summaryrefslogtreecommitdiff
path: root/Documentation/filesystems/Exporting
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/filesystems/Exporting')
-rw-r--r--Documentation/filesystems/Exporting176
1 files changed, 176 insertions, 0 deletions
diff --git a/Documentation/filesystems/Exporting b/Documentation/filesystems/Exporting
new file mode 100644
index 000000000000..31047e0fe14b
--- /dev/null
+++ b/Documentation/filesystems/Exporting
@@ -0,0 +1,176 @@
+
+Making Filesystems Exportable
+=============================
+
+Most filesystem operations require a dentry (or two) as a starting
+point. Local applications have a reference-counted hold on suitable
+dentrys via open file descriptors or cwd/root. However remote
+applications that access a filesystem via a remote filesystem protocol
+such as NFS may not be able to hold such a reference, and so need a
+different way to refer to a particular dentry. As the alternative
+form of reference needs to be stable across renames, truncates, and
+server-reboot (among other things, though these tend to be the most
+problematic), there is no simple answer like 'filename'.
+
+The mechanism discussed here allows each filesystem implementation to
+specify how to generate an opaque (out side of the filesystem) byte
+string for any dentry, and how to find an appropriate dentry for any
+given opaque byte string.
+This byte string will be called a "filehandle fragment" as it
+corresponds to part of an NFS filehandle.
+
+A filesystem which supports the mapping between filehandle fragments
+and dentrys will be termed "exportable".
+
+
+
+Dcache Issues
+-------------
+
+The dcache normally contains a proper prefix of any given filesystem
+tree. This means that if any filesystem object is in the dcache, then
+all of the ancestors of that filesystem object are also in the dcache.
+As normal access is by filename this prefix is created naturally and
+maintained easily (by each object maintaining a reference count on
+its parent).
+
+However when objects are included into the dcache by interpreting a
+filehandle fragment, there is no automatic creation of a path prefix
+for the object. This leads to two related but distinct features of
+the dcache that are not needed for normal filesystem access.
+
+1/ The dcache must sometimes contain objects that are not part of the
+ proper prefix. i.e that are not connected to the root.
+2/ The dcache must be prepared for a newly found (via ->lookup) directory
+ to already have a (non-connected) dentry, and must be able to move
+ that dentry into place (based on the parent and name in the
+ ->lookup). This is particularly needed for directories as
+ it is a dcache invariant that directories only have one dentry.
+
+To implement these features, the dcache has:
+
+a/ A dentry flag DCACHE_DISCONNECTED which is set on
+ any dentry that might not be part of the proper prefix.
+ This is set when anonymous dentries are created, and cleared when a
+ dentry is noticed to be a child of a dentry which is in the proper
+ prefix.
+
+b/ A per-superblock list "s_anon" of dentries which are the roots of
+ subtrees that are not in the proper prefix. These dentries, as
+ well as the proper prefix, need to be released at unmount time. As
+ these dentries will not be hashed, they are linked together on the
+ d_hash list_head.
+
+c/ Helper routines to allocate anonymous dentries, and to help attach
+ loose directory dentries at lookup time. They are:
+ d_alloc_anon(inode) will return a dentry for the given inode.
+ If the inode already has a dentry, one of those is returned.
+ If it doesn't, a new anonymous (IS_ROOT and
+ DCACHE_DISCONNECTED) dentry is allocated and attached.
+ In the case of a directory, care is taken that only one dentry
+ can ever be attached.
+ d_splice_alias(inode, dentry) will make sure that there is a
+ dentry with the same name and parent as the given dentry, and
+ which refers to the given inode.
+ If the inode is a directory and already has a dentry, then that
+ dentry is d_moved over the given dentry.
+ If the passed dentry gets attached, care is taken that this is
+ mutually exclusive to a d_alloc_anon operation.
+ If the passed dentry is used, NULL is returned, else the used
+ dentry is returned. This corresponds to the calling pattern of
+ ->lookup.
+
+
+Filesystem Issues
+-----------------
+
+For a filesystem to be exportable it must:
+
+ 1/ provide the filehandle fragment routines described below.
+ 2/ make sure that d_splice_alias is used rather than d_add
+ when ->lookup finds an inode for a given parent and name.
+ Typically the ->lookup routine will end:
+ if (inode)
+ return d_splice(inode, dentry);
+ d_add(dentry, inode);
+ return NULL;
+ }
+
+
+
+ A file system implementation declares that instances of the filesystem
+are exportable by setting the s_export_op field in the struct
+super_block. This field must point to a "struct export_operations"
+struct which could potentially be full of NULLs, though normally at
+least get_parent will be set.
+
+ The primary operations are decode_fh and encode_fh.
+decode_fh takes a filehandle fragment and tries to find or create a
+dentry for the object referred to by the filehandle.
+encode_fh takes a dentry and creates a filehandle fragment which can
+later be used to find/create a dentry for the same object.
+
+decode_fh will probably make use of "find_exported_dentry".
+This function lives in the "exportfs" module which a filesystem does
+not need unless it is being exported. So rather that calling
+find_exported_dentry directly, each filesystem should call it through
+the find_exported_dentry pointer in it's export_operations table.
+This field is set correctly by the exporting agent (e.g. nfsd) when a
+filesystem is exported, and before any export operations are called.
+
+find_exported_dentry needs three support functions from the
+filesystem:
+ get_name. When given a parent dentry and a child dentry, this
+ should find a name in the directory identified by the parent
+ dentry, which leads to the object identified by the child dentry.
+ If no get_name function is supplied, a default implementation is
+ provided which uses vfs_readdir to find potential names, and
+ matches inode numbers to find the correct match.
+
+ get_parent. When given a dentry for a directory, this should return
+ a dentry for the parent. Quite possibly the parent dentry will
+ have been allocated by d_alloc_anon.
+ The default get_parent function just returns an error so any
+ filehandle lookup that requires finding a parent will fail.
+ ->lookup("..") is *not* used as a default as it can leave ".."
+ entries in the dcache which are too messy to work with.
+
+ get_dentry. When given an opaque datum, this should find the
+ implied object and create a dentry for it (possibly with
+ d_alloc_anon).
+ The opaque datum is whatever is passed down by the decode_fh
+ function, and is often simply a fragment of the filehandle
+ fragment.
+ decode_fh passes two datums through find_exported_dentry. One that
+ should be used to identify the target object, and one that can be
+ used to identify the object's parent, should that be necessary.
+ The default get_dentry function assumes that the datum contains an
+ inode number and a generation number, and it attempts to get the
+ inode using "iget" and check it's validity by matching the
+ generation number. A filesystem should only depend on the default
+ if iget can safely be used this way.
+
+If decode_fh and/or encode_fh are left as NULL, then default
+implementations are used. These defaults are suitable for ext2 and
+extremely similar filesystems (like ext3).
+
+The default encode_fh creates a filehandle fragment from the inode
+number and generation number of the target together with the inode
+number and generation number of the parent (if the parent is
+required).
+
+The default decode_fh extract the target and parent datums from the
+filehandle assuming the format used by the default encode_fh and
+passed them to find_exported_dentry.
+
+
+A filehandle fragment consists of an array of 1 or more 4byte words,
+together with a one byte "type".
+The decode_fh routine should not depend on the stated size that is
+passed to it. This size may be larger than the original filehandle
+generated by encode_fh, in which case it will have been padded with
+nuls. Rather, the encode_fh routine should choose a "type" which
+indicates the decode_fh how much of the filehandle is valid, and how
+it should be interpreted.
+
+