2
-:1069C00049EC5C608FDC341BE0BAE74B33F152FCDE
-:1069D000EE32FAAAA2CD332985C9B9B9A4E9BEBC61
-:1069E000EC7F3DF88EEDB206C6819DB99E70BF4624
-:1069F00024FD11A4E3731B891FF653B04B412E9C59
-:106A0000DB4C703FA7207912EC6ACAEF3FD4FA69D9
-:106A100006B76CFD25E801B5AD82C340CB6BA5A0E0
-:106A200011FCB19E967811F6DD7C85B8F07C587229
-:106A30000CBD55C317AF264908DF83A3F7DC05E378
-:106A40007ED56124A08FB8DE0CD961DFFEAA75382F
-:106A5000F2416FEBFA553DA91C2F433F4C1E46D225
-:106A600043EEE6185DFE1AD19D01FC35C5149CEF7E
-:106A70008C82BF49C98CCE2E5BBEF9FF3F936F1F3E
-:106A8000AAF2CD2D166BF8282999D1BD46BEA54690
-:106A9000936FF3042515E03E6FEF8054C0EBBC7795
-:106AA000E4E468F26D4B3D3BFF7B9DF223A45DCD9A
-:106AB00054BE5DAD916FCD54BE65F76CF7B7CB9505
-:106AC0006FFEFF1EFEDB02F22DCA7AE339FC54F999
-:106AD00096D77A14E55B5EB381281ABF9339F952D1
-:106AE000F24D48BE15F4E143B233360AFD6CE1FACB
-:106AF000F7EB3C6E0FC60139F7A364765E7AB97284
-:106B00002E3D85F1C925E5DC7F139C5539376F3B58
-:106B10009573D9D1E890C9B979BBA89C13801E9907
-:106B20009C9BB79730FF5B847CCBE921DF08D6AF15
-:106B30000DB0F69E96EC17EEA6FD0D73C94E33AD63
-:106B40003F2C2CEF4668E5DD8F922584730F797713
-:106B5000E8F2E4DD762EEFA81CEB0FF235923E9CB6
-:106B6000AD31BAFC9E51ED9B7F05FCF2AE88E78B00
-:106B70001F18D839D07BA3DA0B80BE56F2F97838CB
-:106B8000FD75D67BB1FFA237D9FA6A3633FF776D30
-:106B900033D30F6BD78B7E85FE73C2E8EF8C30FF4B
-:106BA0008ABD0249A5F9A926DFF35690C1BF900915
-:106BB0003B172393F235F430676415FAF11B2CF67A
-:106BC0007584F2F11C8998C15F5F659DF005F8E955
-:106BD000AB4632FF7E15FF4E78DC801A0759DA7219
-:106BE000EFDB7D48CFF881292686C7292F0BFEB51C
-:106BF000D910BFA42FAF8A887F7C8AAF73AA1844AC
-:106C0000B890F7C5A8710C4F45C2E31087075DBF68
-:106C10000E1E7E212A3C284627E5A784D75FF16E09
-:106C20007031F8F32B560A78EEABC223729D2A7CA2
-:106C300054FF74156FEF69BD17CFFD23D7AFC2AFF7
-:106C4000C7BA557846ACDF97CCCFBDF2C97088A7DC
-:106C5000A1F480F2C3FB1B0A073A4EF1D82B52B5C0
-:106C6000F2F8790E87E1BEB145E904E046EA807E9C
-:106C70004A1BEF7D3B9DAE7FC427CA30D826AF1993
-:106C80006D72C339EA264B08E59B4A5FED2ABDF3D6
-:106C90007EF664D48D437BBD4570807EE10958103B
-:106CA0008E1E4A67165AE5E0CA6F2670383A4CC8FD
-:106CB000577CDFA17037D0FA13D47D88C21DF866E7
-:106CC00078EB593CCF2D20213C2FA96D149C01BAA3
-:106CD0008EDA16062F55DED23FAB161F51E8518AC9
-:106CE000468F049CC485E17DB08AD79B62F27D0407
-:106CF000E7305328BDAF25613CE6D0FF008F917887
-:106D000052E17929FAFC9CEB1F5B008E5680578874
-:106D1000E95101BA2FD8C2E51EC9AB8363D18B17E5
-:106D2000187DED1514384FE88613D02B2D1FD1CACE
-:106D3000E815E0A600DC5B4B44C89752F82666F7DE
-:106D40005C279C5F6AF9B762EF51D6FF6AC149A21E
-:106D5000D0AFBAEEDEE8F71FA5DBF608BA7DCF129A
-:106D60003A3C1CE876AFC0FC08ADF1BA7347530A51
-:106D70003B77DF64A1F40DE75DEFC8CE754A4F3E67
-:106D8000BFC0E109FABFA2F14B0D8105C059E04631
-:106D900033C69FE13CFA33FD522B5FB75848F2AD42
-:106DA00005BDF76FE4F6406FFA8D9A1F0AE381DCA8
-:106DB0006BA1E3E584C78B94EFAABD7FA97525A6D7
-:106DC000FC63EBEA8EDF246D78FE648A773F98845B
-:106DD000FE1F169F743B8F4FA233403D4B532F2D08
-:106DE0007944EFF5489A19F7E1FB785CFCF5A29538
-:106DF00078E93ABE72C948A77497FEDD1890CBE3D4
-:106E0000E83E4293AF0E8FF8F86E2C17F13CEAA6DD
-:106E100077136BE09CEE261046F4FB4DF902EEBFB3
-:106E20001F4067A3408F3513978993302D1FF98337
-:106E300078F41BE5AFF71529949F866DF43740EA87
-:106E40002C0A25BD07F01B2B12805F9B2BB108F687
-:106E5000AFFB3E27F9A282FB2CF633EC1049867A71
-:106E6000A35DC9680E8C6A5E5104FED1A907AD56B8
-:106E7000A0F39C5506E2D6D0EF68E26F8073F8511C
-:106E8000275CB700FF95537D01FCCEE5AD6B1BEC95
-:106E9000905F253815DABFC7EB9E60A7F3DAD2788A
-:106EA00076C255C087B41E74E359C5EA79D60B4E35
-:106EB00008952D6D5D8EF138A5EB05E280FA7E8197
-:106EC0009859BF7E33ED77CB2ADA9EE6CBA03DF40E
-:106ED000BBFEEC87B7009F1F1659FBCDECDCBA94C4
-:106EE000B653805ED7DF8BFD55AC12481AEDAF7CF0
-:106EF0003393FFE58765279437EF5F89FBD8243A02
-:106F00005E7A36C8FBC078C893E18203FD9D99770D
-:106F1000225F7771BE261DD398DC10789EDB0DAA08
-:106F2000DE742085C507973A171A13693FEF8D4C19
-:106F3000CE8630014FCB593C8F3E41E1ECA670FE2E
-:106F400080C7731C1C79DC18D4EC3F9FA50C403A19
-:106F50009CD33216E31CE692628C7398328AE96BFA
-:106F6000EF5F6BF10B745EEFCBA14CF87EF05A1320
-:106F7000EABF9D5B643C2FEEEC1B44FF74FB2A9937
-:106F800040BC46C32A11E562FB66B68F8BAB6F9B94
-:106F9000900EF0DB2038416E1E5C5564847DADDDC3
-:106FA0002F60FBA2D5F7A7303B86C943D56E2B7562
-:106FB00054E8F68F48F9A6CABF1A0E87483957A376
-:106FC000EE331172AE06CE9BED90EABF7B8895C979
-:106FD0003FD0FB01EF81EF907E6B0FCB04F47EE19D
-:106FE00078C7048CDB827D93968F6A155C70CE5FC8
-:106FF000FE89C98FFAAABF64E64F417E7F6A22826A
-:107000000271F014EE542E8C3485FEF82CFDFEC572
-:1070100007668890A17452827056E3450B36B0F82B
-:1070200096820F56A494021CC627A29C2D6B14892D
-:107030005B232FBE105CB7DCC9E4B16383461E1529
-:10704000187DA5B07F3952991C5436C8103342B60A
-:1070500073F944F56917E80D15BB96A71869BDC506
-:107060003C1EA462EFF2142A1A4803EC5BB47E853E
-:1070700091F55FB14F70ACD5F4AFB657FB53FB3110
-:10708000EED2F733602FCF5F663FEA3CD4F17BD37B
-:10709000C747FEC7851502ED6FE4FB2206298F3C2A
-:1070A0003E6980F6BC434D55FF6BE18706E2D2C0D6
-:1070B0006DE41F63884B4317CD23287F53BC4D6E6F
-:1070C00061FA50F388A3C69A02CC3B809F6BB99FAC
-:1070D000B6763C3BB76ACEFFE011E0EF490502D23D
-:1070E00001F1BA8D8949A8072970BE5056C0DA97B8
-:1070F000D1F6C077CD2B191F5279A080BCA85DB501
-:107100007C02D65F2F28D07FF3DA12DCE7CB478AE8
-:1071100004CBD71F45BDA3BCE56812F02BE5CF1506
-:10712000B0EFD68E3139803F54BE53F9F87D99C502
-:107130008710B36328DC03284B51A2F2AF78983054
-:107140003B75B38C7CE719C9F8F2FD2D22F2F3C12F
-:107150006BEF98007CD8B941E8858F299F1684F998
-:10716000545CCDE275CA36317BE5E02A261FDA9BF6
-:10717000999E58B45A9E0CF9B27765C2FC5E4C1FBA
-:10718000BC5C7EEEA1A76C8CCECFBDF1EF14B9E94B
-:10719000A3FBE8FC6E7A8DCE5F09C3ABE8BA07ECBF
-:1071A000E8A7BF6E3AAE579543A5128B679AE35B8B
-:1071B000C8E27D2516F7F677CF2B621E8FA5D8C2C1
-:1071C0007244047A8F6771D2EB65A4F7487EFC475E
-:1071D000F9E89FC5D7DB391DA9F311F7B2F61057AF
-:1071E00016A070FCF5E69731AEF5CB578F4E013CFB
-:1071F00057EDA1F44BD7DBB9D9460220B7243FEEB7
-:107200003795CD22C68F132950788B4DCB9F2C3EBE
-:10721000A9EA751BD24DE53616775AB9E3781EC632
-:107220008B2C0A61DC95F755AE6F7A837940DF9538
-:10723000128B938AE4F7B1A94CFFECD8153B0DD61D
-:10724000216CDC8FE7AD954D77C8407FDDF223558B
-:1072500056EBE139A697D22F9CB3C3FCA60ED5CE30
-:107260006F21E2A96313E3FFCA16D96F81F96D5C40
-:107270008BFE6CCFC6B3181F5FF4FA16F423785A4E
-:10728000447D5CE44611CFB3688AE75691F189B535
-:10729000CD3578EE56DBC4E3FF22E2E2AA5EDFBB27
-:1072A000C34B4153F5AB5FD8411E9C6EDB60077842
-:1072B000D2FE30AEF0BAF3922E3EAAF77860973E37
-:1072C000DEB0E9711E6F38B99DE4F58C373C0DFFD7
-:1072D00080FD2635225E7363228FEF0E141647F170
-:1072E000E777DFFBD9F2F51A8893EFD876660DCCF5
-:1072F000BFFA6F5FAD81F826B2CF82FB94E7D5DF8E
-:10730000615CB1DA6E612AA3B7CE4DBFC0B8ECCED6
-:107310004F4D68EF74EE6DCF82F8B6CEADDFA5802D
-:107320007F6EFEDEEBD17F397F7B512A8922EFD53C
-:1073300014E8D37F1971E191F838D87C10E3B0BE1E
-:10734000FCC484F2AD3B7EB4A986C5E52A3C6E74CC
-:1073500073F4387C35CEB1B6F9969BAE0579DDCCA9
-:10736000F4BBEEB8C74BC58B7E48F17AF565E06F8C
-:10737000338F0B6E9A1C355EF44BF807C5D3CF5391
-:10738000F5F1A25F37CFFDF98B50D69CD86BBC6866
-:10739000E032E0A6C6F957A7BA5E4D053EDA16EB15
-:1073A0004D6378F34F12400FFC3A0BEE479C92432B
-:1073B000180712DA6B7240DC63E5DE8F915F3AB733
-:1073C0007F80FE56C2E3EC3B49F71F8B8716F83AE5
-:1073D000D7DB589C29873FC4A12A76FCCEE34D1900
-:1073E0001DAB71A8BDC59F0653F9FD617EEFA08658
-:1073F000DA4D2C4E3D1C972A8C047C1DD5C5F5AA70
-:10740000EB8EECCFC1E56838AE3A7A9CAF1A47D81C
-:10741000135F6C5F51E3A63BD7F2786BFA3D7318AC
-:10742000C4C9B1FDDCE3173E8E865F35AEFA0F119D
-:10743000F855D7D71B5FA8FC79A979FF57E1F26E01
-:107440002AF367ABF0E9F84B7439FD0DE7776AB7BB
-:107450007E9DAAB16F6772BB55859B3ADFC54D4CC7
-:10746000AFE8D8C8EC8748FEA6EB71458BB397D23E
-:1074700098FE5BDBB23F0FE450C7815D9CEE185D68
-:10748000D76E3ECAE274A9DCF66BE536617EE4C8CD
-:10749000FEECBC3F4F6BF4FE3C9BCF46EDEFB4E4FB
-:1074A000BA03E67FBA8DE951A79BC489FE28FD5F28
-:1074B000E0FB52F7BA6D468C9712ED31A84FCDB76D
-:1074C0008DFC242E095223C6FD342CE471420F3B5F
-:1074D000D300CE0DB61B09CCE751808FC6FF203BF1
-:1074E000DC04F43839ADB84054C2F355CB8D4906AD
-:1074F000E2D7E25F0A64827C3F92DF2E437F9F45A2
-:10750000F84D3E93C8E2543AAFCFBC8273A1D2BBD0
-:10751000DEADE6DD0F893A3F47AD297404F477F21A
-:107520008605FDD6E23E8B17FD666B2CB8CE83DB5D
-:10753000BF7D05E0D5F9731361E7089430A85C2896
-:10754000E3FE8BF6EDDFAEF933E899D0988E5FB6A7
-:1075500086D607FD7A732CDA035DDBE2F2509F7C5E
-:10756000E3C1292037CA600F033DEFF5547F03EDD7
-:10757000EF6432CB9FDCD217EF13546DB361BCE1E3
-:10758000C1ED3B6B41FE77BE1E0BC7D1E44B39F812
-:1075900037C87BF6C491B50AEA818A76BFAD2092DE
-:1075A000A2D5F3AA20AF8B7F2168A7A33F8ED27309
-:1075B000554B1CDE1FD1D4E3FCECCD60F7650219FE
-:1075C000C077549FD48DA396DF9AD69FDFEF0DFD31
-:1075D00084BDAFC0EA7B8CA15296F76530BE6DC307
-:1075E000FA252ABDF2F29EFDB2FA33D3FAEBEAA9EC
-:1075F000ED6B4DA42E1A1F54A709FC7EEF5F0747C1
-:107600007BCF22CAFCF1FBFD02F11A400FD86AC100
-:1076100038AE6A636010C4B7EF30B2F3916A7B6032
-:1076200010C4B7EFE1F2AF3A86E6E9F70C3E0FA8D7
-:107630000F79620EBE06F8AED969214BC17E7FC3B9
-:10764000E6023CD7ECF8F6E44B0510CF168B7EAB88
-:107650009A37FE0DF15F630ACC00FA0F6D35917514
-:10766000B47EC7D677B2408FE8900359091739F72F
-:10767000A96932E9CEB1D5759CAEF70F84FBEBEA70
-:10768000BDC5CA5EE4C5DE34A68F2E4F733D9D8610
-:107690007C6D75A0BC86FE44E8A76580F65E73A588
-:1076A000125D8EAD4A9375F768C5F03DC555D0EFB4
-:1076B0009724B83883A2A44608E1F979E5C6B34314
-:1076C000C11EFEEC6757E1B9D667C6D05090DB9F6C
-:1076D0006585866AE5F1A97AB322C9E897C0B46BDB
-:1076E000EDD9D20C02F1839669D1E4D396B4589CBB
-:1076F00047E543B151EF83EEE6F4B61A6830998D51
-:107700000B7E0875DCCF8C7E23CC23375DC1F2CA9B
-:107710004CBF11BE576DDC3540F7EE84E4C37A945C
-:10772000BF101E156485B1C0DA53AE542CB02A12B6
-:10773000DE8F96FEB39BDEC4309ED0C909716A1CF1
-:10774000877467423FA87A1F40928BCD002F232970
-:10775000764822A0DA877C1A439A30B5527584EDB8
-:10776000437504E28A4EF1F35B93A43C0DF2C374BB
-:107770004844797E29B8FD3ACD8EF3364975C489DF
-:107780007AC72407E8D582D74DBEA7F4D050BF7181
-:10779000C00976FEEF8278380C8DA3F3B33BDEFE92
-:1077A0000EF4034A6768677BAF23FE063A9E646463
-:1077B00079328EF8A39DC777703C10EF7E943F56C8
-:1077C00012FE0BD17C2C4A283A6EDCDF46829D6B80
-:1077D000759000E84DB1561288A5A935573AADE528
-:1077E0005F3B61F9FE949C41AE39C6E8CB23E99A30
-:1077F00038A5F3DD7251C4F6E723DA9FBF587B1535
-:107800001E1EF3806C76FF9DC12586AFC13BCE79ED
-:107810002108F0C8B33B1B008FC6D09107011E7929
-:10782000566627263512AD1D37209DC9AB4704B6D5
-:107830005FD2BF62ABA63FE230A3FFF4710EF7EE5A
-:10784000FAAA5FA5477D8B0470ED51DFD25BFD98EE
-:10785000E8F56DBDCD2736FA7CE27BE9DF1BBD7E06
-:10786000ED1B1FBF1750E023931B1231A8F7A00791
-:10787000A483BD157724A58451053B2788C05B0CE4
-:10788000D01FA58798819AEFF07FB91AFCF58F82F7
-:107890007F1240BA2BE1F3A1796B3A9DDF9D7CBA50
-:1078A000E3D7B373CCBBE7333FD29D0FB1FB424765
-:1078B0007FC6EEEDDFDDC8ECEDBB17B0733352CE03
-:1078C000EE0139E87F30DE3DD009C5F73D3EC11FEE
-:1078D000C886777022F4D7EEF776EE97A07E4984BB
-:1078E0003F46A527F5DED26CAE5F6773FA9C4B422C
-:1078F00036E0FBC87BF4CD692C2E8D9A632E58DFC1
-:107900005D7C7DEA3EE05D4E72E05D00D110E38477
-:10791000F31191DF5B257623BBB77A6B824EFE9C19
-:10792000CB51E260BF236FF2EFFC3DA2793728A96B
-:10793000DA7B5ED285587C7FA44176A6815C942F49
-:10794000FC9828942F8C17061045730F8DEA77C882
-:10795000ECB283A01F4772149332D00BE3399D25FC
-:10796000DDD8AD87BD4FE1326FB982F760EF486770
-:10797000FBCBD28CE2B94017A27DA4D36DED895721
-:10798000EF76B6BE06585F76CF7937189D4ED44352
-:107990006FA41A04FA7B9C66988F68523E56803F0B
-:1079A0007F2B13B0FF7BC281E1F35C52821FE25F49
-:1079B000E6D8971E01BA5D56EFC073B425F5399825
-:1079C0002EAD4F433D7471BD1353152E66A7CF25C1
-:1079D00052389B07B2FECC0E37D333E83E04F11782
-:1079E00092A32E007973661D01FDD7D20D1F1FC211
-:1079F000C7D89D7763DE04799ACA8D9310BEB43DD3
-:107A000029033F6A867B19C0C7A25C49140D5D98A3
-:107A1000D286E9F23DE0A6D2C71606BF2705461F6B
-:107A200091F07B526E53E0FCF9C91BBADFB541F807
-:107A300051759FC1EF37EC7CAE57F83912509F9DBE
-:107A400053B8784603FDF4043F877CAC7E24C2EB38
-:107A50007188EB1A0CF6810B5311E047E9C894EBDF
-:107A600025226D6F52D89C4DD66297A180D12EC031
-:107A70004FB432789AD2EAF03CCE6C65F012AD5E2B
-:107A8000848B6C65F012AD8CDE8C3C2F01FC866320
-:107A90007BFC4EE1D79C3E02F0305A072F63D2B8F0
-:107AA000CB83DF4A0A3F3A8F24CE5F917048827BB6
-:107AB0000AB961BEEA4DAF7B8EAE1FF6F117287C86
-:107AC000204DEEC57E4CCE607234C950B75F06784B
-:107AD0002410BEBF7849662161A18AF097E6250A85
-:107AE000E405360FB25E8F57D12145BCFBA6BC0022
-:107AF00074B0E21DD900E7A4E2821FEBEE938AD3B3
-:107B00005CF10AC2D32DC0FEFC44BD82F85B0E7846
-:107B10001C0CFB23B3C71EE5F87C0CF804F1CBF872
-:107B2000E349CE2F4F733E6970B2FB13CB26B2B838
-:107B3000ACA47C037F0F2D40B4714FF1CE2662A41C
-:107B4000F3421D5BC134807AC62726FF15B45D6CF5
-:107B50002E71019DC47FF2801FD74A8AD3412F8A9C
-:107B6000E7FA2F19A3C44FC78BB40189D921541444
-:107B7000A25DD36688F60E5683F38019FCA6BDCDB0
-:107B800067FFD41D4897A5576378304974174F9FF6
-:107B90004BF3D6C658F40FC63ADD858F029F37DA0D
-:107BA000904EAD74FE651ABCC7F682D717336E309F
-:107BB00064503A144169A3F87DA6718005E0FC9CED
-:107BC0005C9C0EF2F539BECF521C28DA73A80E2E3B
-:107BD00027ED0557EAECD915B20BDB39C6E8E5C04D
-:107BE0000A2E7713C6EBE95D95BB1F75CB5D773227
-:107BF000CC27E5C278E4C7A49BA3CBDF06D9E885F0
-:107C000077051A86327EF79618D97D989EF200FD88
-:107C1000DAE7DC83D6813C55E96B1161F2C74B6230
-:107C20009CB81FF1777454FD7809BC37C8E52CA4C3
-:107C3000E24023D24DCADD068CCF5BC6DFCB7A8A09
-:107C4000D217A43E4A5F905E9BC1CE33169987E15E
-:107C5000BB6D0D5603CA0BE95393DF0AFAEAFE51D6
-:107C60000EF02348B2B3CD05FE409BD4B48E40BD88
-:107C70000233BC2721C41738800EBEB1CDE977B1DD
-:107C8000383C8A4E01E8C891544C8EE5E2E901DEA9
-:107C90007B911D3713F02BBE90546701B8E5663019
-:107CA000BBABB1A410E148E13B2E2339DC4FEAB471
-:107CB0001BBBDFDB826E5FE8E5FECC940CAE476752
-:107CC0007AC9400DBF370A5C0F53BC2447C3F78BFA
-:107CD000AE9840E05CA927BFF722CF363079F6880E
-:107CE000105D9EA9FAA72ACFE40839A1A68BFB4D07
-:107CF000D4DDEF322639817621F51A288A24EFD592
-:107D00004FDE158F70980D7020693776DBB53FEC2C
-:107D10000F7A6561547A8B946373BAF775570AE0EA
-:107D2000E994ACA44E077A7AA7B77DDD558A74E84A
-:107D3000EBA3C0BEB4FF991FA35FE7C4333605E4CD
-:107D400050D985C7717F28BD300AD3F2C61B703F5A
-:107D5000179E9D5C08F4D0BEEAFABC4FC1CFE3B3D6
-:107D6000E1BEDDDE583408CF237DB10AC477B437D5
-:107D7000D2F2827039C48B8B9A780102DE77CDFD06
-:107D80006F52A0A05EAABE7B46ED3AFB68F00BAD39
-:107D900016F15E58E9B33617E89FBDD15FE9AAE84E
-:107DA000FE00D86BC1EF4A07CC013D7ABF7D742835
-:107DB00040FB9DB38E9D2334185D2703A0373D63A0
-:107DC000C173C88684E8EF82CCCDB87E19C881B96A
-:107DD00019AEE7104F56F64E69EFFCC0C63F098753
-:107DE000CC708EF5227F1F4572DBA7EACED9D83939
-:107DF000D649EE6721E65ECA6378B9D24BB99DC514
-:107E00008B1047F472D5CE880DDB194DB08E9AC613
-:107E1000338B3F4578713B83CFFB94CCE67DEA15ED
-:107E2000937F5114FA3FC5E3532A04065F950F4E22
-:107E300075EB476E7C0F27924E8575435E1845FBA8
-:107E4000FDEA908CFB4635A52FA4AB75A3303E5EB2
-:107E50007866D4D310377CFEB088E595172C58DEB1
-:107E6000F1B0F305887B0ABD2B13904FE70F5D1F20
-:107E7000C7FC447A3FF63D7D985C38C6E543E9850A
-:107E800027907EBBE9C437D708FC577AE12946DF43
-:107E90001B057CB79278ABDF1D3B90D3E768685F2A
-:107EA000317911C07B8C0FCF49CA36989CA00F4402
-:107EB000E2F95886A2F37B94059761BF84EA5F4993
-:107EC0009AF3F4533CCEB8EC027BAF9038BC240D4F
-:107ED000F881CBA7301DEBDFA1EDB044F7D39FE3D2
-:107EE000FA4FE9856B747646787DD7E1F752BEFF8D
-:107EF000970547613EBC9E1746455B4F781D63B0B2
-:107F00007E477CF4F1D3399C4FD6971317956FE5D4
-:107F10004656AFD477BF11E44EE9AAF80441B3AE98
-:107F2000B2C62A5D9C47D9AA12E32C4DBF613C2CF6
-:107F30007E77AC14C643FA4B0B272FB2825E502CCF
-:107F4000F7017E5A5751F85305FA63F2E90BD997B6
-:107F500005F2BABDF13E7BB47B13E97D22F0D3C8B4
-:107F6000F143F5EA020D7E54BC44B63FB9B6ACF01D
-:107F7000A7E08F5EC95E21E95DFE44E02D3B3ADC5F
-:107F80008675C32D07E38D2E0DB7AB7471453DE0AB
-:107F9000C6F1ABC245FD4EF5A8ABFA8C80F108BB2B
-:107FA000BFD3C8F07F297885C7E5F81F1B7D1DD397
-:107FB000BAD7B1807829A3CEB9E43A1E245EF3453E
-:107FC000D6A1E29FBCA2C3FFB497D6221FAAF89EF7
-:107FD000736025D2EF1CCA8F70DEDFEEBBDF1E2D73
-:107FE000BE685A6F781FE825B985FFF7F0FE85EC6B
-:107FF000CD82B832EF720BDA23A7D63D91A585F377
-:10800000DC8CB1F7005EC8FAE4CBDA3FBCE39C87B6
-:10801000C0BEF43E23A33F6D6B86BB0CDA97733B67
-:10802000FC91F80983A2E9078FD61F1A027EBA864F
-:10803000FA364C65AE5F12D02FB3515F72457BDFCD
-:108040006B491F26571EAD6F637E4FB39738B4F749
-:108050008909D39FFE93307F8DDACE28BB1DE03F88
-:10806000350AA418F53EC9BD24BB00FC1E49F95EC3
-:108070000DFC16F761F79196A51D70C0BD6213ED5A
-:108080001FFC39E64CE99CFE9C93E5F3854F45883F
-:108090006F96939A08FA4373E9770DBC8D496D3A50
-:1080A000FF74241C24B31DCF9B24C2F43975FDF446
-:1080B0000BEE4B8FF17D6905F76B3E5FDF847EFF32
-:1080C00045B176DCFF16F733307BCA2CE17B35A651
-:1080D0007856DF18C7E66D01BFB708FB6A00F336B4
-:1080E00078D147C4A7D104C8C71345807C22092C86
-:1080F000C67752C6067F02DF9D696E3FE0F19BF4B2
-:10810000B62302F8B18BDD8361FF6D14BDF90AADB2
-:10811000FF7331940FF5B268D127092CED07F1D028
-:108120006ECDB9167B2754D1FA0523F3FD164811FD
-:10813000E73D7F19AC2D5F9EE67A1DE6D16061EFC9
-:108140000C251D17F03CA7C1C2DE1B6AB0DD1E075F
-:10815000FBF86FFA30BD1DE900E8E810D367CE499F
-:108160004A5C02F3932A6FEAFCFC66E54DCD3812B7
-:10817000B7F7D653BA9434E72A03259701E8E60AFD
-:108180001FFDAE9D67147F5C82159FE58D7A9EA3CF
-:10819000CE0FE2F6018EE2850968AF45D2C39E6E2E
-:1081A0003FB357047C4E57DF2F961E61F978A2FE2D
-:1081B000A1FDF569B73EFA08CBF3734ECF2C768E4E
-:1081C000D9501287F171EA3CA6B73ED6067AEAF496
-:1081D000D6F4D970BE35DD3AE87348F7C8A103B1CB
-:1081E000A007DE2FE0BD923B7FF7A61C4BD3ED1F0F
-:1081F000AEC3FBCC9F73793A8384F05D783771F01E
-:1082000073763F7E9F459C3CDF24835D7F77C07FF4
-:10821000DB649ABBE74DFF6450DB661C0ABD056258
-:10822000C0DDE4988067086ABB16E7DB2CCFDA75FF
-:10823000AF5F32E37AC2EB35E3FAD5F5D19922FC90
-:10824000BBE1C3DF6B52E121CEA2EBA6F4323DEEDF
-:10825000F61BC945F4F2E9D69CCFD9A1099B4F245E
-:108260007CCE4311D51F3BFAB84826C5DF1FFAB8AC
-:108270000448ABCDA12CA93FF2890CF95AD1DD0FEE
-:10828000429FBFECEB1E9C0C70684BBC2CF979C470
-:10829000C2F8FF08D033C4795D48C275A9EFD01F7A
-:1082A0007CA0DD067AE7E2ED1FE33BCB3562F0C947
-:1082B0003BD01F2AA2DD74AE79F045EF9F1D013F30
-:1082C00015DDFFFA66AAF72CD93A674A8C4F663655
-:1082D000C7623CFECC05A2EE1DE9990B583C1F91EC
-:1082E000DAF26ED5E9EB8FF4DA0FF80B22FB99BDC9
-:1082F000A0881C1F0EE7B48EB1E83F58C3E86BF6A8
-:10830000789708F1CEA3970878DE3AEA84D212A4CF
-:10831000F9D9FE7827B0E7EC07FE6300BC7350DBA9
-:10832000C6FC81A9E2BDF90F839FE500DBC7217F71
-:108330002FD089D5A55835E7051D725D3EBCF7E7FE
-:10834000BDC7EA02FE2FB9D5F529BE17C1FD15EA52
-:10835000BEBAB3B104E3644BEE564602FE4B9A2C10
-:108360002E4CCD448AA172AC44226648538D44B24F
-:10837000401A43CC90162E62EF7697364E45FDC0DC
-:108380003EB2D808EFF196B4FEE26B685F2605F6C0
-:108390000B7961F894B4BEF31DE075AEAB18E31928
-:1083A000AFDA68D4D981439BF4F9AB5BF4F9FC8074
-:1083B0003E3FFC903EBF2193201DCD32DF920BF05B
-:1083C0003AB0D744F72288FF3361BCCB3181E1C793
-:1083D000BBC982F2B0A8AAB510ECE033AFD90C60EB
-:1083E00047EFF9EBAFF03C3CB42596409CD5FEDF5F
-:1083F000C7901888577CDDB20ECAAB28EEC07F59F3
-:10840000F5BA652DD8E13BAE54ED787F1EAC67C759
-:10841000DF587C4D6893C90FE7E36776FDE2353896
-:108420004F3BB3A90FEA57C704AF2106C6FF82F935
-:108430003F83FCBDB8207F2FAE6AA3DE2E9E97C976
-:10844000E44C70D13571D1F42635CD494BCC1D4F5C
-:10845000E7D6F5B86926F8810637EAE1A2D61BE22D
-:10846000D77F7F90F73F9A18C3749A0D7102FE066A
-:108470003BECBF2F477F277911E79F575FED6E27B2
-:10848000F277E288A2B9371596DF647E1F88DF0095
-:10849000F8F70F7FAF229AF968F49389BCFFAFCC4D
-:1084A0002C9E3989BFDF7FBAFE10EEFBDD7A5FBDFF
-:1084B000CB355E932F6DDC9F5202F6D3AAFD29B314
-:1084C00034F0AADE7430E52E8C7B92C0834BAAA7D1
-:1084D000BFF214F82BAA37894D304F2807B87534EE
-:1084E000BD65877A541F1E067E90B03E7ABD6BBC78
-:1084F000868FFF5EBA55F9AD9AEB2F3B47B64D809C
-:1085000038F5AA46C109D5AA9A6EBB6532C07B155B
-:10851000BBE75A28916291F257F5D6DB7E3C14E214
-:1085200066568F70C27C6817B7C2F7AACD67F13E56
-:10853000C3D288DF3D50D3DD994C2FA4F503065AF2
-:108540007FE9EDD672905FB4DF37217F20671DBED3
-:10855000AF623FC5CE1FE8F74F0C546F3935CEFBE5
-:10856000DE5DB4E919D2F4D164F02B35EAE991D299
-:10857000B7007A596883E05C875F1715DE0C2AB76D
-:108580006B21C6FBD2F299D1EE5B57F8F5FD44E2C0
-:10859000FD233E5FFA97A3A59FC87A8993BC184F25
-:1085A0005EBD80CA438D9FA0FA840FDF978C1C8725
-:1085B00068E99AE913440179B8C5A2BE7F24980BF3
-:1085C000799CEE0096C77715814E29A1545D49C666
-:1085D0002B00EF9BC9444847835C81F7F44736E59D
-:1085E00041FDDD42F09597B03F1BCAF10E4700DF19
-:1085F00099CCE0F74C3B1496EFE27E4EB5BCB2D579
-:1086000082713667BE34A29C5DD87410E3E83B5E8D
-:10861000B3180C541E9CD99A380EE2313B9AD83BC1
-:10862000C5A79B12C7192FB26F47CA0D753F3D0AE8
-:10863000FFA4FBEE9F335DDF64C23EF5088B574D10
-:108640004DACCB8FF6FB176ABB24635D3ED831A1DE
-:108650007BACCE7508276FB6847EF03427C40995AD
-:1086600008AC5F63BF62B12FAD6FA375C11F9D7072
-:1086700048C4DF6B382E3A7FE21880EFC9A31E345E
-:10868000A7C08DEF539247585CE56C8904244A6F6C
-:10869000B3613FCAC33CCAE5D9AB048C2B9BB34C36
-:1086A000BF1E782757BB8F56103F7BDF42EB47EC4E
-:1086B0000FF12E74BF81772DCD2CFEA272BDBE5D51
-:1086C0001509E07CAA377F6F8A06AFAF89BA2E57AB
-:1086D00026AC4BB8D98CF3BAEFB93876DE63242ECA
-:1086E000D84F43CFD950BE571137F67727DFD73D44
-:1086F0000F94B8E6801C5E30DB352711EEDBB2FD4F
-:108700000F4D3EE46F01F79DAAF124D097BDBB4108
-:10871000605FAD6A150243216F265EFB30F61DDEF9
-:108720001F80756BEFD794131F8E57BE4AFF9D7C39
-:10873000C8F05ACDEF3192F59AF2FEA09F317854ED
-:108740006F36E9FC3AA3370B5E1BDE77F537A4D012
-:10875000F9D59EA2B282409CEAF7265DFF10CF3386
-:1087600002F77D62A1787BAE5BAEFB87448BF33F63
-:10877000C2E1F8DC6DA5E9C0AF4F83DE9AC1013DCF
-:1087800012E516F71F9080998E1333BC3B8FE58559
-:108790008B587ECAEA57A6348EA1769EECC673A18A
-:1087A000D962F1DB701FECE57EEE9BFBD271661B9C
-:1087B0005C5912F2AD6B10FA43173038BC30AC6E16
-:1087C000485D143D50C5F3F3425300CE65BDBB98E0
-:1087D000FE652B08C9DAFDB5BA2F93477107827879
-:1087E0006F22B45DC07B962B85A3781F71E50D0ABF
-:1087F00001FB3E8DE209E4F14A813C2250B8143479
-:108800004FBDF72DC073418C137EEEA2A679AC58F4
-:1088100063C5F5333D2DB66E2D9CE7A4CECC19066D
-:10882000744ED73DF366FAFDDEBE0A8E976E65780C
-:108830004F5BE4CD86DF818A3B507CEF5BC0874392
-:1088400063F09E6C2A85952D01D325A07FA5918587
-:1088500002D47BCECEFA4F368833A7427E18CB2780
-:108860003C24B8D621F12DC7FE534D6422CC13BE53
-:10887000831E6906BF0296FB197E8BEAF2A1BFD464
-:10888000012C4D320632A19FC3DDF876A35D319FE6
-:10889000EF63F3B78E4D053BEF700735B8A9DC3AAF
-:1088A0009CA6EA43012BFE3ED4C01C569FDB85F3F9
-:1088B000F3D97D83A42C7DBD2ED915371CE4E807A0
-:1088C0004C8F3F6F75A17FFA1A63747FD64B7D99E9
-:1088D000DEE2B92010BF661FF04CFB06F54ACF055B
-:1088E00049F7BDA3DEAC8B73AE2E3F80F7EE6B482D
-:1088F0001BC661D734C5EAE276AF89893EAE4ADF4E
-:108900009E0B22F1461DD7A8FF7E21917813A3D597
-:108910004BD17FA7EBD0E55BBEED5E077C272383C1
-:1089200076B0072771BDB6CB6FF0CA5787F1D2E991
-:1089300008EAF69D4E85E5BBF8799C5AAEF6DF391C
-:10894000CDC8EF15B17795013EDEC184BCD87A164B
-:10895000FDD1D5ADFB27B0DFF76274A18593572316
-:108960003F521ADA0206CADBFFDEF7D453B94328B6
-:10897000891D50F9F8F4532ECAB729A241C7D7B1BF
-:1089800005DD7C8EE2E53983C8E5C299A7C68FD1A3
-:10899000E659FD70FB8E29E3A96E5F90CBDAFFB13B
-:1089A000EF97EF2D1A18964B741D59C5364DDE1CE6
-:1089B00091B7D2FC504DDE11519E14519E1691CFAD
-:1089C00064F53B6C812CD149487BDFB353A45170D3
-:1089D0008E1D98012F0A2C6BF86ACA789AAF296805
-:1089E000C3F899DA56C189C7FA6A7CBC93E959562B
-:1089F00067107FCF2EB6A0ED6D9003D52D8243A0DA
-:108A0000F46E6DDA8A7135D5D04ED1B46B6276676B
-:108A100075D3516CD76BFF3906E4E7A539C7B09E13
-:108A20007A7E7407E9FEBD8E0B202F6B9ADAD93E51
-:108A30001C717ED499EE3A88F230E2FEAB07FAB5AB
-:108A400086E95EADFF87A1ADBF836E62E79F5D28BB
-:108A5000D1FA7FAA691F01FA12BC710972FF79C1AC
-:108A60003F04F6E717897B08EC47F7D45CB1DF4099
-:108A7000EB1D9183ABE1A9864159969B242AA78FD0
-:108A8000D8827D052A4B72D624DE04F03C921CC4A9
-:108A9000171A7EB6268995F70DF68573D7DCAC1FBD
-:108AA000B2FC15C1D590BF75CD952C3F34D857A4D5
-:108AB000EDFB7BAFBA09E0BFC1119D6FFB66317959
-:108AC000AECEAF2CDF959605FA6635DB2FE0FAA522
-:108AD00099CAC51995A7B76CA07098F1D358945747
-:108AE0001B3A6EB9B118D7EF2D863837F6C43BDF85
-:108AF000CF502E4BA807A4C31E9610C6872DAB4D92
-:108B000041797F65DD56D8F75367E4A2BC3F9FE902
-:108B1000AACF1A114EBF1DC0D2FA2C76DF235534CE
-:108B200060BC41EA8336D4839EE6E749946F10BF68
-:108B3000568E8F61594CFE0DCB62765246DFEBEBC1
-:108B4000613D7772FD74C5E3FE4D160AFFDF0391A8
-:108B500024A17F1BF5DDBBD652B91107F114AE7409
-:108B600090077781FF37379C57F5F715F9346F0D6C
-:108B7000DB692BA6BAD2B571402BD6B27255DEACEA
-:108B8000C866EDD57D27B581C127F5E921EB601DCC
-:108B9000B112C1FB1773A70D5AB710F7EF9B71BE47
-:108BA000C4E54A07FBFB44457F03E8952A7E1ECBBC
-:108BB000774DC2F5882C5E5DC5933A7E3D5FF76CBC
-:108BC00091EEFF749D0FF673231CA93E90C7820B94
-:108BD000983E500F8ED8E4307C89141C01DFFF17BB
-:108BE000C1E95E58F73F0AA728F2E267306ECD026E
-:108BF0002A2F0C1A79C1E1F7BC1090530B34EF9770
-:108C0000D0EF6007DED1D7FD6896E61C67C68335D6
-:108C1000A8FFA9F38AFDB79D13EF203DF92C523F21
-:108C20003BF27BF332F4031A9B502E1EB991381796
-:108C300082FCE0E7B2AA7E59F8D3AAC360479DCB75
-:108C400012B19D45C5AB50BCB594C2E971BAADC275
-:108C50007D74EF5416DFA3EE9B2BF8BBBB2B1EB825
-:108C60000AE3FCBA48107F97CD3B92A0FCEB2E9F05
-:108C70003E08CB29BEBD16E0F78A18FCDD8115F948
-:108C800004EFD9AC987E2596EF51FD4AD3CD38CE6E
-:108C90008AA98C9E5654B0384CD847006EBDD1433B
-:108CA0004A03F36F10C995A78D077897E32FB62075
-:108CB000B8FD63D02B975950AF84BD13CF477CA923
-:108CC000381EC5EBF62CA46F368FD9CFA6FB97E2E2
-:108CD000B84EB4CF1FB3B94A505E3D1CABC0FC5771
-:108CE00059C812F3303047C82328F7F87C88EF05BD
-:108CF0008CF398C9F5B5CFCACFD9401F7893CB1B59
-:108D00002018B0976711563EEBA1D8A360DFCC7A4C
-:108D100048C4FB8564C9F52EFD79079D6B0AF8C729
-:108D2000F95F63C8067070433B3BF4FF9F3678CF12
-:108D3000C4FD10BBDF4BBCB4BD261EFA63E05FF080
-:108D4000B38B6CFEA43E5689F62EE8C75CBED3F901
-:108D5000BBB4E3A9E344F64BEDBB4F005E14EE0158
-:108D6000B807167A58E4BFD7AA9F6F9231F4A4854A
-:108D700096CFA817E3175178BA17D870BDEA7C6769
-:108D8000A686AE65BF0BABEFFF646C6D21F8C355D3
-:108D90007B843CA4B7C7C02FD19D17314E1AED9AE2
-:108DA0001EDFB93D1B690712F23793B65EF73D0D22
-:108DB0004588983FA72B4590006F6E1EBFD08DEF62
-:108DC0008879ABF034F48B0ECF2463B02FC82DF725
-:108DD0000213C221B2BDBAFFBD60215EB0131B05F4
-:108DE00001E9B1F18158DCCF8899E1D15319A30091
-:108DF0007DBE680C611C937737FBFDCF2E4B680757
-:108E0000CAA581CC9FD0F59EB816EA752633BAEE76
-:108E1000DC25737E22EC1D89F7C475582EB07E3B8D
-:108E200017C6627C14DCFF34C2BD4CEF9FEBC1BFA0
-:108E3000A2DAF1C777B0F714E0777BB47630DC9B29
-:108E40002D1F16960FF83E0CF0734B2CF713B92B11
-:108E500070BCBB6208C461D41A048CEBADADBC120B
-:108E6000EF9110FE8E73359F5AAD81DA83C3C27CB9
-:108E70005E6B383608ECA96AF3327CDF9996BF093D
-:108E80007618FCCC6EF7EF7864F7A4EBDA6567FE32
-:108E90008AF7DA9BF5F8AF0ED309DE8FABD4D24D4B
-:108EA00076981E50DF0639319EE0BD7C1BCFC74E41
-:108EB0006CF3839FC6C3FD16C907D8BBB5B682261F
-:108EC000027E53CF29A66F8C6E5D7B10ECDFF88994
-:108ED0006D6071D1FACCEF16797F6854EB7211ECAA
-:108EE0003A554FD1D895436E1EAA4DD97D5BB053EC
-:108EF00061BC207C02FE90D8FEF63CDFDFE83E88B5
-:108F0000F278AE6F30EE83B04F811C53ED5C906B06
-:108F100020475EEE376E5A3FBACE3C65DC2DFDD859
-:108F200039CC10D4EBBD9777DEA4D6037BF7E2FEF5
-:108F30003006B7D0CA382627E00740C14FFC5B791E
-:108F40002DBEEB0D8297CE77DEEA6C94BBAA9FA66E
-:108F50009AFBA94AB95FA794FB75C0AFAA8D7B05A0
-:108F6000BFA5365FCDF9BE067E4F0ADF0B3085E325
-:108F70005EC19F339E046C500E7E1D3BBB5FA76D90
-:108F8000EF21FE2209E9FC7B93EE5DAC156CBD334D
-:108F900039DE575A983F67F4436B45E6A462EB8D80
-:108FA0001BE6CA7EB420FC3ED7E71C4F2A5C8CFD32
-:108FB000C6DD03708F11D9FBE6A147D9EF5D9FA0F5
-:108FC000FBF356EEEFB8D98AF78B5D03212E417281
-:108FD00064DD1CE5775B97EEB6E03BFDCBFAB1F3C1
-:108FE00060F5FBB87EECFE2EFA8100EE0B6351CFEC
-:108FF000A660CE033A2AECAFEE97240FFC4F4779D8
-:109000007C67EDED5637F417E47EF195FDD8BEB5DB
-:10901000B21F7BEF5FCD77DB759C5ED4732CF0C7FE
-:1090200068FDD7FEEEFACC7FA2EEAFCF57C4A05CAE
-:109030000AD3AD01EF4FC6E6161BC18FB49BCB918F
-:10904000126EAFEF86035A90274DDCEF2C3966C0C5
-:10905000EF02ED3E958BF1924946265F76DF19438C
-:10906000207EEFD0E9579F788F969F3B65C4F7F03D
-:10907000E6707FEB6E78F71DE4E57613FA11AB8DA1
-:109080004C5FACDE3794E92946F74A88EBF66E93DD
-:10909000D1AF556DF76F7A05CBD39D14B3701F9484
-:1090A000E9B9BB6259FB18FF2F5F03BB735FAAD3FB
-:1090B0004BEB2F4873EF03BC66989438A29EAB0A23
-:1090C000E1FBA2C7FC4C2F3E068207C669B5F1DF63
-:1090D0009173A5CFA5FD1C7F3C15D743E52DEA4F25
-:1090E000C79F32E1B9D9F3DDE332FFE731B918DFC9
-:1090F0008B39B63DDF492D4BD2556C0C807FDBF3AD
-:1091000034D3E7661B9435001FB22FD6A9B3479F0F
-:109110002A63EF47543E34E562E7D820DFB5FEDD31
-:109120004E12CA427BB4BC7F13C49376B60E71B2A2
-:10913000E3AA343C24A9E5E7CB276406DFD05E1917
-:10914000E9F972FB07BAE8FE9D3B91E0EFB769CF02
-:10915000D322CF217AE6191E3DBB53B9DEA62FBF1D
-:1091600025D31D02F956FBCCB7471628305E08E51B
-:1091700021F1317FFA09D93503E8367E7C4017A703
-:109180006556185FCD36F1FD9E048C5A3E54CB0BCC
-:10919000C791A8E7362685E901367EEE1C59FE7F89
-:1091A00000F2988AEC008000000000001F8B08008D
-:1091B00000000000000BC57D0B7854D5B5F03E7360
-:1091C000CEBC92996426992493F7C93BE4014308E5
-:1091D000112DEA24040C98D209A062B538BC41C90B
-:1091E00043B0BDB1C566201102A2861A1128E084E1
-:1091F0008762D5367801A346EF8048B1D5FBC747D3
-:109200005BB4F7F78B4A29528188964BEFB5F55F2F
-:109210006BED7D92394322D8DBDB3F7CB0D967BF51
-:10922000D65E6BEDB5D65E7BED1DB36A602C81C159
-:10923000CF4C334B64EC1AC67F324F316FD0C69897
-:109240004555A9FC9A5321D37CC867AE0C99168961
-:10925000D40FE909230B59CA21DD620FEECCC29667
-:109260005E86FD2C9A00FF85A68B64D66629C3EF27
-:109270006A4FBF8BB193079C9EF5F09D7DF995CC0D
-:109280002A189BCB443D336BB7C431F67C9B14B298
-:1092900040BDB99BCD3BADD05FC56AAF6C87FCC00C
-:1092A00076C9B313EACD6DABCCDF02F93BF7977A01
-:1092B00064681A83E3603EE80CCA50FF9AE649EC02
-:1092C000E3718CCD37074D0A7C674F4B6C0FA3FEC3
-:1092D000DBB0FF65D02819E0F90A7FAE1F4A176F8F
-:1092E00036C364F9DCBFC27F8261F96CE8B7BB4B5F
-:1092F00066305FB617BE170E7D5FA6840E49318CAF
-:10930000D57747B4677F330FD643405980F0E832B2
-:10931000B13B7C369A74525D29637FC0FF26336669
-:10932000CAF48D53C763263769861DE65DC5E735E8
-:10933000B04F22BCD6B32613C37E3AE319BB3A6CB6
-:109340005C0B0B45437A520E50F922F3464A6BD41C
-:109350002C1AEF4ED66F6239D8EF80C907E3D9FBDC
-:1093600080AE2597CEBF06F960FCC87C3055F0C1B1
-:10937000B2532C742D8CB76C250BD58FE6A91DD25A
-:10938000450A0BC4005E17010E62451A55C6F1AAC4
-:10939000160EE16569509F477CAA6178463C869726
-:1093A00037F67C650ECF279918B3C60DD11908453D
-:1093B00070274D6A1ADB04705EB3322833985F4A17
-:1093C000BA77522EC01B5DCEE7DB78DC6251C760F6
-:1093D000DEC7B2A1DE176995CFE54179A3C2BCDD36
-:1093E000501E0D78E982EFDBAD2C80FD3F9EA75229
-:1093F000BF6E13E75FA3E263636D4897BE9001E918
-:1094000092C01CC88F1A3EB7DBA15D19B693A8DDC8
-:10941000607B0B6B8B0A6B5FF5A29531582F175E43
-:10942000B007CD509529FE4C27F497F87B335B0F9E
-:10943000F9B32FDA97607F678D6C7637D477C9AC34
-:10944000A99BF8650DE1FF8748D7F1C84D55A90CD8
-:10945000795F9A96CADC58BE9ABED73B81BF86A177
-:10946000EF607956DFCD9CAFCCEA4E18EF82B3FFA8
-:10947000079807785800F2CB550E77E3FE49637FD3
-:1094800004DF1B7D360FC7BE7F2CF2AB59BEE766EB
-:109490000BF0D71479E5C0BD308FFA749BC30C4D27
-:1094A000AA33FFE3B7B742FE93FD4666463AEF990B
-:1094B000349B655F0A87962E0D1A3FEA0F5B2F7764
-:1094C000EDD5E7EBBBF5F946A67CD4AFF101A06082
-:1094D0008B6A779D8C26D9E1F90AF8DB6C6E3AD558
-:1094E00005F09A5F327B56C1E706D5BF03D7538399
-:1094F00061E028E2D99CF9E9683FE0A52AF3CBA313
-:10950000A988FFFB9807E1BE60AD9C4BF4D862557B
-:109510000361F2AB51F07F67462D95776E35AB1244
-:109520002FAF1D0F726B092D61AA623100FE1B3730
-:109530004FFD441A4DE516A44727F029B57B4E0A86
-:10954000AE82764B362FAE65507E86054D1680E78F
-:109550000F623D35CABD532CF0DFCEB89A51285F5B
-:1095600094BF2A3EA4FF5AECEAEA217CBD34B83EFF
-:109570002D1D27002F373289C5E2BC9DFE97709EB6
-:10958000F5967E5325F473FD5FBF20B9BCB8F9D5BD
-:109590009C13E350DE78E712BD617E284716DF7B1F
-:1095A00088BE4B332C04DFC9745BD00CDF5FDD62F7
-:1095B000E679A789F227B74B945FDC2D052D595822
-:1095C000FF627C25CAEFED4687995D8AA748BCFCFF
-:1095D00071DBEF621880FC47102DB8BE98A329C636
-:1095E00067C7B2A69819A588AF1B3E41F9B578BBED
-:1095F000EC09A19C7ED9EEC963989F3C6AA10DDB62
-:109600007F1E5F89F8DB31D921D377D9877288290A
-:10961000DEBEEBE1BBB2E32A15D7CB91ED1CEEC564
-:109620004ECB1348E7EBFF2A13FF2B06E6DF674319
-:109630003A7847E1BA53B7ED9982F8FD635D8A81C4
-:10964000EA3F2B3107E2C3D99C88DF174B8A0FD73B
-:10965000D992CD4B6B59CC10DED7A832E1BD327315
-:109660006562BF8DF8FE66D477F5DB81CF71FC199A
-:10967000EFFFF656D710DF4B33364FBF06FB7FD2D6
-:1096800048FCA5F5D3B8EDDB823F180B019E160B05
-:109690003C993357E6E3F8975B0F8B5737E53B6C04
-:1096A000975F1783EB7D1BAC8F62C6FEAA4AEC2B3B
-:1096B000A0034B8B233D33D27AD4F493ADD0C0F5C5
-:1096C000BE8779F7409A64665E09E457769642E56C
-:1096D000D95926C287F297E57BDF04F89F53FDD165
-:1096E0005990CF64DEB1A867D40147552CF4664386
-:1096F00006294738CCC13D24E7200F78DA94C09E74
-:10970000581F066786E80FD6AB0BFB39FBDE974781
-:10971000118F0D199F8E46BDDD78F10B930AF4B4BD
-:10972000F54A24676D1E1F43FE68ECAD630B4A8645
-:10973000E463A387CBEF4BE44C9691CB33D700F592
-:1097400033359BCBB74E275F9F5B9BA38228F7B631
-:10975000BA8256043ABA3CC050BE4F2F973D08B665
-:1097600066A7F82C9C5E16EFAB4C467EF5C81E141F
-:10977000F17DDE8FDBE221FF66F9648F0C799B7748
-:10978000577B36CEDB6314E539019CF71B132BC9DD
-:109790005E99EE95695CB6242688AAA2CFFB8E6BF3
-:1097A000018CFB1DE67DE404D0B1069437D2B10FE5
-:1097B000C7067A9D71F827205EB4F97CDB33F591FA
-:1097C00013E1768697DB03F089EBB1F2E1F1305AD1
-:1097D000ADBC0EFBB9FE3A4E87D3CF9A83AB61FC8A
-:1097E000D356D03361FAE2B49DEB1D5F9624ECC2F0
-:1097F000EE0C94FB8379659401D7FD3D0E8E0F9797
-:10980000A93B03D7DB9F247D3F77B6CB2C0872663C
-:1098100069BBC48200E2E9A79ECF40F9FBC99EE77D
-:1098200033E685C117D94E4BBFAB8DD7F198D70220
-:10983000E3CD63DA78A1341C6F9EC7FC21CA0FD632
-:109840003ED9DB1F663F90840CABCF367B497E9FB1
-:1098500083D5887CA7B53BB724CA8B76E6396609E1
-:109860004A30D4BC5E3964C6FEBCDE5C17D0BB4156
-:109870006B1FD17FA7E01FA9470AD9A17E74C90039
-:10988000C9DBA516DFD154285A8A7484FA53918E05
-:1098900012F2ABD784F356242ECFCF387C7767C132
-:1098A000BC1676E8E9989EE5E0F375B8B83DD86057
-:1098B00053505F24B6326E077EDF10447DED8A8AF6
-:1098C00019CDC08E31A5B86D28A7AECF8F6A33C42D
-:1098D000E2F78C20D64F4F29A476812ACEDF81442F
-:1098E000166C95B0CB2689EC40473F53E07BDA04F9
-:1098F000E6580FD9DE2C6E27BA9967B34C7662B75B
-:109900008476A286074DBE23DFA0DC3B2D59886FED
-:10991000A45E89EC3ED9D03D07FB1D898FB644F08B
-:10992000D1967F321FED1A918FFC2AF191DB323CE8
-:109930001F81DCFC46F559C0A700BE9204BE1E166E
-:10994000F265E0FB16A21BFC4838DF5AD15FADC5BB
-:10995000169247939CF874507E433FDBC0FEC47D53
-:109960004A32DACF90A6B6CE55B9FDDED72F417F69
-:10997000D1575948EF3D60E8CB423B3FA9A8691F4A
-:10998000F247D29C92B256B24FD29C28F751D6E001
-:10999000FC1B9A27F9B81D00FD221FD599683FD1FD
-:1099A000706FA58FDB0135B43E1A375855D46793D5
-:1099B0007AB356217F34AE04FB08E56F4FD7964546
-:1099C000906F9865F3A09D62B5CC2CC176AC5DBF5D
-:1099D000CED649DD641707A6320FCAED734143C0E6
-:1099E0003806E56CFF8E1FA11E5F5AE209A8B8DE9B
-:1099F000045FE632D20B9D4E6F721CE0F5E0DF642F
-:109A0000DA17758E853CA42F097A76D679939D90C6
-:109A10009FB7C14A78EFECE2E5E7EC8020E83F45EC
-:109A2000E6FDB1580BD73397CA030BE23D7102D361
-:109A30007E36633E45CB773C46768CB6DE3BB3380C
-:109A40003CF6125F165ABEB7ABE3FAA260BD27CA56
-:109A5000066D531440BB3B1AC7E4792F0EF7A801DB
-:109A60000049C1EC7F6FAC9E189EE7F587DA3F3066
-:109A7000A33A8DF4EB6039820D7A57CB7BAD00C7EA
-:109A80005AFB50B902F6A4A54712ED27CC980CAAB0
-:109A9000F89C24C60F281BBD808F87AD4C375E38DD
-:109AA0007C4A44FF46E8DFA68AFA8152DFE45C8004
-:109AB000B74C6BBFAAC30BF03D6CD4F7472815ED2C
-:109AC00031A38DF7EBDCD7376E481BD2FF600FD880
-:109AD000B3C70FD9016BDFAFED180363453B3E37CA
-:109AE000A17ED5F479A34B223B2372BD2665F3F505
-:109AF0000A766D5236C90D6EEFD6A2BD2B939D3BF3
-:109B0000059756E34A1F43FB12EC86D46CB21B3E0A
-:109B10003D7908BE77CE384D767EE34585EC8F469D
-:109B2000B03FD06EB7F4727B96F51849EF6A74BFF8
-:109B300053C89F4E27E87DE4D397A5F1C8A78C357D
-:109B400065DC043468C9F6E6211CDA7E2C12DEEBF3
-:109B5000B2B95DDE5858B5251FFBDF2D31D4FBEBC4
-:109B60000B3F4A44FBA4B1F7C3C48561ED96F63CB4
-:109B70004A7858BAD738ECFCAFCB9669FE0D2F1C4B
-:109B8000F0E27A3F1D94682D2F5182EBD0AE5CB28B
-:109B9000C480961A2B0FCEBD15D73D9B6D627930D0
-:109BA000BF5CD44BB89FD83B33700DEEDBE0AF0405
-:109BB0009FB6FA16D1FADE3ADB62635908E7BCBBFE
-:109BC000090F8E282FE2617D6155328ED35037C543
-:109BD00081FE9346B0B3B0BCE1DEEF923F45836BAC
-:109BE0007D8FB106EDAF0AB0B7FE15E04E8F9B56E4
-:109BF000E381F5982AEF1BBB02F29B4690BFBFC9D9
-:109C0000E1F46C937C81EFE0BA7F41627BD4A1F2F6
-:109C1000CC1E6ED7DD9CCDED40EDFBCDD9DCDE9CBE
-:109C200018E89B84BCF78AD21F8DF66F23F37E86DB
-:109C3000FB4EE6B3A97B884E5CEEB85A54F22B5922
-:109C40005CFD0F8CC1F2890AED2798D2FF088E7B4C
-:109C5000769DCBB39E09FEC5FCBD2541DA3F64FB72
-:109C6000E7237D2B841D79F6851BC6CE2B19B29375
-:109C7000D6755983AB010FEBECEA4F6A50BEFD4538
-:109C800021F9C62C037D93901EFF1547FDAEB30648
-:109C9000D721FD031B8D54BE2FC5DF807C79AAAE72
-:109CA000261FF7C1CC16C8AF037E32BA3A18DA0BBA
-:109CB000B07D203F83C5E5632AE42705E62A12CA62
-:109CC000F908FB6312FA7968DF0083C3F72A21B62B
-:109CD000F2800B4E5A6809B47D153F648F1CFB72ED
-:109CE00096821F353BC560F12FC5A6D5B3A3988CCE
-:109CF0007CBF66E0A801E613EDEA233BB6BE5BA29B
-:109D000071EA0B9F33A1DFE4AE6EBE2E1BC53E0091
-:109D1000F09781F6C0DAEC68A1C7DB38BFB33EDA52
-:109D200047B367383D19837AF6F0FDC42AAAA7F530
-:109D3000675ACDFD5EF5C21F037290CA7F922D89CE
-:109D40007DED6A9176F0548CBB49EAF3CA88D7B1AD
-:109D500092279C6FB4F429212F620F0F4CC1F53B61
-:109D600000FC857E992D52DDDDAFC1FCB68C2FF253
-:109D7000A009E5067692CBF03BB022E0BDBCE7B38C
-:109D800029C8376070D37A6DE8A994EB6DA4B769E0
-:109D9000FF9814DDD485E5497714925E8D1AC7EEDD
-:109DA0009801DF7F2EF09A6CE37E2EF7EA40D6F220
-:109DB000121CDF77F76B387E6914F929938036F629
-:109DC000384ADBD12FE466AB24ACF7680CEF3FC117
-:109DD00020DF5157427297F2711EC9BB13D29E6C9D
-:109DE00027F76799590DC289DF693F069C81FB59A6
-:109DF000F473613F49393C3D9B1C5250406C65FDFA
-:109E00003BF6207FF6981D88A7DA9E5F1E477D5996
-:109E10006B61DD32DA2B1176C6CAF49987903FCF99
-:109E20009D39B9E37EF8F6E84D073D7EA28BDE7ED4
-:109E300088DC2FECC42AC923DB7BBFCBD6DB7B833A
-:109E4000F97FB8BDC7EDFAC09E68754F983C6F1496
-:109E5000FBB4734BCEC7A09EF97890BF404F570C10
-:109E6000D92BF376477F88EB6AD0EE8FB01B8E3DFF
-:109E7000111D40FA9FEFB6929F4E41BB07E0396338
-:109E80001FF80122C765F27925DC3FEC337A56438F
-:109E90007F8D779EFEB901D69DD205764F2CDAFBD9
-:109EA0006A2CC9D9D765B607ED32C5EB40BF870626
-:109EB000BFE29CE2F696A05CE4F35F660AE5931DC0
-:109EC00064624B281F13CA47BBE725A1779645411B
-:109ED0001EBE37BBFD7F41BAA598B9BCC276F8BD9E
-:109EE0004BD85B5D801207E2E538ECBBB384FEC65D
-:109EF000FDCF83E9C1F5E4C7B1103D3F7EC5BC137A
-:109F0000FD3C1F171A4226EE97203F96DAAEB0644A
-:109F1000A8AF1EB70655EEEFB21840FFCF7FF8AEE0
-:109F200037705F31FF15EEC79A7FE7CAE9B8FFF8CF
-:109F300078C61413CA9B85CC4F7EE7C58CFBA197CE
-:109F4000B220F757338701C7BB0BC4C6561435017F
-:109F5000C0FE55F05932486857A86D9027A3D9DB49
-:109F60005103E3CE6B33D0BE647EBBDE9F7E61FDCA
-:109F7000DD35A8C7D7B619B8FDD82E911E9FCFBC26
-:109F80006EB43B34BC16E4C473FF689BC18BE35CC6
-:109F90009F6322FE031205697E226D330A3FBC8057
-:109FA000631533843035483C5DEB506A86D3CF5A15
-:109FB0007F6DC6260BFAC306D20DE407BE60F2CE53
-:109FC000263F6A5C3E433F629BBDA9BD8697D39AFC
-:109FD000B9601DF051F9B50A37F8981A87F2323D89
-:109FE00087DB0F91F35DD8A1CF479E4F2C0DEAF38D
-:109FF000F399BF203907FD46FAEFE9395C5E5D58F9
-:10A000009F25CE013C740ED06654DFCE4279B54E0A
-:10A010002179B92A8DE3CB90CED36C67F56CE25FE2
-:10A0200027D817042F873FFB5A97847AB3CDC9F9F5
-:10A03000F27F0A7724BC37E4E413BC6D68E4C1788E
-:10A040006DEBA420C71787FB4AFD174B72F47268AB
-:10A0500030FF8FDF77727E5C278BF5E6203934CFB7
-:10A06000C1E7F4B1E4792284DF6D601F00DCF3D72F
-:10A07000C96568A74C9A69A37934BC62257F6BFDDA
-:10A08000CAFE0CB267ABFAF39B86C12B42AB68F2F7
-:10A090000BEACD73C13E01D76DBBFE9C0A342D0B7C
-:10A0A0003F779A99E6BD2F2701F7231FEFFB25D2B3
-:10A0B0007B9F95F413FCEF9019E5D70B596437E5B6
-:10A0C000A7F9EFCF41BD1E15DAF16416DA29DC4E8F
-:10A0D000AAEF3577A11D38AF2DECDC0BFFD9A03FDF
-:10A0E0000763ED71E4DF609DFAEF4BB645B4BBE466
-:10A0F0005C8CEBFB4D26FF28B4EFAEBFCE9B8C7281
-:10A10000F5CC520343FACE973D8B508E9CB1EAEDCD
-:10A11000EF33764EAFDD8374F6E4239D778F486787
-:10A120004F3ED279BE81F9C3FBA9473A037D970917
-:10A130003A9F3970553ED2F9D37D57E5239D3719A3
-:10A140003BBCB86E7665FAF7221E4F4CF691FD04C3
-:10A15000F22AFF9BF0E38B11FCF8E2FF1E3F52BB9B
-:10A1600091F4E1D19CE1F5A1CBA4A6A13C9C67317F
-:10A170007FAD5EC49F61FD6B1633F9255EF9F2F386
-:10A18000879E403BA457263B44EBEF15C59F837E3B
-:10A1900085578EBB3D0169E4FEEF16FB18B78505B8
-:10A1A000D0FFA1D9FD9AFD18298FDF17783C9DE3D8
-:10A1B000FD36ED1785BF7689E8D312FC9CDBA9BB81
-:10A1C00025F2C75AD46E2FDABD0D2FCF75A0BFF67A
-:10A1D0005490FB671B0E8C25FFEDD2E0ABA154B46D
-:10A1E0000B7B2507EE1F96EEFE3006CFBB613FFAD4
-:10A1F000494ED87E74B2D88F9E0A7E1C83E7E23027
-:10A20000FE54D4CBD1AE0113F26F03ECD3A00A6B92
-:10A2100050068E627F0D2EE609A0A8E8D1EFDBB4D0
-:10A22000F3CBAD3E13C9BBADBD5210F76989267F94
-:10A23000561AEA2796E6A0732EB15EFE33C79B98A6
-:10A240003B3EFCDCD8FB971C7EAE4CEDFBB7C4124A
-:10A250001FF61B9997EC802D7621971492537FDE81
-:10A26000E6A47D0FFD40FD3F07B328AFE9EB450AAB
-:10A270000B2980F745B3BCEF21DD507E8722E477C0
-:10A28000787EF03C9AF571FD02F23C34DCF9B83886
-:10A29000A7C6F3DDF0F60D6C80DAE139AFAE5F6D85
-:10A2A0001FC09AC6AA00F75DB7DB3C68BF34025FE7
-:10A2B00037970DF1E13231158D0F1B849FB771C9AE
-:10A2C00047B41F68EC911CE8DF5DE6E17CB80CF652
-:10A2D00049E6D197AE5BD60D7C1806F748EB785C63
-:10A2E000AE7E1D0FE6FF49FECCEB72F5EB579BBF30
-:10A2F000E6171F9C67AFC4D757C4BC22F79791FEDF
-:10A300006C6D7F78A572EDA6087CDCF4BF8C8F9114
-:10A31000E4DADCDC91E49AFEBCE01BCBB5C87383C5
-:10A320005CEE07C773033CD7FD9F9E1B7CA276247F
-:10A330001A480F7A75E7A968A7E338EDDB65B20F15
-:10A34000A6C8FC1CBADE6E263F6DE4796BA33A45C5
-:10A350009C2FF6FDF66AD49FFB8D0CF5FA12DB629A
-:10A360003ACF6C949F3139D461CE19954364BF7F45
-:10A37000D3F3F775B983E7EF5978FEFEAAEDF378CA
-:10A380007F185DAB4AC0D02FA1389661E5F62382D5
-:10A390004FA245FC844509306758FB91DAFD34979C
-:10A3A000DBCBAF8A381AB789B5637CC6C3F6682F92
-:10A3B000EE4BDC061EE7D392EDDB8E72D2A2723C2E
-:10A3C0003FFEC22DCC00F37FDCD84DF224506FF35A
-:10A3D000A05CD4FC305AFF56B15FBD52FE3F30C87E
-:10A3E000779CFF07F3FF2479F06FDA78DFF49C6C39
-:10A3F00033E046B74E189D87BD81E73B5997F2F38E
-:10A4000048FD8CC4D76FE7FADECC25B9E01D4DE7D7
-:10A41000FE572877A2CB073E467F0FDB6F5671DFD2
-:10A42000817E0FD2971B92B91E533C158867B0F7F7
-:10A430002A304EEA03FCEFD523DB87A706E513B7E6
-:10A440000F4F8D289FFE3EFBF04799BED3C867276C
-:10A450002ABDF9A83FD7DA017EDCF73DC5E36BB62C
-:10A4600059397F6E93385FB2E678CD7F42F30A3C6C
-:10A47000CBCFC723F98AE5E9F96A30FF4F96ABB62F
-:10A480004138FE97E5EA92FF8A413FE8C8FD04881B
-:10A490006E15557D84B7819725B633CC3FDDD8C77F
-:10A4A000E3D4D205BCDAF70BC2DE5D94E7CDC07809
-:10A4B000AF4FDFB358582C9842C8636897F96C7453
-:10A4C0003ED0D0CDE3481A56323A0F6E40FF6709AE
-:10A4D000FA05EB18DA7FCFA9FEC2BCF1789E610BBA
-:10A4E000C8B1E8379FC1D0EE3BFB1ECF37A8FE12A4
-:10A4F0002C6F5CD9AF3B87A8F8EAF335E8D7007832
-:10A50000C94FE042BF4D189D66E7F1F84B2DBD29BC
-:10A51000027EF4E313FF77CB41B417A3D53E3A177D
-:10A5200068D8CF8DB80AD94BFE7B76571C433E6A5C
-:10A53000D85F39F635AA6F1D8BF66EC5EF6B1DE837
-:10A54000A7F8F45A17C51F64C8FD4BD1DE3A92ED47
-:10A550009F84F8B09707A7A2BD9A09F62ADABF9F91
-:10A56000EE9B3A16E1D6E4DF26F47F43BF9BEC7AFC
-:10A57000FF36B378B3EE47FFF7CE24DA3FEE4BF168
-:10A580007F1BE7BFC9CAE10D6CB4F2F52AFCDE916E
-:10A59000EB5F5BF749B281C649BACD42E7D49A5C1A
-:10A5A000D864647E4BCE903C1927E2E9001F3C9EA4
-:10A5B000AFB78EC78188BCCDA58F6B3C9D33791C0E
-:10A5C000C2332E4FA1760B2D0312FAE1178AF3F94D
-:10A5D0001B449C85166775C6E15B80F8602B6B8613
-:10A5E000CEE5B3B1BD83F3BF889F89BEC8EDE86CEB
-:10A5F0008789F8C6DECEF8B912F00DD267E240DFE7
-:10A60000A458984F6E676822E2F3958B06C2875272
-:10A61000F7069DA7C422D9A09F9C0DFDEB0AD09FF1
-:10A62000E278F75AA48BDAE1A842D43DA7FAEEC942
-:10A63000A375DE5488FBCBAADF1879BCE0CBD164CC
-:10A640000774662CA378C1B3EF03BF665DAA0FB48D
-:10A6500034C056537C6076CF3BE4D7B7EF97868DF6
-:10A66000FB7C38CFC6E36F027D1487C626BA081F6D
-:10A67000CACBBF0FA0FDA1AC53C893D166F41AACEE
-:10A6800048D7558CFCF0799D0E03D22553C49D9C70
-:10A690007BE5BF47FB69BFA2F9F1833C4EC8D8BF39
-:10A6A00006F75FCAAAFEEB6005B3FAFD4E4303FA54
-:10A6B0003D8D030DE43779399AFCA3993D39ABBF41
-:10A6C00005F9CC76079350FEBC785726F27500E664
-:10A6D0009937CC3C9BF38CB45E9497A30DA8B794A8
-:10A6E0008D8CE21415676215C1FD28E4A19FE582F7
-:10A6F0006FB4F34900D78DFA68519E7F37D23B5A29
-:10A70000C801D61C45FE44BBC2FD1EF6E6F79F5DA0
-:10A7100005F91DC21F7BF895E219E4BF5BA7484805
-:10A72000870BCEB9990EF8FE8B3C6E8FD8953EE61E
-:10A73000B085E3FF30C56566BFCCE3D61423E713CD
-:10A74000659DAB0BFD835FA4F929FEF4DAB6904C4E
-:10A75000E75B8E138FD4A861FB9BCD5C8F34ECE557
-:10A76000FBEAC8FDCCE5F4C7B13CBD5D3E98FF27D0
-:10A77000D925EF0C8EFF77EE53987E7F17699F44A3
-:10A78000EEE72EB1BF23FA1BC94ED1E23CAA86C622
-:10A79000217E78D5AED941015D1C4C958D8FCB2C97
-:10A7A000FAFE9F12F13B5A5C4C62ABBA0AE3CF0748
-:10A7B000EE63E46FD3E276B4389D4015DF47040CB6
-:10A7C00020F7B2F07CA883E27352594892683FD0D8
-:10A7D000CFB07D12C6E940FBFEBC6C827F3BF3B478
-:10A7E000CB24175509E1B7627C473CC21DDCB20897
-:10A7F000C7BBC946E35931BE239EF611B48E537CC4
-:10A800003CAE73D2121E0F9A02FA17F329B99C2F8D
-:10A81000ADB34D14E7A9C56D68F11D1A5EAA04BE5B
-:10A82000530A1665E17E418B03D914157CCA2A634D
-:10A83000FC8790FB4B0D24F7B5F8BACE3C3588FC6D
-:10A840007E0EE3406D571EEF11895F2DEEE3FA7423
-:10A850007F72FE788AFB203DAAC56B68FC1246C752
-:10A860008015C6DFFA32B7DFAB969808FE734BA7A8
-:10A87000917FF1DC5203C37554D56BE6FC1731DED2
-:10A88000D6D92616C27E95A015E5A7C60797B35F51
-:10A8900081AE85E8BF3DDCB237E704ACF9232DDD9E
-:10A8A000949EB34ADDF2184C07E6A0A41AFD64C6D4
-:10A8B0004CE56A8C6319C8908075CAF6E6CEA27C16
-:10A8C000C2C007989FF6E4AC590AE8897379033B44
-:10A8D00024A8EF2FF87026E5912753189BF0C46F3A
-:10A8E000660668DEDC1F3549F8A3CC4EFFB5F909D2
-:10A8F000785FA07F4D1FF97D78DC3FC605223DDCE7
-:10A900003613D9376E118FC9AA457C269ECC40BE1E
-:10A9100035792C9D67DB98BABF0FCBD3CC5CDF3386
-:10A92000CECFAD79DC5F4C2A1265679AE65FEA0FFD
-:10A93000A0BC6ACD7252FB41B9BADF1CE47E2E3E48
-:10A94000FE5B074AE91C4A8B3365CC913EAB94E22F
-:10A950005174F987ADFC5C94298E74B41F5A8DC272
-:10A960004E15F9A834FF77F3C3ECA4B726FF4B09C3
-:10A97000AE8733077F948B72EA0613D8F1C3C8A55C
-:10A98000D4422E97CE196DED12D86D6FA4FAE7233D
-:10A99000BE8E47CF99E28479CD8EAF343911DEC0B7
-:10A9A0005332CAC904416FE72C0E9FB3DA272D84B6
-:10A9B0007E5BADB09EA17D825FF192BDEE9F25DDF5
-:10A9C0000470B74AC27E676A2CD9ED856A2C9EFB5B
-:10A9D0002D6B7E87E2AE652107642107DE6EE9CF2D
-:10A9E00055F240E5766F94D1DE7E479C3FBF93C51C
-:10A9F000EEA81B66FFBB299FDB873364B514F9C83B
-:10AA000075FFC4776A812F64932748F44BB7ABC8AE
-:10AA1000EF87EC15EE7EE847CABCAF1CE3965BD32C
-:10AA2000EF2BC7B81339CEE3F685E537E5733EAEB5
-:10AA3000C67A88B7E8A672D463FFB0FE62A1BF925F
-:10AA4000BFBFBFC17ECC1CAE6596810C05D6A7C723
-:10AA5000EDDF8A74BB30F7433A8FFD41CA5B1F605C
-:10AA6000FCC45BC68E49312887B224C1B7DC5E3B8B
-:10AA70005AA0F93D79DCFBD162EEF70439C4E32B2F
-:10AA80004BF93D9BDA598CD673AD88BB98E2E0F761
-:10AA900096A69467795A616AD3D98082727ACA710C
-:10AAA0005F0CD28FCDF297FB4A47B6C398DBA886DE
-:10AAB000CB95A96A581EFEDE58A8CF7FDBA3CF7FB7
-:10AAC00067C25F0BC2F31BDDDEE771DE2F493C8EF0
-:10AAD00033703573D03C5D5200EDA5E2E753BA8484
-:10AAE0007F97E20D7F26F673CF4F60549EB8D7B2A2
-:10AAF00013EF1F687E72599417BB9925338EF0416E
-:10AB00007A764012718B2E3A0B6207EF7670FC4119
-:10AB10005D13F47370AE4AEB38D16660D7E15A2FFB
-:10AB2000B790FDA4AD8B562BF037E0B122D512853E
-:10AB3000FCDE6AF46CC6BEE428B38A7AB532C6423B
-:10AB40007DCB3F56482FADB29A29F4F5F08351944E
-:10AB5000AF50980FE33500C45998BE65F4049B705C
-:10AB6000BE500FE7DBEA6424AFE40A13E969E89713
-:10AB7000E87A78A321C868FE950AC5630A98B57576
-:10AB80000723D1F7C7C4BA960D2C44722CC5427264
-:10AB9000EC08F48FFD1E7E5DEE223F5BA17A3B96B2
-:10ABA0009FB714D0FD9CC6C17B478A01812B1476C8
-:10ABB00094B397DF0FD3D6B3265F22D73348C15C57
-:10ABC0005722E320AAF80F4C2311F53E237B5E3B6E
-:10ABD0003F4CB768E58A17C7491EACCFEF67258A97
-:10ABE0007C6A4116AD37A8123294A1FDF1CBBF208B
-:10ABF000DF6AF261C7DA1F937CB814FF85DFA7FC18
-:10AC000034BB83E3BF200DD7A11C559086FAAED587
-:10AC1000E9517D61F9425846B3E3103F500FF233DA
-:10AC20006B3ECC55C2FC83A9052A094BA8E78D07CA
-:10AC3000380E5BD5345CAFC38C5BCFC78DFEC78E3F
-:10AC4000EB8671A1DE613B8C0BF5765BCD2143CCAD
-:10AC500070E34F5071BCCB8D0BE824A44E137806E3
-:10AC6000BE08A05FEAB0DD40FC394DC4EF1E4EE0E7
-:10AC7000E3B1427D7C4D6E148C4FFE587D3CCD0D72
-:10AC8000D2B636D4CB8F596376223FFE52F0C9D16B
-:10AC9000E81FE7A25DF5CB39F94750AE4C895DD589
-:10ACA000864C328D7593BCD1E4DE85E40F2B300FDA
-:10ACB000F2EF9A02A0FB0FB2DF9A839D1F713E96BE
-:10ACC0008BFA0FE4C3B70A122E855FE3470D6EE4DB
-:10ACD000435C07837C1801BFC6476C7A3705206E3A
-:10ACE00007BB1453CD4E65AC89C789ABE943F30369
-:10ACF000269E6269E2F3581520B86F703E42F168F3
-:10AD0000D78EF2FB10DED9633ECB50B0B27B6E0122
-:10AD1000EEC300DEBAFF9FF046DAE5978B97D6E0E8
-:10AD20008A5CC7DAF8D28CBD142FDD38CB46F1D35C
-:10AD30009344DC69E31203C511C1FE8DECFE066687
-:10AD400009A21CBE46D8D15A1CFF8B12F77F060EF3
-:10AD500098D53D61F6F8A571D42AC5690756F278F1
-:10AD6000EB417BBB9EDBDB837A4DDC1BE81CCB65B8
-:10AD700079E7DD2AC553BC24F1FA81B98CDBEB7588
-:10AD8000A27CA143C45BC05C1287E2D93BBB18F133
-:10AD90007FA73D9BCA5364AE7FD8B7B8FEE9CCE22B
-:10ADA000F664E7ADF9540EFB825188F7F932D8CF3B
-:10ADB000FCFC9EEF0FF2F878917EDA4D05DC2E1B3D
-:10ADC000B473443ED22FBB2BD3BF05F965618937DD
-:10ADD0004302BE9A6FE27E57E0BB6D7867A6863568
-:10ADE000ED5672F0FE45D3BB861CE2BBC789EF8AE5
-:10ADF00081EF72747C172C18CFE52F0A538DEF0664
-:10AE0000F9AD30325ECEFF148EDBE9ECFE7D03EE51
-:10AE10002B7ACD44072DEE31729D87C173C2C8E1F4
-:10AE200071C932C1B36F3878AE84FFC3F92D89710F
-:10AE30003E1F691D24292C602F1B5A071BDDFE10A5
-:10AE4000C23FB81ED6F07DE42570CB36E28B9B6FF7
-:10AE50009539BF46737D8EE74DC9307E9D18FFE65C
-:10AE600075BE6A27D6AB93080F75BDF51417C6AA31
-:10AE7000F9B99107FE203CAD42CE69E75BB345FBD3
-:10AE8000998E3A23FAE366D5EACF9966DBF839D68C
-:10AE9000CDB38C1F85DB3DB3D986CF308E71369E06
-:10AEA0004369F5818FDE2F183C872AC073A823C21F
-:10AEB000CF720EF81AF9FEB584C5DBEE06BE2BF88C
-:10AEC000694919FAE326272EDDBD11F24F6E2DA236
-:10AED000FC6B89B7DDF31696EFC8A77CB541223E1F
-:10AEE0003D57CFDB1756DC3A2D2B06E5BFE817D7C9
-:10AEF00013EED7A3FC9D7550CF3D3ABB0CE34BAB93
-:10AF000085DFE0DCDD8CCA6F1C63E721BB8B55F26B
-:10AF1000FB554789F2EFF17EDF18FBBB328C33AE75
-:10AF2000CE1E9883FCFD46D94B45983F227D36675F
-:10AF3000B873AFE24229340AF0521DC7EBD7963DF1
-:10AF400095827E98EA2A9E2FF654AECBC172C3F941
-:10AF500039C3DDFF8D12FB9EC1FB6C625D3FEFFDCF
-:10AF600090EEAFF92C9207A7E89BF021F91D984DC0
-:10AF700072A0EBCCE7CD52D0CF3DC9CBE350AB2C88
-:10AF8000AB92517E4DF79BCA319ED861197B04E389
-:10AF90000C6227548E47BA4EB230A22BF0794C2166
-:10AFA000FAB5AFFA2C230699CBA6E7738D8FEA3456
-:10AFB000FEAED6F331AC4F57E1F8CBCBDB91F818AE
-:10AFC000C6CFC0F6B3BFA5D73783FD45ACB7C8FE23
-:10AFD000479203F8132E1787E0E8A6759586D17D72
-:10AFE00039B8EE3AB4753706E13019FAE81E4FA6C3
-:10AFF000E429A20BAD133C16D24711706BF0A58368
-:10B000006C636597C2853F8A662F72081C8E441C4C
-:10B010009797433B2F8B1B820BC6BF1EE9C0D67090
-:10B0200078B64B4D5C6E88FD81E6CF68D0E6DBA339
-:10B030009F6F4514BFD7EE46BF13B6738D2DFA3AF6
-:10B04000B81B853E9D65F13D688639DCE49C4FFC6C
-:10B05000700B683427CCFF6FA9FE3AC447AB147855
-:10B06000B93F8BFCF114FF01F49E5118660768701C
-:10B0700045E2A3610479180977241E86E8D3978CEA
-:10B08000A9761F6E705E11F369B5F3F53A30DECC28
-:10B09000DFB550C01485FC9B5211C5A16870BD2955
-:10B0A00071BF6440E2F78F347B2212BEC87B7A1AEC
-:10B0B0005CE8EFE3700CACC23B820F166A7E3E4E3A
-:10B0C000AF24019FC9200D7B1EFE60A141F3B3EAAE
-:10B0D000E819797F4DC39B16E715892F2D4EEB920A
-:10B0E00073B78873E591EA4960A7A7C65D8A47ED03
-:10B0F000DC2E6ED04FC9FD4003F7DA490EC60DFABB
-:10B10000298F2968DF4FF21C52D02EAFAD81090084
-:10B110000DDE147E1F0DDF0F64F8B71492DEEE1FF4
-:10B120008FFE959F4C7D82CEAB3E30703F7D247E5E
-:10B13000F68C809F91F87D24F8A3D27C4FE2B8670B
-:10B14000A4BE0A2CECCC16E742CC9F85EBC1E9C823
-:10B15000AA44FF11C8D7AFBEC24D2B16015DCB3339
-:10B16000FDBFC076B730DF64A46F5C8DDFC8CF4908
-:10B1700018F9E1978BFDE364A177CF6FE3F11ED55A
-:10B18000DE518F4D44BBF198910569DD7B497FDE2F
-:10B1900025E03F0F2A3684F59FB193FE5DFCFA7CD3
-:10B1A0008AE328D86C187A4F03FE8E0A46E9DED36C
-:10B1B00028DE1BA7CB9776A7E8EA8FE9C9D6958F3B
-:10B1C0000D15E9CAC71D2BD3E5C7F75DA3AB7FD526
-:10B1D000F12A5DFEEAFE69BAFADF3A354397BF7697
-:10B1E000E0BBBAFA1F0FFA0F84DD10F0F615C2BCEF
-:10B1F0001788795F7F719EAEFD9F62A61C437E5CBF
-:10B20000B081C7A557028674EF8B7470FBA209FE4C
-:10B21000207D27B3018A076C084A9E10C3F836BD0B
-:10B22000FDB1B4A78BF078B9FBF805AEB90634B917
-:10B230004F170AFBE32A76158F67FD7ABAE6B3BC8F
-:10B24000BF8BAE66B79EAE56554FD7E8423D5DED1B
-:10B250001E3D5D6327E8E9EAF4EAE91A5FA3A76BFC
-:10B26000824F4FD7A4D97ABA26FBF5744D5DA2A7B9
-:10B270006B7A939EAE99CD7ABA6505EED4958F44DC
-:10B280006F4D9EE6B42FD7D51FA4BB6F09C537E518
-:10B2900075FC50D7BF46F700FC41BA17301187F94B
-:10B2A0003FA47BE1283DBD416F8D1A359EEC8D1288
-:10B2B0004C671708BBDE37BCBDA1C99F70FD1EBE21
-:10B2C000AF1D492E5DA2CFC43E77447D16B1CF7D20
-:10B2D0008F81BEA5413690DFEA56C19F87A338DE35
-:10B2E0003FC7A2ABA11ED4990070BD8770C338EFD1
-:10B2F0004515933FE2BBACDB88FDDFCEFA289DC34A
-:10B300000628F53307E9EF79CC43E902E63309FF74
-:10B31000C4F45109E8B7E8AF40FD7F61EE5B1FD090
-:10B32000B9D61BF157F40EC547787E92C7D849218C
-:10B330000F4EE0390AE4CF5A07F5ABEA0AC3DB49FE
-:10B34000E16F9C3749223DCDE4288AEF9A778B4400
-:10B35000E744F3FE93A78B46493C1E24226D6DD62D
-:10B36000F0C7F7473B47A904471AEB16F61CF3DB77
-:10B3700072A81F7EEEB1CB44FB58B785C3F7ACC4AF
-:10B38000940971741D8EE8EAB670789E35320BE22E
-:10B39000F369E65791180F2820A2F83D8C22E48F1C
-:10B3A00079FFF95636FAE9A2A25E98557D359ECB13
-:10B3B0000456919FFC7B4CEF27BFBD49223FF9F714
-:10B3C000004E48DD0E8F1BED7C2DFFB080B71AEBD1
-:10B3D000C1F7247793847EA97F587FFB7FC8EBFD5C
-:10B3E0009DFD0DF6C3385CF883F4D3FC9E85061EE4
-:10B3F00027317037DF1FEDFE1EE3FEBBE640650020
-:10B40000CF45653094308ECAC8EFC7EF1CC5FD9E8E
-:10B41000C9AC8FFC0BECA866D7FA49FE9688FB17DF
-:10B4200067C5B9E2A22E0BC3389D927D87E2F01C5E
-:10B430007111F0601FEA61C54FEFBF946C792D8EDA
-:10B44000FBFD8C4EBC57A9E9FF91F9546127C3EE6F
-:10B450003100DF350D677FBC5AC4E3035A5BFA46FF
-:10B46000E139A006CFFD2DC7282F2B1E86E797F8C0
-:10B470003E5478FCA3C905E561F24EB141FB303979
-:10B4800064B4F9E89195352D7D74BE6814EF58AD1C
-:10B490004D5BEEF087D989874609FBC71260B84F2C
-:10B4A000E02A0A53E524CAB5FF627C1F6D76433F4C
-:10B4B000E1F2F362020B3F1F686F394EF0AE91FC70
-:10B4C0007EECC49CCB4256A08F59C1BBC0F07DCB53
-:10B4D0000DC7308ECB645FEE09A923E3CDEC562E69
-:10B4E00084CBD3B723E4E94F5A068A719CD6967E63
-:10B4F0000D5F0CCF6B03C9DCBE6E6DF984BE1BC043
-:10B500003E447E7B754BC12115CA3F80BFF8DE8E5D
-:10B51000D9C5E162175DA457E7083E405F5C3AF089
-:10B52000CF07CD46E2B315E9363A2758F166DE215A
-:10B530002FAC67134C57FE06700F8DC3F16412F2E7
-:10B5400014F8C987F2C194A2D079419C6306D1E96D
-:10B55000EFED4FC3AFC9CAE89D2453BA8DEC822BDF
-:10B5600085F36FA3F83B4083F6C94517C9FF150261
-:10B570002FDABB4F1FDCC3C8DFB3E25EEE375C518E
-:10B58000CFE81E026B869F8A21BED1F44C02BE50CA
-:10B59000031F3B5A60C541170FB55898BF00EC1008
-:10B5A0008CDBCF19A2638757716288C1C66A571DA9
-:10B5B000A60F4D38D181E2EFE1895FF4618A67041B
-:10B5C00038BEA38905D13EA6B37F18DFB904F23097
-:10B5D0007E8C288FF1F37CAC288F9DCDF3E9DEE7DC
-:10B5E000A46A042CE23C2BDD16373517E5F402C6BD
-:10B5F000EF818B7720B60B7D916A8BABABC6F2DB0C
-:10B6000019DD0BD1CA7F2ACA936D1FB5E7A01E9919
-:10B61000A56FBF45E021C9F651C7243AF7D2976B11
-:10B62000E74A09B6F3C7A87D89BEFC51D1DE6E3B5F
-:10B63000DF3709CB73F5E33F28CAA36D5C1E321FC9
-:10B64000E3EF1588F20744B915CB717C0F2F97B53E
-:10B65000773944BD75020E8CA923BFEB28EE77DD48
-:10B66000D1622921BAB45C24FA3CD4C2287F6B5140
-:10B670001CC909430DC7779C8BF383A3990DFB4E1F
-:10B68000C1AD42AEC5A8FD5EEF30724F2B8F73F097
-:10B69000771864B789F8C96C137243ACC741B921F4
-:10B6A00035793893713FFDE5F81A16DA05B48F3213
-:10B6B000E007F93AED1E03F387C9CB946551CC1F1F
-:10B6C00056DFBD204E974FBC3D4557DF352B5B57AE
-:10B6D0006E2B2FD295B35971B46E960BFE8A2A2920
-:10B6E000D3956BEF43B0DDA29E58BFC6DC6B74F5FB
-:10B6F000CE17AAB1C8E327A782FEA178068F05E579
-:10B70000C3727B7612EA9FA75B2610729E85750531
-:10B71000462B7BC6C9E3DC9FC1F34328FF598B97B7
-:10B72000BEEF817215D25DB0EE54A8DFD5E2A0FC69
-:10B73000E32D6E4AB7B7A894FEB4A590CAB7B47803
-:10B7400028FF18F48FE9A3D00F7E7FA4A586F21BF3
-:10B750005B7C947FB86536E51F6CF153FA40CB12E1
-:10B76000FABEAEA589F26B5B9A29BDBF2540696B15
-:10B770004B3B6F57C4F5CC33E25EED3395FCBE7C9A
-:10B78000241D3B8B841F52C4ADD887E2563A8B30C0
-:10B790006EA5BB9FEC702D6E05E74DFD59F9FC239E
-:10B7A000FB7BAA88DB6F45AC6F55345FCF743E9C42
-:10B7B000D7E3591D0D7C9FDAC4E990D53340E5C924
-:10B7C0004B382D9E12FCC95C01965641510254EF34
-:10B7D000ACD45715CDCFD529CE91B9619E15E2FDD8
-:10B7E0002662BBA001E1522670FDA9D17570DE4E24
-:10B7F0000E27CE7F3878F70B78E5F26EFE2E4B4D94
-:10B800004708D93ECADB44EFB25866FB420AA42E71
-:10B810009F9FDE8928BA38053667206F2E5EC75491
-:10B8200048D396E9F76D290BCA74FB22F9E2434C21
-:10B830000539602BD1EFAFA27297EBDA59D27EA80F
-:10B840002B37B956EBCAE7DD95B5C68DF84CE5E761
-:10B850004BE60DAB5832C0B5B07323C1F59198C714
-:10B860005949A5FBE5817D5ABC05DF5F3C29F40BF6
-:10B87000B36C207BACC0C9B3F9B10103EA874FFFB9
-:10B880003596E4D2138F1B82E84706F164C0F55F5A
-:10B890000C661F9697B27ECA63A80CE6C73255C6DF
-:10B8A000FC383640FB2BD85FBC5F8471ABB2FF71B4
-:10B8B0002BE4CFA4FB9FE4717321D29FF9829EF900
-:10B8C000DA7E6AB312E95FEE2F22FF8DFE7E5D9B6A
-:10B8D000D85FB459B99F6E95B32209EDD6B323C48E
-:10B8E00039DADDAF1E5D00F8B6271FA274D02FA78E
-:10B8F0001A86BD3FFE4504FF8F026617FCFF05F266
-:10B90000FF99F2B713D10DD5903B40EBE0ACE47555
-:10B91000CF45FCBE2E737E841D17CE4F11F855F611
-:10B9200055BAE7021E9537733C013634CE132DC746
-:10B9300073300E41CBE78B38DDBD2DC9B9D561DF42
-:10B94000D5624EC742D65783FAAAB0C4E00962C78F
-:10B950005E87CE8F61CDEDF0E27B084A19F3A098A7
-:10B960001BC53A56A3EE56FE26539C9572F86AA65E
-:10B97000C27EC6660B318C4BD3FA65C21F728F90A4
-:10B980009B5F38AA63E99DCB9441F9873A927D6128
-:10B99000F3F6211F7DD169E4F33AAC2F2FB471BFC8
-:10B9A000E1A242535095F05DB50E7AC751D921B14D
-:10B9B000B42C846312E1811D8C263E8CDE3C9A05FA
-:10B9C00060BD943BFD9662F4DB85D483861CC193F5
-:10B9D00050AFBED8B413EDB302C48B0DF1726B6ED1
-:10B9E000350E9D5B48F85D28E63DBE98D3AB2D3DF6
-:10B9F000021EE6F1E27BA78B3A353F8E7E9E0F96C4
-:10BA0000577D07DF856CED93B95A8BC0E77A63DF0A
-:10BA1000E8B9D0F5997E804B2638C717A30DBAB97F
-:10BA20008205488FF3F9D53F2EB1AD5924976A4866
-:10BA30008F8F37B0F0F3532D9D58CCE5EFB1221E18
-:10BA4000876A771F257E1CCA1F39BA00F0F1B481BE
-:10BA500015D2B9B181EF8FB5781D19FD0078AFA16E
-:10BA600058C845D6C6A6A1DE761A28FE54EE8AA28C
-:10BA70007BB3B253A1B8F7365BB5E34EECC7A1D0A8
-:10BA800039D11479621FDAD166A7611CDAE14776F1
-:10BA9000FEB00FE386E47485A1DFABCDA1703B243B
-:10BAA000CD40F1808AB3DA82E74AF9B6139588CFA0
-:10BAB000435D3FA07722E4EF8B981DE117330A9294
-:10BAC000B5B126EA3F90A688F766BCB56313C59169
-:10BAD000888AFBA19A4F70BF7DC471DE8AFB02D5B4
-:10BAE000B688FC81F715F37DA211CF0F21FFF8CAAC
-:10BAF000F34E945FAF77AD89CB427B3AA8902D523D
-:10BB0000F8D7D6147A0FA1CB44EF356878CD0C283E
-:10BB1000BA73C8F4667DDE1C711E698CB827B75CE9
-:10BB20008C8F2797A1B0F918DD7CFFC65C36DAFF51
-:10BB3000DC572CDEE914F97B447EAF3190E201FC46
-:10BB40001CEE5A9489F3BAF0829FE2CE47B2FF27E7
-:10BB500015AB62BC80D540EF0287AC1887BEBB85B1
-:10BB600079D0CEB30415BA07B047C8B35C1BE7FF62
-:10BB70003B4AF87A8D4C733BF8BA539E890A4623A8
-:10BB8000DD1CDD650158E7C5AF4E652AE8C15C875D
-:10BB9000D780FEF7DC669307EDCF29BFB0119F9CDD
-:10BBA000B7F1382EA5F90115BFB7EEAC2854C3E0A4
-:10BBB0000EB6383C289F76B6583C181B1F1C41BE59
-:10BBC000E6380D143FAF1A783CE72EB11E7715F317
-:10BBD000F788760A39B34B09CC403877013D316E8E
-:10BBE000FFD0066E1F2F5F65213896BF9E43F6D5A6
-:10BBF00048787BA2C5EDC94578361852D05F55B953
-:10BC00002E773DBEDFB1DCCEDF3796638B1EC3AB34
-:10BC100011ECD74686F67C6BCC359EF961F25D8ED1
-:10BC20009D58887C25CB8114F4E7F43C7DE1268C7B
-:10BC3000E705FA6DC57CA8F8839B307E77AF3D9011
-:10BC400082F1BDC78A3FE2E50981AD18DFDB577C91
-:10BC50009297A707520C903F5E7C9A97E705B662D1
-:10BC6000BEBFF82CCFE3D91BC8CE53C5E76F0AA0DF
-:10BC7000BFC5E4598202F9E7007F092CB16E919E9D
-:10BC80001678D1CA9FC3EFB001DB2FD2C8F283A2CE
-:10BC90005DCF08E52F8AF2DE11FA7F45B40B8DD017
-:10BCA000FEB068776484F64745BB632394FF4A94EB
-:10BCB000BF3142FFFF2EDAF58DD0FE6DD1EEDD11E2
-:10BCC000DAFF56B43B3E42F9FBA2FC3F22FAFF40AA
-:10BCD000D4EF17DFB3ED1BDE47FF7D36C811944B61
-:10BCE00085F60D71B8CE77B69713FFB756F0732A65
-:10BCF0008DDFB32546EF0EDF56C2DF3BBBAD84CBF5
-:10BD000071A584F339F0E1C3C877CBDF94299EA8ED
-:10BD1000D5E039154439BADE40F6C0F2D7F97E7D58
-:10BD2000F93A25187E1F486BAFC1BF06E103C66D07
-:10BD3000C314D6DB97C5FC9CD1EC767B6AC3E4992F
-:10BD4000D1A1CF83BC602877417E53DC78E1BAAAC9
-:10BD5000F6C2723CEB339005A2D45B42F88E886247
-:10BD6000177AC151DE5188F0D9147A3F4193F3CC50
-:10BD7000E6D6F935DA6C0ABD2727DB79F9945F4CF2
-:10BD800074A09DD5C6FC7D5E6CEF56C88E3FD45E18
-:10BD9000E640B967B22F70E0FAFDB894E3BDBAA1EE
-:10BDA000300AE5B5FCA081E4F711075FEF3BDC3C0E
-:10BDB000CE0AF40ADDAF0279ED411D51C042AB500D
-:10BDC0006EEE7DE8E05CEEE763F6B115747F493B0B
-:10BDD000579794B07D406D09C74FA6D0230AEA1744
-:10BDE0004877958B7B3701EE8FCA54983B35ECFE34
-:10BDF000706D89CCEF3D69E7A1722DBDAB95B15255
-:10BE0000D19D23A4DDA3CF9B22F48612A15772DA21
-:10BE1000414EEACE4F1CBAFCB74A849FC7C33C6868
-:10BE2000C74EF9C5069287E751BF4923CBBD41F9FB
-:10BE30002BE4F12E4400CAD100BFDF7E6843D9AFA6
-:10BE400090DECBD719E83DEB2B95A30AE218F090D2
-:10BE5000E797482FC0845270DF74393CE4197D7134
-:10BE6000F4DEC765F091F768791CCADB3CBF42FD80
-:10BE70005FA2372E83AF6725CF713FD2D11925EC52
-:10BE80006A6000F4DBC54575E1F9BE49F853B43882
-:10BE9000652549E1EFF58B7BB2B2E0E3FB99578D65
-:10BEA000CBC1F78A9AC8BFBF62DF3D6EB4DBD71A39
-:10BEB000FC0ECC1F8B9B3680E32C874D3FE26F2F0F
-:10BEC000F641EF72BE7D33FA4DBA8326ED5DCD109B
-:10BED000FEB30FE38FB4773BDD64AF897CD5CDD55E
-:10BEE00030DF6EC5518C266847C9E44D46B049F72E
-:10BEF00099D8607DBCEFF7F41183E8EFC64DD520EB
-:10BF000097F64531DDBBA5FBD0CF4EF9E99BF09DFF
-:10BF10005218EF4619F6663B9F99B5C976F5103C65
-:10BF2000BB9FFDEEA655E8B013FB1427E3EFCD9FB2
-:10BF300051FB6390B4B05F595F82FBF5AE1389E1AA
-:10BF4000FB75AD7EACA8DFD03BD0F08C4AF53B4A08
-:10BF5000801FEA7B06624A08DF0315E1F563841F50
-:10BF600020ACFEA6AFAB5FA8C1F3CCDB3797F0FAED
-:10BF7000DBB0FE59B53F91627A22E089BFB4FF9DE4
-:10BF800004FF08FD1789FA67426F53FDB3AC3FB158
-:10BF9000348BDA3D85E39C7BE3ED0A31EF443CC70B
-:10BFA00079D7E6FD197E6FC13E707FA734A9F8BD31
-:10BFB000DBD2E140FBCD6AECF0A11CCEC5F7C72671
-:10BFC0000CA5CFA2F2187FE9F7487EEEB6B0F85A7A
-:10BFD000E4D76603ED6F7AFA0D0F205FEE489BE819
-:10BFE000C0FDF33E535F5909DAAF076C64BF1A32E4
-:10BFF0003FB5A2DFDC5CC0D7BFD5D9E42981BC3511
-:10C00000BD84DE0F95EF5DDE4DEF98DFC7DFF752A1
-:10C010007E6CF2EF46FE0A2D2F5C18B6BE7797F2C3
-:10C020007B96EB5EB36DC0FDC13AA3A7A300ED7094
-:10C03000BB42719FCA8F0F4E23FBF0E70646F21FEB
-:10C04000E65905FDB6CD55E8F7300C94CEEB2B2123
-:10C050007CF87C55502F234191F07ED0FD8ACF8211
-:10C06000E71D6661D7EDF0F0FB61DAB81784FD7962
-:10C07000A184BFB7B623EDC27B8B5DF8FE8389EE4A
-:10C0800075DA961942A618BCE7B6F3D462A46774B1
-:10C09000FF3ABCE71C95A238707E3FAD85323A97D7
-:10C0A000EBA6EF817A03ED1BE29719BCE87F8CCAFF
-:10C0B00035E9FC1D361827DC1F1233DAFF47A4E7E9
-:10C0C000B837951B11CFEEBB0DF43EEA83EE772D0A
-:10C0D000068033A65CDFDE3151DF3EAE5A5FEEAA4A
-:10C0E000D59727CED297BB6F3745F875F4F9268DD3
-:10C0F000AF4026D8404F45F1221665BBD082FB9E4B
-:10C10000B5AF4531A2CFCA4D1D05B83EA307085FA4
-:10C11000514551E417589B6C22B9BEB694FBF50FFC
-:10C12000A79B6EA43CCC0BF96347DA51DA8F5C8293
-:10C1300017DBA9BF62FF3616F61DFDF2A3BD9652AE
-:10C140001E57C3DC15E8C763240F9F95BC9E438828
-:10C15000EFB7B8BF624733F7633F388BC741D20CA4
-:10C160002A70BDF3FA31960D7DB82F8BB1B5DF8DF6
-:10C17000F19D91784D14E70D3BF0762FF29D9FBF16
-:10C180001BBD46BB6785DF2BE8D604BD8B366BB481
-:10C1900078EF4FD809B1EEF892B6B0FB1A89C26FAA
-:10C1A000F2F0C47956D41FFBC43B2283FDA9342886
-:10C1B0000F79457F54A9E6AFE1ED3769E73C229F4F
-:10C1C000E0E4F97D47E26EC4F5B569565C19EEF717
-:10C1D000D70AFB2E36CDE41D05F37AE49829208D8D
-:10C1E00081BCC28E18C12ED817C7C735BD1E15C059
-:10C1F0007B818FB8CBE99E61AD80FBB94ACF3BB85C
-:10C20000DE07601DED84FE1F7179AC65E2DC340051
-:10C21000F051A8159828876ACB68BFFB88D763457B
-:10C22000BDF9489AC78A71DAD664C581716B716E9F
-:10C2300085DE897BC4E277A0FD13078AD484E749B1
-:10C24000E91D53E97E1DE0DA50C18F1A98886FC44A
-:10C25000F8C27881CF1DEE050E7C97C195BBFF5FBC
-:10C26000D04F1F8FFDC5F0768827A7C0D3AC52955D
-:10C27000E07689FEE3173C47F5F1A7AD22AC3F41DC
-:10C2800047D35416C47D9A36BED6CF60FFCC4BE759
-:10C29000006B7EC5F1B62A9DBF8F65BA8BD17EEE4D
-:10C2A000B94AFF5EE4B381E428927729EE942AE448
-:10C2B000A394635B67E0BD8B35BF8AE2E32CE4FCAB
-:10C2C0009EA230CB7538EF04BF03F118B95E938F8F
-:10C2D00074D421536A74895CBFC90A6B97E32E5DDD
-:10C2E000C7C96E5755FEE861D673C47A493E36F029
-:10C2F0007DEC3F725D6F8FFE602CD72361DFE5CB55
-:10C30000E7DBA4FE75248793155A67E911E3E13B47
-:10C310007B98979841C5B8E8DDA54EC1C7A0974A5C
-:10C3200091EF1D936CFCBC9DF8ABEAF90DDFFD3578
-:10C33000E42FE0EFF3815AA9C73AFA482FF6F80B39
-:10C34000B0FE36C5FF38FAD3B71D4FA2F72BCDD1BB
-:10C35000FCFD5153C47B299ABED85DCAFD486AC40E
-:10C36000BB9BDF34ED4E4B2B7678B0BFB77F6B496C
-:10C37000F8C7DB3F6947BA57D9604D3F5372F32680
-:10C38000BCFF6C7D93973F0DF980827859467E976C
-:10C39000C31977D2FC5BDF33933FAB54F66CC63CDA
-:10C3A000FBBD95FC717B0F4C9C8DEBA4D55EA1A2CF
-:10C3B000BD7F40ACE37F1569E4BC6493C78FF64052
-:10C3C000E4F7674B35FF9BE77817D0B7749789DEA2
-:10C3D000711A8C8FE8B2F2785461872E10F26CC11A
-:10C3E000C1F5198718BEC351F75A29B45F60AF4E23
-:10C3F0004478522F4ACC0FF26F9B389F4D753D27E2
-:10C40000A19C49731DA944799FCEFA56A1DC486FBF
-:10C41000D29F97A55E54A8DDBE142FF5873F18075D
-:10C420006A62624DC7F9D92A94F329FCBCC5E48835
-:10C43000E271A1EE6ADD3D6AED7DDBB7851C350159
-:10C440004E8D6590DA147E6F3FA2FEEF443D19FDDC
-:10C45000F6E8FC771C3D4EFDDA944FC3E34D715F67
-:10C460004A426B193FFF043C05701FCA62E3F8792A
-:10C47000A9D7AB86C7DFA682DC359761FC4980E28D
-:10C480004492C5BD082DAE0730E044BF9B16F7B1FE
-:10C4900093E9ED112DD5F6E7B9CD32ED3B8A5FB5C5
-:10C4A000F2FD413B0B5A25F48731923BB91BF8F959
-:10C4B000B4E617BB0D1713EA257C0F97C6EBA63819
-:10C4C0006ACDAE02FA92DC5917F1CE94F68EB661BF
-:10C4D00034E78B6D2D0EA2A3569EE68FA4A3FE9C7F
-:10C4E00053AB977A3195F9E3C3FB0D527FA9CDFB8E
-:10C4F000891F522F6650F9B616F532FD678FD07F2F
-:10C5000032F1CBC8FDA751F9F6D0BBCEE9808A9FA6
-:10C510000EEC77FA54942BA1A99E61F09C7A8F5E61
-:10C520004E8EE9D1CB5D0D2FDB14AFAB0EF0BDED20
-:10C530001E83A78B61FCA9BE5E4DD66F9CFC5D6B14
-:10C54000AD7EC83513EB2FE3F5BF754A5FDF577932
-:10C5500020B23EC177FD457DBD48FA44C20B70252F
-:10C56000DC1406D7248BFEF7DACD9E7B095C09B775
-:10C5700084C175835B5FDFBF6A78B86E2C347F2D12
-:10C580005C5ABDEF4CB8B27A91F39859631E01EF33
-:10C59000BCFE2DB3AFACDFDB967C7DBD3B9A23C7E1
-:10C5A000096871DB3A7B24BE99DBEF0E36407126B9
-:10C5B0009ADD11C71C22FE8BDB0DEFE07F93197B08
-:10C5C00060B46FCEE804C4BFF7F64755BC1FC3F58F
-:10C5D00015ABE5EF56C2BEA434FC5DEE21B8565350
-:10C5E000BF2F61BC13E9598B07EDCEE25466494673
-:10C5F000E3CB1DCCC6F7C7EA476BF29AC79717097A
-:10C60000DC3D9BD2BDDC49EB3C1887F07CD371EF5D
-:10C610001DEDBD67F4F8A1FA23F95B343C994CDDBC
-:10C62000F47B1D06EA6D1ED40FEF6211B4DB75B307
-:10C63000398476B516877A3C7ACED10495DE3D589A
-:10C640008DFDCFBE65EA1ACC4B87E3D5E536BC3706
-:10C65000D5AFDD2F5D83785B66F167261AE87CB580
-:10C6600000F7C3CC172F2E23FB4A878BD3D0E0A92A
-:10C670009638FEA3D2FC0FE338D586BE1D3EFCA63D
-:10C68000F4F17DB62381BFBB84EFEB0CB3FE353CE8
-:10C6900054897E0E193D5F0EC0FC0E6D8CA57BF893
-:10C6A0000BE26F99836FB22C34F812F1003D0CEE5F
-:10C6B000ED04B76D6E6632C26D14705B1204DEBDA0
-:10C6C000B95F07F760BCCC7D92F67E3AE59F0F38E4
-:10C6D000E9BEBBD9F0F9BB33510F971A3C68776EAE
-:10C6E00003FB02DF77FB3F02DFDBF18C258EBED33D
-:10C6F000BB6F6E71EFCBBDC940EFBCF8AA5E203AAC
-:10C70000ED6AB07970DF3E97A9F4EEEA7C710FE62E
-:10C710000F95FFFD723FCCEFA5D1FE83388F3BE232
-:10C720000D19EF121CFE627A476BE295C5CF6AE7DE
-:10C73000F033847DB050E07126F352DCEE4DCC6FC7
-:10C74000C471DF3E6BF2A25DFAB68847BE8505E88C
-:10C75000FBAD2C48E96D2C44F5BF872FCA42FEADD6
-:10C76000E8D1E9CD005FDD630579B81EC3F0FE06B0
-:10C77000D219F8E50E17E7973F2621DE3B13AE8866
-:10C780007FEB248EBF0746FB7FC3D7ABEAF2204C7A
-:10C790008E4969E847195C3FD5099CFF1447DED7ED
-:10C7A000AD9FBEF3DA7D7FAF2DB902DFFBE23F37ED
-:10C7B00078EFA278718CCB77011DFA547ECF11C42B
-:10C7C000863D0074AAA994296E6FED67E27E363A21
-:10C7D00031A0DE2FC7CAF43E99762E395DF4373D7D
-:10C7E0008DDF57ACAD9CD9160B7899F2657F79082F
-:10C7F000D29A34FDFDC5A9AE2E7AD27C5AAEFEFB8C
-:10C800008DAC830E886B4BF471E6D323FC9F87704D
-:10C810006CE0AB8BA345BC64112B0ABF6FF01DD13C
-:10C82000F67CEDE7A673307EC918FF57488FE5DF29
-:10C83000FEC31CDAD729ECCD7130BF867F97C99E25
-:10C84000FCA80566528071D516E60583FF24D8152D
-:10C85000983FD5E2A6F434D801987EDA5248E567CD
-:10C860005B3C949F35C6671903FDCE6BFF4C417D41
-:10C87000B4568BC716706871856B45FCC40AFBF211
-:10C88000E318BFB08202DE192CF68E2908FE9D3D0A
-:10C89000DD473185EF32EE43566C94C8AFB3F08874
-:10C8A0007F0D9279F11BFDD3514C8CFFCD8944DC77
-:10C8B000A7D7A31D0BACBF22CE9B340658C0DBFB11
-:10C8C000E1D178A8FFC7960904DF272D5E82EF4FDC
-:10C8D0002D3594D68FF1A5533DF619BDF3F4ED67D0
-:10C8E0003E54F0F7B34DF64AE4BFBFCECB8241C011
-:10C8F000EB662397EF9B41BEE3FAAC2C9DB1FD1E86
-:10C9000086F2D75F80F3BC296EFEE478F83E7DC2E4
-:10C910005C05EBDDF225E8A0AC213EBC1C5F9F79F5
-:10C920004522FC9C79C549F8D0F0542FE875E660A3
-:10C93000F177F0DDB3578EC9147F7AFEA281E03B18
-:10C940007F3C8AE25323DB2F3F909384F6D89F806D
-:10C950007E78F0B1FC4031F9E3FFF4ECBFA8E1715F
-:10C96000BF7F8AEBBEF03ECAA9FFCBE514D89B2758
-:10C97000B7A21C4B4BA1F77B06E3D5585334EAB161
-:10C980000693585F206730FFA728BE0FAEF8796A7C
-:10C9900015AE171C0FE3BDCCE2F760407F1FFC1003
-:10C9A000FA3BB8D54DEFFD7CBAEFB16C1C7F6FF749
-:10C9B000C2F7B742FF6782FCF7609C61DD675F44A6
-:10C9C00079BADB467ECBB512C085FA744F0AE50B07
-:10C9D0002525AA999C19411E8722A90ABE7FB6EC7B
-:10C9E000B92D29C85F784F1DE3EA5FDA184D72EA66
-:10C9F00025A3E78366EC6F3BEFEFC987EEFDA80741
-:10CA0000D307EBCBEE45393786C7312EF8C9D22292
-:10CA10006C0FFA9A7EDFF3D3CF4B21F48394761E0A
-:10CA20005A8D714C63B67D68488174EC6EA915D33C
-:10CA3000E2F469C7D07F70D71895DA8F7B264BC692
-:10CA4000D8F4A294E0FBD7F3B8119D7E2FE9FCAC9B
-:10CA50000AB7999A9E2F92BA4F77E1BE38E37819B8
-:10CA6000BFDFC5DFAF3ED03BF39DDB18CE032C0804
-:10CA7000847BAE89E22E5830D085743EE32FF4D00B
-:10CA8000BB2ABEC016E4AF33FE44BA5F78D010882C
-:10CA9000C1DFE314F880FFBEA1E777BF1583F1146F
-:10CAA000B1FB8D0C7F2F76FDD88129141F92AED259
-:10CAB0007E3C7DC70D35889F86FD07BAA89F651609
-:10CAC0000FFA63971CF89CEEBDB0A93C0EF5CC7E26
-:10CAD0009E7FA0DA4BEF9D2FE9FA33CFF7F928EFCD
-:10CAE000930359747F623EB7771E13FA8CF58F66F5
-:10CAF000E1EF2169F47A008AB17C73562019DFBD19
-:10CB0000D2F420E8AF8770FDA1DB91DA3B66F27BBF
-:10CB1000F257A8BF4C421F69FD3D66E2EFF4A21830
-:10CB2000C1DF8BB3CDC4F5EE1E9037C82F9ADE85DA
-:10CB30007177E0BA3589FB32A9A064C7C27C521F65
-:10CB40003373F97D85E347DE67D5EC90D9F1AD7499
-:10CB50006FF5D354FFCF701CEDFE2A533CF4AEE0CA
-:10CB6000EF53BD4F8F49E0EF75E01C402FFE02F3FD
-:10CB70000D32D85139617694E5CAF4E2DF52BD072F
-:10CB8000709C2BAD1F2987270AF857D80D8487156D
-:10CB90008F9AC91F3651DC439D78FE7834CA9315AD
-:10CBA0007F2E23B9D2CAD8B0F879B985C779FF1BCF
-:10CBB000FA1120BDF68B7E99F623470CCB8E827E30
-:10CBC0002510C87F38D01A5B4E792F92FBBA2F0CF4
-:10CBD000C3EE17B514E8F52EC9E92FF5FE87EBBFB4
-:10CBE00074D0EFCD64B6B82B9AF7D0FB3EFAF96B50
-:10CBF000EF6CC1FCFA51BFAFF8CC40FCBBE2B332E2
-:10CC0000929BBD57385FABCB7B12E18C9C0FC0FF72
-:10CC100029D22712FE417E1FB832F8BF2F31FA7D8C
-:10CC200043A0AEC8BFDD2BDE31E85D5A42EF691C80
-:10CC3000C4F748506ECEE0F78E7AC5FDE4DE0407F7
-:10CC4000BDF7F19291E703B78AF6E27DC8DE5B5348
-:10CC5000F87B1DE6A65F9762FFAD3C3EAED718A4F9
-:10CC6000DF53FBFF00D94A3097008000000000002E
-:10CC70001F8B080000000000000BE57D7B7CD4C505
-:10CC8000D5F7FCF696DD64936C42C88590B0B91078
-:10CC90008206DCDCB806582041B468038802C6B8B6
-:10CCA0002101426E844BFBC4969AC500A2C51A1E90
-:10CCB00011D1A22E14282ADA50115183CF0A4269C9
-:10CCC000BDA5D5FAD86A692278E59210B40FF6E1CD
-:10CCD0006DDFF99E99C9EE6F49D4F67DFAC7F379F5
-:10CCE000E347C7F9CDFD9C33E79C3967CE6CFB8FDA
-:10CCF00006B9BC4EC68CD6B939A7F3197BCF67F0FD
-:10CD00009AA3196BD1FCB71A0B18F35EB0B0DD69AA
-:10CD10008C6D89F1272FE7F92DCBAEA2FAEF3136D2
-:10CD2000B32D07DFDD49B13C3DF837E3EDA5769E35
-:10CD3000CFE5799EBEA4B1F9543EDB9D14C3F30B3D
-:10CD4000C3A346B36B787E876FF7D6387CCFA67EB9
-:10CD500086185923D54B13FDFCD12CDAFD81F1BF88
-:10CD600024C61E3533AF2D96B1F1AE45C35D858C1B
-:10CD7000796E8C30B16814BA93343E9F47AA86B35B
-:10CD80007B359E6D7D88B178C6E65B19FDA9F150B3
-:10CD9000D13A86B179E2335BB078B7CDC3E733AF30
-:10CDA000DAD6A58DE6EBA8BE2BD2C9C79BE731FA30
-:10CDB000C3A278859B4ADC9DD9A2EEDFD331AE9B1E
-:10CDC000C66555837886A7267F25E3E3BEDC6365C9
-:10CDD000F772B8FC1D7F5302298718638319FBD4AF
-:10CDE00026C6AF6F9BFAC069D51FFFB7DA62DFA80E
-:10CDF00045A33CD5C7F8F8FB87780AD0FFF243D7A4
-:10CE00003D70DA1AA857B5B8248B1902E3868E1341
-:10CE10003A5E0BF0C6C71B063CF2262DBCC000FCD8
-:10CE2000B5D97CC01F33F5FC6129CFB7CCBFCA751B
-:10CE30002FCFCE9C63756B1C0FBD07C27C611ABEE1
-:10CE400087BBB1AE96C3913E03CFDFAE09F8B7689A
-:10CE50008CBE7BF79B7DBBF9B73A8BEF893DBC5D00
-:10CE6000DDCB235D7C6476D0C2FF83F21723447947
-:10CE7000943B6D7D01CA1308BF2F999DD154FE6B61
-:10CE800023A3F2707F560C877753A2678E8BCF7BDC
-:10CE90004818C7BF1DFD8AEF2725FD9DE4DD02BFB1
-:10CEA000DEC648EA97C9BCE787837CF7D27ADC49BB
-:10CEB0008B915F7535ADC78379F079B1068DD67BDF
-:10CEC000D2E1BB278B979F6C1F4CF38893F470B211
-:10CED000F42F6F8CE5F54E1E32BAD0E7074D46BFF2
-:10CEE000250AE5021FDA1C6BD636DEEED48B91AE36
-:10CEF000305E5E767FEDEBF85E7657FD2C4A6BD6A2
-:10CF0000DCC878FDCEBBDE4FF5E45C898FB23ADE3B
-:10CF10002A088F77BADCF5C0EF232E4F23D6BB3C0F
-:10CF2000A77309E37475DED2F1183332F6EE50CFF1
-:10CF30002A7CEF7EE1933DF8CEF194553A8A2FC3D7
-:10CF4000C4E904F4DB399AE87AB9A4DFF45CCF1DB4
-:10CF5000E88FC3B19C65301691D361C13CD89AC1AA
-:10CF6000DF8A4E3E6FDF7D50E3E3D486B737506AE9
-:10CF7000F48D463F67347F94964170F460FF9D7551
-:10CF8000F8A3800F8F81E7397E6AF7EAD7853F13D0
-:10CF90009F572DFE87B7AB6D33BA6DD83FCC67C1B5
-:10CFA000FC6B9925503F4DEC43D001EF6727ED57BF
-:10CFB000FB07E53FE478A8796264DEBD1C3FB5312C
-:10CFC000877E3291EAF1766ABF18AFCCABF55C3957
-:10CFD0001FB1BEB3721F9CE55FCCA09F7D6182FE36
-:10CFE00099A08FF34F2449FA11747BFE89113ECC2E
-:10CFF000275EEE9BF39AD7108E763F62AEDD7C5EA5
-:10D00000CCD53666F628CCBE6DCC9C48C6B64ABE9A
-:10D01000563BA86D0CF895E25FCCDA367A362F676E
-:10D02000D96DA3E78C0AF03F56DA9645DF7D6D593E
-:10D03000687FD0C0AA014F359F9AA79277103CAC69
-:10D0400062BFD63C7535C1478DD3023E027E0C7E51
-:10D050001175E5BA5F766962FF478E49005F1B086C
-:10D06000FFD9898372C04ACE2FB0DCEEE6FD8ED8A0
-:10D0700066D1F5A3EA8DF4E9BFFF0AFD737A1B16AA
-:10D0800082CF21C69E57C2F87CD9CF389CD895E371
-:10D09000BD29DB3DF9641FFE8C029F8C3915DD38FC
-:10D0A000094E024F7FB0283CAD4EE6FCBA1630491F
-:10D0B0000FC0EB60AE271972E53CF29037313CCFE0
-:10D0C000D306097F9557700FA5BFBBFEB024B99357
-:10D0D000B7FF6F9781E6150AD7B51C7E286F31B36D
-:10D0E000DB4B79FBCF9B4F649C3607D6F371B3DBE8
-:10D0F000CD454D5F7EC9B65C2BF6DDD2EDB9D64588
-:10D1000041706FD99B7FC2C9F17A76AF0923B116FE
-:10D1100093EF2713E2F0DDD8E665546E75F3FA67F6
-:10D12000ED47DE44BD25DB63F28CCE40FBA5DB4A38
-:10D13000DC5541F0BF7AAF1E1FA3DAF4F96B0EE99C
-:10D14000F3E65C46F4F08FB6CBF5EBF3F927F4F990
-:10D150004FDE597D33B6C1F3E3C4BEF9D417E9B34A
-:10D1600072B856BF3FE304E4E8A7079F8F02BE6A88
-:10D17000FF54753C99611D7A3AE578D44C7CBDDE4C
-:10D180003D1AD1CB325FE8FE957CE38A7DBD96F0F7
-:10D19000859D154C37A1F83DC3DA6E7673FAAA6BFC
-:10D1A0007A3B037A4CF52C4EC890DF6D9B2DCC7EDC
-:10D1B000E57803F10F66773B19A7BF8A71A26C422D
-:10D1C000D374768AF7C736FD7606F66BC58F35D2EF
-:10D1D000372A9E1DF12AE8A66BFF82EB29BD79262E
-:10D1E000C1A192B92DE0874BDB357F24CF3BC639F7
-:10D1F0000F75F2768B7D9A0BF35EB42E2CC0CFF8B0
-:10D20000BF559B42E6B125A89CCF7FE9A157BED26E
-:10D2100078FFD5DBF5ED967178417ED4ECFA7B583A
-:10D22000F077AE0811BC26B4EF3062DD8BE5FC95DB
-:10D23000FC63DEC90CEB9B209AB0D3F80F971B96CA
-:10D24000619EE2DCC2801C9CB045B4E78CAF02EB6F
-:10D25000AEB75B9C5877BD95F923F87C4E445ADCF9
-:10D260000EFEFDE2B648D21F968431AF358F52666E
-:10D27000CB433B5734DA7DFC9691F4A47ACE7BA85D
-:10D280009FC7355F0BFA316A22FF33915FC6FCB44A
-:10D290001ED08D3B789D3E7D9EB50E22BDA4CEE472
-:10D2A0007F0570A9619D046FC6F1E95670E470AB0B
-:10D2B000E3EB7C2F16FA97BEFD72D646F5971FFA60
-:10D2C0007B58F077AE67322BAFBF3D9CA7347F1FF2
-:10D2D000C1D168616E039FA7F1CE709F97F490D281
-:10D2E00070D0A959EACB5BEE716761DEEB357796BA
-:10D2F000037C6CB3CD053EB6708790435B62B8FE8D
-:10D300001A477A33B55F087D0A7ACA02C1EFB6C4FC
-:10D31000B4F9C1F7B73C9826F4A9BF19092E3DF717
-:10D32000D97C3B35E8D342EFD9B27904B507BF24A5
-:10D330007DEABE48D17EB680EB96C10E9F97E7FF8F
-:10D3400088292641CF766759A91DD7D3D202724AC0
-:10D35000E9D33F1BE6B90BF856EB55FA37ABFE762F
-:10D36000FAE66E293F7B36F379F2FE4F6BA5C70DC7
-:10D3700041FAF003B982FF8F99E6DE23EBB950AF93
-:10D38000CA30FBDE297CBE555B0DCE96B400DC991D
-:10D39000DB9D05389FDE6CCB039D8D99C6E83C7103
-:10D3A0003257F0F38802E6F6F174BBEC777BAE41BE
-:10D3B00097268673FAE3FD9C2EF19B81DFC882528B
-:10D3C0000BE42197E1C4CF43D7B13757C8CD2A4BDF
-:10D3D000E96F26F5339F3E3A28167ACBE915DA4EE7
-:10D3E000312F81E731FF6E73B5D0BAC5FC14DC393B
-:10D3F000DD1492BC977C2BA68F4E7C4FD8386A37B1
-:10D400002B7D1AF8D7747442F0DC72DF28C2E34235
-:10D410008967769F4DD209637F45798993CABFE9B1
-:10D42000BCA5D6C9E980CA39BEFDC077E8794BE111
-:10D430009B997C85A59103E37BD1B898311A077538
-:10D44000B28979C3385C20F3082EF7987C77F1F91C
-:10D450000C3509F8A798047D71EEEC0DCFA3FA6E98
-:10D460000BCF573CB094B979FD8A64E6D2447D165F
-:10D470008DFABC1B234F2133D0AE225AF45B91C0EE
-:10D480007C7749BD1FFC2A13693AF5EB36C48AF64E
-:10D490005179D4DE6B10EDDD269E0ECB10FBA56717
-:10D4A0007D18ED9F8ABB53B24007B3A6E9E9203F40
-:10D4B0004FD08D4A1FCF734A39E34AC4FE5EB46E23
-:10D4C00024C98D165B69FD73C0D7D311A40F566CA8
-:10D4D000B8ED8642CCEF9941D070D8E737EE1F0304
-:10D4E0007A5BB46EC1F77E8FF3C85E1B7D6FCFF39E
-:10D4F0009CCF85BEAD39CB9FE31F16CD3B6A49E477
-:10D50000ED3D6DB3CFBDC8D31BBDFBDF845E70E3C3
-:10D510004D46AA7F236BFBCB1FC117D689716EF0D6
-:10D520005E3025F2FE6E28D218CABB6C8ED4157CF4
-:10D53000FE15127F7F95FBA0C5C6E6FFD28E79A5AA
-:10D5400064A5F3EF374053ED470F1C9727F5C4A9A7
-:10D55000DA76E83DC3A68BFDA5EAA31FF43B19F0DC
-:10D56000E0F5CC122E2ACFE14AF5AB36867565443C
-:10D570002135FB47F07471C1345B1EAF372B9DCD55
-:10D58000C0B9A9E70E23DB49F3EDA9A07D1F99E5FA
-:10D59000C4BEF730E627BEE71B4974DF35B5A7EBFD
-:10D5A0006E9EEFDA31C2D5427C5D9CDF173B18C915
-:10D5B000F7AEA982AF29FE72D2D11949F42ACFF36E
-:10D5C0009592343E6A9ABE752CAF5F69B774411E5E
-:10D5D0002C7E706E9493CFB3720B3FCF7339C636E7
-:10D5E000E9CFF3FCBC9D9137F8CA7379E8F91B3495
-:10D5F000033AAADAA4111D0E6B715992888F690E35
-:10D60000ACAFCAEECF84FCAB72D95C283FDBEC7EBA
-:10D61000E034D70FCF37CFA4945DE670E7F3BC0AB0
-:10D62000C8E3FB7E6CBEC7053855B456D0793222AC
-:10D63000C743FC69B9A4BB591CCC1AF88DA933099E
-:10D64000FBB02B577E8F7564D9899E6D0C70E832C4
-:10D650003BB230AFAEF53603E4E6ACBB045DF37D20
-:10D660006635F1F6F7985838F6FBDFD09EAFB36C0D
-:10D67000ADA97407CF0FB53253642CE82A97E8FAA6
-:10D68000E7051E33E0F0E98FD838E805959B36D3DF
-:10D690007C145D305347F120E879BBD3F270BE565D
-:10D6A00074F4F38269D7E605D3C34D1AD1014F5FF5
-:10D6B000C9207A98338BE8619A3F73259F5789B1C7
-:10D6C0008EB961674864AE303EFF5ED643FA442FA0
-:10D6D000D72720CF143F517C83D381DB1A1FC0EFA3
-:10D6E0009E663E15CE93F7365B297DB2D9C14C1CA0
-:10D6F000BEFB9A1329FF4CB393D2B6E66CFAFECB6D
-:10D700006617E50F348FA3FCC16637E50F35CFA44C
-:10D71000F4C5E652FAAEF812870BF121C557143F53
-:10D7200052F4A4F852281D953BB137A83DF13DC5F0
-:10D73000EFB00E435E801F29FCA66BA5DEC434F05B
-:10D74000B1CE05E01725C6B34F3FCFE1DB5B6D7768
-:10D7500085390117C1F77AED5692F3A9167608E7D5
-:10D76000FF9615EEAEBB83E4EAADD51A3305D1EDD5
-:10D770006D8D36660AA2DBDB9B6274F9B2A6B78FA9
-:10D7800025F0FEFF9EE2F1022F27EFFCF8D1FFE427
-:10D79000DF1FBFF3F3E1C0379FC7EE8730EE9AF08B
-:10D7A000BE79C422BFCE4C726658B838270D0B170D
-:10D7B000E724FC013F8B98D8A78FDFF957DAE75DA4
-:10D7C0004D614E23F40FE08BC3F70389AF454D61E4
-:10D7D00004C78AF5A79E7E1EFB7D8D85F8DDA275A8
-:10D7E000727F6EE4700DD2DB3E4C62A49F696EC600
-:10D7F0009A38FC3EFC91C5CF653FFB50B3FA34DE4E
-:10D8000050E387A632FEDDB3F157EF41DFD69A4EE3
-:10D81000907EECB1DAFD46CCCF6B3E1BDC9FD6741C
-:10D820009CEAB1CEA1311F47D0566480634481DBAE
-:10D83000023E01DA06FE16651F61D8DFAC55730C97
-:10D84000E7EBAA92DFAB366AA47728F83F9167A48A
-:10D850007D753AD744789D863D3B981818C929456F
-:10D86000B79C6FB87DD81FADB9962541FC7891FC67
-:10D870005E996DA0547D3FCDB725FA9986CDC5FB45
-:10D88000BD373BDDB298F89DD3027EA0EA2FCACE09
-:10D89000DB905E807EA6C6B1A07DF95C9E49CECBB2
-:10D8A00021E49895CB31DEAE6E0079A0F4934FF170
-:10D8B000BFE369FE74FEAA79E6A9675E845DE2FDB6
-:10D8C00030C253CD35D2BE91E31B3397F41AB75D06
-:10D8D000E3EB6C90F82F7EEA4F519DBC7CF901611F
-:10D8E0003FE56917D28635D5642F6B70F17D827D57
-:10D8F00070C8FC6167105DBEFACCFB519D74BEF030
-:10D90000261B1291FA93194F1B0E9C9AC1D01FEB44
-:10D91000D9E0B05FD96EB97699CE996A1D2587BFD7
-:10D920008CA7F1B54BF154FFF0FAF8FEEC20CB993F
-:10D93000E9C3BEFD4B7606B7CEAEB69C6DBA60E4C9
-:10D94000F35DBE66E627A0F3D0FA9FE445C6817E6C
-:10D95000D8583696EC18266600BE575A051C7A7DB4
-:10D96000C3A3D9D7D85F966FE38DB8AAD56B72469B
-:10D97000BBF87CBB613FEFA77E4EBE90EBE7F83E65
-:10D9800062FC2CD5BDCF48E785EE7D9144FF0DFBB1
-:10D990001E383E91E71B76691896D5B30E8253C3A5
-:10D9A0000123B306CB33D877060D3CCFDAA7221B71
-:10D9B000414FCBDA34F76E3E9F5EAB337A70D07C4A
-:10D9C0006CF9829E6AC3DAC6105CE5FCFF2EF999F9
-:10D9D000AAB7ACFD010BF0C5EB9D27FDE517118C37
-:10D9E000EC66ACE74DCCF3CCF67C17EC7BCBDAF6EF
-:10D9F0003790FCDF17E118CED7F1B9B4F3AB7E0650
-:10DA0000E78BFD34385FE81D67A43DF7CC3346E271
-:10DA1000439827F6E1E7D07383E6992CE7999C2F8A
-:10DA2000F49B23D88F8581FACBDABAA23279FD4FE5
-:10DA30000EBD4DE97039CE327BC768C8CD4F0E445C
-:10DA4000CCF451FAD3192FF1F1CEB54D8DD382F626
-:10DA5000555EBE99FA3DB7DD3813F062BE4152CF34
-:10DA60006FA3F59CD997ACD1F916F0E67AFE99032D
-:10DA7000CF461968DF7A453B89478355D869C36229
-:10DA80009C52CFB4B642DF58C8B5BB68CEEFEA0FA0
-:10DA90005C20F91BFA5DD5A7FD9684F3770FD93585
-:10DAA000F89F01F45BEF10382F31E624601F945F7C
-:10DAB000E3BCE556F0B1D7CC020F439D0FE15C55B6
-:10DAC000FED620B25BAC343B1390FFE2757E10E4CF
-:10DAD000F32ECF97FB3BB1B31076CEAE3421D7EB0C
-:10DAE00036F2830A5FCF108E772F5F729DCFC83CCE
-:10DAF000F9013FD1FCFC745ADF23D506B785FC2C15
-:10DB0000FE2CD83D4F5A9897FC46BFB4097F40BAC7
-:10DB1000B0EB3F22FD4575B1FEAC41B07F493CD62C
-:10DB2000CDE1E541F8ACDBE9CF82FE72D622EC7C98
-:10DB3000287720CD13F55A24DDA01FF4DB95E638B5
-:10DB40004F7AE673910CFABEE1F9486157F8B96D66
-:10DB5000675890DCAC9674C575262FD6EFDD2DE6A0
-:10DB60008779417F5E6669CD827EA9C65D16D54AFA
-:10DB7000E39D95E32D0B6F15FE098BB047A23E8DFB
-:10DB80006F66E447E979228CF4D4CF933A0E62FCB5
-:10DB9000CF9F18C920C7BBD27C4B0E5139D7DF3875
-:10DBA0003E6A9E0CF363BE9F3D11E963BCFE67664F
-:10DBB000A10F7D16194FFAD089C8ADE5E497D915A4
-:10DBC000A6C1AEF299C62C8928DF2DFC1835CD4DA3
-:10DBD000E47FA8E1DB9DE5513A93C5A27C24D95BA3
-:10DBE0003EFB35DFA71A7DDF88EF1ED65AFE03EC19
-:10DBF000BBBD116477FBFCC9FF1ED99FDFA26697EE
-:10DC0000DEBEA4E84095DF23F9D23D128EF7E53B56
-:10DC100008FFF5116D5BD3699D62BF723CD0B98B73
-:10DC2000EF8F78D8BB4FB6BD10AFD901677FD64F05
-:10DC300001F7BDE27CF3F93E33F95D6A9E8F749380
-:10DC40001DE7EEB106C88B1AA3D0836B0C1C7C3C7D
-:10DC5000D5EEDC9B053DBBE5095B1EE0C1E14DE770
-:10DC6000C89EDD46398E18F7B33D29C2AEEF97F94D
-:10DC700083A3C8AE3F2B96DD3E87F49CEDA301D76E
-:10DC80008BBB220CA00B3E8E5BE3F0A9F9C10F0504
-:10DC90003CA397905ECEF71FF1CB3AC92FEBEF9ED6
-:10DCA000183D11FBE92D23835E70D1E44A003F0C3F
-:10DCB00085D70792AFD41E7CD402BF5D1DDF371E0F
-:10DCC000BE6F6AA57FACF6498DF4BADA0D131F2238
-:10DCD0003EF8A6990DE7F338DBF64054303E8E4B04
-:10DCE0007E1668EFA2FAB5BCBE68FF5A14CD678FE6
-:10DCF000D985F984E2F15BB77FD2F8ADDAF7D14785
-:10DD00001B97EBA3AF5CF745D6F1FDF7C14FF6D9F2
-:10DD1000C87EC5F19E0ABDE38CB96D09D67DE66962
-:10DD20001BF199333162BF7FC2F9A17704E6F19DFF
-:10DD3000FBC9BEF1BBB90CF260A94FDFAF1AF735D2
-:10DD4000C97FEB07B9A26127ABE778407F1C2FDFC3
-:10DD5000A5F66F99A97DE83A9E44BBC2A0FDF9746F
-:10DD600004D1CB9921021F679E194172A52B46D081
-:10DD7000399F6F2ACE2B676244CAA08C703AA89153
-:10DD8000E7D13353DBE8FC7D46DB4F699759B4ABF1
-:10DD900069927E634E7789A01BD024FC61D64D1D0D
-:10DDA000D02760AF1E9347A93F2CF64ABB33E81338
-:10DDB0007228A340C82F86F1E2A5FF83F494360BA6
-:10DDC000F8B247EA7175FBAEF4C301BF75FB34F2DC
-:10DDD0002319543F7CD671CA5ECEE9B1D6ABB96D7A
-:10DDE00098CFBA15CBC88FD4B8F956D0BB5A47AD27
-:10DDF00089CDC479A84B33D27CBA6C7CDF000EC1CC
-:10DE0000E305E95D91817198239EF44C52AE630A5B
-:10DE100084BC42BE95F757B74EDB44E3A4A973A573
-:10DE2000589F8213078B05F6327EDE17E503AC5F41
-:10DE3000CD3374FD6A3EC30B849DA22BCD797F1137
-:10DE4000F0FD86D18573FAC5CBF9D1B15FA397E117
-:10DE5000E4D66737E6F3CF034DF1F97F29F95B2D5F
-:10DE6000ECD27C9E59DBF5FE90EC5DFAFC55FBF4A0
-:10DE7000F99C03FAFCE8767DDEF5AA3E3F448EABC2
-:10DE8000E08473AF738438F722C5B9D71926CEBDA5
-:10DE9000C8E3DC8B14E75E7CC7B917799C7B91C71C
-:10DEA000B917799C7B91E2DC8BEF9505827FD7498E
-:10DEB000BB23F000BF0C7BC1A6FCECB45FBA17C457
-:10DEC00013FF547ED2EE653994EFB3EBCCB6925D7E
-:10DED000876C375C2F993BD473434121FCA71D1BF2
-:10DEE0009280375327D97397BF28ECB97579363BA1
-:10DEF000EC0C9DEB3FD900F5296BA8670EEA779BE8
-:10DF00007BF6101D98FCC4373AD73ADF9A22F047C7
-:10DF1000F60E668FA5F34905E45DECC0780CF5AB11
-:10DF2000B04D7A3F4AA85F25D49F124A07CA8FF2A4
-:10DF3000B8B92709FCFED413D64D98FF2969276389
-:10DF4000F3ADA47F29BDBAC4682738ADBC4FDB0947
-:10DF500039B5AA2096DAF79EE0FA763FF256A595F3
-:10DF600097F2855EADF29B3403F9693C6E9243AB48
-:10DF7000E49C52B59EAEBB4123910692E317ED0699
-:10DF80003A175C7CC7487AC4886D06DD7A46FAC2C7
-:10DF900075F475F5DED8107FE0105DFD6B0EA5877A
-:10DFA000F803AFD2FBA96E5AFB0ACED77337E5EB65
-:10DFB000EA55954E0C81A39CB7D44B5BD66C4B05B0
-:10DFC000FF5915D94BF35FF59C8DEE5D5471F9E265
-:10DFD000E6EBAE4686F3C76AABFB46C0AFBACD1CD4
-:10DFE00003BB56A5943FAC492F8FAB4DCCEB880DAE
-:10DFF000D05DB583B96378FB73B9AD7B0C1C6FE75B
-:10E000000CDBB71639E15FDA91EAE074B55A6B8B35
-:10E010001FCFFB3B15E3D951C0F773AAD9FF933249
-:10E02000F0CBFD196C2DAF776AD3B351A4774B3A7F
-:10E030004B353BC281EF1DAD463A17C03E057B9084
-:10E04000A2871DAD83C233ED817506F07F99D6C7D7
-:10E05000F142F7467AED4786AE821ED726D65B3D63
-:10E0600055F3929E2CD7B352CA15B64EF4B35AE666
-:10E070004FCBF3825ADFD991AF8C76C2AFD97C28CF
-:10E08000D5083E6ED8B72709FA4582A71DFBA77AA7
-:10E09000C7F0FF2CE2E3D6FCDEC8E047FE68CBF415
-:10E0A000A8F1D03F9F36BB66F1FCDDAD3FB3E05C2D
-:10E0B0005063F25970EEAC7E628705FEFF6BF7EE9F
-:10E0C000A0EF4BF656D0797B296BA473E4A76621A9
-:10E0D000A7153CAAA769DB1D7CDE998582BF568700
-:10E0E0008BFB2025C6A2637158EF5E2D17EBBDA9EF
-:10E0F00074BFA5827F7F57F2E1D0FDD1FBFADC929D
-:10E10000C1B02BB5093FE840FB619E7F24ED87B984
-:10E1100097D228BDE9D2D574AEFA3D2B1D457C229D
-:10E1200027E43CFBBA51D8CDDAC53EA8B6F8E3E601
-:10E13000629FBC6CA67D526F82ED1BE764C626F021
-:10E14000B4B4C8A8A3D7E5C5113A7A9ECF62757E4C
-:10E15000E59BD9105DFEA65919BAFAB7DC747508AB
-:10E16000FDE705CA898F4CD0DD5FA95FE3756A645E
-:10E17000479BA6FFCED3354467D7EBDAD7B33981B7
-:10E180007A3807EFFA2DC199B10E0BCE5BD5067127
-:10E190005F67BEA74B7EEFA4EF7C21BA7D382CC30E
-:10E1A000F59F422E9AC93EAFECD3F3F1FF19FDC99A
-:10E1B000458E68396EB451D8173C7ABDA383CE9F83
-:10E1C0004CE0A15EDA7BEAB385BDA7DEDB6169B412
-:10E1D00013FC4DC91C240DAD1AD9F3787D6B72ACBC
-:10E1E000C8AFC1F703E6809D8589FE2EA1FC84B1EE
-:10E1F00002FB25B4BC81AF1B7A4603EC3564679AF9
-:10E20000F909D999D438B27F45A74BB7E9ED470D45
-:10E21000B0EB04E17359A193E8B566EFFEE3433830
-:10E220007CE696C6E4621FD5B5CD3657E45C496FEF
-:10E230008ACF5FAC3690DFBBF7F5A3446FBDD52620
-:10E24000A2EB6F824B835BD83543E970095F9795EA
-:10E250008FBFE480E6F269A21EE03304F419029F46
-:10E26000E47EE0A6E0D507BF90F2A5F89F02DC2788
-:10E27000D07CFEB4FEE012024F354E08BCD8383DCB
-:10E280003C96789C6F81FF2C396164BE6FB1FEA50E
-:10E290005827E6C1D78979CCB924EC26CA9F70F3F8
-:10E2A0002513E5FBE8A694C32B0FFB4EBF4FFBE8FD
-:10E2B000A854EC9B7997E2A9DDBF8A9EBE898ED4D3
-:10E2C000FC15DF0EECA3BB486E2C2F8C8CFB98B397
-:10E2D0000AFEFF85C417247F1D582FF50A3EEAD198
-:10E2E000CB9961778EA37B47BDF674D22BFAE4906D
-:10E2F000435FBE32323D01E51E69B753FCD823EBC4
-:10E30000A9712A78B97310E87A683CECB11BD6651C
-:10E31000A47606E92B9EF5E678D80B53D70EA2B467
-:10E32000C2E688871CA9586B2C857CFCF09E84F87B
-:10E3300071B0CFAF37C7CDE25D7F7847412A1B85EB
-:10E340007C09A5A73687CD0FB673AB745BA1D0430C
-:10E35000EBEF7C8FE4DA39C3EB51F3B1EFD63F1723
-:10E3600085AB37B5EBDF1EE3E02AC9DD319E870AB6
-:10E37000C98FBA638F037073EC180D3BF5CF6143FF
-:10E380001B1CD01F6AD69724C02E56F7B7A38F4107
-:10E39000EE7BD69AE3A17F7EF60E978B1AC935D213
-:10E3A0001B3EB5313A2F7DBA3BC207FFFDA71A735A
-:10E3B000C3BFB3CCF8CA68874ECEB6DF8C79EC4DBC
-:10E3C000F0FCBCB010E3FBF624627C9797EE677A12
-:10E3D000D60E8FEECF8EA2D2E5DB845EB747D97121
-:10E3E000A5BD17FA3CF2D0E7D908A1CF230F7D1EB7
-:10E3F00029F4797C3F26EDF8C35A7A72711EF54EE6
-:10E4000063D98D2477EDD9D0D75769E12ED2333532
-:10E410005702EC63EC9D18216F43F0ABD2493D5C91
-:10E42000E70AA2FB2997AC2CF89ED95416A3CB4F30
-:10E43000B726E9EA9738D274E5D7268ED4955FE7F8
-:10E44000CCD5E5BF933D5E57FF06D7545DFEBBE3D9
-:10E45000AED3D59FED9EADCBCF9DB940577F5E69C2
-:10E4600085AEFC96F9CB74E50B3C2B74F95BABEFF6
-:10E47000D0D5BFAD71ADAEDCCD1C26C8BD769CB38A
-:10E4800038DC5FC6398BA7ABDE186E0FC66BD17454
-:10E4900043637F76FAF3521F9A38D6FD19E823C5F5
-:10E4A00020E890A76EA81097A55C49667E4D9C73E6
-:10E4B0003B924037A1F542CB8B228E5C74721C2EAE
-:10E4C00039187BAB89F391A2B147F23378FE9931C9
-:10E4D0000B447EE29167D379FEE0C1ADB79A38FF75
-:10E4E00028BAE6C845948F1E5B2EF27319A91C4703
-:10E4F000C6FC6DA197AFA3684AFA2697B093F47B48
-:10E500004F53A58003EE37020E48FD9C3E911EE15D
-:10E51000F489F4554E9F5566C68E73FA447A829FED
-:10E5200037F1FD37FCBC89F4757EDE44FA263F6F77
-:10E5300022EDE0E74DA4BF6B9E4FE93BCD1E6AF78D
-:10E540006E7335A5EF3537D2F73F363751FA41B301
-:10E5500097BE278E5176053FD95F949FA901FE3D56
-:10E56000D8E70E99CF06FB61959F50F9055B1A59C4
-:10E570006704F669A729E6636BC0DF37309F35B1C2
-:10E580008F83F4B0CD89EE8C3134FE5007F97BE4F3
-:10E59000F769DADC14B8FE6E1DED193986E37B5E8F
-:10E5A0005EE5FA68CE3FA65C6E34835E7E2FEFA9EF
-:10E5B00086F67F59D249DC58F768B49B6C15F7F0A2
-:10E5C000265BC53DBBC9A6CE16F0A3962F9913F7BF
-:10E5D000685E89B4107F6AB9C7E4839D52FB82519B
-:10E5E0007E521CA37CCB971D742F6FB2C39548F24B
-:10E5F00046E6FBFCE7F80BBA2FA3FCD9EA9E4CF1E8
-:10E60000179DD3A1074CB25B9C6121FE77F8AD5FEB
-:10E61000897C57CD87613CE527DFF525F31B46074D
-:10E62000FCE193AD1D69B0134C5A6D7505DFFF51C8
-:10E630007E6FED8B0E23E489BAE7A3C651F38D34C8
-:10E64000F1FEF202F778263BDA7271AFA1A5DE4E39
-:10E65000FD25F0EF963CAAE73652BBB65CD8812781
-:10E66000D5D95DB06F2B7F7B825C37AF47EB2CFE3B
-:10E67000C243F70D26C9FB06E8C72ACABDE86752A0
-:10E680009C3FC984F5375A5CB0873EAAF1F6790100
-:10E69000FF3FEA4704ED5FCC13FD66FE85CF177A96
-:10E6A000BBDB4DF09DABCE6F4E9997F29959A79178
-:10E6B000FDCA28F3BF1DED590EBC978639FE1441E3
-:10E6C000FB3C2305768ED9526FFF1A7A59FD3F43E2
-:10E6D0002F6E81EFA18CEC69A174A3F0A2F03C1025
-:10E6E0001D29BC07DDD7223CF7DDBF92FD84D2D7C0
-:10E6F0004074A5E869B255E01D78C53D1A4547DA72
-:10E70000176D3B681D755692738A8E42E9E04A3A4E
-:10E710001274D9F23D2BF577251D05F00F78FCF327
-:10E7200074D46184DCFD47E9E7F61E36239A17DDD1
-:10E730007B8DE732E446C525E771E42BD9D4192057
-:10E740002955FE00CA075F591E4A5FAAFE8B03F4D3
-:10E75000E7F9A2C71C1D449793A40CFCC300F55F06
-:10E7600093F7E25FB3A9FB1E6E7B2EA783E9920F9E
-:10E77000AF2A11F43533CD48FE8CE9394B49BF67D8
-:10E7800076A11F3BF93F646F93FEF5EB65BB1997CC
-:10E790004BD7619C19717AFDFB7AA977CF0CF1B741
-:10E7A0005F9F732DE9E1D787E8D9EF8D917A741ACD
-:10E7B0004B13E7EB4DA4FF16CBFD982CF19DE134F4
-:10E7C000B2220EF712E6314108BC7ADEE2467FD76C
-:10E7D000322FE5AF633E4ABFC3FCA407DCC0050689
-:10E7E000F2DF658CEE8F1E8DB8B16C39EF6F7AFE5B
-:10E7F000F44C7CAFB3F6A45A0CB81DE8F90CF2A1A6
-:10E80000C1E8F933F4CC73299E11381F1F29769281
-:10E810001E76C49A417A21F69339C85EF96B2E4769
-:10E8200033B99C3BCAE52CD2635CCE667279F72B78
-:10E830002E6791BF3E7B2D43BB194EFDFD1ED5FEBD
-:10E840003B8EE9CC34686039F69DD12F0C851DEBE9
-:10E85000B59811C5C0DB6B31638BB1DED762120C8A
-:10E86000220DB3503AEAF9CCFEF45645AF81F16679
-:10E87000D078A1F055F00C85A382EF3F01CF416322
-:10E880000BAF84E765E8F7B09F5ADF8E4A4C879F4D
-:10E8900051C6D345083E58FFFCA804ACA3CE2AE0DD
-:10E8A00032A96922A5939BC633533EF999BC80EFE8
-:10E8B0006758020CCE217636669A46F9EF49DACAD5
-:10E8C0004EF00CC73CCEE6F9B3B846C63ED9DE12D0
-:10E8D00085FB99E79E31BA70AEA9333A37B9602704
-:10E8E0007FCD28E2822E1F4D857F93EDEAFFBE7417
-:10E8F0009D55C1CF4B70FDD9356EDA6F0CDED9F85E
-:10E90000805E33344CDC3326F742DEC07ACE98701A
-:10E91000C167868609FEA8F0C5DB09B9CBFB19C320
-:10E92000F95AF2FDE174AE2918E62EC27AF879811F
-:10E93000E28A7AB323C85EF11B199738D97F35C5AF
-:10E94000E5CDC4B99D7F378647EDC4BEFF8D8C4BA6
-:10E95000FCC520CFB5687F6D5A5E22E0318509BFC6
-:10E96000CA7556B3CBCFE774DD58B90F47B3D13270
-:10E97000AE4777FE507692DE3823C9A1C92CEB2131
-:10E98000D8098A4F98C94ED077DF2D51F8457B4F73
-:10E990005C3482AF94446A6C505A203E272CD1C01C
-:10E9A0009C417ABBCD19CE9C41FB23223B56978FCD
-:10E9B000740DD1D58F1E97AE2B8F715FA52B1F3491
-:10E9C000334F971F5C3A41573F61FE345D3EC97338
-:10E9D000BDAE7E72F51C5D5EF1BD64F189A5342E7D
-:10E9E000D4B51FD6B448573FCD5BA32B5778605E94
-:10E9F0007747763CF8A2F8CBD8B85257EFA7512208
-:10EA0000DE64A67DC92CECF7E1AD3FD0CFCBF8BAE0
-:10EA100046F1A34EC16FBDFC1FD05149A29EFF4ECF
-:10EA200077E8ED1AC98D265D7EC33F8A67CF553AD8
-:10EA30003C87C283E3DDE5477D2EBFBD3C5FF2EB43
-:10EA40004A13F40BF82F82E70FFF45F07AE1BF0875
-:10EA5000CEC37F115C1FFE8BE072F82F82CBF34F89
-:10EA6000E8F15CD8A1C7F3D8F7F47856F437103E34
-:10EA7000C677EAE920141F133F0DA10B8987F9FC23
-:10EA80009FFEF04047114EFFD31B19D9E7BE092F57
-:10EA90002F84E065D2484F3BF6EBFC4117532DC065
-:10EAA000538F6704CE939F493B49E83D4E2F57074C
-:10EAB000280EE107468ABF396968D5C097FD299EAF
-:10EAC000636379FDDB731A897E1259E9FE257C3E6A
-:10EAD000E5FF11467E9CF261225E97E574529C83AD
-:10EAE000E277E5C9E21ED11B63E5F9CD25EE13758A
-:10EAF0008C15FA6CA4CB41F78E2B72441C073F7621
-:10EB0000A5968F02FDBC6E1B017AD822FC269D883B
-:10EB1000178E0BC40B43DF847E9722F5AB963F58CC
-:10EB2000AD58C7886D4C272747FAACBA7BAF57EF73
-:10EB300075E8F2A3DA1275F5AF39E4D495E7FAB3C4
-:10EB400075E5F9275CBA7C61C7385DFDB1EFB97531
-:10EB5000F9F19D3375F5277E5AAACB27B39E87011D
-:10EB6000DF619A38EF5B395FA27B604E110F547EF4
-:10EB7000778C8803957600A54FABFBD01E4977A113
-:10EB80007AFA308BD0535B9298388759E5798BE9C4
-:10EB9000F5758FBCCFACF454E6D5DF6756F798FB1C
-:10EBA000F47AA9B72BFD38E81EB33BF81E73B98C75
-:10EBB000DF0E957F71E3847D2F74FEC32C62BD2D23
-:10EBC0007758286E44CD2B743ECBF304DDEEB6F6B9
-:10EBD0001FBF933E4EA3FE8B724B878CE3F51E3313
-:10EBE000BB7C6447B9623C57A717E7CA1F595C77DB
-:10EBF00039BF79BCF26BC47ACA0C86DB67E7D07D7B
-:10EC0000B1F9BF0C1A3F6F9CA0EFF8095ABFEB2B6C
-:10EC10008F16F7B958B4C509FA1D783C01CF440BDB
-:10EC20005B477146F2DEFF6D9BDAEE1BC18BCA2C8F
-:10EC3000AD66325E309F19F4306B1AD7A772611738
-:10EC40007CF1113BD7371E6B32919D67FCB8616533
-:10EC50005C13EB8BE318C6CF1BA00FE82C38A73C46
-:10EC600039DE48E32C1C27D65762BCDC77FF9EFCBC
-:10EC7000178C49FECDE83E4C3FF44674A8D6F1AF60
-:10EC8000BA8FAFE836144EEA7CC9A4DCC994F352BB
-:10EC9000F053FB41C14FC5433857984B77DA29AE43
-:10ECA0006226EE9129FCBD3C5EF0A34D8047A1A8F1
-:10ECB000077E3450BD12634E34ECE1BDCC19EDF843
-:10ECC0001A7BEFBF304E81E03F507CD540FCE10A1B
-:10ECD000BE3040BCD540F4497FFF40DC55107F106A
-:10ECE000F77A243E7C9906F2A3DF1DA9DFC72F8C9B
-:10ECF00013F0F5C87DCCE5AB3D57CF2718ECF72DC9
-:10ED0000EB8D924F08B90A7D03DF17AF3793BEC171
-:10ED100058E956C4117DB4C54CF75B27BB9D335CE5
-:10ED2000C23F4F7A07F9BDF8D42ABC7A79CAE5FB0D
-:10ED30004EE8C153986B03FC19951BF5E54BED3379
-:10ED40003E833C5F1C722E5D2ACFAB4B43CEA54F5A
-:10ED50008D93F2D8C55CA427493F7FB5ACD3474714
-:10ED6000BE8C686977A1FDC953BA17A6E0E284BFDB
-:10ED7000263F90E7F00BCF869C5E67EAF7BE5E1FEA
-:10ED8000FC06B88F7016F7119CD8EFBD146FD57BB9
-:10ED9000C026FC94CA1F24EB9FF55EA472D4476F73
-:10EDA000E7723B46430FE9F31F85F8A17AED86A889
-:10EDB00071E86F9F99FA53F72D6AFEEA1BED08F28E
-:10EDC000277B3A8DBAFB2D57CC7FED7374FFE2EEB3
-:10EDD00018CF3BE0E3674C2E2BF0778FFD483CE2E9
-:10EDE000E46749BB4DE87CFBF4CE224DF861BD22BF
-:10EDF0006EB677A646F700381F64D837EADEC06CD7
-:10EE0000E68F43AAFC319E8DE309CECA1F53E11F52
-:10EE10004FF39CD7B2D41CCEAB743EBCA624DC19F5
-:10EE2000F0D374A6887B3F03F96BE65ECAA5FE6E3D
-:10EE3000BA3491FAB9382E4DE85DEBEE5B013ABA7F
-:10EE40006A2F33639D9D21F7DE555A29F98D77BCD2
-:10EE5000E2D3F23ED15A8DE87CA5C6D4FD22E2D39E
-:10EE60002A7FB155E64B447ED57A91EF348B776695
-:10EE7000F6487B03D68914EBC1B9789FB447601D6F
-:10EE800048B10E7C075F421E7C0979F025E4C197EA
-:10EE900090822FE1FB22569A9A6B147EA5E2A07D08
-:10EEA00003BF527190DE03BF52701E7EA5E0FAF0E0
-:10EEB0002B0597C3AF145C0EBF52701E7EA5E0FAFF
-:10EEC000F02B05E7D9B8EB0279F031F76C5D7E2EB7
-:10EED000D7BF8B83F62DFC4AC1FDC3AFA4EBCFB3E4
-:10EEE00042D7FE56D6A46B0FBF5270FDDB9B349DFC
-:10EEF000DFE976F91E40E5B641441F2F8D2E758D52
-:10EF0000E7FBF5CF117FFB9E19E70063FB32D0EDE5
-:10EF1000CAFA7097C073EB4C8177031378EE5940AF
-:10EF2000785E6311F91271FFB83FFF4DB159F86F68
-:10EF300090C27F8314FE1BA4F0DF140F17FE1BA4E6
-:10EF4000F0DFE03BFC3748E1BF410AFF0D52F86FAC
-:10EF500090C27F8314FE1BB483FF0629FC37F80E92
-:10EF6000FF0D52F86FF0FD24FC4841EF66404FCF93
-:10EF7000D49DEB381DEACE750E5D1E7A7A707DE861
-:10EF8000E9C1E5D0D383CBA1A707E7A1A707D7871E
-:10EF90009E1E9C5F3DCE49FC12FA7A703BE8EBC1A5
-:10EFA000F951ADDE63B01DDDB0FDFCAB483B23B5D0
-:10EFB000C734CE0A56BC70A00C7EB64E9B961AC3C0
-:10EFC00039A5597BB1AC98E73DF21EDF68D66300E6
-:10EFD000BEC9CFCEF1E6F133BA773CEAAB242A576B
-:10EFE0007E5DFAE378CF3DC048EF3F26E33D557B99
-:10EFF00017731891AAFA817CFFF542C757F5885F0D
-:10F0000006CD831F0C7371CF24778D3D0FF7E5F785
-:10F01000183471DFF42E71DF3794AE764BBEB4C76F
-:10F02000B0FF4838EE0F55682EC4316499D8097383
-:10F030001EE0D49807FDE0BEF131725D8D1370FFC4
-:10F0400048CD5BD901399FA0F8B5A21E66A9E2E3BD
-:10F050004CFA82591683BF5B845E8076382F5EED52
-:10F06000D5DC3B83E8FBA1F142BE79BC2B2654F1F1
-:10F07000EF57EF6B9C80B8B859E1A2DDCF1F8F220C
-:10F0800038DEB84EDB89F8C3A27DCC8D78579F9CC3
-:10F09000F7D5FB1C962A1AD741F174AADF8AEDA98D
-:10F0A00014FF57C13A8B115FC10A3406FFA8821BB7
-:10F0B0005FDFAB585F16DF2A66D23F455C4EB88CE7
-:10F0C000CB51F1386131A555905B2A2E6752414CE6
-:10F0D00009EEC5B176E64218F00D0515EB07F3FE13
-:10F0E0003D3EB70BF78A267DD1788CF2BB4A294F7B
-:10F0F000643086C621B936C2ABD1FB1A377A77188D
-:10F10000E29C88D75D6B8E47FD7DCC0575878B1A99
-:10F110008A3B55F3CB611D069B06BCB3A38382E8F3
-:10F120008873809B80F75C9799DEDF986D7298C139
-:10F130003742E5F895F71643F48490FB252D6BDEF6
-:10F140004B35A6E37E89C1E507DF7A2E82F405A55B
-:10F15000EF54C8FB6617D71D1B7C0B2FAFD82FF4BD
-:10F1600003CF368DF89FBA6F529FE14B35405F1841
-:10F17000B26374AC51C87FF0C533DE676FC616AD9D
-:10F18000587F8CE2222AD617468BB828E187A892AE
-:10F1900070AA92F78A588E231E7AE6879CEFB847AA
-:10F1A000D0BDC4688A2B6C15FA9CB2B7287D50BDBF
-:10F1B0001F53F146FE71E0BDE251F92ECBC60A8A1B
-:10F1C000BF0ABDE7532BF5BD65EBCC747F6859884A
-:10F1D0003E582BEF0BD586E883E7C687E883F2FC21
-:10F1E000A2EEF356BC71741EE92B8D66F2CB95AD81
-:10F1F00015FA0BDBCF7C8867285B3BDD807743CA41
-:10F200009E73BBB47EE8E42DA9C7CCEAB4115CE7D9
-:10F210005C4AA6F4E64B4994DE7249DCA344EC0B4D
-:10F22000E8A0F305467AF4DB526F99877B9588470F
-:10F23000F486C9FB938CF4A65CE62801FFB8CAAD3E
-:10F240001D85DA37CBEC598F7B9BB376308A3FBA7A
-:10F2500001FA0DE2BFA0EFC0EE5E90564271183386
-:10F26000358A67B9A16085A46F4EEF0CF4EE95F472
-:10F270005B4AF93EB920E9DCE3ED3201EE3778353F
-:10F280000BDEE1F3C873ACA2E3507A2F8F90F62720
-:10F29000BBB02FF5D99F30593C6AE38DBE0DF75BAB
-:10F2A000CB61B31BC204E239CC237344F98817A3A2
-:10F2B0006F5B8743CDFFA35DA2CC6010F14E5CDF96
-:10F2C000025FBD6D75AE6551107FF962E2B419132E
-:10F2D0000B03785F1412A7B7F29EE1095F172F5A4C
-:10F2E000C9E18C7D521EDDF93D4EA1ECDA09CC5D01
-:10F2F000CCCFAC0B18538FF7F8712F70A1CCAF7E29
-:10F3000071DC9F36DA093E949F3E21F5362FF15588
-:10F31000C1B76E05DF32825F79A64E207ED53903F4
-:10F32000F888C8E991EF1048B9146287583DC1299F
-:10F33000D61B628FA8CC11FC9C999CA9B7525CB0DB
-:10F3400093EC796AFE1F9AF5719A7D7E9109529E1F
-:10F3500034FF6BE21BFE2BC3731BD6B7D520E2E64E
-:10F3600087185B99B40BD1FE57FC83C9772402F848
-:10F37000E77A1AF9D1354730FE3D1B3511A73E809B
-:10F38000FD8665F73CBC1BF6BB660B439CEBE35963
-:10F39000828E1EFF8185F4F0324BC731BC93A5E00D
-:10F3A000F87ED3BF9BC92ECFFCC3F1FED7C2469BCC
-:10F3B0000BFCF98B89A5AB30EF881C17E16306DFE6
-:10F3C00066E8FF644AE9F7095F9B5E790C71FBCB45
-:10F3D000DBD3288EB4E250EE06BC27F2C544CF0F33
-:10F3E00027C08F6B775820C71BD6C5905C2B4F90DA
-:10F3F000719DAC87FC540AFE0F4C10F6ABEB8A04EF
-:10F400001D77CBF30818E66C5D3D798F3B649F2830
-:10F41000BB60A87D21F41D8781F68FB223C06E608A
-:10F4200009B22B2ABB8439FBC30590A365167DFC6A
-:10F43000A14A5F557637791E5CDC27C77266244087
-:10F440006FDEAC3920C7AAECCE5BC6F37CD509339E
-:10F450006E60B259B14EF17EC73DE2FD8E457CBF74
-:10F4600082DF94C9FB5855DBC6D37EABF2F1347F03
-:10F47000E07D79EBE6A3292F807EFC6E8ACBAF720C
-:10F48000B82DB141FBBEB255D3C5F5ABFC8109C265
-:10F490000E57C6D574C0EFB6D56916BCA153C6D5F4
-:10F4A0000BDCEF7B7582531757CDEBD1BD8659E945
-:10F4B000ECB8783F89CF3B4D8C9717D4FFA256FD0F
-:10F4C000FB04BC3EE9452F4F8824FC5538F8BAD3DD
-:10F4D000903A689E1C0E04A79EFB787F4E1A87F018
-:10F4E00051E9F79971EE2EC37D0A9E5FE8F09931DC
-:10F4F000CEA275E2BD10CF26318E67638C6514F401
-:10F500002693C39202F8E1B01C47F3233E58C5E1AD
-:10F5100082782B1577190A9F0A39DFAAD618BD3EC3
-:10F52000D6BAD90C7C2C18E0BD821E49B78BD64DBB
-:10F53000A578F32A939BE2193C12BE1FADB0DD0BF8
-:10F54000BFC0822D0F99D370CE9E20ECCF3D72DFCD
-:10F55000CD4AF70FA7778156D85C98E702472BADC5
-:10F56000AF0FBE0F727868787FA694E0CBE9C28BAC
-:10F57000FB79555BF4F80CCC47C0B76A4B05EDB787
-:10F5800025268FC5113C8F6DAF0CC73D94057C7F40
-:10F59000E3BD23E6F0507CD3C70FDE924AEBE4F3E1
-:10F5A000A47B502EE70CBCF3C3E984E858D18B8AC6
-:10F5B000CB56E359278AB84CEBC46FDA976ED26BFF
-:10F5C0005A387E61EF1E685F5A10D8C5C7B5548996
-:10F5D000F7D742F7A9DA9F6A5FAA7DAAF6EF63E63A
-:10F5E000527FA216E0335CDE36FEB21F38CD90F3B8
-:10F5F0005D28F1CAE1FA6A701CD73513055ECBD2DB
-:10F60000F5FB1DFDA1DF948962BF974DF30F47DC29
-:10F61000A5AAAFC62D8B15ED40F7A0B7948986BE7D
-:10F62000FA2BA9BE3E1EA5B28F5FEC5B1F0F7EB109
-:10F630005F23BD77E57D4753FE0DFAECD3429F3D36
-:10F6400053B7BB21097AA3C9971AFC2E56955FF0D0
-:10F6500087C55CFF01BF5822E5747B9E276762D097
-:10F66000FEAD7AE0E92C8FE02F7EF0970F9E7EE9C9
-:10F67000F7139C01F9A9E6BF68E36FCD15F6607832
-:10F6800089F5DD9BDD4B717695768B13F7972BD73C
-:10F690005510BF6589FC5CA105F01D4A0715EB34C8
-:10F6A0007A5FACB2698CCFF83FC8972B37CDA637BD
-:10F6B00091149ED47B274A9EAAF97F57CE7FA1A49E
-:10F6C000E33913C5FE5B589D665942FB3ECD520996
-:10F6D000FA97E50BAAF4DFFBF0D4E75FCED980FD03
-:10F6E00081B8213A9F6C320B3BDFBE48D257CFAC7A
-:10F6F0007CFECD9B79BDCFB7EE48857EA2E6B154A6
-:10F70000DAF3164BBBDC12A9B7723C5504E369E986
-:10F71000E3024F95CFBCF127BCCB55962EF9D97D8E
-:10F72000229E7F51DB7EC2DB828D9BCD69BCDE8A4F
-:10F730008969BA7B32958DFCA0CBE1B970E30E33B9
-:10F74000F8C08A89026EA1F45E26EFFB2AB842EE69
-:10F7500068417E0B551FFC6F3F1F67F50A5B14EC79
-:10F76000D36A9C47245D5736C6C462BCCAC68A9F0A
-:10F77000E0DCA1F87DE8BE3B6513FB6111EF0FFBF8
-:10F78000F2D45417C535C3AFD59F5CDD2CF1F653C9
-:10F79000B378BF3139A2ED09C0217979B80BFC21CA
-:10F7A00033B393FCC6A067CCDB6210EF3D66D67521
-:10F7B0005EC03CB84A4DF75390E29D29A8D8F13C71
-:10F7C000BFD320E2AFD28D227D5EC28797FB51CEA0
-:10F7D000E23AE9DDB9BE779342E8D5C2766DC47BE3
-:10F7E000379638E66A7106E853F5A3E853D1EF403F
-:10F7F000EBFB85E423DFB4BE5369D21E91ED4A458D
-:10F800009C4AF9FD235CB0CF7CD33A2DF2FDC1BEFA
-:10F81000F572621D17DBCF7A33C5B965E0F56E2945
-:10F8200089EF67BDA1EB54FB44DD69EFF32FB40A08
-:10F83000FFC2298DCB2FDEEED40A1BDDFF52EB5227
-:10F84000F6EF6F1B87F0F6C458694FE88C841E5999
-:10F85000162EF7BF5FE4F17D76D07725F7D57B6D67
-:10F860008A3F9F6E94729175DE87FDCC9A32E87D57
-:10F870009293ADA722F15ECAA9A9627EAADD6AB3FE
-:10F88000883366911627DE3FE4E7AB934DF0FBAC7F
-:10F890004BA073E46D4D19C4176EF3C608FB83D4F7
-:10F8A000EF97483E18B1BA6203DEF95EBC2DCDA1D8
-:10F8B000F17116DB5D1F6FA3F657BBA00F466C9965
-:10F8C0006D4927BD579C03949F68B5C64A296E0CA5
-:10F8D0007C12FBCBF04A26E4CED26DE21C30CBC0CA
-:10F8E00036C24F38ACA5744612F8C4C31AC599B3D2
-:10F8F000EDFA77ACC6E6979EA7F35FC83B70ABCD39
-:10F900006DEE04F071AE6FC0DEB4D85E4A7A7BBD96
-:10F91000E49327B774D17BF40AAE57C4FF58441C54
-:10F92000704FA481EC70DF360EA84AFA9514DD28DA
-:10F93000BFD423F8CF78C0C94872ADC45846EF2968
-:10F940006DD8329DD2AACD255BBDA3107F5C1A3F36
-:10F9500081E66D263B5955FD7411AFBB332C06E78C
-:10F960009B54B33735582FADDA7137C5FF7CBAC316
-:10F9700046F13FC58ED9C53171F4DE31C5D7A97ABC
-:10F98000A94582EFD4D44FD7C5EF2CE67DE29DCDBB
-:10F990002FDB22E87E988ACBA94BF024150D16F1B7
-:10F9A00039E39D222E2789EA3BFBB58BABF4E36656
-:10F9B00011E711146F74E302DEBEAEFED928F453D2
-:10F9C000FBE0DB631C06B2430D47FF7DF146DB44E1
-:10F9D000BC51963C2FCD8A2DBD7901E0FF6B23C130
-:10F9E0007FA0F1AA0F693A3FDE6DBE68D25B3D7E13
-:10F9F00066811FD9E360A4177F6A644DD00394FE2B
-:10FA0000A2BE8F9770F934BA3515F4B16CCF43A903
-:10FA1000902F9F458A7CD99E5B7E037EE5D9152673
-:10FA2000F47313237DB8D22BF46B561DABDE23B5D4
-:10FA300095733A9A5E1421DE3DDAA68F3757EFDCD4
-:10FA40007E6612EFF320DE08F4FEBEC9BF18F87D13
-:10FA50009FEBAF38C7A61609FA7CBFD53883EE0DE9
-:10FA6000F18D023DE4FDD66723110FADF4B512E32D
-:10FA7000076EBCFFB3F23911178CF7E9E9AD506995
-:10FA80000769907690952F986724C791FE455FEAA5
-:10FA90004C7E4B7FF8AB91FA555FFEC07E3AB7D5EE
-:10FAA000ED13FA435D5B17E90F4A1F517187B5FBF0
-:10FAB000BA489F50ED1A0E08B8D41F10DF2BB20DB4
-:10FAC000CA8EE2D632719ED628EF7D31BF7CAD2939
-:10FAD000389F57BE16CC7E82B28FF4903E786FF678
-:10FAE000EFE81C5EBF4EF6CBF3E6A0F1AA414485D9
-:10FAF000E27B861DED9DBAF35DFD81186AEFAF0FC5
-:10FB0000DF0839EF6EB09B90B6D4DB49EE6F6F34EF
-:10FB100064E39EBA5B0B77418F6B97F7B706D7BE4E
-:10FB20006B83FD2089F51CC57BBBFE14CF0F8B7842
-:10FB3000BF0978DDC5188827EA3EFC493EFA9F3C9C
-:10FB4000ACF322DED4306B53CAE1A7682992EBC82C
-:10FB5000E9CC075D0F3E22F8F3A366B691DE6D3661
-:10FB60009532D8EFFDD2BFE8FDCA40EFCFB66BFEAD
-:10FB70009F05EB5787247D9686093FE3CED19E4DA6
-:10FB800098C77735F3A85CBA77681C8EFEBBA51FB3
-:10FB900052E9A9D3247F4E91E72BCB90443BE85800
-:10FBA000DDB7D3DC6E8AF7BC2BE74825E4F38F7B07
-:10FBB000AC142F30AD279CF4D6942133499EA977FD
-:10FBC000DB35A78995F1FA47720C7EC4C5FD9859BB
-:10FBD000C5BD006B887E6BB0D1FD64ADFD575F8104
-:10FBE000AF271B2F1C8DC67DD97FD3E8FDD1F2DE58
-:10FBF0008F1F7D8BE13CECCBA578E814CF1EACE7E2
-:10FC000064EFCC2E0F47DD8F1D6D569790172C7823
-:10FC10001DED777C15156B08CCAFBBE7637AD7B1C8
-:10FC2000BBC74A76DB69EDF29DC390F974273AE9C8
-:10FC30009E34AF47FA66B7DD40EFBB4D6B3F4AEFEE
-:10FC4000154E53EF195AF5EF1932674A0CECCA6496
-:10FC50004BE5CA417C8BC0DFE468FD79F1B522A198
-:10FC60002FBE56A4F5FBDEBD8A5B5172E565FB9E97
-:10FC7000DB845D4AECD3E5CACF7F299DF489DEF6AB
-:10FC80008CAF7DC7E26DE8155C5FB8708DFBEDA2AF
-:10FC9000C2805C9D27E1A4E4B38A5B9827E135CF5D
-:10FCA0006E10F009F9DD154537A17411C0BB88F756
-:10FCB00052F8643FE83886782C8EC751F733C2DF9C
-:10FCC00049C2DF57AFAFC7B30B438CEE2E4FDABF3D
-:10FCD000047FF47EF7B7C65F4728FEFCB611D02339
-:10FCE0001E34901EA1EE3B7AE47BEDEADE23CB6668
-:10FCF000C40FCA8DE1642FF4C877DA391F38063E85
-:10FD0000A0F6FFB0999DA320474FF2233AE6D769AA
-:10FD100068A3EFA993D269BF0E651D49F27E4E21FB
-:10FD2000F43763E07D6AA2FB16CDF7F012DCBF9CCE
-:10FD300067A77BEEDDBE90F7A9E53BE6DD4CF287D9
-:10FD4000F9EA1D73BE9F79BB2D0B4479DF3BE6C3F7
-:10FD5000199DA3B6E4B22CE85FEA777F067CC77CE6
-:10FD6000592CD94D1F79C43712F240BD5F3D25C5CE
-:10FD7000933869F095EF576FD54A17E07760BCA3C9
-:10FD8000C47C3B17843FB34780DB0F7BCFC9A648B9
-:10FD90007AB75BD1A9B2730FF3763D0C38A9B8DA04
-:10FDA0003F4B7A53F05771857121785074E73533A2
-:10FDB0008AC3053E1067D4F7FB316B247F51719DD8
-:10FDC0002FBB9C487F9CEAC99D847DB882C399EC77
-:10FDD000E89DDFC37A1FBD23D28DF99D94BF6B11BF
-:10FDE000BAAF8A261994BF98E206CAA57C2B577130
-:10FDF000024DFA3881D0774EC387964E06DCCE6925
-:10FE00006F8FC1C7D7FF8FB1DFFB27D74E127C2280
-:10FE100033D1336312C9B9693A7DF2F5DC4F52E848
-:10FE200077662E1F1D0AF9774B4AE975E8D79629A0
-:10FE3000FC077F4EEAA4388F3F2FF86B0AD99FD773
-:10FE400088F759BFED3CAF8C6B16F4B06AB1B89728
-:10FE500098CC1A898E1303F1B236CCE37F5B5C73C6
-:10FE600020EE782FFDBEC8CBCD6D19A787F783F79D
-:10FE7000B023CF3AF9C9C67BF8E5728AFB8D3EB252
-:10FE80002A8DE7371E3E5A4E71BEC9472EA671DC39
-:10FE9000DC7BF85591BFFAC845C4056F3A7C4CD459
-:10FEA00087FF6008633F397CBCDCCBF171C768CF4A
-:10FEB000FDC0D7CD971A8F411CFF7EED9CC56914FC
-:10FEC000D73A3B255BC4B5AE03DEE7C52F5A1FAD5D
-:10FED00005E25AF74D12EDBA2F887DD07D41D079D9
-:10FEE00018F8C1E07F3E55F1BD8A0F0FC42FD53EF3
-:10FEF000FC57C527ABFDCCF6B8369A418CDE7F3A6D
-:10FF00006EF8C949B42E7DDC70B7B9E731F22B5DCC
-:10FF1000604EF0895722DF75425EB4148AB846AD50
-:10FF2000A7C389FB18450522DF72A1C3093E8F3C98
-:10FF3000EC5BDD3122DE51C5C5B65CF027619F1454
-:10FF4000217E91D72FEEE929071F2DC27DDE34F4E3
-:10FF50007FFCA81C8FA1BF5D1744DC61B7ADC3E96E
-:10FF600090E3A01F3E6E1AF863D16A2BDD3B6AB99D
-:10FF7000D0B882FA29B3F78DAB858C6BFDFA71A7E7
-:10FF80006B41E366F68AF84E8CEBD48DEBA7B86034
-:10FF9000DE1FC59F76C7B81271EE57F96294F3FC65
-:10FFA00043F2772A8A9C7E23E4808A934AB0C8F77A
-:10FFB000B8E5B985D7A3B8CC5DBD629DE79BFD359B
-:10FFC000D84FC5926F175B84DC64867017EE639719
-:10FFD000182F1F4FC6F9E405713E290E2BDD8EFD4B
-:10FFE000D86012FC86C5A9DF4BEB58F6735EEF773D
-:10FFF000F1C9F4FB6243130FB24C9C8F97CFCC81B5
-:020000023000CC
-:10000000DCE07AF719E0FB77AC5513BFC325DACFF4
-:100010009D1941F750BA0F8F28C4FE9913E67C8EC4
-:10002000F17DDB3BE92BDAA773A29D8538F1F41E45
-:10003000FE6F914F703E07FFAE957D45FAB9F2D73E
-:10004000DE12F0D7FE17C6A99F79CE22F4B31E7A2E
-:10005000A7F9BF2789F7E9B8FE4EFA47CF75F2DD59
-:10006000CD1C6721CA53CD3D51805BF7659378B7AE
-:1000700096F544DD14E49F7DAC5DBC671B4AD787D1
-:10008000270B39B03CD34EEF9D35245AAD94B65F63
-:100090009841BF07632ACDC4F9C06DE9DFEEF88B44
-:1000A000C9425EA56DB004FCEF5C7EB8C399CA7B03
-:1000B000D938C6767C3FBCEFFC051163192ECF639F
-:1000C000DEC4C78B4DBAFA6ED4EF2B67E29936D5F2
-:1000D0003EE765FBE3EB4C723CE07989B83F112ABF
-:1000E0002F1AA6C4F6BD57487237CE46F7AE328DEA
-:1000F000D29EC7EB3AC82E28FCB7C9FF61A338BA15
-:100100005D364187990691EE32C8785F69EF53E713
-:10011000981F4FF14C9A3298FAF1533FC6FDB9D06F
-:100120002B92581B8DAFF433558FEB61366232F250
-:10013000F7DE8A8C867EE1F9CEE4A9A5930B41D740
-:100140005EF651909C381F11D5148CBF06A3DEEECD
-:10015000F9CEE469D44EB5AF6F9ACE3EA278443F53
-:10016000D14F7DA681CEAD0D46F62AFDEE00EB20E7
-:100170007FA66AF72EE7931FD1BB0D6E4ADFE3FC23
-:10018000F223BAEF379FD20F9A3DF4FD647335A581
-:100190009DCD8DF4FDC3E6264A6FBE35B200F4BF97
-:1001A000FCD05AF651907CAC6F337B82EFD7BC3BCE
-:1001B000B57F3AFAFE64E1B77937ADFFF2FB55F946
-:1001C0006481CFEEC542CFE474B9CE113BB0BED04E
-:1001D0001D29EE25BC344D9C5FBB9344BE71B278A3
-:1001E0002FD46D60DBD0FEA56916CABF9B6EA077C9
-:1001F0001DDCB1A2DF77B30CA4A75D3F636A03E007
-:10020000E48EE7DFF302F977AF12E5EE21E2BB9A65
-:10021000AF2A9F34A5CF8E9025CEC7C2FFCEE99DD1
-:10022000FAEFC36FB1985F687D759F3E141EBF954E
-:10023000FB96F605F477EC83B4A07DD1E0A47DA114
-:10024000E850D15FC314B15F33C3249D73D945F027
-:10025000830CC3F938C146FE4137FC177C3DBB64B3
-:10026000BCFB15FB41FA03D47E50FB40D17B32DF4F
-:1002700067C2DF21D631C9D8BF9DFEA1C962DD1D8D
-:10028000F191A41F77B79B1D9037938CC2EFD0DDFF
-:100290003EAF00F7C24BEEB637F6C7BFDE94EDFFB8
-:1002A0006938287E30001CAE58BF45DAEDFFC1F535
-:1002B000137F03DF5E2CEE6586D26BFB64657717D8
-:1002C00074FBCE64F741D04FB76633E19CD26DEB3F
-:1002D000FF1EF94BD3C4BE50F4D33085C97768F8FC
-:1002E0003A33AEE4776A3D7DEB5CCA88EF65CA7845
-:1002F000E350FCAA7505F1BDD7270F0EC09331AEB0
-:10030000AFF07E86D6D9E99CAAE8F7FCE0AF96402C
-:100310007ECD9FEC147E268351BE072BE449DF7708
-:10032000CD487157417286416FE9392CFC717E7E50
-:100330004E823F0B36E8E0B86BCB14B1EEDEF985A8
-:1003400006D809CEFFC5EE85DC3A3FA4E724F49237
-:10035000F3DBC47BE7BCC7591AEE8D20FEC789DFEB
-:100360006D117E10E3C35F9E843EB4E46123E92FE8
-:10037000E7716CE6ED963F287EE74EDD1FAC93ED0E
-:100380005AB65DBC997EDF8CD327F49F8F6C0DE944
-:10039000D08BA73FFCE009BCBFBEE4390DE6667612
-:1003A0001476779EFF78AF51FCCEAA8C3B9921EF53
-:1003B000F7D7EC16F7FBEB106F02FDE5C08EADF83A
-:1003C000FDC9FABD6666E3DF67E09D343ECED2B676
-:1003D000487E90E4FD6ED1C78D5ECBBC1B604FAEF6
-:1003E000DEAEFF5EB34B9FAF0BB9B7A84D91BF67B1
-:1003F0003092E5D2FDC42DC25EACF8F695FAAE9708
-:10040000E0EB5EA9EEEB7E41EF7B1B0F7F99FAA13B
-:100410005DE467CB7C17CF9FFB52C05FC1AD41F25B
-:10042000FC7349ACA08DAFAFE1B0CD013B40C30B35
-:10043000C24E70BE2D9AE0BC3CBC93FC0AEC45A3B6
-:10044000037AD83D878C6457A86FB7FD0CBF4BDB90
-:10045000F09C46EFD5D61F0AF309F85C5882F2A546
-:10046000876C0E27CA5F0C63B03F9FE778C3BDD887
-:10047000F3299D847FE0157609FE370BBF5FA1F05D
-:100480006F7C58F893973C21F1B36D9589F0EAD3CE
-:100490005842DA95785278FE95E1A93E3CA1DDF408
-:1004A000877F7F5CE29D21DEE6E8B64AFA5D0C8537
-:1004B0006FCBE18F52A1F72A3C1B399E7FA8DA3B14
-:1004C000E57B785F83E76AE0D9FE8FE3F98F908F51
-:1004D00085A4F77EFC53E8BD9116F2A32BBB86B230
-:1004E0005B0CAE7DF7581C1F7878E2B3A4E796C783
-:1004F0009EA95FC1C88E76ED14D8D1AE7B033FEBC9
-:10050000CB7E77FD53B9A08F167327FD6E8C3746CF
-:10051000BC2BDF9D367BFBF37CBCE2D8AF52F7638C
-:10052000DFBC1C46EE93B9725FE2CF1AFC2E60BBB3
-:100530008DEC6DF5ED61C2BE7640EF3FEB4E12BF24
-:10054000D35762E9295F01BD9CF78771D479B0B6B2
-:100550005DFEFE8B3CBFD52A3BC3BE90F7A11C6F4E
-:1005600050BDBA2922DE36236192137CA86501F3BF
-:1005700084677C1DBF67C4EFD5EFE50DA8070EC0EB
-:10058000F795FEC7BC7A3B87E23F4BE5EF4BF6EDB4
-:100590000F99AF5EEB8DB21A89EEE8DD86BA47C5DA
-:1005A000EF2B7E02BA8B0AD053838C4F3BF6FDDFD4
-:1005B00098F03B4DDDBBC4FD08CE21B7E29EFED9CD
-:1005C00036110F5753D035C6EFC4EF74083EB46CE4
-:1005D0009FE673A6F54347CCB741BC6B1F424FFB68
-:1005E000BEFEDDC37B037C64D4DF393C77943029C5
-:1005F000B7BCFDC64FF6C9AF90DFF1F8DF16CFDD0F
-:100600009BC3D7F335FEC66B13F5EFB85CE7D4FF99
-:100610004ED377B2F5BFD3D46B97F091FAA0D253F3
-:100620000F4D11723C3455F0BDC1A51F479D8BBFC6
-:100630003B4E3FDE6CB77EBC6F8B977F555CEB37D4
-:10064000C1EFB81CF7841CF73772DC7F164E2A1DE9
-:1006500068BCFF5FD3FF0B8D21EA0800800000001B
-:100660001F8B080000000000000BB55B0B7C94D5CD
-:1006700095BFDF7CF3CC7308210904C224242160D8
-:10068000880324542B94C9D300D6065C2D688401BA
-:1006900052C83B80B5D2D6FE3208222F5BA8D1A229
-:1006A000224E82E1A1613B118289863A286411AD14
-:1006B0001B698BFDFD56DCF828F23213A374E55755
-:1006C0005DF6FCCFFD3E321942B5DDDDE4A737E72C
-:1006D000BEBE73CFFB9C7BA929CE317C394588DC1B
-:1006E0009873E69E08215CAB7A8A12B385E87B4357
-:1006F000154D0E2184DB7BBC3E5688DA8EE16253B9
-:1007000032C1257D6F1A00B78DB36FA2F18DED7FD9
-:10071000781BE3BD07558785C65F6BFF280AFB5C26
-:10072000FC325C88E158F7519420B8FAB2C2F02646
-:100730001A77103CAB5515FE4CDACFE83363FC62F8
-:10074000AA0E7BCD82DA929656730FB5557B5B79F4
-:10075000FC0D9F69F0F8DEC641E376CCA7B6CAE887
-:100760008DB2537BBE5DDFCFCFF3AB53159717FD33
-:100770007BFF10B70CF35ADE895B4AED15FCCCBC4D
-:10078000B6FDF4D00B996E5A57D341FB440CEC5391
-:10079000D361D2608977756A6B510CD14BB4282232
-:1007A0008D9A8B62AB584DF4AC6A6FAE16D45F95E0
-:1007B000718F49105D023EB518DFA71F8388A375AE
-:1007C00076FA8BE877D1F779D452DAF755DFB1DBD7
-:1007D0005DD4063A5F8FC2770307697EE6003ED399
-:1007E0005D44BF1CB4662146D0BA83AF4739687CEC
-:1007F000A3EF75496FA39FCFFD9A0607A8653AB787
-:10080000AB7CEE8A2F55A6BFBEDFAD2E95F799D5EE
-:100810009E1689739DF4C9EFCD7539647FEAE23283
-:10082000E07F2261418E9ACC78BB000726CE69DE3C
-:1008300044A854F968DFCC6BE9B654DBB7CB24E6A7
-:10084000FBC0B7D4035DA3483E4E140F9F4C235703
-:10085000E7DDE332F0BC22B33B7505CD3B19E188FF
-:10086000B4D37E0F158F8B045F5F438BFEE25D6612
-:1008700037B59507E5F74EDABBA3206F270F4E5526
-:100880003DCAC07E776ADF15C2C3ED00DF3CCCA74E
-:10089000726F6304F619E09FEC9FEBB2F3FC13DE7A
-:1008A00077EEBA87CE773223DC09BE749945B98FCB
-:1008B000E5843E82EF752636820EFAF7E6821FB493
-:1008C0002E906160BEF6B69BB479F7348B41F34C41
-:1008D000CCB78BCF0DC6C7EEFDE097F7D0FCEA672B
-:1008E0005461A1EE6AD38A389CFF931D83F12BD704
-:1008F000E85C6DF2C7C505C96B75C7557D8960F9A0
-:10090000EED0F5C3C1FCD4F978324395782558BCB4
-:100910008250AE6E6D66B92675F3D8A6702BECD4F6
-:10092000268677272B74FEC407ACCEB584FF738A66
-:10093000366EA03686608384CDD45AA97DC624FB4A
-:10094000A1B6583F86D8A9106C2A1E976348A17D8E
-:10095000D4D6C9E0EBAB335D8FBA088FCD334B668D
-:10096000CC043EA26F99A06FD65C8AF08868210AF9
-:10097000D5F79EC077FB0F9A04EC478DB5A3F263C1
-:1009800092D37E27290AE1DDBFC3E4F5B0FCB9228A
-:100990009469422CBB49EACD270EF734751CCD5F14
-:1009A00063E0F355B7A85E1BCDEBAD271210C93F2E
-:1009B0006D4DFE01E4B5FAB86AB7D2B9F37DC9BF8F
-:1009C0009A0EB8C5E4B4D0FA5A1F75125CBB57F141
-:1009D0003AE4FE027A597313CBBA3863AB4D11591E
-:1009E000D4AEE93363DE99C38A788CE66D0E8B6AE8
-:1009F00002DE3599B3CF2951D4AA5BD627D27ECB5C
-:100A0000B79B3EECB1CAB557E8BFBACE6D2CB7154F
-:100A1000DEC1FD557B07C335C23800D3FECDF8E3F8
-:100A20006621DA5C91B1676EA0BF2788095754D060
-:100A3000697A3CF4E104F84AF2241A88D82385B88C
-:100A40006F92331E7ABFD1E8980D3A043A4D76D0B2
-:100A5000ABEEF0810AE0EDAD0E731AE8A8B5AB5F1E
-:100A600061BA06BE20BADF486D82E0F30784A46F46
-:100A7000A05DCA799D49F15AB19E68C8FB5915EF2E
-:100A80001A1A0A78FAA3D83E09510CBD58B520C7E6
-:100A9000003B07351684CAAF747D506C46251AADED
-:100AA000D4FFEF197BD4614176E23F5D298C7F81D1
-:100AB00059B87DD47F5FA4331A723FD61A9505BC0E
-:100AC000C65A93BCA0FB5863DF1A7C7FF328C5F19C
-:100AD000106D7D24EBE5C90AE0DA0827E4444958A3
-:100AE0006C043D368F5A6C84BC8FB5FB324A32079A
-:100AF000E0028C431F8497BF5714E136E23BCF8D51
-:100B000054FC06DA3F6023FCA02746BB09F8054CDD
-:100B1000121662CD20FCC82231FCFF8E9F9DF08B07
-:100B200018C08FF81D8DF59F67137DA84D9A2B4433
-:100B300037DB85156C17747A5E24792F205EA52922
-:100B4000526EAA771C29C2788DE85E8F754551F2E6
-:100B50001C45380FE030D9AAB9925FB95A7B7FAEF5
-:100B6000F42FBAFDECC8751973A9DD9E5B62465B74
-:100B7000A866C6F70C61EF5729569693CF49FF60D8
-:100B80008FEF5DA1D8533306E45BD7AB3AD97555E7
-:100B90007FAA7EBFCB2C52F0395777068D970BA9D1
-:100BA000D78B56DBECA9C17A043D237A94DB2B6EFC
-:100BB00013A46FEED571F6D4A9D4AF5E340BC89EE2
-:100BC000A65FB1F47B256508FDF285E865FB60D87A
-:100BD0006F9372EE8F54BC6B09FFD4DCC17A97A47B
-:100BE000E941A35BE1F3357E6564D853AA7841F30C
-:100BF0003BA973758C7638CC2BCFF5C23FDE4960AC
-:100C000029FA1B62594F7990ECD7BF68E7BCD3E84B
-:100C10003F02FB71CCE44BB6D3D0B11AAB13FB2F20
-:100C20001014E8905D2B15DDDC9E0AAF6DF3F3E642
-:100C30009E3190AF77DD1627E2B0C6754D91B0E3D7
-:100C400059629DFD4C06820AB1F7CAD4EBC7332422
-:100C500038E28CCE1738628A53C06F9DAFDB735D6C
-:100C600079B939D75F5FF5A7B6DBBF03FB757FB3F3
-:100C7000395E8A4977C6B401BEE97CAD131EC65BF6
-:100C8000E7D755FE11EEA3410FF5E25CB633CFAACC
-:100C900082E30A8D7F56FA1D8A7F3A7D676A7C5807
-:100CA000DE21ED51285F757AFF9036C4F7C98FEECB
-:100CB000607E080BDBBF50BE7F135F28C22CC5507F
-:100CC0007EAC45809F8906691F1397919C10DEF7C3
-:100CD00008F7E11E6AEF0A7FCBC472A8F1E75EF065
-:100CE00087A6BE2BBCDFCF48FEBFE34F476EC903CC
-:100CF000C17A18AA77D7D3B36A87F3DF75BF47964F
-:100D000086F42B443F43F44FE7977B7514EBD9559A
-:100D10003EAA2D525F357E45D0EF90FA863FE87BA4
-:100D200035ED8AD79FFC2DF44F21C4896F8F85E85C
-:100D30009DCE9FEBD91DDD4E9D16FE63763AFFA931
-:100D4000141907787E62F136034E3794C3EE9D9AEC
-:100D500028DB039A7D0B6D4F539CA3901FDB94718E
-:100D60007204FCF529B3BE8FCDDB4CF89F5ED33DFA
-:100D70006625AD3F9D2BDB53880B83605798580445
-:100D8000BB7E7AA4C5033A9D5626E4C13F9C561EFD
-:100D9000B85DC2F16607E005F17976824F99E47C8F
-:100DA000DDAFE8F6FFF482EF14F03C451C053D1C76
-:100DB0008A28E1EF284A4C31E173FAFEB4296BC569
-:100DC000C0F99B720DBCCEABD96FC283E9DEF7537D
-:100DD000C5DB445D8BE05208FFE4BCDF14A750FF85
-:100DE000FB3F1B3719FC75AD1AFC7DF8EBE41B01CA
-:100DF0006FE37DBEF7659F6971905FBAEA270B3E8E
-:100E000093FD653906E84BB9C64357CC8468F0A713
-:100E1000DF3B2E1A7E47F743FDC70F44B883F876B1
-:100E20008EFC94181F044F783429D88F1DD9BD39F2
-:100E30001DFB949B3D594EEA3FDBF87412E28DF2A4
-:100E4000DD8FA4731CBC7B633AF299F2A6CDE92E28
-:100E500086C3DD9C4F19E5B92FECBF79D7A6A0B8A2
-:100E6000BB2A5F65FC4BAD470AE16F67DFF0E9C362
-:100E7000769A97F633C50EF1BA57743F0CFFB81047
-:100E8000F131F2B7062BDB73DACF05FE374FF8FEF0
-:100E900073D0E313191F99CA68DEE55C23D367A1F9
-:100EA000F06E89A771B141B1378BE0F9631A317FD8
-:100EB000F13AC59C003BB062D864D58175C3188FE8
-:100EC000251B2677A17FE183B27FB6C57BF024F690
-:100ED000F98DD9D9EC607B9352326900FFCBB966AA
-:100EE0005EB7688BC2F1BFFE9DB427E21A83CF794B
-:100EF00059E3BFF8CAA2802F3FD0F872DB83EF1C02
-:100F00004DA07DEDB1EE2BB01B6F3F7E26D54FFD82
-:100F10000531E73221E76966F75315387793C589BC
-:100F200073646725AAF1347FCA8F731F43BBE8C17E
-:100F3000C54F55C0DE6EB772DEA6E3B74A711A60C0
-:100F40008F5F6FFCE112D0EDECE3568EDB57358EF0
-:100F50008F1743E8A9DEEE21FE3B28D1D9576FE574
-:100F6000F6857ABB70903CECAF4F60F8B7F50E6E2B
-:100F7000C57C295FABB4FCF87AFB4DFD325C3828A8
-:100F80009ECDDE60130EB2534971AE517974CEB46A
-:100F900089354D1BB573A5D1FAC99EE47CD0217B60
-:100FA000E3CA2E84BCE63C998FBD797243128CF261
-:100FB000F2073FD85941E373F34AC6E551BF75C7FD
-:100FC000675C5778BDE39185A0777993459E4F3B49
-:100FD000F7D9C7D3E39FA2FD3D6F9838DFAFDBF1B0
-:100FE000C1CE8DD42EDDB2D21C2CEFDFF6BCC91AD7
-:100FF0003EDFA457D7A3C33FAE579B93587F9A4871
-:10100000AF32FF79BDAA7B700DD3EF81BC92D9A01E
-:10101000FB59932709FA7476C20C9673CF6185E960
-:10102000AFDB717D7DB176DE2A836FCBF4E4013BCB
-:101030007E4964337D8F747C928EB8F752FB82BFF9
-:101040007BEE43746E3F9DBB9DE8EB1F7FEDF83454
-:10105000B37B9C93CE37CD20E3DD6BE2D63C835649
-:101060002FE83697444A9A2BA8CB68FE93FC982722
-:101070009AF0A9EE54FC6159F067B79E3322DFA3C2
-:10108000BCF1C3E038827E3E0CF2DBD7C3F79BDABB
-:101090005AEC93366077BFF36783F007F9E99B7BDF
-:1010A000C2843FE8BB57F313EA33139F7A3B46B23F
-:1010B0005D00DF8CA8C7754C68027CCE2CF9D87B0C
-:1010C00088E22659C711EAB481739EEBB890053BBC
-:1010D0001B7ADEDA972FB07C54B73FF299C2E79FB4
-:1010E00075CE98F5CDE73FB2FB4216F877CED433F4
-:1010F0000DF956AFB9270B7CA87D45DAF37F940E26
-:101100007A7FC5063A08E979AD62653929542F72AC
-:10111000DDA0F7B8AC1BD476EC627BDADF29EB37C5
-:101120007586EEA278D43B567CD0057BD69F20F303
-:1011300028DADF05BA4D1FA7F941635FD25CB26BB5
-:101140002F5E950799FF9D85FE8EC73EBE6AD8012A
-:1011500091152E10579C873E53FFC2D5C9EB21E74E
-:1011600067BD23A6C03EBE99F5B75AAEF7BD1A6E4D
-:101170005739EEA1DE20FE5D3D875715AE41F58063
-:1011800070E10A9A576776FC80E3E313AA405C5744
-:101190003751EA937859EA53CDBA23E684A0FD7615
-:1011A000429F186F192FCE7EF56FAC975B66BA3AE7
-:1011B000A197E1B085D82F21DAAB28DA3CE27FADE8
-:1011C000864344A796F717AB3C5ED7AE8A915893F7
-:1011D00010E94DA373148BAD46C4D3B3856F3AEABF
-:1011E00036C2D8F3CB5B687CCEABEAD44D82F3A792
-:1011F00045259C57BA5357213E32281A5D7DD97335
-:1012000083FD599EF453D35585FD58DFC8708E5326
-:1012100066CDAF2905BEFABCAC61721EEDC37196F6
-:10122000F0F665CD857EFAFBB2E6450ECCBBEBD57C
-:10123000F015EC17852FFBAEA0EF84E5CBFAE8E7BD
-:10124000E4472027759764BDA350FDEA09C4E7ABC6
-:101250000E93BC203E3424BF6B801D273A83AF170A
-:1012600088AF2EF81FB770B9A03F934678A13F759D
-:10127000FB1561449DA8C3D2843A52ADA9270EF252
-:10128000BCB1FD4F66C8735DDB3B66C724AC977588
-:10129000275248B6E3759AFFAA691FFF2EEA7C35EC
-:1012A000C7A517AD31BEC3F97BD5C156CED3AB852B
-:1012B0009FF3F4EA96C1F2D29FE0E0BA48A87E8498
-:1012C000E53B06E9C5ACED522FEE52C50AD839A16F
-:1012D000D5696725C4733C32B04EC6BB2EF5C2C378
-:1012E000885F02298A53A1AD02619E75888B3CE913
-:1012F000329E09FCEE85EC656C57BCD977D0B902FB
-:101300005ABC3B6BC336A31A84CFAC4E59970C849E
-:1013100089F243CC6FF768F041B84A22F27358AFB4
-:10132000B26057030659470D3D47BD562F3A817AA3
-:1013300052E600DE731213A51D135E969F2E83FCEA
-:10134000BECB40E35306D62FC997EB07F2215907CE
-:10135000BB9E5DD94DFC2923FEEC253EA37D9EFC62
-:101360007119D99916F2C780FF95FC315A5F7D0635
-:10137000F7BF58EF64F860FD4D0C1FAA7731DC5EB3
-:101380005FCCEDCBF525DC7F02A87E17FF7BBA1181
-:10139000F2D0051D1B35009F8A0981470D9E7F2ACB
-:1013A00046190C8F52787E76FED38D1ED48B66DA6A
-:1013B00035FD764422FE3A6B9375A8B33659876A99
-:1013C0001DE5BE259FC6CB66ADDD2DF350573AE631
-:1013D00015C42CE0FCB59FF257D8A395F9EE3CF06C
-:1013E000E5F8F1FCD46D6C276D5C073D75F70DD108
-:1013F0005C077C83F271FA746EC6D475D904E74633
-:10140000282CBF642F6E2CD1F34ADA27BF53DEA3FA
-:1014100014AAD565D87FD548DB54D8DFCF5DEEDB85
-:1014200080874EEFA251CB53110F75991CEFA28EFE
-:10143000EBF9BD49209FD2EB7DFABC0E57EEDD588B
-:10144000372B63DCBA29B03BA464B0732EB36801B8
-:101450005E2E43B8B296ED96C3083B70B726C779A7
-:101460000E1917FBCD0E630CEA3761B9B11E5AD7BE
-:10147000A5F1F9B8C6E7131A9FDF429D8CDAB7A928
-:101480001F6D37F5A39D01FA4A7965BA3D91575210
-:10149000C6F22BFA9200EB75C1D9D02F696F92205A
-:1014A000D75B34F94DD0EC4D576E49955CE7E37D41
-:1014B000AAB47ADB05ED1E443FAFBE6E60BDE07698
-:1014C000DE8DC263859D7F49E69D6234C52304CFCE
-:1014D0007B299EED906ABD23F363D2F37953651E99
-:1014E000200E58E4BC04470EF464AD566FEDF51AB7
-:1014F0003C26D4A763BAD363E07F35FDD2E143FF36
-:10150000ADB2BDAE994230B5AF28F27C35F3BAD357
-:101510008761BD6233707DBB498E9FD4F4AF264591
-:10152000DB4F3B8FB0FA92C08FC0E197929610BC10
-:1015300029C2BF4CDA7D7F3ADB6BE14F9F07BBA826
-:10154000F8DE174E8A2B0BA62E318E043D7C3B0114
-:101550005717E42C31DE8CF1D6F7EDC1E3237C493B
-:101560008A1D70B61C1FD1BA7398330836BDF83E79
-:10157000C6CD869C250504CFB1788FD7436E7E2BD0
-:10158000E5CBB6BFED0CE856D521E3F6BCFD6D17F3
-:101590005F845F6E8B74C2BCEFCB4F667AAFEDD8C1
-:1015A000B305F2D6DB2AEF0336B5FC69E7CF799EA7
-:1015B00005D724B4AF2F5BD077561EFDE362E0352C
-:1015C00027DCF705E0878ECE643CE70C977AFDC8F0
-:1015D000D1BC25D0D3DEB6FD3F81FECD89A68016D5
-:1015E000F8BC60E33A44E5810905D0D3DEC8EE8556
-:1015F000D8BFF6798B13725A79203E0FF58143F9E3
-:10160000B21E5E31716B12FCACE1E57DBB7F8EFBDF
-:10161000D5E76D7C2F541723E3BC4AB571DA4AE64F
-:10162000DFAEDD4F03EF7D36BE9FAD40AD8AE08A71
-:10163000DD695CC77FE5EB8F16820F85EA8EDDE8FA
-:10164000FFE2399B017438697645CF801E9E347164
-:10165000BE59A1C115A7864B7CC27B8A987FB15B1E
-:1016600093E0672B87FFF476E03D47DDBA13F98EF0
-:10167000D863E1BB8973FB886EB4EE5CB3690AB8CA
-:10168000DCBB2FD20879B9A06C5DF814F66F96F325
-:101690002ED8B6323D3DCDE305BE47F304ECD6056A
-:1016A00065DBA0FE73CD7BB2908F9E7F7E0EE7A59B
-:1016B000BAFCEAFA52F99C65905F644B40F6A85276
-:1016C000FB5BD83D2282FC6D85069E3FF464EF53A0
-:1016D0006260FDF91693DF4C34AAB08875D6980184
-:1016E0007DA84CBCB518E7AB3434A6236EA998DAB4
-:1016F000B3107A71CE26AC0934EF4DCD6F551E5C18
-:101700003317F1EFF5F0B9A2D9A34B09D27F5D6A87
-:10171000B77983EF2543DBF7EA85FDADB401F8DE49
-:1017200015168EE1F5FDDE34FBAA91A7D5C648FB60
-:10173000F13ECD6F213BF6B5E6EF16AD1E3CBF3F47
-:101740003F86BF5F6BEE4987FFD3F70FE46B7EC325
-:10175000D8930E7B15BA6E0EC211D8911714B6230A
-:101760009507950F54A253A5D5E355411761D6CFE0
-:1017700069BCA2C87509D334BAD3DA0D05C9FCDD3A
-:10178000CA169BCB46EBAAC27AA210175547F6445D
-:1017900021DEE97D59154D1ABB62E334FEA4682CA5
-:1017A0000BAA3756F84C2E5BD6107C46FC44F396B9
-:1017B000E36FFAFE3305297C9EF2F670FE9EB0F7C9
-:1017C0004C839C96EF18BC0EE7B207E95F6FFBAE47
-:1017D000B8E0BC3C45C33BA07CC07A12F8FAC324F5
-:1017E000F0BDD220D6E1FEF23CADC1BD26C1C22A79
-:1017F00061BEF7ACFC6B4418E4E5FCA56AD6DB5E81
-:10180000A587EDDADB0573D92EF59A7AD8AEBD7EC1
-:10181000F42EB60FBDC37A16C24EBD5DB05C8E8F7E
-:10182000EC59E8A0F1FD3A3C46B0DF7FEF680DDBF4
-:101830008F39AA7C57217699ECB21EB4E1543DE76A
-:1018400017264770FE7DBA40ABF70CF087F32E5D8C
-:101850006F7A8563FF41E8617904D775288E6A79CC
-:1018600011F1DE823827DE6B94639D940373F07D63
-:10187000636CCCE565E0CF1DA3DD450539B8DFEC31
-:10188000E13C82A49AFD4DEDEF2C9C4F064C7DBBB4
-:1018900061A7D247BB6717101ED5E6EEF5D984D2F3
-:1018A00045534F174AE4B355698FC41E2957BD9954
-:1018B000BBE43D8D765F79B7467F41494C23E442D6
-:1018C00091FC7DBDFDC05BB02BBDDDE3D81E87EA7A
-:1018D000CDB9F6C7A2601FFE4C7EDC1394EFFF79F2
-:1018E000F11EBE679D8FF720D42E5937581EFABFC0
-:1018F000BA83F33EB125A81F72D830180E9523C8BD
-:10190000A37F90DDF130DDB76B7A5595D75D0B3A4B
-:101910005C85E711AC06C1AF85C021F345898C1306
-:10192000B6C3FF133DAAC7F84F719EBEDF2460C740
-:10193000D792FF62B82DDC8B7CC5B09FFC53ACF412
-:101940004FF00B5551DD5C9FEA6DB3F07DEF431D09
-:101950009F24E1FC24875C87A9EA78290EF9FB3EE5
-:101960002D5F203F18C7EF63DA3AE29077E8FDD5A4
-:10197000065F3AF0A28888E375BDBF46F5A703FF6E
-:101980002AA53B0BE3FBF2EDDA7C8255C082CF51F6
-:10199000AD487D171D2ADBF350BE3DA9C92BD98563
-:1019A0002C7EDFF1B2AC0FE876A042B327AFA13FA7
-:1019B00053EABD5DBF57A2A515D0F721EC43428184
-:1019C0001E17AFE0FACDE3050E096BEB795F595FA7
-:1019D000E2F1DA572E64A564629D362FD80E8D1B76
-:1019E000B02BD0FF04D6FF874C7174AECA9D8A73AA
-:1019F0002DEC54E99A229A2E961B571671DD4C78DD
-:101A0000386F0BC52B548E2617483A551A8615C6C3
-:101A100006ED779E6C7AC214B6337ED89D1FC53E04
-:101A20005A843AC50F4BE5BB81ABFE2658CF719E59
-:101A30001DD28E436DAE18AE95E3E52B1AD7C70FB6
-:101A40008147289E15EEC6A238C7B5FD3ABEE76DA0
-:101A50003A7E79A611C17498BFA66804B5CBADFFD4
-:101A60002C1DE479CF7758FCF0AB15A52BD7470F89
-:101A70002137D7F8831D41FE2B05FCF5F2FDC6F595
-:101A8000F00F6DAB15FF29D48B04E95533EB17E943
-:101A90004B905FB8B920A4EE50BE782CE26AE15EAC
-:101AA0003C167E86F46AA17388FC920CE42803BF7E
-:101AB00019F1701B8ACF5F0AE4BBA49B0BA49E6F35
-:101AC00099E90AC06ECE500D1C8787EEF765818CB0
-:101AD00027BAE322EFD7DF7380D9335449B74443A1
-:101AE000FFDBD0B7C4B84807EE830AF3C3E5BCC335
-:101AF000363BEA3781C397B9BE1B783862BEBC3724
-:101B000088102369BC2B615253B01FF975A13C6F3B
-:101B100078B68C5BEA324C7FBF3E941979B53EC4EF
-:101B200071436638DF97F4B67FCE7E2BD09963C7BA
-:101B3000BD466F376587A44F755FFF571CFC6B6F01
-:101B4000E75FF81D5AEF579FF0FBB48DDAFBC0D763
-:101B5000DAB5F75DDD8E48F4078A3F2AC2BC4D5ADC
-:101B60003B502790F562BDD5F35FBD1E1094078FE3
-:101B70002E1C3A0F8E714704D7091CF143D55582AC
-:101B8000EB04A969B24E801675825493AC130046DB
-:101B90009D002DEA04E8479D0030EA0480512700AB
-:101BA0008C3A015AD409D0FFC57CF95E2640422CFC
-:101BB000EB97116CDFEF6B56BD88CFEF3B2CEFA19D
-:101BC000EE6B54F89DD645FA3EFCDC35EF750E6A97
-:101BD000EF757CDBF85EAFAE4D75825575A6BE63C2
-:101BE000A8EBD4B52ACE35B02FF5F3F9FB1B3B7328
-:101BF000DE2D457FB3C96970804F97E250AFAAECE4
-:101C00006CE6FA5341FC6133F3B74511A897DE65E2
-:101C100091796E8D4ABD53F83E94E3E01A4B37E755
-:101C20001F557B157B59F07DEE4D9FB11D586B8B79
-:101C30006A029E353E9BBD6C88F71F7C2FEC1057C7
-:101C4000EF9B97C929A226A288EF9B97E19E995AFC
-:101C5000A17E65E4FB634A4C87431EF1AE2A03660E
-:101C6000DD2EF53EE43D556567EBFA4471ED3D34FC
-:101C70002A03E07FE8FDB3BB3032F64C380C859880
-:101C80008CB8A9F8F1B2FD6DF4BDFEAD168E3B56D1
-:101C9000E6BB97438E8E995C5C273976D8C6F9D11E
-:101CA000C7DBC60FAA937CEE725717F2FDFC68AE35
-:101CB0005BAC3229EC97F38BC7C5F3BB81E326F607
-:101CC0003F1DAE925ACC5B35C9C1F5A9428BB89F76
-:101CD000F7D1DE6951CBFA54B856F11A085E2C9C44
-:101CE00066E8CF22221BCB8B296203DE532D12F232
-:101CF0007D832E37ABB6291C1770A1200EF7929268
-:101D0000BE8B3AFFED32DE2F2CB5C8F835D120EF6F
-:101D1000B31337C9F72D3F126E33FCED72F28B68A7
-:101D2000C94FFEAE87FADDE1A393647CEE88C7FE5F
-:101D30008B4F98F8BD6F61FCF7D3DDECAF0BF81D4E
-:101D400083E2BF47BD72C3F5F527F41DC33193B4D9
-:101D50002F4447CE8BBA20975C9F71737BA2BE9CA9
-:101D6000DB1933A59DBEFA2E91786407FEE17DEF65
-:101D7000235F4C8C8F74C2DEE97A7FCDFBC430D9EF
-:101D8000EAEF13C7502B82DE276E713978FF44C308
-:101D9000C9A90ED0E3AF114ED0437FA7B86566C97D
-:101DA0002EF0C915253CF82EEE51B6125D8B701041
-:101DB00005756E9F4B45DDFAB062E777D1D7D8C97C
-:101DC0006D0FE31D4F5DAA62571CA8876F2D8C23F2
-:101DD000BC8B529219EFBA76592F650AC5A19EAEF7
-:101DE000E983CBDD563862A07F8EA617BD345FCA6B
-:101DF000C92D5EC8DBB7A8A33E87F91E6173366B99
-:101E0000F91AF83EE786315C4FD5E5A6BF25BE0935
-:101E100072F346A1F433A5A5EF98100774E5BA8FC5
-:101E2000E2FC0BCB3E7B388ECF37741D8BEC28DF6A
-:101E30004B86D6B174BBBC5BAB83C37E1AB53AABE1
-:101E400051ABB31AB53AAB51ABB31AB53AAB51ABD0
-:101E5000B31AB53AAB51ABB31AB53AAB91EB772B9A
-:101E6000B87DBB7E35B7DDF51E1E0FB2FFEF5DC737
-:101E7000FE87D6413FC2BCD03AA8B03AA2D98F92D1
-:101E80007ECBFA7348DDB378F8920D44BFFC06B3FD
-:101E9000135D7A1D14EF97EF8B607B70B170C8FAF9
-:101EA000A74EB708AE97F60BDB14D03F2F639CD13B
-:101EB00040E37FD5F8A0D71FA11F381FF4032DF4EE
-:101EC000C39836A01FCF984985B3A5BFF7B0BFB759
-:101ED000315FD7AF21FB41F052611F643F2E86D89E
-:101EE0000F4A3CEE061ECB3AE5BB26FDFD661E35CD
-:101EF0005F4E19C29EF8A43D1913E6DB87EF8CA94B
-:101F00000DE3F7C1C7B4F758C736CA777165A28425
-:101F1000BF3B845D89023F960EEF7BFF699ABF74D9
-:101F20007304C72DEB472E9BF6BFB12B9F150AA656
-:101F3000DB6FEAFD951F132E056152FE0ACC2203CA
-:101F4000F735C210C67A50A86E51703FBAEA5E31BA
-:101F5000197C2EB094EC009EF1DAFDB688D5EAAD7E
-:101F6000C6EE8A3D049F8C4B74E25E6B74C2218185
-:101F7000F74F8575C599B08BFE31EE09453978BFAD
-:101F8000BC55C1FAF04C79FE3B8AC39B205781C3F4
-:101F9000E373C0EF7916471BEA00CEA284A5C8F30D
-:101FA000E7453B72500770768D9270BCA34D71224D
-:101FB000944D585AC0EFCFAC5B3FB6E2DD9A22A2F7
-:101FC000E95C9661EE1C7CA7A6F85399378B3EF628
-:101FD000633717C9FC6BC46BC28F7BABBE59917C56
-:101FE0007F26321D3918A7B8F2BB45241F7FFC9EFF
-:101FF000EB16AC4FD4F08CC72DA20AAE76DBD09E88
-:10200000D0EEF3BA0CEE52B445511E23F71BBCD9E7
-:1020100068DF34F87E8C7E92E722EC57F4D8E489AE
-:102020001904275A7C6C273B5CAE5BB1FFAB335D78
-:10203000C5180FAD9F83B7C8F3099FDB302FF41D80
-:1020400096CECFA54552EECB8AA4FD98BE56DEC7EC
-:1020500086F2BDACC8A0D9B7BF8F37E15B8AEFE984
-:10206000F88BAD8BB3810FE17B2FF0247C17625C82
-:1020700044C470BDE3FA72E6E1EF951549F9227B9D
-:1020800056F5B1B467DCA61BBDC3103F8EFA857749
-:1020900018F01DD5D867C3BFC378D6D367837F7FB9
-:1020A000F6C13E1BFA9F75C977D2A1FB3716C9F757
-:1020B00013E9D3FB78FD58FA5637C7E97DC31047BB
-:1020C000A5977FBC5EDEBB64B07F19ABF997B1BF4B
-:1020D0004869EF21791BFB6434DF6F8B82581EAF98
-:1020E000B44A3DADFC45D9A1366AC76F277C83E26F
-:1020F000AF095EC27B505C64EC97EF2D09069DF63C
-:102100009A1886CC22BEAA11F2BDE528CD6E206EAB
-:102110002B25BB50537EF432BF03C07AEC8F3B5B60
-:10212000C85FBB49C2E4AE918F2E9FBFA68BF3C39D
-:10213000ED57FBB57CB3753DF2678ADF06F5579620
-:102140001DE982BFA9DA3BB8BF66C5679CC752FCD0
-:1021500036A8FFDE1F7FC0EF6CEADA07F7137F9F18
-:10216000029F75FE1E33F92620DF3B5613E694FFCF
-:102170007EC0B712FADE541DC1EF6777FD3A8FE5D6
-:1021800046E737AD6FFA76F2B196E77BF24406F494
-:10219000E19BDA5ED8A7B441F6C9C375BED9916C8C
-:1021A00077EAB4FCAAB6CCCE7E3EB1D6CAF6AB5026
-:1021B0000D7302AE354A3B238A55CD4EF958FF4F79
-:1021C000DE3E8CEB797C00C03193F8DD71DC5A097E
-:1021D000F78DB0B07D28349454EFA1F6A86105DBEB
-:1021E0008104BCB824BE3F03FBA0427F655DB5CE31
-:1021F000EC53E4FDBE2307F9AE7EDFD4B0D1DB7A29
-:1022000010F9B2E27D7219EA8A7746F0FD4100F5D5
-:10221000463A4FC33069471B16A4B31F088892D2B1
-:10222000958843E68771FDB16198E351DC27365408
-:102230004CE438FAD07F4BBFDB37D7EA441CD530AB
-:10224000D9B106EF551A7EE1E0F15714B99FE75175
-:10225000499F86B9F2FC0D15319CF7E87C686874DB
-:102260008DC4FDD4CC31EEFF00DF4769F7730DC993
-:10227000D44FED134AC9821F619F4912DF19331DE4
-:10228000AC77C7164C7C74B783DD891FF74475B3F0
-:102290002307E5C5FF033C759D8B10370000000048
-:1022A0000000000000000000050207000000000020
-:00000001FF
diff --git a/fs/9p/v9fs.h b/fs/9p/v9fs.h
index 79000bf62491..6b801d1ddf4b 100644
--- a/fs/9p/v9fs.h
+++ b/fs/9p/v9fs.h
@@ -24,7 +24,7 @@
 /**
  * enum p9_session_flags - option flags for each 9P session
  * @V9FS_PROTO_2000U: whether or not to use 9P2000.u extensions
- * @V9FS_PROTO_2010L: whether or not to use 9P2010.l extensions
+ * @V9FS_PROTO_2000L: whether or not to use 9P2000.l extensions
  * @V9FS_ACCESS_SINGLE: only the mounting user can access the hierarchy
  * @V9FS_ACCESS_USER: a new attach will be issued for every user (default)
  * @V9FS_ACCESS_ANY: use a single attach for all users
@@ -34,7 +34,7 @@
  */
 enum p9_session_flags {
 	V9FS_PROTO_2000U	= 0x01,
-	V9FS_PROTO_2010L	= 0x02,
+	V9FS_PROTO_2000L	= 0x02,
 	V9FS_ACCESS_SINGLE	= 0x04,
 	V9FS_ACCESS_USER	= 0x08,
 	V9FS_ACCESS_ANY		= 0x0C,
@@ -130,5 +130,5 @@ static inline int v9fs_proto_dotu(struct v9fs_session_info *v9ses)
 
 static inline int v9fs_proto_dotl(struct v9fs_session_info *v9ses)
 {
-	return v9ses->flags & V9FS_PROTO_2010L;
+	return v9ses->flags & V9FS_PROTO_2000L;
 }
diff --git a/fs/9p/vfs_dir.c b/fs/9p/vfs_dir.c
index 6580aa449541..d8a3afe4ff72 100644
--- a/fs/9p/vfs_dir.c
+++ b/fs/9p/vfs_dir.c
@@ -76,6 +76,15 @@ static inline int dt_type(struct p9_wstat *mistat)
 	return rettype;
 }
 
+static void p9stat_init(struct p9_wstat *stbuf)
+{
+	stbuf->name  = NULL;
+	stbuf->uid   = NULL;
+	stbuf->gid   = NULL;
+	stbuf->muid  = NULL;
+	stbuf->extension = NULL;
+}
+
 /**
  * v9fs_dir_readdir - read a directory
  * @filp: opened file structure
@@ -131,8 +140,8 @@ static int v9fs_dir_readdir(struct file *filp, void *dirent, filldir_t filldir)
 			rdir->head = 0;
 			rdir->tail = err;
 		}
-
 		while (rdir->head < rdir->tail) {
+			p9stat_init(&st);
 			err = p9stat_read(rdir->buf + rdir->head,
 						buflen - rdir->head, &st,
 						fid->clnt->proto_version);
diff --git a/fs/9p/vfs_file.c b/fs/9p/vfs_file.c
index 36122683fae8..df52d488d2a6 100644
--- a/fs/9p/vfs_file.c
+++ b/fs/9p/vfs_file.c
@@ -114,7 +114,7 @@ static int v9fs_file_lock(struct file *filp, int cmd, struct file_lock *fl)
 	P9_DPRINTK(P9_DEBUG_VFS, "filp: %p lock: %p\n", filp, fl);
 
 	/* No mandatory locks */
-	if (__mandatory_lock(inode))
+	if (__mandatory_lock(inode) && fl->fl_type != F_UNLCK)
 		return -ENOLCK;
 
 	if ((IS_SETLK(cmd) || IS_SETLKW(cmd)) && fl->fl_type != F_UNLCK) {
@@ -215,7 +215,7 @@ v9fs_file_write(struct file *filp, const char __user * data,
 	struct p9_fid *fid;
 	struct p9_client *clnt;
 	struct inode *inode = filp->f_path.dentry->d_inode;
-	int origin = *offset;
+	loff_t origin = *offset;
 	unsigned long pg_start, pg_end;
 
 	P9_DPRINTK(P9_DEBUG_VFS, "data %p count %d offset %x\n", data,
diff --git a/fs/Kconfig b/fs/Kconfig
index 7405f071be67..5f85b5947613 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -235,6 +235,7 @@ config NFS_COMMON
 
 source "net/sunrpc/Kconfig"
 source "fs/smbfs/Kconfig"
+source "fs/ceph/Kconfig"
 source "fs/cifs/Kconfig"
 source "fs/ncpfs/Kconfig"
 source "fs/coda/Kconfig"
diff --git a/fs/Makefile b/fs/Makefile
index c3633aa46911..97f340f14ba2 100644
--- a/fs/Makefile
+++ b/fs/Makefile
@@ -125,3 +125,4 @@ obj-$(CONFIG_OCFS2_FS)		+= ocfs2/
 obj-$(CONFIG_BTRFS_FS)		+= btrfs/
 obj-$(CONFIG_GFS2_FS)           += gfs2/
 obj-$(CONFIG_EXOFS_FS)          += exofs/
+obj-$(CONFIG_CEPH_FS)		+= ceph/
diff --git a/fs/affs/bitmap.c b/fs/affs/bitmap.c
index dc5ef14bdc1c..8306d53307ed 100644
--- a/fs/affs/bitmap.c
+++ b/fs/affs/bitmap.c
@@ -128,7 +128,7 @@ err_range:
 /*
  * Allocate a block in the given allocation zone.
  * Since we have to byte-swap the bitmap on little-endian
- * machines, this is rather expensive. Therefor we will
+ * machines, this is rather expensive. Therefore we will
  * preallocate up to 16 blocks from the same word, if
  * possible. We are not doing preallocations in the
  * header zone, though.
diff --git a/fs/anon_inodes.c b/fs/anon_inodes.c
index 9f0bf13291e5..2de009565d8e 100644
--- a/fs/anon_inodes.c
+++ b/fs/anon_inodes.c
@@ -209,6 +209,7 @@ static struct inode *anon_inode_mkinode(void)
 	inode->i_mode = S_IRUSR | S_IWUSR;
 	inode->i_uid = current_fsuid();
 	inode->i_gid = current_fsgid();
+	inode->i_flags |= S_PRIVATE;
 	inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
 	return inode;
 }
diff --git a/fs/binfmt_elf_fdpic.c b/fs/binfmt_elf_fdpic.c
index 6d6a16c5e9bb..2c32d00a6690 100644
--- a/fs/binfmt_elf_fdpic.c
+++ b/fs/binfmt_elf_fdpic.c
@@ -1374,7 +1374,7 @@ static inline void fill_note(struct memelfnote *note, const char *name, int type
 
 /*
  * fill up all the fields in prstatus from the given task struct, except
- * registers which need to be filled up seperately.
+ * registers which need to be filled up separately.
  */
 static void fill_prstatus(struct elf_prstatus *prstatus,
 			  struct task_struct *p, long signr)
diff --git a/fs/bio.c b/fs/bio.c
index dc17afd672e3..e1f922184b45 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -264,13 +264,12 @@ EXPORT_SYMBOL(bio_init);
  * bio_alloc_bioset - allocate a bio for I/O
  * @gfp_mask:   the GFP_ mask given to the slab allocator
  * @nr_iovecs:	number of iovecs to pre-allocate
- * @bs:		the bio_set to allocate from. If %NULL, just use kmalloc
+ * @bs:		the bio_set to allocate from.
  *
  * Description:
- *   bio_alloc_bioset will first try its own mempool to satisfy the allocation.
+ *   bio_alloc_bioset will try its own mempool to satisfy the allocation.
  *   If %__GFP_WAIT is set then we will block on the internal pool waiting
- *   for a &struct bio to become free. If a %NULL @bs is passed in, we will
- *   fall back to just using @kmalloc to allocate the required memory.
+ *   for a &struct bio to become free.
  *
  *   Note that the caller must set ->bi_destructor on successful return
  *   of a bio, to do the appropriate freeing of the bio once the reference
diff --git a/fs/btrfs/btrfs_inode.h b/fs/btrfs/btrfs_inode.h
index 3f1f50d9d916..7a4dee199832 100644
--- a/fs/btrfs/btrfs_inode.h
+++ b/fs/btrfs/btrfs_inode.h
@@ -153,6 +153,11 @@ struct btrfs_inode {
 	unsigned ordered_data_close:1;
 	unsigned dummy_inode:1;
 
+	/*
+	 * always compress this one file
+	 */
+	unsigned force_compress:1;
+
 	struct inode vfs_inode;
 };
 
diff --git a/fs/btrfs/compression.c b/fs/btrfs/compression.c
index a11a32058b50..28b92a7218ab 100644
--- a/fs/btrfs/compression.c
+++ b/fs/btrfs/compression.c
@@ -478,7 +478,7 @@ static noinline int add_ra_bio_pages(struct inode *inode,
 			goto next;
 		}
 
-		page = alloc_page(mapping_gfp_mask(mapping) | GFP_NOFS);
+		page = alloc_page(mapping_gfp_mask(mapping) & ~__GFP_FS);
 		if (!page)
 			break;
 
diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
index 8b5cfdd4bfc1..0af2e3868573 100644
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -373,11 +373,13 @@ struct btrfs_super_block {
  * ones specified below then we will fail to mount
  */
 #define BTRFS_FEATURE_INCOMPAT_MIXED_BACKREF	(1ULL << 0)
+#define BTRFS_FEATURE_INCOMPAT_DEFAULT_SUBVOL	(2ULL << 0)
 
 #define BTRFS_FEATURE_COMPAT_SUPP		0ULL
 #define BTRFS_FEATURE_COMPAT_RO_SUPP		0ULL
 #define BTRFS_FEATURE_INCOMPAT_SUPP		\
-	BTRFS_FEATURE_INCOMPAT_MIXED_BACKREF
+	(BTRFS_FEATURE_INCOMPAT_MIXED_BACKREF |	\
+	 BTRFS_FEATURE_INCOMPAT_DEFAULT_SUBVOL)
 
 /*
  * A leaf is full of items. offset and size tell us where to find
@@ -1182,7 +1184,6 @@ struct btrfs_root {
 #define BTRFS_INODE_NOATIME		(1 << 9)
 #define BTRFS_INODE_DIRSYNC		(1 << 10)
 
-
 /* some macros to generate set/get funcs for the struct fields.  This
  * assumes there is a lefoo_to_cpu for every type, so lets make a simple
  * one for u8:
@@ -1842,7 +1843,7 @@ BTRFS_SETGET_STACK_FUNCS(super_num_devices, struct btrfs_super_block,
 BTRFS_SETGET_STACK_FUNCS(super_compat_flags, struct btrfs_super_block,
 			 compat_flags, 64);
 BTRFS_SETGET_STACK_FUNCS(super_compat_ro_flags, struct btrfs_super_block,
-			 compat_flags, 64);
+			 compat_ro_flags, 64);
 BTRFS_SETGET_STACK_FUNCS(super_incompat_flags, struct btrfs_super_block,
 			 incompat_flags, 64);
 BTRFS_SETGET_STACK_FUNCS(super_csum_type, struct btrfs_super_block,
@@ -2310,7 +2311,8 @@ int btrfs_truncate_inode_items(struct btrfs_trans_handle *trans,
 			       u32 min_type);
 
 int btrfs_start_delalloc_inodes(struct btrfs_root *root, int delay_iput);
-int btrfs_set_extent_delalloc(struct inode *inode, u64 start, u64 end);
+int btrfs_set_extent_delalloc(struct inode *inode, u64 start, u64 end,
+			      struct extent_state **cached_state);
 int btrfs_writepages(struct address_space *mapping,
 		     struct writeback_control *wbc);
 int btrfs_create_subvol_root(struct btrfs_trans_handle *trans,
@@ -2335,7 +2337,7 @@ int btrfs_init_cachep(void);
 void btrfs_destroy_cachep(void);
 long btrfs_ioctl_trans_end(struct file *file);
 struct inode *btrfs_iget(struct super_block *s, struct btrfs_key *location,
-			 struct btrfs_root *root);
+			 struct btrfs_root *root, int *was_new);
 int btrfs_commit_write(struct file *file, struct page *page,
 		       unsigned from, unsigned to);
 struct extent_map *btrfs_get_extent(struct inode *inode, struct page *page,
@@ -2386,7 +2388,6 @@ void btrfs_sysfs_del_super(struct btrfs_fs_info *root);
 ssize_t btrfs_listxattr(struct dentry *dentry, char *buffer, size_t size);
 
 /* super.c */
-u64 btrfs_parse_size(char *str);
 int btrfs_parse_options(struct btrfs_root *root, char *options);
 int btrfs_sync_fs(struct super_block *sb, int wait);
 
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index 2b59201b955c..11d0ad30e203 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -263,13 +263,15 @@ static int csum_tree_block(struct btrfs_root *root, struct extent_buffer *buf,
 static int verify_parent_transid(struct extent_io_tree *io_tree,
 				 struct extent_buffer *eb, u64 parent_transid)
 {
+	struct extent_state *cached_state = NULL;
 	int ret;
 
 	if (!parent_transid || btrfs_header_generation(eb) == parent_transid)
 		return 0;
 
-	lock_extent(io_tree, eb->start, eb->start + eb->len - 1, GFP_NOFS);
-	if (extent_buffer_uptodate(io_tree, eb) &&
+	lock_extent_bits(io_tree, eb->start, eb->start + eb->len - 1,
+			 0, &cached_state, GFP_NOFS);
+	if (extent_buffer_uptodate(io_tree, eb, cached_state) &&
 	    btrfs_header_generation(eb) == parent_transid) {
 		ret = 0;
 		goto out;
@@ -282,10 +284,10 @@ static int verify_parent_transid(struct extent_io_tree *io_tree,
 		       (unsigned long long)btrfs_header_generation(eb));
 	}
 	ret = 1;
-	clear_extent_buffer_uptodate(io_tree, eb);
+	clear_extent_buffer_uptodate(io_tree, eb, &cached_state);
 out:
-	unlock_extent(io_tree, eb->start, eb->start + eb->len - 1,
-		      GFP_NOFS);
+	unlock_extent_cached(io_tree, eb->start, eb->start + eb->len - 1,
+			     &cached_state, GFP_NOFS);
 	return ret;
 }
 
@@ -901,7 +903,7 @@ static int __setup_root(u32 nodesize, u32 leafsize, u32 sectorsize,
 	root->highest_objectid = 0;
 	root->name = NULL;
 	root->in_sysfs = 0;
-	root->inode_tree.rb_node = NULL;
+	root->inode_tree = RB_ROOT;
 
 	INIT_LIST_HEAD(&root->dirty_list);
 	INIT_LIST_HEAD(&root->orphan_list);
@@ -1673,7 +1675,7 @@ struct btrfs_root *open_ctree(struct super_block *sb,
 	insert_inode_hash(fs_info->btree_inode);
 
 	spin_lock_init(&fs_info->block_group_cache_lock);
-	fs_info->block_group_cache_tree.rb_node = NULL;
+	fs_info->block_group_cache_tree = RB_ROOT;
 
 	extent_io_tree_init(&fs_info->freed_extents[0],
 			     fs_info->btree_inode->i_mapping, GFP_NOFS);
@@ -2497,7 +2499,8 @@ int btrfs_buffer_uptodate(struct extent_buffer *buf, u64 parent_transid)
 	int ret;
 	struct inode *btree_inode = buf->first_page->mapping->host;
 
-	ret = extent_buffer_uptodate(&BTRFS_I(btree_inode)->io_tree, buf);
+	ret = extent_buffer_uptodate(&BTRFS_I(btree_inode)->io_tree, buf,
+				     NULL);
 	if (!ret)
 		return ret;
 
diff --git a/fs/btrfs/export.c b/fs/btrfs/export.c
index ba5c3fd5ab8c..951ef09b82f4 100644
--- a/fs/btrfs/export.c
+++ b/fs/btrfs/export.c
@@ -95,7 +95,7 @@ static struct dentry *btrfs_get_dentry(struct super_block *sb, u64 objectid,
 	btrfs_set_key_type(&key, BTRFS_INODE_ITEM_KEY);
 	key.offset = 0;
 
-	inode = btrfs_iget(sb, &key, root);
+	inode = btrfs_iget(sb, &key, root, NULL);
 	if (IS_ERR(inode)) {
 		err = PTR_ERR(inode);
 		goto fail;
@@ -223,7 +223,7 @@ static struct dentry *btrfs_get_parent(struct dentry *child)
 
 	key.type = BTRFS_INODE_ITEM_KEY;
 	key.offset = 0;
-	dentry = d_obtain_alias(btrfs_iget(root->fs_info->sb, &key, root));
+	dentry = d_obtain_alias(btrfs_iget(root->fs_info->sb, &key, root, NULL));
 	if (!IS_ERR(dentry))
 		dentry->d_op = &btrfs_dentry_operations;
 	return dentry;
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index 559f72489b3b..1727b26fb194 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -6561,6 +6561,7 @@ static noinline int invalidate_extent_cache(struct btrfs_root *root,
 	struct btrfs_key key;
 	struct inode *inode = NULL;
 	struct btrfs_file_extent_item *fi;
+	struct extent_state *cached_state = NULL;
 	u64 num_bytes;
 	u64 skip_objectid = 0;
 	u32 nritems;
@@ -6589,12 +6590,14 @@ static noinline int invalidate_extent_cache(struct btrfs_root *root,
 		}
 		num_bytes = btrfs_file_extent_num_bytes(leaf, fi);
 
-		lock_extent(&BTRFS_I(inode)->io_tree, key.offset,
-			    key.offset + num_bytes - 1, GFP_NOFS);
+		lock_extent_bits(&BTRFS_I(inode)->io_tree, key.offset,
+				 key.offset + num_bytes - 1, 0, &cached_state,
+				 GFP_NOFS);
 		btrfs_drop_extent_cache(inode, key.offset,
 					key.offset + num_bytes - 1, 1);
-		unlock_extent(&BTRFS_I(inode)->io_tree, key.offset,
-			      key.offset + num_bytes - 1, GFP_NOFS);
+		unlock_extent_cached(&BTRFS_I(inode)->io_tree, key.offset,
+				     key.offset + num_bytes - 1, &cached_state,
+				     GFP_NOFS);
 		cond_resched();
 	}
 	iput(inode);
diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c
index b177ed319612..c99121ac5d6b 100644
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -104,8 +104,8 @@ void extent_io_exit(void)
 void extent_io_tree_init(struct extent_io_tree *tree,
 			  struct address_space *mapping, gfp_t mask)
 {
-	tree->state.rb_node = NULL;
-	tree->buffer.rb_node = NULL;
+	tree->state = RB_ROOT;
+	tree->buffer = RB_ROOT;
 	tree->ops = NULL;
 	tree->dirty_bytes = 0;
 	spin_lock_init(&tree->lock);
@@ -513,7 +513,10 @@ int clear_extent_bit(struct extent_io_tree *tree, u64 start, u64 end,
 	u64 last_end;
 	int err;
 	int set = 0;
+	int clear = 0;
 
+	if (bits & (EXTENT_IOBITS | EXTENT_BOUNDARY))
+		clear = 1;
 again:
 	if (!prealloc && (mask & __GFP_WAIT)) {
 		prealloc = alloc_extent_state(mask);
@@ -524,14 +527,20 @@ again:
 	spin_lock(&tree->lock);
 	if (cached_state) {
 		cached = *cached_state;
-		*cached_state = NULL;
-		cached_state = NULL;
+
+		if (clear) {
+			*cached_state = NULL;
+			cached_state = NULL;
+		}
+
 		if (cached && cached->tree && cached->start == start) {
-			atomic_dec(&cached->refs);
+			if (clear)
+				atomic_dec(&cached->refs);
 			state = cached;
 			goto hit_next;
 		}
-		free_extent_state(cached);
+		if (clear)
+			free_extent_state(cached);
 	}
 	/*
 	 * this search will find the extents that end after
@@ -946,11 +955,11 @@ int clear_extent_bits(struct extent_io_tree *tree, u64 start, u64 end,
 }
 
 int set_extent_delalloc(struct extent_io_tree *tree, u64 start, u64 end,
-		     gfp_t mask)
+			struct extent_state **cached_state, gfp_t mask)
 {
 	return set_extent_bit(tree, start, end,
 			      EXTENT_DELALLOC | EXTENT_DIRTY | EXTENT_UPTODATE,
-			      0, NULL, NULL, mask);
+			      0, NULL, cached_state, mask);
 }
 
 int clear_extent_dirty(struct extent_io_tree *tree, u64 start, u64 end,
@@ -984,10 +993,11 @@ int set_extent_uptodate(struct extent_io_tree *tree, u64 start, u64 end,
 }
 
 static int clear_extent_uptodate(struct extent_io_tree *tree, u64 start,
-				 u64 end, gfp_t mask)
+				 u64 end, struct extent_state **cached_state,
+				 gfp_t mask)
 {
 	return clear_extent_bit(tree, start, end, EXTENT_UPTODATE, 0, 0,
-				NULL, mask);
+				cached_state, mask);
 }
 
 int wait_on_extent_writeback(struct extent_io_tree *tree, u64 start, u64 end)
@@ -1171,7 +1181,8 @@ out:
  * 1 is returned if we find something, 0 if nothing was in the tree
  */
 static noinline u64 find_delalloc_range(struct extent_io_tree *tree,
-					u64 *start, u64 *end, u64 max_bytes)
+					u64 *start, u64 *end, u64 max_bytes,
+					struct extent_state **cached_state)
 {
 	struct rb_node *node;
 	struct extent_state *state;
@@ -1203,8 +1214,11 @@ static noinline u64 find_delalloc_range(struct extent_io_tree *tree,
 				*end = state->end;
 			goto out;
 		}
-		if (!found)
+		if (!found) {
 			*start = state->start;
+			*cached_state = state;
+			atomic_inc(&state->refs);
+		}
 		found++;
 		*end = state->end;
 		cur_start = state->end + 1;
@@ -1336,10 +1350,11 @@ again:
 	delalloc_start = *start;
 	delalloc_end = 0;
 	found = find_delalloc_range(tree, &delalloc_start, &delalloc_end,
-				    max_bytes);
+				    max_bytes, &cached_state);
 	if (!found || delalloc_end <= *start) {
 		*start = delalloc_start;
 		*end = delalloc_end;
+		free_extent_state(cached_state);
 		return found;
 	}
 
@@ -1722,7 +1737,7 @@ static void end_bio_extent_writepage(struct bio *bio, int err)
 		}
 
 		if (!uptodate) {
-			clear_extent_uptodate(tree, start, end, GFP_NOFS);
+			clear_extent_uptodate(tree, start, end, NULL, GFP_NOFS);
 			ClearPageUptodate(page);
 			SetPageError(page);
 		}
@@ -1750,7 +1765,8 @@ static void end_bio_extent_writepage(struct bio *bio, int err)
 static void end_bio_extent_readpage(struct bio *bio, int err)
 {
 	int uptodate = test_bit(BIO_UPTODATE, &bio->bi_flags);
-	struct bio_vec *bvec = bio->bi_io_vec + bio->bi_vcnt - 1;
+	struct bio_vec *bvec_end = bio->bi_io_vec + bio->bi_vcnt - 1;
+	struct bio_vec *bvec = bio->bi_io_vec;
 	struct extent_io_tree *tree;
 	u64 start;
 	u64 end;
@@ -1773,7 +1789,7 @@ static void end_bio_extent_readpage(struct bio *bio, int err)
 		else
 			whole_page = 0;
 
-		if (--bvec >= bio->bi_io_vec)
+		if (++bvec <= bvec_end)
 			prefetchw(&bvec->bv_page->flags);
 
 		if (uptodate && tree->ops && tree->ops->readpage_end_io_hook) {
@@ -1818,7 +1834,7 @@ static void end_bio_extent_readpage(struct bio *bio, int err)
 			}
 			check_page_locked(tree, page);
 		}
-	} while (bvec >= bio->bi_io_vec);
+	} while (bvec <= bvec_end);
 
 	bio_put(bio);
 }
@@ -2704,6 +2720,7 @@ int extent_readpages(struct extent_io_tree *tree,
 int extent_invalidatepage(struct extent_io_tree *tree,
 			  struct page *page, unsigned long offset)
 {
+	struct extent_state *cached_state = NULL;
 	u64 start = ((u64)page->index << PAGE_CACHE_SHIFT);
 	u64 end = start + PAGE_CACHE_SIZE - 1;
 	size_t blocksize = page->mapping->host->i_sb->s_blocksize;
@@ -2712,12 +2729,12 @@ int extent_invalidatepage(struct extent_io_tree *tree,
 	if (start > end)
 		return 0;
 
-	lock_extent(tree, start, end, GFP_NOFS);
+	lock_extent_bits(tree, start, end, 0, &cached_state, GFP_NOFS);
 	wait_on_page_writeback(page);
 	clear_extent_bit(tree, start, end,
 			 EXTENT_LOCKED | EXTENT_DIRTY | EXTENT_DELALLOC |
 			 EXTENT_DO_ACCOUNTING,
-			 1, 1, NULL, GFP_NOFS);
+			 1, 1, &cached_state, GFP_NOFS);
 	return 0;
 }
 
@@ -2920,16 +2937,17 @@ sector_t extent_bmap(struct address_space *mapping, sector_t iblock,
 		get_extent_t *get_extent)
 {
 	struct inode *inode = mapping->host;
+	struct extent_state *cached_state = NULL;
 	u64 start = iblock << inode->i_blkbits;
 	sector_t sector = 0;
 	size_t blksize = (1 << inode->i_blkbits);
 	struct extent_map *em;
 
-	lock_extent(&BTRFS_I(inode)->io_tree, start, start + blksize - 1,
-		    GFP_NOFS);
+	lock_extent_bits(&BTRFS_I(inode)->io_tree, start, start + blksize - 1,
+			 0, &cached_state, GFP_NOFS);
 	em = get_extent(inode, NULL, 0, start, blksize, 0);
-	unlock_extent(&BTRFS_I(inode)->io_tree, start, start + blksize - 1,
-		      GFP_NOFS);
+	unlock_extent_cached(&BTRFS_I(inode)->io_tree, start,
+			     start + blksize - 1, &cached_state, GFP_NOFS);
 	if (!em || IS_ERR(em))
 		return 0;
 
@@ -2951,6 +2969,7 @@ int extent_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo,
 	u32 flags = 0;
 	u64 disko = 0;
 	struct extent_map *em = NULL;
+	struct extent_state *cached_state = NULL;
 	int end = 0;
 	u64 em_start = 0, em_len = 0;
 	unsigned long emflags;
@@ -2959,8 +2978,8 @@ int extent_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo,
 	if (len == 0)
 		return -EINVAL;
 
-	lock_extent(&BTRFS_I(inode)->io_tree, start, start + len,
-		GFP_NOFS);
+	lock_extent_bits(&BTRFS_I(inode)->io_tree, start, start + len, 0,
+			 &cached_state, GFP_NOFS);
 	em = get_extent(inode, NULL, 0, off, max - off, 0);
 	if (!em)
 		goto out;
@@ -3023,8 +3042,8 @@ int extent_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo,
 out_free:
 	free_extent_map(em);
 out:
-	unlock_extent(&BTRFS_I(inode)->io_tree, start, start + len,
-			GFP_NOFS);
+	unlock_extent_cached(&BTRFS_I(inode)->io_tree, start, start + len,
+			     &cached_state, GFP_NOFS);
 	return ret;
 }
 
@@ -3264,7 +3283,8 @@ int set_extent_buffer_dirty(struct extent_io_tree *tree,
 }
 
 int clear_extent_buffer_uptodate(struct extent_io_tree *tree,
-				struct extent_buffer *eb)
+				struct extent_buffer *eb,
+				struct extent_state **cached_state)
 {
 	unsigned long i;
 	struct page *page;
@@ -3274,7 +3294,7 @@ int clear_extent_buffer_uptodate(struct extent_io_tree *tree,
 	clear_bit(EXTENT_BUFFER_UPTODATE, &eb->bflags);
 
 	clear_extent_uptodate(tree, eb->start, eb->start + eb->len - 1,
-			      GFP_NOFS);
+			      cached_state, GFP_NOFS);
 	for (i = 0; i < num_pages; i++) {
 		page = extent_buffer_page(eb, i);
 		if (page)
@@ -3334,7 +3354,8 @@ int extent_range_uptodate(struct extent_io_tree *tree,
 }
 
 int extent_buffer_uptodate(struct extent_io_tree *tree,
-			   struct extent_buffer *eb)
+			   struct extent_buffer *eb,
+			   struct extent_state *cached_state)
 {
 	int ret = 0;
 	unsigned long num_pages;
@@ -3346,7 +3367,7 @@ int extent_buffer_uptodate(struct extent_io_tree *tree,
 		return 1;
 
 	ret = test_range_bit(tree, eb->start, eb->start + eb->len - 1,
-			   EXTENT_UPTODATE, 1, NULL);
+			   EXTENT_UPTODATE, 1, cached_state);
 	if (ret)
 		return ret;
 
diff --git a/fs/btrfs/extent_io.h b/fs/btrfs/extent_io.h
index 36de250a7b2b..bbab4813646f 100644
--- a/fs/btrfs/extent_io.h
+++ b/fs/btrfs/extent_io.h
@@ -163,6 +163,8 @@ int lock_extent(struct extent_io_tree *tree, u64 start, u64 end, gfp_t mask);
 int lock_extent_bits(struct extent_io_tree *tree, u64 start, u64 end,
 		     int bits, struct extent_state **cached, gfp_t mask);
 int unlock_extent(struct extent_io_tree *tree, u64 start, u64 end, gfp_t mask);
+int unlock_extent_cached(struct extent_io_tree *tree, u64 start, u64 end,
+			 struct extent_state **cached, gfp_t mask);
 int try_lock_extent(struct extent_io_tree *tree, u64 start, u64 end,
 		    gfp_t mask);
 int extent_read_full_page(struct extent_io_tree *tree, struct page *page,
@@ -196,7 +198,7 @@ int clear_extent_ordered(struct extent_io_tree *tree, u64 start, u64 end,
 int clear_extent_ordered_metadata(struct extent_io_tree *tree, u64 start,
 				  u64 end, gfp_t mask);
 int set_extent_delalloc(struct extent_io_tree *tree, u64 start, u64 end,
-		     gfp_t mask);
+			struct extent_state **cached_state, gfp_t mask);
 int set_extent_ordered(struct extent_io_tree *tree, u64 start, u64 end,
 		     gfp_t mask);
 int find_first_extent_bit(struct extent_io_tree *tree, u64 start,
@@ -281,9 +283,11 @@ int test_extent_buffer_dirty(struct extent_io_tree *tree,
 int set_extent_buffer_uptodate(struct extent_io_tree *tree,
 			       struct extent_buffer *eb);
 int clear_extent_buffer_uptodate(struct extent_io_tree *tree,
-				struct extent_buffer *eb);
+				struct extent_buffer *eb,
+				struct extent_state **cached_state);
 int extent_buffer_uptodate(struct extent_io_tree *tree,
-			   struct extent_buffer *eb);
+			   struct extent_buffer *eb,
+			   struct extent_state *cached_state);
 int map_extent_buffer(struct extent_buffer *eb, unsigned long offset,
 		      unsigned long min_len, char **token, char **map,
 		      unsigned long *map_start,
diff --git a/fs/btrfs/extent_map.c b/fs/btrfs/extent_map.c
index 428fcac45f90..28d87ba60ce8 100644
--- a/fs/btrfs/extent_map.c
+++ b/fs/btrfs/extent_map.c
@@ -35,7 +35,7 @@ void extent_map_exit(void)
  */
 void extent_map_tree_init(struct extent_map_tree *tree, gfp_t mask)
 {
-	tree->map.rb_node = NULL;
+	tree->map = RB_ROOT;
 	rwlock_init(&tree->lock);
 }
 
diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index 6ed434ac037f..ee3323c7fc1c 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -123,7 +123,8 @@ static noinline int dirty_and_release_pages(struct btrfs_trans_handle *trans,
 		    root->sectorsize - 1) & ~((u64)root->sectorsize - 1);
 
 	end_of_last_block = start_pos + num_bytes - 1;
-	err = btrfs_set_extent_delalloc(inode, start_pos, end_of_last_block);
+	err = btrfs_set_extent_delalloc(inode, start_pos, end_of_last_block,
+					NULL);
 	if (err)
 		return err;
 
@@ -753,6 +754,7 @@ static noinline int prepare_pages(struct btrfs_root *root, struct file *file,
 			 loff_t pos, unsigned long first_index,
 			 unsigned long last_index, size_t write_bytes)
 {
+	struct extent_state *cached_state = NULL;
 	int i;
 	unsigned long index = pos >> PAGE_CACHE_SHIFT;
 	struct inode *inode = fdentry(file)->d_inode;
@@ -781,16 +783,18 @@ again:
 	}
 	if (start_pos < inode->i_size) {
 		struct btrfs_ordered_extent *ordered;
-		lock_extent(&BTRFS_I(inode)->io_tree,
-			    start_pos, last_pos - 1, GFP_NOFS);
+		lock_extent_bits(&BTRFS_I(inode)->io_tree,
+				 start_pos, last_pos - 1, 0, &cached_state,
+				 GFP_NOFS);
 		ordered = btrfs_lookup_first_ordered_extent(inode,
 							    last_pos - 1);
 		if (ordered &&
 		    ordered->file_offset + ordered->len > start_pos &&
 		    ordered->file_offset < last_pos) {
 			btrfs_put_ordered_extent(ordered);
-			unlock_extent(&BTRFS_I(inode)->io_tree,
-				      start_pos, last_pos - 1, GFP_NOFS);
+			unlock_extent_cached(&BTRFS_I(inode)->io_tree,
+					     start_pos, last_pos - 1,
+					     &cached_state, GFP_NOFS);
 			for (i = 0; i < num_pages; i++) {
 				unlock_page(pages[i]);
 				page_cache_release(pages[i]);
@@ -802,12 +806,13 @@ again:
 		if (ordered)
 			btrfs_put_ordered_extent(ordered);
 
-		clear_extent_bits(&BTRFS_I(inode)->io_tree, start_pos,
+		clear_extent_bit(&BTRFS_I(inode)->io_tree, start_pos,
 				  last_pos - 1, EXTENT_DIRTY | EXTENT_DELALLOC |
-				  EXTENT_DO_ACCOUNTING,
+				  EXTENT_DO_ACCOUNTING, 0, 0, &cached_state,
 				  GFP_NOFS);
-		unlock_extent(&BTRFS_I(inode)->io_tree,
-			      start_pos, last_pos - 1, GFP_NOFS);
+		unlock_extent_cached(&BTRFS_I(inode)->io_tree,
+				     start_pos, last_pos - 1, &cached_state,
+				     GFP_NOFS);
 	}
 	for (i = 0; i < num_pages; i++) {
 		clear_page_dirty_for_io(pages[i]);
diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c
index cb2849f03251..dd831ed31eea 100644
--- a/fs/btrfs/free-space-cache.c
+++ b/fs/btrfs/free-space-cache.c
@@ -870,7 +870,7 @@ __btrfs_return_cluster_to_free_space(
 		tree_insert_offset(&block_group->free_space_offset,
 				   entry->offset, &entry->offset_index, 0);
 	}
-	cluster->root.rb_node = NULL;
+	cluster->root = RB_ROOT;
 
 out:
 	spin_unlock(&cluster->lock);
@@ -1355,7 +1355,7 @@ void btrfs_init_free_cluster(struct btrfs_free_cluster *cluster)
 {
 	spin_lock_init(&cluster->lock);
 	spin_lock_init(&cluster->refill_lock);
-	cluster->root.rb_node = NULL;
+	cluster->root = RB_ROOT;
 	cluster->max_size = 0;
 	cluster->points_to_bitmap = false;
 	INIT_LIST_HEAD(&cluster->block_group_list);
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index c41db6d45ab6..02bb099845fd 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -379,7 +379,8 @@ again:
 	 * change at any time if we discover bad compression ratios.
 	 */
 	if (!(BTRFS_I(inode)->flags & BTRFS_INODE_NOCOMPRESS) &&
-	    btrfs_test_opt(root, COMPRESS)) {
+	    (btrfs_test_opt(root, COMPRESS) ||
+	     (BTRFS_I(inode)->force_compress))) {
 		WARN_ON(pages);
 		pages = kzalloc(sizeof(struct page *) * nr_pages, GFP_NOFS);
 
@@ -483,8 +484,10 @@ again:
 		nr_pages_ret = 0;
 
 		/* flag the file so we don't compress in the future */
-		if (!btrfs_test_opt(root, FORCE_COMPRESS))
+		if (!btrfs_test_opt(root, FORCE_COMPRESS) &&
+		    !(BTRFS_I(inode)->force_compress)) {
 			BTRFS_I(inode)->flags |= BTRFS_INODE_NOCOMPRESS;
+		}
 	}
 	if (will_compress) {
 		*num_added += 1;
@@ -570,8 +573,8 @@ retry:
 			unsigned long nr_written = 0;
 
 			lock_extent(io_tree, async_extent->start,
-				    async_extent->start +
-				    async_extent->ram_size - 1, GFP_NOFS);
+					 async_extent->start +
+					 async_extent->ram_size - 1, GFP_NOFS);
 
 			/* allocate blocks */
 			ret = cow_file_range(inode, async_cow->locked_page,
@@ -1211,7 +1214,8 @@ static int run_delalloc_range(struct inode *inode, struct page *locked_page,
 	else if (BTRFS_I(inode)->flags & BTRFS_INODE_PREALLOC)
 		ret = run_delalloc_nocow(inode, locked_page, start, end,
 					 page_started, 0, nr_written);
-	else if (!btrfs_test_opt(root, COMPRESS))
+	else if (!btrfs_test_opt(root, COMPRESS) &&
+		 !(BTRFS_I(inode)->force_compress))
 		ret = cow_file_range(inode, locked_page, start, end,
 				      page_started, nr_written, 1);
 	else
@@ -1508,12 +1512,13 @@ static noinline int add_pending_csums(struct btrfs_trans_handle *trans,
 	return 0;
 }
 
-int btrfs_set_extent_delalloc(struct inode *inode, u64 start, u64 end)
+int btrfs_set_extent_delalloc(struct inode *inode, u64 start, u64 end,
+			      struct extent_state **cached_state)
 {
 	if ((end & (PAGE_CACHE_SIZE - 1)) == 0)
 		WARN_ON(1);
 	return set_extent_delalloc(&BTRFS_I(inode)->io_tree, start, end,
-				   GFP_NOFS);
+				   cached_state, GFP_NOFS);
 }
 
 /* see btrfs_writepage_start_hook for details on why this is required */
@@ -1526,6 +1531,7 @@ static void btrfs_writepage_fixup_worker(struct btrfs_work *work)
 {
 	struct btrfs_writepage_fixup *fixup;
 	struct btrfs_ordered_extent *ordered;
+	struct extent_state *cached_state = NULL;
 	struct page *page;
 	struct inode *inode;
 	u64 page_start;
@@ -1544,7 +1550,8 @@ again:
 	page_start = page_offset(page);
 	page_end = page_offset(page) + PAGE_CACHE_SIZE - 1;
 
-	lock_extent(&BTRFS_I(inode)->io_tree, page_start, page_end, GFP_NOFS);
+	lock_extent_bits(&BTRFS_I(inode)->io_tree, page_start, page_end, 0,
+			 &cached_state, GFP_NOFS);
 
 	/* already ordered? We're done */
 	if (PagePrivate2(page))
@@ -1552,17 +1559,18 @@ again:
 
 	ordered = btrfs_lookup_ordered_extent(inode, page_start);
 	if (ordered) {
-		unlock_extent(&BTRFS_I(inode)->io_tree, page_start,
-			      page_end, GFP_NOFS);
+		unlock_extent_cached(&BTRFS_I(inode)->io_tree, page_start,
+				     page_end, &cached_state, GFP_NOFS);
 		unlock_page(page);
 		btrfs_start_ordered_extent(inode, ordered, 1);
 		goto again;
 	}
 
-	btrfs_set_extent_delalloc(inode, page_start, page_end);
+	btrfs_set_extent_delalloc(inode, page_start, page_end, &cached_state);
 	ClearPageChecked(page);
 out:
-	unlock_extent(&BTRFS_I(inode)->io_tree, page_start, page_end, GFP_NOFS);
+	unlock_extent_cached(&BTRFS_I(inode)->io_tree, page_start, page_end,
+			     &cached_state, GFP_NOFS);
 out_page:
 	unlock_page(page);
 	page_cache_release(page);
@@ -1691,14 +1699,14 @@ static int btrfs_finish_ordered_io(struct inode *inode, u64 start, u64 end)
 	struct btrfs_trans_handle *trans;
 	struct btrfs_ordered_extent *ordered_extent = NULL;
 	struct extent_io_tree *io_tree = &BTRFS_I(inode)->io_tree;
+	struct extent_state *cached_state = NULL;
 	int compressed = 0;
 	int ret;
 
-	ret = btrfs_dec_test_ordered_pending(inode, start, end - start + 1);
+	ret = btrfs_dec_test_ordered_pending(inode, &ordered_extent, start,
+					     end - start + 1);
 	if (!ret)
 		return 0;
-
-	ordered_extent = btrfs_lookup_ordered_extent(inode, start);
 	BUG_ON(!ordered_extent);
 
 	if (test_bit(BTRFS_ORDERED_NOCOW, &ordered_extent->flags)) {
@@ -1713,9 +1721,9 @@ static int btrfs_finish_ordered_io(struct inode *inode, u64 start, u64 end)
 		goto out;
 	}
 
-	lock_extent(io_tree, ordered_extent->file_offset,
-		    ordered_extent->file_offset + ordered_extent->len - 1,
-		    GFP_NOFS);
+	lock_extent_bits(io_tree, ordered_extent->file_offset,
+			 ordered_extent->file_offset + ordered_extent->len - 1,
+			 0, &cached_state, GFP_NOFS);
 
 	trans = btrfs_join_transaction(root, 1);
 
@@ -1742,9 +1750,10 @@ static int btrfs_finish_ordered_io(struct inode *inode, u64 start, u64 end)
 				   ordered_extent->len);
 		BUG_ON(ret);
 	}
-	unlock_extent(io_tree, ordered_extent->file_offset,
-		    ordered_extent->file_offset + ordered_extent->len - 1,
-		    GFP_NOFS);
+	unlock_extent_cached(io_tree, ordered_extent->file_offset,
+			     ordered_extent->file_offset +
+			     ordered_extent->len - 1, &cached_state, GFP_NOFS);
+
 	add_pending_csums(trans, inode, ordered_extent->file_offset,
 			  &ordered_extent->list);
 
@@ -2153,7 +2162,7 @@ void btrfs_orphan_cleanup(struct btrfs_root *root)
 		found_key.objectid = found_key.offset;
 		found_key.type = BTRFS_INODE_ITEM_KEY;
 		found_key.offset = 0;
-		inode = btrfs_iget(root->fs_info->sb, &found_key, root);
+		inode = btrfs_iget(root->fs_info->sb, &found_key, root, NULL);
 		if (IS_ERR(inode))
 			break;
 
@@ -3081,6 +3090,7 @@ static int btrfs_truncate_page(struct address_space *mapping, loff_t from)
 	struct btrfs_root *root = BTRFS_I(inode)->root;
 	struct extent_io_tree *io_tree = &BTRFS_I(inode)->io_tree;
 	struct btrfs_ordered_extent *ordered;
+	struct extent_state *cached_state = NULL;
 	char *kaddr;
 	u32 blocksize = root->sectorsize;
 	pgoff_t index = from >> PAGE_CACHE_SHIFT;
@@ -3127,12 +3137,14 @@ again:
 	}
 	wait_on_page_writeback(page);
 
-	lock_extent(io_tree, page_start, page_end, GFP_NOFS);
+	lock_extent_bits(io_tree, page_start, page_end, 0, &cached_state,
+			 GFP_NOFS);
 	set_page_extent_mapped(page);
 
 	ordered = btrfs_lookup_ordered_extent(inode, page_start);
 	if (ordered) {
-		unlock_extent(io_tree, page_start, page_end, GFP_NOFS);
+		unlock_extent_cached(io_tree, page_start, page_end,
+				     &cached_state, GFP_NOFS);
 		unlock_page(page);
 		page_cache_release(page);
 		btrfs_start_ordered_extent(inode, ordered, 1);
@@ -3140,13 +3152,15 @@ again:
 		goto again;
 	}
 
-	clear_extent_bits(&BTRFS_I(inode)->io_tree, page_start, page_end,
+	clear_extent_bit(&BTRFS_I(inode)->io_tree, page_start, page_end,
 			  EXTENT_DIRTY | EXTENT_DELALLOC | EXTENT_DO_ACCOUNTING,
-			  GFP_NOFS);
+			  0, 0, &cached_state, GFP_NOFS);
 
-	ret = btrfs_set_extent_delalloc(inode, page_start, page_end);
+	ret = btrfs_set_extent_delalloc(inode, page_start, page_end,
+					&cached_state);
 	if (ret) {
-		unlock_extent(io_tree, page_start, page_end, GFP_NOFS);
+		unlock_extent_cached(io_tree, page_start, page_end,
+				     &cached_state, GFP_NOFS);
 		goto out_unlock;
 	}
 
@@ -3159,7 +3173,8 @@ again:
 	}
 	ClearPageChecked(page);
 	set_page_dirty(page);
-	unlock_extent(io_tree, page_start, page_end, GFP_NOFS);
+	unlock_extent_cached(io_tree, page_start, page_end, &cached_state,
+			     GFP_NOFS);
 
 out_unlock:
 	if (ret)
@@ -3177,6 +3192,7 @@ int btrfs_cont_expand(struct inode *inode, loff_t size)
 	struct btrfs_root *root = BTRFS_I(inode)->root;
 	struct extent_io_tree *io_tree = &BTRFS_I(inode)->io_tree;
 	struct extent_map *em;
+	struct extent_state *cached_state = NULL;
 	u64 mask = root->sectorsize - 1;
 	u64 hole_start = (inode->i_size + mask) & ~mask;
 	u64 block_end = (size + mask) & ~mask;
@@ -3192,11 +3208,13 @@ int btrfs_cont_expand(struct inode *inode, loff_t size)
 		struct btrfs_ordered_extent *ordered;
 		btrfs_wait_ordered_range(inode, hole_start,
 					 block_end - hole_start);
-		lock_extent(io_tree, hole_start, block_end - 1, GFP_NOFS);
+		lock_extent_bits(io_tree, hole_start, block_end - 1, 0,
+				 &cached_state, GFP_NOFS);
 		ordered = btrfs_lookup_ordered_extent(inode, hole_start);
 		if (!ordered)
 			break;
-		unlock_extent(io_tree, hole_start, block_end - 1, GFP_NOFS);
+		unlock_extent_cached(io_tree, hole_start, block_end - 1,
+				     &cached_state, GFP_NOFS);
 		btrfs_put_ordered_extent(ordered);
 	}
 
@@ -3241,7 +3259,8 @@ int btrfs_cont_expand(struct inode *inode, loff_t size)
 			break;
 	}
 
-	unlock_extent(io_tree, hole_start, block_end - 1, GFP_NOFS);
+	unlock_extent_cached(io_tree, hole_start, block_end - 1, &cached_state,
+			     GFP_NOFS);
 	return err;
 }
 
@@ -3639,6 +3658,7 @@ static noinline void init_btrfs_i(struct inode *inode)
 	bi->index_cnt = (u64)-1;
 	bi->last_unlink_trans = 0;
 	bi->ordered_data_close = 0;
+	bi->force_compress = 0;
 	extent_map_tree_init(&BTRFS_I(inode)->extent_tree, GFP_NOFS);
 	extent_io_tree_init(&BTRFS_I(inode)->io_tree,
 			     inode->i_mapping, GFP_NOFS);
@@ -3687,7 +3707,7 @@ static struct inode *btrfs_iget_locked(struct super_block *s,
  * Returns in *is_new if the inode was read from disk
  */
 struct inode *btrfs_iget(struct super_block *s, struct btrfs_key *location,
-			 struct btrfs_root *root)
+			 struct btrfs_root *root, int *new)
 {
 	struct inode *inode;
 
@@ -3702,6 +3722,8 @@ struct inode *btrfs_iget(struct super_block *s, struct btrfs_key *location,
 
 		inode_tree_add(inode);
 		unlock_new_inode(inode);
+		if (new)
+			*new = 1;
 	}
 
 	return inode;
@@ -3754,7 +3776,7 @@ struct inode *btrfs_lookup_dentry(struct inode *dir, struct dentry *dentry)
 		return NULL;
 
 	if (location.type == BTRFS_INODE_ITEM_KEY) {
-		inode = btrfs_iget(dir->i_sb, &location, root);
+		inode = btrfs_iget(dir->i_sb, &location, root, NULL);
 		return inode;
 	}
 
@@ -3769,7 +3791,7 @@ struct inode *btrfs_lookup_dentry(struct inode *dir, struct dentry *dentry)
 		else
 			inode = new_simple_dir(dir->i_sb, &location, sub_root);
 	} else {
-		inode = btrfs_iget(dir->i_sb, &location, sub_root);
+		inode = btrfs_iget(dir->i_sb, &location, sub_root, NULL);
 	}
 	srcu_read_unlock(&root->fs_info->subvol_srcu, index);
 
@@ -4501,7 +4523,7 @@ static int btrfs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
 	err = btrfs_find_free_objectid(trans, root, dir->i_ino, &objectid);
 	if (err) {
 		err = -ENOSPC;
-		goto out_unlock;
+		goto out_fail;
 	}
 
 	inode = btrfs_new_inode(trans, root, dir, dentry->d_name.name,
@@ -4979,6 +5001,7 @@ static void btrfs_invalidatepage(struct page *page, unsigned long offset)
 {
 	struct extent_io_tree *tree;
 	struct btrfs_ordered_extent *ordered;
+	struct extent_state *cached_state = NULL;
 	u64 page_start = page_offset(page);
 	u64 page_end = page_start + PAGE_CACHE_SIZE - 1;
 
@@ -4997,7 +5020,8 @@ static void btrfs_invalidatepage(struct page *page, unsigned long offset)
 		btrfs_releasepage(page, GFP_NOFS);
 		return;
 	}
-	lock_extent(tree, page_start, page_end, GFP_NOFS);
+	lock_extent_bits(tree, page_start, page_end, 0, &cached_state,
+			 GFP_NOFS);
 	ordered = btrfs_lookup_ordered_extent(page->mapping->host,
 					   page_offset(page));
 	if (ordered) {
@@ -5008,7 +5032,7 @@ static void btrfs_invalidatepage(struct page *page, unsigned long offset)
 		clear_extent_bit(tree, page_start, page_end,
 				 EXTENT_DIRTY | EXTENT_DELALLOC |
 				 EXTENT_LOCKED | EXTENT_DO_ACCOUNTING, 1, 0,
-				 NULL, GFP_NOFS);
+				 &cached_state, GFP_NOFS);
 		/*
 		 * whoever cleared the private bit is responsible
 		 * for the finish_ordered_io
@@ -5018,11 +5042,13 @@ static void btrfs_invalidatepage(struct page *page, unsigned long offset)
 						page_start, page_end);
 		}
 		btrfs_put_ordered_extent(ordered);
-		lock_extent(tree, page_start, page_end, GFP_NOFS);
+		cached_state = NULL;
+		lock_extent_bits(tree, page_start, page_end, 0, &cached_state,
+				 GFP_NOFS);
 	}
 	clear_extent_bit(tree, page_start, page_end,
 		 EXTENT_LOCKED | EXTENT_DIRTY | EXTENT_DELALLOC |
-		 EXTENT_DO_ACCOUNTING, 1, 1, NULL, GFP_NOFS);
+		 EXTENT_DO_ACCOUNTING, 1, 1, &cached_state, GFP_NOFS);
 	__btrfs_releasepage(page, GFP_NOFS);
 
 	ClearPageChecked(page);
@@ -5055,6 +5081,7 @@ int btrfs_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf)
 	struct btrfs_root *root = BTRFS_I(inode)->root;
 	struct extent_io_tree *io_tree = &BTRFS_I(inode)->io_tree;
 	struct btrfs_ordered_extent *ordered;
+	struct extent_state *cached_state = NULL;
 	char *kaddr;
 	unsigned long zero_start;
 	loff_t size;
@@ -5093,7 +5120,8 @@ again:
 	}
 	wait_on_page_writeback(page);
 
-	lock_extent(io_tree, page_start, page_end, GFP_NOFS);
+	lock_extent_bits(io_tree, page_start, page_end, 0, &cached_state,
+			 GFP_NOFS);
 	set_page_extent_mapped(page);
 
 	/*
@@ -5102,7 +5130,8 @@ again:
 	 */
 	ordered = btrfs_lookup_ordered_extent(inode, page_start);
 	if (ordered) {
-		unlock_extent(io_tree, page_start, page_end, GFP_NOFS);
+		unlock_extent_cached(io_tree, page_start, page_end,
+				     &cached_state, GFP_NOFS);
 		unlock_page(page);
 		btrfs_start_ordered_extent(inode, ordered, 1);
 		btrfs_put_ordered_extent(ordered);
@@ -5116,13 +5145,15 @@ again:
 	 * is probably a better way to do this, but for now keep consistent with
 	 * prepare_pages in the normal write path.
 	 */
-	clear_extent_bits(&BTRFS_I(inode)->io_tree, page_start, page_end,
+	clear_extent_bit(&BTRFS_I(inode)->io_tree, page_start, page_end,
 			  EXTENT_DIRTY | EXTENT_DELALLOC | EXTENT_DO_ACCOUNTING,
-			  GFP_NOFS);
+			  0, 0, &cached_state, GFP_NOFS);
 
-	ret = btrfs_set_extent_delalloc(inode, page_start, page_end);
+	ret = btrfs_set_extent_delalloc(inode, page_start, page_end,
+					&cached_state);
 	if (ret) {
-		unlock_extent(io_tree, page_start, page_end, GFP_NOFS);
+		unlock_extent_cached(io_tree, page_start, page_end,
+				     &cached_state, GFP_NOFS);
 		ret = VM_FAULT_SIGBUS;
 		btrfs_free_reserved_data_space(root, inode, PAGE_CACHE_SIZE);
 		goto out_unlock;
@@ -5148,7 +5179,7 @@ again:
 	BTRFS_I(inode)->last_trans = root->fs_info->generation;
 	BTRFS_I(inode)->last_sub_trans = BTRFS_I(inode)->root->log_transid;
 
-	unlock_extent(io_tree, page_start, page_end, GFP_NOFS);
+	unlock_extent_cached(io_tree, page_start, page_end, &cached_state, GFP_NOFS);
 
 out_unlock:
 	btrfs_unreserve_metadata_for_delalloc(root, inode, 1);
@@ -5827,6 +5858,7 @@ stop_trans:
 static long btrfs_fallocate(struct inode *inode, int mode,
 			    loff_t offset, loff_t len)
 {
+	struct extent_state *cached_state = NULL;
 	u64 cur_offset;
 	u64 last_byte;
 	u64 alloc_start;
@@ -5865,16 +5897,17 @@ static long btrfs_fallocate(struct inode *inode, int mode,
 		/* the extent lock is ordered inside the running
 		 * transaction
 		 */
-		lock_extent(&BTRFS_I(inode)->io_tree, alloc_start, locked_end,
-			    GFP_NOFS);
+		lock_extent_bits(&BTRFS_I(inode)->io_tree, alloc_start,
+				 locked_end, 0, &cached_state, GFP_NOFS);
 		ordered = btrfs_lookup_first_ordered_extent(inode,
 							    alloc_end - 1);
 		if (ordered &&
 		    ordered->file_offset + ordered->len > alloc_start &&
 		    ordered->file_offset < alloc_end) {
 			btrfs_put_ordered_extent(ordered);
-			unlock_extent(&BTRFS_I(inode)->io_tree,
-				      alloc_start, locked_end, GFP_NOFS);
+			unlock_extent_cached(&BTRFS_I(inode)->io_tree,
+					     alloc_start, locked_end,
+					     &cached_state, GFP_NOFS);
 			/*
 			 * we can't wait on the range with the transaction
 			 * running or with the extent lock held
@@ -5916,8 +5949,8 @@ static long btrfs_fallocate(struct inode *inode, int mode,
 			break;
 		}
 	}
-	unlock_extent(&BTRFS_I(inode)->io_tree, alloc_start, locked_end,
-		      GFP_NOFS);
+	unlock_extent_cached(&BTRFS_I(inode)->io_tree, alloc_start, locked_end,
+			     &cached_state, GFP_NOFS);
 
 	btrfs_free_reserved_data_space(BTRFS_I(inode)->root, inode,
 				       alloc_end - alloc_start);
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index 645a17927a8f..2845c6ceecd2 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -48,6 +48,7 @@
 #include "print-tree.h"
 #include "volumes.h"
 #include "locking.h"
+#include "ctree.h"
 
 /* Mask out flags that are inappropriate for the given type of inode. */
 static inline __u32 btrfs_mask_flags(umode_t mode, __u32 flags)
@@ -474,7 +475,79 @@ out_unlock:
 	return error;
 }
 
-static int btrfs_defrag_file(struct file *file)
+static int should_defrag_range(struct inode *inode, u64 start, u64 len,
+			       int thresh, u64 *last_len, u64 *skip,
+			       u64 *defrag_end)
+{
+	struct extent_io_tree *io_tree = &BTRFS_I(inode)->io_tree;
+	struct extent_map *em = NULL;
+	struct extent_map_tree *em_tree = &BTRFS_I(inode)->extent_tree;
+	int ret = 1;
+
+
+	if (thresh == 0)
+		thresh = 256 * 1024;
+
+	/*
+	 * make sure that once we start defragging and extent, we keep on
+	 * defragging it
+	 */
+	if (start < *defrag_end)
+		return 1;
+
+	*skip = 0;
+
+	/*
+	 * hopefully we have this extent in the tree already, try without
+	 * the full extent lock
+	 */
+	read_lock(&em_tree->lock);
+	em = lookup_extent_mapping(em_tree, start, len);
+	read_unlock(&em_tree->lock);
+
+	if (!em) {
+		/* get the big lock and read metadata off disk */
+		lock_extent(io_tree, start, start + len - 1, GFP_NOFS);
+		em = btrfs_get_extent(inode, NULL, 0, start, len, 0);
+		unlock_extent(io_tree, start, start + len - 1, GFP_NOFS);
+
+		if (!em)
+			return 0;
+	}
+
+	/* this will cover holes, and inline extents */
+	if (em->block_start >= EXTENT_MAP_LAST_BYTE)
+		ret = 0;
+
+	/*
+	 * we hit a real extent, if it is big don't bother defragging it again
+	 */
+	if ((*last_len == 0 || *last_len >= thresh) && em->len >= thresh)
+		ret = 0;
+
+	/*
+	 * last_len ends up being a counter of how many bytes we've defragged.
+	 * every time we choose not to defrag an extent, we reset *last_len
+	 * so that the next tiny extent will force a defrag.
+	 *
+	 * The end result of this is that tiny extents before a single big
+	 * extent will force at least part of that big extent to be defragged.
+	 */
+	if (ret) {
+		*last_len += len;
+		*defrag_end = extent_map_end(em);
+	} else {
+		*last_len = 0;
+		*skip = extent_map_end(em);
+		*defrag_end = 0;
+	}
+
+	free_extent_map(em);
+	return ret;
+}
+
+static int btrfs_defrag_file(struct file *file,
+			     struct btrfs_ioctl_defrag_range_args *range)
 {
 	struct inode *inode = fdentry(file)->d_inode;
 	struct btrfs_root *root = BTRFS_I(inode)->root;
@@ -486,37 +559,96 @@ static int btrfs_defrag_file(struct file *file)
 	unsigned long total_read = 0;
 	u64 page_start;
 	u64 page_end;
+	u64 last_len = 0;
+	u64 skip = 0;
+	u64 defrag_end = 0;
 	unsigned long i;
 	int ret;
 
-	ret = btrfs_check_data_free_space(root, inode, inode->i_size);
-	if (ret)
-		return -ENOSPC;
+	if (inode->i_size == 0)
+		return 0;
+
+	if (range->start + range->len > range->start) {
+		last_index = min_t(u64, inode->i_size - 1,
+			 range->start + range->len - 1) >> PAGE_CACHE_SHIFT;
+	} else {
+		last_index = (inode->i_size - 1) >> PAGE_CACHE_SHIFT;
+	}
+
+	i = range->start >> PAGE_CACHE_SHIFT;
+	while (i <= last_index) {
+		if (!should_defrag_range(inode, (u64)i << PAGE_CACHE_SHIFT,
+					PAGE_CACHE_SIZE,
+					range->extent_thresh,
+					&last_len, &skip,
+					&defrag_end)) {
+			unsigned long next;
+			/*
+			 * the should_defrag function tells us how much to skip
+			 * bump our counter by the suggested amount
+			 */
+			next = (skip + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
+			i = max(i + 1, next);
+			continue;
+		}
 
-	mutex_lock(&inode->i_mutex);
-	last_index = inode->i_size >> PAGE_CACHE_SHIFT;
-	for (i = 0; i <= last_index; i++) {
 		if (total_read % ra_pages == 0) {
 			btrfs_force_ra(inode->i_mapping, &file->f_ra, file, i,
 				       min(last_index, i + ra_pages - 1));
 		}
 		total_read++;
+		mutex_lock(&inode->i_mutex);
+		if (range->flags & BTRFS_DEFRAG_RANGE_COMPRESS)
+			BTRFS_I(inode)->force_compress = 1;
+
+		ret = btrfs_check_data_free_space(root, inode, PAGE_CACHE_SIZE);
+		if (ret) {
+			ret = -ENOSPC;
+			break;
+		}
+
+		ret = btrfs_reserve_metadata_for_delalloc(root, inode, 1);
+		if (ret) {
+			btrfs_free_reserved_data_space(root, inode,
+						       PAGE_CACHE_SIZE);
+			ret = -ENOSPC;
+			break;
+		}
 again:
+		if (inode->i_size == 0 ||
+		    i > ((inode->i_size - 1) >> PAGE_CACHE_SHIFT)) {
+			ret = 0;
+			goto err_reservations;
+		}
+
 		page = grab_cache_page(inode->i_mapping, i);
 		if (!page)
-			goto out_unlock;
+			goto err_reservations;
+
 		if (!PageUptodate(page)) {
 			btrfs_readpage(NULL, page);
 			lock_page(page);
 			if (!PageUptodate(page)) {
 				unlock_page(page);
 				page_cache_release(page);
-				goto out_unlock;
+				goto err_reservations;
 			}
 		}
 
+		if (page->mapping != inode->i_mapping) {
+			unlock_page(page);
+			page_cache_release(page);
+			goto again;
+		}
+
 		wait_on_page_writeback(page);
 
+		if (PageDirty(page)) {
+			btrfs_free_reserved_data_space(root, inode,
+						       PAGE_CACHE_SIZE);
+			goto loop_unlock;
+		}
+
 		page_start = (u64)page->index << PAGE_CACHE_SHIFT;
 		page_end = page_start + PAGE_CACHE_SIZE - 1;
 		lock_extent(io_tree, page_start, page_end, GFP_NOFS);
@@ -537,18 +669,54 @@ again:
 		 * page if it is dirtied again later
 		 */
 		clear_page_dirty_for_io(page);
+		clear_extent_bits(&BTRFS_I(inode)->io_tree, page_start,
+				  page_end, EXTENT_DIRTY | EXTENT_DELALLOC |
+				  EXTENT_DO_ACCOUNTING, GFP_NOFS);
 
-		btrfs_set_extent_delalloc(inode, page_start, page_end);
+		btrfs_set_extent_delalloc(inode, page_start, page_end, NULL);
+		ClearPageChecked(page);
 		set_page_dirty(page);
 		unlock_extent(io_tree, page_start, page_end, GFP_NOFS);
+
+loop_unlock:
 		unlock_page(page);
 		page_cache_release(page);
+		mutex_unlock(&inode->i_mutex);
+
+		btrfs_unreserve_metadata_for_delalloc(root, inode, 1);
 		balance_dirty_pages_ratelimited_nr(inode->i_mapping, 1);
+		i++;
+	}
+
+	if ((range->flags & BTRFS_DEFRAG_RANGE_START_IO))
+		filemap_flush(inode->i_mapping);
+
+	if ((range->flags & BTRFS_DEFRAG_RANGE_COMPRESS)) {
+		/* the filemap_flush will queue IO into the worker threads, but
+		 * we have to make sure the IO is actually started and that
+		 * ordered extents get created before we return
+		 */
+		atomic_inc(&root->fs_info->async_submit_draining);
+		while (atomic_read(&root->fs_info->nr_async_submits) ||
+		      atomic_read(&root->fs_info->async_delalloc_pages)) {
+			wait_event(root->fs_info->async_submit_wait,
+			   (atomic_read(&root->fs_info->nr_async_submits) == 0 &&
+			    atomic_read(&root->fs_info->async_delalloc_pages) == 0));
+		}
+		atomic_dec(&root->fs_info->async_submit_draining);
+
+		mutex_lock(&inode->i_mutex);
+		BTRFS_I(inode)->force_compress = 0;
+		mutex_unlock(&inode->i_mutex);
 	}
 
-out_unlock:
-	mutex_unlock(&inode->i_mutex);
 	return 0;
+
+err_reservations:
+	mutex_unlock(&inode->i_mutex);
+	btrfs_free_reserved_data_space(root, inode, PAGE_CACHE_SIZE);
+	btrfs_unreserve_metadata_for_delalloc(root, inode, 1);
+	return ret;
 }
 
 static noinline int btrfs_ioctl_resize(struct btrfs_root *root,
@@ -608,7 +776,7 @@ static noinline int btrfs_ioctl_resize(struct btrfs_root *root,
 			mod = 1;
 			sizestr++;
 		}
-		new_size = btrfs_parse_size(sizestr);
+		new_size = memparse(sizestr, NULL);
 		if (new_size == 0) {
 			ret = -EINVAL;
 			goto out_unlock;
@@ -743,6 +911,327 @@ out:
 	return ret;
 }
 
+static noinline int key_in_sk(struct btrfs_key *key,
+			      struct btrfs_ioctl_search_key *sk)
+{
+	struct btrfs_key test;
+	int ret;
+
+	test.objectid = sk->min_objectid;
+	test.type = sk->min_type;
+	test.offset = sk->min_offset;
+
+	ret = btrfs_comp_cpu_keys(key, &test);
+	if (ret < 0)
+		return 0;
+
+	test.objectid = sk->max_objectid;
+	test.type = sk->max_type;
+	test.offset = sk->max_offset;
+
+	ret = btrfs_comp_cpu_keys(key, &test);
+	if (ret > 0)
+		return 0;
+	return 1;
+}
+
+static noinline int copy_to_sk(struct btrfs_root *root,
+			       struct btrfs_path *path,
+			       struct btrfs_key *key,
+			       struct btrfs_ioctl_search_key *sk,
+			       char *buf,
+			       unsigned long *sk_offset,
+			       int *num_found)
+{
+	u64 found_transid;
+	struct extent_buffer *leaf;
+	struct btrfs_ioctl_search_header sh;
+	unsigned long item_off;
+	unsigned long item_len;
+	int nritems;
+	int i;
+	int slot;
+	int found = 0;
+	int ret = 0;
+
+	leaf = path->nodes[0];
+	slot = path->slots[0];
+	nritems = btrfs_header_nritems(leaf);
+
+	if (btrfs_header_generation(leaf) > sk->max_transid) {
+		i = nritems;
+		goto advance_key;
+	}
+	found_transid = btrfs_header_generation(leaf);
+
+	for (i = slot; i < nritems; i++) {
+		item_off = btrfs_item_ptr_offset(leaf, i);
+		item_len = btrfs_item_size_nr(leaf, i);
+
+		if (item_len > BTRFS_SEARCH_ARGS_BUFSIZE)
+			item_len = 0;
+
+		if (sizeof(sh) + item_len + *sk_offset >
+		    BTRFS_SEARCH_ARGS_BUFSIZE) {
+			ret = 1;
+			goto overflow;
+		}
+
+		btrfs_item_key_to_cpu(leaf, key, i);
+		if (!key_in_sk(key, sk))
+			continue;
+
+		sh.objectid = key->objectid;
+		sh.offset = key->offset;
+		sh.type = key->type;
+		sh.len = item_len;
+		sh.transid = found_transid;
+
+		/* copy search result header */
+		memcpy(buf + *sk_offset, &sh, sizeof(sh));
+		*sk_offset += sizeof(sh);
+
+		if (item_len) {
+			char *p = buf + *sk_offset;
+			/* copy the item */
+			read_extent_buffer(leaf, p,
+					   item_off, item_len);
+			*sk_offset += item_len;
+		}
+		found++;
+
+		if (*num_found >= sk->nr_items)
+			break;
+	}
+advance_key:
+	ret = 0;
+	if (key->offset < (u64)-1 && key->offset < sk->max_offset)
+		key->offset++;
+	else if (key->type < (u8)-1 && key->type < sk->max_type) {
+		key->offset = 0;
+		key->type++;
+	} else if (key->objectid < (u64)-1 && key->objectid < sk->max_objectid) {
+		key->offset = 0;
+		key->type = 0;
+		key->objectid++;
+	} else
+		ret = 1;
+overflow:
+	*num_found += found;
+	return ret;
+}
+
+static noinline int search_ioctl(struct inode *inode,
+				 struct btrfs_ioctl_search_args *args)
+{
+	struct btrfs_root *root;
+	struct btrfs_key key;
+	struct btrfs_key max_key;
+	struct btrfs_path *path;
+	struct btrfs_ioctl_search_key *sk = &args->key;
+	struct btrfs_fs_info *info = BTRFS_I(inode)->root->fs_info;
+	int ret;
+	int num_found = 0;
+	unsigned long sk_offset = 0;
+
+	path = btrfs_alloc_path();
+	if (!path)
+		return -ENOMEM;
+
+	if (sk->tree_id == 0) {
+		/* search the root of the inode that was passed */
+		root = BTRFS_I(inode)->root;
+	} else {
+		key.objectid = sk->tree_id;
+		key.type = BTRFS_ROOT_ITEM_KEY;
+		key.offset = (u64)-1;
+		root = btrfs_read_fs_root_no_name(info, &key);
+		if (IS_ERR(root)) {
+			printk(KERN_ERR "could not find root %llu\n",
+			       sk->tree_id);
+			btrfs_free_path(path);
+			return -ENOENT;
+		}
+	}
+
+	key.objectid = sk->min_objectid;
+	key.type = sk->min_type;
+	key.offset = sk->min_offset;
+
+	max_key.objectid = sk->max_objectid;
+	max_key.type = sk->max_type;
+	max_key.offset = sk->max_offset;
+
+	path->keep_locks = 1;
+
+	while(1) {
+		ret = btrfs_search_forward(root, &key, &max_key, path, 0,
+					   sk->min_transid);
+		if (ret != 0) {
+			if (ret > 0)
+				ret = 0;
+			goto err;
+		}
+		ret = copy_to_sk(root, path, &key, sk, args->buf,
+				 &sk_offset, &num_found);
+		btrfs_release_path(root, path);
+		if (ret || num_found >= sk->nr_items)
+			break;
+
+	}
+	ret = 0;
+err:
+	sk->nr_items = num_found;
+	btrfs_free_path(path);
+	return ret;
+}
+
+static noinline int btrfs_ioctl_tree_search(struct file *file,
+					   void __user *argp)
+{
+	 struct btrfs_ioctl_search_args *args;
+	 struct inode *inode;
+	 int ret;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
+	args = kmalloc(sizeof(*args), GFP_KERNEL);
+	if (!args)
+		return -ENOMEM;
+
+	if (copy_from_user(args, argp, sizeof(*args))) {
+		kfree(args);
+		return -EFAULT;
+	}
+	inode = fdentry(file)->d_inode;
+	ret = search_ioctl(inode, args);
+	if (ret == 0 && copy_to_user(argp, args, sizeof(*args)))
+		ret = -EFAULT;
+	kfree(args);
+	return ret;
+}
+
+/*
+ * Search INODE_REFs to identify path name of 'dirid' directory
+ * in a 'tree_id' tree. and sets path name to 'name'.
+ */
+static noinline int btrfs_search_path_in_tree(struct btrfs_fs_info *info,
+				u64 tree_id, u64 dirid, char *name)
+{
+	struct btrfs_root *root;
+	struct btrfs_key key;
+	char *ptr;
+	int ret = -1;
+	int slot;
+	int len;
+	int total_len = 0;
+	struct btrfs_inode_ref *iref;
+	struct extent_buffer *l;
+	struct btrfs_path *path;
+
+	if (dirid == BTRFS_FIRST_FREE_OBJECTID) {
+		name[0]='\0';
+		return 0;
+	}
+
+	path = btrfs_alloc_path();
+	if (!path)
+		return -ENOMEM;
+
+	ptr = &name[BTRFS_INO_LOOKUP_PATH_MAX];
+
+	key.objectid = tree_id;
+	key.type = BTRFS_ROOT_ITEM_KEY;
+	key.offset = (u64)-1;
+	root = btrfs_read_fs_root_no_name(info, &key);
+	if (IS_ERR(root)) {
+		printk(KERN_ERR "could not find root %llu\n", tree_id);
+		ret = -ENOENT;
+		goto out;
+	}
+
+	key.objectid = dirid;
+	key.type = BTRFS_INODE_REF_KEY;
+	key.offset = (u64)-1;
+
+	while(1) {
+		ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
+		if (ret < 0)
+			goto out;
+
+		l = path->nodes[0];
+		slot = path->slots[0];
+		if (ret > 0 && slot > 0)
+			slot--;
+		btrfs_item_key_to_cpu(l, &key, slot);
+
+		if (ret > 0 && (key.objectid != dirid ||
+				key.type != BTRFS_INODE_REF_KEY)) {
+			ret = -ENOENT;
+			goto out;
+		}
+
+		iref = btrfs_item_ptr(l, slot, struct btrfs_inode_ref);
+		len = btrfs_inode_ref_name_len(l, iref);
+		ptr -= len + 1;
+		total_len += len + 1;
+		if (ptr < name)
+			goto out;
+
+		*(ptr + len) = '/';
+		read_extent_buffer(l, ptr,(unsigned long)(iref + 1), len);
+
+		if (key.offset == BTRFS_FIRST_FREE_OBJECTID)
+			break;
+
+		btrfs_release_path(root, path);
+		key.objectid = key.offset;
+		key.offset = (u64)-1;
+		dirid = key.objectid;
+
+	}
+	if (ptr < name)
+		goto out;
+	memcpy(name, ptr, total_len);
+	name[total_len]='\0';
+	ret = 0;
+out:
+	btrfs_free_path(path);
+	return ret;
+}
+
+static noinline int btrfs_ioctl_ino_lookup(struct file *file,
+					   void __user *argp)
+{
+	 struct btrfs_ioctl_ino_lookup_args *args;
+	 struct inode *inode;
+	 int ret;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
+	args = kmalloc(sizeof(*args), GFP_KERNEL);
+	if (copy_from_user(args, argp, sizeof(*args))) {
+		kfree(args);
+		return -EFAULT;
+	}
+	inode = fdentry(file)->d_inode;
+
+	if (args->treeid == 0)
+		args->treeid = BTRFS_I(inode)->root->root_key.objectid;
+
+	ret = btrfs_search_path_in_tree(BTRFS_I(inode)->root->fs_info,
+					args->treeid, args->objectid,
+					args->name);
+
+	if (ret == 0 && copy_to_user(argp, args, sizeof(*args)))
+		ret = -EFAULT;
+
+	kfree(args);
+	return ret;
+}
+
 static noinline int btrfs_ioctl_snap_destroy(struct file *file,
 					     void __user *arg)
 {
@@ -849,10 +1338,11 @@ out:
 	return err;
 }
 
-static int btrfs_ioctl_defrag(struct file *file)
+static int btrfs_ioctl_defrag(struct file *file, void __user *argp)
 {
 	struct inode *inode = fdentry(file)->d_inode;
 	struct btrfs_root *root = BTRFS_I(inode)->root;
+	struct btrfs_ioctl_defrag_range_args *range;
 	int ret;
 
 	ret = mnt_want_write(file->f_path.mnt);
@@ -873,7 +1363,30 @@ static int btrfs_ioctl_defrag(struct file *file)
 			ret = -EINVAL;
 			goto out;
 		}
-		btrfs_defrag_file(file);
+
+		range = kzalloc(sizeof(*range), GFP_KERNEL);
+		if (!range) {
+			ret = -ENOMEM;
+			goto out;
+		}
+
+		if (argp) {
+			if (copy_from_user(range, argp,
+					   sizeof(*range))) {
+				ret = -EFAULT;
+				kfree(range);
+			}
+			/* compression requires us to start the IO */
+			if ((range->flags & BTRFS_DEFRAG_RANGE_COMPRESS)) {
+				range->flags |= BTRFS_DEFRAG_RANGE_START_IO;
+				range->extent_thresh = (u32)-1;
+			}
+		} else {
+			/* the rest are all set to zero by kzalloc */
+			range->len = (u64)-1;
+		}
+		btrfs_defrag_file(file, range);
+		kfree(range);
 		break;
 	}
 out:
@@ -1274,6 +1787,157 @@ out:
 	return ret;
 }
 
+static long btrfs_ioctl_default_subvol(struct file *file, void __user *argp)
+{
+	struct inode *inode = fdentry(file)->d_inode;
+	struct btrfs_root *root = BTRFS_I(inode)->root;
+	struct btrfs_root *new_root;
+	struct btrfs_dir_item *di;
+	struct btrfs_trans_handle *trans;
+	struct btrfs_path *path;
+	struct btrfs_key location;
+	struct btrfs_disk_key disk_key;
+	struct btrfs_super_block *disk_super;
+	u64 features;
+	u64 objectid = 0;
+	u64 dir_id;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
+	if (copy_from_user(&objectid, argp, sizeof(objectid)))
+		return -EFAULT;
+
+	if (!objectid)
+		objectid = root->root_key.objectid;
+
+	location.objectid = objectid;
+	location.type = BTRFS_ROOT_ITEM_KEY;
+	location.offset = (u64)-1;
+
+	new_root = btrfs_read_fs_root_no_name(root->fs_info, &location);
+	if (IS_ERR(new_root))
+		return PTR_ERR(new_root);
+
+	if (btrfs_root_refs(&new_root->root_item) == 0)
+		return -ENOENT;
+
+	path = btrfs_alloc_path();
+	if (!path)
+		return -ENOMEM;
+	path->leave_spinning = 1;
+
+	trans = btrfs_start_transaction(root, 1);
+	if (!trans) {
+		btrfs_free_path(path);
+		return -ENOMEM;
+	}
+
+	dir_id = btrfs_super_root_dir(&root->fs_info->super_copy);
+	di = btrfs_lookup_dir_item(trans, root->fs_info->tree_root, path,
+				   dir_id, "default", 7, 1);
+	if (!di) {
+		btrfs_free_path(path);
+		btrfs_end_transaction(trans, root);
+		printk(KERN_ERR "Umm, you don't have the default dir item, "
+		       "this isn't going to work\n");
+		return -ENOENT;
+	}
+
+	btrfs_cpu_key_to_disk(&disk_key, &new_root->root_key);
+	btrfs_set_dir_item_key(path->nodes[0], di, &disk_key);
+	btrfs_mark_buffer_dirty(path->nodes[0]);
+	btrfs_free_path(path);
+
+	disk_super = &root->fs_info->super_copy;
+	features = btrfs_super_incompat_flags(disk_super);
+	if (!(features & BTRFS_FEATURE_INCOMPAT_DEFAULT_SUBVOL)) {
+		features |= BTRFS_FEATURE_INCOMPAT_DEFAULT_SUBVOL;
+		btrfs_set_super_incompat_flags(disk_super, features);
+	}
+	btrfs_end_transaction(trans, root);
+
+	return 0;
+}
+
+long btrfs_ioctl_space_info(struct btrfs_root *root, void __user *arg)
+{
+	struct btrfs_ioctl_space_args space_args;
+	struct btrfs_ioctl_space_info space;
+	struct btrfs_ioctl_space_info *dest;
+	struct btrfs_ioctl_space_info *dest_orig;
+	struct btrfs_ioctl_space_info *user_dest;
+	struct btrfs_space_info *info;
+	int alloc_size;
+	int ret = 0;
+	int slot_count = 0;
+
+	if (copy_from_user(&space_args,
+			   (struct btrfs_ioctl_space_args __user *)arg,
+			   sizeof(space_args)))
+		return -EFAULT;
+
+	/* first we count slots */
+	rcu_read_lock();
+	list_for_each_entry_rcu(info, &root->fs_info->space_info, list)
+		slot_count++;
+	rcu_read_unlock();
+
+	/* space_slots == 0 means they are asking for a count */
+	if (space_args.space_slots == 0) {
+		space_args.total_spaces = slot_count;
+		goto out;
+	}
+	alloc_size = sizeof(*dest) * slot_count;
+	/* we generally have at most 6 or so space infos, one for each raid
+	 * level.  So, a whole page should be more than enough for everyone
+	 */
+	if (alloc_size > PAGE_CACHE_SIZE)
+		return -ENOMEM;
+
+	space_args.total_spaces = 0;
+	dest = kmalloc(alloc_size, GFP_NOFS);
+	if (!dest)
+		return -ENOMEM;
+	dest_orig = dest;
+
+	/* now we have a buffer to copy into */
+	rcu_read_lock();
+	list_for_each_entry_rcu(info, &root->fs_info->space_info, list) {
+		/* make sure we don't copy more than we allocated
+		 * in our buffer
+		 */
+		if (slot_count == 0)
+			break;
+		slot_count--;
+
+		/* make sure userland has enough room in their buffer */
+		if (space_args.total_spaces >= space_args.space_slots)
+			break;
+
+		space.flags = info->flags;
+		space.total_bytes = info->total_bytes;
+		space.used_bytes = info->bytes_used;
+		memcpy(dest, &space, sizeof(space));
+		dest++;
+		space_args.total_spaces++;
+	}
+	rcu_read_unlock();
+
+	user_dest = (struct btrfs_ioctl_space_info *)
+		(arg + sizeof(struct btrfs_ioctl_space_args));
+
+	if (copy_to_user(user_dest, dest_orig, alloc_size))
+		ret = -EFAULT;
+
+	kfree(dest_orig);
+out:
+	if (ret == 0 && copy_to_user(arg, &space_args, sizeof(space_args)))
+		ret = -EFAULT;
+
+	return ret;
+}
+
 /*
  * there are many ways the trans_start and trans_end ioctls can lead
  * to deadlocks.  They should only be used by applications that
@@ -1320,8 +1984,12 @@ long btrfs_ioctl(struct file *file, unsigned int
 		return btrfs_ioctl_snap_create(file, argp, 1);
 	case BTRFS_IOC_SNAP_DESTROY:
 		return btrfs_ioctl_snap_destroy(file, argp);
+	case BTRFS_IOC_DEFAULT_SUBVOL:
+		return btrfs_ioctl_default_subvol(file, argp);
 	case BTRFS_IOC_DEFRAG:
-		return btrfs_ioctl_defrag(file);
+		return btrfs_ioctl_defrag(file, NULL);
+	case BTRFS_IOC_DEFRAG_RANGE:
+		return btrfs_ioctl_defrag(file, argp);
 	case BTRFS_IOC_RESIZE:
 		return btrfs_ioctl_resize(root, argp);
 	case BTRFS_IOC_ADD_DEV:
@@ -1338,6 +2006,12 @@ long btrfs_ioctl(struct file *file, unsigned int
 		return btrfs_ioctl_trans_start(file);
 	case BTRFS_IOC_TRANS_END:
 		return btrfs_ioctl_trans_end(file);
+	case BTRFS_IOC_TREE_SEARCH:
+		return btrfs_ioctl_tree_search(file, argp);
+	case BTRFS_IOC_INO_LOOKUP:
+		return btrfs_ioctl_ino_lookup(file, argp);
+	case BTRFS_IOC_SPACE_INFO:
+		return btrfs_ioctl_space_info(root, argp);
 	case BTRFS_IOC_SYNC:
 		btrfs_sync_fs(file->f_dentry->d_sb, 1);
 		return 0;
diff --git a/fs/btrfs/ioctl.h b/fs/btrfs/ioctl.h
index bc49914475eb..424694aa517f 100644
--- a/fs/btrfs/ioctl.h
+++ b/fs/btrfs/ioctl.h
@@ -30,12 +30,114 @@ struct btrfs_ioctl_vol_args {
 	char name[BTRFS_PATH_NAME_MAX + 1];
 };
 
+#define BTRFS_INO_LOOKUP_PATH_MAX 4080
+struct btrfs_ioctl_ino_lookup_args {
+	__u64 treeid;
+	__u64 objectid;
+	char name[BTRFS_INO_LOOKUP_PATH_MAX];
+};
+
+struct btrfs_ioctl_search_key {
+	/* which root are we searching.  0 is the tree of tree roots */
+	__u64 tree_id;
+
+	/* keys returned will be >= min and <= max */
+	__u64 min_objectid;
+	__u64 max_objectid;
+
+	/* keys returned will be >= min and <= max */
+	__u64 min_offset;
+	__u64 max_offset;
+
+	/* max and min transids to search for */
+	__u64 min_transid;
+	__u64 max_transid;
+
+	/* keys returned will be >= min and <= max */
+	__u32 min_type;
+	__u32 max_type;
+
+	/*
+	 * how many items did userland ask for, and how many are we
+	 * returning
+	 */
+	__u32 nr_items;
+
+	/* align to 64 bits */
+	__u32 unused;
+
+	/* some extra for later */
+	__u64 unused1;
+	__u64 unused2;
+	__u64 unused3;
+	__u64 unused4;
+};
+
+struct btrfs_ioctl_search_header {
+	__u64 transid;
+	__u64 objectid;
+	__u64 offset;
+	__u32 type;
+	__u32 len;
+};
+
+#define BTRFS_SEARCH_ARGS_BUFSIZE (4096 - sizeof(struct btrfs_ioctl_search_key))
+/*
+ * the buf is an array of search headers where
+ * each header is followed by the actual item
+ * the type field is expanded to 32 bits for alignment
+ */
+struct btrfs_ioctl_search_args {
+	struct btrfs_ioctl_search_key key;
+	char buf[BTRFS_SEARCH_ARGS_BUFSIZE];
+};
+
 struct btrfs_ioctl_clone_range_args {
   __s64 src_fd;
   __u64 src_offset, src_length;
   __u64 dest_offset;
 };
 
+/* flags for the defrag range ioctl */
+#define BTRFS_DEFRAG_RANGE_COMPRESS 1
+#define BTRFS_DEFRAG_RANGE_START_IO 2
+
+struct btrfs_ioctl_defrag_range_args {
+	/* start of the defrag operation */
+	__u64 start;
+
+	/* number of bytes to defrag, use (u64)-1 to say all */
+	__u64 len;
+
+	/*
+	 * flags for the operation, which can include turning
+	 * on compression for this one defrag
+	 */
+	__u64 flags;
+
+	/*
+	 * any extent bigger than this will be considered
+	 * already defragged.  Use 0 to take the kernel default
+	 * Use 1 to say every single extent must be rewritten
+	 */
+	__u32 extent_thresh;
+
+	/* spare for later */
+	__u32 unused[5];
+};
+
+struct btrfs_ioctl_space_info {
+	__u64 flags;
+	__u64 total_bytes;
+	__u64 used_bytes;
+};
+
+struct btrfs_ioctl_space_args {
+	__u64 space_slots;
+	__u64 total_spaces;
+	struct btrfs_ioctl_space_info spaces[0];
+};
+
 #define BTRFS_IOC_SNAP_CREATE _IOW(BTRFS_IOCTL_MAGIC, 1, \
 				   struct btrfs_ioctl_vol_args)
 #define BTRFS_IOC_DEFRAG _IOW(BTRFS_IOCTL_MAGIC, 2, \
@@ -67,4 +169,13 @@ struct btrfs_ioctl_clone_range_args {
 				   struct btrfs_ioctl_vol_args)
 #define BTRFS_IOC_SNAP_DESTROY _IOW(BTRFS_IOCTL_MAGIC, 15, \
 				struct btrfs_ioctl_vol_args)
+#define BTRFS_IOC_DEFRAG_RANGE _IOW(BTRFS_IOCTL_MAGIC, 16, \
+				struct btrfs_ioctl_defrag_range_args)
+#define BTRFS_IOC_TREE_SEARCH _IOWR(BTRFS_IOCTL_MAGIC, 17, \
+				   struct btrfs_ioctl_search_args)
+#define BTRFS_IOC_INO_LOOKUP _IOWR(BTRFS_IOCTL_MAGIC, 18, \
+				   struct btrfs_ioctl_ino_lookup_args)
+#define BTRFS_IOC_DEFAULT_SUBVOL _IOW(BTRFS_IOCTL_MAGIC, 19, u64)
+#define BTRFS_IOC_SPACE_INFO _IOWR(BTRFS_IOCTL_MAGIC, 20, \
+				    struct btrfs_ioctl_space_args)
 #endif
diff --git a/fs/btrfs/ordered-data.c b/fs/btrfs/ordered-data.c
index 5c2a9e78a949..a8ffecd0b491 100644
--- a/fs/btrfs/ordered-data.c
+++ b/fs/btrfs/ordered-data.c
@@ -174,7 +174,6 @@ int btrfs_add_ordered_extent(struct inode *inode, u64 file_offset,
 	if (!entry)
 		return -ENOMEM;
 
-	mutex_lock(&tree->mutex);
 	entry->file_offset = file_offset;
 	entry->start = start;
 	entry->len = len;
@@ -190,16 +189,17 @@ int btrfs_add_ordered_extent(struct inode *inode, u64 file_offset,
 	INIT_LIST_HEAD(&entry->list);
 	INIT_LIST_HEAD(&entry->root_extent_list);
 
+	spin_lock(&tree->lock);
 	node = tree_insert(&tree->tree, file_offset,
 			   &entry->rb_node);
 	BUG_ON(node);
+	spin_unlock(&tree->lock);
 
 	spin_lock(&BTRFS_I(inode)->root->fs_info->ordered_extent_lock);
 	list_add_tail(&entry->root_extent_list,
 		      &BTRFS_I(inode)->root->fs_info->ordered_extents);
 	spin_unlock(&BTRFS_I(inode)->root->fs_info->ordered_extent_lock);
 
-	mutex_unlock(&tree->mutex);
 	BUG_ON(node);
 	return 0;
 }
@@ -216,9 +216,9 @@ int btrfs_add_ordered_sum(struct inode *inode,
 	struct btrfs_ordered_inode_tree *tree;
 
 	tree = &BTRFS_I(inode)->ordered_tree;
-	mutex_lock(&tree->mutex);
+	spin_lock(&tree->lock);
 	list_add_tail(&sum->list, &entry->list);
-	mutex_unlock(&tree->mutex);
+	spin_unlock(&tree->lock);
 	return 0;
 }
 
@@ -232,15 +232,16 @@ int btrfs_add_ordered_sum(struct inode *inode,
  * to make sure this function only returns 1 once for a given ordered extent.
  */
 int btrfs_dec_test_ordered_pending(struct inode *inode,
+				   struct btrfs_ordered_extent **cached,
 				   u64 file_offset, u64 io_size)
 {
 	struct btrfs_ordered_inode_tree *tree;
 	struct rb_node *node;
-	struct btrfs_ordered_extent *entry;
+	struct btrfs_ordered_extent *entry = NULL;
 	int ret;
 
 	tree = &BTRFS_I(inode)->ordered_tree;
-	mutex_lock(&tree->mutex);
+	spin_lock(&tree->lock);
 	node = tree_search(tree, file_offset);
 	if (!node) {
 		ret = 1;
@@ -264,7 +265,11 @@ int btrfs_dec_test_ordered_pending(struct inode *inode,
 	else
 		ret = 1;
 out:
-	mutex_unlock(&tree->mutex);
+	if (!ret && cached && entry) {
+		*cached = entry;
+		atomic_inc(&entry->refs);
+	}
+	spin_unlock(&tree->lock);
 	return ret == 0;
 }
 
@@ -291,7 +296,7 @@ int btrfs_put_ordered_extent(struct btrfs_ordered_extent *entry)
 
 /*
  * remove an ordered extent from the tree.  No references are dropped
- * and you must wake_up entry->wait.  You must hold the tree mutex
+ * and you must wake_up entry->wait.  You must hold the tree lock
  * while you call this function.
  */
 static int __btrfs_remove_ordered_extent(struct inode *inode,
@@ -340,9 +345,9 @@ int btrfs_remove_ordered_extent(struct inode *inode,
 	int ret;
 
 	tree = &BTRFS_I(inode)->ordered_tree;
-	mutex_lock(&tree->mutex);
+	spin_lock(&tree->lock);
 	ret = __btrfs_remove_ordered_extent(inode, entry);
-	mutex_unlock(&tree->mutex);
+	spin_unlock(&tree->lock);
 	wake_up(&entry->wait);
 
 	return ret;
@@ -567,7 +572,7 @@ struct btrfs_ordered_extent *btrfs_lookup_ordered_extent(struct inode *inode,
 	struct btrfs_ordered_extent *entry = NULL;
 
 	tree = &BTRFS_I(inode)->ordered_tree;
-	mutex_lock(&tree->mutex);
+	spin_lock(&tree->lock);
 	node = tree_search(tree, file_offset);
 	if (!node)
 		goto out;
@@ -578,7 +583,7 @@ struct btrfs_ordered_extent *btrfs_lookup_ordered_extent(struct inode *inode,
 	if (entry)
 		atomic_inc(&entry->refs);
 out:
-	mutex_unlock(&tree->mutex);
+	spin_unlock(&tree->lock);
 	return entry;
 }
 
@@ -594,7 +599,7 @@ btrfs_lookup_first_ordered_extent(struct inode *inode, u64 file_offset)
 	struct btrfs_ordered_extent *entry = NULL;
 
 	tree = &BTRFS_I(inode)->ordered_tree;
-	mutex_lock(&tree->mutex);
+	spin_lock(&tree->lock);
 	node = tree_search(tree, file_offset);
 	if (!node)
 		goto out;
@@ -602,7 +607,7 @@ btrfs_lookup_first_ordered_extent(struct inode *inode, u64 file_offset)
 	entry = rb_entry(node, struct btrfs_ordered_extent, rb_node);
 	atomic_inc(&entry->refs);
 out:
-	mutex_unlock(&tree->mutex);
+	spin_unlock(&tree->lock);
 	return entry;
 }
 
@@ -629,7 +634,7 @@ int btrfs_ordered_update_i_size(struct inode *inode, u64 offset,
 	else
 		offset = ALIGN(offset, BTRFS_I(inode)->root->sectorsize);
 
-	mutex_lock(&tree->mutex);
+	spin_lock(&tree->lock);
 	disk_i_size = BTRFS_I(inode)->disk_i_size;
 
 	/* truncate file */
@@ -735,7 +740,7 @@ out:
 	 */
 	if (ordered)
 		__btrfs_remove_ordered_extent(inode, ordered);
-	mutex_unlock(&tree->mutex);
+	spin_unlock(&tree->lock);
 	if (ordered)
 		wake_up(&ordered->wait);
 	return ret;
@@ -762,7 +767,7 @@ int btrfs_find_ordered_sum(struct inode *inode, u64 offset, u64 disk_bytenr,
 	if (!ordered)
 		return 1;
 
-	mutex_lock(&tree->mutex);
+	spin_lock(&tree->lock);
 	list_for_each_entry_reverse(ordered_sum, &ordered->list, list) {
 		if (disk_bytenr >= ordered_sum->bytenr) {
 			num_sectors = ordered_sum->len / sectorsize;
@@ -777,7 +782,7 @@ int btrfs_find_ordered_sum(struct inode *inode, u64 offset, u64 disk_bytenr,
 		}
 	}
 out:
-	mutex_unlock(&tree->mutex);
+	spin_unlock(&tree->lock);
 	btrfs_put_ordered_extent(ordered);
 	return ret;
 }
diff --git a/fs/btrfs/ordered-data.h b/fs/btrfs/ordered-data.h
index 1fe1282ef47c..c82f76a9f040 100644
--- a/fs/btrfs/ordered-data.h
+++ b/fs/btrfs/ordered-data.h
@@ -21,7 +21,7 @@
 
 /* one of these per inode */
 struct btrfs_ordered_inode_tree {
-	struct mutex mutex;
+	spinlock_t lock;
 	struct rb_root tree;
 	struct rb_node *last;
 };
@@ -128,8 +128,8 @@ static inline int btrfs_ordered_sum_size(struct btrfs_root *root,
 static inline void
 btrfs_ordered_inode_tree_init(struct btrfs_ordered_inode_tree *t)
 {
-	mutex_init(&t->mutex);
-	t->tree.rb_node = NULL;
+	spin_lock_init(&t->lock);
+	t->tree = RB_ROOT;
 	t->last = NULL;
 }
 
@@ -137,7 +137,8 @@ int btrfs_put_ordered_extent(struct btrfs_ordered_extent *entry);
 int btrfs_remove_ordered_extent(struct inode *inode,
 				struct btrfs_ordered_extent *entry);
 int btrfs_dec_test_ordered_pending(struct inode *inode,
-				       u64 file_offset, u64 io_size);
+				   struct btrfs_ordered_extent **cached,
+				   u64 file_offset, u64 io_size);
 int btrfs_add_ordered_extent(struct inode *inode, u64 file_offset,
 			     u64 start, u64 len, u64 disk_len, int tyep);
 int btrfs_add_ordered_sum(struct inode *inode,
diff --git a/fs/btrfs/ref-cache.h b/fs/btrfs/ref-cache.h
index bc283ad2db73..e2a55cb2072b 100644
--- a/fs/btrfs/ref-cache.h
+++ b/fs/btrfs/ref-cache.h
@@ -52,7 +52,7 @@ static inline size_t btrfs_leaf_ref_size(int nr_extents)
 
 static inline void btrfs_leaf_ref_tree_init(struct btrfs_leaf_ref_tree *tree)
 {
-	tree->root.rb_node = NULL;
+	tree->root = RB_ROOT;
 	INIT_LIST_HEAD(&tree->list);
 	spin_lock_init(&tree->lock);
 }
diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c
index ab7ab5318745..0b23942cbc0d 100644
--- a/fs/btrfs/relocation.c
+++ b/fs/btrfs/relocation.c
@@ -170,14 +170,14 @@ struct async_merge {
 
 static void mapping_tree_init(struct mapping_tree *tree)
 {
-	tree->rb_root.rb_node = NULL;
+	tree->rb_root = RB_ROOT;
 	spin_lock_init(&tree->lock);
 }
 
 static void backref_cache_init(struct backref_cache *cache)
 {
 	int i;
-	cache->rb_root.rb_node = NULL;
+	cache->rb_root = RB_ROOT;
 	for (i = 0; i < BTRFS_MAX_LEVEL; i++)
 		INIT_LIST_HEAD(&cache->pending[i]);
 	spin_lock_init(&cache->lock);
@@ -2659,7 +2659,7 @@ static int relocate_file_extent_cluster(struct inode *inode,
 					EXTENT_BOUNDARY, GFP_NOFS);
 			nr++;
 		}
-		btrfs_set_extent_delalloc(inode, page_start, page_end);
+		btrfs_set_extent_delalloc(inode, page_start, page_end, NULL);
 
 		set_page_dirty(page);
 		dirty_page++;
@@ -3487,7 +3487,7 @@ static struct inode *create_reloc_inode(struct btrfs_fs_info *fs_info,
 	key.objectid = objectid;
 	key.type = BTRFS_INODE_ITEM_KEY;
 	key.offset = 0;
-	inode = btrfs_iget(root->fs_info->sb, &key, root);
+	inode = btrfs_iget(root->fs_info->sb, &key, root, NULL);
 	BUG_ON(IS_ERR(inode) || is_bad_inode(inode));
 	BTRFS_I(inode)->index_cnt = group->key.objectid;
 
diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index 8a1ea6e64575..9ac612e6ca60 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -63,10 +63,10 @@ static void btrfs_put_super(struct super_block *sb)
 }
 
 enum {
-	Opt_degraded, Opt_subvol, Opt_device, Opt_nodatasum, Opt_nodatacow,
-	Opt_max_extent, Opt_max_inline, Opt_alloc_start, Opt_nobarrier,
-	Opt_ssd, Opt_nossd, Opt_ssd_spread, Opt_thread_pool, Opt_noacl,
-	Opt_compress, Opt_compress_force, Opt_notreelog, Opt_ratio,
+	Opt_degraded, Opt_subvol, Opt_subvolid, Opt_device, Opt_nodatasum,
+	Opt_nodatacow, Opt_max_extent, Opt_max_inline, Opt_alloc_start,
+	Opt_nobarrier, Opt_ssd, Opt_nossd, Opt_ssd_spread, Opt_thread_pool,
+	Opt_noacl, Opt_compress, Opt_compress_force, Opt_notreelog, Opt_ratio,
 	Opt_flushoncommit,
 	Opt_discard, Opt_err,
 };
@@ -74,6 +74,7 @@ enum {
 static match_table_t tokens = {
 	{Opt_degraded, "degraded"},
 	{Opt_subvol, "subvol=%s"},
+	{Opt_subvolid, "subvolid=%d"},
 	{Opt_device, "device=%s"},
 	{Opt_nodatasum, "nodatasum"},
 	{Opt_nodatacow, "nodatacow"},
@@ -95,31 +96,6 @@ static match_table_t tokens = {
 	{Opt_err, NULL},
 };
 
-u64 btrfs_parse_size(char *str)
-{
-	u64 res;
-	int mult = 1;
-	char *end;
-	char last;
-
-	res = simple_strtoul(str, &end, 10);
-
-	last = end[0];
-	if (isalpha(last)) {
-		last = tolower(last);
-		switch (last) {
-		case 'g':
-			mult *= 1024;
-		case 'm':
-			mult *= 1024;
-		case 'k':
-			mult *= 1024;
-		}
-		res = res * mult;
-	}
-	return res;
-}
-
 /*
  * Regular mount options parser.  Everything that is needed only when
  * reading in a new superblock is parsed here.
@@ -128,7 +104,7 @@ int btrfs_parse_options(struct btrfs_root *root, char *options)
 {
 	struct btrfs_fs_info *info = root->fs_info;
 	substring_t args[MAX_OPT_ARGS];
-	char *p, *num;
+	char *p, *num, *orig;
 	int intarg;
 	int ret = 0;
 
@@ -143,6 +119,7 @@ int btrfs_parse_options(struct btrfs_root *root, char *options)
 	if (!options)
 		return -ENOMEM;
 
+	orig = options;
 
 	while ((p = strsep(&options, ",")) != NULL) {
 		int token;
@@ -156,6 +133,7 @@ int btrfs_parse_options(struct btrfs_root *root, char *options)
 			btrfs_set_opt(info->mount_opt, DEGRADED);
 			break;
 		case Opt_subvol:
+		case Opt_subvolid:
 		case Opt_device:
 			/*
 			 * These are parsed by btrfs_parse_early_options
@@ -213,7 +191,7 @@ int btrfs_parse_options(struct btrfs_root *root, char *options)
 		case Opt_max_extent:
 			num = match_strdup(&args[0]);
 			if (num) {
-				info->max_extent = btrfs_parse_size(num);
+				info->max_extent = memparse(num, NULL);
 				kfree(num);
 
 				info->max_extent = max_t(u64,
@@ -225,7 +203,7 @@ int btrfs_parse_options(struct btrfs_root *root, char *options)
 		case Opt_max_inline:
 			num = match_strdup(&args[0]);
 			if (num) {
-				info->max_inline = btrfs_parse_size(num);
+				info->max_inline = memparse(num, NULL);
 				kfree(num);
 
 				if (info->max_inline) {
@@ -240,7 +218,7 @@ int btrfs_parse_options(struct btrfs_root *root, char *options)
 		case Opt_alloc_start:
 			num = match_strdup(&args[0]);
 			if (num) {
-				info->alloc_start = btrfs_parse_size(num);
+				info->alloc_start = memparse(num, NULL);
 				kfree(num);
 				printk(KERN_INFO
 					"btrfs: allocations start at %llu\n",
@@ -280,7 +258,7 @@ int btrfs_parse_options(struct btrfs_root *root, char *options)
 		}
 	}
 out:
-	kfree(options);
+	kfree(orig);
 	return ret;
 }
 
@@ -291,12 +269,13 @@ out:
  * only when we need to allocate a new super block.
  */
 static int btrfs_parse_early_options(const char *options, fmode_t flags,
-		void *holder, char **subvol_name,
+		void *holder, char **subvol_name, u64 *subvol_objectid,
 		struct btrfs_fs_devices **fs_devices)
 {
 	substring_t args[MAX_OPT_ARGS];
 	char *opts, *p;
 	int error = 0;
+	int intarg;
 
 	if (!options)
 		goto out;
@@ -319,6 +298,18 @@ static int btrfs_parse_early_options(const char *options, fmode_t flags,
 		case Opt_subvol:
 			*subvol_name = match_strdup(&args[0]);
 			break;
+		case Opt_subvolid:
+			intarg = 0;
+			error = match_int(&args[0], &intarg);
+			if (!error) {
+				/* we want the original fs_tree */
+				if (!intarg)
+					*subvol_objectid =
+						BTRFS_FS_TREE_OBJECTID;
+				else
+					*subvol_objectid = intarg;
+			}
+			break;
 		case Opt_device:
 			error = btrfs_scan_one_device(match_strdup(&args[0]),
 					flags, holder, fs_devices);
@@ -346,6 +337,110 @@ static int btrfs_parse_early_options(const char *options, fmode_t flags,
 	return error;
 }
 
+static struct dentry *get_default_root(struct super_block *sb,
+				       u64 subvol_objectid)
+{
+	struct btrfs_root *root = sb->s_fs_info;
+	struct btrfs_root *new_root;
+	struct btrfs_dir_item *di;
+	struct btrfs_path *path;
+	struct btrfs_key location;
+	struct inode *inode;
+	struct dentry *dentry;
+	u64 dir_id;
+	int new = 0;
+
+	/*
+	 * We have a specific subvol we want to mount, just setup location and
+	 * go look up the root.
+	 */
+	if (subvol_objectid) {
+		location.objectid = subvol_objectid;
+		location.type = BTRFS_ROOT_ITEM_KEY;
+		location.offset = (u64)-1;
+		goto find_root;
+	}
+
+	path = btrfs_alloc_path();
+	if (!path)
+		return ERR_PTR(-ENOMEM);
+	path->leave_spinning = 1;
+
+	/*
+	 * Find the "default" dir item which points to the root item that we
+	 * will mount by default if we haven't been given a specific subvolume
+	 * to mount.
+	 */
+	dir_id = btrfs_super_root_dir(&root->fs_info->super_copy);
+	di = btrfs_lookup_dir_item(NULL, root, path, dir_id, "default", 7, 0);
+	if (!di) {
+		/*
+		 * Ok the default dir item isn't there.  This is weird since
+		 * it's always been there, but don't freak out, just try and
+		 * mount to root most subvolume.
+		 */
+		btrfs_free_path(path);
+		dir_id = BTRFS_FIRST_FREE_OBJECTID;
+		new_root = root->fs_info->fs_root;
+		goto setup_root;
+	}
+
+	btrfs_dir_item_key_to_cpu(path->nodes[0], di, &location);
+	btrfs_free_path(path);
+
+find_root:
+	new_root = btrfs_read_fs_root_no_name(root->fs_info, &location);
+	if (IS_ERR(new_root))
+		return ERR_PTR(PTR_ERR(new_root));
+
+	if (btrfs_root_refs(&new_root->root_item) == 0)
+		return ERR_PTR(-ENOENT);
+
+	dir_id = btrfs_root_dirid(&new_root->root_item);
+setup_root:
+	location.objectid = dir_id;
+	location.type = BTRFS_INODE_ITEM_KEY;
+	location.offset = 0;
+
+	inode = btrfs_iget(sb, &location, new_root, &new);
+	if (!inode)
+		return ERR_PTR(-ENOMEM);
+
+	/*
+	 * If we're just mounting the root most subvol put the inode and return
+	 * a reference to the dentry.  We will have already gotten a reference
+	 * to the inode in btrfs_fill_super so we're good to go.
+	 */
+	if (!new && sb->s_root->d_inode == inode) {
+		iput(inode);
+		return dget(sb->s_root);
+	}
+
+	if (new) {
+		const struct qstr name = { .name = "/", .len = 1 };
+
+		/*
+		 * New inode, we need to make the dentry a sibling of s_root so
+		 * everything gets cleaned up properly on unmount.
+		 */
+		dentry = d_alloc(sb->s_root, &name);
+		if (!dentry) {
+			iput(inode);
+			return ERR_PTR(-ENOMEM);
+		}
+		d_splice_alias(inode, dentry);
+	} else {
+		/*
+		 * We found the inode in cache, just find a dentry for it and
+		 * put the reference to the inode we just got.
+		 */
+		dentry = d_find_alias(inode);
+		iput(inode);
+	}
+
+	return dentry;
+}
+
 static int btrfs_fill_super(struct super_block *sb,
 			    struct btrfs_fs_devices *fs_devices,
 			    void *data, int silent)
@@ -379,7 +474,7 @@ static int btrfs_fill_super(struct super_block *sb,
 	key.objectid = BTRFS_FIRST_FREE_OBJECTID;
 	key.type = BTRFS_INODE_ITEM_KEY;
 	key.offset = 0;
-	inode = btrfs_iget(sb, &key, tree_root->fs_info->fs_root);
+	inode = btrfs_iget(sb, &key, tree_root->fs_info->fs_root, NULL);
 	if (IS_ERR(inode)) {
 		err = PTR_ERR(inode);
 		goto fail_close;
@@ -391,12 +486,6 @@ static int btrfs_fill_super(struct super_block *sb,
 		err = -ENOMEM;
 		goto fail_close;
 	}
-#if 0
-	/* this does the super kobj at the same time */
-	err = btrfs_sysfs_add_super(tree_root->fs_info);
-	if (err)
-		goto fail_close;
-#endif
 
 	sb->s_root = root_dentry;
 
@@ -488,19 +577,22 @@ static int btrfs_test_super(struct super_block *s, void *data)
 static int btrfs_get_sb(struct file_system_type *fs_type, int flags,
 		const char *dev_name, void *data, struct vfsmount *mnt)
 {
-	char *subvol_name = NULL;
 	struct block_device *bdev = NULL;
 	struct super_block *s;
 	struct dentry *root;
 	struct btrfs_fs_devices *fs_devices = NULL;
 	fmode_t mode = FMODE_READ;
+	char *subvol_name = NULL;
+	u64 subvol_objectid = 0;
 	int error = 0;
+	int found = 0;
 
 	if (!(flags & MS_RDONLY))
 		mode |= FMODE_WRITE;
 
 	error = btrfs_parse_early_options(data, mode, fs_type,
-					  &subvol_name, &fs_devices);
+					  &subvol_name, &subvol_objectid,
+					  &fs_devices);
 	if (error)
 		return error;
 
@@ -529,6 +621,7 @@ static int btrfs_get_sb(struct file_system_type *fs_type, int flags,
 			goto error_close_devices;
 		}
 
+		found = 1;
 		btrfs_close_devices(fs_devices);
 	} else {
 		char b[BDEVNAME_SIZE];
@@ -546,25 +639,35 @@ static int btrfs_get_sb(struct file_system_type *fs_type, int flags,
 		s->s_flags |= MS_ACTIVE;
 	}
 
-	if (!strcmp(subvol_name, "."))
-		root = dget(s->s_root);
-	else {
-		mutex_lock(&s->s_root->d_inode->i_mutex);
-		root = lookup_one_len(subvol_name, s->s_root,
+	root = get_default_root(s, subvol_objectid);
+	if (IS_ERR(root)) {
+		error = PTR_ERR(root);
+		deactivate_locked_super(s);
+		goto error;
+	}
+	/* if they gave us a subvolume name bind mount into that */
+	if (strcmp(subvol_name, ".")) {
+		struct dentry *new_root;
+		mutex_lock(&root->d_inode->i_mutex);
+		new_root = lookup_one_len(subvol_name, root,
 				      strlen(subvol_name));
-		mutex_unlock(&s->s_root->d_inode->i_mutex);
+		mutex_unlock(&root->d_inode->i_mutex);
 
-		if (IS_ERR(root)) {
+		if (IS_ERR(new_root)) {
 			deactivate_locked_super(s);
-			error = PTR_ERR(root);
-			goto error_free_subvol_name;
+			error = PTR_ERR(new_root);
+			dput(root);
+			goto error_close_devices;
 		}
-		if (!root->d_inode) {
+		if (!new_root->d_inode) {
 			dput(root);
+			dput(new_root);
 			deactivate_locked_super(s);
 			error = -ENXIO;
-			goto error_free_subvol_name;
+			goto error_close_devices;
 		}
+		dput(root);
+		root = new_root;
 	}
 
 	mnt->mnt_sb = s;
@@ -579,6 +682,7 @@ error_close_devices:
 	btrfs_close_devices(fs_devices);
 error_free_subvol_name:
 	kfree(subvol_name);
+error:
 	return error;
 }
 
@@ -623,14 +727,37 @@ static int btrfs_statfs(struct dentry *dentry, struct kstatfs *buf)
 {
 	struct btrfs_root *root = btrfs_sb(dentry->d_sb);
 	struct btrfs_super_block *disk_super = &root->fs_info->super_copy;
+	struct list_head *head = &root->fs_info->space_info;
+	struct btrfs_space_info *found;
+	u64 total_used = 0;
+	u64 data_used = 0;
 	int bits = dentry->d_sb->s_blocksize_bits;
 	__be32 *fsid = (__be32 *)root->fs_info->fsid;
 
+	rcu_read_lock();
+	list_for_each_entry_rcu(found, head, list) {
+		if (found->flags & (BTRFS_BLOCK_GROUP_DUP|
+				    BTRFS_BLOCK_GROUP_RAID10|
+				    BTRFS_BLOCK_GROUP_RAID1)) {
+			total_used += found->bytes_used;
+			if (found->flags & BTRFS_BLOCK_GROUP_DATA)
+				data_used += found->bytes_used;
+			else
+				data_used += found->total_bytes;
+		}
+
+		total_used += found->bytes_used;
+		if (found->flags & BTRFS_BLOCK_GROUP_DATA)
+			data_used += found->bytes_used;
+		else
+			data_used += found->total_bytes;
+	}
+	rcu_read_unlock();
+
 	buf->f_namelen = BTRFS_NAME_LEN;
 	buf->f_blocks = btrfs_super_total_bytes(disk_super) >> bits;
-	buf->f_bfree = buf->f_blocks -
-		(btrfs_super_bytes_used(disk_super) >> bits);
-	buf->f_bavail = buf->f_bfree;
+	buf->f_bfree = buf->f_blocks - (total_used >> bits);
+	buf->f_bavail = buf->f_blocks - (data_used >> bits);
 	buf->f_bsize = dentry->d_sb->s_blocksize;
 	buf->f_type = BTRFS_SUPER_MAGIC;
 
diff --git a/fs/btrfs/sysfs.c b/fs/btrfs/sysfs.c
index a240b6fa81df..4ce16ef702a3 100644
--- a/fs/btrfs/sysfs.c
+++ b/fs/btrfs/sysfs.c
@@ -164,12 +164,12 @@ static void btrfs_root_release(struct kobject *kobj)
 	complete(&root->kobj_unregister);
 }
 
-static struct sysfs_ops btrfs_super_attr_ops = {
+static const struct sysfs_ops btrfs_super_attr_ops = {
 	.show	= btrfs_super_attr_show,
 	.store	= btrfs_super_attr_store,
 };
 
-static struct sysfs_ops btrfs_root_attr_ops = {
+static const struct sysfs_ops btrfs_root_attr_ops = {
 	.show	= btrfs_root_attr_show,
 	.store	= btrfs_root_attr_store,
 };
diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c
index b2acc79f1b34..2d654c1c794d 100644
--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -69,7 +69,7 @@ static noinline int join_transaction(struct btrfs_root *root)
 		cur_trans->commit_done = 0;
 		cur_trans->start_time = get_seconds();
 
-		cur_trans->delayed_refs.root.rb_node = NULL;
+		cur_trans->delayed_refs.root = RB_ROOT;
 		cur_trans->delayed_refs.num_entries = 0;
 		cur_trans->delayed_refs.num_heads_ready = 0;
 		cur_trans->delayed_refs.num_heads = 0;
@@ -997,13 +997,10 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
 
 		mutex_unlock(&root->fs_info->trans_mutex);
 
-		if (flush_on_commit) {
+		if (flush_on_commit || snap_pending) {
 			btrfs_start_delalloc_inodes(root, 1);
 			ret = btrfs_wait_ordered_extents(root, 0, 1);
 			BUG_ON(ret);
-		} else if (snap_pending) {
-			ret = btrfs_wait_ordered_extents(root, 0, 1);
-			BUG_ON(ret);
 		}
 
 		/*
diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index 4a9434b622ec..1255fcc8ade5 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -445,7 +445,7 @@ static noinline struct inode *read_one_inode(struct btrfs_root *root,
 	key.objectid = objectid;
 	key.type = BTRFS_INODE_ITEM_KEY;
 	key.offset = 0;
-	inode = btrfs_iget(root->fs_info->sb, &key, root);
+	inode = btrfs_iget(root->fs_info->sb, &key, root, NULL);
 	if (IS_ERR(inode)) {
 		inode = NULL;
 	} else if (is_bad_inode(inode)) {
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index 41ecbb2347f2..9df8e3f1ccab 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -256,13 +256,13 @@ loop_lock:
 			wake_up(&fs_info->async_submit_wait);
 
 		BUG_ON(atomic_read(&cur->bi_cnt) == 0);
-		submit_bio(cur->bi_rw, cur);
-		num_run++;
-		batch_run++;
 
 		if (bio_rw_flagged(cur, BIO_RW_SYNCIO))
 			num_sync_run++;
 
+		submit_bio(cur->bi_rw, cur);
+		num_run++;
+		batch_run++;
 		if (need_resched()) {
 			if (num_sync_run) {
 				blk_run_backing_dev(bdi, NULL);
@@ -325,16 +325,6 @@ loop_lock:
 		num_sync_run = 0;
 		blk_run_backing_dev(bdi, NULL);
 	}
-
-	cond_resched();
-	if (again)
-		goto loop;
-
-	spin_lock(&device->io_lock);
-	if (device->pending_bios.head || device->pending_sync_bios.head)
-		goto loop_lock;
-	spin_unlock(&device->io_lock);
-
 	/*
 	 * IO has already been through a long path to get here.  Checksumming,
 	 * async helper threads, perhaps compression.  We've done a pretty
@@ -346,6 +336,16 @@ loop_lock:
 	 * cared about found its way down here.
 	 */
 	blk_run_backing_dev(bdi, NULL);
+
+	cond_resched();
+	if (again)
+		goto loop;
+
+	spin_lock(&device->io_lock);
+	if (device->pending_bios.head || device->pending_sync_bios.head)
+		goto loop_lock;
+	spin_unlock(&device->io_lock);
+
 done:
 	return 0;
 }
@@ -365,6 +365,7 @@ static noinline int device_list_add(const char *path,
 	struct btrfs_device *device;
 	struct btrfs_fs_devices *fs_devices;
 	u64 found_transid = btrfs_super_generation(disk_super);
+	char *name;
 
 	fs_devices = find_fsid(disk_super->fsid);
 	if (!fs_devices) {
@@ -411,6 +412,12 @@ static noinline int device_list_add(const char *path,
 
 		device->fs_devices = fs_devices;
 		fs_devices->num_devices++;
+	} else if (strcmp(device->name, path)) {
+		name = kstrdup(path, GFP_NOFS);
+		if (!name)
+			return -ENOMEM;
+		kfree(device->name);
+		device->name = name;
 	}
 
 	if (found_transid > fs_devices->latest_trans) {
@@ -592,7 +599,7 @@ static int __btrfs_open_devices(struct btrfs_fs_devices *fs_devices,
 			goto error_close;
 
 		disk_super = (struct btrfs_super_block *)bh->b_data;
-		devid = le64_to_cpu(disk_super->dev_item.devid);
+		devid = btrfs_stack_device_id(&disk_super->dev_item);
 		if (devid != device->devid)
 			goto error_brelse;
 
@@ -694,7 +701,7 @@ int btrfs_scan_one_device(const char *path, fmode_t flags, void *holder,
 		goto error_close;
 	}
 	disk_super = (struct btrfs_super_block *)bh->b_data;
-	devid = le64_to_cpu(disk_super->dev_item.devid);
+	devid = btrfs_stack_device_id(&disk_super->dev_item);
 	transid = btrfs_super_generation(disk_super);
 	if (disk_super->label[0])
 		printk(KERN_INFO "device label %s ", disk_super->label);
@@ -1187,7 +1194,7 @@ int btrfs_rm_device(struct btrfs_root *root, char *device_path)
 			goto error_close;
 		}
 		disk_super = (struct btrfs_super_block *)bh->b_data;
-		devid = le64_to_cpu(disk_super->dev_item.devid);
+		devid = btrfs_stack_device_id(&disk_super->dev_item);
 		dev_uuid = disk_super->dev_item.uuid;
 		device = btrfs_find_device(root, devid, dev_uuid,
 					   disk_super->fsid);
diff --git a/fs/buffer.c b/fs/buffer.c
index 6fa530256bfd..c9c266db0624 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -2893,7 +2893,7 @@ int block_write_full_page_endio(struct page *page, get_block_t *get_block,
 
 	/*
 	 * The page straddles i_size.  It must be zeroed out on each and every
-	 * writepage invokation because it may be mmapped.  "A file is mapped
+	 * writepage invocation because it may be mmapped.  "A file is mapped
 	 * in multiples of the page size.  For a file that is not a multiple of
 	 * the  page size, the remaining memory is zeroed when mapped, and
 	 * writes to that region are not written out to the file."
@@ -3265,7 +3265,7 @@ static void recalc_bh_state(void)
 	
 struct buffer_head *alloc_buffer_head(gfp_t gfp_flags)
 {
-	struct buffer_head *ret = kmem_cache_alloc(bh_cachep, gfp_flags);
+	struct buffer_head *ret = kmem_cache_zalloc(bh_cachep, gfp_flags);
 	if (ret) {
 		INIT_LIST_HEAD(&ret->b_assoc_buffers);
 		get_cpu_var(bh_accounting).nr++;
@@ -3352,15 +3352,6 @@ int bh_submit_read(struct buffer_head *bh)
 }
 EXPORT_SYMBOL(bh_submit_read);
 
-static void
-init_buffer_head(void *data)
-{
-	struct buffer_head *bh = data;
-
-	memset(bh, 0, sizeof(*bh));
-	INIT_LIST_HEAD(&bh->b_assoc_buffers);
-}
-
 void __init buffer_init(void)
 {
 	int nrpages;
@@ -3369,7 +3360,7 @@ void __init buffer_init(void)
 			sizeof(struct buffer_head), 0,
 				(SLAB_RECLAIM_ACCOUNT|SLAB_PANIC|
 				SLAB_MEM_SPREAD),
-				init_buffer_head);
+				NULL);
 
 	/*
 	 * Limit the bh occupancy to 10% of ZONE_NORMAL
diff --git a/fs/ceph/Kconfig b/fs/ceph/Kconfig
new file mode 100644
index 000000000000..04b8280582a9
--- /dev/null
+++ b/fs/ceph/Kconfig
@@ -0,0 +1,27 @@
+config CEPH_FS
+        tristate "Ceph distributed file system (EXPERIMENTAL)"
+	depends on INET && EXPERIMENTAL
+	select LIBCRC32C
+	select CONFIG_CRYPTO_AES
+	help
+	  Choose Y or M here to include support for mounting the
+	  experimental Ceph distributed file system.  Ceph is an extremely
+	  scalable file system designed to provide high performance,
+	  reliable access to petabytes of storage.
+
+	  More information at http://ceph.newdream.net/.
+
+	  If unsure, say N.
+
+config CEPH_FS_PRETTYDEBUG
+	bool "Include file:line in ceph debug output"
+	depends on CEPH_FS
+	default n
+	help
+	  If you say Y here, debug output will include a filename and
+	  line to aid debugging.  This icnreases kernel size and slows
+	  execution slightly when debug call sites are enabled (e.g.,
+	  via CONFIG_DYNAMIC_DEBUG).
+
+	  If unsure, say N.
+
diff --git a/fs/ceph/Makefile b/fs/ceph/Makefile
new file mode 100644
index 000000000000..6a660e610be8
--- /dev/null
+++ b/fs/ceph/Makefile
@@ -0,0 +1,39 @@
+#
+# Makefile for CEPH filesystem.
+#
+
+ifneq ($(KERNELRELEASE),)
+
+obj-$(CONFIG_CEPH_FS) += ceph.o
+
+ceph-objs := super.o inode.o dir.o file.o addr.o ioctl.o \
+	export.o caps.o snap.o xattr.o \
+	messenger.o msgpool.o buffer.o pagelist.o \
+	mds_client.o mdsmap.o \
+	mon_client.o \
+	osd_client.o osdmap.o crush/crush.o crush/mapper.o crush/hash.o \
+	debugfs.o \
+	auth.o auth_none.o \
+	crypto.o armor.o \
+	auth_x.o \
+	ceph_fs.o ceph_strings.o ceph_hash.o ceph_frag.o
+
+else
+#Otherwise we were called directly from the command
+# line; invoke the kernel build system.
+
+KERNELDIR ?= /lib/modules/$(shell uname -r)/build
+PWD := $(shell pwd)
+
+default: all
+
+all:
+	$(MAKE) -C $(KERNELDIR) M=$(PWD) CONFIG_CEPH_FS=m modules
+
+modules_install:
+	$(MAKE) -C $(KERNELDIR) M=$(PWD) CONFIG_CEPH_FS=m modules_install
+
+clean:
+	$(MAKE) -C $(KERNELDIR) M=$(PWD) clean
+
+endif
diff --git a/fs/ceph/README b/fs/ceph/README
new file mode 100644
index 000000000000..18352fab37c0
--- /dev/null
+++ b/fs/ceph/README
@@ -0,0 +1,20 @@
+#
+# The following files are shared by (and manually synchronized
+# between) the Ceph userland and kernel client.
+#
+# userland                  kernel
+src/include/ceph_fs.h	    fs/ceph/ceph_fs.h
+src/include/ceph_fs.cc	    fs/ceph/ceph_fs.c
+src/include/msgr.h	    fs/ceph/msgr.h
+src/include/rados.h	    fs/ceph/rados.h
+src/include/ceph_strings.cc fs/ceph/ceph_strings.c
+src/include/ceph_frag.h	    fs/ceph/ceph_frag.h
+src/include/ceph_frag.cc    fs/ceph/ceph_frag.c
+src/include/ceph_hash.h	    fs/ceph/ceph_hash.h
+src/include/ceph_hash.cc    fs/ceph/ceph_hash.c
+src/crush/crush.c	    fs/ceph/crush/crush.c
+src/crush/crush.h	    fs/ceph/crush/crush.h
+src/crush/mapper.c	    fs/ceph/crush/mapper.c
+src/crush/mapper.h	    fs/ceph/crush/mapper.h
+src/crush/hash.h	    fs/ceph/crush/hash.h
+src/crush/hash.c	    fs/ceph/crush/hash.c
diff --git a/fs/ceph/addr.c b/fs/ceph/addr.c
new file mode 100644
index 000000000000..23bb0ceabe31
--- /dev/null
+++ b/fs/ceph/addr.c
@@ -0,0 +1,1188 @@
+#include "ceph_debug.h"
+
+#include <linux/backing-dev.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/pagemap.h>
+#include <linux/writeback.h>	/* generic_writepages */
+#include <linux/pagevec.h>
+#include <linux/task_io_accounting_ops.h>
+
+#include "super.h"
+#include "osd_client.h"
+
+/*
+ * Ceph address space ops.
+ *
+ * There are a few funny things going on here.
+ *
+ * The page->private field is used to reference a struct
+ * ceph_snap_context for _every_ dirty page.  This indicates which
+ * snapshot the page was logically dirtied in, and thus which snap
+ * context needs to be associated with the osd write during writeback.
+ *
+ * Similarly, struct ceph_inode_info maintains a set of counters to
+ * count dirty pages on the inode.  In the absense of snapshots,
+ * i_wrbuffer_ref == i_wrbuffer_ref_head == the dirty page count.
+ *
+ * When a snapshot is taken (that is, when the client receives
+ * notification that a snapshot was taken), each inode with caps and
+ * with dirty pages (dirty pages implies there is a cap) gets a new
+ * ceph_cap_snap in the i_cap_snaps list (which is sorted in ascending
+ * order, new snaps go to the tail).  The i_wrbuffer_ref_head count is
+ * moved to capsnap->dirty. (Unless a sync write is currently in
+ * progress.  In that case, the capsnap is said to be "pending", new
+ * writes cannot start, and the capsnap isn't "finalized" until the
+ * write completes (or fails) and a final size/mtime for the inode for
+ * that snap can be settled upon.)  i_wrbuffer_ref_head is reset to 0.
+ *
+ * On writeback, we must submit writes to the osd IN SNAP ORDER.  So,
+ * we look for the first capsnap in i_cap_snaps and write out pages in
+ * that snap context _only_.  Then we move on to the next capsnap,
+ * eventually reaching the "live" or "head" context (i.e., pages that
+ * are not yet snapped) and are writing the most recently dirtied
+ * pages.
+ *
+ * Invalidate and so forth must take care to ensure the dirty page
+ * accounting is preserved.
+ */
+
+#define CONGESTION_ON_THRESH(congestion_kb) (congestion_kb >> (PAGE_SHIFT-10))
+#define CONGESTION_OFF_THRESH(congestion_kb)				\
+	(CONGESTION_ON_THRESH(congestion_kb) -				\
+	 (CONGESTION_ON_THRESH(congestion_kb) >> 2))
+
+
+
+/*
+ * Dirty a page.  Optimistically adjust accounting, on the assumption
+ * that we won't race with invalidate.  If we do, readjust.
+ */
+static int ceph_set_page_dirty(struct page *page)
+{
+	struct address_space *mapping = page->mapping;
+	struct inode *inode;
+	struct ceph_inode_info *ci;
+	int undo = 0;
+	struct ceph_snap_context *snapc;
+
+	if (unlikely(!mapping))
+		return !TestSetPageDirty(page);
+
+	if (TestSetPageDirty(page)) {
+		dout("%p set_page_dirty %p idx %lu -- already dirty\n",
+		     mapping->host, page, page->index);
+		return 0;
+	}
+
+	inode = mapping->host;
+	ci = ceph_inode(inode);
+
+	/*
+	 * Note that we're grabbing a snapc ref here without holding
+	 * any locks!
+	 */
+	snapc = ceph_get_snap_context(ci->i_snap_realm->cached_context);
+
+	/* dirty the head */
+	spin_lock(&inode->i_lock);
+	if (ci->i_wrbuffer_ref_head == 0)
+		ci->i_head_snapc = ceph_get_snap_context(snapc);
+	++ci->i_wrbuffer_ref_head;
+	if (ci->i_wrbuffer_ref == 0)
+		igrab(inode);
+	++ci->i_wrbuffer_ref;
+	dout("%p set_page_dirty %p idx %lu head %d/%d -> %d/%d "
+	     "snapc %p seq %lld (%d snaps)\n",
+	     mapping->host, page, page->index,
+	     ci->i_wrbuffer_ref-1, ci->i_wrbuffer_ref_head-1,
+	     ci->i_wrbuffer_ref, ci->i_wrbuffer_ref_head,
+	     snapc, snapc->seq, snapc->num_snaps);
+	spin_unlock(&inode->i_lock);
+
+	/* now adjust page */
+	spin_lock_irq(&mapping->tree_lock);
+	if (page->mapping) {	/* Race with truncate? */
+		WARN_ON_ONCE(!PageUptodate(page));
+
+		if (mapping_cap_account_dirty(mapping)) {
+			__inc_zone_page_state(page, NR_FILE_DIRTY);
+			__inc_bdi_stat(mapping->backing_dev_info,
+					BDI_RECLAIMABLE);
+			task_io_account_write(PAGE_CACHE_SIZE);
+		}
+		radix_tree_tag_set(&mapping->page_tree,
+				page_index(page), PAGECACHE_TAG_DIRTY);
+
+		/*
+		 * Reference snap context in page->private.  Also set
+		 * PagePrivate so that we get invalidatepage callback.
+		 */
+		page->private = (unsigned long)snapc;
+		SetPagePrivate(page);
+	} else {
+		dout("ANON set_page_dirty %p (raced truncate?)\n", page);
+		undo = 1;
+	}
+
+	spin_unlock_irq(&mapping->tree_lock);
+
+	if (undo)
+		/* whoops, we failed to dirty the page */
+		ceph_put_wrbuffer_cap_refs(ci, 1, snapc);
+
+	__mark_inode_dirty(mapping->host, I_DIRTY_PAGES);
+
+	BUG_ON(!PageDirty(page));
+	return 1;
+}
+
+/*
+ * If we are truncating the full page (i.e. offset == 0), adjust the
+ * dirty page counters appropriately.  Only called if there is private
+ * data on the page.
+ */
+static void ceph_invalidatepage(struct page *page, unsigned long offset)
+{
+	struct inode *inode;
+	struct ceph_inode_info *ci;
+	struct ceph_snap_context *snapc = (void *)page->private;
+
+	BUG_ON(!PageLocked(page));
+	BUG_ON(!page->private);
+	BUG_ON(!PagePrivate(page));
+	BUG_ON(!page->mapping);
+
+	inode = page->mapping->host;
+
+	/*
+	 * We can get non-dirty pages here due to races between
+	 * set_page_dirty and truncate_complete_page; just spit out a
+	 * warning, in case we end up with accounting problems later.
+	 */
+	if (!PageDirty(page))
+		pr_err("%p invalidatepage %p page not dirty\n", inode, page);
+
+	if (offset == 0)
+		ClearPageChecked(page);
+
+	ci = ceph_inode(inode);
+	if (offset == 0) {
+		dout("%p invalidatepage %p idx %lu full dirty page %lu\n",
+		     inode, page, page->index, offset);
+		ceph_put_wrbuffer_cap_refs(ci, 1, snapc);
+		ceph_put_snap_context(snapc);
+		page->private = 0;
+		ClearPagePrivate(page);
+	} else {
+		dout("%p invalidatepage %p idx %lu partial dirty page\n",
+		     inode, page, page->index);
+	}
+}
+
+/* just a sanity check */
+static int ceph_releasepage(struct page *page, gfp_t g)
+{
+	struct inode *inode = page->mapping ? page->mapping->host : NULL;
+	dout("%p releasepage %p idx %lu\n", inode, page, page->index);
+	WARN_ON(PageDirty(page));
+	WARN_ON(page->private);
+	WARN_ON(PagePrivate(page));
+	return 0;
+}
+
+/*
+ * read a single page, without unlocking it.
+ */
+static int readpage_nounlock(struct file *filp, struct page *page)
+{
+	struct inode *inode = filp->f_dentry->d_inode;
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	struct ceph_osd_client *osdc = &ceph_inode_to_client(inode)->osdc;
+	int err = 0;
+	u64 len = PAGE_CACHE_SIZE;
+
+	dout("readpage inode %p file %p page %p index %lu\n",
+	     inode, filp, page, page->index);
+	err = ceph_osdc_readpages(osdc, ceph_vino(inode), &ci->i_layout,
+				  page->index << PAGE_CACHE_SHIFT, &len,
+				  ci->i_truncate_seq, ci->i_truncate_size,
+				  &page, 1);
+	if (err == -ENOENT)
+		err = 0;
+	if (err < 0) {
+		SetPageError(page);
+		goto out;
+	} else if (err < PAGE_CACHE_SIZE) {
+		/* zero fill remainder of page */
+		zero_user_segment(page, err, PAGE_CACHE_SIZE);
+	}
+	SetPageUptodate(page);
+
+out:
+	return err < 0 ? err : 0;
+}
+
+static int ceph_readpage(struct file *filp, struct page *page)
+{
+	int r = readpage_nounlock(filp, page);
+	unlock_page(page);
+	return r;
+}
+
+/*
+ * Build a vector of contiguous pages from the provided page list.
+ */
+static struct page **page_vector_from_list(struct list_head *page_list,
+					   unsigned *nr_pages)
+{
+	struct page **pages;
+	struct page *page;
+	int next_index, contig_pages = 0;
+
+	/* build page vector */
+	pages = kmalloc(sizeof(*pages) * *nr_pages, GFP_NOFS);
+	if (!pages)
+		return ERR_PTR(-ENOMEM);
+
+	BUG_ON(list_empty(page_list));
+	next_index = list_entry(page_list->prev, struct page, lru)->index;
+	list_for_each_entry_reverse(page, page_list, lru) {
+		if (page->index == next_index) {
+			dout("readpages page %d %p\n", contig_pages, page);
+			pages[contig_pages] = page;
+			contig_pages++;
+			next_index++;
+		} else {
+			break;
+		}
+	}
+	*nr_pages = contig_pages;
+	return pages;
+}
+
+/*
+ * Read multiple pages.  Leave pages we don't read + unlock in page_list;
+ * the caller (VM) cleans them up.
+ */
+static int ceph_readpages(struct file *file, struct address_space *mapping,
+			  struct list_head *page_list, unsigned nr_pages)
+{
+	struct inode *inode = file->f_dentry->d_inode;
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	struct ceph_osd_client *osdc = &ceph_inode_to_client(inode)->osdc;
+	int rc = 0;
+	struct page **pages;
+	struct pagevec pvec;
+	loff_t offset;
+	u64 len;
+
+	dout("readpages %p file %p nr_pages %d\n",
+	     inode, file, nr_pages);
+
+	pages = page_vector_from_list(page_list, &nr_pages);
+	if (IS_ERR(pages))
+		return PTR_ERR(pages);
+
+	/* guess read extent */
+	offset = pages[0]->index << PAGE_CACHE_SHIFT;
+	len = nr_pages << PAGE_CACHE_SHIFT;
+	rc = ceph_osdc_readpages(osdc, ceph_vino(inode), &ci->i_layout,
+				 offset, &len,
+				 ci->i_truncate_seq, ci->i_truncate_size,
+				 pages, nr_pages);
+	if (rc == -ENOENT)
+		rc = 0;
+	if (rc < 0)
+		goto out;
+
+	/* set uptodate and add to lru in pagevec-sized chunks */
+	pagevec_init(&pvec, 0);
+	for (; !list_empty(page_list) && len > 0;
+	     rc -= PAGE_CACHE_SIZE, len -= PAGE_CACHE_SIZE) {
+		struct page *page =
+			list_entry(page_list->prev, struct page, lru);
+
+		list_del(&page->lru);
+
+		if (rc < (int)PAGE_CACHE_SIZE) {
+			/* zero (remainder of) page */
+			int s = rc < 0 ? 0 : rc;
+			zero_user_segment(page, s, PAGE_CACHE_SIZE);
+		}
+
+		if (add_to_page_cache(page, mapping, page->index, GFP_NOFS)) {
+			page_cache_release(page);
+			dout("readpages %p add_to_page_cache failed %p\n",
+			     inode, page);
+			continue;
+		}
+		dout("readpages %p adding %p idx %lu\n", inode, page,
+		     page->index);
+		flush_dcache_page(page);
+		SetPageUptodate(page);
+		unlock_page(page);
+		if (pagevec_add(&pvec, page) == 0)
+			pagevec_lru_add_file(&pvec);   /* add to lru */
+	}
+	pagevec_lru_add_file(&pvec);
+	rc = 0;
+
+out:
+	kfree(pages);
+	return rc;
+}
+
+/*
+ * Get ref for the oldest snapc for an inode with dirty data... that is, the
+ * only snap context we are allowed to write back.
+ *
+ * Caller holds i_lock.
+ */
+static struct ceph_snap_context *__get_oldest_context(struct inode *inode,
+						      u64 *snap_size)
+{
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	struct ceph_snap_context *snapc = NULL;
+	struct ceph_cap_snap *capsnap = NULL;
+
+	list_for_each_entry(capsnap, &ci->i_cap_snaps, ci_item) {
+		dout(" cap_snap %p snapc %p has %d dirty pages\n", capsnap,
+		     capsnap->context, capsnap->dirty_pages);
+		if (capsnap->dirty_pages) {
+			snapc = ceph_get_snap_context(capsnap->context);
+			if (snap_size)
+				*snap_size = capsnap->size;
+			break;
+		}
+	}
+	if (!snapc && ci->i_snap_realm) {
+		snapc = ceph_get_snap_context(ci->i_snap_realm->cached_context);
+		dout(" head snapc %p has %d dirty pages\n",
+		     snapc, ci->i_wrbuffer_ref_head);
+	}
+	return snapc;
+}
+
+static struct ceph_snap_context *get_oldest_context(struct inode *inode,
+						    u64 *snap_size)
+{
+	struct ceph_snap_context *snapc = NULL;
+
+	spin_lock(&inode->i_lock);
+	snapc = __get_oldest_context(inode, snap_size);
+	spin_unlock(&inode->i_lock);
+	return snapc;
+}
+
+/*
+ * Write a single page, but leave the page locked.
+ *
+ * If we get a write error, set the page error bit, but still adjust the
+ * dirty page accounting (i.e., page is no longer dirty).
+ */
+static int writepage_nounlock(struct page *page, struct writeback_control *wbc)
+{
+	struct inode *inode;
+	struct ceph_inode_info *ci;
+	struct ceph_client *client;
+	struct ceph_osd_client *osdc;
+	loff_t page_off = page->index << PAGE_CACHE_SHIFT;
+	int len = PAGE_CACHE_SIZE;
+	loff_t i_size;
+	int err = 0;
+	struct ceph_snap_context *snapc;
+	u64 snap_size = 0;
+	long writeback_stat;
+
+	dout("writepage %p idx %lu\n", page, page->index);
+
+	if (!page->mapping || !page->mapping->host) {
+		dout("writepage %p - no mapping\n", page);
+		return -EFAULT;
+	}
+	inode = page->mapping->host;
+	ci = ceph_inode(inode);
+	client = ceph_inode_to_client(inode);
+	osdc = &client->osdc;
+
+	/* verify this is a writeable snap context */
+	snapc = (void *)page->private;
+	if (snapc == NULL) {
+		dout("writepage %p page %p not dirty?\n", inode, page);
+		goto out;
+	}
+	if (snapc != get_oldest_context(inode, &snap_size)) {
+		dout("writepage %p page %p snapc %p not writeable - noop\n",
+		     inode, page, (void *)page->private);
+		/* we should only noop if called by kswapd */
+		WARN_ON((current->flags & PF_MEMALLOC) == 0);
+		goto out;
+	}
+
+	/* is this a partial page at end of file? */
+	if (snap_size)
+		i_size = snap_size;
+	else
+		i_size = i_size_read(inode);
+	if (i_size < page_off + len)
+		len = i_size - page_off;
+
+	dout("writepage %p page %p index %lu on %llu~%u\n",
+	     inode, page, page->index, page_off, len);
+
+	writeback_stat = atomic_long_inc_return(&client->writeback_count);
+	if (writeback_stat >
+	    CONGESTION_ON_THRESH(client->mount_args->congestion_kb))
+		set_bdi_congested(&client->backing_dev_info, BLK_RW_ASYNC);
+
+	set_page_writeback(page);
+	err = ceph_osdc_writepages(osdc, ceph_vino(inode),
+				   &ci->i_layout, snapc,
+				   page_off, len,
+				   ci->i_truncate_seq, ci->i_truncate_size,
+				   &inode->i_mtime,
+				   &page, 1, 0, 0, true);
+	if (err < 0) {
+		dout("writepage setting page/mapping error %d %p\n", err, page);
+		SetPageError(page);
+		mapping_set_error(&inode->i_data, err);
+		if (wbc)
+			wbc->pages_skipped++;
+	} else {
+		dout("writepage cleaned page %p\n", page);
+		err = 0;  /* vfs expects us to return 0 */
+	}
+	page->private = 0;
+	ClearPagePrivate(page);
+	end_page_writeback(page);
+	ceph_put_wrbuffer_cap_refs(ci, 1, snapc);
+	ceph_put_snap_context(snapc);
+out:
+	return err;
+}
+
+static int ceph_writepage(struct page *page, struct writeback_control *wbc)
+{
+	int err;
+	struct inode *inode = page->mapping->host;
+	BUG_ON(!inode);
+	igrab(inode);
+	err = writepage_nounlock(page, wbc);
+	unlock_page(page);
+	iput(inode);
+	return err;
+}
+
+
+/*
+ * lame release_pages helper.  release_pages() isn't exported to
+ * modules.
+ */
+static void ceph_release_pages(struct page **pages, int num)
+{
+	struct pagevec pvec;
+	int i;
+
+	pagevec_init(&pvec, 0);
+	for (i = 0; i < num; i++) {
+		if (pagevec_add(&pvec, pages[i]) == 0)
+			pagevec_release(&pvec);
+	}
+	pagevec_release(&pvec);
+}
+
+
+/*
+ * async writeback completion handler.
+ *
+ * If we get an error, set the mapping error bit, but not the individual
+ * page error bits.
+ */
+static void writepages_finish(struct ceph_osd_request *req,
+			      struct ceph_msg *msg)
+{
+	struct inode *inode = req->r_inode;
+	struct ceph_osd_reply_head *replyhead;
+	struct ceph_osd_op *op;
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	unsigned wrote;
+	struct page *page;
+	int i;
+	struct ceph_snap_context *snapc = req->r_snapc;
+	struct address_space *mapping = inode->i_mapping;
+	struct writeback_control *wbc = req->r_wbc;
+	__s32 rc = -EIO;
+	u64 bytes = 0;
+	struct ceph_client *client = ceph_inode_to_client(inode);
+	long writeback_stat;
+	unsigned issued = __ceph_caps_issued(ci, NULL);
+
+	/* parse reply */
+	replyhead = msg->front.iov_base;
+	WARN_ON(le32_to_cpu(replyhead->num_ops) == 0);
+	op = (void *)(replyhead + 1);
+	rc = le32_to_cpu(replyhead->result);
+	bytes = le64_to_cpu(op->extent.length);
+
+	if (rc >= 0) {
+		/*
+		 * Assume we wrote the pages we originally sent.  The
+		 * osd might reply with fewer pages if our writeback
+		 * raced with a truncation and was adjusted at the osd,
+		 * so don't believe the reply.
+		 */
+		wrote = req->r_num_pages;
+	} else {
+		wrote = 0;
+		mapping_set_error(mapping, rc);
+	}
+	dout("writepages_finish %p rc %d bytes %llu wrote %d (pages)\n",
+	     inode, rc, bytes, wrote);
+
+	/* clean all pages */
+	for (i = 0; i < req->r_num_pages; i++) {
+		page = req->r_pages[i];
+		BUG_ON(!page);
+		WARN_ON(!PageUptodate(page));
+
+		writeback_stat =
+			atomic_long_dec_return(&client->writeback_count);
+		if (writeback_stat <
+		    CONGESTION_OFF_THRESH(client->mount_args->congestion_kb))
+			clear_bdi_congested(&client->backing_dev_info,
+					    BLK_RW_ASYNC);
+
+		if (i >= wrote) {
+			dout("inode %p skipping page %p\n", inode, page);
+			wbc->pages_skipped++;
+		}
+		page->private = 0;
+		ClearPagePrivate(page);
+		ceph_put_snap_context(snapc);
+		dout("unlocking %d %p\n", i, page);
+		end_page_writeback(page);
+
+		/*
+		 * We lost the cache cap, need to truncate the page before
+		 * it is unlocked, otherwise we'd truncate it later in the
+		 * page truncation thread, possibly losing some data that
+		 * raced its way in
+		 */
+		if ((issued & CEPH_CAP_FILE_CACHE) == 0)
+			generic_error_remove_page(inode->i_mapping, page);
+
+		unlock_page(page);
+	}
+	dout("%p wrote+cleaned %d pages\n", inode, wrote);
+	ceph_put_wrbuffer_cap_refs(ci, req->r_num_pages, snapc);
+
+	ceph_release_pages(req->r_pages, req->r_num_pages);
+	if (req->r_pages_from_pool)
+		mempool_free(req->r_pages,
+			     ceph_client(inode->i_sb)->wb_pagevec_pool);
+	else
+		kfree(req->r_pages);
+	ceph_osdc_put_request(req);
+}
+
+/*
+ * allocate a page vec, either directly, or if necessary, via a the
+ * mempool.  we avoid the mempool if we can because req->r_num_pages
+ * may be less than the maximum write size.
+ */
+static void alloc_page_vec(struct ceph_client *client,
+			   struct ceph_osd_request *req)
+{
+	req->r_pages = kmalloc(sizeof(struct page *) * req->r_num_pages,
+			       GFP_NOFS);
+	if (!req->r_pages) {
+		req->r_pages = mempool_alloc(client->wb_pagevec_pool, GFP_NOFS);
+		req->r_pages_from_pool = 1;
+		WARN_ON(!req->r_pages);
+	}
+}
+
+/*
+ * initiate async writeback
+ */
+static int ceph_writepages_start(struct address_space *mapping,
+				 struct writeback_control *wbc)
+{
+	struct inode *inode = mapping->host;
+	struct backing_dev_info *bdi = mapping->backing_dev_info;
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	struct ceph_client *client;
+	pgoff_t index, start, end;
+	int range_whole = 0;
+	int should_loop = 1;
+	pgoff_t max_pages = 0, max_pages_ever = 0;
+	struct ceph_snap_context *snapc = NULL, *last_snapc = NULL;
+	struct pagevec pvec;
+	int done = 0;
+	int rc = 0;
+	unsigned wsize = 1 << inode->i_blkbits;
+	struct ceph_osd_request *req = NULL;
+	int do_sync;
+	u64 snap_size = 0;
+
+	/*
+	 * Include a 'sync' in the OSD request if this is a data
+	 * integrity write (e.g., O_SYNC write or fsync()), or if our
+	 * cap is being revoked.
+	 */
+	do_sync = wbc->sync_mode == WB_SYNC_ALL;
+	if (ceph_caps_revoking(ci, CEPH_CAP_FILE_BUFFER))
+		do_sync = 1;
+	dout("writepages_start %p dosync=%d (mode=%s)\n",
+	     inode, do_sync,
+	     wbc->sync_mode == WB_SYNC_NONE ? "NONE" :
+	     (wbc->sync_mode == WB_SYNC_ALL ? "ALL" : "HOLD"));
+
+	client = ceph_inode_to_client(inode);
+	if (client->mount_state == CEPH_MOUNT_SHUTDOWN) {
+		pr_warning("writepage_start %p on forced umount\n", inode);
+		return -EIO; /* we're in a forced umount, don't write! */
+	}
+	if (client->mount_args->wsize && client->mount_args->wsize < wsize)
+		wsize = client->mount_args->wsize;
+	if (wsize < PAGE_CACHE_SIZE)
+		wsize = PAGE_CACHE_SIZE;
+	max_pages_ever = wsize >> PAGE_CACHE_SHIFT;
+
+	pagevec_init(&pvec, 0);
+
+	/* ?? */
+	if (wbc->nonblocking && bdi_write_congested(bdi)) {
+		dout(" writepages congested\n");
+		wbc->encountered_congestion = 1;
+		goto out_final;
+	}
+
+	/* where to start/end? */
+	if (wbc->range_cyclic) {
+		start = mapping->writeback_index; /* Start from prev offset */
+		end = -1;
+		dout(" cyclic, start at %lu\n", start);
+	} else {
+		start = wbc->range_start >> PAGE_CACHE_SHIFT;
+		end = wbc->range_end >> PAGE_CACHE_SHIFT;
+		if (wbc->range_start == 0 && wbc->range_end == LLONG_MAX)
+			range_whole = 1;
+		should_loop = 0;
+		dout(" not cyclic, %lu to %lu\n", start, end);
+	}
+	index = start;
+
+retry:
+	/* find oldest snap context with dirty data */
+	ceph_put_snap_context(snapc);
+	snapc = get_oldest_context(inode, &snap_size);
+	if (!snapc) {
+		/* hmm, why does writepages get called when there
+		   is no dirty data? */
+		dout(" no snap context with dirty data?\n");
+		goto out;
+	}
+	dout(" oldest snapc is %p seq %lld (%d snaps)\n",
+	     snapc, snapc->seq, snapc->num_snaps);
+	if (last_snapc && snapc != last_snapc) {
+		/* if we switched to a newer snapc, restart our scan at the
+		 * start of the original file range. */
+		dout("  snapc differs from last pass, restarting at %lu\n",
+		     index);
+		index = start;
+	}
+	last_snapc = snapc;
+
+	while (!done && index <= end) {
+		unsigned i;
+		int first;
+		pgoff_t next;
+		int pvec_pages, locked_pages;
+		struct page *page;
+		int want;
+		u64 offset, len;
+		struct ceph_osd_request_head *reqhead;
+		struct ceph_osd_op *op;
+		long writeback_stat;
+
+		next = 0;
+		locked_pages = 0;
+		max_pages = max_pages_ever;
+
+get_more_pages:
+		first = -1;
+		want = min(end - index,
+			   min((pgoff_t)PAGEVEC_SIZE,
+			       max_pages - (pgoff_t)locked_pages) - 1)
+			+ 1;
+		pvec_pages = pagevec_lookup_tag(&pvec, mapping, &index,
+						PAGECACHE_TAG_DIRTY,
+						want);
+		dout("pagevec_lookup_tag got %d\n", pvec_pages);
+		if (!pvec_pages && !locked_pages)
+			break;
+		for (i = 0; i < pvec_pages && locked_pages < max_pages; i++) {
+			page = pvec.pages[i];
+			dout("? %p idx %lu\n", page, page->index);
+			if (locked_pages == 0)
+				lock_page(page);  /* first page */
+			else if (!trylock_page(page))
+				break;
+
+			/* only dirty pages, or our accounting breaks */
+			if (unlikely(!PageDirty(page)) ||
+			    unlikely(page->mapping != mapping)) {
+				dout("!dirty or !mapping %p\n", page);
+				unlock_page(page);
+				break;
+			}
+			if (!wbc->range_cyclic && page->index > end) {
+				dout("end of range %p\n", page);
+				done = 1;
+				unlock_page(page);
+				break;
+			}
+			if (next && (page->index != next)) {
+				dout("not consecutive %p\n", page);
+				unlock_page(page);
+				break;
+			}
+			if (wbc->sync_mode != WB_SYNC_NONE) {
+				dout("waiting on writeback %p\n", page);
+				wait_on_page_writeback(page);
+			}
+			if ((snap_size && page_offset(page) > snap_size) ||
+			    (!snap_size &&
+			     page_offset(page) > i_size_read(inode))) {
+				dout("%p page eof %llu\n", page, snap_size ?
+				     snap_size : i_size_read(inode));
+				done = 1;
+				unlock_page(page);
+				break;
+			}
+			if (PageWriteback(page)) {
+				dout("%p under writeback\n", page);
+				unlock_page(page);
+				break;
+			}
+
+			/* only if matching snap context */
+			if (snapc != (void *)page->private) {
+				dout("page snapc %p != oldest %p\n",
+				     (void *)page->private, snapc);
+				unlock_page(page);
+				if (!locked_pages)
+					continue; /* keep looking for snap */
+				break;
+			}
+
+			if (!clear_page_dirty_for_io(page)) {
+				dout("%p !clear_page_dirty_for_io\n", page);
+				unlock_page(page);
+				break;
+			}
+
+			/* ok */
+			if (locked_pages == 0) {
+				/* prepare async write request */
+				offset = page->index << PAGE_CACHE_SHIFT;
+				len = wsize;
+				req = ceph_osdc_new_request(&client->osdc,
+					    &ci->i_layout,
+					    ceph_vino(inode),
+					    offset, &len,
+					    CEPH_OSD_OP_WRITE,
+					    CEPH_OSD_FLAG_WRITE |
+						    CEPH_OSD_FLAG_ONDISK,
+					    snapc, do_sync,
+					    ci->i_truncate_seq,
+					    ci->i_truncate_size,
+					    &inode->i_mtime, true, 1);
+				max_pages = req->r_num_pages;
+
+				alloc_page_vec(client, req);
+				req->r_callback = writepages_finish;
+				req->r_inode = inode;
+				req->r_wbc = wbc;
+			}
+
+			/* note position of first page in pvec */
+			if (first < 0)
+				first = i;
+			dout("%p will write page %p idx %lu\n",
+			     inode, page, page->index);
+
+			writeback_stat = atomic_long_inc_return(&client->writeback_count);
+			if (writeback_stat > CONGESTION_ON_THRESH(client->mount_args->congestion_kb)) {
+				set_bdi_congested(&client->backing_dev_info, BLK_RW_ASYNC);
+			}
+
+			set_page_writeback(page);
+			req->r_pages[locked_pages] = page;
+			locked_pages++;
+			next = page->index + 1;
+		}
+
+		/* did we get anything? */
+		if (!locked_pages)
+			goto release_pvec_pages;
+		if (i) {
+			int j;
+			BUG_ON(!locked_pages || first < 0);
+
+			if (pvec_pages && i == pvec_pages &&
+			    locked_pages < max_pages) {
+				dout("reached end pvec, trying for more\n");
+				pagevec_reinit(&pvec);
+				goto get_more_pages;
+			}
+
+			/* shift unused pages over in the pvec...  we
+			 * will need to release them below. */
+			for (j = i; j < pvec_pages; j++) {
+				dout(" pvec leftover page %p\n",
+				     pvec.pages[j]);
+				pvec.pages[j-i+first] = pvec.pages[j];
+			}
+			pvec.nr -= i-first;
+		}
+
+		/* submit the write */
+		offset = req->r_pages[0]->index << PAGE_CACHE_SHIFT;
+		len = min((snap_size ? snap_size : i_size_read(inode)) - offset,
+			  (u64)locked_pages << PAGE_CACHE_SHIFT);
+		dout("writepages got %d pages at %llu~%llu\n",
+		     locked_pages, offset, len);
+
+		/* revise final length, page count */
+		req->r_num_pages = locked_pages;
+		reqhead = req->r_request->front.iov_base;
+		op = (void *)(reqhead + 1);
+		op->extent.length = cpu_to_le64(len);
+		op->payload_len = cpu_to_le32(len);
+		req->r_request->hdr.data_len = cpu_to_le32(len);
+
+		ceph_osdc_start_request(&client->osdc, req, true);
+		req = NULL;
+
+		/* continue? */
+		index = next;
+		wbc->nr_to_write -= locked_pages;
+		if (wbc->nr_to_write <= 0)
+			done = 1;
+
+release_pvec_pages:
+		dout("pagevec_release on %d pages (%p)\n", (int)pvec.nr,
+		     pvec.nr ? pvec.pages[0] : NULL);
+		pagevec_release(&pvec);
+
+		if (locked_pages && !done)
+			goto retry;
+	}
+
+	if (should_loop && !done) {
+		/* more to do; loop back to beginning of file */
+		dout("writepages looping back to beginning of file\n");
+		should_loop = 0;
+		index = 0;
+		goto retry;
+	}
+
+	if (wbc->range_cyclic || (range_whole && wbc->nr_to_write > 0))
+		mapping->writeback_index = index;
+
+out:
+	if (req)
+		ceph_osdc_put_request(req);
+	if (rc > 0)
+		rc = 0;  /* vfs expects us to return 0 */
+	ceph_put_snap_context(snapc);
+	dout("writepages done, rc = %d\n", rc);
+out_final:
+	return rc;
+}
+
+
+
+/*
+ * See if a given @snapc is either writeable, or already written.
+ */
+static int context_is_writeable_or_written(struct inode *inode,
+					   struct ceph_snap_context *snapc)
+{
+	struct ceph_snap_context *oldest = get_oldest_context(inode, NULL);
+	return !oldest || snapc->seq <= oldest->seq;
+}
+
+/*
+ * We are only allowed to write into/dirty the page if the page is
+ * clean, or already dirty within the same snap context.
+ */
+static int ceph_update_writeable_page(struct file *file,
+			    loff_t pos, unsigned len,
+			    struct page *page)
+{
+	struct inode *inode = file->f_dentry->d_inode;
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	struct ceph_mds_client *mdsc = &ceph_inode_to_client(inode)->mdsc;
+	loff_t page_off = pos & PAGE_CACHE_MASK;
+	int pos_in_page = pos & ~PAGE_CACHE_MASK;
+	int end_in_page = pos_in_page + len;
+	loff_t i_size;
+	struct ceph_snap_context *snapc;
+	int r;
+
+retry_locked:
+	/* writepages currently holds page lock, but if we change that later, */
+	wait_on_page_writeback(page);
+
+	/* check snap context */
+	BUG_ON(!ci->i_snap_realm);
+	down_read(&mdsc->snap_rwsem);
+	BUG_ON(!ci->i_snap_realm->cached_context);
+	if (page->private &&
+	    (void *)page->private != ci->i_snap_realm->cached_context) {
+		/*
+		 * this page is already dirty in another (older) snap
+		 * context!  is it writeable now?
+		 */
+		snapc = get_oldest_context(inode, NULL);
+		up_read(&mdsc->snap_rwsem);
+
+		if (snapc != (void *)page->private) {
+			dout(" page %p snapc %p not current or oldest\n",
+			     page, (void *)page->private);
+			/*
+			 * queue for writeback, and wait for snapc to
+			 * be writeable or written
+			 */
+			snapc = ceph_get_snap_context((void *)page->private);
+			unlock_page(page);
+			ceph_queue_writeback(inode);
+			wait_event_interruptible(ci->i_cap_wq,
+			       context_is_writeable_or_written(inode, snapc));
+			ceph_put_snap_context(snapc);
+			return -EAGAIN;
+		}
+
+		/* yay, writeable, do it now (without dropping page lock) */
+		dout(" page %p snapc %p not current, but oldest\n",
+		     page, snapc);
+		if (!clear_page_dirty_for_io(page))
+			goto retry_locked;
+		r = writepage_nounlock(page, NULL);
+		if (r < 0)
+			goto fail_nosnap;
+		goto retry_locked;
+	}
+
+	if (PageUptodate(page)) {
+		dout(" page %p already uptodate\n", page);
+		return 0;
+	}
+
+	/* full page? */
+	if (pos_in_page == 0 && len == PAGE_CACHE_SIZE)
+		return 0;
+
+	/* past end of file? */
+	i_size = inode->i_size;   /* caller holds i_mutex */
+
+	if (i_size + len > inode->i_sb->s_maxbytes) {
+		/* file is too big */
+		r = -EINVAL;
+		goto fail;
+	}
+
+	if (page_off >= i_size ||
+	    (pos_in_page == 0 && (pos+len) >= i_size &&
+	     end_in_page - pos_in_page != PAGE_CACHE_SIZE)) {
+		dout(" zeroing %p 0 - %d and %d - %d\n",
+		     page, pos_in_page, end_in_page, (int)PAGE_CACHE_SIZE);
+		zero_user_segments(page,
+				   0, pos_in_page,
+				   end_in_page, PAGE_CACHE_SIZE);
+		return 0;
+	}
+
+	/* we need to read it. */
+	up_read(&mdsc->snap_rwsem);
+	r = readpage_nounlock(file, page);
+	if (r < 0)
+		goto fail_nosnap;
+	goto retry_locked;
+
+fail:
+	up_read(&mdsc->snap_rwsem);
+fail_nosnap:
+	unlock_page(page);
+	return r;
+}
+
+/*
+ * We are only allowed to write into/dirty the page if the page is
+ * clean, or already dirty within the same snap context.
+ */
+static int ceph_write_begin(struct file *file, struct address_space *mapping,
+			    loff_t pos, unsigned len, unsigned flags,
+			    struct page **pagep, void **fsdata)
+{
+	struct inode *inode = file->f_dentry->d_inode;
+	struct page *page;
+	pgoff_t index = pos >> PAGE_CACHE_SHIFT;
+	int r;
+
+	do {
+		/* get a page*/
+		page = grab_cache_page_write_begin(mapping, index, 0);
+		if (!page)
+			return -ENOMEM;
+		*pagep = page;
+
+		dout("write_begin file %p inode %p page %p %d~%d\n", file,
+	     	inode, page, (int)pos, (int)len);
+
+		r = ceph_update_writeable_page(file, pos, len, page);
+	} while (r == -EAGAIN);
+
+	return r;
+}
+
+/*
+ * we don't do anything in here that simple_write_end doesn't do
+ * except adjust dirty page accounting and drop read lock on
+ * mdsc->snap_rwsem.
+ */
+static int ceph_write_end(struct file *file, struct address_space *mapping,
+			  loff_t pos, unsigned len, unsigned copied,
+			  struct page *page, void *fsdata)
+{
+	struct inode *inode = file->f_dentry->d_inode;
+	struct ceph_client *client = ceph_inode_to_client(inode);
+	struct ceph_mds_client *mdsc = &client->mdsc;
+	unsigned from = pos & (PAGE_CACHE_SIZE - 1);
+	int check_cap = 0;
+
+	dout("write_end file %p inode %p page %p %d~%d (%d)\n", file,
+	     inode, page, (int)pos, (int)copied, (int)len);
+
+	/* zero the stale part of the page if we did a short copy */
+	if (copied < len)
+		zero_user_segment(page, from+copied, len);
+
+	/* did file size increase? */
+	/* (no need for i_size_read(); we caller holds i_mutex */
+	if (pos+copied > inode->i_size)
+		check_cap = ceph_inode_set_size(inode, pos+copied);
+
+	if (!PageUptodate(page))
+		SetPageUptodate(page);
+
+	set_page_dirty(page);
+
+	unlock_page(page);
+	up_read(&mdsc->snap_rwsem);
+	page_cache_release(page);
+
+	if (check_cap)
+		ceph_check_caps(ceph_inode(inode), CHECK_CAPS_AUTHONLY, NULL);
+
+	return copied;
+}
+
+/*
+ * we set .direct_IO to indicate direct io is supported, but since we
+ * intercept O_DIRECT reads and writes early, this function should
+ * never get called.
+ */
+static ssize_t ceph_direct_io(int rw, struct kiocb *iocb,
+			      const struct iovec *iov,
+			      loff_t pos, unsigned long nr_segs)
+{
+	WARN_ON(1);
+	return -EINVAL;
+}
+
+const struct address_space_operations ceph_aops = {
+	.readpage = ceph_readpage,
+	.readpages = ceph_readpages,
+	.writepage = ceph_writepage,
+	.writepages = ceph_writepages_start,
+	.write_begin = ceph_write_begin,
+	.write_end = ceph_write_end,
+	.set_page_dirty = ceph_set_page_dirty,
+	.invalidatepage = ceph_invalidatepage,
+	.releasepage = ceph_releasepage,
+	.direct_IO = ceph_direct_io,
+};
+
+
+/*
+ * vm ops
+ */
+
+/*
+ * Reuse write_begin here for simplicity.
+ */
+static int ceph_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf)
+{
+	struct inode *inode = vma->vm_file->f_dentry->d_inode;
+	struct page *page = vmf->page;
+	struct ceph_mds_client *mdsc = &ceph_inode_to_client(inode)->mdsc;
+	loff_t off = page->index << PAGE_CACHE_SHIFT;
+	loff_t size, len;
+	int ret;
+
+	size = i_size_read(inode);
+	if (off + PAGE_CACHE_SIZE <= size)
+		len = PAGE_CACHE_SIZE;
+	else
+		len = size & ~PAGE_CACHE_MASK;
+
+	dout("page_mkwrite %p %llu~%llu page %p idx %lu\n", inode,
+	     off, len, page, page->index);
+
+	lock_page(page);
+
+	ret = VM_FAULT_NOPAGE;
+	if ((off > size) ||
+	    (page->mapping != inode->i_mapping))
+		goto out;
+
+	ret = ceph_update_writeable_page(vma->vm_file, off, len, page);
+	if (ret == 0) {
+		/* success.  we'll keep the page locked. */
+		set_page_dirty(page);
+		up_read(&mdsc->snap_rwsem);
+		ret = VM_FAULT_LOCKED;
+	} else {
+		if (ret == -ENOMEM)
+			ret = VM_FAULT_OOM;
+		else
+			ret = VM_FAULT_SIGBUS;
+	}
+out:
+	dout("page_mkwrite %p %llu~%llu = %d\n", inode, off, len, ret);
+	if (ret != VM_FAULT_LOCKED)
+		unlock_page(page);
+	return ret;
+}
+
+static struct vm_operations_struct ceph_vmops = {
+	.fault		= filemap_fault,
+	.page_mkwrite	= ceph_page_mkwrite,
+};
+
+int ceph_mmap(struct file *file, struct vm_area_struct *vma)
+{
+	struct address_space *mapping = file->f_mapping;
+
+	if (!mapping->a_ops->readpage)
+		return -ENOEXEC;
+	file_accessed(file);
+	vma->vm_ops = &ceph_vmops;
+	vma->vm_flags |= VM_CAN_NONLINEAR;
+	return 0;
+}
diff --git a/fs/ceph/armor.c b/fs/ceph/armor.c
new file mode 100644
index 000000000000..67b2c030924b
--- /dev/null
+++ b/fs/ceph/armor.c
@@ -0,0 +1,99 @@
+
+#include <linux/errno.h>
+
+/*
+ * base64 encode/decode.
+ */
+
+const char *pem_key = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/";
+
+static int encode_bits(int c)
+{
+	return pem_key[c];
+}
+
+static int decode_bits(char c)
+{
+	if (c >= 'A' && c <= 'Z')
+		return c - 'A';
+	if (c >= 'a' && c <= 'z')
+		return c - 'a' + 26;
+	if (c >= '0' && c <= '9')
+		return c - '0' + 52;
+	if (c == '+')
+		return 62;
+	if (c == '/')
+		return 63;
+	if (c == '=')
+		return 0; /* just non-negative, please */
+	return -EINVAL;
+}
+
+int ceph_armor(char *dst, const char *src, const char *end)
+{
+	int olen = 0;
+	int line = 0;
+
+	while (src < end) {
+		unsigned char a, b, c;
+
+		a = *src++;
+		*dst++ = encode_bits(a >> 2);
+		if (src < end) {
+			b = *src++;
+			*dst++ = encode_bits(((a & 3) << 4) | (b >> 4));
+			if (src < end) {
+				c = *src++;
+				*dst++ = encode_bits(((b & 15) << 2) |
+						     (c >> 6));
+				*dst++ = encode_bits(c & 63);
+			} else {
+				*dst++ = encode_bits((b & 15) << 2);
+				*dst++ = '=';
+			}
+		} else {
+			*dst++ = encode_bits(((a & 3) << 4));
+			*dst++ = '=';
+			*dst++ = '=';
+		}
+		olen += 4;
+		line += 4;
+		if (line == 64) {
+			line = 0;
+			*(dst++) = '\n';
+			olen++;
+		}
+	}
+	return olen;
+}
+
+int ceph_unarmor(char *dst, const char *src, const char *end)
+{
+	int olen = 0;
+
+	while (src < end) {
+		int a, b, c, d;
+
+		if (src < end && src[0] == '\n')
+			src++;
+		if (src + 4 > end)
+			return -EINVAL;
+		a = decode_bits(src[0]);
+		b = decode_bits(src[1]);
+		c = decode_bits(src[2]);
+		d = decode_bits(src[3]);
+		if (a < 0 || b < 0 || c < 0 || d < 0)
+			return -EINVAL;
+
+		*dst++ = (a << 2) | (b >> 4);
+		if (src[2] == '=')
+			return olen + 1;
+		*dst++ = ((b & 15) << 4) | (c >> 2);
+		if (src[3] == '=')
+			return olen + 2;
+		*dst++ = ((c & 3) << 6) | d;
+		olen += 3;
+		src += 4;
+	}
+	return olen;
+}
diff --git a/fs/ceph/auth.c b/fs/ceph/auth.c
new file mode 100644
index 000000000000..abb204fea6c7
--- /dev/null
+++ b/fs/ceph/auth.c
@@ -0,0 +1,257 @@
+#include "ceph_debug.h"
+
+#include <linux/module.h>
+#include <linux/err.h>
+
+#include "types.h"
+#include "auth_none.h"
+#include "auth_x.h"
+#include "decode.h"
+#include "super.h"
+
+#include "messenger.h"
+
+/*
+ * get protocol handler
+ */
+static u32 supported_protocols[] = {
+	CEPH_AUTH_NONE,
+	CEPH_AUTH_CEPHX
+};
+
+int ceph_auth_init_protocol(struct ceph_auth_client *ac, int protocol)
+{
+	switch (protocol) {
+	case CEPH_AUTH_NONE:
+		return ceph_auth_none_init(ac);
+	case CEPH_AUTH_CEPHX:
+		return ceph_x_init(ac);
+	default:
+		return -ENOENT;
+	}
+}
+
+/*
+ * setup, teardown.
+ */
+struct ceph_auth_client *ceph_auth_init(const char *name, const char *secret)
+{
+	struct ceph_auth_client *ac;
+	int ret;
+
+	dout("auth_init name '%s' secret '%s'\n", name, secret);
+
+	ret = -ENOMEM;
+	ac = kzalloc(sizeof(*ac), GFP_NOFS);
+	if (!ac)
+		goto out;
+
+	ac->negotiating = true;
+	if (name)
+		ac->name = name;
+	else
+		ac->name = CEPH_AUTH_NAME_DEFAULT;
+	dout("auth_init name %s secret %s\n", ac->name, secret);
+	ac->secret = secret;
+	return ac;
+
+out:
+	return ERR_PTR(ret);
+}
+
+void ceph_auth_destroy(struct ceph_auth_client *ac)
+{
+	dout("auth_destroy %p\n", ac);
+	if (ac->ops)
+		ac->ops->destroy(ac);
+	kfree(ac);
+}
+
+/*
+ * Reset occurs when reconnecting to the monitor.
+ */
+void ceph_auth_reset(struct ceph_auth_client *ac)
+{
+	dout("auth_reset %p\n", ac);
+	if (ac->ops && !ac->negotiating)
+		ac->ops->reset(ac);
+	ac->negotiating = true;
+}
+
+int ceph_entity_name_encode(const char *name, void **p, void *end)
+{
+	int len = strlen(name);
+
+	if (*p + 2*sizeof(u32) + len > end)
+		return -ERANGE;
+	ceph_encode_32(p, CEPH_ENTITY_TYPE_CLIENT);
+	ceph_encode_32(p, len);
+	ceph_encode_copy(p, name, len);
+	return 0;
+}
+
+/*
+ * Initiate protocol negotiation with monitor.  Include entity name
+ * and list supported protocols.
+ */
+int ceph_auth_build_hello(struct ceph_auth_client *ac, void *buf, size_t len)
+{
+	struct ceph_mon_request_header *monhdr = buf;
+	void *p = monhdr + 1, *end = buf + len, *lenp;
+	int i, num;
+	int ret;
+
+	dout("auth_build_hello\n");
+	monhdr->have_version = 0;
+	monhdr->session_mon = cpu_to_le16(-1);
+	monhdr->session_mon_tid = 0;
+
+	ceph_encode_32(&p, 0);  /* no protocol, yet */
+
+	lenp = p;
+	p += sizeof(u32);
+
+	ceph_decode_need(&p, end, 1 + sizeof(u32), bad);
+	ceph_encode_8(&p, 1);
+	num = ARRAY_SIZE(supported_protocols);
+	ceph_encode_32(&p, num);
+	ceph_decode_need(&p, end, num * sizeof(u32), bad);
+	for (i = 0; i < num; i++)
+		ceph_encode_32(&p, supported_protocols[i]);
+
+	ret = ceph_entity_name_encode(ac->name, &p, end);
+	if (ret < 0)
+		return ret;
+	ceph_decode_need(&p, end, sizeof(u64), bad);
+	ceph_encode_64(&p, ac->global_id);
+
+	ceph_encode_32(&lenp, p - lenp - sizeof(u32));
+	return p - buf;
+
+bad:
+	return -ERANGE;
+}
+
+int ceph_build_auth_request(struct ceph_auth_client *ac,
+			   void *msg_buf, size_t msg_len)
+{
+	struct ceph_mon_request_header *monhdr = msg_buf;
+	void *p = monhdr + 1;
+	void *end = msg_buf + msg_len;
+	int ret;
+
+	monhdr->have_version = 0;
+	monhdr->session_mon = cpu_to_le16(-1);
+	monhdr->session_mon_tid = 0;
+
+	ceph_encode_32(&p, ac->protocol);
+
+	ret = ac->ops->build_request(ac, p + sizeof(u32), end);
+	if (ret < 0) {
+		pr_err("error %d building request\n", ret);
+		return ret;
+	}
+	dout(" built request %d bytes\n", ret);
+	ceph_encode_32(&p, ret);
+	return p + ret - msg_buf;
+}
+
+/*
+ * Handle auth message from monitor.
+ */
+int ceph_handle_auth_reply(struct ceph_auth_client *ac,
+			   void *buf, size_t len,
+			   void *reply_buf, size_t reply_len)
+{
+	void *p = buf;
+	void *end = buf + len;
+	int protocol;
+	s32 result;
+	u64 global_id;
+	void *payload, *payload_end;
+	int payload_len;
+	char *result_msg;
+	int result_msg_len;
+	int ret = -EINVAL;
+
+	dout("handle_auth_reply %p %p\n", p, end);
+	ceph_decode_need(&p, end, sizeof(u32) * 3 + sizeof(u64), bad);
+	protocol = ceph_decode_32(&p);
+	result = ceph_decode_32(&p);
+	global_id = ceph_decode_64(&p);
+	payload_len = ceph_decode_32(&p);
+	payload = p;
+	p += payload_len;
+	ceph_decode_need(&p, end, sizeof(u32), bad);
+	result_msg_len = ceph_decode_32(&p);
+	result_msg = p;
+	p += result_msg_len;
+	if (p != end)
+		goto bad;
+
+	dout(" result %d '%.*s' gid %llu len %d\n", result, result_msg_len,
+	     result_msg, global_id, payload_len);
+
+	payload_end = payload + payload_len;
+
+	if (global_id && ac->global_id != global_id) {
+		dout(" set global_id %lld -> %lld\n", ac->global_id, global_id);
+		ac->global_id = global_id;
+	}
+
+	if (ac->negotiating) {
+		/* server does not support our protocols? */
+		if (!protocol && result < 0) {
+			ret = result;
+			goto out;
+		}
+		/* set up (new) protocol handler? */
+		if (ac->protocol && ac->protocol != protocol) {
+			ac->ops->destroy(ac);
+			ac->protocol = 0;
+			ac->ops = NULL;
+		}
+		if (ac->protocol != protocol) {
+			ret = ceph_auth_init_protocol(ac, protocol);
+			if (ret) {
+				pr_err("error %d on auth protocol %d init\n",
+				       ret, protocol);
+				goto out;
+			}
+		}
+
+		ac->negotiating = false;
+	}
+
+	ret = ac->ops->handle_reply(ac, result, payload, payload_end);
+	if (ret == -EAGAIN) {
+		return ceph_build_auth_request(ac, reply_buf, reply_len);
+	} else if (ret) {
+		pr_err("authentication error %d\n", ret);
+		return ret;
+	}
+	return 0;
+
+bad:
+	pr_err("failed to decode auth msg\n");
+out:
+	return ret;
+}
+
+int ceph_build_auth(struct ceph_auth_client *ac,
+		    void *msg_buf, size_t msg_len)
+{
+	if (!ac->protocol)
+		return ceph_auth_build_hello(ac, msg_buf, msg_len);
+	BUG_ON(!ac->ops);
+	if (!ac->ops->is_authenticated(ac))
+		return ceph_build_auth_request(ac, msg_buf, msg_len);
+	return 0;
+}
+
+int ceph_auth_is_authenticated(struct ceph_auth_client *ac)
+{
+	if (!ac->ops)
+		return 0;
+	return ac->ops->is_authenticated(ac);
+}
diff --git a/fs/ceph/auth.h b/fs/ceph/auth.h
new file mode 100644
index 000000000000..ca4f57cfb267
--- /dev/null
+++ b/fs/ceph/auth.h
@@ -0,0 +1,84 @@
+#ifndef _FS_CEPH_AUTH_H
+#define _FS_CEPH_AUTH_H
+
+#include "types.h"
+#include "buffer.h"
+
+/*
+ * Abstract interface for communicating with the authenticate module.
+ * There is some handshake that takes place between us and the monitor
+ * to acquire the necessary keys.  These are used to generate an
+ * 'authorizer' that we use when connecting to a service (mds, osd).
+ */
+
+struct ceph_auth_client;
+struct ceph_authorizer;
+
+struct ceph_auth_client_ops {
+	/*
+	 * true if we are authenticated and can connect to
+	 * services.
+	 */
+	int (*is_authenticated)(struct ceph_auth_client *ac);
+
+	/*
+	 * build requests and process replies during monitor
+	 * handshake.  if handle_reply returns -EAGAIN, we build
+	 * another request.
+	 */
+	int (*build_request)(struct ceph_auth_client *ac, void *buf, void *end);
+	int (*handle_reply)(struct ceph_auth_client *ac, int result,
+			    void *buf, void *end);
+
+	/*
+	 * Create authorizer for connecting to a service, and verify
+	 * the response to authenticate the service.
+	 */
+	int (*create_authorizer)(struct ceph_auth_client *ac, int peer_type,
+				 struct ceph_authorizer **a,
+				 void **buf, size_t *len,
+				 void **reply_buf, size_t *reply_len);
+	int (*verify_authorizer_reply)(struct ceph_auth_client *ac,
+				       struct ceph_authorizer *a, size_t len);
+	void (*destroy_authorizer)(struct ceph_auth_client *ac,
+				   struct ceph_authorizer *a);
+	void (*invalidate_authorizer)(struct ceph_auth_client *ac,
+				      int peer_type);
+
+	/* reset when we (re)connect to a monitor */
+	void (*reset)(struct ceph_auth_client *ac);
+
+	void (*destroy)(struct ceph_auth_client *ac);
+};
+
+struct ceph_auth_client {
+	u32 protocol;           /* CEPH_AUTH_* */
+	void *private;          /* for use by protocol implementation */
+	const struct ceph_auth_client_ops *ops;  /* null iff protocol==0 */
+
+	bool negotiating;       /* true if negotiating protocol */
+	const char *name;       /* entity name */
+	u64 global_id;          /* our unique id in system */
+	const char *secret;     /* our secret key */
+	unsigned want_keys;     /* which services we want */
+};
+
+extern struct ceph_auth_client *ceph_auth_init(const char *name,
+					       const char *secret);
+extern void ceph_auth_destroy(struct ceph_auth_client *ac);
+
+extern void ceph_auth_reset(struct ceph_auth_client *ac);
+
+extern int ceph_auth_build_hello(struct ceph_auth_client *ac,
+				 void *buf, size_t len);
+extern int ceph_handle_auth_reply(struct ceph_auth_client *ac,
+				  void *buf, size_t len,
+				  void *reply_buf, size_t reply_len);
+extern int ceph_entity_name_encode(const char *name, void **p, void *end);
+
+extern int ceph_build_auth(struct ceph_auth_client *ac,
+		    void *msg_buf, size_t msg_len);
+
+extern int ceph_auth_is_authenticated(struct ceph_auth_client *ac);
+
+#endif
diff --git a/fs/ceph/auth_none.c b/fs/ceph/auth_none.c
new file mode 100644
index 000000000000..b4ef6f0a6c85
--- /dev/null
+++ b/fs/ceph/auth_none.c
@@ -0,0 +1,121 @@
+
+#include "ceph_debug.h"
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/random.h>
+
+#include "auth_none.h"
+#include "auth.h"
+#include "decode.h"
+
+static void reset(struct ceph_auth_client *ac)
+{
+	struct ceph_auth_none_info *xi = ac->private;
+
+	xi->starting = true;
+	xi->built_authorizer = false;
+}
+
+static void destroy(struct ceph_auth_client *ac)
+{
+	kfree(ac->private);
+	ac->private = NULL;
+}
+
+static int is_authenticated(struct ceph_auth_client *ac)
+{
+	struct ceph_auth_none_info *xi = ac->private;
+
+	return !xi->starting;
+}
+
+/*
+ * the generic auth code decode the global_id, and we carry no actual
+ * authenticate state, so nothing happens here.
+ */
+static int handle_reply(struct ceph_auth_client *ac, int result,
+			void *buf, void *end)
+{
+	struct ceph_auth_none_info *xi = ac->private;
+
+	xi->starting = false;
+	return result;
+}
+
+/*
+ * build an 'authorizer' with our entity_name and global_id.  we can
+ * reuse a single static copy since it is identical for all services
+ * we connect to.
+ */
+static int ceph_auth_none_create_authorizer(
+	struct ceph_auth_client *ac, int peer_type,
+	struct ceph_authorizer **a,
+	void **buf, size_t *len,
+	void **reply_buf, size_t *reply_len)
+{
+	struct ceph_auth_none_info *ai = ac->private;
+	struct ceph_none_authorizer *au = &ai->au;
+	void *p, *end;
+	int ret;
+
+	if (!ai->built_authorizer) {
+		p = au->buf;
+		end = p + sizeof(au->buf);
+		ceph_encode_8(&p, 1);
+		ret = ceph_entity_name_encode(ac->name, &p, end - 8);
+		if (ret < 0)
+			goto bad;
+		ceph_decode_need(&p, end, sizeof(u64), bad2);
+		ceph_encode_64(&p, ac->global_id);
+		au->buf_len = p - (void *)au->buf;
+		ai->built_authorizer = true;
+		dout("built authorizer len %d\n", au->buf_len);
+	}
+
+	*a = (struct ceph_authorizer *)au;
+	*buf = au->buf;
+	*len = au->buf_len;
+	*reply_buf = au->reply_buf;
+	*reply_len = sizeof(au->reply_buf);
+	return 0;
+
+bad2:
+	ret = -ERANGE;
+bad:
+	return ret;
+}
+
+static void ceph_auth_none_destroy_authorizer(struct ceph_auth_client *ac,
+				      struct ceph_authorizer *a)
+{
+	/* nothing to do */
+}
+
+static const struct ceph_auth_client_ops ceph_auth_none_ops = {
+	.reset = reset,
+	.destroy = destroy,
+	.is_authenticated = is_authenticated,
+	.handle_reply = handle_reply,
+	.create_authorizer = ceph_auth_none_create_authorizer,
+	.destroy_authorizer = ceph_auth_none_destroy_authorizer,
+};
+
+int ceph_auth_none_init(struct ceph_auth_client *ac)
+{
+	struct ceph_auth_none_info *xi;
+
+	dout("ceph_auth_none_init %p\n", ac);
+	xi = kzalloc(sizeof(*xi), GFP_NOFS);
+	if (!xi)
+		return -ENOMEM;
+
+	xi->starting = true;
+	xi->built_authorizer = false;
+
+	ac->protocol = CEPH_AUTH_NONE;
+	ac->private = xi;
+	ac->ops = &ceph_auth_none_ops;
+	return 0;
+}
+
diff --git a/fs/ceph/auth_none.h b/fs/ceph/auth_none.h
new file mode 100644
index 000000000000..56c05533a31c
--- /dev/null
+++ b/fs/ceph/auth_none.h
@@ -0,0 +1,28 @@
+#ifndef _FS_CEPH_AUTH_NONE_H
+#define _FS_CEPH_AUTH_NONE_H
+
+#include "auth.h"
+
+/*
+ * null security mode.
+ *
+ * we use a single static authorizer that simply encodes our entity name
+ * and global id.
+ */
+
+struct ceph_none_authorizer {
+	char buf[128];
+	int buf_len;
+	char reply_buf[0];
+};
+
+struct ceph_auth_none_info {
+	bool starting;
+	bool built_authorizer;
+	struct ceph_none_authorizer au;   /* we only need one; it's static */
+};
+
+extern int ceph_auth_none_init(struct ceph_auth_client *ac);
+
+#endif
+
diff --git a/fs/ceph/auth_x.c b/fs/ceph/auth_x.c
new file mode 100644
index 000000000000..f0318427b6da
--- /dev/null
+++ b/fs/ceph/auth_x.c
@@ -0,0 +1,656 @@
+
+#include "ceph_debug.h"
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/random.h>
+
+#include "auth_x.h"
+#include "auth_x_protocol.h"
+#include "crypto.h"
+#include "auth.h"
+#include "decode.h"
+
+struct kmem_cache *ceph_x_ticketbuf_cachep;
+
+#define TEMP_TICKET_BUF_LEN	256
+
+static void ceph_x_validate_tickets(struct ceph_auth_client *ac, int *pneed);
+
+static int ceph_x_is_authenticated(struct ceph_auth_client *ac)
+{
+	struct ceph_x_info *xi = ac->private;
+	int need;
+
+	ceph_x_validate_tickets(ac, &need);
+	dout("ceph_x_is_authenticated want=%d need=%d have=%d\n",
+	     ac->want_keys, need, xi->have_keys);
+	return (ac->want_keys & xi->have_keys) == ac->want_keys;
+}
+
+static int ceph_x_encrypt(struct ceph_crypto_key *secret,
+			  void *ibuf, int ilen, void *obuf, size_t olen)
+{
+	struct ceph_x_encrypt_header head = {
+		.struct_v = 1,
+		.magic = cpu_to_le64(CEPHX_ENC_MAGIC)
+	};
+	size_t len = olen - sizeof(u32);
+	int ret;
+
+	ret = ceph_encrypt2(secret, obuf + sizeof(u32), &len,
+			    &head, sizeof(head), ibuf, ilen);
+	if (ret)
+		return ret;
+	ceph_encode_32(&obuf, len);
+	return len + sizeof(u32);
+}
+
+static int ceph_x_decrypt(struct ceph_crypto_key *secret,
+			  void **p, void *end, void *obuf, size_t olen)
+{
+	struct ceph_x_encrypt_header head;
+	size_t head_len = sizeof(head);
+	int len, ret;
+
+	len = ceph_decode_32(p);
+	if (*p + len > end)
+		return -EINVAL;
+
+	dout("ceph_x_decrypt len %d\n", len);
+	ret = ceph_decrypt2(secret, &head, &head_len, obuf, &olen,
+			    *p, len);
+	if (ret)
+		return ret;
+	if (head.struct_v != 1 || le64_to_cpu(head.magic) != CEPHX_ENC_MAGIC)
+		return -EPERM;
+	*p += len;
+	return olen;
+}
+
+/*
+ * get existing (or insert new) ticket handler
+ */
+struct ceph_x_ticket_handler *get_ticket_handler(struct ceph_auth_client *ac,
+						 int service)
+{
+	struct ceph_x_ticket_handler *th;
+	struct ceph_x_info *xi = ac->private;
+	struct rb_node *parent = NULL, **p = &xi->ticket_handlers.rb_node;
+
+	while (*p) {
+		parent = *p;
+		th = rb_entry(parent, struct ceph_x_ticket_handler, node);
+		if (service < th->service)
+			p = &(*p)->rb_left;
+		else if (service > th->service)
+			p = &(*p)->rb_right;
+		else
+			return th;
+	}
+
+	/* add it */
+	th = kzalloc(sizeof(*th), GFP_NOFS);
+	if (!th)
+		return ERR_PTR(-ENOMEM);
+	th->service = service;
+	rb_link_node(&th->node, parent, p);
+	rb_insert_color(&th->node, &xi->ticket_handlers);
+	return th;
+}
+
+static void remove_ticket_handler(struct ceph_auth_client *ac,
+				  struct ceph_x_ticket_handler *th)
+{
+	struct ceph_x_info *xi = ac->private;
+
+	dout("remove_ticket_handler %p %d\n", th, th->service);
+	rb_erase(&th->node, &xi->ticket_handlers);
+	ceph_crypto_key_destroy(&th->session_key);
+	if (th->ticket_blob)
+		ceph_buffer_put(th->ticket_blob);
+	kfree(th);
+}
+
+static int ceph_x_proc_ticket_reply(struct ceph_auth_client *ac,
+				    struct ceph_crypto_key *secret,
+				    void *buf, void *end)
+{
+	struct ceph_x_info *xi = ac->private;
+	int num;
+	void *p = buf;
+	int ret;
+	char *dbuf;
+	char *ticket_buf;
+	u8 struct_v;
+
+	dbuf = kmem_cache_alloc(ceph_x_ticketbuf_cachep, GFP_NOFS | GFP_ATOMIC);
+	if (!dbuf)
+		return -ENOMEM;
+
+	ret = -ENOMEM;
+	ticket_buf = kmem_cache_alloc(ceph_x_ticketbuf_cachep,
+				      GFP_NOFS | GFP_ATOMIC);
+	if (!ticket_buf)
+		goto out_dbuf;
+
+	ceph_decode_need(&p, end, 1 + sizeof(u32), bad);
+	struct_v = ceph_decode_8(&p);
+	if (struct_v != 1)
+		goto bad;
+	num = ceph_decode_32(&p);
+	dout("%d tickets\n", num);
+	while (num--) {
+		int type;
+		u8 struct_v;
+		struct ceph_x_ticket_handler *th;
+		void *dp, *dend;
+		int dlen;
+		char is_enc;
+		struct timespec validity;
+		struct ceph_crypto_key old_key;
+		void *tp, *tpend;
+
+		ceph_decode_need(&p, end, sizeof(u32) + 1, bad);
+
+		type = ceph_decode_32(&p);
+		dout(" ticket type %d %s\n", type, ceph_entity_type_name(type));
+
+		struct_v = ceph_decode_8(&p);
+		if (struct_v != 1)
+			goto bad;
+
+		th = get_ticket_handler(ac, type);
+		if (IS_ERR(th)) {
+			ret = PTR_ERR(th);
+			goto out;
+		}
+
+		/* blob for me */
+		dlen = ceph_x_decrypt(secret, &p, end, dbuf,
+				      TEMP_TICKET_BUF_LEN);
+		if (dlen <= 0) {
+			ret = dlen;
+			goto out;
+		}
+		dout(" decrypted %d bytes\n", dlen);
+		dend = dbuf + dlen;
+		dp = dbuf;
+
+		struct_v = ceph_decode_8(&dp);
+		if (struct_v != 1)
+			goto bad;
+
+		memcpy(&old_key, &th->session_key, sizeof(old_key));
+		ret = ceph_crypto_key_decode(&th->session_key, &dp, dend);
+		if (ret)
+			goto out;
+
+		ceph_decode_copy(&dp, &th->validity, sizeof(th->validity));
+		ceph_decode_timespec(&validity, &th->validity);
+		th->expires = get_seconds() + validity.tv_sec;
+		th->renew_after = th->expires - (validity.tv_sec / 4);
+		dout(" expires=%lu renew_after=%lu\n", th->expires,
+		     th->renew_after);
+
+		/* ticket blob for service */
+		ceph_decode_8_safe(&p, end, is_enc, bad);
+		tp = ticket_buf;
+		if (is_enc) {
+			/* encrypted */
+			dout(" encrypted ticket\n");
+			dlen = ceph_x_decrypt(&old_key, &p, end, ticket_buf,
+					      TEMP_TICKET_BUF_LEN);
+			if (dlen < 0) {
+				ret = dlen;
+				goto out;
+			}
+			dlen = ceph_decode_32(&tp);
+		} else {
+			/* unencrypted */
+			ceph_decode_32_safe(&p, end, dlen, bad);
+			ceph_decode_need(&p, end, dlen, bad);
+			ceph_decode_copy(&p, ticket_buf, dlen);
+		}
+		tpend = tp + dlen;
+		dout(" ticket blob is %d bytes\n", dlen);
+		ceph_decode_need(&tp, tpend, 1 + sizeof(u64), bad);
+		struct_v = ceph_decode_8(&tp);
+		th->secret_id = ceph_decode_64(&tp);
+		ret = ceph_decode_buffer(&th->ticket_blob, &tp, tpend);
+		if (ret)
+			goto out;
+		dout(" got ticket service %d (%s) secret_id %lld len %d\n",
+		     type, ceph_entity_type_name(type), th->secret_id,
+		     (int)th->ticket_blob->vec.iov_len);
+		xi->have_keys |= th->service;
+	}
+
+	ret = 0;
+out:
+	kmem_cache_free(ceph_x_ticketbuf_cachep, ticket_buf);
+out_dbuf:
+	kmem_cache_free(ceph_x_ticketbuf_cachep, dbuf);
+	return ret;
+
+bad:
+	ret = -EINVAL;
+	goto out;
+}
+
+static int ceph_x_build_authorizer(struct ceph_auth_client *ac,
+				   struct ceph_x_ticket_handler *th,
+				   struct ceph_x_authorizer *au)
+{
+	int len;
+	struct ceph_x_authorize_a *msg_a;
+	struct ceph_x_authorize_b msg_b;
+	void *p, *end;
+	int ret;
+	int ticket_blob_len =
+		(th->ticket_blob ? th->ticket_blob->vec.iov_len : 0);
+
+	dout("build_authorizer for %s %p\n",
+	     ceph_entity_type_name(th->service), au);
+
+	len = sizeof(*msg_a) + sizeof(msg_b) + sizeof(u32) +
+		ticket_blob_len + 16;
+	dout("  need len %d\n", len);
+	if (au->buf && au->buf->alloc_len < len) {
+		ceph_buffer_put(au->buf);
+		au->buf = NULL;
+	}
+	if (!au->buf) {
+		au->buf = ceph_buffer_new(len, GFP_NOFS);
+		if (!au->buf)
+			return -ENOMEM;
+	}
+	au->service = th->service;
+
+	msg_a = au->buf->vec.iov_base;
+	msg_a->struct_v = 1;
+	msg_a->global_id = cpu_to_le64(ac->global_id);
+	msg_a->service_id = cpu_to_le32(th->service);
+	msg_a->ticket_blob.struct_v = 1;
+	msg_a->ticket_blob.secret_id = cpu_to_le64(th->secret_id);
+	msg_a->ticket_blob.blob_len = cpu_to_le32(ticket_blob_len);
+	if (ticket_blob_len) {
+		memcpy(msg_a->ticket_blob.blob, th->ticket_blob->vec.iov_base,
+		       th->ticket_blob->vec.iov_len);
+	}
+	dout(" th %p secret_id %lld %lld\n", th, th->secret_id,
+	     le64_to_cpu(msg_a->ticket_blob.secret_id));
+
+	p = msg_a + 1;
+	p += ticket_blob_len;
+	end = au->buf->vec.iov_base + au->buf->vec.iov_len;
+
+	get_random_bytes(&au->nonce, sizeof(au->nonce));
+	msg_b.struct_v = 1;
+	msg_b.nonce = cpu_to_le64(au->nonce);
+	ret = ceph_x_encrypt(&th->session_key, &msg_b, sizeof(msg_b),
+			     p, end - p);
+	if (ret < 0)
+		goto out_buf;
+	p += ret;
+	au->buf->vec.iov_len = p - au->buf->vec.iov_base;
+	dout(" built authorizer nonce %llx len %d\n", au->nonce,
+	     (int)au->buf->vec.iov_len);
+	return 0;
+
+out_buf:
+	ceph_buffer_put(au->buf);
+	au->buf = NULL;
+	return ret;
+}
+
+static int ceph_x_encode_ticket(struct ceph_x_ticket_handler *th,
+				void **p, void *end)
+{
+	ceph_decode_need(p, end, 1 + sizeof(u64), bad);
+	ceph_encode_8(p, 1);
+	ceph_encode_64(p, th->secret_id);
+	if (th->ticket_blob) {
+		const char *buf = th->ticket_blob->vec.iov_base;
+		u32 len = th->ticket_blob->vec.iov_len;
+
+		ceph_encode_32_safe(p, end, len, bad);
+		ceph_encode_copy_safe(p, end, buf, len, bad);
+	} else {
+		ceph_encode_32_safe(p, end, 0, bad);
+	}
+
+	return 0;
+bad:
+	return -ERANGE;
+}
+
+static void ceph_x_validate_tickets(struct ceph_auth_client *ac, int *pneed)
+{
+	int want = ac->want_keys;
+	struct ceph_x_info *xi = ac->private;
+	int service;
+
+	*pneed = ac->want_keys & ~(xi->have_keys);
+
+	for (service = 1; service <= want; service <<= 1) {
+		struct ceph_x_ticket_handler *th;
+
+		if (!(ac->want_keys & service))
+			continue;
+
+		if (*pneed & service)
+			continue;
+
+		th = get_ticket_handler(ac, service);
+
+		if (!th) {
+			*pneed |= service;
+			continue;
+		}
+
+		if (get_seconds() >= th->renew_after)
+			*pneed |= service;
+		if (get_seconds() >= th->expires)
+			xi->have_keys &= ~service;
+	}
+}
+
+
+static int ceph_x_build_request(struct ceph_auth_client *ac,
+				void *buf, void *end)
+{
+	struct ceph_x_info *xi = ac->private;
+	int need;
+	struct ceph_x_request_header *head = buf;
+	int ret;
+	struct ceph_x_ticket_handler *th =
+		get_ticket_handler(ac, CEPH_ENTITY_TYPE_AUTH);
+
+	ceph_x_validate_tickets(ac, &need);
+
+	dout("build_request want %x have %x need %x\n",
+	     ac->want_keys, xi->have_keys, need);
+
+	if (need & CEPH_ENTITY_TYPE_AUTH) {
+		struct ceph_x_authenticate *auth = (void *)(head + 1);
+		void *p = auth + 1;
+		struct ceph_x_challenge_blob tmp;
+		char tmp_enc[40];
+		u64 *u;
+
+		if (p > end)
+			return -ERANGE;
+
+		dout(" get_auth_session_key\n");
+		head->op = cpu_to_le16(CEPHX_GET_AUTH_SESSION_KEY);
+
+		/* encrypt and hash */
+		get_random_bytes(&auth->client_challenge, sizeof(u64));
+		tmp.client_challenge = auth->client_challenge;
+		tmp.server_challenge = cpu_to_le64(xi->server_challenge);
+		ret = ceph_x_encrypt(&xi->secret, &tmp, sizeof(tmp),
+				     tmp_enc, sizeof(tmp_enc));
+		if (ret < 0)
+			return ret;
+
+		auth->struct_v = 1;
+		auth->key = 0;
+		for (u = (u64 *)tmp_enc; u + 1 <= (u64 *)(tmp_enc + ret); u++)
+			auth->key ^= *u;
+		dout(" server_challenge %llx client_challenge %llx key %llx\n",
+		     xi->server_challenge, le64_to_cpu(auth->client_challenge),
+		     le64_to_cpu(auth->key));
+
+		/* now encode the old ticket if exists */
+		ret = ceph_x_encode_ticket(th, &p, end);
+		if (ret < 0)
+			return ret;
+
+		return p - buf;
+	}
+
+	if (need) {
+		void *p = head + 1;
+		struct ceph_x_service_ticket_request *req;
+
+		if (p > end)
+			return -ERANGE;
+		head->op = cpu_to_le16(CEPHX_GET_PRINCIPAL_SESSION_KEY);
+
+		BUG_ON(!th);
+		ret = ceph_x_build_authorizer(ac, th, &xi->auth_authorizer);
+		if (ret)
+			return ret;
+		ceph_encode_copy(&p, xi->auth_authorizer.buf->vec.iov_base,
+				 xi->auth_authorizer.buf->vec.iov_len);
+
+		req = p;
+		req->keys = cpu_to_le32(need);
+		p += sizeof(*req);
+		return p - buf;
+	}
+
+	return 0;
+}
+
+static int ceph_x_handle_reply(struct ceph_auth_client *ac, int result,
+			       void *buf, void *end)
+{
+	struct ceph_x_info *xi = ac->private;
+	struct ceph_x_reply_header *head = buf;
+	struct ceph_x_ticket_handler *th;
+	int len = end - buf;
+	int op;
+	int ret;
+
+	if (result)
+		return result;  /* XXX hmm? */
+
+	if (xi->starting) {
+		/* it's a hello */
+		struct ceph_x_server_challenge *sc = buf;
+
+		if (len != sizeof(*sc))
+			return -EINVAL;
+		xi->server_challenge = le64_to_cpu(sc->server_challenge);
+		dout("handle_reply got server challenge %llx\n",
+		     xi->server_challenge);
+		xi->starting = false;
+		xi->have_keys &= ~CEPH_ENTITY_TYPE_AUTH;
+		return -EAGAIN;
+	}
+
+	op = le32_to_cpu(head->op);
+	result = le32_to_cpu(head->result);
+	dout("handle_reply op %d result %d\n", op, result);
+	switch (op) {
+	case CEPHX_GET_AUTH_SESSION_KEY:
+		/* verify auth key */
+		ret = ceph_x_proc_ticket_reply(ac, &xi->secret,
+					       buf + sizeof(*head), end);
+		break;
+
+	case CEPHX_GET_PRINCIPAL_SESSION_KEY:
+		th = get_ticket_handler(ac, CEPH_ENTITY_TYPE_AUTH);
+		BUG_ON(!th);
+		ret = ceph_x_proc_ticket_reply(ac, &th->session_key,
+					       buf + sizeof(*head), end);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+	if (ret)
+		return ret;
+	if (ac->want_keys == xi->have_keys)
+		return 0;
+	return -EAGAIN;
+}
+
+static int ceph_x_create_authorizer(
+	struct ceph_auth_client *ac, int peer_type,
+	struct ceph_authorizer **a,
+	void **buf, size_t *len,
+	void **reply_buf, size_t *reply_len)
+{
+	struct ceph_x_authorizer *au;
+	struct ceph_x_ticket_handler *th;
+	int ret;
+
+	th = get_ticket_handler(ac, peer_type);
+	if (IS_ERR(th))
+		return PTR_ERR(th);
+
+	au = kzalloc(sizeof(*au), GFP_NOFS);
+	if (!au)
+		return -ENOMEM;
+
+	ret = ceph_x_build_authorizer(ac, th, au);
+	if (ret) {
+		kfree(au);
+		return ret;
+	}
+
+	*a = (struct ceph_authorizer *)au;
+	*buf = au->buf->vec.iov_base;
+	*len = au->buf->vec.iov_len;
+	*reply_buf = au->reply_buf;
+	*reply_len = sizeof(au->reply_buf);
+	return 0;
+}
+
+static int ceph_x_verify_authorizer_reply(struct ceph_auth_client *ac,
+					  struct ceph_authorizer *a, size_t len)
+{
+	struct ceph_x_authorizer *au = (void *)a;
+	struct ceph_x_ticket_handler *th;
+	int ret = 0;
+	struct ceph_x_authorize_reply reply;
+	void *p = au->reply_buf;
+	void *end = p + sizeof(au->reply_buf);
+
+	th = get_ticket_handler(ac, au->service);
+	if (!th)
+		return -EIO;  /* hrm! */
+	ret = ceph_x_decrypt(&th->session_key, &p, end, &reply, sizeof(reply));
+	if (ret < 0)
+		return ret;
+	if (ret != sizeof(reply))
+		return -EPERM;
+
+	if (au->nonce + 1 != le64_to_cpu(reply.nonce_plus_one))
+		ret = -EPERM;
+	else
+		ret = 0;
+	dout("verify_authorizer_reply nonce %llx got %llx ret %d\n",
+	     au->nonce, le64_to_cpu(reply.nonce_plus_one), ret);
+	return ret;
+}
+
+static void ceph_x_destroy_authorizer(struct ceph_auth_client *ac,
+				      struct ceph_authorizer *a)
+{
+	struct ceph_x_authorizer *au = (void *)a;
+
+	ceph_buffer_put(au->buf);
+	kfree(au);
+}
+
+
+static void ceph_x_reset(struct ceph_auth_client *ac)
+{
+	struct ceph_x_info *xi = ac->private;
+
+	dout("reset\n");
+	xi->starting = true;
+	xi->server_challenge = 0;
+}
+
+static void ceph_x_destroy(struct ceph_auth_client *ac)
+{
+	struct ceph_x_info *xi = ac->private;
+	struct rb_node *p;
+
+	dout("ceph_x_destroy %p\n", ac);
+	ceph_crypto_key_destroy(&xi->secret);
+
+	while ((p = rb_first(&xi->ticket_handlers)) != NULL) {
+		struct ceph_x_ticket_handler *th =
+			rb_entry(p, struct ceph_x_ticket_handler, node);
+		remove_ticket_handler(ac, th);
+	}
+
+	kmem_cache_destroy(ceph_x_ticketbuf_cachep);
+
+	kfree(ac->private);
+	ac->private = NULL;
+}
+
+static void ceph_x_invalidate_authorizer(struct ceph_auth_client *ac,
+				   int peer_type)
+{
+	struct ceph_x_ticket_handler *th;
+
+	th = get_ticket_handler(ac, peer_type);
+	if (th && !IS_ERR(th))
+		remove_ticket_handler(ac, th);
+}
+
+
+static const struct ceph_auth_client_ops ceph_x_ops = {
+	.is_authenticated = ceph_x_is_authenticated,
+	.build_request = ceph_x_build_request,
+	.handle_reply = ceph_x_handle_reply,
+	.create_authorizer = ceph_x_create_authorizer,
+	.verify_authorizer_reply = ceph_x_verify_authorizer_reply,
+	.destroy_authorizer = ceph_x_destroy_authorizer,
+	.invalidate_authorizer = ceph_x_invalidate_authorizer,
+	.reset =  ceph_x_reset,
+	.destroy = ceph_x_destroy,
+};
+
+
+int ceph_x_init(struct ceph_auth_client *ac)
+{
+	struct ceph_x_info *xi;
+	int ret;
+
+	dout("ceph_x_init %p\n", ac);
+	xi = kzalloc(sizeof(*xi), GFP_NOFS);
+	if (!xi)
+		return -ENOMEM;
+
+	ret = -ENOMEM;
+	ceph_x_ticketbuf_cachep = kmem_cache_create("ceph_x_ticketbuf",
+				      TEMP_TICKET_BUF_LEN, 8,
+				      (SLAB_RECLAIM_ACCOUNT|SLAB_MEM_SPREAD),
+				      NULL);
+	if (!ceph_x_ticketbuf_cachep)
+		goto done_nomem;
+	ret = -EINVAL;
+	if (!ac->secret) {
+		pr_err("no secret set (for auth_x protocol)\n");
+		goto done_nomem;
+	}
+
+	ret = ceph_crypto_key_unarmor(&xi->secret, ac->secret);
+	if (ret)
+		goto done_nomem;
+
+	xi->starting = true;
+	xi->ticket_handlers = RB_ROOT;
+
+	ac->protocol = CEPH_AUTH_CEPHX;
+	ac->private = xi;
+	ac->ops = &ceph_x_ops;
+	return 0;
+
+done_nomem:
+	kfree(xi);
+	if (ceph_x_ticketbuf_cachep)
+		kmem_cache_destroy(ceph_x_ticketbuf_cachep);
+	return ret;
+}
+
+
diff --git a/fs/ceph/auth_x.h b/fs/ceph/auth_x.h
new file mode 100644
index 000000000000..ff6f8180e681
--- /dev/null
+++ b/fs/ceph/auth_x.h
@@ -0,0 +1,49 @@
+#ifndef _FS_CEPH_AUTH_X_H
+#define _FS_CEPH_AUTH_X_H
+
+#include <linux/rbtree.h>
+
+#include "crypto.h"
+#include "auth.h"
+#include "auth_x_protocol.h"
+
+/*
+ * Handle ticket for a single service.
+ */
+struct ceph_x_ticket_handler {
+	struct rb_node node;
+	unsigned service;
+
+	struct ceph_crypto_key session_key;
+	struct ceph_timespec validity;
+
+	u64 secret_id;
+	struct ceph_buffer *ticket_blob;
+
+	unsigned long renew_after, expires;
+};
+
+
+struct ceph_x_authorizer {
+	struct ceph_buffer *buf;
+	unsigned service;
+	u64 nonce;
+	char reply_buf[128];  /* big enough for encrypted blob */
+};
+
+struct ceph_x_info {
+	struct ceph_crypto_key secret;
+
+	bool starting;
+	u64 server_challenge;
+
+	unsigned have_keys;
+	struct rb_root ticket_handlers;
+
+	struct ceph_x_authorizer auth_authorizer;
+};
+
+extern int ceph_x_init(struct ceph_auth_client *ac);
+
+#endif
+
diff --git a/fs/ceph/auth_x_protocol.h b/fs/ceph/auth_x_protocol.h
new file mode 100644
index 000000000000..671d30576c4f
--- /dev/null
+++ b/fs/ceph/auth_x_protocol.h
@@ -0,0 +1,90 @@
+#ifndef __FS_CEPH_AUTH_X_PROTOCOL
+#define __FS_CEPH_AUTH_X_PROTOCOL
+
+#define CEPHX_GET_AUTH_SESSION_KEY      0x0100
+#define CEPHX_GET_PRINCIPAL_SESSION_KEY 0x0200
+#define CEPHX_GET_ROTATING_KEY          0x0400
+
+/* common bits */
+struct ceph_x_ticket_blob {
+	__u8 struct_v;
+	__le64 secret_id;
+	__le32 blob_len;
+	char blob[];
+} __attribute__ ((packed));
+
+
+/* common request/reply headers */
+struct ceph_x_request_header {
+	__le16 op;
+} __attribute__ ((packed));
+
+struct ceph_x_reply_header {
+	__le16 op;
+	__le32 result;
+} __attribute__ ((packed));
+
+
+/* authenticate handshake */
+
+/* initial hello (no reply header) */
+struct ceph_x_server_challenge {
+	__u8 struct_v;
+	__le64 server_challenge;
+} __attribute__ ((packed));
+
+struct ceph_x_authenticate {
+	__u8 struct_v;
+	__le64 client_challenge;
+	__le64 key;
+	/* ticket blob */
+} __attribute__ ((packed));
+
+struct ceph_x_service_ticket_request {
+	__u8 struct_v;
+	__le32 keys;
+} __attribute__ ((packed));
+
+struct ceph_x_challenge_blob {
+	__le64 server_challenge;
+	__le64 client_challenge;
+} __attribute__ ((packed));
+
+
+
+/* authorize handshake */
+
+/*
+ * The authorizer consists of two pieces:
+ *  a - service id, ticket blob
+ *  b - encrypted with session key
+ */
+struct ceph_x_authorize_a {
+	__u8 struct_v;
+	__le64 global_id;
+	__le32 service_id;
+	struct ceph_x_ticket_blob ticket_blob;
+} __attribute__ ((packed));
+
+struct ceph_x_authorize_b {
+	__u8 struct_v;
+	__le64 nonce;
+} __attribute__ ((packed));
+
+struct ceph_x_authorize_reply {
+	__u8 struct_v;
+	__le64 nonce_plus_one;
+} __attribute__ ((packed));
+
+
+/*
+ * encyption bundle
+ */
+#define CEPHX_ENC_MAGIC 0xff009cad8826aa55ull
+
+struct ceph_x_encrypt_header {
+	__u8 struct_v;
+	__le64 magic;
+} __attribute__ ((packed));
+
+#endif
diff --git a/fs/ceph/buffer.c b/fs/ceph/buffer.c
new file mode 100644
index 000000000000..b98086c7aeba
--- /dev/null
+++ b/fs/ceph/buffer.c
@@ -0,0 +1,78 @@
+
+#include "ceph_debug.h"
+#include "buffer.h"
+#include "decode.h"
+
+struct ceph_buffer *ceph_buffer_new(size_t len, gfp_t gfp)
+{
+	struct ceph_buffer *b;
+
+	b = kmalloc(sizeof(*b), gfp);
+	if (!b)
+		return NULL;
+
+	b->vec.iov_base = kmalloc(len, gfp | __GFP_NOWARN);
+	if (b->vec.iov_base) {
+		b->is_vmalloc = false;
+	} else {
+		b->vec.iov_base = __vmalloc(len, gfp, PAGE_KERNEL);
+		if (!b->vec.iov_base) {
+			kfree(b);
+			return NULL;
+		}
+		b->is_vmalloc = true;
+	}
+
+	kref_init(&b->kref);
+	b->alloc_len = len;
+	b->vec.iov_len = len;
+	dout("buffer_new %p\n", b);
+	return b;
+}
+
+void ceph_buffer_release(struct kref *kref)
+{
+	struct ceph_buffer *b = container_of(kref, struct ceph_buffer, kref);
+
+	dout("buffer_release %p\n", b);
+	if (b->vec.iov_base) {
+		if (b->is_vmalloc)
+			vfree(b->vec.iov_base);
+		else
+			kfree(b->vec.iov_base);
+	}
+	kfree(b);
+}
+
+int ceph_buffer_alloc(struct ceph_buffer *b, int len, gfp_t gfp)
+{
+	b->vec.iov_base = kmalloc(len, gfp | __GFP_NOWARN);
+	if (b->vec.iov_base) {
+		b->is_vmalloc = false;
+	} else {
+		b->vec.iov_base = __vmalloc(len, gfp, PAGE_KERNEL);
+		b->is_vmalloc = true;
+	}
+	if (!b->vec.iov_base)
+		return -ENOMEM;
+	b->alloc_len = len;
+	b->vec.iov_len = len;
+	return 0;
+}
+
+int ceph_decode_buffer(struct ceph_buffer **b, void **p, void *end)
+{
+	size_t len;
+
+	ceph_decode_need(p, end, sizeof(u32), bad);
+	len = ceph_decode_32(p);
+	dout("decode_buffer len %d\n", (int)len);
+	ceph_decode_need(p, end, len, bad);
+	*b = ceph_buffer_new(len, GFP_NOFS);
+	if (!*b)
+		return -ENOMEM;
+	ceph_decode_copy(p, (*b)->vec.iov_base, len);
+	return 0;
+bad:
+	return -EINVAL;
+}
diff --git a/fs/ceph/buffer.h b/fs/ceph/buffer.h
new file mode 100644
index 000000000000..58d19014068f
--- /dev/null
+++ b/fs/ceph/buffer.h
@@ -0,0 +1,39 @@
+#ifndef __FS_CEPH_BUFFER_H
+#define __FS_CEPH_BUFFER_H
+
+#include <linux/kref.h>
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
+#include <linux/types.h>
+#include <linux/uio.h>
+
+/*
+ * a simple reference counted buffer.
+ *
+ * use kmalloc for small sizes (<= one page), vmalloc for larger
+ * sizes.
+ */
+struct ceph_buffer {
+	struct kref kref;
+	struct kvec vec;
+	size_t alloc_len;
+	bool is_vmalloc;
+};
+
+extern struct ceph_buffer *ceph_buffer_new(size_t len, gfp_t gfp);
+extern void ceph_buffer_release(struct kref *kref);
+
+static inline struct ceph_buffer *ceph_buffer_get(struct ceph_buffer *b)
+{
+	kref_get(&b->kref);
+	return b;
+}
+
+static inline void ceph_buffer_put(struct ceph_buffer *b)
+{
+	kref_put(&b->kref, ceph_buffer_release);
+}
+
+extern int ceph_decode_buffer(struct ceph_buffer **b, void **p, void *end);
+
+#endif
diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c
new file mode 100644
index 000000000000..db122bb357b8
--- /dev/null
+++ b/fs/ceph/caps.c
@@ -0,0 +1,2927 @@
+#include "ceph_debug.h"
+
+#include <linux/fs.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/vmalloc.h>
+#include <linux/wait.h>
+#include <linux/writeback.h>
+
+#include "super.h"
+#include "decode.h"
+#include "messenger.h"
+
+/*
+ * Capability management
+ *
+ * The Ceph metadata servers control client access to inode metadata
+ * and file data by issuing capabilities, granting clients permission
+ * to read and/or write both inode field and file data to OSDs
+ * (storage nodes).  Each capability consists of a set of bits
+ * indicating which operations are allowed.
+ *
+ * If the client holds a *_SHARED cap, the client has a coherent value
+ * that can be safely read from the cached inode.
+ *
+ * In the case of a *_EXCL (exclusive) or FILE_WR capabilities, the
+ * client is allowed to change inode attributes (e.g., file size,
+ * mtime), note its dirty state in the ceph_cap, and asynchronously
+ * flush that metadata change to the MDS.
+ *
+ * In the event of a conflicting operation (perhaps by another
+ * client), the MDS will revoke the conflicting client capabilities.
+ *
+ * In order for a client to cache an inode, it must hold a capability
+ * with at least one MDS server.  When inodes are released, release
+ * notifications are batched and periodically sent en masse to the MDS
+ * cluster to release server state.
+ */
+
+
+/*
+ * Generate readable cap strings for debugging output.
+ */
+#define MAX_CAP_STR 20
+static char cap_str[MAX_CAP_STR][40];
+static DEFINE_SPINLOCK(cap_str_lock);
+static int last_cap_str;
+
+static char *gcap_string(char *s, int c)
+{
+	if (c & CEPH_CAP_GSHARED)
+		*s++ = 's';
+	if (c & CEPH_CAP_GEXCL)
+		*s++ = 'x';
+	if (c & CEPH_CAP_GCACHE)
+		*s++ = 'c';
+	if (c & CEPH_CAP_GRD)
+		*s++ = 'r';
+	if (c & CEPH_CAP_GWR)
+		*s++ = 'w';
+	if (c & CEPH_CAP_GBUFFER)
+		*s++ = 'b';
+	if (c & CEPH_CAP_GLAZYIO)
+		*s++ = 'l';
+	return s;
+}
+
+const char *ceph_cap_string(int caps)
+{
+	int i;
+	char *s;
+	int c;
+
+	spin_lock(&cap_str_lock);
+	i = last_cap_str++;
+	if (last_cap_str == MAX_CAP_STR)
+		last_cap_str = 0;
+	spin_unlock(&cap_str_lock);
+
+	s = cap_str[i];
+
+	if (caps & CEPH_CAP_PIN)
+		*s++ = 'p';
+
+	c = (caps >> CEPH_CAP_SAUTH) & 3;
+	if (c) {
+		*s++ = 'A';
+		s = gcap_string(s, c);
+	}
+
+	c = (caps >> CEPH_CAP_SLINK) & 3;
+	if (c) {
+		*s++ = 'L';
+		s = gcap_string(s, c);
+	}
+
+	c = (caps >> CEPH_CAP_SXATTR) & 3;
+	if (c) {
+		*s++ = 'X';
+		s = gcap_string(s, c);
+	}
+
+	c = caps >> CEPH_CAP_SFILE;
+	if (c) {
+		*s++ = 'F';
+		s = gcap_string(s, c);
+	}
+
+	if (s == cap_str[i])
+		*s++ = '-';
+	*s = 0;
+	return cap_str[i];
+}
+
+/*
+ * Cap reservations
+ *
+ * Maintain a global pool of preallocated struct ceph_caps, referenced
+ * by struct ceph_caps_reservations.  This ensures that we preallocate
+ * memory needed to successfully process an MDS response.  (If an MDS
+ * sends us cap information and we fail to process it, we will have
+ * problems due to the client and MDS being out of sync.)
+ *
+ * Reservations are 'owned' by a ceph_cap_reservation context.
+ */
+static spinlock_t caps_list_lock;
+static struct list_head caps_list;  /* unused (reserved or unreserved) */
+static int caps_total_count;        /* total caps allocated */
+static int caps_use_count;          /* in use */
+static int caps_reserve_count;      /* unused, reserved */
+static int caps_avail_count;        /* unused, unreserved */
+static int caps_min_count;          /* keep at least this many (unreserved) */
+
+void __init ceph_caps_init(void)
+{
+	INIT_LIST_HEAD(&caps_list);
+	spin_lock_init(&caps_list_lock);
+}
+
+void ceph_caps_finalize(void)
+{
+	struct ceph_cap *cap;
+
+	spin_lock(&caps_list_lock);
+	while (!list_empty(&caps_list)) {
+		cap = list_first_entry(&caps_list, struct ceph_cap, caps_item);
+		list_del(&cap->caps_item);
+		kmem_cache_free(ceph_cap_cachep, cap);
+	}
+	caps_total_count = 0;
+	caps_avail_count = 0;
+	caps_use_count = 0;
+	caps_reserve_count = 0;
+	caps_min_count = 0;
+	spin_unlock(&caps_list_lock);
+}
+
+void ceph_adjust_min_caps(int delta)
+{
+	spin_lock(&caps_list_lock);
+	caps_min_count += delta;
+	BUG_ON(caps_min_count < 0);
+	spin_unlock(&caps_list_lock);
+}
+
+int ceph_reserve_caps(struct ceph_cap_reservation *ctx, int need)
+{
+	int i;
+	struct ceph_cap *cap;
+	int have;
+	int alloc = 0;
+	LIST_HEAD(newcaps);
+	int ret = 0;
+
+	dout("reserve caps ctx=%p need=%d\n", ctx, need);
+
+	/* first reserve any caps that are already allocated */
+	spin_lock(&caps_list_lock);
+	if (caps_avail_count >= need)
+		have = need;
+	else
+		have = caps_avail_count;
+	caps_avail_count -= have;
+	caps_reserve_count += have;
+	BUG_ON(caps_total_count != caps_use_count + caps_reserve_count +
+	       caps_avail_count);
+	spin_unlock(&caps_list_lock);
+
+	for (i = have; i < need; i++) {
+		cap = kmem_cache_alloc(ceph_cap_cachep, GFP_NOFS);
+		if (!cap) {
+			ret = -ENOMEM;
+			goto out_alloc_count;
+		}
+		list_add(&cap->caps_item, &newcaps);
+		alloc++;
+	}
+	BUG_ON(have + alloc != need);
+
+	spin_lock(&caps_list_lock);
+	caps_total_count += alloc;
+	caps_reserve_count += alloc;
+	list_splice(&newcaps, &caps_list);
+
+	BUG_ON(caps_total_count != caps_use_count + caps_reserve_count +
+	       caps_avail_count);
+	spin_unlock(&caps_list_lock);
+
+	ctx->count = need;
+	dout("reserve caps ctx=%p %d = %d used + %d resv + %d avail\n",
+	     ctx, caps_total_count, caps_use_count, caps_reserve_count,
+	     caps_avail_count);
+	return 0;
+
+out_alloc_count:
+	/* we didn't manage to reserve as much as we needed */
+	pr_warning("reserve caps ctx=%p ENOMEM need=%d got=%d\n",
+		   ctx, need, have);
+	return ret;
+}
+
+int ceph_unreserve_caps(struct ceph_cap_reservation *ctx)
+{
+	dout("unreserve caps ctx=%p count=%d\n", ctx, ctx->count);
+	if (ctx->count) {
+		spin_lock(&caps_list_lock);
+		BUG_ON(caps_reserve_count < ctx->count);
+		caps_reserve_count -= ctx->count;
+		caps_avail_count += ctx->count;
+		ctx->count = 0;
+		dout("unreserve caps %d = %d used + %d resv + %d avail\n",
+		     caps_total_count, caps_use_count, caps_reserve_count,
+		     caps_avail_count);
+		BUG_ON(caps_total_count != caps_use_count + caps_reserve_count +
+		       caps_avail_count);
+		spin_unlock(&caps_list_lock);
+	}
+	return 0;
+}
+
+static struct ceph_cap *get_cap(struct ceph_cap_reservation *ctx)
+{
+	struct ceph_cap *cap = NULL;
+
+	/* temporary, until we do something about cap import/export */
+	if (!ctx)
+		return kmem_cache_alloc(ceph_cap_cachep, GFP_NOFS);
+
+	spin_lock(&caps_list_lock);
+	dout("get_cap ctx=%p (%d) %d = %d used + %d resv + %d avail\n",
+	     ctx, ctx->count, caps_total_count, caps_use_count,
+	     caps_reserve_count, caps_avail_count);
+	BUG_ON(!ctx->count);
+	BUG_ON(ctx->count > caps_reserve_count);
+	BUG_ON(list_empty(&caps_list));
+
+	ctx->count--;
+	caps_reserve_count--;
+	caps_use_count++;
+
+	cap = list_first_entry(&caps_list, struct ceph_cap, caps_item);
+	list_del(&cap->caps_item);
+
+	BUG_ON(caps_total_count != caps_use_count + caps_reserve_count +
+	       caps_avail_count);
+	spin_unlock(&caps_list_lock);
+	return cap;
+}
+
+void ceph_put_cap(struct ceph_cap *cap)
+{
+	spin_lock(&caps_list_lock);
+	dout("put_cap %p %d = %d used + %d resv + %d avail\n",
+	     cap, caps_total_count, caps_use_count,
+	     caps_reserve_count, caps_avail_count);
+	caps_use_count--;
+	/*
+	 * Keep some preallocated caps around (ceph_min_count), to
+	 * avoid lots of free/alloc churn.
+	 */
+	if (caps_avail_count >= caps_reserve_count + caps_min_count) {
+		caps_total_count--;
+		kmem_cache_free(ceph_cap_cachep, cap);
+	} else {
+		caps_avail_count++;
+		list_add(&cap->caps_item, &caps_list);
+	}
+
+	BUG_ON(caps_total_count != caps_use_count + caps_reserve_count +
+	       caps_avail_count);
+	spin_unlock(&caps_list_lock);
+}
+
+void ceph_reservation_status(struct ceph_client *client,
+			     int *total, int *avail, int *used, int *reserved,
+			     int *min)
+{
+	if (total)
+		*total = caps_total_count;
+	if (avail)
+		*avail = caps_avail_count;
+	if (used)
+		*used = caps_use_count;
+	if (reserved)
+		*reserved = caps_reserve_count;
+	if (min)
+		*min = caps_min_count;
+}
+
+/*
+ * Find ceph_cap for given mds, if any.
+ *
+ * Called with i_lock held.
+ */
+static struct ceph_cap *__get_cap_for_mds(struct ceph_inode_info *ci, int mds)
+{
+	struct ceph_cap *cap;
+	struct rb_node *n = ci->i_caps.rb_node;
+
+	while (n) {
+		cap = rb_entry(n, struct ceph_cap, ci_node);
+		if (mds < cap->mds)
+			n = n->rb_left;
+		else if (mds > cap->mds)
+			n = n->rb_right;
+		else
+			return cap;
+	}
+	return NULL;
+}
+
+/*
+ * Return id of any MDS with a cap, preferably FILE_WR|WRBUFFER|EXCL, else
+ * -1.
+ */
+static int __ceph_get_cap_mds(struct ceph_inode_info *ci, u32 *mseq)
+{
+	struct ceph_cap *cap;
+	int mds = -1;
+	struct rb_node *p;
+
+	/* prefer mds with WR|WRBUFFER|EXCL caps */
+	for (p = rb_first(&ci->i_caps); p; p = rb_next(p)) {
+		cap = rb_entry(p, struct ceph_cap, ci_node);
+		mds = cap->mds;
+		if (mseq)
+			*mseq = cap->mseq;
+		if (cap->issued & (CEPH_CAP_FILE_WR |
+				   CEPH_CAP_FILE_BUFFER |
+				   CEPH_CAP_FILE_EXCL))
+			break;
+	}
+	return mds;
+}
+
+int ceph_get_cap_mds(struct inode *inode)
+{
+	int mds;
+	spin_lock(&inode->i_lock);
+	mds = __ceph_get_cap_mds(ceph_inode(inode), NULL);
+	spin_unlock(&inode->i_lock);
+	return mds;
+}
+
+/*
+ * Called under i_lock.
+ */
+static void __insert_cap_node(struct ceph_inode_info *ci,
+			      struct ceph_cap *new)
+{
+	struct rb_node **p = &ci->i_caps.rb_node;
+	struct rb_node *parent = NULL;
+	struct ceph_cap *cap = NULL;
+
+	while (*p) {
+		parent = *p;
+		cap = rb_entry(parent, struct ceph_cap, ci_node);
+		if (new->mds < cap->mds)
+			p = &(*p)->rb_left;
+		else if (new->mds > cap->mds)
+			p = &(*p)->rb_right;
+		else
+			BUG();
+	}
+
+	rb_link_node(&new->ci_node, parent, p);
+	rb_insert_color(&new->ci_node, &ci->i_caps);
+}
+
+/*
+ * (re)set cap hold timeouts, which control the delayed release
+ * of unused caps back to the MDS.  Should be called on cap use.
+ */
+static void __cap_set_timeouts(struct ceph_mds_client *mdsc,
+			       struct ceph_inode_info *ci)
+{
+	struct ceph_mount_args *ma = mdsc->client->mount_args;
+
+	ci->i_hold_caps_min = round_jiffies(jiffies +
+					    ma->caps_wanted_delay_min * HZ);
+	ci->i_hold_caps_max = round_jiffies(jiffies +
+					    ma->caps_wanted_delay_max * HZ);
+	dout("__cap_set_timeouts %p min %lu max %lu\n", &ci->vfs_inode,
+	     ci->i_hold_caps_min - jiffies, ci->i_hold_caps_max - jiffies);
+}
+
+/*
+ * (Re)queue cap at the end of the delayed cap release list.
+ *
+ * If I_FLUSH is set, leave the inode at the front of the list.
+ *
+ * Caller holds i_lock
+ *    -> we take mdsc->cap_delay_lock
+ */
+static void __cap_delay_requeue(struct ceph_mds_client *mdsc,
+				struct ceph_inode_info *ci)
+{
+	__cap_set_timeouts(mdsc, ci);
+	dout("__cap_delay_requeue %p flags %d at %lu\n", &ci->vfs_inode,
+	     ci->i_ceph_flags, ci->i_hold_caps_max);
+	if (!mdsc->stopping) {
+		spin_lock(&mdsc->cap_delay_lock);
+		if (!list_empty(&ci->i_cap_delay_list)) {
+			if (ci->i_ceph_flags & CEPH_I_FLUSH)
+				goto no_change;
+			list_del_init(&ci->i_cap_delay_list);
+		}
+		list_add_tail(&ci->i_cap_delay_list, &mdsc->cap_delay_list);
+no_change:
+		spin_unlock(&mdsc->cap_delay_lock);
+	}
+}
+
+/*
+ * Queue an inode for immediate writeback.  Mark inode with I_FLUSH,
+ * indicating we should send a cap message to flush dirty metadata
+ * asap, and move to the front of the delayed cap list.
+ */
+static void __cap_delay_requeue_front(struct ceph_mds_client *mdsc,
+				      struct ceph_inode_info *ci)
+{
+	dout("__cap_delay_requeue_front %p\n", &ci->vfs_inode);
+	spin_lock(&mdsc->cap_delay_lock);
+	ci->i_ceph_flags |= CEPH_I_FLUSH;
+	if (!list_empty(&ci->i_cap_delay_list))
+		list_del_init(&ci->i_cap_delay_list);
+	list_add(&ci->i_cap_delay_list, &mdsc->cap_delay_list);
+	spin_unlock(&mdsc->cap_delay_lock);
+}
+
+/*
+ * Cancel delayed work on cap.
+ *
+ * Caller must hold i_lock.
+ */
+static void __cap_delay_cancel(struct ceph_mds_client *mdsc,
+			       struct ceph_inode_info *ci)
+{
+	dout("__cap_delay_cancel %p\n", &ci->vfs_inode);
+	if (list_empty(&ci->i_cap_delay_list))
+		return;
+	spin_lock(&mdsc->cap_delay_lock);
+	list_del_init(&ci->i_cap_delay_list);
+	spin_unlock(&mdsc->cap_delay_lock);
+}
+
+/*
+ * Common issue checks for add_cap, handle_cap_grant.
+ */
+static void __check_cap_issue(struct ceph_inode_info *ci, struct ceph_cap *cap,
+			      unsigned issued)
+{
+	unsigned had = __ceph_caps_issued(ci, NULL);
+
+	/*
+	 * Each time we receive FILE_CACHE anew, we increment
+	 * i_rdcache_gen.
+	 */
+	if ((issued & CEPH_CAP_FILE_CACHE) &&
+	    (had & CEPH_CAP_FILE_CACHE) == 0)
+		ci->i_rdcache_gen++;
+
+	/*
+	 * if we are newly issued FILE_SHARED, clear I_COMPLETE; we
+	 * don't know what happened to this directory while we didn't
+	 * have the cap.
+	 */
+	if ((issued & CEPH_CAP_FILE_SHARED) &&
+	    (had & CEPH_CAP_FILE_SHARED) == 0) {
+		ci->i_shared_gen++;
+		if (S_ISDIR(ci->vfs_inode.i_mode)) {
+			dout(" marking %p NOT complete\n", &ci->vfs_inode);
+			ci->i_ceph_flags &= ~CEPH_I_COMPLETE;
+		}
+	}
+}
+
+/*
+ * Add a capability under the given MDS session.
+ *
+ * Caller should hold session snap_rwsem (read) and s_mutex.
+ *
+ * @fmode is the open file mode, if we are opening a file, otherwise
+ * it is < 0.  (This is so we can atomically add the cap and add an
+ * open file reference to it.)
+ */
+int ceph_add_cap(struct inode *inode,
+		 struct ceph_mds_session *session, u64 cap_id,
+		 int fmode, unsigned issued, unsigned wanted,
+		 unsigned seq, unsigned mseq, u64 realmino, int flags,
+		 struct ceph_cap_reservation *caps_reservation)
+{
+	struct ceph_mds_client *mdsc = &ceph_inode_to_client(inode)->mdsc;
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	struct ceph_cap *new_cap = NULL;
+	struct ceph_cap *cap;
+	int mds = session->s_mds;
+	int actual_wanted;
+
+	dout("add_cap %p mds%d cap %llx %s seq %d\n", inode,
+	     session->s_mds, cap_id, ceph_cap_string(issued), seq);
+
+	/*
+	 * If we are opening the file, include file mode wanted bits
+	 * in wanted.
+	 */
+	if (fmode >= 0)
+		wanted |= ceph_caps_for_mode(fmode);
+
+retry:
+	spin_lock(&inode->i_lock);
+	cap = __get_cap_for_mds(ci, mds);
+	if (!cap) {
+		if (new_cap) {
+			cap = new_cap;
+			new_cap = NULL;
+		} else {
+			spin_unlock(&inode->i_lock);
+			new_cap = get_cap(caps_reservation);
+			if (new_cap == NULL)
+				return -ENOMEM;
+			goto retry;
+		}
+
+		cap->issued = 0;
+		cap->implemented = 0;
+		cap->mds = mds;
+		cap->mds_wanted = 0;
+
+		cap->ci = ci;
+		__insert_cap_node(ci, cap);
+
+		/* clear out old exporting info?  (i.e. on cap import) */
+		if (ci->i_cap_exporting_mds == mds) {
+			ci->i_cap_exporting_issued = 0;
+			ci->i_cap_exporting_mseq = 0;
+			ci->i_cap_exporting_mds = -1;
+		}
+
+		/* add to session cap list */
+		cap->session = session;
+		spin_lock(&session->s_cap_lock);
+		list_add_tail(&cap->session_caps, &session->s_caps);
+		session->s_nr_caps++;
+		spin_unlock(&session->s_cap_lock);
+	}
+
+	if (!ci->i_snap_realm) {
+		/*
+		 * add this inode to the appropriate snap realm
+		 */
+		struct ceph_snap_realm *realm = ceph_lookup_snap_realm(mdsc,
+							       realmino);
+		if (realm) {
+			ceph_get_snap_realm(mdsc, realm);
+			spin_lock(&realm->inodes_with_caps_lock);
+			ci->i_snap_realm = realm;
+			list_add(&ci->i_snap_realm_item,
+				 &realm->inodes_with_caps);
+			spin_unlock(&realm->inodes_with_caps_lock);
+		} else {
+			pr_err("ceph_add_cap: couldn't find snap realm %llx\n",
+			       realmino);
+		}
+	}
+
+	__check_cap_issue(ci, cap, issued);
+
+	/*
+	 * If we are issued caps we don't want, or the mds' wanted
+	 * value appears to be off, queue a check so we'll release
+	 * later and/or update the mds wanted value.
+	 */
+	actual_wanted = __ceph_caps_wanted(ci);
+	if ((wanted & ~actual_wanted) ||
+	    (issued & ~actual_wanted & CEPH_CAP_ANY_WR)) {
+		dout(" issued %s, mds wanted %s, actual %s, queueing\n",
+		     ceph_cap_string(issued), ceph_cap_string(wanted),
+		     ceph_cap_string(actual_wanted));
+		__cap_delay_requeue(mdsc, ci);
+	}
+
+	if (flags & CEPH_CAP_FLAG_AUTH)
+		ci->i_auth_cap = cap;
+	else if (ci->i_auth_cap == cap)
+		ci->i_auth_cap = NULL;
+
+	dout("add_cap inode %p (%llx.%llx) cap %p %s now %s seq %d mds%d\n",
+	     inode, ceph_vinop(inode), cap, ceph_cap_string(issued),
+	     ceph_cap_string(issued|cap->issued), seq, mds);
+	cap->cap_id = cap_id;
+	cap->issued = issued;
+	cap->implemented |= issued;
+	cap->mds_wanted |= wanted;
+	cap->seq = seq;
+	cap->issue_seq = seq;
+	cap->mseq = mseq;
+	cap->cap_gen = session->s_cap_gen;
+
+	if (fmode >= 0)
+		__ceph_get_fmode(ci, fmode);
+	spin_unlock(&inode->i_lock);
+	wake_up(&ci->i_cap_wq);
+	return 0;
+}
+
+/*
+ * Return true if cap has not timed out and belongs to the current
+ * generation of the MDS session (i.e. has not gone 'stale' due to
+ * us losing touch with the mds).
+ */
+static int __cap_is_valid(struct ceph_cap *cap)
+{
+	unsigned long ttl;
+	u32 gen;
+
+	spin_lock(&cap->session->s_cap_lock);
+	gen = cap->session->s_cap_gen;
+	ttl = cap->session->s_cap_ttl;
+	spin_unlock(&cap->session->s_cap_lock);
+
+	if (cap->cap_gen < gen || time_after_eq(jiffies, ttl)) {
+		dout("__cap_is_valid %p cap %p issued %s "
+		     "but STALE (gen %u vs %u)\n", &cap->ci->vfs_inode,
+		     cap, ceph_cap_string(cap->issued), cap->cap_gen, gen);
+		return 0;
+	}
+
+	return 1;
+}
+
+/*
+ * Return set of valid cap bits issued to us.  Note that caps time
+ * out, and may be invalidated in bulk if the client session times out
+ * and session->s_cap_gen is bumped.
+ */
+int __ceph_caps_issued(struct ceph_inode_info *ci, int *implemented)
+{
+	int have = ci->i_snap_caps | ci->i_cap_exporting_issued;
+	struct ceph_cap *cap;
+	struct rb_node *p;
+
+	if (implemented)
+		*implemented = 0;
+	for (p = rb_first(&ci->i_caps); p; p = rb_next(p)) {
+		cap = rb_entry(p, struct ceph_cap, ci_node);
+		if (!__cap_is_valid(cap))
+			continue;
+		dout("__ceph_caps_issued %p cap %p issued %s\n",
+		     &ci->vfs_inode, cap, ceph_cap_string(cap->issued));
+		have |= cap->issued;
+		if (implemented)
+			*implemented |= cap->implemented;
+	}
+	return have;
+}
+
+/*
+ * Get cap bits issued by caps other than @ocap
+ */
+int __ceph_caps_issued_other(struct ceph_inode_info *ci, struct ceph_cap *ocap)
+{
+	int have = ci->i_snap_caps;
+	struct ceph_cap *cap;
+	struct rb_node *p;
+
+	for (p = rb_first(&ci->i_caps); p; p = rb_next(p)) {
+		cap = rb_entry(p, struct ceph_cap, ci_node);
+		if (cap == ocap)
+			continue;
+		if (!__cap_is_valid(cap))
+			continue;
+		have |= cap->issued;
+	}
+	return have;
+}
+
+/*
+ * Move a cap to the end of the LRU (oldest caps at list head, newest
+ * at list tail).
+ */
+static void __touch_cap(struct ceph_cap *cap)
+{
+	struct ceph_mds_session *s = cap->session;
+
+	spin_lock(&s->s_cap_lock);
+	if (s->s_cap_iterator == NULL) {
+		dout("__touch_cap %p cap %p mds%d\n", &cap->ci->vfs_inode, cap,
+		     s->s_mds);
+		list_move_tail(&cap->session_caps, &s->s_caps);
+	} else {
+		dout("__touch_cap %p cap %p mds%d NOP, iterating over caps\n",
+		     &cap->ci->vfs_inode, cap, s->s_mds);
+	}
+	spin_unlock(&s->s_cap_lock);
+}
+
+/*
+ * Check if we hold the given mask.  If so, move the cap(s) to the
+ * front of their respective LRUs.  (This is the preferred way for
+ * callers to check for caps they want.)
+ */
+int __ceph_caps_issued_mask(struct ceph_inode_info *ci, int mask, int touch)
+{
+	struct ceph_cap *cap;
+	struct rb_node *p;
+	int have = ci->i_snap_caps;
+
+	if ((have & mask) == mask) {
+		dout("__ceph_caps_issued_mask %p snap issued %s"
+		     " (mask %s)\n", &ci->vfs_inode,
+		     ceph_cap_string(have),
+		     ceph_cap_string(mask));
+		return 1;
+	}
+
+	for (p = rb_first(&ci->i_caps); p; p = rb_next(p)) {
+		cap = rb_entry(p, struct ceph_cap, ci_node);
+		if (!__cap_is_valid(cap))
+			continue;
+		if ((cap->issued & mask) == mask) {
+			dout("__ceph_caps_issued_mask %p cap %p issued %s"
+			     " (mask %s)\n", &ci->vfs_inode, cap,
+			     ceph_cap_string(cap->issued),
+			     ceph_cap_string(mask));
+			if (touch)
+				__touch_cap(cap);
+			return 1;
+		}
+
+		/* does a combination of caps satisfy mask? */
+		have |= cap->issued;
+		if ((have & mask) == mask) {
+			dout("__ceph_caps_issued_mask %p combo issued %s"
+			     " (mask %s)\n", &ci->vfs_inode,
+			     ceph_cap_string(cap->issued),
+			     ceph_cap_string(mask));
+			if (touch) {
+				struct rb_node *q;
+
+				/* touch this + preceeding caps */
+				__touch_cap(cap);
+				for (q = rb_first(&ci->i_caps); q != p;
+				     q = rb_next(q)) {
+					cap = rb_entry(q, struct ceph_cap,
+						       ci_node);
+					if (!__cap_is_valid(cap))
+						continue;
+					__touch_cap(cap);
+				}
+			}
+			return 1;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * Return true if mask caps are currently being revoked by an MDS.
+ */
+int ceph_caps_revoking(struct ceph_inode_info *ci, int mask)
+{
+	struct inode *inode = &ci->vfs_inode;
+	struct ceph_cap *cap;
+	struct rb_node *p;
+	int ret = 0;
+
+	spin_lock(&inode->i_lock);
+	for (p = rb_first(&ci->i_caps); p; p = rb_next(p)) {
+		cap = rb_entry(p, struct ceph_cap, ci_node);
+		if (__cap_is_valid(cap) &&
+		    (cap->implemented & ~cap->issued & mask)) {
+			ret = 1;
+			break;
+		}
+	}
+	spin_unlock(&inode->i_lock);
+	dout("ceph_caps_revoking %p %s = %d\n", inode,
+	     ceph_cap_string(mask), ret);
+	return ret;
+}
+
+int __ceph_caps_used(struct ceph_inode_info *ci)
+{
+	int used = 0;
+	if (ci->i_pin_ref)
+		used |= CEPH_CAP_PIN;
+	if (ci->i_rd_ref)
+		used |= CEPH_CAP_FILE_RD;
+	if (ci->i_rdcache_ref || ci->i_rdcache_gen)
+		used |= CEPH_CAP_FILE_CACHE;
+	if (ci->i_wr_ref)
+		used |= CEPH_CAP_FILE_WR;
+	if (ci->i_wrbuffer_ref)
+		used |= CEPH_CAP_FILE_BUFFER;
+	return used;
+}
+
+/*
+ * wanted, by virtue of open file modes
+ */
+int __ceph_caps_file_wanted(struct ceph_inode_info *ci)
+{
+	int want = 0;
+	int mode;
+	for (mode = 0; mode < 4; mode++)
+		if (ci->i_nr_by_mode[mode])
+			want |= ceph_caps_for_mode(mode);
+	return want;
+}
+
+/*
+ * Return caps we have registered with the MDS(s) as 'wanted'.
+ */
+int __ceph_caps_mds_wanted(struct ceph_inode_info *ci)
+{
+	struct ceph_cap *cap;
+	struct rb_node *p;
+	int mds_wanted = 0;
+
+	for (p = rb_first(&ci->i_caps); p; p = rb_next(p)) {
+		cap = rb_entry(p, struct ceph_cap, ci_node);
+		if (!__cap_is_valid(cap))
+			continue;
+		mds_wanted |= cap->mds_wanted;
+	}
+	return mds_wanted;
+}
+
+/*
+ * called under i_lock
+ */
+static int __ceph_is_any_caps(struct ceph_inode_info *ci)
+{
+	return !RB_EMPTY_ROOT(&ci->i_caps) || ci->i_cap_exporting_mds >= 0;
+}
+
+/*
+ * caller should hold i_lock.
+ * caller will not hold session s_mutex if called from destroy_inode.
+ */
+void __ceph_remove_cap(struct ceph_cap *cap)
+{
+	struct ceph_mds_session *session = cap->session;
+	struct ceph_inode_info *ci = cap->ci;
+	struct ceph_mds_client *mdsc = &ceph_client(ci->vfs_inode.i_sb)->mdsc;
+
+	dout("__ceph_remove_cap %p from %p\n", cap, &ci->vfs_inode);
+
+	/* remove from inode list */
+	rb_erase(&cap->ci_node, &ci->i_caps);
+	cap->ci = NULL;
+	if (ci->i_auth_cap == cap)
+		ci->i_auth_cap = NULL;
+
+	/* remove from session list */
+	spin_lock(&session->s_cap_lock);
+	if (session->s_cap_iterator == cap) {
+		/* not yet, we are iterating over this very cap */
+		dout("__ceph_remove_cap  delaying %p removal from session %p\n",
+		     cap, cap->session);
+	} else {
+		list_del_init(&cap->session_caps);
+		session->s_nr_caps--;
+		cap->session = NULL;
+	}
+	spin_unlock(&session->s_cap_lock);
+
+	if (cap->session == NULL)
+		ceph_put_cap(cap);
+
+	if (!__ceph_is_any_caps(ci) && ci->i_snap_realm) {
+		struct ceph_snap_realm *realm = ci->i_snap_realm;
+		spin_lock(&realm->inodes_with_caps_lock);
+		list_del_init(&ci->i_snap_realm_item);
+		ci->i_snap_realm_counter++;
+		ci->i_snap_realm = NULL;
+		spin_unlock(&realm->inodes_with_caps_lock);
+		ceph_put_snap_realm(mdsc, realm);
+	}
+	if (!__ceph_is_any_real_caps(ci))
+		__cap_delay_cancel(mdsc, ci);
+}
+
+/*
+ * Build and send a cap message to the given MDS.
+ *
+ * Caller should be holding s_mutex.
+ */
+static int send_cap_msg(struct ceph_mds_session *session,
+			u64 ino, u64 cid, int op,
+			int caps, int wanted, int dirty,
+			u32 seq, u64 flush_tid, u32 issue_seq, u32 mseq,
+			u64 size, u64 max_size,
+			struct timespec *mtime, struct timespec *atime,
+			u64 time_warp_seq,
+			uid_t uid, gid_t gid, mode_t mode,
+			u64 xattr_version,
+			struct ceph_buffer *xattrs_buf,
+			u64 follows)
+{
+	struct ceph_mds_caps *fc;
+	struct ceph_msg *msg;
+
+	dout("send_cap_msg %s %llx %llx caps %s wanted %s dirty %s"
+	     " seq %u/%u mseq %u follows %lld size %llu/%llu"
+	     " xattr_ver %llu xattr_len %d\n", ceph_cap_op_name(op),
+	     cid, ino, ceph_cap_string(caps), ceph_cap_string(wanted),
+	     ceph_cap_string(dirty),
+	     seq, issue_seq, mseq, follows, size, max_size,
+	     xattr_version, xattrs_buf ? (int)xattrs_buf->vec.iov_len : 0);
+
+	msg = ceph_msg_new(CEPH_MSG_CLIENT_CAPS, sizeof(*fc), 0, 0, NULL);
+	if (IS_ERR(msg))
+		return PTR_ERR(msg);
+
+	msg->hdr.tid = cpu_to_le64(flush_tid);
+
+	fc = msg->front.iov_base;
+	memset(fc, 0, sizeof(*fc));
+
+	fc->cap_id = cpu_to_le64(cid);
+	fc->op = cpu_to_le32(op);
+	fc->seq = cpu_to_le32(seq);
+	fc->issue_seq = cpu_to_le32(issue_seq);
+	fc->migrate_seq = cpu_to_le32(mseq);
+	fc->caps = cpu_to_le32(caps);
+	fc->wanted = cpu_to_le32(wanted);
+	fc->dirty = cpu_to_le32(dirty);
+	fc->ino = cpu_to_le64(ino);
+	fc->snap_follows = cpu_to_le64(follows);
+
+	fc->size = cpu_to_le64(size);
+	fc->max_size = cpu_to_le64(max_size);
+	if (mtime)
+		ceph_encode_timespec(&fc->mtime, mtime);
+	if (atime)
+		ceph_encode_timespec(&fc->atime, atime);
+	fc->time_warp_seq = cpu_to_le32(time_warp_seq);
+
+	fc->uid = cpu_to_le32(uid);
+	fc->gid = cpu_to_le32(gid);
+	fc->mode = cpu_to_le32(mode);
+
+	fc->xattr_version = cpu_to_le64(xattr_version);
+	if (xattrs_buf) {
+		msg->middle = ceph_buffer_get(xattrs_buf);
+		fc->xattr_len = cpu_to_le32(xattrs_buf->vec.iov_len);
+		msg->hdr.middle_len = cpu_to_le32(xattrs_buf->vec.iov_len);
+	}
+
+	ceph_con_send(&session->s_con, msg);
+	return 0;
+}
+
+/*
+ * Queue cap releases when an inode is dropped from our cache.  Since
+ * inode is about to be destroyed, there is no need for i_lock.
+ */
+void ceph_queue_caps_release(struct inode *inode)
+{
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	struct rb_node *p;
+
+	p = rb_first(&ci->i_caps);
+	while (p) {
+		struct ceph_cap *cap = rb_entry(p, struct ceph_cap, ci_node);
+		struct ceph_mds_session *session = cap->session;
+		struct ceph_msg *msg;
+		struct ceph_mds_cap_release *head;
+		struct ceph_mds_cap_item *item;
+
+		spin_lock(&session->s_cap_lock);
+		BUG_ON(!session->s_num_cap_releases);
+		msg = list_first_entry(&session->s_cap_releases,
+				       struct ceph_msg, list_head);
+
+		dout(" adding %p release to mds%d msg %p (%d left)\n",
+		     inode, session->s_mds, msg, session->s_num_cap_releases);
+
+		BUG_ON(msg->front.iov_len + sizeof(*item) > PAGE_CACHE_SIZE);
+		head = msg->front.iov_base;
+		head->num = cpu_to_le32(le32_to_cpu(head->num) + 1);
+		item = msg->front.iov_base + msg->front.iov_len;
+		item->ino = cpu_to_le64(ceph_ino(inode));
+		item->cap_id = cpu_to_le64(cap->cap_id);
+		item->migrate_seq = cpu_to_le32(cap->mseq);
+		item->seq = cpu_to_le32(cap->issue_seq);
+
+		session->s_num_cap_releases--;
+
+		msg->front.iov_len += sizeof(*item);
+		if (le32_to_cpu(head->num) == CEPH_CAPS_PER_RELEASE) {
+			dout(" release msg %p full\n", msg);
+			list_move_tail(&msg->list_head,
+				       &session->s_cap_releases_done);
+		} else {
+			dout(" release msg %p at %d/%d (%d)\n", msg,
+			     (int)le32_to_cpu(head->num),
+			     (int)CEPH_CAPS_PER_RELEASE,
+			     (int)msg->front.iov_len);
+		}
+		spin_unlock(&session->s_cap_lock);
+		p = rb_next(p);
+		__ceph_remove_cap(cap);
+	}
+}
+
+/*
+ * Send a cap msg on the given inode.  Update our caps state, then
+ * drop i_lock and send the message.
+ *
+ * Make note of max_size reported/requested from mds, revoked caps
+ * that have now been implemented.
+ *
+ * Make half-hearted attempt ot to invalidate page cache if we are
+ * dropping RDCACHE.  Note that this will leave behind locked pages
+ * that we'll then need to deal with elsewhere.
+ *
+ * Return non-zero if delayed release, or we experienced an error
+ * such that the caller should requeue + retry later.
+ *
+ * called with i_lock, then drops it.
+ * caller should hold snap_rwsem (read), s_mutex.
+ */
+static int __send_cap(struct ceph_mds_client *mdsc, struct ceph_cap *cap,
+		      int op, int used, int want, int retain, int flushing,
+		      unsigned *pflush_tid)
+	__releases(cap->ci->vfs_inode->i_lock)
+{
+	struct ceph_inode_info *ci = cap->ci;
+	struct inode *inode = &ci->vfs_inode;
+	u64 cap_id = cap->cap_id;
+	int held, revoking, dropping, keep;
+	u64 seq, issue_seq, mseq, time_warp_seq, follows;
+	u64 size, max_size;
+	struct timespec mtime, atime;
+	int wake = 0;
+	mode_t mode;
+	uid_t uid;
+	gid_t gid;
+	struct ceph_mds_session *session;
+	u64 xattr_version = 0;
+	int delayed = 0;
+	u64 flush_tid = 0;
+	int i;
+	int ret;
+
+	held = cap->issued | cap->implemented;
+	revoking = cap->implemented & ~cap->issued;
+	retain &= ~revoking;
+	dropping = cap->issued & ~retain;
+
+	dout("__send_cap %p cap %p session %p %s -> %s (revoking %s)\n",
+	     inode, cap, cap->session,
+	     ceph_cap_string(held), ceph_cap_string(held & retain),
+	     ceph_cap_string(revoking));
+	BUG_ON((retain & CEPH_CAP_PIN) == 0);
+
+	session = cap->session;
+
+	/* don't release wanted unless we've waited a bit. */
+	if ((ci->i_ceph_flags & CEPH_I_NODELAY) == 0 &&
+	    time_before(jiffies, ci->i_hold_caps_min)) {
+		dout(" delaying issued %s -> %s, wanted %s -> %s on send\n",
+		     ceph_cap_string(cap->issued),
+		     ceph_cap_string(cap->issued & retain),
+		     ceph_cap_string(cap->mds_wanted),
+		     ceph_cap_string(want));
+		want |= cap->mds_wanted;
+		retain |= cap->issued;
+		delayed = 1;
+	}
+	ci->i_ceph_flags &= ~(CEPH_I_NODELAY | CEPH_I_FLUSH);
+
+	cap->issued &= retain;  /* drop bits we don't want */
+	if (cap->implemented & ~cap->issued) {
+		/*
+		 * Wake up any waiters on wanted -> needed transition.
+		 * This is due to the weird transition from buffered
+		 * to sync IO... we need to flush dirty pages _before_
+		 * allowing sync writes to avoid reordering.
+		 */
+		wake = 1;
+	}
+	cap->implemented &= cap->issued | used;
+	cap->mds_wanted = want;
+
+	if (flushing) {
+		/*
+		 * assign a tid for flush operations so we can avoid
+		 * flush1 -> dirty1 -> flush2 -> flushack1 -> mark
+		 * clean type races.  track latest tid for every bit
+		 * so we can handle flush AxFw, flush Fw, and have the
+		 * first ack clean Ax.
+		 */
+		flush_tid = ++ci->i_cap_flush_last_tid;
+		if (pflush_tid)
+			*pflush_tid = flush_tid;
+		dout(" cap_flush_tid %d\n", (int)flush_tid);
+		for (i = 0; i < CEPH_CAP_BITS; i++)
+			if (flushing & (1 << i))
+				ci->i_cap_flush_tid[i] = flush_tid;
+	}
+
+	keep = cap->implemented;
+	seq = cap->seq;
+	issue_seq = cap->issue_seq;
+	mseq = cap->mseq;
+	size = inode->i_size;
+	ci->i_reported_size = size;
+	max_size = ci->i_wanted_max_size;
+	ci->i_requested_max_size = max_size;
+	mtime = inode->i_mtime;
+	atime = inode->i_atime;
+	time_warp_seq = ci->i_time_warp_seq;
+	follows = ci->i_snap_realm->cached_context->seq;
+	uid = inode->i_uid;
+	gid = inode->i_gid;
+	mode = inode->i_mode;
+
+	if (dropping & CEPH_CAP_XATTR_EXCL) {
+		__ceph_build_xattrs_blob(ci);
+		xattr_version = ci->i_xattrs.version + 1;
+	}
+
+	spin_unlock(&inode->i_lock);
+
+	ret = send_cap_msg(session, ceph_vino(inode).ino, cap_id,
+		op, keep, want, flushing, seq, flush_tid, issue_seq, mseq,
+		size, max_size, &mtime, &atime, time_warp_seq,
+		uid, gid, mode,
+		xattr_version,
+		(flushing & CEPH_CAP_XATTR_EXCL) ? ci->i_xattrs.blob : NULL,
+		follows);
+	if (ret < 0) {
+		dout("error sending cap msg, must requeue %p\n", inode);
+		delayed = 1;
+	}
+
+	if (wake)
+		wake_up(&ci->i_cap_wq);
+
+	return delayed;
+}
+
+/*
+ * When a snapshot is taken, clients accumulate dirty metadata on
+ * inodes with capabilities in ceph_cap_snaps to describe the file
+ * state at the time the snapshot was taken.  This must be flushed
+ * asynchronously back to the MDS once sync writes complete and dirty
+ * data is written out.
+ *
+ * Called under i_lock.  Takes s_mutex as needed.
+ */
+void __ceph_flush_snaps(struct ceph_inode_info *ci,
+			struct ceph_mds_session **psession)
+{
+	struct inode *inode = &ci->vfs_inode;
+	int mds;
+	struct ceph_cap_snap *capsnap;
+	u32 mseq;
+	struct ceph_mds_client *mdsc = &ceph_inode_to_client(inode)->mdsc;
+	struct ceph_mds_session *session = NULL; /* if session != NULL, we hold
+						    session->s_mutex */
+	u64 next_follows = 0;  /* keep track of how far we've gotten through the
+			     i_cap_snaps list, and skip these entries next time
+			     around to avoid an infinite loop */
+
+	if (psession)
+		session = *psession;
+
+	dout("__flush_snaps %p\n", inode);
+retry:
+	list_for_each_entry(capsnap, &ci->i_cap_snaps, ci_item) {
+		/* avoid an infiniute loop after retry */
+		if (capsnap->follows < next_follows)
+			continue;
+		/*
+		 * we need to wait for sync writes to complete and for dirty
+		 * pages to be written out.
+		 */
+		if (capsnap->dirty_pages || capsnap->writing)
+			continue;
+
+		/* pick mds, take s_mutex */
+		mds = __ceph_get_cap_mds(ci, &mseq);
+		if (session && session->s_mds != mds) {
+			dout("oops, wrong session %p mutex\n", session);
+			mutex_unlock(&session->s_mutex);
+			ceph_put_mds_session(session);
+			session = NULL;
+		}
+		if (!session) {
+			spin_unlock(&inode->i_lock);
+			mutex_lock(&mdsc->mutex);
+			session = __ceph_lookup_mds_session(mdsc, mds);
+			mutex_unlock(&mdsc->mutex);
+			if (session) {
+				dout("inverting session/ino locks on %p\n",
+				     session);
+				mutex_lock(&session->s_mutex);
+			}
+			/*
+			 * if session == NULL, we raced against a cap
+			 * deletion.  retry, and we'll get a better
+			 * @mds value next time.
+			 */
+			spin_lock(&inode->i_lock);
+			goto retry;
+		}
+
+		capsnap->flush_tid = ++ci->i_cap_flush_last_tid;
+		atomic_inc(&capsnap->nref);
+		if (!list_empty(&capsnap->flushing_item))
+			list_del_init(&capsnap->flushing_item);
+		list_add_tail(&capsnap->flushing_item,
+			      &session->s_cap_snaps_flushing);
+		spin_unlock(&inode->i_lock);
+
+		dout("flush_snaps %p cap_snap %p follows %lld size %llu\n",
+		     inode, capsnap, next_follows, capsnap->size);
+		send_cap_msg(session, ceph_vino(inode).ino, 0,
+			     CEPH_CAP_OP_FLUSHSNAP, capsnap->issued, 0,
+			     capsnap->dirty, 0, capsnap->flush_tid, 0, mseq,
+			     capsnap->size, 0,
+			     &capsnap->mtime, &capsnap->atime,
+			     capsnap->time_warp_seq,
+			     capsnap->uid, capsnap->gid, capsnap->mode,
+			     0, NULL,
+			     capsnap->follows);
+
+		next_follows = capsnap->follows + 1;
+		ceph_put_cap_snap(capsnap);
+
+		spin_lock(&inode->i_lock);
+		goto retry;
+	}
+
+	/* we flushed them all; remove this inode from the queue */
+	spin_lock(&mdsc->snap_flush_lock);
+	list_del_init(&ci->i_snap_flush_item);
+	spin_unlock(&mdsc->snap_flush_lock);
+
+	if (psession)
+		*psession = session;
+	else if (session) {
+		mutex_unlock(&session->s_mutex);
+		ceph_put_mds_session(session);
+	}
+}
+
+static void ceph_flush_snaps(struct ceph_inode_info *ci)
+{
+	struct inode *inode = &ci->vfs_inode;
+
+	spin_lock(&inode->i_lock);
+	__ceph_flush_snaps(ci, NULL);
+	spin_unlock(&inode->i_lock);
+}
+
+/*
+ * Mark caps dirty.  If inode is newly dirty, add to the global dirty
+ * list.
+ */
+void __ceph_mark_dirty_caps(struct ceph_inode_info *ci, int mask)
+{
+	struct ceph_mds_client *mdsc = &ceph_client(ci->vfs_inode.i_sb)->mdsc;
+	struct inode *inode = &ci->vfs_inode;
+	int was = ci->i_dirty_caps;
+	int dirty = 0;
+
+	dout("__mark_dirty_caps %p %s dirty %s -> %s\n", &ci->vfs_inode,
+	     ceph_cap_string(mask), ceph_cap_string(was),
+	     ceph_cap_string(was | mask));
+	ci->i_dirty_caps |= mask;
+	if (was == 0) {
+		dout(" inode %p now dirty\n", &ci->vfs_inode);
+		BUG_ON(!list_empty(&ci->i_dirty_item));
+		spin_lock(&mdsc->cap_dirty_lock);
+		list_add(&ci->i_dirty_item, &mdsc->cap_dirty);
+		spin_unlock(&mdsc->cap_dirty_lock);
+		if (ci->i_flushing_caps == 0) {
+			igrab(inode);
+			dirty |= I_DIRTY_SYNC;
+		}
+	}
+	BUG_ON(list_empty(&ci->i_dirty_item));
+	if (((was | ci->i_flushing_caps) & CEPH_CAP_FILE_BUFFER) &&
+	    (mask & CEPH_CAP_FILE_BUFFER))
+		dirty |= I_DIRTY_DATASYNC;
+	if (dirty)
+		__mark_inode_dirty(inode, dirty);
+	__cap_delay_requeue(mdsc, ci);
+}
+
+/*
+ * Add dirty inode to the flushing list.  Assigned a seq number so we
+ * can wait for caps to flush without starving.
+ *
+ * Called under i_lock.
+ */
+static int __mark_caps_flushing(struct inode *inode,
+				 struct ceph_mds_session *session)
+{
+	struct ceph_mds_client *mdsc = &ceph_client(inode->i_sb)->mdsc;
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	int flushing;
+
+	BUG_ON(ci->i_dirty_caps == 0);
+	BUG_ON(list_empty(&ci->i_dirty_item));
+
+	flushing = ci->i_dirty_caps;
+	dout("__mark_caps_flushing flushing %s, flushing_caps %s -> %s\n",
+	     ceph_cap_string(flushing),
+	     ceph_cap_string(ci->i_flushing_caps),
+	     ceph_cap_string(ci->i_flushing_caps | flushing));
+	ci->i_flushing_caps |= flushing;
+	ci->i_dirty_caps = 0;
+	dout(" inode %p now !dirty\n", inode);
+
+	spin_lock(&mdsc->cap_dirty_lock);
+	list_del_init(&ci->i_dirty_item);
+
+	ci->i_cap_flush_seq = ++mdsc->cap_flush_seq;
+	if (list_empty(&ci->i_flushing_item)) {
+		list_add_tail(&ci->i_flushing_item, &session->s_cap_flushing);
+		mdsc->num_cap_flushing++;
+		dout(" inode %p now flushing seq %lld\n", inode,
+		     ci->i_cap_flush_seq);
+	} else {
+		list_move_tail(&ci->i_flushing_item, &session->s_cap_flushing);
+		dout(" inode %p now flushing (more) seq %lld\n", inode,
+		     ci->i_cap_flush_seq);
+	}
+	spin_unlock(&mdsc->cap_dirty_lock);
+
+	return flushing;
+}
+
+/*
+ * try to invalidate mapping pages without blocking.
+ */
+static int mapping_is_empty(struct address_space *mapping)
+{
+	struct page *page = find_get_page(mapping, 0);
+
+	if (!page)
+		return 1;
+
+	put_page(page);
+	return 0;
+}
+
+static int try_nonblocking_invalidate(struct inode *inode)
+{
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	u32 invalidating_gen = ci->i_rdcache_gen;
+
+	spin_unlock(&inode->i_lock);
+	invalidate_mapping_pages(&inode->i_data, 0, -1);
+	spin_lock(&inode->i_lock);
+
+	if (mapping_is_empty(&inode->i_data) &&
+	    invalidating_gen == ci->i_rdcache_gen) {
+		/* success. */
+		dout("try_nonblocking_invalidate %p success\n", inode);
+		ci->i_rdcache_gen = 0;
+		ci->i_rdcache_revoking = 0;
+		return 0;
+	}
+	dout("try_nonblocking_invalidate %p failed\n", inode);
+	return -1;
+}
+
+/*
+ * Swiss army knife function to examine currently used and wanted
+ * versus held caps.  Release, flush, ack revoked caps to mds as
+ * appropriate.
+ *
+ *  CHECK_CAPS_NODELAY - caller is delayed work and we should not delay
+ *    cap release further.
+ *  CHECK_CAPS_AUTHONLY - we should only check the auth cap
+ *  CHECK_CAPS_FLUSH - we should flush any dirty caps immediately, without
+ *    further delay.
+ */
+void ceph_check_caps(struct ceph_inode_info *ci, int flags,
+		     struct ceph_mds_session *session)
+{
+	struct ceph_client *client = ceph_inode_to_client(&ci->vfs_inode);
+	struct ceph_mds_client *mdsc = &client->mdsc;
+	struct inode *inode = &ci->vfs_inode;
+	struct ceph_cap *cap;
+	int file_wanted, used;
+	int took_snap_rwsem = 0;             /* true if mdsc->snap_rwsem held */
+	int drop_session_lock = session ? 0 : 1;
+	int issued, implemented, want, retain, revoking, flushing = 0;
+	int mds = -1;   /* keep track of how far we've gone through i_caps list
+			   to avoid an infinite loop on retry */
+	struct rb_node *p;
+	int tried_invalidate = 0;
+	int delayed = 0, sent = 0, force_requeue = 0, num;
+	int queue_invalidate = 0;
+	int is_delayed = flags & CHECK_CAPS_NODELAY;
+
+	/* if we are unmounting, flush any unused caps immediately. */
+	if (mdsc->stopping)
+		is_delayed = 1;
+
+	spin_lock(&inode->i_lock);
+
+	if (ci->i_ceph_flags & CEPH_I_FLUSH)
+		flags |= CHECK_CAPS_FLUSH;
+
+	/* flush snaps first time around only */
+	if (!list_empty(&ci->i_cap_snaps))
+		__ceph_flush_snaps(ci, &session);
+	goto retry_locked;
+retry:
+	spin_lock(&inode->i_lock);
+retry_locked:
+	file_wanted = __ceph_caps_file_wanted(ci);
+	used = __ceph_caps_used(ci);
+	want = file_wanted | used;
+	issued = __ceph_caps_issued(ci, &implemented);
+	revoking = implemented & ~issued;
+
+	retain = want | CEPH_CAP_PIN;
+	if (!mdsc->stopping && inode->i_nlink > 0) {
+		if (want) {
+			retain |= CEPH_CAP_ANY;       /* be greedy */
+		} else {
+			retain |= CEPH_CAP_ANY_SHARED;
+			/*
+			 * keep RD only if we didn't have the file open RW,
+			 * because then the mds would revoke it anyway to
+			 * journal max_size=0.
+			 */
+			if (ci->i_max_size == 0)
+				retain |= CEPH_CAP_ANY_RD;
+		}
+	}
+
+	dout("check_caps %p file_want %s used %s dirty %s flushing %s"
+	     " issued %s revoking %s retain %s %s%s%s\n", inode,
+	     ceph_cap_string(file_wanted),
+	     ceph_cap_string(used), ceph_cap_string(ci->i_dirty_caps),
+	     ceph_cap_string(ci->i_flushing_caps),
+	     ceph_cap_string(issued), ceph_cap_string(revoking),
+	     ceph_cap_string(retain),
+	     (flags & CHECK_CAPS_AUTHONLY) ? " AUTHONLY" : "",
+	     (flags & CHECK_CAPS_NODELAY) ? " NODELAY" : "",
+	     (flags & CHECK_CAPS_FLUSH) ? " FLUSH" : "");
+
+	/*
+	 * If we no longer need to hold onto old our caps, and we may
+	 * have cached pages, but don't want them, then try to invalidate.
+	 * If we fail, it's because pages are locked.... try again later.
+	 */
+	if ((!is_delayed || mdsc->stopping) &&
+	    ci->i_wrbuffer_ref == 0 &&               /* no dirty pages... */
+	    ci->i_rdcache_gen &&                     /* may have cached pages */
+	    (file_wanted == 0 ||                     /* no open files */
+	     (revoking & CEPH_CAP_FILE_CACHE)) &&     /*  or revoking cache */
+	    !tried_invalidate) {
+		dout("check_caps trying to invalidate on %p\n", inode);
+		if (try_nonblocking_invalidate(inode) < 0) {
+			if (revoking & CEPH_CAP_FILE_CACHE) {
+				dout("check_caps queuing invalidate\n");
+				queue_invalidate = 1;
+				ci->i_rdcache_revoking = ci->i_rdcache_gen;
+			} else {
+				dout("check_caps failed to invalidate pages\n");
+				/* we failed to invalidate pages.  check these
+				   caps again later. */
+				force_requeue = 1;
+				__cap_set_timeouts(mdsc, ci);
+			}
+		}
+		tried_invalidate = 1;
+		goto retry_locked;
+	}
+
+	num = 0;
+	for (p = rb_first(&ci->i_caps); p; p = rb_next(p)) {
+		cap = rb_entry(p, struct ceph_cap, ci_node);
+		num++;
+
+		/* avoid looping forever */
+		if (mds >= cap->mds ||
+		    ((flags & CHECK_CAPS_AUTHONLY) && cap != ci->i_auth_cap))
+			continue;
+
+		/* NOTE: no side-effects allowed, until we take s_mutex */
+
+		revoking = cap->implemented & ~cap->issued;
+		if (revoking)
+			dout(" mds%d revoking %s\n", cap->mds,
+			     ceph_cap_string(revoking));
+
+		if (cap == ci->i_auth_cap &&
+		    (cap->issued & CEPH_CAP_FILE_WR)) {
+			/* request larger max_size from MDS? */
+			if (ci->i_wanted_max_size > ci->i_max_size &&
+			    ci->i_wanted_max_size > ci->i_requested_max_size) {
+				dout("requesting new max_size\n");
+				goto ack;
+			}
+
+			/* approaching file_max? */
+			if ((inode->i_size << 1) >= ci->i_max_size &&
+			    (ci->i_reported_size << 1) < ci->i_max_size) {
+				dout("i_size approaching max_size\n");
+				goto ack;
+			}
+		}
+		/* flush anything dirty? */
+		if (cap == ci->i_auth_cap && (flags & CHECK_CAPS_FLUSH) &&
+		    ci->i_dirty_caps) {
+			dout("flushing dirty caps\n");
+			goto ack;
+		}
+
+		/* completed revocation? going down and there are no caps? */
+		if (revoking && (revoking & used) == 0) {
+			dout("completed revocation of %s\n",
+			     ceph_cap_string(cap->implemented & ~cap->issued));
+			goto ack;
+		}
+
+		/* want more caps from mds? */
+		if (want & ~(cap->mds_wanted | cap->issued))
+			goto ack;
+
+		/* things we might delay */
+		if ((cap->issued & ~retain) == 0 &&
+		    cap->mds_wanted == want)
+			continue;     /* nope, all good */
+
+		if (is_delayed)
+			goto ack;
+
+		/* delay? */
+		if ((ci->i_ceph_flags & CEPH_I_NODELAY) == 0 &&
+		    time_before(jiffies, ci->i_hold_caps_max)) {
+			dout(" delaying issued %s -> %s, wanted %s -> %s\n",
+			     ceph_cap_string(cap->issued),
+			     ceph_cap_string(cap->issued & retain),
+			     ceph_cap_string(cap->mds_wanted),
+			     ceph_cap_string(want));
+			delayed++;
+			continue;
+		}
+
+ack:
+		if (ci->i_ceph_flags & CEPH_I_NOFLUSH) {
+			dout(" skipping %p I_NOFLUSH set\n", inode);
+			continue;
+		}
+
+		if (session && session != cap->session) {
+			dout("oops, wrong session %p mutex\n", session);
+			mutex_unlock(&session->s_mutex);
+			session = NULL;
+		}
+		if (!session) {
+			session = cap->session;
+			if (mutex_trylock(&session->s_mutex) == 0) {
+				dout("inverting session/ino locks on %p\n",
+				     session);
+				spin_unlock(&inode->i_lock);
+				if (took_snap_rwsem) {
+					up_read(&mdsc->snap_rwsem);
+					took_snap_rwsem = 0;
+				}
+				mutex_lock(&session->s_mutex);
+				goto retry;
+			}
+		}
+		/* take snap_rwsem after session mutex */
+		if (!took_snap_rwsem) {
+			if (down_read_trylock(&mdsc->snap_rwsem) == 0) {
+				dout("inverting snap/in locks on %p\n",
+				     inode);
+				spin_unlock(&inode->i_lock);
+				down_read(&mdsc->snap_rwsem);
+				took_snap_rwsem = 1;
+				goto retry;
+			}
+			took_snap_rwsem = 1;
+		}
+
+		if (cap == ci->i_auth_cap && ci->i_dirty_caps)
+			flushing = __mark_caps_flushing(inode, session);
+
+		mds = cap->mds;  /* remember mds, so we don't repeat */
+		sent++;
+
+		/* __send_cap drops i_lock */
+		delayed += __send_cap(mdsc, cap, CEPH_CAP_OP_UPDATE, used, want,
+				      retain, flushing, NULL);
+		goto retry; /* retake i_lock and restart our cap scan. */
+	}
+
+	/*
+	 * Reschedule delayed caps release if we delayed anything,
+	 * otherwise cancel.
+	 */
+	if (delayed && is_delayed)
+		force_requeue = 1;   /* __send_cap delayed release; requeue */
+	if (!delayed && !is_delayed)
+		__cap_delay_cancel(mdsc, ci);
+	else if (!is_delayed || force_requeue)
+		__cap_delay_requeue(mdsc, ci);
+
+	spin_unlock(&inode->i_lock);
+
+	if (queue_invalidate)
+		ceph_queue_invalidate(inode);
+
+	if (session && drop_session_lock)
+		mutex_unlock(&session->s_mutex);
+	if (took_snap_rwsem)
+		up_read(&mdsc->snap_rwsem);
+}
+
+/*
+ * Try to flush dirty caps back to the auth mds.
+ */
+static int try_flush_caps(struct inode *inode, struct ceph_mds_session *session,
+			  unsigned *flush_tid)
+{
+	struct ceph_mds_client *mdsc = &ceph_client(inode->i_sb)->mdsc;
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	int unlock_session = session ? 0 : 1;
+	int flushing = 0;
+
+retry:
+	spin_lock(&inode->i_lock);
+	if (ci->i_ceph_flags & CEPH_I_NOFLUSH) {
+		dout("try_flush_caps skipping %p I_NOFLUSH set\n", inode);
+		goto out;
+	}
+	if (ci->i_dirty_caps && ci->i_auth_cap) {
+		struct ceph_cap *cap = ci->i_auth_cap;
+		int used = __ceph_caps_used(ci);
+		int want = __ceph_caps_wanted(ci);
+		int delayed;
+
+		if (!session) {
+			spin_unlock(&inode->i_lock);
+			session = cap->session;
+			mutex_lock(&session->s_mutex);
+			goto retry;
+		}
+		BUG_ON(session != cap->session);
+		if (cap->session->s_state < CEPH_MDS_SESSION_OPEN)
+			goto out;
+
+		flushing = __mark_caps_flushing(inode, session);
+
+		/* __send_cap drops i_lock */
+		delayed = __send_cap(mdsc, cap, CEPH_CAP_OP_FLUSH, used, want,
+				     cap->issued | cap->implemented, flushing,
+				     flush_tid);
+		if (!delayed)
+			goto out_unlocked;
+
+		spin_lock(&inode->i_lock);
+		__cap_delay_requeue(mdsc, ci);
+	}
+out:
+	spin_unlock(&inode->i_lock);
+out_unlocked:
+	if (session && unlock_session)
+		mutex_unlock(&session->s_mutex);
+	return flushing;
+}
+
+/*
+ * Return true if we've flushed caps through the given flush_tid.
+ */
+static int caps_are_flushed(struct inode *inode, unsigned tid)
+{
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	int dirty, i, ret = 1;
+
+	spin_lock(&inode->i_lock);
+	dirty = __ceph_caps_dirty(ci);
+	for (i = 0; i < CEPH_CAP_BITS; i++)
+		if ((ci->i_flushing_caps & (1 << i)) &&
+		    ci->i_cap_flush_tid[i] <= tid) {
+			/* still flushing this bit */
+			ret = 0;
+			break;
+		}
+	spin_unlock(&inode->i_lock);
+	return ret;
+}
+
+/*
+ * Wait on any unsafe replies for the given inode.  First wait on the
+ * newest request, and make that the upper bound.  Then, if there are
+ * more requests, keep waiting on the oldest as long as it is still older
+ * than the original request.
+ */
+static void sync_write_wait(struct inode *inode)
+{
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	struct list_head *head = &ci->i_unsafe_writes;
+	struct ceph_osd_request *req;
+	u64 last_tid;
+
+	spin_lock(&ci->i_unsafe_lock);
+	if (list_empty(head))
+		goto out;
+
+	/* set upper bound as _last_ entry in chain */
+	req = list_entry(head->prev, struct ceph_osd_request,
+			 r_unsafe_item);
+	last_tid = req->r_tid;
+
+	do {
+		ceph_osdc_get_request(req);
+		spin_unlock(&ci->i_unsafe_lock);
+		dout("sync_write_wait on tid %llu (until %llu)\n",
+		     req->r_tid, last_tid);
+		wait_for_completion(&req->r_safe_completion);
+		spin_lock(&ci->i_unsafe_lock);
+		ceph_osdc_put_request(req);
+
+		/*
+		 * from here on look at first entry in chain, since we
+		 * only want to wait for anything older than last_tid
+		 */
+		if (list_empty(head))
+			break;
+		req = list_entry(head->next, struct ceph_osd_request,
+				 r_unsafe_item);
+	} while (req->r_tid < last_tid);
+out:
+	spin_unlock(&ci->i_unsafe_lock);
+}
+
+int ceph_fsync(struct file *file, struct dentry *dentry, int datasync)
+{
+	struct inode *inode = dentry->d_inode;
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	unsigned flush_tid;
+	int ret;
+	int dirty;
+
+	dout("fsync %p%s\n", inode, datasync ? " datasync" : "");
+	sync_write_wait(inode);
+
+	ret = filemap_write_and_wait(inode->i_mapping);
+	if (ret < 0)
+		return ret;
+
+	dirty = try_flush_caps(inode, NULL, &flush_tid);
+	dout("fsync dirty caps are %s\n", ceph_cap_string(dirty));
+
+	/*
+	 * only wait on non-file metadata writeback (the mds
+	 * can recover size and mtime, so we don't need to
+	 * wait for that)
+	 */
+	if (!datasync && (dirty & ~CEPH_CAP_ANY_FILE_WR)) {
+		dout("fsync waiting for flush_tid %u\n", flush_tid);
+		ret = wait_event_interruptible(ci->i_cap_wq,
+				       caps_are_flushed(inode, flush_tid));
+	}
+
+	dout("fsync %p%s done\n", inode, datasync ? " datasync" : "");
+	return ret;
+}
+
+/*
+ * Flush any dirty caps back to the mds.  If we aren't asked to wait,
+ * queue inode for flush but don't do so immediately, because we can
+ * get by with fewer MDS messages if we wait for data writeback to
+ * complete first.
+ */
+int ceph_write_inode(struct inode *inode, struct writeback_control *wbc)
+{
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	unsigned flush_tid;
+	int err = 0;
+	int dirty;
+	int wait = wbc->sync_mode == WB_SYNC_ALL;
+
+	dout("write_inode %p wait=%d\n", inode, wait);
+	if (wait) {
+		dirty = try_flush_caps(inode, NULL, &flush_tid);
+		if (dirty)
+			err = wait_event_interruptible(ci->i_cap_wq,
+				       caps_are_flushed(inode, flush_tid));
+	} else {
+		struct ceph_mds_client *mdsc = &ceph_client(inode->i_sb)->mdsc;
+
+		spin_lock(&inode->i_lock);
+		if (__ceph_caps_dirty(ci))
+			__cap_delay_requeue_front(mdsc, ci);
+		spin_unlock(&inode->i_lock);
+	}
+	return err;
+}
+
+/*
+ * After a recovering MDS goes active, we need to resend any caps
+ * we were flushing.
+ *
+ * Caller holds session->s_mutex.
+ */
+static void kick_flushing_capsnaps(struct ceph_mds_client *mdsc,
+				   struct ceph_mds_session *session)
+{
+	struct ceph_cap_snap *capsnap;
+
+	dout("kick_flushing_capsnaps mds%d\n", session->s_mds);
+	list_for_each_entry(capsnap, &session->s_cap_snaps_flushing,
+			    flushing_item) {
+		struct ceph_inode_info *ci = capsnap->ci;
+		struct inode *inode = &ci->vfs_inode;
+		struct ceph_cap *cap;
+
+		spin_lock(&inode->i_lock);
+		cap = ci->i_auth_cap;
+		if (cap && cap->session == session) {
+			dout("kick_flushing_caps %p cap %p capsnap %p\n", inode,
+			     cap, capsnap);
+			__ceph_flush_snaps(ci, &session);
+		} else {
+			pr_err("%p auth cap %p not mds%d ???\n", inode,
+			       cap, session->s_mds);
+			spin_unlock(&inode->i_lock);
+		}
+	}
+}
+
+void ceph_kick_flushing_caps(struct ceph_mds_client *mdsc,
+			     struct ceph_mds_session *session)
+{
+	struct ceph_inode_info *ci;
+
+	kick_flushing_capsnaps(mdsc, session);
+
+	dout("kick_flushing_caps mds%d\n", session->s_mds);
+	list_for_each_entry(ci, &session->s_cap_flushing, i_flushing_item) {
+		struct inode *inode = &ci->vfs_inode;
+		struct ceph_cap *cap;
+		int delayed = 0;
+
+		spin_lock(&inode->i_lock);
+		cap = ci->i_auth_cap;
+		if (cap && cap->session == session) {
+			dout("kick_flushing_caps %p cap %p %s\n", inode,
+			     cap, ceph_cap_string(ci->i_flushing_caps));
+			delayed = __send_cap(mdsc, cap, CEPH_CAP_OP_FLUSH,
+					     __ceph_caps_used(ci),
+					     __ceph_caps_wanted(ci),
+					     cap->issued | cap->implemented,
+					     ci->i_flushing_caps, NULL);
+			if (delayed) {
+				spin_lock(&inode->i_lock);
+				__cap_delay_requeue(mdsc, ci);
+				spin_unlock(&inode->i_lock);
+			}
+		} else {
+			pr_err("%p auth cap %p not mds%d ???\n", inode,
+			       cap, session->s_mds);
+			spin_unlock(&inode->i_lock);
+		}
+	}
+}
+
+
+/*
+ * Take references to capabilities we hold, so that we don't release
+ * them to the MDS prematurely.
+ *
+ * Protected by i_lock.
+ */
+static void __take_cap_refs(struct ceph_inode_info *ci, int got)
+{
+	if (got & CEPH_CAP_PIN)
+		ci->i_pin_ref++;
+	if (got & CEPH_CAP_FILE_RD)
+		ci->i_rd_ref++;
+	if (got & CEPH_CAP_FILE_CACHE)
+		ci->i_rdcache_ref++;
+	if (got & CEPH_CAP_FILE_WR)
+		ci->i_wr_ref++;
+	if (got & CEPH_CAP_FILE_BUFFER) {
+		if (ci->i_wrbuffer_ref == 0)
+			igrab(&ci->vfs_inode);
+		ci->i_wrbuffer_ref++;
+		dout("__take_cap_refs %p wrbuffer %d -> %d (?)\n",
+		     &ci->vfs_inode, ci->i_wrbuffer_ref-1, ci->i_wrbuffer_ref);
+	}
+}
+
+/*
+ * Try to grab cap references.  Specify those refs we @want, and the
+ * minimal set we @need.  Also include the larger offset we are writing
+ * to (when applicable), and check against max_size here as well.
+ * Note that caller is responsible for ensuring max_size increases are
+ * requested from the MDS.
+ */
+static int try_get_cap_refs(struct ceph_inode_info *ci, int need, int want,
+			    int *got, loff_t endoff, int *check_max, int *err)
+{
+	struct inode *inode = &ci->vfs_inode;
+	int ret = 0;
+	int have, implemented;
+	int file_wanted;
+
+	dout("get_cap_refs %p need %s want %s\n", inode,
+	     ceph_cap_string(need), ceph_cap_string(want));
+	spin_lock(&inode->i_lock);
+
+	/* make sure file is actually open */
+	file_wanted = __ceph_caps_file_wanted(ci);
+	if ((file_wanted & need) == 0) {
+		dout("try_get_cap_refs need %s file_wanted %s, EBADF\n",
+		     ceph_cap_string(need), ceph_cap_string(file_wanted));
+		*err = -EBADF;
+		ret = 1;
+		goto out;
+	}
+
+	if (need & CEPH_CAP_FILE_WR) {
+		if (endoff >= 0 && endoff > (loff_t)ci->i_max_size) {
+			dout("get_cap_refs %p endoff %llu > maxsize %llu\n",
+			     inode, endoff, ci->i_max_size);
+			if (endoff > ci->i_wanted_max_size) {
+				*check_max = 1;
+				ret = 1;
+			}
+			goto out;
+		}
+		/*
+		 * If a sync write is in progress, we must wait, so that we
+		 * can get a final snapshot value for size+mtime.
+		 */
+		if (__ceph_have_pending_cap_snap(ci)) {
+			dout("get_cap_refs %p cap_snap_pending\n", inode);
+			goto out;
+		}
+	}
+	have = __ceph_caps_issued(ci, &implemented);
+
+	/*
+	 * disallow writes while a truncate is pending
+	 */
+	if (ci->i_truncate_pending)
+		have &= ~CEPH_CAP_FILE_WR;
+
+	if ((have & need) == need) {
+		/*
+		 * Look at (implemented & ~have & not) so that we keep waiting
+		 * on transition from wanted -> needed caps.  This is needed
+		 * for WRBUFFER|WR -> WR to avoid a new WR sync write from
+		 * going before a prior buffered writeback happens.
+		 */
+		int not = want & ~(have & need);
+		int revoking = implemented & ~have;
+		dout("get_cap_refs %p have %s but not %s (revoking %s)\n",
+		     inode, ceph_cap_string(have), ceph_cap_string(not),
+		     ceph_cap_string(revoking));
+		if ((revoking & not) == 0) {
+			*got = need | (have & want);
+			__take_cap_refs(ci, *got);
+			ret = 1;
+		}
+	} else {
+		dout("get_cap_refs %p have %s needed %s\n", inode,
+		     ceph_cap_string(have), ceph_cap_string(need));
+	}
+out:
+	spin_unlock(&inode->i_lock);
+	dout("get_cap_refs %p ret %d got %s\n", inode,
+	     ret, ceph_cap_string(*got));
+	return ret;
+}
+
+/*
+ * Check the offset we are writing up to against our current
+ * max_size.  If necessary, tell the MDS we want to write to
+ * a larger offset.
+ */
+static void check_max_size(struct inode *inode, loff_t endoff)
+{
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	int check = 0;
+
+	/* do we need to explicitly request a larger max_size? */
+	spin_lock(&inode->i_lock);
+	if ((endoff >= ci->i_max_size ||
+	     endoff > (inode->i_size << 1)) &&
+	    endoff > ci->i_wanted_max_size) {
+		dout("write %p at large endoff %llu, req max_size\n",
+		     inode, endoff);
+		ci->i_wanted_max_size = endoff;
+		check = 1;
+	}
+	spin_unlock(&inode->i_lock);
+	if (check)
+		ceph_check_caps(ci, CHECK_CAPS_AUTHONLY, NULL);
+}
+
+/*
+ * Wait for caps, and take cap references.  If we can't get a WR cap
+ * due to a small max_size, make sure we check_max_size (and possibly
+ * ask the mds) so we don't get hung up indefinitely.
+ */
+int ceph_get_caps(struct ceph_inode_info *ci, int need, int want, int *got,
+		  loff_t endoff)
+{
+	int check_max, ret, err;
+
+retry:
+	if (endoff > 0)
+		check_max_size(&ci->vfs_inode, endoff);
+	check_max = 0;
+	err = 0;
+	ret = wait_event_interruptible(ci->i_cap_wq,
+				       try_get_cap_refs(ci, need, want,
+							got, endoff,
+							&check_max, &err));
+	if (err)
+		ret = err;
+	if (check_max)
+		goto retry;
+	return ret;
+}
+
+/*
+ * Take cap refs.  Caller must already know we hold at least one ref
+ * on the caps in question or we don't know this is safe.
+ */
+void ceph_get_cap_refs(struct ceph_inode_info *ci, int caps)
+{
+	spin_lock(&ci->vfs_inode.i_lock);
+	__take_cap_refs(ci, caps);
+	spin_unlock(&ci->vfs_inode.i_lock);
+}
+
+/*
+ * Release cap refs.
+ *
+ * If we released the last ref on any given cap, call ceph_check_caps
+ * to release (or schedule a release).
+ *
+ * If we are releasing a WR cap (from a sync write), finalize any affected
+ * cap_snap, and wake up any waiters.
+ */
+void ceph_put_cap_refs(struct ceph_inode_info *ci, int had)
+{
+	struct inode *inode = &ci->vfs_inode;
+	int last = 0, put = 0, flushsnaps = 0, wake = 0;
+	struct ceph_cap_snap *capsnap;
+
+	spin_lock(&inode->i_lock);
+	if (had & CEPH_CAP_PIN)
+		--ci->i_pin_ref;
+	if (had & CEPH_CAP_FILE_RD)
+		if (--ci->i_rd_ref == 0)
+			last++;
+	if (had & CEPH_CAP_FILE_CACHE)
+		if (--ci->i_rdcache_ref == 0)
+			last++;
+	if (had & CEPH_CAP_FILE_BUFFER) {
+		if (--ci->i_wrbuffer_ref == 0) {
+			last++;
+			put++;
+		}
+		dout("put_cap_refs %p wrbuffer %d -> %d (?)\n",
+		     inode, ci->i_wrbuffer_ref+1, ci->i_wrbuffer_ref);
+	}
+	if (had & CEPH_CAP_FILE_WR)
+		if (--ci->i_wr_ref == 0) {
+			last++;
+			if (!list_empty(&ci->i_cap_snaps)) {
+				capsnap = list_first_entry(&ci->i_cap_snaps,
+						     struct ceph_cap_snap,
+						     ci_item);
+				if (capsnap->writing) {
+					capsnap->writing = 0;
+					flushsnaps =
+						__ceph_finish_cap_snap(ci,
+								       capsnap);
+					wake = 1;
+				}
+			}
+		}
+	spin_unlock(&inode->i_lock);
+
+	dout("put_cap_refs %p had %s %s\n", inode, ceph_cap_string(had),
+	     last ? "last" : "");
+
+	if (last && !flushsnaps)
+		ceph_check_caps(ci, 0, NULL);
+	else if (flushsnaps)
+		ceph_flush_snaps(ci);
+	if (wake)
+		wake_up(&ci->i_cap_wq);
+	if (put)
+		iput(inode);
+}
+
+/*
+ * Release @nr WRBUFFER refs on dirty pages for the given @snapc snap
+ * context.  Adjust per-snap dirty page accounting as appropriate.
+ * Once all dirty data for a cap_snap is flushed, flush snapped file
+ * metadata back to the MDS.  If we dropped the last ref, call
+ * ceph_check_caps.
+ */
+void ceph_put_wrbuffer_cap_refs(struct ceph_inode_info *ci, int nr,
+				struct ceph_snap_context *snapc)
+{
+	struct inode *inode = &ci->vfs_inode;
+	int last = 0;
+	int last_snap = 0;
+	int found = 0;
+	struct ceph_cap_snap *capsnap = NULL;
+
+	spin_lock(&inode->i_lock);
+	ci->i_wrbuffer_ref -= nr;
+	last = !ci->i_wrbuffer_ref;
+
+	if (ci->i_head_snapc == snapc) {
+		ci->i_wrbuffer_ref_head -= nr;
+		if (!ci->i_wrbuffer_ref_head) {
+			ceph_put_snap_context(ci->i_head_snapc);
+			ci->i_head_snapc = NULL;
+		}
+		dout("put_wrbuffer_cap_refs on %p head %d/%d -> %d/%d %s\n",
+		     inode,
+		     ci->i_wrbuffer_ref+nr, ci->i_wrbuffer_ref_head+nr,
+		     ci->i_wrbuffer_ref, ci->i_wrbuffer_ref_head,
+		     last ? " LAST" : "");
+	} else {
+		list_for_each_entry(capsnap, &ci->i_cap_snaps, ci_item) {
+			if (capsnap->context == snapc) {
+				found = 1;
+				capsnap->dirty_pages -= nr;
+				last_snap = !capsnap->dirty_pages;
+				break;
+			}
+		}
+		BUG_ON(!found);
+		dout("put_wrbuffer_cap_refs on %p cap_snap %p "
+		     " snap %lld %d/%d -> %d/%d %s%s\n",
+		     inode, capsnap, capsnap->context->seq,
+		     ci->i_wrbuffer_ref+nr, capsnap->dirty_pages + nr,
+		     ci->i_wrbuffer_ref, capsnap->dirty_pages,
+		     last ? " (wrbuffer last)" : "",
+		     last_snap ? " (capsnap last)" : "");
+	}
+
+	spin_unlock(&inode->i_lock);
+
+	if (last) {
+		ceph_check_caps(ci, CHECK_CAPS_AUTHONLY, NULL);
+		iput(inode);
+	} else if (last_snap) {
+		ceph_flush_snaps(ci);
+		wake_up(&ci->i_cap_wq);
+	}
+}
+
+/*
+ * Handle a cap GRANT message from the MDS.  (Note that a GRANT may
+ * actually be a revocation if it specifies a smaller cap set.)
+ *
+ * caller holds s_mutex.
+ * return value:
+ *  0 - ok
+ *  1 - check_caps on auth cap only (writeback)
+ *  2 - check_caps (ack revoke)
+ */
+static int handle_cap_grant(struct inode *inode, struct ceph_mds_caps *grant,
+			    struct ceph_mds_session *session,
+			    struct ceph_cap *cap,
+			    struct ceph_buffer *xattr_buf)
+	__releases(inode->i_lock)
+
+{
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	int mds = session->s_mds;
+	int seq = le32_to_cpu(grant->seq);
+	int newcaps = le32_to_cpu(grant->caps);
+	int issued, implemented, used, wanted, dirty;
+	u64 size = le64_to_cpu(grant->size);
+	u64 max_size = le64_to_cpu(grant->max_size);
+	struct timespec mtime, atime, ctime;
+	int reply = 0;
+	int wake = 0;
+	int writeback = 0;
+	int revoked_rdcache = 0;
+	int queue_invalidate = 0;
+
+	dout("handle_cap_grant inode %p cap %p mds%d seq %d %s\n",
+	     inode, cap, mds, seq, ceph_cap_string(newcaps));
+	dout(" size %llu max_size %llu, i_size %llu\n", size, max_size,
+		inode->i_size);
+
+	/*
+	 * If CACHE is being revoked, and we have no dirty buffers,
+	 * try to invalidate (once).  (If there are dirty buffers, we
+	 * will invalidate _after_ writeback.)
+	 */
+	if (((cap->issued & ~newcaps) & CEPH_CAP_FILE_CACHE) &&
+	    !ci->i_wrbuffer_ref) {
+		if (try_nonblocking_invalidate(inode) == 0) {
+			revoked_rdcache = 1;
+		} else {
+			/* there were locked pages.. invalidate later
+			   in a separate thread. */
+			if (ci->i_rdcache_revoking != ci->i_rdcache_gen) {
+				queue_invalidate = 1;
+				ci->i_rdcache_revoking = ci->i_rdcache_gen;
+			}
+		}
+	}
+
+	/* side effects now are allowed */
+
+	issued = __ceph_caps_issued(ci, &implemented);
+	issued |= implemented | __ceph_caps_dirty(ci);
+
+	cap->cap_gen = session->s_cap_gen;
+
+	__check_cap_issue(ci, cap, newcaps);
+
+	if ((issued & CEPH_CAP_AUTH_EXCL) == 0) {
+		inode->i_mode = le32_to_cpu(grant->mode);
+		inode->i_uid = le32_to_cpu(grant->uid);
+		inode->i_gid = le32_to_cpu(grant->gid);
+		dout("%p mode 0%o uid.gid %d.%d\n", inode, inode->i_mode,
+		     inode->i_uid, inode->i_gid);
+	}
+
+	if ((issued & CEPH_CAP_LINK_EXCL) == 0)
+		inode->i_nlink = le32_to_cpu(grant->nlink);
+
+	if ((issued & CEPH_CAP_XATTR_EXCL) == 0 && grant->xattr_len) {
+		int len = le32_to_cpu(grant->xattr_len);
+		u64 version = le64_to_cpu(grant->xattr_version);
+
+		if (version > ci->i_xattrs.version) {
+			dout(" got new xattrs v%llu on %p len %d\n",
+			     version, inode, len);
+			if (ci->i_xattrs.blob)
+				ceph_buffer_put(ci->i_xattrs.blob);
+			ci->i_xattrs.blob = ceph_buffer_get(xattr_buf);
+			ci->i_xattrs.version = version;
+		}
+	}
+
+	/* size/ctime/mtime/atime? */
+	ceph_fill_file_size(inode, issued,
+			    le32_to_cpu(grant->truncate_seq),
+			    le64_to_cpu(grant->truncate_size), size);
+	ceph_decode_timespec(&mtime, &grant->mtime);
+	ceph_decode_timespec(&atime, &grant->atime);
+	ceph_decode_timespec(&ctime, &grant->ctime);
+	ceph_fill_file_time(inode, issued,
+			    le32_to_cpu(grant->time_warp_seq), &ctime, &mtime,
+			    &atime);
+
+	/* max size increase? */
+	if (max_size != ci->i_max_size) {
+		dout("max_size %lld -> %llu\n", ci->i_max_size, max_size);
+		ci->i_max_size = max_size;
+		if (max_size >= ci->i_wanted_max_size) {
+			ci->i_wanted_max_size = 0;  /* reset */
+			ci->i_requested_max_size = 0;
+		}
+		wake = 1;
+	}
+
+	/* check cap bits */
+	wanted = __ceph_caps_wanted(ci);
+	used = __ceph_caps_used(ci);
+	dirty = __ceph_caps_dirty(ci);
+	dout(" my wanted = %s, used = %s, dirty %s\n",
+	     ceph_cap_string(wanted),
+	     ceph_cap_string(used),
+	     ceph_cap_string(dirty));
+	if (wanted != le32_to_cpu(grant->wanted)) {
+		dout("mds wanted %s -> %s\n",
+		     ceph_cap_string(le32_to_cpu(grant->wanted)),
+		     ceph_cap_string(wanted));
+		grant->wanted = cpu_to_le32(wanted);
+	}
+
+	cap->seq = seq;
+
+	/* file layout may have changed */
+	ci->i_layout = grant->layout;
+
+	/* revocation, grant, or no-op? */
+	if (cap->issued & ~newcaps) {
+		dout("revocation: %s -> %s\n", ceph_cap_string(cap->issued),
+		     ceph_cap_string(newcaps));
+		if ((used & ~newcaps) & CEPH_CAP_FILE_BUFFER)
+			writeback = 1; /* will delay ack */
+		else if (dirty & ~newcaps)
+			reply = 1;     /* initiate writeback in check_caps */
+		else if (((used & ~newcaps) & CEPH_CAP_FILE_CACHE) == 0 ||
+			   revoked_rdcache)
+			reply = 2;     /* send revoke ack in check_caps */
+		cap->issued = newcaps;
+	} else if (cap->issued == newcaps) {
+		dout("caps unchanged: %s -> %s\n",
+		     ceph_cap_string(cap->issued), ceph_cap_string(newcaps));
+	} else {
+		dout("grant: %s -> %s\n", ceph_cap_string(cap->issued),
+		     ceph_cap_string(newcaps));
+		cap->issued = newcaps;
+		cap->implemented |= newcaps; /* add bits only, to
+					      * avoid stepping on a
+					      * pending revocation */
+		wake = 1;
+	}
+
+	spin_unlock(&inode->i_lock);
+	if (writeback)
+		/*
+		 * queue inode for writeback: we can't actually call
+		 * filemap_write_and_wait, etc. from message handler
+		 * context.
+		 */
+		ceph_queue_writeback(inode);
+	if (queue_invalidate)
+		ceph_queue_invalidate(inode);
+	if (wake)
+		wake_up(&ci->i_cap_wq);
+	return reply;
+}
+
+/*
+ * Handle FLUSH_ACK from MDS, indicating that metadata we sent to the
+ * MDS has been safely committed.
+ */
+static void handle_cap_flush_ack(struct inode *inode, u64 flush_tid,
+				 struct ceph_mds_caps *m,
+				 struct ceph_mds_session *session,
+				 struct ceph_cap *cap)
+	__releases(inode->i_lock)
+{
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	struct ceph_mds_client *mdsc = &ceph_client(inode->i_sb)->mdsc;
+	unsigned seq = le32_to_cpu(m->seq);
+	int dirty = le32_to_cpu(m->dirty);
+	int cleaned = 0;
+	int drop = 0;
+	int i;
+
+	for (i = 0; i < CEPH_CAP_BITS; i++)
+		if ((dirty & (1 << i)) &&
+		    flush_tid == ci->i_cap_flush_tid[i])
+			cleaned |= 1 << i;
+
+	dout("handle_cap_flush_ack inode %p mds%d seq %d on %s cleaned %s,"
+	     " flushing %s -> %s\n",
+	     inode, session->s_mds, seq, ceph_cap_string(dirty),
+	     ceph_cap_string(cleaned), ceph_cap_string(ci->i_flushing_caps),
+	     ceph_cap_string(ci->i_flushing_caps & ~cleaned));
+
+	if (ci->i_flushing_caps == (ci->i_flushing_caps & ~cleaned))
+		goto out;
+
+	ci->i_flushing_caps &= ~cleaned;
+
+	spin_lock(&mdsc->cap_dirty_lock);
+	if (ci->i_flushing_caps == 0) {
+		list_del_init(&ci->i_flushing_item);
+		if (!list_empty(&session->s_cap_flushing))
+			dout(" mds%d still flushing cap on %p\n",
+			     session->s_mds,
+			     &list_entry(session->s_cap_flushing.next,
+					 struct ceph_inode_info,
+					 i_flushing_item)->vfs_inode);
+		mdsc->num_cap_flushing--;
+		wake_up(&mdsc->cap_flushing_wq);
+		dout(" inode %p now !flushing\n", inode);
+
+		if (ci->i_dirty_caps == 0) {
+			dout(" inode %p now clean\n", inode);
+			BUG_ON(!list_empty(&ci->i_dirty_item));
+			drop = 1;
+		} else {
+			BUG_ON(list_empty(&ci->i_dirty_item));
+		}
+	}
+	spin_unlock(&mdsc->cap_dirty_lock);
+	wake_up(&ci->i_cap_wq);
+
+out:
+	spin_unlock(&inode->i_lock);
+	if (drop)
+		iput(inode);
+}
+
+/*
+ * Handle FLUSHSNAP_ACK.  MDS has flushed snap data to disk and we can
+ * throw away our cap_snap.
+ *
+ * Caller hold s_mutex.
+ */
+static void handle_cap_flushsnap_ack(struct inode *inode, u64 flush_tid,
+				     struct ceph_mds_caps *m,
+				     struct ceph_mds_session *session)
+{
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	u64 follows = le64_to_cpu(m->snap_follows);
+	struct ceph_cap_snap *capsnap;
+	int drop = 0;
+
+	dout("handle_cap_flushsnap_ack inode %p ci %p mds%d follows %lld\n",
+	     inode, ci, session->s_mds, follows);
+
+	spin_lock(&inode->i_lock);
+	list_for_each_entry(capsnap, &ci->i_cap_snaps, ci_item) {
+		if (capsnap->follows == follows) {
+			if (capsnap->flush_tid != flush_tid) {
+				dout(" cap_snap %p follows %lld tid %lld !="
+				     " %lld\n", capsnap, follows,
+				     flush_tid, capsnap->flush_tid);
+				break;
+			}
+			WARN_ON(capsnap->dirty_pages || capsnap->writing);
+			dout(" removing cap_snap %p follows %lld\n",
+			     capsnap, follows);
+			ceph_put_snap_context(capsnap->context);
+			list_del(&capsnap->ci_item);
+			list_del(&capsnap->flushing_item);
+			ceph_put_cap_snap(capsnap);
+			drop = 1;
+			break;
+		} else {
+			dout(" skipping cap_snap %p follows %lld\n",
+			     capsnap, capsnap->follows);
+		}
+	}
+	spin_unlock(&inode->i_lock);
+	if (drop)
+		iput(inode);
+}
+
+/*
+ * Handle TRUNC from MDS, indicating file truncation.
+ *
+ * caller hold s_mutex.
+ */
+static void handle_cap_trunc(struct inode *inode,
+			     struct ceph_mds_caps *trunc,
+			     struct ceph_mds_session *session)
+	__releases(inode->i_lock)
+{
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	int mds = session->s_mds;
+	int seq = le32_to_cpu(trunc->seq);
+	u32 truncate_seq = le32_to_cpu(trunc->truncate_seq);
+	u64 truncate_size = le64_to_cpu(trunc->truncate_size);
+	u64 size = le64_to_cpu(trunc->size);
+	int implemented = 0;
+	int dirty = __ceph_caps_dirty(ci);
+	int issued = __ceph_caps_issued(ceph_inode(inode), &implemented);
+	int queue_trunc = 0;
+
+	issued |= implemented | dirty;
+
+	dout("handle_cap_trunc inode %p mds%d seq %d to %lld seq %d\n",
+	     inode, mds, seq, truncate_size, truncate_seq);
+	queue_trunc = ceph_fill_file_size(inode, issued,
+					  truncate_seq, truncate_size, size);
+	spin_unlock(&inode->i_lock);
+
+	if (queue_trunc)
+		ceph_queue_vmtruncate(inode);
+}
+
+/*
+ * Handle EXPORT from MDS.  Cap is being migrated _from_ this mds to a
+ * different one.  If we are the most recent migration we've seen (as
+ * indicated by mseq), make note of the migrating cap bits for the
+ * duration (until we see the corresponding IMPORT).
+ *
+ * caller holds s_mutex
+ */
+static void handle_cap_export(struct inode *inode, struct ceph_mds_caps *ex,
+			      struct ceph_mds_session *session)
+{
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	int mds = session->s_mds;
+	unsigned mseq = le32_to_cpu(ex->migrate_seq);
+	struct ceph_cap *cap = NULL, *t;
+	struct rb_node *p;
+	int remember = 1;
+
+	dout("handle_cap_export inode %p ci %p mds%d mseq %d\n",
+	     inode, ci, mds, mseq);
+
+	spin_lock(&inode->i_lock);
+
+	/* make sure we haven't seen a higher mseq */
+	for (p = rb_first(&ci->i_caps); p; p = rb_next(p)) {
+		t = rb_entry(p, struct ceph_cap, ci_node);
+		if (ceph_seq_cmp(t->mseq, mseq) > 0) {
+			dout(" higher mseq on cap from mds%d\n",
+			     t->session->s_mds);
+			remember = 0;
+		}
+		if (t->session->s_mds == mds)
+			cap = t;
+	}
+
+	if (cap) {
+		if (remember) {
+			/* make note */
+			ci->i_cap_exporting_mds = mds;
+			ci->i_cap_exporting_mseq = mseq;
+			ci->i_cap_exporting_issued = cap->issued;
+		}
+		__ceph_remove_cap(cap);
+	} else {
+		WARN_ON(!cap);
+	}
+
+	spin_unlock(&inode->i_lock);
+}
+
+/*
+ * Handle cap IMPORT.  If there are temp bits from an older EXPORT,
+ * clean them up.
+ *
+ * caller holds s_mutex.
+ */
+static void handle_cap_import(struct ceph_mds_client *mdsc,
+			      struct inode *inode, struct ceph_mds_caps *im,
+			      struct ceph_mds_session *session,
+			      void *snaptrace, int snaptrace_len)
+{
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	int mds = session->s_mds;
+	unsigned issued = le32_to_cpu(im->caps);
+	unsigned wanted = le32_to_cpu(im->wanted);
+	unsigned seq = le32_to_cpu(im->seq);
+	unsigned mseq = le32_to_cpu(im->migrate_seq);
+	u64 realmino = le64_to_cpu(im->realm);
+	u64 cap_id = le64_to_cpu(im->cap_id);
+
+	if (ci->i_cap_exporting_mds >= 0 &&
+	    ceph_seq_cmp(ci->i_cap_exporting_mseq, mseq) < 0) {
+		dout("handle_cap_import inode %p ci %p mds%d mseq %d"
+		     " - cleared exporting from mds%d\n",
+		     inode, ci, mds, mseq,
+		     ci->i_cap_exporting_mds);
+		ci->i_cap_exporting_issued = 0;
+		ci->i_cap_exporting_mseq = 0;
+		ci->i_cap_exporting_mds = -1;
+	} else {
+		dout("handle_cap_import inode %p ci %p mds%d mseq %d\n",
+		     inode, ci, mds, mseq);
+	}
+
+	down_write(&mdsc->snap_rwsem);
+	ceph_update_snap_trace(mdsc, snaptrace, snaptrace+snaptrace_len,
+			       false);
+	downgrade_write(&mdsc->snap_rwsem);
+	ceph_add_cap(inode, session, cap_id, -1,
+		     issued, wanted, seq, mseq, realmino, CEPH_CAP_FLAG_AUTH,
+		     NULL /* no caps context */);
+	try_flush_caps(inode, session, NULL);
+	up_read(&mdsc->snap_rwsem);
+}
+
+/*
+ * Handle a caps message from the MDS.
+ *
+ * Identify the appropriate session, inode, and call the right handler
+ * based on the cap op.
+ */
+void ceph_handle_caps(struct ceph_mds_session *session,
+		      struct ceph_msg *msg)
+{
+	struct ceph_mds_client *mdsc = session->s_mdsc;
+	struct super_block *sb = mdsc->client->sb;
+	struct inode *inode;
+	struct ceph_cap *cap;
+	struct ceph_mds_caps *h;
+	int mds = session->s_mds;
+	int op;
+	u32 seq;
+	struct ceph_vino vino;
+	u64 cap_id;
+	u64 size, max_size;
+	u64 tid;
+	int check_caps = 0;
+	void *snaptrace;
+	int r;
+
+	dout("handle_caps from mds%d\n", mds);
+
+	/* decode */
+	tid = le64_to_cpu(msg->hdr.tid);
+	if (msg->front.iov_len < sizeof(*h))
+		goto bad;
+	h = msg->front.iov_base;
+	snaptrace = h + 1;
+	op = le32_to_cpu(h->op);
+	vino.ino = le64_to_cpu(h->ino);
+	vino.snap = CEPH_NOSNAP;
+	cap_id = le64_to_cpu(h->cap_id);
+	seq = le32_to_cpu(h->seq);
+	size = le64_to_cpu(h->size);
+	max_size = le64_to_cpu(h->max_size);
+
+	mutex_lock(&session->s_mutex);
+	session->s_seq++;
+	dout(" mds%d seq %lld cap seq %u\n", session->s_mds, session->s_seq,
+	     (unsigned)seq);
+
+	/* lookup ino */
+	inode = ceph_find_inode(sb, vino);
+	dout(" op %s ino %llx.%llx inode %p\n", ceph_cap_op_name(op), vino.ino,
+	     vino.snap, inode);
+	if (!inode) {
+		dout(" i don't have ino %llx\n", vino.ino);
+		goto done;
+	}
+
+	/* these will work even if we don't have a cap yet */
+	switch (op) {
+	case CEPH_CAP_OP_FLUSHSNAP_ACK:
+		handle_cap_flushsnap_ack(inode, tid, h, session);
+		goto done;
+
+	case CEPH_CAP_OP_EXPORT:
+		handle_cap_export(inode, h, session);
+		goto done;
+
+	case CEPH_CAP_OP_IMPORT:
+		handle_cap_import(mdsc, inode, h, session,
+				  snaptrace, le32_to_cpu(h->snap_trace_len));
+		check_caps = 1; /* we may have sent a RELEASE to the old auth */
+		goto done;
+	}
+
+	/* the rest require a cap */
+	spin_lock(&inode->i_lock);
+	cap = __get_cap_for_mds(ceph_inode(inode), mds);
+	if (!cap) {
+		dout("no cap on %p ino %llx.%llx from mds%d, releasing\n",
+		     inode, ceph_ino(inode), ceph_snap(inode), mds);
+		spin_unlock(&inode->i_lock);
+		goto done;
+	}
+
+	/* note that each of these drops i_lock for us */
+	switch (op) {
+	case CEPH_CAP_OP_REVOKE:
+	case CEPH_CAP_OP_GRANT:
+		r = handle_cap_grant(inode, h, session, cap, msg->middle);
+		if (r == 1)
+			ceph_check_caps(ceph_inode(inode),
+					CHECK_CAPS_NODELAY|CHECK_CAPS_AUTHONLY,
+					session);
+		else if (r == 2)
+			ceph_check_caps(ceph_inode(inode),
+					CHECK_CAPS_NODELAY,
+					session);
+		break;
+
+	case CEPH_CAP_OP_FLUSH_ACK:
+		handle_cap_flush_ack(inode, tid, h, session, cap);
+		break;
+
+	case CEPH_CAP_OP_TRUNC:
+		handle_cap_trunc(inode, h, session);
+		break;
+
+	default:
+		spin_unlock(&inode->i_lock);
+		pr_err("ceph_handle_caps: unknown cap op %d %s\n", op,
+		       ceph_cap_op_name(op));
+	}
+
+done:
+	mutex_unlock(&session->s_mutex);
+
+	if (check_caps)
+		ceph_check_caps(ceph_inode(inode), CHECK_CAPS_NODELAY, NULL);
+	if (inode)
+		iput(inode);
+	return;
+
+bad:
+	pr_err("ceph_handle_caps: corrupt message\n");
+	ceph_msg_dump(msg);
+	return;
+}
+
+/*
+ * Delayed work handler to process end of delayed cap release LRU list.
+ */
+void ceph_check_delayed_caps(struct ceph_mds_client *mdsc)
+{
+	struct ceph_inode_info *ci;
+	int flags = CHECK_CAPS_NODELAY;
+
+	dout("check_delayed_caps\n");
+	while (1) {
+		spin_lock(&mdsc->cap_delay_lock);
+		if (list_empty(&mdsc->cap_delay_list))
+			break;
+		ci = list_first_entry(&mdsc->cap_delay_list,
+				      struct ceph_inode_info,
+				      i_cap_delay_list);
+		if ((ci->i_ceph_flags & CEPH_I_FLUSH) == 0 &&
+		    time_before(jiffies, ci->i_hold_caps_max))
+			break;
+		list_del_init(&ci->i_cap_delay_list);
+		spin_unlock(&mdsc->cap_delay_lock);
+		dout("check_delayed_caps on %p\n", &ci->vfs_inode);
+		ceph_check_caps(ci, flags, NULL);
+	}
+	spin_unlock(&mdsc->cap_delay_lock);
+}
+
+/*
+ * Flush all dirty caps to the mds
+ */
+void ceph_flush_dirty_caps(struct ceph_mds_client *mdsc)
+{
+	struct ceph_inode_info *ci, *nci = NULL;
+	struct inode *inode, *ninode = NULL;
+	struct list_head *p, *n;
+
+	dout("flush_dirty_caps\n");
+	spin_lock(&mdsc->cap_dirty_lock);
+	list_for_each_safe(p, n, &mdsc->cap_dirty) {
+		if (nci) {
+			ci = nci;
+			inode = ninode;
+			ci->i_ceph_flags &= ~CEPH_I_NOFLUSH;
+			dout("flush_dirty_caps inode %p (was next inode)\n",
+			     inode);
+		} else {
+			ci = list_entry(p, struct ceph_inode_info,
+					i_dirty_item);
+			inode = igrab(&ci->vfs_inode);
+			BUG_ON(!inode);
+			dout("flush_dirty_caps inode %p\n", inode);
+		}
+		if (n != &mdsc->cap_dirty) {
+			nci = list_entry(n, struct ceph_inode_info,
+					 i_dirty_item);
+			ninode = igrab(&nci->vfs_inode);
+			BUG_ON(!ninode);
+			nci->i_ceph_flags |= CEPH_I_NOFLUSH;
+			dout("flush_dirty_caps next inode %p, noflush\n",
+			     ninode);
+		} else {
+			nci = NULL;
+			ninode = NULL;
+		}
+		spin_unlock(&mdsc->cap_dirty_lock);
+		if (inode) {
+			ceph_check_caps(ci, CHECK_CAPS_NODELAY|CHECK_CAPS_FLUSH,
+					NULL);
+			iput(inode);
+		}
+		spin_lock(&mdsc->cap_dirty_lock);
+	}
+	spin_unlock(&mdsc->cap_dirty_lock);
+}
+
+/*
+ * Drop open file reference.  If we were the last open file,
+ * we may need to release capabilities to the MDS (or schedule
+ * their delayed release).
+ */
+void ceph_put_fmode(struct ceph_inode_info *ci, int fmode)
+{
+	struct inode *inode = &ci->vfs_inode;
+	int last = 0;
+
+	spin_lock(&inode->i_lock);
+	dout("put_fmode %p fmode %d %d -> %d\n", inode, fmode,
+	     ci->i_nr_by_mode[fmode], ci->i_nr_by_mode[fmode]-1);
+	BUG_ON(ci->i_nr_by_mode[fmode] == 0);
+	if (--ci->i_nr_by_mode[fmode] == 0)
+		last++;
+	spin_unlock(&inode->i_lock);
+
+	if (last && ci->i_vino.snap == CEPH_NOSNAP)
+		ceph_check_caps(ci, 0, NULL);
+}
+
+/*
+ * Helpers for embedding cap and dentry lease releases into mds
+ * requests.
+ *
+ * @force is used by dentry_release (below) to force inclusion of a
+ * record for the directory inode, even when there aren't any caps to
+ * drop.
+ */
+int ceph_encode_inode_release(void **p, struct inode *inode,
+			      int mds, int drop, int unless, int force)
+{
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	struct ceph_cap *cap;
+	struct ceph_mds_request_release *rel = *p;
+	int ret = 0;
+
+	dout("encode_inode_release %p mds%d drop %s unless %s\n", inode,
+	     mds, ceph_cap_string(drop), ceph_cap_string(unless));
+
+	spin_lock(&inode->i_lock);
+	cap = __get_cap_for_mds(ci, mds);
+	if (cap && __cap_is_valid(cap)) {
+		if (force ||
+		    ((cap->issued & drop) &&
+		     (cap->issued & unless) == 0)) {
+			if ((cap->issued & drop) &&
+			    (cap->issued & unless) == 0) {
+				dout("encode_inode_release %p cap %p %s -> "
+				     "%s\n", inode, cap,
+				     ceph_cap_string(cap->issued),
+				     ceph_cap_string(cap->issued & ~drop));
+				cap->issued &= ~drop;
+				cap->implemented &= ~drop;
+				if (ci->i_ceph_flags & CEPH_I_NODELAY) {
+					int wanted = __ceph_caps_wanted(ci);
+					dout("  wanted %s -> %s (act %s)\n",
+					     ceph_cap_string(cap->mds_wanted),
+					     ceph_cap_string(cap->mds_wanted &
+							     ~wanted),
+					     ceph_cap_string(wanted));
+					cap->mds_wanted &= wanted;
+				}
+			} else {
+				dout("encode_inode_release %p cap %p %s"
+				     " (force)\n", inode, cap,
+				     ceph_cap_string(cap->issued));
+			}
+
+			rel->ino = cpu_to_le64(ceph_ino(inode));
+			rel->cap_id = cpu_to_le64(cap->cap_id);
+			rel->seq = cpu_to_le32(cap->seq);
+			rel->issue_seq = cpu_to_le32(cap->issue_seq),
+			rel->mseq = cpu_to_le32(cap->mseq);
+			rel->caps = cpu_to_le32(cap->issued);
+			rel->wanted = cpu_to_le32(cap->mds_wanted);
+			rel->dname_len = 0;
+			rel->dname_seq = 0;
+			*p += sizeof(*rel);
+			ret = 1;
+		} else {
+			dout("encode_inode_release %p cap %p %s\n",
+			     inode, cap, ceph_cap_string(cap->issued));
+		}
+	}
+	spin_unlock(&inode->i_lock);
+	return ret;
+}
+
+int ceph_encode_dentry_release(void **p, struct dentry *dentry,
+			       int mds, int drop, int unless)
+{
+	struct inode *dir = dentry->d_parent->d_inode;
+	struct ceph_mds_request_release *rel = *p;
+	struct ceph_dentry_info *di = ceph_dentry(dentry);
+	int force = 0;
+	int ret;
+
+	/*
+	 * force an record for the directory caps if we have a dentry lease.
+	 * this is racy (can't take i_lock and d_lock together), but it
+	 * doesn't have to be perfect; the mds will revoke anything we don't
+	 * release.
+	 */
+	spin_lock(&dentry->d_lock);
+	if (di->lease_session && di->lease_session->s_mds == mds)
+		force = 1;
+	spin_unlock(&dentry->d_lock);
+
+	ret = ceph_encode_inode_release(p, dir, mds, drop, unless, force);
+
+	spin_lock(&dentry->d_lock);
+	if (ret && di->lease_session && di->lease_session->s_mds == mds) {
+		dout("encode_dentry_release %p mds%d seq %d\n",
+		     dentry, mds, (int)di->lease_seq);
+		rel->dname_len = cpu_to_le32(dentry->d_name.len);
+		memcpy(*p, dentry->d_name.name, dentry->d_name.len);
+		*p += dentry->d_name.len;
+		rel->dname_seq = cpu_to_le32(di->lease_seq);
+	}
+	spin_unlock(&dentry->d_lock);
+	return ret;
+}
diff --git a/fs/ceph/ceph_debug.h b/fs/ceph/ceph_debug.h
new file mode 100644
index 000000000000..1818c2305610
--- /dev/null
+++ b/fs/ceph/ceph_debug.h
@@ -0,0 +1,37 @@
+#ifndef _FS_CEPH_DEBUG_H
+#define _FS_CEPH_DEBUG_H
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#ifdef CONFIG_CEPH_FS_PRETTYDEBUG
+
+/*
+ * wrap pr_debug to include a filename:lineno prefix on each line.
+ * this incurs some overhead (kernel size and execution time) due to
+ * the extra function call at each call site.
+ */
+
+# if defined(DEBUG) || defined(CONFIG_DYNAMIC_DEBUG)
+extern const char *ceph_file_part(const char *s, int len);
+#  define dout(fmt, ...)						\
+	pr_debug(" %12.12s:%-4d : " fmt,				\
+		 ceph_file_part(__FILE__, sizeof(__FILE__)),		\
+		 __LINE__, ##__VA_ARGS__)
+# else
+/* faux printk call just to see any compiler warnings. */
+#  define dout(fmt, ...)	do {				\
+		if (0)						\
+			printk(KERN_DEBUG fmt, ##__VA_ARGS__);	\
+	} while (0)
+# endif
+
+#else
+
+/*
+ * or, just wrap pr_debug
+ */
+# define dout(fmt, ...)	pr_debug(" " fmt, ##__VA_ARGS__)
+
+#endif
+
+#endif
diff --git a/fs/ceph/ceph_frag.c b/fs/ceph/ceph_frag.c
new file mode 100644
index 000000000000..ab6cf35c4091
--- /dev/null
+++ b/fs/ceph/ceph_frag.c
@@ -0,0 +1,21 @@
+/*
+ * Ceph 'frag' type
+ */
+#include "types.h"
+
+int ceph_frag_compare(__u32 a, __u32 b)
+{
+	unsigned va = ceph_frag_value(a);
+	unsigned vb = ceph_frag_value(b);
+	if (va < vb)
+		return -1;
+	if (va > vb)
+		return 1;
+	va = ceph_frag_bits(a);
+	vb = ceph_frag_bits(b);
+	if (va < vb)
+		return -1;
+	if (va > vb)
+		return 1;
+	return 0;
+}
diff --git a/fs/ceph/ceph_frag.h b/fs/ceph/ceph_frag.h
new file mode 100644
index 000000000000..793f50cb7c22
--- /dev/null
+++ b/fs/ceph/ceph_frag.h
@@ -0,0 +1,109 @@
+#ifndef _FS_CEPH_FRAG_H
+#define _FS_CEPH_FRAG_H
+
+/*
+ * "Frags" are a way to describe a subset of a 32-bit number space,
+ * using a mask and a value to match against that mask.  Any given frag
+ * (subset of the number space) can be partitioned into 2^n sub-frags.
+ *
+ * Frags are encoded into a 32-bit word:
+ *   8 upper bits = "bits"
+ *  24 lower bits = "value"
+ * (We could go to 5+27 bits, but who cares.)
+ *
+ * We use the _most_ significant bits of the 24 bit value.  This makes
+ * values logically sort.
+ *
+ * Unfortunately, because the "bits" field is still in the high bits, we
+ * can't sort encoded frags numerically.  However, it does allow you
+ * to feed encoded frags as values into frag_contains_value.
+ */
+static inline __u32 ceph_frag_make(__u32 b, __u32 v)
+{
+	return (b << 24) |
+		(v & (0xffffffu << (24-b)) & 0xffffffu);
+}
+static inline __u32 ceph_frag_bits(__u32 f)
+{
+	return f >> 24;
+}
+static inline __u32 ceph_frag_value(__u32 f)
+{
+	return f & 0xffffffu;
+}
+static inline __u32 ceph_frag_mask(__u32 f)
+{
+	return (0xffffffu << (24-ceph_frag_bits(f))) & 0xffffffu;
+}
+static inline __u32 ceph_frag_mask_shift(__u32 f)
+{
+	return 24 - ceph_frag_bits(f);
+}
+
+static inline int ceph_frag_contains_value(__u32 f, __u32 v)
+{
+	return (v & ceph_frag_mask(f)) == ceph_frag_value(f);
+}
+static inline int ceph_frag_contains_frag(__u32 f, __u32 sub)
+{
+	/* is sub as specific as us, and contained by us? */
+	return ceph_frag_bits(sub) >= ceph_frag_bits(f) &&
+	       (ceph_frag_value(sub) & ceph_frag_mask(f)) == ceph_frag_value(f);
+}
+
+static inline __u32 ceph_frag_parent(__u32 f)
+{
+	return ceph_frag_make(ceph_frag_bits(f) - 1,
+			 ceph_frag_value(f) & (ceph_frag_mask(f) << 1));
+}
+static inline int ceph_frag_is_left_child(__u32 f)
+{
+	return ceph_frag_bits(f) > 0 &&
+		(ceph_frag_value(f) & (0x1000000 >> ceph_frag_bits(f))) == 0;
+}
+static inline int ceph_frag_is_right_child(__u32 f)
+{
+	return ceph_frag_bits(f) > 0 &&
+		(ceph_frag_value(f) & (0x1000000 >> ceph_frag_bits(f))) == 1;
+}
+static inline __u32 ceph_frag_sibling(__u32 f)
+{
+	return ceph_frag_make(ceph_frag_bits(f),
+		      ceph_frag_value(f) ^ (0x1000000 >> ceph_frag_bits(f)));
+}
+static inline __u32 ceph_frag_left_child(__u32 f)
+{
+	return ceph_frag_make(ceph_frag_bits(f)+1, ceph_frag_value(f));
+}
+static inline __u32 ceph_frag_right_child(__u32 f)
+{
+	return ceph_frag_make(ceph_frag_bits(f)+1,
+	      ceph_frag_value(f) | (0x1000000 >> (1+ceph_frag_bits(f))));
+}
+static inline __u32 ceph_frag_make_child(__u32 f, int by, int i)
+{
+	int newbits = ceph_frag_bits(f) + by;
+	return ceph_frag_make(newbits,
+			 ceph_frag_value(f) | (i << (24 - newbits)));
+}
+static inline int ceph_frag_is_leftmost(__u32 f)
+{
+	return ceph_frag_value(f) == 0;
+}
+static inline int ceph_frag_is_rightmost(__u32 f)
+{
+	return ceph_frag_value(f) == ceph_frag_mask(f);
+}
+static inline __u32 ceph_frag_next(__u32 f)
+{
+	return ceph_frag_make(ceph_frag_bits(f),
+			 ceph_frag_value(f) + (0x1000000 >> ceph_frag_bits(f)));
+}
+
+/*
+ * comparator to sort frags logically, as when traversing the
+ * number space in ascending order...
+ */
+int ceph_frag_compare(__u32 a, __u32 b);
+
+#endif
diff --git a/fs/ceph/ceph_fs.c b/fs/ceph/ceph_fs.c
new file mode 100644
index 000000000000..79d76bc4303f
--- /dev/null
+++ b/fs/ceph/ceph_fs.c
@@ -0,0 +1,74 @@
+/*
+ * Some non-inline ceph helpers
+ */
+#include "types.h"
+
+/*
+ * return true if @layout appears to be valid
+ */
+int ceph_file_layout_is_valid(const struct ceph_file_layout *layout)
+{
+	__u32 su = le32_to_cpu(layout->fl_stripe_unit);
+	__u32 sc = le32_to_cpu(layout->fl_stripe_count);
+	__u32 os = le32_to_cpu(layout->fl_object_size);
+
+	/* stripe unit, object size must be non-zero, 64k increment */
+	if (!su || (su & (CEPH_MIN_STRIPE_UNIT-1)))
+		return 0;
+	if (!os || (os & (CEPH_MIN_STRIPE_UNIT-1)))
+		return 0;
+	/* object size must be a multiple of stripe unit */
+	if (os < su || os % su)
+		return 0;
+	/* stripe count must be non-zero */
+	if (!sc)
+		return 0;
+	return 1;
+}
+
+
+int ceph_flags_to_mode(int flags)
+{
+#ifdef O_DIRECTORY  /* fixme */
+	if ((flags & O_DIRECTORY) == O_DIRECTORY)
+		return CEPH_FILE_MODE_PIN;
+#endif
+#ifdef O_LAZY
+	if (flags & O_LAZY)
+		return CEPH_FILE_MODE_LAZY;
+#endif
+	if ((flags & O_APPEND) == O_APPEND)
+		flags |= O_WRONLY;
+
+	flags &= O_ACCMODE;
+	if ((flags & O_RDWR) == O_RDWR)
+		return CEPH_FILE_MODE_RDWR;
+	if ((flags & O_WRONLY) == O_WRONLY)
+		return CEPH_FILE_MODE_WR;
+	return CEPH_FILE_MODE_RD;
+}
+
+int ceph_caps_for_mode(int mode)
+{
+	switch (mode) {
+	case CEPH_FILE_MODE_PIN:
+		return CEPH_CAP_PIN;
+	case CEPH_FILE_MODE_RD:
+		return CEPH_CAP_PIN | CEPH_CAP_FILE_SHARED |
+			CEPH_CAP_FILE_RD | CEPH_CAP_FILE_CACHE;
+	case CEPH_FILE_MODE_RDWR:
+		return CEPH_CAP_PIN | CEPH_CAP_FILE_SHARED |
+			CEPH_CAP_FILE_EXCL |
+			CEPH_CAP_FILE_RD | CEPH_CAP_FILE_CACHE |
+			CEPH_CAP_FILE_WR | CEPH_CAP_FILE_BUFFER |
+			CEPH_CAP_AUTH_SHARED | CEPH_CAP_AUTH_EXCL |
+			CEPH_CAP_XATTR_SHARED | CEPH_CAP_XATTR_EXCL;
+	case CEPH_FILE_MODE_WR:
+		return CEPH_CAP_PIN | CEPH_CAP_FILE_SHARED |
+			CEPH_CAP_FILE_EXCL |
+			CEPH_CAP_FILE_WR | CEPH_CAP_FILE_BUFFER |
+			CEPH_CAP_AUTH_SHARED | CEPH_CAP_AUTH_EXCL |
+			CEPH_CAP_XATTR_SHARED | CEPH_CAP_XATTR_EXCL;
+	}
+	return 0;
+}
diff --git a/fs/ceph/ceph_fs.h b/fs/ceph/ceph_fs.h
new file mode 100644
index 000000000000..0c2241ef3653
--- /dev/null
+++ b/fs/ceph/ceph_fs.h
@@ -0,0 +1,650 @@
+/*
+ * ceph_fs.h - Ceph constants and data types to share between kernel and
+ * user space.
+ *
+ * Most types in this file are defined as little-endian, and are
+ * primarily intended to describe data structures that pass over the
+ * wire or that are stored on disk.
+ *
+ * LGPL2
+ */
+
+#ifndef _FS_CEPH_CEPH_FS_H
+#define _FS_CEPH_CEPH_FS_H
+
+#include "msgr.h"
+#include "rados.h"
+
+/*
+ * Ceph release version
+ */
+#define CEPH_VERSION_MAJOR 0
+#define CEPH_VERSION_MINOR 19
+#define CEPH_VERSION_PATCH 0
+
+#define _CEPH_STRINGIFY(x) #x
+#define CEPH_STRINGIFY(x) _CEPH_STRINGIFY(x)
+#define CEPH_MAKE_VERSION(x, y, z) CEPH_STRINGIFY(x) "." CEPH_STRINGIFY(y) \
+	"." CEPH_STRINGIFY(z)
+#define CEPH_VERSION CEPH_MAKE_VERSION(CEPH_VERSION_MAJOR, \
+				       CEPH_VERSION_MINOR, CEPH_VERSION_PATCH)
+
+/*
+ * subprotocol versions.  when specific messages types or high-level
+ * protocols change, bump the affected components.  we keep rev
+ * internal cluster protocols separately from the public,
+ * client-facing protocol.
+ */
+#define CEPH_OSD_PROTOCOL     8 /* cluster internal */
+#define CEPH_MDS_PROTOCOL     9 /* cluster internal */
+#define CEPH_MON_PROTOCOL     5 /* cluster internal */
+#define CEPH_OSDC_PROTOCOL   24 /* server/client */
+#define CEPH_MDSC_PROTOCOL   32 /* server/client */
+#define CEPH_MONC_PROTOCOL   15 /* server/client */
+
+
+#define CEPH_INO_ROOT  1
+#define CEPH_INO_CEPH  2        /* hidden .ceph dir */
+
+/* arbitrary limit on max # of monitors (cluster of 3 is typical) */
+#define CEPH_MAX_MON   31
+
+
+/*
+ * feature bits
+ */
+#define CEPH_FEATURE_SUPPORTED  0
+#define CEPH_FEATURE_REQUIRED   0
+
+
+/*
+ * ceph_file_layout - describe data layout for a file/inode
+ */
+struct ceph_file_layout {
+	/* file -> object mapping */
+	__le32 fl_stripe_unit;     /* stripe unit, in bytes.  must be multiple
+				      of page size. */
+	__le32 fl_stripe_count;    /* over this many objects */
+	__le32 fl_object_size;     /* until objects are this big, then move to
+				      new objects */
+	__le32 fl_cas_hash;        /* 0 = none; 1 = sha256 */
+
+	/* pg -> disk layout */
+	__le32 fl_object_stripe_unit;  /* for per-object parity, if any */
+
+	/* object -> pg layout */
+	__le32 fl_pg_preferred; /* preferred primary for pg (-1 for none) */
+	__le32 fl_pg_pool;      /* namespace, crush ruleset, rep level */
+} __attribute__ ((packed));
+
+#define CEPH_MIN_STRIPE_UNIT 65536
+
+int ceph_file_layout_is_valid(const struct ceph_file_layout *layout);
+
+
+/* crypto algorithms */
+#define CEPH_CRYPTO_NONE 0x0
+#define CEPH_CRYPTO_AES  0x1
+
+/* security/authentication protocols */
+#define CEPH_AUTH_UNKNOWN	0x0
+#define CEPH_AUTH_NONE	 	0x1
+#define CEPH_AUTH_CEPHX	 	0x2
+
+
+/*********************************************
+ * message layer
+ */
+
+/*
+ * message types
+ */
+
+/* misc */
+#define CEPH_MSG_SHUTDOWN               1
+#define CEPH_MSG_PING                   2
+
+/* client <-> monitor */
+#define CEPH_MSG_MON_MAP                4
+#define CEPH_MSG_MON_GET_MAP            5
+#define CEPH_MSG_STATFS                 13
+#define CEPH_MSG_STATFS_REPLY           14
+#define CEPH_MSG_MON_SUBSCRIBE          15
+#define CEPH_MSG_MON_SUBSCRIBE_ACK      16
+#define CEPH_MSG_AUTH			17
+#define CEPH_MSG_AUTH_REPLY		18
+
+/* client <-> mds */
+#define CEPH_MSG_MDS_MAP                21
+
+#define CEPH_MSG_CLIENT_SESSION         22
+#define CEPH_MSG_CLIENT_RECONNECT       23
+
+#define CEPH_MSG_CLIENT_REQUEST         24
+#define CEPH_MSG_CLIENT_REQUEST_FORWARD 25
+#define CEPH_MSG_CLIENT_REPLY           26
+#define CEPH_MSG_CLIENT_CAPS            0x310
+#define CEPH_MSG_CLIENT_LEASE           0x311
+#define CEPH_MSG_CLIENT_SNAP            0x312
+#define CEPH_MSG_CLIENT_CAPRELEASE      0x313
+
+/* osd */
+#define CEPH_MSG_OSD_MAP          41
+#define CEPH_MSG_OSD_OP           42
+#define CEPH_MSG_OSD_OPREPLY      43
+
+struct ceph_mon_request_header {
+	__le64 have_version;
+	__le16 session_mon;
+	__le64 session_mon_tid;
+} __attribute__ ((packed));
+
+struct ceph_mon_statfs {
+	struct ceph_mon_request_header monhdr;
+	struct ceph_fsid fsid;
+} __attribute__ ((packed));
+
+struct ceph_statfs {
+	__le64 kb, kb_used, kb_avail;
+	__le64 num_objects;
+} __attribute__ ((packed));
+
+struct ceph_mon_statfs_reply {
+	struct ceph_fsid fsid;
+	__le64 version;
+	struct ceph_statfs st;
+} __attribute__ ((packed));
+
+struct ceph_osd_getmap {
+	struct ceph_mon_request_header monhdr;
+	struct ceph_fsid fsid;
+	__le32 start;
+} __attribute__ ((packed));
+
+struct ceph_mds_getmap {
+	struct ceph_mon_request_header monhdr;
+	struct ceph_fsid fsid;
+} __attribute__ ((packed));
+
+struct ceph_client_mount {
+	struct ceph_mon_request_header monhdr;
+} __attribute__ ((packed));
+
+struct ceph_mon_subscribe_item {
+	__le64 have_version;	__le64 have;
+	__u8 onetime;
+} __attribute__ ((packed));
+
+struct ceph_mon_subscribe_ack {
+	__le32 duration;         /* seconds */
+	struct ceph_fsid fsid;
+} __attribute__ ((packed));
+
+/*
+ * mds states
+ *   > 0 -> in
+ *  <= 0 -> out
+ */
+#define CEPH_MDS_STATE_DNE          0  /* down, does not exist. */
+#define CEPH_MDS_STATE_STOPPED     -1  /* down, once existed, but no subtrees.
+					  empty log. */
+#define CEPH_MDS_STATE_BOOT        -4  /* up, boot announcement. */
+#define CEPH_MDS_STATE_STANDBY     -5  /* up, idle.  waiting for assignment. */
+#define CEPH_MDS_STATE_CREATING    -6  /* up, creating MDS instance. */
+#define CEPH_MDS_STATE_STARTING    -7  /* up, starting previously stopped mds */
+#define CEPH_MDS_STATE_STANDBY_REPLAY -8 /* up, tailing active node's journal */
+
+#define CEPH_MDS_STATE_REPLAY       8  /* up, replaying journal. */
+#define CEPH_MDS_STATE_RESOLVE      9  /* up, disambiguating distributed
+					  operations (import, rename, etc.) */
+#define CEPH_MDS_STATE_RECONNECT    10 /* up, reconnect to clients */
+#define CEPH_MDS_STATE_REJOIN       11 /* up, rejoining distributed cache */
+#define CEPH_MDS_STATE_CLIENTREPLAY 12 /* up, replaying client operations */
+#define CEPH_MDS_STATE_ACTIVE       13 /* up, active */
+#define CEPH_MDS_STATE_STOPPING     14 /* up, but exporting metadata */
+
+extern const char *ceph_mds_state_name(int s);
+
+
+/*
+ * metadata lock types.
+ *  - these are bitmasks.. we can compose them
+ *  - they also define the lock ordering by the MDS
+ *  - a few of these are internal to the mds
+ */
+#define CEPH_LOCK_DN          1
+#define CEPH_LOCK_ISNAP       2
+#define CEPH_LOCK_IVERSION    4     /* mds internal */
+#define CEPH_LOCK_IFILE       8     /* mds internal */
+#define CEPH_LOCK_IAUTH       32
+#define CEPH_LOCK_ILINK       64
+#define CEPH_LOCK_IDFT        128   /* dir frag tree */
+#define CEPH_LOCK_INEST       256   /* mds internal */
+#define CEPH_LOCK_IXATTR      512
+#define CEPH_LOCK_INO         2048  /* immutable inode bits; not a lock */
+
+/* client_session ops */
+enum {
+	CEPH_SESSION_REQUEST_OPEN,
+	CEPH_SESSION_OPEN,
+	CEPH_SESSION_REQUEST_CLOSE,
+	CEPH_SESSION_CLOSE,
+	CEPH_SESSION_REQUEST_RENEWCAPS,
+	CEPH_SESSION_RENEWCAPS,
+	CEPH_SESSION_STALE,
+	CEPH_SESSION_RECALL_STATE,
+};
+
+extern const char *ceph_session_op_name(int op);
+
+struct ceph_mds_session_head {
+	__le32 op;
+	__le64 seq;
+	struct ceph_timespec stamp;
+	__le32 max_caps, max_leases;
+} __attribute__ ((packed));
+
+/* client_request */
+/*
+ * metadata ops.
+ *  & 0x001000 -> write op
+ *  & 0x010000 -> follow symlink (e.g. stat(), not lstat()).
+ &  & 0x100000 -> use weird ino/path trace
+ */
+#define CEPH_MDS_OP_WRITE        0x001000
+enum {
+	CEPH_MDS_OP_LOOKUP     = 0x00100,
+	CEPH_MDS_OP_GETATTR    = 0x00101,
+	CEPH_MDS_OP_LOOKUPHASH = 0x00102,
+	CEPH_MDS_OP_LOOKUPPARENT = 0x00103,
+
+	CEPH_MDS_OP_SETXATTR   = 0x01105,
+	CEPH_MDS_OP_RMXATTR    = 0x01106,
+	CEPH_MDS_OP_SETLAYOUT  = 0x01107,
+	CEPH_MDS_OP_SETATTR    = 0x01108,
+
+	CEPH_MDS_OP_MKNOD      = 0x01201,
+	CEPH_MDS_OP_LINK       = 0x01202,
+	CEPH_MDS_OP_UNLINK     = 0x01203,
+	CEPH_MDS_OP_RENAME     = 0x01204,
+	CEPH_MDS_OP_MKDIR      = 0x01220,
+	CEPH_MDS_OP_RMDIR      = 0x01221,
+	CEPH_MDS_OP_SYMLINK    = 0x01222,
+
+	CEPH_MDS_OP_CREATE     = 0x01301,
+	CEPH_MDS_OP_OPEN       = 0x00302,
+	CEPH_MDS_OP_READDIR    = 0x00305,
+
+	CEPH_MDS_OP_LOOKUPSNAP = 0x00400,
+	CEPH_MDS_OP_MKSNAP     = 0x01400,
+	CEPH_MDS_OP_RMSNAP     = 0x01401,
+	CEPH_MDS_OP_LSSNAP     = 0x00402,
+};
+
+extern const char *ceph_mds_op_name(int op);
+
+
+#define CEPH_SETATTR_MODE   1
+#define CEPH_SETATTR_UID    2
+#define CEPH_SETATTR_GID    4
+#define CEPH_SETATTR_MTIME  8
+#define CEPH_SETATTR_ATIME 16
+#define CEPH_SETATTR_SIZE  32
+#define CEPH_SETATTR_CTIME 64
+
+union ceph_mds_request_args {
+	struct {
+		__le32 mask;                 /* CEPH_CAP_* */
+	} __attribute__ ((packed)) getattr;
+	struct {
+		__le32 mode;
+		__le32 uid;
+		__le32 gid;
+		struct ceph_timespec mtime;
+		struct ceph_timespec atime;
+		__le64 size, old_size;       /* old_size needed by truncate */
+		__le32 mask;                 /* CEPH_SETATTR_* */
+	} __attribute__ ((packed)) setattr;
+	struct {
+		__le32 frag;                 /* which dir fragment */
+		__le32 max_entries;          /* how many dentries to grab */
+	} __attribute__ ((packed)) readdir;
+	struct {
+		__le32 mode;
+		__le32 rdev;
+	} __attribute__ ((packed)) mknod;
+	struct {
+		__le32 mode;
+	} __attribute__ ((packed)) mkdir;
+	struct {
+		__le32 flags;
+		__le32 mode;
+		__le32 stripe_unit;          /* layout for newly created file */
+		__le32 stripe_count;         /* ... */
+		__le32 object_size;
+		__le32 file_replication;
+		__le32 preferred;
+	} __attribute__ ((packed)) open;
+	struct {
+		__le32 flags;
+	} __attribute__ ((packed)) setxattr;
+	struct {
+		struct ceph_file_layout layout;
+	} __attribute__ ((packed)) setlayout;
+} __attribute__ ((packed));
+
+#define CEPH_MDS_FLAG_REPLAY        1  /* this is a replayed op */
+#define CEPH_MDS_FLAG_WANT_DENTRY   2  /* want dentry in reply */
+
+struct ceph_mds_request_head {
+	__le64 oldest_client_tid;
+	__le32 mdsmap_epoch;           /* on client */
+	__le32 flags;                  /* CEPH_MDS_FLAG_* */
+	__u8 num_retry, num_fwd;       /* count retry, fwd attempts */
+	__le16 num_releases;           /* # include cap/lease release records */
+	__le32 op;                     /* mds op code */
+	__le32 caller_uid, caller_gid;
+	__le64 ino;                    /* use this ino for openc, mkdir, mknod,
+					  etc. (if replaying) */
+	union ceph_mds_request_args args;
+} __attribute__ ((packed));
+
+/* cap/lease release record */
+struct ceph_mds_request_release {
+	__le64 ino, cap_id;            /* ino and unique cap id */
+	__le32 caps, wanted;           /* new issued, wanted */
+	__le32 seq, issue_seq, mseq;
+	__le32 dname_seq;              /* if releasing a dentry lease, a */
+	__le32 dname_len;              /* string follows. */
+} __attribute__ ((packed));
+
+/* client reply */
+struct ceph_mds_reply_head {
+	__le32 op;
+	__le32 result;
+	__le32 mdsmap_epoch;
+	__u8 safe;                     /* true if committed to disk */
+	__u8 is_dentry, is_target;     /* true if dentry, target inode records
+					  are included with reply */
+} __attribute__ ((packed));
+
+/* one for each node split */
+struct ceph_frag_tree_split {
+	__le32 frag;                   /* this frag splits... */
+	__le32 by;                     /* ...by this many bits */
+} __attribute__ ((packed));
+
+struct ceph_frag_tree_head {
+	__le32 nsplits;                /* num ceph_frag_tree_split records */
+	struct ceph_frag_tree_split splits[];
+} __attribute__ ((packed));
+
+/* capability issue, for bundling with mds reply */
+struct ceph_mds_reply_cap {
+	__le32 caps, wanted;           /* caps issued, wanted */
+	__le64 cap_id;
+	__le32 seq, mseq;
+	__le64 realm;                  /* snap realm */
+	__u8 flags;                    /* CEPH_CAP_FLAG_* */
+} __attribute__ ((packed));
+
+#define CEPH_CAP_FLAG_AUTH  1          /* cap is issued by auth mds */
+
+/* inode record, for bundling with mds reply */
+struct ceph_mds_reply_inode {
+	__le64 ino;
+	__le64 snapid;
+	__le32 rdev;
+	__le64 version;                /* inode version */
+	__le64 xattr_version;          /* version for xattr blob */
+	struct ceph_mds_reply_cap cap; /* caps issued for this inode */
+	struct ceph_file_layout layout;
+	struct ceph_timespec ctime, mtime, atime;
+	__le32 time_warp_seq;
+	__le64 size, max_size, truncate_size;
+	__le32 truncate_seq;
+	__le32 mode, uid, gid;
+	__le32 nlink;
+	__le64 files, subdirs, rbytes, rfiles, rsubdirs;  /* dir stats */
+	struct ceph_timespec rctime;
+	struct ceph_frag_tree_head fragtree;  /* (must be at end of struct) */
+} __attribute__ ((packed));
+/* followed by frag array, then symlink string, then xattr blob */
+
+/* reply_lease follows dname, and reply_inode */
+struct ceph_mds_reply_lease {
+	__le16 mask;            /* lease type(s) */
+	__le32 duration_ms;     /* lease duration */
+	__le32 seq;
+} __attribute__ ((packed));
+
+struct ceph_mds_reply_dirfrag {
+	__le32 frag;            /* fragment */
+	__le32 auth;            /* auth mds, if this is a delegation point */
+	__le32 ndist;           /* number of mds' this is replicated on */
+	__le32 dist[];
+} __attribute__ ((packed));
+
+/* file access modes */
+#define CEPH_FILE_MODE_PIN        0
+#define CEPH_FILE_MODE_RD         1
+#define CEPH_FILE_MODE_WR         2
+#define CEPH_FILE_MODE_RDWR       3  /* RD | WR */
+#define CEPH_FILE_MODE_LAZY       4  /* lazy io */
+#define CEPH_FILE_MODE_NUM        8  /* bc these are bit fields.. mostly */
+
+int ceph_flags_to_mode(int flags);
+
+
+/* capability bits */
+#define CEPH_CAP_PIN         1  /* no specific capabilities beyond the pin */
+
+/* generic cap bits */
+#define CEPH_CAP_GSHARED     1  /* client can reads */
+#define CEPH_CAP_GEXCL       2  /* client can read and update */
+#define CEPH_CAP_GCACHE      4  /* (file) client can cache reads */
+#define CEPH_CAP_GRD         8  /* (file) client can read */
+#define CEPH_CAP_GWR        16  /* (file) client can write */
+#define CEPH_CAP_GBUFFER    32  /* (file) client can buffer writes */
+#define CEPH_CAP_GWREXTEND  64  /* (file) client can extend EOF */
+#define CEPH_CAP_GLAZYIO   128  /* (file) client can perform lazy io */
+
+/* per-lock shift */
+#define CEPH_CAP_SAUTH      2
+#define CEPH_CAP_SLINK      4
+#define CEPH_CAP_SXATTR     6
+#define CEPH_CAP_SFILE      8   /* goes at the end (uses >2 cap bits) */
+
+#define CEPH_CAP_BITS       16
+
+/* composed values */
+#define CEPH_CAP_AUTH_SHARED  (CEPH_CAP_GSHARED  << CEPH_CAP_SAUTH)
+#define CEPH_CAP_AUTH_EXCL     (CEPH_CAP_GEXCL     << CEPH_CAP_SAUTH)
+#define CEPH_CAP_LINK_SHARED  (CEPH_CAP_GSHARED  << CEPH_CAP_SLINK)
+#define CEPH_CAP_LINK_EXCL     (CEPH_CAP_GEXCL     << CEPH_CAP_SLINK)
+#define CEPH_CAP_XATTR_SHARED (CEPH_CAP_GSHARED  << CEPH_CAP_SXATTR)
+#define CEPH_CAP_XATTR_EXCL    (CEPH_CAP_GEXCL     << CEPH_CAP_SXATTR)
+#define CEPH_CAP_FILE(x)    (x << CEPH_CAP_SFILE)
+#define CEPH_CAP_FILE_SHARED   (CEPH_CAP_GSHARED   << CEPH_CAP_SFILE)
+#define CEPH_CAP_FILE_EXCL     (CEPH_CAP_GEXCL     << CEPH_CAP_SFILE)
+#define CEPH_CAP_FILE_CACHE    (CEPH_CAP_GCACHE    << CEPH_CAP_SFILE)
+#define CEPH_CAP_FILE_RD       (CEPH_CAP_GRD       << CEPH_CAP_SFILE)
+#define CEPH_CAP_FILE_WR       (CEPH_CAP_GWR       << CEPH_CAP_SFILE)
+#define CEPH_CAP_FILE_BUFFER   (CEPH_CAP_GBUFFER   << CEPH_CAP_SFILE)
+#define CEPH_CAP_FILE_WREXTEND (CEPH_CAP_GWREXTEND << CEPH_CAP_SFILE)
+#define CEPH_CAP_FILE_LAZYIO   (CEPH_CAP_GLAZYIO   << CEPH_CAP_SFILE)
+
+/* cap masks (for getattr) */
+#define CEPH_STAT_CAP_INODE    CEPH_CAP_PIN
+#define CEPH_STAT_CAP_TYPE     CEPH_CAP_PIN  /* mode >> 12 */
+#define CEPH_STAT_CAP_SYMLINK  CEPH_CAP_PIN
+#define CEPH_STAT_CAP_UID      CEPH_CAP_AUTH_SHARED
+#define CEPH_STAT_CAP_GID      CEPH_CAP_AUTH_SHARED
+#define CEPH_STAT_CAP_MODE     CEPH_CAP_AUTH_SHARED
+#define CEPH_STAT_CAP_NLINK    CEPH_CAP_LINK_SHARED
+#define CEPH_STAT_CAP_LAYOUT   CEPH_CAP_FILE_SHARED
+#define CEPH_STAT_CAP_MTIME    CEPH_CAP_FILE_SHARED
+#define CEPH_STAT_CAP_SIZE     CEPH_CAP_FILE_SHARED
+#define CEPH_STAT_CAP_ATIME    CEPH_CAP_FILE_SHARED  /* fixme */
+#define CEPH_STAT_CAP_XATTR    CEPH_CAP_XATTR_SHARED
+#define CEPH_STAT_CAP_INODE_ALL (CEPH_CAP_PIN |			\
+				 CEPH_CAP_AUTH_SHARED |	\
+				 CEPH_CAP_LINK_SHARED |	\
+				 CEPH_CAP_FILE_SHARED |	\
+				 CEPH_CAP_XATTR_SHARED)
+
+#define CEPH_CAP_ANY_SHARED (CEPH_CAP_AUTH_SHARED |			\
+			      CEPH_CAP_LINK_SHARED |			\
+			      CEPH_CAP_XATTR_SHARED |			\
+			      CEPH_CAP_FILE_SHARED)
+#define CEPH_CAP_ANY_RD   (CEPH_CAP_ANY_SHARED | CEPH_CAP_FILE_RD |	\
+			   CEPH_CAP_FILE_CACHE)
+
+#define CEPH_CAP_ANY_EXCL (CEPH_CAP_AUTH_EXCL |		\
+			   CEPH_CAP_LINK_EXCL |		\
+			   CEPH_CAP_XATTR_EXCL |	\
+			   CEPH_CAP_FILE_EXCL)
+#define CEPH_CAP_ANY_FILE_WR (CEPH_CAP_FILE_WR | CEPH_CAP_FILE_BUFFER |	\
+			      CEPH_CAP_FILE_EXCL)
+#define CEPH_CAP_ANY_WR   (CEPH_CAP_ANY_EXCL | CEPH_CAP_ANY_FILE_WR)
+#define CEPH_CAP_ANY      (CEPH_CAP_ANY_RD | CEPH_CAP_ANY_EXCL | \
+			   CEPH_CAP_ANY_FILE_WR | CEPH_CAP_PIN)
+
+#define CEPH_CAP_LOCKS (CEPH_LOCK_IFILE | CEPH_LOCK_IAUTH | CEPH_LOCK_ILINK | \
+			CEPH_LOCK_IXATTR)
+
+int ceph_caps_for_mode(int mode);
+
+enum {
+	CEPH_CAP_OP_GRANT,         /* mds->client grant */
+	CEPH_CAP_OP_REVOKE,        /* mds->client revoke */
+	CEPH_CAP_OP_TRUNC,         /* mds->client trunc notify */
+	CEPH_CAP_OP_EXPORT,        /* mds has exported the cap */
+	CEPH_CAP_OP_IMPORT,        /* mds has imported the cap */
+	CEPH_CAP_OP_UPDATE,        /* client->mds update */
+	CEPH_CAP_OP_DROP,          /* client->mds drop cap bits */
+	CEPH_CAP_OP_FLUSH,         /* client->mds cap writeback */
+	CEPH_CAP_OP_FLUSH_ACK,     /* mds->client flushed */
+	CEPH_CAP_OP_FLUSHSNAP,     /* client->mds flush snapped metadata */
+	CEPH_CAP_OP_FLUSHSNAP_ACK, /* mds->client flushed snapped metadata */
+	CEPH_CAP_OP_RELEASE,       /* client->mds release (clean) cap */
+	CEPH_CAP_OP_RENEW,         /* client->mds renewal request */
+};
+
+extern const char *ceph_cap_op_name(int op);
+
+/*
+ * caps message, used for capability callbacks, acks, requests, etc.
+ */
+struct ceph_mds_caps {
+	__le32 op;                  /* CEPH_CAP_OP_* */
+	__le64 ino, realm;
+	__le64 cap_id;
+	__le32 seq, issue_seq;
+	__le32 caps, wanted, dirty; /* latest issued/wanted/dirty */
+	__le32 migrate_seq;
+	__le64 snap_follows;
+	__le32 snap_trace_len;
+
+	/* authlock */
+	__le32 uid, gid, mode;
+
+	/* linklock */
+	__le32 nlink;
+
+	/* xattrlock */
+	__le32 xattr_len;
+	__le64 xattr_version;
+
+	/* filelock */
+	__le64 size, max_size, truncate_size;
+	__le32 truncate_seq;
+	struct ceph_timespec mtime, atime, ctime;
+	struct ceph_file_layout layout;
+	__le32 time_warp_seq;
+} __attribute__ ((packed));
+
+/* cap release msg head */
+struct ceph_mds_cap_release {
+	__le32 num;                /* number of cap_items that follow */
+} __attribute__ ((packed));
+
+struct ceph_mds_cap_item {
+	__le64 ino;
+	__le64 cap_id;
+	__le32 migrate_seq, seq;
+} __attribute__ ((packed));
+
+#define CEPH_MDS_LEASE_REVOKE           1  /*    mds  -> client */
+#define CEPH_MDS_LEASE_RELEASE          2  /* client  -> mds    */
+#define CEPH_MDS_LEASE_RENEW            3  /* client <-> mds    */
+#define CEPH_MDS_LEASE_REVOKE_ACK       4  /* client  -> mds    */
+
+extern const char *ceph_lease_op_name(int o);
+
+/* lease msg header */
+struct ceph_mds_lease {
+	__u8 action;            /* CEPH_MDS_LEASE_* */
+	__le16 mask;            /* which lease */
+	__le64 ino;
+	__le64 first, last;     /* snap range */
+	__le32 seq;
+	__le32 duration_ms;     /* duration of renewal */
+} __attribute__ ((packed));
+/* followed by a __le32+string for dname */
+
+/* client reconnect */
+struct ceph_mds_cap_reconnect {
+	__le64 cap_id;
+	__le32 wanted;
+	__le32 issued;
+	__le64 size;
+	struct ceph_timespec mtime, atime;
+	__le64 snaprealm;
+	__le64 pathbase;        /* base ino for our path to this ino */
+} __attribute__ ((packed));
+/* followed by encoded string */
+
+struct ceph_mds_snaprealm_reconnect {
+	__le64 ino;     /* snap realm base */
+	__le64 seq;     /* snap seq for this snap realm */
+	__le64 parent;  /* parent realm */
+} __attribute__ ((packed));
+
+/*
+ * snaps
+ */
+enum {
+	CEPH_SNAP_OP_UPDATE,  /* CREATE or DESTROY */
+	CEPH_SNAP_OP_CREATE,
+	CEPH_SNAP_OP_DESTROY,
+	CEPH_SNAP_OP_SPLIT,
+};
+
+extern const char *ceph_snap_op_name(int o);
+
+/* snap msg header */
+struct ceph_mds_snap_head {
+	__le32 op;                /* CEPH_SNAP_OP_* */
+	__le64 split;             /* ino to split off, if any */
+	__le32 num_split_inos;    /* # inos belonging to new child realm */
+	__le32 num_split_realms;  /* # child realms udner new child realm */
+	__le32 trace_len;         /* size of snap trace blob */
+} __attribute__ ((packed));
+/* followed by split ino list, then split realms, then the trace blob */
+
+/*
+ * encode info about a snaprealm, as viewed by a client
+ */
+struct ceph_mds_snap_realm {
+	__le64 ino;           /* ino */
+	__le64 created;       /* snap: when created */
+	__le64 parent;        /* ino: parent realm */
+	__le64 parent_since;  /* snap: same parent since */
+	__le64 seq;           /* snap: version */
+	__le32 num_snaps;
+	__le32 num_prior_parent_snaps;
+} __attribute__ ((packed));
+/* followed by my snap list, then prior parent snap list */
+
+#endif
diff --git a/fs/ceph/ceph_hash.c b/fs/ceph/ceph_hash.c
new file mode 100644
index 000000000000..bd570015d147
--- /dev/null
+++ b/fs/ceph/ceph_hash.c
@@ -0,0 +1,118 @@
+
+#include "types.h"
+
+/*
+ * Robert Jenkin's hash function.
+ * http://burtleburtle.net/bob/hash/evahash.html
+ * This is in the public domain.
+ */
+#define mix(a, b, c)						\
+	do {							\
+		a = a - b;  a = a - c;  a = a ^ (c >> 13);	\
+		b = b - c;  b = b - a;  b = b ^ (a << 8);	\
+		c = c - a;  c = c - b;  c = c ^ (b >> 13);	\
+		a = a - b;  a = a - c;  a = a ^ (c >> 12);	\
+		b = b - c;  b = b - a;  b = b ^ (a << 16);	\
+		c = c - a;  c = c - b;  c = c ^ (b >> 5);	\
+		a = a - b;  a = a - c;  a = a ^ (c >> 3);	\
+		b = b - c;  b = b - a;  b = b ^ (a << 10);	\
+		c = c - a;  c = c - b;  c = c ^ (b >> 15);	\
+	} while (0)
+
+unsigned ceph_str_hash_rjenkins(const char *str, unsigned length)
+{
+	const unsigned char *k = (const unsigned char *)str;
+	__u32 a, b, c;  /* the internal state */
+	__u32 len;      /* how many key bytes still need mixing */
+
+	/* Set up the internal state */
+	len = length;
+	a = 0x9e3779b9;      /* the golden ratio; an arbitrary value */
+	b = a;
+	c = 0;               /* variable initialization of internal state */
+
+	/* handle most of the key */
+	while (len >= 12) {
+		a = a + (k[0] + ((__u32)k[1] << 8) + ((__u32)k[2] << 16) +
+			 ((__u32)k[3] << 24));
+		b = b + (k[4] + ((__u32)k[5] << 8) + ((__u32)k[6] << 16) +
+			 ((__u32)k[7] << 24));
+		c = c + (k[8] + ((__u32)k[9] << 8) + ((__u32)k[10] << 16) +
+			 ((__u32)k[11] << 24));
+		mix(a, b, c);
+		k = k + 12;
+		len = len - 12;
+	}
+
+	/* handle the last 11 bytes */
+	c = c + length;
+	switch (len) {            /* all the case statements fall through */
+	case 11:
+		c = c + ((__u32)k[10] << 24);
+	case 10:
+		c = c + ((__u32)k[9] << 16);
+	case 9:
+		c = c + ((__u32)k[8] << 8);
+		/* the first byte of c is reserved for the length */
+	case 8:
+		b = b + ((__u32)k[7] << 24);
+	case 7:
+		b = b + ((__u32)k[6] << 16);
+	case 6:
+		b = b + ((__u32)k[5] << 8);
+	case 5:
+		b = b + k[4];
+	case 4:
+		a = a + ((__u32)k[3] << 24);
+	case 3:
+		a = a + ((__u32)k[2] << 16);
+	case 2:
+		a = a + ((__u32)k[1] << 8);
+	case 1:
+		a = a + k[0];
+		/* case 0: nothing left to add */
+	}
+	mix(a, b, c);
+
+	return c;
+}
+
+/*
+ * linux dcache hash
+ */
+unsigned ceph_str_hash_linux(const char *str, unsigned length)
+{
+	unsigned long hash = 0;
+	unsigned char c;
+
+	while (length--) {
+		c = *str++;
+		hash = (hash + (c << 4) + (c >> 4)) * 11;
+	}
+	return hash;
+}
+
+
+unsigned ceph_str_hash(int type, const char *s, unsigned len)
+{
+	switch (type) {
+	case CEPH_STR_HASH_LINUX:
+		return ceph_str_hash_linux(s, len);
+	case CEPH_STR_HASH_RJENKINS:
+		return ceph_str_hash_rjenkins(s, len);
+	default:
+		return -1;
+	}
+}
+
+const char *ceph_str_hash_name(int type)
+{
+	switch (type) {
+	case CEPH_STR_HASH_LINUX:
+		return "linux";
+	case CEPH_STR_HASH_RJENKINS:
+		return "rjenkins";
+	default:
+		return "unknown";
+	}
+}
diff --git a/fs/ceph/ceph_hash.h b/fs/ceph/ceph_hash.h
new file mode 100644
index 000000000000..5ac470c433c9
--- /dev/null
+++ b/fs/ceph/ceph_hash.h
@@ -0,0 +1,13 @@
+#ifndef _FS_CEPH_HASH_H
+#define _FS_CEPH_HASH_H
+
+#define CEPH_STR_HASH_LINUX      0x1  /* linux dcache hash */
+#define CEPH_STR_HASH_RJENKINS   0x2  /* robert jenkins' */
+
+extern unsigned ceph_str_hash_linux(const char *s, unsigned len);
+extern unsigned ceph_str_hash_rjenkins(const char *s, unsigned len);
+
+extern unsigned ceph_str_hash(int type, const char *s, unsigned len);
+extern const char *ceph_str_hash_name(int type);
+
+#endif
diff --git a/fs/ceph/ceph_strings.c b/fs/ceph/ceph_strings.c
new file mode 100644
index 000000000000..8e4be6a80c62
--- /dev/null
+++ b/fs/ceph/ceph_strings.c
@@ -0,0 +1,176 @@
+/*
+ * Ceph string constants
+ */
+#include "types.h"
+
+const char *ceph_entity_type_name(int type)
+{
+	switch (type) {
+	case CEPH_ENTITY_TYPE_MDS: return "mds";
+	case CEPH_ENTITY_TYPE_OSD: return "osd";
+	case CEPH_ENTITY_TYPE_MON: return "mon";
+	case CEPH_ENTITY_TYPE_CLIENT: return "client";
+	case CEPH_ENTITY_TYPE_ADMIN: return "admin";
+	case CEPH_ENTITY_TYPE_AUTH: return "auth";
+	default: return "unknown";
+	}
+}
+
+const char *ceph_osd_op_name(int op)
+{
+	switch (op) {
+	case CEPH_OSD_OP_READ: return "read";
+	case CEPH_OSD_OP_STAT: return "stat";
+
+	case CEPH_OSD_OP_MASKTRUNC: return "masktrunc";
+
+	case CEPH_OSD_OP_WRITE: return "write";
+	case CEPH_OSD_OP_DELETE: return "delete";
+	case CEPH_OSD_OP_TRUNCATE: return "truncate";
+	case CEPH_OSD_OP_ZERO: return "zero";
+	case CEPH_OSD_OP_WRITEFULL: return "writefull";
+
+	case CEPH_OSD_OP_APPEND: return "append";
+	case CEPH_OSD_OP_STARTSYNC: return "startsync";
+	case CEPH_OSD_OP_SETTRUNC: return "settrunc";
+	case CEPH_OSD_OP_TRIMTRUNC: return "trimtrunc";
+
+	case CEPH_OSD_OP_TMAPUP: return "tmapup";
+	case CEPH_OSD_OP_TMAPGET: return "tmapget";
+	case CEPH_OSD_OP_TMAPPUT: return "tmapput";
+
+	case CEPH_OSD_OP_GETXATTR: return "getxattr";
+	case CEPH_OSD_OP_GETXATTRS: return "getxattrs";
+	case CEPH_OSD_OP_SETXATTR: return "setxattr";
+	case CEPH_OSD_OP_SETXATTRS: return "setxattrs";
+	case CEPH_OSD_OP_RESETXATTRS: return "resetxattrs";
+	case CEPH_OSD_OP_RMXATTR: return "rmxattr";
+
+	case CEPH_OSD_OP_PULL: return "pull";
+	case CEPH_OSD_OP_PUSH: return "push";
+	case CEPH_OSD_OP_BALANCEREADS: return "balance-reads";
+	case CEPH_OSD_OP_UNBALANCEREADS: return "unbalance-reads";
+	case CEPH_OSD_OP_SCRUB: return "scrub";
+
+	case CEPH_OSD_OP_WRLOCK: return "wrlock";
+	case CEPH_OSD_OP_WRUNLOCK: return "wrunlock";
+	case CEPH_OSD_OP_RDLOCK: return "rdlock";
+	case CEPH_OSD_OP_RDUNLOCK: return "rdunlock";
+	case CEPH_OSD_OP_UPLOCK: return "uplock";
+	case CEPH_OSD_OP_DNLOCK: return "dnlock";
+
+	case CEPH_OSD_OP_CALL: return "call";
+
+	case CEPH_OSD_OP_PGLS: return "pgls";
+	}
+	return "???";
+}
+
+const char *ceph_mds_state_name(int s)
+{
+	switch (s) {
+		/* down and out */
+	case CEPH_MDS_STATE_DNE:        return "down:dne";
+	case CEPH_MDS_STATE_STOPPED:    return "down:stopped";
+		/* up and out */
+	case CEPH_MDS_STATE_BOOT:       return "up:boot";
+	case CEPH_MDS_STATE_STANDBY:    return "up:standby";
+	case CEPH_MDS_STATE_STANDBY_REPLAY:    return "up:standby-replay";
+	case CEPH_MDS_STATE_CREATING:   return "up:creating";
+	case CEPH_MDS_STATE_STARTING:   return "up:starting";
+		/* up and in */
+	case CEPH_MDS_STATE_REPLAY:     return "up:replay";
+	case CEPH_MDS_STATE_RESOLVE:    return "up:resolve";
+	case CEPH_MDS_STATE_RECONNECT:  return "up:reconnect";
+	case CEPH_MDS_STATE_REJOIN:     return "up:rejoin";
+	case CEPH_MDS_STATE_CLIENTREPLAY: return "up:clientreplay";
+	case CEPH_MDS_STATE_ACTIVE:     return "up:active";
+	case CEPH_MDS_STATE_STOPPING:   return "up:stopping";
+	}
+	return "???";
+}
+
+const char *ceph_session_op_name(int op)
+{
+	switch (op) {
+	case CEPH_SESSION_REQUEST_OPEN: return "request_open";
+	case CEPH_SESSION_OPEN: return "open";
+	case CEPH_SESSION_REQUEST_CLOSE: return "request_close";
+	case CEPH_SESSION_CLOSE: return "close";
+	case CEPH_SESSION_REQUEST_RENEWCAPS: return "request_renewcaps";
+	case CEPH_SESSION_RENEWCAPS: return "renewcaps";
+	case CEPH_SESSION_STALE: return "stale";
+	case CEPH_SESSION_RECALL_STATE: return "recall_state";
+	}
+	return "???";
+}
+
+const char *ceph_mds_op_name(int op)
+{
+	switch (op) {
+	case CEPH_MDS_OP_LOOKUP:  return "lookup";
+	case CEPH_MDS_OP_LOOKUPHASH:  return "lookuphash";
+	case CEPH_MDS_OP_LOOKUPPARENT:  return "lookupparent";
+	case CEPH_MDS_OP_GETATTR:  return "getattr";
+	case CEPH_MDS_OP_SETXATTR: return "setxattr";
+	case CEPH_MDS_OP_SETATTR: return "setattr";
+	case CEPH_MDS_OP_RMXATTR: return "rmxattr";
+	case CEPH_MDS_OP_READDIR: return "readdir";
+	case CEPH_MDS_OP_MKNOD: return "mknod";
+	case CEPH_MDS_OP_LINK: return "link";
+	case CEPH_MDS_OP_UNLINK: return "unlink";
+	case CEPH_MDS_OP_RENAME: return "rename";
+	case CEPH_MDS_OP_MKDIR: return "mkdir";
+	case CEPH_MDS_OP_RMDIR: return "rmdir";
+	case CEPH_MDS_OP_SYMLINK: return "symlink";
+	case CEPH_MDS_OP_CREATE: return "create";
+	case CEPH_MDS_OP_OPEN: return "open";
+	case CEPH_MDS_OP_LOOKUPSNAP: return "lookupsnap";
+	case CEPH_MDS_OP_LSSNAP: return "lssnap";
+	case CEPH_MDS_OP_MKSNAP: return "mksnap";
+	case CEPH_MDS_OP_RMSNAP: return "rmsnap";
+	}
+	return "???";
+}
+
+const char *ceph_cap_op_name(int op)
+{
+	switch (op) {
+	case CEPH_CAP_OP_GRANT: return "grant";
+	case CEPH_CAP_OP_REVOKE: return "revoke";
+	case CEPH_CAP_OP_TRUNC: return "trunc";
+	case CEPH_CAP_OP_EXPORT: return "export";
+	case CEPH_CAP_OP_IMPORT: return "import";
+	case CEPH_CAP_OP_UPDATE: return "update";
+	case CEPH_CAP_OP_DROP: return "drop";
+	case CEPH_CAP_OP_FLUSH: return "flush";
+	case CEPH_CAP_OP_FLUSH_ACK: return "flush_ack";
+	case CEPH_CAP_OP_FLUSHSNAP: return "flushsnap";
+	case CEPH_CAP_OP_FLUSHSNAP_ACK: return "flushsnap_ack";
+	case CEPH_CAP_OP_RELEASE: return "release";
+	case CEPH_CAP_OP_RENEW: return "renew";
+	}
+	return "???";
+}
+
+const char *ceph_lease_op_name(int o)
+{
+	switch (o) {
+	case CEPH_MDS_LEASE_REVOKE: return "revoke";
+	case CEPH_MDS_LEASE_RELEASE: return "release";
+	case CEPH_MDS_LEASE_RENEW: return "renew";
+	case CEPH_MDS_LEASE_REVOKE_ACK: return "revoke_ack";
+	}
+	return "???";
+}
+
+const char *ceph_snap_op_name(int o)
+{
+	switch (o) {
+	case CEPH_SNAP_OP_UPDATE: return "update";
+	case CEPH_SNAP_OP_CREATE: return "create";
+	case CEPH_SNAP_OP_DESTROY: return "destroy";
+	case CEPH_SNAP_OP_SPLIT: return "split";
+	}
+	return "???";
+}
diff --git a/fs/ceph/crush/crush.c b/fs/ceph/crush/crush.c
new file mode 100644
index 000000000000..fabd302e5779
--- /dev/null
+++ b/fs/ceph/crush/crush.c
@@ -0,0 +1,151 @@
+
+#ifdef __KERNEL__
+# include <linux/slab.h>
+#else
+# include <stdlib.h>
+# include <assert.h>
+# define kfree(x) do { if (x) free(x); } while (0)
+# define BUG_ON(x) assert(!(x))
+#endif
+
+#include "crush.h"
+
+const char *crush_bucket_alg_name(int alg)
+{
+	switch (alg) {
+	case CRUSH_BUCKET_UNIFORM: return "uniform";
+	case CRUSH_BUCKET_LIST: return "list";
+	case CRUSH_BUCKET_TREE: return "tree";
+	case CRUSH_BUCKET_STRAW: return "straw";
+	default: return "unknown";
+	}
+}
+
+/**
+ * crush_get_bucket_item_weight - Get weight of an item in given bucket
+ * @b: bucket pointer
+ * @p: item index in bucket
+ */
+int crush_get_bucket_item_weight(struct crush_bucket *b, int p)
+{
+	if (p >= b->size)
+		return 0;
+
+	switch (b->alg) {
+	case CRUSH_BUCKET_UNIFORM:
+		return ((struct crush_bucket_uniform *)b)->item_weight;
+	case CRUSH_BUCKET_LIST:
+		return ((struct crush_bucket_list *)b)->item_weights[p];
+	case CRUSH_BUCKET_TREE:
+		if (p & 1)
+			return ((struct crush_bucket_tree *)b)->node_weights[p];
+		return 0;
+	case CRUSH_BUCKET_STRAW:
+		return ((struct crush_bucket_straw *)b)->item_weights[p];
+	}
+	return 0;
+}
+
+/**
+ * crush_calc_parents - Calculate parent vectors for the given crush map.
+ * @map: crush_map pointer
+ */
+void crush_calc_parents(struct crush_map *map)
+{
+	int i, b, c;
+
+	for (b = 0; b < map->max_buckets; b++) {
+		if (map->buckets[b] == NULL)
+			continue;
+		for (i = 0; i < map->buckets[b]->size; i++) {
+			c = map->buckets[b]->items[i];
+			BUG_ON(c >= map->max_devices ||
+			       c < -map->max_buckets);
+			if (c >= 0)
+				map->device_parents[c] = map->buckets[b]->id;
+			else
+				map->bucket_parents[-1-c] = map->buckets[b]->id;
+		}
+	}
+}
+
+void crush_destroy_bucket_uniform(struct crush_bucket_uniform *b)
+{
+	kfree(b->h.perm);
+	kfree(b->h.items);
+	kfree(b);
+}
+
+void crush_destroy_bucket_list(struct crush_bucket_list *b)
+{
+	kfree(b->item_weights);
+	kfree(b->sum_weights);
+	kfree(b->h.perm);
+	kfree(b->h.items);
+	kfree(b);
+}
+
+void crush_destroy_bucket_tree(struct crush_bucket_tree *b)
+{
+	kfree(b->node_weights);
+	kfree(b);
+}
+
+void crush_destroy_bucket_straw(struct crush_bucket_straw *b)
+{
+	kfree(b->straws);
+	kfree(b->item_weights);
+	kfree(b->h.perm);
+	kfree(b->h.items);
+	kfree(b);
+}
+
+void crush_destroy_bucket(struct crush_bucket *b)
+{
+	switch (b->alg) {
+	case CRUSH_BUCKET_UNIFORM:
+		crush_destroy_bucket_uniform((struct crush_bucket_uniform *)b);
+		break;
+	case CRUSH_BUCKET_LIST:
+		crush_destroy_bucket_list((struct crush_bucket_list *)b);
+		break;
+	case CRUSH_BUCKET_TREE:
+		crush_destroy_bucket_tree((struct crush_bucket_tree *)b);
+		break;
+	case CRUSH_BUCKET_STRAW:
+		crush_destroy_bucket_straw((struct crush_bucket_straw *)b);
+		break;
+	}
+}
+
+/**
+ * crush_destroy - Destroy a crush_map
+ * @map: crush_map pointer
+ */
+void crush_destroy(struct crush_map *map)
+{
+	int b;
+
+	/* buckets */
+	if (map->buckets) {
+		for (b = 0; b < map->max_buckets; b++) {
+			if (map->buckets[b] == NULL)
+				continue;
+			crush_destroy_bucket(map->buckets[b]);
+		}
+		kfree(map->buckets);
+	}
+
+	/* rules */
+	if (map->rules) {
+		for (b = 0; b < map->max_rules; b++)
+			kfree(map->rules[b]);
+		kfree(map->rules);
+	}
+
+	kfree(map->bucket_parents);
+	kfree(map->device_parents);
+	kfree(map);
+}
+
+
diff --git a/fs/ceph/crush/crush.h b/fs/ceph/crush/crush.h
new file mode 100644
index 000000000000..dcd7e7523700
--- /dev/null
+++ b/fs/ceph/crush/crush.h
@@ -0,0 +1,180 @@
+#ifndef _CRUSH_CRUSH_H
+#define _CRUSH_CRUSH_H
+
+#include <linux/types.h>
+
+/*
+ * CRUSH is a pseudo-random data distribution algorithm that
+ * efficiently distributes input values (typically, data objects)
+ * across a heterogeneous, structured storage cluster.
+ *
+ * The algorithm was originally described in detail in this paper
+ * (although the algorithm has evolved somewhat since then):
+ *
+ *     http://www.ssrc.ucsc.edu/Papers/weil-sc06.pdf
+ *
+ * LGPL2
+ */
+
+
+#define CRUSH_MAGIC 0x00010000ul   /* for detecting algorithm revisions */
+
+
+#define CRUSH_MAX_DEPTH 10  /* max crush hierarchy depth */
+#define CRUSH_MAX_SET   10  /* max size of a mapping result */
+
+
+/*
+ * CRUSH uses user-defined "rules" to describe how inputs should be
+ * mapped to devices.  A rule consists of sequence of steps to perform
+ * to generate the set of output devices.
+ */
+struct crush_rule_step {
+	__u32 op;
+	__s32 arg1;
+	__s32 arg2;
+};
+
+/* step op codes */
+enum {
+	CRUSH_RULE_NOOP = 0,
+	CRUSH_RULE_TAKE = 1,          /* arg1 = value to start with */
+	CRUSH_RULE_CHOOSE_FIRSTN = 2, /* arg1 = num items to pick */
+				      /* arg2 = type */
+	CRUSH_RULE_CHOOSE_INDEP = 3,  /* same */
+	CRUSH_RULE_EMIT = 4,          /* no args */
+	CRUSH_RULE_CHOOSE_LEAF_FIRSTN = 6,
+	CRUSH_RULE_CHOOSE_LEAF_INDEP = 7,
+};
+
+/*
+ * for specifying choose num (arg1) relative to the max parameter
+ * passed to do_rule
+ */
+#define CRUSH_CHOOSE_N            0
+#define CRUSH_CHOOSE_N_MINUS(x)   (-(x))
+
+/*
+ * The rule mask is used to describe what the rule is intended for.
+ * Given a ruleset and size of output set, we search through the
+ * rule list for a matching rule_mask.
+ */
+struct crush_rule_mask {
+	__u8 ruleset;
+	__u8 type;
+	__u8 min_size;
+	__u8 max_size;
+};
+
+struct crush_rule {
+	__u32 len;
+	struct crush_rule_mask mask;
+	struct crush_rule_step steps[0];
+};
+
+#define crush_rule_size(len) (sizeof(struct crush_rule) + \
+			      (len)*sizeof(struct crush_rule_step))
+
+
+
+/*
+ * A bucket is a named container of other items (either devices or
+ * other buckets).  Items within a bucket are chosen using one of a
+ * few different algorithms.  The table summarizes how the speed of
+ * each option measures up against mapping stability when items are
+ * added or removed.
+ *
+ *  Bucket Alg     Speed       Additions    Removals
+ *  ------------------------------------------------
+ *  uniform         O(1)       poor         poor
+ *  list            O(n)       optimal      poor
+ *  tree            O(log n)   good         good
+ *  straw           O(n)       optimal      optimal
+ */
+enum {
+	CRUSH_BUCKET_UNIFORM = 1,
+	CRUSH_BUCKET_LIST = 2,
+	CRUSH_BUCKET_TREE = 3,
+	CRUSH_BUCKET_STRAW = 4
+};
+extern const char *crush_bucket_alg_name(int alg);
+
+struct crush_bucket {
+	__s32 id;        /* this'll be negative */
+	__u16 type;      /* non-zero; type=0 is reserved for devices */
+	__u8 alg;        /* one of CRUSH_BUCKET_* */
+	__u8 hash;       /* which hash function to use, CRUSH_HASH_* */
+	__u32 weight;    /* 16-bit fixed point */
+	__u32 size;      /* num items */
+	__s32 *items;
+
+	/*
+	 * cached random permutation: used for uniform bucket and for
+	 * the linear search fallback for the other bucket types.
+	 */
+	__u32 perm_x;  /* @x for which *perm is defined */
+	__u32 perm_n;  /* num elements of *perm that are permuted/defined */
+	__u32 *perm;
+};
+
+struct crush_bucket_uniform {
+	struct crush_bucket h;
+	__u32 item_weight;  /* 16-bit fixed point; all items equally weighted */
+};
+
+struct crush_bucket_list {
+	struct crush_bucket h;
+	__u32 *item_weights;  /* 16-bit fixed point */
+	__u32 *sum_weights;   /* 16-bit fixed point.  element i is sum
+				 of weights 0..i, inclusive */
+};
+
+struct crush_bucket_tree {
+	struct crush_bucket h;  /* note: h.size is _tree_ size, not number of
+				   actual items */
+	__u8 num_nodes;
+	__u32 *node_weights;
+};
+
+struct crush_bucket_straw {
+	struct crush_bucket h;
+	__u32 *item_weights;   /* 16-bit fixed point */
+	__u32 *straws;         /* 16-bit fixed point */
+};
+
+
+
+/*
+ * CRUSH map includes all buckets, rules, etc.
+ */
+struct crush_map {
+	struct crush_bucket **buckets;
+	struct crush_rule **rules;
+
+	/*
+	 * Parent pointers to identify the parent bucket a device or
+	 * bucket in the hierarchy.  If an item appears more than
+	 * once, this is the _last_ time it appeared (where buckets
+	 * are processed in bucket id order, from -1 on down to
+	 * -max_buckets.
+	 */
+	__u32 *bucket_parents;
+	__u32 *device_parents;
+
+	__s32 max_buckets;
+	__u32 max_rules;
+	__s32 max_devices;
+};
+
+
+/* crush.c */
+extern int crush_get_bucket_item_weight(struct crush_bucket *b, int pos);
+extern void crush_calc_parents(struct crush_map *map);
+extern void crush_destroy_bucket_uniform(struct crush_bucket_uniform *b);
+extern void crush_destroy_bucket_list(struct crush_bucket_list *b);
+extern void crush_destroy_bucket_tree(struct crush_bucket_tree *b);
+extern void crush_destroy_bucket_straw(struct crush_bucket_straw *b);
+extern void crush_destroy_bucket(struct crush_bucket *b);
+extern void crush_destroy(struct crush_map *map);
+
+#endif
diff --git a/fs/ceph/crush/hash.c b/fs/ceph/crush/hash.c
new file mode 100644
index 000000000000..5873aed694bf
--- /dev/null
+++ b/fs/ceph/crush/hash.c
@@ -0,0 +1,149 @@
+
+#include <linux/types.h>
+#include "hash.h"
+
+/*
+ * Robert Jenkins' function for mixing 32-bit values
+ * http://burtleburtle.net/bob/hash/evahash.html
+ * a, b = random bits, c = input and output
+ */
+#define crush_hashmix(a, b, c) do {			\
+		a = a-b;  a = a-c;  a = a^(c>>13);	\
+		b = b-c;  b = b-a;  b = b^(a<<8);	\
+		c = c-a;  c = c-b;  c = c^(b>>13);	\
+		a = a-b;  a = a-c;  a = a^(c>>12);	\
+		b = b-c;  b = b-a;  b = b^(a<<16);	\
+		c = c-a;  c = c-b;  c = c^(b>>5);	\
+		a = a-b;  a = a-c;  a = a^(c>>3);	\
+		b = b-c;  b = b-a;  b = b^(a<<10);	\
+		c = c-a;  c = c-b;  c = c^(b>>15);	\
+	} while (0)
+
+#define crush_hash_seed 1315423911
+
+static __u32 crush_hash32_rjenkins1(__u32 a)
+{
+	__u32 hash = crush_hash_seed ^ a;
+	__u32 b = a;
+	__u32 x = 231232;
+	__u32 y = 1232;
+	crush_hashmix(b, x, hash);
+	crush_hashmix(y, a, hash);
+	return hash;
+}
+
+static __u32 crush_hash32_rjenkins1_2(__u32 a, __u32 b)
+{
+	__u32 hash = crush_hash_seed ^ a ^ b;
+	__u32 x = 231232;
+	__u32 y = 1232;
+	crush_hashmix(a, b, hash);
+	crush_hashmix(x, a, hash);
+	crush_hashmix(b, y, hash);
+	return hash;
+}
+
+static __u32 crush_hash32_rjenkins1_3(__u32 a, __u32 b, __u32 c)
+{
+	__u32 hash = crush_hash_seed ^ a ^ b ^ c;
+	__u32 x = 231232;
+	__u32 y = 1232;
+	crush_hashmix(a, b, hash);
+	crush_hashmix(c, x, hash);
+	crush_hashmix(y, a, hash);
+	crush_hashmix(b, x, hash);
+	crush_hashmix(y, c, hash);
+	return hash;
+}
+
+static __u32 crush_hash32_rjenkins1_4(__u32 a, __u32 b, __u32 c, __u32 d)
+{
+	__u32 hash = crush_hash_seed ^ a ^ b ^ c ^ d;
+	__u32 x = 231232;
+	__u32 y = 1232;
+	crush_hashmix(a, b, hash);
+	crush_hashmix(c, d, hash);
+	crush_hashmix(a, x, hash);
+	crush_hashmix(y, b, hash);
+	crush_hashmix(c, x, hash);
+	crush_hashmix(y, d, hash);
+	return hash;
+}
+
+static __u32 crush_hash32_rjenkins1_5(__u32 a, __u32 b, __u32 c, __u32 d,
+				      __u32 e)
+{
+	__u32 hash = crush_hash_seed ^ a ^ b ^ c ^ d ^ e;
+	__u32 x = 231232;
+	__u32 y = 1232;
+	crush_hashmix(a, b, hash);
+	crush_hashmix(c, d, hash);
+	crush_hashmix(e, x, hash);
+	crush_hashmix(y, a, hash);
+	crush_hashmix(b, x, hash);
+	crush_hashmix(y, c, hash);
+	crush_hashmix(d, x, hash);
+	crush_hashmix(y, e, hash);
+	return hash;
+}
+
+
+__u32 crush_hash32(int type, __u32 a)
+{
+	switch (type) {
+	case CRUSH_HASH_RJENKINS1:
+		return crush_hash32_rjenkins1(a);
+	default:
+		return 0;
+	}
+}
+
+__u32 crush_hash32_2(int type, __u32 a, __u32 b)
+{
+	switch (type) {
+	case CRUSH_HASH_RJENKINS1:
+		return crush_hash32_rjenkins1_2(a, b);
+	default:
+		return 0;
+	}
+}
+
+__u32 crush_hash32_3(int type, __u32 a, __u32 b, __u32 c)
+{
+	switch (type) {
+	case CRUSH_HASH_RJENKINS1:
+		return crush_hash32_rjenkins1_3(a, b, c);
+	default:
+		return 0;
+	}
+}
+
+__u32 crush_hash32_4(int type, __u32 a, __u32 b, __u32 c, __u32 d)
+{
+	switch (type) {
+	case CRUSH_HASH_RJENKINS1:
+		return crush_hash32_rjenkins1_4(a, b, c, d);
+	default:
+		return 0;
+	}
+}
+
+__u32 crush_hash32_5(int type, __u32 a, __u32 b, __u32 c, __u32 d, __u32 e)
+{
+	switch (type) {
+	case CRUSH_HASH_RJENKINS1:
+		return crush_hash32_rjenkins1_5(a, b, c, d, e);
+	default:
+		return 0;
+	}
+}
+
+const char *crush_hash_name(int type)
+{
+	switch (type) {
+	case CRUSH_HASH_RJENKINS1:
+		return "rjenkins1";
+	default:
+		return "unknown";
+	}
+}
diff --git a/fs/ceph/crush/hash.h b/fs/ceph/crush/hash.h
new file mode 100644
index 000000000000..ff48e110e4bb
--- /dev/null
+++ b/fs/ceph/crush/hash.h
@@ -0,0 +1,17 @@
+#ifndef _CRUSH_HASH_H
+#define _CRUSH_HASH_H
+
+#define CRUSH_HASH_RJENKINS1   0
+
+#define CRUSH_HASH_DEFAULT CRUSH_HASH_RJENKINS1
+
+extern const char *crush_hash_name(int type);
+
+extern __u32 crush_hash32(int type, __u32 a);
+extern __u32 crush_hash32_2(int type, __u32 a, __u32 b);
+extern __u32 crush_hash32_3(int type, __u32 a, __u32 b, __u32 c);
+extern __u32 crush_hash32_4(int type, __u32 a, __u32 b, __u32 c, __u32 d);
+extern __u32 crush_hash32_5(int type, __u32 a, __u32 b, __u32 c, __u32 d,
+			    __u32 e);
+
+#endif
diff --git a/fs/ceph/crush/mapper.c b/fs/ceph/crush/mapper.c
new file mode 100644
index 000000000000..9ba54efb6543
--- /dev/null
+++ b/fs/ceph/crush/mapper.c
@@ -0,0 +1,596 @@
+
+#ifdef __KERNEL__
+# include <linux/string.h>
+# include <linux/slab.h>
+# include <linux/bug.h>
+# include <linux/kernel.h>
+# ifndef dprintk
+#  define dprintk(args...)
+# endif
+#else
+# include <string.h>
+# include <stdio.h>
+# include <stdlib.h>
+# include <assert.h>
+# define BUG_ON(x) assert(!(x))
+# define dprintk(args...) /* printf(args) */
+# define kmalloc(x, f) malloc(x)
+# define kfree(x) free(x)
+#endif
+
+#include "crush.h"
+#include "hash.h"
+
+/*
+ * Implement the core CRUSH mapping algorithm.
+ */
+
+/**
+ * crush_find_rule - find a crush_rule id for a given ruleset, type, and size.
+ * @map: the crush_map
+ * @ruleset: the storage ruleset id (user defined)
+ * @type: storage ruleset type (user defined)
+ * @size: output set size
+ */
+int crush_find_rule(struct crush_map *map, int ruleset, int type, int size)
+{
+	int i;
+
+	for (i = 0; i < map->max_rules; i++) {
+		if (map->rules[i] &&
+		    map->rules[i]->mask.ruleset == ruleset &&
+		    map->rules[i]->mask.type == type &&
+		    map->rules[i]->mask.min_size <= size &&
+		    map->rules[i]->mask.max_size >= size)
+			return i;
+	}
+	return -1;
+}
+
+
+/*
+ * bucket choose methods
+ *
+ * For each bucket algorithm, we have a "choose" method that, given a
+ * crush input @x and replica position (usually, position in output set) @r,
+ * will produce an item in the bucket.
+ */
+
+/*
+ * Choose based on a random permutation of the bucket.
+ *
+ * We used to use some prime number arithmetic to do this, but it
+ * wasn't very random, and had some other bad behaviors.  Instead, we
+ * calculate an actual random permutation of the bucket members.
+ * Since this is expensive, we optimize for the r=0 case, which
+ * captures the vast majority of calls.
+ */
+static int bucket_perm_choose(struct crush_bucket *bucket,
+			      int x, int r)
+{
+	unsigned pr = r % bucket->size;
+	unsigned i, s;
+
+	/* start a new permutation if @x has changed */
+	if (bucket->perm_x != x || bucket->perm_n == 0) {
+		dprintk("bucket %d new x=%d\n", bucket->id, x);
+		bucket->perm_x = x;
+
+		/* optimize common r=0 case */
+		if (pr == 0) {
+			s = crush_hash32_3(bucket->hash, x, bucket->id, 0) %
+				bucket->size;
+			bucket->perm[0] = s;
+			bucket->perm_n = 0xffff;   /* magic value, see below */
+			goto out;
+		}
+
+		for (i = 0; i < bucket->size; i++)
+			bucket->perm[i] = i;
+		bucket->perm_n = 0;
+	} else if (bucket->perm_n == 0xffff) {
+		/* clean up after the r=0 case above */
+		for (i = 1; i < bucket->size; i++)
+			bucket->perm[i] = i;
+		bucket->perm[bucket->perm[0]] = 0;
+		bucket->perm_n = 1;
+	}
+
+	/* calculate permutation up to pr */
+	for (i = 0; i < bucket->perm_n; i++)
+		dprintk(" perm_choose have %d: %d\n", i, bucket->perm[i]);
+	while (bucket->perm_n <= pr) {
+		unsigned p = bucket->perm_n;
+		/* no point in swapping the final entry */
+		if (p < bucket->size - 1) {
+			i = crush_hash32_3(bucket->hash, x, bucket->id, p) %
+				(bucket->size - p);
+			if (i) {
+				unsigned t = bucket->perm[p + i];
+				bucket->perm[p + i] = bucket->perm[p];
+				bucket->perm[p] = t;
+			}
+			dprintk(" perm_choose swap %d with %d\n", p, p+i);
+		}
+		bucket->perm_n++;
+	}
+	for (i = 0; i < bucket->size; i++)
+		dprintk(" perm_choose  %d: %d\n", i, bucket->perm[i]);
+
+	s = bucket->perm[pr];
+out:
+	dprintk(" perm_choose %d sz=%d x=%d r=%d (%d) s=%d\n", bucket->id,
+		bucket->size, x, r, pr, s);
+	return bucket->items[s];
+}
+
+/* uniform */
+static int bucket_uniform_choose(struct crush_bucket_uniform *bucket,
+				 int x, int r)
+{
+	return bucket_perm_choose(&bucket->h, x, r);
+}
+
+/* list */
+static int bucket_list_choose(struct crush_bucket_list *bucket,
+			      int x, int r)
+{
+	int i;
+
+	for (i = bucket->h.size-1; i >= 0; i--) {
+		__u64 w = crush_hash32_4(bucket->h.hash,x, bucket->h.items[i],
+					 r, bucket->h.id);
+		w &= 0xffff;
+		dprintk("list_choose i=%d x=%d r=%d item %d weight %x "
+			"sw %x rand %llx",
+			i, x, r, bucket->h.items[i], bucket->item_weights[i],
+			bucket->sum_weights[i], w);
+		w *= bucket->sum_weights[i];
+		w = w >> 16;
+		/*dprintk(" scaled %llx\n", w);*/
+		if (w < bucket->item_weights[i])
+			return bucket->h.items[i];
+	}
+
+	BUG_ON(1);
+	return 0;
+}
+
+
+/* (binary) tree */
+static int height(int n)
+{
+	int h = 0;
+	while ((n & 1) == 0) {
+		h++;
+		n = n >> 1;
+	}
+	return h;
+}
+
+static int left(int x)
+{
+	int h = height(x);
+	return x - (1 << (h-1));
+}
+
+static int right(int x)
+{
+	int h = height(x);
+	return x + (1 << (h-1));
+}
+
+static int terminal(int x)
+{
+	return x & 1;
+}
+
+static int bucket_tree_choose(struct crush_bucket_tree *bucket,
+			      int x, int r)
+{
+	int n, l;
+	__u32 w;
+	__u64 t;
+
+	/* start at root */
+	n = bucket->num_nodes >> 1;
+
+	while (!terminal(n)) {
+		/* pick point in [0, w) */
+		w = bucket->node_weights[n];
+		t = (__u64)crush_hash32_4(bucket->h.hash, x, n, r,
+					  bucket->h.id) * (__u64)w;
+		t = t >> 32;
+
+		/* descend to the left or right? */
+		l = left(n);
+		if (t < bucket->node_weights[l])
+			n = l;
+		else
+			n = right(n);
+	}
+
+	return bucket->h.items[n >> 1];
+}
+
+
+/* straw */
+
+static int bucket_straw_choose(struct crush_bucket_straw *bucket,
+			       int x, int r)
+{
+	int i;
+	int high = 0;
+	__u64 high_draw = 0;
+	__u64 draw;
+
+	for (i = 0; i < bucket->h.size; i++) {
+		draw = crush_hash32_3(bucket->h.hash, x, bucket->h.items[i], r);
+		draw &= 0xffff;
+		draw *= bucket->straws[i];
+		if (i == 0 || draw > high_draw) {
+			high = i;
+			high_draw = draw;
+		}
+	}
+	return bucket->h.items[high];
+}
+
+static int crush_bucket_choose(struct crush_bucket *in, int x, int r)
+{
+	dprintk("choose %d x=%d r=%d\n", in->id, x, r);
+	switch (in->alg) {
+	case CRUSH_BUCKET_UNIFORM:
+		return bucket_uniform_choose((struct crush_bucket_uniform *)in,
+					  x, r);
+	case CRUSH_BUCKET_LIST:
+		return bucket_list_choose((struct crush_bucket_list *)in,
+					  x, r);
+	case CRUSH_BUCKET_TREE:
+		return bucket_tree_choose((struct crush_bucket_tree *)in,
+					  x, r);
+	case CRUSH_BUCKET_STRAW:
+		return bucket_straw_choose((struct crush_bucket_straw *)in,
+					   x, r);
+	default:
+		BUG_ON(1);
+		return in->items[0];
+	}
+}
+
+/*
+ * true if device is marked "out" (failed, fully offloaded)
+ * of the cluster
+ */
+static int is_out(struct crush_map *map, __u32 *weight, int item, int x)
+{
+	if (weight[item] >= 0x1000)
+		return 0;
+	if (weight[item] == 0)
+		return 1;
+	if ((crush_hash32_2(CRUSH_HASH_RJENKINS1, x, item) & 0xffff)
+	    < weight[item])
+		return 0;
+	return 1;
+}
+
+/**
+ * crush_choose - choose numrep distinct items of given type
+ * @map: the crush_map
+ * @bucket: the bucket we are choose an item from
+ * @x: crush input value
+ * @numrep: the number of items to choose
+ * @type: the type of item to choose
+ * @out: pointer to output vector
+ * @outpos: our position in that vector
+ * @firstn: true if choosing "first n" items, false if choosing "indep"
+ * @recurse_to_leaf: true if we want one device under each item of given type
+ * @out2: second output vector for leaf items (if @recurse_to_leaf)
+ */
+static int crush_choose(struct crush_map *map,
+			struct crush_bucket *bucket,
+			__u32 *weight,
+			int x, int numrep, int type,
+			int *out, int outpos,
+			int firstn, int recurse_to_leaf,
+			int *out2)
+{
+	int rep;
+	int ftotal, flocal;
+	int retry_descent, retry_bucket, skip_rep;
+	struct crush_bucket *in = bucket;
+	int r;
+	int i;
+	int item = 0;
+	int itemtype;
+	int collide, reject;
+	const int orig_tries = 5; /* attempts before we fall back to search */
+	dprintk("choose bucket %d x %d outpos %d\n", bucket->id, x, outpos);
+
+	for (rep = outpos; rep < numrep; rep++) {
+		/* keep trying until we get a non-out, non-colliding item */
+		ftotal = 0;
+		skip_rep = 0;
+		do {
+			retry_descent = 0;
+			in = bucket;               /* initial bucket */
+
+			/* choose through intervening buckets */
+			flocal = 0;
+			do {
+				collide = 0;
+				retry_bucket = 0;
+				r = rep;
+				if (in->alg == CRUSH_BUCKET_UNIFORM) {
+					/* be careful */
+					if (firstn || numrep >= in->size)
+						/* r' = r + f_total */
+						r += ftotal;
+					else if (in->size % numrep == 0)
+						/* r'=r+(n+1)*f_local */
+						r += (numrep+1) *
+							(flocal+ftotal);
+					else
+						/* r' = r + n*f_local */
+						r += numrep * (flocal+ftotal);
+				} else {
+					if (firstn)
+						/* r' = r + f_total */
+						r += ftotal;
+					else
+						/* r' = r + n*f_local */
+						r += numrep * (flocal+ftotal);
+				}
+
+				/* bucket choose */
+				if (in->size == 0) {
+					reject = 1;
+					goto reject;
+				}
+				if (flocal >= (in->size>>1) &&
+				    flocal > orig_tries)
+					item = bucket_perm_choose(in, x, r);
+				else
+					item = crush_bucket_choose(in, x, r);
+				BUG_ON(item >= map->max_devices);
+
+				/* desired type? */
+				if (item < 0)
+					itemtype = map->buckets[-1-item]->type;
+				else
+					itemtype = 0;
+				dprintk("  item %d type %d\n", item, itemtype);
+
+				/* keep going? */
+				if (itemtype != type) {
+					BUG_ON(item >= 0 ||
+					       (-1-item) >= map->max_buckets);
+					in = map->buckets[-1-item];
+					continue;
+				}
+
+				/* collision? */
+				for (i = 0; i < outpos; i++) {
+					if (out[i] == item) {
+						collide = 1;
+						break;
+					}
+				}
+
+				if (recurse_to_leaf &&
+				    item < 0 &&
+				    crush_choose(map, map->buckets[-1-item],
+						 weight,
+						 x, outpos+1, 0,
+						 out2, outpos,
+						 firstn, 0, NULL) <= outpos) {
+					reject = 1;
+				} else {
+					/* out? */
+					if (itemtype == 0)
+						reject = is_out(map, weight,
+								item, x);
+					else
+						reject = 0;
+				}
+
+reject:
+				if (reject || collide) {
+					ftotal++;
+					flocal++;
+
+					if (collide && flocal < 3)
+						/* retry locally a few times */
+						retry_bucket = 1;
+					else if (flocal < in->size + orig_tries)
+						/* exhaustive bucket search */
+						retry_bucket = 1;
+					else if (ftotal < 20)
+						/* then retry descent */
+						retry_descent = 1;
+					else
+						/* else give up */
+						skip_rep = 1;
+					dprintk("  reject %d  collide %d  "
+						"ftotal %d  flocal %d\n",
+						reject, collide, ftotal,
+						flocal);
+				}
+			} while (retry_bucket);
+		} while (retry_descent);
+
+		if (skip_rep) {
+			dprintk("skip rep\n");
+			continue;
+		}
+
+		dprintk("choose got %d\n", item);
+		out[outpos] = item;
+		outpos++;
+	}
+
+	dprintk("choose returns %d\n", outpos);
+	return outpos;
+}
+
+
+/**
+ * crush_do_rule - calculate a mapping with the given input and rule
+ * @map: the crush_map
+ * @ruleno: the rule id
+ * @x: hash input
+ * @result: pointer to result vector
+ * @result_max: maximum result size
+ * @force: force initial replica choice; -1 for none
+ */
+int crush_do_rule(struct crush_map *map,
+		  int ruleno, int x, int *result, int result_max,
+		  int force, __u32 *weight)
+{
+	int result_len;
+	int force_context[CRUSH_MAX_DEPTH];
+	int force_pos = -1;
+	int a[CRUSH_MAX_SET];
+	int b[CRUSH_MAX_SET];
+	int c[CRUSH_MAX_SET];
+	int recurse_to_leaf;
+	int *w;
+	int wsize = 0;
+	int *o;
+	int osize;
+	int *tmp;
+	struct crush_rule *rule;
+	int step;
+	int i, j;
+	int numrep;
+	int firstn;
+	int rc = -1;
+
+	BUG_ON(ruleno >= map->max_rules);
+
+	rule = map->rules[ruleno];
+	result_len = 0;
+	w = a;
+	o = b;
+
+	/*
+	 * determine hierarchical context of force, if any.  note
+	 * that this may or may not correspond to the specific types
+	 * referenced by the crush rule.
+	 */
+	if (force >= 0) {
+		if (force >= map->max_devices ||
+		    map->device_parents[force] == 0) {
+			/*dprintk("CRUSH: forcefed device dne\n");*/
+			rc = -1;  /* force fed device dne */
+			goto out;
+		}
+		if (!is_out(map, weight, force, x)) {
+			while (1) {
+				force_context[++force_pos] = force;
+				if (force >= 0)
+					force = map->device_parents[force];
+				else
+					force = map->bucket_parents[-1-force];
+				if (force == 0)
+					break;
+			}
+		}
+	}
+
+	for (step = 0; step < rule->len; step++) {
+		firstn = 0;
+		switch (rule->steps[step].op) {
+		case CRUSH_RULE_TAKE:
+			w[0] = rule->steps[step].arg1;
+			if (force_pos >= 0) {
+				BUG_ON(force_context[force_pos] != w[0]);
+				force_pos--;
+			}
+			wsize = 1;
+			break;
+
+		case CRUSH_RULE_CHOOSE_LEAF_FIRSTN:
+		case CRUSH_RULE_CHOOSE_FIRSTN:
+			firstn = 1;
+		case CRUSH_RULE_CHOOSE_LEAF_INDEP:
+		case CRUSH_RULE_CHOOSE_INDEP:
+			BUG_ON(wsize == 0);
+
+			recurse_to_leaf =
+				rule->steps[step].op ==
+				 CRUSH_RULE_CHOOSE_LEAF_FIRSTN ||
+				rule->steps[step].op ==
+				CRUSH_RULE_CHOOSE_LEAF_INDEP;
+
+			/* reset output */
+			osize = 0;
+
+			for (i = 0; i < wsize; i++) {
+				/*
+				 * see CRUSH_N, CRUSH_N_MINUS macros.
+				 * basically, numrep <= 0 means relative to
+				 * the provided result_max
+				 */
+				numrep = rule->steps[step].arg1;
+				if (numrep <= 0) {
+					numrep += result_max;
+					if (numrep <= 0)
+						continue;
+				}
+				j = 0;
+				if (osize == 0 && force_pos >= 0) {
+					/* skip any intermediate types */
+					while (force_pos &&
+					       force_context[force_pos] < 0 &&
+					       rule->steps[step].arg2 !=
+					       map->buckets[-1 -
+					       force_context[force_pos]]->type)
+						force_pos--;
+					o[osize] = force_context[force_pos];
+					if (recurse_to_leaf)
+						c[osize] = force_context[0];
+					j++;
+					force_pos--;
+				}
+				osize += crush_choose(map,
+						      map->buckets[-1-w[i]],
+						      weight,
+						      x, numrep,
+						      rule->steps[step].arg2,
+						      o+osize, j,
+						      firstn,
+						      recurse_to_leaf, c+osize);
+			}
+
+			if (recurse_to_leaf)
+				/* copy final _leaf_ values to output set */
+				memcpy(o, c, osize*sizeof(*o));
+
+			/* swap t and w arrays */
+			tmp = o;
+			o = w;
+			w = tmp;
+			wsize = osize;
+			break;
+
+
+		case CRUSH_RULE_EMIT:
+			for (i = 0; i < wsize && result_len < result_max; i++) {
+				result[result_len] = w[i];
+				result_len++;
+			}
+			wsize = 0;
+			break;
+
+		default:
+			BUG_ON(1);
+		}
+	}
+	rc = result_len;
+
+out:
+	return rc;
+}
+
+
diff --git a/fs/ceph/crush/mapper.h b/fs/ceph/crush/mapper.h
new file mode 100644
index 000000000000..98e90046fd9f
--- /dev/null
+++ b/fs/ceph/crush/mapper.h
@@ -0,0 +1,20 @@
+#ifndef _CRUSH_MAPPER_H
+#define _CRUSH_MAPPER_H
+
+/*
+ * CRUSH functions for find rules and then mapping an input to an
+ * output set.
+ *
+ * LGPL2
+ */
+
+#include "crush.h"
+
+extern int crush_find_rule(struct crush_map *map, int pool, int type, int size);
+extern int crush_do_rule(struct crush_map *map,
+			 int ruleno,
+			 int x, int *result, int result_max,
+			 int forcefeed,    /* -1 for none */
+			 __u32 *weights);
+
+#endif
diff --git a/fs/ceph/crypto.c b/fs/ceph/crypto.c
new file mode 100644
index 000000000000..291ac288e791
--- /dev/null
+++ b/fs/ceph/crypto.c
@@ -0,0 +1,408 @@
+
+#include "ceph_debug.h"
+
+#include <linux/err.h>
+#include <linux/scatterlist.h>
+#include <crypto/hash.h>
+
+#include "crypto.h"
+#include "decode.h"
+
+int ceph_crypto_key_encode(struct ceph_crypto_key *key, void **p, void *end)
+{
+	if (*p + sizeof(u16) + sizeof(key->created) +
+	    sizeof(u16) + key->len > end)
+		return -ERANGE;
+	ceph_encode_16(p, key->type);
+	ceph_encode_copy(p, &key->created, sizeof(key->created));
+	ceph_encode_16(p, key->len);
+	ceph_encode_copy(p, key->key, key->len);
+	return 0;
+}
+
+int ceph_crypto_key_decode(struct ceph_crypto_key *key, void **p, void *end)
+{
+	ceph_decode_need(p, end, 2*sizeof(u16) + sizeof(key->created), bad);
+	key->type = ceph_decode_16(p);
+	ceph_decode_copy(p, &key->created, sizeof(key->created));
+	key->len = ceph_decode_16(p);
+	ceph_decode_need(p, end, key->len, bad);
+	key->key = kmalloc(key->len, GFP_NOFS);
+	if (!key->key)
+		return -ENOMEM;
+	ceph_decode_copy(p, key->key, key->len);
+	return 0;
+
+bad:
+	dout("failed to decode crypto key\n");
+	return -EINVAL;
+}
+
+int ceph_crypto_key_unarmor(struct ceph_crypto_key *key, const char *inkey)
+{
+	int inlen = strlen(inkey);
+	int blen = inlen * 3 / 4;
+	void *buf, *p;
+	int ret;
+
+	dout("crypto_key_unarmor %s\n", inkey);
+	buf = kmalloc(blen, GFP_NOFS);
+	if (!buf)
+		return -ENOMEM;
+	blen = ceph_unarmor(buf, inkey, inkey+inlen);
+	if (blen < 0) {
+		kfree(buf);
+		return blen;
+	}
+
+	p = buf;
+	ret = ceph_crypto_key_decode(key, &p, p + blen);
+	kfree(buf);
+	if (ret)
+		return ret;
+	dout("crypto_key_unarmor key %p type %d len %d\n", key,
+	     key->type, key->len);
+	return 0;
+}
+
+
+
+#define AES_KEY_SIZE 16
+
+static struct crypto_blkcipher *ceph_crypto_alloc_cipher(void)
+{
+	return crypto_alloc_blkcipher("cbc(aes)", 0, CRYPTO_ALG_ASYNC);
+}
+
+const u8 *aes_iv = "cephsageyudagreg";
+
+int ceph_aes_encrypt(const void *key, int key_len, void *dst, size_t *dst_len,
+		     const void *src, size_t src_len)
+{
+	struct scatterlist sg_in[2], sg_out[1];
+	struct crypto_blkcipher *tfm = ceph_crypto_alloc_cipher();
+	struct blkcipher_desc desc = { .tfm = tfm, .flags = 0 };
+	int ret;
+	void *iv;
+	int ivsize;
+	size_t zero_padding = (0x10 - (src_len & 0x0f));
+	char pad[16];
+
+	if (IS_ERR(tfm))
+		return PTR_ERR(tfm);
+
+	memset(pad, zero_padding, zero_padding);
+
+	*dst_len = src_len + zero_padding;
+
+	crypto_blkcipher_setkey((void *)tfm, key, key_len);
+	sg_init_table(sg_in, 2);
+	sg_set_buf(&sg_in[0], src, src_len);
+	sg_set_buf(&sg_in[1], pad, zero_padding);
+	sg_init_table(sg_out, 1);
+	sg_set_buf(sg_out, dst, *dst_len);
+	iv = crypto_blkcipher_crt(tfm)->iv;
+	ivsize = crypto_blkcipher_ivsize(tfm);
+
+	memcpy(iv, aes_iv, ivsize);
+	/*
+	print_hex_dump(KERN_ERR, "enc key: ", DUMP_PREFIX_NONE, 16, 1,
+		       key, key_len, 1);
+	print_hex_dump(KERN_ERR, "enc src: ", DUMP_PREFIX_NONE, 16, 1,
+			src, src_len, 1);
+	print_hex_dump(KERN_ERR, "enc pad: ", DUMP_PREFIX_NONE, 16, 1,
+			pad, zero_padding, 1);
+	*/
+	ret = crypto_blkcipher_encrypt(&desc, sg_out, sg_in,
+				     src_len + zero_padding);
+	crypto_free_blkcipher(tfm);
+	if (ret < 0)
+		pr_err("ceph_aes_crypt failed %d\n", ret);
+	/*
+	print_hex_dump(KERN_ERR, "enc out: ", DUMP_PREFIX_NONE, 16, 1,
+		       dst, *dst_len, 1);
+	*/
+	return 0;
+}
+
+int ceph_aes_encrypt2(const void *key, int key_len, void *dst, size_t *dst_len,
+		      const void *src1, size_t src1_len,
+		      const void *src2, size_t src2_len)
+{
+	struct scatterlist sg_in[3], sg_out[1];
+	struct crypto_blkcipher *tfm = ceph_crypto_alloc_cipher();
+	struct blkcipher_desc desc = { .tfm = tfm, .flags = 0 };
+	int ret;
+	void *iv;
+	int ivsize;
+	size_t zero_padding = (0x10 - ((src1_len + src2_len) & 0x0f));
+	char pad[16];
+
+	if (IS_ERR(tfm))
+		return PTR_ERR(tfm);
+
+	memset(pad, zero_padding, zero_padding);
+
+	*dst_len = src1_len + src2_len + zero_padding;
+
+	crypto_blkcipher_setkey((void *)tfm, key, key_len);
+	sg_init_table(sg_in, 3);
+	sg_set_buf(&sg_in[0], src1, src1_len);
+	sg_set_buf(&sg_in[1], src2, src2_len);
+	sg_set_buf(&sg_in[2], pad, zero_padding);
+	sg_init_table(sg_out, 1);
+	sg_set_buf(sg_out, dst, *dst_len);
+	iv = crypto_blkcipher_crt(tfm)->iv;
+	ivsize = crypto_blkcipher_ivsize(tfm);
+
+	memcpy(iv, aes_iv, ivsize);
+	/*
+	print_hex_dump(KERN_ERR, "enc  key: ", DUMP_PREFIX_NONE, 16, 1,
+		       key, key_len, 1);
+	print_hex_dump(KERN_ERR, "enc src1: ", DUMP_PREFIX_NONE, 16, 1,
+			src1, src1_len, 1);
+	print_hex_dump(KERN_ERR, "enc src2: ", DUMP_PREFIX_NONE, 16, 1,
+			src2, src2_len, 1);
+	print_hex_dump(KERN_ERR, "enc  pad: ", DUMP_PREFIX_NONE, 16, 1,
+			pad, zero_padding, 1);
+	*/
+	ret = crypto_blkcipher_encrypt(&desc, sg_out, sg_in,
+				     src1_len + src2_len + zero_padding);
+	crypto_free_blkcipher(tfm);
+	if (ret < 0)
+		pr_err("ceph_aes_crypt2 failed %d\n", ret);
+	/*
+	print_hex_dump(KERN_ERR, "enc  out: ", DUMP_PREFIX_NONE, 16, 1,
+		       dst, *dst_len, 1);
+	*/
+	return 0;
+}
+
+int ceph_aes_decrypt(const void *key, int key_len, void *dst, size_t *dst_len,
+		     const void *src, size_t src_len)
+{
+	struct scatterlist sg_in[1], sg_out[2];
+	struct crypto_blkcipher *tfm = ceph_crypto_alloc_cipher();
+	struct blkcipher_desc desc = { .tfm = tfm };
+	char pad[16];
+	void *iv;
+	int ivsize;
+	int ret;
+	int last_byte;
+
+	if (IS_ERR(tfm))
+		return PTR_ERR(tfm);
+
+	crypto_blkcipher_setkey((void *)tfm, key, key_len);
+	sg_init_table(sg_in, 1);
+	sg_init_table(sg_out, 2);
+	sg_set_buf(sg_in, src, src_len);
+	sg_set_buf(&sg_out[0], dst, *dst_len);
+	sg_set_buf(&sg_out[1], pad, sizeof(pad));
+
+	iv = crypto_blkcipher_crt(tfm)->iv;
+	ivsize = crypto_blkcipher_ivsize(tfm);
+
+	memcpy(iv, aes_iv, ivsize);
+
+	/*
+	print_hex_dump(KERN_ERR, "dec key: ", DUMP_PREFIX_NONE, 16, 1,
+		       key, key_len, 1);
+	print_hex_dump(KERN_ERR, "dec  in: ", DUMP_PREFIX_NONE, 16, 1,
+		       src, src_len, 1);
+	*/
+
+	ret = crypto_blkcipher_decrypt(&desc, sg_out, sg_in, src_len);
+	crypto_free_blkcipher(tfm);
+	if (ret < 0) {
+		pr_err("ceph_aes_decrypt failed %d\n", ret);
+		return ret;
+	}
+
+	if (src_len <= *dst_len)
+		last_byte = ((char *)dst)[src_len - 1];
+	else
+		last_byte = pad[src_len - *dst_len - 1];
+	if (last_byte <= 16 && src_len >= last_byte) {
+		*dst_len = src_len - last_byte;
+	} else {
+		pr_err("ceph_aes_decrypt got bad padding %d on src len %d\n",
+		       last_byte, (int)src_len);
+		return -EPERM;  /* bad padding */
+	}
+	/*
+	print_hex_dump(KERN_ERR, "dec out: ", DUMP_PREFIX_NONE, 16, 1,
+		       dst, *dst_len, 1);
+	*/
+	return 0;
+}
+
+int ceph_aes_decrypt2(const void *key, int key_len,
+		      void *dst1, size_t *dst1_len,
+		      void *dst2, size_t *dst2_len,
+		      const void *src, size_t src_len)
+{
+	struct scatterlist sg_in[1], sg_out[3];
+	struct crypto_blkcipher *tfm = ceph_crypto_alloc_cipher();
+	struct blkcipher_desc desc = { .tfm = tfm };
+	char pad[16];
+	void *iv;
+	int ivsize;
+	int ret;
+	int last_byte;
+
+	if (IS_ERR(tfm))
+		return PTR_ERR(tfm);
+
+	sg_init_table(sg_in, 1);
+	sg_set_buf(sg_in, src, src_len);
+	sg_init_table(sg_out, 3);
+	sg_set_buf(&sg_out[0], dst1, *dst1_len);
+	sg_set_buf(&sg_out[1], dst2, *dst2_len);
+	sg_set_buf(&sg_out[2], pad, sizeof(pad));
+
+	crypto_blkcipher_setkey((void *)tfm, key, key_len);
+	iv = crypto_blkcipher_crt(tfm)->iv;
+	ivsize = crypto_blkcipher_ivsize(tfm);
+
+	memcpy(iv, aes_iv, ivsize);
+
+	/*
+	print_hex_dump(KERN_ERR, "dec  key: ", DUMP_PREFIX_NONE, 16, 1,
+		       key, key_len, 1);
+	print_hex_dump(KERN_ERR, "dec   in: ", DUMP_PREFIX_NONE, 16, 1,
+		       src, src_len, 1);
+	*/
+
+	ret = crypto_blkcipher_decrypt(&desc, sg_out, sg_in, src_len);
+	crypto_free_blkcipher(tfm);
+	if (ret < 0) {
+		pr_err("ceph_aes_decrypt failed %d\n", ret);
+		return ret;
+	}
+
+	if (src_len <= *dst1_len)
+		last_byte = ((char *)dst1)[src_len - 1];
+	else if (src_len <= *dst1_len + *dst2_len)
+		last_byte = ((char *)dst2)[src_len - *dst1_len - 1];
+	else
+		last_byte = pad[src_len - *dst1_len - *dst2_len - 1];
+	if (last_byte <= 16 && src_len >= last_byte) {
+		src_len -= last_byte;
+	} else {
+		pr_err("ceph_aes_decrypt got bad padding %d on src len %d\n",
+		       last_byte, (int)src_len);
+		return -EPERM;  /* bad padding */
+	}
+
+	if (src_len < *dst1_len) {
+		*dst1_len = src_len;
+		*dst2_len = 0;
+	} else {
+		*dst2_len = src_len - *dst1_len;
+	}
+	/*
+	print_hex_dump(KERN_ERR, "dec  out1: ", DUMP_PREFIX_NONE, 16, 1,
+		       dst1, *dst1_len, 1);
+	print_hex_dump(KERN_ERR, "dec  out2: ", DUMP_PREFIX_NONE, 16, 1,
+		       dst2, *dst2_len, 1);
+	*/
+
+	return 0;
+}
+
+
+int ceph_decrypt(struct ceph_crypto_key *secret, void *dst, size_t *dst_len,
+		 const void *src, size_t src_len)
+{
+	switch (secret->type) {
+	case CEPH_CRYPTO_NONE:
+		if (*dst_len < src_len)
+			return -ERANGE;
+		memcpy(dst, src, src_len);
+		*dst_len = src_len;
+		return 0;
+
+	case CEPH_CRYPTO_AES:
+		return ceph_aes_decrypt(secret->key, secret->len, dst,
+					dst_len, src, src_len);
+
+	default:
+		return -EINVAL;
+	}
+}
+
+int ceph_decrypt2(struct ceph_crypto_key *secret,
+			void *dst1, size_t *dst1_len,
+			void *dst2, size_t *dst2_len,
+			const void *src, size_t src_len)
+{
+	size_t t;
+
+	switch (secret->type) {
+	case CEPH_CRYPTO_NONE:
+		if (*dst1_len + *dst2_len < src_len)
+			return -ERANGE;
+		t = min(*dst1_len, src_len);
+		memcpy(dst1, src, t);
+		*dst1_len = t;
+		src += t;
+		src_len -= t;
+		if (src_len) {
+			t = min(*dst2_len, src_len);
+			memcpy(dst2, src, t);
+			*dst2_len = t;
+		}
+		return 0;
+
+	case CEPH_CRYPTO_AES:
+		return ceph_aes_decrypt2(secret->key, secret->len,
+					 dst1, dst1_len, dst2, dst2_len,
+					 src, src_len);
+
+	default:
+		return -EINVAL;
+	}
+}
+
+int ceph_encrypt(struct ceph_crypto_key *secret, void *dst, size_t *dst_len,
+		 const void *src, size_t src_len)
+{
+	switch (secret->type) {
+	case CEPH_CRYPTO_NONE:
+		if (*dst_len < src_len)
+			return -ERANGE;
+		memcpy(dst, src, src_len);
+		*dst_len = src_len;
+		return 0;
+
+	case CEPH_CRYPTO_AES:
+		return ceph_aes_encrypt(secret->key, secret->len, dst,
+					dst_len, src, src_len);
+
+	default:
+		return -EINVAL;
+	}
+}
+
+int ceph_encrypt2(struct ceph_crypto_key *secret, void *dst, size_t *dst_len,
+		  const void *src1, size_t src1_len,
+		  const void *src2, size_t src2_len)
+{
+	switch (secret->type) {
+	case CEPH_CRYPTO_NONE:
+		if (*dst_len < src1_len + src2_len)
+			return -ERANGE;
+		memcpy(dst, src1, src1_len);
+		memcpy(dst + src1_len, src2, src2_len);
+		*dst_len = src1_len + src2_len;
+		return 0;
+
+	case CEPH_CRYPTO_AES:
+		return ceph_aes_encrypt2(secret->key, secret->len, dst, dst_len,
+					 src1, src1_len, src2, src2_len);
+
+	default:
+		return -EINVAL;
+	}
+}
diff --git a/fs/ceph/crypto.h b/fs/ceph/crypto.h
new file mode 100644
index 000000000000..40b502e6bd89
--- /dev/null
+++ b/fs/ceph/crypto.h
@@ -0,0 +1,48 @@
+#ifndef _FS_CEPH_CRYPTO_H
+#define _FS_CEPH_CRYPTO_H
+
+#include "types.h"
+#include "buffer.h"
+
+/*
+ * cryptographic secret
+ */
+struct ceph_crypto_key {
+	int type;
+	struct ceph_timespec created;
+	int len;
+	void *key;
+};
+
+static inline void ceph_crypto_key_destroy(struct ceph_crypto_key *key)
+{
+	kfree(key->key);
+}
+
+extern int ceph_crypto_key_encode(struct ceph_crypto_key *key,
+				  void **p, void *end);
+extern int ceph_crypto_key_decode(struct ceph_crypto_key *key,
+				  void **p, void *end);
+extern int ceph_crypto_key_unarmor(struct ceph_crypto_key *key, const char *in);
+
+/* crypto.c */
+extern int ceph_decrypt(struct ceph_crypto_key *secret,
+			void *dst, size_t *dst_len,
+			const void *src, size_t src_len);
+extern int ceph_encrypt(struct ceph_crypto_key *secret,
+			void *dst, size_t *dst_len,
+			const void *src, size_t src_len);
+extern int ceph_decrypt2(struct ceph_crypto_key *secret,
+			void *dst1, size_t *dst1_len,
+			void *dst2, size_t *dst2_len,
+			const void *src, size_t src_len);
+extern int ceph_encrypt2(struct ceph_crypto_key *secret,
+			 void *dst, size_t *dst_len,
+			 const void *src1, size_t src1_len,
+			 const void *src2, size_t src2_len);
+
+/* armor.c */
+extern int ceph_armor(char *dst, const void *src, const void *end);
+extern int ceph_unarmor(void *dst, const char *src, const char *end);
+
+#endif
diff --git a/fs/ceph/debugfs.c b/fs/ceph/debugfs.c
new file mode 100644
index 000000000000..e159f1415110
--- /dev/null
+++ b/fs/ceph/debugfs.c
@@ -0,0 +1,483 @@
+#include "ceph_debug.h"
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/ctype.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+#include "super.h"
+#include "mds_client.h"
+#include "mon_client.h"
+#include "auth.h"
+
+#ifdef CONFIG_DEBUG_FS
+
+/*
+ * Implement /sys/kernel/debug/ceph fun
+ *
+ * /sys/kernel/debug/ceph/client*  - an instance of the ceph client
+ *      .../osdmap      - current osdmap
+ *      .../mdsmap      - current mdsmap
+ *      .../monmap      - current monmap
+ *      .../osdc        - active osd requests
+ *      .../mdsc        - active mds requests
+ *      .../monc        - mon client state
+ *      .../dentry_lru  - dump contents of dentry lru
+ *      .../caps        - expose cap (reservation) stats
+ *      .../bdi         - symlink to ../../bdi/something
+ */
+
+static struct dentry *ceph_debugfs_dir;
+
+static int monmap_show(struct seq_file *s, void *p)
+{
+	int i;
+	struct ceph_client *client = s->private;
+
+	if (client->monc.monmap == NULL)
+		return 0;
+
+	seq_printf(s, "epoch %d\n", client->monc.monmap->epoch);
+	for (i = 0; i < client->monc.monmap->num_mon; i++) {
+		struct ceph_entity_inst *inst =
+			&client->monc.monmap->mon_inst[i];
+
+		seq_printf(s, "\t%s%lld\t%s\n",
+			   ENTITY_NAME(inst->name),
+			   pr_addr(&inst->addr.in_addr));
+	}
+	return 0;
+}
+
+static int mdsmap_show(struct seq_file *s, void *p)
+{
+	int i;
+	struct ceph_client *client = s->private;
+
+	if (client->mdsc.mdsmap == NULL)
+		return 0;
+	seq_printf(s, "epoch %d\n", client->mdsc.mdsmap->m_epoch);
+	seq_printf(s, "root %d\n", client->mdsc.mdsmap->m_root);
+	seq_printf(s, "session_timeout %d\n",
+		       client->mdsc.mdsmap->m_session_timeout);
+	seq_printf(s, "session_autoclose %d\n",
+		       client->mdsc.mdsmap->m_session_autoclose);
+	for (i = 0; i < client->mdsc.mdsmap->m_max_mds; i++) {
+		struct ceph_entity_addr *addr =
+			&client->mdsc.mdsmap->m_info[i].addr;
+		int state = client->mdsc.mdsmap->m_info[i].state;
+
+		seq_printf(s, "\tmds%d\t%s\t(%s)\n", i, pr_addr(&addr->in_addr),
+			       ceph_mds_state_name(state));
+	}
+	return 0;
+}
+
+static int osdmap_show(struct seq_file *s, void *p)
+{
+	int i;
+	struct ceph_client *client = s->private;
+	struct rb_node *n;
+
+	if (client->osdc.osdmap == NULL)
+		return 0;
+	seq_printf(s, "epoch %d\n", client->osdc.osdmap->epoch);
+	seq_printf(s, "flags%s%s\n",
+		   (client->osdc.osdmap->flags & CEPH_OSDMAP_NEARFULL) ?
+		   " NEARFULL" : "",
+		   (client->osdc.osdmap->flags & CEPH_OSDMAP_FULL) ?
+		   " FULL" : "");
+	for (n = rb_first(&client->osdc.osdmap->pg_pools); n; n = rb_next(n)) {
+		struct ceph_pg_pool_info *pool =
+			rb_entry(n, struct ceph_pg_pool_info, node);
+		seq_printf(s, "pg_pool %d pg_num %d / %d, lpg_num %d / %d\n",
+			   pool->id, pool->v.pg_num, pool->pg_num_mask,
+			   pool->v.lpg_num, pool->lpg_num_mask);
+	}
+	for (i = 0; i < client->osdc.osdmap->max_osd; i++) {
+		struct ceph_entity_addr *addr =
+			&client->osdc.osdmap->osd_addr[i];
+		int state = client->osdc.osdmap->osd_state[i];
+		char sb[64];
+
+		seq_printf(s, "\tosd%d\t%s\t%3d%%\t(%s)\n",
+			   i, pr_addr(&addr->in_addr),
+			   ((client->osdc.osdmap->osd_weight[i]*100) >> 16),
+			   ceph_osdmap_state_str(sb, sizeof(sb), state));
+	}
+	return 0;
+}
+
+static int monc_show(struct seq_file *s, void *p)
+{
+	struct ceph_client *client = s->private;
+	struct ceph_mon_statfs_request *req;
+	struct ceph_mon_client *monc = &client->monc;
+	struct rb_node *rp;
+
+	mutex_lock(&monc->mutex);
+
+	if (monc->have_mdsmap)
+		seq_printf(s, "have mdsmap %u\n", (unsigned)monc->have_mdsmap);
+	if (monc->have_osdmap)
+		seq_printf(s, "have osdmap %u\n", (unsigned)monc->have_osdmap);
+	if (monc->want_next_osdmap)
+		seq_printf(s, "want next osdmap\n");
+
+	for (rp = rb_first(&monc->statfs_request_tree); rp; rp = rb_next(rp)) {
+		req = rb_entry(rp, struct ceph_mon_statfs_request, node);
+		seq_printf(s, "%lld statfs\n", req->tid);
+	}
+
+	mutex_unlock(&monc->mutex);
+	return 0;
+}
+
+static int mdsc_show(struct seq_file *s, void *p)
+{
+	struct ceph_client *client = s->private;
+	struct ceph_mds_client *mdsc = &client->mdsc;
+	struct ceph_mds_request *req;
+	struct rb_node *rp;
+	int pathlen;
+	u64 pathbase;
+	char *path;
+
+	mutex_lock(&mdsc->mutex);
+	for (rp = rb_first(&mdsc->request_tree); rp; rp = rb_next(rp)) {
+		req = rb_entry(rp, struct ceph_mds_request, r_node);
+
+		if (req->r_request)
+			seq_printf(s, "%lld\tmds%d\t", req->r_tid, req->r_mds);
+		else
+			seq_printf(s, "%lld\t(no request)\t", req->r_tid);
+
+		seq_printf(s, "%s", ceph_mds_op_name(req->r_op));
+
+		if (req->r_got_unsafe)
+			seq_printf(s, "\t(unsafe)");
+		else
+			seq_printf(s, "\t");
+
+		if (req->r_inode) {
+			seq_printf(s, " #%llx", ceph_ino(req->r_inode));
+		} else if (req->r_dentry) {
+			path = ceph_mdsc_build_path(req->r_dentry, &pathlen,
+						    &pathbase, 0);
+			spin_lock(&req->r_dentry->d_lock);
+			seq_printf(s, " #%llx/%.*s (%s)",
+				   ceph_ino(req->r_dentry->d_parent->d_inode),
+				   req->r_dentry->d_name.len,
+				   req->r_dentry->d_name.name,
+				   path ? path : "");
+			spin_unlock(&req->r_dentry->d_lock);
+			kfree(path);
+		} else if (req->r_path1) {
+			seq_printf(s, " #%llx/%s", req->r_ino1.ino,
+				   req->r_path1);
+		}
+
+		if (req->r_old_dentry) {
+			path = ceph_mdsc_build_path(req->r_old_dentry, &pathlen,
+						    &pathbase, 0);
+			spin_lock(&req->r_old_dentry->d_lock);
+			seq_printf(s, " #%llx/%.*s (%s)",
+			   ceph_ino(req->r_old_dentry->d_parent->d_inode),
+				   req->r_old_dentry->d_name.len,
+				   req->r_old_dentry->d_name.name,
+				   path ? path : "");
+			spin_unlock(&req->r_old_dentry->d_lock);
+			kfree(path);
+		} else if (req->r_path2) {
+			if (req->r_ino2.ino)
+				seq_printf(s, " #%llx/%s", req->r_ino2.ino,
+					   req->r_path2);
+			else
+				seq_printf(s, " %s", req->r_path2);
+		}
+
+		seq_printf(s, "\n");
+	}
+	mutex_unlock(&mdsc->mutex);
+
+	return 0;
+}
+
+static int osdc_show(struct seq_file *s, void *pp)
+{
+	struct ceph_client *client = s->private;
+	struct ceph_osd_client *osdc = &client->osdc;
+	struct rb_node *p;
+
+	mutex_lock(&osdc->request_mutex);
+	for (p = rb_first(&osdc->requests); p; p = rb_next(p)) {
+		struct ceph_osd_request *req;
+		struct ceph_osd_request_head *head;
+		struct ceph_osd_op *op;
+		int num_ops;
+		int opcode, olen;
+		int i;
+
+		req = rb_entry(p, struct ceph_osd_request, r_node);
+
+		seq_printf(s, "%lld\tosd%d\t%d.%x\t", req->r_tid,
+			   req->r_osd ? req->r_osd->o_osd : -1,
+			   le32_to_cpu(req->r_pgid.pool),
+			   le16_to_cpu(req->r_pgid.ps));
+
+		head = req->r_request->front.iov_base;
+		op = (void *)(head + 1);
+
+		num_ops = le16_to_cpu(head->num_ops);
+		olen = le32_to_cpu(head->object_len);
+		seq_printf(s, "%.*s", olen,
+			   (const char *)(head->ops + num_ops));
+
+		if (req->r_reassert_version.epoch)
+			seq_printf(s, "\t%u'%llu",
+			   (unsigned)le32_to_cpu(req->r_reassert_version.epoch),
+			   le64_to_cpu(req->r_reassert_version.version));
+		else
+			seq_printf(s, "\t");
+
+		for (i = 0; i < num_ops; i++) {
+			opcode = le16_to_cpu(op->op);
+			seq_printf(s, "\t%s", ceph_osd_op_name(opcode));
+			op++;
+		}
+
+		seq_printf(s, "\n");
+	}
+	mutex_unlock(&osdc->request_mutex);
+	return 0;
+}
+
+static int caps_show(struct seq_file *s, void *p)
+{
+	struct ceph_client *client = p;
+	int total, avail, used, reserved, min;
+
+	ceph_reservation_status(client, &total, &avail, &used, &reserved, &min);
+	seq_printf(s, "total\t\t%d\n"
+		   "avail\t\t%d\n"
+		   "used\t\t%d\n"
+		   "reserved\t%d\n"
+		   "min\t%d\n",
+		   total, avail, used, reserved, min);
+	return 0;
+}
+
+static int dentry_lru_show(struct seq_file *s, void *ptr)
+{
+	struct ceph_client *client = s->private;
+	struct ceph_mds_client *mdsc = &client->mdsc;
+	struct ceph_dentry_info *di;
+
+	spin_lock(&mdsc->dentry_lru_lock);
+	list_for_each_entry(di, &mdsc->dentry_lru, lru) {
+		struct dentry *dentry = di->dentry;
+		seq_printf(s, "%p %p\t%.*s\n",
+			   di, dentry, dentry->d_name.len, dentry->d_name.name);
+	}
+	spin_unlock(&mdsc->dentry_lru_lock);
+
+	return 0;
+}
+
+#define DEFINE_SHOW_FUNC(name) 						\
+static int name##_open(struct inode *inode, struct file *file)		\
+{									\
+	struct seq_file *sf;						\
+	int ret;							\
+									\
+	ret = single_open(file, name, NULL);				\
+	sf = file->private_data;					\
+	sf->private = inode->i_private;					\
+	return ret;							\
+}									\
+									\
+static const struct file_operations name##_fops = {			\
+	.open		= name##_open,					\
+	.read		= seq_read,					\
+	.llseek		= seq_lseek,					\
+	.release	= single_release,				\
+};
+
+DEFINE_SHOW_FUNC(monmap_show)
+DEFINE_SHOW_FUNC(mdsmap_show)
+DEFINE_SHOW_FUNC(osdmap_show)
+DEFINE_SHOW_FUNC(monc_show)
+DEFINE_SHOW_FUNC(mdsc_show)
+DEFINE_SHOW_FUNC(osdc_show)
+DEFINE_SHOW_FUNC(dentry_lru_show)
+DEFINE_SHOW_FUNC(caps_show)
+
+static int congestion_kb_set(void *data, u64 val)
+{
+	struct ceph_client *client = (struct ceph_client *)data;
+
+	if (client)
+		client->mount_args->congestion_kb = (int)val;
+
+	return 0;
+}
+
+static int congestion_kb_get(void *data, u64 *val)
+{
+	struct ceph_client *client = (struct ceph_client *)data;
+
+	if (client)
+		*val = (u64)client->mount_args->congestion_kb;
+
+	return 0;
+}
+
+
+DEFINE_SIMPLE_ATTRIBUTE(congestion_kb_fops, congestion_kb_get,
+			congestion_kb_set, "%llu\n");
+
+int __init ceph_debugfs_init(void)
+{
+	ceph_debugfs_dir = debugfs_create_dir("ceph", NULL);
+	if (!ceph_debugfs_dir)
+		return -ENOMEM;
+	return 0;
+}
+
+void ceph_debugfs_cleanup(void)
+{
+	debugfs_remove(ceph_debugfs_dir);
+}
+
+int ceph_debugfs_client_init(struct ceph_client *client)
+{
+	int ret = 0;
+	char name[80];
+
+	snprintf(name, sizeof(name), FSID_FORMAT ".client%lld",
+		 PR_FSID(&client->fsid), client->monc.auth->global_id);
+
+	client->debugfs_dir = debugfs_create_dir(name, ceph_debugfs_dir);
+	if (!client->debugfs_dir)
+		goto out;
+
+	client->monc.debugfs_file = debugfs_create_file("monc",
+						      0600,
+						      client->debugfs_dir,
+						      client,
+						      &monc_show_fops);
+	if (!client->monc.debugfs_file)
+		goto out;
+
+	client->mdsc.debugfs_file = debugfs_create_file("mdsc",
+						      0600,
+						      client->debugfs_dir,
+						      client,
+						      &mdsc_show_fops);
+	if (!client->mdsc.debugfs_file)
+		goto out;
+
+	client->osdc.debugfs_file = debugfs_create_file("osdc",
+						      0600,
+						      client->debugfs_dir,
+						      client,
+						      &osdc_show_fops);
+	if (!client->osdc.debugfs_file)
+		goto out;
+
+	client->debugfs_monmap = debugfs_create_file("monmap",
+					0600,
+					client->debugfs_dir,
+					client,
+					&monmap_show_fops);
+	if (!client->debugfs_monmap)
+		goto out;
+
+	client->debugfs_mdsmap = debugfs_create_file("mdsmap",
+					0600,
+					client->debugfs_dir,
+					client,
+					&mdsmap_show_fops);
+	if (!client->debugfs_mdsmap)
+		goto out;
+
+	client->debugfs_osdmap = debugfs_create_file("osdmap",
+					0600,
+					client->debugfs_dir,
+					client,
+					&osdmap_show_fops);
+	if (!client->debugfs_osdmap)
+		goto out;
+
+	client->debugfs_dentry_lru = debugfs_create_file("dentry_lru",
+					0600,
+					client->debugfs_dir,
+					client,
+					&dentry_lru_show_fops);
+	if (!client->debugfs_dentry_lru)
+		goto out;
+
+	client->debugfs_caps = debugfs_create_file("caps",
+						   0400,
+						   client->debugfs_dir,
+						   client,
+						   &caps_show_fops);
+	if (!client->debugfs_caps)
+		goto out;
+
+	client->debugfs_congestion_kb = debugfs_create_file("writeback_congestion_kb",
+						   0600,
+						   client->debugfs_dir,
+						   client,
+						   &congestion_kb_fops);
+	if (!client->debugfs_congestion_kb)
+		goto out;
+
+	sprintf(name, "../../bdi/%s", dev_name(client->sb->s_bdi->dev));
+	client->debugfs_bdi = debugfs_create_symlink("bdi", client->debugfs_dir,
+						     name);
+
+	return 0;
+
+out:
+	ceph_debugfs_client_cleanup(client);
+	return ret;
+}
+
+void ceph_debugfs_client_cleanup(struct ceph_client *client)
+{
+	debugfs_remove(client->debugfs_bdi);
+	debugfs_remove(client->debugfs_caps);
+	debugfs_remove(client->debugfs_dentry_lru);
+	debugfs_remove(client->debugfs_osdmap);
+	debugfs_remove(client->debugfs_mdsmap);
+	debugfs_remove(client->debugfs_monmap);
+	debugfs_remove(client->osdc.debugfs_file);
+	debugfs_remove(client->mdsc.debugfs_file);
+	debugfs_remove(client->monc.debugfs_file);
+	debugfs_remove(client->debugfs_congestion_kb);
+	debugfs_remove(client->debugfs_dir);
+}
+
+#else  // CONFIG_DEBUG_FS
+
+int __init ceph_debugfs_init(void)
+{
+	return 0;
+}
+
+void ceph_debugfs_cleanup(void)
+{
+}
+
+int ceph_debugfs_client_init(struct ceph_client *client)
+{
+	return 0;
+}
+
+void ceph_debugfs_client_cleanup(struct ceph_client *client)
+{
+}
+
+#endif  // CONFIG_DEBUG_FS
diff --git a/fs/ceph/decode.h b/fs/ceph/decode.h
new file mode 100644
index 000000000000..65b3e022eaf5
--- /dev/null
+++ b/fs/ceph/decode.h
@@ -0,0 +1,194 @@
+#ifndef __CEPH_DECODE_H
+#define __CEPH_DECODE_H
+
+#include <asm/unaligned.h>
+#include <linux/time.h>
+
+#include "types.h"
+
+/*
+ * in all cases,
+ *   void **p     pointer to position pointer
+ *   void *end    pointer to end of buffer (last byte + 1)
+ */
+
+static inline u64 ceph_decode_64(void **p)
+{
+	u64 v = get_unaligned_le64(*p);
+	*p += sizeof(u64);
+	return v;
+}
+static inline u32 ceph_decode_32(void **p)
+{
+	u32 v = get_unaligned_le32(*p);
+	*p += sizeof(u32);
+	return v;
+}
+static inline u16 ceph_decode_16(void **p)
+{
+	u16 v = get_unaligned_le16(*p);
+	*p += sizeof(u16);
+	return v;
+}
+static inline u8 ceph_decode_8(void **p)
+{
+	u8 v = *(u8 *)*p;
+	(*p)++;
+	return v;
+}
+static inline void ceph_decode_copy(void **p, void *pv, size_t n)
+{
+	memcpy(pv, *p, n);
+	*p += n;
+}
+
+/*
+ * bounds check input.
+ */
+#define ceph_decode_need(p, end, n, bad)		\
+	do {						\
+		if (unlikely(*(p) + (n) > (end))) 	\
+			goto bad;			\
+	} while (0)
+
+#define ceph_decode_64_safe(p, end, v, bad)			\
+	do {							\
+		ceph_decode_need(p, end, sizeof(u64), bad);	\
+		v = ceph_decode_64(p);				\
+	} while (0)
+#define ceph_decode_32_safe(p, end, v, bad)			\
+	do {							\
+		ceph_decode_need(p, end, sizeof(u32), bad);	\
+		v = ceph_decode_32(p);				\
+	} while (0)
+#define ceph_decode_16_safe(p, end, v, bad)			\
+	do {							\
+		ceph_decode_need(p, end, sizeof(u16), bad);	\
+		v = ceph_decode_16(p);				\
+	} while (0)
+#define ceph_decode_8_safe(p, end, v, bad)			\
+	do {							\
+		ceph_decode_need(p, end, sizeof(u8), bad);	\
+		v = ceph_decode_8(p);				\
+	} while (0)
+
+#define ceph_decode_copy_safe(p, end, pv, n, bad)		\
+	do {							\
+		ceph_decode_need(p, end, n, bad);		\
+		ceph_decode_copy(p, pv, n);			\
+	} while (0)
+
+/*
+ * struct ceph_timespec <-> struct timespec
+ */
+static inline void ceph_decode_timespec(struct timespec *ts,
+					const struct ceph_timespec *tv)
+{
+	ts->tv_sec = le32_to_cpu(tv->tv_sec);
+	ts->tv_nsec = le32_to_cpu(tv->tv_nsec);
+}
+static inline void ceph_encode_timespec(struct ceph_timespec *tv,
+					const struct timespec *ts)
+{
+	tv->tv_sec = cpu_to_le32(ts->tv_sec);
+	tv->tv_nsec = cpu_to_le32(ts->tv_nsec);
+}
+
+/*
+ * sockaddr_storage <-> ceph_sockaddr
+ */
+static inline void ceph_encode_addr(struct ceph_entity_addr *a)
+{
+	a->in_addr.ss_family = htons(a->in_addr.ss_family);
+}
+static inline void ceph_decode_addr(struct ceph_entity_addr *a)
+{
+	a->in_addr.ss_family = ntohs(a->in_addr.ss_family);
+	WARN_ON(a->in_addr.ss_family == 512);
+}
+
+/*
+ * encoders
+ */
+static inline void ceph_encode_64(void **p, u64 v)
+{
+	put_unaligned_le64(v, (__le64 *)*p);
+	*p += sizeof(u64);
+}
+static inline void ceph_encode_32(void **p, u32 v)
+{
+	put_unaligned_le32(v, (__le32 *)*p);
+	*p += sizeof(u32);
+}
+static inline void ceph_encode_16(void **p, u16 v)
+{
+	put_unaligned_le16(v, (__le16 *)*p);
+	*p += sizeof(u16);
+}
+static inline void ceph_encode_8(void **p, u8 v)
+{
+	*(u8 *)*p = v;
+	(*p)++;
+}
+static inline void ceph_encode_copy(void **p, const void *s, int len)
+{
+	memcpy(*p, s, len);
+	*p += len;
+}
+
+/*
+ * filepath, string encoders
+ */
+static inline void ceph_encode_filepath(void **p, void *end,
+					u64 ino, const char *path)
+{
+	u32 len = path ? strlen(path) : 0;
+	BUG_ON(*p + sizeof(ino) + sizeof(len) + len > end);
+	ceph_encode_8(p, 1);
+	ceph_encode_64(p, ino);
+	ceph_encode_32(p, len);
+	if (len)
+		memcpy(*p, path, len);
+	*p += len;
+}
+
+static inline void ceph_encode_string(void **p, void *end,
+				      const char *s, u32 len)
+{
+	BUG_ON(*p + sizeof(len) + len > end);
+	ceph_encode_32(p, len);
+	if (len)
+		memcpy(*p, s, len);
+	*p += len;
+}
+
+#define ceph_encode_need(p, end, n, bad)		\
+	do {						\
+		if (unlikely(*(p) + (n) > (end))) 	\
+			goto bad;			\
+	} while (0)
+
+#define ceph_encode_64_safe(p, end, v, bad)			\
+	do {							\
+		ceph_encode_need(p, end, sizeof(u64), bad);	\
+		ceph_encode_64(p, v);				\
+	} while (0)
+#define ceph_encode_32_safe(p, end, v, bad)			\
+	do {							\
+		ceph_encode_need(p, end, sizeof(u32), bad);	\
+		ceph_encode_32(p, v);			\
+	} while (0)
+#define ceph_encode_16_safe(p, end, v, bad)			\
+	do {							\
+		ceph_encode_need(p, end, sizeof(u16), bad);	\
+		ceph_encode_16(p, v);			\
+	} while (0)
+
+#define ceph_encode_copy_safe(p, end, pv, n, bad)		\
+	do {							\
+		ceph_encode_need(p, end, n, bad);		\
+		ceph_encode_copy(p, pv, n);			\
+	} while (0)
+
+
+#endif
diff --git a/fs/ceph/dir.c b/fs/ceph/dir.c
new file mode 100644
index 000000000000..5107384ee029
--- /dev/null
+++ b/fs/ceph/dir.c
@@ -0,0 +1,1220 @@
+#include "ceph_debug.h"
+
+#include <linux/spinlock.h>
+#include <linux/fs_struct.h>
+#include <linux/namei.h>
+#include <linux/sched.h>
+
+#include "super.h"
+
+/*
+ * Directory operations: readdir, lookup, create, link, unlink,
+ * rename, etc.
+ */
+
+/*
+ * Ceph MDS operations are specified in terms of a base ino and
+ * relative path.  Thus, the client can specify an operation on a
+ * specific inode (e.g., a getattr due to fstat(2)), or as a path
+ * relative to, say, the root directory.
+ *
+ * Normally, we limit ourselves to strict inode ops (no path component)
+ * or dentry operations (a single path component relative to an ino).  The
+ * exception to this is open_root_dentry(), which will open the mount
+ * point by name.
+ */
+
+const struct inode_operations ceph_dir_iops;
+const struct file_operations ceph_dir_fops;
+struct dentry_operations ceph_dentry_ops;
+
+/*
+ * Initialize ceph dentry state.
+ */
+int ceph_init_dentry(struct dentry *dentry)
+{
+	struct ceph_dentry_info *di;
+
+	if (dentry->d_fsdata)
+		return 0;
+
+	if (ceph_snap(dentry->d_parent->d_inode) == CEPH_NOSNAP)
+		dentry->d_op = &ceph_dentry_ops;
+	else if (ceph_snap(dentry->d_parent->d_inode) == CEPH_SNAPDIR)
+		dentry->d_op = &ceph_snapdir_dentry_ops;
+	else
+		dentry->d_op = &ceph_snap_dentry_ops;
+
+	di = kmem_cache_alloc(ceph_dentry_cachep, GFP_NOFS);
+	if (!di)
+		return -ENOMEM;          /* oh well */
+
+	spin_lock(&dentry->d_lock);
+	if (dentry->d_fsdata) /* lost a race */
+		goto out_unlock;
+	di->dentry = dentry;
+	di->lease_session = NULL;
+	dentry->d_fsdata = di;
+	dentry->d_time = jiffies;
+	ceph_dentry_lru_add(dentry);
+out_unlock:
+	spin_unlock(&dentry->d_lock);
+	return 0;
+}
+
+
+
+/*
+ * for readdir, we encode the directory frag and offset within that
+ * frag into f_pos.
+ */
+static unsigned fpos_frag(loff_t p)
+{
+	return p >> 32;
+}
+static unsigned fpos_off(loff_t p)
+{
+	return p & 0xffffffff;
+}
+
+/*
+ * When possible, we try to satisfy a readdir by peeking at the
+ * dcache.  We make this work by carefully ordering dentries on
+ * d_u.d_child when we initially get results back from the MDS, and
+ * falling back to a "normal" sync readdir if any dentries in the dir
+ * are dropped.
+ *
+ * I_COMPLETE tells indicates we have all dentries in the dir.  It is
+ * defined IFF we hold CEPH_CAP_FILE_SHARED (which will be revoked by
+ * the MDS if/when the directory is modified).
+ */
+static int __dcache_readdir(struct file *filp,
+			    void *dirent, filldir_t filldir)
+{
+	struct inode *inode = filp->f_dentry->d_inode;
+	struct ceph_file_info *fi = filp->private_data;
+	struct dentry *parent = filp->f_dentry;
+	struct inode *dir = parent->d_inode;
+	struct list_head *p;
+	struct dentry *dentry, *last;
+	struct ceph_dentry_info *di;
+	int err = 0;
+
+	/* claim ref on last dentry we returned */
+	last = fi->dentry;
+	fi->dentry = NULL;
+
+	dout("__dcache_readdir %p at %llu (last %p)\n", dir, filp->f_pos,
+	     last);
+
+	spin_lock(&dcache_lock);
+
+	/* start at beginning? */
+	if (filp->f_pos == 2 || (last &&
+				 filp->f_pos < ceph_dentry(last)->offset)) {
+		if (list_empty(&parent->d_subdirs))
+			goto out_unlock;
+		p = parent->d_subdirs.prev;
+		dout(" initial p %p/%p\n", p->prev, p->next);
+	} else {
+		p = last->d_u.d_child.prev;
+	}
+
+more:
+	dentry = list_entry(p, struct dentry, d_u.d_child);
+	di = ceph_dentry(dentry);
+	while (1) {
+		dout(" p %p/%p d_subdirs %p/%p\n", p->prev, p->next,
+		     parent->d_subdirs.prev, parent->d_subdirs.next);
+		if (p == &parent->d_subdirs) {
+			fi->at_end = 1;
+			goto out_unlock;
+		}
+		if (!d_unhashed(dentry) && dentry->d_inode &&
+		    ceph_snap(dentry->d_inode) != CEPH_SNAPDIR &&
+		    ceph_ino(dentry->d_inode) != CEPH_INO_CEPH &&
+		    filp->f_pos <= di->offset)
+			break;
+		dout(" skipping %p %.*s at %llu (%llu)%s%s\n", dentry,
+		     dentry->d_name.len, dentry->d_name.name, di->offset,
+		     filp->f_pos, d_unhashed(dentry) ? " unhashed" : "",
+		     !dentry->d_inode ? " null" : "");
+		p = p->prev;
+		dentry = list_entry(p, struct dentry, d_u.d_child);
+		di = ceph_dentry(dentry);
+	}
+
+	atomic_inc(&dentry->d_count);
+	spin_unlock(&dcache_lock);
+	spin_unlock(&inode->i_lock);
+
+	dout(" %llu (%llu) dentry %p %.*s %p\n", di->offset, filp->f_pos,
+	     dentry, dentry->d_name.len, dentry->d_name.name, dentry->d_inode);
+	filp->f_pos = di->offset;
+	err = filldir(dirent, dentry->d_name.name,
+		      dentry->d_name.len, di->offset,
+		      dentry->d_inode->i_ino,
+		      dentry->d_inode->i_mode >> 12);
+
+	if (last) {
+		if (err < 0) {
+			/* remember our position */
+			fi->dentry = last;
+			fi->next_offset = di->offset;
+		} else {
+			dput(last);
+		}
+		last = NULL;
+	}
+
+	spin_lock(&inode->i_lock);
+	spin_lock(&dcache_lock);
+
+	if (err < 0)
+		goto out_unlock;
+
+	last = dentry;
+
+	p = p->prev;
+	filp->f_pos++;
+
+	/* make sure a dentry wasn't dropped while we didn't have dcache_lock */
+	if ((ceph_inode(dir)->i_ceph_flags & CEPH_I_COMPLETE))
+		goto more;
+	dout(" lost I_COMPLETE on %p; falling back to mds\n", dir);
+	err = -EAGAIN;
+
+out_unlock:
+	spin_unlock(&dcache_lock);
+
+	if (last) {
+		spin_unlock(&inode->i_lock);
+		dput(last);
+		spin_lock(&inode->i_lock);
+	}
+
+	return err;
+}
+
+/*
+ * make note of the last dentry we read, so we can
+ * continue at the same lexicographical point,
+ * regardless of what dir changes take place on the
+ * server.
+ */
+static int note_last_dentry(struct ceph_file_info *fi, const char *name,
+			    int len)
+{
+	kfree(fi->last_name);
+	fi->last_name = kmalloc(len+1, GFP_NOFS);
+	if (!fi->last_name)
+		return -ENOMEM;
+	memcpy(fi->last_name, name, len);
+	fi->last_name[len] = 0;
+	dout("note_last_dentry '%s'\n", fi->last_name);
+	return 0;
+}
+
+static int ceph_readdir(struct file *filp, void *dirent, filldir_t filldir)
+{
+	struct ceph_file_info *fi = filp->private_data;
+	struct inode *inode = filp->f_dentry->d_inode;
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	struct ceph_client *client = ceph_inode_to_client(inode);
+	struct ceph_mds_client *mdsc = &client->mdsc;
+	unsigned frag = fpos_frag(filp->f_pos);
+	int off = fpos_off(filp->f_pos);
+	int err;
+	u32 ftype;
+	struct ceph_mds_reply_info_parsed *rinfo;
+	const int max_entries = client->mount_args->max_readdir;
+
+	dout("readdir %p filp %p frag %u off %u\n", inode, filp, frag, off);
+	if (fi->at_end)
+		return 0;
+
+	/* always start with . and .. */
+	if (filp->f_pos == 0) {
+		/* note dir version at start of readdir so we can tell
+		 * if any dentries get dropped */
+		fi->dir_release_count = ci->i_release_count;
+
+		dout("readdir off 0 -> '.'\n");
+		if (filldir(dirent, ".", 1, ceph_make_fpos(0, 0),
+			    inode->i_ino, inode->i_mode >> 12) < 0)
+			return 0;
+		filp->f_pos = 1;
+		off = 1;
+	}
+	if (filp->f_pos == 1) {
+		dout("readdir off 1 -> '..'\n");
+		if (filldir(dirent, "..", 2, ceph_make_fpos(0, 1),
+			    filp->f_dentry->d_parent->d_inode->i_ino,
+			    inode->i_mode >> 12) < 0)
+			return 0;
+		filp->f_pos = 2;
+		off = 2;
+	}
+
+	/* can we use the dcache? */
+	spin_lock(&inode->i_lock);
+	if ((filp->f_pos == 2 || fi->dentry) &&
+	    !ceph_test_opt(client, NOASYNCREADDIR) &&
+	    (ci->i_ceph_flags & CEPH_I_COMPLETE) &&
+	    __ceph_caps_issued_mask(ci, CEPH_CAP_FILE_SHARED, 1)) {
+		err = __dcache_readdir(filp, dirent, filldir);
+		if (err != -EAGAIN) {
+			spin_unlock(&inode->i_lock);
+			return err;
+		}
+	}
+	spin_unlock(&inode->i_lock);
+	if (fi->dentry) {
+		err = note_last_dentry(fi, fi->dentry->d_name.name,
+				       fi->dentry->d_name.len);
+		if (err)
+			return err;
+		dput(fi->dentry);
+		fi->dentry = NULL;
+	}
+
+	/* proceed with a normal readdir */
+
+more:
+	/* do we have the correct frag content buffered? */
+	if (fi->frag != frag || fi->last_readdir == NULL) {
+		struct ceph_mds_request *req;
+		int op = ceph_snap(inode) == CEPH_SNAPDIR ?
+			CEPH_MDS_OP_LSSNAP : CEPH_MDS_OP_READDIR;
+
+		/* discard old result, if any */
+		if (fi->last_readdir)
+			ceph_mdsc_put_request(fi->last_readdir);
+
+		/* requery frag tree, as the frag topology may have changed */
+		frag = ceph_choose_frag(ceph_inode(inode), frag, NULL, NULL);
+
+		dout("readdir fetching %llx.%llx frag %x offset '%s'\n",
+		     ceph_vinop(inode), frag, fi->last_name);
+		req = ceph_mdsc_create_request(mdsc, op, USE_AUTH_MDS);
+		if (IS_ERR(req))
+			return PTR_ERR(req);
+		req->r_inode = igrab(inode);
+		req->r_dentry = dget(filp->f_dentry);
+		/* hints to request -> mds selection code */
+		req->r_direct_mode = USE_AUTH_MDS;
+		req->r_direct_hash = ceph_frag_value(frag);
+		req->r_direct_is_hash = true;
+		req->r_path2 = kstrdup(fi->last_name, GFP_NOFS);
+		req->r_readdir_offset = fi->next_offset;
+		req->r_args.readdir.frag = cpu_to_le32(frag);
+		req->r_args.readdir.max_entries = cpu_to_le32(max_entries);
+		req->r_num_caps = max_entries;
+		err = ceph_mdsc_do_request(mdsc, NULL, req);
+		if (err < 0) {
+			ceph_mdsc_put_request(req);
+			return err;
+		}
+		dout("readdir got and parsed readdir result=%d"
+		     " on frag %x, end=%d, complete=%d\n", err, frag,
+		     (int)req->r_reply_info.dir_end,
+		     (int)req->r_reply_info.dir_complete);
+
+		if (!req->r_did_prepopulate) {
+			dout("readdir !did_prepopulate");
+			fi->dir_release_count--;    /* preclude I_COMPLETE */
+		}
+
+		/* note next offset and last dentry name */
+		fi->offset = fi->next_offset;
+		fi->last_readdir = req;
+
+		if (req->r_reply_info.dir_end) {
+			kfree(fi->last_name);
+			fi->last_name = NULL;
+			fi->next_offset = 0;
+		} else {
+			rinfo = &req->r_reply_info;
+			err = note_last_dentry(fi,
+				       rinfo->dir_dname[rinfo->dir_nr-1],
+				       rinfo->dir_dname_len[rinfo->dir_nr-1]);
+			if (err)
+				return err;
+			fi->next_offset += rinfo->dir_nr;
+		}
+	}
+
+	rinfo = &fi->last_readdir->r_reply_info;
+	dout("readdir frag %x num %d off %d chunkoff %d\n", frag,
+	     rinfo->dir_nr, off, fi->offset);
+	while (off - fi->offset >= 0 && off - fi->offset < rinfo->dir_nr) {
+		u64 pos = ceph_make_fpos(frag, off);
+		struct ceph_mds_reply_inode *in =
+			rinfo->dir_in[off - fi->offset].in;
+		dout("readdir off %d (%d/%d) -> %lld '%.*s' %p\n",
+		     off, off - fi->offset, rinfo->dir_nr, pos,
+		     rinfo->dir_dname_len[off - fi->offset],
+		     rinfo->dir_dname[off - fi->offset], in);
+		BUG_ON(!in);
+		ftype = le32_to_cpu(in->mode) >> 12;
+		if (filldir(dirent,
+			    rinfo->dir_dname[off - fi->offset],
+			    rinfo->dir_dname_len[off - fi->offset],
+			    pos,
+			    le64_to_cpu(in->ino),
+			    ftype) < 0) {
+			dout("filldir stopping us...\n");
+			return 0;
+		}
+		off++;
+		filp->f_pos = pos + 1;
+	}
+
+	if (fi->last_name) {
+		ceph_mdsc_put_request(fi->last_readdir);
+		fi->last_readdir = NULL;
+		goto more;
+	}
+
+	/* more frags? */
+	if (!ceph_frag_is_rightmost(frag)) {
+		frag = ceph_frag_next(frag);
+		off = 0;
+		filp->f_pos = ceph_make_fpos(frag, off);
+		dout("readdir next frag is %x\n", frag);
+		goto more;
+	}
+	fi->at_end = 1;
+
+	/*
+	 * if dir_release_count still matches the dir, no dentries
+	 * were released during the whole readdir, and we should have
+	 * the complete dir contents in our cache.
+	 */
+	spin_lock(&inode->i_lock);
+	if (ci->i_release_count == fi->dir_release_count) {
+		dout(" marking %p complete\n", inode);
+		ci->i_ceph_flags |= CEPH_I_COMPLETE;
+		ci->i_max_offset = filp->f_pos;
+	}
+	spin_unlock(&inode->i_lock);
+
+	dout("readdir %p filp %p done.\n", inode, filp);
+	return 0;
+}
+
+static void reset_readdir(struct ceph_file_info *fi)
+{
+	if (fi->last_readdir) {
+		ceph_mdsc_put_request(fi->last_readdir);
+		fi->last_readdir = NULL;
+	}
+	kfree(fi->last_name);
+	fi->next_offset = 2;  /* compensate for . and .. */
+	if (fi->dentry) {
+		dput(fi->dentry);
+		fi->dentry = NULL;
+	}
+	fi->at_end = 0;
+}
+
+static loff_t ceph_dir_llseek(struct file *file, loff_t offset, int origin)
+{
+	struct ceph_file_info *fi = file->private_data;
+	struct inode *inode = file->f_mapping->host;
+	loff_t old_offset = offset;
+	loff_t retval;
+
+	mutex_lock(&inode->i_mutex);
+	switch (origin) {
+	case SEEK_END:
+		offset += inode->i_size + 2;   /* FIXME */
+		break;
+	case SEEK_CUR:
+		offset += file->f_pos;
+	}
+	retval = -EINVAL;
+	if (offset >= 0 && offset <= inode->i_sb->s_maxbytes) {
+		if (offset != file->f_pos) {
+			file->f_pos = offset;
+			file->f_version = 0;
+			fi->at_end = 0;
+		}
+		retval = offset;
+
+		/*
+		 * discard buffered readdir content on seekdir(0), or
+		 * seek to new frag, or seek prior to current chunk.
+		 */
+		if (offset == 0 ||
+		    fpos_frag(offset) != fpos_frag(old_offset) ||
+		    fpos_off(offset) < fi->offset) {
+			dout("dir_llseek dropping %p content\n", file);
+			reset_readdir(fi);
+		}
+
+		/* bump dir_release_count if we did a forward seek */
+		if (offset > old_offset)
+			fi->dir_release_count--;
+	}
+	mutex_unlock(&inode->i_mutex);
+	return retval;
+}
+
+/*
+ * Process result of a lookup/open request.
+ *
+ * Mainly, make sure we return the final req->r_dentry (if it already
+ * existed) in place of the original VFS-provided dentry when they
+ * differ.
+ *
+ * Gracefully handle the case where the MDS replies with -ENOENT and
+ * no trace (which it may do, at its discretion, e.g., if it doesn't
+ * care to issue a lease on the negative dentry).
+ */
+struct dentry *ceph_finish_lookup(struct ceph_mds_request *req,
+				  struct dentry *dentry, int err)
+{
+	struct ceph_client *client = ceph_client(dentry->d_sb);
+	struct inode *parent = dentry->d_parent->d_inode;
+
+	/* .snap dir? */
+	if (err == -ENOENT &&
+	    ceph_vino(parent).ino != CEPH_INO_ROOT && /* no .snap in root dir */
+	    strcmp(dentry->d_name.name,
+		   client->mount_args->snapdir_name) == 0) {
+		struct inode *inode = ceph_get_snapdir(parent);
+		dout("ENOENT on snapdir %p '%.*s', linking to snapdir %p\n",
+		     dentry, dentry->d_name.len, dentry->d_name.name, inode);
+		d_add(dentry, inode);
+		err = 0;
+	}
+
+	if (err == -ENOENT) {
+		/* no trace? */
+		err = 0;
+		if (!req->r_reply_info.head->is_dentry) {
+			dout("ENOENT and no trace, dentry %p inode %p\n",
+			     dentry, dentry->d_inode);
+			if (dentry->d_inode) {
+				d_drop(dentry);
+				err = -ENOENT;
+			} else {
+				d_add(dentry, NULL);
+			}
+		}
+	}
+	if (err)
+		dentry = ERR_PTR(err);
+	else if (dentry != req->r_dentry)
+		dentry = dget(req->r_dentry);   /* we got spliced */
+	else
+		dentry = NULL;
+	return dentry;
+}
+
+static int is_root_ceph_dentry(struct inode *inode, struct dentry *dentry)
+{
+	return ceph_ino(inode) == CEPH_INO_ROOT &&
+		strncmp(dentry->d_name.name, ".ceph", 5) == 0;
+}
+
+/*
+ * Look up a single dir entry.  If there is a lookup intent, inform
+ * the MDS so that it gets our 'caps wanted' value in a single op.
+ */
+static struct dentry *ceph_lookup(struct inode *dir, struct dentry *dentry,
+				  struct nameidata *nd)
+{
+	struct ceph_client *client = ceph_sb_to_client(dir->i_sb);
+	struct ceph_mds_client *mdsc = &client->mdsc;
+	struct ceph_mds_request *req;
+	int op;
+	int err;
+
+	dout("lookup %p dentry %p '%.*s'\n",
+	     dir, dentry, dentry->d_name.len, dentry->d_name.name);
+
+	if (dentry->d_name.len > NAME_MAX)
+		return ERR_PTR(-ENAMETOOLONG);
+
+	err = ceph_init_dentry(dentry);
+	if (err < 0)
+		return ERR_PTR(err);
+
+	/* open (but not create!) intent? */
+	if (nd &&
+	    (nd->flags & LOOKUP_OPEN) &&
+	    (nd->flags & LOOKUP_CONTINUE) == 0 && /* only open last component */
+	    !(nd->intent.open.flags & O_CREAT)) {
+		int mode = nd->intent.open.create_mode & ~current->fs->umask;
+		return ceph_lookup_open(dir, dentry, nd, mode, 1);
+	}
+
+	/* can we conclude ENOENT locally? */
+	if (dentry->d_inode == NULL) {
+		struct ceph_inode_info *ci = ceph_inode(dir);
+		struct ceph_dentry_info *di = ceph_dentry(dentry);
+
+		spin_lock(&dir->i_lock);
+		dout(" dir %p flags are %d\n", dir, ci->i_ceph_flags);
+		if (strncmp(dentry->d_name.name,
+			    client->mount_args->snapdir_name,
+			    dentry->d_name.len) &&
+		    !is_root_ceph_dentry(dir, dentry) &&
+		    (ci->i_ceph_flags & CEPH_I_COMPLETE) &&
+		    (__ceph_caps_issued_mask(ci, CEPH_CAP_FILE_SHARED, 1))) {
+			di->offset = ci->i_max_offset++;
+			spin_unlock(&dir->i_lock);
+			dout(" dir %p complete, -ENOENT\n", dir);
+			d_add(dentry, NULL);
+			di->lease_shared_gen = ci->i_shared_gen;
+			return NULL;
+		}
+		spin_unlock(&dir->i_lock);
+	}
+
+	op = ceph_snap(dir) == CEPH_SNAPDIR ?
+		CEPH_MDS_OP_LOOKUPSNAP : CEPH_MDS_OP_LOOKUP;
+	req = ceph_mdsc_create_request(mdsc, op, USE_ANY_MDS);
+	if (IS_ERR(req))
+		return ERR_PTR(PTR_ERR(req));
+	req->r_dentry = dget(dentry);
+	req->r_num_caps = 2;
+	/* we only need inode linkage */
+	req->r_args.getattr.mask = cpu_to_le32(CEPH_STAT_CAP_INODE);
+	req->r_locked_dir = dir;
+	err = ceph_mdsc_do_request(mdsc, NULL, req);
+	dentry = ceph_finish_lookup(req, dentry, err);
+	ceph_mdsc_put_request(req);  /* will dput(dentry) */
+	dout("lookup result=%p\n", dentry);
+	return dentry;
+}
+
+/*
+ * If we do a create but get no trace back from the MDS, follow up with
+ * a lookup (the VFS expects us to link up the provided dentry).
+ */
+int ceph_handle_notrace_create(struct inode *dir, struct dentry *dentry)
+{
+	struct dentry *result = ceph_lookup(dir, dentry, NULL);
+
+	if (result && !IS_ERR(result)) {
+		/*
+		 * We created the item, then did a lookup, and found
+		 * it was already linked to another inode we already
+		 * had in our cache (and thus got spliced).  Link our
+		 * dentry to that inode, but don't hash it, just in
+		 * case the VFS wants to dereference it.
+		 */
+		BUG_ON(!result->d_inode);
+		d_instantiate(dentry, result->d_inode);
+		return 0;
+	}
+	return PTR_ERR(result);
+}
+
+static int ceph_mknod(struct inode *dir, struct dentry *dentry,
+		      int mode, dev_t rdev)
+{
+	struct ceph_client *client = ceph_sb_to_client(dir->i_sb);
+	struct ceph_mds_client *mdsc = &client->mdsc;
+	struct ceph_mds_request *req;
+	int err;
+
+	if (ceph_snap(dir) != CEPH_NOSNAP)
+		return -EROFS;
+
+	dout("mknod in dir %p dentry %p mode 0%o rdev %d\n",
+	     dir, dentry, mode, rdev);
+	req = ceph_mdsc_create_request(mdsc, CEPH_MDS_OP_MKNOD, USE_AUTH_MDS);
+	if (IS_ERR(req)) {
+		d_drop(dentry);
+		return PTR_ERR(req);
+	}
+	req->r_dentry = dget(dentry);
+	req->r_num_caps = 2;
+	req->r_locked_dir = dir;
+	req->r_args.mknod.mode = cpu_to_le32(mode);
+	req->r_args.mknod.rdev = cpu_to_le32(rdev);
+	req->r_dentry_drop = CEPH_CAP_FILE_SHARED;
+	req->r_dentry_unless = CEPH_CAP_FILE_EXCL;
+	err = ceph_mdsc_do_request(mdsc, dir, req);
+	if (!err && !req->r_reply_info.head->is_dentry)
+		err = ceph_handle_notrace_create(dir, dentry);
+	ceph_mdsc_put_request(req);
+	if (err)
+		d_drop(dentry);
+	return err;
+}
+
+static int ceph_create(struct inode *dir, struct dentry *dentry, int mode,
+		       struct nameidata *nd)
+{
+	dout("create in dir %p dentry %p name '%.*s'\n",
+	     dir, dentry, dentry->d_name.len, dentry->d_name.name);
+
+	if (ceph_snap(dir) != CEPH_NOSNAP)
+		return -EROFS;
+
+	if (nd) {
+		BUG_ON((nd->flags & LOOKUP_OPEN) == 0);
+		dentry = ceph_lookup_open(dir, dentry, nd, mode, 0);
+		/* hrm, what should i do here if we get aliased? */
+		if (IS_ERR(dentry))
+			return PTR_ERR(dentry);
+		return 0;
+	}
+
+	/* fall back to mknod */
+	return ceph_mknod(dir, dentry, (mode & ~S_IFMT) | S_IFREG, 0);
+}
+
+static int ceph_symlink(struct inode *dir, struct dentry *dentry,
+			    const char *dest)
+{
+	struct ceph_client *client = ceph_sb_to_client(dir->i_sb);
+	struct ceph_mds_client *mdsc = &client->mdsc;
+	struct ceph_mds_request *req;
+	int err;
+
+	if (ceph_snap(dir) != CEPH_NOSNAP)
+		return -EROFS;
+
+	dout("symlink in dir %p dentry %p to '%s'\n", dir, dentry, dest);
+	req = ceph_mdsc_create_request(mdsc, CEPH_MDS_OP_SYMLINK, USE_AUTH_MDS);
+	if (IS_ERR(req)) {
+		d_drop(dentry);
+		return PTR_ERR(req);
+	}
+	req->r_dentry = dget(dentry);
+	req->r_num_caps = 2;
+	req->r_path2 = kstrdup(dest, GFP_NOFS);
+	req->r_locked_dir = dir;
+	req->r_dentry_drop = CEPH_CAP_FILE_SHARED;
+	req->r_dentry_unless = CEPH_CAP_FILE_EXCL;
+	err = ceph_mdsc_do_request(mdsc, dir, req);
+	if (!err && !req->r_reply_info.head->is_dentry)
+		err = ceph_handle_notrace_create(dir, dentry);
+	ceph_mdsc_put_request(req);
+	if (err)
+		d_drop(dentry);
+	return err;
+}
+
+static int ceph_mkdir(struct inode *dir, struct dentry *dentry, int mode)
+{
+	struct ceph_client *client = ceph_sb_to_client(dir->i_sb);
+	struct ceph_mds_client *mdsc = &client->mdsc;
+	struct ceph_mds_request *req;
+	int err = -EROFS;
+	int op;
+
+	if (ceph_snap(dir) == CEPH_SNAPDIR) {
+		/* mkdir .snap/foo is a MKSNAP */
+		op = CEPH_MDS_OP_MKSNAP;
+		dout("mksnap dir %p snap '%.*s' dn %p\n", dir,
+		     dentry->d_name.len, dentry->d_name.name, dentry);
+	} else if (ceph_snap(dir) == CEPH_NOSNAP) {
+		dout("mkdir dir %p dn %p mode 0%o\n", dir, dentry, mode);
+		op = CEPH_MDS_OP_MKDIR;
+	} else {
+		goto out;
+	}
+	req = ceph_mdsc_create_request(mdsc, op, USE_AUTH_MDS);
+	if (IS_ERR(req)) {
+		err = PTR_ERR(req);
+		goto out;
+	}
+
+	req->r_dentry = dget(dentry);
+	req->r_num_caps = 2;
+	req->r_locked_dir = dir;
+	req->r_args.mkdir.mode = cpu_to_le32(mode);
+	req->r_dentry_drop = CEPH_CAP_FILE_SHARED;
+	req->r_dentry_unless = CEPH_CAP_FILE_EXCL;
+	err = ceph_mdsc_do_request(mdsc, dir, req);
+	if (!err && !req->r_reply_info.head->is_dentry)
+		err = ceph_handle_notrace_create(dir, dentry);
+	ceph_mdsc_put_request(req);
+out:
+	if (err < 0)
+		d_drop(dentry);
+	return err;
+}
+
+static int ceph_link(struct dentry *old_dentry, struct inode *dir,
+		     struct dentry *dentry)
+{
+	struct ceph_client *client = ceph_sb_to_client(dir->i_sb);
+	struct ceph_mds_client *mdsc = &client->mdsc;
+	struct ceph_mds_request *req;
+	int err;
+
+	if (ceph_snap(dir) != CEPH_NOSNAP)
+		return -EROFS;
+
+	dout("link in dir %p old_dentry %p dentry %p\n", dir,
+	     old_dentry, dentry);
+	req = ceph_mdsc_create_request(mdsc, CEPH_MDS_OP_LINK, USE_AUTH_MDS);
+	if (IS_ERR(req)) {
+		d_drop(dentry);
+		return PTR_ERR(req);
+	}
+	req->r_dentry = dget(dentry);
+	req->r_num_caps = 2;
+	req->r_old_dentry = dget(old_dentry); /* or inode? hrm. */
+	req->r_locked_dir = dir;
+	req->r_dentry_drop = CEPH_CAP_FILE_SHARED;
+	req->r_dentry_unless = CEPH_CAP_FILE_EXCL;
+	err = ceph_mdsc_do_request(mdsc, dir, req);
+	if (err)
+		d_drop(dentry);
+	else if (!req->r_reply_info.head->is_dentry)
+		d_instantiate(dentry, igrab(old_dentry->d_inode));
+	ceph_mdsc_put_request(req);
+	return err;
+}
+
+/*
+ * For a soon-to-be unlinked file, drop the AUTH_RDCACHE caps.  If it
+ * looks like the link count will hit 0, drop any other caps (other
+ * than PIN) we don't specifically want (due to the file still being
+ * open).
+ */
+static int drop_caps_for_unlink(struct inode *inode)
+{
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	int drop = CEPH_CAP_LINK_SHARED | CEPH_CAP_LINK_EXCL;
+
+	spin_lock(&inode->i_lock);
+	if (inode->i_nlink == 1) {
+		drop |= ~(__ceph_caps_wanted(ci) | CEPH_CAP_PIN);
+		ci->i_ceph_flags |= CEPH_I_NODELAY;
+	}
+	spin_unlock(&inode->i_lock);
+	return drop;
+}
+
+/*
+ * rmdir and unlink are differ only by the metadata op code
+ */
+static int ceph_unlink(struct inode *dir, struct dentry *dentry)
+{
+	struct ceph_client *client = ceph_sb_to_client(dir->i_sb);
+	struct ceph_mds_client *mdsc = &client->mdsc;
+	struct inode *inode = dentry->d_inode;
+	struct ceph_mds_request *req;
+	int err = -EROFS;
+	int op;
+
+	if (ceph_snap(dir) == CEPH_SNAPDIR) {
+		/* rmdir .snap/foo is RMSNAP */
+		dout("rmsnap dir %p '%.*s' dn %p\n", dir, dentry->d_name.len,
+		     dentry->d_name.name, dentry);
+		op = CEPH_MDS_OP_RMSNAP;
+	} else if (ceph_snap(dir) == CEPH_NOSNAP) {
+		dout("unlink/rmdir dir %p dn %p inode %p\n",
+		     dir, dentry, inode);
+		op = ((dentry->d_inode->i_mode & S_IFMT) == S_IFDIR) ?
+			CEPH_MDS_OP_RMDIR : CEPH_MDS_OP_UNLINK;
+	} else
+		goto out;
+	req = ceph_mdsc_create_request(mdsc, op, USE_AUTH_MDS);
+	if (IS_ERR(req)) {
+		err = PTR_ERR(req);
+		goto out;
+	}
+	req->r_dentry = dget(dentry);
+	req->r_num_caps = 2;
+	req->r_locked_dir = dir;
+	req->r_dentry_drop = CEPH_CAP_FILE_SHARED;
+	req->r_dentry_unless = CEPH_CAP_FILE_EXCL;
+	req->r_inode_drop = drop_caps_for_unlink(inode);
+	err = ceph_mdsc_do_request(mdsc, dir, req);
+	if (!err && !req->r_reply_info.head->is_dentry)
+		d_delete(dentry);
+	ceph_mdsc_put_request(req);
+out:
+	return err;
+}
+
+static int ceph_rename(struct inode *old_dir, struct dentry *old_dentry,
+		       struct inode *new_dir, struct dentry *new_dentry)
+{
+	struct ceph_client *client = ceph_sb_to_client(old_dir->i_sb);
+	struct ceph_mds_client *mdsc = &client->mdsc;
+	struct ceph_mds_request *req;
+	int err;
+
+	if (ceph_snap(old_dir) != ceph_snap(new_dir))
+		return -EXDEV;
+	if (ceph_snap(old_dir) != CEPH_NOSNAP ||
+	    ceph_snap(new_dir) != CEPH_NOSNAP)
+		return -EROFS;
+	dout("rename dir %p dentry %p to dir %p dentry %p\n",
+	     old_dir, old_dentry, new_dir, new_dentry);
+	req = ceph_mdsc_create_request(mdsc, CEPH_MDS_OP_RENAME, USE_AUTH_MDS);
+	if (IS_ERR(req))
+		return PTR_ERR(req);
+	req->r_dentry = dget(new_dentry);
+	req->r_num_caps = 2;
+	req->r_old_dentry = dget(old_dentry);
+	req->r_locked_dir = new_dir;
+	req->r_old_dentry_drop = CEPH_CAP_FILE_SHARED;
+	req->r_old_dentry_unless = CEPH_CAP_FILE_EXCL;
+	req->r_dentry_drop = CEPH_CAP_FILE_SHARED;
+	req->r_dentry_unless = CEPH_CAP_FILE_EXCL;
+	/* release LINK_RDCACHE on source inode (mds will lock it) */
+	req->r_old_inode_drop = CEPH_CAP_LINK_SHARED;
+	if (new_dentry->d_inode)
+		req->r_inode_drop = drop_caps_for_unlink(new_dentry->d_inode);
+	err = ceph_mdsc_do_request(mdsc, old_dir, req);
+	if (!err && !req->r_reply_info.head->is_dentry) {
+		/*
+		 * Normally d_move() is done by fill_trace (called by
+		 * do_request, above).  If there is no trace, we need
+		 * to do it here.
+		 */
+		d_move(old_dentry, new_dentry);
+	}
+	ceph_mdsc_put_request(req);
+	return err;
+}
+
+
+/*
+ * Check if dentry lease is valid.  If not, delete the lease.  Try to
+ * renew if the least is more than half up.
+ */
+static int dentry_lease_is_valid(struct dentry *dentry)
+{
+	struct ceph_dentry_info *di;
+	struct ceph_mds_session *s;
+	int valid = 0;
+	u32 gen;
+	unsigned long ttl;
+	struct ceph_mds_session *session = NULL;
+	struct inode *dir = NULL;
+	u32 seq = 0;
+
+	spin_lock(&dentry->d_lock);
+	di = ceph_dentry(dentry);
+	if (di && di->lease_session) {
+		s = di->lease_session;
+		spin_lock(&s->s_cap_lock);
+		gen = s->s_cap_gen;
+		ttl = s->s_cap_ttl;
+		spin_unlock(&s->s_cap_lock);
+
+		if (di->lease_gen == gen &&
+		    time_before(jiffies, dentry->d_time) &&
+		    time_before(jiffies, ttl)) {
+			valid = 1;
+			if (di->lease_renew_after &&
+			    time_after(jiffies, di->lease_renew_after)) {
+				/* we should renew */
+				dir = dentry->d_parent->d_inode;
+				session = ceph_get_mds_session(s);
+				seq = di->lease_seq;
+				di->lease_renew_after = 0;
+				di->lease_renew_from = jiffies;
+			}
+		}
+	}
+	spin_unlock(&dentry->d_lock);
+
+	if (session) {
+		ceph_mdsc_lease_send_msg(session, dir, dentry,
+					 CEPH_MDS_LEASE_RENEW, seq);
+		ceph_put_mds_session(session);
+	}
+	dout("dentry_lease_is_valid - dentry %p = %d\n", dentry, valid);
+	return valid;
+}
+
+/*
+ * Check if directory-wide content lease/cap is valid.
+ */
+static int dir_lease_is_valid(struct inode *dir, struct dentry *dentry)
+{
+	struct ceph_inode_info *ci = ceph_inode(dir);
+	struct ceph_dentry_info *di = ceph_dentry(dentry);
+	int valid = 0;
+
+	spin_lock(&dir->i_lock);
+	if (ci->i_shared_gen == di->lease_shared_gen)
+		valid = __ceph_caps_issued_mask(ci, CEPH_CAP_FILE_SHARED, 1);
+	spin_unlock(&dir->i_lock);
+	dout("dir_lease_is_valid dir %p v%u dentry %p v%u = %d\n",
+	     dir, (unsigned)ci->i_shared_gen, dentry,
+	     (unsigned)di->lease_shared_gen, valid);
+	return valid;
+}
+
+/*
+ * Check if cached dentry can be trusted.
+ */
+static int ceph_d_revalidate(struct dentry *dentry, struct nameidata *nd)
+{
+	struct inode *dir = dentry->d_parent->d_inode;
+
+	dout("d_revalidate %p '%.*s' inode %p\n", dentry,
+	     dentry->d_name.len, dentry->d_name.name, dentry->d_inode);
+
+	/* always trust cached snapped dentries, snapdir dentry */
+	if (ceph_snap(dir) != CEPH_NOSNAP) {
+		dout("d_revalidate %p '%.*s' inode %p is SNAPPED\n", dentry,
+		     dentry->d_name.len, dentry->d_name.name, dentry->d_inode);
+		goto out_touch;
+	}
+	if (dentry->d_inode && ceph_snap(dentry->d_inode) == CEPH_SNAPDIR)
+		goto out_touch;
+
+	if (dentry_lease_is_valid(dentry) ||
+	    dir_lease_is_valid(dir, dentry))
+		goto out_touch;
+
+	dout("d_revalidate %p invalid\n", dentry);
+	d_drop(dentry);
+	return 0;
+out_touch:
+	ceph_dentry_lru_touch(dentry);
+	return 1;
+}
+
+/*
+ * When a dentry is released, clear the dir I_COMPLETE if it was part
+ * of the current dir gen.
+ */
+static void ceph_dentry_release(struct dentry *dentry)
+{
+	struct ceph_dentry_info *di = ceph_dentry(dentry);
+	struct inode *parent_inode = dentry->d_parent->d_inode;
+
+	if (parent_inode) {
+		struct ceph_inode_info *ci = ceph_inode(parent_inode);
+
+		spin_lock(&parent_inode->i_lock);
+		if (ci->i_shared_gen == di->lease_shared_gen) {
+			dout(" clearing %p complete (d_release)\n",
+			     parent_inode);
+			ci->i_ceph_flags &= ~CEPH_I_COMPLETE;
+			ci->i_release_count++;
+		}
+		spin_unlock(&parent_inode->i_lock);
+	}
+	if (di) {
+		ceph_dentry_lru_del(dentry);
+		if (di->lease_session)
+			ceph_put_mds_session(di->lease_session);
+		kmem_cache_free(ceph_dentry_cachep, di);
+		dentry->d_fsdata = NULL;
+	}
+}
+
+static int ceph_snapdir_d_revalidate(struct dentry *dentry,
+					  struct nameidata *nd)
+{
+	/*
+	 * Eventually, we'll want to revalidate snapped metadata
+	 * too... probably...
+	 */
+	return 1;
+}
+
+
+
+/*
+ * read() on a dir.  This weird interface hack only works if mounted
+ * with '-o dirstat'.
+ */
+static ssize_t ceph_read_dir(struct file *file, char __user *buf, size_t size,
+			     loff_t *ppos)
+{
+	struct ceph_file_info *cf = file->private_data;
+	struct inode *inode = file->f_dentry->d_inode;
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	int left;
+
+	if (!ceph_test_opt(ceph_client(inode->i_sb), DIRSTAT))
+		return -EISDIR;
+
+	if (!cf->dir_info) {
+		cf->dir_info = kmalloc(1024, GFP_NOFS);
+		if (!cf->dir_info)
+			return -ENOMEM;
+		cf->dir_info_len =
+			sprintf(cf->dir_info,
+				"entries:   %20lld\n"
+				" files:    %20lld\n"
+				" subdirs:  %20lld\n"
+				"rentries:  %20lld\n"
+				" rfiles:   %20lld\n"
+				" rsubdirs: %20lld\n"
+				"rbytes:    %20lld\n"
+				"rctime:    %10ld.%09ld\n",
+				ci->i_files + ci->i_subdirs,
+				ci->i_files,
+				ci->i_subdirs,
+				ci->i_rfiles + ci->i_rsubdirs,
+				ci->i_rfiles,
+				ci->i_rsubdirs,
+				ci->i_rbytes,
+				(long)ci->i_rctime.tv_sec,
+				(long)ci->i_rctime.tv_nsec);
+	}
+
+	if (*ppos >= cf->dir_info_len)
+		return 0;
+	size = min_t(unsigned, size, cf->dir_info_len-*ppos);
+	left = copy_to_user(buf, cf->dir_info + *ppos, size);
+	if (left == size)
+		return -EFAULT;
+	*ppos += (size - left);
+	return size - left;
+}
+
+/*
+ * an fsync() on a dir will wait for any uncommitted directory
+ * operations to commit.
+ */
+static int ceph_dir_fsync(struct file *file, struct dentry *dentry,
+			  int datasync)
+{
+	struct inode *inode = dentry->d_inode;
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	struct list_head *head = &ci->i_unsafe_dirops;
+	struct ceph_mds_request *req;
+	u64 last_tid;
+	int ret = 0;
+
+	dout("dir_fsync %p\n", inode);
+	spin_lock(&ci->i_unsafe_lock);
+	if (list_empty(head))
+		goto out;
+
+	req = list_entry(head->prev,
+			 struct ceph_mds_request, r_unsafe_dir_item);
+	last_tid = req->r_tid;
+
+	do {
+		ceph_mdsc_get_request(req);
+		spin_unlock(&ci->i_unsafe_lock);
+		dout("dir_fsync %p wait on tid %llu (until %llu)\n",
+		     inode, req->r_tid, last_tid);
+		if (req->r_timeout) {
+			ret = wait_for_completion_timeout(
+				&req->r_safe_completion, req->r_timeout);
+			if (ret > 0)
+				ret = 0;
+			else if (ret == 0)
+				ret = -EIO;  /* timed out */
+		} else {
+			wait_for_completion(&req->r_safe_completion);
+		}
+		spin_lock(&ci->i_unsafe_lock);
+		ceph_mdsc_put_request(req);
+
+		if (ret || list_empty(head))
+			break;
+		req = list_entry(head->next,
+				 struct ceph_mds_request, r_unsafe_dir_item);
+	} while (req->r_tid < last_tid);
+out:
+	spin_unlock(&ci->i_unsafe_lock);
+	return ret;
+}
+
+/*
+ * We maintain a private dentry LRU.
+ *
+ * FIXME: this needs to be changed to a per-mds lru to be useful.
+ */
+void ceph_dentry_lru_add(struct dentry *dn)
+{
+	struct ceph_dentry_info *di = ceph_dentry(dn);
+	struct ceph_mds_client *mdsc;
+
+	dout("dentry_lru_add %p %p '%.*s'\n", di, dn,
+	     dn->d_name.len, dn->d_name.name);
+	if (di) {
+		mdsc = &ceph_client(dn->d_sb)->mdsc;
+		spin_lock(&mdsc->dentry_lru_lock);
+		list_add_tail(&di->lru, &mdsc->dentry_lru);
+		mdsc->num_dentry++;
+		spin_unlock(&mdsc->dentry_lru_lock);
+	}
+}
+
+void ceph_dentry_lru_touch(struct dentry *dn)
+{
+	struct ceph_dentry_info *di = ceph_dentry(dn);
+	struct ceph_mds_client *mdsc;
+
+	dout("dentry_lru_touch %p %p '%.*s'\n", di, dn,
+	     dn->d_name.len, dn->d_name.name);
+	if (di) {
+		mdsc = &ceph_client(dn->d_sb)->mdsc;
+		spin_lock(&mdsc->dentry_lru_lock);
+		list_move_tail(&di->lru, &mdsc->dentry_lru);
+		spin_unlock(&mdsc->dentry_lru_lock);
+	}
+}
+
+void ceph_dentry_lru_del(struct dentry *dn)
+{
+	struct ceph_dentry_info *di = ceph_dentry(dn);
+	struct ceph_mds_client *mdsc;
+
+	dout("dentry_lru_del %p %p '%.*s'\n", di, dn,
+	     dn->d_name.len, dn->d_name.name);
+	if (di) {
+		mdsc = &ceph_client(dn->d_sb)->mdsc;
+		spin_lock(&mdsc->dentry_lru_lock);
+		list_del_init(&di->lru);
+		mdsc->num_dentry--;
+		spin_unlock(&mdsc->dentry_lru_lock);
+	}
+}
+
+const struct file_operations ceph_dir_fops = {
+	.read = ceph_read_dir,
+	.readdir = ceph_readdir,
+	.llseek = ceph_dir_llseek,
+	.open = ceph_open,
+	.release = ceph_release,
+	.unlocked_ioctl = ceph_ioctl,
+	.fsync = ceph_dir_fsync,
+};
+
+const struct inode_operations ceph_dir_iops = {
+	.lookup = ceph_lookup,
+	.permission = ceph_permission,
+	.getattr = ceph_getattr,
+	.setattr = ceph_setattr,
+	.setxattr = ceph_setxattr,
+	.getxattr = ceph_getxattr,
+	.listxattr = ceph_listxattr,
+	.removexattr = ceph_removexattr,
+	.mknod = ceph_mknod,
+	.symlink = ceph_symlink,
+	.mkdir = ceph_mkdir,
+	.link = ceph_link,
+	.unlink = ceph_unlink,
+	.rmdir = ceph_unlink,
+	.rename = ceph_rename,
+	.create = ceph_create,
+};
+
+struct dentry_operations ceph_dentry_ops = {
+	.d_revalidate = ceph_d_revalidate,
+	.d_release = ceph_dentry_release,
+};
+
+struct dentry_operations ceph_snapdir_dentry_ops = {
+	.d_revalidate = ceph_snapdir_d_revalidate,
+};
+
+struct dentry_operations ceph_snap_dentry_ops = {
+};
diff --git a/fs/ceph/export.c b/fs/ceph/export.c
new file mode 100644
index 000000000000..fc68e39cbad6
--- /dev/null
+++ b/fs/ceph/export.c
@@ -0,0 +1,223 @@
+#include "ceph_debug.h"
+
+#include <linux/exportfs.h>
+#include <asm/unaligned.h>
+
+#include "super.h"
+
+/*
+ * NFS export support
+ *
+ * NFS re-export of a ceph mount is, at present, only semireliable.
+ * The basic issue is that the Ceph architectures doesn't lend itself
+ * well to generating filehandles that will remain valid forever.
+ *
+ * So, we do our best.  If you're lucky, your inode will be in the
+ * client's cache.  If it's not, and you have a connectable fh, then
+ * the MDS server may be able to find it for you.  Otherwise, you get
+ * ESTALE.
+ *
+ * There are ways to this more reliable, but in the non-connectable fh
+ * case, we won't every work perfectly, and in the connectable case,
+ * some changes are needed on the MDS side to work better.
+ */
+
+/*
+ * Basic fh
+ */
+struct ceph_nfs_fh {
+	u64 ino;
+} __attribute__ ((packed));
+
+/*
+ * Larger 'connectable' fh that includes parent ino and name hash.
+ * Use this whenever possible, as it works more reliably.
+ */
+struct ceph_nfs_confh {
+	u64 ino, parent_ino;
+	u32 parent_name_hash;
+} __attribute__ ((packed));
+
+static int ceph_encode_fh(struct dentry *dentry, u32 *rawfh, int *max_len,
+			  int connectable)
+{
+	struct ceph_nfs_fh *fh = (void *)rawfh;
+	struct ceph_nfs_confh *cfh = (void *)rawfh;
+	struct dentry *parent = dentry->d_parent;
+	struct inode *inode = dentry->d_inode;
+	int type;
+
+	/* don't re-export snaps */
+	if (ceph_snap(inode) != CEPH_NOSNAP)
+		return -EINVAL;
+
+	if (*max_len >= sizeof(*cfh)) {
+		dout("encode_fh %p connectable\n", dentry);
+		cfh->ino = ceph_ino(dentry->d_inode);
+		cfh->parent_ino = ceph_ino(parent->d_inode);
+		cfh->parent_name_hash = parent->d_name.hash;
+		*max_len = sizeof(*cfh);
+		type = 2;
+	} else if (*max_len > sizeof(*fh)) {
+		if (connectable)
+			return -ENOSPC;
+		dout("encode_fh %p\n", dentry);
+		fh->ino = ceph_ino(dentry->d_inode);
+		*max_len = sizeof(*fh);
+		type = 1;
+	} else {
+		return -ENOSPC;
+	}
+	return type;
+}
+
+/*
+ * convert regular fh to dentry
+ *
+ * FIXME: we should try harder by querying the mds for the ino.
+ */
+static struct dentry *__fh_to_dentry(struct super_block *sb,
+				     struct ceph_nfs_fh *fh)
+{
+	struct inode *inode;
+	struct dentry *dentry;
+	struct ceph_vino vino;
+	int err;
+
+	dout("__fh_to_dentry %llx\n", fh->ino);
+	vino.ino = fh->ino;
+	vino.snap = CEPH_NOSNAP;
+	inode = ceph_find_inode(sb, vino);
+	if (!inode)
+		return ERR_PTR(-ESTALE);
+
+	dentry = d_obtain_alias(inode);
+	if (!dentry) {
+		pr_err("fh_to_dentry %llx -- inode %p but ENOMEM\n",
+		       fh->ino, inode);
+		iput(inode);
+		return ERR_PTR(-ENOMEM);
+	}
+	err = ceph_init_dentry(dentry);
+
+	if (err < 0) {
+		iput(inode);
+		return ERR_PTR(err);
+	}
+	dout("__fh_to_dentry %llx %p dentry %p\n", fh->ino, inode, dentry);
+	return dentry;
+}
+
+/*
+ * convert connectable fh to dentry
+ */
+static struct dentry *__cfh_to_dentry(struct super_block *sb,
+				      struct ceph_nfs_confh *cfh)
+{
+	struct ceph_mds_client *mdsc = &ceph_client(sb)->mdsc;
+	struct inode *inode;
+	struct dentry *dentry;
+	struct ceph_vino vino;
+	int err;
+
+	dout("__cfh_to_dentry %llx (%llx/%x)\n",
+	     cfh->ino, cfh->parent_ino, cfh->parent_name_hash);
+
+	vino.ino = cfh->ino;
+	vino.snap = CEPH_NOSNAP;
+	inode = ceph_find_inode(sb, vino);
+	if (!inode) {
+		struct ceph_mds_request *req;
+
+		req = ceph_mdsc_create_request(mdsc, CEPH_MDS_OP_LOOKUPHASH,
+					       USE_ANY_MDS);
+		if (IS_ERR(req))
+			return ERR_PTR(PTR_ERR(req));
+
+		req->r_ino1 = vino;
+		req->r_ino2.ino = cfh->parent_ino;
+		req->r_ino2.snap = CEPH_NOSNAP;
+		req->r_path2 = kmalloc(16, GFP_NOFS);
+		snprintf(req->r_path2, 16, "%d", cfh->parent_name_hash);
+		req->r_num_caps = 1;
+		err = ceph_mdsc_do_request(mdsc, NULL, req);
+		ceph_mdsc_put_request(req);
+		inode = ceph_find_inode(sb, vino);
+		if (!inode)
+			return ERR_PTR(err ? err : -ESTALE);
+	}
+
+	dentry = d_obtain_alias(inode);
+	if (!dentry) {
+		pr_err("cfh_to_dentry %llx -- inode %p but ENOMEM\n",
+		       cfh->ino, inode);
+		iput(inode);
+		return ERR_PTR(-ENOMEM);
+	}
+	err = ceph_init_dentry(dentry);
+	if (err < 0) {
+		iput(inode);
+		return ERR_PTR(err);
+	}
+	dout("__cfh_to_dentry %llx %p dentry %p\n", cfh->ino, inode, dentry);
+	return dentry;
+}
+
+static struct dentry *ceph_fh_to_dentry(struct super_block *sb, struct fid *fid,
+					int fh_len, int fh_type)
+{
+	if (fh_type == 1)
+		return __fh_to_dentry(sb, (struct ceph_nfs_fh *)fid->raw);
+	else
+		return __cfh_to_dentry(sb, (struct ceph_nfs_confh *)fid->raw);
+}
+
+/*
+ * get parent, if possible.
+ *
+ * FIXME: we could do better by querying the mds to discover the
+ * parent.
+ */
+static struct dentry *ceph_fh_to_parent(struct super_block *sb,
+					 struct fid *fid,
+					int fh_len, int fh_type)
+{
+	struct ceph_nfs_confh *cfh = (void *)fid->raw;
+	struct ceph_vino vino;
+	struct inode *inode;
+	struct dentry *dentry;
+	int err;
+
+	if (fh_type == 1)
+		return ERR_PTR(-ESTALE);
+
+	pr_debug("fh_to_parent %llx/%d\n", cfh->parent_ino,
+		 cfh->parent_name_hash);
+
+	vino.ino = cfh->ino;
+	vino.snap = CEPH_NOSNAP;
+	inode = ceph_find_inode(sb, vino);
+	if (!inode)
+		return ERR_PTR(-ESTALE);
+
+	dentry = d_obtain_alias(inode);
+	if (!dentry) {
+		pr_err("fh_to_parent %llx -- inode %p but ENOMEM\n",
+		       cfh->ino, inode);
+		iput(inode);
+		return ERR_PTR(-ENOMEM);
+	}
+	err = ceph_init_dentry(dentry);
+	if (err < 0) {
+		iput(inode);
+		return ERR_PTR(err);
+	}
+	dout("fh_to_parent %llx %p dentry %p\n", cfh->ino, inode, dentry);
+	return dentry;
+}
+
+const struct export_operations ceph_export_ops = {
+	.encode_fh = ceph_encode_fh,
+	.fh_to_dentry = ceph_fh_to_dentry,
+	.fh_to_parent = ceph_fh_to_parent,
+};
diff --git a/fs/ceph/file.c b/fs/ceph/file.c
new file mode 100644
index 000000000000..5d2af8464f6a
--- /dev/null
+++ b/fs/ceph/file.c
@@ -0,0 +1,937 @@
+#include "ceph_debug.h"
+
+#include <linux/sched.h>
+#include <linux/file.h>
+#include <linux/namei.h>
+#include <linux/writeback.h>
+
+#include "super.h"
+#include "mds_client.h"
+
+/*
+ * Ceph file operations
+ *
+ * Implement basic open/close functionality, and implement
+ * read/write.
+ *
+ * We implement three modes of file I/O:
+ *  - buffered uses the generic_file_aio_{read,write} helpers
+ *
+ *  - synchronous is used when there is multi-client read/write
+ *    sharing, avoids the page cache, and synchronously waits for an
+ *    ack from the OSD.
+ *
+ *  - direct io takes the variant of the sync path that references
+ *    user pages directly.
+ *
+ * fsync() flushes and waits on dirty pages, but just queues metadata
+ * for writeback: since the MDS can recover size and mtime there is no
+ * need to wait for MDS acknowledgement.
+ */
+
+
+/*
+ * Prepare an open request.  Preallocate ceph_cap to avoid an
+ * inopportune ENOMEM later.
+ */
+static struct ceph_mds_request *
+prepare_open_request(struct super_block *sb, int flags, int create_mode)
+{
+	struct ceph_client *client = ceph_sb_to_client(sb);
+	struct ceph_mds_client *mdsc = &client->mdsc;
+	struct ceph_mds_request *req;
+	int want_auth = USE_ANY_MDS;
+	int op = (flags & O_CREAT) ? CEPH_MDS_OP_CREATE : CEPH_MDS_OP_OPEN;
+
+	if (flags & (O_WRONLY|O_RDWR|O_CREAT|O_TRUNC))
+		want_auth = USE_AUTH_MDS;
+
+	req = ceph_mdsc_create_request(mdsc, op, want_auth);
+	if (IS_ERR(req))
+		goto out;
+	req->r_fmode = ceph_flags_to_mode(flags);
+	req->r_args.open.flags = cpu_to_le32(flags);
+	req->r_args.open.mode = cpu_to_le32(create_mode);
+	req->r_args.open.preferred = cpu_to_le32(-1);
+out:
+	return req;
+}
+
+/*
+ * initialize private struct file data.
+ * if we fail, clean up by dropping fmode reference on the ceph_inode
+ */
+static int ceph_init_file(struct inode *inode, struct file *file, int fmode)
+{
+	struct ceph_file_info *cf;
+	int ret = 0;
+
+	switch (inode->i_mode & S_IFMT) {
+	case S_IFREG:
+	case S_IFDIR:
+		dout("init_file %p %p 0%o (regular)\n", inode, file,
+		     inode->i_mode);
+		cf = kmem_cache_alloc(ceph_file_cachep, GFP_NOFS | __GFP_ZERO);
+		if (cf == NULL) {
+			ceph_put_fmode(ceph_inode(inode), fmode); /* clean up */
+			return -ENOMEM;
+		}
+		cf->fmode = fmode;
+		cf->next_offset = 2;
+		file->private_data = cf;
+		BUG_ON(inode->i_fop->release != ceph_release);
+		break;
+
+	case S_IFLNK:
+		dout("init_file %p %p 0%o (symlink)\n", inode, file,
+		     inode->i_mode);
+		ceph_put_fmode(ceph_inode(inode), fmode); /* clean up */
+		break;
+
+	default:
+		dout("init_file %p %p 0%o (special)\n", inode, file,
+		     inode->i_mode);
+		/*
+		 * we need to drop the open ref now, since we don't
+		 * have .release set to ceph_release.
+		 */
+		ceph_put_fmode(ceph_inode(inode), fmode); /* clean up */
+		BUG_ON(inode->i_fop->release == ceph_release);
+
+		/* call the proper open fop */
+		ret = inode->i_fop->open(inode, file);
+	}
+	return ret;
+}
+
+/*
+ * If the filp already has private_data, that means the file was
+ * already opened by intent during lookup, and we do nothing.
+ *
+ * If we already have the requisite capabilities, we can satisfy
+ * the open request locally (no need to request new caps from the
+ * MDS).  We do, however, need to inform the MDS (asynchronously)
+ * if our wanted caps set expands.
+ */
+int ceph_open(struct inode *inode, struct file *file)
+{
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	struct ceph_client *client = ceph_sb_to_client(inode->i_sb);
+	struct ceph_mds_client *mdsc = &client->mdsc;
+	struct ceph_mds_request *req;
+	struct ceph_file_info *cf = file->private_data;
+	struct inode *parent_inode = file->f_dentry->d_parent->d_inode;
+	int err;
+	int flags, fmode, wanted;
+
+	if (cf) {
+		dout("open file %p is already opened\n", file);
+		return 0;
+	}
+
+	/* filter out O_CREAT|O_EXCL; vfs did that already.  yuck. */
+	flags = file->f_flags & ~(O_CREAT|O_EXCL);
+	if (S_ISDIR(inode->i_mode))
+		flags = O_DIRECTORY;  /* mds likes to know */
+
+	dout("open inode %p ino %llx.%llx file %p flags %d (%d)\n", inode,
+	     ceph_vinop(inode), file, flags, file->f_flags);
+	fmode = ceph_flags_to_mode(flags);
+	wanted = ceph_caps_for_mode(fmode);
+
+	/* snapped files are read-only */
+	if (ceph_snap(inode) != CEPH_NOSNAP && (file->f_mode & FMODE_WRITE))
+		return -EROFS;
+
+	/* trivially open snapdir */
+	if (ceph_snap(inode) == CEPH_SNAPDIR) {
+		spin_lock(&inode->i_lock);
+		__ceph_get_fmode(ci, fmode);
+		spin_unlock(&inode->i_lock);
+		return ceph_init_file(inode, file, fmode);
+	}
+
+	/*
+	 * No need to block if we have any caps.  Update wanted set
+	 * asynchronously.
+	 */
+	spin_lock(&inode->i_lock);
+	if (__ceph_is_any_real_caps(ci)) {
+		int mds_wanted = __ceph_caps_mds_wanted(ci);
+		int issued = __ceph_caps_issued(ci, NULL);
+
+		dout("open %p fmode %d want %s issued %s using existing\n",
+		     inode, fmode, ceph_cap_string(wanted),
+		     ceph_cap_string(issued));
+		__ceph_get_fmode(ci, fmode);
+		spin_unlock(&inode->i_lock);
+
+		/* adjust wanted? */
+		if ((issued & wanted) != wanted &&
+		    (mds_wanted & wanted) != wanted &&
+		    ceph_snap(inode) != CEPH_SNAPDIR)
+			ceph_check_caps(ci, 0, NULL);
+
+		return ceph_init_file(inode, file, fmode);
+	} else if (ceph_snap(inode) != CEPH_NOSNAP &&
+		   (ci->i_snap_caps & wanted) == wanted) {
+		__ceph_get_fmode(ci, fmode);
+		spin_unlock(&inode->i_lock);
+		return ceph_init_file(inode, file, fmode);
+	}
+	spin_unlock(&inode->i_lock);
+
+	dout("open fmode %d wants %s\n", fmode, ceph_cap_string(wanted));
+	req = prepare_open_request(inode->i_sb, flags, 0);
+	if (IS_ERR(req)) {
+		err = PTR_ERR(req);
+		goto out;
+	}
+	req->r_inode = igrab(inode);
+	req->r_num_caps = 1;
+	err = ceph_mdsc_do_request(mdsc, parent_inode, req);
+	if (!err)
+		err = ceph_init_file(inode, file, req->r_fmode);
+	ceph_mdsc_put_request(req);
+	dout("open result=%d on %llx.%llx\n", err, ceph_vinop(inode));
+out:
+	return err;
+}
+
+
+/*
+ * Do a lookup + open with a single request.
+ *
+ * If this succeeds, but some subsequent check in the vfs
+ * may_open() fails, the struct *file gets cleaned up (i.e.
+ * ceph_release gets called).  So fear not!
+ */
+/*
+ * flags
+ *  path_lookup_open   -> LOOKUP_OPEN
+ *  path_lookup_create -> LOOKUP_OPEN|LOOKUP_CREATE
+ */
+struct dentry *ceph_lookup_open(struct inode *dir, struct dentry *dentry,
+				struct nameidata *nd, int mode,
+				int locked_dir)
+{
+	struct ceph_client *client = ceph_sb_to_client(dir->i_sb);
+	struct ceph_mds_client *mdsc = &client->mdsc;
+	struct file *file = nd->intent.open.file;
+	struct inode *parent_inode = get_dentry_parent_inode(file->f_dentry);
+	struct ceph_mds_request *req;
+	int err;
+	int flags = nd->intent.open.flags - 1;  /* silly vfs! */
+
+	dout("ceph_lookup_open dentry %p '%.*s' flags %d mode 0%o\n",
+	     dentry, dentry->d_name.len, dentry->d_name.name, flags, mode);
+
+	/* do the open */
+	req = prepare_open_request(dir->i_sb, flags, mode);
+	if (IS_ERR(req))
+		return ERR_PTR(PTR_ERR(req));
+	req->r_dentry = dget(dentry);
+	req->r_num_caps = 2;
+	if (flags & O_CREAT) {
+		req->r_dentry_drop = CEPH_CAP_FILE_SHARED;
+		req->r_dentry_unless = CEPH_CAP_FILE_EXCL;
+	}
+	req->r_locked_dir = dir;           /* caller holds dir->i_mutex */
+	err = ceph_mdsc_do_request(mdsc, parent_inode, req);
+	dentry = ceph_finish_lookup(req, dentry, err);
+	if (!err && (flags & O_CREAT) && !req->r_reply_info.head->is_dentry)
+		err = ceph_handle_notrace_create(dir, dentry);
+	if (!err)
+		err = ceph_init_file(req->r_dentry->d_inode, file,
+				     req->r_fmode);
+	ceph_mdsc_put_request(req);
+	dout("ceph_lookup_open result=%p\n", dentry);
+	return dentry;
+}
+
+int ceph_release(struct inode *inode, struct file *file)
+{
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	struct ceph_file_info *cf = file->private_data;
+
+	dout("release inode %p file %p\n", inode, file);
+	ceph_put_fmode(ci, cf->fmode);
+	if (cf->last_readdir)
+		ceph_mdsc_put_request(cf->last_readdir);
+	kfree(cf->last_name);
+	kfree(cf->dir_info);
+	dput(cf->dentry);
+	kmem_cache_free(ceph_file_cachep, cf);
+
+	/* wake up anyone waiting for caps on this inode */
+	wake_up(&ci->i_cap_wq);
+	return 0;
+}
+
+/*
+ * build a vector of user pages
+ */
+static struct page **get_direct_page_vector(const char __user *data,
+					    int num_pages,
+					    loff_t off, size_t len)
+{
+	struct page **pages;
+	int rc;
+
+	pages = kmalloc(sizeof(*pages) * num_pages, GFP_NOFS);
+	if (!pages)
+		return ERR_PTR(-ENOMEM);
+
+	down_read(&current->mm->mmap_sem);
+	rc = get_user_pages(current, current->mm, (unsigned long)data,
+			    num_pages, 0, 0, pages, NULL);
+	up_read(&current->mm->mmap_sem);
+	if (rc < 0)
+		goto fail;
+	return pages;
+
+fail:
+	kfree(pages);
+	return ERR_PTR(rc);
+}
+
+static void put_page_vector(struct page **pages, int num_pages)
+{
+	int i;
+
+	for (i = 0; i < num_pages; i++)
+		put_page(pages[i]);
+	kfree(pages);
+}
+
+void ceph_release_page_vector(struct page **pages, int num_pages)
+{
+	int i;
+
+	for (i = 0; i < num_pages; i++)
+		__free_pages(pages[i], 0);
+	kfree(pages);
+}
+
+/*
+ * allocate a vector new pages
+ */
+static struct page **alloc_page_vector(int num_pages)
+{
+	struct page **pages;
+	int i;
+
+	pages = kmalloc(sizeof(*pages) * num_pages, GFP_NOFS);
+	if (!pages)
+		return ERR_PTR(-ENOMEM);
+	for (i = 0; i < num_pages; i++) {
+		pages[i] = alloc_page(GFP_NOFS);
+		if (pages[i] == NULL) {
+			ceph_release_page_vector(pages, i);
+			return ERR_PTR(-ENOMEM);
+		}
+	}
+	return pages;
+}
+
+/*
+ * copy user data into a page vector
+ */
+static int copy_user_to_page_vector(struct page **pages,
+				    const char __user *data,
+				    loff_t off, size_t len)
+{
+	int i = 0;
+	int po = off & ~PAGE_CACHE_MASK;
+	int left = len;
+	int l, bad;
+
+	while (left > 0) {
+		l = min_t(int, PAGE_CACHE_SIZE-po, left);
+		bad = copy_from_user(page_address(pages[i]) + po, data, l);
+		if (bad == l)
+			return -EFAULT;
+		data += l - bad;
+		left -= l - bad;
+		po += l - bad;
+		if (po == PAGE_CACHE_SIZE) {
+			po = 0;
+			i++;
+		}
+	}
+	return len;
+}
+
+/*
+ * copy user data from a page vector into a user pointer
+ */
+static int copy_page_vector_to_user(struct page **pages, char __user *data,
+				    loff_t off, size_t len)
+{
+	int i = 0;
+	int po = off & ~PAGE_CACHE_MASK;
+	int left = len;
+	int l, bad;
+
+	while (left > 0) {
+		l = min_t(int, left, PAGE_CACHE_SIZE-po);
+		bad = copy_to_user(data, page_address(pages[i]) + po, l);
+		if (bad == l)
+			return -EFAULT;
+		data += l - bad;
+		left -= l - bad;
+		if (po) {
+			po += l - bad;
+			if (po == PAGE_CACHE_SIZE)
+				po = 0;
+		}
+		i++;
+	}
+	return len;
+}
+
+/*
+ * Zero an extent within a page vector.  Offset is relative to the
+ * start of the first page.
+ */
+static void zero_page_vector_range(int off, int len, struct page **pages)
+{
+	int i = off >> PAGE_CACHE_SHIFT;
+
+	off &= ~PAGE_CACHE_MASK;
+
+	dout("zero_page_vector_page %u~%u\n", off, len);
+
+	/* leading partial page? */
+	if (off) {
+		int end = min((int)PAGE_CACHE_SIZE, off + len);
+		dout("zeroing %d %p head from %d\n", i, pages[i],
+		     (int)off);
+		zero_user_segment(pages[i], off, end);
+		len -= (end - off);
+		i++;
+	}
+	while (len >= PAGE_CACHE_SIZE) {
+		dout("zeroing %d %p len=%d\n", i, pages[i], len);
+		zero_user_segment(pages[i], 0, PAGE_CACHE_SIZE);
+		len -= PAGE_CACHE_SIZE;
+		i++;
+	}
+	/* trailing partial page? */
+	if (len) {
+		dout("zeroing %d %p tail to %d\n", i, pages[i], (int)len);
+		zero_user_segment(pages[i], 0, len);
+	}
+}
+
+
+/*
+ * Read a range of bytes striped over one or more objects.  Iterate over
+ * objects we stripe over.  (That's not atomic, but good enough for now.)
+ *
+ * If we get a short result from the OSD, check against i_size; we need to
+ * only return a short read to the caller if we hit EOF.
+ */
+static int striped_read(struct inode *inode,
+			u64 off, u64 len,
+			struct page **pages, int num_pages,
+			int *checkeof)
+{
+	struct ceph_client *client = ceph_inode_to_client(inode);
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	u64 pos, this_len;
+	int page_off = off & ~PAGE_CACHE_MASK; /* first byte's offset in page */
+	int left, pages_left;
+	int read;
+	struct page **page_pos;
+	int ret;
+	bool hit_stripe, was_short;
+
+	/*
+	 * we may need to do multiple reads.  not atomic, unfortunately.
+	 */
+	pos = off;
+	left = len;
+	page_pos = pages;
+	pages_left = num_pages;
+	read = 0;
+
+more:
+	this_len = left;
+	ret = ceph_osdc_readpages(&client->osdc, ceph_vino(inode),
+				  &ci->i_layout, pos, &this_len,
+				  ci->i_truncate_seq,
+				  ci->i_truncate_size,
+				  page_pos, pages_left);
+	hit_stripe = this_len < left;
+	was_short = ret >= 0 && ret < this_len;
+	if (ret == -ENOENT)
+		ret = 0;
+	dout("striped_read %llu~%u (read %u) got %d%s%s\n", pos, left, read,
+	     ret, hit_stripe ? " HITSTRIPE" : "", was_short ? " SHORT" : "");
+
+	if (ret > 0) {
+		int didpages =
+			((pos & ~PAGE_CACHE_MASK) + ret) >> PAGE_CACHE_SHIFT;
+
+		if (read < pos - off) {
+			dout(" zero gap %llu to %llu\n", off + read, pos);
+			zero_page_vector_range(page_off + read,
+					       pos - off - read, pages);
+		}
+		pos += ret;
+		read = pos - off;
+		left -= ret;
+		page_pos += didpages;
+		pages_left -= didpages;
+
+		/* hit stripe? */
+		if (left && hit_stripe)
+			goto more;
+	}
+
+	if (was_short) {
+		/* was original extent fully inside i_size? */
+		if (pos + left <= inode->i_size) {
+			dout("zero tail\n");
+			zero_page_vector_range(page_off + read, len - read,
+					       pages);
+			read = len;
+			goto out;
+		}
+
+		/* check i_size */
+		*checkeof = 1;
+	}
+
+out:
+	if (ret >= 0)
+		ret = read;
+	dout("striped_read returns %d\n", ret);
+	return ret;
+}
+
+/*
+ * Completely synchronous read and write methods.  Direct from __user
+ * buffer to osd, or directly to user pages (if O_DIRECT).
+ *
+ * If the read spans object boundary, just do multiple reads.
+ */
+static ssize_t ceph_sync_read(struct file *file, char __user *data,
+			      unsigned len, loff_t *poff, int *checkeof)
+{
+	struct inode *inode = file->f_dentry->d_inode;
+	struct page **pages;
+	u64 off = *poff;
+	int num_pages = calc_pages_for(off, len);
+	int ret;
+
+	dout("sync_read on file %p %llu~%u %s\n", file, off, len,
+	     (file->f_flags & O_DIRECT) ? "O_DIRECT" : "");
+
+	if (file->f_flags & O_DIRECT) {
+		pages = get_direct_page_vector(data, num_pages, off, len);
+
+		/*
+		 * flush any page cache pages in this range.  this
+		 * will make concurrent normal and O_DIRECT io slow,
+		 * but it will at least behave sensibly when they are
+		 * in sequence.
+		 */
+	} else {
+		pages = alloc_page_vector(num_pages);
+	}
+	if (IS_ERR(pages))
+		return PTR_ERR(pages);
+
+	ret = filemap_write_and_wait(inode->i_mapping);
+	if (ret < 0)
+		goto done;
+
+	ret = striped_read(inode, off, len, pages, num_pages, checkeof);
+
+	if (ret >= 0 && (file->f_flags & O_DIRECT) == 0)
+		ret = copy_page_vector_to_user(pages, data, off, ret);
+	if (ret >= 0)
+		*poff = off + ret;
+
+done:
+	if (file->f_flags & O_DIRECT)
+		put_page_vector(pages, num_pages);
+	else
+		ceph_release_page_vector(pages, num_pages);
+	dout("sync_read result %d\n", ret);
+	return ret;
+}
+
+/*
+ * Write commit callback, called if we requested both an ACK and
+ * ONDISK commit reply from the OSD.
+ */
+static void sync_write_commit(struct ceph_osd_request *req,
+			      struct ceph_msg *msg)
+{
+	struct ceph_inode_info *ci = ceph_inode(req->r_inode);
+
+	dout("sync_write_commit %p tid %llu\n", req, req->r_tid);
+	spin_lock(&ci->i_unsafe_lock);
+	list_del_init(&req->r_unsafe_item);
+	spin_unlock(&ci->i_unsafe_lock);
+	ceph_put_cap_refs(ci, CEPH_CAP_FILE_WR);
+}
+
+/*
+ * Synchronous write, straight from __user pointer or user pages (if
+ * O_DIRECT).
+ *
+ * If write spans object boundary, just do multiple writes.  (For a
+ * correct atomic write, we should e.g. take write locks on all
+ * objects, rollback on failure, etc.)
+ */
+static ssize_t ceph_sync_write(struct file *file, const char __user *data,
+			       size_t left, loff_t *offset)
+{
+	struct inode *inode = file->f_dentry->d_inode;
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	struct ceph_client *client = ceph_inode_to_client(inode);
+	struct ceph_osd_request *req;
+	struct page **pages;
+	int num_pages;
+	long long unsigned pos;
+	u64 len;
+	int written = 0;
+	int flags;
+	int do_sync = 0;
+	int check_caps = 0;
+	int ret;
+	struct timespec mtime = CURRENT_TIME;
+
+	if (ceph_snap(file->f_dentry->d_inode) != CEPH_NOSNAP)
+		return -EROFS;
+
+	dout("sync_write on file %p %lld~%u %s\n", file, *offset,
+	     (unsigned)left, (file->f_flags & O_DIRECT) ? "O_DIRECT" : "");
+
+	if (file->f_flags & O_APPEND)
+		pos = i_size_read(inode);
+	else
+		pos = *offset;
+
+	ret = filemap_write_and_wait_range(inode->i_mapping, pos, pos + left);
+	if (ret < 0)
+		return ret;
+
+	ret = invalidate_inode_pages2_range(inode->i_mapping,
+					    pos >> PAGE_CACHE_SHIFT,
+					    (pos + left) >> PAGE_CACHE_SHIFT);
+	if (ret < 0)
+		dout("invalidate_inode_pages2_range returned %d\n", ret);
+
+	flags = CEPH_OSD_FLAG_ORDERSNAP |
+		CEPH_OSD_FLAG_ONDISK |
+		CEPH_OSD_FLAG_WRITE;
+	if ((file->f_flags & (O_SYNC|O_DIRECT)) == 0)
+		flags |= CEPH_OSD_FLAG_ACK;
+	else
+		do_sync = 1;
+
+	/*
+	 * we may need to do multiple writes here if we span an object
+	 * boundary.  this isn't atomic, unfortunately.  :(
+	 */
+more:
+	len = left;
+	req = ceph_osdc_new_request(&client->osdc, &ci->i_layout,
+				    ceph_vino(inode), pos, &len,
+				    CEPH_OSD_OP_WRITE, flags,
+				    ci->i_snap_realm->cached_context,
+				    do_sync,
+				    ci->i_truncate_seq, ci->i_truncate_size,
+				    &mtime, false, 2);
+	if (IS_ERR(req))
+		return PTR_ERR(req);
+
+	num_pages = calc_pages_for(pos, len);
+
+	if (file->f_flags & O_DIRECT) {
+		pages = get_direct_page_vector(data, num_pages, pos, len);
+		if (IS_ERR(pages)) {
+			ret = PTR_ERR(pages);
+			goto out;
+		}
+
+		/*
+		 * throw out any page cache pages in this range. this
+		 * may block.
+		 */
+		truncate_inode_pages_range(inode->i_mapping, pos, pos+len);
+	} else {
+		pages = alloc_page_vector(num_pages);
+		if (IS_ERR(pages)) {
+			ret = PTR_ERR(pages);
+			goto out;
+		}
+		ret = copy_user_to_page_vector(pages, data, pos, len);
+		if (ret < 0) {
+			ceph_release_page_vector(pages, num_pages);
+			goto out;
+		}
+
+		if ((file->f_flags & O_SYNC) == 0) {
+			/* get a second commit callback */
+			req->r_safe_callback = sync_write_commit;
+			req->r_own_pages = 1;
+		}
+	}
+	req->r_pages = pages;
+	req->r_num_pages = num_pages;
+	req->r_inode = inode;
+
+	ret = ceph_osdc_start_request(&client->osdc, req, false);
+	if (!ret) {
+		if (req->r_safe_callback) {
+			/*
+			 * Add to inode unsafe list only after we
+			 * start_request so that a tid has been assigned.
+			 */
+			spin_lock(&ci->i_unsafe_lock);
+			list_add(&ci->i_unsafe_writes, &req->r_unsafe_item);
+			spin_unlock(&ci->i_unsafe_lock);
+			ceph_get_cap_refs(ci, CEPH_CAP_FILE_WR);
+		}
+		ret = ceph_osdc_wait_request(&client->osdc, req);
+	}
+
+	if (file->f_flags & O_DIRECT)
+		put_page_vector(pages, num_pages);
+	else if (file->f_flags & O_SYNC)
+		ceph_release_page_vector(pages, num_pages);
+
+out:
+	ceph_osdc_put_request(req);
+	if (ret == 0) {
+		pos += len;
+		written += len;
+		left -= len;
+		if (left)
+			goto more;
+
+		ret = written;
+		*offset = pos;
+		if (pos > i_size_read(inode))
+			check_caps = ceph_inode_set_size(inode, pos);
+		if (check_caps)
+			ceph_check_caps(ceph_inode(inode), CHECK_CAPS_AUTHONLY,
+					NULL);
+	}
+	return ret;
+}
+
+/*
+ * Wrap generic_file_aio_read with checks for cap bits on the inode.
+ * Atomically grab references, so that those bits are not released
+ * back to the MDS mid-read.
+ *
+ * Hmm, the sync read case isn't actually async... should it be?
+ */
+static ssize_t ceph_aio_read(struct kiocb *iocb, const struct iovec *iov,
+			     unsigned long nr_segs, loff_t pos)
+{
+	struct file *filp = iocb->ki_filp;
+	loff_t *ppos = &iocb->ki_pos;
+	size_t len = iov->iov_len;
+	struct inode *inode = filp->f_dentry->d_inode;
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	void *base = iov->iov_base;
+	ssize_t ret;
+	int got = 0;
+	int checkeof = 0, read = 0;
+
+	dout("aio_read %p %llx.%llx %llu~%u trying to get caps on %p\n",
+	     inode, ceph_vinop(inode), pos, (unsigned)len, inode);
+again:
+	__ceph_do_pending_vmtruncate(inode);
+	ret = ceph_get_caps(ci, CEPH_CAP_FILE_RD, CEPH_CAP_FILE_CACHE,
+			    &got, -1);
+	if (ret < 0)
+		goto out;
+	dout("aio_read %p %llx.%llx %llu~%u got cap refs on %s\n",
+	     inode, ceph_vinop(inode), pos, (unsigned)len,
+	     ceph_cap_string(got));
+
+	if ((got & CEPH_CAP_FILE_CACHE) == 0 ||
+	    (iocb->ki_filp->f_flags & O_DIRECT) ||
+	    (inode->i_sb->s_flags & MS_SYNCHRONOUS))
+		/* hmm, this isn't really async... */
+		ret = ceph_sync_read(filp, base, len, ppos, &checkeof);
+	else
+		ret = generic_file_aio_read(iocb, iov, nr_segs, pos);
+
+out:
+	dout("aio_read %p %llx.%llx dropping cap refs on %s = %d\n",
+	     inode, ceph_vinop(inode), ceph_cap_string(got), (int)ret);
+	ceph_put_cap_refs(ci, got);
+
+	if (checkeof && ret >= 0) {
+		int statret = ceph_do_getattr(inode, CEPH_STAT_CAP_SIZE);
+
+		/* hit EOF or hole? */
+		if (statret == 0 && *ppos < inode->i_size) {
+			dout("aio_read sync_read hit hole, reading more\n");
+			read += ret;
+			base += ret;
+			len -= ret;
+			checkeof = 0;
+			goto again;
+		}
+	}
+	if (ret >= 0)
+		ret += read;
+
+	return ret;
+}
+
+/*
+ * Take cap references to avoid releasing caps to MDS mid-write.
+ *
+ * If we are synchronous, and write with an old snap context, the OSD
+ * may return EOLDSNAPC.  In that case, retry the write.. _after_
+ * dropping our cap refs and allowing the pending snap to logically
+ * complete _before_ this write occurs.
+ *
+ * If we are near ENOSPC, write synchronously.
+ */
+static ssize_t ceph_aio_write(struct kiocb *iocb, const struct iovec *iov,
+		       unsigned long nr_segs, loff_t pos)
+{
+	struct file *file = iocb->ki_filp;
+	struct inode *inode = file->f_dentry->d_inode;
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	struct ceph_osd_client *osdc = &ceph_client(inode->i_sb)->osdc;
+	loff_t endoff = pos + iov->iov_len;
+	int got = 0;
+	int ret, err;
+
+	if (ceph_snap(inode) != CEPH_NOSNAP)
+		return -EROFS;
+
+retry_snap:
+	if (ceph_osdmap_flag(osdc->osdmap, CEPH_OSDMAP_FULL))
+		return -ENOSPC;
+	__ceph_do_pending_vmtruncate(inode);
+	dout("aio_write %p %llx.%llx %llu~%u getting caps. i_size %llu\n",
+	     inode, ceph_vinop(inode), pos, (unsigned)iov->iov_len,
+	     inode->i_size);
+	ret = ceph_get_caps(ci, CEPH_CAP_FILE_WR, CEPH_CAP_FILE_BUFFER,
+			    &got, endoff);
+	if (ret < 0)
+		goto out;
+
+	dout("aio_write %p %llx.%llx %llu~%u  got cap refs on %s\n",
+	     inode, ceph_vinop(inode), pos, (unsigned)iov->iov_len,
+	     ceph_cap_string(got));
+
+	if ((got & CEPH_CAP_FILE_BUFFER) == 0 ||
+	    (iocb->ki_filp->f_flags & O_DIRECT) ||
+	    (inode->i_sb->s_flags & MS_SYNCHRONOUS)) {
+		ret = ceph_sync_write(file, iov->iov_base, iov->iov_len,
+			&iocb->ki_pos);
+	} else {
+		ret = generic_file_aio_write(iocb, iov, nr_segs, pos);
+
+		if ((ret >= 0 || ret == -EIOCBQUEUED) &&
+		    ((file->f_flags & O_SYNC) || IS_SYNC(file->f_mapping->host)
+		     || ceph_osdmap_flag(osdc->osdmap, CEPH_OSDMAP_NEARFULL))) {
+			err = vfs_fsync_range(file, file->f_path.dentry,
+					      pos, pos + ret - 1, 1);
+			if (err < 0)
+				ret = err;
+		}
+	}
+	if (ret >= 0) {
+		spin_lock(&inode->i_lock);
+		__ceph_mark_dirty_caps(ci, CEPH_CAP_FILE_WR);
+		spin_unlock(&inode->i_lock);
+	}
+
+out:
+	dout("aio_write %p %llx.%llx %llu~%u  dropping cap refs on %s\n",
+	     inode, ceph_vinop(inode), pos, (unsigned)iov->iov_len,
+	     ceph_cap_string(got));
+	ceph_put_cap_refs(ci, got);
+
+	if (ret == -EOLDSNAPC) {
+		dout("aio_write %p %llx.%llx %llu~%u got EOLDSNAPC, retrying\n",
+		     inode, ceph_vinop(inode), pos, (unsigned)iov->iov_len);
+		goto retry_snap;
+	}
+
+	return ret;
+}
+
+/*
+ * llseek.  be sure to verify file size on SEEK_END.
+ */
+static loff_t ceph_llseek(struct file *file, loff_t offset, int origin)
+{
+	struct inode *inode = file->f_mapping->host;
+	int ret;
+
+	mutex_lock(&inode->i_mutex);
+	__ceph_do_pending_vmtruncate(inode);
+	switch (origin) {
+	case SEEK_END:
+		ret = ceph_do_getattr(inode, CEPH_STAT_CAP_SIZE);
+		if (ret < 0) {
+			offset = ret;
+			goto out;
+		}
+		offset += inode->i_size;
+		break;
+	case SEEK_CUR:
+		/*
+		 * Here we special-case the lseek(fd, 0, SEEK_CUR)
+		 * position-querying operation.  Avoid rewriting the "same"
+		 * f_pos value back to the file because a concurrent read(),
+		 * write() or lseek() might have altered it
+		 */
+		if (offset == 0) {
+			offset = file->f_pos;
+			goto out;
+		}
+		offset += file->f_pos;
+		break;
+	}
+
+	if (offset < 0 || offset > inode->i_sb->s_maxbytes) {
+		offset = -EINVAL;
+		goto out;
+	}
+
+	/* Special lock needed here? */
+	if (offset != file->f_pos) {
+		file->f_pos = offset;
+		file->f_version = 0;
+	}
+
+out:
+	mutex_unlock(&inode->i_mutex);
+	return offset;
+}
+
+const struct file_operations ceph_file_fops = {
+	.open = ceph_open,
+	.release = ceph_release,
+	.llseek = ceph_llseek,
+	.read = do_sync_read,
+	.write = do_sync_write,
+	.aio_read = ceph_aio_read,
+	.aio_write = ceph_aio_write,
+	.mmap = ceph_mmap,
+	.fsync = ceph_fsync,
+	.splice_read = generic_file_splice_read,
+	.splice_write = generic_file_splice_write,
+	.unlocked_ioctl = ceph_ioctl,
+	.compat_ioctl	= ceph_ioctl,
+};
+
diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c
new file mode 100644
index 000000000000..7abe1aed819b
--- /dev/null
+++ b/fs/ceph/inode.c
@@ -0,0 +1,1750 @@
+#include "ceph_debug.h"
+
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/smp_lock.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/uaccess.h>
+#include <linux/kernel.h>
+#include <linux/namei.h>
+#include <linux/writeback.h>
+#include <linux/vmalloc.h>
+#include <linux/pagevec.h>
+
+#include "super.h"
+#include "decode.h"
+
+/*
+ * Ceph inode operations
+ *
+ * Implement basic inode helpers (get, alloc) and inode ops (getattr,
+ * setattr, etc.), xattr helpers, and helpers for assimilating
+ * metadata returned by the MDS into our cache.
+ *
+ * Also define helpers for doing asynchronous writeback, invalidation,
+ * and truncation for the benefit of those who can't afford to block
+ * (typically because they are in the message handler path).
+ */
+
+static const struct inode_operations ceph_symlink_iops;
+
+static void ceph_invalidate_work(struct work_struct *work);
+static void ceph_writeback_work(struct work_struct *work);
+static void ceph_vmtruncate_work(struct work_struct *work);
+
+/*
+ * find or create an inode, given the ceph ino number
+ */
+struct inode *ceph_get_inode(struct super_block *sb, struct ceph_vino vino)
+{
+	struct inode *inode;
+	ino_t t = ceph_vino_to_ino(vino);
+
+	inode = iget5_locked(sb, t, ceph_ino_compare, ceph_set_ino_cb, &vino);
+	if (inode == NULL)
+		return ERR_PTR(-ENOMEM);
+	if (inode->i_state & I_NEW) {
+		dout("get_inode created new inode %p %llx.%llx ino %llx\n",
+		     inode, ceph_vinop(inode), (u64)inode->i_ino);
+		unlock_new_inode(inode);
+	}
+
+	dout("get_inode on %lu=%llx.%llx got %p\n", inode->i_ino, vino.ino,
+	     vino.snap, inode);
+	return inode;
+}
+
+/*
+ * get/constuct snapdir inode for a given directory
+ */
+struct inode *ceph_get_snapdir(struct inode *parent)
+{
+	struct ceph_vino vino = {
+		.ino = ceph_ino(parent),
+		.snap = CEPH_SNAPDIR,
+	};
+	struct inode *inode = ceph_get_inode(parent->i_sb, vino);
+	struct ceph_inode_info *ci = ceph_inode(inode);
+
+	BUG_ON(!S_ISDIR(parent->i_mode));
+	if (IS_ERR(inode))
+		return ERR_PTR(PTR_ERR(inode));
+	inode->i_mode = parent->i_mode;
+	inode->i_uid = parent->i_uid;
+	inode->i_gid = parent->i_gid;
+	inode->i_op = &ceph_dir_iops;
+	inode->i_fop = &ceph_dir_fops;
+	ci->i_snap_caps = CEPH_CAP_PIN; /* so we can open */
+	ci->i_rbytes = 0;
+	return inode;
+}
+
+const struct inode_operations ceph_file_iops = {
+	.permission = ceph_permission,
+	.setattr = ceph_setattr,
+	.getattr = ceph_getattr,
+	.setxattr = ceph_setxattr,
+	.getxattr = ceph_getxattr,
+	.listxattr = ceph_listxattr,
+	.removexattr = ceph_removexattr,
+};
+
+
+/*
+ * We use a 'frag tree' to keep track of the MDS's directory fragments
+ * for a given inode (usually there is just a single fragment).  We
+ * need to know when a child frag is delegated to a new MDS, or when
+ * it is flagged as replicated, so we can direct our requests
+ * accordingly.
+ */
+
+/*
+ * find/create a frag in the tree
+ */
+static struct ceph_inode_frag *__get_or_create_frag(struct ceph_inode_info *ci,
+						    u32 f)
+{
+	struct rb_node **p;
+	struct rb_node *parent = NULL;
+	struct ceph_inode_frag *frag;
+	int c;
+
+	p = &ci->i_fragtree.rb_node;
+	while (*p) {
+		parent = *p;
+		frag = rb_entry(parent, struct ceph_inode_frag, node);
+		c = ceph_frag_compare(f, frag->frag);
+		if (c < 0)
+			p = &(*p)->rb_left;
+		else if (c > 0)
+			p = &(*p)->rb_right;
+		else
+			return frag;
+	}
+
+	frag = kmalloc(sizeof(*frag), GFP_NOFS);
+	if (!frag) {
+		pr_err("__get_or_create_frag ENOMEM on %p %llx.%llx "
+		       "frag %x\n", &ci->vfs_inode,
+		       ceph_vinop(&ci->vfs_inode), f);
+		return ERR_PTR(-ENOMEM);
+	}
+	frag->frag = f;
+	frag->split_by = 0;
+	frag->mds = -1;
+	frag->ndist = 0;
+
+	rb_link_node(&frag->node, parent, p);
+	rb_insert_color(&frag->node, &ci->i_fragtree);
+
+	dout("get_or_create_frag added %llx.%llx frag %x\n",
+	     ceph_vinop(&ci->vfs_inode), f);
+	return frag;
+}
+
+/*
+ * find a specific frag @f
+ */
+struct ceph_inode_frag *__ceph_find_frag(struct ceph_inode_info *ci, u32 f)
+{
+	struct rb_node *n = ci->i_fragtree.rb_node;
+
+	while (n) {
+		struct ceph_inode_frag *frag =
+			rb_entry(n, struct ceph_inode_frag, node);
+		int c = ceph_frag_compare(f, frag->frag);
+		if (c < 0)
+			n = n->rb_left;
+		else if (c > 0)
+			n = n->rb_right;
+		else
+			return frag;
+	}
+	return NULL;
+}
+
+/*
+ * Choose frag containing the given value @v.  If @pfrag is
+ * specified, copy the frag delegation info to the caller if
+ * it is present.
+ */
+u32 ceph_choose_frag(struct ceph_inode_info *ci, u32 v,
+		     struct ceph_inode_frag *pfrag,
+		     int *found)
+{
+	u32 t = ceph_frag_make(0, 0);
+	struct ceph_inode_frag *frag;
+	unsigned nway, i;
+	u32 n;
+
+	if (found)
+		*found = 0;
+
+	mutex_lock(&ci->i_fragtree_mutex);
+	while (1) {
+		WARN_ON(!ceph_frag_contains_value(t, v));
+		frag = __ceph_find_frag(ci, t);
+		if (!frag)
+			break; /* t is a leaf */
+		if (frag->split_by == 0) {
+			if (pfrag)
+				memcpy(pfrag, frag, sizeof(*pfrag));
+			if (found)
+				*found = 1;
+			break;
+		}
+
+		/* choose child */
+		nway = 1 << frag->split_by;
+		dout("choose_frag(%x) %x splits by %d (%d ways)\n", v, t,
+		     frag->split_by, nway);
+		for (i = 0; i < nway; i++) {
+			n = ceph_frag_make_child(t, frag->split_by, i);
+			if (ceph_frag_contains_value(n, v)) {
+				t = n;
+				break;
+			}
+		}
+		BUG_ON(i == nway);
+	}
+	dout("choose_frag(%x) = %x\n", v, t);
+
+	mutex_unlock(&ci->i_fragtree_mutex);
+	return t;
+}
+
+/*
+ * Process dirfrag (delegation) info from the mds.  Include leaf
+ * fragment in tree ONLY if ndist > 0.  Otherwise, only
+ * branches/splits are included in i_fragtree)
+ */
+static int ceph_fill_dirfrag(struct inode *inode,
+			     struct ceph_mds_reply_dirfrag *dirinfo)
+{
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	struct ceph_inode_frag *frag;
+	u32 id = le32_to_cpu(dirinfo->frag);
+	int mds = le32_to_cpu(dirinfo->auth);
+	int ndist = le32_to_cpu(dirinfo->ndist);
+	int i;
+	int err = 0;
+
+	mutex_lock(&ci->i_fragtree_mutex);
+	if (ndist == 0) {
+		/* no delegation info needed. */
+		frag = __ceph_find_frag(ci, id);
+		if (!frag)
+			goto out;
+		if (frag->split_by == 0) {
+			/* tree leaf, remove */
+			dout("fill_dirfrag removed %llx.%llx frag %x"
+			     " (no ref)\n", ceph_vinop(inode), id);
+			rb_erase(&frag->node, &ci->i_fragtree);
+			kfree(frag);
+		} else {
+			/* tree branch, keep and clear */
+			dout("fill_dirfrag cleared %llx.%llx frag %x"
+			     " referral\n", ceph_vinop(inode), id);
+			frag->mds = -1;
+			frag->ndist = 0;
+		}
+		goto out;
+	}
+
+
+	/* find/add this frag to store mds delegation info */
+	frag = __get_or_create_frag(ci, id);
+	if (IS_ERR(frag)) {
+		/* this is not the end of the world; we can continue
+		   with bad/inaccurate delegation info */
+		pr_err("fill_dirfrag ENOMEM on mds ref %llx.%llx fg %x\n",
+		       ceph_vinop(inode), le32_to_cpu(dirinfo->frag));
+		err = -ENOMEM;
+		goto out;
+	}
+
+	frag->mds = mds;
+	frag->ndist = min_t(u32, ndist, CEPH_MAX_DIRFRAG_REP);
+	for (i = 0; i < frag->ndist; i++)
+		frag->dist[i] = le32_to_cpu(dirinfo->dist[i]);
+	dout("fill_dirfrag %llx.%llx frag %x ndist=%d\n",
+	     ceph_vinop(inode), frag->frag, frag->ndist);
+
+out:
+	mutex_unlock(&ci->i_fragtree_mutex);
+	return err;
+}
+
+
+/*
+ * initialize a newly allocated inode.
+ */
+struct inode *ceph_alloc_inode(struct super_block *sb)
+{
+	struct ceph_inode_info *ci;
+	int i;
+
+	ci = kmem_cache_alloc(ceph_inode_cachep, GFP_NOFS);
+	if (!ci)
+		return NULL;
+
+	dout("alloc_inode %p\n", &ci->vfs_inode);
+
+	ci->i_version = 0;
+	ci->i_time_warp_seq = 0;
+	ci->i_ceph_flags = 0;
+	ci->i_release_count = 0;
+	ci->i_symlink = NULL;
+
+	ci->i_fragtree = RB_ROOT;
+	mutex_init(&ci->i_fragtree_mutex);
+
+	ci->i_xattrs.blob = NULL;
+	ci->i_xattrs.prealloc_blob = NULL;
+	ci->i_xattrs.dirty = false;
+	ci->i_xattrs.index = RB_ROOT;
+	ci->i_xattrs.count = 0;
+	ci->i_xattrs.names_size = 0;
+	ci->i_xattrs.vals_size = 0;
+	ci->i_xattrs.version = 0;
+	ci->i_xattrs.index_version = 0;
+
+	ci->i_caps = RB_ROOT;
+	ci->i_auth_cap = NULL;
+	ci->i_dirty_caps = 0;
+	ci->i_flushing_caps = 0;
+	INIT_LIST_HEAD(&ci->i_dirty_item);
+	INIT_LIST_HEAD(&ci->i_flushing_item);
+	ci->i_cap_flush_seq = 0;
+	ci->i_cap_flush_last_tid = 0;
+	memset(&ci->i_cap_flush_tid, 0, sizeof(ci->i_cap_flush_tid));
+	init_waitqueue_head(&ci->i_cap_wq);
+	ci->i_hold_caps_min = 0;
+	ci->i_hold_caps_max = 0;
+	INIT_LIST_HEAD(&ci->i_cap_delay_list);
+	ci->i_cap_exporting_mds = 0;
+	ci->i_cap_exporting_mseq = 0;
+	ci->i_cap_exporting_issued = 0;
+	INIT_LIST_HEAD(&ci->i_cap_snaps);
+	ci->i_head_snapc = NULL;
+	ci->i_snap_caps = 0;
+
+	for (i = 0; i < CEPH_FILE_MODE_NUM; i++)
+		ci->i_nr_by_mode[i] = 0;
+
+	ci->i_truncate_seq = 0;
+	ci->i_truncate_size = 0;
+	ci->i_truncate_pending = 0;
+
+	ci->i_max_size = 0;
+	ci->i_reported_size = 0;
+	ci->i_wanted_max_size = 0;
+	ci->i_requested_max_size = 0;
+
+	ci->i_pin_ref = 0;
+	ci->i_rd_ref = 0;
+	ci->i_rdcache_ref = 0;
+	ci->i_wr_ref = 0;
+	ci->i_wrbuffer_ref = 0;
+	ci->i_wrbuffer_ref_head = 0;
+	ci->i_shared_gen = 0;
+	ci->i_rdcache_gen = 0;
+	ci->i_rdcache_revoking = 0;
+
+	INIT_LIST_HEAD(&ci->i_unsafe_writes);
+	INIT_LIST_HEAD(&ci->i_unsafe_dirops);
+	spin_lock_init(&ci->i_unsafe_lock);
+
+	ci->i_snap_realm = NULL;
+	INIT_LIST_HEAD(&ci->i_snap_realm_item);
+	INIT_LIST_HEAD(&ci->i_snap_flush_item);
+
+	INIT_WORK(&ci->i_wb_work, ceph_writeback_work);
+	INIT_WORK(&ci->i_pg_inv_work, ceph_invalidate_work);
+
+	INIT_WORK(&ci->i_vmtruncate_work, ceph_vmtruncate_work);
+
+	return &ci->vfs_inode;
+}
+
+void ceph_destroy_inode(struct inode *inode)
+{
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	struct ceph_inode_frag *frag;
+	struct rb_node *n;
+
+	dout("destroy_inode %p ino %llx.%llx\n", inode, ceph_vinop(inode));
+
+	ceph_queue_caps_release(inode);
+
+	kfree(ci->i_symlink);
+	while ((n = rb_first(&ci->i_fragtree)) != NULL) {
+		frag = rb_entry(n, struct ceph_inode_frag, node);
+		rb_erase(n, &ci->i_fragtree);
+		kfree(frag);
+	}
+
+	__ceph_destroy_xattrs(ci);
+	if (ci->i_xattrs.blob)
+		ceph_buffer_put(ci->i_xattrs.blob);
+	if (ci->i_xattrs.prealloc_blob)
+		ceph_buffer_put(ci->i_xattrs.prealloc_blob);
+
+	kmem_cache_free(ceph_inode_cachep, ci);
+}
+
+
+/*
+ * Helpers to fill in size, ctime, mtime, and atime.  We have to be
+ * careful because either the client or MDS may have more up to date
+ * info, depending on which capabilities are held, and whether
+ * time_warp_seq or truncate_seq have increased.  (Ordinarily, mtime
+ * and size are monotonically increasing, except when utimes() or
+ * truncate() increments the corresponding _seq values.)
+ */
+int ceph_fill_file_size(struct inode *inode, int issued,
+			u32 truncate_seq, u64 truncate_size, u64 size)
+{
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	int queue_trunc = 0;
+
+	if (ceph_seq_cmp(truncate_seq, ci->i_truncate_seq) > 0 ||
+	    (truncate_seq == ci->i_truncate_seq && size > inode->i_size)) {
+		dout("size %lld -> %llu\n", inode->i_size, size);
+		inode->i_size = size;
+		inode->i_blocks = (size + (1<<9) - 1) >> 9;
+		ci->i_reported_size = size;
+		if (truncate_seq != ci->i_truncate_seq) {
+			dout("truncate_seq %u -> %u\n",
+			     ci->i_truncate_seq, truncate_seq);
+			ci->i_truncate_seq = truncate_seq;
+			/*
+			 * If we hold relevant caps, or in the case where we're
+			 * not the only client referencing this file and we
+			 * don't hold those caps, then we need to check whether
+			 * the file is either opened or mmaped
+			 */
+			if ((issued & (CEPH_CAP_FILE_CACHE|CEPH_CAP_FILE_RD|
+				      CEPH_CAP_FILE_WR|CEPH_CAP_FILE_BUFFER|
+				      CEPH_CAP_FILE_EXCL)) ||
+			    mapping_mapped(inode->i_mapping) ||
+			    __ceph_caps_file_wanted(ci)) {
+				ci->i_truncate_pending++;
+				queue_trunc = 1;
+			}
+		}
+	}
+	if (ceph_seq_cmp(truncate_seq, ci->i_truncate_seq) >= 0 &&
+	    ci->i_truncate_size != truncate_size) {
+		dout("truncate_size %lld -> %llu\n", ci->i_truncate_size,
+		     truncate_size);
+		ci->i_truncate_size = truncate_size;
+	}
+	return queue_trunc;
+}
+
+void ceph_fill_file_time(struct inode *inode, int issued,
+			 u64 time_warp_seq, struct timespec *ctime,
+			 struct timespec *mtime, struct timespec *atime)
+{
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	int warn = 0;
+
+	if (issued & (CEPH_CAP_FILE_EXCL|
+		      CEPH_CAP_FILE_WR|
+		      CEPH_CAP_FILE_BUFFER)) {
+		if (timespec_compare(ctime, &inode->i_ctime) > 0) {
+			dout("ctime %ld.%09ld -> %ld.%09ld inc w/ cap\n",
+			     inode->i_ctime.tv_sec, inode->i_ctime.tv_nsec,
+			     ctime->tv_sec, ctime->tv_nsec);
+			inode->i_ctime = *ctime;
+		}
+		if (ceph_seq_cmp(time_warp_seq, ci->i_time_warp_seq) > 0) {
+			/* the MDS did a utimes() */
+			dout("mtime %ld.%09ld -> %ld.%09ld "
+			     "tw %d -> %d\n",
+			     inode->i_mtime.tv_sec, inode->i_mtime.tv_nsec,
+			     mtime->tv_sec, mtime->tv_nsec,
+			     ci->i_time_warp_seq, (int)time_warp_seq);
+
+			inode->i_mtime = *mtime;
+			inode->i_atime = *atime;
+			ci->i_time_warp_seq = time_warp_seq;
+		} else if (time_warp_seq == ci->i_time_warp_seq) {
+			/* nobody did utimes(); take the max */
+			if (timespec_compare(mtime, &inode->i_mtime) > 0) {
+				dout("mtime %ld.%09ld -> %ld.%09ld inc\n",
+				     inode->i_mtime.tv_sec,
+				     inode->i_mtime.tv_nsec,
+				     mtime->tv_sec, mtime->tv_nsec);
+				inode->i_mtime = *mtime;
+			}
+			if (timespec_compare(atime, &inode->i_atime) > 0) {
+				dout("atime %ld.%09ld -> %ld.%09ld inc\n",
+				     inode->i_atime.tv_sec,
+				     inode->i_atime.tv_nsec,
+				     atime->tv_sec, atime->tv_nsec);
+				inode->i_atime = *atime;
+			}
+		} else if (issued & CEPH_CAP_FILE_EXCL) {
+			/* we did a utimes(); ignore mds values */
+		} else {
+			warn = 1;
+		}
+	} else {
+		/* we have no write caps; whatever the MDS says is true */
+		if (ceph_seq_cmp(time_warp_seq, ci->i_time_warp_seq) >= 0) {
+			inode->i_ctime = *ctime;
+			inode->i_mtime = *mtime;
+			inode->i_atime = *atime;
+			ci->i_time_warp_seq = time_warp_seq;
+		} else {
+			warn = 1;
+		}
+	}
+	if (warn) /* time_warp_seq shouldn't go backwards */
+		dout("%p mds time_warp_seq %llu < %u\n",
+		     inode, time_warp_seq, ci->i_time_warp_seq);
+}
+
+/*
+ * Populate an inode based on info from mds.  May be called on new or
+ * existing inodes.
+ */
+static int fill_inode(struct inode *inode,
+		      struct ceph_mds_reply_info_in *iinfo,
+		      struct ceph_mds_reply_dirfrag *dirinfo,
+		      struct ceph_mds_session *session,
+		      unsigned long ttl_from, int cap_fmode,
+		      struct ceph_cap_reservation *caps_reservation)
+{
+	struct ceph_mds_reply_inode *info = iinfo->in;
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	int i;
+	int issued, implemented;
+	struct timespec mtime, atime, ctime;
+	u32 nsplits;
+	struct ceph_buffer *xattr_blob = NULL;
+	int err = 0;
+	int queue_trunc = 0;
+
+	dout("fill_inode %p ino %llx.%llx v %llu had %llu\n",
+	     inode, ceph_vinop(inode), le64_to_cpu(info->version),
+	     ci->i_version);
+
+	/*
+	 * prealloc xattr data, if it looks like we'll need it.  only
+	 * if len > 4 (meaning there are actually xattrs; the first 4
+	 * bytes are the xattr count).
+	 */
+	if (iinfo->xattr_len > 4) {
+		xattr_blob = ceph_buffer_new(iinfo->xattr_len, GFP_NOFS);
+		if (!xattr_blob)
+			pr_err("fill_inode ENOMEM xattr blob %d bytes\n",
+			       iinfo->xattr_len);
+	}
+
+	spin_lock(&inode->i_lock);
+
+	/*
+	 * provided version will be odd if inode value is projected,
+	 * even if stable.  skip the update if we have a newer info
+	 * (e.g., due to inode info racing form multiple MDSs), or if
+	 * we are getting projected (unstable) inode info.
+	 */
+	if (le64_to_cpu(info->version) > 0 &&
+	    (ci->i_version & ~1) > le64_to_cpu(info->version))
+		goto no_change;
+
+	issued = __ceph_caps_issued(ci, &implemented);
+	issued |= implemented | __ceph_caps_dirty(ci);
+
+	/* update inode */
+	ci->i_version = le64_to_cpu(info->version);
+	inode->i_version++;
+	inode->i_rdev = le32_to_cpu(info->rdev);
+
+	if ((issued & CEPH_CAP_AUTH_EXCL) == 0) {
+		inode->i_mode = le32_to_cpu(info->mode);
+		inode->i_uid = le32_to_cpu(info->uid);
+		inode->i_gid = le32_to_cpu(info->gid);
+		dout("%p mode 0%o uid.gid %d.%d\n", inode, inode->i_mode,
+		     inode->i_uid, inode->i_gid);
+	}
+
+	if ((issued & CEPH_CAP_LINK_EXCL) == 0)
+		inode->i_nlink = le32_to_cpu(info->nlink);
+
+	/* be careful with mtime, atime, size */
+	ceph_decode_timespec(&atime, &info->atime);
+	ceph_decode_timespec(&mtime, &info->mtime);
+	ceph_decode_timespec(&ctime, &info->ctime);
+	queue_trunc = ceph_fill_file_size(inode, issued,
+					  le32_to_cpu(info->truncate_seq),
+					  le64_to_cpu(info->truncate_size),
+					  le64_to_cpu(info->size));
+	ceph_fill_file_time(inode, issued,
+			    le32_to_cpu(info->time_warp_seq),
+			    &ctime, &mtime, &atime);
+
+	ci->i_max_size = le64_to_cpu(info->max_size);
+	ci->i_layout = info->layout;
+	inode->i_blkbits = fls(le32_to_cpu(info->layout.fl_stripe_unit)) - 1;
+
+	/* xattrs */
+	/* note that if i_xattrs.len <= 4, i_xattrs.data will still be NULL. */
+	if ((issued & CEPH_CAP_XATTR_EXCL) == 0 &&
+	    le64_to_cpu(info->xattr_version) > ci->i_xattrs.version) {
+		if (ci->i_xattrs.blob)
+			ceph_buffer_put(ci->i_xattrs.blob);
+		ci->i_xattrs.blob = xattr_blob;
+		if (xattr_blob)
+			memcpy(ci->i_xattrs.blob->vec.iov_base,
+			       iinfo->xattr_data, iinfo->xattr_len);
+		ci->i_xattrs.version = le64_to_cpu(info->xattr_version);
+	}
+
+	inode->i_mapping->a_ops = &ceph_aops;
+	inode->i_mapping->backing_dev_info =
+		&ceph_client(inode->i_sb)->backing_dev_info;
+
+	switch (inode->i_mode & S_IFMT) {
+	case S_IFIFO:
+	case S_IFBLK:
+	case S_IFCHR:
+	case S_IFSOCK:
+		init_special_inode(inode, inode->i_mode, inode->i_rdev);
+		inode->i_op = &ceph_file_iops;
+		break;
+	case S_IFREG:
+		inode->i_op = &ceph_file_iops;
+		inode->i_fop = &ceph_file_fops;
+		break;
+	case S_IFLNK:
+		inode->i_op = &ceph_symlink_iops;
+		if (!ci->i_symlink) {
+			int symlen = iinfo->symlink_len;
+			char *sym;
+
+			BUG_ON(symlen != inode->i_size);
+			spin_unlock(&inode->i_lock);
+
+			err = -ENOMEM;
+			sym = kmalloc(symlen+1, GFP_NOFS);
+			if (!sym)
+				goto out;
+			memcpy(sym, iinfo->symlink, symlen);
+			sym[symlen] = 0;
+
+			spin_lock(&inode->i_lock);
+			if (!ci->i_symlink)
+				ci->i_symlink = sym;
+			else
+				kfree(sym); /* lost a race */
+		}
+		break;
+	case S_IFDIR:
+		inode->i_op = &ceph_dir_iops;
+		inode->i_fop = &ceph_dir_fops;
+
+		ci->i_files = le64_to_cpu(info->files);
+		ci->i_subdirs = le64_to_cpu(info->subdirs);
+		ci->i_rbytes = le64_to_cpu(info->rbytes);
+		ci->i_rfiles = le64_to_cpu(info->rfiles);
+		ci->i_rsubdirs = le64_to_cpu(info->rsubdirs);
+		ceph_decode_timespec(&ci->i_rctime, &info->rctime);
+
+		/* set dir completion flag? */
+		if (ci->i_files == 0 && ci->i_subdirs == 0 &&
+		    ceph_snap(inode) == CEPH_NOSNAP &&
+		    (le32_to_cpu(info->cap.caps) & CEPH_CAP_FILE_SHARED)) {
+			dout(" marking %p complete (empty)\n", inode);
+			ci->i_ceph_flags |= CEPH_I_COMPLETE;
+			ci->i_max_offset = 2;
+		}
+
+		/* it may be better to set st_size in getattr instead? */
+		if (ceph_test_opt(ceph_client(inode->i_sb), RBYTES))
+			inode->i_size = ci->i_rbytes;
+		break;
+	default:
+		pr_err("fill_inode %llx.%llx BAD mode 0%o\n",
+		       ceph_vinop(inode), inode->i_mode);
+	}
+
+no_change:
+	spin_unlock(&inode->i_lock);
+
+	/* queue truncate if we saw i_size decrease */
+	if (queue_trunc)
+		ceph_queue_vmtruncate(inode);
+
+	/* populate frag tree */
+	/* FIXME: move me up, if/when version reflects fragtree changes */
+	nsplits = le32_to_cpu(info->fragtree.nsplits);
+	mutex_lock(&ci->i_fragtree_mutex);
+	for (i = 0; i < nsplits; i++) {
+		u32 id = le32_to_cpu(info->fragtree.splits[i].frag);
+		struct ceph_inode_frag *frag = __get_or_create_frag(ci, id);
+
+		if (IS_ERR(frag))
+			continue;
+		frag->split_by = le32_to_cpu(info->fragtree.splits[i].by);
+		dout(" frag %x split by %d\n", frag->frag, frag->split_by);
+	}
+	mutex_unlock(&ci->i_fragtree_mutex);
+
+	/* were we issued a capability? */
+	if (info->cap.caps) {
+		if (ceph_snap(inode) == CEPH_NOSNAP) {
+			ceph_add_cap(inode, session,
+				     le64_to_cpu(info->cap.cap_id),
+				     cap_fmode,
+				     le32_to_cpu(info->cap.caps),
+				     le32_to_cpu(info->cap.wanted),
+				     le32_to_cpu(info->cap.seq),
+				     le32_to_cpu(info->cap.mseq),
+				     le64_to_cpu(info->cap.realm),
+				     info->cap.flags,
+				     caps_reservation);
+		} else {
+			spin_lock(&inode->i_lock);
+			dout(" %p got snap_caps %s\n", inode,
+			     ceph_cap_string(le32_to_cpu(info->cap.caps)));
+			ci->i_snap_caps |= le32_to_cpu(info->cap.caps);
+			if (cap_fmode >= 0)
+				__ceph_get_fmode(ci, cap_fmode);
+			spin_unlock(&inode->i_lock);
+		}
+	}
+
+	/* update delegation info? */
+	if (dirinfo)
+		ceph_fill_dirfrag(inode, dirinfo);
+
+	err = 0;
+
+out:
+	if (xattr_blob)
+		ceph_buffer_put(xattr_blob);
+	return err;
+}
+
+/*
+ * caller should hold session s_mutex.
+ */
+static void update_dentry_lease(struct dentry *dentry,
+				struct ceph_mds_reply_lease *lease,
+				struct ceph_mds_session *session,
+				unsigned long from_time)
+{
+	struct ceph_dentry_info *di = ceph_dentry(dentry);
+	long unsigned duration = le32_to_cpu(lease->duration_ms);
+	long unsigned ttl = from_time + (duration * HZ) / 1000;
+	long unsigned half_ttl = from_time + (duration * HZ / 2) / 1000;
+	struct inode *dir;
+
+	/* only track leases on regular dentries */
+	if (dentry->d_op != &ceph_dentry_ops)
+		return;
+
+	spin_lock(&dentry->d_lock);
+	dout("update_dentry_lease %p mask %d duration %lu ms ttl %lu\n",
+	     dentry, le16_to_cpu(lease->mask), duration, ttl);
+
+	/* make lease_rdcache_gen match directory */
+	dir = dentry->d_parent->d_inode;
+	di->lease_shared_gen = ceph_inode(dir)->i_shared_gen;
+
+	if (lease->mask == 0)
+		goto out_unlock;
+
+	if (di->lease_gen == session->s_cap_gen &&
+	    time_before(ttl, dentry->d_time))
+		goto out_unlock;  /* we already have a newer lease. */
+
+	if (di->lease_session && di->lease_session != session)
+		goto out_unlock;
+
+	ceph_dentry_lru_touch(dentry);
+
+	if (!di->lease_session)
+		di->lease_session = ceph_get_mds_session(session);
+	di->lease_gen = session->s_cap_gen;
+	di->lease_seq = le32_to_cpu(lease->seq);
+	di->lease_renew_after = half_ttl;
+	di->lease_renew_from = 0;
+	dentry->d_time = ttl;
+out_unlock:
+	spin_unlock(&dentry->d_lock);
+	return;
+}
+
+/*
+ * splice a dentry to an inode.
+ * caller must hold directory i_mutex for this to be safe.
+ *
+ * we will only rehash the resulting dentry if @prehash is
+ * true; @prehash will be set to false (for the benefit of
+ * the caller) if we fail.
+ */
+static struct dentry *splice_dentry(struct dentry *dn, struct inode *in,
+				    bool *prehash)
+{
+	struct dentry *realdn;
+
+	/* dn must be unhashed */
+	if (!d_unhashed(dn))
+		d_drop(dn);
+	realdn = d_materialise_unique(dn, in);
+	if (IS_ERR(realdn)) {
+		pr_err("splice_dentry error %p inode %p ino %llx.%llx\n",
+		       dn, in, ceph_vinop(in));
+		if (prehash)
+			*prehash = false; /* don't rehash on error */
+		dn = realdn; /* note realdn contains the error */
+		goto out;
+	} else if (realdn) {
+		dout("dn %p (%d) spliced with %p (%d) "
+		     "inode %p ino %llx.%llx\n",
+		     dn, atomic_read(&dn->d_count),
+		     realdn, atomic_read(&realdn->d_count),
+		     realdn->d_inode, ceph_vinop(realdn->d_inode));
+		dput(dn);
+		dn = realdn;
+	} else {
+		BUG_ON(!ceph_dentry(dn));
+
+		dout("dn %p attached to %p ino %llx.%llx\n",
+		     dn, dn->d_inode, ceph_vinop(dn->d_inode));
+	}
+	if ((!prehash || *prehash) && d_unhashed(dn))
+		d_rehash(dn);
+out:
+	return dn;
+}
+
+/*
+ * Set dentry's directory position based on the current dir's max, and
+ * order it in d_subdirs, so that dcache_readdir behaves.
+ */
+static void ceph_set_dentry_offset(struct dentry *dn)
+{
+	struct dentry *dir = dn->d_parent;
+	struct inode *inode = dn->d_parent->d_inode;
+	struct ceph_dentry_info *di;
+
+	BUG_ON(!inode);
+
+	di = ceph_dentry(dn);
+
+	spin_lock(&inode->i_lock);
+	di->offset = ceph_inode(inode)->i_max_offset++;
+	spin_unlock(&inode->i_lock);
+
+	spin_lock(&dcache_lock);
+	spin_lock(&dn->d_lock);
+	list_move_tail(&dir->d_subdirs, &dn->d_u.d_child);
+	dout("set_dentry_offset %p %lld (%p %p)\n", dn, di->offset,
+	     dn->d_u.d_child.prev, dn->d_u.d_child.next);
+	spin_unlock(&dn->d_lock);
+	spin_unlock(&dcache_lock);
+}
+
+/*
+ * Incorporate results into the local cache.  This is either just
+ * one inode, or a directory, dentry, and possibly linked-to inode (e.g.,
+ * after a lookup).
+ *
+ * A reply may contain
+ *         a directory inode along with a dentry.
+ *  and/or a target inode
+ *
+ * Called with snap_rwsem (read).
+ */
+int ceph_fill_trace(struct super_block *sb, struct ceph_mds_request *req,
+		    struct ceph_mds_session *session)
+{
+	struct ceph_mds_reply_info_parsed *rinfo = &req->r_reply_info;
+	struct inode *in = NULL;
+	struct ceph_mds_reply_inode *ininfo;
+	struct ceph_vino vino;
+	int i = 0;
+	int err = 0;
+
+	dout("fill_trace %p is_dentry %d is_target %d\n", req,
+	     rinfo->head->is_dentry, rinfo->head->is_target);
+
+#if 0
+	/*
+	 * Debugging hook:
+	 *
+	 * If we resend completed ops to a recovering mds, we get no
+	 * trace.  Since that is very rare, pretend this is the case
+	 * to ensure the 'no trace' handlers in the callers behave.
+	 *
+	 * Fill in inodes unconditionally to avoid breaking cap
+	 * invariants.
+	 */
+	if (rinfo->head->op & CEPH_MDS_OP_WRITE) {
+		pr_info("fill_trace faking empty trace on %lld %s\n",
+			req->r_tid, ceph_mds_op_name(rinfo->head->op));
+		if (rinfo->head->is_dentry) {
+			rinfo->head->is_dentry = 0;
+			err = fill_inode(req->r_locked_dir,
+					 &rinfo->diri, rinfo->dirfrag,
+					 session, req->r_request_started, -1);
+		}
+		if (rinfo->head->is_target) {
+			rinfo->head->is_target = 0;
+			ininfo = rinfo->targeti.in;
+			vino.ino = le64_to_cpu(ininfo->ino);
+			vino.snap = le64_to_cpu(ininfo->snapid);
+			in = ceph_get_inode(sb, vino);
+			err = fill_inode(in, &rinfo->targeti, NULL,
+					 session, req->r_request_started,
+					 req->r_fmode);
+			iput(in);
+		}
+	}
+#endif
+
+	if (!rinfo->head->is_target && !rinfo->head->is_dentry) {
+		dout("fill_trace reply is empty!\n");
+		if (rinfo->head->result == 0 && req->r_locked_dir) {
+			struct ceph_inode_info *ci =
+				ceph_inode(req->r_locked_dir);
+			dout(" clearing %p complete (empty trace)\n",
+			     req->r_locked_dir);
+			ci->i_ceph_flags &= ~CEPH_I_COMPLETE;
+			ci->i_release_count++;
+		}
+		return 0;
+	}
+
+	if (rinfo->head->is_dentry) {
+		struct inode *dir = req->r_locked_dir;
+
+		err = fill_inode(dir, &rinfo->diri, rinfo->dirfrag,
+				 session, req->r_request_started, -1,
+				 &req->r_caps_reservation);
+		if (err < 0)
+			return err;
+	}
+
+	if (rinfo->head->is_dentry && !req->r_aborted) {
+		/*
+		 * lookup link rename   : null -> possibly existing inode
+		 * mknod symlink mkdir  : null -> new inode
+		 * unlink               : linked -> null
+		 */
+		struct inode *dir = req->r_locked_dir;
+		struct dentry *dn = req->r_dentry;
+		bool have_dir_cap, have_lease;
+
+		BUG_ON(!dn);
+		BUG_ON(!dir);
+		BUG_ON(dn->d_parent->d_inode != dir);
+		BUG_ON(ceph_ino(dir) !=
+		       le64_to_cpu(rinfo->diri.in->ino));
+		BUG_ON(ceph_snap(dir) !=
+		       le64_to_cpu(rinfo->diri.in->snapid));
+
+		/* do we have a lease on the whole dir? */
+		have_dir_cap =
+			(le32_to_cpu(rinfo->diri.in->cap.caps) &
+			 CEPH_CAP_FILE_SHARED);
+
+		/* do we have a dn lease? */
+		have_lease = have_dir_cap ||
+			(le16_to_cpu(rinfo->dlease->mask) &
+			 CEPH_LOCK_DN);
+
+		if (!have_lease)
+			dout("fill_trace  no dentry lease or dir cap\n");
+
+		/* rename? */
+		if (req->r_old_dentry && req->r_op == CEPH_MDS_OP_RENAME) {
+			dout(" src %p '%.*s' dst %p '%.*s'\n",
+			     req->r_old_dentry,
+			     req->r_old_dentry->d_name.len,
+			     req->r_old_dentry->d_name.name,
+			     dn, dn->d_name.len, dn->d_name.name);
+			dout("fill_trace doing d_move %p -> %p\n",
+			     req->r_old_dentry, dn);
+			d_move(req->r_old_dentry, dn);
+			dout(" src %p '%.*s' dst %p '%.*s'\n",
+			     req->r_old_dentry,
+			     req->r_old_dentry->d_name.len,
+			     req->r_old_dentry->d_name.name,
+			     dn, dn->d_name.len, dn->d_name.name);
+			/* ensure target dentry is invalidated, despite
+			   rehashing bug in vfs_rename_dir */
+			dn->d_time = jiffies;
+			ceph_dentry(dn)->lease_shared_gen = 0;
+			/* take overwritten dentry's readdir offset */
+			ceph_dentry(req->r_old_dentry)->offset =
+				ceph_dentry(dn)->offset;
+			dn = req->r_old_dentry;  /* use old_dentry */
+			in = dn->d_inode;
+		}
+
+		/* null dentry? */
+		if (!rinfo->head->is_target) {
+			dout("fill_trace null dentry\n");
+			if (dn->d_inode) {
+				dout("d_delete %p\n", dn);
+				d_delete(dn);
+			} else {
+				dout("d_instantiate %p NULL\n", dn);
+				d_instantiate(dn, NULL);
+				if (have_lease && d_unhashed(dn))
+					d_rehash(dn);
+				update_dentry_lease(dn, rinfo->dlease,
+						    session,
+						    req->r_request_started);
+			}
+			goto done;
+		}
+
+		/* attach proper inode */
+		ininfo = rinfo->targeti.in;
+		vino.ino = le64_to_cpu(ininfo->ino);
+		vino.snap = le64_to_cpu(ininfo->snapid);
+		if (!dn->d_inode) {
+			in = ceph_get_inode(sb, vino);
+			if (IS_ERR(in)) {
+				pr_err("fill_trace bad get_inode "
+				       "%llx.%llx\n", vino.ino, vino.snap);
+				err = PTR_ERR(in);
+				d_delete(dn);
+				goto done;
+			}
+			dn = splice_dentry(dn, in, &have_lease);
+			if (IS_ERR(dn)) {
+				err = PTR_ERR(dn);
+				goto done;
+			}
+			req->r_dentry = dn;  /* may have spliced */
+			ceph_set_dentry_offset(dn);
+			igrab(in);
+		} else if (ceph_ino(in) == vino.ino &&
+			   ceph_snap(in) == vino.snap) {
+			igrab(in);
+		} else {
+			dout(" %p links to %p %llx.%llx, not %llx.%llx\n",
+			     dn, in, ceph_ino(in), ceph_snap(in),
+			     vino.ino, vino.snap);
+			have_lease = false;
+			in = NULL;
+		}
+
+		if (have_lease)
+			update_dentry_lease(dn, rinfo->dlease, session,
+					    req->r_request_started);
+		dout(" final dn %p\n", dn);
+		i++;
+	} else if (req->r_op == CEPH_MDS_OP_LOOKUPSNAP ||
+		   req->r_op == CEPH_MDS_OP_MKSNAP) {
+		struct dentry *dn = req->r_dentry;
+
+		/* fill out a snapdir LOOKUPSNAP dentry */
+		BUG_ON(!dn);
+		BUG_ON(!req->r_locked_dir);
+		BUG_ON(ceph_snap(req->r_locked_dir) != CEPH_SNAPDIR);
+		ininfo = rinfo->targeti.in;
+		vino.ino = le64_to_cpu(ininfo->ino);
+		vino.snap = le64_to_cpu(ininfo->snapid);
+		in = ceph_get_inode(sb, vino);
+		if (IS_ERR(in)) {
+			pr_err("fill_inode get_inode badness %llx.%llx\n",
+			       vino.ino, vino.snap);
+			err = PTR_ERR(in);
+			d_delete(dn);
+			goto done;
+		}
+		dout(" linking snapped dir %p to dn %p\n", in, dn);
+		dn = splice_dentry(dn, in, NULL);
+		if (IS_ERR(dn)) {
+			err = PTR_ERR(dn);
+			goto done;
+		}
+		ceph_set_dentry_offset(dn);
+		req->r_dentry = dn;  /* may have spliced */
+		igrab(in);
+		rinfo->head->is_dentry = 1;  /* fool notrace handlers */
+	}
+
+	if (rinfo->head->is_target) {
+		vino.ino = le64_to_cpu(rinfo->targeti.in->ino);
+		vino.snap = le64_to_cpu(rinfo->targeti.in->snapid);
+
+		if (in == NULL || ceph_ino(in) != vino.ino ||
+		    ceph_snap(in) != vino.snap) {
+			in = ceph_get_inode(sb, vino);
+			if (IS_ERR(in)) {
+				err = PTR_ERR(in);
+				goto done;
+			}
+		}
+		req->r_target_inode = in;
+
+		err = fill_inode(in,
+				 &rinfo->targeti, NULL,
+				 session, req->r_request_started,
+				 (le32_to_cpu(rinfo->head->result) == 0) ?
+				 req->r_fmode : -1,
+				 &req->r_caps_reservation);
+		if (err < 0) {
+			pr_err("fill_inode badness %p %llx.%llx\n",
+			       in, ceph_vinop(in));
+			goto done;
+		}
+	}
+
+done:
+	dout("fill_trace done err=%d\n", err);
+	return err;
+}
+
+/*
+ * Prepopulate our cache with readdir results, leases, etc.
+ */
+int ceph_readdir_prepopulate(struct ceph_mds_request *req,
+			     struct ceph_mds_session *session)
+{
+	struct dentry *parent = req->r_dentry;
+	struct ceph_mds_reply_info_parsed *rinfo = &req->r_reply_info;
+	struct qstr dname;
+	struct dentry *dn;
+	struct inode *in;
+	int err = 0, i;
+	struct inode *snapdir = NULL;
+	struct ceph_mds_request_head *rhead = req->r_request->front.iov_base;
+	u64 frag = le32_to_cpu(rhead->args.readdir.frag);
+	struct ceph_dentry_info *di;
+
+	if (le32_to_cpu(rinfo->head->op) == CEPH_MDS_OP_LSSNAP) {
+		snapdir = ceph_get_snapdir(parent->d_inode);
+		parent = d_find_alias(snapdir);
+		dout("readdir_prepopulate %d items under SNAPDIR dn %p\n",
+		     rinfo->dir_nr, parent);
+	} else {
+		dout("readdir_prepopulate %d items under dn %p\n",
+		     rinfo->dir_nr, parent);
+		if (rinfo->dir_dir)
+			ceph_fill_dirfrag(parent->d_inode, rinfo->dir_dir);
+	}
+
+	for (i = 0; i < rinfo->dir_nr; i++) {
+		struct ceph_vino vino;
+
+		dname.name = rinfo->dir_dname[i];
+		dname.len = rinfo->dir_dname_len[i];
+		dname.hash = full_name_hash(dname.name, dname.len);
+
+		vino.ino = le64_to_cpu(rinfo->dir_in[i].in->ino);
+		vino.snap = le64_to_cpu(rinfo->dir_in[i].in->snapid);
+
+retry_lookup:
+		dn = d_lookup(parent, &dname);
+		dout("d_lookup on parent=%p name=%.*s got %p\n",
+		     parent, dname.len, dname.name, dn);
+
+		if (!dn) {
+			dn = d_alloc(parent, &dname);
+			dout("d_alloc %p '%.*s' = %p\n", parent,
+			     dname.len, dname.name, dn);
+			if (dn == NULL) {
+				dout("d_alloc badness\n");
+				err = -ENOMEM;
+				goto out;
+			}
+			err = ceph_init_dentry(dn);
+			if (err < 0)
+				goto out;
+		} else if (dn->d_inode &&
+			   (ceph_ino(dn->d_inode) != vino.ino ||
+			    ceph_snap(dn->d_inode) != vino.snap)) {
+			dout(" dn %p points to wrong inode %p\n",
+			     dn, dn->d_inode);
+			d_delete(dn);
+			dput(dn);
+			goto retry_lookup;
+		} else {
+			/* reorder parent's d_subdirs */
+			spin_lock(&dcache_lock);
+			spin_lock(&dn->d_lock);
+			list_move(&dn->d_u.d_child, &parent->d_subdirs);
+			spin_unlock(&dn->d_lock);
+			spin_unlock(&dcache_lock);
+		}
+
+		di = dn->d_fsdata;
+		di->offset = ceph_make_fpos(frag, i + req->r_readdir_offset);
+
+		/* inode */
+		if (dn->d_inode) {
+			in = dn->d_inode;
+		} else {
+			in = ceph_get_inode(parent->d_sb, vino);
+			if (in == NULL) {
+				dout("new_inode badness\n");
+				d_delete(dn);
+				dput(dn);
+				err = -ENOMEM;
+				goto out;
+			}
+			dn = splice_dentry(dn, in, NULL);
+		}
+
+		if (fill_inode(in, &rinfo->dir_in[i], NULL, session,
+			       req->r_request_started, -1,
+			       &req->r_caps_reservation) < 0) {
+			pr_err("fill_inode badness on %p\n", in);
+			dput(dn);
+			continue;
+		}
+		update_dentry_lease(dn, rinfo->dir_dlease[i],
+				    req->r_session, req->r_request_started);
+		dput(dn);
+	}
+	req->r_did_prepopulate = true;
+
+out:
+	if (snapdir) {
+		iput(snapdir);
+		dput(parent);
+	}
+	dout("readdir_prepopulate done\n");
+	return err;
+}
+
+int ceph_inode_set_size(struct inode *inode, loff_t size)
+{
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	int ret = 0;
+
+	spin_lock(&inode->i_lock);
+	dout("set_size %p %llu -> %llu\n", inode, inode->i_size, size);
+	inode->i_size = size;
+	inode->i_blocks = (size + (1 << 9) - 1) >> 9;
+
+	/* tell the MDS if we are approaching max_size */
+	if ((size << 1) >= ci->i_max_size &&
+	    (ci->i_reported_size << 1) < ci->i_max_size)
+		ret = 1;
+
+	spin_unlock(&inode->i_lock);
+	return ret;
+}
+
+/*
+ * Write back inode data in a worker thread.  (This can't be done
+ * in the message handler context.)
+ */
+void ceph_queue_writeback(struct inode *inode)
+{
+	if (queue_work(ceph_inode_to_client(inode)->wb_wq,
+		       &ceph_inode(inode)->i_wb_work)) {
+		dout("ceph_queue_writeback %p\n", inode);
+		igrab(inode);
+	} else {
+		dout("ceph_queue_writeback %p failed\n", inode);
+	}
+}
+
+static void ceph_writeback_work(struct work_struct *work)
+{
+	struct ceph_inode_info *ci = container_of(work, struct ceph_inode_info,
+						  i_wb_work);
+	struct inode *inode = &ci->vfs_inode;
+
+	dout("writeback %p\n", inode);
+	filemap_fdatawrite(&inode->i_data);
+	iput(inode);
+}
+
+/*
+ * queue an async invalidation
+ */
+void ceph_queue_invalidate(struct inode *inode)
+{
+	if (queue_work(ceph_inode_to_client(inode)->pg_inv_wq,
+		       &ceph_inode(inode)->i_pg_inv_work)) {
+		dout("ceph_queue_invalidate %p\n", inode);
+		igrab(inode);
+	} else {
+		dout("ceph_queue_invalidate %p failed\n", inode);
+	}
+}
+
+/*
+ * invalidate any pages that are not dirty or under writeback.  this
+ * includes pages that are clean and mapped.
+ */
+static void ceph_invalidate_nondirty_pages(struct address_space *mapping)
+{
+	struct pagevec pvec;
+	pgoff_t next = 0;
+	int i;
+
+	pagevec_init(&pvec, 0);
+	while (pagevec_lookup(&pvec, mapping, next, PAGEVEC_SIZE)) {
+		for (i = 0; i < pagevec_count(&pvec); i++) {
+			struct page *page = pvec.pages[i];
+			pgoff_t index;
+			int skip_page =
+				(PageDirty(page) || PageWriteback(page));
+
+			if (!skip_page)
+				skip_page = !trylock_page(page);
+
+			/*
+			 * We really shouldn't be looking at the ->index of an
+			 * unlocked page.  But we're not allowed to lock these
+			 * pages.  So we rely upon nobody altering the ->index
+			 * of this (pinned-by-us) page.
+			 */
+			index = page->index;
+			if (index > next)
+				next = index;
+			next++;
+
+			if (skip_page)
+				continue;
+
+			generic_error_remove_page(mapping, page);
+			unlock_page(page);
+		}
+		pagevec_release(&pvec);
+		cond_resched();
+	}
+}
+
+/*
+ * Invalidate inode pages in a worker thread.  (This can't be done
+ * in the message handler context.)
+ */
+static void ceph_invalidate_work(struct work_struct *work)
+{
+	struct ceph_inode_info *ci = container_of(work, struct ceph_inode_info,
+						  i_pg_inv_work);
+	struct inode *inode = &ci->vfs_inode;
+	u32 orig_gen;
+	int check = 0;
+
+	spin_lock(&inode->i_lock);
+	dout("invalidate_pages %p gen %d revoking %d\n", inode,
+	     ci->i_rdcache_gen, ci->i_rdcache_revoking);
+	if (ci->i_rdcache_gen == 0 ||
+	    ci->i_rdcache_revoking != ci->i_rdcache_gen) {
+		BUG_ON(ci->i_rdcache_revoking > ci->i_rdcache_gen);
+		/* nevermind! */
+		ci->i_rdcache_revoking = 0;
+		spin_unlock(&inode->i_lock);
+		goto out;
+	}
+	orig_gen = ci->i_rdcache_gen;
+	spin_unlock(&inode->i_lock);
+
+	ceph_invalidate_nondirty_pages(inode->i_mapping);
+
+	spin_lock(&inode->i_lock);
+	if (orig_gen == ci->i_rdcache_gen) {
+		dout("invalidate_pages %p gen %d successful\n", inode,
+		     ci->i_rdcache_gen);
+		ci->i_rdcache_gen = 0;
+		ci->i_rdcache_revoking = 0;
+		check = 1;
+	} else {
+		dout("invalidate_pages %p gen %d raced, gen now %d\n",
+		     inode, orig_gen, ci->i_rdcache_gen);
+	}
+	spin_unlock(&inode->i_lock);
+
+	if (check)
+		ceph_check_caps(ci, 0, NULL);
+out:
+	iput(inode);
+}
+
+
+/*
+ * called by trunc_wq; take i_mutex ourselves
+ *
+ * We also truncate in a separate thread as well.
+ */
+static void ceph_vmtruncate_work(struct work_struct *work)
+{
+	struct ceph_inode_info *ci = container_of(work, struct ceph_inode_info,
+						  i_vmtruncate_work);
+	struct inode *inode = &ci->vfs_inode;
+
+	dout("vmtruncate_work %p\n", inode);
+	mutex_lock(&inode->i_mutex);
+	__ceph_do_pending_vmtruncate(inode);
+	mutex_unlock(&inode->i_mutex);
+	iput(inode);
+}
+
+/*
+ * Queue an async vmtruncate.  If we fail to queue work, we will handle
+ * the truncation the next time we call __ceph_do_pending_vmtruncate.
+ */
+void ceph_queue_vmtruncate(struct inode *inode)
+{
+	struct ceph_inode_info *ci = ceph_inode(inode);
+
+	if (queue_work(ceph_client(inode->i_sb)->trunc_wq,
+		       &ci->i_vmtruncate_work)) {
+		dout("ceph_queue_vmtruncate %p\n", inode);
+		igrab(inode);
+	} else {
+		dout("ceph_queue_vmtruncate %p failed, pending=%d\n",
+		     inode, ci->i_truncate_pending);
+	}
+}
+
+/*
+ * called with i_mutex held.
+ *
+ * Make sure any pending truncation is applied before doing anything
+ * that may depend on it.
+ */
+void __ceph_do_pending_vmtruncate(struct inode *inode)
+{
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	u64 to;
+	int wrbuffer_refs, wake = 0;
+
+retry:
+	spin_lock(&inode->i_lock);
+	if (ci->i_truncate_pending == 0) {
+		dout("__do_pending_vmtruncate %p none pending\n", inode);
+		spin_unlock(&inode->i_lock);
+		return;
+	}
+
+	/*
+	 * make sure any dirty snapped pages are flushed before we
+	 * possibly truncate them.. so write AND block!
+	 */
+	if (ci->i_wrbuffer_ref_head < ci->i_wrbuffer_ref) {
+		dout("__do_pending_vmtruncate %p flushing snaps first\n",
+		     inode);
+		spin_unlock(&inode->i_lock);
+		filemap_write_and_wait_range(&inode->i_data, 0,
+					     inode->i_sb->s_maxbytes);
+		goto retry;
+	}
+
+	to = ci->i_truncate_size;
+	wrbuffer_refs = ci->i_wrbuffer_ref;
+	dout("__do_pending_vmtruncate %p (%d) to %lld\n", inode,
+	     ci->i_truncate_pending, to);
+	spin_unlock(&inode->i_lock);
+
+	truncate_inode_pages(inode->i_mapping, to);
+
+	spin_lock(&inode->i_lock);
+	ci->i_truncate_pending--;
+	if (ci->i_truncate_pending == 0)
+		wake = 1;
+	spin_unlock(&inode->i_lock);
+
+	if (wrbuffer_refs == 0)
+		ceph_check_caps(ci, CHECK_CAPS_AUTHONLY, NULL);
+	if (wake)
+		wake_up(&ci->i_cap_wq);
+}
+
+
+/*
+ * symlinks
+ */
+static void *ceph_sym_follow_link(struct dentry *dentry, struct nameidata *nd)
+{
+	struct ceph_inode_info *ci = ceph_inode(dentry->d_inode);
+	nd_set_link(nd, ci->i_symlink);
+	return NULL;
+}
+
+static const struct inode_operations ceph_symlink_iops = {
+	.readlink = generic_readlink,
+	.follow_link = ceph_sym_follow_link,
+};
+
+/*
+ * setattr
+ */
+int ceph_setattr(struct dentry *dentry, struct iattr *attr)
+{
+	struct inode *inode = dentry->d_inode;
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	struct inode *parent_inode = dentry->d_parent->d_inode;
+	const unsigned int ia_valid = attr->ia_valid;
+	struct ceph_mds_request *req;
+	struct ceph_mds_client *mdsc = &ceph_client(dentry->d_sb)->mdsc;
+	int issued;
+	int release = 0, dirtied = 0;
+	int mask = 0;
+	int err = 0;
+
+	if (ceph_snap(inode) != CEPH_NOSNAP)
+		return -EROFS;
+
+	__ceph_do_pending_vmtruncate(inode);
+
+	err = inode_change_ok(inode, attr);
+	if (err != 0)
+		return err;
+
+	req = ceph_mdsc_create_request(mdsc, CEPH_MDS_OP_SETATTR,
+				       USE_AUTH_MDS);
+	if (IS_ERR(req))
+		return PTR_ERR(req);
+
+	spin_lock(&inode->i_lock);
+	issued = __ceph_caps_issued(ci, NULL);
+	dout("setattr %p issued %s\n", inode, ceph_cap_string(issued));
+
+	if (ia_valid & ATTR_UID) {
+		dout("setattr %p uid %d -> %d\n", inode,
+		     inode->i_uid, attr->ia_uid);
+		if (issued & CEPH_CAP_AUTH_EXCL) {
+			inode->i_uid = attr->ia_uid;
+			dirtied |= CEPH_CAP_AUTH_EXCL;
+		} else if ((issued & CEPH_CAP_AUTH_SHARED) == 0 ||
+			   attr->ia_uid != inode->i_uid) {
+			req->r_args.setattr.uid = cpu_to_le32(attr->ia_uid);
+			mask |= CEPH_SETATTR_UID;
+			release |= CEPH_CAP_AUTH_SHARED;
+		}
+	}
+	if (ia_valid & ATTR_GID) {
+		dout("setattr %p gid %d -> %d\n", inode,
+		     inode->i_gid, attr->ia_gid);
+		if (issued & CEPH_CAP_AUTH_EXCL) {
+			inode->i_gid = attr->ia_gid;
+			dirtied |= CEPH_CAP_AUTH_EXCL;
+		} else if ((issued & CEPH_CAP_AUTH_SHARED) == 0 ||
+			   attr->ia_gid != inode->i_gid) {
+			req->r_args.setattr.gid = cpu_to_le32(attr->ia_gid);
+			mask |= CEPH_SETATTR_GID;
+			release |= CEPH_CAP_AUTH_SHARED;
+		}
+	}
+	if (ia_valid & ATTR_MODE) {
+		dout("setattr %p mode 0%o -> 0%o\n", inode, inode->i_mode,
+		     attr->ia_mode);
+		if (issued & CEPH_CAP_AUTH_EXCL) {
+			inode->i_mode = attr->ia_mode;
+			dirtied |= CEPH_CAP_AUTH_EXCL;
+		} else if ((issued & CEPH_CAP_AUTH_SHARED) == 0 ||
+			   attr->ia_mode != inode->i_mode) {
+			req->r_args.setattr.mode = cpu_to_le32(attr->ia_mode);
+			mask |= CEPH_SETATTR_MODE;
+			release |= CEPH_CAP_AUTH_SHARED;
+		}
+	}
+
+	if (ia_valid & ATTR_ATIME) {
+		dout("setattr %p atime %ld.%ld -> %ld.%ld\n", inode,
+		     inode->i_atime.tv_sec, inode->i_atime.tv_nsec,
+		     attr->ia_atime.tv_sec, attr->ia_atime.tv_nsec);
+		if (issued & CEPH_CAP_FILE_EXCL) {
+			ci->i_time_warp_seq++;
+			inode->i_atime = attr->ia_atime;
+			dirtied |= CEPH_CAP_FILE_EXCL;
+		} else if ((issued & CEPH_CAP_FILE_WR) &&
+			   timespec_compare(&inode->i_atime,
+					    &attr->ia_atime) < 0) {
+			inode->i_atime = attr->ia_atime;
+			dirtied |= CEPH_CAP_FILE_WR;
+		} else if ((issued & CEPH_CAP_FILE_SHARED) == 0 ||
+			   !timespec_equal(&inode->i_atime, &attr->ia_atime)) {
+			ceph_encode_timespec(&req->r_args.setattr.atime,
+					     &attr->ia_atime);
+			mask |= CEPH_SETATTR_ATIME;
+			release |= CEPH_CAP_FILE_CACHE | CEPH_CAP_FILE_RD |
+				CEPH_CAP_FILE_WR;
+		}
+	}
+	if (ia_valid & ATTR_MTIME) {
+		dout("setattr %p mtime %ld.%ld -> %ld.%ld\n", inode,
+		     inode->i_mtime.tv_sec, inode->i_mtime.tv_nsec,
+		     attr->ia_mtime.tv_sec, attr->ia_mtime.tv_nsec);
+		if (issued & CEPH_CAP_FILE_EXCL) {
+			ci->i_time_warp_seq++;
+			inode->i_mtime = attr->ia_mtime;
+			dirtied |= CEPH_CAP_FILE_EXCL;
+		} else if ((issued & CEPH_CAP_FILE_WR) &&
+			   timespec_compare(&inode->i_mtime,
+					    &attr->ia_mtime) < 0) {
+			inode->i_mtime = attr->ia_mtime;
+			dirtied |= CEPH_CAP_FILE_WR;
+		} else if ((issued & CEPH_CAP_FILE_SHARED) == 0 ||
+			   !timespec_equal(&inode->i_mtime, &attr->ia_mtime)) {
+			ceph_encode_timespec(&req->r_args.setattr.mtime,
+					     &attr->ia_mtime);
+			mask |= CEPH_SETATTR_MTIME;
+			release |= CEPH_CAP_FILE_SHARED | CEPH_CAP_FILE_RD |
+				CEPH_CAP_FILE_WR;
+		}
+	}
+	if (ia_valid & ATTR_SIZE) {
+		dout("setattr %p size %lld -> %lld\n", inode,
+		     inode->i_size, attr->ia_size);
+		if (attr->ia_size > inode->i_sb->s_maxbytes) {
+			err = -EINVAL;
+			goto out;
+		}
+		if ((issued & CEPH_CAP_FILE_EXCL) &&
+		    attr->ia_size > inode->i_size) {
+			inode->i_size = attr->ia_size;
+			inode->i_blocks =
+				(attr->ia_size + (1 << 9) - 1) >> 9;
+			inode->i_ctime = attr->ia_ctime;
+			ci->i_reported_size = attr->ia_size;
+			dirtied |= CEPH_CAP_FILE_EXCL;
+		} else if ((issued & CEPH_CAP_FILE_SHARED) == 0 ||
+			   attr->ia_size != inode->i_size) {
+			req->r_args.setattr.size = cpu_to_le64(attr->ia_size);
+			req->r_args.setattr.old_size =
+				cpu_to_le64(inode->i_size);
+			mask |= CEPH_SETATTR_SIZE;
+			release |= CEPH_CAP_FILE_SHARED | CEPH_CAP_FILE_RD |
+				CEPH_CAP_FILE_WR;
+		}
+	}
+
+	/* these do nothing */
+	if (ia_valid & ATTR_CTIME) {
+		bool only = (ia_valid & (ATTR_SIZE|ATTR_MTIME|ATTR_ATIME|
+					 ATTR_MODE|ATTR_UID|ATTR_GID)) == 0;
+		dout("setattr %p ctime %ld.%ld -> %ld.%ld (%s)\n", inode,
+		     inode->i_ctime.tv_sec, inode->i_ctime.tv_nsec,
+		     attr->ia_ctime.tv_sec, attr->ia_ctime.tv_nsec,
+		     only ? "ctime only" : "ignored");
+		inode->i_ctime = attr->ia_ctime;
+		if (only) {
+			/*
+			 * if kernel wants to dirty ctime but nothing else,
+			 * we need to choose a cap to dirty under, or do
+			 * a almost-no-op setattr
+			 */
+			if (issued & CEPH_CAP_AUTH_EXCL)
+				dirtied |= CEPH_CAP_AUTH_EXCL;
+			else if (issued & CEPH_CAP_FILE_EXCL)
+				dirtied |= CEPH_CAP_FILE_EXCL;
+			else if (issued & CEPH_CAP_XATTR_EXCL)
+				dirtied |= CEPH_CAP_XATTR_EXCL;
+			else
+				mask |= CEPH_SETATTR_CTIME;
+		}
+	}
+	if (ia_valid & ATTR_FILE)
+		dout("setattr %p ATTR_FILE ... hrm!\n", inode);
+
+	if (dirtied) {
+		__ceph_mark_dirty_caps(ci, dirtied);
+		inode->i_ctime = CURRENT_TIME;
+	}
+
+	release &= issued;
+	spin_unlock(&inode->i_lock);
+
+	if (mask) {
+		req->r_inode = igrab(inode);
+		req->r_inode_drop = release;
+		req->r_args.setattr.mask = cpu_to_le32(mask);
+		req->r_num_caps = 1;
+		err = ceph_mdsc_do_request(mdsc, parent_inode, req);
+	}
+	dout("setattr %p result=%d (%s locally, %d remote)\n", inode, err,
+	     ceph_cap_string(dirtied), mask);
+
+	ceph_mdsc_put_request(req);
+	__ceph_do_pending_vmtruncate(inode);
+	return err;
+out:
+	spin_unlock(&inode->i_lock);
+	ceph_mdsc_put_request(req);
+	return err;
+}
+
+/*
+ * Verify that we have a lease on the given mask.  If not,
+ * do a getattr against an mds.
+ */
+int ceph_do_getattr(struct inode *inode, int mask)
+{
+	struct ceph_client *client = ceph_sb_to_client(inode->i_sb);
+	struct ceph_mds_client *mdsc = &client->mdsc;
+	struct ceph_mds_request *req;
+	int err;
+
+	if (ceph_snap(inode) == CEPH_SNAPDIR) {
+		dout("do_getattr inode %p SNAPDIR\n", inode);
+		return 0;
+	}
+
+	dout("do_getattr inode %p mask %s\n", inode, ceph_cap_string(mask));
+	if (ceph_caps_issued_mask(ceph_inode(inode), mask, 1))
+		return 0;
+
+	req = ceph_mdsc_create_request(mdsc, CEPH_MDS_OP_GETATTR, USE_ANY_MDS);
+	if (IS_ERR(req))
+		return PTR_ERR(req);
+	req->r_inode = igrab(inode);
+	req->r_num_caps = 1;
+	req->r_args.getattr.mask = cpu_to_le32(mask);
+	err = ceph_mdsc_do_request(mdsc, NULL, req);
+	ceph_mdsc_put_request(req);
+	dout("do_getattr result=%d\n", err);
+	return err;
+}
+
+
+/*
+ * Check inode permissions.  We verify we have a valid value for
+ * the AUTH cap, then call the generic handler.
+ */
+int ceph_permission(struct inode *inode, int mask)
+{
+	int err = ceph_do_getattr(inode, CEPH_CAP_AUTH_SHARED);
+
+	if (!err)
+		err = generic_permission(inode, mask, NULL);
+	return err;
+}
+
+/*
+ * Get all attributes.  Hopefully somedata we'll have a statlite()
+ * and can limit the fields we require to be accurate.
+ */
+int ceph_getattr(struct vfsmount *mnt, struct dentry *dentry,
+		 struct kstat *stat)
+{
+	struct inode *inode = dentry->d_inode;
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	int err;
+
+	err = ceph_do_getattr(inode, CEPH_STAT_CAP_INODE_ALL);
+	if (!err) {
+		generic_fillattr(inode, stat);
+		stat->ino = inode->i_ino;
+		if (ceph_snap(inode) != CEPH_NOSNAP)
+			stat->dev = ceph_snap(inode);
+		else
+			stat->dev = 0;
+		if (S_ISDIR(inode->i_mode)) {
+			stat->size = ci->i_rbytes;
+			stat->blocks = 0;
+			stat->blksize = 65536;
+		}
+	}
+	return err;
+}
diff --git a/fs/ceph/ioctl.c b/fs/ceph/ioctl.c
new file mode 100644
index 000000000000..8a5bcae62846
--- /dev/null
+++ b/fs/ceph/ioctl.c
@@ -0,0 +1,160 @@
+#include <linux/in.h>
+
+#include "ioctl.h"
+#include "super.h"
+#include "ceph_debug.h"
+
+
+/*
+ * ioctls
+ */
+
+/*
+ * get and set the file layout
+ */
+static long ceph_ioctl_get_layout(struct file *file, void __user *arg)
+{
+	struct ceph_inode_info *ci = ceph_inode(file->f_dentry->d_inode);
+	struct ceph_ioctl_layout l;
+	int err;
+
+	err = ceph_do_getattr(file->f_dentry->d_inode, CEPH_STAT_CAP_LAYOUT);
+	if (!err) {
+		l.stripe_unit = ceph_file_layout_su(ci->i_layout);
+		l.stripe_count = ceph_file_layout_stripe_count(ci->i_layout);
+		l.object_size = ceph_file_layout_object_size(ci->i_layout);
+		l.data_pool = le32_to_cpu(ci->i_layout.fl_pg_pool);
+		l.preferred_osd =
+			(s32)le32_to_cpu(ci->i_layout.fl_pg_preferred);
+		if (copy_to_user(arg, &l, sizeof(l)))
+			return -EFAULT;
+	}
+
+	return err;
+}
+
+static long ceph_ioctl_set_layout(struct file *file, void __user *arg)
+{
+	struct inode *inode = file->f_dentry->d_inode;
+	struct inode *parent_inode = file->f_dentry->d_parent->d_inode;
+	struct ceph_mds_client *mdsc = &ceph_sb_to_client(inode->i_sb)->mdsc;
+	struct ceph_mds_request *req;
+	struct ceph_ioctl_layout l;
+	int err, i;
+
+	/* copy and validate */
+	if (copy_from_user(&l, arg, sizeof(l)))
+		return -EFAULT;
+
+	if ((l.object_size & ~PAGE_MASK) ||
+	    (l.stripe_unit & ~PAGE_MASK) ||
+	    !l.stripe_unit ||
+	    (l.object_size &&
+	     (unsigned)l.object_size % (unsigned)l.stripe_unit))
+		return -EINVAL;
+
+	/* make sure it's a valid data pool */
+	if (l.data_pool > 0) {
+		mutex_lock(&mdsc->mutex);
+		err = -EINVAL;
+		for (i = 0; i < mdsc->mdsmap->m_num_data_pg_pools; i++)
+			if (mdsc->mdsmap->m_data_pg_pools[i] == l.data_pool) {
+				err = 0;
+				break;
+			}
+		mutex_unlock(&mdsc->mutex);
+		if (err)
+			return err;
+	}
+
+	req = ceph_mdsc_create_request(mdsc, CEPH_MDS_OP_SETLAYOUT,
+				       USE_AUTH_MDS);
+	if (IS_ERR(req))
+		return PTR_ERR(req);
+	req->r_inode = igrab(inode);
+	req->r_inode_drop = CEPH_CAP_FILE_SHARED | CEPH_CAP_FILE_EXCL;
+
+	req->r_args.setlayout.layout.fl_stripe_unit =
+		cpu_to_le32(l.stripe_unit);
+	req->r_args.setlayout.layout.fl_stripe_count =
+		cpu_to_le32(l.stripe_count);
+	req->r_args.setlayout.layout.fl_object_size =
+		cpu_to_le32(l.object_size);
+	req->r_args.setlayout.layout.fl_pg_pool = cpu_to_le32(l.data_pool);
+	req->r_args.setlayout.layout.fl_pg_preferred =
+		cpu_to_le32(l.preferred_osd);
+
+	err = ceph_mdsc_do_request(mdsc, parent_inode, req);
+	ceph_mdsc_put_request(req);
+	return err;
+}
+
+/*
+ * Return object name, size/offset information, and location (OSD
+ * number, network address) for a given file offset.
+ */
+static long ceph_ioctl_get_dataloc(struct file *file, void __user *arg)
+{
+	struct ceph_ioctl_dataloc dl;
+	struct inode *inode = file->f_dentry->d_inode;
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	struct ceph_osd_client *osdc = &ceph_client(inode->i_sb)->osdc;
+	u64 len = 1, olen;
+	u64 tmp;
+	struct ceph_object_layout ol;
+	struct ceph_pg pgid;
+
+	/* copy and validate */
+	if (copy_from_user(&dl, arg, sizeof(dl)))
+		return -EFAULT;
+
+	down_read(&osdc->map_sem);
+	ceph_calc_file_object_mapping(&ci->i_layout, dl.file_offset, &len,
+				      &dl.object_no, &dl.object_offset, &olen);
+	dl.file_offset -= dl.object_offset;
+	dl.object_size = ceph_file_layout_object_size(ci->i_layout);
+	dl.block_size = ceph_file_layout_su(ci->i_layout);
+
+	/* block_offset = object_offset % block_size */
+	tmp = dl.object_offset;
+	dl.block_offset = do_div(tmp, dl.block_size);
+
+	snprintf(dl.object_name, sizeof(dl.object_name), "%llx.%08llx",
+		 ceph_ino(inode), dl.object_no);
+	ceph_calc_object_layout(&ol, dl.object_name, &ci->i_layout,
+				osdc->osdmap);
+
+	pgid = ol.ol_pgid;
+	dl.osd = ceph_calc_pg_primary(osdc->osdmap, pgid);
+	if (dl.osd >= 0) {
+		struct ceph_entity_addr *a =
+			ceph_osd_addr(osdc->osdmap, dl.osd);
+		if (a)
+			memcpy(&dl.osd_addr, &a->in_addr, sizeof(dl.osd_addr));
+	} else {
+		memset(&dl.osd_addr, 0, sizeof(dl.osd_addr));
+	}
+	up_read(&osdc->map_sem);
+
+	/* send result back to user */
+	if (copy_to_user(arg, &dl, sizeof(dl)))
+		return -EFAULT;
+
+	return 0;
+}
+
+long ceph_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	dout("ioctl file %p cmd %u arg %lu\n", file, cmd, arg);
+	switch (cmd) {
+	case CEPH_IOC_GET_LAYOUT:
+		return ceph_ioctl_get_layout(file, (void __user *)arg);
+
+	case CEPH_IOC_SET_LAYOUT:
+		return ceph_ioctl_set_layout(file, (void __user *)arg);
+
+	case CEPH_IOC_GET_DATALOC:
+		return ceph_ioctl_get_dataloc(file, (void __user *)arg);
+	}
+	return -ENOTTY;
+}
diff --git a/fs/ceph/ioctl.h b/fs/ceph/ioctl.h
new file mode 100644
index 000000000000..25e4f1a9d059
--- /dev/null
+++ b/fs/ceph/ioctl.h
@@ -0,0 +1,40 @@
+#ifndef FS_CEPH_IOCTL_H
+#define FS_CEPH_IOCTL_H
+
+#include <linux/ioctl.h>
+#include <linux/types.h>
+
+#define CEPH_IOCTL_MAGIC 0x97
+
+/* just use u64 to align sanely on all archs */
+struct ceph_ioctl_layout {
+	__u64 stripe_unit, stripe_count, object_size;
+	__u64 data_pool;
+	__s64 preferred_osd;
+};
+
+#define CEPH_IOC_GET_LAYOUT _IOR(CEPH_IOCTL_MAGIC, 1,		\
+				   struct ceph_ioctl_layout)
+#define CEPH_IOC_SET_LAYOUT _IOW(CEPH_IOCTL_MAGIC, 2,		\
+				   struct ceph_ioctl_layout)
+
+/*
+ * Extract identity, address of the OSD and object storing a given
+ * file offset.
+ */
+struct ceph_ioctl_dataloc {
+	__u64 file_offset;           /* in+out: file offset */
+	__u64 object_offset;         /* out: offset in object */
+	__u64 object_no;             /* out: object # */
+	__u64 object_size;           /* out: object size */
+	char object_name[64];        /* out: object name */
+	__u64 block_offset;          /* out: offset in block */
+	__u64 block_size;            /* out: block length */
+	__s64 osd;                   /* out: osd # */
+	struct sockaddr_storage osd_addr; /* out: osd address */
+};
+
+#define CEPH_IOC_GET_DATALOC _IOWR(CEPH_IOCTL_MAGIC, 3,	\
+				   struct ceph_ioctl_dataloc)
+
+#endif
diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c
new file mode 100644
index 000000000000..a2600101ec22
--- /dev/null
+++ b/fs/ceph/mds_client.c
@@ -0,0 +1,3021 @@
+#include "ceph_debug.h"
+
+#include <linux/wait.h>
+#include <linux/sched.h>
+
+#include "mds_client.h"
+#include "mon_client.h"
+#include "super.h"
+#include "messenger.h"
+#include "decode.h"
+#include "auth.h"
+#include "pagelist.h"
+
+/*
+ * A cluster of MDS (metadata server) daemons is responsible for
+ * managing the file system namespace (the directory hierarchy and
+ * inodes) and for coordinating shared access to storage.  Metadata is
+ * partitioning hierarchically across a number of servers, and that
+ * partition varies over time as the cluster adjusts the distribution
+ * in order to balance load.
+ *
+ * The MDS client is primarily responsible to managing synchronous
+ * metadata requests for operations like open, unlink, and so forth.
+ * If there is a MDS failure, we find out about it when we (possibly
+ * request and) receive a new MDS map, and can resubmit affected
+ * requests.
+ *
+ * For the most part, though, we take advantage of a lossless
+ * communications channel to the MDS, and do not need to worry about
+ * timing out or resubmitting requests.
+ *
+ * We maintain a stateful "session" with each MDS we interact with.
+ * Within each session, we sent periodic heartbeat messages to ensure
+ * any capabilities or leases we have been issues remain valid.  If
+ * the session times out and goes stale, our leases and capabilities
+ * are no longer valid.
+ */
+
+static void __wake_requests(struct ceph_mds_client *mdsc,
+			    struct list_head *head);
+
+const static struct ceph_connection_operations mds_con_ops;
+
+
+/*
+ * mds reply parsing
+ */
+
+/*
+ * parse individual inode info
+ */
+static int parse_reply_info_in(void **p, void *end,
+			       struct ceph_mds_reply_info_in *info)
+{
+	int err = -EIO;
+
+	info->in = *p;
+	*p += sizeof(struct ceph_mds_reply_inode) +
+		sizeof(*info->in->fragtree.splits) *
+		le32_to_cpu(info->in->fragtree.nsplits);
+
+	ceph_decode_32_safe(p, end, info->symlink_len, bad);
+	ceph_decode_need(p, end, info->symlink_len, bad);
+	info->symlink = *p;
+	*p += info->symlink_len;
+
+	ceph_decode_32_safe(p, end, info->xattr_len, bad);
+	ceph_decode_need(p, end, info->xattr_len, bad);
+	info->xattr_data = *p;
+	*p += info->xattr_len;
+	return 0;
+bad:
+	return err;
+}
+
+/*
+ * parse a normal reply, which may contain a (dir+)dentry and/or a
+ * target inode.
+ */
+static int parse_reply_info_trace(void **p, void *end,
+				  struct ceph_mds_reply_info_parsed *info)
+{
+	int err;
+
+	if (info->head->is_dentry) {
+		err = parse_reply_info_in(p, end, &info->diri);
+		if (err < 0)
+			goto out_bad;
+
+		if (unlikely(*p + sizeof(*info->dirfrag) > end))
+			goto bad;
+		info->dirfrag = *p;
+		*p += sizeof(*info->dirfrag) +
+			sizeof(u32)*le32_to_cpu(info->dirfrag->ndist);
+		if (unlikely(*p > end))
+			goto bad;
+
+		ceph_decode_32_safe(p, end, info->dname_len, bad);
+		ceph_decode_need(p, end, info->dname_len, bad);
+		info->dname = *p;
+		*p += info->dname_len;
+		info->dlease = *p;
+		*p += sizeof(*info->dlease);
+	}
+
+	if (info->head->is_target) {
+		err = parse_reply_info_in(p, end, &info->targeti);
+		if (err < 0)
+			goto out_bad;
+	}
+
+	if (unlikely(*p != end))
+		goto bad;
+	return 0;
+
+bad:
+	err = -EIO;
+out_bad:
+	pr_err("problem parsing mds trace %d\n", err);
+	return err;
+}
+
+/*
+ * parse readdir results
+ */
+static int parse_reply_info_dir(void **p, void *end,
+				struct ceph_mds_reply_info_parsed *info)
+{
+	u32 num, i = 0;
+	int err;
+
+	info->dir_dir = *p;
+	if (*p + sizeof(*info->dir_dir) > end)
+		goto bad;
+	*p += sizeof(*info->dir_dir) +
+		sizeof(u32)*le32_to_cpu(info->dir_dir->ndist);
+	if (*p > end)
+		goto bad;
+
+	ceph_decode_need(p, end, sizeof(num) + 2, bad);
+	num = ceph_decode_32(p);
+	info->dir_end = ceph_decode_8(p);
+	info->dir_complete = ceph_decode_8(p);
+	if (num == 0)
+		goto done;
+
+	/* alloc large array */
+	info->dir_nr = num;
+	info->dir_in = kcalloc(num, sizeof(*info->dir_in) +
+			       sizeof(*info->dir_dname) +
+			       sizeof(*info->dir_dname_len) +
+			       sizeof(*info->dir_dlease),
+			       GFP_NOFS);
+	if (info->dir_in == NULL) {
+		err = -ENOMEM;
+		goto out_bad;
+	}
+	info->dir_dname = (void *)(info->dir_in + num);
+	info->dir_dname_len = (void *)(info->dir_dname + num);
+	info->dir_dlease = (void *)(info->dir_dname_len + num);
+
+	while (num) {
+		/* dentry */
+		ceph_decode_need(p, end, sizeof(u32)*2, bad);
+		info->dir_dname_len[i] = ceph_decode_32(p);
+		ceph_decode_need(p, end, info->dir_dname_len[i], bad);
+		info->dir_dname[i] = *p;
+		*p += info->dir_dname_len[i];
+		dout("parsed dir dname '%.*s'\n", info->dir_dname_len[i],
+		     info->dir_dname[i]);
+		info->dir_dlease[i] = *p;
+		*p += sizeof(struct ceph_mds_reply_lease);
+
+		/* inode */
+		err = parse_reply_info_in(p, end, &info->dir_in[i]);
+		if (err < 0)
+			goto out_bad;
+		i++;
+		num--;
+	}
+
+done:
+	if (*p != end)
+		goto bad;
+	return 0;
+
+bad:
+	err = -EIO;
+out_bad:
+	pr_err("problem parsing dir contents %d\n", err);
+	return err;
+}
+
+/*
+ * parse entire mds reply
+ */
+static int parse_reply_info(struct ceph_msg *msg,
+			    struct ceph_mds_reply_info_parsed *info)
+{
+	void *p, *end;
+	u32 len;
+	int err;
+
+	info->head = msg->front.iov_base;
+	p = msg->front.iov_base + sizeof(struct ceph_mds_reply_head);
+	end = p + msg->front.iov_len - sizeof(struct ceph_mds_reply_head);
+
+	/* trace */
+	ceph_decode_32_safe(&p, end, len, bad);
+	if (len > 0) {
+		err = parse_reply_info_trace(&p, p+len, info);
+		if (err < 0)
+			goto out_bad;
+	}
+
+	/* dir content */
+	ceph_decode_32_safe(&p, end, len, bad);
+	if (len > 0) {
+		err = parse_reply_info_dir(&p, p+len, info);
+		if (err < 0)
+			goto out_bad;
+	}
+
+	/* snap blob */
+	ceph_decode_32_safe(&p, end, len, bad);
+	info->snapblob_len = len;
+	info->snapblob = p;
+	p += len;
+
+	if (p != end)
+		goto bad;
+	return 0;
+
+bad:
+	err = -EIO;
+out_bad:
+	pr_err("mds parse_reply err %d\n", err);
+	return err;
+}
+
+static void destroy_reply_info(struct ceph_mds_reply_info_parsed *info)
+{
+	kfree(info->dir_in);
+}
+
+
+/*
+ * sessions
+ */
+static const char *session_state_name(int s)
+{
+	switch (s) {
+	case CEPH_MDS_SESSION_NEW: return "new";
+	case CEPH_MDS_SESSION_OPENING: return "opening";
+	case CEPH_MDS_SESSION_OPEN: return "open";
+	case CEPH_MDS_SESSION_HUNG: return "hung";
+	case CEPH_MDS_SESSION_CLOSING: return "closing";
+	case CEPH_MDS_SESSION_RESTARTING: return "restarting";
+	case CEPH_MDS_SESSION_RECONNECTING: return "reconnecting";
+	default: return "???";
+	}
+}
+
+static struct ceph_mds_session *get_session(struct ceph_mds_session *s)
+{
+	if (atomic_inc_not_zero(&s->s_ref)) {
+		dout("mdsc get_session %p %d -> %d\n", s,
+		     atomic_read(&s->s_ref)-1, atomic_read(&s->s_ref));
+		return s;
+	} else {
+		dout("mdsc get_session %p 0 -- FAIL", s);
+		return NULL;
+	}
+}
+
+void ceph_put_mds_session(struct ceph_mds_session *s)
+{
+	dout("mdsc put_session %p %d -> %d\n", s,
+	     atomic_read(&s->s_ref), atomic_read(&s->s_ref)-1);
+	if (atomic_dec_and_test(&s->s_ref)) {
+		if (s->s_authorizer)
+			s->s_mdsc->client->monc.auth->ops->destroy_authorizer(
+				s->s_mdsc->client->monc.auth, s->s_authorizer);
+		kfree(s);
+	}
+}
+
+/*
+ * called under mdsc->mutex
+ */
+struct ceph_mds_session *__ceph_lookup_mds_session(struct ceph_mds_client *mdsc,
+						   int mds)
+{
+	struct ceph_mds_session *session;
+
+	if (mds >= mdsc->max_sessions || mdsc->sessions[mds] == NULL)
+		return NULL;
+	session = mdsc->sessions[mds];
+	dout("lookup_mds_session %p %d\n", session,
+	     atomic_read(&session->s_ref));
+	get_session(session);
+	return session;
+}
+
+static bool __have_session(struct ceph_mds_client *mdsc, int mds)
+{
+	if (mds >= mdsc->max_sessions)
+		return false;
+	return mdsc->sessions[mds];
+}
+
+static int __verify_registered_session(struct ceph_mds_client *mdsc,
+				       struct ceph_mds_session *s)
+{
+	if (s->s_mds >= mdsc->max_sessions ||
+	    mdsc->sessions[s->s_mds] != s)
+		return -ENOENT;
+	return 0;
+}
+
+/*
+ * create+register a new session for given mds.
+ * called under mdsc->mutex.
+ */
+static struct ceph_mds_session *register_session(struct ceph_mds_client *mdsc,
+						 int mds)
+{
+	struct ceph_mds_session *s;
+
+	s = kzalloc(sizeof(*s), GFP_NOFS);
+	s->s_mdsc = mdsc;
+	s->s_mds = mds;
+	s->s_state = CEPH_MDS_SESSION_NEW;
+	s->s_ttl = 0;
+	s->s_seq = 0;
+	mutex_init(&s->s_mutex);
+
+	ceph_con_init(mdsc->client->msgr, &s->s_con);
+	s->s_con.private = s;
+	s->s_con.ops = &mds_con_ops;
+	s->s_con.peer_name.type = CEPH_ENTITY_TYPE_MDS;
+	s->s_con.peer_name.num = cpu_to_le64(mds);
+
+	spin_lock_init(&s->s_cap_lock);
+	s->s_cap_gen = 0;
+	s->s_cap_ttl = 0;
+	s->s_renew_requested = 0;
+	s->s_renew_seq = 0;
+	INIT_LIST_HEAD(&s->s_caps);
+	s->s_nr_caps = 0;
+	s->s_trim_caps = 0;
+	atomic_set(&s->s_ref, 1);
+	INIT_LIST_HEAD(&s->s_waiting);
+	INIT_LIST_HEAD(&s->s_unsafe);
+	s->s_num_cap_releases = 0;
+	s->s_cap_iterator = NULL;
+	INIT_LIST_HEAD(&s->s_cap_releases);
+	INIT_LIST_HEAD(&s->s_cap_releases_done);
+	INIT_LIST_HEAD(&s->s_cap_flushing);
+	INIT_LIST_HEAD(&s->s_cap_snaps_flushing);
+
+	dout("register_session mds%d\n", mds);
+	if (mds >= mdsc->max_sessions) {
+		int newmax = 1 << get_count_order(mds+1);
+		struct ceph_mds_session **sa;
+
+		dout("register_session realloc to %d\n", newmax);
+		sa = kcalloc(newmax, sizeof(void *), GFP_NOFS);
+		if (sa == NULL)
+			goto fail_realloc;
+		if (mdsc->sessions) {
+			memcpy(sa, mdsc->sessions,
+			       mdsc->max_sessions * sizeof(void *));
+			kfree(mdsc->sessions);
+		}
+		mdsc->sessions = sa;
+		mdsc->max_sessions = newmax;
+	}
+	mdsc->sessions[mds] = s;
+	atomic_inc(&s->s_ref);  /* one ref to sessions[], one to caller */
+
+	ceph_con_open(&s->s_con, ceph_mdsmap_get_addr(mdsc->mdsmap, mds));
+
+	return s;
+
+fail_realloc:
+	kfree(s);
+	return ERR_PTR(-ENOMEM);
+}
+
+/*
+ * called under mdsc->mutex
+ */
+static void __unregister_session(struct ceph_mds_client *mdsc,
+			       struct ceph_mds_session *s)
+{
+	dout("__unregister_session mds%d %p\n", s->s_mds, s);
+	BUG_ON(mdsc->sessions[s->s_mds] != s);
+	mdsc->sessions[s->s_mds] = NULL;
+	ceph_con_close(&s->s_con);
+	ceph_put_mds_session(s);
+}
+
+/*
+ * drop session refs in request.
+ *
+ * should be last request ref, or hold mdsc->mutex
+ */
+static void put_request_session(struct ceph_mds_request *req)
+{
+	if (req->r_session) {
+		ceph_put_mds_session(req->r_session);
+		req->r_session = NULL;
+	}
+}
+
+void ceph_mdsc_release_request(struct kref *kref)
+{
+	struct ceph_mds_request *req = container_of(kref,
+						    struct ceph_mds_request,
+						    r_kref);
+	if (req->r_request)
+		ceph_msg_put(req->r_request);
+	if (req->r_reply) {
+		ceph_msg_put(req->r_reply);
+		destroy_reply_info(&req->r_reply_info);
+	}
+	if (req->r_inode) {
+		ceph_put_cap_refs(ceph_inode(req->r_inode),
+				  CEPH_CAP_PIN);
+		iput(req->r_inode);
+	}
+	if (req->r_locked_dir)
+		ceph_put_cap_refs(ceph_inode(req->r_locked_dir),
+				  CEPH_CAP_PIN);
+	if (req->r_target_inode)
+		iput(req->r_target_inode);
+	if (req->r_dentry)
+		dput(req->r_dentry);
+	if (req->r_old_dentry) {
+		ceph_put_cap_refs(
+			ceph_inode(req->r_old_dentry->d_parent->d_inode),
+			CEPH_CAP_PIN);
+		dput(req->r_old_dentry);
+	}
+	kfree(req->r_path1);
+	kfree(req->r_path2);
+	put_request_session(req);
+	ceph_unreserve_caps(&req->r_caps_reservation);
+	kfree(req);
+}
+
+/*
+ * lookup session, bump ref if found.
+ *
+ * called under mdsc->mutex.
+ */
+static struct ceph_mds_request *__lookup_request(struct ceph_mds_client *mdsc,
+					     u64 tid)
+{
+	struct ceph_mds_request *req;
+	struct rb_node *n = mdsc->request_tree.rb_node;
+
+	while (n) {
+		req = rb_entry(n, struct ceph_mds_request, r_node);
+		if (tid < req->r_tid)
+			n = n->rb_left;
+		else if (tid > req->r_tid)
+			n = n->rb_right;
+		else {
+			ceph_mdsc_get_request(req);
+			return req;
+		}
+	}
+	return NULL;
+}
+
+static void __insert_request(struct ceph_mds_client *mdsc,
+			     struct ceph_mds_request *new)
+{
+	struct rb_node **p = &mdsc->request_tree.rb_node;
+	struct rb_node *parent = NULL;
+	struct ceph_mds_request *req = NULL;
+
+	while (*p) {
+		parent = *p;
+		req = rb_entry(parent, struct ceph_mds_request, r_node);
+		if (new->r_tid < req->r_tid)
+			p = &(*p)->rb_left;
+		else if (new->r_tid > req->r_tid)
+			p = &(*p)->rb_right;
+		else
+			BUG();
+	}
+
+	rb_link_node(&new->r_node, parent, p);
+	rb_insert_color(&new->r_node, &mdsc->request_tree);
+}
+
+/*
+ * Register an in-flight request, and assign a tid.  Link to directory
+ * are modifying (if any).
+ *
+ * Called under mdsc->mutex.
+ */
+static void __register_request(struct ceph_mds_client *mdsc,
+			       struct ceph_mds_request *req,
+			       struct inode *dir)
+{
+	req->r_tid = ++mdsc->last_tid;
+	if (req->r_num_caps)
+		ceph_reserve_caps(&req->r_caps_reservation, req->r_num_caps);
+	dout("__register_request %p tid %lld\n", req, req->r_tid);
+	ceph_mdsc_get_request(req);
+	__insert_request(mdsc, req);
+
+	if (dir) {
+		struct ceph_inode_info *ci = ceph_inode(dir);
+
+		spin_lock(&ci->i_unsafe_lock);
+		req->r_unsafe_dir = dir;
+		list_add_tail(&req->r_unsafe_dir_item, &ci->i_unsafe_dirops);
+		spin_unlock(&ci->i_unsafe_lock);
+	}
+}
+
+static void __unregister_request(struct ceph_mds_client *mdsc,
+				 struct ceph_mds_request *req)
+{
+	dout("__unregister_request %p tid %lld\n", req, req->r_tid);
+	rb_erase(&req->r_node, &mdsc->request_tree);
+	ceph_mdsc_put_request(req);
+
+	if (req->r_unsafe_dir) {
+		struct ceph_inode_info *ci = ceph_inode(req->r_unsafe_dir);
+
+		spin_lock(&ci->i_unsafe_lock);
+		list_del_init(&req->r_unsafe_dir_item);
+		spin_unlock(&ci->i_unsafe_lock);
+	}
+}
+
+/*
+ * Choose mds to send request to next.  If there is a hint set in the
+ * request (e.g., due to a prior forward hint from the mds), use that.
+ * Otherwise, consult frag tree and/or caps to identify the
+ * appropriate mds.  If all else fails, choose randomly.
+ *
+ * Called under mdsc->mutex.
+ */
+static int __choose_mds(struct ceph_mds_client *mdsc,
+			struct ceph_mds_request *req)
+{
+	struct inode *inode;
+	struct ceph_inode_info *ci;
+	struct ceph_cap *cap;
+	int mode = req->r_direct_mode;
+	int mds = -1;
+	u32 hash = req->r_direct_hash;
+	bool is_hash = req->r_direct_is_hash;
+
+	/*
+	 * is there a specific mds we should try?  ignore hint if we have
+	 * no session and the mds is not up (active or recovering).
+	 */
+	if (req->r_resend_mds >= 0 &&
+	    (__have_session(mdsc, req->r_resend_mds) ||
+	     ceph_mdsmap_get_state(mdsc->mdsmap, req->r_resend_mds) > 0)) {
+		dout("choose_mds using resend_mds mds%d\n",
+		     req->r_resend_mds);
+		return req->r_resend_mds;
+	}
+
+	if (mode == USE_RANDOM_MDS)
+		goto random;
+
+	inode = NULL;
+	if (req->r_inode) {
+		inode = req->r_inode;
+	} else if (req->r_dentry) {
+		if (req->r_dentry->d_inode) {
+			inode = req->r_dentry->d_inode;
+		} else {
+			inode = req->r_dentry->d_parent->d_inode;
+			hash = req->r_dentry->d_name.hash;
+			is_hash = true;
+		}
+	}
+	dout("__choose_mds %p is_hash=%d (%d) mode %d\n", inode, (int)is_hash,
+	     (int)hash, mode);
+	if (!inode)
+		goto random;
+	ci = ceph_inode(inode);
+
+	if (is_hash && S_ISDIR(inode->i_mode)) {
+		struct ceph_inode_frag frag;
+		int found;
+
+		ceph_choose_frag(ci, hash, &frag, &found);
+		if (found) {
+			if (mode == USE_ANY_MDS && frag.ndist > 0) {
+				u8 r;
+
+				/* choose a random replica */
+				get_random_bytes(&r, 1);
+				r %= frag.ndist;
+				mds = frag.dist[r];
+				dout("choose_mds %p %llx.%llx "
+				     "frag %u mds%d (%d/%d)\n",
+				     inode, ceph_vinop(inode),
+				     frag.frag, frag.mds,
+				     (int)r, frag.ndist);
+				return mds;
+			}
+
+			/* since this file/dir wasn't known to be
+			 * replicated, then we want to look for the
+			 * authoritative mds. */
+			mode = USE_AUTH_MDS;
+			if (frag.mds >= 0) {
+				/* choose auth mds */
+				mds = frag.mds;
+				dout("choose_mds %p %llx.%llx "
+				     "frag %u mds%d (auth)\n",
+				     inode, ceph_vinop(inode), frag.frag, mds);
+				return mds;
+			}
+		}
+	}
+
+	spin_lock(&inode->i_lock);
+	cap = NULL;
+	if (mode == USE_AUTH_MDS)
+		cap = ci->i_auth_cap;
+	if (!cap && !RB_EMPTY_ROOT(&ci->i_caps))
+		cap = rb_entry(rb_first(&ci->i_caps), struct ceph_cap, ci_node);
+	if (!cap) {
+		spin_unlock(&inode->i_lock);
+		goto random;
+	}
+	mds = cap->session->s_mds;
+	dout("choose_mds %p %llx.%llx mds%d (%scap %p)\n",
+	     inode, ceph_vinop(inode), mds,
+	     cap == ci->i_auth_cap ? "auth " : "", cap);
+	spin_unlock(&inode->i_lock);
+	return mds;
+
+random:
+	mds = ceph_mdsmap_get_random_mds(mdsc->mdsmap);
+	dout("choose_mds chose random mds%d\n", mds);
+	return mds;
+}
+
+
+/*
+ * session messages
+ */
+static struct ceph_msg *create_session_msg(u32 op, u64 seq)
+{
+	struct ceph_msg *msg;
+	struct ceph_mds_session_head *h;
+
+	msg = ceph_msg_new(CEPH_MSG_CLIENT_SESSION, sizeof(*h), 0, 0, NULL);
+	if (IS_ERR(msg)) {
+		pr_err("create_session_msg ENOMEM creating msg\n");
+		return ERR_PTR(PTR_ERR(msg));
+	}
+	h = msg->front.iov_base;
+	h->op = cpu_to_le32(op);
+	h->seq = cpu_to_le64(seq);
+	return msg;
+}
+
+/*
+ * send session open request.
+ *
+ * called under mdsc->mutex
+ */
+static int __open_session(struct ceph_mds_client *mdsc,
+			  struct ceph_mds_session *session)
+{
+	struct ceph_msg *msg;
+	int mstate;
+	int mds = session->s_mds;
+	int err = 0;
+
+	/* wait for mds to go active? */
+	mstate = ceph_mdsmap_get_state(mdsc->mdsmap, mds);
+	dout("open_session to mds%d (%s)\n", mds,
+	     ceph_mds_state_name(mstate));
+	session->s_state = CEPH_MDS_SESSION_OPENING;
+	session->s_renew_requested = jiffies;
+
+	/* send connect message */
+	msg = create_session_msg(CEPH_SESSION_REQUEST_OPEN, session->s_seq);
+	if (IS_ERR(msg)) {
+		err = PTR_ERR(msg);
+		goto out;
+	}
+	ceph_con_send(&session->s_con, msg);
+
+out:
+	return 0;
+}
+
+/*
+ * session caps
+ */
+
+/*
+ * Free preallocated cap messages assigned to this session
+ */
+static void cleanup_cap_releases(struct ceph_mds_session *session)
+{
+	struct ceph_msg *msg;
+
+	spin_lock(&session->s_cap_lock);
+	while (!list_empty(&session->s_cap_releases)) {
+		msg = list_first_entry(&session->s_cap_releases,
+				       struct ceph_msg, list_head);
+		list_del_init(&msg->list_head);
+		ceph_msg_put(msg);
+	}
+	while (!list_empty(&session->s_cap_releases_done)) {
+		msg = list_first_entry(&session->s_cap_releases_done,
+				       struct ceph_msg, list_head);
+		list_del_init(&msg->list_head);
+		ceph_msg_put(msg);
+	}
+	spin_unlock(&session->s_cap_lock);
+}
+
+/*
+ * Helper to safely iterate over all caps associated with a session.
+ *
+ * caller must hold session s_mutex
+ */
+static int iterate_session_caps(struct ceph_mds_session *session,
+				 int (*cb)(struct inode *, struct ceph_cap *,
+					    void *), void *arg)
+{
+	struct list_head *p;
+	struct ceph_cap *cap;
+	struct inode *inode, *last_inode = NULL;
+	struct ceph_cap *old_cap = NULL;
+	int ret;
+
+	dout("iterate_session_caps %p mds%d\n", session, session->s_mds);
+	spin_lock(&session->s_cap_lock);
+	p = session->s_caps.next;
+	while (p != &session->s_caps) {
+		cap = list_entry(p, struct ceph_cap, session_caps);
+		inode = igrab(&cap->ci->vfs_inode);
+		if (!inode) {
+			p = p->next;
+			continue;
+		}
+		session->s_cap_iterator = cap;
+		spin_unlock(&session->s_cap_lock);
+
+		if (last_inode) {
+			iput(last_inode);
+			last_inode = NULL;
+		}
+		if (old_cap) {
+			ceph_put_cap(old_cap);
+			old_cap = NULL;
+		}
+
+		ret = cb(inode, cap, arg);
+		last_inode = inode;
+
+		spin_lock(&session->s_cap_lock);
+		p = p->next;
+		if (cap->ci == NULL) {
+			dout("iterate_session_caps  finishing cap %p removal\n",
+			     cap);
+			BUG_ON(cap->session != session);
+			list_del_init(&cap->session_caps);
+			session->s_nr_caps--;
+			cap->session = NULL;
+			old_cap = cap;  /* put_cap it w/o locks held */
+		}
+		if (ret < 0)
+			goto out;
+	}
+	ret = 0;
+out:
+	session->s_cap_iterator = NULL;
+	spin_unlock(&session->s_cap_lock);
+
+	if (last_inode)
+		iput(last_inode);
+	if (old_cap)
+		ceph_put_cap(old_cap);
+
+	return ret;
+}
+
+static int remove_session_caps_cb(struct inode *inode, struct ceph_cap *cap,
+				   void *arg)
+{
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	dout("removing cap %p, ci is %p, inode is %p\n",
+	     cap, ci, &ci->vfs_inode);
+	ceph_remove_cap(cap);
+	return 0;
+}
+
+/*
+ * caller must hold session s_mutex
+ */
+static void remove_session_caps(struct ceph_mds_session *session)
+{
+	dout("remove_session_caps on %p\n", session);
+	iterate_session_caps(session, remove_session_caps_cb, NULL);
+	BUG_ON(session->s_nr_caps > 0);
+	cleanup_cap_releases(session);
+}
+
+/*
+ * wake up any threads waiting on this session's caps.  if the cap is
+ * old (didn't get renewed on the client reconnect), remove it now.
+ *
+ * caller must hold s_mutex.
+ */
+static int wake_up_session_cb(struct inode *inode, struct ceph_cap *cap,
+			      void *arg)
+{
+	struct ceph_inode_info *ci = ceph_inode(inode);
+
+	wake_up(&ci->i_cap_wq);
+	if (arg) {
+		spin_lock(&inode->i_lock);
+		ci->i_wanted_max_size = 0;
+		ci->i_requested_max_size = 0;
+		spin_unlock(&inode->i_lock);
+	}
+	return 0;
+}
+
+static void wake_up_session_caps(struct ceph_mds_session *session,
+				 int reconnect)
+{
+	dout("wake_up_session_caps %p mds%d\n", session, session->s_mds);
+	iterate_session_caps(session, wake_up_session_cb,
+			     (void *)(unsigned long)reconnect);
+}
+
+/*
+ * Send periodic message to MDS renewing all currently held caps.  The
+ * ack will reset the expiration for all caps from this session.
+ *
+ * caller holds s_mutex
+ */
+static int send_renew_caps(struct ceph_mds_client *mdsc,
+			   struct ceph_mds_session *session)
+{
+	struct ceph_msg *msg;
+	int state;
+
+	if (time_after_eq(jiffies, session->s_cap_ttl) &&
+	    time_after_eq(session->s_cap_ttl, session->s_renew_requested))
+		pr_info("mds%d caps stale\n", session->s_mds);
+
+	/* do not try to renew caps until a recovering mds has reconnected
+	 * with its clients. */
+	state = ceph_mdsmap_get_state(mdsc->mdsmap, session->s_mds);
+	if (state < CEPH_MDS_STATE_RECONNECT) {
+		dout("send_renew_caps ignoring mds%d (%s)\n",
+		     session->s_mds, ceph_mds_state_name(state));
+		return 0;
+	}
+
+	dout("send_renew_caps to mds%d (%s)\n", session->s_mds,
+		ceph_mds_state_name(state));
+	session->s_renew_requested = jiffies;
+	msg = create_session_msg(CEPH_SESSION_REQUEST_RENEWCAPS,
+				 ++session->s_renew_seq);
+	if (IS_ERR(msg))
+		return PTR_ERR(msg);
+	ceph_con_send(&session->s_con, msg);
+	return 0;
+}
+
+/*
+ * Note new cap ttl, and any transition from stale -> not stale (fresh?).
+ *
+ * Called under session->s_mutex
+ */
+static void renewed_caps(struct ceph_mds_client *mdsc,
+			 struct ceph_mds_session *session, int is_renew)
+{
+	int was_stale;
+	int wake = 0;
+
+	spin_lock(&session->s_cap_lock);
+	was_stale = is_renew && (session->s_cap_ttl == 0 ||
+				 time_after_eq(jiffies, session->s_cap_ttl));
+
+	session->s_cap_ttl = session->s_renew_requested +
+		mdsc->mdsmap->m_session_timeout*HZ;
+
+	if (was_stale) {
+		if (time_before(jiffies, session->s_cap_ttl)) {
+			pr_info("mds%d caps renewed\n", session->s_mds);
+			wake = 1;
+		} else {
+			pr_info("mds%d caps still stale\n", session->s_mds);
+		}
+	}
+	dout("renewed_caps mds%d ttl now %lu, was %s, now %s\n",
+	     session->s_mds, session->s_cap_ttl, was_stale ? "stale" : "fresh",
+	     time_before(jiffies, session->s_cap_ttl) ? "stale" : "fresh");
+	spin_unlock(&session->s_cap_lock);
+
+	if (wake)
+		wake_up_session_caps(session, 0);
+}
+
+/*
+ * send a session close request
+ */
+static int request_close_session(struct ceph_mds_client *mdsc,
+				 struct ceph_mds_session *session)
+{
+	struct ceph_msg *msg;
+	int err = 0;
+
+	dout("request_close_session mds%d state %s seq %lld\n",
+	     session->s_mds, session_state_name(session->s_state),
+	     session->s_seq);
+	msg = create_session_msg(CEPH_SESSION_REQUEST_CLOSE, session->s_seq);
+	if (IS_ERR(msg))
+		err = PTR_ERR(msg);
+	else
+		ceph_con_send(&session->s_con, msg);
+	return err;
+}
+
+/*
+ * Called with s_mutex held.
+ */
+static int __close_session(struct ceph_mds_client *mdsc,
+			 struct ceph_mds_session *session)
+{
+	if (session->s_state >= CEPH_MDS_SESSION_CLOSING)
+		return 0;
+	session->s_state = CEPH_MDS_SESSION_CLOSING;
+	return request_close_session(mdsc, session);
+}
+
+/*
+ * Trim old(er) caps.
+ *
+ * Because we can't cache an inode without one or more caps, we do
+ * this indirectly: if a cap is unused, we prune its aliases, at which
+ * point the inode will hopefully get dropped to.
+ *
+ * Yes, this is a bit sloppy.  Our only real goal here is to respond to
+ * memory pressure from the MDS, though, so it needn't be perfect.
+ */
+static int trim_caps_cb(struct inode *inode, struct ceph_cap *cap, void *arg)
+{
+	struct ceph_mds_session *session = arg;
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	int used, oissued, mine;
+
+	if (session->s_trim_caps <= 0)
+		return -1;
+
+	spin_lock(&inode->i_lock);
+	mine = cap->issued | cap->implemented;
+	used = __ceph_caps_used(ci);
+	oissued = __ceph_caps_issued_other(ci, cap);
+
+	dout("trim_caps_cb %p cap %p mine %s oissued %s used %s\n",
+	     inode, cap, ceph_cap_string(mine), ceph_cap_string(oissued),
+	     ceph_cap_string(used));
+	if (ci->i_dirty_caps)
+		goto out;   /* dirty caps */
+	if ((used & ~oissued) & mine)
+		goto out;   /* we need these caps */
+
+	session->s_trim_caps--;
+	if (oissued) {
+		/* we aren't the only cap.. just remove us */
+		__ceph_remove_cap(cap);
+	} else {
+		/* try to drop referring dentries */
+		spin_unlock(&inode->i_lock);
+		d_prune_aliases(inode);
+		dout("trim_caps_cb %p cap %p  pruned, count now %d\n",
+		     inode, cap, atomic_read(&inode->i_count));
+		return 0;
+	}
+
+out:
+	spin_unlock(&inode->i_lock);
+	return 0;
+}
+
+/*
+ * Trim session cap count down to some max number.
+ */
+static int trim_caps(struct ceph_mds_client *mdsc,
+		     struct ceph_mds_session *session,
+		     int max_caps)
+{
+	int trim_caps = session->s_nr_caps - max_caps;
+
+	dout("trim_caps mds%d start: %d / %d, trim %d\n",
+	     session->s_mds, session->s_nr_caps, max_caps, trim_caps);
+	if (trim_caps > 0) {
+		session->s_trim_caps = trim_caps;
+		iterate_session_caps(session, trim_caps_cb, session);
+		dout("trim_caps mds%d done: %d / %d, trimmed %d\n",
+		     session->s_mds, session->s_nr_caps, max_caps,
+			trim_caps - session->s_trim_caps);
+		session->s_trim_caps = 0;
+	}
+	return 0;
+}
+
+/*
+ * Allocate cap_release messages.  If there is a partially full message
+ * in the queue, try to allocate enough to cover it's remainder, so that
+ * we can send it immediately.
+ *
+ * Called under s_mutex.
+ */
+static int add_cap_releases(struct ceph_mds_client *mdsc,
+			    struct ceph_mds_session *session,
+			    int extra)
+{
+	struct ceph_msg *msg;
+	struct ceph_mds_cap_release *head;
+	int err = -ENOMEM;
+
+	if (extra < 0)
+		extra = mdsc->client->mount_args->cap_release_safety;
+
+	spin_lock(&session->s_cap_lock);
+
+	if (!list_empty(&session->s_cap_releases)) {
+		msg = list_first_entry(&session->s_cap_releases,
+				       struct ceph_msg,
+				 list_head);
+		head = msg->front.iov_base;
+		extra += CEPH_CAPS_PER_RELEASE - le32_to_cpu(head->num);
+	}
+
+	while (session->s_num_cap_releases < session->s_nr_caps + extra) {
+		spin_unlock(&session->s_cap_lock);
+		msg = ceph_msg_new(CEPH_MSG_CLIENT_CAPRELEASE, PAGE_CACHE_SIZE,
+				   0, 0, NULL);
+		if (!msg)
+			goto out_unlocked;
+		dout("add_cap_releases %p msg %p now %d\n", session, msg,
+		     (int)msg->front.iov_len);
+		head = msg->front.iov_base;
+		head->num = cpu_to_le32(0);
+		msg->front.iov_len = sizeof(*head);
+		spin_lock(&session->s_cap_lock);
+		list_add(&msg->list_head, &session->s_cap_releases);
+		session->s_num_cap_releases += CEPH_CAPS_PER_RELEASE;
+	}
+
+	if (!list_empty(&session->s_cap_releases)) {
+		msg = list_first_entry(&session->s_cap_releases,
+				       struct ceph_msg,
+				       list_head);
+		head = msg->front.iov_base;
+		if (head->num) {
+			dout(" queueing non-full %p (%d)\n", msg,
+			     le32_to_cpu(head->num));
+			list_move_tail(&msg->list_head,
+				      &session->s_cap_releases_done);
+			session->s_num_cap_releases -=
+				CEPH_CAPS_PER_RELEASE - le32_to_cpu(head->num);
+		}
+	}
+	err = 0;
+	spin_unlock(&session->s_cap_lock);
+out_unlocked:
+	return err;
+}
+
+/*
+ * flush all dirty inode data to disk.
+ *
+ * returns true if we've flushed through want_flush_seq
+ */
+static int check_cap_flush(struct ceph_mds_client *mdsc, u64 want_flush_seq)
+{
+	int mds, ret = 1;
+
+	dout("check_cap_flush want %lld\n", want_flush_seq);
+	mutex_lock(&mdsc->mutex);
+	for (mds = 0; ret && mds < mdsc->max_sessions; mds++) {
+		struct ceph_mds_session *session = mdsc->sessions[mds];
+
+		if (!session)
+			continue;
+		get_session(session);
+		mutex_unlock(&mdsc->mutex);
+
+		mutex_lock(&session->s_mutex);
+		if (!list_empty(&session->s_cap_flushing)) {
+			struct ceph_inode_info *ci =
+				list_entry(session->s_cap_flushing.next,
+					   struct ceph_inode_info,
+					   i_flushing_item);
+			struct inode *inode = &ci->vfs_inode;
+
+			spin_lock(&inode->i_lock);
+			if (ci->i_cap_flush_seq <= want_flush_seq) {
+				dout("check_cap_flush still flushing %p "
+				     "seq %lld <= %lld to mds%d\n", inode,
+				     ci->i_cap_flush_seq, want_flush_seq,
+				     session->s_mds);
+				ret = 0;
+			}
+			spin_unlock(&inode->i_lock);
+		}
+		mutex_unlock(&session->s_mutex);
+		ceph_put_mds_session(session);
+
+		if (!ret)
+			return ret;
+		mutex_lock(&mdsc->mutex);
+	}
+
+	mutex_unlock(&mdsc->mutex);
+	dout("check_cap_flush ok, flushed thru %lld\n", want_flush_seq);
+	return ret;
+}
+
+/*
+ * called under s_mutex
+ */
+static void send_cap_releases(struct ceph_mds_client *mdsc,
+		       struct ceph_mds_session *session)
+{
+	struct ceph_msg *msg;
+
+	dout("send_cap_releases mds%d\n", session->s_mds);
+	while (1) {
+		spin_lock(&session->s_cap_lock);
+		if (list_empty(&session->s_cap_releases_done))
+			break;
+		msg = list_first_entry(&session->s_cap_releases_done,
+				 struct ceph_msg, list_head);
+		list_del_init(&msg->list_head);
+		spin_unlock(&session->s_cap_lock);
+		msg->hdr.front_len = cpu_to_le32(msg->front.iov_len);
+		dout("send_cap_releases mds%d %p\n", session->s_mds, msg);
+		ceph_con_send(&session->s_con, msg);
+	}
+	spin_unlock(&session->s_cap_lock);
+}
+
+/*
+ * requests
+ */
+
+/*
+ * Create an mds request.
+ */
+struct ceph_mds_request *
+ceph_mdsc_create_request(struct ceph_mds_client *mdsc, int op, int mode)
+{
+	struct ceph_mds_request *req = kzalloc(sizeof(*req), GFP_NOFS);
+
+	if (!req)
+		return ERR_PTR(-ENOMEM);
+
+	req->r_started = jiffies;
+	req->r_resend_mds = -1;
+	INIT_LIST_HEAD(&req->r_unsafe_dir_item);
+	req->r_fmode = -1;
+	kref_init(&req->r_kref);
+	INIT_LIST_HEAD(&req->r_wait);
+	init_completion(&req->r_completion);
+	init_completion(&req->r_safe_completion);
+	INIT_LIST_HEAD(&req->r_unsafe_item);
+
+	req->r_op = op;
+	req->r_direct_mode = mode;
+	return req;
+}
+
+/*
+ * return oldest (lowest) request, tid in request tree, 0 if none.
+ *
+ * called under mdsc->mutex.
+ */
+static struct ceph_mds_request *__get_oldest_req(struct ceph_mds_client *mdsc)
+{
+	if (RB_EMPTY_ROOT(&mdsc->request_tree))
+		return NULL;
+	return rb_entry(rb_first(&mdsc->request_tree),
+			struct ceph_mds_request, r_node);
+}
+
+static u64 __get_oldest_tid(struct ceph_mds_client *mdsc)
+{
+	struct ceph_mds_request *req = __get_oldest_req(mdsc);
+
+	if (req)
+		return req->r_tid;
+	return 0;
+}
+
+/*
+ * Build a dentry's path.  Allocate on heap; caller must kfree.  Based
+ * on build_path_from_dentry in fs/cifs/dir.c.
+ *
+ * If @stop_on_nosnap, generate path relative to the first non-snapped
+ * inode.
+ *
+ * Encode hidden .snap dirs as a double /, i.e.
+ *   foo/.snap/bar -> foo//bar
+ */
+char *ceph_mdsc_build_path(struct dentry *dentry, int *plen, u64 *base,
+			   int stop_on_nosnap)
+{
+	struct dentry *temp;
+	char *path;
+	int len, pos;
+
+	if (dentry == NULL)
+		return ERR_PTR(-EINVAL);
+
+retry:
+	len = 0;
+	for (temp = dentry; !IS_ROOT(temp);) {
+		struct inode *inode = temp->d_inode;
+		if (inode && ceph_snap(inode) == CEPH_SNAPDIR)
+			len++;  /* slash only */
+		else if (stop_on_nosnap && inode &&
+			 ceph_snap(inode) == CEPH_NOSNAP)
+			break;
+		else
+			len += 1 + temp->d_name.len;
+		temp = temp->d_parent;
+		if (temp == NULL) {
+			pr_err("build_path_dentry corrupt dentry %p\n", dentry);
+			return ERR_PTR(-EINVAL);
+		}
+	}
+	if (len)
+		len--;  /* no leading '/' */
+
+	path = kmalloc(len+1, GFP_NOFS);
+	if (path == NULL)
+		return ERR_PTR(-ENOMEM);
+	pos = len;
+	path[pos] = 0;	/* trailing null */
+	for (temp = dentry; !IS_ROOT(temp) && pos != 0; ) {
+		struct inode *inode = temp->d_inode;
+
+		if (inode && ceph_snap(inode) == CEPH_SNAPDIR) {
+			dout("build_path_dentry path+%d: %p SNAPDIR\n",
+			     pos, temp);
+		} else if (stop_on_nosnap && inode &&
+			   ceph_snap(inode) == CEPH_NOSNAP) {
+			break;
+		} else {
+			pos -= temp->d_name.len;
+			if (pos < 0)
+				break;
+			strncpy(path + pos, temp->d_name.name,
+				temp->d_name.len);
+			dout("build_path_dentry path+%d: %p '%.*s'\n",
+			     pos, temp, temp->d_name.len, path + pos);
+		}
+		if (pos)
+			path[--pos] = '/';
+		temp = temp->d_parent;
+		if (temp == NULL) {
+			pr_err("build_path_dentry corrupt dentry\n");
+			kfree(path);
+			return ERR_PTR(-EINVAL);
+		}
+	}
+	if (pos != 0) {
+		pr_err("build_path_dentry did not end path lookup where "
+		       "expected, namelen is %d, pos is %d\n", len, pos);
+		/* presumably this is only possible if racing with a
+		   rename of one of the parent directories (we can not
+		   lock the dentries above us to prevent this, but
+		   retrying should be harmless) */
+		kfree(path);
+		goto retry;
+	}
+
+	*base = ceph_ino(temp->d_inode);
+	*plen = len;
+	dout("build_path_dentry on %p %d built %llx '%.*s'\n",
+	     dentry, atomic_read(&dentry->d_count), *base, len, path);
+	return path;
+}
+
+static int build_dentry_path(struct dentry *dentry,
+			     const char **ppath, int *ppathlen, u64 *pino,
+			     int *pfreepath)
+{
+	char *path;
+
+	if (ceph_snap(dentry->d_parent->d_inode) == CEPH_NOSNAP) {
+		*pino = ceph_ino(dentry->d_parent->d_inode);
+		*ppath = dentry->d_name.name;
+		*ppathlen = dentry->d_name.len;
+		return 0;
+	}
+	path = ceph_mdsc_build_path(dentry, ppathlen, pino, 1);
+	if (IS_ERR(path))
+		return PTR_ERR(path);
+	*ppath = path;
+	*pfreepath = 1;
+	return 0;
+}
+
+static int build_inode_path(struct inode *inode,
+			    const char **ppath, int *ppathlen, u64 *pino,
+			    int *pfreepath)
+{
+	struct dentry *dentry;
+	char *path;
+
+	if (ceph_snap(inode) == CEPH_NOSNAP) {
+		*pino = ceph_ino(inode);
+		*ppathlen = 0;
+		return 0;
+	}
+	dentry = d_find_alias(inode);
+	path = ceph_mdsc_build_path(dentry, ppathlen, pino, 1);
+	dput(dentry);
+	if (IS_ERR(path))
+		return PTR_ERR(path);
+	*ppath = path;
+	*pfreepath = 1;
+	return 0;
+}
+
+/*
+ * request arguments may be specified via an inode *, a dentry *, or
+ * an explicit ino+path.
+ */
+static int set_request_path_attr(struct inode *rinode, struct dentry *rdentry,
+				  const char *rpath, u64 rino,
+				  const char **ppath, int *pathlen,
+				  u64 *ino, int *freepath)
+{
+	int r = 0;
+
+	if (rinode) {
+		r = build_inode_path(rinode, ppath, pathlen, ino, freepath);
+		dout(" inode %p %llx.%llx\n", rinode, ceph_ino(rinode),
+		     ceph_snap(rinode));
+	} else if (rdentry) {
+		r = build_dentry_path(rdentry, ppath, pathlen, ino, freepath);
+		dout(" dentry %p %llx/%.*s\n", rdentry, *ino, *pathlen,
+		     *ppath);
+	} else if (rpath) {
+		*ino = rino;
+		*ppath = rpath;
+		*pathlen = strlen(rpath);
+		dout(" path %.*s\n", *pathlen, rpath);
+	}
+
+	return r;
+}
+
+/*
+ * called under mdsc->mutex
+ */
+static struct ceph_msg *create_request_message(struct ceph_mds_client *mdsc,
+					       struct ceph_mds_request *req,
+					       int mds)
+{
+	struct ceph_msg *msg;
+	struct ceph_mds_request_head *head;
+	const char *path1 = NULL;
+	const char *path2 = NULL;
+	u64 ino1 = 0, ino2 = 0;
+	int pathlen1 = 0, pathlen2 = 0;
+	int freepath1 = 0, freepath2 = 0;
+	int len;
+	u16 releases;
+	void *p, *end;
+	int ret;
+
+	ret = set_request_path_attr(req->r_inode, req->r_dentry,
+			      req->r_path1, req->r_ino1.ino,
+			      &path1, &pathlen1, &ino1, &freepath1);
+	if (ret < 0) {
+		msg = ERR_PTR(ret);
+		goto out;
+	}
+
+	ret = set_request_path_attr(NULL, req->r_old_dentry,
+			      req->r_path2, req->r_ino2.ino,
+			      &path2, &pathlen2, &ino2, &freepath2);
+	if (ret < 0) {
+		msg = ERR_PTR(ret);
+		goto out_free1;
+	}
+
+	len = sizeof(*head) +
+		pathlen1 + pathlen2 + 2*(1 + sizeof(u32) + sizeof(u64));
+
+	/* calculate (max) length for cap releases */
+	len += sizeof(struct ceph_mds_request_release) *
+		(!!req->r_inode_drop + !!req->r_dentry_drop +
+		 !!req->r_old_inode_drop + !!req->r_old_dentry_drop);
+	if (req->r_dentry_drop)
+		len += req->r_dentry->d_name.len;
+	if (req->r_old_dentry_drop)
+		len += req->r_old_dentry->d_name.len;
+
+	msg = ceph_msg_new(CEPH_MSG_CLIENT_REQUEST, len, 0, 0, NULL);
+	if (IS_ERR(msg))
+		goto out_free2;
+
+	msg->hdr.tid = cpu_to_le64(req->r_tid);
+
+	head = msg->front.iov_base;
+	p = msg->front.iov_base + sizeof(*head);
+	end = msg->front.iov_base + msg->front.iov_len;
+
+	head->mdsmap_epoch = cpu_to_le32(mdsc->mdsmap->m_epoch);
+	head->op = cpu_to_le32(req->r_op);
+	head->caller_uid = cpu_to_le32(current_fsuid());
+	head->caller_gid = cpu_to_le32(current_fsgid());
+	head->args = req->r_args;
+
+	ceph_encode_filepath(&p, end, ino1, path1);
+	ceph_encode_filepath(&p, end, ino2, path2);
+
+	/* cap releases */
+	releases = 0;
+	if (req->r_inode_drop)
+		releases += ceph_encode_inode_release(&p,
+		      req->r_inode ? req->r_inode : req->r_dentry->d_inode,
+		      mds, req->r_inode_drop, req->r_inode_unless, 0);
+	if (req->r_dentry_drop)
+		releases += ceph_encode_dentry_release(&p, req->r_dentry,
+		       mds, req->r_dentry_drop, req->r_dentry_unless);
+	if (req->r_old_dentry_drop)
+		releases += ceph_encode_dentry_release(&p, req->r_old_dentry,
+		       mds, req->r_old_dentry_drop, req->r_old_dentry_unless);
+	if (req->r_old_inode_drop)
+		releases += ceph_encode_inode_release(&p,
+		      req->r_old_dentry->d_inode,
+		      mds, req->r_old_inode_drop, req->r_old_inode_unless, 0);
+	head->num_releases = cpu_to_le16(releases);
+
+	BUG_ON(p > end);
+	msg->front.iov_len = p - msg->front.iov_base;
+	msg->hdr.front_len = cpu_to_le32(msg->front.iov_len);
+
+	msg->pages = req->r_pages;
+	msg->nr_pages = req->r_num_pages;
+	msg->hdr.data_len = cpu_to_le32(req->r_data_len);
+	msg->hdr.data_off = cpu_to_le16(0);
+
+out_free2:
+	if (freepath2)
+		kfree((char *)path2);
+out_free1:
+	if (freepath1)
+		kfree((char *)path1);
+out:
+	return msg;
+}
+
+/*
+ * called under mdsc->mutex if error, under no mutex if
+ * success.
+ */
+static void complete_request(struct ceph_mds_client *mdsc,
+			     struct ceph_mds_request *req)
+{
+	if (req->r_callback)
+		req->r_callback(mdsc, req);
+	else
+		complete(&req->r_completion);
+}
+
+/*
+ * called under mdsc->mutex
+ */
+static int __prepare_send_request(struct ceph_mds_client *mdsc,
+				  struct ceph_mds_request *req,
+				  int mds)
+{
+	struct ceph_mds_request_head *rhead;
+	struct ceph_msg *msg;
+	int flags = 0;
+
+	req->r_mds = mds;
+	req->r_attempts++;
+	dout("prepare_send_request %p tid %lld %s (attempt %d)\n", req,
+	     req->r_tid, ceph_mds_op_name(req->r_op), req->r_attempts);
+
+	if (req->r_request) {
+		ceph_msg_put(req->r_request);
+		req->r_request = NULL;
+	}
+	msg = create_request_message(mdsc, req, mds);
+	if (IS_ERR(msg)) {
+		req->r_reply = ERR_PTR(PTR_ERR(msg));
+		complete_request(mdsc, req);
+		return -PTR_ERR(msg);
+	}
+	req->r_request = msg;
+
+	rhead = msg->front.iov_base;
+	rhead->oldest_client_tid = cpu_to_le64(__get_oldest_tid(mdsc));
+	if (req->r_got_unsafe)
+		flags |= CEPH_MDS_FLAG_REPLAY;
+	if (req->r_locked_dir)
+		flags |= CEPH_MDS_FLAG_WANT_DENTRY;
+	rhead->flags = cpu_to_le32(flags);
+	rhead->num_fwd = req->r_num_fwd;
+	rhead->num_retry = req->r_attempts - 1;
+
+	dout(" r_locked_dir = %p\n", req->r_locked_dir);
+
+	if (req->r_target_inode && req->r_got_unsafe)
+		rhead->ino = cpu_to_le64(ceph_ino(req->r_target_inode));
+	else
+		rhead->ino = 0;
+	return 0;
+}
+
+/*
+ * send request, or put it on the appropriate wait list.
+ */
+static int __do_request(struct ceph_mds_client *mdsc,
+			struct ceph_mds_request *req)
+{
+	struct ceph_mds_session *session = NULL;
+	int mds = -1;
+	int err = -EAGAIN;
+
+	if (req->r_reply)
+		goto out;
+
+	if (req->r_timeout &&
+	    time_after_eq(jiffies, req->r_started + req->r_timeout)) {
+		dout("do_request timed out\n");
+		err = -EIO;
+		goto finish;
+	}
+
+	mds = __choose_mds(mdsc, req);
+	if (mds < 0 ||
+	    ceph_mdsmap_get_state(mdsc->mdsmap, mds) < CEPH_MDS_STATE_ACTIVE) {
+		dout("do_request no mds or not active, waiting for map\n");
+		list_add(&req->r_wait, &mdsc->waiting_for_map);
+		goto out;
+	}
+
+	/* get, open session */
+	session = __ceph_lookup_mds_session(mdsc, mds);
+	if (!session)
+		session = register_session(mdsc, mds);
+	dout("do_request mds%d session %p state %s\n", mds, session,
+	     session_state_name(session->s_state));
+	if (session->s_state != CEPH_MDS_SESSION_OPEN &&
+	    session->s_state != CEPH_MDS_SESSION_HUNG) {
+		if (session->s_state == CEPH_MDS_SESSION_NEW ||
+		    session->s_state == CEPH_MDS_SESSION_CLOSING)
+			__open_session(mdsc, session);
+		list_add(&req->r_wait, &session->s_waiting);
+		goto out_session;
+	}
+
+	/* send request */
+	req->r_session = get_session(session);
+	req->r_resend_mds = -1;   /* forget any previous mds hint */
+
+	if (req->r_request_started == 0)   /* note request start time */
+		req->r_request_started = jiffies;
+
+	err = __prepare_send_request(mdsc, req, mds);
+	if (!err) {
+		ceph_msg_get(req->r_request);
+		ceph_con_send(&session->s_con, req->r_request);
+	}
+
+out_session:
+	ceph_put_mds_session(session);
+out:
+	return err;
+
+finish:
+	req->r_reply = ERR_PTR(err);
+	complete_request(mdsc, req);
+	goto out;
+}
+
+/*
+ * called under mdsc->mutex
+ */
+static void __wake_requests(struct ceph_mds_client *mdsc,
+			    struct list_head *head)
+{
+	struct ceph_mds_request *req, *nreq;
+
+	list_for_each_entry_safe(req, nreq, head, r_wait) {
+		list_del_init(&req->r_wait);
+		__do_request(mdsc, req);
+	}
+}
+
+/*
+ * Wake up threads with requests pending for @mds, so that they can
+ * resubmit their requests to a possibly different mds.  If @all is set,
+ * wake up if their requests has been forwarded to @mds, too.
+ */
+static void kick_requests(struct ceph_mds_client *mdsc, int mds, int all)
+{
+	struct ceph_mds_request *req;
+	struct rb_node *p;
+
+	dout("kick_requests mds%d\n", mds);
+	for (p = rb_first(&mdsc->request_tree); p; p = rb_next(p)) {
+		req = rb_entry(p, struct ceph_mds_request, r_node);
+		if (req->r_got_unsafe)
+			continue;
+		if (req->r_session &&
+		    req->r_session->s_mds == mds) {
+			dout(" kicking tid %llu\n", req->r_tid);
+			put_request_session(req);
+			__do_request(mdsc, req);
+		}
+	}
+}
+
+void ceph_mdsc_submit_request(struct ceph_mds_client *mdsc,
+			      struct ceph_mds_request *req)
+{
+	dout("submit_request on %p\n", req);
+	mutex_lock(&mdsc->mutex);
+	__register_request(mdsc, req, NULL);
+	__do_request(mdsc, req);
+	mutex_unlock(&mdsc->mutex);
+}
+
+/*
+ * Synchrously perform an mds request.  Take care of all of the
+ * session setup, forwarding, retry details.
+ */
+int ceph_mdsc_do_request(struct ceph_mds_client *mdsc,
+			 struct inode *dir,
+			 struct ceph_mds_request *req)
+{
+	int err;
+
+	dout("do_request on %p\n", req);
+
+	/* take CAP_PIN refs for r_inode, r_locked_dir, r_old_dentry */
+	if (req->r_inode)
+		ceph_get_cap_refs(ceph_inode(req->r_inode), CEPH_CAP_PIN);
+	if (req->r_locked_dir)
+		ceph_get_cap_refs(ceph_inode(req->r_locked_dir), CEPH_CAP_PIN);
+	if (req->r_old_dentry)
+		ceph_get_cap_refs(
+			ceph_inode(req->r_old_dentry->d_parent->d_inode),
+			CEPH_CAP_PIN);
+
+	/* issue */
+	mutex_lock(&mdsc->mutex);
+	__register_request(mdsc, req, dir);
+	__do_request(mdsc, req);
+
+	/* wait */
+	if (!req->r_reply) {
+		mutex_unlock(&mdsc->mutex);
+		if (req->r_timeout) {
+			err = (long)wait_for_completion_interruptible_timeout(
+				&req->r_completion, req->r_timeout);
+			if (err == 0)
+				req->r_reply = ERR_PTR(-EIO);
+			else if (err < 0)
+				req->r_reply = ERR_PTR(err);
+		} else {
+                        err = wait_for_completion_interruptible(
+                                &req->r_completion);
+                        if (err)
+                                req->r_reply = ERR_PTR(err);
+		}
+		mutex_lock(&mdsc->mutex);
+	}
+
+	if (IS_ERR(req->r_reply)) {
+		err = PTR_ERR(req->r_reply);
+		req->r_reply = NULL;
+
+		if (err == -ERESTARTSYS) {
+			/* aborted */
+			req->r_aborted = true;
+
+			if (req->r_locked_dir &&
+			    (req->r_op & CEPH_MDS_OP_WRITE)) {
+				struct ceph_inode_info *ci =
+					ceph_inode(req->r_locked_dir);
+
+				dout("aborted, clearing I_COMPLETE on %p\n", 
+				     req->r_locked_dir);
+				spin_lock(&req->r_locked_dir->i_lock);
+				ci->i_ceph_flags &= ~CEPH_I_COMPLETE;
+				ci->i_release_count++;
+				spin_unlock(&req->r_locked_dir->i_lock);
+			}
+		} else {
+			/* clean up this request */
+			__unregister_request(mdsc, req);
+			if (!list_empty(&req->r_unsafe_item))
+				list_del_init(&req->r_unsafe_item);
+			complete(&req->r_safe_completion);
+		}
+	} else if (req->r_err) {
+		err = req->r_err;
+	} else {
+		err = le32_to_cpu(req->r_reply_info.head->result);
+	}
+	mutex_unlock(&mdsc->mutex);
+
+	dout("do_request %p done, result %d\n", req, err);
+	return err;
+}
+
+/*
+ * Handle mds reply.
+ *
+ * We take the session mutex and parse and process the reply immediately.
+ * This preserves the logical ordering of replies, capabilities, etc., sent
+ * by the MDS as they are applied to our local cache.
+ */
+static void handle_reply(struct ceph_mds_session *session, struct ceph_msg *msg)
+{
+	struct ceph_mds_client *mdsc = session->s_mdsc;
+	struct ceph_mds_request *req;
+	struct ceph_mds_reply_head *head = msg->front.iov_base;
+	struct ceph_mds_reply_info_parsed *rinfo;  /* parsed reply info */
+	u64 tid;
+	int err, result;
+	int mds = session->s_mds;
+
+	if (msg->front.iov_len < sizeof(*head)) {
+		pr_err("mdsc_handle_reply got corrupt (short) reply\n");
+		ceph_msg_dump(msg);
+		return;
+	}
+
+	/* get request, session */
+	tid = le64_to_cpu(msg->hdr.tid);
+	mutex_lock(&mdsc->mutex);
+	req = __lookup_request(mdsc, tid);
+	if (!req) {
+		dout("handle_reply on unknown tid %llu\n", tid);
+		mutex_unlock(&mdsc->mutex);
+		return;
+	}
+	dout("handle_reply %p\n", req);
+
+	/* correct session? */
+	if (!req->r_session && req->r_session != session) {
+		pr_err("mdsc_handle_reply got %llu on session mds%d"
+		       " not mds%d\n", tid, session->s_mds,
+		       req->r_session ? req->r_session->s_mds : -1);
+		mutex_unlock(&mdsc->mutex);
+		goto out;
+	}
+
+	/* dup? */
+	if ((req->r_got_unsafe && !head->safe) ||
+	    (req->r_got_safe && head->safe)) {
+		pr_warning("got a dup %s reply on %llu from mds%d\n",
+			   head->safe ? "safe" : "unsafe", tid, mds);
+		mutex_unlock(&mdsc->mutex);
+		goto out;
+	}
+
+	result = le32_to_cpu(head->result);
+
+	/*
+	 * Tolerate 2 consecutive ESTALEs from the same mds.
+	 * FIXME: we should be looking at the cap migrate_seq.
+	 */
+	if (result == -ESTALE) {
+		req->r_direct_mode = USE_AUTH_MDS;
+		req->r_num_stale++;
+		if (req->r_num_stale <= 2) {
+			__do_request(mdsc, req);
+			mutex_unlock(&mdsc->mutex);
+			goto out;
+		}
+	} else {
+		req->r_num_stale = 0;
+	}
+
+	if (head->safe) {
+		req->r_got_safe = true;
+		__unregister_request(mdsc, req);
+		complete(&req->r_safe_completion);
+
+		if (req->r_got_unsafe) {
+			/*
+			 * We already handled the unsafe response, now do the
+			 * cleanup.  No need to examine the response; the MDS
+			 * doesn't include any result info in the safe
+			 * response.  And even if it did, there is nothing
+			 * useful we could do with a revised return value.
+			 */
+			dout("got safe reply %llu, mds%d\n", tid, mds);
+			list_del_init(&req->r_unsafe_item);
+
+			/* last unsafe request during umount? */
+			if (mdsc->stopping && !__get_oldest_req(mdsc))
+				complete(&mdsc->safe_umount_waiters);
+			mutex_unlock(&mdsc->mutex);
+			goto out;
+		}
+	}
+
+	BUG_ON(req->r_reply);
+
+	if (!head->safe) {
+		req->r_got_unsafe = true;
+		list_add_tail(&req->r_unsafe_item, &req->r_session->s_unsafe);
+	}
+
+	dout("handle_reply tid %lld result %d\n", tid, result);
+	rinfo = &req->r_reply_info;
+	err = parse_reply_info(msg, rinfo);
+	mutex_unlock(&mdsc->mutex);
+
+	mutex_lock(&session->s_mutex);
+	if (err < 0) {
+		pr_err("mdsc_handle_reply got corrupt reply mds%d\n", mds);
+		ceph_msg_dump(msg);
+		goto out_err;
+	}
+
+	/* snap trace */
+	if (rinfo->snapblob_len) {
+		down_write(&mdsc->snap_rwsem);
+		ceph_update_snap_trace(mdsc, rinfo->snapblob,
+			       rinfo->snapblob + rinfo->snapblob_len,
+			       le32_to_cpu(head->op) == CEPH_MDS_OP_RMSNAP);
+		downgrade_write(&mdsc->snap_rwsem);
+	} else {
+		down_read(&mdsc->snap_rwsem);
+	}
+
+	/* insert trace into our cache */
+	err = ceph_fill_trace(mdsc->client->sb, req, req->r_session);
+	if (err == 0) {
+		if (result == 0 && rinfo->dir_nr)
+			ceph_readdir_prepopulate(req, req->r_session);
+		ceph_unreserve_caps(&req->r_caps_reservation);
+	}
+
+	up_read(&mdsc->snap_rwsem);
+out_err:
+	if (err) {
+		req->r_err = err;
+	} else {
+		req->r_reply = msg;
+		ceph_msg_get(msg);
+	}
+
+	add_cap_releases(mdsc, req->r_session, -1);
+	mutex_unlock(&session->s_mutex);
+
+	/* kick calling process */
+	complete_request(mdsc, req);
+out:
+	ceph_mdsc_put_request(req);
+	return;
+}
+
+
+
+/*
+ * handle mds notification that our request has been forwarded.
+ */
+static void handle_forward(struct ceph_mds_client *mdsc,
+			   struct ceph_mds_session *session,
+			   struct ceph_msg *msg)
+{
+	struct ceph_mds_request *req;
+	u64 tid = le64_to_cpu(msg->hdr.tid);
+	u32 next_mds;
+	u32 fwd_seq;
+	int err = -EINVAL;
+	void *p = msg->front.iov_base;
+	void *end = p + msg->front.iov_len;
+
+	ceph_decode_need(&p, end, 2*sizeof(u32), bad);
+	next_mds = ceph_decode_32(&p);
+	fwd_seq = ceph_decode_32(&p);
+
+	mutex_lock(&mdsc->mutex);
+	req = __lookup_request(mdsc, tid);
+	if (!req) {
+		dout("forward %llu to mds%d - req dne\n", tid, next_mds);
+		goto out;  /* dup reply? */
+	}
+
+	if (fwd_seq <= req->r_num_fwd) {
+		dout("forward %llu to mds%d - old seq %d <= %d\n",
+		     tid, next_mds, req->r_num_fwd, fwd_seq);
+	} else {
+		/* resend. forward race not possible; mds would drop */
+		dout("forward %llu to mds%d (we resend)\n", tid, next_mds);
+		req->r_num_fwd = fwd_seq;
+		req->r_resend_mds = next_mds;
+		put_request_session(req);
+		__do_request(mdsc, req);
+	}
+	ceph_mdsc_put_request(req);
+out:
+	mutex_unlock(&mdsc->mutex);
+	return;
+
+bad:
+	pr_err("mdsc_handle_forward decode error err=%d\n", err);
+}
+
+/*
+ * handle a mds session control message
+ */
+static void handle_session(struct ceph_mds_session *session,
+			   struct ceph_msg *msg)
+{
+	struct ceph_mds_client *mdsc = session->s_mdsc;
+	u32 op;
+	u64 seq;
+	int mds = session->s_mds;
+	struct ceph_mds_session_head *h = msg->front.iov_base;
+	int wake = 0;
+
+	/* decode */
+	if (msg->front.iov_len != sizeof(*h))
+		goto bad;
+	op = le32_to_cpu(h->op);
+	seq = le64_to_cpu(h->seq);
+
+	mutex_lock(&mdsc->mutex);
+	if (op == CEPH_SESSION_CLOSE)
+		__unregister_session(mdsc, session);
+	/* FIXME: this ttl calculation is generous */
+	session->s_ttl = jiffies + HZ*mdsc->mdsmap->m_session_autoclose;
+	mutex_unlock(&mdsc->mutex);
+
+	mutex_lock(&session->s_mutex);
+
+	dout("handle_session mds%d %s %p state %s seq %llu\n",
+	     mds, ceph_session_op_name(op), session,
+	     session_state_name(session->s_state), seq);
+
+	if (session->s_state == CEPH_MDS_SESSION_HUNG) {
+		session->s_state = CEPH_MDS_SESSION_OPEN;
+		pr_info("mds%d came back\n", session->s_mds);
+	}
+
+	switch (op) {
+	case CEPH_SESSION_OPEN:
+		session->s_state = CEPH_MDS_SESSION_OPEN;
+		renewed_caps(mdsc, session, 0);
+		wake = 1;
+		if (mdsc->stopping)
+			__close_session(mdsc, session);
+		break;
+
+	case CEPH_SESSION_RENEWCAPS:
+		if (session->s_renew_seq == seq)
+			renewed_caps(mdsc, session, 1);
+		break;
+
+	case CEPH_SESSION_CLOSE:
+		remove_session_caps(session);
+		wake = 1; /* for good measure */
+		complete(&mdsc->session_close_waiters);
+		kick_requests(mdsc, mds, 0);      /* cur only */
+		break;
+
+	case CEPH_SESSION_STALE:
+		pr_info("mds%d caps went stale, renewing\n",
+			session->s_mds);
+		spin_lock(&session->s_cap_lock);
+		session->s_cap_gen++;
+		session->s_cap_ttl = 0;
+		spin_unlock(&session->s_cap_lock);
+		send_renew_caps(mdsc, session);
+		break;
+
+	case CEPH_SESSION_RECALL_STATE:
+		trim_caps(mdsc, session, le32_to_cpu(h->max_caps));
+		break;
+
+	default:
+		pr_err("mdsc_handle_session bad op %d mds%d\n", op, mds);
+		WARN_ON(1);
+	}
+
+	mutex_unlock(&session->s_mutex);
+	if (wake) {
+		mutex_lock(&mdsc->mutex);
+		__wake_requests(mdsc, &session->s_waiting);
+		mutex_unlock(&mdsc->mutex);
+	}
+	return;
+
+bad:
+	pr_err("mdsc_handle_session corrupt message mds%d len %d\n", mds,
+	       (int)msg->front.iov_len);
+	ceph_msg_dump(msg);
+	return;
+}
+
+
+/*
+ * called under session->mutex.
+ */
+static void replay_unsafe_requests(struct ceph_mds_client *mdsc,
+				   struct ceph_mds_session *session)
+{
+	struct ceph_mds_request *req, *nreq;
+	int err;
+
+	dout("replay_unsafe_requests mds%d\n", session->s_mds);
+
+	mutex_lock(&mdsc->mutex);
+	list_for_each_entry_safe(req, nreq, &session->s_unsafe, r_unsafe_item) {
+		err = __prepare_send_request(mdsc, req, session->s_mds);
+		if (!err) {
+			ceph_msg_get(req->r_request);
+			ceph_con_send(&session->s_con, req->r_request);
+		}
+	}
+	mutex_unlock(&mdsc->mutex);
+}
+
+/*
+ * Encode information about a cap for a reconnect with the MDS.
+ */
+static int encode_caps_cb(struct inode *inode, struct ceph_cap *cap,
+			  void *arg)
+{
+	struct ceph_mds_cap_reconnect rec;
+	struct ceph_inode_info *ci;
+	struct ceph_pagelist *pagelist = arg;
+	char *path;
+	int pathlen, err;
+	u64 pathbase;
+	struct dentry *dentry;
+
+	ci = cap->ci;
+
+	dout(" adding %p ino %llx.%llx cap %p %lld %s\n",
+	     inode, ceph_vinop(inode), cap, cap->cap_id,
+	     ceph_cap_string(cap->issued));
+	err = ceph_pagelist_encode_64(pagelist, ceph_ino(inode));
+	if (err)
+		return err;
+
+	dentry = d_find_alias(inode);
+	if (dentry) {
+		path = ceph_mdsc_build_path(dentry, &pathlen, &pathbase, 0);
+		if (IS_ERR(path)) {
+			err = PTR_ERR(path);
+			BUG_ON(err);
+		}
+	} else {
+		path = NULL;
+		pathlen = 0;
+	}
+	err = ceph_pagelist_encode_string(pagelist, path, pathlen);
+	if (err)
+		goto out;
+
+	spin_lock(&inode->i_lock);
+	cap->seq = 0;        /* reset cap seq */
+	cap->issue_seq = 0;  /* and issue_seq */
+	rec.cap_id = cpu_to_le64(cap->cap_id);
+	rec.pathbase = cpu_to_le64(pathbase);
+	rec.wanted = cpu_to_le32(__ceph_caps_wanted(ci));
+	rec.issued = cpu_to_le32(cap->issued);
+	rec.size = cpu_to_le64(inode->i_size);
+	ceph_encode_timespec(&rec.mtime, &inode->i_mtime);
+	ceph_encode_timespec(&rec.atime, &inode->i_atime);
+	rec.snaprealm = cpu_to_le64(ci->i_snap_realm->ino);
+	spin_unlock(&inode->i_lock);
+
+	err = ceph_pagelist_append(pagelist, &rec, sizeof(rec));
+
+out:
+	kfree(path);
+	dput(dentry);
+	return err;
+}
+
+
+/*
+ * If an MDS fails and recovers, clients need to reconnect in order to
+ * reestablish shared state.  This includes all caps issued through
+ * this session _and_ the snap_realm hierarchy.  Because it's not
+ * clear which snap realms the mds cares about, we send everything we
+ * know about.. that ensures we'll then get any new info the
+ * recovering MDS might have.
+ *
+ * This is a relatively heavyweight operation, but it's rare.
+ *
+ * called with mdsc->mutex held.
+ */
+static void send_mds_reconnect(struct ceph_mds_client *mdsc, int mds)
+{
+	struct ceph_mds_session *session = NULL;
+	struct ceph_msg *reply;
+	struct rb_node *p;
+	int err;
+	struct ceph_pagelist *pagelist;
+
+	pr_info("reconnect to recovering mds%d\n", mds);
+
+	pagelist = kmalloc(sizeof(*pagelist), GFP_NOFS);
+	if (!pagelist)
+		goto fail_nopagelist;
+	ceph_pagelist_init(pagelist);
+
+	reply = ceph_msg_new(CEPH_MSG_CLIENT_RECONNECT, 0, 0, 0, NULL);
+	if (IS_ERR(reply)) {
+		err = PTR_ERR(reply);
+		goto fail_nomsg;
+	}
+
+	/* find session */
+	session = __ceph_lookup_mds_session(mdsc, mds);
+	mutex_unlock(&mdsc->mutex);    /* drop lock for duration */
+
+	if (session) {
+		mutex_lock(&session->s_mutex);
+
+		session->s_state = CEPH_MDS_SESSION_RECONNECTING;
+		session->s_seq = 0;
+
+		ceph_con_open(&session->s_con,
+			      ceph_mdsmap_get_addr(mdsc->mdsmap, mds));
+
+		/* replay unsafe requests */
+		replay_unsafe_requests(mdsc, session);
+	} else {
+		dout("no session for mds%d, will send short reconnect\n",
+		     mds);
+	}
+
+	down_read(&mdsc->snap_rwsem);
+
+	if (!session)
+		goto send;
+	dout("session %p state %s\n", session,
+	     session_state_name(session->s_state));
+
+	/* traverse this session's caps */
+	err = ceph_pagelist_encode_32(pagelist, session->s_nr_caps);
+	if (err)
+		goto fail;
+	err = iterate_session_caps(session, encode_caps_cb, pagelist);
+	if (err < 0)
+		goto out;
+
+	/*
+	 * snaprealms.  we provide mds with the ino, seq (version), and
+	 * parent for all of our realms.  If the mds has any newer info,
+	 * it will tell us.
+	 */
+	for (p = rb_first(&mdsc->snap_realms); p; p = rb_next(p)) {
+		struct ceph_snap_realm *realm =
+			rb_entry(p, struct ceph_snap_realm, node);
+		struct ceph_mds_snaprealm_reconnect sr_rec;
+
+		dout(" adding snap realm %llx seq %lld parent %llx\n",
+		     realm->ino, realm->seq, realm->parent_ino);
+		sr_rec.ino = cpu_to_le64(realm->ino);
+		sr_rec.seq = cpu_to_le64(realm->seq);
+		sr_rec.parent = cpu_to_le64(realm->parent_ino);
+		err = ceph_pagelist_append(pagelist, &sr_rec, sizeof(sr_rec));
+		if (err)
+			goto fail;
+	}
+
+send:
+	reply->pagelist = pagelist;
+	reply->hdr.data_len = cpu_to_le32(pagelist->length);
+	reply->nr_pages = calc_pages_for(0, pagelist->length);
+	ceph_con_send(&session->s_con, reply);
+
+	if (session) {
+		session->s_state = CEPH_MDS_SESSION_OPEN;
+		__wake_requests(mdsc, &session->s_waiting);
+	}
+
+out:
+	up_read(&mdsc->snap_rwsem);
+	if (session) {
+		mutex_unlock(&session->s_mutex);
+		ceph_put_mds_session(session);
+	}
+	mutex_lock(&mdsc->mutex);
+	return;
+
+fail:
+	ceph_msg_put(reply);
+fail_nomsg:
+	ceph_pagelist_release(pagelist);
+	kfree(pagelist);
+fail_nopagelist:
+	pr_err("ENOMEM preparing reconnect for mds%d\n", mds);
+	goto out;
+}
+
+
+/*
+ * compare old and new mdsmaps, kicking requests
+ * and closing out old connections as necessary
+ *
+ * called under mdsc->mutex.
+ */
+static void check_new_map(struct ceph_mds_client *mdsc,
+			  struct ceph_mdsmap *newmap,
+			  struct ceph_mdsmap *oldmap)
+{
+	int i;
+	int oldstate, newstate;
+	struct ceph_mds_session *s;
+
+	dout("check_new_map new %u old %u\n",
+	     newmap->m_epoch, oldmap->m_epoch);
+
+	for (i = 0; i < oldmap->m_max_mds && i < mdsc->max_sessions; i++) {
+		if (mdsc->sessions[i] == NULL)
+			continue;
+		s = mdsc->sessions[i];
+		oldstate = ceph_mdsmap_get_state(oldmap, i);
+		newstate = ceph_mdsmap_get_state(newmap, i);
+
+		dout("check_new_map mds%d state %s -> %s (session %s)\n",
+		     i, ceph_mds_state_name(oldstate),
+		     ceph_mds_state_name(newstate),
+		     session_state_name(s->s_state));
+
+		if (memcmp(ceph_mdsmap_get_addr(oldmap, i),
+			   ceph_mdsmap_get_addr(newmap, i),
+			   sizeof(struct ceph_entity_addr))) {
+			if (s->s_state == CEPH_MDS_SESSION_OPENING) {
+				/* the session never opened, just close it
+				 * out now */
+				__wake_requests(mdsc, &s->s_waiting);
+				__unregister_session(mdsc, s);
+			} else {
+				/* just close it */
+				mutex_unlock(&mdsc->mutex);
+				mutex_lock(&s->s_mutex);
+				mutex_lock(&mdsc->mutex);
+				ceph_con_close(&s->s_con);
+				mutex_unlock(&s->s_mutex);
+				s->s_state = CEPH_MDS_SESSION_RESTARTING;
+			}
+
+			/* kick any requests waiting on the recovering mds */
+			kick_requests(mdsc, i, 1);
+		} else if (oldstate == newstate) {
+			continue;  /* nothing new with this mds */
+		}
+
+		/*
+		 * send reconnect?
+		 */
+		if (s->s_state == CEPH_MDS_SESSION_RESTARTING &&
+		    newstate >= CEPH_MDS_STATE_RECONNECT)
+			send_mds_reconnect(mdsc, i);
+
+		/*
+		 * kick requests on any mds that has gone active.
+		 *
+		 * kick requests on cur or forwarder: we may have sent
+		 * the request to mds1, mds1 told us it forwarded it
+		 * to mds2, but then we learn mds1 failed and can't be
+		 * sure it successfully forwarded our request before
+		 * it died.
+		 */
+		if (oldstate < CEPH_MDS_STATE_ACTIVE &&
+		    newstate >= CEPH_MDS_STATE_ACTIVE) {
+			pr_info("mds%d reconnect completed\n", s->s_mds);
+			kick_requests(mdsc, i, 1);
+			ceph_kick_flushing_caps(mdsc, s);
+			wake_up_session_caps(s, 1);
+		}
+	}
+}
+
+
+
+/*
+ * leases
+ */
+
+/*
+ * caller must hold session s_mutex, dentry->d_lock
+ */
+void __ceph_mdsc_drop_dentry_lease(struct dentry *dentry)
+{
+	struct ceph_dentry_info *di = ceph_dentry(dentry);
+
+	ceph_put_mds_session(di->lease_session);
+	di->lease_session = NULL;
+}
+
+static void handle_lease(struct ceph_mds_client *mdsc,
+			 struct ceph_mds_session *session,
+			 struct ceph_msg *msg)
+{
+	struct super_block *sb = mdsc->client->sb;
+	struct inode *inode;
+	struct ceph_inode_info *ci;
+	struct dentry *parent, *dentry;
+	struct ceph_dentry_info *di;
+	int mds = session->s_mds;
+	struct ceph_mds_lease *h = msg->front.iov_base;
+	struct ceph_vino vino;
+	int mask;
+	struct qstr dname;
+	int release = 0;
+
+	dout("handle_lease from mds%d\n", mds);
+
+	/* decode */
+	if (msg->front.iov_len < sizeof(*h) + sizeof(u32))
+		goto bad;
+	vino.ino = le64_to_cpu(h->ino);
+	vino.snap = CEPH_NOSNAP;
+	mask = le16_to_cpu(h->mask);
+	dname.name = (void *)h + sizeof(*h) + sizeof(u32);
+	dname.len = msg->front.iov_len - sizeof(*h) - sizeof(u32);
+	if (dname.len != get_unaligned_le32(h+1))
+		goto bad;
+
+	mutex_lock(&session->s_mutex);
+	session->s_seq++;
+
+	/* lookup inode */
+	inode = ceph_find_inode(sb, vino);
+	dout("handle_lease '%s', mask %d, ino %llx %p\n",
+	     ceph_lease_op_name(h->action), mask, vino.ino, inode);
+	if (inode == NULL) {
+		dout("handle_lease no inode %llx\n", vino.ino);
+		goto release;
+	}
+	ci = ceph_inode(inode);
+
+	/* dentry */
+	parent = d_find_alias(inode);
+	if (!parent) {
+		dout("no parent dentry on inode %p\n", inode);
+		WARN_ON(1);
+		goto release;  /* hrm... */
+	}
+	dname.hash = full_name_hash(dname.name, dname.len);
+	dentry = d_lookup(parent, &dname);
+	dput(parent);
+	if (!dentry)
+		goto release;
+
+	spin_lock(&dentry->d_lock);
+	di = ceph_dentry(dentry);
+	switch (h->action) {
+	case CEPH_MDS_LEASE_REVOKE:
+		if (di && di->lease_session == session) {
+			h->seq = cpu_to_le32(di->lease_seq);
+			__ceph_mdsc_drop_dentry_lease(dentry);
+		}
+		release = 1;
+		break;
+
+	case CEPH_MDS_LEASE_RENEW:
+		if (di && di->lease_session == session &&
+		    di->lease_gen == session->s_cap_gen &&
+		    di->lease_renew_from &&
+		    di->lease_renew_after == 0) {
+			unsigned long duration =
+				le32_to_cpu(h->duration_ms) * HZ / 1000;
+
+			di->lease_seq = le32_to_cpu(h->seq);
+			dentry->d_time = di->lease_renew_from + duration;
+			di->lease_renew_after = di->lease_renew_from +
+				(duration >> 1);
+			di->lease_renew_from = 0;
+		}
+		break;
+	}
+	spin_unlock(&dentry->d_lock);
+	dput(dentry);
+
+	if (!release)
+		goto out;
+
+release:
+	/* let's just reuse the same message */
+	h->action = CEPH_MDS_LEASE_REVOKE_ACK;
+	ceph_msg_get(msg);
+	ceph_con_send(&session->s_con, msg);
+
+out:
+	iput(inode);
+	mutex_unlock(&session->s_mutex);
+	return;
+
+bad:
+	pr_err("corrupt lease message\n");
+	ceph_msg_dump(msg);
+}
+
+void ceph_mdsc_lease_send_msg(struct ceph_mds_session *session,
+			      struct inode *inode,
+			      struct dentry *dentry, char action,
+			      u32 seq)
+{
+	struct ceph_msg *msg;
+	struct ceph_mds_lease *lease;
+	int len = sizeof(*lease) + sizeof(u32);
+	int dnamelen = 0;
+
+	dout("lease_send_msg inode %p dentry %p %s to mds%d\n",
+	     inode, dentry, ceph_lease_op_name(action), session->s_mds);
+	dnamelen = dentry->d_name.len;
+	len += dnamelen;
+
+	msg = ceph_msg_new(CEPH_MSG_CLIENT_LEASE, len, 0, 0, NULL);
+	if (IS_ERR(msg))
+		return;
+	lease = msg->front.iov_base;
+	lease->action = action;
+	lease->mask = cpu_to_le16(CEPH_LOCK_DN);
+	lease->ino = cpu_to_le64(ceph_vino(inode).ino);
+	lease->first = lease->last = cpu_to_le64(ceph_vino(inode).snap);
+	lease->seq = cpu_to_le32(seq);
+	put_unaligned_le32(dnamelen, lease + 1);
+	memcpy((void *)(lease + 1) + 4, dentry->d_name.name, dnamelen);
+
+	/*
+	 * if this is a preemptive lease RELEASE, no need to
+	 * flush request stream, since the actual request will
+	 * soon follow.
+	 */
+	msg->more_to_follow = (action == CEPH_MDS_LEASE_RELEASE);
+
+	ceph_con_send(&session->s_con, msg);
+}
+
+/*
+ * Preemptively release a lease we expect to invalidate anyway.
+ * Pass @inode always, @dentry is optional.
+ */
+void ceph_mdsc_lease_release(struct ceph_mds_client *mdsc, struct inode *inode,
+			     struct dentry *dentry, int mask)
+{
+	struct ceph_dentry_info *di;
+	struct ceph_mds_session *session;
+	u32 seq;
+
+	BUG_ON(inode == NULL);
+	BUG_ON(dentry == NULL);
+	BUG_ON(mask != CEPH_LOCK_DN);
+
+	/* is dentry lease valid? */
+	spin_lock(&dentry->d_lock);
+	di = ceph_dentry(dentry);
+	if (!di || !di->lease_session ||
+	    di->lease_session->s_mds < 0 ||
+	    di->lease_gen != di->lease_session->s_cap_gen ||
+	    !time_before(jiffies, dentry->d_time)) {
+		dout("lease_release inode %p dentry %p -- "
+		     "no lease on %d\n",
+		     inode, dentry, mask);
+		spin_unlock(&dentry->d_lock);
+		return;
+	}
+
+	/* we do have a lease on this dentry; note mds and seq */
+	session = ceph_get_mds_session(di->lease_session);
+	seq = di->lease_seq;
+	__ceph_mdsc_drop_dentry_lease(dentry);
+	spin_unlock(&dentry->d_lock);
+
+	dout("lease_release inode %p dentry %p mask %d to mds%d\n",
+	     inode, dentry, mask, session->s_mds);
+	ceph_mdsc_lease_send_msg(session, inode, dentry,
+				 CEPH_MDS_LEASE_RELEASE, seq);
+	ceph_put_mds_session(session);
+}
+
+/*
+ * drop all leases (and dentry refs) in preparation for umount
+ */
+static void drop_leases(struct ceph_mds_client *mdsc)
+{
+	int i;
+
+	dout("drop_leases\n");
+	mutex_lock(&mdsc->mutex);
+	for (i = 0; i < mdsc->max_sessions; i++) {
+		struct ceph_mds_session *s = __ceph_lookup_mds_session(mdsc, i);
+		if (!s)
+			continue;
+		mutex_unlock(&mdsc->mutex);
+		mutex_lock(&s->s_mutex);
+		mutex_unlock(&s->s_mutex);
+		ceph_put_mds_session(s);
+		mutex_lock(&mdsc->mutex);
+	}
+	mutex_unlock(&mdsc->mutex);
+}
+
+
+
+/*
+ * delayed work -- periodically trim expired leases, renew caps with mds
+ */
+static void schedule_delayed(struct ceph_mds_client *mdsc)
+{
+	int delay = 5;
+	unsigned hz = round_jiffies_relative(HZ * delay);
+	schedule_delayed_work(&mdsc->delayed_work, hz);
+}
+
+static void delayed_work(struct work_struct *work)
+{
+	int i;
+	struct ceph_mds_client *mdsc =
+		container_of(work, struct ceph_mds_client, delayed_work.work);
+	int renew_interval;
+	int renew_caps;
+
+	dout("mdsc delayed_work\n");
+	ceph_check_delayed_caps(mdsc);
+
+	mutex_lock(&mdsc->mutex);
+	renew_interval = mdsc->mdsmap->m_session_timeout >> 2;
+	renew_caps = time_after_eq(jiffies, HZ*renew_interval +
+				   mdsc->last_renew_caps);
+	if (renew_caps)
+		mdsc->last_renew_caps = jiffies;
+
+	for (i = 0; i < mdsc->max_sessions; i++) {
+		struct ceph_mds_session *s = __ceph_lookup_mds_session(mdsc, i);
+		if (s == NULL)
+			continue;
+		if (s->s_state == CEPH_MDS_SESSION_CLOSING) {
+			dout("resending session close request for mds%d\n",
+			     s->s_mds);
+			request_close_session(mdsc, s);
+			ceph_put_mds_session(s);
+			continue;
+		}
+		if (s->s_ttl && time_after(jiffies, s->s_ttl)) {
+			if (s->s_state == CEPH_MDS_SESSION_OPEN) {
+				s->s_state = CEPH_MDS_SESSION_HUNG;
+				pr_info("mds%d hung\n", s->s_mds);
+			}
+		}
+		if (s->s_state < CEPH_MDS_SESSION_OPEN) {
+			/* this mds is failed or recovering, just wait */
+			ceph_put_mds_session(s);
+			continue;
+		}
+		mutex_unlock(&mdsc->mutex);
+
+		mutex_lock(&s->s_mutex);
+		if (renew_caps)
+			send_renew_caps(mdsc, s);
+		else
+			ceph_con_keepalive(&s->s_con);
+		add_cap_releases(mdsc, s, -1);
+		send_cap_releases(mdsc, s);
+		mutex_unlock(&s->s_mutex);
+		ceph_put_mds_session(s);
+
+		mutex_lock(&mdsc->mutex);
+	}
+	mutex_unlock(&mdsc->mutex);
+
+	schedule_delayed(mdsc);
+}
+
+
+int ceph_mdsc_init(struct ceph_mds_client *mdsc, struct ceph_client *client)
+{
+	mdsc->client = client;
+	mutex_init(&mdsc->mutex);
+	mdsc->mdsmap = kzalloc(sizeof(*mdsc->mdsmap), GFP_NOFS);
+	init_completion(&mdsc->safe_umount_waiters);
+	init_completion(&mdsc->session_close_waiters);
+	INIT_LIST_HEAD(&mdsc->waiting_for_map);
+	mdsc->sessions = NULL;
+	mdsc->max_sessions = 0;
+	mdsc->stopping = 0;
+	init_rwsem(&mdsc->snap_rwsem);
+	mdsc->snap_realms = RB_ROOT;
+	INIT_LIST_HEAD(&mdsc->snap_empty);
+	spin_lock_init(&mdsc->snap_empty_lock);
+	mdsc->last_tid = 0;
+	mdsc->request_tree = RB_ROOT;
+	INIT_DELAYED_WORK(&mdsc->delayed_work, delayed_work);
+	mdsc->last_renew_caps = jiffies;
+	INIT_LIST_HEAD(&mdsc->cap_delay_list);
+	spin_lock_init(&mdsc->cap_delay_lock);
+	INIT_LIST_HEAD(&mdsc->snap_flush_list);
+	spin_lock_init(&mdsc->snap_flush_lock);
+	mdsc->cap_flush_seq = 0;
+	INIT_LIST_HEAD(&mdsc->cap_dirty);
+	mdsc->num_cap_flushing = 0;
+	spin_lock_init(&mdsc->cap_dirty_lock);
+	init_waitqueue_head(&mdsc->cap_flushing_wq);
+	spin_lock_init(&mdsc->dentry_lru_lock);
+	INIT_LIST_HEAD(&mdsc->dentry_lru);
+	return 0;
+}
+
+/*
+ * Wait for safe replies on open mds requests.  If we time out, drop
+ * all requests from the tree to avoid dangling dentry refs.
+ */
+static void wait_requests(struct ceph_mds_client *mdsc)
+{
+	struct ceph_mds_request *req;
+	struct ceph_client *client = mdsc->client;
+
+	mutex_lock(&mdsc->mutex);
+	if (__get_oldest_req(mdsc)) {
+		mutex_unlock(&mdsc->mutex);
+
+		dout("wait_requests waiting for requests\n");
+		wait_for_completion_timeout(&mdsc->safe_umount_waiters,
+				    client->mount_args->mount_timeout * HZ);
+
+		/* tear down remaining requests */
+		mutex_lock(&mdsc->mutex);
+		while ((req = __get_oldest_req(mdsc))) {
+			dout("wait_requests timed out on tid %llu\n",
+			     req->r_tid);
+			__unregister_request(mdsc, req);
+		}
+	}
+	mutex_unlock(&mdsc->mutex);
+	dout("wait_requests done\n");
+}
+
+/*
+ * called before mount is ro, and before dentries are torn down.
+ * (hmm, does this still race with new lookups?)
+ */
+void ceph_mdsc_pre_umount(struct ceph_mds_client *mdsc)
+{
+	dout("pre_umount\n");
+	mdsc->stopping = 1;
+
+	drop_leases(mdsc);
+	ceph_flush_dirty_caps(mdsc);
+	wait_requests(mdsc);
+}
+
+/*
+ * wait for all write mds requests to flush.
+ */
+static void wait_unsafe_requests(struct ceph_mds_client *mdsc, u64 want_tid)
+{
+	struct ceph_mds_request *req = NULL;
+	struct rb_node *n;
+
+	mutex_lock(&mdsc->mutex);
+	dout("wait_unsafe_requests want %lld\n", want_tid);
+	req = __get_oldest_req(mdsc);
+	while (req && req->r_tid <= want_tid) {
+		if ((req->r_op & CEPH_MDS_OP_WRITE)) {
+			/* write op */
+			ceph_mdsc_get_request(req);
+			mutex_unlock(&mdsc->mutex);
+			dout("wait_unsafe_requests  wait on %llu (want %llu)\n",
+			     req->r_tid, want_tid);
+			wait_for_completion(&req->r_safe_completion);
+			mutex_lock(&mdsc->mutex);
+			n = rb_next(&req->r_node);
+			ceph_mdsc_put_request(req);
+		} else {
+			n = rb_next(&req->r_node);
+		}
+		if (!n)
+			break;
+		req = rb_entry(n, struct ceph_mds_request, r_node);
+	}
+	mutex_unlock(&mdsc->mutex);
+	dout("wait_unsafe_requests done\n");
+}
+
+void ceph_mdsc_sync(struct ceph_mds_client *mdsc)
+{
+	u64 want_tid, want_flush;
+
+	dout("sync\n");
+	mutex_lock(&mdsc->mutex);
+	want_tid = mdsc->last_tid;
+	want_flush = mdsc->cap_flush_seq;
+	mutex_unlock(&mdsc->mutex);
+	dout("sync want tid %lld flush_seq %lld\n", want_tid, want_flush);
+
+	ceph_flush_dirty_caps(mdsc);
+
+	wait_unsafe_requests(mdsc, want_tid);
+	wait_event(mdsc->cap_flushing_wq, check_cap_flush(mdsc, want_flush));
+}
+
+
+/*
+ * called after sb is ro.
+ */
+void ceph_mdsc_close_sessions(struct ceph_mds_client *mdsc)
+{
+	struct ceph_mds_session *session;
+	int i;
+	int n;
+	struct ceph_client *client = mdsc->client;
+	unsigned long started, timeout = client->mount_args->mount_timeout * HZ;
+
+	dout("close_sessions\n");
+
+	mutex_lock(&mdsc->mutex);
+
+	/* close sessions */
+	started = jiffies;
+	while (time_before(jiffies, started + timeout)) {
+		dout("closing sessions\n");
+		n = 0;
+		for (i = 0; i < mdsc->max_sessions; i++) {
+			session = __ceph_lookup_mds_session(mdsc, i);
+			if (!session)
+				continue;
+			mutex_unlock(&mdsc->mutex);
+			mutex_lock(&session->s_mutex);
+			__close_session(mdsc, session);
+			mutex_unlock(&session->s_mutex);
+			ceph_put_mds_session(session);
+			mutex_lock(&mdsc->mutex);
+			n++;
+		}
+		if (n == 0)
+			break;
+
+		if (client->mount_state == CEPH_MOUNT_SHUTDOWN)
+			break;
+
+		dout("waiting for sessions to close\n");
+		mutex_unlock(&mdsc->mutex);
+		wait_for_completion_timeout(&mdsc->session_close_waiters,
+					    timeout);
+		mutex_lock(&mdsc->mutex);
+	}
+
+	/* tear down remaining sessions */
+	for (i = 0; i < mdsc->max_sessions; i++) {
+		if (mdsc->sessions[i]) {
+			session = get_session(mdsc->sessions[i]);
+			__unregister_session(mdsc, session);
+			mutex_unlock(&mdsc->mutex);
+			mutex_lock(&session->s_mutex);
+			remove_session_caps(session);
+			mutex_unlock(&session->s_mutex);
+			ceph_put_mds_session(session);
+			mutex_lock(&mdsc->mutex);
+		}
+	}
+
+	WARN_ON(!list_empty(&mdsc->cap_delay_list));
+
+	mutex_unlock(&mdsc->mutex);
+
+	ceph_cleanup_empty_realms(mdsc);
+
+	cancel_delayed_work_sync(&mdsc->delayed_work); /* cancel timer */
+
+	dout("stopped\n");
+}
+
+void ceph_mdsc_stop(struct ceph_mds_client *mdsc)
+{
+	dout("stop\n");
+	cancel_delayed_work_sync(&mdsc->delayed_work); /* cancel timer */
+	if (mdsc->mdsmap)
+		ceph_mdsmap_destroy(mdsc->mdsmap);
+	kfree(mdsc->sessions);
+}
+
+
+/*
+ * handle mds map update.
+ */
+void ceph_mdsc_handle_map(struct ceph_mds_client *mdsc, struct ceph_msg *msg)
+{
+	u32 epoch;
+	u32 maplen;
+	void *p = msg->front.iov_base;
+	void *end = p + msg->front.iov_len;
+	struct ceph_mdsmap *newmap, *oldmap;
+	struct ceph_fsid fsid;
+	int err = -EINVAL;
+
+	ceph_decode_need(&p, end, sizeof(fsid)+2*sizeof(u32), bad);
+	ceph_decode_copy(&p, &fsid, sizeof(fsid));
+	if (ceph_check_fsid(mdsc->client, &fsid) < 0)
+		return;
+	epoch = ceph_decode_32(&p);
+	maplen = ceph_decode_32(&p);
+	dout("handle_map epoch %u len %d\n", epoch, (int)maplen);
+
+	/* do we need it? */
+	ceph_monc_got_mdsmap(&mdsc->client->monc, epoch);
+	mutex_lock(&mdsc->mutex);
+	if (mdsc->mdsmap && epoch <= mdsc->mdsmap->m_epoch) {
+		dout("handle_map epoch %u <= our %u\n",
+		     epoch, mdsc->mdsmap->m_epoch);
+		mutex_unlock(&mdsc->mutex);
+		return;
+	}
+
+	newmap = ceph_mdsmap_decode(&p, end);
+	if (IS_ERR(newmap)) {
+		err = PTR_ERR(newmap);
+		goto bad_unlock;
+	}
+
+	/* swap into place */
+	if (mdsc->mdsmap) {
+		oldmap = mdsc->mdsmap;
+		mdsc->mdsmap = newmap;
+		check_new_map(mdsc, newmap, oldmap);
+		ceph_mdsmap_destroy(oldmap);
+	} else {
+		mdsc->mdsmap = newmap;  /* first mds map */
+	}
+	mdsc->client->sb->s_maxbytes = mdsc->mdsmap->m_max_file_size;
+
+	__wake_requests(mdsc, &mdsc->waiting_for_map);
+
+	mutex_unlock(&mdsc->mutex);
+	schedule_delayed(mdsc);
+	return;
+
+bad_unlock:
+	mutex_unlock(&mdsc->mutex);
+bad:
+	pr_err("error decoding mdsmap %d\n", err);
+	return;
+}
+
+static struct ceph_connection *con_get(struct ceph_connection *con)
+{
+	struct ceph_mds_session *s = con->private;
+
+	if (get_session(s)) {
+		dout("mdsc con_get %p ok (%d)\n", s, atomic_read(&s->s_ref));
+		return con;
+	}
+	dout("mdsc con_get %p FAIL\n", s);
+	return NULL;
+}
+
+static void con_put(struct ceph_connection *con)
+{
+	struct ceph_mds_session *s = con->private;
+
+	ceph_put_mds_session(s);
+	dout("mdsc con_put %p (%d)\n", s, atomic_read(&s->s_ref));
+}
+
+/*
+ * if the client is unresponsive for long enough, the mds will kill
+ * the session entirely.
+ */
+static void peer_reset(struct ceph_connection *con)
+{
+	struct ceph_mds_session *s = con->private;
+
+	pr_err("mds%d gave us the boot.  IMPLEMENT RECONNECT.\n",
+	       s->s_mds);
+}
+
+static void dispatch(struct ceph_connection *con, struct ceph_msg *msg)
+{
+	struct ceph_mds_session *s = con->private;
+	struct ceph_mds_client *mdsc = s->s_mdsc;
+	int type = le16_to_cpu(msg->hdr.type);
+
+	mutex_lock(&mdsc->mutex);
+	if (__verify_registered_session(mdsc, s) < 0) {
+		mutex_unlock(&mdsc->mutex);
+		goto out;
+	}
+	mutex_unlock(&mdsc->mutex);
+
+	switch (type) {
+	case CEPH_MSG_MDS_MAP:
+		ceph_mdsc_handle_map(mdsc, msg);
+		break;
+	case CEPH_MSG_CLIENT_SESSION:
+		handle_session(s, msg);
+		break;
+	case CEPH_MSG_CLIENT_REPLY:
+		handle_reply(s, msg);
+		break;
+	case CEPH_MSG_CLIENT_REQUEST_FORWARD:
+		handle_forward(mdsc, s, msg);
+		break;
+	case CEPH_MSG_CLIENT_CAPS:
+		ceph_handle_caps(s, msg);
+		break;
+	case CEPH_MSG_CLIENT_SNAP:
+		ceph_handle_snap(mdsc, s, msg);
+		break;
+	case CEPH_MSG_CLIENT_LEASE:
+		handle_lease(mdsc, s, msg);
+		break;
+
+	default:
+		pr_err("received unknown message type %d %s\n", type,
+		       ceph_msg_type_name(type));
+	}
+out:
+	ceph_msg_put(msg);
+}
+
+/*
+ * authentication
+ */
+static int get_authorizer(struct ceph_connection *con,
+			  void **buf, int *len, int *proto,
+			  void **reply_buf, int *reply_len, int force_new)
+{
+	struct ceph_mds_session *s = con->private;
+	struct ceph_mds_client *mdsc = s->s_mdsc;
+	struct ceph_auth_client *ac = mdsc->client->monc.auth;
+	int ret = 0;
+
+	if (force_new && s->s_authorizer) {
+		ac->ops->destroy_authorizer(ac, s->s_authorizer);
+		s->s_authorizer = NULL;
+	}
+	if (s->s_authorizer == NULL) {
+		if (ac->ops->create_authorizer) {
+			ret = ac->ops->create_authorizer(
+				ac, CEPH_ENTITY_TYPE_MDS,
+				&s->s_authorizer,
+				&s->s_authorizer_buf,
+				&s->s_authorizer_buf_len,
+				&s->s_authorizer_reply_buf,
+				&s->s_authorizer_reply_buf_len);
+			if (ret)
+				return ret;
+		}
+	}
+
+	*proto = ac->protocol;
+	*buf = s->s_authorizer_buf;
+	*len = s->s_authorizer_buf_len;
+	*reply_buf = s->s_authorizer_reply_buf;
+	*reply_len = s->s_authorizer_reply_buf_len;
+	return 0;
+}
+
+
+static int verify_authorizer_reply(struct ceph_connection *con, int len)
+{
+	struct ceph_mds_session *s = con->private;
+	struct ceph_mds_client *mdsc = s->s_mdsc;
+	struct ceph_auth_client *ac = mdsc->client->monc.auth;
+
+	return ac->ops->verify_authorizer_reply(ac, s->s_authorizer, len);
+}
+
+static int invalidate_authorizer(struct ceph_connection *con)
+{
+	struct ceph_mds_session *s = con->private;
+	struct ceph_mds_client *mdsc = s->s_mdsc;
+	struct ceph_auth_client *ac = mdsc->client->monc.auth;
+
+	if (ac->ops->invalidate_authorizer)
+		ac->ops->invalidate_authorizer(ac, CEPH_ENTITY_TYPE_MDS);
+
+	return ceph_monc_validate_auth(&mdsc->client->monc);
+}
+
+const static struct ceph_connection_operations mds_con_ops = {
+	.get = con_get,
+	.put = con_put,
+	.dispatch = dispatch,
+	.get_authorizer = get_authorizer,
+	.verify_authorizer_reply = verify_authorizer_reply,
+	.invalidate_authorizer = invalidate_authorizer,
+	.peer_reset = peer_reset,
+};
+
+
+
+
+/* eof */
diff --git a/fs/ceph/mds_client.h b/fs/ceph/mds_client.h
new file mode 100644
index 000000000000..961cc6f65878
--- /dev/null
+++ b/fs/ceph/mds_client.h
@@ -0,0 +1,335 @@
+#ifndef _FS_CEPH_MDS_CLIENT_H
+#define _FS_CEPH_MDS_CLIENT_H
+
+#include <linux/completion.h>
+#include <linux/kref.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/rbtree.h>
+#include <linux/spinlock.h>
+
+#include "types.h"
+#include "messenger.h"
+#include "mdsmap.h"
+
+/*
+ * Some lock dependencies:
+ *
+ * session->s_mutex
+ *         mdsc->mutex
+ *
+ *         mdsc->snap_rwsem
+ *
+ *         inode->i_lock
+ *                 mdsc->snap_flush_lock
+ *                 mdsc->cap_delay_lock
+ *
+ */
+
+struct ceph_client;
+struct ceph_cap;
+
+/*
+ * parsed info about a single inode.  pointers are into the encoded
+ * on-wire structures within the mds reply message payload.
+ */
+struct ceph_mds_reply_info_in {
+	struct ceph_mds_reply_inode *in;
+	u32 symlink_len;
+	char *symlink;
+	u32 xattr_len;
+	char *xattr_data;
+};
+
+/*
+ * parsed info about an mds reply, including information about the
+ * target inode and/or its parent directory and dentry, and directory
+ * contents (for readdir results).
+ */
+struct ceph_mds_reply_info_parsed {
+	struct ceph_mds_reply_head    *head;
+
+	struct ceph_mds_reply_info_in diri, targeti;
+	struct ceph_mds_reply_dirfrag *dirfrag;
+	char                          *dname;
+	u32                           dname_len;
+	struct ceph_mds_reply_lease   *dlease;
+
+	struct ceph_mds_reply_dirfrag *dir_dir;
+	int                           dir_nr;
+	char                          **dir_dname;
+	u32                           *dir_dname_len;
+	struct ceph_mds_reply_lease   **dir_dlease;
+	struct ceph_mds_reply_info_in *dir_in;
+	u8                            dir_complete, dir_end;
+
+	/* encoded blob describing snapshot contexts for certain
+	   operations (e.g., open) */
+	void *snapblob;
+	int snapblob_len;
+};
+
+
+/*
+ * cap releases are batched and sent to the MDS en masse.
+ */
+#define CEPH_CAPS_PER_RELEASE ((PAGE_CACHE_SIZE -			\
+				sizeof(struct ceph_mds_cap_release)) /	\
+			       sizeof(struct ceph_mds_cap_item))
+
+
+/*
+ * state associated with each MDS<->client session
+ */
+enum {
+	CEPH_MDS_SESSION_NEW = 1,
+	CEPH_MDS_SESSION_OPENING = 2,
+	CEPH_MDS_SESSION_OPEN = 3,
+	CEPH_MDS_SESSION_HUNG = 4,
+	CEPH_MDS_SESSION_CLOSING = 5,
+	CEPH_MDS_SESSION_RESTARTING = 6,
+	CEPH_MDS_SESSION_RECONNECTING = 7,
+};
+
+struct ceph_mds_session {
+	struct ceph_mds_client *s_mdsc;
+	int               s_mds;
+	int               s_state;
+	unsigned long     s_ttl;      /* time until mds kills us */
+	u64               s_seq;      /* incoming msg seq # */
+	struct mutex      s_mutex;    /* serialize session messages */
+
+	struct ceph_connection s_con;
+
+	struct ceph_authorizer *s_authorizer;
+	void             *s_authorizer_buf, *s_authorizer_reply_buf;
+	size_t            s_authorizer_buf_len, s_authorizer_reply_buf_len;
+
+	/* protected by s_cap_lock */
+	spinlock_t        s_cap_lock;
+	u32               s_cap_gen;  /* inc each time we get mds stale msg */
+	unsigned long     s_cap_ttl;  /* when session caps expire */
+	struct list_head  s_caps;     /* all caps issued by this session */
+	int               s_nr_caps, s_trim_caps;
+	int               s_num_cap_releases;
+	struct list_head  s_cap_releases; /* waiting cap_release messages */
+	struct list_head  s_cap_releases_done; /* ready to send */
+	struct ceph_cap  *s_cap_iterator;
+
+	/* protected by mutex */
+	struct list_head  s_cap_flushing;     /* inodes w/ flushing caps */
+	struct list_head  s_cap_snaps_flushing;
+	unsigned long     s_renew_requested; /* last time we sent a renew req */
+	u64               s_renew_seq;
+
+	atomic_t          s_ref;
+	struct list_head  s_waiting;  /* waiting requests */
+	struct list_head  s_unsafe;   /* unsafe requests */
+};
+
+/*
+ * modes of choosing which MDS to send a request to
+ */
+enum {
+	USE_ANY_MDS,
+	USE_RANDOM_MDS,
+	USE_AUTH_MDS,   /* prefer authoritative mds for this metadata item */
+};
+
+struct ceph_mds_request;
+struct ceph_mds_client;
+
+/*
+ * request completion callback
+ */
+typedef void (*ceph_mds_request_callback_t) (struct ceph_mds_client *mdsc,
+					     struct ceph_mds_request *req);
+
+/*
+ * an in-flight mds request
+ */
+struct ceph_mds_request {
+	u64 r_tid;                   /* transaction id */
+	struct rb_node r_node;
+
+	int r_op;                    /* mds op code */
+	int r_mds;
+
+	/* operation on what? */
+	struct inode *r_inode;              /* arg1 */
+	struct dentry *r_dentry;            /* arg1 */
+	struct dentry *r_old_dentry;        /* arg2: rename from or link from */
+	char *r_path1, *r_path2;
+	struct ceph_vino r_ino1, r_ino2;
+
+	struct inode *r_locked_dir; /* dir (if any) i_mutex locked by vfs */
+	struct inode *r_target_inode;       /* resulting inode */
+
+	union ceph_mds_request_args r_args;
+	int r_fmode;        /* file mode, if expecting cap */
+
+	/* for choosing which mds to send this request to */
+	int r_direct_mode;
+	u32 r_direct_hash;      /* choose dir frag based on this dentry hash */
+	bool r_direct_is_hash;  /* true if r_direct_hash is valid */
+
+	/* data payload is used for xattr ops */
+	struct page **r_pages;
+	int r_num_pages;
+	int r_data_len;
+
+	/* what caps shall we drop? */
+	int r_inode_drop, r_inode_unless;
+	int r_dentry_drop, r_dentry_unless;
+	int r_old_dentry_drop, r_old_dentry_unless;
+	struct inode *r_old_inode;
+	int r_old_inode_drop, r_old_inode_unless;
+
+	struct ceph_msg  *r_request;  /* original request */
+	struct ceph_msg  *r_reply;
+	struct ceph_mds_reply_info_parsed r_reply_info;
+	int r_err;
+	bool r_aborted;
+
+	unsigned long r_timeout;  /* optional.  jiffies */
+	unsigned long r_started;  /* start time to measure timeout against */
+	unsigned long r_request_started; /* start time for mds request only,
+					    used to measure lease durations */
+
+	/* link unsafe requests to parent directory, for fsync */
+	struct inode	*r_unsafe_dir;
+	struct list_head r_unsafe_dir_item;
+
+	struct ceph_mds_session *r_session;
+
+	int               r_attempts;   /* resend attempts */
+	int               r_num_fwd;    /* number of forward attempts */
+	int               r_num_stale;
+	int               r_resend_mds; /* mds to resend to next, if any*/
+
+	struct kref       r_kref;
+	struct list_head  r_wait;
+	struct completion r_completion;
+	struct completion r_safe_completion;
+	ceph_mds_request_callback_t r_callback;
+	struct list_head  r_unsafe_item;  /* per-session unsafe list item */
+	bool		  r_got_unsafe, r_got_safe;
+
+	bool              r_did_prepopulate;
+	u32               r_readdir_offset;
+
+	struct ceph_cap_reservation r_caps_reservation;
+	int r_num_caps;
+};
+
+/*
+ * mds client state
+ */
+struct ceph_mds_client {
+	struct ceph_client      *client;
+	struct mutex            mutex;         /* all nested structures */
+
+	struct ceph_mdsmap      *mdsmap;
+	struct completion       safe_umount_waiters, session_close_waiters;
+	struct list_head        waiting_for_map;
+
+	struct ceph_mds_session **sessions;    /* NULL for mds if no session */
+	int                     max_sessions;  /* len of s_mds_sessions */
+	int                     stopping;      /* true if shutting down */
+
+	/*
+	 * snap_rwsem will cover cap linkage into snaprealms, and
+	 * realm snap contexts.  (later, we can do per-realm snap
+	 * contexts locks..)  the empty list contains realms with no
+	 * references (implying they contain no inodes with caps) that
+	 * should be destroyed.
+	 */
+	struct rw_semaphore     snap_rwsem;
+	struct rb_root          snap_realms;
+	struct list_head        snap_empty;
+	spinlock_t              snap_empty_lock;  /* protect snap_empty */
+
+	u64                    last_tid;      /* most recent mds request */
+	struct rb_root         request_tree;  /* pending mds requests */
+	struct delayed_work    delayed_work;  /* delayed work */
+	unsigned long    last_renew_caps;  /* last time we renewed our caps */
+	struct list_head cap_delay_list;   /* caps with delayed release */
+	spinlock_t       cap_delay_lock;   /* protects cap_delay_list */
+	struct list_head snap_flush_list;  /* cap_snaps ready to flush */
+	spinlock_t       snap_flush_lock;
+
+	u64               cap_flush_seq;
+	struct list_head  cap_dirty;        /* inodes with dirty caps */
+	int               num_cap_flushing; /* # caps we are flushing */
+	spinlock_t        cap_dirty_lock;   /* protects above items */
+	wait_queue_head_t cap_flushing_wq;
+
+#ifdef CONFIG_DEBUG_FS
+	struct dentry 	  *debugfs_file;
+#endif
+
+	spinlock_t	  dentry_lru_lock;
+	struct list_head  dentry_lru;
+	int		  num_dentry;
+};
+
+extern const char *ceph_mds_op_name(int op);
+
+extern struct ceph_mds_session *
+__ceph_lookup_mds_session(struct ceph_mds_client *, int mds);
+
+static inline struct ceph_mds_session *
+ceph_get_mds_session(struct ceph_mds_session *s)
+{
+	atomic_inc(&s->s_ref);
+	return s;
+}
+
+extern void ceph_put_mds_session(struct ceph_mds_session *s);
+
+extern int ceph_send_msg_mds(struct ceph_mds_client *mdsc,
+			     struct ceph_msg *msg, int mds);
+
+extern int ceph_mdsc_init(struct ceph_mds_client *mdsc,
+			   struct ceph_client *client);
+extern void ceph_mdsc_close_sessions(struct ceph_mds_client *mdsc);
+extern void ceph_mdsc_stop(struct ceph_mds_client *mdsc);
+
+extern void ceph_mdsc_sync(struct ceph_mds_client *mdsc);
+
+extern void ceph_mdsc_lease_release(struct ceph_mds_client *mdsc,
+				    struct inode *inode,
+				    struct dentry *dn, int mask);
+
+extern struct ceph_mds_request *
+ceph_mdsc_create_request(struct ceph_mds_client *mdsc, int op, int mode);
+extern void ceph_mdsc_submit_request(struct ceph_mds_client *mdsc,
+				     struct ceph_mds_request *req);
+extern int ceph_mdsc_do_request(struct ceph_mds_client *mdsc,
+				struct inode *dir,
+				struct ceph_mds_request *req);
+static inline void ceph_mdsc_get_request(struct ceph_mds_request *req)
+{
+	kref_get(&req->r_kref);
+}
+extern void ceph_mdsc_release_request(struct kref *kref);
+static inline void ceph_mdsc_put_request(struct ceph_mds_request *req)
+{
+	kref_put(&req->r_kref, ceph_mdsc_release_request);
+}
+
+extern void ceph_mdsc_pre_umount(struct ceph_mds_client *mdsc);
+
+extern char *ceph_mdsc_build_path(struct dentry *dentry, int *plen, u64 *base,
+				  int stop_on_nosnap);
+
+extern void __ceph_mdsc_drop_dentry_lease(struct dentry *dentry);
+extern void ceph_mdsc_lease_send_msg(struct ceph_mds_session *session,
+				     struct inode *inode,
+				     struct dentry *dentry, char action,
+				     u32 seq);
+
+extern void ceph_mdsc_handle_map(struct ceph_mds_client *mdsc,
+				 struct ceph_msg *msg);
+
+#endif
diff --git a/fs/ceph/mdsmap.c b/fs/ceph/mdsmap.c
new file mode 100644
index 000000000000..c4c498e6dfef
--- /dev/null
+++ b/fs/ceph/mdsmap.c
@@ -0,0 +1,174 @@
+#include "ceph_debug.h"
+
+#include <linux/bug.h>
+#include <linux/err.h>
+#include <linux/random.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#include "mdsmap.h"
+#include "messenger.h"
+#include "decode.h"
+
+#include "super.h"
+
+
+/*
+ * choose a random mds that is "up" (i.e. has a state > 0), or -1.
+ */
+int ceph_mdsmap_get_random_mds(struct ceph_mdsmap *m)
+{
+	int n = 0;
+	int i;
+	char r;
+
+	/* count */
+	for (i = 0; i < m->m_max_mds; i++)
+		if (m->m_info[i].state > 0)
+			n++;
+	if (n == 0)
+		return -1;
+
+	/* pick */
+	get_random_bytes(&r, 1);
+	n = r % n;
+	i = 0;
+	for (i = 0; n > 0; i++, n--)
+		while (m->m_info[i].state <= 0)
+			i++;
+
+	return i;
+}
+
+/*
+ * Decode an MDS map
+ *
+ * Ignore any fields we don't care about (there are quite a few of
+ * them).
+ */
+struct ceph_mdsmap *ceph_mdsmap_decode(void **p, void *end)
+{
+	struct ceph_mdsmap *m;
+	const void *start = *p;
+	int i, j, n;
+	int err = -EINVAL;
+	u16 version;
+
+	m = kzalloc(sizeof(*m), GFP_NOFS);
+	if (m == NULL)
+		return ERR_PTR(-ENOMEM);
+
+	ceph_decode_16_safe(p, end, version, bad);
+
+	ceph_decode_need(p, end, 8*sizeof(u32) + sizeof(u64), bad);
+	m->m_epoch = ceph_decode_32(p);
+	m->m_client_epoch = ceph_decode_32(p);
+	m->m_last_failure = ceph_decode_32(p);
+	m->m_root = ceph_decode_32(p);
+	m->m_session_timeout = ceph_decode_32(p);
+	m->m_session_autoclose = ceph_decode_32(p);
+	m->m_max_file_size = ceph_decode_64(p);
+	m->m_max_mds = ceph_decode_32(p);
+
+	m->m_info = kcalloc(m->m_max_mds, sizeof(*m->m_info), GFP_NOFS);
+	if (m->m_info == NULL)
+		goto badmem;
+
+	/* pick out active nodes from mds_info (state > 0) */
+	n = ceph_decode_32(p);
+	for (i = 0; i < n; i++) {
+		u64 global_id;
+		u32 namelen;
+		s32 mds, inc, state;
+		u64 state_seq;
+		u8 infoversion;
+		struct ceph_entity_addr addr;
+		u32 num_export_targets;
+		void *pexport_targets = NULL;
+
+		ceph_decode_need(p, end, sizeof(u64)*2 + 1 + sizeof(u32), bad);
+		global_id = ceph_decode_64(p);
+		infoversion = ceph_decode_8(p);
+		*p += sizeof(u64);
+		namelen = ceph_decode_32(p);  /* skip mds name */
+		*p += namelen;
+
+		ceph_decode_need(p, end,
+				 4*sizeof(u32) + sizeof(u64) +
+				 sizeof(addr) + sizeof(struct ceph_timespec),
+				 bad);
+		mds = ceph_decode_32(p);
+		inc = ceph_decode_32(p);
+		state = ceph_decode_32(p);
+		state_seq = ceph_decode_64(p);
+		ceph_decode_copy(p, &addr, sizeof(addr));
+		ceph_decode_addr(&addr);
+		*p += sizeof(struct ceph_timespec);
+		*p += sizeof(u32);
+		ceph_decode_32_safe(p, end, namelen, bad);
+		*p += namelen;
+		if (infoversion >= 2) {
+			ceph_decode_32_safe(p, end, num_export_targets, bad);
+			pexport_targets = *p;
+			*p += num_export_targets * sizeof(u32);
+		} else {
+			num_export_targets = 0;
+		}
+
+		dout("mdsmap_decode %d/%d %lld mds%d.%d %s %s\n",
+		     i+1, n, global_id, mds, inc, pr_addr(&addr.in_addr),
+		     ceph_mds_state_name(state));
+		if (mds >= 0 && mds < m->m_max_mds && state > 0) {
+			m->m_info[mds].global_id = global_id;
+			m->m_info[mds].state = state;
+			m->m_info[mds].addr = addr;
+			m->m_info[mds].num_export_targets = num_export_targets;
+			if (num_export_targets) {
+				m->m_info[mds].export_targets =
+					kcalloc(num_export_targets, sizeof(u32),
+						GFP_NOFS);
+				for (j = 0; j < num_export_targets; j++)
+					m->m_info[mds].export_targets[j] =
+					       ceph_decode_32(&pexport_targets);
+			} else {
+				m->m_info[mds].export_targets = NULL;
+			}
+		}
+	}
+
+	/* pg_pools */
+	ceph_decode_32_safe(p, end, n, bad);
+	m->m_num_data_pg_pools = n;
+	m->m_data_pg_pools = kcalloc(n, sizeof(u32), GFP_NOFS);
+	if (!m->m_data_pg_pools)
+		goto badmem;
+	ceph_decode_need(p, end, sizeof(u32)*(n+1), bad);
+	for (i = 0; i < n; i++)
+		m->m_data_pg_pools[i] = ceph_decode_32(p);
+	m->m_cas_pg_pool = ceph_decode_32(p);
+
+	/* ok, we don't care about the rest. */
+	dout("mdsmap_decode success epoch %u\n", m->m_epoch);
+	return m;
+
+badmem:
+	err = -ENOMEM;
+bad:
+	pr_err("corrupt mdsmap\n");
+	print_hex_dump(KERN_DEBUG, "mdsmap: ",
+		       DUMP_PREFIX_OFFSET, 16, 1,
+		       start, end - start, true);
+	ceph_mdsmap_destroy(m);
+	return ERR_PTR(-EINVAL);
+}
+
+void ceph_mdsmap_destroy(struct ceph_mdsmap *m)
+{
+	int i;
+
+	for (i = 0; i < m->m_max_mds; i++)
+		kfree(m->m_info[i].export_targets);
+	kfree(m->m_info);
+	kfree(m->m_data_pg_pools);
+	kfree(m);
+}
diff --git a/fs/ceph/mdsmap.h b/fs/ceph/mdsmap.h
new file mode 100644
index 000000000000..eacc131aa5cb
--- /dev/null
+++ b/fs/ceph/mdsmap.h
@@ -0,0 +1,54 @@
+#ifndef _FS_CEPH_MDSMAP_H
+#define _FS_CEPH_MDSMAP_H
+
+#include "types.h"
+
+/*
+ * mds map - describe servers in the mds cluster.
+ *
+ * we limit fields to those the client actually xcares about
+ */
+struct ceph_mds_info {
+	u64 global_id;
+	struct ceph_entity_addr addr;
+	s32 state;
+	int num_export_targets;
+	u32 *export_targets;
+};
+
+struct ceph_mdsmap {
+	u32 m_epoch, m_client_epoch, m_last_failure;
+	u32 m_root;
+	u32 m_session_timeout;          /* seconds */
+	u32 m_session_autoclose;        /* seconds */
+	u64 m_max_file_size;
+	u32 m_max_mds;                  /* size of m_addr, m_state arrays */
+	struct ceph_mds_info *m_info;
+
+	/* which object pools file data can be stored in */
+	int m_num_data_pg_pools;
+	u32 *m_data_pg_pools;
+	u32 m_cas_pg_pool;
+};
+
+static inline struct ceph_entity_addr *
+ceph_mdsmap_get_addr(struct ceph_mdsmap *m, int w)
+{
+	if (w >= m->m_max_mds)
+		return NULL;
+	return &m->m_info[w].addr;
+}
+
+static inline int ceph_mdsmap_get_state(struct ceph_mdsmap *m, int w)
+{
+	BUG_ON(w < 0);
+	if (w >= m->m_max_mds)
+		return CEPH_MDS_STATE_DNE;
+	return m->m_info[w].state;
+}
+
+extern int ceph_mdsmap_get_random_mds(struct ceph_mdsmap *m);
+extern struct ceph_mdsmap *ceph_mdsmap_decode(void **p, void *end);
+extern void ceph_mdsmap_destroy(struct ceph_mdsmap *m);
+
+#endif
diff --git a/fs/ceph/messenger.c b/fs/ceph/messenger.c
new file mode 100644
index 000000000000..781656a49bf8
--- /dev/null
+++ b/fs/ceph/messenger.c
@@ -0,0 +1,2240 @@
+#include "ceph_debug.h"
+
+#include <linux/crc32c.h>
+#include <linux/ctype.h>
+#include <linux/highmem.h>
+#include <linux/inet.h>
+#include <linux/kthread.h>
+#include <linux/net.h>
+#include <linux/socket.h>
+#include <linux/string.h>
+#include <net/tcp.h>
+
+#include "super.h"
+#include "messenger.h"
+#include "decode.h"
+#include "pagelist.h"
+
+/*
+ * Ceph uses the messenger to exchange ceph_msg messages with other
+ * hosts in the system.  The messenger provides ordered and reliable
+ * delivery.  We tolerate TCP disconnects by reconnecting (with
+ * exponential backoff) in the case of a fault (disconnection, bad
+ * crc, protocol error).  Acks allow sent messages to be discarded by
+ * the sender.
+ */
+
+/* static tag bytes (protocol control messages) */
+static char tag_msg = CEPH_MSGR_TAG_MSG;
+static char tag_ack = CEPH_MSGR_TAG_ACK;
+static char tag_keepalive = CEPH_MSGR_TAG_KEEPALIVE;
+
+
+static void queue_con(struct ceph_connection *con);
+static void con_work(struct work_struct *);
+static void ceph_fault(struct ceph_connection *con);
+
+const char *ceph_name_type_str(int t)
+{
+	switch (t) {
+	case CEPH_ENTITY_TYPE_MON: return "mon";
+	case CEPH_ENTITY_TYPE_MDS: return "mds";
+	case CEPH_ENTITY_TYPE_OSD: return "osd";
+	case CEPH_ENTITY_TYPE_CLIENT: return "client";
+	case CEPH_ENTITY_TYPE_ADMIN: return "admin";
+	default: return "???";
+	}
+}
+
+/*
+ * nicely render a sockaddr as a string.
+ */
+#define MAX_ADDR_STR 20
+static char addr_str[MAX_ADDR_STR][40];
+static DEFINE_SPINLOCK(addr_str_lock);
+static int last_addr_str;
+
+const char *pr_addr(const struct sockaddr_storage *ss)
+{
+	int i;
+	char *s;
+	struct sockaddr_in *in4 = (void *)ss;
+	unsigned char *quad = (void *)&in4->sin_addr.s_addr;
+	struct sockaddr_in6 *in6 = (void *)ss;
+
+	spin_lock(&addr_str_lock);
+	i = last_addr_str++;
+	if (last_addr_str == MAX_ADDR_STR)
+		last_addr_str = 0;
+	spin_unlock(&addr_str_lock);
+	s = addr_str[i];
+
+	switch (ss->ss_family) {
+	case AF_INET:
+		sprintf(s, "%u.%u.%u.%u:%u",
+			(unsigned int)quad[0],
+			(unsigned int)quad[1],
+			(unsigned int)quad[2],
+			(unsigned int)quad[3],
+			(unsigned int)ntohs(in4->sin_port));
+		break;
+
+	case AF_INET6:
+		sprintf(s, "%04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x:%u",
+			in6->sin6_addr.s6_addr16[0],
+			in6->sin6_addr.s6_addr16[1],
+			in6->sin6_addr.s6_addr16[2],
+			in6->sin6_addr.s6_addr16[3],
+			in6->sin6_addr.s6_addr16[4],
+			in6->sin6_addr.s6_addr16[5],
+			in6->sin6_addr.s6_addr16[6],
+			in6->sin6_addr.s6_addr16[7],
+			(unsigned int)ntohs(in6->sin6_port));
+		break;
+
+	default:
+		sprintf(s, "(unknown sockaddr family %d)", (int)ss->ss_family);
+	}
+
+	return s;
+}
+
+static void encode_my_addr(struct ceph_messenger *msgr)
+{
+	memcpy(&msgr->my_enc_addr, &msgr->inst.addr, sizeof(msgr->my_enc_addr));
+	ceph_encode_addr(&msgr->my_enc_addr);
+}
+
+/*
+ * work queue for all reading and writing to/from the socket.
+ */
+struct workqueue_struct *ceph_msgr_wq;
+
+int __init ceph_msgr_init(void)
+{
+	ceph_msgr_wq = create_workqueue("ceph-msgr");
+	if (IS_ERR(ceph_msgr_wq)) {
+		int ret = PTR_ERR(ceph_msgr_wq);
+		pr_err("msgr_init failed to create workqueue: %d\n", ret);
+		ceph_msgr_wq = NULL;
+		return ret;
+	}
+	return 0;
+}
+
+void ceph_msgr_exit(void)
+{
+	destroy_workqueue(ceph_msgr_wq);
+}
+
+/*
+ * socket callback functions
+ */
+
+/* data available on socket, or listen socket received a connect */
+static void ceph_data_ready(struct sock *sk, int count_unused)
+{
+	struct ceph_connection *con =
+		(struct ceph_connection *)sk->sk_user_data;
+	if (sk->sk_state != TCP_CLOSE_WAIT) {
+		dout("ceph_data_ready on %p state = %lu, queueing work\n",
+		     con, con->state);
+		queue_con(con);
+	}
+}
+
+/* socket has buffer space for writing */
+static void ceph_write_space(struct sock *sk)
+{
+	struct ceph_connection *con =
+		(struct ceph_connection *)sk->sk_user_data;
+
+	/* only queue to workqueue if there is data we want to write. */
+	if (test_bit(WRITE_PENDING, &con->state)) {
+		dout("ceph_write_space %p queueing write work\n", con);
+		queue_con(con);
+	} else {
+		dout("ceph_write_space %p nothing to write\n", con);
+	}
+
+	/* since we have our own write_space, clear the SOCK_NOSPACE flag */
+	clear_bit(SOCK_NOSPACE, &sk->sk_socket->flags);
+}
+
+/* socket's state has changed */
+static void ceph_state_change(struct sock *sk)
+{
+	struct ceph_connection *con =
+		(struct ceph_connection *)sk->sk_user_data;
+
+	dout("ceph_state_change %p state = %lu sk_state = %u\n",
+	     con, con->state, sk->sk_state);
+
+	if (test_bit(CLOSED, &con->state))
+		return;
+
+	switch (sk->sk_state) {
+	case TCP_CLOSE:
+		dout("ceph_state_change TCP_CLOSE\n");
+	case TCP_CLOSE_WAIT:
+		dout("ceph_state_change TCP_CLOSE_WAIT\n");
+		if (test_and_set_bit(SOCK_CLOSED, &con->state) == 0) {
+			if (test_bit(CONNECTING, &con->state))
+				con->error_msg = "connection failed";
+			else
+				con->error_msg = "socket closed";
+			queue_con(con);
+		}
+		break;
+	case TCP_ESTABLISHED:
+		dout("ceph_state_change TCP_ESTABLISHED\n");
+		queue_con(con);
+		break;
+	}
+}
+
+/*
+ * set up socket callbacks
+ */
+static void set_sock_callbacks(struct socket *sock,
+			       struct ceph_connection *con)
+{
+	struct sock *sk = sock->sk;
+	sk->sk_user_data = (void *)con;
+	sk->sk_data_ready = ceph_data_ready;
+	sk->sk_write_space = ceph_write_space;
+	sk->sk_state_change = ceph_state_change;
+}
+
+
+/*
+ * socket helpers
+ */
+
+/*
+ * initiate connection to a remote socket.
+ */
+static struct socket *ceph_tcp_connect(struct ceph_connection *con)
+{
+	struct sockaddr *paddr = (struct sockaddr *)&con->peer_addr.in_addr;
+	struct socket *sock;
+	int ret;
+
+	BUG_ON(con->sock);
+	ret = sock_create_kern(AF_INET, SOCK_STREAM, IPPROTO_TCP, &sock);
+	if (ret)
+		return ERR_PTR(ret);
+	con->sock = sock;
+	sock->sk->sk_allocation = GFP_NOFS;
+
+	set_sock_callbacks(sock, con);
+
+	dout("connect %s\n", pr_addr(&con->peer_addr.in_addr));
+
+	ret = sock->ops->connect(sock, paddr, sizeof(*paddr), O_NONBLOCK);
+	if (ret == -EINPROGRESS) {
+		dout("connect %s EINPROGRESS sk_state = %u\n",
+		     pr_addr(&con->peer_addr.in_addr),
+		     sock->sk->sk_state);
+		ret = 0;
+	}
+	if (ret < 0) {
+		pr_err("connect %s error %d\n",
+		       pr_addr(&con->peer_addr.in_addr), ret);
+		sock_release(sock);
+		con->sock = NULL;
+		con->error_msg = "connect error";
+	}
+
+	if (ret < 0)
+		return ERR_PTR(ret);
+	return sock;
+}
+
+static int ceph_tcp_recvmsg(struct socket *sock, void *buf, size_t len)
+{
+	struct kvec iov = {buf, len};
+	struct msghdr msg = { .msg_flags = MSG_DONTWAIT | MSG_NOSIGNAL };
+
+	return kernel_recvmsg(sock, &msg, &iov, 1, len, msg.msg_flags);
+}
+
+/*
+ * write something.  @more is true if caller will be sending more data
+ * shortly.
+ */
+static int ceph_tcp_sendmsg(struct socket *sock, struct kvec *iov,
+		     size_t kvlen, size_t len, int more)
+{
+	struct msghdr msg = { .msg_flags = MSG_DONTWAIT | MSG_NOSIGNAL };
+
+	if (more)
+		msg.msg_flags |= MSG_MORE;
+	else
+		msg.msg_flags |= MSG_EOR;  /* superfluous, but what the hell */
+
+	return kernel_sendmsg(sock, &msg, iov, kvlen, len);
+}
+
+
+/*
+ * Shutdown/close the socket for the given connection.
+ */
+static int con_close_socket(struct ceph_connection *con)
+{
+	int rc;
+
+	dout("con_close_socket on %p sock %p\n", con, con->sock);
+	if (!con->sock)
+		return 0;
+	set_bit(SOCK_CLOSED, &con->state);
+	rc = con->sock->ops->shutdown(con->sock, SHUT_RDWR);
+	sock_release(con->sock);
+	con->sock = NULL;
+	clear_bit(SOCK_CLOSED, &con->state);
+	return rc;
+}
+
+/*
+ * Reset a connection.  Discard all incoming and outgoing messages
+ * and clear *_seq state.
+ */
+static void ceph_msg_remove(struct ceph_msg *msg)
+{
+	list_del_init(&msg->list_head);
+	ceph_msg_put(msg);
+}
+static void ceph_msg_remove_list(struct list_head *head)
+{
+	while (!list_empty(head)) {
+		struct ceph_msg *msg = list_first_entry(head, struct ceph_msg,
+							list_head);
+		ceph_msg_remove(msg);
+	}
+}
+
+static void reset_connection(struct ceph_connection *con)
+{
+	/* reset connection, out_queue, msg_ and connect_seq */
+	/* discard existing out_queue and msg_seq */
+	ceph_msg_remove_list(&con->out_queue);
+	ceph_msg_remove_list(&con->out_sent);
+
+	if (con->in_msg) {
+		ceph_msg_put(con->in_msg);
+		con->in_msg = NULL;
+	}
+
+	con->connect_seq = 0;
+	con->out_seq = 0;
+	if (con->out_msg) {
+		ceph_msg_put(con->out_msg);
+		con->out_msg = NULL;
+	}
+	con->in_seq = 0;
+}
+
+/*
+ * mark a peer down.  drop any open connections.
+ */
+void ceph_con_close(struct ceph_connection *con)
+{
+	dout("con_close %p peer %s\n", con, pr_addr(&con->peer_addr.in_addr));
+	set_bit(CLOSED, &con->state);  /* in case there's queued work */
+	clear_bit(STANDBY, &con->state);  /* avoid connect_seq bump */
+	clear_bit(LOSSYTX, &con->state);  /* so we retry next connect */
+	clear_bit(KEEPALIVE_PENDING, &con->state);
+	clear_bit(WRITE_PENDING, &con->state);
+	mutex_lock(&con->mutex);
+	reset_connection(con);
+	cancel_delayed_work(&con->work);
+	mutex_unlock(&con->mutex);
+	queue_con(con);
+}
+
+/*
+ * Reopen a closed connection, with a new peer address.
+ */
+void ceph_con_open(struct ceph_connection *con, struct ceph_entity_addr *addr)
+{
+	dout("con_open %p %s\n", con, pr_addr(&addr->in_addr));
+	set_bit(OPENING, &con->state);
+	clear_bit(CLOSED, &con->state);
+	memcpy(&con->peer_addr, addr, sizeof(*addr));
+	con->delay = 0;      /* reset backoff memory */
+	queue_con(con);
+}
+
+/*
+ * generic get/put
+ */
+struct ceph_connection *ceph_con_get(struct ceph_connection *con)
+{
+	dout("con_get %p nref = %d -> %d\n", con,
+	     atomic_read(&con->nref), atomic_read(&con->nref) + 1);
+	if (atomic_inc_not_zero(&con->nref))
+		return con;
+	return NULL;
+}
+
+void ceph_con_put(struct ceph_connection *con)
+{
+	dout("con_put %p nref = %d -> %d\n", con,
+	     atomic_read(&con->nref), atomic_read(&con->nref) - 1);
+	BUG_ON(atomic_read(&con->nref) == 0);
+	if (atomic_dec_and_test(&con->nref)) {
+		BUG_ON(con->sock);
+		kfree(con);
+	}
+}
+
+/*
+ * initialize a new connection.
+ */
+void ceph_con_init(struct ceph_messenger *msgr, struct ceph_connection *con)
+{
+	dout("con_init %p\n", con);
+	memset(con, 0, sizeof(*con));
+	atomic_set(&con->nref, 1);
+	con->msgr = msgr;
+	mutex_init(&con->mutex);
+	INIT_LIST_HEAD(&con->out_queue);
+	INIT_LIST_HEAD(&con->out_sent);
+	INIT_DELAYED_WORK(&con->work, con_work);
+}
+
+
+/*
+ * We maintain a global counter to order connection attempts.  Get
+ * a unique seq greater than @gt.
+ */
+static u32 get_global_seq(struct ceph_messenger *msgr, u32 gt)
+{
+	u32 ret;
+
+	spin_lock(&msgr->global_seq_lock);
+	if (msgr->global_seq < gt)
+		msgr->global_seq = gt;
+	ret = ++msgr->global_seq;
+	spin_unlock(&msgr->global_seq_lock);
+	return ret;
+}
+
+
+/*
+ * Prepare footer for currently outgoing message, and finish things
+ * off.  Assumes out_kvec* are already valid.. we just add on to the end.
+ */
+static void prepare_write_message_footer(struct ceph_connection *con, int v)
+{
+	struct ceph_msg *m = con->out_msg;
+
+	dout("prepare_write_message_footer %p\n", con);
+	con->out_kvec_is_msg = true;
+	con->out_kvec[v].iov_base = &m->footer;
+	con->out_kvec[v].iov_len = sizeof(m->footer);
+	con->out_kvec_bytes += sizeof(m->footer);
+	con->out_kvec_left++;
+	con->out_more = m->more_to_follow;
+	con->out_msg_done = true;
+}
+
+/*
+ * Prepare headers for the next outgoing message.
+ */
+static void prepare_write_message(struct ceph_connection *con)
+{
+	struct ceph_msg *m;
+	int v = 0;
+
+	con->out_kvec_bytes = 0;
+	con->out_kvec_is_msg = true;
+	con->out_msg_done = false;
+
+	/* Sneak an ack in there first?  If we can get it into the same
+	 * TCP packet that's a good thing. */
+	if (con->in_seq > con->in_seq_acked) {
+		con->in_seq_acked = con->in_seq;
+		con->out_kvec[v].iov_base = &tag_ack;
+		con->out_kvec[v++].iov_len = 1;
+		con->out_temp_ack = cpu_to_le64(con->in_seq_acked);
+		con->out_kvec[v].iov_base = &con->out_temp_ack;
+		con->out_kvec[v++].iov_len = sizeof(con->out_temp_ack);
+		con->out_kvec_bytes = 1 + sizeof(con->out_temp_ack);
+	}
+
+	m = list_first_entry(&con->out_queue,
+		       struct ceph_msg, list_head);
+	con->out_msg = m;
+	if (test_bit(LOSSYTX, &con->state)) {
+		list_del_init(&m->list_head);
+	} else {
+		/* put message on sent list */
+		ceph_msg_get(m);
+		list_move_tail(&m->list_head, &con->out_sent);
+	}
+
+	m->hdr.seq = cpu_to_le64(++con->out_seq);
+
+	dout("prepare_write_message %p seq %lld type %d len %d+%d+%d %d pgs\n",
+	     m, con->out_seq, le16_to_cpu(m->hdr.type),
+	     le32_to_cpu(m->hdr.front_len), le32_to_cpu(m->hdr.middle_len),
+	     le32_to_cpu(m->hdr.data_len),
+	     m->nr_pages);
+	BUG_ON(le32_to_cpu(m->hdr.front_len) != m->front.iov_len);
+
+	/* tag + hdr + front + middle */
+	con->out_kvec[v].iov_base = &tag_msg;
+	con->out_kvec[v++].iov_len = 1;
+	con->out_kvec[v].iov_base = &m->hdr;
+	con->out_kvec[v++].iov_len = sizeof(m->hdr);
+	con->out_kvec[v++] = m->front;
+	if (m->middle)
+		con->out_kvec[v++] = m->middle->vec;
+	con->out_kvec_left = v;
+	con->out_kvec_bytes += 1 + sizeof(m->hdr) + m->front.iov_len +
+		(m->middle ? m->middle->vec.iov_len : 0);
+	con->out_kvec_cur = con->out_kvec;
+
+	/* fill in crc (except data pages), footer */
+	con->out_msg->hdr.crc =
+		cpu_to_le32(crc32c(0, (void *)&m->hdr,
+				      sizeof(m->hdr) - sizeof(m->hdr.crc)));
+	con->out_msg->footer.flags = CEPH_MSG_FOOTER_COMPLETE;
+	con->out_msg->footer.front_crc =
+		cpu_to_le32(crc32c(0, m->front.iov_base, m->front.iov_len));
+	if (m->middle)
+		con->out_msg->footer.middle_crc =
+			cpu_to_le32(crc32c(0, m->middle->vec.iov_base,
+					   m->middle->vec.iov_len));
+	else
+		con->out_msg->footer.middle_crc = 0;
+	con->out_msg->footer.data_crc = 0;
+	dout("prepare_write_message front_crc %u data_crc %u\n",
+	     le32_to_cpu(con->out_msg->footer.front_crc),
+	     le32_to_cpu(con->out_msg->footer.middle_crc));
+
+	/* is there a data payload? */
+	if (le32_to_cpu(m->hdr.data_len) > 0) {
+		/* initialize page iterator */
+		con->out_msg_pos.page = 0;
+		con->out_msg_pos.page_pos =
+			le16_to_cpu(m->hdr.data_off) & ~PAGE_MASK;
+		con->out_msg_pos.data_pos = 0;
+		con->out_msg_pos.did_page_crc = 0;
+		con->out_more = 1;  /* data + footer will follow */
+	} else {
+		/* no, queue up footer too and be done */
+		prepare_write_message_footer(con, v);
+	}
+
+	set_bit(WRITE_PENDING, &con->state);
+}
+
+/*
+ * Prepare an ack.
+ */
+static void prepare_write_ack(struct ceph_connection *con)
+{
+	dout("prepare_write_ack %p %llu -> %llu\n", con,
+	     con->in_seq_acked, con->in_seq);
+	con->in_seq_acked = con->in_seq;
+
+	con->out_kvec[0].iov_base = &tag_ack;
+	con->out_kvec[0].iov_len = 1;
+	con->out_temp_ack = cpu_to_le64(con->in_seq_acked);
+	con->out_kvec[1].iov_base = &con->out_temp_ack;
+	con->out_kvec[1].iov_len = sizeof(con->out_temp_ack);
+	con->out_kvec_left = 2;
+	con->out_kvec_bytes = 1 + sizeof(con->out_temp_ack);
+	con->out_kvec_cur = con->out_kvec;
+	con->out_more = 1;  /* more will follow.. eventually.. */
+	set_bit(WRITE_PENDING, &con->state);
+}
+
+/*
+ * Prepare to write keepalive byte.
+ */
+static void prepare_write_keepalive(struct ceph_connection *con)
+{
+	dout("prepare_write_keepalive %p\n", con);
+	con->out_kvec[0].iov_base = &tag_keepalive;
+	con->out_kvec[0].iov_len = 1;
+	con->out_kvec_left = 1;
+	con->out_kvec_bytes = 1;
+	con->out_kvec_cur = con->out_kvec;
+	set_bit(WRITE_PENDING, &con->state);
+}
+
+/*
+ * Connection negotiation.
+ */
+
+static void prepare_connect_authorizer(struct ceph_connection *con)
+{
+	void *auth_buf;
+	int auth_len = 0;
+	int auth_protocol = 0;
+
+	mutex_unlock(&con->mutex);
+	if (con->ops->get_authorizer)
+		con->ops->get_authorizer(con, &auth_buf, &auth_len,
+					 &auth_protocol, &con->auth_reply_buf,
+					 &con->auth_reply_buf_len,
+					 con->auth_retry);
+	mutex_lock(&con->mutex);
+
+	con->out_connect.authorizer_protocol = cpu_to_le32(auth_protocol);
+	con->out_connect.authorizer_len = cpu_to_le32(auth_len);
+
+	con->out_kvec[con->out_kvec_left].iov_base = auth_buf;
+	con->out_kvec[con->out_kvec_left].iov_len = auth_len;
+	con->out_kvec_left++;
+	con->out_kvec_bytes += auth_len;
+}
+
+/*
+ * We connected to a peer and are saying hello.
+ */
+static void prepare_write_banner(struct ceph_messenger *msgr,
+				 struct ceph_connection *con)
+{
+	int len = strlen(CEPH_BANNER);
+
+	con->out_kvec[0].iov_base = CEPH_BANNER;
+	con->out_kvec[0].iov_len = len;
+	con->out_kvec[1].iov_base = &msgr->my_enc_addr;
+	con->out_kvec[1].iov_len = sizeof(msgr->my_enc_addr);
+	con->out_kvec_left = 2;
+	con->out_kvec_bytes = len + sizeof(msgr->my_enc_addr);
+	con->out_kvec_cur = con->out_kvec;
+	con->out_more = 0;
+	set_bit(WRITE_PENDING, &con->state);
+}
+
+static void prepare_write_connect(struct ceph_messenger *msgr,
+				  struct ceph_connection *con,
+				  int after_banner)
+{
+	unsigned global_seq = get_global_seq(con->msgr, 0);
+	int proto;
+
+	switch (con->peer_name.type) {
+	case CEPH_ENTITY_TYPE_MON:
+		proto = CEPH_MONC_PROTOCOL;
+		break;
+	case CEPH_ENTITY_TYPE_OSD:
+		proto = CEPH_OSDC_PROTOCOL;
+		break;
+	case CEPH_ENTITY_TYPE_MDS:
+		proto = CEPH_MDSC_PROTOCOL;
+		break;
+	default:
+		BUG();
+	}
+
+	dout("prepare_write_connect %p cseq=%d gseq=%d proto=%d\n", con,
+	     con->connect_seq, global_seq, proto);
+
+	con->out_connect.features = CEPH_FEATURE_SUPPORTED;
+	con->out_connect.host_type = cpu_to_le32(CEPH_ENTITY_TYPE_CLIENT);
+	con->out_connect.connect_seq = cpu_to_le32(con->connect_seq);
+	con->out_connect.global_seq = cpu_to_le32(global_seq);
+	con->out_connect.protocol_version = cpu_to_le32(proto);
+	con->out_connect.flags = 0;
+
+	if (!after_banner) {
+		con->out_kvec_left = 0;
+		con->out_kvec_bytes = 0;
+	}
+	con->out_kvec[con->out_kvec_left].iov_base = &con->out_connect;
+	con->out_kvec[con->out_kvec_left].iov_len = sizeof(con->out_connect);
+	con->out_kvec_left++;
+	con->out_kvec_bytes += sizeof(con->out_connect);
+	con->out_kvec_cur = con->out_kvec;
+	con->out_more = 0;
+	set_bit(WRITE_PENDING, &con->state);
+
+	prepare_connect_authorizer(con);
+}
+
+
+/*
+ * write as much of pending kvecs to the socket as we can.
+ *  1 -> done
+ *  0 -> socket full, but more to do
+ * <0 -> error
+ */
+static int write_partial_kvec(struct ceph_connection *con)
+{
+	int ret;
+
+	dout("write_partial_kvec %p %d left\n", con, con->out_kvec_bytes);
+	while (con->out_kvec_bytes > 0) {
+		ret = ceph_tcp_sendmsg(con->sock, con->out_kvec_cur,
+				       con->out_kvec_left, con->out_kvec_bytes,
+				       con->out_more);
+		if (ret <= 0)
+			goto out;
+		con->out_kvec_bytes -= ret;
+		if (con->out_kvec_bytes == 0)
+			break;            /* done */
+		while (ret > 0) {
+			if (ret >= con->out_kvec_cur->iov_len) {
+				ret -= con->out_kvec_cur->iov_len;
+				con->out_kvec_cur++;
+				con->out_kvec_left--;
+			} else {
+				con->out_kvec_cur->iov_len -= ret;
+				con->out_kvec_cur->iov_base += ret;
+				ret = 0;
+				break;
+			}
+		}
+	}
+	con->out_kvec_left = 0;
+	con->out_kvec_is_msg = false;
+	ret = 1;
+out:
+	dout("write_partial_kvec %p %d left in %d kvecs ret = %d\n", con,
+	     con->out_kvec_bytes, con->out_kvec_left, ret);
+	return ret;  /* done! */
+}
+
+/*
+ * Write as much message data payload as we can.  If we finish, queue
+ * up the footer.
+ *  1 -> done, footer is now queued in out_kvec[].
+ *  0 -> socket full, but more to do
+ * <0 -> error
+ */
+static int write_partial_msg_pages(struct ceph_connection *con)
+{
+	struct ceph_msg *msg = con->out_msg;
+	unsigned data_len = le32_to_cpu(msg->hdr.data_len);
+	size_t len;
+	int crc = con->msgr->nocrc;
+	int ret;
+
+	dout("write_partial_msg_pages %p msg %p page %d/%d offset %d\n",
+	     con, con->out_msg, con->out_msg_pos.page, con->out_msg->nr_pages,
+	     con->out_msg_pos.page_pos);
+
+	while (con->out_msg_pos.page < con->out_msg->nr_pages) {
+		struct page *page = NULL;
+		void *kaddr = NULL;
+
+		/*
+		 * if we are calculating the data crc (the default), we need
+		 * to map the page.  if our pages[] has been revoked, use the
+		 * zero page.
+		 */
+		if (msg->pages) {
+			page = msg->pages[con->out_msg_pos.page];
+			if (crc)
+				kaddr = kmap(page);
+		} else if (msg->pagelist) {
+			page = list_first_entry(&msg->pagelist->head,
+						struct page, lru);
+			if (crc)
+				kaddr = kmap(page);
+		} else {
+			page = con->msgr->zero_page;
+			if (crc)
+				kaddr = page_address(con->msgr->zero_page);
+		}
+		len = min((int)(PAGE_SIZE - con->out_msg_pos.page_pos),
+			  (int)(data_len - con->out_msg_pos.data_pos));
+		if (crc && !con->out_msg_pos.did_page_crc) {
+			void *base = kaddr + con->out_msg_pos.page_pos;
+			u32 tmpcrc = le32_to_cpu(con->out_msg->footer.data_crc);
+
+			BUG_ON(kaddr == NULL);
+			con->out_msg->footer.data_crc =
+				cpu_to_le32(crc32c(tmpcrc, base, len));
+			con->out_msg_pos.did_page_crc = 1;
+		}
+
+		ret = kernel_sendpage(con->sock, page,
+				      con->out_msg_pos.page_pos, len,
+				      MSG_DONTWAIT | MSG_NOSIGNAL |
+				      MSG_MORE);
+
+		if (crc && (msg->pages || msg->pagelist))
+			kunmap(page);
+
+		if (ret <= 0)
+			goto out;
+
+		con->out_msg_pos.data_pos += ret;
+		con->out_msg_pos.page_pos += ret;
+		if (ret == len) {
+			con->out_msg_pos.page_pos = 0;
+			con->out_msg_pos.page++;
+			con->out_msg_pos.did_page_crc = 0;
+			if (msg->pagelist)
+				list_move_tail(&page->lru,
+					       &msg->pagelist->head);
+		}
+	}
+
+	dout("write_partial_msg_pages %p msg %p done\n", con, msg);
+
+	/* prepare and queue up footer, too */
+	if (!crc)
+		con->out_msg->footer.flags |= CEPH_MSG_FOOTER_NOCRC;
+	con->out_kvec_bytes = 0;
+	con->out_kvec_left = 0;
+	con->out_kvec_cur = con->out_kvec;
+	prepare_write_message_footer(con, 0);
+	ret = 1;
+out:
+	return ret;
+}
+
+/*
+ * write some zeros
+ */
+static int write_partial_skip(struct ceph_connection *con)
+{
+	int ret;
+
+	while (con->out_skip > 0) {
+		struct kvec iov = {
+			.iov_base = page_address(con->msgr->zero_page),
+			.iov_len = min(con->out_skip, (int)PAGE_CACHE_SIZE)
+		};
+
+		ret = ceph_tcp_sendmsg(con->sock, &iov, 1, iov.iov_len, 1);
+		if (ret <= 0)
+			goto out;
+		con->out_skip -= ret;
+	}
+	ret = 1;
+out:
+	return ret;
+}
+
+/*
+ * Prepare to read connection handshake, or an ack.
+ */
+static void prepare_read_banner(struct ceph_connection *con)
+{
+	dout("prepare_read_banner %p\n", con);
+	con->in_base_pos = 0;
+}
+
+static void prepare_read_connect(struct ceph_connection *con)
+{
+	dout("prepare_read_connect %p\n", con);
+	con->in_base_pos = 0;
+}
+
+static void prepare_read_connect_retry(struct ceph_connection *con)
+{
+	dout("prepare_read_connect_retry %p\n", con);
+	con->in_base_pos = strlen(CEPH_BANNER) + sizeof(con->actual_peer_addr)
+		+ sizeof(con->peer_addr_for_me);
+}
+
+static void prepare_read_ack(struct ceph_connection *con)
+{
+	dout("prepare_read_ack %p\n", con);
+	con->in_base_pos = 0;
+}
+
+static void prepare_read_tag(struct ceph_connection *con)
+{
+	dout("prepare_read_tag %p\n", con);
+	con->in_base_pos = 0;
+	con->in_tag = CEPH_MSGR_TAG_READY;
+}
+
+/*
+ * Prepare to read a message.
+ */
+static int prepare_read_message(struct ceph_connection *con)
+{
+	dout("prepare_read_message %p\n", con);
+	BUG_ON(con->in_msg != NULL);
+	con->in_base_pos = 0;
+	con->in_front_crc = con->in_middle_crc = con->in_data_crc = 0;
+	return 0;
+}
+
+
+static int read_partial(struct ceph_connection *con,
+			int *to, int size, void *object)
+{
+	*to += size;
+	while (con->in_base_pos < *to) {
+		int left = *to - con->in_base_pos;
+		int have = size - left;
+		int ret = ceph_tcp_recvmsg(con->sock, object + have, left);
+		if (ret <= 0)
+			return ret;
+		con->in_base_pos += ret;
+	}
+	return 1;
+}
+
+
+/*
+ * Read all or part of the connect-side handshake on a new connection
+ */
+static int read_partial_banner(struct ceph_connection *con)
+{
+	int ret, to = 0;
+
+	dout("read_partial_banner %p at %d\n", con, con->in_base_pos);
+
+	/* peer's banner */
+	ret = read_partial(con, &to, strlen(CEPH_BANNER), con->in_banner);
+	if (ret <= 0)
+		goto out;
+	ret = read_partial(con, &to, sizeof(con->actual_peer_addr),
+			   &con->actual_peer_addr);
+	if (ret <= 0)
+		goto out;
+	ret = read_partial(con, &to, sizeof(con->peer_addr_for_me),
+			   &con->peer_addr_for_me);
+	if (ret <= 0)
+		goto out;
+out:
+	return ret;
+}
+
+static int read_partial_connect(struct ceph_connection *con)
+{
+	int ret, to = 0;
+
+	dout("read_partial_connect %p at %d\n", con, con->in_base_pos);
+
+	ret = read_partial(con, &to, sizeof(con->in_reply), &con->in_reply);
+	if (ret <= 0)
+		goto out;
+	ret = read_partial(con, &to, le32_to_cpu(con->in_reply.authorizer_len),
+			   con->auth_reply_buf);
+	if (ret <= 0)
+		goto out;
+
+	dout("read_partial_connect %p tag %d, con_seq = %u, g_seq = %u\n",
+	     con, (int)con->in_reply.tag,
+	     le32_to_cpu(con->in_reply.connect_seq),
+	     le32_to_cpu(con->in_reply.global_seq));
+out:
+	return ret;
+
+}
+
+/*
+ * Verify the hello banner looks okay.
+ */
+static int verify_hello(struct ceph_connection *con)
+{
+	if (memcmp(con->in_banner, CEPH_BANNER, strlen(CEPH_BANNER))) {
+		pr_err("connect to %s got bad banner\n",
+		       pr_addr(&con->peer_addr.in_addr));
+		con->error_msg = "protocol error, bad banner";
+		return -1;
+	}
+	return 0;
+}
+
+static bool addr_is_blank(struct sockaddr_storage *ss)
+{
+	switch (ss->ss_family) {
+	case AF_INET:
+		return ((struct sockaddr_in *)ss)->sin_addr.s_addr == 0;
+	case AF_INET6:
+		return
+		     ((struct sockaddr_in6 *)ss)->sin6_addr.s6_addr32[0] == 0 &&
+		     ((struct sockaddr_in6 *)ss)->sin6_addr.s6_addr32[1] == 0 &&
+		     ((struct sockaddr_in6 *)ss)->sin6_addr.s6_addr32[2] == 0 &&
+		     ((struct sockaddr_in6 *)ss)->sin6_addr.s6_addr32[3] == 0;
+	}
+	return false;
+}
+
+static int addr_port(struct sockaddr_storage *ss)
+{
+	switch (ss->ss_family) {
+	case AF_INET:
+		return ntohs(((struct sockaddr_in *)ss)->sin_port);
+	case AF_INET6:
+		return ntohs(((struct sockaddr_in6 *)ss)->sin6_port);
+	}
+	return 0;
+}
+
+static void addr_set_port(struct sockaddr_storage *ss, int p)
+{
+	switch (ss->ss_family) {
+	case AF_INET:
+		((struct sockaddr_in *)ss)->sin_port = htons(p);
+	case AF_INET6:
+		((struct sockaddr_in6 *)ss)->sin6_port = htons(p);
+	}
+}
+
+/*
+ * Parse an ip[:port] list into an addr array.  Use the default
+ * monitor port if a port isn't specified.
+ */
+int ceph_parse_ips(const char *c, const char *end,
+		   struct ceph_entity_addr *addr,
+		   int max_count, int *count)
+{
+	int i;
+	const char *p = c;
+
+	dout("parse_ips on '%.*s'\n", (int)(end-c), c);
+	for (i = 0; i < max_count; i++) {
+		const char *ipend;
+		struct sockaddr_storage *ss = &addr[i].in_addr;
+		struct sockaddr_in *in4 = (void *)ss;
+		struct sockaddr_in6 *in6 = (void *)ss;
+		int port;
+
+		memset(ss, 0, sizeof(*ss));
+		if (in4_pton(p, end - p, (u8 *)&in4->sin_addr.s_addr,
+			     ',', &ipend)) {
+			ss->ss_family = AF_INET;
+		} else if (in6_pton(p, end - p, (u8 *)&in6->sin6_addr.s6_addr,
+				    ',', &ipend)) {
+			ss->ss_family = AF_INET6;
+		} else {
+			goto bad;
+		}
+		p = ipend;
+
+		/* port? */
+		if (p < end && *p == ':') {
+			port = 0;
+			p++;
+			while (p < end && *p >= '0' && *p <= '9') {
+				port = (port * 10) + (*p - '0');
+				p++;
+			}
+			if (port > 65535 || port == 0)
+				goto bad;
+		} else {
+			port = CEPH_MON_PORT;
+		}
+
+		addr_set_port(ss, port);
+
+		dout("parse_ips got %s\n", pr_addr(ss));
+
+		if (p == end)
+			break;
+		if (*p != ',')
+			goto bad;
+		p++;
+	}
+
+	if (p != end)
+		goto bad;
+
+	if (count)
+		*count = i + 1;
+	return 0;
+
+bad:
+	pr_err("parse_ips bad ip '%s'\n", c);
+	return -EINVAL;
+}
+
+static int process_banner(struct ceph_connection *con)
+{
+	dout("process_banner on %p\n", con);
+
+	if (verify_hello(con) < 0)
+		return -1;
+
+	ceph_decode_addr(&con->actual_peer_addr);
+	ceph_decode_addr(&con->peer_addr_for_me);
+
+	/*
+	 * Make sure the other end is who we wanted.  note that the other
+	 * end may not yet know their ip address, so if it's 0.0.0.0, give
+	 * them the benefit of the doubt.
+	 */
+	if (memcmp(&con->peer_addr, &con->actual_peer_addr,
+		   sizeof(con->peer_addr)) != 0 &&
+	    !(addr_is_blank(&con->actual_peer_addr.in_addr) &&
+	      con->actual_peer_addr.nonce == con->peer_addr.nonce)) {
+		pr_warning("wrong peer, want %s/%lld, got %s/%lld\n",
+			   pr_addr(&con->peer_addr.in_addr),
+			   le64_to_cpu(con->peer_addr.nonce),
+			   pr_addr(&con->actual_peer_addr.in_addr),
+			   le64_to_cpu(con->actual_peer_addr.nonce));
+		con->error_msg = "wrong peer at address";
+		return -1;
+	}
+
+	/*
+	 * did we learn our address?
+	 */
+	if (addr_is_blank(&con->msgr->inst.addr.in_addr)) {
+		int port = addr_port(&con->msgr->inst.addr.in_addr);
+
+		memcpy(&con->msgr->inst.addr.in_addr,
+		       &con->peer_addr_for_me.in_addr,
+		       sizeof(con->peer_addr_for_me.in_addr));
+		addr_set_port(&con->msgr->inst.addr.in_addr, port);
+		encode_my_addr(con->msgr);
+		dout("process_banner learned my addr is %s\n",
+		     pr_addr(&con->msgr->inst.addr.in_addr));
+	}
+
+	set_bit(NEGOTIATING, &con->state);
+	prepare_read_connect(con);
+	return 0;
+}
+
+static void fail_protocol(struct ceph_connection *con)
+{
+	reset_connection(con);
+	set_bit(CLOSED, &con->state);  /* in case there's queued work */
+
+	mutex_unlock(&con->mutex);
+	if (con->ops->bad_proto)
+		con->ops->bad_proto(con);
+	mutex_lock(&con->mutex);
+}
+
+static int process_connect(struct ceph_connection *con)
+{
+	u64 sup_feat = CEPH_FEATURE_SUPPORTED;
+	u64 req_feat = CEPH_FEATURE_REQUIRED;
+	u64 server_feat = le64_to_cpu(con->in_reply.features);
+
+	dout("process_connect on %p tag %d\n", con, (int)con->in_tag);
+
+	switch (con->in_reply.tag) {
+	case CEPH_MSGR_TAG_FEATURES:
+		pr_err("%s%lld %s feature set mismatch,"
+		       " my %llx < server's %llx, missing %llx\n",
+		       ENTITY_NAME(con->peer_name),
+		       pr_addr(&con->peer_addr.in_addr),
+		       sup_feat, server_feat, server_feat & ~sup_feat);
+		con->error_msg = "missing required protocol features";
+		fail_protocol(con);
+		return -1;
+
+	case CEPH_MSGR_TAG_BADPROTOVER:
+		pr_err("%s%lld %s protocol version mismatch,"
+		       " my %d != server's %d\n",
+		       ENTITY_NAME(con->peer_name),
+		       pr_addr(&con->peer_addr.in_addr),
+		       le32_to_cpu(con->out_connect.protocol_version),
+		       le32_to_cpu(con->in_reply.protocol_version));
+		con->error_msg = "protocol version mismatch";
+		fail_protocol(con);
+		return -1;
+
+	case CEPH_MSGR_TAG_BADAUTHORIZER:
+		con->auth_retry++;
+		dout("process_connect %p got BADAUTHORIZER attempt %d\n", con,
+		     con->auth_retry);
+		if (con->auth_retry == 2) {
+			con->error_msg = "connect authorization failure";
+			reset_connection(con);
+			set_bit(CLOSED, &con->state);
+			return -1;
+		}
+		con->auth_retry = 1;
+		prepare_write_connect(con->msgr, con, 0);
+		prepare_read_connect_retry(con);
+		break;
+
+	case CEPH_MSGR_TAG_RESETSESSION:
+		/*
+		 * If we connected with a large connect_seq but the peer
+		 * has no record of a session with us (no connection, or
+		 * connect_seq == 0), they will send RESETSESION to indicate
+		 * that they must have reset their session, and may have
+		 * dropped messages.
+		 */
+		dout("process_connect got RESET peer seq %u\n",
+		     le32_to_cpu(con->in_connect.connect_seq));
+		pr_err("%s%lld %s connection reset\n",
+		       ENTITY_NAME(con->peer_name),
+		       pr_addr(&con->peer_addr.in_addr));
+		reset_connection(con);
+		prepare_write_connect(con->msgr, con, 0);
+		prepare_read_connect(con);
+
+		/* Tell ceph about it. */
+		mutex_unlock(&con->mutex);
+		pr_info("reset on %s%lld\n", ENTITY_NAME(con->peer_name));
+		if (con->ops->peer_reset)
+			con->ops->peer_reset(con);
+		mutex_lock(&con->mutex);
+		break;
+
+	case CEPH_MSGR_TAG_RETRY_SESSION:
+		/*
+		 * If we sent a smaller connect_seq than the peer has, try
+		 * again with a larger value.
+		 */
+		dout("process_connect got RETRY my seq = %u, peer_seq = %u\n",
+		     le32_to_cpu(con->out_connect.connect_seq),
+		     le32_to_cpu(con->in_connect.connect_seq));
+		con->connect_seq = le32_to_cpu(con->in_connect.connect_seq);
+		prepare_write_connect(con->msgr, con, 0);
+		prepare_read_connect(con);
+		break;
+
+	case CEPH_MSGR_TAG_RETRY_GLOBAL:
+		/*
+		 * If we sent a smaller global_seq than the peer has, try
+		 * again with a larger value.
+		 */
+		dout("process_connect got RETRY_GLOBAL my %u peer_gseq %u\n",
+		     con->peer_global_seq,
+		     le32_to_cpu(con->in_connect.global_seq));
+		get_global_seq(con->msgr,
+			       le32_to_cpu(con->in_connect.global_seq));
+		prepare_write_connect(con->msgr, con, 0);
+		prepare_read_connect(con);
+		break;
+
+	case CEPH_MSGR_TAG_READY:
+		if (req_feat & ~server_feat) {
+			pr_err("%s%lld %s protocol feature mismatch,"
+			       " my required %llx > server's %llx, need %llx\n",
+			       ENTITY_NAME(con->peer_name),
+			       pr_addr(&con->peer_addr.in_addr),
+			       req_feat, server_feat, req_feat & ~server_feat);
+			con->error_msg = "missing required protocol features";
+			fail_protocol(con);
+			return -1;
+		}
+		clear_bit(CONNECTING, &con->state);
+		con->peer_global_seq = le32_to_cpu(con->in_reply.global_seq);
+		con->connect_seq++;
+		dout("process_connect got READY gseq %d cseq %d (%d)\n",
+		     con->peer_global_seq,
+		     le32_to_cpu(con->in_reply.connect_seq),
+		     con->connect_seq);
+		WARN_ON(con->connect_seq !=
+			le32_to_cpu(con->in_reply.connect_seq));
+
+		if (con->in_reply.flags & CEPH_MSG_CONNECT_LOSSY)
+			set_bit(LOSSYTX, &con->state);
+
+		prepare_read_tag(con);
+		break;
+
+	case CEPH_MSGR_TAG_WAIT:
+		/*
+		 * If there is a connection race (we are opening
+		 * connections to each other), one of us may just have
+		 * to WAIT.  This shouldn't happen if we are the
+		 * client.
+		 */
+		pr_err("process_connect peer connecting WAIT\n");
+
+	default:
+		pr_err("connect protocol error, will retry\n");
+		con->error_msg = "protocol error, garbage tag during connect";
+		return -1;
+	}
+	return 0;
+}
+
+
+/*
+ * read (part of) an ack
+ */
+static int read_partial_ack(struct ceph_connection *con)
+{
+	int to = 0;
+
+	return read_partial(con, &to, sizeof(con->in_temp_ack),
+			    &con->in_temp_ack);
+}
+
+
+/*
+ * We can finally discard anything that's been acked.
+ */
+static void process_ack(struct ceph_connection *con)
+{
+	struct ceph_msg *m;
+	u64 ack = le64_to_cpu(con->in_temp_ack);
+	u64 seq;
+
+	while (!list_empty(&con->out_sent)) {
+		m = list_first_entry(&con->out_sent, struct ceph_msg,
+				     list_head);
+		seq = le64_to_cpu(m->hdr.seq);
+		if (seq > ack)
+			break;
+		dout("got ack for seq %llu type %d at %p\n", seq,
+		     le16_to_cpu(m->hdr.type), m);
+		ceph_msg_remove(m);
+	}
+	prepare_read_tag(con);
+}
+
+
+
+
+static int read_partial_message_section(struct ceph_connection *con,
+					struct kvec *section, unsigned int sec_len,
+					u32 *crc)
+{
+	int left;
+	int ret;
+
+	BUG_ON(!section);
+
+	while (section->iov_len < sec_len) {
+		BUG_ON(section->iov_base == NULL);
+		left = sec_len - section->iov_len;
+		ret = ceph_tcp_recvmsg(con->sock, (char *)section->iov_base +
+				       section->iov_len, left);
+		if (ret <= 0)
+			return ret;
+		section->iov_len += ret;
+		if (section->iov_len == sec_len)
+			*crc = crc32c(0, section->iov_base,
+				      section->iov_len);
+	}
+
+	return 1;
+}
+
+static struct ceph_msg *ceph_alloc_msg(struct ceph_connection *con,
+				struct ceph_msg_header *hdr,
+				int *skip);
+/*
+ * read (part of) a message.
+ */
+static int read_partial_message(struct ceph_connection *con)
+{
+	struct ceph_msg *m = con->in_msg;
+	void *p;
+	int ret;
+	int to, left;
+	unsigned front_len, middle_len, data_len, data_off;
+	int datacrc = con->msgr->nocrc;
+	int skip;
+
+	dout("read_partial_message con %p msg %p\n", con, m);
+
+	/* header */
+	while (con->in_base_pos < sizeof(con->in_hdr)) {
+		left = sizeof(con->in_hdr) - con->in_base_pos;
+		ret = ceph_tcp_recvmsg(con->sock,
+				       (char *)&con->in_hdr + con->in_base_pos,
+				       left);
+		if (ret <= 0)
+			return ret;
+		con->in_base_pos += ret;
+		if (con->in_base_pos == sizeof(con->in_hdr)) {
+			u32 crc = crc32c(0, (void *)&con->in_hdr,
+				 sizeof(con->in_hdr) - sizeof(con->in_hdr.crc));
+			if (crc != le32_to_cpu(con->in_hdr.crc)) {
+				pr_err("read_partial_message bad hdr "
+				       " crc %u != expected %u\n",
+				       crc, con->in_hdr.crc);
+				return -EBADMSG;
+			}
+		}
+	}
+	front_len = le32_to_cpu(con->in_hdr.front_len);
+	if (front_len > CEPH_MSG_MAX_FRONT_LEN)
+		return -EIO;
+	middle_len = le32_to_cpu(con->in_hdr.middle_len);
+	if (middle_len > CEPH_MSG_MAX_DATA_LEN)
+		return -EIO;
+	data_len = le32_to_cpu(con->in_hdr.data_len);
+	if (data_len > CEPH_MSG_MAX_DATA_LEN)
+		return -EIO;
+	data_off = le16_to_cpu(con->in_hdr.data_off);
+
+	/* allocate message? */
+	if (!con->in_msg) {
+		dout("got hdr type %d front %d data %d\n", con->in_hdr.type,
+		     con->in_hdr.front_len, con->in_hdr.data_len);
+		con->in_msg = ceph_alloc_msg(con, &con->in_hdr, &skip);
+		if (skip) {
+			/* skip this message */
+			dout("alloc_msg returned NULL, skipping message\n");
+			con->in_base_pos = -front_len - middle_len - data_len -
+				sizeof(m->footer);
+			con->in_tag = CEPH_MSGR_TAG_READY;
+			return 0;
+		}
+		if (IS_ERR(con->in_msg)) {
+			ret = PTR_ERR(con->in_msg);
+			con->in_msg = NULL;
+			con->error_msg =
+				"error allocating memory for incoming message";
+			return ret;
+		}
+		m = con->in_msg;
+		m->front.iov_len = 0;    /* haven't read it yet */
+		if (m->middle)
+			m->middle->vec.iov_len = 0;
+
+		con->in_msg_pos.page = 0;
+		con->in_msg_pos.page_pos = data_off & ~PAGE_MASK;
+		con->in_msg_pos.data_pos = 0;
+	}
+
+	/* front */
+	ret = read_partial_message_section(con, &m->front, front_len,
+					   &con->in_front_crc);
+	if (ret <= 0)
+		return ret;
+
+	/* middle */
+	if (m->middle) {
+		ret = read_partial_message_section(con, &m->middle->vec, middle_len,
+						   &con->in_middle_crc);
+		if (ret <= 0)
+			return ret;
+	}
+
+	/* (page) data */
+	while (con->in_msg_pos.data_pos < data_len) {
+		left = min((int)(data_len - con->in_msg_pos.data_pos),
+			   (int)(PAGE_SIZE - con->in_msg_pos.page_pos));
+		BUG_ON(m->pages == NULL);
+		p = kmap(m->pages[con->in_msg_pos.page]);
+		ret = ceph_tcp_recvmsg(con->sock, p + con->in_msg_pos.page_pos,
+				       left);
+		if (ret > 0 && datacrc)
+			con->in_data_crc =
+				crc32c(con->in_data_crc,
+					  p + con->in_msg_pos.page_pos, ret);
+		kunmap(m->pages[con->in_msg_pos.page]);
+		if (ret <= 0)
+			return ret;
+		con->in_msg_pos.data_pos += ret;
+		con->in_msg_pos.page_pos += ret;
+		if (con->in_msg_pos.page_pos == PAGE_SIZE) {
+			con->in_msg_pos.page_pos = 0;
+			con->in_msg_pos.page++;
+		}
+	}
+
+	/* footer */
+	to = sizeof(m->hdr) + sizeof(m->footer);
+	while (con->in_base_pos < to) {
+		left = to - con->in_base_pos;
+		ret = ceph_tcp_recvmsg(con->sock, (char *)&m->footer +
+				       (con->in_base_pos - sizeof(m->hdr)),
+				       left);
+		if (ret <= 0)
+			return ret;
+		con->in_base_pos += ret;
+	}
+	dout("read_partial_message got msg %p %d (%u) + %d (%u) + %d (%u)\n",
+	     m, front_len, m->footer.front_crc, middle_len,
+	     m->footer.middle_crc, data_len, m->footer.data_crc);
+
+	/* crc ok? */
+	if (con->in_front_crc != le32_to_cpu(m->footer.front_crc)) {
+		pr_err("read_partial_message %p front crc %u != exp. %u\n",
+		       m, con->in_front_crc, m->footer.front_crc);
+		return -EBADMSG;
+	}
+	if (con->in_middle_crc != le32_to_cpu(m->footer.middle_crc)) {
+		pr_err("read_partial_message %p middle crc %u != exp %u\n",
+		       m, con->in_middle_crc, m->footer.middle_crc);
+		return -EBADMSG;
+	}
+	if (datacrc &&
+	    (m->footer.flags & CEPH_MSG_FOOTER_NOCRC) == 0 &&
+	    con->in_data_crc != le32_to_cpu(m->footer.data_crc)) {
+		pr_err("read_partial_message %p data crc %u != exp. %u\n", m,
+		       con->in_data_crc, le32_to_cpu(m->footer.data_crc));
+		return -EBADMSG;
+	}
+
+	return 1; /* done! */
+}
+
+/*
+ * Process message.  This happens in the worker thread.  The callback should
+ * be careful not to do anything that waits on other incoming messages or it
+ * may deadlock.
+ */
+static void process_message(struct ceph_connection *con)
+{
+	struct ceph_msg *msg;
+
+	msg = con->in_msg;
+	con->in_msg = NULL;
+
+	/* if first message, set peer_name */
+	if (con->peer_name.type == 0)
+		con->peer_name = msg->hdr.src.name;
+
+	con->in_seq++;
+	mutex_unlock(&con->mutex);
+
+	dout("===== %p %llu from %s%lld %d=%s len %d+%d (%u %u %u) =====\n",
+	     msg, le64_to_cpu(msg->hdr.seq),
+	     ENTITY_NAME(msg->hdr.src.name),
+	     le16_to_cpu(msg->hdr.type),
+	     ceph_msg_type_name(le16_to_cpu(msg->hdr.type)),
+	     le32_to_cpu(msg->hdr.front_len),
+	     le32_to_cpu(msg->hdr.data_len),
+	     con->in_front_crc, con->in_middle_crc, con->in_data_crc);
+	con->ops->dispatch(con, msg);
+
+	mutex_lock(&con->mutex);
+	prepare_read_tag(con);
+}
+
+
+/*
+ * Write something to the socket.  Called in a worker thread when the
+ * socket appears to be writeable and we have something ready to send.
+ */
+static int try_write(struct ceph_connection *con)
+{
+	struct ceph_messenger *msgr = con->msgr;
+	int ret = 1;
+
+	dout("try_write start %p state %lu nref %d\n", con, con->state,
+	     atomic_read(&con->nref));
+
+	mutex_lock(&con->mutex);
+more:
+	dout("try_write out_kvec_bytes %d\n", con->out_kvec_bytes);
+
+	/* open the socket first? */
+	if (con->sock == NULL) {
+		/*
+		 * if we were STANDBY and are reconnecting _this_
+		 * connection, bump connect_seq now.  Always bump
+		 * global_seq.
+		 */
+		if (test_and_clear_bit(STANDBY, &con->state))
+			con->connect_seq++;
+
+		prepare_write_banner(msgr, con);
+		prepare_write_connect(msgr, con, 1);
+		prepare_read_banner(con);
+		set_bit(CONNECTING, &con->state);
+		clear_bit(NEGOTIATING, &con->state);
+
+		BUG_ON(con->in_msg);
+		con->in_tag = CEPH_MSGR_TAG_READY;
+		dout("try_write initiating connect on %p new state %lu\n",
+		     con, con->state);
+		con->sock = ceph_tcp_connect(con);
+		if (IS_ERR(con->sock)) {
+			con->sock = NULL;
+			con->error_msg = "connect error";
+			ret = -1;
+			goto out;
+		}
+	}
+
+more_kvec:
+	/* kvec data queued? */
+	if (con->out_skip) {
+		ret = write_partial_skip(con);
+		if (ret <= 0)
+			goto done;
+		if (ret < 0) {
+			dout("try_write write_partial_skip err %d\n", ret);
+			goto done;
+		}
+	}
+	if (con->out_kvec_left) {
+		ret = write_partial_kvec(con);
+		if (ret <= 0)
+			goto done;
+	}
+
+	/* msg pages? */
+	if (con->out_msg) {
+		if (con->out_msg_done) {
+			ceph_msg_put(con->out_msg);
+			con->out_msg = NULL;   /* we're done with this one */
+			goto do_next;
+		}
+
+		ret = write_partial_msg_pages(con);
+		if (ret == 1)
+			goto more_kvec;  /* we need to send the footer, too! */
+		if (ret == 0)
+			goto done;
+		if (ret < 0) {
+			dout("try_write write_partial_msg_pages err %d\n",
+			     ret);
+			goto done;
+		}
+	}
+
+do_next:
+	if (!test_bit(CONNECTING, &con->state)) {
+		/* is anything else pending? */
+		if (!list_empty(&con->out_queue)) {
+			prepare_write_message(con);
+			goto more;
+		}
+		if (con->in_seq > con->in_seq_acked) {
+			prepare_write_ack(con);
+			goto more;
+		}
+		if (test_and_clear_bit(KEEPALIVE_PENDING, &con->state)) {
+			prepare_write_keepalive(con);
+			goto more;
+		}
+	}
+
+	/* Nothing to do! */
+	clear_bit(WRITE_PENDING, &con->state);
+	dout("try_write nothing else to write.\n");
+done:
+	ret = 0;
+out:
+	mutex_unlock(&con->mutex);
+	dout("try_write done on %p\n", con);
+	return ret;
+}
+
+
+
+/*
+ * Read what we can from the socket.
+ */
+static int try_read(struct ceph_connection *con)
+{
+	struct ceph_messenger *msgr;
+	int ret = -1;
+
+	if (!con->sock)
+		return 0;
+
+	if (test_bit(STANDBY, &con->state))
+		return 0;
+
+	dout("try_read start on %p\n", con);
+	msgr = con->msgr;
+
+	mutex_lock(&con->mutex);
+
+more:
+	dout("try_read tag %d in_base_pos %d\n", (int)con->in_tag,
+	     con->in_base_pos);
+	if (test_bit(CONNECTING, &con->state)) {
+		if (!test_bit(NEGOTIATING, &con->state)) {
+			dout("try_read connecting\n");
+			ret = read_partial_banner(con);
+			if (ret <= 0)
+				goto done;
+			if (process_banner(con) < 0) {
+				ret = -1;
+				goto out;
+			}
+		}
+		ret = read_partial_connect(con);
+		if (ret <= 0)
+			goto done;
+		if (process_connect(con) < 0) {
+			ret = -1;
+			goto out;
+		}
+		goto more;
+	}
+
+	if (con->in_base_pos < 0) {
+		/*
+		 * skipping + discarding content.
+		 *
+		 * FIXME: there must be a better way to do this!
+		 */
+		static char buf[1024];
+		int skip = min(1024, -con->in_base_pos);
+		dout("skipping %d / %d bytes\n", skip, -con->in_base_pos);
+		ret = ceph_tcp_recvmsg(con->sock, buf, skip);
+		if (ret <= 0)
+			goto done;
+		con->in_base_pos += ret;
+		if (con->in_base_pos)
+			goto more;
+	}
+	if (con->in_tag == CEPH_MSGR_TAG_READY) {
+		/*
+		 * what's next?
+		 */
+		ret = ceph_tcp_recvmsg(con->sock, &con->in_tag, 1);
+		if (ret <= 0)
+			goto done;
+		dout("try_read got tag %d\n", (int)con->in_tag);
+		switch (con->in_tag) {
+		case CEPH_MSGR_TAG_MSG:
+			prepare_read_message(con);
+			break;
+		case CEPH_MSGR_TAG_ACK:
+			prepare_read_ack(con);
+			break;
+		case CEPH_MSGR_TAG_CLOSE:
+			set_bit(CLOSED, &con->state);   /* fixme */
+			goto done;
+		default:
+			goto bad_tag;
+		}
+	}
+	if (con->in_tag == CEPH_MSGR_TAG_MSG) {
+		ret = read_partial_message(con);
+		if (ret <= 0) {
+			switch (ret) {
+			case -EBADMSG:
+				con->error_msg = "bad crc";
+				ret = -EIO;
+				goto out;
+			case -EIO:
+				con->error_msg = "io error";
+				goto out;
+			default:
+				goto done;
+			}
+		}
+		if (con->in_tag == CEPH_MSGR_TAG_READY)
+			goto more;
+		process_message(con);
+		goto more;
+	}
+	if (con->in_tag == CEPH_MSGR_TAG_ACK) {
+		ret = read_partial_ack(con);
+		if (ret <= 0)
+			goto done;
+		process_ack(con);
+		goto more;
+	}
+
+done:
+	ret = 0;
+out:
+	mutex_unlock(&con->mutex);
+	dout("try_read done on %p\n", con);
+	return ret;
+
+bad_tag:
+	pr_err("try_read bad con->in_tag = %d\n", (int)con->in_tag);
+	con->error_msg = "protocol error, garbage tag";
+	ret = -1;
+	goto out;
+}
+
+
+/*
+ * Atomically queue work on a connection.  Bump @con reference to
+ * avoid races with connection teardown.
+ *
+ * There is some trickery going on with QUEUED and BUSY because we
+ * only want a _single_ thread operating on each connection at any
+ * point in time, but we want to use all available CPUs.
+ *
+ * The worker thread only proceeds if it can atomically set BUSY.  It
+ * clears QUEUED and does it's thing.  When it thinks it's done, it
+ * clears BUSY, then rechecks QUEUED.. if it's set again, it loops
+ * (tries again to set BUSY).
+ *
+ * To queue work, we first set QUEUED, _then_ if BUSY isn't set, we
+ * try to queue work.  If that fails (work is already queued, or BUSY)
+ * we give up (work also already being done or is queued) but leave QUEUED
+ * set so that the worker thread will loop if necessary.
+ */
+static void queue_con(struct ceph_connection *con)
+{
+	if (test_bit(DEAD, &con->state)) {
+		dout("queue_con %p ignoring: DEAD\n",
+		     con);
+		return;
+	}
+
+	if (!con->ops->get(con)) {
+		dout("queue_con %p ref count 0\n", con);
+		return;
+	}
+
+	set_bit(QUEUED, &con->state);
+	if (test_bit(BUSY, &con->state)) {
+		dout("queue_con %p - already BUSY\n", con);
+		con->ops->put(con);
+	} else if (!queue_work(ceph_msgr_wq, &con->work.work)) {
+		dout("queue_con %p - already queued\n", con);
+		con->ops->put(con);
+	} else {
+		dout("queue_con %p\n", con);
+	}
+}
+
+/*
+ * Do some work on a connection.  Drop a connection ref when we're done.
+ */
+static void con_work(struct work_struct *work)
+{
+	struct ceph_connection *con = container_of(work, struct ceph_connection,
+						   work.work);
+	int backoff = 0;
+
+more:
+	if (test_and_set_bit(BUSY, &con->state) != 0) {
+		dout("con_work %p BUSY already set\n", con);
+		goto out;
+	}
+	dout("con_work %p start, clearing QUEUED\n", con);
+	clear_bit(QUEUED, &con->state);
+
+	if (test_bit(CLOSED, &con->state)) { /* e.g. if we are replaced */
+		dout("con_work CLOSED\n");
+		con_close_socket(con);
+		goto done;
+	}
+	if (test_and_clear_bit(OPENING, &con->state)) {
+		/* reopen w/ new peer */
+		dout("con_work OPENING\n");
+		con_close_socket(con);
+	}
+
+	if (test_and_clear_bit(SOCK_CLOSED, &con->state) ||
+	    try_read(con) < 0 ||
+	    try_write(con) < 0) {
+		backoff = 1;
+		ceph_fault(con);     /* error/fault path */
+	}
+
+done:
+	clear_bit(BUSY, &con->state);
+	dout("con->state=%lu\n", con->state);
+	if (test_bit(QUEUED, &con->state)) {
+		if (!backoff || test_bit(OPENING, &con->state)) {
+			dout("con_work %p QUEUED reset, looping\n", con);
+			goto more;
+		}
+		dout("con_work %p QUEUED reset, but just faulted\n", con);
+		clear_bit(QUEUED, &con->state);
+	}
+	dout("con_work %p done\n", con);
+
+out:
+	con->ops->put(con);
+}
+
+
+/*
+ * Generic error/fault handler.  A retry mechanism is used with
+ * exponential backoff
+ */
+static void ceph_fault(struct ceph_connection *con)
+{
+	pr_err("%s%lld %s %s\n", ENTITY_NAME(con->peer_name),
+	       pr_addr(&con->peer_addr.in_addr), con->error_msg);
+	dout("fault %p state %lu to peer %s\n",
+	     con, con->state, pr_addr(&con->peer_addr.in_addr));
+
+	if (test_bit(LOSSYTX, &con->state)) {
+		dout("fault on LOSSYTX channel\n");
+		goto out;
+	}
+
+	clear_bit(BUSY, &con->state);  /* to avoid an improbable race */
+
+	mutex_lock(&con->mutex);
+	if (test_bit(CLOSED, &con->state))
+		goto out_unlock;
+
+	con_close_socket(con);
+
+	if (con->in_msg) {
+		ceph_msg_put(con->in_msg);
+		con->in_msg = NULL;
+	}
+
+	/* Requeue anything that hasn't been acked */
+	list_splice_init(&con->out_sent, &con->out_queue);
+
+	/* If there are no messages in the queue, place the connection
+	 * in a STANDBY state (i.e., don't try to reconnect just yet). */
+	if (list_empty(&con->out_queue) && !con->out_keepalive_pending) {
+		dout("fault setting STANDBY\n");
+		set_bit(STANDBY, &con->state);
+	} else {
+		/* retry after a delay. */
+		if (con->delay == 0)
+			con->delay = BASE_DELAY_INTERVAL;
+		else if (con->delay < MAX_DELAY_INTERVAL)
+			con->delay *= 2;
+		dout("fault queueing %p delay %lu\n", con, con->delay);
+		con->ops->get(con);
+		if (queue_delayed_work(ceph_msgr_wq, &con->work,
+				       round_jiffies_relative(con->delay)) == 0)
+			con->ops->put(con);
+	}
+
+out_unlock:
+	mutex_unlock(&con->mutex);
+out:
+	/*
+	 * in case we faulted due to authentication, invalidate our
+	 * current tickets so that we can get new ones.
+         */
+	if (con->auth_retry && con->ops->invalidate_authorizer) {
+		dout("calling invalidate_authorizer()\n");
+		con->ops->invalidate_authorizer(con);
+	}
+
+	if (con->ops->fault)
+		con->ops->fault(con);
+}
+
+
+
+/*
+ * create a new messenger instance
+ */
+struct ceph_messenger *ceph_messenger_create(struct ceph_entity_addr *myaddr)
+{
+	struct ceph_messenger *msgr;
+
+	msgr = kzalloc(sizeof(*msgr), GFP_KERNEL);
+	if (msgr == NULL)
+		return ERR_PTR(-ENOMEM);
+
+	spin_lock_init(&msgr->global_seq_lock);
+
+	/* the zero page is needed if a request is "canceled" while the message
+	 * is being written over the socket */
+	msgr->zero_page = alloc_page(GFP_KERNEL | __GFP_ZERO);
+	if (!msgr->zero_page) {
+		kfree(msgr);
+		return ERR_PTR(-ENOMEM);
+	}
+	kmap(msgr->zero_page);
+
+	if (myaddr)
+		msgr->inst.addr = *myaddr;
+
+	/* select a random nonce */
+	msgr->inst.addr.type = 0;
+	get_random_bytes(&msgr->inst.addr.nonce, sizeof(msgr->inst.addr.nonce));
+	encode_my_addr(msgr);
+
+	dout("messenger_create %p\n", msgr);
+	return msgr;
+}
+
+void ceph_messenger_destroy(struct ceph_messenger *msgr)
+{
+	dout("destroy %p\n", msgr);
+	kunmap(msgr->zero_page);
+	__free_page(msgr->zero_page);
+	kfree(msgr);
+	dout("destroyed messenger %p\n", msgr);
+}
+
+/*
+ * Queue up an outgoing message on the given connection.
+ */
+void ceph_con_send(struct ceph_connection *con, struct ceph_msg *msg)
+{
+	if (test_bit(CLOSED, &con->state)) {
+		dout("con_send %p closed, dropping %p\n", con, msg);
+		ceph_msg_put(msg);
+		return;
+	}
+
+	/* set src+dst */
+	msg->hdr.src.name = con->msgr->inst.name;
+	msg->hdr.src.addr = con->msgr->my_enc_addr;
+	msg->hdr.orig_src = msg->hdr.src;
+
+	BUG_ON(msg->front.iov_len != le32_to_cpu(msg->hdr.front_len));
+
+	/* queue */
+	mutex_lock(&con->mutex);
+	BUG_ON(!list_empty(&msg->list_head));
+	list_add_tail(&msg->list_head, &con->out_queue);
+	dout("----- %p to %s%lld %d=%s len %d+%d+%d -----\n", msg,
+	     ENTITY_NAME(con->peer_name), le16_to_cpu(msg->hdr.type),
+	     ceph_msg_type_name(le16_to_cpu(msg->hdr.type)),
+	     le32_to_cpu(msg->hdr.front_len),
+	     le32_to_cpu(msg->hdr.middle_len),
+	     le32_to_cpu(msg->hdr.data_len));
+	mutex_unlock(&con->mutex);
+
+	/* if there wasn't anything waiting to send before, queue
+	 * new work */
+	if (test_and_set_bit(WRITE_PENDING, &con->state) == 0)
+		queue_con(con);
+}
+
+/*
+ * Revoke a message that was previously queued for send
+ */
+void ceph_con_revoke(struct ceph_connection *con, struct ceph_msg *msg)
+{
+	mutex_lock(&con->mutex);
+	if (!list_empty(&msg->list_head)) {
+		dout("con_revoke %p msg %p\n", con, msg);
+		list_del_init(&msg->list_head);
+		ceph_msg_put(msg);
+		msg->hdr.seq = 0;
+		if (con->out_msg == msg) {
+			ceph_msg_put(con->out_msg);
+			con->out_msg = NULL;
+		}
+		if (con->out_kvec_is_msg) {
+			con->out_skip = con->out_kvec_bytes;
+			con->out_kvec_is_msg = false;
+		}
+	} else {
+		dout("con_revoke %p msg %p - not queued (sent?)\n", con, msg);
+	}
+	mutex_unlock(&con->mutex);
+}
+
+/*
+ * Revoke a message that we may be reading data into
+ */
+void ceph_con_revoke_message(struct ceph_connection *con, struct ceph_msg *msg)
+{
+	mutex_lock(&con->mutex);
+	if (con->in_msg && con->in_msg == msg) {
+		unsigned front_len = le32_to_cpu(con->in_hdr.front_len);
+		unsigned middle_len = le32_to_cpu(con->in_hdr.middle_len);
+		unsigned data_len = le32_to_cpu(con->in_hdr.data_len);
+
+		/* skip rest of message */
+		dout("con_revoke_pages %p msg %p revoked\n", con, msg);
+			con->in_base_pos = con->in_base_pos -
+				sizeof(struct ceph_msg_header) -
+				front_len -
+				middle_len -
+				data_len -
+				sizeof(struct ceph_msg_footer);
+		ceph_msg_put(con->in_msg);
+		con->in_msg = NULL;
+		con->in_tag = CEPH_MSGR_TAG_READY;
+	} else {
+		dout("con_revoke_pages %p msg %p pages %p no-op\n",
+		     con, con->in_msg, msg);
+	}
+	mutex_unlock(&con->mutex);
+}
+
+/*
+ * Queue a keepalive byte to ensure the tcp connection is alive.
+ */
+void ceph_con_keepalive(struct ceph_connection *con)
+{
+	if (test_and_set_bit(KEEPALIVE_PENDING, &con->state) == 0 &&
+	    test_and_set_bit(WRITE_PENDING, &con->state) == 0)
+		queue_con(con);
+}
+
+
+/*
+ * construct a new message with given type, size
+ * the new msg has a ref count of 1.
+ */
+struct ceph_msg *ceph_msg_new(int type, int front_len,
+			      int page_len, int page_off, struct page **pages)
+{
+	struct ceph_msg *m;
+
+	m = kmalloc(sizeof(*m), GFP_NOFS);
+	if (m == NULL)
+		goto out;
+	kref_init(&m->kref);
+	INIT_LIST_HEAD(&m->list_head);
+
+	m->hdr.type = cpu_to_le16(type);
+	m->hdr.front_len = cpu_to_le32(front_len);
+	m->hdr.middle_len = 0;
+	m->hdr.data_len = cpu_to_le32(page_len);
+	m->hdr.data_off = cpu_to_le16(page_off);
+	m->hdr.priority = cpu_to_le16(CEPH_MSG_PRIO_DEFAULT);
+	m->footer.front_crc = 0;
+	m->footer.middle_crc = 0;
+	m->footer.data_crc = 0;
+	m->front_max = front_len;
+	m->front_is_vmalloc = false;
+	m->more_to_follow = false;
+	m->pool = NULL;
+
+	/* front */
+	if (front_len) {
+		if (front_len > PAGE_CACHE_SIZE) {
+			m->front.iov_base = __vmalloc(front_len, GFP_NOFS,
+						      PAGE_KERNEL);
+			m->front_is_vmalloc = true;
+		} else {
+			m->front.iov_base = kmalloc(front_len, GFP_NOFS);
+		}
+		if (m->front.iov_base == NULL) {
+			pr_err("msg_new can't allocate %d bytes\n",
+			     front_len);
+			goto out2;
+		}
+	} else {
+		m->front.iov_base = NULL;
+	}
+	m->front.iov_len = front_len;
+
+	/* middle */
+	m->middle = NULL;
+
+	/* data */
+	m->nr_pages = calc_pages_for(page_off, page_len);
+	m->pages = pages;
+	m->pagelist = NULL;
+
+	dout("ceph_msg_new %p page %d~%d -> %d\n", m, page_off, page_len,
+	     m->nr_pages);
+	return m;
+
+out2:
+	ceph_msg_put(m);
+out:
+	pr_err("msg_new can't create type %d len %d\n", type, front_len);
+	return ERR_PTR(-ENOMEM);
+}
+
+/*
+ * Allocate "middle" portion of a message, if it is needed and wasn't
+ * allocated by alloc_msg.  This allows us to read a small fixed-size
+ * per-type header in the front and then gracefully fail (i.e.,
+ * propagate the error to the caller based on info in the front) when
+ * the middle is too large.
+ */
+static int ceph_alloc_middle(struct ceph_connection *con, struct ceph_msg *msg)
+{
+	int type = le16_to_cpu(msg->hdr.type);
+	int middle_len = le32_to_cpu(msg->hdr.middle_len);
+
+	dout("alloc_middle %p type %d %s middle_len %d\n", msg, type,
+	     ceph_msg_type_name(type), middle_len);
+	BUG_ON(!middle_len);
+	BUG_ON(msg->middle);
+
+	msg->middle = ceph_buffer_new(middle_len, GFP_NOFS);
+	if (!msg->middle)
+		return -ENOMEM;
+	return 0;
+}
+
+/*
+ * Generic message allocator, for incoming messages.
+ */
+static struct ceph_msg *ceph_alloc_msg(struct ceph_connection *con,
+				struct ceph_msg_header *hdr,
+				int *skip)
+{
+	int type = le16_to_cpu(hdr->type);
+	int front_len = le32_to_cpu(hdr->front_len);
+	int middle_len = le32_to_cpu(hdr->middle_len);
+	struct ceph_msg *msg = NULL;
+	int ret;
+
+	if (con->ops->alloc_msg) {
+		mutex_unlock(&con->mutex);
+		msg = con->ops->alloc_msg(con, hdr, skip);
+		mutex_lock(&con->mutex);
+		if (IS_ERR(msg))
+			return msg;
+
+		if (*skip)
+			return NULL;
+	}
+	if (!msg) {
+		*skip = 0;
+		msg = ceph_msg_new(type, front_len, 0, 0, NULL);
+		if (!msg) {
+			pr_err("unable to allocate msg type %d len %d\n",
+			       type, front_len);
+			return ERR_PTR(-ENOMEM);
+		}
+	}
+	memcpy(&msg->hdr, &con->in_hdr, sizeof(con->in_hdr));
+
+	if (middle_len) {
+		ret = ceph_alloc_middle(con, msg);
+
+		if (ret < 0) {
+			ceph_msg_put(msg);
+			return msg;
+		}
+	}
+
+	return msg;
+}
+
+
+/*
+ * Free a generically kmalloc'd message.
+ */
+void ceph_msg_kfree(struct ceph_msg *m)
+{
+	dout("msg_kfree %p\n", m);
+	if (m->front_is_vmalloc)
+		vfree(m->front.iov_base);
+	else
+		kfree(m->front.iov_base);
+	kfree(m);
+}
+
+/*
+ * Drop a msg ref.  Destroy as needed.
+ */
+void ceph_msg_last_put(struct kref *kref)
+{
+	struct ceph_msg *m = container_of(kref, struct ceph_msg, kref);
+
+	dout("ceph_msg_put last one on %p\n", m);
+	WARN_ON(!list_empty(&m->list_head));
+
+	/* drop middle, data, if any */
+	if (m->middle) {
+		ceph_buffer_put(m->middle);
+		m->middle = NULL;
+	}
+	m->nr_pages = 0;
+	m->pages = NULL;
+
+	if (m->pagelist) {
+		ceph_pagelist_release(m->pagelist);
+		kfree(m->pagelist);
+		m->pagelist = NULL;
+	}
+
+	if (m->pool)
+		ceph_msgpool_put(m->pool, m);
+	else
+		ceph_msg_kfree(m);
+}
+
+void ceph_msg_dump(struct ceph_msg *msg)
+{
+	pr_debug("msg_dump %p (front_max %d nr_pages %d)\n", msg,
+		 msg->front_max, msg->nr_pages);
+	print_hex_dump(KERN_DEBUG, "header: ",
+		       DUMP_PREFIX_OFFSET, 16, 1,
+		       &msg->hdr, sizeof(msg->hdr), true);
+	print_hex_dump(KERN_DEBUG, " front: ",
+		       DUMP_PREFIX_OFFSET, 16, 1,
+		       msg->front.iov_base, msg->front.iov_len, true);
+	if (msg->middle)
+		print_hex_dump(KERN_DEBUG, "middle: ",
+			       DUMP_PREFIX_OFFSET, 16, 1,
+			       msg->middle->vec.iov_base,
+			       msg->middle->vec.iov_len, true);
+	print_hex_dump(KERN_DEBUG, "footer: ",
+		       DUMP_PREFIX_OFFSET, 16, 1,
+		       &msg->footer, sizeof(msg->footer), true);
+}
diff --git a/fs/ceph/messenger.h b/fs/ceph/messenger.h
new file mode 100644
index 000000000000..4caaa5911110
--- /dev/null
+++ b/fs/ceph/messenger.h
@@ -0,0 +1,254 @@
+#ifndef __FS_CEPH_MESSENGER_H
+#define __FS_CEPH_MESSENGER_H
+
+#include <linux/kref.h>
+#include <linux/mutex.h>
+#include <linux/net.h>
+#include <linux/radix-tree.h>
+#include <linux/uio.h>
+#include <linux/version.h>
+#include <linux/workqueue.h>
+
+#include "types.h"
+#include "buffer.h"
+
+struct ceph_msg;
+struct ceph_connection;
+
+extern struct workqueue_struct *ceph_msgr_wq;       /* receive work queue */
+
+/*
+ * Ceph defines these callbacks for handling connection events.
+ */
+struct ceph_connection_operations {
+	struct ceph_connection *(*get)(struct ceph_connection *);
+	void (*put)(struct ceph_connection *);
+
+	/* handle an incoming message. */
+	void (*dispatch) (struct ceph_connection *con, struct ceph_msg *m);
+
+	/* authorize an outgoing connection */
+	int (*get_authorizer) (struct ceph_connection *con,
+			       void **buf, int *len, int *proto,
+			       void **reply_buf, int *reply_len, int force_new);
+	int (*verify_authorizer_reply) (struct ceph_connection *con, int len);
+	int (*invalidate_authorizer)(struct ceph_connection *con);
+
+	/* protocol version mismatch */
+	void (*bad_proto) (struct ceph_connection *con);
+
+	/* there was some error on the socket (disconnect, whatever) */
+	void (*fault) (struct ceph_connection *con);
+
+	/* a remote host as terminated a message exchange session, and messages
+	 * we sent (or they tried to send us) may be lost. */
+	void (*peer_reset) (struct ceph_connection *con);
+
+	struct ceph_msg * (*alloc_msg) (struct ceph_connection *con,
+					struct ceph_msg_header *hdr,
+					int *skip);
+};
+
+extern const char *ceph_name_type_str(int t);
+
+/* use format string %s%d */
+#define ENTITY_NAME(n) ceph_name_type_str((n).type), le64_to_cpu((n).num)
+
+struct ceph_messenger {
+	struct ceph_entity_inst inst;    /* my name+address */
+	struct ceph_entity_addr my_enc_addr;
+	struct page *zero_page;          /* used in certain error cases */
+
+	bool nocrc;
+
+	/*
+	 * the global_seq counts connections i (attempt to) initiate
+	 * in order to disambiguate certain connect race conditions.
+	 */
+	u32 global_seq;
+	spinlock_t global_seq_lock;
+};
+
+/*
+ * a single message.  it contains a header (src, dest, message type, etc.),
+ * footer (crc values, mainly), a "front" message body, and possibly a
+ * data payload (stored in some number of pages).
+ */
+struct ceph_msg {
+	struct ceph_msg_header hdr;	/* header */
+	struct ceph_msg_footer footer;	/* footer */
+	struct kvec front;              /* unaligned blobs of message */
+	struct ceph_buffer *middle;
+	struct page **pages;            /* data payload.  NOT OWNER. */
+	unsigned nr_pages;              /* size of page array */
+	struct ceph_pagelist *pagelist; /* instead of pages */
+	struct list_head list_head;
+	struct kref kref;
+	bool front_is_vmalloc;
+	bool more_to_follow;
+	int front_max;
+
+	struct ceph_msgpool *pool;
+};
+
+struct ceph_msg_pos {
+	int page, page_pos;  /* which page; offset in page */
+	int data_pos;        /* offset in data payload */
+	int did_page_crc;    /* true if we've calculated crc for current page */
+};
+
+/* ceph connection fault delay defaults, for exponential backoff */
+#define BASE_DELAY_INTERVAL	(HZ/2)
+#define MAX_DELAY_INTERVAL	(5 * 60 * HZ)
+
+/*
+ * ceph_connection state bit flags
+ *
+ * QUEUED and BUSY are used together to ensure that only a single
+ * thread is currently opening, reading or writing data to the socket.
+ */
+#define LOSSYTX         0  /* we can close channel or drop messages on errors */
+#define CONNECTING	1
+#define NEGOTIATING	2
+#define KEEPALIVE_PENDING      3
+#define WRITE_PENDING	4  /* we have data ready to send */
+#define QUEUED          5  /* there is work queued on this connection */
+#define BUSY            6  /* work is being done */
+#define STANDBY		8  /* no outgoing messages, socket closed.  we keep
+			    * the ceph_connection around to maintain shared
+			    * state with the peer. */
+#define CLOSED		10 /* we've closed the connection */
+#define SOCK_CLOSED	11 /* socket state changed to closed */
+#define OPENING         13 /* open connection w/ (possibly new) peer */
+#define DEAD            14 /* dead, about to kfree */
+
+/*
+ * A single connection with another host.
+ *
+ * We maintain a queue of outgoing messages, and some session state to
+ * ensure that we can preserve the lossless, ordered delivery of
+ * messages in the case of a TCP disconnect.
+ */
+struct ceph_connection {
+	void *private;
+	atomic_t nref;
+
+	const struct ceph_connection_operations *ops;
+
+	struct ceph_messenger *msgr;
+	struct socket *sock;
+	unsigned long state;	/* connection state (see flags above) */
+	const char *error_msg;  /* error message, if any */
+
+	struct ceph_entity_addr peer_addr; /* peer address */
+	struct ceph_entity_name peer_name; /* peer name */
+	struct ceph_entity_addr peer_addr_for_me;
+	u32 connect_seq;      /* identify the most recent connection
+				 attempt for this connection, client */
+	u32 peer_global_seq;  /* peer's global seq for this connection */
+
+	int auth_retry;       /* true if we need a newer authorizer */
+	void *auth_reply_buf;   /* where to put the authorizer reply */
+	int auth_reply_buf_len;
+
+	struct mutex mutex;
+
+	/* out queue */
+	struct list_head out_queue;
+	struct list_head out_sent;   /* sending or sent but unacked */
+	u64 out_seq;		     /* last message queued for send */
+	u64 out_seq_sent;            /* last message sent */
+	bool out_keepalive_pending;
+
+	u64 in_seq, in_seq_acked;  /* last message received, acked */
+
+	/* connection negotiation temps */
+	char in_banner[CEPH_BANNER_MAX_LEN];
+	union {
+		struct {  /* outgoing connection */
+			struct ceph_msg_connect out_connect;
+			struct ceph_msg_connect_reply in_reply;
+		};
+		struct {  /* incoming */
+			struct ceph_msg_connect in_connect;
+			struct ceph_msg_connect_reply out_reply;
+		};
+	};
+	struct ceph_entity_addr actual_peer_addr;
+
+	/* message out temps */
+	struct ceph_msg *out_msg;        /* sending message (== tail of
+					    out_sent) */
+	bool out_msg_done;
+	struct ceph_msg_pos out_msg_pos;
+
+	struct kvec out_kvec[8],         /* sending header/footer data */
+		*out_kvec_cur;
+	int out_kvec_left;   /* kvec's left in out_kvec */
+	int out_skip;        /* skip this many bytes */
+	int out_kvec_bytes;  /* total bytes left */
+	bool out_kvec_is_msg; /* kvec refers to out_msg */
+	int out_more;        /* there is more data after the kvecs */
+	__le64 out_temp_ack; /* for writing an ack */
+
+	/* message in temps */
+	struct ceph_msg_header in_hdr;
+	struct ceph_msg *in_msg;
+	struct ceph_msg_pos in_msg_pos;
+	u32 in_front_crc, in_middle_crc, in_data_crc;  /* calculated crc */
+
+	char in_tag;         /* protocol control byte */
+	int in_base_pos;     /* bytes read */
+	__le64 in_temp_ack;  /* for reading an ack */
+
+	struct delayed_work work;	    /* send|recv work */
+	unsigned long       delay;          /* current delay interval */
+};
+
+
+extern const char *pr_addr(const struct sockaddr_storage *ss);
+extern int ceph_parse_ips(const char *c, const char *end,
+			  struct ceph_entity_addr *addr,
+			  int max_count, int *count);
+
+
+extern int ceph_msgr_init(void);
+extern void ceph_msgr_exit(void);
+
+extern struct ceph_messenger *ceph_messenger_create(
+	struct ceph_entity_addr *myaddr);
+extern void ceph_messenger_destroy(struct ceph_messenger *);
+
+extern void ceph_con_init(struct ceph_messenger *msgr,
+			  struct ceph_connection *con);
+extern void ceph_con_open(struct ceph_connection *con,
+			  struct ceph_entity_addr *addr);
+extern void ceph_con_close(struct ceph_connection *con);
+extern void ceph_con_send(struct ceph_connection *con, struct ceph_msg *msg);
+extern void ceph_con_revoke(struct ceph_connection *con, struct ceph_msg *msg);
+extern void ceph_con_revoke_message(struct ceph_connection *con,
+				  struct ceph_msg *msg);
+extern void ceph_con_keepalive(struct ceph_connection *con);
+extern struct ceph_connection *ceph_con_get(struct ceph_connection *con);
+extern void ceph_con_put(struct ceph_connection *con);
+
+extern struct ceph_msg *ceph_msg_new(int type, int front_len,
+				     int page_len, int page_off,
+				     struct page **pages);
+extern void ceph_msg_kfree(struct ceph_msg *m);
+
+
+static inline struct ceph_msg *ceph_msg_get(struct ceph_msg *msg)
+{
+	kref_get(&msg->kref);
+	return msg;
+}
+extern void ceph_msg_last_put(struct kref *kref);
+static inline void ceph_msg_put(struct ceph_msg *msg)
+{
+	kref_put(&msg->kref, ceph_msg_last_put);
+}
+
+extern void ceph_msg_dump(struct ceph_msg *msg);
+
+#endif
diff --git a/fs/ceph/mon_client.c b/fs/ceph/mon_client.c
new file mode 100644
index 000000000000..890597c09d43
--- /dev/null
+++ b/fs/ceph/mon_client.c
@@ -0,0 +1,834 @@
+#include "ceph_debug.h"
+
+#include <linux/types.h>
+#include <linux/random.h>
+#include <linux/sched.h>
+
+#include "mon_client.h"
+#include "super.h"
+#include "auth.h"
+#include "decode.h"
+
+/*
+ * Interact with Ceph monitor cluster.  Handle requests for new map
+ * versions, and periodically resend as needed.  Also implement
+ * statfs() and umount().
+ *
+ * A small cluster of Ceph "monitors" are responsible for managing critical
+ * cluster configuration and state information.  An odd number (e.g., 3, 5)
+ * of cmon daemons use a modified version of the Paxos part-time parliament
+ * algorithm to manage the MDS map (mds cluster membership), OSD map, and
+ * list of clients who have mounted the file system.
+ *
+ * We maintain an open, active session with a monitor at all times in order to
+ * receive timely MDSMap updates.  We periodically send a keepalive byte on the
+ * TCP socket to ensure we detect a failure.  If the connection does break, we
+ * randomly hunt for a new monitor.  Once the connection is reestablished, we
+ * resend any outstanding requests.
+ */
+
+const static struct ceph_connection_operations mon_con_ops;
+
+static int __validate_auth(struct ceph_mon_client *monc);
+
+/*
+ * Decode a monmap blob (e.g., during mount).
+ */
+struct ceph_monmap *ceph_monmap_decode(void *p, void *end)
+{
+	struct ceph_monmap *m = NULL;
+	int i, err = -EINVAL;
+	struct ceph_fsid fsid;
+	u32 epoch, num_mon;
+	u16 version;
+	u32 len;
+
+	ceph_decode_32_safe(&p, end, len, bad);
+	ceph_decode_need(&p, end, len, bad);
+
+	dout("monmap_decode %p %p len %d\n", p, end, (int)(end-p));
+
+	ceph_decode_16_safe(&p, end, version, bad);
+
+	ceph_decode_need(&p, end, sizeof(fsid) + 2*sizeof(u32), bad);
+	ceph_decode_copy(&p, &fsid, sizeof(fsid));
+	epoch = ceph_decode_32(&p);
+
+	num_mon = ceph_decode_32(&p);
+	ceph_decode_need(&p, end, num_mon*sizeof(m->mon_inst[0]), bad);
+
+	if (num_mon >= CEPH_MAX_MON)
+		goto bad;
+	m = kmalloc(sizeof(*m) + sizeof(m->mon_inst[0])*num_mon, GFP_NOFS);
+	if (m == NULL)
+		return ERR_PTR(-ENOMEM);
+	m->fsid = fsid;
+	m->epoch = epoch;
+	m->num_mon = num_mon;
+	ceph_decode_copy(&p, m->mon_inst, num_mon*sizeof(m->mon_inst[0]));
+	for (i = 0; i < num_mon; i++)
+		ceph_decode_addr(&m->mon_inst[i].addr);
+
+	dout("monmap_decode epoch %d, num_mon %d\n", m->epoch,
+	     m->num_mon);
+	for (i = 0; i < m->num_mon; i++)
+		dout("monmap_decode  mon%d is %s\n", i,
+		     pr_addr(&m->mon_inst[i].addr.in_addr));
+	return m;
+
+bad:
+	dout("monmap_decode failed with %d\n", err);
+	kfree(m);
+	return ERR_PTR(err);
+}
+
+/*
+ * return true if *addr is included in the monmap.
+ */
+int ceph_monmap_contains(struct ceph_monmap *m, struct ceph_entity_addr *addr)
+{
+	int i;
+
+	for (i = 0; i < m->num_mon; i++)
+		if (memcmp(addr, &m->mon_inst[i].addr, sizeof(*addr)) == 0)
+			return 1;
+	return 0;
+}
+
+/*
+ * Send an auth request.
+ */
+static void __send_prepared_auth_request(struct ceph_mon_client *monc, int len)
+{
+	monc->pending_auth = 1;
+	monc->m_auth->front.iov_len = len;
+	monc->m_auth->hdr.front_len = cpu_to_le32(len);
+	ceph_msg_get(monc->m_auth);  /* keep our ref */
+	ceph_con_send(monc->con, monc->m_auth);
+}
+
+/*
+ * Close monitor session, if any.
+ */
+static void __close_session(struct ceph_mon_client *monc)
+{
+	if (monc->con) {
+		dout("__close_session closing mon%d\n", monc->cur_mon);
+		ceph_con_revoke(monc->con, monc->m_auth);
+		ceph_con_close(monc->con);
+		monc->cur_mon = -1;
+		monc->pending_auth = 0;
+		ceph_auth_reset(monc->auth);
+	}
+}
+
+/*
+ * Open a session with a (new) monitor.
+ */
+static int __open_session(struct ceph_mon_client *monc)
+{
+	char r;
+	int ret;
+
+	if (monc->cur_mon < 0) {
+		get_random_bytes(&r, 1);
+		monc->cur_mon = r % monc->monmap->num_mon;
+		dout("open_session num=%d r=%d -> mon%d\n",
+		     monc->monmap->num_mon, r, monc->cur_mon);
+		monc->sub_sent = 0;
+		monc->sub_renew_after = jiffies;  /* i.e., expired */
+		monc->want_next_osdmap = !!monc->want_next_osdmap;
+
+		dout("open_session mon%d opening\n", monc->cur_mon);
+		monc->con->peer_name.type = CEPH_ENTITY_TYPE_MON;
+		monc->con->peer_name.num = cpu_to_le64(monc->cur_mon);
+		ceph_con_open(monc->con,
+			      &monc->monmap->mon_inst[monc->cur_mon].addr);
+
+		/* initiatiate authentication handshake */
+		ret = ceph_auth_build_hello(monc->auth,
+					    monc->m_auth->front.iov_base,
+					    monc->m_auth->front_max);
+		__send_prepared_auth_request(monc, ret);
+	} else {
+		dout("open_session mon%d already open\n", monc->cur_mon);
+	}
+	return 0;
+}
+
+static bool __sub_expired(struct ceph_mon_client *monc)
+{
+	return time_after_eq(jiffies, monc->sub_renew_after);
+}
+
+/*
+ * Reschedule delayed work timer.
+ */
+static void __schedule_delayed(struct ceph_mon_client *monc)
+{
+	unsigned delay;
+
+	if (monc->cur_mon < 0 || __sub_expired(monc))
+		delay = 10 * HZ;
+	else
+		delay = 20 * HZ;
+	dout("__schedule_delayed after %u\n", delay);
+	schedule_delayed_work(&monc->delayed_work, delay);
+}
+
+/*
+ * Send subscribe request for mdsmap and/or osdmap.
+ */
+static void __send_subscribe(struct ceph_mon_client *monc)
+{
+	dout("__send_subscribe sub_sent=%u exp=%u want_osd=%d\n",
+	     (unsigned)monc->sub_sent, __sub_expired(monc),
+	     monc->want_next_osdmap);
+	if ((__sub_expired(monc) && !monc->sub_sent) ||
+	    monc->want_next_osdmap == 1) {
+		struct ceph_msg *msg;
+		struct ceph_mon_subscribe_item *i;
+		void *p, *end;
+
+		msg = ceph_msg_new(CEPH_MSG_MON_SUBSCRIBE, 96, 0, 0, NULL);
+		if (!msg)
+			return;
+
+		p = msg->front.iov_base;
+		end = p + msg->front.iov_len;
+
+		dout("__send_subscribe to 'mdsmap' %u+\n",
+		     (unsigned)monc->have_mdsmap);
+		if (monc->want_next_osdmap) {
+			dout("__send_subscribe to 'osdmap' %u\n",
+			     (unsigned)monc->have_osdmap);
+			ceph_encode_32(&p, 3);
+			ceph_encode_string(&p, end, "osdmap", 6);
+			i = p;
+			i->have = cpu_to_le64(monc->have_osdmap);
+			i->onetime = 1;
+			p += sizeof(*i);
+			monc->want_next_osdmap = 2;  /* requested */
+		} else {
+			ceph_encode_32(&p, 2);
+		}
+		ceph_encode_string(&p, end, "mdsmap", 6);
+		i = p;
+		i->have = cpu_to_le64(monc->have_mdsmap);
+		i->onetime = 0;
+		p += sizeof(*i);
+		ceph_encode_string(&p, end, "monmap", 6);
+		i = p;
+		i->have = 0;
+		i->onetime = 0;
+		p += sizeof(*i);
+
+		msg->front.iov_len = p - msg->front.iov_base;
+		msg->hdr.front_len = cpu_to_le32(msg->front.iov_len);
+		ceph_con_send(monc->con, msg);
+
+		monc->sub_sent = jiffies | 1;  /* never 0 */
+	}
+}
+
+static void handle_subscribe_ack(struct ceph_mon_client *monc,
+				 struct ceph_msg *msg)
+{
+	unsigned seconds;
+	struct ceph_mon_subscribe_ack *h = msg->front.iov_base;
+
+	if (msg->front.iov_len < sizeof(*h))
+		goto bad;
+	seconds = le32_to_cpu(h->duration);
+
+	mutex_lock(&monc->mutex);
+	if (monc->hunting) {
+		pr_info("mon%d %s session established\n",
+			monc->cur_mon, pr_addr(&monc->con->peer_addr.in_addr));
+		monc->hunting = false;
+	}
+	dout("handle_subscribe_ack after %d seconds\n", seconds);
+	monc->sub_renew_after = monc->sub_sent + (seconds >> 1)*HZ - 1;
+	monc->sub_sent = 0;
+	mutex_unlock(&monc->mutex);
+	return;
+bad:
+	pr_err("got corrupt subscribe-ack msg\n");
+	ceph_msg_dump(msg);
+}
+
+/*
+ * Keep track of which maps we have
+ */
+int ceph_monc_got_mdsmap(struct ceph_mon_client *monc, u32 got)
+{
+	mutex_lock(&monc->mutex);
+	monc->have_mdsmap = got;
+	mutex_unlock(&monc->mutex);
+	return 0;
+}
+
+int ceph_monc_got_osdmap(struct ceph_mon_client *monc, u32 got)
+{
+	mutex_lock(&monc->mutex);
+	monc->have_osdmap = got;
+	monc->want_next_osdmap = 0;
+	mutex_unlock(&monc->mutex);
+	return 0;
+}
+
+/*
+ * Register interest in the next osdmap
+ */
+void ceph_monc_request_next_osdmap(struct ceph_mon_client *monc)
+{
+	dout("request_next_osdmap have %u\n", monc->have_osdmap);
+	mutex_lock(&monc->mutex);
+	if (!monc->want_next_osdmap)
+		monc->want_next_osdmap = 1;
+	if (monc->want_next_osdmap < 2)
+		__send_subscribe(monc);
+	mutex_unlock(&monc->mutex);
+}
+
+/*
+ *
+ */
+int ceph_monc_open_session(struct ceph_mon_client *monc)
+{
+	if (!monc->con) {
+		monc->con = kmalloc(sizeof(*monc->con), GFP_KERNEL);
+		if (!monc->con)
+			return -ENOMEM;
+		ceph_con_init(monc->client->msgr, monc->con);
+		monc->con->private = monc;
+		monc->con->ops = &mon_con_ops;
+	}
+
+	mutex_lock(&monc->mutex);
+	__open_session(monc);
+	__schedule_delayed(monc);
+	mutex_unlock(&monc->mutex);
+	return 0;
+}
+
+/*
+ * The monitor responds with mount ack indicate mount success.  The
+ * included client ticket allows the client to talk to MDSs and OSDs.
+ */
+static void ceph_monc_handle_map(struct ceph_mon_client *monc,
+				 struct ceph_msg *msg)
+{
+	struct ceph_client *client = monc->client;
+	struct ceph_monmap *monmap = NULL, *old = monc->monmap;
+	void *p, *end;
+
+	mutex_lock(&monc->mutex);
+
+	dout("handle_monmap\n");
+	p = msg->front.iov_base;
+	end = p + msg->front.iov_len;
+
+	monmap = ceph_monmap_decode(p, end);
+	if (IS_ERR(monmap)) {
+		pr_err("problem decoding monmap, %d\n",
+		       (int)PTR_ERR(monmap));
+		goto out;
+	}
+
+	if (ceph_check_fsid(monc->client, &monmap->fsid) < 0) {
+		kfree(monmap);
+		goto out;
+	}
+
+	client->monc.monmap = monmap;
+	kfree(old);
+
+out:
+	mutex_unlock(&monc->mutex);
+	wake_up(&client->auth_wq);
+}
+
+/*
+ * statfs
+ */
+static struct ceph_mon_statfs_request *__lookup_statfs(
+	struct ceph_mon_client *monc, u64 tid)
+{
+	struct ceph_mon_statfs_request *req;
+	struct rb_node *n = monc->statfs_request_tree.rb_node;
+
+	while (n) {
+		req = rb_entry(n, struct ceph_mon_statfs_request, node);
+		if (tid < req->tid)
+			n = n->rb_left;
+		else if (tid > req->tid)
+			n = n->rb_right;
+		else
+			return req;
+	}
+	return NULL;
+}
+
+static void __insert_statfs(struct ceph_mon_client *monc,
+			    struct ceph_mon_statfs_request *new)
+{
+	struct rb_node **p = &monc->statfs_request_tree.rb_node;
+	struct rb_node *parent = NULL;
+	struct ceph_mon_statfs_request *req = NULL;
+
+	while (*p) {
+		parent = *p;
+		req = rb_entry(parent, struct ceph_mon_statfs_request, node);
+		if (new->tid < req->tid)
+			p = &(*p)->rb_left;
+		else if (new->tid > req->tid)
+			p = &(*p)->rb_right;
+		else
+			BUG();
+	}
+
+	rb_link_node(&new->node, parent, p);
+	rb_insert_color(&new->node, &monc->statfs_request_tree);
+}
+
+static void handle_statfs_reply(struct ceph_mon_client *monc,
+				struct ceph_msg *msg)
+{
+	struct ceph_mon_statfs_request *req;
+	struct ceph_mon_statfs_reply *reply = msg->front.iov_base;
+	u64 tid;
+
+	if (msg->front.iov_len != sizeof(*reply))
+		goto bad;
+	tid = le64_to_cpu(msg->hdr.tid);
+	dout("handle_statfs_reply %p tid %llu\n", msg, tid);
+
+	mutex_lock(&monc->mutex);
+	req = __lookup_statfs(monc, tid);
+	if (req) {
+		*req->buf = reply->st;
+		req->result = 0;
+	}
+	mutex_unlock(&monc->mutex);
+	if (req)
+		complete(&req->completion);
+	return;
+
+bad:
+	pr_err("corrupt statfs reply, no tid\n");
+	ceph_msg_dump(msg);
+}
+
+/*
+ * (re)send a statfs request
+ */
+static int send_statfs(struct ceph_mon_client *monc,
+		       struct ceph_mon_statfs_request *req)
+{
+	struct ceph_msg *msg;
+	struct ceph_mon_statfs *h;
+
+	dout("send_statfs tid %llu\n", req->tid);
+	msg = ceph_msg_new(CEPH_MSG_STATFS, sizeof(*h), 0, 0, NULL);
+	if (IS_ERR(msg))
+		return PTR_ERR(msg);
+	req->request = msg;
+	msg->hdr.tid = cpu_to_le64(req->tid);
+	h = msg->front.iov_base;
+	h->monhdr.have_version = 0;
+	h->monhdr.session_mon = cpu_to_le16(-1);
+	h->monhdr.session_mon_tid = 0;
+	h->fsid = monc->monmap->fsid;
+	ceph_con_send(monc->con, msg);
+	return 0;
+}
+
+/*
+ * Do a synchronous statfs().
+ */
+int ceph_monc_do_statfs(struct ceph_mon_client *monc, struct ceph_statfs *buf)
+{
+	struct ceph_mon_statfs_request req;
+	int err;
+
+	req.buf = buf;
+	init_completion(&req.completion);
+
+	/* allocate memory for reply */
+	err = ceph_msgpool_resv(&monc->msgpool_statfs_reply, 1);
+	if (err)
+		return err;
+
+	/* register request */
+	mutex_lock(&monc->mutex);
+	req.tid = ++monc->last_tid;
+	req.last_attempt = jiffies;
+	req.delay = BASE_DELAY_INTERVAL;
+	__insert_statfs(monc, &req);
+	monc->num_statfs_requests++;
+	mutex_unlock(&monc->mutex);
+
+	/* send request and wait */
+	err = send_statfs(monc, &req);
+	if (!err)
+		err = wait_for_completion_interruptible(&req.completion);
+
+	mutex_lock(&monc->mutex);
+	rb_erase(&req.node, &monc->statfs_request_tree);
+	monc->num_statfs_requests--;
+	ceph_msgpool_resv(&monc->msgpool_statfs_reply, -1);
+	mutex_unlock(&monc->mutex);
+
+	if (!err)
+		err = req.result;
+	return err;
+}
+
+/*
+ * Resend pending statfs requests.
+ */
+static void __resend_statfs(struct ceph_mon_client *monc)
+{
+	struct ceph_mon_statfs_request *req;
+	struct rb_node *p;
+
+	for (p = rb_first(&monc->statfs_request_tree); p; p = rb_next(p)) {
+		req = rb_entry(p, struct ceph_mon_statfs_request, node);
+		send_statfs(monc, req);
+	}
+}
+
+/*
+ * Delayed work.  If we haven't mounted yet, retry.  Otherwise,
+ * renew/retry subscription as needed (in case it is timing out, or we
+ * got an ENOMEM).  And keep the monitor connection alive.
+ */
+static void delayed_work(struct work_struct *work)
+{
+	struct ceph_mon_client *monc =
+		container_of(work, struct ceph_mon_client, delayed_work.work);
+
+	dout("monc delayed_work\n");
+	mutex_lock(&monc->mutex);
+	if (monc->hunting) {
+		__close_session(monc);
+		__open_session(monc);  /* continue hunting */
+	} else {
+		ceph_con_keepalive(monc->con);
+
+		__validate_auth(monc);
+
+		if (monc->auth->ops->is_authenticated(monc->auth))
+			__send_subscribe(monc);
+	}
+	__schedule_delayed(monc);
+	mutex_unlock(&monc->mutex);
+}
+
+/*
+ * On startup, we build a temporary monmap populated with the IPs
+ * provided by mount(2).
+ */
+static int build_initial_monmap(struct ceph_mon_client *monc)
+{
+	struct ceph_mount_args *args = monc->client->mount_args;
+	struct ceph_entity_addr *mon_addr = args->mon_addr;
+	int num_mon = args->num_mon;
+	int i;
+
+	/* build initial monmap */
+	monc->monmap = kzalloc(sizeof(*monc->monmap) +
+			       num_mon*sizeof(monc->monmap->mon_inst[0]),
+			       GFP_KERNEL);
+	if (!monc->monmap)
+		return -ENOMEM;
+	for (i = 0; i < num_mon; i++) {
+		monc->monmap->mon_inst[i].addr = mon_addr[i];
+		monc->monmap->mon_inst[i].addr.nonce = 0;
+		monc->monmap->mon_inst[i].name.type =
+			CEPH_ENTITY_TYPE_MON;
+		monc->monmap->mon_inst[i].name.num = cpu_to_le64(i);
+	}
+	monc->monmap->num_mon = num_mon;
+	monc->have_fsid = false;
+
+	/* release addr memory */
+	kfree(args->mon_addr);
+	args->mon_addr = NULL;
+	args->num_mon = 0;
+	return 0;
+}
+
+int ceph_monc_init(struct ceph_mon_client *monc, struct ceph_client *cl)
+{
+	int err = 0;
+
+	dout("init\n");
+	memset(monc, 0, sizeof(*monc));
+	monc->client = cl;
+	monc->monmap = NULL;
+	mutex_init(&monc->mutex);
+
+	err = build_initial_monmap(monc);
+	if (err)
+		goto out;
+
+	monc->con = NULL;
+
+	/* authentication */
+	monc->auth = ceph_auth_init(cl->mount_args->name,
+				    cl->mount_args->secret);
+	if (IS_ERR(monc->auth))
+		return PTR_ERR(monc->auth);
+	monc->auth->want_keys =
+		CEPH_ENTITY_TYPE_AUTH | CEPH_ENTITY_TYPE_MON |
+		CEPH_ENTITY_TYPE_OSD | CEPH_ENTITY_TYPE_MDS;
+
+	/* msg pools */
+	err = ceph_msgpool_init(&monc->msgpool_subscribe_ack,
+			       sizeof(struct ceph_mon_subscribe_ack), 1, false);
+	if (err < 0)
+		goto out_monmap;
+	err = ceph_msgpool_init(&monc->msgpool_statfs_reply,
+				sizeof(struct ceph_mon_statfs_reply), 0, false);
+	if (err < 0)
+		goto out_pool1;
+	err = ceph_msgpool_init(&monc->msgpool_auth_reply, 4096, 1, false);
+	if (err < 0)
+		goto out_pool2;
+
+	monc->m_auth = ceph_msg_new(CEPH_MSG_AUTH, 4096, 0, 0, NULL);
+	monc->pending_auth = 0;
+	if (IS_ERR(monc->m_auth)) {
+		err = PTR_ERR(monc->m_auth);
+		monc->m_auth = NULL;
+		goto out_pool3;
+	}
+
+	monc->cur_mon = -1;
+	monc->hunting = true;
+	monc->sub_renew_after = jiffies;
+	monc->sub_sent = 0;
+
+	INIT_DELAYED_WORK(&monc->delayed_work, delayed_work);
+	monc->statfs_request_tree = RB_ROOT;
+	monc->num_statfs_requests = 0;
+	monc->last_tid = 0;
+
+	monc->have_mdsmap = 0;
+	monc->have_osdmap = 0;
+	monc->want_next_osdmap = 1;
+	return 0;
+
+out_pool3:
+	ceph_msgpool_destroy(&monc->msgpool_auth_reply);
+out_pool2:
+	ceph_msgpool_destroy(&monc->msgpool_subscribe_ack);
+out_pool1:
+	ceph_msgpool_destroy(&monc->msgpool_statfs_reply);
+out_monmap:
+	kfree(monc->monmap);
+out:
+	return err;
+}
+
+void ceph_monc_stop(struct ceph_mon_client *monc)
+{
+	dout("stop\n");
+	cancel_delayed_work_sync(&monc->delayed_work);
+
+	mutex_lock(&monc->mutex);
+	__close_session(monc);
+	if (monc->con) {
+		monc->con->private = NULL;
+		monc->con->ops->put(monc->con);
+		monc->con = NULL;
+	}
+	mutex_unlock(&monc->mutex);
+
+	ceph_auth_destroy(monc->auth);
+
+	ceph_msg_put(monc->m_auth);
+	ceph_msgpool_destroy(&monc->msgpool_subscribe_ack);
+	ceph_msgpool_destroy(&monc->msgpool_statfs_reply);
+	ceph_msgpool_destroy(&monc->msgpool_auth_reply);
+
+	kfree(monc->monmap);
+}
+
+static void handle_auth_reply(struct ceph_mon_client *monc,
+			      struct ceph_msg *msg)
+{
+	int ret;
+
+	mutex_lock(&monc->mutex);
+	monc->pending_auth = 0;
+	ret = ceph_handle_auth_reply(monc->auth, msg->front.iov_base,
+				     msg->front.iov_len,
+				     monc->m_auth->front.iov_base,
+				     monc->m_auth->front_max);
+	if (ret < 0) {
+		monc->client->auth_err = ret;
+		wake_up(&monc->client->auth_wq);
+	} else if (ret > 0) {
+		__send_prepared_auth_request(monc, ret);
+	} else if (monc->auth->ops->is_authenticated(monc->auth)) {
+		dout("authenticated, starting session\n");
+
+		monc->client->msgr->inst.name.type = CEPH_ENTITY_TYPE_CLIENT;
+		monc->client->msgr->inst.name.num = monc->auth->global_id;
+
+		__send_subscribe(monc);
+		__resend_statfs(monc);
+	}
+	mutex_unlock(&monc->mutex);
+}
+
+static int __validate_auth(struct ceph_mon_client *monc)
+{
+	int ret;
+
+	if (monc->pending_auth)
+		return 0;
+
+	ret = ceph_build_auth(monc->auth, monc->m_auth->front.iov_base,
+			      monc->m_auth->front_max);
+	if (ret <= 0)
+		return ret; /* either an error, or no need to authenticate */
+	__send_prepared_auth_request(monc, ret);
+	return 0;
+}
+
+int ceph_monc_validate_auth(struct ceph_mon_client *monc)
+{
+	int ret;
+
+	mutex_lock(&monc->mutex);
+	ret = __validate_auth(monc);
+	mutex_unlock(&monc->mutex);
+	return ret;
+}
+
+/*
+ * handle incoming message
+ */
+static void dispatch(struct ceph_connection *con, struct ceph_msg *msg)
+{
+	struct ceph_mon_client *monc = con->private;
+	int type = le16_to_cpu(msg->hdr.type);
+
+	if (!monc)
+		return;
+
+	switch (type) {
+	case CEPH_MSG_AUTH_REPLY:
+		handle_auth_reply(monc, msg);
+		break;
+
+	case CEPH_MSG_MON_SUBSCRIBE_ACK:
+		handle_subscribe_ack(monc, msg);
+		break;
+
+	case CEPH_MSG_STATFS_REPLY:
+		handle_statfs_reply(monc, msg);
+		break;
+
+	case CEPH_MSG_MON_MAP:
+		ceph_monc_handle_map(monc, msg);
+		break;
+
+	case CEPH_MSG_MDS_MAP:
+		ceph_mdsc_handle_map(&monc->client->mdsc, msg);
+		break;
+
+	case CEPH_MSG_OSD_MAP:
+		ceph_osdc_handle_map(&monc->client->osdc, msg);
+		break;
+
+	default:
+		pr_err("received unknown message type %d %s\n", type,
+		       ceph_msg_type_name(type));
+	}
+	ceph_msg_put(msg);
+}
+
+/*
+ * Allocate memory for incoming message
+ */
+static struct ceph_msg *mon_alloc_msg(struct ceph_connection *con,
+				      struct ceph_msg_header *hdr,
+				      int *skip)
+{
+	struct ceph_mon_client *monc = con->private;
+	int type = le16_to_cpu(hdr->type);
+	int front_len = le32_to_cpu(hdr->front_len);
+	struct ceph_msg *m = NULL;
+
+	*skip = 0;
+
+	switch (type) {
+	case CEPH_MSG_MON_SUBSCRIBE_ACK:
+		m = ceph_msgpool_get(&monc->msgpool_subscribe_ack, front_len);
+		break;
+	case CEPH_MSG_STATFS_REPLY:
+		m = ceph_msgpool_get(&monc->msgpool_statfs_reply, front_len);
+		break;
+	case CEPH_MSG_AUTH_REPLY:
+		m = ceph_msgpool_get(&monc->msgpool_auth_reply, front_len);
+		break;
+	case CEPH_MSG_MON_MAP:
+	case CEPH_MSG_MDS_MAP:
+	case CEPH_MSG_OSD_MAP:
+		m = ceph_msg_new(type, front_len, 0, 0, NULL);
+		break;
+	}
+
+	if (!m) {
+		pr_info("alloc_msg unknown type %d\n", type);
+		*skip = 1;
+	}
+	return m;
+}
+
+/*
+ * If the monitor connection resets, pick a new monitor and resubmit
+ * any pending requests.
+ */
+static void mon_fault(struct ceph_connection *con)
+{
+	struct ceph_mon_client *monc = con->private;
+
+	if (!monc)
+		return;
+
+	dout("mon_fault\n");
+	mutex_lock(&monc->mutex);
+	if (!con->private)
+		goto out;
+
+	if (monc->con && !monc->hunting)
+		pr_info("mon%d %s session lost, "
+			"hunting for new mon\n", monc->cur_mon,
+			pr_addr(&monc->con->peer_addr.in_addr));
+
+	__close_session(monc);
+	if (!monc->hunting) {
+		/* start hunting */
+		monc->hunting = true;
+		__open_session(monc);
+	} else {
+		/* already hunting, let's wait a bit */
+		__schedule_delayed(monc);
+	}
+out:
+	mutex_unlock(&monc->mutex);
+}
+
+const static struct ceph_connection_operations mon_con_ops = {
+	.get = ceph_con_get,
+	.put = ceph_con_put,
+	.dispatch = dispatch,
+	.fault = mon_fault,
+	.alloc_msg = mon_alloc_msg,
+};
diff --git a/fs/ceph/mon_client.h b/fs/ceph/mon_client.h
new file mode 100644
index 000000000000..b958ad5afa06
--- /dev/null
+++ b/fs/ceph/mon_client.h
@@ -0,0 +1,119 @@
+#ifndef _FS_CEPH_MON_CLIENT_H
+#define _FS_CEPH_MON_CLIENT_H
+
+#include <linux/completion.h>
+#include <linux/rbtree.h>
+
+#include "messenger.h"
+#include "msgpool.h"
+
+struct ceph_client;
+struct ceph_mount_args;
+struct ceph_auth_client;
+
+/*
+ * The monitor map enumerates the set of all monitors.
+ */
+struct ceph_monmap {
+	struct ceph_fsid fsid;
+	u32 epoch;
+	u32 num_mon;
+	struct ceph_entity_inst mon_inst[0];
+};
+
+struct ceph_mon_client;
+struct ceph_mon_statfs_request;
+
+
+/*
+ * Generic mechanism for resending monitor requests.
+ */
+typedef void (*ceph_monc_request_func_t)(struct ceph_mon_client *monc,
+					 int newmon);
+
+/* a pending monitor request */
+struct ceph_mon_request {
+	struct ceph_mon_client *monc;
+	struct delayed_work delayed_work;
+	unsigned long delay;
+	ceph_monc_request_func_t do_request;
+};
+
+/*
+ * statfs() is done a bit differently because we need to get data back
+ * to the caller
+ */
+struct ceph_mon_statfs_request {
+	u64 tid;
+	struct rb_node node;
+	int result;
+	struct ceph_statfs *buf;
+	struct completion completion;
+	unsigned long last_attempt, delay; /* jiffies */
+	struct ceph_msg *request;  /* original request */
+};
+
+struct ceph_mon_client {
+	struct ceph_client *client;
+	struct ceph_monmap *monmap;
+
+	struct mutex mutex;
+	struct delayed_work delayed_work;
+
+	struct ceph_auth_client *auth;
+	struct ceph_msg *m_auth;
+	int pending_auth;
+
+	bool hunting;
+	int cur_mon;                       /* last monitor i contacted */
+	unsigned long sub_sent, sub_renew_after;
+	struct ceph_connection *con;
+	bool have_fsid;
+
+	/* msg pools */
+	struct ceph_msgpool msgpool_subscribe_ack;
+	struct ceph_msgpool msgpool_statfs_reply;
+	struct ceph_msgpool msgpool_auth_reply;
+
+	/* pending statfs requests */
+	struct rb_root statfs_request_tree;
+	int num_statfs_requests;
+	u64 last_tid;
+
+	/* mds/osd map */
+	int want_next_osdmap; /* 1 = want, 2 = want+asked */
+	u32 have_osdmap, have_mdsmap;
+
+#ifdef CONFIG_DEBUG_FS
+	struct dentry *debugfs_file;
+#endif
+};
+
+extern struct ceph_monmap *ceph_monmap_decode(void *p, void *end);
+extern int ceph_monmap_contains(struct ceph_monmap *m,
+				struct ceph_entity_addr *addr);
+
+extern int ceph_monc_init(struct ceph_mon_client *monc, struct ceph_client *cl);
+extern void ceph_monc_stop(struct ceph_mon_client *monc);
+
+/*
+ * The model here is to indicate that we need a new map of at least
+ * epoch @want, and also call in when we receive a map.  We will
+ * periodically rerequest the map from the monitor cluster until we
+ * get what we want.
+ */
+extern int ceph_monc_got_mdsmap(struct ceph_mon_client *monc, u32 have);
+extern int ceph_monc_got_osdmap(struct ceph_mon_client *monc, u32 have);
+
+extern void ceph_monc_request_next_osdmap(struct ceph_mon_client *monc);
+
+extern int ceph_monc_do_statfs(struct ceph_mon_client *monc,
+			       struct ceph_statfs *buf);
+
+extern int ceph_monc_open_session(struct ceph_mon_client *monc);
+
+extern int ceph_monc_validate_auth(struct ceph_mon_client *monc);
+
+
+
+#endif
diff --git a/fs/ceph/msgpool.c b/fs/ceph/msgpool.c
new file mode 100644
index 000000000000..ca3b44a89f2d
--- /dev/null
+++ b/fs/ceph/msgpool.c
@@ -0,0 +1,186 @@
+#include "ceph_debug.h"
+
+#include <linux/err.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/vmalloc.h>
+
+#include "msgpool.h"
+
+/*
+ * We use msg pools to preallocate memory for messages we expect to
+ * receive over the wire, to avoid getting ourselves into OOM
+ * conditions at unexpected times.  We take use a few different
+ * strategies:
+ *
+ *  - for request/response type interactions, we preallocate the
+ * memory needed for the response when we generate the request.
+ *
+ *  - for messages we can receive at any time from the MDS, we preallocate
+ * a pool of messages we can re-use.
+ *
+ *  - for writeback, we preallocate some number of messages to use for
+ * requests and their replies, so that we always make forward
+ * progress.
+ *
+ * The msgpool behaves like a mempool_t, but keeps preallocated
+ * ceph_msgs strung together on a list_head instead of using a pointer
+ * vector.  This avoids vector reallocation when we adjust the number
+ * of preallocated items (which happens frequently).
+ */
+
+
+/*
+ * Allocate or release as necessary to meet our target pool size.
+ */
+static int __fill_msgpool(struct ceph_msgpool *pool)
+{
+	struct ceph_msg *msg;
+
+	while (pool->num < pool->min) {
+		dout("fill_msgpool %p %d/%d allocating\n", pool, pool->num,
+		     pool->min);
+		spin_unlock(&pool->lock);
+		msg = ceph_msg_new(0, pool->front_len, 0, 0, NULL);
+		spin_lock(&pool->lock);
+		if (IS_ERR(msg))
+			return PTR_ERR(msg);
+		msg->pool = pool;
+		list_add(&msg->list_head, &pool->msgs);
+		pool->num++;
+	}
+	while (pool->num > pool->min) {
+		msg = list_first_entry(&pool->msgs, struct ceph_msg, list_head);
+		dout("fill_msgpool %p %d/%d releasing %p\n", pool, pool->num,
+		     pool->min, msg);
+		list_del_init(&msg->list_head);
+		pool->num--;
+		ceph_msg_kfree(msg);
+	}
+	return 0;
+}
+
+int ceph_msgpool_init(struct ceph_msgpool *pool,
+		      int front_len, int min, bool blocking)
+{
+	int ret;
+
+	dout("msgpool_init %p front_len %d min %d\n", pool, front_len, min);
+	spin_lock_init(&pool->lock);
+	pool->front_len = front_len;
+	INIT_LIST_HEAD(&pool->msgs);
+	pool->num = 0;
+	pool->min = min;
+	pool->blocking = blocking;
+	init_waitqueue_head(&pool->wait);
+
+	spin_lock(&pool->lock);
+	ret = __fill_msgpool(pool);
+	spin_unlock(&pool->lock);
+	return ret;
+}
+
+void ceph_msgpool_destroy(struct ceph_msgpool *pool)
+{
+	dout("msgpool_destroy %p\n", pool);
+	spin_lock(&pool->lock);
+	pool->min = 0;
+	__fill_msgpool(pool);
+	spin_unlock(&pool->lock);
+}
+
+int ceph_msgpool_resv(struct ceph_msgpool *pool, int delta)
+{
+	int ret;
+
+	spin_lock(&pool->lock);
+	dout("msgpool_resv %p delta %d\n", pool, delta);
+	pool->min += delta;
+	ret = __fill_msgpool(pool);
+	spin_unlock(&pool->lock);
+	return ret;
+}
+
+struct ceph_msg *ceph_msgpool_get(struct ceph_msgpool *pool, int front_len)
+{
+	wait_queue_t wait;
+	struct ceph_msg *msg;
+
+	if (front_len && front_len > pool->front_len) {
+		pr_err("msgpool_get pool %p need front %d, pool size is %d\n",
+		       pool, front_len, pool->front_len);
+		WARN_ON(1);
+
+		/* try to alloc a fresh message */
+		msg = ceph_msg_new(0, front_len, 0, 0, NULL);
+		if (!IS_ERR(msg))
+			return msg;
+	}
+
+	if (!front_len)
+		front_len = pool->front_len;
+
+	if (pool->blocking) {
+		/* mempool_t behavior; first try to alloc */
+		msg = ceph_msg_new(0, front_len, 0, 0, NULL);
+		if (!IS_ERR(msg))
+			return msg;
+	}
+
+	while (1) {
+		spin_lock(&pool->lock);
+		if (likely(pool->num)) {
+			msg = list_entry(pool->msgs.next, struct ceph_msg,
+					 list_head);
+			list_del_init(&msg->list_head);
+			pool->num--;
+			dout("msgpool_get %p got %p, now %d/%d\n", pool, msg,
+			     pool->num, pool->min);
+			spin_unlock(&pool->lock);
+			return msg;
+		}
+		pr_err("msgpool_get %p now %d/%d, %s\n", pool, pool->num,
+		       pool->min, pool->blocking ? "waiting" : "may fail");
+		spin_unlock(&pool->lock);
+
+		if (!pool->blocking) {
+			WARN_ON(1);
+
+			/* maybe we can allocate it now? */
+			msg = ceph_msg_new(0, front_len, 0, 0, NULL);
+			if (!IS_ERR(msg))
+				return msg;
+
+			pr_err("msgpool_get %p empty + alloc failed\n", pool);
+			return ERR_PTR(-ENOMEM);
+		}
+
+		init_wait(&wait);
+		prepare_to_wait(&pool->wait, &wait, TASK_UNINTERRUPTIBLE);
+		schedule();
+		finish_wait(&pool->wait, &wait);
+	}
+}
+
+void ceph_msgpool_put(struct ceph_msgpool *pool, struct ceph_msg *msg)
+{
+	spin_lock(&pool->lock);
+	if (pool->num < pool->min) {
+		/* reset msg front_len; user may have changed it */
+		msg->front.iov_len = pool->front_len;
+		msg->hdr.front_len = cpu_to_le32(pool->front_len);
+
+		kref_set(&msg->kref, 1);  /* retake a single ref */
+		list_add(&msg->list_head, &pool->msgs);
+		pool->num++;
+		dout("msgpool_put %p reclaim %p, now %d/%d\n", pool, msg,
+		     pool->num, pool->min);
+		spin_unlock(&pool->lock);
+		wake_up(&pool->wait);
+	} else {
+		dout("msgpool_put %p drop %p, at %d/%d\n", pool, msg,
+		     pool->num, pool->min);
+		spin_unlock(&pool->lock);
+		ceph_msg_kfree(msg);
+	}
+}
diff --git a/fs/ceph/msgpool.h b/fs/ceph/msgpool.h
new file mode 100644
index 000000000000..bc834bfcd720
--- /dev/null
+++ b/fs/ceph/msgpool.h
@@ -0,0 +1,27 @@
+#ifndef _FS_CEPH_MSGPOOL
+#define _FS_CEPH_MSGPOOL
+
+#include "messenger.h"
+
+/*
+ * we use memory pools for preallocating messages we may receive, to
+ * avoid unexpected OOM conditions.
+ */
+struct ceph_msgpool {
+	spinlock_t lock;
+	int front_len;          /* preallocated payload size */
+	struct list_head msgs;  /* msgs in the pool; each has 1 ref */
+	int num, min;           /* cur, min # msgs in the pool */
+	bool blocking;
+	wait_queue_head_t wait;
+};
+
+extern int ceph_msgpool_init(struct ceph_msgpool *pool,
+			     int front_len, int size, bool blocking);
+extern void ceph_msgpool_destroy(struct ceph_msgpool *pool);
+extern int ceph_msgpool_resv(struct ceph_msgpool *, int delta);
+extern struct ceph_msg *ceph_msgpool_get(struct ceph_msgpool *,
+					 int front_len);
+extern void ceph_msgpool_put(struct ceph_msgpool *, struct ceph_msg *);
+
+#endif
diff --git a/fs/ceph/msgr.h b/fs/ceph/msgr.h
new file mode 100644
index 000000000000..8aaab414f3f8
--- /dev/null
+++ b/fs/ceph/msgr.h
@@ -0,0 +1,158 @@
+#ifndef __MSGR_H
+#define __MSGR_H
+
+/*
+ * Data types for message passing layer used by Ceph.
+ */
+
+#define CEPH_MON_PORT    6789  /* default monitor port */
+
+/*
+ * client-side processes will try to bind to ports in this
+ * range, simply for the benefit of tools like nmap or wireshark
+ * that would like to identify the protocol.
+ */
+#define CEPH_PORT_FIRST  6789
+#define CEPH_PORT_START  6800  /* non-monitors start here */
+#define CEPH_PORT_LAST   6900
+
+/*
+ * tcp connection banner.  include a protocol version. and adjust
+ * whenever the wire protocol changes.  try to keep this string length
+ * constant.
+ */
+#define CEPH_BANNER "ceph v027"
+#define CEPH_BANNER_MAX_LEN 30
+
+
+/*
+ * Rollover-safe type and comparator for 32-bit sequence numbers.
+ * Comparator returns -1, 0, or 1.
+ */
+typedef __u32 ceph_seq_t;
+
+static inline __s32 ceph_seq_cmp(__u32 a, __u32 b)
+{
+       return (__s32)a - (__s32)b;
+}
+
+
+/*
+ * entity_name -- logical name for a process participating in the
+ * network, e.g. 'mds0' or 'osd3'.
+ */
+struct ceph_entity_name {
+	__u8 type;      /* CEPH_ENTITY_TYPE_* */
+	__le64 num;
+} __attribute__ ((packed));
+
+#define CEPH_ENTITY_TYPE_MON    0x01
+#define CEPH_ENTITY_TYPE_MDS    0x02
+#define CEPH_ENTITY_TYPE_OSD    0x04
+#define CEPH_ENTITY_TYPE_CLIENT 0x08
+#define CEPH_ENTITY_TYPE_ADMIN  0x10
+#define CEPH_ENTITY_TYPE_AUTH   0x20
+
+#define CEPH_ENTITY_TYPE_ANY    0xFF
+
+extern const char *ceph_entity_type_name(int type);
+
+/*
+ * entity_addr -- network address
+ */
+struct ceph_entity_addr {
+	__le32 type;
+	__le32 nonce;  /* unique id for process (e.g. pid) */
+	struct sockaddr_storage in_addr;
+} __attribute__ ((packed));
+
+struct ceph_entity_inst {
+	struct ceph_entity_name name;
+	struct ceph_entity_addr addr;
+} __attribute__ ((packed));
+
+
+/* used by message exchange protocol */
+#define CEPH_MSGR_TAG_READY         1  /* server->client: ready for messages */
+#define CEPH_MSGR_TAG_RESETSESSION  2  /* server->client: reset, try again */
+#define CEPH_MSGR_TAG_WAIT          3  /* server->client: wait for racing
+					  incoming connection */
+#define CEPH_MSGR_TAG_RETRY_SESSION 4  /* server->client + cseq: try again
+					  with higher cseq */
+#define CEPH_MSGR_TAG_RETRY_GLOBAL  5  /* server->client + gseq: try again
+					  with higher gseq */
+#define CEPH_MSGR_TAG_CLOSE         6  /* closing pipe */
+#define CEPH_MSGR_TAG_MSG           7  /* message */
+#define CEPH_MSGR_TAG_ACK           8  /* message ack */
+#define CEPH_MSGR_TAG_KEEPALIVE     9  /* just a keepalive byte! */
+#define CEPH_MSGR_TAG_BADPROTOVER  10  /* bad protocol version */
+#define CEPH_MSGR_TAG_BADAUTHORIZER 11 /* bad authorizer */
+#define CEPH_MSGR_TAG_FEATURES      12 /* insufficient features */
+
+
+/*
+ * connection negotiation
+ */
+struct ceph_msg_connect {
+	__le64 features;     /* supported feature bits */
+	__le32 host_type;    /* CEPH_ENTITY_TYPE_* */
+	__le32 global_seq;   /* count connections initiated by this host */
+	__le32 connect_seq;  /* count connections initiated in this session */
+	__le32 protocol_version;
+	__le32 authorizer_protocol;
+	__le32 authorizer_len;
+	__u8  flags;         /* CEPH_MSG_CONNECT_* */
+} __attribute__ ((packed));
+
+struct ceph_msg_connect_reply {
+	__u8 tag;
+	__le64 features;     /* feature bits for this session */
+	__le32 global_seq;
+	__le32 connect_seq;
+	__le32 protocol_version;
+	__le32 authorizer_len;
+	__u8 flags;
+} __attribute__ ((packed));
+
+#define CEPH_MSG_CONNECT_LOSSY  1  /* messages i send may be safely dropped */
+
+
+/*
+ * message header
+ */
+struct ceph_msg_header {
+	__le64 seq;       /* message seq# for this session */
+	__le64 tid;       /* transaction id */
+	__le16 type;      /* message type */
+	__le16 priority;  /* priority.  higher value == higher priority */
+	__le16 version;   /* version of message encoding */
+
+	__le32 front_len; /* bytes in main payload */
+	__le32 middle_len;/* bytes in middle payload */
+	__le32 data_len;  /* bytes of data payload */
+	__le16 data_off;  /* sender: include full offset;
+			     receiver: mask against ~PAGE_MASK */
+
+	struct ceph_entity_inst src, orig_src;
+	__le32 reserved;
+	__le32 crc;       /* header crc32c */
+} __attribute__ ((packed));
+
+#define CEPH_MSG_PRIO_LOW     64
+#define CEPH_MSG_PRIO_DEFAULT 127
+#define CEPH_MSG_PRIO_HIGH    196
+#define CEPH_MSG_PRIO_HIGHEST 255
+
+/*
+ * follows data payload
+ */
+struct ceph_msg_footer {
+	__le32 front_crc, middle_crc, data_crc;
+	__u8 flags;
+} __attribute__ ((packed));
+
+#define CEPH_MSG_FOOTER_COMPLETE  (1<<0)   /* msg wasn't aborted */
+#define CEPH_MSG_FOOTER_NOCRC     (1<<1)   /* no data crc */
+
+
+#endif
diff --git a/fs/ceph/osd_client.c b/fs/ceph/osd_client.c
new file mode 100644
index 000000000000..dbe63db9762f
--- /dev/null
+++ b/fs/ceph/osd_client.c
@@ -0,0 +1,1537 @@
+#include "ceph_debug.h"
+
+#include <linux/err.h>
+#include <linux/highmem.h>
+#include <linux/mm.h>
+#include <linux/pagemap.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+
+#include "super.h"
+#include "osd_client.h"
+#include "messenger.h"
+#include "decode.h"
+#include "auth.h"
+
+#define OSD_OP_FRONT_LEN	4096
+#define OSD_OPREPLY_FRONT_LEN	512
+
+const static struct ceph_connection_operations osd_con_ops;
+static int __kick_requests(struct ceph_osd_client *osdc,
+			  struct ceph_osd *kickosd);
+
+static void kick_requests(struct ceph_osd_client *osdc, struct ceph_osd *osd);
+
+/*
+ * Implement client access to distributed object storage cluster.
+ *
+ * All data objects are stored within a cluster/cloud of OSDs, or
+ * "object storage devices."  (Note that Ceph OSDs have _nothing_ to
+ * do with the T10 OSD extensions to SCSI.)  Ceph OSDs are simply
+ * remote daemons serving up and coordinating consistent and safe
+ * access to storage.
+ *
+ * Cluster membership and the mapping of data objects onto storage devices
+ * are described by the osd map.
+ *
+ * We keep track of pending OSD requests (read, write), resubmit
+ * requests to different OSDs when the cluster topology/data layout
+ * change, or retry the affected requests when the communications
+ * channel with an OSD is reset.
+ */
+
+/*
+ * calculate the mapping of a file extent onto an object, and fill out the
+ * request accordingly.  shorten extent as necessary if it crosses an
+ * object boundary.
+ *
+ * fill osd op in request message.
+ */
+static void calc_layout(struct ceph_osd_client *osdc,
+			struct ceph_vino vino, struct ceph_file_layout *layout,
+			u64 off, u64 *plen,
+			struct ceph_osd_request *req)
+{
+	struct ceph_osd_request_head *reqhead = req->r_request->front.iov_base;
+	struct ceph_osd_op *op = (void *)(reqhead + 1);
+	u64 orig_len = *plen;
+	u64 objoff, objlen;    /* extent in object */
+	u64 bno;
+
+	reqhead->snapid = cpu_to_le64(vino.snap);
+
+	/* object extent? */
+	ceph_calc_file_object_mapping(layout, off, plen, &bno,
+				      &objoff, &objlen);
+	if (*plen < orig_len)
+		dout(" skipping last %llu, final file extent %llu~%llu\n",
+		     orig_len - *plen, off, *plen);
+
+	sprintf(req->r_oid, "%llx.%08llx", vino.ino, bno);
+	req->r_oid_len = strlen(req->r_oid);
+
+	op->extent.offset = cpu_to_le64(objoff);
+	op->extent.length = cpu_to_le64(objlen);
+	req->r_num_pages = calc_pages_for(off, *plen);
+
+	dout("calc_layout %s (%d) %llu~%llu (%d pages)\n",
+	     req->r_oid, req->r_oid_len, objoff, objlen, req->r_num_pages);
+}
+
+/*
+ * requests
+ */
+void ceph_osdc_release_request(struct kref *kref)
+{
+	struct ceph_osd_request *req = container_of(kref,
+						    struct ceph_osd_request,
+						    r_kref);
+
+	if (req->r_request)
+		ceph_msg_put(req->r_request);
+	if (req->r_reply)
+		ceph_msg_put(req->r_reply);
+	if (req->r_con_filling_msg) {
+		dout("release_request revoking pages %p from con %p\n",
+		     req->r_pages, req->r_con_filling_msg);
+		ceph_con_revoke_message(req->r_con_filling_msg,
+				      req->r_reply);
+		ceph_con_put(req->r_con_filling_msg);
+	}
+	if (req->r_own_pages)
+		ceph_release_page_vector(req->r_pages,
+					 req->r_num_pages);
+	ceph_put_snap_context(req->r_snapc);
+	if (req->r_mempool)
+		mempool_free(req, req->r_osdc->req_mempool);
+	else
+		kfree(req);
+}
+
+/*
+ * build new request AND message, calculate layout, and adjust file
+ * extent as needed.
+ *
+ * if the file was recently truncated, we include information about its
+ * old and new size so that the object can be updated appropriately.  (we
+ * avoid synchronously deleting truncated objects because it's slow.)
+ *
+ * if @do_sync, include a 'startsync' command so that the osd will flush
+ * data quickly.
+ */
+struct ceph_osd_request *ceph_osdc_new_request(struct ceph_osd_client *osdc,
+					       struct ceph_file_layout *layout,
+					       struct ceph_vino vino,
+					       u64 off, u64 *plen,
+					       int opcode, int flags,
+					       struct ceph_snap_context *snapc,
+					       int do_sync,
+					       u32 truncate_seq,
+					       u64 truncate_size,
+					       struct timespec *mtime,
+					       bool use_mempool, int num_reply)
+{
+	struct ceph_osd_request *req;
+	struct ceph_msg *msg;
+	struct ceph_osd_request_head *head;
+	struct ceph_osd_op *op;
+	void *p;
+	int num_op = 1 + do_sync;
+	size_t msg_size = sizeof(*head) + num_op*sizeof(*op);
+	int i;
+
+	if (use_mempool) {
+		req = mempool_alloc(osdc->req_mempool, GFP_NOFS);
+		memset(req, 0, sizeof(*req));
+	} else {
+		req = kzalloc(sizeof(*req), GFP_NOFS);
+	}
+	if (req == NULL)
+		return ERR_PTR(-ENOMEM);
+
+	req->r_osdc = osdc;
+	req->r_mempool = use_mempool;
+	kref_init(&req->r_kref);
+	init_completion(&req->r_completion);
+	init_completion(&req->r_safe_completion);
+	INIT_LIST_HEAD(&req->r_unsafe_item);
+	req->r_flags = flags;
+
+	WARN_ON((flags & (CEPH_OSD_FLAG_READ|CEPH_OSD_FLAG_WRITE)) == 0);
+
+	/* create reply message */
+	if (use_mempool)
+		msg = ceph_msgpool_get(&osdc->msgpool_op_reply, 0);
+	else
+		msg = ceph_msg_new(CEPH_MSG_OSD_OPREPLY,
+				   OSD_OPREPLY_FRONT_LEN, 0, 0, NULL);
+	if (IS_ERR(msg)) {
+		ceph_osdc_put_request(req);
+		return ERR_PTR(PTR_ERR(msg));
+	}
+	req->r_reply = msg;
+
+	/* create request message; allow space for oid */
+	msg_size += 40;
+	if (snapc)
+		msg_size += sizeof(u64) * snapc->num_snaps;
+	if (use_mempool)
+		msg = ceph_msgpool_get(&osdc->msgpool_op, 0);
+	else
+		msg = ceph_msg_new(CEPH_MSG_OSD_OP, msg_size, 0, 0, NULL);
+	if (IS_ERR(msg)) {
+		ceph_osdc_put_request(req);
+		return ERR_PTR(PTR_ERR(msg));
+	}
+	msg->hdr.type = cpu_to_le16(CEPH_MSG_OSD_OP);
+	memset(msg->front.iov_base, 0, msg->front.iov_len);
+	head = msg->front.iov_base;
+	op = (void *)(head + 1);
+	p = (void *)(op + num_op);
+
+	req->r_request = msg;
+	req->r_snapc = ceph_get_snap_context(snapc);
+
+	head->client_inc = cpu_to_le32(1); /* always, for now. */
+	head->flags = cpu_to_le32(flags);
+	if (flags & CEPH_OSD_FLAG_WRITE)
+		ceph_encode_timespec(&head->mtime, mtime);
+	head->num_ops = cpu_to_le16(num_op);
+	op->op = cpu_to_le16(opcode);
+
+	/* calculate max write size */
+	calc_layout(osdc, vino, layout, off, plen, req);
+	req->r_file_layout = *layout;  /* keep a copy */
+
+	if (flags & CEPH_OSD_FLAG_WRITE) {
+		req->r_request->hdr.data_off = cpu_to_le16(off);
+		req->r_request->hdr.data_len = cpu_to_le32(*plen);
+		op->payload_len = cpu_to_le32(*plen);
+	}
+	op->extent.truncate_size = cpu_to_le64(truncate_size);
+	op->extent.truncate_seq = cpu_to_le32(truncate_seq);
+
+	/* fill in oid */
+	head->object_len = cpu_to_le32(req->r_oid_len);
+	memcpy(p, req->r_oid, req->r_oid_len);
+	p += req->r_oid_len;
+
+	if (do_sync) {
+		op++;
+		op->op = cpu_to_le16(CEPH_OSD_OP_STARTSYNC);
+	}
+	if (snapc) {
+		head->snap_seq = cpu_to_le64(snapc->seq);
+		head->num_snaps = cpu_to_le32(snapc->num_snaps);
+		for (i = 0; i < snapc->num_snaps; i++) {
+			put_unaligned_le64(snapc->snaps[i], p);
+			p += sizeof(u64);
+		}
+	}
+
+	BUG_ON(p > msg->front.iov_base + msg->front.iov_len);
+	msg_size = p - msg->front.iov_base;
+	msg->front.iov_len = msg_size;
+	msg->hdr.front_len = cpu_to_le32(msg_size);
+	return req;
+}
+
+/*
+ * We keep osd requests in an rbtree, sorted by ->r_tid.
+ */
+static void __insert_request(struct ceph_osd_client *osdc,
+			     struct ceph_osd_request *new)
+{
+	struct rb_node **p = &osdc->requests.rb_node;
+	struct rb_node *parent = NULL;
+	struct ceph_osd_request *req = NULL;
+
+	while (*p) {
+		parent = *p;
+		req = rb_entry(parent, struct ceph_osd_request, r_node);
+		if (new->r_tid < req->r_tid)
+			p = &(*p)->rb_left;
+		else if (new->r_tid > req->r_tid)
+			p = &(*p)->rb_right;
+		else
+			BUG();
+	}
+
+	rb_link_node(&new->r_node, parent, p);
+	rb_insert_color(&new->r_node, &osdc->requests);
+}
+
+static struct ceph_osd_request *__lookup_request(struct ceph_osd_client *osdc,
+						 u64 tid)
+{
+	struct ceph_osd_request *req;
+	struct rb_node *n = osdc->requests.rb_node;
+
+	while (n) {
+		req = rb_entry(n, struct ceph_osd_request, r_node);
+		if (tid < req->r_tid)
+			n = n->rb_left;
+		else if (tid > req->r_tid)
+			n = n->rb_right;
+		else
+			return req;
+	}
+	return NULL;
+}
+
+static struct ceph_osd_request *
+__lookup_request_ge(struct ceph_osd_client *osdc,
+		    u64 tid)
+{
+	struct ceph_osd_request *req;
+	struct rb_node *n = osdc->requests.rb_node;
+
+	while (n) {
+		req = rb_entry(n, struct ceph_osd_request, r_node);
+		if (tid < req->r_tid) {
+			if (!n->rb_left)
+				return req;
+			n = n->rb_left;
+		} else if (tid > req->r_tid) {
+			n = n->rb_right;
+		} else {
+			return req;
+		}
+	}
+	return NULL;
+}
+
+
+/*
+ * If the osd connection drops, we need to resubmit all requests.
+ */
+static void osd_reset(struct ceph_connection *con)
+{
+	struct ceph_osd *osd = con->private;
+	struct ceph_osd_client *osdc;
+
+	if (!osd)
+		return;
+	dout("osd_reset osd%d\n", osd->o_osd);
+	osdc = osd->o_osdc;
+	down_read(&osdc->map_sem);
+	kick_requests(osdc, osd);
+	up_read(&osdc->map_sem);
+}
+
+/*
+ * Track open sessions with osds.
+ */
+static struct ceph_osd *create_osd(struct ceph_osd_client *osdc)
+{
+	struct ceph_osd *osd;
+
+	osd = kzalloc(sizeof(*osd), GFP_NOFS);
+	if (!osd)
+		return NULL;
+
+	atomic_set(&osd->o_ref, 1);
+	osd->o_osdc = osdc;
+	INIT_LIST_HEAD(&osd->o_requests);
+	INIT_LIST_HEAD(&osd->o_osd_lru);
+	osd->o_incarnation = 1;
+
+	ceph_con_init(osdc->client->msgr, &osd->o_con);
+	osd->o_con.private = osd;
+	osd->o_con.ops = &osd_con_ops;
+	osd->o_con.peer_name.type = CEPH_ENTITY_TYPE_OSD;
+
+	INIT_LIST_HEAD(&osd->o_keepalive_item);
+	return osd;
+}
+
+static struct ceph_osd *get_osd(struct ceph_osd *osd)
+{
+	if (atomic_inc_not_zero(&osd->o_ref)) {
+		dout("get_osd %p %d -> %d\n", osd, atomic_read(&osd->o_ref)-1,
+		     atomic_read(&osd->o_ref));
+		return osd;
+	} else {
+		dout("get_osd %p FAIL\n", osd);
+		return NULL;
+	}
+}
+
+static void put_osd(struct ceph_osd *osd)
+{
+	dout("put_osd %p %d -> %d\n", osd, atomic_read(&osd->o_ref),
+	     atomic_read(&osd->o_ref) - 1);
+	if (atomic_dec_and_test(&osd->o_ref))
+		kfree(osd);
+}
+
+/*
+ * remove an osd from our map
+ */
+static void __remove_osd(struct ceph_osd_client *osdc, struct ceph_osd *osd)
+{
+	dout("__remove_osd %p\n", osd);
+	BUG_ON(!list_empty(&osd->o_requests));
+	rb_erase(&osd->o_node, &osdc->osds);
+	list_del_init(&osd->o_osd_lru);
+	ceph_con_close(&osd->o_con);
+	put_osd(osd);
+}
+
+static void __move_osd_to_lru(struct ceph_osd_client *osdc,
+			      struct ceph_osd *osd)
+{
+	dout("__move_osd_to_lru %p\n", osd);
+	BUG_ON(!list_empty(&osd->o_osd_lru));
+	list_add_tail(&osd->o_osd_lru, &osdc->osd_lru);
+	osd->lru_ttl = jiffies + osdc->client->mount_args->osd_idle_ttl * HZ;
+}
+
+static void __remove_osd_from_lru(struct ceph_osd *osd)
+{
+	dout("__remove_osd_from_lru %p\n", osd);
+	if (!list_empty(&osd->o_osd_lru))
+		list_del_init(&osd->o_osd_lru);
+}
+
+static void remove_old_osds(struct ceph_osd_client *osdc, int remove_all)
+{
+	struct ceph_osd *osd, *nosd;
+
+	dout("__remove_old_osds %p\n", osdc);
+	mutex_lock(&osdc->request_mutex);
+	list_for_each_entry_safe(osd, nosd, &osdc->osd_lru, o_osd_lru) {
+		if (!remove_all && time_before(jiffies, osd->lru_ttl))
+			break;
+		__remove_osd(osdc, osd);
+	}
+	mutex_unlock(&osdc->request_mutex);
+}
+
+/*
+ * reset osd connect
+ */
+static int __reset_osd(struct ceph_osd_client *osdc, struct ceph_osd *osd)
+{
+	int ret = 0;
+
+	dout("__reset_osd %p osd%d\n", osd, osd->o_osd);
+	if (list_empty(&osd->o_requests)) {
+		__remove_osd(osdc, osd);
+	} else {
+		ceph_con_close(&osd->o_con);
+		ceph_con_open(&osd->o_con, &osdc->osdmap->osd_addr[osd->o_osd]);
+		osd->o_incarnation++;
+	}
+	return ret;
+}
+
+static void __insert_osd(struct ceph_osd_client *osdc, struct ceph_osd *new)
+{
+	struct rb_node **p = &osdc->osds.rb_node;
+	struct rb_node *parent = NULL;
+	struct ceph_osd *osd = NULL;
+
+	while (*p) {
+		parent = *p;
+		osd = rb_entry(parent, struct ceph_osd, o_node);
+		if (new->o_osd < osd->o_osd)
+			p = &(*p)->rb_left;
+		else if (new->o_osd > osd->o_osd)
+			p = &(*p)->rb_right;
+		else
+			BUG();
+	}
+
+	rb_link_node(&new->o_node, parent, p);
+	rb_insert_color(&new->o_node, &osdc->osds);
+}
+
+static struct ceph_osd *__lookup_osd(struct ceph_osd_client *osdc, int o)
+{
+	struct ceph_osd *osd;
+	struct rb_node *n = osdc->osds.rb_node;
+
+	while (n) {
+		osd = rb_entry(n, struct ceph_osd, o_node);
+		if (o < osd->o_osd)
+			n = n->rb_left;
+		else if (o > osd->o_osd)
+			n = n->rb_right;
+		else
+			return osd;
+	}
+	return NULL;
+}
+
+static void __schedule_osd_timeout(struct ceph_osd_client *osdc)
+{
+	schedule_delayed_work(&osdc->timeout_work,
+			osdc->client->mount_args->osd_keepalive_timeout * HZ);
+}
+
+static void __cancel_osd_timeout(struct ceph_osd_client *osdc)
+{
+	cancel_delayed_work(&osdc->timeout_work);
+}
+
+/*
+ * Register request, assign tid.  If this is the first request, set up
+ * the timeout event.
+ */
+static void register_request(struct ceph_osd_client *osdc,
+			     struct ceph_osd_request *req)
+{
+	mutex_lock(&osdc->request_mutex);
+	req->r_tid = ++osdc->last_tid;
+	req->r_request->hdr.tid = cpu_to_le64(req->r_tid);
+	INIT_LIST_HEAD(&req->r_req_lru_item);
+
+	dout("register_request %p tid %lld\n", req, req->r_tid);
+	__insert_request(osdc, req);
+	ceph_osdc_get_request(req);
+	osdc->num_requests++;
+
+	if (osdc->num_requests == 1) {
+		dout(" first request, scheduling timeout\n");
+		__schedule_osd_timeout(osdc);
+	}
+	mutex_unlock(&osdc->request_mutex);
+}
+
+/*
+ * called under osdc->request_mutex
+ */
+static void __unregister_request(struct ceph_osd_client *osdc,
+				 struct ceph_osd_request *req)
+{
+	dout("__unregister_request %p tid %lld\n", req, req->r_tid);
+	rb_erase(&req->r_node, &osdc->requests);
+	osdc->num_requests--;
+
+	if (req->r_osd) {
+		/* make sure the original request isn't in flight. */
+		ceph_con_revoke(&req->r_osd->o_con, req->r_request);
+
+		list_del_init(&req->r_osd_item);
+		if (list_empty(&req->r_osd->o_requests))
+			__move_osd_to_lru(osdc, req->r_osd);
+		req->r_osd = NULL;
+	}
+
+	ceph_osdc_put_request(req);
+
+	list_del_init(&req->r_req_lru_item);
+	if (osdc->num_requests == 0) {
+		dout(" no requests, canceling timeout\n");
+		__cancel_osd_timeout(osdc);
+	}
+}
+
+/*
+ * Cancel a previously queued request message
+ */
+static void __cancel_request(struct ceph_osd_request *req)
+{
+	if (req->r_sent) {
+		ceph_con_revoke(&req->r_osd->o_con, req->r_request);
+		req->r_sent = 0;
+	}
+	list_del_init(&req->r_req_lru_item);
+}
+
+/*
+ * Pick an osd (the first 'up' osd in the pg), allocate the osd struct
+ * (as needed), and set the request r_osd appropriately.  If there is
+ * no up osd, set r_osd to NULL.
+ *
+ * Return 0 if unchanged, 1 if changed, or negative on error.
+ *
+ * Caller should hold map_sem for read and request_mutex.
+ */
+static int __map_osds(struct ceph_osd_client *osdc,
+		      struct ceph_osd_request *req)
+{
+	struct ceph_osd_request_head *reqhead = req->r_request->front.iov_base;
+	struct ceph_pg pgid;
+	int o = -1;
+	int err;
+
+	dout("map_osds %p tid %lld\n", req, req->r_tid);
+	err = ceph_calc_object_layout(&reqhead->layout, req->r_oid,
+				      &req->r_file_layout, osdc->osdmap);
+	if (err)
+		return err;
+	pgid = reqhead->layout.ol_pgid;
+	req->r_pgid = pgid;
+
+	o = ceph_calc_pg_primary(osdc->osdmap, pgid);
+
+	if ((req->r_osd && req->r_osd->o_osd == o &&
+	     req->r_sent >= req->r_osd->o_incarnation) ||
+	    (req->r_osd == NULL && o == -1))
+		return 0;  /* no change */
+
+	dout("map_osds tid %llu pgid %d.%x osd%d (was osd%d)\n",
+	     req->r_tid, le32_to_cpu(pgid.pool), le16_to_cpu(pgid.ps), o,
+	     req->r_osd ? req->r_osd->o_osd : -1);
+
+	if (req->r_osd) {
+		__cancel_request(req);
+		list_del_init(&req->r_osd_item);
+		req->r_osd = NULL;
+	}
+
+	req->r_osd = __lookup_osd(osdc, o);
+	if (!req->r_osd && o >= 0) {
+		err = -ENOMEM;
+		req->r_osd = create_osd(osdc);
+		if (!req->r_osd)
+			goto out;
+
+		dout("map_osds osd %p is osd%d\n", req->r_osd, o);
+		req->r_osd->o_osd = o;
+		req->r_osd->o_con.peer_name.num = cpu_to_le64(o);
+		__insert_osd(osdc, req->r_osd);
+
+		ceph_con_open(&req->r_osd->o_con, &osdc->osdmap->osd_addr[o]);
+	}
+
+	if (req->r_osd) {
+		__remove_osd_from_lru(req->r_osd);
+		list_add(&req->r_osd_item, &req->r_osd->o_requests);
+	}
+	err = 1;   /* osd changed */
+
+out:
+	return err;
+}
+
+/*
+ * caller should hold map_sem (for read) and request_mutex
+ */
+static int __send_request(struct ceph_osd_client *osdc,
+			  struct ceph_osd_request *req)
+{
+	struct ceph_osd_request_head *reqhead;
+	int err;
+
+	err = __map_osds(osdc, req);
+	if (err < 0)
+		return err;
+	if (req->r_osd == NULL) {
+		dout("send_request %p no up osds in pg\n", req);
+		ceph_monc_request_next_osdmap(&osdc->client->monc);
+		return 0;
+	}
+
+	dout("send_request %p tid %llu to osd%d flags %d\n",
+	     req, req->r_tid, req->r_osd->o_osd, req->r_flags);
+
+	reqhead = req->r_request->front.iov_base;
+	reqhead->osdmap_epoch = cpu_to_le32(osdc->osdmap->epoch);
+	reqhead->flags |= cpu_to_le32(req->r_flags);  /* e.g., RETRY */
+	reqhead->reassert_version = req->r_reassert_version;
+
+	req->r_sent_stamp = jiffies;
+	list_move_tail(&osdc->req_lru, &req->r_req_lru_item);
+
+	ceph_msg_get(req->r_request); /* send consumes a ref */
+	ceph_con_send(&req->r_osd->o_con, req->r_request);
+	req->r_sent = req->r_osd->o_incarnation;
+	return 0;
+}
+
+/*
+ * Timeout callback, called every N seconds when 1 or more osd
+ * requests has been active for more than N seconds.  When this
+ * happens, we ping all OSDs with requests who have timed out to
+ * ensure any communications channel reset is detected.  Reset the
+ * request timeouts another N seconds in the future as we go.
+ * Reschedule the timeout event another N seconds in future (unless
+ * there are no open requests).
+ */
+static void handle_timeout(struct work_struct *work)
+{
+	struct ceph_osd_client *osdc =
+		container_of(work, struct ceph_osd_client, timeout_work.work);
+	struct ceph_osd_request *req, *last_req = NULL;
+	struct ceph_osd *osd;
+	unsigned long timeout = osdc->client->mount_args->osd_timeout * HZ;
+	unsigned long keepalive =
+		osdc->client->mount_args->osd_keepalive_timeout * HZ;
+	unsigned long last_sent = 0;
+	struct rb_node *p;
+	struct list_head slow_osds;
+
+	dout("timeout\n");
+	down_read(&osdc->map_sem);
+
+	ceph_monc_request_next_osdmap(&osdc->client->monc);
+
+	mutex_lock(&osdc->request_mutex);
+	for (p = rb_first(&osdc->requests); p; p = rb_next(p)) {
+		req = rb_entry(p, struct ceph_osd_request, r_node);
+
+		if (req->r_resend) {
+			int err;
+
+			dout("osdc resending prev failed %lld\n", req->r_tid);
+			err = __send_request(osdc, req);
+			if (err)
+				dout("osdc failed again on %lld\n", req->r_tid);
+			else
+				req->r_resend = false;
+			continue;
+		}
+	}
+
+	/*
+	 * reset osds that appear to be _really_ unresponsive.  this
+	 * is a failsafe measure.. we really shouldn't be getting to
+	 * this point if the system is working properly.  the monitors
+	 * should mark the osd as failed and we should find out about
+	 * it from an updated osd map.
+	 */
+	while (!list_empty(&osdc->req_lru)) {
+		req = list_entry(osdc->req_lru.next, struct ceph_osd_request,
+				 r_req_lru_item);
+
+		if (time_before(jiffies, req->r_sent_stamp + timeout))
+			break;
+
+		BUG_ON(req == last_req && req->r_sent_stamp == last_sent);
+		last_req = req;
+		last_sent = req->r_sent_stamp;
+
+		osd = req->r_osd;
+		BUG_ON(!osd);
+		pr_warning(" tid %llu timed out on osd%d, will reset osd\n",
+			   req->r_tid, osd->o_osd);
+		__kick_requests(osdc, osd);
+	}
+
+	/*
+	 * ping osds that are a bit slow.  this ensures that if there
+	 * is a break in the TCP connection we will notice, and reopen
+	 * a connection with that osd (from the fault callback).
+	 */
+	INIT_LIST_HEAD(&slow_osds);
+	list_for_each_entry(req, &osdc->req_lru, r_req_lru_item) {
+		if (time_before(jiffies, req->r_sent_stamp + keepalive))
+			break;
+
+		osd = req->r_osd;
+		BUG_ON(!osd);
+		dout(" tid %llu is slow, will send keepalive on osd%d\n",
+		     req->r_tid, osd->o_osd);
+		list_move_tail(&osd->o_keepalive_item, &slow_osds);
+	}
+	while (!list_empty(&slow_osds)) {
+		osd = list_entry(slow_osds.next, struct ceph_osd,
+				 o_keepalive_item);
+		list_del_init(&osd->o_keepalive_item);
+		ceph_con_keepalive(&osd->o_con);
+	}
+
+	__schedule_osd_timeout(osdc);
+	mutex_unlock(&osdc->request_mutex);
+
+	up_read(&osdc->map_sem);
+}
+
+static void handle_osds_timeout(struct work_struct *work)
+{
+	struct ceph_osd_client *osdc =
+		container_of(work, struct ceph_osd_client,
+			     osds_timeout_work.work);
+	unsigned long delay =
+		osdc->client->mount_args->osd_idle_ttl * HZ >> 2;
+
+	dout("osds timeout\n");
+	down_read(&osdc->map_sem);
+	remove_old_osds(osdc, 0);
+	up_read(&osdc->map_sem);
+
+	schedule_delayed_work(&osdc->osds_timeout_work,
+			      round_jiffies_relative(delay));
+}
+
+/*
+ * handle osd op reply.  either call the callback if it is specified,
+ * or do the completion to wake up the waiting thread.
+ */
+static void handle_reply(struct ceph_osd_client *osdc, struct ceph_msg *msg,
+			 struct ceph_connection *con)
+{
+	struct ceph_osd_reply_head *rhead = msg->front.iov_base;
+	struct ceph_osd_request *req;
+	u64 tid;
+	int numops, object_len, flags;
+
+	tid = le64_to_cpu(msg->hdr.tid);
+	if (msg->front.iov_len < sizeof(*rhead))
+		goto bad;
+	numops = le32_to_cpu(rhead->num_ops);
+	object_len = le32_to_cpu(rhead->object_len);
+	if (msg->front.iov_len != sizeof(*rhead) + object_len +
+	    numops * sizeof(struct ceph_osd_op))
+		goto bad;
+	dout("handle_reply %p tid %llu\n", msg, tid);
+
+	/* lookup */
+	mutex_lock(&osdc->request_mutex);
+	req = __lookup_request(osdc, tid);
+	if (req == NULL) {
+		dout("handle_reply tid %llu dne\n", tid);
+		mutex_unlock(&osdc->request_mutex);
+		return;
+	}
+	ceph_osdc_get_request(req);
+	flags = le32_to_cpu(rhead->flags);
+
+	/*
+	 * if this connection filled our message, drop our reference now, to
+	 * avoid a (safe but slower) revoke later.
+	 */
+	if (req->r_con_filling_msg == con && req->r_reply == msg) {
+		dout(" dropping con_filling_msg ref %p\n", con);
+		req->r_con_filling_msg = NULL;
+		ceph_con_put(con);
+	}
+
+	if (!req->r_got_reply) {
+		unsigned bytes;
+
+		req->r_result = le32_to_cpu(rhead->result);
+		bytes = le32_to_cpu(msg->hdr.data_len);
+		dout("handle_reply result %d bytes %d\n", req->r_result,
+		     bytes);
+		if (req->r_result == 0)
+			req->r_result = bytes;
+
+		/* in case this is a write and we need to replay, */
+		req->r_reassert_version = rhead->reassert_version;
+
+		req->r_got_reply = 1;
+	} else if ((flags & CEPH_OSD_FLAG_ONDISK) == 0) {
+		dout("handle_reply tid %llu dup ack\n", tid);
+		mutex_unlock(&osdc->request_mutex);
+		goto done;
+	}
+
+	dout("handle_reply tid %llu flags %d\n", tid, flags);
+
+	/* either this is a read, or we got the safe response */
+	if ((flags & CEPH_OSD_FLAG_ONDISK) ||
+	    ((flags & CEPH_OSD_FLAG_WRITE) == 0))
+		__unregister_request(osdc, req);
+
+	mutex_unlock(&osdc->request_mutex);
+
+	if (req->r_callback)
+		req->r_callback(req, msg);
+	else
+		complete(&req->r_completion);
+
+	if (flags & CEPH_OSD_FLAG_ONDISK) {
+		if (req->r_safe_callback)
+			req->r_safe_callback(req, msg);
+		complete(&req->r_safe_completion);  /* fsync waiter */
+	}
+
+done:
+	ceph_osdc_put_request(req);
+	return;
+
+bad:
+	pr_err("corrupt osd_op_reply got %d %d expected %d\n",
+	       (int)msg->front.iov_len, le32_to_cpu(msg->hdr.front_len),
+	       (int)sizeof(*rhead));
+	ceph_msg_dump(msg);
+}
+
+
+static int __kick_requests(struct ceph_osd_client *osdc,
+			  struct ceph_osd *kickosd)
+{
+	struct ceph_osd_request *req;
+	struct rb_node *p, *n;
+	int needmap = 0;
+	int err;
+
+	dout("kick_requests osd%d\n", kickosd ? kickosd->o_osd : -1);
+	if (kickosd) {
+		__reset_osd(osdc, kickosd);
+	} else {
+		for (p = rb_first(&osdc->osds); p; p = n) {
+			struct ceph_osd *osd =
+				rb_entry(p, struct ceph_osd, o_node);
+
+			n = rb_next(p);
+			if (!ceph_osd_is_up(osdc->osdmap, osd->o_osd) ||
+			    memcmp(&osd->o_con.peer_addr,
+				   ceph_osd_addr(osdc->osdmap,
+						 osd->o_osd),
+				   sizeof(struct ceph_entity_addr)) != 0)
+				__reset_osd(osdc, osd);
+		}
+	}
+
+	for (p = rb_first(&osdc->requests); p; p = rb_next(p)) {
+		req = rb_entry(p, struct ceph_osd_request, r_node);
+
+		if (req->r_resend) {
+			dout(" r_resend set on tid %llu\n", req->r_tid);
+			__cancel_request(req);
+			goto kick;
+		}
+		if (req->r_osd && kickosd == req->r_osd) {
+			__cancel_request(req);
+			goto kick;
+		}
+
+		err = __map_osds(osdc, req);
+		if (err == 0)
+			continue;  /* no change */
+		if (err < 0) {
+			/*
+			 * FIXME: really, we should set the request
+			 * error and fail if this isn't a 'nofail'
+			 * request, but that's a fair bit more
+			 * complicated to do.  So retry!
+			 */
+			dout(" setting r_resend on %llu\n", req->r_tid);
+			req->r_resend = true;
+			continue;
+		}
+		if (req->r_osd == NULL) {
+			dout("tid %llu maps to no valid osd\n", req->r_tid);
+			needmap++;  /* request a newer map */
+			continue;
+		}
+
+kick:
+		dout("kicking %p tid %llu osd%d\n", req, req->r_tid,
+		     req->r_osd->o_osd);
+		req->r_flags |= CEPH_OSD_FLAG_RETRY;
+		err = __send_request(osdc, req);
+		if (err) {
+			dout(" setting r_resend on %llu\n", req->r_tid);
+			req->r_resend = true;
+		}
+	}
+
+	return needmap;
+}
+
+/*
+ * Resubmit osd requests whose osd or osd address has changed.  Request
+ * a new osd map if osds are down, or we are otherwise unable to determine
+ * how to direct a request.
+ *
+ * Close connections to down osds.
+ *
+ * If @who is specified, resubmit requests for that specific osd.
+ *
+ * Caller should hold map_sem for read and request_mutex.
+ */
+static void kick_requests(struct ceph_osd_client *osdc,
+			  struct ceph_osd *kickosd)
+{
+	int needmap;
+
+	mutex_lock(&osdc->request_mutex);
+	needmap = __kick_requests(osdc, kickosd);
+	mutex_unlock(&osdc->request_mutex);
+
+	if (needmap) {
+		dout("%d requests for down osds, need new map\n", needmap);
+		ceph_monc_request_next_osdmap(&osdc->client->monc);
+	}
+
+}
+/*
+ * Process updated osd map.
+ *
+ * The message contains any number of incremental and full maps, normally
+ * indicating some sort of topology change in the cluster.  Kick requests
+ * off to different OSDs as needed.
+ */
+void ceph_osdc_handle_map(struct ceph_osd_client *osdc, struct ceph_msg *msg)
+{
+	void *p, *end, *next;
+	u32 nr_maps, maplen;
+	u32 epoch;
+	struct ceph_osdmap *newmap = NULL, *oldmap;
+	int err;
+	struct ceph_fsid fsid;
+
+	dout("handle_map have %u\n", osdc->osdmap ? osdc->osdmap->epoch : 0);
+	p = msg->front.iov_base;
+	end = p + msg->front.iov_len;
+
+	/* verify fsid */
+	ceph_decode_need(&p, end, sizeof(fsid), bad);
+	ceph_decode_copy(&p, &fsid, sizeof(fsid));
+	if (ceph_check_fsid(osdc->client, &fsid) < 0)
+		return;
+
+	down_write(&osdc->map_sem);
+
+	/* incremental maps */
+	ceph_decode_32_safe(&p, end, nr_maps, bad);
+	dout(" %d inc maps\n", nr_maps);
+	while (nr_maps > 0) {
+		ceph_decode_need(&p, end, 2*sizeof(u32), bad);
+		epoch = ceph_decode_32(&p);
+		maplen = ceph_decode_32(&p);
+		ceph_decode_need(&p, end, maplen, bad);
+		next = p + maplen;
+		if (osdc->osdmap && osdc->osdmap->epoch+1 == epoch) {
+			dout("applying incremental map %u len %d\n",
+			     epoch, maplen);
+			newmap = osdmap_apply_incremental(&p, next,
+							  osdc->osdmap,
+							  osdc->client->msgr);
+			if (IS_ERR(newmap)) {
+				err = PTR_ERR(newmap);
+				goto bad;
+			}
+			BUG_ON(!newmap);
+			if (newmap != osdc->osdmap) {
+				ceph_osdmap_destroy(osdc->osdmap);
+				osdc->osdmap = newmap;
+			}
+		} else {
+			dout("ignoring incremental map %u len %d\n",
+			     epoch, maplen);
+		}
+		p = next;
+		nr_maps--;
+	}
+	if (newmap)
+		goto done;
+
+	/* full maps */
+	ceph_decode_32_safe(&p, end, nr_maps, bad);
+	dout(" %d full maps\n", nr_maps);
+	while (nr_maps) {
+		ceph_decode_need(&p, end, 2*sizeof(u32), bad);
+		epoch = ceph_decode_32(&p);
+		maplen = ceph_decode_32(&p);
+		ceph_decode_need(&p, end, maplen, bad);
+		if (nr_maps > 1) {
+			dout("skipping non-latest full map %u len %d\n",
+			     epoch, maplen);
+		} else if (osdc->osdmap && osdc->osdmap->epoch >= epoch) {
+			dout("skipping full map %u len %d, "
+			     "older than our %u\n", epoch, maplen,
+			     osdc->osdmap->epoch);
+		} else {
+			dout("taking full map %u len %d\n", epoch, maplen);
+			newmap = osdmap_decode(&p, p+maplen);
+			if (IS_ERR(newmap)) {
+				err = PTR_ERR(newmap);
+				goto bad;
+			}
+			BUG_ON(!newmap);
+			oldmap = osdc->osdmap;
+			osdc->osdmap = newmap;
+			if (oldmap)
+				ceph_osdmap_destroy(oldmap);
+		}
+		p += maplen;
+		nr_maps--;
+	}
+
+done:
+	downgrade_write(&osdc->map_sem);
+	ceph_monc_got_osdmap(&osdc->client->monc, osdc->osdmap->epoch);
+	if (newmap)
+		kick_requests(osdc, NULL);
+	up_read(&osdc->map_sem);
+	return;
+
+bad:
+	pr_err("osdc handle_map corrupt msg\n");
+	ceph_msg_dump(msg);
+	up_write(&osdc->map_sem);
+	return;
+}
+
+
+/*
+ * A read request prepares specific pages that data is to be read into.
+ * When a message is being read off the wire, we call prepare_pages to
+ * find those pages.
+ *  0 = success, -1 failure.
+ */
+static int __prepare_pages(struct ceph_connection *con,
+			 struct ceph_msg_header *hdr,
+			 struct ceph_osd_request *req,
+			 u64 tid,
+			 struct ceph_msg *m)
+{
+	struct ceph_osd *osd = con->private;
+	struct ceph_osd_client *osdc;
+	int ret = -1;
+	int data_len = le32_to_cpu(hdr->data_len);
+	unsigned data_off = le16_to_cpu(hdr->data_off);
+
+	int want = calc_pages_for(data_off & ~PAGE_MASK, data_len);
+
+	if (!osd)
+		return -1;
+
+	osdc = osd->o_osdc;
+
+	dout("__prepare_pages on msg %p tid %llu, has %d pages, want %d\n", m,
+	     tid, req->r_num_pages, want);
+	if (unlikely(req->r_num_pages < want))
+		goto out;
+	m->pages = req->r_pages;
+	m->nr_pages = req->r_num_pages;
+	ret = 0; /* success */
+out:
+	BUG_ON(ret < 0 || m->nr_pages < want);
+
+	return ret;
+}
+
+/*
+ * Register request, send initial attempt.
+ */
+int ceph_osdc_start_request(struct ceph_osd_client *osdc,
+			    struct ceph_osd_request *req,
+			    bool nofail)
+{
+	int rc = 0;
+
+	req->r_request->pages = req->r_pages;
+	req->r_request->nr_pages = req->r_num_pages;
+
+	register_request(osdc, req);
+
+	down_read(&osdc->map_sem);
+	mutex_lock(&osdc->request_mutex);
+	/*
+	 * a racing kick_requests() may have sent the message for us
+	 * while we dropped request_mutex above, so only send now if
+	 * the request still han't been touched yet.
+	 */
+	if (req->r_sent == 0) {
+		rc = __send_request(osdc, req);
+		if (rc) {
+			if (nofail) {
+				dout("osdc_start_request failed send, "
+				     " marking %lld\n", req->r_tid);
+				req->r_resend = true;
+				rc = 0;
+			} else {
+				__unregister_request(osdc, req);
+			}
+		}
+	}
+	mutex_unlock(&osdc->request_mutex);
+	up_read(&osdc->map_sem);
+	return rc;
+}
+
+/*
+ * wait for a request to complete
+ */
+int ceph_osdc_wait_request(struct ceph_osd_client *osdc,
+			   struct ceph_osd_request *req)
+{
+	int rc;
+
+	rc = wait_for_completion_interruptible(&req->r_completion);
+	if (rc < 0) {
+		mutex_lock(&osdc->request_mutex);
+		__cancel_request(req);
+		__unregister_request(osdc, req);
+		mutex_unlock(&osdc->request_mutex);
+		dout("wait_request tid %llu canceled/timed out\n", req->r_tid);
+		return rc;
+	}
+
+	dout("wait_request tid %llu result %d\n", req->r_tid, req->r_result);
+	return req->r_result;
+}
+
+/*
+ * sync - wait for all in-flight requests to flush.  avoid starvation.
+ */
+void ceph_osdc_sync(struct ceph_osd_client *osdc)
+{
+	struct ceph_osd_request *req;
+	u64 last_tid, next_tid = 0;
+
+	mutex_lock(&osdc->request_mutex);
+	last_tid = osdc->last_tid;
+	while (1) {
+		req = __lookup_request_ge(osdc, next_tid);
+		if (!req)
+			break;
+		if (req->r_tid > last_tid)
+			break;
+
+		next_tid = req->r_tid + 1;
+		if ((req->r_flags & CEPH_OSD_FLAG_WRITE) == 0)
+			continue;
+
+		ceph_osdc_get_request(req);
+		mutex_unlock(&osdc->request_mutex);
+		dout("sync waiting on tid %llu (last is %llu)\n",
+		     req->r_tid, last_tid);
+		wait_for_completion(&req->r_safe_completion);
+		mutex_lock(&osdc->request_mutex);
+		ceph_osdc_put_request(req);
+	}
+	mutex_unlock(&osdc->request_mutex);
+	dout("sync done (thru tid %llu)\n", last_tid);
+}
+
+/*
+ * init, shutdown
+ */
+int ceph_osdc_init(struct ceph_osd_client *osdc, struct ceph_client *client)
+{
+	int err;
+
+	dout("init\n");
+	osdc->client = client;
+	osdc->osdmap = NULL;
+	init_rwsem(&osdc->map_sem);
+	init_completion(&osdc->map_waiters);
+	osdc->last_requested_map = 0;
+	mutex_init(&osdc->request_mutex);
+	osdc->last_tid = 0;
+	osdc->osds = RB_ROOT;
+	INIT_LIST_HEAD(&osdc->osd_lru);
+	osdc->requests = RB_ROOT;
+	INIT_LIST_HEAD(&osdc->req_lru);
+	osdc->num_requests = 0;
+	INIT_DELAYED_WORK(&osdc->timeout_work, handle_timeout);
+	INIT_DELAYED_WORK(&osdc->osds_timeout_work, handle_osds_timeout);
+
+	schedule_delayed_work(&osdc->osds_timeout_work,
+	   round_jiffies_relative(osdc->client->mount_args->osd_idle_ttl * HZ));
+
+	err = -ENOMEM;
+	osdc->req_mempool = mempool_create_kmalloc_pool(10,
+					sizeof(struct ceph_osd_request));
+	if (!osdc->req_mempool)
+		goto out;
+
+	err = ceph_msgpool_init(&osdc->msgpool_op, OSD_OP_FRONT_LEN, 10, true);
+	if (err < 0)
+		goto out_mempool;
+	err = ceph_msgpool_init(&osdc->msgpool_op_reply,
+				OSD_OPREPLY_FRONT_LEN, 10, true);
+	if (err < 0)
+		goto out_msgpool;
+	return 0;
+
+out_msgpool:
+	ceph_msgpool_destroy(&osdc->msgpool_op);
+out_mempool:
+	mempool_destroy(osdc->req_mempool);
+out:
+	return err;
+}
+
+void ceph_osdc_stop(struct ceph_osd_client *osdc)
+{
+	cancel_delayed_work_sync(&osdc->timeout_work);
+	cancel_delayed_work_sync(&osdc->osds_timeout_work);
+	if (osdc->osdmap) {
+		ceph_osdmap_destroy(osdc->osdmap);
+		osdc->osdmap = NULL;
+	}
+	remove_old_osds(osdc, 1);
+	mempool_destroy(osdc->req_mempool);
+	ceph_msgpool_destroy(&osdc->msgpool_op);
+	ceph_msgpool_destroy(&osdc->msgpool_op_reply);
+}
+
+/*
+ * Read some contiguous pages.  If we cross a stripe boundary, shorten
+ * *plen.  Return number of bytes read, or error.
+ */
+int ceph_osdc_readpages(struct ceph_osd_client *osdc,
+			struct ceph_vino vino, struct ceph_file_layout *layout,
+			u64 off, u64 *plen,
+			u32 truncate_seq, u64 truncate_size,
+			struct page **pages, int num_pages)
+{
+	struct ceph_osd_request *req;
+	int rc = 0;
+
+	dout("readpages on ino %llx.%llx on %llu~%llu\n", vino.ino,
+	     vino.snap, off, *plen);
+	req = ceph_osdc_new_request(osdc, layout, vino, off, plen,
+				    CEPH_OSD_OP_READ, CEPH_OSD_FLAG_READ,
+				    NULL, 0, truncate_seq, truncate_size, NULL,
+				    false, 1);
+	if (IS_ERR(req))
+		return PTR_ERR(req);
+
+	/* it may be a short read due to an object boundary */
+	req->r_pages = pages;
+	num_pages = calc_pages_for(off, *plen);
+	req->r_num_pages = num_pages;
+
+	dout("readpages  final extent is %llu~%llu (%d pages)\n",
+	     off, *plen, req->r_num_pages);
+
+	rc = ceph_osdc_start_request(osdc, req, false);
+	if (!rc)
+		rc = ceph_osdc_wait_request(osdc, req);
+
+	ceph_osdc_put_request(req);
+	dout("readpages result %d\n", rc);
+	return rc;
+}
+
+/*
+ * do a synchronous write on N pages
+ */
+int ceph_osdc_writepages(struct ceph_osd_client *osdc, struct ceph_vino vino,
+			 struct ceph_file_layout *layout,
+			 struct ceph_snap_context *snapc,
+			 u64 off, u64 len,
+			 u32 truncate_seq, u64 truncate_size,
+			 struct timespec *mtime,
+			 struct page **pages, int num_pages,
+			 int flags, int do_sync, bool nofail)
+{
+	struct ceph_osd_request *req;
+	int rc = 0;
+
+	BUG_ON(vino.snap != CEPH_NOSNAP);
+	req = ceph_osdc_new_request(osdc, layout, vino, off, &len,
+				    CEPH_OSD_OP_WRITE,
+				    flags | CEPH_OSD_FLAG_ONDISK |
+					    CEPH_OSD_FLAG_WRITE,
+				    snapc, do_sync,
+				    truncate_seq, truncate_size, mtime,
+				    nofail, 1);
+	if (IS_ERR(req))
+		return PTR_ERR(req);
+
+	/* it may be a short write due to an object boundary */
+	req->r_pages = pages;
+	req->r_num_pages = calc_pages_for(off, len);
+	dout("writepages %llu~%llu (%d pages)\n", off, len,
+	     req->r_num_pages);
+
+	rc = ceph_osdc_start_request(osdc, req, nofail);
+	if (!rc)
+		rc = ceph_osdc_wait_request(osdc, req);
+
+	ceph_osdc_put_request(req);
+	if (rc == 0)
+		rc = len;
+	dout("writepages result %d\n", rc);
+	return rc;
+}
+
+/*
+ * handle incoming message
+ */
+static void dispatch(struct ceph_connection *con, struct ceph_msg *msg)
+{
+	struct ceph_osd *osd = con->private;
+	struct ceph_osd_client *osdc;
+	int type = le16_to_cpu(msg->hdr.type);
+
+	if (!osd)
+		return;
+	osdc = osd->o_osdc;
+
+	switch (type) {
+	case CEPH_MSG_OSD_MAP:
+		ceph_osdc_handle_map(osdc, msg);
+		break;
+	case CEPH_MSG_OSD_OPREPLY:
+		handle_reply(osdc, msg, con);
+		break;
+
+	default:
+		pr_err("received unknown message type %d %s\n", type,
+		       ceph_msg_type_name(type));
+	}
+	ceph_msg_put(msg);
+}
+
+/*
+ * lookup and return message for incoming reply
+ */
+static struct ceph_msg *get_reply(struct ceph_connection *con,
+				  struct ceph_msg_header *hdr,
+				  int *skip)
+{
+	struct ceph_osd *osd = con->private;
+	struct ceph_osd_client *osdc = osd->o_osdc;
+	struct ceph_msg *m;
+	struct ceph_osd_request *req;
+	int front = le32_to_cpu(hdr->front_len);
+	int data_len = le32_to_cpu(hdr->data_len);
+	u64 tid;
+	int err;
+
+	tid = le64_to_cpu(hdr->tid);
+	mutex_lock(&osdc->request_mutex);
+	req = __lookup_request(osdc, tid);
+	if (!req) {
+		*skip = 1;
+		m = NULL;
+		pr_info("get_reply unknown tid %llu from osd%d\n", tid,
+			osd->o_osd);
+		goto out;
+	}
+
+	if (req->r_con_filling_msg) {
+		dout("get_reply revoking msg %p from old con %p\n",
+		     req->r_reply, req->r_con_filling_msg);
+		ceph_con_revoke_message(req->r_con_filling_msg, req->r_reply);
+		ceph_con_put(req->r_con_filling_msg);
+	}
+
+	if (front > req->r_reply->front.iov_len) {
+		pr_warning("get_reply front %d > preallocated %d\n",
+			   front, (int)req->r_reply->front.iov_len);
+		m = ceph_msg_new(CEPH_MSG_OSD_OPREPLY, front, 0, 0, NULL);
+		if (IS_ERR(m))
+			goto out;
+		ceph_msg_put(req->r_reply);
+		req->r_reply = m;
+	}
+	m = ceph_msg_get(req->r_reply);
+
+	if (data_len > 0) {
+		err = __prepare_pages(con, hdr, req, tid, m);
+		if (err < 0) {
+			*skip = 1;
+			ceph_msg_put(m);
+			m = ERR_PTR(err);
+		}
+	}
+	*skip = 0;
+	req->r_con_filling_msg = ceph_con_get(con);
+	dout("get_reply tid %lld %p\n", tid, m);
+
+out:
+	mutex_unlock(&osdc->request_mutex);
+	return m;
+
+}
+
+static struct ceph_msg *alloc_msg(struct ceph_connection *con,
+				  struct ceph_msg_header *hdr,
+				  int *skip)
+{
+	struct ceph_osd *osd = con->private;
+	int type = le16_to_cpu(hdr->type);
+	int front = le32_to_cpu(hdr->front_len);
+
+	switch (type) {
+	case CEPH_MSG_OSD_MAP:
+		return ceph_msg_new(type, front, 0, 0, NULL);
+	case CEPH_MSG_OSD_OPREPLY:
+		return get_reply(con, hdr, skip);
+	default:
+		pr_info("alloc_msg unexpected msg type %d from osd%d\n", type,
+			osd->o_osd);
+		*skip = 1;
+		return NULL;
+	}
+}
+
+/*
+ * Wrappers to refcount containing ceph_osd struct
+ */
+static struct ceph_connection *get_osd_con(struct ceph_connection *con)
+{
+	struct ceph_osd *osd = con->private;
+	if (get_osd(osd))
+		return con;
+	return NULL;
+}
+
+static void put_osd_con(struct ceph_connection *con)
+{
+	struct ceph_osd *osd = con->private;
+	put_osd(osd);
+}
+
+/*
+ * authentication
+ */
+static int get_authorizer(struct ceph_connection *con,
+	                  void **buf, int *len, int *proto,
+	                  void **reply_buf, int *reply_len, int force_new)
+{
+	struct ceph_osd *o = con->private;
+	struct ceph_osd_client *osdc = o->o_osdc;
+	struct ceph_auth_client *ac = osdc->client->monc.auth;
+	int ret = 0;
+
+	if (force_new && o->o_authorizer) {
+		ac->ops->destroy_authorizer(ac, o->o_authorizer);
+		o->o_authorizer = NULL;
+	}
+	if (o->o_authorizer == NULL) {
+		ret = ac->ops->create_authorizer(
+			ac, CEPH_ENTITY_TYPE_OSD,
+			&o->o_authorizer,
+			&o->o_authorizer_buf,
+			&o->o_authorizer_buf_len,
+			&o->o_authorizer_reply_buf,
+			&o->o_authorizer_reply_buf_len);
+		if (ret)
+		return ret;
+	}
+
+	*proto = ac->protocol;
+	*buf = o->o_authorizer_buf;
+	*len = o->o_authorizer_buf_len;
+	*reply_buf = o->o_authorizer_reply_buf;
+	*reply_len = o->o_authorizer_reply_buf_len;
+	return 0;
+}
+
+
+static int verify_authorizer_reply(struct ceph_connection *con, int len)
+{
+	struct ceph_osd *o = con->private;
+	struct ceph_osd_client *osdc = o->o_osdc;
+	struct ceph_auth_client *ac = osdc->client->monc.auth;
+
+	return ac->ops->verify_authorizer_reply(ac, o->o_authorizer, len);
+}
+
+static int invalidate_authorizer(struct ceph_connection *con)
+{
+	struct ceph_osd *o = con->private;
+	struct ceph_osd_client *osdc = o->o_osdc;
+	struct ceph_auth_client *ac = osdc->client->monc.auth;
+
+	if (ac->ops->invalidate_authorizer)
+		ac->ops->invalidate_authorizer(ac, CEPH_ENTITY_TYPE_OSD);
+
+	return ceph_monc_validate_auth(&osdc->client->monc);
+}
+
+const static struct ceph_connection_operations osd_con_ops = {
+	.get = get_osd_con,
+	.put = put_osd_con,
+	.dispatch = dispatch,
+	.get_authorizer = get_authorizer,
+	.verify_authorizer_reply = verify_authorizer_reply,
+	.invalidate_authorizer = invalidate_authorizer,
+	.alloc_msg = alloc_msg,
+	.fault = osd_reset,
+};
diff --git a/fs/ceph/osd_client.h b/fs/ceph/osd_client.h
new file mode 100644
index 000000000000..1b1a3ca43afc
--- /dev/null
+++ b/fs/ceph/osd_client.h
@@ -0,0 +1,166 @@
+#ifndef _FS_CEPH_OSD_CLIENT_H
+#define _FS_CEPH_OSD_CLIENT_H
+
+#include <linux/completion.h>
+#include <linux/kref.h>
+#include <linux/mempool.h>
+#include <linux/rbtree.h>
+
+#include "types.h"
+#include "osdmap.h"
+#include "messenger.h"
+
+struct ceph_msg;
+struct ceph_snap_context;
+struct ceph_osd_request;
+struct ceph_osd_client;
+struct ceph_authorizer;
+
+/*
+ * completion callback for async writepages
+ */
+typedef void (*ceph_osdc_callback_t)(struct ceph_osd_request *,
+				     struct ceph_msg *);
+
+/* a given osd we're communicating with */
+struct ceph_osd {
+	atomic_t o_ref;
+	struct ceph_osd_client *o_osdc;
+	int o_osd;
+	int o_incarnation;
+	struct rb_node o_node;
+	struct ceph_connection o_con;
+	struct list_head o_requests;
+	struct list_head o_osd_lru;
+	struct ceph_authorizer *o_authorizer;
+	void *o_authorizer_buf, *o_authorizer_reply_buf;
+	size_t o_authorizer_buf_len, o_authorizer_reply_buf_len;
+	unsigned long lru_ttl;
+	int o_marked_for_keepalive;
+	struct list_head o_keepalive_item;
+};
+
+/* an in-flight request */
+struct ceph_osd_request {
+	u64             r_tid;              /* unique for this client */
+	struct rb_node  r_node;
+	struct list_head r_req_lru_item;
+	struct list_head r_osd_item;
+	struct ceph_osd *r_osd;
+	struct ceph_pg   r_pgid;
+
+	struct ceph_connection *r_con_filling_msg;
+
+	struct ceph_msg  *r_request, *r_reply;
+	int               r_result;
+	int               r_flags;     /* any additional flags for the osd */
+	u32               r_sent;      /* >0 if r_request is sending/sent */
+	int               r_got_reply;
+
+	struct ceph_osd_client *r_osdc;
+	struct kref       r_kref;
+	bool              r_mempool;
+	struct completion r_completion, r_safe_completion;
+	ceph_osdc_callback_t r_callback, r_safe_callback;
+	struct ceph_eversion r_reassert_version;
+	struct list_head  r_unsafe_item;
+
+	struct inode *r_inode;         	      /* for use by callbacks */
+	struct writeback_control *r_wbc;      /* ditto */
+
+	char              r_oid[40];          /* object name */
+	int               r_oid_len;
+	unsigned long     r_sent_stamp;
+	bool              r_resend;           /* msg send failed, needs retry */
+
+	struct ceph_file_layout r_file_layout;
+	struct ceph_snap_context *r_snapc;    /* snap context for writes */
+	unsigned          r_num_pages;        /* size of page array (follows) */
+	struct page     **r_pages;            /* pages for data payload */
+	int               r_pages_from_pool;
+	int               r_own_pages;        /* if true, i own page list */
+};
+
+struct ceph_osd_client {
+	struct ceph_client     *client;
+
+	struct ceph_osdmap     *osdmap;       /* current map */
+	struct rw_semaphore    map_sem;
+	struct completion      map_waiters;
+	u64                    last_requested_map;
+
+	struct mutex           request_mutex;
+	struct rb_root         osds;          /* osds */
+	struct list_head       osd_lru;       /* idle osds */
+	u64                    timeout_tid;   /* tid of timeout triggering rq */
+	u64                    last_tid;      /* tid of last request */
+	struct rb_root         requests;      /* pending requests */
+	struct list_head       req_lru;	      /* pending requests lru */
+	int                    num_requests;
+	struct delayed_work    timeout_work;
+	struct delayed_work    osds_timeout_work;
+#ifdef CONFIG_DEBUG_FS
+	struct dentry 	       *debugfs_file;
+#endif
+
+	mempool_t              *req_mempool;
+
+	struct ceph_msgpool	msgpool_op;
+	struct ceph_msgpool	msgpool_op_reply;
+};
+
+extern int ceph_osdc_init(struct ceph_osd_client *osdc,
+			  struct ceph_client *client);
+extern void ceph_osdc_stop(struct ceph_osd_client *osdc);
+
+extern void ceph_osdc_handle_reply(struct ceph_osd_client *osdc,
+				   struct ceph_msg *msg);
+extern void ceph_osdc_handle_map(struct ceph_osd_client *osdc,
+				 struct ceph_msg *msg);
+
+extern struct ceph_osd_request *ceph_osdc_new_request(struct ceph_osd_client *,
+				      struct ceph_file_layout *layout,
+				      struct ceph_vino vino,
+				      u64 offset, u64 *len, int op, int flags,
+				      struct ceph_snap_context *snapc,
+				      int do_sync, u32 truncate_seq,
+				      u64 truncate_size,
+				      struct timespec *mtime,
+				      bool use_mempool, int num_reply);
+
+static inline void ceph_osdc_get_request(struct ceph_osd_request *req)
+{
+	kref_get(&req->r_kref);
+}
+extern void ceph_osdc_release_request(struct kref *kref);
+static inline void ceph_osdc_put_request(struct ceph_osd_request *req)
+{
+	kref_put(&req->r_kref, ceph_osdc_release_request);
+}
+
+extern int ceph_osdc_start_request(struct ceph_osd_client *osdc,
+				   struct ceph_osd_request *req,
+				   bool nofail);
+extern int ceph_osdc_wait_request(struct ceph_osd_client *osdc,
+				  struct ceph_osd_request *req);
+extern void ceph_osdc_sync(struct ceph_osd_client *osdc);
+
+extern int ceph_osdc_readpages(struct ceph_osd_client *osdc,
+			       struct ceph_vino vino,
+			       struct ceph_file_layout *layout,
+			       u64 off, u64 *plen,
+			       u32 truncate_seq, u64 truncate_size,
+			       struct page **pages, int nr_pages);
+
+extern int ceph_osdc_writepages(struct ceph_osd_client *osdc,
+				struct ceph_vino vino,
+				struct ceph_file_layout *layout,
+				struct ceph_snap_context *sc,
+				u64 off, u64 len,
+				u32 truncate_seq, u64 truncate_size,
+				struct timespec *mtime,
+				struct page **pages, int nr_pages,
+				int flags, int do_sync, bool nofail);
+
+#endif
+
diff --git a/fs/ceph/osdmap.c b/fs/ceph/osdmap.c
new file mode 100644
index 000000000000..b83f2692b835
--- /dev/null
+++ b/fs/ceph/osdmap.c
@@ -0,0 +1,1019 @@
+
+#include <asm/div64.h>
+
+#include "super.h"
+#include "osdmap.h"
+#include "crush/hash.h"
+#include "crush/mapper.h"
+#include "decode.h"
+#include "ceph_debug.h"
+
+char *ceph_osdmap_state_str(char *str, int len, int state)
+{
+	int flag = 0;
+
+	if (!len)
+		goto done;
+
+	*str = '\0';
+	if (state) {
+		if (state & CEPH_OSD_EXISTS) {
+			snprintf(str, len, "exists");
+			flag = 1;
+		}
+		if (state & CEPH_OSD_UP) {
+			snprintf(str, len, "%s%s%s", str, (flag ? ", " : ""),
+				 "up");
+			flag = 1;
+		}
+	} else {
+		snprintf(str, len, "doesn't exist");
+	}
+done:
+	return str;
+}
+
+/* maps */
+
+static int calc_bits_of(unsigned t)
+{
+	int b = 0;
+	while (t) {
+		t = t >> 1;
+		b++;
+	}
+	return b;
+}
+
+/*
+ * the foo_mask is the smallest value 2^n-1 that is >= foo.
+ */
+static void calc_pg_masks(struct ceph_pg_pool_info *pi)
+{
+	pi->pg_num_mask = (1 << calc_bits_of(le32_to_cpu(pi->v.pg_num)-1)) - 1;
+	pi->pgp_num_mask =
+		(1 << calc_bits_of(le32_to_cpu(pi->v.pgp_num)-1)) - 1;
+	pi->lpg_num_mask =
+		(1 << calc_bits_of(le32_to_cpu(pi->v.lpg_num)-1)) - 1;
+	pi->lpgp_num_mask =
+		(1 << calc_bits_of(le32_to_cpu(pi->v.lpgp_num)-1)) - 1;
+}
+
+/*
+ * decode crush map
+ */
+static int crush_decode_uniform_bucket(void **p, void *end,
+				       struct crush_bucket_uniform *b)
+{
+	dout("crush_decode_uniform_bucket %p to %p\n", *p, end);
+	ceph_decode_need(p, end, (1+b->h.size) * sizeof(u32), bad);
+	b->item_weight = ceph_decode_32(p);
+	return 0;
+bad:
+	return -EINVAL;
+}
+
+static int crush_decode_list_bucket(void **p, void *end,
+				    struct crush_bucket_list *b)
+{
+	int j;
+	dout("crush_decode_list_bucket %p to %p\n", *p, end);
+	b->item_weights = kcalloc(b->h.size, sizeof(u32), GFP_NOFS);
+	if (b->item_weights == NULL)
+		return -ENOMEM;
+	b->sum_weights = kcalloc(b->h.size, sizeof(u32), GFP_NOFS);
+	if (b->sum_weights == NULL)
+		return -ENOMEM;
+	ceph_decode_need(p, end, 2 * b->h.size * sizeof(u32), bad);
+	for (j = 0; j < b->h.size; j++) {
+		b->item_weights[j] = ceph_decode_32(p);
+		b->sum_weights[j] = ceph_decode_32(p);
+	}
+	return 0;
+bad:
+	return -EINVAL;
+}
+
+static int crush_decode_tree_bucket(void **p, void *end,
+				    struct crush_bucket_tree *b)
+{
+	int j;
+	dout("crush_decode_tree_bucket %p to %p\n", *p, end);
+	ceph_decode_32_safe(p, end, b->num_nodes, bad);
+	b->node_weights = kcalloc(b->num_nodes, sizeof(u32), GFP_NOFS);
+	if (b->node_weights == NULL)
+		return -ENOMEM;
+	ceph_decode_need(p, end, b->num_nodes * sizeof(u32), bad);
+	for (j = 0; j < b->num_nodes; j++)
+		b->node_weights[j] = ceph_decode_32(p);
+	return 0;
+bad:
+	return -EINVAL;
+}
+
+static int crush_decode_straw_bucket(void **p, void *end,
+				     struct crush_bucket_straw *b)
+{
+	int j;
+	dout("crush_decode_straw_bucket %p to %p\n", *p, end);
+	b->item_weights = kcalloc(b->h.size, sizeof(u32), GFP_NOFS);
+	if (b->item_weights == NULL)
+		return -ENOMEM;
+	b->straws = kcalloc(b->h.size, sizeof(u32), GFP_NOFS);
+	if (b->straws == NULL)
+		return -ENOMEM;
+	ceph_decode_need(p, end, 2 * b->h.size * sizeof(u32), bad);
+	for (j = 0; j < b->h.size; j++) {
+		b->item_weights[j] = ceph_decode_32(p);
+		b->straws[j] = ceph_decode_32(p);
+	}
+	return 0;
+bad:
+	return -EINVAL;
+}
+
+static struct crush_map *crush_decode(void *pbyval, void *end)
+{
+	struct crush_map *c;
+	int err = -EINVAL;
+	int i, j;
+	void **p = &pbyval;
+	void *start = pbyval;
+	u32 magic;
+
+	dout("crush_decode %p to %p len %d\n", *p, end, (int)(end - *p));
+
+	c = kzalloc(sizeof(*c), GFP_NOFS);
+	if (c == NULL)
+		return ERR_PTR(-ENOMEM);
+
+	ceph_decode_need(p, end, 4*sizeof(u32), bad);
+	magic = ceph_decode_32(p);
+	if (magic != CRUSH_MAGIC) {
+		pr_err("crush_decode magic %x != current %x\n",
+		       (unsigned)magic, (unsigned)CRUSH_MAGIC);
+		goto bad;
+	}
+	c->max_buckets = ceph_decode_32(p);
+	c->max_rules = ceph_decode_32(p);
+	c->max_devices = ceph_decode_32(p);
+
+	c->device_parents = kcalloc(c->max_devices, sizeof(u32), GFP_NOFS);
+	if (c->device_parents == NULL)
+		goto badmem;
+	c->bucket_parents = kcalloc(c->max_buckets, sizeof(u32), GFP_NOFS);
+	if (c->bucket_parents == NULL)
+		goto badmem;
+
+	c->buckets = kcalloc(c->max_buckets, sizeof(*c->buckets), GFP_NOFS);
+	if (c->buckets == NULL)
+		goto badmem;
+	c->rules = kcalloc(c->max_rules, sizeof(*c->rules), GFP_NOFS);
+	if (c->rules == NULL)
+		goto badmem;
+
+	/* buckets */
+	for (i = 0; i < c->max_buckets; i++) {
+		int size = 0;
+		u32 alg;
+		struct crush_bucket *b;
+
+		ceph_decode_32_safe(p, end, alg, bad);
+		if (alg == 0) {
+			c->buckets[i] = NULL;
+			continue;
+		}
+		dout("crush_decode bucket %d off %x %p to %p\n",
+		     i, (int)(*p-start), *p, end);
+
+		switch (alg) {
+		case CRUSH_BUCKET_UNIFORM:
+			size = sizeof(struct crush_bucket_uniform);
+			break;
+		case CRUSH_BUCKET_LIST:
+			size = sizeof(struct crush_bucket_list);
+			break;
+		case CRUSH_BUCKET_TREE:
+			size = sizeof(struct crush_bucket_tree);
+			break;
+		case CRUSH_BUCKET_STRAW:
+			size = sizeof(struct crush_bucket_straw);
+			break;
+		default:
+			err = -EINVAL;
+			goto bad;
+		}
+		BUG_ON(size == 0);
+		b = c->buckets[i] = kzalloc(size, GFP_NOFS);
+		if (b == NULL)
+			goto badmem;
+
+		ceph_decode_need(p, end, 4*sizeof(u32), bad);
+		b->id = ceph_decode_32(p);
+		b->type = ceph_decode_16(p);
+		b->alg = ceph_decode_8(p);
+		b->hash = ceph_decode_8(p);
+		b->weight = ceph_decode_32(p);
+		b->size = ceph_decode_32(p);
+
+		dout("crush_decode bucket size %d off %x %p to %p\n",
+		     b->size, (int)(*p-start), *p, end);
+
+		b->items = kcalloc(b->size, sizeof(__s32), GFP_NOFS);
+		if (b->items == NULL)
+			goto badmem;
+		b->perm = kcalloc(b->size, sizeof(u32), GFP_NOFS);
+		if (b->perm == NULL)
+			goto badmem;
+		b->perm_n = 0;
+
+		ceph_decode_need(p, end, b->size*sizeof(u32), bad);
+		for (j = 0; j < b->size; j++)
+			b->items[j] = ceph_decode_32(p);
+
+		switch (b->alg) {
+		case CRUSH_BUCKET_UNIFORM:
+			err = crush_decode_uniform_bucket(p, end,
+				  (struct crush_bucket_uniform *)b);
+			if (err < 0)
+				goto bad;
+			break;
+		case CRUSH_BUCKET_LIST:
+			err = crush_decode_list_bucket(p, end,
+			       (struct crush_bucket_list *)b);
+			if (err < 0)
+				goto bad;
+			break;
+		case CRUSH_BUCKET_TREE:
+			err = crush_decode_tree_bucket(p, end,
+				(struct crush_bucket_tree *)b);
+			if (err < 0)
+				goto bad;
+			break;
+		case CRUSH_BUCKET_STRAW:
+			err = crush_decode_straw_bucket(p, end,
+				(struct crush_bucket_straw *)b);
+			if (err < 0)
+				goto bad;
+			break;
+		}
+	}
+
+	/* rules */
+	dout("rule vec is %p\n", c->rules);
+	for (i = 0; i < c->max_rules; i++) {
+		u32 yes;
+		struct crush_rule *r;
+
+		ceph_decode_32_safe(p, end, yes, bad);
+		if (!yes) {
+			dout("crush_decode NO rule %d off %x %p to %p\n",
+			     i, (int)(*p-start), *p, end);
+			c->rules[i] = NULL;
+			continue;
+		}
+
+		dout("crush_decode rule %d off %x %p to %p\n",
+		     i, (int)(*p-start), *p, end);
+
+		/* len */
+		ceph_decode_32_safe(p, end, yes, bad);
+#if BITS_PER_LONG == 32
+		err = -EINVAL;
+		if (yes > ULONG_MAX / sizeof(struct crush_rule_step))
+			goto bad;
+#endif
+		r = c->rules[i] = kmalloc(sizeof(*r) +
+					  yes*sizeof(struct crush_rule_step),
+					  GFP_NOFS);
+		if (r == NULL)
+			goto badmem;
+		dout(" rule %d is at %p\n", i, r);
+		r->len = yes;
+		ceph_decode_copy_safe(p, end, &r->mask, 4, bad); /* 4 u8's */
+		ceph_decode_need(p, end, r->len*3*sizeof(u32), bad);
+		for (j = 0; j < r->len; j++) {
+			r->steps[j].op = ceph_decode_32(p);
+			r->steps[j].arg1 = ceph_decode_32(p);
+			r->steps[j].arg2 = ceph_decode_32(p);
+		}
+	}
+
+	/* ignore trailing name maps. */
+
+	dout("crush_decode success\n");
+	return c;
+
+badmem:
+	err = -ENOMEM;
+bad:
+	dout("crush_decode fail %d\n", err);
+	crush_destroy(c);
+	return ERR_PTR(err);
+}
+
+
+/*
+ * osd map
+ */
+void ceph_osdmap_destroy(struct ceph_osdmap *map)
+{
+	dout("osdmap_destroy %p\n", map);
+	if (map->crush)
+		crush_destroy(map->crush);
+	while (!RB_EMPTY_ROOT(&map->pg_temp)) {
+		struct ceph_pg_mapping *pg =
+			rb_entry(rb_first(&map->pg_temp),
+				 struct ceph_pg_mapping, node);
+		rb_erase(&pg->node, &map->pg_temp);
+		kfree(pg);
+	}
+	while (!RB_EMPTY_ROOT(&map->pg_pools)) {
+		struct ceph_pg_pool_info *pi =
+			rb_entry(rb_first(&map->pg_pools),
+				 struct ceph_pg_pool_info, node);
+		rb_erase(&pi->node, &map->pg_pools);
+		kfree(pi);
+	}
+	kfree(map->osd_state);
+	kfree(map->osd_weight);
+	kfree(map->osd_addr);
+	kfree(map);
+}
+
+/*
+ * adjust max osd value.  reallocate arrays.
+ */
+static int osdmap_set_max_osd(struct ceph_osdmap *map, int max)
+{
+	u8 *state;
+	struct ceph_entity_addr *addr;
+	u32 *weight;
+
+	state = kcalloc(max, sizeof(*state), GFP_NOFS);
+	addr = kcalloc(max, sizeof(*addr), GFP_NOFS);
+	weight = kcalloc(max, sizeof(*weight), GFP_NOFS);
+	if (state == NULL || addr == NULL || weight == NULL) {
+		kfree(state);
+		kfree(addr);
+		kfree(weight);
+		return -ENOMEM;
+	}
+
+	/* copy old? */
+	if (map->osd_state) {
+		memcpy(state, map->osd_state, map->max_osd*sizeof(*state));
+		memcpy(addr, map->osd_addr, map->max_osd*sizeof(*addr));
+		memcpy(weight, map->osd_weight, map->max_osd*sizeof(*weight));
+		kfree(map->osd_state);
+		kfree(map->osd_addr);
+		kfree(map->osd_weight);
+	}
+
+	map->osd_state = state;
+	map->osd_weight = weight;
+	map->osd_addr = addr;
+	map->max_osd = max;
+	return 0;
+}
+
+/*
+ * rbtree of pg_mapping for handling pg_temp (explicit mapping of pgid
+ * to a set of osds)
+ */
+static int pgid_cmp(struct ceph_pg l, struct ceph_pg r)
+{
+	u64 a = *(u64 *)&l;
+	u64 b = *(u64 *)&r;
+
+	if (a < b)
+		return -1;
+	if (a > b)
+		return 1;
+	return 0;
+}
+
+static int __insert_pg_mapping(struct ceph_pg_mapping *new,
+			       struct rb_root *root)
+{
+	struct rb_node **p = &root->rb_node;
+	struct rb_node *parent = NULL;
+	struct ceph_pg_mapping *pg = NULL;
+	int c;
+
+	while (*p) {
+		parent = *p;
+		pg = rb_entry(parent, struct ceph_pg_mapping, node);
+		c = pgid_cmp(new->pgid, pg->pgid);
+		if (c < 0)
+			p = &(*p)->rb_left;
+		else if (c > 0)
+			p = &(*p)->rb_right;
+		else
+			return -EEXIST;
+	}
+
+	rb_link_node(&new->node, parent, p);
+	rb_insert_color(&new->node, root);
+	return 0;
+}
+
+static struct ceph_pg_mapping *__lookup_pg_mapping(struct rb_root *root,
+						   struct ceph_pg pgid)
+{
+	struct rb_node *n = root->rb_node;
+	struct ceph_pg_mapping *pg;
+	int c;
+
+	while (n) {
+		pg = rb_entry(n, struct ceph_pg_mapping, node);
+		c = pgid_cmp(pgid, pg->pgid);
+		if (c < 0)
+			n = n->rb_left;
+		else if (c > 0)
+			n = n->rb_right;
+		else
+			return pg;
+	}
+	return NULL;
+}
+
+/*
+ * rbtree of pg pool info
+ */
+static int __insert_pg_pool(struct rb_root *root, struct ceph_pg_pool_info *new)
+{
+	struct rb_node **p = &root->rb_node;
+	struct rb_node *parent = NULL;
+	struct ceph_pg_pool_info *pi = NULL;
+
+	while (*p) {
+		parent = *p;
+		pi = rb_entry(parent, struct ceph_pg_pool_info, node);
+		if (new->id < pi->id)
+			p = &(*p)->rb_left;
+		else if (new->id > pi->id)
+			p = &(*p)->rb_right;
+		else
+			return -EEXIST;
+	}
+
+	rb_link_node(&new->node, parent, p);
+	rb_insert_color(&new->node, root);
+	return 0;
+}
+
+static struct ceph_pg_pool_info *__lookup_pg_pool(struct rb_root *root, int id)
+{
+	struct ceph_pg_pool_info *pi;
+	struct rb_node *n = root->rb_node;
+
+	while (n) {
+		pi = rb_entry(n, struct ceph_pg_pool_info, node);
+		if (id < pi->id)
+			n = n->rb_left;
+		else if (id > pi->id)
+			n = n->rb_right;
+		else
+			return pi;
+	}
+	return NULL;
+}
+
+/*
+ * decode a full map.
+ */
+struct ceph_osdmap *osdmap_decode(void **p, void *end)
+{
+	struct ceph_osdmap *map;
+	u16 version;
+	u32 len, max, i;
+	u8 ev;
+	int err = -EINVAL;
+	void *start = *p;
+	struct ceph_pg_pool_info *pi;
+
+	dout("osdmap_decode %p to %p len %d\n", *p, end, (int)(end - *p));
+
+	map = kzalloc(sizeof(*map), GFP_NOFS);
+	if (map == NULL)
+		return ERR_PTR(-ENOMEM);
+	map->pg_temp = RB_ROOT;
+
+	ceph_decode_16_safe(p, end, version, bad);
+	if (version > CEPH_OSDMAP_VERSION) {
+		pr_warning("got unknown v %d > %d of osdmap\n", version,
+			   CEPH_OSDMAP_VERSION);
+		goto bad;
+	}
+
+	ceph_decode_need(p, end, 2*sizeof(u64)+6*sizeof(u32), bad);
+	ceph_decode_copy(p, &map->fsid, sizeof(map->fsid));
+	map->epoch = ceph_decode_32(p);
+	ceph_decode_copy(p, &map->created, sizeof(map->created));
+	ceph_decode_copy(p, &map->modified, sizeof(map->modified));
+
+	ceph_decode_32_safe(p, end, max, bad);
+	while (max--) {
+		ceph_decode_need(p, end, 4 + 1 + sizeof(pi->v), bad);
+		pi = kmalloc(sizeof(*pi), GFP_NOFS);
+		if (!pi)
+			goto bad;
+		pi->id = ceph_decode_32(p);
+		ev = ceph_decode_8(p); /* encoding version */
+		if (ev > CEPH_PG_POOL_VERSION) {
+			pr_warning("got unknown v %d > %d of ceph_pg_pool\n",
+				   ev, CEPH_PG_POOL_VERSION);
+			goto bad;
+		}
+		ceph_decode_copy(p, &pi->v, sizeof(pi->v));
+		__insert_pg_pool(&map->pg_pools, pi);
+		calc_pg_masks(pi);
+		*p += le32_to_cpu(pi->v.num_snaps) * sizeof(u64);
+		*p += le32_to_cpu(pi->v.num_removed_snap_intervals)
+			* sizeof(u64) * 2;
+	}
+	ceph_decode_32_safe(p, end, map->pool_max, bad);
+
+	ceph_decode_32_safe(p, end, map->flags, bad);
+
+	max = ceph_decode_32(p);
+
+	/* (re)alloc osd arrays */
+	err = osdmap_set_max_osd(map, max);
+	if (err < 0)
+		goto bad;
+	dout("osdmap_decode max_osd = %d\n", map->max_osd);
+
+	/* osds */
+	err = -EINVAL;
+	ceph_decode_need(p, end, 3*sizeof(u32) +
+			 map->max_osd*(1 + sizeof(*map->osd_weight) +
+				       sizeof(*map->osd_addr)), bad);
+	*p += 4; /* skip length field (should match max) */
+	ceph_decode_copy(p, map->osd_state, map->max_osd);
+
+	*p += 4; /* skip length field (should match max) */
+	for (i = 0; i < map->max_osd; i++)
+		map->osd_weight[i] = ceph_decode_32(p);
+
+	*p += 4; /* skip length field (should match max) */
+	ceph_decode_copy(p, map->osd_addr, map->max_osd*sizeof(*map->osd_addr));
+	for (i = 0; i < map->max_osd; i++)
+		ceph_decode_addr(&map->osd_addr[i]);
+
+	/* pg_temp */
+	ceph_decode_32_safe(p, end, len, bad);
+	for (i = 0; i < len; i++) {
+		int n, j;
+		struct ceph_pg pgid;
+		struct ceph_pg_mapping *pg;
+
+		ceph_decode_need(p, end, sizeof(u32) + sizeof(u64), bad);
+		ceph_decode_copy(p, &pgid, sizeof(pgid));
+		n = ceph_decode_32(p);
+		ceph_decode_need(p, end, n * sizeof(u32), bad);
+		err = -ENOMEM;
+		pg = kmalloc(sizeof(*pg) + n*sizeof(u32), GFP_NOFS);
+		if (!pg)
+			goto bad;
+		pg->pgid = pgid;
+		pg->len = n;
+		for (j = 0; j < n; j++)
+			pg->osds[j] = ceph_decode_32(p);
+
+		err = __insert_pg_mapping(pg, &map->pg_temp);
+		if (err)
+			goto bad;
+		dout(" added pg_temp %llx len %d\n", *(u64 *)&pgid, len);
+	}
+
+	/* crush */
+	ceph_decode_32_safe(p, end, len, bad);
+	dout("osdmap_decode crush len %d from off 0x%x\n", len,
+	     (int)(*p - start));
+	ceph_decode_need(p, end, len, bad);
+	map->crush = crush_decode(*p, end);
+	*p += len;
+	if (IS_ERR(map->crush)) {
+		err = PTR_ERR(map->crush);
+		map->crush = NULL;
+		goto bad;
+	}
+
+	/* ignore the rest of the map */
+	*p = end;
+
+	dout("osdmap_decode done %p %p\n", *p, end);
+	return map;
+
+bad:
+	dout("osdmap_decode fail\n");
+	ceph_osdmap_destroy(map);
+	return ERR_PTR(err);
+}
+
+/*
+ * decode and apply an incremental map update.
+ */
+struct ceph_osdmap *osdmap_apply_incremental(void **p, void *end,
+					     struct ceph_osdmap *map,
+					     struct ceph_messenger *msgr)
+{
+	struct crush_map *newcrush = NULL;
+	struct ceph_fsid fsid;
+	u32 epoch = 0;
+	struct ceph_timespec modified;
+	u32 len, pool;
+	__s32 new_pool_max, new_flags, max;
+	void *start = *p;
+	int err = -EINVAL;
+	u16 version;
+	struct rb_node *rbp;
+
+	ceph_decode_16_safe(p, end, version, bad);
+	if (version > CEPH_OSDMAP_INC_VERSION) {
+		pr_warning("got unknown v %d > %d of inc osdmap\n", version,
+			   CEPH_OSDMAP_INC_VERSION);
+		goto bad;
+	}
+
+	ceph_decode_need(p, end, sizeof(fsid)+sizeof(modified)+2*sizeof(u32),
+			 bad);
+	ceph_decode_copy(p, &fsid, sizeof(fsid));
+	epoch = ceph_decode_32(p);
+	BUG_ON(epoch != map->epoch+1);
+	ceph_decode_copy(p, &modified, sizeof(modified));
+	new_pool_max = ceph_decode_32(p);
+	new_flags = ceph_decode_32(p);
+
+	/* full map? */
+	ceph_decode_32_safe(p, end, len, bad);
+	if (len > 0) {
+		dout("apply_incremental full map len %d, %p to %p\n",
+		     len, *p, end);
+		return osdmap_decode(p, min(*p+len, end));
+	}
+
+	/* new crush? */
+	ceph_decode_32_safe(p, end, len, bad);
+	if (len > 0) {
+		dout("apply_incremental new crush map len %d, %p to %p\n",
+		     len, *p, end);
+		newcrush = crush_decode(*p, min(*p+len, end));
+		if (IS_ERR(newcrush))
+			return ERR_PTR(PTR_ERR(newcrush));
+	}
+
+	/* new flags? */
+	if (new_flags >= 0)
+		map->flags = new_flags;
+	if (new_pool_max >= 0)
+		map->pool_max = new_pool_max;
+
+	ceph_decode_need(p, end, 5*sizeof(u32), bad);
+
+	/* new max? */
+	max = ceph_decode_32(p);
+	if (max >= 0) {
+		err = osdmap_set_max_osd(map, max);
+		if (err < 0)
+			goto bad;
+	}
+
+	map->epoch++;
+	map->modified = map->modified;
+	if (newcrush) {
+		if (map->crush)
+			crush_destroy(map->crush);
+		map->crush = newcrush;
+		newcrush = NULL;
+	}
+
+	/* new_pool */
+	ceph_decode_32_safe(p, end, len, bad);
+	while (len--) {
+		__u8 ev;
+		struct ceph_pg_pool_info *pi;
+
+		ceph_decode_32_safe(p, end, pool, bad);
+		ceph_decode_need(p, end, 1 + sizeof(pi->v), bad);
+		ev = ceph_decode_8(p);  /* encoding version */
+		if (ev > CEPH_PG_POOL_VERSION) {
+			pr_warning("got unknown v %d > %d of ceph_pg_pool\n",
+				   ev, CEPH_PG_POOL_VERSION);
+			goto bad;
+		}
+		pi = __lookup_pg_pool(&map->pg_pools, pool);
+		if (!pi) {
+			pi = kmalloc(sizeof(*pi), GFP_NOFS);
+			if (!pi) {
+				err = -ENOMEM;
+				goto bad;
+			}
+			pi->id = pool;
+			__insert_pg_pool(&map->pg_pools, pi);
+		}
+		ceph_decode_copy(p, &pi->v, sizeof(pi->v));
+		calc_pg_masks(pi);
+	}
+
+	/* old_pool */
+	ceph_decode_32_safe(p, end, len, bad);
+	while (len--) {
+		struct ceph_pg_pool_info *pi;
+
+		ceph_decode_32_safe(p, end, pool, bad);
+		pi = __lookup_pg_pool(&map->pg_pools, pool);
+		if (pi) {
+			rb_erase(&pi->node, &map->pg_pools);
+			kfree(pi);
+		}
+	}
+
+	/* new_up */
+	err = -EINVAL;
+	ceph_decode_32_safe(p, end, len, bad);
+	while (len--) {
+		u32 osd;
+		struct ceph_entity_addr addr;
+		ceph_decode_32_safe(p, end, osd, bad);
+		ceph_decode_copy_safe(p, end, &addr, sizeof(addr), bad);
+		ceph_decode_addr(&addr);
+		pr_info("osd%d up\n", osd);
+		BUG_ON(osd >= map->max_osd);
+		map->osd_state[osd] |= CEPH_OSD_UP;
+		map->osd_addr[osd] = addr;
+	}
+
+	/* new_down */
+	ceph_decode_32_safe(p, end, len, bad);
+	while (len--) {
+		u32 osd;
+		ceph_decode_32_safe(p, end, osd, bad);
+		(*p)++;  /* clean flag */
+		pr_info("osd%d down\n", osd);
+		if (osd < map->max_osd)
+			map->osd_state[osd] &= ~CEPH_OSD_UP;
+	}
+
+	/* new_weight */
+	ceph_decode_32_safe(p, end, len, bad);
+	while (len--) {
+		u32 osd, off;
+		ceph_decode_need(p, end, sizeof(u32)*2, bad);
+		osd = ceph_decode_32(p);
+		off = ceph_decode_32(p);
+		pr_info("osd%d weight 0x%x %s\n", osd, off,
+		     off == CEPH_OSD_IN ? "(in)" :
+		     (off == CEPH_OSD_OUT ? "(out)" : ""));
+		if (osd < map->max_osd)
+			map->osd_weight[osd] = off;
+	}
+
+	/* new_pg_temp */
+	rbp = rb_first(&map->pg_temp);
+	ceph_decode_32_safe(p, end, len, bad);
+	while (len--) {
+		struct ceph_pg_mapping *pg;
+		int j;
+		struct ceph_pg pgid;
+		u32 pglen;
+		ceph_decode_need(p, end, sizeof(u64) + sizeof(u32), bad);
+		ceph_decode_copy(p, &pgid, sizeof(pgid));
+		pglen = ceph_decode_32(p);
+
+		/* remove any? */
+		while (rbp && pgid_cmp(rb_entry(rbp, struct ceph_pg_mapping,
+						node)->pgid, pgid) <= 0) {
+			struct rb_node *cur = rbp;
+			rbp = rb_next(rbp);
+			dout(" removed pg_temp %llx\n",
+			     *(u64 *)&rb_entry(cur, struct ceph_pg_mapping,
+					       node)->pgid);
+			rb_erase(cur, &map->pg_temp);
+		}
+
+		if (pglen) {
+			/* insert */
+			ceph_decode_need(p, end, pglen*sizeof(u32), bad);
+			pg = kmalloc(sizeof(*pg) + sizeof(u32)*pglen, GFP_NOFS);
+			if (!pg) {
+				err = -ENOMEM;
+				goto bad;
+			}
+			pg->pgid = pgid;
+			pg->len = pglen;
+			for (j = 0; j < pglen; j++)
+				pg->osds[j] = ceph_decode_32(p);
+			err = __insert_pg_mapping(pg, &map->pg_temp);
+			if (err)
+				goto bad;
+			dout(" added pg_temp %llx len %d\n", *(u64 *)&pgid,
+			     pglen);
+		}
+	}
+	while (rbp) {
+		struct rb_node *cur = rbp;
+		rbp = rb_next(rbp);
+		dout(" removed pg_temp %llx\n",
+		     *(u64 *)&rb_entry(cur, struct ceph_pg_mapping,
+				       node)->pgid);
+		rb_erase(cur, &map->pg_temp);
+	}
+
+	/* ignore the rest */
+	*p = end;
+	return map;
+
+bad:
+	pr_err("corrupt inc osdmap epoch %d off %d (%p of %p-%p)\n",
+	       epoch, (int)(*p - start), *p, start, end);
+	print_hex_dump(KERN_DEBUG, "osdmap: ",
+		       DUMP_PREFIX_OFFSET, 16, 1,
+		       start, end - start, true);
+	if (newcrush)
+		crush_destroy(newcrush);
+	return ERR_PTR(err);
+}
+
+
+
+
+/*
+ * calculate file layout from given offset, length.
+ * fill in correct oid, logical length, and object extent
+ * offset, length.
+ *
+ * for now, we write only a single su, until we can
+ * pass a stride back to the caller.
+ */
+void ceph_calc_file_object_mapping(struct ceph_file_layout *layout,
+				   u64 off, u64 *plen,
+				   u64 *ono,
+				   u64 *oxoff, u64 *oxlen)
+{
+	u32 osize = le32_to_cpu(layout->fl_object_size);
+	u32 su = le32_to_cpu(layout->fl_stripe_unit);
+	u32 sc = le32_to_cpu(layout->fl_stripe_count);
+	u32 bl, stripeno, stripepos, objsetno;
+	u32 su_per_object;
+	u64 t, su_offset;
+
+	dout("mapping %llu~%llu  osize %u fl_su %u\n", off, *plen,
+	     osize, su);
+	su_per_object = osize / su;
+	dout("osize %u / su %u = su_per_object %u\n", osize, su,
+	     su_per_object);
+
+	BUG_ON((su & ~PAGE_MASK) != 0);
+	/* bl = *off / su; */
+	t = off;
+	do_div(t, su);
+	bl = t;
+	dout("off %llu / su %u = bl %u\n", off, su, bl);
+
+	stripeno = bl / sc;
+	stripepos = bl % sc;
+	objsetno = stripeno / su_per_object;
+
+	*ono = objsetno * sc + stripepos;
+	dout("objset %u * sc %u = ono %u\n", objsetno, sc, (unsigned)*ono);
+
+	/* *oxoff = *off % layout->fl_stripe_unit;  # offset in su */
+	t = off;
+	su_offset = do_div(t, su);
+	*oxoff = su_offset + (stripeno % su_per_object) * su;
+
+	/*
+	 * Calculate the length of the extent being written to the selected
+	 * object. This is the minimum of the full length requested (plen) or
+	 * the remainder of the current stripe being written to.
+	 */
+	*oxlen = min_t(u64, *plen, su - su_offset);
+	*plen = *oxlen;
+
+	dout(" obj extent %llu~%llu\n", *oxoff, *oxlen);
+}
+
+/*
+ * calculate an object layout (i.e. pgid) from an oid,
+ * file_layout, and osdmap
+ */
+int ceph_calc_object_layout(struct ceph_object_layout *ol,
+			    const char *oid,
+			    struct ceph_file_layout *fl,
+			    struct ceph_osdmap *osdmap)
+{
+	unsigned num, num_mask;
+	struct ceph_pg pgid;
+	s32 preferred = (s32)le32_to_cpu(fl->fl_pg_preferred);
+	int poolid = le32_to_cpu(fl->fl_pg_pool);
+	struct ceph_pg_pool_info *pool;
+	unsigned ps;
+
+	BUG_ON(!osdmap);
+
+	pool = __lookup_pg_pool(&osdmap->pg_pools, poolid);
+	if (!pool)
+		return -EIO;
+	ps = ceph_str_hash(pool->v.object_hash, oid, strlen(oid));
+	if (preferred >= 0) {
+		ps += preferred;
+		num = le32_to_cpu(pool->v.lpg_num);
+		num_mask = pool->lpg_num_mask;
+	} else {
+		num = le32_to_cpu(pool->v.pg_num);
+		num_mask = pool->pg_num_mask;
+	}
+
+	pgid.ps = cpu_to_le16(ps);
+	pgid.preferred = cpu_to_le16(preferred);
+	pgid.pool = fl->fl_pg_pool;
+	if (preferred >= 0)
+		dout("calc_object_layout '%s' pgid %d.%xp%d\n", oid, poolid, ps,
+		     (int)preferred);
+	else
+		dout("calc_object_layout '%s' pgid %d.%x\n", oid, poolid, ps);
+
+	ol->ol_pgid = pgid;
+	ol->ol_stripe_unit = fl->fl_object_stripe_unit;
+	return 0;
+}
+
+/*
+ * Calculate raw osd vector for the given pgid.  Return pointer to osd
+ * array, or NULL on failure.
+ */
+static int *calc_pg_raw(struct ceph_osdmap *osdmap, struct ceph_pg pgid,
+			int *osds, int *num)
+{
+	struct ceph_pg_mapping *pg;
+	struct ceph_pg_pool_info *pool;
+	int ruleno;
+	unsigned poolid, ps, pps;
+	int preferred;
+
+	/* pg_temp? */
+	pg = __lookup_pg_mapping(&osdmap->pg_temp, pgid);
+	if (pg) {
+		*num = pg->len;
+		return pg->osds;
+	}
+
+	/* crush */
+	poolid = le32_to_cpu(pgid.pool);
+	ps = le16_to_cpu(pgid.ps);
+	preferred = (s16)le16_to_cpu(pgid.preferred);
+
+	/* don't forcefeed bad device ids to crush */
+	if (preferred >= osdmap->max_osd ||
+	    preferred >= osdmap->crush->max_devices)
+		preferred = -1;
+
+	pool = __lookup_pg_pool(&osdmap->pg_pools, poolid);
+	if (!pool)
+		return NULL;
+	ruleno = crush_find_rule(osdmap->crush, pool->v.crush_ruleset,
+				 pool->v.type, pool->v.size);
+	if (ruleno < 0) {
+		pr_err("no crush rule pool %d type %d size %d\n",
+		       poolid, pool->v.type, pool->v.size);
+		return NULL;
+	}
+
+	if (preferred >= 0)
+		pps = ceph_stable_mod(ps,
+				      le32_to_cpu(pool->v.lpgp_num),
+				      pool->lpgp_num_mask);
+	else
+		pps = ceph_stable_mod(ps,
+				      le32_to_cpu(pool->v.pgp_num),
+				      pool->pgp_num_mask);
+	pps += poolid;
+	*num = crush_do_rule(osdmap->crush, ruleno, pps, osds,
+			     min_t(int, pool->v.size, *num),
+			     preferred, osdmap->osd_weight);
+	return osds;
+}
+
+/*
+ * Return primary osd for given pgid, or -1 if none.
+ */
+int ceph_calc_pg_primary(struct ceph_osdmap *osdmap, struct ceph_pg pgid)
+{
+	int rawosds[10], *osds;
+	int i, num = ARRAY_SIZE(rawosds);
+
+	osds = calc_pg_raw(osdmap, pgid, rawosds, &num);
+	if (!osds)
+		return -1;
+
+	/* primary is first up osd */
+	for (i = 0; i < num; i++)
+		if (ceph_osd_is_up(osdmap, osds[i])) {
+			return osds[i];
+			break;
+		}
+	return -1;
+}
diff --git a/fs/ceph/osdmap.h b/fs/ceph/osdmap.h
new file mode 100644
index 000000000000..1fb55afb2642
--- /dev/null
+++ b/fs/ceph/osdmap.h
@@ -0,0 +1,125 @@
+#ifndef _FS_CEPH_OSDMAP_H
+#define _FS_CEPH_OSDMAP_H
+
+#include <linux/rbtree.h>
+#include "types.h"
+#include "ceph_fs.h"
+#include "crush/crush.h"
+
+/*
+ * The osd map describes the current membership of the osd cluster and
+ * specifies the mapping of objects to placement groups and placement
+ * groups to (sets of) osds.  That is, it completely specifies the
+ * (desired) distribution of all data objects in the system at some
+ * point in time.
+ *
+ * Each map version is identified by an epoch, which increases monotonically.
+ *
+ * The map can be updated either via an incremental map (diff) describing
+ * the change between two successive epochs, or as a fully encoded map.
+ */
+struct ceph_pg_pool_info {
+	struct rb_node node;
+	int id;
+	struct ceph_pg_pool v;
+	int pg_num_mask, pgp_num_mask, lpg_num_mask, lpgp_num_mask;
+};
+
+struct ceph_pg_mapping {
+	struct rb_node node;
+	struct ceph_pg pgid;
+	int len;
+	int osds[];
+};
+
+struct ceph_osdmap {
+	struct ceph_fsid fsid;
+	u32 epoch;
+	u32 mkfs_epoch;
+	struct ceph_timespec created, modified;
+
+	u32 flags;         /* CEPH_OSDMAP_* */
+
+	u32 max_osd;       /* size of osd_state, _offload, _addr arrays */
+	u8 *osd_state;     /* CEPH_OSD_* */
+	u32 *osd_weight;   /* 0 = failed, 0x10000 = 100% normal */
+	struct ceph_entity_addr *osd_addr;
+
+	struct rb_root pg_temp;
+	struct rb_root pg_pools;
+	u32 pool_max;
+
+	/* the CRUSH map specifies the mapping of placement groups to
+	 * the list of osds that store+replicate them. */
+	struct crush_map *crush;
+};
+
+/*
+ * file layout helpers
+ */
+#define ceph_file_layout_su(l) ((__s32)le32_to_cpu((l).fl_stripe_unit))
+#define ceph_file_layout_stripe_count(l) \
+	((__s32)le32_to_cpu((l).fl_stripe_count))
+#define ceph_file_layout_object_size(l) ((__s32)le32_to_cpu((l).fl_object_size))
+#define ceph_file_layout_cas_hash(l) ((__s32)le32_to_cpu((l).fl_cas_hash))
+#define ceph_file_layout_object_su(l) \
+	((__s32)le32_to_cpu((l).fl_object_stripe_unit))
+#define ceph_file_layout_pg_preferred(l) \
+	((__s32)le32_to_cpu((l).fl_pg_preferred))
+#define ceph_file_layout_pg_pool(l) \
+	((__s32)le32_to_cpu((l).fl_pg_pool))
+
+static inline unsigned ceph_file_layout_stripe_width(struct ceph_file_layout *l)
+{
+	return le32_to_cpu(l->fl_stripe_unit) *
+		le32_to_cpu(l->fl_stripe_count);
+}
+
+/* "period" == bytes before i start on a new set of objects */
+static inline unsigned ceph_file_layout_period(struct ceph_file_layout *l)
+{
+	return le32_to_cpu(l->fl_object_size) *
+		le32_to_cpu(l->fl_stripe_count);
+}
+
+
+static inline int ceph_osd_is_up(struct ceph_osdmap *map, int osd)
+{
+	return (osd < map->max_osd) && (map->osd_state[osd] & CEPH_OSD_UP);
+}
+
+static inline bool ceph_osdmap_flag(struct ceph_osdmap *map, int flag)
+{
+	return map && (map->flags & flag);
+}
+
+extern char *ceph_osdmap_state_str(char *str, int len, int state);
+
+static inline struct ceph_entity_addr *ceph_osd_addr(struct ceph_osdmap *map,
+						     int osd)
+{
+	if (osd >= map->max_osd)
+		return NULL;
+	return &map->osd_addr[osd];
+}
+
+extern struct ceph_osdmap *osdmap_decode(void **p, void *end);
+extern struct ceph_osdmap *osdmap_apply_incremental(void **p, void *end,
+					    struct ceph_osdmap *map,
+					    struct ceph_messenger *msgr);
+extern void ceph_osdmap_destroy(struct ceph_osdmap *map);
+
+/* calculate mapping of a file extent to an object */
+extern void ceph_calc_file_object_mapping(struct ceph_file_layout *layout,
+					  u64 off, u64 *plen,
+					  u64 *bno, u64 *oxoff, u64 *oxlen);
+
+/* calculate mapping of object to a placement group */
+extern int ceph_calc_object_layout(struct ceph_object_layout *ol,
+				   const char *oid,
+				   struct ceph_file_layout *fl,
+				   struct ceph_osdmap *osdmap);
+extern int ceph_calc_pg_primary(struct ceph_osdmap *osdmap,
+				struct ceph_pg pgid);
+
+#endif
diff --git a/fs/ceph/pagelist.c b/fs/ceph/pagelist.c
new file mode 100644
index 000000000000..370e93695474
--- /dev/null
+++ b/fs/ceph/pagelist.c
@@ -0,0 +1,54 @@
+
+#include <linux/pagemap.h>
+#include <linux/highmem.h>
+
+#include "pagelist.h"
+
+int ceph_pagelist_release(struct ceph_pagelist *pl)
+{
+	if (pl->mapped_tail)
+		kunmap(pl->mapped_tail);
+	while (!list_empty(&pl->head)) {
+		struct page *page = list_first_entry(&pl->head, struct page,
+						     lru);
+		list_del(&page->lru);
+		__free_page(page);
+	}
+	return 0;
+}
+
+static int ceph_pagelist_addpage(struct ceph_pagelist *pl)
+{
+	struct page *page = alloc_page(GFP_NOFS);
+	if (!page)
+		return -ENOMEM;
+	pl->room += PAGE_SIZE;
+	list_add_tail(&page->lru, &pl->head);
+	if (pl->mapped_tail)
+		kunmap(pl->mapped_tail);
+	pl->mapped_tail = kmap(page);
+	return 0;
+}
+
+int ceph_pagelist_append(struct ceph_pagelist *pl, void *buf, size_t len)
+{
+	while (pl->room < len) {
+		size_t bit = pl->room;
+		int ret;
+
+		memcpy(pl->mapped_tail + (pl->length & ~PAGE_CACHE_MASK),
+		       buf, bit);
+		pl->length += bit;
+		pl->room -= bit;
+		buf += bit;
+		len -= bit;
+		ret = ceph_pagelist_addpage(pl);
+		if (ret)
+			return ret;
+	}
+
+	memcpy(pl->mapped_tail + (pl->length & ~PAGE_CACHE_MASK), buf, len);
+	pl->length += len;
+	pl->room -= len;
+	return 0;
+}
diff --git a/fs/ceph/pagelist.h b/fs/ceph/pagelist.h
new file mode 100644
index 000000000000..e8a4187e1087
--- /dev/null
+++ b/fs/ceph/pagelist.h
@@ -0,0 +1,54 @@
+#ifndef __FS_CEPH_PAGELIST_H
+#define __FS_CEPH_PAGELIST_H
+
+#include <linux/list.h>
+
+struct ceph_pagelist {
+	struct list_head head;
+	void *mapped_tail;
+	size_t length;
+	size_t room;
+};
+
+static inline void ceph_pagelist_init(struct ceph_pagelist *pl)
+{
+	INIT_LIST_HEAD(&pl->head);
+	pl->mapped_tail = NULL;
+	pl->length = 0;
+	pl->room = 0;
+}
+extern int ceph_pagelist_release(struct ceph_pagelist *pl);
+
+extern int ceph_pagelist_append(struct ceph_pagelist *pl, void *d, size_t l);
+
+static inline int ceph_pagelist_encode_64(struct ceph_pagelist *pl, u64 v)
+{
+	__le64 ev = cpu_to_le64(v);
+	return ceph_pagelist_append(pl, &ev, sizeof(ev));
+}
+static inline int ceph_pagelist_encode_32(struct ceph_pagelist *pl, u32 v)
+{
+	__le32 ev = cpu_to_le32(v);
+	return ceph_pagelist_append(pl, &ev, sizeof(ev));
+}
+static inline int ceph_pagelist_encode_16(struct ceph_pagelist *pl, u16 v)
+{
+	__le16 ev = cpu_to_le16(v);
+	return ceph_pagelist_append(pl, &ev, sizeof(ev));
+}
+static inline int ceph_pagelist_encode_8(struct ceph_pagelist *pl, u8 v)
+{
+	return ceph_pagelist_append(pl, &v, 1);
+}
+static inline int ceph_pagelist_encode_string(struct ceph_pagelist *pl,
+					      char *s, size_t len)
+{
+	int ret = ceph_pagelist_encode_32(pl, len);
+	if (ret)
+		return ret;
+	if (len)
+		return ceph_pagelist_append(pl, s, len);
+	return 0;
+}
+
+#endif
diff --git a/fs/ceph/rados.h b/fs/ceph/rados.h
new file mode 100644
index 000000000000..26ac8b89a676
--- /dev/null
+++ b/fs/ceph/rados.h
@@ -0,0 +1,374 @@
+#ifndef __RADOS_H
+#define __RADOS_H
+
+/*
+ * Data types for the Ceph distributed object storage layer RADOS
+ * (Reliable Autonomic Distributed Object Store).
+ */
+
+#include "msgr.h"
+
+/*
+ * osdmap encoding versions
+ */
+#define CEPH_OSDMAP_INC_VERSION 4
+#define CEPH_OSDMAP_VERSION     4
+
+/*
+ * fs id
+ */
+struct ceph_fsid {
+	unsigned char fsid[16];
+};
+
+static inline int ceph_fsid_compare(const struct ceph_fsid *a,
+				    const struct ceph_fsid *b)
+{
+	return memcmp(a, b, sizeof(*a));
+}
+
+/*
+ * ino, object, etc.
+ */
+typedef __le64 ceph_snapid_t;
+#define CEPH_SNAPDIR ((__u64)(-1))  /* reserved for hidden .snap dir */
+#define CEPH_NOSNAP  ((__u64)(-2))  /* "head", "live" revision */
+#define CEPH_MAXSNAP ((__u64)(-3))  /* largest valid snapid */
+
+struct ceph_timespec {
+	__le32 tv_sec;
+	__le32 tv_nsec;
+} __attribute__ ((packed));
+
+
+/*
+ * object layout - how objects are mapped into PGs
+ */
+#define CEPH_OBJECT_LAYOUT_HASH     1
+#define CEPH_OBJECT_LAYOUT_LINEAR   2
+#define CEPH_OBJECT_LAYOUT_HASHINO  3
+
+/*
+ * pg layout -- how PGs are mapped onto (sets of) OSDs
+ */
+#define CEPH_PG_LAYOUT_CRUSH  0
+#define CEPH_PG_LAYOUT_HASH   1
+#define CEPH_PG_LAYOUT_LINEAR 2
+#define CEPH_PG_LAYOUT_HYBRID 3
+
+
+/*
+ * placement group.
+ * we encode this into one __le64.
+ */
+struct ceph_pg {
+	__le16 preferred; /* preferred primary osd */
+	__le16 ps;        /* placement seed */
+	__le32 pool;      /* object pool */
+} __attribute__ ((packed));
+
+/*
+ * pg_pool is a set of pgs storing a pool of objects
+ *
+ *  pg_num -- base number of pseudorandomly placed pgs
+ *
+ *  pgp_num -- effective number when calculating pg placement.  this
+ * is used for pg_num increases.  new pgs result in data being "split"
+ * into new pgs.  for this to proceed smoothly, new pgs are intiially
+ * colocated with their parents; that is, pgp_num doesn't increase
+ * until the new pgs have successfully split.  only _then_ are the new
+ * pgs placed independently.
+ *
+ *  lpg_num -- localized pg count (per device).  replicas are randomly
+ * selected.
+ *
+ *  lpgp_num -- as above.
+ */
+#define CEPH_PG_TYPE_REP     1
+#define CEPH_PG_TYPE_RAID4   2
+#define CEPH_PG_POOL_VERSION 2
+struct ceph_pg_pool {
+	__u8 type;                /* CEPH_PG_TYPE_* */
+	__u8 size;                /* number of osds in each pg */
+	__u8 crush_ruleset;       /* crush placement rule */
+	__u8 object_hash;         /* hash mapping object name to ps */
+	__le32 pg_num, pgp_num;   /* number of pg's */
+	__le32 lpg_num, lpgp_num; /* number of localized pg's */
+	__le32 last_change;       /* most recent epoch changed */
+	__le64 snap_seq;          /* seq for per-pool snapshot */
+	__le32 snap_epoch;        /* epoch of last snap */
+	__le32 num_snaps;
+	__le32 num_removed_snap_intervals;
+	__le64 uid;
+} __attribute__ ((packed));
+
+/*
+ * stable_mod func is used to control number of placement groups.
+ * similar to straight-up modulo, but produces a stable mapping as b
+ * increases over time.  b is the number of bins, and bmask is the
+ * containing power of 2 minus 1.
+ *
+ * b <= bmask and bmask=(2**n)-1
+ * e.g., b=12 -> bmask=15, b=123 -> bmask=127
+ */
+static inline int ceph_stable_mod(int x, int b, int bmask)
+{
+	if ((x & bmask) < b)
+		return x & bmask;
+	else
+		return x & (bmask >> 1);
+}
+
+/*
+ * object layout - how a given object should be stored.
+ */
+struct ceph_object_layout {
+	struct ceph_pg ol_pgid;   /* raw pg, with _full_ ps precision. */
+	__le32 ol_stripe_unit;    /* for per-object parity, if any */
+} __attribute__ ((packed));
+
+/*
+ * compound epoch+version, used by storage layer to serialize mutations
+ */
+struct ceph_eversion {
+	__le32 epoch;
+	__le64 version;
+} __attribute__ ((packed));
+
+/*
+ * osd map bits
+ */
+
+/* status bits */
+#define CEPH_OSD_EXISTS 1
+#define CEPH_OSD_UP     2
+
+/* osd weights.  fixed point value: 0x10000 == 1.0 ("in"), 0 == "out" */
+#define CEPH_OSD_IN  0x10000
+#define CEPH_OSD_OUT 0
+
+
+/*
+ * osd map flag bits
+ */
+#define CEPH_OSDMAP_NEARFULL (1<<0)  /* sync writes (near ENOSPC) */
+#define CEPH_OSDMAP_FULL     (1<<1)  /* no data writes (ENOSPC) */
+#define CEPH_OSDMAP_PAUSERD  (1<<2)  /* pause all reads */
+#define CEPH_OSDMAP_PAUSEWR  (1<<3)  /* pause all writes */
+#define CEPH_OSDMAP_PAUSEREC (1<<4)  /* pause recovery */
+
+/*
+ * osd ops
+ */
+#define CEPH_OSD_OP_MODE       0xf000
+#define CEPH_OSD_OP_MODE_RD    0x1000
+#define CEPH_OSD_OP_MODE_WR    0x2000
+#define CEPH_OSD_OP_MODE_RMW   0x3000
+#define CEPH_OSD_OP_MODE_SUB   0x4000
+
+#define CEPH_OSD_OP_TYPE       0x0f00
+#define CEPH_OSD_OP_TYPE_LOCK  0x0100
+#define CEPH_OSD_OP_TYPE_DATA  0x0200
+#define CEPH_OSD_OP_TYPE_ATTR  0x0300
+#define CEPH_OSD_OP_TYPE_EXEC  0x0400
+#define CEPH_OSD_OP_TYPE_PG    0x0500
+
+enum {
+	/** data **/
+	/* read */
+	CEPH_OSD_OP_READ      = CEPH_OSD_OP_MODE_RD | CEPH_OSD_OP_TYPE_DATA | 1,
+	CEPH_OSD_OP_STAT      = CEPH_OSD_OP_MODE_RD | CEPH_OSD_OP_TYPE_DATA | 2,
+
+	/* fancy read */
+	CEPH_OSD_OP_MASKTRUNC = CEPH_OSD_OP_MODE_RD | CEPH_OSD_OP_TYPE_DATA | 4,
+
+	/* write */
+	CEPH_OSD_OP_WRITE     = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_DATA | 1,
+	CEPH_OSD_OP_WRITEFULL = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_DATA | 2,
+	CEPH_OSD_OP_TRUNCATE  = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_DATA | 3,
+	CEPH_OSD_OP_ZERO      = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_DATA | 4,
+	CEPH_OSD_OP_DELETE    = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_DATA | 5,
+
+	/* fancy write */
+	CEPH_OSD_OP_APPEND    = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_DATA | 6,
+	CEPH_OSD_OP_STARTSYNC = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_DATA | 7,
+	CEPH_OSD_OP_SETTRUNC  = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_DATA | 8,
+	CEPH_OSD_OP_TRIMTRUNC = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_DATA | 9,
+
+	CEPH_OSD_OP_TMAPUP  = CEPH_OSD_OP_MODE_RMW | CEPH_OSD_OP_TYPE_DATA | 10,
+	CEPH_OSD_OP_TMAPPUT = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_DATA | 11,
+	CEPH_OSD_OP_TMAPGET = CEPH_OSD_OP_MODE_RD | CEPH_OSD_OP_TYPE_DATA | 12,
+
+	CEPH_OSD_OP_CREATE  = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_DATA | 13,
+
+	/** attrs **/
+	/* read */
+	CEPH_OSD_OP_GETXATTR  = CEPH_OSD_OP_MODE_RD | CEPH_OSD_OP_TYPE_ATTR | 1,
+	CEPH_OSD_OP_GETXATTRS = CEPH_OSD_OP_MODE_RD | CEPH_OSD_OP_TYPE_ATTR | 2,
+
+	/* write */
+	CEPH_OSD_OP_SETXATTR  = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_ATTR | 1,
+	CEPH_OSD_OP_SETXATTRS = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_ATTR | 2,
+	CEPH_OSD_OP_RESETXATTRS = CEPH_OSD_OP_MODE_WR|CEPH_OSD_OP_TYPE_ATTR | 3,
+	CEPH_OSD_OP_RMXATTR   = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_ATTR | 4,
+
+	/** subop **/
+	CEPH_OSD_OP_PULL           = CEPH_OSD_OP_MODE_SUB | 1,
+	CEPH_OSD_OP_PUSH           = CEPH_OSD_OP_MODE_SUB | 2,
+	CEPH_OSD_OP_BALANCEREADS   = CEPH_OSD_OP_MODE_SUB | 3,
+	CEPH_OSD_OP_UNBALANCEREADS = CEPH_OSD_OP_MODE_SUB | 4,
+	CEPH_OSD_OP_SCRUB          = CEPH_OSD_OP_MODE_SUB | 5,
+
+	/** lock **/
+	CEPH_OSD_OP_WRLOCK    = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_LOCK | 1,
+	CEPH_OSD_OP_WRUNLOCK  = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_LOCK | 2,
+	CEPH_OSD_OP_RDLOCK    = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_LOCK | 3,
+	CEPH_OSD_OP_RDUNLOCK  = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_LOCK | 4,
+	CEPH_OSD_OP_UPLOCK    = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_LOCK | 5,
+	CEPH_OSD_OP_DNLOCK    = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_LOCK | 6,
+
+	/** exec **/
+	CEPH_OSD_OP_CALL    = CEPH_OSD_OP_MODE_RD | CEPH_OSD_OP_TYPE_EXEC | 1,
+
+	/** pg **/
+	CEPH_OSD_OP_PGLS      = CEPH_OSD_OP_MODE_RD | CEPH_OSD_OP_TYPE_PG | 1,
+};
+
+static inline int ceph_osd_op_type_lock(int op)
+{
+	return (op & CEPH_OSD_OP_TYPE) == CEPH_OSD_OP_TYPE_LOCK;
+}
+static inline int ceph_osd_op_type_data(int op)
+{
+	return (op & CEPH_OSD_OP_TYPE) == CEPH_OSD_OP_TYPE_DATA;
+}
+static inline int ceph_osd_op_type_attr(int op)
+{
+	return (op & CEPH_OSD_OP_TYPE) == CEPH_OSD_OP_TYPE_ATTR;
+}
+static inline int ceph_osd_op_type_exec(int op)
+{
+	return (op & CEPH_OSD_OP_TYPE) == CEPH_OSD_OP_TYPE_EXEC;
+}
+static inline int ceph_osd_op_type_pg(int op)
+{
+	return (op & CEPH_OSD_OP_TYPE) == CEPH_OSD_OP_TYPE_PG;
+}
+
+static inline int ceph_osd_op_mode_subop(int op)
+{
+	return (op & CEPH_OSD_OP_MODE) == CEPH_OSD_OP_MODE_SUB;
+}
+static inline int ceph_osd_op_mode_read(int op)
+{
+	return (op & CEPH_OSD_OP_MODE) == CEPH_OSD_OP_MODE_RD;
+}
+static inline int ceph_osd_op_mode_modify(int op)
+{
+	return (op & CEPH_OSD_OP_MODE) == CEPH_OSD_OP_MODE_WR;
+}
+
+#define CEPH_OSD_TMAP_HDR 'h'
+#define CEPH_OSD_TMAP_SET 's'
+#define CEPH_OSD_TMAP_RM  'r'
+
+extern const char *ceph_osd_op_name(int op);
+
+
+/*
+ * osd op flags
+ *
+ * An op may be READ, WRITE, or READ|WRITE.
+ */
+enum {
+	CEPH_OSD_FLAG_ACK = 1,          /* want (or is) "ack" ack */
+	CEPH_OSD_FLAG_ONNVRAM = 2,      /* want (or is) "onnvram" ack */
+	CEPH_OSD_FLAG_ONDISK = 4,       /* want (or is) "ondisk" ack */
+	CEPH_OSD_FLAG_RETRY = 8,        /* resend attempt */
+	CEPH_OSD_FLAG_READ = 16,        /* op may read */
+	CEPH_OSD_FLAG_WRITE = 32,       /* op may write */
+	CEPH_OSD_FLAG_ORDERSNAP = 64,   /* EOLDSNAP if snapc is out of order */
+	CEPH_OSD_FLAG_PEERSTAT = 128,   /* msg includes osd_peer_stat */
+	CEPH_OSD_FLAG_BALANCE_READS = 256,
+	CEPH_OSD_FLAG_PARALLELEXEC = 512, /* execute op in parallel */
+	CEPH_OSD_FLAG_PGOP = 1024,      /* pg op, no object */
+	CEPH_OSD_FLAG_EXEC = 2048,      /* op may exec */
+};
+
+enum {
+	CEPH_OSD_OP_FLAG_EXCL = 1,      /* EXCL object create */
+};
+
+#define EOLDSNAPC    ERESTART  /* ORDERSNAP flag set; writer has old snapc*/
+#define EBLACKLISTED ESHUTDOWN /* blacklisted */
+
+/*
+ * an individual object operation.  each may be accompanied by some data
+ * payload
+ */
+struct ceph_osd_op {
+	__le16 op;           /* CEPH_OSD_OP_* */
+	__le32 flags;        /* CEPH_OSD_FLAG_* */
+	union {
+		struct {
+			__le64 offset, length;
+			__le64 truncate_size;
+			__le32 truncate_seq;
+		} __attribute__ ((packed)) extent;
+		struct {
+			__le32 name_len;
+			__le32 value_len;
+		} __attribute__ ((packed)) xattr;
+		struct {
+			__u8 class_len;
+			__u8 method_len;
+			__u8 argc;
+			__le32 indata_len;
+		} __attribute__ ((packed)) cls;
+		struct {
+			__le64 cookie, count;
+		} __attribute__ ((packed)) pgls;
+	};
+	__le32 payload_len;
+} __attribute__ ((packed));
+
+/*
+ * osd request message header.  each request may include multiple
+ * ceph_osd_op object operations.
+ */
+struct ceph_osd_request_head {
+	__le32 client_inc;                 /* client incarnation */
+	struct ceph_object_layout layout;  /* pgid */
+	__le32 osdmap_epoch;               /* client's osdmap epoch */
+
+	__le32 flags;
+
+	struct ceph_timespec mtime;        /* for mutations only */
+	struct ceph_eversion reassert_version; /* if we are replaying op */
+
+	__le32 object_len;     /* length of object name */
+
+	__le64 snapid;         /* snapid to read */
+	__le64 snap_seq;       /* writer's snap context */
+	__le32 num_snaps;
+
+	__le16 num_ops;
+	struct ceph_osd_op ops[];  /* followed by ops[], obj, ticket, snaps */
+} __attribute__ ((packed));
+
+struct ceph_osd_reply_head {
+	__le32 client_inc;                /* client incarnation */
+	__le32 flags;
+	struct ceph_object_layout layout;
+	__le32 osdmap_epoch;
+	struct ceph_eversion reassert_version; /* for replaying uncommitted */
+
+	__le32 result;                    /* result code */
+
+	__le32 object_len;                /* length of object name */
+	__le32 num_ops;
+	struct ceph_osd_op ops[0];  /* ops[], object */
+} __attribute__ ((packed));
+
+
+#endif
diff --git a/fs/ceph/snap.c b/fs/ceph/snap.c
new file mode 100644
index 000000000000..bf2a5f3846a4
--- /dev/null
+++ b/fs/ceph/snap.c
@@ -0,0 +1,904 @@
+#include "ceph_debug.h"
+
+#include <linux/sort.h>
+
+#include "super.h"
+#include "decode.h"
+
+/*
+ * Snapshots in ceph are driven in large part by cooperation from the
+ * client.  In contrast to local file systems or file servers that
+ * implement snapshots at a single point in the system, ceph's
+ * distributed access to storage requires clients to help decide
+ * whether a write logically occurs before or after a recently created
+ * snapshot.
+ *
+ * This provides a perfect instantanous client-wide snapshot.  Between
+ * clients, however, snapshots may appear to be applied at slightly
+ * different points in time, depending on delays in delivering the
+ * snapshot notification.
+ *
+ * Snapshots are _not_ file system-wide.  Instead, each snapshot
+ * applies to the subdirectory nested beneath some directory.  This
+ * effectively divides the hierarchy into multiple "realms," where all
+ * of the files contained by each realm share the same set of
+ * snapshots.  An individual realm's snap set contains snapshots
+ * explicitly created on that realm, as well as any snaps in its
+ * parent's snap set _after_ the point at which the parent became it's
+ * parent (due to, say, a rename).  Similarly, snaps from prior parents
+ * during the time intervals during which they were the parent are included.
+ *
+ * The client is spared most of this detail, fortunately... it must only
+ * maintains a hierarchy of realms reflecting the current parent/child
+ * realm relationship, and for each realm has an explicit list of snaps
+ * inherited from prior parents.
+ *
+ * A snap_realm struct is maintained for realms containing every inode
+ * with an open cap in the system.  (The needed snap realm information is
+ * provided by the MDS whenever a cap is issued, i.e., on open.)  A 'seq'
+ * version number is used to ensure that as realm parameters change (new
+ * snapshot, new parent, etc.) the client's realm hierarchy is updated.
+ *
+ * The realm hierarchy drives the generation of a 'snap context' for each
+ * realm, which simply lists the resulting set of snaps for the realm.  This
+ * is attached to any writes sent to OSDs.
+ */
+/*
+ * Unfortunately error handling is a bit mixed here.  If we get a snap
+ * update, but don't have enough memory to update our realm hierarchy,
+ * it's not clear what we can do about it (besides complaining to the
+ * console).
+ */
+
+
+/*
+ * increase ref count for the realm
+ *
+ * caller must hold snap_rwsem for write.
+ */
+void ceph_get_snap_realm(struct ceph_mds_client *mdsc,
+			 struct ceph_snap_realm *realm)
+{
+	dout("get_realm %p %d -> %d\n", realm,
+	     atomic_read(&realm->nref), atomic_read(&realm->nref)+1);
+	/*
+	 * since we _only_ increment realm refs or empty the empty
+	 * list with snap_rwsem held, adjusting the empty list here is
+	 * safe.  we do need to protect against concurrent empty list
+	 * additions, however.
+	 */
+	if (atomic_read(&realm->nref) == 0) {
+		spin_lock(&mdsc->snap_empty_lock);
+		list_del_init(&realm->empty_item);
+		spin_unlock(&mdsc->snap_empty_lock);
+	}
+
+	atomic_inc(&realm->nref);
+}
+
+static void __insert_snap_realm(struct rb_root *root,
+				struct ceph_snap_realm *new)
+{
+	struct rb_node **p = &root->rb_node;
+	struct rb_node *parent = NULL;
+	struct ceph_snap_realm *r = NULL;
+
+	while (*p) {
+		parent = *p;
+		r = rb_entry(parent, struct ceph_snap_realm, node);
+		if (new->ino < r->ino)
+			p = &(*p)->rb_left;
+		else if (new->ino > r->ino)
+			p = &(*p)->rb_right;
+		else
+			BUG();
+	}
+
+	rb_link_node(&new->node, parent, p);
+	rb_insert_color(&new->node, root);
+}
+
+/*
+ * create and get the realm rooted at @ino and bump its ref count.
+ *
+ * caller must hold snap_rwsem for write.
+ */
+static struct ceph_snap_realm *ceph_create_snap_realm(
+	struct ceph_mds_client *mdsc,
+	u64 ino)
+{
+	struct ceph_snap_realm *realm;
+
+	realm = kzalloc(sizeof(*realm), GFP_NOFS);
+	if (!realm)
+		return ERR_PTR(-ENOMEM);
+
+	atomic_set(&realm->nref, 0);    /* tree does not take a ref */
+	realm->ino = ino;
+	INIT_LIST_HEAD(&realm->children);
+	INIT_LIST_HEAD(&realm->child_item);
+	INIT_LIST_HEAD(&realm->empty_item);
+	INIT_LIST_HEAD(&realm->inodes_with_caps);
+	spin_lock_init(&realm->inodes_with_caps_lock);
+	__insert_snap_realm(&mdsc->snap_realms, realm);
+	dout("create_snap_realm %llx %p\n", realm->ino, realm);
+	return realm;
+}
+
+/*
+ * lookup the realm rooted at @ino.
+ *
+ * caller must hold snap_rwsem for write.
+ */
+struct ceph_snap_realm *ceph_lookup_snap_realm(struct ceph_mds_client *mdsc,
+					       u64 ino)
+{
+	struct rb_node *n = mdsc->snap_realms.rb_node;
+	struct ceph_snap_realm *r;
+
+	while (n) {
+		r = rb_entry(n, struct ceph_snap_realm, node);
+		if (ino < r->ino)
+			n = n->rb_left;
+		else if (ino > r->ino)
+			n = n->rb_right;
+		else {
+			dout("lookup_snap_realm %llx %p\n", r->ino, r);
+			return r;
+		}
+	}
+	return NULL;
+}
+
+static void __put_snap_realm(struct ceph_mds_client *mdsc,
+			     struct ceph_snap_realm *realm);
+
+/*
+ * called with snap_rwsem (write)
+ */
+static void __destroy_snap_realm(struct ceph_mds_client *mdsc,
+				 struct ceph_snap_realm *realm)
+{
+	dout("__destroy_snap_realm %p %llx\n", realm, realm->ino);
+
+	rb_erase(&realm->node, &mdsc->snap_realms);
+
+	if (realm->parent) {
+		list_del_init(&realm->child_item);
+		__put_snap_realm(mdsc, realm->parent);
+	}
+
+	kfree(realm->prior_parent_snaps);
+	kfree(realm->snaps);
+	ceph_put_snap_context(realm->cached_context);
+	kfree(realm);
+}
+
+/*
+ * caller holds snap_rwsem (write)
+ */
+static void __put_snap_realm(struct ceph_mds_client *mdsc,
+			     struct ceph_snap_realm *realm)
+{
+	dout("__put_snap_realm %llx %p %d -> %d\n", realm->ino, realm,
+	     atomic_read(&realm->nref), atomic_read(&realm->nref)-1);
+	if (atomic_dec_and_test(&realm->nref))
+		__destroy_snap_realm(mdsc, realm);
+}
+
+/*
+ * caller needn't hold any locks
+ */
+void ceph_put_snap_realm(struct ceph_mds_client *mdsc,
+			 struct ceph_snap_realm *realm)
+{
+	dout("put_snap_realm %llx %p %d -> %d\n", realm->ino, realm,
+	     atomic_read(&realm->nref), atomic_read(&realm->nref)-1);
+	if (!atomic_dec_and_test(&realm->nref))
+		return;
+
+	if (down_write_trylock(&mdsc->snap_rwsem)) {
+		__destroy_snap_realm(mdsc, realm);
+		up_write(&mdsc->snap_rwsem);
+	} else {
+		spin_lock(&mdsc->snap_empty_lock);
+		list_add(&mdsc->snap_empty, &realm->empty_item);
+		spin_unlock(&mdsc->snap_empty_lock);
+	}
+}
+
+/*
+ * Clean up any realms whose ref counts have dropped to zero.  Note
+ * that this does not include realms who were created but not yet
+ * used.
+ *
+ * Called under snap_rwsem (write)
+ */
+static void __cleanup_empty_realms(struct ceph_mds_client *mdsc)
+{
+	struct ceph_snap_realm *realm;
+
+	spin_lock(&mdsc->snap_empty_lock);
+	while (!list_empty(&mdsc->snap_empty)) {
+		realm = list_first_entry(&mdsc->snap_empty,
+				   struct ceph_snap_realm, empty_item);
+		list_del(&realm->empty_item);
+		spin_unlock(&mdsc->snap_empty_lock);
+		__destroy_snap_realm(mdsc, realm);
+		spin_lock(&mdsc->snap_empty_lock);
+	}
+	spin_unlock(&mdsc->snap_empty_lock);
+}
+
+void ceph_cleanup_empty_realms(struct ceph_mds_client *mdsc)
+{
+	down_write(&mdsc->snap_rwsem);
+	__cleanup_empty_realms(mdsc);
+	up_write(&mdsc->snap_rwsem);
+}
+
+/*
+ * adjust the parent realm of a given @realm.  adjust child list, and parent
+ * pointers, and ref counts appropriately.
+ *
+ * return true if parent was changed, 0 if unchanged, <0 on error.
+ *
+ * caller must hold snap_rwsem for write.
+ */
+static int adjust_snap_realm_parent(struct ceph_mds_client *mdsc,
+				    struct ceph_snap_realm *realm,
+				    u64 parentino)
+{
+	struct ceph_snap_realm *parent;
+
+	if (realm->parent_ino == parentino)
+		return 0;
+
+	parent = ceph_lookup_snap_realm(mdsc, parentino);
+	if (!parent) {
+		parent = ceph_create_snap_realm(mdsc, parentino);
+		if (IS_ERR(parent))
+			return PTR_ERR(parent);
+	}
+	dout("adjust_snap_realm_parent %llx %p: %llx %p -> %llx %p\n",
+	     realm->ino, realm, realm->parent_ino, realm->parent,
+	     parentino, parent);
+	if (realm->parent) {
+		list_del_init(&realm->child_item);
+		ceph_put_snap_realm(mdsc, realm->parent);
+	}
+	realm->parent_ino = parentino;
+	realm->parent = parent;
+	ceph_get_snap_realm(mdsc, parent);
+	list_add(&realm->child_item, &parent->children);
+	return 1;
+}
+
+
+static int cmpu64_rev(const void *a, const void *b)
+{
+	if (*(u64 *)a < *(u64 *)b)
+		return 1;
+	if (*(u64 *)a > *(u64 *)b)
+		return -1;
+	return 0;
+}
+
+/*
+ * build the snap context for a given realm.
+ */
+static int build_snap_context(struct ceph_snap_realm *realm)
+{
+	struct ceph_snap_realm *parent = realm->parent;
+	struct ceph_snap_context *snapc;
+	int err = 0;
+	int i;
+	int num = realm->num_prior_parent_snaps + realm->num_snaps;
+
+	/*
+	 * build parent context, if it hasn't been built.
+	 * conservatively estimate that all parent snaps might be
+	 * included by us.
+	 */
+	if (parent) {
+		if (!parent->cached_context) {
+			err = build_snap_context(parent);
+			if (err)
+				goto fail;
+		}
+		num += parent->cached_context->num_snaps;
+	}
+
+	/* do i actually need to update?  not if my context seq
+	   matches realm seq, and my parents' does to.  (this works
+	   because we rebuild_snap_realms() works _downward_ in
+	   hierarchy after each update.) */
+	if (realm->cached_context &&
+	    realm->cached_context->seq <= realm->seq &&
+	    (!parent ||
+	     realm->cached_context->seq <= parent->cached_context->seq)) {
+		dout("build_snap_context %llx %p: %p seq %lld (%d snaps)"
+		     " (unchanged)\n",
+		     realm->ino, realm, realm->cached_context,
+		     realm->cached_context->seq,
+		     realm->cached_context->num_snaps);
+		return 0;
+	}
+
+	/* alloc new snap context */
+	err = -ENOMEM;
+	if (num > ULONG_MAX / sizeof(u64) - sizeof(*snapc))
+		goto fail;
+	snapc = kzalloc(sizeof(*snapc) + num*sizeof(u64), GFP_NOFS);
+	if (!snapc)
+		goto fail;
+	atomic_set(&snapc->nref, 1);
+
+	/* build (reverse sorted) snap vector */
+	num = 0;
+	snapc->seq = realm->seq;
+	if (parent) {
+		/* include any of parent's snaps occuring _after_ my
+		   parent became my parent */
+		for (i = 0; i < parent->cached_context->num_snaps; i++)
+			if (parent->cached_context->snaps[i] >=
+			    realm->parent_since)
+				snapc->snaps[num++] =
+					parent->cached_context->snaps[i];
+		if (parent->cached_context->seq > snapc->seq)
+			snapc->seq = parent->cached_context->seq;
+	}
+	memcpy(snapc->snaps + num, realm->snaps,
+	       sizeof(u64)*realm->num_snaps);
+	num += realm->num_snaps;
+	memcpy(snapc->snaps + num, realm->prior_parent_snaps,
+	       sizeof(u64)*realm->num_prior_parent_snaps);
+	num += realm->num_prior_parent_snaps;
+
+	sort(snapc->snaps, num, sizeof(u64), cmpu64_rev, NULL);
+	snapc->num_snaps = num;
+	dout("build_snap_context %llx %p: %p seq %lld (%d snaps)\n",
+	     realm->ino, realm, snapc, snapc->seq, snapc->num_snaps);
+
+	if (realm->cached_context)
+		ceph_put_snap_context(realm->cached_context);
+	realm->cached_context = snapc;
+	return 0;
+
+fail:
+	/*
+	 * if we fail, clear old (incorrect) cached_context... hopefully
+	 * we'll have better luck building it later
+	 */
+	if (realm->cached_context) {
+		ceph_put_snap_context(realm->cached_context);
+		realm->cached_context = NULL;
+	}
+	pr_err("build_snap_context %llx %p fail %d\n", realm->ino,
+	       realm, err);
+	return err;
+}
+
+/*
+ * rebuild snap context for the given realm and all of its children.
+ */
+static void rebuild_snap_realms(struct ceph_snap_realm *realm)
+{
+	struct ceph_snap_realm *child;
+
+	dout("rebuild_snap_realms %llx %p\n", realm->ino, realm);
+	build_snap_context(realm);
+
+	list_for_each_entry(child, &realm->children, child_item)
+		rebuild_snap_realms(child);
+}
+
+
+/*
+ * helper to allocate and decode an array of snapids.  free prior
+ * instance, if any.
+ */
+static int dup_array(u64 **dst, __le64 *src, int num)
+{
+	int i;
+
+	kfree(*dst);
+	if (num) {
+		*dst = kcalloc(num, sizeof(u64), GFP_NOFS);
+		if (!*dst)
+			return -ENOMEM;
+		for (i = 0; i < num; i++)
+			(*dst)[i] = get_unaligned_le64(src + i);
+	} else {
+		*dst = NULL;
+	}
+	return 0;
+}
+
+
+/*
+ * When a snapshot is applied, the size/mtime inode metadata is queued
+ * in a ceph_cap_snap (one for each snapshot) until writeback
+ * completes and the metadata can be flushed back to the MDS.
+ *
+ * However, if a (sync) write is currently in-progress when we apply
+ * the snapshot, we have to wait until the write succeeds or fails
+ * (and a final size/mtime is known).  In this case the
+ * cap_snap->writing = 1, and is said to be "pending."  When the write
+ * finishes, we __ceph_finish_cap_snap().
+ *
+ * Caller must hold snap_rwsem for read (i.e., the realm topology won't
+ * change).
+ */
+void ceph_queue_cap_snap(struct ceph_inode_info *ci,
+			 struct ceph_snap_context *snapc)
+{
+	struct inode *inode = &ci->vfs_inode;
+	struct ceph_cap_snap *capsnap;
+	int used;
+
+	capsnap = kzalloc(sizeof(*capsnap), GFP_NOFS);
+	if (!capsnap) {
+		pr_err("ENOMEM allocating ceph_cap_snap on %p\n", inode);
+		return;
+	}
+
+	spin_lock(&inode->i_lock);
+	used = __ceph_caps_used(ci);
+	if (__ceph_have_pending_cap_snap(ci)) {
+		/* there is no point in queuing multiple "pending" cap_snaps,
+		   as no new writes are allowed to start when pending, so any
+		   writes in progress now were started before the previous
+		   cap_snap.  lucky us. */
+		dout("queue_cap_snap %p snapc %p seq %llu used %d"
+		     " already pending\n", inode, snapc, snapc->seq, used);
+		kfree(capsnap);
+	} else if (ci->i_wrbuffer_ref_head || (used & CEPH_CAP_FILE_WR)) {
+		igrab(inode);
+
+		atomic_set(&capsnap->nref, 1);
+		capsnap->ci = ci;
+		INIT_LIST_HEAD(&capsnap->ci_item);
+		INIT_LIST_HEAD(&capsnap->flushing_item);
+
+		capsnap->follows = snapc->seq - 1;
+		capsnap->context = ceph_get_snap_context(snapc);
+		capsnap->issued = __ceph_caps_issued(ci, NULL);
+		capsnap->dirty = __ceph_caps_dirty(ci);
+
+		capsnap->mode = inode->i_mode;
+		capsnap->uid = inode->i_uid;
+		capsnap->gid = inode->i_gid;
+
+		/* fixme? */
+		capsnap->xattr_blob = NULL;
+		capsnap->xattr_len = 0;
+
+		/* dirty page count moved from _head to this cap_snap;
+		   all subsequent writes page dirties occur _after_ this
+		   snapshot. */
+		capsnap->dirty_pages = ci->i_wrbuffer_ref_head;
+		ci->i_wrbuffer_ref_head = 0;
+		ceph_put_snap_context(ci->i_head_snapc);
+		ci->i_head_snapc = NULL;
+		list_add_tail(&capsnap->ci_item, &ci->i_cap_snaps);
+
+		if (used & CEPH_CAP_FILE_WR) {
+			dout("queue_cap_snap %p cap_snap %p snapc %p"
+			     " seq %llu used WR, now pending\n", inode,
+			     capsnap, snapc, snapc->seq);
+			capsnap->writing = 1;
+		} else {
+			/* note mtime, size NOW. */
+			__ceph_finish_cap_snap(ci, capsnap);
+		}
+	} else {
+		dout("queue_cap_snap %p nothing dirty|writing\n", inode);
+		kfree(capsnap);
+	}
+
+	spin_unlock(&inode->i_lock);
+}
+
+/*
+ * Finalize the size, mtime for a cap_snap.. that is, settle on final values
+ * to be used for the snapshot, to be flushed back to the mds.
+ *
+ * If capsnap can now be flushed, add to snap_flush list, and return 1.
+ *
+ * Caller must hold i_lock.
+ */
+int __ceph_finish_cap_snap(struct ceph_inode_info *ci,
+			    struct ceph_cap_snap *capsnap)
+{
+	struct inode *inode = &ci->vfs_inode;
+	struct ceph_mds_client *mdsc = &ceph_client(inode->i_sb)->mdsc;
+
+	BUG_ON(capsnap->writing);
+	capsnap->size = inode->i_size;
+	capsnap->mtime = inode->i_mtime;
+	capsnap->atime = inode->i_atime;
+	capsnap->ctime = inode->i_ctime;
+	capsnap->time_warp_seq = ci->i_time_warp_seq;
+	if (capsnap->dirty_pages) {
+		dout("finish_cap_snap %p cap_snap %p snapc %p %llu s=%llu "
+		     "still has %d dirty pages\n", inode, capsnap,
+		     capsnap->context, capsnap->context->seq,
+		     capsnap->size, capsnap->dirty_pages);
+		return 0;
+	}
+	dout("finish_cap_snap %p cap_snap %p snapc %p %llu s=%llu clean\n",
+	     inode, capsnap, capsnap->context,
+	     capsnap->context->seq, capsnap->size);
+
+	spin_lock(&mdsc->snap_flush_lock);
+	list_add_tail(&ci->i_snap_flush_item, &mdsc->snap_flush_list);
+	spin_unlock(&mdsc->snap_flush_lock);
+	return 1;  /* caller may want to ceph_flush_snaps */
+}
+
+
+/*
+ * Parse and apply a snapblob "snap trace" from the MDS.  This specifies
+ * the snap realm parameters from a given realm and all of its ancestors,
+ * up to the root.
+ *
+ * Caller must hold snap_rwsem for write.
+ */
+int ceph_update_snap_trace(struct ceph_mds_client *mdsc,
+			   void *p, void *e, bool deletion)
+{
+	struct ceph_mds_snap_realm *ri;    /* encoded */
+	__le64 *snaps;                     /* encoded */
+	__le64 *prior_parent_snaps;        /* encoded */
+	struct ceph_snap_realm *realm;
+	int invalidate = 0;
+	int err = -ENOMEM;
+
+	dout("update_snap_trace deletion=%d\n", deletion);
+more:
+	ceph_decode_need(&p, e, sizeof(*ri), bad);
+	ri = p;
+	p += sizeof(*ri);
+	ceph_decode_need(&p, e, sizeof(u64)*(le32_to_cpu(ri->num_snaps) +
+			    le32_to_cpu(ri->num_prior_parent_snaps)), bad);
+	snaps = p;
+	p += sizeof(u64) * le32_to_cpu(ri->num_snaps);
+	prior_parent_snaps = p;
+	p += sizeof(u64) * le32_to_cpu(ri->num_prior_parent_snaps);
+
+	realm = ceph_lookup_snap_realm(mdsc, le64_to_cpu(ri->ino));
+	if (!realm) {
+		realm = ceph_create_snap_realm(mdsc, le64_to_cpu(ri->ino));
+		if (IS_ERR(realm)) {
+			err = PTR_ERR(realm);
+			goto fail;
+		}
+	}
+
+	if (le64_to_cpu(ri->seq) > realm->seq) {
+		dout("update_snap_trace updating %llx %p %lld -> %lld\n",
+		     realm->ino, realm, realm->seq, le64_to_cpu(ri->seq));
+		/*
+		 * if the realm seq has changed, queue a cap_snap for every
+		 * inode with open caps.  we do this _before_ we update
+		 * the realm info so that we prepare for writeback under the
+		 * _previous_ snap context.
+		 *
+		 * ...unless it's a snap deletion!
+		 */
+		if (!deletion) {
+			struct ceph_inode_info *ci;
+			struct inode *lastinode = NULL;
+
+			spin_lock(&realm->inodes_with_caps_lock);
+			list_for_each_entry(ci, &realm->inodes_with_caps,
+					    i_snap_realm_item) {
+				struct inode *inode = igrab(&ci->vfs_inode);
+				if (!inode)
+					continue;
+				spin_unlock(&realm->inodes_with_caps_lock);
+				if (lastinode)
+					iput(lastinode);
+				lastinode = inode;
+				ceph_queue_cap_snap(ci, realm->cached_context);
+				spin_lock(&realm->inodes_with_caps_lock);
+			}
+			spin_unlock(&realm->inodes_with_caps_lock);
+			if (lastinode)
+				iput(lastinode);
+			dout("update_snap_trace cap_snaps queued\n");
+		}
+
+	} else {
+		dout("update_snap_trace %llx %p seq %lld unchanged\n",
+		     realm->ino, realm, realm->seq);
+	}
+
+	/* ensure the parent is correct */
+	err = adjust_snap_realm_parent(mdsc, realm, le64_to_cpu(ri->parent));
+	if (err < 0)
+		goto fail;
+	invalidate += err;
+
+	if (le64_to_cpu(ri->seq) > realm->seq) {
+		/* update realm parameters, snap lists */
+		realm->seq = le64_to_cpu(ri->seq);
+		realm->created = le64_to_cpu(ri->created);
+		realm->parent_since = le64_to_cpu(ri->parent_since);
+
+		realm->num_snaps = le32_to_cpu(ri->num_snaps);
+		err = dup_array(&realm->snaps, snaps, realm->num_snaps);
+		if (err < 0)
+			goto fail;
+
+		realm->num_prior_parent_snaps =
+			le32_to_cpu(ri->num_prior_parent_snaps);
+		err = dup_array(&realm->prior_parent_snaps, prior_parent_snaps,
+				realm->num_prior_parent_snaps);
+		if (err < 0)
+			goto fail;
+
+		invalidate = 1;
+	} else if (!realm->cached_context) {
+		invalidate = 1;
+	}
+
+	dout("done with %llx %p, invalidated=%d, %p %p\n", realm->ino,
+	     realm, invalidate, p, e);
+
+	if (p < e)
+		goto more;
+
+	/* invalidate when we reach the _end_ (root) of the trace */
+	if (invalidate)
+		rebuild_snap_realms(realm);
+
+	__cleanup_empty_realms(mdsc);
+	return 0;
+
+bad:
+	err = -EINVAL;
+fail:
+	pr_err("update_snap_trace error %d\n", err);
+	return err;
+}
+
+
+/*
+ * Send any cap_snaps that are queued for flush.  Try to carry
+ * s_mutex across multiple snap flushes to avoid locking overhead.
+ *
+ * Caller holds no locks.
+ */
+static void flush_snaps(struct ceph_mds_client *mdsc)
+{
+	struct ceph_inode_info *ci;
+	struct inode *inode;
+	struct ceph_mds_session *session = NULL;
+
+	dout("flush_snaps\n");
+	spin_lock(&mdsc->snap_flush_lock);
+	while (!list_empty(&mdsc->snap_flush_list)) {
+		ci = list_first_entry(&mdsc->snap_flush_list,
+				struct ceph_inode_info, i_snap_flush_item);
+		inode = &ci->vfs_inode;
+		igrab(inode);
+		spin_unlock(&mdsc->snap_flush_lock);
+		spin_lock(&inode->i_lock);
+		__ceph_flush_snaps(ci, &session);
+		spin_unlock(&inode->i_lock);
+		iput(inode);
+		spin_lock(&mdsc->snap_flush_lock);
+	}
+	spin_unlock(&mdsc->snap_flush_lock);
+
+	if (session) {
+		mutex_unlock(&session->s_mutex);
+		ceph_put_mds_session(session);
+	}
+	dout("flush_snaps done\n");
+}
+
+
+/*
+ * Handle a snap notification from the MDS.
+ *
+ * This can take two basic forms: the simplest is just a snap creation
+ * or deletion notification on an existing realm.  This should update the
+ * realm and its children.
+ *
+ * The more difficult case is realm creation, due to snap creation at a
+ * new point in the file hierarchy, or due to a rename that moves a file or
+ * directory into another realm.
+ */
+void ceph_handle_snap(struct ceph_mds_client *mdsc,
+		      struct ceph_mds_session *session,
+		      struct ceph_msg *msg)
+{
+	struct super_block *sb = mdsc->client->sb;
+	int mds = session->s_mds;
+	u64 split;
+	int op;
+	int trace_len;
+	struct ceph_snap_realm *realm = NULL;
+	void *p = msg->front.iov_base;
+	void *e = p + msg->front.iov_len;
+	struct ceph_mds_snap_head *h;
+	int num_split_inos, num_split_realms;
+	__le64 *split_inos = NULL, *split_realms = NULL;
+	int i;
+	int locked_rwsem = 0;
+
+	/* decode */
+	if (msg->front.iov_len < sizeof(*h))
+		goto bad;
+	h = p;
+	op = le32_to_cpu(h->op);
+	split = le64_to_cpu(h->split);   /* non-zero if we are splitting an
+					  * existing realm */
+	num_split_inos = le32_to_cpu(h->num_split_inos);
+	num_split_realms = le32_to_cpu(h->num_split_realms);
+	trace_len = le32_to_cpu(h->trace_len);
+	p += sizeof(*h);
+
+	dout("handle_snap from mds%d op %s split %llx tracelen %d\n", mds,
+	     ceph_snap_op_name(op), split, trace_len);
+
+	mutex_lock(&session->s_mutex);
+	session->s_seq++;
+	mutex_unlock(&session->s_mutex);
+
+	down_write(&mdsc->snap_rwsem);
+	locked_rwsem = 1;
+
+	if (op == CEPH_SNAP_OP_SPLIT) {
+		struct ceph_mds_snap_realm *ri;
+
+		/*
+		 * A "split" breaks part of an existing realm off into
+		 * a new realm.  The MDS provides a list of inodes
+		 * (with caps) and child realms that belong to the new
+		 * child.
+		 */
+		split_inos = p;
+		p += sizeof(u64) * num_split_inos;
+		split_realms = p;
+		p += sizeof(u64) * num_split_realms;
+		ceph_decode_need(&p, e, sizeof(*ri), bad);
+		/* we will peek at realm info here, but will _not_
+		 * advance p, as the realm update will occur below in
+		 * ceph_update_snap_trace. */
+		ri = p;
+
+		realm = ceph_lookup_snap_realm(mdsc, split);
+		if (!realm) {
+			realm = ceph_create_snap_realm(mdsc, split);
+			if (IS_ERR(realm))
+				goto out;
+		}
+		ceph_get_snap_realm(mdsc, realm);
+
+		dout("splitting snap_realm %llx %p\n", realm->ino, realm);
+		for (i = 0; i < num_split_inos; i++) {
+			struct ceph_vino vino = {
+				.ino = le64_to_cpu(split_inos[i]),
+				.snap = CEPH_NOSNAP,
+			};
+			struct inode *inode = ceph_find_inode(sb, vino);
+			struct ceph_inode_info *ci;
+
+			if (!inode)
+				continue;
+			ci = ceph_inode(inode);
+
+			spin_lock(&inode->i_lock);
+			if (!ci->i_snap_realm)
+				goto skip_inode;
+			/*
+			 * If this inode belongs to a realm that was
+			 * created after our new realm, we experienced
+			 * a race (due to another split notifications
+			 * arriving from a different MDS).  So skip
+			 * this inode.
+			 */
+			if (ci->i_snap_realm->created >
+			    le64_to_cpu(ri->created)) {
+				dout(" leaving %p in newer realm %llx %p\n",
+				     inode, ci->i_snap_realm->ino,
+				     ci->i_snap_realm);
+				goto skip_inode;
+			}
+			dout(" will move %p to split realm %llx %p\n",
+			     inode, realm->ino, realm);
+			/*
+			 * Remove the inode from the realm's inode
+			 * list, but don't add it to the new realm
+			 * yet.  We don't want the cap_snap to be
+			 * queued (again) by ceph_update_snap_trace()
+			 * below.  Queue it _now_, under the old context.
+			 */
+			list_del_init(&ci->i_snap_realm_item);
+			spin_unlock(&inode->i_lock);
+
+			ceph_queue_cap_snap(ci,
+					    ci->i_snap_realm->cached_context);
+
+			iput(inode);
+			continue;
+
+skip_inode:
+			spin_unlock(&inode->i_lock);
+			iput(inode);
+		}
+
+		/* we may have taken some of the old realm's children. */
+		for (i = 0; i < num_split_realms; i++) {
+			struct ceph_snap_realm *child =
+				ceph_lookup_snap_realm(mdsc,
+					   le64_to_cpu(split_realms[i]));
+			if (!child)
+				continue;
+			adjust_snap_realm_parent(mdsc, child, realm->ino);
+		}
+	}
+
+	/*
+	 * update using the provided snap trace. if we are deleting a
+	 * snap, we can avoid queueing cap_snaps.
+	 */
+	ceph_update_snap_trace(mdsc, p, e,
+			       op == CEPH_SNAP_OP_DESTROY);
+
+	if (op == CEPH_SNAP_OP_SPLIT) {
+		/*
+		 * ok, _now_ add the inodes into the new realm.
+		 */
+		for (i = 0; i < num_split_inos; i++) {
+			struct ceph_vino vino = {
+				.ino = le64_to_cpu(split_inos[i]),
+				.snap = CEPH_NOSNAP,
+			};
+			struct inode *inode = ceph_find_inode(sb, vino);
+			struct ceph_inode_info *ci;
+
+			if (!inode)
+				continue;
+			ci = ceph_inode(inode);
+			spin_lock(&inode->i_lock);
+			if (!ci->i_snap_realm)
+				goto split_skip_inode;
+			ceph_put_snap_realm(mdsc, ci->i_snap_realm);
+			spin_lock(&realm->inodes_with_caps_lock);
+			list_add(&ci->i_snap_realm_item,
+				 &realm->inodes_with_caps);
+			ci->i_snap_realm = realm;
+			spin_unlock(&realm->inodes_with_caps_lock);
+			ceph_get_snap_realm(mdsc, realm);
+split_skip_inode:
+			spin_unlock(&inode->i_lock);
+			iput(inode);
+		}
+
+		/* we took a reference when we created the realm, above */
+		ceph_put_snap_realm(mdsc, realm);
+	}
+
+	__cleanup_empty_realms(mdsc);
+
+	up_write(&mdsc->snap_rwsem);
+
+	flush_snaps(mdsc);
+	return;
+
+bad:
+	pr_err("corrupt snap message from mds%d\n", mds);
+	ceph_msg_dump(msg);
+out:
+	if (locked_rwsem)
+		up_write(&mdsc->snap_rwsem);
+	return;
+}
+
+
+
diff --git a/fs/ceph/super.c b/fs/ceph/super.c
new file mode 100644
index 000000000000..4290a6e860b0
--- /dev/null
+++ b/fs/ceph/super.c
@@ -0,0 +1,1030 @@
+
+#include "ceph_debug.h"
+
+#include <linux/backing-dev.h>
+#include <linux/fs.h>
+#include <linux/inet.h>
+#include <linux/in6.h>
+#include <linux/module.h>
+#include <linux/mount.h>
+#include <linux/parser.h>
+#include <linux/rwsem.h>
+#include <linux/sched.h>
+#include <linux/seq_file.h>
+#include <linux/statfs.h>
+#include <linux/string.h>
+#include <linux/version.h>
+#include <linux/vmalloc.h>
+
+#include "decode.h"
+#include "super.h"
+#include "mon_client.h"
+#include "auth.h"
+
+/*
+ * Ceph superblock operations
+ *
+ * Handle the basics of mounting, unmounting.
+ */
+
+
+/*
+ * find filename portion of a path (/foo/bar/baz -> baz)
+ */
+const char *ceph_file_part(const char *s, int len)
+{
+	const char *e = s + len;
+
+	while (e != s && *(e-1) != '/')
+		e--;
+	return e;
+}
+
+
+/*
+ * super ops
+ */
+static void ceph_put_super(struct super_block *s)
+{
+	struct ceph_client *cl = ceph_client(s);
+
+	dout("put_super\n");
+	ceph_mdsc_close_sessions(&cl->mdsc);
+	return;
+}
+
+static int ceph_statfs(struct dentry *dentry, struct kstatfs *buf)
+{
+	struct ceph_client *client = ceph_inode_to_client(dentry->d_inode);
+	struct ceph_monmap *monmap = client->monc.monmap;
+	struct ceph_statfs st;
+	u64 fsid;
+	int err;
+
+	dout("statfs\n");
+	err = ceph_monc_do_statfs(&client->monc, &st);
+	if (err < 0)
+		return err;
+
+	/* fill in kstatfs */
+	buf->f_type = CEPH_SUPER_MAGIC;  /* ?? */
+
+	/*
+	 * express utilization in terms of large blocks to avoid
+	 * overflow on 32-bit machines.
+	 */
+	buf->f_bsize = 1 << CEPH_BLOCK_SHIFT;
+	buf->f_blocks = le64_to_cpu(st.kb) >> (CEPH_BLOCK_SHIFT-10);
+	buf->f_bfree = (le64_to_cpu(st.kb) - le64_to_cpu(st.kb_used)) >>
+		(CEPH_BLOCK_SHIFT-10);
+	buf->f_bavail = le64_to_cpu(st.kb_avail) >> (CEPH_BLOCK_SHIFT-10);
+
+	buf->f_files = le64_to_cpu(st.num_objects);
+	buf->f_ffree = -1;
+	buf->f_namelen = PATH_MAX;
+	buf->f_frsize = PAGE_CACHE_SIZE;
+
+	/* leave fsid little-endian, regardless of host endianness */
+	fsid = *(u64 *)(&monmap->fsid) ^ *((u64 *)&monmap->fsid + 1);
+	buf->f_fsid.val[0] = fsid & 0xffffffff;
+	buf->f_fsid.val[1] = fsid >> 32;
+
+	return 0;
+}
+
+
+static int ceph_syncfs(struct super_block *sb, int wait)
+{
+	dout("sync_fs %d\n", wait);
+	ceph_osdc_sync(&ceph_client(sb)->osdc);
+	ceph_mdsc_sync(&ceph_client(sb)->mdsc);
+	dout("sync_fs %d done\n", wait);
+	return 0;
+}
+
+
+/**
+ * ceph_show_options - Show mount options in /proc/mounts
+ * @m: seq_file to write to
+ * @mnt: mount descriptor
+ */
+static int ceph_show_options(struct seq_file *m, struct vfsmount *mnt)
+{
+	struct ceph_client *client = ceph_sb_to_client(mnt->mnt_sb);
+	struct ceph_mount_args *args = client->mount_args;
+
+	if (args->flags & CEPH_OPT_FSID)
+		seq_printf(m, ",fsidmajor=%llu,fsidminor%llu",
+			   le64_to_cpu(*(__le64 *)&args->fsid.fsid[0]),
+			   le64_to_cpu(*(__le64 *)&args->fsid.fsid[8]));
+	if (args->flags & CEPH_OPT_NOSHARE)
+		seq_puts(m, ",noshare");
+	if (args->flags & CEPH_OPT_DIRSTAT)
+		seq_puts(m, ",dirstat");
+	if ((args->flags & CEPH_OPT_RBYTES) == 0)
+		seq_puts(m, ",norbytes");
+	if (args->flags & CEPH_OPT_NOCRC)
+		seq_puts(m, ",nocrc");
+	if (args->flags & CEPH_OPT_NOASYNCREADDIR)
+		seq_puts(m, ",noasyncreaddir");
+	if (strcmp(args->snapdir_name, CEPH_SNAPDIRNAME_DEFAULT))
+		seq_printf(m, ",snapdirname=%s", args->snapdir_name);
+	if (args->name)
+		seq_printf(m, ",name=%s", args->name);
+	if (args->secret)
+		seq_puts(m, ",secret=<hidden>");
+	return 0;
+}
+
+/*
+ * caches
+ */
+struct kmem_cache *ceph_inode_cachep;
+struct kmem_cache *ceph_cap_cachep;
+struct kmem_cache *ceph_dentry_cachep;
+struct kmem_cache *ceph_file_cachep;
+
+static void ceph_inode_init_once(void *foo)
+{
+	struct ceph_inode_info *ci = foo;
+	inode_init_once(&ci->vfs_inode);
+}
+
+static int default_congestion_kb(void)
+{
+	int congestion_kb;
+
+	/*
+	 * Copied from NFS
+	 *
+	 * congestion size, scale with available memory.
+	 *
+	 *  64MB:    8192k
+	 * 128MB:   11585k
+	 * 256MB:   16384k
+	 * 512MB:   23170k
+	 *   1GB:   32768k
+	 *   2GB:   46340k
+	 *   4GB:   65536k
+	 *   8GB:   92681k
+	 *  16GB:  131072k
+	 *
+	 * This allows larger machines to have larger/more transfers.
+	 * Limit the default to 256M
+	 */
+	congestion_kb = (16*int_sqrt(totalram_pages)) << (PAGE_SHIFT-10);
+	if (congestion_kb > 256*1024)
+		congestion_kb = 256*1024;
+
+	return congestion_kb;
+}
+
+static int __init init_caches(void)
+{
+	ceph_inode_cachep = kmem_cache_create("ceph_inode_info",
+				      sizeof(struct ceph_inode_info),
+				      __alignof__(struct ceph_inode_info),
+				      (SLAB_RECLAIM_ACCOUNT|SLAB_MEM_SPREAD),
+				      ceph_inode_init_once);
+	if (ceph_inode_cachep == NULL)
+		return -ENOMEM;
+
+	ceph_cap_cachep = KMEM_CACHE(ceph_cap,
+				     SLAB_RECLAIM_ACCOUNT|SLAB_MEM_SPREAD);
+	if (ceph_cap_cachep == NULL)
+		goto bad_cap;
+
+	ceph_dentry_cachep = KMEM_CACHE(ceph_dentry_info,
+					SLAB_RECLAIM_ACCOUNT|SLAB_MEM_SPREAD);
+	if (ceph_dentry_cachep == NULL)
+		goto bad_dentry;
+
+	ceph_file_cachep = KMEM_CACHE(ceph_file_info,
+				      SLAB_RECLAIM_ACCOUNT|SLAB_MEM_SPREAD);
+	if (ceph_file_cachep == NULL)
+		goto bad_file;
+
+	return 0;
+
+bad_file:
+	kmem_cache_destroy(ceph_dentry_cachep);
+bad_dentry:
+	kmem_cache_destroy(ceph_cap_cachep);
+bad_cap:
+	kmem_cache_destroy(ceph_inode_cachep);
+	return -ENOMEM;
+}
+
+static void destroy_caches(void)
+{
+	kmem_cache_destroy(ceph_inode_cachep);
+	kmem_cache_destroy(ceph_cap_cachep);
+	kmem_cache_destroy(ceph_dentry_cachep);
+	kmem_cache_destroy(ceph_file_cachep);
+}
+
+
+/*
+ * ceph_umount_begin - initiate forced umount.  Tear down down the
+ * mount, skipping steps that may hang while waiting for server(s).
+ */
+static void ceph_umount_begin(struct super_block *sb)
+{
+	struct ceph_client *client = ceph_sb_to_client(sb);
+
+	dout("ceph_umount_begin - starting forced umount\n");
+	if (!client)
+		return;
+	client->mount_state = CEPH_MOUNT_SHUTDOWN;
+	return;
+}
+
+static const struct super_operations ceph_super_ops = {
+	.alloc_inode	= ceph_alloc_inode,
+	.destroy_inode	= ceph_destroy_inode,
+	.write_inode    = ceph_write_inode,
+	.sync_fs        = ceph_syncfs,
+	.put_super	= ceph_put_super,
+	.show_options   = ceph_show_options,
+	.statfs		= ceph_statfs,
+	.umount_begin   = ceph_umount_begin,
+};
+
+
+const char *ceph_msg_type_name(int type)
+{
+	switch (type) {
+	case CEPH_MSG_SHUTDOWN: return "shutdown";
+	case CEPH_MSG_PING: return "ping";
+	case CEPH_MSG_AUTH: return "auth";
+	case CEPH_MSG_AUTH_REPLY: return "auth_reply";
+	case CEPH_MSG_MON_MAP: return "mon_map";
+	case CEPH_MSG_MON_GET_MAP: return "mon_get_map";
+	case CEPH_MSG_MON_SUBSCRIBE: return "mon_subscribe";
+	case CEPH_MSG_MON_SUBSCRIBE_ACK: return "mon_subscribe_ack";
+	case CEPH_MSG_STATFS: return "statfs";
+	case CEPH_MSG_STATFS_REPLY: return "statfs_reply";
+	case CEPH_MSG_MDS_MAP: return "mds_map";
+	case CEPH_MSG_CLIENT_SESSION: return "client_session";
+	case CEPH_MSG_CLIENT_RECONNECT: return "client_reconnect";
+	case CEPH_MSG_CLIENT_REQUEST: return "client_request";
+	case CEPH_MSG_CLIENT_REQUEST_FORWARD: return "client_request_forward";
+	case CEPH_MSG_CLIENT_REPLY: return "client_reply";
+	case CEPH_MSG_CLIENT_CAPS: return "client_caps";
+	case CEPH_MSG_CLIENT_CAPRELEASE: return "client_cap_release";
+	case CEPH_MSG_CLIENT_SNAP: return "client_snap";
+	case CEPH_MSG_CLIENT_LEASE: return "client_lease";
+	case CEPH_MSG_OSD_MAP: return "osd_map";
+	case CEPH_MSG_OSD_OP: return "osd_op";
+	case CEPH_MSG_OSD_OPREPLY: return "osd_opreply";
+	default: return "unknown";
+	}
+}
+
+
+/*
+ * mount options
+ */
+enum {
+	Opt_fsidmajor,
+	Opt_fsidminor,
+	Opt_monport,
+	Opt_wsize,
+	Opt_rsize,
+	Opt_osdtimeout,
+	Opt_osdkeepalivetimeout,
+	Opt_mount_timeout,
+	Opt_osd_idle_ttl,
+	Opt_caps_wanted_delay_min,
+	Opt_caps_wanted_delay_max,
+	Opt_readdir_max_entries,
+	Opt_congestion_kb,
+	Opt_last_int,
+	/* int args above */
+	Opt_snapdirname,
+	Opt_name,
+	Opt_secret,
+	Opt_last_string,
+	/* string args above */
+	Opt_ip,
+	Opt_noshare,
+	Opt_dirstat,
+	Opt_nodirstat,
+	Opt_rbytes,
+	Opt_norbytes,
+	Opt_nocrc,
+	Opt_noasyncreaddir,
+};
+
+static match_table_t arg_tokens = {
+	{Opt_fsidmajor, "fsidmajor=%ld"},
+	{Opt_fsidminor, "fsidminor=%ld"},
+	{Opt_monport, "monport=%d"},
+	{Opt_wsize, "wsize=%d"},
+	{Opt_rsize, "rsize=%d"},
+	{Opt_osdtimeout, "osdtimeout=%d"},
+	{Opt_osdkeepalivetimeout, "osdkeepalive=%d"},
+	{Opt_mount_timeout, "mount_timeout=%d"},
+	{Opt_osd_idle_ttl, "osd_idle_ttl=%d"},
+	{Opt_caps_wanted_delay_min, "caps_wanted_delay_min=%d"},
+	{Opt_caps_wanted_delay_max, "caps_wanted_delay_max=%d"},
+	{Opt_readdir_max_entries, "readdir_max_entries=%d"},
+	{Opt_congestion_kb, "write_congestion_kb=%d"},
+	/* int args above */
+	{Opt_snapdirname, "snapdirname=%s"},
+	{Opt_name, "name=%s"},
+	{Opt_secret, "secret=%s"},
+	/* string args above */
+	{Opt_ip, "ip=%s"},
+	{Opt_noshare, "noshare"},
+	{Opt_dirstat, "dirstat"},
+	{Opt_nodirstat, "nodirstat"},
+	{Opt_rbytes, "rbytes"},
+	{Opt_norbytes, "norbytes"},
+	{Opt_nocrc, "nocrc"},
+	{Opt_noasyncreaddir, "noasyncreaddir"},
+	{-1, NULL}
+};
+
+
+static struct ceph_mount_args *parse_mount_args(int flags, char *options,
+						const char *dev_name,
+						const char **path)
+{
+	struct ceph_mount_args *args;
+	const char *c;
+	int err = -ENOMEM;
+	substring_t argstr[MAX_OPT_ARGS];
+
+	args = kzalloc(sizeof(*args), GFP_KERNEL);
+	if (!args)
+		return ERR_PTR(-ENOMEM);
+	args->mon_addr = kcalloc(CEPH_MAX_MON, sizeof(*args->mon_addr),
+				 GFP_KERNEL);
+	if (!args->mon_addr)
+		goto out;
+
+	dout("parse_mount_args %p, dev_name '%s'\n", args, dev_name);
+
+	/* start with defaults */
+	args->sb_flags = flags;
+	args->flags = CEPH_OPT_DEFAULT;
+	args->osd_timeout = CEPH_OSD_TIMEOUT_DEFAULT;
+	args->osd_keepalive_timeout = CEPH_OSD_KEEPALIVE_DEFAULT;
+	args->mount_timeout = CEPH_MOUNT_TIMEOUT_DEFAULT; /* seconds */
+	args->osd_idle_ttl = CEPH_OSD_IDLE_TTL_DEFAULT;   /* seconds */
+	args->caps_wanted_delay_min = CEPH_CAPS_WANTED_DELAY_MIN_DEFAULT;
+	args->caps_wanted_delay_max = CEPH_CAPS_WANTED_DELAY_MAX_DEFAULT;
+	args->rsize = CEPH_MOUNT_RSIZE_DEFAULT;
+	args->snapdir_name = kstrdup(CEPH_SNAPDIRNAME_DEFAULT, GFP_KERNEL);
+	args->cap_release_safety = CEPH_CAPS_PER_RELEASE * 4;
+	args->max_readdir = 1024;
+	args->congestion_kb = default_congestion_kb();
+
+	/* ip1[:port1][,ip2[:port2]...]:/subdir/in/fs */
+	err = -EINVAL;
+	if (!dev_name)
+		goto out;
+	*path = strstr(dev_name, ":/");
+	if (*path == NULL) {
+		pr_err("device name is missing path (no :/ in %s)\n",
+		       dev_name);
+		goto out;
+	}
+
+	/* get mon ip(s) */
+	err = ceph_parse_ips(dev_name, *path, args->mon_addr,
+			     CEPH_MAX_MON, &args->num_mon);
+	if (err < 0)
+		goto out;
+
+	/* path on server */
+	*path += 2;
+	dout("server path '%s'\n", *path);
+
+	/* parse mount options */
+	while ((c = strsep(&options, ",")) != NULL) {
+		int token, intval, ret;
+		if (!*c)
+			continue;
+		err = -EINVAL;
+		token = match_token((char *)c, arg_tokens, argstr);
+		if (token < 0) {
+			pr_err("bad mount option at '%s'\n", c);
+			goto out;
+		}
+		if (token < Opt_last_int) {
+			ret = match_int(&argstr[0], &intval);
+			if (ret < 0) {
+				pr_err("bad mount option arg (not int) "
+				       "at '%s'\n", c);
+				continue;
+			}
+			dout("got int token %d val %d\n", token, intval);
+		} else if (token > Opt_last_int && token < Opt_last_string) {
+			dout("got string token %d val %s\n", token,
+			     argstr[0].from);
+		} else {
+			dout("got token %d\n", token);
+		}
+		switch (token) {
+		case Opt_fsidmajor:
+			*(__le64 *)&args->fsid.fsid[0] = cpu_to_le64(intval);
+			break;
+		case Opt_fsidminor:
+			*(__le64 *)&args->fsid.fsid[8] = cpu_to_le64(intval);
+			break;
+		case Opt_ip:
+			err = ceph_parse_ips(argstr[0].from,
+					     argstr[0].to,
+					     &args->my_addr,
+					     1, NULL);
+			if (err < 0)
+				goto out;
+			args->flags |= CEPH_OPT_MYIP;
+			break;
+
+		case Opt_snapdirname:
+			kfree(args->snapdir_name);
+			args->snapdir_name = kstrndup(argstr[0].from,
+					      argstr[0].to-argstr[0].from,
+					      GFP_KERNEL);
+			break;
+		case Opt_name:
+			args->name = kstrndup(argstr[0].from,
+					      argstr[0].to-argstr[0].from,
+					      GFP_KERNEL);
+			break;
+		case Opt_secret:
+			args->secret = kstrndup(argstr[0].from,
+						argstr[0].to-argstr[0].from,
+						GFP_KERNEL);
+			break;
+
+			/* misc */
+		case Opt_wsize:
+			args->wsize = intval;
+			break;
+		case Opt_rsize:
+			args->rsize = intval;
+			break;
+		case Opt_osdtimeout:
+			args->osd_timeout = intval;
+			break;
+		case Opt_osdkeepalivetimeout:
+			args->osd_keepalive_timeout = intval;
+			break;
+		case Opt_mount_timeout:
+			args->mount_timeout = intval;
+			break;
+		case Opt_caps_wanted_delay_min:
+			args->caps_wanted_delay_min = intval;
+			break;
+		case Opt_caps_wanted_delay_max:
+			args->caps_wanted_delay_max = intval;
+			break;
+		case Opt_readdir_max_entries:
+			args->max_readdir = intval;
+			break;
+		case Opt_congestion_kb:
+			args->congestion_kb = intval;
+			break;
+
+		case Opt_noshare:
+			args->flags |= CEPH_OPT_NOSHARE;
+			break;
+
+		case Opt_dirstat:
+			args->flags |= CEPH_OPT_DIRSTAT;
+			break;
+		case Opt_nodirstat:
+			args->flags &= ~CEPH_OPT_DIRSTAT;
+			break;
+		case Opt_rbytes:
+			args->flags |= CEPH_OPT_RBYTES;
+			break;
+		case Opt_norbytes:
+			args->flags &= ~CEPH_OPT_RBYTES;
+			break;
+		case Opt_nocrc:
+			args->flags |= CEPH_OPT_NOCRC;
+			break;
+		case Opt_noasyncreaddir:
+			args->flags |= CEPH_OPT_NOASYNCREADDIR;
+			break;
+
+		default:
+			BUG_ON(token);
+		}
+	}
+	return args;
+
+out:
+	kfree(args->mon_addr);
+	kfree(args);
+	return ERR_PTR(err);
+}
+
+static void destroy_mount_args(struct ceph_mount_args *args)
+{
+	dout("destroy_mount_args %p\n", args);
+	kfree(args->snapdir_name);
+	args->snapdir_name = NULL;
+	kfree(args->name);
+	args->name = NULL;
+	kfree(args->secret);
+	args->secret = NULL;
+	kfree(args);
+}
+
+/*
+ * create a fresh client instance
+ */
+static struct ceph_client *ceph_create_client(struct ceph_mount_args *args)
+{
+	struct ceph_client *client;
+	int err = -ENOMEM;
+
+	client = kzalloc(sizeof(*client), GFP_KERNEL);
+	if (client == NULL)
+		return ERR_PTR(-ENOMEM);
+
+	mutex_init(&client->mount_mutex);
+
+	init_waitqueue_head(&client->auth_wq);
+
+	client->sb = NULL;
+	client->mount_state = CEPH_MOUNT_MOUNTING;
+	client->mount_args = args;
+
+	client->msgr = NULL;
+
+	client->auth_err = 0;
+	atomic_long_set(&client->writeback_count, 0);
+
+	err = bdi_init(&client->backing_dev_info);
+	if (err < 0)
+		goto fail;
+
+	err = -ENOMEM;
+	client->wb_wq = create_workqueue("ceph-writeback");
+	if (client->wb_wq == NULL)
+		goto fail_bdi;
+	client->pg_inv_wq = create_singlethread_workqueue("ceph-pg-invalid");
+	if (client->pg_inv_wq == NULL)
+		goto fail_wb_wq;
+	client->trunc_wq = create_singlethread_workqueue("ceph-trunc");
+	if (client->trunc_wq == NULL)
+		goto fail_pg_inv_wq;
+
+	/* set up mempools */
+	err = -ENOMEM;
+	client->wb_pagevec_pool = mempool_create_kmalloc_pool(10,
+			      client->mount_args->wsize >> PAGE_CACHE_SHIFT);
+	if (!client->wb_pagevec_pool)
+		goto fail_trunc_wq;
+
+	/* caps */
+	client->min_caps = args->max_readdir;
+	ceph_adjust_min_caps(client->min_caps);
+
+	/* subsystems */
+	err = ceph_monc_init(&client->monc, client);
+	if (err < 0)
+		goto fail_mempool;
+	err = ceph_osdc_init(&client->osdc, client);
+	if (err < 0)
+		goto fail_monc;
+	err = ceph_mdsc_init(&client->mdsc, client);
+	if (err < 0)
+		goto fail_osdc;
+	return client;
+
+fail_osdc:
+	ceph_osdc_stop(&client->osdc);
+fail_monc:
+	ceph_monc_stop(&client->monc);
+fail_mempool:
+	mempool_destroy(client->wb_pagevec_pool);
+fail_trunc_wq:
+	destroy_workqueue(client->trunc_wq);
+fail_pg_inv_wq:
+	destroy_workqueue(client->pg_inv_wq);
+fail_wb_wq:
+	destroy_workqueue(client->wb_wq);
+fail_bdi:
+	bdi_destroy(&client->backing_dev_info);
+fail:
+	kfree(client);
+	return ERR_PTR(err);
+}
+
+static void ceph_destroy_client(struct ceph_client *client)
+{
+	dout("destroy_client %p\n", client);
+
+	/* unmount */
+	ceph_mdsc_stop(&client->mdsc);
+	ceph_monc_stop(&client->monc);
+	ceph_osdc_stop(&client->osdc);
+
+	ceph_adjust_min_caps(-client->min_caps);
+
+	ceph_debugfs_client_cleanup(client);
+	destroy_workqueue(client->wb_wq);
+	destroy_workqueue(client->pg_inv_wq);
+	destroy_workqueue(client->trunc_wq);
+
+	if (client->msgr)
+		ceph_messenger_destroy(client->msgr);
+	mempool_destroy(client->wb_pagevec_pool);
+
+	destroy_mount_args(client->mount_args);
+
+	kfree(client);
+	dout("destroy_client %p done\n", client);
+}
+
+/*
+ * Initially learn our fsid, or verify an fsid matches.
+ */
+int ceph_check_fsid(struct ceph_client *client, struct ceph_fsid *fsid)
+{
+	if (client->have_fsid) {
+		if (ceph_fsid_compare(&client->fsid, fsid)) {
+			pr_err("bad fsid, had " FSID_FORMAT " got " FSID_FORMAT,
+			       PR_FSID(&client->fsid), PR_FSID(fsid));
+			return -1;
+		}
+	} else {
+		pr_info("client%lld fsid " FSID_FORMAT "\n",
+			client->monc.auth->global_id, PR_FSID(fsid));
+		memcpy(&client->fsid, fsid, sizeof(*fsid));
+		ceph_debugfs_client_init(client);
+		client->have_fsid = true;
+	}
+	return 0;
+}
+
+/*
+ * true if we have the mon map (and have thus joined the cluster)
+ */
+static int have_mon_map(struct ceph_client *client)
+{
+	return client->monc.monmap && client->monc.monmap->epoch;
+}
+
+/*
+ * Bootstrap mount by opening the root directory.  Note the mount
+ * @started time from caller, and time out if this takes too long.
+ */
+static struct dentry *open_root_dentry(struct ceph_client *client,
+				       const char *path,
+				       unsigned long started)
+{
+	struct ceph_mds_client *mdsc = &client->mdsc;
+	struct ceph_mds_request *req = NULL;
+	int err;
+	struct dentry *root;
+
+	/* open dir */
+	dout("open_root_inode opening '%s'\n", path);
+	req = ceph_mdsc_create_request(mdsc, CEPH_MDS_OP_GETATTR, USE_ANY_MDS);
+	if (IS_ERR(req))
+		return ERR_PTR(PTR_ERR(req));
+	req->r_path1 = kstrdup(path, GFP_NOFS);
+	req->r_ino1.ino = CEPH_INO_ROOT;
+	req->r_ino1.snap = CEPH_NOSNAP;
+	req->r_started = started;
+	req->r_timeout = client->mount_args->mount_timeout * HZ;
+	req->r_args.getattr.mask = cpu_to_le32(CEPH_STAT_CAP_INODE);
+	req->r_num_caps = 2;
+	err = ceph_mdsc_do_request(mdsc, NULL, req);
+	if (err == 0) {
+		dout("open_root_inode success\n");
+		if (ceph_ino(req->r_target_inode) == CEPH_INO_ROOT &&
+		    client->sb->s_root == NULL)
+			root = d_alloc_root(req->r_target_inode);
+		else
+			root = d_obtain_alias(req->r_target_inode);
+		req->r_target_inode = NULL;
+		dout("open_root_inode success, root dentry is %p\n", root);
+	} else {
+		root = ERR_PTR(err);
+	}
+	ceph_mdsc_put_request(req);
+	return root;
+}
+
+/*
+ * mount: join the ceph cluster, and open root directory.
+ */
+static int ceph_mount(struct ceph_client *client, struct vfsmount *mnt,
+		      const char *path)
+{
+	struct ceph_entity_addr *myaddr = NULL;
+	int err;
+	unsigned long timeout = client->mount_args->mount_timeout * HZ;
+	unsigned long started = jiffies;  /* note the start time */
+	struct dentry *root;
+
+	dout("mount start\n");
+	mutex_lock(&client->mount_mutex);
+
+	/* initialize the messenger */
+	if (client->msgr == NULL) {
+		if (ceph_test_opt(client, MYIP))
+			myaddr = &client->mount_args->my_addr;
+		client->msgr = ceph_messenger_create(myaddr);
+		if (IS_ERR(client->msgr)) {
+			err = PTR_ERR(client->msgr);
+			client->msgr = NULL;
+			goto out;
+		}
+		client->msgr->nocrc = ceph_test_opt(client, NOCRC);
+	}
+
+	/* open session, and wait for mon, mds, and osd maps */
+	err = ceph_monc_open_session(&client->monc);
+	if (err < 0)
+		goto out;
+
+	while (!have_mon_map(client)) {
+		err = -EIO;
+		if (timeout && time_after_eq(jiffies, started + timeout))
+			goto out;
+
+		/* wait */
+		dout("mount waiting for mon_map\n");
+		err = wait_event_interruptible_timeout(client->auth_wq,
+			       have_mon_map(client) || (client->auth_err < 0),
+			       timeout);
+		if (err == -EINTR || err == -ERESTARTSYS)
+			goto out;
+		if (client->auth_err < 0) {
+			err = client->auth_err;
+			goto out;
+		}
+	}
+
+	dout("mount opening root\n");
+	root = open_root_dentry(client, "", started);
+	if (IS_ERR(root)) {
+		err = PTR_ERR(root);
+		goto out;
+	}
+	if (client->sb->s_root)
+		dput(root);
+	else
+		client->sb->s_root = root;
+
+	if (path[0] == 0) {
+		dget(root);
+	} else {
+		dout("mount opening base mountpoint\n");
+		root = open_root_dentry(client, path, started);
+		if (IS_ERR(root)) {
+			err = PTR_ERR(root);
+			dput(client->sb->s_root);
+			client->sb->s_root = NULL;
+			goto out;
+		}
+	}
+
+	mnt->mnt_root = root;
+	mnt->mnt_sb = client->sb;
+
+	client->mount_state = CEPH_MOUNT_MOUNTED;
+	dout("mount success\n");
+	err = 0;
+
+out:
+	mutex_unlock(&client->mount_mutex);
+	return err;
+}
+
+static int ceph_set_super(struct super_block *s, void *data)
+{
+	struct ceph_client *client = data;
+	int ret;
+
+	dout("set_super %p data %p\n", s, data);
+
+	s->s_flags = client->mount_args->sb_flags;
+	s->s_maxbytes = 1ULL << 40;  /* temp value until we get mdsmap */
+
+	s->s_fs_info = client;
+	client->sb = s;
+
+	s->s_op = &ceph_super_ops;
+	s->s_export_op = &ceph_export_ops;
+
+	s->s_time_gran = 1000;  /* 1000 ns == 1 us */
+
+	ret = set_anon_super(s, NULL);  /* what is that second arg for? */
+	if (ret != 0)
+		goto fail;
+
+	return ret;
+
+fail:
+	s->s_fs_info = NULL;
+	client->sb = NULL;
+	return ret;
+}
+
+/*
+ * share superblock if same fs AND options
+ */
+static int ceph_compare_super(struct super_block *sb, void *data)
+{
+	struct ceph_client *new = data;
+	struct ceph_mount_args *args = new->mount_args;
+	struct ceph_client *other = ceph_sb_to_client(sb);
+	int i;
+
+	dout("ceph_compare_super %p\n", sb);
+	if (args->flags & CEPH_OPT_FSID) {
+		if (ceph_fsid_compare(&args->fsid, &other->fsid)) {
+			dout("fsid doesn't match\n");
+			return 0;
+		}
+	} else {
+		/* do we share (a) monitor? */
+		for (i = 0; i < new->monc.monmap->num_mon; i++)
+			if (ceph_monmap_contains(other->monc.monmap,
+					 &new->monc.monmap->mon_inst[i].addr))
+				break;
+		if (i == new->monc.monmap->num_mon) {
+			dout("mon ip not part of monmap\n");
+			return 0;
+		}
+		dout("mon ip matches existing sb %p\n", sb);
+	}
+	if (args->sb_flags != other->mount_args->sb_flags) {
+		dout("flags differ\n");
+		return 0;
+	}
+	return 1;
+}
+
+/*
+ * construct our own bdi so we can control readahead, etc.
+ */
+static int ceph_register_bdi(struct super_block *sb, struct ceph_client *client)
+{
+	int err;
+
+	sb->s_bdi = &client->backing_dev_info;
+
+	/* set ra_pages based on rsize mount option? */
+	if (client->mount_args->rsize >= PAGE_CACHE_SIZE)
+		client->backing_dev_info.ra_pages =
+			(client->mount_args->rsize + PAGE_CACHE_SIZE - 1)
+			>> PAGE_SHIFT;
+	err = bdi_register_dev(&client->backing_dev_info, sb->s_dev);
+	return err;
+}
+
+static int ceph_get_sb(struct file_system_type *fs_type,
+		       int flags, const char *dev_name, void *data,
+		       struct vfsmount *mnt)
+{
+	struct super_block *sb;
+	struct ceph_client *client;
+	int err;
+	int (*compare_super)(struct super_block *, void *) = ceph_compare_super;
+	const char *path = NULL;
+	struct ceph_mount_args *args;
+
+	dout("ceph_get_sb\n");
+	args = parse_mount_args(flags, data, dev_name, &path);
+	if (IS_ERR(args)) {
+		err = PTR_ERR(args);
+		goto out_final;
+	}
+
+	/* create client (which we may/may not use) */
+	client = ceph_create_client(args);
+	if (IS_ERR(client)) {
+		err = PTR_ERR(client);
+		goto out_final;
+	}
+
+	if (client->mount_args->flags & CEPH_OPT_NOSHARE)
+		compare_super = NULL;
+	sb = sget(fs_type, compare_super, ceph_set_super, client);
+	if (IS_ERR(sb)) {
+		err = PTR_ERR(sb);
+		goto out;
+	}
+
+	if (ceph_client(sb) != client) {
+		ceph_destroy_client(client);
+		client = ceph_client(sb);
+		dout("get_sb got existing client %p\n", client);
+	} else {
+		dout("get_sb using new client %p\n", client);
+		err = ceph_register_bdi(sb, client);
+		if (err < 0)
+			goto out_splat;
+	}
+
+	err = ceph_mount(client, mnt, path);
+	if (err < 0)
+		goto out_splat;
+	dout("root %p inode %p ino %llx.%llx\n", mnt->mnt_root,
+	     mnt->mnt_root->d_inode, ceph_vinop(mnt->mnt_root->d_inode));
+	return 0;
+
+out_splat:
+	ceph_mdsc_close_sessions(&client->mdsc);
+	up_write(&sb->s_umount);
+	deactivate_super(sb);
+	goto out_final;
+
+out:
+	ceph_destroy_client(client);
+out_final:
+	dout("ceph_get_sb fail %d\n", err);
+	return err;
+}
+
+static void ceph_kill_sb(struct super_block *s)
+{
+	struct ceph_client *client = ceph_sb_to_client(s);
+	dout("kill_sb %p\n", s);
+	ceph_mdsc_pre_umount(&client->mdsc);
+	kill_anon_super(s);    /* will call put_super after sb is r/o */
+	if (s->s_bdi == &client->backing_dev_info)
+		bdi_unregister(&client->backing_dev_info);
+	bdi_destroy(&client->backing_dev_info);
+	ceph_destroy_client(client);
+}
+
+static struct file_system_type ceph_fs_type = {
+	.owner		= THIS_MODULE,
+	.name		= "ceph",
+	.get_sb		= ceph_get_sb,
+	.kill_sb	= ceph_kill_sb,
+	.fs_flags	= FS_RENAME_DOES_D_MOVE,
+};
+
+#define _STRINGIFY(x) #x
+#define STRINGIFY(x) _STRINGIFY(x)
+
+static int __init init_ceph(void)
+{
+	int ret = 0;
+
+	ret = ceph_debugfs_init();
+	if (ret < 0)
+		goto out;
+
+	ret = ceph_msgr_init();
+	if (ret < 0)
+		goto out_debugfs;
+
+	ret = init_caches();
+	if (ret)
+		goto out_msgr;
+
+	ceph_caps_init();
+
+	ret = register_filesystem(&ceph_fs_type);
+	if (ret)
+		goto out_icache;
+
+	pr_info("loaded %d.%d.%d (mon/mds/osd proto %d/%d/%d)\n",
+		CEPH_VERSION_MAJOR, CEPH_VERSION_MINOR, CEPH_VERSION_PATCH,
+		CEPH_MONC_PROTOCOL, CEPH_MDSC_PROTOCOL, CEPH_OSDC_PROTOCOL);
+	return 0;
+
+out_icache:
+	destroy_caches();
+out_msgr:
+	ceph_msgr_exit();
+out_debugfs:
+	ceph_debugfs_cleanup();
+out:
+	return ret;
+}
+
+static void __exit exit_ceph(void)
+{
+	dout("exit_ceph\n");
+	unregister_filesystem(&ceph_fs_type);
+	ceph_caps_finalize();
+	destroy_caches();
+	ceph_msgr_exit();
+	ceph_debugfs_cleanup();
+}
+
+module_init(init_ceph);
+module_exit(exit_ceph);
+
+MODULE_AUTHOR("Sage Weil <sage@newdream.net>");
+MODULE_AUTHOR("Yehuda Sadeh <yehuda@hq.newdream.net>");
+MODULE_AUTHOR("Patience Warnick <patience@newdream.net>");
+MODULE_DESCRIPTION("Ceph filesystem for Linux");
+MODULE_LICENSE("GPL");
diff --git a/fs/ceph/super.h b/fs/ceph/super.h
new file mode 100644
index 000000000000..65d12036b670
--- /dev/null
+++ b/fs/ceph/super.h
@@ -0,0 +1,901 @@
+#ifndef _FS_CEPH_SUPER_H
+#define _FS_CEPH_SUPER_H
+
+#include "ceph_debug.h"
+
+#include <asm/unaligned.h>
+#include <linux/backing-dev.h>
+#include <linux/completion.h>
+#include <linux/exportfs.h>
+#include <linux/fs.h>
+#include <linux/mempool.h>
+#include <linux/pagemap.h>
+#include <linux/wait.h>
+#include <linux/writeback.h>
+
+#include "types.h"
+#include "messenger.h"
+#include "msgpool.h"
+#include "mon_client.h"
+#include "mds_client.h"
+#include "osd_client.h"
+#include "ceph_fs.h"
+
+/* f_type in struct statfs */
+#define CEPH_SUPER_MAGIC 0x00c36400
+
+/* large granularity for statfs utilization stats to facilitate
+ * large volume sizes on 32-bit machines. */
+#define CEPH_BLOCK_SHIFT   20  /* 1 MB */
+#define CEPH_BLOCK         (1 << CEPH_BLOCK_SHIFT)
+
+/*
+ * mount options
+ */
+#define CEPH_OPT_FSID             (1<<0)
+#define CEPH_OPT_NOSHARE          (1<<1) /* don't share client with other sbs */
+#define CEPH_OPT_MYIP             (1<<2) /* specified my ip */
+#define CEPH_OPT_DIRSTAT          (1<<4) /* funky `cat dirname` for stats */
+#define CEPH_OPT_RBYTES           (1<<5) /* dir st_bytes = rbytes */
+#define CEPH_OPT_NOCRC            (1<<6) /* no data crc on writes */
+#define CEPH_OPT_NOASYNCREADDIR   (1<<7) /* no dcache readdir */
+
+#define CEPH_OPT_DEFAULT   (CEPH_OPT_RBYTES)
+
+#define ceph_set_opt(client, opt) \
+	(client)->mount_args->flags |= CEPH_OPT_##opt;
+#define ceph_test_opt(client, opt) \
+	(!!((client)->mount_args->flags & CEPH_OPT_##opt))
+
+
+struct ceph_mount_args {
+	int sb_flags;
+	int num_mon;
+	struct ceph_entity_addr *mon_addr;
+	int flags;
+	int mount_timeout;
+	int osd_idle_ttl;
+	int caps_wanted_delay_min, caps_wanted_delay_max;
+	struct ceph_fsid fsid;
+	struct ceph_entity_addr my_addr;
+	int wsize;
+	int rsize;            /* max readahead */
+	int max_readdir;      /* max readdir size */
+	int congestion_kb;      /* max readdir size */
+	int osd_timeout;
+	int osd_keepalive_timeout;
+	char *snapdir_name;   /* default ".snap" */
+	char *name;
+	char *secret;
+	int cap_release_safety;
+};
+
+/*
+ * defaults
+ */
+#define CEPH_MOUNT_TIMEOUT_DEFAULT  60
+#define CEPH_OSD_TIMEOUT_DEFAULT    60  /* seconds */
+#define CEPH_OSD_KEEPALIVE_DEFAULT  5
+#define CEPH_OSD_IDLE_TTL_DEFAULT    60
+#define CEPH_MOUNT_RSIZE_DEFAULT    (512*1024) /* readahead */
+
+#define CEPH_MSG_MAX_FRONT_LEN	(16*1024*1024)
+#define CEPH_MSG_MAX_DATA_LEN	(16*1024*1024)
+
+#define CEPH_SNAPDIRNAME_DEFAULT ".snap"
+#define CEPH_AUTH_NAME_DEFAULT   "guest"
+
+/*
+ * Delay telling the MDS we no longer want caps, in case we reopen
+ * the file.  Delay a minimum amount of time, even if we send a cap
+ * message for some other reason.  Otherwise, take the oppotunity to
+ * update the mds to avoid sending another message later.
+ */
+#define CEPH_CAPS_WANTED_DELAY_MIN_DEFAULT      5  /* cap release delay */
+#define CEPH_CAPS_WANTED_DELAY_MAX_DEFAULT     60  /* cap release delay */
+
+
+/* mount state */
+enum {
+	CEPH_MOUNT_MOUNTING,
+	CEPH_MOUNT_MOUNTED,
+	CEPH_MOUNT_UNMOUNTING,
+	CEPH_MOUNT_UNMOUNTED,
+	CEPH_MOUNT_SHUTDOWN,
+};
+
+/*
+ * subtract jiffies
+ */
+static inline unsigned long time_sub(unsigned long a, unsigned long b)
+{
+	BUG_ON(time_after(b, a));
+	return (long)a - (long)b;
+}
+
+/*
+ * per-filesystem client state
+ *
+ * possibly shared by multiple mount points, if they are
+ * mounting the same ceph filesystem/cluster.
+ */
+struct ceph_client {
+	struct ceph_fsid fsid;
+	bool have_fsid;
+
+	struct mutex mount_mutex;       /* serialize mount attempts */
+	struct ceph_mount_args *mount_args;
+
+	struct super_block *sb;
+
+	unsigned long mount_state;
+	wait_queue_head_t auth_wq;
+
+	int auth_err;
+
+	int min_caps;                  /* min caps i added */
+
+	struct ceph_messenger *msgr;   /* messenger instance */
+	struct ceph_mon_client monc;
+	struct ceph_mds_client mdsc;
+	struct ceph_osd_client osdc;
+
+	/* writeback */
+	mempool_t *wb_pagevec_pool;
+	struct workqueue_struct *wb_wq;
+	struct workqueue_struct *pg_inv_wq;
+	struct workqueue_struct *trunc_wq;
+	atomic_long_t writeback_count;
+
+	struct backing_dev_info backing_dev_info;
+
+#ifdef CONFIG_DEBUG_FS
+	struct dentry *debugfs_monmap;
+	struct dentry *debugfs_mdsmap, *debugfs_osdmap;
+	struct dentry *debugfs_dir, *debugfs_dentry_lru, *debugfs_caps;
+	struct dentry *debugfs_congestion_kb;
+	struct dentry *debugfs_bdi;
+#endif
+};
+
+static inline struct ceph_client *ceph_client(struct super_block *sb)
+{
+	return sb->s_fs_info;
+}
+
+
+/*
+ * File i/o capability.  This tracks shared state with the metadata
+ * server that allows us to cache or writeback attributes or to read
+ * and write data.  For any given inode, we should have one or more
+ * capabilities, one issued by each metadata server, and our
+ * cumulative access is the OR of all issued capabilities.
+ *
+ * Each cap is referenced by the inode's i_caps rbtree and by per-mds
+ * session capability lists.
+ */
+struct ceph_cap {
+	struct ceph_inode_info *ci;
+	struct rb_node ci_node;          /* per-ci cap tree */
+	struct ceph_mds_session *session;
+	struct list_head session_caps;   /* per-session caplist */
+	int mds;
+	u64 cap_id;       /* unique cap id (mds provided) */
+	int issued;       /* latest, from the mds */
+	int implemented;  /* implemented superset of issued (for revocation) */
+	int mds_wanted;
+	u32 seq, issue_seq, mseq;
+	u32 cap_gen;      /* active/stale cycle */
+	unsigned long last_used;
+	struct list_head caps_item;
+};
+
+#define CHECK_CAPS_NODELAY    1  /* do not delay any further */
+#define CHECK_CAPS_AUTHONLY   2  /* only check auth cap */
+#define CHECK_CAPS_FLUSH      4  /* flush any dirty caps */
+
+/*
+ * Snapped cap state that is pending flush to mds.  When a snapshot occurs,
+ * we first complete any in-process sync writes and writeback any dirty
+ * data before flushing the snapped state (tracked here) back to the MDS.
+ */
+struct ceph_cap_snap {
+	atomic_t nref;
+	struct ceph_inode_info *ci;
+	struct list_head ci_item, flushing_item;
+
+	u64 follows, flush_tid;
+	int issued, dirty;
+	struct ceph_snap_context *context;
+
+	mode_t mode;
+	uid_t uid;
+	gid_t gid;
+
+	void *xattr_blob;
+	int xattr_len;
+	u64 xattr_version;
+
+	u64 size;
+	struct timespec mtime, atime, ctime;
+	u64 time_warp_seq;
+	int writing;   /* a sync write is still in progress */
+	int dirty_pages;     /* dirty pages awaiting writeback */
+};
+
+static inline void ceph_put_cap_snap(struct ceph_cap_snap *capsnap)
+{
+	if (atomic_dec_and_test(&capsnap->nref))
+		kfree(capsnap);
+}
+
+/*
+ * The frag tree describes how a directory is fragmented, potentially across
+ * multiple metadata servers.  It is also used to indicate points where
+ * metadata authority is delegated, and whether/where metadata is replicated.
+ *
+ * A _leaf_ frag will be present in the i_fragtree IFF there is
+ * delegation info.  That is, if mds >= 0 || ndist > 0.
+ */
+#define CEPH_MAX_DIRFRAG_REP 4
+
+struct ceph_inode_frag {
+	struct rb_node node;
+
+	/* fragtree state */
+	u32 frag;
+	int split_by;         /* i.e. 2^(split_by) children */
+
+	/* delegation and replication info */
+	int mds;              /* -1 if same authority as parent */
+	int ndist;            /* >0 if replicated */
+	int dist[CEPH_MAX_DIRFRAG_REP];
+};
+
+/*
+ * We cache inode xattrs as an encoded blob until they are first used,
+ * at which point we parse them into an rbtree.
+ */
+struct ceph_inode_xattr {
+	struct rb_node node;
+
+	const char *name;
+	int name_len;
+	const char *val;
+	int val_len;
+	int dirty;
+
+	int should_free_name;
+	int should_free_val;
+};
+
+struct ceph_inode_xattrs_info {
+	/*
+	 * (still encoded) xattr blob. we avoid the overhead of parsing
+	 * this until someone actually calls getxattr, etc.
+	 *
+	 * blob->vec.iov_len == 4 implies there are no xattrs; blob ==
+	 * NULL means we don't know.
+	*/
+	struct ceph_buffer *blob, *prealloc_blob;
+
+	struct rb_root index;
+	bool dirty;
+	int count;
+	int names_size;
+	int vals_size;
+	u64 version, index_version;
+};
+
+/*
+ * Ceph inode.
+ */
+#define CEPH_I_COMPLETE  1  /* we have complete directory cached */
+#define CEPH_I_NODELAY   4  /* do not delay cap release */
+#define CEPH_I_FLUSH     8  /* do not delay flush of dirty metadata */
+#define CEPH_I_NOFLUSH  16  /* do not flush dirty caps */
+
+struct ceph_inode_info {
+	struct ceph_vino i_vino;   /* ceph ino + snap */
+
+	u64 i_version;
+	u32 i_time_warp_seq;
+
+	unsigned i_ceph_flags;
+	unsigned long i_release_count;
+
+	struct ceph_file_layout i_layout;
+	char *i_symlink;
+
+	/* for dirs */
+	struct timespec i_rctime;
+	u64 i_rbytes, i_rfiles, i_rsubdirs;
+	u64 i_files, i_subdirs;
+	u64 i_max_offset;  /* largest readdir offset, set with I_COMPLETE */
+
+	struct rb_root i_fragtree;
+	struct mutex i_fragtree_mutex;
+
+	struct ceph_inode_xattrs_info i_xattrs;
+
+	/* capabilities.  protected _both_ by i_lock and cap->session's
+	 * s_mutex. */
+	struct rb_root i_caps;           /* cap list */
+	struct ceph_cap *i_auth_cap;     /* authoritative cap, if any */
+	unsigned i_dirty_caps, i_flushing_caps;     /* mask of dirtied fields */
+	struct list_head i_dirty_item, i_flushing_item;
+	u64 i_cap_flush_seq;
+	/* we need to track cap writeback on a per-cap-bit basis, to allow
+	 * overlapping, pipelined cap flushes to the mds.  we can probably
+	 * reduce the tid to 8 bits if we're concerned about inode size. */
+	u16 i_cap_flush_last_tid, i_cap_flush_tid[CEPH_CAP_BITS];
+	wait_queue_head_t i_cap_wq;      /* threads waiting on a capability */
+	unsigned long i_hold_caps_min; /* jiffies */
+	unsigned long i_hold_caps_max; /* jiffies */
+	struct list_head i_cap_delay_list;  /* for delayed cap release to mds */
+	int i_cap_exporting_mds;         /* to handle cap migration between */
+	unsigned i_cap_exporting_mseq;   /*  mds's. */
+	unsigned i_cap_exporting_issued;
+	struct ceph_cap_reservation i_cap_migration_resv;
+	struct list_head i_cap_snaps;   /* snapped state pending flush to mds */
+	struct ceph_snap_context *i_head_snapc;  /* set if wr_buffer_head > 0 */
+	unsigned i_snap_caps;           /* cap bits for snapped files */
+
+	int i_nr_by_mode[CEPH_FILE_MODE_NUM];  /* open file counts */
+
+	u32 i_truncate_seq;        /* last truncate to smaller size */
+	u64 i_truncate_size;       /*  and the size we last truncated down to */
+	int i_truncate_pending;    /*  still need to call vmtruncate */
+
+	u64 i_max_size;            /* max file size authorized by mds */
+	u64 i_reported_size; /* (max_)size reported to or requested of mds */
+	u64 i_wanted_max_size;     /* offset we'd like to write too */
+	u64 i_requested_max_size;  /* max_size we've requested */
+
+	/* held references to caps */
+	int i_pin_ref;
+	int i_rd_ref, i_rdcache_ref, i_wr_ref;
+	int i_wrbuffer_ref, i_wrbuffer_ref_head;
+	u32 i_shared_gen;       /* increment each time we get FILE_SHARED */
+	u32 i_rdcache_gen;      /* we increment this each time we get
+				   FILE_CACHE.  If it's non-zero, we
+				   _may_ have cached pages. */
+	u32 i_rdcache_revoking; /* RDCACHE gen to async invalidate, if any */
+
+	struct list_head i_unsafe_writes; /* uncommitted sync writes */
+	struct list_head i_unsafe_dirops; /* uncommitted mds dir ops */
+	spinlock_t i_unsafe_lock;
+
+	struct ceph_snap_realm *i_snap_realm; /* snap realm (if caps) */
+	int i_snap_realm_counter; /* snap realm (if caps) */
+	struct list_head i_snap_realm_item;
+	struct list_head i_snap_flush_item;
+
+	struct work_struct i_wb_work;  /* writeback work */
+	struct work_struct i_pg_inv_work;  /* page invalidation work */
+
+	struct work_struct i_vmtruncate_work;
+
+	struct inode vfs_inode; /* at end */
+};
+
+static inline struct ceph_inode_info *ceph_inode(struct inode *inode)
+{
+	return container_of(inode, struct ceph_inode_info, vfs_inode);
+}
+
+static inline void ceph_i_clear(struct inode *inode, unsigned mask)
+{
+	struct ceph_inode_info *ci = ceph_inode(inode);
+
+	spin_lock(&inode->i_lock);
+	ci->i_ceph_flags &= ~mask;
+	spin_unlock(&inode->i_lock);
+}
+
+static inline void ceph_i_set(struct inode *inode, unsigned mask)
+{
+	struct ceph_inode_info *ci = ceph_inode(inode);
+
+	spin_lock(&inode->i_lock);
+	ci->i_ceph_flags |= mask;
+	spin_unlock(&inode->i_lock);
+}
+
+static inline bool ceph_i_test(struct inode *inode, unsigned mask)
+{
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	bool r;
+
+	smp_mb();
+	r = (ci->i_ceph_flags & mask) == mask;
+	return r;
+}
+
+
+/* find a specific frag @f */
+extern struct ceph_inode_frag *__ceph_find_frag(struct ceph_inode_info *ci,
+						u32 f);
+
+/*
+ * choose fragment for value @v.  copy frag content to pfrag, if leaf
+ * exists
+ */
+extern u32 ceph_choose_frag(struct ceph_inode_info *ci, u32 v,
+			    struct ceph_inode_frag *pfrag,
+			    int *found);
+
+/*
+ * Ceph dentry state
+ */
+struct ceph_dentry_info {
+	struct ceph_mds_session *lease_session;
+	u32 lease_gen, lease_shared_gen;
+	u32 lease_seq;
+	unsigned long lease_renew_after, lease_renew_from;
+	struct list_head lru;
+	struct dentry *dentry;
+	u64 time;
+	u64 offset;
+};
+
+static inline struct ceph_dentry_info *ceph_dentry(struct dentry *dentry)
+{
+	return (struct ceph_dentry_info *)dentry->d_fsdata;
+}
+
+static inline loff_t ceph_make_fpos(unsigned frag, unsigned off)
+{
+	return ((loff_t)frag << 32) | (loff_t)off;
+}
+
+/*
+ * ino_t is <64 bits on many architectures, blech.
+ *
+ * don't include snap in ino hash, at least for now.
+ */
+static inline ino_t ceph_vino_to_ino(struct ceph_vino vino)
+{
+	ino_t ino = (ino_t)vino.ino;  /* ^ (vino.snap << 20); */
+#if BITS_PER_LONG == 32
+	ino ^= vino.ino >> (sizeof(u64)-sizeof(ino_t)) * 8;
+	if (!ino)
+		ino = 1;
+#endif
+	return ino;
+}
+
+static inline int ceph_set_ino_cb(struct inode *inode, void *data)
+{
+	ceph_inode(inode)->i_vino = *(struct ceph_vino *)data;
+	inode->i_ino = ceph_vino_to_ino(*(struct ceph_vino *)data);
+	return 0;
+}
+
+static inline struct ceph_vino ceph_vino(struct inode *inode)
+{
+	return ceph_inode(inode)->i_vino;
+}
+
+/* for printf-style formatting */
+#define ceph_vinop(i) ceph_inode(i)->i_vino.ino, ceph_inode(i)->i_vino.snap
+
+static inline u64 ceph_ino(struct inode *inode)
+{
+	return ceph_inode(inode)->i_vino.ino;
+}
+static inline u64 ceph_snap(struct inode *inode)
+{
+	return ceph_inode(inode)->i_vino.snap;
+}
+
+static inline int ceph_ino_compare(struct inode *inode, void *data)
+{
+	struct ceph_vino *pvino = (struct ceph_vino *)data;
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	return ci->i_vino.ino == pvino->ino &&
+		ci->i_vino.snap == pvino->snap;
+}
+
+static inline struct inode *ceph_find_inode(struct super_block *sb,
+					    struct ceph_vino vino)
+{
+	ino_t t = ceph_vino_to_ino(vino);
+	return ilookup5(sb, t, ceph_ino_compare, &vino);
+}
+
+
+/*
+ * caps helpers
+ */
+static inline bool __ceph_is_any_real_caps(struct ceph_inode_info *ci)
+{
+	return !RB_EMPTY_ROOT(&ci->i_caps);
+}
+
+extern int __ceph_caps_issued(struct ceph_inode_info *ci, int *implemented);
+extern int __ceph_caps_issued_mask(struct ceph_inode_info *ci, int mask, int t);
+extern int __ceph_caps_issued_other(struct ceph_inode_info *ci,
+				    struct ceph_cap *cap);
+
+static inline int ceph_caps_issued(struct ceph_inode_info *ci)
+{
+	int issued;
+	spin_lock(&ci->vfs_inode.i_lock);
+	issued = __ceph_caps_issued(ci, NULL);
+	spin_unlock(&ci->vfs_inode.i_lock);
+	return issued;
+}
+
+static inline int ceph_caps_issued_mask(struct ceph_inode_info *ci, int mask,
+					int touch)
+{
+	int r;
+	spin_lock(&ci->vfs_inode.i_lock);
+	r = __ceph_caps_issued_mask(ci, mask, touch);
+	spin_unlock(&ci->vfs_inode.i_lock);
+	return r;
+}
+
+static inline int __ceph_caps_dirty(struct ceph_inode_info *ci)
+{
+	return ci->i_dirty_caps | ci->i_flushing_caps;
+}
+extern void __ceph_mark_dirty_caps(struct ceph_inode_info *ci, int mask);
+
+extern int ceph_caps_revoking(struct ceph_inode_info *ci, int mask);
+extern int __ceph_caps_used(struct ceph_inode_info *ci);
+
+extern int __ceph_caps_file_wanted(struct ceph_inode_info *ci);
+
+/*
+ * wanted, by virtue of open file modes AND cap refs (buffered/cached data)
+ */
+static inline int __ceph_caps_wanted(struct ceph_inode_info *ci)
+{
+	int w = __ceph_caps_file_wanted(ci) | __ceph_caps_used(ci);
+	if (w & CEPH_CAP_FILE_BUFFER)
+		w |= CEPH_CAP_FILE_EXCL;  /* we want EXCL if dirty data */
+	return w;
+}
+
+/* what the mds thinks we want */
+extern int __ceph_caps_mds_wanted(struct ceph_inode_info *ci);
+
+extern void ceph_caps_init(void);
+extern void ceph_caps_finalize(void);
+extern void ceph_adjust_min_caps(int delta);
+extern int ceph_reserve_caps(struct ceph_cap_reservation *ctx, int need);
+extern int ceph_unreserve_caps(struct ceph_cap_reservation *ctx);
+extern void ceph_reservation_status(struct ceph_client *client,
+				    int *total, int *avail, int *used,
+				    int *reserved, int *min);
+
+static inline struct ceph_client *ceph_inode_to_client(struct inode *inode)
+{
+	return (struct ceph_client *)inode->i_sb->s_fs_info;
+}
+
+static inline struct ceph_client *ceph_sb_to_client(struct super_block *sb)
+{
+	return (struct ceph_client *)sb->s_fs_info;
+}
+
+
+/*
+ * we keep buffered readdir results attached to file->private_data
+ */
+struct ceph_file_info {
+	int fmode;     /* initialized on open */
+
+	/* readdir: position within the dir */
+	u32 frag;
+	struct ceph_mds_request *last_readdir;
+	int at_end;
+
+	/* readdir: position within a frag */
+	unsigned offset;       /* offset of last chunk, adjusted for . and .. */
+	u64 next_offset;       /* offset of next chunk (last_name's + 1) */
+	char *last_name;       /* last entry in previous chunk */
+	struct dentry *dentry; /* next dentry (for dcache readdir) */
+	unsigned long dir_release_count;
+
+	/* used for -o dirstat read() on directory thing */
+	char *dir_info;
+	int dir_info_len;
+};
+
+
+
+/*
+ * snapshots
+ */
+
+/*
+ * A "snap context" is the set of existing snapshots when we
+ * write data.  It is used by the OSD to guide its COW behavior.
+ *
+ * The ceph_snap_context is refcounted, and attached to each dirty
+ * page, indicating which context the dirty data belonged when it was
+ * dirtied.
+ */
+struct ceph_snap_context {
+	atomic_t nref;
+	u64 seq;
+	int num_snaps;
+	u64 snaps[];
+};
+
+static inline struct ceph_snap_context *
+ceph_get_snap_context(struct ceph_snap_context *sc)
+{
+	/*
+	printk("get_snap_context %p %d -> %d\n", sc, atomic_read(&sc->nref),
+	       atomic_read(&sc->nref)+1);
+	*/
+	if (sc)
+		atomic_inc(&sc->nref);
+	return sc;
+}
+
+static inline void ceph_put_snap_context(struct ceph_snap_context *sc)
+{
+	if (!sc)
+		return;
+	/*
+	printk("put_snap_context %p %d -> %d\n", sc, atomic_read(&sc->nref),
+	       atomic_read(&sc->nref)-1);
+	*/
+	if (atomic_dec_and_test(&sc->nref)) {
+		/*printk(" deleting snap_context %p\n", sc);*/
+		kfree(sc);
+	}
+}
+
+/*
+ * A "snap realm" describes a subset of the file hierarchy sharing
+ * the same set of snapshots that apply to it.  The realms themselves
+ * are organized into a hierarchy, such that children inherit (some of)
+ * the snapshots of their parents.
+ *
+ * All inodes within the realm that have capabilities are linked into a
+ * per-realm list.
+ */
+struct ceph_snap_realm {
+	u64 ino;
+	atomic_t nref;
+	struct rb_node node;
+
+	u64 created, seq;
+	u64 parent_ino;
+	u64 parent_since;   /* snapid when our current parent became so */
+
+	u64 *prior_parent_snaps;      /* snaps inherited from any parents we */
+	int num_prior_parent_snaps;   /*  had prior to parent_since */
+	u64 *snaps;                   /* snaps specific to this realm */
+	int num_snaps;
+
+	struct ceph_snap_realm *parent;
+	struct list_head children;       /* list of child realms */
+	struct list_head child_item;
+
+	struct list_head empty_item;     /* if i have ref==0 */
+
+	/* the current set of snaps for this realm */
+	struct ceph_snap_context *cached_context;
+
+	struct list_head inodes_with_caps;
+	spinlock_t inodes_with_caps_lock;
+};
+
+
+
+/*
+ * calculate the number of pages a given length and offset map onto,
+ * if we align the data.
+ */
+static inline int calc_pages_for(u64 off, u64 len)
+{
+	return ((off+len+PAGE_CACHE_SIZE-1) >> PAGE_CACHE_SHIFT) -
+		(off >> PAGE_CACHE_SHIFT);
+}
+
+
+
+/* snap.c */
+struct ceph_snap_realm *ceph_lookup_snap_realm(struct ceph_mds_client *mdsc,
+					       u64 ino);
+extern void ceph_get_snap_realm(struct ceph_mds_client *mdsc,
+				struct ceph_snap_realm *realm);
+extern void ceph_put_snap_realm(struct ceph_mds_client *mdsc,
+				struct ceph_snap_realm *realm);
+extern int ceph_update_snap_trace(struct ceph_mds_client *m,
+				  void *p, void *e, bool deletion);
+extern void ceph_handle_snap(struct ceph_mds_client *mdsc,
+			     struct ceph_mds_session *session,
+			     struct ceph_msg *msg);
+extern void ceph_queue_cap_snap(struct ceph_inode_info *ci,
+				struct ceph_snap_context *snapc);
+extern int __ceph_finish_cap_snap(struct ceph_inode_info *ci,
+				  struct ceph_cap_snap *capsnap);
+extern void ceph_cleanup_empty_realms(struct ceph_mds_client *mdsc);
+
+/*
+ * a cap_snap is "pending" if it is still awaiting an in-progress
+ * sync write (that may/may not still update size, mtime, etc.).
+ */
+static inline bool __ceph_have_pending_cap_snap(struct ceph_inode_info *ci)
+{
+	return !list_empty(&ci->i_cap_snaps) &&
+		list_entry(ci->i_cap_snaps.prev, struct ceph_cap_snap,
+			   ci_item)->writing;
+}
+
+
+/* super.c */
+extern struct kmem_cache *ceph_inode_cachep;
+extern struct kmem_cache *ceph_cap_cachep;
+extern struct kmem_cache *ceph_dentry_cachep;
+extern struct kmem_cache *ceph_file_cachep;
+
+extern const char *ceph_msg_type_name(int type);
+extern int ceph_check_fsid(struct ceph_client *client, struct ceph_fsid *fsid);
+
+#define FSID_FORMAT "%02x%02x%02x%02x-%02x%02x-%02x%02x-%02x%02x-" \
+	"%02x%02x%02x%02x%02x%02x"
+#define PR_FSID(f) (f)->fsid[0], (f)->fsid[1], (f)->fsid[2], (f)->fsid[3], \
+		(f)->fsid[4], (f)->fsid[5], (f)->fsid[6], (f)->fsid[7],    \
+		(f)->fsid[8], (f)->fsid[9], (f)->fsid[10], (f)->fsid[11],  \
+		(f)->fsid[12], (f)->fsid[13], (f)->fsid[14], (f)->fsid[15]
+
+/* inode.c */
+extern const struct inode_operations ceph_file_iops;
+
+extern struct inode *ceph_alloc_inode(struct super_block *sb);
+extern void ceph_destroy_inode(struct inode *inode);
+
+extern struct inode *ceph_get_inode(struct super_block *sb,
+				    struct ceph_vino vino);
+extern struct inode *ceph_get_snapdir(struct inode *parent);
+extern int ceph_fill_file_size(struct inode *inode, int issued,
+			       u32 truncate_seq, u64 truncate_size, u64 size);
+extern void ceph_fill_file_time(struct inode *inode, int issued,
+				u64 time_warp_seq, struct timespec *ctime,
+				struct timespec *mtime, struct timespec *atime);
+extern int ceph_fill_trace(struct super_block *sb,
+			   struct ceph_mds_request *req,
+			   struct ceph_mds_session *session);
+extern int ceph_readdir_prepopulate(struct ceph_mds_request *req,
+				    struct ceph_mds_session *session);
+
+extern int ceph_inode_holds_cap(struct inode *inode, int mask);
+
+extern int ceph_inode_set_size(struct inode *inode, loff_t size);
+extern void __ceph_do_pending_vmtruncate(struct inode *inode);
+extern void ceph_queue_vmtruncate(struct inode *inode);
+
+extern void ceph_queue_invalidate(struct inode *inode);
+extern void ceph_queue_writeback(struct inode *inode);
+
+extern int ceph_do_getattr(struct inode *inode, int mask);
+extern int ceph_permission(struct inode *inode, int mask);
+extern int ceph_setattr(struct dentry *dentry, struct iattr *attr);
+extern int ceph_getattr(struct vfsmount *mnt, struct dentry *dentry,
+			struct kstat *stat);
+
+/* xattr.c */
+extern int ceph_setxattr(struct dentry *, const char *, const void *,
+			 size_t, int);
+extern ssize_t ceph_getxattr(struct dentry *, const char *, void *, size_t);
+extern ssize_t ceph_listxattr(struct dentry *, char *, size_t);
+extern int ceph_removexattr(struct dentry *, const char *);
+extern void __ceph_build_xattrs_blob(struct ceph_inode_info *ci);
+extern void __ceph_destroy_xattrs(struct ceph_inode_info *ci);
+
+/* caps.c */
+extern const char *ceph_cap_string(int c);
+extern void ceph_handle_caps(struct ceph_mds_session *session,
+			     struct ceph_msg *msg);
+extern int ceph_add_cap(struct inode *inode,
+			struct ceph_mds_session *session, u64 cap_id,
+			int fmode, unsigned issued, unsigned wanted,
+			unsigned cap, unsigned seq, u64 realmino, int flags,
+			struct ceph_cap_reservation *caps_reservation);
+extern void __ceph_remove_cap(struct ceph_cap *cap);
+static inline void ceph_remove_cap(struct ceph_cap *cap)
+{
+	struct inode *inode = &cap->ci->vfs_inode;
+	spin_lock(&inode->i_lock);
+	__ceph_remove_cap(cap);
+	spin_unlock(&inode->i_lock);
+}
+extern void ceph_put_cap(struct ceph_cap *cap);
+
+extern void ceph_queue_caps_release(struct inode *inode);
+extern int ceph_write_inode(struct inode *inode, struct writeback_control *wbc);
+extern int ceph_fsync(struct file *file, struct dentry *dentry, int datasync);
+extern void ceph_kick_flushing_caps(struct ceph_mds_client *mdsc,
+				    struct ceph_mds_session *session);
+extern int ceph_get_cap_mds(struct inode *inode);
+extern void ceph_get_cap_refs(struct ceph_inode_info *ci, int caps);
+extern void ceph_put_cap_refs(struct ceph_inode_info *ci, int had);
+extern void ceph_put_wrbuffer_cap_refs(struct ceph_inode_info *ci, int nr,
+				       struct ceph_snap_context *snapc);
+extern void __ceph_flush_snaps(struct ceph_inode_info *ci,
+			       struct ceph_mds_session **psession);
+extern void ceph_check_caps(struct ceph_inode_info *ci, int flags,
+			    struct ceph_mds_session *session);
+extern void ceph_check_delayed_caps(struct ceph_mds_client *mdsc);
+extern void ceph_flush_dirty_caps(struct ceph_mds_client *mdsc);
+
+extern int ceph_encode_inode_release(void **p, struct inode *inode,
+				     int mds, int drop, int unless, int force);
+extern int ceph_encode_dentry_release(void **p, struct dentry *dn,
+				      int mds, int drop, int unless);
+
+extern int ceph_get_caps(struct ceph_inode_info *ci, int need, int want,
+			 int *got, loff_t endoff);
+
+/* for counting open files by mode */
+static inline void __ceph_get_fmode(struct ceph_inode_info *ci, int mode)
+{
+	ci->i_nr_by_mode[mode]++;
+}
+extern void ceph_put_fmode(struct ceph_inode_info *ci, int mode);
+
+/* addr.c */
+extern const struct address_space_operations ceph_aops;
+extern int ceph_mmap(struct file *file, struct vm_area_struct *vma);
+
+/* file.c */
+extern const struct file_operations ceph_file_fops;
+extern const struct address_space_operations ceph_aops;
+extern int ceph_open(struct inode *inode, struct file *file);
+extern struct dentry *ceph_lookup_open(struct inode *dir, struct dentry *dentry,
+				       struct nameidata *nd, int mode,
+				       int locked_dir);
+extern int ceph_release(struct inode *inode, struct file *filp);
+extern void ceph_release_page_vector(struct page **pages, int num_pages);
+
+/* dir.c */
+extern const struct file_operations ceph_dir_fops;
+extern const struct inode_operations ceph_dir_iops;
+extern struct dentry_operations ceph_dentry_ops, ceph_snap_dentry_ops,
+	ceph_snapdir_dentry_ops;
+
+extern int ceph_handle_notrace_create(struct inode *dir, struct dentry *dentry);
+extern struct dentry *ceph_finish_lookup(struct ceph_mds_request *req,
+					 struct dentry *dentry, int err);
+
+extern void ceph_dentry_lru_add(struct dentry *dn);
+extern void ceph_dentry_lru_touch(struct dentry *dn);
+extern void ceph_dentry_lru_del(struct dentry *dn);
+
+/*
+ * our d_ops vary depending on whether the inode is live,
+ * snapshotted (read-only), or a virtual ".snap" directory.
+ */
+int ceph_init_dentry(struct dentry *dentry);
+
+
+/* ioctl.c */
+extern long ceph_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
+
+/* export.c */
+extern const struct export_operations ceph_export_ops;
+
+/* debugfs.c */
+extern int ceph_debugfs_init(void);
+extern void ceph_debugfs_cleanup(void);
+extern int ceph_debugfs_client_init(struct ceph_client *client);
+extern void ceph_debugfs_client_cleanup(struct ceph_client *client);
+
+static inline struct inode *get_dentry_parent_inode(struct dentry *dentry)
+{
+	if (dentry && dentry->d_parent)
+		return dentry->d_parent->d_inode;
+
+	return NULL;
+}
+
+#endif /* _FS_CEPH_SUPER_H */
diff --git a/fs/ceph/types.h b/fs/ceph/types.h
new file mode 100644
index 000000000000..28b35a005ec2
--- /dev/null
+++ b/fs/ceph/types.h
@@ -0,0 +1,29 @@
+#ifndef _FS_CEPH_TYPES_H
+#define _FS_CEPH_TYPES_H
+
+/* needed before including ceph_fs.h */
+#include <linux/in.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/string.h>
+
+#include "ceph_fs.h"
+#include "ceph_frag.h"
+#include "ceph_hash.h"
+
+/*
+ * Identify inodes by both their ino AND snapshot id (a u64).
+ */
+struct ceph_vino {
+	u64 ino;
+	u64 snap;
+};
+
+
+/* context for the caps reservation mechanism */
+struct ceph_cap_reservation {
+	int count;
+};
+
+
+#endif
diff --git a/fs/ceph/xattr.c b/fs/ceph/xattr.c
new file mode 100644
index 000000000000..37d6ce645691
--- /dev/null
+++ b/fs/ceph/xattr.c
@@ -0,0 +1,844 @@
+#include "ceph_debug.h"
+#include "super.h"
+#include "decode.h"
+
+#include <linux/xattr.h>
+
+static bool ceph_is_valid_xattr(const char *name)
+{
+	return !strncmp(name, XATTR_SECURITY_PREFIX,
+			XATTR_SECURITY_PREFIX_LEN) ||
+	       !strncmp(name, XATTR_TRUSTED_PREFIX, XATTR_TRUSTED_PREFIX_LEN) ||
+	       !strncmp(name, XATTR_USER_PREFIX, XATTR_USER_PREFIX_LEN);
+}
+
+/*
+ * These define virtual xattrs exposing the recursive directory
+ * statistics and layout metadata.
+ */
+struct ceph_vxattr_cb {
+	bool readonly;
+	char *name;
+	size_t (*getxattr_cb)(struct ceph_inode_info *ci, char *val,
+			      size_t size);
+};
+
+/* directories */
+
+static size_t ceph_vxattrcb_entries(struct ceph_inode_info *ci, char *val,
+					size_t size)
+{
+	return snprintf(val, size, "%lld", ci->i_files + ci->i_subdirs);
+}
+
+static size_t ceph_vxattrcb_files(struct ceph_inode_info *ci, char *val,
+				      size_t size)
+{
+	return snprintf(val, size, "%lld", ci->i_files);
+}
+
+static size_t ceph_vxattrcb_subdirs(struct ceph_inode_info *ci, char *val,
+					size_t size)
+{
+	return snprintf(val, size, "%lld", ci->i_subdirs);
+}
+
+static size_t ceph_vxattrcb_rentries(struct ceph_inode_info *ci, char *val,
+					 size_t size)
+{
+	return snprintf(val, size, "%lld", ci->i_rfiles + ci->i_rsubdirs);
+}
+
+static size_t ceph_vxattrcb_rfiles(struct ceph_inode_info *ci, char *val,
+				       size_t size)
+{
+	return snprintf(val, size, "%lld", ci->i_rfiles);
+}
+
+static size_t ceph_vxattrcb_rsubdirs(struct ceph_inode_info *ci, char *val,
+					 size_t size)
+{
+	return snprintf(val, size, "%lld", ci->i_rsubdirs);
+}
+
+static size_t ceph_vxattrcb_rbytes(struct ceph_inode_info *ci, char *val,
+				       size_t size)
+{
+	return snprintf(val, size, "%lld", ci->i_rbytes);
+}
+
+static size_t ceph_vxattrcb_rctime(struct ceph_inode_info *ci, char *val,
+				       size_t size)
+{
+	return snprintf(val, size, "%ld.%ld", (long)ci->i_rctime.tv_sec,
+			(long)ci->i_rctime.tv_nsec);
+}
+
+static struct ceph_vxattr_cb ceph_dir_vxattrs[] = {
+	{ true, "user.ceph.dir.entries", ceph_vxattrcb_entries},
+	{ true, "user.ceph.dir.files", ceph_vxattrcb_files},
+	{ true, "user.ceph.dir.subdirs", ceph_vxattrcb_subdirs},
+	{ true, "user.ceph.dir.rentries", ceph_vxattrcb_rentries},
+	{ true, "user.ceph.dir.rfiles", ceph_vxattrcb_rfiles},
+	{ true, "user.ceph.dir.rsubdirs", ceph_vxattrcb_rsubdirs},
+	{ true, "user.ceph.dir.rbytes", ceph_vxattrcb_rbytes},
+	{ true, "user.ceph.dir.rctime", ceph_vxattrcb_rctime},
+	{ true, NULL, NULL }
+};
+
+/* files */
+
+static size_t ceph_vxattrcb_layout(struct ceph_inode_info *ci, char *val,
+				   size_t size)
+{
+	int ret;
+
+	ret = snprintf(val, size,
+		"chunk_bytes=%lld\nstripe_count=%lld\nobject_size=%lld\n",
+		(unsigned long long)ceph_file_layout_su(ci->i_layout),
+		(unsigned long long)ceph_file_layout_stripe_count(ci->i_layout),
+		(unsigned long long)ceph_file_layout_object_size(ci->i_layout));
+	if (ceph_file_layout_pg_preferred(ci->i_layout))
+		ret += snprintf(val + ret, size, "preferred_osd=%lld\n",
+			    (unsigned long long)ceph_file_layout_pg_preferred(
+				    ci->i_layout));
+	return ret;
+}
+
+static struct ceph_vxattr_cb ceph_file_vxattrs[] = {
+	{ true, "user.ceph.layout", ceph_vxattrcb_layout},
+	{ NULL, NULL }
+};
+
+static struct ceph_vxattr_cb *ceph_inode_vxattrs(struct inode *inode)
+{
+	if (S_ISDIR(inode->i_mode))
+		return ceph_dir_vxattrs;
+	else if (S_ISREG(inode->i_mode))
+		return ceph_file_vxattrs;
+	return NULL;
+}
+
+static struct ceph_vxattr_cb *ceph_match_vxattr(struct ceph_vxattr_cb *vxattr,
+						const char *name)
+{
+	do {
+		if (strcmp(vxattr->name, name) == 0)
+			return vxattr;
+		vxattr++;
+	} while (vxattr->name);
+	return NULL;
+}
+
+static int __set_xattr(struct ceph_inode_info *ci,
+			   const char *name, int name_len,
+			   const char *val, int val_len,
+			   int dirty,
+			   int should_free_name, int should_free_val,
+			   struct ceph_inode_xattr **newxattr)
+{
+	struct rb_node **p;
+	struct rb_node *parent = NULL;
+	struct ceph_inode_xattr *xattr = NULL;
+	int c;
+	int new = 0;
+
+	p = &ci->i_xattrs.index.rb_node;
+	while (*p) {
+		parent = *p;
+		xattr = rb_entry(parent, struct ceph_inode_xattr, node);
+		c = strncmp(name, xattr->name, min(name_len, xattr->name_len));
+		if (c < 0)
+			p = &(*p)->rb_left;
+		else if (c > 0)
+			p = &(*p)->rb_right;
+		else {
+			if (name_len == xattr->name_len)
+				break;
+			else if (name_len < xattr->name_len)
+				p = &(*p)->rb_left;
+			else
+				p = &(*p)->rb_right;
+		}
+		xattr = NULL;
+	}
+
+	if (!xattr) {
+		new = 1;
+		xattr = *newxattr;
+		xattr->name = name;
+		xattr->name_len = name_len;
+		xattr->should_free_name = should_free_name;
+
+		ci->i_xattrs.count++;
+		dout("__set_xattr count=%d\n", ci->i_xattrs.count);
+	} else {
+		kfree(*newxattr);
+		*newxattr = NULL;
+		if (xattr->should_free_val)
+			kfree((void *)xattr->val);
+
+		if (should_free_name) {
+			kfree((void *)name);
+			name = xattr->name;
+		}
+		ci->i_xattrs.names_size -= xattr->name_len;
+		ci->i_xattrs.vals_size -= xattr->val_len;
+	}
+	if (!xattr) {
+		pr_err("__set_xattr ENOMEM on %p %llx.%llx xattr %s=%s\n",
+		       &ci->vfs_inode, ceph_vinop(&ci->vfs_inode), name,
+		       xattr->val);
+		return -ENOMEM;
+	}
+	ci->i_xattrs.names_size += name_len;
+	ci->i_xattrs.vals_size += val_len;
+	if (val)
+		xattr->val = val;
+	else
+		xattr->val = "";
+
+	xattr->val_len = val_len;
+	xattr->dirty = dirty;
+	xattr->should_free_val = (val && should_free_val);
+
+	if (new) {
+		rb_link_node(&xattr->node, parent, p);
+		rb_insert_color(&xattr->node, &ci->i_xattrs.index);
+		dout("__set_xattr_val p=%p\n", p);
+	}
+
+	dout("__set_xattr_val added %llx.%llx xattr %p %s=%.*s\n",
+	     ceph_vinop(&ci->vfs_inode), xattr, name, val_len, val);
+
+	return 0;
+}
+
+static struct ceph_inode_xattr *__get_xattr(struct ceph_inode_info *ci,
+			   const char *name)
+{
+	struct rb_node **p;
+	struct rb_node *parent = NULL;
+	struct ceph_inode_xattr *xattr = NULL;
+	int c;
+
+	p = &ci->i_xattrs.index.rb_node;
+	while (*p) {
+		parent = *p;
+		xattr = rb_entry(parent, struct ceph_inode_xattr, node);
+		c = strncmp(name, xattr->name, xattr->name_len);
+		if (c < 0)
+			p = &(*p)->rb_left;
+		else if (c > 0)
+			p = &(*p)->rb_right;
+		else {
+			dout("__get_xattr %s: found %.*s\n", name,
+			     xattr->val_len, xattr->val);
+			return xattr;
+		}
+	}
+
+	dout("__get_xattr %s: not found\n", name);
+
+	return NULL;
+}
+
+static void __free_xattr(struct ceph_inode_xattr *xattr)
+{
+	BUG_ON(!xattr);
+
+	if (xattr->should_free_name)
+		kfree((void *)xattr->name);
+	if (xattr->should_free_val)
+		kfree((void *)xattr->val);
+
+	kfree(xattr);
+}
+
+static int __remove_xattr(struct ceph_inode_info *ci,
+			  struct ceph_inode_xattr *xattr)
+{
+	if (!xattr)
+		return -EOPNOTSUPP;
+
+	rb_erase(&xattr->node, &ci->i_xattrs.index);
+
+	if (xattr->should_free_name)
+		kfree((void *)xattr->name);
+	if (xattr->should_free_val)
+		kfree((void *)xattr->val);
+
+	ci->i_xattrs.names_size -= xattr->name_len;
+	ci->i_xattrs.vals_size -= xattr->val_len;
+	ci->i_xattrs.count--;
+	kfree(xattr);
+
+	return 0;
+}
+
+static int __remove_xattr_by_name(struct ceph_inode_info *ci,
+			   const char *name)
+{
+	struct rb_node **p;
+	struct ceph_inode_xattr *xattr;
+	int err;
+
+	p = &ci->i_xattrs.index.rb_node;
+	xattr = __get_xattr(ci, name);
+	err = __remove_xattr(ci, xattr);
+	return err;
+}
+
+static char *__copy_xattr_names(struct ceph_inode_info *ci,
+				char *dest)
+{
+	struct rb_node *p;
+	struct ceph_inode_xattr *xattr = NULL;
+
+	p = rb_first(&ci->i_xattrs.index);
+	dout("__copy_xattr_names count=%d\n", ci->i_xattrs.count);
+
+	while (p) {
+		xattr = rb_entry(p, struct ceph_inode_xattr, node);
+		memcpy(dest, xattr->name, xattr->name_len);
+		dest[xattr->name_len] = '\0';
+
+		dout("dest=%s %p (%s) (%d/%d)\n", dest, xattr, xattr->name,
+		     xattr->name_len, ci->i_xattrs.names_size);
+
+		dest += xattr->name_len + 1;
+		p = rb_next(p);
+	}
+
+	return dest;
+}
+
+void __ceph_destroy_xattrs(struct ceph_inode_info *ci)
+{
+	struct rb_node *p, *tmp;
+	struct ceph_inode_xattr *xattr = NULL;
+
+	p = rb_first(&ci->i_xattrs.index);
+
+	dout("__ceph_destroy_xattrs p=%p\n", p);
+
+	while (p) {
+		xattr = rb_entry(p, struct ceph_inode_xattr, node);
+		tmp = p;
+		p = rb_next(tmp);
+		dout("__ceph_destroy_xattrs next p=%p (%.*s)\n", p,
+		     xattr->name_len, xattr->name);
+		rb_erase(tmp, &ci->i_xattrs.index);
+
+		__free_xattr(xattr);
+	}
+
+	ci->i_xattrs.names_size = 0;
+	ci->i_xattrs.vals_size = 0;
+	ci->i_xattrs.index_version = 0;
+	ci->i_xattrs.count = 0;
+	ci->i_xattrs.index = RB_ROOT;
+}
+
+static int __build_xattrs(struct inode *inode)
+{
+	u32 namelen;
+	u32 numattr = 0;
+	void *p, *end;
+	u32 len;
+	const char *name, *val;
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	int xattr_version;
+	struct ceph_inode_xattr **xattrs = NULL;
+	int err = 0;
+	int i;
+
+	dout("__build_xattrs() len=%d\n",
+	     ci->i_xattrs.blob ? (int)ci->i_xattrs.blob->vec.iov_len : 0);
+
+	if (ci->i_xattrs.index_version >= ci->i_xattrs.version)
+		return 0; /* already built */
+
+	__ceph_destroy_xattrs(ci);
+
+start:
+	/* updated internal xattr rb tree */
+	if (ci->i_xattrs.blob && ci->i_xattrs.blob->vec.iov_len > 4) {
+		p = ci->i_xattrs.blob->vec.iov_base;
+		end = p + ci->i_xattrs.blob->vec.iov_len;
+		ceph_decode_32_safe(&p, end, numattr, bad);
+		xattr_version = ci->i_xattrs.version;
+		spin_unlock(&inode->i_lock);
+
+		xattrs = kcalloc(numattr, sizeof(struct ceph_xattr *),
+				 GFP_NOFS);
+		err = -ENOMEM;
+		if (!xattrs)
+			goto bad_lock;
+		memset(xattrs, 0, numattr*sizeof(struct ceph_xattr *));
+		for (i = 0; i < numattr; i++) {
+			xattrs[i] = kmalloc(sizeof(struct ceph_inode_xattr),
+					    GFP_NOFS);
+			if (!xattrs[i])
+				goto bad_lock;
+		}
+
+		spin_lock(&inode->i_lock);
+		if (ci->i_xattrs.version != xattr_version) {
+			/* lost a race, retry */
+			for (i = 0; i < numattr; i++)
+				kfree(xattrs[i]);
+			kfree(xattrs);
+			goto start;
+		}
+		err = -EIO;
+		while (numattr--) {
+			ceph_decode_32_safe(&p, end, len, bad);
+			namelen = len;
+			name = p;
+			p += len;
+			ceph_decode_32_safe(&p, end, len, bad);
+			val = p;
+			p += len;
+
+			err = __set_xattr(ci, name, namelen, val, len,
+					  0, 0, 0, &xattrs[numattr]);
+
+			if (err < 0)
+				goto bad;
+		}
+		kfree(xattrs);
+	}
+	ci->i_xattrs.index_version = ci->i_xattrs.version;
+	ci->i_xattrs.dirty = false;
+
+	return err;
+bad_lock:
+	spin_lock(&inode->i_lock);
+bad:
+	if (xattrs) {
+		for (i = 0; i < numattr; i++)
+			kfree(xattrs[i]);
+		kfree(xattrs);
+	}
+	ci->i_xattrs.names_size = 0;
+	return err;
+}
+
+static int __get_required_blob_size(struct ceph_inode_info *ci, int name_size,
+				    int val_size)
+{
+	/*
+	 * 4 bytes for the length, and additional 4 bytes per each xattr name,
+	 * 4 bytes per each value
+	 */
+	int size = 4 + ci->i_xattrs.count*(4 + 4) +
+			     ci->i_xattrs.names_size +
+			     ci->i_xattrs.vals_size;
+	dout("__get_required_blob_size c=%d names.size=%d vals.size=%d\n",
+	     ci->i_xattrs.count, ci->i_xattrs.names_size,
+	     ci->i_xattrs.vals_size);
+
+	if (name_size)
+		size += 4 + 4 + name_size + val_size;
+
+	return size;
+}
+
+/*
+ * If there are dirty xattrs, reencode xattrs into the prealloc_blob
+ * and swap into place.
+ */
+void __ceph_build_xattrs_blob(struct ceph_inode_info *ci)
+{
+	struct rb_node *p;
+	struct ceph_inode_xattr *xattr = NULL;
+	void *dest;
+
+	dout("__build_xattrs_blob %p\n", &ci->vfs_inode);
+	if (ci->i_xattrs.dirty) {
+		int need = __get_required_blob_size(ci, 0, 0);
+
+		BUG_ON(need > ci->i_xattrs.prealloc_blob->alloc_len);
+
+		p = rb_first(&ci->i_xattrs.index);
+		dest = ci->i_xattrs.prealloc_blob->vec.iov_base;
+
+		ceph_encode_32(&dest, ci->i_xattrs.count);
+		while (p) {
+			xattr = rb_entry(p, struct ceph_inode_xattr, node);
+
+			ceph_encode_32(&dest, xattr->name_len);
+			memcpy(dest, xattr->name, xattr->name_len);
+			dest += xattr->name_len;
+			ceph_encode_32(&dest, xattr->val_len);
+			memcpy(dest, xattr->val, xattr->val_len);
+			dest += xattr->val_len;
+
+			p = rb_next(p);
+		}
+
+		/* adjust buffer len; it may be larger than we need */
+		ci->i_xattrs.prealloc_blob->vec.iov_len =
+			dest - ci->i_xattrs.prealloc_blob->vec.iov_base;
+
+		if (ci->i_xattrs.blob)
+			ceph_buffer_put(ci->i_xattrs.blob);
+		ci->i_xattrs.blob = ci->i_xattrs.prealloc_blob;
+		ci->i_xattrs.prealloc_blob = NULL;
+		ci->i_xattrs.dirty = false;
+	}
+}
+
+ssize_t ceph_getxattr(struct dentry *dentry, const char *name, void *value,
+		      size_t size)
+{
+	struct inode *inode = dentry->d_inode;
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	struct ceph_vxattr_cb *vxattrs = ceph_inode_vxattrs(inode);
+	int err;
+	struct ceph_inode_xattr *xattr;
+	struct ceph_vxattr_cb *vxattr = NULL;
+
+	if (!ceph_is_valid_xattr(name))
+		return -ENODATA;
+
+	/* let's see if a virtual xattr was requested */
+	if (vxattrs)
+		vxattr = ceph_match_vxattr(vxattrs, name);
+
+	spin_lock(&inode->i_lock);
+	dout("getxattr %p ver=%lld index_ver=%lld\n", inode,
+	     ci->i_xattrs.version, ci->i_xattrs.index_version);
+
+	if (__ceph_caps_issued_mask(ci, CEPH_CAP_XATTR_SHARED, 1) &&
+	    (ci->i_xattrs.index_version >= ci->i_xattrs.version)) {
+		goto get_xattr;
+	} else {
+		spin_unlock(&inode->i_lock);
+		/* get xattrs from mds (if we don't already have them) */
+		err = ceph_do_getattr(inode, CEPH_STAT_CAP_XATTR);
+		if (err)
+			return err;
+	}
+
+	spin_lock(&inode->i_lock);
+
+	if (vxattr && vxattr->readonly) {
+		err = vxattr->getxattr_cb(ci, value, size);
+		goto out;
+	}
+
+	err = __build_xattrs(inode);
+	if (err < 0)
+		goto out;
+
+get_xattr:
+	err = -ENODATA;  /* == ENOATTR */
+	xattr = __get_xattr(ci, name);
+	if (!xattr) {
+		if (vxattr)
+			err = vxattr->getxattr_cb(ci, value, size);
+		goto out;
+	}
+
+	err = -ERANGE;
+	if (size && size < xattr->val_len)
+		goto out;
+
+	err = xattr->val_len;
+	if (size == 0)
+		goto out;
+
+	memcpy(value, xattr->val, xattr->val_len);
+
+out:
+	spin_unlock(&inode->i_lock);
+	return err;
+}
+
+ssize_t ceph_listxattr(struct dentry *dentry, char *names, size_t size)
+{
+	struct inode *inode = dentry->d_inode;
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	struct ceph_vxattr_cb *vxattrs = ceph_inode_vxattrs(inode);
+	u32 vir_namelen = 0;
+	u32 namelen;
+	int err;
+	u32 len;
+	int i;
+
+	spin_lock(&inode->i_lock);
+	dout("listxattr %p ver=%lld index_ver=%lld\n", inode,
+	     ci->i_xattrs.version, ci->i_xattrs.index_version);
+
+	if (__ceph_caps_issued_mask(ci, CEPH_CAP_XATTR_SHARED, 1) &&
+	    (ci->i_xattrs.index_version > ci->i_xattrs.version)) {
+		goto list_xattr;
+	} else {
+		spin_unlock(&inode->i_lock);
+		err = ceph_do_getattr(inode, CEPH_STAT_CAP_XATTR);
+		if (err)
+			return err;
+	}
+
+	spin_lock(&inode->i_lock);
+
+	err = __build_xattrs(inode);
+	if (err < 0)
+		goto out;
+
+list_xattr:
+	vir_namelen = 0;
+	/* include virtual dir xattrs */
+	if (vxattrs)
+		for (i = 0; vxattrs[i].name; i++)
+			vir_namelen += strlen(vxattrs[i].name) + 1;
+	/* adding 1 byte per each variable due to the null termination */
+	namelen = vir_namelen + ci->i_xattrs.names_size + ci->i_xattrs.count;
+	err = -ERANGE;
+	if (size && namelen > size)
+		goto out;
+
+	err = namelen;
+	if (size == 0)
+		goto out;
+
+	names = __copy_xattr_names(ci, names);
+
+	/* virtual xattr names, too */
+	if (vxattrs)
+		for (i = 0; vxattrs[i].name; i++) {
+			len = sprintf(names, "%s", vxattrs[i].name);
+			names += len + 1;
+		}
+
+out:
+	spin_unlock(&inode->i_lock);
+	return err;
+}
+
+static int ceph_sync_setxattr(struct dentry *dentry, const char *name,
+			      const char *value, size_t size, int flags)
+{
+	struct ceph_client *client = ceph_client(dentry->d_sb);
+	struct inode *inode = dentry->d_inode;
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	struct inode *parent_inode = dentry->d_parent->d_inode;
+	struct ceph_mds_request *req;
+	struct ceph_mds_client *mdsc = &client->mdsc;
+	int err;
+	int i, nr_pages;
+	struct page **pages = NULL;
+	void *kaddr;
+
+	/* copy value into some pages */
+	nr_pages = calc_pages_for(0, size);
+	if (nr_pages) {
+		pages = kmalloc(sizeof(pages[0])*nr_pages, GFP_NOFS);
+		if (!pages)
+			return -ENOMEM;
+		err = -ENOMEM;
+		for (i = 0; i < nr_pages; i++) {
+			pages[i] = alloc_page(GFP_NOFS);
+			if (!pages[i]) {
+				nr_pages = i;
+				goto out;
+			}
+			kaddr = kmap(pages[i]);
+			memcpy(kaddr, value + i*PAGE_CACHE_SIZE,
+			       min(PAGE_CACHE_SIZE, size-i*PAGE_CACHE_SIZE));
+		}
+	}
+
+	dout("setxattr value=%.*s\n", (int)size, value);
+
+	/* do request */
+	req = ceph_mdsc_create_request(mdsc, CEPH_MDS_OP_SETXATTR,
+				       USE_AUTH_MDS);
+	if (IS_ERR(req)) {
+		err = PTR_ERR(req);
+		goto out;
+	}
+	req->r_inode = igrab(inode);
+	req->r_inode_drop = CEPH_CAP_XATTR_SHARED;
+	req->r_num_caps = 1;
+	req->r_args.setxattr.flags = cpu_to_le32(flags);
+	req->r_path2 = kstrdup(name, GFP_NOFS);
+
+	req->r_pages = pages;
+	req->r_num_pages = nr_pages;
+	req->r_data_len = size;
+
+	dout("xattr.ver (before): %lld\n", ci->i_xattrs.version);
+	err = ceph_mdsc_do_request(mdsc, parent_inode, req);
+	ceph_mdsc_put_request(req);
+	dout("xattr.ver (after): %lld\n", ci->i_xattrs.version);
+
+out:
+	if (pages) {
+		for (i = 0; i < nr_pages; i++)
+			__free_page(pages[i]);
+		kfree(pages);
+	}
+	return err;
+}
+
+int ceph_setxattr(struct dentry *dentry, const char *name,
+		  const void *value, size_t size, int flags)
+{
+	struct inode *inode = dentry->d_inode;
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	struct ceph_vxattr_cb *vxattrs = ceph_inode_vxattrs(inode);
+	int err;
+	int name_len = strlen(name);
+	int val_len = size;
+	char *newname = NULL;
+	char *newval = NULL;
+	struct ceph_inode_xattr *xattr = NULL;
+	int issued;
+	int required_blob_size;
+
+	if (ceph_snap(inode) != CEPH_NOSNAP)
+		return -EROFS;
+
+	if (!ceph_is_valid_xattr(name))
+		return -EOPNOTSUPP;
+
+	if (vxattrs) {
+		struct ceph_vxattr_cb *vxattr =
+			ceph_match_vxattr(vxattrs, name);
+		if (vxattr && vxattr->readonly)
+			return -EOPNOTSUPP;
+	}
+
+	/* preallocate memory for xattr name, value, index node */
+	err = -ENOMEM;
+	newname = kmalloc(name_len + 1, GFP_NOFS);
+	if (!newname)
+		goto out;
+	memcpy(newname, name, name_len + 1);
+
+	if (val_len) {
+		newval = kmalloc(val_len + 1, GFP_NOFS);
+		if (!newval)
+			goto out;
+		memcpy(newval, value, val_len);
+		newval[val_len] = '\0';
+	}
+
+	xattr = kmalloc(sizeof(struct ceph_inode_xattr), GFP_NOFS);
+	if (!xattr)
+		goto out;
+
+	spin_lock(&inode->i_lock);
+retry:
+	issued = __ceph_caps_issued(ci, NULL);
+	if (!(issued & CEPH_CAP_XATTR_EXCL))
+		goto do_sync;
+	__build_xattrs(inode);
+
+	required_blob_size = __get_required_blob_size(ci, name_len, val_len);
+
+	if (!ci->i_xattrs.prealloc_blob ||
+	    required_blob_size > ci->i_xattrs.prealloc_blob->alloc_len) {
+		struct ceph_buffer *blob = NULL;
+
+		spin_unlock(&inode->i_lock);
+		dout(" preaallocating new blob size=%d\n", required_blob_size);
+		blob = ceph_buffer_new(required_blob_size, GFP_NOFS);
+		if (!blob)
+			goto out;
+		spin_lock(&inode->i_lock);
+		if (ci->i_xattrs.prealloc_blob)
+			ceph_buffer_put(ci->i_xattrs.prealloc_blob);
+		ci->i_xattrs.prealloc_blob = blob;
+		goto retry;
+	}
+
+	dout("setxattr %p issued %s\n", inode, ceph_cap_string(issued));
+	err = __set_xattr(ci, newname, name_len, newval,
+			  val_len, 1, 1, 1, &xattr);
+	__ceph_mark_dirty_caps(ci, CEPH_CAP_XATTR_EXCL);
+	ci->i_xattrs.dirty = true;
+	inode->i_ctime = CURRENT_TIME;
+	spin_unlock(&inode->i_lock);
+
+	return err;
+
+do_sync:
+	spin_unlock(&inode->i_lock);
+	err = ceph_sync_setxattr(dentry, name, value, size, flags);
+out:
+	kfree(newname);
+	kfree(newval);
+	kfree(xattr);
+	return err;
+}
+
+static int ceph_send_removexattr(struct dentry *dentry, const char *name)
+{
+	struct ceph_client *client = ceph_client(dentry->d_sb);
+	struct ceph_mds_client *mdsc = &client->mdsc;
+	struct inode *inode = dentry->d_inode;
+	struct inode *parent_inode = dentry->d_parent->d_inode;
+	struct ceph_mds_request *req;
+	int err;
+
+	req = ceph_mdsc_create_request(mdsc, CEPH_MDS_OP_RMXATTR,
+				       USE_AUTH_MDS);
+	if (IS_ERR(req))
+		return PTR_ERR(req);
+	req->r_inode = igrab(inode);
+	req->r_inode_drop = CEPH_CAP_XATTR_SHARED;
+	req->r_num_caps = 1;
+	req->r_path2 = kstrdup(name, GFP_NOFS);
+
+	err = ceph_mdsc_do_request(mdsc, parent_inode, req);
+	ceph_mdsc_put_request(req);
+	return err;
+}
+
+int ceph_removexattr(struct dentry *dentry, const char *name)
+{
+	struct inode *inode = dentry->d_inode;
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	struct ceph_vxattr_cb *vxattrs = ceph_inode_vxattrs(inode);
+	int issued;
+	int err;
+
+	if (ceph_snap(inode) != CEPH_NOSNAP)
+		return -EROFS;
+
+	if (!ceph_is_valid_xattr(name))
+		return -EOPNOTSUPP;
+
+	if (vxattrs) {
+		struct ceph_vxattr_cb *vxattr =
+			ceph_match_vxattr(vxattrs, name);
+		if (vxattr && vxattr->readonly)
+			return -EOPNOTSUPP;
+	}
+
+	spin_lock(&inode->i_lock);
+	__build_xattrs(inode);
+	issued = __ceph_caps_issued(ci, NULL);
+	dout("removexattr %p issued %s\n", inode, ceph_cap_string(issued));
+
+	if (!(issued & CEPH_CAP_XATTR_EXCL))
+		goto do_sync;
+
+	err = __remove_xattr_by_name(ceph_inode(inode), name);
+	__ceph_mark_dirty_caps(ci, CEPH_CAP_XATTR_EXCL);
+	ci->i_xattrs.dirty = true;
+	inode->i_ctime = CURRENT_TIME;
+
+	spin_unlock(&inode->i_lock);
+
+	return err;
+do_sync:
+	spin_unlock(&inode->i_lock);
+	err = ceph_send_removexattr(dentry, name);
+	return err;
+}
+
diff --git a/fs/cifs/asn1.c b/fs/cifs/asn1.c
index 20692fbfdb24..a20bea598933 100644
--- a/fs/cifs/asn1.c
+++ b/fs/cifs/asn1.c
@@ -136,7 +136,7 @@ asn1_enum_decode(struct asn1_ctx *ctx, __le32 *val)
 		return 0;
 	}
 
-	ch = *(ctx->pointer)++; /* ch has 0xa, ptr points to lenght octet */
+	ch = *(ctx->pointer)++; /* ch has 0xa, ptr points to length octet */
 	if ((ch) == ASN1_ENUM)  /* if ch value is ENUM, 0xa */
 		*val = *(++(ctx->pointer)); /* value has enum value */
 	else
diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c
index b44ce0a0711c..b1d61d0bdfc7 100644
--- a/fs/cifs/cifs_dfs_ref.c
+++ b/fs/cifs/cifs_dfs_ref.c
@@ -54,7 +54,7 @@ void cifs_dfs_release_automount_timer(void)
  * Extracts sharename form full UNC.
  * i.e. strips from UNC trailing path that is not part of share
  * name and fixup missing '\' in the begining of DFS node refferal
- * if neccessary.
+ * if necessary.
  * Returns pointer to share name on success or ERR_PTR on error.
  * Caller is responsible for freeing returned string.
  */
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 8c6a03627176..5183bc2a1916 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -312,6 +312,7 @@ cifs_alloc_inode(struct super_block *sb)
 	cifs_inode->clientCanCacheRead = false;
 	cifs_inode->clientCanCacheAll = false;
 	cifs_inode->delete_pending = false;
+	cifs_inode->invalid_mapping = false;
 	cifs_inode->vfs_inode.i_blkbits = 14;  /* 2**14 = CIFS_MAX_MSGSIZE */
 	cifs_inode->server_eof = 0;
 
@@ -638,7 +639,7 @@ static loff_t cifs_llseek(struct file *file, loff_t offset, int origin)
 		   setting the revalidate time to zero */
 		CIFS_I(file->f_path.dentry->d_inode)->time = 0;
 
-		retval = cifs_revalidate(file->f_path.dentry);
+		retval = cifs_revalidate_file(file);
 		if (retval < 0)
 			return (loff_t)retval;
 	}
diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h
index 78c1b86d55f6..7aa57ecdc437 100644
--- a/fs/cifs/cifsfs.h
+++ b/fs/cifs/cifsfs.h
@@ -61,7 +61,8 @@ extern int cifs_mkdir(struct inode *, struct dentry *, int);
 extern int cifs_rmdir(struct inode *, struct dentry *);
 extern int cifs_rename(struct inode *, struct dentry *, struct inode *,
 		       struct dentry *);
-extern int cifs_revalidate(struct dentry *);
+extern int cifs_revalidate_file(struct file *filp);
+extern int cifs_revalidate_dentry(struct dentry *);
 extern int cifs_getattr(struct vfsmount *, struct dentry *, struct kstat *);
 extern int cifs_setattr(struct dentry *, struct iattr *);
 
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index a1c817eb291a..63c89d1d70b5 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -389,6 +389,7 @@ struct cifsInodeInfo {
 	bool clientCanCacheRead:1;	/* read oplock */
 	bool clientCanCacheAll:1;	/* read and writebehind oplock */
 	bool delete_pending:1;		/* DELETE_ON_CLOSE is set */
+	bool invalid_mapping:1;		/* pagecache is invalid */
 	u64  server_eof;		/* current file size on server */
 	u64  uniqueid;			/* server inode number */
 	struct inode vfs_inode;
diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index 88e2bc44ac58..39e47f46dea5 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -104,10 +104,12 @@ extern void cifs_fattr_to_inode(struct inode *inode, struct cifs_fattr *fattr);
 extern struct inode *cifs_iget(struct super_block *sb,
 			       struct cifs_fattr *fattr);
 
+extern int cifs_get_file_info(struct file *filp);
 extern int cifs_get_inode_info(struct inode **pinode,
 			const unsigned char *search_path,
 			FILE_ALL_INFO *pfile_info,
 			struct super_block *sb, int xid, const __u16 *pfid);
+extern int cifs_get_file_info_unix(struct file *filp);
 extern int cifs_get_inode_info_unix(struct inode **pinode,
 			const unsigned char *search_path,
 			struct super_block *sb, int xid);
@@ -142,6 +144,8 @@ extern int CIFSFindNext(const int xid, struct cifsTconInfo *tcon,
 extern int CIFSFindClose(const int, struct cifsTconInfo *tcon,
 			const __u16 search_handle);
 
+extern int CIFSSMBQFileInfo(const int xid, struct cifsTconInfo *tcon,
+			u16 netfid, FILE_ALL_INFO *pFindData);
 extern int CIFSSMBQPathInfo(const int xid, struct cifsTconInfo *tcon,
 			const unsigned char *searchName,
 			FILE_ALL_INFO *findData,
@@ -152,6 +156,8 @@ extern int SMBQueryInformation(const int xid, struct cifsTconInfo *tcon,
 			FILE_ALL_INFO *findData,
 			const struct nls_table *nls_codepage, int remap);
 
+extern int CIFSSMBUnixQFileInfo(const int xid, struct cifsTconInfo *tcon,
+			u16 netfid, FILE_UNIX_BASIC_INFO *pFindData);
 extern int CIFSSMBUnixQPathInfo(const int xid,
 			struct cifsTconInfo *tcon,
 			const unsigned char *searchName,
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index 9d17df3e0768..7cc7f83e9314 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -500,7 +500,7 @@ CIFSSMBNegotiate(unsigned int xid, struct cifsSesInfo *ses)
 	} else if (pSMBr->hdr.WordCount == 13) {
 		cERROR(1, ("mount failed, cifs module not built "
 			  "with CIFS_WEAK_PW_HASH support"));
-			rc = -EOPNOTSUPP;
+		rc = -EOPNOTSUPP;
 #endif /* WEAK_PW_HASH */
 		goto neg_err_exit;
 	} else if (pSMBr->hdr.WordCount != 17) {
@@ -3230,8 +3230,72 @@ QInfRetry:
 	return rc;
 }
 
+int
+CIFSSMBQFileInfo(const int xid, struct cifsTconInfo *tcon,
+		 u16 netfid, FILE_ALL_INFO *pFindData)
+{
+	struct smb_t2_qfi_req *pSMB = NULL;
+	struct smb_t2_qfi_rsp *pSMBr = NULL;
+	int rc = 0;
+	int bytes_returned;
+	__u16 params, byte_count;
 
+QFileInfoRetry:
+	rc = smb_init(SMB_COM_TRANSACTION2, 15, tcon, (void **) &pSMB,
+		      (void **) &pSMBr);
+	if (rc)
+		return rc;
 
+	params = 2 /* level */ + 2 /* fid */;
+	pSMB->t2.TotalDataCount = 0;
+	pSMB->t2.MaxParameterCount = cpu_to_le16(4);
+	/* BB find exact max data count below from sess structure BB */
+	pSMB->t2.MaxDataCount = cpu_to_le16(CIFSMaxBufSize);
+	pSMB->t2.MaxSetupCount = 0;
+	pSMB->t2.Reserved = 0;
+	pSMB->t2.Flags = 0;
+	pSMB->t2.Timeout = 0;
+	pSMB->t2.Reserved2 = 0;
+	pSMB->t2.ParameterOffset = cpu_to_le16(offsetof(struct smb_t2_qfi_req,
+					       Fid) - 4);
+	pSMB->t2.DataCount = 0;
+	pSMB->t2.DataOffset = 0;
+	pSMB->t2.SetupCount = 1;
+	pSMB->t2.Reserved3 = 0;
+	pSMB->t2.SubCommand = cpu_to_le16(TRANS2_QUERY_FILE_INFORMATION);
+	byte_count = params + 1 /* pad */ ;
+	pSMB->t2.TotalParameterCount = cpu_to_le16(params);
+	pSMB->t2.ParameterCount = pSMB->t2.TotalParameterCount;
+	pSMB->InformationLevel = cpu_to_le16(SMB_QUERY_FILE_ALL_INFO);
+	pSMB->Pad = 0;
+	pSMB->Fid = netfid;
+	pSMB->hdr.smb_buf_length += byte_count;
+
+	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
+			 (struct smb_hdr *) pSMBr, &bytes_returned, 0);
+	if (rc) {
+		cFYI(1, ("Send error in QPathInfo = %d", rc));
+	} else {		/* decode response */
+		rc = validate_t2((struct smb_t2_rsp *)pSMBr);
+
+		if (rc) /* BB add auto retry on EOPNOTSUPP? */
+			rc = -EIO;
+		else if (pSMBr->ByteCount < 40)
+			rc = -EIO;	/* bad smb */
+		else if (pFindData) {
+			__u16 data_offset = le16_to_cpu(pSMBr->t2.DataOffset);
+			memcpy((char *) pFindData,
+			       (char *) &pSMBr->hdr.Protocol +
+			       data_offset, sizeof(FILE_ALL_INFO));
+		} else
+		    rc = -ENOMEM;
+	}
+	cifs_buf_release(pSMB);
+	if (rc == -EAGAIN)
+		goto QFileInfoRetry;
+
+	return rc;
+}
 
 int
 CIFSSMBQPathInfo(const int xid, struct cifsTconInfo *tcon,
@@ -3335,6 +3399,75 @@ QPathInfoRetry:
 }
 
 int
+CIFSSMBUnixQFileInfo(const int xid, struct cifsTconInfo *tcon,
+		 u16 netfid, FILE_UNIX_BASIC_INFO *pFindData)
+{
+	struct smb_t2_qfi_req *pSMB = NULL;
+	struct smb_t2_qfi_rsp *pSMBr = NULL;
+	int rc = 0;
+	int bytes_returned;
+	__u16 params, byte_count;
+
+UnixQFileInfoRetry:
+	rc = smb_init(SMB_COM_TRANSACTION2, 15, tcon, (void **) &pSMB,
+		      (void **) &pSMBr);
+	if (rc)
+		return rc;
+
+	params = 2 /* level */ + 2 /* fid */;
+	pSMB->t2.TotalDataCount = 0;
+	pSMB->t2.MaxParameterCount = cpu_to_le16(4);
+	/* BB find exact max data count below from sess structure BB */
+	pSMB->t2.MaxDataCount = cpu_to_le16(CIFSMaxBufSize);
+	pSMB->t2.MaxSetupCount = 0;
+	pSMB->t2.Reserved = 0;
+	pSMB->t2.Flags = 0;
+	pSMB->t2.Timeout = 0;
+	pSMB->t2.Reserved2 = 0;
+	pSMB->t2.ParameterOffset = cpu_to_le16(offsetof(struct smb_t2_qfi_req,
+					       Fid) - 4);
+	pSMB->t2.DataCount = 0;
+	pSMB->t2.DataOffset = 0;
+	pSMB->t2.SetupCount = 1;
+	pSMB->t2.Reserved3 = 0;
+	pSMB->t2.SubCommand = cpu_to_le16(TRANS2_QUERY_FILE_INFORMATION);
+	byte_count = params + 1 /* pad */ ;
+	pSMB->t2.TotalParameterCount = cpu_to_le16(params);
+	pSMB->t2.ParameterCount = pSMB->t2.TotalParameterCount;
+	pSMB->InformationLevel = cpu_to_le16(SMB_QUERY_FILE_UNIX_BASIC);
+	pSMB->Pad = 0;
+	pSMB->Fid = netfid;
+	pSMB->hdr.smb_buf_length += byte_count;
+
+	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
+			 (struct smb_hdr *) pSMBr, &bytes_returned, 0);
+	if (rc) {
+		cFYI(1, ("Send error in QPathInfo = %d", rc));
+	} else {		/* decode response */
+		rc = validate_t2((struct smb_t2_rsp *)pSMBr);
+
+		if (rc || (pSMBr->ByteCount < sizeof(FILE_UNIX_BASIC_INFO))) {
+			cERROR(1, ("Malformed FILE_UNIX_BASIC_INFO response.\n"
+				   "Unix Extensions can be disabled on mount "
+				   "by specifying the nosfu mount option."));
+			rc = -EIO;	/* bad smb */
+		} else {
+			__u16 data_offset = le16_to_cpu(pSMBr->t2.DataOffset);
+			memcpy((char *) pFindData,
+			       (char *) &pSMBr->hdr.Protocol +
+			       data_offset,
+			       sizeof(FILE_UNIX_BASIC_INFO));
+		}
+	}
+
+	cifs_buf_release(pSMB);
+	if (rc == -EAGAIN)
+		goto UnixQFileInfoRetry;
+
+	return rc;
+}
+
+int
 CIFSSMBUnixQPathInfo(const int xid, struct cifsTconInfo *tcon,
 		     const unsigned char *searchName,
 		     FILE_UNIX_BASIC_INFO *pFindData,
@@ -3886,7 +4019,7 @@ parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr,
 		goto parse_DFS_referrals_exit;
 	}
 
-	/* collect neccessary data from referrals */
+	/* collect necessary data from referrals */
 	for (i = 0; i < *num_of_nodes; i++) {
 		char *temp;
 		int max_len;
diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index 6ccf7262d1b7..e9f7ecc2714b 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -739,7 +739,7 @@ cifs_d_revalidate(struct dentry *direntry, struct nameidata *nd)
 	int isValid = 1;
 
 	if (direntry->d_inode) {
-		if (cifs_revalidate(direntry))
+		if (cifs_revalidate_dentry(direntry))
 			return 0;
 	} else {
 		cFYI(1, ("neg dentry 0x%p name = %s",
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 3d8f8a96f5a3..ca2ba7a0193c 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -219,8 +219,8 @@ static inline int cifs_open_inode_helper(struct inode *inode, struct file *file,
 		cFYI(1, ("inode unchanged on server"));
 	} else {
 		if (file->f_path.dentry->d_inode->i_mapping) {
-		/* BB no need to lock inode until after invalidate
-		   since namei code should already have it locked? */
+			/* BB no need to lock inode until after invalidate
+			since namei code should already have it locked? */
 			rc = filemap_write_and_wait(file->f_path.dentry->d_inode->i_mapping);
 			if (rc != 0)
 				CIFS_I(file->f_path.dentry->d_inode)->write_behind_rc = rc;
@@ -1890,11 +1890,10 @@ static ssize_t cifs_read(struct file *file, char *read_data, size_t read_size,
 
 int cifs_file_mmap(struct file *file, struct vm_area_struct *vma)
 {
-	struct dentry *dentry = file->f_path.dentry;
 	int rc, xid;
 
 	xid = GetXid();
-	rc = cifs_revalidate(dentry);
+	rc = cifs_revalidate_file(file);
 	if (rc) {
 		cFYI(1, ("Validation prior to mmap failed, error=%d", rc));
 		FreeXid(xid);
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index 8bdbc818164c..723daaccbd0e 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -77,6 +77,41 @@ static void cifs_set_ops(struct inode *inode, const bool is_dfs_referral)
 	}
 }
 
+/* check inode attributes against fattr. If they don't match, tag the
+ * inode for cache invalidation
+ */
+static void
+cifs_revalidate_cache(struct inode *inode, struct cifs_fattr *fattr)
+{
+	struct cifsInodeInfo *cifs_i = CIFS_I(inode);
+
+	cFYI(1, ("%s: revalidating inode %llu", __func__, cifs_i->uniqueid));
+
+	if (inode->i_state & I_NEW) {
+		cFYI(1, ("%s: inode %llu is new", __func__, cifs_i->uniqueid));
+		return;
+	}
+
+	/* don't bother with revalidation if we have an oplock */
+	if (cifs_i->clientCanCacheRead) {
+		cFYI(1, ("%s: inode %llu is oplocked", __func__,
+			 cifs_i->uniqueid));
+		return;
+	}
+
+	 /* revalidate if mtime or size have changed */
+	if (timespec_equal(&inode->i_mtime, &fattr->cf_mtime) &&
+	    cifs_i->server_eof == fattr->cf_eof) {
+		cFYI(1, ("%s: inode %llu is unchanged", __func__,
+			 cifs_i->uniqueid));
+		return;
+	}
+
+	cFYI(1, ("%s: invalidating inode %llu mapping", __func__,
+		 cifs_i->uniqueid));
+	cifs_i->invalid_mapping = true;
+}
+
 /* populate an inode with info from a cifs_fattr struct */
 void
 cifs_fattr_to_inode(struct inode *inode, struct cifs_fattr *fattr)
@@ -85,6 +120,8 @@ cifs_fattr_to_inode(struct inode *inode, struct cifs_fattr *fattr)
 	struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
 	unsigned long oldtime = cifs_i->time;
 
+	cifs_revalidate_cache(inode, fattr);
+
 	inode->i_atime = fattr->cf_atime;
 	inode->i_mtime = fattr->cf_mtime;
 	inode->i_ctime = fattr->cf_ctime;
@@ -231,6 +268,31 @@ cifs_create_dfs_fattr(struct cifs_fattr *fattr, struct super_block *sb)
 	fattr->cf_flags |= CIFS_FATTR_DFS_REFERRAL;
 }
 
+int cifs_get_file_info_unix(struct file *filp)
+{
+	int rc;
+	int xid;
+	FILE_UNIX_BASIC_INFO find_data;
+	struct cifs_fattr fattr;
+	struct inode *inode = filp->f_path.dentry->d_inode;
+	struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
+	struct cifsTconInfo *tcon = cifs_sb->tcon;
+	struct cifsFileInfo *cfile = (struct cifsFileInfo *) filp->private_data;
+
+	xid = GetXid();
+	rc = CIFSSMBUnixQFileInfo(xid, tcon, cfile->netfid, &find_data);
+	if (!rc) {
+		cifs_unix_basic_to_fattr(&fattr, &find_data, cifs_sb);
+	} else if (rc == -EREMOTE) {
+		cifs_create_dfs_fattr(&fattr, inode->i_sb);
+		rc = 0;
+	}
+
+	cifs_fattr_to_inode(inode, &fattr);
+	FreeXid(xid);
+	return rc;
+}
+
 int cifs_get_inode_info_unix(struct inode **pinode,
 			     const unsigned char *full_path,
 			     struct super_block *sb, int xid)
@@ -432,6 +494,47 @@ cifs_all_info_to_fattr(struct cifs_fattr *fattr, FILE_ALL_INFO *info,
 	fattr->cf_gid = cifs_sb->mnt_gid;
 }
 
+int cifs_get_file_info(struct file *filp)
+{
+	int rc;
+	int xid;
+	FILE_ALL_INFO find_data;
+	struct cifs_fattr fattr;
+	struct inode *inode = filp->f_path.dentry->d_inode;
+	struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
+	struct cifsTconInfo *tcon = cifs_sb->tcon;
+	struct cifsFileInfo *cfile = (struct cifsFileInfo *) filp->private_data;
+
+	xid = GetXid();
+	rc = CIFSSMBQFileInfo(xid, tcon, cfile->netfid, &find_data);
+	if (rc == -EOPNOTSUPP || rc == -EINVAL) {
+		/*
+		 * FIXME: legacy server -- fall back to path-based call?
+		 * for now, just skip revalidating and mark inode for
+		 * immediate reval.
+		 */
+		rc = 0;
+		CIFS_I(inode)->time = 0;
+		goto cgfi_exit;
+	} else if (rc == -EREMOTE) {
+		cifs_create_dfs_fattr(&fattr, inode->i_sb);
+		rc = 0;
+	} else if (rc)
+		goto cgfi_exit;
+
+	/*
+	 * don't bother with SFU junk here -- just mark inode as needing
+	 * revalidation.
+	 */
+	cifs_all_info_to_fattr(&fattr, &find_data, cifs_sb, false);
+	fattr.cf_uniqueid = CIFS_I(inode)->uniqueid;
+	fattr.cf_flags |= CIFS_FATTR_NEED_REVAL;
+	cifs_fattr_to_inode(inode, &fattr);
+cgfi_exit:
+	FreeXid(xid);
+	return rc;
+}
+
 int cifs_get_inode_info(struct inode **pinode,
 	const unsigned char *full_path, FILE_ALL_INFO *pfindData,
 	struct super_block *sb, int xid, const __u16 *pfid)
@@ -1389,135 +1492,103 @@ cifs_rename_exit:
 	return rc;
 }
 
-int cifs_revalidate(struct dentry *direntry)
+static bool
+cifs_inode_needs_reval(struct inode *inode)
 {
-	int xid;
-	int rc = 0, wbrc = 0;
-	char *full_path;
-	struct cifs_sb_info *cifs_sb;
-	struct cifsInodeInfo *cifsInode;
-	loff_t local_size;
-	struct timespec local_mtime;
-	bool invalidate_inode = false;
+	struct cifsInodeInfo *cifs_i = CIFS_I(inode);
 
-	if (direntry->d_inode == NULL)
-		return -ENOENT;
+	if (cifs_i->clientCanCacheRead)
+		return false;
 
-	cifsInode = CIFS_I(direntry->d_inode);
+	if (!lookupCacheEnabled)
+		return true;
 
-	if (cifsInode == NULL)
-		return -ENOENT;
+	if (cifs_i->time == 0)
+		return true;
 
-	/* no sense revalidating inode info on file that no one can write */
-	if (CIFS_I(direntry->d_inode)->clientCanCacheRead)
-		return rc;
+	/* FIXME: the actimeo should be tunable */
+	if (time_after_eq(jiffies, cifs_i->time + HZ))
+		return true;
+
+	return false;
+}
+
+/* check invalid_mapping flag and zap the cache if it's set */
+static void
+cifs_invalidate_mapping(struct inode *inode)
+{
+	int rc;
+	struct cifsInodeInfo *cifs_i = CIFS_I(inode);
+
+	cifs_i->invalid_mapping = false;
+
+	/* write back any cached data */
+	if (inode->i_mapping && inode->i_mapping->nrpages != 0) {
+		rc = filemap_write_and_wait(inode->i_mapping);
+		if (rc)
+			cifs_i->write_behind_rc = rc;
+	}
+	invalidate_remote_inode(inode);
+}
+
+int cifs_revalidate_file(struct file *filp)
+{
+	int rc = 0;
+	struct inode *inode = filp->f_path.dentry->d_inode;
+
+	if (!cifs_inode_needs_reval(inode))
+		goto check_inval;
+
+	if (CIFS_SB(inode->i_sb)->tcon->unix_ext)
+		rc = cifs_get_file_info_unix(filp);
+	else
+		rc = cifs_get_file_info(filp);
+
+check_inval:
+	if (CIFS_I(inode)->invalid_mapping)
+		cifs_invalidate_mapping(inode);
+
+	return rc;
+}
+
+/* revalidate a dentry's inode attributes */
+int cifs_revalidate_dentry(struct dentry *dentry)
+{
+	int xid;
+	int rc = 0;
+	char *full_path = NULL;
+	struct inode *inode = dentry->d_inode;
+	struct super_block *sb = dentry->d_sb;
+
+	if (inode == NULL)
+		return -ENOENT;
 
 	xid = GetXid();
 
-	cifs_sb = CIFS_SB(direntry->d_sb);
+	if (!cifs_inode_needs_reval(inode))
+		goto check_inval;
 
 	/* can not safely grab the rename sem here if rename calls revalidate
 	   since that would deadlock */
-	full_path = build_path_from_dentry(direntry);
+	full_path = build_path_from_dentry(dentry);
 	if (full_path == NULL) {
 		rc = -ENOMEM;
-		FreeXid(xid);
-		return rc;
-	}
-	cFYI(1, ("Revalidate: %s inode 0x%p count %d dentry: 0x%p d_time %ld "
-		 "jiffies %ld", full_path, direntry->d_inode,
-		 direntry->d_inode->i_count.counter, direntry,
-		 direntry->d_time, jiffies));
-
-	if (cifsInode->time == 0) {
-		/* was set to zero previously to force revalidate */
-	} else if (time_before(jiffies, cifsInode->time + HZ) &&
-		   lookupCacheEnabled) {
-		if ((S_ISREG(direntry->d_inode->i_mode) == 0) ||
-		    (direntry->d_inode->i_nlink == 1)) {
-			kfree(full_path);
-			FreeXid(xid);
-			return rc;
-		} else {
-			cFYI(1, ("Have to revalidate file due to hardlinks"));
-		}
-	}
-
-	/* save mtime and size */
-	local_mtime = direntry->d_inode->i_mtime;
-	local_size = direntry->d_inode->i_size;
-
-	if (cifs_sb->tcon->unix_ext) {
-		rc = cifs_get_inode_info_unix(&direntry->d_inode, full_path,
-					      direntry->d_sb, xid);
-		if (rc) {
-			cFYI(1, ("error on getting revalidate info %d", rc));
-/*			if (rc != -ENOENT)
-				rc = 0; */	/* BB should we cache info on
-						   certain errors? */
-		}
-	} else {
-		rc = cifs_get_inode_info(&direntry->d_inode, full_path, NULL,
-					 direntry->d_sb, xid, NULL);
-		if (rc) {
-			cFYI(1, ("error on getting revalidate info %d", rc));
-/*			if (rc != -ENOENT)
-				rc = 0; */	/* BB should we cache info on
-						   certain errors? */
-		}
+		goto check_inval;
 	}
-	/* should we remap certain errors, access denied?, to zero */
 
-	/* if not oplocked, we invalidate inode pages if mtime or file size
-	   had changed on server */
+	cFYI(1, ("Revalidate: %s inode 0x%p count %d dentry: 0x%p d_time %ld "
+		 "jiffies %ld", full_path, inode, inode->i_count.counter,
+		 dentry, dentry->d_time, jiffies));
 
-	if (timespec_equal(&local_mtime, &direntry->d_inode->i_mtime) &&
-	    (local_size == direntry->d_inode->i_size)) {
-		cFYI(1, ("cifs_revalidate - inode unchanged"));
-	} else {
-		/* file may have changed on server */
-		if (cifsInode->clientCanCacheRead) {
-			/* no need to invalidate inode pages since we were the
-			   only ones who could have modified the file and the
-			   server copy is staler than ours */
-		} else {
-			invalidate_inode = true;
-		}
-	}
+	if (CIFS_SB(sb)->tcon->unix_ext)
+		rc = cifs_get_inode_info_unix(&inode, full_path, sb, xid);
+	else
+		rc = cifs_get_inode_info(&inode, full_path, NULL, sb,
+					 xid, NULL);
 
-	/* can not grab this sem since kernel filesys locking documentation
-	   indicates i_mutex may be taken by the kernel on lookup and rename
-	   which could deadlock if we grab the i_mutex here as well */
-/*	mutex_lock(&direntry->d_inode->i_mutex);*/
-	/* need to write out dirty pages here  */
-	if (direntry->d_inode->i_mapping) {
-		/* do we need to lock inode until after invalidate completes
-		   below? */
-		wbrc = filemap_fdatawrite(direntry->d_inode->i_mapping);
-		if (wbrc)
-			CIFS_I(direntry->d_inode)->write_behind_rc = wbrc;
-	}
-	if (invalidate_inode) {
-	/* shrink_dcache not necessary now that cifs dentry ops
-	are exported for negative dentries */
-/*		if (S_ISDIR(direntry->d_inode->i_mode))
-			shrink_dcache_parent(direntry); */
-		if (S_ISREG(direntry->d_inode->i_mode)) {
-			if (direntry->d_inode->i_mapping) {
-				wbrc = filemap_fdatawait(direntry->d_inode->i_mapping);
-				if (wbrc)
-					CIFS_I(direntry->d_inode)->write_behind_rc = wbrc;
-			}
-			/* may eventually have to do this for open files too */
-			if (list_empty(&(cifsInode->openFileList))) {
-				/* changed on server - flush read ahead pages */
-				cFYI(1, ("Invalidating read ahead data on "
-					 "closed file"));
-				invalidate_remote_inode(direntry->d_inode);
-			}
-		}
-	}
-/*	mutex_unlock(&direntry->d_inode->i_mutex); */
+check_inval:
+	if (CIFS_I(inode)->invalid_mapping)
+		cifs_invalidate_mapping(inode);
 
 	kfree(full_path);
 	FreeXid(xid);
@@ -1527,7 +1598,7 @@ int cifs_revalidate(struct dentry *direntry)
 int cifs_getattr(struct vfsmount *mnt, struct dentry *dentry,
 	struct kstat *stat)
 {
-	int err = cifs_revalidate(dentry);
+	int err = cifs_revalidate_dentry(dentry);
 	if (!err) {
 		generic_fillattr(dentry->d_inode, stat);
 		stat->blksize = CIFS_MAX_MSGSIZE;
diff --git a/fs/compat.c b/fs/compat.c
index 00d90c2e66f0..030602d453b7 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -1795,6 +1795,24 @@ asmlinkage long compat_sys_select(int n, compat_ulong_t __user *inp,
 	return ret;
 }
 
+struct compat_sel_arg_struct {
+	compat_ulong_t n;
+	compat_uptr_t inp;
+	compat_uptr_t outp;
+	compat_uptr_t exp;
+	compat_uptr_t tvp;
+};
+
+asmlinkage long compat_sys_old_select(struct compat_sel_arg_struct __user *arg)
+{
+	struct compat_sel_arg_struct a;
+
+	if (copy_from_user(&a, arg, sizeof(a)))
+		return -EFAULT;
+	return compat_sys_select(a.n, compat_ptr(a.inp), compat_ptr(a.outp),
+				 compat_ptr(a.exp), compat_ptr(a.tvp));
+}
+
 #ifdef HAVE_SET_RESTORE_SIGMASK
 static long do_compat_pselect(int n, compat_ulong_t __user *inp,
 	compat_ulong_t __user *outp, compat_ulong_t __user *exp,
diff --git a/fs/dlm/lockspace.c b/fs/dlm/lockspace.c
index 26a8bd40400a..f994a7dfda85 100644
--- a/fs/dlm/lockspace.c
+++ b/fs/dlm/lockspace.c
@@ -148,7 +148,7 @@ static void lockspace_kobj_release(struct kobject *k)
 	kfree(ls);
 }
 
-static struct sysfs_ops dlm_attr_ops = {
+static const struct sysfs_ops dlm_attr_ops = {
 	.show  = dlm_attr_show,
 	.store = dlm_attr_store,
 };
diff --git a/fs/dlm/member.c b/fs/dlm/member.c
index 84f70bfb0baf..b12532e553f8 100644
--- a/fs/dlm/member.c
+++ b/fs/dlm/member.c
@@ -312,7 +312,7 @@ int dlm_ls_stop(struct dlm_ls *ls)
 	/*
 	 * This in_recovery lock does two things:
 	 * 1) Keeps this function from returning until all threads are out
-	 *    of locking routines and locking is truely stopped.
+	 *    of locking routines and locking is truly stopped.
 	 * 2) Keeps any new requests from being processed until it's unlocked
 	 *    when recovery is complete.
 	 */
diff --git a/fs/ext3/super.c b/fs/ext3/super.c
index e844accbf55d..1bee604cc6cd 100644
--- a/fs/ext3/super.c
+++ b/fs/ext3/super.c
@@ -164,7 +164,7 @@ void ext3_msg(struct super_block *sb, const char *prefix,
  * write out the superblock safely.
  *
  * We'll just use the journal_abort() error code to record an error in
- * the journal instead.  On recovery, the journal will compain about
+ * the journal instead.  On recovery, the journal will complain about
  * that error until we've noted it down and cleared it.
  */
 
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index 506713a2ebd8..54df209d2eed 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -69,7 +69,7 @@
  *
  * pa_lstart -> the logical start block for this prealloc space
  * pa_pstart -> the physical start block for this prealloc space
- * pa_len    -> lenght for this prealloc space
+ * pa_len    -> length for this prealloc space
  * pa_free   ->  free space available in this prealloc space
  *
  * The inode preallocation space is used looking at the _logical_ start
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 2b83b96cb2eb..ba191dae8730 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -302,7 +302,7 @@ void ext4_journal_abort_handle(const char *caller, const char *err_fn,
  * write out the superblock safely.
  *
  * We'll just use the jbd2_journal_abort() error code to record an error in
- * the journal instead.  On recovery, the journal will compain about
+ * the journal instead.  On recovery, the journal will complain about
  * that error until we've noted it down and cleared it.
  */
 
@@ -2358,7 +2358,7 @@ static void ext4_sb_release(struct kobject *kobj)
 }
 
 
-static struct sysfs_ops ext4_attr_ops = {
+static const struct sysfs_ops ext4_attr_ops = {
 	.show	= ext4_attr_show,
 	.store	= ext4_attr_store,
 };
diff --git a/fs/fat/inode.c b/fs/fat/inode.c
index fbeecdc194dc..0ce143bd7d56 100644
--- a/fs/fat/inode.c
+++ b/fs/fat/inode.c
@@ -558,7 +558,7 @@ static int fat_statfs(struct dentry *dentry, struct kstatfs *buf)
 	buf->f_bavail = sbi->free_clusters;
 	buf->f_fsid.val[0] = (u32)id;
 	buf->f_fsid.val[1] = (u32)(id >> 32);
-	buf->f_namelen = sbi->options.isvfat ? 260 : 12;
+	buf->f_namelen = sbi->options.isvfat ? FAT_LFN_LEN : 12;
 
 	return 0;
 }
diff --git a/fs/fat/namei_vfat.c b/fs/fat/namei_vfat.c
index f565f24019b5..c1ef50154868 100644
--- a/fs/fat/namei_vfat.c
+++ b/fs/fat/namei_vfat.c
@@ -502,14 +502,14 @@ xlate_to_uni(const unsigned char *name, int len, unsigned char *outname,
 		*outlen = utf8s_to_utf16s(name, len, (wchar_t *)outname);
 		if (*outlen < 0)
 			return *outlen;
-		else if (*outlen > 255)
+		else if (*outlen > FAT_LFN_LEN)
 			return -ENAMETOOLONG;
 
 		op = &outname[*outlen * sizeof(wchar_t)];
 	} else {
 		if (nls) {
 			for (i = 0, ip = name, op = outname, *outlen = 0;
-			     i < len && *outlen <= 255;
+			     i < len && *outlen <= FAT_LFN_LEN;
 			     *outlen += 1)
 			{
 				if (escape && (*ip == ':')) {
@@ -549,7 +549,7 @@ xlate_to_uni(const unsigned char *name, int len, unsigned char *outname,
 				return -ENAMETOOLONG;
 		} else {
 			for (i = 0, ip = name, op = outname, *outlen = 0;
-			     i < len && *outlen <= 255;
+			     i < len && *outlen <= FAT_LFN_LEN;
 			     i++, *outlen += 1)
 			{
 				*op++ = *ip++;
@@ -701,6 +701,15 @@ static int vfat_find(struct inode *dir, struct qstr *qname,
 	return fat_search_long(dir, qname->name, len, sinfo);
 }
 
+/*
+ * (nfsd's) anonymous disconnected dentry?
+ * NOTE: !IS_ROOT() is not anonymous (I.e. d_splice_alias() did the job).
+ */
+static int vfat_d_anon_disconn(struct dentry *dentry)
+{
+	return IS_ROOT(dentry) && (dentry->d_flags & DCACHE_DISCONNECTED);
+}
+
 static struct dentry *vfat_lookup(struct inode *dir, struct dentry *dentry,
 				  struct nameidata *nd)
 {
@@ -729,11 +738,11 @@ static struct dentry *vfat_lookup(struct inode *dir, struct dentry *dentry,
 	}
 
 	alias = d_find_alias(inode);
-	if (alias && !(alias->d_flags & DCACHE_DISCONNECTED)) {
+	if (alias && !vfat_d_anon_disconn(alias)) {
 		/*
-		 * This inode has non DCACHE_DISCONNECTED dentry. This
-		 * means, the user did ->lookup() by an another name
-		 * (longname vs 8.3 alias of it) in past.
+		 * This inode has non anonymous-DCACHE_DISCONNECTED
+		 * dentry. This means, the user did ->lookup() by an
+		 * another name (longname vs 8.3 alias of it) in past.
 		 *
 		 * Switch to new one for reason of locality if possible.
 		 */
@@ -743,7 +752,9 @@ static struct dentry *vfat_lookup(struct inode *dir, struct dentry *dentry,
 		iput(inode);
 		unlock_super(sb);
 		return alias;
-	}
+	} else
+		dput(alias);
+
 out:
 	unlock_super(sb);
 	dentry->d_op = sb->s_root->d_op;
diff --git a/fs/fscache/Kconfig b/fs/fscache/Kconfig
index 864dac20a242..cc94bb9563f2 100644
--- a/fs/fscache/Kconfig
+++ b/fs/fscache/Kconfig
@@ -1,7 +1,6 @@
 
 config FSCACHE
 	tristate "General filesystem local caching manager"
-	depends on EXPERIMENTAL
 	select SLOW_WORK
 	help
 	  This option enables a generic filesystem caching manager that can be
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index 1a822ce2b24b..ec14d19ce501 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -850,7 +850,7 @@ static void fuse_send_init(struct fuse_conn *fc, struct fuse_req *req)
 	req->in.args[0].size = sizeof(*arg);
 	req->in.args[0].value = arg;
 	req->out.numargs = 1;
-	/* Variable length arguement used for backward compatibility
+	/* Variable length argument used for backward compatibility
 	   with interface version < 7.5.  Rest of init_out is zeroed
 	   by do_get_request(), so a short reply is not a problem */
 	req->out.argvar = 1;
diff --git a/fs/gfs2/Kconfig b/fs/gfs2/Kconfig
index 4dcddf83326f..a47b43107112 100644
--- a/fs/gfs2/Kconfig
+++ b/fs/gfs2/Kconfig
@@ -8,7 +8,6 @@ config GFS2_FS
 	select FS_POSIX_ACL
 	select CRC32
 	select SLOW_WORK
-	select QUOTA
 	select QUOTACTL
 	help
 	  A cluster filesystem.
diff --git a/fs/gfs2/file.c b/fs/gfs2/file.c
index a6abbae8a278..e6dd2aec6f82 100644
--- a/fs/gfs2/file.c
+++ b/fs/gfs2/file.c
@@ -640,7 +640,7 @@ static int gfs2_lock(struct file *file, int cmd, struct file_lock *fl)
 
 	if (!(fl->fl_flags & FL_POSIX))
 		return -ENOLCK;
-	if (__mandatory_lock(&ip->i_inode))
+	if (__mandatory_lock(&ip->i_inode) && fl->fl_type != F_UNLCK)
 		return -ENOLCK;
 
 	if (cmd == F_CANCELLK) {
diff --git a/fs/gfs2/incore.h b/fs/gfs2/incore.h
index b8025e51cabf..3aac46f6853e 100644
--- a/fs/gfs2/incore.h
+++ b/fs/gfs2/incore.h
@@ -616,7 +616,7 @@ struct gfs2_sbd {
 	unsigned int sd_log_blks_reserved;
 	unsigned int sd_log_commited_buf;
 	unsigned int sd_log_commited_databuf;
-	unsigned int sd_log_commited_revoke;
+	int sd_log_commited_revoke;
 
 	unsigned int sd_log_num_buf;
 	unsigned int sd_log_num_revoke;
diff --git a/fs/gfs2/log.c b/fs/gfs2/log.c
index 4511b08fc451..e5bf4b59d46e 100644
--- a/fs/gfs2/log.c
+++ b/fs/gfs2/log.c
@@ -417,7 +417,7 @@ static unsigned int calc_reserved(struct gfs2_sbd *sdp)
 	databufhdrs_needed = (sdp->sd_log_commited_databuf +
 			      (dbuf_limit - 1)) / dbuf_limit;
 
-	if (sdp->sd_log_commited_revoke)
+	if (sdp->sd_log_commited_revoke > 0)
 		revokes = gfs2_struct2blk(sdp, sdp->sd_log_commited_revoke,
 					  sizeof(u64));
 
@@ -790,7 +790,6 @@ static void log_refund(struct gfs2_sbd *sdp, struct gfs2_trans *tr)
 	gfs2_assert_withdraw(sdp, (((int)sdp->sd_log_commited_buf) >= 0) ||
 			     (((int)sdp->sd_log_commited_databuf) >= 0));
 	sdp->sd_log_commited_revoke += tr->tr_num_revoke - tr->tr_num_revoke_rm;
-	gfs2_assert_withdraw(sdp, ((int)sdp->sd_log_commited_revoke) >= 0);
 	reserved = calc_reserved(sdp);
 	gfs2_assert_withdraw(sdp, sdp->sd_log_blks_reserved + tr->tr_reserved >= reserved);
 	unused = sdp->sd_log_blks_reserved - reserved + tr->tr_reserved;
diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c
index a054b526dc08..c1309ed1c496 100644
--- a/fs/gfs2/ops_fstype.c
+++ b/fs/gfs2/ops_fstype.c
@@ -1001,7 +1001,7 @@ static const struct lm_lockops nolock_ops = {
 /**
  * gfs2_lm_mount - mount a locking protocol
  * @sdp: the filesystem
- * @args: mount arguements
+ * @args: mount arguments
  * @silent: if 1, don't complain if the FS isn't a GFS2 fs
  *
  * Returns: errno
diff --git a/fs/gfs2/sys.c b/fs/gfs2/sys.c
index b5f1a46133c8..419042f7f0b6 100644
--- a/fs/gfs2/sys.c
+++ b/fs/gfs2/sys.c
@@ -49,7 +49,7 @@ static ssize_t gfs2_attr_store(struct kobject *kobj, struct attribute *attr,
 	return a->store ? a->store(sdp, buf, len) : len;
 }
 
-static struct sysfs_ops gfs2_attr_ops = {
+static const struct sysfs_ops gfs2_attr_ops = {
 	.show  = gfs2_attr_show,
 	.store = gfs2_attr_store,
 };
@@ -574,7 +574,7 @@ static int gfs2_uevent(struct kset *kset, struct kobject *kobj,
 	return 0;
 }
 
-static struct kset_uevent_ops gfs2_uevent_ops = {
+static const struct kset_uevent_ops gfs2_uevent_ops = {
 	.uevent = gfs2_uevent,
 };
 
diff --git a/fs/jbd/transaction.c b/fs/jbd/transaction.c
index 99e9fea11077..5ae71e75a491 100644
--- a/fs/jbd/transaction.c
+++ b/fs/jbd/transaction.c
@@ -1398,7 +1398,7 @@ int journal_stop(handle_t *handle)
 	 * the case where our storage is so fast that it is more optimal to go
 	 * ahead and force a flush and wait for the transaction to be committed
 	 * than it is to wait for an arbitrary amount of time for new writers to
-	 * join the transaction.  We acheive this by measuring how long it takes
+	 * join the transaction.  We achieve this by measuring how long it takes
 	 * to commit a transaction, and compare it with how long this
 	 * transaction has been running, and if run time < commit time then we
 	 * sleep for the delta and commit.  This greatly helps super fast disks
diff --git a/fs/jffs2/readinode.c b/fs/jffs2/readinode.c
index e22de8397b74..d32ee9412cb9 100644
--- a/fs/jffs2/readinode.c
+++ b/fs/jffs2/readinode.c
@@ -567,7 +567,7 @@ static void jffs2_free_tmp_dnode_info_list(struct rb_root *list)
 			else BUG();
 		}
 	}
-	list->rb_node = NULL;
+	*list = RB_ROOT;
 }
 
 static void jffs2_free_full_dirent_list(struct jffs2_full_dirent *fd)
diff --git a/fs/locks.c b/fs/locks.c
index ae9ded026b7c..ab24d49fc048 100644
--- a/fs/locks.c
+++ b/fs/locks.c
@@ -1455,7 +1455,7 @@ EXPORT_SYMBOL(generic_setlease);
  *	leases held by processes on this node.
  *
  *	There is also no break_lease method; filesystems that
- *	handle their own leases shoud break leases themselves from the
+ *	handle their own leases should break leases themselves from the
  *	filesystem's open, create, and (on truncate) setattr methods.
  *
  *	Warning: the only current setlease methods exist only to disable
diff --git a/fs/mpage.c b/fs/mpage.c
index 42381bd6543b..598d54e200eb 100644
--- a/fs/mpage.c
+++ b/fs/mpage.c
@@ -561,7 +561,7 @@ page_is_mapped:
 	if (page->index >= end_index) {
 		/*
 		 * The page straddles i_size.  It must be zeroed out on each
-		 * and every writepage invokation because it may be mmapped.
+		 * and every writepage invocation because it may be mmapped.
 		 * "A file is mapped in multiples of the page size.  For a file
 		 * that is not a multiple of the page size, the remaining memory
 		 * is zeroed when mapped, and writes to that region are not
diff --git a/fs/namei.c b/fs/namei.c
index 48e60a187325..1c0fca6e899e 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -2544,7 +2544,7 @@ SYSCALL_DEFINE2(link, const char __user *, oldname, const char __user *, newname
  *	e) conversion from fhandle to dentry may come in the wrong moment - when
  *	   we are removing the target. Solution: we will have to grab ->i_mutex
  *	   in the fhandle_to_dentry code. [FIXME - current nfsfh.c relies on
- *	   ->i_mutex on parents, which works but leads to some truely excessive
+ *	   ->i_mutex on parents, which works but leads to some truly excessive
  *	   locking].
  */
 static int vfs_rename_dir(struct inode *old_dir, struct dentry *old_dentry,
diff --git a/fs/nfs/callback_xdr.c b/fs/nfs/callback_xdr.c
index db30c0b398b5..a2b8b4df125d 100644
--- a/fs/nfs/callback_xdr.c
+++ b/fs/nfs/callback_xdr.c
@@ -782,6 +782,7 @@ struct svc_version nfs4_callback_version1 = {
 	.vs_proc = nfs4_callback_procedures1,
 	.vs_xdrsize = NFS4_CALLBACK_XDRSIZE,
 	.vs_dispatch = NULL,
+	.vs_hidden = 1,
 };
 
 struct svc_version nfs4_callback_version4 = {
diff --git a/fs/nfs/delegation.h b/fs/nfs/delegation.h
index 944b627ec6e1..69e7b8140122 100644
--- a/fs/nfs/delegation.h
+++ b/fs/nfs/delegation.h
@@ -71,4 +71,10 @@ static inline int nfs_inode_return_delegation(struct inode *inode)
 }
 #endif
 
+static inline int nfs_have_delegated_attributes(struct inode *inode)
+{
+	return nfs_have_delegation(inode, FMODE_READ) &&
+		!(NFS_I(inode)->cache_validity & NFS_INO_REVAL_FORCED);
+}
+
 #endif
diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index a1f6b4438fb1..c6f2750648f4 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -1789,7 +1789,7 @@ static int nfs_access_get_cached(struct inode *inode, struct rpc_cred *cred, str
 	cache = nfs_access_search_rbtree(inode, cred);
 	if (cache == NULL)
 		goto out;
-	if (!nfs_have_delegation(inode, FMODE_READ) &&
+	if (!nfs_have_delegated_attributes(inode) &&
 	    !time_in_range_open(jiffies, cache->jiffies, cache->jiffies + nfsi->attrtimeo))
 		goto out_stale;
 	res->jiffies = cache->jiffies;
diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index 657201acda84..e358df75a6ad 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -729,7 +729,7 @@ int nfs_attribute_timeout(struct inode *inode)
 {
 	struct nfs_inode *nfsi = NFS_I(inode);
 
-	if (nfs_have_delegation(inode, FMODE_READ))
+	if (nfs_have_delegated_attributes(inode))
 		return 0;
 	return !time_in_range_open(jiffies, nfsi->read_cache_jiffies, nfsi->read_cache_jiffies + nfsi->attrtimeo);
 }
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index eda74c42d552..f9254fb0c9d0 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -5107,6 +5107,7 @@ static int nfs41_proc_async_sequence(struct nfs_client *clp,
 	res = kzalloc(sizeof(*res), GFP_KERNEL);
 	if (!args || !res) {
 		kfree(args);
+		kfree(res);
 		nfs_put_client(clp);
 		return -ENOMEM;
 	}
diff --git a/fs/nfs/pagelist.c b/fs/nfs/pagelist.c
index a12c45b65dd4..29d9d36cd5f4 100644
--- a/fs/nfs/pagelist.c
+++ b/fs/nfs/pagelist.c
@@ -112,12 +112,10 @@ void nfs_unlock_request(struct nfs_page *req)
  */
 int nfs_set_page_tag_locked(struct nfs_page *req)
 {
-	struct nfs_inode *nfsi = NFS_I(req->wb_context->path.dentry->d_inode);
-
 	if (!nfs_lock_request_dontget(req))
 		return 0;
 	if (req->wb_page != NULL)
-		radix_tree_tag_set(&nfsi->nfs_page_tree, req->wb_index, NFS_PAGE_TAG_LOCKED);
+		radix_tree_tag_set(&NFS_I(req->wb_context->path.dentry->d_inode)->nfs_page_tree, req->wb_index, NFS_PAGE_TAG_LOCKED);
 	return 1;
 }
 
@@ -126,10 +124,10 @@ int nfs_set_page_tag_locked(struct nfs_page *req)
  */
 void nfs_clear_page_tag_locked(struct nfs_page *req)
 {
-	struct inode *inode = req->wb_context->path.dentry->d_inode;
-	struct nfs_inode *nfsi = NFS_I(inode);
-
 	if (req->wb_page != NULL) {
+		struct inode *inode = req->wb_context->path.dentry->d_inode;
+		struct nfs_inode *nfsi = NFS_I(inode);
+
 		spin_lock(&inode->i_lock);
 		radix_tree_tag_clear(&nfsi->nfs_page_tree, req->wb_index, NFS_PAGE_TAG_LOCKED);
 		nfs_unlock_request(req);
@@ -142,16 +140,22 @@ void nfs_clear_page_tag_locked(struct nfs_page *req)
  * nfs_clear_request - Free up all resources allocated to the request
  * @req:
  *
- * Release page resources associated with a write request after it
- * has completed.
+ * Release page and open context resources associated with a read/write
+ * request after it has completed.
  */
 void nfs_clear_request(struct nfs_page *req)
 {
 	struct page *page = req->wb_page;
+	struct nfs_open_context *ctx = req->wb_context;
+
 	if (page != NULL) {
 		page_cache_release(page);
 		req->wb_page = NULL;
 	}
+	if (ctx != NULL) {
+		put_nfs_open_context(ctx);
+		req->wb_context = NULL;
+	}
 }
 
 
@@ -165,9 +169,8 @@ static void nfs_free_request(struct kref *kref)
 {
 	struct nfs_page *req = container_of(kref, struct nfs_page, wb_kref);
 
-	/* Release struct file or cached credential */
+	/* Release struct file and open context */
 	nfs_clear_request(req);
-	put_nfs_open_context(req->wb_context);
 	nfs_page_free(req);
 }
 
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index f1afee4eea77..6baf9a393466 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -2214,7 +2214,7 @@ static int nfs_get_sb(struct file_system_type *fs_type,
 	} else {
 		error = nfs_bdi_register(server);
 		if (error)
-			goto error_splat_super;
+			goto error_splat_bdi;
 	}
 
 	if (!s->s_root) {
@@ -2256,6 +2256,9 @@ out_err_nosb:
 error_splat_root:
 	dput(mntroot);
 error_splat_super:
+	if (server && !s->s_root)
+		bdi_unregister(&server->backing_dev_info);
+error_splat_bdi:
 	deactivate_locked_super(s);
 	goto out;
 }
@@ -2326,7 +2329,7 @@ static int nfs_xdev_get_sb(struct file_system_type *fs_type, int flags,
 	} else {
 		error = nfs_bdi_register(server);
 		if (error)
-			goto error_splat_super;
+			goto error_splat_bdi;
 	}
 
 	if (!s->s_root) {
@@ -2363,6 +2366,9 @@ out_err_noserver:
 	return error;
 
 error_splat_super:
+	if (server && !s->s_root)
+		bdi_unregister(&server->backing_dev_info);
+error_splat_bdi:
 	deactivate_locked_super(s);
 	dprintk("<-- nfs_xdev_get_sb() = %d [splat]\n", error);
 	return error;
@@ -2578,7 +2584,7 @@ static int nfs4_remote_get_sb(struct file_system_type *fs_type,
 	} else {
 		error = nfs_bdi_register(server);
 		if (error)
-			goto error_splat_super;
+			goto error_splat_bdi;
 	}
 
 	if (!s->s_root) {
@@ -2616,6 +2622,9 @@ out_free:
 error_splat_root:
 	dput(mntroot);
 error_splat_super:
+	if (server && !s->s_root)
+		bdi_unregister(&server->backing_dev_info);
+error_splat_bdi:
 	deactivate_locked_super(s);
 	goto out;
 }
@@ -2811,7 +2820,7 @@ static int nfs4_xdev_get_sb(struct file_system_type *fs_type, int flags,
 	} else {
 		error = nfs_bdi_register(server);
 		if (error)
-			goto error_splat_super;
+			goto error_splat_bdi;
 	}
 
 	if (!s->s_root) {
@@ -2847,6 +2856,9 @@ out_err_noserver:
 	return error;
 
 error_splat_super:
+	if (server && !s->s_root)
+		bdi_unregister(&server->backing_dev_info);
+error_splat_bdi:
 	deactivate_locked_super(s);
 	dprintk("<-- nfs4_xdev_get_sb() = %d [splat]\n", error);
 	return error;
@@ -2893,7 +2905,7 @@ static int nfs4_remote_referral_get_sb(struct file_system_type *fs_type,
 	} else {
 		error = nfs_bdi_register(server);
 		if (error)
-			goto error_splat_super;
+			goto error_splat_bdi;
 	}
 
 	if (!s->s_root) {
@@ -2929,6 +2941,9 @@ out_err_noserver:
 	return error;
 
 error_splat_super:
+	if (server && !s->s_root)
+		bdi_unregister(&server->backing_dev_info);
+error_splat_bdi:
 	deactivate_locked_super(s);
 	dprintk("<-- nfs4_referral_get_sb() = %d [splat]\n", error);
 	return error;
diff --git a/fs/nfsd/nfs4xdr.c b/fs/nfsd/nfs4xdr.c
index 78c7e24e5129..c47b4d7bafa7 100644
--- a/fs/nfsd/nfs4xdr.c
+++ b/fs/nfsd/nfs4xdr.c
@@ -1528,7 +1528,7 @@ static void write_cinfo(__be32 **p, struct nfsd4_change_info *c)
 	} } while (0);
 
 /* Encode as an array of strings the string given with components
- * seperated @sep.
+ * separated @sep.
  */
 static __be32 nfsd4_encode_components(char sep, char *components,
 				   __be32 **pp, int *buflen)
diff --git a/fs/nilfs2/alloc.h b/fs/nilfs2/alloc.h
index f4543ac4f560..5cccf874d692 100644
--- a/fs/nilfs2/alloc.h
+++ b/fs/nilfs2/alloc.h
@@ -42,7 +42,7 @@ void *nilfs_palloc_block_get_entry(const struct inode *, __u64,
 				   const struct buffer_head *, void *);
 
 /**
- * nilfs_palloc_req - persistent alloctor request and reply
+ * nilfs_palloc_req - persistent allocator request and reply
  * @pr_entry_nr: entry number (vblocknr or inode number)
  * @pr_desc_bh: buffer head of the buffer containing block group descriptors
  * @pr_bitmap_bh: buffer head of the buffer containing a block group bitmap
diff --git a/fs/nilfs2/dat.c b/fs/nilfs2/dat.c
index 9d1e5de91afb..013146755683 100644
--- a/fs/nilfs2/dat.c
+++ b/fs/nilfs2/dat.c
@@ -288,7 +288,7 @@ int nilfs_dat_mark_dirty(struct inode *dat, __u64 vblocknr)
  * @vblocknrs and @nitems.
  *
  * Return Value: On success, 0 is returned. On error, one of the following
- * nagative error codes is returned.
+ * negative error codes is returned.
  *
  * %-EIO - I/O error.
  *
diff --git a/fs/nilfs2/dir.c b/fs/nilfs2/dir.c
index 0092840492ee..85c89dfc71f0 100644
--- a/fs/nilfs2/dir.c
+++ b/fs/nilfs2/dir.c
@@ -396,7 +396,7 @@ nilfs_find_entry(struct inode *dir, const struct qstr *qstr,
 		/* next page is past the blocks we've got */
 		if (unlikely(n > (dir->i_blocks >> (PAGE_CACHE_SHIFT - 9)))) {
 			nilfs_error(dir->i_sb, __func__,
-			       "dir %lu size %lld exceeds block cout %llu",
+			       "dir %lu size %lld exceeds block count %llu",
 			       dir->i_ino, dir->i_size,
 			       (unsigned long long)dir->i_blocks);
 			goto out;
diff --git a/fs/nilfs2/gcinode.c b/fs/nilfs2/gcinode.c
index e16a6664dfa2..8880a9e281e7 100644
--- a/fs/nilfs2/gcinode.c
+++ b/fs/nilfs2/gcinode.c
@@ -28,10 +28,10 @@
  * gcinodes), and this file provides lookup function of the dummy
  * inodes and their buffer read function.
  *
- * Since NILFS2 keeps up multiple checkpoints/snapshots accross GC, it
+ * Since NILFS2 keeps up multiple checkpoints/snapshots across GC, it
  * has to treat blocks that belong to a same file but have different
  * checkpoint numbers.  To avoid interference among generations, dummy
- * inodes are managed separatly from actual inodes, and their lookup
+ * inodes are managed separately from actual inodes, and their lookup
  * function (nilfs_gc_iget) is designed to be specified with a
  * checkpoint number argument as well as an inode number.
  *
diff --git a/fs/nilfs2/page.c b/fs/nilfs2/page.c
index a2692bbc7b50..fc246dba112a 100644
--- a/fs/nilfs2/page.c
+++ b/fs/nilfs2/page.c
@@ -292,7 +292,7 @@ void nilfs_free_private_page(struct page *page)
  * @src: source page
  * @copy_dirty: flag whether to copy dirty states on the page's buffer heads.
  *
- * This fuction is for both data pages and btnode pages.  The dirty flag
+ * This function is for both data pages and btnode pages.  The dirty flag
  * should be treated by caller.  The page must not be under i/o.
  * Both src and dst page must be locked
  */
@@ -388,7 +388,7 @@ repeat:
 }
 
 /**
- * nilfs_copy_back_pages -- copy back pages to orignal cache from shadow cache
+ * nilfs_copy_back_pages -- copy back pages to original cache from shadow cache
  * @dmap: destination page cache
  * @smap: source page cache
  *
diff --git a/fs/nilfs2/segbuf.c b/fs/nilfs2/segbuf.c
index ab56fe44e377..636eaafd6ea2 100644
--- a/fs/nilfs2/segbuf.c
+++ b/fs/nilfs2/segbuf.c
@@ -32,7 +32,7 @@
 struct nilfs_write_info {
 	struct the_nilfs       *nilfs;
 	struct bio	       *bio;
-	int 			start, end; /* The region to be submitted */
+	int			start, end; /* The region to be submitted */
 	int			rest_blocks;
 	int			max_pages;
 	int			nr_vecs;
@@ -174,7 +174,7 @@ int nilfs_segbuf_reset(struct nilfs_segment_buffer *segbuf, unsigned flags,
 }
 
 /*
- * Setup segument summary
+ * Setup segment summary
  */
 void nilfs_segbuf_fill_in_segsum(struct nilfs_segment_buffer *segbuf)
 {
@@ -470,8 +470,8 @@ static int nilfs_segbuf_submit_bh(struct nilfs_segment_buffer *segbuf,
  *
  * %-ENOMEM - Insufficient memory available.
  */
-int nilfs_segbuf_write(struct nilfs_segment_buffer *segbuf,
-		       struct the_nilfs *nilfs)
+static int nilfs_segbuf_write(struct nilfs_segment_buffer *segbuf,
+			      struct the_nilfs *nilfs)
 {
 	struct nilfs_write_info wi;
 	struct buffer_head *bh;
@@ -514,7 +514,7 @@ int nilfs_segbuf_write(struct nilfs_segment_buffer *segbuf,
  *
  * %-EIO - I/O error
  */
-int nilfs_segbuf_wait(struct nilfs_segment_buffer *segbuf)
+static int nilfs_segbuf_wait(struct nilfs_segment_buffer *segbuf)
 {
 	int err = 0;
 
diff --git a/fs/nilfs2/segment.c b/fs/nilfs2/segment.c
index ada2f1b947a3..69576a95e13f 100644
--- a/fs/nilfs2/segment.c
+++ b/fs/nilfs2/segment.c
@@ -141,7 +141,7 @@ int nilfs_init_transaction_cache(void)
 }
 
 /**
- * nilfs_detroy_transaction_cache - destroy the cache for transaction info
+ * nilfs_destroy_transaction_cache - destroy the cache for transaction info
  *
  * nilfs_destroy_transaction_cache() frees the slab cache for the struct
  * nilfs_transaction_info.
@@ -201,7 +201,7 @@ static int nilfs_prepare_segment_lock(struct nilfs_transaction_info *ti)
  * This function allocates a nilfs_transaction_info struct to keep context
  * information on it.  It is initialized and hooked onto the current task in
  * the outermost call.  If a pre-allocated struct is given to @ti, it is used
- * instead; othewise a new struct is assigned from a slab.
+ * instead; otherwise a new struct is assigned from a slab.
  *
  * When @vacancy_check flag is set, this function will check the amount of
  * free space, and will wait for the GC to reclaim disk space if low capacity.
@@ -2214,7 +2214,7 @@ static int nilfs_segctor_do_construct(struct nilfs_sc_info *sci, int mode)
 }
 
 /**
- * nilfs_secgtor_start_timer - set timer of background write
+ * nilfs_segctor_start_timer - set timer of background write
  * @sci: nilfs_sc_info
  *
  * If the timer has already been set, it ignores the new request.
@@ -2854,7 +2854,7 @@ static void nilfs_segctor_destroy(struct nilfs_sc_info *sci)
  * @sbi: nilfs_sb_info
  *
  * nilfs_attach_segment_constructor() allocates a struct nilfs_sc_info,
- * initilizes it, and starts the segment constructor.
+ * initializes it, and starts the segment constructor.
  *
  * Return Value: On success, 0 is returned. On error, one of the following
  * negative error code is returned.
diff --git a/fs/nilfs2/segment.h b/fs/nilfs2/segment.h
index 3155e0c7f415..82dfd6a686b9 100644
--- a/fs/nilfs2/segment.h
+++ b/fs/nilfs2/segment.h
@@ -30,7 +30,7 @@
 #include "sb.h"
 
 /**
- * struct nilfs_recovery_info - Recovery infomation
+ * struct nilfs_recovery_info - Recovery information
  * @ri_need_recovery: Recovery status
  * @ri_super_root: Block number of the last super root
  * @ri_ri_cno: Number of the last checkpoint
@@ -71,7 +71,7 @@ struct nilfs_recovery_info {
  */
 struct nilfs_cstage {
 	int			scnt;
-	unsigned 		flags;
+	unsigned		flags;
 	struct nilfs_inode_info *dirty_file_ptr;
 	struct nilfs_inode_info *gc_inode_ptr;
 };
diff --git a/fs/nilfs2/sufile.c b/fs/nilfs2/sufile.c
index b6c36d0cc331..3c6cc6005c2e 100644
--- a/fs/nilfs2/sufile.c
+++ b/fs/nilfs2/sufile.c
@@ -18,7 +18,7 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  *
  * Written by Koji Sato <koji@osrg.net>.
- * Rivised by Ryusuke Konishi <ryusuke@osrg.net>.
+ * Revised by Ryusuke Konishi <ryusuke@osrg.net>.
  */
 
 #include <linux/kernel.h>
diff --git a/fs/nilfs2/super.c b/fs/nilfs2/super.c
index 92579cc4c935..0cdbc5e7655a 100644
--- a/fs/nilfs2/super.c
+++ b/fs/nilfs2/super.c
@@ -436,7 +436,7 @@ static int nilfs_statfs(struct dentry *dentry, struct kstatfs *buf)
 	/*
 	 * Compute the overhead
 	 *
-	 * When distributing meta data blocks outside semgent structure,
+	 * When distributing meta data blocks outside segment structure,
 	 * We must count them as the overhead.
 	 */
 	overhead = 0;
@@ -866,7 +866,7 @@ static int nilfs_remount(struct super_block *sb, int *flags, char *data)
 	if ((*flags & MS_RDONLY) &&
 	    sbi->s_snapshot_cno != old_opts.snapshot_cno) {
 		printk(KERN_WARNING "NILFS (device %s): couldn't "
-		       "remount to a different snapshot. \n",
+		       "remount to a different snapshot.\n",
 		       sb->s_id);
 		err = -EINVAL;
 		goto restore_opts;
diff --git a/fs/nilfs2/the_nilfs.c b/fs/nilfs2/the_nilfs.c
index 92733d5651d2..33871f7e4f01 100644
--- a/fs/nilfs2/the_nilfs.c
+++ b/fs/nilfs2/the_nilfs.c
@@ -386,7 +386,7 @@ static int nilfs_store_disk_layout(struct the_nilfs *nilfs,
 
 	nilfs->ns_blocks_per_segment = le32_to_cpu(sbp->s_blocks_per_segment);
 	if (nilfs->ns_blocks_per_segment < NILFS_SEG_MIN_BLOCKS) {
-		printk(KERN_ERR "NILFS: too short segment. \n");
+		printk(KERN_ERR "NILFS: too short segment.\n");
 		return -EINVAL;
 	}
 
diff --git a/fs/ntfs/ChangeLog b/fs/ntfs/ChangeLog
deleted file mode 100644
index 37c11e194372..000000000000
--- a/fs/ntfs/ChangeLog
+++ /dev/null
@@ -1,1702 +0,0 @@
-ToDo/Notes:
-	- Find and fix bugs.
-	- The only places in the kernel where a file is resized are
-	  ntfs_file_write*() and ntfs_truncate() for both of which i_mutex is
-	  held.  Just have to be careful in read-/writepage and other helpers
-	  not running under i_mutex that we play nice.  Also need to be careful
-	  with initialized_size extension in ntfs_file_write*() and writepage.
-	  UPDATE: The only things that need to be checked are the compressed
-	  write and the other attribute resize/write cases like index
-	  attributes, etc.  For now none of these are implemented so are safe.
-	- Implement filling in of holes in aops.c::ntfs_writepage() and its
-	  helpers.
-	- Implement mft.c::sync_mft_mirror_umount().  We currently will just
-	  leave the volume dirty on umount if the final iput(vol->mft_ino)
-	  causes a write of any mirrored mft records due to the mft mirror
-	  inode having been discarded already.  Whether this can actually ever
-	  happen is unclear however so it is worth waiting until someone hits
-	  the problem.
-
-2.1.29 - Fix a deadlock at mount time.
-
-	- During mount the VFS holds s_umount lock on the superblock.  So when
-	  we try to empty the journal $LogFile contents by calling
-	  ntfs_attr_set() when the machine does not have much memory and the
-	  journal is large ntfs_attr_set() results in the VM trying to balance
-	  dirty pages which in turn tries to that the s_umount lock and thus we
-	  get a deadlock.  The solution is to not use ntfs_attr_set() and
-	  instead do the zeroing by hand at the block level rather than page
-	  cache level.
-	- Fix sparse warnings.
-
-2.1.28 - Fix a deadlock.
-
-	- Fix deadlock in fs/ntfs/inode.c::ntfs_put_inode().  Thanks to Sergey
-	  Vlasov for the report and detailed analysis of the deadlock.  The fix
-	  involved getting rid of ntfs_put_inode() altogether and hence NTFS no
-	  longer has a ->put_inode super operation.
-
-2.1.27 - Various bug fixes and cleanups.
-
-	- Fix two compiler warnings on Alpha.  Thanks to Andrew Morton for
-	  reporting them.
-	- Fix an (innocent) off-by-one error in the runlist code.
-	- Fix a buggette in an "should be impossible" case handling where we
-	  continued the attribute lookup loop instead of aborting it.
-	- Use buffer_migrate_page() for the ->migratepage function of all ntfs
-	  address space operations.
-	- Fix comparison of $MFT and $MFTMirr to not bail out when there are
-	  unused, invalid mft records which are the same in both $MFT and
-	  $MFTMirr.
-	- Add support for sparse files which have a compression unit of 0.
-	- Remove all the make_bad_inode() calls.  This should only be called
-	  from read inode and new inode code paths.
-	- Limit name length in fs/ntfs/unistr.c::ntfs_nlstoucs() to maximum
-	  allowed by NTFS, i.e. 255 Unicode characters, not including the
-	  terminating NULL (which is not stored on disk).
-	- Improve comments on file attribute flags in fs/ntfs/layout.h.
-	- Fix a bug in fs/ntfs/inode.c::ntfs_read_locked_index_inode() where we
-	  forgot to update a temporary variable so loading index inodes which
-	  have an index allocation attribute failed.
-	- Add a missing call to flush_dcache_mft_record_page() in
-	  fs/ntfs/inode.c::ntfs_write_inode().
-	- Handle the recently introduced -ENAMETOOLONG return value from
-	  fs/ntfs/unistr.c::ntfs_nlstoucs() in fs/ntfs/namei.c::ntfs_lookup().
-	- Semaphore to mutex conversion.  (Ingo Molnar)
-
-2.1.26 - Minor bug fixes and updates.
-
-	- Fix a potential overflow in file.c where a cast to s64 was missing in
-	  a left shift of a page index.
-	- The struct inode has had its i_sem semaphore changed to a mutex named
-	  i_mutex.
-	- We have struct kmem_cache now so use it instead of the typedef
-	  kmem_cache_t.  (Pekka Enberg)
-	- Implement support for sector sizes above 512 bytes (up to the maximum
-	  supported by NTFS which is 4096 bytes).
-	- Do more detailed reporting of why we cannot mount read-write by
-	  special casing the VOLUME_MODIFIED_BY_CHKDSK flag.
-	- Miscellaneous updates to layout.h.
-	- Cope with attribute list attribute having invalid flags.  Windows
-	  copes with this and even chkdsk does not detect or fix this so we
-	  have to cope with it, too.  Thanks to Pawel Kot for reporting the
-	  problem.
-
-2.1.25 - (Almost) fully implement write(2) and truncate(2).
-
-	- Change ntfs_map_runlist_nolock(), ntfs_attr_find_vcn_nolock() and
-	  {__,}ntfs_cluster_free() to also take an optional attribute search
-	  context as argument.  This allows calling these functions with the
-	  mft record mapped.  Update all callers.
-	- Fix potential deadlock in ntfs_mft_data_extend_allocation_nolock()
-	  error handling by passing in the active search context when calling
-	  ntfs_cluster_free().
-	- Change ntfs_cluster_alloc() to take an extra boolean parameter
-	  specifying whether the cluster are being allocated to extend an
-	  attribute or to fill a hole.
-	- Change ntfs_attr_make_non_resident() to call ntfs_cluster_alloc()
-	  with @is_extension set to TRUE and remove the runlist terminator
-	  fixup code as this is now done by ntfs_cluster_alloc().
-	- Change ntfs_attr_make_non_resident to take the attribute value size
-	  as an extra parameter.  This is needed since we need to know the size
-	  before we can map the mft record and our callers always know it.  The
-	  reason we cannot simply read the size from the vfs inode i_size is
-	  that this is not necessarily uptodate.  This happens when
-	  ntfs_attr_make_non_resident() is called in the ->truncate call path.
-	- Fix ntfs_attr_make_non_resident() to update the vfs inode i_blocks
-	  which is zero for a resident attribute but should no longer be zero
-	  once the attribute is non-resident as it then has real clusters
-	  allocated.
-	- Add fs/ntfs/attrib.[hc]::ntfs_attr_extend_allocation(), a function to
-	  extend the allocation of an attributes.  Optionally, the data size,
-	  but not the initialized size can be extended, too.
-	- Implement fs/ntfs/inode.[hc]::ntfs_truncate().  It only supports
-	  uncompressed and unencrypted files and it never creates sparse files
-	  at least for the moment (making a file sparse requires us to modify
-	  its directory entries and we do not support directory operations at
-	  the moment).  Also, support for highly fragmented files, i.e. ones
-	  whose data attribute is split across multiple extents, is severly
-	  limited.  When such a case is encountered, EOPNOTSUPP is returned.
-	- Enable ATTR_SIZE attribute changes in ntfs_setattr().  This completes
-	  the initial implementation of file truncation.  Now both open(2)ing
-	  a file with the O_TRUNC flag and the {,f}truncate(2) system calls
-	  will resize a file appropriately.  The limitations are that only
-	  uncompressed and unencrypted files are supported.  Also, there is
-	  only very limited support for highly fragmented files (the ones whose
-	  $DATA attribute is split into multiple attribute extents).
-	- In attrib.c::ntfs_attr_set() call balance_dirty_pages_ratelimited()
-	  and cond_resched() in the main loop as we could be dirtying a lot of
-	  pages and this ensures we play nice with the VM and the system as a
-	  whole.
-	- Implement file operations ->write, ->aio_write, ->writev for regular
-	  files.  This replaces the old use of generic_file_write(), et al and
-	  the address space operations ->prepare_write and ->commit_write.
-	  This means that both sparse and non-sparse (unencrypted and
-	  uncompressed) files can now be extended using the normal write(2)
-	  code path.  There are two limitations at present and these are that
-	  we never create sparse files and that we only have limited support
-	  for highly fragmented files, i.e. ones whose data attribute is split
-	  across multiple extents.   When such a case is encountered,
-	  EOPNOTSUPP is returned.
-	- $EA attributes can be both resident and non-resident.
-	- Use %z for size_t to fix compilation warnings.  (Andrew Morton)
-	- Fix compilation warnings with gcc-4.0.2 on SUSE 10.0.
-	- Document extended attribute ($EA) NEED_EA flag.  (Based on libntfs
-	  patch by Yura Pakhuchiy.)
-
-2.1.24 - Lots of bug fixes and support more clean journal states.
-
-	- Support journals ($LogFile) which have been modified by chkdsk.  This
-	  means users can boot into Windows after we marked the volume dirty.
-	  The Windows boot will run chkdsk and then reboot.  The user can then
-	  immediately boot into Linux rather than having to do a full Windows
-	  boot first before rebooting into Linux and we will recognize such a
-	  journal and empty it as it is clean by definition.  Note, this only
-	  works if chkdsk left the journal in an obviously clean state.
-	- Support journals ($LogFile) with only one restart page as well as
-	  journals with two different restart pages.  We sanity check both and
-	  either use the only sane one or the more recent one of the two in the
-	  case that both are valid.
-	- Add fs/ntfs/malloc.h::ntfs_malloc_nofs_nofail() which is analogous to
-	  ntfs_malloc_nofs() but it performs allocations with __GFP_NOFAIL and
-	  hence cannot fail.
-	- Use ntfs_malloc_nofs_nofail() in the two critical regions in
-	  fs/ntfs/runlist.c::ntfs_runlists_merge().  This means we no longer
-	  need to panic() if the allocation fails as it now cannot fail.
-	- Fix two nasty runlist merging bugs that had gone unnoticed so far.
-	  Thanks to Stefano Picerno for the bug report.
-	- Remove two bogus BUG_ON()s from fs/ntfs/mft.c.
-	- Fix handling of valid but empty mapping pairs array in
-	  fs/ntfs/runlist.c::ntfs_mapping_pairs_decompress().
-	- Report unrepresentable inodes during ntfs_readdir() as KERN_WARNING
-	  messages and include the inode number.  Thanks to Yura Pakhuchiy for
-	  pointing this out.
-	- Change ntfs_rl_truncate_nolock() to throw away the runlist if the new
-	  length is zero.
-	- Add runlist.[hc]::ntfs_rl_punch_nolock() which punches a caller
-	  specified hole into a runlist.
-	- Fix a bug in fs/ntfs/index.c::ntfs_index_lookup().  When the returned
-	  index entry is in the index root, we forgot to set the @ir pointer in
-	  the index context.  Thanks to Yura Pakhuchiy for finding this bug.
-	- Remove bogus setting of PageError in ntfs_read_compressed_block().
-	- Add fs/ntfs/attrib.[hc]::ntfs_resident_attr_value_resize().
-	- Fix a bug in ntfs_map_runlist_nolock() where we forgot to protect
-	  access to the allocated size in the ntfs inode with the size lock.
-	- Fix ntfs_attr_vcn_to_lcn_nolock() and ntfs_attr_find_vcn_nolock() to
-	  return LCN_ENOENT when there is no runlist and the allocated size is
-	  zero.
-	- Fix load_attribute_list() to handle the case of a NULL runlist.
-	- Fix handling of sparse attributes in ntfs_attr_make_non_resident().
-	- Add BUG() checks to ntfs_attr_make_non_resident() and ntfs_attr_set()
-	  to ensure that these functions are never called for compressed or
-	  encrypted attributes.
-	- Fix cluster (de)allocators to work when the runlist is NULL and more
-	  importantly to take a locked runlist rather than them locking it
-	  which leads to lock reversal.
-	- Truncate {a,c,m}time to the ntfs supported time granularity when
-	  updating the times in the inode in ntfs_setattr().
-	- Fixup handling of sparse, compressed, and encrypted attributes in
-	  fs/ntfs/inode.c::ntfs_read_locked_{,attr_,index_}inode(),
-	  fs/ntfs/aops.c::ntfs_{read,write}page().
-	- Make ntfs_write_block() not instantiate sparse blocks if they contain
-	  only zeroes.
-	- Optimize fs/ntfs/aops.c::ntfs_write_block() by extending the page
-	  lock protection over the buffer submission for i/o which allows the
-	  removal of the get_bh()/put_bh() pairs for each buffer.
-	- Fix fs/ntfs/aops.c::ntfs_{read,write}_block() to handle the case
-	  where a concurrent truncate has truncated the runlist under our feet.
-	- Fix page_has_buffers()/page_buffers() handling in fs/ntfs/aops.c.
-	- In fs/ntfs/aops.c::ntfs_end_buffer_async_read(), use a bit spin lock
-	  in the first buffer head instead of a driver global spin lock to
-	  improve scalability.
-	- Minor fix to error handling and error message display in
-	  fs/ntfs/aops.c::ntfs_prepare_nonresident_write().
-	- Change the mount options {u,f,d}mask to always parse the number as
-	  an octal number to conform to how chmod(1) works, too.  Thanks to
-	  Giuseppe Bilotta and Horst von Brand for pointing out the errors of
-	  my ways.
-	- Fix various bugs in the runlist merging code.  (Based on libntfs
-	  changes by Richard Russon.)
-	- Fix sparse warnings that have crept in over time.
-	- Change ntfs_cluster_free() to require a write locked runlist on entry
-	  since we otherwise get into a lock reversal deadlock if a read locked
-	  runlist is passed in. In the process also change it to take an ntfs
-	  inode instead of a vfs inode as parameter.
-	- Fix the definition of the CHKD ntfs record magic.  It had an off by
-	  two error causing it to be CHKB instead of CHKD.
-	- Fix a stupid bug in __ntfs_bitmap_set_bits_in_run() which caused the
-	  count to become negative and hence we had a wild memset() scribbling
-	  all over the system's ram.
-
-2.1.23 - Implement extension of resident files and make writing safe as well as
-	 many bug fixes, cleanups, and enhancements...
-
-	- Add printk rate limiting for ntfs_warning() and ntfs_error() when
-	  compiled without debug.  This avoids a possible denial of service
-	  attack.  Thanks to Carl-Daniel Hailfinger from SuSE for pointing this
-	  out.
-	- Fix compilation warnings on ia64.  (Randy Dunlap)
-	- Use i_size_{read,write}() instead of reading i_size by hand and cache
-	  the value where apropriate.
-	- Add size_lock to the ntfs_inode structure.  This is an rw spinlock
-	  and it locks against access to the inode sizes.  Note, ->size_lock
-	  is also accessed from irq context so you must use the _irqsave and
-	  _irqrestore lock and unlock functions, respectively.  Protect all
-	  accesses to allocated_size, initialized_size, and compressed_size.
-	- Minor optimization to fs/ntfs/super.c::ntfs_statfs() and its helpers.
-	- Implement extension of resident files in the regular file write code
-	  paths (fs/ntfs/aops.c::ntfs_{prepare,commit}_write()).  At present
-	  this only works until the data attribute becomes too big for the mft
-	  record after which we abort the write returning -EOPNOTSUPP from
-	  ntfs_prepare_write().
-	- Add disable_sparse mount option together with a per volume sparse
-	  enable bit which is set appropriately and a per inode sparse disable
-	  bit which is preset on some system file inodes as appropriate.
-	- Enforce that sparse support is disabled on NTFS volumes pre 3.0.
-	- Fix a bug in fs/ntfs/runlist.c::ntfs_mapping_pairs_decompress() in
-	  the creation of the unmapped runlist element for the base attribute
-	  extent.
-	- Split ntfs_map_runlist() into ntfs_map_runlist() and a non-locking
-	  helper ntfs_map_runlist_nolock() which is used by ntfs_map_runlist().
-	  This allows us to map runlist fragments with the runlist lock already
-	  held without having to drop and reacquire it around the call.  Adapt
-	  all callers.
-	- Change ntfs_find_vcn() to ntfs_find_vcn_nolock() which takes a locked
-	  runlist.  This allows us to find runlist elements with the runlist
-	  lock already held without having to drop and reacquire it around the
-	  call.  Adapt all callers.
-	- Change time to u64 in time.h::ntfs2utc() as it otherwise generates a
-	  warning in the do_div() call on sparc32.  Thanks to Meelis Roos for
-	  the report and analysis of the warning.
-	- Fix a nasty runlist merge bug when merging two holes.
-	- Set the ntfs_inode->allocated_size to the real allocated size in the
-	  mft record for resident attributes (fs/ntfs/inode.c).
-	- Small readability cleanup to use "a" instead of "ctx->attr"
-	  everywhere (fs/ntfs/inode.c).
-	- Make fs/ntfs/namei.c::ntfs_get_{parent,dentry} static and move the
-	  definition of ntfs_export_ops from fs/ntfs/super.c to namei.c.  Also,
-	  declare ntfs_export_ops in fs/ntfs/ntfs.h.
-	- Correct sparse file handling.  The compressed values need to be
-	  checked and set in the ntfs inode as done for compressed files and
-	  the compressed size needs to be used for vfs inode->i_blocks instead
-	  of the allocated size, again, as done for compressed files.
-	- Add AT_EA in addition to AT_DATA to whitelist for being allowed to be
-	  non-resident in fs/ntfs/attrib.c::ntfs_attr_can_be_non_resident().
-	- Add fs/ntfs/attrib.c::ntfs_attr_vcn_to_lcn_nolock() used by the new
-	  write code.
-	- Fix bug in fs/ntfs/attrib.c::ntfs_find_vcn_nolock() where after
-	  dropping the read lock and taking the write lock we were not checking
-	  whether someone else did not already do the work we wanted to do.
-	- Rename fs/ntfs/attrib.c::ntfs_find_vcn_nolock() to
-	  ntfs_attr_find_vcn_nolock() and update all callers.
-	- Add fs/ntfs/attrib.[hc]::ntfs_attr_make_non_resident().
-	- Fix sign of various error return values to be negative in
-	  fs/ntfs/lcnalloc.c.
-	- Modify ->readpage and ->writepage (fs/ntfs/aops.c) so they detect and
-	  handle the case where an attribute is converted from resident to
-	  non-resident by a concurrent file write.
-	- Remove checks for NULL before calling kfree() since kfree() does the
-	  checking itself.  (Jesper Juhl)
-	- Some utilities modify the boot sector but do not update the checksum.
-	  Thus, relax the checking in fs/ntfs/super.c::is_boot_sector_ntfs() to
-	  only emit a warning when the checksum is incorrect rather than
-	  refusing the mount.  Thanks to Bernd Casimir for pointing this
-	  problem out.
-	- Update attribute definition handling.
-	- Add NTFS_MAX_CLUSTER_SIZE and NTFS_MAX_PAGES_PER_CLUSTER constants.
-	- Use NTFS_MAX_CLUSTER_SIZE in super.c instead of hard coding 0x10000.
-	- Use MAX_BUF_PER_PAGE instead of variable sized array allocation for
-	  better code generation and one less sparse warning in fs/ntfs/aops.c.
-	- Remove spurious void pointer casts from fs/ntfs/.  (Pekka Enberg)
-	- Use C99 style structure initialization after memory allocation where
-	  possible (fs/ntfs/{attrib.c,index.c,super.c}).  Thanks to Al Viro and
-	  Pekka Enberg.
-	- Stamp the transaction log ($UsnJrnl), aka user space journal, if it
-	  is active on the volume and we are mounting read-write or remounting
-	  from read-only to read-write.
-	- Fix a bug in address space operations error recovery code paths where
-	  if the runlist was not mapped at all and a mapping error occured we
-	  would leave the runlist locked on exit to the function so that the
-	  next access to the same file would try to take the lock and deadlock.
-	- Detect the case when Windows has been suspended to disk on the volume
-	  to be mounted and if this is the case do not allow (re)mounting
-	  read-write.  This is done by parsing hiberfil.sys if present.
-	- Fix several occurences of a bug where we would perform 'var & ~const'
-	  with a 64-bit variable and a int, i.e. 32-bit, constant.  This causes
-	  the higher order 32-bits of the 64-bit variable to be zeroed.  To fix
-	  this cast the 'const' to the same 64-bit type as 'var'.
-	- Change the runlist terminator of the newly allocated cluster(s) to
-	  LCN_ENOENT in ntfs_attr_make_non_resident().  Otherwise the runlist
-	  code gets confused.
-	- Add an extra parameter @last_vcn to ntfs_get_size_for_mapping_pairs()
-	  and ntfs_mapping_pairs_build() to allow the runlist encoding to be
-	  partial which is desirable when filling holes in sparse attributes.
-	  Update all callers.
-	- Change ntfs_map_runlist_nolock() to only decompress the mapping pairs
-	  if the requested vcn is inside it.  Otherwise we get into problems
-	  when we try to map an out of bounds vcn because we then try to map
-	  the already mapped runlist fragment which causes
-	  ntfs_mapping_pairs_decompress() to fail and return error.  Update
-	  ntfs_attr_find_vcn_nolock() accordingly.
-	- Fix a nasty deadlock that appeared in recent kernels.
-	  The situation: VFS inode X on a mounted ntfs volume is dirty.  For
-	  same inode X, the ntfs_inode is dirty and thus corresponding on-disk
-	  inode, i.e. mft record, which is in a dirty PAGE_CACHE_PAGE belonging
-	  to the table of inodes, i.e. $MFT, inode 0.
-	  What happens:
-	  Process 1: sys_sync()/umount()/whatever...  calls
-	  __sync_single_inode() for $MFT -> do_writepages() -> write_page for
-	  the dirty page containing the on-disk inode X, the page is now locked
-	  -> ntfs_write_mst_block() which clears PageUptodate() on the page to
-	  prevent anyone else getting hold of it whilst it does the write out.
-	  This is necessary as the on-disk inode needs "fixups" applied before
-	  the write to disk which are removed again after the write and
-	  PageUptodate is then set again.  It then analyses the page looking
-	  for dirty on-disk inodes and when it finds one it calls
-	  ntfs_may_write_mft_record() to see if it is safe to write this
-	  on-disk inode.  This then calls ilookup5() to check if the
-	  corresponding VFS inode is in icache().  This in turn calls ifind()
-	  which waits on the inode lock via wait_on_inode whilst holding the
-	  global inode_lock.
-	  Process 2: pdflush results in a call to __sync_single_inode for the
-	  same VFS inode X on the ntfs volume.  This locks the inode (I_LOCK)
-	  then calls write-inode -> ntfs_write_inode -> map_mft_record() ->
-	  read_cache_page() for the page (in page cache of table of inodes
-	  $MFT, inode 0) containing the on-disk inode.  This page has
-	  PageUptodate() clear because of Process 1 (see above) so
-	  read_cache_page() blocks when it tries to take the page lock for the
-	  page so it can call ntfs_read_page().
-	  Thus Process 1 is holding the page lock on the page containing the
-	  on-disk inode X and it is waiting on the inode X to be unlocked in
-	  ifind() so it can write the page out and then unlock the page.
-	  And Process 2 is holding the inode lock on inode X and is waiting for
-	  the page to be unlocked so it can call ntfs_readpage() or discover
-	  that Process 1 set PageUptodate() again and use the page.
-	  Thus we have a deadlock due to ifind() waiting on the inode lock.
-	  The solution: The fix is to use the newly introduced
-	  ilookup5_nowait() which does not wait on the inode's lock and hence
-	  avoids the deadlock.  This is safe as we do not care about the VFS
-	  inode and only use the fact that it is in the VFS inode cache and the
-	  fact that the vfs and ntfs inodes are one struct in memory to find
-	  the ntfs inode in memory if present.  Also, the ntfs inode has its
-	  own locking so it does not matter if the vfs inode is locked.
-	- Fix bug in mft record writing where we forgot to set the device in
-	  the buffers when mapping them after the VM had discarded them.
-	  Thanks to Martin MOKREJÅ for the bug report.
-
-2.1.22 - Many bug and race fixes and error handling improvements.
-
-	- Improve error handling in fs/ntfs/inode.c::ntfs_truncate().
-	- Change fs/ntfs/inode.c::ntfs_truncate() to return an error code
-	  instead of void and provide a helper ntfs_truncate_vfs() for the
-	  vfs ->truncate method.
-	- Add a new ntfs inode flag NInoTruncateFailed() and modify
-	  fs/ntfs/inode.c::ntfs_truncate() to set and clear it appropriately.
-	- Fix min_size and max_size definitions in ATTR_DEF structure in
-	  fs/ntfs/layout.h to be signed.
-	- Add attribute definition handling helpers to fs/ntfs/attrib.[hc]:
-	  ntfs_attr_size_bounds_check(), ntfs_attr_can_be_non_resident(), and
-	  ntfs_attr_can_be_resident(), which in turn use the new private helper
-	  ntfs_attr_find_in_attrdef().
-	- In fs/ntfs/aops.c::mark_ntfs_record_dirty(), take the
-	  mapping->private_lock around the dirtying of the buffer heads
-	  analagous to the way it is done in __set_page_dirty_buffers().
-	- Ensure the mft record size does not exceed the PAGE_CACHE_SIZE at
-	  mount time as this cannot work with the current implementation.
-	- Check for location of attribute name and improve error handling in
-	  general in fs/ntfs/inode.c::ntfs_read_locked_inode() and friends.
-	- In fs/ntfs/aops.c::ntfs_writepage(), if the page is fully outside
-	  i_size, i.e. race with truncate, invalidate the buffers on the page
-	  so that they become freeable and hence the page does not leak.
-	- Remove unused function fs/ntfs/runlist.c::ntfs_rl_merge().  (Adrian
-	  Bunk)
-	- Fix stupid bug in fs/ntfs/attrib.c::ntfs_attr_find() that resulted in
-	  a NULL pointer dereference in the error code path when a corrupt
-	  attribute was found.  (Thanks to Domen Puncer for the bug report.)
-	- Add MODULE_VERSION() to fs/ntfs/super.c.
-	- Make several functions and variables static.  (Adrian Bunk)
-	- Modify fs/ntfs/aops.c::mark_ntfs_record_dirty() so it allocates
-	  buffers for the page if they are not present and then marks the
-	  buffers belonging to the ntfs record dirty.  This causes the buffers
-	  to become busy and hence they are safe from removal until the page
-	  has been written out.
-	- Fix stupid bug in fs/ntfs/attrib.c::ntfs_external_attr_find() in the
-	  error handling code path that resulted in a BUG() due to trying to
-	  unmap an extent mft record when the mapping of it had failed and it
-	  thus was not mapped.  (Thanks to Ken MacFerrin for the bug report.)
-	- Drop the runlist lock after the vcn has been read in
-	  fs/ntfs/lcnalloc.c::__ntfs_cluster_free().
-	- Rewrite handling of multi sector transfer errors.  We now do not set
-	  PageError() when such errors are detected in the async i/o handler
-	  fs/ntfs/aops.c::ntfs_end_buffer_async_read().  All users of mst
-	  protected attributes now check the magic of each ntfs record as they
-	  use it and act appropriately.  This has the effect of making errors
-	  granular per ntfs record rather than per page which solves the case
-	  where we cannot access any of the ntfs records in a page when a
-	  single one of them had an mst error.  (Thanks to Ken MacFerrin for
-	  the bug report.)
-	- Fix error handling in fs/ntfs/quota.c::ntfs_mark_quotas_out_of_date()
-	  where we failed to release i_mutex on the $Quota/$Q attribute inode.
-	- Fix bug in handling of bad inodes in fs/ntfs/namei.c::ntfs_lookup().
-	- Add mapping of unmapped buffers to all remaining code paths, i.e.
-	  fs/ntfs/aops.c::ntfs_write_mst_block(), mft.c::ntfs_sync_mft_mirror(),
-	  and write_mft_record_nolock().  From now on we require that the
-	  complete runlist for the mft mirror is always mapped into memory.
-	- Add creation of buffers to fs/ntfs/mft.c::ntfs_sync_mft_mirror().
-	- Improve error handling in fs/ntfs/aops.c::ntfs_{read,write}_block().
-	- Cleanup fs/ntfs/aops.c::ntfs_{read,write}page() since we know that a
-	  resident attribute will be smaller than a page which makes the code
-	  simpler.  Also make the code more tolerant to concurrent ->truncate.
-
-2.1.21 - Fix some races and bugs, rewrite mft write code, add mft allocator.
-
-	- Implement extent mft record deallocation
-	  fs/ntfs/mft.c::ntfs_extent_mft_record_free().
-	- Splitt runlist related functions off from attrib.[hc] to runlist.[hc].
-	- Add vol->mft_data_pos and initialize it at mount time.
-	- Rename init_runlist() to ntfs_init_runlist(), ntfs_vcn_to_lcn() to
-	  ntfs_rl_vcn_to_lcn(), decompress_mapping_pairs() to
-	  ntfs_mapping_pairs_decompress(), ntfs_merge_runlists() to
-	  ntfs_runlists_merge() and adapt all callers.
-	- Add fs/ntfs/runlist.[hc]::ntfs_get_nr_significant_bytes(),
-	  ntfs_get_size_for_mapping_pairs(), ntfs_write_significant_bytes(),
-	  and ntfs_mapping_pairs_build(), adapted from libntfs.
-	- Make fs/ntfs/lcnalloc.c::ntfs_cluster_free_from_rl_nolock() not
-	  static and add a declaration for it to lcnalloc.h.
-	- Add fs/ntfs/lcnalloc.h::ntfs_cluster_free_from_rl() which is a static
-	  inline wrapper for ntfs_cluster_free_from_rl_nolock() which takes the
-	  cluster bitmap lock for the duration of the call.
-	- Add fs/ntfs/attrib.[hc]::ntfs_attr_record_resize().
-	- Implement the equivalent of memset() for an ntfs attribute in
-	  fs/ntfs/attrib.[hc]::ntfs_attr_set() and switch
-	  fs/ntfs/logfile.c::ntfs_empty_logfile() to using it.
-	- Remove unnecessary casts from LCN_* constants.
-	- Implement fs/ntfs/runlist.c::ntfs_rl_truncate_nolock().
-	- Add MFT_RECORD_OLD as a copy of MFT_RECORD in fs/ntfs/layout.h and
-	  change MFT_RECORD to contain the NTFS 3.1+ specific fields.
-	- Add a helper function fs/ntfs/aops.c::mark_ntfs_record_dirty() which
-	  marks all buffers belonging to an ntfs record dirty, followed by
-	  marking the page the ntfs record is in dirty and also marking the vfs
-	  inode containing the ntfs record dirty (I_DIRTY_PAGES).
-	- Switch fs/ntfs/index.h::ntfs_index_entry_mark_dirty() to using the
-	  new helper fs/ntfs/aops.c::mark_ntfs_record_dirty() and remove the no
-	  longer needed fs/ntfs/index.[hc]::__ntfs_index_entry_mark_dirty().
-	- Move ntfs_{un,}map_page() from ntfs.h to aops.h and fix resulting
-	  include errors.
-	- Move the typedefs for runlist_element and runlist from types.h to
-	  runlist.h and fix resulting include errors.
-	- Remove unused {__,}format_mft_record() from fs/ntfs/mft.c.
-	- Modify fs/ntfs/mft.c::__mark_mft_record_dirty() to use the helper
-	  mark_ntfs_record_dirty() which also changes the behaviour in that we
-	  now set the buffers belonging to the mft record dirty as well as the
-	  page itself.
-	- Update fs/ntfs/mft.c::write_mft_record_nolock() and sync_mft_mirror()
-	  to cope with the fact that there now are dirty buffers in mft pages.
-	- Update fs/ntfs/inode.c::ntfs_write_inode() to also use the helper
-	  mark_ntfs_record_dirty() and thus to set the buffers belonging to the
-	  mft record dirty as well as the page itself.
-	- Fix compiler warnings on x86-64 in fs/ntfs/dir.c.  (Randy Dunlap,
-	  slightly modified by me)
-	- Add fs/ntfs/mft.c::try_map_mft_record() which fails with -EALREADY if
-	  the mft record is already locked and otherwise behaves the same way
-	  as fs/ntfs/mft.c::map_mft_record().
-	- Modify fs/ntfs/mft.c::write_mft_record_nolock() so that it only
-	  writes the mft record if the buffers belonging to it are dirty.
-	  Otherwise we assume that it was written out by other means already.
-	- Attempting to write outside initialized size is _not_ a bug so remove
-	  the bug check from fs/ntfs/aops.c::ntfs_write_mst_block().  It is in
-	  fact required to write outside initialized size when preparing to
-	  extend the initialized size.
-	- Map the page instead of using page_address() before writing to it in
-	  fs/ntfs/aops.c::ntfs_mft_writepage().
-	- Provide exclusion between opening an inode / mapping an mft record
-	  and accessing the mft record in fs/ntfs/mft.c::ntfs_mft_writepage()
-	  by setting the page not uptodate throughout ntfs_mft_writepage().
-	- Clear the page uptodate flag in fs/ntfs/aops.c::ntfs_write_mst_block()
-	  to ensure noone can see the page whilst the mst fixups are applied.
-	- Add the helper fs/ntfs/mft.c::ntfs_may_write_mft_record() which
-	  checks if an mft record may be written out safely obtaining any
-	  necessary locks in the process.  This is used by
-	  fs/ntfs/aops.c::ntfs_write_mst_block().
-	- Modify fs/ntfs/aops.c::ntfs_write_mst_block() to also work for
-	  writing mft records and improve its error handling in the process.
-	  Now if any of the records in the page fail to be written out, all
-	  other records will be written out instead of aborting completely.
-	- Remove ntfs_mft_aops and update all users to use ntfs_mst_aops.
-	- Modify fs/ntfs/inode.c::ntfs_read_locked_inode() to set the
-	  ntfs_mst_aops for all inodes which are NInoMstProtected() and
-	  ntfs_aops for all other inodes.
-	- Rename fs/ntfs/mft.c::sync_mft_mirror{,_umount}() to
-	  ntfs_sync_mft_mirror{,_umount}() and change their parameters so they
-	  no longer require an ntfs inode to be present.  Update all callers.
-	- Cleanup the error handling in fs/ntfs/mft.c::ntfs_sync_mft_mirror().
-	- Clear the page uptodate flag in fs/ntfs/mft.c::ntfs_sync_mft_mirror()
-	  to ensure noone can see the page whilst the mst fixups are applied.
-	- Remove the no longer needed fs/ntfs/mft.c::ntfs_mft_writepage() and
-	  fs/ntfs/mft.c::try_map_mft_record().
-	- Fix callers of fs/ntfs/aops.c::mark_ntfs_record_dirty() to call it
-	  with the ntfs inode which contains the page rather than the ntfs
-	  inode the mft record of which is in the page.
-	- Fix race condition in fs/ntfs/inode.c::ntfs_put_inode() by moving the
-	  index inode bitmap inode release code from there to
-	  fs/ntfs/inode.c::ntfs_clear_big_inode().  (Thanks to Christoph
-	  Hellwig for spotting this.)
-	- Fix race condition in fs/ntfs/inode.c::ntfs_put_inode() by taking the
-	  inode semaphore around the code that sets ni->itype.index.bmp_ino to
-	  NULL and reorganize the code to optimize it a bit.  (Thanks to
-	  Christoph Hellwig for spotting this.)
-	- Modify fs/ntfs/aops.c::mark_ntfs_record_dirty() to no longer take the
-	  ntfs inode as a parameter as this is confusing and misleading and the
-	  needed ntfs inode is available via NTFS_I(page->mapping->host).
-	  Adapt all callers to this change.
-	- Modify fs/ntfs/mft.c::write_mft_record_nolock() and
-	  fs/ntfs/aops.c::ntfs_write_mst_block() to only check the dirty state
-	  of the first buffer in a record and to take this as the ntfs record
-	  dirty state.  We cannot look at the dirty state for subsequent
-	  buffers because we might be racing with
-	  fs/ntfs/aops.c::mark_ntfs_record_dirty().
-	- Move the static inline ntfs_init_big_inode() from fs/ntfs/inode.c to
-	  inode.h and make fs/ntfs/inode.c::__ntfs_init_inode() non-static and
-	  add a declaration for it to inode.h.  Fix some compilation issues
-	  that resulted due to #includes and header file interdependencies.
-	- Simplify setup of i_mode in fs/ntfs/inode.c::ntfs_read_locked_inode().
-	- Add helpers fs/ntfs/layout.h::MK_MREF() and MK_LE_MREF().
-	- Modify fs/ntfs/mft.c::map_extent_mft_record() to only verify the mft
-	  record sequence number if it is specified (i.e. not zero).
-	- Add fs/ntfs/mft.[hc]::ntfs_mft_record_alloc() and various helper
-	  functions used by it.
-	- Update Documentation/filesystems/ntfs.txt with instructions on how to
-	  use the Device-Mapper driver with NTFS ftdisk/LDM raid.  This removes
-	  the linear raid problem with the Software RAID / MD driver when one
-	  or more of the devices has an odd number of sectors.
-
-2.1.20 - Fix two stupid bugs introduced in 2.1.18 release.
-
-	- Fix stupid bug in fs/ntfs/attrib.c::ntfs_attr_reinit_search_ctx()
-	  where we did not clear ctx->al_entry but it was still set due to
-	  changes in ntfs_attr_lookup() and ntfs_external_attr_find() in
-	  particular.
-	- Fix another stupid bug in fs/ntfs/attrib.c::ntfs_external_attr_find()
-	  where we forgot to unmap the extent mft record when we had finished
-	  enumerating an attribute which caused a bug check to trigger when the
-	  VFS calls ->clear_inode.
-
-2.1.19 - Many cleanups, improvements, and a minor bug fix.
-
-	- Update ->setattr (fs/ntfs/inode.c::ntfs_setattr()) to refuse to
-	  change the uid, gid, and mode of an inode as we do not support NTFS
-	  ACLs yet.
-	- Remove BKL use from ntfs_setattr() syncing up with the rest of the
-	  kernel.
-	- Get rid of the ugly transparent union in fs/ntfs/dir.c::ntfs_readdir()
-	  and ntfs_filldir() as per suggestion from Al Viro.
-	- Change '\0' and L'\0' to simply 0 as per advice from Linus Torvalds.
-	- Update ->truncate (fs/ntfs/inode.c::ntfs_truncate()) to check if the
-	  inode size has changed and to only output an error if so.
-	- Rename fs/ntfs/attrib.h::attribute_value_length() to ntfs_attr_size().
-	- Add le{16,32,64} as well as sle{16,32,64} data types to
-	  fs/ntfs/types.h.
-	- Change ntfschar to be le16 instead of u16 in fs/ntfs/types.h.
-	- Add le versions of VCN, LCN, and LSN called leVCN, leLCN, and leLSN,
-	  respectively, to fs/ntfs/types.h.
-	- Update endianness conversion macros in fs/ntfs/endian.h to use the
-	  new types as appropriate.
-	- Do proper type casting when using sle64_to_cpup() in fs/ntfs/dir.c
-	  and index.c.
-	- Add leMFT_REF data type to fs/ntfs/layout.h.
-	- Update all NTFS header files with the new little endian data types.
-	  Affected files are fs/ntfs/layout.h, logfile.h, and time.h.
-	- Do proper type casting when using ntfs_is_*_recordp() in
-	  fs/ntfs/logfile.c, mft.c, and super.c. 
-	- Fix all the sparse bitwise warnings.  Had to change all the typedef
-	  enums storing little endian values to simple enums plus a typedef for
-	  the datatype to make sparse happy.
-	- Fix a bug found by the new sparse bitwise warnings where the default
-	  upcase table was defined as a pointer to wchar_t rather than ntfschar
-	  in fs/ntfs/ntfs.h and super.c.
-	- Change {const_,}cpu_to_le{16,32}(0) to just 0 as suggested by Al Viro.
-
-2.1.18 - Fix scheduling latencies at mount time as well as an endianness bug.
-
-	- Remove vol->nr_mft_records as it was pretty meaningless and optimize
-	  the calculation of total/free inodes as used by statfs().
-	- Fix scheduling latencies in ntfs_fill_super() by dropping the BKL
-	  because the code itself is using the ntfs_lock semaphore which
-	  provides safe locking.  (Ingo Molnar)
-	- Fix a potential bug in fs/ntfs/mft.c::map_extent_mft_record() that
-	  could occur in the future for when we start closing/freeing extent
-	  inodes if we don't set base_ni->ext.extent_ntfs_inos to NULL after
-	  we free it.
-	- Rename {find,lookup}_attr() to ntfs_attr_{find,lookup}() as well as
-	  find_external_attr() to ntfs_external_attr_find() to cleanup the
-	  namespace a bit and to be more consistent with libntfs.
-	- Rename {{re,}init,get,put}_attr_search_ctx() to
-	  ntfs_attr_{{re,}init,get,put}_search_ctx() as well as the type
-	  attr_search_context to ntfs_attr_search_ctx.
-	- Force use of ntfs_attr_find() in ntfs_attr_lookup() when searching
-	  for the attribute list attribute itself.
-	- Fix endianness bug in ntfs_external_attr_find().
-	- Change ntfs_{external_,}attr_find() to return 0 on success, -ENOENT
-	  if the attribute is not found, and -EIO on real error.  In the case
-	  of -ENOENT, the search context is updated to describe the attribute
-	  before which the attribute being searched for would need to be
-	  inserted if such an action were to be desired and in the case of
-	  ntfs_external_attr_find() the search context is also updated to
-	  indicate the attribute list entry before which the attribute list
-	  entry of the attribute being searched for would need to be inserted
-	  if such an action were to be desired.  Also make ntfs_find_attr()
-	  static and remove its prototype from attrib.h as it is not used
-	  anywhere other than attrib.c.  Update ntfs_attr_lookup() and all
-	  callers of ntfs_{external,}attr_{find,lookup}() for the new return
-	  values.
-	- Minor cleanup of fs/ntfs/inode.c::ntfs_init_locked_inode().
-
-2.1.17 - Fix bugs in mount time error code paths and other updates.
-
-	- Implement bitmap modification code (fs/ntfs/bitmap.[hc]).  This
-	  includes functions to set/clear a single bit or a run of bits.
-	- Add fs/ntfs/attrib.[hc]::ntfs_find_vcn() which returns the locked
-	  runlist element containing a particular vcn.  It also takes care of
-	  mapping any needed runlist fragments.
-	- Implement cluster (de-)allocation code (fs/ntfs/lcnalloc.[hc]).
-	- Load attribute definition table from $AttrDef at mount time.
-	- Fix bugs in mount time error code paths involving (de)allocation of
-	  the default and volume upcase tables.
-	- Remove ntfs_nr_mounts as it is no longer used.
-
-2.1.16 - Implement access time updates, file sync, async io, and read/writev.
-
-	- Add support for readv/writev and aio_read/aio_write (fs/ntfs/file.c).
-	  This is done by setting the appropriate file operations pointers to
-	  the generic helper functions provided by mm/filemap.c.
-	- Implement fsync, fdatasync, and msync both for files (fs/ntfs/file.c)
-	  and directories (fs/ntfs/dir.c).
-	- Add support for {a,m,c}time updates to inode.c::ntfs_write_inode().
-	  Note, except for the root directory and any other system files opened
-	  by the user, the system files will not have their access times
-	  updated as they are only accessed at the inode level an hence the
-	  file level functions which cause the times to be updated are never
-	  invoked.
-
-2.1.15 - Invalidate quotas when (re)mounting read-write.
-
-	- Add new element itype.index.collation_rule to the ntfs inode
-	  structure and set it appropriately in ntfs_read_locked_inode().
-	- Implement a new inode type "index" to allow efficient access to the
-	  indices found in various system files and adapt inode handling
-	  accordingly (fs/ntfs/inode.[hc]).  An index inode is essentially an
-	  attribute inode (NInoAttr() is true) with an attribute type of
-	  AT_INDEX_ALLOCATION.  As such, it is no longer allowed to call
-	  ntfs_attr_iget() with an attribute type of AT_INDEX_ALLOCATION as
-	  there would be no way to distinguish between normal attribute inodes
-	  and index inodes.  The function to obtain an index inode is
-	  ntfs_index_iget() and it uses the helper function
-	  ntfs_read_locked_index_inode().  Note, we do not overload
-	  ntfs_attr_iget() as indices consist of multiple attributes so using
-	  ntfs_attr_iget() to obtain an index inode would be confusing.
-	- Ensure that there is no overflow when doing page->index <<
-	  PAGE_CACHE_SHIFT by casting page->index to s64 in fs/ntfs/aops.c.
-	- Use atomic kmap instead of kmap() in fs/ntfs/aops.c::ntfs_read_page()
-	  and ntfs_read_block().
-	- Use case sensitive attribute lookups instead of case insensitive ones.
-	- Lock all page cache pages belonging to mst protected attributes while
-	  accessing them to ensure we never see corrupt data while the page is
-	  under writeout.
-	- Add framework for generic ntfs collation (fs/ntfs/collation.[hc]).
-	  We have ntfs_is_collation_rule_supported() to check if the collation
-	  rule you want to use is supported and ntfs_collation() which actually
-	  collates two data items.  We currently only support COLLATION_BINARY
-	  and COLLATION_NTOFS_ULONG but support for other collation rules will
-	  be added as the need arises.
-	- Add a new type, ntfs_index_context, to allow retrieval of an index
-	  entry using the corresponding index key.  To get an index context,
-	  use ntfs_index_ctx_get() and to release it, use ntfs_index_ctx_put().
-	  This also adds a new slab cache for the index contexts.  To lookup a
-	  key in an index inode, use ntfs_index_lookup().  After modifying an
-	  index entry, call ntfs_index_entry_flush_dcache_page() followed by
-	  ntfs_index_entry_mark_dirty() to ensure the changes are written out
-	  to disk.  For details see fs/ntfs/index.[hc].  Note, at present, if
-	  an index entry is in the index allocation attribute rather than the
-	  index root attribute it will not be written out (you will get a
-	  warning message about discarded changes instead).
-	- Load the quota file ($Quota) and check if quota tracking is enabled
-	  and if so, mark the quotas out of date.  This causes windows to
-	  rescan the volume on boot and update all quota entries.
-	- Add a set_page_dirty address space operation for ntfs_m[fs]t_aops.
-	  It is simply set to __set_page_dirty_nobuffers() to make sure that
-	  running set_page_dirty() on a page containing mft/ntfs records will
-	  not affect the dirty state of the page buffers.
-	- Add fs/ntfs/index.c::__ntfs_index_entry_mark_dirty() which sets all
-	  buffers that are inside the ntfs record in the page dirty after which
-	  it sets the page dirty.  This allows ->writepage to only write the
-	  dirty index records rather than having to write all the records in
-	  the page.  Modify fs/ntfs/index.h::ntfs_index_entry_mark_dirty() to
-	  use this rather than __set_page_dirty_nobuffers().
-	- Implement fs/ntfs/aops.c::ntfs_write_mst_block() which enables the
-	  writing of page cache pages belonging to mst protected attributes
-	  like the index allocation attribute in directory indices and other
-	  indices like $Quota/$Q, etc.  This means that the quota is now marked
-	  out of date on all volumes rather than only on ones where the quota
-	  defaults entry is in the index root attribute of the $Quota/$Q index.
-
-2.1.14 - Fix an NFSd caused deadlock reported by several users.
-
-	- Modify fs/ntfs/ntfs_readdir() to copy the index root attribute value
-	  to a buffer so that we can put the search context and unmap the mft
-	  record before calling the filldir() callback.  We need to do this
-	  because of NFSd which calls ->lookup() from its filldir callback()
-	  and this causes NTFS to deadlock as ntfs_lookup() maps the mft record
-	  of the directory and since ntfs_readdir() has got it mapped already
-	  ntfs_lookup() deadlocks.
-
-2.1.13 - Enable overwriting of resident files and housekeeping of system files.
-
-	- Implement writing of mft records (fs/ntfs/mft.[hc]), which includes
-	  keeping the mft mirror in sync with the mft when mirrored mft records
-	  are written.  The functions are write_mft_record{,_nolock}().  The
-	  implementation is quite rudimentary for now with lots of things not
-	  implemented yet but I am not sure any of them can actually occur so
-	  I will wait for people to hit each one and only then implement it.
-	- Commit open system inodes at umount time.  This should make it
-	  virtually impossible for sync_mft_mirror_umount() to ever be needed.
-	- Implement ->write_inode (fs/ntfs/inode.c::ntfs_write_inode()) for the
-	  ntfs super operations.  This gives us inode writing via the VFS inode
-	  dirty code paths.  Note:  Access time updates are not implemented yet.
-	- Implement fs/ntfs/mft.[hc]::{,__}mark_mft_record_dirty() and make
-	  fs/ntfs/aops.c::ntfs_writepage() and ntfs_commit_write() use it, thus
-	  finally enabling resident file overwrite!  (-8  This also includes a
-	  placeholder for ->writepage (ntfs_mft_writepage()), which for now
-	  just redirties the page and returns.  Also, at umount time, we for
-	  now throw away all mft data page cache pages after the last call to
-	  ntfs_commit_inode() in the hope that all inodes will have been
-	  written out by then and hence no dirty (meta)data will be lost.  We
-	  also check for this case and emit an error message telling the user
-	  to run chkdsk.
-	- Use set_page_writeback() and end_page_writeback() in the resident
-	  attribute code path of fs/ntfs/aops.c::ntfs_writepage() otherwise
-	  the radix-tree tag PAGECACHE_TAG_DIRTY remains set even though the
-	  page is clean.
-	- Implement ntfs_mft_writepage() so it now checks if any of the mft
-	  records in the page are dirty and if so redirties the page and
-	  returns.  Otherwise it just returns (after doing set_page_writeback(),
-	  unlock_page(), end_page_writeback() or the radix-tree tag
-	  PAGECACHE_TAG_DIRTY remains set even though the page is clean), thus
-	  alowing the VM to do with the page as it pleases.  Also, at umount
-	  time, now only throw away dirty mft (meta)data pages if dirty inodes
-	  are present and ask the user to email us if they see this happening.
-	- Add functions ntfs_{clear,set}_volume_flags(), to modify the volume
-	  information flags (fs/ntfs/super.c).
-	- Mark the volume dirty when (re)mounting read-write and mark it clean
-	  when unmounting or remounting read-only.  If any volume errors are
-	  found, the volume is left marked dirty to force chkdsk to run.
-	- Add code to set the NT4 compatibility flag when (re)mounting
-	  read-write for newer NTFS versions but leave it commented out for now
-	  since we do not make any modifications that are NTFS 1.2 specific yet
-	  and since setting this flag breaks Captive-NTFS which is not nice.
-	  This code must be enabled once we start writing NTFS 1.2 specific
-	  changes otherwise Windows NTFS driver might crash / cause corruption.
-
-2.1.12 - Fix the second fix to the decompression engine and some cleanups.
-
-	- Add a new address space operations struct, ntfs_mst_aops, for mst
-	  protected attributes.  This is because the default ntfs_aops do not
-	  make sense with mst protected data and were they to write anything to
-	  such an attribute they would cause data corruption so we provide
-	  ntfs_mst_aops which does not have any write related operations set.
-	- Cleanup dirty ntfs inode handling (fs/ntfs/inode.[hc]) which also
-	  includes an adapted ntfs_commit_inode() and an implementation of
-	  ntfs_write_inode() which for now just cleans dirty inodes without
-	  writing them (it does emit a warning that this is happening).
-	- Undo the second decompression engine fix (see 2.1.9 release ChangeLog
-	  entry) as it was only fixing a theoretical bug but at the same time
-	  it badly broke the handling of sparse and uncompressed compression
-	  blocks.
-
-2.1.11 - Driver internal cleanups.
-
-	- Only build logfile.o if building the driver with read-write support.
-	- Really final white space cleanups.
-	- Use generic_ffs() instead of ffs() in logfile.c which allows the
-	  log_page_size variable to be optimized by gcc into a constant.
-	- Rename uchar_t to ntfschar everywhere as uchar_t is unsigned 1-byte
-	  char as defined by POSIX and as found on some systems.
-
-2.1.10 - Force read-only (re)mounting of volumes with unsupported volume flags.
-
-	- Finish off the white space cleanups (remove trailing spaces, etc).
-	- Clean up ntfs_fill_super() and ntfs_read_inode_mount() by removing
-	  the kludges around the first iget().  Instead of (re)setting ->s_op
-	  we have the $MFT inode set up by explicit new_inode() / set ->i_ino /
-	  insert_inode_hash() / call ntfs_read_inode_mount() directly.  This
-	  kills the need for second super_operations and allows to return error
-	  from ntfs_read_inode_mount() without resorting to ugly "poisoning"
-	  tricks.  (Al Viro)
-	- Force read-only (re)mounting if any of the following bits are set in
-	  the volume information flags:
-	  	VOLUME_IS_DIRTY, VOLUME_RESIZE_LOG_FILE,
-		VOLUME_UPGRADE_ON_MOUNT, VOLUME_DELETE_USN_UNDERWAY,
-		VOLUME_REPAIR_OBJECT_ID, VOLUME_MODIFIED_BY_CHKDSK
-	  To make this easier we define VOLUME_MUST_MOUNT_RO_MASK with all the
-	  above bits set so the test is made easy.
-
-2.1.9 - Fix two bugs in decompression engine.
-
-	- Fix a bug where we would not always detect that we have reached the
-	  end of a compression block because we were ending at minus one byte
-	  which is effectively the same as being at the end.  The fix is to
-	  check whether the uncompressed buffer has been fully filled and if so
-	  we assume we have reached the end of the compression block.  A big
-	  thank you to Marcin Gibuła for the bug report, the assistance in
-	  tracking down the bug and testing the fix.
-	- Fix a possible bug where when a compressed read is truncated to the
-	  end of the file, the offset inside the last page was not truncated.
-
-2.1.8 - Handle $MFT mirror and $LogFile, improve time handling, and cleanups.
-
-	- Use get_bh() instead of manual atomic_inc() in fs/ntfs/compress.c.
-	- Modify fs/ntfs/time.c::ntfs2utc(), get_current_ntfs_time(), and
-	  utc2ntfs() to work with struct timespec instead of time_t on the
-	  Linux UTC time side thus preserving the full precision of the NTFS
-	  time and only loosing up to 99 nano-seconds in the Linux UTC time.
-	- Move fs/ntfs/time.c to fs/ntfs/time.h and make the time functions
-	  static inline.
-	- Remove unused ntfs_dirty_inode().
-	- Cleanup super operations declaration in fs/ntfs/super.c.
-	- Wrap flush_dcache_mft_record_page() in #ifdef NTFS_RW.
-	- Add NInoTestSetFoo() and NInoTestClearFoo() macro magic to
-	  fs/ntfs/inode.h and use it to declare NInoTest{Set,Clear}Dirty.
-	- Move typedefs for ntfs_attr and test_t from fs/ntfs/inode.c to
-	  fs/ntfs/inode.h so they can be used elsewhere.
-	- Determine the mft mirror size as the number of mirrored mft records
-	  and store it in ntfs_volume->mftmirr_size (fs/ntfs/super.c).
-	- Load the mft mirror at mount time and compare the mft records stored
-	  in it to the ones in the mft.  Force a read-only mount if the two do
-	  not match (fs/ntfs/super.c).
-	- Fix type casting related warnings on 64-bit architectures.  Thanks
-	  to Meelis Roos for reporting them.
-	- Move %L to %ll as %L is floating point and %ll is integer which is
-	  what we want.
-	- Read the journal ($LogFile) and determine if the volume has been
-	  shutdown cleanly and force a read-only mount if not (fs/ntfs/super.c
-	  and fs/ntfs/logfile.c).  This is a little bit of a crude check in
-	  that we only look at the restart areas and not at the actual log
-	  records so that there will be a very small number of cases where we
-	  think that a volume is dirty when in fact it is clean.  This should
-	  only affect volumes that have not been shutdown cleanly and did not
-	  have any pending, non-check-pointed i/o.
-	- If the $LogFile indicates a clean shutdown and a read-write (re)mount
-	  is requested, empty $LogFile by overwriting it with 0xff bytes to
-	  ensure that Windows cannot cause data corruption by replaying a stale
-	  journal after Linux has written to the volume.
-
-2.1.7 - Enable NFS exporting of mounted NTFS volumes.
-
-	- Set i_generation in the VFS inode from the seq_no of the NTFS inode.
-	- Make ntfs_lookup() NFS export safe, i.e. use d_splice_alias(), etc.
-	- Implement ->get_dentry() in fs/ntfs/namei.c::ntfs_get_dentry() as the
-	  default doesn't allow inode number 0 which is a valid inode on NTFS
-	  and even if it did allow that it uses iget() instead of ntfs_iget()
-	  which makes it useless for us.
-	- Implement ->get_parent() in fs/ntfs/namei.c::ntfs_get_parent() as the
-	  default just returns -EACCES which is not very useful.
-	- Define export operations (->s_export_op) for NTFS (ntfs_export_ops)
-	  and set them up in the super block at mount time (super.c) this
-	  allows mounted NTFS volumes to be exported via NFS.
-	- Add missing return -EOPNOTSUPP; in
-	  fs/ntfs/aops.c::ntfs_commit_nonresident_write().
-	- Enforce no atime and no dir atime updates at mount/remount time as
-	  they are not implemented yet anyway.
-	- Move a few assignments in fs/ntfs/attrib.c::load_attribute_list() to
-	  after a NULL check.  Thanks to Dave Jones for pointing this out.
-
-2.1.6 - Fix minor bug in handling of compressed directories.
-
-	- Fix bug in handling of compressed directories.  A compressed
-	  directory is not really compressed so when we set the ->i_blocks
-	  field of a compressed directory inode we were setting it from the
-	  non-existing field ni->itype.compressed.size which gave random
-	  results...  For directories we now always use ni->allocated_size.
-
-2.1.5 - Fix minor bug in attribute list attribute handling.
-
-	- Fix bug in attribute list handling.  Actually it is not as much a bug
-	  as too much protection in that we were not allowing attribute lists
-	  which waste space on disk while Windows XP clearly allows it and in
-	  fact creates such attribute lists so our driver was failing.
-	- Update NTFS documentation ready for 2.6 kernel release.
-
-2.1.4 - Reduce compiler requirements.
-
-	- Remove all uses of unnamed structs and unions in the driver to make
-	  old and newer gcc versions happy. Makes it a bit uglier IMO but at
-	  least people will stop hassling me about it.
-
-2.1.3 - Important bug fixes in corner cases.
-
-	- super.c::parse_ntfs_boot_sector(): Correct the check for 64-bit
-	  clusters. (Philipp Thomas)
-	- attrib.c::load_attribute_list(): Fix bug when initialized_size is a
-	  multiple of the block_size but not the cluster size. (Szabolcs
-	  Szakacsits)
-
-2.1.2 - Important bug fixes aleviating the hangs in statfs.
-
-	- Fix buggy free cluster and free inode determination logic.
-
-2.1.1 - Minor updates.
-
-	- Add handling for initialized_size != data_size in compressed files.
-	- Reduce function local stack usage from 0x3d4 bytes to just noise in
-	  fs/ntfs/upcase.c. (Randy Dunlap)
-	- Remove compiler warnings for newer gcc.
-	- Pages are no longer kmapped by mm/filemap.c::generic_file_write()
-	  around calls to ->{prepare,commit}_write.  Adapt NTFS appropriately
-	  in fs/ntfs/aops.c::ntfs_prepare_nonresident_write() by using
-	  kmap_atomic(KM_USER0).
-
-2.1.0 - First steps towards write support: implement file overwrite.
-
-	- Add configuration option for developmental write support with an
-	  appropriately scary configuration help text.
-	- Initial implementation of fs/ntfs/aops.c::ntfs_writepage() and its
-	  helper fs/ntfs/aops.c::ntfs_write_block(). This enables mmap(2) based
-	  overwriting of existing files on ntfs. Note: Resident files are
-	  only written into memory, and not written out to disk at present, so
-	  avoid writing to files smaller than about 1kiB.
-	- Initial implementation of fs/ntfs/aops.c::ntfs_prepare_write(), its
-	  helper fs/ntfs/aops.c::ntfs_prepare_nonresident_write() and their
-	  counterparts, fs/ntfs/aops.c::ntfs_commit_write(), and
-	  fs/ntfs/aops.c::ntfs_commit_nonresident_write(), respectively. Also,
-	  add generic_file_write() to the ntfs file operations (fs/ntfs/file.c).
-	  This enables write(2) based overwriting of existing files on ntfs.
-	  Note: As with mmap(2) based overwriting, resident files are only
-	  written into memory, and not written out to disk at present, so avoid
-	  writing to files smaller than about 1kiB.
-	- Implement ->truncate (fs/ntfs/inode.c::ntfs_truncate()) and
-	  ->setattr() (fs/ntfs/inode.c::ntfs_setattr()) inode operations for
-	  files with the purpose of intercepting and aborting all i_size
-	  changes which we do not support yet. ntfs_truncate() actually only
-	  emits a warning message but AFAICS our interception of i_size changes
-	  elsewhere means ntfs_truncate() never gets called for i_size changes.
-	  It is only called from generic_file_write() when we fail in
-	  ntfs_prepare_{,nonresident_}write() in order to discard any
-	  instantiated buffers beyond i_size. Thus i_size is not actually
-	  changed so our warning message is enough. Unfortunately it is not
-	  possible to easily determine if i_size is being changed or not hence
-	  we just emit an appropriately worded error message.
-
-2.0.25 - Small bug fixes and cleanups.
-
-	- Unlock the page in an out of memory error code path in
-	  fs/ntfs/aops.c::ntfs_read_block().
-	- If fs/ntfs/aops.c::ntfs_read_page() is called on an uptodate page,
-	  just unlock the page and return. (This can happen due to ->writepage
-	  clearing PageUptodate() during write out of MstProtected()
-	  attributes.
-	- Remove leaked write code again.
-
-2.0.24 - Cleanups.
-
-	- Treat BUG_ON() as ASSERT() not VERIFY(), i.e. do not use side effects
-	  inside BUG_ON(). (Adam J. Richter)
-	- Split logical OR expressions inside BUG_ON() into individual BUG_ON()
-	  calls for improved debugging. (Adam J. Richter)
-	- Add errors flag to the ntfs volume state, accessed via
-	  NVol{,Set,Clear}Errors(vol).
-	- Do not allow read-write remounts of read-only volumes with errors.
-	- Clarify comment for ntfs file operation sendfile which was added by
-	  Christoph Hellwig a while ago (just using generic_file_sendfile())
-	  to say that ntfs ->sendfile is only used for the case where the
-	  source data is on the ntfs partition and the destination is
-	  somewhere else, i.e. nothing we need to concern ourselves with.
-	- Add generic_file_write() as our ntfs file write operation.
-
-2.0.23 - Major bug fixes (races, deadlocks, non-i386 architectures).
-
-	- Massive internal locking changes to mft record locking. Fixes lock
-	  recursion and replaces the mrec_lock read/write semaphore with a
-	  mutex. Also removes the now superfluous mft_count. This fixes several
-	  race conditions and deadlocks, especially in the future write code.
-	- Fix ntfs over loopback for compressed files by adding an
-	  optimization barrier. (gcc was screwing up otherwise ?)
-	- Miscellaneous cleanups all over the code and a fix or two in error
-	  handling code paths.
-	Thanks go to Christoph Hellwig for pointing out the following two:
-	- Remove now unused function fs/ntfs/malloc.h::vmalloc_nofs().
-	- Fix ntfs_free() for ia64 and parisc by checking for VMALLOC_END, too.
-
-2.0.22 - Cleanups, mainly to ntfs_readdir(), and use C99 initializers.
-
-	- Change fs/ntfs/dir.c::ntfs_reddir() to only read/write ->f_pos once
-	  at entry/exit respectively.
-	- Use C99 initializers for structures.
-	- Remove unused variable blocks from fs/ntfs/aops.c::ntfs_read_block().
-
-2.0.21 - Check for, and refuse to work with too large files/directories/volumes.
-
-	- Limit volume size at mount time to 2TiB on architectures where
-	  unsigned long is 32-bits (fs/ntfs/super.c::parse_ntfs_boot_sector()).
-	  This is the most we can do without overflowing the 32-bit limit of
-	  the block device size imposed on us by sb_bread() and sb_getblk()
-	  for the time being.
-	- Limit file/directory size at open() time to 16TiB on architectures
-	  where unsigned long is 32-bits (fs/ntfs/file.c::ntfs_file_open() and
-	  fs/ntfs/dir.c::ntfs_dir_open()). This is the most we can do without
-	  overflowing the page cache page index.
-
-2.0.20 - Support non-resident directory index bitmaps, fix page leak in readdir.
-
-	- Move the directory index bitmap to use an attribute inode instead of
-	  having special fields for it inside the ntfs inode structure. This
-	  means that the index bitmaps now use the page cache for i/o, too,
-	  and also as a side effect we get support for non-resident index
-	  bitmaps for free.
-	- Simplify/cleanup error handling in fs/ntfs/dir.c::ntfs_readdir() and
-	  fix a page leak that manifested itself in some cases.
-	- Add fs/ntfs/inode.c::ntfs_put_inode(), which we need to release the
-	  index bitmap inode on the final iput().
-
-2.0.19 - Fix race condition, improvements, and optimizations in i/o interface.
-
-	- Apply block optimization added to fs/ntfs/aops.c::ntfs_read_block()
-	  to fs/ntfs/compress.c::ntfs_file_read_compressed_block() as well.
-	- Drop the "file" from ntfs_file_read_compressed_block().
-	- Rename fs/ntfs/aops.c::ntfs_enb_buffer_read_async() to
-	  ntfs_end_buffer_async_read() (more like the fs/buffer.c counterpart).
-	- Update ntfs_end_buffer_async_read() with the improved logic from
-	  its updated counterpart fs/buffer.c::end_buffer_async_read(). Apply
-	  further logic improvements to better determine when we set PageError.
-	- Update submission of buffers in fs/ntfs/aops.c::ntfs_read_block() to
-	  check for the buffers being uptodate first in line with the updated
-	  fs/buffer.c::block_read_full_page(). This plugs a small race
-	  condition.
-
-2.0.18 - Fix race condition in reading of compressed files.
-
-	- There was a narrow window between checking a buffer head for being
-	  uptodate and locking it in ntfs_file_read_compressed_block(). We now
-	  lock the buffer and then check whether it is uptodate or not.
-
-2.0.17 - Cleanups and optimizations - shrinking the ToDo list.
-
-	- Modify fs/ntfs/inode.c::ntfs_read_locked_inode() to return an error
-	  code and update callers, i.e. ntfs_iget(), to pass that error code
-	  up instead of just using -EIO.
-	- Modifications to super.c to ensure that both mount and remount
-	  cannot set any write related options when the driver is compiled
-	  read-only.
-	- Optimize block resolution in fs/ntfs/aops.c::ntfs_read_block() to
-	  cache the current runlist element. This should improve performance
-	  when reading very large and/or very fragmented data.
-
-2.0.16 - Convert access to $MFT/$BITMAP to attribute inode API.
-
-	- Fix a stupid bug introduced in 2.0.15 where we were unmapping the
-	  wrong inode in fs/ntfs/inode.c::ntfs_attr_iget().
-	- Fix debugging check in fs/ntfs/aops.c::ntfs_read_block().
-	- Convert $MFT/$BITMAP access to attribute inode API and remove all
-	  remnants of the ugly mftbmp address space and operations hack. This
-	  means we finally have only one readpage function as well as only one
-	  async io completion handler. Yey! The mft bitmap is now just an
-	  attribute inode and is accessed from vol->mftbmp_ino just as if it
-	  were a normal file. Fake inodes rule. (-:
-
-2.0.15 - Fake inodes based attribute i/o via the pagecache, fixes and cleanups.
-
-	- Fix silly bug in fs/ntfs/super.c::parse_options() which was causing
-	  remounts to fail when the partition had an entry in /etc/fstab and
-	  the entry specified the nls= option.
-	- Apply same macro magic used in fs/ntfs/inode.h to fs/ntfs/volume.h to
-	  expand all the helper functions NVolFoo(), NVolSetFoo(), and
-	  NVolClearFoo().
-	- Move copyright statement from driver initialisation message to
-	  module description (fs/super.c). This makes the initialisation
-	  message fit on one line and fits in better with rest of kernel.
-	- Update fs/ntfs/attrib.c::map_run_list() to work on both real and
-	  attribute inodes, and both for files and directories.
-	- Implement fake attribute inodes allowing all attribute i/o to go via
-	  the page cache and to use all the normal vfs/mm functionality:
-	  - Add ntfs_attr_iget() and its helper ntfs_read_locked_attr_inode()
-	    to fs/ntfs/inode.c.
-	  - Add needed cleanup code to ntfs_clear_big_inode().
-	- Merge address space operations for files and directories (aops.c),
-	  now just have ntfs_aops:
-	  - Rename:
-		end_buffer_read_attr_async() ->	ntfs_end_buffer_read_async(),
-		ntfs_attr_read_block()	     ->	ntfs_read_block(),
-		ntfs_file_read_page()	     ->	ntfs_readpage().
-	  - Rewrite fs/ntfs/aops.c::ntfs_readpage() to work on both real and
-	    attribute inodes, and both for files and directories.
-	  - Remove obsolete fs/ntfs/aops.c::ntfs_mst_readpage().
-
-2.0.14 - Run list merging code cleanup, minor locking changes, typo fixes.
-
-	- Change fs/ntfs/super.c::ntfs_statfs() to not rely on BKL by moving
-	  the locking out of super.c::get_nr_free_mft_records() and taking and
-	  dropping the mftbmp_lock rw_semaphore in ntfs_statfs() itself.
-	- Bring attribute runlist merging code (fs/ntfs/attrib.c) in sync with
-	  current userspace ntfs library code. This means that if a merge
-	  fails the original runlists are always left unmodified instead of
-	  being silently corrupted.
-	- Misc typo fixes.
-
-2.0.13 - Use iget5_locked() in preparation for fake inodes and small cleanups.
-
-	- Remove nr_mft_bits and the now superfluous union with nr_mft_records
-	  from ntfs_volume structure.
-	- Remove nr_lcn_bits and the now superfluous union with nr_clusters
-	  from ntfs_volume structure.
-	- Use iget5_locked() and friends instead of conventional iget(). Wrap
-	  the call in fs/ntfs/inode.c::ntfs_iget() and update callers of iget()
-	  to use ntfs_iget(). Leave only one iget() call at mount time so we
-	  don't need an ntfs_iget_mount().
-	- Change fs/ntfs/inode.c::ntfs_new_extent_inode() to take mft_no as an
-	  additional argument.
-
-2.0.12 - Initial cleanup of address space operations following 2.0.11 changes.
-
-	- Merge fs/ntfs/aops.c::end_buffer_read_mst_async() and
-	  fs/ntfs/aops.c::end_buffer_read_file_async() into one function
-	  fs/ntfs/aops.c::end_buffer_read_attr_async() using NInoMstProtected()
-	  to determine whether to apply mst fixups or not.
-	- Above change allows merging fs/ntfs/aops.c::ntfs_file_read_block()
-	  and fs/ntfs/aops.c::ntfs_mst_readpage() into one function
-	  fs/ntfs/aops.c::ntfs_attr_read_block(). Also, create a tiny wrapper
-	  fs/ntfs/aops.c::ntfs_mst_readpage() to transform the parameters from
-	  the VFS readpage function prototype to the ntfs_attr_read_block()
-	  function prototype.
-
-2.0.11 - Initial preparations for fake inode based attribute i/o.
-
-	- Move definition of ntfs_inode_state_bits to fs/ntfs/inode.h and
-	  do some macro magic (adapted from include/linux/buffer_head.h) to
-	  expand all the helper functions NInoFoo(), NInoSetFoo(), and
-	  NInoClearFoo().
-	- Add new flag to ntfs_inode_state_bits: NI_Sparse.
-	- Add new fields to ntfs_inode structure to allow use of fake inodes
-	  for attribute i/o: type, name, name_len. Also add new state bits:
-	  NI_Attr, which, if set, indicates the inode is a fake inode, and
-	  NI_MstProtected, which, if set, indicates the attribute uses multi
-	  sector transfer protection, i.e. fixups need to be applied after
-	  reads and before/after writes.
-	- Rename fs/ntfs/inode.c::ntfs_{new,clear,destroy}_inode() to
-	  ntfs_{new,clear,destroy}_extent_inode() and update callers.
-	- Use ntfs_clear_extent_inode() in fs/ntfs/inode.c::__ntfs_clear_inode()
-	  instead of ntfs_destroy_extent_inode().
-	- Cleanup memory deallocations in {__,}ntfs_clear_{,big_}inode().
-	- Make all operations on ntfs inode state bits use the NIno* functions.
-	- Set up the new ntfs inode fields and state bits in
-	  fs/ntfs/inode.c::ntfs_read_inode() and add appropriate cleanup of
-	  allocated memory to __ntfs_clear_inode().
-	- Cleanup ntfs_inode structure a bit for better ordering of elements
-	  w.r.t. their size to allow better packing of the structure in memory.
-
-2.0.10 - There can only be 2^32 - 1 inodes on an NTFS volume.
-
-	- Add check at mount time to verify that the number of inodes on the
-	  volume does not exceed 2^32 - 1, which is the maximum allowed for
-	  NTFS according to Microsoft.
-	- Change mft_no member of ntfs_inode structure to be unsigned long.
-	  Update all users. This makes ntfs_inode->mft_no just a copy of struct
-	  inode->i_ino. But we can't just always use struct inode->i_ino and
-	  remove mft_no because extent inodes do not have an attached struct
-	  inode.
-
-2.0.9 - Decompression engine now uses a single buffer and other cleanups.
-
-	- Change decompression engine to use a single buffer protected by a
-	  spin lock instead of per-CPU buffers. (Rusty Russell)
-	- Do not update cb_pos when handling a partial final page during
-	  decompression of a sparse compression block, as the value is later
-	  reset without being read/used. (Rusty Russell)
-	- Switch to using the new KM_BIO_SRC_IRQ for atomic kmap()s. (Andrew
-	  Morton)
-	- Change buffer size in ntfs_readdir()/ntfs_filldir() to use
-	  NLS_MAX_CHARSET_SIZE which makes the buffers almost 1kiB each but
-	  it also makes everything safer so it is a good thing.
-	- Miscellaneous minor cleanups to comments.
-
-2.0.8 - Major updates for handling of case sensitivity and dcache aliasing.
-
-	Big thanks go to Al Viro and other inhabitants of #kernel for investing
-	their time to discuss the case sensitivity and dcache aliasing issues.
-
-	- Remove unused source file fs/ntfs/attraops.c.
-	- Remove show_inodes mount option(s), thus dropping support for
-	  displaying of short file names.
-	- Remove deprecated mount option posix.
-	- Restore show_sys_files mount option.
-	- Add new mount option case_sensitive, to determine if the driver
-	  treats file names as case sensitive or not. If case sensitive, create
-	  file names in the POSIX namespace. Otherwise create file names in the
-	  LONG/WIN32 namespace. Note, files remain accessible via their short
-	  file name, if it exists.
-	- Remove really dumb logic bug in boot sector recovery code.
-	- Fix dcache aliasing issues wrt short/long file names via changes
-	  to fs/ntfs/dir.c::ntfs_lookup_inode_by_name() and
-	  fs/ntfs/namei.c::ntfs_lookup():
-	  - Add additional argument to ntfs_lookup_inode_by_name() in which we
-	    return information about the matching file name if the case is not
-	    matching or the match is a short file name. See comments above the
-	    function definition for details.
-	  - Change ntfs_lookup() to only create dcache entries for the correctly
-	    cased file name and only for the WIN32 namespace counterpart of DOS
-	    namespace file names. This ensures we have only one dentry per
-	    directory and also removes all dcache aliasing issues between short
-	    and long file names once we add write support. See comments above
-	    function for details.
-	- Fix potential 1 byte overflow in fs/ntfs/unistr.c::ntfs_ucstonls().
-
-2.0.7 - Minor cleanups and updates for changes in core kernel code.
-
-	- Remove much of the NULL struct element initializers.
-	- Various updates to make compatible with recent kernels.
-	- Remove defines of MAX_BUF_PER_PAGE and include linux/buffer_head.h
-	  in fs/ntfs/ntfs.h instead.
-	- Remove no longer needed KERNEL_VERSION checks. We are now in the
-	  kernel proper so they are no longer needed.
-
-2.0.6 - Major bugfix to make compatible with other kernel changes.
-
-	- Initialize the mftbmp address space properly now that there are more
-	  fields in the struct address_space. This was leading to hangs and
-	  oopses on umount since 2.5.12 because of changes to other parts of
-	  the kernel. We probably want a kernel generic init_address_space()
-	  function...
-	- Drop BKL from ntfs_readdir() after consultation with Al Viro. The
-	  only caller of ->readdir() is vfs_readdir() which holds i_mutex
-	  during the call, and i_mutex is sufficient protection against changes
-	  in the directory inode (including ->i_size).
-	- Use generic_file_llseek() for directories (as opposed to
-	  default_llseek()) as this downs i_mutex instead of the BKL which is
-	  what we now need for exclusion against ->f_pos changes considering we
-	  no longer take the BKL in ntfs_readdir().
-
-2.0.5 - Major bugfix. Buffer overflow in extent inode handling.
-
-	- No need to set old blocksize in super.c::ntfs_fill_super() as the
-	  VFS does so via invocation of deactivate_super() calling
-	  fs->fill_super() calling block_kill_super() which does it.
-	- BKL moved from VFS into dir.c::ntfs_readdir(). (Linus Torvalds)
-	  -> Do we really need it? I don't think so as we have exclusion on
-	  the directory ntfs_inode rw_semaphore mrec_lock. We mmight have to
-	  move the ->f_pos accesses under the mrec_lock though. Check this...
-	- Fix really, really, really stupid buffer overflow in extent inode
-	  handling in mft.c::map_extent_mft_record().
-
-2.0.4 - Cleanups and updates for kernel 2.5.11.
-
-	- Add documentation on how to use the MD driver to be able to use NTFS
-	  stripe and volume sets in Linux and generally cleanup documentation
-	  a bit.
-	Remove all uses of kdev_t in favour of struct block_device *:
-	- Change compress.c::ntfs_file_read_compressed_block() to use
-	  sb_getblk() instead of getblk().
-	- Change super.c::ntfs_fill_super() to use bdev_hardsect_size() instead
-	  of get_hardsect_size().
-	- No need to get old blocksize in super.c::ntfs_fill_super() as
-	  fs/super.c::get_sb_bdev() already does this.
-	- Set bh->b_bdev instead of bh->b_dev throughout aops.c.
-
-2.0.3 - Small bug fixes, cleanups, and performance improvements.
-
-	- Remove some dead code from mft.c.
-	- Optimize readpage and read_block functions throughout aops.c so that
-	  only initialized blocks are read. Non-initialized ones have their
-	  buffer head mapped, zeroed, and set up to date, without scheduling
-	  any i/o. Thanks to Al Viro for advice on how to avoid the device i/o.
-	Thanks go to Andrew Morton for spotting the below:
-	- Fix buglet in allocate_compression_buffers() error code path.
-	- Call flush_dcache_page() after modifying page cache page contents in
-	  ntfs_file_readpage().
-	- Check for existence of page buffers throughout aops.c before calling
-	  create_empty_buffers(). This happens when an I/O error occurs and the
-	  read is retried. (It also happens once writing is implemented so that
-	  needed doing anyway but I had left it for later...)
-	- Don't BUG_ON() uptodate and/or mapped buffers throughout aops.c in
-	  readpage and read_block functions. Reasoning same as above (i.e. I/O
-	  error retries and future write code paths.)
-
-2.0.2 - Minor updates and cleanups.
-
-	- Cleanup: rename mst.c::__post_read_mst_fixup to post_write_mst_fixup
-	  and cleanup the code a bit, removing the unused size parameter.
-	- Change default fmask to 0177 and update documentation.
-	- Change attrib.c::get_attr_search_ctx() to return the search context
-	  directly instead of taking the address of a pointer. A return value
-	  of NULL means the allocation failed. Updated all callers
-	  appropriately.
-	- Update to 2.5.9 kernel (preserving backwards compatibility) by
-	  replacing all occurences of page->buffers with page_buffers(page).
-	- Fix minor bugs in runlist merging, also minor cleanup.
-	- Updates to bootsector layout and mft mirror contents descriptions.
-	- Small bug fix in error detection in unistr.c and some cleanups.
-	- Grow name buffer allocations in unistr.c in aligned mutlipled of 64
-	  bytes.
-
-2.0.1 - Minor updates.
-
-	- Make default umask correspond to documentation.
-	- Improve documentation.
-	- Set default mode to include execute bit. The {u,f,d}mask can be used
-	  to take it away if desired. This allows binaries to be executed from
-	  a mounted ntfs partition.
-
-2.0.0 - New version number. Remove TNG from the name. Now in the kernel.
-
-	- Add kill_super, just keeping up with the vfs changes in the kernel.
-	- Repeat some changes from tng-0.0.8 that somehow got lost on the way
-	  from the CVS import into BitKeeper.
-	- Begin to implement proper handling of allocated_size vs
-	  initialized_size vs data_size (i.e. i_size). Done are
-	  mft.c::ntfs_mft_readpage(), aops.c::end_buffer_read_index_async(),
-	  and attrib.c::load_attribute_list().
-	- Lock the runlist in attrib.c::load_attribute_list() while using it.
-	- Fix memory leak in ntfs_file_read_compressed_block() and generally
-	  clean up compress.c a little, removing some uncommented/unused debug
-	  code.
-	- Tidy up dir.c a little bit.
-	- Don't bother getting the runlist in inode.c::ntfs_read_inode().
-	- Merge mft.c::ntfs_mft_readpage() and aops.c::ntfs_index_readpage()
-	  creating aops.c::ntfs_mst_readpage(), improving the handling of
-	  holes and overflow in the process and implementing the correct
-	  equivalent of ntfs_file_get_block() in ntfs_mst_readpage() itself.
-	  I am aiming for correctness at the moment. Modularisation can come
-	  later.
-	- Rename aops.c::end_buffer_read_index_async() to
-	  end_buffer_read_mst_async() and optimize the overflow checking and
-	  handling.
-	- Use the host of the mftbmp address space mapping to hold the ntfs
-	  volume. This is needed so the async i/o completion handler can
-	  retrieve a pointer to the volume. Hopefully this will not cause
-	  problems elsewhere in the kernel... Otherwise will need to use a
-	  fake inode.
-	- Complete implementation of proper handling of allocated_size vs
-	  initialized_size vs data_size (i.e. i_size) in whole driver.
-	  Basically aops.c is now completely rewritten.
-	- Change NTFS driver name to just NTFS and set version number to 2.0.0
-	  to make a clear distinction from the old driver which is still on
-	  version 1.1.22.
-
-tng-0.0.8 - 08/03/2002 - Now using BitKeeper, http://linux-ntfs.bkbits.net/
-
-	- Replace bdevname(sb->s_dev) with sb->s_id.
-	- Remove now superfluous new-line characters in all callers of
-	  ntfs_debug().
-	- Apply kludge in ntfs_read_inode(), setting i_nlink to 1 for
-	  directories. Without this the "find" utility gets very upset which is
-	  fair enough as Linux/Unix do not support directory hard links.
-	- Further runlist merging work. (Richard Russon)
-	- Backwards compatibility for gcc-2.95. (Richard Russon)
-	- Update to kernel 2.5.5-pre1 and rediff the now tiny patch.
-	- Convert to new filesystem declaration using ->ntfs_get_sb() and
-	  replacing ntfs_read_super() with ntfs_fill_super().
-	- Set s_maxbytes to MAX_LFS_FILESIZE to avoid page cache page index
-	  overflow on 32-bit architectures.
-	- Cleanup upcase loading code to use ntfs_(un)map_page().
-	- Disable/reenable preemtion in critical sections of compession engine.
-	- Replace device size determination in ntfs_fill_super() with
-	  sb->s_bdev->bd_inode->i_size (in bytes) and remove now superfluous
-	  function super.c::get_nr_blocks().
-	- Implement a mount time option (show_inodes) allowing choice of which
-	  types of inode names readdir() returns and modify ntfs_filldir()
-	  accordingly. There are several parameters to show_inodes:
-		system:	system files
-		win32:	long file names (including POSIX file names) [DEFAULT]
-		long:	same as win32
-		dos:	short file names only (excluding POSIX file names)
-		short:	same as dos
-		posix:	same as both win32 and dos
-		all:	all file names
-	  Note that the options are additive, i.e. specifying:
-		-o show_inodes=system,show_inodes=win32,show_inodes=dos
-	  is the same as specifying:
-		-o show_inodes=all
-	  Note that the "posix" and "all" options will show all directory
-	  names, BUT the link count on each directory inode entry is set to 1,
-	  due to Linux not supporting directory hard links. This may well
-	  confuse some userspace applications, since the directory names will
-	  have the same inode numbers. Thus it is NOT advisable to use the
-	  "posix" or "all" options. We provide them only for completeness sake.
-	- Add copies of allocated_size, initialized_size, and compressed_size to
-	  the ntfs inode structure and set them up in
-	  inode.c::ntfs_read_inode(). These reflect the unnamed data attribute
-	  for files and the index allocation attribute for directories.
-	- Add copies of allocated_size and initialized_size to ntfs inode for
-	  $BITMAP attribute of large directories and set them up in
-	  inode.c::ntfs_read_inode().
-	- Add copies of allocated_size and initialized_size to ntfs volume for
-	  $BITMAP attribute of $MFT and set them up in
-	  super.c::load_system_files().
-	- Parse deprecated ntfs driver options (iocharset, show_sys_files,
-	  posix, and utf8) and tell user what the new options to use are. Note
-	  we still do support them but they will be removed with kernel 2.7.x.
-	- Change all occurences of integer long long printf formatting to hex
-	  as printk() will not support long long integer format if/when the
-	  div64 patch goes into the kernel.
-	- Make slab caches have stable names and change the names to what they
-	  were intended to be. These changes are required/made possible by the
-	  new slab cache name handling which removes the length limitation by
-	  requiring the caller of kmem_cache_create() to supply a stable name
-	  which is then referenced but not copied.
-	- Rename run_list structure to run_list_element and create a new
-	  run_list structure containing a pointer to a run_list_element
-	  structure and a read/write semaphore. Adapt all users of runlists
-	  to new scheme and take and release the lock as needed. This fixes a
-	  nasty race as the run_list changes even when inodes are locked for
-	  reading and even when the inode isn't locked at all, so we really
-	  needed the serialization. We use a semaphore rather than a spinlock
-	  as memory allocations can sleep and doing everything GFP_ATOMIC
-	  would be silly.
-	- Cleanup read_inode() removing all code checking for lowest_vcn != 0.
-	  This can never happen due to the nature of lookup_attr() and how we
-	  support attribute lists. If it did happen it would imply the inode
-	  being corrupt.
-	- Check for lowest_vcn != 0 in ntfs_read_inode() and mark the inode as
-	  bad if found.
-	- Update to 2.5.6-pre2 changes in struct address_space.
-	- Use parent_ino() when accessing d_parent inode number in dir.c.
-	- Import Sourceforge CVS repository into BitKeeper repository:
-		http://linux-ntfs.bkbits.net/ntfs-tng-2.5
-	- Update fs/Makefile, fs/Config.help, fs/Config.in, and
-	  Documentation/filesystems/ntfs.txt for NTFS TNG.
-	- Create kernel configuration option controlling whether debugging
-	  is enabled or not.
-	- Add the required export of end_buffer_io_sync() from the patches
-	  directory to the kernel code.
-	- Update inode.c::ntfs_show_options() with show_inodes mount option.
-	- Update errors mount option.
-
-tng-0.0.7 - 13/02/2002 - The driver is now feature complete for read-only!
-
-	- Cleanup mft.c and it's debug/error output in particular. Fix a minor
-	  bug in mapping of extent inodes. Update all the comments to fit all
-	  the recent code changes.
-	- Modify vcn_to_lcn() to cope with entirely unmapped runlists.
-	- Cleanups in compress.c, mostly comments and folding help.
-	- Implement attrib.c::map_run_list() as a generic helper.
-	- Make compress.c::ntfs_file_read_compressed_block() use map_run_list()
-	  thus making code shorter and enabling attribute list support.
-	- Cleanup incorrect use of [su]64 with %L printf format specifier in
-	  all source files. Type casts to [unsigned] long long added to correct
-	  the mismatches (important for architectures which have long long not
-	  being 64 bits).
-	- Merge async io completion handlers for directory indexes and $MFT
-	  data into one by setting the index_block_size{_bits} of the ntfs
-	  inode for $MFT to the mft_record_size{_bits} of the ntfs_volume.
-	- Cleanup aops.c, update comments.
-	- Make ntfs_file_get_block() use map_run_list() so all files now
-	  support attribute lists.
-	- Make ntfs_dir_readpage() almost verbatim copy of
-	  block_read_full_page() by using ntfs_file_get_block() with only real
-	  difference being the use of our own async io completion handler
-	  rather than the default one, thus reducing the amount of code and
-	  automatically enabling attribute list support for directory indices.
-	- Fix bug in load_attribute_list() - forgot to call brelse in error
-	  code path.
-	- Change parameters to find_attr() and lookup_attr(). We no longer
-	  pass in the upcase table and its length. These can be gotten from
-	  ctx->ntfs_ino->vol->upcase{_len}. Update all callers.
-	- Cleanups in attrib.c.
-	- Implement merging of runlists, attrib.c::merge_run_lists() and its
-	  helpers. (Richard Russon)
-	- Attribute lists part 2, attribute extents and multi part runlists:
-	  enable proper support for LCN_RL_NOT_MAPPED and automatic mapping of
-	  further runlist parts via attrib.c::map_run_list().
-	- Tiny endianness bug fix in decompress_mapping_pairs().
-
-tng-0.0.6 - Encrypted directories, bug fixes, cleanups, debugging enhancements.
-
-	- Enable encrypted directories. (Their index root is marked encrypted
-	  to indicate that new files in that directory should be created
-	  encrypted.)
-	- Fix bug in NInoBmpNonResident() macro. (Cut and paste error.)
-	- Enable $Extend system directory. Most (if not all) extended system
-	  files do not have unnamed data attributes so ntfs_read_inode() had to
-	  special case them but that is ok, as the special casing recovery
-	  happens inside an error code path so there is zero slow down in the
-	  normal fast path. The special casing is done by introducing a new
-	  function inode.c::ntfs_is_extended_system_file() which checks if any
-	  of the hard links in the inode point to $Extend as being their parent
-	  directory and if they do we assume this is an extended system file.
-	- Create a sysctl/proc interface to allow {dis,en}abling of debug output
-	  when compiled with -DDEBUG. Default is debug messages to be disabled.
-	  To enable them, one writes a non-zero value to /proc/sys/fs/ntfs-debug
-	  (if /proc is enabled) or uses sysctl(2) to effect the same (if sysctl
-	  interface is enabled). Inspired by old ntfs driver.
-	- Add debug_msgs insmod/kernel boot parameter to set whether debug
-	  messages are {dis,en}abled. This is useful to enable debug messages
-	  during ntfs initialization and is the only way to activate debugging
-	  when the sysctl interface is not enabled.
-	- Cleanup debug output in various places.
-	- Remove all dollar signs ($) from the source (except comments) to
-	  enable compilation on architectures whose gcc compiler does not
-	  support dollar signs in the names of variables/constants. Attribute
-	  types now start with AT_ instead of $ and $I30 is now just I30.
-	- Cleanup ntfs_lookup() and add consistency check of sequence numbers.
-	- Load complete runlist for $MFT/$BITMAP during mount and cleanup
-	  access functions. This means we now cope with $MFT/$BITMAP being
-	  spread accross several mft records.
-	- Disable modification of mft_zone_multiplier on remount. We can always
-	  reenable this later on if we really want to, but we will need to make
-	  sure we readjust the mft_zone size / layout accordingly.
-
-tng-0.0.5 - Modernize for 2.5.x and further in line-ing with Al Viro's comments.
-
-	- Use sb_set_blocksize() instead of set_blocksize() and verify the
-	  return value.
-	- Use sb_bread() instead of bread() throughout.
-	- Add index_vcn_size{_bits} to ntfs_inode structure to store the size
-	  of a directory index block vcn. Apply resulting simplifications in
-	  dir.c everywhere.
-	- Fix a small bug somewhere (but forgot what it was).
-	- Change ntfs_{debug,error,warning} to enable gcc to do type checking
-	  on the printf-format parameter list and fix bugs reported by gcc
-	  as a result. (Richard Russon)
-	- Move inode allocation strategy to Al's new stuff but maintain the
-	  divorce of ntfs_inode from struct inode. To achieve this we have two
-	  separate slab caches, one for big ntfs inodes containing a struct
-	  inode and pure ntfs inodes and at the same time fix some faulty
-	  error code paths in ntfs_read_inode().
-	- Show mount options in proc (inode.c::ntfs_show_options()).
-
-tng-0.0.4 - Big changes, getting in line with Al Viro's comments.
-
-	- Modified (un)map_mft_record functions to be common for read and write
-	  case. To specify which is which, added extra parameter at front of
-	  parameter list. Pass either READ or WRITE to this, each has the
-	  obvious meaning.
-	- General cleanups to allow for easier folding in vi.
-	- attrib.c::decompress_mapping_pairs() now accepts the old runlist
-	  argument, and invokes attrib.c::merge_run_lists() to merge the old
-	  and the new runlists.
-	- Removed attrib.c::find_first_attr().
-	- Implemented loading of attribute list and complete runlist for $MFT.
-	  This means we now cope with $MFT being spread across several mft
-	  records.
-	- Adapt to 2.5.2-pre9 and the changed create_empty_buffers() syntax.
-	- Adapt major/minor/kdev_t/[bk]devname stuff to new 2.5.x kernels.
-	- Make ntfs_volume be allocated via kmalloc() instead of using a slab
-	  cache. There are too little ntfs_volume structures at any one time
-	  to justify a private slab cache.
-	- Fix bogus kmap() use in async io completion. Now use kmap_atomic().
-	  Use KM_BIO_IRQ on advice from IRC/kernel...
-	- Use ntfs_map_page() in map_mft_record() and create ->readpage method
-	  for reading $MFT (ntfs_mft_readpage). In the process create dedicated
-	  address space operations (ntfs_mft_aops) for $MFT inode mapping. Also
-	  removed the now superfluous exports from the kernel core patch.
-	- Fix a bug where kfree() was used instead of ntfs_free().
-	- Change map_mft_record() to take ntfs_inode as argument instead of
-	  vfs inode. Dito for unmap_mft_record(). Adapt all callers.
-	- Add pointer to ntfs_volume to ntfs_inode.
-	- Add mft record number and sequence number to ntfs_inode. Stop using
-	  i_ino and i_generation for in-driver purposes.
-	- Implement attrib.c::merge_run_lists(). (Richard Russon)
-	- Remove use of proper inodes by extent inodes. Move i_ino and
-	  i_generation to ntfs_inode to do this. Apply simplifications that
-	  result and remove iget_no_wait(), etc.
-	- Pass ntfs_inode everywhere in the driver (used to be struct inode).
-	- Add reference counting in ntfs_inode for the ntfs inode itself and
-	  for the mapped mft record.
-	- Extend mft record mapping so we can (un)map extent mft records (new
-	  functions (un)map_extent_mft_record), and so mappings are reference
-	  counted and don't have to happen twice if already mapped - just ref
-	  count increases.
-	- Add -o iocharset as alias to -o nls for backwards compatibility.
-	- The latest core patch is now tiny. In fact just a single additional
-	  export is necessary over the base kernel.
-
-tng-0.0.3 - Cleanups, enhancements, bug fixes.
-
-	- Work on attrib.c::decompress_mapping_pairs() to detect base extents
-	  and setup the runlist appropriately using knowledge provided by the
-	  sizes in the base attribute record.
-	- Balance the get_/put_attr_search_ctx() calls so we don't leak memory
-	  any more.
-	- Introduce ntfs_malloc_nofs() and ntfs_free() to allocate/free a single
-	  page or use vmalloc depending on the amount of memory requested.
-	- Cleanup error output. The __FUNCTION__ "(): " is now added
-	  automatically. Introduced a new header file debug.h to support this
-	  and also moved ntfs_debug() function into it.
-	- Make reading of compressed files more intelligent and especially get
-	  rid of the vmalloc_nofs() from readpage(). This now uses per CPU
-	  buffers (allocated at first mount with cluster size <= 4kiB and
-	  deallocated on last umount with cluster size <= 4kiB), and
-	  asynchronous io for the compressed data using a list of buffer heads.
-	  Er, we use synchronous io as async io only works on whole pages
-	  covered by buffers and not on individual buffer heads...
-	- Bug fix for reading compressed files with sparse compression blocks.
-
-tng-0.0.2 - Now handles larger/fragmented/compressed volumes/files/dirs.
-
-	- Fixed handling of directories when cluster size exceeds index block
-	  size.
-	- Hide DOS only name space directory entries from readdir() but allow
-	  them in lookup(). This should fix the problem that Linux doesn't
-	  support directory hard links, while still allowing access to entries
-	  via their short file name. This also has the benefit of mimicking
-	  what Windows users are used to, so it is the ideal solution.
-	- Implemented sync_page everywhere so no more hangs in D state when
-	  waiting for a page.
-	- Stop using bforget() in favour of brelse().
-	- Stop locking buffers unnecessarily.
-	- Implemented compressed files (inode->mapping contains uncompressed
-	  data, raw compressed data is currently bread() into a vmalloc()ed
-	  memory buffer).
-	- Enable compressed directories. (Their index root is marked compressed
-	  to indicate that new files in that directory should be created
-	  compressed.)
-	- Use vsnprintf rather than vsprintf in the ntfs_error and ntfs_warning
-	  functions. (Thanks to Will Dyson for pointing this out.)
-	- Moved the ntfs_inode and ntfs_volume (the former ntfs_inode_info and
-	  ntfs_sb_info) out of the common inode and super_block structures and
-	  started using the generic_ip and generic_sbp pointers instead. This
-	  makes ntfs entirely private with respect to the kernel tree.
-	- Detect compiler version and abort with error message if gcc less than
-	  2.96 is used.
-	- Fix bug in name comparison function in unistr.c.
-	- Implement attribute lists part 1, the infrastructure: search contexts
-	  and operations, find_external_attr(), lookup_attr()) and make the
-	  code use the infrastructure.
-	- Fix stupid buffer overflow bug that became apparent on larger run
-	  list containing attributes.
-	- Fix bugs in readdir() that became apparent on larger directories.
-
-	The driver is now really useful and survives the test
-		find . -type f -exec md5sum "{}" \;
-	without any error messages on a over 1GiB sized partition with >16k
-	files on it, including compressed files and directories and many files
-	and directories with attribute lists.
-
-tng-0.0.1 - The first useful version.
-
-	- Added ntfs_lookup().
-	- Added default upcase generation and handling.
-	- Added compile options to be shown on module init.
-	- Many bug fixes that were "hidden" before.
-	- Update to latest kernel.
-	- Added ntfs_readdir().
-	- Added file operations for mmap(), read(), open() and llseek(). We just
-	  use the generic ones. The whole point of going through implementing
-	  readpage() methods and where possible get_block() call backs is that
-	  this allows us to make use of the generic high level methods provided
-	  by the kernel.
-
-	The driver is now actually useful! Yey. (-: It undoubtedly has got bugs
-	though and it doesn't implement accesssing compressed files yet. Also,
-	accessing files with attribute list attributes is not implemented yet
-	either. But for small or simple filesystems it should work and allow
-	you to list directories, use stat on directory entries and the file
-	system, open, read, mmap and llseek around in files. A big mile stone
-	has been reached!
-
-tng-0.0.0 - Initial version tag.
-
-	Initial driver implementation. The driver can mount and umount simple
-	NTFS filesystems (i.e. ones without attribute lists in the system
-	files). If the mount fails there might be problems in the error handling
-	code paths, so be warned. Otherwise it seems to be loading the system
-	files nicely and the mft record read mapping/unmapping seems to be
-	working nicely, too. Proof of inode metadata in the page cache and non-
-	resident file unnamed stream data in the page cache concepts is thus
-	complete.
diff --git a/fs/ntfs/super.c b/fs/ntfs/super.c
index 1cf39dfaee7a..0de1db6cddbf 100644
--- a/fs/ntfs/super.c
+++ b/fs/ntfs/super.c
@@ -31,6 +31,7 @@
 #include <linux/vfs.h>
 #include <linux/moduleparam.h>
 #include <linux/smp_lock.h>
+#include <linux/bitmap.h>
 
 #include "sysctl.h"
 #include "logfile.h"
@@ -2458,7 +2459,6 @@ static void ntfs_put_super(struct super_block *sb)
 static s64 get_nr_free_clusters(ntfs_volume *vol)
 {
 	s64 nr_free = vol->nr_clusters;
-	u32 *kaddr;
 	struct address_space *mapping = vol->lcnbmp_ino->i_mapping;
 	struct page *page;
 	pgoff_t index, max_index;
@@ -2477,7 +2477,8 @@ static s64 get_nr_free_clusters(ntfs_volume *vol)
 	ntfs_debug("Reading $Bitmap, max_index = 0x%lx, max_size = 0x%lx.",
 			max_index, PAGE_CACHE_SIZE / 4);
 	for (index = 0; index < max_index; index++) {
-		unsigned int i;
+		unsigned long *kaddr;
+
 		/*
 		 * Read the page from page cache, getting it from backing store
 		 * if necessary, and increment the use count.
@@ -2490,16 +2491,16 @@ static s64 get_nr_free_clusters(ntfs_volume *vol)
 			nr_free -= PAGE_CACHE_SIZE * 8;
 			continue;
 		}
-		kaddr = (u32*)kmap_atomic(page, KM_USER0);
+		kaddr = kmap_atomic(page, KM_USER0);
 		/*
-		 * For each 4 bytes, subtract the number of set bits. If this
+		 * Subtract the number of set bits. If this
 		 * is the last page and it is partial we don't really care as
 		 * it just means we do a little extra work but it won't affect
 		 * the result as all out of range bytes are set to zero by
 		 * ntfs_readpage().
 		 */
-	  	for (i = 0; i < PAGE_CACHE_SIZE / 4; i++)
-			nr_free -= (s64)hweight32(kaddr[i]);
+		nr_free -= bitmap_weight(kaddr,
+					PAGE_CACHE_SIZE * BITS_PER_BYTE);
 		kunmap_atomic(kaddr, KM_USER0);
 		page_cache_release(page);
 	}
@@ -2538,7 +2539,6 @@ static s64 get_nr_free_clusters(ntfs_volume *vol)
 static unsigned long __get_nr_free_mft_records(ntfs_volume *vol,
 		s64 nr_free, const pgoff_t max_index)
 {
-	u32 *kaddr;
 	struct address_space *mapping = vol->mftbmp_ino->i_mapping;
 	struct page *page;
 	pgoff_t index;
@@ -2548,7 +2548,8 @@ static unsigned long __get_nr_free_mft_records(ntfs_volume *vol,
 	ntfs_debug("Reading $MFT/$BITMAP, max_index = 0x%lx, max_size = "
 			"0x%lx.", max_index, PAGE_CACHE_SIZE / 4);
 	for (index = 0; index < max_index; index++) {
-		unsigned int i;
+		unsigned long *kaddr;
+
 		/*
 		 * Read the page from page cache, getting it from backing store
 		 * if necessary, and increment the use count.
@@ -2561,16 +2562,16 @@ static unsigned long __get_nr_free_mft_records(ntfs_volume *vol,
 			nr_free -= PAGE_CACHE_SIZE * 8;
 			continue;
 		}
-		kaddr = (u32*)kmap_atomic(page, KM_USER0);
+		kaddr = kmap_atomic(page, KM_USER0);
 		/*
-		 * For each 4 bytes, subtract the number of set bits. If this
+		 * Subtract the number of set bits. If this
 		 * is the last page and it is partial we don't really care as
 		 * it just means we do a little extra work but it won't affect
 		 * the result as all out of range bytes are set to zero by
 		 * ntfs_readpage().
 		 */
-	  	for (i = 0; i < PAGE_CACHE_SIZE / 4; i++)
-			nr_free -= (s64)hweight32(kaddr[i]);
+		nr_free -= bitmap_weight(kaddr,
+					PAGE_CACHE_SIZE * BITS_PER_BYTE);
 		kunmap_atomic(kaddr, KM_USER0);
 		page_cache_release(page);
 	}
diff --git a/fs/ocfs2/cluster/masklog.c b/fs/ocfs2/cluster/masklog.c
index b39da877b12f..3bb928a2bf7d 100644
--- a/fs/ocfs2/cluster/masklog.c
+++ b/fs/ocfs2/cluster/masklog.c
@@ -136,7 +136,7 @@ static ssize_t mlog_store(struct kobject *obj, struct attribute *attr,
 	return mlog_mask_store(mlog_attr->mask, buf, count);
 }
 
-static struct sysfs_ops mlog_attr_ops = {
+static const struct sysfs_ops mlog_attr_ops = {
 	.show  = mlog_show,
 	.store = mlog_store,
 };
diff --git a/fs/ocfs2/cluster/tcp.c b/fs/ocfs2/cluster/tcp.c
index d8d0c65ac03c..73e743eea2c8 100644
--- a/fs/ocfs2/cluster/tcp.c
+++ b/fs/ocfs2/cluster/tcp.c
@@ -72,9 +72,9 @@
 
 #include "tcp_internal.h"
 
-#define SC_NODEF_FMT "node %s (num %u) at %u.%u.%u.%u:%u"
+#define SC_NODEF_FMT "node %s (num %u) at %pI4:%u"
 #define SC_NODEF_ARGS(sc) sc->sc_node->nd_name, sc->sc_node->nd_num,	\
-			  NIPQUAD(sc->sc_node->nd_ipv4_address),	\
+			  &sc->sc_node->nd_ipv4_address,		\
 			  ntohs(sc->sc_node->nd_ipv4_port)
 
 /*
diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c
index 8298608d4165..50c4ee805da4 100644
--- a/fs/ocfs2/dlmglue.c
+++ b/fs/ocfs2/dlmglue.c
@@ -1881,7 +1881,7 @@ out:
  * ocfs2_file_lock() and ocfs2_file_unlock() map to a single pair of
  * flock() calls. The locking approach this requires is sufficiently
  * different from all other cluster lock types that we implement a
- * seperate path to the "low-level" dlm calls. In particular:
+ * separate path to the "low-level" dlm calls. In particular:
  *
  * - No optimization of lock levels is done - we take at exactly
  *   what's been requested.
diff --git a/fs/ocfs2/extent_map.c b/fs/ocfs2/extent_map.c
index 5328529e7fd2..c562a7581cf9 100644
--- a/fs/ocfs2/extent_map.c
+++ b/fs/ocfs2/extent_map.c
@@ -453,7 +453,7 @@ static int ocfs2_get_clusters_nocache(struct inode *inode,
 	if (i == -1) {
 		/*
 		 * Holes can be larger than the maximum size of an
-		 * extent, so we return their lengths in a seperate
+		 * extent, so we return their lengths in a separate
 		 * field.
 		 */
 		if (hole_len) {
diff --git a/fs/qnx4/inode.c b/fs/qnx4/inode.c
index ebf3440d28ca..277575ddc05c 100644
--- a/fs/qnx4/inode.c
+++ b/fs/qnx4/inode.c
@@ -201,7 +201,8 @@ static const char *qnx4_checkroot(struct super_block *sb)
 				rootdir = (struct qnx4_inode_entry *) (bh->b_data + i * QNX4_DIR_ENTRY_SIZE);
 				if (rootdir->di_fname != NULL) {
 					QNX4DEBUG((KERN_INFO "rootdir entry found : [%s]\n", rootdir->di_fname));
-					if (!strncmp(rootdir->di_fname, QNX4_BMNAME, sizeof QNX4_BMNAME)) {
+					if (!strcmp(rootdir->di_fname,
+						    QNX4_BMNAME)) {
 						found = 1;
 						qnx4_sb(sb)->BitMap = kmalloc( sizeof( struct qnx4_inode_entry ), GFP_KERNEL );
 						if (!qnx4_sb(sb)->BitMap) {
diff --git a/fs/reiserfs/bitmap.c b/fs/reiserfs/bitmap.c
index dc014f7def05..483442e66ed6 100644
--- a/fs/reiserfs/bitmap.c
+++ b/fs/reiserfs/bitmap.c
@@ -169,7 +169,7 @@ static int scan_bitmap_block(struct reiserfs_transaction_handle *th,
 			return 0;	// No free blocks in this bitmap
 		}
 
-		/* search for a first zero bit -- beggining of a window */
+		/* search for a first zero bit -- beginning of a window */
 		*beg = reiserfs_find_next_zero_le_bit
 		    ((unsigned long *)(bh->b_data), boundary, *beg);
 
diff --git a/fs/select.c b/fs/select.c
index 73715e90030f..500a669f7790 100644
--- a/fs/select.c
+++ b/fs/select.c
@@ -691,6 +691,23 @@ SYSCALL_DEFINE6(pselect6, int, n, fd_set __user *, inp, fd_set __user *, outp,
 }
 #endif /* HAVE_SET_RESTORE_SIGMASK */
 
+#ifdef __ARCH_WANT_SYS_OLD_SELECT
+struct sel_arg_struct {
+	unsigned long n;
+	fd_set __user *inp, *outp, *exp;
+	struct timeval __user *tvp;
+};
+
+SYSCALL_DEFINE1(old_select, struct sel_arg_struct __user *, arg)
+{
+	struct sel_arg_struct a;
+
+	if (copy_from_user(&a, arg, sizeof(a)))
+		return -EFAULT;
+	return sys_select(a.n, a.inp, a.outp, a.exp, a.tvp);
+}
+#endif
+
 struct poll_list {
 	struct poll_list *next;
 	int len;
diff --git a/fs/sysfs/bin.c b/fs/sysfs/bin.c
index a0a500af24a1..e9d293593e52 100644
--- a/fs/sysfs/bin.c
+++ b/fs/sysfs/bin.c
@@ -54,14 +54,14 @@ fill_read(struct dentry *dentry, char *buffer, loff_t off, size_t count)
 	int rc;
 
 	/* need attr_sd for attr, its parent for kobj */
-	if (!sysfs_get_active_two(attr_sd))
+	if (!sysfs_get_active(attr_sd))
 		return -ENODEV;
 
 	rc = -EIO;
 	if (attr->read)
 		rc = attr->read(kobj, attr, buffer, off, count);
 
-	sysfs_put_active_two(attr_sd);
+	sysfs_put_active(attr_sd);
 
 	return rc;
 }
@@ -125,14 +125,14 @@ flush_write(struct dentry *dentry, char *buffer, loff_t offset, size_t count)
 	int rc;
 
 	/* need attr_sd for attr, its parent for kobj */
-	if (!sysfs_get_active_two(attr_sd))
+	if (!sysfs_get_active(attr_sd))
 		return -ENODEV;
 
 	rc = -EIO;
 	if (attr->write)
 		rc = attr->write(kobj, attr, buffer, offset, count);
 
-	sysfs_put_active_two(attr_sd);
+	sysfs_put_active(attr_sd);
 
 	return rc;
 }
@@ -184,12 +184,12 @@ static void bin_vma_open(struct vm_area_struct *vma)
 	if (!bb->vm_ops || !bb->vm_ops->open)
 		return;
 
-	if (!sysfs_get_active_two(attr_sd))
+	if (!sysfs_get_active(attr_sd))
 		return;
 
 	bb->vm_ops->open(vma);
 
-	sysfs_put_active_two(attr_sd);
+	sysfs_put_active(attr_sd);
 }
 
 static void bin_vma_close(struct vm_area_struct *vma)
@@ -201,12 +201,12 @@ static void bin_vma_close(struct vm_area_struct *vma)
 	if (!bb->vm_ops || !bb->vm_ops->close)
 		return;
 
-	if (!sysfs_get_active_two(attr_sd))
+	if (!sysfs_get_active(attr_sd))
 		return;
 
 	bb->vm_ops->close(vma);
 
-	sysfs_put_active_two(attr_sd);
+	sysfs_put_active(attr_sd);
 }
 
 static int bin_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
@@ -219,12 +219,12 @@ static int bin_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 	if (!bb->vm_ops || !bb->vm_ops->fault)
 		return VM_FAULT_SIGBUS;
 
-	if (!sysfs_get_active_two(attr_sd))
+	if (!sysfs_get_active(attr_sd))
 		return VM_FAULT_SIGBUS;
 
 	ret = bb->vm_ops->fault(vma, vmf);
 
-	sysfs_put_active_two(attr_sd);
+	sysfs_put_active(attr_sd);
 	return ret;
 }
 
@@ -241,12 +241,12 @@ static int bin_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf)
 	if (!bb->vm_ops->page_mkwrite)
 		return 0;
 
-	if (!sysfs_get_active_two(attr_sd))
+	if (!sysfs_get_active(attr_sd))
 		return VM_FAULT_SIGBUS;
 
 	ret = bb->vm_ops->page_mkwrite(vma, vmf);
 
-	sysfs_put_active_two(attr_sd);
+	sysfs_put_active(attr_sd);
 	return ret;
 }
 
@@ -261,12 +261,12 @@ static int bin_access(struct vm_area_struct *vma, unsigned long addr,
 	if (!bb->vm_ops || !bb->vm_ops->access)
 		return -EINVAL;
 
-	if (!sysfs_get_active_two(attr_sd))
+	if (!sysfs_get_active(attr_sd))
 		return -EINVAL;
 
 	ret = bb->vm_ops->access(vma, addr, buf, len, write);
 
-	sysfs_put_active_two(attr_sd);
+	sysfs_put_active(attr_sd);
 	return ret;
 }
 
@@ -281,12 +281,12 @@ static int bin_set_policy(struct vm_area_struct *vma, struct mempolicy *new)
 	if (!bb->vm_ops || !bb->vm_ops->set_policy)
 		return 0;
 
-	if (!sysfs_get_active_two(attr_sd))
+	if (!sysfs_get_active(attr_sd))
 		return -EINVAL;
 
 	ret = bb->vm_ops->set_policy(vma, new);
 
-	sysfs_put_active_two(attr_sd);
+	sysfs_put_active(attr_sd);
 	return ret;
 }
 
@@ -301,12 +301,12 @@ static struct mempolicy *bin_get_policy(struct vm_area_struct *vma,
 	if (!bb->vm_ops || !bb->vm_ops->get_policy)
 		return vma->vm_policy;
 
-	if (!sysfs_get_active_two(attr_sd))
+	if (!sysfs_get_active(attr_sd))
 		return vma->vm_policy;
 
 	pol = bb->vm_ops->get_policy(vma, addr);
 
-	sysfs_put_active_two(attr_sd);
+	sysfs_put_active(attr_sd);
 	return pol;
 }
 
@@ -321,12 +321,12 @@ static int bin_migrate(struct vm_area_struct *vma, const nodemask_t *from,
 	if (!bb->vm_ops || !bb->vm_ops->migrate)
 		return 0;
 
-	if (!sysfs_get_active_two(attr_sd))
+	if (!sysfs_get_active(attr_sd))
 		return 0;
 
 	ret = bb->vm_ops->migrate(vma, from, to, flags);
 
-	sysfs_put_active_two(attr_sd);
+	sysfs_put_active(attr_sd);
 	return ret;
 }
 #endif
@@ -356,7 +356,7 @@ static int mmap(struct file *file, struct vm_area_struct *vma)
 
 	/* need attr_sd for attr, its parent for kobj */
 	rc = -ENODEV;
-	if (!sysfs_get_active_two(attr_sd))
+	if (!sysfs_get_active(attr_sd))
 		goto out_unlock;
 
 	rc = -EINVAL;
@@ -384,7 +384,7 @@ static int mmap(struct file *file, struct vm_area_struct *vma)
 	bb->vm_ops = vma->vm_ops;
 	vma->vm_ops = &bin_vm_ops;
 out_put:
-	sysfs_put_active_two(attr_sd);
+	sysfs_put_active(attr_sd);
 out_unlock:
 	mutex_unlock(&bb->mutex);
 
@@ -399,7 +399,7 @@ static int open(struct inode * inode, struct file * file)
 	int error;
 
 	/* binary file operations requires both @sd and its parent */
-	if (!sysfs_get_active_two(attr_sd))
+	if (!sysfs_get_active(attr_sd))
 		return -ENODEV;
 
 	error = -EACCES;
@@ -426,11 +426,11 @@ static int open(struct inode * inode, struct file * file)
 	mutex_unlock(&sysfs_bin_lock);
 
 	/* open succeeded, put active references */
-	sysfs_put_active_two(attr_sd);
+	sysfs_put_active(attr_sd);
 	return 0;
 
  err_out:
-	sysfs_put_active_two(attr_sd);
+	sysfs_put_active(attr_sd);
 	kfree(bb);
 	return error;
 }
diff --git a/fs/sysfs/dir.c b/fs/sysfs/dir.c
index 699f371b9f12..590717861c7a 100644
--- a/fs/sysfs/dir.c
+++ b/fs/sysfs/dir.c
@@ -93,7 +93,7 @@ static void sysfs_unlink_sibling(struct sysfs_dirent *sd)
  *	RETURNS:
  *	Pointer to @sd on success, NULL on failure.
  */
-static struct sysfs_dirent *sysfs_get_active(struct sysfs_dirent *sd)
+struct sysfs_dirent *sysfs_get_active(struct sysfs_dirent *sd)
 {
 	if (unlikely(!sd))
 		return NULL;
@@ -124,7 +124,7 @@ static struct sysfs_dirent *sysfs_get_active(struct sysfs_dirent *sd)
  *	Put an active reference to @sd.  This function is noop if @sd
  *	is NULL.
  */
-static void sysfs_put_active(struct sysfs_dirent *sd)
+void sysfs_put_active(struct sysfs_dirent *sd)
 {
 	struct completion *cmpl;
 	int v;
@@ -145,45 +145,6 @@ static void sysfs_put_active(struct sysfs_dirent *sd)
 }
 
 /**
- *	sysfs_get_active_two - get active references to sysfs_dirent and parent
- *	@sd: sysfs_dirent of interest
- *
- *	Get active reference to @sd and its parent.  Parent's active
- *	reference is grabbed first.  This function is noop if @sd is
- *	NULL.
- *
- *	RETURNS:
- *	Pointer to @sd on success, NULL on failure.
- */
-struct sysfs_dirent *sysfs_get_active_two(struct sysfs_dirent *sd)
-{
-	if (sd) {
-		if (sd->s_parent && unlikely(!sysfs_get_active(sd->s_parent)))
-			return NULL;
-		if (unlikely(!sysfs_get_active(sd))) {
-			sysfs_put_active(sd->s_parent);
-			return NULL;
-		}
-	}
-	return sd;
-}
-
-/**
- *	sysfs_put_active_two - put active references to sysfs_dirent and parent
- *	@sd: sysfs_dirent of interest
- *
- *	Put active references to @sd and its parent.  This function is
- *	noop if @sd is NULL.
- */
-void sysfs_put_active_two(struct sysfs_dirent *sd)
-{
-	if (sd) {
-		sysfs_put_active(sd);
-		sysfs_put_active(sd->s_parent);
-	}
-}
-
-/**
  *	sysfs_deactivate - deactivate sysfs_dirent
  *	@sd: sysfs_dirent to deactivate
  *
@@ -195,6 +156,10 @@ static void sysfs_deactivate(struct sysfs_dirent *sd)
 	int v;
 
 	BUG_ON(sd->s_sibling || !(sd->s_flags & SYSFS_FLAG_REMOVED));
+
+	if (!(sysfs_type(sd) & SYSFS_ACTIVE_REF))
+		return;
+
 	sd->s_sibling = (void *)&wait;
 
 	rwsem_acquire(&sd->dep_map, 0, 0, _RET_IP_);
@@ -354,7 +319,6 @@ struct sysfs_dirent *sysfs_new_dirent(const char *name, umode_t mode, int type)
 
 	atomic_set(&sd->s_count, 1);
 	atomic_set(&sd->s_active, 0);
-	sysfs_dirent_init_lockdep(sd);
 
 	sd->s_name = name;
 	sd->s_mode = mode;
@@ -681,7 +645,7 @@ static struct dentry * sysfs_lookup(struct inode *dir, struct dentry *dentry,
 	}
 
 	/* attach dentry and inode */
-	inode = sysfs_get_inode(sd);
+	inode = sysfs_get_inode(dir->i_sb, sd);
 	if (!inode) {
 		ret = ERR_PTR(-ENOMEM);
 		goto out_unlock;
@@ -837,11 +801,46 @@ static inline unsigned char dt_type(struct sysfs_dirent *sd)
 	return (sd->s_mode >> 12) & 15;
 }
 
+static int sysfs_dir_release(struct inode *inode, struct file *filp)
+{
+	sysfs_put(filp->private_data);
+	return 0;
+}
+
+static struct sysfs_dirent *sysfs_dir_pos(struct sysfs_dirent *parent_sd,
+	ino_t ino, struct sysfs_dirent *pos)
+{
+	if (pos) {
+		int valid = !(pos->s_flags & SYSFS_FLAG_REMOVED) &&
+			pos->s_parent == parent_sd &&
+			ino == pos->s_ino;
+		sysfs_put(pos);
+		if (valid)
+			return pos;
+	}
+	pos = NULL;
+	if ((ino > 1) && (ino < INT_MAX)) {
+		pos = parent_sd->s_dir.children;
+		while (pos && (ino > pos->s_ino))
+			pos = pos->s_sibling;
+	}
+	return pos;
+}
+
+static struct sysfs_dirent *sysfs_dir_next_pos(struct sysfs_dirent *parent_sd,
+	ino_t ino, struct sysfs_dirent *pos)
+{
+	pos = sysfs_dir_pos(parent_sd, ino, pos);
+	if (pos)
+		pos = pos->s_sibling;
+	return pos;
+}
+
 static int sysfs_readdir(struct file * filp, void * dirent, filldir_t filldir)
 {
 	struct dentry *dentry = filp->f_path.dentry;
 	struct sysfs_dirent * parent_sd = dentry->d_fsdata;
-	struct sysfs_dirent *pos;
+	struct sysfs_dirent *pos = filp->private_data;
 	ino_t ino;
 
 	if (filp->f_pos == 0) {
@@ -857,29 +856,31 @@ static int sysfs_readdir(struct file * filp, void * dirent, filldir_t filldir)
 		if (filldir(dirent, "..", 2, filp->f_pos, ino, DT_DIR) == 0)
 			filp->f_pos++;
 	}
-	if ((filp->f_pos > 1) && (filp->f_pos < INT_MAX)) {
-		mutex_lock(&sysfs_mutex);
-
-		/* Skip the dentries we have already reported */
-		pos = parent_sd->s_dir.children;
-		while (pos && (filp->f_pos > pos->s_ino))
-			pos = pos->s_sibling;
-
-		for ( ; pos; pos = pos->s_sibling) {
-			const char * name;
-			int len;
-
-			name = pos->s_name;
-			len = strlen(name);
-			filp->f_pos = ino = pos->s_ino;
+	mutex_lock(&sysfs_mutex);
+	for (pos = sysfs_dir_pos(parent_sd, filp->f_pos, pos);
+	     pos;
+	     pos = sysfs_dir_next_pos(parent_sd, filp->f_pos, pos)) {
+		const char * name;
+		unsigned int type;
+		int len, ret;
+
+		name = pos->s_name;
+		len = strlen(name);
+		ino = pos->s_ino;
+		type = dt_type(pos);
+		filp->f_pos = ino;
+		filp->private_data = sysfs_get(pos);
 
-			if (filldir(dirent, name, len, filp->f_pos, ino,
-					 dt_type(pos)) < 0)
-				break;
-		}
-		if (!pos)
-			filp->f_pos = INT_MAX;
 		mutex_unlock(&sysfs_mutex);
+		ret = filldir(dirent, name, len, filp->f_pos, ino, type);
+		mutex_lock(&sysfs_mutex);
+		if (ret < 0)
+			break;
+	}
+	mutex_unlock(&sysfs_mutex);
+	if ((filp->f_pos > 1) && !pos) { /* EOF */
+		filp->f_pos = INT_MAX;
+		filp->private_data = NULL;
 	}
 	return 0;
 }
@@ -888,5 +889,6 @@ static int sysfs_readdir(struct file * filp, void * dirent, filldir_t filldir)
 const struct file_operations sysfs_dir_operations = {
 	.read		= generic_read_dir,
 	.readdir	= sysfs_readdir,
+	.release	= sysfs_dir_release,
 	.llseek		= generic_file_llseek,
 };
diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c
index dc30d9e31683..e222b2582746 100644
--- a/fs/sysfs/file.c
+++ b/fs/sysfs/file.c
@@ -53,7 +53,7 @@ struct sysfs_buffer {
 	size_t			count;
 	loff_t			pos;
 	char			* page;
-	struct sysfs_ops	* ops;
+	const struct sysfs_ops	* ops;
 	struct mutex		mutex;
 	int			needs_read_fill;
 	int			event;
@@ -75,7 +75,7 @@ static int fill_read_buffer(struct dentry * dentry, struct sysfs_buffer * buffer
 {
 	struct sysfs_dirent *attr_sd = dentry->d_fsdata;
 	struct kobject *kobj = attr_sd->s_parent->s_dir.kobj;
-	struct sysfs_ops * ops = buffer->ops;
+	const struct sysfs_ops * ops = buffer->ops;
 	int ret = 0;
 	ssize_t count;
 
@@ -85,13 +85,13 @@ static int fill_read_buffer(struct dentry * dentry, struct sysfs_buffer * buffer
 		return -ENOMEM;
 
 	/* need attr_sd for attr and ops, its parent for kobj */
-	if (!sysfs_get_active_two(attr_sd))
+	if (!sysfs_get_active(attr_sd))
 		return -ENODEV;
 
 	buffer->event = atomic_read(&attr_sd->s_attr.open->event);
 	count = ops->show(kobj, attr_sd->s_attr.attr, buffer->page);
 
-	sysfs_put_active_two(attr_sd);
+	sysfs_put_active(attr_sd);
 
 	/*
 	 * The code works fine with PAGE_SIZE return but it's likely to
@@ -199,16 +199,16 @@ flush_write_buffer(struct dentry * dentry, struct sysfs_buffer * buffer, size_t
 {
 	struct sysfs_dirent *attr_sd = dentry->d_fsdata;
 	struct kobject *kobj = attr_sd->s_parent->s_dir.kobj;
-	struct sysfs_ops * ops = buffer->ops;
+	const struct sysfs_ops * ops = buffer->ops;
 	int rc;
 
 	/* need attr_sd for attr and ops, its parent for kobj */
-	if (!sysfs_get_active_two(attr_sd))
+	if (!sysfs_get_active(attr_sd))
 		return -ENODEV;
 
 	rc = ops->store(kobj, attr_sd->s_attr.attr, buffer->page, count);
 
-	sysfs_put_active_two(attr_sd);
+	sysfs_put_active(attr_sd);
 
 	return rc;
 }
@@ -335,7 +335,7 @@ static int sysfs_open_file(struct inode *inode, struct file *file)
 	struct sysfs_dirent *attr_sd = file->f_path.dentry->d_fsdata;
 	struct kobject *kobj = attr_sd->s_parent->s_dir.kobj;
 	struct sysfs_buffer *buffer;
-	struct sysfs_ops *ops;
+	const struct sysfs_ops *ops;
 	int error = -EACCES;
 	char *p;
 
@@ -344,7 +344,7 @@ static int sysfs_open_file(struct inode *inode, struct file *file)
 		memmove(last_sysfs_file, p, strlen(p) + 1);
 
 	/* need attr_sd for attr and ops, its parent for kobj */
-	if (!sysfs_get_active_two(attr_sd))
+	if (!sysfs_get_active(attr_sd))
 		return -ENODEV;
 
 	/* every kobject with an attribute needs a ktype assigned */
@@ -393,13 +393,13 @@ static int sysfs_open_file(struct inode *inode, struct file *file)
 		goto err_free;
 
 	/* open succeeded, put active references */
-	sysfs_put_active_two(attr_sd);
+	sysfs_put_active(attr_sd);
 	return 0;
 
  err_free:
 	kfree(buffer);
  err_out:
-	sysfs_put_active_two(attr_sd);
+	sysfs_put_active(attr_sd);
 	return error;
 }
 
@@ -437,12 +437,12 @@ static unsigned int sysfs_poll(struct file *filp, poll_table *wait)
 	struct sysfs_open_dirent *od = attr_sd->s_attr.open;
 
 	/* need parent for the kobj, grab both */
-	if (!sysfs_get_active_two(attr_sd))
+	if (!sysfs_get_active(attr_sd))
 		goto trigger;
 
 	poll_wait(filp, &od->poll, wait);
 
-	sysfs_put_active_two(attr_sd);
+	sysfs_put_active(attr_sd);
 
 	if (buffer->event != atomic_read(&od->event))
 		goto trigger;
@@ -509,6 +509,7 @@ int sysfs_add_file_mode(struct sysfs_dirent *dir_sd,
 	if (!sd)
 		return -ENOMEM;
 	sd->s_attr.attr = (void *)attr;
+	sysfs_dirent_init_lockdep(sd);
 
 	sysfs_addrm_start(&acxt, dir_sd);
 	rc = sysfs_add_one(&acxt, sd);
@@ -542,6 +543,18 @@ int sysfs_create_file(struct kobject * kobj, const struct attribute * attr)
 
 }
 
+int sysfs_create_files(struct kobject *kobj, const struct attribute **ptr)
+{
+	int err = 0;
+	int i;
+
+	for (i = 0; ptr[i] && !err; i++)
+		err = sysfs_create_file(kobj, ptr[i]);
+	if (err)
+		while (--i >= 0)
+			sysfs_remove_file(kobj, ptr[i]);
+	return err;
+}
 
 /**
  * sysfs_add_file_to_group - add an attribute file to a pre-existing group.
@@ -614,6 +627,12 @@ void sysfs_remove_file(struct kobject * kobj, const struct attribute * attr)
 	sysfs_hash_and_remove(kobj->sd, attr->name);
 }
 
+void sysfs_remove_files(struct kobject * kobj, const struct attribute **ptr)
+{
+	int i;
+	for (i = 0; ptr[i]; i++)
+		sysfs_remove_file(kobj, ptr[i]);
+}
 
 /**
  * sysfs_remove_file_from_group - remove an attribute file from a group.
@@ -732,3 +751,5 @@ EXPORT_SYMBOL_GPL(sysfs_schedule_callback);
 
 EXPORT_SYMBOL_GPL(sysfs_create_file);
 EXPORT_SYMBOL_GPL(sysfs_remove_file);
+EXPORT_SYMBOL_GPL(sysfs_remove_files);
+EXPORT_SYMBOL_GPL(sysfs_create_files);
diff --git a/fs/sysfs/inode.c b/fs/sysfs/inode.c
index 6a06a1d1ea7b..082daaecac1b 100644
--- a/fs/sysfs/inode.c
+++ b/fs/sysfs/inode.c
@@ -111,20 +111,20 @@ int sysfs_setattr(struct dentry *dentry, struct iattr *iattr)
 	if (!sd)
 		return -EINVAL;
 
+	mutex_lock(&sysfs_mutex);
 	error = inode_change_ok(inode, iattr);
 	if (error)
-		return error;
+		goto out;
 
 	iattr->ia_valid &= ~ATTR_SIZE; /* ignore size changes */
 
 	error = inode_setattr(inode, iattr);
 	if (error)
-		return error;
+		goto out;
 
-	mutex_lock(&sysfs_mutex);
 	error = sysfs_sd_setattr(sd, iattr);
+out:
 	mutex_unlock(&sysfs_mutex);
-
 	return error;
 }
 
@@ -283,6 +283,7 @@ static void sysfs_init_inode(struct sysfs_dirent *sd, struct inode *inode)
 
 /**
  *	sysfs_get_inode - get inode for sysfs_dirent
+ *	@sb: super block
  *	@sd: sysfs_dirent to allocate inode for
  *
  *	Get inode for @sd.  If such inode doesn't exist, a new inode
@@ -295,11 +296,11 @@ static void sysfs_init_inode(struct sysfs_dirent *sd, struct inode *inode)
  *	RETURNS:
  *	Pointer to allocated inode on success, NULL on failure.
  */
-struct inode * sysfs_get_inode(struct sysfs_dirent *sd)
+struct inode * sysfs_get_inode(struct super_block *sb, struct sysfs_dirent *sd)
 {
 	struct inode *inode;
 
-	inode = iget_locked(sysfs_sb, sd->s_ino);
+	inode = iget_locked(sb, sd->s_ino);
 	if (inode && (inode->i_state & I_NEW))
 		sysfs_init_inode(sd, inode);
 
diff --git a/fs/sysfs/mount.c b/fs/sysfs/mount.c
index 49749955ccaf..0cb10884a2fc 100644
--- a/fs/sysfs/mount.c
+++ b/fs/sysfs/mount.c
@@ -23,7 +23,6 @@
 
 
 static struct vfsmount *sysfs_mount;
-struct super_block * sysfs_sb = NULL;
 struct kmem_cache *sysfs_dir_cachep;
 
 static const struct super_operations sysfs_ops = {
@@ -50,11 +49,10 @@ static int sysfs_fill_super(struct super_block *sb, void *data, int silent)
 	sb->s_magic = SYSFS_MAGIC;
 	sb->s_op = &sysfs_ops;
 	sb->s_time_gran = 1;
-	sysfs_sb = sb;
 
 	/* get root inode, initialize and unlock it */
 	mutex_lock(&sysfs_mutex);
-	inode = sysfs_get_inode(&sysfs_root);
+	inode = sysfs_get_inode(sb, &sysfs_root);
 	mutex_unlock(&sysfs_mutex);
 	if (!inode) {
 		pr_debug("sysfs: could not get root inode\n");
diff --git a/fs/sysfs/symlink.c b/fs/sysfs/symlink.c
index c5eff49fa41b..1b9a3a1e8a17 100644
--- a/fs/sysfs/symlink.c
+++ b/fs/sysfs/symlink.c
@@ -123,6 +123,44 @@ void sysfs_remove_link(struct kobject * kobj, const char * name)
 	sysfs_hash_and_remove(parent_sd, name);
 }
 
+/**
+ *	sysfs_rename_link - rename symlink in object's directory.
+ *	@kobj:	object we're acting for.
+ *	@targ:	object we're pointing to.
+ *	@old:	previous name of the symlink.
+ *	@new:	new name of the symlink.
+ *
+ *	A helper function for the common rename symlink idiom.
+ */
+int sysfs_rename_link(struct kobject *kobj, struct kobject *targ,
+			const char *old, const char *new)
+{
+	struct sysfs_dirent *parent_sd, *sd = NULL;
+	int result;
+
+	if (!kobj)
+		parent_sd = &sysfs_root;
+	else
+		parent_sd = kobj->sd;
+
+	result = -ENOENT;
+	sd = sysfs_get_dirent(parent_sd, old);
+	if (!sd)
+		goto out;
+
+	result = -EINVAL;
+	if (sysfs_type(sd) != SYSFS_KOBJ_LINK)
+		goto out;
+	if (sd->s_symlink.target_sd->s_dir.kobj != targ)
+		goto out;
+
+	result = sysfs_rename(sd, parent_sd, new);
+
+out:
+	sysfs_put(sd);
+	return result;
+}
+
 static int sysfs_get_target_path(struct sysfs_dirent *parent_sd,
 				 struct sysfs_dirent *target_sd, char *path)
 {
diff --git a/fs/sysfs/sysfs.h b/fs/sysfs/sysfs.h
index cdd9377a6e06..30f5a44fb5d3 100644
--- a/fs/sysfs/sysfs.h
+++ b/fs/sysfs/sysfs.h
@@ -66,8 +66,8 @@ struct sysfs_dirent {
 	};
 
 	unsigned int		s_flags;
+	unsigned short		s_mode;
 	ino_t			s_ino;
-	umode_t			s_mode;
 	struct sysfs_inode_attrs *s_iattr;
 };
 
@@ -79,6 +79,7 @@ struct sysfs_dirent {
 #define SYSFS_KOBJ_BIN_ATTR		0x0004
 #define SYSFS_KOBJ_LINK			0x0008
 #define SYSFS_COPY_NAME			(SYSFS_DIR | SYSFS_KOBJ_LINK)
+#define SYSFS_ACTIVE_REF		(SYSFS_KOBJ_ATTR | SYSFS_KOBJ_BIN_ATTR)
 
 #define SYSFS_FLAG_MASK			~SYSFS_TYPE_MASK
 #define SYSFS_FLAG_REMOVED		0x0200
@@ -91,9 +92,12 @@ static inline unsigned int sysfs_type(struct sysfs_dirent *sd)
 #ifdef CONFIG_DEBUG_LOCK_ALLOC
 #define sysfs_dirent_init_lockdep(sd)				\
 do {								\
-	static struct lock_class_key __key;			\
+	struct attribute *attr = sd->s_attr.attr;		\
+	struct lock_class_key *key = attr->key;			\
+	if (!key)						\
+		key = &attr->skey;				\
 								\
-	lockdep_init_map(&sd->dep_map, "s_active", &__key, 0);	\
+	lockdep_init_map(&sd->dep_map, "s_active", key, 0);	\
 } while(0)
 #else
 #define sysfs_dirent_init_lockdep(sd) do {} while(0)
@@ -111,7 +115,6 @@ struct sysfs_addrm_cxt {
  * mount.c
  */
 extern struct sysfs_dirent sysfs_root;
-extern struct super_block *sysfs_sb;
 extern struct kmem_cache *sysfs_dir_cachep;
 
 /*
@@ -124,8 +127,8 @@ extern const struct file_operations sysfs_dir_operations;
 extern const struct inode_operations sysfs_dir_inode_operations;
 
 struct dentry *sysfs_get_dentry(struct sysfs_dirent *sd);
-struct sysfs_dirent *sysfs_get_active_two(struct sysfs_dirent *sd);
-void sysfs_put_active_two(struct sysfs_dirent *sd);
+struct sysfs_dirent *sysfs_get_active(struct sysfs_dirent *sd);
+void sysfs_put_active(struct sysfs_dirent *sd);
 void sysfs_addrm_start(struct sysfs_addrm_cxt *acxt,
 		       struct sysfs_dirent *parent_sd);
 int __sysfs_add_one(struct sysfs_addrm_cxt *acxt, struct sysfs_dirent *sd);
@@ -168,7 +171,7 @@ static inline void __sysfs_put(struct sysfs_dirent *sd)
 /*
  * inode.c
  */
-struct inode *sysfs_get_inode(struct sysfs_dirent *sd);
+struct inode *sysfs_get_inode(struct super_block *sb, struct sysfs_dirent *sd);
 void sysfs_delete_inode(struct inode *inode);
 int sysfs_sd_setattr(struct sysfs_dirent *sd, struct iattr *iattr);
 int sysfs_permission(struct inode *inode, int mask);
diff --git a/fs/udf/balloc.c b/fs/udf/balloc.c
index ccc3ad7242d4..19626e2491c4 100644
--- a/fs/udf/balloc.c
+++ b/fs/udf/balloc.c
@@ -31,55 +31,8 @@
 #define udf_clear_bit(nr, addr) ext2_clear_bit(nr, addr)
 #define udf_set_bit(nr, addr) ext2_set_bit(nr, addr)
 #define udf_test_bit(nr, addr) ext2_test_bit(nr, addr)
-#define udf_find_first_one_bit(addr, size) find_first_one_bit(addr, size)
 #define udf_find_next_one_bit(addr, size, offset) \
-		find_next_one_bit(addr, size, offset)
-
-#define leBPL_to_cpup(x) leNUM_to_cpup(BITS_PER_LONG, x)
-#define leNUM_to_cpup(x, y) xleNUM_to_cpup(x, y)
-#define xleNUM_to_cpup(x, y) (le ## x ## _to_cpup(y))
-#define uintBPL_t uint(BITS_PER_LONG)
-#define uint(x) xuint(x)
-#define xuint(x) __le ## x
-
-static inline int find_next_one_bit(void *addr, int size, int offset)
-{
-	uintBPL_t *p = ((uintBPL_t *) addr) + (offset / BITS_PER_LONG);
-	int result = offset & ~(BITS_PER_LONG - 1);
-	unsigned long tmp;
-
-	if (offset >= size)
-		return size;
-	size -= result;
-	offset &= (BITS_PER_LONG - 1);
-	if (offset) {
-		tmp = leBPL_to_cpup(p++);
-		tmp &= ~0UL << offset;
-		if (size < BITS_PER_LONG)
-			goto found_first;
-		if (tmp)
-			goto found_middle;
-		size -= BITS_PER_LONG;
-		result += BITS_PER_LONG;
-	}
-	while (size & ~(BITS_PER_LONG - 1)) {
-		tmp = leBPL_to_cpup(p++);
-		if (tmp)
-			goto found_middle;
-		result += BITS_PER_LONG;
-		size -= BITS_PER_LONG;
-	}
-	if (!size)
-		return result;
-	tmp = leBPL_to_cpup(p);
-found_first:
-	tmp &= ~0UL >> (BITS_PER_LONG - size);
-found_middle:
-	return result + ffz(~tmp);
-}
-
-#define find_first_one_bit(addr, size)\
-	find_next_one_bit((addr), (size), 0)
+		ext2_find_next_bit(addr, size, offset)
 
 static int read_block_bitmap(struct super_block *sb,
 			     struct udf_bitmap *bitmap, unsigned int block,
diff --git a/fs/udf/inode.c b/fs/udf/inode.c
index b57ab0402d89..bb863fe579ac 100644
--- a/fs/udf/inode.c
+++ b/fs/udf/inode.c
@@ -106,7 +106,7 @@ void udf_clear_inode(struct inode *inode)
 	if (iinfo->i_alloc_type != ICBTAG_FLAG_AD_IN_ICB &&
 	    inode->i_size != iinfo->i_lenExtents) {
 		printk(KERN_WARNING "UDF-fs (%s): Inode %lu (mode %o) has "
-			"inode size %llu different from extent lenght %llu. "
+			"inode size %llu different from extent length %llu. "
 			"Filesystem need not be standards compliant.\n",
 			inode->i_sb->s_id, inode->i_ino, inode->i_mode,
 			(unsigned long long)inode->i_size,
@@ -1408,20 +1408,19 @@ static int udf_update_inode(struct inode *inode, int do_sync)
 	unsigned char blocksize_bits = inode->i_sb->s_blocksize_bits;
 	struct udf_inode_info *iinfo = UDF_I(inode);
 
-	bh = udf_tread(inode->i_sb,
-			udf_get_lb_pblock(inode->i_sb,
-					  &iinfo->i_location, 0));
+	bh = udf_tgetblk(inode->i_sb,
+			udf_get_lb_pblock(inode->i_sb, &iinfo->i_location, 0));
 	if (!bh) {
-		udf_debug("bread failure\n");
-		return -EIO;
+		udf_debug("getblk failure\n");
+		return -ENOMEM;
 	}
 
-	memset(bh->b_data, 0x00, inode->i_sb->s_blocksize);
-
+	lock_buffer(bh);
+	memset(bh->b_data, 0, inode->i_sb->s_blocksize);
 	fe = (struct fileEntry *)bh->b_data;
 	efe = (struct extendedFileEntry *)bh->b_data;
 
-	if (fe->descTag.tagIdent == cpu_to_le16(TAG_IDENT_USE)) {
+	if (iinfo->i_use) {
 		struct unallocSpaceEntry *use =
 			(struct unallocSpaceEntry *)bh->b_data;
 
@@ -1429,20 +1428,18 @@ static int udf_update_inode(struct inode *inode, int do_sync)
 		memcpy(bh->b_data + sizeof(struct unallocSpaceEntry),
 		       iinfo->i_ext.i_data, inode->i_sb->s_blocksize -
 					sizeof(struct unallocSpaceEntry));
+		use->descTag.tagIdent = cpu_to_le16(TAG_IDENT_USE);
+		use->descTag.tagLocation =
+				cpu_to_le32(iinfo->i_location.logicalBlockNum);
 		crclen = sizeof(struct unallocSpaceEntry) +
 				iinfo->i_lenAlloc - sizeof(struct tag);
-		use->descTag.tagLocation = cpu_to_le32(
-						iinfo->i_location.
-							logicalBlockNum);
 		use->descTag.descCRCLength = cpu_to_le16(crclen);
 		use->descTag.descCRC = cpu_to_le16(crc_itu_t(0, (char *)use +
 							   sizeof(struct tag),
 							   crclen));
 		use->descTag.tagChecksum = udf_tag_checksum(&use->descTag);
 
-		mark_buffer_dirty(bh);
-		brelse(bh);
-		return err;
+		goto out;
 	}
 
 	if (UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_UID_FORGET))
@@ -1597,18 +1594,21 @@ static int udf_update_inode(struct inode *inode, int do_sync)
 	fe->descTag.tagSerialNum = cpu_to_le16(sbi->s_serial_number);
 	fe->descTag.tagLocation = cpu_to_le32(
 					iinfo->i_location.logicalBlockNum);
-	crclen += iinfo->i_lenEAttr + iinfo->i_lenAlloc -
-								sizeof(struct tag);
+	crclen += iinfo->i_lenEAttr + iinfo->i_lenAlloc - sizeof(struct tag);
 	fe->descTag.descCRCLength = cpu_to_le16(crclen);
 	fe->descTag.descCRC = cpu_to_le16(crc_itu_t(0, (char *)fe + sizeof(struct tag),
 						  crclen));
 	fe->descTag.tagChecksum = udf_tag_checksum(&fe->descTag);
 
+out:
+	set_buffer_uptodate(bh);
+	unlock_buffer(bh);
+
 	/* write the data blocks */
 	mark_buffer_dirty(bh);
 	if (do_sync) {
 		sync_dirty_buffer(bh);
-		if (buffer_req(bh) && !buffer_uptodate(bh)) {
+		if (buffer_write_io_error(bh)) {
 			printk(KERN_WARNING "IO error syncing udf inode "
 				"[%s:%08lx]\n", inode->i_sb->s_id,
 				inode->i_ino);
diff --git a/fs/ufs/super.c b/fs/ufs/super.c
index 66b63a751615..14743d935a93 100644
--- a/fs/ufs/super.c
+++ b/fs/ufs/super.c
@@ -1016,6 +1016,9 @@ magic_found:
 		case UFS_FSSTABLE:
 			UFSD("fs is stable\n");
 			break;
+		case UFS_FSLOG:
+			UFSD("fs is logging fs\n");
+			break;
 		case UFS_FSOSF1:
 			UFSD("fs is DEC OSF/1\n");
 			break;
diff --git a/fs/ufs/ufs_fs.h b/fs/ufs/ufs_fs.h
index 54bde1895a80..6943ec677c0b 100644
--- a/fs/ufs/ufs_fs.h
+++ b/fs/ufs/ufs_fs.h
@@ -138,6 +138,7 @@ typedef __u16 __bitwise __fs16;
 
 #define UFS_USEEFT  ((__u16)65535)
 
+/* fs_clean values */
 #define UFS_FSOK      0x7c269d38
 #define UFS_FSACTIVE  ((__s8)0x00)
 #define UFS_FSCLEAN   ((__s8)0x01)
@@ -145,6 +146,11 @@ typedef __u16 __bitwise __fs16;
 #define UFS_FSOSF1    ((__s8)0x03)	/* is this correct for DEC OSF/1? */
 #define UFS_FSBAD     ((__s8)0xff)
 
+/* Solaris-specific fs_clean values */
+#define UFS_FSSUSPEND ((__s8)0xfe)	/* temporarily suspended */
+#define UFS_FSLOG     ((__s8)0xfd)	/* logging fs */
+#define UFS_FSFIX     ((__s8)0xfc)	/* being repaired while mounted */
+
 /* From here to next blank line, s_flags for ufs_sb_info */
 /* directory entry encoding */
 #define UFS_DE_MASK		0x00000010	/* mask for the following */
@@ -227,11 +233,16 @@ typedef __u16 __bitwise __fs16;
  */
 #define ufs_cbtocylno(bno) \
 	((bno) * uspi->s_nspf / uspi->s_spc)
-#define ufs_cbtorpos(bno) \
+#define ufs_cbtorpos(bno)				      \
+	((UFS_SB(sb)->s_flags & UFS_CG_SUN) ?		      \
+	 (((((bno) * uspi->s_nspf % uspi->s_spc) %	      \
+	    uspi->s_nsect) *				      \
+	   uspi->s_nrpos) / uspi->s_nsect)		      \
+	 :						      \
 	((((bno) * uspi->s_nspf % uspi->s_spc / uspi->s_nsect \
 	* uspi->s_trackskew + (bno) * uspi->s_nspf % uspi->s_spc \
 	% uspi->s_nsect * uspi->s_interleave) % uspi->s_nsect \
-	* uspi->s_nrpos) / uspi->s_npsect)
+	  * uspi->s_nrpos) / uspi->s_npsect))
 
 /*
  * The following macros optimize certain frequently calculated
diff --git a/fs/xfs/linux-2.6/xfs_aops.c b/fs/xfs/linux-2.6/xfs_aops.c
index 9083357f9e44..99628508cb11 100644
--- a/fs/xfs/linux-2.6/xfs_aops.c
+++ b/fs/xfs/linux-2.6/xfs_aops.c
@@ -932,6 +932,9 @@ xfs_aops_discard_page(
 	if (!xfs_is_delayed_page(page, IOMAP_DELAY))
 		goto out_invalidate;
 
+	if (XFS_FORCED_SHUTDOWN(ip->i_mount))
+		goto out_invalidate;
+
 	xfs_fs_cmn_err(CE_ALERT, ip->i_mount,
 		"page discard on page %p, inode 0x%llx, offset %llu.",
 			page, ip->i_ino, offset);
@@ -964,8 +967,10 @@ xfs_aops_discard_page(
 
 		if (error) {
 			/* something screwed, just bail */
-			xfs_fs_cmn_err(CE_ALERT, ip->i_mount,
-			"page discard failed delalloc mapping lookup.");
+			if (!XFS_FORCED_SHUTDOWN(ip->i_mount)) {
+				xfs_fs_cmn_err(CE_ALERT, ip->i_mount,
+				"page discard failed delalloc mapping lookup.");
+			}
 			break;
 		}
 		if (!nimaps) {
@@ -991,8 +996,10 @@ xfs_aops_discard_page(
 		ASSERT(!flist.xbf_count && !flist.xbf_first);
 		if (error) {
 			/* something screwed, just bail */
-			xfs_fs_cmn_err(CE_ALERT, ip->i_mount,
+			if (!XFS_FORCED_SHUTDOWN(ip->i_mount)) {
+				xfs_fs_cmn_err(CE_ALERT, ip->i_mount,
 			"page discard unable to remove delalloc mapping.");
+			}
 			break;
 		}
 next_buffer:
diff --git a/fs/xfs/linux-2.6/xfs_buf.c b/fs/xfs/linux-2.6/xfs_buf.c
index 6f76ba85f193..bd111b7e1daa 100644
--- a/fs/xfs/linux-2.6/xfs_buf.c
+++ b/fs/xfs/linux-2.6/xfs_buf.c
@@ -168,75 +168,6 @@ test_page_region(
 }
 
 /*
- *	Mapping of multi-page buffers into contiguous virtual space
- */
-
-typedef struct a_list {
-	void		*vm_addr;
-	struct a_list	*next;
-} a_list_t;
-
-static a_list_t		*as_free_head;
-static int		as_list_len;
-static DEFINE_SPINLOCK(as_lock);
-
-/*
- *	Try to batch vunmaps because they are costly.
- */
-STATIC void
-free_address(
-	void		*addr)
-{
-	a_list_t	*aentry;
-
-#ifdef CONFIG_XEN
-	/*
-	 * Xen needs to be able to make sure it can get an exclusive
-	 * RO mapping of pages it wants to turn into a pagetable.  If
-	 * a newly allocated page is also still being vmap()ed by xfs,
-	 * it will cause pagetable construction to fail.  This is a
-	 * quick workaround to always eagerly unmap pages so that Xen
-	 * is happy.
-	 */
-	vunmap(addr);
-	return;
-#endif
-
-	aentry = kmalloc(sizeof(a_list_t), GFP_NOWAIT);
-	if (likely(aentry)) {
-		spin_lock(&as_lock);
-		aentry->next = as_free_head;
-		aentry->vm_addr = addr;
-		as_free_head = aentry;
-		as_list_len++;
-		spin_unlock(&as_lock);
-	} else {
-		vunmap(addr);
-	}
-}
-
-STATIC void
-purge_addresses(void)
-{
-	a_list_t	*aentry, *old;
-
-	if (as_free_head == NULL)
-		return;
-
-	spin_lock(&as_lock);
-	aentry = as_free_head;
-	as_free_head = NULL;
-	as_list_len = 0;
-	spin_unlock(&as_lock);
-
-	while ((old = aentry) != NULL) {
-		vunmap(aentry->vm_addr);
-		aentry = aentry->next;
-		kfree(old);
-	}
-}
-
-/*
  *	Internal xfs_buf_t object manipulation
  */
 
@@ -337,7 +268,8 @@ xfs_buf_free(
 		uint		i;
 
 		if (xfs_buf_is_vmapped(bp))
-			free_address(bp->b_addr - bp->b_offset);
+			vm_unmap_ram(bp->b_addr - bp->b_offset,
+					bp->b_page_count);
 
 		for (i = 0; i < bp->b_page_count; i++) {
 			struct page	*page = bp->b_pages[i];
@@ -457,10 +389,8 @@ _xfs_buf_map_pages(
 		bp->b_addr = page_address(bp->b_pages[0]) + bp->b_offset;
 		bp->b_flags |= XBF_MAPPED;
 	} else if (flags & XBF_MAPPED) {
-		if (as_list_len > 64)
-			purge_addresses();
-		bp->b_addr = vmap(bp->b_pages, bp->b_page_count,
-					VM_MAP, PAGE_KERNEL);
+		bp->b_addr = vm_map_ram(bp->b_pages, bp->b_page_count,
+					-1, PAGE_KERNEL);
 		if (unlikely(bp->b_addr == NULL))
 			return -ENOMEM;
 		bp->b_addr += bp->b_offset;
@@ -1955,9 +1885,6 @@ xfsbufd(
 			xfs_buf_iostrategy(bp);
 			count++;
 		}
-
-		if (as_list_len > 0)
-			purge_addresses();
 		if (count)
 			blk_run_address_space(target->bt_mapping);
 
diff --git a/include/acpi/processor.h b/include/acpi/processor.h
index 1172c27adadf..86825ddbe14e 100644
--- a/include/acpi/processor.h
+++ b/include/acpi/processor.h
@@ -320,8 +320,16 @@ static inline int acpi_processor_get_bios_limit(int cpu, unsigned int *limit)
 
 #endif				/* CONFIG_CPU_FREQ */
 
-/* in processor_pdc.c */
+/* in processor_core.c */
 void acpi_processor_set_pdc(acpi_handle handle);
+#ifdef CONFIG_SMP
+int acpi_get_cpuid(acpi_handle, int type, u32 acpi_id);
+#else
+static inline int acpi_get_cpuid(acpi_handle handle, int type, u32 acpi_id)
+{
+	return -1;
+}
+#endif
 
 /* in processor_throttling.c */
 int acpi_processor_tstate_has_changed(struct acpi_processor *pr);
diff --git a/include/asm-generic/pci-dma-compat.h b/include/asm-generic/pci-dma-compat.h
index 37b3706226e7..1437b7da09b2 100644
--- a/include/asm-generic/pci-dma-compat.h
+++ b/include/asm-generic/pci-dma-compat.h
@@ -6,9 +6,6 @@
 
 #include <linux/dma-mapping.h>
 
-/* note pci_set_dma_mask isn't here, since it's a public function
- * exported from drivers/pci, use dma_supported instead */
-
 static inline int
 pci_dma_supported(struct pci_dev *hwdev, u64 mask)
 {
@@ -104,4 +101,16 @@ pci_dma_mapping_error(struct pci_dev *pdev, dma_addr_t dma_addr)
 	return dma_mapping_error(&pdev->dev, dma_addr);
 }
 
+#ifdef CONFIG_PCI
+static inline int pci_set_dma_mask(struct pci_dev *dev, u64 mask)
+{
+	return dma_set_mask(&dev->dev, mask);
+}
+
+static inline int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
+{
+	return dma_set_coherent_mask(&dev->dev, mask);
+}
+#endif
+
 #endif
diff --git a/include/linux/acct.h b/include/linux/acct.h
index 882dc7248766..3e4737fa6cce 100644
--- a/include/linux/acct.h
+++ b/include/linux/acct.h
@@ -121,16 +121,15 @@ struct vfsmount;
 struct super_block;
 struct pacct_struct;
 struct pid_namespace;
+extern int acct_parm[]; /* for sysctl */
 extern void acct_auto_close_mnt(struct vfsmount *m);
 extern void acct_auto_close(struct super_block *sb);
-extern void acct_init_pacct(struct pacct_struct *pacct);
 extern void acct_collect(long exitcode, int group_dead);
 extern void acct_process(void);
 extern void acct_exit_ns(struct pid_namespace *);
 #else
 #define acct_auto_close_mnt(x)	do { } while (0)
 #define acct_auto_close(x)	do { } while (0)
-#define acct_init_pacct(x)	do { } while (0)
 #define acct_collect(x,y)	do { } while (0)
 #define acct_process()		do { } while (0)
 #define acct_exit_ns(ns)	do { } while (0)
diff --git a/include/linux/amba/clcd.h b/include/linux/amba/clcd.h
index 29c0448265cf..ca16c3801a1e 100644
--- a/include/linux/amba/clcd.h
+++ b/include/linux/amba/clcd.h
@@ -21,22 +21,21 @@
 #define CLCD_UBAS 		0x00000010
 #define CLCD_LBAS 		0x00000014
 
-#if !defined(CONFIG_ARCH_VERSATILE) && !defined(CONFIG_ARCH_REALVIEW)
-#define CLCD_IENB 		0x00000018
-#define CLCD_CNTL 		0x0000001c
-#else
-/*
- * Someone rearranged these two registers on the Versatile
- * platform...
- */
-#define CLCD_IENB 		0x0000001c
-#define CLCD_CNTL 		0x00000018
-#endif
-
-#define CLCD_STAT 		0x00000020
-#define CLCD_INTR 		0x00000024
-#define CLCD_UCUR 		0x00000028
-#define CLCD_LCUR 		0x0000002C
+#define CLCD_PL110_IENB		0x00000018
+#define CLCD_PL110_CNTL		0x0000001c
+#define CLCD_PL110_STAT		0x00000020
+#define CLCD_PL110_INTR 	0x00000024
+#define CLCD_PL110_UCUR		0x00000028
+#define CLCD_PL110_LCUR		0x0000002C
+
+#define CLCD_PL111_CNTL		0x00000018
+#define CLCD_PL111_IENB		0x0000001c
+#define CLCD_PL111_RIS		0x00000020
+#define CLCD_PL111_MIS		0x00000024
+#define CLCD_PL111_ICR		0x00000028
+#define CLCD_PL111_UCUR		0x0000002c
+#define CLCD_PL111_LCUR		0x00000030
+
 #define CLCD_PALL 		0x00000200
 #define CLCD_PALETTE		0x00000200
 
@@ -147,6 +146,8 @@ struct clcd_fb {
 	struct clcd_board	*board;
 	void			*board_data;
 	void __iomem		*regs;
+	u16			off_ienb;
+	u16			off_cntl;
 	u32			clcd_cntl;
 	u32			cmap[16];
 };
diff --git a/include/linux/backlight.h b/include/linux/backlight.h
index 8c4f884db6b4..4a3d52e545e1 100644
--- a/include/linux/backlight.h
+++ b/include/linux/backlight.h
@@ -36,18 +36,18 @@ struct backlight_device;
 struct fb_info;
 
 struct backlight_ops {
-	const unsigned int options;
+	unsigned int options;
 
 #define BL_CORE_SUSPENDRESUME	(1 << 0)
 
 	/* Notify the backlight driver some property has changed */
-	int (* const update_status)(struct backlight_device *);
+	int (*update_status)(struct backlight_device *);
 	/* Return the current backlight brightness (accounting for power,
 	   fb_blank etc.) */
-	int (* const get_brightness)(struct backlight_device *);
+	int (*get_brightness)(struct backlight_device *);
 	/* Check if given framebuffer device is the one bound to this backlight;
 	   return 0 if not, !=0 if it is. If NULL, backlight always matches the fb. */
-	int (* const check_fb)(struct fb_info *);
+	int (*check_fb)(struct backlight_device *, struct fb_info *);
 };
 
 /* This structure defines all the properties of a backlight */
@@ -103,7 +103,8 @@ static inline void backlight_update_status(struct backlight_device *bd)
 }
 
 extern struct backlight_device *backlight_device_register(const char *name,
-	struct device *dev, void *devdata, const struct backlight_ops *ops);
+	struct device *dev, void *devdata, const struct backlight_ops *ops,
+	const struct backlight_properties *props);
 extern void backlight_device_unregister(struct backlight_device *bd);
 extern void backlight_force_update(struct backlight_device *bd,
 				   enum backlight_update_reason reason);
diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h
index c9bbcb2a75ae..b8ad1ea99586 100644
--- a/include/linux/cgroup.h
+++ b/include/linux/cgroup.h
@@ -37,16 +37,24 @@ extern void cgroup_post_fork(struct task_struct *p);
 extern void cgroup_exit(struct task_struct *p, int run_callbacks);
 extern int cgroupstats_build(struct cgroupstats *stats,
 				struct dentry *dentry);
+extern int cgroup_load_subsys(struct cgroup_subsys *ss);
+extern void cgroup_unload_subsys(struct cgroup_subsys *ss);
 
 extern const struct file_operations proc_cgroup_operations;
 
-/* Define the enumeration of all cgroup subsystems */
+/* Define the enumeration of all builtin cgroup subsystems */
 #define SUBSYS(_x) _x ## _subsys_id,
 enum cgroup_subsys_id {
 #include <linux/cgroup_subsys.h>
-	CGROUP_SUBSYS_COUNT
+	CGROUP_BUILTIN_SUBSYS_COUNT
 };
 #undef SUBSYS
+/*
+ * This define indicates the maximum number of subsystems that can be loaded
+ * at once. We limit to this many since cgroupfs_root has subsys_bits to keep
+ * track of all of them.
+ */
+#define CGROUP_SUBSYS_COUNT (BITS_PER_BYTE*sizeof(unsigned long))
 
 /* Per-subsystem/per-cgroup state maintained by the system. */
 struct cgroup_subsys_state {
@@ -76,6 +84,12 @@ enum {
 	CSS_REMOVED, /* This CSS is dead */
 };
 
+/* Caller must verify that the css is not for root cgroup */
+static inline void __css_get(struct cgroup_subsys_state *css, int count)
+{
+	atomic_add(count, &css->refcnt);
+}
+
 /*
  * Call css_get() to hold a reference on the css; it can be used
  * for a reference obtained via:
@@ -87,7 +101,7 @@ static inline void css_get(struct cgroup_subsys_state *css)
 {
 	/* We don't need to reference count the root state */
 	if (!test_bit(CSS_ROOT, &css->flags))
-		atomic_inc(&css->refcnt);
+		__css_get(css, 1);
 }
 
 static inline bool css_is_removed(struct cgroup_subsys_state *css)
@@ -118,11 +132,11 @@ static inline bool css_tryget(struct cgroup_subsys_state *css)
  * css_get() or css_tryget()
  */
 
-extern void __css_put(struct cgroup_subsys_state *css);
+extern void __css_put(struct cgroup_subsys_state *css, int count);
 static inline void css_put(struct cgroup_subsys_state *css)
 {
 	if (!test_bit(CSS_ROOT, &css->flags))
-		__css_put(css);
+		__css_put(css, 1);
 }
 
 /* bits in struct cgroup flags field */
@@ -221,6 +235,10 @@ struct cgroup {
 
 	/* For RCU-protected deletion */
 	struct rcu_head rcu_head;
+
+	/* List of events which userspace want to recieve */
+	struct list_head event_list;
+	spinlock_t event_list_lock;
 };
 
 /*
@@ -258,7 +276,8 @@ struct css_set {
 	/*
 	 * Set of subsystem states, one for each subsystem. This array
 	 * is immutable after creation apart from the init_css_set
-	 * during subsystem registration (at boot time).
+	 * during subsystem registration (at boot time) and modular subsystem
+	 * loading/unloading.
 	 */
 	struct cgroup_subsys_state *subsys[CGROUP_SUBSYS_COUNT];
 
@@ -363,6 +382,23 @@ struct cftype {
 	int (*trigger)(struct cgroup *cgrp, unsigned int event);
 
 	int (*release)(struct inode *inode, struct file *file);
+
+	/*
+	 * register_event() callback will be used to add new userspace
+	 * waiter for changes related to the cftype. Implement it if
+	 * you want to provide this functionality. Use eventfd_signal()
+	 * on eventfd to send notification to userspace.
+	 */
+	int (*register_event)(struct cgroup *cgrp, struct cftype *cft,
+			struct eventfd_ctx *eventfd, const char *args);
+	/*
+	 * unregister_event() callback will be called when userspace
+	 * closes the eventfd or on cgroup removing.
+	 * This callback must be implemented, if you want provide
+	 * notification functionality.
+	 */
+	int (*unregister_event)(struct cgroup *cgrp, struct cftype *cft,
+			struct eventfd_ctx *eventfd);
 };
 
 struct cgroup_scanner {
@@ -428,6 +464,8 @@ struct cgroup_subsys {
 	void (*destroy)(struct cgroup_subsys *ss, struct cgroup *cgrp);
 	int (*can_attach)(struct cgroup_subsys *ss, struct cgroup *cgrp,
 			  struct task_struct *tsk, bool threadgroup);
+	void (*cancel_attach)(struct cgroup_subsys *ss, struct cgroup *cgrp,
+			  struct task_struct *tsk, bool threadgroup);
 	void (*attach)(struct cgroup_subsys *ss, struct cgroup *cgrp,
 			struct cgroup *old_cgrp, struct task_struct *tsk,
 			bool threadgroup);
@@ -472,6 +510,9 @@ struct cgroup_subsys {
 	/* used when use_id == true */
 	struct idr idr;
 	spinlock_t id_lock;
+
+	/* should be defined only by modular subsystems */
+	struct module *module;
 };
 
 #define SUBSYS(_x) extern struct cgroup_subsys _x ## _subsys;
diff --git a/include/linux/compat.h b/include/linux/compat.h
index ef68119a4fd2..717c691ecd8e 100644
--- a/include/linux/compat.h
+++ b/include/linux/compat.h
@@ -23,6 +23,7 @@
 typedef __compat_uid32_t	compat_uid_t;
 typedef __compat_gid32_t	compat_gid_t;
 
+struct compat_sel_arg_struct;
 struct rusage;
 
 struct compat_itimerspec { 
@@ -249,6 +250,8 @@ asmlinkage long compat_sys_select(int n, compat_ulong_t __user *inp,
 		compat_ulong_t __user *outp, compat_ulong_t __user *exp,
 		struct compat_timeval __user *tvp);
 
+asmlinkage long compat_sys_old_select(struct compat_sel_arg_struct __user *arg);
+
 asmlinkage long compat_sys_wait4(compat_pid_t pid,
 				 compat_uint_t __user *stat_addr, int options,
 				 struct compat_rusage __user *ru);
diff --git a/include/linux/coredump.h b/include/linux/coredump.h
index b3c91d7cede4..8ba66a9d9022 100644
--- a/include/linux/coredump.h
+++ b/include/linux/coredump.h
@@ -16,6 +16,8 @@ static inline int dump_write(struct file *file, const void *addr, int nr)
 
 static inline int dump_seek(struct file *file, loff_t off)
 {
+	int ret = 1;
+
 	if (file->f_op->llseek && file->f_op->llseek != no_llseek) {
 		if (file->f_op->llseek(file, off, SEEK_CUR) < 0)
 			return 0;
@@ -29,13 +31,15 @@ static inline int dump_seek(struct file *file, loff_t off)
 
 			if (n > PAGE_SIZE)
 				n = PAGE_SIZE;
-			if (!dump_write(file, buf, n))
-				return 0;
+			if (!dump_write(file, buf, n)) {
+				ret = 0;
+				break;
+			}
 			off -= n;
 		}
 		free_page((unsigned long)buf);
 	}
-	return 1;
+	return ret;
 }
 
 #endif /* _LINUX_COREDUMP_H */
diff --git a/include/linux/cred.h b/include/linux/cred.h
index 4db09f89b637..52507c3e1387 100644
--- a/include/linux/cred.h
+++ b/include/linux/cred.h
@@ -280,7 +280,7 @@ static inline void put_cred(const struct cred *_cred)
  * task or by holding tasklist_lock to prevent it from being unlinked.
  */
 #define __task_cred(task) \
-	((const struct cred *)(rcu_dereference_check((task)->real_cred, rcu_read_lock_held() || lockdep_is_held(&tasklist_lock))))
+	((const struct cred *)(rcu_dereference_check((task)->real_cred, rcu_read_lock_held() || lockdep_tasklist_lock_is_held())))
 
 /**
  * get_task_cred - Get another task's objective credentials
diff --git a/include/linux/decompress/mm.h b/include/linux/decompress/mm.h
index 5032b9a31ae7..ad5ec1d0475e 100644
--- a/include/linux/decompress/mm.h
+++ b/include/linux/decompress/mm.h
@@ -14,11 +14,21 @@
 
 /* Code active when included from pre-boot environment: */
 
+/*
+ * Some architectures want to ensure there is no local data in their
+ * pre-boot environment, so that data can arbitarily relocated (via
+ * GOT references).  This is achieved by defining STATIC_RW_DATA to
+ * be null.
+ */
+#ifndef STATIC_RW_DATA
+#define STATIC_RW_DATA static
+#endif
+
 /* A trivial malloc implementation, adapted from
  *  malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
  */
-static unsigned long malloc_ptr;
-static int malloc_count;
+STATIC_RW_DATA unsigned long malloc_ptr;
+STATIC_RW_DATA int malloc_count;
 
 static void *malloc(int size)
 {
diff --git a/include/linux/device.h b/include/linux/device.h
index b30527db3ac0..182192892d45 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -106,7 +106,7 @@ extern int bus_unregister_notifier(struct bus_type *bus,
 
 /* All 4 notifers below get called with the target struct device *
  * as an argument. Note that those functions are likely to be called
- * with the device semaphore held in the core, so be careful.
+ * with the device lock held in the core, so be careful.
  */
 #define BUS_NOTIFY_ADD_DEVICE		0x00000001 /* device added */
 #define BUS_NOTIFY_DEL_DEVICE		0x00000002 /* device removed */
@@ -251,8 +251,10 @@ extern struct device *class_find_device(struct class *class,
 
 struct class_attribute {
 	struct attribute attr;
-	ssize_t (*show)(struct class *class, char *buf);
-	ssize_t (*store)(struct class *class, const char *buf, size_t count);
+	ssize_t (*show)(struct class *class, struct class_attribute *attr,
+			char *buf);
+	ssize_t (*store)(struct class *class, struct class_attribute *attr,
+			const char *buf, size_t count);
 };
 
 #define CLASS_ATTR(_name, _mode, _show, _store)			\
@@ -263,6 +265,23 @@ extern int __must_check class_create_file(struct class *class,
 extern void class_remove_file(struct class *class,
 			      const struct class_attribute *attr);
 
+/* Simple class attribute that is just a static string */
+
+struct class_attribute_string {
+	struct class_attribute attr;
+	char *str;
+};
+
+/* Currently read-only only */
+#define _CLASS_ATTR_STRING(_name, _mode, _str) \
+	{ __ATTR(_name, _mode, show_class_attr_string, NULL), _str }
+#define CLASS_ATTR_STRING(_name, _mode, _str) \
+	struct class_attribute_string class_attr_##_name = \
+		_CLASS_ATTR_STRING(_name, _mode, _str)
+
+extern ssize_t show_class_attr_string(struct class *class, struct class_attribute *attr,
+                        char *buf);
+
 struct class_interface {
 	struct list_head	node;
 	struct class		*class;
@@ -489,6 +508,21 @@ static inline bool device_async_suspend_enabled(struct device *dev)
 	return !!dev->power.async_suspend;
 }
 
+static inline void device_lock(struct device *dev)
+{
+	down(&dev->sem);
+}
+
+static inline int device_trylock(struct device *dev)
+{
+	return down_trylock(&dev->sem);
+}
+
+static inline void device_unlock(struct device *dev)
+{
+	up(&dev->sem);
+}
+
 void driver_init(void);
 
 /*
diff --git a/include/linux/dm9000.h b/include/linux/dm9000.h
index c30879cf93bc..96e87693d933 100644
--- a/include/linux/dm9000.h
+++ b/include/linux/dm9000.h
@@ -23,7 +23,7 @@
 #define DM9000_PLATF_NO_EEPROM	(0x0010)
 #define DM9000_PLATF_SIMPLE_PHY (0x0020)  /* Use NSR to find LinkStatus */
 
-/* platfrom data for platfrom device structure's platfrom_data field */
+/* platform data for platform device structure's platform_data field */
 
 struct dm9000_plat_data {
 	unsigned int	flags;
diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h
index 91b761846061..ca32ed78b057 100644
--- a/include/linux/dma-mapping.h
+++ b/include/linux/dma-mapping.h
@@ -127,6 +127,14 @@ static inline u64 dma_get_mask(struct device *dev)
 	return DMA_BIT_MASK(32);
 }
 
+static inline int dma_set_coherent_mask(struct device *dev, u64 mask)
+{
+	if (!dma_supported(dev, mask))
+		return -EIO;
+	dev->coherent_dma_mask = mask;
+	return 0;
+}
+
 extern u64 dma_get_required_mask(struct device *dev);
 
 static inline unsigned int dma_get_max_seg_size(struct device *dev)
@@ -232,4 +240,20 @@ struct dma_attrs;
 
 #endif /* CONFIG_HAVE_DMA_ATTRS */
 
+#ifdef CONFIG_NEED_DMA_MAP_STATE
+#define DEFINE_DMA_UNMAP_ADDR(ADDR_NAME)        dma_addr_t ADDR_NAME
+#define DEFINE_DMA_UNMAP_LEN(LEN_NAME)          __u32 LEN_NAME
+#define dma_unmap_addr(PTR, ADDR_NAME)           ((PTR)->ADDR_NAME)
+#define dma_unmap_addr_set(PTR, ADDR_NAME, VAL)  (((PTR)->ADDR_NAME) = (VAL))
+#define dma_unmap_len(PTR, LEN_NAME)             ((PTR)->LEN_NAME)
+#define dma_unmap_len_set(PTR, LEN_NAME, VAL)    (((PTR)->LEN_NAME) = (VAL))
+#else
+#define DEFINE_DMA_UNMAP_ADDR(ADDR_NAME)
+#define DEFINE_DMA_UNMAP_LEN(LEN_NAME)
+#define dma_unmap_addr(PTR, ADDR_NAME)           (0)
+#define dma_unmap_addr_set(PTR, ADDR_NAME, VAL)  do { } while (0)
+#define dma_unmap_len(PTR, LEN_NAME)             (0)
+#define dma_unmap_len_set(PTR, LEN_NAME, VAL)    do { } while (0)
+#endif
+
 #endif
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index cca1c3de140d..b33f316bb92e 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -61,6 +61,13 @@ struct ethtool_drvinfo {
 				/* For PCI devices, use pci_name(pci_dev). */
 	char	reserved1[32];
 	char	reserved2[12];
+				/*
+				 * Some struct members below are filled in
+				 * using ops->get_sset_count().  Obtaining
+				 * this info from ethtool_drvinfo is now
+				 * deprecated; Use ETHTOOL_GSSET_INFO
+				 * instead.
+				 */
 	__u32	n_priv_flags;	/* number of flags valid in ETHTOOL_GPFLAGS */
 	__u32	n_stats;	/* number of u64's from ETHTOOL_GSTATS */
 	__u32	testinfo_len;
@@ -253,6 +260,17 @@ struct ethtool_gstrings {
 	__u8	data[0];
 };
 
+struct ethtool_sset_info {
+	__u32	cmd;		/* ETHTOOL_GSSET_INFO */
+	__u32	reserved;
+	__u64	sset_mask;	/* input: each bit selects an sset to query */
+				/* output: each bit a returned sset */
+	__u32	data[0];	/* ETH_SS_xxx count, in order, based on bits
+				   in sset_mask.  One bit implies one
+				   __u32, two bits implies two
+				   __u32's, etc. */
+};
+
 enum ethtool_test_flags {
 	ETH_TEST_FL_OFFLINE	= (1 << 0),	/* online / offline */
 	ETH_TEST_FL_FAILED	= (1 << 1),	/* test passed / failed */
@@ -606,9 +624,9 @@ struct ethtool_ops {
 #define	ETHTOOL_SRXCLSRLINS	0x00000032 /* Insert RX classification rule */
 #define	ETHTOOL_FLASHDEV	0x00000033 /* Flash firmware to device */
 #define	ETHTOOL_RESET		0x00000034 /* Reset hardware */
-
-#define ETHTOOL_SRXNTUPLE	0x00000035 /* Add an n-tuple filter to device */
-#define ETHTOOL_GRXNTUPLE	0x00000036 /* Get n-tuple filters from device */
+#define	ETHTOOL_SRXNTUPLE	0x00000035 /* Add an n-tuple filter to device */
+#define	ETHTOOL_GRXNTUPLE	0x00000036 /* Get n-tuple filters from device */
+#define	ETHTOOL_GSSET_INFO	0x00000037 /* Get string set info */
 
 /* compatibility with older code */
 #define SPARC_ETH_GSET		ETHTOOL_GSET
diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h
index 6b7c444ab8f6..c0f4b364c711 100644
--- a/include/linux/ftrace_event.h
+++ b/include/linux/ftrace_event.h
@@ -131,12 +131,12 @@ struct ftrace_event_call {
 	void			*mod;
 	void			*data;
 
-	int			profile_count;
-	int			(*profile_enable)(struct ftrace_event_call *);
-	void			(*profile_disable)(struct ftrace_event_call *);
+	int			perf_refcount;
+	int			(*perf_event_enable)(struct ftrace_event_call *);
+	void			(*perf_event_disable)(struct ftrace_event_call *);
 };
 
-#define FTRACE_MAX_PROFILE_SIZE	2048
+#define PERF_MAX_TRACE_SIZE	2048
 
 #define MAX_FILTER_PRED		32
 #define MAX_FILTER_STR_VAL	256	/* Should handle KSYM_SYMBOL_LEN */
@@ -187,22 +187,25 @@ do {									\
 
 #ifdef CONFIG_PERF_EVENTS
 struct perf_event;
-extern int ftrace_profile_enable(int event_id);
-extern void ftrace_profile_disable(int event_id);
+
+DECLARE_PER_CPU(struct pt_regs, perf_trace_regs);
+
+extern int perf_trace_enable(int event_id);
+extern void perf_trace_disable(int event_id);
 extern int ftrace_profile_set_filter(struct perf_event *event, int event_id,
 				     char *filter_str);
 extern void ftrace_profile_free_filter(struct perf_event *event);
 extern void *
-ftrace_perf_buf_prepare(int size, unsigned short type, int *rctxp,
+perf_trace_buf_prepare(int size, unsigned short type, int *rctxp,
 			 unsigned long *irq_flags);
 
 static inline void
-ftrace_perf_buf_submit(void *raw_data, int size, int rctx, u64 addr,
-		       u64 count, unsigned long irq_flags)
+perf_trace_buf_submit(void *raw_data, int size, int rctx, u64 addr,
+		       u64 count, unsigned long irq_flags, struct pt_regs *regs)
 {
 	struct trace_entry *entry = raw_data;
 
-	perf_tp_event(entry->type, addr, count, raw_data, size);
+	perf_tp_event(entry->type, addr, count, raw_data, size, regs);
 	perf_swevent_put_recursion_context(rctx);
 	local_irq_restore(irq_flags);
 }
diff --git a/include/linux/hil.h b/include/linux/hil.h
index 13352d7d0caf..523785a9de70 100644
--- a/include/linux/hil.h
+++ b/include/linux/hil.h
@@ -168,14 +168,14 @@ enum hil_command {
 	HIL_CMD_PR6	= 0x45,	/* Prompt6 */
 	HIL_CMD_PR7	= 0x46,	/* Prompt7 */
 	HIL_CMD_PRM	= 0x47,	/* Prompt (General Purpose) */
-	HIL_CMD_AK1	= 0x48,	/* Acknowlege1 */  
-	HIL_CMD_AK2	= 0x49,	/* Acknowlege2 */
-	HIL_CMD_AK3	= 0x4a,	/* Acknowlege3 */
-	HIL_CMD_AK4	= 0x4b,	/* Acknowlege4 */
-	HIL_CMD_AK5	= 0x4c,	/* Acknowlege5 */
-	HIL_CMD_AK6	= 0x4d,	/* Acknowlege6 */
-	HIL_CMD_AK7	= 0x4e,	/* Acknowlege7 */
-	HIL_CMD_ACK	= 0x4f,	/* Acknowlege (General Purpose) */
+	HIL_CMD_AK1	= 0x48,	/* Acknowledge1 */  
+	HIL_CMD_AK2	= 0x49,	/* Acknowledge2 */
+	HIL_CMD_AK3	= 0x4a,	/* Acknowledge3 */
+	HIL_CMD_AK4	= 0x4b,	/* Acknowledge4 */
+	HIL_CMD_AK5	= 0x4c,	/* Acknowledge5 */
+	HIL_CMD_AK6	= 0x4d,	/* Acknowledge6 */
+	HIL_CMD_AK7	= 0x4e,	/* Acknowledge7 */
+	HIL_CMD_ACK	= 0x4f,	/* Acknowledge (General Purpose) */
 
 	/* 0x50 to 0x78 reserved for future use  */
 	/* 0x80 to 0xEF device-specific commands */
diff --git a/include/linux/hw_breakpoint.h b/include/linux/hw_breakpoint.h
index 5977b724f7c6..c70d27af03f9 100644
--- a/include/linux/hw_breakpoint.h
+++ b/include/linux/hw_breakpoint.h
@@ -66,14 +66,14 @@ register_wide_hw_breakpoint_cpu(struct perf_event_attr *attr,
 				perf_overflow_handler_t	triggered,
 				int cpu);
 
-extern struct perf_event **
+extern struct perf_event * __percpu *
 register_wide_hw_breakpoint(struct perf_event_attr *attr,
 			    perf_overflow_handler_t triggered);
 
 extern int register_perf_hw_breakpoint(struct perf_event *bp);
 extern int __register_perf_hw_breakpoint(struct perf_event *bp);
 extern void unregister_hw_breakpoint(struct perf_event *bp);
-extern void unregister_wide_hw_breakpoint(struct perf_event **cpu_events);
+extern void unregister_wide_hw_breakpoint(struct perf_event * __percpu *cpu_events);
 
 extern int dbg_reserve_bp_slot(struct perf_event *bp);
 extern int dbg_release_bp_slot(struct perf_event *bp);
@@ -100,7 +100,7 @@ static inline struct perf_event *
 register_wide_hw_breakpoint_cpu(struct perf_event_attr *attr,
 				perf_overflow_handler_t	 triggered,
 				int cpu)		{ return NULL; }
-static inline struct perf_event **
+static inline struct perf_event * __percpu *
 register_wide_hw_breakpoint(struct perf_event_attr *attr,
 			    perf_overflow_handler_t triggered)	{ return NULL; }
 static inline int
@@ -109,7 +109,7 @@ static inline int
 __register_perf_hw_breakpoint(struct perf_event *bp) 	{ return -ENOSYS; }
 static inline void unregister_hw_breakpoint(struct perf_event *bp)	{ }
 static inline void
-unregister_wide_hw_breakpoint(struct perf_event **cpu_events)		{ }
+unregister_wide_hw_breakpoint(struct perf_event * __percpu *cpu_events)	{ }
 static inline int
 reserve_bp_slot(struct perf_event *bp)			{return -ENOSYS; }
 static inline void release_bp_slot(struct perf_event *bp) 		{ }
diff --git a/include/linux/i2c-algo-bit.h b/include/linux/i2c-algo-bit.h
index 111334f5b922..4f98148c11c3 100644
--- a/include/linux/i2c-algo-bit.h
+++ b/include/linux/i2c-algo-bit.h
@@ -36,6 +36,8 @@ struct i2c_algo_bit_data {
 	void (*setscl) (void *data, int state);
 	int  (*getsda) (void *data);
 	int  (*getscl) (void *data);
+	int  (*pre_xfer)  (struct i2c_adapter *);
+	void (*post_xfer) (struct i2c_adapter *);
 
 	/* local settings */
 	int udelay;		/* half clock cycle time in us,
diff --git a/include/linux/i2c-xiic.h b/include/linux/i2c-xiic.h
new file mode 100644
index 000000000000..4f9f2256a97e
--- /dev/null
+++ b/include/linux/i2c-xiic.h
@@ -0,0 +1,43 @@
+/*
+ * i2c-xiic.h
+ * Copyright (c) 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Supports:
+ * Xilinx IIC
+ */
+
+#ifndef _LINUX_I2C_XIIC_H
+#define _LINUX_I2C_XIIC_H
+
+/**
+ * struct xiic_i2c_platform_data - Platform data of the Xilinx I2C driver
+ * @num_devices:	Number of devices that shall be added when the driver
+ *			is probed.
+ * @devices:		The actuall devices to add.
+ *
+ * This purpose of this platform data struct is to be able to provide a number
+ * of devices that should be added to the I2C bus. The reason is that sometimes
+ * the I2C board info is not enough, a new PCI board can for instance be
+ * plugged into a standard PC, and the bus number might be unknown at
+ * early init time.
+ */
+struct xiic_i2c_platform_data {
+	u8				num_devices;
+	struct i2c_board_info const	*devices;
+};
+
+#endif /* _LINUX_I2C_XIIC_H */
diff --git a/include/linux/init_task.h b/include/linux/init_task.h
index abec69b63d7e..b1ed1cd8e2a8 100644
--- a/include/linux/init_task.h
+++ b/include/linux/init_task.h
@@ -32,14 +32,6 @@ extern struct fs_struct init_fs;
 }
 
 extern struct nsproxy init_nsproxy;
-#define INIT_NSPROXY(nsproxy) {						\
-	.pid_ns		= &init_pid_ns,					\
-	.count		= ATOMIC_INIT(1),				\
-	.uts_ns		= &init_uts_ns,					\
-	.mnt_ns		= NULL,						\
-	INIT_NET_NS(net_ns)                                             \
-	INIT_IPC_NS(ipc_ns)						\
-}
 
 #define INIT_SIGHAND(sighand) {						\
 	.count		= ATOMIC_INIT(1), 				\
diff --git a/include/linux/input.h b/include/linux/input.h
index dc24effb6d0e..7ed2251b33f1 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -58,10 +58,10 @@ struct input_absinfo {
 
 #define EVIOCGVERSION		_IOR('E', 0x01, int)			/* get driver version */
 #define EVIOCGID		_IOR('E', 0x02, struct input_id)	/* get device ID */
-#define EVIOCGREP		_IOR('E', 0x03, int[2])			/* get repeat settings */
-#define EVIOCSREP		_IOW('E', 0x03, int[2])			/* set repeat settings */
-#define EVIOCGKEYCODE		_IOR('E', 0x04, int[2])			/* get keycode */
-#define EVIOCSKEYCODE		_IOW('E', 0x04, int[2])			/* set keycode */
+#define EVIOCGREP		_IOR('E', 0x03, unsigned int[2])	/* get repeat settings */
+#define EVIOCSREP		_IOW('E', 0x03, unsigned int[2])	/* set repeat settings */
+#define EVIOCGKEYCODE		_IOR('E', 0x04, unsigned int[2])	/* get keycode */
+#define EVIOCSKEYCODE		_IOW('E', 0x04, unsigned int[2])	/* set keycode */
 
 #define EVIOCGNAME(len)		_IOC(_IOC_READ, 'E', 0x06, len)		/* get device name */
 #define EVIOCGPHYS(len)		_IOC(_IOC_READ, 'E', 0x07, len)		/* get physical location */
@@ -1142,8 +1142,10 @@ struct input_dev {
 	unsigned int keycodemax;
 	unsigned int keycodesize;
 	void *keycode;
-	int (*setkeycode)(struct input_dev *dev, int scancode, int keycode);
-	int (*getkeycode)(struct input_dev *dev, int scancode, int *keycode);
+	int (*setkeycode)(struct input_dev *dev,
+			  unsigned int scancode, unsigned int keycode);
+	int (*getkeycode)(struct input_dev *dev,
+			  unsigned int scancode, unsigned int *keycode);
 
 	struct ff_device *ff;
 
@@ -1415,8 +1417,10 @@ static inline void input_set_abs_params(struct input_dev *dev, int axis, int min
 	dev->absbit[BIT_WORD(axis)] |= BIT_MASK(axis);
 }
 
-int input_get_keycode(struct input_dev *dev, int scancode, int *keycode);
-int input_set_keycode(struct input_dev *dev, int scancode, int keycode);
+int input_get_keycode(struct input_dev *dev,
+		      unsigned int scancode, unsigned int *keycode);
+int input_set_keycode(struct input_dev *dev,
+		      unsigned int scancode, unsigned int keycode);
 
 extern struct class input_class;
 
diff --git a/include/linux/iocontext.h b/include/linux/iocontext.h
index 1195a806fe0c..a0bb301afac0 100644
--- a/include/linux/iocontext.h
+++ b/include/linux/iocontext.h
@@ -42,7 +42,7 @@ struct io_context {
 	unsigned short ioprio;
 	unsigned short ioprio_changed;
 
-#ifdef CONFIG_BLK_CGROUP
+#if defined(CONFIG_BLK_CGROUP) || defined(CONFIG_BLK_CGROUP_MODULE)
 	unsigned short cgroup_changed;
 #endif
 
diff --git a/include/linux/ioport.h b/include/linux/ioport.h
index dda98410d588..71ab79da7e7f 100644
--- a/include/linux/ioport.h
+++ b/include/linux/ioport.h
@@ -34,22 +34,24 @@ struct resource_list {
  */
 #define IORESOURCE_BITS		0x000000ff	/* Bus-specific bits */
 
-#define IORESOURCE_TYPE_BITS	0x00000f00	/* Resource type */
+#define IORESOURCE_TYPE_BITS	0x00001f00	/* Resource type */
 #define IORESOURCE_IO		0x00000100
 #define IORESOURCE_MEM		0x00000200
 #define IORESOURCE_IRQ		0x00000400
 #define IORESOURCE_DMA		0x00000800
+#define IORESOURCE_BUS		0x00001000
 
-#define IORESOURCE_PREFETCH	0x00001000	/* No side effects */
-#define IORESOURCE_READONLY	0x00002000
-#define IORESOURCE_CACHEABLE	0x00004000
-#define IORESOURCE_RANGELENGTH	0x00008000
-#define IORESOURCE_SHADOWABLE	0x00010000
+#define IORESOURCE_PREFETCH	0x00002000	/* No side effects */
+#define IORESOURCE_READONLY	0x00004000
+#define IORESOURCE_CACHEABLE	0x00008000
+#define IORESOURCE_RANGELENGTH	0x00010000
+#define IORESOURCE_SHADOWABLE	0x00020000
 
-#define IORESOURCE_SIZEALIGN	0x00020000	/* size indicates alignment */
-#define IORESOURCE_STARTALIGN	0x00040000	/* start field is alignment */
+#define IORESOURCE_SIZEALIGN	0x00040000	/* size indicates alignment */
+#define IORESOURCE_STARTALIGN	0x00080000	/* start field is alignment */
 
 #define IORESOURCE_MEM_64	0x00100000
+#define IORESOURCE_WINDOW	0x00200000	/* forwarded by bridge */
 
 #define IORESOURCE_EXCLUSIVE	0x08000000	/* Userland may not map this resource */
 #define IORESOURCE_DISABLED	0x10000000
diff --git a/include/linux/ipc_namespace.h b/include/linux/ipc_namespace.h
index 07baa38bce37..51952989ad42 100644
--- a/include/linux/ipc_namespace.h
+++ b/include/linux/ipc_namespace.h
@@ -62,11 +62,6 @@ extern struct ipc_namespace init_ipc_ns;
 extern atomic_t nr_ipc_ns;
 
 extern spinlock_t mq_lock;
-#if defined(CONFIG_POSIX_MQUEUE) || defined(CONFIG_SYSVIPC)
-#define INIT_IPC_NS(ns)		.ns		= &init_ipc_ns,
-#else
-#define INIT_IPC_NS(ns)
-#endif
 
 #ifdef CONFIG_SYSVIPC
 extern int register_ipcns_notifier(struct ipc_namespace *);
diff --git a/include/linux/ipmi_smi.h b/include/linux/ipmi_smi.h
index f7c9c75a2775..4b48318ac542 100644
--- a/include/linux/ipmi_smi.h
+++ b/include/linux/ipmi_smi.h
@@ -39,7 +39,6 @@
 #include <linux/module.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
-#include <linux/ipmi_smi.h>
 
 /* This files describes the interface for IPMI system management interface
    drivers to bind into the IPMI message handler. */
diff --git a/include/linux/kmod.h b/include/linux/kmod.h
index 384ca8bbf1ac..facb27fe7de0 100644
--- a/include/linux/kmod.h
+++ b/include/linux/kmod.h
@@ -27,6 +27,7 @@
 #define KMOD_PATH_LEN 256
 
 #ifdef CONFIG_MODULES
+extern char modprobe_path[]; /* for sysctl */
 /* modprobe exit status on success, -ve on error.  Return value
  * usually useless though. */
 extern int __request_module(bool wait, const char *name, ...) \
diff --git a/include/linux/kobject.h b/include/linux/kobject.h
index 58ae8e00fcdd..3950d3c2850d 100644
--- a/include/linux/kobject.h
+++ b/include/linux/kobject.h
@@ -106,7 +106,7 @@ extern char *kobject_get_path(struct kobject *kobj, gfp_t flag);
 
 struct kobj_type {
 	void (*release)(struct kobject *kobj);
-	struct sysfs_ops *sysfs_ops;
+	const struct sysfs_ops *sysfs_ops;
 	struct attribute **default_attrs;
 };
 
@@ -118,9 +118,9 @@ struct kobj_uevent_env {
 };
 
 struct kset_uevent_ops {
-	int (*filter)(struct kset *kset, struct kobject *kobj);
-	const char *(*name)(struct kset *kset, struct kobject *kobj);
-	int (*uevent)(struct kset *kset, struct kobject *kobj,
+	int (* const filter)(struct kset *kset, struct kobject *kobj);
+	const char *(* const name)(struct kset *kset, struct kobject *kobj);
+	int (* const uevent)(struct kset *kset, struct kobject *kobj,
 		      struct kobj_uevent_env *env);
 };
 
@@ -132,7 +132,7 @@ struct kobj_attribute {
 			 const char *buf, size_t count);
 };
 
-extern struct sysfs_ops kobj_sysfs_ops;
+extern const struct sysfs_ops kobj_sysfs_ops;
 
 /**
  * struct kset - a set of kobjects of a specific type, belonging to a specific subsystem.
@@ -155,14 +155,14 @@ struct kset {
 	struct list_head list;
 	spinlock_t list_lock;
 	struct kobject kobj;
-	struct kset_uevent_ops *uevent_ops;
+	const struct kset_uevent_ops *uevent_ops;
 };
 
 extern void kset_init(struct kset *kset);
 extern int __must_check kset_register(struct kset *kset);
 extern void kset_unregister(struct kset *kset);
 extern struct kset * __must_check kset_create_and_add(const char *name,
-						struct kset_uevent_ops *u,
+						const struct kset_uevent_ops *u,
 						struct kobject *parent_kobj);
 
 static inline struct kset *to_kset(struct kobject *kobj)
diff --git a/include/linux/lockdep.h b/include/linux/lockdep.h
index 10206a87da19..a03977a96d7e 100644
--- a/include/linux/lockdep.h
+++ b/include/linux/lockdep.h
@@ -12,6 +12,10 @@
 struct task_struct;
 struct lockdep_map;
 
+/* for sysctl */
+extern int prove_locking;
+extern int lock_stat;
+
 #ifdef CONFIG_LOCKDEP
 
 #include <linux/linkage.h>
diff --git a/include/linux/lru_cache.h b/include/linux/lru_cache.h
index 3a2b2d9b0472..de48d167568b 100644
--- a/include/linux/lru_cache.h
+++ b/include/linux/lru_cache.h
@@ -64,7 +64,7 @@ For crash recovery after replication node failure,
   usually the condition is softened to regions that _may_ have been target of
   in-flight WRITE IO, e.g. by only lazily clearing the on-disk write-intent
   bitmap, trading frequency of meta data transactions against amount of
-  (possibly unneccessary) resync traffic.
+  (possibly unnecessary) resync traffic.
 
   If we set a hard limit on the area that may be "hot" at any given time, we
   limit the amount of resync traffic needed for crash recovery.
diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h
index 1f9b119f4ace..44301c6affa8 100644
--- a/include/linux/memcontrol.h
+++ b/include/linux/memcontrol.h
@@ -124,7 +124,6 @@ static inline bool mem_cgroup_disabled(void)
 	return false;
 }
 
-extern bool mem_cgroup_oom_called(struct task_struct *task);
 void mem_cgroup_update_file_mapped(struct page *page, int val);
 unsigned long mem_cgroup_soft_limit_reclaim(struct zone *zone, int order,
 						gfp_t gfp_mask, int nid,
@@ -258,11 +257,6 @@ static inline bool mem_cgroup_disabled(void)
 	return true;
 }
 
-static inline bool mem_cgroup_oom_called(struct task_struct *task)
-{
-	return false;
-}
-
 static inline int
 mem_cgroup_inactive_anon_is_low(struct mem_cgroup *memcg)
 {
diff --git a/include/linux/memory.h b/include/linux/memory.h
index 1adfe779eb99..85582e1bcee9 100644
--- a/include/linux/memory.h
+++ b/include/linux/memory.h
@@ -36,6 +36,8 @@ struct memory_block {
 	struct sys_device sysdev;
 };
 
+int arch_get_memory_phys_device(unsigned long start_pfn);
+
 /* These states are exposed to userspace as text strings in sysfs */
 #define	MEM_ONLINE		(1<<0) /* exposed to userspace */
 #define	MEM_GOING_OFFLINE	(1<<1) /* exposed to userspace */
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 3899395a03de..e70f21beb4b4 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -971,7 +971,13 @@ static inline void setmax_mm_hiwater_rss(unsigned long *maxrss,
 		*maxrss = hiwater_rss;
 }
 
+#if defined(SPLIT_RSS_COUNTING)
 void sync_mm_rss(struct task_struct *task, struct mm_struct *mm);
+#else
+static inline void sync_mm_rss(struct task_struct *task, struct mm_struct *mm)
+{
+}
+#endif
 
 /*
  * A callback you can register to apply pressure to ageable caches.
@@ -1459,5 +1465,7 @@ extern void shake_page(struct page *p, int access);
 extern atomic_long_t mce_bad_pages;
 extern int soft_offline_page(struct page *page, int flags);
 
+extern void dump_page(struct page *page);
+
 #endif /* __KERNEL__ */
 #endif /* _LINUX_MM_H */
diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
index 048b46270aa5..b8bb9a6a1f37 100644
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -203,7 +203,7 @@ enum {
 	NR_MM_COUNTERS
 };
 
-#if USE_SPLIT_PTLOCKS
+#if USE_SPLIT_PTLOCKS && defined(CONFIG_MMU)
 #define SPLIT_RSS_COUNTING
 struct mm_rss_stat {
 	atomic_long_t count[NR_MM_COUNTERS];
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index bc209d8b7b5c..cf9e458e96b0 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -342,7 +342,7 @@ struct zone {
 	 * prev_priority holds the scanning priority for this zone.  It is
 	 * defined as the scanning priority at which we achieved our reclaim
 	 * target at the previous try_to_free_pages() or balance_pgdat()
-	 * invokation.
+	 * invocation.
 	 *
 	 * We use prev_priority as a measure of how much stress page reclaim is
 	 * under - it drives the swappiness decision: whether to unmap mapped
diff --git a/include/linux/module.h b/include/linux/module.h
index dd618eb026aa..5e869ffd34aa 100644
--- a/include/linux/module.h
+++ b/include/linux/module.h
@@ -175,6 +175,7 @@ struct notifier_block;
 
 #ifdef CONFIG_MODULES
 
+extern int modules_disabled; /* for sysctl */
 /* Get/put a kernel symbol (calls must be symmetric) */
 void *__symbol_get(const char *symbol);
 void *__symbol_get_gpl(const char *symbol);
diff --git a/include/linux/msdos_fs.h b/include/linux/msdos_fs.h
index ce38f1caa5e1..34066e65fdeb 100644
--- a/include/linux/msdos_fs.h
+++ b/include/linux/msdos_fs.h
@@ -15,6 +15,7 @@
 #define MSDOS_DPB_BITS	4		/* log2(MSDOS_DPB) */
 #define MSDOS_DPS	(SECTOR_SIZE / sizeof(struct msdos_dir_entry))
 #define MSDOS_DPS_BITS	4		/* log2(MSDOS_DPS) */
+#define MSDOS_LONGNAME	256		/* maximum name length */
 #define CF_LE_W(v)	le16_to_cpu(v)
 #define CF_LE_L(v)	le32_to_cpu(v)
 #define CT_LE_W(v)	cpu_to_le16(v)
@@ -47,8 +48,8 @@
 #define DELETED_FLAG	0xe5	/* marks file as deleted when in name[0] */
 #define IS_FREE(n)	(!*(n) || *(n) == DELETED_FLAG)
 
+#define FAT_LFN_LEN	255	/* maximum long name length */
 #define MSDOS_NAME	11	/* maximum name length */
-#define MSDOS_LONGNAME	256	/* maximum name length */
 #define MSDOS_SLOTS	21	/* max # of slots for short and long names */
 #define MSDOS_DOT	".          "	/* ".", padded to MSDOS_NAME chars */
 #define MSDOS_DOTDOT	"..         "	/* "..", padded to MSDOS_NAME chars */
diff --git a/include/linux/nodemask.h b/include/linux/nodemask.h
index c4fa64b585ff..dba35e413371 100644
--- a/include/linux/nodemask.h
+++ b/include/linux/nodemask.h
@@ -483,7 +483,7 @@ static inline int num_node_state(enum node_states state)
 			type *name = kmalloc(sizeof(*name), gfp_flags)
 #define NODEMASK_FREE(m)			kfree(m)
 #else
-#define NODEMASK_ALLOC(type, name, gfp_flags)	type _name, *name = &_name
+#define NODEMASK_ALLOC(type, name, gfp_flags)	type _##name, *name = &_##name
 #define NODEMASK_FREE(m)			do {} while (0)
 #endif
 
diff --git a/include/linux/of.h b/include/linux/of.h
index f6d9cbc39c9c..a367e19bb3af 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -127,7 +127,7 @@ static inline unsigned long of_read_ulong(const __be32 *cell, int size)
 
 /* Default string compare functions, Allow arch asm/prom.h to override */
 #if !defined(of_compat_cmp)
-#define of_compat_cmp(s1, s2, l)	strncasecmp((s1), (s2), (l))
+#define of_compat_cmp(s1, s2, l)	strcasecmp((s1), (s2))
 #define of_prop_cmp(s1, s2)		strcmp((s1), (s2))
 #define of_node_cmp(s1, s2)		strcasecmp((s1), (s2))
 #endif
diff --git a/include/linux/page_cgroup.h b/include/linux/page_cgroup.h
index b0e4eb126236..30b08136fdf3 100644
--- a/include/linux/page_cgroup.h
+++ b/include/linux/page_cgroup.h
@@ -118,6 +118,8 @@ static inline void __init page_cgroup_init_flatmem(void)
 #include <linux/swap.h>
 
 #ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP
+extern unsigned short swap_cgroup_cmpxchg(swp_entry_t ent,
+					unsigned short old, unsigned short new);
 extern unsigned short swap_cgroup_record(swp_entry_t ent, unsigned short id);
 extern unsigned short lookup_swap_cgroup(swp_entry_t ent);
 extern int swap_cgroup_swapon(int type, unsigned long max_pages);
diff --git a/include/linux/pci-dma.h b/include/linux/pci-dma.h
new file mode 100644
index 000000000000..549a041f9c08
--- /dev/null
+++ b/include/linux/pci-dma.h
@@ -0,0 +1,11 @@
+#ifndef _LINUX_PCI_DMA_H
+#define _LINUX_PCI_DMA_H
+
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) DEFINE_DMA_UNMAP_ADDR(ADDR_NAME);
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)   DEFINE_DMA_UNMAP_LEN(LEN_NAME);
+#define pci_unmap_addr             dma_unmap_addr
+#define pci_unmap_addr_set         dma_unmap_addr_set
+#define pci_unmap_len              dma_unmap_len
+#define pci_unmap_len_set          dma_unmap_len_set
+
+#endif
diff --git a/include/linux/pci.h b/include/linux/pci.h
index cd5809a5963e..a788fa12ff31 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -769,8 +769,6 @@ int pci_try_set_mwi(struct pci_dev *dev);
 void pci_clear_mwi(struct pci_dev *dev);
 void pci_intx(struct pci_dev *dev, int enable);
 void pci_msi_off(struct pci_dev *dev);
-int pci_set_dma_mask(struct pci_dev *dev, u64 mask);
-int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask);
 int pci_set_dma_max_seg_size(struct pci_dev *dev, unsigned int size);
 int pci_set_dma_seg_boundary(struct pci_dev *dev, unsigned long mask);
 int pcix_get_max_mmrbc(struct pci_dev *dev);
@@ -904,6 +902,7 @@ int pci_set_vga_state(struct pci_dev *pdev, bool decode,
 		      unsigned int command_bits, bool change_bridge);
 /* kmem_cache style wrapper around pci_alloc_consistent() */
 
+#include <linux/pci-dma.h>
 #include <linux/dmapool.h>
 
 #define	pci_pool dma_pool
diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index 7b18b4fd5df7..95477038a72a 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -452,6 +452,8 @@ enum perf_callchain_context {
 #include <linux/fs.h>
 #include <linux/pid_namespace.h>
 #include <linux/workqueue.h>
+#include <linux/ftrace.h>
+#include <linux/cpu.h>
 #include <asm/atomic.h>
 
 #define PERF_MAX_STACK_DEPTH		255
@@ -487,9 +489,8 @@ struct hw_perf_event {
 			struct hrtimer	hrtimer;
 		};
 #ifdef CONFIG_HAVE_HW_BREAKPOINT
-		union { /* breakpoint */
-			struct arch_hw_breakpoint	info;
-		};
+		/* breakpoint */
+		struct arch_hw_breakpoint	info;
 #endif
 	};
 	atomic64_t			prev_count;
@@ -802,6 +803,13 @@ struct perf_sample_data {
 	struct perf_raw_record		*raw;
 };
 
+static inline
+void perf_sample_data_init(struct perf_sample_data *data, u64 addr)
+{
+	data->addr = addr;
+	data->raw  = NULL;
+}
+
 extern void perf_output_sample(struct perf_output_handle *handle,
 			       struct perf_event_header *header,
 			       struct perf_sample_data *data,
@@ -841,6 +849,44 @@ perf_sw_event(u32 event_id, u64 nr, int nmi, struct pt_regs *regs, u64 addr)
 		__perf_sw_event(event_id, nr, nmi, regs, addr);
 }
 
+extern void
+perf_arch_fetch_caller_regs(struct pt_regs *regs, unsigned long ip, int skip);
+
+/*
+ * Take a snapshot of the regs. Skip ip and frame pointer to
+ * the nth caller. We only need a few of the regs:
+ * - ip for PERF_SAMPLE_IP
+ * - cs for user_mode() tests
+ * - bp for callchains
+ * - eflags, for future purposes, just in case
+ */
+static inline void perf_fetch_caller_regs(struct pt_regs *regs, int skip)
+{
+	unsigned long ip;
+
+	memset(regs, 0, sizeof(*regs));
+
+	switch (skip) {
+	case 1 :
+		ip = CALLER_ADDR0;
+		break;
+	case 2 :
+		ip = CALLER_ADDR1;
+		break;
+	case 3 :
+		ip = CALLER_ADDR2;
+		break;
+	case 4:
+		ip = CALLER_ADDR3;
+		break;
+	/* No need to support further for now */
+	default:
+		ip = 0;
+	}
+
+	return perf_arch_fetch_caller_regs(regs, ip, skip);
+}
+
 extern void __perf_event_mmap(struct vm_area_struct *vma);
 
 static inline void perf_event_mmap(struct vm_area_struct *vma)
@@ -858,8 +904,24 @@ extern int sysctl_perf_event_paranoid;
 extern int sysctl_perf_event_mlock;
 extern int sysctl_perf_event_sample_rate;
 
+static inline bool perf_paranoid_tracepoint_raw(void)
+{
+	return sysctl_perf_event_paranoid > -1;
+}
+
+static inline bool perf_paranoid_cpu(void)
+{
+	return sysctl_perf_event_paranoid > 0;
+}
+
+static inline bool perf_paranoid_kernel(void)
+{
+	return sysctl_perf_event_paranoid > 1;
+}
+
 extern void perf_event_init(void);
-extern void perf_tp_event(int event_id, u64 addr, u64 count, void *record, int entry_size);
+extern void perf_tp_event(int event_id, u64 addr, u64 count, void *record,
+			  int entry_size, struct pt_regs *regs);
 extern void perf_bp_event(struct perf_event *event, void *data);
 
 #ifndef perf_misc_flags
@@ -915,5 +977,21 @@ static inline void perf_event_disable(struct perf_event *event)		{ }
 #define perf_output_put(handle, x) \
 	perf_output_copy((handle), &(x), sizeof(x))
 
+/*
+ * This has to have a higher priority than migration_notifier in sched.c.
+ */
+#define perf_cpu_notifier(fn)					\
+do {								\
+	static struct notifier_block fn##_nb __cpuinitdata =	\
+		{ .notifier_call = fn, .priority = 20 };	\
+	fn(&fn##_nb, (unsigned long)CPU_UP_PREPARE,		\
+		(void *)(unsigned long)smp_processor_id());	\
+	fn(&fn##_nb, (unsigned long)CPU_STARTING,		\
+		(void *)(unsigned long)smp_processor_id());	\
+	fn(&fn##_nb, (unsigned long)CPU_ONLINE,			\
+		(void *)(unsigned long)smp_processor_id());	\
+	register_cpu_notifier(&fn##_nb);			\
+} while (0)
+
 #endif /* __KERNEL__ */
 #endif /* _LINUX_PERF_EVENT_H */
diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h
index 71ff887ca44e..212da17d06af 100644
--- a/include/linux/platform_device.h
+++ b/include/linux/platform_device.h
@@ -21,7 +21,7 @@ struct platform_device {
 	u32		num_resources;
 	struct resource	* resource;
 
-	struct platform_device_id	*id_entry;
+	const struct platform_device_id	*id_entry;
 
 	/* arch specific additions */
 	struct pdev_archdata	archdata;
@@ -62,7 +62,7 @@ struct platform_driver {
 	int (*suspend)(struct platform_device *, pm_message_t state);
 	int (*resume)(struct platform_device *);
 	struct device_driver driver;
-	struct platform_device_id *id_table;
+	const struct platform_device_id *id_table;
 };
 
 extern int platform_driver_register(struct platform_driver *);
@@ -77,6 +77,11 @@ extern int platform_driver_probe(struct platform_driver *driver,
 #define platform_get_drvdata(_dev)	dev_get_drvdata(&(_dev)->dev)
 #define platform_set_drvdata(_dev,data)	dev_set_drvdata(&(_dev)->dev, (data))
 
+extern struct platform_device *platform_create_bundle(struct platform_driver *driver,
+					int (*probe)(struct platform_device *),
+					struct resource *res, unsigned int n_res,
+					const void *data, size_t size);
+
 /* early platform driver interface */
 struct early_platform_driver {
 	const char *class_str;
diff --git a/include/linux/poll.h b/include/linux/poll.h
index 6673743946f7..600cc1fde64d 100644
--- a/include/linux/poll.h
+++ b/include/linux/poll.h
@@ -10,8 +10,10 @@
 #include <linux/wait.h>
 #include <linux/string.h>
 #include <linux/fs.h>
+#include <linux/sysctl.h>
 #include <asm/uaccess.h>
 
+extern struct ctl_table epoll_table[]; /* for sysctl */
 /* ~832 bytes of stack space used max in sys_select/sys_poll before allocating
    additional memory. */
 #define MAX_STACK_ALLOC 832
diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h
index b5d096d3a9be..ebd2b8fb00d0 100644
--- a/include/linux/power_supply.h
+++ b/include/linux/power_supply.h
@@ -82,6 +82,7 @@ enum power_supply_property {
 	POWER_SUPPLY_PROP_PRESENT,
 	POWER_SUPPLY_PROP_ONLINE,
 	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_CYCLE_COUNT,
 	POWER_SUPPLY_PROP_VOLTAGE_MAX,
 	POWER_SUPPLY_PROP_VOLTAGE_MIN,
 	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
diff --git a/include/linux/ptrace.h b/include/linux/ptrace.h
index c5eab89da51e..e1fb60729979 100644
--- a/include/linux/ptrace.h
+++ b/include/linux/ptrace.h
@@ -264,6 +264,9 @@ static inline void user_enable_single_step(struct task_struct *task)
 static inline void user_disable_single_step(struct task_struct *task)
 {
 }
+#else
+extern void user_enable_single_step(struct task_struct *);
+extern void user_disable_single_step(struct task_struct *);
 #endif	/* arch_has_single_step */
 
 #ifndef arch_has_block_step
@@ -291,6 +294,8 @@ static inline void user_enable_block_step(struct task_struct *task)
 {
 	BUG();			/* This can never be called.  */
 }
+#else
+extern void user_enable_block_step(struct task_struct *);
 #endif	/* arch_has_block_step */
 
 #ifdef ARCH_HAS_USER_SINGLE_STEP_INFO
diff --git a/include/linux/rbtree.h b/include/linux/rbtree.h
index 9c295411d01f..5210a5c60877 100644
--- a/include/linux/rbtree.h
+++ b/include/linux/rbtree.h
@@ -25,10 +25,10 @@
 
   Some example of insert and search follows here. The search is a plain
   normal search over an ordered tree. The insert instead must be implemented
-  int two steps: as first thing the code must insert the element in
-  order as a red leaf in the tree, then the support library function
-  rb_insert_color() must be called. Such function will do the
-  not trivial work to rebalance the rbtree if necessary.
+  in two steps: First, the code must insert the element in order as a red leaf
+  in the tree, and then the support library function rb_insert_color() must
+  be called. Such function will do the not trivial work to rebalance the
+  rbtree, if necessary.
 
 -----------------------------------------------------------------------
 static inline struct page * rb_search_page_cache(struct inode * inode,
diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h
index c84373626336..3024050c82a1 100644
--- a/include/linux/rcupdate.h
+++ b/include/linux/rcupdate.h
@@ -41,6 +41,10 @@
 #include <linux/lockdep.h>
 #include <linux/completion.h>
 
+#ifdef CONFIG_RCU_TORTURE_TEST
+extern int rcutorture_runnable; /* for sysctl */
+#endif /* #ifdef CONFIG_RCU_TORTURE_TEST */
+
 /**
  * struct rcu_head - callback structure for use with RCU
  * @next: next update requests in a list
@@ -97,6 +101,11 @@ extern struct lockdep_map rcu_sched_lock_map;
 # define rcu_read_release_sched() \
 		lock_release(&rcu_sched_lock_map, 1, _THIS_IP_)
 
+static inline int debug_lockdep_rcu_enabled(void)
+{
+	return likely(rcu_scheduler_active && debug_locks);
+}
+
 /**
  * rcu_read_lock_held - might we be in RCU read-side critical section?
  *
@@ -104,12 +113,14 @@ extern struct lockdep_map rcu_sched_lock_map;
  * an RCU read-side critical section.  In absence of CONFIG_PROVE_LOCKING,
  * this assumes we are in an RCU read-side critical section unless it can
  * prove otherwise.
+ *
+ * Check rcu_scheduler_active to prevent false positives during boot.
  */
 static inline int rcu_read_lock_held(void)
 {
-	if (debug_locks)
-		return lock_is_held(&rcu_lock_map);
-	return 1;
+	if (!debug_lockdep_rcu_enabled())
+		return 1;
+	return lock_is_held(&rcu_lock_map);
 }
 
 /**
@@ -119,12 +130,14 @@ static inline int rcu_read_lock_held(void)
  * an RCU-bh read-side critical section.  In absence of CONFIG_PROVE_LOCKING,
  * this assumes we are in an RCU-bh read-side critical section unless it can
  * prove otherwise.
+ *
+ * Check rcu_scheduler_active to prevent false positives during boot.
  */
 static inline int rcu_read_lock_bh_held(void)
 {
-	if (debug_locks)
-		return lock_is_held(&rcu_bh_lock_map);
-	return 1;
+	if (!debug_lockdep_rcu_enabled())
+		return 1;
+	return lock_is_held(&rcu_bh_lock_map);
 }
 
 /**
@@ -135,15 +148,26 @@ static inline int rcu_read_lock_bh_held(void)
  * this assumes we are in an RCU-sched read-side critical section unless it
  * can prove otherwise.  Note that disabling of preemption (including
  * disabling irqs) counts as an RCU-sched read-side critical section.
+ *
+ * Check rcu_scheduler_active to prevent false positives during boot.
  */
+#ifdef CONFIG_PREEMPT
 static inline int rcu_read_lock_sched_held(void)
 {
 	int lockdep_opinion = 0;
 
+	if (!debug_lockdep_rcu_enabled())
+		return 1;
 	if (debug_locks)
 		lockdep_opinion = lock_is_held(&rcu_sched_lock_map);
-	return lockdep_opinion || preempt_count() != 0 || !rcu_scheduler_active;
+	return lockdep_opinion || preempt_count() != 0;
+}
+#else /* #ifdef CONFIG_PREEMPT */
+static inline int rcu_read_lock_sched_held(void)
+{
+	return 1;
 }
+#endif /* #else #ifdef CONFIG_PREEMPT */
 
 #else /* #ifdef CONFIG_DEBUG_LOCK_ALLOC */
 
@@ -164,10 +188,17 @@ static inline int rcu_read_lock_bh_held(void)
 	return 1;
 }
 
+#ifdef CONFIG_PREEMPT
 static inline int rcu_read_lock_sched_held(void)
 {
-	return preempt_count() != 0 || !rcu_scheduler_active;
+	return !rcu_scheduler_active || preempt_count() != 0;
+}
+#else /* #ifdef CONFIG_PREEMPT */
+static inline int rcu_read_lock_sched_held(void)
+{
+	return 1;
 }
+#endif /* #else #ifdef CONFIG_PREEMPT */
 
 #endif /* #else #ifdef CONFIG_DEBUG_LOCK_ALLOC */
 
@@ -184,7 +215,7 @@ static inline int rcu_read_lock_sched_held(void)
  */
 #define rcu_dereference_check(p, c) \
 	({ \
-		if (debug_locks && !(c)) \
+		if (debug_lockdep_rcu_enabled() && !(c)) \
 			lockdep_rcu_dereference(__FILE__, __LINE__); \
 		rcu_dereference_raw(p); \
 	})
diff --git a/include/linux/reboot.h b/include/linux/reboot.h
index 988e55fe649b..3005d5a7fce5 100644
--- a/include/linux/reboot.h
+++ b/include/linux/reboot.h
@@ -64,6 +64,7 @@ extern void kernel_restart(char *cmd);
 extern void kernel_halt(void);
 extern void kernel_power_off(void);
 
+extern int C_A_D; /* for sysctl */
 void ctrl_alt_del(void);
 
 #define POWEROFF_CMD_PATH_LEN	256
diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h
index 97059d08a626..4f82326eb294 100644
--- a/include/linux/rfkill.h
+++ b/include/linux/rfkill.h
@@ -29,7 +29,7 @@
 /**
  * enum rfkill_type - type of rfkill switch.
  *
- * @RFKILL_TYPE_ALL: toggles all switches (userspace only)
+ * @RFKILL_TYPE_ALL: toggles all switches (requests only - not a switch type)
  * @RFKILL_TYPE_WLAN: switch is on a 802.11 wireless network device.
  * @RFKILL_TYPE_BLUETOOTH: switch is on a bluetooth device.
  * @RFKILL_TYPE_UWB: switch is on a ultra wideband device.
diff --git a/include/linux/rtc.h b/include/linux/rtc.h
index 60f88a7fb13d..14dbc83ded20 100644
--- a/include/linux/rtc.h
+++ b/include/linux/rtc.h
@@ -238,6 +238,12 @@ static inline bool is_leap_year(unsigned int year)
 	return (!(year % 4) && (year % 100)) || !(year % 400);
 }
 
+#ifdef CONFIG_RTC_HCTOSYS
+extern int rtc_hctosys_ret;
+#else
+#define rtc_hctosys_ret -ENODEV
+#endif
+
 #endif /* __KERNEL__ */
 
 #endif /* _LINUX_RTC_H_ */
diff --git a/include/linux/rtmutex.h b/include/linux/rtmutex.h
index 281d8fd775e8..8d522ffeda33 100644
--- a/include/linux/rtmutex.h
+++ b/include/linux/rtmutex.h
@@ -16,6 +16,8 @@
 #include <linux/plist.h>
 #include <linux/spinlock_types.h>
 
+extern int max_lock_depth; /* for sysctl */
+
 /**
  * The rt_mutex structure
  *
diff --git a/include/linux/rwlock.h b/include/linux/rwlock.h
index 71e0b00b6f2c..bc2994ed66e1 100644
--- a/include/linux/rwlock.h
+++ b/include/linux/rwlock.h
@@ -29,25 +29,25 @@ do {								\
 #endif
 
 #ifdef CONFIG_DEBUG_SPINLOCK
- extern void do_raw_read_lock(rwlock_t *lock);
+ extern void do_raw_read_lock(rwlock_t *lock) __acquires(lock);
 #define do_raw_read_lock_flags(lock, flags) do_raw_read_lock(lock)
  extern int do_raw_read_trylock(rwlock_t *lock);
- extern void do_raw_read_unlock(rwlock_t *lock);
- extern void do_raw_write_lock(rwlock_t *lock);
+ extern void do_raw_read_unlock(rwlock_t *lock) __releases(lock);
+ extern void do_raw_write_lock(rwlock_t *lock) __acquires(lock);
 #define do_raw_write_lock_flags(lock, flags) do_raw_write_lock(lock)
  extern int do_raw_write_trylock(rwlock_t *lock);
- extern void do_raw_write_unlock(rwlock_t *lock);
+ extern void do_raw_write_unlock(rwlock_t *lock) __releases(lock);
 #else
-# define do_raw_read_lock(rwlock)	arch_read_lock(&(rwlock)->raw_lock)
+# define do_raw_read_lock(rwlock)	do {__acquire(lock); arch_read_lock(&(rwlock)->raw_lock); } while (0)
 # define do_raw_read_lock_flags(lock, flags) \
-		arch_read_lock_flags(&(lock)->raw_lock, *(flags))
+		do {__acquire(lock); arch_read_lock_flags(&(lock)->raw_lock, *(flags)); } while (0)
 # define do_raw_read_trylock(rwlock)	arch_read_trylock(&(rwlock)->raw_lock)
-# define do_raw_read_unlock(rwlock)	arch_read_unlock(&(rwlock)->raw_lock)
-# define do_raw_write_lock(rwlock)	arch_write_lock(&(rwlock)->raw_lock)
+# define do_raw_read_unlock(rwlock)	do {arch_read_unlock(&(rwlock)->raw_lock); __release(lock); } while (0)
+# define do_raw_write_lock(rwlock)	do {__acquire(lock); arch_write_lock(&(rwlock)->raw_lock); } while (0)
 # define do_raw_write_lock_flags(lock, flags) \
-		arch_write_lock_flags(&(lock)->raw_lock, *(flags))
+		do {__acquire(lock); arch_write_lock_flags(&(lock)->raw_lock, *(flags)); } while (0)
 # define do_raw_write_trylock(rwlock)	arch_write_trylock(&(rwlock)->raw_lock)
-# define do_raw_write_unlock(rwlock)	arch_write_unlock(&(rwlock)->raw_lock)
+# define do_raw_write_unlock(rwlock)	do {arch_write_unlock(&(rwlock)->raw_lock); __release(lock); } while (0)
 #endif
 
 #define read_can_lock(rwlock)		arch_read_can_lock(&(rwlock)->raw_lock)
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 46c6f8d5dc06..dad7f668ebf7 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -258,6 +258,10 @@ extern spinlock_t mmlist_lock;
 
 struct task_struct;
 
+#ifdef CONFIG_PROVE_RCU
+extern int lockdep_tasklist_lock_is_held(void);
+#endif /* #ifdef CONFIG_PROVE_RCU */
+
 extern void sched_init(void);
 extern void sched_init_smp(void);
 extern asmlinkage void schedule_tail(struct task_struct *prev);
@@ -1473,7 +1477,7 @@ struct task_struct {
 
 	struct list_head	*scm_work_list;
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	/* Index of current stored adress in ret_stack */
+	/* Index of current stored address in ret_stack */
 	int curr_ret_stack;
 	/* Stack of return addresses for return function tracing */
 	struct ftrace_ret_stack	*ret_stack;
@@ -2391,9 +2395,7 @@ void thread_group_cputimer(struct task_struct *tsk, struct task_cputime *times);
 
 static inline void thread_group_cputime_init(struct signal_struct *sig)
 {
-	sig->cputimer.cputime = INIT_CPUTIME;
 	spin_lock_init(&sig->cputimer.lock);
-	sig->cputimer.running = 0;
 }
 
 static inline void thread_group_cputime_free(struct signal_struct *sig)
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 8c3dd36fe91a..78dd1e7120a9 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -491,9 +491,13 @@ uart_handle_dcd_change(struct uart_port *uport, unsigned int status)
 {
 	struct uart_state *state = uport->state;
 	struct tty_port *port = &state->port;
+	struct tty_ldisc *ld = tty_ldisc_ref(port->tty);
+	struct timespec ts;
 
-	uport->icount.dcd++;
+	if (ld && ld->ops->dcd_change)
+		getnstimeofday(&ts);
 
+	uport->icount.dcd++;
 #ifdef CONFIG_HARD_PPS
 	if ((uport->flags & UPF_HARDPPS_CD) && status)
 		hardpps();
@@ -505,6 +509,11 @@ uart_handle_dcd_change(struct uart_port *uport, unsigned int status)
 		else if (port->tty)
 			tty_hangup(port->tty);
 	}
+
+	if (ld && ld->ops->dcd_change)
+		ld->ops->dcd_change(port->tty, status, &ts);
+	if (ld)
+		tty_ldisc_deref(ld);
 }
 
 /**
diff --git a/include/linux/signal.h b/include/linux/signal.h
index ab9272cc270c..fcd2b14b1932 100644
--- a/include/linux/signal.h
+++ b/include/linux/signal.h
@@ -7,6 +7,8 @@
 #ifdef __KERNEL__
 #include <linux/list.h>
 
+/* for sysctl */
+extern int print_fatal_signals;
 /*
  * Real Time signals may be queued.
  */
diff --git a/include/linux/snmp.h b/include/linux/snmp.h
index e28f5a0182e8..4435d1084755 100644
--- a/include/linux/snmp.h
+++ b/include/linux/snmp.h
@@ -225,6 +225,8 @@ enum
 	LINUX_MIB_SACKSHIFTED,
 	LINUX_MIB_SACKMERGED,
 	LINUX_MIB_SACKSHIFTFALLBACK,
+	LINUX_MIB_TCPBACKLOGDROP,
+	LINUX_MIB_TCPMINTTLDROP, /* RFC 5082 */
 	__LINUX_MIB_MAX
 };
 
diff --git a/include/linux/spi/ads7846.h b/include/linux/spi/ads7846.h
index 51948eb6927a..b4ae570d3c98 100644
--- a/include/linux/spi/ads7846.h
+++ b/include/linux/spi/ads7846.h
@@ -12,7 +12,7 @@ enum ads7846_filter {
 };
 
 struct ads7846_platform_data {
-	u16	model;			/* 7843, 7845, 7846. */
+	u16	model;			/* 7843, 7845, 7846, 7873. */
 	u16	vref_delay_usecs;	/* 0 for external vref; etc */
 	u16	vref_mv;		/* external vref value, milliVolts */
 	bool	keep_vref_on;		/* set to keep vref on for differential
@@ -53,5 +53,6 @@ struct ads7846_platform_data {
 	int	(*filter)	(void *filter_data, int data_idx, int *val);
 	void	(*filter_cleanup)(void *filter_data);
 	void	(*wait_for_sync)(void);
+	bool	wakeup;
 };
 
diff --git a/include/linux/spi/l4f00242t03.h b/include/linux/spi/l4f00242t03.h
new file mode 100644
index 000000000000..aee1dbda4edc
--- /dev/null
+++ b/include/linux/spi/l4f00242t03.h
@@ -0,0 +1,31 @@
+/*
+ * l4f00242t03.h -- Platform glue for Epson L4F00242T03 LCD
+ *
+ * Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
+ * Based on Marek Vasut work in lms283gf05.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#ifndef _INCLUDE_LINUX_SPI_L4F00242T03_H_
+#define _INCLUDE_LINUX_SPI_L4F00242T03_H_
+
+struct l4f00242t03_pdata {
+	unsigned int	reset_gpio;
+	unsigned int	data_enable_gpio;
+	const char 	*io_supply;	/* will be set to 1.8 V */
+	const char 	*core_supply;	/* will be set to 2.8 V */
+};
+
+#endif /* _INCLUDE_LINUX_SPI_L4F00242T03_H_ */
diff --git a/include/linux/spinlock.h b/include/linux/spinlock.h
index 86088213334a..89fac6a3f78b 100644
--- a/include/linux/spinlock.h
+++ b/include/linux/spinlock.h
@@ -128,19 +128,21 @@ static inline void smp_mb__after_lock(void) { smp_mb(); }
 #define raw_spin_unlock_wait(lock)	arch_spin_unlock_wait(&(lock)->raw_lock)
 
 #ifdef CONFIG_DEBUG_SPINLOCK
- extern void do_raw_spin_lock(raw_spinlock_t *lock);
+ extern void do_raw_spin_lock(raw_spinlock_t *lock) __acquires(lock);
 #define do_raw_spin_lock_flags(lock, flags) do_raw_spin_lock(lock)
  extern int do_raw_spin_trylock(raw_spinlock_t *lock);
- extern void do_raw_spin_unlock(raw_spinlock_t *lock);
+ extern void do_raw_spin_unlock(raw_spinlock_t *lock) __releases(lock);
 #else
-static inline void do_raw_spin_lock(raw_spinlock_t *lock)
+static inline void do_raw_spin_lock(raw_spinlock_t *lock) __acquires(lock)
 {
+	__acquire(lock);
 	arch_spin_lock(&lock->raw_lock);
 }
 
 static inline void
-do_raw_spin_lock_flags(raw_spinlock_t *lock, unsigned long *flags)
+do_raw_spin_lock_flags(raw_spinlock_t *lock, unsigned long *flags) __acquires(lock)
 {
+	__acquire(lock);
 	arch_spin_lock_flags(&lock->raw_lock, *flags);
 }
 
@@ -149,9 +151,10 @@ static inline int do_raw_spin_trylock(raw_spinlock_t *lock)
 	return arch_spin_trylock(&(lock)->raw_lock);
 }
 
-static inline void do_raw_spin_unlock(raw_spinlock_t *lock)
+static inline void do_raw_spin_unlock(raw_spinlock_t *lock) __releases(lock)
 {
 	arch_spin_unlock(&lock->raw_lock);
+	__release(lock);
 }
 #endif
 
diff --git a/include/linux/swap.h b/include/linux/swap.h
index a2602a8207a6..1f59d9340c4d 100644
--- a/include/linux/swap.h
+++ b/include/linux/swap.h
@@ -355,6 +355,7 @@ static inline void disable_swap_token(void)
 #ifdef CONFIG_CGROUP_MEM_RES_CTLR
 extern void
 mem_cgroup_uncharge_swapcache(struct page *page, swp_entry_t ent, bool swapout);
+extern int mem_cgroup_count_swap_user(swp_entry_t ent, struct page **pagep);
 #else
 static inline void
 mem_cgroup_uncharge_swapcache(struct page *page, swp_entry_t ent, bool swapout)
@@ -485,6 +486,14 @@ mem_cgroup_uncharge_swapcache(struct page *page, swp_entry_t ent)
 {
 }
 
+#ifdef CONFIG_CGROUP_MEM_RES_CTLR
+static inline int
+mem_cgroup_count_swap_user(swp_entry_t ent, struct page **pagep)
+{
+	return 0;
+}
+#endif
+
 #endif /* CONFIG_SWAP */
 #endif /* __KERNEL__*/
 #endif /* _LINUX_SWAP_H */
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 8126f239edf0..f994ae58a002 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -23,6 +23,7 @@ struct kexec_segment;
 struct linux_dirent;
 struct linux_dirent64;
 struct list_head;
+struct mmap_arg_struct;
 struct msgbuf;
 struct msghdr;
 struct mmsghdr;
@@ -30,10 +31,13 @@ struct msqid_ds;
 struct new_utsname;
 struct nfsctl_arg;
 struct __old_kernel_stat;
+struct oldold_utsname;
+struct old_utsname;
 struct pollfd;
 struct rlimit;
 struct rusage;
 struct sched_param;
+struct sel_arg_struct;
 struct semaphore;
 struct sembuf;
 struct shmid_ds;
@@ -101,18 +105,18 @@ struct perf_event_attr;
 
 #ifdef CONFIG_PERF_EVENTS
 
-#define TRACE_SYS_ENTER_PROFILE_INIT(sname)				       \
-	.profile_enable = prof_sysenter_enable,				       \
-	.profile_disable = prof_sysenter_disable,
+#define TRACE_SYS_ENTER_PERF_INIT(sname)				       \
+	.perf_event_enable = perf_sysenter_enable,			       \
+	.perf_event_disable = perf_sysenter_disable,
 
-#define TRACE_SYS_EXIT_PROFILE_INIT(sname)				       \
-	.profile_enable = prof_sysexit_enable,				       \
-	.profile_disable = prof_sysexit_disable,
+#define TRACE_SYS_EXIT_PERF_INIT(sname)					       \
+	.perf_event_enable = perf_sysexit_enable,			       \
+	.perf_event_disable = perf_sysexit_disable,
 #else
-#define TRACE_SYS_ENTER_PROFILE(sname)
-#define TRACE_SYS_ENTER_PROFILE_INIT(sname)
-#define TRACE_SYS_EXIT_PROFILE(sname)
-#define TRACE_SYS_EXIT_PROFILE_INIT(sname)
+#define TRACE_SYS_ENTER_PERF(sname)
+#define TRACE_SYS_ENTER_PERF_INIT(sname)
+#define TRACE_SYS_EXIT_PERF(sname)
+#define TRACE_SYS_EXIT_PERF_INIT(sname)
 #endif /* CONFIG_PERF_EVENTS */
 
 #ifdef CONFIG_FTRACE_SYSCALLS
@@ -149,7 +153,7 @@ struct perf_event_attr;
 		.regfunc		= reg_event_syscall_enter,	\
 		.unregfunc		= unreg_event_syscall_enter,	\
 		.data			= (void *)&__syscall_meta_##sname,\
-		TRACE_SYS_ENTER_PROFILE_INIT(sname)			\
+		TRACE_SYS_ENTER_PERF_INIT(sname)			\
 	}
 
 #define SYSCALL_TRACE_EXIT_EVENT(sname)					\
@@ -171,7 +175,7 @@ struct perf_event_attr;
 		.regfunc		= reg_event_syscall_exit,	\
 		.unregfunc		= unreg_event_syscall_exit,	\
 		.data			= (void *)&__syscall_meta_##sname,\
-		TRACE_SYS_EXIT_PROFILE_INIT(sname)			\
+		TRACE_SYS_EXIT_PERF_INIT(sname)			\
 	}
 
 #define SYSCALL_METADATA(sname, nb)				\
@@ -638,6 +642,7 @@ asmlinkage long sys_poll(struct pollfd __user *ufds, unsigned int nfds,
 				long timeout);
 asmlinkage long sys_select(int n, fd_set __user *inp, fd_set __user *outp,
 			fd_set __user *exp, struct timeval __user *tvp);
+asmlinkage long sys_old_select(struct sel_arg_struct __user *arg);
 asmlinkage long sys_epoll_create(int size);
 asmlinkage long sys_epoll_create1(int flags);
 asmlinkage long sys_epoll_ctl(int epfd, int op, int fd,
@@ -652,6 +657,8 @@ asmlinkage long sys_gethostname(char __user *name, int len);
 asmlinkage long sys_sethostname(char __user *name, int len);
 asmlinkage long sys_setdomainname(char __user *name, int len);
 asmlinkage long sys_newuname(struct new_utsname __user *name);
+asmlinkage long sys_uname(struct old_utsname __user *);
+asmlinkage long sys_olduname(struct oldold_utsname __user *);
 
 asmlinkage long sys_getrlimit(unsigned int resource,
 				struct rlimit __user *rlim);
@@ -681,6 +688,8 @@ asmlinkage long sys_shmat(int shmid, char __user *shmaddr, int shmflg);
 asmlinkage long sys_shmget(key_t key, size_t size, int flag);
 asmlinkage long sys_shmdt(char __user *shmaddr);
 asmlinkage long sys_shmctl(int shmid, int cmd, struct shmid_ds __user *buf);
+asmlinkage long sys_ipc(unsigned int call, int first, int second,
+		unsigned long third, void __user *ptr, long fifth);
 
 asmlinkage long sys_mq_open(const char __user *name, int oflag, mode_t mode, struct mq_attr __user *attr);
 asmlinkage long sys_mq_unlink(const char __user *name);
@@ -836,4 +845,6 @@ asmlinkage long sys_perf_event_open(
 asmlinkage long sys_mmap_pgoff(unsigned long addr, unsigned long len,
 			unsigned long prot, unsigned long flags,
 			unsigned long fd, unsigned long pgoff);
+asmlinkage long sys_old_mmap(struct mmap_arg_struct __user *arg);
+
 #endif
diff --git a/include/linux/sysdev.h b/include/linux/sysdev.h
index f395bb3fa2f2..1154c29f4101 100644
--- a/include/linux/sysdev.h
+++ b/include/linux/sysdev.h
@@ -27,10 +27,12 @@
 
 
 struct sys_device;
+struct sysdev_class_attribute;
 
 struct sysdev_class {
 	const char *name;
 	struct list_head	drivers;
+	struct sysdev_class_attribute **attrs;
 
 	/* Default operations for these types of devices */
 	int	(*shutdown)(struct sys_device *);
@@ -41,8 +43,10 @@ struct sysdev_class {
 
 struct sysdev_class_attribute {
 	struct attribute attr;
-	ssize_t (*show)(struct sysdev_class *, char *);
-	ssize_t (*store)(struct sysdev_class *, const char *, size_t);
+	ssize_t (*show)(struct sysdev_class *, struct sysdev_class_attribute *,
+			char *);
+	ssize_t (*store)(struct sysdev_class *, struct sysdev_class_attribute *,
+			 const char *, size_t);
 };
 
 #define _SYSDEV_CLASS_ATTR(_name,_mode,_show,_store) 		\
@@ -119,6 +123,19 @@ struct sysdev_attribute {
 extern int sysdev_create_file(struct sys_device *, struct sysdev_attribute *);
 extern void sysdev_remove_file(struct sys_device *, struct sysdev_attribute *);
 
+/* Create/remove NULL terminated attribute list */
+static inline int
+sysdev_create_files(struct sys_device *d, struct sysdev_attribute **a)
+{
+	return sysfs_create_files(&d->kobj, (const struct attribute **)a);
+}
+
+static inline void
+sysdev_remove_files(struct sys_device *d, struct sysdev_attribute **a)
+{
+	return sysfs_remove_files(&d->kobj, (const struct attribute **)a);
+}
+
 struct sysdev_ext_attribute {
 	struct sysdev_attribute attr;
 	void *var;
diff --git a/include/linux/sysfs.h b/include/linux/sysfs.h
index cfa83083a2d4..f0496b3d1811 100644
--- a/include/linux/sysfs.h
+++ b/include/linux/sysfs.h
@@ -15,6 +15,7 @@
 #include <linux/compiler.h>
 #include <linux/errno.h>
 #include <linux/list.h>
+#include <linux/lockdep.h>
 #include <asm/atomic.h>
 
 struct kobject;
@@ -29,8 +30,33 @@ struct attribute {
 	const char		*name;
 	struct module		*owner;
 	mode_t			mode;
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+	struct lock_class_key	*key;
+	struct lock_class_key	skey;
+#endif
 };
 
+/**
+ *	sysfs_attr_init - initialize a dynamically allocated sysfs attribute
+ *	@attr: struct attribute to initialize
+ *
+ *	Initialize a dynamically allocated struct attribute so we can
+ *	make lockdep happy.  This is a new requirement for attributes
+ *	and initially this is only needed when lockdep is enabled.
+ *	Lockdep gives a nice error when your attribute is added to
+ *	sysfs if you don't have this.
+ */
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+#define sysfs_attr_init(attr)				\
+do {							\
+	static struct lock_class_key __key;		\
+							\
+	(attr)->key = &__key;				\
+} while(0)
+#else
+#define sysfs_attr_init(attr) do {} while(0)
+#endif
+
 struct attribute_group {
 	const char		*name;
 	mode_t			(*is_visible)(struct kobject *,
@@ -74,6 +100,18 @@ struct bin_attribute {
 		    struct vm_area_struct *vma);
 };
 
+/**
+ *	sysfs_bin_attr_init - initialize a dynamically allocated bin_attribute
+ *	@attr: struct bin_attribute to initialize
+ *
+ *	Initialize a dynamically allocated struct bin_attribute so we
+ *	can make lockdep happy.  This is a new requirement for
+ *	attributes and initially this is only needed when lockdep is
+ *	enabled.  Lockdep gives a nice error when your attribute is
+ *	added to sysfs if you don't have this.
+ */
+#define sysfs_bin_attr_init(bin_attr) sysfs_attr_init(&(bin_attr)->attr)
+
 struct sysfs_ops {
 	ssize_t	(*show)(struct kobject *, struct attribute *,char *);
 	ssize_t	(*store)(struct kobject *,struct attribute *,const char *, size_t);
@@ -94,9 +132,12 @@ int __must_check sysfs_move_dir(struct kobject *kobj,
 
 int __must_check sysfs_create_file(struct kobject *kobj,
 				   const struct attribute *attr);
+int __must_check sysfs_create_files(struct kobject *kobj,
+				   const struct attribute **attr);
 int __must_check sysfs_chmod_file(struct kobject *kobj, struct attribute *attr,
 				  mode_t mode);
 void sysfs_remove_file(struct kobject *kobj, const struct attribute *attr);
+void sysfs_remove_files(struct kobject *kobj, const struct attribute **attr);
 
 int __must_check sysfs_create_bin_file(struct kobject *kobj,
 				       const struct bin_attribute *attr);
@@ -110,6 +151,9 @@ int __must_check sysfs_create_link_nowarn(struct kobject *kobj,
 					  const char *name);
 void sysfs_remove_link(struct kobject *kobj, const char *name);
 
+int sysfs_rename_link(struct kobject *kobj, struct kobject *target,
+			const char *old_name, const char *new_name);
+
 int __must_check sysfs_create_group(struct kobject *kobj,
 				    const struct attribute_group *grp);
 int sysfs_update_group(struct kobject *kobj,
@@ -164,6 +208,12 @@ static inline int sysfs_create_file(struct kobject *kobj,
 	return 0;
 }
 
+static inline int sysfs_create_files(struct kobject *kobj,
+				    const struct attribute **attr)
+{
+	return 0;
+}
+
 static inline int sysfs_chmod_file(struct kobject *kobj,
 				   struct attribute *attr, mode_t mode)
 {
@@ -175,6 +225,11 @@ static inline void sysfs_remove_file(struct kobject *kobj,
 {
 }
 
+static inline void sysfs_remove_files(struct kobject *kobj,
+				     const struct attribute **attr)
+{
+}
+
 static inline int sysfs_create_bin_file(struct kobject *kobj,
 					const struct bin_attribute *attr)
 {
@@ -203,6 +258,12 @@ static inline void sysfs_remove_link(struct kobject *kobj, const char *name)
 {
 }
 
+static inline int sysfs_rename_link(struct kobject *k, struct kobject *t,
+				    const char *old_name, const char *new_name)
+{
+	return 0;
+}
+
 static inline int sysfs_create_group(struct kobject *kobj,
 				     const struct attribute_group *grp)
 {
diff --git a/include/linux/taskstats_kern.h b/include/linux/taskstats_kern.h
index 3398f4553269..b6523c1427ce 100644
--- a/include/linux/taskstats_kern.h
+++ b/include/linux/taskstats_kern.h
@@ -14,11 +14,6 @@
 extern struct kmem_cache *taskstats_cache;
 extern struct mutex taskstats_exit_mutex;
 
-static inline void taskstats_tgid_init(struct signal_struct *sig)
-{
-	sig->stats = NULL;
-}
-
 static inline void taskstats_tgid_free(struct signal_struct *sig)
 {
 	if (sig->stats)
@@ -30,8 +25,6 @@ extern void taskstats_init_early(void);
 #else
 static inline void taskstats_exit(struct task_struct *tsk, int group_dead)
 {}
-static inline void taskstats_tgid_init(struct signal_struct *sig)
-{}
 static inline void taskstats_tgid_free(struct signal_struct *sig)
 {}
 static inline void taskstats_init_early(void)
diff --git a/include/linux/tty.h b/include/linux/tty.h
index d96e5882f129..4409967db0c4 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -70,12 +70,13 @@ struct tty_buffer {
 
 /*
  * We default to dicing tty buffer allocations to this many characters
- * in order to avoid multiple page allocations. We assume tty_buffer itself
- * is under 256 bytes. See tty_buffer_find for the allocation logic this
- * must match
+ * in order to avoid multiple page allocations. We know the size of
+ * tty_buffer itself but it must also be taken into account that the
+ * the buffer is 256 byte aligned. See tty_buffer_find for the allocation
+ * logic this must match
  */
 
-#define TTY_BUFFER_PAGE		((PAGE_SIZE  - 256) / 2)
+#define TTY_BUFFER_PAGE	(((PAGE_SIZE - sizeof(struct tty_buffer)) / 2) & ~0xFF)
 
 
 struct tty_bufhead {
@@ -223,6 +224,7 @@ struct tty_port {
 	wait_queue_head_t	close_wait;	/* Close waiters */
 	wait_queue_head_t	delta_msr_wait;	/* Modem status change */
 	unsigned long		flags;		/* TTY flags ASY_*/
+	unsigned char		console:1;	/* port is a console */
 	struct mutex		mutex;		/* Locking */
 	struct mutex		buf_mutex;	/* Buffer alloc lock */
 	unsigned char		*xmit_buf;	/* Optional buffer */
@@ -514,6 +516,7 @@ extern void tty_ldisc_enable(struct tty_struct *tty);
 
 /* n_tty.c */
 extern struct tty_ldisc_ops tty_ldisc_N_TTY;
+extern void n_tty_inherit_ops(struct tty_ldisc_ops *ops);
 
 /* tty_audit.c */
 #ifdef CONFIG_AUDIT
diff --git a/include/linux/tty_ldisc.h b/include/linux/tty_ldisc.h
index 0c4ee9b88f85..526d66f066a3 100644
--- a/include/linux/tty_ldisc.h
+++ b/include/linux/tty_ldisc.h
@@ -99,6 +99,12 @@
  *	cease I/O to the tty driver. Can sleep. The driver should
  *	seek to perform this action quickly but should wait until
  *	any pending driver I/O is completed.
+ *
+ * void (*dcd_change)(struct tty_struct *tty, unsigned int status,
+ * 			struct timespec *ts)
+ *
+ *	Tells the discipline that the DCD pin has changed its status and
+ *	the relative timestamp. Pointer ts can be NULL.
  */
 
 #include <linux/fs.h>
@@ -136,6 +142,8 @@ struct tty_ldisc_ops {
 	void	(*receive_buf)(struct tty_struct *, const unsigned char *cp,
 			       char *fp, int count);
 	void	(*write_wakeup)(struct tty_struct *);
+	void	(*dcd_change)(struct tty_struct *, unsigned int,
+				struct timespec *);
 
 	struct  module *owner;
 	
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 3492abf82e75..ce1323c4e47c 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -512,9 +512,9 @@ extern struct usb_device *usb_get_dev(struct usb_device *dev);
 extern void usb_put_dev(struct usb_device *dev);
 
 /* USB device locking */
-#define usb_lock_device(udev)		down(&(udev)->dev.sem)
-#define usb_unlock_device(udev)		up(&(udev)->dev.sem)
-#define usb_trylock_device(udev)	down_trylock(&(udev)->dev.sem)
+#define usb_lock_device(udev)		device_lock(&(udev)->dev)
+#define usb_unlock_device(udev)		device_unlock(&(udev)->dev)
+#define usb_trylock_device(udev)	device_trylock(&(udev)->dev)
 extern int usb_lock_device_for_reset(struct usb_device *udev,
 				     const struct usb_interface *iface);
 
@@ -1055,7 +1055,8 @@ typedef void (*usb_complete_t)(struct urb *);
  * @number_of_packets: Lists the number of ISO transfer buffers.
  * @interval: Specifies the polling interval for interrupt or isochronous
  *	transfers.  The units are frames (milliseconds) for full and low
- *	speed devices, and microframes (1/8 millisecond) for highspeed ones.
+ *	speed devices, and microframes (1/8 millisecond) for highspeed
+ *	and SuperSpeed devices.
  * @error_count: Returns the number of ISO transfers that reported errors.
  * @context: For use in completion functions.  This normally points to
  *	request-specific driver context.
@@ -1286,9 +1287,16 @@ static inline void usb_fill_bulk_urb(struct urb *urb,
  *
  * Initializes a interrupt urb with the proper information needed to submit
  * it to a device.
- * Note that high speed interrupt endpoints use a logarithmic encoding of
- * the endpoint interval, and express polling intervals in microframes
- * (eight per millisecond) rather than in frames (one per millisecond).
+ *
+ * Note that High Speed and SuperSpeed interrupt endpoints use a logarithmic
+ * encoding of the endpoint interval, and express polling intervals in
+ * microframes (eight per millisecond) rather than in frames (one per
+ * millisecond).
+ *
+ * Wireless USB also uses the logarithmic encoding, but specifies it in units of
+ * 128us instead of 125us.  For Wireless USB devices, the interval is passed
+ * through to the host controller, rather than being translated into microframe
+ * units.
  */
 static inline void usb_fill_int_urb(struct urb *urb,
 				    struct usb_device *dev,
@@ -1305,7 +1313,7 @@ static inline void usb_fill_int_urb(struct urb *urb,
 	urb->transfer_buffer_length = buffer_length;
 	urb->complete = complete_fn;
 	urb->context = context;
-	if (dev->speed == USB_SPEED_HIGH)
+	if (dev->speed == USB_SPEED_HIGH || dev->speed == USB_SPEED_SUPER)
 		urb->interval = 1 << (interval - 1);
 	else
 		urb->interval = interval;
diff --git a/include/linux/usb/audio.h b/include/linux/usb/audio.h
index 6bb293684eb8..4d3e450e2b03 100644
--- a/include/linux/usb/audio.h
+++ b/include/linux/usb/audio.h
@@ -269,8 +269,8 @@ struct uac_format_type_i_ext_descriptor {
 	__u8 bLength;
 	__u8 bDescriptorType;
 	__u8 bDescriptorSubtype;
-	__u8 bSubslotSize;
 	__u8 bFormatType;
+	__u8 bSubslotSize;
 	__u8 bBitResolution;
 	__u8 bHeaderLength;
 	__u8 bControlSize;
diff --git a/include/linux/virtio.h b/include/linux/virtio.h
index f508c651e53d..40d1709bdbf4 100644
--- a/include/linux/virtio.h
+++ b/include/linux/virtio.h
@@ -98,6 +98,7 @@ struct virtio_device {
 	void *priv;
 };
 
+#define dev_to_virtio(dev) container_of(dev, struct virtio_device, dev)
 int register_virtio_device(struct virtio_device *dev);
 void unregister_virtio_device(struct virtio_device *dev);
 
diff --git a/include/linux/virtio_9p.h b/include/linux/virtio_9p.h
index 332275080083..5cf11765146b 100644
--- a/include/linux/virtio_9p.h
+++ b/include/linux/virtio_9p.h
@@ -5,4 +5,16 @@
 #include <linux/virtio_ids.h>
 #include <linux/virtio_config.h>
 
+/* The feature bitmap for virtio 9P */
+
+/* The mount point is specified in a config variable */
+#define VIRTIO_9P_MOUNT_TAG 0
+
+struct virtio_9p_config {
+	/* length of the tag name */
+	__u16 tag_len;
+	/* non-NULL terminated tag name */
+	__u8 tag[0];
+} __attribute__((packed));
+
 #endif /* _LINUX_VIRTIO_9P_H */
diff --git a/include/linux/vt.h b/include/linux/vt.h
index 778b7b2a47d4..d5dd0bc408fd 100644
--- a/include/linux/vt.h
+++ b/include/linux/vt.h
@@ -27,7 +27,7 @@ struct vt_mode {
 #define VT_SETMODE	0x5602	/* set mode of active vt */
 #define		VT_AUTO		0x00	/* auto vt switching */
 #define		VT_PROCESS	0x01	/* process controls switching */
-#define		VT_PROCESS_AUTO 0x02	/* process is notified of switching */
+#define		VT_ACKACQ	0x02	/* acknowledge switch */
 
 struct vt_stat {
 	unsigned short v_active;	/* active vt */
@@ -38,7 +38,6 @@ struct vt_stat {
 #define VT_SENDSIG	0x5604	/* signal to send to bitmask of vts */
 
 #define VT_RELDISP	0x5605	/* release display */
-#define		VT_ACKACQ	0x02	/* acknowledge switch */
 
 #define VT_ACTIVATE	0x5606	/* make vt active */
 #define VT_WAITACTIVE	0x5607	/* wait for vt active */
diff --git a/include/math-emu/op-common.h b/include/math-emu/op-common.h
index f456534dcaf9..fd882261225e 100644
--- a/include/math-emu/op-common.h
+++ b/include/math-emu/op-common.h
@@ -29,7 +29,7 @@
   _FP_FRAC_DECL_##wc(X)
 
 /*
- * Finish truely unpacking a native fp value by classifying the kind
+ * Finish truly unpacking a native fp value by classifying the kind
  * of fp value and normalizing both the exponent and the fraction.
  */
 
diff --git a/include/media/davinci/vpfe_capture.h b/include/media/davinci/vpfe_capture.h
index d863e5e8426d..4314a5f6a087 100644
--- a/include/media/davinci/vpfe_capture.h
+++ b/include/media/davinci/vpfe_capture.h
@@ -165,7 +165,7 @@ struct vpfe_device {
 	u8 started;
 	/*
 	 * offset where second field starts from the starting of the
-	 * buffer for field seperated YCbCr formats
+	 * buffer for field separated YCbCr formats
 	 */
 	u32 field_off;
 };
diff --git a/include/net/9p/client.h b/include/net/9p/client.h
index 52e1fff709e4..f076dfa75ae8 100644
--- a/include/net/9p/client.h
+++ b/include/net/9p/client.h
@@ -32,13 +32,13 @@
 /** enum p9_proto_versions - 9P protocol versions
  * @p9_proto_legacy: 9P Legacy mode, pre-9P2000.u
  * @p9_proto_2000u: 9P2000.u extension
- * @p9_proto_2010L: 9P2010.L extension
+ * @p9_proto_2000L: 9P2000.L extension
  */
 
 enum p9_proto_versions{
 	p9_proto_legacy = 0,
 	p9_proto_2000u = 1,
-	p9_proto_2010L = 2,
+	p9_proto_2000L = 2,
 };
 
 
diff --git a/include/net/ip6_route.h b/include/net/ip6_route.h
index 4a808de7c0f6..68f67836e146 100644
--- a/include/net/ip6_route.h
+++ b/include/net/ip6_route.h
@@ -37,6 +37,24 @@ struct route_info {
 #define RT6_LOOKUP_F_SRCPREF_PUBLIC	0x00000010
 #define RT6_LOOKUP_F_SRCPREF_COA	0x00000020
 
+/*
+ * rt6_srcprefs2flags() and rt6_flags2srcprefs() translate
+ * between IPV6_ADDR_PREFERENCES socket option values
+ *	IPV6_PREFER_SRC_TMP    = 0x1
+ *	IPV6_PREFER_SRC_PUBLIC = 0x2
+ *	IPV6_PREFER_SRC_COA    = 0x4
+ * and above RT6_LOOKUP_F_SRCPREF_xxx flags.
+ */
+static inline int rt6_srcprefs2flags(unsigned int srcprefs)
+{
+	/* No need to bitmask because srcprefs have only 3 bits. */
+	return srcprefs << 3;
+}
+
+static inline unsigned int rt6_flags2srcprefs(int flags)
+{
+	return (flags >> 3) & 7;
+}
 
 extern void			ip6_route_input(struct sk_buff *skb);
 
diff --git a/include/net/ip6_tunnel.h b/include/net/ip6_tunnel.h
index 83b4e008b16d..fbf9d1cda27b 100644
--- a/include/net/ip6_tunnel.h
+++ b/include/net/ip6_tunnel.h
@@ -15,7 +15,6 @@
 struct ip6_tnl {
 	struct ip6_tnl *next;	/* next tunnel in list */
 	struct net_device *dev;	/* virtual device associated with tunnel */
-	int recursion;		/* depth of hard_start_xmit recursion */
 	struct ip6_tnl_parm parms;	/* tunnel configuration parameters */
 	struct flowi fl;	/* flowi template for xmit */
 	struct dst_entry *dst_cache;    /* cached dst */
diff --git a/include/net/irda/irttp.h b/include/net/irda/irttp.h
index 0788c23d2828..11aee7a2972a 100644
--- a/include/net/irda/irttp.h
+++ b/include/net/irda/irttp.h
@@ -97,7 +97,7 @@
 #define TTP_MAX_SDU_SIZE 0x01
 
 /*
- *  This structure contains all data assosiated with one instance of a TTP 
+ *  This structure contains all data associated with one instance of a TTP 
  *  connection.
  */
 struct tsap_cb {
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 80eb7cc42ce9..45d7d44d7cbe 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -2426,7 +2426,8 @@ struct rate_control_ops {
 			  struct ieee80211_sta *sta, void *priv_sta);
 	void (*rate_update)(void *priv, struct ieee80211_supported_band *sband,
 			    struct ieee80211_sta *sta,
-			    void *priv_sta, u32 changed);
+			    void *priv_sta, u32 changed,
+			    enum nl80211_channel_type oper_chan_type);
 	void (*free_sta)(void *priv, struct ieee80211_sta *sta,
 			 void *priv_sta);
 
diff --git a/include/net/net_namespace.h b/include/net/net_namespace.h
index 82b7be4db89a..bd10a7908993 100644
--- a/include/net/net_namespace.h
+++ b/include/net/net_namespace.h
@@ -100,14 +100,9 @@ struct net {
 extern struct net init_net;
 
 #ifdef CONFIG_NET
-#define INIT_NET_NS(net_ns) .net_ns = &init_net,
-
 extern struct net *copy_net_ns(unsigned long flags, struct net *net_ns);
 
 #else /* CONFIG_NET */
-
-#define INIT_NET_NS(net_ns)
-
 static inline struct net *copy_net_ns(unsigned long flags, struct net *net_ns)
 {
 	/* There is nothing to copy so this is a noop */
diff --git a/include/net/sock.h b/include/net/sock.h
index 6cb1676e409a..092b0551e77f 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -253,6 +253,8 @@ struct sock {
 	struct {
 		struct sk_buff *head;
 		struct sk_buff *tail;
+		int len;
+		int limit;
 	} sk_backlog;
 	wait_queue_head_t	*sk_sleep;
 	struct dst_entry	*sk_dst_cache;
@@ -589,8 +591,8 @@ static inline int sk_stream_memory_free(struct sock *sk)
 	return sk->sk_wmem_queued < sk->sk_sndbuf;
 }
 
-/* The per-socket spinlock must be held here. */
-static inline void sk_add_backlog(struct sock *sk, struct sk_buff *skb)
+/* OOB backlog add */
+static inline void __sk_add_backlog(struct sock *sk, struct sk_buff *skb)
 {
 	if (!sk->sk_backlog.tail) {
 		sk->sk_backlog.head = sk->sk_backlog.tail = skb;
@@ -601,6 +603,17 @@ static inline void sk_add_backlog(struct sock *sk, struct sk_buff *skb)
 	skb->next = NULL;
 }
 
+/* The per-socket spinlock must be held here. */
+static inline __must_check int sk_add_backlog(struct sock *sk, struct sk_buff *skb)
+{
+	if (sk->sk_backlog.len >= max(sk->sk_backlog.limit, sk->sk_rcvbuf << 1))
+		return -ENOBUFS;
+
+	__sk_add_backlog(sk, skb);
+	sk->sk_backlog.len += skb->truesize;
+	return 0;
+}
+
 static inline int sk_backlog_rcv(struct sock *sk, struct sk_buff *skb)
 {
 	return sk->sk_backlog_rcv(sk, skb);
diff --git a/include/net/tcp.h b/include/net/tcp.h
index 56f0aec40ed6..75be5a28815d 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -939,7 +939,7 @@ static inline int tcp_prequeue(struct sock *sk, struct sk_buff *skb)
 
 		tp->ucopy.memory = 0;
 	} else if (skb_queue_len(&tp->ucopy.prequeue) == 1) {
-		wake_up_interruptible_poll(sk->sk_sleep,
+		wake_up_interruptible_sync_poll(sk->sk_sleep,
 					   POLLIN | POLLRDNORM | POLLRDBAND);
 		if (!inet_csk_ack_scheduled(sk))
 			inet_csk_reset_xmit_timer(sk, ICSK_TIME_DACK,
diff --git a/include/net/xfrm.h b/include/net/xfrm.h
index a7df3275b860..d74e080ba6c9 100644
--- a/include/net/xfrm.h
+++ b/include/net/xfrm.h
@@ -275,7 +275,8 @@ struct xfrm_policy_afinfo {
 					     struct dst_entry *dst,
 					     int nfheader_len);
 	int			(*fill_dst)(struct xfrm_dst *xdst,
-					    struct net_device *dev);
+					    struct net_device *dev,
+					    struct flowi *fl);
 };
 
 extern int xfrm_policy_register_afinfo(struct xfrm_policy_afinfo *afinfo);
diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h
index ff92b46f5153..ae5196aae1a5 100644
--- a/include/scsi/libiscsi.h
+++ b/include/scsi/libiscsi.h
@@ -338,7 +338,8 @@ struct iscsi_host {
 extern int iscsi_change_queue_depth(struct scsi_device *sdev, int depth,
 				    int reason);
 extern int iscsi_eh_abort(struct scsi_cmnd *sc);
-extern int iscsi_eh_target_reset(struct scsi_cmnd *sc);
+extern int iscsi_eh_recover_target(struct scsi_cmnd *sc);
+extern int iscsi_eh_session_reset(struct scsi_cmnd *sc);
 extern int iscsi_eh_device_reset(struct scsi_cmnd *sc);
 extern int iscsi_queuecommand(struct scsi_cmnd *sc,
 			      void (*done)(struct scsi_cmnd *));
diff --git a/include/scsi/sg.h b/include/scsi/sg.h
index 934ae389671d..a9f3c6fc3f57 100644
--- a/include/scsi/sg.h
+++ b/include/scsi/sg.h
@@ -70,6 +70,9 @@ Major new features in SG 3.x driver (cf SG 2.x drivers)
  (for the lk 2.2 series).
 */
 
+#ifdef __KERNEL__
+extern int sg_big_buff; /* for sysctl */
+#endif
 
 /* New interface introduced in the 3.x SG drivers follows */
 
diff --git a/include/sound/asound.h b/include/sound/asound.h
index 1f57bb92eb5a..098595500632 100644
--- a/include/sound/asound.h
+++ b/include/sound/asound.h
@@ -544,7 +544,7 @@ struct snd_rawmidi_status {
  *  Timer section - /dev/snd/timer
  */
 
-#define SNDRV_TIMER_VERSION		SNDRV_PROTOCOL_VERSION(2, 0, 5)
+#define SNDRV_TIMER_VERSION		SNDRV_PROTOCOL_VERSION(2, 0, 6)
 
 enum {
 	SNDRV_TIMER_CLASS_NONE = -1,
diff --git a/include/trace/ftrace.h b/include/trace/ftrace.h
index 0804cd594803..ea6f9d4a20e9 100644
--- a/include/trace/ftrace.h
+++ b/include/trace/ftrace.h
@@ -401,18 +401,18 @@ static inline notrace int ftrace_get_offsets_##call(			\
 #undef DEFINE_EVENT
 #define DEFINE_EVENT(template, name, proto, args)			\
 									\
-static void ftrace_profile_##name(proto);				\
+static void perf_trace_##name(proto);					\
 									\
 static notrace int							\
-ftrace_profile_enable_##name(struct ftrace_event_call *unused)		\
+perf_trace_enable_##name(struct ftrace_event_call *unused)		\
 {									\
-	return register_trace_##name(ftrace_profile_##name);		\
+	return register_trace_##name(perf_trace_##name);		\
 }									\
 									\
 static notrace void							\
-ftrace_profile_disable_##name(struct ftrace_event_call *unused)		\
+perf_trace_disable_##name(struct ftrace_event_call *unused)		\
 {									\
-	unregister_trace_##name(ftrace_profile_##name);			\
+	unregister_trace_##name(perf_trace_##name);			\
 }
 
 #undef DEFINE_EVENT_PRINT
@@ -507,12 +507,12 @@ ftrace_profile_disable_##name(struct ftrace_event_call *unused)		\
 
 #ifdef CONFIG_PERF_EVENTS
 
-#define _TRACE_PROFILE_INIT(call)					\
-	.profile_enable = ftrace_profile_enable_##call,			\
-	.profile_disable = ftrace_profile_disable_##call,
+#define _TRACE_PERF_INIT(call)						\
+	.perf_event_enable = perf_trace_enable_##call,			\
+	.perf_event_disable = perf_trace_disable_##call,
 
 #else
-#define _TRACE_PROFILE_INIT(call)
+#define _TRACE_PERF_INIT(call)
 #endif /* CONFIG_PERF_EVENTS */
 
 #undef __entry
@@ -638,7 +638,7 @@ __attribute__((section("_ftrace_events"))) event_##call = {		\
 	.unregfunc		= ftrace_raw_unreg_event_##call,	\
 	.print_fmt		= print_fmt_##template,			\
 	.define_fields		= ftrace_define_fields_##template,	\
-	_TRACE_PROFILE_INIT(call)					\
+	_TRACE_PERF_INIT(call)					\
 }
 
 #undef DEFINE_EVENT_PRINT
@@ -657,18 +657,18 @@ __attribute__((section("_ftrace_events"))) event_##call = {		\
 	.unregfunc		= ftrace_raw_unreg_event_##call,	\
 	.print_fmt		= print_fmt_##call,			\
 	.define_fields		= ftrace_define_fields_##template,	\
-	_TRACE_PROFILE_INIT(call)					\
+	_TRACE_PERF_INIT(call)					\
 }
 
 #include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
 
 /*
- * Define the insertion callback to profile events
+ * Define the insertion callback to perf events
  *
  * The job is very similar to ftrace_raw_event_<call> except that we don't
  * insert in the ring buffer but in a perf counter.
  *
- * static void ftrace_profile_<call>(proto)
+ * static void ftrace_perf_<call>(proto)
  * {
  *	struct ftrace_data_offsets_<call> __maybe_unused __data_offsets;
  *	struct ftrace_event_call *event_call = &event_<call>;
@@ -699,9 +699,9 @@ __attribute__((section("_ftrace_events"))) event_##call = {		\
  *	__cpu = smp_processor_id();
  *
  *	if (in_nmi())
- *		trace_buf = rcu_dereference(perf_trace_buf_nmi);
+ *		trace_buf = rcu_dereference_sched(perf_trace_buf_nmi);
  *	else
- *		trace_buf = rcu_dereference(perf_trace_buf);
+ *		trace_buf = rcu_dereference_sched(perf_trace_buf);
  *
  *	if (!trace_buf)
  *		goto end;
@@ -757,13 +757,14 @@ __attribute__((section("_ftrace_events"))) event_##call = {		\
 #undef DECLARE_EVENT_CLASS
 #define DECLARE_EVENT_CLASS(call, proto, args, tstruct, assign, print)	\
 static notrace void							\
-ftrace_profile_templ_##call(struct ftrace_event_call *event_call,	\
+perf_trace_templ_##call(struct ftrace_event_call *event_call,		\
 			    proto)					\
 {									\
 	struct ftrace_data_offsets_##call __maybe_unused __data_offsets;\
 	struct ftrace_raw_##call *entry;				\
 	u64 __addr = 0, __count = 1;					\
 	unsigned long irq_flags;					\
+	struct pt_regs *__regs;						\
 	int __entry_size;						\
 	int __data_size;						\
 	int rctx;							\
@@ -773,10 +774,10 @@ ftrace_profile_templ_##call(struct ftrace_event_call *event_call,	\
 			     sizeof(u64));				\
 	__entry_size -= sizeof(u32);					\
 									\
-	if (WARN_ONCE(__entry_size > FTRACE_MAX_PROFILE_SIZE,		\
+	if (WARN_ONCE(__entry_size > PERF_MAX_TRACE_SIZE,		\
 		      "profile buffer not large enough"))		\
 		return;							\
-	entry = (struct ftrace_raw_##call *)ftrace_perf_buf_prepare(	\
+	entry = (struct ftrace_raw_##call *)perf_trace_buf_prepare(	\
 		__entry_size, event_call->id, &rctx, &irq_flags);	\
 	if (!entry)							\
 		return;							\
@@ -784,17 +785,20 @@ ftrace_profile_templ_##call(struct ftrace_event_call *event_call,	\
 									\
 	{ assign; }							\
 									\
-	ftrace_perf_buf_submit(entry, __entry_size, rctx, __addr,	\
-			       __count, irq_flags);			\
+	__regs = &__get_cpu_var(perf_trace_regs);			\
+	perf_fetch_caller_regs(__regs, 2);				\
+									\
+	perf_trace_buf_submit(entry, __entry_size, rctx, __addr,	\
+			       __count, irq_flags, __regs);		\
 }
 
 #undef DEFINE_EVENT
 #define DEFINE_EVENT(template, call, proto, args)		\
-static notrace void ftrace_profile_##call(proto)		\
+static notrace void perf_trace_##call(proto)			\
 {								\
 	struct ftrace_event_call *event_call = &event_##call;	\
 								\
-	ftrace_profile_templ_##template(event_call, args);	\
+	perf_trace_templ_##template(event_call, args);		\
 }
 
 #undef DEFINE_EVENT_PRINT
diff --git a/include/trace/syscall.h b/include/trace/syscall.h
index 0387100752f0..e5e5f48dbfb3 100644
--- a/include/trace/syscall.h
+++ b/include/trace/syscall.h
@@ -47,10 +47,10 @@ enum print_line_t print_syscall_exit(struct trace_iterator *iter, int flags);
 #endif
 
 #ifdef CONFIG_PERF_EVENTS
-int prof_sysenter_enable(struct ftrace_event_call *call);
-void prof_sysenter_disable(struct ftrace_event_call *call);
-int prof_sysexit_enable(struct ftrace_event_call *call);
-void prof_sysexit_disable(struct ftrace_event_call *call);
+int perf_sysenter_enable(struct ftrace_event_call *call);
+void perf_sysenter_disable(struct ftrace_event_call *call);
+int perf_sysexit_enable(struct ftrace_event_call *call);
+void perf_sysexit_disable(struct ftrace_event_call *call);
 #endif
 
 #endif /* _TRACE_SYSCALL_H */
diff --git a/include/video/broadsheetfb.h b/include/video/broadsheetfb.h
index a758534c0272..548d28f4ec67 100644
--- a/include/video/broadsheetfb.h
+++ b/include/video/broadsheetfb.h
@@ -29,11 +29,19 @@
 #define BS_CMD_UPD_FULL		0x33
 #define BS_CMD_UPD_GDRV_CLR	0x37
 
+/* Broadsheet register interface defines */
+#define BS_REG_REV		0x00
+#define BS_REG_PRC		0x02
+
 /* Broadsheet pin interface specific defines */
 #define BS_CS	0x01
 #define BS_DC 	0x02
 #define BS_WR 	0x03
 
+/* Broadsheet IO interface specific defines */
+#define BS_MMIO_CMD	0x01
+#define BS_MMIO_DATA	0x02
+
 /* struct used by broadsheet. board specific stuff comes from *board */
 struct broadsheetfb_par {
 	struct fb_info *info;
@@ -41,6 +49,8 @@ struct broadsheetfb_par {
 	void (*write_reg)(struct broadsheetfb_par *, u16 reg, u16 val);
 	u16 (*read_reg)(struct broadsheetfb_par *, u16 reg);
 	wait_queue_head_t waitq;
+	int panel_index;
+	struct mutex io_lock;
 };
 
 /* board specific routines */
@@ -48,12 +58,17 @@ struct broadsheet_board {
 	struct module *owner;
 	int (*init)(struct broadsheetfb_par *);
 	int (*wait_for_rdy)(struct broadsheetfb_par *);
-	void (*set_ctl)(struct broadsheetfb_par *, unsigned char, u8);
-	void (*set_hdb)(struct broadsheetfb_par *, u16);
-	u16 (*get_hdb)(struct broadsheetfb_par *);
 	void (*cleanup)(struct broadsheetfb_par *);
 	int (*get_panel_type)(void);
 	int (*setup_irq)(struct fb_info *);
-};
 
+	/* Functions for boards that use GPIO */
+	void (*set_ctl)(struct broadsheetfb_par *, unsigned char, u8);
+	void (*set_hdb)(struct broadsheetfb_par *, u16);
+	u16 (*get_hdb)(struct broadsheetfb_par *);
+
+	/* Functions for boards that have specialized MMIO */
+	void (*mmio_write)(struct broadsheetfb_par *, int type, u16);
+	u16 (*mmio_read)(struct broadsheetfb_par *);
+};
 #endif
diff --git a/init/Kconfig b/init/Kconfig
index 089a230e5652..eb77e8ccde1c 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -463,6 +463,7 @@ config HAVE_UNSTABLE_SCHED_CLOCK
 
 menuconfig CGROUPS
 	boolean "Control Group support"
+	depends on EVENTFD
 	help
 	  This option adds support for grouping sets of processes together, for
 	  use with process control subsystems such as Cpusets, CFS, memory
diff --git a/ipc/Makefile b/ipc/Makefile
index 4e1955ea815d..9075e172e52c 100644
--- a/ipc/Makefile
+++ b/ipc/Makefile
@@ -3,7 +3,7 @@
 #
 
 obj-$(CONFIG_SYSVIPC_COMPAT) += compat.o
-obj-$(CONFIG_SYSVIPC) += util.o msgutil.o msg.o sem.o shm.o ipcns_notifier.o
+obj-$(CONFIG_SYSVIPC) += util.o msgutil.o msg.o sem.o shm.o ipcns_notifier.o syscall.o
 obj-$(CONFIG_SYSVIPC_SYSCTL) += ipc_sysctl.o
 obj_mq-$(CONFIG_COMPAT) += compat_mq.o
 obj-$(CONFIG_POSIX_MQUEUE) += mqueue.o msgutil.o $(obj_mq-y)
diff --git a/ipc/mqueue.c b/ipc/mqueue.c
index b6cb06451f4b..e4e3f04803ca 100644
--- a/ipc/mqueue.c
+++ b/ipc/mqueue.c
@@ -155,7 +155,7 @@ static struct inode *mqueue_get_inode(struct super_block *sb,
 			spin_lock(&mq_lock);
 			if (u->mq_bytes + mq_bytes < u->mq_bytes ||
 		 	    u->mq_bytes + mq_bytes >
-			    p->signal->rlim[RLIMIT_MSGQUEUE].rlim_cur) {
+			    task_rlimit(p, RLIMIT_MSGQUEUE)) {
 				spin_unlock(&mq_lock);
 				kfree(info->messages);
 				goto out_inode;
diff --git a/ipc/shm.c b/ipc/shm.c
index 23256b855819..1a314c89f93c 100644
--- a/ipc/shm.c
+++ b/ipc/shm.c
@@ -764,8 +764,7 @@ SYSCALL_DEFINE3(shmctl, int, shmid, int, cmd, struct shmid_ds __user *, buf)
 			if (euid != shp->shm_perm.uid &&
 			    euid != shp->shm_perm.cuid)
 				goto out_unlock;
-			if (cmd == SHM_LOCK &&
-			    !current->signal->rlim[RLIMIT_MEMLOCK].rlim_cur)
+			if (cmd == SHM_LOCK && !rlimit(RLIMIT_MEMLOCK))
 				goto out_unlock;
 		}
 
diff --git a/ipc/syscall.c b/ipc/syscall.c
new file mode 100644
index 000000000000..355a3da9ec73
--- /dev/null
+++ b/ipc/syscall.c
@@ -0,0 +1,99 @@
+/*
+ * sys_ipc() is the old de-multiplexer for the SysV IPC calls.
+ *
+ * This is really horribly ugly, and new architectures should just wire up
+ * the individual syscalls instead.
+ */
+#include <linux/unistd.h>
+
+#ifdef __ARCH_WANT_SYS_IPC
+#include <linux/errno.h>
+#include <linux/ipc.h>
+#include <linux/shm.h>
+#include <linux/syscalls.h>
+#include <linux/uaccess.h>
+
+SYSCALL_DEFINE6(ipc, unsigned int, call, int, first, int, second,
+		unsigned long, third, void __user *, ptr, long, fifth)
+{
+	int version, ret;
+
+	version = call >> 16; /* hack for backward compatibility */
+	call &= 0xffff;
+
+	switch (call) {
+	case SEMOP:
+		return sys_semtimedop(first, (struct sembuf __user *)ptr,
+				      second, NULL);
+	case SEMTIMEDOP:
+		return sys_semtimedop(first, (struct sembuf __user *)ptr,
+				      second,
+				      (const struct timespec __user *)fifth);
+
+	case SEMGET:
+		return sys_semget(first, second, third);
+	case SEMCTL: {
+		union semun fourth;
+		if (!ptr)
+			return -EINVAL;
+		if (get_user(fourth.__pad, (void __user * __user *) ptr))
+			return -EFAULT;
+		return sys_semctl(first, second, third, fourth);
+	}
+
+	case MSGSND:
+		return sys_msgsnd(first, (struct msgbuf __user *) ptr,
+				  second, third);
+	case MSGRCV:
+		switch (version) {
+		case 0: {
+			struct ipc_kludge tmp;
+			if (!ptr)
+				return -EINVAL;
+
+			if (copy_from_user(&tmp,
+					   (struct ipc_kludge __user *) ptr,
+					   sizeof(tmp)))
+				return -EFAULT;
+			return sys_msgrcv(first, tmp.msgp, second,
+					   tmp.msgtyp, third);
+		}
+		default:
+			return sys_msgrcv(first,
+					   (struct msgbuf __user *) ptr,
+					   second, fifth, third);
+		}
+	case MSGGET:
+		return sys_msgget((key_t) first, second);
+	case MSGCTL:
+		return sys_msgctl(first, second, (struct msqid_ds __user *)ptr);
+
+	case SHMAT:
+		switch (version) {
+		default: {
+			unsigned long raddr;
+			ret = do_shmat(first, (char __user *)ptr,
+				       second, &raddr);
+			if (ret)
+				return ret;
+			return put_user(raddr, (unsigned long __user *) third);
+		}
+		case 1:
+			/*
+			 * This was the entry point for kernel-originating calls
+			 * from iBCS2 in 2.2 days.
+			 */
+			return -EINVAL;
+		}
+	case SHMDT:
+		return sys_shmdt((char __user *)ptr);
+	case SHMGET:
+		return sys_shmget(first, second, third);
+	case SHMCTL:
+		return sys_shmctl(first, second,
+				   (struct shmid_ds __user *) ptr);
+	default:
+		return -ENOSYS;
+	}
+}
+#endif
diff --git a/kernel/acct.c b/kernel/acct.c
index a6605ca921b6..24f8c81fc48d 100644
--- a/kernel/acct.c
+++ b/kernel/acct.c
@@ -588,16 +588,6 @@ out:
 }
 
 /**
- * acct_init_pacct - initialize a new pacct_struct
- * @pacct: per-process accounting info struct to initialize
- */
-void acct_init_pacct(struct pacct_struct *pacct)
-{
-	memset(pacct, 0, sizeof(struct pacct_struct));
-	pacct->ac_utime = pacct->ac_stime = cputime_zero;
-}
-
-/**
  * acct_collect - collect accounting information into pacct_struct
  * @exitcode: task exit code
  * @group_dead: not 0, if this thread is the last one in the process.
diff --git a/kernel/audit.c b/kernel/audit.c
index 5feed232be9d..78f7f86aa238 100644
--- a/kernel/audit.c
+++ b/kernel/audit.c
@@ -398,7 +398,7 @@ static void kauditd_send_skb(struct sk_buff *skb)
 	skb_get(skb);
 	err = netlink_unicast(audit_sock, skb, audit_nlk_pid, 0);
 	if (err < 0) {
-		BUG_ON(err != -ECONNREFUSED); /* Shoudn't happen */
+		BUG_ON(err != -ECONNREFUSED); /* Shouldn't happen */
 		printk(KERN_ERR "audit: *NO* daemon at audit_pid=%d\n", audit_pid);
 		audit_log_lost("auditd dissapeared\n");
 		audit_pid = 0;
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 4fd90e129772..ef909a329750 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -4,6 +4,10 @@
  *  Based originally on the cpuset system, extracted by Paul Menage
  *  Copyright (C) 2006 Google, Inc
  *
+ *  Notifications support
+ *  Copyright (C) 2009 Nokia Corporation
+ *  Author: Kirill A. Shutemov
+ *
  *  Copyright notices from the original cpuset code:
  *  --------------------------------------------------
  *  Copyright (C) 2003 BULL SA.
@@ -44,6 +48,7 @@
 #include <linux/string.h>
 #include <linux/sort.h>
 #include <linux/kmod.h>
+#include <linux/module.h>
 #include <linux/delayacct.h>
 #include <linux/cgroupstats.h>
 #include <linux/hash.h>
@@ -52,15 +57,21 @@
 #include <linux/pid_namespace.h>
 #include <linux/idr.h>
 #include <linux/vmalloc.h> /* TODO: replace with more sophisticated array */
+#include <linux/eventfd.h>
+#include <linux/poll.h>
 
 #include <asm/atomic.h>
 
 static DEFINE_MUTEX(cgroup_mutex);
 
-/* Generate an array of cgroup subsystem pointers */
+/*
+ * Generate an array of cgroup subsystem pointers. At boot time, this is
+ * populated up to CGROUP_BUILTIN_SUBSYS_COUNT, and modular subsystems are
+ * registered after that. The mutable section of this array is protected by
+ * cgroup_mutex.
+ */
 #define SUBSYS(_x) &_x ## _subsys,
-
-static struct cgroup_subsys *subsys[] = {
+static struct cgroup_subsys *subsys[CGROUP_SUBSYS_COUNT] = {
 #include <linux/cgroup_subsys.h>
 };
 
@@ -147,6 +158,35 @@ struct css_id {
 	unsigned short stack[0]; /* Array of Length (depth+1) */
 };
 
+/*
+ * cgroup_event represents events which userspace want to recieve.
+ */
+struct cgroup_event {
+	/*
+	 * Cgroup which the event belongs to.
+	 */
+	struct cgroup *cgrp;
+	/*
+	 * Control file which the event associated.
+	 */
+	struct cftype *cft;
+	/*
+	 * eventfd to signal userspace about the event.
+	 */
+	struct eventfd_ctx *eventfd;
+	/*
+	 * Each of these stored in a list by the cgroup.
+	 */
+	struct list_head list;
+	/*
+	 * All fields below needed to unregister event when
+	 * userspace closes eventfd.
+	 */
+	poll_table pt;
+	wait_queue_head_t *wqh;
+	wait_queue_t wait;
+	struct work_struct remove;
+};
 
 /* The list of hierarchy roots */
 
@@ -250,7 +290,8 @@ struct cg_cgroup_link {
 static struct css_set init_css_set;
 static struct cg_cgroup_link init_css_set_link;
 
-static int cgroup_subsys_init_idr(struct cgroup_subsys *ss);
+static int cgroup_init_idr(struct cgroup_subsys *ss,
+			   struct cgroup_subsys_state *css);
 
 /* css_set_lock protects the list of css_set objects, and the
  * chain of tasks off each css_set.  Nests outside task->alloc_lock
@@ -448,8 +489,11 @@ static struct css_set *find_existing_css_set(
 	struct hlist_node *node;
 	struct css_set *cg;
 
-	/* Built the set of subsystem state objects that we want to
-	 * see in the new css_set */
+	/*
+	 * Build the set of subsystem state objects that we want to see in the
+	 * new css_set. while subsystems can change globally, the entries here
+	 * won't change, so no need for locking.
+	 */
 	for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
 		if (root->subsys_bits & (1UL << i)) {
 			/* Subsystem is in this hierarchy. So we want
@@ -696,6 +740,7 @@ void cgroup_lock(void)
 {
 	mutex_lock(&cgroup_mutex);
 }
+EXPORT_SYMBOL_GPL(cgroup_lock);
 
 /**
  * cgroup_unlock - release lock on cgroup changes
@@ -706,6 +751,7 @@ void cgroup_unlock(void)
 {
 	mutex_unlock(&cgroup_mutex);
 }
+EXPORT_SYMBOL_GPL(cgroup_unlock);
 
 /*
  * A couple of forward declarations required, due to cyclic reference loop:
@@ -757,6 +803,7 @@ static int cgroup_call_pre_destroy(struct cgroup *cgrp)
 			if (ret)
 				break;
 		}
+
 	return ret;
 }
 
@@ -884,7 +931,11 @@ void cgroup_release_and_wakeup_rmdir(struct cgroup_subsys_state *css)
 	css_put(css);
 }
 
-
+/*
+ * Call with cgroup_mutex held. Drops reference counts on modules, including
+ * any duplicate ones that parse_cgroupfs_options took. If this function
+ * returns an error, no reference counts are touched.
+ */
 static int rebind_subsystems(struct cgroupfs_root *root,
 			      unsigned long final_bits)
 {
@@ -892,6 +943,8 @@ static int rebind_subsystems(struct cgroupfs_root *root,
 	struct cgroup *cgrp = &root->top_cgroup;
 	int i;
 
+	BUG_ON(!mutex_is_locked(&cgroup_mutex));
+
 	removed_bits = root->actual_subsys_bits & ~final_bits;
 	added_bits = final_bits & ~root->actual_subsys_bits;
 	/* Check that any added subsystems are currently free */
@@ -900,6 +953,12 @@ static int rebind_subsystems(struct cgroupfs_root *root,
 		struct cgroup_subsys *ss = subsys[i];
 		if (!(bit & added_bits))
 			continue;
+		/*
+		 * Nobody should tell us to do a subsys that doesn't exist:
+		 * parse_cgroupfs_options should catch that case and refcounts
+		 * ensure that subsystems won't disappear once selected.
+		 */
+		BUG_ON(ss == NULL);
 		if (ss->root != &rootnode) {
 			/* Subsystem isn't free */
 			return -EBUSY;
@@ -919,6 +978,7 @@ static int rebind_subsystems(struct cgroupfs_root *root,
 		unsigned long bit = 1UL << i;
 		if (bit & added_bits) {
 			/* We're binding this subsystem to this hierarchy */
+			BUG_ON(ss == NULL);
 			BUG_ON(cgrp->subsys[i]);
 			BUG_ON(!dummytop->subsys[i]);
 			BUG_ON(dummytop->subsys[i]->cgroup != dummytop);
@@ -930,8 +990,10 @@ static int rebind_subsystems(struct cgroupfs_root *root,
 			if (ss->bind)
 				ss->bind(ss, cgrp);
 			mutex_unlock(&ss->hierarchy_mutex);
+			/* refcount was already taken, and we're keeping it */
 		} else if (bit & removed_bits) {
 			/* We're removing this subsystem */
+			BUG_ON(ss == NULL);
 			BUG_ON(cgrp->subsys[i] != dummytop->subsys[i]);
 			BUG_ON(cgrp->subsys[i]->cgroup != cgrp);
 			mutex_lock(&ss->hierarchy_mutex);
@@ -942,9 +1004,20 @@ static int rebind_subsystems(struct cgroupfs_root *root,
 			subsys[i]->root = &rootnode;
 			list_move(&ss->sibling, &rootnode.subsys_list);
 			mutex_unlock(&ss->hierarchy_mutex);
+			/* subsystem is now free - drop reference on module */
+			module_put(ss->module);
 		} else if (bit & final_bits) {
 			/* Subsystem state should already exist */
+			BUG_ON(ss == NULL);
 			BUG_ON(!cgrp->subsys[i]);
+			/*
+			 * a refcount was taken, but we already had one, so
+			 * drop the extra reference.
+			 */
+			module_put(ss->module);
+#ifdef CONFIG_MODULE_UNLOAD
+			BUG_ON(ss->module && !module_refcount(ss->module));
+#endif
 		} else {
 			/* Subsystem state shouldn't exist */
 			BUG_ON(cgrp->subsys[i]);
@@ -986,13 +1059,20 @@ struct cgroup_sb_opts {
 
 };
 
-/* Convert a hierarchy specifier into a bitmask of subsystems and
- * flags. */
-static int parse_cgroupfs_options(char *data,
-				     struct cgroup_sb_opts *opts)
+/*
+ * Convert a hierarchy specifier into a bitmask of subsystems and flags. Call
+ * with cgroup_mutex held to protect the subsys[] array. This function takes
+ * refcounts on subsystems to be used, unless it returns error, in which case
+ * no refcounts are taken.
+ */
+static int parse_cgroupfs_options(char *data, struct cgroup_sb_opts *opts)
 {
 	char *token, *o = data ?: "all";
 	unsigned long mask = (unsigned long)-1;
+	int i;
+	bool module_pin_failed = false;
+
+	BUG_ON(!mutex_is_locked(&cgroup_mutex));
 
 #ifdef CONFIG_CPUSETS
 	mask = ~(1UL << cpuset_subsys_id);
@@ -1005,10 +1085,11 @@ static int parse_cgroupfs_options(char *data,
 			return -EINVAL;
 		if (!strcmp(token, "all")) {
 			/* Add all non-disabled subsystems */
-			int i;
 			opts->subsys_bits = 0;
 			for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
 				struct cgroup_subsys *ss = subsys[i];
+				if (ss == NULL)
+					continue;
 				if (!ss->disabled)
 					opts->subsys_bits |= 1ul << i;
 			}
@@ -1026,7 +1107,6 @@ static int parse_cgroupfs_options(char *data,
 			if (!opts->release_agent)
 				return -ENOMEM;
 		} else if (!strncmp(token, "name=", 5)) {
-			int i;
 			const char *name = token + 5;
 			/* Can't specify an empty name */
 			if (!strlen(name))
@@ -1050,9 +1130,10 @@ static int parse_cgroupfs_options(char *data,
 				return -ENOMEM;
 		} else {
 			struct cgroup_subsys *ss;
-			int i;
 			for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
 				ss = subsys[i];
+				if (ss == NULL)
+					continue;
 				if (!strcmp(token, ss->name)) {
 					if (!ss->disabled)
 						set_bit(i, &opts->subsys_bits);
@@ -1087,9 +1168,54 @@ static int parse_cgroupfs_options(char *data,
 	if (!opts->subsys_bits && !opts->name)
 		return -EINVAL;
 
+	/*
+	 * Grab references on all the modules we'll need, so the subsystems
+	 * don't dance around before rebind_subsystems attaches them. This may
+	 * take duplicate reference counts on a subsystem that's already used,
+	 * but rebind_subsystems handles this case.
+	 */
+	for (i = CGROUP_BUILTIN_SUBSYS_COUNT; i < CGROUP_SUBSYS_COUNT; i++) {
+		unsigned long bit = 1UL << i;
+
+		if (!(bit & opts->subsys_bits))
+			continue;
+		if (!try_module_get(subsys[i]->module)) {
+			module_pin_failed = true;
+			break;
+		}
+	}
+	if (module_pin_failed) {
+		/*
+		 * oops, one of the modules was going away. this means that we
+		 * raced with a module_delete call, and to the user this is
+		 * essentially a "subsystem doesn't exist" case.
+		 */
+		for (i--; i >= CGROUP_BUILTIN_SUBSYS_COUNT; i--) {
+			/* drop refcounts only on the ones we took */
+			unsigned long bit = 1UL << i;
+
+			if (!(bit & opts->subsys_bits))
+				continue;
+			module_put(subsys[i]->module);
+		}
+		return -ENOENT;
+	}
+
 	return 0;
 }
 
+static void drop_parsed_module_refcounts(unsigned long subsys_bits)
+{
+	int i;
+	for (i = CGROUP_BUILTIN_SUBSYS_COUNT; i < CGROUP_SUBSYS_COUNT; i++) {
+		unsigned long bit = 1UL << i;
+
+		if (!(bit & subsys_bits))
+			continue;
+		module_put(subsys[i]->module);
+	}
+}
+
 static int cgroup_remount(struct super_block *sb, int *flags, char *data)
 {
 	int ret = 0;
@@ -1106,21 +1232,19 @@ static int cgroup_remount(struct super_block *sb, int *flags, char *data)
 	if (ret)
 		goto out_unlock;
 
-	/* Don't allow flags to change at remount */
-	if (opts.flags != root->flags) {
-		ret = -EINVAL;
-		goto out_unlock;
-	}
-
-	/* Don't allow name to change at remount */
-	if (opts.name && strcmp(opts.name, root->name)) {
+	/* Don't allow flags or name to change at remount */
+	if (opts.flags != root->flags ||
+	    (opts.name && strcmp(opts.name, root->name))) {
 		ret = -EINVAL;
+		drop_parsed_module_refcounts(opts.subsys_bits);
 		goto out_unlock;
 	}
 
 	ret = rebind_subsystems(root, opts.subsys_bits);
-	if (ret)
+	if (ret) {
+		drop_parsed_module_refcounts(opts.subsys_bits);
 		goto out_unlock;
+	}
 
 	/* (re)populate subsystem files */
 	cgroup_populate_dir(cgrp);
@@ -1151,6 +1275,8 @@ static void init_cgroup_housekeeping(struct cgroup *cgrp)
 	INIT_LIST_HEAD(&cgrp->release_list);
 	INIT_LIST_HEAD(&cgrp->pidlists);
 	mutex_init(&cgrp->pidlist_mutex);
+	INIT_LIST_HEAD(&cgrp->event_list);
+	spin_lock_init(&cgrp->event_list_lock);
 }
 
 static void init_cgroup_root(struct cgroupfs_root *root)
@@ -1306,7 +1432,9 @@ static int cgroup_get_sb(struct file_system_type *fs_type,
 	struct cgroupfs_root *new_root;
 
 	/* First find the desired set of subsystems */
+	mutex_lock(&cgroup_mutex);
 	ret = parse_cgroupfs_options(data, &opts);
+	mutex_unlock(&cgroup_mutex);
 	if (ret)
 		goto out_err;
 
@@ -1317,7 +1445,7 @@ static int cgroup_get_sb(struct file_system_type *fs_type,
 	new_root = cgroup_root_from_opts(&opts);
 	if (IS_ERR(new_root)) {
 		ret = PTR_ERR(new_root);
-		goto out_err;
+		goto drop_modules;
 	}
 	opts.new_root = new_root;
 
@@ -1326,7 +1454,7 @@ static int cgroup_get_sb(struct file_system_type *fs_type,
 	if (IS_ERR(sb)) {
 		ret = PTR_ERR(sb);
 		cgroup_drop_root(opts.new_root);
-		goto out_err;
+		goto drop_modules;
 	}
 
 	root = sb->s_fs_info;
@@ -1382,6 +1510,11 @@ static int cgroup_get_sb(struct file_system_type *fs_type,
 			free_cg_links(&tmp_cg_links);
 			goto drop_new_super;
 		}
+		/*
+		 * There must be no failure case after here, since rebinding
+		 * takes care of subsystems' refcounts, which are explicitly
+		 * dropped in the failure exit path.
+		 */
 
 		/* EBUSY should be the only error here */
 		BUG_ON(ret);
@@ -1420,6 +1553,8 @@ static int cgroup_get_sb(struct file_system_type *fs_type,
 		 * any) is not needed
 		 */
 		cgroup_drop_root(opts.new_root);
+		/* no subsys rebinding, so refcounts don't change */
+		drop_parsed_module_refcounts(opts.subsys_bits);
 	}
 
 	simple_set_mnt(mnt, sb);
@@ -1429,6 +1564,8 @@ static int cgroup_get_sb(struct file_system_type *fs_type,
 
  drop_new_super:
 	deactivate_locked_super(sb);
+ drop_modules:
+	drop_parsed_module_refcounts(opts.subsys_bits);
  out_err:
 	kfree(opts.release_agent);
 	kfree(opts.name);
@@ -1542,6 +1679,7 @@ int cgroup_path(const struct cgroup *cgrp, char *buf, int buflen)
 	memmove(buf, start, buf + buflen - start);
 	return 0;
 }
+EXPORT_SYMBOL_GPL(cgroup_path);
 
 /**
  * cgroup_attach_task - attach task 'tsk' to cgroup 'cgrp'
@@ -1554,7 +1692,7 @@ int cgroup_path(const struct cgroup *cgrp, char *buf, int buflen)
 int cgroup_attach_task(struct cgroup *cgrp, struct task_struct *tsk)
 {
 	int retval = 0;
-	struct cgroup_subsys *ss;
+	struct cgroup_subsys *ss, *failed_ss = NULL;
 	struct cgroup *oldcgrp;
 	struct css_set *cg;
 	struct css_set *newcg;
@@ -1568,8 +1706,16 @@ int cgroup_attach_task(struct cgroup *cgrp, struct task_struct *tsk)
 	for_each_subsys(root, ss) {
 		if (ss->can_attach) {
 			retval = ss->can_attach(ss, cgrp, tsk, false);
-			if (retval)
-				return retval;
+			if (retval) {
+				/*
+				 * Remember on which subsystem the can_attach()
+				 * failed, so that we only call cancel_attach()
+				 * against the subsystems whose can_attach()
+				 * succeeded. (See below)
+				 */
+				failed_ss = ss;
+				goto out;
+			}
 		}
 	}
 
@@ -1583,14 +1729,17 @@ int cgroup_attach_task(struct cgroup *cgrp, struct task_struct *tsk)
 	 */
 	newcg = find_css_set(cg, cgrp);
 	put_css_set(cg);
-	if (!newcg)
-		return -ENOMEM;
+	if (!newcg) {
+		retval = -ENOMEM;
+		goto out;
+	}
 
 	task_lock(tsk);
 	if (tsk->flags & PF_EXITING) {
 		task_unlock(tsk);
 		put_css_set(newcg);
-		return -ESRCH;
+		retval = -ESRCH;
+		goto out;
 	}
 	rcu_assign_pointer(tsk->cgroups, newcg);
 	task_unlock(tsk);
@@ -1616,7 +1765,22 @@ int cgroup_attach_task(struct cgroup *cgrp, struct task_struct *tsk)
 	 * is no longer empty.
 	 */
 	cgroup_wakeup_rmdir_waiter(cgrp);
-	return 0;
+out:
+	if (retval) {
+		for_each_subsys(root, ss) {
+			if (ss == failed_ss)
+				/*
+				 * This subsystem was the one that failed the
+				 * can_attach() check earlier, so we don't need
+				 * to call cancel_attach() against it or any
+				 * remaining subsystems.
+				 */
+				break;
+			if (ss->cancel_attach)
+				ss->cancel_attach(ss, cgrp, tsk, false);
+		}
+	}
+	return retval;
 }
 
 /*
@@ -1682,6 +1846,7 @@ bool cgroup_lock_live_group(struct cgroup *cgrp)
 	}
 	return true;
 }
+EXPORT_SYMBOL_GPL(cgroup_lock_live_group);
 
 static int cgroup_release_agent_write(struct cgroup *cgrp, struct cftype *cft,
 				      const char *buffer)
@@ -1950,6 +2115,16 @@ static const struct inode_operations cgroup_dir_inode_operations = {
 	.rename = cgroup_rename,
 };
 
+/*
+ * Check if a file is a control file
+ */
+static inline struct cftype *__file_cft(struct file *file)
+{
+	if (file->f_dentry->d_inode->i_fop != &cgroup_file_operations)
+		return ERR_PTR(-EINVAL);
+	return __d_cft(file->f_dentry);
+}
+
 static int cgroup_create_file(struct dentry *dentry, mode_t mode,
 				struct super_block *sb)
 {
@@ -2069,6 +2244,7 @@ int cgroup_add_file(struct cgroup *cgrp,
 		error = PTR_ERR(dentry);
 	return error;
 }
+EXPORT_SYMBOL_GPL(cgroup_add_file);
 
 int cgroup_add_files(struct cgroup *cgrp,
 			struct cgroup_subsys *subsys,
@@ -2083,6 +2259,7 @@ int cgroup_add_files(struct cgroup *cgrp,
 	}
 	return 0;
 }
+EXPORT_SYMBOL_GPL(cgroup_add_files);
 
 /**
  * cgroup_task_count - count the number of tasks in a cgroup.
@@ -2468,7 +2645,8 @@ static struct cgroup_pidlist *cgroup_pidlist_find(struct cgroup *cgrp,
 {
 	struct cgroup_pidlist *l;
 	/* don't need task_nsproxy() if we're looking at ourself */
-	struct pid_namespace *ns = get_pid_ns(current->nsproxy->pid_ns);
+	struct pid_namespace *ns = current->nsproxy->pid_ns;
+
 	/*
 	 * We can't drop the pidlist_mutex before taking the l->mutex in case
 	 * the last ref-holder is trying to remove l from the list at the same
@@ -2478,8 +2656,6 @@ static struct cgroup_pidlist *cgroup_pidlist_find(struct cgroup *cgrp,
 	mutex_lock(&cgrp->pidlist_mutex);
 	list_for_each_entry(l, &cgrp->pidlists, links) {
 		if (l->key.type == type && l->key.ns == ns) {
-			/* found a matching list - drop the extra refcount */
-			put_pid_ns(ns);
 			/* make sure l doesn't vanish out from under us */
 			down_write(&l->mutex);
 			mutex_unlock(&cgrp->pidlist_mutex);
@@ -2490,13 +2666,12 @@ static struct cgroup_pidlist *cgroup_pidlist_find(struct cgroup *cgrp,
 	l = kmalloc(sizeof(struct cgroup_pidlist), GFP_KERNEL);
 	if (!l) {
 		mutex_unlock(&cgrp->pidlist_mutex);
-		put_pid_ns(ns);
 		return l;
 	}
 	init_rwsem(&l->mutex);
 	down_write(&l->mutex);
 	l->key.type = type;
-	l->key.ns = ns;
+	l->key.ns = get_pid_ns(ns);
 	l->use_count = 0; /* don't increment here */
 	l->list = NULL;
 	l->owner = cgrp;
@@ -2804,6 +2979,174 @@ static int cgroup_write_notify_on_release(struct cgroup *cgrp,
 }
 
 /*
+ * Unregister event and free resources.
+ *
+ * Gets called from workqueue.
+ */
+static void cgroup_event_remove(struct work_struct *work)
+{
+	struct cgroup_event *event = container_of(work, struct cgroup_event,
+			remove);
+	struct cgroup *cgrp = event->cgrp;
+
+	/* TODO: check return code */
+	event->cft->unregister_event(cgrp, event->cft, event->eventfd);
+
+	eventfd_ctx_put(event->eventfd);
+	kfree(event);
+	dput(cgrp->dentry);
+}
+
+/*
+ * Gets called on POLLHUP on eventfd when user closes it.
+ *
+ * Called with wqh->lock held and interrupts disabled.
+ */
+static int cgroup_event_wake(wait_queue_t *wait, unsigned mode,
+		int sync, void *key)
+{
+	struct cgroup_event *event = container_of(wait,
+			struct cgroup_event, wait);
+	struct cgroup *cgrp = event->cgrp;
+	unsigned long flags = (unsigned long)key;
+
+	if (flags & POLLHUP) {
+		remove_wait_queue_locked(event->wqh, &event->wait);
+		spin_lock(&cgrp->event_list_lock);
+		list_del(&event->list);
+		spin_unlock(&cgrp->event_list_lock);
+		/*
+		 * We are in atomic context, but cgroup_event_remove() may
+		 * sleep, so we have to call it in workqueue.
+		 */
+		schedule_work(&event->remove);
+	}
+
+	return 0;
+}
+
+static void cgroup_event_ptable_queue_proc(struct file *file,
+		wait_queue_head_t *wqh, poll_table *pt)
+{
+	struct cgroup_event *event = container_of(pt,
+			struct cgroup_event, pt);
+
+	event->wqh = wqh;
+	add_wait_queue(wqh, &event->wait);
+}
+
+/*
+ * Parse input and register new cgroup event handler.
+ *
+ * Input must be in format '<event_fd> <control_fd> <args>'.
+ * Interpretation of args is defined by control file implementation.
+ */
+static int cgroup_write_event_control(struct cgroup *cgrp, struct cftype *cft,
+				      const char *buffer)
+{
+	struct cgroup_event *event = NULL;
+	unsigned int efd, cfd;
+	struct file *efile = NULL;
+	struct file *cfile = NULL;
+	char *endp;
+	int ret;
+
+	efd = simple_strtoul(buffer, &endp, 10);
+	if (*endp != ' ')
+		return -EINVAL;
+	buffer = endp + 1;
+
+	cfd = simple_strtoul(buffer, &endp, 10);
+	if ((*endp != ' ') && (*endp != '\0'))
+		return -EINVAL;
+	buffer = endp + 1;
+
+	event = kzalloc(sizeof(*event), GFP_KERNEL);
+	if (!event)
+		return -ENOMEM;
+	event->cgrp = cgrp;
+	INIT_LIST_HEAD(&event->list);
+	init_poll_funcptr(&event->pt, cgroup_event_ptable_queue_proc);
+	init_waitqueue_func_entry(&event->wait, cgroup_event_wake);
+	INIT_WORK(&event->remove, cgroup_event_remove);
+
+	efile = eventfd_fget(efd);
+	if (IS_ERR(efile)) {
+		ret = PTR_ERR(efile);
+		goto fail;
+	}
+
+	event->eventfd = eventfd_ctx_fileget(efile);
+	if (IS_ERR(event->eventfd)) {
+		ret = PTR_ERR(event->eventfd);
+		goto fail;
+	}
+
+	cfile = fget(cfd);
+	if (!cfile) {
+		ret = -EBADF;
+		goto fail;
+	}
+
+	/* the process need read permission on control file */
+	ret = file_permission(cfile, MAY_READ);
+	if (ret < 0)
+		goto fail;
+
+	event->cft = __file_cft(cfile);
+	if (IS_ERR(event->cft)) {
+		ret = PTR_ERR(event->cft);
+		goto fail;
+	}
+
+	if (!event->cft->register_event || !event->cft->unregister_event) {
+		ret = -EINVAL;
+		goto fail;
+	}
+
+	ret = event->cft->register_event(cgrp, event->cft,
+			event->eventfd, buffer);
+	if (ret)
+		goto fail;
+
+	if (efile->f_op->poll(efile, &event->pt) & POLLHUP) {
+		event->cft->unregister_event(cgrp, event->cft, event->eventfd);
+		ret = 0;
+		goto fail;
+	}
+
+	/*
+	 * Events should be removed after rmdir of cgroup directory, but before
+	 * destroying subsystem state objects. Let's take reference to cgroup
+	 * directory dentry to do that.
+	 */
+	dget(cgrp->dentry);
+
+	spin_lock(&cgrp->event_list_lock);
+	list_add(&event->list, &cgrp->event_list);
+	spin_unlock(&cgrp->event_list_lock);
+
+	fput(cfile);
+	fput(efile);
+
+	return 0;
+
+fail:
+	if (cfile)
+		fput(cfile);
+
+	if (event && event->eventfd && !IS_ERR(event->eventfd))
+		eventfd_ctx_put(event->eventfd);
+
+	if (!IS_ERR_OR_NULL(efile))
+		fput(efile);
+
+	kfree(event);
+
+	return ret;
+}
+
+/*
  * for the common functions, 'private' gives the type of file
  */
 /* for hysterical raisins, we can't put this on the older files */
@@ -2828,6 +3171,11 @@ static struct cftype files[] = {
 		.read_u64 = cgroup_read_notify_on_release,
 		.write_u64 = cgroup_write_notify_on_release,
 	},
+	{
+		.name = CGROUP_FILE_GENERIC_PREFIX "event_control",
+		.write_string = cgroup_write_event_control,
+		.mode = S_IWUGO,
+	},
 };
 
 static struct cftype cft_release_agent = {
@@ -2892,8 +3240,14 @@ static void cgroup_lock_hierarchy(struct cgroupfs_root *root)
 	/* We need to take each hierarchy_mutex in a consistent order */
 	int i;
 
+	/*
+	 * No worry about a race with rebind_subsystems that might mess up the
+	 * locking order, since both parties are under cgroup_mutex.
+	 */
 	for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
 		struct cgroup_subsys *ss = subsys[i];
+		if (ss == NULL)
+			continue;
 		if (ss->root == root)
 			mutex_lock(&ss->hierarchy_mutex);
 	}
@@ -2905,6 +3259,8 @@ static void cgroup_unlock_hierarchy(struct cgroupfs_root *root)
 
 	for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
 		struct cgroup_subsys *ss = subsys[i];
+		if (ss == NULL)
+			continue;
 		if (ss->root == root)
 			mutex_unlock(&ss->hierarchy_mutex);
 	}
@@ -3028,11 +3384,16 @@ static int cgroup_has_css_refs(struct cgroup *cgrp)
 	 * synchronization other than RCU, and the subsystem linked
 	 * list isn't RCU-safe */
 	int i;
+	/*
+	 * We won't need to lock the subsys array, because the subsystems
+	 * we're concerned about aren't going anywhere since our cgroup root
+	 * has a reference on them.
+	 */
 	for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
 		struct cgroup_subsys *ss = subsys[i];
 		struct cgroup_subsys_state *css;
-		/* Skip subsystems not in this hierarchy */
-		if (ss->root != cgrp->root)
+		/* Skip subsystems not present or not in this hierarchy */
+		if (ss == NULL || ss->root != cgrp->root)
 			continue;
 		css = cgrp->subsys[ss->subsys_id];
 		/* When called from check_for_release() it's possible
@@ -3106,6 +3467,7 @@ static int cgroup_rmdir(struct inode *unused_dir, struct dentry *dentry)
 	struct dentry *d;
 	struct cgroup *parent;
 	DEFINE_WAIT(wait);
+	struct cgroup_event *event, *tmp;
 	int ret;
 
 	/* the vfs holds both inode->i_mutex already */
@@ -3189,6 +3551,20 @@ again:
 	set_bit(CGRP_RELEASABLE, &parent->flags);
 	check_for_release(parent);
 
+	/*
+	 * Unregister events and notify userspace.
+	 * Notify userspace about cgroup removing only after rmdir of cgroup
+	 * directory to avoid race between userspace and kernelspace
+	 */
+	spin_lock(&cgrp->event_list_lock);
+	list_for_each_entry_safe(event, tmp, &cgrp->event_list, list) {
+		list_del(&event->list);
+		remove_wait_queue(event->wqh, &event->wait);
+		eventfd_signal(event->eventfd, 1);
+		schedule_work(&event->remove);
+	}
+	spin_unlock(&cgrp->event_list_lock);
+
 	mutex_unlock(&cgroup_mutex);
 	return 0;
 }
@@ -3223,7 +3599,196 @@ static void __init cgroup_init_subsys(struct cgroup_subsys *ss)
 	mutex_init(&ss->hierarchy_mutex);
 	lockdep_set_class(&ss->hierarchy_mutex, &ss->subsys_key);
 	ss->active = 1;
+
+	/* this function shouldn't be used with modular subsystems, since they
+	 * need to register a subsys_id, among other things */
+	BUG_ON(ss->module);
+}
+
+/**
+ * cgroup_load_subsys: load and register a modular subsystem at runtime
+ * @ss: the subsystem to load
+ *
+ * This function should be called in a modular subsystem's initcall. If the
+ * subsytem is built as a module, it will be assigned a new subsys_id and set
+ * up for use. If the subsystem is built-in anyway, work is delegated to the
+ * simpler cgroup_init_subsys.
+ */
+int __init_or_module cgroup_load_subsys(struct cgroup_subsys *ss)
+{
+	int i;
+	struct cgroup_subsys_state *css;
+
+	/* check name and function validity */
+	if (ss->name == NULL || strlen(ss->name) > MAX_CGROUP_TYPE_NAMELEN ||
+	    ss->create == NULL || ss->destroy == NULL)
+		return -EINVAL;
+
+	/*
+	 * we don't support callbacks in modular subsystems. this check is
+	 * before the ss->module check for consistency; a subsystem that could
+	 * be a module should still have no callbacks even if the user isn't
+	 * compiling it as one.
+	 */
+	if (ss->fork || ss->exit)
+		return -EINVAL;
+
+	/*
+	 * an optionally modular subsystem is built-in: we want to do nothing,
+	 * since cgroup_init_subsys will have already taken care of it.
+	 */
+	if (ss->module == NULL) {
+		/* a few sanity checks */
+		BUG_ON(ss->subsys_id >= CGROUP_BUILTIN_SUBSYS_COUNT);
+		BUG_ON(subsys[ss->subsys_id] != ss);
+		return 0;
+	}
+
+	/*
+	 * need to register a subsys id before anything else - for example,
+	 * init_cgroup_css needs it.
+	 */
+	mutex_lock(&cgroup_mutex);
+	/* find the first empty slot in the array */
+	for (i = CGROUP_BUILTIN_SUBSYS_COUNT; i < CGROUP_SUBSYS_COUNT; i++) {
+		if (subsys[i] == NULL)
+			break;
+	}
+	if (i == CGROUP_SUBSYS_COUNT) {
+		/* maximum number of subsystems already registered! */
+		mutex_unlock(&cgroup_mutex);
+		return -EBUSY;
+	}
+	/* assign ourselves the subsys_id */
+	ss->subsys_id = i;
+	subsys[i] = ss;
+
+	/*
+	 * no ss->create seems to need anything important in the ss struct, so
+	 * this can happen first (i.e. before the rootnode attachment).
+	 */
+	css = ss->create(ss, dummytop);
+	if (IS_ERR(css)) {
+		/* failure case - need to deassign the subsys[] slot. */
+		subsys[i] = NULL;
+		mutex_unlock(&cgroup_mutex);
+		return PTR_ERR(css);
+	}
+
+	list_add(&ss->sibling, &rootnode.subsys_list);
+	ss->root = &rootnode;
+
+	/* our new subsystem will be attached to the dummy hierarchy. */
+	init_cgroup_css(css, ss, dummytop);
+	/* init_idr must be after init_cgroup_css because it sets css->id. */
+	if (ss->use_id) {
+		int ret = cgroup_init_idr(ss, css);
+		if (ret) {
+			dummytop->subsys[ss->subsys_id] = NULL;
+			ss->destroy(ss, dummytop);
+			subsys[i] = NULL;
+			mutex_unlock(&cgroup_mutex);
+			return ret;
+		}
+	}
+
+	/*
+	 * Now we need to entangle the css into the existing css_sets. unlike
+	 * in cgroup_init_subsys, there are now multiple css_sets, so each one
+	 * will need a new pointer to it; done by iterating the css_set_table.
+	 * furthermore, modifying the existing css_sets will corrupt the hash
+	 * table state, so each changed css_set will need its hash recomputed.
+	 * this is all done under the css_set_lock.
+	 */
+	write_lock(&css_set_lock);
+	for (i = 0; i < CSS_SET_TABLE_SIZE; i++) {
+		struct css_set *cg;
+		struct hlist_node *node, *tmp;
+		struct hlist_head *bucket = &css_set_table[i], *new_bucket;
+
+		hlist_for_each_entry_safe(cg, node, tmp, bucket, hlist) {
+			/* skip entries that we already rehashed */
+			if (cg->subsys[ss->subsys_id])
+				continue;
+			/* remove existing entry */
+			hlist_del(&cg->hlist);
+			/* set new value */
+			cg->subsys[ss->subsys_id] = css;
+			/* recompute hash and restore entry */
+			new_bucket = css_set_hash(cg->subsys);
+			hlist_add_head(&cg->hlist, new_bucket);
+		}
+	}
+	write_unlock(&css_set_lock);
+
+	mutex_init(&ss->hierarchy_mutex);
+	lockdep_set_class(&ss->hierarchy_mutex, &ss->subsys_key);
+	ss->active = 1;
+
+	/* success! */
+	mutex_unlock(&cgroup_mutex);
+	return 0;
 }
+EXPORT_SYMBOL_GPL(cgroup_load_subsys);
+
+/**
+ * cgroup_unload_subsys: unload a modular subsystem
+ * @ss: the subsystem to unload
+ *
+ * This function should be called in a modular subsystem's exitcall. When this
+ * function is invoked, the refcount on the subsystem's module will be 0, so
+ * the subsystem will not be attached to any hierarchy.
+ */
+void cgroup_unload_subsys(struct cgroup_subsys *ss)
+{
+	struct cg_cgroup_link *link;
+	struct hlist_head *hhead;
+
+	BUG_ON(ss->module == NULL);
+
+	/*
+	 * we shouldn't be called if the subsystem is in use, and the use of
+	 * try_module_get in parse_cgroupfs_options should ensure that it
+	 * doesn't start being used while we're killing it off.
+	 */
+	BUG_ON(ss->root != &rootnode);
+
+	mutex_lock(&cgroup_mutex);
+	/* deassign the subsys_id */
+	BUG_ON(ss->subsys_id < CGROUP_BUILTIN_SUBSYS_COUNT);
+	subsys[ss->subsys_id] = NULL;
+
+	/* remove subsystem from rootnode's list of subsystems */
+	list_del(&ss->sibling);
+
+	/*
+	 * disentangle the css from all css_sets attached to the dummytop. as
+	 * in loading, we need to pay our respects to the hashtable gods.
+	 */
+	write_lock(&css_set_lock);
+	list_for_each_entry(link, &dummytop->css_sets, cgrp_link_list) {
+		struct css_set *cg = link->cg;
+
+		hlist_del(&cg->hlist);
+		BUG_ON(!cg->subsys[ss->subsys_id]);
+		cg->subsys[ss->subsys_id] = NULL;
+		hhead = css_set_hash(cg->subsys);
+		hlist_add_head(&cg->hlist, hhead);
+	}
+	write_unlock(&css_set_lock);
+
+	/*
+	 * remove subsystem's css from the dummytop and free it - need to free
+	 * before marking as null because ss->destroy needs the cgrp->subsys
+	 * pointer to find their state. note that this also takes care of
+	 * freeing the css_id.
+	 */
+	ss->destroy(ss, dummytop);
+	dummytop->subsys[ss->subsys_id] = NULL;
+
+	mutex_unlock(&cgroup_mutex);
+}
+EXPORT_SYMBOL_GPL(cgroup_unload_subsys);
 
 /**
  * cgroup_init_early - cgroup initialization at system boot
@@ -3253,7 +3818,8 @@ int __init cgroup_init_early(void)
 	for (i = 0; i < CSS_SET_TABLE_SIZE; i++)
 		INIT_HLIST_HEAD(&css_set_table[i]);
 
-	for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
+	/* at bootup time, we don't worry about modular subsystems */
+	for (i = 0; i < CGROUP_BUILTIN_SUBSYS_COUNT; i++) {
 		struct cgroup_subsys *ss = subsys[i];
 
 		BUG_ON(!ss->name);
@@ -3288,12 +3854,13 @@ int __init cgroup_init(void)
 	if (err)
 		return err;
 
-	for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
+	/* at bootup time, we don't worry about modular subsystems */
+	for (i = 0; i < CGROUP_BUILTIN_SUBSYS_COUNT; i++) {
 		struct cgroup_subsys *ss = subsys[i];
 		if (!ss->early_init)
 			cgroup_init_subsys(ss);
 		if (ss->use_id)
-			cgroup_subsys_init_idr(ss);
+			cgroup_init_idr(ss, init_css_set.subsys[ss->subsys_id]);
 	}
 
 	/* Add init_css_set to the hash table */
@@ -3397,9 +3964,16 @@ static int proc_cgroupstats_show(struct seq_file *m, void *v)
 	int i;
 
 	seq_puts(m, "#subsys_name\thierarchy\tnum_cgroups\tenabled\n");
+	/*
+	 * ideally we don't want subsystems moving around while we do this.
+	 * cgroup_mutex is also necessary to guarantee an atomic snapshot of
+	 * subsys/hierarchy state.
+	 */
 	mutex_lock(&cgroup_mutex);
 	for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
 		struct cgroup_subsys *ss = subsys[i];
+		if (ss == NULL)
+			continue;
 		seq_printf(m, "%s\t%d\t%d\t%d\n",
 			   ss->name, ss->root->hierarchy_id,
 			   ss->root->number_of_cgroups, !ss->disabled);
@@ -3457,7 +4031,12 @@ void cgroup_fork_callbacks(struct task_struct *child)
 {
 	if (need_forkexit_callback) {
 		int i;
-		for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
+		/*
+		 * forkexit callbacks are only supported for builtin
+		 * subsystems, and the builtin section of the subsys array is
+		 * immutable, so we don't need to lock the subsys array here.
+		 */
+		for (i = 0; i < CGROUP_BUILTIN_SUBSYS_COUNT; i++) {
 			struct cgroup_subsys *ss = subsys[i];
 			if (ss->fork)
 				ss->fork(ss, child);
@@ -3526,7 +4105,11 @@ void cgroup_exit(struct task_struct *tsk, int run_callbacks)
 	struct css_set *cg;
 
 	if (run_callbacks && need_forkexit_callback) {
-		for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
+		/*
+		 * modular subsystems can't use callbacks, so no need to lock
+		 * the subsys array
+		 */
+		for (i = 0; i < CGROUP_BUILTIN_SUBSYS_COUNT; i++) {
 			struct cgroup_subsys *ss = subsys[i];
 			if (ss->exit)
 				ss->exit(ss, tsk);
@@ -3720,12 +4303,13 @@ static void check_for_release(struct cgroup *cgrp)
 	}
 }
 
-void __css_put(struct cgroup_subsys_state *css)
+/* Caller must verify that the css is not for root cgroup */
+void __css_put(struct cgroup_subsys_state *css, int count)
 {
 	struct cgroup *cgrp = css->cgroup;
 	int val;
 	rcu_read_lock();
-	val = atomic_dec_return(&css->refcnt);
+	val = atomic_sub_return(count, &css->refcnt);
 	if (val == 1) {
 		if (notify_on_release(cgrp)) {
 			set_bit(CGRP_RELEASABLE, &cgrp->flags);
@@ -3736,6 +4320,7 @@ void __css_put(struct cgroup_subsys_state *css)
 	rcu_read_unlock();
 	WARN_ON_ONCE(val < 1);
 }
+EXPORT_SYMBOL_GPL(__css_put);
 
 /*
  * Notify userspace when a cgroup is released, by running the
@@ -3817,8 +4402,11 @@ static int __init cgroup_disable(char *str)
 	while ((token = strsep(&str, ",")) != NULL) {
 		if (!*token)
 			continue;
-
-		for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
+		/*
+		 * cgroup_disable, being at boot time, can't know about module
+		 * subsystems, so we don't worry about them.
+		 */
+		for (i = 0; i < CGROUP_BUILTIN_SUBSYS_COUNT; i++) {
 			struct cgroup_subsys *ss = subsys[i];
 
 			if (!strcmp(token, ss->name)) {
@@ -3848,6 +4436,7 @@ unsigned short css_id(struct cgroup_subsys_state *css)
 		return cssid->id;
 	return 0;
 }
+EXPORT_SYMBOL_GPL(css_id);
 
 unsigned short css_depth(struct cgroup_subsys_state *css)
 {
@@ -3857,6 +4446,7 @@ unsigned short css_depth(struct cgroup_subsys_state *css)
 		return cssid->depth;
 	return 0;
 }
+EXPORT_SYMBOL_GPL(css_depth);
 
 bool css_is_ancestor(struct cgroup_subsys_state *child,
 		    const struct cgroup_subsys_state *root)
@@ -3893,6 +4483,7 @@ void free_css_id(struct cgroup_subsys *ss, struct cgroup_subsys_state *css)
 	spin_unlock(&ss->id_lock);
 	call_rcu(&id->rcu_head, __free_css_id_cb);
 }
+EXPORT_SYMBOL_GPL(free_css_id);
 
 /*
  * This is called by init or create(). Then, calls to this function are
@@ -3942,15 +4533,14 @@ err_out:
 
 }
 
-static int __init cgroup_subsys_init_idr(struct cgroup_subsys *ss)
+static int __init_or_module cgroup_init_idr(struct cgroup_subsys *ss,
+					    struct cgroup_subsys_state *rootcss)
 {
 	struct css_id *newid;
-	struct cgroup_subsys_state *rootcss;
 
 	spin_lock_init(&ss->id_lock);
 	idr_init(&ss->idr);
 
-	rootcss = init_css_set.subsys[ss->subsys_id];
 	newid = get_new_cssid(ss, 0);
 	if (IS_ERR(newid))
 		return PTR_ERR(newid);
@@ -4010,6 +4600,7 @@ struct cgroup_subsys_state *css_lookup(struct cgroup_subsys *ss, int id)
 
 	return rcu_dereference(cssid->css);
 }
+EXPORT_SYMBOL_GPL(css_lookup);
 
 /**
  * css_get_next - lookup next cgroup under specified hierarchy.
diff --git a/kernel/exit.c b/kernel/exit.c
index ce1e48c2d93d..cce59cb5ee6a 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -87,7 +87,7 @@ static void __exit_signal(struct task_struct *tsk)
 
 	sighand = rcu_dereference_check(tsk->sighand,
 					rcu_read_lock_held() ||
-					lockdep_is_held(&tasklist_lock));
+					lockdep_tasklist_lock_is_held());
 	spin_lock(&sighand->siglock);
 
 	posix_cpu_timers_exit(tsk);
diff --git a/kernel/fork.c b/kernel/fork.c
index b0ec34abc0bb..4799c5f0e6d0 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -86,7 +86,14 @@ int max_threads;		/* tunable limit on nr_threads */
 DEFINE_PER_CPU(unsigned long, process_counts) = 0;
 
 __cacheline_aligned DEFINE_RWLOCK(tasklist_lock);  /* outer */
-EXPORT_SYMBOL_GPL(tasklist_lock);
+
+#ifdef CONFIG_PROVE_RCU
+int lockdep_tasklist_lock_is_held(void)
+{
+	return lockdep_is_held(&tasklist_lock);
+}
+EXPORT_SYMBOL_GPL(lockdep_tasklist_lock_is_held);
+#endif /* #ifdef CONFIG_PROVE_RCU */
 
 int nr_processes(void)
 {
@@ -833,17 +840,6 @@ static void posix_cpu_timers_init_group(struct signal_struct *sig)
 	/* Thread group counters. */
 	thread_group_cputime_init(sig);
 
-	/* Expiration times and increments. */
-	sig->it[CPUCLOCK_PROF].expires = cputime_zero;
-	sig->it[CPUCLOCK_PROF].incr = cputime_zero;
-	sig->it[CPUCLOCK_VIRT].expires = cputime_zero;
-	sig->it[CPUCLOCK_VIRT].incr = cputime_zero;
-
-	/* Cached expiration times. */
-	sig->cputime_expires.prof_exp = cputime_zero;
-	sig->cputime_expires.virt_exp = cputime_zero;
-	sig->cputime_expires.sched_exp = 0;
-
 	cpu_limit = ACCESS_ONCE(sig->rlim[RLIMIT_CPU].rlim_cur);
 	if (cpu_limit != RLIM_INFINITY) {
 		sig->cputime_expires.prof_exp = secs_to_cputime(cpu_limit);
@@ -863,7 +859,7 @@ static int copy_signal(unsigned long clone_flags, struct task_struct *tsk)
 	if (clone_flags & CLONE_THREAD)
 		return 0;
 
-	sig = kmem_cache_alloc(signal_cachep, GFP_KERNEL);
+	sig = kmem_cache_zalloc(signal_cachep, GFP_KERNEL);
 	tsk->signal = sig;
 	if (!sig)
 		return -ENOMEM;
@@ -871,46 +867,21 @@ static int copy_signal(unsigned long clone_flags, struct task_struct *tsk)
 	atomic_set(&sig->count, 1);
 	atomic_set(&sig->live, 1);
 	init_waitqueue_head(&sig->wait_chldexit);
-	sig->flags = 0;
 	if (clone_flags & CLONE_NEWPID)
 		sig->flags |= SIGNAL_UNKILLABLE;
-	sig->group_exit_code = 0;
-	sig->group_exit_task = NULL;
-	sig->group_stop_count = 0;
 	sig->curr_target = tsk;
 	init_sigpending(&sig->shared_pending);
 	INIT_LIST_HEAD(&sig->posix_timers);
 
 	hrtimer_init(&sig->real_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
-	sig->it_real_incr.tv64 = 0;
 	sig->real_timer.function = it_real_fn;
 
-	sig->leader = 0;	/* session leadership doesn't inherit */
-	sig->tty_old_pgrp = NULL;
-	sig->tty = NULL;
-
-	sig->utime = sig->stime = sig->cutime = sig->cstime = cputime_zero;
-	sig->gtime = cputime_zero;
-	sig->cgtime = cputime_zero;
-#ifndef CONFIG_VIRT_CPU_ACCOUNTING
-	sig->prev_utime = sig->prev_stime = cputime_zero;
-#endif
-	sig->nvcsw = sig->nivcsw = sig->cnvcsw = sig->cnivcsw = 0;
-	sig->min_flt = sig->maj_flt = sig->cmin_flt = sig->cmaj_flt = 0;
-	sig->inblock = sig->oublock = sig->cinblock = sig->coublock = 0;
-	sig->maxrss = sig->cmaxrss = 0;
-	task_io_accounting_init(&sig->ioac);
-	sig->sum_sched_runtime = 0;
-	taskstats_tgid_init(sig);
-
 	task_lock(current->group_leader);
 	memcpy(sig->rlim, current->signal->rlim, sizeof sig->rlim);
 	task_unlock(current->group_leader);
 
 	posix_cpu_timers_init_group(sig);
 
-	acct_init_pacct(&sig->pacct);
-
 	tty_audit_fork(sig);
 
 	sig->oom_adj = current->signal->oom_adj;
diff --git a/kernel/hw_breakpoint.c b/kernel/hw_breakpoint.c
index 967e66143e11..03808ed342a6 100644
--- a/kernel/hw_breakpoint.c
+++ b/kernel/hw_breakpoint.c
@@ -413,17 +413,17 @@ EXPORT_SYMBOL_GPL(unregister_hw_breakpoint);
  *
  * @return a set of per_cpu pointers to perf events
  */
-struct perf_event **
+struct perf_event * __percpu *
 register_wide_hw_breakpoint(struct perf_event_attr *attr,
 			    perf_overflow_handler_t triggered)
 {
-	struct perf_event **cpu_events, **pevent, *bp;
+	struct perf_event * __percpu *cpu_events, **pevent, *bp;
 	long err;
 	int cpu;
 
 	cpu_events = alloc_percpu(typeof(*cpu_events));
 	if (!cpu_events)
-		return ERR_PTR(-ENOMEM);
+		return (void __percpu __force *)ERR_PTR(-ENOMEM);
 
 	get_online_cpus();
 	for_each_online_cpu(cpu) {
@@ -451,7 +451,7 @@ fail:
 	put_online_cpus();
 
 	free_percpu(cpu_events);
-	return ERR_PTR(err);
+	return (void __percpu __force *)ERR_PTR(err);
 }
 EXPORT_SYMBOL_GPL(register_wide_hw_breakpoint);
 
@@ -459,7 +459,7 @@ EXPORT_SYMBOL_GPL(register_wide_hw_breakpoint);
  * unregister_wide_hw_breakpoint - unregister a wide breakpoint in the kernel
  * @cpu_events: the per cpu set of events to unregister
  */
-void unregister_wide_hw_breakpoint(struct perf_event **cpu_events)
+void unregister_wide_hw_breakpoint(struct perf_event * __percpu *cpu_events)
 {
 	int cpu;
 	struct perf_event **pevent;
@@ -489,5 +489,4 @@ struct pmu perf_ops_bp = {
 	.enable		= arch_install_hw_breakpoint,
 	.disable	= arch_uninstall_hw_breakpoint,
 	.read		= hw_breakpoint_pmu_read,
-	.unthrottle	= hw_breakpoint_pmu_unthrottle
 };
diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c
index d70394f12ee9..42ec11b2af8a 100644
--- a/kernel/irq/chip.c
+++ b/kernel/irq/chip.c
@@ -554,7 +554,7 @@ out:
  *	signal. The occurence is latched into the irq controller hardware
  *	and must be acked in order to be reenabled. After the ack another
  *	interrupt can happen on the same source even before the first one
- *	is handled by the assosiacted event handler. If this happens it
+ *	is handled by the associated event handler. If this happens it
  *	might be necessary to disable (mask) the interrupt depending on the
  *	controller hardware. This requires to reenable the interrupt inside
  *	of the loop which handles the interrupts which have arrived while
diff --git a/kernel/irq/devres.c b/kernel/irq/devres.c
index d06df9c41cba..1ef4ffcdfa55 100644
--- a/kernel/irq/devres.c
+++ b/kernel/irq/devres.c
@@ -42,7 +42,7 @@ static int devm_irq_match(struct device *dev, void *res, void *data)
  *	automatically freed on driver detach.
  *
  *	If an IRQ allocated with this function needs to be freed
- *	separately, dev_free_irq() must be used.
+ *	separately, devm_free_irq() must be used.
  */
 int devm_request_threaded_irq(struct device *dev, unsigned int irq,
 			      irq_handler_t handler, irq_handler_t thread_fn,
@@ -81,7 +81,7 @@ EXPORT_SYMBOL(devm_request_threaded_irq);
  *	Except for the extra @dev argument, this function takes the
  *	same arguments and performs the same function as free_irq().
  *	This function instead of free_irq() should be used to manually
- *	free IRQs allocated with dev_request_irq().
+ *	free IRQs allocated with devm_request_irq().
  */
 void devm_free_irq(struct device *dev, unsigned int irq, void *dev_id)
 {
diff --git a/kernel/kprobes.c b/kernel/kprobes.c
index fa034d29cf73..0ed46f3e51e9 100644
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -259,7 +259,8 @@ static void __kprobes __free_insn_slot(struct kprobe_insn_cache *c,
 	struct kprobe_insn_page *kip;
 
 	list_for_each_entry(kip, &c->pages, list) {
-		long idx = ((long)slot - (long)kip->insns) / c->insn_size;
+		long idx = ((long)slot - (long)kip->insns) /
+				(c->insn_size * sizeof(kprobe_opcode_t));
 		if (idx >= 0 && idx < slots_per_page(c)) {
 			WARN_ON(kip->slot_used[idx] != SLOT_USED);
 			if (dirty) {
diff --git a/kernel/ksysfs.c b/kernel/ksysfs.c
index 6b1ccc3f0205..21fe3c426948 100644
--- a/kernel/ksysfs.c
+++ b/kernel/ksysfs.c
@@ -33,7 +33,7 @@ static ssize_t uevent_seqnum_show(struct kobject *kobj,
 }
 KERNEL_ATTR_RO(uevent_seqnum);
 
-/* uevent helper program, used during early boo */
+/* uevent helper program, used during early boot */
 static ssize_t uevent_helper_show(struct kobject *kobj,
 				  struct kobj_attribute *attr, char *buf)
 {
diff --git a/kernel/lockdep.c b/kernel/lockdep.c
index 0c30d0455de1..c927a549db2c 100644
--- a/kernel/lockdep.c
+++ b/kernel/lockdep.c
@@ -3211,8 +3211,6 @@ void lock_acquire(struct lockdep_map *lock, unsigned int subclass,
 {
 	unsigned long flags;
 
-	trace_lock_acquire(lock, subclass, trylock, read, check, nest_lock, ip);
-
 	if (unlikely(current->lockdep_recursion))
 		return;
 
@@ -3220,6 +3218,7 @@ void lock_acquire(struct lockdep_map *lock, unsigned int subclass,
 	check_flags(flags);
 
 	current->lockdep_recursion = 1;
+	trace_lock_acquire(lock, subclass, trylock, read, check, nest_lock, ip);
 	__lock_acquire(lock, subclass, trylock, read, check,
 		       irqs_disabled_flags(flags), nest_lock, ip, 0);
 	current->lockdep_recursion = 0;
@@ -3232,14 +3231,13 @@ void lock_release(struct lockdep_map *lock, int nested,
 {
 	unsigned long flags;
 
-	trace_lock_release(lock, nested, ip);
-
 	if (unlikely(current->lockdep_recursion))
 		return;
 
 	raw_local_irq_save(flags);
 	check_flags(flags);
 	current->lockdep_recursion = 1;
+	trace_lock_release(lock, nested, ip);
 	__lock_release(lock, nested, ip);
 	current->lockdep_recursion = 0;
 	raw_local_irq_restore(flags);
@@ -3413,8 +3411,6 @@ void lock_contended(struct lockdep_map *lock, unsigned long ip)
 {
 	unsigned long flags;
 
-	trace_lock_contended(lock, ip);
-
 	if (unlikely(!lock_stat))
 		return;
 
@@ -3424,6 +3420,7 @@ void lock_contended(struct lockdep_map *lock, unsigned long ip)
 	raw_local_irq_save(flags);
 	check_flags(flags);
 	current->lockdep_recursion = 1;
+	trace_lock_contended(lock, ip);
 	__lock_contended(lock, ip);
 	current->lockdep_recursion = 0;
 	raw_local_irq_restore(flags);
@@ -3822,6 +3819,7 @@ void lockdep_rcu_dereference(const char *file, const int line)
 	printk("%s:%d invoked rcu_dereference_check() without protection!\n",
 			file, line);
 	printk("\nother info that might help us debug this:\n\n");
+	printk("\nrcu_scheduler_active = %d, debug_locks = %d\n", rcu_scheduler_active, debug_locks);
 	lockdep_print_held_locks(curr);
 	printk("\nstack backtrace:\n");
 	dump_stack();
diff --git a/kernel/module.c b/kernel/module.c
index e5538d5f00ad..c968d3606dca 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -1085,6 +1085,7 @@ static void add_sect_attrs(struct module *mod, unsigned int nsect,
 		if (sattr->name == NULL)
 			goto out;
 		sect_attrs->nsections++;
+		sysfs_attr_init(&sattr->mattr.attr);
 		sattr->mattr.show = module_sect_show;
 		sattr->mattr.store = NULL;
 		sattr->mattr.attr.name = sattr->name;
@@ -1180,6 +1181,7 @@ static void add_notes_attrs(struct module *mod, unsigned int nsect,
 		if (sect_empty(&sechdrs[i]))
 			continue;
 		if (sechdrs[i].sh_type == SHT_NOTE) {
+			sysfs_bin_attr_init(nattr);
 			nattr->attr.name = mod->sect_attrs->attrs[loaded].name;
 			nattr->attr.mode = S_IRUGO;
 			nattr->size = sechdrs[i].sh_size;
@@ -1252,6 +1254,7 @@ int module_add_modinfo_attrs(struct module *mod)
 		if (!attr->test ||
 		    (attr->test && attr->test(mod))) {
 			memcpy(temp_attr, attr, sizeof(*temp_attr));
+			sysfs_attr_init(&temp_attr->attr);
 			error = sysfs_create_file(&mod->mkobj.kobj,&temp_attr->attr);
 			++temp_attr;
 		}
diff --git a/kernel/nsproxy.c b/kernel/nsproxy.c
index 09b4ff9711b2..2ab67233ee8f 100644
--- a/kernel/nsproxy.c
+++ b/kernel/nsproxy.c
@@ -24,7 +24,18 @@
 
 static struct kmem_cache *nsproxy_cachep;
 
-struct nsproxy init_nsproxy = INIT_NSPROXY(init_nsproxy);
+struct nsproxy init_nsproxy = {
+	.count	= ATOMIC_INIT(1),
+	.uts_ns	= &init_uts_ns,
+#if defined(CONFIG_POSIX_MQUEUE) || defined(CONFIG_SYSVIPC)
+	.ipc_ns	= &init_ipc_ns,
+#endif
+	.mnt_ns	= NULL,
+	.pid_ns	= &init_pid_ns,
+#ifdef CONFIG_NET
+	.net_ns	= &init_net,
+#endif
+};
 
 static inline struct nsproxy *create_nsproxy(void)
 {
diff --git a/kernel/params.c b/kernel/params.c
index 8d95f5451b22..0b30ecd53a52 100644
--- a/kernel/params.c
+++ b/kernel/params.c
@@ -401,8 +401,8 @@ int param_get_string(char *buffer, struct kernel_param *kp)
 }
 
 /* sysfs output in /sys/modules/XYZ/parameters/ */
-#define to_module_attr(n) container_of(n, struct module_attribute, attr);
-#define to_module_kobject(n) container_of(n, struct module_kobject, kobj);
+#define to_module_attr(n) container_of(n, struct module_attribute, attr)
+#define to_module_kobject(n) container_of(n, struct module_kobject, kobj)
 
 extern struct kernel_param __start___param[], __stop___param[];
 
@@ -420,7 +420,7 @@ struct module_param_attrs
 };
 
 #ifdef CONFIG_SYSFS
-#define to_param_attr(n) container_of(n, struct param_attribute, mattr);
+#define to_param_attr(n) container_of(n, struct param_attribute, mattr)
 
 static ssize_t param_attr_show(struct module_attribute *mattr,
 			       struct module *mod, char *buf)
@@ -516,6 +516,7 @@ static __modinit int add_sysfs_param(struct module_kobject *mk,
 	new->grp.attrs = attrs;
 
 	/* Tack new one on the end. */
+	sysfs_attr_init(&new->attrs[num].mattr.attr);
 	new->attrs[num].param = kp;
 	new->attrs[num].mattr.show = param_attr_show;
 	new->attrs[num].mattr.store = param_attr_store;
@@ -722,7 +723,7 @@ static ssize_t module_attr_store(struct kobject *kobj,
 	return ret;
 }
 
-static struct sysfs_ops module_sysfs_ops = {
+static const struct sysfs_ops module_sysfs_ops = {
 	.show = module_attr_show,
 	.store = module_attr_store,
 };
@@ -736,7 +737,7 @@ static int uevent_filter(struct kset *kset, struct kobject *kobj)
 	return 0;
 }
 
-static struct kset_uevent_ops module_uevent_ops = {
+static const struct kset_uevent_ops module_uevent_ops = {
 	.filter = uevent_filter,
 };
 
diff --git a/kernel/perf_event.c b/kernel/perf_event.c
index 8e352c756ba7..574ee58a3046 100644
--- a/kernel/perf_event.c
+++ b/kernel/perf_event.c
@@ -56,21 +56,6 @@ static atomic_t nr_task_events __read_mostly;
  */
 int sysctl_perf_event_paranoid __read_mostly = 1;
 
-static inline bool perf_paranoid_tracepoint_raw(void)
-{
-	return sysctl_perf_event_paranoid > -1;
-}
-
-static inline bool perf_paranoid_cpu(void)
-{
-	return sysctl_perf_event_paranoid > 0;
-}
-
-static inline bool perf_paranoid_kernel(void)
-{
-	return sysctl_perf_event_paranoid > 1;
-}
-
 int sysctl_perf_event_mlock __read_mostly = 512; /* 'free' kb per user */
 
 /*
@@ -96,10 +81,6 @@ extern __weak const struct pmu *hw_perf_event_init(struct perf_event *event)
 void __weak hw_perf_disable(void)		{ barrier(); }
 void __weak hw_perf_enable(void)		{ barrier(); }
 
-void __weak hw_perf_event_setup(int cpu)	{ barrier(); }
-void __weak hw_perf_event_setup_online(int cpu)	{ barrier(); }
-void __weak hw_perf_event_setup_offline(int cpu)	{ barrier(); }
-
 int __weak
 hw_perf_group_sched_in(struct perf_event *group_leader,
 	       struct perf_cpu_context *cpuctx,
@@ -112,25 +93,15 @@ void __weak perf_event_print_debug(void)	{ }
 
 static DEFINE_PER_CPU(int, perf_disable_count);
 
-void __perf_disable(void)
-{
-	__get_cpu_var(perf_disable_count)++;
-}
-
-bool __perf_enable(void)
-{
-	return !--__get_cpu_var(perf_disable_count);
-}
-
 void perf_disable(void)
 {
-	__perf_disable();
-	hw_perf_disable();
+	if (!__get_cpu_var(perf_disable_count)++)
+		hw_perf_disable();
 }
 
 void perf_enable(void)
 {
-	if (__perf_enable())
+	if (!--__get_cpu_var(perf_disable_count))
 		hw_perf_enable();
 }
 
@@ -1553,12 +1524,15 @@ static void perf_ctx_adjust_freq(struct perf_event_context *ctx)
 		 */
 		if (interrupts == MAX_INTERRUPTS) {
 			perf_log_throttle(event, 1);
+			perf_disable();
 			event->pmu->unthrottle(event);
+			perf_enable();
 		}
 
 		if (!event->attr.freq || !event->attr.sample_freq)
 			continue;
 
+		perf_disable();
 		event->pmu->read(event);
 		now = atomic64_read(&event->count);
 		delta = now - hwc->freq_count_stamp;
@@ -1566,6 +1540,7 @@ static void perf_ctx_adjust_freq(struct perf_event_context *ctx)
 
 		if (delta > 0)
 			perf_adjust_period(event, TICK_NSEC, delta);
+		perf_enable();
 	}
 	raw_spin_unlock(&ctx->lock);
 }
@@ -1575,9 +1550,6 @@ static void perf_ctx_adjust_freq(struct perf_event_context *ctx)
  */
 static void rotate_ctx(struct perf_event_context *ctx)
 {
-	if (!ctx->nr_events)
-		return;
-
 	raw_spin_lock(&ctx->lock);
 
 	/* Rotate the first entry last of non-pinned groups */
@@ -1590,19 +1562,28 @@ void perf_event_task_tick(struct task_struct *curr)
 {
 	struct perf_cpu_context *cpuctx;
 	struct perf_event_context *ctx;
+	int rotate = 0;
 
 	if (!atomic_read(&nr_events))
 		return;
 
 	cpuctx = &__get_cpu_var(perf_cpu_context);
-	ctx = curr->perf_event_ctxp;
+	if (cpuctx->ctx.nr_events &&
+	    cpuctx->ctx.nr_events != cpuctx->ctx.nr_active)
+		rotate = 1;
 
-	perf_disable();
+	ctx = curr->perf_event_ctxp;
+	if (ctx && ctx->nr_events && ctx->nr_events != ctx->nr_active)
+		rotate = 1;
 
 	perf_ctx_adjust_freq(&cpuctx->ctx);
 	if (ctx)
 		perf_ctx_adjust_freq(ctx);
 
+	if (!rotate)
+		return;
+
+	perf_disable();
 	cpu_ctx_sched_out(cpuctx, EVENT_FLEXIBLE);
 	if (ctx)
 		task_ctx_sched_out(ctx, EVENT_FLEXIBLE);
@@ -1614,7 +1595,6 @@ void perf_event_task_tick(struct task_struct *curr)
 	cpu_ctx_sched_in(cpuctx, EVENT_FLEXIBLE);
 	if (ctx)
 		task_ctx_sched_in(curr, EVENT_FLEXIBLE);
-
 	perf_enable();
 }
 
@@ -2806,6 +2786,13 @@ __weak struct perf_callchain_entry *perf_callchain(struct pt_regs *regs)
 	return NULL;
 }
 
+#ifdef CONFIG_EVENT_TRACING
+__weak
+void perf_arch_fetch_caller_regs(struct pt_regs *regs, unsigned long ip, int skip)
+{
+}
+#endif
+
 /*
  * Output
  */
@@ -4123,8 +4110,7 @@ void __perf_sw_event(u32 event_id, u64 nr, int nmi,
 	if (rctx < 0)
 		return;
 
-	data.addr = addr;
-	data.raw  = NULL;
+	perf_sample_data_init(&data, addr);
 
 	do_perf_sw_event(PERF_TYPE_SOFTWARE, event_id, nr, nmi, &data, regs);
 
@@ -4169,11 +4155,10 @@ static enum hrtimer_restart perf_swevent_hrtimer(struct hrtimer *hrtimer)
 	struct perf_event *event;
 	u64 period;
 
-	event	= container_of(hrtimer, struct perf_event, hw.hrtimer);
+	event = container_of(hrtimer, struct perf_event, hw.hrtimer);
 	event->pmu->read(event);
 
-	data.addr = 0;
-	data.raw = NULL;
+	perf_sample_data_init(&data, 0);
 	data.period = event->hw.last_period;
 	regs = get_irq_regs();
 	/*
@@ -4335,26 +4320,20 @@ static const struct pmu perf_ops_task_clock = {
 #ifdef CONFIG_EVENT_TRACING
 
 void perf_tp_event(int event_id, u64 addr, u64 count, void *record,
-			  int entry_size)
+		   int entry_size, struct pt_regs *regs)
 {
+	struct perf_sample_data data;
 	struct perf_raw_record raw = {
 		.size = entry_size,
 		.data = record,
 	};
 
-	struct perf_sample_data data = {
-		.addr = addr,
-		.raw = &raw,
-	};
-
-	struct pt_regs *regs = get_irq_regs();
-
-	if (!regs)
-		regs = task_pt_regs(current);
+	perf_sample_data_init(&data, addr);
+	data.raw = &raw;
 
 	/* Trace events already protected against recursion */
 	do_perf_sw_event(PERF_TYPE_TRACEPOINT, event_id, count, 1,
-				&data, regs);
+			 &data, regs);
 }
 EXPORT_SYMBOL_GPL(perf_tp_event);
 
@@ -4370,7 +4349,7 @@ static int perf_tp_event_match(struct perf_event *event,
 
 static void tp_perf_event_destroy(struct perf_event *event)
 {
-	ftrace_profile_disable(event->attr.config);
+	perf_trace_disable(event->attr.config);
 }
 
 static const struct pmu *tp_perf_event_init(struct perf_event *event)
@@ -4384,7 +4363,7 @@ static const struct pmu *tp_perf_event_init(struct perf_event *event)
 			!capable(CAP_SYS_ADMIN))
 		return ERR_PTR(-EPERM);
 
-	if (ftrace_profile_enable(event->attr.config))
+	if (perf_trace_enable(event->attr.config))
 		return NULL;
 
 	event->destroy = tp_perf_event_destroy;
@@ -4463,8 +4442,7 @@ void perf_bp_event(struct perf_event *bp, void *data)
 	struct perf_sample_data sample;
 	struct pt_regs *regs = data;
 
-	sample.raw = NULL;
-	sample.addr = bp->attr.bp_addr;
+	perf_sample_data_init(&sample, bp->attr.bp_addr);
 
 	if (!perf_exclude_event(bp, regs))
 		perf_swevent_add(bp, 1, 1, &sample, regs);
@@ -5392,18 +5370,26 @@ int perf_event_init_task(struct task_struct *child)
 	return ret;
 }
 
+static void __init perf_event_init_all_cpus(void)
+{
+	int cpu;
+	struct perf_cpu_context *cpuctx;
+
+	for_each_possible_cpu(cpu) {
+		cpuctx = &per_cpu(perf_cpu_context, cpu);
+		__perf_event_init_context(&cpuctx->ctx, NULL);
+	}
+}
+
 static void __cpuinit perf_event_init_cpu(int cpu)
 {
 	struct perf_cpu_context *cpuctx;
 
 	cpuctx = &per_cpu(perf_cpu_context, cpu);
-	__perf_event_init_context(&cpuctx->ctx, NULL);
 
 	spin_lock(&perf_resource_lock);
 	cpuctx->max_pertask = perf_max_events - perf_reserved_percpu;
 	spin_unlock(&perf_resource_lock);
-
-	hw_perf_event_setup(cpu);
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
@@ -5443,20 +5429,11 @@ perf_cpu_notify(struct notifier_block *self, unsigned long action, void *hcpu)
 		perf_event_init_cpu(cpu);
 		break;
 
-	case CPU_ONLINE:
-	case CPU_ONLINE_FROZEN:
-		hw_perf_event_setup_online(cpu);
-		break;
-
 	case CPU_DOWN_PREPARE:
 	case CPU_DOWN_PREPARE_FROZEN:
 		perf_event_exit_cpu(cpu);
 		break;
 
-	case CPU_DEAD:
-		hw_perf_event_setup_offline(cpu);
-		break;
-
 	default:
 		break;
 	}
@@ -5474,6 +5451,7 @@ static struct notifier_block __cpuinitdata perf_cpu_nb = {
 
 void __init perf_event_init(void)
 {
+	perf_event_init_all_cpus();
 	perf_cpu_notify(&perf_cpu_nb, (unsigned long)CPU_UP_PREPARE,
 			(void *)(long)smp_processor_id());
 	perf_cpu_notify(&perf_cpu_nb, (unsigned long)CPU_ONLINE,
@@ -5481,13 +5459,16 @@ void __init perf_event_init(void)
 	register_cpu_notifier(&perf_cpu_nb);
 }
 
-static ssize_t perf_show_reserve_percpu(struct sysdev_class *class, char *buf)
+static ssize_t perf_show_reserve_percpu(struct sysdev_class *class,
+					struct sysdev_class_attribute *attr,
+					char *buf)
 {
 	return sprintf(buf, "%d\n", perf_reserved_percpu);
 }
 
 static ssize_t
 perf_set_reserve_percpu(struct sysdev_class *class,
+			struct sysdev_class_attribute *attr,
 			const char *buf,
 			size_t count)
 {
@@ -5516,13 +5497,17 @@ perf_set_reserve_percpu(struct sysdev_class *class,
 	return count;
 }
 
-static ssize_t perf_show_overcommit(struct sysdev_class *class, char *buf)
+static ssize_t perf_show_overcommit(struct sysdev_class *class,
+				    struct sysdev_class_attribute *attr,
+				    char *buf)
 {
 	return sprintf(buf, "%d\n", perf_overcommit);
 }
 
 static ssize_t
-perf_set_overcommit(struct sysdev_class *class, const char *buf, size_t count)
+perf_set_overcommit(struct sysdev_class *class,
+		    struct sysdev_class_attribute *attr,
+		    const char *buf, size_t count)
 {
 	unsigned long val;
 	int err;
diff --git a/kernel/pid.c b/kernel/pid.c
index 86b296943e5f..aebb30d9c233 100644
--- a/kernel/pid.c
+++ b/kernel/pid.c
@@ -367,7 +367,9 @@ struct task_struct *pid_task(struct pid *pid, enum pid_type type)
 	struct task_struct *result = NULL;
 	if (pid) {
 		struct hlist_node *first;
-		first = rcu_dereference_check(pid->tasks[type].first, rcu_read_lock_held() || lockdep_is_held(&tasklist_lock));
+		first = rcu_dereference_check(pid->tasks[type].first,
+					      rcu_read_lock_held() ||
+					      lockdep_tasklist_lock_is_held());
 		if (first)
 			result = hlist_entry(first, struct task_struct, pids[(type)].node);
 	}
diff --git a/kernel/pid_namespace.c b/kernel/pid_namespace.c
index 86b3796b0436..79aac93acf99 100644
--- a/kernel/pid_namespace.c
+++ b/kernel/pid_namespace.c
@@ -161,13 +161,12 @@ void zap_pid_ns_processes(struct pid_namespace *pid_ns)
 		rcu_read_lock();
 
 		/*
-		 * Use force_sig() since it clears SIGNAL_UNKILLABLE ensuring
-		 * any nested-container's init processes don't ignore the
-		 * signal
+		 * Any nested-container's init processes won't ignore the
+		 * SEND_SIG_NOINFO signal, see send_signal()->si_fromuser().
 		 */
 		task = pid_task(find_vpid(nr), PIDTYPE_PID);
 		if (task)
-			force_sig(SIGKILL, task);
+			send_sig_info(SIGKILL, SEND_SIG_NOINFO, task);
 
 		rcu_read_unlock();
 
diff --git a/kernel/rcutree.h b/kernel/rcutree.h
index 1439eb504c22..4a525a30e08e 100644
--- a/kernel/rcutree.h
+++ b/kernel/rcutree.h
@@ -246,12 +246,21 @@ struct rcu_data {
 
 #define RCU_JIFFIES_TILL_FORCE_QS	 3	/* for rsp->jiffies_force_qs */
 #ifdef CONFIG_RCU_CPU_STALL_DETECTOR
-#define RCU_SECONDS_TILL_STALL_CHECK   (10 * HZ)  /* for rsp->jiffies_stall */
-#define RCU_SECONDS_TILL_STALL_RECHECK (30 * HZ)  /* for rsp->jiffies_stall */
-#define RCU_STALL_RAT_DELAY		2	  /* Allow other CPUs time */
-						  /*  to take at least one */
-						  /*  scheduling clock irq */
-						  /*  before ratting on them. */
+
+#ifdef CONFIG_PROVE_RCU
+#define RCU_STALL_DELAY_DELTA	       (5 * HZ)
+#else
+#define RCU_STALL_DELAY_DELTA	       0
+#endif
+
+#define RCU_SECONDS_TILL_STALL_CHECK   (10 * HZ + RCU_STALL_DELAY_DELTA)
+						/* for rsp->jiffies_stall */
+#define RCU_SECONDS_TILL_STALL_RECHECK (30 * HZ + RCU_STALL_DELAY_DELTA)
+						/* for rsp->jiffies_stall */
+#define RCU_STALL_RAT_DELAY		2	/* Allow other CPUs time */
+						/*  to take at least one */
+						/*  scheduling clock irq */
+						/*  before ratting on them. */
 
 #endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
 
diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h
index 464ad2cdee00..79b53bda8943 100644
--- a/kernel/rcutree_plugin.h
+++ b/kernel/rcutree_plugin.h
@@ -1010,6 +1010,10 @@ int rcu_needs_cpu(int cpu)
 	int c = 0;
 	int thatcpu;
 
+	/* Check for being in the holdoff period. */
+	if (per_cpu(rcu_dyntick_holdoff, cpu) == jiffies)
+		return rcu_needs_cpu_quick_check(cpu);
+
 	/* Don't bother unless we are the last non-dyntick-idle CPU. */
 	for_each_cpu_not(thatcpu, nohz_cpu_mask)
 		if (thatcpu != cpu) {
@@ -1041,10 +1045,8 @@ int rcu_needs_cpu(int cpu)
 	}
 
 	/* If RCU callbacks are still pending, RCU still needs this CPU. */
-	if (c) {
+	if (c)
 		raise_softirq(RCU_SOFTIRQ);
-		per_cpu(rcu_dyntick_holdoff, cpu) = jiffies;
-	}
 	return c;
 }
 
diff --git a/kernel/sched.c b/kernel/sched.c
index b47ceeec1a91..9ab3cd7858d3 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -2359,7 +2359,7 @@ static int try_to_wake_up(struct task_struct *p, unsigned int state,
 {
 	int cpu, orig_cpu, this_cpu, success = 0;
 	unsigned long flags;
-	struct rq *rq, *orig_rq;
+	struct rq *rq;
 
 	if (!sched_feat(SYNC_WAKEUPS))
 		wake_flags &= ~WF_SYNC;
@@ -2367,7 +2367,7 @@ static int try_to_wake_up(struct task_struct *p, unsigned int state,
 	this_cpu = get_cpu();
 
 	smp_wmb();
-	rq = orig_rq = task_rq_lock(p, &flags);
+	rq = task_rq_lock(p, &flags);
 	update_rq_clock(rq);
 	if (!(p->state & state))
 		goto out;
@@ -7406,11 +7406,13 @@ static ssize_t sched_power_savings_store(const char *buf, size_t count, int smt)
 
 #ifdef CONFIG_SCHED_MC
 static ssize_t sched_mc_power_savings_show(struct sysdev_class *class,
+					   struct sysdev_class_attribute *attr,
 					   char *page)
 {
 	return sprintf(page, "%u\n", sched_mc_power_savings);
 }
 static ssize_t sched_mc_power_savings_store(struct sysdev_class *class,
+					    struct sysdev_class_attribute *attr,
 					    const char *buf, size_t count)
 {
 	return sched_power_savings_store(buf, count, 0);
@@ -7422,11 +7424,13 @@ static SYSDEV_CLASS_ATTR(sched_mc_power_savings, 0644,
 
 #ifdef CONFIG_SCHED_SMT
 static ssize_t sched_smt_power_savings_show(struct sysdev_class *dev,
+					    struct sysdev_class_attribute *attr,
 					    char *page)
 {
 	return sprintf(page, "%u\n", sched_smt_power_savings);
 }
 static ssize_t sched_smt_power_savings_store(struct sysdev_class *dev,
+					     struct sysdev_class_attribute *attr,
 					     const char *buf, size_t count)
 {
 	return sched_power_savings_store(buf, count, 1);
diff --git a/kernel/sched_cpupri.c b/kernel/sched_cpupri.c
index 82095bf2099f..fccf9fbb0d7b 100644
--- a/kernel/sched_cpupri.c
+++ b/kernel/sched_cpupri.c
@@ -56,7 +56,7 @@ static int convert_prio(int prio)
  * @lowest_mask: A mask to fill in with selected CPUs (or NULL)
  *
  * Note: This function returns the recommended CPUs as calculated during the
- * current invokation.  By the time the call returns, the CPUs may have in
+ * current invocation.  By the time the call returns, the CPUs may have in
  * fact changed priorities any number of times.  While not ideal, it is not
  * an issue of correctness since the normal rebalancer logic will correct
  * any discrepancies created by racing against the uncertainty of the current
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index 3e1fd96c6cf9..5a5ea2cd924f 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -3476,7 +3476,7 @@ static void run_rebalance_domains(struct softirq_action *h)
 
 static inline int on_null_domain(int cpu)
 {
-	return !rcu_dereference(cpu_rq(cpu)->sd);
+	return !rcu_dereference_sched(cpu_rq(cpu)->sd);
 }
 
 /*
diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c
index 5a6ed1f0990a..b5b920ae2ea7 100644
--- a/kernel/sched_rt.c
+++ b/kernel/sched_rt.c
@@ -1146,7 +1146,12 @@ static struct task_struct *pick_next_highest_task_rt(struct rq *rq, int cpu)
 		if (next && next->prio < idx)
 			continue;
 		list_for_each_entry(rt_se, array->queue + idx, run_list) {
-			struct task_struct *p = rt_task_of(rt_se);
+			struct task_struct *p;
+
+			if (!rt_entity_is_task(rt_se))
+				continue;
+
+			p = rt_task_of(rt_se);
 			if (pick_rt_task(rq, p, cpu)) {
 				next = p;
 				break;
diff --git a/kernel/sys.c b/kernel/sys.c
index 9814e43fb23b..8298878f4f71 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -33,6 +33,7 @@
 #include <linux/task_io_accounting_ops.h>
 #include <linux/seccomp.h>
 #include <linux/cpu.h>
+#include <linux/personality.h>
 #include <linux/ptrace.h>
 #include <linux/fs_struct.h>
 
@@ -1114,6 +1115,15 @@ out:
 
 DECLARE_RWSEM(uts_sem);
 
+#ifdef COMPAT_UTS_MACHINE
+#define override_architecture(name) \
+	(current->personality == PER_LINUX32 && \
+	 copy_to_user(name->machine, COMPAT_UTS_MACHINE, \
+		      sizeof(COMPAT_UTS_MACHINE)))
+#else
+#define override_architecture(name)	0
+#endif
+
 SYSCALL_DEFINE1(newuname, struct new_utsname __user *, name)
 {
 	int errno = 0;
@@ -1122,9 +1132,66 @@ SYSCALL_DEFINE1(newuname, struct new_utsname __user *, name)
 	if (copy_to_user(name, utsname(), sizeof *name))
 		errno = -EFAULT;
 	up_read(&uts_sem);
+
+	if (!errno && override_architecture(name))
+		errno = -EFAULT;
 	return errno;
 }
 
+#ifdef __ARCH_WANT_SYS_OLD_UNAME
+/*
+ * Old cruft
+ */
+SYSCALL_DEFINE1(uname, struct old_utsname __user *, name)
+{
+	int error = 0;
+
+	if (!name)
+		return -EFAULT;
+
+	down_read(&uts_sem);
+	if (copy_to_user(name, utsname(), sizeof(*name)))
+		error = -EFAULT;
+	up_read(&uts_sem);
+
+	if (!error && override_architecture(name))
+		error = -EFAULT;
+	return error;
+}
+
+SYSCALL_DEFINE1(olduname, struct oldold_utsname __user *, name)
+{
+	int error;
+
+	if (!name)
+		return -EFAULT;
+	if (!access_ok(VERIFY_WRITE, name, sizeof(struct oldold_utsname)))
+		return -EFAULT;
+
+	down_read(&uts_sem);
+	error = __copy_to_user(&name->sysname, &utsname()->sysname,
+			       __OLD_UTS_LEN);
+	error |= __put_user(0, name->sysname + __OLD_UTS_LEN);
+	error |= __copy_to_user(&name->nodename, &utsname()->nodename,
+				__OLD_UTS_LEN);
+	error |= __put_user(0, name->nodename + __OLD_UTS_LEN);
+	error |= __copy_to_user(&name->release, &utsname()->release,
+				__OLD_UTS_LEN);
+	error |= __put_user(0, name->release + __OLD_UTS_LEN);
+	error |= __copy_to_user(&name->version, &utsname()->version,
+				__OLD_UTS_LEN);
+	error |= __put_user(0, name->version + __OLD_UTS_LEN);
+	error |= __copy_to_user(&name->machine, &utsname()->machine,
+				__OLD_UTS_LEN);
+	error |= __put_user(0, name->machine + __OLD_UTS_LEN);
+	up_read(&uts_sem);
+
+	if (!error && override_architecture(name))
+		error = -EFAULT;
+	return error ? -EFAULT : 0;
+}
+#endif
+
 SYSCALL_DEFINE2(sethostname, char __user *, name, int, len)
 {
 	int errno;
diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c
index 695384f12a7d..70f2ea758ffe 100644
--- a/kernel/sys_ni.c
+++ b/kernel/sys_ni.c
@@ -126,6 +126,7 @@ cond_syscall(sys_setreuid16);
 cond_syscall(sys_setuid16);
 cond_syscall(sys_vm86old);
 cond_syscall(sys_vm86);
+cond_syscall(sys_ipc);
 cond_syscall(compat_sys_ipc);
 cond_syscall(compat_sys_sysctl);
 cond_syscall(sys_flock);
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 0ef19c614f6d..8686b0f5fc12 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -23,6 +23,7 @@
 #include <linux/swap.h>
 #include <linux/slab.h>
 #include <linux/sysctl.h>
+#include <linux/signal.h>
 #include <linux/proc_fs.h>
 #include <linux/security.h>
 #include <linux/ctype.h>
@@ -60,13 +61,23 @@
 #include <asm/stacktrace.h>
 #include <asm/io.h>
 #endif
+#ifdef CONFIG_BSD_PROCESS_ACCT
+#include <linux/acct.h>
+#endif
+#ifdef CONFIG_RT_MUTEXES
+#include <linux/rtmutex.h>
+#endif
+#if defined(CONFIG_PROVE_LOCKING) || defined(CONFIG_LOCK_STAT)
+#include <linux/lockdep.h>
+#endif
+#ifdef CONFIG_CHR_DEV_SG
+#include <scsi/sg.h>
+#endif
 
 
 #if defined(CONFIG_SYSCTL)
 
 /* External variables not in a header file. */
-extern int C_A_D;
-extern int print_fatal_signals;
 extern int sysctl_overcommit_memory;
 extern int sysctl_overcommit_ratio;
 extern int sysctl_panic_on_oom;
@@ -88,9 +99,6 @@ extern int sysctl_nr_open_min, sysctl_nr_open_max;
 #ifndef CONFIG_MMU
 extern int sysctl_nr_trim_pages;
 #endif
-#ifdef CONFIG_RCU_TORTURE_TEST
-extern int rcutorture_runnable;
-#endif /* #ifdef CONFIG_RCU_TORTURE_TEST */
 #ifdef CONFIG_BLOCK
 extern int blk_iopoll_enabled;
 #endif
@@ -120,14 +128,6 @@ static int min_percpu_pagelist_fract = 8;
 
 static int ngroups_max = NGROUPS_MAX;
 
-#ifdef CONFIG_MODULES
-extern char modprobe_path[];
-extern int modules_disabled;
-#endif
-#ifdef CONFIG_CHR_DEV_SG
-extern int sg_big_buff;
-#endif
-
 #ifdef CONFIG_SPARC
 #include <asm/system.h>
 #endif
@@ -149,10 +149,6 @@ extern int sysctl_userprocess_debug;
 extern int spin_retry;
 #endif
 
-#ifdef CONFIG_BSD_PROCESS_ACCT
-extern int acct_parm[];
-#endif
-
 #ifdef CONFIG_IA64
 extern int no_unaligned_warning;
 extern int unaligned_dump_stack;
@@ -160,10 +156,6 @@ extern int unaligned_dump_stack;
 
 extern struct ratelimit_state printk_ratelimit_state;
 
-#ifdef CONFIG_RT_MUTEXES
-extern int max_lock_depth;
-#endif
-
 #ifdef CONFIG_PROC_SYSCTL
 static int proc_do_cad_pid(struct ctl_table *table, int write,
 		  void __user *buffer, size_t *lenp, loff_t *ppos);
@@ -202,9 +194,6 @@ extern struct ctl_table epoll_table[];
 int sysctl_legacy_va_layout;
 #endif
 
-extern int prove_locking;
-extern int lock_stat;
-
 /* The default sysctl tables: */
 
 static struct ctl_table root_table[] = {
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index 1f663d23e85e..1f5dde637457 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -592,6 +592,10 @@ static inline void clocksource_select(void) { }
  */
 static int __init clocksource_done_booting(void)
 {
+	mutex_lock(&clocksource_mutex);
+	curr_clocksource = clocksource_default_clock();
+	mutex_unlock(&clocksource_mutex);
+
 	finished_booting = 1;
 
 	/*
diff --git a/kernel/trace/Makefile b/kernel/trace/Makefile
index d00c6fe23f54..78edc6490038 100644
--- a/kernel/trace/Makefile
+++ b/kernel/trace/Makefile
@@ -52,7 +52,7 @@ obj-$(CONFIG_EVENT_TRACING) += trace_events.o
 obj-$(CONFIG_EVENT_TRACING) += trace_export.o
 obj-$(CONFIG_FTRACE_SYSCALLS) += trace_syscalls.o
 ifeq ($(CONFIG_PERF_EVENTS),y)
-obj-$(CONFIG_EVENT_TRACING) += trace_event_profile.o
+obj-$(CONFIG_EVENT_TRACING) += trace_event_perf.o
 endif
 obj-$(CONFIG_EVENT_TRACING) += trace_events_filter.o
 obj-$(CONFIG_KPROBE_EVENT) += trace_kprobe.o
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 83783579378f..d9062f5cc0c0 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -27,6 +27,7 @@
 #include <linux/ctype.h>
 #include <linux/list.h>
 #include <linux/hash.h>
+#include <linux/rcupdate.h>
 
 #include <trace/events/sched.h>
 
@@ -84,22 +85,22 @@ ftrace_func_t ftrace_trace_function __read_mostly = ftrace_stub;
 ftrace_func_t __ftrace_trace_function __read_mostly = ftrace_stub;
 ftrace_func_t ftrace_pid_function __read_mostly = ftrace_stub;
 
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-static int ftrace_set_func(unsigned long *array, int *idx, char *buffer);
-#endif
-
+/*
+ * Traverse the ftrace_list, invoking all entries.  The reason that we
+ * can use rcu_dereference_raw() is that elements removed from this list
+ * are simply leaked, so there is no need to interact with a grace-period
+ * mechanism.  The rcu_dereference_raw() calls are needed to handle
+ * concurrent insertions into the ftrace_list.
+ *
+ * Silly Alpha and silly pointer-speculation compiler optimizations!
+ */
 static void ftrace_list_func(unsigned long ip, unsigned long parent_ip)
 {
-	struct ftrace_ops *op = ftrace_list;
-
-	/* in case someone actually ports this to alpha! */
-	read_barrier_depends();
+	struct ftrace_ops *op = rcu_dereference_raw(ftrace_list); /*see above*/
 
 	while (op != &ftrace_list_end) {
-		/* silly alpha */
-		read_barrier_depends();
 		op->func(ip, parent_ip);
-		op = op->next;
+		op = rcu_dereference_raw(op->next); /*see above*/
 	};
 }
 
@@ -154,8 +155,7 @@ static int __register_ftrace_function(struct ftrace_ops *ops)
 	 * the ops->next pointer is valid before another CPU sees
 	 * the ops pointer included into the ftrace_list.
 	 */
-	smp_wmb();
-	ftrace_list = ops;
+	rcu_assign_pointer(ftrace_list, ops);
 
 	if (ftrace_enabled) {
 		ftrace_func_t func;
@@ -2276,6 +2276,8 @@ __setup("ftrace_filter=", set_ftrace_filter);
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 static char ftrace_graph_buf[FTRACE_FILTER_SIZE] __initdata;
+static int ftrace_set_func(unsigned long *array, int *idx, char *buffer);
+
 static int __init set_graph_function(char *str)
 {
 	strlcpy(ftrace_graph_buf, str, FTRACE_FILTER_SIZE);
@@ -3351,6 +3353,7 @@ void ftrace_graph_init_task(struct task_struct *t)
 {
 	/* Make sure we do not use the parent ret_stack */
 	t->ret_stack = NULL;
+	t->curr_ret_stack = -1;
 
 	if (ftrace_graph_active) {
 		struct ftrace_ret_stack *ret_stack;
@@ -3360,7 +3363,6 @@ void ftrace_graph_init_task(struct task_struct *t)
 				GFP_KERNEL);
 		if (!ret_stack)
 			return;
-		t->curr_ret_stack = -1;
 		atomic_set(&t->tracing_graph_pause, 0);
 		atomic_set(&t->trace_overrun, 0);
 		t->ftrace_timestamp = 0;
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index 0287f9f52f5a..05a9f83b8819 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -2233,12 +2233,12 @@ ring_buffer_lock_reserve(struct ring_buffer *buffer, unsigned long length)
 	if (ring_buffer_flags != RB_BUFFERS_ON)
 		return NULL;
 
-	if (atomic_read(&buffer->record_disabled))
-		return NULL;
-
 	/* If we are tracing schedule, we don't want to recurse */
 	resched = ftrace_preempt_disable();
 
+	if (atomic_read(&buffer->record_disabled))
+		goto out_nocheck;
+
 	if (trace_recursive_lock())
 		goto out_nocheck;
 
@@ -2470,11 +2470,11 @@ int ring_buffer_write(struct ring_buffer *buffer,
 	if (ring_buffer_flags != RB_BUFFERS_ON)
 		return -EBUSY;
 
-	if (atomic_read(&buffer->record_disabled))
-		return -EBUSY;
-
 	resched = ftrace_preempt_disable();
 
+	if (atomic_read(&buffer->record_disabled))
+		goto out;
+
 	cpu = raw_smp_processor_id();
 
 	if (!cpumask_test_cpu(cpu, buffer->cpumask))
@@ -2542,7 +2542,7 @@ EXPORT_SYMBOL_GPL(ring_buffer_record_disable);
  * @buffer: The ring buffer to enable writes
  *
  * Note, multiple disables will need the same number of enables
- * to truely enable the writing (much like preempt_disable).
+ * to truly enable the writing (much like preempt_disable).
  */
 void ring_buffer_record_enable(struct ring_buffer *buffer)
 {
@@ -2578,7 +2578,7 @@ EXPORT_SYMBOL_GPL(ring_buffer_record_disable_cpu);
  * @cpu: The CPU to enable.
  *
  * Note, multiple disables will need the same number of enables
- * to truely enable the writing (much like preempt_disable).
+ * to truly enable the writing (much like preempt_disable).
  */
 void ring_buffer_record_enable_cpu(struct ring_buffer *buffer, int cpu)
 {
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index ed01fdba4a55..3ec2ee6f6560 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -374,6 +374,21 @@ static int __init set_buf_size(char *str)
 }
 __setup("trace_buf_size=", set_buf_size);
 
+static int __init set_tracing_thresh(char *str)
+{
+	unsigned long threshhold;
+	int ret;
+
+	if (!str)
+		return 0;
+	ret = strict_strtoul(str, 0, &threshhold);
+	if (ret < 0)
+		return 0;
+	tracing_thresh = threshhold * 1000;
+	return 1;
+}
+__setup("tracing_thresh=", set_tracing_thresh);
+
 unsigned long nsecs_to_usecs(unsigned long nsecs)
 {
 	return nsecs / 1000;
@@ -579,9 +594,10 @@ static ssize_t trace_seq_to_buffer(struct trace_seq *s, void *buf, size_t cnt)
 static arch_spinlock_t ftrace_max_lock =
 	(arch_spinlock_t)__ARCH_SPIN_LOCK_UNLOCKED;
 
+unsigned long __read_mostly	tracing_thresh;
+
 #ifdef CONFIG_TRACER_MAX_TRACE
 unsigned long __read_mostly	tracing_max_latency;
-unsigned long __read_mostly	tracing_thresh;
 
 /*
  * Copy the new maximum trace into the separate maximum-trace
@@ -592,7 +608,7 @@ static void
 __update_max_tr(struct trace_array *tr, struct task_struct *tsk, int cpu)
 {
 	struct trace_array_cpu *data = tr->data[cpu];
-	struct trace_array_cpu *max_data = tr->data[cpu];
+	struct trace_array_cpu *max_data;
 
 	max_tr.cpu = cpu;
 	max_tr.time_start = data->preempt_timestamp;
@@ -602,7 +618,7 @@ __update_max_tr(struct trace_array *tr, struct task_struct *tsk, int cpu)
 	max_data->critical_start = data->critical_start;
 	max_data->critical_end = data->critical_end;
 
-	memcpy(data->comm, tsk->comm, TASK_COMM_LEN);
+	memcpy(max_data->comm, tsk->comm, TASK_COMM_LEN);
 	max_data->pid = tsk->pid;
 	max_data->uid = task_uid(tsk);
 	max_data->nice = tsk->static_prio - 20 - MAX_RT_PRIO;
@@ -824,10 +840,10 @@ out:
 	mutex_unlock(&trace_types_lock);
 }
 
-static void __tracing_reset(struct trace_array *tr, int cpu)
+static void __tracing_reset(struct ring_buffer *buffer, int cpu)
 {
 	ftrace_disable_cpu();
-	ring_buffer_reset_cpu(tr->buffer, cpu);
+	ring_buffer_reset_cpu(buffer, cpu);
 	ftrace_enable_cpu();
 }
 
@@ -839,7 +855,7 @@ void tracing_reset(struct trace_array *tr, int cpu)
 
 	/* Make sure all commits have finished */
 	synchronize_sched();
-	__tracing_reset(tr, cpu);
+	__tracing_reset(buffer, cpu);
 
 	ring_buffer_record_enable(buffer);
 }
@@ -857,7 +873,7 @@ void tracing_reset_online_cpus(struct trace_array *tr)
 	tr->time_start = ftrace_now(tr->cpu);
 
 	for_each_online_cpu(cpu)
-		__tracing_reset(tr, cpu);
+		__tracing_reset(buffer, cpu);
 
 	ring_buffer_record_enable(buffer);
 }
@@ -934,6 +950,8 @@ void tracing_start(void)
 		goto out;
 	}
 
+	/* Prevent the buffers from switching */
+	arch_spin_lock(&ftrace_max_lock);
 
 	buffer = global_trace.buffer;
 	if (buffer)
@@ -943,6 +961,8 @@ void tracing_start(void)
 	if (buffer)
 		ring_buffer_record_enable(buffer);
 
+	arch_spin_unlock(&ftrace_max_lock);
+
 	ftrace_start();
  out:
 	spin_unlock_irqrestore(&tracing_start_lock, flags);
@@ -964,6 +984,9 @@ void tracing_stop(void)
 	if (trace_stop_count++)
 		goto out;
 
+	/* Prevent the buffers from switching */
+	arch_spin_lock(&ftrace_max_lock);
+
 	buffer = global_trace.buffer;
 	if (buffer)
 		ring_buffer_record_disable(buffer);
@@ -972,6 +995,8 @@ void tracing_stop(void)
 	if (buffer)
 		ring_buffer_record_disable(buffer);
 
+	arch_spin_unlock(&ftrace_max_lock);
+
  out:
 	spin_unlock_irqrestore(&tracing_start_lock, flags);
 }
@@ -1259,6 +1284,13 @@ ftrace_trace_userstack(struct ring_buffer *buffer, unsigned long flags, int pc)
 	if (!(trace_flags & TRACE_ITER_USERSTACKTRACE))
 		return;
 
+	/*
+	 * NMIs can not handle page faults, even with fix ups.
+	 * The save user stack can (and often does) fault.
+	 */
+	if (unlikely(in_nmi()))
+		return;
+
 	event = trace_buffer_lock_reserve(buffer, TRACE_USER_STACK,
 					  sizeof(*entry), flags, pc);
 	if (!event)
@@ -1703,6 +1735,7 @@ static void *s_start(struct seq_file *m, loff_t *pos)
 
 		ftrace_enable_cpu();
 
+		iter->leftover = 0;
 		for (p = iter; p && l < *pos; p = s_next(m, p, &l))
 			;
 
@@ -4248,10 +4281,10 @@ static __init int tracer_init_debugfs(void)
 #ifdef CONFIG_TRACER_MAX_TRACE
 	trace_create_file("tracing_max_latency", 0644, d_tracer,
 			&tracing_max_latency, &tracing_max_lat_fops);
+#endif
 
 	trace_create_file("tracing_thresh", 0644, d_tracer,
 			&tracing_thresh, &tracing_max_lat_fops);
-#endif
 
 	trace_create_file("README", 0444, d_tracer,
 			NULL, &tracing_readme_fops);
diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h
index fd05bcaf91b0..2825ef2c0b15 100644
--- a/kernel/trace/trace.h
+++ b/kernel/trace/trace.h
@@ -396,9 +396,10 @@ extern int process_new_ksym_entry(char *ksymname, int op, unsigned long addr);
 
 extern unsigned long nsecs_to_usecs(unsigned long nsecs);
 
+extern unsigned long tracing_thresh;
+
 #ifdef CONFIG_TRACER_MAX_TRACE
 extern unsigned long tracing_max_latency;
-extern unsigned long tracing_thresh;
 
 void update_max_tr(struct trace_array *tr, struct task_struct *tsk, int cpu);
 void update_max_tr_single(struct trace_array *tr,
@@ -550,7 +551,7 @@ static inline int ftrace_trace_task(struct task_struct *task)
  * struct trace_parser - servers for reading the user input separated by spaces
  * @cont: set if the input is not complete - no final space char was found
  * @buffer: holds the parsed user input
- * @idx: user input lenght
+ * @idx: user input length
  * @size: buffer size
  */
 struct trace_parser {
diff --git a/kernel/trace/trace_clock.c b/kernel/trace/trace_clock.c
index 84a3a7ba072a..6fbfb8f417b9 100644
--- a/kernel/trace/trace_clock.c
+++ b/kernel/trace/trace_clock.c
@@ -13,6 +13,7 @@
  * Tracer plugins will chose a default from these clocks.
  */
 #include <linux/spinlock.h>
+#include <linux/irqflags.h>
 #include <linux/hardirq.h>
 #include <linux/module.h>
 #include <linux/percpu.h>
diff --git a/kernel/trace/trace_event_profile.c b/kernel/trace/trace_event_perf.c
index f0d693005075..81f691eb3a30 100644
--- a/kernel/trace/trace_event_profile.c
+++ b/kernel/trace/trace_event_perf.c
@@ -1,32 +1,36 @@
 /*
- * trace event based perf counter profiling
+ * trace event based perf event profiling/tracing
  *
  * Copyright (C) 2009 Red Hat Inc, Peter Zijlstra <pzijlstr@redhat.com>
- *
+ * Copyright (C) 2009-2010 Frederic Weisbecker <fweisbec@gmail.com>
  */
 
 #include <linux/module.h>
 #include <linux/kprobes.h>
 #include "trace.h"
 
+DEFINE_PER_CPU(struct pt_regs, perf_trace_regs);
+EXPORT_PER_CPU_SYMBOL_GPL(perf_trace_regs);
+
+EXPORT_SYMBOL_GPL(perf_arch_fetch_caller_regs);
 
 static char *perf_trace_buf;
 static char *perf_trace_buf_nmi;
 
-typedef typeof(char [FTRACE_MAX_PROFILE_SIZE]) perf_trace_t ;
+typedef typeof(char [PERF_MAX_TRACE_SIZE]) perf_trace_t ;
 
 /* Count the events in use (per event id, not per instance) */
-static int	total_profile_count;
+static int	total_ref_count;
 
-static int ftrace_profile_enable_event(struct ftrace_event_call *event)
+static int perf_trace_event_enable(struct ftrace_event_call *event)
 {
 	char *buf;
 	int ret = -ENOMEM;
 
-	if (event->profile_count++ > 0)
+	if (event->perf_refcount++ > 0)
 		return 0;
 
-	if (!total_profile_count) {
+	if (!total_ref_count) {
 		buf = (char *)alloc_percpu(perf_trace_t);
 		if (!buf)
 			goto fail_buf;
@@ -40,35 +44,35 @@ static int ftrace_profile_enable_event(struct ftrace_event_call *event)
 		rcu_assign_pointer(perf_trace_buf_nmi, buf);
 	}
 
-	ret = event->profile_enable(event);
+	ret = event->perf_event_enable(event);
 	if (!ret) {
-		total_profile_count++;
+		total_ref_count++;
 		return 0;
 	}
 
 fail_buf_nmi:
-	if (!total_profile_count) {
+	if (!total_ref_count) {
 		free_percpu(perf_trace_buf_nmi);
 		free_percpu(perf_trace_buf);
 		perf_trace_buf_nmi = NULL;
 		perf_trace_buf = NULL;
 	}
 fail_buf:
-	event->profile_count--;
+	event->perf_refcount--;
 
 	return ret;
 }
 
-int ftrace_profile_enable(int event_id)
+int perf_trace_enable(int event_id)
 {
 	struct ftrace_event_call *event;
 	int ret = -EINVAL;
 
 	mutex_lock(&event_mutex);
 	list_for_each_entry(event, &ftrace_events, list) {
-		if (event->id == event_id && event->profile_enable &&
+		if (event->id == event_id && event->perf_event_enable &&
 		    try_module_get(event->mod)) {
-			ret = ftrace_profile_enable_event(event);
+			ret = perf_trace_event_enable(event);
 			break;
 		}
 	}
@@ -77,16 +81,16 @@ int ftrace_profile_enable(int event_id)
 	return ret;
 }
 
-static void ftrace_profile_disable_event(struct ftrace_event_call *event)
+static void perf_trace_event_disable(struct ftrace_event_call *event)
 {
 	char *buf, *nmi_buf;
 
-	if (--event->profile_count > 0)
+	if (--event->perf_refcount > 0)
 		return;
 
-	event->profile_disable(event);
+	event->perf_event_disable(event);
 
-	if (!--total_profile_count) {
+	if (!--total_ref_count) {
 		buf = perf_trace_buf;
 		rcu_assign_pointer(perf_trace_buf, NULL);
 
@@ -104,14 +108,14 @@ static void ftrace_profile_disable_event(struct ftrace_event_call *event)
 	}
 }
 
-void ftrace_profile_disable(int event_id)
+void perf_trace_disable(int event_id)
 {
 	struct ftrace_event_call *event;
 
 	mutex_lock(&event_mutex);
 	list_for_each_entry(event, &ftrace_events, list) {
 		if (event->id == event_id) {
-			ftrace_profile_disable_event(event);
+			perf_trace_event_disable(event);
 			module_put(event->mod);
 			break;
 		}
@@ -119,8 +123,8 @@ void ftrace_profile_disable(int event_id)
 	mutex_unlock(&event_mutex);
 }
 
-__kprobes void *ftrace_perf_buf_prepare(int size, unsigned short type,
-					int *rctxp, unsigned long *irq_flags)
+__kprobes void *perf_trace_buf_prepare(int size, unsigned short type,
+				       int *rctxp, unsigned long *irq_flags)
 {
 	struct trace_entry *entry;
 	char *trace_buf, *raw_data;
@@ -138,9 +142,9 @@ __kprobes void *ftrace_perf_buf_prepare(int size, unsigned short type,
 	cpu = smp_processor_id();
 
 	if (in_nmi())
-		trace_buf = rcu_dereference(perf_trace_buf_nmi);
+		trace_buf = rcu_dereference_sched(perf_trace_buf_nmi);
 	else
-		trace_buf = rcu_dereference(perf_trace_buf);
+		trace_buf = rcu_dereference_sched(perf_trace_buf);
 
 	if (!trace_buf)
 		goto err;
@@ -161,4 +165,4 @@ err_recursion:
 	local_irq_restore(*irq_flags);
 	return NULL;
 }
-EXPORT_SYMBOL_GPL(ftrace_perf_buf_prepare);
+EXPORT_SYMBOL_GPL(perf_trace_buf_prepare);
diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c
index 3f972ad98d04..beab8bf2f310 100644
--- a/kernel/trace/trace_events.c
+++ b/kernel/trace/trace_events.c
@@ -938,7 +938,7 @@ event_create_dir(struct ftrace_event_call *call, struct dentry *d_events,
 		trace_create_file("enable", 0644, call->dir, call,
 				  enable);
 
-	if (call->id && call->profile_enable)
+	if (call->id && call->perf_event_enable)
 		trace_create_file("id", 0444, call->dir, call,
 		 		  id);
 
diff --git a/kernel/trace/trace_functions_graph.c b/kernel/trace/trace_functions_graph.c
index 3fc2a575664f..e6989d9b44da 100644
--- a/kernel/trace/trace_functions_graph.c
+++ b/kernel/trace/trace_functions_graph.c
@@ -237,6 +237,14 @@ int trace_graph_entry(struct ftrace_graph_ent *trace)
 	return ret;
 }
 
+int trace_graph_thresh_entry(struct ftrace_graph_ent *trace)
+{
+	if (tracing_thresh)
+		return 1;
+	else
+		return trace_graph_entry(trace);
+}
+
 static void __trace_graph_return(struct trace_array *tr,
 				struct ftrace_graph_ret *trace,
 				unsigned long flags,
@@ -290,13 +298,26 @@ void set_graph_array(struct trace_array *tr)
 	smp_mb();
 }
 
+void trace_graph_thresh_return(struct ftrace_graph_ret *trace)
+{
+	if (tracing_thresh &&
+	    (trace->rettime - trace->calltime < tracing_thresh))
+		return;
+	else
+		trace_graph_return(trace);
+}
+
 static int graph_trace_init(struct trace_array *tr)
 {
 	int ret;
 
 	set_graph_array(tr);
-	ret = register_ftrace_graph(&trace_graph_return,
-				    &trace_graph_entry);
+	if (tracing_thresh)
+		ret = register_ftrace_graph(&trace_graph_thresh_return,
+					    &trace_graph_thresh_entry);
+	else
+		ret = register_ftrace_graph(&trace_graph_return,
+					    &trace_graph_entry);
 	if (ret)
 		return ret;
 	tracing_start_cmdline_record();
@@ -920,7 +941,7 @@ print_graph_return(struct ftrace_graph_ret *trace, struct trace_seq *s,
 		if (!ret)
 			return TRACE_TYPE_PARTIAL_LINE;
 	} else {
-		ret = trace_seq_printf(s, "} (%ps)\n", (void *)trace->func);
+		ret = trace_seq_printf(s, "} /* %ps */\n", (void *)trace->func);
 		if (!ret)
 			return TRACE_TYPE_PARTIAL_LINE;
 	}
diff --git a/kernel/trace/trace_kprobe.c b/kernel/trace/trace_kprobe.c
index 505c92273b1a..1251e367bae9 100644
--- a/kernel/trace/trace_kprobe.c
+++ b/kernel/trace/trace_kprobe.c
@@ -1214,7 +1214,7 @@ static int set_print_fmt(struct trace_probe *tp)
 #ifdef CONFIG_PERF_EVENTS
 
 /* Kprobe profile handler */
-static __kprobes void kprobe_profile_func(struct kprobe *kp,
+static __kprobes void kprobe_perf_func(struct kprobe *kp,
 					 struct pt_regs *regs)
 {
 	struct trace_probe *tp = container_of(kp, struct trace_probe, rp.kp);
@@ -1227,11 +1227,11 @@ static __kprobes void kprobe_profile_func(struct kprobe *kp,
 	__size = SIZEOF_KPROBE_TRACE_ENTRY(tp->nr_args);
 	size = ALIGN(__size + sizeof(u32), sizeof(u64));
 	size -= sizeof(u32);
-	if (WARN_ONCE(size > FTRACE_MAX_PROFILE_SIZE,
+	if (WARN_ONCE(size > PERF_MAX_TRACE_SIZE,
 		     "profile buffer not large enough"))
 		return;
 
-	entry = ftrace_perf_buf_prepare(size, call->id, &rctx, &irq_flags);
+	entry = perf_trace_buf_prepare(size, call->id, &rctx, &irq_flags);
 	if (!entry)
 		return;
 
@@ -1240,11 +1240,11 @@ static __kprobes void kprobe_profile_func(struct kprobe *kp,
 	for (i = 0; i < tp->nr_args; i++)
 		entry->args[i] = call_fetch(&tp->args[i].fetch, regs);
 
-	ftrace_perf_buf_submit(entry, size, rctx, entry->ip, 1, irq_flags);
+	perf_trace_buf_submit(entry, size, rctx, entry->ip, 1, irq_flags, regs);
 }
 
 /* Kretprobe profile handler */
-static __kprobes void kretprobe_profile_func(struct kretprobe_instance *ri,
+static __kprobes void kretprobe_perf_func(struct kretprobe_instance *ri,
 					    struct pt_regs *regs)
 {
 	struct trace_probe *tp = container_of(ri->rp, struct trace_probe, rp);
@@ -1257,11 +1257,11 @@ static __kprobes void kretprobe_profile_func(struct kretprobe_instance *ri,
 	__size = SIZEOF_KRETPROBE_TRACE_ENTRY(tp->nr_args);
 	size = ALIGN(__size + sizeof(u32), sizeof(u64));
 	size -= sizeof(u32);
-	if (WARN_ONCE(size > FTRACE_MAX_PROFILE_SIZE,
+	if (WARN_ONCE(size > PERF_MAX_TRACE_SIZE,
 		     "profile buffer not large enough"))
 		return;
 
-	entry = ftrace_perf_buf_prepare(size, call->id, &rctx, &irq_flags);
+	entry = perf_trace_buf_prepare(size, call->id, &rctx, &irq_flags);
 	if (!entry)
 		return;
 
@@ -1271,10 +1271,11 @@ static __kprobes void kretprobe_profile_func(struct kretprobe_instance *ri,
 	for (i = 0; i < tp->nr_args; i++)
 		entry->args[i] = call_fetch(&tp->args[i].fetch, regs);
 
-	ftrace_perf_buf_submit(entry, size, rctx, entry->ret_ip, 1, irq_flags);
+	perf_trace_buf_submit(entry, size, rctx, entry->ret_ip, 1,
+			       irq_flags, regs);
 }
 
-static int probe_profile_enable(struct ftrace_event_call *call)
+static int probe_perf_enable(struct ftrace_event_call *call)
 {
 	struct trace_probe *tp = (struct trace_probe *)call->data;
 
@@ -1286,7 +1287,7 @@ static int probe_profile_enable(struct ftrace_event_call *call)
 		return enable_kprobe(&tp->rp.kp);
 }
 
-static void probe_profile_disable(struct ftrace_event_call *call)
+static void probe_perf_disable(struct ftrace_event_call *call)
 {
 	struct trace_probe *tp = (struct trace_probe *)call->data;
 
@@ -1311,7 +1312,7 @@ int kprobe_dispatcher(struct kprobe *kp, struct pt_regs *regs)
 		kprobe_trace_func(kp, regs);
 #ifdef CONFIG_PERF_EVENTS
 	if (tp->flags & TP_FLAG_PROFILE)
-		kprobe_profile_func(kp, regs);
+		kprobe_perf_func(kp, regs);
 #endif
 	return 0;	/* We don't tweek kernel, so just return 0 */
 }
@@ -1325,7 +1326,7 @@ int kretprobe_dispatcher(struct kretprobe_instance *ri, struct pt_regs *regs)
 		kretprobe_trace_func(ri, regs);
 #ifdef CONFIG_PERF_EVENTS
 	if (tp->flags & TP_FLAG_PROFILE)
-		kretprobe_profile_func(ri, regs);
+		kretprobe_perf_func(ri, regs);
 #endif
 	return 0;	/* We don't tweek kernel, so just return 0 */
 }
@@ -1358,8 +1359,8 @@ static int register_probe_event(struct trace_probe *tp)
 	call->unregfunc = probe_event_disable;
 
 #ifdef CONFIG_PERF_EVENTS
-	call->profile_enable = probe_profile_enable;
-	call->profile_disable = probe_profile_disable;
+	call->perf_event_enable = probe_perf_enable;
+	call->perf_event_disable = probe_perf_disable;
 #endif
 	call->data = tp;
 	ret = trace_add_event_call(call);
diff --git a/kernel/trace/trace_syscalls.c b/kernel/trace/trace_syscalls.c
index cba47d7935cc..33c2a5b769dc 100644
--- a/kernel/trace/trace_syscalls.c
+++ b/kernel/trace/trace_syscalls.c
@@ -428,12 +428,12 @@ core_initcall(init_ftrace_syscalls);
 
 #ifdef CONFIG_PERF_EVENTS
 
-static DECLARE_BITMAP(enabled_prof_enter_syscalls, NR_syscalls);
-static DECLARE_BITMAP(enabled_prof_exit_syscalls, NR_syscalls);
-static int sys_prof_refcount_enter;
-static int sys_prof_refcount_exit;
+static DECLARE_BITMAP(enabled_perf_enter_syscalls, NR_syscalls);
+static DECLARE_BITMAP(enabled_perf_exit_syscalls, NR_syscalls);
+static int sys_perf_refcount_enter;
+static int sys_perf_refcount_exit;
 
-static void prof_syscall_enter(struct pt_regs *regs, long id)
+static void perf_syscall_enter(struct pt_regs *regs, long id)
 {
 	struct syscall_metadata *sys_data;
 	struct syscall_trace_enter *rec;
@@ -443,7 +443,7 @@ static void prof_syscall_enter(struct pt_regs *regs, long id)
 	int size;
 
 	syscall_nr = syscall_get_nr(current, regs);
-	if (!test_bit(syscall_nr, enabled_prof_enter_syscalls))
+	if (!test_bit(syscall_nr, enabled_perf_enter_syscalls))
 		return;
 
 	sys_data = syscall_nr_to_meta(syscall_nr);
@@ -455,11 +455,11 @@ static void prof_syscall_enter(struct pt_regs *regs, long id)
 	size = ALIGN(size + sizeof(u32), sizeof(u64));
 	size -= sizeof(u32);
 
-	if (WARN_ONCE(size > FTRACE_MAX_PROFILE_SIZE,
-		      "profile buffer not large enough"))
+	if (WARN_ONCE(size > PERF_MAX_TRACE_SIZE,
+		      "perf buffer not large enough"))
 		return;
 
-	rec = (struct syscall_trace_enter *)ftrace_perf_buf_prepare(size,
+	rec = (struct syscall_trace_enter *)perf_trace_buf_prepare(size,
 				sys_data->enter_event->id, &rctx, &flags);
 	if (!rec)
 		return;
@@ -467,10 +467,10 @@ static void prof_syscall_enter(struct pt_regs *regs, long id)
 	rec->nr = syscall_nr;
 	syscall_get_arguments(current, regs, 0, sys_data->nb_args,
 			       (unsigned long *)&rec->args);
-	ftrace_perf_buf_submit(rec, size, rctx, 0, 1, flags);
+	perf_trace_buf_submit(rec, size, rctx, 0, 1, flags, regs);
 }
 
-int prof_sysenter_enable(struct ftrace_event_call *call)
+int perf_sysenter_enable(struct ftrace_event_call *call)
 {
 	int ret = 0;
 	int num;
@@ -478,34 +478,34 @@ int prof_sysenter_enable(struct ftrace_event_call *call)
 	num = ((struct syscall_metadata *)call->data)->syscall_nr;
 
 	mutex_lock(&syscall_trace_lock);
-	if (!sys_prof_refcount_enter)
-		ret = register_trace_sys_enter(prof_syscall_enter);
+	if (!sys_perf_refcount_enter)
+		ret = register_trace_sys_enter(perf_syscall_enter);
 	if (ret) {
 		pr_info("event trace: Could not activate"
 				"syscall entry trace point");
 	} else {
-		set_bit(num, enabled_prof_enter_syscalls);
-		sys_prof_refcount_enter++;
+		set_bit(num, enabled_perf_enter_syscalls);
+		sys_perf_refcount_enter++;
 	}
 	mutex_unlock(&syscall_trace_lock);
 	return ret;
 }
 
-void prof_sysenter_disable(struct ftrace_event_call *call)
+void perf_sysenter_disable(struct ftrace_event_call *call)
 {
 	int num;
 
 	num = ((struct syscall_metadata *)call->data)->syscall_nr;
 
 	mutex_lock(&syscall_trace_lock);
-	sys_prof_refcount_enter--;
-	clear_bit(num, enabled_prof_enter_syscalls);
-	if (!sys_prof_refcount_enter)
-		unregister_trace_sys_enter(prof_syscall_enter);
+	sys_perf_refcount_enter--;
+	clear_bit(num, enabled_perf_enter_syscalls);
+	if (!sys_perf_refcount_enter)
+		unregister_trace_sys_enter(perf_syscall_enter);
 	mutex_unlock(&syscall_trace_lock);
 }
 
-static void prof_syscall_exit(struct pt_regs *regs, long ret)
+static void perf_syscall_exit(struct pt_regs *regs, long ret)
 {
 	struct syscall_metadata *sys_data;
 	struct syscall_trace_exit *rec;
@@ -515,7 +515,7 @@ static void prof_syscall_exit(struct pt_regs *regs, long ret)
 	int size;
 
 	syscall_nr = syscall_get_nr(current, regs);
-	if (!test_bit(syscall_nr, enabled_prof_exit_syscalls))
+	if (!test_bit(syscall_nr, enabled_perf_exit_syscalls))
 		return;
 
 	sys_data = syscall_nr_to_meta(syscall_nr);
@@ -530,11 +530,11 @@ static void prof_syscall_exit(struct pt_regs *regs, long ret)
 	 * Impossible, but be paranoid with the future
 	 * How to put this check outside runtime?
 	 */
-	if (WARN_ONCE(size > FTRACE_MAX_PROFILE_SIZE,
-		"exit event has grown above profile buffer size"))
+	if (WARN_ONCE(size > PERF_MAX_TRACE_SIZE,
+		"exit event has grown above perf buffer size"))
 		return;
 
-	rec = (struct syscall_trace_exit *)ftrace_perf_buf_prepare(size,
+	rec = (struct syscall_trace_exit *)perf_trace_buf_prepare(size,
 				sys_data->exit_event->id, &rctx, &flags);
 	if (!rec)
 		return;
@@ -542,10 +542,10 @@ static void prof_syscall_exit(struct pt_regs *regs, long ret)
 	rec->nr = syscall_nr;
 	rec->ret = syscall_get_return_value(current, regs);
 
-	ftrace_perf_buf_submit(rec, size, rctx, 0, 1, flags);
+	perf_trace_buf_submit(rec, size, rctx, 0, 1, flags, regs);
 }
 
-int prof_sysexit_enable(struct ftrace_event_call *call)
+int perf_sysexit_enable(struct ftrace_event_call *call)
 {
 	int ret = 0;
 	int num;
@@ -553,30 +553,30 @@ int prof_sysexit_enable(struct ftrace_event_call *call)
 	num = ((struct syscall_metadata *)call->data)->syscall_nr;
 
 	mutex_lock(&syscall_trace_lock);
-	if (!sys_prof_refcount_exit)
-		ret = register_trace_sys_exit(prof_syscall_exit);
+	if (!sys_perf_refcount_exit)
+		ret = register_trace_sys_exit(perf_syscall_exit);
 	if (ret) {
 		pr_info("event trace: Could not activate"
 				"syscall exit trace point");
 	} else {
-		set_bit(num, enabled_prof_exit_syscalls);
-		sys_prof_refcount_exit++;
+		set_bit(num, enabled_perf_exit_syscalls);
+		sys_perf_refcount_exit++;
 	}
 	mutex_unlock(&syscall_trace_lock);
 	return ret;
 }
 
-void prof_sysexit_disable(struct ftrace_event_call *call)
+void perf_sysexit_disable(struct ftrace_event_call *call)
 {
 	int num;
 
 	num = ((struct syscall_metadata *)call->data)->syscall_nr;
 
 	mutex_lock(&syscall_trace_lock);
-	sys_prof_refcount_exit--;
-	clear_bit(num, enabled_prof_exit_syscalls);
-	if (!sys_prof_refcount_exit)
-		unregister_trace_sys_exit(prof_syscall_exit);
+	sys_perf_refcount_exit--;
+	clear_bit(num, enabled_perf_exit_syscalls);
+	if (!sys_perf_refcount_exit)
+		unregister_trace_sys_exit(perf_syscall_exit);
 	mutex_unlock(&syscall_trace_lock);
 }
 
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index b520ec1f33c5..8e5ec5e1ab91 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -532,6 +532,14 @@ config LOCK_STAT
 
 	 For more details, see Documentation/lockstat.txt
 
+	 This also enables lock events required by "perf lock",
+	 subcommand of perf.
+	 If you want to use "perf lock", you also need to turn on
+	 CONFIG_EVENT_TRACING.
+
+	 CONFIG_LOCK_STAT defines "contended" and "acquired" lock events.
+	 (CONFIG_LOCKDEP defines "acquire" and "release" events.)
+
 config DEBUG_LOCKDEP
 	bool "Lock dependency engine debugging"
 	depends on DEBUG_KERNEL && LOCKDEP
diff --git a/lib/kobject.c b/lib/kobject.c
index b512b746d2af..8115eb1bbf4d 100644
--- a/lib/kobject.c
+++ b/lib/kobject.c
@@ -700,7 +700,7 @@ static ssize_t kobj_attr_store(struct kobject *kobj, struct attribute *attr,
 	return ret;
 }
 
-struct sysfs_ops kobj_sysfs_ops = {
+const struct sysfs_ops kobj_sysfs_ops = {
 	.show	= kobj_attr_show,
 	.store	= kobj_attr_store,
 };
@@ -789,7 +789,7 @@ static struct kobj_type kset_ktype = {
  * If the kset was not able to be created, NULL will be returned.
  */
 static struct kset *kset_create(const char *name,
-				struct kset_uevent_ops *uevent_ops,
+				const struct kset_uevent_ops *uevent_ops,
 				struct kobject *parent_kobj)
 {
 	struct kset *kset;
@@ -832,7 +832,7 @@ static struct kset *kset_create(const char *name,
  * If the kset was not able to be created, NULL will be returned.
  */
 struct kset *kset_create_and_add(const char *name,
-				 struct kset_uevent_ops *uevent_ops,
+				 const struct kset_uevent_ops *uevent_ops,
 				 struct kobject *parent_kobj)
 {
 	struct kset *kset;
diff --git a/lib/kobject_uevent.c b/lib/kobject_uevent.c
index 920a3ca6e259..c9d3a3e8405d 100644
--- a/lib/kobject_uevent.c
+++ b/lib/kobject_uevent.c
@@ -95,7 +95,7 @@ int kobject_uevent_env(struct kobject *kobj, enum kobject_action action,
 	const char *subsystem;
 	struct kobject *top_kobj;
 	struct kset *kset;
-	struct kset_uevent_ops *uevent_ops;
+	const struct kset_uevent_ops *uevent_ops;
 	u64 seq;
 	int i = 0;
 	int retval = 0;
diff --git a/lib/vsprintf.c b/lib/vsprintf.c
index 0d461c7c14db..24112e5a5780 100644
--- a/lib/vsprintf.c
+++ b/lib/vsprintf.c
@@ -609,6 +609,12 @@ static char *resource_string(char *buf, char *end, struct resource *res,
 		.precision = -1,
 		.flags = SPECIAL | SMALL | ZEROPAD,
 	};
+	static const struct printf_spec bus_spec = {
+		.base = 16,
+		.field_width = 2,
+		.precision = -1,
+		.flags = SMALL | ZEROPAD,
+	};
 	static const struct printf_spec dec_spec = {
 		.base = 10,
 		.precision = -1,
@@ -629,7 +635,7 @@ static char *resource_string(char *buf, char *end, struct resource *res,
 	 * 64-bit res (sizeof==8): 20 chars in dec, 18 in hex ("0x" + 16) */
 #define RSRC_BUF_SIZE		((2 * sizeof(resource_size_t)) + 4)
 #define FLAG_BUF_SIZE		(2 * sizeof(res->flags))
-#define DECODED_BUF_SIZE	sizeof("[mem - 64bit pref disabled]")
+#define DECODED_BUF_SIZE	sizeof("[mem - 64bit pref window disabled]")
 #define RAW_BUF_SIZE		sizeof("[mem - flags 0x]")
 	char sym[max(2*RSRC_BUF_SIZE + DECODED_BUF_SIZE,
 		     2*RSRC_BUF_SIZE + FLAG_BUF_SIZE + RAW_BUF_SIZE)];
@@ -651,6 +657,9 @@ static char *resource_string(char *buf, char *end, struct resource *res,
 	} else if (res->flags & IORESOURCE_DMA) {
 		p = string(p, pend, "dma ", str_spec);
 		specp = &dec_spec;
+	} else if (res->flags & IORESOURCE_BUS) {
+		p = string(p, pend, "bus ", str_spec);
+		specp = &bus_spec;
 	} else {
 		p = string(p, pend, "??? ", str_spec);
 		specp = &mem_spec;
@@ -666,6 +675,8 @@ static char *resource_string(char *buf, char *end, struct resource *res,
 			p = string(p, pend, " 64bit", str_spec);
 		if (res->flags & IORESOURCE_PREFETCH)
 			p = string(p, pend, " pref", str_spec);
+		if (res->flags & IORESOURCE_WINDOW)
+			p = string(p, pend, " window", str_spec);
 		if (res->flags & IORESOURCE_DISABLED)
 			p = string(p, pend, " disabled", str_spec);
 	} else {
diff --git a/lib/zlib_inflate/inffast.c b/lib/zlib_inflate/inffast.c
index 215447c55261..2c13ecc5bb2c 100644
--- a/lib/zlib_inflate/inffast.c
+++ b/lib/zlib_inflate/inffast.c
@@ -8,21 +8,6 @@
 #include "inflate.h"
 #include "inffast.h"
 
-/* Only do the unaligned "Faster" variant when
- * CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is set
- *
- * On powerpc, it won't be as we don't include autoconf.h
- * automatically for the boot wrapper, which is intended as
- * we run in an environment where we may not be able to deal
- * with (even rare) alignment faults. In addition, we do not
- * define __KERNEL__ for arch/powerpc/boot unlike x86
- */
-
-#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
-#include <asm/unaligned.h>
-#include <asm/byteorder.h>
-#endif
-
 #ifndef ASMINF
 
 /* Allow machine dependent optimization for post-increment or pre-increment.
@@ -36,14 +21,31 @@
    - Pentium III (Anderson)
    - M68060 (Nikl)
  */
+union uu {
+	unsigned short us;
+	unsigned char b[2];
+};
+
+/* Endian independed version */
+static inline unsigned short
+get_unaligned16(const unsigned short *p)
+{
+	union uu  mm;
+	unsigned char *b = (unsigned char *)p;
+
+	mm.b[0] = b[0];
+	mm.b[1] = b[1];
+	return mm.us;
+}
+
 #ifdef POSTINC
 #  define OFF 0
 #  define PUP(a) *(a)++
-#  define UP_UNALIGNED(a) get_unaligned((a)++)
+#  define UP_UNALIGNED(a) get_unaligned16((a)++)
 #else
 #  define OFF 1
 #  define PUP(a) *++(a)
-#  define UP_UNALIGNED(a) get_unaligned(++(a))
+#  define UP_UNALIGNED(a) get_unaligned16(++(a))
 #endif
 
 /*
@@ -256,7 +258,6 @@ void inflate_fast(z_streamp strm, unsigned start)
                     }
                 }
                 else {
-#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
 		    unsigned short *sout;
 		    unsigned long loops;
 
@@ -274,22 +275,25 @@ void inflate_fast(z_streamp strm, unsigned start)
 			sfrom = (unsigned short *)(from - OFF);
 			loops = len >> 1;
 			do
+#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+			    PUP(sout) = PUP(sfrom);
+#else
 			    PUP(sout) = UP_UNALIGNED(sfrom);
+#endif
 			while (--loops);
 			out = (unsigned char *)sout + OFF;
 			from = (unsigned char *)sfrom + OFF;
 		    } else { /* dist == 1 or dist == 2 */
 			unsigned short pat16;
 
-			pat16 = *(sout-2+2*OFF);
-			if (dist == 1)
-#if defined(__BIG_ENDIAN)
-			    pat16 = (pat16 & 0xff) | ((pat16 & 0xff) << 8);
-#elif defined(__LITTLE_ENDIAN)
-			    pat16 = (pat16 & 0xff00) | ((pat16 & 0xff00) >> 8);
-#else
-#error __BIG_ENDIAN nor __LITTLE_ENDIAN is defined
-#endif
+			pat16 = *(sout-1+OFF);
+			if (dist == 1) {
+				union uu mm;
+				/* copy one char pattern to both bytes */
+				mm.us = pat16;
+				mm.b[0] = mm.b[1];
+				pat16 = mm.us;
+			}
 			loops = len >> 1;
 			do
 			    PUP(sout) = pat16;
@@ -298,20 +302,6 @@ void inflate_fast(z_streamp strm, unsigned start)
 		    }
 		    if (len & 1)
 			PUP(out) = PUP(from);
-#else /* CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS */
-                    from = out - dist;          /* copy direct from output */
-                    do {                        /* minimum length is three */
-			 PUP(out) = PUP(from);
-			 PUP(out) = PUP(from);
-			 PUP(out) = PUP(from);
-			 len -= 3;
-                    } while (len > 2);
-                    if (len) {
-			 PUP(out) = PUP(from);
-			 if (len > 1)
-			     PUP(out) = PUP(from);
-                    }
-#endif /* !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS */
                 }
             }
             else if ((op & 64) == 0) {          /* 2nd level distance code */
diff --git a/mm/highmem.c b/mm/highmem.c
index 9c1e627f282e..bed8a8bfd01f 100644
--- a/mm/highmem.c
+++ b/mm/highmem.c
@@ -220,7 +220,7 @@ EXPORT_SYMBOL(kmap_high);
  * @page: &struct page to pin
  *
  * Returns the page's current virtual memory address, or NULL if no mapping
- * exists.  When and only when a non null address is returned then a
+ * exists.  If and only if a non null address is returned then a
  * matching call to kunmap_high() is necessary.
  *
  * This can be called from any context.
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index d813823ab08f..7973b5221fb8 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -6,6 +6,10 @@
  * Copyright 2007 OpenVZ SWsoft Inc
  * Author: Pavel Emelianov <xemul@openvz.org>
  *
+ * Memory thresholds
+ * Copyright (C) 2009 Nokia Corporation
+ * Author: Kirill A. Shutemov
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -21,6 +25,7 @@
 #include <linux/memcontrol.h>
 #include <linux/cgroup.h>
 #include <linux/mm.h>
+#include <linux/hugetlb.h>
 #include <linux/pagemap.h>
 #include <linux/smp.h>
 #include <linux/page-flags.h>
@@ -32,7 +37,10 @@
 #include <linux/rbtree.h>
 #include <linux/slab.h>
 #include <linux/swap.h>
+#include <linux/swapops.h>
 #include <linux/spinlock.h>
+#include <linux/eventfd.h>
+#include <linux/sort.h>
 #include <linux/fs.h>
 #include <linux/seq_file.h>
 #include <linux/vmalloc.h>
@@ -55,7 +63,15 @@ static int really_do_swap_account __initdata = 1; /* for remember boot option*/
 #define do_swap_account		(0)
 #endif
 
-#define SOFTLIMIT_EVENTS_THRESH (1000)
+/*
+ * Per memcg event counter is incremented at every pagein/pageout. This counter
+ * is used for trigger some periodic events. This is straightforward and better
+ * than using jiffies etc. to handle periodic memcg event.
+ *
+ * These values will be used as !((event) & ((1 <<(thresh)) - 1))
+ */
+#define THRESHOLDS_EVENTS_THRESH (7) /* once in 128 */
+#define SOFTLIMIT_EVENTS_THRESH (10) /* once in 1024 */
 
 /*
  * Statistics for memory cgroup.
@@ -69,62 +85,16 @@ enum mem_cgroup_stat_index {
 	MEM_CGROUP_STAT_FILE_MAPPED,  /* # of pages charged as file rss */
 	MEM_CGROUP_STAT_PGPGIN_COUNT,	/* # of pages paged in */
 	MEM_CGROUP_STAT_PGPGOUT_COUNT,	/* # of pages paged out */
-	MEM_CGROUP_STAT_EVENTS,	/* sum of pagein + pageout for internal use */
 	MEM_CGROUP_STAT_SWAPOUT, /* # of pages, swapped out */
+	MEM_CGROUP_EVENTS,	/* incremented at every  pagein/pageout */
 
 	MEM_CGROUP_STAT_NSTATS,
 };
 
 struct mem_cgroup_stat_cpu {
 	s64 count[MEM_CGROUP_STAT_NSTATS];
-} ____cacheline_aligned_in_smp;
-
-struct mem_cgroup_stat {
-	struct mem_cgroup_stat_cpu cpustat[0];
 };
 
-static inline void
-__mem_cgroup_stat_reset_safe(struct mem_cgroup_stat_cpu *stat,
-				enum mem_cgroup_stat_index idx)
-{
-	stat->count[idx] = 0;
-}
-
-static inline s64
-__mem_cgroup_stat_read_local(struct mem_cgroup_stat_cpu *stat,
-				enum mem_cgroup_stat_index idx)
-{
-	return stat->count[idx];
-}
-
-/*
- * For accounting under irq disable, no need for increment preempt count.
- */
-static inline void __mem_cgroup_stat_add_safe(struct mem_cgroup_stat_cpu *stat,
-		enum mem_cgroup_stat_index idx, int val)
-{
-	stat->count[idx] += val;
-}
-
-static s64 mem_cgroup_read_stat(struct mem_cgroup_stat *stat,
-		enum mem_cgroup_stat_index idx)
-{
-	int cpu;
-	s64 ret = 0;
-	for_each_possible_cpu(cpu)
-		ret += stat->cpustat[cpu].count[idx];
-	return ret;
-}
-
-static s64 mem_cgroup_local_usage(struct mem_cgroup_stat *stat)
-{
-	s64 ret;
-
-	ret = mem_cgroup_read_stat(stat, MEM_CGROUP_STAT_CACHE);
-	ret += mem_cgroup_read_stat(stat, MEM_CGROUP_STAT_RSS);
-	return ret;
-}
-
 /*
  * per-zone information in memory controller.
  */
@@ -174,6 +144,22 @@ struct mem_cgroup_tree {
 
 static struct mem_cgroup_tree soft_limit_tree __read_mostly;
 
+struct mem_cgroup_threshold {
+	struct eventfd_ctx *eventfd;
+	u64 threshold;
+};
+
+struct mem_cgroup_threshold_ary {
+	/* An array index points to threshold just below usage. */
+	atomic_t current_threshold;
+	/* Size of entries[] */
+	unsigned int size;
+	/* Array of thresholds */
+	struct mem_cgroup_threshold entries[0];
+};
+
+static void mem_cgroup_threshold(struct mem_cgroup *mem);
+
 /*
  * The memory controller data structure. The memory controller controls both
  * page cache and RSS per cgroup. We would eventually like to provide
@@ -217,7 +203,7 @@ struct mem_cgroup {
 	 * Should the accounting and control be hierarchical, per subtree?
 	 */
 	bool use_hierarchy;
-	unsigned long	last_oom_jiffies;
+	atomic_t	oom_lock;
 	atomic_t	refcnt;
 
 	unsigned int	swappiness;
@@ -225,10 +211,48 @@ struct mem_cgroup {
 	/* set when res.limit == memsw.limit */
 	bool		memsw_is_minimum;
 
+	/* protect arrays of thresholds */
+	struct mutex thresholds_lock;
+
+	/* thresholds for memory usage. RCU-protected */
+	struct mem_cgroup_threshold_ary *thresholds;
+
+	/* thresholds for mem+swap usage. RCU-protected */
+	struct mem_cgroup_threshold_ary *memsw_thresholds;
+
 	/*
-	 * statistics. This must be placed at the end of memcg.
+	 * Should we move charges of a task when a task is moved into this
+	 * mem_cgroup ? And what type of charges should we move ?
 	 */
-	struct mem_cgroup_stat stat;
+	unsigned long 	move_charge_at_immigrate;
+
+	/*
+	 * percpu counter.
+	 */
+	struct mem_cgroup_stat_cpu *stat;
+};
+
+/* Stuffs for move charges at task migration. */
+/*
+ * Types of charges to be moved. "move_charge_at_immitgrate" is treated as a
+ * left-shifted bitmap of these types.
+ */
+enum move_type {
+	MOVE_CHARGE_TYPE_ANON,	/* private anonymous page and swap of it */
+	NR_MOVE_TYPE,
+};
+
+/* "mc" and its members are protected by cgroup_mutex */
+static struct move_charge_struct {
+	struct mem_cgroup *from;
+	struct mem_cgroup *to;
+	unsigned long precharge;
+	unsigned long moved_charge;
+	unsigned long moved_swap;
+	struct task_struct *moving_task;	/* a task moving charges */
+	wait_queue_head_t waitq;		/* a waitq for other context */
+} mc = {
+	.waitq = __WAIT_QUEUE_HEAD_INITIALIZER(mc.waitq),
 };
 
 /*
@@ -371,23 +395,6 @@ mem_cgroup_remove_exceeded(struct mem_cgroup *mem,
 	spin_unlock(&mctz->lock);
 }
 
-static bool mem_cgroup_soft_limit_check(struct mem_cgroup *mem)
-{
-	bool ret = false;
-	int cpu;
-	s64 val;
-	struct mem_cgroup_stat_cpu *cpustat;
-
-	cpu = get_cpu();
-	cpustat = &mem->stat.cpustat[cpu];
-	val = __mem_cgroup_stat_read_local(cpustat, MEM_CGROUP_STAT_EVENTS);
-	if (unlikely(val > SOFTLIMIT_EVENTS_THRESH)) {
-		__mem_cgroup_stat_reset_safe(cpustat, MEM_CGROUP_STAT_EVENTS);
-		ret = true;
-	}
-	put_cpu();
-	return ret;
-}
 
 static void mem_cgroup_update_tree(struct mem_cgroup *mem, struct page *page)
 {
@@ -481,17 +488,31 @@ mem_cgroup_largest_soft_limit_node(struct mem_cgroup_tree_per_zone *mctz)
 	return mz;
 }
 
+static s64 mem_cgroup_read_stat(struct mem_cgroup *mem,
+		enum mem_cgroup_stat_index idx)
+{
+	int cpu;
+	s64 val = 0;
+
+	for_each_possible_cpu(cpu)
+		val += per_cpu(mem->stat->count[idx], cpu);
+	return val;
+}
+
+static s64 mem_cgroup_local_usage(struct mem_cgroup *mem)
+{
+	s64 ret;
+
+	ret = mem_cgroup_read_stat(mem, MEM_CGROUP_STAT_RSS);
+	ret += mem_cgroup_read_stat(mem, MEM_CGROUP_STAT_CACHE);
+	return ret;
+}
+
 static void mem_cgroup_swap_statistics(struct mem_cgroup *mem,
 					 bool charge)
 {
 	int val = (charge) ? 1 : -1;
-	struct mem_cgroup_stat *stat = &mem->stat;
-	struct mem_cgroup_stat_cpu *cpustat;
-	int cpu = get_cpu();
-
-	cpustat = &stat->cpustat[cpu];
-	__mem_cgroup_stat_add_safe(cpustat, MEM_CGROUP_STAT_SWAPOUT, val);
-	put_cpu();
+	this_cpu_add(mem->stat->count[MEM_CGROUP_STAT_SWAPOUT], val);
 }
 
 static void mem_cgroup_charge_statistics(struct mem_cgroup *mem,
@@ -499,24 +520,21 @@ static void mem_cgroup_charge_statistics(struct mem_cgroup *mem,
 					 bool charge)
 {
 	int val = (charge) ? 1 : -1;
-	struct mem_cgroup_stat *stat = &mem->stat;
-	struct mem_cgroup_stat_cpu *cpustat;
-	int cpu = get_cpu();
 
-	cpustat = &stat->cpustat[cpu];
+	preempt_disable();
+
 	if (PageCgroupCache(pc))
-		__mem_cgroup_stat_add_safe(cpustat, MEM_CGROUP_STAT_CACHE, val);
+		__this_cpu_add(mem->stat->count[MEM_CGROUP_STAT_CACHE], val);
 	else
-		__mem_cgroup_stat_add_safe(cpustat, MEM_CGROUP_STAT_RSS, val);
+		__this_cpu_add(mem->stat->count[MEM_CGROUP_STAT_RSS], val);
 
 	if (charge)
-		__mem_cgroup_stat_add_safe(cpustat,
-				MEM_CGROUP_STAT_PGPGIN_COUNT, 1);
+		__this_cpu_inc(mem->stat->count[MEM_CGROUP_STAT_PGPGIN_COUNT]);
 	else
-		__mem_cgroup_stat_add_safe(cpustat,
-				MEM_CGROUP_STAT_PGPGOUT_COUNT, 1);
-	__mem_cgroup_stat_add_safe(cpustat, MEM_CGROUP_STAT_EVENTS, 1);
-	put_cpu();
+		__this_cpu_inc(mem->stat->count[MEM_CGROUP_STAT_PGPGOUT_COUNT]);
+	__this_cpu_inc(mem->stat->count[MEM_CGROUP_EVENTS]);
+
+	preempt_enable();
 }
 
 static unsigned long mem_cgroup_get_local_zonestat(struct mem_cgroup *mem,
@@ -534,6 +552,29 @@ static unsigned long mem_cgroup_get_local_zonestat(struct mem_cgroup *mem,
 	return total;
 }
 
+static bool __memcg_event_check(struct mem_cgroup *mem, int event_mask_shift)
+{
+	s64 val;
+
+	val = this_cpu_read(mem->stat->count[MEM_CGROUP_EVENTS]);
+
+	return !(val & ((1 << event_mask_shift) - 1));
+}
+
+/*
+ * Check events in order.
+ *
+ */
+static void memcg_check_events(struct mem_cgroup *mem, struct page *page)
+{
+	/* threshold event is triggered in finer grain than soft limit */
+	if (unlikely(__memcg_event_check(mem, THRESHOLDS_EVENTS_THRESH))) {
+		mem_cgroup_threshold(mem);
+		if (unlikely(__memcg_event_check(mem, SOFTLIMIT_EVENTS_THRESH)))
+			mem_cgroup_update_tree(mem, page);
+	}
+}
+
 static struct mem_cgroup *mem_cgroup_from_cont(struct cgroup *cont)
 {
 	return container_of(cgroup_subsys_state(cont,
@@ -1000,7 +1041,7 @@ static int mem_cgroup_count_children_cb(struct mem_cgroup *mem, void *data)
 }
 
 /**
- * mem_cgroup_print_mem_info: Called from OOM with tasklist_lock held in read mode.
+ * mem_cgroup_print_oom_info: Called from OOM with tasklist_lock held in read mode.
  * @memcg: The memory cgroup that went over limit
  * @p: Task that is going to be killed
  *
@@ -1174,7 +1215,7 @@ static int mem_cgroup_hierarchical_reclaim(struct mem_cgroup *root_mem,
 				}
 			}
 		}
-		if (!mem_cgroup_local_usage(&victim->stat)) {
+		if (!mem_cgroup_local_usage(victim)) {
 			/* this cgroup's local usage == 0 */
 			css_put(&victim->css);
 			continue;
@@ -1205,32 +1246,102 @@ static int mem_cgroup_hierarchical_reclaim(struct mem_cgroup *root_mem,
 	return total;
 }
 
-bool mem_cgroup_oom_called(struct task_struct *task)
+static int mem_cgroup_oom_lock_cb(struct mem_cgroup *mem, void *data)
 {
-	bool ret = false;
-	struct mem_cgroup *mem;
-	struct mm_struct *mm;
+	int *val = (int *)data;
+	int x;
+	/*
+	 * Logically, we can stop scanning immediately when we find
+	 * a memcg is already locked. But condidering unlock ops and
+	 * creation/removal of memcg, scan-all is simple operation.
+	 */
+	x = atomic_inc_return(&mem->oom_lock);
+	*val = max(x, *val);
+	return 0;
+}
+/*
+ * Check OOM-Killer is already running under our hierarchy.
+ * If someone is running, return false.
+ */
+static bool mem_cgroup_oom_lock(struct mem_cgroup *mem)
+{
+	int lock_count = 0;
 
-	rcu_read_lock();
-	mm = task->mm;
-	if (!mm)
-		mm = &init_mm;
-	mem = mem_cgroup_from_task(rcu_dereference(mm->owner));
-	if (mem && time_before(jiffies, mem->last_oom_jiffies + HZ/10))
-		ret = true;
-	rcu_read_unlock();
-	return ret;
+	mem_cgroup_walk_tree(mem, &lock_count, mem_cgroup_oom_lock_cb);
+
+	if (lock_count == 1)
+		return true;
+	return false;
 }
 
-static int record_last_oom_cb(struct mem_cgroup *mem, void *data)
+static int mem_cgroup_oom_unlock_cb(struct mem_cgroup *mem, void *data)
 {
-	mem->last_oom_jiffies = jiffies;
+	/*
+	 * When a new child is created while the hierarchy is under oom,
+	 * mem_cgroup_oom_lock() may not be called. We have to use
+	 * atomic_add_unless() here.
+	 */
+	atomic_add_unless(&mem->oom_lock, -1, 0);
 	return 0;
 }
 
-static void record_last_oom(struct mem_cgroup *mem)
+static void mem_cgroup_oom_unlock(struct mem_cgroup *mem)
 {
-	mem_cgroup_walk_tree(mem, NULL, record_last_oom_cb);
+	mem_cgroup_walk_tree(mem, NULL,	mem_cgroup_oom_unlock_cb);
+}
+
+static DEFINE_MUTEX(memcg_oom_mutex);
+static DECLARE_WAIT_QUEUE_HEAD(memcg_oom_waitq);
+
+/*
+ * try to call OOM killer. returns false if we should exit memory-reclaim loop.
+ */
+bool mem_cgroup_handle_oom(struct mem_cgroup *mem, gfp_t mask)
+{
+	DEFINE_WAIT(wait);
+	bool locked;
+
+	/* At first, try to OOM lock hierarchy under mem.*/
+	mutex_lock(&memcg_oom_mutex);
+	locked = mem_cgroup_oom_lock(mem);
+	/*
+	 * Even if signal_pending(), we can't quit charge() loop without
+	 * accounting. So, UNINTERRUPTIBLE is appropriate. But SIGKILL
+	 * under OOM is always welcomed, use TASK_KILLABLE here.
+	 */
+	if (!locked)
+		prepare_to_wait(&memcg_oom_waitq, &wait, TASK_KILLABLE);
+	mutex_unlock(&memcg_oom_mutex);
+
+	if (locked)
+		mem_cgroup_out_of_memory(mem, mask);
+	else {
+		schedule();
+		finish_wait(&memcg_oom_waitq, &wait);
+	}
+	mutex_lock(&memcg_oom_mutex);
+	mem_cgroup_oom_unlock(mem);
+	/*
+	 * Here, we use global waitq .....more fine grained waitq ?
+	 * Assume following hierarchy.
+	 * A/
+	 *   01
+	 *   02
+	 * assume OOM happens both in A and 01 at the same time. Tthey are
+	 * mutually exclusive by lock. (kill in 01 helps A.)
+	 * When we use per memcg waitq, we have to wake up waiters on A and 02
+	 * in addtion to waiters on 01. We use global waitq for avoiding mess.
+	 * It will not be a big problem.
+	 * (And a task may be moved to other groups while it's waiting for OOM.)
+	 */
+	wake_up_all(&memcg_oom_waitq);
+	mutex_unlock(&memcg_oom_mutex);
+
+	if (test_thread_flag(TIF_MEMDIE) || fatal_signal_pending(current))
+		return false;
+	/* Give chance to dying process */
+	schedule_timeout(1);
+	return true;
 }
 
 /*
@@ -1240,9 +1351,6 @@ static void record_last_oom(struct mem_cgroup *mem)
 void mem_cgroup_update_file_mapped(struct page *page, int val)
 {
 	struct mem_cgroup *mem;
-	struct mem_cgroup_stat *stat;
-	struct mem_cgroup_stat_cpu *cpustat;
-	int cpu;
 	struct page_cgroup *pc;
 
 	pc = lookup_page_cgroup(page);
@@ -1258,13 +1366,10 @@ void mem_cgroup_update_file_mapped(struct page *page, int val)
 		goto done;
 
 	/*
-	 * Preemption is already disabled, we don't need get_cpu()
+	 * Preemption is already disabled. We can use __this_cpu_xxx
 	 */
-	cpu = smp_processor_id();
-	stat = &mem->stat;
-	cpustat = &stat->cpustat[cpu];
+	__this_cpu_add(mem->stat->count[MEM_CGROUP_STAT_FILE_MAPPED], val);
 
-	__mem_cgroup_stat_add_safe(cpustat, MEM_CGROUP_STAT_FILE_MAPPED, val);
 done:
 	unlock_page_cgroup(pc);
 }
@@ -1401,19 +1506,21 @@ static int __cpuinit memcg_stock_cpu_callback(struct notifier_block *nb,
  * oom-killer can be invoked.
  */
 static int __mem_cgroup_try_charge(struct mm_struct *mm,
-			gfp_t gfp_mask, struct mem_cgroup **memcg,
-			bool oom, struct page *page)
+			gfp_t gfp_mask, struct mem_cgroup **memcg, bool oom)
 {
 	struct mem_cgroup *mem, *mem_over_limit;
 	int nr_retries = MEM_CGROUP_RECLAIM_RETRIES;
 	struct res_counter *fail_res;
 	int csize = CHARGE_SIZE;
 
-	if (unlikely(test_thread_flag(TIF_MEMDIE))) {
-		/* Don't account this! */
-		*memcg = NULL;
-		return 0;
-	}
+	/*
+	 * Unlike gloval-vm's OOM-kill, we're not in memory shortage
+	 * in system level. So, allow to go ahead dying process in addition to
+	 * MEMDIE process.
+	 */
+	if (unlikely(test_thread_flag(TIF_MEMDIE)
+		     || fatal_signal_pending(current)))
+		goto bypass;
 
 	/*
 	 * We always charge the cgroup the mm_struct belongs to.
@@ -1440,7 +1547,7 @@ static int __mem_cgroup_try_charge(struct mm_struct *mm,
 		unsigned long flags = 0;
 
 		if (consume_stock(mem))
-			goto charged;
+			goto done;
 
 		ret = res_counter_charge(&mem->res, csize, &fail_res);
 		if (likely(!ret)) {
@@ -1483,28 +1590,70 @@ static int __mem_cgroup_try_charge(struct mm_struct *mm,
 		if (mem_cgroup_check_under_limit(mem_over_limit))
 			continue;
 
+		/* try to avoid oom while someone is moving charge */
+		if (mc.moving_task && current != mc.moving_task) {
+			struct mem_cgroup *from, *to;
+			bool do_continue = false;
+			/*
+			 * There is a small race that "from" or "to" can be
+			 * freed by rmdir, so we use css_tryget().
+			 */
+			rcu_read_lock();
+			from = mc.from;
+			to = mc.to;
+			if (from && css_tryget(&from->css)) {
+				if (mem_over_limit->use_hierarchy)
+					do_continue = css_is_ancestor(
+							&from->css,
+							&mem_over_limit->css);
+				else
+					do_continue = (from == mem_over_limit);
+				css_put(&from->css);
+			}
+			if (!do_continue && to && css_tryget(&to->css)) {
+				if (mem_over_limit->use_hierarchy)
+					do_continue = css_is_ancestor(
+							&to->css,
+							&mem_over_limit->css);
+				else
+					do_continue = (to == mem_over_limit);
+				css_put(&to->css);
+			}
+			rcu_read_unlock();
+			if (do_continue) {
+				DEFINE_WAIT(wait);
+				prepare_to_wait(&mc.waitq, &wait,
+							TASK_INTERRUPTIBLE);
+				/* moving charge context might have finished. */
+				if (mc.moving_task)
+					schedule();
+				finish_wait(&mc.waitq, &wait);
+				continue;
+			}
+		}
+
 		if (!nr_retries--) {
-			if (oom) {
-				mem_cgroup_out_of_memory(mem_over_limit, gfp_mask);
-				record_last_oom(mem_over_limit);
+			if (!oom)
+				goto nomem;
+			if (mem_cgroup_handle_oom(mem_over_limit, gfp_mask)) {
+				nr_retries = MEM_CGROUP_RECLAIM_RETRIES;
+				continue;
 			}
-			goto nomem;
+			/* When we reach here, current task is dying .*/
+			css_put(&mem->css);
+			goto bypass;
 		}
 	}
 	if (csize > PAGE_SIZE)
 		refill_stock(mem, csize - PAGE_SIZE);
-charged:
-	/*
-	 * Insert ancestor (and ancestor's ancestors), to softlimit RB-tree.
-	 * if they exceeds softlimit.
-	 */
-	if (mem_cgroup_soft_limit_check(mem))
-		mem_cgroup_update_tree(mem, page);
 done:
 	return 0;
 nomem:
 	css_put(&mem->css);
 	return -ENOMEM;
+bypass:
+	*memcg = NULL;
+	return 0;
 }
 
 /*
@@ -1512,14 +1661,23 @@ nomem:
  * This function is for that and do uncharge, put css's refcnt.
  * gotten by try_charge().
  */
-static void mem_cgroup_cancel_charge(struct mem_cgroup *mem)
+static void __mem_cgroup_cancel_charge(struct mem_cgroup *mem,
+							unsigned long count)
 {
 	if (!mem_cgroup_is_root(mem)) {
-		res_counter_uncharge(&mem->res, PAGE_SIZE);
+		res_counter_uncharge(&mem->res, PAGE_SIZE * count);
 		if (do_swap_account)
-			res_counter_uncharge(&mem->memsw, PAGE_SIZE);
+			res_counter_uncharge(&mem->memsw, PAGE_SIZE * count);
+		VM_BUG_ON(test_bit(CSS_ROOT, &mem->css.flags));
+		WARN_ON_ONCE(count > INT_MAX);
+		__css_put(&mem->css, (int)count);
 	}
-	css_put(&mem->css);
+	/* we don't need css_put for root */
+}
+
+static void mem_cgroup_cancel_charge(struct mem_cgroup *mem)
+{
+	__mem_cgroup_cancel_charge(mem, 1);
 }
 
 /*
@@ -1615,6 +1773,12 @@ static void __mem_cgroup_commit_charge(struct mem_cgroup *mem,
 	mem_cgroup_charge_statistics(mem, pc, true);
 
 	unlock_page_cgroup(pc);
+	/*
+	 * "charge_statistics" updated event counter. Then, check it.
+	 * Insert ancestor (and ancestor's ancestors), to softlimit RB-tree.
+	 * if they exceeds softlimit.
+	 */
+	memcg_check_events(mem, pc->page);
 }
 
 /**
@@ -1622,22 +1786,22 @@ static void __mem_cgroup_commit_charge(struct mem_cgroup *mem,
  * @pc:	page_cgroup of the page.
  * @from: mem_cgroup which the page is moved from.
  * @to:	mem_cgroup which the page is moved to. @from != @to.
+ * @uncharge: whether we should call uncharge and css_put against @from.
  *
  * The caller must confirm following.
  * - page is not on LRU (isolate_page() is useful.)
  * - the pc is locked, used, and ->mem_cgroup points to @from.
  *
- * This function does "uncharge" from old cgroup but doesn't do "charge" to
- * new cgroup. It should be done by a caller.
+ * This function doesn't do "charge" nor css_get to new cgroup. It should be
+ * done by a caller(__mem_cgroup_try_charge would be usefull). If @uncharge is
+ * true, this function does "uncharge" from old cgroup, but it doesn't if
+ * @uncharge is false, so a caller should do "uncharge".
  */
 
 static void __mem_cgroup_move_account(struct page_cgroup *pc,
-	struct mem_cgroup *from, struct mem_cgroup *to)
+	struct mem_cgroup *from, struct mem_cgroup *to, bool uncharge)
 {
 	struct page *page;
-	int cpu;
-	struct mem_cgroup_stat *stat;
-	struct mem_cgroup_stat_cpu *cpustat;
 
 	VM_BUG_ON(from == to);
 	VM_BUG_ON(PageLRU(pc->page));
@@ -1645,38 +1809,28 @@ static void __mem_cgroup_move_account(struct page_cgroup *pc,
 	VM_BUG_ON(!PageCgroupUsed(pc));
 	VM_BUG_ON(pc->mem_cgroup != from);
 
-	if (!mem_cgroup_is_root(from))
-		res_counter_uncharge(&from->res, PAGE_SIZE);
-	mem_cgroup_charge_statistics(from, pc, false);
-
 	page = pc->page;
 	if (page_mapped(page) && !PageAnon(page)) {
-		cpu = smp_processor_id();
-		/* Update mapped_file data for mem_cgroup "from" */
-		stat = &from->stat;
-		cpustat = &stat->cpustat[cpu];
-		__mem_cgroup_stat_add_safe(cpustat, MEM_CGROUP_STAT_FILE_MAPPED,
-						-1);
-
-		/* Update mapped_file data for mem_cgroup "to" */
-		stat = &to->stat;
-		cpustat = &stat->cpustat[cpu];
-		__mem_cgroup_stat_add_safe(cpustat, MEM_CGROUP_STAT_FILE_MAPPED,
-						1);
+		/* Update mapped_file data for mem_cgroup */
+		preempt_disable();
+		__this_cpu_dec(from->stat->count[MEM_CGROUP_STAT_FILE_MAPPED]);
+		__this_cpu_inc(to->stat->count[MEM_CGROUP_STAT_FILE_MAPPED]);
+		preempt_enable();
 	}
+	mem_cgroup_charge_statistics(from, pc, false);
+	if (uncharge)
+		/* This is not "cancel", but cancel_charge does all we need. */
+		mem_cgroup_cancel_charge(from);
 
-	if (do_swap_account && !mem_cgroup_is_root(from))
-		res_counter_uncharge(&from->memsw, PAGE_SIZE);
-	css_put(&from->css);
-
-	css_get(&to->css);
+	/* caller should have done css_get */
 	pc->mem_cgroup = to;
 	mem_cgroup_charge_statistics(to, pc, true);
 	/*
 	 * We charges against "to" which may not have any tasks. Then, "to"
 	 * can be under rmdir(). But in current implementation, caller of
-	 * this function is just force_empty() and it's garanteed that
-	 * "to" is never removed. So, we don't check rmdir status here.
+	 * this function is just force_empty() and move charge, so it's
+	 * garanteed that "to" is never removed. So, we don't check rmdir
+	 * status here.
 	 */
 }
 
@@ -1685,15 +1839,20 @@ static void __mem_cgroup_move_account(struct page_cgroup *pc,
  * __mem_cgroup_move_account()
  */
 static int mem_cgroup_move_account(struct page_cgroup *pc,
-				struct mem_cgroup *from, struct mem_cgroup *to)
+		struct mem_cgroup *from, struct mem_cgroup *to, bool uncharge)
 {
 	int ret = -EINVAL;
 	lock_page_cgroup(pc);
 	if (PageCgroupUsed(pc) && pc->mem_cgroup == from) {
-		__mem_cgroup_move_account(pc, from, to);
+		__mem_cgroup_move_account(pc, from, to, uncharge);
 		ret = 0;
 	}
 	unlock_page_cgroup(pc);
+	/*
+	 * check events
+	 */
+	memcg_check_events(to, pc->page);
+	memcg_check_events(from, pc->page);
 	return ret;
 }
 
@@ -1722,15 +1881,13 @@ static int mem_cgroup_move_parent(struct page_cgroup *pc,
 		goto put;
 
 	parent = mem_cgroup_from_cont(pcg);
-	ret = __mem_cgroup_try_charge(NULL, gfp_mask, &parent, false, page);
+	ret = __mem_cgroup_try_charge(NULL, gfp_mask, &parent, false);
 	if (ret || !parent)
 		goto put_back;
 
-	ret = mem_cgroup_move_account(pc, child, parent);
-	if (!ret)
-		css_put(&parent->css);	/* drop extra refcnt by try_charge() */
-	else
-		mem_cgroup_cancel_charge(parent);	/* does css_put */
+	ret = mem_cgroup_move_account(pc, child, parent, true);
+	if (ret)
+		mem_cgroup_cancel_charge(parent);
 put_back:
 	putback_lru_page(page);
 put:
@@ -1760,7 +1917,7 @@ static int mem_cgroup_charge_common(struct page *page, struct mm_struct *mm,
 	prefetchw(pc);
 
 	mem = memcg;
-	ret = __mem_cgroup_try_charge(mm, gfp_mask, &mem, true, page);
+	ret = __mem_cgroup_try_charge(mm, gfp_mask, &mem, true);
 	if (ret || !mem)
 		return ret;
 
@@ -1880,14 +2037,14 @@ int mem_cgroup_try_charge_swapin(struct mm_struct *mm,
 	if (!mem)
 		goto charge_cur_mm;
 	*ptr = mem;
-	ret = __mem_cgroup_try_charge(NULL, mask, ptr, true, page);
+	ret = __mem_cgroup_try_charge(NULL, mask, ptr, true);
 	/* drop extra refcnt from tryget */
 	css_put(&mem->css);
 	return ret;
 charge_cur_mm:
 	if (unlikely(!mm))
 		mm = &init_mm;
-	return __mem_cgroup_try_charge(mm, mask, ptr, true, page);
+	return __mem_cgroup_try_charge(mm, mask, ptr, true);
 }
 
 static void
@@ -2064,8 +2221,7 @@ __mem_cgroup_uncharge_common(struct page *page, enum charge_type ctype)
 	mz = page_cgroup_zoneinfo(pc);
 	unlock_page_cgroup(pc);
 
-	if (mem_cgroup_soft_limit_check(mem))
-		mem_cgroup_update_tree(mem, page);
+	memcg_check_events(mem, page);
 	/* at swapout, this memcg will be accessed to record to swap */
 	if (ctype != MEM_CGROUP_CHARGE_TYPE_SWAPOUT)
 		css_put(&mem->css);
@@ -2192,6 +2348,64 @@ void mem_cgroup_uncharge_swap(swp_entry_t ent)
 	}
 	rcu_read_unlock();
 }
+
+/**
+ * mem_cgroup_move_swap_account - move swap charge and swap_cgroup's record.
+ * @entry: swap entry to be moved
+ * @from:  mem_cgroup which the entry is moved from
+ * @to:  mem_cgroup which the entry is moved to
+ * @need_fixup: whether we should fixup res_counters and refcounts.
+ *
+ * It succeeds only when the swap_cgroup's record for this entry is the same
+ * as the mem_cgroup's id of @from.
+ *
+ * Returns 0 on success, -EINVAL on failure.
+ *
+ * The caller must have charged to @to, IOW, called res_counter_charge() about
+ * both res and memsw, and called css_get().
+ */
+static int mem_cgroup_move_swap_account(swp_entry_t entry,
+		struct mem_cgroup *from, struct mem_cgroup *to, bool need_fixup)
+{
+	unsigned short old_id, new_id;
+
+	old_id = css_id(&from->css);
+	new_id = css_id(&to->css);
+
+	if (swap_cgroup_cmpxchg(entry, old_id, new_id) == old_id) {
+		mem_cgroup_swap_statistics(from, false);
+		mem_cgroup_swap_statistics(to, true);
+		/*
+		 * This function is only called from task migration context now.
+		 * It postpones res_counter and refcount handling till the end
+		 * of task migration(mem_cgroup_clear_mc()) for performance
+		 * improvement. But we cannot postpone mem_cgroup_get(to)
+		 * because if the process that has been moved to @to does
+		 * swap-in, the refcount of @to might be decreased to 0.
+		 */
+		mem_cgroup_get(to);
+		if (need_fixup) {
+			if (!mem_cgroup_is_root(from))
+				res_counter_uncharge(&from->memsw, PAGE_SIZE);
+			mem_cgroup_put(from);
+			/*
+			 * we charged both to->res and to->memsw, so we should
+			 * uncharge to->res.
+			 */
+			if (!mem_cgroup_is_root(to))
+				res_counter_uncharge(&to->res, PAGE_SIZE);
+			css_put(&to->css);
+		}
+		return 0;
+	}
+	return -EINVAL;
+}
+#else
+static inline int mem_cgroup_move_swap_account(swp_entry_t entry,
+		struct mem_cgroup *from, struct mem_cgroup *to, bool need_fixup)
+{
+	return -EINVAL;
+}
 #endif
 
 /*
@@ -2216,8 +2430,7 @@ int mem_cgroup_prepare_migration(struct page *page, struct mem_cgroup **ptr)
 	unlock_page_cgroup(pc);
 
 	if (mem) {
-		ret = __mem_cgroup_try_charge(NULL, GFP_KERNEL, &mem, false,
-						page);
+		ret = __mem_cgroup_try_charge(NULL, GFP_KERNEL, &mem, false);
 		css_put(&mem->css);
 	}
 	*ptr = mem;
@@ -2704,7 +2917,7 @@ static int
 mem_cgroup_get_idx_stat(struct mem_cgroup *mem, void *data)
 {
 	struct mem_cgroup_idx_data *d = data;
-	d->val += mem_cgroup_read_stat(&mem->stat, d->idx);
+	d->val += mem_cgroup_read_stat(mem, d->idx);
 	return 0;
 }
 
@@ -2719,40 +2932,50 @@ mem_cgroup_get_recursive_idx_stat(struct mem_cgroup *mem,
 	*val = d.val;
 }
 
+static inline u64 mem_cgroup_usage(struct mem_cgroup *mem, bool swap)
+{
+	u64 idx_val, val;
+
+	if (!mem_cgroup_is_root(mem)) {
+		if (!swap)
+			return res_counter_read_u64(&mem->res, RES_USAGE);
+		else
+			return res_counter_read_u64(&mem->memsw, RES_USAGE);
+	}
+
+	mem_cgroup_get_recursive_idx_stat(mem, MEM_CGROUP_STAT_CACHE, &idx_val);
+	val = idx_val;
+	mem_cgroup_get_recursive_idx_stat(mem, MEM_CGROUP_STAT_RSS, &idx_val);
+	val += idx_val;
+
+	if (swap) {
+		mem_cgroup_get_recursive_idx_stat(mem,
+				MEM_CGROUP_STAT_SWAPOUT, &idx_val);
+		val += idx_val;
+	}
+
+	return val << PAGE_SHIFT;
+}
+
 static u64 mem_cgroup_read(struct cgroup *cont, struct cftype *cft)
 {
 	struct mem_cgroup *mem = mem_cgroup_from_cont(cont);
-	u64 idx_val, val;
+	u64 val;
 	int type, name;
 
 	type = MEMFILE_TYPE(cft->private);
 	name = MEMFILE_ATTR(cft->private);
 	switch (type) {
 	case _MEM:
-		if (name == RES_USAGE && mem_cgroup_is_root(mem)) {
-			mem_cgroup_get_recursive_idx_stat(mem,
-				MEM_CGROUP_STAT_CACHE, &idx_val);
-			val = idx_val;
-			mem_cgroup_get_recursive_idx_stat(mem,
-				MEM_CGROUP_STAT_RSS, &idx_val);
-			val += idx_val;
-			val <<= PAGE_SHIFT;
-		} else
+		if (name == RES_USAGE)
+			val = mem_cgroup_usage(mem, false);
+		else
 			val = res_counter_read_u64(&mem->res, name);
 		break;
 	case _MEMSWAP:
-		if (name == RES_USAGE && mem_cgroup_is_root(mem)) {
-			mem_cgroup_get_recursive_idx_stat(mem,
-				MEM_CGROUP_STAT_CACHE, &idx_val);
-			val = idx_val;
-			mem_cgroup_get_recursive_idx_stat(mem,
-				MEM_CGROUP_STAT_RSS, &idx_val);
-			val += idx_val;
-			mem_cgroup_get_recursive_idx_stat(mem,
-				MEM_CGROUP_STAT_SWAPOUT, &idx_val);
-			val += idx_val;
-			val <<= PAGE_SHIFT;
-		} else
+		if (name == RES_USAGE)
+			val = mem_cgroup_usage(mem, true);
+		else
 			val = res_counter_read_u64(&mem->memsw, name);
 		break;
 	default:
@@ -2865,6 +3088,39 @@ static int mem_cgroup_reset(struct cgroup *cont, unsigned int event)
 	return 0;
 }
 
+static u64 mem_cgroup_move_charge_read(struct cgroup *cgrp,
+					struct cftype *cft)
+{
+	return mem_cgroup_from_cont(cgrp)->move_charge_at_immigrate;
+}
+
+#ifdef CONFIG_MMU
+static int mem_cgroup_move_charge_write(struct cgroup *cgrp,
+					struct cftype *cft, u64 val)
+{
+	struct mem_cgroup *mem = mem_cgroup_from_cont(cgrp);
+
+	if (val >= (1 << NR_MOVE_TYPE))
+		return -EINVAL;
+	/*
+	 * We check this value several times in both in can_attach() and
+	 * attach(), so we need cgroup lock to prevent this value from being
+	 * inconsistent.
+	 */
+	cgroup_lock();
+	mem->move_charge_at_immigrate = val;
+	cgroup_unlock();
+
+	return 0;
+}
+#else
+static int mem_cgroup_move_charge_write(struct cgroup *cgrp,
+					struct cftype *cft, u64 val)
+{
+	return -ENOSYS;
+}
+#endif
+
 
 /* For read statistics */
 enum {
@@ -2910,18 +3166,18 @@ static int mem_cgroup_get_local_stat(struct mem_cgroup *mem, void *data)
 	s64 val;
 
 	/* per cpu stat */
-	val = mem_cgroup_read_stat(&mem->stat, MEM_CGROUP_STAT_CACHE);
+	val = mem_cgroup_read_stat(mem, MEM_CGROUP_STAT_CACHE);
 	s->stat[MCS_CACHE] += val * PAGE_SIZE;
-	val = mem_cgroup_read_stat(&mem->stat, MEM_CGROUP_STAT_RSS);
+	val = mem_cgroup_read_stat(mem, MEM_CGROUP_STAT_RSS);
 	s->stat[MCS_RSS] += val * PAGE_SIZE;
-	val = mem_cgroup_read_stat(&mem->stat, MEM_CGROUP_STAT_FILE_MAPPED);
+	val = mem_cgroup_read_stat(mem, MEM_CGROUP_STAT_FILE_MAPPED);
 	s->stat[MCS_FILE_MAPPED] += val * PAGE_SIZE;
-	val = mem_cgroup_read_stat(&mem->stat, MEM_CGROUP_STAT_PGPGIN_COUNT);
+	val = mem_cgroup_read_stat(mem, MEM_CGROUP_STAT_PGPGIN_COUNT);
 	s->stat[MCS_PGPGIN] += val;
-	val = mem_cgroup_read_stat(&mem->stat, MEM_CGROUP_STAT_PGPGOUT_COUNT);
+	val = mem_cgroup_read_stat(mem, MEM_CGROUP_STAT_PGPGOUT_COUNT);
 	s->stat[MCS_PGPGOUT] += val;
 	if (do_swap_account) {
-		val = mem_cgroup_read_stat(&mem->stat, MEM_CGROUP_STAT_SWAPOUT);
+		val = mem_cgroup_read_stat(mem, MEM_CGROUP_STAT_SWAPOUT);
 		s->stat[MCS_SWAP] += val * PAGE_SIZE;
 	}
 
@@ -3049,12 +3305,249 @@ static int mem_cgroup_swappiness_write(struct cgroup *cgrp, struct cftype *cft,
 	return 0;
 }
 
+static void __mem_cgroup_threshold(struct mem_cgroup *memcg, bool swap)
+{
+	struct mem_cgroup_threshold_ary *t;
+	u64 usage;
+	int i;
+
+	rcu_read_lock();
+	if (!swap)
+		t = rcu_dereference(memcg->thresholds);
+	else
+		t = rcu_dereference(memcg->memsw_thresholds);
+
+	if (!t)
+		goto unlock;
+
+	usage = mem_cgroup_usage(memcg, swap);
+
+	/*
+	 * current_threshold points to threshold just below usage.
+	 * If it's not true, a threshold was crossed after last
+	 * call of __mem_cgroup_threshold().
+	 */
+	i = atomic_read(&t->current_threshold);
+
+	/*
+	 * Iterate backward over array of thresholds starting from
+	 * current_threshold and check if a threshold is crossed.
+	 * If none of thresholds below usage is crossed, we read
+	 * only one element of the array here.
+	 */
+	for (; i >= 0 && unlikely(t->entries[i].threshold > usage); i--)
+		eventfd_signal(t->entries[i].eventfd, 1);
+
+	/* i = current_threshold + 1 */
+	i++;
+
+	/*
+	 * Iterate forward over array of thresholds starting from
+	 * current_threshold+1 and check if a threshold is crossed.
+	 * If none of thresholds above usage is crossed, we read
+	 * only one element of the array here.
+	 */
+	for (; i < t->size && unlikely(t->entries[i].threshold <= usage); i++)
+		eventfd_signal(t->entries[i].eventfd, 1);
+
+	/* Update current_threshold */
+	atomic_set(&t->current_threshold, i - 1);
+unlock:
+	rcu_read_unlock();
+}
+
+static void mem_cgroup_threshold(struct mem_cgroup *memcg)
+{
+	__mem_cgroup_threshold(memcg, false);
+	if (do_swap_account)
+		__mem_cgroup_threshold(memcg, true);
+}
+
+static int compare_thresholds(const void *a, const void *b)
+{
+	const struct mem_cgroup_threshold *_a = a;
+	const struct mem_cgroup_threshold *_b = b;
+
+	return _a->threshold - _b->threshold;
+}
+
+static int mem_cgroup_register_event(struct cgroup *cgrp, struct cftype *cft,
+		struct eventfd_ctx *eventfd, const char *args)
+{
+	struct mem_cgroup *memcg = mem_cgroup_from_cont(cgrp);
+	struct mem_cgroup_threshold_ary *thresholds, *thresholds_new;
+	int type = MEMFILE_TYPE(cft->private);
+	u64 threshold, usage;
+	int size;
+	int i, ret;
+
+	ret = res_counter_memparse_write_strategy(args, &threshold);
+	if (ret)
+		return ret;
+
+	mutex_lock(&memcg->thresholds_lock);
+	if (type == _MEM)
+		thresholds = memcg->thresholds;
+	else if (type == _MEMSWAP)
+		thresholds = memcg->memsw_thresholds;
+	else
+		BUG();
+
+	usage = mem_cgroup_usage(memcg, type == _MEMSWAP);
+
+	/* Check if a threshold crossed before adding a new one */
+	if (thresholds)
+		__mem_cgroup_threshold(memcg, type == _MEMSWAP);
+
+	if (thresholds)
+		size = thresholds->size + 1;
+	else
+		size = 1;
+
+	/* Allocate memory for new array of thresholds */
+	thresholds_new = kmalloc(sizeof(*thresholds_new) +
+			size * sizeof(struct mem_cgroup_threshold),
+			GFP_KERNEL);
+	if (!thresholds_new) {
+		ret = -ENOMEM;
+		goto unlock;
+	}
+	thresholds_new->size = size;
+
+	/* Copy thresholds (if any) to new array */
+	if (thresholds)
+		memcpy(thresholds_new->entries, thresholds->entries,
+				thresholds->size *
+				sizeof(struct mem_cgroup_threshold));
+	/* Add new threshold */
+	thresholds_new->entries[size - 1].eventfd = eventfd;
+	thresholds_new->entries[size - 1].threshold = threshold;
+
+	/* Sort thresholds. Registering of new threshold isn't time-critical */
+	sort(thresholds_new->entries, size,
+			sizeof(struct mem_cgroup_threshold),
+			compare_thresholds, NULL);
+
+	/* Find current threshold */
+	atomic_set(&thresholds_new->current_threshold, -1);
+	for (i = 0; i < size; i++) {
+		if (thresholds_new->entries[i].threshold < usage) {
+			/*
+			 * thresholds_new->current_threshold will not be used
+			 * until rcu_assign_pointer(), so it's safe to increment
+			 * it here.
+			 */
+			atomic_inc(&thresholds_new->current_threshold);
+		}
+	}
+
+	if (type == _MEM)
+		rcu_assign_pointer(memcg->thresholds, thresholds_new);
+	else
+		rcu_assign_pointer(memcg->memsw_thresholds, thresholds_new);
+
+	/* To be sure that nobody uses thresholds before freeing it */
+	synchronize_rcu();
+
+	kfree(thresholds);
+unlock:
+	mutex_unlock(&memcg->thresholds_lock);
+
+	return ret;
+}
+
+static int mem_cgroup_unregister_event(struct cgroup *cgrp, struct cftype *cft,
+		struct eventfd_ctx *eventfd)
+{
+	struct mem_cgroup *memcg = mem_cgroup_from_cont(cgrp);
+	struct mem_cgroup_threshold_ary *thresholds, *thresholds_new;
+	int type = MEMFILE_TYPE(cft->private);
+	u64 usage;
+	int size = 0;
+	int i, j, ret;
+
+	mutex_lock(&memcg->thresholds_lock);
+	if (type == _MEM)
+		thresholds = memcg->thresholds;
+	else if (type == _MEMSWAP)
+		thresholds = memcg->memsw_thresholds;
+	else
+		BUG();
+
+	/*
+	 * Something went wrong if we trying to unregister a threshold
+	 * if we don't have thresholds
+	 */
+	BUG_ON(!thresholds);
+
+	usage = mem_cgroup_usage(memcg, type == _MEMSWAP);
+
+	/* Check if a threshold crossed before removing */
+	__mem_cgroup_threshold(memcg, type == _MEMSWAP);
+
+	/* Calculate new number of threshold */
+	for (i = 0; i < thresholds->size; i++) {
+		if (thresholds->entries[i].eventfd != eventfd)
+			size++;
+	}
+
+	/* Set thresholds array to NULL if we don't have thresholds */
+	if (!size) {
+		thresholds_new = NULL;
+		goto assign;
+	}
+
+	/* Allocate memory for new array of thresholds */
+	thresholds_new = kmalloc(sizeof(*thresholds_new) +
+			size * sizeof(struct mem_cgroup_threshold),
+			GFP_KERNEL);
+	if (!thresholds_new) {
+		ret = -ENOMEM;
+		goto unlock;
+	}
+	thresholds_new->size = size;
+
+	/* Copy thresholds and find current threshold */
+	atomic_set(&thresholds_new->current_threshold, -1);
+	for (i = 0, j = 0; i < thresholds->size; i++) {
+		if (thresholds->entries[i].eventfd == eventfd)
+			continue;
+
+		thresholds_new->entries[j] = thresholds->entries[i];
+		if (thresholds_new->entries[j].threshold < usage) {
+			/*
+			 * thresholds_new->current_threshold will not be used
+			 * until rcu_assign_pointer(), so it's safe to increment
+			 * it here.
+			 */
+			atomic_inc(&thresholds_new->current_threshold);
+		}
+		j++;
+	}
+
+assign:
+	if (type == _MEM)
+		rcu_assign_pointer(memcg->thresholds, thresholds_new);
+	else
+		rcu_assign_pointer(memcg->memsw_thresholds, thresholds_new);
+
+	/* To be sure that nobody uses thresholds before freeing it */
+	synchronize_rcu();
+
+	kfree(thresholds);
+unlock:
+	mutex_unlock(&memcg->thresholds_lock);
+
+	return ret;
+}
 
 static struct cftype mem_cgroup_files[] = {
 	{
 		.name = "usage_in_bytes",
 		.private = MEMFILE_PRIVATE(_MEM, RES_USAGE),
 		.read_u64 = mem_cgroup_read,
+		.register_event = mem_cgroup_register_event,
+		.unregister_event = mem_cgroup_unregister_event,
 	},
 	{
 		.name = "max_usage_in_bytes",
@@ -3098,6 +3591,11 @@ static struct cftype mem_cgroup_files[] = {
 		.read_u64 = mem_cgroup_swappiness_read,
 		.write_u64 = mem_cgroup_swappiness_write,
 	},
+	{
+		.name = "move_charge_at_immigrate",
+		.read_u64 = mem_cgroup_move_charge_read,
+		.write_u64 = mem_cgroup_move_charge_write,
+	},
 };
 
 #ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP
@@ -3106,6 +3604,8 @@ static struct cftype memsw_cgroup_files[] = {
 		.name = "memsw.usage_in_bytes",
 		.private = MEMFILE_PRIVATE(_MEMSWAP, RES_USAGE),
 		.read_u64 = mem_cgroup_read,
+		.register_event = mem_cgroup_register_event,
+		.unregister_event = mem_cgroup_unregister_event,
 	},
 	{
 		.name = "memsw.max_usage_in_bytes",
@@ -3180,17 +3680,12 @@ static void free_mem_cgroup_per_zone_info(struct mem_cgroup *mem, int node)
 	kfree(mem->info.nodeinfo[node]);
 }
 
-static int mem_cgroup_size(void)
-{
-	int cpustat_size = nr_cpu_ids * sizeof(struct mem_cgroup_stat_cpu);
-	return sizeof(struct mem_cgroup) + cpustat_size;
-}
-
 static struct mem_cgroup *mem_cgroup_alloc(void)
 {
 	struct mem_cgroup *mem;
-	int size = mem_cgroup_size();
+	int size = sizeof(struct mem_cgroup);
 
+	/* Can be very big if MAX_NUMNODES is very big */
 	if (size < PAGE_SIZE)
 		mem = kmalloc(size, GFP_KERNEL);
 	else
@@ -3198,6 +3693,14 @@ static struct mem_cgroup *mem_cgroup_alloc(void)
 
 	if (mem)
 		memset(mem, 0, size);
+	mem->stat = alloc_percpu(struct mem_cgroup_stat_cpu);
+	if (!mem->stat) {
+		if (size < PAGE_SIZE)
+			kfree(mem);
+		else
+			vfree(mem);
+		mem = NULL;
+	}
 	return mem;
 }
 
@@ -3222,7 +3725,8 @@ static void __mem_cgroup_free(struct mem_cgroup *mem)
 	for_each_node_state(node, N_POSSIBLE)
 		free_mem_cgroup_per_zone_info(mem, node);
 
-	if (mem_cgroup_size() < PAGE_SIZE)
+	free_percpu(mem->stat);
+	if (sizeof(struct mem_cgroup) < PAGE_SIZE)
 		kfree(mem);
 	else
 		vfree(mem);
@@ -3233,9 +3737,9 @@ static void mem_cgroup_get(struct mem_cgroup *mem)
 	atomic_inc(&mem->refcnt);
 }
 
-static void mem_cgroup_put(struct mem_cgroup *mem)
+static void __mem_cgroup_put(struct mem_cgroup *mem, int count)
 {
-	if (atomic_dec_and_test(&mem->refcnt)) {
+	if (atomic_sub_and_test(count, &mem->refcnt)) {
 		struct mem_cgroup *parent = parent_mem_cgroup(mem);
 		__mem_cgroup_free(mem);
 		if (parent)
@@ -3243,6 +3747,11 @@ static void mem_cgroup_put(struct mem_cgroup *mem)
 	}
 }
 
+static void mem_cgroup_put(struct mem_cgroup *mem)
+{
+	__mem_cgroup_put(mem, 1);
+}
+
 /*
  * Returns the parent mem_cgroup in memcgroup hierarchy with hierarchy enabled.
  */
@@ -3319,7 +3828,6 @@ mem_cgroup_create(struct cgroup_subsys *ss, struct cgroup *cont)
 			INIT_WORK(&stock->work, drain_local_stock);
 		}
 		hotcpu_notifier(memcg_stock_cpu_callback, 0);
-
 	} else {
 		parent = mem_cgroup_from_cont(cont->parent);
 		mem->use_hierarchy = parent->use_hierarchy;
@@ -3345,6 +3853,8 @@ mem_cgroup_create(struct cgroup_subsys *ss, struct cgroup *cont)
 	if (parent)
 		mem->swappiness = get_swappiness(parent);
 	atomic_set(&mem->refcnt, 1);
+	mem->move_charge_at_immigrate = 0;
+	mutex_init(&mem->thresholds_lock);
 	return &mem->css;
 free_out:
 	__mem_cgroup_free(mem);
@@ -3381,16 +3891,444 @@ static int mem_cgroup_populate(struct cgroup_subsys *ss,
 	return ret;
 }
 
+#ifdef CONFIG_MMU
+/* Handlers for move charge at task migration. */
+#define PRECHARGE_COUNT_AT_ONCE	256
+static int mem_cgroup_do_precharge(unsigned long count)
+{
+	int ret = 0;
+	int batch_count = PRECHARGE_COUNT_AT_ONCE;
+	struct mem_cgroup *mem = mc.to;
+
+	if (mem_cgroup_is_root(mem)) {
+		mc.precharge += count;
+		/* we don't need css_get for root */
+		return ret;
+	}
+	/* try to charge at once */
+	if (count > 1) {
+		struct res_counter *dummy;
+		/*
+		 * "mem" cannot be under rmdir() because we've already checked
+		 * by cgroup_lock_live_cgroup() that it is not removed and we
+		 * are still under the same cgroup_mutex. So we can postpone
+		 * css_get().
+		 */
+		if (res_counter_charge(&mem->res, PAGE_SIZE * count, &dummy))
+			goto one_by_one;
+		if (do_swap_account && res_counter_charge(&mem->memsw,
+						PAGE_SIZE * count, &dummy)) {
+			res_counter_uncharge(&mem->res, PAGE_SIZE * count);
+			goto one_by_one;
+		}
+		mc.precharge += count;
+		VM_BUG_ON(test_bit(CSS_ROOT, &mem->css.flags));
+		WARN_ON_ONCE(count > INT_MAX);
+		__css_get(&mem->css, (int)count);
+		return ret;
+	}
+one_by_one:
+	/* fall back to one by one charge */
+	while (count--) {
+		if (signal_pending(current)) {
+			ret = -EINTR;
+			break;
+		}
+		if (!batch_count--) {
+			batch_count = PRECHARGE_COUNT_AT_ONCE;
+			cond_resched();
+		}
+		ret = __mem_cgroup_try_charge(NULL, GFP_KERNEL, &mem, false);
+		if (ret || !mem)
+			/* mem_cgroup_clear_mc() will do uncharge later */
+			return -ENOMEM;
+		mc.precharge++;
+	}
+	return ret;
+}
+#else	/* !CONFIG_MMU */
+static int mem_cgroup_can_attach(struct cgroup_subsys *ss,
+				struct cgroup *cgroup,
+				struct task_struct *p,
+				bool threadgroup)
+{
+	return 0;
+}
+static void mem_cgroup_cancel_attach(struct cgroup_subsys *ss,
+				struct cgroup *cgroup,
+				struct task_struct *p,
+				bool threadgroup)
+{
+}
 static void mem_cgroup_move_task(struct cgroup_subsys *ss,
 				struct cgroup *cont,
 				struct cgroup *old_cont,
 				struct task_struct *p,
 				bool threadgroup)
 {
+}
+#endif
+
+/**
+ * is_target_pte_for_mc - check a pte whether it is valid for move charge
+ * @vma: the vma the pte to be checked belongs
+ * @addr: the address corresponding to the pte to be checked
+ * @ptent: the pte to be checked
+ * @target: the pointer the target page or swap ent will be stored(can be NULL)
+ *
+ * Returns
+ *   0(MC_TARGET_NONE): if the pte is not a target for move charge.
+ *   1(MC_TARGET_PAGE): if the page corresponding to this pte is a target for
+ *     move charge. if @target is not NULL, the page is stored in target->page
+ *     with extra refcnt got(Callers should handle it).
+ *   2(MC_TARGET_SWAP): if the swap entry corresponding to this pte is a
+ *     target for charge migration. if @target is not NULL, the entry is stored
+ *     in target->ent.
+ *
+ * Called with pte lock held.
+ */
+union mc_target {
+	struct page	*page;
+	swp_entry_t	ent;
+};
+
+enum mc_target_type {
+	MC_TARGET_NONE,	/* not used */
+	MC_TARGET_PAGE,
+	MC_TARGET_SWAP,
+};
+
+static int is_target_pte_for_mc(struct vm_area_struct *vma,
+		unsigned long addr, pte_t ptent, union mc_target *target)
+{
+	struct page *page = NULL;
+	struct page_cgroup *pc;
+	int ret = 0;
+	swp_entry_t ent = { .val = 0 };
+	int usage_count = 0;
+	bool move_anon = test_bit(MOVE_CHARGE_TYPE_ANON,
+					&mc.to->move_charge_at_immigrate);
+
+	if (!pte_present(ptent)) {
+		/* TODO: handle swap of shmes/tmpfs */
+		if (pte_none(ptent) || pte_file(ptent))
+			return 0;
+		else if (is_swap_pte(ptent)) {
+			ent = pte_to_swp_entry(ptent);
+			if (!move_anon || non_swap_entry(ent))
+				return 0;
+			usage_count = mem_cgroup_count_swap_user(ent, &page);
+		}
+	} else {
+		page = vm_normal_page(vma, addr, ptent);
+		if (!page || !page_mapped(page))
+			return 0;
+		/*
+		 * TODO: We don't move charges of file(including shmem/tmpfs)
+		 * pages for now.
+		 */
+		if (!move_anon || !PageAnon(page))
+			return 0;
+		if (!get_page_unless_zero(page))
+			return 0;
+		usage_count = page_mapcount(page);
+	}
+	if (usage_count > 1) {
+		/*
+		 * TODO: We don't move charges of shared(used by multiple
+		 * processes) pages for now.
+		 */
+		if (page)
+			put_page(page);
+		return 0;
+	}
+	if (page) {
+		pc = lookup_page_cgroup(page);
+		/*
+		 * Do only loose check w/o page_cgroup lock.
+		 * mem_cgroup_move_account() checks the pc is valid or not under
+		 * the lock.
+		 */
+		if (PageCgroupUsed(pc) && pc->mem_cgroup == mc.from) {
+			ret = MC_TARGET_PAGE;
+			if (target)
+				target->page = page;
+		}
+		if (!ret || !target)
+			put_page(page);
+	}
+	/* throught */
+	if (ent.val && do_swap_account && !ret &&
+			css_id(&mc.from->css) == lookup_swap_cgroup(ent)) {
+		ret = MC_TARGET_SWAP;
+		if (target)
+			target->ent = ent;
+	}
+	return ret;
+}
+
+static int mem_cgroup_count_precharge_pte_range(pmd_t *pmd,
+					unsigned long addr, unsigned long end,
+					struct mm_walk *walk)
+{
+	struct vm_area_struct *vma = walk->private;
+	pte_t *pte;
+	spinlock_t *ptl;
+
+	pte = pte_offset_map_lock(vma->vm_mm, pmd, addr, &ptl);
+	for (; addr != end; pte++, addr += PAGE_SIZE)
+		if (is_target_pte_for_mc(vma, addr, *pte, NULL))
+			mc.precharge++;	/* increment precharge temporarily */
+	pte_unmap_unlock(pte - 1, ptl);
+	cond_resched();
+
+	return 0;
+}
+
+static unsigned long mem_cgroup_count_precharge(struct mm_struct *mm)
+{
+	unsigned long precharge;
+	struct vm_area_struct *vma;
+
+	down_read(&mm->mmap_sem);
+	for (vma = mm->mmap; vma; vma = vma->vm_next) {
+		struct mm_walk mem_cgroup_count_precharge_walk = {
+			.pmd_entry = mem_cgroup_count_precharge_pte_range,
+			.mm = mm,
+			.private = vma,
+		};
+		if (is_vm_hugetlb_page(vma))
+			continue;
+		/* TODO: We don't move charges of shmem/tmpfs pages for now. */
+		if (vma->vm_flags & VM_SHARED)
+			continue;
+		walk_page_range(vma->vm_start, vma->vm_end,
+					&mem_cgroup_count_precharge_walk);
+	}
+	up_read(&mm->mmap_sem);
+
+	precharge = mc.precharge;
+	mc.precharge = 0;
+
+	return precharge;
+}
+
+static int mem_cgroup_precharge_mc(struct mm_struct *mm)
+{
+	return mem_cgroup_do_precharge(mem_cgroup_count_precharge(mm));
+}
+
+static void mem_cgroup_clear_mc(void)
+{
+	/* we must uncharge all the leftover precharges from mc.to */
+	if (mc.precharge) {
+		__mem_cgroup_cancel_charge(mc.to, mc.precharge);
+		mc.precharge = 0;
+	}
 	/*
-	 * FIXME: It's better to move charges of this process from old
-	 * memcg to new memcg. But it's just on TODO-List now.
+	 * we didn't uncharge from mc.from at mem_cgroup_move_account(), so
+	 * we must uncharge here.
 	 */
+	if (mc.moved_charge) {
+		__mem_cgroup_cancel_charge(mc.from, mc.moved_charge);
+		mc.moved_charge = 0;
+	}
+	/* we must fixup refcnts and charges */
+	if (mc.moved_swap) {
+		WARN_ON_ONCE(mc.moved_swap > INT_MAX);
+		/* uncharge swap account from the old cgroup */
+		if (!mem_cgroup_is_root(mc.from))
+			res_counter_uncharge(&mc.from->memsw,
+						PAGE_SIZE * mc.moved_swap);
+		__mem_cgroup_put(mc.from, mc.moved_swap);
+
+		if (!mem_cgroup_is_root(mc.to)) {
+			/*
+			 * we charged both to->res and to->memsw, so we should
+			 * uncharge to->res.
+			 */
+			res_counter_uncharge(&mc.to->res,
+						PAGE_SIZE * mc.moved_swap);
+			VM_BUG_ON(test_bit(CSS_ROOT, &mc.to->css.flags));
+			__css_put(&mc.to->css, mc.moved_swap);
+		}
+		/* we've already done mem_cgroup_get(mc.to) */
+
+		mc.moved_swap = 0;
+	}
+	mc.from = NULL;
+	mc.to = NULL;
+	mc.moving_task = NULL;
+	wake_up_all(&mc.waitq);
+}
+
+static int mem_cgroup_can_attach(struct cgroup_subsys *ss,
+				struct cgroup *cgroup,
+				struct task_struct *p,
+				bool threadgroup)
+{
+	int ret = 0;
+	struct mem_cgroup *mem = mem_cgroup_from_cont(cgroup);
+
+	if (mem->move_charge_at_immigrate) {
+		struct mm_struct *mm;
+		struct mem_cgroup *from = mem_cgroup_from_task(p);
+
+		VM_BUG_ON(from == mem);
+
+		mm = get_task_mm(p);
+		if (!mm)
+			return 0;
+		/* We move charges only when we move a owner of the mm */
+		if (mm->owner == p) {
+			VM_BUG_ON(mc.from);
+			VM_BUG_ON(mc.to);
+			VM_BUG_ON(mc.precharge);
+			VM_BUG_ON(mc.moved_charge);
+			VM_BUG_ON(mc.moved_swap);
+			VM_BUG_ON(mc.moving_task);
+			mc.from = from;
+			mc.to = mem;
+			mc.precharge = 0;
+			mc.moved_charge = 0;
+			mc.moved_swap = 0;
+			mc.moving_task = current;
+
+			ret = mem_cgroup_precharge_mc(mm);
+			if (ret)
+				mem_cgroup_clear_mc();
+		}
+		mmput(mm);
+	}
+	return ret;
+}
+
+static void mem_cgroup_cancel_attach(struct cgroup_subsys *ss,
+				struct cgroup *cgroup,
+				struct task_struct *p,
+				bool threadgroup)
+{
+	mem_cgroup_clear_mc();
+}
+
+static int mem_cgroup_move_charge_pte_range(pmd_t *pmd,
+				unsigned long addr, unsigned long end,
+				struct mm_walk *walk)
+{
+	int ret = 0;
+	struct vm_area_struct *vma = walk->private;
+	pte_t *pte;
+	spinlock_t *ptl;
+
+retry:
+	pte = pte_offset_map_lock(vma->vm_mm, pmd, addr, &ptl);
+	for (; addr != end; addr += PAGE_SIZE) {
+		pte_t ptent = *(pte++);
+		union mc_target target;
+		int type;
+		struct page *page;
+		struct page_cgroup *pc;
+		swp_entry_t ent;
+
+		if (!mc.precharge)
+			break;
+
+		type = is_target_pte_for_mc(vma, addr, ptent, &target);
+		switch (type) {
+		case MC_TARGET_PAGE:
+			page = target.page;
+			if (isolate_lru_page(page))
+				goto put;
+			pc = lookup_page_cgroup(page);
+			if (!mem_cgroup_move_account(pc,
+						mc.from, mc.to, false)) {
+				mc.precharge--;
+				/* we uncharge from mc.from later. */
+				mc.moved_charge++;
+			}
+			putback_lru_page(page);
+put:			/* is_target_pte_for_mc() gets the page */
+			put_page(page);
+			break;
+		case MC_TARGET_SWAP:
+			ent = target.ent;
+			if (!mem_cgroup_move_swap_account(ent,
+						mc.from, mc.to, false)) {
+				mc.precharge--;
+				/* we fixup refcnts and charges later. */
+				mc.moved_swap++;
+			}
+			break;
+		default:
+			break;
+		}
+	}
+	pte_unmap_unlock(pte - 1, ptl);
+	cond_resched();
+
+	if (addr != end) {
+		/*
+		 * We have consumed all precharges we got in can_attach().
+		 * We try charge one by one, but don't do any additional
+		 * charges to mc.to if we have failed in charge once in attach()
+		 * phase.
+		 */
+		ret = mem_cgroup_do_precharge(1);
+		if (!ret)
+			goto retry;
+	}
+
+	return ret;
+}
+
+static void mem_cgroup_move_charge(struct mm_struct *mm)
+{
+	struct vm_area_struct *vma;
+
+	lru_add_drain_all();
+	down_read(&mm->mmap_sem);
+	for (vma = mm->mmap; vma; vma = vma->vm_next) {
+		int ret;
+		struct mm_walk mem_cgroup_move_charge_walk = {
+			.pmd_entry = mem_cgroup_move_charge_pte_range,
+			.mm = mm,
+			.private = vma,
+		};
+		if (is_vm_hugetlb_page(vma))
+			continue;
+		/* TODO: We don't move charges of shmem/tmpfs pages for now. */
+		if (vma->vm_flags & VM_SHARED)
+			continue;
+		ret = walk_page_range(vma->vm_start, vma->vm_end,
+						&mem_cgroup_move_charge_walk);
+		if (ret)
+			/*
+			 * means we have consumed all precharges and failed in
+			 * doing additional charge. Just abandon here.
+			 */
+			break;
+	}
+	up_read(&mm->mmap_sem);
+}
+
+static void mem_cgroup_move_task(struct cgroup_subsys *ss,
+				struct cgroup *cont,
+				struct cgroup *old_cont,
+				struct task_struct *p,
+				bool threadgroup)
+{
+	struct mm_struct *mm;
+
+	if (!mc.to)
+		/* no need to move charge */
+		return;
+
+	mm = get_task_mm(p);
+	if (mm) {
+		mem_cgroup_move_charge(mm);
+		mmput(mm);
+	}
+	mem_cgroup_clear_mc();
 }
 
 struct cgroup_subsys mem_cgroup_subsys = {
@@ -3400,6 +4338,8 @@ struct cgroup_subsys mem_cgroup_subsys = {
 	.pre_destroy = mem_cgroup_pre_destroy,
 	.destroy = mem_cgroup_destroy,
 	.populate = mem_cgroup_populate,
+	.can_attach = mem_cgroup_can_attach,
+	.cancel_attach = mem_cgroup_cancel_attach,
 	.attach = mem_cgroup_move_task,
 	.early_init = 0,
 	.use_id = 1,
diff --git a/mm/memory.c b/mm/memory.c
index d1153e37e9ba..5b7f2002e54b 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -190,9 +190,6 @@ static void check_sync_rss_stat(struct task_struct *task)
 {
 }
 
-void sync_mm_rss(struct task_struct *task, struct mm_struct *mm)
-{
-}
 #endif
 
 /*
@@ -512,12 +509,8 @@ static void print_bad_pte(struct vm_area_struct *vma, unsigned long addr,
 		"BUG: Bad page map in process %s  pte:%08llx pmd:%08llx\n",
 		current->comm,
 		(long long)pte_val(pte), (long long)pmd_val(*pmd));
-	if (page) {
-		printk(KERN_ALERT
-		"page:%p flags:%p count:%d mapcount:%d mapping:%p index:%lx\n",
-		page, (void *)page->flags, page_count(page),
-		page_mapcount(page), page->mapping, page->index);
-	}
+	if (page)
+		dump_page(page);
 	printk(KERN_ALERT
 		"addr:%p vm_flags:%08lx anon_vma:%p mapping:%p index:%lx\n",
 		(void *)addr, vma->vm_flags, vma->anon_vma, mapping, index);
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index 78e34e63c7b8..be211a582930 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -688,9 +688,9 @@ do_migrate_range(unsigned long start_pfn, unsigned long end_pfn)
 			if (page_count(page))
 				not_managed++;
 #ifdef CONFIG_DEBUG_VM
-			printk(KERN_INFO "removing from LRU failed"
-					 " %lx/%d/%lx\n",
-				pfn, page_count(page), page->flags);
+			printk(KERN_ALERT "removing pfn %lx from LRU failed\n",
+			       pfn);
+			dump_page(page);
 #endif
 		}
 	}
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index bda230e52acd..643f66e10187 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -1756,10 +1756,12 @@ struct mempolicy *__mpol_dup(struct mempolicy *old)
 
 	if (!new)
 		return ERR_PTR(-ENOMEM);
+	rcu_read_lock();
 	if (current_cpuset_is_being_rebound()) {
 		nodemask_t mems = cpuset_mems_allowed(current);
 		mpol_rebind_policy(old, &mems);
 	}
+	rcu_read_unlock();
 	*new = *old;
 	atomic_set(&new->refcnt, 1);
 	return new;
diff --git a/mm/mmap.c b/mm/mmap.c
index f1b4448626bf..75557c639ad4 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -1088,6 +1088,30 @@ out:
 	return retval;
 }
 
+#ifdef __ARCH_WANT_SYS_OLD_MMAP
+struct mmap_arg_struct {
+	unsigned long addr;
+	unsigned long len;
+	unsigned long prot;
+	unsigned long flags;
+	unsigned long fd;
+	unsigned long offset;
+};
+
+SYSCALL_DEFINE1(old_mmap, struct mmap_arg_struct __user *, arg)
+{
+	struct mmap_arg_struct a;
+
+	if (copy_from_user(&a, arg, sizeof(a)))
+		return -EFAULT;
+	if (a.offset & ~PAGE_MASK)
+		return -EINVAL;
+
+	return sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd,
+			      a.offset >> PAGE_SHIFT);
+}
+#endif /* __ARCH_WANT_SYS_OLD_MMAP */
+
 /*
  * Some shared mappigns will want the pages marked read-only
  * to track write events. If so, we'll downgrade vm_page_prot
diff --git a/mm/nommu.c b/mm/nommu.c
index b9b5cceb1b68..605ace8982a8 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -1428,6 +1428,30 @@ out:
 	return retval;
 }
 
+#ifdef __ARCH_WANT_SYS_OLD_MMAP
+struct mmap_arg_struct {
+	unsigned long addr;
+	unsigned long len;
+	unsigned long prot;
+	unsigned long flags;
+	unsigned long fd;
+	unsigned long offset;
+};
+
+SYSCALL_DEFINE1(old_mmap, struct mmap_arg_struct __user *, arg)
+{
+	struct mmap_arg_struct a;
+
+	if (copy_from_user(&a, arg, sizeof(a)))
+		return -EFAULT;
+	if (a.offset & ~PAGE_MASK)
+		return -EINVAL;
+
+	return sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd,
+			      a.offset >> PAGE_SHIFT);
+}
+#endif /* __ARCH_WANT_SYS_OLD_MMAP */
+
 /*
  * split a vma into two pieces at address 'addr', a new vma is allocated either
  * for the first part or the tail.
diff --git a/mm/oom_kill.c b/mm/oom_kill.c
index 35755a4156d6..9b223af6a147 100644
--- a/mm/oom_kill.c
+++ b/mm/oom_kill.c
@@ -473,6 +473,8 @@ void mem_cgroup_out_of_memory(struct mem_cgroup *mem, gfp_t gfp_mask)
 	unsigned long points = 0;
 	struct task_struct *p;
 
+	if (sysctl_panic_on_oom == 2)
+		panic("out of memory(memcg). panic_on_oom is selected.\n");
 	read_lock(&tasklist_lock);
 retry:
 	p = select_bad_process(&points, mem);
@@ -601,13 +603,6 @@ void pagefault_out_of_memory(void)
 		/* Got some memory back in the last second. */
 		return;
 
-	/*
-	 * If this is from memcg, oom-killer is already invoked.
-	 * and not worth to go system-wide-oom.
-	 */
-	if (mem_cgroup_oom_called(current))
-		goto rest_and_return;
-
 	if (sysctl_panic_on_oom)
 		panic("out of memory from page fault. panic_on_oom is selected.\n");
 
@@ -619,7 +614,6 @@ void pagefault_out_of_memory(void)
 	 * Give "p" a good chance of killing itself before we
 	 * retry to allocate memory.
 	 */
-rest_and_return:
 	if (!test_thread_flag(TIF_MEMDIE))
 		schedule_timeout_uninterruptible(1);
 }
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index a8182c89de59..d03c946d5566 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -50,6 +50,7 @@
 #include <linux/kmemleak.h>
 #include <linux/memory.h>
 #include <trace/events/kmem.h>
+#include <linux/ftrace_event.h>
 
 #include <asm/tlbflush.h>
 #include <asm/div64.h>
@@ -288,10 +289,7 @@ static void bad_page(struct page *page)
 
 	printk(KERN_ALERT "BUG: Bad page state in process %s  pfn:%05lx\n",
 		current->comm, page_to_pfn(page));
-	printk(KERN_ALERT
-		"page:%p flags:%p count:%d mapcount:%d mapping:%p index:%lx\n",
-		page, (void *)page->flags, page_count(page),
-		page_mapcount(page), page->mapping, page->index);
+	dump_page(page);
 
 	dump_stack();
 out:
@@ -3224,7 +3222,7 @@ static int __zone_pcp_update(void *data)
 	int cpu;
 	unsigned long batch = zone_batchsize(zone), flags;
 
-	for (cpu = 0; cpu < NR_CPUS; cpu++) {
+	for_each_possible_cpu(cpu) {
 		struct per_cpu_pageset *pset;
 		struct per_cpu_pages *pcp;
 
@@ -5183,3 +5181,80 @@ bool is_free_buddy_page(struct page *page)
 	return order < MAX_ORDER;
 }
 #endif
+
+static struct trace_print_flags pageflag_names[] = {
+	{1UL << PG_locked,		"locked"	},
+	{1UL << PG_error,		"error"		},
+	{1UL << PG_referenced,		"referenced"	},
+	{1UL << PG_uptodate,		"uptodate"	},
+	{1UL << PG_dirty,		"dirty"		},
+	{1UL << PG_lru,			"lru"		},
+	{1UL << PG_active,		"active"	},
+	{1UL << PG_slab,		"slab"		},
+	{1UL << PG_owner_priv_1,	"owner_priv_1"	},
+	{1UL << PG_arch_1,		"arch_1"	},
+	{1UL << PG_reserved,		"reserved"	},
+	{1UL << PG_private,		"private"	},
+	{1UL << PG_private_2,		"private_2"	},
+	{1UL << PG_writeback,		"writeback"	},
+#ifdef CONFIG_PAGEFLAGS_EXTENDED
+	{1UL << PG_head,		"head"		},
+	{1UL << PG_tail,		"tail"		},
+#else
+	{1UL << PG_compound,		"compound"	},
+#endif
+	{1UL << PG_swapcache,		"swapcache"	},
+	{1UL << PG_mappedtodisk,	"mappedtodisk"	},
+	{1UL << PG_reclaim,		"reclaim"	},
+	{1UL << PG_buddy,		"buddy"		},
+	{1UL << PG_swapbacked,		"swapbacked"	},
+	{1UL << PG_unevictable,		"unevictable"	},
+#ifdef CONFIG_MMU
+	{1UL << PG_mlocked,		"mlocked"	},
+#endif
+#ifdef CONFIG_ARCH_USES_PG_UNCACHED
+	{1UL << PG_uncached,		"uncached"	},
+#endif
+#ifdef CONFIG_MEMORY_FAILURE
+	{1UL << PG_hwpoison,		"hwpoison"	},
+#endif
+	{-1UL,				NULL		},
+};
+
+static void dump_page_flags(unsigned long flags)
+{
+	const char *delim = "";
+	unsigned long mask;
+	int i;
+
+	printk(KERN_ALERT "page flags: %#lx(", flags);
+
+	/* remove zone id */
+	flags &= (1UL << NR_PAGEFLAGS) - 1;
+
+	for (i = 0; pageflag_names[i].name && flags; i++) {
+
+		mask = pageflag_names[i].mask;
+		if ((flags & mask) != mask)
+			continue;
+
+		flags &= ~mask;
+		printk("%s%s", delim, pageflag_names[i].name);
+		delim = "|";
+	}
+
+	/* check for left over flags */
+	if (flags)
+		printk("%s%#lx", delim, flags);
+
+	printk(")\n");
+}
+
+void dump_page(struct page *page)
+{
+	printk(KERN_ALERT
+	       "page:%p count:%d mapcount:%d mapping:%p index:%#lx\n",
+		page, page_count(page), page_mapcount(page),
+		page->mapping, page->index);
+	dump_page_flags(page->flags);
+}
diff --git a/mm/page_cgroup.c b/mm/page_cgroup.c
index 3d535d594826..6c0081441a32 100644
--- a/mm/page_cgroup.c
+++ b/mm/page_cgroup.c
@@ -284,6 +284,7 @@ static DEFINE_MUTEX(swap_cgroup_mutex);
 struct swap_cgroup_ctrl {
 	struct page **map;
 	unsigned long length;
+	spinlock_t	lock;
 };
 
 struct swap_cgroup_ctrl swap_cgroup_ctrl[MAX_SWAPFILES];
@@ -335,6 +336,43 @@ not_enough_page:
 }
 
 /**
+ * swap_cgroup_cmpxchg - cmpxchg mem_cgroup's id for this swp_entry.
+ * @end: swap entry to be cmpxchged
+ * @old: old id
+ * @new: new id
+ *
+ * Returns old id at success, 0 at failure.
+ * (There is no mem_cgroup useing 0 as its id)
+ */
+unsigned short swap_cgroup_cmpxchg(swp_entry_t ent,
+					unsigned short old, unsigned short new)
+{
+	int type = swp_type(ent);
+	unsigned long offset = swp_offset(ent);
+	unsigned long idx = offset / SC_PER_PAGE;
+	unsigned long pos = offset & SC_POS_MASK;
+	struct swap_cgroup_ctrl *ctrl;
+	struct page *mappage;
+	struct swap_cgroup *sc;
+	unsigned long flags;
+	unsigned short retval;
+
+	ctrl = &swap_cgroup_ctrl[type];
+
+	mappage = ctrl->map[idx];
+	sc = page_address(mappage);
+	sc += pos;
+	spin_lock_irqsave(&ctrl->lock, flags);
+	retval = sc->id;
+	if (retval == old)
+		sc->id = new;
+	else
+		retval = 0;
+	spin_unlock_irqrestore(&ctrl->lock, flags);
+	return retval;
+}
+
+/**
  * swap_cgroup_record - record mem_cgroup for this swp_entry.
  * @ent: swap entry to be recorded into
  * @mem: mem_cgroup to be recorded
@@ -352,14 +390,17 @@ unsigned short swap_cgroup_record(swp_entry_t ent, unsigned short id)
 	struct page *mappage;
 	struct swap_cgroup *sc;
 	unsigned short old;
+	unsigned long flags;
 
 	ctrl = &swap_cgroup_ctrl[type];
 
 	mappage = ctrl->map[idx];
 	sc = page_address(mappage);
 	sc += pos;
+	spin_lock_irqsave(&ctrl->lock, flags);
 	old = sc->id;
 	sc->id = id;
+	spin_unlock_irqrestore(&ctrl->lock, flags);
 
 	return old;
 }
@@ -411,6 +452,7 @@ int swap_cgroup_swapon(int type, unsigned long max_pages)
 	mutex_lock(&swap_cgroup_mutex);
 	ctrl->length = length;
 	ctrl->map = array;
+	spin_lock_init(&ctrl->lock);
 	if (swap_cgroup_prepare(type)) {
 		/* memory shortage */
 		ctrl->map = NULL;
diff --git a/mm/slub.c b/mm/slub.c
index 0bfd3863d521..b364844a1068 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -2960,7 +2960,7 @@ static void slab_mem_offline_callback(void *arg)
 			/*
 			 * if n->nr_slabs > 0, slabs still exist on the node
 			 * that is going down. We were unable to free them,
-			 * and offline_pages() function shoudn't call this
+			 * and offline_pages() function shouldn't call this
 			 * callback. So, we must fail.
 			 */
 			BUG_ON(slabs_node(s, offline_node));
@@ -4390,7 +4390,7 @@ static void kmem_cache_release(struct kobject *kobj)
 	kfree(s);
 }
 
-static struct sysfs_ops slab_sysfs_ops = {
+static const struct sysfs_ops slab_sysfs_ops = {
 	.show = slab_attr_show,
 	.store = slab_attr_store,
 };
@@ -4409,7 +4409,7 @@ static int uevent_filter(struct kset *kset, struct kobject *kobj)
 	return 0;
 }
 
-static struct kset_uevent_ops slab_uevent_ops = {
+static const struct kset_uevent_ops slab_uevent_ops = {
 	.filter = uevent_filter,
 };
 
diff --git a/mm/swapfile.c b/mm/swapfile.c
index 84374d8cf814..6cd0a8f90dc7 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -723,6 +723,37 @@ int free_swap_and_cache(swp_entry_t entry)
 	return p != NULL;
 }
 
+#ifdef CONFIG_CGROUP_MEM_RES_CTLR
+/**
+ * mem_cgroup_count_swap_user - count the user of a swap entry
+ * @ent: the swap entry to be checked
+ * @pagep: the pointer for the swap cache page of the entry to be stored
+ *
+ * Returns the number of the user of the swap entry. The number is valid only
+ * for swaps of anonymous pages.
+ * If the entry is found on swap cache, the page is stored to pagep with
+ * refcount of it being incremented.
+ */
+int mem_cgroup_count_swap_user(swp_entry_t ent, struct page **pagep)
+{
+	struct page *page;
+	struct swap_info_struct *p;
+	int count = 0;
+
+	page = find_get_page(&swapper_space, ent.val);
+	if (page)
+		count += page_mapcount(page);
+	p = swap_info_get(ent);
+	if (p) {
+		count += swap_count(p->swap_map[swp_offset(ent)]);
+		spin_unlock(&swap_lock);
+	}
+
+	*pagep = page;
+	return count;
+}
+#endif
+
 #ifdef CONFIG_HIBERNATION
 /*
  * Find the swap type that corresponds to given device (if any).
diff --git a/net/9p/client.c b/net/9p/client.c
index bde9f3d38c57..e3e5bf4469ce 100644
--- a/net/9p/client.c
+++ b/net/9p/client.c
@@ -60,7 +60,7 @@ static const match_table_t tokens = {
 
 inline int p9_is_proto_dotl(struct p9_client *clnt)
 {
-	return (clnt->proto_version == p9_proto_2010L);
+	return (clnt->proto_version == p9_proto_2000L);
 }
 EXPORT_SYMBOL(p9_is_proto_dotl);
 
@@ -80,9 +80,9 @@ static unsigned char get_protocol_version(const substring_t *name)
 	} else if (!strncmp("9p2000.u", name->from, name->to-name->from)) {
 		version = p9_proto_2000u;
 		P9_DPRINTK(P9_DEBUG_9P, "Protocol version: 9P2000.u\n");
-	} else if (!strncmp("9p2010.L", name->from, name->to-name->from)) {
-		version = p9_proto_2010L;
-		P9_DPRINTK(P9_DEBUG_9P, "Protocol version: 9P2010.L\n");
+	} else if (!strncmp("9p2000.L", name->from, name->to-name->from)) {
+		version = p9_proto_2000L;
+		P9_DPRINTK(P9_DEBUG_9P, "Protocol version: 9P2000.L\n");
 	} else {
 		P9_DPRINTK(P9_DEBUG_ERROR, "Unknown protocol version %s. ",
 							name->from);
@@ -672,9 +672,9 @@ int p9_client_version(struct p9_client *c)
 						c->msize, c->proto_version);
 
 	switch (c->proto_version) {
-	case p9_proto_2010L:
+	case p9_proto_2000L:
 		req = p9_client_rpc(c, P9_TVERSION, "ds",
-					c->msize, "9P2010.L");
+					c->msize, "9P2000.L");
 		break;
 	case p9_proto_2000u:
 		req = p9_client_rpc(c, P9_TVERSION, "ds",
@@ -700,8 +700,8 @@ int p9_client_version(struct p9_client *c)
 	}
 
 	P9_DPRINTK(P9_DEBUG_9P, "<<< RVERSION msize %d %s\n", msize, version);
-	if (!strncmp(version, "9P2010.L", 8))
-		c->proto_version = p9_proto_2010L;
+	if (!strncmp(version, "9P2000.L", 8))
+		c->proto_version = p9_proto_2000L;
 	else if (!strncmp(version, "9P2000.u", 8))
 		c->proto_version = p9_proto_2000u;
 	else if (!strncmp(version, "9P2000", 6))
diff --git a/net/9p/trans_virtio.c b/net/9p/trans_virtio.c
index 0aaed4819379..afde1a89fbb3 100644
--- a/net/9p/trans_virtio.c
+++ b/net/9p/trans_virtio.c
@@ -78,6 +78,12 @@ struct virtio_chan {
 	/* Scatterlist: can be too big for stack. */
 	struct scatterlist sg[VIRTQUEUE_NUM];
 
+	int tag_len;
+	/*
+	 * tag name to identify a mount Non-null terminated
+	 */
+	char *tag;
+
 	struct list_head chan_list;
 };
 
@@ -214,6 +220,20 @@ p9_virtio_request(struct p9_client *client, struct p9_req_t *req)
 	return 0;
 }
 
+static ssize_t p9_mount_tag_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct virtio_chan *chan;
+	struct virtio_device *vdev;
+
+	vdev = dev_to_virtio(dev);
+	chan = vdev->priv;
+
+	return snprintf(buf, chan->tag_len + 1, "%s", chan->tag);
+}
+
+static DEVICE_ATTR(mount_tag, 0444, p9_mount_tag_show, NULL);
+
 /**
  * p9_virtio_probe - probe for existence of 9P virtio channels
  * @vdev: virtio device to probe
@@ -224,6 +244,8 @@ p9_virtio_request(struct p9_client *client, struct p9_req_t *req)
 
 static int p9_virtio_probe(struct virtio_device *vdev)
 {
+	__u16 tag_len;
+	char *tag;
 	int err;
 	struct virtio_chan *chan;
 
@@ -248,6 +270,28 @@ static int p9_virtio_probe(struct virtio_device *vdev)
 	sg_init_table(chan->sg, VIRTQUEUE_NUM);
 
 	chan->inuse = false;
+	if (virtio_has_feature(vdev, VIRTIO_9P_MOUNT_TAG)) {
+		vdev->config->get(vdev,
+				offsetof(struct virtio_9p_config, tag_len),
+				&tag_len, sizeof(tag_len));
+	} else {
+		err = -EINVAL;
+		goto out_free_vq;
+	}
+	tag = kmalloc(tag_len, GFP_KERNEL);
+	if (!tag) {
+		err = -ENOMEM;
+		goto out_free_vq;
+	}
+	vdev->config->get(vdev, offsetof(struct virtio_9p_config, tag),
+			tag, tag_len);
+	chan->tag = tag;
+	chan->tag_len = tag_len;
+	err = sysfs_create_file(&(vdev->dev.kobj), &dev_attr_mount_tag.attr);
+	if (err) {
+		kfree(tag);
+		goto out_free_vq;
+	}
 	mutex_lock(&virtio_9p_lock);
 	list_add_tail(&chan->chan_list, &virtio_chan_list);
 	mutex_unlock(&virtio_9p_lock);
@@ -284,7 +328,7 @@ p9_virtio_create(struct p9_client *client, const char *devname, char *args)
 
 	mutex_lock(&virtio_9p_lock);
 	list_for_each_entry(chan, &virtio_chan_list, chan_list) {
-		if (!strcmp(devname, dev_name(&chan->vdev->dev))) {
+		if (!strncmp(devname, chan->tag, chan->tag_len)) {
 			if (!chan->inuse) {
 				chan->inuse = true;
 				found = 1;
@@ -323,6 +367,8 @@ static void p9_virtio_remove(struct virtio_device *vdev)
 	mutex_lock(&virtio_9p_lock);
 	list_del(&chan->chan_list);
 	mutex_unlock(&virtio_9p_lock);
+	sysfs_remove_file(&(vdev->dev.kobj), &dev_attr_mount_tag.attr);
+	kfree(chan->tag);
 	kfree(chan);
 
 }
@@ -332,13 +378,19 @@ static struct virtio_device_id id_table[] = {
 	{ 0 },
 };
 
+static unsigned int features[] = {
+	VIRTIO_9P_MOUNT_TAG,
+};
+
 /* The standard "struct lguest_driver": */
 static struct virtio_driver p9_virtio_drv = {
-	.driver.name = 	KBUILD_MODNAME,
-	.driver.owner = THIS_MODULE,
-	.id_table =	id_table,
-	.probe = 	p9_virtio_probe,
-	.remove =	p9_virtio_remove,
+	.feature_table  = features,
+	.feature_table_size = ARRAY_SIZE(features),
+	.driver.name    = KBUILD_MODNAME,
+	.driver.owner	= THIS_MODULE,
+	.id_table	= id_table,
+	.probe		= p9_virtio_probe,
+	.remove		= p9_virtio_remove,
 };
 
 static struct p9_trans_module p9_virtio_trans = {
diff --git a/net/bluetooth/hci_sysfs.c b/net/bluetooth/hci_sysfs.c
index 1a79a6c7e30e..cafb55b0cea5 100644
--- a/net/bluetooth/hci_sysfs.c
+++ b/net/bluetooth/hci_sysfs.c
@@ -3,6 +3,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/debugfs.h>
+#include <linux/seq_file.h>
 
 #include <net/bluetooth/bluetooth.h>
 #include <net/bluetooth/hci_core.h>
@@ -405,20 +406,11 @@ static struct device_type bt_host = {
 	.release = bt_host_release,
 };
 
-static int inquiry_cache_open(struct inode *inode, struct file *file)
-{
-	file->private_data = inode->i_private;
-	return 0;
-}
-
-static ssize_t inquiry_cache_read(struct file *file, char __user *userbuf,
-						size_t count, loff_t *ppos)
+static int inquiry_cache_show(struct seq_file *f, void *p)
 {
-	struct hci_dev *hdev = file->private_data;
+	struct hci_dev *hdev = f->private;
 	struct inquiry_cache *cache = &hdev->inq_cache;
 	struct inquiry_entry *e;
-	char buf[4096];
-	int n = 0;
 
 	hci_dev_lock_bh(hdev);
 
@@ -426,23 +418,30 @@ static ssize_t inquiry_cache_read(struct file *file, char __user *userbuf,
 		struct inquiry_data *data = &e->data;
 		bdaddr_t bdaddr;
 		baswap(&bdaddr, &data->bdaddr);
-		n += sprintf(buf + n, "%s %d %d %d 0x%.2x%.2x%.2x 0x%.4x %d %d %u\n",
-				batostr(&bdaddr),
-				data->pscan_rep_mode, data->pscan_period_mode,
-				data->pscan_mode, data->dev_class[2],
-				data->dev_class[1], data->dev_class[0],
-				__le16_to_cpu(data->clock_offset),
-				data->rssi, data->ssp_mode, e->timestamp);
+		seq_printf(f, "%s %d %d %d 0x%.2x%.2x%.2x 0x%.4x %d %d %u\n",
+			   batostr(&bdaddr),
+			   data->pscan_rep_mode, data->pscan_period_mode,
+			   data->pscan_mode, data->dev_class[2],
+			   data->dev_class[1], data->dev_class[0],
+			   __le16_to_cpu(data->clock_offset),
+			   data->rssi, data->ssp_mode, e->timestamp);
 	}
 
 	hci_dev_unlock_bh(hdev);
 
-	return simple_read_from_buffer(userbuf, count, ppos, buf, n);
+	return 0;
+}
+
+static int inquiry_cache_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, inquiry_cache_show, inode->i_private);
 }
 
 static const struct file_operations inquiry_cache_fops = {
-	.open = inquiry_cache_open,
-	.read = inquiry_cache_read,
+	.open		= inquiry_cache_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
 };
 
 int hci_register_sysfs(struct hci_dev *hdev)
diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c
index 400efa26ddba..4db7ae2fe07d 100644
--- a/net/bluetooth/l2cap.c
+++ b/net/bluetooth/l2cap.c
@@ -3937,7 +3937,9 @@ drop:
 	return 0;
 }
 
-static ssize_t l2cap_sysfs_show(struct class *dev, char *buf)
+static ssize_t l2cap_sysfs_show(struct class *dev,
+				struct class_attribute *attr,
+				char *buf)
 {
 	struct sock *sk;
 	struct hlist_node *node;
diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c
index 89f4a59eb82b..db8a68e1a5ba 100644
--- a/net/bluetooth/rfcomm/core.c
+++ b/net/bluetooth/rfcomm/core.c
@@ -2098,7 +2098,9 @@ static struct hci_cb rfcomm_cb = {
 	.security_cfm	= rfcomm_security_cfm
 };
 
-static ssize_t rfcomm_dlc_sysfs_show(struct class *dev, char *buf)
+static ssize_t rfcomm_dlc_sysfs_show(struct class *dev,
+				     struct class_attribute *attr,
+				     char *buf)
 {
 	struct rfcomm_session *s;
 	struct list_head *pp, *p;
diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c
index 4b5968dda673..ca87d6ac6a20 100644
--- a/net/bluetooth/rfcomm/sock.c
+++ b/net/bluetooth/rfcomm/sock.c
@@ -1061,7 +1061,9 @@ done:
 	return result;
 }
 
-static ssize_t rfcomm_sock_sysfs_show(struct class *dev, char *buf)
+static ssize_t rfcomm_sock_sysfs_show(struct class *dev,
+				      struct class_attribute *attr,
+				      char *buf)
 {
 	struct sock *sk;
 	struct hlist_node *node;
diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c
index dd8f6ec57dce..f93b939539bc 100644
--- a/net/bluetooth/sco.c
+++ b/net/bluetooth/sco.c
@@ -953,7 +953,9 @@ drop:
 	return 0;
 }
 
-static ssize_t sco_sysfs_show(struct class *dev, char *buf)
+static ssize_t sco_sysfs_show(struct class *dev,
+				struct class_attribute *attr,
+				char *buf)
 {
 	struct sock *sk;
 	struct hlist_node *node;
diff --git a/net/bridge/Kconfig b/net/bridge/Kconfig
index 19a6b9629c51..d115d5cea5b6 100644
--- a/net/bridge/Kconfig
+++ b/net/bridge/Kconfig
@@ -35,6 +35,7 @@ config BRIDGE
 config BRIDGE_IGMP_SNOOPING
 	bool "IGMP snooping"
 	depends on BRIDGE
+	depends on INET
 	default y
 	---help---
 	  If you say Y here, then the Ethernet bridge will be able selectively
diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c
index eb7062d2e9e5..90a9024e5c1e 100644
--- a/net/bridge/br_device.c
+++ b/net/bridge/br_device.c
@@ -40,7 +40,7 @@ netdev_tx_t br_dev_xmit(struct sk_buff *skb, struct net_device *dev)
 			goto out;
 
 		mdst = br_mdb_get(br, skb);
-		if (mdst || BR_INPUT_SKB_CB(skb)->mrouters_only)
+		if (mdst || BR_INPUT_SKB_CB_MROUTERS_ONLY(skb))
 			br_multicast_deliver(mdst, skb);
 		else
 			br_flood_deliver(br, skb);
diff --git a/net/bridge/br_forward.c b/net/bridge/br_forward.c
index d61e6f741125..8dbec83e50ca 100644
--- a/net/bridge/br_forward.c
+++ b/net/bridge/br_forward.c
@@ -19,6 +19,11 @@
 #include <linux/netfilter_bridge.h>
 #include "br_private.h"
 
+static int deliver_clone(const struct net_bridge_port *prev,
+			 struct sk_buff *skb,
+			 void (*__packet_hook)(const struct net_bridge_port *p,
+					       struct sk_buff *skb));
+
 /* Don't forward packets to originating port or forwarding diasabled */
 static inline int should_deliver(const struct net_bridge_port *p,
 				 const struct sk_buff *skb)
@@ -94,17 +99,22 @@ void br_deliver(const struct net_bridge_port *to, struct sk_buff *skb)
 }
 
 /* called with rcu_read_lock */
-void br_forward(const struct net_bridge_port *to, struct sk_buff *skb)
+void br_forward(const struct net_bridge_port *to, struct sk_buff *skb, struct sk_buff *skb0)
 {
 	if (should_deliver(to, skb)) {
-		__br_forward(to, skb);
+		if (skb0)
+			deliver_clone(to, skb, __br_forward);
+		else
+			__br_forward(to, skb);
 		return;
 	}
 
-	kfree_skb(skb);
+	if (!skb0)
+		kfree_skb(skb);
 }
 
-static int deliver_clone(struct net_bridge_port *prev, struct sk_buff *skb,
+static int deliver_clone(const struct net_bridge_port *prev,
+			 struct sk_buff *skb,
 			 void (*__packet_hook)(const struct net_bridge_port *p,
 					       struct sk_buff *skb))
 {
diff --git a/net/bridge/br_input.c b/net/bridge/br_input.c
index 53b39851d87d..d74d570fc848 100644
--- a/net/bridge/br_input.c
+++ b/net/bridge/br_input.c
@@ -70,7 +70,7 @@ int br_handle_frame_finish(struct sk_buff *skb)
 
 	if (is_multicast_ether_addr(dest)) {
 		mdst = br_mdb_get(br, skb);
-		if (mdst || BR_INPUT_SKB_CB(skb)->mrouters_only) {
+		if (mdst || BR_INPUT_SKB_CB_MROUTERS_ONLY(skb)) {
 			if ((mdst && !hlist_unhashed(&mdst->mglist)) ||
 			    br_multicast_is_router(br))
 				skb2 = skb;
@@ -90,7 +90,7 @@ int br_handle_frame_finish(struct sk_buff *skb)
 
 	if (skb) {
 		if (dst)
-			br_forward(dst->dst, skb);
+			br_forward(dst->dst, skb, skb2);
 		else
 			br_flood_forward(br, skb, skb2);
 	}
diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c
index 2559fb539836..6980625537ca 100644
--- a/net/bridge/br_multicast.c
+++ b/net/bridge/br_multicast.c
@@ -38,7 +38,7 @@ static struct net_bridge_mdb_entry *__br_mdb_ip_get(
 	struct net_bridge_mdb_entry *mp;
 	struct hlist_node *p;
 
-	hlist_for_each_entry(mp, p, &mdb->mhash[hash], hlist[mdb->ver]) {
+	hlist_for_each_entry_rcu(mp, p, &mdb->mhash[hash], hlist[mdb->ver]) {
 		if (dst == mp->addr)
 			return mp;
 	}
@@ -49,22 +49,23 @@ static struct net_bridge_mdb_entry *__br_mdb_ip_get(
 static struct net_bridge_mdb_entry *br_mdb_ip_get(
 	struct net_bridge_mdb_htable *mdb, __be32 dst)
 {
+	if (!mdb)
+		return NULL;
+
 	return __br_mdb_ip_get(mdb, dst, br_ip_hash(mdb, dst));
 }
 
 struct net_bridge_mdb_entry *br_mdb_get(struct net_bridge *br,
 					struct sk_buff *skb)
 {
-	struct net_bridge_mdb_htable *mdb = br->mdb;
-
-	if (!mdb || br->multicast_disabled)
+	if (br->multicast_disabled)
 		return NULL;
 
 	switch (skb->protocol) {
 	case htons(ETH_P_IP):
 		if (BR_INPUT_SKB_CB(skb)->igmp)
 			break;
-		return br_mdb_ip_get(mdb, ip_hdr(skb)->daddr);
+		return br_mdb_ip_get(br->mdb, ip_hdr(skb)->daddr);
 	}
 
 	return NULL;
@@ -627,8 +628,8 @@ static void br_multicast_port_query_expired(unsigned long data)
 	struct net_bridge *br = port->br;
 
 	spin_lock(&br->multicast_lock);
-	if (port && (port->state == BR_STATE_DISABLED ||
-		     port->state == BR_STATE_BLOCKING))
+	if (port->state == BR_STATE_DISABLED ||
+	    port->state == BR_STATE_BLOCKING)
 		goto out;
 
 	if (port->multicast_startup_queries_sent <
@@ -823,6 +824,7 @@ static int br_multicast_query(struct net_bridge *br,
 	unsigned long max_delay;
 	unsigned long now = jiffies;
 	__be32 group;
+	int err = 0;
 
 	spin_lock(&br->multicast_lock);
 	if (!netif_running(br->dev) ||
@@ -841,15 +843,17 @@ static int br_multicast_query(struct net_bridge *br,
 			group = 0;
 		}
 	} else {
-		if (!pskb_may_pull(skb, sizeof(struct igmpv3_query)))
-			return -EINVAL;
+		if (!pskb_may_pull(skb, sizeof(struct igmpv3_query))) {
+			err = -EINVAL;
+			goto out;
+		}
 
 		ih3 = igmpv3_query_hdr(skb);
 		if (ih3->nsrcs)
-			return 0;
+			goto out;
 
-		max_delay = ih3->code ? 1 :
-			    IGMPV3_MRC(ih3->code) * (HZ / IGMP_TIMER_SCALE);
+		max_delay = ih3->code ?
+			    IGMPV3_MRC(ih3->code) * (HZ / IGMP_TIMER_SCALE) : 1;
 	}
 
 	if (!group)
@@ -876,7 +880,7 @@ static int br_multicast_query(struct net_bridge *br,
 
 out:
 	spin_unlock(&br->multicast_lock);
-	return 0;
+	return err;
 }
 
 static void br_multicast_leave_group(struct net_bridge *br,
@@ -987,7 +991,7 @@ static int br_multicast_ipv4_rcv(struct net_bridge *br,
 
 		err = pskb_trim_rcsum(skb2, len);
 		if (err)
-			return err;
+			goto err_out;
 	}
 
 	len -= ip_hdrlen(skb2);
@@ -1009,7 +1013,7 @@ static int br_multicast_ipv4_rcv(struct net_bridge *br,
 	case CHECKSUM_NONE:
 		skb2->csum = 0;
 		if (skb_checksum_complete(skb2))
-			return -EINVAL;
+			goto out;
 	}
 
 	err = 0;
@@ -1036,6 +1040,7 @@ static int br_multicast_ipv4_rcv(struct net_bridge *br,
 
 out:
 	__skb_push(skb2, offset);
+err_out:
 	if (skb2 != skb)
 		kfree_skb(skb2);
 	return err;
@@ -1135,7 +1140,7 @@ void br_multicast_stop(struct net_bridge *br)
 
 	if (mdb->old) {
 		spin_unlock_bh(&br->multicast_lock);
-		synchronize_rcu_bh();
+		rcu_barrier_bh();
 		spin_lock_bh(&br->multicast_lock);
 		WARN_ON(mdb->old);
 	}
diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h
index 1cf2cef78584..846d7d1e2075 100644
--- a/net/bridge/br_private.h
+++ b/net/bridge/br_private.h
@@ -206,12 +206,20 @@ struct net_bridge
 
 struct br_input_skb_cb {
 	struct net_device *brdev;
+#ifdef CONFIG_BRIDGE_IGMP_SNOOPING
 	int igmp;
 	int mrouters_only;
+#endif
 };
 
 #define BR_INPUT_SKB_CB(__skb)	((struct br_input_skb_cb *)(__skb)->cb)
 
+#ifdef CONFIG_BRIDGE_IGMP_SNOOPING
+# define BR_INPUT_SKB_CB_MROUTERS_ONLY(__skb)	(BR_INPUT_SKB_CB(__skb)->mrouters_only)
+#else
+# define BR_INPUT_SKB_CB_MROUTERS_ONLY(__skb)	(0)
+#endif
+
 extern struct notifier_block br_device_notifier;
 extern const u8 br_group_address[ETH_ALEN];
 
@@ -252,7 +260,7 @@ extern void br_deliver(const struct net_bridge_port *to,
 		struct sk_buff *skb);
 extern int br_dev_queue_push_xmit(struct sk_buff *skb);
 extern void br_forward(const struct net_bridge_port *to,
-		struct sk_buff *skb);
+		struct sk_buff *skb, struct sk_buff *skb0);
 extern int br_forward_finish(struct sk_buff *skb);
 extern void br_flood_deliver(struct net_bridge *br, struct sk_buff *skb);
 extern void br_flood_forward(struct net_bridge *br, struct sk_buff *skb,
@@ -423,7 +431,7 @@ extern void br_ifinfo_notify(int event, struct net_bridge_port *port);
 
 #ifdef CONFIG_SYSFS
 /* br_sysfs_if.c */
-extern struct sysfs_ops brport_sysfs_ops;
+extern const struct sysfs_ops brport_sysfs_ops;
 extern int br_sysfs_addif(struct net_bridge_port *p);
 
 /* br_sysfs_br.c */
diff --git a/net/bridge/br_sysfs_if.c b/net/bridge/br_sysfs_if.c
index 696596cd3384..0b9916489d6b 100644
--- a/net/bridge/br_sysfs_if.c
+++ b/net/bridge/br_sysfs_if.c
@@ -238,7 +238,7 @@ static ssize_t brport_store(struct kobject * kobj,
 	return ret;
 }
 
-struct sysfs_ops brport_sysfs_ops = {
+const struct sysfs_ops brport_sysfs_ops = {
 	.show = brport_show,
 	.store = brport_store,
 };
diff --git a/net/core/dev_mcast.c b/net/core/dev_mcast.c
index fd91569e2394..3dc295beb483 100644
--- a/net/core/dev_mcast.c
+++ b/net/core/dev_mcast.c
@@ -97,8 +97,9 @@ int dev_mc_add(struct net_device *dev, void *addr, int alen, int glbl)
 
 	netif_addr_lock_bh(dev);
 	if (alen != dev->addr_len)
-		return -EINVAL;
-	err = __dev_addr_add(&dev->mc_list, &dev->mc_count, addr, alen, glbl);
+		err = -EINVAL;
+	else
+		err = __dev_addr_add(&dev->mc_list, &dev->mc_count, addr, alen, glbl);
 	if (!err)
 		__dev_set_rx_mode(dev);
 	netif_addr_unlock_bh(dev);
diff --git a/net/core/ethtool.c b/net/core/ethtool.c
index 0f2f82185ec4..f4cb6b6299d9 100644
--- a/net/core/ethtool.c
+++ b/net/core/ethtool.c
@@ -17,6 +17,7 @@
 #include <linux/errno.h>
 #include <linux/ethtool.h>
 #include <linux/netdevice.h>
+#include <linux/bitops.h>
 #include <asm/uaccess.h>
 
 /*
@@ -199,10 +200,7 @@ static int ethtool_set_settings(struct net_device *dev, void __user *useraddr)
 	return dev->ethtool_ops->set_settings(dev, &cmd);
 }
 
-/*
- * noinline attribute so that gcc doesnt use too much stack in dev_ethtool()
- */
-static noinline int ethtool_get_drvinfo(struct net_device *dev, void __user *useraddr)
+static noinline_for_stack int ethtool_get_drvinfo(struct net_device *dev, void __user *useraddr)
 {
 	struct ethtool_drvinfo info;
 	const struct ethtool_ops *ops = dev->ethtool_ops;
@@ -214,6 +212,10 @@ static noinline int ethtool_get_drvinfo(struct net_device *dev, void __user *use
 	info.cmd = ETHTOOL_GDRVINFO;
 	ops->get_drvinfo(dev, &info);
 
+	/*
+	 * this method of obtaining string set info is deprecated;
+	 * Use ETHTOOL_GSSET_INFO instead.
+	 */
 	if (ops->get_sset_count) {
 		int rc;
 
@@ -237,10 +239,67 @@ static noinline int ethtool_get_drvinfo(struct net_device *dev, void __user *use
 	return 0;
 }
 
-/*
- * noinline attribute so that gcc doesnt use too much stack in dev_ethtool()
- */
-static noinline int ethtool_set_rxnfc(struct net_device *dev, void __user *useraddr)
+static noinline_for_stack int ethtool_get_sset_info(struct net_device *dev,
+                                          void __user *useraddr)
+{
+	struct ethtool_sset_info info;
+	const struct ethtool_ops *ops = dev->ethtool_ops;
+	u64 sset_mask;
+	int i, idx = 0, n_bits = 0, ret, rc;
+	u32 *info_buf = NULL;
+
+	if (!ops->get_sset_count)
+		return -EOPNOTSUPP;
+
+	if (copy_from_user(&info, useraddr, sizeof(info)))
+		return -EFAULT;
+
+	/* store copy of mask, because we zero struct later on */
+	sset_mask = info.sset_mask;
+	if (!sset_mask)
+		return 0;
+
+	/* calculate size of return buffer */
+	n_bits = hweight64(sset_mask);
+
+	memset(&info, 0, sizeof(info));
+	info.cmd = ETHTOOL_GSSET_INFO;
+
+	info_buf = kzalloc(n_bits * sizeof(u32), GFP_USER);
+	if (!info_buf)
+		return -ENOMEM;
+
+	/*
+	 * fill return buffer based on input bitmask and successful
+	 * get_sset_count return
+	 */
+	for (i = 0; i < 64; i++) {
+		if (!(sset_mask & (1ULL << i)))
+			continue;
+
+		rc = ops->get_sset_count(dev, i);
+		if (rc >= 0) {
+			info.sset_mask |= (1ULL << i);
+			info_buf[idx++] = rc;
+		}
+	}
+
+	ret = -EFAULT;
+	if (copy_to_user(useraddr, &info, sizeof(info)))
+		goto out;
+
+	useraddr += offsetof(struct ethtool_sset_info, data);
+	if (copy_to_user(useraddr, info_buf, idx * sizeof(u32)))
+		goto out;
+
+	ret = 0;
+
+out:
+	kfree(info_buf);
+	return ret;
+}
+
+static noinline_for_stack int ethtool_set_rxnfc(struct net_device *dev, void __user *useraddr)
 {
 	struct ethtool_rxnfc cmd;
 
@@ -253,10 +312,7 @@ static noinline int ethtool_set_rxnfc(struct net_device *dev, void __user *usera
 	return dev->ethtool_ops->set_rxnfc(dev, &cmd);
 }
 
-/*
- * noinline attribute so that gcc doesnt use too much stack in dev_ethtool()
- */
-static noinline int ethtool_get_rxnfc(struct net_device *dev, void __user *useraddr)
+static noinline_for_stack int ethtool_get_rxnfc(struct net_device *dev, void __user *useraddr)
 {
 	struct ethtool_rxnfc info;
 	const struct ethtool_ops *ops = dev->ethtool_ops;
@@ -328,10 +384,7 @@ static void __rx_ntuple_filter_add(struct ethtool_rx_ntuple_list *list,
 	list->count++;
 }
 
-/*
- * noinline attribute so that gcc doesnt use too much stack in dev_ethtool()
- */
-static noinline int ethtool_set_rx_ntuple(struct net_device *dev, void __user *useraddr)
+static noinline_for_stack int ethtool_set_rx_ntuple(struct net_device *dev, void __user *useraddr)
 {
 	struct ethtool_rx_ntuple cmd;
 	const struct ethtool_ops *ops = dev->ethtool_ops;
@@ -799,10 +852,7 @@ static int ethtool_set_eeprom(struct net_device *dev, void __user *useraddr)
 	return ret;
 }
 
-/*
- * noinline attribute so that gcc doesnt use too much stack in dev_ethtool()
- */
-static noinline int ethtool_get_coalesce(struct net_device *dev, void __user *useraddr)
+static noinline_for_stack int ethtool_get_coalesce(struct net_device *dev, void __user *useraddr)
 {
 	struct ethtool_coalesce coalesce = { .cmd = ETHTOOL_GCOALESCE };
 
@@ -816,10 +866,7 @@ static noinline int ethtool_get_coalesce(struct net_device *dev, void __user *us
 	return 0;
 }
 
-/*
- * noinline attribute so that gcc doesnt use too much stack in dev_ethtool()
- */
-static noinline int ethtool_set_coalesce(struct net_device *dev, void __user *useraddr)
+static noinline_for_stack int ethtool_set_coalesce(struct net_device *dev, void __user *useraddr)
 {
 	struct ethtool_coalesce coalesce;
 
@@ -1229,10 +1276,7 @@ static int ethtool_set_value(struct net_device *dev, char __user *useraddr,
 	return actor(dev, edata.data);
 }
 
-/*
- * noinline attribute so that gcc doesnt use too much stack in dev_ethtool()
- */
-static noinline int ethtool_flash_device(struct net_device *dev, char __user *useraddr)
+static noinline_for_stack int ethtool_flash_device(struct net_device *dev, char __user *useraddr)
 {
 	struct ethtool_flash efl;
 
@@ -1471,6 +1515,9 @@ int dev_ethtool(struct net *net, struct ifreq *ifr)
 	case ETHTOOL_GRXNTUPLE:
 		rc = ethtool_get_rx_ntuple(dev, useraddr);
 		break;
+	case ETHTOOL_GSSET_INFO:
+		rc = ethtool_get_sset_info(dev, useraddr);
+		break;
 	default:
 		rc = -EOPNOTSUPP;
 	}
diff --git a/net/core/neighbour.c b/net/core/neighbour.c
index d102f6d9abdc..6cee6434da67 100644
--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -771,6 +771,8 @@ static __inline__ int neigh_max_probes(struct neighbour *n)
 }
 
 static void neigh_invalidate(struct neighbour *neigh)
+	__releases(neigh->lock)
+	__acquires(neigh->lock)
 {
 	struct sk_buff *skb;
 
diff --git a/net/core/netpoll.c b/net/core/netpoll.c
index 7aa697253765..d4ec38fa64e6 100644
--- a/net/core/netpoll.c
+++ b/net/core/netpoll.c
@@ -735,7 +735,7 @@ int netpoll_setup(struct netpoll *np)
 		npinfo = kmalloc(sizeof(*npinfo), GFP_KERNEL);
 		if (!npinfo) {
 			err = -ENOMEM;
-			goto release;
+			goto put;
 		}
 
 		npinfo->rx_flags = 0;
@@ -845,7 +845,7 @@ int netpoll_setup(struct netpoll *np)
 
 		kfree(npinfo);
 	}
-
+put:
 	dev_put(ndev);
 	return err;
 }
diff --git a/net/core/sock.c b/net/core/sock.c
index fcd397a762ff..c5812bbc2cc9 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -340,8 +340,12 @@ int sk_receive_skb(struct sock *sk, struct sk_buff *skb, const int nested)
 		rc = sk_backlog_rcv(sk, skb);
 
 		mutex_release(&sk->sk_lock.dep_map, 1, _RET_IP_);
-	} else
-		sk_add_backlog(sk, skb);
+	} else if (sk_add_backlog(sk, skb)) {
+		bh_unlock_sock(sk);
+		atomic_inc(&sk->sk_drops);
+		goto discard_and_relse;
+	}
+
 	bh_unlock_sock(sk);
 out:
 	sock_put(sk);
@@ -1139,6 +1143,7 @@ struct sock *sk_clone(const struct sock *sk, const gfp_t priority)
 		sock_lock_init(newsk);
 		bh_lock_sock(newsk);
 		newsk->sk_backlog.head	= newsk->sk_backlog.tail = NULL;
+		newsk->sk_backlog.len = 0;
 
 		atomic_set(&newsk->sk_rmem_alloc, 0);
 		/*
@@ -1542,6 +1547,12 @@ static void __release_sock(struct sock *sk)
 
 		bh_lock_sock(sk);
 	} while ((skb = sk->sk_backlog.head) != NULL);
+
+	/*
+	 * Doing the zeroing here guarantee we can not loop forever
+	 * while a wild producer attempts to flood us.
+	 */
+	sk->sk_backlog.len = 0;
 }
 
 /**
@@ -1874,6 +1885,7 @@ void sock_init_data(struct socket *sock, struct sock *sk)
 	sk->sk_allocation	=	GFP_KERNEL;
 	sk->sk_rcvbuf		=	sysctl_rmem_default;
 	sk->sk_sndbuf		=	sysctl_wmem_default;
+	sk->sk_backlog.limit	=	sk->sk_rcvbuf << 1;
 	sk->sk_state		=	TCP_CLOSE;
 	sk_set_socket(sk, sock);
 
@@ -2276,7 +2288,8 @@ out_free_request_sock_slab:
 		prot->rsk_prot->slab = NULL;
 	}
 out_free_request_sock_slab_name:
-	kfree(prot->rsk_prot->slab_name);
+	if (prot->rsk_prot)
+		kfree(prot->rsk_prot->slab_name);
 out_free_sock_slab:
 	kmem_cache_destroy(prot->slab);
 	prot->slab = NULL;
diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c
index b195c4feaa0a..4071eaf2b361 100644
--- a/net/dccp/ipv4.c
+++ b/net/dccp/ipv4.c
@@ -998,11 +998,11 @@ static struct inet_protosw dccp_v4_protosw = {
 
 static int __net_init dccp_v4_init_net(struct net *net)
 {
-	int err;
+	if (dccp_hashinfo.bhash == NULL)
+		return -ESOCKTNOSUPPORT;
 
-	err = inet_ctl_sock_create(&net->dccp.v4_ctl_sk, PF_INET,
-				   SOCK_DCCP, IPPROTO_DCCP, net);
-	return err;
+	return inet_ctl_sock_create(&net->dccp.v4_ctl_sk, PF_INET,
+				    SOCK_DCCP, IPPROTO_DCCP, net);
 }
 
 static void __net_exit dccp_v4_exit_net(struct net *net)
diff --git a/net/dccp/ipv6.c b/net/dccp/ipv6.c
index 1aec6349e858..af3394df63b7 100644
--- a/net/dccp/ipv6.c
+++ b/net/dccp/ipv6.c
@@ -1191,11 +1191,11 @@ static struct inet_protosw dccp_v6_protosw = {
 
 static int __net_init dccp_v6_init_net(struct net *net)
 {
-	int err;
+	if (dccp_hashinfo.bhash == NULL)
+		return -ESOCKTNOSUPPORT;
 
-	err = inet_ctl_sock_create(&net->dccp.v6_ctl_sk, PF_INET6,
-				   SOCK_DCCP, IPPROTO_DCCP, net);
-	return err;
+	return inet_ctl_sock_create(&net->dccp.v6_ctl_sk, PF_INET6,
+				    SOCK_DCCP, IPPROTO_DCCP, net);
 }
 
 static void __net_exit dccp_v6_exit_net(struct net *net)
diff --git a/net/dccp/minisocks.c b/net/dccp/minisocks.c
index af226a063141..0d508c359fa9 100644
--- a/net/dccp/minisocks.c
+++ b/net/dccp/minisocks.c
@@ -254,7 +254,7 @@ int dccp_child_process(struct sock *parent, struct sock *child,
 		 * in main socket hash table and lock on listening
 		 * socket does not protect us more.
 		 */
-		sk_add_backlog(child, skb);
+		__sk_add_backlog(child, skb);
 	}
 
 	bh_unlock_sock(child);
diff --git a/net/dccp/proto.c b/net/dccp/proto.c
index 0ef7061920c0..aa4cef374fd0 100644
--- a/net/dccp/proto.c
+++ b/net/dccp/proto.c
@@ -1036,7 +1036,7 @@ static int __init dccp_init(void)
 		     FIELD_SIZEOF(struct sk_buff, cb));
 	rc = percpu_counter_init(&dccp_orphan_count, 0);
 	if (rc)
-		goto out;
+		goto out_fail;
 	rc = -ENOBUFS;
 	inet_hashinfo_init(&dccp_hashinfo);
 	dccp_hashinfo.bind_bucket_cachep =
@@ -1125,8 +1125,9 @@ static int __init dccp_init(void)
 		goto out_sysctl_exit;
 
 	dccp_timestamping_init();
-out:
-	return rc;
+
+	return 0;
+
 out_sysctl_exit:
 	dccp_sysctl_exit();
 out_ackvec_exit:
@@ -1135,18 +1136,19 @@ out_free_dccp_mib:
 	dccp_mib_exit();
 out_free_dccp_bhash:
 	free_pages((unsigned long)dccp_hashinfo.bhash, bhash_order);
-	dccp_hashinfo.bhash = NULL;
 out_free_dccp_locks:
 	inet_ehash_locks_free(&dccp_hashinfo);
 out_free_dccp_ehash:
 	free_pages((unsigned long)dccp_hashinfo.ehash, ehash_order);
-	dccp_hashinfo.ehash = NULL;
 out_free_bind_bucket_cachep:
 	kmem_cache_destroy(dccp_hashinfo.bind_bucket_cachep);
-	dccp_hashinfo.bind_bucket_cachep = NULL;
 out_free_percpu:
 	percpu_counter_destroy(&dccp_orphan_count);
-	goto out;
+out_fail:
+	dccp_hashinfo.bhash = NULL;
+	dccp_hashinfo.ehash = NULL;
+	dccp_hashinfo.bind_bucket_cachep = NULL;
+	return rc;
 }
 
 static void __exit dccp_fini(void)
diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c
index c0c5274d0271..f47c9f76754b 100644
--- a/net/ipv4/ip_gre.c
+++ b/net/ipv4/ip_gre.c
@@ -1144,12 +1144,9 @@ static int ipgre_header(struct sk_buff *skb, struct net_device *dev,
 
 	if (saddr)
 		memcpy(&iph->saddr, saddr, 4);
-
-	if (daddr) {
+	if (daddr)
 		memcpy(&iph->daddr, daddr, 4);
-		return t->hlen;
-	}
-	if (iph->daddr && !ipv4_is_multicast(iph->daddr))
+	if (iph->daddr)
 		return t->hlen;
 
 	return -t->hlen;
diff --git a/net/ipv4/ipconfig.c b/net/ipv4/ipconfig.c
index 10a6a604bf32..678909281648 100644
--- a/net/ipv4/ipconfig.c
+++ b/net/ipv4/ipconfig.c
@@ -187,6 +187,16 @@ struct ic_device {
 static struct ic_device *ic_first_dev __initdata = NULL;/* List of open device */
 static struct net_device *ic_dev __initdata = NULL;	/* Selected device */
 
+static bool __init ic_device_match(struct net_device *dev)
+{
+	if (user_dev_name[0] ? !strcmp(dev->name, user_dev_name) :
+	    (!(dev->flags & IFF_LOOPBACK) &&
+	     (dev->flags & (IFF_POINTOPOINT|IFF_BROADCAST)) &&
+	     strncmp(dev->name, "dummy", 5)))
+		return true;
+	return false;
+}
+
 static int __init ic_open_devs(void)
 {
 	struct ic_device *d, **last;
@@ -207,10 +217,7 @@ static int __init ic_open_devs(void)
 	for_each_netdev(&init_net, dev) {
 		if (dev->flags & IFF_LOOPBACK)
 			continue;
-		if (user_dev_name[0] ? !strcmp(dev->name, user_dev_name) :
-		    (!(dev->flags & IFF_LOOPBACK) &&
-		     (dev->flags & (IFF_POINTOPOINT|IFF_BROADCAST)) &&
-		     strncmp(dev->name, "dummy", 5))) {
+		if (ic_device_match(dev)) {
 			int able = 0;
 			if (dev->mtu >= 364)
 				able |= IC_BOOTP;
@@ -228,7 +235,7 @@ static int __init ic_open_devs(void)
 			}
 			if (!(d = kmalloc(sizeof(struct ic_device), GFP_KERNEL))) {
 				rtnl_unlock();
-				return -1;
+				return -ENOMEM;
 			}
 			d->dev = dev;
 			*last = d;
@@ -253,7 +260,7 @@ static int __init ic_open_devs(void)
 			printk(KERN_ERR "IP-Config: Device `%s' not found.\n", user_dev_name);
 		else
 			printk(KERN_ERR "IP-Config: No network devices available.\n");
-		return -1;
+		return -ENODEV;
 	}
 	return 0;
 }
@@ -1303,6 +1310,32 @@ __be32 __init root_nfs_parse_addr(char *name)
 	return addr;
 }
 
+#define DEVICE_WAIT_MAX		12 /* 12 seconds */
+
+static int __init wait_for_devices(void)
+{
+	int i;
+
+	msleep(CONF_PRE_OPEN);
+	for (i = 0; i < DEVICE_WAIT_MAX; i++) {
+		struct net_device *dev;
+		int found = 0;
+
+		rtnl_lock();
+		for_each_netdev(&init_net, dev) {
+			if (ic_device_match(dev)) {
+				found = 1;
+				break;
+			}
+		}
+		rtnl_unlock();
+		if (found)
+			return 0;
+		ssleep(1);
+	}
+	return -ENODEV;
+}
+
 /*
  *	IP Autoconfig dispatcher.
  */
@@ -1313,6 +1346,7 @@ static int __init ip_auto_config(void)
 #ifdef IPCONFIG_DYNAMIC
 	int retries = CONF_OPEN_RETRIES;
 #endif
+	int err;
 
 #ifdef CONFIG_PROC_FS
 	proc_net_fops_create(&init_net, "pnp", S_IRUGO, &pnp_seq_fops);
@@ -1325,12 +1359,15 @@ static int __init ip_auto_config(void)
 #ifdef IPCONFIG_DYNAMIC
  try_try_again:
 #endif
-	/* Give hardware a chance to settle */
-	msleep(CONF_PRE_OPEN);
+	/* Wait for devices to appear */
+	err = wait_for_devices();
+	if (err)
+		return err;
 
 	/* Setup all network devices */
-	if (ic_open_devs() < 0)
-		return -1;
+	err = ic_open_devs();
+	if (err)
+		return err;
 
 	/* Give drivers a chance to settle */
 	ssleep(CONF_POST_OPEN);
diff --git a/net/ipv4/proc.c b/net/ipv4/proc.c
index 242ed2307370..4f1f337f4337 100644
--- a/net/ipv4/proc.c
+++ b/net/ipv4/proc.c
@@ -249,6 +249,8 @@ static const struct snmp_mib snmp4_net_list[] = {
 	SNMP_MIB_ITEM("TCPSackShifted", LINUX_MIB_SACKSHIFTED),
 	SNMP_MIB_ITEM("TCPSackMerged", LINUX_MIB_SACKMERGED),
 	SNMP_MIB_ITEM("TCPSackShiftFallback", LINUX_MIB_SACKSHIFTFALLBACK),
+	SNMP_MIB_ITEM("TCPBacklogDrop", LINUX_MIB_TCPBACKLOGDROP),
+	SNMP_MIB_ITEM("TCPMinTTLDrop", LINUX_MIB_TCPMINTTLDROP),
 	SNMP_MIB_SENTINEL
 };
 
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index b2ba5581d2ae..a770df2493d2 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -146,7 +146,6 @@ static struct dst_entry *ipv4_negative_advice(struct dst_entry *dst);
 static void		 ipv4_link_failure(struct sk_buff *skb);
 static void		 ip_rt_update_pmtu(struct dst_entry *dst, u32 mtu);
 static int rt_garbage_collect(struct dst_ops *ops);
-static void rt_emergency_hash_rebuild(struct net *net);
 
 
 static struct dst_ops ipv4_dst_ops = {
@@ -780,11 +779,30 @@ static void rt_do_flush(int process_context)
 #define FRACT_BITS 3
 #define ONE (1UL << FRACT_BITS)
 
+/*
+ * Given a hash chain and an item in this hash chain,
+ * find if a previous entry has the same hash_inputs
+ * (but differs on tos, mark or oif)
+ * Returns 0 if an alias is found.
+ * Returns ONE if rth has no alias before itself.
+ */
+static int has_noalias(const struct rtable *head, const struct rtable *rth)
+{
+	const struct rtable *aux = head;
+
+	while (aux != rth) {
+		if (compare_hash_inputs(&aux->fl, &rth->fl))
+			return 0;
+		aux = aux->u.dst.rt_next;
+	}
+	return ONE;
+}
+
 static void rt_check_expire(void)
 {
 	static unsigned int rover;
 	unsigned int i = rover, goal;
-	struct rtable *rth, *aux, **rthp;
+	struct rtable *rth, **rthp;
 	unsigned long samples = 0;
 	unsigned long sum = 0, sum2 = 0;
 	unsigned long delta;
@@ -835,15 +853,7 @@ nofree:
 					 * attributes don't unfairly skew
 					 * the length computation
 					 */
-					for (aux = rt_hash_table[i].chain;;) {
-						if (aux == rth) {
-							length += ONE;
-							break;
-						}
-						if (compare_hash_inputs(&aux->fl, &rth->fl))
-							break;
-						aux = aux->u.dst.rt_next;
-					}
+					length += has_noalias(rt_hash_table[i].chain, rth);
 					continue;
 				}
 			} else if (!rt_may_expire(rth, tmo, ip_rt_gc_timeout))
@@ -922,10 +932,8 @@ static void rt_secret_rebuild_oneshot(struct net *net)
 {
 	del_timer_sync(&net->ipv4.rt_secret_timer);
 	rt_cache_invalidate(net);
-	if (ip_rt_secret_interval) {
-		net->ipv4.rt_secret_timer.expires += ip_rt_secret_interval;
-		add_timer(&net->ipv4.rt_secret_timer);
-	}
+	if (ip_rt_secret_interval)
+		mod_timer(&net->ipv4.rt_secret_timer, jiffies + ip_rt_secret_interval);
 }
 
 static void rt_emergency_hash_rebuild(struct net *net)
@@ -1073,6 +1081,21 @@ work_done:
 out:	return 0;
 }
 
+/*
+ * Returns number of entries in a hash chain that have different hash_inputs
+ */
+static int slow_chain_length(const struct rtable *head)
+{
+	int length = 0;
+	const struct rtable *rth = head;
+
+	while (rth) {
+		length += has_noalias(head, rth);
+		rth = rth->u.dst.rt_next;
+	}
+	return length >> FRACT_BITS;
+}
+
 static int rt_intern_hash(unsigned hash, struct rtable *rt,
 			  struct rtable **rp, struct sk_buff *skb)
 {
@@ -1185,7 +1208,8 @@ restart:
 			rt_free(cand);
 		}
 	} else {
-		if (chain_length > rt_chain_length_max) {
+		if (chain_length > rt_chain_length_max &&
+		    slow_chain_length(rt_hash_table[hash].chain) > rt_chain_length_max) {
 			struct net *net = dev_net(rt->u.dst.dev);
 			int num = ++net->ipv4.current_rt_cache_rebuild_count;
 			if (!rt_caching(dev_net(rt->u.dst.dev))) {
@@ -3077,22 +3101,20 @@ static void rt_secret_reschedule(int old)
 	rtnl_lock();
 	for_each_net(net) {
 		int deleted = del_timer_sync(&net->ipv4.rt_secret_timer);
+		long time;
 
 		if (!new)
 			continue;
 
 		if (deleted) {
-			long time = net->ipv4.rt_secret_timer.expires - jiffies;
+			time = net->ipv4.rt_secret_timer.expires - jiffies;
 
 			if (time <= 0 || (time += diff) <= 0)
 				time = 0;
-
-			net->ipv4.rt_secret_timer.expires = time;
 		} else
-			net->ipv4.rt_secret_timer.expires = new;
+			time = new;
 
-		net->ipv4.rt_secret_timer.expires += jiffies;
-		add_timer(&net->ipv4.rt_secret_timer);
+		mod_timer(&net->ipv4.rt_secret_timer, jiffies + time);
 	}
 	rtnl_unlock();
 }
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index c3588b4fd979..70df40980a87 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -1651,13 +1651,15 @@ int tcp_v4_rcv(struct sk_buff *skb)
 	if (!sk)
 		goto no_tcp_socket;
 
-	if (iph->ttl < inet_sk(sk)->min_ttl)
-		goto discard_and_relse;
-
 process:
 	if (sk->sk_state == TCP_TIME_WAIT)
 		goto do_time_wait;
 
+	if (unlikely(iph->ttl < inet_sk(sk)->min_ttl)) {
+		NET_INC_STATS_BH(net, LINUX_MIB_TCPMINTTLDROP);
+		goto discard_and_relse;
+	}
+
 	if (!xfrm4_policy_check(sk, XFRM_POLICY_IN, skb))
 		goto discard_and_relse;
 	nf_reset(skb);
@@ -1682,8 +1684,11 @@ process:
 			if (!tcp_prequeue(sk, skb))
 				ret = tcp_v4_do_rcv(sk, skb);
 		}
-	} else
-		sk_add_backlog(sk, skb);
+	} else if (unlikely(sk_add_backlog(sk, skb))) {
+		bh_unlock_sock(sk);
+		NET_INC_STATS_BH(net, LINUX_MIB_TCPBACKLOGDROP);
+		goto discard_and_relse;
+	}
 	bh_unlock_sock(sk);
 
 	sock_put(sk);
diff --git a/net/ipv4/tcp_minisocks.c b/net/ipv4/tcp_minisocks.c
index f206ee5dda80..4199bc6915c5 100644
--- a/net/ipv4/tcp_minisocks.c
+++ b/net/ipv4/tcp_minisocks.c
@@ -728,7 +728,7 @@ int tcp_child_process(struct sock *parent, struct sock *child,
 		 * in main socket hash table and lock on listening
 		 * socket does not protect us more.
 		 */
-		sk_add_backlog(child, skb);
+		__sk_add_backlog(child, skb);
 	}
 
 	bh_unlock_sock(child);
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index 4a1605d3f909..f181b78f2385 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -2395,13 +2395,17 @@ struct sk_buff *tcp_make_synack(struct sock *sk, struct dst_entry *dst,
 	struct tcp_extend_values *xvp = tcp_xv(rvp);
 	struct inet_request_sock *ireq = inet_rsk(req);
 	struct tcp_sock *tp = tcp_sk(sk);
+	const struct tcp_cookie_values *cvp = tp->cookie_values;
 	struct tcphdr *th;
 	struct sk_buff *skb;
 	struct tcp_md5sig_key *md5;
 	int tcp_header_size;
 	int mss;
+	int s_data_desired = 0;
 
-	skb = sock_wmalloc(sk, MAX_TCP_HEADER + 15, 1, GFP_ATOMIC);
+	if (cvp != NULL && cvp->s_data_constant && cvp->s_data_desired)
+		s_data_desired = cvp->s_data_desired;
+	skb = sock_wmalloc(sk, MAX_TCP_HEADER + 15 + s_data_desired, 1, GFP_ATOMIC);
 	if (skb == NULL)
 		return NULL;
 
@@ -2457,16 +2461,12 @@ struct sk_buff *tcp_make_synack(struct sock *sk, struct dst_entry *dst,
 			     TCPCB_FLAG_SYN | TCPCB_FLAG_ACK);
 
 	if (OPTION_COOKIE_EXTENSION & opts.options) {
-		const struct tcp_cookie_values *cvp = tp->cookie_values;
-
-		if (cvp != NULL &&
-		    cvp->s_data_constant &&
-		    cvp->s_data_desired > 0) {
-			u8 *buf = skb_put(skb, cvp->s_data_desired);
+		if (s_data_desired) {
+			u8 *buf = skb_put(skb, s_data_desired);
 
 			/* copy data directly from the listening socket. */
-			memcpy(buf, cvp->s_data_payload, cvp->s_data_desired);
-			TCP_SKB_CB(skb)->end_seq += cvp->s_data_desired;
+			memcpy(buf, cvp->s_data_payload, s_data_desired);
+			TCP_SKB_CB(skb)->end_seq += s_data_desired;
 		}
 
 		if (opts.hash_size > 0) {
diff --git a/net/ipv4/tcp_timer.c b/net/ipv4/tcp_timer.c
index a17629b8912e..b2e6bbccaee1 100644
--- a/net/ipv4/tcp_timer.c
+++ b/net/ipv4/tcp_timer.c
@@ -134,7 +134,7 @@ static void tcp_mtu_probing(struct inet_connection_sock *icsk, struct sock *sk)
 }
 
 /* This function calculates a "timeout" which is equivalent to the timeout of a
- * TCP connection after "boundary" unsucessful, exponentially backed-off
+ * TCP connection after "boundary" unsuccessful, exponentially backed-off
  * retransmissions with an initial RTO of TCP_RTO_MIN.
  */
 static bool retransmits_timed_out(struct sock *sk,
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index 608a5446d05b..7af756d0f931 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -1371,8 +1371,10 @@ int udp_queue_rcv_skb(struct sock *sk, struct sk_buff *skb)
 	bh_lock_sock(sk);
 	if (!sock_owned_by_user(sk))
 		rc = __udp_queue_rcv_skb(sk, skb);
-	else
-		sk_add_backlog(sk, skb);
+	else if (sk_add_backlog(sk, skb)) {
+		bh_unlock_sock(sk);
+		goto drop;
+	}
 	bh_unlock_sock(sk);
 
 	return rc;
diff --git a/net/ipv4/xfrm4_policy.c b/net/ipv4/xfrm4_policy.c
index 67107d63c1cd..e4a1483fba77 100644
--- a/net/ipv4/xfrm4_policy.c
+++ b/net/ipv4/xfrm4_policy.c
@@ -91,11 +91,12 @@ static int xfrm4_init_path(struct xfrm_dst *path, struct dst_entry *dst,
 	return 0;
 }
 
-static int xfrm4_fill_dst(struct xfrm_dst *xdst, struct net_device *dev)
+static int xfrm4_fill_dst(struct xfrm_dst *xdst, struct net_device *dev,
+			  struct flowi *fl)
 {
 	struct rtable *rt = (struct rtable *)xdst->route;
 
-	xdst->u.rt.fl = rt->fl;
+	xdst->u.rt.fl = *fl;
 
 	xdst->u.dst.dev = dev;
 	dev_hold(dev);
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 88fd8c5877ee..3381b4317c27 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -1380,6 +1380,8 @@ static void addrconf_dad_stop(struct inet6_ifaddr *ifp, int dad_failed)
 		if (dad_failed)
 			ifp->flags |= IFA_F_DADFAILED;
 		spin_unlock_bh(&ifp->lock);
+		if (dad_failed)
+			ipv6_ifa_notify(0, ifp);
 		in6_ifa_put(ifp);
 #ifdef CONFIG_IPV6_PRIVACY
 	} else if (ifp->flags&IFA_F_TEMPORARY) {
@@ -2615,7 +2617,7 @@ static void addrconf_bonding_change(struct net_device *dev, unsigned long event)
 static int addrconf_ifdown(struct net_device *dev, int how)
 {
 	struct inet6_dev *idev;
-	struct inet6_ifaddr *ifa, **bifa;
+	struct inet6_ifaddr *ifa, *keep_list, **bifa;
 	struct net *net = dev_net(dev);
 	int i;
 
@@ -2649,11 +2651,11 @@ static int addrconf_ifdown(struct net_device *dev, int how)
 		write_lock_bh(&addrconf_hash_lock);
 		while ((ifa = *bifa) != NULL) {
 			if (ifa->idev == idev &&
-			    (how || !(ifa->flags&IFA_F_PERMANENT))) {
+			    (how || !(ifa->flags&IFA_F_PERMANENT) ||
+			     ipv6_addr_type(&ifa->addr) & IPV6_ADDR_LINKLOCAL)) {
 				*bifa = ifa->lst_next;
 				ifa->lst_next = NULL;
-				addrconf_del_timer(ifa);
-				in6_ifa_put(ifa);
+				__in6_ifa_put(ifa);
 				continue;
 			}
 			bifa = &ifa->lst_next;
@@ -2689,31 +2691,51 @@ static int addrconf_ifdown(struct net_device *dev, int how)
 		write_lock_bh(&idev->lock);
 	}
 #endif
-	bifa = &idev->addr_list;
-	while ((ifa = *bifa) != NULL) {
-		if (how == 0 && (ifa->flags&IFA_F_PERMANENT)) {
-			/* Retain permanent address on admin down */
+	keep_list = NULL;
+	bifa = &keep_list;
+	while ((ifa = idev->addr_list) != NULL) {
+		idev->addr_list = ifa->if_next;
+		ifa->if_next = NULL;
+
+		addrconf_del_timer(ifa);
+
+		/* If just doing link down, and address is permanent
+		   and not link-local, then retain it. */
+		if (how == 0 &&
+		    (ifa->flags&IFA_F_PERMANENT) &&
+		    !(ipv6_addr_type(&ifa->addr) & IPV6_ADDR_LINKLOCAL)) {
+
+			/* Move to holding list */
+			*bifa = ifa;
 			bifa = &ifa->if_next;
 
-			/* Restart DAD if needed when link comes back up */
-			if ( !((dev->flags&(IFF_NOARP|IFF_LOOPBACK)) ||
-			       idev->cnf.accept_dad <= 0 ||
-			       (ifa->flags & IFA_F_NODAD)))
-				ifa->flags |= IFA_F_TENTATIVE;
-		} else {
-			*bifa = ifa->if_next;
-			ifa->if_next = NULL;
+			/* If not doing DAD on this address, just keep it. */
+			if ((dev->flags&(IFF_NOARP|IFF_LOOPBACK)) ||
+			    idev->cnf.accept_dad <= 0 ||
+			    (ifa->flags & IFA_F_NODAD))
+				continue;
 
+			/* If it was tentative already, no need to notify */
+			if (ifa->flags & IFA_F_TENTATIVE)
+				continue;
+
+			/* Flag it for later restoration when link comes up */
+			ifa->flags |= IFA_F_TENTATIVE;
+			in6_ifa_hold(ifa);
+		} else {
 			ifa->dead = 1;
-			write_unlock_bh(&idev->lock);
+		}
+		write_unlock_bh(&idev->lock);
 
-			__ipv6_ifa_notify(RTM_DELADDR, ifa);
-			atomic_notifier_call_chain(&inet6addr_chain, NETDEV_DOWN, ifa);
-			in6_ifa_put(ifa);
+		__ipv6_ifa_notify(RTM_DELADDR, ifa);
+		atomic_notifier_call_chain(&inet6addr_chain, NETDEV_DOWN, ifa);
+		in6_ifa_put(ifa);
 
-			write_lock_bh(&idev->lock);
-		}
+		write_lock_bh(&idev->lock);
 	}
+
+	idev->addr_list = keep_list;
+
 	write_unlock_bh(&idev->lock);
 
 	/* Step 5: Discard multicast list */
@@ -2739,28 +2761,29 @@ static int addrconf_ifdown(struct net_device *dev, int how)
 static void addrconf_rs_timer(unsigned long data)
 {
 	struct inet6_ifaddr *ifp = (struct inet6_ifaddr *) data;
+	struct inet6_dev *idev = ifp->idev;
 
-	if (ifp->idev->cnf.forwarding)
+	read_lock(&idev->lock);
+	if (idev->dead || !(idev->if_flags & IF_READY))
 		goto out;
 
-	if (ifp->idev->if_flags & IF_RA_RCVD) {
-		/*
-		 *	Announcement received after solicitation
-		 *	was sent
-		 */
+	if (idev->cnf.forwarding)
+		goto out;
+
+	/* Announcement received after solicitation was sent */
+	if (idev->if_flags & IF_RA_RCVD)
 		goto out;
-	}
 
 	spin_lock(&ifp->lock);
-	if (ifp->probes++ < ifp->idev->cnf.rtr_solicits) {
+	if (ifp->probes++ < idev->cnf.rtr_solicits) {
 		/* The wait after the last probe can be shorter */
 		addrconf_mod_timer(ifp, AC_RS,
-				   (ifp->probes == ifp->idev->cnf.rtr_solicits) ?
-				   ifp->idev->cnf.rtr_solicit_delay :
-				   ifp->idev->cnf.rtr_solicit_interval);
+				   (ifp->probes == idev->cnf.rtr_solicits) ?
+				   idev->cnf.rtr_solicit_delay :
+				   idev->cnf.rtr_solicit_interval);
 		spin_unlock(&ifp->lock);
 
-		ndisc_send_rs(ifp->idev->dev, &ifp->addr, &in6addr_linklocal_allrouters);
+		ndisc_send_rs(idev->dev, &ifp->addr, &in6addr_linklocal_allrouters);
 	} else {
 		spin_unlock(&ifp->lock);
 		/*
@@ -2768,10 +2791,11 @@ static void addrconf_rs_timer(unsigned long data)
 		 * assumption any longer.
 		 */
 		printk(KERN_DEBUG "%s: no IPv6 routers present\n",
-		       ifp->idev->dev->name);
+		       idev->dev->name);
 	}
 
 out:
+	read_unlock(&idev->lock);
 	in6_ifa_put(ifp);
 }
 
@@ -2850,9 +2874,9 @@ static void addrconf_dad_timer(unsigned long data)
 	struct inet6_dev *idev = ifp->idev;
 	struct in6_addr mcaddr;
 
-	read_lock_bh(&idev->lock);
-	if (idev->dead) {
-		read_unlock_bh(&idev->lock);
+	read_lock(&idev->lock);
+	if (idev->dead || !(idev->if_flags & IF_READY)) {
+		read_unlock(&idev->lock);
 		goto out;
 	}
 
@@ -2864,7 +2888,7 @@ static void addrconf_dad_timer(unsigned long data)
 
 		ifp->flags &= ~(IFA_F_TENTATIVE|IFA_F_OPTIMISTIC|IFA_F_DADFAILED);
 		spin_unlock(&ifp->lock);
-		read_unlock_bh(&idev->lock);
+		read_unlock(&idev->lock);
 
 		addrconf_dad_completed(ifp);
 
@@ -2874,7 +2898,7 @@ static void addrconf_dad_timer(unsigned long data)
 	ifp->probes--;
 	addrconf_mod_timer(ifp, AC_DAD, ifp->idev->nd_parms->retrans_time);
 	spin_unlock(&ifp->lock);
-	read_unlock_bh(&idev->lock);
+	read_unlock(&idev->lock);
 
 	/* send a neighbour solicitation for our addr */
 	addrconf_addr_solict_mult(&ifp->addr, &mcaddr);
diff --git a/net/ipv6/fib6_rules.c b/net/ipv6/fib6_rules.c
index 551882b9dfd6..5e463c43fcc2 100644
--- a/net/ipv6/fib6_rules.c
+++ b/net/ipv6/fib6_rules.c
@@ -84,18 +84,11 @@ static int fib6_rule_action(struct fib_rule *rule, struct flowi *flp,
 		if ((rule->flags & FIB_RULE_FIND_SADDR) &&
 		    r->src.plen && !(flags & RT6_LOOKUP_F_HAS_SADDR)) {
 			struct in6_addr saddr;
-			unsigned int srcprefs = 0;
-
-			if (flags & RT6_LOOKUP_F_SRCPREF_TMP)
-				srcprefs |= IPV6_PREFER_SRC_TMP;
-			if (flags & RT6_LOOKUP_F_SRCPREF_PUBLIC)
-				srcprefs |= IPV6_PREFER_SRC_PUBLIC;
-			if (flags & RT6_LOOKUP_F_SRCPREF_COA)
-				srcprefs |= IPV6_PREFER_SRC_COA;
 
 			if (ipv6_dev_get_saddr(net,
 					       ip6_dst_idev(&rt->u.dst)->dev,
-					       &flp->fl6_dst, srcprefs,
+					       &flp->fl6_dst,
+					       rt6_flags2srcprefs(flags),
 					       &saddr))
 				goto again;
 			if (!ipv6_prefix_equal(&saddr, &r->src.addr,
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index b08879e97f22..52cd3eff31dc 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -819,15 +819,8 @@ struct dst_entry * ip6_route_output(struct net *net, struct sock *sk,
 
 	if (!ipv6_addr_any(&fl->fl6_src))
 		flags |= RT6_LOOKUP_F_HAS_SADDR;
-	else if (sk) {
-		unsigned int prefs = inet6_sk(sk)->srcprefs;
-		if (prefs & IPV6_PREFER_SRC_TMP)
-			flags |= RT6_LOOKUP_F_SRCPREF_TMP;
-		if (prefs & IPV6_PREFER_SRC_PUBLIC)
-			flags |= RT6_LOOKUP_F_SRCPREF_PUBLIC;
-		if (prefs & IPV6_PREFER_SRC_COA)
-			flags |= RT6_LOOKUP_F_SRCPREF_COA;
-	}
+	else if (sk)
+		flags |= rt6_srcprefs2flags(inet6_sk(sk)->srcprefs);
 
 	return fib6_rule_lookup(net, fl, flags, ip6_pol_route_output);
 }
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index 6963a6b6763e..9b6dbba80d31 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -1740,8 +1740,11 @@ process:
 			if (!tcp_prequeue(sk, skb))
 				ret = tcp_v6_do_rcv(sk, skb);
 		}
-	} else
-		sk_add_backlog(sk, skb);
+	} else if (unlikely(sk_add_backlog(sk, skb))) {
+		bh_unlock_sock(sk);
+		NET_INC_STATS_BH(net, LINUX_MIB_TCPBACKLOGDROP);
+		goto discard_and_relse;
+	}
 	bh_unlock_sock(sk);
 
 	sock_put(sk);
diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c
index 52b8347ae3b2..3c0c9c755c92 100644
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -583,16 +583,20 @@ static void flush_stack(struct sock **stack, unsigned int count,
 			bh_lock_sock(sk);
 			if (!sock_owned_by_user(sk))
 				udpv6_queue_rcv_skb(sk, skb1);
-			else
-				sk_add_backlog(sk, skb1);
+			else if (sk_add_backlog(sk, skb1)) {
+				kfree_skb(skb1);
+				bh_unlock_sock(sk);
+				goto drop;
+			}
 			bh_unlock_sock(sk);
-		} else {
-			atomic_inc(&sk->sk_drops);
-			UDP6_INC_STATS_BH(sock_net(sk),
-					UDP_MIB_RCVBUFERRORS, IS_UDPLITE(sk));
-			UDP6_INC_STATS_BH(sock_net(sk),
-					UDP_MIB_INERRORS, IS_UDPLITE(sk));
+			continue;
 		}
+drop:
+		atomic_inc(&sk->sk_drops);
+		UDP6_INC_STATS_BH(sock_net(sk),
+				UDP_MIB_RCVBUFERRORS, IS_UDPLITE(sk));
+		UDP6_INC_STATS_BH(sock_net(sk),
+				UDP_MIB_INERRORS, IS_UDPLITE(sk));
 	}
 }
 /*
@@ -754,8 +758,12 @@ int __udp6_lib_rcv(struct sk_buff *skb, struct udp_table *udptable,
 	bh_lock_sock(sk);
 	if (!sock_owned_by_user(sk))
 		udpv6_queue_rcv_skb(sk, skb);
-	else
-		sk_add_backlog(sk, skb);
+	else if (sk_add_backlog(sk, skb)) {
+		atomic_inc(&sk->sk_drops);
+		bh_unlock_sock(sk);
+		sock_put(sk);
+		goto discard;
+	}
 	bh_unlock_sock(sk);
 	sock_put(sk);
 	return 0;
diff --git a/net/ipv6/xfrm6_policy.c b/net/ipv6/xfrm6_policy.c
index dbdc696f5fc5..ae181651c75a 100644
--- a/net/ipv6/xfrm6_policy.c
+++ b/net/ipv6/xfrm6_policy.c
@@ -116,7 +116,8 @@ static int xfrm6_init_path(struct xfrm_dst *path, struct dst_entry *dst,
 	return 0;
 }
 
-static int xfrm6_fill_dst(struct xfrm_dst *xdst, struct net_device *dev)
+static int xfrm6_fill_dst(struct xfrm_dst *xdst, struct net_device *dev,
+			  struct flowi *fl)
 {
 	struct rt6_info *rt = (struct rt6_info*)xdst->route;
 
diff --git a/net/llc/llc_c_ac.c b/net/llc/llc_c_ac.c
index 019c780512e8..86d6985b9d49 100644
--- a/net/llc/llc_c_ac.c
+++ b/net/llc/llc_c_ac.c
@@ -1437,7 +1437,7 @@ static void llc_process_tmr_ev(struct sock *sk, struct sk_buff *skb)
 			llc_conn_state_process(sk, skb);
 		else {
 			llc_set_backlog_type(skb, LLC_EVENT);
-			sk_add_backlog(sk, skb);
+			__sk_add_backlog(sk, skb);
 		}
 	}
 }
diff --git a/net/llc/llc_conn.c b/net/llc/llc_conn.c
index a8dde9b010da..a12144da7974 100644
--- a/net/llc/llc_conn.c
+++ b/net/llc/llc_conn.c
@@ -827,7 +827,8 @@ void llc_conn_handler(struct llc_sap *sap, struct sk_buff *skb)
 	else {
 		dprintk("%s: adding to backlog...\n", __func__);
 		llc_set_backlog_type(skb, LLC_PACKET);
-		sk_add_backlog(sk, skb);
+		if (sk_add_backlog(sk, skb))
+			goto drop_unlock;
 	}
 out:
 	bh_unlock_sock(sk);
diff --git a/net/mac80211/debugfs_netdev.c b/net/mac80211/debugfs_netdev.c
index 9affe2cd185f..b4ddb2f83914 100644
--- a/net/mac80211/debugfs_netdev.c
+++ b/net/mac80211/debugfs_netdev.c
@@ -48,20 +48,24 @@ static ssize_t ieee80211_if_write(
 	ssize_t (*write)(struct ieee80211_sub_if_data *, const char *, int))
 {
 	u8 *buf;
-	ssize_t ret = -ENODEV;
+	ssize_t ret;
 
-	buf = kzalloc(count, GFP_KERNEL);
+	buf = kmalloc(count, GFP_KERNEL);
 	if (!buf)
 		return -ENOMEM;
 
+	ret = -EFAULT;
 	if (copy_from_user(buf, userbuf, count))
-		return -EFAULT;
+		goto freebuf;
 
+	ret = -ENODEV;
 	rtnl_lock();
 	if (sdata->dev->reg_state == NETREG_REGISTERED)
 		ret = (*write)(sdata, buf, count);
 	rtnl_unlock();
 
+freebuf:
+	kfree(buf);
 	return ret;
 }
 
diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c
index bc4e20e57ff5..1a29c4a8139e 100644
--- a/net/mac80211/mesh_plink.c
+++ b/net/mac80211/mesh_plink.c
@@ -744,7 +744,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 		break;
 	default:
 		/* should not get here, PLINK_BLOCKED is dealt with at the
-		 * beggining of the function
+		 * beginning of the function
 		 */
 		spin_unlock_bh(&sta->lock);
 		break;
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 41812a15eea0..be5f723d643a 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -177,7 +177,8 @@ static u32 ieee80211_enable_ht(struct ieee80211_sub_if_data *sdata,
 		sta = sta_info_get(sdata, bssid);
 		if (sta)
 			rate_control_rate_update(local, sband, sta,
-						 IEEE80211_RC_HT_CHANGED);
+						 IEEE80211_RC_HT_CHANGED,
+						 local->oper_channel_type);
 		rcu_read_unlock();
         }
 
@@ -435,10 +436,12 @@ static void ieee80211_enable_ps(struct ieee80211_local *local,
 		if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK)
 			ieee80211_send_nullfunc(local, sdata, 1);
 
-		if (!(local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)) {
-			conf->flags |= IEEE80211_CONF_PS;
-			ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
-		}
+		if ((local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK) &&
+		    (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS))
+			return;
+
+		conf->flags |= IEEE80211_CONF_PS;
+		ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
 	}
 }
 
@@ -557,7 +560,8 @@ void ieee80211_dynamic_ps_enable_work(struct work_struct *work)
 	    (!(ifmgd->flags & IEEE80211_STA_NULLFUNC_ACKED)))
 		ieee80211_send_nullfunc(local, sdata, 1);
 
-	if (!(local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) ||
+	if (!((local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) &&
+	      (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK)) ||
 	    (ifmgd->flags & IEEE80211_STA_NULLFUNC_ACKED)) {
 		ifmgd->flags &= ~IEEE80211_STA_NULLFUNC_ACKED;
 		local->hw.conf.flags |= IEEE80211_CONF_PS;
@@ -1893,8 +1897,20 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata,
 
 	mutex_lock(&ifmgd->mtx);
 	if (ifmgd->associated) {
-		mutex_unlock(&ifmgd->mtx);
-		return -EALREADY;
+		if (!req->prev_bssid ||
+		    memcmp(req->prev_bssid, ifmgd->associated->bssid,
+			   ETH_ALEN)) {
+			/*
+			 * We are already associated and the request was not a
+			 * reassociation request from the current BSS, so
+			 * reject it.
+			 */
+			mutex_unlock(&ifmgd->mtx);
+			return -EALREADY;
+		}
+
+		/* Trying to reassociate - clear previous association state */
+		ieee80211_set_disassoc(sdata);
 	}
 	mutex_unlock(&ifmgd->mtx);
 
diff --git a/net/mac80211/rate.h b/net/mac80211/rate.h
index b6108bca96d4..065a96190e32 100644
--- a/net/mac80211/rate.h
+++ b/net/mac80211/rate.h
@@ -66,7 +66,8 @@ static inline void rate_control_rate_init(struct sta_info *sta)
 
 static inline void rate_control_rate_update(struct ieee80211_local *local,
 				    struct ieee80211_supported_band *sband,
-				    struct sta_info *sta, u32 changed)
+				    struct sta_info *sta, u32 changed,
+				    enum nl80211_channel_type oper_chan_type)
 {
 	struct rate_control_ref *ref = local->rate_ctrl;
 	struct ieee80211_sta *ista = &sta->sta;
@@ -74,7 +75,7 @@ static inline void rate_control_rate_update(struct ieee80211_local *local,
 
 	if (ref && ref->ops->rate_update)
 		ref->ops->rate_update(ref->priv, sband, ista,
-				      priv_sta, changed);
+				      priv_sta, changed, oper_chan_type);
 }
 
 static inline void *rate_control_alloc_sta(struct rate_control_ref *ref,
diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index 211c475f73c6..56422d894351 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -434,6 +434,7 @@ int sta_info_insert_rcu(struct sta_info *sta) __acquires(RCU)
 	/* check if STA exists already */
 	if (sta_info_get_bss(sdata, sta->sta.addr)) {
 		spin_unlock_irqrestore(&local->sta_lock, flags);
+		mutex_unlock(&local->sta_mtx);
 		rcu_read_lock();
 		err = -EEXIST;
 		goto out_free;
diff --git a/net/netfilter/nf_conntrack_sip.c b/net/netfilter/nf_conntrack_sip.c
index 8dd75d90efc0..c6cd1b84eddd 100644
--- a/net/netfilter/nf_conntrack_sip.c
+++ b/net/netfilter/nf_conntrack_sip.c
@@ -284,7 +284,7 @@ EXPORT_SYMBOL_GPL(ct_sip_parse_request);
  * tabs, spaces and continuation lines, which are treated as a single whitespace
  * character.
  *
- * Some headers may appear multiple times. A comma seperated list of values is
+ * Some headers may appear multiple times. A comma separated list of values is
  * equivalent to multiple headers.
  */
 static const struct sip_header ct_sip_hdrs[] = {
@@ -421,7 +421,7 @@ int ct_sip_get_header(const struct nf_conn *ct, const char *dptr,
 }
 EXPORT_SYMBOL_GPL(ct_sip_get_header);
 
-/* Get next header field in a list of comma seperated values */
+/* Get next header field in a list of comma separated values */
 static int ct_sip_next_header(const struct nf_conn *ct, const char *dptr,
 			      unsigned int dataoff, unsigned int datalen,
 			      enum sip_header_types type,
diff --git a/net/netfilter/xt_hashlimit.c b/net/netfilter/xt_hashlimit.c
index d952806b6469..9e9c48963942 100644
--- a/net/netfilter/xt_hashlimit.c
+++ b/net/netfilter/xt_hashlimit.c
@@ -1,6 +1,6 @@
 /*
  *	xt_hashlimit - Netfilter module to limit the number of packets per time
- *	seperately for each hashbucket (sourceip/sourceport/dstip/dstport)
+ *	separately for each hashbucket (sourceip/sourceport/dstip/dstport)
  *
  *	(C) 2003-2004 by Harald Welte <laforge@netfilter.org>
  *	Copyright © CC Computer Consultants GmbH, 2007 - 2008
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index 031a5e6fb4aa..1612d417d10c 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -1688,6 +1688,8 @@ static int packet_dev_mc(struct net_device *dev, struct packet_mclist *i,
 {
 	switch (i->type) {
 	case PACKET_MR_MULTICAST:
+		if (i->alen != dev->addr_len)
+			return -EINVAL;
 		if (what > 0)
 			return dev_mc_add(dev, i->addr, i->alen, 0);
 		else
@@ -1700,6 +1702,8 @@ static int packet_dev_mc(struct net_device *dev, struct packet_mclist *i,
 		return dev_set_allmulti(dev, what);
 		break;
 	case PACKET_MR_UNICAST:
+		if (i->alen != dev->addr_len)
+			return -EINVAL;
 		if (what > 0)
 			return dev_unicast_add(dev, i->addr);
 		else
@@ -1734,7 +1738,7 @@ static int packet_mc_add(struct sock *sk, struct packet_mreq_max *mreq)
 		goto done;
 
 	err = -EINVAL;
-	if (mreq->mr_alen != dev->addr_len)
+	if (mreq->mr_alen > dev->addr_len)
 		goto done;
 
 	err = -ENOBUFS;
diff --git a/net/phonet/pn_dev.c b/net/phonet/pn_dev.c
index c597cc53a6fb..5c6ae0c701c0 100644
--- a/net/phonet/pn_dev.c
+++ b/net/phonet/pn_dev.c
@@ -107,8 +107,7 @@ static void phonet_device_destroy(struct net_device *dev)
 	if (pnd) {
 		u8 addr;
 
-		for (addr = find_first_bit(pnd->addrs, 64); addr < 64;
-			addr = find_next_bit(pnd->addrs, 64, 1+addr))
+		for_each_set_bit(addr, pnd->addrs, 64)
 			phonet_address_notify(RTM_DELADDR, dev, addr);
 		kfree(pnd);
 	}
diff --git a/net/phonet/pn_netlink.c b/net/phonet/pn_netlink.c
index 2e6c7eb8e76a..fe2e7088ee07 100644
--- a/net/phonet/pn_netlink.c
+++ b/net/phonet/pn_netlink.c
@@ -141,8 +141,7 @@ static int getaddr_dumpit(struct sk_buff *skb, struct netlink_callback *cb)
 			continue;
 
 		addr_idx = 0;
-		for (addr = find_first_bit(pnd->addrs, 64); addr < 64;
-			addr = find_next_bit(pnd->addrs, 64, 1+addr)) {
+		for_each_set_bit(addr, pnd->addrs, 64) {
 			if (addr_idx++ < addr_start_idx)
 				continue;
 
diff --git a/net/rfkill/input.c b/net/rfkill/input.c
index a7295ad5f9cb..3713d7ecab96 100644
--- a/net/rfkill/input.c
+++ b/net/rfkill/input.c
@@ -212,6 +212,9 @@ static void rfkill_event(struct input_handle *handle, unsigned int type,
 		case KEY_WIMAX:
 			rfkill_schedule_toggle(RFKILL_TYPE_WIMAX);
 			break;
+		case KEY_RFKILL:
+			rfkill_schedule_toggle(RFKILL_TYPE_ALL);
+			break;
 		}
 	} else if (type == EV_SW && code == SW_RFKILL_ALL)
 		rfkill_schedule_evsw_rfkillall(data);
@@ -295,6 +298,11 @@ static const struct input_device_id rfkill_ids[] = {
 		.keybit = { [BIT_WORD(KEY_WIMAX)] = BIT_MASK(KEY_WIMAX) },
 	},
 	{
+		.flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT,
+		.evbit = { BIT_MASK(EV_KEY) },
+		.keybit = { [BIT_WORD(KEY_RFKILL)] = BIT_MASK(KEY_RFKILL) },
+	},
+	{
 		.flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_SWBIT,
 		.evbit = { BIT(EV_SW) },
 		.swbit = { [BIT_WORD(SW_RFKILL_ALL)] = BIT_MASK(SW_RFKILL_ALL) },
diff --git a/net/sctp/input.c b/net/sctp/input.c
index c0c973e67add..3d74b264ea22 100644
--- a/net/sctp/input.c
+++ b/net/sctp/input.c
@@ -75,7 +75,7 @@ static struct sctp_association *__sctp_lookup_association(
 					const union sctp_addr *peer,
 					struct sctp_transport **pt);
 
-static void sctp_add_backlog(struct sock *sk, struct sk_buff *skb);
+static int sctp_add_backlog(struct sock *sk, struct sk_buff *skb);
 
 
 /* Calculate the SCTP checksum of an SCTP packet.  */
@@ -265,8 +265,13 @@ int sctp_rcv(struct sk_buff *skb)
 	}
 
 	if (sock_owned_by_user(sk)) {
+		if (sctp_add_backlog(sk, skb)) {
+			sctp_bh_unlock_sock(sk);
+			sctp_chunk_free(chunk);
+			skb = NULL; /* sctp_chunk_free already freed the skb */
+			goto discard_release;
+		}
 		SCTP_INC_STATS_BH(SCTP_MIB_IN_PKT_BACKLOG);
-		sctp_add_backlog(sk, skb);
 	} else {
 		SCTP_INC_STATS_BH(SCTP_MIB_IN_PKT_SOFTIRQ);
 		sctp_inq_push(&chunk->rcvr->inqueue, chunk);
@@ -336,8 +341,10 @@ int sctp_backlog_rcv(struct sock *sk, struct sk_buff *skb)
 		sctp_bh_lock_sock(sk);
 
 		if (sock_owned_by_user(sk)) {
-			sk_add_backlog(sk, skb);
-			backloged = 1;
+			if (sk_add_backlog(sk, skb))
+				sctp_chunk_free(chunk);
+			else
+				backloged = 1;
 		} else
 			sctp_inq_push(inqueue, chunk);
 
@@ -362,22 +369,27 @@ done:
 	return 0;
 }
 
-static void sctp_add_backlog(struct sock *sk, struct sk_buff *skb)
+static int sctp_add_backlog(struct sock *sk, struct sk_buff *skb)
 {
 	struct sctp_chunk *chunk = SCTP_INPUT_CB(skb)->chunk;
 	struct sctp_ep_common *rcvr = chunk->rcvr;
+	int ret;
 
-	/* Hold the assoc/ep while hanging on the backlog queue.
-	 * This way, we know structures we need will not disappear from us
-	 */
-	if (SCTP_EP_TYPE_ASSOCIATION == rcvr->type)
-		sctp_association_hold(sctp_assoc(rcvr));
-	else if (SCTP_EP_TYPE_SOCKET == rcvr->type)
-		sctp_endpoint_hold(sctp_ep(rcvr));
-	else
-		BUG();
+	ret = sk_add_backlog(sk, skb);
+	if (!ret) {
+		/* Hold the assoc/ep while hanging on the backlog queue.
+		 * This way, we know structures we need will not disappear
+		 * from us
+		 */
+		if (SCTP_EP_TYPE_ASSOCIATION == rcvr->type)
+			sctp_association_hold(sctp_assoc(rcvr));
+		else if (SCTP_EP_TYPE_SOCKET == rcvr->type)
+			sctp_endpoint_hold(sctp_ep(rcvr));
+		else
+			BUG();
+	}
+	return ret;
 
-	sk_add_backlog(sk, skb);
 }
 
 /* Handle icmp frag needed error. */
diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c
index 4e4ca65cd320..500886bda9b4 100644
--- a/net/sctp/sm_sideeffect.c
+++ b/net/sctp/sm_sideeffect.c
@@ -475,7 +475,7 @@ static void sctp_do_8_2_transport_strike(struct sctp_association *asoc,
 	 * used to provide an upper bound to this doubling operation.
 	 *
 	 * Special Case:  the first HB doesn't trigger exponential backoff.
-	 * The first unacknowleged HB triggers it.  We do this with a flag
+	 * The first unacknowledged HB triggers it.  We do this with a flag
 	 * that indicates that we have an outstanding HB.
 	 */
 	if (!is_hb || transport->hb_sent) {
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index f6d1e59c4151..dfc5c127efd4 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -3720,6 +3720,9 @@ SCTP_STATIC int sctp_init_sock(struct sock *sk)
 	SCTP_DBG_OBJCNT_INC(sock);
 	percpu_counter_inc(&sctp_sockets_allocated);
 
+	/* Set socket backlog limit. */
+	sk->sk_backlog.limit = sysctl_sctp_rmem[1];
+
 	local_bh_disable();
 	sock_prot_inuse_add(sock_net(sk), sk->sk_prot, 1);
 	local_bh_enable();
diff --git a/net/sunrpc/xprtrdma/transport.c b/net/sunrpc/xprtrdma/transport.c
index 7018eef1dcdd..f96c2fe6137b 100644
--- a/net/sunrpc/xprtrdma/transport.c
+++ b/net/sunrpc/xprtrdma/transport.c
@@ -160,16 +160,15 @@ xprt_rdma_format_addresses(struct rpc_xprt *xprt)
 	(void)rpc_ntop(sap, buf, sizeof(buf));
 	xprt->address_strings[RPC_DISPLAY_ADDR] = kstrdup(buf, GFP_KERNEL);
 
-	(void)snprintf(buf, sizeof(buf), "%u", rpc_get_port(sap));
+	snprintf(buf, sizeof(buf), "%u", rpc_get_port(sap));
 	xprt->address_strings[RPC_DISPLAY_PORT] = kstrdup(buf, GFP_KERNEL);
 
 	xprt->address_strings[RPC_DISPLAY_PROTO] = "rdma";
 
-	(void)snprintf(buf, sizeof(buf), "%02x%02x%02x%02x",
-				NIPQUAD(sin->sin_addr.s_addr));
+	snprintf(buf, sizeof(buf), "%08x", ntohl(sin->sin_addr.s_addr));
 	xprt->address_strings[RPC_DISPLAY_HEX_ADDR] = kstrdup(buf, GFP_KERNEL);
 
-	(void)snprintf(buf, sizeof(buf), "%4hx", rpc_get_port(sap));
+	snprintf(buf, sizeof(buf), "%4hx", rpc_get_port(sap));
 	xprt->address_strings[RPC_DISPLAY_HEX_PORT] = kstrdup(buf, GFP_KERNEL);
 
 	/* netid */
diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c
index 712412982cee..e4839c07c913 100644
--- a/net/sunrpc/xprtsock.c
+++ b/net/sunrpc/xprtsock.c
@@ -297,12 +297,11 @@ static void xs_format_common_peer_addresses(struct rpc_xprt *xprt)
 	switch (sap->sa_family) {
 	case AF_INET:
 		sin = xs_addr_in(xprt);
-		(void)snprintf(buf, sizeof(buf), "%02x%02x%02x%02x",
-					NIPQUAD(sin->sin_addr.s_addr));
+		snprintf(buf, sizeof(buf), "%08x", ntohl(sin->sin_addr.s_addr));
 		break;
 	case AF_INET6:
 		sin6 = xs_addr_in6(xprt);
-		(void)snprintf(buf, sizeof(buf), "%pi6", &sin6->sin6_addr);
+		snprintf(buf, sizeof(buf), "%pi6", &sin6->sin6_addr);
 		break;
 	default:
 		BUG();
@@ -315,10 +314,10 @@ static void xs_format_common_peer_ports(struct rpc_xprt *xprt)
 	struct sockaddr *sap = xs_addr(xprt);
 	char buf[128];
 
-	(void)snprintf(buf, sizeof(buf), "%u", rpc_get_port(sap));
+	snprintf(buf, sizeof(buf), "%u", rpc_get_port(sap));
 	xprt->address_strings[RPC_DISPLAY_PORT] = kstrdup(buf, GFP_KERNEL);
 
-	(void)snprintf(buf, sizeof(buf), "%4hx", rpc_get_port(sap));
+	snprintf(buf, sizeof(buf), "%4hx", rpc_get_port(sap));
 	xprt->address_strings[RPC_DISPLAY_HEX_PORT] = kstrdup(buf, GFP_KERNEL);
 }
 
@@ -549,8 +548,6 @@ static int xs_udp_send_request(struct rpc_task *task)
 		/* Still some bytes left; set up for a retry later. */
 		status = -EAGAIN;
 	}
-	if (!transport->sock)
-		goto out;
 
 	switch (status) {
 	case -ENOTSOCK:
@@ -570,7 +567,7 @@ static int xs_udp_send_request(struct rpc_task *task)
 		 * prompts ECONNREFUSED. */
 		clear_bit(SOCK_ASYNC_NOSPACE, &transport->sock->flags);
 	}
-out:
+
 	return status;
 }
 
@@ -652,8 +649,6 @@ static int xs_tcp_send_request(struct rpc_task *task)
 		status = -EAGAIN;
 		break;
 	}
-	if (!transport->sock)
-		goto out;
 
 	switch (status) {
 	case -ENOTSOCK:
@@ -673,7 +668,7 @@ static int xs_tcp_send_request(struct rpc_task *task)
 	case -ENOTCONN:
 		clear_bit(SOCK_ASYNC_NOSPACE, &transport->sock->flags);
 	}
-out:
+
 	return status;
 }
 
diff --git a/net/tipc/bearer.c b/net/tipc/bearer.c
index 327011fcc407..78091375ca12 100644
--- a/net/tipc/bearer.c
+++ b/net/tipc/bearer.c
@@ -45,10 +45,10 @@
 
 #define MAX_ADDR_STR 32
 
-static struct media *media_list = NULL;
+static struct media media_list[MAX_MEDIA];
 static u32 media_count = 0;
 
-struct bearer *tipc_bearers = NULL;
+struct bearer tipc_bearers[MAX_BEARERS];
 
 /**
  * media_name_valid - validate media name
@@ -108,9 +108,11 @@ int  tipc_register_media(u32 media_type,
 	int res = -EINVAL;
 
 	write_lock_bh(&tipc_net_lock);
-	if (!media_list)
-		goto exit;
 
+	if (tipc_mode != TIPC_NET_MODE) {
+		warn("Media <%s> rejected, not in networked mode yet\n", name);
+		goto exit;
+	}
 	if (!media_name_valid(name)) {
 		warn("Media <%s> rejected, illegal name\n", name);
 		goto exit;
@@ -660,33 +662,10 @@ int tipc_disable_bearer(const char *name)
 
 
 
-int tipc_bearer_init(void)
-{
-	int res;
-
-	write_lock_bh(&tipc_net_lock);
-	tipc_bearers = kcalloc(MAX_BEARERS, sizeof(struct bearer), GFP_ATOMIC);
-	media_list = kcalloc(MAX_MEDIA, sizeof(struct media), GFP_ATOMIC);
-	if (tipc_bearers && media_list) {
-		res = 0;
-	} else {
-		kfree(tipc_bearers);
-		kfree(media_list);
-		tipc_bearers = NULL;
-		media_list = NULL;
-		res = -ENOMEM;
-	}
-	write_unlock_bh(&tipc_net_lock);
-	return res;
-}
-
 void tipc_bearer_stop(void)
 {
 	u32 i;
 
-	if (!tipc_bearers)
-		return;
-
 	for (i = 0; i < MAX_BEARERS; i++) {
 		if (tipc_bearers[i].active)
 			tipc_bearers[i].publ.blocked = 1;
@@ -695,10 +674,6 @@ void tipc_bearer_stop(void)
 		if (tipc_bearers[i].active)
 			bearer_disable(tipc_bearers[i].publ.name);
 	}
-	kfree(tipc_bearers);
-	kfree(media_list);
-	tipc_bearers = NULL;
-	media_list = NULL;
 	media_count = 0;
 }
 
diff --git a/net/tipc/bearer.h b/net/tipc/bearer.h
index ca5734892713..000228e93f9e 100644
--- a/net/tipc/bearer.h
+++ b/net/tipc/bearer.h
@@ -114,7 +114,7 @@ struct bearer_name {
 
 struct link;
 
-extern struct bearer *tipc_bearers;
+extern struct bearer tipc_bearers[];
 
 void tipc_media_addr_printf(struct print_buf *pb, struct tipc_media_addr *a);
 struct sk_buff *tipc_media_get_names(void);
diff --git a/net/tipc/link.c b/net/tipc/link.c
index 6f50f6423f63..1a7e4665af80 100644
--- a/net/tipc/link.c
+++ b/net/tipc/link.c
@@ -1882,6 +1882,15 @@ void tipc_recv_msg(struct sk_buff *head, struct tipc_bearer *tb_ptr)
 			     (msg_destnode(msg) != tipc_own_addr)))
 			goto cont;
 
+		/* Discard non-routeable messages destined for another node */
+
+		if (unlikely(!msg_isdata(msg) &&
+			     (msg_destnode(msg) != tipc_own_addr))) {
+			if ((msg_user(msg) != CONN_MANAGER) &&
+			    (msg_user(msg) != MSG_FRAGMENTER))
+				goto cont;
+		}
+
 		/* Locate unicast link endpoint that should handle message */
 
 		n_ptr = tipc_node_find(msg_prevnode(msg));
diff --git a/net/tipc/net.c b/net/tipc/net.c
index 7906608bf510..f25b1cdb64eb 100644
--- a/net/tipc/net.c
+++ b/net/tipc/net.c
@@ -116,7 +116,8 @@
 */
 
 DEFINE_RWLOCK(tipc_net_lock);
-struct network tipc_net = { NULL };
+struct _zone *tipc_zones[256] = { NULL, };
+struct network tipc_net = { tipc_zones };
 
 struct tipc_node *tipc_net_select_remote_node(u32 addr, u32 ref)
 {
@@ -158,28 +159,12 @@ void tipc_net_send_external_routes(u32 dest)
 	}
 }
 
-static int net_init(void)
-{
-	memset(&tipc_net, 0, sizeof(tipc_net));
-	tipc_net.zones = kcalloc(tipc_max_zones + 1, sizeof(struct _zone *), GFP_ATOMIC);
-	if (!tipc_net.zones) {
-		return -ENOMEM;
-	}
-	return 0;
-}
-
 static void net_stop(void)
 {
 	u32 z_num;
 
-	if (!tipc_net.zones)
-		return;
-
-	for (z_num = 1; z_num <= tipc_max_zones; z_num++) {
+	for (z_num = 1; z_num <= tipc_max_zones; z_num++)
 		tipc_zone_delete(tipc_net.zones[z_num]);
-	}
-	kfree(tipc_net.zones);
-	tipc_net.zones = NULL;
 }
 
 static void net_route_named_msg(struct sk_buff *buf)
@@ -282,9 +267,7 @@ int tipc_net_start(u32 addr)
 	tipc_named_reinit();
 	tipc_port_reinit();
 
-	if ((res = tipc_bearer_init()) ||
-	    (res = net_init()) ||
-	    (res = tipc_cltr_init()) ||
+	if ((res = tipc_cltr_init()) ||
 	    (res = tipc_bclink_init())) {
 		return res;
 	}
diff --git a/net/tipc/ref.c b/net/tipc/ref.c
index 414fc34b8bea..8dea66500cf5 100644
--- a/net/tipc/ref.c
+++ b/net/tipc/ref.c
@@ -153,11 +153,11 @@ void tipc_ref_table_stop(void)
 
 u32 tipc_ref_acquire(void *object, spinlock_t **lock)
 {
-	struct reference *entry;
 	u32 index;
 	u32 index_mask;
 	u32 next_plus_upper;
 	u32 ref;
+	struct reference *entry = NULL;
 
 	if (!object) {
 		err("Attempt to acquire reference to non-existent object\n");
@@ -175,30 +175,36 @@ u32 tipc_ref_acquire(void *object, spinlock_t **lock)
 		index = tipc_ref_table.first_free;
 		entry = &(tipc_ref_table.entries[index]);
 		index_mask = tipc_ref_table.index_mask;
-		/* take lock in case a previous user of entry still holds it */
-		spin_lock_bh(&entry->lock);
 		next_plus_upper = entry->ref;
 		tipc_ref_table.first_free = next_plus_upper & index_mask;
 		ref = (next_plus_upper & ~index_mask) + index;
-		entry->ref = ref;
-		entry->object = object;
-		*lock = &entry->lock;
 	}
 	else if (tipc_ref_table.init_point < tipc_ref_table.capacity) {
 		index = tipc_ref_table.init_point++;
 		entry = &(tipc_ref_table.entries[index]);
 		spin_lock_init(&entry->lock);
-		spin_lock_bh(&entry->lock);
 		ref = tipc_ref_table.start_mask + index;
-		entry->ref = ref;
-		entry->object = object;
-		*lock = &entry->lock;
 	}
 	else {
 		ref = 0;
 	}
 	write_unlock_bh(&ref_table_lock);
 
+	/*
+	 * Grab the lock so no one else can modify this entry
+	 * While we assign its ref value & object pointer
+	 */
+	if (entry) {
+		spin_lock_bh(&entry->lock);
+		entry->ref = ref;
+		entry->object = object;
+		*lock = &entry->lock;
+		/*
+		 * keep it locked, the caller is responsible
+		 * for unlocking this when they're done with it
+		 */
+	}
+
 	return ref;
 }
 
diff --git a/net/tipc/socket.c b/net/tipc/socket.c
index 1ea64f09cc45..4b235fc1c70f 100644
--- a/net/tipc/socket.c
+++ b/net/tipc/socket.c
@@ -1322,8 +1322,10 @@ static u32 dispatch(struct tipc_port *tport, struct sk_buff *buf)
 	if (!sock_owned_by_user(sk)) {
 		res = filter_rcv(sk, buf);
 	} else {
-		sk_add_backlog(sk, buf);
-		res = TIPC_OK;
+		if (sk_add_backlog(sk, buf))
+			res = TIPC_ERR_OVERLOAD;
+		else
+			res = TIPC_OK;
 	}
 	bh_unlock_sock(sk);
 
diff --git a/net/tipc/subscr.c b/net/tipc/subscr.c
index ac91f0dfa144..ff123e56114a 100644
--- a/net/tipc/subscr.c
+++ b/net/tipc/subscr.c
@@ -76,19 +76,6 @@ struct top_srv {
 static struct top_srv topsrv = { 0 };
 
 /**
- * htohl - convert value to endianness used by destination
- * @in: value to convert
- * @swap: non-zero if endianness must be reversed
- *
- * Returns converted value
- */
-
-static u32 htohl(u32 in, int swap)
-{
-	return swap ? swab32(in) : in;
-}
-
-/**
  * subscr_send_event - send a message containing a tipc_event to the subscriber
  *
  * Note: Must not hold subscriber's server port lock, since tipc_send() will
@@ -107,11 +94,11 @@ static void subscr_send_event(struct subscription *sub,
 	msg_sect.iov_base = (void *)&sub->evt;
 	msg_sect.iov_len = sizeof(struct tipc_event);
 
-	sub->evt.event = htohl(event, sub->swap);
-	sub->evt.found_lower = htohl(found_lower, sub->swap);
-	sub->evt.found_upper = htohl(found_upper, sub->swap);
-	sub->evt.port.ref = htohl(port_ref, sub->swap);
-	sub->evt.port.node = htohl(node, sub->swap);
+	sub->evt.event = htonl(event);
+	sub->evt.found_lower = htonl(found_lower);
+	sub->evt.found_upper = htonl(found_upper);
+	sub->evt.port.ref = htonl(port_ref);
+	sub->evt.port.node = htonl(node);
 	tipc_send(sub->server_ref, 1, &msg_sect);
 }
 
@@ -287,16 +274,23 @@ static void subscr_cancel(struct tipc_subscr *s,
 {
 	struct subscription *sub;
 	struct subscription *sub_temp;
+	__u32 type, lower, upper;
 	int found = 0;
 
 	/* Find first matching subscription, exit if not found */
 
+	type = ntohl(s->seq.type);
+	lower = ntohl(s->seq.lower);
+	upper = ntohl(s->seq.upper);
+
 	list_for_each_entry_safe(sub, sub_temp, &subscriber->subscription_list,
 				 subscription_list) {
-		if (!memcmp(s, &sub->evt.s, sizeof(struct tipc_subscr))) {
-			found = 1;
-			break;
-		}
+			if ((type == sub->seq.type) &&
+			    (lower == sub->seq.lower) &&
+			    (upper == sub->seq.upper)) {
+				found = 1;
+				break;
+			}
 	}
 	if (!found)
 		return;
@@ -325,16 +319,10 @@ static struct subscription *subscr_subscribe(struct tipc_subscr *s,
 					     struct subscriber *subscriber)
 {
 	struct subscription *sub;
-	int swap;
-
-	/* Determine subscriber's endianness */
-
-	swap = !(s->filter & (TIPC_SUB_PORTS | TIPC_SUB_SERVICE));
 
 	/* Detect & process a subscription cancellation request */
 
-	if (s->filter & htohl(TIPC_SUB_CANCEL, swap)) {
-		s->filter &= ~htohl(TIPC_SUB_CANCEL, swap);
+	if (ntohl(s->filter) & TIPC_SUB_CANCEL) {
 		subscr_cancel(s, subscriber);
 		return NULL;
 	}
@@ -359,11 +347,11 @@ static struct subscription *subscr_subscribe(struct tipc_subscr *s,
 
 	/* Initialize subscription object */
 
-	sub->seq.type = htohl(s->seq.type, swap);
-	sub->seq.lower = htohl(s->seq.lower, swap);
-	sub->seq.upper = htohl(s->seq.upper, swap);
-	sub->timeout = htohl(s->timeout, swap);
-	sub->filter = htohl(s->filter, swap);
+	sub->seq.type = ntohl(s->seq.type);
+	sub->seq.lower = ntohl(s->seq.lower);
+	sub->seq.upper = ntohl(s->seq.upper);
+	sub->timeout = ntohl(s->timeout);
+	sub->filter = ntohl(s->filter);
 	if ((!(sub->filter & TIPC_SUB_PORTS) ==
 	     !(sub->filter & TIPC_SUB_SERVICE)) ||
 	    (sub->seq.lower > sub->seq.upper)) {
@@ -376,7 +364,6 @@ static struct subscription *subscr_subscribe(struct tipc_subscr *s,
 	INIT_LIST_HEAD(&sub->nameseq_list);
 	list_add(&sub->subscription_list, &subscriber->subscription_list);
 	sub->server_ref = subscriber->port_ref;
-	sub->swap = swap;
 	memcpy(&sub->evt.s, s, sizeof(struct tipc_subscr));
 	atomic_inc(&topsrv.subscription_count);
 	if (sub->timeout != TIPC_WAIT_FOREVER) {
diff --git a/net/tipc/subscr.h b/net/tipc/subscr.h
index 45d89bf4d202..c20f496d95b2 100644
--- a/net/tipc/subscr.h
+++ b/net/tipc/subscr.h
@@ -53,7 +53,6 @@ typedef void (*tipc_subscr_event) (struct subscription *sub,
  * @nameseq_list: adjacent subscriptions in name sequence's subscription list
  * @subscription_list: adjacent subscriptions in subscriber's subscription list
  * @server_ref: object reference of server port associated with subscription
- * @swap: indicates if subscriber uses opposite endianness in its messages
  * @evt: template for events generated by subscription
  */
 
@@ -66,7 +65,6 @@ struct subscription {
 	struct list_head nameseq_list;
 	struct list_head subscription_list;
 	u32 server_ref;
-	int swap;
 	struct tipc_event evt;
 };
 
diff --git a/net/x25/x25_dev.c b/net/x25/x25_dev.c
index 3e1efe534645..52e304212241 100644
--- a/net/x25/x25_dev.c
+++ b/net/x25/x25_dev.c
@@ -53,7 +53,7 @@ static int x25_receive_data(struct sk_buff *skb, struct x25_neigh *nb)
 		if (!sock_owned_by_user(sk)) {
 			queued = x25_process_rx_frame(sk, skb);
 		} else {
-			sk_add_backlog(sk, skb);
+			queued = !sk_add_backlog(sk, skb);
 		}
 		bh_unlock_sock(sk);
 		sock_put(sk);
diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c
index 34a5ef8316e7..843e066649cb 100644
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -1372,7 +1372,8 @@ static inline int xfrm_init_path(struct xfrm_dst *path, struct dst_entry *dst,
 	return err;
 }
 
-static inline int xfrm_fill_dst(struct xfrm_dst *xdst, struct net_device *dev)
+static inline int xfrm_fill_dst(struct xfrm_dst *xdst, struct net_device *dev,
+				struct flowi *fl)
 {
 	struct xfrm_policy_afinfo *afinfo =
 		xfrm_policy_get_afinfo(xdst->u.dst.ops->family);
@@ -1381,7 +1382,7 @@ static inline int xfrm_fill_dst(struct xfrm_dst *xdst, struct net_device *dev)
 	if (!afinfo)
 		return -EINVAL;
 
-	err = afinfo->fill_dst(xdst, dev);
+	err = afinfo->fill_dst(xdst, dev, fl);
 
 	xfrm_policy_put_afinfo(afinfo);
 
@@ -1486,7 +1487,7 @@ static struct dst_entry *xfrm_bundle_create(struct xfrm_policy *policy,
 	for (dst_prev = dst0; dst_prev != dst; dst_prev = dst_prev->child) {
 		struct xfrm_dst *xdst = (struct xfrm_dst *)dst_prev;
 
-		err = xfrm_fill_dst(xdst, dev);
+		err = xfrm_fill_dst(xdst, dev, fl);
 		if (err)
 			goto free_dst;
 
diff --git a/samples/hw_breakpoint/data_breakpoint.c b/samples/hw_breakpoint/data_breakpoint.c
index c69cbe9b2426..bd0f337afcab 100644
--- a/samples/hw_breakpoint/data_breakpoint.c
+++ b/samples/hw_breakpoint/data_breakpoint.c
@@ -34,7 +34,7 @@
 #include <linux/perf_event.h>
 #include <linux/hw_breakpoint.h>
 
-struct perf_event **sample_hbp;
+struct perf_event * __percpu *sample_hbp;
 
 static char ksym_name[KSYM_NAME_LEN] = "pid_max";
 module_param_string(ksym, ksym_name, KSYM_NAME_LEN, S_IRUGO);
@@ -61,8 +61,8 @@ static int __init hw_break_module_init(void)
 	attr.bp_type = HW_BREAKPOINT_W | HW_BREAKPOINT_R;
 
 	sample_hbp = register_wide_hw_breakpoint(&attr, sample_hbp_handler);
-	if (IS_ERR(sample_hbp)) {
-		ret = PTR_ERR(sample_hbp);
+	if (IS_ERR((void __force *)sample_hbp)) {
+		ret = PTR_ERR((void __force *)sample_hbp);
 		goto fail;
 	}
 
diff --git a/samples/kobject/kobject-example.c b/samples/kobject/kobject-example.c
index 8d9b55a12023..86ea0c3ad975 100644
--- a/samples/kobject/kobject-example.c
+++ b/samples/kobject/kobject-example.c
@@ -44,7 +44,7 @@ static struct kobj_attribute foo_attribute =
 	__ATTR(foo, 0666, foo_show, foo_store);
 
 /*
- * More complex function where we determine which varible is being accessed by
+ * More complex function where we determine which variable is being accessed by
  * looking at the attribute for the "baz" and "bar" files.
  */
 static ssize_t b_show(struct kobject *kobj, struct kobj_attribute *attr,
@@ -79,7 +79,7 @@ static struct kobj_attribute bar_attribute =
 
 
 /*
- * Create a group of attributes so that we can create and destory them all
+ * Create a group of attributes so that we can create and destroy them all
  * at once.
  */
 static struct attribute *attrs[] = {
diff --git a/samples/kobject/kset-example.c b/samples/kobject/kset-example.c
index 45b7d56fb541..3b126d1f8599 100644
--- a/samples/kobject/kset-example.c
+++ b/samples/kobject/kset-example.c
@@ -87,7 +87,7 @@ static ssize_t foo_attr_store(struct kobject *kobj,
 }
 
 /* Our custom sysfs_ops that we will associate with our ktype later on */
-static struct sysfs_ops foo_sysfs_ops = {
+static const struct sysfs_ops foo_sysfs_ops = {
 	.show = foo_attr_show,
 	.store = foo_attr_store,
 };
@@ -127,7 +127,7 @@ static struct foo_attribute foo_attribute =
 	__ATTR(foo, 0666, foo_show, foo_store);
 
 /*
- * More complex function where we determine which varible is being accessed by
+ * More complex function where we determine which variable is being accessed by
  * looking at the attribute for the "baz" and "bar" files.
  */
 static ssize_t b_show(struct foo_obj *foo_obj, struct foo_attribute *attr,
@@ -161,7 +161,7 @@ static struct foo_attribute bar_attribute =
 	__ATTR(bar, 0666, b_show, b_store);
 
 /*
- * Create a group of attributes so that we can create and destory them all
+ * Create a group of attributes so that we can create and destroy them all
  * at once.
  */
 static struct attribute *foo_default_attrs[] = {
diff --git a/scripts/gfp-translate b/scripts/gfp-translate
index 073cb6d152a0..d81b968d864e 100644
--- a/scripts/gfp-translate
+++ b/scripts/gfp-translate
@@ -19,7 +19,7 @@ usage() {
 	exit 0
 }
 
-# Parse command-line arguements
+# Parse command-line arguments
 while [ $# -gt 0 ]; do
 	case $1 in
 		--source)
diff --git a/scripts/kernel-doc b/scripts/kernel-doc
index 208ad3b0ca51..c7865c362d28 100755
--- a/scripts/kernel-doc
+++ b/scripts/kernel-doc
@@ -2103,7 +2103,7 @@ sub process_file($) {
 		$section = $newsection;
 	    } elsif (/$doc_end/) {
 
-		if ($contents ne "") {
+		if (($contents ne "") && ($contents ne "\n")) {
 		    dump_section($file, $section, xml_escape($contents));
 		    $section = $section_default;
 		    $contents = "";
diff --git a/security/selinux/avc.c b/security/selinux/avc.c
index db0fd9f33499..989fef82563a 100644
--- a/security/selinux/avc.c
+++ b/security/selinux/avc.c
@@ -337,7 +337,7 @@ static inline struct avc_node *avc_search_node(u32 ssid, u32 tsid, u16 tclass)
  * Look up an AVC entry that is valid for the
  * (@ssid, @tsid), interpreting the permissions
  * based on @tclass.  If a valid AVC entry exists,
- * then this function return the avc_node.
+ * then this function returns the avc_node.
  * Otherwise, this function returns NULL.
  */
 static struct avc_node *avc_lookup(u32 ssid, u32 tsid, u16 tclass)
@@ -523,7 +523,7 @@ void avc_audit(u32 ssid, u32 tsid,
  * @perms: permissions
  *
  * Register a callback function for events in the set @events
- * related to the SID pair (@ssid, @tsid) and
+ * related to the SID pair (@ssid, @tsid) 
  * and the permissions @perms, interpreting
  * @perms based on @tclass.  Returns %0 on success or
  * -%ENOMEM if insufficient memory exists to add the callback.
@@ -568,7 +568,7 @@ static inline int avc_sidcmp(u32 x, u32 y)
  *
  * if a valid AVC entry doesn't exist,this function returns -ENOENT.
  * if kmalloc() called internal returns NULL, this function returns -ENOMEM.
- * otherwise, this function update the AVC entry. The original AVC-entry object
+ * otherwise, this function updates the AVC entry. The original AVC-entry object
  * will release later by RCU.
  */
 static int avc_update_node(u32 event, u32 perms, u32 ssid, u32 tsid, u16 tclass,
diff --git a/security/tomoyo/common.c b/security/tomoyo/common.c
index ff51f1026b57..ef89947a774b 100644
--- a/security/tomoyo/common.c
+++ b/security/tomoyo/common.c
@@ -886,6 +886,7 @@ static struct tomoyo_profile *tomoyo_find_or_assign_new_profile(const unsigned
 	ptr = kmalloc(sizeof(*ptr), GFP_KERNEL);
 	if (!tomoyo_memory_ok(ptr)) {
 		kfree(ptr);
+		ptr = NULL;
 		goto ok;
 	}
 	for (i = 0; i < TOMOYO_MAX_CONTROL_INDEX; i++)
diff --git a/sound/arm/pxa2xx-ac97-lib.c b/sound/arm/pxa2xx-ac97-lib.c
index 6fdca97186e7..88eec3847df2 100644
--- a/sound/arm/pxa2xx-ac97-lib.c
+++ b/sound/arm/pxa2xx-ac97-lib.c
@@ -22,7 +22,6 @@
 
 #include <asm/irq.h>
 #include <mach/regs-ac97.h>
-#include <mach/pxa2xx-gpio.h>
 #include <mach/audio.h>
 
 static DEFINE_MUTEX(car_mutex);
@@ -32,6 +31,8 @@ static struct clk *ac97_clk;
 static struct clk *ac97conf_clk;
 static int reset_gpio;
 
+extern void pxa27x_assert_ac97reset(int reset_gpio, int on);
+
 /*
  * Beware PXA27x bugs:
  *
@@ -42,45 +43,6 @@ static int reset_gpio;
  * 1 jiffy timeout if interrupt never comes).
  */
 
-enum {
-	RESETGPIO_FORCE_HIGH,
-	RESETGPIO_FORCE_LOW,
-	RESETGPIO_NORMAL_ALTFUNC
-};
-
-/**
- * set_resetgpio_mode - computes and sets the AC97_RESET gpio mode on PXA
- * @mode: chosen action
- *
- * As the PXA27x CPUs suffer from a AC97 bug, a manual control of the reset line
- * must be done to insure proper work of AC97 reset line.  This function
- * computes the correct gpio_mode for further use by reset functions, and
- * applied the change through pxa_gpio_mode.
- */
-static void set_resetgpio_mode(int resetgpio_action)
-{
-	int mode = 0;
-
-	if (reset_gpio)
-		switch (resetgpio_action) {
-		case RESETGPIO_NORMAL_ALTFUNC:
-			if (reset_gpio == 113)
-				mode = 113 | GPIO_ALT_FN_2_OUT;
-			if (reset_gpio == 95)
-				mode = 95 | GPIO_ALT_FN_1_OUT;
-			break;
-		case RESETGPIO_FORCE_LOW:
-			mode = reset_gpio | GPIO_OUT | GPIO_DFLT_LOW;
-			break;
-		case RESETGPIO_FORCE_HIGH:
-			mode = reset_gpio | GPIO_OUT | GPIO_DFLT_HIGH;
-			break;
-		};
-
-	if (mode)
-		pxa_gpio_mode(mode);
-}
-
 unsigned short pxa2xx_ac97_read(struct snd_ac97 *ac97, unsigned short reg)
 {
 	unsigned short val = -1;
@@ -174,12 +136,11 @@ static inline void pxa_ac97_warm_pxa27x(void)
 {
 	gsr_bits = 0;
 
-	/* warm reset broken on Bulverde,
-	   so manually keep AC97 reset high */
-	set_resetgpio_mode(RESETGPIO_FORCE_HIGH);
+	/* warm reset broken on Bulverde, so manually keep AC97 reset high */
+	pxa27x_assert_ac97reset(reset_gpio, 1);
 	udelay(10);
 	GCR |= GCR_WARM_RST;
-	set_resetgpio_mode(RESETGPIO_NORMAL_ALTFUNC);
+	pxa27x_assert_ac97reset(reset_gpio, 0);
 	udelay(500);
 }
 
@@ -345,16 +306,6 @@ EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_suspend);
 
 int pxa2xx_ac97_hw_resume(void)
 {
-	if (cpu_is_pxa25x() || cpu_is_pxa27x()) {
-		pxa_gpio_mode(GPIO31_SYNC_AC97_MD);
-		pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD);
-		pxa_gpio_mode(GPIO28_BITCLK_AC97_MD);
-		pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD);
-	}
-	if (cpu_is_pxa27x()) {
-		/* Use GPIO 113 or 95 as AC97 Reset on Bulverde */
-		set_resetgpio_mode(RESETGPIO_NORMAL_ALTFUNC);
-	}
 	clk_enable(ac97_clk);
 	return 0;
 }
@@ -386,16 +337,9 @@ int __devinit pxa2xx_ac97_hw_probe(struct platform_device *dev)
 			reset_gpio = 113;
 	}
 
-	if (cpu_is_pxa25x() || cpu_is_pxa27x()) {
-		pxa_gpio_mode(GPIO31_SYNC_AC97_MD);
-		pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD);
-		pxa_gpio_mode(GPIO28_BITCLK_AC97_MD);
-		pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD);
-	}
-
 	if (cpu_is_pxa27x()) {
 		/* Use GPIO 113 as AC97 Reset on Bulverde */
-		set_resetgpio_mode(RESETGPIO_NORMAL_ALTFUNC);
+		pxa27x_assert_ac97reset(reset_gpio, 0);
 		ac97conf_clk = clk_get(&dev->dev, "AC97CONFCLK");
 		if (IS_ERR(ac97conf_clk)) {
 			ret = PTR_ERR(ac97conf_clk);
diff --git a/sound/core/timer.c b/sound/core/timer.c
index 8f8b17ac074d..73943651caed 100644
--- a/sound/core/timer.c
+++ b/sound/core/timer.c
@@ -393,7 +393,7 @@ static void snd_timer_notify1(struct snd_timer_instance *ti, int event)
 	    event == SNDRV_TIMER_EVENT_CONTINUE)
 		resolution = snd_timer_resolution(ti);
 	if (ti->ccallback)
-		ti->ccallback(ti, SNDRV_TIMER_EVENT_START, &tstamp, resolution);
+		ti->ccallback(ti, event, &tstamp, resolution);
 	if (ti->flags & SNDRV_TIMER_IFLG_SLAVE)
 		return;
 	timer = ti->timer;
diff --git a/sound/isa/opti9xx/miro.c b/sound/isa/opti9xx/miro.c
index b865e45a8f9b..5913717c1be6 100644
--- a/sound/isa/opti9xx/miro.c
+++ b/sound/isa/opti9xx/miro.c
@@ -1558,7 +1558,7 @@ static int __devinit snd_card_miro_pnp(struct snd_miro *chip,
 
 	err = pnp_activate_dev(devmc);
 	if (err < 0) {
-		snd_printk(KERN_ERR "OPL syntg pnp configure failure: %d\n",
+		snd_printk(KERN_ERR "MC pnp configure failure: %d\n",
 				    err);
 		return err;
 	}
diff --git a/sound/isa/opti9xx/opti92x-ad1848.c b/sound/isa/opti9xx/opti92x-ad1848.c
index a4af53b5c1cf..4d2d0405bdc7 100644
--- a/sound/isa/opti9xx/opti92x-ad1848.c
+++ b/sound/isa/opti9xx/opti92x-ad1848.c
@@ -144,12 +144,8 @@ struct snd_opti9xx {
 
 	spinlock_t lock;
 
+	long wss_base;
 	int irq;
-
-#ifdef CONFIG_PNP
-	struct pnp_dev *dev;
-	struct pnp_dev *devmpu;
-#endif	/* CONFIG_PNP */
 };
 
 static int snd_opti9xx_pnp_is_probed;
@@ -159,12 +155,17 @@ static int snd_opti9xx_pnp_is_probed;
 static struct pnp_card_device_id snd_opti9xx_pnpids[] = {
 #ifndef OPTi93X
 	/* OPTi 82C924 */
-	{ .id = "OPT0924", .devs = { { "OPT0000" }, { "OPT0002" } }, .driver_data = 0x0924 },
+	{ .id = "OPT0924",
+	  .devs = { { "OPT0000" }, { "OPT0002" }, { "OPT0005" } },
+	  .driver_data = 0x0924 },
 	/* OPTi 82C925 */
-	{ .id = "OPT0925", .devs = { { "OPT9250" }, { "OPT0002" } }, .driver_data = 0x0925 },
+	{ .id = "OPT0925",
+	  .devs = { { "OPT9250" }, { "OPT0002" }, { "OPT0005" } },
+	  .driver_data = 0x0925 },
 #else
 	/* OPTi 82C931/3 */
-	{ .id = "OPT0931", .devs = { { "OPT9310" }, { "OPT0002" } }, .driver_data = 0x0931 },
+	{ .id = "OPT0931", .devs = { { "OPT9310" }, { "OPT0002" } },
+	  .driver_data = 0x0931 },
 #endif	/* OPTi93X */
 	{ .id = "" }
 };
@@ -207,24 +208,35 @@ static int __devinit snd_opti9xx_init(struct snd_opti9xx *chip,
 	chip->hardware = hardware;
 	strcpy(chip->name, snd_opti9xx_names[hardware]);
 
-	chip->mc_base_size = opti9xx_mc_size[hardware];  
-
 	spin_lock_init(&chip->lock);
 
 	chip->irq = -1;
 
+#ifndef OPTi93X
+#ifdef CONFIG_PNP
+	if (isapnp && chip->mc_base)
+		/* PnP resource gives the least 10 bits */
+		chip->mc_base |= 0xc00;
+	else
+#endif	/* CONFIG_PNP */
+	{
+		chip->mc_base = 0xf8c;
+		chip->mc_base_size = opti9xx_mc_size[hardware];
+	}
+#else
+		chip->mc_base_size = opti9xx_mc_size[hardware];
+#endif
+
 	switch (hardware) {
 #ifndef OPTi93X
 	case OPTi9XX_HW_82C928:
 	case OPTi9XX_HW_82C929:
-		chip->mc_base = 0xf8c;
 		chip->password = (hardware == OPTi9XX_HW_82C928) ? 0xe2 : 0xe3;
 		chip->pwd_reg = 3;
 		break;
 
 	case OPTi9XX_HW_82C924:
 	case OPTi9XX_HW_82C925:
-		chip->mc_base = 0xf8c;
 		chip->password = 0xe5;
 		chip->pwd_reg = 3;
 		break;
@@ -292,7 +304,7 @@ static unsigned char snd_opti9xx_read(struct snd_opti9xx *chip,
 	spin_unlock_irqrestore(&chip->lock, flags);
 	return retval;
 }
-	
+
 static void snd_opti9xx_write(struct snd_opti9xx *chip, unsigned char reg,
 			      unsigned char value)
 {
@@ -341,7 +353,7 @@ static void snd_opti9xx_write(struct snd_opti9xx *chip, unsigned char reg,
 
 
 static int __devinit snd_opti9xx_configure(struct snd_opti9xx *chip,
-					   long wss_base,
+					   long port,
 					   int irq, int dma1, int dma2,
 					   long mpu_port, int mpu_irq)
 {
@@ -354,16 +366,23 @@ static int __devinit snd_opti9xx_configure(struct snd_opti9xx *chip,
 	switch (chip->hardware) {
 #ifndef OPTi93X
 	case OPTi9XX_HW_82C924:
+		/* opti 929 mode (?), OPL3 clock output, audio enable */
 		snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(4), 0xf0, 0xfc);
+		/* enable wave audio */
 		snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(6), 0x02, 0x02);
 
 	case OPTi9XX_HW_82C925:
+		/* enable WSS mode */
 		snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(1), 0x80, 0x80);
+		/* OPL3 FM synthesis */
 		snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(2), 0x00, 0x20);
+		/* disable Sound Blaster IRQ and DMA */
 		snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(3), 0xf0, 0xff);
 #ifdef CS4231
+		/* cs4231/4248 fix enabled */
 		snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(5), 0x02, 0x02);
 #else
+		/* cs4231/4248 fix disabled */
 		snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(5), 0x00, 0x02);
 #endif	/* CS4231 */
 		break;
@@ -411,21 +430,26 @@ static int __devinit snd_opti9xx_configure(struct snd_opti9xx *chip,
 		return -EINVAL;
 	}
 
-	switch (wss_base) {
-	case 0x530:
+	/* PnP resource says it decodes only 10 bits of address */
+	switch (port & 0x3ff) {
+	case 0x130:
+		chip->wss_base = 0x530;
 		wss_base_bits = 0x00;
 		break;
-	case 0x604:
+	case 0x204:
+		chip->wss_base = 0x604;
 		wss_base_bits = 0x03;
 		break;
-	case 0xe80:
+	case 0x280:
+		chip->wss_base = 0xe80;
 		wss_base_bits = 0x01;
 		break;
-	case 0xf40:
+	case 0x340:
+		chip->wss_base = 0xf40;
 		wss_base_bits = 0x02;
 		break;
 	default:
-		snd_printk(KERN_WARNING "WSS port 0x%lx not valid\n", wss_base);
+		snd_printk(KERN_WARNING "WSS port 0x%lx not valid\n", port);
 		goto __skip_base;
 	}
 	snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(1), wss_base_bits << 4, 0x30);
@@ -487,7 +511,7 @@ __skip_base:
 #endif	/* CS4231 || OPTi93X */
 
 #ifndef OPTi93X
-	 outb(irq_bits << 3 | dma_bits, wss_base);
+	 outb(irq_bits << 3 | dma_bits, chip->wss_base);
 #else /* OPTi93X */
 	snd_opti9xx_write(chip, OPTi9XX_MC_REG(3), (irq_bits << 3 | dma_bits));
 #endif /* OPTi93X */
@@ -729,15 +753,15 @@ static int __devinit snd_card_opti9xx_pnp(struct snd_opti9xx *chip,
 {
 	struct pnp_dev *pdev;
 	int err;
+	struct pnp_dev *devmpu;
+#ifndef OPTi93X
+	struct pnp_dev *devmc;
+#endif
 
-	chip->dev = pnp_request_card_device(card, pid->devs[0].id, NULL);
-	if (chip->dev == NULL)
+	pdev = pnp_request_card_device(card, pid->devs[0].id, NULL);
+	if (pdev == NULL)
 		return -EBUSY;
 
-	chip->devmpu = pnp_request_card_device(card, pid->devs[1].id, NULL);
-
-	pdev = chip->dev;
-
 	err = pnp_activate_dev(pdev);
 	if (err < 0) {
 		snd_printk(KERN_ERR "AUDIO pnp configure failure: %d\n", err);
@@ -750,9 +774,24 @@ static int __devinit snd_card_opti9xx_pnp(struct snd_opti9xx *chip,
 	chip->mc_indir_index = pnp_port_start(pdev, 3) + 2;
 	chip->mc_indir_size = pnp_port_len(pdev, 3) - 2;
 #else
-	if (pid->driver_data != 0x0924)
-		port = pnp_port_start(pdev, 1);
+	devmc = pnp_request_card_device(card, pid->devs[2].id, NULL);
+	if (devmc == NULL)
+		return -EBUSY;
+
+	err = pnp_activate_dev(devmc);
+	if (err < 0) {
+		snd_printk(KERN_ERR "MC pnp configure failure: %d\n", err);
+		return err;
+	}
+
+	port = pnp_port_start(pdev, 1);
 	fm_port = pnp_port_start(pdev, 2) + 8;
+	/*
+	 * The MC(0) is never accessed and card does not
+	 * include it in the PnP resource range. OPTI93x include it.
+	 */
+	chip->mc_base = pnp_port_start(devmc, 0) - 1;
+	chip->mc_base_size = pnp_port_len(devmc, 0) + 1;
 #endif	/* OPTi93X */
 	irq = pnp_irq(pdev, 0);
 	dma1 = pnp_dma(pdev, 0);
@@ -760,16 +799,16 @@ static int __devinit snd_card_opti9xx_pnp(struct snd_opti9xx *chip,
 	dma2 = pnp_dma(pdev, 1);
 #endif	/* CS4231 || OPTi93X */
 
-	pdev = chip->devmpu;
-	if (pdev && mpu_port > 0) {
-		err = pnp_activate_dev(pdev);
+	devmpu = pnp_request_card_device(card, pid->devs[1].id, NULL);
+
+	if (devmpu && mpu_port > 0) {
+		err = pnp_activate_dev(devmpu);
 		if (err < 0) {
-			snd_printk(KERN_ERR "AUDIO pnp configure failure\n");
+			snd_printk(KERN_ERR "MPU401 pnp configure failure\n");
 			mpu_port = -1;
-			chip->devmpu = NULL;
 		} else {
-			mpu_port = pnp_port_start(pdev, 0);
-			mpu_irq = pnp_irq(pdev, 0);
+			mpu_port = pnp_port_start(devmpu, 0);
+			mpu_irq = pnp_irq(devmpu, 0);
 		}
 	}
 	return pid->driver_data;
@@ -824,7 +863,7 @@ static int __devinit snd_opti9xx_probe(struct snd_card *card)
 	if (error)
 		return error;
 
-	error = snd_wss_create(card, port + 4, -1, irq, dma1, xdma2,
+	error = snd_wss_create(card, chip->wss_base + 4, -1, irq, dma1, xdma2,
 #ifdef OPTi93X
 			       WSS_HW_OPTI93X, WSS_HWSHARE_IRQ,
 #else
@@ -865,10 +904,11 @@ static int __devinit snd_opti9xx_probe(struct snd_card *card)
 	sprintf(card->shortname, "OPTi %s", card->driver);
 #if defined(CS4231) || defined(OPTi93X)
 	sprintf(card->longname, "%s, %s at 0x%lx, irq %d, dma %d&%d",
-		card->shortname, pcm->name, port + 4, irq, dma1, xdma2);
+		card->shortname, pcm->name,
+		chip->wss_base + 4, irq, dma1, xdma2);
 #else
 	sprintf(card->longname, "%s, %s at 0x%lx, irq %d, dma %d",
-		card->shortname, pcm->name, port + 4, irq, dma1);
+		card->shortname, pcm->name, chip->wss_base + 4, irq, dma1);
 #endif	/* CS4231 || OPTi93X */
 
 	if (mpu_port <= 0 || mpu_port == SNDRV_AUTO_PORT)
@@ -1062,9 +1102,6 @@ static int __devinit snd_opti9xx_pnp_probe(struct pnp_card_link *pcard,
 		snd_card_free(card);
 		return error;
 	}
-	if (hw <= OPTi9XX_HW_82C930)
-		chip->mc_base -= 0x80;
-
 	error = snd_opti9xx_read_check(chip);
 	if (error) {
 		snd_printk(KERN_ERR "OPTI chip not found\n");
diff --git a/sound/isa/sb/jazz16.c b/sound/isa/sb/jazz16.c
index 8d21a3feda3a..8ccbcddf08e1 100644
--- a/sound/isa/sb/jazz16.c
+++ b/sound/isa/sb/jazz16.c
@@ -14,6 +14,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/io.h>
+#include <linux/delay.h>
 #include <asm/dma.h>
 #include <linux/isa.h>
 #include <sound/core.h>
diff --git a/sound/oss/coproc.h b/sound/oss/coproc.h
index 7306346e9ac4..7bec21bbdd88 100644
--- a/sound/oss/coproc.h
+++ b/sound/oss/coproc.h
@@ -4,7 +4,7 @@
  */
 
 /*
- * Coprocessor access types 
+ * Coprocessor access types
  */
 #define COPR_CUSTOM		0x0001	/* Custom applications */
 #define COPR_MIDI		0x0002	/* MIDI (MPU-401) emulation */
diff --git a/sound/oss/sequencer.c b/sound/oss/sequencer.c
index c79874696bec..e85789e53816 100644
--- a/sound/oss/sequencer.c
+++ b/sound/oss/sequencer.c
@@ -1631,8 +1631,6 @@ unsigned long compute_finetune(unsigned long base_freq, int bend, int range,
 	}
 
 	semitones = bend / 100;
-	if (semitones > 99)
-		semitones = 99;
 	cents = bend % 100;
 
 	amount = (int) (semitone_tuning[semitones] * multiplier * cent_tuning[cents]) / 10000;
diff --git a/sound/oss/v_midi.h b/sound/oss/v_midi.h
index 1b86cb45c607..08e2185ee816 100644
--- a/sound/oss/v_midi.h
+++ b/sound/oss/v_midi.h
@@ -2,9 +2,9 @@ typedef struct vmidi_devc {
 	   int dev;
 
 	/* State variables */
- 	   int opened;
+	   int opened;
 	   spinlock_t lock;
-	
+
 	/* MIDI fields */
 	   int my_mididev;
 	   int pair_mididev;
@@ -12,4 +12,3 @@ typedef struct vmidi_devc {
 	   int intr_active;
 	   void (*midi_input_intr) (int dev, unsigned char data);
 	} vmidi_devc;
-
diff --git a/sound/pci/hda/Kconfig b/sound/pci/hda/Kconfig
index 556cff937be7..567348b05b5a 100644
--- a/sound/pci/hda/Kconfig
+++ b/sound/pci/hda/Kconfig
@@ -157,7 +157,7 @@ config SND_HDA_CODEC_INTELHDMI
 
 config SND_HDA_ELD
 	def_bool y
-	depends on SND_HDA_CODEC_INTELHDMI
+	depends on SND_HDA_CODEC_INTELHDMI || SND_HDA_CODEC_NVHDMI
 
 config SND_HDA_CODEC_CIRRUS
 	bool "Build Cirrus Logic codec support"
diff --git a/sound/pci/hda/Makefile b/sound/pci/hda/Makefile
index 315a1c4f8998..24bc195b02da 100644
--- a/sound/pci/hda/Makefile
+++ b/sound/pci/hda/Makefile
@@ -3,7 +3,7 @@ snd-hda-intel-objs := hda_intel.o
 snd-hda-codec-y := hda_codec.o
 snd-hda-codec-$(CONFIG_SND_HDA_GENERIC) += hda_generic.o
 snd-hda-codec-$(CONFIG_PROC_FS) += hda_proc.o
-# snd-hda-codec-$(CONFIG_SND_HDA_ELD) += hda_eld.o
+snd-hda-codec-$(CONFIG_SND_HDA_ELD) += hda_eld.o
 snd-hda-codec-$(CONFIG_SND_HDA_HWDEP) += hda_hwdep.o
 snd-hda-codec-$(CONFIG_SND_HDA_INPUT_BEEP) += hda_beep.o
 
@@ -18,7 +18,7 @@ snd-hda-codec-ca0110-objs :=	patch_ca0110.o
 snd-hda-codec-conexant-objs :=	patch_conexant.o
 snd-hda-codec-via-objs :=	patch_via.o
 snd-hda-codec-nvhdmi-objs :=	patch_nvhdmi.o
-snd-hda-codec-intelhdmi-objs :=	patch_intelhdmi.o hda_eld.o
+snd-hda-codec-intelhdmi-objs :=	patch_intelhdmi.o
 
 # common driver
 obj-$(CONFIG_SND_HDA_INTEL) := snd-hda-codec.o
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 76d3c4c049db..0e76ac2b2ace 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -978,8 +978,9 @@ static void hda_set_power_state(struct hda_codec *codec, hda_nid_t fg,
  *
  * Returns 0 if successful, or a negative error code.
  */
-int /*__devinit*/ snd_hda_codec_new(struct hda_bus *bus, unsigned int codec_addr,
-				    struct hda_codec **codecp)
+int /*__devinit*/ snd_hda_codec_new(struct hda_bus *bus,
+				unsigned int codec_addr,
+				struct hda_codec **codecp)
 {
 	struct hda_codec *codec;
 	char component[31];
@@ -1186,7 +1187,7 @@ EXPORT_SYMBOL_HDA(snd_hda_codec_cleanup_stream);
  */
 
 /* FIXME: more better hash key? */
-#define HDA_HASH_KEY(nid,dir,idx) (u32)((nid) + ((idx) << 16) + ((dir) << 24))
+#define HDA_HASH_KEY(nid, dir, idx) (u32)((nid) + ((idx) << 16) + ((dir) << 24))
 #define HDA_HASH_PINCAP_KEY(nid) (u32)((nid) + (0x02 << 24))
 #define HDA_HASH_PARPCM_KEY(nid) (u32)((nid) + (0x03 << 24))
 #define HDA_HASH_PARSTR_KEY(nid) (u32)((nid) + (0x04 << 24))
@@ -1356,7 +1357,8 @@ u32 snd_hda_pin_sense(struct hda_codec *codec, hda_nid_t nid)
 	if (!codec->no_trigger_sense) {
 		pincap = snd_hda_query_pin_caps(codec, nid);
 		if (pincap & AC_PINCAP_TRIG_REQ) /* need trigger? */
-			snd_hda_codec_read(codec, nid, 0, AC_VERB_SET_PIN_SENSE, 0);
+			snd_hda_codec_read(codec, nid, 0,
+					AC_VERB_SET_PIN_SENSE, 0);
 	}
 	return snd_hda_codec_read(codec, nid, 0,
 				  AC_VERB_GET_PIN_SENSE, 0);
@@ -1372,8 +1374,8 @@ EXPORT_SYMBOL_HDA(snd_hda_pin_sense);
  */
 int snd_hda_jack_detect(struct hda_codec *codec, hda_nid_t nid)
 {
-        u32 sense = snd_hda_pin_sense(codec, nid);
-        return !!(sense & AC_PINSENSE_PRESENCE);
+	u32 sense = snd_hda_pin_sense(codec, nid);
+	return !!(sense & AC_PINSENSE_PRESENCE);
 }
 EXPORT_SYMBOL_HDA(snd_hda_jack_detect);
 
@@ -1804,6 +1806,8 @@ int snd_hda_add_nid(struct hda_codec *codec, struct snd_kcontrol *kctl,
 		item->nid = nid;
 		return 0;
 	}
+	printk(KERN_ERR "hda-codec: no NID for mapping control %s:%d:%d\n",
+	       kctl->id.name, kctl->id.index, index);
 	return -EINVAL;
 }
 EXPORT_SYMBOL_HDA(snd_hda_add_nid);
@@ -1952,7 +1956,7 @@ int snd_hda_add_vmaster(struct hda_codec *codec, char *name,
 	err = snd_hda_ctl_add(codec, 0, kctl);
 	if (err < 0)
 		return err;
-	
+
 	for (s = slaves; *s; s++) {
 		struct snd_kcontrol *sctl;
 		int i = 0;
@@ -2439,27 +2443,27 @@ static struct snd_kcontrol_new dig_mixes[] = {
 	{
 		.access = SNDRV_CTL_ELEM_ACCESS_READ,
 		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-		.name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,CON_MASK),
+		.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, CON_MASK),
 		.info = snd_hda_spdif_mask_info,
 		.get = snd_hda_spdif_cmask_get,
 	},
 	{
 		.access = SNDRV_CTL_ELEM_ACCESS_READ,
 		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-		.name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,PRO_MASK),
+		.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, PRO_MASK),
 		.info = snd_hda_spdif_mask_info,
 		.get = snd_hda_spdif_pmask_get,
 	},
 	{
 		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-		.name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,DEFAULT),
+		.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, DEFAULT),
 		.info = snd_hda_spdif_mask_info,
 		.get = snd_hda_spdif_default_get,
 		.put = snd_hda_spdif_default_put,
 	},
 	{
 		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-		.name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,SWITCH),
+		.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, SWITCH),
 		.info = snd_hda_spdif_out_switch_info,
 		.get = snd_hda_spdif_out_switch_get,
 		.put = snd_hda_spdif_out_switch_put,
@@ -2610,7 +2614,7 @@ static int snd_hda_spdif_in_status_get(struct snd_kcontrol *kcontrol,
 static struct snd_kcontrol_new dig_in_ctls[] = {
 	{
 		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-		.name = SNDRV_CTL_NAME_IEC958("",CAPTURE,SWITCH),
+		.name = SNDRV_CTL_NAME_IEC958("", CAPTURE, SWITCH),
 		.info = snd_hda_spdif_in_switch_info,
 		.get = snd_hda_spdif_in_switch_get,
 		.put = snd_hda_spdif_in_switch_put,
@@ -2618,7 +2622,7 @@ static struct snd_kcontrol_new dig_in_ctls[] = {
 	{
 		.access = SNDRV_CTL_ELEM_ACCESS_READ,
 		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-		.name = SNDRV_CTL_NAME_IEC958("",CAPTURE,DEFAULT),
+		.name = SNDRV_CTL_NAME_IEC958("", CAPTURE, DEFAULT),
 		.info = snd_hda_spdif_mask_info,
 		.get = snd_hda_spdif_in_status_get,
 	},
@@ -2882,8 +2886,8 @@ int /*__devinit*/ snd_hda_build_controls(struct hda_bus *bus)
 	list_for_each_entry(codec, &bus->codec_list, list) {
 		int err = snd_hda_codec_build_controls(codec);
 		if (err < 0) {
-			printk(KERN_ERR "hda_codec: cannot build controls"
-			       "for #%d (error %d)\n", codec->addr, err); 
+			printk(KERN_ERR "hda_codec: cannot build controls "
+			       "for #%d (error %d)\n", codec->addr, err);
 			err = snd_hda_codec_reset(codec);
 			if (err < 0) {
 				printk(KERN_ERR
@@ -2979,8 +2983,12 @@ unsigned int snd_hda_calc_stream_format(unsigned int rate,
 	val |= channels - 1;
 
 	switch (snd_pcm_format_width(format)) {
-	case 8:  val |= 0x00; break;
-	case 16: val |= 0x10; break;
+	case 8:
+		val |= 0x00;
+		break;
+	case 16:
+		val |= 0x10;
+		break;
 	case 20:
 	case 24:
 	case 32:
@@ -3298,7 +3306,8 @@ static int get_empty_pcm_device(struct hda_bus *bus, int type)
 		if (!test_and_set_bit(audio_idx[type][i], bus->pcm_dev_bits))
 			return audio_idx[type][i];
 
-	snd_printk(KERN_WARNING "Too many %s devices\n", snd_hda_pcm_type_name[type]);
+	snd_printk(KERN_WARNING "Too many %s devices\n",
+		snd_hda_pcm_type_name[type]);
 	return -EAGAIN;
 }
 
@@ -3336,7 +3345,7 @@ int snd_hda_codec_build_pcms(struct hda_codec *codec)
 		err = codec->patch_ops.build_pcms(codec);
 		if (err < 0) {
 			printk(KERN_ERR "hda_codec: cannot build PCMs"
-			       "for #%d (error %d)\n", codec->addr, err); 
+			       "for #%d (error %d)\n", codec->addr, err);
 			err = snd_hda_codec_reset(codec);
 			if (err < 0) {
 				printk(KERN_ERR
@@ -3466,8 +3475,8 @@ EXPORT_SYMBOL_HDA(snd_hda_check_board_config);
 
 /**
  * snd_hda_check_board_codec_sid_config - compare the current codec
-				          subsystem ID with the
-					  config table
+					subsystem ID with the
+					config table
 
 	   This is important for Gateway notebooks with SB450 HDA Audio
 	   where the vendor ID of the PCI device is:
@@ -3607,7 +3616,7 @@ void snd_hda_update_power_acct(struct hda_codec *codec)
  *
  * Increment the power-up counter and power up the hardware really when
  * not turned on yet.
- */ 
+ */
 void snd_hda_power_up(struct hda_codec *codec)
 {
 	struct hda_bus *bus = codec->bus;
@@ -3636,7 +3645,7 @@ EXPORT_SYMBOL_HDA(snd_hda_power_up);
  *
  * Decrement the power-up counter and schedules the power-off work if
  * the counter rearches to zero.
- */ 
+ */
 void snd_hda_power_down(struct hda_codec *codec)
 {
 	--codec->power_count;
@@ -3662,7 +3671,7 @@ EXPORT_SYMBOL_HDA(snd_hda_power_down);
  *
  * This function is supposed to be set or called from the check_power_status
  * patch ops.
- */ 
+ */
 int snd_hda_check_amp_list_power(struct hda_codec *codec,
 				 struct hda_loopback_check *check,
 				 hda_nid_t nid)
@@ -3830,7 +3839,7 @@ static void setup_dig_out_stream(struct hda_codec *codec, hda_nid_t nid,
 {
 	/* turn off SPDIF once; otherwise the IEC958 bits won't be updated */
 	if (codec->spdif_status_reset && (codec->spdif_ctls & AC_DIG1_ENABLE))
-		set_dig_out_convert(codec, nid, 
+		set_dig_out_convert(codec, nid,
 				    codec->spdif_ctls & ~AC_DIG1_ENABLE & 0xff,
 				    -1);
 	snd_hda_codec_setup_stream(codec, nid, stream_tag, 0, format);
@@ -4089,13 +4098,13 @@ static int is_in_nid_list(hda_nid_t nid, hda_nid_t *list)
 /*
  * Sort an associated group of pins according to their sequence numbers.
  */
-static void sort_pins_by_sequence(hda_nid_t * pins, short * sequences,
+static void sort_pins_by_sequence(hda_nid_t *pins, short *sequences,
 				  int num_pins)
 {
 	int i, j;
 	short seq;
 	hda_nid_t nid;
-	
+
 	for (i = 0; i < num_pins; i++) {
 		for (j = i + 1; j < num_pins; j++) {
 			if (sequences[i] > sequences[j]) {
@@ -4123,7 +4132,7 @@ static void sort_pins_by_sequence(hda_nid_t * pins, short * sequences,
  * is detected, one of speaker of HP pins is assigned as the primary
  * output, i.e. to line_out_pins[0].  So, line_outs is always positive
  * if any analog output exists.
- * 
+ *
  * The analog input pins are assigned to input_pins array.
  * The digital input/output pins are assigned to dig_in_pin and dig_out_pin,
  * respectively.
@@ -4186,9 +4195,9 @@ int snd_hda_parse_pin_def_config(struct hda_codec *codec,
 		case AC_JACK_SPEAKER:
 			seq = get_defcfg_sequence(def_conf);
 			assoc = get_defcfg_association(def_conf);
-			if (! assoc)
+			if (!assoc)
 				continue;
-			if (! assoc_speaker)
+			if (!assoc_speaker)
 				assoc_speaker = assoc;
 			else if (assoc_speaker != assoc)
 				continue;
@@ -4286,7 +4295,7 @@ int snd_hda_parse_pin_def_config(struct hda_codec *codec,
 			      cfg->speaker_outs);
 	sort_pins_by_sequence(cfg->hp_pins, sequences_hp,
 			      cfg->hp_outs);
-	
+
 	/* if we have only one mic, make it AUTO_PIN_MIC */
 	if (!cfg->input_pins[AUTO_PIN_MIC] &&
 	    cfg->input_pins[AUTO_PIN_FRONT_MIC]) {
@@ -4436,7 +4445,7 @@ EXPORT_SYMBOL_HDA(snd_hda_resume);
 /**
  * snd_array_new - get a new element from the given array
  * @array: the array object
- * 
+ *
  * Get a new element from the given array.  If it exceeds the
  * pre-allocated array size, re-allocate the array.
  *
diff --git a/sound/pci/hda/hda_eld.c b/sound/pci/hda/hda_eld.c
index 4228f2fe5956..dcd22446cfc7 100644
--- a/sound/pci/hda/hda_eld.c
+++ b/sound/pci/hda/hda_eld.c
@@ -331,6 +331,7 @@ int snd_hdmi_get_eld_size(struct hda_codec *codec, hda_nid_t nid)
 	return snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_HDMI_DIP_SIZE,
 						 AC_DIPSIZE_ELD_BUF);
 }
+EXPORT_SYMBOL_HDA(snd_hdmi_get_eld_size);
 
 int snd_hdmi_get_eld(struct hdmi_eld *eld,
 		     struct hda_codec *codec, hda_nid_t nid)
@@ -366,6 +367,7 @@ int snd_hdmi_get_eld(struct hdmi_eld *eld,
 	kfree(buf);
 	return ret;
 }
+EXPORT_SYMBOL_HDA(snd_hdmi_get_eld);
 
 static void hdmi_show_short_audio_desc(struct cea_sad *a)
 {
@@ -404,6 +406,7 @@ void snd_print_channel_allocation(int spk_alloc, char *buf, int buflen)
 	}
 	buf[j] = '\0';	/* necessary when j == 0 */
 }
+EXPORT_SYMBOL_HDA(snd_print_channel_allocation);
 
 void snd_hdmi_show_eld(struct hdmi_eld *e)
 {
@@ -422,6 +425,7 @@ void snd_hdmi_show_eld(struct hdmi_eld *e)
 	for (i = 0; i < e->sad_count; i++)
 		hdmi_show_short_audio_desc(e->sad + i);
 }
+EXPORT_SYMBOL_HDA(snd_hdmi_show_eld);
 
 #ifdef CONFIG_PROC_FS
 
@@ -580,6 +584,7 @@ int snd_hda_eld_proc_new(struct hda_codec *codec, struct hdmi_eld *eld,
 
 	return 0;
 }
+EXPORT_SYMBOL_HDA(snd_hda_eld_proc_new);
 
 void snd_hda_eld_proc_free(struct hda_codec *codec, struct hdmi_eld *eld)
 {
@@ -588,5 +593,6 @@ void snd_hda_eld_proc_free(struct hda_codec *codec, struct hdmi_eld *eld)
 		eld->proc_entry = NULL;
 	}
 }
+EXPORT_SYMBOL_HDA(snd_hda_eld_proc_free);
 
 #endif /* CONFIG_PROC_FS */
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index d5c93ad852ee..8b2915631cc3 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -267,7 +267,8 @@ enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 };
 #define RIRB_INT_MASK		0x05
 
 /* STATESTS int mask: S3,SD2,SD1,SD0 */
-#define AZX_MAX_CODECS		4
+#define AZX_MAX_CODECS		8
+#define AZX_DEFAULT_CODECS	4
 #define STATESTS_INT_MASK	((1 << AZX_MAX_CODECS) - 1)
 
 /* SD_CTL bits */
@@ -1367,6 +1368,7 @@ static void azx_bus_reset(struct hda_bus *bus)
 
 /* number of codec slots for each chipset: 0 = default slots (i.e. 4) */
 static unsigned int azx_max_codecs[AZX_NUM_DRIVERS] __devinitdata = {
+	[AZX_DRIVER_NVIDIA] = 8,
 	[AZX_DRIVER_TERA] = 1,
 };
 
@@ -1399,7 +1401,7 @@ static int __devinit azx_codec_create(struct azx *chip, const char *model)
 	codecs = 0;
 	max_slots = azx_max_codecs[chip->driver_type];
 	if (!max_slots)
-		max_slots = AZX_MAX_CODECS;
+		max_slots = AZX_DEFAULT_CODECS;
 
 	/* First try to probe all given codec slots */
 	for (c = 0; c < max_slots; c++) {
@@ -2263,10 +2265,13 @@ static int azx_dev_free(struct snd_device *device)
 static struct snd_pci_quirk position_fix_list[] __devinitdata = {
 	SND_PCI_QUIRK(0x1028, 0x01cc, "Dell D820", POS_FIX_LPIB),
 	SND_PCI_QUIRK(0x1028, 0x01de, "Dell Precision 390", POS_FIX_LPIB),
+	SND_PCI_QUIRK(0x1028, 0x01f6, "Dell Latitude 131L", POS_FIX_LPIB),
 	SND_PCI_QUIRK(0x103c, 0x306d, "HP dv3", POS_FIX_LPIB),
 	SND_PCI_QUIRK(0x1106, 0x3288, "ASUS M2V-MX SE", POS_FIX_LPIB),
 	SND_PCI_QUIRK(0x1043, 0x813d, "ASUS P5AD2", POS_FIX_LPIB),
 	SND_PCI_QUIRK(0x1462, 0x1002, "MSI Wind U115", POS_FIX_LPIB),
+	SND_PCI_QUIRK(0x1565, 0x820f, "Biostar Microtech", POS_FIX_LPIB),
+	SND_PCI_QUIRK(0x8086, 0xd601, "eMachines T5212", POS_FIX_LPIB),
 	{}
 };
 
@@ -2354,6 +2359,8 @@ static void __devinit check_probe_mask(struct azx *chip, int dev)
 static struct snd_pci_quirk msi_black_list[] __devinitdata = {
 	SND_PCI_QUIRK(0x1043, 0x81f2, "ASUS", 0), /* Athlon64 X2 + nvidia */
 	SND_PCI_QUIRK(0x1043, 0x81f6, "ASUS", 0), /* nvidia */
+	SND_PCI_QUIRK(0x1043, 0x822d, "ASUS", 0), /* Athlon64 X2 + nvidia MCP55 */
+	SND_PCI_QUIRK(0x1849, 0x0888, "ASRock", 0), /* Athlon64 X2 + nvidia */
 	{}
 };
 
@@ -2372,6 +2379,13 @@ static void __devinit check_msi(struct azx *chip)
 		       "hda_intel: msi for device %04x:%04x set to %d\n",
 		       q->subvendor, q->subdevice, q->value);
 		chip->msi = q->value;
+		return;
+	}
+
+	/* NVidia chipsets seem to cause troubles with MSI */
+	if (chip->driver_type == AZX_DRIVER_NVIDIA) {
+		printk(KERN_INFO "hda_intel: Disable MSI for Nvidia chipset\n");
+		chip->msi = 0;
 	}
 }
 
@@ -2700,6 +2714,7 @@ static DEFINE_PCI_DEVICE_TABLE(azx_ids) = {
 	{ PCI_DEVICE(0x8086, 0x3a6e), .driver_data = AZX_DRIVER_ICH },
 	/* PCH */
 	{ PCI_DEVICE(0x8086, 0x3b56), .driver_data = AZX_DRIVER_ICH },
+	{ PCI_DEVICE(0x8086, 0x3b57), .driver_data = AZX_DRIVER_ICH },
 	/* CPT */
 	{ PCI_DEVICE(0x8086, 0x1c20), .driver_data = AZX_DRIVER_PCH },
 	/* SCH */
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
new file mode 100644
index 000000000000..2c2bafbf0258
--- /dev/null
+++ b/sound/pci/hda/patch_hdmi.c
@@ -0,0 +1,849 @@
+/*
+ *
+ *  patch_hdmi.c - routines for HDMI/DisplayPort codecs
+ *
+ *  Copyright(c) 2008-2010 Intel Corporation. All rights reserved.
+ *
+ *  Authors:
+ *			Wu Fengguang <wfg@linux.intel.com>
+ *
+ *  Maintained by:
+ *			Wu Fengguang <wfg@linux.intel.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License as published by the Free
+ *  Software Foundation; either version 2 of the License, or (at your option)
+ *  any later version.
+ *
+ *  This program is distributed in the hope that it will be useful, but
+ *  WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ *  or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software Foundation,
+ *  Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+
+struct hdmi_spec {
+	int num_cvts;
+	int num_pins;
+	hda_nid_t cvt[MAX_HDMI_CVTS+1];  /* audio sources */
+	hda_nid_t pin[MAX_HDMI_PINS+1];  /* audio sinks */
+
+	/*
+	 * source connection for each pin
+	 */
+	hda_nid_t pin_cvt[MAX_HDMI_PINS+1];
+
+	/*
+	 * HDMI sink attached to each pin
+	 */
+	struct hdmi_eld sink_eld[MAX_HDMI_PINS];
+
+	/*
+	 * export one pcm per pipe
+	 */
+	struct hda_pcm	pcm_rec[MAX_HDMI_CVTS];
+
+	/*
+	 * nvhdmi specific
+	 */
+	struct hda_multi_out multiout;
+	unsigned int codec_type;
+};
+
+
+struct hdmi_audio_infoframe {
+	u8 type; /* 0x84 */
+	u8 ver;  /* 0x01 */
+	u8 len;  /* 0x0a */
+
+	u8 checksum;	/* PB0 */
+	u8 CC02_CT47;	/* CC in bits 0:2, CT in 4:7 */
+	u8 SS01_SF24;
+	u8 CXT04;
+	u8 CA;
+	u8 LFEPBL01_LSV36_DM_INH7;
+	u8 reserved[5];	/* PB6 - PB10 */
+};
+
+/*
+ * CEA speaker placement:
+ *
+ *        FLH       FCH        FRH
+ *  FLW    FL  FLC   FC   FRC   FR   FRW
+ *
+ *                                  LFE
+ *                     TC
+ *
+ *          RL  RLC   RC   RRC   RR
+ *
+ * The Left/Right Surround channel _notions_ LS/RS in SMPTE 320M corresponds to
+ * CEA RL/RR; The SMPTE channel _assignment_ C/LFE is swapped to CEA LFE/FC.
+ */
+enum cea_speaker_placement {
+	FL  = (1 <<  0),	/* Front Left           */
+	FC  = (1 <<  1),	/* Front Center         */
+	FR  = (1 <<  2),	/* Front Right          */
+	FLC = (1 <<  3),	/* Front Left Center    */
+	FRC = (1 <<  4),	/* Front Right Center   */
+	RL  = (1 <<  5),	/* Rear Left            */
+	RC  = (1 <<  6),	/* Rear Center          */
+	RR  = (1 <<  7),	/* Rear Right           */
+	RLC = (1 <<  8),	/* Rear Left Center     */
+	RRC = (1 <<  9),	/* Rear Right Center    */
+	LFE = (1 << 10),	/* Low Frequency Effect */
+	FLW = (1 << 11),	/* Front Left Wide      */
+	FRW = (1 << 12),	/* Front Right Wide     */
+	FLH = (1 << 13),	/* Front Left High      */
+	FCH = (1 << 14),	/* Front Center High    */
+	FRH = (1 << 15),	/* Front Right High     */
+	TC  = (1 << 16),	/* Top Center           */
+};
+
+/*
+ * ELD SA bits in the CEA Speaker Allocation data block
+ */
+static int eld_speaker_allocation_bits[] = {
+	[0] = FL | FR,
+	[1] = LFE,
+	[2] = FC,
+	[3] = RL | RR,
+	[4] = RC,
+	[5] = FLC | FRC,
+	[6] = RLC | RRC,
+	/* the following are not defined in ELD yet */
+	[7] = FLW | FRW,
+	[8] = FLH | FRH,
+	[9] = TC,
+	[10] = FCH,
+};
+
+struct cea_channel_speaker_allocation {
+	int ca_index;
+	int speakers[8];
+
+	/* derived values, just for convenience */
+	int channels;
+	int spk_mask;
+};
+
+/*
+ * ALSA sequence is:
+ *
+ *       surround40   surround41   surround50   surround51   surround71
+ * ch0   front left   =            =            =            =
+ * ch1   front right  =            =            =            =
+ * ch2   rear left    =            =            =            =
+ * ch3   rear right   =            =            =            =
+ * ch4                LFE          center       center       center
+ * ch5                                          LFE          LFE
+ * ch6                                                       side left
+ * ch7                                                       side right
+ *
+ * surround71 = {FL, FR, RLC, RRC, FC, LFE, RL, RR}
+ */
+static int hdmi_channel_mapping[0x32][8] = {
+	/* stereo */
+	[0x00] = { 0x00, 0x11, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7 },
+	/* 2.1 */
+	[0x01] = { 0x00, 0x11, 0x22, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7 },
+	/* Dolby Surround */
+	[0x02] = { 0x00, 0x11, 0x23, 0xf2, 0xf4, 0xf5, 0xf6, 0xf7 },
+	/* surround40 */
+	[0x08] = { 0x00, 0x11, 0x24, 0x35, 0xf3, 0xf2, 0xf6, 0xf7 },
+	/* 4ch */
+	[0x03] = { 0x00, 0x11, 0x23, 0x32, 0x44, 0xf5, 0xf6, 0xf7 },
+	/* surround41 */
+	[0x09] = { 0x00, 0x11, 0x24, 0x34, 0x43, 0xf2, 0xf6, 0xf7 },
+	/* surround50 */
+	[0x0a] = { 0x00, 0x11, 0x24, 0x35, 0x43, 0xf2, 0xf6, 0xf7 },
+	/* surround51 */
+	[0x0b] = { 0x00, 0x11, 0x24, 0x35, 0x43, 0x52, 0xf6, 0xf7 },
+	/* 7.1 */
+	[0x13] = { 0x00, 0x11, 0x26, 0x37, 0x43, 0x52, 0x64, 0x75 },
+};
+
+/*
+ * This is an ordered list!
+ *
+ * The preceding ones have better chances to be selected by
+ * hdmi_setup_channel_allocation().
+ */
+static struct cea_channel_speaker_allocation channel_allocations[] = {
+/*			  channel:   7     6    5    4    3     2    1    0  */
+{ .ca_index = 0x00,  .speakers = {   0,    0,   0,   0,   0,    0,  FR,  FL } },
+				 /* 2.1 */
+{ .ca_index = 0x01,  .speakers = {   0,    0,   0,   0,   0,  LFE,  FR,  FL } },
+				 /* Dolby Surround */
+{ .ca_index = 0x02,  .speakers = {   0,    0,   0,   0,  FC,    0,  FR,  FL } },
+				 /* surround40 */
+{ .ca_index = 0x08,  .speakers = {   0,    0,  RR,  RL,   0,    0,  FR,  FL } },
+				 /* surround41 */
+{ .ca_index = 0x09,  .speakers = {   0,    0,  RR,  RL,   0,  LFE,  FR,  FL } },
+				 /* surround50 */
+{ .ca_index = 0x0a,  .speakers = {   0,    0,  RR,  RL,  FC,    0,  FR,  FL } },
+				 /* surround51 */
+{ .ca_index = 0x0b,  .speakers = {   0,    0,  RR,  RL,  FC,  LFE,  FR,  FL } },
+				 /* 6.1 */
+{ .ca_index = 0x0f,  .speakers = {   0,   RC,  RR,  RL,  FC,  LFE,  FR,  FL } },
+				 /* surround71 */
+{ .ca_index = 0x13,  .speakers = { RRC,  RLC,  RR,  RL,  FC,  LFE,  FR,  FL } },
+
+{ .ca_index = 0x03,  .speakers = {   0,    0,   0,   0,  FC,  LFE,  FR,  FL } },
+{ .ca_index = 0x04,  .speakers = {   0,    0,   0,  RC,   0,    0,  FR,  FL } },
+{ .ca_index = 0x05,  .speakers = {   0,    0,   0,  RC,   0,  LFE,  FR,  FL } },
+{ .ca_index = 0x06,  .speakers = {   0,    0,   0,  RC,  FC,    0,  FR,  FL } },
+{ .ca_index = 0x07,  .speakers = {   0,    0,   0,  RC,  FC,  LFE,  FR,  FL } },
+{ .ca_index = 0x0c,  .speakers = {   0,   RC,  RR,  RL,   0,    0,  FR,  FL } },
+{ .ca_index = 0x0d,  .speakers = {   0,   RC,  RR,  RL,   0,  LFE,  FR,  FL } },
+{ .ca_index = 0x0e,  .speakers = {   0,   RC,  RR,  RL,  FC,    0,  FR,  FL } },
+{ .ca_index = 0x10,  .speakers = { RRC,  RLC,  RR,  RL,   0,    0,  FR,  FL } },
+{ .ca_index = 0x11,  .speakers = { RRC,  RLC,  RR,  RL,   0,  LFE,  FR,  FL } },
+{ .ca_index = 0x12,  .speakers = { RRC,  RLC,  RR,  RL,  FC,    0,  FR,  FL } },
+{ .ca_index = 0x14,  .speakers = { FRC,  FLC,   0,   0,   0,    0,  FR,  FL } },
+{ .ca_index = 0x15,  .speakers = { FRC,  FLC,   0,   0,   0,  LFE,  FR,  FL } },
+{ .ca_index = 0x16,  .speakers = { FRC,  FLC,   0,   0,  FC,    0,  FR,  FL } },
+{ .ca_index = 0x17,  .speakers = { FRC,  FLC,   0,   0,  FC,  LFE,  FR,  FL } },
+{ .ca_index = 0x18,  .speakers = { FRC,  FLC,   0,  RC,   0,    0,  FR,  FL } },
+{ .ca_index = 0x19,  .speakers = { FRC,  FLC,   0,  RC,   0,  LFE,  FR,  FL } },
+{ .ca_index = 0x1a,  .speakers = { FRC,  FLC,   0,  RC,  FC,    0,  FR,  FL } },
+{ .ca_index = 0x1b,  .speakers = { FRC,  FLC,   0,  RC,  FC,  LFE,  FR,  FL } },
+{ .ca_index = 0x1c,  .speakers = { FRC,  FLC,  RR,  RL,   0,    0,  FR,  FL } },
+{ .ca_index = 0x1d,  .speakers = { FRC,  FLC,  RR,  RL,   0,  LFE,  FR,  FL } },
+{ .ca_index = 0x1e,  .speakers = { FRC,  FLC,  RR,  RL,  FC,    0,  FR,  FL } },
+{ .ca_index = 0x1f,  .speakers = { FRC,  FLC,  RR,  RL,  FC,  LFE,  FR,  FL } },
+{ .ca_index = 0x20,  .speakers = {   0,  FCH,  RR,  RL,  FC,    0,  FR,  FL } },
+{ .ca_index = 0x21,  .speakers = {   0,  FCH,  RR,  RL,  FC,  LFE,  FR,  FL } },
+{ .ca_index = 0x22,  .speakers = {  TC,    0,  RR,  RL,  FC,    0,  FR,  FL } },
+{ .ca_index = 0x23,  .speakers = {  TC,    0,  RR,  RL,  FC,  LFE,  FR,  FL } },
+{ .ca_index = 0x24,  .speakers = { FRH,  FLH,  RR,  RL,   0,    0,  FR,  FL } },
+{ .ca_index = 0x25,  .speakers = { FRH,  FLH,  RR,  RL,   0,  LFE,  FR,  FL } },
+{ .ca_index = 0x26,  .speakers = { FRW,  FLW,  RR,  RL,   0,    0,  FR,  FL } },
+{ .ca_index = 0x27,  .speakers = { FRW,  FLW,  RR,  RL,   0,  LFE,  FR,  FL } },
+{ .ca_index = 0x28,  .speakers = {  TC,   RC,  RR,  RL,  FC,    0,  FR,  FL } },
+{ .ca_index = 0x29,  .speakers = {  TC,   RC,  RR,  RL,  FC,  LFE,  FR,  FL } },
+{ .ca_index = 0x2a,  .speakers = { FCH,   RC,  RR,  RL,  FC,    0,  FR,  FL } },
+{ .ca_index = 0x2b,  .speakers = { FCH,   RC,  RR,  RL,  FC,  LFE,  FR,  FL } },
+{ .ca_index = 0x2c,  .speakers = {  TC,  FCH,  RR,  RL,  FC,    0,  FR,  FL } },
+{ .ca_index = 0x2d,  .speakers = {  TC,  FCH,  RR,  RL,  FC,  LFE,  FR,  FL } },
+{ .ca_index = 0x2e,  .speakers = { FRH,  FLH,  RR,  RL,  FC,    0,  FR,  FL } },
+{ .ca_index = 0x2f,  .speakers = { FRH,  FLH,  RR,  RL,  FC,  LFE,  FR,  FL } },
+{ .ca_index = 0x30,  .speakers = { FRW,  FLW,  RR,  RL,  FC,    0,  FR,  FL } },
+{ .ca_index = 0x31,  .speakers = { FRW,  FLW,  RR,  RL,  FC,  LFE,  FR,  FL } },
+};
+
+
+/*
+ * HDMI routines
+ */
+
+static int hda_node_index(hda_nid_t *nids, hda_nid_t nid)
+{
+	int i;
+
+	for (i = 0; nids[i]; i++)
+		if (nids[i] == nid)
+			return i;
+
+	snd_printk(KERN_WARNING "HDMI: nid %d not registered\n", nid);
+	return -EINVAL;
+}
+
+static void hdmi_get_show_eld(struct hda_codec *codec, hda_nid_t pin_nid,
+			      struct hdmi_eld *eld)
+{
+	if (!snd_hdmi_get_eld(eld, codec, pin_nid))
+		snd_hdmi_show_eld(eld);
+}
+
+#ifdef BE_PARANOID
+static void hdmi_get_dip_index(struct hda_codec *codec, hda_nid_t pin_nid,
+				int *packet_index, int *byte_index)
+{
+	int val;
+
+	val = snd_hda_codec_read(codec, pin_nid, 0,
+				 AC_VERB_GET_HDMI_DIP_INDEX, 0);
+
+	*packet_index = val >> 5;
+	*byte_index = val & 0x1f;
+}
+#endif
+
+static void hdmi_set_dip_index(struct hda_codec *codec, hda_nid_t pin_nid,
+				int packet_index, int byte_index)
+{
+	int val;
+
+	val = (packet_index << 5) | (byte_index & 0x1f);
+
+	snd_hda_codec_write(codec, pin_nid, 0, AC_VERB_SET_HDMI_DIP_INDEX, val);
+}
+
+static void hdmi_write_dip_byte(struct hda_codec *codec, hda_nid_t pin_nid,
+				unsigned char val)
+{
+	snd_hda_codec_write(codec, pin_nid, 0, AC_VERB_SET_HDMI_DIP_DATA, val);
+}
+
+static void hdmi_enable_output(struct hda_codec *codec, hda_nid_t pin_nid)
+{
+	/* Unmute */
+	if (get_wcaps(codec, pin_nid) & AC_WCAP_OUT_AMP)
+		snd_hda_codec_write(codec, pin_nid, 0,
+				AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE);
+	/* Enable pin out */
+	snd_hda_codec_write(codec, pin_nid, 0,
+			    AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT);
+}
+
+static int hdmi_get_channel_count(struct hda_codec *codec, hda_nid_t nid)
+{
+	return 1 + snd_hda_codec_read(codec, nid, 0,
+					AC_VERB_GET_CVT_CHAN_COUNT, 0);
+}
+
+static void hdmi_set_channel_count(struct hda_codec *codec,
+				   hda_nid_t nid, int chs)
+{
+	if (chs != hdmi_get_channel_count(codec, nid))
+		snd_hda_codec_write(codec, nid, 0,
+				    AC_VERB_SET_CVT_CHAN_COUNT, chs - 1);
+}
+
+
+/*
+ * Channel mapping routines
+ */
+
+/*
+ * Compute derived values in channel_allocations[].
+ */
+static void init_channel_allocations(void)
+{
+	int i, j;
+	struct cea_channel_speaker_allocation *p;
+
+	for (i = 0; i < ARRAY_SIZE(channel_allocations); i++) {
+		p = channel_allocations + i;
+		p->channels = 0;
+		p->spk_mask = 0;
+		for (j = 0; j < ARRAY_SIZE(p->speakers); j++)
+			if (p->speakers[j]) {
+				p->channels++;
+				p->spk_mask |= p->speakers[j];
+			}
+	}
+}
+
+/*
+ * The transformation takes two steps:
+ *
+ *	eld->spk_alloc => (eld_speaker_allocation_bits[]) => spk_mask
+ *	      spk_mask => (channel_allocations[])         => ai->CA
+ *
+ * TODO: it could select the wrong CA from multiple candidates.
+*/
+static int hdmi_setup_channel_allocation(struct hda_codec *codec, hda_nid_t nid,
+					 struct hdmi_audio_infoframe *ai)
+{
+	struct hdmi_spec *spec = codec->spec;
+	struct hdmi_eld *eld;
+	int i;
+	int spk_mask = 0;
+	int channels = 1 + (ai->CC02_CT47 & 0x7);
+	char buf[SND_PRINT_CHANNEL_ALLOCATION_ADVISED_BUFSIZE];
+
+	/*
+	 * CA defaults to 0 for basic stereo audio
+	 */
+	if (channels <= 2)
+		return 0;
+
+	i = hda_node_index(spec->pin_cvt, nid);
+	if (i < 0)
+		return 0;
+	eld = &spec->sink_eld[i];
+
+	/*
+	 * HDMI sink's ELD info cannot always be retrieved for now, e.g.
+	 * in console or for audio devices. Assume the highest speakers
+	 * configuration, to _not_ prohibit multi-channel audio playback.
+	 */
+	if (!eld->spk_alloc)
+		eld->spk_alloc = 0xffff;
+
+	/*
+	 * expand ELD's speaker allocation mask
+	 *
+	 * ELD tells the speaker mask in a compact(paired) form,
+	 * expand ELD's notions to match the ones used by Audio InfoFrame.
+	 */
+	for (i = 0; i < ARRAY_SIZE(eld_speaker_allocation_bits); i++) {
+		if (eld->spk_alloc & (1 << i))
+			spk_mask |= eld_speaker_allocation_bits[i];
+	}
+
+	/* search for the first working match in the CA table */
+	for (i = 0; i < ARRAY_SIZE(channel_allocations); i++) {
+		if (channels == channel_allocations[i].channels &&
+		    (spk_mask & channel_allocations[i].spk_mask) ==
+				channel_allocations[i].spk_mask) {
+			ai->CA = channel_allocations[i].ca_index;
+			break;
+		}
+	}
+
+	snd_print_channel_allocation(eld->spk_alloc, buf, sizeof(buf));
+	snd_printdd("HDMI: select CA 0x%x for %d-channel allocation: %s\n",
+		    ai->CA, channels, buf);
+
+	return ai->CA;
+}
+
+static void hdmi_debug_channel_mapping(struct hda_codec *codec,
+				       hda_nid_t pin_nid)
+{
+#ifdef CONFIG_SND_DEBUG_VERBOSE
+	int i;
+	int slot;
+
+	for (i = 0; i < 8; i++) {
+		slot = snd_hda_codec_read(codec, pin_nid, 0,
+						AC_VERB_GET_HDMI_CHAN_SLOT, i);
+		printk(KERN_DEBUG "HDMI: ASP channel %d => slot %d\n",
+						slot >> 4, slot & 0xf);
+	}
+#endif
+}
+
+
+static void hdmi_setup_channel_mapping(struct hda_codec *codec,
+				       hda_nid_t pin_nid,
+				       struct hdmi_audio_infoframe *ai)
+{
+	int i;
+	int ca = ai->CA;
+	int err;
+
+	if (hdmi_channel_mapping[ca][1] == 0) {
+		for (i = 0; i < channel_allocations[ca].channels; i++)
+			hdmi_channel_mapping[ca][i] = i | (i << 4);
+		for (; i < 8; i++)
+			hdmi_channel_mapping[ca][i] = 0xf | (i << 4);
+	}
+
+	for (i = 0; i < 8; i++) {
+		err = snd_hda_codec_write(codec, pin_nid, 0,
+					  AC_VERB_SET_HDMI_CHAN_SLOT,
+					  hdmi_channel_mapping[ca][i]);
+		if (err) {
+			snd_printdd(KERN_NOTICE
+				    "HDMI: channel mapping failed\n");
+			break;
+		}
+	}
+
+	hdmi_debug_channel_mapping(codec, pin_nid);
+}
+
+
+/*
+ * Audio InfoFrame routines
+ */
+
+/*
+ * Enable Audio InfoFrame Transmission
+ */
+static void hdmi_start_infoframe_trans(struct hda_codec *codec,
+				       hda_nid_t pin_nid)
+{
+	hdmi_set_dip_index(codec, pin_nid, 0x0, 0x0);
+	snd_hda_codec_write(codec, pin_nid, 0, AC_VERB_SET_HDMI_DIP_XMIT,
+						AC_DIPXMIT_BEST);
+}
+
+/*
+ * Disable Audio InfoFrame Transmission
+ */
+static void hdmi_stop_infoframe_trans(struct hda_codec *codec,
+				      hda_nid_t pin_nid)
+{
+	hdmi_set_dip_index(codec, pin_nid, 0x0, 0x0);
+	snd_hda_codec_write(codec, pin_nid, 0, AC_VERB_SET_HDMI_DIP_XMIT,
+						AC_DIPXMIT_DISABLE);
+}
+
+static void hdmi_debug_dip_size(struct hda_codec *codec, hda_nid_t pin_nid)
+{
+#ifdef CONFIG_SND_DEBUG_VERBOSE
+	int i;
+	int size;
+
+	size = snd_hdmi_get_eld_size(codec, pin_nid);
+	printk(KERN_DEBUG "HDMI: ELD buf size is %d\n", size);
+
+	for (i = 0; i < 8; i++) {
+		size = snd_hda_codec_read(codec, pin_nid, 0,
+						AC_VERB_GET_HDMI_DIP_SIZE, i);
+		printk(KERN_DEBUG "HDMI: DIP GP[%d] buf size is %d\n", i, size);
+	}
+#endif
+}
+
+static void hdmi_clear_dip_buffers(struct hda_codec *codec, hda_nid_t pin_nid)
+{
+#ifdef BE_PARANOID
+	int i, j;
+	int size;
+	int pi, bi;
+	for (i = 0; i < 8; i++) {
+		size = snd_hda_codec_read(codec, pin_nid, 0,
+						AC_VERB_GET_HDMI_DIP_SIZE, i);
+		if (size == 0)
+			continue;
+
+		hdmi_set_dip_index(codec, pin_nid, i, 0x0);
+		for (j = 1; j < 1000; j++) {
+			hdmi_write_dip_byte(codec, pin_nid, 0x0);
+			hdmi_get_dip_index(codec, pin_nid, &pi, &bi);
+			if (pi != i)
+				snd_printd(KERN_INFO "dip index %d: %d != %d\n",
+						bi, pi, i);
+			if (bi == 0) /* byte index wrapped around */
+				break;
+		}
+		snd_printd(KERN_INFO
+			"HDMI: DIP GP[%d] buf reported size=%d, written=%d\n",
+			i, size, j);
+	}
+#endif
+}
+
+static void hdmi_checksum_audio_infoframe(struct hdmi_audio_infoframe *ai)
+{
+	u8 *bytes = (u8 *)ai;
+	u8 sum = 0;
+	int i;
+
+	ai->checksum = 0;
+
+	for (i = 0; i < sizeof(*ai); i++)
+		sum += bytes[i];
+
+	ai->checksum = -sum;
+}
+
+static void hdmi_fill_audio_infoframe(struct hda_codec *codec,
+				      hda_nid_t pin_nid,
+				      struct hdmi_audio_infoframe *ai)
+{
+	u8 *bytes = (u8 *)ai;
+	int i;
+
+	hdmi_debug_dip_size(codec, pin_nid);
+	hdmi_clear_dip_buffers(codec, pin_nid); /* be paranoid */
+
+	hdmi_checksum_audio_infoframe(ai);
+
+	hdmi_set_dip_index(codec, pin_nid, 0x0, 0x0);
+	for (i = 0; i < sizeof(*ai); i++)
+		hdmi_write_dip_byte(codec, pin_nid, bytes[i]);
+}
+
+static bool hdmi_infoframe_uptodate(struct hda_codec *codec, hda_nid_t pin_nid,
+				    struct hdmi_audio_infoframe *ai)
+{
+	u8 *bytes = (u8 *)ai;
+	u8 val;
+	int i;
+
+	if (snd_hda_codec_read(codec, pin_nid, 0, AC_VERB_GET_HDMI_DIP_XMIT, 0)
+							    != AC_DIPXMIT_BEST)
+		return false;
+
+	hdmi_set_dip_index(codec, pin_nid, 0x0, 0x0);
+	for (i = 0; i < sizeof(*ai); i++) {
+		val = snd_hda_codec_read(codec, pin_nid, 0,
+					 AC_VERB_GET_HDMI_DIP_DATA, 0);
+		if (val != bytes[i])
+			return false;
+	}
+
+	return true;
+}
+
+static void hdmi_setup_audio_infoframe(struct hda_codec *codec, hda_nid_t nid,
+					struct snd_pcm_substream *substream)
+{
+	struct hdmi_spec *spec = codec->spec;
+	hda_nid_t pin_nid;
+	int i;
+	struct hdmi_audio_infoframe ai = {
+		.type		= 0x84,
+		.ver		= 0x01,
+		.len		= 0x0a,
+		.CC02_CT47	= substream->runtime->channels - 1,
+	};
+
+	hdmi_setup_channel_allocation(codec, nid, &ai);
+
+	for (i = 0; i < spec->num_pins; i++) {
+		if (spec->pin_cvt[i] != nid)
+			continue;
+		if (!spec->sink_eld[i].monitor_present)
+			continue;
+
+		pin_nid = spec->pin[i];
+		if (!hdmi_infoframe_uptodate(codec, pin_nid, &ai)) {
+			snd_printdd("hdmi_setup_audio_infoframe: "
+				    "cvt=%d pin=%d channels=%d\n",
+				    nid, pin_nid,
+				    substream->runtime->channels);
+			hdmi_setup_channel_mapping(codec, pin_nid, &ai);
+			hdmi_stop_infoframe_trans(codec, pin_nid);
+			hdmi_fill_audio_infoframe(codec, pin_nid, &ai);
+			hdmi_start_infoframe_trans(codec, pin_nid);
+		}
+	}
+}
+
+
+/*
+ * Unsolicited events
+ */
+
+static void hdmi_intrinsic_event(struct hda_codec *codec, unsigned int res)
+{
+	struct hdmi_spec *spec = codec->spec;
+	int tag = res >> AC_UNSOL_RES_TAG_SHIFT;
+	int pind = !!(res & AC_UNSOL_RES_PD);
+	int eldv = !!(res & AC_UNSOL_RES_ELDV);
+	int index;
+
+	printk(KERN_INFO
+		"HDMI hot plug event: Pin=%d Presence_Detect=%d ELD_Valid=%d\n",
+		tag, pind, eldv);
+
+	index = hda_node_index(spec->pin, tag);
+	if (index < 0)
+		return;
+
+	spec->sink_eld[index].monitor_present = pind;
+	spec->sink_eld[index].eld_valid = eldv;
+
+	if (pind && eldv) {
+		hdmi_get_show_eld(codec, spec->pin[index],
+				  &spec->sink_eld[index]);
+		/* TODO: do real things about ELD */
+	}
+}
+
+static void hdmi_non_intrinsic_event(struct hda_codec *codec, unsigned int res)
+{
+	int tag = res >> AC_UNSOL_RES_TAG_SHIFT;
+	int subtag = (res & AC_UNSOL_RES_SUBTAG) >> AC_UNSOL_RES_SUBTAG_SHIFT;
+	int cp_state = !!(res & AC_UNSOL_RES_CP_STATE);
+	int cp_ready = !!(res & AC_UNSOL_RES_CP_READY);
+
+	printk(KERN_INFO
+		"HDMI CP event: PIN=%d SUBTAG=0x%x CP_STATE=%d CP_READY=%d\n",
+		tag,
+		subtag,
+		cp_state,
+		cp_ready);
+
+	/* TODO */
+	if (cp_state)
+		;
+	if (cp_ready)
+		;
+}
+
+
+static void hdmi_unsol_event(struct hda_codec *codec, unsigned int res)
+{
+	struct hdmi_spec *spec = codec->spec;
+	int tag = res >> AC_UNSOL_RES_TAG_SHIFT;
+	int subtag = (res & AC_UNSOL_RES_SUBTAG) >> AC_UNSOL_RES_SUBTAG_SHIFT;
+
+	if (hda_node_index(spec->pin, tag) < 0) {
+		snd_printd(KERN_INFO "Unexpected HDMI event tag 0x%x\n", tag);
+		return;
+	}
+
+	if (subtag == 0)
+		hdmi_intrinsic_event(codec, res);
+	else
+		hdmi_non_intrinsic_event(codec, res);
+}
+
+/*
+ * Callbacks
+ */
+
+static void hdmi_setup_stream(struct hda_codec *codec, hda_nid_t nid,
+			      u32 stream_tag, int format)
+{
+	int tag;
+	int fmt;
+
+	tag = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_CONV, 0) >> 4;
+	fmt = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_STREAM_FORMAT, 0);
+
+	snd_printdd("hdmi_setup_stream: "
+		    "NID=0x%x, %sstream=0x%x, %sformat=0x%x\n",
+		    nid,
+		    tag == stream_tag ? "" : "new-",
+		    stream_tag,
+		    fmt == format ? "" : "new-",
+		    format);
+
+	if (tag != stream_tag)
+		snd_hda_codec_write(codec, nid, 0,
+				    AC_VERB_SET_CHANNEL_STREAMID,
+				    stream_tag << 4);
+	if (fmt != format)
+		snd_hda_codec_write(codec, nid, 0,
+				    AC_VERB_SET_STREAM_FORMAT, format);
+}
+
+/*
+ * HDA/HDMI auto parsing
+ */
+
+static int hdmi_read_pin_conn(struct hda_codec *codec, hda_nid_t pin_nid)
+{
+	struct hdmi_spec *spec = codec->spec;
+	hda_nid_t conn_list[HDA_MAX_CONNECTIONS];
+	int conn_len, curr;
+	int index;
+
+	if (!(get_wcaps(codec, pin_nid) & AC_WCAP_CONN_LIST)) {
+		snd_printk(KERN_WARNING
+			   "HDMI: pin %d wcaps %#x "
+			   "does not support connection list\n",
+			   pin_nid, get_wcaps(codec, pin_nid));
+		return -EINVAL;
+	}
+
+	conn_len = snd_hda_get_connections(codec, pin_nid, conn_list,
+					   HDA_MAX_CONNECTIONS);
+	if (conn_len > 1)
+		curr = snd_hda_codec_read(codec, pin_nid, 0,
+					  AC_VERB_GET_CONNECT_SEL, 0);
+	else
+		curr = 0;
+
+	index = hda_node_index(spec->pin, pin_nid);
+	if (index < 0)
+		return -EINVAL;
+
+	spec->pin_cvt[index] = conn_list[curr];
+
+	return 0;
+}
+
+static void hdmi_present_sense(struct hda_codec *codec, hda_nid_t pin_nid,
+			       struct hdmi_eld *eld)
+{
+	int present = snd_hda_pin_sense(codec, pin_nid);
+
+	eld->monitor_present	= !!(present & AC_PINSENSE_PRESENCE);
+	eld->eld_valid		= !!(present & AC_PINSENSE_ELDV);
+
+	if (present & AC_PINSENSE_ELDV)
+		hdmi_get_show_eld(codec, pin_nid, eld);
+}
+
+static int hdmi_add_pin(struct hda_codec *codec, hda_nid_t pin_nid)
+{
+	struct hdmi_spec *spec = codec->spec;
+
+	if (spec->num_pins >= MAX_HDMI_PINS) {
+		snd_printk(KERN_WARNING
+			   "HDMI: no space for pin %d\n", pin_nid);
+		return -EINVAL;
+	}
+
+	hdmi_present_sense(codec, pin_nid, &spec->sink_eld[spec->num_pins]);
+
+	spec->pin[spec->num_pins] = pin_nid;
+	spec->num_pins++;
+
+	/*
+	 * It is assumed that converter nodes come first in the node list and
+	 * hence have been registered and usable now.
+	 */
+	return hdmi_read_pin_conn(codec, pin_nid);
+}
+
+static int hdmi_add_cvt(struct hda_codec *codec, hda_nid_t nid)
+{
+	struct hdmi_spec *spec = codec->spec;
+
+	if (spec->num_cvts >= MAX_HDMI_CVTS) {
+		snd_printk(KERN_WARNING
+			   "HDMI: no space for converter %d\n", nid);
+		return -EINVAL;
+	}
+
+	spec->cvt[spec->num_cvts] = nid;
+	spec->num_cvts++;
+
+	return 0;
+}
+
+static int hdmi_parse_codec(struct hda_codec *codec)
+{
+	hda_nid_t nid;
+	int i, nodes;
+
+	nodes = snd_hda_get_sub_nodes(codec, codec->afg, &nid);
+	if (!nid || nodes < 0) {
+		snd_printk(KERN_WARNING "HDMI: failed to get afg sub nodes\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < nodes; i++, nid++) {
+		unsigned int caps;
+		unsigned int type;
+
+		caps = snd_hda_param_read(codec, nid, AC_PAR_AUDIO_WIDGET_CAP);
+		type = get_wcaps_type(caps);
+
+		if (!(caps & AC_WCAP_DIGITAL))
+			continue;
+
+		switch (type) {
+		case AC_WID_AUD_OUT:
+			if (hdmi_add_cvt(codec, nid) < 0)
+				return -EINVAL;
+			break;
+		case AC_WID_PIN:
+			caps = snd_hda_param_read(codec, nid, AC_PAR_PIN_CAP);
+			if (!(caps & (AC_PINCAP_HDMI | AC_PINCAP_DP)))
+				continue;
+			if (hdmi_add_pin(codec, nid) < 0)
+				return -EINVAL;
+			break;
+		}
+	}
+
+	/*
+	 * G45/IbexPeak don't support EPSS: the unsolicited pin hot plug event
+	 * can be lost and presence sense verb will become inaccurate if the
+	 * HDA link is powered off at hot plug or hw initialization time.
+	 */
+#ifdef CONFIG_SND_HDA_POWER_SAVE
+	if (!(snd_hda_param_read(codec, codec->afg, AC_PAR_POWER_STATE) &
+	      AC_PWRST_EPSS))
+		codec->bus->power_keep_link_on = 1;
+#endif
+
+	return 0;
+}
+
diff --git a/sound/pci/hda/patch_intelhdmi.c b/sound/pci/hda/patch_intelhdmi.c
index 918f40378d52..88d035104cc5 100644
--- a/sound/pci/hda/patch_intelhdmi.c
+++ b/sound/pci/hda/patch_intelhdmi.c
@@ -40,815 +40,20 @@
  *
  * The HDA correspondence of pipes/ports are converter/pin nodes.
  */
-#define INTEL_HDMI_CVTS	2
-#define INTEL_HDMI_PINS	3
+#define MAX_HDMI_CVTS	2
+#define MAX_HDMI_PINS	3
 
-static char *intel_hdmi_pcm_names[INTEL_HDMI_CVTS] = {
+#include "patch_hdmi.c"
+
+static char *intel_hdmi_pcm_names[MAX_HDMI_CVTS] = {
 	"INTEL HDMI 0",
 	"INTEL HDMI 1",
 };
 
-struct intel_hdmi_spec {
-	int num_cvts;
-	int num_pins;
-	hda_nid_t cvt[INTEL_HDMI_CVTS+1];  /* audio sources */
-	hda_nid_t pin[INTEL_HDMI_PINS+1];  /* audio sinks */
-
-	/*
-	 * source connection for each pin
-	 */
-	hda_nid_t pin_cvt[INTEL_HDMI_PINS+1];
-
-	/*
-	 * HDMI sink attached to each pin
-	 */
-	struct hdmi_eld sink_eld[INTEL_HDMI_PINS];
-
-	/*
-	 * export one pcm per pipe
-	 */
-	struct hda_pcm	pcm_rec[INTEL_HDMI_CVTS];
-};
-
-struct hdmi_audio_infoframe {
-	u8 type; /* 0x84 */
-	u8 ver;  /* 0x01 */
-	u8 len;  /* 0x0a */
-
-	u8 checksum;	/* PB0 */
-	u8 CC02_CT47;	/* CC in bits 0:2, CT in 4:7 */
-	u8 SS01_SF24;
-	u8 CXT04;
-	u8 CA;
-	u8 LFEPBL01_LSV36_DM_INH7;
-	u8 reserved[5];	/* PB6 - PB10 */
-};
-
-/*
- * CEA speaker placement:
- *
- *        FLH       FCH        FRH
- *  FLW    FL  FLC   FC   FRC   FR   FRW
- *
- *                                  LFE
- *                     TC
- *
- *          RL  RLC   RC   RRC   RR
- *
- * The Left/Right Surround channel _notions_ LS/RS in SMPTE 320M corresponds to
- * CEA RL/RR; The SMPTE channel _assignment_ C/LFE is swapped to CEA LFE/FC.
- */
-enum cea_speaker_placement {
-	FL  = (1 <<  0),	/* Front Left           */
-	FC  = (1 <<  1),	/* Front Center         */
-	FR  = (1 <<  2),	/* Front Right          */
-	FLC = (1 <<  3),	/* Front Left Center    */
-	FRC = (1 <<  4),	/* Front Right Center   */
-	RL  = (1 <<  5),	/* Rear Left            */
-	RC  = (1 <<  6),	/* Rear Center          */
-	RR  = (1 <<  7),	/* Rear Right           */
-	RLC = (1 <<  8),	/* Rear Left Center     */
-	RRC = (1 <<  9),	/* Rear Right Center    */
-	LFE = (1 << 10),	/* Low Frequency Effect */
-	FLW = (1 << 11),	/* Front Left Wide      */
-	FRW = (1 << 12),	/* Front Right Wide     */
-	FLH = (1 << 13),	/* Front Left High      */
-	FCH = (1 << 14),	/* Front Center High    */
-	FRH = (1 << 15),	/* Front Right High     */
-	TC  = (1 << 16),	/* Top Center           */
-};
-
-/*
- * ELD SA bits in the CEA Speaker Allocation data block
- */
-static int eld_speaker_allocation_bits[] = {
-	[0] = FL | FR,
-	[1] = LFE,
-	[2] = FC,
-	[3] = RL | RR,
-	[4] = RC,
-	[5] = FLC | FRC,
-	[6] = RLC | RRC,
-	/* the following are not defined in ELD yet */
-	[7] = FLW | FRW,
-	[8] = FLH | FRH,
-	[9] = TC,
-	[10] = FCH,
-};
-
-struct cea_channel_speaker_allocation {
-	int ca_index;
-	int speakers[8];
-
-	/* derived values, just for convenience */
-	int channels;
-	int spk_mask;
-};
-
-/*
- * ALSA sequence is:
- *
- *       surround40   surround41   surround50   surround51   surround71
- * ch0   front left   =            =            =            =
- * ch1   front right  =            =            =            =
- * ch2   rear left    =            =            =            =
- * ch3   rear right   =            =            =            =
- * ch4                LFE          center       center       center
- * ch5                                          LFE          LFE
- * ch6                                                       side left
- * ch7                                                       side right
- *
- * surround71 = {FL, FR, RLC, RRC, FC, LFE, RL, RR}
- */
-static int hdmi_channel_mapping[0x32][8] = {
-	/* stereo */
-	[0x00] = { 0x00, 0x11, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7 },
-	/* 2.1 */
-	[0x01] = { 0x00, 0x11, 0x22, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7 },
-	/* Dolby Surround */
-	[0x02] = { 0x00, 0x11, 0x23, 0xf2, 0xf4, 0xf5, 0xf6, 0xf7 },
-	/* surround40 */
-	[0x08] = { 0x00, 0x11, 0x24, 0x35, 0xf3, 0xf2, 0xf6, 0xf7 },
-	/* 4ch */
-	[0x03] = { 0x00, 0x11, 0x23, 0x32, 0x44, 0xf5, 0xf6, 0xf7 },
-	/* surround41 */
-	[0x09] = { 0x00, 0x11, 0x24, 0x34, 0x43, 0xf2, 0xf6, 0xf7 },
-	/* surround50 */
-	[0x0a] = { 0x00, 0x11, 0x24, 0x35, 0x43, 0xf2, 0xf6, 0xf7 },
-	/* surround51 */
-	[0x0b] = { 0x00, 0x11, 0x24, 0x35, 0x43, 0x52, 0xf6, 0xf7 },
-	/* 7.1 */
-	[0x13] = { 0x00, 0x11, 0x26, 0x37, 0x43, 0x52, 0x64, 0x75 },
-};
-
-/*
- * This is an ordered list!
- *
- * The preceding ones have better chances to be selected by
- * hdmi_setup_channel_allocation().
- */
-static struct cea_channel_speaker_allocation channel_allocations[] = {
-/* 			  channel:   7     6    5    4    3     2    1    0  */
-{ .ca_index = 0x00,  .speakers = {   0,    0,   0,   0,   0,    0,  FR,  FL } },
-				 /* 2.1 */
-{ .ca_index = 0x01,  .speakers = {   0,    0,   0,   0,   0,  LFE,  FR,  FL } },
-				 /* Dolby Surround */
-{ .ca_index = 0x02,  .speakers = {   0,    0,   0,   0,  FC,    0,  FR,  FL } },
-				 /* surround40 */
-{ .ca_index = 0x08,  .speakers = {   0,    0,  RR,  RL,   0,    0,  FR,  FL } },
-				 /* surround41 */
-{ .ca_index = 0x09,  .speakers = {   0,    0,  RR,  RL,   0,  LFE,  FR,  FL } },
-				 /* surround50 */
-{ .ca_index = 0x0a,  .speakers = {   0,    0,  RR,  RL,  FC,    0,  FR,  FL } },
-				 /* surround51 */
-{ .ca_index = 0x0b,  .speakers = {   0,    0,  RR,  RL,  FC,  LFE,  FR,  FL } },
-				 /* 6.1 */
-{ .ca_index = 0x0f,  .speakers = {   0,   RC,  RR,  RL,  FC,  LFE,  FR,  FL } },
-				 /* surround71 */
-{ .ca_index = 0x13,  .speakers = { RRC,  RLC,  RR,  RL,  FC,  LFE,  FR,  FL } },
-
-{ .ca_index = 0x03,  .speakers = {   0,    0,   0,   0,  FC,  LFE,  FR,  FL } },
-{ .ca_index = 0x04,  .speakers = {   0,    0,   0,  RC,   0,    0,  FR,  FL } },
-{ .ca_index = 0x05,  .speakers = {   0,    0,   0,  RC,   0,  LFE,  FR,  FL } },
-{ .ca_index = 0x06,  .speakers = {   0,    0,   0,  RC,  FC,    0,  FR,  FL } },
-{ .ca_index = 0x07,  .speakers = {   0,    0,   0,  RC,  FC,  LFE,  FR,  FL } },
-{ .ca_index = 0x0c,  .speakers = {   0,   RC,  RR,  RL,   0,    0,  FR,  FL } },
-{ .ca_index = 0x0d,  .speakers = {   0,   RC,  RR,  RL,   0,  LFE,  FR,  FL } },
-{ .ca_index = 0x0e,  .speakers = {   0,   RC,  RR,  RL,  FC,    0,  FR,  FL } },
-{ .ca_index = 0x10,  .speakers = { RRC,  RLC,  RR,  RL,   0,    0,  FR,  FL } },
-{ .ca_index = 0x11,  .speakers = { RRC,  RLC,  RR,  RL,   0,  LFE,  FR,  FL } },
-{ .ca_index = 0x12,  .speakers = { RRC,  RLC,  RR,  RL,  FC,    0,  FR,  FL } },
-{ .ca_index = 0x14,  .speakers = { FRC,  FLC,   0,   0,   0,    0,  FR,  FL } },
-{ .ca_index = 0x15,  .speakers = { FRC,  FLC,   0,   0,   0,  LFE,  FR,  FL } },
-{ .ca_index = 0x16,  .speakers = { FRC,  FLC,   0,   0,  FC,    0,  FR,  FL } },
-{ .ca_index = 0x17,  .speakers = { FRC,  FLC,   0,   0,  FC,  LFE,  FR,  FL } },
-{ .ca_index = 0x18,  .speakers = { FRC,  FLC,   0,  RC,   0,    0,  FR,  FL } },
-{ .ca_index = 0x19,  .speakers = { FRC,  FLC,   0,  RC,   0,  LFE,  FR,  FL } },
-{ .ca_index = 0x1a,  .speakers = { FRC,  FLC,   0,  RC,  FC,    0,  FR,  FL } },
-{ .ca_index = 0x1b,  .speakers = { FRC,  FLC,   0,  RC,  FC,  LFE,  FR,  FL } },
-{ .ca_index = 0x1c,  .speakers = { FRC,  FLC,  RR,  RL,   0,    0,  FR,  FL } },
-{ .ca_index = 0x1d,  .speakers = { FRC,  FLC,  RR,  RL,   0,  LFE,  FR,  FL } },
-{ .ca_index = 0x1e,  .speakers = { FRC,  FLC,  RR,  RL,  FC,    0,  FR,  FL } },
-{ .ca_index = 0x1f,  .speakers = { FRC,  FLC,  RR,  RL,  FC,  LFE,  FR,  FL } },
-{ .ca_index = 0x20,  .speakers = {   0,  FCH,  RR,  RL,  FC,    0,  FR,  FL } },
-{ .ca_index = 0x21,  .speakers = {   0,  FCH,  RR,  RL,  FC,  LFE,  FR,  FL } },
-{ .ca_index = 0x22,  .speakers = {  TC,    0,  RR,  RL,  FC,    0,  FR,  FL } },
-{ .ca_index = 0x23,  .speakers = {  TC,    0,  RR,  RL,  FC,  LFE,  FR,  FL } },
-{ .ca_index = 0x24,  .speakers = { FRH,  FLH,  RR,  RL,   0,    0,  FR,  FL } },
-{ .ca_index = 0x25,  .speakers = { FRH,  FLH,  RR,  RL,   0,  LFE,  FR,  FL } },
-{ .ca_index = 0x26,  .speakers = { FRW,  FLW,  RR,  RL,   0,    0,  FR,  FL } },
-{ .ca_index = 0x27,  .speakers = { FRW,  FLW,  RR,  RL,   0,  LFE,  FR,  FL } },
-{ .ca_index = 0x28,  .speakers = {  TC,   RC,  RR,  RL,  FC,    0,  FR,  FL } },
-{ .ca_index = 0x29,  .speakers = {  TC,   RC,  RR,  RL,  FC,  LFE,  FR,  FL } },
-{ .ca_index = 0x2a,  .speakers = { FCH,   RC,  RR,  RL,  FC,    0,  FR,  FL } },
-{ .ca_index = 0x2b,  .speakers = { FCH,   RC,  RR,  RL,  FC,  LFE,  FR,  FL } },
-{ .ca_index = 0x2c,  .speakers = {  TC,  FCH,  RR,  RL,  FC,    0,  FR,  FL } },
-{ .ca_index = 0x2d,  .speakers = {  TC,  FCH,  RR,  RL,  FC,  LFE,  FR,  FL } },
-{ .ca_index = 0x2e,  .speakers = { FRH,  FLH,  RR,  RL,  FC,    0,  FR,  FL } },
-{ .ca_index = 0x2f,  .speakers = { FRH,  FLH,  RR,  RL,  FC,  LFE,  FR,  FL } },
-{ .ca_index = 0x30,  .speakers = { FRW,  FLW,  RR,  RL,  FC,    0,  FR,  FL } },
-{ .ca_index = 0x31,  .speakers = { FRW,  FLW,  RR,  RL,  FC,  LFE,  FR,  FL } },
-};
-
-/*
- * HDA/HDMI auto parsing
- */
-
-static int hda_node_index(hda_nid_t *nids, hda_nid_t nid)
-{
-	int i;
-
-	for (i = 0; nids[i]; i++)
-		if (nids[i] == nid)
-			return i;
-
-	snd_printk(KERN_WARNING "HDMI: nid %d not registered\n", nid);
-	return -EINVAL;
-}
-
-static int intel_hdmi_read_pin_conn(struct hda_codec *codec, hda_nid_t pin_nid)
-{
-	struct intel_hdmi_spec *spec = codec->spec;
-	hda_nid_t conn_list[HDA_MAX_CONNECTIONS];
-	int conn_len, curr;
-	int index;
-
-	if (!(get_wcaps(codec, pin_nid) & AC_WCAP_CONN_LIST)) {
-		snd_printk(KERN_WARNING
-			   "HDMI: pin %d wcaps %#x "
-			   "does not support connection list\n",
-			   pin_nid, get_wcaps(codec, pin_nid));
-		return -EINVAL;
-	}
-
-	conn_len = snd_hda_get_connections(codec, pin_nid, conn_list,
-					   HDA_MAX_CONNECTIONS);
-	if (conn_len > 1)
-		curr = snd_hda_codec_read(codec, pin_nid, 0,
-					  AC_VERB_GET_CONNECT_SEL, 0);
-	else
-		curr = 0;
-
-	index = hda_node_index(spec->pin, pin_nid);
-	if (index < 0)
-		return -EINVAL;
-
-	spec->pin_cvt[index] = conn_list[curr];
-
-	return 0;
-}
-
-static void hdmi_get_show_eld(struct hda_codec *codec, hda_nid_t pin_nid,
-			      struct hdmi_eld *eld)
-{
-	if (!snd_hdmi_get_eld(eld, codec, pin_nid))
-		snd_hdmi_show_eld(eld);
-}
-
-static void hdmi_present_sense(struct hda_codec *codec, hda_nid_t pin_nid,
-			       struct hdmi_eld *eld)
-{
-	int present = snd_hda_pin_sense(codec, pin_nid);
-
-	eld->monitor_present	= !!(present & AC_PINSENSE_PRESENCE);
-	eld->eld_valid		= !!(present & AC_PINSENSE_ELDV);
-
-	if (present & AC_PINSENSE_ELDV)
-		hdmi_get_show_eld(codec, pin_nid, eld);
-}
-
-static int intel_hdmi_add_pin(struct hda_codec *codec, hda_nid_t pin_nid)
-{
-	struct intel_hdmi_spec *spec = codec->spec;
-
-	if (spec->num_pins >= INTEL_HDMI_PINS) {
-		snd_printk(KERN_WARNING
-			   "HDMI: no space for pin %d \n", pin_nid);
-		return -EINVAL;
-	}
-
-	hdmi_present_sense(codec, pin_nid, &spec->sink_eld[spec->num_pins]);
-
-	spec->pin[spec->num_pins] = pin_nid;
-	spec->num_pins++;
-
-	/*
-	 * It is assumed that converter nodes come first in the node list and
-	 * hence have been registered and usable now.
-	 */
-	return intel_hdmi_read_pin_conn(codec, pin_nid);
-}
-
-static int intel_hdmi_add_cvt(struct hda_codec *codec, hda_nid_t nid)
-{
-	struct intel_hdmi_spec *spec = codec->spec;
-
-	if (spec->num_cvts >= INTEL_HDMI_CVTS) {
-		snd_printk(KERN_WARNING
-			   "HDMI: no space for converter %d \n", nid);
-		return -EINVAL;
-	}
-
-	spec->cvt[spec->num_cvts] = nid;
-	spec->num_cvts++;
-
-	return 0;
-}
-
-static int intel_hdmi_parse_codec(struct hda_codec *codec)
-{
-	hda_nid_t nid;
-	int i, nodes;
-
-	nodes = snd_hda_get_sub_nodes(codec, codec->afg, &nid);
-	if (!nid || nodes < 0) {
-		snd_printk(KERN_WARNING "HDMI: failed to get afg sub nodes\n");
-		return -EINVAL;
-	}
-
-	for (i = 0; i < nodes; i++, nid++) {
-		unsigned int caps;
-		unsigned int type;
-
-		caps = snd_hda_param_read(codec, nid, AC_PAR_AUDIO_WIDGET_CAP);
-		type = get_wcaps_type(caps);
-
-		if (!(caps & AC_WCAP_DIGITAL))
-			continue;
-
-		switch (type) {
-		case AC_WID_AUD_OUT:
-			if (intel_hdmi_add_cvt(codec, nid) < 0)
-				return -EINVAL;
-			break;
-		case AC_WID_PIN:
-			caps = snd_hda_param_read(codec, nid, AC_PAR_PIN_CAP);
-			if (!(caps & (AC_PINCAP_HDMI | AC_PINCAP_DP)))
-				continue;
-			if (intel_hdmi_add_pin(codec, nid) < 0)
-				return -EINVAL;
-			break;
-		}
-	}
-
-	/*
-	 * G45/IbexPeak don't support EPSS: the unsolicited pin hot plug event
-	 * can be lost and presence sense verb will become inaccurate if the
-	 * HDA link is powered off at hot plug or hw initialization time.
-	 */
-#ifdef CONFIG_SND_HDA_POWER_SAVE
-	if (!(snd_hda_param_read(codec, codec->afg, AC_PAR_POWER_STATE) &
-	      AC_PWRST_EPSS))
-		codec->bus->power_keep_link_on = 1;
-#endif
-
-	return 0;
-}
-
-/*
- * HDMI routines
- */
-
-#ifdef BE_PARANOID
-static void hdmi_get_dip_index(struct hda_codec *codec, hda_nid_t pin_nid,
-				int *packet_index, int *byte_index)
-{
-	int val;
-
-	val = snd_hda_codec_read(codec, pin_nid, 0,
-				 AC_VERB_GET_HDMI_DIP_INDEX, 0);
-
-	*packet_index = val >> 5;
-	*byte_index = val & 0x1f;
-}
-#endif
-
-static void hdmi_set_dip_index(struct hda_codec *codec, hda_nid_t pin_nid,
-				int packet_index, int byte_index)
-{
-	int val;
-
-	val = (packet_index << 5) | (byte_index & 0x1f);
-
-	snd_hda_codec_write(codec, pin_nid, 0, AC_VERB_SET_HDMI_DIP_INDEX, val);
-}
-
-static void hdmi_write_dip_byte(struct hda_codec *codec, hda_nid_t pin_nid,
-				unsigned char val)
-{
-	snd_hda_codec_write(codec, pin_nid, 0, AC_VERB_SET_HDMI_DIP_DATA, val);
-}
-
-static void hdmi_enable_output(struct hda_codec *codec, hda_nid_t pin_nid)
-{
-	/* Unmute */
-	if (get_wcaps(codec, pin_nid) & AC_WCAP_OUT_AMP)
-		snd_hda_codec_write(codec, pin_nid, 0,
-				AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE);
-	/* Enable pin out */
-	snd_hda_codec_write(codec, pin_nid, 0,
-			    AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT);
-}
-
-/*
- * Enable Audio InfoFrame Transmission
- */
-static void hdmi_start_infoframe_trans(struct hda_codec *codec,
-				       hda_nid_t pin_nid)
-{
-	hdmi_set_dip_index(codec, pin_nid, 0x0, 0x0);
-	snd_hda_codec_write(codec, pin_nid, 0, AC_VERB_SET_HDMI_DIP_XMIT,
-						AC_DIPXMIT_BEST);
-}
-
-/*
- * Disable Audio InfoFrame Transmission
- */
-static void hdmi_stop_infoframe_trans(struct hda_codec *codec,
-				      hda_nid_t pin_nid)
-{
-	hdmi_set_dip_index(codec, pin_nid, 0x0, 0x0);
-	snd_hda_codec_write(codec, pin_nid, 0, AC_VERB_SET_HDMI_DIP_XMIT,
-						AC_DIPXMIT_DISABLE);
-}
-
-static int hdmi_get_channel_count(struct hda_codec *codec, hda_nid_t nid)
-{
-	return 1 + snd_hda_codec_read(codec, nid, 0,
-					AC_VERB_GET_CVT_CHAN_COUNT, 0);
-}
-
-static void hdmi_set_channel_count(struct hda_codec *codec,
-				   hda_nid_t nid, int chs)
-{
-	if (chs != hdmi_get_channel_count(codec, nid))
-		snd_hda_codec_write(codec, nid, 0,
-				    AC_VERB_SET_CVT_CHAN_COUNT, chs - 1);
-}
-
-static void hdmi_debug_channel_mapping(struct hda_codec *codec,
-				       hda_nid_t pin_nid)
-{
-#ifdef CONFIG_SND_DEBUG_VERBOSE
-	int i;
-	int slot;
-
-	for (i = 0; i < 8; i++) {
-		slot = snd_hda_codec_read(codec, pin_nid, 0,
-						AC_VERB_GET_HDMI_CHAN_SLOT, i);
-		printk(KERN_DEBUG "HDMI: ASP channel %d => slot %d\n",
-						slot >> 4, slot & 0xf);
-	}
-#endif
-}
-
-
-/*
- * Audio InfoFrame routines
- */
-
-static void hdmi_debug_dip_size(struct hda_codec *codec, hda_nid_t pin_nid)
-{
-#ifdef CONFIG_SND_DEBUG_VERBOSE
-	int i;
-	int size;
-
-	size = snd_hdmi_get_eld_size(codec, pin_nid);
-	printk(KERN_DEBUG "HDMI: ELD buf size is %d\n", size);
-
-	for (i = 0; i < 8; i++) {
-		size = snd_hda_codec_read(codec, pin_nid, 0,
-						AC_VERB_GET_HDMI_DIP_SIZE, i);
-		printk(KERN_DEBUG "HDMI: DIP GP[%d] buf size is %d\n", i, size);
-	}
-#endif
-}
-
-static void hdmi_clear_dip_buffers(struct hda_codec *codec, hda_nid_t pin_nid)
-{
-#ifdef BE_PARANOID
-	int i, j;
-	int size;
-	int pi, bi;
-	for (i = 0; i < 8; i++) {
-		size = snd_hda_codec_read(codec, pin_nid, 0,
-						AC_VERB_GET_HDMI_DIP_SIZE, i);
-		if (size == 0)
-			continue;
-
-		hdmi_set_dip_index(codec, pin_nid, i, 0x0);
-		for (j = 1; j < 1000; j++) {
-			hdmi_write_dip_byte(codec, pin_nid, 0x0);
-			hdmi_get_dip_index(codec, pin_nid, &pi, &bi);
-			if (pi != i)
-				snd_printd(KERN_INFO "dip index %d: %d != %d\n",
-						bi, pi, i);
-			if (bi == 0) /* byte index wrapped around */
-				break;
-		}
-		snd_printd(KERN_INFO
-			"HDMI: DIP GP[%d] buf reported size=%d, written=%d\n",
-			i, size, j);
-	}
-#endif
-}
-
-static void hdmi_checksum_audio_infoframe(struct hdmi_audio_infoframe *ai)
-{
-	u8 *bytes = (u8 *)ai;
-	u8 sum = 0;
-	int i;
-
-	ai->checksum = 0;
-
-	for (i = 0; i < sizeof(*ai); i++)
-		sum += bytes[i];
-
-	ai->checksum = - sum;
-}
-
-static void hdmi_fill_audio_infoframe(struct hda_codec *codec,
-				      hda_nid_t pin_nid,
-				      struct hdmi_audio_infoframe *ai)
-{
-	u8 *bytes = (u8 *)ai;
-	int i;
-
-	hdmi_debug_dip_size(codec, pin_nid);
-	hdmi_clear_dip_buffers(codec, pin_nid); /* be paranoid */
-
-	hdmi_checksum_audio_infoframe(ai);
-
-	hdmi_set_dip_index(codec, pin_nid, 0x0, 0x0);
-	for (i = 0; i < sizeof(*ai); i++)
-		hdmi_write_dip_byte(codec, pin_nid, bytes[i]);
-}
-
-/*
- * Compute derived values in channel_allocations[].
- */
-static void init_channel_allocations(void)
-{
-	int i, j;
-	struct cea_channel_speaker_allocation *p;
-
-	for (i = 0; i < ARRAY_SIZE(channel_allocations); i++) {
-		p = channel_allocations + i;
-		p->channels = 0;
-		p->spk_mask = 0;
-		for (j = 0; j < ARRAY_SIZE(p->speakers); j++)
-			if (p->speakers[j]) {
-				p->channels++;
-				p->spk_mask |= p->speakers[j];
-			}
-	}
-}
-
-/*
- * The transformation takes two steps:
- *
- * 	eld->spk_alloc => (eld_speaker_allocation_bits[]) => spk_mask
- * 	      spk_mask => (channel_allocations[])         => ai->CA
- *
- * TODO: it could select the wrong CA from multiple candidates.
-*/
-static int hdmi_setup_channel_allocation(struct hda_codec *codec, hda_nid_t nid,
-					 struct hdmi_audio_infoframe *ai)
-{
-	struct intel_hdmi_spec *spec = codec->spec;
-	struct hdmi_eld *eld;
-	int i;
-	int spk_mask = 0;
-	int channels = 1 + (ai->CC02_CT47 & 0x7);
-	char buf[SND_PRINT_CHANNEL_ALLOCATION_ADVISED_BUFSIZE];
-
-	/*
-	 * CA defaults to 0 for basic stereo audio
-	 */
-	if (channels <= 2)
-		return 0;
-
-	i = hda_node_index(spec->pin_cvt, nid);
-	if (i < 0)
-		return 0;
-	eld = &spec->sink_eld[i];
-
-	/*
-	 * HDMI sink's ELD info cannot always be retrieved for now, e.g.
-	 * in console or for audio devices. Assume the highest speakers
-	 * configuration, to _not_ prohibit multi-channel audio playback.
-	 */
-	if (!eld->spk_alloc)
-		eld->spk_alloc = 0xffff;
-
-	/*
-	 * expand ELD's speaker allocation mask
-	 *
-	 * ELD tells the speaker mask in a compact(paired) form,
-	 * expand ELD's notions to match the ones used by Audio InfoFrame.
-	 */
-	for (i = 0; i < ARRAY_SIZE(eld_speaker_allocation_bits); i++) {
-		if (eld->spk_alloc & (1 << i))
-			spk_mask |= eld_speaker_allocation_bits[i];
-	}
-
-	/* search for the first working match in the CA table */
-	for (i = 0; i < ARRAY_SIZE(channel_allocations); i++) {
-		if (channels == channel_allocations[i].channels &&
-		    (spk_mask & channel_allocations[i].spk_mask) ==
-				channel_allocations[i].spk_mask) {
-			ai->CA = channel_allocations[i].ca_index;
-			break;
-		}
-	}
-
-	snd_print_channel_allocation(eld->spk_alloc, buf, sizeof(buf));
-	snd_printdd(KERN_INFO
-			"HDMI: select CA 0x%x for %d-channel allocation: %s\n",
-			ai->CA, channels, buf);
-
-	return ai->CA;
-}
-
-static void hdmi_setup_channel_mapping(struct hda_codec *codec,
-				       hda_nid_t pin_nid,
-				       struct hdmi_audio_infoframe *ai)
-{
-	int i;
-	int ca = ai->CA;
-	int err;
-
-	if (hdmi_channel_mapping[ca][1] == 0) {
-		for (i = 0; i < channel_allocations[ca].channels; i++)
-			hdmi_channel_mapping[ca][i] = i | (i << 4);
-		for (; i < 8; i++)
-			hdmi_channel_mapping[ca][i] = 0xf | (i << 4);
-	}
-
-	for (i = 0; i < 8; i++) {
-		err = snd_hda_codec_write(codec, pin_nid, 0,
-					  AC_VERB_SET_HDMI_CHAN_SLOT,
-					  hdmi_channel_mapping[ca][i]);
-		if (err) {
-			snd_printdd(KERN_INFO "HDMI: channel mapping failed\n");
-			break;
-		}
-	}
-
-	hdmi_debug_channel_mapping(codec, pin_nid);
-}
-
-static bool hdmi_infoframe_uptodate(struct hda_codec *codec, hda_nid_t pin_nid,
-				    struct hdmi_audio_infoframe *ai)
-{
-	u8 *bytes = (u8 *)ai;
-	u8 val;
-	int i;
-
-	if (snd_hda_codec_read(codec, pin_nid, 0, AC_VERB_GET_HDMI_DIP_XMIT, 0)
-							    != AC_DIPXMIT_BEST)
-		return false;
-
-	hdmi_set_dip_index(codec, pin_nid, 0x0, 0x0);
-	for (i = 0; i < sizeof(*ai); i++) {
-		val = snd_hda_codec_read(codec, pin_nid, 0,
-					 AC_VERB_GET_HDMI_DIP_DATA, 0);
-		if (val != bytes[i])
-			return false;
-	}
-
-	return true;
-}
-
-static void hdmi_setup_audio_infoframe(struct hda_codec *codec, hda_nid_t nid,
-					struct snd_pcm_substream *substream)
-{
-	struct intel_hdmi_spec *spec = codec->spec;
-	hda_nid_t pin_nid;
-	int i;
-	struct hdmi_audio_infoframe ai = {
-		.type		= 0x84,
-		.ver		= 0x01,
-		.len		= 0x0a,
-		.CC02_CT47	= substream->runtime->channels - 1,
-	};
-
-	hdmi_setup_channel_allocation(codec, nid, &ai);
-
-	for (i = 0; i < spec->num_pins; i++) {
-		if (spec->pin_cvt[i] != nid)
-			continue;
-		if (!spec->sink_eld[i].monitor_present)
-			continue;
-
-		pin_nid = spec->pin[i];
-		if (!hdmi_infoframe_uptodate(codec, pin_nid, &ai)) {
-			hdmi_setup_channel_mapping(codec, pin_nid, &ai);
-			hdmi_stop_infoframe_trans(codec, pin_nid);
-			hdmi_fill_audio_infoframe(codec, pin_nid, &ai);
-			hdmi_start_infoframe_trans(codec, pin_nid);
-		}
-	}
-}
-
-
 /*
- * Unsolicited events
+ * HDMI callbacks
  */
 
-static void hdmi_intrinsic_event(struct hda_codec *codec, unsigned int res)
-{
-	struct intel_hdmi_spec *spec = codec->spec;
-	int tag = res >> AC_UNSOL_RES_TAG_SHIFT;
-	int pind = !!(res & AC_UNSOL_RES_PD);
-	int eldv = !!(res & AC_UNSOL_RES_ELDV);
-	int index;
-
-	printk(KERN_INFO
-		"HDMI hot plug event: Pin=%d Presence_Detect=%d ELD_Valid=%d\n",
-		tag, pind, eldv);
-
-	index = hda_node_index(spec->pin, tag);
-	if (index < 0)
-		return;
-
-	spec->sink_eld[index].monitor_present = pind;
-	spec->sink_eld[index].eld_valid = eldv;
-
-	if (pind && eldv) {
-		hdmi_get_show_eld(codec, spec->pin[index], &spec->sink_eld[index]);
-		/* TODO: do real things about ELD */
-	}
-}
-
-static void hdmi_non_intrinsic_event(struct hda_codec *codec, unsigned int res)
-{
-	int tag = res >> AC_UNSOL_RES_TAG_SHIFT;
-	int subtag = (res & AC_UNSOL_RES_SUBTAG) >> AC_UNSOL_RES_SUBTAG_SHIFT;
-	int cp_state = !!(res & AC_UNSOL_RES_CP_STATE);
-	int cp_ready = !!(res & AC_UNSOL_RES_CP_READY);
-
-	printk(KERN_INFO
-		"HDMI CP event: PIN=%d SUBTAG=0x%x CP_STATE=%d CP_READY=%d\n",
-		tag,
-		subtag,
-		cp_state,
-		cp_ready);
-
-	/* TODO */
-	if (cp_state)
-		;
-	if (cp_ready)
-		;
-}
-
-
-static void intel_hdmi_unsol_event(struct hda_codec *codec, unsigned int res)
-{
-	struct intel_hdmi_spec *spec = codec->spec;
-	int tag = res >> AC_UNSOL_RES_TAG_SHIFT;
-	int subtag = (res & AC_UNSOL_RES_SUBTAG) >> AC_UNSOL_RES_SUBTAG_SHIFT;
-
-	if (hda_node_index(spec->pin, tag) < 0) {
-		snd_printd(KERN_INFO "Unexpected HDMI event tag 0x%x\n", tag);
-		return;
-	}
-
-	if (subtag == 0)
-		hdmi_intrinsic_event(codec, res);
-	else
-		hdmi_non_intrinsic_event(codec, res);
-}
-
-/*
- * Callbacks
- */
-
-static void hdmi_setup_stream(struct hda_codec *codec, hda_nid_t nid,
-			      u32 stream_tag, int format)
-{
-	int tag;
-	int fmt;
-
-	tag = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_CONV, 0) >> 4;
-	fmt = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_STREAM_FORMAT, 0);
-
-	snd_printdd("hdmi_setup_stream: "
-		    "NID=0x%x, %sstream=0x%x, %sformat=0x%x\n",
-		    nid,
-		    tag == stream_tag ? "" : "new-",
-		    stream_tag,
-		    fmt == format ? "" : "new-",
-		    format);
-
-	if (tag != stream_tag)
-		snd_hda_codec_write(codec, nid, 0,
-				    AC_VERB_SET_CHANNEL_STREAMID, stream_tag << 4);
-	if (fmt != format)
-		snd_hda_codec_write(codec, nid, 0,
-				    AC_VERB_SET_STREAM_FORMAT, format);
-}
-
 static int intel_hdmi_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
 					   struct hda_codec *codec,
 					   unsigned int stream_tag,
@@ -882,7 +87,7 @@ static struct hda_pcm_stream intel_hdmi_pcm_playback = {
 
 static int intel_hdmi_build_pcms(struct hda_codec *codec)
 {
-	struct intel_hdmi_spec *spec = codec->spec;
+	struct hdmi_spec *spec = codec->spec;
 	struct hda_pcm *info = spec->pcm_rec;
 	int i;
 
@@ -908,7 +113,7 @@ static int intel_hdmi_build_pcms(struct hda_codec *codec)
 
 static int intel_hdmi_build_controls(struct hda_codec *codec)
 {
-	struct intel_hdmi_spec *spec = codec->spec;
+	struct hdmi_spec *spec = codec->spec;
 	int err;
 	int i;
 
@@ -923,7 +128,7 @@ static int intel_hdmi_build_controls(struct hda_codec *codec)
 
 static int intel_hdmi_init(struct hda_codec *codec)
 {
-	struct intel_hdmi_spec *spec = codec->spec;
+	struct hdmi_spec *spec = codec->spec;
 	int i;
 
 	for (i = 0; spec->pin[i]; i++) {
@@ -937,7 +142,7 @@ static int intel_hdmi_init(struct hda_codec *codec)
 
 static void intel_hdmi_free(struct hda_codec *codec)
 {
-	struct intel_hdmi_spec *spec = codec->spec;
+	struct hdmi_spec *spec = codec->spec;
 	int i;
 
 	for (i = 0; i < spec->num_pins; i++)
@@ -951,12 +156,12 @@ static struct hda_codec_ops intel_hdmi_patch_ops = {
 	.free			= intel_hdmi_free,
 	.build_pcms		= intel_hdmi_build_pcms,
 	.build_controls 	= intel_hdmi_build_controls,
-	.unsol_event		= intel_hdmi_unsol_event,
+	.unsol_event		= hdmi_unsol_event,
 };
 
 static int patch_intel_hdmi(struct hda_codec *codec)
 {
-	struct intel_hdmi_spec *spec;
+	struct hdmi_spec *spec;
 	int i;
 
 	spec = kzalloc(sizeof(*spec), GFP_KERNEL);
@@ -964,7 +169,7 @@ static int patch_intel_hdmi(struct hda_codec *codec)
 		return -ENOMEM;
 
 	codec->spec = spec;
-	if (intel_hdmi_parse_codec(codec) < 0) {
+	if (hdmi_parse_codec(codec) < 0) {
 		codec->spec = NULL;
 		kfree(spec);
 		return -EINVAL;
diff --git a/sound/pci/hda/patch_nvhdmi.c b/sound/pci/hda/patch_nvhdmi.c
index 6afdab09bab7..70669a246902 100644
--- a/sound/pci/hda/patch_nvhdmi.c
+++ b/sound/pci/hda/patch_nvhdmi.c
@@ -29,13 +29,23 @@
 #include "hda_codec.h"
 #include "hda_local.h"
 
+#define MAX_HDMI_CVTS	1
+#define MAX_HDMI_PINS	1
+
+#include "patch_hdmi.c"
+
+static char *nvhdmi_pcm_names[MAX_HDMI_CVTS] = {
+	"NVIDIA HDMI",
+};
+
 /* define below to restrict the supported rates and formats */
 /* #define LIMITED_RATE_FMT_SUPPORT */
 
-struct nvhdmi_spec {
-	struct hda_multi_out multiout;
-
-	struct hda_pcm pcm_rec;
+enum HDACodec {
+	HDA_CODEC_NVIDIA_MCP7X,
+	HDA_CODEC_NVIDIA_MCP89,
+	HDA_CODEC_NVIDIA_GT21X,
+	HDA_CODEC_INVALID
 };
 
 #define Nv_VERB_SET_Channel_Allocation          0xF79
@@ -43,15 +53,18 @@ struct nvhdmi_spec {
 #define Nv_VERB_SET_Audio_Protection_On         0xF98
 #define Nv_VERB_SET_Audio_Protection_Off        0xF99
 
-#define Nv_Master_Convert_nid   0x04
-#define Nv_Master_Pin_nid       0x05
+#define nvhdmi_master_con_nid_7x	0x04
+#define nvhdmi_master_pin_nid_7x	0x05
 
-static hda_nid_t nvhdmi_convert_nids[4] = {
+#define nvhdmi_master_con_nid_89	0x04
+#define nvhdmi_master_pin_nid_89	0x05
+
+static hda_nid_t nvhdmi_con_nids_7x[4] = {
 	/*front, rear, clfe, rear_surr */
 	0x6, 0x8, 0xa, 0xc,
 };
 
-static struct hda_verb nvhdmi_basic_init[] = {
+static struct hda_verb nvhdmi_basic_init_7x[] = {
 	/* set audio protect on */
 	{ 0x1, Nv_VERB_SET_Audio_Protection_On, 0x1},
 	/* enable digital output on pin widget */
@@ -84,22 +97,60 @@ static struct hda_verb nvhdmi_basic_init[] = {
  */
 static int nvhdmi_build_controls(struct hda_codec *codec)
 {
-	struct nvhdmi_spec *spec = codec->spec;
+	struct hdmi_spec *spec = codec->spec;
 	int err;
+	int i;
 
-	err = snd_hda_create_spdif_out_ctls(codec, spec->multiout.dig_out_nid);
-	if (err < 0)
-		return err;
+	if ((spec->codec_type == HDA_CODEC_NVIDIA_MCP89)
+	|| (spec->codec_type == HDA_CODEC_NVIDIA_GT21X)) {
+		for (i = 0; i < codec->num_pcms; i++) {
+			err = snd_hda_create_spdif_out_ctls(codec,
+							    spec->cvt[i]);
+			if (err < 0)
+				return err;
+		}
+	} else {
+		err = snd_hda_create_spdif_out_ctls(codec,
+						    spec->multiout.dig_out_nid);
+		if (err < 0)
+			return err;
+	}
 
 	return 0;
 }
 
 static int nvhdmi_init(struct hda_codec *codec)
 {
-	snd_hda_sequence_write(codec, nvhdmi_basic_init);
+	struct hdmi_spec *spec = codec->spec;
+	int i;
+	if ((spec->codec_type == HDA_CODEC_NVIDIA_MCP89)
+	|| (spec->codec_type == HDA_CODEC_NVIDIA_GT21X)) {
+		for (i = 0; spec->pin[i]; i++) {
+			hdmi_enable_output(codec, spec->pin[i]);
+			snd_hda_codec_write(codec, spec->pin[i], 0,
+					    AC_VERB_SET_UNSOLICITED_ENABLE,
+					    AC_USRSP_EN | spec->pin[i]);
+		}
+	} else {
+		snd_hda_sequence_write(codec, nvhdmi_basic_init_7x);
+	}
 	return 0;
 }
 
+static void nvhdmi_free(struct hda_codec *codec)
+{
+	struct hdmi_spec *spec = codec->spec;
+	int i;
+
+	if ((spec->codec_type == HDA_CODEC_NVIDIA_MCP89)
+	|| (spec->codec_type == HDA_CODEC_NVIDIA_GT21X)) {
+		for (i = 0; i < spec->num_pins; i++)
+			snd_hda_eld_proc_free(codec, &spec->sink_eld[i]);
+	}
+
+	kfree(spec);
+}
+
 /*
  * Digital out
  */
@@ -107,25 +158,25 @@ static int nvhdmi_dig_playback_pcm_open(struct hda_pcm_stream *hinfo,
 					struct hda_codec *codec,
 					struct snd_pcm_substream *substream)
 {
-	struct nvhdmi_spec *spec = codec->spec;
+	struct hdmi_spec *spec = codec->spec;
 	return snd_hda_multi_out_dig_open(codec, &spec->multiout);
 }
 
-static int nvhdmi_dig_playback_pcm_close_8ch(struct hda_pcm_stream *hinfo,
+static int nvhdmi_dig_playback_pcm_close_8ch_7x(struct hda_pcm_stream *hinfo,
 					struct hda_codec *codec,
 					struct snd_pcm_substream *substream)
 {
-	struct nvhdmi_spec *spec = codec->spec;
+	struct hdmi_spec *spec = codec->spec;
 	int i;
 
-	snd_hda_codec_write(codec, Nv_Master_Convert_nid,
+	snd_hda_codec_write(codec, nvhdmi_master_con_nid_7x,
 			0, AC_VERB_SET_CHANNEL_STREAMID, 0);
 	for (i = 0; i < 4; i++) {
 		/* set the stream id */
-		snd_hda_codec_write(codec, nvhdmi_convert_nids[i], 0,
+		snd_hda_codec_write(codec, nvhdmi_con_nids_7x[i], 0,
 				AC_VERB_SET_CHANNEL_STREAMID, 0);
 		/* set the stream format */
-		snd_hda_codec_write(codec, nvhdmi_convert_nids[i], 0,
+		snd_hda_codec_write(codec, nvhdmi_con_nids_7x[i], 0,
 				AC_VERB_SET_STREAM_FORMAT, 0);
 	}
 
@@ -136,10 +187,25 @@ static int nvhdmi_dig_playback_pcm_close_2ch(struct hda_pcm_stream *hinfo,
 					struct hda_codec *codec,
 					struct snd_pcm_substream *substream)
 {
-	struct nvhdmi_spec *spec = codec->spec;
+	struct hdmi_spec *spec = codec->spec;
 	return snd_hda_multi_out_dig_close(codec, &spec->multiout);
 }
 
+static int nvhdmi_dig_playback_pcm_prepare_8ch_89(struct hda_pcm_stream *hinfo,
+					struct hda_codec *codec,
+					unsigned int stream_tag,
+					unsigned int format,
+					struct snd_pcm_substream *substream)
+{
+	hdmi_set_channel_count(codec, hinfo->nid,
+			       substream->runtime->channels);
+
+	hdmi_setup_audio_infoframe(codec, hinfo->nid, substream);
+
+	hdmi_setup_stream(codec, hinfo->nid, stream_tag, format);
+	return 0;
+}
+
 static int nvhdmi_dig_playback_pcm_prepare_8ch(struct hda_pcm_stream *hinfo,
 					struct hda_codec *codec,
 					unsigned int stream_tag,
@@ -181,29 +247,29 @@ static int nvhdmi_dig_playback_pcm_prepare_8ch(struct hda_pcm_stream *hinfo,
 	/* turn off SPDIF once; otherwise the IEC958 bits won't be updated */
 	if (codec->spdif_status_reset && (codec->spdif_ctls & AC_DIG1_ENABLE))
 		snd_hda_codec_write(codec,
-				Nv_Master_Convert_nid,
+				nvhdmi_master_con_nid_7x,
 				0,
 				AC_VERB_SET_DIGI_CONVERT_1,
 				codec->spdif_ctls & ~AC_DIG1_ENABLE & 0xff);
 
 	/* set the stream id */
-	snd_hda_codec_write(codec, Nv_Master_Convert_nid, 0,
+	snd_hda_codec_write(codec, nvhdmi_master_con_nid_7x, 0,
 			AC_VERB_SET_CHANNEL_STREAMID, (stream_tag << 4) | 0x0);
 
 	/* set the stream format */
-	snd_hda_codec_write(codec, Nv_Master_Convert_nid, 0,
+	snd_hda_codec_write(codec, nvhdmi_master_con_nid_7x, 0,
 			AC_VERB_SET_STREAM_FORMAT, format);
 
 	/* turn on again (if needed) */
 	/* enable and set the channel status audio/data flag */
 	if (codec->spdif_status_reset && (codec->spdif_ctls & AC_DIG1_ENABLE)) {
 		snd_hda_codec_write(codec,
-				Nv_Master_Convert_nid,
+				nvhdmi_master_con_nid_7x,
 				0,
 				AC_VERB_SET_DIGI_CONVERT_1,
 				codec->spdif_ctls & 0xff);
 		snd_hda_codec_write(codec,
-				Nv_Master_Convert_nid,
+				nvhdmi_master_con_nid_7x,
 				0,
 				AC_VERB_SET_DIGI_CONVERT_2, dataDCC2);
 	}
@@ -220,19 +286,19 @@ static int nvhdmi_dig_playback_pcm_prepare_8ch(struct hda_pcm_stream *hinfo,
 		if (codec->spdif_status_reset &&
 		(codec->spdif_ctls & AC_DIG1_ENABLE))
 			snd_hda_codec_write(codec,
-				nvhdmi_convert_nids[i],
+				nvhdmi_con_nids_7x[i],
 				0,
 				AC_VERB_SET_DIGI_CONVERT_1,
 				codec->spdif_ctls & ~AC_DIG1_ENABLE & 0xff);
 		/* set the stream id */
 		snd_hda_codec_write(codec,
-				nvhdmi_convert_nids[i],
+				nvhdmi_con_nids_7x[i],
 				0,
 				AC_VERB_SET_CHANNEL_STREAMID,
 				(stream_tag << 4) | channel_id);
 		/* set the stream format */
 		snd_hda_codec_write(codec,
-				nvhdmi_convert_nids[i],
+				nvhdmi_con_nids_7x[i],
 				0,
 				AC_VERB_SET_STREAM_FORMAT,
 				format);
@@ -241,12 +307,12 @@ static int nvhdmi_dig_playback_pcm_prepare_8ch(struct hda_pcm_stream *hinfo,
 		if (codec->spdif_status_reset &&
 		(codec->spdif_ctls & AC_DIG1_ENABLE)) {
 			snd_hda_codec_write(codec,
-					nvhdmi_convert_nids[i],
+					nvhdmi_con_nids_7x[i],
 					0,
 					AC_VERB_SET_DIGI_CONVERT_1,
 					codec->spdif_ctls & 0xff);
 			snd_hda_codec_write(codec,
-					nvhdmi_convert_nids[i],
+					nvhdmi_con_nids_7x[i],
 					0,
 					AC_VERB_SET_DIGI_CONVERT_2, dataDCC2);
 		}
@@ -261,28 +327,47 @@ static int nvhdmi_dig_playback_pcm_prepare_8ch(struct hda_pcm_stream *hinfo,
 	return 0;
 }
 
+static int nvhdmi_playback_pcm_cleanup(struct hda_pcm_stream *hinfo,
+					   struct hda_codec *codec,
+					   struct snd_pcm_substream *substream)
+{
+	return 0;
+}
+
 static int nvhdmi_dig_playback_pcm_prepare_2ch(struct hda_pcm_stream *hinfo,
 					struct hda_codec *codec,
 					unsigned int stream_tag,
 					unsigned int format,
 					struct snd_pcm_substream *substream)
 {
-	struct nvhdmi_spec *spec = codec->spec;
+	struct hdmi_spec *spec = codec->spec;
 	return snd_hda_multi_out_dig_prepare(codec, &spec->multiout, stream_tag,
 					format, substream);
 }
 
-static struct hda_pcm_stream nvhdmi_pcm_digital_playback_8ch = {
+static struct hda_pcm_stream nvhdmi_pcm_digital_playback_8ch_89 = {
+	.substreams = 1,
+	.channels_min = 2,
+	.rates = SUPPORTED_RATES,
+	.maxbps = SUPPORTED_MAXBPS,
+	.formats = SUPPORTED_FORMATS,
+	.ops = {
+		.prepare = nvhdmi_dig_playback_pcm_prepare_8ch_89,
+		.cleanup = nvhdmi_playback_pcm_cleanup,
+	},
+};
+
+static struct hda_pcm_stream nvhdmi_pcm_digital_playback_8ch_7x = {
 	.substreams = 1,
 	.channels_min = 2,
 	.channels_max = 8,
-	.nid = Nv_Master_Convert_nid,
+	.nid = nvhdmi_master_con_nid_7x,
 	.rates = SUPPORTED_RATES,
 	.maxbps = SUPPORTED_MAXBPS,
 	.formats = SUPPORTED_FORMATS,
 	.ops = {
 		.open = nvhdmi_dig_playback_pcm_open,
-		.close = nvhdmi_dig_playback_pcm_close_8ch,
+		.close = nvhdmi_dig_playback_pcm_close_8ch_7x,
 		.prepare = nvhdmi_dig_playback_pcm_prepare_8ch
 	},
 };
@@ -291,7 +376,7 @@ static struct hda_pcm_stream nvhdmi_pcm_digital_playback_2ch = {
 	.substreams = 1,
 	.channels_min = 2,
 	.channels_max = 2,
-	.nid = Nv_Master_Convert_nid,
+	.nid = nvhdmi_master_con_nid_7x,
 	.rates = SUPPORTED_RATES,
 	.maxbps = SUPPORTED_MAXBPS,
 	.formats = SUPPORTED_FORMATS,
@@ -302,10 +387,36 @@ static struct hda_pcm_stream nvhdmi_pcm_digital_playback_2ch = {
 	},
 };
 
-static int nvhdmi_build_pcms_8ch(struct hda_codec *codec)
+static int nvhdmi_build_pcms_8ch_89(struct hda_codec *codec)
+{
+	struct hdmi_spec *spec = codec->spec;
+	struct hda_pcm *info = spec->pcm_rec;
+	int i;
+
+	codec->num_pcms = spec->num_cvts;
+	codec->pcm_info = info;
+
+	for (i = 0; i < codec->num_pcms; i++, info++) {
+		unsigned int chans;
+
+		chans = get_wcaps(codec, spec->cvt[i]);
+		chans = get_wcaps_channels(chans);
+
+		info->name = nvhdmi_pcm_names[i];
+		info->pcm_type = HDA_PCM_TYPE_HDMI;
+		info->stream[SNDRV_PCM_STREAM_PLAYBACK]
+					= nvhdmi_pcm_digital_playback_8ch_89;
+		info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = spec->cvt[i];
+		info->stream[SNDRV_PCM_STREAM_PLAYBACK].channels_max = chans;
+	}
+
+	return 0;
+}
+
+static int nvhdmi_build_pcms_8ch_7x(struct hda_codec *codec)
 {
-	struct nvhdmi_spec *spec = codec->spec;
-	struct hda_pcm *info = &spec->pcm_rec;
+	struct hdmi_spec *spec = codec->spec;
+	struct hda_pcm *info = spec->pcm_rec;
 
 	codec->num_pcms = 1;
 	codec->pcm_info = info;
@@ -313,15 +424,15 @@ static int nvhdmi_build_pcms_8ch(struct hda_codec *codec)
 	info->name = "NVIDIA HDMI";
 	info->pcm_type = HDA_PCM_TYPE_HDMI;
 	info->stream[SNDRV_PCM_STREAM_PLAYBACK]
-					= nvhdmi_pcm_digital_playback_8ch;
+					= nvhdmi_pcm_digital_playback_8ch_7x;
 
 	return 0;
 }
 
 static int nvhdmi_build_pcms_2ch(struct hda_codec *codec)
 {
-	struct nvhdmi_spec *spec = codec->spec;
-	struct hda_pcm *info = &spec->pcm_rec;
+	struct hdmi_spec *spec = codec->spec;
+	struct hda_pcm *info = spec->pcm_rec;
 
 	codec->num_pcms = 1;
 	codec->pcm_info = info;
@@ -334,14 +445,17 @@ static int nvhdmi_build_pcms_2ch(struct hda_codec *codec)
 	return 0;
 }
 
-static void nvhdmi_free(struct hda_codec *codec)
-{
-	kfree(codec->spec);
-}
+static struct hda_codec_ops nvhdmi_patch_ops_8ch_89 = {
+	.build_controls = nvhdmi_build_controls,
+	.build_pcms = nvhdmi_build_pcms_8ch_89,
+	.init = nvhdmi_init,
+	.free = nvhdmi_free,
+	.unsol_event = hdmi_unsol_event,
+};
 
-static struct hda_codec_ops nvhdmi_patch_ops_8ch = {
+static struct hda_codec_ops nvhdmi_patch_ops_8ch_7x = {
 	.build_controls = nvhdmi_build_controls,
-	.build_pcms = nvhdmi_build_pcms_8ch,
+	.build_pcms = nvhdmi_build_pcms_8ch_7x,
 	.init = nvhdmi_init,
 	.free = nvhdmi_free,
 };
@@ -353,9 +467,36 @@ static struct hda_codec_ops nvhdmi_patch_ops_2ch = {
 	.free = nvhdmi_free,
 };
 
-static int patch_nvhdmi_8ch(struct hda_codec *codec)
+static int patch_nvhdmi_8ch_89(struct hda_codec *codec)
+{
+	struct hdmi_spec *spec;
+	int i;
+
+	spec = kzalloc(sizeof(*spec), GFP_KERNEL);
+	if (spec == NULL)
+		return -ENOMEM;
+
+	codec->spec = spec;
+	spec->codec_type = HDA_CODEC_NVIDIA_MCP89;
+
+	if (hdmi_parse_codec(codec) < 0) {
+		codec->spec = NULL;
+		kfree(spec);
+		return -EINVAL;
+	}
+	codec->patch_ops = nvhdmi_patch_ops_8ch_89;
+
+	for (i = 0; i < spec->num_pins; i++)
+		snd_hda_eld_proc_new(codec, &spec->sink_eld[i], i);
+
+	init_channel_allocations();
+
+	return 0;
+}
+
+static int patch_nvhdmi_8ch_7x(struct hda_codec *codec)
 {
-	struct nvhdmi_spec *spec;
+	struct hdmi_spec *spec;
 
 	spec = kzalloc(sizeof(*spec), GFP_KERNEL);
 	if (spec == NULL)
@@ -365,16 +506,17 @@ static int patch_nvhdmi_8ch(struct hda_codec *codec)
 
 	spec->multiout.num_dacs = 0;  /* no analog */
 	spec->multiout.max_channels = 8;
-	spec->multiout.dig_out_nid = Nv_Master_Convert_nid;
+	spec->multiout.dig_out_nid = nvhdmi_master_con_nid_7x;
+	spec->codec_type = HDA_CODEC_NVIDIA_MCP7X;
 
-	codec->patch_ops = nvhdmi_patch_ops_8ch;
+	codec->patch_ops = nvhdmi_patch_ops_8ch_7x;
 
 	return 0;
 }
 
 static int patch_nvhdmi_2ch(struct hda_codec *codec)
 {
-	struct nvhdmi_spec *spec;
+	struct hdmi_spec *spec;
 
 	spec = kzalloc(sizeof(*spec), GFP_KERNEL);
 	if (spec == NULL)
@@ -384,7 +526,8 @@ static int patch_nvhdmi_2ch(struct hda_codec *codec)
 
 	spec->multiout.num_dacs = 0;  /* no analog */
 	spec->multiout.max_channels = 2;
-	spec->multiout.dig_out_nid = Nv_Master_Convert_nid;
+	spec->multiout.dig_out_nid = nvhdmi_master_con_nid_7x;
+	spec->codec_type = HDA_CODEC_NVIDIA_MCP7X;
 
 	codec->patch_ops = nvhdmi_patch_ops_2ch;
 
@@ -395,13 +538,24 @@ static int patch_nvhdmi_2ch(struct hda_codec *codec)
  * patch entries
  */
 static struct hda_codec_preset snd_hda_preset_nvhdmi[] = {
-	{ .id = 0x10de0002, .name = "MCP78 HDMI", .patch = patch_nvhdmi_8ch },
-	{ .id = 0x10de0003, .name = "MCP78 HDMI", .patch = patch_nvhdmi_8ch },
-	{ .id = 0x10de0005, .name = "MCP78 HDMI", .patch = patch_nvhdmi_8ch },
-	{ .id = 0x10de0006, .name = "MCP78 HDMI", .patch = patch_nvhdmi_8ch },
-	{ .id = 0x10de0007, .name = "MCP7A HDMI", .patch = patch_nvhdmi_8ch },
 	{ .id = 0x10de0067, .name = "MCP67 HDMI", .patch = patch_nvhdmi_2ch },
 	{ .id = 0x10de8001, .name = "MCP73 HDMI", .patch = patch_nvhdmi_2ch },
+	{ .id = 0x10de0002, .name = "MCP77/78 HDMI",
+	  .patch = patch_nvhdmi_8ch_7x },
+	{ .id = 0x10de0003, .name = "MCP77/78 HDMI",
+	  .patch = patch_nvhdmi_8ch_7x },
+	{ .id = 0x10de0005, .name = "MCP77/78 HDMI",
+	  .patch = patch_nvhdmi_8ch_7x },
+	{ .id = 0x10de0006, .name = "MCP77/78 HDMI",
+	  .patch = patch_nvhdmi_8ch_7x },
+	{ .id = 0x10de0007, .name = "MCP79/7A HDMI",
+	  .patch = patch_nvhdmi_8ch_7x },
+	{ .id = 0x10de000c, .name = "MCP89 HDMI",
+	  .patch = patch_nvhdmi_8ch_89 },
+	{ .id = 0x10de000b, .name = "GT21x HDMI",
+	  .patch = patch_nvhdmi_8ch_89 },
+	{ .id = 0x10de000d, .name = "GT240 HDMI",
+	  .patch = patch_nvhdmi_8ch_89 },
 	{} /* terminator */
 };
 
@@ -412,9 +566,12 @@ MODULE_ALIAS("snd-hda-codec-id:10de0006");
 MODULE_ALIAS("snd-hda-codec-id:10de0007");
 MODULE_ALIAS("snd-hda-codec-id:10de0067");
 MODULE_ALIAS("snd-hda-codec-id:10de8001");
+MODULE_ALIAS("snd-hda-codec-id:10de000c");
+MODULE_ALIAS("snd-hda-codec-id:10de000b");
+MODULE_ALIAS("snd-hda-codec-id:10de000d");
 
 MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Nvidia HDMI HD-audio codec");
+MODULE_DESCRIPTION("NVIDIA HDMI HD-audio codec");
 
 static struct hda_codec_preset_list nvhdmi_list = {
 	.preset = snd_hda_preset_nvhdmi,
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index e8cbe216e912..4ec57633af88 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -411,6 +411,8 @@ static int alc_mux_enum_info(struct snd_kcontrol *kcontrol,
 	unsigned int mux_idx = snd_ctl_get_ioffidx(kcontrol, &uinfo->id);
 	if (mux_idx >= spec->num_mux_defs)
 		mux_idx = 0;
+	if (!spec->input_mux[mux_idx].num_items && mux_idx > 0)
+		mux_idx = 0;
 	return snd_hda_input_mux_info(&spec->input_mux[mux_idx], uinfo);
 }
 
@@ -439,6 +441,8 @@ static int alc_mux_enum_put(struct snd_kcontrol *kcontrol,
 
 	mux_idx = adc_idx >= spec->num_mux_defs ? 0 : adc_idx;
 	imux = &spec->input_mux[mux_idx];
+	if (!imux->num_items && mux_idx > 0)
+		imux = &spec->input_mux[0];
 
 	type = get_wcaps_type(get_wcaps(codec, nid));
 	if (type == AC_WID_AUD_MIX) {
@@ -4915,7 +4919,7 @@ static void fixup_automic_adc(struct hda_codec *codec)
 static void fixup_single_adc(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
-	hda_nid_t pin;
+	hda_nid_t pin = 0;
 	int i;
 
 	/* search for the input pin; there must be only one */
@@ -6473,7 +6477,7 @@ static struct alc_config_preset alc260_presets[] = {
 		.num_dacs = ARRAY_SIZE(alc260_dac_nids),
 		.dac_nids = alc260_dac_nids,
 		.num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids),
-		.adc_nids = alc260_adc_nids,
+		.adc_nids = alc260_dual_adc_nids,
 		.num_channel_mode = ARRAY_SIZE(alc260_modes),
 		.channel_mode = alc260_modes,
 		.input_mux = &alc260_capture_source,
@@ -9191,6 +9195,7 @@ static struct snd_pci_quirk alc882_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x1462, 0x4314, "MSI", ALC883_TARGA_DIG),
 	SND_PCI_QUIRK(0x1462, 0x4319, "MSI", ALC883_TARGA_DIG),
 	SND_PCI_QUIRK(0x1462, 0x4324, "MSI", ALC883_TARGA_DIG),
+	SND_PCI_QUIRK(0x1462, 0x4570, "MSI Wind Top AE2220", ALC883_TARGA_DIG),
 	SND_PCI_QUIRK(0x1462, 0x6510, "MSI GX620", ALC883_TARGA_8ch_DIG),
 	SND_PCI_QUIRK(0x1462, 0x6668, "MSI", ALC883_6ST_DIG),
 	SND_PCI_QUIRK(0x1462, 0x7187, "MSI", ALC883_6ST_DIG),
@@ -9200,6 +9205,7 @@ static struct snd_pci_quirk alc882_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x1462, 0x7280, "MSI", ALC883_6ST_DIG),
 	SND_PCI_QUIRK(0x1462, 0x7327, "MSI", ALC883_6ST_DIG),
 	SND_PCI_QUIRK(0x1462, 0x7350, "MSI", ALC883_6ST_DIG),
+	SND_PCI_QUIRK(0x1462, 0x7437, "MSI NetOn AP1900", ALC883_TARGA_DIG),
 	SND_PCI_QUIRK(0x1462, 0xa422, "MSI", ALC883_TARGA_2ch_DIG),
 	SND_PCI_QUIRK(0x1462, 0xaa08, "MSI", ALC883_TARGA_2ch_DIG),
 
@@ -9231,7 +9237,7 @@ static struct snd_pci_quirk alc882_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x8086, 0x0022, "DX58SO", ALC889_INTEL),
 	SND_PCI_QUIRK(0x8086, 0x0021, "Intel IbexPeak", ALC889A_INTEL),
 	SND_PCI_QUIRK(0x8086, 0x3b56, "Intel IbexPeak", ALC889A_INTEL),
-	SND_PCI_QUIRK(0x8086, 0xd601, "D102GGC", ALC883_3ST_6ch),
+	SND_PCI_QUIRK(0x8086, 0xd601, "D102GGC", ALC882_6ST_DIG),
 
 	{}
 };
@@ -10105,6 +10111,8 @@ static void alc882_auto_init_input_src(struct hda_codec *codec)
 			continue;
 		mux_idx = c >= spec->num_mux_defs ? 0 : c;
 		imux = &spec->input_mux[mux_idx];
+		if (!imux->num_items && mux_idx > 0)
+			imux = &spec->input_mux[0];
 		for (idx = 0; idx < conns; idx++) {
 			/* if the current connection is the selected one,
 			 * unmute it as default - otherwise mute it
@@ -13201,7 +13209,7 @@ static int patch_alc268(struct hda_codec *codec)
 
 	if (board_config < 0 || board_config >= ALC268_MODEL_LAST)
 		board_config = snd_hda_check_board_codec_sid_config(codec,
-			ALC882_MODEL_LAST, alc268_models, alc268_ssid_cfg_tbl);
+			ALC268_MODEL_LAST, alc268_models, alc268_ssid_cfg_tbl);
 
 	if (board_config < 0 || board_config >= ALC268_MODEL_LAST) {
 		printk(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
@@ -13561,6 +13569,8 @@ static void alc269_lifebook_unsol_event(struct hda_codec *codec,
 static void alc269_quanta_fl1_setup(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
+	spec->autocfg.hp_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x14;
 	spec->ext_mic.pin = 0x18;
 	spec->ext_mic.mux_idx = 0;
 	spec->int_mic.pin = 0x19;
@@ -13656,6 +13666,8 @@ static void alc269_laptop_unsol_event(struct hda_codec *codec,
 static void alc269_laptop_dmic_setup(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
+	spec->autocfg.hp_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x14;
 	spec->ext_mic.pin = 0x18;
 	spec->ext_mic.mux_idx = 0;
 	spec->int_mic.pin = 0x12;
@@ -13666,6 +13678,8 @@ static void alc269_laptop_dmic_setup(struct hda_codec *codec)
 static void alc269vb_laptop_dmic_setup(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
+	spec->autocfg.hp_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x14;
 	spec->ext_mic.pin = 0x18;
 	spec->ext_mic.mux_idx = 0;
 	spec->int_mic.pin = 0x12;
@@ -13676,6 +13690,8 @@ static void alc269vb_laptop_dmic_setup(struct hda_codec *codec)
 static void alc269_laptop_amic_setup(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
+	spec->autocfg.hp_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x14;
 	spec->ext_mic.pin = 0x18;
 	spec->ext_mic.mux_idx = 0;
 	spec->int_mic.pin = 0x19;
diff --git a/sound/pci/oxygen/xonar_wm87x6.c b/sound/pci/oxygen/xonar_wm87x6.c
index 7754db166d9e..dbc4b89d74e4 100644
--- a/sound/pci/oxygen/xonar_wm87x6.c
+++ b/sound/pci/oxygen/xonar_wm87x6.c
@@ -68,7 +68,7 @@ static void wm8776_write(struct oxygen *chip,
 			 OXYGEN_SPI_CEN_LATCH_CLOCK_LO,
 			 (reg << 9) | value);
 	if (reg < ARRAY_SIZE(data->wm8776_regs)) {
-		if (reg >= WM8776_HPLVOL || reg <= WM8776_DACMASTER)
+		if (reg >= WM8776_HPLVOL && reg <= WM8776_DACMASTER)
 			value &= ~WM8776_UPDATE;
 		data->wm8776_regs[reg] = value;
 	}
diff --git a/sound/pci/riptide/riptide.c b/sound/pci/riptide/riptide.c
index 960a227eb653..ad4462677615 100644
--- a/sound/pci/riptide/riptide.c
+++ b/sound/pci/riptide/riptide.c
@@ -1974,9 +1974,9 @@ snd_riptide_proc_read(struct snd_info_entry *entry,
 	}
 	snd_iprintf(buffer, "Paths:\n");
 	i = getpaths(cif, p);
-	while (i--) {
-		snd_iprintf(buffer, "%x->%x ", p[i - 1], p[i]);
-		i--;
+	while (i >= 2) {
+		i -= 2;
+		snd_iprintf(buffer, "%x->%x ", p[i], p[i + 1]);
 	}
 	snd_iprintf(buffer, "\n");
 }
diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c
index 3d72c1effeef..547b713d7204 100644
--- a/sound/pci/rme9652/hdspm.c
+++ b/sound/pci/rme9652/hdspm.c
@@ -2479,7 +2479,7 @@ static int snd_hdspm_put_qs_wire(struct snd_kcontrol *kcontrol,
    on MADICARD 
   - playback mixer matrix: [channelout+64] [output] [value]
   - input(thru) mixer matrix: [channelin] [output] [value]
-  (better do 2 kontrols for seperation ?)
+  (better do 2 kontrols for separation ?)
 */
 
 #define HDSPM_MIXER(xname, xindex) \
diff --git a/sound/soc/codecs/ak4104.c b/sound/soc/codecs/ak4104.c
index b9ef7e45891d..b68d99fb6af0 100644
--- a/sound/soc/codecs/ak4104.c
+++ b/sound/soc/codecs/ak4104.c
@@ -90,12 +90,10 @@ static int ak4104_spi_write(struct snd_soc_codec *codec, unsigned int reg,
 	if (reg >= codec->reg_cache_size)
 		return -EINVAL;
 
-	reg &= AK4104_REG_MASK;
-	reg |= AK4104_WRITE;
-
 	/* only write to the hardware if value has changed */
 	if (cache[reg] != value) {
-		u8 tmp[2] = { reg, value };
+		u8 tmp[2] = { (reg & AK4104_REG_MASK) | AK4104_WRITE, value };
+
 		if (spi_write(spi, tmp, sizeof(tmp))) {
 			dev_err(&spi->dev, "SPI write failed\n");
 			return -EIO;
diff --git a/sound/soc/codecs/wm8990.c b/sound/soc/codecs/wm8990.c
index a54dc77b7f34..056b787b6ee0 100644
--- a/sound/soc/codecs/wm8990.c
+++ b/sound/soc/codecs/wm8990.c
@@ -990,7 +990,7 @@ static int wm8990_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id,
 		reg = snd_soc_read(codec, WM8990_CLOCKING_2);
 		snd_soc_write(codec, WM8990_CLOCKING_2, reg | WM8990_SYSCLK_SRC);
 
-		/* set up N , fractional mode and pre-divisor if neccessary */
+		/* set up N , fractional mode and pre-divisor if necessary */
 		snd_soc_write(codec, WM8990_PLL1, pll_div.n | WM8990_SDM |
 			(pll_div.div2?WM8990_PRESCALE:0));
 		snd_soc_write(codec, WM8990_PLL2, (u8)(pll_div.k>>8));
diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c
index e69397f40f72..9e95e5117c88 100644
--- a/sound/soc/pxa/pxa-ssp.c
+++ b/sound/soc/pxa/pxa-ssp.c
@@ -42,11 +42,14 @@
  * SSP audio private data
  */
 struct ssp_priv {
-	struct ssp_dev dev;
+	struct ssp_device *ssp;
 	unsigned int sysclk;
 	int dai_fmt;
 #ifdef CONFIG_PM
-	struct ssp_state state;
+	uint32_t	cr0;
+	uint32_t	cr1;
+	uint32_t	to;
+	uint32_t	psp;
 #endif
 };
 
@@ -61,6 +64,22 @@ static void dump_registers(struct ssp_device *ssp)
 		 ssp_read_reg(ssp, SSACD));
 }
 
+static void ssp_enable(struct ssp_device *ssp)
+{
+	uint32_t sscr0;
+
+	sscr0 = __raw_readl(ssp->mmio_base + SSCR0) | SSCR0_SSE;
+	__raw_writel(sscr0, ssp->mmio_base + SSCR0);
+}
+
+static void ssp_disable(struct ssp_device *ssp)
+{
+	uint32_t sscr0;
+
+	sscr0 = __raw_readl(ssp->mmio_base + SSCR0) & ~SSCR0_SSE;
+	__raw_writel(sscr0, ssp->mmio_base + SSCR0);
+}
+
 struct pxa2xx_pcm_dma_data {
 	struct pxa2xx_pcm_dma_params params;
 	char name[20];
@@ -94,13 +113,12 @@ static int pxa_ssp_startup(struct snd_pcm_substream *substream,
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
 	struct ssp_priv *priv = cpu_dai->private_data;
+	struct ssp_device *ssp = priv->ssp;
 	int ret = 0;
 
 	if (!cpu_dai->active) {
-		priv->dev.port = cpu_dai->id + 1;
-		priv->dev.irq = NO_IRQ;
-		clk_enable(priv->dev.ssp->clk);
-		ssp_disable(&priv->dev);
+		clk_enable(ssp->clk);
+		ssp_disable(ssp);
 	}
 
 	if (cpu_dai->dma_data) {
@@ -116,10 +134,11 @@ static void pxa_ssp_shutdown(struct snd_pcm_substream *substream,
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
 	struct ssp_priv *priv = cpu_dai->private_data;
+	struct ssp_device *ssp = priv->ssp;
 
 	if (!cpu_dai->active) {
-		ssp_disable(&priv->dev);
-		clk_disable(priv->dev.ssp->clk);
+		ssp_disable(ssp);
+		clk_disable(ssp->clk);
 	}
 
 	if (cpu_dai->dma_data) {
@@ -133,27 +152,39 @@ static void pxa_ssp_shutdown(struct snd_pcm_substream *substream,
 static int pxa_ssp_suspend(struct snd_soc_dai *cpu_dai)
 {
 	struct ssp_priv *priv = cpu_dai->private_data;
+	struct ssp_device *ssp = priv->ssp;
 
 	if (!cpu_dai->active)
-		clk_enable(priv->dev.ssp->clk);
+		clk_enable(ssp->clk);
 
-	ssp_save_state(&priv->dev, &priv->state);
-	clk_disable(priv->dev.ssp->clk);
+	priv->cr0 = __raw_readl(ssp->mmio_base + SSCR0);
+	priv->cr1 = __raw_readl(ssp->mmio_base + SSCR1);
+	priv->to  = __raw_readl(ssp->mmio_base + SSTO);
+	priv->psp = __raw_readl(ssp->mmio_base + SSPSP);
 
+	ssp_disable(ssp);
+	clk_disable(ssp->clk);
 	return 0;
 }
 
 static int pxa_ssp_resume(struct snd_soc_dai *cpu_dai)
 {
 	struct ssp_priv *priv = cpu_dai->private_data;
+	struct ssp_device *ssp = priv->ssp;
+	uint32_t sssr = SSSR_ROR | SSSR_TUR | SSSR_BCE;
+
+	clk_enable(ssp->clk);
 
-	clk_enable(priv->dev.ssp->clk);
-	ssp_restore_state(&priv->dev, &priv->state);
+	__raw_writel(sssr, ssp->mmio_base + SSSR);
+	__raw_writel(priv->cr0 & ~SSCR0_SSE, ssp->mmio_base + SSCR0);
+	__raw_writel(priv->cr1, ssp->mmio_base + SSCR1);
+	__raw_writel(priv->to,  ssp->mmio_base + SSTO);
+	__raw_writel(priv->psp, ssp->mmio_base + SSPSP);
 
 	if (cpu_dai->active)
-		ssp_enable(&priv->dev);
+		ssp_enable(ssp);
 	else
-		clk_disable(priv->dev.ssp->clk);
+		clk_disable(ssp->clk);
 
 	return 0;
 }
@@ -203,7 +234,7 @@ static int pxa_ssp_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
 	int clk_id, unsigned int freq, int dir)
 {
 	struct ssp_priv *priv = cpu_dai->private_data;
-	struct ssp_device *ssp = priv->dev.ssp;
+	struct ssp_device *ssp = priv->ssp;
 	int val;
 
 	u32 sscr0 = ssp_read_reg(ssp, SSCR0) &
@@ -244,11 +275,11 @@ static int pxa_ssp_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
 	/* The SSP clock must be disabled when changing SSP clock mode
 	 * on PXA2xx.  On PXA3xx it must be enabled when doing so. */
 	if (!cpu_is_pxa3xx())
-		clk_disable(priv->dev.ssp->clk);
+		clk_disable(ssp->clk);
 	val = ssp_read_reg(ssp, SSCR0) | sscr0;
 	ssp_write_reg(ssp, SSCR0, val);
 	if (!cpu_is_pxa3xx())
-		clk_enable(priv->dev.ssp->clk);
+		clk_enable(ssp->clk);
 
 	return 0;
 }
@@ -260,7 +291,7 @@ static int pxa_ssp_set_dai_clkdiv(struct snd_soc_dai *cpu_dai,
 	int div_id, int div)
 {
 	struct ssp_priv *priv = cpu_dai->private_data;
-	struct ssp_device *ssp = priv->dev.ssp;
+	struct ssp_device *ssp = priv->ssp;
 	int val;
 
 	switch (div_id) {
@@ -311,7 +342,7 @@ static int pxa_ssp_set_dai_pll(struct snd_soc_dai *cpu_dai, int pll_id,
 	int source, unsigned int freq_in, unsigned int freq_out)
 {
 	struct ssp_priv *priv = cpu_dai->private_data;
-	struct ssp_device *ssp = priv->dev.ssp;
+	struct ssp_device *ssp = priv->ssp;
 	u32 ssacd = ssp_read_reg(ssp, SSACD) & ~0x70;
 
 #if defined(CONFIG_PXA3xx)
@@ -380,7 +411,7 @@ static int pxa_ssp_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai,
 	unsigned int tx_mask, unsigned int rx_mask, int slots, int slot_width)
 {
 	struct ssp_priv *priv = cpu_dai->private_data;
-	struct ssp_device *ssp = priv->dev.ssp;
+	struct ssp_device *ssp = priv->ssp;
 	u32 sscr0;
 
 	sscr0 = ssp_read_reg(ssp, SSCR0);
@@ -415,7 +446,7 @@ static int pxa_ssp_set_dai_tristate(struct snd_soc_dai *cpu_dai,
 	int tristate)
 {
 	struct ssp_priv *priv = cpu_dai->private_data;
-	struct ssp_device *ssp = priv->dev.ssp;
+	struct ssp_device *ssp = priv->ssp;
 	u32 sscr1;
 
 	sscr1 = ssp_read_reg(ssp, SSCR1);
@@ -437,7 +468,7 @@ static int pxa_ssp_set_dai_fmt(struct snd_soc_dai *cpu_dai,
 		unsigned int fmt)
 {
 	struct ssp_priv *priv = cpu_dai->private_data;
-	struct ssp_device *ssp = priv->dev.ssp;
+	struct ssp_device *ssp = priv->ssp;
 	u32 sscr0;
 	u32 sscr1;
 	u32 sspsp;
@@ -532,7 +563,7 @@ static int pxa_ssp_hw_params(struct snd_pcm_substream *substream,
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
 	struct ssp_priv *priv = cpu_dai->private_data;
-	struct ssp_device *ssp = priv->dev.ssp;
+	struct ssp_device *ssp = priv->ssp;
 	int chn = params_channels(params);
 	u32 sscr0;
 	u32 sspsp;
@@ -642,12 +673,12 @@ static int pxa_ssp_trigger(struct snd_pcm_substream *substream, int cmd,
 	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
 	int ret = 0;
 	struct ssp_priv *priv = cpu_dai->private_data;
-	struct ssp_device *ssp = priv->dev.ssp;
+	struct ssp_device *ssp = priv->ssp;
 	int val;
 
 	switch (cmd) {
 	case SNDRV_PCM_TRIGGER_RESUME:
-		ssp_enable(&priv->dev);
+		ssp_enable(ssp);
 		break;
 	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
 		val = ssp_read_reg(ssp, SSCR1);
@@ -666,7 +697,7 @@ static int pxa_ssp_trigger(struct snd_pcm_substream *substream, int cmd,
 		else
 			val |= SSCR1_RSRE;
 		ssp_write_reg(ssp, SSCR1, val);
-		ssp_enable(&priv->dev);
+		ssp_enable(ssp);
 		break;
 	case SNDRV_PCM_TRIGGER_STOP:
 		val = ssp_read_reg(ssp, SSCR1);
@@ -677,7 +708,7 @@ static int pxa_ssp_trigger(struct snd_pcm_substream *substream, int cmd,
 		ssp_write_reg(ssp, SSCR1, val);
 		break;
 	case SNDRV_PCM_TRIGGER_SUSPEND:
-		ssp_disable(&priv->dev);
+		ssp_disable(ssp);
 		break;
 	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
 		val = ssp_read_reg(ssp, SSCR1);
@@ -707,8 +738,8 @@ static int pxa_ssp_probe(struct platform_device *pdev,
 	if (!priv)
 		return -ENOMEM;
 
-	priv->dev.ssp = ssp_request(dai->id + 1, "SoC audio");
-	if (priv->dev.ssp == NULL) {
+	priv->ssp = ssp_request(dai->id + 1, "SoC audio");
+	if (priv->ssp == NULL) {
 		ret = -ENODEV;
 		goto err_priv;
 	}
@@ -727,7 +758,7 @@ static void pxa_ssp_remove(struct platform_device *pdev,
 			      struct snd_soc_dai *dai)
 {
 	struct ssp_priv *priv = dai->private_data;
-	ssp_free(priv->dev.ssp);
+	ssp_free(priv->ssp);
 }
 
 #define PXA_SSP_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\
diff --git a/sound/soc/s3c24xx/s3c64xx-i2s.c b/sound/soc/s3c24xx/s3c64xx-i2s.c
index 93ed3aad1631..a72c251401ac 100644
--- a/sound/soc/s3c24xx/s3c64xx-i2s.c
+++ b/sound/soc/s3c24xx/s3c64xx-i2s.c
@@ -22,8 +22,8 @@
 #include <sound/soc.h>
 
 #include <plat/regs-s3c2412-iis.h>
-#include <plat/gpio-bank-d.h>
-#include <plat/gpio-bank-e.h>
+#include <mach/gpio-bank-d.h>
+#include <mach/gpio-bank-e.h>
 #include <plat/gpio-cfg.h>
 
 #include <mach/map.h>
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index a03bac943aaf..c8b0556ef431 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -427,24 +427,24 @@ static int soc_pcm_open(struct snd_pcm_substream *substream)
 	if (!runtime->hw.rates) {
 		printk(KERN_ERR "asoc: %s <-> %s No matching rates\n",
 			codec_dai->name, cpu_dai->name);
-		goto machine_err;
+		goto config_err;
 	}
 	if (!runtime->hw.formats) {
 		printk(KERN_ERR "asoc: %s <-> %s No matching formats\n",
 			codec_dai->name, cpu_dai->name);
-		goto machine_err;
+		goto config_err;
 	}
 	if (!runtime->hw.channels_min || !runtime->hw.channels_max) {
 		printk(KERN_ERR "asoc: %s <-> %s No matching channels\n",
 			codec_dai->name, cpu_dai->name);
-		goto machine_err;
+		goto config_err;
 	}
 
 	/* Symmetry only applies if we've already got an active stream. */
 	if (cpu_dai->active || codec_dai->active) {
 		ret = soc_pcm_apply_symmetry(substream);
 		if (ret != 0)
-			goto machine_err;
+			goto config_err;
 	}
 
 	pr_debug("asoc: %s <-> %s info:\n", codec_dai->name, cpu_dai->name);
@@ -464,10 +464,14 @@ static int soc_pcm_open(struct snd_pcm_substream *substream)
 	mutex_unlock(&pcm_mutex);
 	return 0;
 
-machine_err:
+config_err:
 	if (machine->ops && machine->ops->shutdown)
 		machine->ops->shutdown(substream);
 
+machine_err:
+	if (codec_dai->ops->shutdown)
+		codec_dai->ops->shutdown(substream, codec_dai);
+
 codec_dai_err:
 	if (platform->pcm_ops->close)
 		platform->pcm_ops->close(substream);
diff --git a/sound/usb/Kconfig b/sound/usb/Kconfig
index 8c2925814ce4..c570ae3e6d55 100644
--- a/sound/usb/Kconfig
+++ b/sound/usb/Kconfig
@@ -22,13 +22,13 @@ config SND_USB_AUDIO
 	  will be called snd-usb-audio.
 
 config SND_USB_UA101
-	tristate "Edirol UA-101 driver (EXPERIMENTAL)"
+	tristate "Edirol UA-101/UA-1000 driver (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
 	select SND_PCM
 	select SND_RAWMIDI
 	help
-	  Say Y here to include support for the Edirol UA-101 audio/MIDI
-	  interface.
+	  Say Y here to include support for the Edirol UA-101 and UA-1000
+	  audio/MIDI interfaces.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called snd-ua101.
diff --git a/sound/usb/caiaq/midi.h b/sound/usb/caiaq/midi.h
index 9d16db027fc3..380f984babc9 100644
--- a/sound/usb/caiaq/midi.h
+++ b/sound/usb/caiaq/midi.h
@@ -3,6 +3,6 @@
 
 int snd_usb_caiaq_midi_init(struct snd_usb_caiaqdev *dev);
 void snd_usb_caiaq_midi_handle_input(struct snd_usb_caiaqdev *dev, int port, const char *buf, int len);
-void snd_usb_caiaq_midi_output_done(struct urb* urb);
+void snd_usb_caiaq_midi_output_done(struct urb *urb);
 
 #endif /* CAIAQ_MIDI_H */
diff --git a/sound/usb/ua101.c b/sound/usb/ua101.c
index 4f4ccdf70dd0..3d458d3b9962 100644
--- a/sound/usb/ua101.c
+++ b/sound/usb/ua101.c
@@ -1,5 +1,5 @@
 /*
- * Edirol UA-101 driver
+ * Edirol UA-101/UA-1000 driver
  * Copyright (c) Clemens Ladisch <clemens@ladisch.de>
  *
  * This driver is free software: you can redistribute it and/or modify
@@ -25,13 +25,10 @@
 #include <sound/pcm_params.h>
 #include "usbaudio.h"
 
-MODULE_DESCRIPTION("Edirol UA-101 driver");
+MODULE_DESCRIPTION("Edirol UA-101/1000 driver");
 MODULE_AUTHOR("Clemens Ladisch <clemens@ladisch.de>");
 MODULE_LICENSE("GPL v2");
-MODULE_SUPPORTED_DEVICE("{{Edirol,UA-101}}");
-
-/* I use my UA-1A for testing because I don't have a UA-101 ... */
-#define UA1A_HACK
+MODULE_SUPPORTED_DEVICE("{{Edirol,UA-101},{Edirol,UA-1000}}");
 
 /*
  * Should not be lower than the minimum scheduling delay of the host
@@ -132,9 +129,6 @@ struct ua101 {
 			dma_addr_t dma;
 		} buffers[MAX_MEMORY_BUFFERS];
 	} capture, playback;
-
-	unsigned int fps[10];
-	unsigned int frame_counter;
 };
 
 static DEFINE_MUTEX(devices_mutex);
@@ -424,16 +418,6 @@ static void capture_urb_complete(struct urb *urb)
 	if (do_period_elapsed)
 		snd_pcm_period_elapsed(stream->substream);
 
-	/* for debugging: measure the sample rate relative to the USB clock */
-	ua->fps[ua->frame_counter++ / ua->packets_per_second] += frames;
-	if (ua->frame_counter >= ARRAY_SIZE(ua->fps) * ua->packets_per_second) {
-		printk(KERN_DEBUG "capture rate:");
-		for (frames = 0; frames < ARRAY_SIZE(ua->fps); ++frames)
-			printk(KERN_CONT " %u", ua->fps[frames]);
-		printk(KERN_CONT "\n");
-		memset(ua->fps, 0, sizeof(ua->fps));
-		ua->frame_counter = 0;
-	}
 	return;
 
 stream_stopped:
@@ -1200,13 +1184,30 @@ static int ua101_probe(struct usb_interface *interface,
 		.type = QUIRK_MIDI_FIXED_ENDPOINT,
 		.data = &midi_ep
 	};
+	static const int intf_numbers[2][3] = {
+		{	/* UA-101 */
+			[INTF_PLAYBACK] = 0,
+			[INTF_CAPTURE] = 1,
+			[INTF_MIDI] = 2,
+		},
+		{	/* UA-1000 */
+			[INTF_CAPTURE] = 1,
+			[INTF_PLAYBACK] = 2,
+			[INTF_MIDI] = 3,
+		},
+	};
 	struct snd_card *card;
 	struct ua101 *ua;
 	unsigned int card_index, i;
+	int is_ua1000;
+	const char *name;
 	char usb_path[32];
 	int err;
 
-	if (interface->altsetting->desc.bInterfaceNumber != 0)
+	is_ua1000 = usb_id->idProduct == 0x0044;
+
+	if (interface->altsetting->desc.bInterfaceNumber !=
+	    intf_numbers[is_ua1000][0])
 		return -ENODEV;
 
 	mutex_lock(&devices_mutex);
@@ -1239,20 +1240,13 @@ static int ua101_probe(struct usb_interface *interface,
 	init_waitqueue_head(&ua->rate_feedback_wait);
 	init_waitqueue_head(&ua->alsa_playback_wait);
 
-#ifdef UA1A_HACK
-	if (ua->dev->descriptor.idProduct == cpu_to_le16(0x0018)) {
-		ua->intf[2] = interface;
-		ua->intf[0] = usb_ifnum_to_if(ua->dev, 1);
-		ua->intf[1] = usb_ifnum_to_if(ua->dev, 2);
-		usb_driver_claim_interface(&ua101_driver, ua->intf[0], ua);
-		usb_driver_claim_interface(&ua101_driver, ua->intf[1], ua);
-	} else {
-#endif
 	ua->intf[0] = interface;
 	for (i = 1; i < ARRAY_SIZE(ua->intf); ++i) {
-		ua->intf[i] = usb_ifnum_to_if(ua->dev, i);
+		ua->intf[i] = usb_ifnum_to_if(ua->dev,
+					      intf_numbers[is_ua1000][i]);
 		if (!ua->intf[i]) {
-			dev_err(&ua->dev->dev, "interface %u not found\n", i);
+			dev_err(&ua->dev->dev, "interface %u not found\n",
+				intf_numbers[is_ua1000][i]);
 			err = -ENXIO;
 			goto probe_error;
 		}
@@ -1264,39 +1258,19 @@ static int ua101_probe(struct usb_interface *interface,
 			goto probe_error;
 		}
 	}
-#ifdef UA1A_HACK
-	}
-#endif
 
 	snd_card_set_dev(card, &interface->dev);
 
-#ifdef UA1A_HACK
-	if (ua->dev->descriptor.idProduct == cpu_to_le16(0x0018)) {
-		ua->format_bit = SNDRV_PCM_FMTBIT_S16_LE;
-		ua->rate = 44100;
-		ua->packets_per_second = 1000;
-		ua->capture.channels = 2;
-		ua->playback.channels = 2;
-		ua->capture.frame_bytes = 4;
-		ua->playback.frame_bytes = 4;
-		ua->capture.usb_pipe = usb_rcvisocpipe(ua->dev, 2);
-		ua->playback.usb_pipe = usb_sndisocpipe(ua->dev, 1);
-		ua->capture.max_packet_bytes = 192;
-		ua->playback.max_packet_bytes = 192;
-	} else {
-#endif
 	err = detect_usb_format(ua);
 	if (err < 0)
 		goto probe_error;
-#ifdef UA1A_HACK
-	}
-#endif
 
+	name = usb_id->idProduct == 0x0044 ? "UA-1000" : "UA-101";
 	strcpy(card->driver, "UA-101");
-	strcpy(card->shortname, "UA-101");
+	strcpy(card->shortname, name);
 	usb_make_path(ua->dev, usb_path, sizeof(usb_path));
 	snprintf(ua->card->longname, sizeof(ua->card->longname),
-		 "EDIROL UA-101 (serial %s), %u Hz at %s, %s speed",
+		 "EDIROL %s (serial %s), %u Hz at %s, %s speed", name,
 		 ua->dev->serial ? ua->dev->serial : "?", ua->rate, usb_path,
 		 ua->dev->speed == USB_SPEED_HIGH ? "high" : "full");
 
@@ -1314,24 +1288,18 @@ static int ua101_probe(struct usb_interface *interface,
 	if (err < 0)
 		goto probe_error;
 
-	err = snd_pcm_new(card, "UA-101", 0, 1, 1, &ua->pcm);
+	err = snd_pcm_new(card, name, 0, 1, 1, &ua->pcm);
 	if (err < 0)
 		goto probe_error;
 	ua->pcm->private_data = ua;
-	strcpy(ua->pcm->name, "UA-101");
+	strcpy(ua->pcm->name, name);
 	snd_pcm_set_ops(ua->pcm, SNDRV_PCM_STREAM_PLAYBACK, &playback_pcm_ops);
 	snd_pcm_set_ops(ua->pcm, SNDRV_PCM_STREAM_CAPTURE, &capture_pcm_ops);
 
-#ifdef UA1A_HACK
-	if (ua->dev->descriptor.idProduct != cpu_to_le16(0x0018)) {
-#endif
 	err = snd_usbmidi_create(card, ua->intf[INTF_MIDI],
 				 &ua->midi_list, &midi_quirk);
 	if (err < 0)
 		goto probe_error;
-#ifdef UA1A_HACK
-	}
-#endif
 
 	err = snd_card_register(card);
 	if (err < 0)
@@ -1386,11 +1354,9 @@ static void ua101_disconnect(struct usb_interface *interface)
 }
 
 static struct usb_device_id ua101_ids[] = {
-#ifdef UA1A_HACK
-	{ USB_DEVICE(0x0582, 0x0018) },
-#endif
-	{ USB_DEVICE(0x0582, 0x007d) },
-	{ USB_DEVICE(0x0582, 0x008d) },
+	{ USB_DEVICE(0x0582, 0x0044) }, /* UA-1000 high speed */
+	{ USB_DEVICE(0x0582, 0x007d) }, /* UA-101 high speed */
+	{ USB_DEVICE(0x0582, 0x008d) }, /* UA-101 full speed */
 	{ }
 };
 MODULE_DEVICE_TABLE(usb, ua101_ids);
diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c
index c539f7fe292f..11b0826b8fe6 100644
--- a/sound/usb/usbaudio.c
+++ b/sound/usb/usbaudio.c
@@ -2483,7 +2483,6 @@ static int parse_audio_format_i_type(struct snd_usb_audio *chip,
 				   sample_width, sample_bytes);
 		}
 		/* check the format byte size */
-		printk(" XXXXX SAMPLE BYTES %d\n", sample_bytes);
 		switch (sample_bytes) {
 		case 1:
 			pcm_format = SNDRV_PCM_FORMAT_S8;
@@ -2581,6 +2580,9 @@ static int parse_audio_format_rates_v1(struct snd_usb_audio *chip, struct audiof
 			     chip->usb_id == USB_ID(0x0d8c, 0x0102)) &&
 			    fp->altsetting == 5 && fp->maxpacksize == 392)
 				rate = 96000;
+			/* Creative VF0470 Live Cam reports 16 kHz instead of 8kHz */
+			if (rate == 16000 && chip->usb_id == USB_ID(0x041e, 0x4068))
+				rate = 8000;
 			fp->rate_table[fp->nr_rates] = rate;
 			if (!fp->rate_min || rate < fp->rate_min)
 				fp->rate_min = rate;
@@ -3386,58 +3388,6 @@ static int create_uaxx_quirk(struct snd_usb_audio *chip,
 	return 0;
 }
 
-/*
- * Create a stream for an Edirol UA-1000 interface.
- */
-static int create_ua1000_quirk(struct snd_usb_audio *chip,
-			       struct usb_interface *iface,
-			       const struct snd_usb_audio_quirk *quirk)
-{
-	static const struct audioformat ua1000_format = {
-		.format = SNDRV_PCM_FORMAT_S32_LE,
-		.fmt_type = UAC_FORMAT_TYPE_I,
-		.altsetting = 1,
-		.altset_idx = 1,
-		.attributes = 0,
-		.rates = SNDRV_PCM_RATE_CONTINUOUS,
-	};
-	struct usb_host_interface *alts;
-	struct usb_interface_descriptor *altsd;
-	struct audioformat *fp;
-	int stream, err;
-
-	if (iface->num_altsetting != 2)
-		return -ENXIO;
-	alts = &iface->altsetting[1];
-	altsd = get_iface_desc(alts);
-	if (alts->extralen != 11 || alts->extra[1] != USB_DT_CS_INTERFACE ||
-	    altsd->bNumEndpoints != 1)
-		return -ENXIO;
-
-	fp = kmemdup(&ua1000_format, sizeof(*fp), GFP_KERNEL);
-	if (!fp)
-		return -ENOMEM;
-
-	fp->channels = alts->extra[4];
-	fp->iface = altsd->bInterfaceNumber;
-	fp->endpoint = get_endpoint(alts, 0)->bEndpointAddress;
-	fp->ep_attr = get_endpoint(alts, 0)->bmAttributes;
-	fp->datainterval = parse_datainterval(chip, alts);
-	fp->maxpacksize = le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize);
-	fp->rate_max = fp->rate_min = combine_triple(&alts->extra[8]);
-
-	stream = (fp->endpoint & USB_DIR_IN)
-		? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK;
-	err = add_audio_endpoint(chip, stream, fp);
-	if (err < 0) {
-		kfree(fp);
-		return err;
-	}
-	/* FIXME: playback must be synchronized to capture */
-	usb_set_interface(chip->dev, fp->iface, 0);
-	return 0;
-}
-
 static int snd_usb_create_quirk(struct snd_usb_audio *chip,
 				struct usb_interface *iface,
 				const struct snd_usb_audio_quirk *quirk);
@@ -3686,7 +3636,6 @@ static int snd_usb_create_quirk(struct snd_usb_audio *chip,
 		[QUIRK_MIDI_CME] = create_any_midi_quirk,
 		[QUIRK_AUDIO_STANDARD_INTERFACE] = create_standard_audio_quirk,
 		[QUIRK_AUDIO_FIXED_ENDPOINT] = create_fixed_stream_quirk,
-		[QUIRK_AUDIO_EDIROL_UA1000] = create_ua1000_quirk,
 		[QUIRK_AUDIO_EDIROL_UAXX] = create_uaxx_quirk,
 		[QUIRK_AUDIO_ALIGN_TRANSFER] = create_align_transfer_quirk
 	};
diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h
index 6b016d4aac6b..42c299cbf63a 100644
--- a/sound/usb/usbaudio.h
+++ b/sound/usb/usbaudio.h
@@ -75,7 +75,6 @@ enum quirk_type {
 	QUIRK_MIDI_US122L,
 	QUIRK_AUDIO_STANDARD_INTERFACE,
 	QUIRK_AUDIO_FIXED_ENDPOINT,
-	QUIRK_AUDIO_EDIROL_UA1000,
 	QUIRK_AUDIO_EDIROL_UAXX,
 	QUIRK_AUDIO_ALIGN_TRANSFER,
 
@@ -112,7 +111,7 @@ struct snd_usb_midi_endpoint_info {
 
 /* for QUIRK_AUDIO/MIDI_STANDARD_INTERFACE, data is NULL */
 
-/* for QUIRK_AUDIO_EDIROL_UA700_UA25/UA1000, data is NULL */
+/* for QUIRK_AUDIO_EDIROL_UAXX, data is NULL */
 
 /* for QUIRK_IGNORE_INTERFACE, data is NULL */
 
diff --git a/sound/usb/usbquirks.h b/sound/usb/usbquirks.h
index f06faf7917b9..2b426c1fd0e8 100644
--- a/sound/usb/usbquirks.h
+++ b/sound/usb/usbquirks.h
@@ -1016,36 +1016,6 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	}
 },
 {
-	USB_DEVICE(0x0582, 0x0044),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
-		.vendor_name = "Roland",
-		.product_name = "UA-1000",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
-			{
-				.ifnum = 1,
-				.type = QUIRK_AUDIO_EDIROL_UA1000
-			},
-			{
-				.ifnum = 2,
-				.type = QUIRK_AUDIO_EDIROL_UA1000
-			},
-			{
-				.ifnum = 3,
-				.type = QUIRK_MIDI_FIXED_ENDPOINT,
-				.data = & (const struct snd_usb_midi_endpoint_info) {
-					.out_cables = 0x0003,
-					.in_cables  = 0x0003
-				}
-			},
-			{
-				.ifnum = -1
-			}
-		}
-	}
-},
-{
 	/* has ID 0x0049 when not in "Advanced Driver" mode */
 	USB_DEVICE(0x0582, 0x0047),
 	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
diff --git a/tools/perf/Documentation/Makefile b/tools/perf/Documentation/Makefile
index bdd3b7ecad0a..bd498d496952 100644
--- a/tools/perf/Documentation/Makefile
+++ b/tools/perf/Documentation/Makefile
@@ -24,7 +24,10 @@ DOC_MAN1=$(patsubst %.txt,%.1,$(MAN1_TXT))
 DOC_MAN5=$(patsubst %.txt,%.5,$(MAN5_TXT))
 DOC_MAN7=$(patsubst %.txt,%.7,$(MAN7_TXT))
 
+# Make the path relative to DESTDIR, not prefix
+ifndef DESTDIR
 prefix?=$(HOME)
+endif
 bindir?=$(prefix)/bin
 htmldir?=$(prefix)/share/doc/perf-doc
 pdfdir?=$(prefix)/share/doc/perf-doc
@@ -32,7 +35,6 @@ mandir?=$(prefix)/share/man
 man1dir=$(mandir)/man1
 man5dir=$(mandir)/man5
 man7dir=$(mandir)/man7
-# DESTDIR=
 
 ASCIIDOC=asciidoc
 ASCIIDOC_EXTRA = --unsafe
diff --git a/tools/perf/Documentation/perf-lock.txt b/tools/perf/Documentation/perf-lock.txt
new file mode 100644
index 000000000000..b317102138c8
--- /dev/null
+++ b/tools/perf/Documentation/perf-lock.txt
@@ -0,0 +1,29 @@
+perf-lock(1)
+============
+
+NAME
+----
+perf-lock - Analyze lock events
+
+SYNOPSIS
+--------
+[verse]
+'perf lock' {record|report|trace}
+
+DESCRIPTION
+-----------
+You can analyze various lock behaviours
+and statistics with this 'perf lock' command.
+
+  'perf lock record <command>' records lock events
+  between start and end <command>. And this command
+  produces the file "perf.data" which contains tracing
+  results of lock events.
+
+  'perf lock trace' shows raw lock events.
+
+  'perf lock report' reports statistical data.
+
+SEE ALSO
+--------
+linkperf:perf[1]
diff --git a/tools/perf/Makefile b/tools/perf/Makefile
index 2d537382c686..8a8f52db7e38 100644
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -216,7 +216,10 @@ STRIP ?= strip
 # runtime figures out where they are based on the path to the executable.
 # This can help installing the suite in a relocatable way.
 
+# Make the path relative to DESTDIR, not to prefix
+ifndef DESTDIR
 prefix = $(HOME)
+endif
 bindir_relative = bin
 bindir = $(prefix)/$(bindir_relative)
 mandir = share/man
@@ -233,7 +236,6 @@ sysconfdir = $(prefix)/etc
 ETC_PERFCONFIG = etc/perfconfig
 endif
 lib = lib
-# DESTDIR=
 
 export prefix bindir sharedir sysconfdir
 
@@ -387,6 +389,7 @@ LIB_H += util/thread.h
 LIB_H += util/trace-event.h
 LIB_H += util/probe-finder.h
 LIB_H += util/probe-event.h
+LIB_H += util/cpumap.h
 
 LIB_OBJS += util/abspath.o
 LIB_OBJS += util/alias.o
@@ -433,6 +436,7 @@ LIB_OBJS += util/sort.o
 LIB_OBJS += util/hist.o
 LIB_OBJS += util/probe-event.o
 LIB_OBJS += util/util.o
+LIB_OBJS += util/cpumap.o
 
 BUILTIN_OBJS += builtin-annotate.o
 
diff --git a/tools/perf/builtin-annotate.c b/tools/perf/builtin-annotate.c
index 5ec5de995872..6ad7148451c5 100644
--- a/tools/perf/builtin-annotate.c
+++ b/tools/perf/builtin-annotate.c
@@ -116,7 +116,7 @@ static int perf_session__add_hist_entry(struct perf_session *self,
 		return 0;
 	}
 
-	he = __perf_session__add_hist_entry(self, al, NULL, count, &hit);
+	he = __perf_session__add_hist_entry(&self->hists, al, NULL, count, &hit);
 	if (he == NULL)
 		return -ENOMEM;
 
@@ -564,8 +564,8 @@ static int __cmd_annotate(void)
 	if (verbose > 2)
 		dsos__fprintf(stdout);
 
-	perf_session__collapse_resort(session);
-	perf_session__output_resort(session, session->event_total[0]);
+	perf_session__collapse_resort(&session->hists);
+	perf_session__output_resort(&session->hists, session->event_total[0]);
 	perf_session__find_annotations(session);
 out_delete:
 	perf_session__delete(session);
diff --git a/tools/perf/builtin-diff.c b/tools/perf/builtin-diff.c
index 18b3f505f9db..1ea15d8aeed1 100644
--- a/tools/perf/builtin-diff.c
+++ b/tools/perf/builtin-diff.c
@@ -26,7 +26,8 @@ static int perf_session__add_hist_entry(struct perf_session *self,
 					struct addr_location *al, u64 count)
 {
 	bool hit;
-	struct hist_entry *he = __perf_session__add_hist_entry(self, al, NULL,
+	struct hist_entry *he = __perf_session__add_hist_entry(&self->hists,
+							       al, NULL,
 							       count, &hit);
 	if (he == NULL)
 		return -ENOMEM;
@@ -114,7 +115,7 @@ static void perf_session__resort_hist_entries(struct perf_session *self)
 
 static void perf_session__set_hist_entries_positions(struct perf_session *self)
 {
-	perf_session__output_resort(self, self->events_stats.total);
+	perf_session__output_resort(&self->hists, self->events_stats.total);
 	perf_session__resort_hist_entries(self);
 }
 
@@ -166,13 +167,15 @@ static int __cmd_diff(void)
 			goto out_delete;
 	}
 
-	perf_session__output_resort(session[1], session[1]->events_stats.total);
+	perf_session__output_resort(&session[1]->hists,
+				    session[1]->events_stats.total);
 	if (show_displacement)
 		perf_session__set_hist_entries_positions(session[0]);
 
 	perf_session__match_hists(session[0], session[1]);
-	perf_session__fprintf_hists(session[1], session[0],
-				    show_displacement, stdout);
+	perf_session__fprintf_hists(&session[1]->hists, session[0],
+				    show_displacement, stdout,
+				    session[1]->events_stats.total);
 out_delete:
 	for (i = 0; i < 2; ++i)
 		perf_session__delete(session[i]);
diff --git a/tools/perf/builtin-lock.c b/tools/perf/builtin-lock.c
index fb9ab2ad3f92..e12c844df1e2 100644
--- a/tools/perf/builtin-lock.c
+++ b/tools/perf/builtin-lock.c
@@ -460,6 +460,150 @@ process_raw_event(void *data, int cpu,
 		process_lock_release_event(data, event, cpu, timestamp, thread);
 }
 
+struct raw_event_queue {
+	u64			timestamp;
+	int			cpu;
+	void			*data;
+	struct thread		*thread;
+	struct list_head	list;
+};
+
+static LIST_HEAD(raw_event_head);
+
+#define FLUSH_PERIOD	(5 * NSEC_PER_SEC)
+
+static u64 flush_limit = ULLONG_MAX;
+static u64 last_flush = 0;
+struct raw_event_queue *last_inserted;
+
+static void flush_raw_event_queue(u64 limit)
+{
+	struct raw_event_queue *tmp, *iter;
+
+	list_for_each_entry_safe(iter, tmp, &raw_event_head, list) {
+		if (iter->timestamp > limit)
+			return;
+
+		if (iter == last_inserted)
+			last_inserted = NULL;
+
+		process_raw_event(iter->data, iter->cpu, iter->timestamp,
+				  iter->thread);
+
+		last_flush = iter->timestamp;
+		list_del(&iter->list);
+		free(iter->data);
+		free(iter);
+	}
+}
+
+static void __queue_raw_event_end(struct raw_event_queue *new)
+{
+	struct raw_event_queue *iter;
+
+	list_for_each_entry_reverse(iter, &raw_event_head, list) {
+		if (iter->timestamp < new->timestamp) {
+			list_add(&new->list, &iter->list);
+			return;
+		}
+	}
+
+	list_add(&new->list, &raw_event_head);
+}
+
+static void __queue_raw_event_before(struct raw_event_queue *new,
+				     struct raw_event_queue *iter)
+{
+	list_for_each_entry_continue_reverse(iter, &raw_event_head, list) {
+		if (iter->timestamp < new->timestamp) {
+			list_add(&new->list, &iter->list);
+			return;
+		}
+	}
+
+	list_add(&new->list, &raw_event_head);
+}
+
+static void __queue_raw_event_after(struct raw_event_queue *new,
+				     struct raw_event_queue *iter)
+{
+	list_for_each_entry_continue(iter, &raw_event_head, list) {
+		if (iter->timestamp > new->timestamp) {
+			list_add_tail(&new->list, &iter->list);
+			return;
+		}
+	}
+	list_add_tail(&new->list, &raw_event_head);
+}
+
+/* The queue is ordered by time */
+static void __queue_raw_event(struct raw_event_queue *new)
+{
+	if (!last_inserted) {
+		__queue_raw_event_end(new);
+		return;
+	}
+
+	/*
+	 * Most of the time the current event has a timestamp
+	 * very close to the last event inserted, unless we just switched
+	 * to another event buffer. Having a sorting based on a list and
+	 * on the last inserted event that is close to the current one is
+	 * probably more efficient than an rbtree based sorting.
+	 */
+	if (last_inserted->timestamp >= new->timestamp)
+		__queue_raw_event_before(new, last_inserted);
+	else
+		__queue_raw_event_after(new, last_inserted);
+}
+
+static void queue_raw_event(void *data, int raw_size, int cpu,
+			    u64 timestamp, struct thread *thread)
+{
+	struct raw_event_queue *new;
+
+	if (flush_limit == ULLONG_MAX)
+		flush_limit = timestamp + FLUSH_PERIOD;
+
+	if (timestamp < last_flush) {
+		printf("Warning: Timestamp below last timeslice flush\n");
+		return;
+	}
+
+	new = malloc(sizeof(*new));
+	if (!new)
+		die("Not enough memory\n");
+
+	new->timestamp = timestamp;
+	new->cpu = cpu;
+	new->thread = thread;
+
+	new->data = malloc(raw_size);
+	if (!new->data)
+		die("Not enough memory\n");
+
+	memcpy(new->data, data, raw_size);
+
+	__queue_raw_event(new);
+	last_inserted = new;
+
+	/*
+	 * We want to have a slice of events covering 2 * FLUSH_PERIOD
+	 * If FLUSH_PERIOD is big enough, it ensures every events that occured
+	 * in the first half of the timeslice have all been buffered and there
+	 * are none remaining (we need that because of the weakly ordered
+	 * event recording we have). Then once we reach the 2 * FLUSH_PERIOD
+	 * timeslice, we flush the first half to be gentle with the memory
+	 * (the second half can still get new events in the middle, so wait
+	 * another period to flush it)
+	 */
+	if (new->timestamp > flush_limit &&
+		new->timestamp - flush_limit > FLUSH_PERIOD) {
+		flush_limit += FLUSH_PERIOD;
+		flush_raw_event_queue(flush_limit);
+	}
+}
+
 static int process_sample_event(event_t *event, struct perf_session *session)
 {
 	struct thread *thread;
@@ -480,7 +624,7 @@ static int process_sample_event(event_t *event, struct perf_session *session)
 	if (profile_cpu != -1 && profile_cpu != (int) data.cpu)
 		return 0;
 
-	process_raw_event(data.raw_data, data.cpu, data.time, thread);
+	queue_raw_event(data.raw_data, data.raw_size, data.cpu, data.time, thread);
 
 	return 0;
 }
@@ -576,6 +720,7 @@ static void __cmd_report(void)
 	setup_pager();
 	select_key();
 	read_events();
+	flush_raw_event_queue(ULLONG_MAX);
 	sort_result();
 	print_result();
 }
@@ -608,7 +753,6 @@ static const char *record_args[] = {
 	"record",
 	"-a",
 	"-R",
-	"-M",
 	"-f",
 	"-m", "1024",
 	"-c", "1",
diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index 771533ced6a8..3b8b6387c47c 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -22,6 +22,7 @@
 #include "util/debug.h"
 #include "util/session.h"
 #include "util/symbol.h"
+#include "util/cpumap.h"
 
 #include <unistd.h>
 #include <sched.h>
@@ -244,6 +245,9 @@ static void create_counter(int counter, int cpu, pid_t pid)
 
 	attr->sample_type	|= PERF_SAMPLE_IP | PERF_SAMPLE_TID;
 
+	if (nr_counters > 1)
+		attr->sample_type |= PERF_SAMPLE_ID;
+
 	if (freq) {
 		attr->sample_type	|= PERF_SAMPLE_PERIOD;
 		attr->freq		= 1;
@@ -391,6 +395,9 @@ static int process_buildids(void)
 {
 	u64 size = lseek(output, 0, SEEK_CUR);
 
+	if (size == 0)
+		return 0;
+
 	session->fd = output;
 	return __perf_session__process_events(session, post_processing_offset,
 					      size - post_processing_offset,
@@ -418,9 +425,6 @@ static int __cmd_record(int argc, const char **argv)
 	char buf;
 
 	page_size = sysconf(_SC_PAGE_SIZE);
-	nr_cpus = sysconf(_SC_NPROCESSORS_ONLN);
-	assert(nr_cpus <= MAX_NR_CPUS);
-	assert(nr_cpus >= 0);
 
 	atexit(sig_atexit);
 	signal(SIGCHLD, sig_handler);
@@ -544,8 +548,9 @@ static int __cmd_record(int argc, const char **argv)
 	if ((!system_wide && !inherit) || profile_cpu != -1) {
 		open_counters(profile_cpu, target_pid);
 	} else {
+		nr_cpus = read_cpu_map();
 		for (i = 0; i < nr_cpus; i++)
-			open_counters(i, target_pid);
+			open_counters(cpumap[i], target_pid);
 	}
 
 	if (file_new) {
diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c
index cfc655d40bb7..f815de25d0fc 100644
--- a/tools/perf/builtin-report.c
+++ b/tools/perf/builtin-report.c
@@ -45,28 +45,71 @@ static char		*pretty_printing_style = default_pretty_printing_style;
 
 static char		callchain_default_opt[] = "fractal,0.5";
 
+static struct event_stat_id *get_stats(struct perf_session *self,
+				       u64 event_stream, u32 type, u64 config)
+{
+	struct rb_node **p = &self->stats_by_id.rb_node;
+	struct rb_node *parent = NULL;
+	struct event_stat_id *iter, *new;
+
+	while (*p != NULL) {
+		parent = *p;
+		iter = rb_entry(parent, struct event_stat_id, rb_node);
+		if (iter->config == config)
+			return iter;
+
+
+		if (config > iter->config)
+			p = &(*p)->rb_right;
+		else
+			p = &(*p)->rb_left;
+	}
+
+	new = malloc(sizeof(struct event_stat_id));
+	if (new == NULL)
+		return NULL;
+	memset(new, 0, sizeof(struct event_stat_id));
+	new->event_stream = event_stream;
+	new->config = config;
+	new->type = type;
+	rb_link_node(&new->rb_node, parent, p);
+	rb_insert_color(&new->rb_node, &self->stats_by_id);
+	return new;
+}
+
 static int perf_session__add_hist_entry(struct perf_session *self,
 					struct addr_location *al,
-					struct ip_callchain *chain, u64 count)
+					struct sample_data *data)
 {
 	struct symbol **syms = NULL, *parent = NULL;
 	bool hit;
 	struct hist_entry *he;
+	struct event_stat_id *stats;
+	struct perf_event_attr *attr;
 
-	if ((sort__has_parent || symbol_conf.use_callchain) && chain)
+	if ((sort__has_parent || symbol_conf.use_callchain) && data->callchain)
 		syms = perf_session__resolve_callchain(self, al->thread,
-						       chain, &parent);
-	he = __perf_session__add_hist_entry(self, al, parent, count, &hit);
+						       data->callchain, &parent);
+
+	attr = perf_header__find_attr(data->id, &self->header);
+	if (attr)
+		stats = get_stats(self, data->id, attr->type, attr->config);
+	else
+		stats = get_stats(self, data->id, 0, 0);
+	if (stats == NULL)
+		return -ENOMEM;
+	he = __perf_session__add_hist_entry(&stats->hists, al, parent,
+					    data->period, &hit);
 	if (he == NULL)
 		return -ENOMEM;
 
 	if (hit)
-		he->count += count;
+		he->count += data->period;
 
 	if (symbol_conf.use_callchain) {
 		if (!hit)
 			callchain_init(&he->callchain);
-		append_chain(&he->callchain, chain, syms);
+		append_chain(&he->callchain, data->callchain, syms);
 		free(syms);
 	}
 
@@ -86,10 +129,30 @@ static int validate_chain(struct ip_callchain *chain, event_t *event)
 	return 0;
 }
 
+static int add_event_total(struct perf_session *session,
+			   struct sample_data *data,
+			   struct perf_event_attr *attr)
+{
+	struct event_stat_id *stats;
+
+	if (attr)
+		stats = get_stats(session, data->id, attr->type, attr->config);
+	else
+		stats = get_stats(session, data->id, 0, 0);
+
+	if (!stats)
+		return -ENOMEM;
+
+	stats->stats.total += data->period;
+	session->events_stats.total += data->period;
+	return 0;
+}
+
 static int process_sample_event(event_t *event, struct perf_session *session)
 {
 	struct sample_data data = { .period = 1, };
 	struct addr_location al;
+	struct perf_event_attr *attr;
 
 	event__parse_sample(event, session->sample_type, &data);
 
@@ -123,12 +186,18 @@ static int process_sample_event(event_t *event, struct perf_session *session)
 	if (al.filtered || (hide_unresolved && al.sym == NULL))
 		return 0;
 
-	if (perf_session__add_hist_entry(session, &al, data.callchain, data.period)) {
+	if (perf_session__add_hist_entry(session, &al, &data)) {
 		pr_debug("problem incrementing symbol count, skipping event\n");
 		return -1;
 	}
 
-	session->events_stats.total += data.period;
+	attr = perf_header__find_attr(data.id, &session->header);
+
+	if (add_event_total(session, &data, attr)) {
+		pr_debug("problem adding event count\n");
+		return -1;
+	}
+
 	return 0;
 }
 
@@ -197,6 +266,7 @@ static int __cmd_report(void)
 {
 	int ret = -EINVAL;
 	struct perf_session *session;
+	struct rb_node *next;
 
 	session = perf_session__new(input_name, O_RDONLY, force);
 	if (session == NULL)
@@ -224,10 +294,28 @@ static int __cmd_report(void)
 	if (verbose > 2)
 		dsos__fprintf(stdout);
 
-	perf_session__collapse_resort(session);
-	perf_session__output_resort(session, session->events_stats.total);
-	fprintf(stdout, "# Samples: %Ld\n#\n", session->events_stats.total);
-	perf_session__fprintf_hists(session, NULL, false, stdout);
+	next = rb_first(&session->stats_by_id);
+	while (next) {
+		struct event_stat_id *stats;
+
+		stats = rb_entry(next, struct event_stat_id, rb_node);
+		perf_session__collapse_resort(&stats->hists);
+		perf_session__output_resort(&stats->hists, stats->stats.total);
+		if (rb_first(&session->stats_by_id) ==
+		    rb_last(&session->stats_by_id))
+			fprintf(stdout, "# Samples: %Ld\n#\n",
+				stats->stats.total);
+		else
+			fprintf(stdout, "# Samples: %Ld %s\n#\n",
+				stats->stats.total,
+				__event_name(stats->type, stats->config));
+
+		perf_session__fprintf_hists(&stats->hists, NULL, false, stdout,
+					    stats->stats.total);
+		fprintf(stdout, "\n\n");
+		next = rb_next(&stats->rb_node);
+	}
+
 	if (sort_order == default_sort_order &&
 	    parent_pattern == default_parent_pattern)
 		fprintf(stdout, "#\n# (For a higher level overview, try: perf report --sort comm,dso)\n#\n");
diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
index e8c85d5aec41..95db31cff6fd 100644
--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -45,6 +45,7 @@
 #include "util/event.h"
 #include "util/debug.h"
 #include "util/header.h"
+#include "util/cpumap.h"
 
 #include <sys/prctl.h>
 #include <math.h>
@@ -151,7 +152,7 @@ static void create_perf_stat_counter(int counter, int pid)
 		unsigned int cpu;
 
 		for (cpu = 0; cpu < nr_cpus; cpu++) {
-			fd[cpu][counter] = sys_perf_event_open(attr, -1, cpu, -1, 0);
+			fd[cpu][counter] = sys_perf_event_open(attr, -1, cpumap[cpu], -1, 0);
 			if (fd[cpu][counter] < 0 && verbose)
 				fprintf(stderr, ERR_PERF_OPEN, counter,
 					fd[cpu][counter], strerror(errno));
@@ -519,9 +520,10 @@ int cmd_stat(int argc, const char **argv, const char *prefix __used)
 		nr_counters = ARRAY_SIZE(default_attrs);
 	}
 
-	nr_cpus = sysconf(_SC_NPROCESSORS_ONLN);
-	assert(nr_cpus <= MAX_NR_CPUS);
-	assert((int)nr_cpus >= 0);
+	if (system_wide)
+		nr_cpus = read_cpu_map();
+	else
+		nr_cpus = 1;
 
 	/*
 	 * We dont want to block the signals - that would cause
diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c
index 31f2e597800c..0b719e3dde05 100644
--- a/tools/perf/builtin-top.c
+++ b/tools/perf/builtin-top.c
@@ -28,6 +28,7 @@
 #include <linux/rbtree.h>
 #include "util/parse-options.h"
 #include "util/parse-events.h"
+#include "util/cpumap.h"
 
 #include "util/debug.h"
 
@@ -1123,7 +1124,7 @@ static void start_counter(int i, int counter)
 
 	cpu = profile_cpu;
 	if (target_pid == -1 && profile_cpu == -1)
-		cpu = i;
+		cpu = cpumap[i];
 
 	attr = attrs + counter;
 
@@ -1347,12 +1348,10 @@ int cmd_top(int argc, const char **argv, const char *prefix __used)
 		attrs[counter].sample_period = default_interval;
 	}
 
-	nr_cpus = sysconf(_SC_NPROCESSORS_ONLN);
-	assert(nr_cpus <= MAX_NR_CPUS);
-	assert(nr_cpus >= 0);
-
 	if (target_pid != -1 || profile_cpu != -1)
 		nr_cpus = 1;
+	else
+		nr_cpus = read_cpu_map();
 
 	get_term_dimensions(&winsize);
 	if (print_entries == 0) {
diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-trace.c
index 5db687fc13de..407041d20de0 100644
--- a/tools/perf/builtin-trace.c
+++ b/tools/perf/builtin-trace.c
@@ -573,7 +573,8 @@ int cmd_trace(int argc, const char **argv, const char *prefix __used)
 
 	if (symbol__init() < 0)
 		return -1;
-	setup_pager();
+	if (!script_name)
+		setup_pager();
 
 	session = perf_session__new(input_name, O_RDONLY, 0);
 	if (session == NULL)
@@ -608,7 +609,6 @@ int cmd_trace(int argc, const char **argv, const char *prefix __used)
 			return -1;
 		}
 
-		perf_header__read(&session->header, input);
 		err = scripting_ops->generate_script("perf-trace");
 		goto out;
 	}
diff --git a/tools/perf/command-list.txt b/tools/perf/command-list.txt
index 9afcff2e3ae5..db6ee94d4a8e 100644
--- a/tools/perf/command-list.txt
+++ b/tools/perf/command-list.txt
@@ -18,3 +18,4 @@ perf-top			mainporcelain common
 perf-trace			mainporcelain common
 perf-probe			mainporcelain common
 perf-kmem			mainporcelain common
+perf-lock			mainporcelain common
diff --git a/tools/perf/perf-archive.sh b/tools/perf/perf-archive.sh
index 45fbe2f07b15..910468e6e01c 100644
--- a/tools/perf/perf-archive.sh
+++ b/tools/perf/perf-archive.sh
@@ -9,8 +9,9 @@ fi
 
 DEBUGDIR=~/.debug/
 BUILDIDS=$(mktemp /tmp/perf-archive-buildids.XXXXXX)
+NOBUILDID=0000000000000000000000000000000000000000
 
-perf buildid-list -i $PERF_DATA --with-hits > $BUILDIDS
+perf buildid-list -i $PERF_DATA --with-hits | grep -v "^$NOBUILDID " > $BUILDIDS
 if [ ! -s $BUILDIDS ] ; then
 	echo "perf archive: no build-ids found"
 	rm -f $BUILDIDS
diff --git a/tools/perf/perf.c b/tools/perf/perf.c
index 57cb107c1f13..cd32c200cdb3 100644
--- a/tools/perf/perf.c
+++ b/tools/perf/perf.c
@@ -445,7 +445,7 @@ int main(int argc, const char **argv)
 
 	/*
 	 * We use PATH to find perf commands, but we prepend some higher
-	 * precidence paths: the "--exec-path" option, the PERF_EXEC_PATH
+	 * precedence paths: the "--exec-path" option, the PERF_EXEC_PATH
 	 * environment, and the $(perfexecdir) from the Makefile at build
 	 * time.
 	 */
diff --git a/tools/perf/perf.h b/tools/perf/perf.h
index 75f941bfba9e..6fb379bc1d1f 100644
--- a/tools/perf/perf.h
+++ b/tools/perf/perf.h
@@ -65,9 +65,7 @@
  * Use the __kuser_memory_barrier helper in the CPU helper page. See
  * arch/arm/kernel/entry-armv.S in the kernel source for details.
  */
-#define rmb()		asm volatile("mov r0, #0xffff0fff; mov lr, pc;" \
-				     "sub pc, r0, #95" ::: "r0", "lr", "cc", \
-				     "memory")
+#define rmb()		((void(*)(void))0xffff0fa0)()
 #define cpu_relax()	asm volatile("":::"memory")
 #endif
 
diff --git a/tools/perf/util/cpumap.c b/tools/perf/util/cpumap.c
new file mode 100644
index 000000000000..4e01490e51e5
--- /dev/null
+++ b/tools/perf/util/cpumap.c
@@ -0,0 +1,59 @@
+#include "util.h"
+#include "../perf.h"
+#include "cpumap.h"
+#include <assert.h>
+#include <stdio.h>
+
+int cpumap[MAX_NR_CPUS];
+
+static int default_cpu_map(void)
+{
+	int nr_cpus, i;
+
+	nr_cpus = sysconf(_SC_NPROCESSORS_ONLN);
+	assert(nr_cpus <= MAX_NR_CPUS);
+	assert((int)nr_cpus >= 0);
+
+	for (i = 0; i < nr_cpus; ++i)
+		cpumap[i] = i;
+
+	return nr_cpus;
+}
+
+int read_cpu_map(void)
+{
+	FILE *onlnf;
+	int nr_cpus = 0;
+	int n, cpu, prev;
+	char sep;
+
+	onlnf = fopen("/sys/devices/system/cpu/online", "r");
+	if (!onlnf)
+		return default_cpu_map();
+
+	sep = 0;
+	prev = -1;
+	for (;;) {
+		n = fscanf(onlnf, "%u%c", &cpu, &sep);
+		if (n <= 0)
+			break;
+		if (prev >= 0) {
+			assert(nr_cpus + cpu - prev - 1 < MAX_NR_CPUS);
+			while (++prev < cpu)
+				cpumap[nr_cpus++] = prev;
+		}
+		assert (nr_cpus < MAX_NR_CPUS);
+		cpumap[nr_cpus++] = cpu;
+		if (n == 2 && sep == '-')
+			prev = cpu;
+		else
+			prev = -1;
+		if (n == 1 || sep == '\n')
+			break;
+	}
+	fclose(onlnf);
+	if (nr_cpus > 0)
+		return nr_cpus;
+
+	return default_cpu_map();
+}
diff --git a/tools/perf/util/cpumap.h b/tools/perf/util/cpumap.h
new file mode 100644
index 000000000000..86c78bb33098
--- /dev/null
+++ b/tools/perf/util/cpumap.h
@@ -0,0 +1,7 @@
+#ifndef __PERF_CPUMAP_H
+#define __PERF_CPUMAP_H
+
+extern int read_cpu_map(void);
+extern int cpumap[];
+
+#endif /* __PERF_CPUMAP_H */
diff --git a/tools/perf/util/event.h b/tools/perf/util/event.h
index 50a7132887f5..a33b94952e34 100644
--- a/tools/perf/util/event.h
+++ b/tools/perf/util/event.h
@@ -99,6 +99,15 @@ struct events_stats {
 	u64 lost;
 };
 
+struct event_stat_id {
+	struct rb_node		rb_node;
+	struct rb_root		hists;
+	struct events_stats	stats;
+	u64			config;
+	u64			event_stream;
+	u32			type;
+};
+
 void event__print_totals(void);
 
 struct perf_session;
diff --git a/tools/perf/util/hist.c b/tools/perf/util/hist.c
index e8daf5ca6fd2..2be33c7dbf03 100644
--- a/tools/perf/util/hist.c
+++ b/tools/perf/util/hist.c
@@ -12,12 +12,12 @@ struct callchain_param	callchain_param = {
  * histogram, sorted on item, collects counts
  */
 
-struct hist_entry *__perf_session__add_hist_entry(struct perf_session *self,
+struct hist_entry *__perf_session__add_hist_entry(struct rb_root *hists,
 						  struct addr_location *al,
 						  struct symbol *sym_parent,
 						  u64 count, bool *hit)
 {
-	struct rb_node **p = &self->hists.rb_node;
+	struct rb_node **p = &hists->rb_node;
 	struct rb_node *parent = NULL;
 	struct hist_entry *he;
 	struct hist_entry entry = {
@@ -53,7 +53,7 @@ struct hist_entry *__perf_session__add_hist_entry(struct perf_session *self,
 		return NULL;
 	*he = entry;
 	rb_link_node(&he->rb_node, parent, p);
-	rb_insert_color(&he->rb_node, &self->hists);
+	rb_insert_color(&he->rb_node, hists);
 	*hit = false;
 	return he;
 }
@@ -130,7 +130,7 @@ static void collapse__insert_entry(struct rb_root *root, struct hist_entry *he)
 	rb_insert_color(&he->rb_node, root);
 }
 
-void perf_session__collapse_resort(struct perf_session *self)
+void perf_session__collapse_resort(struct rb_root *hists)
 {
 	struct rb_root tmp;
 	struct rb_node *next;
@@ -140,17 +140,17 @@ void perf_session__collapse_resort(struct perf_session *self)
 		return;
 
 	tmp = RB_ROOT;
-	next = rb_first(&self->hists);
+	next = rb_first(hists);
 
 	while (next) {
 		n = rb_entry(next, struct hist_entry, rb_node);
 		next = rb_next(&n->rb_node);
 
-		rb_erase(&n->rb_node, &self->hists);
+		rb_erase(&n->rb_node, hists);
 		collapse__insert_entry(&tmp, n);
 	}
 
-	self->hists = tmp;
+	*hists = tmp;
 }
 
 /*
@@ -183,7 +183,7 @@ static void perf_session__insert_output_hist_entry(struct rb_root *root,
 	rb_insert_color(&he->rb_node, root);
 }
 
-void perf_session__output_resort(struct perf_session *self, u64 total_samples)
+void perf_session__output_resort(struct rb_root *hists, u64 total_samples)
 {
 	struct rb_root tmp;
 	struct rb_node *next;
@@ -194,18 +194,18 @@ void perf_session__output_resort(struct perf_session *self, u64 total_samples)
 		total_samples * (callchain_param.min_percent / 100);
 
 	tmp = RB_ROOT;
-	next = rb_first(&self->hists);
+	next = rb_first(hists);
 
 	while (next) {
 		n = rb_entry(next, struct hist_entry, rb_node);
 		next = rb_next(&n->rb_node);
 
-		rb_erase(&n->rb_node, &self->hists);
+		rb_erase(&n->rb_node, hists);
 		perf_session__insert_output_hist_entry(&tmp, n,
 						       min_callchain_hits);
 	}
 
-	self->hists = tmp;
+	*hists = tmp;
 }
 
 static size_t callchain__fprintf_left_margin(FILE *fp, int left_margin)
@@ -321,7 +321,7 @@ static size_t __callchain__fprintf_graph(FILE *fp, struct callchain_node *self,
 			new_depth_mask &= ~(1 << (depth - 1));
 
 		/*
-		 * But we keep the older depth mask for the line seperator
+		 * But we keep the older depth mask for the line separator
 		 * to keep the level link until we reach the last child
 		 */
 		ret += ipchain__fprintf_graph_line(fp, depth, depth_mask,
@@ -456,10 +456,10 @@ static size_t hist_entry_callchain__fprintf(FILE *fp, struct hist_entry *self,
 }
 
 static size_t hist_entry__fprintf(struct hist_entry *self,
-				  struct perf_session *session,
 				  struct perf_session *pair_session,
 				  bool show_displacement,
-				  long displacement, FILE *fp)
+				  long displacement, FILE *fp,
+				  u64 session_total)
 {
 	struct sort_entry *se;
 	u64 count, total;
@@ -474,7 +474,7 @@ static size_t hist_entry__fprintf(struct hist_entry *self,
 		total = pair_session->events_stats.total;
 	} else {
 		count = self->count;
-		total = session->events_stats.total;
+		total = session_total;
 	}
 
 	if (total)
@@ -496,8 +496,8 @@ static size_t hist_entry__fprintf(struct hist_entry *self,
 
 		if (total > 0)
 			old_percent = (count * 100.0) / total;
-		if (session->events_stats.total > 0)
-			new_percent = (self->count * 100.0) / session->events_stats.total;
+		if (session_total > 0)
+			new_percent = (self->count * 100.0) / session_total;
 
 		diff = new_percent - old_percent;
 
@@ -544,16 +544,17 @@ static size_t hist_entry__fprintf(struct hist_entry *self,
 			left_margin -= thread__comm_len(self->thread);
 		}
 
-		hist_entry_callchain__fprintf(fp, self, session->events_stats.total,
+		hist_entry_callchain__fprintf(fp, self, session_total,
 					      left_margin);
 	}
 
 	return ret;
 }
 
-size_t perf_session__fprintf_hists(struct perf_session *self,
+size_t perf_session__fprintf_hists(struct rb_root *hists,
 				   struct perf_session *pair,
-				   bool show_displacement, FILE *fp)
+				   bool show_displacement, FILE *fp,
+				   u64 session_total)
 {
 	struct sort_entry *se;
 	struct rb_node *nd;
@@ -641,7 +642,7 @@ size_t perf_session__fprintf_hists(struct perf_session *self,
 	fprintf(fp, "\n#\n");
 
 print_entries:
-	for (nd = rb_first(&self->hists); nd; nd = rb_next(nd)) {
+	for (nd = rb_first(hists); nd; nd = rb_next(nd)) {
 		struct hist_entry *h = rb_entry(nd, struct hist_entry, rb_node);
 
 		if (show_displacement) {
@@ -652,8 +653,13 @@ print_entries:
 				displacement = 0;
 			++position;
 		}
-		ret += hist_entry__fprintf(h, self, pair, show_displacement,
-					   displacement, fp);
+		ret += hist_entry__fprintf(h, pair, show_displacement,
+					   displacement, fp, session_total);
+		if (h->map == NULL && verbose > 1) {
+			__map_groups__fprintf_maps(&h->thread->mg,
+						   MAP__FUNCTION, fp);
+			fprintf(fp, "%.10s end\n", graph_dotted_line);
+		}
 	}
 
 	free(rem_sq_bracket);
diff --git a/tools/perf/util/hist.h b/tools/perf/util/hist.h
index e5f99b24048b..16f360cce5bf 100644
--- a/tools/perf/util/hist.h
+++ b/tools/perf/util/hist.h
@@ -10,8 +10,9 @@ struct perf_session;
 struct hist_entry;
 struct addr_location;
 struct symbol;
+struct rb_root;
 
-struct hist_entry *__perf_session__add_hist_entry(struct perf_session *self,
+struct hist_entry *__perf_session__add_hist_entry(struct rb_root *hists,
 						  struct addr_location *al,
 						  struct symbol *parent,
 						  u64 count, bool *hit);
@@ -19,9 +20,10 @@ extern int64_t hist_entry__cmp(struct hist_entry *, struct hist_entry *);
 extern int64_t hist_entry__collapse(struct hist_entry *, struct hist_entry *);
 void hist_entry__free(struct hist_entry *);
 
-void perf_session__output_resort(struct perf_session *self, u64 total_samples);
-void perf_session__collapse_resort(struct perf_session *self);
-size_t perf_session__fprintf_hists(struct perf_session *self,
+void perf_session__output_resort(struct rb_root *hists, u64 total_samples);
+void perf_session__collapse_resort(struct rb_root *hists);
+size_t perf_session__fprintf_hists(struct rb_root *hists,
 				   struct perf_session *pair,
-				   bool show_displacement, FILE *fp);
+				   bool show_displacement, FILE *fp,
+				   u64 session_total);
 #endif	/* __PERF_HIST_H */
diff --git a/tools/perf/util/probe-event.c b/tools/perf/util/probe-event.c
index c971e81e9cbf..53181dbfe4a8 100644
--- a/tools/perf/util/probe-event.c
+++ b/tools/perf/util/probe-event.c
@@ -508,8 +508,8 @@ void show_perf_probe_events(void)
 	struct str_node *ent;
 
 	setup_pager();
-
 	memset(&pp, 0, sizeof(pp));
+
 	fd = open_kprobe_events(O_RDONLY, 0);
 	rawlist = get_trace_kprobe_event_rawlist(fd);
 	close(fd);
diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c
index e77dc886760e..1e6c65ebbd80 100644
--- a/tools/perf/util/probe-finder.c
+++ b/tools/perf/util/probe-finder.c
@@ -169,7 +169,7 @@ static const char *cu_find_realpath(Dwarf_Die *cu_die, const char *fname)
 {
 	Dwarf_Files *files;
 	size_t nfiles, i;
-	const char *src;
+	const char *src = NULL;
 	int ret;
 
 	if (!fname)
diff --git a/tools/perf/util/session.c b/tools/perf/util/session.c
index 0de7258e70a5..eed1cb889008 100644
--- a/tools/perf/util/session.c
+++ b/tools/perf/util/session.c
@@ -70,6 +70,7 @@ struct perf_session *perf_session__new(const char *filename, int mode, bool forc
 
 	memcpy(self->filename, filename, len);
 	self->threads = RB_ROOT;
+	self->stats_by_id = RB_ROOT;
 	self->last_match = NULL;
 	self->mmap_window = 32;
 	self->cwd = NULL;
diff --git a/tools/perf/util/session.h b/tools/perf/util/session.h
index 31950fcd8a4d..5c33417eebb3 100644
--- a/tools/perf/util/session.h
+++ b/tools/perf/util/session.h
@@ -20,6 +20,7 @@ struct perf_session {
 	struct thread		*last_match;
 	struct map		*vmlinux_maps[MAP__NR_TYPES];
 	struct events_stats	events_stats;
+	struct rb_root		stats_by_id;
 	unsigned long		event_total[PERF_RECORD_MAX];
 	unsigned long		unknown_events;
 	struct rb_root		hists;
diff --git a/tools/perf/util/thread.c b/tools/perf/util/thread.c
index 21b92162282b..fa968312ee7d 100644
--- a/tools/perf/util/thread.c
+++ b/tools/perf/util/thread.c
@@ -79,8 +79,8 @@ int thread__comm_len(struct thread *self)
 	return self->comm_len;
 }
 
-static size_t __map_groups__fprintf_maps(struct map_groups *self,
-					 enum map_type type, FILE *fp)
+size_t __map_groups__fprintf_maps(struct map_groups *self,
+				  enum map_type type, FILE *fp)
 {
 	size_t printed = fprintf(fp, "%s:\n", map_type__name[type]);
 	struct rb_node *nd;
@@ -89,7 +89,7 @@ static size_t __map_groups__fprintf_maps(struct map_groups *self,
 		struct map *pos = rb_entry(nd, struct map, rb_node);
 		printed += fprintf(fp, "Map:");
 		printed += map__fprintf(pos, fp);
-		if (verbose > 1) {
+		if (verbose > 2) {
 			printed += dso__fprintf(pos->dso, type, fp);
 			printed += fprintf(fp, "--\n");
 		}
@@ -183,8 +183,8 @@ struct thread *perf_session__findnew(struct perf_session *self, pid_t pid)
 	return th;
 }
 
-static void map_groups__remove_overlappings(struct map_groups *self,
-					    struct map *map)
+static int map_groups__fixup_overlappings(struct map_groups *self,
+					  struct map *map)
 {
 	struct rb_root *root = &self->maps[map->type];
 	struct rb_node *next = rb_first(root);
@@ -209,7 +209,36 @@ static void map_groups__remove_overlappings(struct map_groups *self,
 		 * list.
 		 */
 		list_add_tail(&pos->node, &self->removed_maps[map->type]);
+		/*
+		 * Now check if we need to create new maps for areas not
+		 * overlapped by the new map:
+		 */
+		if (map->start > pos->start) {
+			struct map *before = map__clone(pos);
+
+			if (before == NULL)
+				return -ENOMEM;
+
+			before->end = map->start - 1;
+			map_groups__insert(self, before);
+			if (verbose >= 2)
+				map__fprintf(before, stderr);
+		}
+
+		if (map->end < pos->end) {
+			struct map *after = map__clone(pos);
+
+			if (after == NULL)
+				return -ENOMEM;
+
+			after->start = map->end + 1;
+			map_groups__insert(self, after);
+			if (verbose >= 2)
+				map__fprintf(after, stderr);
+		}
 	}
+
+	return 0;
 }
 
 void maps__insert(struct rb_root *maps, struct map *map)
@@ -254,7 +283,7 @@ struct map *maps__find(struct rb_root *maps, u64 ip)
 
 void thread__insert_map(struct thread *self, struct map *map)
 {
-	map_groups__remove_overlappings(&self->mg, map);
+	map_groups__fixup_overlappings(&self->mg, map);
 	map_groups__insert(&self->mg, map);
 }
 
diff --git a/tools/perf/util/thread.h b/tools/perf/util/thread.h
index 0a28f39de545..dcf70303e58e 100644
--- a/tools/perf/util/thread.h
+++ b/tools/perf/util/thread.h
@@ -10,6 +10,9 @@ struct map_groups {
 	struct list_head	removed_maps[MAP__NR_TYPES];
 };
 
+size_t __map_groups__fprintf_maps(struct map_groups *self,
+				  enum map_type type, FILE *fp);
+
 struct thread {
 	struct rb_node		rb_node;
 	struct map_groups	mg;