summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/gpio/gpio-tz1090.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/gpio/gpio-tz1090.txt')
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio-tz1090.txt88
1 files changed, 88 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/gpio/gpio-tz1090.txt b/Documentation/devicetree/bindings/gpio/gpio-tz1090.txt
new file mode 100644
index 000000000000..174cdf309170
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-tz1090.txt
@@ -0,0 +1,88 @@
+ImgTec TZ1090 GPIO Controller
+
+Required properties:
+- compatible: Compatible property value should be "img,tz1090-gpio".
+
+- reg: Physical base address of the controller and length of memory mapped
+ region.
+
+- #address-cells: Should be 1 (for bank subnodes)
+
+- #size-cells: Should be 0 (for bank subnodes)
+
+- Each bank of GPIOs should have a subnode to represent it.
+
+ Bank subnode required properties:
+ - reg: Index of bank in the range 0 to 2.
+
+ - gpio-controller: Specifies that the node is a gpio controller.
+
+ - #gpio-cells: Should be 2. The syntax of the gpio specifier used by client
+ nodes should have the following values.
+ <[phandle of the gpio controller node]
+ [gpio number within the gpio bank]
+ [gpio flags]>
+
+ Values for gpio specifier:
+ - GPIO number: a value in the range 0 to 29.
+ - GPIO flags: bit field of flags, as defined in <dt-bindings/gpio/gpio.h>.
+ Only the following flags are supported:
+ GPIO_ACTIVE_HIGH
+ GPIO_ACTIVE_LOW
+
+ Bank subnode optional properties:
+ - gpio-ranges: Mapping to pin controller pins (as described in
+ Documentation/devicetree/bindings/gpio/gpio.txt)
+
+ - interrupts: Interrupt for the entire bank
+
+ - interrupt-controller: Specifies that the node is an interrupt controller
+
+ - #interrupt-cells: Should be 2. The syntax of the interrupt specifier used by
+ client nodes should have the following values.
+ <[phandle of the interurupt controller]
+ [gpio number within the gpio bank]
+ [irq flags]>
+
+ Values for irq specifier:
+ - GPIO number: a value in the range 0 to 29
+ - IRQ flags: value to describe edge and level triggering, as defined in
+ <dt-bindings/interrupt-controller/irq.h>. Only the following flags are
+ supported:
+ IRQ_TYPE_EDGE_RISING
+ IRQ_TYPE_EDGE_FALLING
+ IRQ_TYPE_EDGE_BOTH
+ IRQ_TYPE_LEVEL_HIGH
+ IRQ_TYPE_LEVEL_LOW
+
+
+
+Example:
+
+ gpios: gpio-controller@02005800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "img,tz1090-gpio";
+ reg = <0x02005800 0x90>;
+
+ /* bank 0 with an interrupt */
+ gpios0: bank@0 {
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ reg = <0>;
+ interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 30>;
+ interrupt-controller;
+ };
+
+ /* bank 2 without interrupt */
+ gpios2: bank@2 {
+ #gpio-cells = <2>;
+ reg = <2>;
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 60 30>;
+ };
+ };
+
+