summaryrefslogtreecommitdiff
path: root/arch/mips/powertv/powertv_setup.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/powertv/powertv_setup.c')
-rw-r--r--arch/mips/powertv/powertv_setup.c319
1 files changed, 0 insertions, 319 deletions
diff --git a/arch/mips/powertv/powertv_setup.c b/arch/mips/powertv/powertv_setup.c
deleted file mode 100644
index 24689bff1039..000000000000
--- a/arch/mips/powertv/powertv_setup.c
+++ /dev/null
@@ -1,319 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
- * Portions copyright (C) 2009 Cisco Systems, Inc.
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/pci.h>
-#include <linux/screen_info.h>
-#include <linux/notifier.h>
-#include <linux/etherdevice.h>
-#include <linux/if_ether.h>
-#include <linux/ctype.h>
-#include <linux/cpu.h>
-#include <linux/time.h>
-
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/mips-boards/generic.h>
-#include <asm/dma.h>
-#include <asm/asm.h>
-#include <asm/traps.h>
-#include <asm/asm-offsets.h>
-#include "reset.h"
-
-#define VAL(n) STR(n)
-
-/*
- * Macros for loading addresses and storing registers:
- * LONG_L_ Stringified version of LONG_L for use in asm() statement
- * LONG_S_ Stringified version of LONG_S for use in asm() statement
- * PTR_LA_ Stringified version of PTR_LA for use in asm() statement
- * REG_SIZE Number of 8-bit bytes in a full width register
- */
-#define LONG_L_ VAL(LONG_L) " "
-#define LONG_S_ VAL(LONG_S) " "
-#define PTR_LA_ VAL(PTR_LA) " "
-
-#ifdef CONFIG_64BIT
-#warning TODO: 64-bit code needs to be verified
-#define REG_SIZE "8" /* In bytes */
-#endif
-
-#ifdef CONFIG_32BIT
-#define REG_SIZE "4" /* In bytes */
-#endif
-
-static void register_panic_notifier(void);
-static int panic_handler(struct notifier_block *notifier_block,
- unsigned long event, void *cause_string);
-
-const char *get_system_type(void)
-{
- return "PowerTV";
-}
-
-void __init plat_mem_setup(void)
-{
- panic_on_oops = 1;
- register_panic_notifier();
-
-#if 0
- mips_pcibios_init();
-#endif
- mips_reboot_setup();
-}
-
-/*
- * Install a panic notifier for platform-specific diagnostics
- */
-static void register_panic_notifier()
-{
- static struct notifier_block panic_notifier = {
- .notifier_call = panic_handler,
- .next = NULL,
- .priority = INT_MAX
- };
- atomic_notifier_chain_register(&panic_notifier_list, &panic_notifier);
-}
-
-static int panic_handler(struct notifier_block *notifier_block,
- unsigned long event, void *cause_string)
-{
- struct pt_regs my_regs;
-
- /* Save all of the registers */
- {
- unsigned long at, v0, v1; /* Must be on the stack */
-
- /* Start by saving $at and v0 on the stack. We use $at
- * ourselves, but it looks like the compiler may use v0 or v1
- * to load the address of the pt_regs structure. We'll come
- * back later to store the registers in the pt_regs
- * structure. */
- __asm__ __volatile__ (
- ".set noat\n"
- LONG_S_ "$at, %[at]\n"
- LONG_S_ "$2, %[v0]\n"
- LONG_S_ "$3, %[v1]\n"
- :
- [at] "=m" (at),
- [v0] "=m" (v0),
- [v1] "=m" (v1)
- :
- : "at"
- );
-
- __asm__ __volatile__ (
- ".set noat\n"
- "move $at, %[pt_regs]\n"
-
- /* Argument registers */
- LONG_S_ "$4, " VAL(PT_R4) "($at)\n"
- LONG_S_ "$5, " VAL(PT_R5) "($at)\n"
- LONG_S_ "$6, " VAL(PT_R6) "($at)\n"
- LONG_S_ "$7, " VAL(PT_R7) "($at)\n"
-
- /* Temporary regs */
- LONG_S_ "$8, " VAL(PT_R8) "($at)\n"
- LONG_S_ "$9, " VAL(PT_R9) "($at)\n"
- LONG_S_ "$10, " VAL(PT_R10) "($at)\n"
- LONG_S_ "$11, " VAL(PT_R11) "($at)\n"
- LONG_S_ "$12, " VAL(PT_R12) "($at)\n"
- LONG_S_ "$13, " VAL(PT_R13) "($at)\n"
- LONG_S_ "$14, " VAL(PT_R14) "($at)\n"
- LONG_S_ "$15, " VAL(PT_R15) "($at)\n"
-
- /* "Saved" registers */
- LONG_S_ "$16, " VAL(PT_R16) "($at)\n"
- LONG_S_ "$17, " VAL(PT_R17) "($at)\n"
- LONG_S_ "$18, " VAL(PT_R18) "($at)\n"
- LONG_S_ "$19, " VAL(PT_R19) "($at)\n"
- LONG_S_ "$20, " VAL(PT_R20) "($at)\n"
- LONG_S_ "$21, " VAL(PT_R21) "($at)\n"
- LONG_S_ "$22, " VAL(PT_R22) "($at)\n"
- LONG_S_ "$23, " VAL(PT_R23) "($at)\n"
-
- /* Add'l temp regs */
- LONG_S_ "$24, " VAL(PT_R24) "($at)\n"
- LONG_S_ "$25, " VAL(PT_R25) "($at)\n"
-
- /* Kernel temp regs */
- LONG_S_ "$26, " VAL(PT_R26) "($at)\n"
- LONG_S_ "$27, " VAL(PT_R27) "($at)\n"
-
- /* Global pointer, stack pointer, frame pointer and
- * return address */
- LONG_S_ "$gp, " VAL(PT_R28) "($at)\n"
- LONG_S_ "$sp, " VAL(PT_R29) "($at)\n"
- LONG_S_ "$fp, " VAL(PT_R30) "($at)\n"
- LONG_S_ "$ra, " VAL(PT_R31) "($at)\n"
-
- /* Now we can get the $at and v0 registers back and
- * store them */
- LONG_L_ "$8, %[at]\n"
- LONG_S_ "$8, " VAL(PT_R1) "($at)\n"
- LONG_L_ "$8, %[v0]\n"
- LONG_S_ "$8, " VAL(PT_R2) "($at)\n"
- LONG_L_ "$8, %[v1]\n"
- LONG_S_ "$8, " VAL(PT_R3) "($at)\n"
- :
- :
- [at] "m" (at),
- [v0] "m" (v0),
- [v1] "m" (v1),
- [pt_regs] "r" (&my_regs)
- : "at", "t0"
- );
-
- /* Set the current EPC value to be the current location in this
- * function */
- __asm__ __volatile__ (
- ".set noat\n"
- "1:\n"
- PTR_LA_ "$at, 1b\n"
- LONG_S_ "$at, %[cp0_epc]\n"
- :
- [cp0_epc] "=m" (my_regs.cp0_epc)
- :
- : "at"
- );
-
- my_regs.cp0_cause = read_c0_cause();
- my_regs.cp0_status = read_c0_status();
- }
-
- pr_crit("I'm feeling a bit sleepy. hmmmmm... perhaps a nap would... "
- "zzzz... \n");
-
- return NOTIFY_DONE;
-}
-
-/* Information about the RF MAC address, if one was supplied on the
- * command line. */
-static bool have_rfmac;
-static u8 rfmac[ETH_ALEN];
-
-static int rfmac_param(char *p)
-{
- u8 *q;
- bool is_high_nibble;
- int c;
-
- /* Skip a leading "0x", if present */
- if (*p == '0' && *(p+1) == 'x')
- p += 2;
-
- q = rfmac;
- is_high_nibble = true;
-
- for (c = (unsigned char) *p++;
- isxdigit(c) && q - rfmac < ETH_ALEN;
- c = (unsigned char) *p++) {
- int nibble;
-
- nibble = (isdigit(c) ? (c - '0') :
- (isupper(c) ? c - 'A' + 10 : c - 'a' + 10));
-
- if (is_high_nibble)
- *q = nibble << 4;
- else
- *q++ |= nibble;
-
- is_high_nibble = !is_high_nibble;
- }
-
- /* If we parsed all the way to the end of the parameter value and
- * parsed all ETH_ALEN bytes, we have a usable RF MAC address */
- have_rfmac = (c == '\0' && q - rfmac == ETH_ALEN);
-
- return 0;
-}
-
-early_param("rfmac", rfmac_param);
-
-/*
- * Generate an Ethernet MAC address that has a good chance of being unique.
- * @addr: Pointer to six-byte array containing the Ethernet address
- * Generates an Ethernet MAC address that is highly likely to be unique for
- * this particular system on a network with other systems of the same type.
- *
- * The problem we are solving is that, when eth_random_addr() is used to
- * generate MAC addresses at startup, there isn't much entropy for the random
- * number generator to use and the addresses it produces are fairly likely to
- * be the same as those of other identical systems on the same local network.
- * This is true even for relatively small numbers of systems (for the reason
- * why, see the Wikipedia entry for "Birthday problem" at:
- * http://en.wikipedia.org/wiki/Birthday_problem
- *
- * The good news is that we already have a MAC address known to be unique, the
- * RF MAC address. The bad news is that this address is already in use on the
- * RF interface. Worse, the obvious trick, taking the RF MAC address and
- * turning on the locally managed bit, has already been used for other devices.
- * Still, this does give us something to work with.
- *
- * The approach we take is:
- * 1. If we can't get the RF MAC Address, just call eth_random_addr.
- * 2. Use the 24-bit NIC-specific bits of the RF MAC address as the last 24
- * bits of the new address. This is very likely to be unique, except for
- * the current box.
- * 3. To avoid using addresses already on the current box, we set the top
- * six bits of the address with a value different from any currently
- * registered Scientific Atlanta organizationally unique identifyer
- * (OUI). This avoids duplication with any addresses on the system that
- * were generated from valid Scientific Atlanta-registered address by
- * simply flipping the locally managed bit.
- * 4. We aren't generating a multicast address, so we leave the multicast
- * bit off. Since we aren't using a registered address, we have to set
- * the locally managed bit.
- * 5. We then randomly generate the remaining 16-bits. This does two
- * things:
- * a. It allows us to call this function for more than one device
- * in this system
- * b. It ensures that things will probably still work even if
- * some device on the device network has a locally managed
- * address that matches the top six bits from step 2.
- */
-void platform_random_ether_addr(u8 addr[ETH_ALEN])
-{
- const int num_random_bytes = 2;
- const unsigned char non_sciatl_oui_bits = 0xc0u;
- const unsigned char mac_addr_locally_managed = (1 << 1);
-
- if (!have_rfmac) {
- pr_warning("rfmac not available on command line; "
- "generating random MAC address\n");
- eth_random_addr(addr);
- }
-
- else {
- int i;
-
- /* Set the first byte to something that won't match a Scientific
- * Atlanta OUI, is locally managed, and isn't a multicast
- * address */
- addr[0] = non_sciatl_oui_bits | mac_addr_locally_managed;
-
- /* Get some bytes of random address information */
- get_random_bytes(&addr[1], num_random_bytes);
-
- /* Copy over the NIC-specific bits of the RF MAC address */
- for (i = 1 + num_random_bytes; i < ETH_ALEN; i++)
- addr[i] = rfmac[i];
- }
-}