diff options
Diffstat (limited to 'arch/arm64/boot/dts')
20 files changed, 65 insertions, 32 deletions
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts index 2beef9e6cb88..aa0b3844ad63 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts @@ -126,9 +126,9 @@ ®_dcdc1 { regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-3v"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; }; ®_dcdc2 { diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts index 338e786155b1..2ef779b02757 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts @@ -120,10 +120,14 @@ /* DCDC3 is polyphased with DCDC2 */ +/* + * The board uses DDR3L DRAM chips. 1.36V is the closest to the nominal + * 1.35V that the PMIC can drive. + */ ®_dcdc5 { regulator-always-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; + regulator-min-microvolt = <1360000>; + regulator-max-microvolt = <1360000>; regulator-name = "vcc-ddr3"; }; diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi index 125f4deb52fe..b664e7af74eb 100644 --- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi +++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi @@ -107,7 +107,7 @@ clock-names = "uartclk", "apb_pclk"; }; - spi0: ssp@e1020000 { + spi0: spi@e1020000 { status = "disabled"; compatible = "arm,pl022", "arm,primecell"; reg = <0 0xe1020000 0 0x1000>; @@ -117,7 +117,7 @@ clock-names = "apb_pclk"; }; - spi1: ssp@e1030000 { + spi1: spi@e1030000 { status = "disabled"; compatible = "arm,pl022", "arm,primecell"; reg = <0 0xe1030000 0 0x1000>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts index 4b17a76959b2..c83c028e95af 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts @@ -178,7 +178,7 @@ pinctrl-names = "default"; }; -&pinctrl_aobus { +&gpio_ao { gpio-line-names = "UART TX", "UART RX", "Power Control", "Power Key In", "VCCK En", "CON1 Header Pin31", "I2S Header Pin6", "IR In", "I2S Header Pin7", @@ -186,7 +186,7 @@ "I2S Header Pin5", "HDMI CEC", "SYS LED"; }; -&pinctrl_periphs { +&gpio { gpio-line-names = /* Bank GPIOZ */ "Eth MDIO", "Eth MDC", "Eth RGMII RX Clk", "Eth RX DV", "Eth RX D0", "Eth RX D1", "Eth RX D2", diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts index c3c65b06ba76..4ea23df81f21 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts @@ -189,7 +189,7 @@ pinctrl-names = "default"; }; -&pinctrl_aobus { +&gpio_ao { gpio-line-names = "UART TX", "UART RX", "VCCK En", "TF 3V3/1V8 En", "USB HUB nRESET", "USB OTG Power En", "J7 Header Pin2", "IR In", "J7 Header Pin4", @@ -197,7 +197,7 @@ "HDMI CEC", "SYS LED"; }; -&pinctrl_periphs { +&gpio { gpio-line-names = /* Bank GPIOZ */ "Eth MDIO", "Eth MDC", "Eth RGMII RX Clk", "Eth RX DV", "Eth RX D0", "Eth RX D1", "Eth RX D2", diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index af834cdbba79..250b5c11c0e2 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -413,7 +413,7 @@ }; }; - spi_pins: spi { + spi_pins: spi-pins { mux { groups = "spi_miso", "spi_mosi", diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts index edc512ad0bac..fb5db5f33e8c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts @@ -112,7 +112,7 @@ linux,rc-map-name = "rc-geekbox"; }; -&pinctrl_aobus { +&gpio_ao { gpio-line-names = "UART TX", "UART RX", "Power Key In", @@ -125,7 +125,7 @@ "SYS LED"; }; -&pinctrl_periphs { +&gpio { gpio-line-names = /* Bank GPIOZ */ "", "", "", "", "", "", "", "", "", "", "", "", "", "", diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts index d71cbf596d1f..e2c71753e327 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts @@ -14,7 +14,7 @@ / { compatible = "libretech,cc", "amlogic,s905x", "amlogic,meson-gxl"; - model = "Libre Technology CC"; + model = "Libre Computer Board AML-S905X-CC"; aliases { serial0 = &uart_AO; @@ -139,7 +139,7 @@ }; }; -&pinctrl_aobus { +&gpio_ao { gpio-line-names = "UART TX", "UART RX", "Blue LED", @@ -152,7 +152,7 @@ "7J1 Header Pin13"; }; -&pinctrl_periphs { +&gpio { gpio-line-names = /* Bank GPIOZ */ "", "", "", "", "", "", "", "", "", "", "", "", "", "", diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index fb8d76a17bc5..3c3057944960 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -310,7 +310,7 @@ }; }; - spi_pins: spi { + spi_pins: spi-pins { mux { groups = "spi_miso", "spi_mosi", diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi index 15214d05fec1..8c20d4a0cb4e 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi @@ -42,13 +42,14 @@ pinmux: pinmux@0014029c { compatible = "pinctrl-single"; - reg = <0x0014029c 0x250>; + reg = <0x0014029c 0x26c>; #address-cells = <1>; #size-cells = <1>; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0xf>; pinctrl-single,gpio-range = < - &range 0 154 MODE_GPIO + &range 0 91 MODE_GPIO + &range 95 60 MODE_GPIO >; range: gpio-range { #pinctrl-single,gpio-range-cells = <3>; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi index 2b76293b51c8..3d2921ef2935 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi @@ -444,8 +444,7 @@ <&pinmux 108 16 27>, <&pinmux 135 77 6>, <&pinmux 141 67 4>, - <&pinmux 145 149 6>, - <&pinmux 151 91 4>; + <&pinmux 145 149 6>; }; i2c1: i2c@000e0000 { diff --git a/arch/arm64/boot/dts/lg/lg1312.dtsi b/arch/arm64/boot/dts/lg/lg1312.dtsi index 860c8fb10795..4bde7b6f2b11 100644 --- a/arch/arm64/boot/dts/lg/lg1312.dtsi +++ b/arch/arm64/boot/dts/lg/lg1312.dtsi @@ -168,14 +168,14 @@ clock-names = "apb_pclk"; status="disabled"; }; - spi0: ssp@fe800000 { + spi0: spi@fe800000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x0 0xfe800000 0x1000>; interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_bus>; clock-names = "apb_pclk"; }; - spi1: ssp@fe900000 { + spi1: spi@fe900000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x0 0xfe900000 0x1000>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/lg/lg1313.dtsi b/arch/arm64/boot/dts/lg/lg1313.dtsi index 1887af654a7d..16ced1ff1ad3 100644 --- a/arch/arm64/boot/dts/lg/lg1313.dtsi +++ b/arch/arm64/boot/dts/lg/lg1313.dtsi @@ -168,14 +168,14 @@ clock-names = "apb_pclk"; status="disabled"; }; - spi0: ssp@fe800000 { + spi0: spi@fe800000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x0 0xfe800000 0x1000>; interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_bus>; clock-names = "apb_pclk"; }; - spi1: ssp@fe900000 { + spi1: spi@fe900000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x0 0xfe900000 0x1000>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index 8c0cf7efac65..b554cdaf5e53 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -134,7 +134,7 @@ uart0: serial@12000 { compatible = "marvell,armada-3700-uart"; - reg = <0x12000 0x400>; + reg = <0x12000 0x200>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi index d10d4430537a..be91873c0878 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi @@ -282,6 +282,7 @@ status = "okay"; bus-width = <8>; non-removable; + vqmmc-supply = <&vdd_1v8>; }; clocks { @@ -307,7 +308,8 @@ regulator-max-microvolt = <1320000>; enable-gpios = <&pmic 6 GPIO_ACTIVE_HIGH>; regulator-ramp-delay = <80>; - regulator-enable-ramp-delay = <1000>; + regulator-enable-ramp-delay = <2000>; + regulator-settling-time-us = <160>; }; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi index d67ef4319f3b..97f31bc4fa1e 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi @@ -1584,7 +1584,7 @@ regulator-name = "VDD_HDMI_5V0"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&exp1 12 GPIO_ACTIVE_LOW>; + gpio = <&exp1 12 GPIO_ACTIVE_HIGH>; enable-active-high; vin-supply = <&vdd_5v0_sys>; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index 9bdf19f2cca7..466199766848 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -1103,7 +1103,7 @@ compatible = "nvidia,tegra210-agic"; #interrupt-cells = <3>; interrupt-controller; - reg = <0x702f9000 0x2000>, + reg = <0x702f9000 0x1000>, <0x702fa000 0x2000>; interrupts = <GIC_SPI 102 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; clocks = <&tegra_car TEGRA210_CLK_APE>; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts index e720f40bbd5d..3f8f528099a8 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts @@ -77,6 +77,7 @@ pinctrl-0 = <&usb30_host_drv>; regulator-name = "vcc_host_5v"; regulator-always-on; + regulator-boot-on; vin-supply = <&vcc_sys>; }; @@ -87,6 +88,7 @@ pinctrl-0 = <&usb20_host_drv>; regulator-name = "vcc_host1_5v"; regulator-always-on; + regulator-boot-on; vin-supply = <&vcc_sys>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index f6b4b8f0260f..c34daae3c37c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -685,6 +685,7 @@ <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; + max-frequency = <150000000>; status = "disabled"; }; @@ -696,6 +697,7 @@ <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; + max-frequency = <150000000>; status = "disabled"; }; @@ -707,6 +709,7 @@ <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; + max-frequency = <150000000>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi index ce592a4c0c4c..075659847791 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi @@ -113,6 +113,19 @@ vin-supply = <&vcc_1v8>; }; + vcc3v0_sd: vcc3v0-sd { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_pwr_h>; + regulator-always-on; + regulator-max-microvolt = <3000000>; + regulator-min-microvolt = <3000000>; + regulator-name = "vcc3v0_sd"; + vin-supply = <&vcc3v3_sys>; + }; + vcc3v3_sys: vcc3v3-sys { compatible = "regulator-fixed"; regulator-name = "vcc3v3_sys"; @@ -136,7 +149,7 @@ vcc5v0_host: vcc5v0-host-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>; + gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vcc5v0_host_en>; regulator-name = "vcc5v0_host"; @@ -315,7 +328,7 @@ regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <3000000>; @@ -490,6 +503,13 @@ }; }; + sd { + sdmmc0_pwr_h: sdmmc0-pwr-h { + rockchip,pins = + <RK_GPIO0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + usb2 { vcc5v0_host_en: vcc5v0-host-en { rockchip,pins = @@ -537,6 +557,7 @@ }; &sdmmc { + broken-cd; bus-width = <4>; cap-mmc-highspeed; cap-sd-highspeed; @@ -545,6 +566,7 @@ max-frequency = <150000000>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; + vmmc-supply = <&vcc3v0_sd>; vqmmc-supply = <&vcc_sdio>; status = "okay"; }; |