diff options
Diffstat (limited to 'arch/ppc/kernel/head_booke.h')
| -rw-r--r-- | arch/ppc/kernel/head_booke.h | 158 |
1 files changed, 87 insertions, 71 deletions
diff --git a/arch/ppc/kernel/head_booke.h b/arch/ppc/kernel/head_booke.h index f213d12eec08..9342acf12e72 100644 --- a/arch/ppc/kernel/head_booke.h +++ b/arch/ppc/kernel/head_booke.h @@ -49,6 +49,7 @@ * * On 40x critical is the only additional level * On 44x/e500 we have critical and machine check + * On e200 we have critical and debug (machine check occurs via critical) * * Additionally we reserve a SPRG for each priority level so we can free up a * GPR to use as the base for indirect access to the exception stacks. This @@ -60,53 +61,47 @@ /* CRIT_SPRG only used in critical exception handling */ #define CRIT_SPRG SPRN_SPRG2 -/* MCHECK_SPRG only used in critical exception handling */ +/* MCHECK_SPRG only used in machine check exception handling */ #define MCHECK_SPRG SPRN_SPRG6W #define MCHECK_STACK_TOP (exception_stack_top - 4096) #define CRIT_STACK_TOP (exception_stack_top) +/* only on e200 for now */ +#define DEBUG_STACK_TOP (exception_stack_top - 4096) +#define DEBUG_SPRG SPRN_SPRG6W + #ifdef CONFIG_SMP -#define BOOKE_LOAD_CRIT_STACK \ +#define BOOKE_LOAD_EXC_LEVEL_STACK(level) \ mfspr r8,SPRN_PIR; \ mulli r8,r8,BOOKE_EXCEPTION_STACK_SIZE; \ neg r8,r8; \ - addis r8,r8,CRIT_STACK_TOP@ha; \ - addi r8,r8,CRIT_STACK_TOP@l -#define BOOKE_LOAD_MCHECK_STACK \ - mfspr r8,SPRN_PIR; \ - mulli r8,r8,BOOKE_EXCEPTION_STACK_SIZE; \ - neg r8,r8; \ - addis r8,r8,MCHECK_STACK_TOP@ha; \ - addi r8,r8,MCHECK_STACK_TOP@l + addis r8,r8,level##_STACK_TOP@ha; \ + addi r8,r8,level##_STACK_TOP@l #else -#define BOOKE_LOAD_CRIT_STACK \ - lis r8,CRIT_STACK_TOP@h; \ - ori r8,r8,CRIT_STACK_TOP@l -#define BOOKE_LOAD_MCHECK_STACK \ - lis r8,MCHECK_STACK_TOP@h; \ - ori r8,r8,MCHECK_STACK_TOP@l +#define BOOKE_LOAD_EXC_LEVEL_STACK(level) \ + lis r8,level##_STACK_TOP@h; \ + ori r8,r8,level##_STACK_TOP@l #endif /* - * Exception prolog for critical exceptions. This is a little different - * from the normal exception prolog above since a critical exception - * can potentially occur at any point during normal exception processing. - * Thus we cannot use the same SPRG registers as the normal prolog above. - * Instead we use a portion of the critical exception stack at low physical - * addresses. + * Exception prolog for critical/machine check exceptions. This is a + * little different from the normal exception prolog above since a + * critical/machine check exception can potentially occur at any point + * during normal exception processing. Thus we cannot use the same SPRG + * registers as the normal prolog above. Instead we use a portion of the + * critical/machine check exception stack at low physical addresses. */ - -#define CRITICAL_EXCEPTION_PROLOG \ - mtspr CRIT_SPRG,r8; \ - BOOKE_LOAD_CRIT_STACK; /* r8 points to the crit stack */ \ +#define EXC_LEVEL_EXCEPTION_PROLOG(exc_level, exc_level_srr0, exc_level_srr1) \ + mtspr exc_level##_SPRG,r8; \ + BOOKE_LOAD_EXC_LEVEL_STACK(exc_level);/* r8 points to the exc_level stack*/ \ stw r10,GPR10-INT_FRAME_SIZE(r8); \ stw r11,GPR11-INT_FRAME_SIZE(r8); \ mfcr r10; /* save CR in r10 for now */\ - mfspr r11,SPRN_CSRR1; /* check whether user or kernel */\ + mfspr r11,exc_level_srr1; /* check whether user or kernel */\ andi. r11,r11,MSR_PR; \ mr r11,r8; \ - mfspr r8,CRIT_SPRG; \ + mfspr r8,exc_level##_SPRG; \ beq 1f; \ /* COMING FROM USER MODE */ \ mfspr r11,SPRN_SPRG3; /* if from user, start at top of */\ @@ -122,9 +117,9 @@ stw r12,_DEAR(r11); /* since they may have had stuff */\ mfspr r9,SPRN_ESR; /* in them at the point where the */\ stw r9,_ESR(r11); /* exception was taken */\ - mfspr r12,SPRN_CSRR0; \ + mfspr r12,exc_level_srr0; \ stw r1,GPR1(r11); \ - mfspr r9,SPRN_CSRR1; \ + mfspr r9,exc_level_srr1; \ stw r1,0(r11); \ mr r1,r11; \ rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\ @@ -132,45 +127,12 @@ SAVE_4GPRS(3, r11); \ SAVE_2GPRS(7, r11) -/* - * Exception prolog for machine check exceptions. This is similar to - * the critical exception prolog, except that machine check exceptions - * have their stack. - */ -#define MCHECK_EXCEPTION_PROLOG \ - mtspr MCHECK_SPRG,r8; \ - BOOKE_LOAD_MCHECK_STACK; /* r8 points to the mcheck stack */\ - stw r10,GPR10-INT_FRAME_SIZE(r8); \ - stw r11,GPR11-INT_FRAME_SIZE(r8); \ - mfcr r10; /* save CR in r10 for now */\ - mfspr r11,SPRN_MCSRR1; /* check whether user or kernel */\ - andi. r11,r11,MSR_PR; \ - mr r11,r8; \ - mfspr r8,MCHECK_SPRG; \ - beq 1f; \ - /* COMING FROM USER MODE */ \ - mfspr r11,SPRN_SPRG3; /* if from user, start at top of */\ - lwz r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\ - addi r11,r11,THREAD_SIZE; \ -1: subi r11,r11,INT_FRAME_SIZE; /* Allocate an exception frame */\ - stw r10,_CCR(r11); /* save various registers */\ - stw r12,GPR12(r11); \ - stw r9,GPR9(r11); \ - mflr r10; \ - stw r10,_LINK(r11); \ - mfspr r12,SPRN_DEAR; /* save DEAR and ESR in the frame */\ - stw r12,_DEAR(r11); /* since they may have had stuff */\ - mfspr r9,SPRN_ESR; /* in them at the point where the */\ - stw r9,_ESR(r11); /* exception was taken */\ - mfspr r12,SPRN_MCSRR0; \ - stw r1,GPR1(r11); \ - mfspr r9,SPRN_MCSRR1; \ - stw r1,0(r11); \ - mr r1,r11; \ - rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\ - stw r0,GPR0(r11); \ - SAVE_4GPRS(3, r11); \ - SAVE_2GPRS(7, r11) +#define CRITICAL_EXCEPTION_PROLOG \ + EXC_LEVEL_EXCEPTION_PROLOG(CRIT, SPRN_CSRR0, SPRN_CSRR1) +#define DEBUG_EXCEPTION_PROLOG \ + EXC_LEVEL_EXCEPTION_PROLOG(DEBUG, SPRN_DSRR0, SPRN_DSRR1) +#define MCHECK_EXCEPTION_PROLOG \ + EXC_LEVEL_EXCEPTION_PROLOG(MCHECK, SPRN_MCSRR0, SPRN_MCSRR1) /* * Exception vectors. @@ -237,7 +199,6 @@ label: EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, COPY_EE, transfer_to_handler, \ ret_from_except) - /* Check for a single step debug exception while in an exception * handler before state has been saved. This is to catch the case * where an instruction that we are trying to single step causes @@ -251,6 +212,60 @@ label: * save (and later restore) the MSR via SPRN_CSRR1, which will still have * the MSR_DE bit set. */ +#ifdef CONFIG_E200 +#define DEBUG_EXCEPTION \ + START_EXCEPTION(Debug); \ + DEBUG_EXCEPTION_PROLOG; \ + \ + /* \ + * If there is a single step or branch-taken exception in an \ + * exception entry sequence, it was probably meant to apply to \ + * the code where the exception occurred (since exception entry \ + * doesn't turn off DE automatically). We simulate the effect \ + * of turning off DE on entry to an exception handler by turning \ + * off DE in the CSRR1 value and clearing the debug status. \ + */ \ + mfspr r10,SPRN_DBSR; /* check single-step/branch taken */ \ + andis. r10,r10,DBSR_IC@h; \ + beq+ 2f; \ + \ + lis r10,KERNELBASE@h; /* check if exception in vectors */ \ + ori r10,r10,KERNELBASE@l; \ + cmplw r12,r10; \ + blt+ 2f; /* addr below exception vectors */ \ + \ + lis r10,Debug@h; \ + ori r10,r10,Debug@l; \ + cmplw r12,r10; \ + bgt+ 2f; /* addr above exception vectors */ \ + \ + /* here it looks like we got an inappropriate debug exception. */ \ +1: rlwinm r9,r9,0,~MSR_DE; /* clear DE in the CDRR1 value */ \ + lis r10,DBSR_IC@h; /* clear the IC event */ \ + mtspr SPRN_DBSR,r10; \ + /* restore state and get out */ \ + lwz r10,_CCR(r11); \ + lwz r0,GPR0(r11); \ + lwz r1,GPR1(r11); \ + mtcrf 0x80,r10; \ + mtspr SPRN_DSRR0,r12; \ + mtspr SPRN_DSRR1,r9; \ + lwz r9,GPR9(r11); \ + lwz r12,GPR12(r11); \ + mtspr DEBUG_SPRG,r8; \ + BOOKE_LOAD_EXC_LEVEL_STACK(DEBUG); /* r8 points to the debug stack */ \ + lwz r10,GPR10-INT_FRAME_SIZE(r8); \ + lwz r11,GPR11-INT_FRAME_SIZE(r8); \ + mfspr r8,DEBUG_SPRG; \ + \ + RFDI; \ + b .; \ + \ + /* continue normal handling for a critical exception... */ \ +2: mfspr r4,SPRN_DBSR; \ + addi r3,r1,STACK_FRAME_OVERHEAD; \ + EXC_XFER_TEMPLATE(DebugException, 0x2002, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, debug_transfer_to_handler, ret_from_debug_exc) +#else #define DEBUG_EXCEPTION \ START_EXCEPTION(Debug); \ CRITICAL_EXCEPTION_PROLOG; \ @@ -291,7 +306,7 @@ label: lwz r9,GPR9(r11); \ lwz r12,GPR12(r11); \ mtspr CRIT_SPRG,r8; \ - BOOKE_LOAD_CRIT_STACK; /* r8 points to the crit stack */ \ + BOOKE_LOAD_EXC_LEVEL_STACK(CRIT); /* r8 points to the debug stack */ \ lwz r10,GPR10-INT_FRAME_SIZE(r8); \ lwz r11,GPR11-INT_FRAME_SIZE(r8); \ mfspr r8,CRIT_SPRG; \ @@ -303,6 +318,7 @@ label: 2: mfspr r4,SPRN_DBSR; \ addi r3,r1,STACK_FRAME_OVERHEAD; \ EXC_XFER_TEMPLATE(DebugException, 0x2002, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, crit_transfer_to_handler, ret_from_crit_exc) +#endif #define INSTRUCTION_STORAGE_EXCEPTION \ START_EXCEPTION(InstructionStorage) \ |