summaryrefslogtreecommitdiff
path: root/arch/arm/mach-ux500/include/mach
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-ux500/include/mach')
-rw-r--r--arch/arm/mach-ux500/include/mach/db5500-regs.h20
-rw-r--r--arch/arm/mach-ux500/include/mach/db8500-regs.h37
-rw-r--r--arch/arm/mach-ux500/include/mach/hardware.h4
-rw-r--r--arch/arm/mach-ux500/include/mach/id.h20
-rw-r--r--arch/arm/mach-ux500/include/mach/irqs-board-mop500.h5
-rw-r--r--arch/arm/mach-ux500/include/mach/irqs-board-u5500.h21
-rw-r--r--arch/arm/mach-ux500/include/mach/irqs-db5500.h27
-rw-r--r--arch/arm/mach-ux500/include/mach/irqs-db8500.h54
-rw-r--r--arch/arm/mach-ux500/include/mach/irqs.h46
-rw-r--r--arch/arm/mach-ux500/include/mach/prcmu-defs.h30
-rw-r--r--arch/arm/mach-ux500/include/mach/prcmu-regs.h96
-rw-r--r--arch/arm/mach-ux500/include/mach/prcmu.h28
-rw-r--r--arch/arm/mach-ux500/include/mach/smp.h24
-rw-r--r--arch/arm/mach-ux500/include/mach/uncompress.h2
14 files changed, 199 insertions, 215 deletions
diff --git a/arch/arm/mach-ux500/include/mach/db5500-regs.h b/arch/arm/mach-ux500/include/mach/db5500-regs.h
index bd88c1e74060..6ad983294103 100644
--- a/arch/arm/mach-ux500/include/mach/db5500-regs.h
+++ b/arch/arm/mach-ux500/include/mach/db5500-regs.h
@@ -17,6 +17,8 @@
#define U5500_GIC_DIST_BASE 0xA0411000
#define U5500_GIC_CPU_BASE 0xA0410100
#define U5500_DMA_BASE 0x90030000
+#define U5500_STM_BASE 0x90020000
+#define U5500_STM_REG_BASE (U5500_STM_BASE + 0xF000)
#define U5500_MCDE_BASE 0xA0400000
#define U5500_MODEM_BASE 0xB0000000
#define U5500_L2CC_BASE 0xA0412000
@@ -29,7 +31,9 @@
#define U5500_NAND0_BASE 0x60000000
#define U5500_NAND1_BASE 0x70000000
#define U5500_TWD_BASE 0xa0410600
+#define U5500_ICN_BASE 0xA0040000
#define U5500_B2R2_BASE 0xa0200000
+#define U5500_BOOT_ROM_BASE 0x90000000
#define U5500_FSMC_BASE (U5500_PER1_BASE + 0x0000)
#define U5500_SDI0_BASE (U5500_PER1_BASE + 0x1000)
@@ -60,6 +64,7 @@
#define U5500_MSP1_BASE (U5500_PER4_BASE + 0x9000)
#define U5500_GPIO2_BASE (U5500_PER4_BASE + 0xA000)
#define U5500_CDETECT_BASE (U5500_PER4_BASE + 0xF000)
+#define U5500_PRCMU_TCDM_BASE (U5500_PER4_BASE + 0x18000)
#define U5500_SPI0_BASE (U5500_PER5_BASE + 0x0000)
#define U5500_SPI1_BASE (U5500_PER5_BASE + 0x1000)
@@ -83,7 +88,7 @@
#define U5500_HASH0_BASE (U5500_PER6_BASE + 0x1000)
#define U5500_HASH1_BASE (U5500_PER6_BASE + 0x2000)
#define U5500_PKA_BASE (U5500_PER6_BASE + 0x4000)
-#define U5500_PKAM_BASE (U5500_PER6_BASE + 0x5000)
+#define U5500_PKAM_BASE (U5500_PER6_BASE + 0x5100)
#define U5500_MTU0_BASE (U5500_PER6_BASE + 0x6000)
#define U5500_MTU1_BASE (U5500_PER6_BASE + 0x7000)
#define U5500_CR_BASE (U5500_PER6_BASE + 0x8000)
@@ -114,8 +119,19 @@
#define U5500_MBOX2_LOCAL_START (U5500_MBOX_BASE + 0x20)
#define U5500_MBOX2_LOCAL_END (U5500_MBOX_BASE + 0x3F)
-#define U5500_ESRAM_BASE 0x40000000
+#define U5500_ACCCON_BASE_SEC (0xBFFF0000)
+#define U5500_ACCCON_BASE (0xBFFF1000)
+#define U5500_ACCCON_CPUVEC_RESET_ADDR_OFFSET (0x00000020)
+#define U5500_ACCCON_ACC_CPU_CTRL_OFFSET (0x000000BC)
+
+#define U5500_ESRAM_BASE 0x40000000
#define U5500_ESRAM_DMA_LCPA_OFFSET 0x10000
#define U5500_DMA_LCPA_BASE (U5500_ESRAM_BASE + U5500_ESRAM_DMA_LCPA_OFFSET)
+#define U5500_MCDE_SIZE 0x1000
+#define U5500_DSI_LINK_SIZE 0x1000
+#define U5500_DSI_LINK_COUNT 0x2
+#define U5500_DSI_LINK1_BASE (U5500_MCDE_BASE + U5500_MCDE_SIZE)
+#define U5500_DSI_LINK2_BASE (U5500_DSI_LINK1_BASE + U5500_DSI_LINK_SIZE)
+
#endif
diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h
index 16647b255378..049997109cf9 100644
--- a/arch/arm/mach-ux500/include/mach/db8500-regs.h
+++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h
@@ -15,8 +15,13 @@
#define U8500_ESRAM_BANK2 (U8500_ESRAM_BANK1 + U8500_ESRAM_BANK_SIZE)
#define U8500_ESRAM_BANK3 (U8500_ESRAM_BANK2 + U8500_ESRAM_BANK_SIZE)
#define U8500_ESRAM_BANK4 (U8500_ESRAM_BANK3 + U8500_ESRAM_BANK_SIZE)
-/* Use bank 4 for DMA LCPA */
-#define U8500_DMA_LCPA_BASE U8500_ESRAM_BANK4
+/*
+ * on V1 DMA uses 4KB for logical parameters position is right after the 64KB
+ * reserved for security
+ */
+#define U8500_ESRAM_DMA_LCPA_OFFSET 0x10000
+
+#define U8500_DMA_LCPA_BASE (U8500_ESRAM_BANK0 + U8500_ESRAM_DMA_LCPA_OFFSET)
#define U8500_DMA_LCPA_BASE_ED (U8500_ESRAM_BANK4 + 0x4000)
#define U8500_PER3_BASE 0x80000000
@@ -27,9 +32,12 @@
#define U8500_B2R2_BASE 0x80130000
#define U8500_HSEM_BASE 0x80140000
#define U8500_PER4_BASE 0x80150000
+#define U8500_TPIU_BASE 0x80190000
#define U8500_ICN_BASE 0x81000000
#define U8500_BOOT_ROM_BASE 0x90000000
+/* ASIC ID is at 0xbf4 offset within this region */
+#define U8500_ASIC_ID_BASE 0x9001D000
#define U8500_PER6_BASE 0xa03c0000
#define U8500_PER5_BASE 0xa03e0000
@@ -70,13 +78,15 @@
/* per6 base addresses */
#define U8500_RNG_BASE (U8500_PER6_BASE + 0x0000)
-#define U8500_PKA_BASE (U8500_PER6_BASE + 0x1000)
-#define U8500_PKAM_BASE (U8500_PER6_BASE + 0x2000)
+#define U8500_HASH0_BASE (U8500_PER6_BASE + 0x1000)
+#define U8500_HASH1_BASE (U8500_PER6_BASE + 0x2000)
+#define U8500_PKA_BASE (U8500_PER6_BASE + 0x4000)
+#define U8500_PKAM_BASE (U8500_PER6_BASE + 0x5100)
#define U8500_MTU0_BASE (U8500_PER6_BASE + 0x6000) /* v1 */
#define U8500_MTU1_BASE (U8500_PER6_BASE + 0x7000) /* v1 */
#define U8500_CR_BASE (U8500_PER6_BASE + 0x8000) /* v1 */
-#define U8500_CRYPTO0_BASE (U8500_PER6_BASE + 0xa000)
-#define U8500_CRYPTO1_BASE (U8500_PER6_BASE + 0xb000)
+#define U8500_CRYP0_BASE (U8500_PER6_BASE + 0xa000)
+#define U8500_CRYP1_BASE (U8500_PER6_BASE + 0xb000)
#define U8500_CLKRST6_BASE (U8500_PER6_BASE + 0xf000)
/* per5 base addresses */
@@ -93,7 +103,8 @@
#define U8500_DMC_BASE (U8500_PER4_BASE + 0x06000)
#define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x07000)
#define U8500_PRCMU_TCDM_BASE_V1 (U8500_PER4_BASE + 0x0f000)
-#define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x68000)
+#define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x68000)
+#define U8500_PRCMU_TCPM_BASE (U8500_PER4_BASE + 0x60000)
/* per3 base addresses */
#define U8500_FSMC_BASE (U8500_PER3_BASE + 0x0000)
@@ -124,6 +135,7 @@
#define U8500_I2C1_BASE (U8500_PER1_BASE + 0x2000)
#define U8500_MSP0_BASE (U8500_PER1_BASE + 0x3000)
#define U8500_MSP1_BASE (U8500_PER1_BASE + 0x4000)
+#define U8500_MSP3_BASE (U8500_PER1_BASE + 0x5000)
#define U8500_SDI0_BASE (U8500_PER1_BASE + 0x6000)
#define U8500_I2C2_BASE (U8500_PER1_BASE + 0x8000)
#define U8500_SPI3_BASE (U8500_PER1_BASE + 0x9000)
@@ -143,4 +155,15 @@
#define U8500_GPIOBANK7_BASE (U8500_GPIO2_BASE + 0x80)
#define U8500_GPIOBANK8_BASE U8500_GPIO3_BASE
+#define U8500_MCDE_SIZE 0x1000
+#define U8500_DSI_LINK_SIZE 0x1000
+#define U8500_DSI_LINK1_BASE (U8500_MCDE_BASE + U8500_MCDE_SIZE)
+#define U8500_DSI_LINK2_BASE (U8500_DSI_LINK1_BASE + U8500_DSI_LINK_SIZE)
+#define U8500_DSI_LINK3_BASE (U8500_DSI_LINK2_BASE + U8500_DSI_LINK_SIZE)
+#define U8500_DSI_LINK_COUNT 0x3
+
+/* Modem and APE physical addresses */
+#define U8500_MODEM_BASE 0xe000000
+#define U8500_APE_BASE 0x6000000
+
#endif
diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h
index bf63f2631ba0..470ac52663d6 100644
--- a/arch/arm/mach-ux500/include/mach/hardware.h
+++ b/arch/arm/mach-ux500/include/mach/hardware.h
@@ -29,12 +29,10 @@
#include <mach/db8500-regs.h>
#include <mach/db5500-regs.h>
-/* ST-Ericsson modified pl022 id */
-#define SSP_PER_ID 0x01080022
-
#ifndef __ASSEMBLY__
#include <mach/id.h>
+extern void __iomem *_PRCMU_BASE;
#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
diff --git a/arch/arm/mach-ux500/include/mach/id.h b/arch/arm/mach-ux500/include/mach/id.h
index f1288d10b6ab..02b541a37ee5 100644
--- a/arch/arm/mach-ux500/include/mach/id.h
+++ b/arch/arm/mach-ux500/include/mach/id.h
@@ -75,6 +75,26 @@ static inline bool __attribute_const__ cpu_is_u8500v2(void)
return cpu_is_u8500() && ((dbx500_revision() & 0xf0) == 0xB0);
}
+static inline bool cpu_is_u8500v20(void)
+{
+ return cpu_is_u8500() && (dbx500_revision() == 0xB0);
+}
+
+static inline bool cpu_is_u8500v21(void)
+{
+ return cpu_is_u8500() && (dbx500_revision() == 0xB1);
+}
+
+static inline bool cpu_is_u8500v20_or_later(void)
+{
+ return cpu_is_u8500() && !cpu_is_u8500v10() && !cpu_is_u8500v11();
+}
+
+static inline bool ux500_is_svp(void)
+{
+ return false;
+}
+
#define ux500_unknown_soc() BUG()
#endif
diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
index 97ef55f84934..47969909836c 100644
--- a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
+++ b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
@@ -50,6 +50,11 @@
#define MOP500_IRQ_END MOP500_NR_IRQS
+/*
+ * We may have several boards, but only one will run at a
+ * time, so the one with most IRQs will bump this ahead,
+ * but the IRQ_BOARD_START remains the same for either board.
+ */
#if MOP500_IRQ_END > IRQ_BOARD_END
#undef IRQ_BOARD_END
#define IRQ_BOARD_END MOP500_IRQ_END
diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-u5500.h b/arch/arm/mach-ux500/include/mach/irqs-board-u5500.h
new file mode 100644
index 000000000000..29d972c7717b
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/irqs-board-u5500.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef __MACH_IRQS_BOARD_U5500_H
+#define __MACH_IRQS_BOARD_U5500_H
+
+#define AB5500_NR_IRQS 5
+#define IRQ_AB5500_BASE IRQ_BOARD_START
+#define IRQ_AB5500_END (IRQ_AB5500_BASE + AB5500_NR_IRQS)
+
+#define U5500_IRQ_END IRQ_AB5500_END
+
+#if IRQ_BOARD_END < U5500_IRQ_END
+#undef IRQ_BOARD_END
+#define IRQ_BOARD_END U5500_IRQ_END
+#endif
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/irqs-db5500.h b/arch/arm/mach-ux500/include/mach/irqs-db5500.h
index bfa123dbec3b..77239776a6f2 100644
--- a/arch/arm/mach-ux500/include/mach/irqs-db5500.h
+++ b/arch/arm/mach-ux500/include/mach/irqs-db5500.h
@@ -83,4 +83,31 @@
#define IRQ_DB5500_GPIO6 (IRQ_SHPI_START + 125)
#define IRQ_DB5500_GPIO7 (IRQ_SHPI_START + 126)
+#ifdef CONFIG_UX500_SOC_DB5500
+
+/*
+ * After the GPIO ones we reserve a range of IRQ:s in which virtual
+ * IRQ:s representing modem IRQ:s can be allocated
+ */
+#define IRQ_MODEM_EVENTS_BASE IRQ_SOC_START
+#define IRQ_MODEM_EVENTS_NBR 72
+#define IRQ_MODEM_EVENTS_END (IRQ_MODEM_EVENTS_BASE + IRQ_MODEM_EVENTS_NBR)
+
+/* List of virtual IRQ:s that are allocated from the range above */
+#define MBOX_PAIR0_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 43)
+#define MBOX_PAIR1_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 45)
+#define MBOX_PAIR2_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 41)
+
+/*
+ * We may have several SoCs, but only one will run at a
+ * time, so the one with most IRQs will bump this ahead,
+ * but the IRQ_SOC_START remains the same for either SoC.
+ */
+#if IRQ_SOC_END < IRQ_MODEM_EVENTS_END
+#undef IRQ_SOC_END
+#define IRQ_SOC_END IRQ_MODEM_EVENTS_END
+#endif
+
+#endif /* CONFIG_UX500_SOC_DB5500 */
+
#endif
diff --git a/arch/arm/mach-ux500/include/mach/irqs-db8500.h b/arch/arm/mach-ux500/include/mach/irqs-db8500.h
index 8b5d9f0a1633..68bc14974608 100644
--- a/arch/arm/mach-ux500/include/mach/irqs-db8500.h
+++ b/arch/arm/mach-ux500/include/mach/irqs-db8500.h
@@ -93,4 +93,58 @@
#define IRQ_DB8500_GPIO7 (IRQ_SHPI_START + 126)
#define IRQ_DB8500_GPIO8 (IRQ_SHPI_START + 127)
+#define IRQ_CA_WAKE_REQ_ED (IRQ_SHPI_START + 71)
+#define IRQ_AC_READ_NOTIFICATION_0_ED (IRQ_SHPI_START + 66)
+#define IRQ_AC_READ_NOTIFICATION_1_ED (IRQ_SHPI_START + 64)
+#define IRQ_CA_MSG_PEND_NOTIFICATION_0_ED (IRQ_SHPI_START + 67)
+#define IRQ_CA_MSG_PEND_NOTIFICATION_1_ED (IRQ_SHPI_START + 65)
+
+#define IRQ_CA_WAKE_REQ_V1 (IRQ_SHPI_START + 83)
+#define IRQ_AC_READ_NOTIFICATION_0_V1 (IRQ_SHPI_START + 78)
+#define IRQ_AC_READ_NOTIFICATION_1_V1 (IRQ_SHPI_START + 76)
+#define IRQ_CA_MSG_PEND_NOTIFICATION_0_V1 (IRQ_SHPI_START + 79)
+#define IRQ_CA_MSG_PEND_NOTIFICATION_1_V1 (IRQ_SHPI_START + 77)
+
+#ifdef CONFIG_UX500_SOC_DB8500
+
+/* Virtual interrupts corresponding to the PRCMU wakeups. */
+#define IRQ_PRCMU_BASE IRQ_SOC_START
+#define NUM_PRCMU_WAKEUPS (IRQ_PRCMU_END - IRQ_PRCMU_BASE)
+
+#define IRQ_PRCMU_RTC (IRQ_PRCMU_BASE)
+#define IRQ_PRCMU_RTT0 (IRQ_PRCMU_BASE + 1)
+#define IRQ_PRCMU_RTT1 (IRQ_PRCMU_BASE + 2)
+#define IRQ_PRCMU_HSI0 (IRQ_PRCMU_BASE + 3)
+#define IRQ_PRCMU_HSI1 (IRQ_PRCMU_BASE + 4)
+#define IRQ_PRCMU_CA_WAKE (IRQ_PRCMU_BASE + 5)
+#define IRQ_PRCMU_USB (IRQ_PRCMU_BASE + 6)
+#define IRQ_PRCMU_ABB (IRQ_PRCMU_BASE + 7)
+#define IRQ_PRCMU_ABB_FIFO (IRQ_PRCMU_BASE + 8)
+#define IRQ_PRCMU_ARM (IRQ_PRCMU_BASE + 9)
+#define IRQ_PRCMU_MODEM_SW_RESET_REQ (IRQ_PRCMU_BASE + 10)
+#define IRQ_PRCMU_GPIO0 (IRQ_PRCMU_BASE + 11)
+#define IRQ_PRCMU_GPIO1 (IRQ_PRCMU_BASE + 12)
+#define IRQ_PRCMU_GPIO2 (IRQ_PRCMU_BASE + 13)
+#define IRQ_PRCMU_GPIO3 (IRQ_PRCMU_BASE + 14)
+#define IRQ_PRCMU_GPIO4 (IRQ_PRCMU_BASE + 15)
+#define IRQ_PRCMU_GPIO5 (IRQ_PRCMU_BASE + 16)
+#define IRQ_PRCMU_GPIO6 (IRQ_PRCMU_BASE + 17)
+#define IRQ_PRCMU_GPIO7 (IRQ_PRCMU_BASE + 18)
+#define IRQ_PRCMU_GPIO8 (IRQ_PRCMU_BASE + 19)
+#define IRQ_PRCMU_CA_SLEEP (IRQ_PRCMU_BASE + 20)
+#define IRQ_PRCMU_HOTMON_LOW (IRQ_PRCMU_BASE + 21)
+#define IRQ_PRCMU_HOTMON_HIGH (IRQ_PRCMU_BASE + 22)
+#define IRQ_PRCMU_END (IRQ_PRCMU_BASE + 23)
+
+/*
+ * We may have several SoCs, but only one will run at a
+ * time, so the one with most IRQs will bump this ahead,
+ * but the IRQ_SOC_START remains the same for either SoC.
+ */
+#if IRQ_SOC_END < IRQ_PRCMU_END
+#undef IRQ_SOC_END
+#define IRQ_SOC_END IRQ_PRCMU_END
+#endif
+
+#endif /* CONFIG_UX500_SOC_DB8500 */
#endif
diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h
index ba1294c13c4d..9db68d264c5f 100644
--- a/arch/arm/mach-ux500/include/mach/irqs.h
+++ b/arch/arm/mach-ux500/include/mach/irqs.h
@@ -10,49 +10,47 @@
#ifndef ASM_ARCH_IRQS_H
#define ASM_ARCH_IRQS_H
-#include <mach/irqs-db5500.h>
-#include <mach/irqs-db8500.h>
+#include <mach/hardware.h>
-#define IRQ_LOCALTIMER 29
-#define IRQ_LOCALWDOG 30
+#define IRQ_LOCALTIMER 29
+#define IRQ_LOCALWDOG 30
/* Shared Peripheral Interrupt (SHPI) */
#define IRQ_SHPI_START 32
-/* Interrupt numbers generic for shared peripheral */
+/*
+ * MTU0 preserved for now until plat-nomadik is taught not to use it. Don't
+ * add any other IRQs here, use the irqs-dbx500.h files.
+ */
#define IRQ_MTU0 (IRQ_SHPI_START + 4)
-/* There are 128 shared peripheral interrupts assigned to
- * INTID[160:32]. The first 32 interrupts are reserved.
- */
-#define DBX500_NR_INTERNAL_IRQS 161
+#define DBX500_NR_INTERNAL_IRQS 160
/* After chip-specific IRQ numbers we have the GPIO ones */
#define NOMADIK_NR_GPIO 288
#define NOMADIK_GPIO_TO_IRQ(gpio) ((gpio) + DBX500_NR_INTERNAL_IRQS)
#define NOMADIK_IRQ_TO_GPIO(irq) ((irq) - DBX500_NR_INTERNAL_IRQS)
-#define IRQ_BOARD_START NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO)
+#define IRQ_GPIO_END NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO)
+
+#define IRQ_SOC_START IRQ_GPIO_END
+/* This will be overridden by SoC-specific irq headers */
+#define IRQ_SOC_END IRQ_SOC_START
+#include <mach/irqs-db5500.h>
+#include <mach/irqs-db8500.h>
+
+#define IRQ_BOARD_START IRQ_SOC_END
/* This will be overridden by board-specific irq headers */
-#define IRQ_BOARD_END IRQ_BOARD_START
+#define IRQ_BOARD_END IRQ_BOARD_START
#ifdef CONFIG_MACH_U8500
#include <mach/irqs-board-mop500.h>
#endif
-/*
- * After the board specific IRQ:s we reserve a range of IRQ:s in which virtual
- * IRQ:s representing modem IRQ:s can be allocated
- */
-#define IRQ_MODEM_EVENTS_BASE (IRQ_BOARD_END + 1)
-#define IRQ_MODEM_EVENTS_NBR 72
-#define IRQ_MODEM_EVENTS_END (IRQ_MODEM_EVENTS_BASE + IRQ_MODEM_EVENTS_NBR)
-
-/* List of virtual IRQ:s that are allocated from the range above */
-#define MBOX_PAIR0_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 43)
-#define MBOX_PAIR1_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 45)
-#define MBOX_PAIR2_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 41)
+#ifdef CONFIG_MACH_U5500
+#include <mach/irqs-board-u5500.h>
+#endif
-#define NR_IRQS IRQ_MODEM_EVENTS_END
+#define NR_IRQS IRQ_BOARD_END
#endif /* ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-ux500/include/mach/prcmu-defs.h b/arch/arm/mach-ux500/include/mach/prcmu-defs.h
deleted file mode 100644
index 848ba64b561f..000000000000
--- a/arch/arm/mach-ux500/include/mach/prcmu-defs.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Copyright (C) STMicroelectronics 2009
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Sundar Iyer <sundar.iyer@stericsson.com>
- * Author: Martin Persson <martin.persson@stericsson.com>
- *
- * License Terms: GNU General Public License v2
- *
- * PRCM Unit definitions
- */
-
-#ifndef __MACH_PRCMU_DEFS_H
-#define __MACH_PRCMU_DEFS_H
-
-enum prcmu_cpu_opp {
- CPU_OPP_INIT = 0x00,
- CPU_OPP_NO_CHANGE = 0x01,
- CPU_OPP_100 = 0x02,
- CPU_OPP_50 = 0x03,
- CPU_OPP_MAX = 0x04,
- CPU_OPP_EXT_CLK = 0x07
-};
-enum prcmu_ape_opp {
- APE_OPP_NO_CHANGE = 0x00,
- APE_OPP_100 = 0x02,
- APE_OPP_50 = 0x03,
-};
-
-#endif /* __MACH_PRCMU_DEFS_H */
diff --git a/arch/arm/mach-ux500/include/mach/prcmu-regs.h b/arch/arm/mach-ux500/include/mach/prcmu-regs.h
deleted file mode 100644
index 455467e88791..000000000000
--- a/arch/arm/mach-ux500/include/mach/prcmu-regs.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * Copyright (C) STMicroelectronics 2009
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
- * Author: Sundar Iyer <sundar.iyer@stericsson.com>
- *
- * License Terms: GNU General Public License v2
- *
- * PRCM Unit registers
- */
-
-#ifndef __MACH_PRCMU_REGS_H
-#define __MACH_PRCMU_REGS_H
-
-#include <mach/hardware.h>
-
-#define _PRCMU_BASE IO_ADDRESS(U8500_PRCMU_BASE)
-
-#define PRCM_ARM_PLLDIVPS (_PRCMU_BASE + 0x118)
-#define PRCM_ARM_CHGCLKREQ (_PRCMU_BASE + 0x114)
-#define PRCM_PLLARM_ENABLE (_PRCMU_BASE + 0x98)
-#define PRCM_ARMCLKFIX_MGT (_PRCMU_BASE + 0x0)
-#define PRCM_A9_RESETN_CLR (_PRCMU_BASE + 0x1f4)
-#define PRCM_A9_RESETN_SET (_PRCMU_BASE + 0x1f0)
-#define PRCM_ARM_LS_CLAMP (_PRCMU_BASE + 0x30c)
-#define PRCM_SRAM_A9 (_PRCMU_BASE + 0x308)
-
-/* ARM WFI Standby signal register */
-#define PRCM_ARM_WFI_STANDBY (_PRCMU_BASE + 0x130)
-#define PRCMU_IOCR (_PRCMU_BASE + 0x310)
-
-/* CPU mailbox registers */
-#define PRCM_MBOX_CPU_VAL (_PRCMU_BASE + 0x0fc)
-#define PRCM_MBOX_CPU_SET (_PRCMU_BASE + 0x100)
-#define PRCM_MBOX_CPU_CLR (_PRCMU_BASE + 0x104)
-
-/* Dual A9 core interrupt management unit registers */
-#define PRCM_A9_MASK_REQ (_PRCMU_BASE + 0x328)
-#define PRCM_A9_MASK_ACK (_PRCMU_BASE + 0x32c)
-#define PRCM_ARMITMSK31TO0 (_PRCMU_BASE + 0x11c)
-#define PRCM_ARMITMSK63TO32 (_PRCMU_BASE + 0x120)
-#define PRCM_ARMITMSK95TO64 (_PRCMU_BASE + 0x124)
-#define PRCM_ARMITMSK127TO96 (_PRCMU_BASE + 0x128)
-#define PRCM_POWER_STATE_VAL (_PRCMU_BASE + 0x25C)
-#define PRCM_ARMITVAL31TO0 (_PRCMU_BASE + 0x260)
-#define PRCM_ARMITVAL63TO32 (_PRCMU_BASE + 0x264)
-#define PRCM_ARMITVAL95TO64 (_PRCMU_BASE + 0x268)
-#define PRCM_ARMITVAL127TO96 (_PRCMU_BASE + 0x26C)
-
-#define PRCM_HOSTACCESS_REQ (_PRCMU_BASE + 0x334)
-#define ARM_WAKEUP_MODEM 0x1
-
-#define PRCM_ARM_IT1_CLEAR (_PRCMU_BASE + 0x48C)
-#define PRCM_ARM_IT1_VAL (_PRCMU_BASE + 0x494)
-#define PRCM_HOLD_EVT (_PRCMU_BASE + 0x174)
-
-#define PRCM_ITSTATUS0 (_PRCMU_BASE + 0x148)
-#define PRCM_ITSTATUS1 (_PRCMU_BASE + 0x150)
-#define PRCM_ITSTATUS2 (_PRCMU_BASE + 0x158)
-#define PRCM_ITSTATUS3 (_PRCMU_BASE + 0x160)
-#define PRCM_ITSTATUS4 (_PRCMU_BASE + 0x168)
-#define PRCM_ITSTATUS5 (_PRCMU_BASE + 0x484)
-#define PRCM_ITCLEAR5 (_PRCMU_BASE + 0x488)
-#define PRCM_ARMIT_MASKXP70_IT (_PRCMU_BASE + 0x1018)
-
-/* System reset register */
-#define PRCM_APE_SOFTRST (_PRCMU_BASE + 0x228)
-
-/* Level shifter and clamp control registers */
-#define PRCM_MMIP_LS_CLAMP_SET (_PRCMU_BASE + 0x420)
-#define PRCM_MMIP_LS_CLAMP_CLR (_PRCMU_BASE + 0x424)
-
-/* PRCMU clock/PLL/reset registers */
-#define PRCM_PLLDSI_FREQ (_PRCMU_BASE + 0x500)
-#define PRCM_PLLDSI_ENABLE (_PRCMU_BASE + 0x504)
-#define PRCM_LCDCLK_MGT (_PRCMU_BASE + 0x044)
-#define PRCM_MCDECLK_MGT (_PRCMU_BASE + 0x064)
-#define PRCM_HDMICLK_MGT (_PRCMU_BASE + 0x058)
-#define PRCM_TVCLK_MGT (_PRCMU_BASE + 0x07c)
-#define PRCM_DSI_PLLOUT_SEL (_PRCMU_BASE + 0x530)
-#define PRCM_DSITVCLK_DIV (_PRCMU_BASE + 0x52C)
-#define PRCM_APE_RESETN_SET (_PRCMU_BASE + 0x1E4)
-#define PRCM_APE_RESETN_CLR (_PRCMU_BASE + 0x1E8)
-
-/* ePOD and memory power signal control registers */
-#define PRCM_EPOD_C_SET (_PRCMU_BASE + 0x410)
-#define PRCM_SRAM_LS_SLEEP (_PRCMU_BASE + 0x304)
-
-/* Debug power control unit registers */
-#define PRCM_POWER_STATE_SET (_PRCMU_BASE + 0x254)
-
-/* Miscellaneous unit registers */
-#define PRCM_DSI_SW_RESET (_PRCMU_BASE + 0x324)
-
-#endif /* __MACH_PRCMU_REGS_H */
diff --git a/arch/arm/mach-ux500/include/mach/prcmu.h b/arch/arm/mach-ux500/include/mach/prcmu.h
deleted file mode 100644
index c49e456162ef..000000000000
--- a/arch/arm/mach-ux500/include/mach/prcmu.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Copyright (C) STMicroelectronics 2009
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
- * Author: Sundar Iyer <sundar.iyer@stericsson.com>
- * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
- *
- * License Terms: GNU General Public License v2
- *
- * PRCM Unit f/w API
- */
-#ifndef __MACH_PRCMU_H
-#define __MACH_PRCMU_H
-#include <mach/prcmu-defs.h>
-
-void __init prcmu_early_init(void);
-int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);
-int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size);
-int prcmu_set_ape_opp(enum prcmu_ape_opp opp);
-int prcmu_set_cpu_opp(enum prcmu_cpu_opp opp);
-int prcmu_set_ape_cpu_opps(enum prcmu_ape_opp ape_opp,
- enum prcmu_cpu_opp cpu_opp);
-int prcmu_get_ape_opp(void);
-int prcmu_get_cpu_opp(void);
-bool prcmu_has_arm_maxopp(void);
-
-#endif /* __MACH_PRCMU_H */
diff --git a/arch/arm/mach-ux500/include/mach/smp.h b/arch/arm/mach-ux500/include/mach/smp.h
deleted file mode 100644
index ca2b15b1b3b1..000000000000
--- a/arch/arm/mach-ux500/include/mach/smp.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * This file is based ARM realview platform.
- * Copyright (C) ARM Limited.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#ifndef ASMARM_ARCH_SMP_H
-#define ASMARM_ARCH_SMP_H
-
-#include <asm/hardware/gic.h>
-
-/* This is required to wakeup the secondary core */
-extern void u8500_secondary_startup(void);
-
-/*
- * We use IRQ1 as the IPI
- */
-static inline void smp_cross_call(const struct cpumask *mask, int ipi)
-{
- gic_raise_softirq(mask, ipi);
-}
-#endif
diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h
index ab0fe1432fae..088b550c40df 100644
--- a/arch/arm/mach-ux500/include/mach/uncompress.h
+++ b/arch/arm/mach-ux500/include/mach/uncompress.h
@@ -24,7 +24,7 @@
#include <linux/amba/serial.h>
#include <mach/hardware.h>
-static u32 ux500_uart_base;
+u32 ux500_uart_base;
static void putc(const char c)
{
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-03 03:29:23 +0000