diff options
Diffstat (limited to 'arch/powerpc/platforms/pasemi/setup.c')
| -rw-r--r-- | arch/powerpc/platforms/pasemi/setup.c | 61 |
1 files changed, 46 insertions, 15 deletions
diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c index 3d62060498b4..c64fb5bfb37e 100644 --- a/arch/powerpc/platforms/pasemi/setup.c +++ b/arch/powerpc/platforms/pasemi/setup.c @@ -27,6 +27,7 @@ #include <linux/delay.h> #include <linux/console.h> #include <linux/pci.h> +#include <linux/of_platform.h> #include <asm/prom.h> #include <asm/system.h> @@ -35,7 +36,7 @@ #include <asm/mpic.h> #include <asm/smp.h> #include <asm/time.h> -#include <asm/of_platform.h> +#include <asm/mmu.h> #include <pcmcia/ss.h> #include <pcmcia/cistpl.h> @@ -43,6 +44,10 @@ #include "pasemi.h" +#if !defined(CONFIG_SMP) +static void smp_send_stop(void) {} +#endif + /* SDC reset register, must be pre-mapped at reset time */ static void __iomem *reset_reg; @@ -56,10 +61,14 @@ struct mce_regs { static struct mce_regs mce_regs[MAX_MCE_REGS]; static int num_mce_regs; +static int nmi_virq = NO_IRQ; static void pas_restart(char *cmd) { + /* Need to put others cpu in hold loop so they're not sleeping */ + smp_send_stop(); + udelay(10000); printk("Restarting...\n"); while (1) out_le32(reset_reg, 0x6000000); @@ -126,9 +135,6 @@ static int __init pas_setup_mce_regs(void) struct pci_dev *dev; int reg; - if (!machine_is(pasemi)) - return -ENODEV; - /* Remap various SoC status registers for use by the MCE handler */ reg = 0; @@ -172,7 +178,7 @@ static int __init pas_setup_mce_regs(void) return 0; } -device_initcall(pas_setup_mce_regs); +machine_device_initcall(pasemi, pas_setup_mce_regs); static __init void pas_init_IRQ(void) { @@ -181,6 +187,8 @@ static __init void pas_init_IRQ(void) unsigned long openpic_addr; const unsigned int *opprop; int naddr, opplen; + int mpic_flags; + const unsigned int *nmiprop; struct mpic *mpic; mpic_node = NULL; @@ -213,13 +221,26 @@ static __init void pas_init_IRQ(void) openpic_addr = of_read_number(opprop, naddr); printk(KERN_DEBUG "OpenPIC addr: %lx\n", openpic_addr); + mpic_flags = MPIC_PRIMARY | MPIC_LARGE_VECTORS | MPIC_NO_BIAS; + + nmiprop = of_get_property(mpic_node, "nmi-source", NULL); + if (nmiprop) + mpic_flags |= MPIC_ENABLE_MCK; + mpic = mpic_alloc(mpic_node, openpic_addr, - MPIC_PRIMARY|MPIC_LARGE_VECTORS, - 0, 0, " PAS-OPIC "); + mpic_flags, 0, 0, "PASEMI-OPIC"); BUG_ON(!mpic); mpic_assign_isu(mpic, 0, openpic_addr + 0x10000); mpic_init(mpic); + /* The NMI/MCK source needs to be prio 15 */ + if (nmiprop) { + nmi_virq = irq_create_mapping(NULL, *nmiprop); + mpic_irq_set_priority(nmi_virq, 15); + set_irq_type(nmi_virq, IRQ_TYPE_EDGE_RISING); + mpic_unmask_irq(nmi_virq); + } + of_node_put(mpic_node); of_node_put(root); } @@ -239,6 +260,14 @@ static int pas_machine_check_handler(struct pt_regs *regs) srr0 = regs->nip; srr1 = regs->msr; + + if (nmi_virq != NO_IRQ && mpic_get_mcirq() == nmi_virq) { + printk(KERN_ERR "NMI delivered\n"); + debugger(regs); + mpic_end_irq(nmi_virq); + goto out; + } + dsisr = mfspr(SPRN_DSISR); printk(KERN_ERR "Machine Check on CPU %d\n", cpu); printk(KERN_ERR "SRR0 0x%016lx SRR1 0x%016lx\n", srr0, srr1); @@ -295,14 +324,14 @@ static int pas_machine_check_handler(struct pt_regs *regs) int i; printk(KERN_ERR "slb contents:\n"); - for (i = 0; i < SLB_NUM_ENTRIES; i++) { + for (i = 0; i < mmu_slb_size; i++) { asm volatile("slbmfee %0,%1" : "=r" (e) : "r" (i)); asm volatile("slbmfev %0,%1" : "=r" (v) : "r" (i)); printk(KERN_ERR "%02d %016lx %016lx\n", i, e, v); } } - +out: /* SRR1[62] is from MSR[62] if recoverable, so pass that back */ return !!(srr1 & 0x2); } @@ -362,16 +391,17 @@ static inline void pasemi_pcmcia_init(void) static struct of_device_id pasemi_bus_ids[] = { + /* Unfortunately needed for legacy firmwares */ { .type = "localbus", }, { .type = "sdc", }, + /* These are the proper entries, which newer firmware uses */ + { .compatible = "pasemi,localbus", }, + { .compatible = "pasemi,sdc", }, {}, }; static int __init pasemi_publish_devices(void) { - if (!machine_is(pasemi)) - return 0; - pasemi_pcmcia_init(); /* Publish OF platform devices for SDC and other non-PCI devices */ @@ -379,7 +409,7 @@ static int __init pasemi_publish_devices(void) return 0; } -device_initcall(pasemi_publish_devices); +machine_device_initcall(pasemi, pasemi_publish_devices); /* @@ -389,7 +419,8 @@ static int __init pas_probe(void) { unsigned long root = of_get_flat_dt_root(); - if (!of_flat_dt_is_compatible(root, "PA6T-1682M")) + if (!of_flat_dt_is_compatible(root, "PA6T-1682M") && + !of_flat_dt_is_compatible(root, "pasemi,pwrficient")) return 0; hpte_init_native(); @@ -400,7 +431,7 @@ static int __init pas_probe(void) } define_machine(pasemi) { - .name = "PA Semi PA6T-1682M", + .name = "PA Semi PWRficient", .probe = pas_probe, .setup_arch = pas_setup_arch, .init_early = pas_init_early, |