diff options
Diffstat (limited to 'arch/arm/boot')
59 files changed, 3866 insertions, 216 deletions
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 68c918362b79..76a50ecae1c3 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -81,7 +81,7 @@ ZTEXTADDR := 0 ZBSSADDR := ALIGN(8) endif -SEDFLAGS = s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/ +CPPFLAGS_vmlinux.lds := -DTEXT_START="$(ZTEXTADDR)" -DBSS_START="$(ZBSSADDR)" suffix_$(CONFIG_KERNEL_GZIP) = gzip suffix_$(CONFIG_KERNEL_LZO) = lzo @@ -199,8 +199,5 @@ CFLAGS_font.o := -Dstatic= $(obj)/font.c: $(FONTC) $(call cmd,shipped) -$(obj)/vmlinux.lds: $(obj)/vmlinux.lds.in arch/arm/boot/Makefile $(KCONFIG_CONFIG) - @sed "$(SEDFLAGS)" < $< > $@ - $(obj)/hyp-stub.S: $(srctree)/arch/$(SRCARCH)/kernel/hyp-stub.S $(call cmd,shipped) diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 3a8b32df6b31..413fd94b5301 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -125,9 +125,11 @@ start: THUMB( adr r12, BSYM(1f) ) THUMB( bx r12 ) - .word 0x016f2818 @ Magic numbers to help the loader - .word start @ absolute load/run zImage address - .word _edata @ zImage end address + .word _magic_sig @ Magic numbers to help the loader + .word _magic_start @ absolute load/run zImage address + .word _magic_end @ zImage end address + .word 0x04030201 @ endianness flag + THUMB( .thumb ) 1: ARM_BE8( setend be ) @ go BE8 if compiled for BE8 diff --git a/arch/arm/boot/compressed/vmlinux.lds.in b/arch/arm/boot/compressed/vmlinux.lds.S index 4919f2ac8b89..2b60b843ac5e 100644 --- a/arch/arm/boot/compressed/vmlinux.lds.in +++ b/arch/arm/boot/compressed/vmlinux.lds.S @@ -1,12 +1,20 @@ /* - * linux/arch/arm/boot/compressed/vmlinux.lds.in - * * Copyright (C) 2000 Russell King * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ + +#ifdef CONFIG_CPU_ENDIAN_BE8 +#define ZIMAGE_MAGIC(x) ( (((x) >> 24) & 0x000000ff) | \ + (((x) >> 8) & 0x0000ff00) | \ + (((x) << 8) & 0x00ff0000) | \ + (((x) << 24) & 0xff000000) ) +#else +#define ZIMAGE_MAGIC(x) (x) +#endif + OUTPUT_ARCH(arm) ENTRY(_start) SECTIONS @@ -57,6 +65,10 @@ SECTIONS .pad : { BYTE(0); . = ALIGN(8); } _edata = .; + _magic_sig = ZIMAGE_MAGIC(0x016f2818); + _magic_start = ZIMAGE_MAGIC(_start); + _magic_end = ZIMAGE_MAGIC(_edata); + . = BSS_START; __bss_start = .; .bss : { *(.bss) } @@ -73,4 +85,3 @@ SECTIONS .stab.indexstr 0 : { *(.stab.indexstr) } .comment 0 : { *(.comment) } } - diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 0afe09a6bf51..b8c5cd3ddeb9 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -87,6 +87,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos5440-ssdk5440.dtb \ exynos5800-peach-pi.dtb dtb-$(CONFIG_ARCH_HI3xxx) += hi3620-hi4511.dtb +dtb-$(CONFIG_ARCH_HIX5HD2) += hisi-x5hd2-dkb.dtb dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \ ecx-2000.dtb dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \ @@ -94,8 +95,7 @@ dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \ dtb-$(CONFIG_ARCH_KEYSTONE) += k2hk-evm.dtb \ k2l-evm.dtb \ k2e-evm.dtb -kirkwood := \ - kirkwood-b3.dtb \ +dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-b3.dtb \ kirkwood-cloudbox.dtb \ kirkwood-d2net.dtb \ kirkwood-db-88f6281.dtb \ @@ -157,8 +157,6 @@ kirkwood := \ kirkwood-ts219-6282.dtb \ kirkwood-ts419-6281.dtb \ kirkwood-ts419-6282.dtb -dtb-$(CONFIG_ARCH_KIRKWOOD) += $(kirkwood) -dtb-$(CONFIG_MACH_KIRKWOOD) += $(kirkwood) dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb @@ -354,13 +352,17 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb dtb-$(CONFIG_ARCH_S3C64XX) += s3c6410-mini6410.dtb \ s3c6410-smdk6410.dtb +dtb-$(CONFIG_ARCH_S5PV210) += s5pv210-aquila.dtb \ + s5pv210-goni.dtb \ + s5pv210-smdkc110.dtb \ + s5pv210-smdkv210.dtb \ + s5pv210-torbreck.dtb dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += r7s72100-genmai.dtb \ r8a7740-armadillo800eva.dtb \ r8a7778-bockw.dtb \ r8a7778-bockw-reference.dtb \ r8a7740-armadillo800eva-reference.dtb \ r8a7779-marzen.dtb \ - r8a7779-marzen-reference.dtb \ r8a7791-koelsch.dtb \ r8a7790-lager.dtb \ sh73a0-kzm9g.dtb \ @@ -372,7 +374,8 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d.dtb \ r7s72100-genmai.dtb \ r8a7791-henninger.dtb \ r8a7791-koelsch.dtb \ - r8a7790-lager.dtb + r8a7790-lager.dtb \ + r8a7779-marzen.dtb dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_arria5_socdk.dtb \ socfpga_cyclone5_socdk.dtb \ socfpga_cyclone5_sockit.dtb \ diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 4a4e02d0ce9e..3a0a161342ba 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -347,6 +347,15 @@ status = "disabled"; }; + mailbox: mailbox@480C8000 { + compatible = "ti,omap4-mailbox"; + reg = <0x480C8000 0x200>; + interrupts = <77>; + ti,hwmods = "mailbox"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <8>; + }; + timer1: timer@44e31000 { compatible = "ti,am335x-timer-1ms"; reg = <0x44e31000 0x400>; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 8d3c16304636..9b3d2ba82f13 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -168,9 +168,6 @@ ti,hwmods = "mailbox"; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <8>; - ti,mbox-names = "wkup_m3"; - ti,mbox-data = <0 0 0 0>; - status = "disabled"; }; timer1: timer@44e31000 { diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 6563b983a127..97f603c4483d 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -415,6 +415,123 @@ status = "disabled"; }; + mailbox1: mailbox@4a0f4000 { + compatible = "ti,omap4-mailbox"; + reg = <0x4a0f4000 0x200>; + ti,hwmods = "mailbox1"; + ti,mbox-num-users = <3>; + ti,mbox-num-fifos = <8>; + status = "disabled"; + }; + + mailbox2: mailbox@4883a000 { + compatible = "ti,omap4-mailbox"; + reg = <0x4883a000 0x200>; + ti,hwmods = "mailbox2"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox3: mailbox@4883c000 { + compatible = "ti,omap4-mailbox"; + reg = <0x4883c000 0x200>; + ti,hwmods = "mailbox3"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox4: mailbox@4883e000 { + compatible = "ti,omap4-mailbox"; + reg = <0x4883e000 0x200>; + ti,hwmods = "mailbox4"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox5: mailbox@48840000 { + compatible = "ti,omap4-mailbox"; + reg = <0x48840000 0x200>; + ti,hwmods = "mailbox5"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox6: mailbox@48842000 { + compatible = "ti,omap4-mailbox"; + reg = <0x48842000 0x200>; + ti,hwmods = "mailbox6"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox7: mailbox@48844000 { + compatible = "ti,omap4-mailbox"; + reg = <0x48844000 0x200>; + ti,hwmods = "mailbox7"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox8: mailbox@48846000 { + compatible = "ti,omap4-mailbox"; + reg = <0x48846000 0x200>; + ti,hwmods = "mailbox8"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox9: mailbox@4885e000 { + compatible = "ti,omap4-mailbox"; + reg = <0x4885e000 0x200>; + ti,hwmods = "mailbox9"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox10: mailbox@48860000 { + compatible = "ti,omap4-mailbox"; + reg = <0x48860000 0x200>; + ti,hwmods = "mailbox10"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox11: mailbox@48862000 { + compatible = "ti,omap4-mailbox"; + reg = <0x48862000 0x200>; + ti,hwmods = "mailbox11"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox12: mailbox@48864000 { + compatible = "ti,omap4-mailbox"; + reg = <0x48864000 0x200>; + ti,hwmods = "mailbox12"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox13: mailbox@48802000 { + compatible = "ti,omap4-mailbox"; + reg = <0x48802000 0x200>; + ti,hwmods = "mailbox13"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + timer1: timer@4ae18000 { compatible = "ti,omap5430-timer"; reg = <0x4ae18000 0x80>; diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi index e37985fa10e2..00eeed3721b6 100644 --- a/arch/arm/boot/dts/emev2.dtsi +++ b/arch/arm/boot/dts/emev2.dtsi @@ -31,11 +31,13 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + clock-frequency = <533000000>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; + clock-frequency = <533000000>; }; }; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index abd6eb31b2c2..1d52de6370d5 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -39,6 +39,8 @@ i2c5 = &i2c_5; i2c6 = &i2c_6; i2c7 = &i2c_7; + serial0 = &serial_0; + serial1 = &serial_1; }; cpus { @@ -268,10 +270,11 @@ }; adc: adc@126C0000 { - compatible = "samsung,exynos-adc-v3"; + compatible = "samsung,exynos3250-adc", + "samsung,exynos-adc-v2"; reg = <0x126C0000 0x100>, <0x10020718 0x4>; interrupts = <0 137 0>; - clock-names = "adc", "sclk_tsadc"; + clock-names = "adc", "sclk"; clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>; #io-channel-cells = <1>; io-channel-ranges; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 08ea6dc9a92f..e0278ecbc816 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -44,6 +44,10 @@ fimc1 = &fimc_1; fimc2 = &fimc_2; fimc3 = &fimc_3; + serial0 = &serial_0; + serial1 = &serial_1; + serial2 = &serial_2; + serial3 = &serial_3; }; clock_audss: clock-controller@03810000 { @@ -393,7 +397,7 @@ status = "disabled"; }; - serial@13800000 { + serial_0: serial@13800000 { compatible = "samsung,exynos4210-uart"; reg = <0x13800000 0x100>; interrupts = <0 52 0>; @@ -402,7 +406,7 @@ status = "disabled"; }; - serial@13810000 { + serial_1: serial@13810000 { compatible = "samsung,exynos4210-uart"; reg = <0x13810000 0x100>; interrupts = <0 53 0>; @@ -411,7 +415,7 @@ status = "disabled"; }; - serial@13820000 { + serial_2: serial@13820000 { compatible = "samsung,exynos4210-uart"; reg = <0x13820000 0x100>; interrupts = <0 54 0>; @@ -420,7 +424,7 @@ status = "disabled"; }; - serial@13830000 { + serial_3: serial@13830000 { compatible = "samsung,exynos4210-uart"; reg = <0x13830000 0x100>; interrupts = <0 55 0>; @@ -638,6 +642,7 @@ clocks = <&clock CLK_SCLK_FIMD0>, <&clock CLK_FIMD0>; clock-names = "sclk_fimd", "fimd"; samsung,power-domain = <&pd_lcd0>; + samsung,sysreg = <&sys_reg>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts index 636d16684750..676e6e0c8cf3 100644 --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -168,6 +168,7 @@ }; spi_2: spi@13940000 { + cs-gpios = <&gpc1 2 0>; status = "okay"; w25x80@0 { @@ -178,7 +179,6 @@ spi-max-frequency = <1000000>; controller-data { - cs-gpio = <&gpc1 2 0>; samsung,spi-feedback-delay = <0>; }; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index a4f28e8a6f87..807bb5bf91fc 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -31,6 +31,16 @@ pinctrl2 = &pinctrl_2; }; + pmu_system_controller: system-controller@10020000 { + clock-names = "clkout0", "clkout1", "clkout2", "clkout3", + "clkout4", "clkout8", "clkout9"; + clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>, + <&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>, + <&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, + <&clock CLK_XUSBXTI>; + #clock-cells = <1>; + }; + sysram@02020000 { compatible = "mmio-sram"; reg = <0x02020000 0x20000>; diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 77878447b312..11967f4561e0 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -589,6 +589,7 @@ spi_1: spi@13930000 { pinctrl-names = "default"; pinctrl-0 = <&spi1_bus>; + cs-gpios = <&gpb 5 0>; status = "okay"; s5c73m3_spi: s5c73m3 { @@ -596,7 +597,6 @@ spi-max-frequency = <50000000>; reg = <0>; controller-data { - cs-gpio = <&gpb 5 0>; samsung,spi-feedback-delay = <2>; }; }; diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi index 95cdfb9e7d59..861bb919f6d3 100644 --- a/arch/arm/boot/dts/exynos4x12.dtsi +++ b/arch/arm/boot/dts/exynos4x12.dtsi @@ -133,6 +133,13 @@ pmu_system_controller: system-controller@10020000 { compatible = "samsung,exynos4212-pmu", "syscon"; + clock-names = "clkout0", "clkout1", "clkout2", "clkout3", + "clkout4", "clkout8", "clkout9"; + clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>, + <&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>, + <&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, + <&clock CLK_XUSBXTI>; + #clock-cells = <1>; }; g2d@10800000 { diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi index 79d0608d6dcc..a0cc0b6f8f96 100644 --- a/arch/arm/boot/dts/exynos5.dtsi +++ b/arch/arm/boot/dts/exynos5.dtsi @@ -18,6 +18,13 @@ / { interrupt-parent = <&gic>; + aliases { + serial0 = &serial_0; + serial1 = &serial_1; + serial2 = &serial_2; + serial3 = &serial_3; + }; + chipid@10000000 { compatible = "samsung,exynos4210-chipid"; reg = <0x10000000 0x100>; @@ -50,25 +57,25 @@ interrupts = <1 9 0xf04>; }; - serial@12C00000 { + serial_0: serial@12C00000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C00000 0x100>; interrupts = <0 51 0>; }; - serial@12C10000 { + serial_1: serial@12C10000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C10000 0x100>; interrupts = <0 52 0>; }; - serial@12C20000 { + serial_2: serial@12C20000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C20000 0x100>; interrupts = <0 53 0>; }; - serial@12C30000 { + serial_3: serial@12C30000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C30000 0x100>; interrupts = <0 54 0>; @@ -87,6 +94,7 @@ reg = <0x14400000 0x40000>; interrupt-names = "fifo", "vsync", "lcd_sys"; interrupts = <18 4>, <18 5>, <18 6>; + samsung,sysreg = <&sysreg_system_controller>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index aaa055ac0fe3..b4b35adae565 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -318,6 +318,7 @@ }; spi_1: spi@12d30000 { + cs-gpios = <&gpa2 5 0>; status = "okay"; w25q80bw@0 { @@ -328,7 +329,6 @@ spi-max-frequency = <1000000>; controller-data { - cs-gpio = <&gpa2 5 0>; samsung,spi-feedback-delay = <0>; }; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 834fb5a5306f..492e1eff37bd 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -191,6 +191,9 @@ pmu_system_controller: system-controller@10040000 { compatible = "samsung,exynos5250-pmu", "syscon"; reg = <0x10040000 0x5000>; + clock-names = "clkout16"; + clocks = <&clock CLK_FIN_PLL>; + #clock-cells = <1>; }; sysreg_system_controller: syscon@10050000 { diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi index 4f2fabeecb0e..36da38e29000 100644 --- a/arch/arm/boot/dts/exynos5260.dtsi +++ b/arch/arm/boot/dts/exynos5260.dtsi @@ -21,6 +21,10 @@ pinctrl0 = &pinctrl_0; pinctrl1 = &pinctrl_1; pinctrl2 = &pinctrl_2; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; }; cpus { diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi index 790d4886d7b5..731eefd23fa9 100644 --- a/arch/arm/boot/dts/exynos5410.dtsi +++ b/arch/arm/boot/dts/exynos5410.dtsi @@ -20,6 +20,12 @@ compatible = "samsung,exynos5410", "samsung,exynos5"; interrupt-parent = <&gic>; + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + }; + cpus { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index b69de2661011..95ec37dff3e8 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -515,6 +515,26 @@ phy-names = "dp"; }; + mipi_phy: video-phy@10040714 { + compatible = "samsung,s5pv210-mipi-video-phy"; + reg = <0x10040714 12>; + #phy-cells = <1>; + }; + + dsi@14500000 { + compatible = "samsung,exynos5410-mipi-dsi"; + reg = <0x14500000 0x10000>; + interrupts = <0 82 0>; + samsung,power-domain = <&disp_pd>; + phys = <&mipi_phy 1>; + phy-names = "dsim"; + clocks = <&clock CLK_DSIM1>, <&clock CLK_SCLK_MIPI1>; + clock-names = "bus_clk", "pll_clk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + fimd: fimd@14400000 { clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>; clock-names = "sclk_fimd", "fimd"; @@ -721,6 +741,9 @@ pmu_system_controller: system-controller@10040000 { compatible = "samsung,exynos5420-pmu", "syscon"; reg = <0x10040000 0x5000>; + clock-names = "clkout16"; + clocks = <&clock CLK_FIN_PLL>; + #clock-cells = <1>; }; sysreg_system_controller: syscon@10050000 { diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index ae3a17c791f6..8f3373cd7b87 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -18,6 +18,8 @@ interrupt-parent = <&gic>; aliases { + serial0 = &serial_0; + serial1 = &serial_1; spi0 = &spi_0; tmuctrl0 = &tmuctrl_0; tmuctrl1 = &tmuctrl_1; @@ -102,7 +104,7 @@ >; }; - serial@B0000 { + serial_0: serial@B0000 { compatible = "samsung,exynos4210-uart"; reg = <0xB0000 0x1000>; interrupts = <0 2 0>; @@ -110,7 +112,7 @@ clock-names = "uart", "clk_uart_baud0"; }; - serial@C0000 { + serial_1: serial@C0000 { compatible = "samsung,exynos4210-uart"; reg = <0xC0000 0x1000>; interrupts = <0 3 0>; diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi index ab1116d086be..6cbb62e5c6a9 100644 --- a/arch/arm/boot/dts/hi3620.dtsi +++ b/arch/arm/boot/dts/hi3620.dtsi @@ -33,6 +33,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "hisilicon,hi3620-smp"; cpu@0 { device_type = "cpu"; @@ -73,7 +74,7 @@ L2: l2-cache { compatible = "arm,pl310-cache"; - reg = <0xfc10000 0x100000>; + reg = <0x100000 0x100000>; interrupts = <0 15 4>; cache-unified; cache-level = <2>; diff --git a/arch/arm/boot/dts/hisi-x5hd2-dkb.dts b/arch/arm/boot/dts/hisi-x5hd2-dkb.dts new file mode 100644 index 000000000000..05b44c272c9a --- /dev/null +++ b/arch/arm/boot/dts/hisi-x5hd2-dkb.dts @@ -0,0 +1,53 @@ +/* + * Copyright (c) 2013-2014 Linaro Ltd. + * Copyright (c) 2013-2014 Hisilicon Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ + +/dts-v1/; +#include "hisi-x5hd2.dtsi" + +/ { + model = "Hisilicon HIX5HD2 Development Board"; + compatible = "hisilicon,hix5hd2"; + + chosen { + bootargs = "console=ttyAMA0,115200 earlyprintk"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "hisilicon,hix5hd2-smp"; + + cpu@0 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <0>; + next-level-cache = <&l2>; + }; + + cpu@1 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <1>; + next-level-cache = <&l2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x80000000>; + }; +}; + +&timer0 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi new file mode 100644 index 000000000000..f85ba2924ff7 --- /dev/null +++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi @@ -0,0 +1,170 @@ +/* + * Copyright (c) 2013-2014 Linaro Ltd. + * Copyright (c) 2013-2014 Hisilicon Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ + +#include "skeleton.dtsi" +#include <dt-bindings/clock/hix5hd2-clock.h> + +/ { + aliases { + serial0 = &uart0; + }; + + gic: interrupt-controller@f8a01000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + /* gic dist base, gic cpu base */ + reg = <0xf8a01000 0x1000>, <0xf8a00100 0x100>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges = <0 0xf8000000 0x8000000>; + + amba { + #address-cells = <1>; + #size-cells = <1>; + compatible = "arm,amba-bus"; + ranges; + + timer0: timer@00002000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x00002000 0x1000>; + /* timer00 & timer01 */ + interrupts = <0 24 4>; + clocks = <&clock HIX5HD2_FIXED_24M>; + status = "disabled"; + }; + + timer1: timer@00a29000 { + /* + * Only used in NORMAL state, not available ins + * SLOW or DOZE state. + * The rate is fixed in 24MHz. + */ + compatible = "arm,sp804", "arm,primecell"; + reg = <0x00a29000 0x1000>; + /* timer10 & timer11 */ + interrupts = <0 25 4>; + clocks = <&clock HIX5HD2_FIXED_24M>; + status = "disabled"; + }; + + timer2: timer@00a2a000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x00a2a000 0x1000>; + /* timer20 & timer21 */ + interrupts = <0 26 4>; + clocks = <&clock HIX5HD2_FIXED_24M>; + status = "disabled"; + }; + + timer3: timer@00a2b000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x00a2b000 0x1000>; + /* timer30 & timer31 */ + interrupts = <0 27 4>; + clocks = <&clock HIX5HD2_FIXED_24M>; + status = "disabled"; + }; + + timer4: timer@00a81000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x00a81000 0x1000>; + /* timer30 & timer31 */ + interrupts = <0 28 4>; + clocks = <&clock HIX5HD2_FIXED_24M>; + status = "disabled"; + }; + + uart0: uart@00b00000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x00b00000 0x1000>; + interrupts = <0 49 4>; + clocks = <&clock HIX5HD2_FIXED_83M>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + uart1: uart@00006000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x00006000 0x1000>; + interrupts = <0 50 4>; + clocks = <&clock HIX5HD2_FIXED_83M>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + uart2: uart@00b02000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x00b02000 0x1000>; + interrupts = <0 51 4>; + clocks = <&clock HIX5HD2_FIXED_83M>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + uart3: uart@00b03000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x00b03000 0x1000>; + interrupts = <0 52 4>; + clocks = <&clock HIX5HD2_FIXED_83M>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + uart4: uart@00b04000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xb04000 0x1000>; + interrupts = <0 53 4>; + clocks = <&clock HIX5HD2_FIXED_83M>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + }; + + local_timer@00a00600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x00a00600 0x20>; + interrupts = <1 13 0xf01>; + }; + + l2: l2-cache { + compatible = "arm,pl310-cache"; + reg = <0x00a10000 0x100000>; + interrupts = <0 15 4>; + cache-unified; + cache-level = <2>; + }; + + sysctrl: system-controller@00000000 { + compatible = "hisilicon,sysctrl"; + reg = <0x00000000 0x1000>; + reboot-offset = <0x4>; + }; + + cpuctrl@00a22000 { + compatible = "hisilicon,cpuctrl"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x00a22000 0x2000>; + ranges = <0 0x00a22000 0x2000>; + + clock: clock@0 { + compatible = "hisilicon,hix5hd2-clock"; + reg = <0 0x2000>; + #clock-cells = <1>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx27-pinfunc.h b/arch/arm/boot/dts/imx27-pinfunc.h index f5387b4de577..597bb5f74dcc 100644 --- a/arch/arm/boot/dts/imx27-pinfunc.h +++ b/arch/arm/boot/dts/imx27-pinfunc.h @@ -101,14 +101,6 @@ #define MX27_PAD_CONTRAST__GPIO1_30 0x1e 0x032 #define MX27_PAD_OE_ACD__OE_ACD 0x1f 0x004 #define MX27_PAD_OE_ACD__GPIO1_31 0x1f 0x032 -#define MX27_PAD_UNUSED0__UNUSED0 0x20 0x004 -#define MX27_PAD_UNUSED0__GPIO2_0 0x20 0x032 -#define MX27_PAD_UNUSED1__UNUSED1 0x21 0x004 -#define MX27_PAD_UNUSED1__GPIO2_1 0x21 0x032 -#define MX27_PAD_UNUSED2__UNUSED2 0x22 0x004 -#define MX27_PAD_UNUSED2__GPIO2_2 0x22 0x032 -#define MX27_PAD_UNUSED3__UNUSED3 0x23 0x004 -#define MX27_PAD_UNUSED3__GPIO2_3 0x23 0x032 #define MX27_PAD_SD2_D0__SD2_D0 0x24 0x004 #define MX27_PAD_SD2_D0__MSHC_DATA0 0x24 0x005 #define MX27_PAD_SD2_D0__GPIO2_4 0x24 0x032 @@ -183,16 +175,6 @@ #define MX27_PAD_USBH1_RXDP__USBH1_RXDP 0x3f 0x004 #define MX27_PAD_USBH1_RXDP__UART4_RXD 0x3f 0x001 #define MX27_PAD_USBH1_RXDP__GPIO2_31 0x3f 0x032 -#define MX27_PAD_UNUSED4__UNUSED4 0x40 0x004 -#define MX27_PAD_UNUSED4__GPIO3_0 0x40 0x032 -#define MX27_PAD_UNUSED5__UNUSED5 0x41 0x004 -#define MX27_PAD_UNUSED5__GPIO3_1 0x41 0x032 -#define MX27_PAD_UNUSED6__UNUSED6 0x42 0x004 -#define MX27_PAD_UNUSED6__GPIO3_2 0x42 0x032 -#define MX27_PAD_UNUSED7__UNUSED7 0x43 0x004 -#define MX27_PAD_UNUSED7__GPIO3_3 0x43 0x032 -#define MX27_PAD_UNUSED8__UNUSED8 0x44 0x004 -#define MX27_PAD_UNUSED8__GPIO3_4 0x44 0x032 #define MX27_PAD_I2C2_SDA__I2C2_SDA 0x45 0x004 #define MX27_PAD_I2C2_SDA__GPIO3_5 0x45 0x032 #define MX27_PAD_I2C2_SCL__I2C2_SCL 0x46 0x004 @@ -422,18 +404,6 @@ #define MX27_PAD_USBOTG_CLK__GPIO5_24 0x98 0x032 #define MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x99 0x004 #define MX27_PAD_USBOTG_DATA7__GPIO5_25 0x99 0x032 -#define MX27_PAD_UNUSED9__UNUSED9 0x9a 0x004 -#define MX27_PAD_UNUSED9__GPIO5_26 0x9a 0x032 -#define MX27_PAD_UNUSED10__UNUSED10 0x9b 0x004 -#define MX27_PAD_UNUSED10__GPIO5_27 0x9b 0x032 -#define MX27_PAD_UNUSED11__UNUSED11 0x9c 0x004 -#define MX27_PAD_UNUSED11__GPIO5_28 0x9c 0x032 -#define MX27_PAD_UNUSED12__UNUSED12 0x9d 0x004 -#define MX27_PAD_UNUSED12__GPIO5_29 0x9d 0x032 -#define MX27_PAD_UNUSED13__UNUSED13 0x9e 0x004 -#define MX27_PAD_UNUSED13__GPIO5_30 0x9e 0x032 -#define MX27_PAD_UNUSED14__UNUSED14 0x9f 0x004 -#define MX27_PAD_UNUSED14__GPIO5_31 0x9f 0x032 #define MX27_PAD_NFRB__NFRB 0xa0 0x000 #define MX27_PAD_NFRB__ETMTRACEPKT3 0xa0 0x005 #define MX27_PAD_NFRB__GPIO6_0 0xa0 0x032 @@ -506,21 +476,5 @@ #define MX27_PAD_ATA_DATA15__ETMTRACEPKT4 0xb7 0x005 #define MX27_PAD_ATA_DATA15__FEC_TX_EN 0xb7 0x006 #define MX27_PAD_ATA_DATA15__GPIO6_23 0xb7 0x032 -#define MX27_PAD_UNUSED15__UNUSED15 0xb8 0x004 -#define MX27_PAD_UNUSED15__GPIO6_24 0xb8 0x032 -#define MX27_PAD_UNUSED16__UNUSED16 0xb9 0x004 -#define MX27_PAD_UNUSED16__GPIO6_25 0xb9 0x032 -#define MX27_PAD_UNUSED17__UNUSED17 0xba 0x004 -#define MX27_PAD_UNUSED17__GPIO6_26 0xba 0x032 -#define MX27_PAD_UNUSED18__UNUSED18 0xbb 0x004 -#define MX27_PAD_UNUSED18__GPIO6_27 0xbb 0x032 -#define MX27_PAD_UNUSED19__UNUSED19 0xbc 0x004 -#define MX27_PAD_UNUSED19__GPIO6_28 0xbc 0x032 -#define MX27_PAD_UNUSED20__UNUSED20 0xbd 0x004 -#define MX27_PAD_UNUSED20__GPIO6_29 0xbd 0x032 -#define MX27_PAD_UNUSED21__UNUSED21 0xbe 0x004 -#define MX27_PAD_UNUSED21__GPIO6_30 0xbe 0x032 -#define MX27_PAD_UNUSED22__UNUSED22 0xbf 0x004 -#define MX27_PAD_UNUSED22__GPIO6_31 0xbf 0x032 #endif /* __DTS_IMX27_PINFUNC_H */ diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts index b10e6351da53..cf06e32ee108 100644 --- a/arch/arm/boot/dts/integratorap.dts +++ b/arch/arm/boot/dts/integratorap.dts @@ -8,6 +8,7 @@ / { model = "ARM Integrator/AP"; compatible = "arm,integrator-ap"; + dma-ranges = <0x80000000 0x0 0x80000000>; aliases { arm,timer-primary = &timer2; diff --git a/arch/arm/boot/dts/mt6589-aquaris5.dts b/arch/arm/boot/dts/mt6589-aquaris5.dts new file mode 100644 index 000000000000..443b4467de15 --- /dev/null +++ b/arch/arm/boot/dts/mt6589-aquaris5.dts @@ -0,0 +1,25 @@ +/* + * Copyright (c) 2014 MundoReader S.L. + * Author: Matthias Brugger <matthias.bgg@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; +#include "mt6589.dtsi" + +/ { + model = "bq Aquaris5"; + + memory { + reg = <0x80000000 0x40000000>; + }; +}; diff --git a/arch/arm/boot/dts/mt6589.dtsi b/arch/arm/boot/dts/mt6589.dtsi new file mode 100644 index 000000000000..d0297a051549 --- /dev/null +++ b/arch/arm/boot/dts/mt6589.dtsi @@ -0,0 +1,94 @@ +/* + * Copyright (c) 2014 MundoReader S.L. + * Author: Matthias Brugger <matthias.bgg@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include "skeleton.dtsi" + +/ { + compatible = "mediatek,mt6589"; + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x1>; + }; + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x2>; + }; + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x3>; + }; + + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + + system_clk: dummy13m { + compatible = "fixed-clock"; + clock-frequency = <13000000>; + #clock-cells = <0>; + }; + + rtc_clk: dummy32k { + compatible = "fixed-clock"; + clock-frequency = <32000>; + #clock-cells = <0>; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + + timer: timer@10008000 { + compatible = "mediatek,mt6577-timer"; + reg = <0x10008000 0x80>; + interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>; + clocks = <&system_clk>, <&rtc_clk>; + clock-names = "system-clk", "rtc-clk"; + }; + + gic: interrupt-controller@10212000 { + compatible = "arm,cortex-a15-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x10211000 0x1000>, + <0x10212000 0x1000>, + <0x10214000 0x2000>, + <0x10216000 0x2000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi index 2ad3e3b29411..9be3c1266378 100644 --- a/arch/arm/boot/dts/omap2420.dtsi +++ b/arch/arm/boot/dts/omap2420.dtsi @@ -157,6 +157,8 @@ interrupts = <26>, <34>; interrupt-names = "dsp", "iva"; ti,hwmods = "mailbox"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <6>; }; timer1: timer@48028000 { diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi index f9ab99d5c951..1a00f15d9096 100644 --- a/arch/arm/boot/dts/omap2430.dtsi +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -247,6 +247,8 @@ reg = <0x48094000 0x200>; interrupts = <26>; ti,hwmods = "mailbox"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <6>; }; timer1: timer@49018000 { diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 1fe45d1f75ec..b15f1a77d684 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -353,7 +353,7 @@ }; twl_power: power { - compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off"; + compatible = "ti,twl4030-power-n900"; ti,use_poweroff; }; }; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index b2891a9a6975..575a49bf968d 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -332,6 +332,8 @@ ti,hwmods = "mailbox"; reg = <0x48094000 0x200>; interrupts = <26>; + ti,mbox-num-users = <2>; + ti,mbox-num-fifos = <2>; }; mcspi1: spi@48098000 { diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 7e26d222bfe3..69408b53200d 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -649,6 +649,15 @@ }; }; + mailbox: mailbox@4a0f4000 { + compatible = "ti,omap4-mailbox"; + reg = <0x4a0f4000 0x200>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "mailbox"; + ti,mbox-num-users = <3>; + ti,mbox-num-fifos = <8>; + }; + timer1: timer@4a318000 { compatible = "ti,omap3430-timer"; reg = <0x4a318000 0x80>; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index a4ed54988866..fc8df1739f39 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -640,6 +640,8 @@ reg = <0x4a0f4000 0x200>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "mailbox"; + ti,mbox-num-users = <3>; + ti,mbox-num-fifos = <8>; }; timer1: timer@4ae18000 { @@ -985,6 +987,66 @@ dma-names = "audio_tx"; }; }; + + abb_mpu: regulator-abb-mpu { + compatible = "ti,abb-v2"; + regulator-name = "abb_mpu"; + #address-cells = <0>; + #size-cells = <0>; + clocks = <&sys_clkin>; + ti,settling-time = <50>; + ti,clock-cycles = <16>; + + reg = <0x4ae07cdc 0x8>, <0x4ae06014 0x4>, + <0x4a0021c4 0x8>, <0x4ae0c318 0x4>; + reg-names = "base-address", "int-address", + "efuse-address", "ldo-address"; + ti,tranxdone-status-mask = <0x80>; + /* LDOVBBMPU_MUX_CTRL */ + ti,ldovbb-override-mask = <0x400>; + /* LDOVBBMPU_VSET_OUT */ + ti,ldovbb-vset-mask = <0x1F>; + + /* + * NOTE: only FBB mode used but actual vset will + * determine final biasing + */ + ti,abb_info = < + /*uV ABB efuse rbb_m fbb_m vset_m*/ + 1060000 0 0x0 0 0x02000000 0x01F00000 + 1250000 0 0x4 0 0x02000000 0x01F00000 + >; + }; + + abb_mm: regulator-abb-mm { + compatible = "ti,abb-v2"; + regulator-name = "abb_mm"; + #address-cells = <0>; + #size-cells = <0>; + clocks = <&sys_clkin>; + ti,settling-time = <50>; + ti,clock-cycles = <16>; + + reg = <0x4ae07ce4 0x8>, <0x4ae06010 0x4>, + <0x4a0021a4 0x8>, <0x4ae0c314 0x4>; + reg-names = "base-address", "int-address", + "efuse-address", "ldo-address"; + ti,tranxdone-status-mask = <0x80000000>; + /* LDOVBBMM_MUX_CTRL */ + ti,ldovbb-override-mask = <0x400>; + /* LDOVBBMM_VSET_OUT */ + ti,ldovbb-vset-mask = <0x1F>; + + /* + * NOTE: only FBB mode used but actual vset will + * determine final biasing + */ + ti,abb_info = < + /*uV ABB efuse rbb_m fbb_m vset_m*/ + 1025000 0 0x0 0 0x02000000 0x01F00000 + 1120000 0 0x4 0 0x02000000 0x01F00000 + >; + }; }; }; diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi index f50fbc8f3bd9..bdee22541189 100644 --- a/arch/arm/boot/dts/r7s72100.dtsi +++ b/arch/arm/boot/dts/r7s72100.dtsi @@ -144,6 +144,7 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + clock-frequency = <400000000>; }; }; diff --git a/arch/arm/boot/dts/r8a7779-marzen-reference.dts b/arch/arm/boot/dts/r8a7779-marzen-reference.dts deleted file mode 100644 index b27c6373ff4d..000000000000 --- a/arch/arm/boot/dts/r8a7779-marzen-reference.dts +++ /dev/null @@ -1,121 +0,0 @@ -/* - * Reference Device Tree Source for the Marzen board - * - * Copyright (C) 2013 Renesas Solutions Corp. - * Copyright (C) 2013 Simon Horman - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -/dts-v1/; -#include "r8a7779.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/interrupt-controller/irq.h> - -/ { - model = "marzen"; - compatible = "renesas,marzen-reference", "renesas,r8a7779"; - - chosen { - bootargs = "console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel root=/dev/nfs ip=on rw"; - }; - - memory { - device_type = "memory"; - reg = <0x60000000 0x40000000>; - }; - - fixedregulator3v3: fixedregulator@0 { - compatible = "regulator-fixed"; - regulator-name = "fixed-3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - lan0@18000000 { - compatible = "smsc,lan9220", "smsc,lan9115"; - reg = <0x18000000 0x100>; - pinctrl-0 = <&lan0_pins>; - pinctrl-names = "default"; - - phy-mode = "mii"; - interrupt-parent = <&irqpin0>; - interrupts = <1 IRQ_TYPE_EDGE_FALLING>; - smsc,irq-push-pull; - reg-io-width = <4>; - vddvario-supply = <&fixedregulator3v3>; - vdd33a-supply = <&fixedregulator3v3>; - }; - - leds { - compatible = "gpio-leds"; - led2 { - gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>; - }; - led3 { - gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; - }; - led4 { - gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&irqpin0 { - status = "okay"; -}; - -&pfc { - pinctrl-0 = <&scif2_pins &scif4_pins>; - pinctrl-names = "default"; - - lan0_pins: lan0 { - intc { - renesas,groups = "intc_irq1_b"; - renesas,function = "intc"; - }; - lbsc { - renesas,groups = "lbsc_ex_cs0"; - renesas,function = "lbsc"; - }; - }; - - scif2_pins: serial2 { - renesas,groups = "scif2_data_c"; - renesas,function = "scif2"; - }; - - scif4_pins: serial4 { - renesas,groups = "scif4_data"; - renesas,function = "scif4"; - }; - - sdhi0_pins: sd0 { - renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd"; - renesas,function = "sdhi0"; - }; - - hspi0_pins: hspi0 { - renesas,groups = "hspi0"; - renesas,function = "hspi0"; - }; -}; - -&sdhi0 { - pinctrl-0 = <&sdhi0_pins>; - pinctrl-names = "default"; - - vmmc-supply = <&fixedregulator3v3>; - bus-width = <4>; - status = "okay"; -}; - -&hspi0 { - pinctrl-0 = <&hspi0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts index ee2338838b3f..5745555df943 100644 --- a/arch/arm/boot/dts/r8a7779-marzen.dts +++ b/arch/arm/boot/dts/r8a7779-marzen.dts @@ -11,11 +11,18 @@ /dts-v1/; #include "r8a7779.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> / { model = "marzen"; compatible = "renesas,marzen", "renesas,r8a7779"; + aliases { + serial2 = &scif2; + serial4 = &scif4; + }; + chosen { bootargs = "console=ttySC2,115200 ignore_loglevel root=/dev/nfs ip=on"; }; @@ -24,4 +31,111 @@ device_type = "memory"; reg = <0x60000000 0x40000000>; }; + + fixedregulator3v3: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + lan0@18000000 { + compatible = "smsc,lan9220", "smsc,lan9115"; + reg = <0x18000000 0x100>; + pinctrl-0 = <&lan0_pins>; + pinctrl-names = "default"; + + phy-mode = "mii"; + interrupt-parent = <&irqpin0>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + smsc,irq-push-pull; + reg-io-width = <4>; + vddvario-supply = <&fixedregulator3v3>; + vdd33a-supply = <&fixedregulator3v3>; + }; + + leds { + compatible = "gpio-leds"; + led2 { + gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>; + }; + led3 { + gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; + }; + led4 { + gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&irqpin0 { + status = "okay"; +}; + +&extal_clk { + clock-frequency = <31250000>; +}; + +&pfc { + lan0_pins: lan0 { + intc { + renesas,groups = "intc_irq1_b"; + renesas,function = "intc"; + }; + lbsc { + renesas,groups = "lbsc_ex_cs0"; + renesas,function = "lbsc"; + }; + }; + + scif2_pins: serial2 { + renesas,groups = "scif2_data_c"; + renesas,function = "scif2"; + }; + + scif4_pins: serial4 { + renesas,groups = "scif4_data"; + renesas,function = "scif4"; + }; + + sdhi0_pins: sd0 { + renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd"; + renesas,function = "sdhi0"; + }; + + hspi0_pins: hspi0 { + renesas,groups = "hspi0"; + renesas,function = "hspi0"; + }; +}; + +&scif2 { + pinctrl-0 = <&scif2_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&scif4 { + pinctrl-0 = <&scif4_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&fixedregulator3v3>; + bus-width = <4>; + status = "okay"; +}; + +&hspi0 { + pinctrl-0 = <&hspi0_pins>; + pinctrl-names = "default"; + status = "okay"; }; diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index 13bf08ac6011..58d0d952d60e 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -11,6 +11,7 @@ /include/ "skeleton.dtsi" +#include <dt-bindings/clock/r8a7779-clock.h> #include <dt-bindings/interrupt-controller/irq.h> / { @@ -25,21 +26,25 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + clock-frequency = <1000000000>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; + clock-frequency = <1000000000>; }; cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <2>; + clock-frequency = <1000000000>; }; cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <3>; + clock-frequency = <1000000000>; }; }; @@ -157,6 +162,7 @@ compatible = "renesas,i2c-r8a7779"; reg = <0xffc70000 0x1000>; interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7779_CLK_I2C0>; status = "disabled"; }; @@ -166,6 +172,7 @@ compatible = "renesas,i2c-r8a7779"; reg = <0xffc71000 0x1000>; interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7779_CLK_I2C1>; status = "disabled"; }; @@ -175,6 +182,7 @@ compatible = "renesas,i2c-r8a7779"; reg = <0xffc72000 0x1000>; interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7779_CLK_I2C2>; status = "disabled"; }; @@ -184,6 +192,67 @@ compatible = "renesas,i2c-r8a7779"; reg = <0xffc73000 0x1000>; interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7779_CLK_I2C3>; + status = "disabled"; + }; + + scif0: serial@ffe40000 { + compatible = "renesas,scif-r8a7779", "renesas,scif"; + reg = <0xffe40000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg_clocks R8A7779_CLK_P>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif1: serial@ffe41000 { + compatible = "renesas,scif-r8a7779", "renesas,scif"; + reg = <0xffe41000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg_clocks R8A7779_CLK_P>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif2: serial@ffe42000 { + compatible = "renesas,scif-r8a7779", "renesas,scif"; + reg = <0xffe42000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg_clocks R8A7779_CLK_P>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif3: serial@ffe43000 { + compatible = "renesas,scif-r8a7779", "renesas,scif"; + reg = <0xffe43000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg_clocks R8A7779_CLK_P>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif4: serial@ffe44000 { + compatible = "renesas,scif-r8a7779", "renesas,scif"; + reg = <0xffe44000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg_clocks R8A7779_CLK_P>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif5: serial@ffe45000 { + compatible = "renesas,scif-r8a7779", "renesas,scif"; + reg = <0xffe45000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg_clocks R8A7779_CLK_P>; + clock-names = "sci_ick"; status = "disabled"; }; @@ -201,12 +270,14 @@ compatible = "renesas,rcar-sata"; reg = <0xfc600000 0x2000>; interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp1_clks R8A7779_CLK_SATA>; }; sdhi0: sd@ffe4c000 { compatible = "renesas,sdhi-r8a7779"; reg = <0xffe4c000 0x100>; interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7779_CLK_SDHI0>; cap-sd-highspeed; cap-sdio-irq; status = "disabled"; @@ -216,6 +287,7 @@ compatible = "renesas,sdhi-r8a7779"; reg = <0xffe4d000 0x100>; interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7779_CLK_SDHI1>; cap-sd-highspeed; cap-sdio-irq; status = "disabled"; @@ -225,6 +297,7 @@ compatible = "renesas,sdhi-r8a7779"; reg = <0xffe4e000 0x100>; interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7779_CLK_SDHI2>; cap-sd-highspeed; cap-sdio-irq; status = "disabled"; @@ -234,6 +307,7 @@ compatible = "renesas,sdhi-r8a7779"; reg = <0xffe4f000 0x100>; interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7779_CLK_SDHI3>; cap-sd-highspeed; cap-sdio-irq; status = "disabled"; @@ -245,6 +319,7 @@ interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + clocks = <&mstp0_clks R8A7779_CLK_HSPI>; status = "disabled"; }; @@ -254,6 +329,7 @@ interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + clocks = <&mstp0_clks R8A7779_CLK_HSPI>; status = "disabled"; }; @@ -263,6 +339,150 @@ interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + clocks = <&mstp0_clks R8A7779_CLK_HSPI>; status = "disabled"; }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* External root clock */ + extal_clk: extal_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overriden by the board. */ + clock-frequency = <0>; + clock-output-names = "extal"; + }; + + /* Special CPG clocks */ + cpg_clocks: clocks@ffc80000 { + compatible = "renesas,r8a7779-cpg-clocks"; + reg = <0xffc80000 0x30>; + clocks = <&extal_clk>; + #clock-cells = <1>; + clock-output-names = "plla", "z", "zs", "s", + "s1", "p", "b", "out"; + }; + + /* Fixed factor clocks */ + i_clk: i_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7779_CLK_PLLA>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "i"; + }; + s3_clk: s3_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7779_CLK_PLLA>; + #clock-cells = <0>; + clock-div = <8>; + clock-mult = <1>; + clock-output-names = "s3"; + }; + s4_clk: s4_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7779_CLK_PLLA>; + #clock-cells = <0>; + clock-div = <16>; + clock-mult = <1>; + clock-output-names = "s4"; + }; + g_clk: g_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7779_CLK_PLLA>; + #clock-cells = <0>; + clock-div = <24>; + clock-mult = <1>; + clock-output-names = "g"; + }; + + /* Gate clocks */ + mstp0_clks: clocks@ffc80030 { + compatible = "renesas,r8a7779-mstp-clocks", + "renesas,cpg-mstp-clocks"; + reg = <0xffc80030 4>; + clocks = <&cpg_clocks R8A7779_CLK_S>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_S>, + <&cpg_clocks R8A7779_CLK_S>, + <&cpg_clocks R8A7779_CLK_S1>, + <&cpg_clocks R8A7779_CLK_S1>, + <&cpg_clocks R8A7779_CLK_S1>, + <&cpg_clocks R8A7779_CLK_S1>, + <&cpg_clocks R8A7779_CLK_S1>, + <&cpg_clocks R8A7779_CLK_S1>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7779_CLK_HSPI R8A7779_CLK_TMU2 + R8A7779_CLK_TMU1 R8A7779_CLK_TMU0 + R8A7779_CLK_HSCIF1 R8A7779_CLK_HSCIF0 + R8A7779_CLK_SCIF5 R8A7779_CLK_SCIF4 + R8A7779_CLK_SCIF3 R8A7779_CLK_SCIF2 + R8A7779_CLK_SCIF1 R8A7779_CLK_SCIF0 + R8A7779_CLK_I2C3 R8A7779_CLK_I2C2 + R8A7779_CLK_I2C1 R8A7779_CLK_I2C0 + >; + clock-output-names = + "hspi", "tmu2", "tmu1", "tmu0", "hscif1", + "hscif0", "scif5", "scif4", "scif3", "scif2", + "scif1", "scif0", "i2c3", "i2c2", "i2c1", + "i2c0"; + }; + mstp1_clks: clocks@ffc80034 { + compatible = "renesas,r8a7779-mstp-clocks", + "renesas,cpg-mstp-clocks"; + reg = <0xffc80034 4>, <0xffc80044 4>; + clocks = <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_S>, + <&cpg_clocks R8A7779_CLK_S>, + <&cpg_clocks R8A7779_CLK_S>, + <&cpg_clocks R8A7779_CLK_S>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_S>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7779_CLK_USB01 R8A7779_CLK_USB2 + R8A7779_CLK_DU R8A7779_CLK_VIN2 + R8A7779_CLK_VIN1 R8A7779_CLK_VIN0 + R8A7779_CLK_ETHER R8A7779_CLK_SATA + R8A7779_CLK_PCIE R8A7779_CLK_VIN3 + >; + clock-output-names = + "usb01", "usb2", + "du", "vin2", + "vin1", "vin0", + "ether", "sata", + "pcie", "vin3"; + }; + mstp3_clks: clocks@ffc8003c { + compatible = "renesas,r8a7779-mstp-clocks", + "renesas,cpg-mstp-clocks"; + reg = <0xffc8003c 4>; + clocks = <&s4_clk>, <&s4_clk>, <&s4_clk>, <&s4_clk>, + <&s4_clk>, <&s4_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7779_CLK_SDHI3 R8A7779_CLK_SDHI2 + R8A7779_CLK_SDHI1 R8A7779_CLK_SDHI0 + R8A7779_CLK_MMC1 R8A7779_CLK_MMC0 + >; + clock-output-names = + "sdhi3", "sdhi2", "sdhi1", "sdhi0", + "mmc1", "mmc0"; + }; + }; }; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 6e9a556e1509..0d82a4b3c650 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -583,9 +583,9 @@ #clock-cells = <0>; clock-output-names = "sd1"; }; - sd2_clk: sd3_clk@e615007c { + sd2_clk: sd3_clk@e615026c { compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock"; - reg = <0 0xe615007c 0 4>; + reg = <0 0xe615026c 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; clock-output-names = "sd2"; diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi index 955e4a4f8c31..30b8f7e47454 100644 --- a/arch/arm/boot/dts/s3c2416.dtsi +++ b/arch/arm/boot/dts/s3c2416.dtsi @@ -16,6 +16,10 @@ model = "Samsung S3C2416 SoC"; compatible = "samsung,s3c2416"; + aliases { + serial3 = &uart3; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -68,7 +72,7 @@ <&clocks SCLK_UART>; }; - serial@5000C000 { + uart3: serial@5000C000 { compatible = "samsung,s3c2440-uart"; reg = <0x5000C000 0x4000>; interrupts = <1 18 24 4>, <1 18 25 4>; diff --git a/arch/arm/boot/dts/s3c24xx.dtsi b/arch/arm/boot/dts/s3c24xx.dtsi index 2d1d7dc9418a..5ed43b857cc4 100644 --- a/arch/arm/boot/dts/s3c24xx.dtsi +++ b/arch/arm/boot/dts/s3c24xx.dtsi @@ -16,6 +16,9 @@ aliases { pinctrl0 = &pinctrl_0; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; }; intc:interrupt-controller@4a000000 { @@ -46,21 +49,21 @@ #pwm-cells = <4>; }; - serial@50000000 { + uart0: serial@50000000 { compatible = "samsung,s3c2410-uart"; reg = <0x50000000 0x4000>; interrupts = <1 28 0 4>, <1 28 1 4>; status = "disabled"; }; - serial@50004000 { + uart1: serial@50004000 { compatible = "samsung,s3c2410-uart"; reg = <0x50004000 0x4000>; interrupts = <1 23 3 4>, <1 23 4 4>; status = "disabled"; }; - serial@50008000 { + uart2: serial@50008000 { compatible = "samsung,s3c2410-uart"; reg = <0x50008000 0x4000>; interrupts = <1 15 6 4>, <1 15 7 4>; diff --git a/arch/arm/boot/dts/s3c64xx.dtsi b/arch/arm/boot/dts/s3c64xx.dtsi index 4e3be4d3493d..ff5bdaac987a 100644 --- a/arch/arm/boot/dts/s3c64xx.dtsi +++ b/arch/arm/boot/dts/s3c64xx.dtsi @@ -23,6 +23,10 @@ aliases { i2c0 = &i2c0; pinctrl0 = &pinctrl0; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; }; cpus { diff --git a/arch/arm/boot/dts/s5pv210-aquila.dts b/arch/arm/boot/dts/s5pv210-aquila.dts new file mode 100644 index 000000000000..aa31b84a707a --- /dev/null +++ b/arch/arm/boot/dts/s5pv210-aquila.dts @@ -0,0 +1,392 @@ +/* + * Samsung's S5PV210 SoC device tree source + * + * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd. + * + * Mateusz Krawczuk <m.krawczuk@partner.samsung.com> + * Tomasz Figa <t.figa@samsung.com> + * + * Board device tree source for Samsung Aquila board. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include "s5pv210.dtsi" + +/ { + model = "Samsung Aquila based on S5PC110"; + compatible = "samsung,aquila", "samsung,s5pv210"; + + aliases { + i2c3 = &i2c_pmic; + }; + + chosen { + bootargs = "console=ttySAC2,115200n8 root=/dev/mmcblk1p5 rw rootwait ignore_loglevel earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x30000000 0x05000000 + 0x40000000 0x18000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vtf_reg: fixed-regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "V_TF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpios = <&mp05 4 0>; + enable-active-high; + }; + + pda_reg: fixed-regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1.8V_PDA"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + reg = <1>; + }; + + bat_reg: fixed-regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "V_BAT"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + reg = <2>; + }; + }; + + i2c_pmic: i2c-pmic { + compatible = "i2c-gpio"; + gpios = <&gpj4 0 0>, /* sda */ + <&gpj4 3 0>; /* scl */ + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "national,lp3974"; + reg = <0x66>; + + max8998,pmic-buck1-default-dvs-idx = <0>; + max8998,pmic-buck1-dvs-gpios = <&gph0 3 0>, + <&gph0 4 0>; + max8998,pmic-buck1-dvs-voltage = <1200000>, <1200000>, + <1200000>, <1200000>; + + max8998,pmic-buck2-default-dvs-idx = <0>; + max8998,pmic-buck2-dvs-gpio = <&gph0 5 0>; + max8998,pmic-buck2-dvs-voltage = <1200000>, <1200000>; + + regulators { + ldo2_reg: LDO2 { + regulator-name = "VALIVE_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "VUSB+MIPI_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "VADC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo5_reg: LDO5 { + regulator-name = "VTF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "VCC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "VCC_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo8_reg: LDO8 { + regulator-name = "VUSB+VDAC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo9_reg: LDO9 { + regulator-name = "VCC+VCAM_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "VPLL_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "CAM_IO_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo12_reg: LDO12 { + regulator-name = "CAM_ISP_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo13_reg: LDO13 { + regulator-name = "CAM_A_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo14_reg: LDO14 { + regulator-name = "CAM_CIF_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo15_reg: LDO15 { + regulator-name = "CAM_AF_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo16_reg: LDO16 { + regulator-name = "VMIPI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo17_reg: LDO17 { + regulator-name = "CAM_8M_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "VARM_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "VINT_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "VCC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "CAM_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vichg_reg: ENVICHG { + regulator-name = "VICHG"; + }; + + safeout1_reg: ESAFEOUT1 { + regulator-name = "SAFEOUT1"; + regulator-always-on; + }; + + safeout2_reg: ESAFEOUT2 { + regulator-name = "SAFEOUT2"; + regulator-boot-on; + }; + }; + }; + + }; + + gpio-keys { + compatible = "gpio-keys"; + + power-key { + gpios = <&gph2 6 1>; + linux,code = <KEY_POWER>; + label = "power"; + debounce-interval = <1>; + gpio-key,wakeup; + }; + }; +}; + +&xusbxti { + clock-frequency = <24000000>; +}; + +&keypad { + linux,input-no-autorepeat; + linux,input-wakeup; + samsung,keypad-num-rows = <3>; + samsung,keypad-num-columns = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&keypad_row0>, <&keypad_row1>, <&keypad_row2>, + <&keypad_col0>, <&keypad_col1>, <&keypad_col2>; + status = "okay"; + + key_1 { + keypad,row = <0>; + keypad,column = <1>; + linux,code = <KEY_CONNECT>; + }; + + key_2 { + keypad,row = <0>; + keypad,column = <2>; + linux,code = <KEY_BACK>; + }; + + key_3 { + keypad,row = <1>; + keypad,column = <1>; + linux,code = <KEY_CAMERA_FOCUS>; + }; + + key_4 { + keypad,row = <1>; + keypad,column = <2>; + linux,code = <KEY_VOLUMEUP>; + }; + + key_5 { + keypad,row = <2>; + keypad,column = <1>; + linux,code = <KEY_CAMERA>; + }; + + key_6 { + keypad,row = <2>; + keypad,column = <2>; + linux,code = <KEY_VOLUMEDOWN>; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&sdhci0 { + bus-width = <4>; + non-removable; + status = "okay"; + vmmc-supply = <&ldo5_reg>; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4>; + pinctrl-names = "default"; +}; + +&sdhci2 { + bus-width = <4>; + cd-gpios = <&gph3 4 1>; + vmmc-supply = <&vtf_reg>; + cd-inverted; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &t_flash_detect>; + pinctrl-names = "default"; + status = "okay"; +}; + +&onenand { + status = "okay"; +}; + +&hsotg { + vusb_a-supply = <&ldo3_reg>; + vusb_d-supply = <&ldo8_reg>; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + +&fimd { + pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>; + pinctrl-names = "default"; + status = "okay"; + + display-timings { + native-mode = <&timing0>; + timing0: timing { + clock-frequency = <0>; + hactive = <800>; + vactive = <480>; + hfront-porch = <16>; + hback-porch = <16>; + hsync-len = <2>; + vback-porch = <3>; + vfront-porch = <28>; + vsync-len = <1>; + }; + }; +}; + +&pinctrl0 { + t_flash_detect: t-flash-detect { + samsung,pins = "gph3-4"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + }; +}; diff --git a/arch/arm/boot/dts/s5pv210-goni.dts b/arch/arm/boot/dts/s5pv210-goni.dts new file mode 100644 index 000000000000..6387c77a6f7b --- /dev/null +++ b/arch/arm/boot/dts/s5pv210-goni.dts @@ -0,0 +1,449 @@ +/* + * Samsung's S5PV210 SoC device tree source + * + * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd. + * + * Mateusz Krawczuk <m.krawczuk@partner.samsung.com> + * Tomasz Figa <t.figa@samsung.com> + * + * Board device tree source for Samsung Goni board. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include "s5pv210.dtsi" + +/ { + model = "Samsung Goni based on S5PC110"; + compatible = "samsung,goni", "samsung,s5pv210"; + + aliases { + i2c3 = &i2c_pmic; + }; + + chosen { + bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p5 rw rootwait ignore_loglevel earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x30000000 0x05000000 + 0x40000000 0x10000000 + 0x50000000 0x08000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vtf_reg: fixed-regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "V_TF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + reg = <0>; + gpios = <&mp05 4 0>; + enable-active-high; + }; + + pda_reg: fixed-regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1.8V_PDA"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + reg = <1>; + }; + + bat_reg: fixed-regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "V_BAT"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + reg = <2>; + }; + + tsp_reg: fixed-regulator@3 { + compatible = "regulator-fixed"; + regulator-name = "TSP_VDD"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + reg = <3>; + gpios = <&gpj1 3 0>; + enable-active-high; + }; + }; + + i2c_pmic: i2c-pmic { + compatible = "i2c-gpio"; + gpios = <&gpj4 0 0>, /* sda */ + <&gpj4 3 0>; /* scl */ + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "national,lp3974"; + reg = <0x66>; + + max8998,pmic-buck1-default-dvs-idx = <0>; + max8998,pmic-buck1-dvs-gpios = <&gph0 3 0>, + <&gph0 4 0>; + max8998,pmic-buck1-dvs-voltage = <1200000>, <1200000>, + <1200000>, <1200000>; + + max8998,pmic-buck2-default-dvs-idx = <0>; + max8998,pmic-buck2-dvs-gpio = <&gph0 5 0>; + max8998,pmic-buck2-dvs-voltage = <1200000>, <1200000>; + + regulators { + ldo2_reg: LDO2 { + regulator-name = "VALIVE_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "VUSB+MIPI_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "VADC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo5_reg: LDO5 { + regulator-name = "VTF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo6_reg: LDO6 { + regulator-name = "VCC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo7_reg: LDO7 { + regulator-name = "VLCD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo8_reg: LDO8 { + regulator-name = "VUSB+VDAC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo9_reg: LDO9 { + regulator-name = "VCC+VCAM_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo10_reg: LDO10 { + regulator-name = "VPLL_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "CAM_IO_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo12_reg: LDO12 { + regulator-name = "CAM_ISP_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo13_reg: LDO13 { + regulator-name = "CAM_A_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo14_reg: LDO14 { + regulator-name = "CAM_CIF_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo15_reg: LDO15 { + regulator-name = "CAM_AF_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo16_reg: LDO16 { + regulator-name = "VMIPI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo17_reg: LDO17 { + regulator-name = "CAM_8M_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "VARM_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + buck2_reg: BUCK2 { + regulator-name = "VINT_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + buck3_reg: BUCK3 { + regulator-name = "VCC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "CAM_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power-key { + gpios = <&gph2 6 1>; + linux,code = <KEY_POWER>; + label = "power"; + debounce-interval = <1>; + gpio-key,wakeup; + }; + }; +}; + +&xusbxti { + clock-frequency = <24000000>; +}; + +&keypad { + linux,input-no-autorepeat; + linux,input-wakeup; + samsung,keypad-num-rows = <3>; + samsung,keypad-num-columns = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&keypad_row0>, <&keypad_row1>, <&keypad_row2>, + <&keypad_col0>, <&keypad_col1>, <&keypad_col2>; + status = "okay"; + + key_1 { + keypad,row = <0>; + keypad,column = <1>; + linux,code = <KEY_CONNECT>; + }; + + key_2 { + keypad,row = <0>; + keypad,column = <2>; + linux,code = <KEY_BACK>; + }; + + key_3 { + keypad,row = <1>; + keypad,column = <1>; + linux,code = <KEY_CAMERA_FOCUS>; + }; + + key_4 { + keypad,row = <1>; + keypad,column = <2>; + linux,code = <KEY_VOLUMEUP>; + }; + + key_5 { + keypad,row = <2>; + keypad,column = <1>; + linux,code = <KEY_CAMERA>; + }; + + key_6 { + keypad,row = <2>; + keypad,column = <2>; + linux,code = <KEY_VOLUMEDOWN>; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&sdhci0 { + bus-width = <4>; + non-removable; + vmmc-supply = <&ldo5_reg>; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus1 &sd0_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhci2 { + bus-width = <4>; + cd-gpios = <&gph3 4 1>; + vmmc-supply = <&vtf_reg>; + cd-inverted; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&hsotg { + vusb_a-supply = <&ldo3_reg>; + vusb_d-supply = <&ldo8_reg>; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + +&i2c2 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <400000>; + samsung,i2c-slave-addr = <0x10>; + status = "okay"; + + tsp@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + interrupt-parent = <&gpj0>; + interrupts = <5 2>; + + atmel,x-line = <17>; + atmel,y-line = <11>; + atmel,x-size = <800>; + atmel,y-size = <480>; + atmel,burst-length = <0x21>; + atmel,threshold = <0x28>; + atmel,orientation = <1>; + + vdd-supply = <&tsp_reg>; + }; +}; + +&i2c0 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <100000>; + samsung,i2c-slave-addr = <0x10>; + status = "okay"; + + noon010pc30: sensor@30 { + compatible = "siliconfile,noon010pc30"; + reg = <0x30>; + vddio-supply = <&ldo11_reg>; + vdda-supply = <&ldo13_reg>; + vdd_core-supply = <&ldo14_reg>; + + clock-frequency = <16000000>; + clocks = <&clock_cam 0>; + clock-names = "mclk"; + nreset-gpios = <&gpb 2 0>; + nstby-gpios = <&gpb 0 0>; + + port { + noon010pc30_ep: endpoint { + remote-endpoint = <&fimc0_ep>; + bus-width = <8>; + hsync-active = <0>; + vsync-active = <1>; + pclk-sample = <1>; + }; + }; + }; +}; + +&camera { + pinctrl-0 = <&cam_port_a_io &cam_port_a_clk_active>; + pinctrl-1 = <&cam_port_a_io &cam_port_a_clk_idle>; + pinctrl-names = "default", "idle"; + + parallel-ports { + #address-cells = <1>; + #size-cells = <0>; + + /* camera A input */ + port@1 { + reg = <1>; + fimc0_ep: endpoint { + remote-endpoint = <&noon010pc30_ep>; + bus-width = <8>; + hsync-active = <1>; + vsync-active = <1>; + pclk-sample = <0>; + }; + }; + }; +}; + +&fimd { + pinctrl-0 = <&lcd_clk &lcd_data24>; + pinctrl-names = "default"; + status = "okay"; + + display-timings { + native-mode = <&timing0>; + timing0: timing { + /* 480x800@55Hz */ + clock-frequency = <23439570>; + hactive = <480>; + hfront-porch = <16>; + hback-porch = <16>; + hsync-len = <2>; + vactive = <800>; + vback-porch = <2>; + vfront-porch = <28>; + vsync-len = <1>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <0>; + pixelclk-active = <0>; + }; + }; +}; + +&onenand { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi new file mode 100644 index 000000000000..8c714088e3c6 --- /dev/null +++ b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi @@ -0,0 +1,839 @@ +/* + * Samsung's S5PV210 SoC device tree source + * + * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd. + * + * Mateusz Krawczuk <m.krawczuk@partner.samsung.com> + * Tomasz Figa <t.figa@samsung.com> + * + * Samsung's S5PV210 SoC device nodes are listed in this file. S5PV210 + * based board files can include this file and provide values for board specfic + * bindings. + * + * Note: This file does not include device nodes for all the controllers in + * S5PV210 SoC. As device tree coverage for S5PV210 increases, additional + * nodes can be added to this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&pinctrl0 { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb: gpb { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc0: gpc0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd0: gpd0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd1: gpd1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe0: gpe0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe1: gpe1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf0: gpf0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf1: gpf1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf2: gpf2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf3: gpf3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg0: gpg0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg1: gpg1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg2: gpg2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg3: gpg3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj0: gpj0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj1: gpj1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj2: gpj2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj3: gpj3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj4: gpj4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpgi: gpgi { + gpio-controller; + #gpio-cells = <2>; + }; + + mp01: mp01 { + gpio-controller; + #gpio-cells = <2>; + }; + + mp02: mp02 { + gpio-controller; + #gpio-cells = <2>; + }; + + mp03: mp03 { + gpio-controller; + #gpio-cells = <2>; + }; + + mp04: mp04 { + gpio-controller; + #gpio-cells = <2>; + }; + + mp05: mp05 { + gpio-controller; + #gpio-cells = <2>; + }; + + mp06: mp06 { + gpio-controller; + #gpio-cells = <2>; + }; + + mp07: mp07 { + gpio-controller; + #gpio-cells = <2>; + }; + + gph0: gph0 { + gpio-controller; + interrupt-controller; + interrupt-parent = <&vic0>; + interrupts = <0>, <1>, <2>, <3>, + <4>, <5>, <6>, <7>; + #gpio-cells = <2>; + #interrupt-cells = <2>; + }; + + gph1: gph1 { + gpio-controller; + interrupt-controller; + interrupt-parent = <&vic0>; + interrupts = <8>, <9>, <10>, <11>, + <12>, <13>, <14>, <15>; + #gpio-cells = <2>; + #interrupt-cells = <2>; + }; + + gph2: gph2 { + gpio-controller; + #gpio-cells = <2>; + #interrupt-cells = <2>; + }; + + gph3: gph3 { + gpio-controller; + #gpio-cells = <2>; + #interrupt-cells = <2>; + }; + + uart0_data: uart0-data { + samsung,pins = "gpa0-0", "gpa0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart0_fctl: uart0-fctl { + samsung,pins = "gpa0-2", "gpa0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart1_data: uart1-data { + samsung,pins = "gpa0-4", "gpa0-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart1_fctl: uart1-fctl { + samsung,pins = "gpa0-6", "gpa0-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart2_data: uart2-data { + samsung,pins = "gpa1-0", "gpa1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart2_fctl: uart2-fctl { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart3_data: uart3-data { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart_audio: uart-audio { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <4>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + spi0_bus: spi0-bus { + samsung,pins = "gpb-0", "gpb-2", "gpb-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <0>; + }; + + spi1_bus: spi1-bus { + samsung,pins = "gpb-4", "gpb-6", "gpb-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <0>; + }; + + i2s0_bus: i2s0-bus { + samsung,pins = "gpi-0", "gpi-1", "gpi-2", "gpi-3", + "gpi-4", "gpi-5", "gpi-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2s1_bus: i2s1-bus { + samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3", + "gpc0-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2s2_bus: i2s2-bus { + samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", + "gpc1-4"; + samsung,pin-function = <4>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pcm1_bus: pcm1-bus { + samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3", + "gpc0-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + ac97_bus: ac97-bus { + samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3", + "gpc0-4"; + samsung,pin-function = <4>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2s2_bus: i2s2-bus { + samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", + "gpc1-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pcm2_bus: pcm2-bus { + samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", + "gpc1-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + spdif_bus: spdif-bus { + samsung,pins = "gpc1-0", "gpc1-1"; + samsung,pin-function = <4>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + spi2_bus: spi2-bus { + samsung,pins = "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4"; + samsung,pin-function = <5>; + samsung,pin-pud = <2>; + samsung,pin-drv = <0>; + }; + + i2c0_bus: i2c0-bus { + samsung,pins = "gpd1-0", "gpd1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <0>; + }; + + i2c1_bus: i2c1-bus { + samsung,pins = "gpd1-2", "gpd1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <0>; + }; + + i2c2_bus: i2c2-bus { + samsung,pins = "gpd1-4", "gpd1-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <0>; + }; + + pwm0_out: pwm0-out { + samsung,pins = "gpd0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm1_out: pwm1-out { + samsung,pins = "gpd0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm2_out: pwm2-out { + samsung,pins = "gpd0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm3_out: pwm3-out { + samsung,pins = "gpd0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_row0: keypad-row-0 { + samsung,pins = "gph3-0"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_row1: keypad-row-1 { + samsung,pins = "gph3-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_row2: keypad-row-2 { + samsung,pins = "gph3-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_row3: keypad-row-3 { + samsung,pins = "gph3-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_row4: keypad-row-4 { + samsung,pins = "gph3-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_row5: keypad-row-5 { + samsung,pins = "gph3-5"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_row6: keypad-row-6 { + samsung,pins = "gph3-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_row7: keypad-row-7 { + samsung,pins = "gph3-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col0: keypad-col-0 { + samsung,pins = "gph2-0"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col1: keypad-col-1 { + samsung,pins = "gph2-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col2: keypad-col-2 { + samsung,pins = "gph2-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col3: keypad-col-3 { + samsung,pins = "gph2-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col4: keypad-col-4 { + samsung,pins = "gph2-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col5: keypad-col-5 { + samsung,pins = "gph2-5"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col6: keypad-col-6 { + samsung,pins = "gph2-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col7: keypad-col-7 { + samsung,pins = "gph2-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + sd0_clk: sd0-clk { + samsung,pins = "gpg0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_cmd: sd0-cmd { + samsung,pins = "gpg0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_cd: sd0-cd { + samsung,pins = "gpg0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd0_bus1: sd0-bus-width1 { + samsung,pins = "gpg0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd0_bus4: sd0-bus-width4 { + samsung,pins = "gpg0-3", "gpg0-4", "gpg0-5", "gpg0-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd0_bus8: sd0-bus-width8 { + samsung,pins = "gpg1-3", "gpg1-4", "gpg1-5", "gpg1-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd1_clk: sd1-clk { + samsung,pins = "gpg1-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd1_cmd: sd1-cmd { + samsung,pins = "gpg1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd1_cd: sd1-cd { + samsung,pins = "gpg1-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd1_bus1: sd1-bus-width1 { + samsung,pins = "gpg1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd1_bus4: sd1-bus-width4 { + samsung,pins = "gpg1-3", "gpg1-4", "gpg1-5", "gpg1-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd2_clk: sd2-clk { + samsung,pins = "gpg2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd2_cmd: sd2-cmd { + samsung,pins = "gpg2-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd2_cd: sd2-cd { + samsung,pins = "gpg2-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd2_bus1: sd2-bus-width1 { + samsung,pins = "gpg2-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd2_bus4: sd2-bus-width4 { + samsung,pins = "gpg2-3", "gpg2-4", "gpg2-5", "gpg2-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd2_bus8: sd2-bus-width8 { + samsung,pins = "gpg3-3", "gpg3-4", "gpg3-5", "gpg3-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd3_clk: sd3-clk { + samsung,pins = "gpg3-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd3_cmd: sd3-cmd { + samsung,pins = "gpg3-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd3_cd: sd3-cd { + samsung,pins = "gpg3-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd3_bus1: sd3-bus-width1 { + samsung,pins = "gpg3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd3_bus4: sd3-bus-width4 { + samsung,pins = "gpg3-3", "gpg3-4", "gpg3-5", "gpg3-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + eint0: ext-int0 { + samsung,pins = "gph0-0"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + eint8: ext-int8 { + samsung,pins = "gph1-0"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + eint15: ext-int15 { + samsung,pins = "gph1-7"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + eint16: ext-int16 { + samsung,pins = "gph2-0"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + eint31: ext-int31 { + samsung,pins = "gph3-7"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + cam_port_a_io: cam-port-a-io { + samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3", + "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7", + "gpe1-0", "gpe1-1", "gpe1-2", "gpe1-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + cam_port_a_clk_active: cam-port-a-clk-active { + samsung,pins = "gpe1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + cam_port_a_clk_idle: cam-port-a-clk-idle { + samsung,pins = "gpe1-3"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; + + cam_port_b_io: cam-port-b-io { + samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3", + "gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7", + "gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + cam_port_b_clk_active: cam-port-b-clk-active { + samsung,pins = "gpj1-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + cam_port_b_clk_idle: cam-port-b-clk-idle { + samsung,pins = "gpj1-3"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; + + lcd_ctrl: lcd-ctrl { + samsung,pins = "gpd0-0", "gpd0-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_sync: lcd-sync { + samsung,pins = "gpf0-0", "gpf0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_clk: lcd-clk { + samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_data24: lcd-data-width24 { + samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7", + "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3", + "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7", + "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3", + "gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7", + "gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; diff --git a/arch/arm/boot/dts/s5pv210-smdkc110.dts b/arch/arm/boot/dts/s5pv210-smdkc110.dts new file mode 100644 index 000000000000..1eedab7ffe94 --- /dev/null +++ b/arch/arm/boot/dts/s5pv210-smdkc110.dts @@ -0,0 +1,78 @@ +/* + * Samsung's S5PV210 SoC device tree source + * + * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd. + * + * Mateusz Krawczuk <m.krawczuk@partner.samsung.com> + * Tomasz Figa <t.figa@samsung.com> + * + * Board device tree source for YIC System SMDC110 board. + * + * NOTE: This file is completely based on original board file for mach-smdkc110 + * available in Linux 3.15 and intends to provide equivalent level of hardware + * support. Due to lack of hardware, _no_ testing has been performed. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include "s5pv210.dtsi" + +/ { + model = "YIC System SMDKC110 based on S5PC110"; + compatible = "yic,smdkc110", "samsung,s5pv210"; + + chosen { + bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rw rootwait ignore_loglevel earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x20000000 0x20000000>; + }; +}; + +&xusbxti { + clock-frequency = <24000000>; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + audio-codec@1b { + compatible = "wlf,wm8580"; + reg = <0x1b>; + }; + + eeprom@50 { + compatible = "atmel,24c08"; + reg = <0x50>; + }; +}; + +&i2s0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/s5pv210-smdkv210.dts b/arch/arm/boot/dts/s5pv210-smdkv210.dts new file mode 100644 index 000000000000..cb8521899ec8 --- /dev/null +++ b/arch/arm/boot/dts/s5pv210-smdkv210.dts @@ -0,0 +1,238 @@ +/* + * Samsung's S5PV210 SoC device tree source + * + * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd. + * + * Mateusz Krawczuk <m.krawczuk@partner.samsung.com> + * Tomasz Figa <t.figa@samsung.com> + * + * Board device tree source for YIC System SMDV210 board. + * + * NOTE: This file is completely based on original board file for mach-smdkv210 + * available in Linux 3.15 and intends to provide equivalent level of hardware + * support. Due to lack of hardware, _no_ testing has been performed. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include "s5pv210.dtsi" + +/ { + model = "YIC System SMDKV210 based on S5PV210"; + compatible = "yic,smdkv210", "samsung,s5pv210"; + + chosen { + bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rw rootwait ignore_loglevel earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x20000000 0x40000000>; + }; + + ethernet@18000000 { + compatible = "davicom,dm9000"; + reg = <0xA8000000 0x2 0xA8000002 0x2>; + interrupt-parent = <&gph1>; + interrupts = <1 4>; + local-mac-address = [00 00 de ad be ef]; + davicom,no-eeprom; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 3 5000000 0>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_out>; + }; +}; + +&xusbxti { + clock-frequency = <24000000>; +}; + +&keypad { + linux,input-no-autorepeat; + linux,input-wakeup; + samsung,keypad-num-rows = <8>; + samsung,keypad-num-columns = <8>; + pinctrl-names = "default"; + pinctrl-0 = <&keypad_row0>, <&keypad_row1>, <&keypad_row2>, + <&keypad_row3>, <&keypad_row4>, <&keypad_row5>, + <&keypad_row6>, <&keypad_row7>, + <&keypad_col0>, <&keypad_col1>, <&keypad_col2>, + <&keypad_col3>, <&keypad_col4>, <&keypad_col5>, + <&keypad_col6>, <&keypad_col7>; + status = "okay"; + + key_1 { + keypad,row = <0>; + keypad,column = <3>; + linux,code = <KEY_1>; + }; + + key_2 { + keypad,row = <0>; + keypad,column = <4>; + linux,code = <KEY_2>; + }; + + key_3 { + keypad,row = <0>; + keypad,column = <5>; + linux,code = <KEY_3>; + }; + + key_4 { + keypad,row = <0>; + keypad,column = <6>; + linux,code = <KEY_4>; + }; + + key_5 { + keypad,row = <0 + >; + keypad,column = <7>; + linux,code = <KEY_5>; + }; + + key_6 { + keypad,row = <1>; + keypad,column = <3>; + linux,code = <KEY_A>; + }; + key_7 { + keypad,row = <1>; + keypad,column = <4>; + linux,code = <KEY_B>; + }; + + key_8 { + keypad,row = <1>; + keypad,column = <5>; + linux,code = <KEY_C>; + }; + + key_9 { + keypad,row = <1>; + keypad,column = <6>; + linux,code = <KEY_D>; + }; + + key_10 { + keypad,row = <1>; + keypad,column = <7>; + linux,code = <KEY_E>; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&sdhci0 { + bus-width = <4>; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus1 &sd0_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhci1 { + bus-width = <4>; + pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus1 &sd1_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhci2 { + bus-width = <4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhci3 { + bus-width = <4>; + pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_cd &sd3_bus1 &sd3_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&hsotg { + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + +&fimd { + pinctrl-0 = <&lcd_clk &lcd_data24>; + pinctrl-names = "default"; + status = "okay"; + + display-timings { + native-mode = <&timing0>; + + timing0: timing@0 { + /* 800x480@60Hz */ + clock-frequency = <24373920>; + hactive = <800>; + vactive = <480>; + hfront-porch = <8>; + hback-porch = <13>; + hsync-len = <3>; + vback-porch = <7>; + vfront-porch = <5>; + vsync-len = <1>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; +}; + +&pwm { + samsung,pwm-outputs = <3>; +}; + +&i2c0 { + status = "okay"; + + audio-codec@1b { + compatible = "wlf,wm8580"; + reg = <0x1b>; + }; + + eeprom@50 { + compatible = "atmel,24c08"; + reg = <0x50>; + }; +}; + +&i2s0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/s5pv210-torbreck.dts b/arch/arm/boot/dts/s5pv210-torbreck.dts new file mode 100644 index 000000000000..622599fd2cfa --- /dev/null +++ b/arch/arm/boot/dts/s5pv210-torbreck.dts @@ -0,0 +1,92 @@ +/* + * Samsung's S5PV210 SoC device tree source + * + * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd. + * + * Mateusz Krawczuk <m.krawczuk@partner.samsung.com> + * Tomasz Figa <t.figa@samsung.com> + * + * Board device tree source for Torbreck board. + * + * NOTE: This file is completely based on original board file for mach-torbreck + * available in Linux 3.15 and intends to provide equivalent level of hardware + * support. Due to lack of hardware, _no_ testing has been performed. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include "s5pv210.dtsi" + +/ { + model = "aESOP Torbreck based on S5PV210"; + compatible = "aesop,torbreck", "samsung,s5pv210"; + + chosen { + bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rw rootwait ignore_loglevel earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x20000000 0x20000000>; + }; +}; + +&xusbxti { + clock-frequency = <24000000>; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&sdhci0 { + bus-width = <4>; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus1 &sd0_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhci1 { + bus-width = <4>; + pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus1 &sd1_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhci2 { + bus-width = <4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhci3 { + bus-width = <4>; + pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_cd &sd3_bus1 &sd3_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&i2s0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi new file mode 100644 index 000000000000..8344a0ee2b86 --- /dev/null +++ b/arch/arm/boot/dts/s5pv210.dtsi @@ -0,0 +1,633 @@ +/* + * Samsung's S5PV210 SoC device tree source + * + * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd. + * + * Mateusz Krawczuk <m.krawczuk@partner.samsung.com> + * Tomasz Figa <t.figa@samsung.com> + * + * Samsung's S5PV210 SoC device nodes are listed in this file. S5PV210 + * based board files can include this file and provide values for board specfic + * bindings. + * + * Note: This file does not include device nodes for all the controllers in + * S5PV210 SoC. As device tree coverage for S5PV210 increases, additional + * nodes can be added to this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include "skeleton.dtsi" +#include <dt-bindings/clock/s5pv210.h> +#include <dt-bindings/clock/s5pv210-audss.h> + +/ { + aliases { + csis0 = &csis0; + fimc0 = &fimc0; + fimc1 = &fimc1; + fimc2 = &fimc2; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2s0 = &i2s0; + i2s1 = &i2s1; + i2s2 = &i2s2; + pinctrl0 = &pinctrl0; + spi0 = &spi0; + spi1 = &spi1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a8"; + reg = <0>; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + external-clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + xxti: oscillator@0 { + compatible = "fixed-clock"; + reg = <0>; + clock-frequency = <0>; + clock-output-names = "xxti"; + #clock-cells = <0>; + }; + + xusbxti: oscillator@1 { + compatible = "fixed-clock"; + reg = <1>; + clock-frequency = <0>; + clock-output-names = "xusbxti"; + #clock-cells = <0>; + }; + }; + + onenand: onenand@b0000000 { + compatible = "samsung,s5pv210-onenand"; + reg = <0xb0600000 0x2000>, + <0xb0000000 0x20000>, + <0xb0040000 0x20000>; + interrupt-parent = <&vic1>; + interrupts = <31>; + clocks = <&clocks CLK_NANDXL>, <&clocks DOUT_FLASH>; + clock-names = "bus", "onenand"; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + }; + + chipid@e0000000 { + compatible = "samsung,s5pv210-chipid"; + reg = <0xe0000000 0x1000>; + }; + + clocks: clock-controller@e0100000 { + compatible = "samsung,s5pv210-clock", "simple-bus"; + reg = <0xe0100000 0x10000>; + clock-names = "xxti", "xusbxti"; + clocks = <&xxti>, <&xusbxti>; + #clock-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pmu_syscon: syscon@e0108000 { + compatible = "samsung-s5pv210-pmu", "syscon"; + reg = <0xe0108000 0x8000>; + }; + }; + + pinctrl0: pinctrl@e0200000 { + compatible = "samsung,s5pv210-pinctrl"; + reg = <0xe0200000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <30>; + + wakeup-interrupt-controller { + compatible = "samsung,exynos4210-wakeup-eint"; + interrupts = <16>; + interrupt-parent = <&vic0>; + }; + }; + + amba { + #address-cells = <1>; + #size-cells = <1>; + compatible = "arm,amba-bus"; + ranges; + + pdma0: dma@e0900000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xe0900000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <19>; + clocks = <&clocks CLK_PDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + pdma1: dma@e0a00000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xe0a00000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <20>; + clocks = <&clocks CLK_PDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + }; + + spi0: spi@e1300000 { + compatible = "samsung,s5pv210-spi"; + reg = <0xe1300000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <15>; + dmas = <&pdma0 7>, <&pdma0 6>; + dma-names = "tx", "rx"; + clocks = <&clocks SCLK_SPI0>, <&clocks CLK_SPI0>; + clock-names = "spi", "spi_busclk0"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_bus>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@e1400000 { + compatible = "samsung,s5pv210-spi"; + reg = <0xe1400000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <16>; + dmas = <&pdma1 7>, <&pdma1 6>; + dma-names = "tx", "rx"; + clocks = <&clocks SCLK_SPI1>, <&clocks CLK_SPI1>; + clock-names = "spi", "spi_busclk0"; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_bus>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + keypad: keypad@e1600000 { + compatible = "samsung,s5pv210-keypad"; + reg = <0xe1600000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <25>; + clocks = <&clocks CLK_KEYIF>; + clock-names = "keypad"; + status = "disabled"; + }; + + i2c0: i2c@e1800000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0xe1800000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <14>; + clocks = <&clocks CLK_I2C0>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_bus>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@e1a00000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0xe1a00000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <19>; + clocks = <&clocks CLK_I2C2>; + clock-names = "i2c"; + pinctrl-0 = <&i2c2_bus>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + audio-subsystem { + compatible = "samsung,s5pv210-audss", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clk_audss: clock-controller@eee10000 { + compatible = "samsung,s5pv210-audss-clock"; + reg = <0xeee10000 0x1000>; + clock-names = "hclk", "xxti", + "fout_epll", + "sclk_audio0"; + clocks = <&clocks DOUT_HCLKP>, <&xxti>, + <&clocks FOUT_EPLL>, + <&clocks SCLK_AUDIO0>; + #clock-cells = <1>; + }; + + i2s0: i2s@eee30000 { + compatible = "samsung,s5pv210-i2s"; + reg = <0xeee30000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <16>; + dma-names = "rx", "tx", "tx-sec"; + dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>; + clock-names = "iis", + "i2s_opclk0", + "i2s_opclk1"; + clocks = <&clk_audss CLK_I2S>, + <&clk_audss CLK_I2S>, + <&clk_audss CLK_DOUT_AUD_BUS>; + samsung,idma-addr = <0xc0010000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_bus>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + }; + + i2s1: i2s@e2100000 { + compatible = "samsung,s3c6410-i2s"; + reg = <0xe2100000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <17>; + dma-names = "rx", "tx"; + dmas = <&pdma1 12>, <&pdma1 13>; + clock-names = "iis", "i2s_opclk0"; + clocks = <&clocks CLK_I2S1>, <&clocks SCLK_AUDIO1>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s1_bus>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s2: i2s@e2a00000 { + compatible = "samsung,s3c6410-i2s"; + reg = <0xe2a00000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <18>; + dma-names = "rx", "tx"; + dmas = <&pdma1 14>, <&pdma1 15>; + clock-names = "iis", "i2s_opclk0"; + clocks = <&clocks CLK_I2S2>, <&clocks SCLK_AUDIO2>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s2_bus>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + pwm: pwm@e2500000 { + compatible = "samsung,s5pc100-pwm"; + reg = <0xe2500000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <21>, <22>, <23>, <24>, <25>; + clock-names = "timers"; + clocks = <&clocks CLK_PWM>; + #pwm-cells = <3>; + }; + + watchdog: watchdog@e2700000 { + compatible = "samsung,s3c2410-wdt"; + reg = <0xe2700000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <26>; + clock-names = "watchdog"; + clocks = <&clocks CLK_WDT>; + }; + + rtc: rtc@e2800000 { + compatible = "samsung,s3c6410-rtc"; + reg = <0xe2800000 0x100>; + interrupt-parent = <&vic0>; + interrupts = <28>, <29>; + clocks = <&clocks CLK_RTC>; + clock-names = "rtc"; + status = "disabled"; + }; + + uart0: serial@e2900000 { + compatible = "samsung,s5pv210-uart"; + reg = <0xe2900000 0x400>; + interrupt-parent = <&vic1>; + interrupts = <10>; + clock-names = "uart", "clk_uart_baud0", + "clk_uart_baud1"; + clocks = <&clocks CLK_UART0>, <&clocks CLK_UART0>, + <&clocks SCLK_UART0>; + status = "disabled"; + }; + + uart1: serial@e2900400 { + compatible = "samsung,s5pv210-uart"; + reg = <0xe2900400 0x400>; + interrupt-parent = <&vic1>; + interrupts = <11>; + clock-names = "uart", "clk_uart_baud0", + "clk_uart_baud1"; + clocks = <&clocks CLK_UART1>, <&clocks CLK_UART1>, + <&clocks SCLK_UART1>; + status = "disabled"; + }; + + uart2: serial@e2900800 { + compatible = "samsung,s5pv210-uart"; + reg = <0xe2900800 0x400>; + interrupt-parent = <&vic1>; + interrupts = <12>; + clock-names = "uart", "clk_uart_baud0", + "clk_uart_baud1"; + clocks = <&clocks CLK_UART2>, <&clocks CLK_UART2>, + <&clocks SCLK_UART2>; + status = "disabled"; + }; + + uart3: serial@e2900c00 { + compatible = "samsung,s5pv210-uart"; + reg = <0xe2900c00 0x400>; + interrupt-parent = <&vic1>; + interrupts = <13>; + clock-names = "uart", "clk_uart_baud0", + "clk_uart_baud1"; + clocks = <&clocks CLK_UART3>, <&clocks CLK_UART3>, + <&clocks SCLK_UART3>; + status = "disabled"; + }; + + sdhci0: sdhci@eb000000 { + compatible = "samsung,s3c6410-sdhci"; + reg = <0xeb000000 0x100000>; + interrupt-parent = <&vic1>; + interrupts = <26>; + clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2"; + clocks = <&clocks CLK_HSMMC0>, <&clocks CLK_HSMMC0>, + <&clocks SCLK_MMC0>; + status = "disabled"; + }; + + sdhci1: sdhci@eb100000 { + compatible = "samsung,s3c6410-sdhci"; + reg = <0xeb100000 0x100000>; + interrupt-parent = <&vic1>; + interrupts = <27>; + clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2"; + clocks = <&clocks CLK_HSMMC1>, <&clocks CLK_HSMMC1>, + <&clocks SCLK_MMC1>; + status = "disabled"; + }; + + sdhci2: sdhci@eb200000 { + compatible = "samsung,s3c6410-sdhci"; + reg = <0xeb200000 0x100000>; + interrupt-parent = <&vic1>; + interrupts = <28>; + clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2"; + clocks = <&clocks CLK_HSMMC2>, <&clocks CLK_HSMMC2>, + <&clocks SCLK_MMC2>; + status = "disabled"; + }; + + sdhci3: sdhci@eb300000 { + compatible = "samsung,s3c6410-sdhci"; + reg = <0xeb300000 0x100000>; + interrupt-parent = <&vic3>; + interrupts = <2>; + clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.3"; + clocks = <&clocks CLK_HSMMC3>, <&clocks CLK_HSMMC3>, + <&clocks SCLK_MMC3>; + status = "disabled"; + }; + + hsotg: hsotg@ec000000 { + compatible = "samsung,s3c6400-hsotg"; + reg = <0xec000000 0x20000>; + interrupt-parent = <&vic1>; + interrupts = <24>; + clocks = <&clocks CLK_USB_OTG>; + clock-names = "otg"; + phy-names = "usb2-phy"; + phys = <&usbphy 0>; + status = "disabled"; + }; + + usbphy: usbphy@ec100000 { + compatible = "samsung,s5pv210-usb2-phy"; + reg = <0xec100000 0x100>; + samsung,pmureg-phandle = <&pmu_syscon>; + clocks = <&clocks CLK_USB_OTG>, <&xusbxti>; + clock-names = "phy", "ref"; + #phy-cells = <1>; + status = "disabled"; + }; + + ehci: ehci@ec200000 { + compatible = "samsung,exynos4210-ehci"; + reg = <0xec200000 0x100>; + interrupts = <23>; + interrupt-parent = <&vic1>; + clocks = <&clocks CLK_USB_HOST>; + clock-names = "usbhost"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + port@0 { + reg = <0>; + phys = <&usbphy 1>; + }; + }; + + ohci: ohci@ec300000 { + compatible = "samsung,exynos4210-ohci"; + reg = <0xec300000 0x100>; + interrupts = <23>; + clocks = <&clocks CLK_USB_HOST>; + clock-names = "usbhost"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + port@0 { + reg = <0>; + phys = <&usbphy 1>; + }; + }; + + mfc: codec@f1700000 { + compatible = "samsung,mfc-v5"; + reg = <0xf1700000 0x10000>; + interrupt-parent = <&vic2>; + interrupts = <14>; + clocks = <&clocks DOUT_MFC>, <&clocks CLK_MFC>; + clock-names = "sclk_mfc", "mfc"; + }; + + vic0: interrupt-controller@f2000000 { + compatible = "arm,pl192-vic"; + interrupt-controller; + reg = <0xf2000000 0x1000>; + #interrupt-cells = <1>; + }; + + vic1: interrupt-controller@f2100000 { + compatible = "arm,pl192-vic"; + interrupt-controller; + reg = <0xf2100000 0x1000>; + #interrupt-cells = <1>; + }; + + vic2: interrupt-controller@f2200000 { + compatible = "arm,pl192-vic"; + interrupt-controller; + reg = <0xf2200000 0x1000>; + #interrupt-cells = <1>; + }; + + vic3: interrupt-controller@f2300000 { + compatible = "arm,pl192-vic"; + interrupt-controller; + reg = <0xf2300000 0x1000>; + #interrupt-cells = <1>; + }; + + fimd: fimd@f8000000 { + compatible = "samsung,exynos4210-fimd"; + interrupt-parent = <&vic2>; + reg = <0xf8000000 0x20000>; + interrupt-names = "fifo", "vsync", "lcd_sys"; + interrupts = <0>, <1>, <2>; + clocks = <&clocks SCLK_FIMD>, <&clocks CLK_FIMD>; + clock-names = "sclk_fimd", "fimd"; + status = "disabled"; + }; + + g2d: g2d@fa000000 { + compatible = "samsung,s5pv210-g2d"; + reg = <0xfa000000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <9>; + clocks = <&clocks DOUT_G2D>, <&clocks CLK_G2D>; + clock-names = "sclk_fimg2d", "fimg2d"; + }; + + mdma1: mdma@fa200000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xfa200000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <18>; + clocks = <&clocks CLK_MDMA>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; + }; + + i2c1: i2c@fab00000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0xfab00000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <13>; + clocks = <&clocks CLK_I2C1>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_bus>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + camera: camera { + compatible = "samsung,fimc", "simple-bus"; + pinctrl-names = "default"; + pinctrl-0 = <>; + clocks = <&clocks SCLK_CAM0>, <&clocks SCLK_CAM1>; + clock-names = "sclk_cam0", "sclk_cam1"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clock_cam: clock-controller { + #clock-cells = <1>; + }; + + csis0: csis@fa600000 { + compatible = "samsung,s5pv210-csis"; + reg = <0xfa600000 0x4000>; + interrupt-parent = <&vic2>; + interrupts = <29>; + clocks = <&clocks CLK_CSIS>, + <&clocks SCLK_CSIS>; + clock-names = "clk_csis", + "sclk_csis"; + bus-width = <4>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + fimc0: fimc@fb200000 { + compatible = "samsung,s5pv210-fimc"; + reg = <0xfb200000 0x1000>; + interrupts = <5>; + interrupt-parent = <&vic2>; + clocks = <&clocks CLK_FIMC0>, + <&clocks SCLK_FIMC0>; + clock-names = "fimc", + "sclk_fimc"; + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,cam-if; + }; + + fimc1: fimc@fb300000 { + compatible = "samsung,s5pv210-fimc"; + reg = <0xfb300000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <6>; + clocks = <&clocks CLK_FIMC1>, + <&clocks SCLK_FIMC1>; + clock-names = "fimc", + "sclk_fimc"; + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,cam-if; + }; + + fimc2: fimc@fb400000 { + compatible = "samsung,s5pv210-fimc"; + reg = <0xfb400000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <7>; + clocks = <&clocks CLK_FIMC2>, + <&clocks SCLK_FIMC2>; + clock-names = "fimc", + "sclk_fimc"; + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,lcd-wb; + }; + }; + }; +}; + +#include "s5pv210-pinctrl.dtsi" diff --git a/arch/arm/boot/dts/sama5d3_gmac.dtsi b/arch/arm/boot/dts/sama5d3_gmac.dtsi index a6cb0508762f..de5ed59fb446 100644 --- a/arch/arm/boot/dts/sama5d3_gmac.dtsi +++ b/arch/arm/boot/dts/sama5d3_gmac.dtsi @@ -74,7 +74,7 @@ }; macb0: ethernet@f0028000 { - compatible = "cdns,pc302-gem", "cdns,gem"; + compatible = "atmel,sama5d3-gem"; reg = <0xf0028000 0x100>; interrupts = <34 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 0a66d8a9457c..4d77ad690ed5 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -486,6 +486,8 @@ clock-names = "stmmaceth"; resets = <&rst EMAC0_RESET>; reset-names = "stmmaceth"; + snps,multicast-filter-bins = <256>; + snps,perfect-filter-entries = <128>; status = "disabled"; }; @@ -500,6 +502,8 @@ clock-names = "stmmaceth"; resets = <&rst EMAC1_RESET>; reset-names = "stmmaceth"; + snps,multicast-filter-bins = <256>; + snps,perfect-filter-entries = <128>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts index f557feb997f4..90d8b6c7a205 100644 --- a/arch/arm/boot/dts/ste-nomadik-s8815.dts +++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts @@ -4,7 +4,7 @@ */ /dts-v1/; -/include/ "ste-nomadik-stn8815.dtsi" +#include "ste-nomadik-stn8815.dtsi" / { model = "Calao Systems USB-S8815"; diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index d316c955bd5f..dbcf521b017f 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -1,7 +1,9 @@ /* * Device Tree for the ST-Ericsson Nomadik 8815 STn8815 SoC */ -/include/ "skeleton.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include "skeleton.dtsi" / { #address-cells = <1>; @@ -842,8 +844,7 @@ bus-width = <4>; cap-mmc-highspeed; cap-sd-highspeed; - cd-gpios = <&gpio3 15 0x1>; - cd-inverted; + cd-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&mmcsd_default_mux>, <&mmcsd_default_mode>; vmmc-supply = <&vmmc_regulator>; diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index 335a1d8047f2..80b8eddb4105 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -672,6 +672,8 @@ <&tegra_car TEGRA114_CLK_PLL_U>, <&tegra_car TEGRA114_CLK_USBD>; clock-names = "reg", "pll_u", "utmi-pads"; + resets = <&tegra_car 22>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; nvidia,hssync-start-delay = <0>; nvidia,idle-wait-delay = <17>; nvidia,elastic-limit = <16>; @@ -682,6 +684,7 @@ nvidia,hssquelch-level = <2>; nvidia,hsdiscon-level = <5>; nvidia,xcvr-hsslew = <12>; + nvidia,has-utmi-pad-registers; status = "disabled"; }; @@ -705,6 +708,8 @@ <&tegra_car TEGRA114_CLK_PLL_U>, <&tegra_car TEGRA114_CLK_USBD>; clock-names = "reg", "pll_u", "utmi-pads"; + resets = <&tegra_car 59>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; nvidia,hssync-start-delay = <0>; nvidia,idle-wait-delay = <17>; nvidia,elastic-limit = <16>; diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index 3af46d3bfbd5..03916efd6fa9 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -668,6 +668,8 @@ <&tegra_car TEGRA124_CLK_PLL_U>, <&tegra_car TEGRA124_CLK_USBD>; clock-names = "reg", "pll_u", "utmi-pads"; + resets = <&tegra_car 59>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; nvidia,hssync-start-delay = <0>; nvidia,idle-wait-delay = <17>; nvidia,elastic-limit = <16>; @@ -702,6 +704,8 @@ <&tegra_car TEGRA124_CLK_PLL_U>, <&tegra_car TEGRA124_CLK_USBD>; clock-names = "reg", "pll_u", "utmi-pads"; + resets = <&tegra_car 22>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; nvidia,hssync-start-delay = <0>; nvidia,idle-wait-delay = <17>; nvidia,elastic-limit = <16>; @@ -712,6 +716,7 @@ nvidia,hssquelch-level = <2>; nvidia,hsdiscon-level = <5>; nvidia,xcvr-hsslew = <12>; + nvidia,has-utmi-pad-registers; status = "disabled"; }; @@ -736,6 +741,8 @@ <&tegra_car TEGRA124_CLK_PLL_U>, <&tegra_car TEGRA124_CLK_USBD>; clock-names = "reg", "pll_u", "utmi-pads"; + resets = <&tegra_car 58>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; nvidia,hssync-start-delay = <0>; nvidia,idle-wait-delay = <17>; nvidia,elastic-limit = <16>; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 243d84cdbae8..1908f6937e53 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -645,6 +645,8 @@ <&tegra_car TEGRA20_CLK_CLK_M>, <&tegra_car TEGRA20_CLK_USBD>; clock-names = "reg", "pll_u", "timer", "utmi-pads"; + resets = <&tegra_car 22>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; nvidia,has-legacy-mode; nvidia,hssync-start-delay = <9>; nvidia,idle-wait-delay = <17>; @@ -653,6 +655,7 @@ nvidia,xcvr-setup = <9>; nvidia,xcvr-lsfslew = <1>; nvidia,xcvr-lsrslew = <1>; + nvidia,has-utmi-pad-registers; status = "disabled"; }; @@ -676,6 +679,8 @@ <&tegra_car TEGRA20_CLK_PLL_U>, <&tegra_car TEGRA20_CLK_CDEV2>; clock-names = "reg", "pll_u", "ulpi-link"; + resets = <&tegra_car 58>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; status = "disabled"; }; @@ -700,6 +705,8 @@ <&tegra_car TEGRA20_CLK_CLK_M>, <&tegra_car TEGRA20_CLK_USBD>; clock-names = "reg", "pll_u", "timer", "utmi-pads"; + resets = <&tegra_car 59>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; nvidia,hssync-start-delay = <9>; nvidia,idle-wait-delay = <17>; nvidia,elastic-limit = <16>; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 0b1ede940d1f..6b35c29278d7 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -790,6 +790,8 @@ <&tegra_car TEGRA30_CLK_PLL_U>, <&tegra_car TEGRA30_CLK_USBD>; clock-names = "reg", "pll_u", "utmi-pads"; + resets = <&tegra_car 22>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; nvidia,hssync-start-delay = <9>; nvidia,idle-wait-delay = <17>; nvidia,elastic-limit = <16>; @@ -801,6 +803,7 @@ nvidia,xcvr-hsslew = <32>; nvidia,hssquelch-level = <2>; nvidia,hsdiscon-level = <5>; + nvidia,has-utmi-pad-registers; status = "disabled"; }; @@ -824,6 +827,8 @@ <&tegra_car TEGRA30_CLK_PLL_U>, <&tegra_car TEGRA30_CLK_USBD>; clock-names = "reg", "pll_u", "utmi-pads"; + resets = <&tegra_car 58>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; nvidia,hssync-start-delay = <9>; nvidia,idle-wait-delay = <17>; nvidia,elastic-limit = <16>; @@ -858,6 +863,8 @@ <&tegra_car TEGRA30_CLK_PLL_U>, <&tegra_car TEGRA30_CLK_USBD>; clock-names = "reg", "pll_u", "utmi-pads"; + resets = <&tegra_car 59>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; nvidia,hssync-start-delay = <0>; nvidia,idle-wait-delay = <17>; nvidia,elastic-limit = <16>; diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts index e01e5a081def..36c771a2d765 100644 --- a/arch/arm/boot/dts/versatile-ab.dts +++ b/arch/arm/boot/dts/versatile-ab.dts @@ -19,6 +19,41 @@ reg = <0x0 0x08000000>; }; + xtal24mhz: xtal24mhz@24M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + + core-module@10000000 { + compatible = "arm,core-module-versatile", "syscon"; + reg = <0x10000000 0x200>; + + /* OSC1 on AB, OSC4 on PB */ + osc1: cm_aux_osc@24M { + #clock-cells = <0>; + compatible = "arm,versatile-cm-auxosc"; + clocks = <&xtal24mhz>; + }; + + /* The timer clock is the 24 MHz oscillator divided to 1MHz */ + timclk: timclk@1M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <24>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + pclk: pclk@24M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + }; + flash@34000000 { compatible = "arm,versatile-flash"; reg = <0x34000000 0x4000000>; @@ -59,6 +94,8 @@ interrupt-controller; #interrupt-cells = <1>; reg = <0x10140000 0x1000>; + clear-mask = <0xffffffff>; + valid-mask = <0xffffffff>; }; sic: intc@10003000 { @@ -68,69 +105,93 @@ reg = <0x10003000 0x1000>; interrupt-parent = <&vic>; interrupts = <31>; /* Cascaded to vic */ + clear-mask = <0xffffffff>; + valid-mask = <0xffc203f8>; }; dma@10130000 { compatible = "arm,pl081", "arm,primecell"; reg = <0x10130000 0x1000>; interrupts = <17>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; uart0: uart@101f1000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x101f1000 0x1000>; interrupts = <12>; + clocks = <&xtal24mhz>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; }; uart1: uart@101f2000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x101f2000 0x1000>; interrupts = <13>; + clocks = <&xtal24mhz>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; }; uart2: uart@101f3000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x101f3000 0x1000>; interrupts = <14>; + clocks = <&xtal24mhz>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; }; smc@10100000 { compatible = "arm,primecell"; reg = <0x10100000 0x1000>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; mpmc@10110000 { compatible = "arm,primecell"; reg = <0x10110000 0x1000>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; display@10120000 { compatible = "arm,pl110", "arm,primecell"; reg = <0x10120000 0x1000>; interrupts = <16>; + clocks = <&osc1>, <&pclk>; + clock-names = "clcd", "apb_pclk"; }; sctl@101e0000 { compatible = "arm,primecell"; reg = <0x101e0000 0x1000>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; watchdog@101e1000 { compatible = "arm,primecell"; reg = <0x101e1000 0x1000>; interrupts = <0>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; timer@101e2000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x101e2000 0x1000>; interrupts = <4>; + clocks = <&timclk>, <&timclk>, <&pclk>; + clock-names = "timer0", "timer1", "apb_pclk"; }; timer@101e3000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x101e3000 0x1000>; interrupts = <5>; + clocks = <&timclk>, <&timclk>, <&pclk>; + clock-names = "timer0", "timer1", "apb_pclk"; }; gpio0: gpio@101e4000 { @@ -141,6 +202,8 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; gpio1: gpio@101e5000 { @@ -151,24 +214,32 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; rtc@101e8000 { compatible = "arm,pl030", "arm,primecell"; reg = <0x101e8000 0x1000>; interrupts = <10>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; sci@101f0000 { compatible = "arm,primecell"; reg = <0x101f0000 0x1000>; interrupts = <15>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; ssp@101f4000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x101f4000 0x1000>; interrupts = <11>; + clocks = <&xtal24mhz>, <&pclk>; + clock-names = "SSPCLK", "apb_pclk"; }; fpga { @@ -181,23 +252,31 @@ compatible = "arm,primecell"; reg = <0x4000 0x1000>; interrupts = <24>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; mmc@5000 { - compatible = "arm,primecell"; + compatible = "arm,pl180", "arm,primecell"; reg = < 0x5000 0x1000>; interrupts-extended = <&vic 22 &sic 2>; + clocks = <&xtal24mhz>, <&pclk>; + clock-names = "mclk", "apb_pclk"; }; kmi@6000 { compatible = "arm,pl050", "arm,primecell"; reg = <0x6000 0x1000>; interrupt-parent = <&sic>; interrupts = <3>; + clocks = <&xtal24mhz>, <&pclk>; + clock-names = "KMIREFCLK", "apb_pclk"; }; kmi@7000 { compatible = "arm,pl050", "arm,primecell"; reg = <0x7000 0x1000>; interrupt-parent = <&sic>; interrupts = <4>; + clocks = <&xtal24mhz>, <&pclk>; + clock-names = "KMIREFCLK", "apb_pclk"; }; }; }; diff --git a/arch/arm/boot/dts/versatile-pb.dts b/arch/arm/boot/dts/versatile-pb.dts index 65f657711323..d025048119d3 100644 --- a/arch/arm/boot/dts/versatile-pb.dts +++ b/arch/arm/boot/dts/versatile-pb.dts @@ -13,6 +13,8 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; gpio3: gpio@101e7000 { @@ -23,6 +25,8 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; fpga { @@ -31,17 +35,23 @@ reg = <0x9000 0x1000>; interrupt-parent = <&sic>; interrupts = <6>; + clocks = <&xtal24mhz>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; }; sci@a000 { compatible = "arm,primecell"; reg = <0xa000 0x1000>; interrupt-parent = <&sic>; interrupts = <5>; + clocks = <&xtal24mhz>; + clock-names = "apb_pclk"; }; mmc@b000 { - compatible = "arm,primecell"; + compatible = "arm,pl180", "arm,primecell"; reg = <0xb000 0x1000>; interrupts-extended = <&vic 23 &sic 2>; + clocks = <&xtal24mhz>, <&pclk>; + clock-names = "mclk", "apb_pclk"; }; }; }; |