diff options
Diffstat (limited to 'Documentation')
23 files changed, 628 insertions, 1400 deletions
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone index 063bda7fe707..698b8081c473 100644 --- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone +++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone @@ -1,4 +1,4 @@ -What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/actual_dpi +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kone/roccatkone<minor>/actual_dpi Date: March 2010 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: It is possible to switch the dpi setting of the mouse with the @@ -17,13 +17,13 @@ Description: It is possible to switch the dpi setting of the mouse with the This file is readonly. -What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/actual_profile +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kone/roccatkone<minor>/actual_profile Date: March 2010 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: When read, this file returns the number of the actual profile. This file is readonly. -What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/firmware_version +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kone/roccatkone<minor>/firmware_version Date: March 2010 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: When read, this file returns the raw integer version number of the @@ -33,7 +33,7 @@ Description: When read, this file returns the raw integer version number of the left. E.g. a returned value of 138 means 1.38 This file is readonly. -What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/profile[1-5] +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kone/roccatkone<minor>/profile[1-5] Date: March 2010 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: The mouse can store 5 profiles which can be switched by the @@ -48,7 +48,7 @@ Description: The mouse can store 5 profiles which can be switched by the stored in the profile doesn't need to fit the number of the store. -What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/settings +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kone/roccatkone<minor>/settings Date: March 2010 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: When read, this file returns the settings stored in the mouse. @@ -58,7 +58,7 @@ Description: When read, this file returns the settings stored in the mouse. The data has to be 36 bytes long. The mouse will reject invalid data. -What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/startup_profile +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kone/roccatkone<minor>/startup_profile Date: March 2010 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: The integer value of this attribute ranges from 1 to 5. @@ -67,7 +67,7 @@ Description: The integer value of this attribute ranges from 1 to 5. When written, this file sets the number of the startup profile and the mouse activates this profile immediately. -What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/tcu +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kone/roccatkone<minor>/tcu Date: March 2010 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: The mouse has a "Tracking Control Unit" which lets the user @@ -78,7 +78,7 @@ Description: The mouse has a "Tracking Control Unit" which lets the user Writing 1 in this file will start the calibration which takes around 6 seconds to complete and activates the TCU. -What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/weight +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kone/roccatkone<minor>/weight Date: March 2010 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: The mouse can be equipped with one of four supplied weights diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus b/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus new file mode 100644 index 000000000000..0f9f30eb1742 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus @@ -0,0 +1,108 @@ +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/actual_profile +Date: October 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When read, this file returns the number of the actual profile in + range 0-4. + This file is readonly. + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/firmware_version +Date: October 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When read, this file returns the raw integer version number of the + firmware reported by the mouse. Using the integer value eases + further usage in other programs. To receive the real version + number the decimal point has to be shifted 2 positions to the + left. E.g. a returned value of 121 means 1.21 + This file is readonly. + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/macro +Date: October 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The mouse can store a macro with max 500 key/button strokes + internally. + When written, this file lets one set the sequence for a specific + button for a specific profile. Button and profile numbers are + included in written data. The data has to be 2082 bytes long. + This file is writeonly. + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile_buttons +Date: August 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The mouse can store 5 profiles which can be switched by the + press of a button. A profile is split in settings and buttons. + profile_buttons holds informations about button layout. + When written, this file lets one write the respective profile + buttons back to the mouse. The data has to be 77 bytes long. + The mouse will reject invalid data. + Which profile to write is determined by the profile number + contained in the data. + This file is writeonly. + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile[1-5]_buttons +Date: August 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The mouse can store 5 profiles which can be switched by the + press of a button. A profile is split in settings and buttons. + profile_buttons holds informations about button layout. + When read, these files return the respective profile buttons. + The returned data is 77 bytes in size. + This file is readonly. + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile_settings +Date: October 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The mouse can store 5 profiles which can be switched by the + press of a button. A profile is split in settings and buttons. + profile_settings holds informations like resolution, sensitivity + and light effects. + When written, this file lets one write the respective profile + settings back to the mouse. The data has to be 43 bytes long. + The mouse will reject invalid data. + Which profile to write is determined by the profile number + contained in the data. + This file is writeonly. + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile[1-5]_settings +Date: August 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The mouse can store 5 profiles which can be switched by the + press of a button. A profile is split in settings and buttons. + profile_settings holds informations like resolution, sensitivity + and light effects. + When read, these files return the respective profile settings. + The returned data is 43 bytes in size. + This file is readonly. + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/sensor +Date: October 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The mouse has a tracking- and a distance-control-unit. These + can be activated/deactivated and the lift-off distance can be + set. The data has to be 6 bytes long. + This file is writeonly. + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/startup_profile +Date: October 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The integer value of this attribute ranges from 0-4. + When read, this attribute returns the number of the profile + that's active when the mouse is powered on. + When written, this file sets the number of the startup profile + and the mouse activates this profile immediately. + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/tcu +Date: October 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When written a calibration process for the tracking control unit + can be initiated/cancelled. + The data has to be 3 bytes long. + This file is writeonly. + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/tcu_image +Date: October 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When read the mouse returns a 30x30 pixel image of the + sampled underground. This works only in the course of a + calibration process initiated with tcu. + The returned data is 1028 bytes in size. + This file is readonly. diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra b/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra index ad1125b02ff4..1c37b823f142 100644 --- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra +++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra @@ -1,4 +1,4 @@ -What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/actual_cpi +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/actual_cpi Date: August 2010 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: It is possible to switch the cpi setting of the mouse with the @@ -14,14 +14,14 @@ Description: It is possible to switch the cpi setting of the mouse with the This file is readonly. -What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/actual_profile +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/actual_profile Date: August 2010 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: When read, this file returns the number of the actual profile in range 0-4. This file is readonly. -What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/firmware_version +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/firmware_version Date: August 2010 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: When read, this file returns the raw integer version number of the @@ -31,7 +31,7 @@ Description: When read, this file returns the raw integer version number of the left. E.g. a returned value of 138 means 1.38 This file is readonly. -What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/profile_settings +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile_settings Date: August 2010 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: The mouse can store 5 profiles which can be switched by the @@ -45,7 +45,7 @@ Description: The mouse can store 5 profiles which can be switched by the contained in the data. This file is writeonly. -What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/profile[1-5]_settings +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile[1-5]_settings Date: August 2010 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: The mouse can store 5 profiles which can be switched by the @@ -56,7 +56,7 @@ Description: The mouse can store 5 profiles which can be switched by the The returned data is 13 bytes in size. This file is readonly. -What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/profile_buttons +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile_buttons Date: August 2010 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: The mouse can store 5 profiles which can be switched by the @@ -69,7 +69,7 @@ Description: The mouse can store 5 profiles which can be switched by the contained in the data. This file is writeonly. -What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/profile[1-5]_buttons +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile[1-5]_buttons Date: August 2010 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: The mouse can store 5 profiles which can be switched by the @@ -79,7 +79,7 @@ Description: The mouse can store 5 profiles which can be switched by the The returned data is 19 bytes in size. This file is readonly. -What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/startup_profile +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/startup_profile Date: August 2010 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: The integer value of this attribute ranges from 0-4. @@ -87,7 +87,7 @@ Description: The integer value of this attribute ranges from 0-4. that's active when the mouse is powered on. This file is readonly. -What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/settings +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/settings Date: August 2010 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: When read, this file returns the settings stored in the mouse. diff --git a/Documentation/ABI/testing/sysfs-platform-ideapad-laptop b/Documentation/ABI/testing/sysfs-platform-ideapad-laptop new file mode 100644 index 000000000000..807fca2ae2a4 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-platform-ideapad-laptop @@ -0,0 +1,6 @@ +What: /sys/devices/platform/ideapad/camera_power +Date: Dec 2010 +KernelVersion: 2.6.37 +Contact: "Ike Panhc <ike.pan@canonical.com>" +Description: + Control the power of camera module. 1 means on, 0 means off. diff --git a/Documentation/coccinelle.txt b/Documentation/coccinelle.txt index 4a276ea7001c..96b690348ba1 100644 --- a/Documentation/coccinelle.txt +++ b/Documentation/coccinelle.txt @@ -36,6 +36,10 @@ as a regular user, and install it with sudo make install +The semantic patches in the kernel will work best with Coccinelle version +0.2.4 or later. Using earlier versions may incur some parse errors in the +semantic patch code, but any results that are obtained should still be +correct. Using Coccinelle on the Linux kernel ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ diff --git a/Documentation/hwmon/ds620 b/Documentation/hwmon/ds620 new file mode 100644 index 000000000000..1fbe3cd916cc --- /dev/null +++ b/Documentation/hwmon/ds620 @@ -0,0 +1,34 @@ +Kernel driver ds620 +=================== + +Supported chips: + * Dallas Semiconductor DS620 + Prefix: 'ds620' + Datasheet: Publicly available at the Dallas Semiconductor website + http://www.dalsemi.com/ + +Authors: + Roland Stigge <stigge@antcom.de> + based on ds1621.c by + Christian W. Zuckschwerdt <zany@triq.net> + +Description +----------- + +The DS620 is a (one instance) digital thermometer and thermostat. It has both +high and low temperature limits which can be user defined (i.e. programmed +into non-volatile on-chip registers). Temperature range is -55 degree Celsius +to +125. Between 0 and 70 degree Celsius, accuracy is 0.5 Kelvin. The value +returned via sysfs displays post decimal positions. + +The thermostat function works as follows: When configured via platform_data +(struct ds620_platform_data) .pomode == 0 (default), the thermostat output pin +PO is always low. If .pomode == 1, the thermostat is in PO_LOW mode. I.e., the +output pin PO becomes active when the temperature falls below temp1_min and +stays active until the temperature goes above temp1_max. + +Likewise, with .pomode == 2, the thermostat is in PO_HIGH mode. I.e., the PO +output pin becomes active when the temperature goes above temp1_max and stays +active until the temperature falls below temp1_min. + +The PO output pin of the DS620 operates active-low. diff --git a/Documentation/hwmon/sht21 b/Documentation/hwmon/sht21 new file mode 100644 index 000000000000..db17fda45c3e --- /dev/null +++ b/Documentation/hwmon/sht21 @@ -0,0 +1,49 @@ +Kernel driver sht21 +=================== + +Supported chips: + * Sensirion SHT21 + Prefix: 'sht21' + Addresses scanned: none + Datasheet: Publicly available at the Sensirion website + http://www.sensirion.com/en/pdf/product_information/Datasheet-humidity-sensor-SHT21.pdf + + * Sensirion SHT25 + Prefix: 'sht21' + Addresses scanned: none + Datasheet: Publicly available at the Sensirion website + http://www.sensirion.com/en/pdf/product_information/Datasheet-humidity-sensor-SHT25.pdf + +Author: + Urs Fleisch <urs.fleisch@sensirion.com> + +Description +----------- + +The SHT21 and SHT25 are humidity and temperature sensors in a DFN package of +only 3 x 3 mm footprint and 1.1 mm height. The difference between the two +devices is the higher level of precision of the SHT25 (1.8% relative humidity, +0.2 degree Celsius) compared with the SHT21 (2.0% relative humidity, +0.3 degree Celsius). + +The devices communicate with the I2C protocol. All sensors are set to the same +I2C address 0x40, so an entry with I2C_BOARD_INFO("sht21", 0x40) can be used +in the board setup code. + +sysfs-Interface +--------------- + +temp1_input - temperature input +humidity1_input - humidity input + +Notes +----- + +The driver uses the default resolution settings of 12 bit for humidity and 14 +bit for temperature, which results in typical measurement times of 22 ms for +humidity and 66 ms for temperature. To keep self heating below 0.1 degree +Celsius, the device should not be active for more than 10% of the time, +e.g. maximum two measurements per second at the given resolution. + +Different resolutions, the on-chip heater, using the CRC checksum and reading +the serial number are not supported yet. diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface index 645699010551..c6559f153589 100644 --- a/Documentation/hwmon/sysfs-interface +++ b/Documentation/hwmon/sysfs-interface @@ -384,10 +384,20 @@ curr[1-*]_min Current min value. Unit: milliampere RW +curr[1-*]_lcrit Current critical low value + Unit: milliampere + RW + +curr[1-*]_crit Current critical high value. + Unit: milliampere + RW + curr[1-*]_input Current input value Unit: milliampere RO +Also see the Alarms section for status flags associated with currents. + ********* * Power * ********* @@ -450,13 +460,6 @@ power[1-*]_accuracy Accuracy of the power meter. Unit: Percent RO -power[1-*]_alarm 1 if the system is drawing more power than the - cap allows; 0 otherwise. A poll notification is - sent to this file when the power use exceeds the - cap. This file only appears if the cap is known - to be enforced by hardware. - RO - power[1-*]_cap If power use rises above this limit, the system should take action to reduce power use. A poll notification is sent to this file if the @@ -479,6 +482,20 @@ power[1-*]_cap_min Minimum cap that can be set. Unit: microWatt RO +power[1-*]_max Maximum power. + Unit: microWatt + RW + +power[1-*]_crit Critical maximum power. + If power rises to or above this limit, the + system is expected take drastic action to reduce + power consumption, such as a system shutdown or + a forced powerdown of some devices. + Unit: microWatt + RW + +Also see the Alarms section for status flags associated with power readings. + ********** * Energy * ********** @@ -488,6 +505,15 @@ energy[1-*]_input Cumulative energy use RO +************ +* Humidity * +************ + +humidity[1-*]_input Humidity + Unit: milli-percent (per cent mille, pcm) + RO + + ********** * Alarms * ********** @@ -501,6 +527,7 @@ implementation. in[0-*]_alarm curr[1-*]_alarm +power[1-*]_alarm fan[1-*]_alarm temp[1-*]_alarm Channel alarm @@ -512,12 +539,20 @@ OR in[0-*]_min_alarm in[0-*]_max_alarm +in[0-*]_lcrit_alarm +in[0-*]_crit_alarm curr[1-*]_min_alarm curr[1-*]_max_alarm +curr[1-*]_lcrit_alarm +curr[1-*]_crit_alarm +power[1-*]_cap_alarm +power[1-*]_max_alarm +power[1-*]_crit_alarm fan[1-*]_min_alarm fan[1-*]_max_alarm temp[1-*]_min_alarm temp[1-*]_max_alarm +temp[1-*]_lcrit_alarm temp[1-*]_crit_alarm temp[1-*]_emergency_alarm Limit alarm diff --git a/Documentation/i2c/muxes/gpio-i2cmux b/Documentation/i2c/muxes/gpio-i2cmux new file mode 100644 index 000000000000..811cd78d4cdc --- /dev/null +++ b/Documentation/i2c/muxes/gpio-i2cmux @@ -0,0 +1,65 @@ +Kernel driver gpio-i2cmux + +Author: Peter Korsgaard <peter.korsgaard@barco.com> + +Description +----------- + +gpio-i2cmux is an i2c mux driver providing access to I2C bus segments +from a master I2C bus and a hardware MUX controlled through GPIO pins. + +E.G.: + + ---------- ---------- Bus segment 1 - - - - - + | | SCL/SDA | |-------------- | | + | |------------| | + | | | | Bus segment 2 | | + | Linux | GPIO 1..N | MUX |--------------- Devices + | |------------| | | | + | | | | Bus segment M + | | | |---------------| | + ---------- ---------- - - - - - + +SCL/SDA of the master I2C bus is multiplexed to bus segment 1..M +according to the settings of the GPIO pins 1..N. + +Usage +----- + +gpio-i2cmux uses the platform bus, so you need to provide a struct +platform_device with the platform_data pointing to a struct +gpio_i2cmux_platform_data with the I2C adapter number of the master +bus, the number of bus segments to create and the GPIO pins used +to control it. See include/linux/gpio-i2cmux.h for details. + +E.G. something like this for a MUX providing 4 bus segments +controlled through 3 GPIO pins: + +#include <linux/gpio-i2cmux.h> +#include <linux/platform_device.h> + +static const unsigned myboard_gpiomux_gpios[] = { + AT91_PIN_PC26, AT91_PIN_PC25, AT91_PIN_PC24 +}; + +static const unsigned myboard_gpiomux_values[] = { + 0, 1, 2, 3 +}; + +static struct gpio_i2cmux_platform_data myboard_i2cmux_data = { + .parent = 1, + .base_nr = 2, /* optional */ + .values = myboard_gpiomux_values, + .n_values = ARRAY_SIZE(myboard_gpiomux_values), + .gpios = myboard_gpiomux_gpios, + .n_gpios = ARRAY_SIZE(myboard_gpiomux_gpios), + .idle = 4, /* optional */ +}; + +static struct platform_device myboard_i2cmux = { + .name = "gpio-i2cmux", + .id = 0, + .dev = { + .platform_data = &myboard_i2cmux_data, + }, +}; diff --git a/Documentation/kbuild/kbuild.txt b/Documentation/kbuild/kbuild.txt index 1e5165aa9e4e..4a990317b84a 100644 --- a/Documentation/kbuild/kbuild.txt +++ b/Documentation/kbuild/kbuild.txt @@ -73,6 +73,14 @@ Specify the output directory when building the kernel. The output directory can also be specified using "O=...". Setting "O=..." takes precedence over KBUILD_OUTPUT. +KBUILD_DEBARCH +-------------------------------------------------- +For the deb-pkg target, allows overriding the normal heuristics deployed by +deb-pkg. Normally deb-pkg attempts to guess the right architecture based on +the UTS_MACHINE variable, and on some architectures also the kernel config. +The value of KBUILD_DEBARCH is assumed (not checked) to be a valid Debian +architecture. + ARCH -------------------------------------------------- Set ARCH to the architecture to be built. diff --git a/Documentation/kbuild/kconfig-language.txt b/Documentation/kbuild/kconfig-language.txt index 2fe93ca7c77c..b507d61fd41c 100644 --- a/Documentation/kbuild/kconfig-language.txt +++ b/Documentation/kbuild/kconfig-language.txt @@ -112,7 +112,6 @@ applicable everywhere (see syntax). (no prompts anywhere) and for symbols with no dependencies. That will limit the usefulness but on the other hand avoid the illegal configurations all over. - kconfig should one day warn about such things. - numerical ranges: "range" <symbol> <symbol> ["if" <expr>] This allows to limit the range of possible input values for int @@ -268,7 +267,7 @@ separate list of options. choices: - "choice" + "choice" [symbol] <choice options> <choice block> "endchoice" @@ -282,6 +281,10 @@ single driver can be compiled/loaded into the kernel, but all drivers can be compiled as modules. A choice accepts another option "optional", which allows to set the choice to 'n' and no entry needs to be selected. +If no [symbol] is associated with a choice, then you can not have multiple +definitions of that choice. If a [symbol] is associated to the choice, +then you may define the same choice (ie. with the same entries) in another +place. comment: diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt index 0ef00bd6e54d..86e3cd0d26a0 100644 --- a/Documentation/kbuild/makefiles.txt +++ b/Documentation/kbuild/makefiles.txt @@ -1136,6 +1136,21 @@ When kbuild executes, the following steps are followed (roughly): resulting in the target file being recompiled for no obvious reason. + dtc + Create flattend device tree blob object suitable for linking + into vmlinux. Device tree blobs linked into vmlinux are placed + in an init section in the image. Platform code *must* copy the + blob to non-init memory prior to calling unflatten_device_tree(). + + Example: + #arch/x86/platform/ce4100/Makefile + clean-files := *dtb.S + + DTC_FLAGS := -p 1024 + obj-y += foo.dtb.o + + $(obj)/%.dtb: $(src)/%.dts + $(call cmd,dtc) --- 6.7 Custom kbuild commands diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index f3dc951e949f..ed3708f8d0db 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -403,6 +403,10 @@ and is between 256 and 4096 characters. It is defined in the file bttv.pll= See Documentation/video4linux/bttv/Insmod-options bttv.tuner= and Documentation/video4linux/bttv/CARDLIST + bulk_remove=off [PPC] This parameter disables the use of the pSeries + firmware feature for flushing multiple hpte entries + at a time. + c101= [NET] Moxa C101 synchronous serial card cachesize= [BUGS=X86-32] Override level 2 CPU cache size detection. @@ -1490,6 +1494,10 @@ and is between 256 and 4096 characters. It is defined in the file mtdparts= [MTD] See drivers/mtd/cmdlinepart.c. + multitce=off [PPC] This parameter disables the use of the pSeries + firmware feature for updating multiple TCE entries + at a time. + onenand.bdry= [HW,MTD] Flex-OneNAND Boundary Configuration Format: [die0_boundary][,die0_lock][,die1_boundary][,die1_lock] diff --git a/Documentation/keys-trusted-encrypted.txt b/Documentation/keys-trusted-encrypted.txt new file mode 100644 index 000000000000..8fb79bc1ac4b --- /dev/null +++ b/Documentation/keys-trusted-encrypted.txt @@ -0,0 +1,145 @@ + Trusted and Encrypted Keys + +Trusted and Encrypted Keys are two new key types added to the existing kernel +key ring service. Both of these new types are variable length symmetic keys, +and in both cases all keys are created in the kernel, and user space sees, +stores, and loads only encrypted blobs. Trusted Keys require the availability +of a Trusted Platform Module (TPM) chip for greater security, while Encrypted +Keys can be used on any system. All user level blobs, are displayed and loaded +in hex ascii for convenience, and are integrity verified. + +Trusted Keys use a TPM both to generate and to seal the keys. Keys are sealed +under a 2048 bit RSA key in the TPM, and optionally sealed to specified PCR +(integrity measurement) values, and only unsealed by the TPM, if PCRs and blob +integrity verifications match. A loaded Trusted Key can be updated with new +(future) PCR values, so keys are easily migrated to new pcr values, such as +when the kernel and initramfs are updated. The same key can have many saved +blobs under different PCR values, so multiple boots are easily supported. + +By default, trusted keys are sealed under the SRK, which has the default +authorization value (20 zeros). This can be set at takeownership time with the +trouser's utility: "tpm_takeownership -u -z". + +Usage: + keyctl add trusted name "new keylen [options]" ring + keyctl add trusted name "load hex_blob [pcrlock=pcrnum]" ring + keyctl update key "update [options]" + keyctl print keyid + + options: + keyhandle= ascii hex value of sealing key default 0x40000000 (SRK) + keyauth= ascii hex auth for sealing key default 0x00...i + (40 ascii zeros) + blobauth= ascii hex auth for sealed data default 0x00... + (40 ascii zeros) + blobauth= ascii hex auth for sealed data default 0x00... + (40 ascii zeros) + pcrinfo= ascii hex of PCR_INFO or PCR_INFO_LONG (no default) + pcrlock= pcr number to be extended to "lock" blob + migratable= 0|1 indicating permission to reseal to new PCR values, + default 1 (resealing allowed) + +"keyctl print" returns an ascii hex copy of the sealed key, which is in standard +TPM_STORED_DATA format. The key length for new keys are always in bytes. +Trusted Keys can be 32 - 128 bytes (256 - 1024 bits), the upper limit is to fit +within the 2048 bit SRK (RSA) keylength, with all necessary structure/padding. + +Encrypted keys do not depend on a TPM, and are faster, as they use AES for +encryption/decryption. New keys are created from kernel generated random +numbers, and are encrypted/decrypted using a specified 'master' key. The +'master' key can either be a trusted-key or user-key type. The main +disadvantage of encrypted keys is that if they are not rooted in a trusted key, +they are only as secure as the user key encrypting them. The master user key +should therefore be loaded in as secure a way as possible, preferably early in +boot. + +Usage: + keyctl add encrypted name "new key-type:master-key-name keylen" ring + keyctl add encrypted name "load hex_blob" ring + keyctl update keyid "update key-type:master-key-name" + +where 'key-type' is either 'trusted' or 'user'. + +Examples of trusted and encrypted key usage: + +Create and save a trusted key named "kmk" of length 32 bytes: + + $ keyctl add trusted kmk "new 32" @u + 440502848 + + $ keyctl show + Session Keyring + -3 --alswrv 500 500 keyring: _ses + 97833714 --alswrv 500 -1 \_ keyring: _uid.500 + 440502848 --alswrv 500 500 \_ trusted: kmk + + $ keyctl print 440502848 + 0101000000000000000001005d01b7e3f4a6be5709930f3b70a743cbb42e0cc95e18e915 + 3f60da455bbf1144ad12e4f92b452f966929f6105fd29ca28e4d4d5a031d068478bacb0b + 27351119f822911b0a11ba3d3498ba6a32e50dac7f32894dd890eb9ad578e4e292c83722 + a52e56a097e6a68b3f56f7a52ece0cdccba1eb62cad7d817f6dc58898b3ac15f36026fec + d568bd4a706cb60bb37be6d8f1240661199d640b66fb0fe3b079f97f450b9ef9c22c6d5d + dd379f0facd1cd020281dfa3c70ba21a3fa6fc2471dc6d13ecf8298b946f65345faa5ef0 + f1f8fff03ad0acb083725535636addb08d73dedb9832da198081e5deae84bfaf0409c22b + e4a8aea2b607ec96931e6f4d4fe563ba + + $ keyctl pipe 440502848 > kmk.blob + +Load a trusted key from the saved blob: + + $ keyctl add trusted kmk "load `cat kmk.blob`" @u + 268728824 + + $ keyctl print 268728824 + 0101000000000000000001005d01b7e3f4a6be5709930f3b70a743cbb42e0cc95e18e915 + 3f60da455bbf1144ad12e4f92b452f966929f6105fd29ca28e4d4d5a031d068478bacb0b + 27351119f822911b0a11ba3d3498ba6a32e50dac7f32894dd890eb9ad578e4e292c83722 + a52e56a097e6a68b3f56f7a52ece0cdccba1eb62cad7d817f6dc58898b3ac15f36026fec + d568bd4a706cb60bb37be6d8f1240661199d640b66fb0fe3b079f97f450b9ef9c22c6d5d + dd379f0facd1cd020281dfa3c70ba21a3fa6fc2471dc6d13ecf8298b946f65345faa5ef0 + f1f8fff03ad0acb083725535636addb08d73dedb9832da198081e5deae84bfaf0409c22b + e4a8aea2b607ec96931e6f4d4fe563ba + +Reseal a trusted key under new pcr values: + + $ keyctl update 268728824 "update pcrinfo=`cat pcr.blob`" + $ keyctl print 268728824 + 010100000000002c0002800093c35a09b70fff26e7a98ae786c641e678ec6ffb6b46d805 + 77c8a6377aed9d3219c6dfec4b23ffe3000001005d37d472ac8a44023fbb3d18583a4f73 + d3a076c0858f6f1dcaa39ea0f119911ff03f5406df4f7f27f41da8d7194f45c9f4e00f2e + df449f266253aa3f52e55c53de147773e00f0f9aca86c64d94c95382265968c354c5eab4 + 9638c5ae99c89de1e0997242edfb0b501744e11ff9762dfd951cffd93227cc513384e7e6 + e782c29435c7ec2edafaa2f4c1fe6e7a781b59549ff5296371b42133777dcc5b8b971610 + 94bc67ede19e43ddb9dc2baacad374a36feaf0314d700af0a65c164b7082401740e489c9 + 7ef6a24defe4846104209bf0c3eced7fa1a672ed5b125fc9d8cd88b476a658a4434644ef + df8ae9a178e9f83ba9f08d10fa47e4226b98b0702f06b3b8 + +Create and save an encrypted key "evm" using the above trusted key "kmk": + + $ keyctl add encrypted evm "new trusted:kmk 32" @u + 159771175 + + $ keyctl print 159771175 + trusted:kmk 32 2375725ad57798846a9bbd240de8906f006e66c03af53b1b382dbbc55 + be2a44616e4959430436dc4f2a7a9659aa60bb4652aeb2120f149ed197c564e024717c64 + 5972dcb82ab2dde83376d82b2e3c09ffc + + $ keyctl pipe 159771175 > evm.blob + +Load an encrypted key "evm" from saved blob: + + $ keyctl add encrypted evm "load `cat evm.blob`" @u + 831684262 + + $ keyctl print 831684262 + trusted:kmk 32 2375725ad57798846a9bbd240de8906f006e66c03af53b1b382dbbc55 + be2a44616e4959430436dc4f2a7a9659aa60bb4652aeb2120f149ed197c564e024717c64 + 5972dcb82ab2dde83376d82b2e3c09ffc + + +The initial consumer of trusted keys is EVM, which at boot time needs a high +quality symmetric key for HMAC protection of file metadata. The use of a +trusted key provides strong guarantees that the EVM key has not been +compromised by a user level problem, and when sealed to specific boot PCR +values, protects against boot and offline attacks. Other uses for trusted and +encrypted keys, such as for disk and file encryption are anticipated. diff --git a/Documentation/make/headers_install.txt b/Documentation/make/headers_install.txt index f2481cabffcb..951eb9f1e040 100644 --- a/Documentation/make/headers_install.txt +++ b/Documentation/make/headers_install.txt @@ -39,8 +39,9 @@ INSTALL_HDR_PATH indicates where to install the headers. It defaults to The command "make headers_install_all" exports headers for all architectures simultaneously. (This is mostly of interest to distribution maintainers, who create an architecture-independent tarball from the resulting include -directory.) Remember to provide the appropriate linux/asm directory via "mv" -or "ln -s" before building a C library with headers exported this way. +directory.) You also can use HDR_ARCH_LIST to specify list of architectures. +Remember to provide the appropriate linux/asm directory via "mv" or "ln -s" +before building a C library with headers exported this way. The kernel header export infrastructure is maintained by David Woodhouse <dwmw2@infradead.org>. diff --git a/Documentation/power/drivers-testing.txt b/Documentation/power/drivers-testing.txt index 7f7a737f7f9f..638afdf4d6b8 100644 --- a/Documentation/power/drivers-testing.txt +++ b/Documentation/power/drivers-testing.txt @@ -23,10 +23,10 @@ Once you have resolved the suspend/resume-related problems with your test system without the new driver, you are ready to test it: a) Build the driver as a module, load it and try the test modes of hibernation - (see: Documents/power/basic-pm-debugging.txt, 1). + (see: Documentation/power/basic-pm-debugging.txt, 1). b) Load the driver and attempt to hibernate in the "reboot", "shutdown" and - "platform" modes (see: Documents/power/basic-pm-debugging.txt, 1). + "platform" modes (see: Documentation/power/basic-pm-debugging.txt, 1). c) Compile the driver directly into the kernel and try the test modes of hibernation. @@ -34,12 +34,12 @@ c) Compile the driver directly into the kernel and try the test modes of d) Attempt to hibernate with the driver compiled directly into the kernel in the "reboot", "shutdown" and "platform" modes. -e) Try the test modes of suspend (see: Documents/power/basic-pm-debugging.txt, +e) Try the test modes of suspend (see: Documentation/power/basic-pm-debugging.txt, 2). [As far as the STR tests are concerned, it should not matter whether or not the driver is built as a module.] f) Attempt to suspend to RAM using the s2ram tool with the driver loaded - (see: Documents/power/basic-pm-debugging.txt, 2). + (see: Documentation/power/basic-pm-debugging.txt, 2). Each of the above tests should be repeated several times and the STD tests should be mixed with the STR tests. If any of them fails, the driver cannot be diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt index 41cc7b30d7dd..ffe55ffa540a 100644 --- a/Documentation/power/runtime_pm.txt +++ b/Documentation/power/runtime_pm.txt @@ -50,6 +50,15 @@ type's callbacks are not defined) of given device. The bus type, device type and device class callbacks are referred to as subsystem-level callbacks in what follows. +By default, the callbacks are always invoked in process context with interrupts +enabled. However, subsystems can use the pm_runtime_irq_safe() helper function +to tell the PM core that a device's ->runtime_suspend() and ->runtime_resume() +callbacks should be invoked in atomic context with interrupts disabled +(->runtime_idle() is still invoked the default way). This implies that these +callback routines must not block or sleep, but it also means that the +synchronous helper functions listed at the end of Section 4 can be used within +an interrupt handler or in an atomic context. + The subsystem-level suspend callback is _entirely_ _responsible_ for handling the suspend of the device as appropriate, which may, but need not include executing the device driver's own ->runtime_suspend() callback (from the @@ -237,6 +246,10 @@ defined in include/linux/pm.h: Section 8); it may be modified only by the pm_runtime_no_callbacks() helper function + unsigned int irq_safe; + - indicates that the ->runtime_suspend() and ->runtime_resume() callbacks + will be invoked with the spinlock held and interrupts disabled + unsigned int use_autosuspend; - indicates that the device's driver supports delayed autosuspend (see Section 9); it may be modified only by the @@ -344,6 +357,10 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h: - decrement the device's usage counter; if the result is 0 then run pm_runtime_idle(dev) and return its result + int pm_runtime_put_sync_suspend(struct device *dev); + - decrement the device's usage counter; if the result is 0 then run + pm_runtime_suspend(dev) and return its result + int pm_runtime_put_sync_autosuspend(struct device *dev); - decrement the device's usage counter; if the result is 0 then run pm_runtime_autosuspend(dev) and return its result @@ -397,6 +414,11 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h: PM attributes from /sys/devices/.../power (or prevent them from being added when the device is registered) + void pm_runtime_irq_safe(struct device *dev); + - set the power.irq_safe flag for the device, causing the runtime-PM + suspend and resume callbacks (but not the idle callback) to be invoked + with interrupts disabled + void pm_runtime_mark_last_busy(struct device *dev); - set the power.last_busy field to the current time @@ -438,6 +460,15 @@ pm_runtime_suspended() pm_runtime_mark_last_busy() pm_runtime_autosuspend_expiration() +If pm_runtime_irq_safe() has been called for a device then the following helper +functions may also be used in interrupt context: + +pm_runtime_suspend() +pm_runtime_autosuspend() +pm_runtime_resume() +pm_runtime_get_sync() +pm_runtime_put_sync_suspend() + 5. Run-time PM Initialization, Device Probing and Removal Initially, the run-time PM is disabled for all devices, which means that the diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index 302db5da49b3..3272ed59dec7 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -131,7 +131,7 @@ order to avoid the degeneration that had become the ppc32 kernel entry point and the way a new platform should be added to the kernel. The legacy iSeries platform breaks those rules as it predates this scheme, but no new board support will be accepted in the main tree that -doesn't follows them properly. In addition, since the advent of the +doesn't follow them properly. In addition, since the advent of the arch/powerpc merged architecture for ppc32 and ppc64, new 32-bit platforms and 32-bit platforms which move into arch/powerpc will be required to use these rules as well. @@ -1025,7 +1025,7 @@ dtc source code can be found at WARNING: This version is still in early development stage; the resulting device-tree "blobs" have not yet been validated with the -kernel. The current generated bloc lacks a useful reserve map (it will +kernel. The current generated block lacks a useful reserve map (it will be fixed to generate an empty one, it's up to the bootloader to fill it up) among others. The error handling needs work, bugs are lurking, etc... diff --git a/Documentation/powerpc/dts-bindings/4xx/cpm.txt b/Documentation/powerpc/dts-bindings/4xx/cpm.txt new file mode 100644 index 000000000000..ee459806d35e --- /dev/null +++ b/Documentation/powerpc/dts-bindings/4xx/cpm.txt @@ -0,0 +1,52 @@ +PPC4xx Clock Power Management (CPM) node + +Required properties: + - compatible : compatible list, currently only "ibm,cpm" + - dcr-access-method : "native" + - dcr-reg : < DCR register range > + +Optional properties: + - er-offset : All 4xx SoCs with a CPM controller have + one of two different order for the CPM + registers. Some have the CPM registers + in the following order (ER,FR,SR). The + others have them in the following order + (SR,ER,FR). For the second case set + er-offset = <1>. + - unused-units : specifier consist of one cell. For each + bit in the cell, the corresponding bit + in CPM will be set to turn off unused + devices. + - idle-doze : specifier consist of one cell. For each + bit in the cell, the corresponding bit + in CPM will be set to turn off unused + devices. This is usually just CPM[CPU]. + - standby : specifier consist of one cell. For each + bit in the cell, the corresponding bit + in CPM will be set on standby and + restored on resume. + - suspend : specifier consist of one cell. For each + bit in the cell, the corresponding bit + in CPM will be set on suspend (mem) and + restored on resume. Note, for standby + and suspend the corresponding bits can + be different or the same. Usually for + standby only class 2 and 3 units are set. + However, the interface does not care. + If they are the same, the additional + power saving will be seeing if support + is available to put the DDR in self + refresh mode and any additional power + saving techniques for the specific SoC. + +Example: + CPM0: cpm { + compatible = "ibm,cpm"; + dcr-access-method = "native"; + dcr-reg = <0x160 0x003>; + er-offset = <0>; + unused-units = <0x00000100>; + idle-doze = <0x02000000>; + standby = <0xfeff0000>; + suspend = <0xfeff791d>; +}; diff --git a/Documentation/powerpc/dts-bindings/eeprom.txt b/Documentation/powerpc/dts-bindings/eeprom.txt new file mode 100644 index 000000000000..4342c10de1bf --- /dev/null +++ b/Documentation/powerpc/dts-bindings/eeprom.txt @@ -0,0 +1,28 @@ +EEPROMs (I2C) + +Required properties: + + - compatible : should be "<manufacturer>,<type>" + If there is no specific driver for <manufacturer>, a generic + driver based on <type> is selected. Possible types are: + 24c00, 24c01, 24c02, 24c04, 24c08, 24c16, 24c32, 24c64, + 24c128, 24c256, 24c512, 24c1024, spd + + - reg : the I2C address of the EEPROM + +Optional properties: + + - pagesize : the length of the pagesize for writing. Please consult the + manual of your device, that value varies a lot. A wrong value + may result in data loss! If not specified, a safety value of + '1' is used which will be very slow. + + - read-only: this parameterless property disables writes to the eeprom + +Example: + +eeprom@52 { + compatible = "atmel,24c32"; + reg = <0x52>; + pagesize = <32>; +}; diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt index 209e1584c3dc..574067194f38 100644 --- a/Documentation/sysctl/kernel.txt +++ b/Documentation/sysctl/kernel.txt @@ -219,7 +219,7 @@ dmesg_restrict: This toggle indicates whether unprivileged users are prevented from using dmesg(8) to view messages from the kernel's log buffer. When dmesg_restrict is set to (0) there are no restrictions. When -dmesg_restrict is set set to (1), users must have CAP_SYS_ADMIN to use +dmesg_restrict is set set to (1), users must have CAP_SYSLOG to use dmesg(8). The kernel config option CONFIG_SECURITY_DMESG_RESTRICT sets the default diff --git a/Documentation/vm/Makefile b/Documentation/vm/Makefile index 9dcff328b964..3fa4d0668864 100644 --- a/Documentation/vm/Makefile +++ b/Documentation/vm/Makefile @@ -2,7 +2,7 @@ obj- := dummy.o # List of programs to build -hostprogs-y := slabinfo page-types hugepage-mmap hugepage-shm map_hugetlb +hostprogs-y := page-types hugepage-mmap hugepage-shm map_hugetlb # Tell kbuild to always build the programs always := $(hostprogs-y) diff --git a/Documentation/vm/slabinfo.c b/Documentation/vm/slabinfo.c deleted file mode 100644 index 92e729f4b676..000000000000 --- a/Documentation/vm/slabinfo.c +++ /dev/null @@ -1,1364 +0,0 @@ -/* - * Slabinfo: Tool to get reports about slabs - * - * (C) 2007 sgi, Christoph Lameter - * - * Compile by: - * - * gcc -o slabinfo slabinfo.c - */ -#include <stdio.h> -#include <stdlib.h> -#include <sys/types.h> -#include <dirent.h> -#include <strings.h> -#include <string.h> -#include <unistd.h> -#include <stdarg.h> -#include <getopt.h> -#include <regex.h> -#include <errno.h> - -#define MAX_SLABS 500 -#define MAX_ALIASES 500 -#define MAX_NODES 1024 - -struct slabinfo { - char *name; - int alias; - int refs; - int aliases, align, cache_dma, cpu_slabs, destroy_by_rcu; - int hwcache_align, object_size, objs_per_slab; - int sanity_checks, slab_size, store_user, trace; - int order, poison, reclaim_account, red_zone; - unsigned long partial, objects, slabs, objects_partial, objects_total; - unsigned long alloc_fastpath, alloc_slowpath; - unsigned long free_fastpath, free_slowpath; - unsigned long free_frozen, free_add_partial, free_remove_partial; - unsigned long alloc_from_partial, alloc_slab, free_slab, alloc_refill; - unsigned long cpuslab_flush, deactivate_full, deactivate_empty; - unsigned long deactivate_to_head, deactivate_to_tail; - unsigned long deactivate_remote_frees, order_fallback; - int numa[MAX_NODES]; - int numa_partial[MAX_NODES]; -} slabinfo[MAX_SLABS]; - -struct aliasinfo { - char *name; - char *ref; - struct slabinfo *slab; -} aliasinfo[MAX_ALIASES]; - -int slabs = 0; -int actual_slabs = 0; -int aliases = 0; -int alias_targets = 0; -int highest_node = 0; - -char buffer[4096]; - -int show_empty = 0; -int show_report = 0; -int show_alias = 0; -int show_slab = 0; -int skip_zero = 1; -int show_numa = 0; -int show_track = 0; -int show_first_alias = 0; -int validate = 0; -int shrink = 0; -int show_inverted = 0; -int show_single_ref = 0; -int show_totals = 0; -int sort_size = 0; -int sort_active = 0; -int set_debug = 0; -int show_ops = 0; -int show_activity = 0; - -/* Debug options */ -int sanity = 0; -int redzone = 0; -int poison = 0; -int tracking = 0; -int tracing = 0; - -int page_size; - -regex_t pattern; - -static void fatal(const char *x, ...) -{ - va_list ap; - - va_start(ap, x); - vfprintf(stderr, x, ap); - va_end(ap); - exit(EXIT_FAILURE); -} - -static void usage(void) -{ - printf("slabinfo 5/7/2007. (c) 2007 sgi.\n\n" - "slabinfo [-ahnpvtsz] [-d debugopts] [slab-regexp]\n" - "-a|--aliases Show aliases\n" - "-A|--activity Most active slabs first\n" - "-d<options>|--debug=<options> Set/Clear Debug options\n" - "-D|--display-active Switch line format to activity\n" - "-e|--empty Show empty slabs\n" - "-f|--first-alias Show first alias\n" - "-h|--help Show usage information\n" - "-i|--inverted Inverted list\n" - "-l|--slabs Show slabs\n" - "-n|--numa Show NUMA information\n" - "-o|--ops Show kmem_cache_ops\n" - "-s|--shrink Shrink slabs\n" - "-r|--report Detailed report on single slabs\n" - "-S|--Size Sort by size\n" - "-t|--tracking Show alloc/free information\n" - "-T|--Totals Show summary information\n" - "-v|--validate Validate slabs\n" - "-z|--zero Include empty slabs\n" - "-1|--1ref Single reference\n" - "\nValid debug options (FZPUT may be combined)\n" - "a / A Switch on all debug options (=FZUP)\n" - "- Switch off all debug options\n" - "f / F Sanity Checks (SLAB_DEBUG_FREE)\n" - "z / Z Redzoning\n" - "p / P Poisoning\n" - "u / U Tracking\n" - "t / T Tracing\n" - ); -} - -static unsigned long read_obj(const char *name) -{ - FILE *f = fopen(name, "r"); - - if (!f) - buffer[0] = 0; - else { - if (!fgets(buffer, sizeof(buffer), f)) - buffer[0] = 0; - fclose(f); - if (buffer[strlen(buffer)] == '\n') - buffer[strlen(buffer)] = 0; - } - return strlen(buffer); -} - - -/* - * Get the contents of an attribute - */ -static unsigned long get_obj(const char *name) -{ - if (!read_obj(name)) - return 0; - - return atol(buffer); -} - -static unsigned long get_obj_and_str(const char *name, char **x) -{ - unsigned long result = 0; - char *p; - - *x = NULL; - - if (!read_obj(name)) { - x = NULL; - return 0; - } - result = strtoul(buffer, &p, 10); - while (*p == ' ') - p++; - if (*p) - *x = strdup(p); - return result; -} - -static void set_obj(struct slabinfo *s, const char *name, int n) -{ - char x[100]; - FILE *f; - - snprintf(x, 100, "%s/%s", s->name, name); - f = fopen(x, "w"); - if (!f) - fatal("Cannot write to %s\n", x); - - fprintf(f, "%d\n", n); - fclose(f); -} - -static unsigned long read_slab_obj(struct slabinfo *s, const char *name) -{ - char x[100]; - FILE *f; - size_t l; - - snprintf(x, 100, "%s/%s", s->name, name); - f = fopen(x, "r"); - if (!f) { - buffer[0] = 0; - l = 0; - } else { - l = fread(buffer, 1, sizeof(buffer), f); - buffer[l] = 0; - fclose(f); - } - return l; -} - - -/* - * Put a size string together - */ -static int store_size(char *buffer, unsigned long value) -{ - unsigned long divisor = 1; - char trailer = 0; - int n; - - if (value > 1000000000UL) { - divisor = 100000000UL; - trailer = 'G'; - } else if (value > 1000000UL) { - divisor = 100000UL; - trailer = 'M'; - } else if (value > 1000UL) { - divisor = 100; - trailer = 'K'; - } - - value /= divisor; - n = sprintf(buffer, "%ld",value); - if (trailer) { - buffer[n] = trailer; - n++; - buffer[n] = 0; - } - if (divisor != 1) { - memmove(buffer + n - 2, buffer + n - 3, 4); - buffer[n-2] = '.'; - n++; - } - return n; -} - -static void decode_numa_list(int *numa, char *t) -{ - int node; - int nr; - - memset(numa, 0, MAX_NODES * sizeof(int)); - - if (!t) - return; - - while (*t == 'N') { - t++; - node = strtoul(t, &t, 10); - if (*t == '=') { - t++; - nr = strtoul(t, &t, 10); - numa[node] = nr; - if (node > highest_node) - highest_node = node; - } - while (*t == ' ') - t++; - } -} - -static void slab_validate(struct slabinfo *s) -{ - if (strcmp(s->name, "*") == 0) - return; - - set_obj(s, "validate", 1); -} - -static void slab_shrink(struct slabinfo *s) -{ - if (strcmp(s->name, "*") == 0) - return; - - set_obj(s, "shrink", 1); -} - -int line = 0; - -static void first_line(void) -{ - if (show_activity) - printf("Name Objects Alloc Free %%Fast Fallb O\n"); - else - printf("Name Objects Objsize Space " - "Slabs/Part/Cpu O/S O %%Fr %%Ef Flg\n"); -} - -/* - * Find the shortest alias of a slab - */ -static struct aliasinfo *find_one_alias(struct slabinfo *find) -{ - struct aliasinfo *a; - struct aliasinfo *best = NULL; - - for(a = aliasinfo;a < aliasinfo + aliases; a++) { - if (a->slab == find && - (!best || strlen(best->name) < strlen(a->name))) { - best = a; - if (strncmp(a->name,"kmall", 5) == 0) - return best; - } - } - return best; -} - -static unsigned long slab_size(struct slabinfo *s) -{ - return s->slabs * (page_size << s->order); -} - -static unsigned long slab_activity(struct slabinfo *s) -{ - return s->alloc_fastpath + s->free_fastpath + - s->alloc_slowpath + s->free_slowpath; -} - -static void slab_numa(struct slabinfo *s, int mode) -{ - int node; - - if (strcmp(s->name, "*") == 0) - return; - - if (!highest_node) { - printf("\n%s: No NUMA information available.\n", s->name); - return; - } - - if (skip_zero && !s->slabs) - return; - - if (!line) { - printf("\n%-21s:", mode ? "NUMA nodes" : "Slab"); - for(node = 0; node <= highest_node; node++) - printf(" %4d", node); - printf("\n----------------------"); - for(node = 0; node <= highest_node; node++) - printf("-----"); - printf("\n"); - } - printf("%-21s ", mode ? "All slabs" : s->name); - for(node = 0; node <= highest_node; node++) { - char b[20]; - - store_size(b, s->numa[node]); - printf(" %4s", b); - } - printf("\n"); - if (mode) { - printf("%-21s ", "Partial slabs"); - for(node = 0; node <= highest_node; node++) { - char b[20]; - - store_size(b, s->numa_partial[node]); - printf(" %4s", b); - } - printf("\n"); - } - line++; -} - -static void show_tracking(struct slabinfo *s) -{ - printf("\n%s: Kernel object allocation\n", s->name); - printf("-----------------------------------------------------------------------\n"); - if (read_slab_obj(s, "alloc_calls")) - printf(buffer); - else - printf("No Data\n"); - - printf("\n%s: Kernel object freeing\n", s->name); - printf("------------------------------------------------------------------------\n"); - if (read_slab_obj(s, "free_calls")) - printf(buffer); - else - printf("No Data\n"); - -} - -static void ops(struct slabinfo *s) -{ - if (strcmp(s->name, "*") == 0) - return; - - if (read_slab_obj(s, "ops")) { - printf("\n%s: kmem_cache operations\n", s->name); - printf("--------------------------------------------\n"); - printf(buffer); - } else - printf("\n%s has no kmem_cache operations\n", s->name); -} - -static const char *onoff(int x) -{ - if (x) - return "On "; - return "Off"; -} - -static void slab_stats(struct slabinfo *s) -{ - unsigned long total_alloc; - unsigned long total_free; - unsigned long total; - - if (!s->alloc_slab) - return; - - total_alloc = s->alloc_fastpath + s->alloc_slowpath; - total_free = s->free_fastpath + s->free_slowpath; - - if (!total_alloc) - return; - - printf("\n"); - printf("Slab Perf Counter Alloc Free %%Al %%Fr\n"); - printf("--------------------------------------------------\n"); - printf("Fastpath %8lu %8lu %3lu %3lu\n", - s->alloc_fastpath, s->free_fastpath, - s->alloc_fastpath * 100 / total_alloc, - s->free_fastpath * 100 / total_free); - printf("Slowpath %8lu %8lu %3lu %3lu\n", - total_alloc - s->alloc_fastpath, s->free_slowpath, - (total_alloc - s->alloc_fastpath) * 100 / total_alloc, - s->free_slowpath * 100 / total_free); - printf("Page Alloc %8lu %8lu %3lu %3lu\n", - s->alloc_slab, s->free_slab, - s->alloc_slab * 100 / total_alloc, - s->free_slab * 100 / total_free); - printf("Add partial %8lu %8lu %3lu %3lu\n", - s->deactivate_to_head + s->deactivate_to_tail, - s->free_add_partial, - (s->deactivate_to_head + s->deactivate_to_tail) * 100 / total_alloc, - s->free_add_partial * 100 / total_free); - printf("Remove partial %8lu %8lu %3lu %3lu\n", - s->alloc_from_partial, s->free_remove_partial, - s->alloc_from_partial * 100 / total_alloc, - s->free_remove_partial * 100 / total_free); - - printf("RemoteObj/SlabFrozen %8lu %8lu %3lu %3lu\n", - s->deactivate_remote_frees, s->free_frozen, - s->deactivate_remote_frees * 100 / total_alloc, - s->free_frozen * 100 / total_free); - - printf("Total %8lu %8lu\n\n", total_alloc, total_free); - - if (s->cpuslab_flush) - printf("Flushes %8lu\n", s->cpuslab_flush); - - if (s->alloc_refill) - printf("Refill %8lu\n", s->alloc_refill); - - total = s->deactivate_full + s->deactivate_empty + - s->deactivate_to_head + s->deactivate_to_tail; - - if (total) - printf("Deactivate Full=%lu(%lu%%) Empty=%lu(%lu%%) " - "ToHead=%lu(%lu%%) ToTail=%lu(%lu%%)\n", - s->deactivate_full, (s->deactivate_full * 100) / total, - s->deactivate_empty, (s->deactivate_empty * 100) / total, - s->deactivate_to_head, (s->deactivate_to_head * 100) / total, - s->deactivate_to_tail, (s->deactivate_to_tail * 100) / total); -} - -static void report(struct slabinfo *s) -{ - if (strcmp(s->name, "*") == 0) - return; - - printf("\nSlabcache: %-20s Aliases: %2d Order : %2d Objects: %lu\n", - s->name, s->aliases, s->order, s->objects); - if (s->hwcache_align) - printf("** Hardware cacheline aligned\n"); - if (s->cache_dma) - printf("** Memory is allocated in a special DMA zone\n"); - if (s->destroy_by_rcu) - printf("** Slabs are destroyed via RCU\n"); - if (s->reclaim_account) - printf("** Reclaim accounting active\n"); - - printf("\nSizes (bytes) Slabs Debug Memory\n"); - printf("------------------------------------------------------------------------\n"); - printf("Object : %7d Total : %7ld Sanity Checks : %s Total: %7ld\n", - s->object_size, s->slabs, onoff(s->sanity_checks), - s->slabs * (page_size << s->order)); - printf("SlabObj: %7d Full : %7ld Redzoning : %s Used : %7ld\n", - s->slab_size, s->slabs - s->partial - s->cpu_slabs, - onoff(s->red_zone), s->objects * s->object_size); - printf("SlabSiz: %7d Partial: %7ld Poisoning : %s Loss : %7ld\n", - page_size << s->order, s->partial, onoff(s->poison), - s->slabs * (page_size << s->order) - s->objects * s->object_size); - printf("Loss : %7d CpuSlab: %7d Tracking : %s Lalig: %7ld\n", - s->slab_size - s->object_size, s->cpu_slabs, onoff(s->store_user), - (s->slab_size - s->object_size) * s->objects); - printf("Align : %7d Objects: %7d Tracing : %s Lpadd: %7ld\n", - s->align, s->objs_per_slab, onoff(s->trace), - ((page_size << s->order) - s->objs_per_slab * s->slab_size) * - s->slabs); - - ops(s); - show_tracking(s); - slab_numa(s, 1); - slab_stats(s); -} - -static void slabcache(struct slabinfo *s) -{ - char size_str[20]; - char dist_str[40]; - char flags[20]; - char *p = flags; - - if (strcmp(s->name, "*") == 0) - return; - - if (actual_slabs == 1) { - report(s); - return; - } - - if (skip_zero && !show_empty && !s->slabs) - return; - - if (show_empty && s->slabs) - return; - - store_size(size_str, slab_size(s)); - snprintf(dist_str, 40, "%lu/%lu/%d", s->slabs - s->cpu_slabs, - s->partial, s->cpu_slabs); - - if (!line++) - first_line(); - - if (s->aliases) - *p++ = '*'; - if (s->cache_dma) - *p++ = 'd'; - if (s->hwcache_align) - *p++ = 'A'; - if (s->poison) - *p++ = 'P'; - if (s->reclaim_account) - *p++ = 'a'; - if (s->red_zone) - *p++ = 'Z'; - if (s->sanity_checks) - *p++ = 'F'; - if (s->store_user) - *p++ = 'U'; - if (s->trace) - *p++ = 'T'; - - *p = 0; - if (show_activity) { - unsigned long total_alloc; - unsigned long total_free; - - total_alloc = s->alloc_fastpath + s->alloc_slowpath; - total_free = s->free_fastpath + s->free_slowpath; - - printf("%-21s %8ld %10ld %10ld %3ld %3ld %5ld %1d\n", - s->name, s->objects, - total_alloc, total_free, - total_alloc ? (s->alloc_fastpath * 100 / total_alloc) : 0, - total_free ? (s->free_fastpath * 100 / total_free) : 0, - s->order_fallback, s->order); - } - else - printf("%-21s %8ld %7d %8s %14s %4d %1d %3ld %3ld %s\n", - s->name, s->objects, s->object_size, size_str, dist_str, - s->objs_per_slab, s->order, - s->slabs ? (s->partial * 100) / s->slabs : 100, - s->slabs ? (s->objects * s->object_size * 100) / - (s->slabs * (page_size << s->order)) : 100, - flags); -} - -/* - * Analyze debug options. Return false if something is amiss. - */ -static int debug_opt_scan(char *opt) -{ - if (!opt || !opt[0] || strcmp(opt, "-") == 0) - return 1; - - if (strcasecmp(opt, "a") == 0) { - sanity = 1; - poison = 1; - redzone = 1; - tracking = 1; - return 1; - } - - for ( ; *opt; opt++) - switch (*opt) { - case 'F' : case 'f': - if (sanity) - return 0; - sanity = 1; - break; - case 'P' : case 'p': - if (poison) - return 0; - poison = 1; - break; - - case 'Z' : case 'z': - if (redzone) - return 0; - redzone = 1; - break; - - case 'U' : case 'u': - if (tracking) - return 0; - tracking = 1; - break; - - case 'T' : case 't': - if (tracing) - return 0; - tracing = 1; - break; - default: - return 0; - } - return 1; -} - -static int slab_empty(struct slabinfo *s) -{ - if (s->objects > 0) - return 0; - - /* - * We may still have slabs even if there are no objects. Shrinking will - * remove them. - */ - if (s->slabs != 0) - set_obj(s, "shrink", 1); - - return 1; -} - -static void slab_debug(struct slabinfo *s) -{ - if (strcmp(s->name, "*") == 0) - return; - - if (sanity && !s->sanity_checks) { - set_obj(s, "sanity", 1); - } - if (!sanity && s->sanity_checks) { - if (slab_empty(s)) - set_obj(s, "sanity", 0); - else - fprintf(stderr, "%s not empty cannot disable sanity checks\n", s->name); - } - if (redzone && !s->red_zone) { - if (slab_empty(s)) - set_obj(s, "red_zone", 1); - else - fprintf(stderr, "%s not empty cannot enable redzoning\n", s->name); - } - if (!redzone && s->red_zone) { - if (slab_empty(s)) - set_obj(s, "red_zone", 0); - else - fprintf(stderr, "%s not empty cannot disable redzoning\n", s->name); - } - if (poison && !s->poison) { - if (slab_empty(s)) - set_obj(s, "poison", 1); - else - fprintf(stderr, "%s not empty cannot enable poisoning\n", s->name); - } - if (!poison && s->poison) { - if (slab_empty(s)) - set_obj(s, "poison", 0); - else - fprintf(stderr, "%s not empty cannot disable poisoning\n", s->name); - } - if (tracking && !s->store_user) { - if (slab_empty(s)) - set_obj(s, "store_user", 1); - else - fprintf(stderr, "%s not empty cannot enable tracking\n", s->name); - } - if (!tracking && s->store_user) { - if (slab_empty(s)) - set_obj(s, "store_user", 0); - else - fprintf(stderr, "%s not empty cannot disable tracking\n", s->name); - } - if (tracing && !s->trace) { - if (slabs == 1) - set_obj(s, "trace", 1); - else - fprintf(stderr, "%s can only enable trace for one slab at a time\n", s->name); - } - if (!tracing && s->trace) - set_obj(s, "trace", 1); -} - -static void totals(void) -{ - struct slabinfo *s; - - int used_slabs = 0; - char b1[20], b2[20], b3[20], b4[20]; - unsigned long long max = 1ULL << 63; - - /* Object size */ - unsigned long long min_objsize = max, max_objsize = 0, avg_objsize; - - /* Number of partial slabs in a slabcache */ - unsigned long long min_partial = max, max_partial = 0, - avg_partial, total_partial = 0; - - /* Number of slabs in a slab cache */ - unsigned long long min_slabs = max, max_slabs = 0, - avg_slabs, total_slabs = 0; - - /* Size of the whole slab */ - unsigned long long min_size = max, max_size = 0, - avg_size, total_size = 0; - - /* Bytes used for object storage in a slab */ - unsigned long long min_used = max, max_used = 0, - avg_used, total_used = 0; - - /* Waste: Bytes used for alignment and padding */ - unsigned long long min_waste = max, max_waste = 0, - avg_waste, total_waste = 0; - /* Number of objects in a slab */ - unsigned long long min_objects = max, max_objects = 0, - avg_objects, total_objects = 0; - /* Waste per object */ - unsigned long long min_objwaste = max, - max_objwaste = 0, avg_objwaste, - total_objwaste = 0; - - /* Memory per object */ - unsigned long long min_memobj = max, - max_memobj = 0, avg_memobj, - total_objsize = 0; - - /* Percentage of partial slabs per slab */ - unsigned long min_ppart = 100, max_ppart = 0, - avg_ppart, total_ppart = 0; - - /* Number of objects in partial slabs */ - unsigned long min_partobj = max, max_partobj = 0, - avg_partobj, total_partobj = 0; - - /* Percentage of partial objects of all objects in a slab */ - unsigned long min_ppartobj = 100, max_ppartobj = 0, - avg_ppartobj, total_ppartobj = 0; - - - for (s = slabinfo; s < slabinfo + slabs; s++) { - unsigned long long size; - unsigned long used; - unsigned long long wasted; - unsigned long long objwaste; - unsigned long percentage_partial_slabs; - unsigned long percentage_partial_objs; - - if (!s->slabs || !s->objects) - continue; - - used_slabs++; - - size = slab_size(s); - used = s->objects * s->object_size; - wasted = size - used; - objwaste = s->slab_size - s->object_size; - - percentage_partial_slabs = s->partial * 100 / s->slabs; - if (percentage_partial_slabs > 100) - percentage_partial_slabs = 100; - - percentage_partial_objs = s->objects_partial * 100 - / s->objects; - - if (percentage_partial_objs > 100) - percentage_partial_objs = 100; - - if (s->object_size < min_objsize) - min_objsize = s->object_size; - if (s->partial < min_partial) - min_partial = s->partial; - if (s->slabs < min_slabs) - min_slabs = s->slabs; - if (size < min_size) - min_size = size; - if (wasted < min_waste) - min_waste = wasted; - if (objwaste < min_objwaste) - min_objwaste = objwaste; - if (s->objects < min_objects) - min_objects = s->objects; - if (used < min_used) - min_used = used; - if (s->objects_partial < min_partobj) - min_partobj = s->objects_partial; - if (percentage_partial_slabs < min_ppart) - min_ppart = percentage_partial_slabs; - if (percentage_partial_objs < min_ppartobj) - min_ppartobj = percentage_partial_objs; - if (s->slab_size < min_memobj) - min_memobj = s->slab_size; - - if (s->object_size > max_objsize) - max_objsize = s->object_size; - if (s->partial > max_partial) - max_partial = s->partial; - if (s->slabs > max_slabs) - max_slabs = s->slabs; - if (size > max_size) - max_size = size; - if (wasted > max_waste) - max_waste = wasted; - if (objwaste > max_objwaste) - max_objwaste = objwaste; - if (s->objects > max_objects) - max_objects = s->objects; - if (used > max_used) - max_used = used; - if (s->objects_partial > max_partobj) - max_partobj = s->objects_partial; - if (percentage_partial_slabs > max_ppart) - max_ppart = percentage_partial_slabs; - if (percentage_partial_objs > max_ppartobj) - max_ppartobj = percentage_partial_objs; - if (s->slab_size > max_memobj) - max_memobj = s->slab_size; - - total_partial += s->partial; - total_slabs += s->slabs; - total_size += size; - total_waste += wasted; - - total_objects += s->objects; - total_used += used; - total_partobj += s->objects_partial; - total_ppart += percentage_partial_slabs; - total_ppartobj += percentage_partial_objs; - - total_objwaste += s->objects * objwaste; - total_objsize += s->objects * s->slab_size; - } - - if (!total_objects) { - printf("No objects\n"); - return; - } - if (!used_slabs) { - printf("No slabs\n"); - return; - } - - /* Per slab averages */ - avg_partial = total_partial / used_slabs; - avg_slabs = total_slabs / used_slabs; - avg_size = total_size / used_slabs; - avg_waste = total_waste / used_slabs; - - avg_objects = total_objects / used_slabs; - avg_used = total_used / used_slabs; - avg_partobj = total_partobj / used_slabs; - avg_ppart = total_ppart / used_slabs; - avg_ppartobj = total_ppartobj / used_slabs; - - /* Per object object sizes */ - avg_objsize = total_used / total_objects; - avg_objwaste = total_objwaste / total_objects; - avg_partobj = total_partobj * 100 / total_objects; - avg_memobj = total_objsize / total_objects; - - printf("Slabcache Totals\n"); - printf("----------------\n"); - printf("Slabcaches : %3d Aliases : %3d->%-3d Active: %3d\n", - slabs, aliases, alias_targets, used_slabs); - - store_size(b1, total_size);store_size(b2, total_waste); - store_size(b3, total_waste * 100 / total_used); - printf("Memory used: %6s # Loss : %6s MRatio:%6s%%\n", b1, b2, b3); - - store_size(b1, total_objects);store_size(b2, total_partobj); - store_size(b3, total_partobj * 100 / total_objects); - printf("# Objects : %6s # PartObj: %6s ORatio:%6s%%\n", b1, b2, b3); - - printf("\n"); - printf("Per Cache Average Min Max Total\n"); - printf("---------------------------------------------------------\n"); - - store_size(b1, avg_objects);store_size(b2, min_objects); - store_size(b3, max_objects);store_size(b4, total_objects); - printf("#Objects %10s %10s %10s %10s\n", - b1, b2, b3, b4); - - store_size(b1, avg_slabs);store_size(b2, min_slabs); - store_size(b3, max_slabs);store_size(b4, total_slabs); - printf("#Slabs %10s %10s %10s %10s\n", - b1, b2, b3, b4); - - store_size(b1, avg_partial);store_size(b2, min_partial); - store_size(b3, max_partial);store_size(b4, total_partial); - printf("#PartSlab %10s %10s %10s %10s\n", - b1, b2, b3, b4); - store_size(b1, avg_ppart);store_size(b2, min_ppart); - store_size(b3, max_ppart); - store_size(b4, total_partial * 100 / total_slabs); - printf("%%PartSlab%10s%% %10s%% %10s%% %10s%%\n", - b1, b2, b3, b4); - - store_size(b1, avg_partobj);store_size(b2, min_partobj); - store_size(b3, max_partobj); - store_size(b4, total_partobj); - printf("PartObjs %10s %10s %10s %10s\n", - b1, b2, b3, b4); - - store_size(b1, avg_ppartobj);store_size(b2, min_ppartobj); - store_size(b3, max_ppartobj); - store_size(b4, total_partobj * 100 / total_objects); - printf("%% PartObj%10s%% %10s%% %10s%% %10s%%\n", - b1, b2, b3, b4); - - store_size(b1, avg_size);store_size(b2, min_size); - store_size(b3, max_size);store_size(b4, total_size); - printf("Memory %10s %10s %10s %10s\n", - b1, b2, b3, b4); - - store_size(b1, avg_used);store_size(b2, min_used); - store_size(b3, max_used);store_size(b4, total_used); - printf("Used %10s %10s %10s %10s\n", - b1, b2, b3, b4); - - store_size(b1, avg_waste);store_size(b2, min_waste); - store_size(b3, max_waste);store_size(b4, total_waste); - printf("Loss %10s %10s %10s %10s\n", - b1, b2, b3, b4); - - printf("\n"); - printf("Per Object Average Min Max\n"); - printf("---------------------------------------------\n"); - - store_size(b1, avg_memobj);store_size(b2, min_memobj); - store_size(b3, max_memobj); - printf("Memory %10s %10s %10s\n", - b1, b2, b3); - store_size(b1, avg_objsize);store_size(b2, min_objsize); - store_size(b3, max_objsize); - printf("User %10s %10s %10s\n", - b1, b2, b3); - - store_size(b1, avg_objwaste);store_size(b2, min_objwaste); - store_size(b3, max_objwaste); - printf("Loss %10s %10s %10s\n", - b1, b2, b3); -} - -static void sort_slabs(void) -{ - struct slabinfo *s1,*s2; - - for (s1 = slabinfo; s1 < slabinfo + slabs; s1++) { - for (s2 = s1 + 1; s2 < slabinfo + slabs; s2++) { - int result; - - if (sort_size) - result = slab_size(s1) < slab_size(s2); - else if (sort_active) - result = slab_activity(s1) < slab_activity(s2); - else - result = strcasecmp(s1->name, s2->name); - - if (show_inverted) - result = -result; - - if (result > 0) { - struct slabinfo t; - - memcpy(&t, s1, sizeof(struct slabinfo)); - memcpy(s1, s2, sizeof(struct slabinfo)); - memcpy(s2, &t, sizeof(struct slabinfo)); - } - } - } -} - -static void sort_aliases(void) -{ - struct aliasinfo *a1,*a2; - - for (a1 = aliasinfo; a1 < aliasinfo + aliases; a1++) { - for (a2 = a1 + 1; a2 < aliasinfo + aliases; a2++) { - char *n1, *n2; - - n1 = a1->name; - n2 = a2->name; - if (show_alias && !show_inverted) { - n1 = a1->ref; - n2 = a2->ref; - } - if (strcasecmp(n1, n2) > 0) { - struct aliasinfo t; - - memcpy(&t, a1, sizeof(struct aliasinfo)); - memcpy(a1, a2, sizeof(struct aliasinfo)); - memcpy(a2, &t, sizeof(struct aliasinfo)); - } - } - } -} - -static void link_slabs(void) -{ - struct aliasinfo *a; - struct slabinfo *s; - - for (a = aliasinfo; a < aliasinfo + aliases; a++) { - - for (s = slabinfo; s < slabinfo + slabs; s++) - if (strcmp(a->ref, s->name) == 0) { - a->slab = s; - s->refs++; - break; - } - if (s == slabinfo + slabs) - fatal("Unresolved alias %s\n", a->ref); - } -} - -static void alias(void) -{ - struct aliasinfo *a; - char *active = NULL; - - sort_aliases(); - link_slabs(); - - for(a = aliasinfo; a < aliasinfo + aliases; a++) { - - if (!show_single_ref && a->slab->refs == 1) - continue; - - if (!show_inverted) { - if (active) { - if (strcmp(a->slab->name, active) == 0) { - printf(" %s", a->name); - continue; - } - } - printf("\n%-12s <- %s", a->slab->name, a->name); - active = a->slab->name; - } - else - printf("%-20s -> %s\n", a->name, a->slab->name); - } - if (active) - printf("\n"); -} - - -static void rename_slabs(void) -{ - struct slabinfo *s; - struct aliasinfo *a; - - for (s = slabinfo; s < slabinfo + slabs; s++) { - if (*s->name != ':') - continue; - - if (s->refs > 1 && !show_first_alias) - continue; - - a = find_one_alias(s); - - if (a) - s->name = a->name; - else { - s->name = "*"; - actual_slabs--; - } - } -} - -static int slab_mismatch(char *slab) -{ - return regexec(&pattern, slab, 0, NULL, 0); -} - -static void read_slab_dir(void) -{ - DIR *dir; - struct dirent *de; - struct slabinfo *slab = slabinfo; - struct aliasinfo *alias = aliasinfo; - char *p; - char *t; - int count; - - if (chdir("/sys/kernel/slab") && chdir("/sys/slab")) - fatal("SYSFS support for SLUB not active\n"); - - dir = opendir("."); - while ((de = readdir(dir))) { - if (de->d_name[0] == '.' || - (de->d_name[0] != ':' && slab_mismatch(de->d_name))) - continue; - switch (de->d_type) { - case DT_LNK: - alias->name = strdup(de->d_name); - count = readlink(de->d_name, buffer, sizeof(buffer)); - - if (count < 0) - fatal("Cannot read symlink %s\n", de->d_name); - - buffer[count] = 0; - p = buffer + count; - while (p > buffer && p[-1] != '/') - p--; - alias->ref = strdup(p); - alias++; - break; - case DT_DIR: - if (chdir(de->d_name)) - fatal("Unable to access slab %s\n", slab->name); - slab->name = strdup(de->d_name); - slab->alias = 0; - slab->refs = 0; - slab->aliases = get_obj("aliases"); - slab->align = get_obj("align"); - slab->cache_dma = get_obj("cache_dma"); - slab->cpu_slabs = get_obj("cpu_slabs"); - slab->destroy_by_rcu = get_obj("destroy_by_rcu"); - slab->hwcache_align = get_obj("hwcache_align"); - slab->object_size = get_obj("object_size"); - slab->objects = get_obj("objects"); - slab->objects_partial = get_obj("objects_partial"); - slab->objects_total = get_obj("objects_total"); - slab->objs_per_slab = get_obj("objs_per_slab"); - slab->order = get_obj("order"); - slab->partial = get_obj("partial"); - slab->partial = get_obj_and_str("partial", &t); - decode_numa_list(slab->numa_partial, t); - free(t); - slab->poison = get_obj("poison"); - slab->reclaim_account = get_obj("reclaim_account"); - slab->red_zone = get_obj("red_zone"); - slab->sanity_checks = get_obj("sanity_checks"); - slab->slab_size = get_obj("slab_size"); - slab->slabs = get_obj_and_str("slabs", &t); - decode_numa_list(slab->numa, t); - free(t); - slab->store_user = get_obj("store_user"); - slab->trace = get_obj("trace"); - slab->alloc_fastpath = get_obj("alloc_fastpath"); - slab->alloc_slowpath = get_obj("alloc_slowpath"); - slab->free_fastpath = get_obj("free_fastpath"); - slab->free_slowpath = get_obj("free_slowpath"); - slab->free_frozen= get_obj("free_frozen"); - slab->free_add_partial = get_obj("free_add_partial"); - slab->free_remove_partial = get_obj("free_remove_partial"); - slab->alloc_from_partial = get_obj("alloc_from_partial"); - slab->alloc_slab = get_obj("alloc_slab"); - slab->alloc_refill = get_obj("alloc_refill"); - slab->free_slab = get_obj("free_slab"); - slab->cpuslab_flush = get_obj("cpuslab_flush"); - slab->deactivate_full = get_obj("deactivate_full"); - slab->deactivate_empty = get_obj("deactivate_empty"); - slab->deactivate_to_head = get_obj("deactivate_to_head"); - slab->deactivate_to_tail = get_obj("deactivate_to_tail"); - slab->deactivate_remote_frees = get_obj("deactivate_remote_frees"); - slab->order_fallback = get_obj("order_fallback"); - chdir(".."); - if (slab->name[0] == ':') - alias_targets++; - slab++; - break; - default : - fatal("Unknown file type %lx\n", de->d_type); - } - } - closedir(dir); - slabs = slab - slabinfo; - actual_slabs = slabs; - aliases = alias - aliasinfo; - if (slabs > MAX_SLABS) - fatal("Too many slabs\n"); - if (aliases > MAX_ALIASES) - fatal("Too many aliases\n"); -} - -static void output_slabs(void) -{ - struct slabinfo *slab; - - for (slab = slabinfo; slab < slabinfo + slabs; slab++) { - - if (slab->alias) - continue; - - - if (show_numa) - slab_numa(slab, 0); - else if (show_track) - show_tracking(slab); - else if (validate) - slab_validate(slab); - else if (shrink) - slab_shrink(slab); - else if (set_debug) - slab_debug(slab); - else if (show_ops) - ops(slab); - else if (show_slab) - slabcache(slab); - else if (show_report) - report(slab); - } -} - -struct option opts[] = { - { "aliases", 0, NULL, 'a' }, - { "activity", 0, NULL, 'A' }, - { "debug", 2, NULL, 'd' }, - { "display-activity", 0, NULL, 'D' }, - { "empty", 0, NULL, 'e' }, - { "first-alias", 0, NULL, 'f' }, - { "help", 0, NULL, 'h' }, - { "inverted", 0, NULL, 'i'}, - { "numa", 0, NULL, 'n' }, - { "ops", 0, NULL, 'o' }, - { "report", 0, NULL, 'r' }, - { "shrink", 0, NULL, 's' }, - { "slabs", 0, NULL, 'l' }, - { "track", 0, NULL, 't'}, - { "validate", 0, NULL, 'v' }, - { "zero", 0, NULL, 'z' }, - { "1ref", 0, NULL, '1'}, - { NULL, 0, NULL, 0 } -}; - -int main(int argc, char *argv[]) -{ - int c; - int err; - char *pattern_source; - - page_size = getpagesize(); - - while ((c = getopt_long(argc, argv, "aAd::Defhil1noprstvzTS", - opts, NULL)) != -1) - switch (c) { - case '1': - show_single_ref = 1; - break; - case 'a': - show_alias = 1; - break; - case 'A': - sort_active = 1; - break; - case 'd': - set_debug = 1; - if (!debug_opt_scan(optarg)) - fatal("Invalid debug option '%s'\n", optarg); - break; - case 'D': - show_activity = 1; - break; - case 'e': - show_empty = 1; - break; - case 'f': - show_first_alias = 1; - break; - case 'h': - usage(); - return 0; - case 'i': - show_inverted = 1; - break; - case 'n': - show_numa = 1; - break; - case 'o': - show_ops = 1; - break; - case 'r': - show_report = 1; - break; - case 's': - shrink = 1; - break; - case 'l': - show_slab = 1; - break; - case 't': - show_track = 1; - break; - case 'v': - validate = 1; - break; - case 'z': - skip_zero = 0; - break; - case 'T': - show_totals = 1; - break; - case 'S': - sort_size = 1; - break; - - default: - fatal("%s: Invalid option '%c'\n", argv[0], optopt); - - } - - if (!show_slab && !show_alias && !show_track && !show_report - && !validate && !shrink && !set_debug && !show_ops) - show_slab = 1; - - if (argc > optind) - pattern_source = argv[optind]; - else - pattern_source = ".*"; - - err = regcomp(&pattern, pattern_source, REG_ICASE|REG_NOSUB); - if (err) - fatal("%s: Invalid pattern '%s' code %d\n", - argv[0], pattern_source, err); - read_slab_dir(); - if (show_alias) - alias(); - else - if (show_totals) - totals(); - else { - link_slabs(); - rename_slabs(); - sort_slabs(); - output_slabs(); - } - return 0; -} |