summaryrefslogtreecommitdiff
path: root/Documentation/isdn/README.syncppp
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/isdn/README.syncppp')
-rw-r--r--Documentation/isdn/README.syncppp58
1 files changed, 58 insertions, 0 deletions
diff --git a/Documentation/isdn/README.syncppp b/Documentation/isdn/README.syncppp
new file mode 100644
index 000000000000..27d260095cce
--- /dev/null
+++ b/Documentation/isdn/README.syncppp
@@ -0,0 +1,58 @@
+Some additional information for setting up a syncPPP
+connection using network interfaces.
+---------------------------------------------------------------
+
+You need one thing beside the isdn4linux package:
+
+ a patched pppd .. (I called it ipppd to show the difference)
+
+Compiling isdn4linux with sync PPP:
+-----------------------------------
+To compile isdn4linux with the sync PPP part, you have
+to answer the appropriate question when doing a "make config"
+Don't forget to load the slhc.o
+module before the isdn.o module, if VJ-compression support
+is not compiled into your kernel. (e.g if you have no PPP or
+CSLIP in the kernel)
+
+Using isdn4linux with sync PPP:
+-------------------------------
+Sync PPP is just another encapsulation for isdn4linux. The
+name to enable sync PPP encapsulation is 'syncppp' .. e.g:
+
+ /sbin/isdnctrl encap ippp0 syncppp
+
+The name of the interface is here 'ippp0'. You need
+one interface with the name 'ippp0' to saturate the
+ipppd, which checks the ppp version via this interface.
+Currently, all devices must have the name ipppX where
+'X' is a decimal value.
+
+To set up a PPP connection you need the ipppd .. You must start
+the ipppd once after installing the modules. The ipppd
+communicates with the isdn4linux link-level driver using the
+/dev/ippp0 to /dev/ippp15 devices. One ipppd can handle
+all devices at once. If you want to use two PPP connections
+at the same time, you have to connect the ipppd to two
+devices .. and so on.
+I've implemented one additional option for the ipppd:
+ 'useifip' will get (if set to not 0.0.0.0) the IP address
+ for the negotiation from the attached network-interface.
+(also: ipppd will try to negotiate pointopoint IP as remote IP)
+You must disable BSD-compression, this implementation can't
+handle compressed packets.
+
+Check the etc/rc.isdn.syncppp in the isdn4kernel-util package
+for an example setup script.
+
+To use the MPPP stuff, you must configure a slave device
+with isdn4linux. Now call the ipppd with the '+mp' option.
+To increase the number of links, you must use the
+'addlink' option of the isdnctrl tool. (rc.isdn.syncppp.MPPP is
+an example script)
+
+enjoy it,
+ michael
+
+
+