summaryrefslogtreecommitdiff
path: root/arch/sh/drivers/pci/pcie-sh7786.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/sh/drivers/pci/pcie-sh7786.c')
-rw-r--r--arch/sh/drivers/pci/pcie-sh7786.c251
1 files changed, 195 insertions, 56 deletions
diff --git a/arch/sh/drivers/pci/pcie-sh7786.c b/arch/sh/drivers/pci/pcie-sh7786.c
index 68cb9b0ac9d2..96e9b058aa1d 100644
--- a/arch/sh/drivers/pci/pcie-sh7786.c
+++ b/arch/sh/drivers/pci/pcie-sh7786.c
@@ -13,11 +13,14 @@
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/sh_clk.h>
#include "pcie-sh7786.h"
#include <asm/sizes.h>
struct sh7786_pcie_port {
struct pci_channel *hose;
+ struct clk *fclk, phy_clk;
unsigned int index;
int endpoint;
int link;
@@ -51,6 +54,7 @@ static struct resource sh7786_pci0_resources[] = {
.name = "PCIe0 MEM 2",
.start = 0xfe100000,
.end = 0xfe100000 + SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
},
};
@@ -74,6 +78,7 @@ static struct resource sh7786_pci1_resources[] = {
.name = "PCIe1 MEM 2",
.start = 0xfe300000,
.end = 0xfe300000 + SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
},
};
@@ -82,6 +87,7 @@ static struct resource sh7786_pci2_resources[] = {
.name = "PCIe2 IO",
.start = 0xfc800000,
.end = 0xfc800000 + SZ_4M - 1,
+ .flags = IORESOURCE_IO,
}, {
.name = "PCIe2 MEM 0",
.start = 0x80000000,
@@ -96,6 +102,7 @@ static struct resource sh7786_pci2_resources[] = {
.name = "PCIe2 MEM 2",
.start = 0xfcd00000,
.end = 0xfcd00000 + SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
},
};
@@ -117,7 +124,29 @@ static struct pci_channel sh7786_pci_channels[] = {
DEFINE_CONTROLLER(0xfcc00000, 2),
};
-static int phy_wait_for_ack(struct pci_channel *chan)
+static struct clk fixed_pciexclkp = {
+ .rate = 100000000, /* 100 MHz reference clock */
+};
+
+static void __devinit sh7786_pci_fixup(struct pci_dev *dev)
+{
+ /*
+ * Prevent enumeration of root complex resources.
+ */
+ if (pci_is_root_bus(dev->bus) && dev->devfn == 0) {
+ int i;
+
+ for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+ dev->resource[i].start = 0;
+ dev->resource[i].end = 0;
+ dev->resource[i].flags = 0;
+ }
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_RENESAS, PCI_DEVICE_ID_RENESAS_SH7786,
+ sh7786_pci_fixup);
+
+static int __init phy_wait_for_ack(struct pci_channel *chan)
{
unsigned int timeout = 100;
@@ -131,7 +160,7 @@ static int phy_wait_for_ack(struct pci_channel *chan)
return -ETIMEDOUT;
}
-static int pci_wait_for_irq(struct pci_channel *chan, unsigned int mask)
+static int __init pci_wait_for_irq(struct pci_channel *chan, unsigned int mask)
{
unsigned int timeout = 100;
@@ -145,19 +174,14 @@ static int pci_wait_for_irq(struct pci_channel *chan, unsigned int mask)
return -ETIMEDOUT;
}
-static void phy_write_reg(struct pci_channel *chan, unsigned int addr,
- unsigned int lane, unsigned int data)
+static void __init phy_write_reg(struct pci_channel *chan, unsigned int addr,
+ unsigned int lane, unsigned int data)
{
- unsigned long phyaddr, ctrl;
+ unsigned long phyaddr;
phyaddr = (1 << BITS_CMD) + ((lane & 0xf) << BITS_LANE) +
((addr & 0xff) << BITS_ADR);
- /* Enable clock */
- ctrl = pci_read_reg(chan, SH4A_PCIEPHYCTLR);
- ctrl |= (1 << BITS_CKE);
- pci_write_reg(chan, ctrl, SH4A_PCIEPHYCTLR);
-
/* Set write data */
pci_write_reg(chan, data, SH4A_PCIEPHYDOUTR);
pci_write_reg(chan, phyaddr, SH4A_PCIEPHYADRR);
@@ -165,20 +189,74 @@ static void phy_write_reg(struct pci_channel *chan, unsigned int addr,
phy_wait_for_ack(chan);
/* Clear command */
+ pci_write_reg(chan, 0, SH4A_PCIEPHYDOUTR);
pci_write_reg(chan, 0, SH4A_PCIEPHYADRR);
phy_wait_for_ack(chan);
+}
- /* Disable clock */
- ctrl = pci_read_reg(chan, SH4A_PCIEPHYCTLR);
- ctrl &= ~(1 << BITS_CKE);
- pci_write_reg(chan, ctrl, SH4A_PCIEPHYCTLR);
+static int __init pcie_clk_init(struct sh7786_pcie_port *port)
+{
+ struct pci_channel *chan = port->hose;
+ struct clk *clk;
+ char fclk_name[16];
+ int ret;
+
+ /*
+ * First register the fixed clock
+ */
+ ret = clk_register(&fixed_pciexclkp);
+ if (unlikely(ret != 0))
+ return ret;
+
+ /*
+ * Grab the port's function clock, which the PHY clock depends
+ * on. clock lookups don't help us much at this point, since no
+ * dev_id is available this early. Lame.
+ */
+ snprintf(fclk_name, sizeof(fclk_name), "pcie%d_fck", port->index);
+
+ port->fclk = clk_get(NULL, fclk_name);
+ if (IS_ERR(port->fclk)) {
+ ret = PTR_ERR(port->fclk);
+ goto err_fclk;
+ }
+
+ clk_enable(port->fclk);
+
+ /*
+ * And now, set up the PHY clock
+ */
+ clk = &port->phy_clk;
+
+ memset(clk, 0, sizeof(struct clk));
+
+ clk->parent = &fixed_pciexclkp;
+ clk->enable_reg = (void __iomem *)(chan->reg_base + SH4A_PCIEPHYCTLR);
+ clk->enable_bit = BITS_CKE;
+
+ ret = sh_clk_mstp32_register(clk, 1);
+ if (unlikely(ret < 0))
+ goto err_phy;
+
+ return 0;
+
+err_phy:
+ clk_disable(port->fclk);
+ clk_put(port->fclk);
+err_fclk:
+ clk_unregister(&fixed_pciexclkp);
+
+ return ret;
}
-static int phy_init(struct pci_channel *chan)
+static int __init phy_init(struct sh7786_pcie_port *port)
{
+ struct pci_channel *chan = port->hose;
unsigned int timeout = 100;
+ clk_enable(&port->phy_clk);
+
/* Initialize the phy */
phy_write_reg(chan, 0x60, 0xf, 0x004b008b);
phy_write_reg(chan, 0x61, 0xf, 0x00007b41);
@@ -187,9 +265,13 @@ static int phy_init(struct pci_channel *chan)
phy_write_reg(chan, 0x66, 0xf, 0x00000010);
phy_write_reg(chan, 0x74, 0xf, 0x0007001c);
phy_write_reg(chan, 0x79, 0xf, 0x01fc000d);
+ phy_write_reg(chan, 0xb0, 0xf, 0x00000610);
/* Deassert Standby */
- phy_write_reg(chan, 0x67, 0xf, 0x00000400);
+ phy_write_reg(chan, 0x67, 0x1, 0x00000400);
+
+ /* Disable clock */
+ clk_disable(&port->phy_clk);
while (timeout--) {
if (pci_read_reg(chan, SH4A_PCIEPHYSR))
@@ -201,22 +283,33 @@ static int phy_init(struct pci_channel *chan)
return -ETIMEDOUT;
}
-static int pcie_init(struct sh7786_pcie_port *port)
+static void __init pcie_reset(struct sh7786_pcie_port *port)
+{
+ struct pci_channel *chan = port->hose;
+
+ pci_write_reg(chan, 1, SH4A_PCIESRSTR);
+ pci_write_reg(chan, 0, SH4A_PCIETCTLR);
+ pci_write_reg(chan, 0, SH4A_PCIESRSTR);
+ pci_write_reg(chan, 0, SH4A_PCIETXVC0SR);
+}
+
+static int __init pcie_init(struct sh7786_pcie_port *port)
{
struct pci_channel *chan = port->hose;
unsigned int data;
phys_addr_t memphys;
size_t memsize;
- int ret, i;
+ int ret, i, win;
/* Begin initialization */
- pci_write_reg(chan, 0, SH4A_PCIETCTLR);
+ pcie_reset(port);
- /* Initialize as type1. */
- data = pci_read_reg(chan, SH4A_PCIEPCICONF3);
- data &= ~(0x7f << 16);
- data |= PCI_HEADER_TYPE_BRIDGE << 16;
- pci_write_reg(chan, data, SH4A_PCIEPCICONF3);
+ /*
+ * Initial header for port config space is type 1, set the device
+ * class to match. Hardware takes care of propagating the IDSETR
+ * settings, so there is no need to bother with a quirk.
+ */
+ pci_write_reg(chan, PCI_CLASS_BRIDGE_PCI << 16, SH4A_PCIEIDSETR1);
/* Initialize default capabilities. */
data = pci_read_reg(chan, SH4A_PCIEEXPCAP0);
@@ -268,30 +361,33 @@ static int pcie_init(struct sh7786_pcie_port *port)
* LAR1/LAMR1.
*/
if (memsize > SZ_512M) {
- __raw_writel(memphys + SZ_512M, chan->reg_base + SH4A_PCIELAR1);
- __raw_writel(((memsize - SZ_512M) - SZ_256) | 1,
- chan->reg_base + SH4A_PCIELAMR1);
+ pci_write_reg(chan, memphys + SZ_512M, SH4A_PCIELAR1);
+ pci_write_reg(chan, ((memsize - SZ_512M) - SZ_256) | 1,
+ SH4A_PCIELAMR1);
memsize = SZ_512M;
} else {
/*
* Otherwise just zero it out and disable it.
*/
- __raw_writel(0, chan->reg_base + SH4A_PCIELAR1);
- __raw_writel(0, chan->reg_base + SH4A_PCIELAMR1);
+ pci_write_reg(chan, 0, SH4A_PCIELAR1);
+ pci_write_reg(chan, 0, SH4A_PCIELAMR1);
}
/*
* LAR0/LAMR0 covers up to the first 512MB, which is enough to
* cover all of lowmem on most platforms.
*/
- __raw_writel(memphys, chan->reg_base + SH4A_PCIELAR0);
- __raw_writel((memsize - SZ_256) | 1, chan->reg_base + SH4A_PCIELAMR0);
+ pci_write_reg(chan, memphys, SH4A_PCIELAR0);
+ pci_write_reg(chan, (memsize - SZ_256) | 1, SH4A_PCIELAMR0);
/* Finish initialization */
data = pci_read_reg(chan, SH4A_PCIETCTLR);
data |= 0x1;
pci_write_reg(chan, data, SH4A_PCIETCTLR);
+ /* Let things settle down a bit.. */
+ mdelay(100);
+
/* Enable DL_Active Interrupt generation */
data = pci_read_reg(chan, SH4A_PCIEDLINTENR);
data |= PCIEDLINTENR_DLL_ACT_ENABLE;
@@ -302,9 +398,12 @@ static int pcie_init(struct sh7786_pcie_port *port)
data |= PCIEMACCTLR_SCR_DIS | (0xff << 16);
pci_write_reg(chan, data, SH4A_PCIEMACCTLR);
+ /*
+ * This will timeout if we don't have a link, but we permit the
+ * port to register anyways in order to support hotplug on future
+ * hardware.
+ */
ret = pci_wait_for_irq(chan, MASK_INT_TX_CTRL);
- if (unlikely(ret != 0))
- return -ENODEV;
data = pci_read_reg(chan, SH4A_PCIEPCICONF1);
data &= ~(PCI_STATUS_DEVSEL_MASK << 16);
@@ -317,35 +416,48 @@ static int pcie_init(struct sh7786_pcie_port *port)
wmb();
- data = pci_read_reg(chan, SH4A_PCIEMACSR);
- printk(KERN_NOTICE "PCI: PCIe#%d link width %d\n",
- port->index, (data >> 20) & 0x3f);
-
+ if (ret == 0) {
+ data = pci_read_reg(chan, SH4A_PCIEMACSR);
+ printk(KERN_NOTICE "PCI: PCIe#%d x%d link detected\n",
+ port->index, (data >> 20) & 0x3f);
+ } else
+ printk(KERN_NOTICE "PCI: PCIe#%d link down\n",
+ port->index);
- for (i = 0; i < chan->nr_resources; i++) {
+ for (i = win = 0; i < chan->nr_resources; i++) {
struct resource *res = chan->resources + i;
resource_size_t size;
- u32 enable_mask;
+ u32 mask;
- pci_write_reg(chan, 0x00000000, SH4A_PCIEPTCTLR(i));
+ /*
+ * We can't use the 32-bit mode windows in legacy 29-bit
+ * mode, so just skip them entirely.
+ */
+ if ((res->flags & IORESOURCE_MEM_32BIT) && __in_29bit_mode())
+ continue;
- size = resource_size(res);
+ pci_write_reg(chan, 0x00000000, SH4A_PCIEPTCTLR(win));
/*
* The PAMR mask is calculated in units of 256kB, which
* keeps things pretty simple.
*/
- __raw_writel(((roundup_pow_of_two(size) / SZ_256K) - 1) << 18,
- chan->reg_base + SH4A_PCIEPAMR(i));
+ size = resource_size(res);
+ mask = (roundup_pow_of_two(size) / SZ_256K) - 1;
+ pci_write_reg(chan, mask << 18, SH4A_PCIEPAMR(win));
- pci_write_reg(chan, 0x00000000, SH4A_PCIEPARH(i));
- pci_write_reg(chan, 0x00000000, SH4A_PCIEPARL(i));
+ pci_write_reg(chan, upper_32_bits(res->start),
+ SH4A_PCIEPARH(win));
+ pci_write_reg(chan, lower_32_bits(res->start),
+ SH4A_PCIEPARL(win));
- enable_mask = MASK_PARE;
+ mask = MASK_PARE;
if (res->flags & IORESOURCE_IO)
- enable_mask |= MASK_SPC;
+ mask |= MASK_SPC;
+
+ pci_write_reg(chan, mask, SH4A_PCIEPTCTLR(win));
- pci_write_reg(chan, enable_mask, SH4A_PCIEPTCTLR(i));
+ win++;
}
return 0;
@@ -356,26 +468,33 @@ int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
return 71;
}
-static int sh7786_pcie_core_init(void)
+static int __init sh7786_pcie_core_init(void)
{
/* Return the number of ports */
return test_mode_pin(MODE_PIN12) ? 3 : 2;
}
-static int __devinit sh7786_pcie_init_hw(struct sh7786_pcie_port *port)
+static int __init sh7786_pcie_init_hw(struct sh7786_pcie_port *port)
{
int ret;
- ret = phy_init(port->hose);
- if (unlikely(ret < 0))
- return ret;
-
/*
* Check if we are configured in endpoint or root complex mode,
* this is a fixed pin setting that applies to all PCIe ports.
*/
port->endpoint = test_mode_pin(MODE_PIN11);
+ /*
+ * Setup clocks, needed both for PHY and PCIe registers.
+ */
+ ret = pcie_clk_init(port);
+ if (unlikely(ret < 0))
+ return ret;
+
+ ret = phy_init(port);
+ if (unlikely(ret < 0))
+ return ret;
+
ret = pcie_init(port);
if (unlikely(ret < 0))
return ret;
@@ -390,9 +509,10 @@ static struct sh7786_pcie_hwops sh7786_65nm_pcie_hwops __initdata = {
static int __init sh7786_pcie_init(void)
{
+ struct clk *platclk;
int ret = 0, i;
- printk(KERN_NOTICE "PCI: Starting intialization.\n");
+ printk(KERN_NOTICE "PCI: Starting initialization.\n");
sh7786_pcie_hwops = &sh7786_65nm_pcie_hwops;
@@ -407,6 +527,22 @@ static int __init sh7786_pcie_init(void)
if (unlikely(!sh7786_pcie_ports))
return -ENOMEM;
+ /*
+ * Fetch any optional platform clock associated with this block.
+ *
+ * This is a rather nasty hack for boards with spec-mocking FPGAs
+ * that have a secondary set of clocks outside of the on-chip
+ * ones that need to be accounted for before there is any chance
+ * of touching the existing MSTP bits or CPG clocks.
+ */
+ platclk = clk_get(NULL, "pcie_plat_clk");
+ if (IS_ERR(platclk)) {
+ /* Sane hardware should probably get a WARN_ON.. */
+ platclk = NULL;
+ }
+
+ clk_enable(platclk);
+
printk(KERN_NOTICE "PCI: probing %d ports.\n", nr_ports);
for (i = 0; i < nr_ports; i++) {
@@ -419,8 +555,11 @@ static int __init sh7786_pcie_init(void)
ret |= sh7786_pcie_hwops->port_init_hw(port);
}
- if (unlikely(ret))
+ if (unlikely(ret)) {
+ clk_disable(platclk);
+ clk_put(platclk);
return ret;
+ }
return 0;
}