diff options
Diffstat (limited to 'arch/arm/mach-orion/ts209-setup.c')
-rw-r--r-- | arch/arm/mach-orion/ts209-setup.c | 361 |
1 files changed, 0 insertions, 361 deletions
diff --git a/arch/arm/mach-orion/ts209-setup.c b/arch/arm/mach-orion/ts209-setup.c deleted file mode 100644 index 45764dad16d0..000000000000 --- a/arch/arm/mach-orion/ts209-setup.c +++ /dev/null @@ -1,361 +0,0 @@ -/* - * QNAP TS-109/TS-209 Board Setup - * - * Maintainer: Byron Bradley <byron.bbradley@gmail.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/pci.h> -#include <linux/irq.h> -#include <linux/mtd/physmap.h> -#include <linux/mtd/nand.h> -#include <linux/mv643xx_eth.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> -#include <linux/i2c.h> -#include <linux/serial_reg.h> -#include <linux/ata_platform.h> -#include <asm/mach-types.h> -#include <asm/gpio.h> -#include <asm/mach/arch.h> -#include <asm/mach/pci.h> -#include <asm/arch/orion.h> -#include <asm/arch/platform.h> -#include "common.h" - -#define QNAP_TS209_NOR_BOOT_BASE 0xf4000000 -#define QNAP_TS209_NOR_BOOT_SIZE SZ_8M - -/**************************************************************************** - * 8MiB NOR flash. The struct mtd_partition is not in the same order as the - * partitions on the device because we want to keep compatability with - * existing QNAP firmware. - * - * Layout as used by QNAP: - * [2] 0x00000000-0x00200000 : "Kernel" - * [3] 0x00200000-0x00600000 : "RootFS1" - * [4] 0x00600000-0x00700000 : "RootFS2" - * [6] 0x00700000-0x00760000 : "NAS Config" (read-only) - * [5] 0x00760000-0x00780000 : "U-Boot Config" - * [1] 0x00780000-0x00800000 : "U-Boot" (read-only) - ***************************************************************************/ -static struct mtd_partition qnap_ts209_partitions[] = { - { - .name = "U-Boot", - .size = 0x00080000, - .offset = 0x00780000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "Kernel", - .size = 0x00200000, - .offset = 0, - }, { - .name = "RootFS1", - .size = 0x00400000, - .offset = 0x00200000, - }, { - .name = "RootFS2", - .size = 0x00100000, - .offset = 0x00600000, - }, { - .name = "U-Boot Config", - .size = 0x00020000, - .offset = 0x00760000, - }, { - .name = "NAS Config", - .size = 0x00060000, - .offset = 0x00700000, - .mask_flags = MTD_WRITEABLE, - } -}; - -static struct physmap_flash_data qnap_ts209_nor_flash_data = { - .width = 1, - .parts = qnap_ts209_partitions, - .nr_parts = ARRAY_SIZE(qnap_ts209_partitions) -}; - -static struct resource qnap_ts209_nor_flash_resource = { - .flags = IORESOURCE_MEM, - .start = QNAP_TS209_NOR_BOOT_BASE, - .end = QNAP_TS209_NOR_BOOT_BASE + QNAP_TS209_NOR_BOOT_SIZE - 1, -}; - -static struct platform_device qnap_ts209_nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { .platform_data = &qnap_ts209_nor_flash_data, }, - .resource = &qnap_ts209_nor_flash_resource, - .num_resources = 1, -}; - -/***************************************************************************** - * PCI - ****************************************************************************/ - -#define QNAP_TS209_PCI_SLOT0_OFFS 7 -#define QNAP_TS209_PCI_SLOT0_IRQ_PIN 6 -#define QNAP_TS209_PCI_SLOT1_IRQ_PIN 7 - -void __init qnap_ts209_pci_preinit(void) -{ - int pin; - - /* - * Configure PCI GPIO IRQ pins - */ - pin = QNAP_TS209_PCI_SLOT0_IRQ_PIN; - if (gpio_request(pin, "PCI Int1") == 0) { - if (gpio_direction_input(pin) == 0) { - set_irq_type(gpio_to_irq(pin), IRQT_LOW); - } else { - printk(KERN_ERR "qnap_ts209_pci_preinit failed to " - "set_irq_type pin %d\n", pin); - gpio_free(pin); - } - } else { - printk(KERN_ERR "qnap_ts209_pci_preinit failed to gpio_request " - "%d\n", pin); - } - - pin = QNAP_TS209_PCI_SLOT1_IRQ_PIN; - if (gpio_request(pin, "PCI Int2") == 0) { - if (gpio_direction_input(pin) == 0) { - set_irq_type(gpio_to_irq(pin), IRQT_LOW); - } else { - printk(KERN_ERR "qnap_ts209_pci_preinit failed " - "to set_irq_type pin %d\n", pin); - gpio_free(pin); - } - } else { - printk(KERN_ERR "qnap_ts209_pci_preinit failed to gpio_request " - "%d\n", pin); - } -} - -static int __init qnap_ts209_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -{ - /* - * PCIE IRQ is connected internally (not GPIO) - */ - if (dev->bus->number == orion_pcie_local_bus_nr()) - return IRQ_ORION_PCIE0_INT; - - /* - * PCI IRQs are connected via GPIOs - */ - switch (slot - QNAP_TS209_PCI_SLOT0_OFFS) { - case 0: - return gpio_to_irq(QNAP_TS209_PCI_SLOT0_IRQ_PIN); - case 1: - return gpio_to_irq(QNAP_TS209_PCI_SLOT1_IRQ_PIN); - default: - return -1; - } -} - -static struct hw_pci qnap_ts209_pci __initdata = { - .nr_controllers = 2, - .preinit = qnap_ts209_pci_preinit, - .swizzle = pci_std_swizzle, - .setup = orion_pci_sys_setup, - .scan = orion_pci_sys_scan_bus, - .map_irq = qnap_ts209_pci_map_irq, -}; - -static int __init qnap_ts209_pci_init(void) -{ - if (machine_is_ts_x09()) - pci_common_init(&qnap_ts209_pci); - - return 0; -} - -subsys_initcall(qnap_ts209_pci_init); - -/***************************************************************************** - * Ethernet - ****************************************************************************/ - -static struct mv643xx_eth_platform_data qnap_ts209_eth_data = { - .phy_addr = 8, - .force_phy_addr = 1, -}; - -/***************************************************************************** - * RTC S35390A on I2C bus - ****************************************************************************/ - -#define TS209_RTC_GPIO 3 - -static struct i2c_board_info __initdata qnap_ts209_i2c_rtc = { - .driver_name = "rtc-s35390a", - .addr = 0x30, - .irq = 0, -}; - -/**************************************************************************** - * GPIO Attached Keys - * Power button is attached to the PIC microcontroller - ****************************************************************************/ - -#define QNAP_TS209_GPIO_KEY_MEDIA 1 -#define QNAP_TS209_GPIO_KEY_RESET 2 - -static struct gpio_keys_button qnap_ts209_buttons[] = { - { - .code = KEY_RESTART, - .gpio = QNAP_TS209_GPIO_KEY_MEDIA, - .desc = "USB Copy Button", - .active_low = 1, - }, - { - .code = KEY_POWER, - .gpio = QNAP_TS209_GPIO_KEY_RESET, - .desc = "Reset Button", - .active_low = 1, - } -}; - -static struct gpio_keys_platform_data qnap_ts209_button_data = { - .buttons = qnap_ts209_buttons, - .nbuttons = ARRAY_SIZE(qnap_ts209_buttons), -}; - -static struct platform_device qnap_ts209_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { .platform_data = &qnap_ts209_button_data, }, -}; - -/***************************************************************************** - * SATA - ****************************************************************************/ -static struct mv_sata_platform_data qnap_ts209_sata_data = { - .n_ports = 2, -}; - -/***************************************************************************** - - * General Setup - ****************************************************************************/ - -static struct platform_device *qnap_ts209_devices[] __initdata = { - &qnap_ts209_nor_flash, - &qnap_ts209_button_device, -}; - -/* - * QNAP TS-[12]09 specific power off method via UART1-attached PIC - */ - -#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2)) - -static void qnap_ts209_power_off(void) -{ - /* 19200 baud divisor */ - const unsigned divisor = ((ORION_TCLK + (8 * 19200)) / (16 * 19200)); - - pr_info("%s: triggering power-off...\n", __func__); - - /* hijack uart1 and reset into sane state (19200,8n1) */ - orion_write(UART1_REG(LCR), 0x83); - orion_write(UART1_REG(DLL), divisor & 0xff); - orion_write(UART1_REG(DLM), (divisor >> 8) & 0xff); - orion_write(UART1_REG(LCR), 0x03); - orion_write(UART1_REG(IER), 0x00); - orion_write(UART1_REG(FCR), 0x00); - orion_write(UART1_REG(MCR), 0x00); - - /* send the power-off command 'A' to PIC */ - orion_write(UART1_REG(TX), 'A'); -} - -static void __init qnap_ts209_init(void) -{ - /* - * Setup basic Orion functions. Need to be called early. - */ - orion_init(); - - /* - * Setup flash mapping - */ - orion_setup_cpu_win(ORION_DEV_BOOT, QNAP_TS209_NOR_BOOT_BASE, - QNAP_TS209_NOR_BOOT_SIZE, -1); - - /* - * Open a special address decode windows for the PCIE WA. - */ - orion_write(ORION_REGS_VIRT_BASE | 0x20074, ORION_PCIE_WA_PHYS_BASE); - orion_write(ORION_REGS_VIRT_BASE | 0x20070, (0x7941 | - (((ORION_PCIE_WA_SIZE >> 16) - 1)) << 16)); - - /* - * Setup Multiplexing Pins -- - * MPP[0] Reserved - * MPP[1] USB copy button (0 active) - * MPP[2] Load defaults button (0 active) - * MPP[3] GPIO RTC - * MPP[4-5] Reserved - * MPP[6] PCI Int A - * MPP[7] PCI Int B - * MPP[8-11] Reserved - * MPP[12] SATA 0 presence - * MPP[13] SATA 1 presence - * MPP[14] SATA 0 active - * MPP[15] SATA 1 active - * MPP[16] UART1 RXD - * MPP[17] UART1 TXD - * MPP[18] SW_RST (0 active) - * MPP[19] Reserved - * MPP[20] PCI clock 0 - * MPP[21] PCI clock 1 - * MPP[22] USB 0 over current - * MPP[23-25] Reserved - */ - orion_write(MPP_0_7_CTRL, 0x3); - orion_write(MPP_8_15_CTRL, 0x55550000); - orion_write(MPP_16_19_CTRL, 0x5500); - orion_gpio_set_valid_pins(0x3cc0fff); - - /* register ts209 specific power-off method */ - pm_power_off = qnap_ts209_power_off; - - platform_add_devices(qnap_ts209_devices, - ARRAY_SIZE(qnap_ts209_devices)); - - /* Get RTC IRQ and register the chip */ - if (gpio_request(TS209_RTC_GPIO, "rtc") == 0) { - if (gpio_direction_input(TS209_RTC_GPIO) == 0) - qnap_ts209_i2c_rtc.irq = gpio_to_irq(TS209_RTC_GPIO); - else - gpio_free(TS209_RTC_GPIO); - } - if (qnap_ts209_i2c_rtc.irq == 0) - pr_warning("qnap_ts209_init: failed to get RTC IRQ\n"); - i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1); - - orion_eth_init(&qnap_ts209_eth_data); - orion_sata_init(&qnap_ts209_sata_data); -} - -MACHINE_START(TS209, "QNAP TS-109/TS-209") - /* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */ - .phys_io = ORION_REGS_PHYS_BASE, - .io_pg_offst = ((ORION_REGS_VIRT_BASE) >> 18) & 0xFFFC, - .boot_params = 0x00000100, - .init_machine = qnap_ts209_init, - .map_io = orion_map_io, - .init_irq = orion_init_irq, - .timer = &orion_timer, - .fixup = tag_fixup_mem32, -MACHINE_END |