summaryrefslogtreecommitdiff
path: root/arch/mips/ddb5xxx/ddb5477/irq.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/ddb5xxx/ddb5477/irq.c')
-rw-r--r--arch/mips/ddb5xxx/ddb5477/irq.c199
1 files changed, 199 insertions, 0 deletions
diff --git a/arch/mips/ddb5xxx/ddb5477/irq.c b/arch/mips/ddb5xxx/ddb5477/irq.c
new file mode 100644
index 000000000000..5f027bfa4af8
--- /dev/null
+++ b/arch/mips/ddb5xxx/ddb5477/irq.c
@@ -0,0 +1,199 @@
+/*
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * arch/mips/ddb5xxx/ddb5477/irq.c
+ * The irq setup and misc routines for DDB5476.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+
+#include <asm/i8259.h>
+#include <asm/system.h>
+#include <asm/mipsregs.h>
+#include <asm/debug.h>
+#include <asm/addrspace.h>
+#include <asm/bootinfo.h>
+
+#include <asm/ddb5xxx/ddb5xxx.h>
+
+
+/*
+ * IRQ mapping
+ *
+ * 0-7: 8 CPU interrupts
+ * 0 - software interrupt 0
+ * 1 - software interrupt 1
+ * 2 - most Vrc5477 interrupts are routed to this pin
+ * 3 - (optional) some other interrupts routed to this pin for debugg
+ * 4 - not used
+ * 5 - not used
+ * 6 - not used
+ * 7 - cpu timer (used by default)
+ *
+ * 8-39: 32 Vrc5477 interrupt sources
+ * (refer to the Vrc5477 manual)
+ */
+
+#define PCI0 DDB_INTPPES0
+#define PCI1 DDB_INTPPES1
+
+#define ACTIVE_LOW 1
+#define ACTIVE_HIGH 0
+
+#define LEVEL_SENSE 2
+#define EDGE_TRIGGER 0
+
+#define INTA 0
+#define INTB 1
+#define INTC 2
+#define INTD 3
+#define INTE 4
+
+static inline void
+set_pci_int_attr(u32 pci, u32 intn, u32 active, u32 trigger)
+{
+ u32 reg_value;
+ u32 reg_bitmask;
+
+ reg_value = ddb_in32(pci);
+ reg_bitmask = 0x3 << (intn * 2);
+
+ reg_value &= ~reg_bitmask;
+ reg_value |= (active | trigger) << (intn * 2);
+ ddb_out32(pci, reg_value);
+}
+
+extern void vrc5477_irq_init(u32 base);
+extern void mips_cpu_irq_init(u32 base);
+extern asmlinkage void ddb5477_handle_int(void);
+extern int setup_irq(unsigned int irq, struct irqaction *irqaction);
+static struct irqaction irq_cascade = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL };
+
+void __init arch_init_irq(void)
+{
+ /* by default, we disable all interrupts and route all vrc5477
+ * interrupts to pin 0 (irq 2) */
+ ddb_out32(DDB_INTCTRL0, 0);
+ ddb_out32(DDB_INTCTRL1, 0);
+ ddb_out32(DDB_INTCTRL2, 0);
+ ddb_out32(DDB_INTCTRL3, 0);
+
+ clear_c0_status(0xff00);
+ set_c0_status(0x0400);
+
+ /* setup PCI interrupt attributes */
+ set_pci_int_attr(PCI0, INTA, ACTIVE_LOW, LEVEL_SENSE);
+ set_pci_int_attr(PCI0, INTB, ACTIVE_LOW, LEVEL_SENSE);
+ if (mips_machtype == MACH_NEC_ROCKHOPPERII)
+ set_pci_int_attr(PCI0, INTC, ACTIVE_HIGH, LEVEL_SENSE);
+ else
+ set_pci_int_attr(PCI0, INTC, ACTIVE_LOW, LEVEL_SENSE);
+ set_pci_int_attr(PCI0, INTD, ACTIVE_LOW, LEVEL_SENSE);
+ set_pci_int_attr(PCI0, INTE, ACTIVE_LOW, LEVEL_SENSE);
+
+ set_pci_int_attr(PCI1, INTA, ACTIVE_LOW, LEVEL_SENSE);
+ set_pci_int_attr(PCI1, INTB, ACTIVE_LOW, LEVEL_SENSE);
+ set_pci_int_attr(PCI1, INTC, ACTIVE_LOW, LEVEL_SENSE);
+ set_pci_int_attr(PCI1, INTD, ACTIVE_LOW, LEVEL_SENSE);
+ set_pci_int_attr(PCI1, INTE, ACTIVE_LOW, LEVEL_SENSE);
+
+ /*
+ * for debugging purpose, we enable several error interrupts
+ * and route them to pin 1. (IP3)
+ */
+ /* cpu parity check - 0 */
+ ll_vrc5477_irq_route(0, 1); ll_vrc5477_irq_enable(0);
+ /* cpu no-target decode - 1 */
+ ll_vrc5477_irq_route(1, 1); ll_vrc5477_irq_enable(1);
+ /* local bus read time-out - 7 */
+ ll_vrc5477_irq_route(7, 1); ll_vrc5477_irq_enable(7);
+ /* PCI SERR# - 14 */
+ ll_vrc5477_irq_route(14, 1); ll_vrc5477_irq_enable(14);
+ /* PCI internal error - 15 */
+ ll_vrc5477_irq_route(15, 1); ll_vrc5477_irq_enable(15);
+ /* IOPCI SERR# - 30 */
+ ll_vrc5477_irq_route(30, 1); ll_vrc5477_irq_enable(30);
+ /* IOPCI internal error - 31 */
+ ll_vrc5477_irq_route(31, 1); ll_vrc5477_irq_enable(31);
+
+ /* init all controllers */
+ init_i8259_irqs();
+ mips_cpu_irq_init(CPU_IRQ_BASE);
+ vrc5477_irq_init(VRC5477_IRQ_BASE);
+
+
+ /* setup cascade interrupts */
+ setup_irq(VRC5477_IRQ_BASE + VRC5477_I8259_CASCADE, &irq_cascade);
+ setup_irq(CPU_IRQ_BASE + CPU_VRC5477_CASCADE, &irq_cascade);
+
+ /* hook up the first-level interrupt handler */
+ set_except_vector(0, ddb5477_handle_int);
+}
+
+u8 i8259_interrupt_ack(void)
+{
+ u8 irq;
+ u32 reg;
+
+ /* Set window 0 for interrupt acknowledge */
+ reg = ddb_in32(DDB_PCIINIT10);
+
+ ddb_set_pmr(DDB_PCIINIT10, DDB_PCICMD_IACK, 0, DDB_PCI_ACCESS_32);
+ irq = *(volatile u8 *) KSEG1ADDR(DDB_PCI_IACK_BASE);
+ ddb_out32(DDB_PCIINIT10, reg);
+
+ /* i8259.c set the base vector to be 0x0 */
+ return irq + I8259_IRQ_BASE;
+}
+/*
+ * the first level int-handler will jump here if it is a vrc5477 irq
+ */
+#define NUM_5477_IRQS 32
+asmlinkage void
+vrc5477_irq_dispatch(struct pt_regs *regs)
+{
+ u32 intStatus;
+ u32 bitmask;
+ u32 i;
+
+ db_assert(ddb_in32(DDB_INT2STAT) == 0);
+ db_assert(ddb_in32(DDB_INT3STAT) == 0);
+ db_assert(ddb_in32(DDB_INT4STAT) == 0);
+ db_assert(ddb_in32(DDB_NMISTAT) == 0);
+
+ if (ddb_in32(DDB_INT1STAT) != 0) {
+#if defined(CONFIG_RUNTIME_DEBUG)
+ vrc5477_show_int_regs();
+#endif
+ panic("error interrupt has happened.");
+ }
+
+ intStatus = ddb_in32(DDB_INT0STAT);
+
+ if (mips_machtype == MACH_NEC_ROCKHOPPERII) {
+ /* check for i8259 interrupts */
+ if (intStatus & (1 << VRC5477_I8259_CASCADE)) {
+ int i8259_irq = i8259_interrupt_ack();
+ do_IRQ(I8259_IRQ_BASE + i8259_irq, regs);
+ return;
+ }
+ }
+
+ for (i=0, bitmask=1; i<= NUM_5477_IRQS; bitmask <<=1, i++) {
+ /* do we need to "and" with the int mask? */
+ if (intStatus & bitmask) {
+ do_IRQ(VRC5477_IRQ_BASE + i, regs);
+ return;
+ }
+ }
+}