diff options
Diffstat (limited to 'arch/arm/mach-mx25/mach-mx25_3ds.c')
| -rw-r--r-- | arch/arm/mach-mx25/mach-mx25_3ds.c | 225 |
1 files changed, 0 insertions, 225 deletions
diff --git a/arch/arm/mach-mx25/mach-mx25_3ds.c b/arch/arm/mach-mx25/mach-mx25_3ds.c deleted file mode 100644 index f8be1eb0c062..000000000000 --- a/arch/arm/mach-mx25/mach-mx25_3ds.c +++ /dev/null @@ -1,225 +0,0 @@ -/* - * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ - -/* - * This machine is known as: - * - i.MX25 3-Stack Development System - * - i.MX25 Platform Development Kit (i.MX25 PDK) - */ - -#include <linux/types.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/irq.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/input/matrix_keypad.h> - -#include <mach/hardware.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/memory.h> -#include <asm/mach/map.h> -#include <mach/common.h> -#include <mach/mx25.h> -#include <mach/imxfb.h> -#include <mach/iomux-mx25.h> - -#include "devices-imx25.h" -#include "devices.h" - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static struct pad_desc mx25pdk_pads[] = { - MX25_PAD_FEC_MDC__FEC_MDC, - MX25_PAD_FEC_MDIO__FEC_MDIO, - MX25_PAD_FEC_TDATA0__FEC_TDATA0, - MX25_PAD_FEC_TDATA1__FEC_TDATA1, - MX25_PAD_FEC_TX_EN__FEC_TX_EN, - MX25_PAD_FEC_RDATA0__FEC_RDATA0, - MX25_PAD_FEC_RDATA1__FEC_RDATA1, - MX25_PAD_FEC_RX_DV__FEC_RX_DV, - MX25_PAD_FEC_TX_CLK__FEC_TX_CLK, - MX25_PAD_A17__GPIO_2_3, /* FEC_EN, GPIO 35 */ - MX25_PAD_D12__GPIO_4_8, /* FEC_RESET_B, GPIO 104 */ - - /* LCD */ - MX25_PAD_LD0__LD0, - MX25_PAD_LD1__LD1, - MX25_PAD_LD2__LD2, - MX25_PAD_LD3__LD3, - MX25_PAD_LD4__LD4, - MX25_PAD_LD5__LD5, - MX25_PAD_LD6__LD6, - MX25_PAD_LD7__LD7, - MX25_PAD_LD8__LD8, - MX25_PAD_LD9__LD9, - MX25_PAD_LD10__LD10, - MX25_PAD_LD11__LD11, - MX25_PAD_LD12__LD12, - MX25_PAD_LD13__LD13, - MX25_PAD_LD14__LD14, - MX25_PAD_LD15__LD15, - MX25_PAD_GPIO_E__LD16, - MX25_PAD_GPIO_F__LD17, - MX25_PAD_HSYNC__HSYNC, - MX25_PAD_VSYNC__VSYNC, - MX25_PAD_LSCLK__LSCLK, - MX25_PAD_OE_ACD__OE_ACD, - MX25_PAD_CONTRAST__CONTRAST, - - /* Keypad */ - MX25_PAD_KPP_ROW0__KPP_ROW0, - MX25_PAD_KPP_ROW1__KPP_ROW1, - MX25_PAD_KPP_ROW2__KPP_ROW2, - MX25_PAD_KPP_ROW3__KPP_ROW3, - MX25_PAD_KPP_COL0__KPP_COL0, - MX25_PAD_KPP_COL1__KPP_COL1, - MX25_PAD_KPP_COL2__KPP_COL2, - MX25_PAD_KPP_COL3__KPP_COL3, - - /* SD1 */ - MX25_PAD_SD1_CMD__SD1_CMD, - MX25_PAD_SD1_CLK__SD1_CLK, - MX25_PAD_SD1_DATA0__SD1_DATA0, - MX25_PAD_SD1_DATA1__SD1_DATA1, - MX25_PAD_SD1_DATA2__SD1_DATA2, - MX25_PAD_SD1_DATA3__SD1_DATA3, -}; - -static const struct fec_platform_data mx25_fec_pdata __initconst = { - .phy = PHY_INTERFACE_MODE_RMII, -}; - -#define FEC_ENABLE_GPIO 35 -#define FEC_RESET_B_GPIO 104 - -static void __init mx25pdk_fec_reset(void) -{ - gpio_request(FEC_ENABLE_GPIO, "FEC PHY enable"); - gpio_request(FEC_RESET_B_GPIO, "FEC PHY reset"); - - gpio_direction_output(FEC_ENABLE_GPIO, 0); /* drop PHY power */ - gpio_direction_output(FEC_RESET_B_GPIO, 0); /* assert reset */ - udelay(2); - - /* turn on PHY power and lift reset */ - gpio_set_value(FEC_ENABLE_GPIO, 1); - gpio_set_value(FEC_RESET_B_GPIO, 1); -} - -static const struct mxc_nand_platform_data -mx25pdk_nand_board_info __initconst = { - .width = 1, - .hw_ecc = 1, - .flash_bbt = 1, -}; - -static struct imx_fb_videomode mx25pdk_modes[] = { - { - .mode = { - .name = "CRT-VGA", - .refresh = 60, - .xres = 640, - .yres = 480, - .pixclock = 39683, - .left_margin = 45, - .right_margin = 114, - .upper_margin = 33, - .lower_margin = 11, - .hsync_len = 1, - .vsync_len = 1, - }, - .bpp = 16, - .pcr = 0xFA208B80, - }, -}; - -static struct imx_fb_platform_data mx25pdk_fb_pdata = { - .mode = mx25pdk_modes, - .num_modes = ARRAY_SIZE(mx25pdk_modes), - .pwmr = 0x00A903FF, - .lscr1 = 0x00120300, - .dmacr = 0x00020010, -}; - -static const uint32_t mx25pdk_keymap[] = { - KEY(0, 0, KEY_UP), - KEY(0, 1, KEY_DOWN), - KEY(0, 2, KEY_VOLUMEDOWN), - KEY(0, 3, KEY_HOME), - KEY(1, 0, KEY_RIGHT), - KEY(1, 1, KEY_LEFT), - KEY(1, 2, KEY_ENTER), - KEY(1, 3, KEY_VOLUMEUP), - KEY(2, 0, KEY_F6), - KEY(2, 1, KEY_F8), - KEY(2, 2, KEY_F9), - KEY(2, 3, KEY_F10), - KEY(3, 0, KEY_F1), - KEY(3, 1, KEY_F2), - KEY(3, 2, KEY_F3), - KEY(3, 3, KEY_POWER), -}; - -static struct matrix_keymap_data mx25pdk_keymap_data = { - .keymap = mx25pdk_keymap, - .keymap_size = ARRAY_SIZE(mx25pdk_keymap), -}; - -static void __init mx25pdk_init(void) -{ - mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads, - ARRAY_SIZE(mx25pdk_pads)); - - imx25_add_imx_uart0(&uart_pdata); - mxc_register_device(&mxc_usbh2, NULL); - imx25_add_mxc_nand(&mx25pdk_nand_board_info); - mxc_register_device(&mx25_rtc_device, NULL); - mxc_register_device(&mx25_fb_device, &mx25pdk_fb_pdata); - mxc_register_device(&mxc_wdt, NULL); - - mx25pdk_fec_reset(); - imx25_add_fec(&mx25_fec_pdata); - mxc_register_device(&mx25_kpp_device, &mx25pdk_keymap_data); - - imx25_add_esdhc(0, NULL); -} - -static void __init mx25pdk_timer_init(void) -{ - mx25_clocks_init(); -} - -static struct sys_timer mx25pdk_timer = { - .init = mx25pdk_timer_init, -}; - -MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)") - /* Maintainer: Freescale Semiconductor, Inc. */ - .boot_params = MX25_PHYS_OFFSET + 0x100, - .map_io = mx25_map_io, - .init_irq = mx25_init_irq, - .init_machine = mx25pdk_init, - .timer = &mx25pdk_timer, -MACHINE_END - |