1 files changed, 109 insertions, 0 deletions
diff --git a/arch/arm/mach-ns9xxx/mach-cme9210js.c b/arch/arm/mach-ns9xxx/mach-cme9210js.c
new file mode 100644
index 000000000000..23853f86a778
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/mach-cme9210js.c
@@ -0,0 +1,109 @@
+/*
+ * arch/arm/mach-ns9xxx/mach-cme9210js.c
+ *
+ * Copyright (C) 2008 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/netdevice.h>
+#include <linux/spi/spi.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include "irq.h"
+#include "processor-ns921x.h"
+#include "ns921x_devices.h"
+#include "cme9210_devices.h"
+
+/* SPI devices */
+static struct spi_board_info spi_devices[] __initdata = {
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+	{
+		.modalias	= "spidev",
+		.max_speed_hz	= 10000000,
+		.bus_num	= 1,
+		.chip_select	= 0,
+	},
+#endif
+};
+
+/* I2C devices */
+/* Array to add I2C devices 
+static struct i2c_board_info i2c_devices[] __initdata = {
+	{
+		I2C_BOARD_INFO("device_name", address),
+	},
+};
+*/
+
+static void __init mach_cme9210js_init_machine(void)
+{
+	/* register several system clocks */
+	ns921x_init_machine();
+
+	/* UART */
+#if defined(CONFIG_CME9210JS_SERIAL_PORTA_RXTX)
+	ns9xxx_add_device_cme9210_uarta_rxtx();
+#elif defined(CONFIG_CME9210JS_SERIAL_PORTA_CTSRTSRXTX) || \
+	defined(CONFIG_CME9210JS_SERIAL_PORTA_RXTX485)
+	ns9xxx_add_device_cme9210_uarta_ctsrtsrxtx();
+#elif defined(CONFIG_CME9210JS_SERIAL_PORTA_FULL)
+	ns9xxx_add_device_cme9210_uarta_full();
+#endif
+#if defined(CONFIG_CME9210JS_SERIAL_PORTC_RXTX)
+	ns9xxx_add_device_cme9210_uartc_rxtx();
+#endif
+
+	/* Ethernet */
+	/* Adjust the netdev_max_backlog to a lower value. A big queue
+	 * of incoming packets in the kernel can exhaust the kernel memory
+	 * and trigger the OOM killer. This value can be tuned later in
+	 * user space throught proc fs and with sysctl */
+	netdev_max_backlog = 300;
+	ns9xxx_add_device_cme9210_eth();
+
+	/* Watchdog timer */
+	ns9xxx_add_device_ns921x_wdt();
+
+	/* NOR Flash */
+	ns9xxx_add_device_cme9210_flash();
+
+	/* SPI */
+#ifdef CONFIG_CME9210JS_SPI
+	ns9xxx_add_device_cme9210_spi();
+#endif
+
+	/* SPI devices */
+	spi_register_board_info(spi_devices, ARRAY_SIZE(spi_devices));
+
+	/* I2C controller */
+	ns9xxx_add_device_cme9210_i2c();
+
+	/* I2C devices */
+	/*
+	i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices));
+	*/
+
+	/* Init the FIM devices */
+	ns9xxx_add_device_ns921x_fims();
+
+	/* AES HW Encryption module */
+#if defined(CONFIG_CRYPTO_DEV_NS921X_AES) || \
+	defined(CONFIG_CRYPTO_DEV_NS921X_AES_MODULE)
+	ns9xxx_add_device_ns921x_aes();
+#endif
+}
+
+MACHINE_START(CME9210JS, "Digi Connect ME 9210 on Devboard")
+	.map_io = ns921x_map_io,
+	.init_irq = ns9xxx_init_irq,
+	.init_machine = mach_cme9210js_init_machine,
+	.timer = &ns921x_timer,
+	.boot_params = 0x100,
+MACHINE_END