summaryrefslogtreecommitdiff
path: root/arch/ia64/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ia64/Kconfig')
-rw-r--r--arch/ia64/Kconfig420
1 files changed, 420 insertions, 0 deletions
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
new file mode 100644
index 000000000000..33fcb205fcb7
--- /dev/null
+++ b/arch/ia64/Kconfig
@@ -0,0 +1,420 @@
+#
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+
+mainmenu "IA-64 Linux Kernel Configuration"
+
+source "init/Kconfig"
+
+menu "Processor type and features"
+
+config IA64
+ bool
+ default y
+ help
+ The Itanium Processor Family is Intel's 64-bit successor to
+ the 32-bit X86 line. The IA-64 Linux project has a home
+ page at <http://www.linuxia64.org/> and a mailing list at
+ <linux-ia64@vger.kernel.org>.
+
+config 64BIT
+ bool
+ default y
+
+config MMU
+ bool
+ default y
+
+config RWSEM_XCHGADD_ALGORITHM
+ bool
+ default y
+
+config GENERIC_CALIBRATE_DELAY
+ bool
+ default y
+
+config TIME_INTERPOLATION
+ bool
+ default y
+
+config EFI
+ bool
+ default y
+
+config GENERIC_IOMAP
+ bool
+ default y
+
+choice
+ prompt "System type"
+ default IA64_GENERIC
+
+config IA64_GENERIC
+ bool "generic"
+ select NUMA
+ select ACPI_NUMA
+ select VIRTUAL_MEM_MAP
+ select DISCONTIGMEM
+ help
+ This selects the system type of your hardware. A "generic" kernel
+ will run on any supported IA-64 system. However, if you configure
+ a kernel for your specific system, it will be faster and smaller.
+
+ generic For any supported IA-64 system
+ DIG-compliant For DIG ("Developer's Interface Guide") compliant systems
+ HP-zx1/sx1000 For HP systems
+ HP-zx1/sx1000+swiotlb For HP systems with (broken) DMA-constrained devices.
+ SGI-SN2 For SGI Altix systems
+ Ski-simulator For the HP simulator <http://www.hpl.hp.com/research/linux/ski/>
+
+ If you don't know what to do, choose "generic".
+
+config IA64_DIG
+ bool "DIG-compliant"
+
+config IA64_HP_ZX1
+ bool "HP-zx1/sx1000"
+ help
+ Build a kernel that runs on HP zx1 and sx1000 systems. This adds
+ support for the HP I/O MMU.
+
+config IA64_HP_ZX1_SWIOTLB
+ bool "HP-zx1/sx1000 with software I/O TLB"
+ help
+ Build a kernel that runs on HP zx1 and sx1000 systems even when they
+ have broken PCI devices which cannot DMA to full 32 bits. Apart
+ from support for the HP I/O MMU, this includes support for the software
+ I/O TLB, which allows supporting the broken devices at the expense of
+ wasting some kernel memory (about 2MB by default).
+
+config IA64_SGI_SN2
+ bool "SGI-SN2"
+ help
+ Selecting this option will optimize the kernel for use on sn2 based
+ systems, but the resulting kernel binary will not run on other
+ types of ia64 systems. If you have an SGI Altix system, it's safe
+ to select this option. If in doubt, select ia64 generic support
+ instead.
+
+config IA64_HP_SIM
+ bool "Ski-simulator"
+
+endchoice
+
+choice
+ prompt "Processor type"
+ default ITANIUM
+
+config ITANIUM
+ bool "Itanium"
+ help
+ Select your IA-64 processor type. The default is Itanium.
+ This choice is safe for all IA-64 systems, but may not perform
+ optimally on systems with, say, Itanium 2 or newer processors.
+
+config MCKINLEY
+ bool "Itanium 2"
+ help
+ Select this to configure for an Itanium 2 (McKinley) processor.
+
+endchoice
+
+choice
+ prompt "Kernel page size"
+ default IA64_PAGE_SIZE_16KB
+
+config IA64_PAGE_SIZE_4KB
+ bool "4KB"
+ help
+ This lets you select the page size of the kernel. For best IA-64
+ performance, a page size of 8KB or 16KB is recommended. For best
+ IA-32 compatibility, a page size of 4KB should be selected (the vast
+ majority of IA-32 binaries work perfectly fine with a larger page
+ size). For Itanium 2 or newer systems, a page size of 64KB can also
+ be selected.
+
+ 4KB For best IA-32 compatibility
+ 8KB For best IA-64 performance
+ 16KB For best IA-64 performance
+ 64KB Requires Itanium 2 or newer processor.
+
+ If you don't know what to do, choose 16KB.
+
+config IA64_PAGE_SIZE_8KB
+ bool "8KB"
+
+config IA64_PAGE_SIZE_16KB
+ bool "16KB"
+
+config IA64_PAGE_SIZE_64KB
+ depends on !ITANIUM
+ bool "64KB"
+
+endchoice
+
+config IA64_BRL_EMU
+ bool
+ depends on ITANIUM
+ default y
+
+# align cache-sensitive data to 128 bytes
+config IA64_L1_CACHE_SHIFT
+ int
+ default "7" if MCKINLEY
+ default "6" if ITANIUM
+
+# align cache-sensitive data to 64 bytes
+config NUMA
+ bool "NUMA support"
+ depends on !IA64_HP_SIM
+ default y if IA64_SGI_SN2
+ select ACPI_NUMA
+ help
+ Say Y to compile the kernel to support NUMA (Non-Uniform Memory
+ Access). This option is for configuring high-end multiprocessor
+ server systems. If in doubt, say N.
+
+config VIRTUAL_MEM_MAP
+ bool "Virtual mem map"
+ default y if !IA64_HP_SIM
+ help
+ Say Y to compile the kernel with support for a virtual mem map.
+ This code also only takes effect if a memory hole of greater than
+ 1 Gb is found during boot. You must turn this option on if you
+ require the DISCONTIGMEM option for your machine. If you are
+ unsure, say Y.
+
+config HOLES_IN_ZONE
+ bool
+ default y if VIRTUAL_MEM_MAP
+
+config DISCONTIGMEM
+ bool "Discontiguous memory support"
+ depends on (IA64_DIG || IA64_SGI_SN2 || IA64_GENERIC || IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB) && NUMA && VIRTUAL_MEM_MAP
+ default y if (IA64_SGI_SN2 || IA64_GENERIC) && NUMA
+ help
+ Say Y to support efficient handling of discontiguous physical memory,
+ for architectures which are either NUMA (Non-Uniform Memory Access)
+ or have huge holes in the physical address space for other reasons.
+ See <file:Documentation/vm/numa> for more.
+
+config IA64_CYCLONE
+ bool "Cyclone (EXA) Time Source support"
+ help
+ Say Y here to enable support for IBM EXA Cyclone time source.
+ If you're unsure, answer N.
+
+config IOSAPIC
+ bool
+ depends on !IA64_HP_SIM
+ default y
+
+config IA64_SGI_SN_SIM
+ bool "SGI Medusa Simulator Support"
+ depends on IA64_SGI_SN2
+ help
+ If you are compiling a kernel that will run under SGI's IA-64
+ simulator (Medusa) then say Y, otherwise say N.
+
+config FORCE_MAX_ZONEORDER
+ int
+ default "18"
+
+config SMP
+ bool "Symmetric multi-processing support"
+ help
+ This enables support for systems with more than one CPU. If you have
+ a system with only one CPU, say N. If you have a system with more
+ than one CPU, say Y.
+
+ If you say N here, the kernel will run on single and multiprocessor
+ systems, but will use only one CPU of a multiprocessor system. If
+ you say Y here, the kernel will run on many, but not all,
+ single processor systems. On a single processor system, the kernel
+ will run faster if you say N here.
+
+ See also the <file:Documentation/smp.txt> and the SMP-HOWTO
+ available at <http://www.tldp.org/docs.html#howto>.
+
+ If you don't know what to do here, say N.
+
+config NR_CPUS
+ int "Maximum number of CPUs (2-512)"
+ range 2 512
+ depends on SMP
+ default "64"
+ help
+ You should set this to the number of CPUs in your system, but
+ keep in mind that a kernel compiled for, e.g., 2 CPUs will boot but
+ only use 2 CPUs on a >2 CPU system. Setting this to a value larger
+ than 64 will cause the use of a CPU mask array, causing a small
+ performance hit.
+
+config HOTPLUG_CPU
+ bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
+ depends on SMP && EXPERIMENTAL
+ select HOTPLUG
+ default n
+ ---help---
+ Say Y here to experiment with turning CPUs off and on. CPUs
+ can be controlled through /sys/devices/system/cpu/cpu#.
+ Say N if you want to disable CPU hotplug.
+
+config PREEMPT
+ bool "Preemptible Kernel"
+ help
+ This option reduces the latency of the kernel when reacting to
+ real-time or interactive events by allowing a low priority process to
+ be preempted even if it is in kernel mode executing a system call.
+ This allows applications to run more reliably even when the system is
+ under load.
+
+ Say Y here if you are building a kernel for a desktop, embedded
+ or real-time system. Say N if you are unsure.
+
+config HAVE_DEC_LOCK
+ bool
+ depends on (SMP || PREEMPT)
+ default y
+
+config IA32_SUPPORT
+ bool "Support for Linux/x86 binaries"
+ help
+ IA-64 processors can execute IA-32 (X86) instructions. By
+ saying Y here, the kernel will include IA-32 system call
+ emulation support which makes it possible to transparently
+ run IA-32 Linux binaries on an IA-64 Linux system.
+ If in doubt, say Y.
+
+config COMPAT
+ bool
+ depends on IA32_SUPPORT
+ default y
+
+config IA64_MCA_RECOVERY
+ tristate "MCA recovery from errors other than TLB."
+
+config PERFMON
+ bool "Performance monitor support"
+ help
+ Selects whether support for the IA-64 performance monitor hardware
+ is included in the kernel. This makes some kernel data-structures a
+ little bigger and slows down execution a bit, but it is generally
+ a good idea to turn this on. If you're unsure, say Y.
+
+config IA64_PALINFO
+ tristate "/proc/pal support"
+ help
+ If you say Y here, you are able to get PAL (Processor Abstraction
+ Layer) information in /proc/pal. This contains useful information
+ about the processors in your systems, such as cache and TLB sizes
+ and the PAL firmware version in use.
+
+ To use this option, you have to ensure that the "/proc file system
+ support" (CONFIG_PROC_FS) is enabled, too.
+
+config ACPI_DEALLOCATE_IRQ
+ bool
+ depends on IOSAPIC && EXPERIMENTAL
+ default y
+
+source "drivers/firmware/Kconfig"
+
+source "fs/Kconfig.binfmt"
+
+endmenu
+
+menu "Power management and ACPI"
+
+config PM
+ bool "Power Management support"
+ depends on IA64_GENERIC || IA64_DIG || IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB
+ default y
+ help
+ "Power Management" means that parts of your computer are shut
+ off or put into a power conserving "sleep" mode if they are not
+ being used. There are two competing standards for doing this: APM
+ and ACPI. If you want to use either one, say Y here and then also
+ to the requisite support below.
+
+ Power Management is most important for battery powered laptop
+ computers; if you have a laptop, check out the Linux Laptop home
+ page on the WWW at <http://www.linux-on-laptops.com/> and the
+ Battery Powered Linux mini-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that, even if you say N here, Linux on the x86 architecture
+ will issue the hlt instruction if nothing is to be done, thereby
+ sending the processor to sleep and saving power.
+
+config ACPI
+ bool
+ depends on !IA64_HP_SIM
+ default y
+
+if !IA64_HP_SIM
+
+source "drivers/acpi/Kconfig"
+
+endif
+
+endmenu
+
+if !IA64_HP_SIM
+
+menu "Bus options (PCI, PCMCIA)"
+
+config PCI
+ bool "PCI support"
+ help
+ Find out whether you have a PCI motherboard. PCI is the name of a
+ bus system, i.e. the way the CPU talks to the other stuff inside
+ your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
+ VESA. If you have PCI, say Y, otherwise N.
+
+ The PCI-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>, contains valuable
+ information about which PCI hardware does work under Linux and which
+ doesn't.
+
+config PCI_DOMAINS
+ bool
+ default PCI
+
+source "drivers/pci/Kconfig"
+
+source "drivers/pci/hotplug/Kconfig"
+
+source "drivers/pcmcia/Kconfig"
+
+endmenu
+
+endif
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+source "lib/Kconfig"
+
+#
+# Use the generic interrupt handling code in kernel/irq/:
+#
+config GENERIC_HARDIRQS
+ bool
+ default y
+
+config GENERIC_IRQ_PROBE
+ bool
+ default y
+
+source "arch/ia64/hp/sim/Kconfig"
+
+source "arch/ia64/oprofile/Kconfig"
+
+source "arch/ia64/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"