summaryrefslogtreecommitdiff
path: root/arch/arm/mach-imx/mach-imx6q.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-imx/mach-imx6q.c')
-rw-r--r--arch/arm/mach-imx/mach-imx6q.c93
1 files changed, 17 insertions, 76 deletions
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 90372a21087f..d0cfb225ec9a 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -11,11 +11,8 @@
*/
#include <linux/clk.h>
-#include <linux/clk-provider.h>
#include <linux/clkdev.h>
-#include <linux/clocksource.h>
#include <linux/cpu.h>
-#include <linux/delay.h>
#include <linux/export.h>
#include <linux/init.h>
#include <linux/io.h>
@@ -25,7 +22,7 @@
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
-#include <linux/opp.h>
+#include <linux/pm_opp.h>
#include <linux/phy.h>
#include <linux/reboot.h>
#include <linux/regmap.h>
@@ -40,64 +37,6 @@
#include "cpuidle.h"
#include "hardware.h"
-static u32 chip_revision;
-
-int imx6q_revision(void)
-{
- return chip_revision;
-}
-
-static void __init imx6q_init_revision(void)
-{
- u32 rev = imx_anatop_get_digprog();
-
- switch (rev & 0xff) {
- case 0:
- chip_revision = IMX_CHIP_REVISION_1_0;
- break;
- case 1:
- chip_revision = IMX_CHIP_REVISION_1_1;
- break;
- case 2:
- chip_revision = IMX_CHIP_REVISION_1_2;
- break;
- default:
- chip_revision = IMX_CHIP_REVISION_UNKNOWN;
- }
-
- mxc_set_cpu_type(rev >> 16 & 0xff);
-}
-
-static void imx6q_restart(enum reboot_mode mode, const char *cmd)
-{
- struct device_node *np;
- void __iomem *wdog_base;
-
- np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-wdt");
- wdog_base = of_iomap(np, 0);
- if (!wdog_base)
- goto soft;
-
- imx_src_prepare_restart();
-
- /* enable wdog */
- writew_relaxed(1 << 2, wdog_base);
- /* write twice to ensure the request will not get ignored */
- writew_relaxed(1 << 2, wdog_base);
-
- /* wait for reset to assert ... */
- mdelay(500);
-
- pr_err("Watchdog reset failed to assert reset\n");
-
- /* delay to allow the serial port to show the message */
- mdelay(50);
-
-soft:
- /* we'll take a jump through zero as a poor second */
- soft_restart(0);
-}
-
/* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */
static int ksz9021rn_phy_fixup(struct phy_device *phydev)
{
@@ -192,9 +131,20 @@ static void __init imx6q_1588_init(void)
static void __init imx6q_init_machine(void)
{
+ struct device *parent;
+
+ imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q",
+ imx_get_soc_revision());
+
+ mxc_arch_reset_init_dt();
+
+ parent = imx_soc_device_init();
+ if (parent == NULL)
+ pr_warn("failed to initialize soc device\n");
+
imx6q_enet_phy_init();
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
imx_anatop_init();
imx6q_pm_init();
@@ -226,7 +176,7 @@ static void __init imx6q_opp_check_1p2ghz(struct device *cpu_dev)
val = readl_relaxed(base + OCOTP_CFG3);
val >>= OCOTP_CFG3_SPEED_SHIFT;
if ((val & 0x3) != OCOTP_CFG3_SPEED_1P2GHZ)
- if (opp_disable(cpu_dev, 1200000000))
+ if (dev_pm_opp_disable(cpu_dev, 1200000000))
pr_warn("failed to disable 1.2 GHz OPP\n");
put_node:
@@ -269,7 +219,7 @@ static void __init imx6q_init_late(void)
* WAIT mode is broken on TO 1.0 and 1.1, so there is no point
* to run cpuidle on them.
*/
- if (imx6q_revision() > IMX_CHIP_REVISION_1_1)
+ if (imx_get_soc_revision() > IMX_CHIP_REVISION_1_1)
imx6q_cpuidle_init();
if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ)) {
@@ -286,21 +236,13 @@ static void __init imx6q_map_io(void)
static void __init imx6q_init_irq(void)
{
- imx6q_init_revision();
+ imx_init_revision_from_anatop();
imx_init_l2cache();
imx_src_init();
imx_gpc_init();
irqchip_init();
}
-static void __init imx6q_timer_init(void)
-{
- of_clk_init(NULL);
- clocksource_of_init();
- imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q",
- imx6q_revision());
-}
-
static const char *imx6q_dt_compat[] __initdata = {
"fsl,imx6dl",
"fsl,imx6q",
@@ -311,9 +253,8 @@ DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad/DualLite (Device Tree)")
.smp = smp_ops(imx_smp_ops),
.map_io = imx6q_map_io,
.init_irq = imx6q_init_irq,
- .init_time = imx6q_timer_init,
.init_machine = imx6q_init_machine,
.init_late = imx6q_init_late,
.dt_compat = imx6q_dt_compat,
- .restart = imx6q_restart,
+ .restart = mxc_restart,
MACHINE_END