summaryrefslogtreecommitdiff
path: root/arch/mips/pci/pci-ddb5074.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/pci/pci-ddb5074.c')
-rw-r--r--arch/mips/pci/pci-ddb5074.c79
1 files changed, 79 insertions, 0 deletions
diff --git a/arch/mips/pci/pci-ddb5074.c b/arch/mips/pci/pci-ddb5074.c
new file mode 100644
index 000000000000..73f9ceeb2f55
--- /dev/null
+++ b/arch/mips/pci/pci-ddb5074.c
@@ -0,0 +1,79 @@
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+
+#include <asm/debug.h>
+
+#include <asm/ddb5xxx/ddb5xxx.h>
+
+static struct resource extpci_io_resource = {
+ "pci IO space",
+ 0x1000, /* leave some room for ISA bus */
+ DDB_PCI_IO_SIZE - 1,
+ IORESOURCE_IO
+};
+
+static struct resource extpci_mem_resource = {
+ "pci memory space",
+ DDB_PCI_MEM_BASE + 0x00100000, /* leave 1 MB for RTC */
+ DDB_PCI_MEM_BASE + DDB_PCI_MEM_SIZE - 1,
+ IORESOURCE_MEM
+};
+
+extern struct pci_ops ddb5476_ext_pci_ops;
+
+struct pci_controller ddb5476_controller = {
+ .pci_ops = &ddb5476_ext_pci_ops,
+ .io_resource = &extpci_io_resource,
+ .mem_resource = &extpci_mem_resource,
+};
+
+#define PCI_EXT_INTA 8
+#define PCI_EXT_INTB 9
+#define PCI_EXT_INTC 10
+#define PCI_EXT_INTD 11
+#define PCI_EXT_INTE 12
+
+#define MAX_SLOT_NUM 14
+
+static unsigned char irq_map[MAX_SLOT_NUM] = {
+ [ 0] = nile4_to_irq(PCI_EXT_INTE),
+ [ 1] = nile4_to_irq(PCI_EXT_INTA),
+ [ 2] = nile4_to_irq(PCI_EXT_INTA),
+ [ 3] = nile4_to_irq(PCI_EXT_INTB),
+ [ 4] = nile4_to_irq(PCI_EXT_INTC),
+ [ 5] = nile4_to_irq(NILE4_INT_UART),
+ [10] = nile4_to_irq(PCI_EXT_INTE),
+ [13] = nile4_to_irq(PCI_EXT_INTE),
+};
+
+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ return irq_map[slot];
+}
+
+/* Do platform specific device initialization at pci_enable_device() time */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ return 0;
+}
+
+void __init ddb_pci_reset_bus(void)
+{
+ u32 temp;
+
+ /*
+ * I am not sure about the "official" procedure, the following
+ * steps work as far as I know:
+ * We first set PCI cold reset bit (bit 31) in PCICTRL-H.
+ * Then we clear the PCI warm reset bit (bit 30) to 0 in PCICTRL-H.
+ * The same is true for both PCI channels.
+ */
+ temp = ddb_in32(DDB_PCICTRL + 4);
+ temp |= 0x80000000;
+ ddb_out32(DDB_PCICTRL + 4, temp);
+ temp &= ~0xc0000000;
+ ddb_out32(DDB_PCICTRL + 4, temp);
+
+}