summaryrefslogtreecommitdiff
path: root/arch/arm/plat-omap/dma.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/plat-omap/dma.c')
-rw-r--r--arch/arm/plat-omap/dma.c50
1 files changed, 44 insertions, 6 deletions
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index ec7eddf9e525..f5c5b8da9a87 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -30,6 +30,7 @@
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/slab.h>
+#include <linux/delay.h>
#include <asm/system.h>
#include <mach/hardware.h>
@@ -996,11 +997,17 @@ void omap_start_dma(int lch)
l = dma_read(CCR(lch));
/*
- * Errata: On ES2.0 BUFFERING disable must be set.
- * This will always fail on ES1.0
+ * Errata: Inter Frame DMA buffering issue (All OMAP2420 and
+ * OMAP2430ES1.0): DMA will wrongly buffer elements if packing and
+ * bursting is enabled. This might result in data gets stalled in
+ * FIFO at the end of the block.
+ * Workaround: DMA channels must have BUFFERING_DISABLED bit set to
+ * guarantee no data will stay in the DMA FIFO in case inter frame
+ * buffering occurs.
*/
- if (cpu_is_omap24xx())
- l |= OMAP_DMA_CCR_EN;
+ if (cpu_is_omap2420() ||
+ (cpu_is_omap2430() && (omap_type() == OMAP2430_REV_ES1_0)))
+ l |= OMAP_DMA_CCR_BUFFERING_DISABLE;
l |= OMAP_DMA_CCR_EN;
dma_write(l, CCR(lch));
@@ -1018,8 +1025,39 @@ void omap_stop_dma(int lch)
dma_write(0, CICR(lch));
l = dma_read(CCR(lch));
- l &= ~OMAP_DMA_CCR_EN;
- dma_write(l, CCR(lch));
+ /* OMAP3 Errata i541: sDMA FIFO draining does not finish */
+ if (cpu_is_omap34xx() && (l & OMAP_DMA_CCR_SEL_SRC_DST_SYNC)) {
+ int i = 0;
+ u32 sys_cf;
+
+ /* Configure No-Standby */
+ l = dma_read(OCP_SYSCONFIG);
+ sys_cf = l;
+ l &= ~DMA_SYSCONFIG_MIDLEMODE_MASK;
+ l |= DMA_SYSCONFIG_MIDLEMODE(DMA_IDLEMODE_NO_IDLE);
+ dma_write(l , OCP_SYSCONFIG);
+
+ l = dma_read(CCR(lch));
+ l &= ~OMAP_DMA_CCR_EN;
+ dma_write(l, CCR(lch));
+
+ /* Wait for sDMA FIFO drain */
+ l = dma_read(CCR(lch));
+ while (i < 100 && (l & (OMAP_DMA_CCR_RD_ACTIVE |
+ OMAP_DMA_CCR_WR_ACTIVE))) {
+ udelay(5);
+ i++;
+ l = dma_read(CCR(lch));
+ }
+ if (i >= 100)
+ printk(KERN_ERR "DMA drain did not complete on "
+ "lch %d\n", lch);
+ /* Restore OCP_SYSCONFIG */
+ dma_write(sys_cf, OCP_SYSCONFIG);
+ } else {
+ l &= ~OMAP_DMA_CCR_EN;
+ dma_write(l, CCR(lch));
+ }
if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
int next_lch, cur_lch = lch;