diff options
Diffstat (limited to 'arch/arm/boot/dts/imx6q-apalis-ixora.dts')
| -rw-r--r-- | arch/arm/boot/dts/imx6q-apalis-ixora.dts | 123 |
1 files changed, 0 insertions, 123 deletions
diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts index 5a1b3ce1bfce..25804dd9b175 100644 --- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts +++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts @@ -45,32 +45,6 @@ }; }; - lcd_display: disp0 { - compatible = "fsl,imx-parallel-display"; - #address-cells = <1>; - #size-cells = <0>; - interface-pix-fmt = "rgb24"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ipu1_lcdif>; - status = "okay"; - - port@0 { - reg = <0>; - - lcd_display_in: endpoint { - remote-endpoint = <&ipu1_di1_disp1>; - }; - }; - - port@1 { - reg = <1>; - - lcd_display_out: endpoint { - remote-endpoint = <&lcd_panel_in>; - }; - }; - }; - leds { compatible = "gpio-leds"; @@ -98,22 +72,6 @@ }; }; - panel: panel { - /* - * edt,et057090dhu: EDT 5.7" LCD TFT - * edt,et070080dh6: EDT 7.0" LCD TFT - */ - compatible = "edt,et057090dhu"; - backlight = <&backlight>; - power-supply = <®_3v3_sw>; - - port { - lcd_panel_in: endpoint { - remote-endpoint = <&lcd_display_out>; - }; - }; - }; - reg_3v3_sw: regulator-3v3-sw { compatible = "regulator-fixed"; regulator-name = "3.3V_SW"; @@ -131,14 +89,6 @@ }; }; -&backlight { - brightness-levels = <0 45 63 88 119 158 203 255>; - default-brightness-level = <4>; - power-supply = <®_3v3_sw>; - pwms = <&pwm4 0 6666667 PWM_POLARITY_INVERTED>; - status = "okay"; -}; - &can1 { xceiver-supply = <®_3v3_sw>; status = "okay"; @@ -171,35 +121,10 @@ }; }; -&hdmi_audio { - status = "okay"; -}; - -&hdmi_cec { - status = "okay"; -}; - -&hdmi_core { - status = "okay"; -}; - -&hdmi_video { - status = "okay"; -}; - /* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */ &i2c1 { status = "okay"; - pcap@10 { - /* TouchRevolution Fusion 7 and 10 multi-touch controller */ - compatible = "touchrevolution,fusion-f0710a"; - reg = <0x10>; - gpios = <&gpio6 10 GPIO_ACTIVE_HIGH /* MXM3 11, Pen down interrupt */ - &gpio6 9 GPIO_ACTIVE_HIGH /* MXM3 13, Reset */ - >; - }; - eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>; @@ -273,46 +198,6 @@ }; }; -/* - * DDC_I2C: I2C2_SDA/SCL on MXM3 205/207 - */ -&i2cddc { - status = "okay"; - - hdmi_ddc: edid@50 { - compatible = "fsl,imx6-hdmi-i2c"; - reg = <0x50>; - }; -}; - -&ipu1_di1_disp1 { - remote-endpoint = <&lcd_display_in>; -}; - -&lcd { - status = "okay"; -}; - -&ldb { - status = "okay"; -}; - -&mxcfb1 { - status = "okay"; -}; - -&mxcfb2 { - status = "okay"; -}; - -&mxcfb3 { - status = "okay"; -}; - -&mxcfb4 { - status = "okay"; -}; - &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reset_moci>; @@ -349,10 +234,6 @@ status = "okay"; }; -&sound_hdmi { - status = "okay"; -}; - &sound_spdif { status = "okay"; }; @@ -406,10 +287,6 @@ status = "okay"; }; -&vdac { - status = "okay"; -}; - &iomuxc { /* Mux the Apalis GPIOs */ pinctrl-names = "default"; |