summaryrefslogtreecommitdiff
path: root/arch/powerpc/platforms/44x/ppc476.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/platforms/44x/ppc476.c')
-rw-r--r--arch/powerpc/platforms/44x/ppc476.c299
1 files changed, 299 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/44x/ppc476.c b/arch/powerpc/platforms/44x/ppc476.c
new file mode 100644
index 000000000000..33986c1a05da
--- /dev/null
+++ b/arch/powerpc/platforms/44x/ppc476.c
@@ -0,0 +1,299 @@
+/*
+ * PowerPC 476FPE board specific routines
+ *
+ * Copyright © 2013 Tony Breeds IBM Corporation
+ * Copyright © 2013 Alistair Popple IBM Corporation
+ *
+ * Based on earlier code:
+ * Matt Porter <mporter@kernel.crashing.org>
+ * Copyright 2002-2005 MontaVista Software Inc.
+ *
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ * Copyright (c) 2003-2005 Zultys Technologies
+ *
+ * Rewritten and ported to the merged powerpc tree:
+ * Copyright 2007 David Gibson <dwg@au1.ibm.com>, IBM Corporation.
+ * Copyright © 2011 David Kliekamp IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/rtc.h>
+
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/time.h>
+#include <asm/uic.h>
+#include <asm/ppc4xx.h>
+#include <asm/mpic.h>
+#include <asm/mmu.h>
+
+#include <linux/pci.h>
+#include <linux/i2c.h>
+
+static struct of_device_id ppc47x_of_bus[] __initdata = {
+ { .compatible = "ibm,plb4", },
+ { .compatible = "ibm,plb6", },
+ { .compatible = "ibm,opb", },
+ { .compatible = "ibm,ebc", },
+ {},
+};
+
+/* The EEPROM is missing and the default values are bogus. This forces USB in
+ * to EHCI mode */
+static void quirk_ppc_currituck_usb_fixup(struct pci_dev *dev)
+{
+ if (of_machine_is_compatible("ibm,currituck")) {
+ pci_write_config_dword(dev, 0xe0, 0x0114231f);
+ pci_write_config_dword(dev, 0xe4, 0x00006c40);
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(0x1033, 0x0035, quirk_ppc_currituck_usb_fixup);
+
+/* Akebono has an AVR microcontroller attached to the I2C bus
+ * which is used to power off/reset the system. */
+
+/* AVR I2C Commands */
+#define AVR_PWRCTL_CMD (0x26)
+
+/* Flags for the power control I2C commands */
+#define AVR_PWRCTL_PWROFF (0x01)
+#define AVR_PWRCTL_RESET (0x02)
+
+static struct i2c_client *avr_i2c_client;
+static void avr_halt_system(int pwrctl_flags)
+{
+ /* Request the AVR to reset the system */
+ i2c_smbus_write_byte_data(avr_i2c_client,
+ AVR_PWRCTL_CMD, pwrctl_flags);
+
+ /* Wait for system to be reset */
+ while (1)
+ ;
+}
+
+static void avr_power_off_system(void)
+{
+ avr_halt_system(AVR_PWRCTL_PWROFF);
+}
+
+static void avr_reset_system(char *cmd)
+{
+ avr_halt_system(AVR_PWRCTL_RESET);
+}
+
+static int avr_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ avr_i2c_client = client;
+ ppc_md.restart = avr_reset_system;
+ ppc_md.power_off = avr_power_off_system;
+ return 0;
+}
+
+static const struct i2c_device_id avr_id[] = {
+ { "akebono-avr", 0 },
+ { }
+};
+
+static struct i2c_driver avr_driver = {
+ .driver = {
+ .name = "akebono-avr",
+ },
+ .probe = avr_probe,
+ .id_table = avr_id,
+};
+
+static int __init ppc47x_device_probe(void)
+{
+ i2c_add_driver(&avr_driver);
+ of_platform_bus_probe(NULL, ppc47x_of_bus, NULL);
+
+ return 0;
+}
+machine_device_initcall(ppc47x, ppc47x_device_probe);
+
+static void __init ppc47x_init_irq(void)
+{
+ struct device_node *np;
+
+ /* Find top level interrupt controller */
+ for_each_node_with_property(np, "interrupt-controller") {
+ if (of_get_property(np, "interrupts", NULL) == NULL)
+ break;
+ }
+ if (np == NULL)
+ panic("Can't find top level interrupt controller");
+
+ /* Check type and do appropriate initialization */
+ if (of_device_is_compatible(np, "chrp,open-pic")) {
+ /* The MPIC driver will get everything it needs from the
+ * device-tree, just pass 0 to all arguments
+ */
+ struct mpic *mpic =
+ mpic_alloc(np, 0, MPIC_NO_RESET, 0, 0, " MPIC ");
+ BUG_ON(mpic == NULL);
+ mpic_init(mpic);
+ ppc_md.get_irq = mpic_get_irq;
+ } else
+ panic("Unrecognized top level interrupt controller");
+}
+
+#ifdef CONFIG_SMP
+static void smp_ppc47x_setup_cpu(int cpu)
+{
+ mpic_setup_this_cpu();
+}
+
+static int smp_ppc47x_kick_cpu(int cpu)
+{
+ struct device_node *cpunode = of_get_cpu_node(cpu, NULL);
+ const u64 *spin_table_addr_prop;
+ u32 *spin_table;
+ extern void start_secondary_47x(void);
+
+ BUG_ON(cpunode == NULL);
+
+ /* Assume spin table. We could test for the enable-method in
+ * the device-tree but currently there's little point as it's
+ * our only supported method
+ */
+ spin_table_addr_prop =
+ of_get_property(cpunode, "cpu-release-addr", NULL);
+
+ if (spin_table_addr_prop == NULL) {
+ pr_err("CPU%d: Can't start, missing cpu-release-addr !\n",
+ cpu);
+ return 1;
+ }
+
+ /* Assume it's mapped as part of the linear mapping. This is a bit
+ * fishy but will work fine for now
+ *
+ * XXX: Is there any reason to assume differently?
+ */
+ spin_table = (u32 *)__va(*spin_table_addr_prop);
+ pr_debug("CPU%d: Spin table mapped at %p\n", cpu, spin_table);
+
+ spin_table[3] = cpu;
+ smp_wmb();
+ spin_table[1] = __pa(start_secondary_47x);
+ mb();
+
+ return 0;
+}
+
+static struct smp_ops_t ppc47x_smp_ops = {
+ .probe = smp_mpic_probe,
+ .message_pass = smp_mpic_message_pass,
+ .setup_cpu = smp_ppc47x_setup_cpu,
+ .kick_cpu = smp_ppc47x_kick_cpu,
+ .give_timebase = smp_generic_give_timebase,
+ .take_timebase = smp_generic_take_timebase,
+};
+
+static void __init ppc47x_smp_init(void)
+{
+ if (mmu_has_feature(MMU_FTR_TYPE_47x))
+ smp_ops = &ppc47x_smp_ops;
+}
+
+#else /* CONFIG_SMP */
+static void __init ppc47x_smp_init(void) { }
+#endif /* CONFIG_SMP */
+
+static void __init ppc47x_setup_arch(void)
+{
+
+ /* No need to check the DMA config as we /know/ our windows are all of
+ * RAM. Lets hope that doesn't change */
+ swiotlb_detect_4g();
+
+ ppc47x_smp_init();
+}
+
+static int board_rev = -1;
+static int __init ppc47x_get_board_rev(void)
+{
+ int reg;
+ u8 *fpga;
+ struct device_node *np = NULL;
+
+ if (of_machine_is_compatible("ibm,currituck")) {
+ np = of_find_compatible_node(NULL, NULL, "ibm,currituck-fpga");
+ reg = 0;
+ } else if (of_machine_is_compatible("ibm,akebono")) {
+ np = of_find_compatible_node(NULL, NULL, "ibm,akebono-fpga");
+ reg = 2;
+ }
+
+ if (!np)
+ goto fail;
+
+ fpga = (u8 *) of_iomap(np, 0);
+ of_node_put(np);
+ if (!fpga)
+ goto fail;
+
+ board_rev = ioread8(fpga + reg) & 0x03;
+ pr_info("%s: Found board revision %d\n", __func__, board_rev);
+ iounmap(fpga);
+ return 0;
+
+fail:
+ pr_info("%s: Unable to find board revision\n", __func__);
+ return 0;
+}
+machine_arch_initcall(ppc47x, ppc47x_get_board_rev);
+
+/* Use USB controller should have been hardware swizzled but it wasn't :( */
+static void ppc47x_pci_irq_fixup(struct pci_dev *dev)
+{
+ if (dev->vendor == 0x1033 && (dev->device == 0x0035 ||
+ dev->device == 0x00e0)) {
+ if (board_rev == 0) {
+ dev->irq = irq_create_mapping(NULL, 47);
+ pr_info("%s: Mapping irq %d\n", __func__, dev->irq);
+ } else if (board_rev == 2) {
+ dev->irq = irq_create_mapping(NULL, 49);
+ pr_info("%s: Mapping irq %d\n", __func__, dev->irq);
+ } else {
+ pr_alert("%s: Unknown board revision\n", __func__);
+ }
+ }
+}
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init ppc47x_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (of_flat_dt_is_compatible(root, "ibm,akebono"))
+ return 1;
+
+ if (of_flat_dt_is_compatible(root, "ibm,currituck")) {
+ ppc_md.pci_irq_fixup = ppc47x_pci_irq_fixup;
+ return 1;
+ }
+
+ return 0;
+}
+
+define_machine(ppc47x) {
+ .name = "PowerPC 47x",
+ .probe = ppc47x_probe,
+ .progress = udbg_progress,
+ .init_IRQ = ppc47x_init_irq,
+ .setup_arch = ppc47x_setup_arch,
+ .restart = ppc4xx_reset_system,
+ .calibrate_decr = generic_calibrate_decr,
+};