summaryrefslogtreecommitdiff
path: root/arch/powerpc/include/asm/pgtable-ppc32.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/include/asm/pgtable-ppc32.h')
-rw-r--r--arch/powerpc/include/asm/pgtable-ppc32.h557
1 files changed, 22 insertions, 535 deletions
diff --git a/arch/powerpc/include/asm/pgtable-ppc32.h b/arch/powerpc/include/asm/pgtable-ppc32.h
index 820b5f0a35ce..ba45c997830f 100644
--- a/arch/powerpc/include/asm/pgtable-ppc32.h
+++ b/arch/powerpc/include/asm/pgtable-ppc32.h
@@ -19,55 +19,6 @@ extern int icache_44x_need_flush;
#endif /* __ASSEMBLY__ */
/*
- * The PowerPC MMU uses a hash table containing PTEs, together with
- * a set of 16 segment registers (on 32-bit implementations), to define
- * the virtual to physical address mapping.
- *
- * We use the hash table as an extended TLB, i.e. a cache of currently
- * active mappings. We maintain a two-level page table tree, much
- * like that used by the i386, for the sake of the Linux memory
- * management code. Low-level assembler code in hashtable.S
- * (procedure hash_page) is responsible for extracting ptes from the
- * tree and putting them into the hash table when necessary, and
- * updating the accessed and modified bits in the page table tree.
- */
-
-/*
- * The PowerPC MPC8xx uses a TLB with hardware assisted, software tablewalk.
- * We also use the two level tables, but we can put the real bits in them
- * needed for the TLB and tablewalk. These definitions require Mx_CTR.PPM = 0,
- * Mx_CTR.PPCS = 0, and MD_CTR.TWAM = 1. The level 2 descriptor has
- * additional page protection (when Mx_CTR.PPCS = 1) that allows TLB hit
- * based upon user/super access. The TLB does not have accessed nor write
- * protect. We assume that if the TLB get loaded with an entry it is
- * accessed, and overload the changed bit for write protect. We use
- * two bits in the software pte that are supposed to be set to zero in
- * the TLB entry (24 and 25) for these indicators. Although the level 1
- * descriptor contains the guarded and writethrough/copyback bits, we can
- * set these at the page level since they get copied from the Mx_TWC
- * register when the TLB entry is loaded. We will use bit 27 for guard, since
- * that is where it exists in the MD_TWC, and bit 26 for writethrough.
- * These will get masked from the level 2 descriptor at TLB load time, and
- * copied to the MD_TWC before it gets loaded.
- * Large page sizes added. We currently support two sizes, 4K and 8M.
- * This also allows a TLB hander optimization because we can directly
- * load the PMD into MD_TWC. The 8M pages are only used for kernel
- * mapping of well known areas. The PMD (PGD) entries contain control
- * flags in addition to the address, so care must be taken that the
- * software no longer assumes these are only pointers.
- */
-
-/*
- * At present, all PowerPC 400-class processors share a similar TLB
- * architecture. The instruction and data sides share a unified,
- * 64-entry, fully-associative TLB which is maintained totally under
- * software control. In addition, the instruction side has a
- * hardware-managed, 4-entry, fully-associative TLB which serves as a
- * first level to the shared TLB. These two TLBs are known as the UTLB
- * and ITLB, respectively (see "mmu.h" for definitions).
- */
-
-/*
* The normal case is that PTEs are 32-bits and we have a 1-page
* 1024-entry pgdir pointing to 1-page 1024-entry PTE pages. -- paulus
*
@@ -135,409 +86,22 @@ extern int icache_44x_need_flush;
*/
#if defined(CONFIG_40x)
-
-/* There are several potential gotchas here. The 40x hardware TLBLO
- field looks like this:
-
- 0 1 2 3 4 ... 18 19 20 21 22 23 24 25 26 27 28 29 30 31
- RPN..................... 0 0 EX WR ZSEL....... W I M G
-
- Where possible we make the Linux PTE bits match up with this
-
- - bits 20 and 21 must be cleared, because we use 4k pages (40x can
- support down to 1k pages), this is done in the TLBMiss exception
- handler.
- - We use only zones 0 (for kernel pages) and 1 (for user pages)
- of the 16 available. Bit 24-26 of the TLB are cleared in the TLB
- miss handler. Bit 27 is PAGE_USER, thus selecting the correct
- zone.
- - PRESENT *must* be in the bottom two bits because swap cache
- entries use the top 30 bits. Because 40x doesn't support SMP
- anyway, M is irrelevant so we borrow it for PAGE_PRESENT. Bit 30
- is cleared in the TLB miss handler before the TLB entry is loaded.
- - All other bits of the PTE are loaded into TLBLO without
- modification, leaving us only the bits 20, 21, 24, 25, 26, 30 for
- software PTE bits. We actually use use bits 21, 24, 25, and
- 30 respectively for the software bits: ACCESSED, DIRTY, RW, and
- PRESENT.
-*/
-
-/* Definitions for 40x embedded chips. */
-#define _PAGE_GUARDED 0x001 /* G: page is guarded from prefetch */
-#define _PAGE_FILE 0x001 /* when !present: nonlinear file mapping */
-#define _PAGE_PRESENT 0x002 /* software: PTE contains a translation */
-#define _PAGE_NO_CACHE 0x004 /* I: caching is inhibited */
-#define _PAGE_WRITETHRU 0x008 /* W: caching is write-through */
-#define _PAGE_USER 0x010 /* matches one of the zone permission bits */
-#define _PAGE_RW 0x040 /* software: Writes permitted */
-#define _PAGE_DIRTY 0x080 /* software: dirty page */
-#define _PAGE_HWWRITE 0x100 /* hardware: Dirty & RW, set in exception */
-#define _PAGE_HWEXEC 0x200 /* hardware: EX permission */
-#define _PAGE_ACCESSED 0x400 /* software: R: page referenced */
-
-#define _PMD_PRESENT 0x400 /* PMD points to page of PTEs */
-#define _PMD_BAD 0x802
-#define _PMD_SIZE 0x0e0 /* size field, != 0 for large-page PMD entry */
-#define _PMD_SIZE_4M 0x0c0
-#define _PMD_SIZE_16M 0x0e0
-#define PMD_PAGE_SIZE(pmdval) (1024 << (((pmdval) & _PMD_SIZE) >> 4))
-
-/* Until my rework is finished, 40x still needs atomic PTE updates */
-#define PTE_ATOMIC_UPDATES 1
-
+#include <asm/pte-40x.h>
#elif defined(CONFIG_44x)
-/*
- * Definitions for PPC440
- *
- * Because of the 3 word TLB entries to support 36-bit addressing,
- * the attribute are difficult to map in such a fashion that they
- * are easily loaded during exception processing. I decided to
- * organize the entry so the ERPN is the only portion in the
- * upper word of the PTE and the attribute bits below are packed
- * in as sensibly as they can be in the area below a 4KB page size
- * oriented RPN. This at least makes it easy to load the RPN and
- * ERPN fields in the TLB. -Matt
- *
- * Note that these bits preclude future use of a page size
- * less than 4KB.
- *
- *
- * PPC 440 core has following TLB attribute fields;
- *
- * TLB1:
- * 0 1 2 3 4 ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
- * RPN................................. - - - - - - ERPN.......
- *
- * TLB2:
- * 0 1 2 3 4 ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
- * - - - - - - U0 U1 U2 U3 W I M G E - UX UW UR SX SW SR
- *
- * Newer 440 cores (440x6 as used on AMCC 460EX/460GT) have additional
- * TLB2 storage attibute fields. Those are:
- *
- * TLB2:
- * 0...10 11 12 13 14 15 16...31
- * no change WL1 IL1I IL1D IL2I IL2D no change
- *
- * There are some constrains and options, to decide mapping software bits
- * into TLB entry.
- *
- * - PRESENT *must* be in the bottom three bits because swap cache
- * entries use the top 29 bits for TLB2.
- *
- * - FILE *must* be in the bottom three bits because swap cache
- * entries use the top 29 bits for TLB2.
- *
- * - CACHE COHERENT bit (M) has no effect on original PPC440 cores,
- * because it doesn't support SMP. However, some later 460 variants
- * have -some- form of SMP support and so I keep the bit there for
- * future use
- *
- * With the PPC 44x Linux implementation, the 0-11th LSBs of the PTE are used
- * for memory protection related functions (see PTE structure in
- * include/asm-ppc/mmu.h). The _PAGE_XXX definitions in this file map to the
- * above bits. Note that the bit values are CPU specific, not architecture
- * specific.
- *
- * The kernel PTE entry holds an arch-dependent swp_entry structure under
- * certain situations. In other words, in such situations some portion of
- * the PTE bits are used as a swp_entry. In the PPC implementation, the
- * 3-24th LSB are shared with swp_entry, however the 0-2nd three LSB still
- * hold protection values. That means the three protection bits are
- * reserved for both PTE and SWAP entry at the most significant three
- * LSBs.
- *
- * There are three protection bits available for SWAP entry:
- * _PAGE_PRESENT
- * _PAGE_FILE
- * _PAGE_HASHPTE (if HW has)
- *
- * So those three bits have to be inside of 0-2nd LSB of PTE.
- *
- */
-
-#define _PAGE_PRESENT 0x00000001 /* S: PTE valid */
-#define _PAGE_RW 0x00000002 /* S: Write permission */
-#define _PAGE_FILE 0x00000004 /* S: nonlinear file mapping */
-#define _PAGE_HWEXEC 0x00000004 /* H: Execute permission */
-#define _PAGE_ACCESSED 0x00000008 /* S: Page referenced */
-#define _PAGE_DIRTY 0x00000010 /* S: Page dirty */
-#define _PAGE_SPECIAL 0x00000020 /* S: Special page */
-#define _PAGE_USER 0x00000040 /* S: User page */
-#define _PAGE_ENDIAN 0x00000080 /* H: E bit */
-#define _PAGE_GUARDED 0x00000100 /* H: G bit */
-#define _PAGE_COHERENT 0x00000200 /* H: M bit */
-#define _PAGE_NO_CACHE 0x00000400 /* H: I bit */
-#define _PAGE_WRITETHRU 0x00000800 /* H: W bit */
-
-/* TODO: Add large page lowmem mapping support */
-#define _PMD_PRESENT 0
-#define _PMD_PRESENT_MASK (PAGE_MASK)
-#define _PMD_BAD (~PAGE_MASK)
-
-/* ERPN in a PTE never gets cleared, ignore it */
-#define _PTE_NONE_MASK 0xffffffff00000000ULL
-
-#define __HAVE_ARCH_PTE_SPECIAL
-
+#include <asm/pte-44x.h>
#elif defined(CONFIG_FSL_BOOKE)
-/*
- MMU Assist Register 3:
-
- 32 33 34 35 36 ... 50 51 52 53 54 55 56 57 58 59 60 61 62 63
- RPN...................... 0 0 U0 U1 U2 U3 UX SX UW SW UR SR
-
- - PRESENT *must* be in the bottom three bits because swap cache
- entries use the top 29 bits.
-
- - FILE *must* be in the bottom three bits because swap cache
- entries use the top 29 bits.
-*/
-
-/* Definitions for FSL Book-E Cores */
-#define _PAGE_PRESENT 0x00001 /* S: PTE contains a translation */
-#define _PAGE_USER 0x00002 /* S: User page (maps to UR) */
-#define _PAGE_FILE 0x00002 /* S: when !present: nonlinear file mapping */
-#define _PAGE_RW 0x00004 /* S: Write permission (SW) */
-#define _PAGE_DIRTY 0x00008 /* S: Page dirty */
-#define _PAGE_HWEXEC 0x00010 /* H: SX permission */
-#define _PAGE_ACCESSED 0x00020 /* S: Page referenced */
-
-#define _PAGE_ENDIAN 0x00040 /* H: E bit */
-#define _PAGE_GUARDED 0x00080 /* H: G bit */
-#define _PAGE_COHERENT 0x00100 /* H: M bit */
-#define _PAGE_NO_CACHE 0x00200 /* H: I bit */
-#define _PAGE_WRITETHRU 0x00400 /* H: W bit */
-#define _PAGE_SPECIAL 0x00800 /* S: Special page */
-
-#ifdef CONFIG_PTE_64BIT
-/* ERPN in a PTE never gets cleared, ignore it */
-#define _PTE_NONE_MASK 0xffffffffffff0000ULL
-#endif
-
-#define _PMD_PRESENT 0
-#define _PMD_PRESENT_MASK (PAGE_MASK)
-#define _PMD_BAD (~PAGE_MASK)
-
-#define __HAVE_ARCH_PTE_SPECIAL
-
+#include <asm/pte-fsl-booke.h>
#elif defined(CONFIG_8xx)
-/* Definitions for 8xx embedded chips. */
-#define _PAGE_PRESENT 0x0001 /* Page is valid */
-#define _PAGE_FILE 0x0002 /* when !present: nonlinear file mapping */
-#define _PAGE_NO_CACHE 0x0002 /* I: cache inhibit */
-#define _PAGE_SHARED 0x0004 /* No ASID (context) compare */
-
-/* These five software bits must be masked out when the entry is loaded
- * into the TLB.
- */
-#define _PAGE_EXEC 0x0008 /* software: i-cache coherency required */
-#define _PAGE_GUARDED 0x0010 /* software: guarded access */
-#define _PAGE_DIRTY 0x0020 /* software: page changed */
-#define _PAGE_RW 0x0040 /* software: user write access allowed */
-#define _PAGE_ACCESSED 0x0080 /* software: page referenced */
-
-/* Setting any bits in the nibble with the follow two controls will
- * require a TLB exception handler change. It is assumed unused bits
- * are always zero.
- */
-#define _PAGE_HWWRITE 0x0100 /* h/w write enable: never set in Linux PTE */
-#define _PAGE_USER 0x0800 /* One of the PP bits, the other is USER&~RW */
-
-#define _PMD_PRESENT 0x0001
-#define _PMD_BAD 0x0ff0
-#define _PMD_PAGE_MASK 0x000c
-#define _PMD_PAGE_8M 0x000c
-
-#define _PTE_NONE_MASK _PAGE_ACCESSED
-
-/* Until my rework is finished, 8xx still needs atomic PTE updates */
-#define PTE_ATOMIC_UPDATES 1
-
+#include <asm/pte-8xx.h>
#else /* CONFIG_6xx */
-/* Definitions for 60x, 740/750, etc. */
-#define _PAGE_PRESENT 0x001 /* software: pte contains a translation */
-#define _PAGE_HASHPTE 0x002 /* hash_page has made an HPTE for this pte */
-#define _PAGE_FILE 0x004 /* when !present: nonlinear file mapping */
-#define _PAGE_USER 0x004 /* usermode access allowed */
-#define _PAGE_GUARDED 0x008 /* G: prohibit speculative access */
-#define _PAGE_COHERENT 0x010 /* M: enforce memory coherence (SMP systems) */
-#define _PAGE_NO_CACHE 0x020 /* I: cache inhibit */
-#define _PAGE_WRITETHRU 0x040 /* W: cache write-through */
-#define _PAGE_DIRTY 0x080 /* C: page changed */
-#define _PAGE_ACCESSED 0x100 /* R: page referenced */
-#define _PAGE_EXEC 0x200 /* software: i-cache coherency required */
-#define _PAGE_RW 0x400 /* software: user write access allowed */
-#define _PAGE_SPECIAL 0x800 /* software: Special page */
-
-#ifdef CONFIG_PTE_64BIT
-/* We never clear the high word of the pte */
-#define _PTE_NONE_MASK (0xffffffff00000000ULL | _PAGE_HASHPTE)
-#else
-#define _PTE_NONE_MASK _PAGE_HASHPTE
+#include <asm/pte-hash32.h>
#endif
-#define _PMD_PRESENT 0
-#define _PMD_PRESENT_MASK (PAGE_MASK)
-#define _PMD_BAD (~PAGE_MASK)
-
-/* Hash table based platforms need atomic updates of the linux PTE */
-#define PTE_ATOMIC_UPDATES 1
-
-#define __HAVE_ARCH_PTE_SPECIAL
-
-#endif
-
-/*
- * Some bits are only used on some cpu families...
- */
-#ifndef _PAGE_HASHPTE
-#define _PAGE_HASHPTE 0
-#endif
-#ifndef _PTE_NONE_MASK
-#define _PTE_NONE_MASK 0
-#endif
-#ifndef _PAGE_SHARED
-#define _PAGE_SHARED 0
-#endif
-#ifndef _PAGE_HWWRITE
-#define _PAGE_HWWRITE 0
-#endif
-#ifndef _PAGE_HWEXEC
-#define _PAGE_HWEXEC 0
-#endif
-#ifndef _PAGE_EXEC
-#define _PAGE_EXEC 0
-#endif
-#ifndef _PAGE_ENDIAN
-#define _PAGE_ENDIAN 0
-#endif
-#ifndef _PAGE_COHERENT
-#define _PAGE_COHERENT 0
-#endif
-#ifndef _PAGE_WRITETHRU
-#define _PAGE_WRITETHRU 0
-#endif
-#ifndef _PAGE_SPECIAL
-#define _PAGE_SPECIAL 0
-#endif
-#ifndef _PMD_PRESENT_MASK
-#define _PMD_PRESENT_MASK _PMD_PRESENT
-#endif
-#ifndef _PMD_SIZE
-#define _PMD_SIZE 0
-#define PMD_PAGE_SIZE(pmd) bad_call_to_PMD_PAGE_SIZE()
-#endif
-
-#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | \
- _PAGE_SPECIAL)
-
-
-#define PAGE_PROT_BITS (_PAGE_GUARDED | _PAGE_COHERENT | _PAGE_NO_CACHE | \
- _PAGE_WRITETHRU | _PAGE_ENDIAN | \
- _PAGE_USER | _PAGE_ACCESSED | \
- _PAGE_RW | _PAGE_HWWRITE | _PAGE_DIRTY | \
- _PAGE_EXEC | _PAGE_HWEXEC)
-
-/*
- * We define 2 sets of base prot bits, one for basic pages (ie,
- * cacheable kernel and user pages) and one for non cacheable
- * pages. We always set _PAGE_COHERENT when SMP is enabled or
- * the processor might need it for DMA coherency.
- */
-#if defined(CONFIG_SMP) || defined(CONFIG_PPC_STD_MMU)
-#define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_COHERENT)
-#else
-#define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED)
-#endif
-#define _PAGE_BASE_NC (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_NO_CACHE)
-
-#define _PAGE_WRENABLE (_PAGE_RW | _PAGE_DIRTY | _PAGE_HWWRITE)
-#define _PAGE_KERNEL (_PAGE_BASE | _PAGE_SHARED | _PAGE_WRENABLE)
-#define _PAGE_KERNEL_NC (_PAGE_BASE_NC | _PAGE_SHARED | _PAGE_WRENABLE)
-
-#ifdef CONFIG_PPC_STD_MMU
-/* On standard PPC MMU, no user access implies kernel read/write access,
- * so to write-protect kernel memory we must turn on user access */
-#define _PAGE_KERNEL_RO (_PAGE_BASE | _PAGE_SHARED | _PAGE_USER)
-#else
-#define _PAGE_KERNEL_RO (_PAGE_BASE | _PAGE_SHARED)
-#endif
-
-#define _PAGE_IO (_PAGE_KERNEL_NC | _PAGE_GUARDED)
-#define _PAGE_RAM (_PAGE_KERNEL | _PAGE_HWEXEC)
-
-#if defined(CONFIG_KGDB) || defined(CONFIG_XMON) || defined(CONFIG_BDI_SWITCH) ||\
- defined(CONFIG_KPROBES)
-/* We want the debuggers to be able to set breakpoints anywhere, so
- * don't write protect the kernel text */
-#define _PAGE_RAM_TEXT _PAGE_RAM
-#else
-#define _PAGE_RAM_TEXT (_PAGE_KERNEL_RO | _PAGE_HWEXEC)
-#endif
-
-#define PAGE_NONE __pgprot(_PAGE_BASE)
-#define PAGE_READONLY __pgprot(_PAGE_BASE | _PAGE_USER)
-#define PAGE_READONLY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
-#define PAGE_SHARED __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW)
-#define PAGE_SHARED_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW | _PAGE_EXEC)
-#define PAGE_COPY __pgprot(_PAGE_BASE | _PAGE_USER)
-#define PAGE_COPY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
-
-#define PAGE_KERNEL __pgprot(_PAGE_RAM)
-#define PAGE_KERNEL_NOCACHE __pgprot(_PAGE_IO)
-
-/*
- * The PowerPC can only do execute protection on a segment (256MB) basis,
- * not on a page basis. So we consider execute permission the same as read.
- * Also, write permissions imply read permissions.
- * This is the closest we can get..
- */
-#define __P000 PAGE_NONE
-#define __P001 PAGE_READONLY_X
-#define __P010 PAGE_COPY
-#define __P011 PAGE_COPY_X
-#define __P100 PAGE_READONLY
-#define __P101 PAGE_READONLY_X
-#define __P110 PAGE_COPY
-#define __P111 PAGE_COPY_X
-
-#define __S000 PAGE_NONE
-#define __S001 PAGE_READONLY_X
-#define __S010 PAGE_SHARED
-#define __S011 PAGE_SHARED_X
-#define __S100 PAGE_READONLY
-#define __S101 PAGE_READONLY_X
-#define __S110 PAGE_SHARED
-#define __S111 PAGE_SHARED_X
+/* And here we include common definitions */
+#include <asm/pte-common.h>
#ifndef __ASSEMBLY__
-/* Make sure we get a link error if PMD_PAGE_SIZE is ever called on a
- * kernel without large page PMD support */
-extern unsigned long bad_call_to_PMD_PAGE_SIZE(void);
-
-/*
- * Conversions between PTE values and page frame numbers.
- */
-
-/* in some case we want to additionaly adjust where the pfn is in the pte to
- * allow room for more flags */
-#if defined(CONFIG_FSL_BOOKE) && defined(CONFIG_PTE_64BIT)
-#define PFN_SHIFT_OFFSET (PAGE_SHIFT + 8)
-#else
-#define PFN_SHIFT_OFFSET (PAGE_SHIFT)
-#endif
-#define pte_pfn(x) (pte_val(x) >> PFN_SHIFT_OFFSET)
-#define pte_page(x) pfn_to_page(pte_pfn(x))
-
-#define pfn_pte(pfn, prot) __pte(((pte_basic_t)(pfn) << PFN_SHIFT_OFFSET) |\
- pgprot_val(prot))
-#define mk_pte(page, prot) pfn_pte(page_to_pfn(page), prot)
-#endif /* __ASSEMBLY__ */
-
-#define pte_none(pte) ((pte_val(pte) & ~_PTE_NONE_MASK) == 0)
-#define pte_present(pte) (pte_val(pte) & _PAGE_PRESENT)
#define pte_clear(mm, addr, ptep) \
do { pte_update(ptep, ~_PAGE_HASHPTE, 0); } while (0)
@@ -546,43 +110,6 @@ extern unsigned long bad_call_to_PMD_PAGE_SIZE(void);
#define pmd_present(pmd) (pmd_val(pmd) & _PMD_PRESENT_MASK)
#define pmd_clear(pmdp) do { pmd_val(*(pmdp)) = 0; } while (0)
-#ifndef __ASSEMBLY__
-/*
- * The following only work if pte_present() is true.
- * Undefined behaviour if not..
- */
-static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_RW; }
-static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; }
-static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; }
-static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; }
-static inline int pte_special(pte_t pte) { return pte_val(pte) & _PAGE_SPECIAL; }
-
-static inline pte_t pte_wrprotect(pte_t pte) {
- pte_val(pte) &= ~(_PAGE_RW | _PAGE_HWWRITE); return pte; }
-static inline pte_t pte_mkclean(pte_t pte) {
- pte_val(pte) &= ~(_PAGE_DIRTY | _PAGE_HWWRITE); return pte; }
-static inline pte_t pte_mkold(pte_t pte) {
- pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
-
-static inline pte_t pte_mkwrite(pte_t pte) {
- pte_val(pte) |= _PAGE_RW; return pte; }
-static inline pte_t pte_mkdirty(pte_t pte) {
- pte_val(pte) |= _PAGE_DIRTY; return pte; }
-static inline pte_t pte_mkyoung(pte_t pte) {
- pte_val(pte) |= _PAGE_ACCESSED; return pte; }
-static inline pte_t pte_mkspecial(pte_t pte) {
- pte_val(pte) |= _PAGE_SPECIAL; return pte; }
-static inline pgprot_t pte_pgprot(pte_t pte)
-{
- return __pgprot(pte_val(pte) & PAGE_PROT_BITS);
-}
-
-static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
-{
- pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot);
- return pte;
-}
-
/*
* When flushing the tlb entry for a page, we also need to flush the hash
* table entry. flush_hash_pages is assembler (for speed) in hashtable.S.
@@ -599,11 +126,19 @@ extern void flush_hash_entry(struct mm_struct *mm, pte_t *ptep,
unsigned long address);
/*
- * Atomic PTE updates.
+ * PTE updates. This function is called whenever an existing
+ * valid PTE is updated. This does -not- include set_pte_at()
+ * which nowadays only sets a new PTE.
*
- * pte_update clears and sets bit atomically, and returns
- * the old pte value. In the 64-bit PTE case we lock around the
- * low PTE word since we expect ALL flag bits to be there
+ * Depending on the type of MMU, we may need to use atomic updates
+ * and the PTE may be either 32 or 64 bit wide. In the later case,
+ * when using atomic updates, only the low part of the PTE is
+ * accessed atomically.
+ *
+ * In addition, on 44x, we also maintain a global flag indicating
+ * that an executable user mapping was modified, which is needed
+ * to properly flush the virtually tagged instruction cache of
+ * those implementations.
*/
#ifndef CONFIG_PTE_64BIT
static inline unsigned long pte_update(pte_t *p,
@@ -668,44 +203,6 @@ static inline unsigned long long pte_update(pte_t *p,
#endif /* CONFIG_PTE_64BIT */
/*
- * set_pte stores a linux PTE into the linux page table.
- * On machines which use an MMU hash table we avoid changing the
- * _PAGE_HASHPTE bit.
- */
-
-static inline void __set_pte_at(struct mm_struct *mm, unsigned long addr,
- pte_t *ptep, pte_t pte)
-{
-#if (_PAGE_HASHPTE != 0) && defined(CONFIG_SMP) && !defined(CONFIG_PTE_64BIT)
- pte_update(ptep, ~_PAGE_HASHPTE, pte_val(pte) & ~_PAGE_HASHPTE);
-#elif defined(CONFIG_PTE_64BIT) && defined(CONFIG_SMP)
-#if _PAGE_HASHPTE != 0
- if (pte_val(*ptep) & _PAGE_HASHPTE)
- flush_hash_entry(mm, ptep, addr);
-#endif
- __asm__ __volatile__("\
- stw%U0%X0 %2,%0\n\
- eieio\n\
- stw%U0%X0 %L2,%1"
- : "=m" (*ptep), "=m" (*((unsigned char *)ptep+4))
- : "r" (pte) : "memory");
-#else
- *ptep = __pte((pte_val(*ptep) & _PAGE_HASHPTE)
- | (pte_val(pte) & ~_PAGE_HASHPTE));
-#endif
-}
-
-
-static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
- pte_t *ptep, pte_t pte)
-{
-#if defined(CONFIG_PTE_64BIT) && defined(CONFIG_SMP) && defined(CONFIG_DEBUG_VM)
- WARN_ON(pte_present(*ptep));
-#endif
- __set_pte_at(mm, addr, ptep, pte);
-}
-
-/*
* 2.6 calls this without flushing the TLB entry; this is wrong
* for our hash-based implementation, we fix that up here.
*/
@@ -745,24 +242,14 @@ static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
}
-#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
-static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry, int dirty)
+static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry)
{
unsigned long bits = pte_val(entry) &
- (_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW);
+ (_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW |
+ _PAGE_HWEXEC | _PAGE_EXEC);
pte_update(ptep, 0, bits);
}
-#define ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \
-({ \
- int __changed = !pte_same(*(__ptep), __entry); \
- if (__changed) { \
- __ptep_set_access_flags(__ptep, __entry, __dirty); \
- flush_tlb_page_nohash(__vma, __address); \
- } \
- __changed; \
-})
-
#define __HAVE_ARCH_PTE_SAME
#define pte_same(A,B) (((pte_val(A) ^ pte_val(B)) & ~_PAGE_HASHPTE) == 0)