summaryrefslogtreecommitdiff
path: root/arch/cris/kernel/setup.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/cris/kernel/setup.c')
-rw-r--r--arch/cris/kernel/setup.c193
1 files changed, 193 insertions, 0 deletions
diff --git a/arch/cris/kernel/setup.c b/arch/cris/kernel/setup.c
new file mode 100644
index 000000000000..6ec2671078bf
--- /dev/null
+++ b/arch/cris/kernel/setup.c
@@ -0,0 +1,193 @@
+/*
+ *
+ * linux/arch/cris/kernel/setup.c
+ *
+ * Copyright (C) 1995 Linus Torvalds
+ * Copyright (c) 2001 Axis Communications AB
+ */
+
+/*
+ * This file handles the architecture-dependent parts of initialization
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+#include <asm/pgtable.h>
+#include <linux/seq_file.h>
+#include <linux/tty.h>
+
+#include <asm/setup.h>
+
+/*
+ * Setup options
+ */
+struct drive_info_struct { char dummy[32]; } drive_info;
+struct screen_info screen_info;
+
+extern int root_mountflags;
+extern char _etext, _edata, _end;
+
+static char command_line[COMMAND_LINE_SIZE] = { 0, };
+
+extern const unsigned long text_start, edata; /* set by the linker script */
+extern unsigned long dram_start, dram_end;
+
+extern unsigned long romfs_start, romfs_length, romfs_in_flash; /* from head.S */
+
+extern void show_etrax_copyright(void); /* arch-vX/kernel/setup.c */
+
+/* This mainly sets up the memory area, and can be really confusing.
+ *
+ * The physical DRAM is virtually mapped into dram_start to dram_end
+ * (usually c0000000 to c0000000 + DRAM size). The physical address is
+ * given by the macro __pa().
+ *
+ * In this DRAM, the kernel code and data is loaded, in the beginning.
+ * It really starts at c0004000 to make room for some special pages -
+ * the start address is text_start. The kernel data ends at _end. After
+ * this the ROM filesystem is appended (if there is any).
+ *
+ * Between this address and dram_end, we have RAM pages usable to the
+ * boot code and the system.
+ *
+ */
+
+void __init
+setup_arch(char **cmdline_p)
+{
+ extern void init_etrax_debug(void);
+ unsigned long bootmap_size;
+ unsigned long start_pfn, max_pfn;
+ unsigned long memory_start;
+
+ /* register an initial console printing routine for printk's */
+
+ init_etrax_debug();
+
+ /* we should really poll for DRAM size! */
+
+ high_memory = &dram_end;
+
+ if(romfs_in_flash || !romfs_length) {
+ /* if we have the romfs in flash, or if there is no rom filesystem,
+ * our free area starts directly after the BSS
+ */
+ memory_start = (unsigned long) &_end;
+ } else {
+ /* otherwise the free area starts after the ROM filesystem */
+ printk("ROM fs in RAM, size %lu bytes\n", romfs_length);
+ memory_start = romfs_start + romfs_length;
+ }
+
+ /* process 1's initial memory region is the kernel code/data */
+
+ init_mm.start_code = (unsigned long) &text_start;
+ init_mm.end_code = (unsigned long) &_etext;
+ init_mm.end_data = (unsigned long) &_edata;
+ init_mm.brk = (unsigned long) &_end;
+
+#define PFN_UP(x) (((x) + PAGE_SIZE-1) >> PAGE_SHIFT)
+#define PFN_DOWN(x) ((x) >> PAGE_SHIFT)
+#define PFN_PHYS(x) ((x) << PAGE_SHIFT)
+
+ /* min_low_pfn points to the start of DRAM, start_pfn points
+ * to the first DRAM pages after the kernel, and max_low_pfn
+ * to the end of DRAM.
+ */
+
+ /*
+ * partially used pages are not usable - thus
+ * we are rounding upwards:
+ */
+
+ start_pfn = PFN_UP(memory_start); /* usually c0000000 + kernel + romfs */
+ max_pfn = PFN_DOWN((unsigned long)high_memory); /* usually c0000000 + dram size */
+
+ /*
+ * Initialize the boot-time allocator (start, end)
+ *
+ * We give it access to all our DRAM, but we could as well just have
+ * given it a small slice. No point in doing that though, unless we
+ * have non-contiguous memory and want the boot-stuff to be in, say,
+ * the smallest area.
+ *
+ * It will put a bitmap of the allocated pages in the beginning
+ * of the range we give it, but it won't mark the bitmaps pages
+ * as reserved. We have to do that ourselves below.
+ *
+ * We need to use init_bootmem_node instead of init_bootmem
+ * because our map starts at a quite high address (min_low_pfn).
+ */
+
+ max_low_pfn = max_pfn;
+ min_low_pfn = PAGE_OFFSET >> PAGE_SHIFT;
+
+ bootmap_size = init_bootmem_node(NODE_DATA(0), start_pfn,
+ min_low_pfn,
+ max_low_pfn);
+
+ /* And free all memory not belonging to the kernel (addr, size) */
+
+ free_bootmem(PFN_PHYS(start_pfn), PFN_PHYS(max_pfn - start_pfn));
+
+ /*
+ * Reserve the bootmem bitmap itself as well. We do this in two
+ * steps (first step was init_bootmem()) because this catches
+ * the (very unlikely) case of us accidentally initializing the
+ * bootmem allocator with an invalid RAM area.
+ *
+ * Arguments are start, size
+ */
+
+ reserve_bootmem(PFN_PHYS(start_pfn), bootmap_size);
+
+ /* paging_init() sets up the MMU and marks all pages as reserved */
+
+ paging_init();
+
+ /* We don't use a command line yet, so just re-initialize it without
+ saving anything that might be there. */
+
+ *cmdline_p = command_line;
+
+#ifdef CONFIG_ETRAX_CMDLINE
+ strlcpy(command_line, CONFIG_ETRAX_CMDLINE, COMMAND_LINE_SIZE);
+ command_line[COMMAND_LINE_SIZE - 1] = '\0';
+
+ /* Save command line for future references. */
+ memcpy(saved_command_line, command_line, COMMAND_LINE_SIZE);
+ saved_command_line[COMMAND_LINE_SIZE - 1] = '\0';
+#endif
+
+ /* give credit for the CRIS port */
+ show_etrax_copyright();
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+ /* We only got one CPU... */
+ return *pos < 1 ? (void *)1 : NULL;
+}
+
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+ ++*pos;
+ return NULL;
+}
+
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+
+extern int show_cpuinfo(struct seq_file *m, void *v);
+
+struct seq_operations cpuinfo_op = {
+ .start = c_start,
+ .next = c_next,
+ .stop = c_stop,
+ .show = show_cpuinfo,
+};
+
+