diff options
Diffstat (limited to 'arch/mips/Kconfig')
| -rw-r--r-- | arch/mips/Kconfig | 28 |
1 files changed, 8 insertions, 20 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index e12764c2a9d0..f75ab4a2f246 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -25,7 +25,6 @@ config MIPS select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE select HAVE_DMA_ATTRS select HAVE_DMA_API_DEBUG - select HAVE_GENERIC_HARDIRQS select GENERIC_IRQ_PROBE select GENERIC_IRQ_SHOW select GENERIC_PCI_IOMAP @@ -95,6 +94,7 @@ config ATH79 select CSRC_R4K select DMA_NONCOHERENT select HAVE_CLK + select CLKDEV_LOOKUP select IRQ_CPU select MIPS_MACHINE select SYS_HAS_CPU_MIPS32_R2 @@ -131,7 +131,6 @@ config BCM63XX select IRQ_CPU select SYS_HAS_CPU_MIPS32_R1 select SYS_HAS_CPU_BMIPS4350 if !BCM63XX_CPU_6338 && !BCM63XX_CPU_6345 && !BCM63XX_CPU_6348 - select NR_CPUS_DEFAULT_2 select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN select SYS_HAS_EARLY_PRINTK @@ -445,6 +444,8 @@ config RALINK select SYS_HAS_EARLY_PRINTK select HAVE_MACH_CLKDEV select CLKDEV_LOOKUP + select ARCH_HAS_RESET_CONTROLLER + select RESET_CONTROLLER config SGI_IP22 bool "SGI IP22 (Indy/Indigo2)" @@ -609,7 +610,6 @@ config SIBYTE_SWARM select BOOT_ELF32 select DMA_COHERENT select HAVE_PATA_PLATFORM - select NR_CPUS_DEFAULT_2 select SIBYTE_SB1250 select SWAP_IO_SPACE select SYS_HAS_CPU_SB1 @@ -623,7 +623,6 @@ config SIBYTE_LITTLESUR select BOOT_ELF32 select DMA_COHERENT select HAVE_PATA_PLATFORM - select NR_CPUS_DEFAULT_2 select SIBYTE_SB1250 select SWAP_IO_SPACE select SYS_HAS_CPU_SB1 @@ -635,7 +634,6 @@ config SIBYTE_SENTOSA bool "Sibyte BCM91250E-Sentosa" select BOOT_ELF32 select DMA_COHERENT - select NR_CPUS_DEFAULT_2 select SIBYTE_SB1250 select SWAP_IO_SPACE select SYS_HAS_CPU_SB1 @@ -727,11 +725,11 @@ config CAVIUM_OCTEON_SOC select SYS_HAS_CPU_CAVIUM_OCTEON select SWAP_IO_SPACE select HW_HAS_PCI - select ARCH_SUPPORTS_MSI select ZONE_DMA32 select USB_ARCH_HAS_OHCI select USB_ARCH_HAS_EHCI select HOLES_IN_ZONE + select ARCH_REQUIRE_GPIOLIB help This option supports all of the Octeon reference boards from Cavium Networks. It builds a kernel that dynamically determines the Octeon @@ -763,7 +761,6 @@ config NLM_XLR_BOARD select CEVT_R4K select CSRC_R4K select IRQ_CPU - select ARCH_SUPPORTS_MSI select ZONE_DMA32 if 64BIT select SYNC_R4K select SYS_HAS_EARLY_PRINTK @@ -1862,7 +1859,6 @@ config MIPS_MT_SMP select CPU_MIPSR2_IRQ_VI select CPU_MIPSR2_IRQ_EI select MIPS_MT - select NR_CPUS_DEFAULT_2 select SMP select SYS_SUPPORTS_SCHED_SMT if SMP select SYS_SUPPORTS_SMP @@ -2173,12 +2169,6 @@ config SYS_SUPPORTS_MIPS_CMP config SYS_SUPPORTS_SMP bool -config NR_CPUS_DEFAULT_1 - bool - -config NR_CPUS_DEFAULT_2 - bool - config NR_CPUS_DEFAULT_4 bool @@ -2196,10 +2186,8 @@ config NR_CPUS_DEFAULT_64 config NR_CPUS int "Maximum number of CPUs (2-64)" - range 1 64 if NR_CPUS_DEFAULT_1 + range 2 64 depends on SMP - default "1" if NR_CPUS_DEFAULT_1 - default "2" if NR_CPUS_DEFAULT_2 default "4" if NR_CPUS_DEFAULT_4 default "8" if NR_CPUS_DEFAULT_8 default "16" if NR_CPUS_DEFAULT_16 @@ -2305,9 +2293,9 @@ config KEXEC It is an ongoing process to be certain the hardware in a machine is properly shutdown, so do not be surprised if this code does not - initially work for you. It may help to enable device hotplugging - support. As of this writing the exact hardware interface is - strongly in flux, so no good recommendation can be made. + initially work for you. As of this writing the exact hardware + interface is strongly in flux, so no good recommendation can be + made. config CRASH_DUMP bool "Kernel crash dumps" |