diff options
Diffstat (limited to 'arch/blackfin/kernel/bfin_dma_5xx.c')
| -rw-r--r-- | arch/blackfin/kernel/bfin_dma_5xx.c | 936 |
1 files changed, 236 insertions, 700 deletions
diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c index 339293d677cc..07e02c0d1c07 100644 --- a/arch/blackfin/kernel/bfin_dma_5xx.c +++ b/arch/blackfin/kernel/bfin_dma_5xx.c @@ -1,63 +1,27 @@ /* - * File: arch/blackfin/kernel/bfin_dma_5xx.c - * Based on: - * Author: + * bfin_dma_5xx.c - Blackfin DMA implementation * - * Created: - * Description: This file contains the simple DMA Implementation for Blackfin - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Copyright 2004-2008 Analog Devices Inc. + * Licensed under the GPL-2 or later. */ #include <linux/errno.h> -#include <linux/module.h> -#include <linux/sched.h> #include <linux/interrupt.h> #include <linux/kernel.h> +#include <linux/module.h> #include <linux/param.h> +#include <linux/proc_fs.h> +#include <linux/sched.h> +#include <linux/seq_file.h> +#include <linux/spinlock.h> #include <asm/blackfin.h> -#include <asm/dma.h> #include <asm/cacheflush.h> +#include <asm/dma.h> +#include <asm/uaccess.h> -/* Remove unused code not exported by symbol or internally called */ -#define REMOVE_DEAD_CODE - -/************************************************************************** - * Global Variables -***************************************************************************/ - -static struct dma_channel dma_ch[MAX_BLACKFIN_DMA_CHANNEL]; - -/*------------------------------------------------------------------------------ - * Set the Buffer Clear bit in the Configuration register of specific DMA - * channel. This will stop the descriptor based DMA operation. - *-----------------------------------------------------------------------------*/ -static void clear_dma_buffer(unsigned int channel) -{ - dma_ch[channel].regs->cfg |= RESTART; - SSYNC(); - dma_ch[channel].regs->cfg &= ~RESTART; - SSYNC(); -} +struct dma_channel dma_ch[MAX_DMA_CHANNELS]; +EXPORT_SYMBOL(dma_ch); static int __init blackfin_dma_init(void) { @@ -65,32 +29,67 @@ static int __init blackfin_dma_init(void) printk(KERN_INFO "Blackfin DMA Controller\n"); - for (i = 0; i < MAX_BLACKFIN_DMA_CHANNEL; i++) { + for (i = 0; i < MAX_DMA_CHANNELS; i++) { dma_ch[i].chan_status = DMA_CHANNEL_FREE; dma_ch[i].regs = dma_io_base_addr[i]; mutex_init(&(dma_ch[i].dmalock)); } /* Mark MEMDMA Channel 0 as requested since we're using it internally */ - dma_ch[CH_MEM_STREAM0_DEST].chan_status = DMA_CHANNEL_REQUESTED; - dma_ch[CH_MEM_STREAM0_SRC].chan_status = DMA_CHANNEL_REQUESTED; + request_dma(CH_MEM_STREAM0_DEST, "Blackfin dma_memcpy"); + request_dma(CH_MEM_STREAM0_SRC, "Blackfin dma_memcpy"); #if defined(CONFIG_DEB_DMA_URGENT) bfin_write_EBIU_DDRQUE(bfin_read_EBIU_DDRQUE() | DEB1_URGENT | DEB2_URGENT | DEB3_URGENT); #endif + return 0; } - arch_initcall(blackfin_dma_init); -/*------------------------------------------------------------------------------ - * Request the specific DMA channel from the system. - *-----------------------------------------------------------------------------*/ -int request_dma(unsigned int channel, char *device_id) +#ifdef CONFIG_PROC_FS +static int proc_dma_show(struct seq_file *m, void *v) { + int i; + + for (i = 0; i < MAX_DMA_CHANNELS; ++i) + if (dma_ch[i].chan_status != DMA_CHANNEL_FREE) + seq_printf(m, "%2d: %s\n", i, dma_ch[i].device_id); + + return 0; +} +static int proc_dma_open(struct inode *inode, struct file *file) +{ + return single_open(file, proc_dma_show, NULL); +} + +static const struct file_operations proc_dma_operations = { + .open = proc_dma_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int __init proc_dma_init(void) +{ + return proc_create("dma", 0, NULL, &proc_dma_operations) != NULL; +} +late_initcall(proc_dma_init); +#endif + +/** + * request_dma - request a DMA channel + * + * Request the specific DMA channel from the system if it's available. + */ +int request_dma(unsigned int channel, const char *device_id) +{ pr_debug("request_dma() : BEGIN \n"); + if (device_id == NULL) + printk(KERN_WARNING "request_dma(%u): no device_id given\n", channel); + #if defined(CONFIG_BF561) && ANOMALY_05000182 if (channel >= CH_IMEM_STREAM0_DEST && channel <= CH_IMEM_STREAM1_DEST) { if (get_cclk() > 500000000) { @@ -129,60 +128,63 @@ int request_dma(unsigned int channel, char *device_id) #endif dma_ch[channel].device_id = device_id; - dma_ch[channel].irq_callback = NULL; + dma_ch[channel].irq = 0; /* This is to be enabled by putting a restriction - * you have to request DMA, before doing any operations on * descriptor/channel */ pr_debug("request_dma() : END \n"); - return channel; + return 0; } EXPORT_SYMBOL(request_dma); -int set_dma_callback(unsigned int channel, dma_interrupt_t callback, void *data) +int set_dma_callback(unsigned int channel, irq_handler_t callback, void *data) { - int ret_irq = 0; - BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE - && channel < MAX_BLACKFIN_DMA_CHANNEL)); + && channel < MAX_DMA_CHANNELS)); if (callback != NULL) { - int ret_val; - ret_irq = channel2irq(channel); + int ret; + unsigned int irq = channel2irq(channel); - dma_ch[channel].data = data; + ret = request_irq(irq, callback, IRQF_DISABLED, + dma_ch[channel].device_id, data); + if (ret) + return ret; - ret_val = - request_irq(ret_irq, (void *)callback, IRQF_DISABLED, - dma_ch[channel].device_id, data); - if (ret_val) { - printk(KERN_NOTICE - "Request irq in DMA engine failed.\n"); - return -EPERM; - } - dma_ch[channel].irq_callback = callback; + dma_ch[channel].irq = irq; + dma_ch[channel].data = data; } return 0; } EXPORT_SYMBOL(set_dma_callback); -void free_dma(unsigned int channel) +/** + * clear_dma_buffer - clear DMA fifos for specified channel + * + * Set the Buffer Clear bit in the Configuration register of specific DMA + * channel. This will stop the descriptor based DMA operation. + */ +static void clear_dma_buffer(unsigned int channel) { - int ret_irq; + dma_ch[channel].regs->cfg |= RESTART; + SSYNC(); + dma_ch[channel].regs->cfg &= ~RESTART; +} +void free_dma(unsigned int channel) +{ pr_debug("freedma() : BEGIN \n"); BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE - && channel < MAX_BLACKFIN_DMA_CHANNEL)); + && channel < MAX_DMA_CHANNELS)); /* Halt the DMA */ disable_dma(channel); clear_dma_buffer(channel); - if (dma_ch[channel].irq_callback != NULL) { - ret_irq = channel2irq(channel); - free_irq(ret_irq, dma_ch[channel].data); - } + if (dma_ch[channel].irq) + free_irq(dma_ch[channel].irq, dma_ch[channel].data); /* Clear the DMA Variable in the Channel */ mutex_lock(&(dma_ch[channel].dmalock)); @@ -193,294 +195,15 @@ void free_dma(unsigned int channel) } EXPORT_SYMBOL(free_dma); -void dma_enable_irq(unsigned int channel) -{ - int ret_irq; - - pr_debug("dma_enable_irq() : BEGIN \n"); - BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE - && channel < MAX_BLACKFIN_DMA_CHANNEL)); - - ret_irq = channel2irq(channel); - enable_irq(ret_irq); -} -EXPORT_SYMBOL(dma_enable_irq); - -void dma_disable_irq(unsigned int channel) -{ - int ret_irq; - - pr_debug("dma_disable_irq() : BEGIN \n"); - BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE - && channel < MAX_BLACKFIN_DMA_CHANNEL)); - - ret_irq = channel2irq(channel); - disable_irq(ret_irq); -} -EXPORT_SYMBOL(dma_disable_irq); - -int dma_channel_active(unsigned int channel) -{ - if (dma_ch[channel].chan_status == DMA_CHANNEL_FREE) { - return 0; - } else { - return 1; - } -} -EXPORT_SYMBOL(dma_channel_active); - -/*------------------------------------------------------------------------------ -* stop the specific DMA channel. -*-----------------------------------------------------------------------------*/ -void disable_dma(unsigned int channel) -{ - pr_debug("stop_dma() : BEGIN \n"); - - BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE - && channel < MAX_BLACKFIN_DMA_CHANNEL)); - - dma_ch[channel].regs->cfg &= ~DMAEN; /* Clean the enable bit */ - SSYNC(); - dma_ch[channel].chan_status = DMA_CHANNEL_REQUESTED; - /* Needs to be enabled Later */ - pr_debug("stop_dma() : END \n"); - return; -} -EXPORT_SYMBOL(disable_dma); - -void enable_dma(unsigned int channel) -{ - pr_debug("enable_dma() : BEGIN \n"); - - BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE - && channel < MAX_BLACKFIN_DMA_CHANNEL)); - - dma_ch[channel].chan_status = DMA_CHANNEL_ENABLED; - dma_ch[channel].regs->curr_x_count = 0; - dma_ch[channel].regs->curr_y_count = 0; - - dma_ch[channel].regs->cfg |= DMAEN; /* Set the enable bit */ - SSYNC(); - pr_debug("enable_dma() : END \n"); - return; -} -EXPORT_SYMBOL(enable_dma); - -/*------------------------------------------------------------------------------ -* Set the Start Address register for the specific DMA channel -* This function can be used for register based DMA, -* to setup the start address -* addr: Starting address of the DMA Data to be transferred. -*-----------------------------------------------------------------------------*/ -void set_dma_start_addr(unsigned int channel, unsigned long addr) -{ - pr_debug("set_dma_start_addr() : BEGIN \n"); - - BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE - && channel < MAX_BLACKFIN_DMA_CHANNEL)); - - dma_ch[channel].regs->start_addr = addr; - SSYNC(); - pr_debug("set_dma_start_addr() : END\n"); -} -EXPORT_SYMBOL(set_dma_start_addr); - -void set_dma_next_desc_addr(unsigned int channel, unsigned long addr) -{ - pr_debug("set_dma_next_desc_addr() : BEGIN \n"); - - BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE - && channel < MAX_BLACKFIN_DMA_CHANNEL)); - - dma_ch[channel].regs->next_desc_ptr = addr; - SSYNC(); - pr_debug("set_dma_next_desc_addr() : END\n"); -} -EXPORT_SYMBOL(set_dma_next_desc_addr); - -void set_dma_curr_desc_addr(unsigned int channel, unsigned long addr) -{ - pr_debug("set_dma_curr_desc_addr() : BEGIN \n"); - - BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE - && channel < MAX_BLACKFIN_DMA_CHANNEL)); - - dma_ch[channel].regs->curr_desc_ptr = addr; - SSYNC(); - pr_debug("set_dma_curr_desc_addr() : END\n"); -} -EXPORT_SYMBOL(set_dma_curr_desc_addr); - -void set_dma_x_count(unsigned int channel, unsigned short x_count) -{ - BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE - && channel < MAX_BLACKFIN_DMA_CHANNEL)); - - dma_ch[channel].regs->x_count = x_count; - SSYNC(); -} -EXPORT_SYMBOL(set_dma_x_count); - -void set_dma_y_count(unsigned int channel, unsigned short y_count) -{ - BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE - && channel < MAX_BLACKFIN_DMA_CHANNEL)); - - dma_ch[channel].regs->y_count = y_count; - SSYNC(); -} -EXPORT_SYMBOL(set_dma_y_count); - -void set_dma_x_modify(unsigned int channel, short x_modify) -{ - BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE - && channel < MAX_BLACKFIN_DMA_CHANNEL)); - - dma_ch[channel].regs->x_modify = x_modify; - SSYNC(); -} -EXPORT_SYMBOL(set_dma_x_modify); - -void set_dma_y_modify(unsigned int channel, short y_modify) -{ - BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE - && channel < MAX_BLACKFIN_DMA_CHANNEL)); - - dma_ch[channel].regs->y_modify = y_modify; - SSYNC(); -} -EXPORT_SYMBOL(set_dma_y_modify); - -void set_dma_config(unsigned int channel, unsigned short config) -{ - BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE - && channel < MAX_BLACKFIN_DMA_CHANNEL)); - - dma_ch[channel].regs->cfg = config; - SSYNC(); -} -EXPORT_SYMBOL(set_dma_config); - -unsigned short -set_bfin_dma_config(char direction, char flow_mode, - char intr_mode, char dma_mode, char width, char syncmode) -{ - unsigned short config; - - config = - ((direction << 1) | (width << 2) | (dma_mode << 4) | - (intr_mode << 6) | (flow_mode << 12) | (syncmode << 5)); - return config; -} -EXPORT_SYMBOL(set_bfin_dma_config); - -void set_dma_sg(unsigned int channel, struct dmasg *sg, int nr_sg) -{ - BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE - && channel < MAX_BLACKFIN_DMA_CHANNEL)); - - dma_ch[channel].regs->cfg |= ((nr_sg & 0x0F) << 8); - - dma_ch[channel].regs->next_desc_ptr = (unsigned int)sg; - - SSYNC(); -} -EXPORT_SYMBOL(set_dma_sg); - -void set_dma_curr_addr(unsigned int channel, unsigned long addr) -{ - BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE - && channel < MAX_BLACKFIN_DMA_CHANNEL)); - - dma_ch[channel].regs->curr_addr_ptr = addr; - SSYNC(); -} -EXPORT_SYMBOL(set_dma_curr_addr); - -/*------------------------------------------------------------------------------ - * Get the DMA status of a specific DMA channel from the system. - *-----------------------------------------------------------------------------*/ -unsigned short get_dma_curr_irqstat(unsigned int channel) -{ - BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE - && channel < MAX_BLACKFIN_DMA_CHANNEL)); - - return dma_ch[channel].regs->irq_status; -} -EXPORT_SYMBOL(get_dma_curr_irqstat); - -/*------------------------------------------------------------------------------ - * Clear the DMA_DONE bit in DMA status. Stop the DMA completion interrupt. - *-----------------------------------------------------------------------------*/ -void clear_dma_irqstat(unsigned int channel) -{ - BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE - && channel < MAX_BLACKFIN_DMA_CHANNEL)); - dma_ch[channel].regs->irq_status |= 3; -} -EXPORT_SYMBOL(clear_dma_irqstat); - -/*------------------------------------------------------------------------------ - * Get current DMA xcount of a specific DMA channel from the system. - *-----------------------------------------------------------------------------*/ -unsigned short get_dma_curr_xcount(unsigned int channel) -{ - BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE - && channel < MAX_BLACKFIN_DMA_CHANNEL)); - - return dma_ch[channel].regs->curr_x_count; -} -EXPORT_SYMBOL(get_dma_curr_xcount); - -/*------------------------------------------------------------------------------ - * Get current DMA ycount of a specific DMA channel from the system. - *-----------------------------------------------------------------------------*/ -unsigned short get_dma_curr_ycount(unsigned int channel) -{ - BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE - && channel < MAX_BLACKFIN_DMA_CHANNEL)); - - return dma_ch[channel].regs->curr_y_count; -} -EXPORT_SYMBOL(get_dma_curr_ycount); - -unsigned long get_dma_next_desc_ptr(unsigned int channel) -{ - BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE - && channel < MAX_BLACKFIN_DMA_CHANNEL)); - - return dma_ch[channel].regs->next_desc_ptr; -} -EXPORT_SYMBOL(get_dma_next_desc_ptr); - -unsigned long get_dma_curr_desc_ptr(unsigned int channel) -{ - BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE - && channel < MAX_BLACKFIN_DMA_CHANNEL)); - - return dma_ch[channel].regs->curr_desc_ptr; -} -EXPORT_SYMBOL(get_dma_curr_desc_ptr); - -unsigned long get_dma_curr_addr(unsigned int channel) -{ - BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE - && channel < MAX_BLACKFIN_DMA_CHANNEL)); - - return dma_ch[channel].regs->curr_addr_ptr; -} -EXPORT_SYMBOL(get_dma_curr_addr); - #ifdef CONFIG_PM +# ifndef MAX_DMA_SUSPEND_CHANNELS +# define MAX_DMA_SUSPEND_CHANNELS MAX_DMA_CHANNELS +# endif int blackfin_dma_suspend(void) { int i; -#ifdef CONFIG_BF561 /* IMDMA channels doesn't have a PERIPHERAL_MAP */ - for (i = 0; i <= CH_MEM_STREAM3_SRC; i++) { -#else - for (i = 0; i < MAX_BLACKFIN_DMA_CHANNEL; i++) { -#endif + for (i = 0; i < MAX_DMA_SUSPEND_CHANNELS; ++i) { if (dma_ch[i].chan_status == DMA_CHANNEL_ENABLED) { printk(KERN_ERR "DMA Channel %d failed to suspend\n", i); return -EBUSY; @@ -495,388 +218,201 @@ int blackfin_dma_suspend(void) void blackfin_dma_resume(void) { int i; - -#ifdef CONFIG_BF561 /* IMDMA channels doesn't have a PERIPHERAL_MAP */ - for (i = 0; i <= CH_MEM_STREAM3_SRC; i++) -#else - for (i = 0; i < MAX_BLACKFIN_DMA_CHANNEL; i++) -#endif + for (i = 0; i < MAX_DMA_SUSPEND_CHANNELS; ++i) dma_ch[i].regs->peripheral_map = dma_ch[i].saved_peripheral_map; } #endif -static void *__dma_memcpy(void *dest, const void *src, size_t size) +/** + * blackfin_dma_early_init - minimal DMA init + * + * Setup a few DMA registers so we can safely do DMA transfers early on in + * the kernel booting process. Really this just means using dma_memcpy(). + */ +void __init blackfin_dma_early_init(void) { - int direction; /* 1 - address decrease, 0 - address increase */ - int flag_align; /* 1 - address aligned, 0 - address unaligned */ - int flag_2D; /* 1 - 2D DMA needed, 0 - 1D DMA needed */ - unsigned long flags; - - if (size <= 0) - return NULL; - - local_irq_save(flags); - - if ((unsigned long)src < memory_end) - blackfin_dcache_flush_range((unsigned int)src, - (unsigned int)(src + size)); - - if ((unsigned long)dest < memory_end) - blackfin_dcache_invalidate_range((unsigned int)dest, - (unsigned int)(dest + size)); - - bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); - - if ((unsigned long)src < (unsigned long)dest) - direction = 1; - else - direction = 0; - - if ((((unsigned long)dest % 2) == 0) && (((unsigned long)src % 2) == 0) - && ((size % 2) == 0)) - flag_align = 1; - else - flag_align = 0; - - if (size > 0x10000) /* size > 64K */ - flag_2D = 1; - else - flag_2D = 0; - - /* Setup destination and source start address */ - if (direction) { - if (flag_align) { - bfin_write_MDMA_D0_START_ADDR(dest + size - 2); - bfin_write_MDMA_S0_START_ADDR(src + size - 2); - } else { - bfin_write_MDMA_D0_START_ADDR(dest + size - 1); - bfin_write_MDMA_S0_START_ADDR(src + size - 1); - } - } else { - bfin_write_MDMA_D0_START_ADDR(dest); - bfin_write_MDMA_S0_START_ADDR(src); - } - - /* Setup destination and source xcount */ - if (flag_2D) { - if (flag_align) { - bfin_write_MDMA_D0_X_COUNT(1024 / 2); - bfin_write_MDMA_S0_X_COUNT(1024 / 2); - } else { - bfin_write_MDMA_D0_X_COUNT(1024); - bfin_write_MDMA_S0_X_COUNT(1024); - } - bfin_write_MDMA_D0_Y_COUNT(size >> 10); - bfin_write_MDMA_S0_Y_COUNT(size >> 10); - } else { - if (flag_align) { - bfin_write_MDMA_D0_X_COUNT(size / 2); - bfin_write_MDMA_S0_X_COUNT(size / 2); - } else { - bfin_write_MDMA_D0_X_COUNT(size); - bfin_write_MDMA_S0_X_COUNT(size); - } - } - - /* Setup destination and source xmodify and ymodify */ - if (direction) { - if (flag_align) { - bfin_write_MDMA_D0_X_MODIFY(-2); - bfin_write_MDMA_S0_X_MODIFY(-2); - if (flag_2D) { - bfin_write_MDMA_D0_Y_MODIFY(-2); - bfin_write_MDMA_S0_Y_MODIFY(-2); - } - } else { - bfin_write_MDMA_D0_X_MODIFY(-1); - bfin_write_MDMA_S0_X_MODIFY(-1); - if (flag_2D) { - bfin_write_MDMA_D0_Y_MODIFY(-1); - bfin_write_MDMA_S0_Y_MODIFY(-1); - } - } - } else { - if (flag_align) { - bfin_write_MDMA_D0_X_MODIFY(2); - bfin_write_MDMA_S0_X_MODIFY(2); - if (flag_2D) { - bfin_write_MDMA_D0_Y_MODIFY(2); - bfin_write_MDMA_S0_Y_MODIFY(2); - } - } else { - bfin_write_MDMA_D0_X_MODIFY(1); - bfin_write_MDMA_S0_X_MODIFY(1); - if (flag_2D) { - bfin_write_MDMA_D0_Y_MODIFY(1); - bfin_write_MDMA_S0_Y_MODIFY(1); - } - } - } - - /* Enable source DMA */ - if (flag_2D) { - if (flag_align) { - bfin_write_MDMA_S0_CONFIG(DMAEN | DMA2D | WDSIZE_16); - bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | DMA2D | WDSIZE_16); - } else { - bfin_write_MDMA_S0_CONFIG(DMAEN | DMA2D); - bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | DMA2D); - } - } else { - if (flag_align) { - bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_16); - bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_16); - } else { - bfin_write_MDMA_S0_CONFIG(DMAEN); - bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN); - } - } - - SSYNC(); - - while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)) - ; - - bfin_write_MDMA_D0_IRQ_STATUS(bfin_read_MDMA_D0_IRQ_STATUS() | - (DMA_DONE | DMA_ERR)); - bfin_write_MDMA_S0_CONFIG(0); - bfin_write_MDMA_D0_CONFIG(0); - - local_irq_restore(flags); - - return dest; } -void *dma_memcpy(void *dest, const void *src, size_t size) -{ - size_t bulk; - size_t rest; - void * addr; - - bulk = (size >> 16) << 16; - rest = size - bulk; - if (bulk) - __dma_memcpy(dest, src, bulk); - addr = __dma_memcpy(dest+bulk, src+bulk, rest); - return addr; -} -EXPORT_SYMBOL(dma_memcpy); - -void *safe_dma_memcpy(void *dest, const void *src, size_t size) -{ - void *addr; - addr = dma_memcpy(dest, src, size); - return addr; -} -EXPORT_SYMBOL(safe_dma_memcpy); - -void dma_outsb(unsigned long addr, const void *buf, unsigned short len) +/** + * __dma_memcpy - program the MDMA registers + * + * Actually program MDMA0 and wait for the transfer to finish. Disable IRQs + * while programming registers so that everything is fully configured. Wait + * for DMA to finish with IRQs enabled. If interrupted, the initial DMA_DONE + * check will make sure we don't clobber any existing transfer. + */ +static void __dma_memcpy(u32 daddr, s16 dmod, u32 saddr, s16 smod, size_t cnt, u32 conf) { + static DEFINE_SPINLOCK(mdma_lock); unsigned long flags; - local_irq_save(flags); - - blackfin_dcache_flush_range((unsigned int)buf, - (unsigned int)(buf) + len); + spin_lock_irqsave(&mdma_lock, flags); + + if (bfin_read_MDMA_S0_CONFIG()) + while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)) + continue; + + if (conf & DMA2D) { + /* For larger bit sizes, we've already divided down cnt so it + * is no longer a multiple of 64k. So we have to break down + * the limit here so it is a multiple of the incoming size. + * There is no limitation here in terms of total size other + * than the hardware though as the bits lost in the shift are + * made up by MODIFY (== we can hit the whole address space). + * X: (2^(16 - 0)) * 1 == (2^(16 - 1)) * 2 == (2^(16 - 2)) * 4 + */ + u32 shift = abs(dmod) >> 1; + size_t ycnt = cnt >> (16 - shift); + cnt = 1 << (16 - shift); + bfin_write_MDMA_D0_Y_COUNT(ycnt); + bfin_write_MDMA_S0_Y_COUNT(ycnt); + bfin_write_MDMA_D0_Y_MODIFY(dmod); + bfin_write_MDMA_S0_Y_MODIFY(smod); + } - bfin_write_MDMA_D0_START_ADDR(addr); - bfin_write_MDMA_D0_X_COUNT(len); - bfin_write_MDMA_D0_X_MODIFY(0); + bfin_write_MDMA_D0_START_ADDR(daddr); + bfin_write_MDMA_D0_X_COUNT(cnt); + bfin_write_MDMA_D0_X_MODIFY(dmod); bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); - bfin_write_MDMA_S0_START_ADDR(buf); - bfin_write_MDMA_S0_X_COUNT(len); - bfin_write_MDMA_S0_X_MODIFY(1); + bfin_write_MDMA_S0_START_ADDR(saddr); + bfin_write_MDMA_S0_X_COUNT(cnt); + bfin_write_MDMA_S0_X_MODIFY(smod); bfin_write_MDMA_S0_IRQ_STATUS(DMA_DONE | DMA_ERR); - bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_8); - bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_8); + bfin_write_MDMA_S0_CONFIG(DMAEN | conf); + bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | conf); + + spin_unlock_irqrestore(&mdma_lock, flags); SSYNC(); - while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)); + while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)) + if (bfin_read_MDMA_S0_CONFIG()) + continue; + else + return; bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); bfin_write_MDMA_S0_CONFIG(0); bfin_write_MDMA_D0_CONFIG(0); - local_irq_restore(flags); - } -EXPORT_SYMBOL(dma_outsb); - -void dma_insb(unsigned long addr, void *buf, unsigned short len) +/** + * _dma_memcpy - translate C memcpy settings into MDMA settings + * + * Handle all the high level steps before we touch the MDMA registers. So + * handle direction, tweaking of sizes, and formatting of addresses. + */ +static void *_dma_memcpy(void *pdst, const void *psrc, size_t size) { - unsigned long flags; - - blackfin_dcache_invalidate_range((unsigned int)buf, - (unsigned int)(buf) + len); - - local_irq_save(flags); - bfin_write_MDMA_D0_START_ADDR(buf); - bfin_write_MDMA_D0_X_COUNT(len); - bfin_write_MDMA_D0_X_MODIFY(1); - bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); - - bfin_write_MDMA_S0_START_ADDR(addr); - bfin_write_MDMA_S0_X_COUNT(len); - bfin_write_MDMA_S0_X_MODIFY(0); - bfin_write_MDMA_S0_IRQ_STATUS(DMA_DONE | DMA_ERR); + u32 conf, shift; + s16 mod; + unsigned long dst = (unsigned long)pdst; + unsigned long src = (unsigned long)psrc; - bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_8); - bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_8); + if (size == 0) + return NULL; - SSYNC(); + if (dst % 4 == 0 && src % 4 == 0 && size % 4 == 0) { + conf = WDSIZE_32; + shift = 2; + } else if (dst % 2 == 0 && src % 2 == 0 && size % 2 == 0) { + conf = WDSIZE_16; + shift = 1; + } else { + conf = WDSIZE_8; + shift = 0; + } - while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)); + /* If the two memory regions have a chance of overlapping, make + * sure the memcpy still works as expected. Do this by having the + * copy run backwards instead. + */ + mod = 1 << shift; + if (src < dst) { + mod *= -1; + dst += size + mod; + src += size + mod; + } + size >>= shift; - bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); + if (size > 0x10000) + conf |= DMA2D; - bfin_write_MDMA_S0_CONFIG(0); - bfin_write_MDMA_D0_CONFIG(0); - local_irq_restore(flags); + __dma_memcpy(dst, mod, src, mod, size, conf); + return pdst; } -EXPORT_SYMBOL(dma_insb); -void dma_outsw(unsigned long addr, const void *buf, unsigned short len) +/** + * dma_memcpy - DMA memcpy under mutex lock + * + * Do not check arguments before starting the DMA memcpy. Break the transfer + * up into two pieces. The first transfer is in multiples of 64k and the + * second transfer is the piece smaller than 64k. + */ +void *dma_memcpy(void *pdst, const void *psrc, size_t size) { - unsigned long flags; - - local_irq_save(flags); + unsigned long dst = (unsigned long)pdst; + unsigned long src = (unsigned long)psrc; + size_t bulk, rest; - blackfin_dcache_flush_range((unsigned int)buf, - (unsigned int)(buf) + len * sizeof(short)); + if (bfin_addr_dcachable(src)) + blackfin_dcache_flush_range(src, src + size); - bfin_write_MDMA_D0_START_ADDR(addr); - bfin_write_MDMA_D0_X_COUNT(len); - bfin_write_MDMA_D0_X_MODIFY(0); - bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); - - bfin_write_MDMA_S0_START_ADDR(buf); - bfin_write_MDMA_S0_X_COUNT(len); - bfin_write_MDMA_S0_X_MODIFY(2); - bfin_write_MDMA_S0_IRQ_STATUS(DMA_DONE | DMA_ERR); - - bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_16); - bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_16); - - SSYNC(); - - while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)); - - bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); - - bfin_write_MDMA_S0_CONFIG(0); - bfin_write_MDMA_D0_CONFIG(0); - local_irq_restore(flags); + if (bfin_addr_dcachable(dst)) + blackfin_dcache_invalidate_range(dst, dst + size); + bulk = size & ~0xffff; + rest = size - bulk; + if (bulk) + _dma_memcpy(pdst, psrc, bulk); + _dma_memcpy(pdst + bulk, psrc + bulk, rest); + return pdst; } -EXPORT_SYMBOL(dma_outsw); +EXPORT_SYMBOL(dma_memcpy); -void dma_insw(unsigned long addr, void *buf, unsigned short len) +/** + * safe_dma_memcpy - DMA memcpy w/argument checking + * + * Verify arguments are safe before heading to dma_memcpy(). + */ +void *safe_dma_memcpy(void *dst, const void *src, size_t size) { - unsigned long flags; - - blackfin_dcache_invalidate_range((unsigned int)buf, - (unsigned int)(buf) + len * sizeof(short)); - - local_irq_save(flags); - - bfin_write_MDMA_D0_START_ADDR(buf); - bfin_write_MDMA_D0_X_COUNT(len); - bfin_write_MDMA_D0_X_MODIFY(2); - bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); - - bfin_write_MDMA_S0_START_ADDR(addr); - bfin_write_MDMA_S0_X_COUNT(len); - bfin_write_MDMA_S0_X_MODIFY(0); - bfin_write_MDMA_S0_IRQ_STATUS(DMA_DONE | DMA_ERR); - - bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_16); - bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_16); - - SSYNC(); - - while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)); - - bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); - - bfin_write_MDMA_S0_CONFIG(0); - bfin_write_MDMA_D0_CONFIG(0); - local_irq_restore(flags); - + if (!access_ok(VERIFY_WRITE, dst, size)) + return NULL; + if (!access_ok(VERIFY_READ, src, size)) + return NULL; + return dma_memcpy(dst, src, size); } -EXPORT_SYMBOL(dma_insw); +EXPORT_SYMBOL(safe_dma_memcpy); -void dma_outsl(unsigned long addr, const void *buf, unsigned short len) +static void _dma_out(unsigned long addr, unsigned long buf, unsigned short len, + u16 size, u16 dma_size) { - unsigned long flags; - - local_irq_save(flags); - - blackfin_dcache_flush_range((unsigned int)buf, - (unsigned int)(buf) + len * sizeof(long)); - - bfin_write_MDMA_D0_START_ADDR(addr); - bfin_write_MDMA_D0_X_COUNT(len); - bfin_write_MDMA_D0_X_MODIFY(0); - bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); - - bfin_write_MDMA_S0_START_ADDR(buf); - bfin_write_MDMA_S0_X_COUNT(len); - bfin_write_MDMA_S0_X_MODIFY(4); - bfin_write_MDMA_S0_IRQ_STATUS(DMA_DONE | DMA_ERR); - - bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_32); - bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_32); - - SSYNC(); - - while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)); - - bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); - - bfin_write_MDMA_S0_CONFIG(0); - bfin_write_MDMA_D0_CONFIG(0); - local_irq_restore(flags); - + blackfin_dcache_flush_range(buf, buf + len * size); + __dma_memcpy(addr, 0, buf, size, len, dma_size); } -EXPORT_SYMBOL(dma_outsl); -void dma_insl(unsigned long addr, void *buf, unsigned short len) +static void _dma_in(unsigned long addr, unsigned long buf, unsigned short len, + u16 size, u16 dma_size) { - unsigned long flags; - - blackfin_dcache_invalidate_range((unsigned int)buf, - (unsigned int)(buf) + len * sizeof(long)); - - local_irq_save(flags); - - bfin_write_MDMA_D0_START_ADDR(buf); - bfin_write_MDMA_D0_X_COUNT(len); - bfin_write_MDMA_D0_X_MODIFY(4); - bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); - - bfin_write_MDMA_S0_START_ADDR(addr); - bfin_write_MDMA_S0_X_COUNT(len); - bfin_write_MDMA_S0_X_MODIFY(0); - bfin_write_MDMA_S0_IRQ_STATUS(DMA_DONE | DMA_ERR); - - bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_32); - bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_32); - - SSYNC(); - - while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)); - - bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); - - bfin_write_MDMA_S0_CONFIG(0); - bfin_write_MDMA_D0_CONFIG(0); - local_irq_restore(flags); - + blackfin_dcache_invalidate_range(buf, buf + len * size); + __dma_memcpy(buf, size, addr, 0, len, dma_size); } -EXPORT_SYMBOL(dma_insl); + +#define MAKE_DMA_IO(io, bwl, isize, dmasize, cnst) \ +void dma_##io##s##bwl(unsigned long addr, cnst void *buf, unsigned short len) \ +{ \ + _dma_##io(addr, (unsigned long)buf, len, isize, WDSIZE_##dmasize); \ +} \ +EXPORT_SYMBOL(dma_##io##s##bwl) +MAKE_DMA_IO(out, b, 1, 8, const); +MAKE_DMA_IO(in, b, 1, 8, ); +MAKE_DMA_IO(out, w, 2, 16, const); +MAKE_DMA_IO(in, w, 2, 16, ); +MAKE_DMA_IO(out, l, 4, 32, const); +MAKE_DMA_IO(in, l, 4, 32, ); |