summaryrefslogtreecommitdiff
path: root/Documentation/cdrom/aztcd
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/cdrom/aztcd')
-rw-r--r--Documentation/cdrom/aztcd822
1 files changed, 0 insertions, 822 deletions
diff --git a/Documentation/cdrom/aztcd b/Documentation/cdrom/aztcd
deleted file mode 100644
index 6bf0290ef7ce..000000000000
--- a/Documentation/cdrom/aztcd
+++ /dev/null
@@ -1,822 +0,0 @@
-$Id: README.aztcd,v 2.60 1997/11/29 09:51:25 root Exp root $
- Readme-File Documentation/cdrom/aztcd
- for
- AZTECH CD-ROM CDA268-01A, ORCHID CD-3110,
- OKANO/WEARNES CDD110, CONRAD TXC, CyCDROM CR520, CR540
- CD-ROM Drives
- Version 2.6 and newer
- (for other drives see 6.-8.)
-
-NOTE: THIS DRIVER WILL WORK WITH THE CD-ROM DRIVES LISTED, WHICH HAVE
- A PROPRIETARY INTERFACE (implemented on a sound card or on an
- ISA-AT-bus card).
- IT WILL DEFINITELY NOT WORK WITH CD-ROM DRIVES WITH *IDE*-INTERFACE,
- such as the Aztech CDA269-031SE !!! (The only known exceptions are
- 'faked' IDE drives like the CyCDROM CR520ie which work with aztcd
- under certain conditions, see 7.). IF YOU'RE USING A CD-ROM DRIVE
- WITH IDE-INTERFACE, SOMETIMES ALSO CALLED ATAPI-COMPATIBLE, PLEASE
- USE THE ide-cd.c DRIVER, WRITTEN BY MARK LORD AND SCOTT SNYDER !
- THE STANDARD-KERNEL 1.2.x NOW ALSO SUPPORTS IDE-CDROM-DRIVES, SEE THE
- HARDDISK (!) SECTION OF make config, WHEN COMPILING A NEW KERNEL!!!
-----------------------------------------------------------------------------
-
-Contents of this file:
- 1. NOTE
- 2. INSTALLATION
- 3. CONFIGURING YOUR KERNEL
- 4. RECOMPILING YOUR KERNEL
- 4.1 AZTCD AS A RUN-TIME LOADABLE MODULE
- 4.2 CDROM CONNECTED TO A SOUNDCARD
- 5. KNOWN PROBLEMS, FUTURE DEVELOPMENTS
- 5.1 MULTISESSION SUPPORT
- 5.2 STATUS RECOGNITION
- 5.3 DOSEMU's CDROM SUPPORT
- 6. BUG REPORTS
- 7. OTHER DRIVES
- 8. IF YOU DON'T SUCCEED ... DEBUGGING
- 9. TECHNICAL HISTORY OF THE DRIVER
- 10. ACKNOWLEDGMENTS
- 11. PROGRAMMING ADD ONS: CDPLAY.C
- APPENDIX: Source code of cdplay.c
-----------------------------------------------------------------------------
-
-1. NOTE
-This software has been successfully in alpha and beta test and is part of
-the standard kernel since kernel 1.1.8x since December 1994. It works with
-AZTECH CDA268-01A, ORCHID CDS-3110, ORCHID/WEARNES CDD110 and CONRAD TXC
-(Nr.99 31 23 -series 04) and has proven to be stable with kernel
-versions 1.0.9 and newer. But with any software there still may be bugs in it.
-So if you encounter problems, you are invited to help us improve this software.
-Please send me a detailed bug report (see chapter BUG REPORTS). You are also
-invited in helping us to increase the number of drives, which are supported.
-
-Please read the README-files carefully and always keep a backup copy of your
-old kernel, in order to reboot if something goes wrong!
-
-2. INSTALLATION
-The driver consists of a header file 'aztcd.h', which normally should reside
-in /usr/src/linux/drivers/cdrom and the source code 'aztcd.c', which normally
-resides in the same place. It uses /dev/aztcd (/dev/aztcd0 in some distri-
-butions), which must be a valid block device with major number 29 and reside
-in directory /dev. To mount a CD-ROM, your kernel needs to have the ISO9660-
-filesystem support included.
-
-PLEASE NOTE: aztcd.c has been developed in parallel to the linux kernel,
-which had and is having many major and minor changes which are not backward
-compatible. Quite definitely aztcd.c version 1.80 and newer will NOT work
-in kernels older than 1.3.33. So please always use the most recent version
-of aztcd.c with the appropriate linux-kernel.
-
-3. CONFIGURING YOUR KERNEL
-If your kernel is already configured for using the AZTECH driver you will
-see the following message while Linux boots:
- Aztech CD-ROM Init: DriverVersion=<version number> BaseAddress=<baseaddress>
- Aztech CD-ROM Init: FirmwareVersion=<firmware version id of your I/O-card>>>
- Aztech CD-ROM Init: <drive type> detected
- Aztech CD-ROM Init: End
-If the message looks different and you are sure to have a supported drive,
-it may have a different base address. The Aztech driver does look for the
-CD-ROM drive at the base address specified in aztcd.h at compile time. This
-address can be overwritten by boot parameter aztcd=....You should reboot and
-start Linux with boot parameter aztcd=<base address>, e.g. aztcd=0x320. If
-you do not know the base address, start your PC with DOS and look at the boot
-message of your CD-ROM's DOS driver. If that still does not help, use boot
-parameter aztcd=<base address>,0x79 , this tells aztcd to try a little harder.
-aztcd may be configured to use autoprobing the base address by recompiling
-it (see chapter 4.).
-
-If the message looks correct, as user 'root' you should be able to mount the
-drive by
- mount -t iso9660 -r /dev/aztcd0 /mnt
-and use it as any other filesystem. (If this does not work, check if
-/dev/aztcd0 and /mnt do exist and create them, if necessary by doing
- mknod /dev/aztcd0 b 29 0
- mkdir /mnt
-
-If you still get a different message while Linux boots or when you get the
-message, that the ISO9660-filesystem is not supported by your kernel, when
-you try to mount the CD-ROM drive, you have to recompile your kernel.
-
-If you do *not* have an Aztech/Orchid/Okano/Wearnes/TXC drive and want to
-bypass drive detection during Linux boot up, start with boot parameter aztcd=0.
-
-Most distributions nowadays do contain a boot disk image containing aztcd.
-Please note, that this driver will not work with IDE/ATAPI drives! With these
-you must use ide-cd.c instead.
-
-4. RECOMPILING YOUR KERNEL
-If your kernel is not yet configured for the AZTECH driver and the ISO9660-
-filesystem, you have to recompile your kernel:
-
-- Edit aztcd.h to set the I/O-address to your I/O-Base address (AZT_BASE_ADDR),
- the driver does not use interrupts or DMA, so if you are using an AZTECH
- CD268, an ORCHID CD-3110 or ORCHID/WEARNES CDD110 that's the only item you
- have to set up. If you have a soundcard, read chapter 4.2.
- Users of other drives should read chapter OTHER DRIVES of this file.
- You also can configure that address by kernel boot parameter aztcd=...
-- aztcd may be configured to use autoprobing the base address by setting
- AZT_BASE_ADDR to '-1'. In that case aztcd probes the addresses listed
- under AZT_BASE_AUTO. But please remember, that autoprobing always may
- incorrectly influence other hardware components too!
-- There are some other points, which may be configured, e.g. auto-eject the
- CD when unmounting a drive, tray locking etc., see aztcd.h for details.
-- If you're using a linux kernel version prior to 2.1.0, in aztcd.h
- uncomment the line '#define AZT_KERNEL_PRIOR_2_1'
-- Build a new kernel, configure it for 'Aztech/Orchid/Okano/Wearnes support'
- (if you want aztcd to be part of the kernel). Do not configure it for
- 'Aztech... support', if you want to use aztcd as a run time loadable module.
- But in any case you must have the ISO9660-filesystem included in your
- kernel.
-- Activate the new kernel, normally this is done by running LILO (don't for-
- get to configure it before and to keep a copy of your old kernel in case
- something goes wrong!).
-- Reboot
-- If you've included aztcd in your kernel, you now should see during boot
- some messages like
- Aztech CD-ROM Init: DriverVersion=<version number> BaseAddress=<baseaddress>
- Aztech CD-ROM Init: FirmwareVersion=<firmware version id of your I/O-card>
- Aztech CD-ROM Init: <drive type> detected
- Aztech CD-ROM Init: End
-- If you have not included aztcd in your kernel, but want to load aztcd as a
- run time loadable module see 4.1.
-- If the message looks correct, as user 'root' you should be able to mount
- the drive by
- mount -t iso9660 -r /dev/aztcd0 /mnt
- and use it as any other filesystem. (If this does not work, check if
- /dev/aztcd0 and /mnt do exist and create them, if necessary by doing
- mknod /dev/aztcd0 b 29 0
- mkdir /mnt
-- If this still does not help, see chapters OTHER DRIVES and DEBUGGING.
-
-4.1 AZTCD AS A RUN-TIME LOADABLE MODULE
-If you do not need aztcd permanently, you can also load and remove the driver
-during runtime via insmod and rmmod. To build aztcd as a loadable module you
-must configure your kernel for AZTECH module support (answer 'm' when con-
-figuring the kernel). Anyhow, you may run into problems, if the version of
-your boot kernel is not the same than the source kernel version, from which
-you create the modules. So rebuild your kernel, if necessary.
-
-Now edit the base address of your AZTECH interface card in
-/usr/src/linux/drivers/cdrom/aztcd.h to the appropriate value.
-aztcd may be configured to use autoprobing the base address by setting
-AZT_BASE_ADDR to '-1'. In that case aztcd probes the addresses listed
-under AZT_BASE_AUTO. But please remember, that autoprobing always may
-incorrectly influence other hardware components too!
-There are also some special features which may be configured, e.g.
-auto-eject a CD when unmounting the drive etc; see aztcd.h for details.
-Then change to /usr/src/linux and do a
- make modules
- make modules_install
-After that you can run-time load the driver via
- insmod /lib/modules/X.X.X/misc/aztcd.o
-and remove it via rmmod aztcd.
-If you did not set the correct base address in aztcd.h, you can also supply the
-base address when loading the driver via
- insmod /lib/modules/X.X.X/misc/aztcd.o aztcd=<base address>
-Again specifying aztcd=-1 will cause autoprobing.
-If you do not have the iso9660-filesystem in your boot kernel, you also have
-to load it before you can mount the CDROM:
- insmod /lib/modules/X.X.X/fs/isofs.o
-The mount procedure works as described in 4. above.
-(In all commands 'X.X.X' is the current linux kernel version number)
-
-4.2 CDROM CONNECTED TO A SOUNDCARD
-Most soundcards do have a bus interface to the CDROM-drive. In many cases
-this soundcard needs to be configured, before the CDROM can be used. This
-configuration procedure consists of writing some kind of initialization
-data to the soundcard registers. The AZTECH-CDROM driver in the moment does
-only support one type of soundcard (SoundWave32). Users of other soundcards
-should try to boot DOS first and let their DOS drivers initialize the
-soundcard and CDROM, then warm boot (or use loadlin) their PC to start
-Linux.
-Support for the CDROM-interface of SoundWave32-soundcards is directly
-implemented in the AZTECH driver. Please edit linux/drivers/cdrom/aztdc.h,
-uncomment line '#define AZT_SW32' and set the appropriate value for
-AZT_BASE_ADDR and AZT_SW32_BASE_ADDR. This support was tested with an Orchid
-CDS-3110 connected to a SoundWave32.
-If you want your soundcard to be supported, find out, how it needs to be
-configured and mail me (see 6.) the appropriate information.
-
-5. KNOWN PROBLEMS, FUTURE DEVELOPMENTS
-5.1 MULTISESSION SUPPORT
-Multisession support for CD's still is a myth. I implemented and tested a basic
-support for multisession and XA CDs, but I still have not enough CDs and appli-
-cations to test it rigorously. So if you'd like to help me, please contact me
-(Email address see below). As of version 1.4 and newer you can enable the
-multisession support in aztcd.h by setting AZT_MULTISESSION to 1. Doing so
-will cause the ISO9660-filesystem to deal with multisession CDs, ie. redirect
-requests to the Table of Contents (TOC) information from the last session,
-which contains the info of all previous sessions etc.. If you do set
-AZT_MULTISESSION to 0, you can use multisession CDs anyway. In that case the
-drive's firmware will do automatic redirection. For the ISO9660-filesystem any
-multisession CD will then look like a 'normal' single session CD. But never-
-theless the data of all sessions are viewable and accessible. So with practical-
-ly all real world applications you won't notice the difference. But as future
-applications may make use of advanced multisession features, I've started to
-implement the interface for the ISO9660 multisession interface via ioctl
-CDROMMULTISESSION.
-
-5.2 STATUS RECOGNITION
-The drive status recognition does not work correctly in all cases. Changing
-a disk or having the door open, when a drive is already mounted, is detected
-by the Aztech driver itself, but nevertheless causes multiple read attempts
-by the different layers of the ISO9660-filesystem driver, which finally timeout,
-so you have to wait quite a little... But isn't it bad style to change a disk
-in a mounted drive, anyhow ?!
-
-The driver uses busy wait in most cases for the drive handshake (macros
-STEN_LOW and DTEN_LOW). I tested with a 486/DX2 at 66MHz and a Pentium at
-60MHz and 90MHz. Whenever you use a much faster machine you are likely to get
-timeout messages. In that case edit aztcd.h and increase the timeout value
-AZT_TIMEOUT.
-
-For some 'slow' drive commands I implemented waiting with a timer waitqueue
-(macro STEN_LOW_WAIT). If you get this timeout message, you may also edit
-aztcd.h and increase the timeout value AZT_STATUS_DELAY. The waitqueue has
-shown to be a little critical. If you get kernel panic messages, edit aztcd.c
-and substitute STEN_LOW_WAIT by STEN_LOW. Busy waiting with STEN_LOW is more
-stable, but also causes CPU overhead.
-
-5.3 DOSEMU's CD-ROM SUPPORT
-With release 1.20 aztcd was modified to allow access to CD-ROMS when running
-under dosemu-0.60.0 aztcd-versions before 1.20 are most likely to crash
-Linux, when a CD-ROM is accessed under dosemu. This problem has partly been
-fixed, but still when accessing a directory for the first time the system
-might hang for some 30sec. So be patient, when using dosemu's CD-ROM support
-in combination with aztcd :-) !
-This problem has now (July 1995) been fixed by a modification to dosemu's
-CD-ROM driver. The new version came with dosemu-0.60.2, see dosemu's
-README.CDROM.
-
-6. BUG REPORTS
-Please send detailed bug reports and bug fixes via EMail to
-
- Werner.Zimmermann@fht-esslingen.de
-
-Please include a description of your CD-ROM drive type and interface card,
-the exact firmware message during Linux bootup, the version number of the
-AZTECH-CDROM-driver and the Linux kernel version. Also a description of your
-system's other hardware could be of interest, especially microprocessor type,
-clock frequency, other interface cards such as soundcards, ethernet adapter,
-game cards etc..
-
-I will try to collect the reports and make the necessary modifications from
-time to time. I may also come back to you directly with some bug fixes and
-ask you to do further testing and debugging.
-
-Editors of CD-ROMs are invited to send a 'cooperation' copy of their
-CD-ROMs to the volunteers, who provided the CD-ROM support for Linux. My
-snail mail address for such 'stuff' is
- Prof. Dr. W. Zimmermann
- Fachhochschule fuer Technik Esslingen
- Fachbereich IT
- Flandernstrasse 101
- D-73732 Esslingen
- Germany
-
-
-7. OTHER DRIVES
-The following drives ORCHID CDS3110, OKANO CDD110, WEARNES CDD110 and Conrad
-TXC Nr. 993123-series 04 nearly look the same as AZTECH CDA268-01A, especially
-they seem to use the same command codes. So it was quite simple to make the
-AZTECH driver work with these drives.
-
-Unfortunately I do not have any of these drives available, so I couldn't test
-it myself. In some installations, it seems necessary to initialize the drive
-with the DOS driver before (especially if combined with a sound card) and then
-do a warm boot (CTRL-ALT-RESET) or start Linux from DOS, e.g. with 'loadlin'.
-
-If you do not succeed, read chapter DEBUGGING. Thanks in advance!
-
-Sorry for the inconvenience, but it is difficult to develop for hardware,
-which you don't have available for testing. So if you like, please help us.
-
-If you do have a CyCDROM CR520ie thanks to Hilmar Berger's help your chances
-are good, that it will work with aztcd. The CR520ie is sold as an IDE-drive
-and really is connected to the IDE interface (primary at 0x1F0 or secondary
-at 0x170, configured as slave, not as master). Nevertheless it is not ATAPI
-compatible but still uses Aztech's command codes.
-
-
-8. DEBUGGING : IF YOU DON'T SUCCEED, TRY THE FOLLOWING
--reread the complete README file
--make sure, that your drive is hardware configured for
- transfer mode: polled
- IRQ: not used
- DMA: not used
- Base Address: something like 300, 320 ...
- You can check this, when you start the DOS driver, which came with your
- drive. By appropriately configuring the drive and the DOS driver you can
- check, whether your drive does operate in this mode correctly under DOS. If
- it does not operate under DOS, it won't under Linux.
- If your drive's base address is something like 0x170 or 0x1F0 (and it is
- not a CyCDROM CR520ie or CR 940ie) you most likely are having an IDE/ATAPI-
- compatible drive, which is not supported by aztcd.c, use ide-cd.c instead.
- Make sure the Base Address is configured correctly in aztcd.h, also make
- sure, that /dev/aztcd0 exists with the correct major number (compare it with
- the entry in file /usr/include/linux/major.h for the Aztech drive).
--insert a CD-ROM and close the tray
--cold boot your PC (i.e. via the power on switch or the reset button)
--if you start Linux via DOS, e.g. using loadlin, make sure, that the DOS
- driver for the CD-ROM drive is not loaded (comment out the calling lines
- in DOS' config.sys!)
--look for the aztcd: init message during Linux init and note them exactly
--log in as root and do a mount -t iso9660 /dev/aztcd0 /mnt
--if you don't succeed in the first time, try several times. Try also to open
- and close the tray, then mount again. Please note carefully all commands
- you typed in and the aztcd-messages, which you get.
--if you get an 'Aztech CD-ROM init: aborted' message, read the remarks about
- the version string below.
-
-If this does not help, do the same with the following differences
--start DOS before; make now sure, that the DOS driver for the CD-ROM is
- loaded under DOS (i.e. uncomment it again in config.sys)
--warm boot your PC (i.e. via CTRL-ALT-DEL)
- if you have it, you can also start via loadlin (try both).
- ...
- Again note all commands and the aztcd-messages.
-
-If you see STEN_LOW or STEN_LOW_WAIT error messages, increase the timeout
-values.
-
-If this still does not help,
--look in aztcd.c for the lines #if 0
- #define AZT_TEST1
- ...
- #endif
- and substitute '#if 0' by '#if 1'.
--recompile your kernel and repeat the above two procedures. You will now get
- a bundle of debugging messages from the driver. Again note your commands
- and the appropriate messages. If you have syslogd running, these messages
- may also be found in syslogd's kernel log file. Nevertheless in some
- installations syslogd does not yet run, when init() is called, thus look for
- the aztcd-messages during init, before the login-prompt appears.
- Then look in aztcd.c, to find out, what happened. The normal calling sequence
- is: aztcd_init() during Linux bootup procedure init()
- after doing a 'mount -t iso9660 /dev/aztcd0 /mnt' the normal calling sequence is
- aztcd_open() -> Status 2c after cold reboot with CDROM or audio CD inserted
- -> Status 8 after warm reboot with CDROM inserted
- -> Status 2e after cold reboot with no disk, closed tray
- -> Status 6e after cold reboot, mount with door open
- aztUpdateToc()
- aztGetDiskInfo()
- aztGetQChannelInfo() repeated several times
- aztGetToc()
- aztGetQChannelInfo() repeated several times
- a list of track information
- do_aztcd_request() }
- azt_transfer() } repeated several times
- azt_poll }
- Check, if there is a difference in the calling sequence or the status flags!
-
- There are a lot of other messages, eg. the ACMD-command code (defined in
- aztcd.h), status info from the getAztStatus-command and the state sequence of
- the finite state machine in azt_poll(). The most important are the status
- messages, look how they are defined and try to understand, if they make
- sense in the context where they appear. With a CD-ROM inserted the status
- should always be 8, except in aztcd_open(). Try to open the tray, insert an
- audio disk, insert no disk or reinsert the CD-ROM and check, if the status
- bits change accordingly. The status bits are the most likely point, where
- the drive manufacturers may implement changes.
-
-If you still don't succeed, a good point to start is to look in aztcd.c in
-function aztcd_init, where the drive should be detected during init. Do the
-following:
--reboot the system with boot parameter 'aztcd=<your base address>,0x79'. With
- parameter 0x79 most of the drive version detection is bypassed. After that
- you should see the complete version string including leading and trailing
- blanks during init.
- Now adapt the statement
- if ((result[1]=='A')&&(result[2]=='Z' ...)
- in aztcd_init() to exactly match the first 3 or 4 letters you have seen.
--Another point is the 'smart' card detection feature in aztcd_init(). Normally
- the CD-ROM drive is ready, when aztcd_init is trying to read the version
- string and a time consuming ACMD_SOFT_RESET command can be avoided. This is
- detected by looking, if AFL_OP_OK can be read correctly. If the CD-ROM drive
- hangs in some unknown state, e.g. because of an error before a warm start or
- because you first operated under DOS, even the version string may be correct,
- but the following commands will not. Then change the code in such a way,
- that the ACMD_SOFT_RESET is issued in any case, by substituting the
- if-statement 'if ( ...=AFL_OP_OK)' by 'if (1)'.
-
-If you succeed, please mail me the exact version string of your drive and
-the code modifications, you have made together with a short explanation.
-If you don't succeed, you may mail me the output of the debugging messages.
-But remember, they are only useful, if they are exact and complete and you
-describe in detail your hardware setup and what you did (cold/warm reboot,
-with/without DOS, DOS-driver started/not started, which Linux-commands etc.)
-
-
-9. TECHNICAL HISTORY OF THE DRIVER
-The AZTECH-Driver is a rework of the Mitsumi-Driver. Four major items had to
-be reworked:
-
-a) The Mitsumi drive does issue complete status information acknowledging
-each command, the Aztech drive does only signal that the command was
-processed. So whenever the complete status information is needed, an extra
-ACMD_GET_STATUS command is issued. The handshake procedure for the drive
-can be found in the functions aztSendCmd(), sendAztCmd() and getAztStatus().
-
-b) The Aztech Drive does not have a ACMD_GET_DISK_INFO command, so the
-necessary info about the number of tracks (firstTrack, lastTrack), disk
-length etc. has to be read from the TOC in the lead in track (see function
-aztGetDiskInfo()).
-
-c) Whenever data is read from the drive, the Mitsumi drive is started with a
-command to read an indefinite (0xffffff) number of sectors. When the appropriate
-number of sectors is read, the drive is stopped by a ACDM_STOP command. This
-does not work with the Aztech drive. I did not find a way to stop it. The
-stop and pause commands do only work in AUDIO mode but not in DATA mode.
-Therefore I had to modify the 'finite state machine' in function azt_poll to
-only read a certain number of sectors and then start a new read on demand. As I
-have not completely understood, how the buffer/caching scheme of the Mitsumi
-driver was implemented, I am not sure, if I have covered all cases correctly,
-whenever you get timeout messages, the bug is most likely to be in that
-function azt_poll() around switch(cmd) .... case ACD_S_DATA.
-
-d) I did not get information about changing drive mode. So I doubt, that the
-code around function azt_poll() case AZT_S_MODE does work. In my test I have
-not been able to switch to reading in raw mode. For reading raw mode, Aztech
-uses a different command than for cooked mode, which I only have implemen-
-ted in the ioctl-section but not in the section which is used by the ISO9660.
-
-The driver was developed on an AST PC with Intel 486/DX2, 8MB RAM, 340MB IDE
-hard disk and on an AST PC with Intel Pentium 60MHz, 16MB RAM, 520MB IDE
-running Linux kernel version 1.0.9 from the LST 1.8 Distribution. The kernel
-was compiled with gcc.2.5.8. My CD-ROM drive is an Aztech CDA268-01A. My
-drive says, that it has Firmware Version AZT26801A1.3. It came with an ISA-bus
-interface card and works with polled I/O without DMA and without interrupts.
-The code for all other drives was 'remote' tested and debugged by a number of
-volunteers on the Internet.
-
-Points, where I feel that possible problems might be and all points where I
-did not completely understand the drive's behaviour or trust my own code are
-marked with /*???*/ in the source code. There are also some parts in the
-Mitsumi driver, where I did not completely understand their code.
-
-
-10. ACKNOWLEDGMENTS
-Without the help of P.Bush, Aztech, who delivered technical information
-about the Aztech Drive and without the help of E.Moenkeberg, GWDG, who did a
-great job in analyzing the command structure of various CD-ROM drives, this
-work would not have been possible. E.Moenkeberg was also a great help in
-making the software 'kernel ready' and in answering many of the CDROM-related
-questions in the newsgroups. He really is *the* Linux CD-ROM guru. Thanks
-also to all the guys on the Internet, who collected valuable technical
-information about CDROMs.
-
-Joe Nardone (joe@access.digex.net) was a patient tester even for my first
-trial, which was more than slow, and made suggestions for code improvement.
-Especially the 'finite state machine' azt_poll() was rewritten by Joe to get
-clean C code and avoid the ugly 'gotos', which I copied from mcd.c.
-
-Robby Schirmer (schirmer@fmi.uni-passau.de) tested the audio stuff (ioctls)
-and suggested a lot of patches for them.
-
-Joseph Piskor and Peter Nugent were the first users with the ORCHID CD3110
-and also were very patient with the problems which occurred.
-
-Reinhard Max delivered the information for the CDROM-interface of the
-SoundWave32 soundcards.
-
-Jochen Kunz and Olaf Kaluza delivered the information for supporting Conrad's
-TXC drive.
-
-Hilmar Berger delivered the patches for supporting CyCDROM CR520ie.
-
-Anybody, who is interested in these items should have a look at 'ftp.gwdg.de',
-directory 'pub/linux/cdrom' and at 'ftp.cdrom.com', directory 'pub/cdrom'.
-
-11. PROGRAMMING ADD ONs: cdplay.c
-You can use the ioctl-functions included in aztcd.c in your own programs. As
-an example on how to do this, you will find a tiny CD Player for audio CDs
-named 'cdplay.c'. It allows you to play audio CDs. You can play a specified
-track, pause and resume or skip tracks forward and backwards. If you quit the
-program without stopping the drive, playing is continued. You can also
-(mis)use cdplay to read and hexdump data disks. You can find the code in the
-APPENDIX of this file, which you should cut out with an editor and store in a
-separate file 'cdplay.c'. To compile it and make it executable, do
- gcc -s -Wall -O2 -L/usr/lib cdplay.c -o /usr/local/bin/cdplay # compiles it
- chmod +755 /usr/local/bin/cdplay # makes it executable
- ln -s /dev/aztcd0 /dev/cdrom # creates a link
- (for /usr/lib substitute the top level directory, where your include files
- reside, and for /usr/local/bin the directory, where you want the executable
- binary to reside )
-
-You have to set the correct permissions for cdplay *and* for /dev/mcd0 or
-/dev/aztcd0 in order to use it. Remember, that you should not have /dev/cdrom
-mounted, when you're playing audio CDs.
-
-This program is just a hack for testing the ioctl-functions in aztcd.c. I will
-not maintain it, so if you run into problems, discard it or have a look into
-the source code 'cdplay.c'. The program does only contain a minimum of user
-protection and input error detection. If you use the commands in the wrong
-order or if you try to read a CD at wrong addresses, you may get error messages
-or even hang your machine. If you get STEN_LOW, STEN_LOW_WAIT or segment violation
-error messages when using cdplay, after that, the system might not be stable
-any more, so you'd better reboot. As the ioctl-functions run in kernel mode,
-most normal Linux-multitasking protection features do not work. By using
-uninitialized 'wild' pointers etc., it is easy to write to other users' data
-and program areas, destroy kernel tables etc.. So if you experiment with ioctls
-as always when you are doing systems programming and kernel hacking, you
-should have a backup copy of your system in a safe place (and you also
-should try restoring from a backup copy first)!
-
-A reworked and improved version called 'cdtester.c', which has yet more
-features for testing CDROM-drives can be found in
-Documentation/cdrom/sbpcd, written by E.Moenkeberg.
-
-Werner Zimmermann
-Fachhochschule fuer Technik Esslingen
-(EMail: Werner.Zimmermann@fht-esslingen.de)
-October, 1997
-
----------------------------------------------------------------------------
-APPENDIX: Source code of cdplay.c
-
-/* Tiny Audio CD Player
-
- Copyright 1994, 1995, 1996 Werner Zimmermann (Werner.Zimmermann@fht-esslingen.de)
-
-This program originally was written to test the audio functions of the
-AZTECH.CDROM-driver, but it should work with every CD-ROM drive. Before
-using it, you should set a symlink from /dev/cdrom to your real CDROM
-device.
-
-The GNU General Public License applies to this program.
-
-History: V0.1 W.Zimmermann: First release. Nov. 8, 1994
- V0.2 W.Zimmermann: Enhanced functionality. Nov. 9, 1994
- V0.3 W.Zimmermann: Additional functions. Nov. 28, 1994
- V0.4 W.Zimmermann: fixed some bugs. Dec. 17, 1994
- V0.5 W.Zimmermann: clean 'scanf' commands without compiler warnings
- Jan. 6, 1995
- V0.6 W.Zimmermann: volume control (still experimental). Jan. 24, 1995
- V0.7 W.Zimmermann: read raw modified. July 26, 95
-*/
-
-#include <stdio.h>
-#include <ctype.h>
-#include <sys/ioctl.h>
-#include <sys/types.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <linux/cdrom.h>
-#include <linux/../../drivers/cdrom/aztcd.h>
-
-void help(void)
-{ printf("Available Commands: STOP s EJECT/CLOSE e QUIT q\n");
- printf(" PLAY TRACK t PAUSE p RESUME r\n");
- printf(" NEXT TRACK n REPEAT LAST l HELP h\n");
- printf(" SUB CHANNEL c TRACK INFO i PLAY AT a\n");
- printf(" READ d READ RAW w VOLUME v\n");
-}
-
-int main(void)
-{ int handle;
- unsigned char command=' ', ini=0, first=1, last=1;
- unsigned int cmd, i,j,k, arg1,arg2,arg3;
- struct cdrom_ti ti;
- struct cdrom_tochdr tocHdr;
- struct cdrom_subchnl subchnl;
- struct cdrom_tocentry entry;
- struct cdrom_msf msf;
- union { struct cdrom_msf msf;
- unsigned char buf[CD_FRAMESIZE_RAW];
- } azt;
- struct cdrom_volctrl volctrl;
-
- printf("\nMini-Audio CD-Player V0.72 (C) 1994,1995,1996 W.Zimmermann\n");
- handle=open("/dev/cdrom",O_RDWR);
- ioctl(handle,CDROMRESUME);
-
- if (handle<=0)
- { printf("Drive Error: already playing, no audio disk, door open\n");
- printf(" or no permission (you must be ROOT in order to use this program)\n");
- }
- else
- { help();
- while (1)
- { printf("Type command (h = help): ");
- scanf("%s",&command);
- switch (command)
- { case 'e': cmd=CDROMEJECT;
- ioctl(handle,cmd);
- break;
- case 'p': if (!ini)
- { printf("Command not allowed - play track first\n");
- }
- else
- { cmd=CDROMPAUSE;
- if (ioctl(handle,cmd)) printf("Drive Error\n");
- }
- break;
- case 'r': if (!ini)
- { printf("Command not allowed - play track first\n");
- }
- else
- { cmd=CDROMRESUME;
- if (ioctl(handle,cmd)) printf("Drive Error\n");
- }
- break;
- case 's': cmd=CDROMPAUSE;
- if (ioctl(handle,cmd)) printf("Drive error or already stopped\n");
- cmd=CDROMSTOP;
- if (ioctl(handle,cmd)) printf("Drive error\n");
- break;
- case 't': cmd=CDROMREADTOCHDR;
- if (ioctl(handle,cmd,&tocHdr)) printf("Drive Error\n");
- first=tocHdr.cdth_trk0;
- last= tocHdr.cdth_trk1;
- if ((first==0)||(first>last))
- { printf ("--could not read TOC\n");
- }
- else
- { printf("--first track: %d --last track: %d --enter track number: ",first,last);
- cmd=CDROMPLAYTRKIND;
- scanf("%i",&arg1);
- ti.cdti_trk0=arg1;
- if (ti.cdti_trk0<first) ti.cdti_trk0=first;
- if (ti.cdti_trk0>last) ti.cdti_trk0=last;
- ti.cdti_ind0=0;
- ti.cdti_trk1=last;
- ti.cdti_ind1=0;
- if (ioctl(handle,cmd,&ti)) printf("Drive Error\n");
- ini=1;
- }
- break;
- case 'n': if (!ini++)
- { if (ioctl(handle,CDROMREADTOCHDR,&tocHdr)) printf("Drive Error\n");
- first=tocHdr.cdth_trk0;
- last= tocHdr.cdth_trk1;
- ti.cdti_trk0=first-1;
- }
- if ((first==0)||(first>last))
- { printf ("--could not read TOC\n");
- }
- else
- { cmd=CDROMPLAYTRKIND;
- if (++ti.cdti_trk0 > last) ti.cdti_trk0=last;
- ti.cdti_ind0=0;
- ti.cdti_trk1=last;
- ti.cdti_ind1=0;
- if (ioctl(handle,cmd,&ti)) printf("Drive Error\n");
- ini=1;
- }
- break;
- case 'l': if (!ini++)
- { if (ioctl(handle,CDROMREADTOCHDR,&tocHdr)) printf("Drive Error\n");
- first=tocHdr.cdth_trk0;
- last= tocHdr.cdth_trk1;
- ti.cdti_trk0=first+1;
- }
- if ((first==0)||(first>last))
- { printf ("--could not read TOC\n");
- }
- else
- { cmd=CDROMPLAYTRKIND;
- if (--ti.cdti_trk0 < first) ti.cdti_trk0=first;
- ti.cdti_ind0=0;
- ti.cdti_trk1=last;
- ti.cdti_ind1=0;
- if (ioctl(handle,cmd,&ti)) printf("Drive Error\n");
- ini=1;
- }
- break;
- case 'c': subchnl.cdsc_format=CDROM_MSF;
- if (ioctl(handle,CDROMSUBCHNL,&subchnl))
- printf("Drive Error\n");
- else
- { printf("AudioStatus:%s Track:%d Mode:%d MSF=%d:%d:%d\n", \
- subchnl.cdsc_audiostatus==CDROM_AUDIO_PLAY ? "PLAYING":"NOT PLAYING",\
- subchnl.cdsc_trk,subchnl.cdsc_adr, \
- subchnl.cdsc_absaddr.msf.minute, subchnl.cdsc_absaddr.msf.second, \
- subchnl.cdsc_absaddr.msf.frame);
- }
- break;
- case 'i': if (!ini)
- { printf("Command not allowed - play track first\n");
- }
- else
- { cmd=CDROMREADTOCENTRY;
- printf("Track No.: ");
- scanf("%d",&arg1);
- entry.cdte_track=arg1;
- if (entry.cdte_track<first) entry.cdte_track=first;
- if (entry.cdte_track>last) entry.cdte_track=last;
- entry.cdte_format=CDROM_MSF;
- if (ioctl(handle,cmd,&entry))
- { printf("Drive error or invalid track no.\n");
- }
- else
- { printf("Mode %d Track, starts at %d:%d:%d\n", \
- entry.cdte_adr,entry.cdte_addr.msf.minute, \
- entry.cdte_addr.msf.second,entry.cdte_addr.msf.frame);
- }
- }
- break;
- case 'a': cmd=CDROMPLAYMSF;
- printf("Address (min:sec:frame) ");
- scanf("%d:%d:%d",&arg1,&arg2,&arg3);
- msf.cdmsf_min0 =arg1;
- msf.cdmsf_sec0 =arg2;
- msf.cdmsf_frame0=arg3;
- if (msf.cdmsf_sec0 > 59) msf.cdmsf_sec0 =59;
- if (msf.cdmsf_frame0> 74) msf.cdmsf_frame0=74;
- msf.cdmsf_min1=60;
- msf.cdmsf_sec1=00;
- msf.cdmsf_frame1=00;
- if (ioctl(handle,cmd,&msf))
- { printf("Drive error or invalid address\n");
- }
- break;
-#ifdef AZT_PRIVATE_IOCTLS /*not supported by every CDROM driver*/
- case 'd': cmd=CDROMREADCOOKED;
- printf("Address (min:sec:frame) ");
- scanf("%d:%d:%d",&arg1,&arg2,&arg3);
- azt.msf.cdmsf_min0 =arg1;
- azt.msf.cdmsf_sec0 =arg2;
- azt.msf.cdmsf_frame0=arg3;
- if (azt.msf.cdmsf_sec0 > 59) azt.msf.cdmsf_sec0 =59;
- if (azt.msf.cdmsf_frame0> 74) azt.msf.cdmsf_frame0=74;
- if (ioctl(handle,cmd,&azt.msf))
- { printf("Drive error, invalid address or unsupported command\n");
- }
- k=0;
- getchar();
- for (i=0;i<128;i++)
- { printf("%4d:",i*16);
- for (j=0;j<16;j++)
- { printf("%2x ",azt.buf[i*16+j]);
- }
- for (j=0;j<16;j++)
- { if (isalnum(azt.buf[i*16+j]))
- printf("%c",azt.buf[i*16+j]);
- else
- printf(".");
- }
- printf("\n");
- k++;
- if (k>=20)
- { printf("press ENTER to continue\n");
- getchar();
- k=0;
- }
- }
- break;
- case 'w': cmd=CDROMREADRAW;
- printf("Address (min:sec:frame) ");
- scanf("%d:%d:%d",&arg1,&arg2,&arg3);
- azt.msf.cdmsf_min0 =arg1;
- azt.msf.cdmsf_sec0 =arg2;
- azt.msf.cdmsf_frame0=arg3;
- if (azt.msf.cdmsf_sec0 > 59) azt.msf.cdmsf_sec0 =59;
- if (azt.msf.cdmsf_frame0> 74) azt.msf.cdmsf_frame0=74;
- if (ioctl(handle,cmd,&azt))
- { printf("Drive error, invalid address or unsupported command\n");
- }
- k=0;
- for (i=0;i<147;i++)
- { printf("%4d:",i*16);
- for (j=0;j<16;j++)
- { printf("%2x ",azt.buf[i*16+j]);
- }
- for (j=0;j<16;j++)
- { if (isalnum(azt.buf[i*16+j]))
- printf("%c",azt.buf[i*16+j]);
- else
- printf(".");
- }
- printf("\n");
- k++;
- if (k>=20)
- { getchar();
- k=0;
- }
- }
- break;
-#endif
- case 'v': cmd=CDROMVOLCTRL;
- printf("--Channel 0 Left (0-255): ");
- scanf("%d",&arg1);
- printf("--Channel 1 Right (0-255): ");
- scanf("%d",&arg2);
- volctrl.channel0=arg1;
- volctrl.channel1=arg2;
- volctrl.channel2=0;
- volctrl.channel3=0;
- if (ioctl(handle,cmd,&volctrl))
- { printf("Drive error or unsupported command\n");
- }
- break;
- case 'q': if (close(handle)) printf("Drive Error: CLOSE\n");
- exit(0);
- case 'h': help();
- break;
- default: printf("unknown command\n");
- break;
- }
- }
- }
- return 0;
-}