diff options
Diffstat (limited to 'arch/arm/mach-mx25/mach-cpuimx25.c')
| -rw-r--r-- | arch/arm/mach-mx25/mach-cpuimx25.c | 164 |
1 files changed, 0 insertions, 164 deletions
diff --git a/arch/arm/mach-mx25/mach-cpuimx25.c b/arch/arm/mach-mx25/mach-cpuimx25.c deleted file mode 100644 index f6f9ad60c25e..000000000000 --- a/arch/arm/mach-mx25/mach-cpuimx25.c +++ /dev/null @@ -1,164 +0,0 @@ -/* - * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de> - * Copyright 2010 Eric Bénard - Eukréa Electromatique, <eric@eukrea.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ - -#include <linux/types.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/irq.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/usb/otg.h> -#include <linux/usb/ulpi.h> -#include <linux/fsl_devices.h> - -#include <mach/eukrea-baseboards.h> -#include <mach/hardware.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/memory.h> -#include <asm/mach/map.h> -#include <mach/common.h> -#include <mach/mx25.h> -#include <mach/mxc_nand.h> -#include <mach/imxfb.h> -#include <mach/mxc_ehci.h> -#include <mach/iomux-mx25.h> - -#include "devices-imx25.h" -#include "devices.h" - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static struct pad_desc eukrea_cpuimx25_pads[] = { - /* FEC - RMII */ - MX25_PAD_FEC_MDC__FEC_MDC, - MX25_PAD_FEC_MDIO__FEC_MDIO, - MX25_PAD_FEC_TDATA0__FEC_TDATA0, - MX25_PAD_FEC_TDATA1__FEC_TDATA1, - MX25_PAD_FEC_TX_EN__FEC_TX_EN, - MX25_PAD_FEC_RDATA0__FEC_RDATA0, - MX25_PAD_FEC_RDATA1__FEC_RDATA1, - MX25_PAD_FEC_RX_DV__FEC_RX_DV, - MX25_PAD_FEC_TX_CLK__FEC_TX_CLK, - /* I2C1 */ - MX25_PAD_I2C1_CLK__I2C1_CLK, - MX25_PAD_I2C1_DAT__I2C1_DAT, -}; - -static const struct fec_platform_data mx25_fec_pdata __initconst = { - .phy = PHY_INTERFACE_MODE_RMII, -}; - -static const struct mxc_nand_platform_data -eukrea_cpuimx25_nand_board_info __initconst = { - .width = 1, - .hw_ecc = 1, - .flash_bbt = 1, -}; - -static const struct imxi2c_platform_data -eukrea_cpuimx25_i2c0_data __initconst = { - .bitrate = 100000, -}; - -static struct i2c_board_info eukrea_cpuimx25_i2c_devices[] = { - { - I2C_BOARD_INFO("pcf8563", 0x51), - }, -}; - -static struct mxc_usbh_platform_data otg_pdata = { - .portsc = MXC_EHCI_MODE_UTMI, - .flags = MXC_EHCI_INTERFACE_DIFF_UNI, -}; - -static struct mxc_usbh_platform_data usbh2_pdata = { - .portsc = MXC_EHCI_MODE_SERIAL, - .flags = MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY | - MXC_EHCI_IPPUE_DOWN, -}; - -static struct fsl_usb2_platform_data otg_device_pdata = { - .operating_mode = FSL_USB2_DR_DEVICE, - .phy_mode = FSL_USB2_PHY_UTMI, -}; - -static int otg_mode_host; - -static int __init eukrea_cpuimx25_otg_mode(char *options) -{ - if (!strcmp(options, "host")) - otg_mode_host = 1; - else if (!strcmp(options, "device")) - otg_mode_host = 0; - else - pr_info("otg_mode neither \"host\" nor \"device\". " - "Defaulting to device\n"); - return 0; -} -__setup("otg_mode=", eukrea_cpuimx25_otg_mode); - -static void __init eukrea_cpuimx25_init(void) -{ - if (mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx25_pads, - ARRAY_SIZE(eukrea_cpuimx25_pads))) - printk(KERN_ERR "error setting cpuimx25 pads !\n"); - - imx25_add_imx_uart0(&uart_pdata); - imx25_add_mxc_nand(&eukrea_cpuimx25_nand_board_info); - mxc_register_device(&mx25_rtc_device, NULL); - imx25_add_fec(&mx25_fec_pdata); - - i2c_register_board_info(0, eukrea_cpuimx25_i2c_devices, - ARRAY_SIZE(eukrea_cpuimx25_i2c_devices)); - imx25_add_imx_i2c0(&eukrea_cpuimx25_i2c0_data); - - if (otg_mode_host) - mxc_register_device(&mxc_otg, &otg_pdata); - else - mxc_register_device(&otg_udc_device, &otg_device_pdata); - - mxc_register_device(&mxc_usbh2, &usbh2_pdata); - -#ifdef CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD - eukrea_mbimxsd25_baseboard_init(); -#endif -} - -static void __init eukrea_cpuimx25_timer_init(void) -{ - mx25_clocks_init(); -} - -static struct sys_timer eukrea_cpuimx25_timer = { - .init = eukrea_cpuimx25_timer_init, -}; - -MACHINE_START(EUKREA_CPUIMX25, "Eukrea CPUIMX25") - /* Maintainer: Eukrea Electromatique */ - .boot_params = MX25_PHYS_OFFSET + 0x100, - .map_io = mx25_map_io, - .init_irq = mx25_init_irq, - .init_machine = eukrea_cpuimx25_init, - .timer = &eukrea_cpuimx25_timer, -MACHINE_END |