summaryrefslogtreecommitdiff
path: root/Documentation/usb/gadget_serial.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/usb/gadget_serial.txt')
-rw-r--r--Documentation/usb/gadget_serial.txt332
1 files changed, 332 insertions, 0 deletions
diff --git a/Documentation/usb/gadget_serial.txt b/Documentation/usb/gadget_serial.txt
new file mode 100644
index 000000000000..a938c3dd13d6
--- /dev/null
+++ b/Documentation/usb/gadget_serial.txt
@@ -0,0 +1,332 @@
+
+ Linux Gadget Serial Driver v2.0
+ 11/20/2004
+
+
+License and Disclaimer
+----------------------
+This program is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation; either version 2 of
+the License, or (at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public
+License along with this program; if not, write to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+MA 02111-1307 USA.
+
+This document and the the gadget serial driver itself are
+Copyright (C) 2004 by Al Borchers (alborchers@steinerpoint.com).
+
+If you have questions, problems, or suggestions for this driver
+please contact Al Borchers at alborchers@steinerpoint.com.
+
+
+Prerequisites
+-------------
+Versions of the gadget serial driver are available for the
+2.4 Linux kernels, but this document assumes you are using
+version 2.0 or later of the gadget serial driver in a 2.6
+Linux kernel.
+
+This document assumes that you are familiar with Linux and
+Windows and know how to configure and build Linux kernels, run
+standard utilities, use minicom and HyperTerminal, and work with
+USB and serial devices. It also assumes you configure the Linux
+gadget and usb drivers as modules.
+
+
+Overview
+--------
+The gadget serial driver is a Linux USB gadget driver, a USB device
+side driver. It runs on a Linux system that has USB device side
+hardware; for example, a PDA, an embedded Linux system, or a PC
+with a USB development card.
+
+The gadget serial driver talks over USB to either a CDC ACM driver
+or a generic USB serial driver running on a host PC.
+
+ Host
+ --------------------------------------
+ | Host-Side CDC ACM USB Host |
+ | Operating | or | Controller | USB
+ | System | Generic USB | Driver |--------
+ | (Linux or | Serial | and | |
+ | Windows) Driver USB Stack | |
+ -------------------------------------- |
+ |
+ |
+ |
+ Gadget |
+ -------------------------------------- |
+ | Gadget USB Periph. | |
+ | Device-Side | Gadget | Controller | |
+ | Linux | Serial | Driver |--------
+ | Operating | Driver | and |
+ | System USB Stack |
+ --------------------------------------
+
+On the device-side Linux system, the gadget serial driver looks
+like a serial device.
+
+On the host-side system, the gadget serial device looks like a
+CDC ACM compliant class device or a simple vendor specific device
+with bulk in and bulk out endpoints, and it is treated similarly
+to other serial devices.
+
+The host side driver can potentially be any ACM compliant driver
+or any driver that can talk to a device with a simple bulk in/out
+interface. Gadget serial has been tested with the Linux ACM driver,
+the Windows usbser.sys ACM driver, and the Linux USB generic serial
+driver.
+
+With the gadget serial driver and the host side ACM or generic
+serial driver running, you should be able to communicate between
+the host and the gadget side systems as if they were connected by a
+serial cable.
+
+The gadget serial driver only provides simple unreliable data
+communication. It does not yet handle flow control or many other
+features of normal serial devices.
+
+
+Installing the Gadget Serial Driver
+-----------------------------------
+To use the gadget serial driver you must configure the Linux gadget
+side kernel for "Support for USB Gadgets", for a "USB Peripheral
+Controller" (for example, net2280), and for the "Serial Gadget"
+driver. All this are listed under "USB Gadget Support" when
+configuring the kernel. Then rebuild and install the kernel or
+modules.
+
+The gadget serial driver uses major number 127, for now. So you
+will need to create a device node for it, like this:
+
+ mknod /dev/ttygserial c 127 0
+
+You only need to do this once.
+
+Then you must load the gadget serial driver. To load it as an
+ACM device, do this:
+
+ modprobe g_serial use_acm=1
+
+To load it as a vendor specific bulk in/out device, do this:
+
+ modprobe g_serial
+
+This will also automatically load the underlying gadget peripheral
+controller driver. This must be done each time you reboot the gadget
+side Linux system. You can add this to the start up scripts, if
+desired.
+
+If gadget serial is loaded as an ACM device you will want to use
+either the Windows or Linux ACM driver on the host side. If gadget
+serial is loaded as a bulk in/out device, you will want to use the
+Linux generic serial driver on the host side. Follow the appropriate
+instructions below to install the host side driver.
+
+
+Installing the Windows Host ACM Driver
+--------------------------------------
+To use the Windows ACM driver you must have the files "gserial.inf"
+and "usbser.sys" together in a folder on the Windows machine.
+
+The "gserial.inf" file is given here.
+
+-------------------- CUT HERE --------------------
+[Version]
+Signature="$Windows NT$"
+Class=Ports
+ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
+Provider=%LINUX%
+DriverVer=08/17/2004,0.0.2.0
+; Copyright (C) 2004 Al Borchers (alborchers@steinerpoint.com)
+
+[Manufacturer]
+%LINUX%=GSerialDeviceList
+
+[GSerialDeviceList]
+%GSERIAL%=GSerialInstall, USB\VID_0525&PID_A4A7
+
+[DestinationDirs]
+DefaultDestDir=10,System32\Drivers
+
+[GSerialInstall]
+CopyFiles=GSerialCopyFiles
+AddReg=GSerialAddReg
+
+[GSerialCopyFiles]
+usbser.sys
+
+[GSerialAddReg]
+HKR,,DevLoader,,*ntkern
+HKR,,NTMPDriver,,usbser.sys
+HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
+
+[GSerialInstall.Services]
+AddService = usbser,0x0002,GSerialService
+
+[GSerialService]
+DisplayName = %GSERIAL_DISPLAY_NAME%
+ServiceType = 1 ; SERVICE_KERNEL_DRIVER
+StartType = 3 ; SERVICE_DEMAND_START
+ErrorControl = 1 ; SERVICE_ERROR_NORMAL
+ServiceBinary = %10%\System32\Drivers\usbser.sys
+LoadOrderGroup = Base
+
+[Strings]
+LINUX = "Linux"
+GSERIAL = "Gadget Serial"
+GSERIAL_DISPLAY_NAME = "USB Gadget Serial Driver"
+-------------------- CUT HERE --------------------
+
+The "usbser.sys" file comes with various versions of Windows.
+For example, it can be found on Windows XP typically in
+
+ C:\WINDOWS\Driver Cache\i386\driver.cab
+
+Or it can be found on the Windows 98SE CD in the "win98" folder
+in the "DRIVER11.CAB" through "DRIVER20.CAB" cab files. You will
+need the DOS "expand" program, the Cygwin "cabextract" program, or
+a similar program to unpack these cab files and extract "usbser.sys".
+
+For example, to extract "usbser.sys" into the current directory
+on Windows XP, open a DOS window and run a command like
+
+ expand C:\WINDOWS\Driver~1\i386\driver.cab -F:usbser.sys .
+
+(Thanks to Nishant Kamat for pointing out this DOS command.)
+
+When the gadget serial driver is loaded and the USB device connected
+to the Windows host with a USB cable, Windows should recognize the
+gadget serial device and ask for a driver. Tell Windows to find the
+driver in the folder that contains "gserial.inf" and "usbser.sys".
+
+For example, on Windows XP, when the gadget serial device is first
+plugged in, the "Found New Hardware Wizard" starts up. Select
+"Install from a list or specific location (Advanced)", then on
+the next screen select "Include this location in the search" and
+enter the path or browse to the folder containing "gserial.inf" and
+"usbser.sys". Windows will complain that the Gadget Serial driver
+has not passed Windows Logo testing, but select "Continue anyway"
+and finish the driver installation.
+
+On Windows XP, in the "Device Manager" (under "Control Panel",
+"System", "Hardware") expand the "Ports (COM & LPT)" entry and you
+should see "Gadget Serial" listed as the driver for one of the COM
+ports.
+
+To uninstall the Windows XP driver for "Gadget Serial", right click
+on the "Gadget Serial" entry in the "Device Manager" and select
+"Uninstall".
+
+
+Installing the Linux Host ACM Driver
+------------------------------------
+To use the Linux ACM driver you must configure the Linux host side
+kernel for "Support for Host-side USB" and for "USB Modem (CDC ACM)
+support".
+
+Once the gadget serial driver is loaded and the USB device connected
+to the Linux host with a USB cable, the host system should recognize
+the gadget serial device. For example, the command
+
+ cat /proc/bus/usb/devices
+
+should show something like this:
+
+T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 5 Spd=480 MxCh= 0
+D: Ver= 2.00 Cls=02(comm.) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
+P: Vendor=0525 ProdID=a4a7 Rev= 2.01
+S: Manufacturer=Linux 2.6.8.1 with net2280
+S: Product=Gadget Serial
+S: SerialNumber=0
+C:* #Ifs= 2 Cfg#= 2 Atr=c0 MxPwr= 2mA
+I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=acm
+E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
+I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=acm
+E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+
+If the host side Linux system is configured properly, the ACM driver
+should be loaded automatically. The command "lsmod" should show the
+"acm" module is loaded.
+
+
+Installing the Linux Host Generic USB Serial Driver
+---------------------------------------------------
+To use the Linux generic USB serial driver you must configure the
+Linux host side kernel for "Support for Host-side USB", for "USB
+Serial Converter support", and for the "USB Generic Serial Driver".
+
+Once the gadget serial driver is loaded and the USB device connected
+to the Linux host with a USB cable, the host system should recognize
+the gadget serial device. For example, the command
+
+ cat /proc/bus/usb/devices
+
+should show something like this:
+
+T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 6 Spd=480 MxCh= 0
+D: Ver= 2.00 Cls=ff(vend.) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
+P: Vendor=0525 ProdID=a4a6 Rev= 2.01
+S: Manufacturer=Linux 2.6.8.1 with net2280
+S: Product=Gadget Serial
+S: SerialNumber=0
+C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA
+I: If#= 0 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=serial
+E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+
+You must explicitly load the usbserial driver with parameters to
+configure it to recognize the gadget serial device, like this:
+
+ modprobe usbserial vendor=0x0525 product=0xA4A6
+
+If everything is working, usbserial will print a message in the
+system log saying something like "Gadget Serial converter now
+attached to ttyUSB0".
+
+
+Testing with Minicom or HyperTerminal
+-------------------------------------
+Once the gadget serial driver and the host driver are both installed,
+and a USB cable connects the gadget device to the host, you should
+be able to communicate over USB between the gadget and host systems.
+You can use minicom or HyperTerminal to try this out.
+
+On the gadget side run "minicom -s" to configure a new minicom
+session. Under "Serial port setup" set "/dev/ttygserial" as the
+"Serial Device". Set baud rate, data bits, parity, and stop bits,
+to 9600, 8, none, and 1--these settings mostly do not matter.
+Under "Modem and dialing" erase all the modem and dialing strings.
+
+On a Linux host running the ACM driver, configure minicom similarly
+but use "/dev/ttyACM0" as the "Serial Device". (If you have other
+ACM devices connected, change the device name appropriately.)
+
+On a Linux host running the USB generic serial driver, configure
+minicom similarly, but use "/dev/ttyUSB0" as the "Serial Device".
+(If you have other USB serial devices connected, change the device
+name appropriately.)
+
+On a Windows host configure a new HyperTerminal session to use the
+COM port assigned to Gadget Serial. The "Port Settings" will be
+set automatically when HyperTerminal connects to the gadget serial
+device, so you can leave them set to the default values--these
+settings mostly do not matter.
+
+With minicom configured and running on the gadget side and with
+minicom or HyperTerminal configured and running on the host side,
+you should be able to send data back and forth between the gadget
+side and host side systems. Anything you type on the terminal
+window on the gadget side should appear in the terminal window on
+the host side and vice versa.
+
+