diff options
Diffstat (limited to 'drivers/ata/Kconfig')
-rw-r--r-- | drivers/ata/Kconfig | 95 |
1 files changed, 53 insertions, 42 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 7bdbe5a914d0..7d893a60f994 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -2,13 +2,13 @@ # SATA/PATA driver configuration # -menu "Serial ATA (prod) and Parallel ATA (experimental) drivers" - -config ATA - tristate "ATA device support" +menuconfig ATA + tristate "Serial ATA (prod) and Parallel ATA (experimental) drivers" + depends on HAS_IOMEM depends on BLOCK depends on !(M32R || M68K) || BROKEN depends on !SUN4 || BROKEN + depends on !(SPARC64 && !PCI) select SCSI ---help--- If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or @@ -23,6 +23,19 @@ config ATA_NONSTANDARD bool default n +config ATA_ACPI + bool + depends on ACPI && PCI + default y + help + This option adds support for ATA-related ACPI objects. + These ACPI objects add the ability to retrieve taskfiles + from the ACPI BIOS and write them to the disk controller. + These objects may be related to performance, security, + power management, or other areas. + You can disable this at kernel boot time by using the + option libata.noacpi=1 + config SATA_AHCI tristate "AHCI SATA support" depends on PCI @@ -120,7 +133,7 @@ config SATA_SIS depends on PCI select PATA_SIS help - This option enables support for SiS Serial ATA on + This option enables support for SiS Serial ATA on SiS 964/965/966/180 and Parallel ATA on SiS 180. The PATA support for SiS 180 requires additionally to enable the PATA_SIS driver in the config. @@ -156,24 +169,6 @@ config SATA_INIC162X help This option enables support for Initio 162x Serial ATA. -config SATA_INTEL_COMBINED - bool - depends on IDE=y && !BLK_DEV_IDE_SATA && (SATA_AHCI || ATA_PIIX) - default y - -config SATA_ACPI - bool - depends on ACPI && PCI - default y - help - This option adds support for SATA-related ACPI objects. - These ACPI objects add the ability to retrieve taskfiles - from the ACPI BIOS and write them to the disk controller. - These objects may be related to performance, security, - power management, or other areas. - You can disable this at kernel boot time by using the - option libata.noacpi=1 - config PATA_ALI tristate "ALi PATA support (Experimental)" depends on PCI && EXPERIMENTAL @@ -184,7 +179,7 @@ config PATA_ALI If unsure, say N. config PATA_AMD - tristate "AMD/NVidia PATA support (Experimental)" + tristate "AMD/NVidia PATA support" depends on PCI help This option enables support for the AMD and NVidia PATA @@ -209,6 +204,16 @@ config PATA_ATIIXP If unsure, say N. +config PATA_CMD640_PCI + tristate "CMD640 PCI PATA support (Very Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for the CMD640 PCI IDE + interface chip. Only the primary channel is currently + supported. + + If unsure, say N. + config PATA_CMD64X tristate "CMD64x PATA support (Very Experimental)" depends on PCI&& EXPERIMENTAL @@ -273,7 +278,7 @@ config ATA_GENERIC If unsure, say N. config PATA_HPT366 - tristate "HPT 366/368 PATA support (Very Experimental)" + tristate "HPT 366/368 PATA support (Experimental)" depends on PCI && EXPERIMENTAL help This option enables support for the HPT 366 and 368 @@ -282,7 +287,7 @@ config PATA_HPT366 If unsure, say N. config PATA_HPT37X - tristate "HPT 370/370A/371/372/374/302 PATA support (Very Experimental)" + tristate "HPT 370/370A/371/372/374/302 PATA support (Experimental)" depends on PCI && EXPERIMENTAL help This option enables support for the majority of the later HPT @@ -309,7 +314,7 @@ config PATA_HPT3X3 If unsure, say N. config PATA_ISAPNP - tristate "ISA Plug and Play PATA support (Very Experimental)" + tristate "ISA Plug and Play PATA support (Experimental)" depends on EXPERIMENTAL && ISAPNP help This option enables support for ISA plug & play ATA @@ -318,8 +323,8 @@ config PATA_ISAPNP If unsure, say N. config PATA_IT821X - tristate "IT8211/2 PATA support (Experimental)" - depends on PCI && EXPERIMENTAL + tristate "IT8211/2 PATA support" + depends on PCI help This option enables support for the ITE 8211 and 8212 PATA controllers via the new ATA layer, including RAID @@ -390,10 +395,10 @@ config PATA_MPIIX If unsure, say N. config PATA_OLDPIIX - tristate "Intel PATA old PIIX support (Experimental)" - depends on PCI && EXPERIMENTAL + tristate "Intel PATA old PIIX support" + depends on PCI help - This option enables support for old(?) PIIX PATA support. + This option enables support for early PIIX PATA support. If unsure, say N. @@ -430,7 +435,7 @@ config PATA_OPTIDMA help This option enables DMA/PIO support for the later OPTi controllers found on some old motherboards and in some - latops + laptops. If unsure, say N. @@ -444,7 +449,7 @@ config PATA_PCMCIA If unsure, say N. config PATA_PDC_OLD - tristate "Older Promise PATA controller support (Very Experimental)" + tristate "Older Promise PATA controller support (Experimental)" depends on PCI && EXPERIMENTAL help This option enables support for the Promise 20246, 20262, 20263, @@ -459,7 +464,7 @@ config PATA_QDI Support for QDI 6500 and 6580 PATA controllers on VESA local bus. config PATA_RADISYS - tristate "RADISYS 82600 PATA support (Very experimental)" + tristate "RADISYS 82600 PATA support (Very Experimental)" depends on PCI && EXPERIMENTAL help This option enables support for the RADISYS 82600 @@ -477,7 +482,7 @@ config PATA_RZ1000 If unsure, say N. config PATA_SC1200 - tristate "SC1200 PATA support (Raving Lunatic)" + tristate "SC1200 PATA support (Very Experimental)" depends on PCI && EXPERIMENTAL help This option enables support for the NatSemi/AMD SC1200 SoC @@ -486,8 +491,8 @@ config PATA_SC1200 If unsure, say N. config PATA_SERVERWORKS - tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support (Experimental)" - depends on PCI && EXPERIMENTAL + tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support" + depends on PCI help This option enables support for the Serverworks OSB4/CSB5/CSB6 and HT1000 PATA controllers, via the new ATA layer. @@ -545,13 +550,21 @@ config PATA_WINBOND_VLB config PATA_PLATFORM tristate "Generic platform device PATA support" - depends on EMBEDDED + depends on EMBEDDED || ARCH_RPC help This option enables support for generic directly connected ATA devices commonly found on embedded systems. If unsure, say N. +config PATA_ICSIDE + tristate "Acorn ICS PATA support" + depends on ARM && ARCH_ACORN + help + On Acorn systems, say Y here if you wish to use the ICS PATA + interface card. This is not required for ICS partition support. + If you are unsure, say N to this. + config PATA_IXP4XX_CF tristate "IXP4XX Compact Flash support" depends on ARCH_IXP4XX @@ -571,6 +584,4 @@ config PATA_SCC If unsure, say N. -endif -endmenu - +endif # ATA |