1 files changed, 135 insertions, 13 deletions

diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 59ca03b0e691..30af3351c2d6 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -13,13 +13,16 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/err.h>
+#include <linux/opp.h>
 
 #include <plat/omap-pm.h>
 #include <plat/omap_device.h>
 #include <plat/common.h>
 
-#include <plat/powerdomain.h>
-#include <plat/clockdomain.h>
+#include "voltage.h"
+#include "powerdomain.h"
+#include "clockdomain.h"
+#include "pm.h"
 
 static struct omap_device_pm_latency *pm_lats;
 
@@ -80,7 +83,9 @@ static int _init_omap_device(char *name, struct device **new_dev)
 static void omap2_init_processor_devices(void)
 {
 	_init_omap_device("mpu", &mpu_dev);
-	_init_omap_device("iva", &iva_dev);
+	if (omap3_has_iva())
+		_init_omap_device("iva", &iva_dev);
+
 	if (cpu_is_omap44xx()) {
 		_init_omap_device("l3_main_1", &l3_dev);
 		_init_omap_device("dsp", &dsp_dev);
@@ -89,10 +94,13 @@ static void omap2_init_processor_devices(void)
 	}
 }
 
+/* Types of sleep_switch used in omap_set_pwrdm_state */
+#define FORCEWAKEUP_SWITCH	0
+#define LOWPOWERSTATE_SWITCH	1
+
 /*
  * This sets pwrdm state (other than mpu & core. Currently only ON &
- * RET are supported. Function is assuming that clkdm doesn't have
- * hw_sup mode enabled.
+ * RET are supported.
  */
 int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
 {
@@ -114,9 +122,14 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
 		return ret;
 
 	if (pwrdm_read_pwrst(pwrdm) < PWRDM_POWER_ON) {
-		omap2_clkdm_wakeup(pwrdm->pwrdm_clkdms[0]);
-		sleep_switch = 1;
-		pwrdm_wait_transition(pwrdm);
+		if ((pwrdm_read_pwrst(pwrdm) > state) &&
+			(pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE)) {
+			sleep_switch = LOWPOWERSTATE_SWITCH;
+		} else {
+			clkdm_wakeup(pwrdm->pwrdm_clkdms[0]);
+			pwrdm_wait_transition(pwrdm);
+			sleep_switch = FORCEWAKEUP_SWITCH;
+		}
 	}
 
 	ret = pwrdm_set_next_pwrst(pwrdm, state);
@@ -126,16 +139,106 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
 		goto err;
 	}
 
-	if (sleep_switch) {
-		omap2_clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]);
-		pwrdm_wait_transition(pwrdm);
-		pwrdm_state_switch(pwrdm);
+	switch (sleep_switch) {
+	case FORCEWAKEUP_SWITCH:
+		if (pwrdm->pwrdm_clkdms[0]->flags & CLKDM_CAN_ENABLE_AUTO)
+			clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]);
+		else
+			clkdm_sleep(pwrdm->pwrdm_clkdms[0]);
+		break;
+	case LOWPOWERSTATE_SWITCH:
+		pwrdm_set_lowpwrstchange(pwrdm);
+		break;
+	default:
+		return ret;
 	}
 
+	pwrdm_wait_transition(pwrdm);
+	pwrdm_state_switch(pwrdm);
 err:
 	return ret;
 }
 
+/*
+ * This API is to be called during init to put the various voltage
+ * domains to the voltage as per the opp table. Typically we boot up
+ * at the nominal voltage. So this function finds out the rate of
+ * the clock associated with the voltage domain, finds out the correct
+ * opp entry and puts the voltage domain to the voltage specifies
+ * in the opp entry
+ */
+static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
+						struct device *dev)
+{
+	struct voltagedomain *voltdm;
+	struct clk *clk;
+	struct opp *opp;
+	unsigned long freq, bootup_volt;
+
+	if (!vdd_name || !clk_name || !dev) {
+		printk(KERN_ERR "%s: Invalid parameters!\n", __func__);
+		goto exit;
+	}
+
+	voltdm = omap_voltage_domain_lookup(vdd_name);
+	if (IS_ERR(voltdm)) {
+		printk(KERN_ERR "%s: Unable to get vdd pointer for vdd_%s\n",
+			__func__, vdd_name);
+		goto exit;
+	}
+
+	clk =  clk_get(NULL, clk_name);
+	if (IS_ERR(clk)) {
+		printk(KERN_ERR "%s: unable to get clk %s\n",
+			__func__, clk_name);
+		goto exit;
+	}
+
+	freq = clk->rate;
+	clk_put(clk);
+
+	opp = opp_find_freq_ceil(dev, &freq);
+	if (IS_ERR(opp)) {
+		printk(KERN_ERR "%s: unable to find boot up OPP for vdd_%s\n",
+			__func__, vdd_name);
+		goto exit;
+	}
+
+	bootup_volt = opp_get_voltage(opp);
+	if (!bootup_volt) {
+		printk(KERN_ERR "%s: unable to find voltage corresponding"
+			"to the bootup OPP for vdd_%s\n", __func__, vdd_name);
+		goto exit;
+	}
+
+	omap_voltage_scale_vdd(voltdm, bootup_volt);
+	return 0;
+
+exit:
+	printk(KERN_ERR "%s: Unable to put vdd_%s to its init voltage\n\n",
+		__func__, vdd_name);
+	return -EINVAL;
+}
+
+static void __init omap3_init_voltages(void)
+{
+	if (!cpu_is_omap34xx())
+		return;
+
+	omap2_set_init_voltage("mpu", "dpll1_ck", mpu_dev);
+	omap2_set_init_voltage("core", "l3_ick", l3_dev);
+}
+
+static void __init omap4_init_voltages(void)
+{
+	if (!cpu_is_omap44xx())
+		return;
+
+	omap2_set_init_voltage("mpu", "dpll_mpu_ck", mpu_dev);
+	omap2_set_init_voltage("core", "l3_div_ck", l3_dev);
+	omap2_set_init_voltage("iva", "dpll_iva_m5x2_ck", iva_dev);
+}
+
 static int __init omap2_common_pm_init(void)
 {
 	omap2_init_processor_devices();
@@ -143,5 +246,24 @@ static int __init omap2_common_pm_init(void)
 
 	return 0;
 }
-device_initcall(omap2_common_pm_init);
+postcore_initcall(omap2_common_pm_init);
+
+static int __init omap2_common_pm_late_init(void)
+{
+	/* Init the OMAP TWL parameters */
+	omap3_twl_init();
+	omap4_twl_init();
+
+	/* Init the voltage layer */
+	omap_voltage_late_init();
 
+	/* Initialize the voltages */
+	omap3_init_voltages();
+	omap4_init_voltages();
+
+	/* Smartreflex device init */
+	omap_devinit_smartreflex();
+
+	return 0;
+}
+late_initcall(omap2_common_pm_late_init);