diff options
Diffstat (limited to 'arch/arm/mach-msm/board-msm7x30.c')
-rw-r--r-- | arch/arm/mach-msm/board-msm7x30.c | 57 |
1 files changed, 47 insertions, 10 deletions
diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c index 05241df3f9b6..b7a84966b711 100644 --- a/arch/arm/mach-msm/board-msm7x30.c +++ b/arch/arm/mach-msm/board-msm7x30.c @@ -22,28 +22,67 @@ #include <linux/delay.h> #include <linux/io.h> #include <linux/smsc911x.h> +#include <linux/usb/msm_hsusb.h> +#include <linux/clkdev.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include <asm/memory.h> #include <asm/setup.h> #include <mach/gpio.h> #include <mach/board.h> -#include <mach/memory.h> #include <mach/msm_iomap.h> #include <mach/dma.h> #include <mach/vreg.h> #include "devices.h" +#include "gpiomux.h" #include "proc_comm.h" extern struct sys_timer msm_timer; +static int hsusb_phy_init_seq[] = { + 0x30, 0x32, /* Enable and set Pre-Emphasis Depth to 20% */ + 0x02, 0x36, /* Disable CDR Auto Reset feature */ + -1 +}; + +static struct msm_otg_platform_data msm_otg_pdata = { + .phy_init_seq = hsusb_phy_init_seq, + .mode = USB_PERIPHERAL, + .otg_control = OTG_PHY_CONTROL, +}; + +struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = { +#ifdef CONFIG_SERIAL_MSM_CONSOLE + [49] = { /* UART2 RFR */ + .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN | + GPIOMUX_FUNC_2 | GPIOMUX_VALID, + }, + [50] = { /* UART2 CTS */ + .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN | + GPIOMUX_FUNC_2 | GPIOMUX_VALID, + }, + [51] = { /* UART2 RX */ + .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN | + GPIOMUX_FUNC_2 | GPIOMUX_VALID, + }, + [52] = { /* UART2 TX */ + .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN | + GPIOMUX_FUNC_2 | GPIOMUX_VALID, + }, +#endif +}; + static struct platform_device *devices[] __initdata = { #if defined(CONFIG_SERIAL_MSM) || defined(CONFIG_MSM_SERIAL_DEBUGGER) &msm_device_uart2, #endif &msm_device_smd, + &msm_device_otg, + &msm_device_hsusb, + &msm_device_hsusb_host, }; static void __init msm7x30_init_irq(void) @@ -53,6 +92,10 @@ static void __init msm7x30_init_irq(void) static void __init msm7x30_init(void) { + msm_device_otg.dev.platform_data = &msm_otg_pdata; + msm_device_hsusb.dev.parent = &msm_device_otg.dev; + msm_device_hsusb_host.dev.parent = &msm_device_otg.dev; + platform_add_devices(devices, ARRAY_SIZE(devices)); } @@ -63,9 +106,7 @@ static void __init msm7x30_map_io(void) } MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF") -#ifdef CONFIG_MSM_DEBUG_UART -#endif - .boot_params = PHYS_OFFSET + 0x100, + .boot_params = PLAT_PHYS_OFFSET + 0x100, .map_io = msm7x30_map_io, .init_irq = msm7x30_init_irq, .init_machine = msm7x30_init, @@ -73,9 +114,7 @@ MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF") MACHINE_END MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA") -#ifdef CONFIG_MSM_DEBUG_UART -#endif - .boot_params = PHYS_OFFSET + 0x100, + .boot_params = PLAT_PHYS_OFFSET + 0x100, .map_io = msm7x30_map_io, .init_irq = msm7x30_init_irq, .init_machine = msm7x30_init, @@ -83,9 +122,7 @@ MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA") MACHINE_END MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID") -#ifdef CONFIG_MSM_DEBUG_UART -#endif - .boot_params = PHYS_OFFSET + 0x100, + .boot_params = PLAT_PHYS_OFFSET + 0x100, .map_io = msm7x30_map_io, .init_irq = msm7x30_init_irq, .init_machine = msm7x30_init, |