summaryrefslogtreecommitdiff
path: root/arch/mips/powertv/powertv-usb.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/powertv/powertv-usb.c')
-rw-r--r--arch/mips/powertv/powertv-usb.c404
1 files changed, 0 insertions, 404 deletions
diff --git a/arch/mips/powertv/powertv-usb.c b/arch/mips/powertv/powertv-usb.c
deleted file mode 100644
index d845eace58e9..000000000000
--- a/arch/mips/powertv/powertv-usb.c
+++ /dev/null
@@ -1,404 +0,0 @@
-/*
- * powertv-usb.c
- *
- * Description: ASIC-specific USB device setup and shutdown
- *
- * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
- * Copyright (C) 2009 Cisco Systems, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
- * Author: Ken Eppinett
- * David Schleef <ds@schleef.org>
- *
- * NOTE: The bootloader allocates persistent memory at an address which is
- * 16 MiB below the end of the highest address in KSEG0. All fixed
- * address memory reservations must avoid this region.
- */
-
-#include <linux/kernel.h>
-#include <linux/export.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-#include <asm/mach-powertv/asic.h>
-#include <asm/mach-powertv/interrupts.h>
-
-/* misc_clk_ctl1 values */
-#define MCC1_30MHZ_POWERUP_SELECT (1 << 14)
-#define MCC1_DIV9 (1 << 13)
-#define MCC1_ETHMIPS_POWERUP_SELECT (1 << 11)
-#define MCC1_USB_POWERUP_SELECT (1 << 1)
-#define MCC1_CLOCK108_POWERUP_SELECT (1 << 0)
-
-/* Possible values for clock select */
-#define MCC1_USB_CLOCK_HIGH_Z (0 << 4)
-#define MCC1_USB_CLOCK_48MHZ (1 << 4)
-#define MCC1_USB_CLOCK_24MHZ (2 << 4)
-#define MCC1_USB_CLOCK_6MHZ (3 << 4)
-
-#define MCC1_CONFIG (MCC1_30MHZ_POWERUP_SELECT | \
- MCC1_DIV9 | \
- MCC1_ETHMIPS_POWERUP_SELECT | \
- MCC1_USB_POWERUP_SELECT | \
- MCC1_CLOCK108_POWERUP_SELECT)
-
-/* misc_clk_ctl2 values */
-#define MCC2_GMII_GCLK_TO_PAD (1 << 31)
-#define MCC2_ETHER125_0_CLOCK_SELECT (1 << 29)
-#define MCC2_RMII_0_CLOCK_SELECT (1 << 28)
-#define MCC2_GMII_TX0_CLOCK_SELECT (1 << 27)
-#define MCC2_GMII_RX0_CLOCK_SELECT (1 << 26)
-#define MCC2_ETHER125_1_CLOCK_SELECT (1 << 24)
-#define MCC2_RMII_1_CLOCK_SELECT (1 << 23)
-#define MCC2_GMII_TX1_CLOCK_SELECT (1 << 22)
-#define MCC2_GMII_RX1_CLOCK_SELECT (1 << 21)
-#define MCC2_ETHER125_2_CLOCK_SELECT (1 << 19)
-#define MCC2_RMII_2_CLOCK_SELECT (1 << 18)
-#define MCC2_GMII_TX2_CLOCK_SELECT (1 << 17)
-#define MCC2_GMII_RX2_CLOCK_SELECT (1 << 16)
-
-#define ETHER_CLK_CONFIG (MCC2_GMII_GCLK_TO_PAD | \
- MCC2_ETHER125_0_CLOCK_SELECT | \
- MCC2_RMII_0_CLOCK_SELECT | \
- MCC2_GMII_TX0_CLOCK_SELECT | \
- MCC2_GMII_RX0_CLOCK_SELECT | \
- MCC2_ETHER125_1_CLOCK_SELECT | \
- MCC2_RMII_1_CLOCK_SELECT | \
- MCC2_GMII_TX1_CLOCK_SELECT | \
- MCC2_GMII_RX1_CLOCK_SELECT | \
- MCC2_ETHER125_2_CLOCK_SELECT | \
- MCC2_RMII_2_CLOCK_SELECT | \
- MCC2_GMII_TX2_CLOCK_SELECT | \
- MCC2_GMII_RX2_CLOCK_SELECT)
-
-/* misc_clk_ctl2 definitions for Gaia */
-#define FSX4A_REF_SELECT (1 << 16)
-#define FSX4B_REF_SELECT (1 << 17)
-#define FSX4C_REF_SELECT (1 << 18)
-#define DDR_PLL_REF_SELECT (1 << 19)
-#define MIPS_PLL_REF_SELECT (1 << 20)
-
-/* Definitions for the QAM frequency select register FS432X4A4_QAM_CTL */
-#define QAM_FS_SDIV_SHIFT 29
-#define QAM_FS_MD_SHIFT 24
-#define QAM_FS_MD_MASK 0x1f /* Cut down to 5 bits */
-#define QAM_FS_PE_SHIFT 8
-
-#define QAM_FS_DISABLE_DIVIDE_BY_3 (1 << 5)
-#define QAM_FS_ENABLE_PROGRAM (1 << 4)
-#define QAM_FS_ENABLE_OUTPUT (1 << 3)
-#define QAM_FS_SELECT_TEST_BYPASS (1 << 2)
-#define QAM_FS_DISABLE_DIGITAL_STANDBY (1 << 1)
-#define QAM_FS_CHOOSE_FS (1 << 0)
-
-/* Definitions for fs432x4a_ctl register */
-#define QAM_FS_NSDIV_54MHZ (1 << 2)
-
-/* Definitions for bcm1_usb2_ctl register */
-#define BCM1_USB2_CTL_BISTOK (1 << 11)
-#define BCM1_USB2_CTL_PORT2_SHIFT_JK (1 << 7)
-#define BCM1_USB2_CTL_PORT1_SHIFT_JK (1 << 6)
-#define BCM1_USB2_CTL_PORT2_FAST_EDGE (1 << 5)
-#define BCM1_USB2_CTL_PORT1_FAST_EDGE (1 << 4)
-#define BCM1_USB2_CTL_EHCI_PRT_PWR_ACTIVE_HIGH (1 << 1)
-#define BCM1_USB2_CTL_APP_PRT_OVRCUR_IN_ACTIVE_HIGH (1 << 0)
-
-/* Definitions for crt_spare register */
-#define CRT_SPARE_PORT2_SHIFT_JK (1 << 21)
-#define CRT_SPARE_PORT1_SHIFT_JK (1 << 20)
-#define CRT_SPARE_PORT2_FAST_EDGE (1 << 19)
-#define CRT_SPARE_PORT1_FAST_EDGE (1 << 18)
-#define CRT_SPARE_DIVIDE_BY_9_FROM_432 (1 << 17)
-#define CRT_SPARE_USB_DIVIDE_BY_9 (1 << 16)
-
-/* Definitions for usb2_stbus_obc register */
-#define USB_STBUS_OBC_STORE32_LOAD32 0x3
-
-/* Definitions for usb2_stbus_mess_size register */
-#define USB2_STBUS_MESS_SIZE_2 0x1 /* 2 packets */
-
-/* Definitions for usb2_stbus_chunk_size register */
-#define USB2_STBUS_CHUNK_SIZE_2 0x1 /* 2 packets */
-
-/* Definitions for usb2_strap register */
-#define USB2_STRAP_HFREQ_SELECT 0x1
-
-/*
- * USB Host Resource Definition
- */
-
-static struct resource ehci_resources[] = {
- {
- .parent = &asic_resource,
- .start = 0,
- .end = 0xff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = irq_usbehci,
- .end = irq_usbehci,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 ehci_dmamask = 0xffffffffULL;
-
-static struct platform_device ehci_device = {
- .name = "powertv-ehci",
- .id = 0,
- .num_resources = 2,
- .resource = ehci_resources,
- .dev = {
- .dma_mask = &ehci_dmamask,
- .coherent_dma_mask = 0xffffffff,
- },
-};
-
-static struct resource ohci_resources[] = {
- {
- .parent = &asic_resource,
- .start = 0,
- .end = 0xff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = irq_usbohci,
- .end = irq_usbohci,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 ohci_dmamask = 0xffffffffULL;
-
-static struct platform_device ohci_device = {
- .name = "powertv-ohci",
- .id = 0,
- .num_resources = 2,
- .resource = ohci_resources,
- .dev = {
- .dma_mask = &ohci_dmamask,
- .coherent_dma_mask = 0xffffffff,
- },
-};
-
-static unsigned usb_users;
-static DEFINE_SPINLOCK(usb_regs_lock);
-
-/*
- *
- * fs_update - set frequency synthesizer for USB
- * @pe_bits Phase tap setting
- * @md_bits Coarse selector bus for algorithm of phase tap
- * @sdiv_bits Output divider setting
- * @disable_div_by_3 Either QAM_FS_DISABLE_DIVIDE_BY_3 or zero
- * @standby Either QAM_FS_DISABLE_DIGITAL_STANDBY or zero
- *
- * QAM frequency selection code, which affects the frequency at which USB
- * runs. The frequency is calculated as:
- * 2^15 * ndiv * Fin
- * Fout = ------------------------------------------------------------
- * (sdiv * (ipe * (1 + md/32) - (ipe - 2^15)*(1 + (md + 1)/32)))
- * where:
- * Fin 54 MHz
- * ndiv QAM_FS_NSDIV_54MHZ ? 8 : 16
- * sdiv 1 << (sdiv_bits + 1)
- * ipe Same as pe_bits
- * md A five-bit, two's-complement integer (range [-16, 15]), which
- * is the lower 5 bits of md_bits.
- */
-static void fs_update(u32 pe_bits, int md_bits, u32 sdiv_bits,
- u32 disable_div_by_3, u32 standby)
-{
- u32 val;
-
- val = ((sdiv_bits << QAM_FS_SDIV_SHIFT) |
- ((md_bits & QAM_FS_MD_MASK) << QAM_FS_MD_SHIFT) |
- (pe_bits << QAM_FS_PE_SHIFT) |
- QAM_FS_ENABLE_OUTPUT |
- standby |
- disable_div_by_3);
- asic_write(val, fs432x4b4_usb_ctl);
- asic_write(val | QAM_FS_ENABLE_PROGRAM, fs432x4b4_usb_ctl);
- asic_write(val | QAM_FS_ENABLE_PROGRAM | QAM_FS_CHOOSE_FS,
- fs432x4b4_usb_ctl);
-}
-
-/*
- * usb_eye_configure - for optimizing the shape USB eye waveform
- * @set: Bits to set in the register
- * @clear: Bits to clear in the register; each bit with a one will
- * be set in the register, zero bits will not be modified
- */
-static void usb_eye_configure(u32 set, u32 clear)
-{
- u32 old;
-
- old = asic_read(crt_spare);
- old |= set;
- old &= ~clear;
- asic_write(old, crt_spare);
-}
-
-/*
- * platform_configure_usb - usb configuration based on platform type.
- */
-static void platform_configure_usb(void)
-{
- u32 bcm1_usb2_ctl_value;
- enum asic_type asic_type;
- unsigned long flags;
-
- spin_lock_irqsave(&usb_regs_lock, flags);
- usb_users++;
-
- if (usb_users != 1) {
- spin_unlock_irqrestore(&usb_regs_lock, flags);
- return;
- }
-
- asic_type = platform_get_asic();
-
- switch (asic_type) {
- case ASIC_ZEUS:
- fs_update(0x0000, -15, 0x02, 0, 0);
- bcm1_usb2_ctl_value = BCM1_USB2_CTL_EHCI_PRT_PWR_ACTIVE_HIGH |
- BCM1_USB2_CTL_APP_PRT_OVRCUR_IN_ACTIVE_HIGH;
- break;
-
- case ASIC_CRONUS:
- case ASIC_CRONUSLITE:
- usb_eye_configure(0, CRT_SPARE_USB_DIVIDE_BY_9);
- fs_update(0x8000, -14, 0x03, QAM_FS_DISABLE_DIVIDE_BY_3,
- QAM_FS_DISABLE_DIGITAL_STANDBY);
- bcm1_usb2_ctl_value = BCM1_USB2_CTL_EHCI_PRT_PWR_ACTIVE_HIGH |
- BCM1_USB2_CTL_APP_PRT_OVRCUR_IN_ACTIVE_HIGH;
- break;
-
- case ASIC_CALLIOPE:
- fs_update(0x0000, -15, 0x02, QAM_FS_DISABLE_DIVIDE_BY_3,
- QAM_FS_DISABLE_DIGITAL_STANDBY);
-
- switch (platform_get_family()) {
- case FAMILY_1500VZE:
- break;
-
- case FAMILY_1500VZF:
- usb_eye_configure(CRT_SPARE_PORT2_SHIFT_JK |
- CRT_SPARE_PORT1_SHIFT_JK |
- CRT_SPARE_PORT2_FAST_EDGE |
- CRT_SPARE_PORT1_FAST_EDGE, 0);
- break;
-
- default:
- usb_eye_configure(CRT_SPARE_PORT2_SHIFT_JK |
- CRT_SPARE_PORT1_SHIFT_JK, 0);
- break;
- }
-
- bcm1_usb2_ctl_value = BCM1_USB2_CTL_BISTOK |
- BCM1_USB2_CTL_EHCI_PRT_PWR_ACTIVE_HIGH |
- BCM1_USB2_CTL_APP_PRT_OVRCUR_IN_ACTIVE_HIGH;
- break;
-
- case ASIC_GAIA:
- fs_update(0x8000, -14, 0x03, QAM_FS_DISABLE_DIVIDE_BY_3,
- QAM_FS_DISABLE_DIGITAL_STANDBY);
- bcm1_usb2_ctl_value = BCM1_USB2_CTL_BISTOK |
- BCM1_USB2_CTL_EHCI_PRT_PWR_ACTIVE_HIGH |
- BCM1_USB2_CTL_APP_PRT_OVRCUR_IN_ACTIVE_HIGH;
- break;
-
- default:
- pr_err("Unknown ASIC type: %d\n", asic_type);
- bcm1_usb2_ctl_value = 0;
- break;
- }
-
- /* turn on USB power */
- asic_write(0, usb2_strap);
- /* Enable all OHCI interrupts */
- asic_write(bcm1_usb2_ctl_value, usb2_control);
- /* usb2_stbus_obc store32/load32 */
- asic_write(USB_STBUS_OBC_STORE32_LOAD32, usb2_stbus_obc);
- /* usb2_stbus_mess_size 2 packets */
- asic_write(USB2_STBUS_MESS_SIZE_2, usb2_stbus_mess_size);
- /* usb2_stbus_chunk_size 2 packets */
- asic_write(USB2_STBUS_CHUNK_SIZE_2, usb2_stbus_chunk_size);
- spin_unlock_irqrestore(&usb_regs_lock, flags);
-}
-
-static void platform_unconfigure_usb(void)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&usb_regs_lock, flags);
- usb_users--;
- if (usb_users == 0)
- asic_write(USB2_STRAP_HFREQ_SELECT, usb2_strap);
- spin_unlock_irqrestore(&usb_regs_lock, flags);
-}
-
-/*
- * Set up the USB EHCI interface
- */
-void platform_configure_usb_ehci()
-{
- platform_configure_usb();
-}
-EXPORT_SYMBOL(platform_configure_usb_ehci);
-
-/*
- * Set up the USB OHCI interface
- */
-void platform_configure_usb_ohci()
-{
- platform_configure_usb();
-}
-EXPORT_SYMBOL(platform_configure_usb_ohci);
-
-/*
- * Shut the USB EHCI interface down
- */
-void platform_unconfigure_usb_ehci()
-{
- platform_unconfigure_usb();
-}
-EXPORT_SYMBOL(platform_unconfigure_usb_ehci);
-
-/*
- * Shut the USB OHCI interface down
- */
-void platform_unconfigure_usb_ohci()
-{
- platform_unconfigure_usb();
-}
-EXPORT_SYMBOL(platform_unconfigure_usb_ohci);
-
-/**
- * platform_devices_init - sets up USB device resourse.
- */
-int __init platform_usb_devices_init(struct platform_device **ehci_dev,
- struct platform_device **ohci_dev)
-{
- *ehci_dev = &ehci_device;
- ehci_resources[0].start = asic_reg_phys_addr(ehci_hcapbase);
- ehci_resources[0].end += ehci_resources[0].start;
-
- *ohci_dev = &ohci_device;
- ohci_resources[0].start = asic_reg_phys_addr(ohci_hc_revision);
- ohci_resources[0].end += ohci_resources[0].start;
-
- return 0;
-}