summaryrefslogtreecommitdiff
path: root/arch/arm/mach-shmobile/board-ap4evb.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-shmobile/board-ap4evb.c')
-rw-r--r--arch/arm/mach-shmobile/board-ap4evb.c167
1 files changed, 146 insertions, 21 deletions
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 46ca4d4abf91..d440e5f456ad 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -163,11 +163,13 @@ static struct mtd_partition nor_flash_partitions[] = {
.name = "loader",
.offset = 0x00000000,
.size = 512 * 1024,
+ .mask_flags = MTD_WRITEABLE,
},
{
.name = "bootenv",
.offset = MTDPART_OFS_APPEND,
.size = 512 * 1024,
+ .mask_flags = MTD_WRITEABLE,
},
{
.name = "kernel_ro",
@@ -565,12 +567,143 @@ static struct platform_device *qhd_devices[] __initdata = {
/* FSI */
#define IRQ_FSI evt2irq(0x1840)
+static int __fsi_set_rate(struct clk *clk, long rate, int enable)
+{
+ int ret = 0;
+
+ if (rate <= 0)
+ return ret;
+
+ if (enable) {
+ ret = clk_set_rate(clk, rate);
+ if (0 == ret)
+ ret = clk_enable(clk);
+ } else {
+ clk_disable(clk);
+ }
+
+ return ret;
+}
+
+static int __fsi_set_round_rate(struct clk *clk, long rate, int enable)
+{
+ return __fsi_set_rate(clk, clk_round_rate(clk, rate), enable);
+}
+
+static int fsi_ak4642_set_rate(struct device *dev, int rate, int enable)
+{
+ struct clk *fsia_ick;
+ struct clk *fsiack;
+ int ret = -EIO;
+
+ fsia_ick = clk_get(dev, "icka");
+ if (IS_ERR(fsia_ick))
+ return PTR_ERR(fsia_ick);
+
+ /*
+ * FSIACK is connected to AK4642,
+ * and use external clock pin from it.
+ * it is parent of fsia_ick now.
+ */
+ fsiack = clk_get_parent(fsia_ick);
+ if (!fsiack)
+ goto fsia_ick_out;
+
+ /*
+ * we get 1/1 divided clock by setting same rate to fsiack and fsia_ick
+ *
+ ** FIXME **
+ * Because the freq_table of external clk (fsiack) are all 0,
+ * the return value of clk_round_rate became 0.
+ * So, it use __fsi_set_rate here.
+ */
+ ret = __fsi_set_rate(fsiack, rate, enable);
+ if (ret < 0)
+ goto fsiack_out;
+
+ ret = __fsi_set_round_rate(fsia_ick, rate, enable);
+ if ((ret < 0) && enable)
+ __fsi_set_round_rate(fsiack, rate, 0); /* disable FSI ACK */
+
+fsiack_out:
+ clk_put(fsiack);
+
+fsia_ick_out:
+ clk_put(fsia_ick);
+
+ return 0;
+}
+
+static int fsi_hdmi_set_rate(struct device *dev, int rate, int enable)
+{
+ struct clk *fsib_clk;
+ struct clk *fdiv_clk = &sh7372_fsidivb_clk;
+ long fsib_rate = 0;
+ long fdiv_rate = 0;
+ int ackmd_bpfmd;
+ int ret;
+
+ switch (rate) {
+ case 44100:
+ fsib_rate = rate * 256;
+ ackmd_bpfmd = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
+ break;
+ case 48000:
+ fsib_rate = 85428000; /* around 48kHz x 256 x 7 */
+ fdiv_rate = rate * 256;
+ ackmd_bpfmd = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
+ break;
+ default:
+ pr_err("unsupported rate in FSI2 port B\n");
+ return -EINVAL;
+ }
+
+ /* FSI B setting */
+ fsib_clk = clk_get(dev, "ickb");
+ if (IS_ERR(fsib_clk))
+ return -EIO;
+
+ ret = __fsi_set_round_rate(fsib_clk, fsib_rate, enable);
+ clk_put(fsib_clk);
+ if (ret < 0)
+ return ret;
+
+ /* FSI DIV setting */
+ ret = __fsi_set_round_rate(fdiv_clk, fdiv_rate, enable);
+ if (ret < 0) {
+ /* disable FSI B */
+ if (enable)
+ __fsi_set_round_rate(fsib_clk, fsib_rate, 0);
+ return ret;
+ }
+
+ return ackmd_bpfmd;
+}
+
+static int fsi_set_rate(struct device *dev, int is_porta, int rate, int enable)
+{
+ int ret;
+
+ if (is_porta)
+ ret = fsi_ak4642_set_rate(dev, rate, enable);
+ else
+ ret = fsi_hdmi_set_rate(dev, rate, enable);
+
+ return ret;
+}
+
static struct sh_fsi_platform_info fsi_info = {
.porta_flags = SH_FSI_BRS_INV |
SH_FSI_OUT_SLAVE_MODE |
SH_FSI_IN_SLAVE_MODE |
SH_FSI_OFMT(PCM) |
SH_FSI_IFMT(PCM),
+
+ .portb_flags = SH_FSI_BRS_INV |
+ SH_FSI_BRM_INV |
+ SH_FSI_LRS_INV |
+ SH_FSI_OFMT(SPDIF),
+ .set_rate = fsi_set_rate,
};
static struct resource fsi_resources[] = {
@@ -634,6 +767,7 @@ static struct platform_device lcdc1_device = {
static struct sh_mobile_hdmi_info hdmi_info = {
.lcd_chan = &sh_mobile_lcdc1_info.ch[0],
.lcd_dev = &lcdc1_device.dev,
+ .flags = HDMI_SND_SRC_SPDIF,
};
static struct resource hdmi_resources[] = {
@@ -835,6 +969,11 @@ static int __init hdmi_init_pm_clock(void)
goto out;
}
+ ret = clk_enable(&sh7372_pllc2_clk);
+ if (ret < 0) {
+ pr_err("Cannot enable pllc2 clock\n");
+ goto out;
+ }
pr_debug("PLLC2 set frequency %lu\n", rate);
ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk);
@@ -851,23 +990,11 @@ out:
device_initcall(hdmi_init_pm_clock);
-#define FSIACK_DUMMY_RATE 48000
static int __init fsi_init_pm_clock(void)
{
struct clk *fsia_ick;
int ret;
- /*
- * FSIACK is connected to AK4642,
- * and the rate is depend on playing sound rate.
- * So, set dummy rate (= 48k) here
- */
- ret = clk_set_rate(&sh7372_fsiack_clk, FSIACK_DUMMY_RATE);
- if (ret < 0) {
- pr_err("Cannot set FSIACK dummy rate: %d\n", ret);
- return ret;
- }
-
fsia_ick = clk_get(&fsi_device.dev, "icka");
if (IS_ERR(fsia_ick)) {
ret = PTR_ERR(fsia_ick);
@@ -876,16 +1003,9 @@ static int __init fsi_init_pm_clock(void)
}
ret = clk_set_parent(fsia_ick, &sh7372_fsiack_clk);
- if (ret < 0) {
- pr_err("Cannot set FSI-A parent: %d\n", ret);
- goto out;
- }
-
- ret = clk_set_rate(fsia_ick, FSIACK_DUMMY_RATE);
if (ret < 0)
- pr_err("Cannot set FSI-A rate: %d\n", ret);
+ pr_err("Cannot set FSI-A parent: %d\n", ret);
-out:
clk_put(fsia_ick);
return ret;
@@ -992,6 +1112,7 @@ static void __init ap4evb_map_io(void)
#define GPIO_PORT9CR 0xE6051009
#define GPIO_PORT10CR 0xE605100A
+#define USCCR1 0xE6058144
static void __init ap4evb_init(void)
{
u32 srcr4;
@@ -1062,7 +1183,7 @@ static void __init ap4evb_init(void)
/* setup USB phy */
__raw_writew(0x8a0a, 0xE6058130); /* USBCR2 */
- /* enable FSI2 */
+ /* enable FSI2 port A (ak4643) */
gpio_request(GPIO_FN_FSIAIBT, NULL);
gpio_request(GPIO_FN_FSIAILR, NULL);
gpio_request(GPIO_FN_FSIAISLD, NULL);
@@ -1079,6 +1200,10 @@ static void __init ap4evb_init(void)
gpio_request(GPIO_PORT41, NULL);
gpio_direction_input(GPIO_PORT41);
+ /* setup FSI2 port B (HDMI) */
+ gpio_request(GPIO_FN_FSIBCK, NULL);
+ __raw_writew(__raw_readw(USCCR1) & ~(1 << 6), USCCR1); /* use SPDIF */
+
/* set SPU2 clock to 119.6 MHz */
clk = clk_get(NULL, "spu_clk");
if (!IS_ERR(clk)) {