diff options
Diffstat (limited to 'arch/arm/plat-mxc/include/mach/fsl_usb.h')
-rw-r--r-- | arch/arm/plat-mxc/include/mach/fsl_usb.h | 89 |
1 files changed, 89 insertions, 0 deletions
diff --git a/arch/arm/plat-mxc/include/mach/fsl_usb.h b/arch/arm/plat-mxc/include/mach/fsl_usb.h new file mode 100644 index 000000000000..f1650602f996 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/fsl_usb.h @@ -0,0 +1,89 @@ +/* + * Copyright 2005-2009 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/* + * USB Host side, platform-specific functionality. + */ + +#include <linux/usb/fsl_xcvr.h> +#include <mach/arc_otg.h> + +/* ehci_arc_hc_driver.flags value */ +#define FSL_PLATFORM_HC_FLAGS (HCD_USB2 | HCD_MEMORY) + +static void fsl_setup_phy(struct ehci_hcd *ehci, + enum fsl_usb2_phy_modes phy_mode, + int port_offset); + +static inline void fsl_platform_usb_setup(struct ehci_hcd *ehci) +{ + struct fsl_usb2_platform_data *pdata; + + pdata = ehci_to_hcd(ehci)->self.controller->platform_data; + fsl_setup_phy(ehci, pdata->phy_mode, 0); +} + +static inline void fsl_platform_set_host_mode(struct usb_hcd *hcd) +{ + unsigned int temp; + struct fsl_usb2_platform_data *pdata; + + pdata = hcd->self.controller->platform_data; + + if (pdata->xcvr_ops && pdata->xcvr_ops->set_host) + pdata->xcvr_ops->set_host(); + + /* set host mode */ + temp = readl(hcd->regs + 0x1a8); + writel(temp | USBMODE_CM_HOST, hcd->regs + 0x1a8); +} + +/* Needed for enable PP and i2c/serial transceivers */ +static inline void +fsl_platform_set_vbus_power(struct fsl_usb2_platform_data *pdata, int on) +{ + u32 temp; + + /* HCSPARAMS */ + temp = readl(pdata->regs + 0x104); + /* Port Power Control */ + if (temp & HCSPARAMS_PPC) { + temp = readl(pdata->regs + FSL_SOC_USB_PORTSC1); + writel(temp | PORT_POWER, pdata->regs + FSL_SOC_USB_PORTSC1); + } + + if (pdata->xcvr_ops && pdata->xcvr_ops->set_vbus_power) + pdata->xcvr_ops->set_vbus_power(pdata->xcvr_ops, pdata, on); +} + +/* Set USB AHB burst length for host */ +static inline void fsl_platform_set_ahb_burst(struct usb_hcd *hcd) +{ + struct fsl_usb2_platform_data *pdata; + unsigned int temp; + + pdata = hcd->self.controller->platform_data; + if (pdata->change_ahb_burst) { + temp = readl(hcd->regs + FSL_SOC_USB_SBUSCFG); + writel((temp & (~(0x7))) | pdata->ahb_burst_mode, + hcd->regs + FSL_SOC_USB_SBUSCFG); + } + + /* Increase TX fifo threshold for USB+ATA for i.mx35 2.0 */ + if (cpu_is_mx35_rev(CHIP_REV_2_0) >= 1) { + temp = readl(hcd->regs + FSL_SOC_USB_TXFILLTUNING); + /* Change TX FIFO threshold to be 0x20 */ + writel((temp & (~(0x3f << 16))) | (0x20 << 16), + hcd->regs + FSL_SOC_USB_TXFILLTUNING); + } +} |