summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/include/asm/mach/udc_pxa2xx.h2
-rw-r--r--arch/arm/mach-pxa/am200epd.c8
-rw-r--r--arch/arm/mach-pxa/am300epd.c13
-rw-r--r--arch/arm/mach-pxa/balloon3.c2
-rw-r--r--arch/arm/mach-pxa/cm-x2xx.c2
-rw-r--r--arch/arm/mach-pxa/cm-x300.c2
-rw-r--r--arch/arm/mach-pxa/colibri-pxa270-income.c2
-rw-r--r--arch/arm/mach-pxa/colibri-pxa3xx.c2
-rw-r--r--arch/arm/mach-pxa/corgi.c1
-rw-r--r--arch/arm/mach-pxa/devices.c9
-rw-r--r--arch/arm/mach-pxa/em-x270.c2
-rw-r--r--arch/arm/mach-pxa/eseries.c36
-rw-r--r--arch/arm/mach-pxa/ezx.c12
-rw-r--r--arch/arm/mach-pxa/gumstix.c13
-rw-r--r--arch/arm/mach-pxa/idp.c2
-rw-r--r--arch/arm/mach-pxa/include/mach/palmz72.h5
-rw-r--r--arch/arm/mach-pxa/include/mach/pxafb.h4
-rw-r--r--arch/arm/mach-pxa/include/mach/z2.h3
-rw-r--r--arch/arm/mach-pxa/littleton.c2
-rw-r--r--arch/arm/mach-pxa/lpd270.c2
-rw-r--r--arch/arm/mach-pxa/lubbock.c2
-rw-r--r--arch/arm/mach-pxa/magician.c2
-rw-r--r--arch/arm/mach-pxa/mainstone.c2
-rw-r--r--arch/arm/mach-pxa/mioa701.c2
-rw-r--r--arch/arm/mach-pxa/palm27x.c5
-rw-r--r--arch/arm/mach-pxa/palmtc.c2
-rw-r--r--arch/arm/mach-pxa/palmte2.c33
-rw-r--r--arch/arm/mach-pxa/palmz72.c127
-rw-r--r--arch/arm/mach-pxa/pcm990-baseboard.c2
-rw-r--r--arch/arm/mach-pxa/poodle.c3
-rw-r--r--arch/arm/mach-pxa/raumfeld.c2
-rw-r--r--arch/arm/mach-pxa/saar.c2
-rw-r--r--arch/arm/mach-pxa/spitz.c2
-rw-r--r--arch/arm/mach-pxa/tavorevb.c2
-rw-r--r--arch/arm/mach-pxa/time.c5
-rw-r--r--arch/arm/mach-pxa/tosa.c13
-rw-r--r--arch/arm/mach-pxa/trizeps4.c4
-rw-r--r--arch/arm/mach-pxa/viper.c2
-rw-r--r--arch/arm/mach-pxa/vpac270.c2
-rw-r--r--arch/arm/mach-pxa/z2.c77
-rw-r--r--arch/arm/mach-pxa/zeus.c2
-rw-r--r--arch/arm/mach-pxa/zylonite.c4
-rw-r--r--drivers/ata/pata_palmld.c43
-rw-r--r--drivers/pcmcia/pxa2xx_colibri.c133
-rw-r--r--drivers/pcmcia/pxa2xx_palmld.c42
-rw-r--r--drivers/pcmcia/pxa2xx_palmtc.c75
-rw-r--r--drivers/pcmcia/pxa2xx_palmtx.c57
-rw-r--r--drivers/pcmcia/pxa2xx_vpac270.c110
-rw-r--r--drivers/usb/gadget/pxa25x_udc.c76
-rw-r--r--drivers/video/pxafb.c136
-rw-r--r--drivers/video/pxafb.h3
51 files changed, 514 insertions, 582 deletions
diff --git a/arch/arm/include/asm/mach/udc_pxa2xx.h b/arch/arm/include/asm/mach/udc_pxa2xx.h
index 833306ee9e7f..ea297ac70bc6 100644
--- a/arch/arm/include/asm/mach/udc_pxa2xx.h
+++ b/arch/arm/include/asm/mach/udc_pxa2xx.h
@@ -20,8 +20,6 @@ struct pxa2xx_udc_mach_info {
* VBUS IRQ and omit the methods above. Store the GPIO number
* here. Note that sometimes the signals go through inverters...
*/
- bool gpio_vbus_inverted;
- int gpio_vbus; /* high == vbus present */
bool gpio_pullup_inverted;
int gpio_pullup; /* high == pullup activated */
};
diff --git a/arch/arm/mach-pxa/am200epd.c b/arch/arm/mach-pxa/am200epd.c
index 3499fada73ae..4cb069fd9af2 100644
--- a/arch/arm/mach-pxa/am200epd.c
+++ b/arch/arm/mach-pxa/am200epd.c
@@ -128,8 +128,8 @@ static int am200_init_gpio_regs(struct metronomefb_par *par)
return 0;
err_req_gpio:
- while (i > 0)
- gpio_free(gpios[i--]);
+ while (--i >= 0)
+ gpio_free(gpios[i]);
return err;
}
@@ -194,7 +194,7 @@ static struct notifier_block am200_fb_notif = {
};
/* this gets called as part of our init. these steps must be done now so
- * that we can use set_pxa_fb_info */
+ * that we can use pxa_set_fb_info */
static void __init am200_presetup_fb(void)
{
int fw;
@@ -249,7 +249,7 @@ static void __init am200_presetup_fb(void)
/* we divide since we told the LCD controller we're 16bpp */
am200_fb_info.modes->xres /= 2;
- set_pxa_fb_info(&am200_fb_info);
+ pxa_set_fb_info(NULL, &am200_fb_info);
}
diff --git a/arch/arm/mach-pxa/am300epd.c b/arch/arm/mach-pxa/am300epd.c
index 993d75e66390..fa8bad235d9f 100644
--- a/arch/arm/mach-pxa/am300epd.c
+++ b/arch/arm/mach-pxa/am300epd.c
@@ -125,10 +125,7 @@ static int am300_init_gpio_regs(struct broadsheetfb_par *par)
if (err) {
dev_err(&am300_device->dev, "failed requesting "
"gpio %d, err=%d\n", i, err);
- while (i >= DB0_GPIO_PIN)
- gpio_free(i--);
- i = ARRAY_SIZE(gpios) - 1;
- goto err_req_gpio;
+ goto err_req_gpio2;
}
}
@@ -159,9 +156,13 @@ static int am300_init_gpio_regs(struct broadsheetfb_par *par)
return 0;
+err_req_gpio2:
+ while (--i >= DB0_GPIO_PIN)
+ gpio_free(i);
+ i = ARRAY_SIZE(gpios);
err_req_gpio:
- while (i > 0)
- gpio_free(gpios[i--]);
+ while (--i >= 0)
+ gpio_free(gpios[i]);
return err;
}
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index d2af73321dae..c6661b1d30b2 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -263,7 +263,7 @@ static void __init balloon3_lcd_init(void)
}
balloon3_lcd_screen.pxafb_backlight_power = balloon3_backlight_power;
- set_pxa_fb_info(&balloon3_lcd_screen);
+ pxa_set_fb_info(NULL, &balloon3_lcd_screen);
return;
err2:
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index b734d8468168..8225e2e58c6e 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -379,7 +379,7 @@ __setup("monitor=", cmx2xx_set_display);
static void __init cmx2xx_init_display(void)
{
- set_pxa_fb_info(cmx2xx_display);
+ pxa_set_fb_info(NULL, cmx2xx_display);
}
#else
static inline void cmx2xx_init_display(void) {}
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index bfca7ed2fea3..7a8edba0dcdf 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -296,7 +296,7 @@ static struct pxafb_mach_info cm_x300_lcd = {
static void __init cm_x300_init_lcd(void)
{
- set_pxa_fb_info(&cm_x300_lcd);
+ pxa_set_fb_info(NULL, &cm_x300_lcd);
}
#else
static inline void cm_x300_init_lcd(void) {}
diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c
index ee797397dc5b..44c1b77ece67 100644
--- a/arch/arm/mach-pxa/colibri-pxa270-income.c
+++ b/arch/arm/mach-pxa/colibri-pxa270-income.c
@@ -175,7 +175,7 @@ static struct pxafb_mach_info income_lcd_screen = {
static void __init income_lcd_init(void)
{
- set_pxa_fb_info(&income_lcd_screen);
+ pxa_set_fb_info(NULL, &income_lcd_screen);
}
#else
static inline void income_lcd_init(void) {}
diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c
index 96b2d9fbfef0..3f9be419959d 100644
--- a/arch/arm/mach-pxa/colibri-pxa3xx.c
+++ b/arch/arm/mach-pxa/colibri-pxa3xx.c
@@ -105,7 +105,7 @@ void __init colibri_pxa3xx_init_lcd(int bl_pin)
lcd_bl_pin = bl_pin;
gpio_request(bl_pin, "lcd backlight");
gpio_direction_output(bl_pin, 0);
- set_pxa_fb_info(&sharp_lq43_info);
+ pxa_set_fb_info(NULL, &sharp_lq43_info);
}
#endif
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index d4e705caefea..3a5507e31919 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -462,7 +462,6 @@ static struct pxaficp_platform_data corgi_ficp_platform_data = {
* USB Device Controller
*/
static struct pxa2xx_udc_mach_info udc_info __initdata = {
- .gpio_vbus = -1,
/* no connect GPIO; corgi can't tell connection status */
.gpio_pullup = CORGI_GPIO_USB_PULLUP,
};
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index c4bf08b3eb61..2e0425404de5 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -90,7 +90,6 @@ void __init pxa_set_mci_info(struct pxamci_platform_data *info)
static struct pxa2xx_udc_mach_info pxa_udc_info = {
.gpio_pullup = -1,
- .gpio_vbus = -1,
};
void __init pxa_set_udc_info(struct pxa2xx_udc_mach_info *info)
@@ -188,16 +187,12 @@ struct platform_device pxa_device_fb = {
.resource = pxafb_resources,
};
-void __init set_pxa_fb_info(struct pxafb_mach_info *info)
+void __init pxa_set_fb_info(struct device *parent, struct pxafb_mach_info *info)
{
+ pxa_device_fb.dev.parent = parent;
pxa_register_device(&pxa_device_fb, info);
}
-void __init set_pxa_fb_parent(struct device *parent_dev)
-{
- pxa_device_fb.dev.parent = parent_dev;
-}
-
static struct resource pxa_resource_ffuart[] = {
{
.start = 0x40100000,
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index b411d7cbf5a1..f8a6e9d79a3a 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -689,7 +689,7 @@ static struct pxafb_mach_info em_x270_lcd = {
static void __init em_x270_init_lcd(void)
{
- set_pxa_fb_info(&em_x270_lcd);
+ pxa_set_fb_info(NULL, &em_x270_lcd);
}
#else
static inline void em_x270_init_lcd(void) {}
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index edca0a043293..2e3970fdde0b 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -20,6 +20,7 @@
#include <linux/mfd/t7l66xb.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
+#include <linux/usb/gpio_vbus.h>
#include <video/w100fb.h>
@@ -51,12 +52,20 @@ void __init eseries_fixup(struct machine_desc *desc,
mi->bank[0].size = (64*1024*1024);
}
-struct pxa2xx_udc_mach_info e7xx_udc_mach_info = {
+struct gpio_vbus_mach_info e7xx_udc_info = {
.gpio_vbus = GPIO_E7XX_USB_DISC,
.gpio_pullup = GPIO_E7XX_USB_PULLUP,
.gpio_pullup_inverted = 1
};
+static struct platform_device e7xx_gpio_vbus = {
+ .name = "gpio-vbus",
+ .id = -1,
+ .dev = {
+ .platform_data = &e7xx_udc_info,
+ },
+};
+
struct pxaficp_platform_data e7xx_ficp_platform_data = {
.gpio_pwdown = GPIO_E7XX_IR_OFF,
.transceiver_cap = IR_SIRMODE | IR_OFF,
@@ -165,6 +174,7 @@ static struct platform_device e330_tc6387xb_device = {
static struct platform_device *e330_devices[] __initdata = {
&e330_tc6387xb_device,
+ &e7xx_gpio_vbus,
};
static void __init e330_init(void)
@@ -175,7 +185,6 @@ static void __init e330_init(void)
eseries_register_clks();
eseries_get_tmio_gpios();
platform_add_devices(ARRAY_AND_SIZE(e330_devices));
- pxa_set_udc_info(&e7xx_udc_mach_info);
}
MACHINE_START(E330, "Toshiba e330")
@@ -214,6 +223,7 @@ static struct platform_device e350_t7l66xb_device = {
static struct platform_device *e350_devices[] __initdata = {
&e350_t7l66xb_device,
+ &e7xx_gpio_vbus,
};
static void __init e350_init(void)
@@ -224,7 +234,6 @@ static void __init e350_init(void)
eseries_register_clks();
eseries_get_tmio_gpios();
platform_add_devices(ARRAY_AND_SIZE(e350_devices));
- pxa_set_udc_info(&e7xx_udc_mach_info);
}
MACHINE_START(E350, "Toshiba e350")
@@ -333,6 +342,7 @@ static struct platform_device e400_t7l66xb_device = {
static struct platform_device *e400_devices[] __initdata = {
&e400_t7l66xb_device,
+ &e7xx_gpio_vbus,
};
static void __init e400_init(void)
@@ -344,9 +354,8 @@ static void __init e400_init(void)
/* Fixme - e400 may have a switched clock */
eseries_register_clks();
eseries_get_tmio_gpios();
- set_pxa_fb_info(&e400_pxafb_mach_info);
+ pxa_set_fb_info(NULL, &e400_pxafb_mach_info);
platform_add_devices(ARRAY_AND_SIZE(e400_devices));
- pxa_set_udc_info(&e7xx_udc_mach_info);
}
MACHINE_START(E400, "Toshiba e400")
@@ -519,6 +528,7 @@ static struct platform_device e740_t7l66xb_device = {
static struct platform_device *e740_devices[] __initdata = {
&e740_fb_device,
&e740_t7l66xb_device,
+ &e7xx_gpio_vbus,
};
static void __init e740_init(void)
@@ -532,7 +542,6 @@ static void __init e740_init(void)
"UDCCLK", &pxa25x_device_udc.dev),
eseries_get_tmio_gpios();
platform_add_devices(ARRAY_AND_SIZE(e740_devices));
- pxa_set_udc_info(&e7xx_udc_mach_info);
pxa_set_ac97_info(NULL);
pxa_set_ficp_info(&e7xx_ficp_platform_data);
}
@@ -711,6 +720,7 @@ static struct platform_device e750_tc6393xb_device = {
static struct platform_device *e750_devices[] __initdata = {
&e750_fb_device,
&e750_tc6393xb_device,
+ &e7xx_gpio_vbus,
};
static void __init e750_init(void)
@@ -723,7 +733,6 @@ static void __init e750_init(void)
"GPIO11_CLK", NULL),
eseries_get_tmio_gpios();
platform_add_devices(ARRAY_AND_SIZE(e750_devices));
- pxa_set_udc_info(&e7xx_udc_mach_info);
pxa_set_ac97_info(NULL);
pxa_set_ficp_info(&e7xx_ficp_platform_data);
}
@@ -873,12 +882,21 @@ static struct platform_device e800_fb_device = {
/* --------------------------- UDC definitions --------------------------- */
-static struct pxa2xx_udc_mach_info e800_udc_mach_info = {
+static struct gpio_vbus_mach_info e800_udc_info = {
.gpio_vbus = GPIO_E800_USB_DISC,
.gpio_pullup = GPIO_E800_USB_PULLUP,
.gpio_pullup_inverted = 1
};
+static struct platform_device e800_gpio_vbus = {
+ .name = "gpio-vbus",
+ .id = -1,
+ .dev = {
+ .platform_data = &e800_udc_info,
+ },
+};
+
+
/* ----------------- e800 tc6393xb parameters ------------------ */
static struct tc6393xb_platform_data e800_tc6393xb_info = {
@@ -907,6 +925,7 @@ static struct platform_device e800_tc6393xb_device = {
static struct platform_device *e800_devices[] __initdata = {
&e800_fb_device,
&e800_tc6393xb_device,
+ &e800_gpio_vbus,
};
static void __init e800_init(void)
@@ -919,7 +938,6 @@ static void __init e800_init(void)
"GPIO11_CLK", NULL),
eseries_get_tmio_gpios();
platform_add_devices(ARRAY_AND_SIZE(e800_devices));
- pxa_set_udc_info(&e800_udc_mach_info);
pxa_set_ac97_info(NULL);
}
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index 93f05e024313..d88aed8fbe15 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -783,7 +783,7 @@ static void __init a780_init(void)
pxa_set_i2c_info(NULL);
- set_pxa_fb_info(&ezx_fb_info_1);
+ pxa_set_fb_info(NULL, &ezx_fb_info_1);
pxa_set_keypad_info(&a780_keypad_platform_data);
@@ -853,7 +853,7 @@ static void __init e680_init(void)
pxa_set_i2c_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(e680_i2c_board_info));
- set_pxa_fb_info(&ezx_fb_info_1);
+ pxa_set_fb_info(NULL, &ezx_fb_info_1);
pxa_set_keypad_info(&e680_keypad_platform_data);
@@ -918,7 +918,7 @@ static void __init a1200_init(void)
pxa_set_i2c_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(a1200_i2c_board_info));
- set_pxa_fb_info(&ezx_fb_info_2);
+ pxa_set_fb_info(NULL, &ezx_fb_info_2);
pxa_set_keypad_info(&a1200_keypad_platform_data);
@@ -1103,7 +1103,7 @@ static void __init a910_init(void)
pxa_set_i2c_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(a910_i2c_board_info));
- set_pxa_fb_info(&ezx_fb_info_2);
+ pxa_set_fb_info(NULL, &ezx_fb_info_2);
pxa_set_keypad_info(&a910_keypad_platform_data);
@@ -1173,7 +1173,7 @@ static void __init e6_init(void)
pxa_set_i2c_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(e6_i2c_board_info));
- set_pxa_fb_info(&ezx_fb_info_2);
+ pxa_set_fb_info(NULL, &ezx_fb_info_2);
pxa_set_keypad_info(&e6_keypad_platform_data);
@@ -1212,7 +1212,7 @@ static void __init e2_init(void)
pxa_set_i2c_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(e2_i2c_board_info));
- set_pxa_fb_info(&ezx_fb_info_2);
+ pxa_set_fb_info(NULL, &ezx_fb_info_2);
pxa_set_keypad_info(&e2_keypad_platform_data);
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index 6fd319ea5284..d65e4bde9b91 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -26,6 +26,7 @@
#include <linux/gpio.h>
#include <linux/err.h>
#include <linux/clk.h>
+#include <linux/usb/gpio_vbus.h>
#include <asm/setup.h>
#include <asm/memory.h>
@@ -106,14 +107,22 @@ static void __init gumstix_mmc_init(void)
#endif
#ifdef CONFIG_USB_GADGET_PXA25X
-static struct pxa2xx_udc_mach_info gumstix_udc_info __initdata = {
+static struct gpio_vbus_mach_info gumstix_udc_info = {
.gpio_vbus = GPIO_GUMSTIX_USB_GPIOn,
.gpio_pullup = GPIO_GUMSTIX_USB_GPIOx,
};
+static struct platform_device gumstix_gpio_vbus = {
+ .name = "gpio-vbus",
+ .id = -1,
+ .dev = {
+ .platform_data = &gumstix_udc_info,
+ },
+};
+
static void __init gumstix_udc_init(void)
{
- pxa_set_udc_info(&gumstix_udc_info);
+ platform_device_register(&gumstix_gpio_vbus);
}
#else
static void gumstix_udc_init(void)
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index dd40e4a9291c..f7fb64f11a7d 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -167,7 +167,7 @@ static void __init idp_init(void)
platform_device_register(&smc91x_device);
//platform_device_register(&mst_audio_device);
- set_pxa_fb_info(&sharp_lm8v31);
+ pxa_set_fb_info(NULL, &sharp_lm8v31);
pxa_set_mci_info(&idp_mci_platform_data);
}
diff --git a/arch/arm/mach-pxa/include/mach/palmz72.h b/arch/arm/mach-pxa/include/mach/palmz72.h
index 2bbcf70dd935..0d4700a79612 100644
--- a/arch/arm/mach-pxa/include/mach/palmz72.h
+++ b/arch/arm/mach-pxa/include/mach/palmz72.h
@@ -44,6 +44,11 @@
#define GPIO_NR_PALMZ72_BT_POWER 17
#define GPIO_NR_PALMZ72_BT_RESET 83
+/* Camera */
+#define GPIO_NR_PALMZ72_CAM_PWDN 56
+#define GPIO_NR_PALMZ72_CAM_RESET 57
+#define GPIO_NR_PALMZ72_CAM_POWER 91
+
/** Initial values **/
/* Battery */
diff --git a/arch/arm/mach-pxa/include/mach/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h
index 160ec83f51a6..01a45ac48114 100644
--- a/arch/arm/mach-pxa/include/mach/pxafb.h
+++ b/arch/arm/mach-pxa/include/mach/pxafb.h
@@ -154,8 +154,8 @@ struct pxafb_mach_info {
void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *);
void (*smart_update)(struct fb_info *);
};
-void set_pxa_fb_info(struct pxafb_mach_info *hard_pxa_fb_info);
-void set_pxa_fb_parent(struct device *parent_dev);
+
+void pxa_set_fb_info(struct device *, struct pxafb_mach_info *);
unsigned long pxafb_get_hsync_time(struct device *dev);
extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int);
diff --git a/arch/arm/mach-pxa/include/mach/z2.h b/arch/arm/mach-pxa/include/mach/z2.h
index 8835c16bc82f..7b0f71ef3167 100644
--- a/arch/arm/mach-pxa/include/mach/z2.h
+++ b/arch/arm/mach-pxa/include/mach/z2.h
@@ -25,8 +25,7 @@
#define GPIO98_ZIPITZ2_LID_BUTTON 98
/* Libertas GSPI8686 WiFi */
-#define GPIO14_ZIPITZ2_WIFI_RESET 14
-#define GPIO15_ZIPITZ2_WIFI_POWER 15
+#define GPIO14_ZIPITZ2_WIFI_POWER 14
#define GPIO24_ZIPITZ2_WIFI_CS 24
#define GPIO36_ZIPITZ2_WIFI_IRQ 36
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 87c1ed9ccd2f..e5e326d2cdc9 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -185,7 +185,7 @@ static struct pxafb_mach_info littleton_lcd_info = {
static void littleton_init_lcd(void)
{
- set_pxa_fb_info(&littleton_lcd_info);
+ pxa_set_fb_info(NULL, &littleton_lcd_info);
}
#else
static inline void littleton_init_lcd(void) {};
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index c9a3e775c2de..8aebc58c9f1d 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -480,7 +480,7 @@ static void __init lpd270_init(void)
pxa_set_ac97_info(NULL);
if (lpd270_lcd_to_use != NULL)
- set_pxa_fb_info(lpd270_lcd_to_use);
+ pxa_set_fb_info(NULL, lpd270_lcd_to_use);
pxa_set_ohci_info(&lpd270_ohci_platform_data);
}
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index dca20de306bb..12a2a56b2157 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -521,7 +521,7 @@ static void __init lubbock_init(void)
clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL);
pxa_set_udc_info(&udc_info);
- set_pxa_fb_info(&sharp_lm8v31);
+ pxa_set_fb_info(NULL, &sharp_lm8v31);
pxa_set_mci_info(&lubbock_mci_platform_data);
pxa_set_ficp_info(&lubbock_ficp_platform_data);
pxa_set_ac97_info(NULL);
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 5535991c4a3c..a72993dde2b3 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -757,7 +757,7 @@ static void __init magician_init(void)
gpio_direction_output(GPIO104_MAGICIAN_LCD_POWER_1, 0);
gpio_direction_output(GPIO105_MAGICIAN_LCD_POWER_2, 0);
gpio_direction_output(GPIO106_MAGICIAN_LCD_POWER_3, 0);
- set_pxa_fb_info(lcd_select ? &samsung_info : &toppoly_info);
+ pxa_set_fb_info(NULL, lcd_select ? &samsung_info : &toppoly_info);
} else
pr_err("LCD detection: CPLD mapping failed\n");
}
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index f9542220595a..8306b227e61c 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -592,7 +592,7 @@ static void __init mainstone_init(void)
else
mainstone_pxafb_info.modes = &toshiba_ltm035a776c_mode;
- set_pxa_fb_info(&mainstone_pxafb_info);
+ pxa_set_fb_info(NULL, &mainstone_pxafb_info);
mainstone_backlight_register();
pxa_set_mci_info(&mainstone_mci_platform_data);
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 78d98a8607ec..dd13bb63259b 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -795,7 +795,7 @@ static void __init mioa701_machine_init(void)
pxa_set_stuart_info(NULL);
mio_gpio_request(ARRAY_AND_SIZE(global_gpios));
bootstrap_init();
- set_pxa_fb_info(&mioa701_pxafb_info);
+ pxa_set_fb_info(NULL, &mioa701_pxafb_info);
pxa_set_mci_info(&mioa701_mci_info);
pxa_set_keypad_info(&mioa701_keypad_info);
pxa_set_udc_info(&mioa701_udc_info);
diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c
index 72adb3ae2b43..325c245c0a0d 100644
--- a/arch/arm/mach-pxa/palm27x.c
+++ b/arch/arm/mach-pxa/palm27x.c
@@ -1,8 +1,7 @@
/*
* Common code for Palm LD, T5, TX, Z72
*
- * Copyright (C) 2010
- * Marek Vasut <marek.vasut@gmail.com>
+ * Copyright (C) 2010-2011 Marek Vasut <marek.vasut@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -158,7 +157,7 @@ void __init palm27x_lcd_init(int power, struct pxafb_mode_info *mode)
palm27x_lcd_screen.pxafb_lcd_power = palm27x_lcd_ctl;
}
- set_pxa_fb_info(&palm27x_lcd_screen);
+ pxa_set_fb_info(NULL, &palm27x_lcd_screen);
}
#endif
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index a09a2374697b..fb06bd047272 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -507,7 +507,7 @@ static struct pxafb_mach_info palmtc_lcd_screen = {
static void __init palmtc_lcd_init(void)
{
- set_pxa_fb_info(&palmtc_lcd_screen);
+ pxa_set_fb_info(NULL, &palmtc_lcd_screen);
}
#else
static inline void palmtc_lcd_init(void) {}
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index 3f25014a136c..726f5b98dcd3 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -136,30 +136,14 @@ static struct platform_device palmte2_pxa_keys = {
/******************************************************************************
* Backlight
******************************************************************************/
+static struct gpio palmte_bl_gpios[] = {
+ { GPIO_NR_PALMTE2_BL_POWER, GPIOF_INIT_LOW, "Backlight power" },
+ { GPIO_NR_PALMTE2_LCD_POWER, GPIOF_INIT_LOW, "LCD power" },
+};
+
static int palmte2_backlight_init(struct device *dev)
{
- int ret;
-
- ret = gpio_request(GPIO_NR_PALMTE2_BL_POWER, "BL POWER");
- if (ret)
- goto err;
- ret = gpio_direction_output(GPIO_NR_PALMTE2_BL_POWER, 0);
- if (ret)
- goto err2;
- ret = gpio_request(GPIO_NR_PALMTE2_LCD_POWER, "LCD POWER");
- if (ret)
- goto err2;
- ret = gpio_direction_output(GPIO_NR_PALMTE2_LCD_POWER, 0);
- if (ret)
- goto err3;
-
- return 0;
-err3:
- gpio_free(GPIO_NR_PALMTE2_LCD_POWER);
-err2:
- gpio_free(GPIO_NR_PALMTE2_BL_POWER);
-err:
- return ret;
+ return gpio_request_array(ARRAY_AND_SIZE(palmte_bl_gpios));
}
static int palmte2_backlight_notify(struct device *dev, int brightness)
@@ -171,8 +155,7 @@ static int palmte2_backlight_notify(struct device *dev, int brightness)
static void palmte2_backlight_exit(struct device *dev)
{
- gpio_free(GPIO_NR_PALMTE2_BL_POWER);
- gpio_free(GPIO_NR_PALMTE2_LCD_POWER);
+ gpio_free_array(ARRAY_AND_SIZE(palmte_bl_gpios));
}
static struct platform_pwm_backlight_data palmte2_backlight_data = {
@@ -363,7 +346,7 @@ static void __init palmte2_init(void)
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
- set_pxa_fb_info(&palmte2_lcd_screen);
+ pxa_set_fb_info(NULL, &palmte2_lcd_screen);
pxa_set_mci_info(&palmte2_mci_platform_data);
palmte2_udc_init();
pxa_set_ac97_info(&palmte2_ac97_pdata);
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index 3010193b081e..3b8a4f37dbbe 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -30,6 +30,7 @@
#include <linux/wm97xx.h>
#include <linux/power_supply.h>
#include <linux/usb/gpio_vbus.h>
+#include <linux/i2c-gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -47,6 +48,9 @@
#include <mach/palm27x.h>
#include <mach/pm.h>
+#include <mach/camera.h>
+
+#include <media/soc_camera.h>
#include "generic.h"
#include "devices.h"
@@ -103,6 +107,28 @@ static unsigned long palmz72_pin_config[] __initdata = {
GPIO22_GPIO, /* LCD border color */
GPIO96_GPIO, /* lcd power */
+ /* PXA Camera */
+ GPIO81_CIF_DD_0,
+ GPIO48_CIF_DD_5,
+ GPIO50_CIF_DD_3,
+ GPIO51_CIF_DD_2,
+ GPIO52_CIF_DD_4,
+ GPIO53_CIF_MCLK,
+ GPIO54_CIF_PCLK,
+ GPIO55_CIF_DD_1,
+ GPIO84_CIF_FV,
+ GPIO85_CIF_LV,
+ GPIO93_CIF_DD_6,
+ GPIO108_CIF_DD_7,
+
+ GPIO56_GPIO, /* OV9640 Powerdown */
+ GPIO57_GPIO, /* OV9640 Reset */
+ GPIO91_GPIO, /* OV9640 Power */
+
+ /* I2C */
+ GPIO117_GPIO, /* I2C_SCL */
+ GPIO118_GPIO, /* I2C_SDA */
+
/* Misc. */
GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH, /* power detect */
GPIO88_GPIO, /* green led */
@@ -254,6 +280,106 @@ device_initcall(palmz72_pm_init);
#endif
/******************************************************************************
+ * SoC Camera
+ ******************************************************************************/
+#if defined(CONFIG_SOC_CAMERA_OV9640) || \
+ defined(CONFIG_SOC_CAMERA_OV9640_MODULE)
+static struct pxacamera_platform_data palmz72_pxacamera_platform_data = {
+ .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
+ PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
+ .mclk_10khz = 2600,
+};
+
+/* Board I2C devices. */
+static struct i2c_board_info palmz72_i2c_device[] = {
+ {
+ I2C_BOARD_INFO("ov9640", 0x30),
+ }
+};
+
+static int palmz72_camera_power(struct device *dev, int power)
+{
+ gpio_set_value(GPIO_NR_PALMZ72_CAM_PWDN, !power);
+ mdelay(50);
+ return 0;
+}
+
+static int palmz72_camera_reset(struct device *dev)
+{
+ gpio_set_value(GPIO_NR_PALMZ72_CAM_RESET, 1);
+ mdelay(50);
+ gpio_set_value(GPIO_NR_PALMZ72_CAM_RESET, 0);
+ mdelay(50);
+ return 0;
+}
+
+static struct soc_camera_link palmz72_iclink = {
+ .bus_id = 0, /* Match id in pxa27x_device_camera in device.c */
+ .board_info = &palmz72_i2c_device[0],
+ .i2c_adapter_id = 0,
+ .module_name = "ov96xx",
+ .power = &palmz72_camera_power,
+ .reset = &palmz72_camera_reset,
+ .flags = SOCAM_DATAWIDTH_8,
+};
+
+static struct i2c_gpio_platform_data palmz72_i2c_bus_data = {
+ .sda_pin = 118,
+ .scl_pin = 117,
+ .udelay = 10,
+ .timeout = 100,
+};
+
+static struct platform_device palmz72_i2c_bus_device = {
+ .name = "i2c-gpio",
+ .id = 0, /* we use this as a replacement for i2c-pxa */
+ .dev = {
+ .platform_data = &palmz72_i2c_bus_data,
+ }
+};
+
+static struct platform_device palmz72_camera = {
+ .name = "soc-camera-pdrv",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmz72_iclink,
+ },
+};
+
+/* Here we request the camera GPIOs and configure them. We power up the camera
+ * module, deassert the reset pin, but put it into powerdown (low to no power
+ * consumption) mode. This allows us to later bring the module up fast. */
+static struct gpio palmz72_camera_gpios[] = {
+ { GPIO_NR_PALMZ72_CAM_POWER, GPIOF_INIT_HIGH,"Camera DVDD" },
+ { GPIO_NR_PALMZ72_CAM_RESET, GPIOF_INIT_LOW, "Camera RESET" },
+ { GPIO_NR_PALMZ72_CAM_PWDN, GPIOF_INIT_LOW, "Camera PWDN" },
+};
+
+static inline void __init palmz72_cam_gpio_init(void)
+{
+ int ret;
+
+ ret = gpio_request_array(ARRAY_AND_SIZE(palmz72_camera_gpios));
+ if (!ret)
+ gpio_free_array(ARRAY_AND_SIZE(palmz72_camera_gpios));
+ else
+ printk(KERN_ERR "Camera GPIO init failed!\n");
+
+ return;
+}
+
+static void __init palmz72_camera_init(void)
+{
+ palmz72_cam_gpio_init();
+ pxa_set_camera_info(&palmz72_pxacamera_platform_data);
+ platform_device_register(&palmz72_i2c_bus_device);
+ platform_device_register(&palmz72_camera);
+}
+#else
+static inline void palmz72_camera_init(void) {}
+#endif
+
+/******************************************************************************
* Machine init
******************************************************************************/
static void __init palmz72_init(void)
@@ -276,6 +402,7 @@ static void __init palmz72_init(void)
palm27x_pmic_init();
palmz72_kpc_init();
palmz72_leds_init();
+ palmz72_camera_init();
}
MACHINE_START(PALMZ72, "Palm Zire72")
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 9dbf3ccd4150..a70fb848dcde 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -515,7 +515,7 @@ void __init pcm990_baseboard_init(void)
pcm990_init_irq();
#ifndef CONFIG_PCM990_DISPLAY_NONE
- set_pxa_fb_info(&pcm990_fbinfo);
+ pxa_set_fb_info(NULL, &pcm990_fbinfo);
#endif
platform_device_register(&pcm990_backlight_device);
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 35353af345d5..16d14fd79b4b 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -445,8 +445,7 @@ static void __init poodle_init(void)
if (ret)
pr_warning("poodle: Unable to register LoCoMo device\n");
- set_pxa_fb_parent(&poodle_locomo_device.dev);
- set_pxa_fb_info(&poodle_fb_info);
+ pxa_set_fb_info(&poodle_locomo_device.dev, &poodle_fb_info);
pxa_set_udc_info(&udc_info);
pxa_set_mci_info(&poodle_mci_platform_data);
pxa_set_ficp_info(&poodle_ficp_platform_data);
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index 47094188e029..cd1861351f75 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -597,7 +597,7 @@ static void __init raumfeld_lcd_init(void)
{
int ret;
- set_pxa_fb_info(&raumfeld_sharp_lcd_info);
+ pxa_set_fb_info(NULL, &raumfeld_sharp_lcd_info);
/* Earlier devices had the backlight regulator controlled
* via PWM, later versions use another controller for that */
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index eb83c89428ef..fee97a935122 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -473,7 +473,7 @@ static struct pxafb_mach_info saar_lcd_info = {
static void __init saar_init_lcd(void)
{
- set_pxa_fb_info(&saar_lcd_info);
+ pxa_set_fb_info(NULL, &saar_lcd_info);
}
#else
static inline void saar_init_lcd(void) {}
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 38e2c0912b9a..01c576963e94 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -724,7 +724,7 @@ static struct pxafb_mach_info spitz_pxafb_info = {
static void __init spitz_lcd_init(void)
{
- set_pxa_fb_info(&spitz_pxafb_info);
+ pxa_set_fb_info(NULL, &spitz_pxafb_info);
}
#else
static inline void spitz_lcd_init(void) {}
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index 9cecf8366db8..53d4a472b699 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -466,7 +466,7 @@ static void __init tavorevb_init_lcd(void)
{
platform_device_register(&tavorevb_backlight_devices[0]);
platform_device_register(&tavorevb_backlight_devices[1]);
- set_pxa_fb_info(&tavorevb_lcd_info);
+ pxa_set_fb_info(NULL, &tavorevb_lcd_info);
}
#else
static inline void tavorevb_init_lcd(void) {}
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index e7f64d9b4f2d..428da3ff33a5 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -100,7 +100,6 @@ pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev)
static struct clock_event_device ckevt_pxa_osmr0 = {
.name = "osmr0",
.features = CLOCK_EVT_FEAT_ONESHOT,
- .shift = 32,
.rating = 200,
.set_next_event = pxa_osmr0_set_next_event,
.set_mode = pxa_osmr0_set_mode,
@@ -135,8 +134,8 @@ static void __init pxa_timer_init(void)
init_sched_clock(&cd, pxa_update_sched_clock, 32, clock_tick_rate);
- ckevt_pxa_osmr0.mult =
- div_sc(clock_tick_rate, NSEC_PER_SEC, ckevt_pxa_osmr0.shift);
+ clocksource_calc_mult_shift(&cksrc_pxa_oscr0, clock_tick_rate, 4);
+ clockevents_calc_mult_shift(&ckevt_pxa_osmr0, clock_tick_rate, 4);
ckevt_pxa_osmr0.max_delta_ns =
clockevent_delta2ns(0x7fffffff, &ckevt_pxa_osmr0);
ckevt_pxa_osmr0.min_delta_ns =
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 5ad3807af334..5fa145778e7d 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -35,6 +35,7 @@
#include <linux/spi/pxa2xx_spi.h>
#include <linux/input/matrix_keypad.h>
#include <linux/i2c/pxa-i2c.h>
+#include <linux/usb/gpio_vbus.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
@@ -240,12 +241,20 @@ static struct scoop_pcmcia_config tosa_pcmcia_config = {
/*
* USB Device Controller
*/
-static struct pxa2xx_udc_mach_info udc_info __initdata = {
+static struct gpio_vbus_mach_info tosa_udc_info = {
.gpio_pullup = TOSA_GPIO_USB_PULLUP,
.gpio_vbus = TOSA_GPIO_USB_IN,
.gpio_vbus_inverted = 1,
};
+static struct platform_device tosa_gpio_vbus = {
+ .name = "gpio-vbus",
+ .id = -1,
+ .dev = {
+ .platform_data = &tosa_udc_info,
+ },
+};
+
/*
* MMC/SD Device
*/
@@ -891,6 +900,7 @@ static struct platform_device *devices[] __initdata = {
&tosa_bt_device,
&sharpsl_rom_device,
&wm9712_device,
+ &tosa_gpio_vbus,
};
static void tosa_poweroff(void)
@@ -937,7 +947,6 @@ static void __init tosa_init(void)
dummy = gpiochip_reserve(TOSA_TC6393XB_GPIO_BASE, 16);
pxa_set_mci_info(&tosa_mci_platform_data);
- pxa_set_udc_info(&udc_info);
pxa_set_ficp_info(&tosa_ficp_platform_data);
pxa_set_i2c_info(NULL);
pxa_set_ac97_info(NULL);
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 857bb2e63486..b9cfbebdfe9c 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -516,9 +516,9 @@ static void __init trizeps4_init(void)
pxa_set_stuart_info(NULL);
if (0) /* dont know how to determine LCD */
- set_pxa_fb_info(&sharp_lcd);
+ pxa_set_fb_info(NULL, &sharp_lcd);
else
- set_pxa_fb_info(&toshiba_lcd);
+ pxa_set_fb_info(NULL, &toshiba_lcd);
pxa_set_mci_info(&trizeps4_mci_platform_data);
#ifndef STATUS_LEDS_ON_STUART_PINS
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index 12279214c875..0fbe78df8461 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -932,7 +932,7 @@ static void __init viper_init(void)
/* Wake-up serial console */
viper_init_serial_gpio();
- set_pxa_fb_info(&fb_info);
+ pxa_set_fb_info(NULL, &fb_info);
/* v1 hardware cannot use the datacs line */
version = viper_hw_version();
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index e709fd459268..f71d377c8640 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -572,7 +572,7 @@ static void __init vpac270_lcd_init(void)
}
vpac270_lcd_screen.pxafb_lcd_power = vpac270_lcd_power;
- set_pxa_fb_info(&vpac270_lcd_screen);
+ pxa_set_fb_info(NULL, &vpac270_lcd_screen);
return;
err2:
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index aaf883754ef4..fbe9e02e2f9f 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -91,13 +91,13 @@ static unsigned long z2_pin_config[] = {
GPIO47_STUART_TXD,
/* Keypad */
- GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
- GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
- GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
- GPIO34_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
- GPIO38_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
- GPIO16_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH,
- GPIO17_KP_MKIN_6 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO100_KP_MKIN_0,
+ GPIO101_KP_MKIN_1,
+ GPIO102_KP_MKIN_2,
+ GPIO34_KP_MKIN_3,
+ GPIO38_KP_MKIN_4,
+ GPIO16_KP_MKIN_5,
+ GPIO17_KP_MKIN_6,
GPIO103_KP_MKOUT_0,
GPIO104_KP_MKOUT_1,
GPIO105_KP_MKOUT_2,
@@ -138,8 +138,7 @@ static unsigned long z2_pin_config[] = {
GPIO1_GPIO, /* Power button */
GPIO37_GPIO, /* Headphone detect */
GPIO98_GPIO, /* Lid switch */
- GPIO14_GPIO, /* WiFi Reset */
- GPIO15_GPIO, /* WiFi Power */
+ GPIO14_GPIO, /* WiFi Power */
GPIO24_GPIO, /* WiFi CS */
GPIO36_GPIO, /* WiFi IRQ */
GPIO88_GPIO, /* LCD CS */
@@ -204,7 +203,7 @@ static struct platform_pwm_backlight_data z2_backlight_data[] = {
/* Keypad Backlight */
.pwm_id = 1,
.max_brightness = 1023,
- .dft_brightness = 512,
+ .dft_brightness = 0,
.pwm_period_ns = 1260320,
},
[1] = {
@@ -271,7 +270,7 @@ static struct pxafb_mach_info z2_lcd_screen = {
static void __init z2_lcd_init(void)
{
- set_pxa_fb_info(&z2_lcd_screen);
+ pxa_set_fb_info(NULL, &z2_lcd_screen);
}
#else
static inline void z2_lcd_init(void) {}
@@ -309,12 +308,12 @@ struct gpio_led z2_gpio_leds[] = {
.active_low = 1,
}, {
.name = "z2:green:charged",
- .default_trigger = "none",
+ .default_trigger = "mmc0",
.gpio = GPIO85_ZIPITZ2_LED_CHARGED,
.active_low = 1,
}, {
.name = "z2:amber:charging",
- .default_trigger = "none",
+ .default_trigger = "Z2-charging-or-full",
.gpio = GPIO83_ZIPITZ2_LED_CHARGING,
.active_low = 1,
},
@@ -427,8 +426,22 @@ static inline void z2_mkp_init(void) {}
******************************************************************************/
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
static struct gpio_keys_button z2_pxa_buttons[] = {
- {KEY_POWER, GPIO1_ZIPITZ2_POWER_BUTTON, 0, "Power Button" },
- {KEY_CLOSE, GPIO98_ZIPITZ2_LID_BUTTON, 0, "Lid Button" },
+ {
+ .code = KEY_POWER,
+ .gpio = GPIO1_ZIPITZ2_POWER_BUTTON,
+ .active_low = 0,
+ .desc = "Power Button",
+ .wakeup = 1,
+ .type = EV_KEY,
+ },
+ {
+ .code = SW_LID,
+ .gpio = GPIO98_ZIPITZ2_LID_BUTTON,
+ .active_low = 1,
+ .desc = "Lid Switch",
+ .wakeup = 0,
+ .type = EV_SW,
+ },
};
static struct gpio_keys_platform_data z2_pxa_keys_data = {
@@ -461,9 +474,9 @@ static struct z2_battery_info batt_chip_info = {
.batt_I2C_addr = 0x55,
.batt_I2C_reg = 2,
.charge_gpio = GPIO0_ZIPITZ2_AC_DETECT,
- .min_voltage = 2400000,
- .max_voltage = 3700000,
- .batt_div = 69,
+ .min_voltage = 3475000,
+ .max_voltage = 4190000,
+ .batt_div = 59,
.batt_mult = 1000000,
.batt_tech = POWER_SUPPLY_TECHNOLOGY_LION,
.batt_name = "Z2",
@@ -497,26 +510,16 @@ static int z2_lbs_spi_setup(struct spi_device *spi)
{
int ret = 0;
- ret = gpio_request(GPIO15_ZIPITZ2_WIFI_POWER, "WiFi Power");
+ ret = gpio_request(GPIO14_ZIPITZ2_WIFI_POWER, "WiFi Power");
if (ret)
goto err;
- ret = gpio_direction_output(GPIO15_ZIPITZ2_WIFI_POWER, 1);
+ ret = gpio_direction_output(GPIO14_ZIPITZ2_WIFI_POWER, 1);
if (ret)
goto err2;
- ret = gpio_request(GPIO14_ZIPITZ2_WIFI_RESET, "WiFi Reset");
- if (ret)
- goto err2;
-
- ret = gpio_direction_output(GPIO14_ZIPITZ2_WIFI_RESET, 0);
- if (ret)
- goto err3;
-
- /* Reset the card */
+ /* Wait until card is powered on */
mdelay(180);
- gpio_set_value(GPIO14_ZIPITZ2_WIFI_RESET, 1);
- mdelay(20);
spi->bits_per_word = 16;
spi->mode = SPI_MODE_2,
@@ -525,22 +528,18 @@ static int z2_lbs_spi_setup(struct spi_device *spi)
return 0;
-err3:
- gpio_free(GPIO14_ZIPITZ2_WIFI_RESET);
err2:
- gpio_free(GPIO15_ZIPITZ2_WIFI_POWER);
+ gpio_free(GPIO14_ZIPITZ2_WIFI_POWER);
err:
return ret;
};
static int z2_lbs_spi_teardown(struct spi_device *spi)
{
- gpio_set_value(GPIO14_ZIPITZ2_WIFI_RESET, 0);
- gpio_set_value(GPIO15_ZIPITZ2_WIFI_POWER, 0);
- gpio_free(GPIO14_ZIPITZ2_WIFI_RESET);
- gpio_free(GPIO15_ZIPITZ2_WIFI_POWER);
- return 0;
+ gpio_set_value(GPIO14_ZIPITZ2_WIFI_POWER, 0);
+ gpio_free(GPIO14_ZIPITZ2_WIFI_POWER);
+ return 0;
};
static struct pxa2xx_spi_chip z2_lbs_chip_info = {
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index 730f51e57c17..5891590126f7 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -846,7 +846,7 @@ static void __init zeus_init(void)
if (zeus_setup_fb_gpios())
pr_err("Failed to setup fb gpios\n");
else
- set_pxa_fb_info(&zeus_fb_info);
+ pxa_set_fb_info(NULL, &zeus_fb_info);
pxa_set_mci_info(&zeus_mci_platform_data);
pxa_set_udc_info(&zeus_udc_info);
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index a4c784aab764..5821185f77ab 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -208,7 +208,7 @@ static void __init zylonite_init_lcd(void)
platform_device_register(&zylonite_backlight_device);
if (lcd_id & 0x20) {
- set_pxa_fb_info(&zylonite_sharp_lcd_info);
+ pxa_set_fb_info(NULL, &zylonite_sharp_lcd_info);
return;
}
@@ -220,7 +220,7 @@ static void __init zylonite_init_lcd(void)
else
zylonite_toshiba_lcd_info.modes = &toshiba_ltm04c380k_mode;
- set_pxa_fb_info(&zylonite_toshiba_lcd_info);
+ pxa_set_fb_info(NULL, &zylonite_toshiba_lcd_info);
}
#else
static inline void zylonite_init_lcd(void) {}
diff --git a/drivers/ata/pata_palmld.c b/drivers/ata/pata_palmld.c
index a2a73d953840..b86d7e22595e 100644
--- a/drivers/ata/pata_palmld.c
+++ b/drivers/ata/pata_palmld.c
@@ -33,6 +33,11 @@
#define DRV_NAME "pata_palmld"
+static struct gpio palmld_hdd_gpios[] = {
+ { GPIO_NR_PALMLD_IDE_PWEN, GPIOF_INIT_HIGH, "HDD Power" },
+ { GPIO_NR_PALMLD_IDE_RESET, GPIOF_INIT_LOW, "HDD Reset" },
+};
+
static struct scsi_host_template palmld_sht = {
ATA_PIO_SHT(DRV_NAME),
};
@@ -52,28 +57,23 @@ static __devinit int palmld_pata_probe(struct platform_device *pdev)
/* allocate host */
host = ata_host_alloc(&pdev->dev, 1);
- if (!host)
- return -ENOMEM;
+ if (!host) {
+ ret = -ENOMEM;
+ goto err1;
+ }
/* remap drive's physical memory address */
mem = devm_ioremap(&pdev->dev, PALMLD_IDE_PHYS, 0x1000);
- if (!mem)
- return -ENOMEM;
+ if (!mem) {
+ ret = -ENOMEM;
+ goto err1;
+ }
/* request and activate power GPIO, IRQ GPIO */
- ret = gpio_request(GPIO_NR_PALMLD_IDE_PWEN, "HDD PWR");
+ ret = gpio_request_array(palmld_hdd_gpios,
+ ARRAY_SIZE(palmld_hdd_gpios));
if (ret)
goto err1;
- ret = gpio_direction_output(GPIO_NR_PALMLD_IDE_PWEN, 1);
- if (ret)
- goto err2;
-
- ret = gpio_request(GPIO_NR_PALMLD_IDE_RESET, "HDD RST");
- if (ret)
- goto err2;
- ret = gpio_direction_output(GPIO_NR_PALMLD_IDE_RESET, 0);
- if (ret)
- goto err3;
/* reset the drive */
gpio_set_value(GPIO_NR_PALMLD_IDE_RESET, 0);
@@ -96,13 +96,15 @@ static __devinit int palmld_pata_probe(struct platform_device *pdev)
ata_sff_std_ports(&ap->ioaddr);
/* activate host */
- return ata_host_activate(host, 0, NULL, IRQF_TRIGGER_RISING,
+ ret = ata_host_activate(host, 0, NULL, IRQF_TRIGGER_RISING,
&palmld_sht);
+ if (ret)
+ goto err2;
+
+ return ret;
-err3:
- gpio_free(GPIO_NR_PALMLD_IDE_RESET);
err2:
- gpio_free(GPIO_NR_PALMLD_IDE_PWEN);
+ gpio_free_array(palmld_hdd_gpios, ARRAY_SIZE(palmld_hdd_gpios));
err1:
return ret;
}
@@ -116,8 +118,7 @@ static __devexit int palmld_pata_remove(struct platform_device *dev)
/* power down the HDD */
gpio_set_value(GPIO_NR_PALMLD_IDE_PWEN, 0);
- gpio_free(GPIO_NR_PALMLD_IDE_RESET);
- gpio_free(GPIO_NR_PALMLD_IDE_PWEN);
+ gpio_free_array(palmld_hdd_gpios, ARRAY_SIZE(palmld_hdd_gpios));
return 0;
}
diff --git a/drivers/pcmcia/pxa2xx_colibri.c b/drivers/pcmcia/pxa2xx_colibri.c
index a52039564e74..443cb7fc872d 100644
--- a/drivers/pcmcia/pxa2xx_colibri.c
+++ b/drivers/pcmcia/pxa2xx_colibri.c
@@ -34,14 +34,24 @@
#define COLIBRI320_DETECT_GPIO 81
#define COLIBRI320_READY_GPIO 29
-static struct {
- int reset_gpio;
- int ppen_gpio;
- int bvd1_gpio;
- int bvd2_gpio;
- int detect_gpio;
- int ready_gpio;
-} colibri_pcmcia_gpio;
+enum {
+ DETECT = 0,
+ READY = 1,
+ BVD1 = 2,
+ BVD2 = 3,
+ PPEN = 4,
+ RESET = 5,
+};
+
+/* Contents of this array are configured on-the-fly in init function */
+static struct gpio colibri_pcmcia_gpios[] = {
+ { 0, GPIOF_IN, "PCMCIA Detect" },
+ { 0, GPIOF_IN, "PCMCIA Ready" },
+ { 0, GPIOF_IN, "PCMCIA BVD1" },
+ { 0, GPIOF_IN, "PCMCIA BVD2" },
+ { 0, GPIOF_INIT_LOW, "PCMCIA PPEN" },
+ { 0, GPIOF_INIT_HIGH,"PCMCIA Reset" },
+};
static struct pcmcia_irqs colibri_irqs[] = {
{
@@ -54,88 +64,42 @@ static int colibri_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
{
int ret;
- ret = gpio_request(colibri_pcmcia_gpio.detect_gpio, "DETECT");
+ ret = gpio_request_array(colibri_pcmcia_gpios,
+ ARRAY_SIZE(colibri_pcmcia_gpios));
if (ret)
goto err1;
- ret = gpio_direction_input(colibri_pcmcia_gpio.detect_gpio);
- if (ret)
- goto err2;
-
- ret = gpio_request(colibri_pcmcia_gpio.ready_gpio, "READY");
- if (ret)
- goto err2;
- ret = gpio_direction_input(colibri_pcmcia_gpio.ready_gpio);
- if (ret)
- goto err3;
- ret = gpio_request(colibri_pcmcia_gpio.bvd1_gpio, "BVD1");
- if (ret)
- goto err3;
- ret = gpio_direction_input(colibri_pcmcia_gpio.bvd1_gpio);
- if (ret)
- goto err4;
+ colibri_irqs[0].irq = gpio_to_irq(colibri_pcmcia_gpios[DETECT].gpio);
+ skt->socket.pci_irq = gpio_to_irq(colibri_pcmcia_gpios[READY].gpio);
- ret = gpio_request(colibri_pcmcia_gpio.bvd2_gpio, "BVD2");
- if (ret)
- goto err4;
- ret = gpio_direction_input(colibri_pcmcia_gpio.bvd2_gpio);
- if (ret)
- goto err5;
-
- ret = gpio_request(colibri_pcmcia_gpio.ppen_gpio, "PPEN");
- if (ret)
- goto err5;
- ret = gpio_direction_output(colibri_pcmcia_gpio.ppen_gpio, 0);
- if (ret)
- goto err6;
-
- ret = gpio_request(colibri_pcmcia_gpio.reset_gpio, "RESET");
- if (ret)
- goto err6;
- ret = gpio_direction_output(colibri_pcmcia_gpio.reset_gpio, 1);
+ ret = soc_pcmcia_request_irqs(skt, colibri_irqs,
+ ARRAY_SIZE(colibri_irqs));
if (ret)
- goto err7;
-
- colibri_irqs[0].irq = gpio_to_irq(colibri_pcmcia_gpio.detect_gpio);
- skt->socket.pci_irq = gpio_to_irq(colibri_pcmcia_gpio.ready_gpio);
+ goto err2;
- return soc_pcmcia_request_irqs(skt, colibri_irqs,
- ARRAY_SIZE(colibri_irqs));
+ return ret;
-err7:
- gpio_free(colibri_pcmcia_gpio.detect_gpio);
-err6:
- gpio_free(colibri_pcmcia_gpio.ready_gpio);
-err5:
- gpio_free(colibri_pcmcia_gpio.bvd1_gpio);
-err4:
- gpio_free(colibri_pcmcia_gpio.bvd2_gpio);
-err3:
- gpio_free(colibri_pcmcia_gpio.reset_gpio);
err2:
- gpio_free(colibri_pcmcia_gpio.ppen_gpio);
+ gpio_free_array(colibri_pcmcia_gpios,
+ ARRAY_SIZE(colibri_pcmcia_gpios));
err1:
return ret;
}
static void colibri_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
{
- gpio_free(colibri_pcmcia_gpio.detect_gpio);
- gpio_free(colibri_pcmcia_gpio.ready_gpio);
- gpio_free(colibri_pcmcia_gpio.bvd1_gpio);
- gpio_free(colibri_pcmcia_gpio.bvd2_gpio);
- gpio_free(colibri_pcmcia_gpio.reset_gpio);
- gpio_free(colibri_pcmcia_gpio.ppen_gpio);
+ gpio_free_array(colibri_pcmcia_gpios,
+ ARRAY_SIZE(colibri_pcmcia_gpios));
}
static void colibri_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
struct pcmcia_state *state)
{
- state->detect = !!gpio_get_value(colibri_pcmcia_gpio.detect_gpio);
- state->ready = !!gpio_get_value(colibri_pcmcia_gpio.ready_gpio);
- state->bvd1 = !!gpio_get_value(colibri_pcmcia_gpio.bvd1_gpio);
- state->bvd2 = !!gpio_get_value(colibri_pcmcia_gpio.bvd2_gpio);
+ state->detect = !!gpio_get_value(colibri_pcmcia_gpios[DETECT].gpio);
+ state->ready = !!gpio_get_value(colibri_pcmcia_gpios[READY].gpio);
+ state->bvd1 = !!gpio_get_value(colibri_pcmcia_gpios[BVD1].gpio);
+ state->bvd2 = !!gpio_get_value(colibri_pcmcia_gpios[BVD2].gpio);
state->wrprot = 0;
state->vs_3v = 1;
state->vs_Xv = 0;
@@ -145,9 +109,10 @@ static int
colibri_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
const socket_state_t *state)
{
- gpio_set_value(colibri_pcmcia_gpio.ppen_gpio,
+ gpio_set_value(colibri_pcmcia_gpios[PPEN].gpio,
!(state->Vcc == 33 && state->Vpp < 50));
- gpio_set_value(colibri_pcmcia_gpio.reset_gpio, state->flags & SS_RESET);
+ gpio_set_value(colibri_pcmcia_gpios[RESET].gpio,
+ state->flags & SS_RESET);
return 0;
}
@@ -190,20 +155,20 @@ static int __init colibri_pcmcia_init(void)
/* Colibri PXA270 */
if (machine_is_colibri()) {
- colibri_pcmcia_gpio.reset_gpio = COLIBRI270_RESET_GPIO;
- colibri_pcmcia_gpio.ppen_gpio = COLIBRI270_PPEN_GPIO;
- colibri_pcmcia_gpio.bvd1_gpio = COLIBRI270_BVD1_GPIO;
- colibri_pcmcia_gpio.bvd2_gpio = COLIBRI270_BVD2_GPIO;
- colibri_pcmcia_gpio.detect_gpio = COLIBRI270_DETECT_GPIO;
- colibri_pcmcia_gpio.ready_gpio = COLIBRI270_READY_GPIO;
+ colibri_pcmcia_gpios[RESET].gpio = COLIBRI270_RESET_GPIO;
+ colibri_pcmcia_gpios[PPEN].gpio = COLIBRI270_PPEN_GPIO;
+ colibri_pcmcia_gpios[BVD1].gpio = COLIBRI270_BVD1_GPIO;
+ colibri_pcmcia_gpios[BVD2].gpio = COLIBRI270_BVD2_GPIO;
+ colibri_pcmcia_gpios[DETECT].gpio = COLIBRI270_DETECT_GPIO;
+ colibri_pcmcia_gpios[READY].gpio = COLIBRI270_READY_GPIO;
/* Colibri PXA320 */
} else if (machine_is_colibri320()) {
- colibri_pcmcia_gpio.reset_gpio = COLIBRI320_RESET_GPIO;
- colibri_pcmcia_gpio.ppen_gpio = COLIBRI320_PPEN_GPIO;
- colibri_pcmcia_gpio.bvd1_gpio = COLIBRI320_BVD1_GPIO;
- colibri_pcmcia_gpio.bvd2_gpio = COLIBRI320_BVD2_GPIO;
- colibri_pcmcia_gpio.detect_gpio = COLIBRI320_DETECT_GPIO;
- colibri_pcmcia_gpio.ready_gpio = COLIBRI320_READY_GPIO;
+ colibri_pcmcia_gpios[RESET].gpio = COLIBRI320_RESET_GPIO;
+ colibri_pcmcia_gpios[PPEN].gpio = COLIBRI320_PPEN_GPIO;
+ colibri_pcmcia_gpios[BVD1].gpio = COLIBRI320_BVD1_GPIO;
+ colibri_pcmcia_gpios[BVD2].gpio = COLIBRI320_BVD2_GPIO;
+ colibri_pcmcia_gpios[DETECT].gpio = COLIBRI320_DETECT_GPIO;
+ colibri_pcmcia_gpios[READY].gpio = COLIBRI320_READY_GPIO;
}
ret = platform_device_add_data(colibri_pcmcia_device,
diff --git a/drivers/pcmcia/pxa2xx_palmld.c b/drivers/pcmcia/pxa2xx_palmld.c
index 6fb6f7f0672e..69f73670949a 100644
--- a/drivers/pcmcia/pxa2xx_palmld.c
+++ b/drivers/pcmcia/pxa2xx_palmld.c
@@ -4,7 +4,7 @@
* Driver for Palm LifeDrive PCMCIA
*
* Copyright (C) 2006 Alex Osborne <ato@meshy.org>
- * Copyright (C) 2007-2008 Marek Vasut <marek.vasut@gmail.com>
+ * Copyright (C) 2007-2011 Marek Vasut <marek.vasut@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -20,49 +20,27 @@
#include <mach/palmld.h>
#include "soc_common.h"
+static struct gpio palmld_pcmcia_gpios[] = {
+ { GPIO_NR_PALMLD_PCMCIA_POWER, GPIOF_INIT_LOW, "PCMCIA Power" },
+ { GPIO_NR_PALMLD_PCMCIA_RESET, GPIOF_INIT_HIGH,"PCMCIA Reset" },
+ { GPIO_NR_PALMLD_PCMCIA_READY, GPIOF_IN, "PCMCIA Ready" },
+};
+
static int palmld_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
{
int ret;
- ret = gpio_request(GPIO_NR_PALMLD_PCMCIA_POWER, "PCMCIA PWR");
- if (ret)
- goto err1;
- ret = gpio_direction_output(GPIO_NR_PALMLD_PCMCIA_POWER, 0);
- if (ret)
- goto err2;
-
- ret = gpio_request(GPIO_NR_PALMLD_PCMCIA_RESET, "PCMCIA RST");
- if (ret)
- goto err2;
- ret = gpio_direction_output(GPIO_NR_PALMLD_PCMCIA_RESET, 1);
- if (ret)
- goto err3;
-
- ret = gpio_request(GPIO_NR_PALMLD_PCMCIA_READY, "PCMCIA RDY");
- if (ret)
- goto err3;
- ret = gpio_direction_input(GPIO_NR_PALMLD_PCMCIA_READY);
- if (ret)
- goto err4;
+ ret = gpio_request_array(palmld_pcmcia_gpios,
+ ARRAY_SIZE(palmld_pcmcia_gpios));
skt->socket.pci_irq = IRQ_GPIO(GPIO_NR_PALMLD_PCMCIA_READY);
- return 0;
-err4:
- gpio_free(GPIO_NR_PALMLD_PCMCIA_READY);
-err3:
- gpio_free(GPIO_NR_PALMLD_PCMCIA_RESET);
-err2:
- gpio_free(GPIO_NR_PALMLD_PCMCIA_POWER);
-err1:
return ret;
}
static void palmld_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
{
- gpio_free(GPIO_NR_PALMLD_PCMCIA_READY);
- gpio_free(GPIO_NR_PALMLD_PCMCIA_RESET);
- gpio_free(GPIO_NR_PALMLD_PCMCIA_POWER);
+ gpio_free_array(palmld_pcmcia_gpios, ARRAY_SIZE(palmld_pcmcia_gpios));
}
static void palmld_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
diff --git a/drivers/pcmcia/pxa2xx_palmtc.c b/drivers/pcmcia/pxa2xx_palmtc.c
index 459a232d66be..d0ad6a76bbde 100644
--- a/drivers/pcmcia/pxa2xx_palmtc.c
+++ b/drivers/pcmcia/pxa2xx_palmtc.c
@@ -4,7 +4,7 @@
* Driver for Palm Tungsten|C PCMCIA
*
* Copyright (C) 2008 Alex Osborne <ato@meshy.org>
- * Copyright (C) 2009 Marek Vasut <marek.vasut@gmail.com>
+ * Copyright (C) 2009-2011 Marek Vasut <marek.vasut@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -21,79 +21,30 @@
#include <mach/palmtc.h>
#include "soc_common.h"
+static struct gpio palmtc_pcmcia_gpios[] = {
+ { GPIO_NR_PALMTC_PCMCIA_POWER1, GPIOF_INIT_LOW, "PCMCIA Power 1" },
+ { GPIO_NR_PALMTC_PCMCIA_POWER2, GPIOF_INIT_LOW, "PCMCIA Power 2" },
+ { GPIO_NR_PALMTC_PCMCIA_POWER3, GPIOF_INIT_LOW, "PCMCIA Power 3" },
+ { GPIO_NR_PALMTC_PCMCIA_RESET, GPIOF_INIT_HIGH,"PCMCIA Reset" },
+ { GPIO_NR_PALMTC_PCMCIA_READY, GPIOF_IN, "PCMCIA Ready" },
+ { GPIO_NR_PALMTC_PCMCIA_PWRREADY, GPIOF_IN, "PCMCIA Power Ready" },
+};
+
static int palmtc_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
{
int ret;
- ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_POWER1, "PCMCIA PWR1");
- if (ret)
- goto err1;
- ret = gpio_direction_output(GPIO_NR_PALMTC_PCMCIA_POWER1, 0);
- if (ret)
- goto err2;
-
- ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_POWER2, "PCMCIA PWR2");
- if (ret)
- goto err2;
- ret = gpio_direction_output(GPIO_NR_PALMTC_PCMCIA_POWER2, 0);
- if (ret)
- goto err3;
-
- ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_POWER3, "PCMCIA PWR3");
- if (ret)
- goto err3;
- ret = gpio_direction_output(GPIO_NR_PALMTC_PCMCIA_POWER3, 0);
- if (ret)
- goto err4;
-
- ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_RESET, "PCMCIA RST");
- if (ret)
- goto err4;
- ret = gpio_direction_output(GPIO_NR_PALMTC_PCMCIA_RESET, 1);
- if (ret)
- goto err5;
-
- ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_READY, "PCMCIA RDY");
- if (ret)
- goto err5;
- ret = gpio_direction_input(GPIO_NR_PALMTC_PCMCIA_READY);
- if (ret)
- goto err6;
-
- ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_PWRREADY, "PCMCIA PWRRDY");
- if (ret)
- goto err6;
- ret = gpio_direction_input(GPIO_NR_PALMTC_PCMCIA_PWRREADY);
- if (ret)
- goto err7;
+ ret = gpio_request_array(palmtc_pcmcia_gpios,
+ ARRAY_SIZE(palmtc_pcmcia_gpios));
skt->socket.pci_irq = IRQ_GPIO(GPIO_NR_PALMTC_PCMCIA_READY);
- return 0;
-err7:
- gpio_free(GPIO_NR_PALMTC_PCMCIA_PWRREADY);
-err6:
- gpio_free(GPIO_NR_PALMTC_PCMCIA_READY);
-err5:
- gpio_free(GPIO_NR_PALMTC_PCMCIA_RESET);
-err4:
- gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER3);
-err3:
- gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER2);
-err2:
- gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER1);
-err1:
return ret;
}
static void palmtc_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
{
- gpio_free(GPIO_NR_PALMTC_PCMCIA_PWRREADY);
- gpio_free(GPIO_NR_PALMTC_PCMCIA_READY);
- gpio_free(GPIO_NR_PALMTC_PCMCIA_RESET);
- gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER3);
- gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER2);
- gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER1);
+ gpio_free_array(palmtc_pcmcia_gpios, ARRAY_SIZE(palmtc_pcmcia_gpios));
}
static void palmtc_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
diff --git a/drivers/pcmcia/pxa2xx_palmtx.c b/drivers/pcmcia/pxa2xx_palmtx.c
index b07b247a399f..1a2580450402 100644
--- a/drivers/pcmcia/pxa2xx_palmtx.c
+++ b/drivers/pcmcia/pxa2xx_palmtx.c
@@ -3,7 +3,7 @@
*
* Driver for Palm T|X PCMCIA
*
- * Copyright (C) 2007-2008 Marek Vasut <marek.vasut@gmail.com>
+ * Copyright (C) 2007-2011 Marek Vasut <marek.vasut@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -13,67 +13,34 @@
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/gpio.h>
#include <asm/mach-types.h>
-
-#include <mach/gpio.h>
#include <mach/palmtx.h>
-
#include "soc_common.h"
+static struct gpio palmtx_pcmcia_gpios[] = {
+ { GPIO_NR_PALMTX_PCMCIA_POWER1, GPIOF_INIT_LOW, "PCMCIA Power 1" },
+ { GPIO_NR_PALMTX_PCMCIA_POWER2, GPIOF_INIT_LOW, "PCMCIA Power 2" },
+ { GPIO_NR_PALMTX_PCMCIA_RESET, GPIOF_INIT_HIGH,"PCMCIA Reset" },
+ { GPIO_NR_PALMTX_PCMCIA_READY, GPIOF_IN, "PCMCIA Ready" },
+};
+
static int palmtx_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
{
int ret;
- ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_POWER1, "PCMCIA PWR1");
- if (ret)
- goto err1;
- ret = gpio_direction_output(GPIO_NR_PALMTX_PCMCIA_POWER1, 0);
- if (ret)
- goto err2;
-
- ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_POWER2, "PCMCIA PWR2");
- if (ret)
- goto err2;
- ret = gpio_direction_output(GPIO_NR_PALMTX_PCMCIA_POWER2, 0);
- if (ret)
- goto err3;
-
- ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_RESET, "PCMCIA RST");
- if (ret)
- goto err3;
- ret = gpio_direction_output(GPIO_NR_PALMTX_PCMCIA_RESET, 1);
- if (ret)
- goto err4;
-
- ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_READY, "PCMCIA RDY");
- if (ret)
- goto err4;
- ret = gpio_direction_input(GPIO_NR_PALMTX_PCMCIA_READY);
- if (ret)
- goto err5;
+ ret = gpio_request_array(palmtx_pcmcia_gpios,
+ ARRAY_SIZE(palmtx_pcmcia_gpios));
skt->socket.pci_irq = gpio_to_irq(GPIO_NR_PALMTX_PCMCIA_READY);
- return 0;
-err5:
- gpio_free(GPIO_NR_PALMTX_PCMCIA_READY);
-err4:
- gpio_free(GPIO_NR_PALMTX_PCMCIA_RESET);
-err3:
- gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER2);
-err2:
- gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER1);
-err1:
return ret;
}
static void palmtx_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
{
- gpio_free(GPIO_NR_PALMTX_PCMCIA_READY);
- gpio_free(GPIO_NR_PALMTX_PCMCIA_RESET);
- gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER2);
- gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER1);
+ gpio_free_array(palmtx_pcmcia_gpios, ARRAY_SIZE(palmtx_pcmcia_gpios));
}
static void palmtx_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
diff --git a/drivers/pcmcia/pxa2xx_vpac270.c b/drivers/pcmcia/pxa2xx_vpac270.c
index 55627eccee8e..435002dfc3ca 100644
--- a/drivers/pcmcia/pxa2xx_vpac270.c
+++ b/drivers/pcmcia/pxa2xx_vpac270.c
@@ -3,8 +3,7 @@
*
* Driver for Voipac PXA270 PCMCIA and CF sockets
*
- * Copyright (C) 2010
- * Marek Vasut <marek.vasut@gmail.com>
+ * Copyright (C) 2010-2011 Marek Vasut <marek.vasut@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -22,6 +21,19 @@
#include "soc_common.h"
+static struct gpio vpac270_pcmcia_gpios[] = {
+ { GPIO84_VPAC270_PCMCIA_CD, GPIOF_IN, "PCMCIA Card Detect" },
+ { GPIO35_VPAC270_PCMCIA_RDY, GPIOF_IN, "PCMCIA Ready" },
+ { GPIO107_VPAC270_PCMCIA_PPEN, GPIOF_INIT_LOW, "PCMCIA PPEN" },
+ { GPIO11_VPAC270_PCMCIA_RESET, GPIOF_INIT_LOW, "PCMCIA Reset" },
+};
+
+static struct gpio vpac270_cf_gpios[] = {
+ { GPIO17_VPAC270_CF_CD, GPIOF_IN, "CF Card Detect" },
+ { GPIO12_VPAC270_CF_RDY, GPIOF_IN, "CF Ready" },
+ { GPIO16_VPAC270_CF_RESET, GPIOF_INIT_LOW, "CF Reset" },
+};
+
static struct pcmcia_irqs cd_irqs[] = {
{
.sock = 0,
@@ -40,96 +52,34 @@ static int vpac270_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
int ret;
if (skt->nr == 0) {
- ret = gpio_request(GPIO84_VPAC270_PCMCIA_CD, "PCMCIA CD");
- if (ret)
- goto err1;
- ret = gpio_direction_input(GPIO84_VPAC270_PCMCIA_CD);
- if (ret)
- goto err2;
-
- ret = gpio_request(GPIO35_VPAC270_PCMCIA_RDY, "PCMCIA RDY");
- if (ret)
- goto err2;
- ret = gpio_direction_input(GPIO35_VPAC270_PCMCIA_RDY);
- if (ret)
- goto err3;
-
- ret = gpio_request(GPIO107_VPAC270_PCMCIA_PPEN, "PCMCIA PPEN");
- if (ret)
- goto err3;
- ret = gpio_direction_output(GPIO107_VPAC270_PCMCIA_PPEN, 0);
- if (ret)
- goto err4;
-
- ret = gpio_request(GPIO11_VPAC270_PCMCIA_RESET, "PCMCIA RESET");
- if (ret)
- goto err4;
- ret = gpio_direction_output(GPIO11_VPAC270_PCMCIA_RESET, 0);
- if (ret)
- goto err5;
+ ret = gpio_request_array(vpac270_pcmcia_gpios,
+ ARRAY_SIZE(vpac270_pcmcia_gpios));
skt->socket.pci_irq = gpio_to_irq(GPIO35_VPAC270_PCMCIA_RDY);
- return soc_pcmcia_request_irqs(skt, &cd_irqs[0], 1);
-
-err5:
- gpio_free(GPIO11_VPAC270_PCMCIA_RESET);
-err4:
- gpio_free(GPIO107_VPAC270_PCMCIA_PPEN);
-err3:
- gpio_free(GPIO35_VPAC270_PCMCIA_RDY);
-err2:
- gpio_free(GPIO84_VPAC270_PCMCIA_CD);
-err1:
- return ret;
-
+ if (!ret)
+ ret = soc_pcmcia_request_irqs(skt, &cd_irqs[0], 1);
} else {
- ret = gpio_request(GPIO17_VPAC270_CF_CD, "CF CD");
- if (ret)
- goto err6;
- ret = gpio_direction_input(GPIO17_VPAC270_CF_CD);
- if (ret)
- goto err7;
-
- ret = gpio_request(GPIO12_VPAC270_CF_RDY, "CF RDY");
- if (ret)
- goto err7;
- ret = gpio_direction_input(GPIO12_VPAC270_CF_RDY);
- if (ret)
- goto err8;
-
- ret = gpio_request(GPIO16_VPAC270_CF_RESET, "CF RESET");
- if (ret)
- goto err8;
- ret = gpio_direction_output(GPIO16_VPAC270_CF_RESET, 0);
- if (ret)
- goto err9;
+ ret = gpio_request_array(vpac270_cf_gpios,
+ ARRAY_SIZE(vpac270_cf_gpios));
skt->socket.pci_irq = gpio_to_irq(GPIO12_VPAC270_CF_RDY);
- return soc_pcmcia_request_irqs(skt, &cd_irqs[1], 1);
-
-err9:
- gpio_free(GPIO16_VPAC270_CF_RESET);
-err8:
- gpio_free(GPIO12_VPAC270_CF_RDY);
-err7:
- gpio_free(GPIO17_VPAC270_CF_CD);
-err6:
- return ret;
-
+ if (!ret)
+ ret = soc_pcmcia_request_irqs(skt, &cd_irqs[1], 1);
}
+
+ return ret;
}
static void vpac270_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
{
- gpio_free(GPIO11_VPAC270_PCMCIA_RESET);
- gpio_free(GPIO107_VPAC270_PCMCIA_PPEN);
- gpio_free(GPIO35_VPAC270_PCMCIA_RDY);
- gpio_free(GPIO84_VPAC270_PCMCIA_CD);
- gpio_free(GPIO16_VPAC270_CF_RESET);
- gpio_free(GPIO12_VPAC270_CF_RDY);
- gpio_free(GPIO17_VPAC270_CF_CD);
+ if (skt->nr == 0)
+ gpio_request_array(vpac270_pcmcia_gpios,
+ ARRAY_SIZE(vpac270_pcmcia_gpios));
+ else
+ gpio_request_array(vpac270_cf_gpios,
+ ARRAY_SIZE(vpac270_cf_gpios));
}
static void vpac270_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index b37f92cb71bc..444b60aa15e9 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -139,24 +139,6 @@ static const char ep0name [] = "ep0";
static void pxa25x_ep_fifo_flush (struct usb_ep *ep);
static void nuke (struct pxa25x_ep *, int status);
-/* one GPIO should be used to detect VBUS from the host */
-static int is_vbus_present(void)
-{
- struct pxa2xx_udc_mach_info *mach = the_controller->mach;
-
- if (gpio_is_valid(mach->gpio_vbus)) {
- int value = gpio_get_value(mach->gpio_vbus);
-
- if (mach->gpio_vbus_inverted)
- return !value;
- else
- return !!value;
- }
- if (mach->udc_is_connected)
- return mach->udc_is_connected();
- return 1;
-}
-
/* one GPIO should control a D+ pullup, so host sees this device (or not) */
static void pullup_off(void)
{
@@ -1055,7 +1037,7 @@ udc_seq_show(struct seq_file *m, void *_d)
"%s version: %s\nGadget driver: %s\nHost %s\n\n",
driver_name, DRIVER_VERSION SIZE_STR "(pio)",
dev->driver ? dev->driver->driver.name : "(none)",
- is_vbus_present() ? "full speed" : "disconnected");
+ dev->gadget.speed == USB_SPEED_FULL ? "full speed" : "disconnected");
/* registers for device and ep0 */
seq_printf(m,
@@ -1094,7 +1076,7 @@ udc_seq_show(struct seq_file *m, void *_d)
(tmp & UDCCFR_ACM) ? " acm" : "");
}
- if (!is_vbus_present() || !dev->driver)
+ if (dev->gadget.speed != USB_SPEED_FULL || !dev->driver)
goto done;
seq_printf(m, "ep0 IN %lu/%lu, OUT %lu/%lu\nirqs %lu\n\n",
@@ -1435,14 +1417,6 @@ lubbock_vbus_irq(int irq, void *_dev)
#endif
-static irqreturn_t udc_vbus_irq(int irq, void *_dev)
-{
- struct pxa25x_udc *dev = _dev;
-
- pxa25x_udc_vbus_session(&dev->gadget, is_vbus_present());
- return IRQ_HANDLED;
-}
-
/*-------------------------------------------------------------------------*/
@@ -1766,12 +1740,9 @@ pxa25x_udc_irq(int irq, void *_dev)
if (unlikely(udccr & UDCCR_SUSIR)) {
udc_ack_int_UDCCR(UDCCR_SUSIR);
handled = 1;
- DBG(DBG_VERBOSE, "USB suspend%s\n", is_vbus_present()
- ? "" : "+disconnect");
+ DBG(DBG_VERBOSE, "USB suspend\n");
- if (!is_vbus_present())
- stop_activity(dev, dev->driver);
- else if (dev->gadget.speed != USB_SPEED_UNKNOWN
+ if (dev->gadget.speed != USB_SPEED_UNKNOWN
&& dev->driver
&& dev->driver->suspend)
dev->driver->suspend(&dev->gadget);
@@ -1786,8 +1757,7 @@ pxa25x_udc_irq(int irq, void *_dev)
if (dev->gadget.speed != USB_SPEED_UNKNOWN
&& dev->driver
- && dev->driver->resume
- && is_vbus_present())
+ && dev->driver->resume)
dev->driver->resume(&dev->gadget);
}
@@ -2137,7 +2107,7 @@ static struct pxa25x_udc memory = {
static int __init pxa25x_udc_probe(struct platform_device *pdev)
{
struct pxa25x_udc *dev = &memory;
- int retval, vbus_irq, irq;
+ int retval, irq;
u32 chiprev;
/* insist on Intel/ARM/XScale */
@@ -2199,19 +2169,6 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev)
dev->transceiver = otg_get_transceiver();
- if (gpio_is_valid(dev->mach->gpio_vbus)) {
- if ((retval = gpio_request(dev->mach->gpio_vbus,
- "pxa25x_udc GPIO VBUS"))) {
- dev_dbg(&pdev->dev,
- "can't get vbus gpio %d, err: %d\n",
- dev->mach->gpio_vbus, retval);
- goto err_gpio_vbus;
- }
- gpio_direction_input(dev->mach->gpio_vbus);
- vbus_irq = gpio_to_irq(dev->mach->gpio_vbus);
- } else
- vbus_irq = 0;
-
if (gpio_is_valid(dev->mach->gpio_pullup)) {
if ((retval = gpio_request(dev->mach->gpio_pullup,
"pca25x_udc GPIO PULLUP"))) {
@@ -2237,7 +2194,7 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev)
udc_disable(dev);
udc_reinit(dev);
- dev->vbus = !!is_vbus_present();
+ dev->vbus = 0;
/* irq setup after old hardware state is cleaned up */
retval = request_irq(irq, pxa25x_udc_irq,
@@ -2273,22 +2230,10 @@ lubbock_fail0:
}
} else
#endif
- if (vbus_irq) {
- retval = request_irq(vbus_irq, udc_vbus_irq,
- IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- driver_name, dev);
- if (retval != 0) {
- pr_err("%s: can't get irq %i, err %d\n",
- driver_name, vbus_irq, retval);
- goto err_vbus_irq;
- }
- }
create_debug_files(dev);
return 0;
- err_vbus_irq:
#ifdef CONFIG_ARCH_LUBBOCK
free_irq(LUBBOCK_USB_DISC_IRQ, dev);
err_irq_lub:
@@ -2298,9 +2243,6 @@ lubbock_fail0:
if (gpio_is_valid(dev->mach->gpio_pullup))
gpio_free(dev->mach->gpio_pullup);
err_gpio_pullup:
- if (gpio_is_valid(dev->mach->gpio_vbus))
- gpio_free(dev->mach->gpio_vbus);
- err_gpio_vbus:
if (dev->transceiver) {
otg_put_transceiver(dev->transceiver);
dev->transceiver = NULL;
@@ -2337,10 +2279,6 @@ static int __exit pxa25x_udc_remove(struct platform_device *pdev)
free_irq(LUBBOCK_USB_IRQ, dev);
}
#endif
- if (gpio_is_valid(dev->mach->gpio_vbus)) {
- free_irq(gpio_to_irq(dev->mach->gpio_vbus), dev);
- gpio_free(dev->mach->gpio_vbus);
- }
if (gpio_is_valid(dev->mach->gpio_pullup))
gpio_free(dev->mach->gpio_pullup);
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 825b665245bb..a2e5b5100ab4 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -627,7 +627,12 @@ static void overlay1fb_enable(struct pxafb_layer *ofb)
static void overlay1fb_disable(struct pxafb_layer *ofb)
{
- uint32_t lccr5 = lcd_readl(ofb->fbi, LCCR5);
+ uint32_t lccr5;
+
+ if (!(lcd_readl(ofb->fbi, OVL1C1) & OVLxC1_OEN))
+ return;
+
+ lccr5 = lcd_readl(ofb->fbi, LCCR5);
lcd_writel(ofb->fbi, OVL1C1, ofb->control[0] & ~OVLxC1_OEN);
@@ -685,7 +690,12 @@ static void overlay2fb_enable(struct pxafb_layer *ofb)
static void overlay2fb_disable(struct pxafb_layer *ofb)
{
- uint32_t lccr5 = lcd_readl(ofb->fbi, LCCR5);
+ uint32_t lccr5;
+
+ if (!(lcd_readl(ofb->fbi, OVL2C1) & OVLxC1_OEN))
+ return;
+
+ lccr5 = lcd_readl(ofb->fbi, LCCR5);
lcd_writel(ofb->fbi, OVL2C1, ofb->control[0] & ~OVLxC1_OEN);
@@ -720,12 +730,10 @@ static int overlayfb_open(struct fb_info *info, int user)
if (user == 0)
return -ENODEV;
- /* allow only one user at a time */
- if (atomic_inc_and_test(&ofb->usage))
- return -EBUSY;
+ if (ofb->usage++ == 0)
+ /* unblank the base framebuffer */
+ fb_blank(&ofb->fbi->fb, FB_BLANK_UNBLANK);
- /* unblank the base framebuffer */
- fb_blank(&ofb->fbi->fb, FB_BLANK_UNBLANK);
return 0;
}
@@ -733,12 +741,15 @@ static int overlayfb_release(struct fb_info *info, int user)
{
struct pxafb_layer *ofb = (struct pxafb_layer*) info;
- atomic_dec(&ofb->usage);
- ofb->ops->disable(ofb);
+ if (ofb->usage == 1) {
+ ofb->ops->disable(ofb);
+ ofb->fb.var.height = -1;
+ ofb->fb.var.width = -1;
+ ofb->fb.var.xres = ofb->fb.var.xres_virtual = 0;
+ ofb->fb.var.yres = ofb->fb.var.yres_virtual = 0;
- free_pages_exact(ofb->video_mem, ofb->video_mem_size);
- ofb->video_mem = NULL;
- ofb->video_mem_size = 0;
+ ofb->usage--;
+ }
return 0;
}
@@ -750,7 +761,7 @@ static int overlayfb_check_var(struct fb_var_screeninfo *var,
int xpos, ypos, pfor, bpp;
xpos = NONSTD_TO_XPOS(var->nonstd);
- ypos = NONSTD_TO_XPOS(var->nonstd);
+ ypos = NONSTD_TO_YPOS(var->nonstd);
pfor = NONSTD_TO_PFOR(var->nonstd);
bpp = pxafb_var_to_bpp(var);
@@ -794,7 +805,7 @@ static int overlayfb_check_var(struct fb_var_screeninfo *var,
return 0;
}
-static int overlayfb_map_video_memory(struct pxafb_layer *ofb)
+static int overlayfb_check_video_memory(struct pxafb_layer *ofb)
{
struct fb_var_screeninfo *var = &ofb->fb.var;
int pfor = NONSTD_TO_PFOR(var->nonstd);
@@ -812,27 +823,11 @@ static int overlayfb_map_video_memory(struct pxafb_layer *ofb)
size = PAGE_ALIGN(ofb->fb.fix.line_length * var->yres_virtual);
- /* don't re-allocate if the original video memory is enough */
if (ofb->video_mem) {
if (ofb->video_mem_size >= size)
return 0;
-
- free_pages_exact(ofb->video_mem, ofb->video_mem_size);
}
-
- ofb->video_mem = alloc_pages_exact(size, GFP_KERNEL | __GFP_ZERO);
- if (ofb->video_mem == NULL)
- return -ENOMEM;
-
- ofb->video_mem_phys = virt_to_phys(ofb->video_mem);
- ofb->video_mem_size = size;
-
- mutex_lock(&ofb->fb.mm_lock);
- ofb->fb.fix.smem_start = ofb->video_mem_phys;
- ofb->fb.fix.smem_len = ofb->fb.fix.line_length * var->yres_virtual;
- mutex_unlock(&ofb->fb.mm_lock);
- ofb->fb.screen_base = ofb->video_mem;
- return 0;
+ return -EINVAL;
}
static int overlayfb_set_par(struct fb_info *info)
@@ -841,13 +836,13 @@ static int overlayfb_set_par(struct fb_info *info)
struct fb_var_screeninfo *var = &info->var;
int xpos, ypos, pfor, bpp, ret;
- ret = overlayfb_map_video_memory(ofb);
+ ret = overlayfb_check_video_memory(ofb);
if (ret)
return ret;
bpp = pxafb_var_to_bpp(var);
xpos = NONSTD_TO_XPOS(var->nonstd);
- ypos = NONSTD_TO_XPOS(var->nonstd);
+ ypos = NONSTD_TO_YPOS(var->nonstd);
pfor = NONSTD_TO_PFOR(var->nonstd);
ofb->control[0] = OVLxC1_PPL(var->xres) | OVLxC1_LPO(var->yres) |
@@ -891,7 +886,7 @@ static void __devinit init_pxafb_overlay(struct pxafb_info *fbi,
ofb->id = id;
ofb->ops = &ofb_ops[id];
- atomic_set(&ofb->usage, 0);
+ ofb->usage = 0;
ofb->fbi = fbi;
init_completion(&ofb->branch_done);
}
@@ -904,29 +899,60 @@ static inline int pxafb_overlay_supported(void)
return 0;
}
-static int __devinit pxafb_overlay_init(struct pxafb_info *fbi)
+static int __devinit pxafb_overlay_map_video_memory(struct pxafb_info *pxafb,
+ struct pxafb_layer *ofb)
+{
+ /* We assume that user will use at most video_mem_size for overlay fb,
+ * anyway, it's useless to use 16bpp main plane and 24bpp overlay
+ */
+ ofb->video_mem = alloc_pages_exact(PAGE_ALIGN(pxafb->video_mem_size),
+ GFP_KERNEL | __GFP_ZERO);
+ if (ofb->video_mem == NULL)
+ return -ENOMEM;
+
+ ofb->video_mem_phys = virt_to_phys(ofb->video_mem);
+ ofb->video_mem_size = PAGE_ALIGN(pxafb->video_mem_size);
+
+ mutex_lock(&ofb->fb.mm_lock);
+ ofb->fb.fix.smem_start = ofb->video_mem_phys;
+ ofb->fb.fix.smem_len = pxafb->video_mem_size;
+ mutex_unlock(&ofb->fb.mm_lock);
+
+ ofb->fb.screen_base = ofb->video_mem;
+
+ return 0;
+}
+
+static void __devinit pxafb_overlay_init(struct pxafb_info *fbi)
{
int i, ret;
if (!pxafb_overlay_supported())
- return 0;
+ return;
for (i = 0; i < 2; i++) {
- init_pxafb_overlay(fbi, &fbi->overlay[i], i);
- ret = register_framebuffer(&fbi->overlay[i].fb);
+ struct pxafb_layer *ofb = &fbi->overlay[i];
+ init_pxafb_overlay(fbi, ofb, i);
+ ret = register_framebuffer(&ofb->fb);
if (ret) {
dev_err(fbi->dev, "failed to register overlay %d\n", i);
- return ret;
+ continue;
}
+ ret = pxafb_overlay_map_video_memory(fbi, ofb);
+ if (ret) {
+ dev_err(fbi->dev,
+ "failed to map video memory for overlay %d\n",
+ i);
+ unregister_framebuffer(&ofb->fb);
+ continue;
+ }
+ ofb->registered = 1;
}
/* mask all IU/BS/EOF/SOF interrupts */
lcd_writel(fbi, LCCR5, ~0);
- /* place overlay(s) on top of base */
- fbi->lccr0 |= LCCR0_OUC;
pr_info("PXA Overlay driver loaded successfully!\n");
- return 0;
}
static void __devexit pxafb_overlay_exit(struct pxafb_info *fbi)
@@ -936,8 +962,15 @@ static void __devexit pxafb_overlay_exit(struct pxafb_info *fbi)
if (!pxafb_overlay_supported())
return;
- for (i = 0; i < 2; i++)
- unregister_framebuffer(&fbi->overlay[i].fb);
+ for (i = 0; i < 2; i++) {
+ struct pxafb_layer *ofb = &fbi->overlay[i];
+ if (ofb->registered) {
+ if (ofb->video_mem)
+ free_pages_exact(ofb->video_mem,
+ ofb->video_mem_size);
+ unregister_framebuffer(&ofb->fb);
+ }
+ }
}
#else
static inline void pxafb_overlay_init(struct pxafb_info *fbi) {}
@@ -1368,7 +1401,8 @@ static int pxafb_activate_var(struct fb_var_screeninfo *var,
(lcd_readl(fbi, LCCR3) != fbi->reg_lccr3) ||
(lcd_readl(fbi, LCCR4) != fbi->reg_lccr4) ||
(lcd_readl(fbi, FDADR0) != fbi->fdadr[0]) ||
- (lcd_readl(fbi, FDADR1) != fbi->fdadr[1]))
+ ((fbi->lccr0 & LCCR0_SDS) &&
+ (lcd_readl(fbi, FDADR1) != fbi->fdadr[1])))
pxafb_schedule_work(fbi, C_REENABLE);
return 0;
@@ -1420,7 +1454,8 @@ static void pxafb_enable_controller(struct pxafb_info *fbi)
lcd_writel(fbi, LCCR0, fbi->reg_lccr0 & ~LCCR0_ENB);
lcd_writel(fbi, FDADR0, fbi->fdadr[0]);
- lcd_writel(fbi, FDADR1, fbi->fdadr[1]);
+ if (fbi->lccr0 & LCCR0_SDS)
+ lcd_writel(fbi, FDADR1, fbi->fdadr[1]);
lcd_writel(fbi, LCCR0, fbi->reg_lccr0 | LCCR0_ENB);
}
@@ -1613,7 +1648,8 @@ pxafb_freq_transition(struct notifier_block *nb, unsigned long val, void *data)
switch (val) {
case CPUFREQ_PRECHANGE:
- set_ctrlr_state(fbi, C_DISABLE_CLKCHANGE);
+ if (!fbi->overlay[0].usage && !fbi->overlay[1].usage)
+ set_ctrlr_state(fbi, C_DISABLE_CLKCHANGE);
break;
case CPUFREQ_POSTCHANGE:
@@ -1806,6 +1842,12 @@ static struct pxafb_info * __devinit pxafb_init_fbinfo(struct device *dev)
pxafb_decode_mach_info(fbi, inf);
+#ifdef CONFIG_FB_PXA_OVERLAY
+ /* place overlay(s) on top of base */
+ if (pxafb_overlay_supported())
+ fbi->lccr0 |= LCCR0_OUC;
+#endif
+
init_waitqueue_head(&fbi->ctrlr_wait);
INIT_WORK(&fbi->task, pxafb_task);
mutex_init(&fbi->ctrlr_lock);
diff --git a/drivers/video/pxafb.h b/drivers/video/pxafb.h
index 2353521c5c8c..26ba9fa3f737 100644
--- a/drivers/video/pxafb.h
+++ b/drivers/video/pxafb.h
@@ -92,7 +92,8 @@ struct pxafb_layer_ops {
struct pxafb_layer {
struct fb_info fb;
int id;
- atomic_t usage;
+ int registered;
+ uint32_t usage;
uint32_t control[2];
struct pxafb_layer_ops *ops;