summaryrefslogtreecommitdiff
path: root/arch/arm/mach-kirkwood/netspace_v2-setup.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-kirkwood/netspace_v2-setup.c')
-rw-r--r--arch/arm/mach-kirkwood/netspace_v2-setup.c59
1 files changed, 34 insertions, 25 deletions
diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c
index 9a064065bebe..3ae158d72681 100644
--- a/arch/arm/mach-kirkwood/netspace_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c
@@ -182,8 +182,14 @@ static struct platform_device netspace_v2_gpio_buttons = {
static struct gpio_led netspace_v2_gpio_led_pins[] = {
{
- .name = "ns_v2:red:fail",
- .gpio = NETSPACE_V2_GPIO_RED_LED,
+ .name = "ns_v2:blue:sata",
+ .default_trigger = "default-on",
+ .gpio = NETSPACE_V2_GPIO_BLUE_LED_CMD,
+ .active_low = 1,
+ },
+ {
+ .name = "ns_v2:red:fail",
+ .gpio = NETSPACE_V2_GPIO_RED_LED,
},
};
@@ -202,30 +208,19 @@ static struct platform_device netspace_v2_gpio_leds = {
static void __init netspace_v2_gpio_leds_init(void)
{
- platform_device_register(&netspace_v2_gpio_leds);
+ int err;
- /*
- * Configure the front blue LED to blink in relation with the SATA
- * activity.
- */
- if (gpio_request(NETSPACE_V2_GPIO_BLUE_LED_SLOW,
- "SATA blue LED slow") != 0)
- return;
- if (gpio_direction_output(NETSPACE_V2_GPIO_BLUE_LED_SLOW, 0) != 0)
- goto err_free_1;
- if (gpio_request(NETSPACE_V2_GPIO_BLUE_LED_CMD,
- "SATA blue LED command") != 0)
- goto err_free_1;
- if (gpio_direction_output(NETSPACE_V2_GPIO_BLUE_LED_CMD, 0) != 0)
- goto err_free_2;
-
- return;
-
-err_free_2:
- gpio_free(NETSPACE_V2_GPIO_BLUE_LED_CMD);
-err_free_1:
- gpio_free(NETSPACE_V2_GPIO_BLUE_LED_SLOW);
- pr_err("netspace_v2: failed to configure SATA blue LED\n");
+ /* Configure register slow_led to allow SATA activity LED blinking */
+ err = gpio_request(NETSPACE_V2_GPIO_BLUE_LED_SLOW, "blue LED slow");
+ if (err == 0) {
+ err = gpio_direction_output(NETSPACE_V2_GPIO_BLUE_LED_SLOW, 0);
+ if (err)
+ gpio_free(NETSPACE_V2_GPIO_BLUE_LED_SLOW);
+ }
+ if (err)
+ pr_err("netspace_v2: failed to configure blue LED slow GPIO\n");
+
+ platform_device_register(&netspace_v2_gpio_leds);
}
/*****************************************************************************
@@ -314,6 +309,7 @@ static void __init netspace_v2_init(void)
pr_err("netspace_v2: failed to configure power-off GPIO\n");
}
+#ifdef CONFIG_MACH_NETSPACE_V2
MACHINE_START(NETSPACE_V2, "LaCie Network Space v2")
.phys_io = KIRKWOOD_REGS_PHYS_BASE,
.io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
@@ -323,3 +319,16 @@ MACHINE_START(NETSPACE_V2, "LaCie Network Space v2")
.init_irq = kirkwood_init_irq,
.timer = &netspace_v2_timer,
MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_INETSPACE_V2
+MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2")
+ .phys_io = KIRKWOOD_REGS_PHYS_BASE,
+ .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .init_machine = netspace_v2_init,
+ .map_io = kirkwood_map_io,
+ .init_irq = kirkwood_init_irq,
+ .timer = &netspace_v2_timer,
+MACHINE_END
+#endif