diff options
Diffstat (limited to 'arch/arm/mach-omap2/board-igep0030.c')
| -rw-r--r-- | arch/arm/mach-omap2/board-igep0030.c | 458 |
1 files changed, 0 insertions, 458 deletions
diff --git a/arch/arm/mach-omap2/board-igep0030.c b/arch/arm/mach-omap2/board-igep0030.c deleted file mode 100644 index 2cf86c3cb1a3..000000000000 --- a/arch/arm/mach-omap2/board-igep0030.c +++ /dev/null @@ -1,458 +0,0 @@ -/* - * Copyright (C) 2010 - ISEE 2007 SL - * - * Modified from mach-omap2/board-generic.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <linux/interrupt.h> - -#include <linux/regulator/machine.h> -#include <linux/regulator/fixed.h> -#include <linux/i2c/twl.h> -#include <linux/mmc/host.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include <plat/board.h> -#include <plat/common.h> -#include <plat/gpmc.h> -#include <plat/usb.h> -#include <plat/onenand.h> - -#include "mux.h" -#include "hsmmc.h" -#include "sdram-numonyx-m65kxxxxam.h" - -#define IGEP3_GPIO_LED0_GREEN 54 -#define IGEP3_GPIO_LED0_RED 53 -#define IGEP3_GPIO_LED1_RED 16 - -#define IGEP3_GPIO_WIFI_NPD 138 -#define IGEP3_GPIO_WIFI_NRESET 139 -#define IGEP3_GPIO_BT_NRESET 137 - -#define IGEP3_GPIO_USBH_NRESET 183 - - -#if defined(CONFIG_MTD_ONENAND_OMAP2) || \ - defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) - -#define ONENAND_MAP 0x20000000 - -/* - * x2 Flash built-in COMBO POP MEMORY - * Since the device is equipped with two DataRAMs, and two-plane NAND - * Flash memory array, these two component enables simultaneous program - * of 4KiB. Plane1 has only even blocks such as block0, block2, block4 - * while Plane2 has only odd blocks such as block1, block3, block5. - * So MTD regards it as 4KiB page size and 256KiB block size 64*(2*2048) - */ - -static struct mtd_partition igep3_onenand_partitions[] = { - { - .name = "X-Loader", - .offset = 0, - .size = 2 * (64*(2*2048)) - }, - { - .name = "U-Boot", - .offset = MTDPART_OFS_APPEND, - .size = 6 * (64*(2*2048)), - }, - { - .name = "Environment", - .offset = MTDPART_OFS_APPEND, - .size = 2 * (64*(2*2048)), - }, - { - .name = "Kernel", - .offset = MTDPART_OFS_APPEND, - .size = 12 * (64*(2*2048)), - }, - { - .name = "File System", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct omap_onenand_platform_data igep3_onenand_pdata = { - .parts = igep3_onenand_partitions, - .nr_parts = ARRAY_SIZE(igep3_onenand_partitions), - .onenand_setup = NULL, - .dma_channel = -1, /* disable DMA in OMAP OneNAND driver */ -}; - -static struct platform_device igep3_onenand_device = { - .name = "omap2-onenand", - .id = -1, - .dev = { - .platform_data = &igep3_onenand_pdata, - }, -}; - -static void __init igep3_flash_init(void) -{ - u8 cs = 0; - u8 onenandcs = GPMC_CS_NUM + 1; - - for (cs = 0; cs < GPMC_CS_NUM; cs++) { - u32 ret; - ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); - - /* Check if NAND/oneNAND is configured */ - if ((ret & 0xC00) == 0x800) - /* NAND found */ - pr_err("IGEP3: Unsupported NAND found\n"); - else { - ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7); - - if ((ret & 0x3F) == (ONENAND_MAP >> 24)) - /* OneNAND found */ - onenandcs = cs; - } - } - - if (onenandcs > GPMC_CS_NUM) { - pr_err("IGEP3: Unable to find configuration in GPMC\n"); - return; - } - - igep3_onenand_pdata.cs = onenandcs; - - if (platform_device_register(&igep3_onenand_device) < 0) - pr_err("IGEP3: Unable to register OneNAND device\n"); -} - -#else -static void __init igep3_flash_init(void) {} -#endif - -static struct regulator_consumer_supply igep3_vmmc1_supply = - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"); - -/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */ -static struct regulator_init_data igep3_vmmc1 = { - .constraints = { - .min_uV = 1850000, - .max_uV = 3150000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &igep3_vmmc1_supply, -}; - -static struct regulator_consumer_supply igep3_vio_supply = - REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"); - -static struct regulator_init_data igep3_vio = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = 1, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &igep3_vio_supply, -}; - -static struct regulator_consumer_supply igep3_vmmc2_supply = - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"); - -static struct regulator_init_data igep3_vmmc2 = { - .constraints = { - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .always_on = 1, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &igep3_vmmc2_supply, -}; - -static struct fixed_voltage_config igep3_vwlan = { - .supply_name = "vwlan", - .microvolts = 3300000, - .gpio = -EINVAL, - .enabled_at_boot = 1, - .init_data = &igep3_vmmc2, -}; - -static struct platform_device igep3_vwlan_device = { - .name = "reg-fixed-voltage", - .id = 0, - .dev = { - .platform_data = &igep3_vwlan, - }, -}; - -static struct omap2_hsmmc_info mmc[] = { - [0] = { - .mmc = 1, - .caps = MMC_CAP_4_BIT_DATA, - .gpio_cd = -EINVAL, - .gpio_wp = -EINVAL, - }, -#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE) - [1] = { - .mmc = 2, - .caps = MMC_CAP_4_BIT_DATA, - .gpio_cd = -EINVAL, - .gpio_wp = -EINVAL, - }, -#endif - {} /* Terminator */ -}; - -#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) -#include <linux/leds.h> - -static struct gpio_led igep3_gpio_leds[] = { - [0] = { - .name = "gpio-led:red:d0", - .gpio = IGEP3_GPIO_LED0_RED, - .default_trigger = "default-off" - }, - [1] = { - .name = "gpio-led:green:d0", - .gpio = IGEP3_GPIO_LED0_GREEN, - .default_trigger = "default-off", - }, - [2] = { - .name = "gpio-led:red:d1", - .gpio = IGEP3_GPIO_LED1_RED, - .default_trigger = "default-off", - }, - [3] = { - .name = "gpio-led:green:d1", - .default_trigger = "heartbeat", - .gpio = -EINVAL, /* gets replaced */ - }, -}; - -static struct gpio_led_platform_data igep3_led_pdata = { - .leds = igep3_gpio_leds, - .num_leds = ARRAY_SIZE(igep3_gpio_leds), -}; - -static struct platform_device igep3_led_device = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &igep3_led_pdata, - }, -}; - -static void __init igep3_leds_init(void) -{ - platform_device_register(&igep3_led_device); -} - -#else -static inline void igep3_leds_init(void) -{ - if ((gpio_request(IGEP3_GPIO_LED0_RED, "gpio-led:red:d0") == 0) && - (gpio_direction_output(IGEP3_GPIO_LED0_RED, 1) == 0)) { - gpio_export(IGEP3_GPIO_LED0_RED, 0); - gpio_set_value(IGEP3_GPIO_LED0_RED, 1); - } else - pr_warning("IGEP3: Could not obtain gpio GPIO_LED0_RED\n"); - - if ((gpio_request(IGEP3_GPIO_LED0_GREEN, "gpio-led:green:d0") == 0) && - (gpio_direction_output(IGEP3_GPIO_LED0_GREEN, 1) == 0)) { - gpio_export(IGEP3_GPIO_LED0_GREEN, 0); - gpio_set_value(IGEP3_GPIO_LED0_GREEN, 1); - } else - pr_warning("IGEP3: Could not obtain gpio GPIO_LED0_GREEN\n"); - - if ((gpio_request(IGEP3_GPIO_LED1_RED, "gpio-led:red:d1") == 0) && - (gpio_direction_output(IGEP3_GPIO_LED1_RED, 1) == 0)) { - gpio_export(IGEP3_GPIO_LED1_RED, 0); - gpio_set_value(IGEP3_GPIO_LED1_RED, 1); - } else - pr_warning("IGEP3: Could not obtain gpio GPIO_LED1_RED\n"); -} -#endif - -static int igep3_twl4030_gpio_setup(struct device *dev, - unsigned gpio, unsigned ngpio) -{ - /* gpio + 0 is "mmc0_cd" (input/IRQ) */ - mmc[0].gpio_cd = gpio + 0; - omap2_hsmmc_init(mmc); - - /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */ -#if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE) - if ((gpio_request(gpio+TWL4030_GPIO_MAX+1, "gpio-led:green:d1") == 0) - && (gpio_direction_output(gpio + TWL4030_GPIO_MAX + 1, 1) == 0)) { - gpio_export(gpio + TWL4030_GPIO_MAX + 1, 0); - gpio_set_value(gpio + TWL4030_GPIO_MAX + 1, 0); - } else - pr_warning("IGEP3: Could not obtain gpio GPIO_LED1_GREEN\n"); -#else - igep3_gpio_leds[3].gpio = gpio + TWL4030_GPIO_MAX + 1; -#endif - - return 0; -}; - -static struct twl4030_gpio_platform_data igep3_twl4030_gpio_pdata = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, - .use_leds = true, - .setup = igep3_twl4030_gpio_setup, -}; - -static struct twl4030_usb_data igep3_twl4030_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - -static struct platform_device *igep3_devices[] __initdata = { - &igep3_vwlan_device, -}; - -static void __init igep3_init_early(void) -{ - omap2_init_common_infrastructure(); - omap2_init_common_devices(m65kxxxxam_sdrc_params, - m65kxxxxam_sdrc_params); -} - -static struct twl4030_platform_data igep3_twl4030_pdata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - - /* platform_data for children goes here */ - .usb = &igep3_twl4030_usb_data, - .gpio = &igep3_twl4030_gpio_pdata, - .vmmc1 = &igep3_vmmc1, - .vio = &igep3_vio, -}; - -static struct i2c_board_info __initdata igep3_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl4030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &igep3_twl4030_pdata, - }, -}; - -static int __init igep3_i2c_init(void) -{ - omap_register_i2c_bus(1, 2600, igep3_i2c_boardinfo, - ARRAY_SIZE(igep3_i2c_boardinfo)); - - return 0; -} - -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - -#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE) - -static void __init igep3_wifi_bt_init(void) -{ - /* Configure MUX values for W-LAN + Bluetooth GPIO's */ - omap_mux_init_gpio(IGEP3_GPIO_WIFI_NPD, OMAP_PIN_OUTPUT); - omap_mux_init_gpio(IGEP3_GPIO_WIFI_NRESET, OMAP_PIN_OUTPUT); - omap_mux_init_gpio(IGEP3_GPIO_BT_NRESET, OMAP_PIN_OUTPUT); - - /* Set GPIO's for W-LAN + Bluetooth combo module */ - if ((gpio_request(IGEP3_GPIO_WIFI_NPD, "GPIO_WIFI_NPD") == 0) && - (gpio_direction_output(IGEP3_GPIO_WIFI_NPD, 1) == 0)) { - gpio_export(IGEP3_GPIO_WIFI_NPD, 0); - } else - pr_warning("IGEP3: Could not obtain gpio GPIO_WIFI_NPD\n"); - - if ((gpio_request(IGEP3_GPIO_WIFI_NRESET, "GPIO_WIFI_NRESET") == 0) && - (gpio_direction_output(IGEP3_GPIO_WIFI_NRESET, 1) == 0)) { - gpio_export(IGEP3_GPIO_WIFI_NRESET, 0); - gpio_set_value(IGEP3_GPIO_WIFI_NRESET, 0); - udelay(10); - gpio_set_value(IGEP3_GPIO_WIFI_NRESET, 1); - } else - pr_warning("IGEP3: Could not obtain gpio GPIO_WIFI_NRESET\n"); - - if ((gpio_request(IGEP3_GPIO_BT_NRESET, "GPIO_BT_NRESET") == 0) && - (gpio_direction_output(IGEP3_GPIO_BT_NRESET, 1) == 0)) { - gpio_export(IGEP3_GPIO_BT_NRESET, 0); - } else - pr_warning("IGEP3: Could not obtain gpio GPIO_BT_NRESET\n"); -} -#else -void __init igep3_wifi_bt_init(void) {} -#endif - -static const struct usbhs_omap_board_data usbhs_bdata __initconst = { - .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, - .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = IGEP3_GPIO_USBH_NRESET, - .reset_gpio_port[2] = -EINVAL, -}; - -#ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { - OMAP3_MUX(I2C2_SDA, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#endif - -static void __init igep3_init(void) -{ - omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); - - /* Register I2C busses and drivers */ - igep3_i2c_init(); - platform_add_devices(igep3_devices, ARRAY_SIZE(igep3_devices)); - omap_serial_init(); - usb_musb_init(&musb_board_data); - usbhs_init(&usbhs_bdata); - - igep3_flash_init(); - igep3_leds_init(); - - /* - * WLAN-BT combo module from MuRata which has a Marvell WLAN - * (88W8686) + CSR Bluetooth chipset. Uses SDIO interface. - */ - igep3_wifi_bt_init(); - -} - -MACHINE_START(IGEP0030, "IGEP OMAP3 module") - .boot_params = 0x80000100, - .reserve = omap_reserve, - .map_io = omap3_map_io, - .init_early = igep3_init_early, - .init_irq = omap_init_irq, - .init_machine = igep3_init, - .timer = &omap_timer, -MACHINE_END |