summaryrefslogtreecommitdiff
path: root/arch/arm/mach-s5pv310/platsmp.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-s5pv310/platsmp.c')
-rw-r--r--arch/arm/mach-s5pv310/platsmp.c192
1 files changed, 0 insertions, 192 deletions
diff --git a/arch/arm/mach-s5pv310/platsmp.c b/arch/arm/mach-s5pv310/platsmp.c
deleted file mode 100644
index d357c198edee..000000000000
--- a/arch/arm/mach-s5pv310/platsmp.c
+++ /dev/null
@@ -1,192 +0,0 @@
-/* linux/arch/arm/mach-s5pv310/platsmp.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Cloned from linux/arch/arm/mach-vexpress/platsmp.c
- *
- * Copyright (C) 2002 ARM Ltd.
- * All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/jiffies.h>
-#include <linux/smp.h>
-#include <linux/io.h>
-
-#include <asm/cacheflush.h>
-#include <asm/localtimer.h>
-#include <asm/smp_scu.h>
-#include <asm/unified.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-clock.h>
-
-extern void s5pv310_secondary_startup(void);
-
-/*
- * control for which core is the next to come out of the secondary
- * boot "holding pen"
- */
-
-volatile int __cpuinitdata pen_release = -1;
-
-static void __iomem *scu_base_addr(void)
-{
- return (void __iomem *)(S5P_VA_SCU);
-}
-
-static DEFINE_SPINLOCK(boot_lock);
-
-void __cpuinit platform_secondary_init(unsigned int cpu)
-{
- trace_hardirqs_off();
-
- /*
- * if any interrupts are already enabled for the primary
- * core (e.g. timer irq), then they will not have been enabled
- * for us: do so
- */
- gic_cpu_init(0, gic_cpu_base_addr);
-
- /*
- * let the primary processor know we're out of the
- * pen, then head off into the C entry point
- */
- pen_release = -1;
- smp_wmb();
-
- /*
- * Synchronise with the boot thread.
- */
- spin_lock(&boot_lock);
- spin_unlock(&boot_lock);
-}
-
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
-{
- unsigned long timeout;
-
- /*
- * Set synchronisation state between this boot processor
- * and the secondary one
- */
- spin_lock(&boot_lock);
-
- /*
- * The secondary processor is waiting to be released from
- * the holding pen - release it, then wait for it to flag
- * that it has been released by resetting pen_release.
- *
- * Note that "pen_release" is the hardware CPU ID, whereas
- * "cpu" is Linux's internal ID.
- */
- pen_release = cpu;
- __cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
- outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
-
- /*
- * Send the secondary CPU a soft interrupt, thereby causing
- * the boot monitor to read the system wide flags register,
- * and branch to the address found there.
- */
- smp_cross_call(cpumask_of(cpu));
-
- timeout = jiffies + (1 * HZ);
- while (time_before(jiffies, timeout)) {
- smp_rmb();
- if (pen_release == -1)
- break;
-
- udelay(10);
- }
-
- /*
- * now the secondary core is starting up let it run its
- * calibrations, then wait for it to finish
- */
- spin_unlock(&boot_lock);
-
- return pen_release != -1 ? -ENOSYS : 0;
-}
-
-/*
- * Initialise the CPU possible map early - this describes the CPUs
- * which may be present or become present in the system.
- */
-
-void __init smp_init_cpus(void)
-{
- void __iomem *scu_base = scu_base_addr();
- unsigned int i, ncores;
-
- ncores = scu_base ? scu_get_core_count(scu_base) : 1;
-
- /* sanity check */
- if (ncores == 0) {
- printk(KERN_ERR
- "S5PV310: strange CM count of 0? Default to 1\n");
-
- ncores = 1;
- }
-
- if (ncores > NR_CPUS) {
- printk(KERN_WARNING
- "S5PV310: no. of cores (%d) greater than configured "
- "maximum of %d - clipping\n",
- ncores, NR_CPUS);
- ncores = NR_CPUS;
- }
-
- for (i = 0; i < ncores; i++)
- set_cpu_possible(i, true);
-}
-
-void __init smp_prepare_cpus(unsigned int max_cpus)
-{
- unsigned int ncores = num_possible_cpus();
- unsigned int cpu = smp_processor_id();
- int i;
-
- smp_store_cpu_info(cpu);
-
- /* are we trying to boot more cores than exist? */
- if (max_cpus > ncores)
- max_cpus = ncores;
-
- /*
- * Initialise the present map, which describes the set of CPUs
- * actually populated at the present time.
- */
- for (i = 0; i < max_cpus; i++)
- set_cpu_present(i, true);
-
- /*
- * Initialise the SCU if there are more than one CPU and let
- * them know where to start.
- */
- if (max_cpus > 1) {
- /*
- * Enable the local timer or broadcast device for the
- * boot CPU, but only if we have more than one CPU.
- */
- percpu_timer_setup();
-
- scu_enable(scu_base_addr());
-
- /*
- * Write the address of secondary startup into the
- * system-wide flags register. The boot monitor waits
- * until it receives a soft interrupt, and then the
- * secondary CPU branches to this address.
- */
- __raw_writel(BSYM(virt_to_phys(s5pv310_secondary_startup)), S5P_VA_SYSRAM);
- }
-}