summaryrefslogtreecommitdiff
path: root/arch/powerpc/kernel/head_44x.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/kernel/head_44x.S')
-rw-r--r--arch/powerpc/kernel/head_44x.S828
1 files changed, 656 insertions, 172 deletions
diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S
index 711368b993f2..5ab484ef06a7 100644
--- a/arch/powerpc/kernel/head_44x.S
+++ b/arch/powerpc/kernel/head_44x.S
@@ -37,6 +37,7 @@
#include <asm/thread_info.h>
#include <asm/ppc_asm.h>
#include <asm/asm-offsets.h>
+#include <asm/synch.h>
#include "head_booke.h"
@@ -69,165 +70,7 @@ _ENTRY(_start);
mr r27,r7
li r24,0 /* CPU number */
-/*
- * In case the firmware didn't do it, we apply some workarounds
- * that are good for all 440 core variants here
- */
- mfspr r3,SPRN_CCR0
- rlwinm r3,r3,0,0,27 /* disable icache prefetch */
- isync
- mtspr SPRN_CCR0,r3
- isync
- sync
-
-/*
- * Set up the initial MMU state
- *
- * We are still executing code at the virtual address
- * mappings set by the firmware for the base of RAM.
- *
- * We first invalidate all TLB entries but the one
- * we are running from. We then load the KERNELBASE
- * mappings so we can begin to use kernel addresses
- * natively and so the interrupt vector locations are
- * permanently pinned (necessary since Book E
- * implementations always have translation enabled).
- *
- * TODO: Use the known TLB entry we are running from to
- * determine which physical region we are located
- * in. This can be used to determine where in RAM
- * (on a shared CPU system) or PCI memory space
- * (on a DRAMless system) we are located.
- * For now, we assume a perfect world which means
- * we are located at the base of DRAM (physical 0).
- */
-
-/*
- * Search TLB for entry that we are currently using.
- * Invalidate all entries but the one we are using.
- */
- /* Load our current PID->MMUCR TID and MSR IS->MMUCR STS */
- mfspr r3,SPRN_PID /* Get PID */
- mfmsr r4 /* Get MSR */
- andi. r4,r4,MSR_IS@l /* TS=1? */
- beq wmmucr /* If not, leave STS=0 */
- oris r3,r3,PPC44x_MMUCR_STS@h /* Set STS=1 */
-wmmucr: mtspr SPRN_MMUCR,r3 /* Put MMUCR */
- sync
-
- bl invstr /* Find our address */
-invstr: mflr r5 /* Make it accessible */
- tlbsx r23,0,r5 /* Find entry we are in */
- li r4,0 /* Start at TLB entry 0 */
- li r3,0 /* Set PAGEID inval value */
-1: cmpw r23,r4 /* Is this our entry? */
- beq skpinv /* If so, skip the inval */
- tlbwe r3,r4,PPC44x_TLB_PAGEID /* If not, inval the entry */
-skpinv: addi r4,r4,1 /* Increment */
- cmpwi r4,64 /* Are we done? */
- bne 1b /* If not, repeat */
- isync /* If so, context change */
-
-/*
- * Configure and load pinned entry into TLB slot 63.
- */
-
- lis r3,PAGE_OFFSET@h
- ori r3,r3,PAGE_OFFSET@l
-
- /* Kernel is at the base of RAM */
- li r4, 0 /* Load the kernel physical address */
-
- /* Load the kernel PID = 0 */
- li r0,0
- mtspr SPRN_PID,r0
- sync
-
- /* Initialize MMUCR */
- li r5,0
- mtspr SPRN_MMUCR,r5
- sync
-
- /* pageid fields */
- clrrwi r3,r3,10 /* Mask off the effective page number */
- ori r3,r3,PPC44x_TLB_VALID | PPC44x_TLB_256M
-
- /* xlat fields */
- clrrwi r4,r4,10 /* Mask off the real page number */
- /* ERPN is 0 for first 4GB page */
-
- /* attrib fields */
- /* Added guarded bit to protect against speculative loads/stores */
- li r5,0
- ori r5,r5,(PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G)
-
- li r0,63 /* TLB slot 63 */
-
- tlbwe r3,r0,PPC44x_TLB_PAGEID /* Load the pageid fields */
- tlbwe r4,r0,PPC44x_TLB_XLAT /* Load the translation fields */
- tlbwe r5,r0,PPC44x_TLB_ATTRIB /* Load the attrib/access fields */
-
- /* Force context change */
- mfmsr r0
- mtspr SPRN_SRR1, r0
- lis r0,3f@h
- ori r0,r0,3f@l
- mtspr SPRN_SRR0,r0
- sync
- rfi
-
- /* If necessary, invalidate original entry we used */
-3: cmpwi r23,63
- beq 4f
- li r6,0
- tlbwe r6,r23,PPC44x_TLB_PAGEID
- isync
-
-4:
-#ifdef CONFIG_PPC_EARLY_DEBUG_44x
- /* Add UART mapping for early debug. */
-
- /* pageid fields */
- lis r3,PPC44x_EARLY_DEBUG_VIRTADDR@h
- ori r3,r3,PPC44x_TLB_VALID|PPC44x_TLB_TS|PPC44x_TLB_64K
-
- /* xlat fields */
- lis r4,CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW@h
- ori r4,r4,CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH
-
- /* attrib fields */
- li r5,(PPC44x_TLB_SW|PPC44x_TLB_SR|PPC44x_TLB_I|PPC44x_TLB_G)
- li r0,62 /* TLB slot 0 */
-
- tlbwe r3,r0,PPC44x_TLB_PAGEID
- tlbwe r4,r0,PPC44x_TLB_XLAT
- tlbwe r5,r0,PPC44x_TLB_ATTRIB
-
- /* Force context change */
- isync
-#endif /* CONFIG_PPC_EARLY_DEBUG_44x */
-
- /* Establish the interrupt vector offsets */
- SET_IVOR(0, CriticalInput);
- SET_IVOR(1, MachineCheck);
- SET_IVOR(2, DataStorage);
- SET_IVOR(3, InstructionStorage);
- SET_IVOR(4, ExternalInput);
- SET_IVOR(5, Alignment);
- SET_IVOR(6, Program);
- SET_IVOR(7, FloatingPointUnavailable);
- SET_IVOR(8, SystemCall);
- SET_IVOR(9, AuxillaryProcessorUnavailable);
- SET_IVOR(10, Decrementer);
- SET_IVOR(11, FixedIntervalTimer);
- SET_IVOR(12, WatchdogTimer);
- SET_IVOR(13, DataTLBError);
- SET_IVOR(14, InstructionTLBError);
- SET_IVOR(15, DebugCrit);
-
- /* Establish the interrupt vector base */
- lis r4,interrupt_base@h /* IVPR only uses the high 16-bits */
- mtspr SPRN_IVPR,r4
+ bl init_cpu_state
/*
* This is where the main kernel code starts.
@@ -349,7 +192,7 @@ interrupt_base:
#endif
/* Data TLB Error Interrupt */
- START_EXCEPTION(DataTLBError)
+ START_EXCEPTION(DataTLBError44x)
mtspr SPRN_SPRG_WSCRATCH0, r10 /* Save some working registers */
mtspr SPRN_SPRG_WSCRATCH1, r11
mtspr SPRN_SPRG_WSCRATCH2, r12
@@ -440,7 +283,7 @@ tlb_44x_patch_hwater_D:
mfspr r10,SPRN_DEAR
/* Jump to common tlb load */
- b finish_tlb_load
+ b finish_tlb_load_44x
2:
/* The bailout. Restore registers to pre-exception conditions
@@ -460,7 +303,7 @@ tlb_44x_patch_hwater_D:
* information from different registers and bailout
* to a different point.
*/
- START_EXCEPTION(InstructionTLBError)
+ START_EXCEPTION(InstructionTLBError44x)
mtspr SPRN_SPRG_WSCRATCH0, r10 /* Save some working registers */
mtspr SPRN_SPRG_WSCRATCH1, r11
mtspr SPRN_SPRG_WSCRATCH2, r12
@@ -536,7 +379,7 @@ tlb_44x_patch_hwater_I:
mfspr r10,SPRN_SRR0
/* Jump to common TLB load point */
- b finish_tlb_load
+ b finish_tlb_load_44x
2:
/* The bailout. Restore registers to pre-exception conditions
@@ -550,15 +393,7 @@ tlb_44x_patch_hwater_I:
mfspr r10, SPRN_SPRG_RSCRATCH0
b InstructionStorage
- /* Debug Interrupt */
- DEBUG_CRIT_EXCEPTION
-
-/*
- * Local functions
- */
-
/*
-
* Both the instruction and data TLB miss get to this
* point to load the TLB.
* r10 - EA of fault
@@ -568,7 +403,7 @@ tlb_44x_patch_hwater_I:
* MMUCR - loaded with proper value when we get here
* Upon exit, we reload everything and RFI.
*/
-finish_tlb_load:
+finish_tlb_load_44x:
/* Combine RPN & ERPN an write WS 0 */
rlwimi r11,r12,0,0,31-PAGE_SHIFT
tlbwe r11,r13,PPC44x_TLB_XLAT
@@ -601,6 +436,227 @@ finish_tlb_load:
mfspr r10, SPRN_SPRG_RSCRATCH0
rfi /* Force context change */
+/* TLB error interrupts for 476
+ */
+#ifdef CONFIG_PPC_47x
+ START_EXCEPTION(DataTLBError47x)
+ mtspr SPRN_SPRG_WSCRATCH0,r10 /* Save some working registers */
+ mtspr SPRN_SPRG_WSCRATCH1,r11
+ mtspr SPRN_SPRG_WSCRATCH2,r12
+ mtspr SPRN_SPRG_WSCRATCH3,r13
+ mfcr r11
+ mtspr SPRN_SPRG_WSCRATCH4,r11
+ mfspr r10,SPRN_DEAR /* Get faulting address */
+
+ /* If we are faulting a kernel address, we have to use the
+ * kernel page tables.
+ */
+ lis r11,PAGE_OFFSET@h
+ cmplw cr0,r10,r11
+ blt+ 3f
+ lis r11,swapper_pg_dir@h
+ ori r11,r11, swapper_pg_dir@l
+ li r12,0 /* MMUCR = 0 */
+ b 4f
+
+ /* Get the PGD for the current thread and setup MMUCR */
+3: mfspr r11,SPRN_SPRG3
+ lwz r11,PGDIR(r11)
+ mfspr r12,SPRN_PID /* Get PID */
+4: mtspr SPRN_MMUCR,r12 /* Set MMUCR */
+
+ /* Mask of required permission bits. Note that while we
+ * do copy ESR:ST to _PAGE_RW position as trying to write
+ * to an RO page is pretty common, we don't do it with
+ * _PAGE_DIRTY. We could do it, but it's a fairly rare
+ * event so I'd rather take the overhead when it happens
+ * rather than adding an instruction here. We should measure
+ * whether the whole thing is worth it in the first place
+ * as we could avoid loading SPRN_ESR completely in the first
+ * place...
+ *
+ * TODO: Is it worth doing that mfspr & rlwimi in the first
+ * place or can we save a couple of instructions here ?
+ */
+ mfspr r12,SPRN_ESR
+ li r13,_PAGE_PRESENT|_PAGE_ACCESSED
+ rlwimi r13,r12,10,30,30
+
+ /* Load the PTE */
+ /* Compute pgdir/pmd offset */
+ rlwinm r12,r10,PPC44x_PGD_OFF_SHIFT,PPC44x_PGD_OFF_MASK_BIT,29
+ lwzx r11,r12,r11 /* Get pgd/pmd entry */
+
+ /* Word 0 is EPN,V,TS,DSIZ */
+ li r12,PPC47x_TLB0_VALID | PPC47x_TLBE_SIZE
+ rlwimi r10,r12,0,32-PAGE_SHIFT,31 /* Insert valid and page size*/
+ li r12,0
+ tlbwe r10,r12,0
+
+ /* XXX can we do better ? Need to make sure tlbwe has established
+ * latch V bit in MMUCR0 before the PTE is loaded further down */
+#ifdef CONFIG_SMP
+ isync
+#endif
+
+ rlwinm. r12,r11,0,0,20 /* Extract pt base address */
+ /* Compute pte address */
+ rlwimi r12,r10,PPC44x_PTE_ADD_SHIFT,PPC44x_PTE_ADD_MASK_BIT,28
+ beq 2f /* Bail if no table */
+ lwz r11,0(r12) /* Get high word of pte entry */
+
+ /* XXX can we do better ? maybe insert a known 0 bit from r11 into the
+ * bottom of r12 to create a data dependency... We can also use r10
+ * as destination nowadays
+ */
+#ifdef CONFIG_SMP
+ lwsync
+#endif
+ lwz r12,4(r12) /* Get low word of pte entry */
+
+ andc. r13,r13,r12 /* Check permission */
+
+ /* Jump to common tlb load */
+ beq finish_tlb_load_47x
+
+2: /* The bailout. Restore registers to pre-exception conditions
+ * and call the heavyweights to help us out.
+ */
+ mfspr r11,SPRN_SPRG_RSCRATCH4
+ mtcr r11
+ mfspr r13,SPRN_SPRG_RSCRATCH3
+ mfspr r12,SPRN_SPRG_RSCRATCH2
+ mfspr r11,SPRN_SPRG_RSCRATCH1
+ mfspr r10,SPRN_SPRG_RSCRATCH0
+ b DataStorage
+
+ /* Instruction TLB Error Interrupt */
+ /*
+ * Nearly the same as above, except we get our
+ * information from different registers and bailout
+ * to a different point.
+ */
+ START_EXCEPTION(InstructionTLBError47x)
+ mtspr SPRN_SPRG_WSCRATCH0,r10 /* Save some working registers */
+ mtspr SPRN_SPRG_WSCRATCH1,r11
+ mtspr SPRN_SPRG_WSCRATCH2,r12
+ mtspr SPRN_SPRG_WSCRATCH3,r13
+ mfcr r11
+ mtspr SPRN_SPRG_WSCRATCH4,r11
+ mfspr r10,SPRN_SRR0 /* Get faulting address */
+
+ /* If we are faulting a kernel address, we have to use the
+ * kernel page tables.
+ */
+ lis r11,PAGE_OFFSET@h
+ cmplw cr0,r10,r11
+ blt+ 3f
+ lis r11,swapper_pg_dir@h
+ ori r11,r11, swapper_pg_dir@l
+ li r12,0 /* MMUCR = 0 */
+ b 4f
+
+ /* Get the PGD for the current thread and setup MMUCR */
+3: mfspr r11,SPRN_SPRG_THREAD
+ lwz r11,PGDIR(r11)
+ mfspr r12,SPRN_PID /* Get PID */
+4: mtspr SPRN_MMUCR,r12 /* Set MMUCR */
+
+ /* Make up the required permissions */
+ li r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC
+
+ /* Load PTE */
+ /* Compute pgdir/pmd offset */
+ rlwinm r12,r10,PPC44x_PGD_OFF_SHIFT,PPC44x_PGD_OFF_MASK_BIT,29
+ lwzx r11,r12,r11 /* Get pgd/pmd entry */
+
+ /* Word 0 is EPN,V,TS,DSIZ */
+ li r12,PPC47x_TLB0_VALID | PPC47x_TLBE_SIZE
+ rlwimi r10,r12,0,32-PAGE_SHIFT,31 /* Insert valid and page size*/
+ li r12,0
+ tlbwe r10,r12,0
+
+ /* XXX can we do better ? Need to make sure tlbwe has established
+ * latch V bit in MMUCR0 before the PTE is loaded further down */
+#ifdef CONFIG_SMP
+ isync
+#endif
+
+ rlwinm. r12,r11,0,0,20 /* Extract pt base address */
+ /* Compute pte address */
+ rlwimi r12,r10,PPC44x_PTE_ADD_SHIFT,PPC44x_PTE_ADD_MASK_BIT,28
+ beq 2f /* Bail if no table */
+
+ lwz r11,0(r12) /* Get high word of pte entry */
+ /* XXX can we do better ? maybe insert a known 0 bit from r11 into the
+ * bottom of r12 to create a data dependency... We can also use r10
+ * as destination nowadays
+ */
+#ifdef CONFIG_SMP
+ lwsync
+#endif
+ lwz r12,4(r12) /* Get low word of pte entry */
+
+ andc. r13,r13,r12 /* Check permission */
+
+ /* Jump to common TLB load point */
+ beq finish_tlb_load_47x
+
+2: /* The bailout. Restore registers to pre-exception conditions
+ * and call the heavyweights to help us out.
+ */
+ mfspr r11, SPRN_SPRG_RSCRATCH4
+ mtcr r11
+ mfspr r13, SPRN_SPRG_RSCRATCH3
+ mfspr r12, SPRN_SPRG_RSCRATCH2
+ mfspr r11, SPRN_SPRG_RSCRATCH1
+ mfspr r10, SPRN_SPRG_RSCRATCH0
+ b InstructionStorage
+
+/*
+ * Both the instruction and data TLB miss get to this
+ * point to load the TLB.
+ * r10 - free to use
+ * r11 - PTE high word value
+ * r12 - PTE low word value
+ * r13 - free to use
+ * MMUCR - loaded with proper value when we get here
+ * Upon exit, we reload everything and RFI.
+ */
+finish_tlb_load_47x:
+ /* Combine RPN & ERPN an write WS 1 */
+ rlwimi r11,r12,0,0,31-PAGE_SHIFT
+ tlbwe r11,r13,1
+
+ /* And make up word 2 */
+ li r10,0xf85 /* Mask to apply from PTE */
+ rlwimi r10,r12,29,30,30 /* DIRTY -> SW position */
+ and r11,r12,r10 /* Mask PTE bits to keep */
+ andi. r10,r12,_PAGE_USER /* User page ? */
+ beq 1f /* nope, leave U bits empty */
+ rlwimi r11,r11,3,26,28 /* yes, copy S bits to U */
+1: tlbwe r11,r13,2
+
+ /* Done...restore registers and get out of here.
+ */
+ mfspr r11, SPRN_SPRG_RSCRATCH4
+ mtcr r11
+ mfspr r13, SPRN_SPRG_RSCRATCH3
+ mfspr r12, SPRN_SPRG_RSCRATCH2
+ mfspr r11, SPRN_SPRG_RSCRATCH1
+ mfspr r10, SPRN_SPRG_RSCRATCH0
+ rfi
+
+#endif /* CONFIG_PPC_47x */
+
+ /* Debug Interrupt */
+ /*
+ * This statement needs to exist at the end of the IVPR
+ * definition just in case you end up taking a debug
+ * exception within another exception.
+ */
+ DEBUG_CRIT_EXCEPTION
+
/*
* Global functions
*/
@@ -647,6 +703,428 @@ _GLOBAL(set_context)
blr
/*
+ * Init CPU state. This is called at boot time or for secondary CPUs
+ * to setup initial TLB entries, setup IVORs, etc...
+ *
+ */
+_GLOBAL(init_cpu_state)
+ mflr r22
+#ifdef CONFIG_PPC_47x
+ /* We use the PVR to differenciate 44x cores from 476 */
+ mfspr r3,SPRN_PVR
+ srwi r3,r3,16
+ cmplwi cr0,r3,PVR_476@h
+ beq head_start_47x
+ cmplwi cr0,r3,PVR_476_ISS@h
+ beq head_start_47x
+#endif /* CONFIG_PPC_47x */
+
+/*
+ * In case the firmware didn't do it, we apply some workarounds
+ * that are good for all 440 core variants here
+ */
+ mfspr r3,SPRN_CCR0
+ rlwinm r3,r3,0,0,27 /* disable icache prefetch */
+ isync
+ mtspr SPRN_CCR0,r3
+ isync
+ sync
+
+/*
+ * Set up the initial MMU state for 44x
+ *
+ * We are still executing code at the virtual address
+ * mappings set by the firmware for the base of RAM.
+ *
+ * We first invalidate all TLB entries but the one
+ * we are running from. We then load the KERNELBASE
+ * mappings so we can begin to use kernel addresses
+ * natively and so the interrupt vector locations are
+ * permanently pinned (necessary since Book E
+ * implementations always have translation enabled).
+ *
+ * TODO: Use the known TLB entry we are running from to
+ * determine which physical region we are located
+ * in. This can be used to determine where in RAM
+ * (on a shared CPU system) or PCI memory space
+ * (on a DRAMless system) we are located.
+ * For now, we assume a perfect world which means
+ * we are located at the base of DRAM (physical 0).
+ */
+
+/*
+ * Search TLB for entry that we are currently using.
+ * Invalidate all entries but the one we are using.
+ */
+ /* Load our current PID->MMUCR TID and MSR IS->MMUCR STS */
+ mfspr r3,SPRN_PID /* Get PID */
+ mfmsr r4 /* Get MSR */
+ andi. r4,r4,MSR_IS@l /* TS=1? */
+ beq wmmucr /* If not, leave STS=0 */
+ oris r3,r3,PPC44x_MMUCR_STS@h /* Set STS=1 */
+wmmucr: mtspr SPRN_MMUCR,r3 /* Put MMUCR */
+ sync
+
+ bl invstr /* Find our address */
+invstr: mflr r5 /* Make it accessible */
+ tlbsx r23,0,r5 /* Find entry we are in */
+ li r4,0 /* Start at TLB entry 0 */
+ li r3,0 /* Set PAGEID inval value */
+1: cmpw r23,r4 /* Is this our entry? */
+ beq skpinv /* If so, skip the inval */
+ tlbwe r3,r4,PPC44x_TLB_PAGEID /* If not, inval the entry */
+skpinv: addi r4,r4,1 /* Increment */
+ cmpwi r4,64 /* Are we done? */
+ bne 1b /* If not, repeat */
+ isync /* If so, context change */
+
+/*
+ * Configure and load pinned entry into TLB slot 63.
+ */
+
+ lis r3,PAGE_OFFSET@h
+ ori r3,r3,PAGE_OFFSET@l
+
+ /* Kernel is at the base of RAM */
+ li r4, 0 /* Load the kernel physical address */
+
+ /* Load the kernel PID = 0 */
+ li r0,0
+ mtspr SPRN_PID,r0
+ sync
+
+ /* Initialize MMUCR */
+ li r5,0
+ mtspr SPRN_MMUCR,r5
+ sync
+
+ /* pageid fields */
+ clrrwi r3,r3,10 /* Mask off the effective page number */
+ ori r3,r3,PPC44x_TLB_VALID | PPC44x_TLB_256M
+
+ /* xlat fields */
+ clrrwi r4,r4,10 /* Mask off the real page number */
+ /* ERPN is 0 for first 4GB page */
+
+ /* attrib fields */
+ /* Added guarded bit to protect against speculative loads/stores */
+ li r5,0
+ ori r5,r5,(PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G)
+
+ li r0,63 /* TLB slot 63 */
+
+ tlbwe r3,r0,PPC44x_TLB_PAGEID /* Load the pageid fields */
+ tlbwe r4,r0,PPC44x_TLB_XLAT /* Load the translation fields */
+ tlbwe r5,r0,PPC44x_TLB_ATTRIB /* Load the attrib/access fields */
+
+ /* Force context change */
+ mfmsr r0
+ mtspr SPRN_SRR1, r0
+ lis r0,3f@h
+ ori r0,r0,3f@l
+ mtspr SPRN_SRR0,r0
+ sync
+ rfi
+
+ /* If necessary, invalidate original entry we used */
+3: cmpwi r23,63
+ beq 4f
+ li r6,0
+ tlbwe r6,r23,PPC44x_TLB_PAGEID
+ isync
+
+4:
+#ifdef CONFIG_PPC_EARLY_DEBUG_44x
+ /* Add UART mapping for early debug. */
+
+ /* pageid fields */
+ lis r3,PPC44x_EARLY_DEBUG_VIRTADDR@h
+ ori r3,r3,PPC44x_TLB_VALID|PPC44x_TLB_TS|PPC44x_TLB_64K
+
+ /* xlat fields */
+ lis r4,CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW@h
+ ori r4,r4,CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH
+
+ /* attrib fields */
+ li r5,(PPC44x_TLB_SW|PPC44x_TLB_SR|PPC44x_TLB_I|PPC44x_TLB_G)
+ li r0,62 /* TLB slot 0 */
+
+ tlbwe r3,r0,PPC44x_TLB_PAGEID
+ tlbwe r4,r0,PPC44x_TLB_XLAT
+ tlbwe r5,r0,PPC44x_TLB_ATTRIB
+
+ /* Force context change */
+ isync
+#endif /* CONFIG_PPC_EARLY_DEBUG_44x */
+
+ /* Establish the interrupt vector offsets */
+ SET_IVOR(0, CriticalInput);
+ SET_IVOR(1, MachineCheck);
+ SET_IVOR(2, DataStorage);
+ SET_IVOR(3, InstructionStorage);
+ SET_IVOR(4, ExternalInput);
+ SET_IVOR(5, Alignment);
+ SET_IVOR(6, Program);
+ SET_IVOR(7, FloatingPointUnavailable);
+ SET_IVOR(8, SystemCall);
+ SET_IVOR(9, AuxillaryProcessorUnavailable);
+ SET_IVOR(10, Decrementer);
+ SET_IVOR(11, FixedIntervalTimer);
+ SET_IVOR(12, WatchdogTimer);
+ SET_IVOR(13, DataTLBError44x);
+ SET_IVOR(14, InstructionTLBError44x);
+ SET_IVOR(15, DebugCrit);
+
+ b head_start_common
+
+
+#ifdef CONFIG_PPC_47x
+
+#ifdef CONFIG_SMP
+
+/* Entry point for secondary 47x processors */
+_GLOBAL(start_secondary_47x)
+ mr r24,r3 /* CPU number */
+
+ bl init_cpu_state
+
+ /* Now we need to bolt the rest of kernel memory which
+ * is done in C code. We must be careful because our task
+ * struct or our stack can (and will probably) be out
+ * of reach of the initial 256M TLB entry, so we use a
+ * small temporary stack in .bss for that. This works
+ * because only one CPU at a time can be in this code
+ */
+ lis r1,temp_boot_stack@h
+ ori r1,r1,temp_boot_stack@l
+ addi r1,r1,1024-STACK_FRAME_OVERHEAD
+ li r0,0
+ stw r0,0(r1)
+ bl mmu_init_secondary
+
+ /* Now we can get our task struct and real stack pointer */
+
+ /* Get current_thread_info and current */
+ lis r1,secondary_ti@ha
+ lwz r1,secondary_ti@l(r1)
+ lwz r2,TI_TASK(r1)
+
+ /* Current stack pointer */
+ addi r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD
+ li r0,0
+ stw r0,0(r1)
+
+ /* Kernel stack for exception entry in SPRG3 */
+ addi r4,r2,THREAD /* init task's THREAD */
+ mtspr SPRN_SPRG3,r4
+
+ b start_secondary
+
+#endif /* CONFIG_SMP */
+
+/*
+ * Set up the initial MMU state for 44x
+ *
+ * We are still executing code at the virtual address
+ * mappings set by the firmware for the base of RAM.
+ */
+
+head_start_47x:
+ /* Load our current PID->MMUCR TID and MSR IS->MMUCR STS */
+ mfspr r3,SPRN_PID /* Get PID */
+ mfmsr r4 /* Get MSR */
+ andi. r4,r4,MSR_IS@l /* TS=1? */
+ beq 1f /* If not, leave STS=0 */
+ oris r3,r3,PPC47x_MMUCR_STS@h /* Set STS=1 */
+1: mtspr SPRN_MMUCR,r3 /* Put MMUCR */
+ sync
+
+ /* Find the entry we are running from */
+ bl 1f
+1: mflr r23
+ tlbsx r23,0,r23
+ tlbre r24,r23,0
+ tlbre r25,r23,1
+ tlbre r26,r23,2
+
+/*
+ * Cleanup time
+ */
+
+ /* Initialize MMUCR */
+ li r5,0
+ mtspr SPRN_MMUCR,r5
+ sync
+
+clear_all_utlb_entries:
+
+ #; Set initial values.
+
+ addis r3,0,0x8000
+ addi r4,0,0
+ addi r5,0,0
+ b clear_utlb_entry
+
+ #; Align the loop to speed things up.
+
+ .align 6
+
+clear_utlb_entry:
+
+ tlbwe r4,r3,0
+ tlbwe r5,r3,1
+ tlbwe r5,r3,2
+ addis r3,r3,0x2000
+ cmpwi r3,0
+ bne clear_utlb_entry
+ addis r3,0,0x8000
+ addis r4,r4,0x100
+ cmpwi r4,0
+ bne clear_utlb_entry
+
+ #; Restore original entry.
+
+ oris r23,r23,0x8000 /* specify the way */
+ tlbwe r24,r23,0
+ tlbwe r25,r23,1
+ tlbwe r26,r23,2
+
+/*
+ * Configure and load pinned entry into TLB for the kernel core
+ */
+
+ lis r3,PAGE_OFFSET@h
+ ori r3,r3,PAGE_OFFSET@l
+
+ /* Kernel is at the base of RAM */
+ li r4, 0 /* Load the kernel physical address */
+
+ /* Load the kernel PID = 0 */
+ li r0,0
+ mtspr SPRN_PID,r0
+ sync
+
+ /* Word 0 */
+ clrrwi r3,r3,12 /* Mask off the effective page number */
+ ori r3,r3,PPC47x_TLB0_VALID | PPC47x_TLB0_256M
+
+ /* Word 1 */
+ clrrwi r4,r4,12 /* Mask off the real page number */
+ /* ERPN is 0 for first 4GB page */
+ /* Word 2 */
+ li r5,0
+ ori r5,r5,PPC47x_TLB2_S_RWX
+#ifdef CONFIG_SMP
+ ori r5,r5,PPC47x_TLB2_M
+#endif
+
+ /* We write to way 0 and bolted 0 */
+ lis r0,0x8800
+ tlbwe r3,r0,0
+ tlbwe r4,r0,1
+ tlbwe r5,r0,2
+
+/*
+ * Configure SSPCR, ISPCR and USPCR for now to search everything, we can fix
+ * them up later
+ */
+ LOAD_REG_IMMEDIATE(r3, 0x9abcdef0)
+ mtspr SPRN_SSPCR,r3
+ mtspr SPRN_USPCR,r3
+ LOAD_REG_IMMEDIATE(r3, 0x12345670)
+ mtspr SPRN_ISPCR,r3
+
+ /* Force context change */
+ mfmsr r0
+ mtspr SPRN_SRR1, r0
+ lis r0,3f@h
+ ori r0,r0,3f@l
+ mtspr SPRN_SRR0,r0
+ sync
+ rfi
+
+ /* Invalidate original entry we used */
+3:
+ rlwinm r24,r24,0,21,19 /* clear the "valid" bit */
+ tlbwe r24,r23,0
+ addi r24,0,0
+ tlbwe r24,r23,1
+ tlbwe r24,r23,2
+ isync /* Clear out the shadow TLB entries */
+
+#ifdef CONFIG_PPC_EARLY_DEBUG_44x
+ /* Add UART mapping for early debug. */
+
+ /* Word 0 */
+ lis r3,PPC44x_EARLY_DEBUG_VIRTADDR@h
+ ori r3,r3,PPC47x_TLB0_VALID | PPC47x_TLB0_TS | PPC47x_TLB0_1M
+
+ /* Word 1 */
+ lis r4,CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW@h
+ ori r4,r4,CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH
+
+ /* Word 2 */
+ li r5,(PPC47x_TLB2_S_RW | PPC47x_TLB2_IMG)
+
+ /* Bolted in way 0, bolt slot 5, we -hope- we don't hit the same
+ * congruence class as the kernel, we need to make sure of it at
+ * some point
+ */
+ lis r0,0x8d00
+ tlbwe r3,r0,0
+ tlbwe r4,r0,1
+ tlbwe r5,r0,2
+
+ /* Force context change */
+ isync
+#endif /* CONFIG_PPC_EARLY_DEBUG_44x */
+
+ /* Establish the interrupt vector offsets */
+ SET_IVOR(0, CriticalInput);
+ SET_IVOR(1, MachineCheckA);
+ SET_IVOR(2, DataStorage);
+ SET_IVOR(3, InstructionStorage);
+ SET_IVOR(4, ExternalInput);
+ SET_IVOR(5, Alignment);
+ SET_IVOR(6, Program);
+ SET_IVOR(7, FloatingPointUnavailable);
+ SET_IVOR(8, SystemCall);
+ SET_IVOR(9, AuxillaryProcessorUnavailable);
+ SET_IVOR(10, Decrementer);
+ SET_IVOR(11, FixedIntervalTimer);
+ SET_IVOR(12, WatchdogTimer);
+ SET_IVOR(13, DataTLBError47x);
+ SET_IVOR(14, InstructionTLBError47x);
+ SET_IVOR(15, DebugCrit);
+
+ /* We configure icbi to invalidate 128 bytes at a time since the
+ * current 32-bit kernel code isn't too happy with icache != dcache
+ * block size
+ */
+ mfspr r3,SPRN_CCR0
+ oris r3,r3,0x0020
+ mtspr SPRN_CCR0,r3
+ isync
+
+#endif /* CONFIG_PPC_47x */
+
+/*
+ * Here we are back to code that is common between 44x and 47x
+ *
+ * We proceed to further kernel initialization and return to the
+ * main kernel entry
+ */
+head_start_common:
+ /* Establish the interrupt vector base */
+ lis r4,interrupt_base@h /* IVPR only uses the high 16-bits */
+ mtspr SPRN_IVPR,r4
+
+ addis r22,r22,KERNELBASE@h
+ mtlr r22
+ isync
+ blr
+
+/*
* We put a few things here that have to be page-aligned. This stuff
* goes at the beginning of the data segment, which is page-aligned.
*/
@@ -671,3 +1149,9 @@ swapper_pg_dir:
*/
abatron_pteptrs:
.space 8
+
+#ifdef CONFIG_SMP
+ .align 12
+temp_boot_stack:
+ .space 1024
+#endif /* CONFIG_SMP */