diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net/fsl-fec.txt')
-rw-r--r-- | Documentation/devicetree/bindings/net/fsl-fec.txt | 13 |
1 files changed, 13 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt index 6f55bdd52f8a..a357df3fd9f6 100644 --- a/Documentation/devicetree/bindings/net/fsl-fec.txt +++ b/Documentation/devicetree/bindings/net/fsl-fec.txt @@ -5,6 +5,13 @@ Required properties: - reg : Address and length of the register set for the device - interrupts : Should contain fec interrupt - phy-mode : See ethernet.txt file in the same directory +- clock-name: Should be the names of the clocks + - "ipg" for MAC ipg_clk_s, ipg_clk_mac_s that are for register accessing + - "ahb" for MAC ipg_clk, ipg_clk_mac that are bus clock + - "ptp" for IEEE1588 timer clock + - "enet_clk_ref" for MAC transmit/receiver reference clock + - "enet_out" output clock for external device +- clocks: Phandles to input clocks. Optional properties: - phy-reset-gpios : Should specify the gpio for phy reset @@ -34,6 +41,12 @@ Optional properties: - fsl,err006687-workaround-present: If present indicates that the system has the hardware workaround for ERR006687 applied and does not need a software workaround. +- fsl,wakeup_irq : The property define the wakeup irq index in enet irq source. +- stop-mode : If present, indicates soc need to set gpr bit to request stop + mode. +- fsl,ar8031-phy-fixup : If present, indicates board need to do phy fixup setting. +- mii-exclusive: If present, each MAC has their exclusive MDIO bus in current board + design, otherwise mutiple MACs share one MDIO bus to reduce Pins utilize. Optional subnodes: - mdio : specifies the mdio bus in the FEC, used as a container for phy nodes |