diff options
Diffstat (limited to 'arch/arm/mach-spear3xx/spear3xx.c')
| -rw-r--r-- | arch/arm/mach-spear3xx/spear3xx.c | 59 |
1 files changed, 34 insertions, 25 deletions
diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c index e87313aeae20..d3ba8ca1bc59 100644 --- a/arch/arm/mach-spear3xx/spear3xx.c +++ b/arch/arm/mach-spear3xx/spear3xx.c @@ -19,10 +19,10 @@ #include <asm/irq.h> #include <asm/mach/arch.h> #include <mach/generic.h> -#include <mach/spear.h> +#include <mach/hardware.h> /* Add spear3xx machines common devices here */ -/* gpio device registeration */ +/* gpio device registration */ static struct pl061_platform_data gpio_plat_data = { .gpio_base = 0, .irq_base = SPEAR_GPIO_INT_BASE, @@ -35,20 +35,20 @@ struct amba_device gpio_device = { }, .res = { .start = SPEAR3XX_ICM3_GPIO_BASE, - .end = SPEAR3XX_ICM3_GPIO_BASE + SPEAR3XX_ICM3_GPIO_SIZE - 1, + .end = SPEAR3XX_ICM3_GPIO_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, .irq = {IRQ_BASIC_GPIO, NO_IRQ}, }; -/* uart device registeration */ +/* uart device registration */ struct amba_device uart_device = { .dev = { .init_name = "uart", }, .res = { .start = SPEAR3XX_ICM1_UART_BASE, - .end = SPEAR3XX_ICM1_UART_BASE + SPEAR3XX_ICM1_UART_SIZE - 1, + .end = SPEAR3XX_ICM1_UART_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, .irq = {IRQ_UART, NO_IRQ}, @@ -71,22 +71,22 @@ struct map_desc spear3xx_io_desc[] __initdata = { { .virtual = VA_SPEAR3XX_ICM1_UART_BASE, .pfn = __phys_to_pfn(SPEAR3XX_ICM1_UART_BASE), - .length = SPEAR3XX_ICM1_UART_SIZE, + .length = SZ_4K, .type = MT_DEVICE }, { .virtual = VA_SPEAR3XX_ML1_VIC_BASE, .pfn = __phys_to_pfn(SPEAR3XX_ML1_VIC_BASE), - .length = SPEAR3XX_ML1_VIC_SIZE, + .length = SZ_4K, .type = MT_DEVICE }, { .virtual = VA_SPEAR3XX_ICM3_SYS_CTRL_BASE, .pfn = __phys_to_pfn(SPEAR3XX_ICM3_SYS_CTRL_BASE), - .length = SPEAR3XX_ICM3_SYS_CTRL_SIZE, + .length = SZ_4K, .type = MT_DEVICE }, { .virtual = VA_SPEAR3XX_ICM3_MISC_REG_BASE, .pfn = __phys_to_pfn(SPEAR3XX_ICM3_MISC_REG_BASE), - .length = SPEAR3XX_ICM3_MISC_REG_SIZE, + .length = SZ_4K, .type = MT_DEVICE }, }; @@ -523,26 +523,35 @@ struct pmx_dev pmx_plgpio_45_46_49_50 = { .mode_count = ARRAY_SIZE(pmx_plgpio_45_46_49_50_modes), .enb_on_reset = 1, }; +#endif /* CONFIG_MACH_SPEAR310 || CONFIG_MACH_SPEAR320 */ -#endif - -/* spear padmux initialization function */ -void spear_pmx_init(struct pmx_driver *pmx_driver, uint base, uint size) +static void __init spear3xx_timer_init(void) { - int ret = 0; + char pclk_name[] = "pll3_48m_clk"; + struct clk *gpt_clk, *pclk; + + /* get the system timer clock */ + gpt_clk = clk_get_sys("gpt0", NULL); + if (IS_ERR(gpt_clk)) { + pr_err("%s:couldn't get clk for gpt\n", __func__); + BUG(); + } - /* pad mux initialization */ - pmx_driver->base = ioremap(base, size); - if (!pmx_driver->base) { - ret = -ENOMEM; - goto pmx_fail; + /* get the suitable parent clock for timer*/ + pclk = clk_get(NULL, pclk_name); + if (IS_ERR(pclk)) { + pr_err("%s:couldn't get %s as parent for gpt\n", + __func__, pclk_name); + BUG(); } - ret = pmx_register(pmx_driver); - iounmap(pmx_driver->base); + clk_set_parent(gpt_clk, pclk); + clk_put(gpt_clk); + clk_put(pclk); -pmx_fail: - if (ret) - printk(KERN_ERR "padmux: registeration failed. err no: %d\n", - ret); + spear_setup_timer(); } + +struct sys_timer spear3xx_timer = { + .init = spear3xx_timer_init, +}; |