1 files changed, 63 insertions, 3 deletions
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index 926528b81baa..cef9616f330a 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -1,7 +1,16 @@
 /include/ "skeleton.dtsi"
 
 / {
-	compatible = "mrvl,kirkwood";
+	compatible = "marvell,kirkwood";
+	interrupt-parent = <&intc>;
+
+	intc: interrupt-controller {
+		compatible = "marvell,orion-intc", "marvell,intc";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0xf1020204 0x04>,
+		      <0xf1020214 0x04>;
+	};
 
 	ocp@f1000000 {
 		compatible = "simple-bus";
@@ -9,6 +18,24 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 
+		gpio0: gpio@10100 {
+			compatible = "marvell,orion-gpio";
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0x10100 0x40>;
+			ngpio = <32>;
+			interrupts = <35>, <36>, <37>, <38>;
+		};
+
+		gpio1: gpio@10140 {
+			compatible = "marvell,orion-gpio";
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0x10140 0x40>;
+			ngpio = <18>;
+			interrupts = <39>, <40>, <41>;
+		};
+
 		serial@12000 {
 			compatible = "ns16550a";
 			reg = <0x12000 0x100>;
@@ -28,22 +55,55 @@
 		};
 
 		rtc@10300 {
-			compatible = "mrvl,kirkwood-rtc", "mrvl,orion-rtc";
+			compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
 			reg = <0x10300 0x20>;
 			interrupts = <53>;
 		};
 
+		spi@10600 {
+			compatible = "marvell,orion-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			interrupts = <23>;
+			reg = <0x10600 0x28>;
+			status = "disabled";
+		};
+
+		wdt@20300 {
+			compatible = "marvell,orion-wdt";
+			reg = <0x20300 0x28>;
+			status = "okay";
+		};
+
+		sata@80000 {
+			compatible = "marvell,orion-sata";
+			reg = <0x80000 0x5000>;
+			interrupts = <21>;
+			status = "disabled";
+		};
+
 		nand@3000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			cle = <0>;
 			ale = <1>;
 			bank-width = <1>;
-			compatible = "mrvl,orion-nand";
+			compatible = "marvell,orion-nand";
 			reg = <0x3000000 0x400>;
 			chip-delay = <25>;
 			/* set partition map and/or chip-delay in board dts */
 			status = "disabled";
 		};
+
+		i2c@11000 {
+			compatible = "marvell,mv64xxx-i2c";
+			reg = <0x11000 0x20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <29>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
 	};
 };