summaryrefslogtreecommitdiff
path: root/Documentation/filesystems
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/filesystems')
-rw-r--r--Documentation/filesystems/Locking2
-rw-r--r--Documentation/filesystems/ext2.txt2
-rw-r--r--Documentation/filesystems/isofs.txt9
-rw-r--r--Documentation/filesystems/proc.txt268
4 files changed, 225 insertions, 56 deletions
diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking
index 3120f8dd2c31..229d7b7c50a3 100644
--- a/Documentation/filesystems/Locking
+++ b/Documentation/filesystems/Locking
@@ -187,7 +187,7 @@ readpages: no
write_begin: no locks the page yes
write_end: no yes, unlocks yes
perform_write: no n/a yes
-bmap: yes
+bmap: no
invalidatepage: no yes
releasepage: no yes
direct_IO: no
diff --git a/Documentation/filesystems/ext2.txt b/Documentation/filesystems/ext2.txt
index e055acb6b2d4..67639f905f10 100644
--- a/Documentation/filesystems/ext2.txt
+++ b/Documentation/filesystems/ext2.txt
@@ -322,7 +322,7 @@ an upper limit on the block size imposed by the page size of the kernel,
so 8kB blocks are only allowed on Alpha systems (and other architectures
which support larger pages).
-There is an upper limit of 32768 subdirectories in a single directory.
+There is an upper limit of 32000 subdirectories in a single directory.
There is a "soft" upper limit of about 10-15k files in a single directory
with the current linear linked-list directory implementation. This limit
diff --git a/Documentation/filesystems/isofs.txt b/Documentation/filesystems/isofs.txt
index 6973b980ca2a..3c367c3b3608 100644
--- a/Documentation/filesystems/isofs.txt
+++ b/Documentation/filesystems/isofs.txt
@@ -23,8 +23,13 @@ Mount options unique to the isofs filesystem.
map=off Do not map non-Rock Ridge filenames to lower case
map=normal Map non-Rock Ridge filenames to lower case
map=acorn As map=normal but also apply Acorn extensions if present
- mode=xxx Sets the permissions on files to xxx
- dmode=xxx Sets the permissions on directories to xxx
+ mode=xxx Sets the permissions on files to xxx unless Rock Ridge
+ extensions set the permissions otherwise
+ dmode=xxx Sets the permissions on directories to xxx unless Rock Ridge
+ extensions set the permissions otherwise
+ overriderockperm Set permissions on files and directories according to
+ 'mode' and 'dmode' even though Rock Ridge extensions are
+ present.
nojoliet Ignore Joliet extensions if they are present.
norock Ignore Rock Ridge extensions if they are present.
hide Completely strip hidden files from the file system.
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index ebff3c10a07f..fad18f9456e4 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -5,11 +5,12 @@
Bodo Bauer <bb@ricochet.net>
2.4.x update Jorge Nerin <comandante@zaralinux.com> November 14 2000
-move /proc/sys Shen Feng <shen@cn.fujitsu.com> April 1 2009
+move /proc/sys Shen Feng <shen@cn.fujitsu.com> April 1 2009
------------------------------------------------------------------------------
Version 1.3 Kernel version 2.2.12
Kernel version 2.4.0-test11-pre4
------------------------------------------------------------------------------
+fixes/update part 1.1 Stefani Seibold <stefani@seibold.net> June 9 2009
Table of Contents
-----------------
@@ -116,7 +117,7 @@ The link self points to the process reading the file system. Each process
subdirectory has the entries listed in Table 1-1.
-Table 1-1: Process specific entries in /proc
+Table 1-1: Process specific entries in /proc
..............................................................................
File Content
clear_refs Clears page referenced bits shown in smaps output
@@ -134,46 +135,103 @@ Table 1-1: Process specific entries in /proc
status Process status in human readable form
wchan If CONFIG_KALLSYMS is set, a pre-decoded wchan
stack Report full stack trace, enable via CONFIG_STACKTRACE
- smaps Extension based on maps, the rss size for each mapped file
+ smaps a extension based on maps, showing the memory consumption of
+ each mapping
..............................................................................
For example, to get the status information of a process, all you have to do is
read the file /proc/PID/status:
- >cat /proc/self/status
- Name: cat
- State: R (running)
- Pid: 5452
- PPid: 743
+ >cat /proc/self/status
+ Name: cat
+ State: R (running)
+ Tgid: 5452
+ Pid: 5452
+ PPid: 743
TracerPid: 0 (2.4)
- Uid: 501 501 501 501
- Gid: 100 100 100 100
- Groups: 100 14 16
- VmSize: 1112 kB
- VmLck: 0 kB
- VmRSS: 348 kB
- VmData: 24 kB
- VmStk: 12 kB
- VmExe: 8 kB
- VmLib: 1044 kB
- SigPnd: 0000000000000000
- SigBlk: 0000000000000000
- SigIgn: 0000000000000000
- SigCgt: 0000000000000000
- CapInh: 00000000fffffeff
- CapPrm: 0000000000000000
- CapEff: 0000000000000000
-
+ Uid: 501 501 501 501
+ Gid: 100 100 100 100
+ FDSize: 256
+ Groups: 100 14 16
+ VmPeak: 5004 kB
+ VmSize: 5004 kB
+ VmLck: 0 kB
+ VmHWM: 476 kB
+ VmRSS: 476 kB
+ VmData: 156 kB
+ VmStk: 88 kB
+ VmExe: 68 kB
+ VmLib: 1412 kB
+ VmPTE: 20 kb
+ Threads: 1
+ SigQ: 0/28578
+ SigPnd: 0000000000000000
+ ShdPnd: 0000000000000000
+ SigBlk: 0000000000000000
+ SigIgn: 0000000000000000
+ SigCgt: 0000000000000000
+ CapInh: 00000000fffffeff
+ CapPrm: 0000000000000000
+ CapEff: 0000000000000000
+ CapBnd: ffffffffffffffff
+ voluntary_ctxt_switches: 0
+ nonvoluntary_ctxt_switches: 1
This shows you nearly the same information you would get if you viewed it with
the ps command. In fact, ps uses the proc file system to obtain its
-information. The statm file contains more detailed information about the
-process memory usage. Its seven fields are explained in Table 1-2. The stat
-file contains details information about the process itself. Its fields are
-explained in Table 1-3.
+information. But you get a more detailed view of the process by reading the
+file /proc/PID/status. It fields are described in table 1-2.
+
+The statm file contains more detailed information about the process
+memory usage. Its seven fields are explained in Table 1-3. The stat file
+contains details information about the process itself. Its fields are
+explained in Table 1-4.
+Table 1-2: Contents of the statm files (as of 2.6.30-rc7)
+..............................................................................
+ Field Content
+ Name filename of the executable
+ State state (R is running, S is sleeping, D is sleeping
+ in an uninterruptible wait, Z is zombie,
+ T is traced or stopped)
+ Tgid thread group ID
+ Pid process id
+ PPid process id of the parent process
+ TracerPid PID of process tracing this process (0 if not)
+ Uid Real, effective, saved set, and file system UIDs
+ Gid Real, effective, saved set, and file system GIDs
+ FDSize number of file descriptor slots currently allocated
+ Groups supplementary group list
+ VmPeak peak virtual memory size
+ VmSize total program size
+ VmLck locked memory size
+ VmHWM peak resident set size ("high water mark")
+ VmRSS size of memory portions
+ VmData size of data, stack, and text segments
+ VmStk size of data, stack, and text segments
+ VmExe size of text segment
+ VmLib size of shared library code
+ VmPTE size of page table entries
+ Threads number of threads
+ SigQ number of signals queued/max. number for queue
+ SigPnd bitmap of pending signals for the thread
+ ShdPnd bitmap of shared pending signals for the process
+ SigBlk bitmap of blocked signals
+ SigIgn bitmap of ignored signals
+ SigCgt bitmap of catched signals
+ CapInh bitmap of inheritable capabilities
+ CapPrm bitmap of permitted capabilities
+ CapEff bitmap of effective capabilities
+ CapBnd bitmap of capabilities bounding set
+ Cpus_allowed mask of CPUs on which this process may run
+ Cpus_allowed_list Same as previous, but in "list format"
+ Mems_allowed mask of memory nodes allowed to this process
+ Mems_allowed_list Same as previous, but in "list format"
+ voluntary_ctxt_switches number of voluntary context switches
+ nonvoluntary_ctxt_switches number of non voluntary context switches
+..............................................................................
-Table 1-2: Contents of the statm files (as of 2.6.8-rc3)
+Table 1-3: Contents of the statm files (as of 2.6.8-rc3)
..............................................................................
Field Content
size total program size (pages) (same as VmSize in status)
@@ -188,7 +246,7 @@ Table 1-2: Contents of the statm files (as of 2.6.8-rc3)
..............................................................................
-Table 1-3: Contents of the stat files (as of 2.6.22-rc3)
+Table 1-4: Contents of the stat files (as of 2.6.30-rc7)
..............................................................................
Field Content
pid process id
@@ -222,10 +280,10 @@ Table 1-3: Contents of the stat files (as of 2.6.22-rc3)
start_stack address of the start of the stack
esp current value of ESP
eip current value of EIP
- pending bitmap of pending signals (obsolete)
- blocked bitmap of blocked signals (obsolete)
- sigign bitmap of ignored signals (obsolete)
- sigcatch bitmap of catched signals (obsolete)
+ pending bitmap of pending signals
+ blocked bitmap of blocked signals
+ sigign bitmap of ignored signals
+ sigcatch bitmap of catched signals
wchan address where process went to sleep
0 (place holder)
0 (place holder)
@@ -234,19 +292,99 @@ Table 1-3: Contents of the stat files (as of 2.6.22-rc3)
rt_priority realtime priority
policy scheduling policy (man sched_setscheduler)
blkio_ticks time spent waiting for block IO
+ gtime guest time of the task in jiffies
+ cgtime guest time of the task children in jiffies
..............................................................................
+The /proc/PID/map file containing the currently mapped memory regions and
+their access permissions.
+
+The format is:
+
+address perms offset dev inode pathname
+
+08048000-08049000 r-xp 00000000 03:00 8312 /opt/test
+08049000-0804a000 rw-p 00001000 03:00 8312 /opt/test
+0804a000-0806b000 rw-p 00000000 00:00 0 [heap]
+a7cb1000-a7cb2000 ---p 00000000 00:00 0
+a7cb2000-a7eb2000 rw-p 00000000 00:00 0
+a7eb2000-a7eb3000 ---p 00000000 00:00 0
+a7eb3000-a7ed5000 rw-p 00000000 00:00 0
+a7ed5000-a8008000 r-xp 00000000 03:00 4222 /lib/libc.so.6
+a8008000-a800a000 r--p 00133000 03:00 4222 /lib/libc.so.6
+a800a000-a800b000 rw-p 00135000 03:00 4222 /lib/libc.so.6
+a800b000-a800e000 rw-p 00000000 00:00 0
+a800e000-a8022000 r-xp 00000000 03:00 14462 /lib/libpthread.so.0
+a8022000-a8023000 r--p 00013000 03:00 14462 /lib/libpthread.so.0
+a8023000-a8024000 rw-p 00014000 03:00 14462 /lib/libpthread.so.0
+a8024000-a8027000 rw-p 00000000 00:00 0
+a8027000-a8043000 r-xp 00000000 03:00 8317 /lib/ld-linux.so.2
+a8043000-a8044000 r--p 0001b000 03:00 8317 /lib/ld-linux.so.2
+a8044000-a8045000 rw-p 0001c000 03:00 8317 /lib/ld-linux.so.2
+aff35000-aff4a000 rw-p 00000000 00:00 0 [stack]
+ffffe000-fffff000 r-xp 00000000 00:00 0 [vdso]
+
+where "address" is the address space in the process that it occupies, "perms"
+is a set of permissions:
+
+ r = read
+ w = write
+ x = execute
+ s = shared
+ p = private (copy on write)
+
+"offset" is the offset into the mapping, "dev" is the device (major:minor), and
+"inode" is the inode on that device. 0 indicates that no inode is associated
+with the memory region, as the case would be with BSS (uninitialized data).
+The "pathname" shows the name associated file for this mapping. If the mapping
+is not associated with a file:
+
+ [heap] = the heap of the program
+ [stack] = the stack of the main process
+ [vdso] = the "virtual dynamic shared object",
+ the kernel system call handler
+
+ or if empty, the mapping is anonymous.
+
+
+The /proc/PID/smaps is an extension based on maps, showing the memory
+consumption for each of the process's mappings. For each of mappings there
+is a series of lines such as the following:
+
+08048000-080bc000 r-xp 00000000 03:02 13130 /bin/bash
+Size: 1084 kB
+Rss: 892 kB
+Pss: 374 kB
+Shared_Clean: 892 kB
+Shared_Dirty: 0 kB
+Private_Clean: 0 kB
+Private_Dirty: 0 kB
+Referenced: 892 kB
+Swap: 0 kB
+KernelPageSize: 4 kB
+MMUPageSize: 4 kB
+
+The first of these lines shows the same information as is displayed for the
+mapping in /proc/PID/maps. The remaining lines show the size of the mapping,
+the amount of the mapping that is currently resident in RAM, the "proportional
+set size” (divide each shared page by the number of processes sharing it), the
+number of clean and dirty shared pages in the mapping, and the number of clean
+and dirty private pages in the mapping. The "Referenced" indicates the amount
+of memory currently marked as referenced or accessed.
+
+This file is only present if the CONFIG_MMU kernel configuration option is
+enabled.
1.2 Kernel data
---------------
Similar to the process entries, the kernel data files give information about
the running kernel. The files used to obtain this information are contained in
-/proc and are listed in Table 1-4. Not all of these will be present in your
+/proc and are listed in Table 1-5. Not all of these will be present in your
system. It depends on the kernel configuration and the loaded modules, which
files are there, and which are missing.
-Table 1-4: Kernel info in /proc
+Table 1-5: Kernel info in /proc
..............................................................................
File Content
apm Advanced power management info
@@ -283,6 +421,7 @@ Table 1-4: Kernel info in /proc
rtc Real time clock
scsi SCSI info (see text)
slabinfo Slab pool info
+ softirqs softirq usage
stat Overall statistics
swaps Swap space utilization
sys See chapter 2
@@ -597,6 +736,25 @@ on the kind of area :
0xffffffffa0017000-0xffffffffa0022000 45056 sys_init_module+0xc27/0x1d00 ...
pages=10 vmalloc N0=10
+..............................................................................
+
+softirqs:
+
+Provides counts of softirq handlers serviced since boot time, for each cpu.
+
+> cat /proc/softirqs
+ CPU0 CPU1 CPU2 CPU3
+ HI: 0 0 0 0
+ TIMER: 27166 27120 27097 27034
+ NET_TX: 0 0 0 17
+ NET_RX: 42 0 0 39
+ BLOCK: 0 0 107 1121
+ TASKLET: 0 0 0 290
+ SCHED: 27035 26983 26971 26746
+ HRTIMER: 0 0 0 0
+ RCU: 1678 1769 2178 2250
+
+
1.3 IDE devices in /proc/ide
----------------------------
@@ -614,10 +772,10 @@ IDE devices:
More detailed information can be found in the controller specific
subdirectories. These are named ide0, ide1 and so on. Each of these
-directories contains the files shown in table 1-5.
+directories contains the files shown in table 1-6.
-Table 1-5: IDE controller info in /proc/ide/ide?
+Table 1-6: IDE controller info in /proc/ide/ide?
..............................................................................
File Content
channel IDE channel (0 or 1)
@@ -627,11 +785,11 @@ Table 1-5: IDE controller info in /proc/ide/ide?
..............................................................................
Each device connected to a controller has a separate subdirectory in the
-controllers directory. The files listed in table 1-6 are contained in these
+controllers directory. The files listed in table 1-7 are contained in these
directories.
-Table 1-6: IDE device information
+Table 1-7: IDE device information
..............................................................................
File Content
cache The cache
@@ -673,12 +831,12 @@ the drive parameters:
1.4 Networking info in /proc/net
--------------------------------
-The subdirectory /proc/net follows the usual pattern. Table 1-6 shows the
+The subdirectory /proc/net follows the usual pattern. Table 1-8 shows the
additional values you get for IP version 6 if you configure the kernel to
-support this. Table 1-7 lists the files and their meaning.
+support this. Table 1-9 lists the files and their meaning.
-Table 1-6: IPv6 info in /proc/net
+Table 1-8: IPv6 info in /proc/net
..............................................................................
File Content
udp6 UDP sockets (IPv6)
@@ -693,7 +851,7 @@ Table 1-6: IPv6 info in /proc/net
..............................................................................
-Table 1-7: Network info in /proc/net
+Table 1-9: Network info in /proc/net
..............................................................................
File Content
arp Kernel ARP table
@@ -817,10 +975,10 @@ The directory /proc/parport contains information about the parallel ports of
your system. It has one subdirectory for each port, named after the port
number (0,1,2,...).
-These directories contain the four files shown in Table 1-8.
+These directories contain the four files shown in Table 1-10.
-Table 1-8: Files in /proc/parport
+Table 1-10: Files in /proc/parport
..............................................................................
File Content
autoprobe Any IEEE-1284 device ID information that has been acquired.
@@ -838,10 +996,10 @@ Table 1-8: Files in /proc/parport
Information about the available and actually used tty's can be found in the
directory /proc/tty.You'll find entries for drivers and line disciplines in
-this directory, as shown in Table 1-9.
+this directory, as shown in Table 1-11.
-Table 1-9: Files in /proc/tty
+Table 1-11: Files in /proc/tty
..............................................................................
File Content
drivers list of drivers and their usage
@@ -883,6 +1041,7 @@ since the system first booted. For a quick look, simply cat the file:
processes 2915
procs_running 1
procs_blocked 0
+ softirq 183433 0 21755 12 39 1137 231 21459 2263
The very first "cpu" line aggregates the numbers in all of the other "cpuN"
lines. These numbers identify the amount of time the CPU has spent performing
@@ -918,6 +1077,11 @@ CPUs.
The "procs_blocked" line gives the number of processes currently blocked,
waiting for I/O to complete.
+The "softirq" line gives counts of softirqs serviced since boot time, for each
+of the possible system softirqs. The first column is the total of all
+softirqs serviced; each subsequent column is the total for that particular
+softirq.
+
1.9 Ext4 file system parameters
------------------------------
@@ -926,9 +1090,9 @@ Information about mounted ext4 file systems can be found in
/proc/fs/ext4. Each mounted filesystem will have a directory in
/proc/fs/ext4 based on its device name (i.e., /proc/fs/ext4/hdc or
/proc/fs/ext4/dm-0). The files in each per-device directory are shown
-in Table 1-10, below.
+in Table 1-12, below.
-Table 1-10: Files in /proc/fs/ext4/<devname>
+Table 1-12: Files in /proc/fs/ext4/<devname>
..............................................................................
File Content
mb_groups details of multiblock allocator buddy cache of free blocks