summaryrefslogtreecommitdiff
path: root/drivers/ata/pata_scc.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/pata_scc.c')
-rw-r--r--drivers/ata/pata_scc.c1110
1 files changed, 0 insertions, 1110 deletions
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
deleted file mode 100644
index 5cd60d6388ec..000000000000
--- a/drivers/ata/pata_scc.c
+++ /dev/null
@@ -1,1110 +0,0 @@
-/*
- * Support for IDE interfaces on Celleb platform
- *
- * (C) Copyright 2006 TOSHIBA CORPORATION
- *
- * This code is based on drivers/ata/ata_piix.c:
- * Copyright 2003-2005 Red Hat Inc
- * Copyright 2003-2005 Jeff Garzik
- * Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer
- * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
- * Copyright (C) 2003 Red Hat Inc
- *
- * and drivers/ata/ahci.c:
- * Copyright 2004-2005 Red Hat, Inc.
- *
- * and drivers/ata/libata-core.c:
- * Copyright 2003-2004 Red Hat, Inc. All rights reserved.
- * Copyright 2003-2004 Jeff Garzik
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/blkdev.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <scsi/scsi_host.h>
-#include <linux/libata.h>
-
-#define DRV_NAME "pata_scc"
-#define DRV_VERSION "0.3"
-
-#define PCI_DEVICE_ID_TOSHIBA_SCC_ATA 0x01b4
-
-/* PCI BARs */
-#define SCC_CTRL_BAR 0
-#define SCC_BMID_BAR 1
-
-/* offset of CTRL registers */
-#define SCC_CTL_PIOSHT 0x000
-#define SCC_CTL_PIOCT 0x004
-#define SCC_CTL_MDMACT 0x008
-#define SCC_CTL_MCRCST 0x00C
-#define SCC_CTL_SDMACT 0x010
-#define SCC_CTL_SCRCST 0x014
-#define SCC_CTL_UDENVT 0x018
-#define SCC_CTL_TDVHSEL 0x020
-#define SCC_CTL_MODEREG 0x024
-#define SCC_CTL_ECMODE 0xF00
-#define SCC_CTL_MAEA0 0xF50
-#define SCC_CTL_MAEC0 0xF54
-#define SCC_CTL_CCKCTRL 0xFF0
-
-/* offset of BMID registers */
-#define SCC_DMA_CMD 0x000
-#define SCC_DMA_STATUS 0x004
-#define SCC_DMA_TABLE_OFS 0x008
-#define SCC_DMA_INTMASK 0x010
-#define SCC_DMA_INTST 0x014
-#define SCC_DMA_PTERADD 0x018
-#define SCC_REG_CMD_ADDR 0x020
-#define SCC_REG_DATA 0x000
-#define SCC_REG_ERR 0x004
-#define SCC_REG_FEATURE 0x004
-#define SCC_REG_NSECT 0x008
-#define SCC_REG_LBAL 0x00C
-#define SCC_REG_LBAM 0x010
-#define SCC_REG_LBAH 0x014
-#define SCC_REG_DEVICE 0x018
-#define SCC_REG_STATUS 0x01C
-#define SCC_REG_CMD 0x01C
-#define SCC_REG_ALTSTATUS 0x020
-
-/* register value */
-#define TDVHSEL_MASTER 0x00000001
-#define TDVHSEL_SLAVE 0x00000004
-
-#define MODE_JCUSFEN 0x00000080
-
-#define ECMODE_VALUE 0x01
-
-#define CCKCTRL_ATARESET 0x00040000
-#define CCKCTRL_BUFCNT 0x00020000
-#define CCKCTRL_CRST 0x00010000
-#define CCKCTRL_OCLKEN 0x00000100
-#define CCKCTRL_ATACLKOEN 0x00000002
-#define CCKCTRL_LCLKEN 0x00000001
-
-#define QCHCD_IOS_SS 0x00000001
-
-#define QCHSD_STPDIAG 0x00020000
-
-#define INTMASK_MSK 0xD1000012
-#define INTSTS_SERROR 0x80000000
-#define INTSTS_PRERR 0x40000000
-#define INTSTS_RERR 0x10000000
-#define INTSTS_ICERR 0x01000000
-#define INTSTS_BMSINT 0x00000010
-#define INTSTS_BMHE 0x00000008
-#define INTSTS_IOIRQS 0x00000004
-#define INTSTS_INTRQ 0x00000002
-#define INTSTS_ACTEINT 0x00000001
-
-
-/* PIO transfer mode table */
-/* JCHST */
-static const unsigned long JCHSTtbl[2][7] = {
- {0x0E, 0x05, 0x02, 0x03, 0x02, 0x00, 0x00}, /* 100MHz */
- {0x13, 0x07, 0x04, 0x04, 0x03, 0x00, 0x00} /* 133MHz */
-};
-
-/* JCHHT */
-static const unsigned long JCHHTtbl[2][7] = {
- {0x0E, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00}, /* 100MHz */
- {0x13, 0x03, 0x03, 0x03, 0x03, 0x00, 0x00} /* 133MHz */
-};
-
-/* JCHCT */
-static const unsigned long JCHCTtbl[2][7] = {
- {0x1D, 0x1D, 0x1C, 0x0B, 0x06, 0x00, 0x00}, /* 100MHz */
- {0x27, 0x26, 0x26, 0x0E, 0x09, 0x00, 0x00} /* 133MHz */
-};
-
-/* DMA transfer mode table */
-/* JCHDCTM/JCHDCTS */
-static const unsigned long JCHDCTxtbl[2][7] = {
- {0x0A, 0x06, 0x04, 0x03, 0x01, 0x00, 0x00}, /* 100MHz */
- {0x0E, 0x09, 0x06, 0x04, 0x02, 0x01, 0x00} /* 133MHz */
-};
-
-/* JCSTWTM/JCSTWTS */
-static const unsigned long JCSTWTxtbl[2][7] = {
- {0x06, 0x04, 0x03, 0x02, 0x02, 0x02, 0x00}, /* 100MHz */
- {0x09, 0x06, 0x04, 0x02, 0x02, 0x02, 0x02} /* 133MHz */
-};
-
-/* JCTSS */
-static const unsigned long JCTSStbl[2][7] = {
- {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x00}, /* 100MHz */
- {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05} /* 133MHz */
-};
-
-/* JCENVT */
-static const unsigned long JCENVTtbl[2][7] = {
- {0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00}, /* 100MHz */
- {0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02} /* 133MHz */
-};
-
-/* JCACTSELS/JCACTSELM */
-static const unsigned long JCACTSELtbl[2][7] = {
- {0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00}, /* 100MHz */
- {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01} /* 133MHz */
-};
-
-static const struct pci_device_id scc_pci_tbl[] = {
- { PCI_VDEVICE(TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SCC_ATA), 0},
- { } /* terminate list */
-};
-
-/**
- * scc_set_piomode - Initialize host controller PATA PIO timings
- * @ap: Port whose timings we are configuring
- * @adev: um
- *
- * Set PIO mode for device.
- *
- * LOCKING:
- * None (inherited from caller).
- */
-
-static void scc_set_piomode (struct ata_port *ap, struct ata_device *adev)
-{
- unsigned int pio = adev->pio_mode - XFER_PIO_0;
- void __iomem *ctrl_base = ap->host->iomap[SCC_CTRL_BAR];
- void __iomem *cckctrl_port = ctrl_base + SCC_CTL_CCKCTRL;
- void __iomem *piosht_port = ctrl_base + SCC_CTL_PIOSHT;
- void __iomem *pioct_port = ctrl_base + SCC_CTL_PIOCT;
- unsigned long reg;
- int offset;
-
- reg = in_be32(cckctrl_port);
- if (reg & CCKCTRL_ATACLKOEN)
- offset = 1; /* 133MHz */
- else
- offset = 0; /* 100MHz */
-
- reg = JCHSTtbl[offset][pio] << 16 | JCHHTtbl[offset][pio];
- out_be32(piosht_port, reg);
- reg = JCHCTtbl[offset][pio];
- out_be32(pioct_port, reg);
-}
-
-/**
- * scc_set_dmamode - Initialize host controller PATA DMA timings
- * @ap: Port whose timings we are configuring
- * @adev: um
- *
- * Set UDMA mode for device.
- *
- * LOCKING:
- * None (inherited from caller).
- */
-
-static void scc_set_dmamode (struct ata_port *ap, struct ata_device *adev)
-{
- unsigned int udma = adev->dma_mode;
- unsigned int is_slave = (adev->devno != 0);
- u8 speed = udma;
- void __iomem *ctrl_base = ap->host->iomap[SCC_CTRL_BAR];
- void __iomem *cckctrl_port = ctrl_base + SCC_CTL_CCKCTRL;
- void __iomem *mdmact_port = ctrl_base + SCC_CTL_MDMACT;
- void __iomem *mcrcst_port = ctrl_base + SCC_CTL_MCRCST;
- void __iomem *sdmact_port = ctrl_base + SCC_CTL_SDMACT;
- void __iomem *scrcst_port = ctrl_base + SCC_CTL_SCRCST;
- void __iomem *udenvt_port = ctrl_base + SCC_CTL_UDENVT;
- void __iomem *tdvhsel_port = ctrl_base + SCC_CTL_TDVHSEL;
- int offset, idx;
-
- if (in_be32(cckctrl_port) & CCKCTRL_ATACLKOEN)
- offset = 1; /* 133MHz */
- else
- offset = 0; /* 100MHz */
-
- if (speed >= XFER_UDMA_0)
- idx = speed - XFER_UDMA_0;
- else
- return;
-
- if (is_slave) {
- out_be32(sdmact_port, JCHDCTxtbl[offset][idx]);
- out_be32(scrcst_port, JCSTWTxtbl[offset][idx]);
- out_be32(tdvhsel_port,
- (in_be32(tdvhsel_port) & ~TDVHSEL_SLAVE) | (JCACTSELtbl[offset][idx] << 2));
- } else {
- out_be32(mdmact_port, JCHDCTxtbl[offset][idx]);
- out_be32(mcrcst_port, JCSTWTxtbl[offset][idx]);
- out_be32(tdvhsel_port,
- (in_be32(tdvhsel_port) & ~TDVHSEL_MASTER) | JCACTSELtbl[offset][idx]);
- }
- out_be32(udenvt_port,
- JCTSStbl[offset][idx] << 16 | JCENVTtbl[offset][idx]);
-}
-
-unsigned long scc_mode_filter(struct ata_device *adev, unsigned long mask)
-{
- /* errata A308 workaround: limit ATAPI UDMA mode to UDMA4 */
- if (adev->class == ATA_DEV_ATAPI &&
- (mask & (0xE0 << ATA_SHIFT_UDMA))) {
- printk(KERN_INFO "%s: limit ATAPI UDMA to UDMA4\n", DRV_NAME);
- mask &= ~(0xE0 << ATA_SHIFT_UDMA);
- }
- return mask;
-}
-
-/**
- * scc_tf_load - send taskfile registers to host controller
- * @ap: Port to which output is sent
- * @tf: ATA taskfile register set
- *
- * Note: Original code is ata_sff_tf_load().
- */
-
-static void scc_tf_load (struct ata_port *ap, const struct ata_taskfile *tf)
-{
- struct ata_ioports *ioaddr = &ap->ioaddr;
- unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
-
- if (tf->ctl != ap->last_ctl) {
- out_be32(ioaddr->ctl_addr, tf->ctl);
- ap->last_ctl = tf->ctl;
- ata_wait_idle(ap);
- }
-
- if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
- out_be32(ioaddr->feature_addr, tf->hob_feature);
- out_be32(ioaddr->nsect_addr, tf->hob_nsect);
- out_be32(ioaddr->lbal_addr, tf->hob_lbal);
- out_be32(ioaddr->lbam_addr, tf->hob_lbam);
- out_be32(ioaddr->lbah_addr, tf->hob_lbah);
- VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n",
- tf->hob_feature,
- tf->hob_nsect,
- tf->hob_lbal,
- tf->hob_lbam,
- tf->hob_lbah);
- }
-
- if (is_addr) {
- out_be32(ioaddr->feature_addr, tf->feature);
- out_be32(ioaddr->nsect_addr, tf->nsect);
- out_be32(ioaddr->lbal_addr, tf->lbal);
- out_be32(ioaddr->lbam_addr, tf->lbam);
- out_be32(ioaddr->lbah_addr, tf->lbah);
- VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n",
- tf->feature,
- tf->nsect,
- tf->lbal,
- tf->lbam,
- tf->lbah);
- }
-
- if (tf->flags & ATA_TFLAG_DEVICE) {
- out_be32(ioaddr->device_addr, tf->device);
- VPRINTK("device 0x%X\n", tf->device);
- }
-
- ata_wait_idle(ap);
-}
-
-/**
- * scc_check_status - Read device status reg & clear interrupt
- * @ap: port where the device is
- *
- * Note: Original code is ata_check_status().
- */
-
-static u8 scc_check_status (struct ata_port *ap)
-{
- return in_be32(ap->ioaddr.status_addr);
-}
-
-/**
- * scc_tf_read - input device's ATA taskfile shadow registers
- * @ap: Port from which input is read
- * @tf: ATA taskfile register set for storing input
- *
- * Note: Original code is ata_sff_tf_read().
- */
-
-static void scc_tf_read (struct ata_port *ap, struct ata_taskfile *tf)
-{
- struct ata_ioports *ioaddr = &ap->ioaddr;
-
- tf->command = scc_check_status(ap);
- tf->feature = in_be32(ioaddr->error_addr);
- tf->nsect = in_be32(ioaddr->nsect_addr);
- tf->lbal = in_be32(ioaddr->lbal_addr);
- tf->lbam = in_be32(ioaddr->lbam_addr);
- tf->lbah = in_be32(ioaddr->lbah_addr);
- tf->device = in_be32(ioaddr->device_addr);
-
- if (tf->flags & ATA_TFLAG_LBA48) {
- out_be32(ioaddr->ctl_addr, tf->ctl | ATA_HOB);
- tf->hob_feature = in_be32(ioaddr->error_addr);
- tf->hob_nsect = in_be32(ioaddr->nsect_addr);
- tf->hob_lbal = in_be32(ioaddr->lbal_addr);
- tf->hob_lbam = in_be32(ioaddr->lbam_addr);
- tf->hob_lbah = in_be32(ioaddr->lbah_addr);
- out_be32(ioaddr->ctl_addr, tf->ctl);
- ap->last_ctl = tf->ctl;
- }
-}
-
-/**
- * scc_exec_command - issue ATA command to host controller
- * @ap: port to which command is being issued
- * @tf: ATA taskfile register set
- *
- * Note: Original code is ata_sff_exec_command().
- */
-
-static void scc_exec_command (struct ata_port *ap,
- const struct ata_taskfile *tf)
-{
- DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command);
-
- out_be32(ap->ioaddr.command_addr, tf->command);
- ata_sff_pause(ap);
-}
-
-/**
- * scc_check_altstatus - Read device alternate status reg
- * @ap: port where the device is
- */
-
-static u8 scc_check_altstatus (struct ata_port *ap)
-{
- return in_be32(ap->ioaddr.altstatus_addr);
-}
-
-/**
- * scc_dev_select - Select device 0/1 on ATA bus
- * @ap: ATA channel to manipulate
- * @device: ATA device (numbered from zero) to select
- *
- * Note: Original code is ata_sff_dev_select().
- */
-
-static void scc_dev_select (struct ata_port *ap, unsigned int device)
-{
- u8 tmp;
-
- if (device == 0)
- tmp = ATA_DEVICE_OBS;
- else
- tmp = ATA_DEVICE_OBS | ATA_DEV1;
-
- out_be32(ap->ioaddr.device_addr, tmp);
- ata_sff_pause(ap);
-}
-
-/**
- * scc_set_devctl - Write device control reg
- * @ap: port where the device is
- * @ctl: value to write
- */
-
-static void scc_set_devctl(struct ata_port *ap, u8 ctl)
-{
- out_be32(ap->ioaddr.ctl_addr, ctl);
-}
-
-/**
- * scc_bmdma_setup - Set up PCI IDE BMDMA transaction
- * @qc: Info associated with this ATA transaction.
- *
- * Note: Original code is ata_bmdma_setup().
- */
-
-static void scc_bmdma_setup (struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE);
- u8 dmactl;
- void __iomem *mmio = ap->ioaddr.bmdma_addr;
-
- /* load PRD table addr */
- out_be32(mmio + SCC_DMA_TABLE_OFS, ap->bmdma_prd_dma);
-
- /* specify data direction, triple-check start bit is clear */
- dmactl = in_be32(mmio + SCC_DMA_CMD);
- dmactl &= ~(ATA_DMA_WR | ATA_DMA_START);
- if (!rw)
- dmactl |= ATA_DMA_WR;
- out_be32(mmio + SCC_DMA_CMD, dmactl);
-
- /* issue r/w command */
- ap->ops->sff_exec_command(ap, &qc->tf);
-}
-
-/**
- * scc_bmdma_start - Start a PCI IDE BMDMA transaction
- * @qc: Info associated with this ATA transaction.
- *
- * Note: Original code is ata_bmdma_start().
- */
-
-static void scc_bmdma_start (struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- u8 dmactl;
- void __iomem *mmio = ap->ioaddr.bmdma_addr;
-
- /* start host DMA transaction */
- dmactl = in_be32(mmio + SCC_DMA_CMD);
- out_be32(mmio + SCC_DMA_CMD, dmactl | ATA_DMA_START);
-}
-
-/**
- * scc_devchk - PATA device presence detection
- * @ap: ATA channel to examine
- * @device: Device to examine (starting at zero)
- *
- * Note: Original code is ata_devchk().
- */
-
-static unsigned int scc_devchk (struct ata_port *ap,
- unsigned int device)
-{
- struct ata_ioports *ioaddr = &ap->ioaddr;
- u8 nsect, lbal;
-
- ap->ops->sff_dev_select(ap, device);
-
- out_be32(ioaddr->nsect_addr, 0x55);
- out_be32(ioaddr->lbal_addr, 0xaa);
-
- out_be32(ioaddr->nsect_addr, 0xaa);
- out_be32(ioaddr->lbal_addr, 0x55);
-
- out_be32(ioaddr->nsect_addr, 0x55);
- out_be32(ioaddr->lbal_addr, 0xaa);
-
- nsect = in_be32(ioaddr->nsect_addr);
- lbal = in_be32(ioaddr->lbal_addr);
-
- if ((nsect == 0x55) && (lbal == 0xaa))
- return 1; /* we found a device */
-
- return 0; /* nothing found */
-}
-
-/**
- * scc_wait_after_reset - wait for devices to become ready after reset
- *
- * Note: Original code is ata_sff_wait_after_reset
- */
-
-static int scc_wait_after_reset(struct ata_link *link, unsigned int devmask,
- unsigned long deadline)
-{
- struct ata_port *ap = link->ap;
- struct ata_ioports *ioaddr = &ap->ioaddr;
- unsigned int dev0 = devmask & (1 << 0);
- unsigned int dev1 = devmask & (1 << 1);
- int rc, ret = 0;
-
- /* Spec mandates ">= 2ms" before checking status. We wait
- * 150ms, because that was the magic delay used for ATAPI
- * devices in Hale Landis's ATADRVR, for the period of time
- * between when the ATA command register is written, and then
- * status is checked. Because waiting for "a while" before
- * checking status is fine, post SRST, we perform this magic
- * delay here as well.
- *
- * Old drivers/ide uses the 2mS rule and then waits for ready.
- */
- ata_msleep(ap, 150);
-
- /* always check readiness of the master device */
- rc = ata_sff_wait_ready(link, deadline);
- /* -ENODEV means the odd clown forgot the D7 pulldown resistor
- * and TF status is 0xff, bail out on it too.
- */
- if (rc)
- return rc;
-
- /* if device 1 was found in ata_devchk, wait for register
- * access briefly, then wait for BSY to clear.
- */
- if (dev1) {
- int i;
-
- ap->ops->sff_dev_select(ap, 1);
-
- /* Wait for register access. Some ATAPI devices fail
- * to set nsect/lbal after reset, so don't waste too
- * much time on it. We're gonna wait for !BSY anyway.
- */
- for (i = 0; i < 2; i++) {
- u8 nsect, lbal;
-
- nsect = in_be32(ioaddr->nsect_addr);
- lbal = in_be32(ioaddr->lbal_addr);
- if ((nsect == 1) && (lbal == 1))
- break;
- ata_msleep(ap, 50); /* give drive a breather */
- }
-
- rc = ata_sff_wait_ready(link, deadline);
- if (rc) {
- if (rc != -ENODEV)
- return rc;
- ret = rc;
- }
- }
-
- /* is all this really necessary? */
- ap->ops->sff_dev_select(ap, 0);
- if (dev1)
- ap->ops->sff_dev_select(ap, 1);
- if (dev0)
- ap->ops->sff_dev_select(ap, 0);
-
- return ret;
-}
-
-/**
- * scc_bus_softreset - PATA device software reset
- *
- * Note: Original code is ata_bus_softreset().
- */
-
-static int scc_bus_softreset(struct ata_port *ap, unsigned int devmask,
- unsigned long deadline)
-{
- struct ata_ioports *ioaddr = &ap->ioaddr;
-
- DPRINTK("ata%u: bus reset via SRST\n", ap->print_id);
-
- /* software reset. causes dev0 to be selected */
- out_be32(ioaddr->ctl_addr, ap->ctl);
- udelay(20);
- out_be32(ioaddr->ctl_addr, ap->ctl | ATA_SRST);
- udelay(20);
- out_be32(ioaddr->ctl_addr, ap->ctl);
-
- return scc_wait_after_reset(&ap->link, devmask, deadline);
-}
-
-/**
- * scc_softreset - reset host port via ATA SRST
- * @ap: port to reset
- * @classes: resulting classes of attached devices
- * @deadline: deadline jiffies for the operation
- *
- * Note: Original code is ata_sff_softreset().
- */
-
-static int scc_softreset(struct ata_link *link, unsigned int *classes,
- unsigned long deadline)
-{
- struct ata_port *ap = link->ap;
- unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
- unsigned int devmask = 0;
- int rc;
- u8 err;
-
- DPRINTK("ENTER\n");
-
- /* determine if device 0/1 are present */
- if (scc_devchk(ap, 0))
- devmask |= (1 << 0);
- if (slave_possible && scc_devchk(ap, 1))
- devmask |= (1 << 1);
-
- /* select device 0 again */
- ap->ops->sff_dev_select(ap, 0);
-
- /* issue bus reset */
- DPRINTK("about to softreset, devmask=%x\n", devmask);
- rc = scc_bus_softreset(ap, devmask, deadline);
- if (rc) {
- ata_port_err(ap, "SRST failed (err_mask=0x%x)\n", rc);
- return -EIO;
- }
-
- /* determine by signature whether we have ATA or ATAPI devices */
- classes[0] = ata_sff_dev_classify(&ap->link.device[0],
- devmask & (1 << 0), &err);
- if (slave_possible && err != 0x81)
- classes[1] = ata_sff_dev_classify(&ap->link.device[1],
- devmask & (1 << 1), &err);
-
- DPRINTK("EXIT, classes[0]=%u [1]=%u\n", classes[0], classes[1]);
- return 0;
-}
-
-/**
- * scc_bmdma_stop - Stop PCI IDE BMDMA transfer
- * @qc: Command we are ending DMA for
- */
-
-static void scc_bmdma_stop (struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- void __iomem *ctrl_base = ap->host->iomap[SCC_CTRL_BAR];
- void __iomem *bmid_base = ap->host->iomap[SCC_BMID_BAR];
- u32 reg;
-
- while (1) {
- reg = in_be32(bmid_base + SCC_DMA_INTST);
-
- if (reg & INTSTS_SERROR) {
- printk(KERN_WARNING "%s: SERROR\n", DRV_NAME);
- out_be32(bmid_base + SCC_DMA_INTST, INTSTS_SERROR|INTSTS_BMSINT);
- out_be32(bmid_base + SCC_DMA_CMD,
- in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START);
- continue;
- }
-
- if (reg & INTSTS_PRERR) {
- u32 maea0, maec0;
- maea0 = in_be32(ctrl_base + SCC_CTL_MAEA0);
- maec0 = in_be32(ctrl_base + SCC_CTL_MAEC0);
- printk(KERN_WARNING "%s: PRERR [addr:%x cmd:%x]\n", DRV_NAME, maea0, maec0);
- out_be32(bmid_base + SCC_DMA_INTST, INTSTS_PRERR|INTSTS_BMSINT);
- out_be32(bmid_base + SCC_DMA_CMD,
- in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START);
- continue;
- }
-
- if (reg & INTSTS_RERR) {
- printk(KERN_WARNING "%s: Response Error\n", DRV_NAME);
- out_be32(bmid_base + SCC_DMA_INTST, INTSTS_RERR|INTSTS_BMSINT);
- out_be32(bmid_base + SCC_DMA_CMD,
- in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START);
- continue;
- }
-
- if (reg & INTSTS_ICERR) {
- out_be32(bmid_base + SCC_DMA_CMD,
- in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START);
- printk(KERN_WARNING "%s: Illegal Configuration\n", DRV_NAME);
- out_be32(bmid_base + SCC_DMA_INTST, INTSTS_ICERR|INTSTS_BMSINT);
- continue;
- }
-
- if (reg & INTSTS_BMSINT) {
- unsigned int classes;
- unsigned long deadline = ata_deadline(jiffies, ATA_TMOUT_BOOT);
- printk(KERN_WARNING "%s: Internal Bus Error\n", DRV_NAME);
- out_be32(bmid_base + SCC_DMA_INTST, INTSTS_BMSINT);
- /* TBD: SW reset */
- scc_softreset(&ap->link, &classes, deadline);
- continue;
- }
-
- if (reg & INTSTS_BMHE) {
- out_be32(bmid_base + SCC_DMA_INTST, INTSTS_BMHE);
- continue;
- }
-
- if (reg & INTSTS_ACTEINT) {
- out_be32(bmid_base + SCC_DMA_INTST, INTSTS_ACTEINT);
- continue;
- }
-
- if (reg & INTSTS_IOIRQS) {
- out_be32(bmid_base + SCC_DMA_INTST, INTSTS_IOIRQS);
- continue;
- }
- break;
- }
-
- /* clear start/stop bit */
- out_be32(bmid_base + SCC_DMA_CMD,
- in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START);
-
- /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
- ata_sff_dma_pause(ap); /* dummy read */
-}
-
-/**
- * scc_bmdma_status - Read PCI IDE BMDMA status
- * @ap: Port associated with this ATA transaction.
- */
-
-static u8 scc_bmdma_status (struct ata_port *ap)
-{
- void __iomem *mmio = ap->ioaddr.bmdma_addr;
- u8 host_stat = in_be32(mmio + SCC_DMA_STATUS);
- u32 int_status = in_be32(mmio + SCC_DMA_INTST);
- struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->link.active_tag);
- static int retry = 0;
-
- /* return if IOS_SS is cleared */
- if (!(in_be32(mmio + SCC_DMA_CMD) & ATA_DMA_START))
- return host_stat;
-
- /* errata A252,A308 workaround: Step4 */
- if ((scc_check_altstatus(ap) & ATA_ERR)
- && (int_status & INTSTS_INTRQ))
- return (host_stat | ATA_DMA_INTR);
-
- /* errata A308 workaround Step5 */
- if (int_status & INTSTS_IOIRQS) {
- host_stat |= ATA_DMA_INTR;
-
- /* We don't check ATAPI DMA because it is limited to UDMA4 */
- if ((qc->tf.protocol == ATA_PROT_DMA &&
- qc->dev->xfer_mode > XFER_UDMA_4)) {
- if (!(int_status & INTSTS_ACTEINT)) {
- printk(KERN_WARNING "ata%u: operation failed (transfer data loss)\n",
- ap->print_id);
- host_stat |= ATA_DMA_ERR;
- if (retry++)
- ap->udma_mask &= ~(1 << qc->dev->xfer_mode);
- } else
- retry = 0;
- }
- }
-
- return host_stat;
-}
-
-/**
- * scc_data_xfer - Transfer data by PIO
- * @dev: device for this I/O
- * @buf: data buffer
- * @buflen: buffer length
- * @rw: read/write
- *
- * Note: Original code is ata_sff_data_xfer().
- */
-
-static unsigned int scc_data_xfer (struct ata_device *dev, unsigned char *buf,
- unsigned int buflen, int rw)
-{
- struct ata_port *ap = dev->link->ap;
- unsigned int words = buflen >> 1;
- unsigned int i;
- __le16 *buf16 = (__le16 *) buf;
- void __iomem *mmio = ap->ioaddr.data_addr;
-
- /* Transfer multiple of 2 bytes */
- if (rw == READ)
- for (i = 0; i < words; i++)
- buf16[i] = cpu_to_le16(in_be32(mmio));
- else
- for (i = 0; i < words; i++)
- out_be32(mmio, le16_to_cpu(buf16[i]));
-
- /* Transfer trailing 1 byte, if any. */
- if (unlikely(buflen & 0x01)) {
- __le16 align_buf[1] = { 0 };
- unsigned char *trailing_buf = buf + buflen - 1;
-
- if (rw == READ) {
- align_buf[0] = cpu_to_le16(in_be32(mmio));
- memcpy(trailing_buf, align_buf, 1);
- } else {
- memcpy(align_buf, trailing_buf, 1);
- out_be32(mmio, le16_to_cpu(align_buf[0]));
- }
- words++;
- }
-
- return words << 1;
-}
-
-/**
- * scc_postreset - standard postreset callback
- * @ap: the target ata_port
- * @classes: classes of attached devices
- *
- * Note: Original code is ata_sff_postreset().
- */
-
-static void scc_postreset(struct ata_link *link, unsigned int *classes)
-{
- struct ata_port *ap = link->ap;
-
- DPRINTK("ENTER\n");
-
- /* is double-select really necessary? */
- if (classes[0] != ATA_DEV_NONE)
- ap->ops->sff_dev_select(ap, 1);
- if (classes[1] != ATA_DEV_NONE)
- ap->ops->sff_dev_select(ap, 0);
-
- /* bail out if no device is present */
- if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) {
- DPRINTK("EXIT, no device\n");
- return;
- }
-
- /* set up device control */
- out_be32(ap->ioaddr.ctl_addr, ap->ctl);
-
- DPRINTK("EXIT\n");
-}
-
-/**
- * scc_irq_clear - Clear PCI IDE BMDMA interrupt.
- * @ap: Port associated with this ATA transaction.
- *
- * Note: Original code is ata_bmdma_irq_clear().
- */
-
-static void scc_irq_clear (struct ata_port *ap)
-{
- void __iomem *mmio = ap->ioaddr.bmdma_addr;
-
- if (!mmio)
- return;
-
- out_be32(mmio + SCC_DMA_STATUS, in_be32(mmio + SCC_DMA_STATUS));
-}
-
-/**
- * scc_port_start - Set port up for dma.
- * @ap: Port to initialize
- *
- * Allocate space for PRD table using ata_bmdma_port_start().
- * Set PRD table address for PTERADD. (PRD Transfer End Read)
- */
-
-static int scc_port_start (struct ata_port *ap)
-{
- void __iomem *mmio = ap->ioaddr.bmdma_addr;
- int rc;
-
- rc = ata_bmdma_port_start(ap);
- if (rc)
- return rc;
-
- out_be32(mmio + SCC_DMA_PTERADD, ap->bmdma_prd_dma);
- return 0;
-}
-
-/**
- * scc_port_stop - Undo scc_port_start()
- * @ap: Port to shut down
- *
- * Reset PTERADD.
- */
-
-static void scc_port_stop (struct ata_port *ap)
-{
- void __iomem *mmio = ap->ioaddr.bmdma_addr;
-
- out_be32(mmio + SCC_DMA_PTERADD, 0);
-}
-
-static struct scsi_host_template scc_sht = {
- ATA_BMDMA_SHT(DRV_NAME),
-};
-
-static struct ata_port_operations scc_pata_ops = {
- .inherits = &ata_bmdma_port_ops,
-
- .set_piomode = scc_set_piomode,
- .set_dmamode = scc_set_dmamode,
- .mode_filter = scc_mode_filter,
-
- .sff_tf_load = scc_tf_load,
- .sff_tf_read = scc_tf_read,
- .sff_exec_command = scc_exec_command,
- .sff_check_status = scc_check_status,
- .sff_check_altstatus = scc_check_altstatus,
- .sff_dev_select = scc_dev_select,
- .sff_set_devctl = scc_set_devctl,
-
- .bmdma_setup = scc_bmdma_setup,
- .bmdma_start = scc_bmdma_start,
- .bmdma_stop = scc_bmdma_stop,
- .bmdma_status = scc_bmdma_status,
- .sff_data_xfer = scc_data_xfer,
-
- .cable_detect = ata_cable_80wire,
- .softreset = scc_softreset,
- .postreset = scc_postreset,
-
- .sff_irq_clear = scc_irq_clear,
-
- .port_start = scc_port_start,
- .port_stop = scc_port_stop,
-};
-
-static struct ata_port_info scc_port_info[] = {
- {
- .flags = ATA_FLAG_SLAVE_POSS,
- .pio_mask = ATA_PIO4,
- /* No MWDMA */
- .udma_mask = ATA_UDMA6,
- .port_ops = &scc_pata_ops,
- },
-};
-
-/**
- * scc_reset_controller - initialize SCC PATA controller.
- */
-
-static int scc_reset_controller(struct ata_host *host)
-{
- void __iomem *ctrl_base = host->iomap[SCC_CTRL_BAR];
- void __iomem *bmid_base = host->iomap[SCC_BMID_BAR];
- void __iomem *cckctrl_port = ctrl_base + SCC_CTL_CCKCTRL;
- void __iomem *mode_port = ctrl_base + SCC_CTL_MODEREG;
- void __iomem *ecmode_port = ctrl_base + SCC_CTL_ECMODE;
- void __iomem *intmask_port = bmid_base + SCC_DMA_INTMASK;
- void __iomem *dmastatus_port = bmid_base + SCC_DMA_STATUS;
- u32 reg = 0;
-
- out_be32(cckctrl_port, reg);
- reg |= CCKCTRL_ATACLKOEN;
- out_be32(cckctrl_port, reg);
- reg |= CCKCTRL_LCLKEN | CCKCTRL_OCLKEN;
- out_be32(cckctrl_port, reg);
- reg |= CCKCTRL_CRST;
- out_be32(cckctrl_port, reg);
-
- for (;;) {
- reg = in_be32(cckctrl_port);
- if (reg & CCKCTRL_CRST)
- break;
- udelay(5000);
- }
-
- reg |= CCKCTRL_ATARESET;
- out_be32(cckctrl_port, reg);
- out_be32(ecmode_port, ECMODE_VALUE);
- out_be32(mode_port, MODE_JCUSFEN);
- out_be32(intmask_port, INTMASK_MSK);
-
- if (in_be32(dmastatus_port) & QCHSD_STPDIAG) {
- printk(KERN_WARNING "%s: failed to detect 80c cable. (PDIAG# is high)\n", DRV_NAME);
- return -EIO;
- }
-
- return 0;
-}
-
-/**
- * scc_setup_ports - initialize ioaddr with SCC PATA port offsets.
- * @ioaddr: IO address structure to be initialized
- * @base: base address of BMID region
- */
-
-static void scc_setup_ports (struct ata_ioports *ioaddr, void __iomem *base)
-{
- ioaddr->cmd_addr = base + SCC_REG_CMD_ADDR;
- ioaddr->altstatus_addr = ioaddr->cmd_addr + SCC_REG_ALTSTATUS;
- ioaddr->ctl_addr = ioaddr->cmd_addr + SCC_REG_ALTSTATUS;
- ioaddr->bmdma_addr = base;
- ioaddr->data_addr = ioaddr->cmd_addr + SCC_REG_DATA;
- ioaddr->error_addr = ioaddr->cmd_addr + SCC_REG_ERR;
- ioaddr->feature_addr = ioaddr->cmd_addr + SCC_REG_FEATURE;
- ioaddr->nsect_addr = ioaddr->cmd_addr + SCC_REG_NSECT;
- ioaddr->lbal_addr = ioaddr->cmd_addr + SCC_REG_LBAL;
- ioaddr->lbam_addr = ioaddr->cmd_addr + SCC_REG_LBAM;
- ioaddr->lbah_addr = ioaddr->cmd_addr + SCC_REG_LBAH;
- ioaddr->device_addr = ioaddr->cmd_addr + SCC_REG_DEVICE;
- ioaddr->status_addr = ioaddr->cmd_addr + SCC_REG_STATUS;
- ioaddr->command_addr = ioaddr->cmd_addr + SCC_REG_CMD;
-}
-
-static int scc_host_init(struct ata_host *host)
-{
- struct pci_dev *pdev = to_pci_dev(host->dev);
- int rc;
-
- rc = scc_reset_controller(host);
- if (rc)
- return rc;
-
- rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK);
- if (rc)
- return rc;
- rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK);
- if (rc)
- return rc;
-
- scc_setup_ports(&host->ports[0]->ioaddr, host->iomap[SCC_BMID_BAR]);
-
- pci_set_master(pdev);
-
- return 0;
-}
-
-/**
- * scc_init_one - Register SCC PATA device with kernel services
- * @pdev: PCI device to register
- * @ent: Entry in scc_pci_tbl matching with @pdev
- *
- * LOCKING:
- * Inherited from PCI layer (may sleep).
- *
- * RETURNS:
- * Zero on success, or -ERRNO value.
- */
-
-static int scc_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
-{
- unsigned int board_idx = (unsigned int) ent->driver_data;
- const struct ata_port_info *ppi[] = { &scc_port_info[board_idx], NULL };
- struct ata_host *host;
- int rc;
-
- ata_print_version_once(&pdev->dev, DRV_VERSION);
-
- host = ata_host_alloc_pinfo(&pdev->dev, ppi, 1);
- if (!host)
- return -ENOMEM;
-
- rc = pcim_enable_device(pdev);
- if (rc)
- return rc;
-
- rc = pcim_iomap_regions(pdev, (1 << SCC_CTRL_BAR) | (1 << SCC_BMID_BAR), DRV_NAME);
- if (rc == -EBUSY)
- pcim_pin_device(pdev);
- if (rc)
- return rc;
- host->iomap = pcim_iomap_table(pdev);
-
- ata_port_pbar_desc(host->ports[0], SCC_CTRL_BAR, -1, "ctrl");
- ata_port_pbar_desc(host->ports[0], SCC_BMID_BAR, -1, "bmid");
-
- rc = scc_host_init(host);
- if (rc)
- return rc;
-
- return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
- IRQF_SHARED, &scc_sht);
-}
-
-static struct pci_driver scc_pci_driver = {
- .name = DRV_NAME,
- .id_table = scc_pci_tbl,
- .probe = scc_init_one,
- .remove = ata_pci_remove_one,
-#ifdef CONFIG_PM_SLEEP
- .suspend = ata_pci_device_suspend,
- .resume = ata_pci_device_resume,
-#endif
-};
-
-module_pci_driver(scc_pci_driver);
-
-MODULE_AUTHOR("Toshiba corp");
-MODULE_DESCRIPTION("SCSI low-level driver for Toshiba SCC PATA controller");
-MODULE_LICENSE("GPL");
-MODULE_DEVICE_TABLE(pci, scc_pci_tbl);
-MODULE_VERSION(DRV_VERSION);