diff options
Diffstat (limited to 'arch/arm/plat-s3c64xx/include/plat')
26 files changed, 0 insertions, 1885 deletions
diff --git a/arch/arm/plat-s3c64xx/include/plat/dma-plat.h b/arch/arm/plat-s3c64xx/include/plat/dma-plat.h deleted file mode 100644 index 8f76a1e474d6..000000000000 --- a/arch/arm/plat-s3c64xx/include/plat/dma-plat.h +++ /dev/null @@ -1,70 +0,0 @@ -/* linux/arch/arm/plat-s3c64xx/include/plat/dma-plat.h - * - * Copyright 2009 Openmoko, Inc. - * Copyright 2009 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C64XX DMA core - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */ - -struct s3c64xx_dma_buff; - -/** s3c64xx_dma_buff - S3C64XX DMA buffer descriptor - * @next: Pointer to next buffer in queue or ring. - * @pw: Client provided identifier - * @lli: Pointer to hardware descriptor this buffer is associated with. - * @lli_dma: Hardare address of the descriptor. - */ -struct s3c64xx_dma_buff { - struct s3c64xx_dma_buff *next; - - void *pw; - struct pl080s_lli *lli; - dma_addr_t lli_dma; -}; - -struct s3c64xx_dmac; - -struct s3c2410_dma_chan { - unsigned char number; /* number of this dma channel */ - unsigned char in_use; /* channel allocated */ - unsigned char bit; /* bit for enable/disable/etc */ - unsigned char hw_width; - unsigned char peripheral; - - unsigned int flags; - enum s3c2410_dmasrc source; - - - dma_addr_t dev_addr; - - struct s3c2410_dma_client *client; - struct s3c64xx_dmac *dmac; /* pointer to controller */ - - void __iomem *regs; - - /* cdriver callbacks */ - s3c2410_dma_cbfn_t callback_fn; /* buffer done callback */ - s3c2410_dma_opfn_t op_fn; /* channel op callback */ - - /* buffer list and information */ - struct s3c64xx_dma_buff *curr; /* current dma buffer */ - struct s3c64xx_dma_buff *next; /* next buffer to load */ - struct s3c64xx_dma_buff *end; /* end of queue */ - - /* note, when channel is running in circular mode, curr is the - * first buffer enqueued, end is the last and curr is where the - * last buffer-done event is set-at. The buffers are not freed - * and the last buffer hardware descriptor points back to the - * first. - */ -}; - -#include <plat/dma-core.h> diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-a.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-a.h deleted file mode 100644 index 9aa0e427d113..000000000000 --- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-a.h +++ /dev/null @@ -1,48 +0,0 @@ -/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-a.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank A register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPACON (S3C64XX_GPA_BASE + 0x00) -#define S3C64XX_GPADAT (S3C64XX_GPA_BASE + 0x04) -#define S3C64XX_GPAPUD (S3C64XX_GPA_BASE + 0x08) -#define S3C64XX_GPACONSLP (S3C64XX_GPA_BASE + 0x0c) -#define S3C64XX_GPAPUDSLP (S3C64XX_GPA_BASE + 0x10) - -#define S3C64XX_GPA_CONMASK(__gpio) (0xf << ((__gpio) * 4)) -#define S3C64XX_GPA_INPUT(__gpio) (0x0 << ((__gpio) * 4)) -#define S3C64XX_GPA_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) - -#define S3C64XX_GPA0_UART_RXD0 (0x02 << 0) -#define S3C64XX_GPA0_EINT_G1_0 (0x07 << 0) - -#define S3C64XX_GPA1_UART_TXD0 (0x02 << 4) -#define S3C64XX_GPA1_EINT_G1_1 (0x07 << 4) - -#define S3C64XX_GPA2_UART_nCTS0 (0x02 << 8) -#define S3C64XX_GPA2_EINT_G1_2 (0x07 << 8) - -#define S3C64XX_GPA3_UART_nRTS0 (0x02 << 12) -#define S3C64XX_GPA3_EINT_G1_3 (0x07 << 12) - -#define S3C64XX_GPA4_UART_RXD1 (0x02 << 16) -#define S3C64XX_GPA4_EINT_G1_4 (0x07 << 16) - -#define S3C64XX_GPA5_UART_TXD1 (0x02 << 20) -#define S3C64XX_GPA5_EINT_G1_5 (0x07 << 20) - -#define S3C64XX_GPA6_UART_nCTS1 (0x02 << 24) -#define S3C64XX_GPA6_EINT_G1_6 (0x07 << 24) - -#define S3C64XX_GPA7_UART_nRTS1 (0x02 << 28) -#define S3C64XX_GPA7_EINT_G1_7 (0x07 << 28) - diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-b.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-b.h deleted file mode 100644 index 3933adb4d50a..000000000000 --- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-b.h +++ /dev/null @@ -1,60 +0,0 @@ -/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-b.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank B register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPBCON (S3C64XX_GPB_BASE + 0x00) -#define S3C64XX_GPBDAT (S3C64XX_GPB_BASE + 0x04) -#define S3C64XX_GPBPUD (S3C64XX_GPB_BASE + 0x08) -#define S3C64XX_GPBCONSLP (S3C64XX_GPB_BASE + 0x0c) -#define S3C64XX_GPBPUDSLP (S3C64XX_GPB_BASE + 0x10) - -#define S3C64XX_GPB_CONMASK(__gpio) (0xf << ((__gpio) * 4)) -#define S3C64XX_GPB_INPUT(__gpio) (0x0 << ((__gpio) * 4)) -#define S3C64XX_GPB_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) - -#define S3C64XX_GPB0_UART_RXD2 (0x02 << 0) -#define S3C64XX_GPB0_EXTDMA_REQ (0x03 << 0) -#define S3C64XX_GPB0_IrDA_RXD (0x04 << 0) -#define S3C64XX_GPB0_ADDR_CF0 (0x05 << 0) -#define S3C64XX_GPB0_EINT_G1_8 (0x07 << 0) - -#define S3C64XX_GPB1_UART_TXD2 (0x02 << 4) -#define S3C64XX_GPB1_EXTDMA_ACK (0x03 << 4) -#define S3C64XX_GPB1_IrDA_TXD (0x04 << 4) -#define S3C64XX_GPB1_ADDR_CF1 (0x05 << 4) -#define S3C64XX_GPB1_EINT_G1_9 (0x07 << 4) - -#define S3C64XX_GPB2_UART_RXD3 (0x02 << 8) -#define S3C64XX_GPB2_IrDA_RXD (0x03 << 8) -#define S3C64XX_GPB2_EXTDMA_REQ (0x04 << 8) -#define S3C64XX_GPB2_ADDR_CF2 (0x05 << 8) -#define S3C64XX_GPB2_I2C_SCL1 (0x06 << 8) -#define S3C64XX_GPB2_EINT_G1_10 (0x07 << 8) - -#define S3C64XX_GPB3_UART_TXD3 (0x02 << 12) -#define S3C64XX_GPB3_IrDA_TXD (0x03 << 12) -#define S3C64XX_GPB3_EXTDMA_ACK (0x04 << 12) -#define S3C64XX_GPB3_I2C_SDA1 (0x06 << 12) -#define S3C64XX_GPB3_EINT_G1_11 (0x07 << 12) - -#define S3C64XX_GPB4_IrDA_SDBW (0x02 << 16) -#define S3C64XX_GPB4_CAM_FIELD (0x03 << 16) -#define S3C64XX_GPB4_CF_DATA_DIR (0x04 << 16) -#define S3C64XX_GPB4_EINT_G1_12 (0x07 << 16) - -#define S3C64XX_GPB5_I2C_SCL0 (0x02 << 20) -#define S3C64XX_GPB5_EINT_G1_13 (0x07 << 20) - -#define S3C64XX_GPB6_I2C_SDA0 (0x02 << 24) -#define S3C64XX_GPB6_EINT_G1_14 (0x07 << 24) - diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h deleted file mode 100644 index e22b49f4f982..000000000000 --- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h +++ /dev/null @@ -1,53 +0,0 @@ -/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank C register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPCCON (S3C64XX_GPC_BASE + 0x00) -#define S3C64XX_GPCDAT (S3C64XX_GPC_BASE + 0x04) -#define S3C64XX_GPCPUD (S3C64XX_GPC_BASE + 0x08) -#define S3C64XX_GPCCONSLP (S3C64XX_GPC_BASE + 0x0c) -#define S3C64XX_GPCPUDSLP (S3C64XX_GPC_BASE + 0x10) - -#define S3C64XX_GPC_CONMASK(__gpio) (0xf << ((__gpio) * 4)) -#define S3C64XX_GPC_INPUT(__gpio) (0x0 << ((__gpio) * 4)) -#define S3C64XX_GPC_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) - -#define S3C64XX_GPC0_SPI_MISO0 (0x02 << 0) -#define S3C64XX_GPC0_EINT_G2_0 (0x07 << 0) - -#define S3C64XX_GPC1_SPI_CLKO (0x02 << 4) -#define S3C64XX_GPC1_EINT_G2_1 (0x07 << 4) - -#define S3C64XX_GPC2_SPI_MOSIO (0x02 << 8) -#define S3C64XX_GPC2_EINT_G2_2 (0x07 << 8) - -#define S3C64XX_GPC3_SPI_nCSO (0x02 << 12) -#define S3C64XX_GPC3_EINT_G2_3 (0x07 << 12) - -#define S3C64XX_GPC4_SPI_MISO1 (0x02 << 16) -#define S3C64XX_GPC4_MMC2_CMD (0x03 << 16) -#define S3C64XX_GPC4_I2S_V40_DO0 (0x05 << 16) -#define S3C64XX_GPC4_EINT_G2_4 (0x07 << 16) - -#define S3C64XX_GPC5_SPI_CLK1 (0x02 << 20) -#define S3C64XX_GPC5_MMC2_CLK (0x03 << 20) -#define S3C64XX_GPC5_I2S_V40_DO1 (0x05 << 20) -#define S3C64XX_GPC5_EINT_G2_5 (0x07 << 20) - -#define S3C64XX_GPC6_SPI_MOSI1 (0x02 << 24) -#define S3C64XX_GPC6_EINT_G2_6 (0x07 << 24) - -#define S3C64XX_GPC7_SPI_nCS1 (0x02 << 28) -#define S3C64XX_GPC7_I2S_V40_DO2 (0x05 << 28) -#define S3C64XX_GPC7_EINT_G2_7 (0x07 << 28) - diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h deleted file mode 100644 index 6fe4a49c26f0..000000000000 --- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h +++ /dev/null @@ -1,49 +0,0 @@ -/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank D register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPDCON (S3C64XX_GPD_BASE + 0x00) -#define S3C64XX_GPDDAT (S3C64XX_GPD_BASE + 0x04) -#define S3C64XX_GPDPUD (S3C64XX_GPD_BASE + 0x08) -#define S3C64XX_GPDCONSLP (S3C64XX_GPD_BASE + 0x0c) -#define S3C64XX_GPDPUDSLP (S3C64XX_GPD_BASE + 0x10) - -#define S3C64XX_GPD_CONMASK(__gpio) (0xf << ((__gpio) * 4)) -#define S3C64XX_GPD_INPUT(__gpio) (0x0 << ((__gpio) * 4)) -#define S3C64XX_GPD_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) - -#define S3C64XX_GPD0_PCM0_SCLK (0x02 << 0) -#define S3C64XX_GPD0_I2S0_CLK (0x03 << 0) -#define S3C64XX_GPD0_AC97_BITCLK (0x04 << 0) -#define S3C64XX_GPD0_EINT_G3_0 (0x07 << 0) - -#define S3C64XX_GPD1_PCM0_EXTCLK (0x02 << 4) -#define S3C64XX_GPD1_I2S0_CDCLK (0x03 << 4) -#define S3C64XX_GPD1_AC97_nRESET (0x04 << 4) -#define S3C64XX_GPD1_EINT_G3_1 (0x07 << 4) - -#define S3C64XX_GPD2_PCM0_FSYNC (0x02 << 8) -#define S3C64XX_GPD2_I2S0_LRCLK (0x03 << 8) -#define S3C64XX_GPD2_AC97_SYNC (0x04 << 8) -#define S3C64XX_GPD2_EINT_G3_2 (0x07 << 8) - -#define S3C64XX_GPD3_PCM0_SIN (0x02 << 12) -#define S3C64XX_GPD3_I2S0_DI (0x03 << 12) -#define S3C64XX_GPD3_AC97_SDI (0x04 << 12) -#define S3C64XX_GPD3_EINT_G3_3 (0x07 << 12) - -#define S3C64XX_GPD4_PCM0_SOUT (0x02 << 16) -#define S3C64XX_GPD4_I2S0_D0 (0x03 << 16) -#define S3C64XX_GPD4_AC97_SDO (0x04 << 16) -#define S3C64XX_GPD4_EINT_G3_4 (0x07 << 16) - diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-e.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-e.h deleted file mode 100644 index 7fcf3d8e0a48..000000000000 --- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-e.h +++ /dev/null @@ -1,44 +0,0 @@ -/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-e.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank E register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPECON (S3C64XX_GPE_BASE + 0x00) -#define S3C64XX_GPEDAT (S3C64XX_GPE_BASE + 0x04) -#define S3C64XX_GPEPUD (S3C64XX_GPE_BASE + 0x08) -#define S3C64XX_GPECONSLP (S3C64XX_GPE_BASE + 0x0c) -#define S3C64XX_GPEPUDSLP (S3C64XX_GPE_BASE + 0x10) - -#define S3C64XX_GPE_CONMASK(__gpio) (0xf << ((__gpio) * 4)) -#define S3C64XX_GPE_INPUT(__gpio) (0x0 << ((__gpio) * 4)) -#define S3C64XX_GPE_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) - -#define S3C64XX_GPE0_PCM1_SCLK (0x02 << 0) -#define S3C64XX_GPE0_I2S1_CLK (0x03 << 0) -#define S3C64XX_GPE0_AC97_BITCLK (0x04 << 0) - -#define S3C64XX_GPE1_PCM1_EXTCLK (0x02 << 4) -#define S3C64XX_GPE1_I2S1_CDCLK (0x03 << 4) -#define S3C64XX_GPE1_AC97_nRESET (0x04 << 4) - -#define S3C64XX_GPE2_PCM1_FSYNC (0x02 << 8) -#define S3C64XX_GPE2_I2S1_LRCLK (0x03 << 8) -#define S3C64XX_GPE2_AC97_SYNC (0x04 << 8) - -#define S3C64XX_GPE3_PCM1_SIN (0x02 << 12) -#define S3C64XX_GPE3_I2S1_DI (0x03 << 12) -#define S3C64XX_GPE3_AC97_SDI (0x04 << 12) - -#define S3C64XX_GPE4_PCM1_SOUT (0x02 << 16) -#define S3C64XX_GPE4_I2S1_D0 (0x03 << 16) -#define S3C64XX_GPE4_AC97_SDO (0x04 << 16) - diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-f.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-f.h deleted file mode 100644 index f3faff974a18..000000000000 --- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-f.h +++ /dev/null @@ -1,71 +0,0 @@ -/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-f.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank F register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPFCON (S3C64XX_GPF_BASE + 0x00) -#define S3C64XX_GPFDAT (S3C64XX_GPF_BASE + 0x04) -#define S3C64XX_GPFPUD (S3C64XX_GPF_BASE + 0x08) -#define S3C64XX_GPFCONSLP (S3C64XX_GPF_BASE + 0x0c) -#define S3C64XX_GPFPUDSLP (S3C64XX_GPF_BASE + 0x10) - -#define S3C64XX_GPF_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) -#define S3C64XX_GPF_INPUT(__gpio) (0x0 << ((__gpio) * 2)) -#define S3C64XX_GPF_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) - -#define S3C64XX_GPF0_CAMIF_CLK (0x02 << 0) -#define S3C64XX_GPF0_EINT_G4_0 (0x03 << 0) - -#define S3C64XX_GPF1_CAMIF_HREF (0x02 << 2) -#define S3C64XX_GPF1_EINT_G4_1 (0x03 << 2) - -#define S3C64XX_GPF2_CAMIF_PCLK (0x02 << 4) -#define S3C64XX_GPF2_EINT_G4_2 (0x03 << 4) - -#define S3C64XX_GPF3_CAMIF_nRST (0x02 << 6) -#define S3C64XX_GPF3_EINT_G4_3 (0x03 << 6) - -#define S3C64XX_GPF4_CAMIF_VSYNC (0x02 << 8) -#define S3C64XX_GPF4_EINT_G4_4 (0x03 << 8) - -#define S3C64XX_GPF5_CAMIF_YDATA0 (0x02 << 10) -#define S3C64XX_GPF5_EINT_G4_5 (0x03 << 10) - -#define S3C64XX_GPF6_CAMIF_YDATA1 (0x02 << 12) -#define S3C64XX_GPF6_EINT_G4_6 (0x03 << 12) - -#define S3C64XX_GPF7_CAMIF_YDATA2 (0x02 << 14) -#define S3C64XX_GPF7_EINT_G4_7 (0x03 << 14) - -#define S3C64XX_GPF8_CAMIF_YDATA3 (0x02 << 16) -#define S3C64XX_GPF8_EINT_G4_8 (0x03 << 16) - -#define S3C64XX_GPF9_CAMIF_YDATA4 (0x02 << 18) -#define S3C64XX_GPF9_EINT_G4_9 (0x03 << 18) - -#define S3C64XX_GPF10_CAMIF_YDATA5 (0x02 << 20) -#define S3C64XX_GPF10_EINT_G4_10 (0x03 << 20) - -#define S3C64XX_GPF11_CAMIF_YDATA6 (0x02 << 22) -#define S3C64XX_GPF11_EINT_G4_11 (0x03 << 22) - -#define S3C64XX_GPF12_CAMIF_YDATA7 (0x02 << 24) -#define S3C64XX_GPF12_EINT_G4_12 (0x03 << 24) - -#define S3C64XX_GPF13_PWM_ECLK (0x02 << 26) -#define S3C64XX_GPF13_EINT_G4_13 (0x03 << 26) - -#define S3C64XX_GPF14_PWM_TOUT0 (0x02 << 28) -#define S3C64XX_GPF14_CLKOUT0 (0x03 << 28) - -#define S3C64XX_GPF15_PWM_TOUT1 (0x02 << 30) - diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-g.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-g.h deleted file mode 100644 index 35bbd2378e55..000000000000 --- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-g.h +++ /dev/null @@ -1,42 +0,0 @@ -/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-g.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank G register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPGCON (S3C64XX_GPG_BASE + 0x00) -#define S3C64XX_GPGDAT (S3C64XX_GPG_BASE + 0x04) -#define S3C64XX_GPGPUD (S3C64XX_GPG_BASE + 0x08) -#define S3C64XX_GPGCONSLP (S3C64XX_GPG_BASE + 0x0c) -#define S3C64XX_GPGPUDSLP (S3C64XX_GPG_BASE + 0x10) - -#define S3C64XX_GPG_CONMASK(__gpio) (0xf << ((__gpio) * 4)) -#define S3C64XX_GPG_INPUT(__gpio) (0x0 << ((__gpio) * 4)) -#define S3C64XX_GPG_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) - -#define S3C64XX_GPG0_MMC0_CLK (0x02 << 0) -#define S3C64XX_GPG0_EINT_G5_0 (0x07 << 0) - -#define S3C64XX_GPG1_MMC0_CMD (0x02 << 4) -#define S3C64XX_GPG1_EINT_G5_1 (0x07 << 4) - -#define S3C64XX_GPG2_MMC0_DATA0 (0x02 << 8) -#define S3C64XX_GPG2_EINT_G5_2 (0x07 << 8) - -#define S3C64XX_GPG3_MMC0_DATA1 (0x02 << 12) -#define S3C64XX_GPG3_EINT_G5_3 (0x07 << 12) - -#define S3C64XX_GPG4_MMC0_DATA2 (0x02 << 16) -#define S3C64XX_GPG4_EINT_G5_4 (0x07 << 16) - -#define S3C64XX_GPG5_MMC0_DATA3 (0x02 << 20) -#define S3C64XX_GPG5_EINT_G5_5 (0x07 << 20) - diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h deleted file mode 100644 index 2ba1767512d7..000000000000 --- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h +++ /dev/null @@ -1,74 +0,0 @@ -/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank H register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPHCON0 (S3C64XX_GPH_BASE + 0x00) -#define S3C64XX_GPHCON1 (S3C64XX_GPH_BASE + 0x04) -#define S3C64XX_GPHDAT (S3C64XX_GPH_BASE + 0x08) -#define S3C64XX_GPHPUD (S3C64XX_GPH_BASE + 0x0c) -#define S3C64XX_GPHCONSLP (S3C64XX_GPH_BASE + 0x10) -#define S3C64XX_GPHPUDSLP (S3C64XX_GPH_BASE + 0x14) - -#define S3C64XX_GPH_CONMASK(__gpio) (0xf << ((__gpio) * 4)) -#define S3C64XX_GPH_INPUT(__gpio) (0x0 << ((__gpio) * 4)) -#define S3C64XX_GPH_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) - -#define S3C64XX_GPH0_MMC1_CLK (0x02 << 0) -#define S3C64XX_GPH0_KP_COL0 (0x04 << 0) -#define S3C64XX_GPH0_EINT_G6_0 (0x07 << 0) - -#define S3C64XX_GPH1_MMC1_CMD (0x02 << 4) -#define S3C64XX_GPH1_KP_COL1 (0x04 << 4) -#define S3C64XX_GPH1_EINT_G6_1 (0x07 << 4) - -#define S3C64XX_GPH2_MMC1_DATA0 (0x02 << 8) -#define S3C64XX_GPH2_KP_COL2 (0x04 << 8) -#define S3C64XX_GPH2_EINT_G6_2 (0x07 << 8) - -#define S3C64XX_GPH3_MMC1_DATA1 (0x02 << 12) -#define S3C64XX_GPH3_KP_COL3 (0x04 << 12) -#define S3C64XX_GPH3_EINT_G6_3 (0x07 << 12) - -#define S3C64XX_GPH4_MMC1_DATA2 (0x02 << 16) -#define S3C64XX_GPH4_KP_COL4 (0x04 << 16) -#define S3C64XX_GPH4_EINT_G6_4 (0x07 << 16) - -#define S3C64XX_GPH5_MMC1_DATA3 (0x02 << 20) -#define S3C64XX_GPH5_KP_COL5 (0x04 << 20) -#define S3C64XX_GPH5_EINT_G6_5 (0x07 << 20) - -#define S3C64XX_GPH6_MMC1_DATA4 (0x02 << 24) -#define S3C64XX_GPH6_MMC2_DATA0 (0x03 << 24) -#define S3C64XX_GPH6_KP_COL6 (0x04 << 24) -#define S3C64XX_GPH6_I2S_V40_BCLK (0x05 << 24) -#define S3C64XX_GPH6_ADDR_CF0 (0x06 << 24) -#define S3C64XX_GPH6_EINT_G6_6 (0x07 << 24) - -#define S3C64XX_GPH7_MMC1_DATA5 (0x02 << 28) -#define S3C64XX_GPH7_MMC2_DATA1 (0x03 << 28) -#define S3C64XX_GPH7_KP_COL7 (0x04 << 28) -#define S3C64XX_GPH7_I2S_V40_CDCLK (0x05 << 28) -#define S3C64XX_GPH7_ADDR_CF1 (0x06 << 28) -#define S3C64XX_GPH7_EINT_G6_7 (0x07 << 28) - -#define S3C64XX_GPH8_MMC1_DATA6 (0x02 << 0) -#define S3C64XX_GPH8_MMC2_DATA2 (0x03 << 0) -#define S3C64XX_GPH8_I2S_V40_LRCLK (0x05 << 0) -#define S3C64XX_GPH8_ADDR_CF2 (0x06 << 0) -#define S3C64XX_GPH8_EINT_G6_8 (0x07 << 0) - -#define S3C64XX_GPH9_OUTPUT (0x01 << 4) -#define S3C64XX_GPH9_MMC1_DATA7 (0x02 << 4) -#define S3C64XX_GPH9_MMC2_DATA3 (0x03 << 4) -#define S3C64XX_GPH9_I2S_V40_DI (0x05 << 4) -#define S3C64XX_GPH9_EINT_G6_9 (0x07 << 4) diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-i.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-i.h deleted file mode 100644 index ce9ebe335566..000000000000 --- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-i.h +++ /dev/null @@ -1,40 +0,0 @@ -/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-i.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank I register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPICON (S3C64XX_GPI_BASE + 0x00) -#define S3C64XX_GPIDAT (S3C64XX_GPI_BASE + 0x04) -#define S3C64XX_GPIPUD (S3C64XX_GPI_BASE + 0x08) -#define S3C64XX_GPICONSLP (S3C64XX_GPI_BASE + 0x0c) -#define S3C64XX_GPIPUDSLP (S3C64XX_GPI_BASE + 0x10) - -#define S3C64XX_GPI_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) -#define S3C64XX_GPI_INPUT(__gpio) (0x0 << ((__gpio) * 2)) -#define S3C64XX_GPI_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) - -#define S3C64XX_GPI0_VD0 (0x02 << 0) -#define S3C64XX_GPI1_VD1 (0x02 << 2) -#define S3C64XX_GPI2_VD2 (0x02 << 4) -#define S3C64XX_GPI3_VD3 (0x02 << 6) -#define S3C64XX_GPI4_VD4 (0x02 << 8) -#define S3C64XX_GPI5_VD5 (0x02 << 10) -#define S3C64XX_GPI6_VD6 (0x02 << 12) -#define S3C64XX_GPI7_VD7 (0x02 << 14) -#define S3C64XX_GPI8_VD8 (0x02 << 16) -#define S3C64XX_GPI9_VD9 (0x02 << 18) -#define S3C64XX_GPI10_VD10 (0x02 << 20) -#define S3C64XX_GPI11_VD11 (0x02 << 22) -#define S3C64XX_GPI12_VD12 (0x02 << 24) -#define S3C64XX_GPI13_VD13 (0x02 << 26) -#define S3C64XX_GPI14_VD14 (0x02 << 28) -#define S3C64XX_GPI15_VD15 (0x02 << 30) diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-j.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-j.h deleted file mode 100644 index 21a906299d30..000000000000 --- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-j.h +++ /dev/null @@ -1,36 +0,0 @@ -/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-j.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank J register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPJCON (S3C64XX_GPJ_BASE + 0x00) -#define S3C64XX_GPJDAT (S3C64XX_GPJ_BASE + 0x04) -#define S3C64XX_GPJPUD (S3C64XX_GPJ_BASE + 0x08) -#define S3C64XX_GPJCONSLP (S3C64XX_GPJ_BASE + 0x0c) -#define S3C64XX_GPJPUDSLP (S3C64XX_GPJ_BASE + 0x10) - -#define S3C64XX_GPJ_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) -#define S3C64XX_GPJ_INPUT(__gpio) (0x0 << ((__gpio) * 2)) -#define S3C64XX_GPJ_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) - -#define S3C64XX_GPJ0_VD16 (0x02 << 0) -#define S3C64XX_GPJ1_VD17 (0x02 << 2) -#define S3C64XX_GPJ2_VD18 (0x02 << 4) -#define S3C64XX_GPJ3_VD19 (0x02 << 6) -#define S3C64XX_GPJ4_VD20 (0x02 << 8) -#define S3C64XX_GPJ5_VD21 (0x02 << 10) -#define S3C64XX_GPJ6_VD22 (0x02 << 12) -#define S3C64XX_GPJ7_VD23 (0x02 << 14) -#define S3C64XX_GPJ8_LCD_HSYNC (0x02 << 16) -#define S3C64XX_GPJ9_LCD_VSYNC (0x02 << 18) -#define S3C64XX_GPJ10_LCD_VDEN (0x02 << 20) -#define S3C64XX_GPJ11_LCD_VCLK (0x02 << 22) diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-n.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-n.h deleted file mode 100644 index 569e76120881..000000000000 --- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-n.h +++ /dev/null @@ -1,54 +0,0 @@ -/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-n.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank N register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPNCON (S3C64XX_GPN_BASE + 0x00) -#define S3C64XX_GPNDAT (S3C64XX_GPN_BASE + 0x04) -#define S3C64XX_GPNPUD (S3C64XX_GPN_BASE + 0x08) - -#define S3C64XX_GPN_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) -#define S3C64XX_GPN_INPUT(__gpio) (0x0 << ((__gpio) * 2)) -#define S3C64XX_GPN_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) - -#define S3C64XX_GPN0_EINT0 (0x02 << 0) -#define S3C64XX_GPN0_KP_ROW0 (0x03 << 0) - -#define S3C64XX_GPN1_EINT1 (0x02 << 2) -#define S3C64XX_GPN1_KP_ROW1 (0x03 << 2) - -#define S3C64XX_GPN2_EINT2 (0x02 << 4) -#define S3C64XX_GPN2_KP_ROW2 (0x03 << 4) - -#define S3C64XX_GPN3_EINT3 (0x02 << 6) -#define S3C64XX_GPN3_KP_ROW3 (0x03 << 6) - -#define S3C64XX_GPN4_EINT4 (0x02 << 8) -#define S3C64XX_GPN4_KP_ROW4 (0x03 << 8) - -#define S3C64XX_GPN5_EINT5 (0x02 << 10) -#define S3C64XX_GPN5_KP_ROW5 (0x03 << 10) - -#define S3C64XX_GPN6_EINT6 (0x02 << 12) -#define S3C64XX_GPN6_KP_ROW6 (0x03 << 12) - -#define S3C64XX_GPN7_EINT7 (0x02 << 14) -#define S3C64XX_GPN7_KP_ROW7 (0x03 << 14) - -#define S3C64XX_GPN8_EINT8 (0x02 << 16) -#define S3C64XX_GPN9_EINT9 (0x02 << 18) -#define S3C64XX_GPN10_EINT10 (0x02 << 20) -#define S3C64XX_GPN11_EINT11 (0x02 << 22) -#define S3C64XX_GPN12_EINT12 (0x02 << 24) -#define S3C64XX_GPN13_EINT13 (0x02 << 26) -#define S3C64XX_GPN14_EINT14 (0x02 << 28) -#define S3C64XX_GPN15_EINT15 (0x02 << 30) diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-o.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-o.h deleted file mode 100644 index b09e12954b57..000000000000 --- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-o.h +++ /dev/null @@ -1,70 +0,0 @@ -/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-o.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank O register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPOCON (S3C64XX_GPO_BASE + 0x00) -#define S3C64XX_GPODAT (S3C64XX_GPO_BASE + 0x04) -#define S3C64XX_GPOPUD (S3C64XX_GPO_BASE + 0x08) -#define S3C64XX_GPOCONSLP (S3C64XX_GPO_BASE + 0x0c) -#define S3C64XX_GPOPUDSLP (S3C64XX_GPO_BASE + 0x10) - -#define S3C64XX_GPO_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) -#define S3C64XX_GPO_INPUT(__gpio) (0x0 << ((__gpio) * 2)) -#define S3C64XX_GPO_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) - -#define S3C64XX_GPO0_MEM0_nCS2 (0x02 << 0) -#define S3C64XX_GPO0_EINT_G7_0 (0x03 << 0) - -#define S3C64XX_GPO1_MEM0_nCS3 (0x02 << 2) -#define S3C64XX_GPO1_EINT_G7_1 (0x03 << 2) - -#define S3C64XX_GPO2_MEM0_nCS4 (0x02 << 4) -#define S3C64XX_GPO2_EINT_G7_2 (0x03 << 4) - -#define S3C64XX_GPO3_MEM0_nCS5 (0x02 << 6) -#define S3C64XX_GPO3_EINT_G7_3 (0x03 << 6) - -#define S3C64XX_GPO4_EINT_G7_4 (0x03 << 8) - -#define S3C64XX_GPO5_EINT_G7_5 (0x03 << 10) - -#define S3C64XX_GPO6_MEM0_ADDR6 (0x02 << 12) -#define S3C64XX_GPO6_EINT_G7_6 (0x03 << 12) - -#define S3C64XX_GPO7_MEM0_ADDR7 (0x02 << 14) -#define S3C64XX_GPO7_EINT_G7_7 (0x03 << 14) - -#define S3C64XX_GPO8_MEM0_ADDR8 (0x02 << 16) -#define S3C64XX_GPO8_EINT_G7_8 (0x03 << 16) - -#define S3C64XX_GPO9_MEM0_ADDR9 (0x02 << 18) -#define S3C64XX_GPO9_EINT_G7_9 (0x03 << 18) - -#define S3C64XX_GPO10_MEM0_ADDR10 (0x02 << 20) -#define S3C64XX_GPO10_EINT_G7_10 (0x03 << 20) - -#define S3C64XX_GPO11_MEM0_ADDR11 (0x02 << 22) -#define S3C64XX_GPO11_EINT_G7_11 (0x03 << 22) - -#define S3C64XX_GPO12_MEM0_ADDR12 (0x02 << 24) -#define S3C64XX_GPO12_EINT_G7_12 (0x03 << 24) - -#define S3C64XX_GPO13_MEM0_ADDR13 (0x02 << 26) -#define S3C64XX_GPO13_EINT_G7_13 (0x03 << 26) - -#define S3C64XX_GPO14_MEM0_ADDR14 (0x02 << 28) -#define S3C64XX_GPO14_EINT_G7_14 (0x03 << 28) - -#define S3C64XX_GPO15_MEM0_ADDR15 (0x02 << 30) -#define S3C64XX_GPO15_EINT_G7_15 (0x03 << 30) - diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-p.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-p.h deleted file mode 100644 index 92f00517926b..000000000000 --- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-p.h +++ /dev/null @@ -1,69 +0,0 @@ -/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-p.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank P register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPPCON (S3C64XX_GPP_BASE + 0x00) -#define S3C64XX_GPPDAT (S3C64XX_GPP_BASE + 0x04) -#define S3C64XX_GPPPUD (S3C64XX_GPP_BASE + 0x08) -#define S3C64XX_GPPCONSLP (S3C64XX_GPP_BASE + 0x0c) -#define S3C64XX_GPPPUDSLP (S3C64XX_GPP_BASE + 0x10) - -#define S3C64XX_GPP_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) -#define S3C64XX_GPP_INPUT(__gpio) (0x0 << ((__gpio) * 2)) -#define S3C64XX_GPP_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) - -#define S3C64XX_GPP0_MEM0_ADDRV (0x02 << 0) -#define S3C64XX_GPP0_EINT_G8_0 (0x03 << 0) - -#define S3C64XX_GPP1_MEM0_SMCLK (0x02 << 2) -#define S3C64XX_GPP1_EINT_G8_1 (0x03 << 2) - -#define S3C64XX_GPP2_MEM0_nWAIT (0x02 << 4) -#define S3C64XX_GPP2_EINT_G8_2 (0x03 << 4) - -#define S3C64XX_GPP3_MEM0_RDY0_ALE (0x02 << 6) -#define S3C64XX_GPP3_EINT_G8_3 (0x03 << 6) - -#define S3C64XX_GPP4_MEM0_RDY1_CLE (0x02 << 8) -#define S3C64XX_GPP4_EINT_G8_4 (0x03 << 8) - -#define S3C64XX_GPP5_MEM0_INTsm0_FWE (0x02 << 10) -#define S3C64XX_GPP5_EINT_G8_5 (0x03 << 10) - -#define S3C64XX_GPP6_MEM0_(null) (0x02 << 12) -#define S3C64XX_GPP6_EINT_G8_6 (0x03 << 12) - -#define S3C64XX_GPP7_MEM0_INTsm1_FRE (0x02 << 14) -#define S3C64XX_GPP7_EINT_G8_7 (0x03 << 14) - -#define S3C64XX_GPP8_MEM0_RPn_RnB (0x02 << 16) -#define S3C64XX_GPP8_EINT_G8_8 (0x03 << 16) - -#define S3C64XX_GPP9_MEM0_ATA_RESET (0x02 << 18) -#define S3C64XX_GPP9_EINT_G8_9 (0x03 << 18) - -#define S3C64XX_GPP10_MEM0_ATA_INPACK (0x02 << 20) -#define S3C64XX_GPP10_EINT_G8_10 (0x03 << 20) - -#define S3C64XX_GPP11_MEM0_ATA_REG (0x02 << 22) -#define S3C64XX_GPP11_EINT_G8_11 (0x03 << 22) - -#define S3C64XX_GPP12_MEM0_ATA_WE (0x02 << 24) -#define S3C64XX_GPP12_EINT_G8_12 (0x03 << 24) - -#define S3C64XX_GPP13_MEM0_ATA_OE (0x02 << 26) -#define S3C64XX_GPP13_EINT_G8_13 (0x03 << 26) - -#define S3C64XX_GPP14_MEM0_ATA_CD (0x02 << 28) -#define S3C64XX_GPP14_EINT_G8_14 (0x03 << 28) - diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-q.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-q.h deleted file mode 100644 index 565e60aaee47..000000000000 --- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-q.h +++ /dev/null @@ -1,46 +0,0 @@ -/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-q.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank Q register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPQCON (S3C64XX_GPQ_BASE + 0x00) -#define S3C64XX_GPQDAT (S3C64XX_GPQ_BASE + 0x04) -#define S3C64XX_GPQPUD (S3C64XX_GPQ_BASE + 0x08) -#define S3C64XX_GPQCONSLP (S3C64XX_GPQ_BASE + 0x0c) -#define S3C64XX_GPQPUDSLP (S3C64XX_GPQ_BASE + 0x10) - -#define S3C64XX_GPQ_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) -#define S3C64XX_GPQ_INPUT(__gpio) (0x0 << ((__gpio) * 2)) -#define S3C64XX_GPQ_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) - -#define S3C64XX_GPQ0_MEM0_ADDR18_RAS (0x02 << 0) -#define S3C64XX_GPQ0_EINT_G9_0 (0x03 << 0) - -#define S3C64XX_GPQ1_MEM0_ADDR19_CAS (0x02 << 2) -#define S3C64XX_GPQ1_EINT_G9_1 (0x03 << 2) - -#define S3C64XX_GPQ2_EINT_G9_2 (0x03 << 4) - -#define S3C64XX_GPQ3_EINT_G9_3 (0x03 << 6) - -#define S3C64XX_GPQ4_EINT_G9_4 (0x03 << 8) - -#define S3C64XX_GPQ5_EINT_G9_5 (0x03 << 10) - -#define S3C64XX_GPQ6_EINT_G9_6 (0x03 << 12) - -#define S3C64XX_GPQ7_MEM0_ADDR17_WENDMC (0x02 << 14) -#define S3C64XX_GPQ7_EINT_G9_7 (0x03 << 14) - -#define S3C64XX_GPQ8_MEM0_ADDR16_APDMC (0x02 << 16) -#define S3C64XX_GPQ8_EINT_G9_8 (0x03 << 16) - diff --git a/arch/arm/plat-s3c64xx/include/plat/irqs.h b/arch/arm/plat-s3c64xx/include/plat/irqs.h deleted file mode 100644 index 7956fd3bb194..000000000000 --- a/arch/arm/plat-s3c64xx/include/plat/irqs.h +++ /dev/null @@ -1,210 +0,0 @@ -/* linux/arch/arm/plat-s3c64xx/include/mach/irqs.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C64XX - Common IRQ support - */ - -#ifndef __ASM_PLAT_S3C64XX_IRQS_H -#define __ASM_PLAT_S3C64XX_IRQS_H __FILE__ - -/* we keep the first set of CPU IRQs out of the range of - * the ISA space, so that the PC104 has them to itself - * and we don't end up having to do horrible things to the - * standard ISA drivers.... - * - * note, since we're using the VICs, our start must be a - * mulitple of 32 to allow the common code to work - */ - -#define S3C_IRQ_OFFSET (32) - -#define S3C_IRQ(x) ((x) + S3C_IRQ_OFFSET) - -#define S3C_VIC0_BASE S3C_IRQ(0) -#define S3C_VIC1_BASE S3C_IRQ(32) - -/* UART interrupts, each UART has 4 intterupts per channel so - * use the space between the ISA and S3C main interrupts. Note, these - * are not in the same order as the S3C24XX series! */ - -#define IRQ_S3CUART_BASE0 (16) -#define IRQ_S3CUART_BASE1 (20) -#define IRQ_S3CUART_BASE2 (24) -#define IRQ_S3CUART_BASE3 (28) - -#define UART_IRQ_RXD (0) -#define UART_IRQ_ERR (1) -#define UART_IRQ_TXD (2) -#define UART_IRQ_MODEM (3) - -#define IRQ_S3CUART_RX0 (IRQ_S3CUART_BASE0 + UART_IRQ_RXD) -#define IRQ_S3CUART_TX0 (IRQ_S3CUART_BASE0 + UART_IRQ_TXD) -#define IRQ_S3CUART_ERR0 (IRQ_S3CUART_BASE0 + UART_IRQ_ERR) - -#define IRQ_S3CUART_RX1 (IRQ_S3CUART_BASE1 + UART_IRQ_RXD) -#define IRQ_S3CUART_TX1 (IRQ_S3CUART_BASE1 + UART_IRQ_TXD) -#define IRQ_S3CUART_ERR1 (IRQ_S3CUART_BASE1 + UART_IRQ_ERR) - -#define IRQ_S3CUART_RX2 (IRQ_S3CUART_BASE2 + UART_IRQ_RXD) -#define IRQ_S3CUART_TX2 (IRQ_S3CUART_BASE2 + UART_IRQ_TXD) -#define IRQ_S3CUART_ERR2 (IRQ_S3CUART_BASE2 + UART_IRQ_ERR) - -#define IRQ_S3CUART_RX3 (IRQ_S3CUART_BASE3 + UART_IRQ_RXD) -#define IRQ_S3CUART_TX3 (IRQ_S3CUART_BASE3 + UART_IRQ_TXD) -#define IRQ_S3CUART_ERR3 (IRQ_S3CUART_BASE3 + UART_IRQ_ERR) - -/* VIC based IRQs */ - -#define S3C64XX_IRQ_VIC0(x) (S3C_VIC0_BASE + (x)) -#define S3C64XX_IRQ_VIC1(x) (S3C_VIC1_BASE + (x)) - -/* VIC0 */ - -#define IRQ_EINT0_3 S3C64XX_IRQ_VIC0(0) -#define IRQ_EINT4_11 S3C64XX_IRQ_VIC0(1) -#define IRQ_RTC_TIC S3C64XX_IRQ_VIC0(2) -#define IRQ_CAMIF_C S3C64XX_IRQ_VIC0(3) -#define IRQ_CAMIF_P S3C64XX_IRQ_VIC0(4) -#define IRQ_CAMIF_MC S3C64XX_IRQ_VIC0(5) -#define IRQ_S3C6410_IIC1 S3C64XX_IRQ_VIC0(5) -#define IRQ_S3C6410_IIS S3C64XX_IRQ_VIC0(6) -#define IRQ_S3C6400_CAMIF_MP S3C64XX_IRQ_VIC0(6) -#define IRQ_CAMIF_WE_C S3C64XX_IRQ_VIC0(7) -#define IRQ_S3C6410_G3D S3C64XX_IRQ_VIC0(8) -#define IRQ_S3C6400_CAMIF_WE_P S3C64XX_IRQ_VIC0(8) -#define IRQ_POST0 S3C64XX_IRQ_VIC0(9) -#define IRQ_ROTATOR S3C64XX_IRQ_VIC0(10) -#define IRQ_2D S3C64XX_IRQ_VIC0(11) -#define IRQ_TVENC S3C64XX_IRQ_VIC0(12) -#define IRQ_SCALER S3C64XX_IRQ_VIC0(13) -#define IRQ_BATF S3C64XX_IRQ_VIC0(14) -#define IRQ_JPEG S3C64XX_IRQ_VIC0(15) -#define IRQ_MFC S3C64XX_IRQ_VIC0(16) -#define IRQ_SDMA0 S3C64XX_IRQ_VIC0(17) -#define IRQ_SDMA1 S3C64XX_IRQ_VIC0(18) -#define IRQ_ARM_DMAERR S3C64XX_IRQ_VIC0(19) -#define IRQ_ARM_DMA S3C64XX_IRQ_VIC0(20) -#define IRQ_ARM_DMAS S3C64XX_IRQ_VIC0(21) -#define IRQ_KEYPAD S3C64XX_IRQ_VIC0(22) -#define IRQ_TIMER0_VIC S3C64XX_IRQ_VIC0(23) -#define IRQ_TIMER1_VIC S3C64XX_IRQ_VIC0(24) -#define IRQ_TIMER2_VIC S3C64XX_IRQ_VIC0(25) -#define IRQ_WDT S3C64XX_IRQ_VIC0(26) -#define IRQ_TIMER3_VIC S3C64XX_IRQ_VIC0(27) -#define IRQ_TIMER4_VIC S3C64XX_IRQ_VIC0(28) -#define IRQ_LCD_FIFO S3C64XX_IRQ_VIC0(29) -#define IRQ_LCD_VSYNC S3C64XX_IRQ_VIC0(30) -#define IRQ_LCD_SYSTEM S3C64XX_IRQ_VIC0(31) - -/* VIC1 */ - -#define IRQ_EINT12_19 S3C64XX_IRQ_VIC1(0) -#define IRQ_EINT20_27 S3C64XX_IRQ_VIC1(1) -#define IRQ_PCM0 S3C64XX_IRQ_VIC1(2) -#define IRQ_PCM1 S3C64XX_IRQ_VIC1(3) -#define IRQ_AC97 S3C64XX_IRQ_VIC1(4) -#define IRQ_UART0 S3C64XX_IRQ_VIC1(5) -#define IRQ_UART1 S3C64XX_IRQ_VIC1(6) -#define IRQ_UART2 S3C64XX_IRQ_VIC1(7) -#define IRQ_UART3 S3C64XX_IRQ_VIC1(8) -#define IRQ_DMA0 S3C64XX_IRQ_VIC1(9) -#define IRQ_DMA1 S3C64XX_IRQ_VIC1(10) -#define IRQ_ONENAND0 S3C64XX_IRQ_VIC1(11) -#define IRQ_ONENAND1 S3C64XX_IRQ_VIC1(12) -#define IRQ_NFC S3C64XX_IRQ_VIC1(13) -#define IRQ_CFCON S3C64XX_IRQ_VIC1(14) -#define IRQ_USBH S3C64XX_IRQ_VIC1(15) -#define IRQ_SPI0 S3C64XX_IRQ_VIC1(16) -#define IRQ_SPI1 S3C64XX_IRQ_VIC1(17) -#define IRQ_IIC S3C64XX_IRQ_VIC1(18) -#define IRQ_HSItx S3C64XX_IRQ_VIC1(19) -#define IRQ_HSIrx S3C64XX_IRQ_VIC1(20) -#define IRQ_RESERVED S3C64XX_IRQ_VIC1(21) -#define IRQ_MSM S3C64XX_IRQ_VIC1(22) -#define IRQ_HOSTIF S3C64XX_IRQ_VIC1(23) -#define IRQ_HSMMC0 S3C64XX_IRQ_VIC1(24) -#define IRQ_HSMMC1 S3C64XX_IRQ_VIC1(25) -#define IRQ_HSMMC2 IRQ_SPI1 /* shared with SPI1 */ -#define IRQ_OTG S3C64XX_IRQ_VIC1(26) -#define IRQ_IRDA S3C64XX_IRQ_VIC1(27) -#define IRQ_RTC_ALARM S3C64XX_IRQ_VIC1(28) -#define IRQ_SEC S3C64XX_IRQ_VIC1(29) -#define IRQ_PENDN S3C64XX_IRQ_VIC1(30) -#define IRQ_TC IRQ_PENDN -#define IRQ_ADC S3C64XX_IRQ_VIC1(31) - -#define S3C64XX_TIMER_IRQ(x) S3C_IRQ(64 + (x)) - -#define IRQ_TIMER0 S3C64XX_TIMER_IRQ(0) -#define IRQ_TIMER1 S3C64XX_TIMER_IRQ(1) -#define IRQ_TIMER2 S3C64XX_TIMER_IRQ(2) -#define IRQ_TIMER3 S3C64XX_TIMER_IRQ(3) -#define IRQ_TIMER4 S3C64XX_TIMER_IRQ(4) - -/* compatibility for device defines */ - -#define IRQ_IIC1 IRQ_S3C6410_IIC1 - -/* Since the IRQ_EINT(x) are a linear mapping on current s3c64xx series - * we just defined them as an IRQ_EINT(x) macro from S3C_IRQ_EINT_BASE - * which we place after the pair of VICs. */ - -#define S3C_IRQ_EINT_BASE S3C_IRQ(64+5) - -#define S3C_EINT(x) ((x) + S3C_IRQ_EINT_BASE) -#define IRQ_EINT(x) S3C_EINT(x) -#define IRQ_EINT_BIT(x) ((x) - S3C_EINT(0)) - -/* Next the external interrupt groups. These are similar to the IRQ_EINT(x) - * that they are sourced from the GPIO pins but with a different scheme for - * priority and source indication. - * - * The IRQ_EINT(x) can be thought of as 'group 0' of the available GPIO - * interrupts, but for historical reasons they are kept apart from these - * next interrupts. - * - * Use IRQ_EINT_GROUP(group, offset) to get the number for use in the - * machine specific support files. - */ - -#define IRQ_EINT_GROUP1_NR (15) -#define IRQ_EINT_GROUP2_NR (8) -#define IRQ_EINT_GROUP3_NR (5) -#define IRQ_EINT_GROUP4_NR (14) -#define IRQ_EINT_GROUP5_NR (7) -#define IRQ_EINT_GROUP6_NR (10) -#define IRQ_EINT_GROUP7_NR (16) -#define IRQ_EINT_GROUP8_NR (15) -#define IRQ_EINT_GROUP9_NR (9) - -#define IRQ_EINT_GROUP_BASE S3C_EINT(28) -#define IRQ_EINT_GROUP1_BASE (IRQ_EINT_GROUP_BASE + 0x00) -#define IRQ_EINT_GROUP2_BASE (IRQ_EINT_GROUP1_BASE + IRQ_EINT_GROUP1_NR) -#define IRQ_EINT_GROUP3_BASE (IRQ_EINT_GROUP2_BASE + IRQ_EINT_GROUP2_NR) -#define IRQ_EINT_GROUP4_BASE (IRQ_EINT_GROUP3_BASE + IRQ_EINT_GROUP3_NR) -#define IRQ_EINT_GROUP5_BASE (IRQ_EINT_GROUP4_BASE + IRQ_EINT_GROUP4_NR) -#define IRQ_EINT_GROUP6_BASE (IRQ_EINT_GROUP5_BASE + IRQ_EINT_GROUP5_NR) -#define IRQ_EINT_GROUP7_BASE (IRQ_EINT_GROUP6_BASE + IRQ_EINT_GROUP6_NR) -#define IRQ_EINT_GROUP8_BASE (IRQ_EINT_GROUP7_BASE + IRQ_EINT_GROUP7_NR) -#define IRQ_EINT_GROUP9_BASE (IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR) - -#define IRQ_EINT_GROUP(group, no) (IRQ_EINT_GROUP##group##_BASE + (no)) - -/* Define a group of interrupts for board-specific use (eg, for MFD - * interrupt controllers). */ -#define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1) - -#define IRQ_BOARD_NR 16 - -#define IRQ_BOARD_END (IRQ_BOARD_START + IRQ_BOARD_NR) - -/* Set the default NR_IRQS */ - -#define NR_IRQS (IRQ_BOARD_END + 1) - -#endif /* __ASM_PLAT_S3C64XX_IRQS_H */ - diff --git a/arch/arm/plat-s3c64xx/include/plat/pll.h b/arch/arm/plat-s3c64xx/include/plat/pll.h deleted file mode 100644 index 90bbd72fdc4e..000000000000 --- a/arch/arm/plat-s3c64xx/include/plat/pll.h +++ /dev/null @@ -1,74 +0,0 @@ -/* arch/arm/plat-s3c64xx/include/plat/pll.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C64XX PLL code - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C6400_PLL_MDIV_MASK ((1 << (25-16+1)) - 1) -#define S3C6400_PLL_PDIV_MASK ((1 << (13-8+1)) - 1) -#define S3C6400_PLL_SDIV_MASK ((1 << (2-0+1)) - 1) -#define S3C6400_PLL_MDIV_SHIFT (16) -#define S3C6400_PLL_PDIV_SHIFT (8) -#define S3C6400_PLL_SDIV_SHIFT (0) - -#include <asm/div64.h> - -static inline unsigned long s3c6400_get_pll(unsigned long baseclk, - u32 pllcon) -{ - u32 mdiv, pdiv, sdiv; - u64 fvco = baseclk; - - mdiv = (pllcon >> S3C6400_PLL_MDIV_SHIFT) & S3C6400_PLL_MDIV_MASK; - pdiv = (pllcon >> S3C6400_PLL_PDIV_SHIFT) & S3C6400_PLL_PDIV_MASK; - sdiv = (pllcon >> S3C6400_PLL_SDIV_SHIFT) & S3C6400_PLL_SDIV_MASK; - - fvco *= mdiv; - do_div(fvco, (pdiv << sdiv)); - - return (unsigned long)fvco; -} - -#define S3C6400_EPLL_MDIV_MASK ((1 << (23-16)) - 1) -#define S3C6400_EPLL_PDIV_MASK ((1 << (13-8)) - 1) -#define S3C6400_EPLL_SDIV_MASK ((1 << (2-0)) - 1) -#define S3C6400_EPLL_MDIV_SHIFT (16) -#define S3C6400_EPLL_PDIV_SHIFT (8) -#define S3C6400_EPLL_SDIV_SHIFT (0) -#define S3C6400_EPLL_KDIV_MASK (0xffff) - -static inline unsigned long s3c6400_get_epll(unsigned long baseclk) -{ - unsigned long result; - u32 epll0 = __raw_readl(S3C_EPLL_CON0); - u32 epll1 = __raw_readl(S3C_EPLL_CON1); - u32 mdiv, pdiv, sdiv, kdiv; - u64 tmp; - - mdiv = (epll0 >> S3C6400_EPLL_MDIV_SHIFT) & S3C6400_EPLL_MDIV_MASK; - pdiv = (epll0 >> S3C6400_EPLL_PDIV_SHIFT) & S3C6400_EPLL_PDIV_MASK; - sdiv = (epll0 >> S3C6400_EPLL_SDIV_SHIFT) & S3C6400_EPLL_SDIV_MASK; - kdiv = epll1 & S3C6400_EPLL_KDIV_MASK; - - /* We need to multiple baseclk by mdiv (the integer part) and kdiv - * which is in 2^16ths, so shift mdiv up (does not overflow) and - * add kdiv before multiplying. The use of tmp is to avoid any - * overflows before shifting bac down into result when multipling - * by the mdiv and kdiv pair. - */ - - tmp = baseclk; - tmp *= (mdiv << 16) + kdiv; - do_div(tmp, (pdiv << sdiv)); - result = tmp >> 16; - - return result; -} diff --git a/arch/arm/plat-s3c64xx/include/plat/pm-core.h b/arch/arm/plat-s3c64xx/include/plat/pm-core.h deleted file mode 100644 index d347de3ba0dc..000000000000 --- a/arch/arm/plat-s3c64xx/include/plat/pm-core.h +++ /dev/null @@ -1,98 +0,0 @@ -/* linux/arch/arm/plat-s3c64xx/include/plat/pm-core.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C64XX - PM core support for arch/arm/plat-s3c/pm.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <plat/regs-gpio.h> - -static inline void s3c_pm_debug_init_uart(void) -{ - u32 tmp = __raw_readl(S3C_PCLK_GATE); - - /* As a note, since the S3C64XX UARTs generally have multiple - * clock sources, we simply enable PCLK at the moment and hope - * that the resume settings for the UART are suitable for the - * use with PCLK. - */ - - tmp |= S3C_CLKCON_PCLK_UART0; - tmp |= S3C_CLKCON_PCLK_UART1; - tmp |= S3C_CLKCON_PCLK_UART2; - tmp |= S3C_CLKCON_PCLK_UART3; - - __raw_writel(tmp, S3C_PCLK_GATE); - udelay(10); -} - -static inline void s3c_pm_arch_prepare_irqs(void) -{ - /* VIC should have already been taken care of */ - - /* clear any pending EINT0 interrupts */ - __raw_writel(__raw_readl(S3C64XX_EINT0PEND), S3C64XX_EINT0PEND); -} - -static inline void s3c_pm_arch_stop_clocks(void) -{ -} - -static inline void s3c_pm_arch_show_resume_irqs(void) -{ -} - -/* make these defines, we currently do not have any need to change - * the IRQ wake controls depending on the CPU we are running on */ - -#define s3c_irqwake_eintallow ((1 << 28) - 1) -#define s3c_irqwake_intallow (0) - -static inline void s3c_pm_arch_update_uart(void __iomem *regs, - struct pm_uart_save *save) -{ - u32 ucon = __raw_readl(regs + S3C2410_UCON); - u32 ucon_clk = ucon & S3C6400_UCON_CLKMASK; - u32 save_clk = save->ucon & S3C6400_UCON_CLKMASK; - u32 new_ucon; - u32 delta; - - /* S3C64XX UART blocks only support level interrupts, so ensure that - * when we restore unused UART blocks we force the level interrupt - * settigs. */ - save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL; - - /* We have a constraint on changing the clock type of the UART - * between UCLKx and PCLK, so ensure that when we restore UCON - * that the CLK field is correctly modified if the bootloader - * has changed anything. - */ - if (ucon_clk != save_clk) { - new_ucon = save->ucon; - delta = ucon_clk ^ save_clk; - - /* change from UCLKx => wrong PCLK, - * either UCLK can be tested for by a bit-test - * with UCLK0 */ - if (ucon_clk & S3C6400_UCON_UCLK0 && - !(save_clk & S3C6400_UCON_UCLK0) && - delta & S3C6400_UCON_PCLK2) { - new_ucon &= ~S3C6400_UCON_UCLK0; - } else if (delta == S3C6400_UCON_PCLK2) { - /* as an precaution, don't change from - * PCLK2 => PCLK or vice-versa */ - new_ucon ^= S3C6400_UCON_PCLK2; - } - - S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n", - ucon, new_ucon, save->ucon); - save->ucon = new_ucon; - } -} diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h b/arch/arm/plat-s3c64xx/include/plat/regs-clock.h deleted file mode 100644 index ff46e7fa957a..000000000000 --- a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h +++ /dev/null @@ -1,225 +0,0 @@ -/* arch/arm/plat-s3c64xx/include/plat/regs-clock.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C64XX clock register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __PLAT_REGS_CLOCK_H -#define __PLAT_REGS_CLOCK_H __FILE__ - -#define S3C_CLKREG(x) (S3C_VA_SYS + (x)) - -#define S3C_APLL_LOCK S3C_CLKREG(0x00) -#define S3C_MPLL_LOCK S3C_CLKREG(0x04) -#define S3C_EPLL_LOCK S3C_CLKREG(0x08) -#define S3C_APLL_CON S3C_CLKREG(0x0C) -#define S3C_MPLL_CON S3C_CLKREG(0x10) -#define S3C_EPLL_CON0 S3C_CLKREG(0x14) -#define S3C_EPLL_CON1 S3C_CLKREG(0x18) -#define S3C_CLK_SRC S3C_CLKREG(0x1C) -#define S3C_CLK_DIV0 S3C_CLKREG(0x20) -#define S3C_CLK_DIV1 S3C_CLKREG(0x24) -#define S3C_CLK_DIV2 S3C_CLKREG(0x28) -#define S3C_CLK_OUT S3C_CLKREG(0x2C) -#define S3C_HCLK_GATE S3C_CLKREG(0x30) -#define S3C_PCLK_GATE S3C_CLKREG(0x34) -#define S3C_SCLK_GATE S3C_CLKREG(0x38) -#define S3C_MEM0_GATE S3C_CLKREG(0x3C) - -/* CLKDIV0 */ -#define S3C6400_CLKDIV0_MFC_MASK (0xf << 28) -#define S3C6400_CLKDIV0_MFC_SHIFT (28) -#define S3C6400_CLKDIV0_JPEG_MASK (0xf << 24) -#define S3C6400_CLKDIV0_JPEG_SHIFT (24) -#define S3C6400_CLKDIV0_CAM_MASK (0xf << 20) -#define S3C6400_CLKDIV0_CAM_SHIFT (20) -#define S3C6400_CLKDIV0_SECURITY_MASK (0x3 << 18) -#define S3C6400_CLKDIV0_SECURITY_SHIFT (18) -#define S3C6400_CLKDIV0_PCLK_MASK (0xf << 12) -#define S3C6400_CLKDIV0_PCLK_SHIFT (12) -#define S3C6400_CLKDIV0_HCLK2_MASK (0x7 << 9) -#define S3C6400_CLKDIV0_HCLK2_SHIFT (9) -#define S3C6400_CLKDIV0_HCLK_MASK (0x1 << 8) -#define S3C6400_CLKDIV0_HCLK_SHIFT (8) -#define S3C6400_CLKDIV0_MPLL_MASK (0x1 << 4) -#define S3C6400_CLKDIV0_MPLL_SHIFT (4) -#define S3C6400_CLKDIV0_ARM_MASK (0x7 << 0) -#define S3C6410_CLKDIV0_ARM_MASK (0xf << 0) -#define S3C6400_CLKDIV0_ARM_SHIFT (0) - -/* CLKDIV1 */ -#define S3C6410_CLKDIV1_FIMC_MASK (0xf << 24) -#define S3C6410_CLKDIV1_FIMC_SHIFT (24) -#define S3C6400_CLKDIV1_UHOST_MASK (0xf << 20) -#define S3C6400_CLKDIV1_UHOST_SHIFT (20) -#define S3C6400_CLKDIV1_SCALER_MASK (0xf << 16) -#define S3C6400_CLKDIV1_SCALER_SHIFT (16) -#define S3C6400_CLKDIV1_LCD_MASK (0xf << 12) -#define S3C6400_CLKDIV1_LCD_SHIFT (12) -#define S3C6400_CLKDIV1_MMC2_MASK (0xf << 8) -#define S3C6400_CLKDIV1_MMC2_SHIFT (8) -#define S3C6400_CLKDIV1_MMC1_MASK (0xf << 4) -#define S3C6400_CLKDIV1_MMC1_SHIFT (4) -#define S3C6400_CLKDIV1_MMC0_MASK (0xf << 0) -#define S3C6400_CLKDIV1_MMC0_SHIFT (0) - -/* CLKDIV2 */ -#define S3C6410_CLKDIV2_AUDIO2_MASK (0xf << 24) -#define S3C6410_CLKDIV2_AUDIO2_SHIFT (24) -#define S3C6400_CLKDIV2_IRDA_MASK (0xf << 20) -#define S3C6400_CLKDIV2_IRDA_SHIFT (20) -#define S3C6400_CLKDIV2_UART_MASK (0xf << 16) -#define S3C6400_CLKDIV2_UART_SHIFT (16) -#define S3C6400_CLKDIV2_AUDIO1_MASK (0xf << 12) -#define S3C6400_CLKDIV2_AUDIO1_SHIFT (12) -#define S3C6400_CLKDIV2_AUDIO0_MASK (0xf << 8) -#define S3C6400_CLKDIV2_AUDIO0_SHIFT (8) -#define S3C6400_CLKDIV2_SPI1_MASK (0xf << 4) -#define S3C6400_CLKDIV2_SPI1_SHIFT (4) -#define S3C6400_CLKDIV2_SPI0_MASK (0xf << 0) -#define S3C6400_CLKDIV2_SPI0_SHIFT (0) - -/* HCLK GATE Registers */ -#define S3C_CLKCON_HCLK_3DSE (1<<31) -#define S3C_CLKCON_HCLK_UHOST (1<<29) -#define S3C_CLKCON_HCLK_SECUR (1<<28) -#define S3C_CLKCON_HCLK_SDMA1 (1<<27) -#define S3C_CLKCON_HCLK_SDMA0 (1<<26) -#define S3C_CLKCON_HCLK_IROM (1<<25) -#define S3C_CLKCON_HCLK_DDR1 (1<<24) -#define S3C_CLKCON_HCLK_DDR0 (1<<23) -#define S3C_CLKCON_HCLK_MEM1 (1<<22) -#define S3C_CLKCON_HCLK_MEM0 (1<<21) -#define S3C_CLKCON_HCLK_USB (1<<20) -#define S3C_CLKCON_HCLK_HSMMC2 (1<<19) -#define S3C_CLKCON_HCLK_HSMMC1 (1<<18) -#define S3C_CLKCON_HCLK_HSMMC0 (1<<17) -#define S3C_CLKCON_HCLK_MDP (1<<16) -#define S3C_CLKCON_HCLK_DHOST (1<<15) -#define S3C_CLKCON_HCLK_IHOST (1<<14) -#define S3C_CLKCON_HCLK_DMA1 (1<<13) -#define S3C_CLKCON_HCLK_DMA0 (1<<12) -#define S3C_CLKCON_HCLK_JPEG (1<<11) -#define S3C_CLKCON_HCLK_CAMIF (1<<10) -#define S3C_CLKCON_HCLK_SCALER (1<<9) -#define S3C_CLKCON_HCLK_2D (1<<8) -#define S3C_CLKCON_HCLK_TV (1<<7) -#define S3C_CLKCON_HCLK_POST0 (1<<5) -#define S3C_CLKCON_HCLK_ROT (1<<4) -#define S3C_CLKCON_HCLK_LCD (1<<3) -#define S3C_CLKCON_HCLK_TZIC (1<<2) -#define S3C_CLKCON_HCLK_INTC (1<<1) -#define S3C_CLKCON_HCLK_MFC (1<<0) - -/* PCLK GATE Registers */ -#define S3C6410_CLKCON_PCLK_I2C1 (1<<27) -#define S3C6410_CLKCON_PCLK_IIS2 (1<<26) -#define S3C_CLKCON_PCLK_SKEY (1<<24) -#define S3C_CLKCON_PCLK_CHIPID (1<<23) -#define S3C_CLKCON_PCLK_SPI1 (1<<22) -#define S3C_CLKCON_PCLK_SPI0 (1<<21) -#define S3C_CLKCON_PCLK_HSIRX (1<<20) -#define S3C_CLKCON_PCLK_HSITX (1<<19) -#define S3C_CLKCON_PCLK_GPIO (1<<18) -#define S3C_CLKCON_PCLK_IIC (1<<17) -#define S3C_CLKCON_PCLK_IIS1 (1<<16) -#define S3C_CLKCON_PCLK_IIS0 (1<<15) -#define S3C_CLKCON_PCLK_AC97 (1<<14) -#define S3C_CLKCON_PCLK_TZPC (1<<13) -#define S3C_CLKCON_PCLK_TSADC (1<<12) -#define S3C_CLKCON_PCLK_KEYPAD (1<<11) -#define S3C_CLKCON_PCLK_IRDA (1<<10) -#define S3C_CLKCON_PCLK_PCM1 (1<<9) -#define S3C_CLKCON_PCLK_PCM0 (1<<8) -#define S3C_CLKCON_PCLK_PWM (1<<7) -#define S3C_CLKCON_PCLK_RTC (1<<6) -#define S3C_CLKCON_PCLK_WDT (1<<5) -#define S3C_CLKCON_PCLK_UART3 (1<<4) -#define S3C_CLKCON_PCLK_UART2 (1<<3) -#define S3C_CLKCON_PCLK_UART1 (1<<2) -#define S3C_CLKCON_PCLK_UART0 (1<<1) -#define S3C_CLKCON_PCLK_MFC (1<<0) - -/* SCLK GATE Registers */ -#define S3C_CLKCON_SCLK_UHOST (1<<30) -#define S3C_CLKCON_SCLK_MMC2_48 (1<<29) -#define S3C_CLKCON_SCLK_MMC1_48 (1<<28) -#define S3C_CLKCON_SCLK_MMC0_48 (1<<27) -#define S3C_CLKCON_SCLK_MMC2 (1<<26) -#define S3C_CLKCON_SCLK_MMC1 (1<<25) -#define S3C_CLKCON_SCLK_MMC0 (1<<24) -#define S3C_CLKCON_SCLK_SPI1_48 (1<<23) -#define S3C_CLKCON_SCLK_SPI0_48 (1<<22) -#define S3C_CLKCON_SCLK_SPI1 (1<<21) -#define S3C_CLKCON_SCLK_SPI0 (1<<20) -#define S3C_CLKCON_SCLK_DAC27 (1<<19) -#define S3C_CLKCON_SCLK_TV27 (1<<18) -#define S3C_CLKCON_SCLK_SCALER27 (1<<17) -#define S3C_CLKCON_SCLK_SCALER (1<<16) -#define S3C_CLKCON_SCLK_LCD27 (1<<15) -#define S3C_CLKCON_SCLK_LCD (1<<14) -#define S3C6400_CLKCON_SCLK_POST1_27 (1<<13) -#define S3C6410_CLKCON_FIMC (1<<13) -#define S3C_CLKCON_SCLK_POST0_27 (1<<12) -#define S3C6400_CLKCON_SCLK_POST1 (1<<11) -#define S3C6410_CLKCON_SCLK_AUDIO2 (1<<11) -#define S3C_CLKCON_SCLK_POST0 (1<<10) -#define S3C_CLKCON_SCLK_AUDIO1 (1<<9) -#define S3C_CLKCON_SCLK_AUDIO0 (1<<8) -#define S3C_CLKCON_SCLK_SECUR (1<<7) -#define S3C_CLKCON_SCLK_IRDA (1<<6) -#define S3C_CLKCON_SCLK_UART (1<<5) -#define S3C_CLKCON_SCLK_ONENAND (1<<4) -#define S3C_CLKCON_SCLK_MFC (1<<3) -#define S3C_CLKCON_SCLK_CAM (1<<2) -#define S3C_CLKCON_SCLK_JPEG (1<<1) - -/* CLKSRC */ - -#define S3C6400_CLKSRC_APLL_MOUT (1 << 0) -#define S3C6400_CLKSRC_MPLL_MOUT (1 << 1) -#define S3C6400_CLKSRC_EPLL_MOUT (1 << 2) -#define S3C6400_CLKSRC_APLL_MOUT_SHIFT (0) -#define S3C6400_CLKSRC_MPLL_MOUT_SHIFT (1) -#define S3C6400_CLKSRC_EPLL_MOUT_SHIFT (2) -#define S3C6400_CLKSRC_MFC (1 << 4) - -#define S3C6410_CLKSRC_TV27_MASK (0x1 << 31) -#define S3C6410_CLKSRC_TV27_SHIFT (31) -#define S3C6410_CLKSRC_DAC27_MASK (0x1 << 30) -#define S3C6410_CLKSRC_DAC27_SHIFT (30) -#define S3C6400_CLKSRC_SCALER_MASK (0x3 << 28) -#define S3C6400_CLKSRC_SCALER_SHIFT (28) -#define S3C6400_CLKSRC_LCD_MASK (0x3 << 26) -#define S3C6400_CLKSRC_LCD_SHIFT (26) -#define S3C6400_CLKSRC_IRDA_MASK (0x3 << 24) -#define S3C6400_CLKSRC_IRDA_SHIFT (24) -#define S3C6400_CLKSRC_MMC2_MASK (0x3 << 22) -#define S3C6400_CLKSRC_MMC2_SHIFT (22) -#define S3C6400_CLKSRC_MMC1_MASK (0x3 << 20) -#define S3C6400_CLKSRC_MMC1_SHIFT (20) -#define S3C6400_CLKSRC_MMC0_MASK (0x3 << 18) -#define S3C6400_CLKSRC_MMC0_SHIFT (18) -#define S3C6400_CLKSRC_SPI1_MASK (0x3 << 16) -#define S3C6400_CLKSRC_SPI1_SHIFT (16) -#define S3C6400_CLKSRC_SPI0_MASK (0x3 << 14) -#define S3C6400_CLKSRC_SPI0_SHIFT (14) -#define S3C6400_CLKSRC_UART_MASK (0x1 << 13) -#define S3C6400_CLKSRC_UART_SHIFT (13) -#define S3C6400_CLKSRC_AUDIO1_MASK (0x7 << 10) -#define S3C6400_CLKSRC_AUDIO1_SHIFT (10) -#define S3C6400_CLKSRC_AUDIO0_MASK (0x7 << 7) -#define S3C6400_CLKSRC_AUDIO0_SHIFT (7) -#define S3C6400_CLKSRC_UHOST_MASK (0x3 << 5) -#define S3C6400_CLKSRC_UHOST_SHIFT (5) - - -#endif /* _PLAT_REGS_CLOCK_H */ diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-gpio-memport.h b/arch/arm/plat-s3c64xx/include/plat/regs-gpio-memport.h deleted file mode 100644 index 82342f6fd27d..000000000000 --- a/arch/arm/plat-s3c64xx/include/plat/regs-gpio-memport.h +++ /dev/null @@ -1,25 +0,0 @@ -/* linux/arch/arm/plat-s3c64xx/include/mach/regs-gpio-memport.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C64XX - GPIO memory port register definitions - */ - -#ifndef __ASM_PLAT_S3C64XX_REGS_GPIO_MEMPORT_H -#define __ASM_PLAT_S3C64XX_REGS_GPIO_MEMPORT_H __FILE__ - -#define S3C64XX_MEM0CONSTOP S3C64XX_GPIOREG(0x1B0) -#define S3C64XX_MEM1CONSTOP S3C64XX_GPIOREG(0x1B4) - -#define S3C64XX_MEM0CONSLP0 S3C64XX_GPIOREG(0x1C0) -#define S3C64XX_MEM0CONSLP1 S3C64XX_GPIOREG(0x1C4) -#define S3C64XX_MEM1CONSLP S3C64XX_GPIOREG(0x1C8) - -#define S3C64XX_MEM0DRVCON S3C64XX_GPIOREG(0x1D0) -#define S3C64XX_MEM1DRVCON S3C64XX_GPIOREG(0x1D4) - -#endif /* __ASM_PLAT_S3C64XX_REGS_GPIO_MEMPORT_H */ - diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-gpio.h b/arch/arm/plat-s3c64xx/include/plat/regs-gpio.h deleted file mode 100644 index 81f7f6e6832e..000000000000 --- a/arch/arm/plat-s3c64xx/include/plat/regs-gpio.h +++ /dev/null @@ -1,187 +0,0 @@ -/* linux/arch/arm/plat-s3c64xx/include/mach/regs-gpio.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C64XX - GPIO register definitions - */ - -#ifndef __ASM_PLAT_S3C64XX_REGS_GPIO_H -#define __ASM_PLAT_S3C64XX_REGS_GPIO_H __FILE__ - -/* Base addresses for each of the banks */ - -#define S3C64XX_GPIOREG(reg) (S3C64XX_VA_GPIO + (reg)) - -#define S3C64XX_GPA_BASE S3C64XX_GPIOREG(0x0000) -#define S3C64XX_GPB_BASE S3C64XX_GPIOREG(0x0020) -#define S3C64XX_GPC_BASE S3C64XX_GPIOREG(0x0040) -#define S3C64XX_GPD_BASE S3C64XX_GPIOREG(0x0060) -#define S3C64XX_GPE_BASE S3C64XX_GPIOREG(0x0080) -#define S3C64XX_GPF_BASE S3C64XX_GPIOREG(0x00A0) -#define S3C64XX_GPG_BASE S3C64XX_GPIOREG(0x00C0) -#define S3C64XX_GPH_BASE S3C64XX_GPIOREG(0x00E0) -#define S3C64XX_GPI_BASE S3C64XX_GPIOREG(0x0100) -#define S3C64XX_GPJ_BASE S3C64XX_GPIOREG(0x0120) -#define S3C64XX_GPK_BASE S3C64XX_GPIOREG(0x0800) -#define S3C64XX_GPL_BASE S3C64XX_GPIOREG(0x0810) -#define S3C64XX_GPM_BASE S3C64XX_GPIOREG(0x0820) -#define S3C64XX_GPN_BASE S3C64XX_GPIOREG(0x0830) -#define S3C64XX_GPO_BASE S3C64XX_GPIOREG(0x0140) -#define S3C64XX_GPP_BASE S3C64XX_GPIOREG(0x0160) -#define S3C64XX_GPQ_BASE S3C64XX_GPIOREG(0x0180) - -/* SPCON */ - -#define S3C64XX_SPCON S3C64XX_GPIOREG(0x1A0) - -#define S3C64XX_SPCON_DRVCON_CAM_MASK (0x3 << 30) -#define S3C64XX_SPCON_DRVCON_CAM_SHIFT (30) -#define S3C64XX_SPCON_DRVCON_CAM_2mA (0x0 << 30) -#define S3C64XX_SPCON_DRVCON_CAM_4mA (0x1 << 30) -#define S3C64XX_SPCON_DRVCON_CAM_7mA (0x2 << 30) -#define S3C64XX_SPCON_DRVCON_CAM_9mA (0x3 << 30) - -#define S3C64XX_SPCON_DRVCON_HSSPI_MASK (0x3 << 28) -#define S3C64XX_SPCON_DRVCON_HSSPI_SHIFT (28) -#define S3C64XX_SPCON_DRVCON_HSSPI_2mA (0x0 << 28) -#define S3C64XX_SPCON_DRVCON_HSSPI_4mA (0x1 << 28) -#define S3C64XX_SPCON_DRVCON_HSSPI_7mA (0x2 << 28) -#define S3C64XX_SPCON_DRVCON_HSSPI_9mA (0x3 << 28) - -#define S3C64XX_SPCON_DRVCON_HSMMC_MASK (0x3 << 26) -#define S3C64XX_SPCON_DRVCON_HSMMC_SHIFT (26) -#define S3C64XX_SPCON_DRVCON_HSMMC_2mA (0x0 << 26) -#define S3C64XX_SPCON_DRVCON_HSMMC_4mA (0x1 << 26) -#define S3C64XX_SPCON_DRVCON_HSMMC_7mA (0x2 << 26) -#define S3C64XX_SPCON_DRVCON_HSMMC_9mA (0x3 << 26) - -#define S3C64XX_SPCON_DRVCON_LCD_MASK (0x3 << 24) -#define S3C64XX_SPCON_DRVCON_LCD_SHIFT (24) -#define S3C64XX_SPCON_DRVCON_LCD_2mA (0x0 << 24) -#define S3C64XX_SPCON_DRVCON_LCD_4mA (0x1 << 24) -#define S3C64XX_SPCON_DRVCON_LCD_7mA (0x2 << 24) -#define S3C64XX_SPCON_DRVCON_LCD_9mA (0x3 << 24) - -#define S3C64XX_SPCON_DRVCON_MODEM_MASK (0x3 << 22) -#define S3C64XX_SPCON_DRVCON_MODEM_SHIFT (22) -#define S3C64XX_SPCON_DRVCON_MODEM_2mA (0x0 << 22) -#define S3C64XX_SPCON_DRVCON_MODEM_4mA (0x1 << 22) -#define S3C64XX_SPCON_DRVCON_MODEM_7mA (0x2 << 22) -#define S3C64XX_SPCON_DRVCON_MODEM_9mA (0x3 << 22) - -#define S3C64XX_SPCON_nRSTOUT_OEN (1 << 21) - -#define S3C64XX_SPCON_DRVCON_SPICLK1_MASK (0x3 << 18) -#define S3C64XX_SPCON_DRVCON_SPICLK1_SHIFT (18) -#define S3C64XX_SPCON_DRVCON_SPICLK1_2mA (0x0 << 18) -#define S3C64XX_SPCON_DRVCON_SPICLK1_4mA (0x1 << 18) -#define S3C64XX_SPCON_DRVCON_SPICLK1_7mA (0x2 << 18) -#define S3C64XX_SPCON_DRVCON_SPICLK1_9mA (0x3 << 18) - -#define S3C64XX_SPCON_MEM1_DQS_PUD_MASK (0x3 << 16) -#define S3C64XX_SPCON_MEM1_DQS_PUD_SHIFT (16) -#define S3C64XX_SPCON_MEM1_DQS_PUD_DISABLED (0x0 << 16) -#define S3C64XX_SPCON_MEM1_DQS_PUD_DOWN (0x1 << 16) -#define S3C64XX_SPCON_MEM1_DQS_PUD_UP (0x2 << 16) - -#define S3C64XX_SPCON_MEM1_D_PUD1_MASK (0x3 << 14) -#define S3C64XX_SPCON_MEM1_D_PUD1_SHIFT (14) -#define S3C64XX_SPCON_MEM1_D_PUD1_DISABLED (0x0 << 14) -#define S3C64XX_SPCON_MEM1_D_PUD1_DOWN (0x1 << 14) -#define S3C64XX_SPCON_MEM1_D_PUD1_UP (0x2 << 14) - -#define S3C64XX_SPCON_MEM1_D_PUD0_MASK (0x3 << 12) -#define S3C64XX_SPCON_MEM1_D_PUD0_SHIFT (12) -#define S3C64XX_SPCON_MEM1_D_PUD0_DISABLED (0x0 << 12) -#define S3C64XX_SPCON_MEM1_D_PUD0_DOWN (0x1 << 12) -#define S3C64XX_SPCON_MEM1_D_PUD0_UP (0x2 << 12) - -#define S3C64XX_SPCON_MEM0_D_PUD_MASK (0x3 << 8) -#define S3C64XX_SPCON_MEM0_D_PUD_SHIFT (8) -#define S3C64XX_SPCON_MEM0_D_PUD_DISABLED (0x0 << 8) -#define S3C64XX_SPCON_MEM0_D_PUD_DOWN (0x1 << 8) -#define S3C64XX_SPCON_MEM0_D_PUD_UP (0x2 << 8) - -#define S3C64XX_SPCON_USBH_DMPD (1 << 7) -#define S3C64XX_SPCON_USBH_DPPD (1 << 6) -#define S3C64XX_SPCON_USBH_PUSW2 (1 << 5) -#define S3C64XX_SPCON_USBH_PUSW1 (1 << 4) -#define S3C64XX_SPCON_USBH_SUSPND (1 << 3) - -#define S3C64XX_SPCON_LCD_SEL_MASK (0x3 << 0) -#define S3C64XX_SPCON_LCD_SEL_SHIFT (0) -#define S3C64XX_SPCON_LCD_SEL_HOST (0x0 << 0) -#define S3C64XX_SPCON_LCD_SEL_RGB (0x1 << 0) -#define S3C64XX_SPCON_LCD_SEL_606_656 (0x2 << 0) - - -/* External interrupt registers */ - -#define S3C64XX_EINT12CON S3C64XX_GPIOREG(0x200) -#define S3C64XX_EINT34CON S3C64XX_GPIOREG(0x204) -#define S3C64XX_EINT56CON S3C64XX_GPIOREG(0x208) -#define S3C64XX_EINT78CON S3C64XX_GPIOREG(0x20C) -#define S3C64XX_EINT9CON S3C64XX_GPIOREG(0x210) - -#define S3C64XX_EINT12FLTCON S3C64XX_GPIOREG(0x220) -#define S3C64XX_EINT34FLTCON S3C64XX_GPIOREG(0x224) -#define S3C64XX_EINT56FLTCON S3C64XX_GPIOREG(0x228) -#define S3C64XX_EINT78FLTCON S3C64XX_GPIOREG(0x22C) -#define S3C64XX_EINT9FLTCON S3C64XX_GPIOREG(0x230) - -#define S3C64XX_EINT12MASK S3C64XX_GPIOREG(0x240) -#define S3C64XX_EINT34MASK S3C64XX_GPIOREG(0x244) -#define S3C64XX_EINT56MASK S3C64XX_GPIOREG(0x248) -#define S3C64XX_EINT78MASK S3C64XX_GPIOREG(0x24C) -#define S3C64XX_EINT9MASK S3C64XX_GPIOREG(0x250) - -#define S3C64XX_EINT12PEND S3C64XX_GPIOREG(0x260) -#define S3C64XX_EINT34PEND S3C64XX_GPIOREG(0x264) -#define S3C64XX_EINT56PEND S3C64XX_GPIOREG(0x268) -#define S3C64XX_EINT78PEND S3C64XX_GPIOREG(0x26C) -#define S3C64XX_EINT9PEND S3C64XX_GPIOREG(0x270) - -#define S3C64XX_PRIORITY S3C64XX_GPIOREG(0x280) -#define S3C64XX_PRIORITY_ARB(x) (1 << (x)) - -#define S3C64XX_SERVICE S3C64XX_GPIOREG(0x284) -#define S3C64XX_SERVICEPEND S3C64XX_GPIOREG(0x288) - -#define S3C64XX_EINT0CON0 S3C64XX_GPIOREG(0x900) -#define S3C64XX_EINT0CON1 S3C64XX_GPIOREG(0x904) -#define S3C64XX_EINT0FLTCON0 S3C64XX_GPIOREG(0x910) -#define S3C64XX_EINT0FLTCON1 S3C64XX_GPIOREG(0x914) -#define S3C64XX_EINT0FLTCON2 S3C64XX_GPIOREG(0x918) -#define S3C64XX_EINT0FLTCON3 S3C64XX_GPIOREG(0x91C) - -#define S3C64XX_EINT0MASK S3C64XX_GPIOREG(0x920) -#define S3C64XX_EINT0PEND S3C64XX_GPIOREG(0x924) - -/* GPIO sleep configuration */ - -#define S3C64XX_SPCONSLP S3C64XX_GPIOREG(0x880) - -#define S3C64XX_SPCONSLP_TDO_PULLDOWN (1 << 14) -#define S3C64XX_SPCONSLP_CKE1INIT (1 << 5) - -#define S3C64XX_SPCONSLP_RSTOUT_MASK (0x3 << 12) -#define S3C64XX_SPCONSLP_RSTOUT_OUT0 (0x0 << 12) -#define S3C64XX_SPCONSLP_RSTOUT_OUT1 (0x1 << 12) -#define S3C64XX_SPCONSLP_RSTOUT_HIZ (0x2 << 12) - -#define S3C64XX_SPCONSLP_KPCOL_MASK (0x3 << 0) -#define S3C64XX_SPCONSLP_KPCOL_OUT0 (0x0 << 0) -#define S3C64XX_SPCONSLP_KPCOL_OUT1 (0x1 << 0) -#define S3C64XX_SPCONSLP_KPCOL_INP (0x2 << 0) - - -#define S3C64XX_SLPEN S3C64XX_GPIOREG(0x930) - -#define S3C64XX_SLPEN_USE_xSLP (1 << 0) -#define S3C64XX_SLPEN_CFG_BYSLPEN (1 << 1) - -#endif /* __ASM_PLAT_S3C64XX_REGS_GPIO_H */ - diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-modem.h b/arch/arm/plat-s3c64xx/include/plat/regs-modem.h deleted file mode 100644 index 49f7759dedfa..000000000000 --- a/arch/arm/plat-s3c64xx/include/plat/regs-modem.h +++ /dev/null @@ -1,31 +0,0 @@ -/* arch/arm/plat-s3c64xx/include/plat/regs-modem.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C64XX - modem block registers - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __PLAT_S3C64XX_REGS_MODEM_H -#define __PLAT_S3C64XX_REGS_MODEM_H __FILE__ - -#define S3C64XX_MODEMREG(x) (S3C64XX_VA_MODEM + (x)) - -#define S3C64XX_MODEM_INT2AP S3C64XX_MODEMREG(0x0) -#define S3C64XX_MODEM_INT2MODEM S3C64XX_MODEMREG(0x4) -#define S3C64XX_MODEM_MIFCON S3C64XX_MODEMREG(0x8) -#define S3C64XX_MODEM_MIFPCON S3C64XX_MODEMREG(0xC) -#define S3C64XX_MODEM_INTCLR S3C64XX_MODEMREG(0x10) -#define S3C64XX_MODEM_DMA_TXADDR S3C64XX_MODEMREG(0x14) -#define S3C64XX_MODEM_DMA_RXADDR S3C64XX_MODEMREG(0x18) - -#define MIFPCON_INT2M_LEVEL (1 << 4) -#define MIFPCON_LCD_BYPASS (1 << 3) - -#endif /* __PLAT_S3C64XX_REGS_MODEM_H */ diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-sys.h b/arch/arm/plat-s3c64xx/include/plat/regs-sys.h deleted file mode 100644 index 69b78d9f83b8..000000000000 --- a/arch/arm/plat-s3c64xx/include/plat/regs-sys.h +++ /dev/null @@ -1,28 +0,0 @@ -/* arch/arm/plat-s3c64xx/include/plat/regs-sys.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C64XX system register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __PLAT_REGS_SYS_H -#define __PLAT_REGS_SYS_H __FILE__ - -#define S3C_SYSREG(x) (S3C_VA_SYS + (x)) - -#define S3C64XX_AHB_CON0 S3C_SYSREG(0x100) -#define S3C64XX_AHB_CON1 S3C_SYSREG(0x104) -#define S3C64XX_AHB_CON2 S3C_SYSREG(0x108) - -#define S3C64XX_OTHERS S3C_SYSREG(0x900) - -#define S3C64XX_OTHERS_USBMASK (1 << 16) - -#endif /* _PLAT_REGS_SYS_H */ diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-syscon-power.h b/arch/arm/plat-s3c64xx/include/plat/regs-syscon-power.h deleted file mode 100644 index 270d96ac9705..000000000000 --- a/arch/arm/plat-s3c64xx/include/plat/regs-syscon-power.h +++ /dev/null @@ -1,116 +0,0 @@ -/* arch/arm/plat-s3c64xx/include/plat/regs-syscon-power.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C64XX - syscon power and sleep control registers - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __PLAT_S3C64XX_REGS_SYSCON_POWER_H -#define __PLAT_S3C64XX_REGS_SYSCON_POWER_H __FILE__ - -#define S3C64XX_PWR_CFG S3C_SYSREG(0x804) - -#define S3C64XX_PWRCFG_OSC_OTG_DISABLE (1 << 17) -#define S3C64XX_PWRCFG_MMC2_DISABLE (1 << 16) -#define S3C64XX_PWRCFG_MMC1_DISABLE (1 << 15) -#define S3C64XX_PWRCFG_MMC0_DISABLE (1 << 14) -#define S3C64XX_PWRCFG_HSI_DISABLE (1 << 13) -#define S3C64XX_PWRCFG_TS_DISABLE (1 << 12) -#define S3C64XX_PWRCFG_RTC_TICK_DISABLE (1 << 11) -#define S3C64XX_PWRCFG_RTC_ALARM_DISABLE (1 << 10) -#define S3C64XX_PWRCFG_MSM_DISABLE (1 << 9) -#define S3C64XX_PWRCFG_KEY_DISABLE (1 << 8) -#define S3C64XX_PWRCFG_BATF_DISABLE (1 << 7) - -#define S3C64XX_PWRCFG_CFG_WFI_MASK (0x3 << 5) -#define S3C64XX_PWRCFG_CFG_WFI_SHIFT (5) -#define S3C64XX_PWRCFG_CFG_WFI_IGNORE (0x0 << 5) -#define S3C64XX_PWRCFG_CFG_WFI_IDLE (0x1 << 5) -#define S3C64XX_PWRCFG_CFG_WFI_STOP (0x2 << 5) -#define S3C64XX_PWRCFG_CFG_WFI_SLEEP (0x3 << 5) - -#define S3C64XX_PWRCFG_CFG_BATFLT_MASK (0x3 << 3) -#define S3C64XX_PWRCFG_CFG_BATFLT_SHIFT (3) -#define S3C64XX_PWRCFG_CFG_BATFLT_IGNORE (0x0 << 3) -#define S3C64XX_PWRCFG_CFG_BATFLT_IRQ (0x1 << 3) -#define S3C64XX_PWRCFG_CFG_BATFLT_SLEEP (0x3 << 3) - -#define S3C64XX_PWRCFG_CFG_BAT_WAKE (1 << 2) -#define S3C64XX_PWRCFG_OSC27_EN (1 << 0) - -#define S3C64XX_EINT_MASK S3C_SYSREG(0x808) - -#define S3C64XX_NORMAL_CFG S3C_SYSREG(0x810) - -#define S3C64XX_NORMALCFG_IROM_ON (1 << 30) -#define S3C64XX_NORMALCFG_DOMAIN_ETM_ON (1 << 16) -#define S3C64XX_NORMALCFG_DOMAIN_S_ON (1 << 15) -#define S3C64XX_NORMALCFG_DOMAIN_F_ON (1 << 14) -#define S3C64XX_NORMALCFG_DOMAIN_P_ON (1 << 13) -#define S3C64XX_NORMALCFG_DOMAIN_I_ON (1 << 12) -#define S3C64XX_NORMALCFG_DOMAIN_G_ON (1 << 10) -#define S3C64XX_NORMALCFG_DOMAIN_V_ON (1 << 9) - -#define S3C64XX_STOP_CFG S3C_SYSREG(0x814) - -#define S3C64XX_STOPCFG_MEMORY_ARM_ON (1 << 29) -#define S3C64XX_STOPCFG_TOP_MEMORY_ON (1 << 20) -#define S3C64XX_STOPCFG_ARM_LOGIC_ON (1 << 17) -#define S3C64XX_STOPCFG_TOP_LOGIC_ON (1 << 8) -#define S3C64XX_STOPCFG_OSC_EN (1 << 0) - -#define S3C64XX_SLEEP_CFG S3C_SYSREG(0x818) - -#define S3C64XX_SLEEPCFG_OSC_EN (1 << 0) - -#define S3C64XX_STOP_MEM_CFG S3C_SYSREG(0x81c) - -#define S3C64XX_STOPMEMCFG_MODEMIF_RETAIN (1 << 6) -#define S3C64XX_STOPMEMCFG_HOSTIF_RETAIN (1 << 5) -#define S3C64XX_STOPMEMCFG_OTG_RETAIN (1 << 4) -#define S3C64XX_STOPMEMCFG_HSMCC_RETAIN (1 << 3) -#define S3C64XX_STOPMEMCFG_IROM_RETAIN (1 << 2) -#define S3C64XX_STOPMEMCFG_IRDA_RETAIN (1 << 1) -#define S3C64XX_STOPMEMCFG_NFCON_RETAIN (1 << 0) - -#define S3C64XX_OSC_STABLE S3C_SYSREG(0x824) -#define S3C64XX_PWR_STABLE S3C_SYSREG(0x828) - -#define S3C64XX_WAKEUP_STAT S3C_SYSREG(0x908) - -#define S3C64XX_WAKEUPSTAT_MMC2 (1 << 11) -#define S3C64XX_WAKEUPSTAT_MMC1 (1 << 10) -#define S3C64XX_WAKEUPSTAT_MMC0 (1 << 9) -#define S3C64XX_WAKEUPSTAT_HSI (1 << 8) -#define S3C64XX_WAKEUPSTAT_BATFLT (1 << 6) -#define S3C64XX_WAKEUPSTAT_MSM (1 << 5) -#define S3C64XX_WAKEUPSTAT_KEY (1 << 4) -#define S3C64XX_WAKEUPSTAT_TS (1 << 3) -#define S3C64XX_WAKEUPSTAT_RTC_TICK (1 << 2) -#define S3C64XX_WAKEUPSTAT_RTC_ALARM (1 << 1) -#define S3C64XX_WAKEUPSTAT_EINT (1 << 0) - -#define S3C64XX_BLK_PWR_STAT S3C_SYSREG(0x90c) - -#define S3C64XX_BLKPWRSTAT_G (1 << 7) -#define S3C64XX_BLKPWRSTAT_ETM (1 << 6) -#define S3C64XX_BLKPWRSTAT_S (1 << 5) -#define S3C64XX_BLKPWRSTAT_F (1 << 4) -#define S3C64XX_BLKPWRSTAT_P (1 << 3) -#define S3C64XX_BLKPWRSTAT_I (1 << 2) -#define S3C64XX_BLKPWRSTAT_V (1 << 1) -#define S3C64XX_BLKPWRSTAT_TOP (1 << 0) - -#define S3C64XX_INFORM0 S3C_SYSREG(0xA00) -#define S3C64XX_INFORM1 S3C_SYSREG(0xA04) -#define S3C64XX_INFORM2 S3C_SYSREG(0xA08) -#define S3C64XX_INFORM3 S3C_SYSREG(0xA0C) - -#endif /* __PLAT_S3C64XX_REGS_SYSCON_POWER_H */ diff --git a/arch/arm/plat-s3c64xx/include/plat/s3c6400.h b/arch/arm/plat-s3c64xx/include/plat/s3c6400.h deleted file mode 100644 index 11f2e1e119b0..000000000000 --- a/arch/arm/plat-s3c64xx/include/plat/s3c6400.h +++ /dev/null @@ -1,36 +0,0 @@ -/* arch/arm/plat-s3c64xx/include/plat/s3c6400.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * Header file for s3c6400 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* Common init code for S3C6400 related SoCs */ - -extern void s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); -extern void s3c6400_register_clocks(unsigned armclk_divlimit); -extern void s3c6400_setup_clocks(void); - -#ifdef CONFIG_CPU_S3C6400 - -extern int s3c6400_init(void); -extern void s3c6400_init_irq(void); -extern void s3c6400_map_io(void); -extern void s3c6400_init_clocks(int xtal); - -#define s3c6400_init_uarts s3c6400_common_init_uarts - -#else -#define s3c6400_init_clocks NULL -#define s3c6400_init_uarts NULL -#define s3c6400_map_io NULL -#define s3c6400_init NULL -#endif - diff --git a/arch/arm/plat-s3c64xx/include/plat/s3c6410.h b/arch/arm/plat-s3c64xx/include/plat/s3c6410.h deleted file mode 100644 index 50dcdd6f6800..000000000000 --- a/arch/arm/plat-s3c64xx/include/plat/s3c6410.h +++ /dev/null @@ -1,29 +0,0 @@ -/* arch/arm/plat-s3c64xx/include/plat/s3c6410.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * Header file for s3c6410 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifdef CONFIG_CPU_S3C6410 - -extern int s3c6410_init(void); -extern void s3c6410_init_irq(void); -extern void s3c6410_map_io(void); -extern void s3c6410_init_clocks(int xtal); - -#define s3c6410_init_uarts s3c6400_common_init_uarts - -#else -#define s3c6410_init_clocks NULL -#define s3c6410_init_uarts NULL -#define s3c6410_map_io NULL -#define s3c6410_init NULL -#endif |