summaryrefslogtreecommitdiff
path: root/drivers/block/cciss.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/block/cciss.c')
-rw-r--r--drivers/block/cciss.c544
1 files changed, 261 insertions, 283 deletions
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 92b126394fa1..873e594860d3 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -179,19 +179,17 @@ static int rebuild_lun_table(ctlr_info_t *h, int first_time, int via_ioctl);
static int deregister_disk(ctlr_info_t *h, int drv_index,
int clear_all, int via_ioctl);
-static void cciss_read_capacity(int ctlr, int logvol, int withirq,
+static void cciss_read_capacity(int ctlr, int logvol,
sector_t *total_size, unsigned int *block_size);
-static void cciss_read_capacity_16(int ctlr, int logvol, int withirq,
+static void cciss_read_capacity_16(int ctlr, int logvol,
sector_t *total_size, unsigned int *block_size);
static void cciss_geometry_inquiry(int ctlr, int logvol,
- int withirq, sector_t total_size,
+ sector_t total_size,
unsigned int block_size, InquiryData_struct *inq_buff,
drive_info_struct *drv);
static void __devinit cciss_interrupt_mode(ctlr_info_t *, struct pci_dev *,
__u32);
static void start_io(ctlr_info_t *h);
-static int sendcmd(__u8 cmd, int ctlr, void *buff, size_t size,
- __u8 page_code, unsigned char *scsi3addr, int cmd_type);
static int sendcmd_withirq(__u8 cmd, int ctlr, void *buff, size_t size,
__u8 page_code, unsigned char scsi3addr[],
int cmd_type);
@@ -424,12 +422,9 @@ cciss_proc_write(struct file *file, const char __user *buf,
if (strncmp(ENGAGE_SCSI, buffer, sizeof ENGAGE_SCSI - 1) == 0) {
struct seq_file *seq = file->private_data;
ctlr_info_t *h = seq->private;
- int rc;
- rc = cciss_engage_scsi(h->ctlr);
- if (rc != 0)
- err = -rc;
- else
+ err = cciss_engage_scsi(h->ctlr);
+ if (err == 0)
err = length;
} else
#endif /* CONFIG_CISS_SCSI_TAPE */
@@ -1657,9 +1652,11 @@ static void cciss_softirq_done(struct request *rq)
{
CommandList_struct *cmd = rq->completion_data;
ctlr_info_t *h = hba[cmd->ctlr];
+ SGDescriptor_struct *curr_sg = cmd->SG;
unsigned long flags;
u64bit temp64;
int i, ddir;
+ int sg_index = 0;
if (cmd->Request.Type.Direction == XFER_READ)
ddir = PCI_DMA_FROMDEVICE;
@@ -1669,9 +1666,22 @@ static void cciss_softirq_done(struct request *rq)
/* command did not need to be retried */
/* unmap the DMA mapping for all the scatter gather elements */
for (i = 0; i < cmd->Header.SGList; i++) {
- temp64.val32.lower = cmd->SG[i].Addr.lower;
- temp64.val32.upper = cmd->SG[i].Addr.upper;
- pci_unmap_page(h->pdev, temp64.val, cmd->SG[i].Len, ddir);
+ if (curr_sg[sg_index].Ext == CCISS_SG_CHAIN) {
+ temp64.val32.lower = cmd->SG[i].Addr.lower;
+ temp64.val32.upper = cmd->SG[i].Addr.upper;
+ pci_dma_sync_single_for_cpu(h->pdev, temp64.val,
+ cmd->SG[i].Len, ddir);
+ pci_unmap_single(h->pdev, temp64.val,
+ cmd->SG[i].Len, ddir);
+ /* Point to the next block */
+ curr_sg = h->cmd_sg_list[cmd->cmdindex]->sgchain;
+ sg_index = 0;
+ }
+ temp64.val32.lower = curr_sg[sg_index].Addr.lower;
+ temp64.val32.upper = curr_sg[sg_index].Addr.upper;
+ pci_unmap_page(h->pdev, temp64.val, curr_sg[sg_index].Len,
+ ddir);
+ ++sg_index;
}
#ifdef CCISS_DEBUG
@@ -1701,7 +1711,7 @@ static inline void log_unit_to_scsi3addr(ctlr_info_t *h,
* via the inquiry page 0. Model, vendor, and rev are set to empty strings if
* they cannot be read.
*/
-static void cciss_get_device_descr(int ctlr, int logvol, int withirq,
+static void cciss_get_device_descr(int ctlr, int logvol,
char *vendor, char *model, char *rev)
{
int rc;
@@ -1717,14 +1727,8 @@ static void cciss_get_device_descr(int ctlr, int logvol, int withirq,
return;
log_unit_to_scsi3addr(hba[ctlr], scsi3addr, logvol);
- if (withirq)
- rc = sendcmd_withirq(CISS_INQUIRY, ctlr, inq_buf,
- sizeof(InquiryData_struct), 0,
- scsi3addr, TYPE_CMD);
- else
- rc = sendcmd(CISS_INQUIRY, ctlr, inq_buf,
- sizeof(InquiryData_struct), 0,
- scsi3addr, TYPE_CMD);
+ rc = sendcmd_withirq(CISS_INQUIRY, ctlr, inq_buf, sizeof(*inq_buf), 0,
+ scsi3addr, TYPE_CMD);
if (rc == IO_OK) {
memcpy(vendor, &inq_buf->data_byte[8], VENDOR_LEN);
vendor[VENDOR_LEN] = '\0';
@@ -1743,7 +1747,7 @@ static void cciss_get_device_descr(int ctlr, int logvol, int withirq,
* number cannot be had, for whatever reason, 16 bytes of 0xff
* are returned instead.
*/
-static void cciss_get_serial_no(int ctlr, int logvol, int withirq,
+static void cciss_get_serial_no(int ctlr, int logvol,
unsigned char *serial_no, int buflen)
{
#define PAGE_83_INQ_BYTES 64
@@ -1759,12 +1763,8 @@ static void cciss_get_serial_no(int ctlr, int logvol, int withirq,
return;
memset(serial_no, 0, buflen);
log_unit_to_scsi3addr(hba[ctlr], scsi3addr, logvol);
- if (withirq)
- rc = sendcmd_withirq(CISS_INQUIRY, ctlr, buf,
- PAGE_83_INQ_BYTES, 0x83, scsi3addr, TYPE_CMD);
- else
- rc = sendcmd(CISS_INQUIRY, ctlr, buf,
- PAGE_83_INQ_BYTES, 0x83, scsi3addr, TYPE_CMD);
+ rc = sendcmd_withirq(CISS_INQUIRY, ctlr, buf,
+ PAGE_83_INQ_BYTES, 0x83, scsi3addr, TYPE_CMD);
if (rc == IO_OK)
memcpy(serial_no, &buf[8], buflen);
kfree(buf);
@@ -1793,10 +1793,10 @@ static int cciss_add_disk(ctlr_info_t *h, struct gendisk *disk,
blk_queue_bounce_limit(disk->queue, h->pdev->dma_mask);
/* This is a hardware imposed limit. */
- blk_queue_max_hw_segments(disk->queue, MAXSGENTRIES);
+ blk_queue_max_hw_segments(disk->queue, h->maxsgentries);
/* This is a limit in the driver and could be eliminated. */
- blk_queue_max_phys_segments(disk->queue, MAXSGENTRIES);
+ blk_queue_max_phys_segments(disk->queue, h->maxsgentries);
blk_queue_max_sectors(disk->queue, h->cciss_max_sectors);
@@ -1852,18 +1852,16 @@ static void cciss_update_drive_info(int ctlr, int drv_index, int first_time,
/* testing to see if 16-byte CDBs are already being used */
if (h->cciss_read == CCISS_READ_16) {
- cciss_read_capacity_16(h->ctlr, drv_index, 1,
+ cciss_read_capacity_16(h->ctlr, drv_index,
&total_size, &block_size);
} else {
- cciss_read_capacity(ctlr, drv_index, 1,
- &total_size, &block_size);
-
+ cciss_read_capacity(ctlr, drv_index, &total_size, &block_size);
/* if read_capacity returns all F's this volume is >2TB */
/* in size so we switch to 16-byte CDB's for all */
/* read/write ops */
if (total_size == 0xFFFFFFFFULL) {
- cciss_read_capacity_16(ctlr, drv_index, 1,
+ cciss_read_capacity_16(ctlr, drv_index,
&total_size, &block_size);
h->cciss_read = CCISS_READ_16;
h->cciss_write = CCISS_WRITE_16;
@@ -1873,14 +1871,14 @@ static void cciss_update_drive_info(int ctlr, int drv_index, int first_time,
}
}
- cciss_geometry_inquiry(ctlr, drv_index, 1, total_size, block_size,
+ cciss_geometry_inquiry(ctlr, drv_index, total_size, block_size,
inq_buff, drvinfo);
drvinfo->block_size = block_size;
drvinfo->nr_blocks = total_size + 1;
- cciss_get_device_descr(ctlr, drv_index, 1, drvinfo->vendor,
+ cciss_get_device_descr(ctlr, drv_index, drvinfo->vendor,
drvinfo->model, drvinfo->rev);
- cciss_get_serial_no(ctlr, drv_index, 1, drvinfo->serial_no,
+ cciss_get_serial_no(ctlr, drv_index, drvinfo->serial_no,
sizeof(drvinfo->serial_no));
/* Save the lunid in case we deregister the disk, below. */
memcpy(drvinfo->LunID, h->drv[drv_index]->LunID,
@@ -2531,6 +2529,8 @@ static int check_target_status(ctlr_info_t *h, CommandList_struct *c)
case 0: return IO_OK; /* no sense */
case 1: return IO_OK; /* recovered error */
default:
+ if (check_for_unit_attention(h, c))
+ return IO_NEEDS_RETRY;
printk(KERN_WARNING "cciss%d: cmd 0x%02x "
"check condition, sense key = 0x%02x\n",
h->ctlr, c->Request.CDB[0],
@@ -2672,7 +2672,7 @@ static int sendcmd_withirq(__u8 cmd, int ctlr, void *buff, size_t size,
}
static void cciss_geometry_inquiry(int ctlr, int logvol,
- int withirq, sector_t total_size,
+ sector_t total_size,
unsigned int block_size,
InquiryData_struct *inq_buff,
drive_info_struct *drv)
@@ -2683,14 +2683,8 @@ static void cciss_geometry_inquiry(int ctlr, int logvol,
memset(inq_buff, 0, sizeof(InquiryData_struct));
log_unit_to_scsi3addr(hba[ctlr], scsi3addr, logvol);
- if (withirq)
- return_code = sendcmd_withirq(CISS_INQUIRY, ctlr,
- inq_buff, sizeof(*inq_buff),
- 0xC1, scsi3addr, TYPE_CMD);
- else
- return_code = sendcmd(CISS_INQUIRY, ctlr, inq_buff,
- sizeof(*inq_buff), 0xC1, scsi3addr,
- TYPE_CMD);
+ return_code = sendcmd_withirq(CISS_INQUIRY, ctlr, inq_buff,
+ sizeof(*inq_buff), 0xC1, scsi3addr, TYPE_CMD);
if (return_code == IO_OK) {
if (inq_buff->data_byte[8] == 0xFF) {
printk(KERN_WARNING
@@ -2723,7 +2717,7 @@ static void cciss_geometry_inquiry(int ctlr, int logvol,
}
static void
-cciss_read_capacity(int ctlr, int logvol, int withirq, sector_t *total_size,
+cciss_read_capacity(int ctlr, int logvol, sector_t *total_size,
unsigned int *block_size)
{
ReadCapdata_struct *buf;
@@ -2737,14 +2731,8 @@ cciss_read_capacity(int ctlr, int logvol, int withirq, sector_t *total_size,
}
log_unit_to_scsi3addr(hba[ctlr], scsi3addr, logvol);
- if (withirq)
- return_code = sendcmd_withirq(CCISS_READ_CAPACITY,
- ctlr, buf, sizeof(ReadCapdata_struct),
- 0, scsi3addr, TYPE_CMD);
- else
- return_code = sendcmd(CCISS_READ_CAPACITY,
- ctlr, buf, sizeof(ReadCapdata_struct),
- 0, scsi3addr, TYPE_CMD);
+ return_code = sendcmd_withirq(CCISS_READ_CAPACITY, ctlr, buf,
+ sizeof(ReadCapdata_struct), 0, scsi3addr, TYPE_CMD);
if (return_code == IO_OK) {
*total_size = be32_to_cpu(*(__be32 *) buf->total_size);
*block_size = be32_to_cpu(*(__be32 *) buf->block_size);
@@ -2756,8 +2744,8 @@ cciss_read_capacity(int ctlr, int logvol, int withirq, sector_t *total_size,
kfree(buf);
}
-static void
-cciss_read_capacity_16(int ctlr, int logvol, int withirq, sector_t *total_size, unsigned int *block_size)
+static void cciss_read_capacity_16(int ctlr, int logvol,
+ sector_t *total_size, unsigned int *block_size)
{
ReadCapdata_struct_16 *buf;
int return_code;
@@ -2770,16 +2758,9 @@ cciss_read_capacity_16(int ctlr, int logvol, int withirq, sector_t *total_size,
}
log_unit_to_scsi3addr(hba[ctlr], scsi3addr, logvol);
- if (withirq) {
- return_code = sendcmd_withirq(CCISS_READ_CAPACITY_16,
- ctlr, buf, sizeof(ReadCapdata_struct_16),
- 0, scsi3addr, TYPE_CMD);
- }
- else {
- return_code = sendcmd(CCISS_READ_CAPACITY_16,
- ctlr, buf, sizeof(ReadCapdata_struct_16),
- 0, scsi3addr, TYPE_CMD);
- }
+ return_code = sendcmd_withirq(CCISS_READ_CAPACITY_16,
+ ctlr, buf, sizeof(ReadCapdata_struct_16),
+ 0, scsi3addr, TYPE_CMD);
if (return_code == IO_OK) {
*total_size = be64_to_cpu(*(__be64 *) buf->total_size);
*block_size = be32_to_cpu(*(__be32 *) buf->block_size);
@@ -2820,13 +2801,13 @@ static int cciss_revalidate(struct gendisk *disk)
return 1;
}
if (h->cciss_read == CCISS_READ_10) {
- cciss_read_capacity(h->ctlr, logvol, 1,
+ cciss_read_capacity(h->ctlr, logvol,
&total_size, &block_size);
} else {
- cciss_read_capacity_16(h->ctlr, logvol, 1,
+ cciss_read_capacity_16(h->ctlr, logvol,
&total_size, &block_size);
}
- cciss_geometry_inquiry(h->ctlr, logvol, 1, total_size, block_size,
+ cciss_geometry_inquiry(h->ctlr, logvol, total_size, block_size,
inq_buff, drv);
blk_queue_logical_block_size(drv->queue, drv->block_size);
@@ -2837,167 +2818,6 @@ static int cciss_revalidate(struct gendisk *disk)
}
/*
- * Wait polling for a command to complete.
- * The memory mapped FIFO is polled for the completion.
- * Used only at init time, interrupts from the HBA are disabled.
- */
-static unsigned long pollcomplete(int ctlr)
-{
- unsigned long done;
- int i;
-
- /* Wait (up to 20 seconds) for a command to complete */
-
- for (i = 20 * HZ; i > 0; i--) {
- done = hba[ctlr]->access.command_completed(hba[ctlr]);
- if (done == FIFO_EMPTY)
- schedule_timeout_uninterruptible(1);
- else
- return done;
- }
- /* Invalid address to tell caller we ran out of time */
- return 1;
-}
-
-/* Send command c to controller h and poll for it to complete.
- * Turns interrupts off on the board. Used at driver init time
- * and during SCSI error recovery.
- */
-static int sendcmd_core(ctlr_info_t *h, CommandList_struct *c)
-{
- int i;
- unsigned long complete;
- int status = IO_ERROR;
- u64bit buff_dma_handle;
-
-resend_cmd1:
-
- /* Disable interrupt on the board. */
- h->access.set_intr_mask(h, CCISS_INTR_OFF);
-
- /* Make sure there is room in the command FIFO */
- /* Actually it should be completely empty at this time */
- /* unless we are in here doing error handling for the scsi */
- /* tape side of the driver. */
- for (i = 200000; i > 0; i--) {
- /* if fifo isn't full go */
- if (!(h->access.fifo_full(h)))
- break;
- udelay(10);
- printk(KERN_WARNING "cciss cciss%d: SendCmd FIFO full,"
- " waiting!\n", h->ctlr);
- }
- h->access.submit_command(h, c); /* Send the cmd */
- do {
- complete = pollcomplete(h->ctlr);
-
-#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "cciss: command completed\n");
-#endif /* CCISS_DEBUG */
-
- if (complete == 1) {
- printk(KERN_WARNING
- "cciss cciss%d: SendCmd Timeout out, "
- "No command list address returned!\n", h->ctlr);
- status = IO_ERROR;
- break;
- }
-
- /* Make sure it's the command we're expecting. */
- if ((complete & ~CISS_ERROR_BIT) != c->busaddr) {
- printk(KERN_WARNING "cciss%d: Unexpected command "
- "completion.\n", h->ctlr);
- continue;
- }
-
- /* It is our command. If no error, we're done. */
- if (!(complete & CISS_ERROR_BIT)) {
- status = IO_OK;
- break;
- }
-
- /* There is an error... */
-
- /* if data overrun or underun on Report command ignore it */
- if (((c->Request.CDB[0] == CISS_REPORT_LOG) ||
- (c->Request.CDB[0] == CISS_REPORT_PHYS) ||
- (c->Request.CDB[0] == CISS_INQUIRY)) &&
- ((c->err_info->CommandStatus == CMD_DATA_OVERRUN) ||
- (c->err_info->CommandStatus == CMD_DATA_UNDERRUN))) {
- complete = c->busaddr;
- status = IO_OK;
- break;
- }
-
- if (c->err_info->CommandStatus == CMD_UNSOLICITED_ABORT) {
- printk(KERN_WARNING "cciss%d: unsolicited abort %p\n",
- h->ctlr, c);
- if (c->retry_count < MAX_CMD_RETRIES) {
- printk(KERN_WARNING "cciss%d: retrying %p\n",
- h->ctlr, c);
- c->retry_count++;
- /* erase the old error information */
- memset(c->err_info, 0, sizeof(c->err_info));
- goto resend_cmd1;
- }
- printk(KERN_WARNING "cciss%d: retried %p too many "
- "times\n", h->ctlr, c);
- status = IO_ERROR;
- break;
- }
-
- if (c->err_info->CommandStatus == CMD_UNABORTABLE) {
- printk(KERN_WARNING "cciss%d: command could not be "
- "aborted.\n", h->ctlr);
- status = IO_ERROR;
- break;
- }
-
- if (c->err_info->CommandStatus == CMD_TARGET_STATUS) {
- status = check_target_status(h, c);
- break;
- }
-
- printk(KERN_WARNING "cciss%d: sendcmd error\n", h->ctlr);
- printk(KERN_WARNING "cmd = 0x%02x, CommandStatus = 0x%02x\n",
- c->Request.CDB[0], c->err_info->CommandStatus);
- status = IO_ERROR;
- break;
-
- } while (1);
-
- /* unlock the data buffer from DMA */
- buff_dma_handle.val32.lower = c->SG[0].Addr.lower;
- buff_dma_handle.val32.upper = c->SG[0].Addr.upper;
- pci_unmap_single(h->pdev, (dma_addr_t) buff_dma_handle.val,
- c->SG[0].Len, PCI_DMA_BIDIRECTIONAL);
- return status;
-}
-
-/*
- * Send a command to the controller, and wait for it to complete.
- * Used at init time, and during SCSI error recovery.
- */
-static int sendcmd(__u8 cmd, int ctlr, void *buff, size_t size,
- __u8 page_code, unsigned char *scsi3addr, int cmd_type)
-{
- CommandList_struct *c;
- int status;
-
- c = cmd_alloc(hba[ctlr], 1);
- if (!c) {
- printk(KERN_WARNING "cciss: unable to get memory");
- return IO_ERROR;
- }
- status = fill_cmd(c, cmd, ctlr, buff, size, page_code,
- scsi3addr, cmd_type);
- if (status == IO_OK)
- status = sendcmd_core(hba[ctlr], c);
- cmd_free(hba[ctlr], c, 1);
- return status;
-}
-
-/*
* Map (physical) PCI mem into (virtual) kernel space
*/
static void __iomem *remap_pci_mem(ulong base, ulong size)
@@ -3255,9 +3075,13 @@ static void do_cciss_request(struct request_queue *q)
int seg;
struct request *creq;
u64bit temp64;
- struct scatterlist tmp_sg[MAXSGENTRIES];
+ struct scatterlist *tmp_sg;
+ SGDescriptor_struct *curr_sg;
drive_info_struct *drv;
int i, dir;
+ int nseg = 0;
+ int sg_index = 0;
+ int chained = 0;
/* We call start_io here in case there is a command waiting on the
* queue that has not been sent.
@@ -3270,13 +3094,14 @@ static void do_cciss_request(struct request_queue *q)
if (!creq)
goto startio;
- BUG_ON(creq->nr_phys_segments > MAXSGENTRIES);
+ BUG_ON(creq->nr_phys_segments > h->maxsgentries);
if ((c = cmd_alloc(h, 1)) == NULL)
goto full;
blk_start_request(creq);
+ tmp_sg = h->scatter_list[c->cmdindex];
spin_unlock_irq(q->queue_lock);
c->cmd_type = CMD_RWREQ;
@@ -3305,7 +3130,7 @@ static void do_cciss_request(struct request_queue *q)
(int)blk_rq_pos(creq), (int)blk_rq_sectors(creq));
#endif /* CCISS_DEBUG */
- sg_init_table(tmp_sg, MAXSGENTRIES);
+ sg_init_table(tmp_sg, h->maxsgentries);
seg = blk_rq_map_sg(q, creq, tmp_sg);
/* get the DMA records for the setup */
@@ -3314,25 +3139,70 @@ static void do_cciss_request(struct request_queue *q)
else
dir = PCI_DMA_TODEVICE;
+ curr_sg = c->SG;
+ sg_index = 0;
+ chained = 0;
+
for (i = 0; i < seg; i++) {
- c->SG[i].Len = tmp_sg[i].length;
+ if (((sg_index+1) == (h->max_cmd_sgentries)) &&
+ !chained && ((seg - i) > 1)) {
+ nseg = seg - i;
+ curr_sg[sg_index].Len = (nseg) *
+ sizeof(SGDescriptor_struct);
+ curr_sg[sg_index].Ext = CCISS_SG_CHAIN;
+
+ /* Point to next chain block. */
+ curr_sg = h->cmd_sg_list[c->cmdindex]->sgchain;
+ sg_index = 0;
+ chained = 1;
+ }
+ curr_sg[sg_index].Len = tmp_sg[i].length;
temp64.val = (__u64) pci_map_page(h->pdev, sg_page(&tmp_sg[i]),
- tmp_sg[i].offset,
- tmp_sg[i].length, dir);
- c->SG[i].Addr.lower = temp64.val32.lower;
- c->SG[i].Addr.upper = temp64.val32.upper;
- c->SG[i].Ext = 0; // we are not chaining
+ tmp_sg[i].offset,
+ tmp_sg[i].length, dir);
+ curr_sg[sg_index].Addr.lower = temp64.val32.lower;
+ curr_sg[sg_index].Addr.upper = temp64.val32.upper;
+ curr_sg[sg_index].Ext = 0; /* we are not chaining */
+
+ ++sg_index;
+ }
+
+ if (chained) {
+ int len;
+ curr_sg = c->SG;
+ sg_index = h->max_cmd_sgentries - 1;
+ len = curr_sg[sg_index].Len;
+ /* Setup pointer to next chain block.
+ * Fill out last element in current chain
+ * block with address of next chain block.
+ */
+ temp64.val = pci_map_single(h->pdev,
+ h->cmd_sg_list[c->cmdindex]->sgchain,
+ len, dir);
+
+ h->cmd_sg_list[c->cmdindex]->sg_chain_dma = temp64.val;
+ curr_sg[sg_index].Addr.lower = temp64.val32.lower;
+ curr_sg[sg_index].Addr.upper = temp64.val32.upper;
+
+ pci_dma_sync_single_for_device(h->pdev,
+ h->cmd_sg_list[c->cmdindex]->sg_chain_dma,
+ len, dir);
}
+
/* track how many SG entries we are using */
if (seg > h->maxSG)
h->maxSG = seg;
#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "cciss: Submitting %u sectors in %d segments\n",
- blk_rq_sectors(creq), seg);
+ printk(KERN_DEBUG "cciss: Submitting %ld sectors in %d segments "
+ "chained[%d]\n",
+ blk_rq_sectors(creq), seg, chained);
#endif /* CCISS_DEBUG */
- c->Header.SGList = c->Header.SGTotal = seg;
+ c->Header.SGList = c->Header.SGTotal = seg + chained;
+ if (seg > h->max_cmd_sgentries)
+ c->Header.SGList = h->max_cmd_sgentries;
+
if (likely(blk_fs_request(creq))) {
if(h->cciss_read == CCISS_READ_10) {
c->Request.CDB[1] = 0;
@@ -3513,28 +3383,33 @@ static int add_to_scan_list(struct ctlr_info *h)
* @h: Pointer to the controller.
*
* Removes the controller from the rescan queue if present. Blocks if
- * the controller is currently conducting a rescan.
+ * the controller is currently conducting a rescan. The controller
+ * can be in one of three states:
+ * 1. Doesn't need a scan
+ * 2. On the scan list, but not scanning yet (we remove it)
+ * 3. Busy scanning (and not on the list). In this case we want to wait for
+ * the scan to complete to make sure the scanning thread for this
+ * controller is completely idle.
**/
static void remove_from_scan_list(struct ctlr_info *h)
{
struct ctlr_info *test_h, *tmp_h;
- int scanning = 0;
mutex_lock(&scan_mutex);
list_for_each_entry_safe(test_h, tmp_h, &scan_q, scan_list) {
- if (test_h == h) {
+ if (test_h == h) { /* state 2. */
list_del(&h->scan_list);
complete_all(&h->scan_wait);
mutex_unlock(&scan_mutex);
return;
}
}
- if (&h->busy_scanning)
- scanning = 0;
- mutex_unlock(&scan_mutex);
-
- if (scanning)
+ if (h->busy_scanning) { /* state 3. */
+ mutex_unlock(&scan_mutex);
wait_for_completion(&h->scan_wait);
+ } else { /* state 1, nothing to do. */
+ mutex_unlock(&scan_mutex);
+ }
}
/**
@@ -3573,13 +3448,11 @@ static int scan_thread(void *data)
h->busy_scanning = 1;
mutex_unlock(&scan_mutex);
- if (h) {
- rebuild_lun_table(h, 0, 0);
- complete_all(&h->scan_wait);
- mutex_lock(&scan_mutex);
- h->busy_scanning = 0;
- mutex_unlock(&scan_mutex);
- }
+ rebuild_lun_table(h, 0, 0);
+ complete_all(&h->scan_wait);
+ mutex_lock(&scan_mutex);
+ h->busy_scanning = 0;
+ mutex_unlock(&scan_mutex);
}
}
@@ -3605,8 +3478,22 @@ static int check_for_unit_attention(ctlr_info_t *h, CommandList_struct *c)
case REPORT_LUNS_CHANGED:
printk(KERN_WARNING "cciss%d: report LUN data "
"changed\n", h->ctlr);
- add_to_scan_list(h);
- wake_up_process(cciss_scan_thread);
+ /*
+ * Here, we could call add_to_scan_list and wake up the scan thread,
+ * except that it's quite likely that we will get more than one
+ * REPORT_LUNS_CHANGED condition in quick succession, which means
+ * that those which occur after the first one will likely happen
+ * *during* the scan_thread's rescan. And the rescan code is not
+ * robust enough to restart in the middle, undoing what it has already
+ * done, and it's not clear that it's even possible to do this, since
+ * part of what it does is notify the block layer, which starts
+ * doing it's own i/o to read partition tables and so on, and the
+ * driver doesn't have visibility to know what might need undoing.
+ * In any event, if possible, it is horribly complicated to get right
+ * so we just don't do it for now.
+ *
+ * Note: this REPORT_LUNS_CHANGED condition only occurs on the MSA2012.
+ */
return 1;
break;
case POWER_OR_RESET:
@@ -3888,6 +3775,23 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
* leave a little room for ioctl calls.
*/
c->max_commands = readl(&(c->cfgtable->CmdsOutMax));
+ c->maxsgentries = readl(&(c->cfgtable->MaxSGElements));
+
+ /*
+ * Limit native command to 32 s/g elements to save dma'able memory.
+ * Howvever spec says if 0, use 31
+ */
+
+ c->max_cmd_sgentries = 31;
+ if (c->maxsgentries > 512) {
+ c->max_cmd_sgentries = 32;
+ c->chainsize = c->maxsgentries - c->max_cmd_sgentries + 1;
+ c->maxsgentries -= 1; /* account for chain pointer */
+ } else {
+ c->maxsgentries = 31; /* Default to traditional value */
+ c->chainsize = 0; /* traditional */
+ }
+
c->product_name = products[prod_index].product_name;
c->access = *(products[prod_index].access);
c->nr_cmds = c->max_commands - 4;
@@ -4214,6 +4118,7 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
{
int i;
int j = 0;
+ int k = 0;
int rc;
int dac, return_code;
InquiryData_struct *inq_buff;
@@ -4317,6 +4222,53 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
printk(KERN_ERR "cciss: out of memory");
goto clean4;
}
+
+ /* Need space for temp scatter list */
+ hba[i]->scatter_list = kmalloc(hba[i]->max_commands *
+ sizeof(struct scatterlist *),
+ GFP_KERNEL);
+ for (k = 0; k < hba[i]->nr_cmds; k++) {
+ hba[i]->scatter_list[k] = kmalloc(sizeof(struct scatterlist) *
+ hba[i]->maxsgentries,
+ GFP_KERNEL);
+ if (hba[i]->scatter_list[k] == NULL) {
+ printk(KERN_ERR "cciss%d: could not allocate "
+ "s/g lists\n", i);
+ goto clean4;
+ }
+ }
+ hba[i]->cmd_sg_list = kmalloc(sizeof(struct Cmd_sg_list *) *
+ hba[i]->nr_cmds,
+ GFP_KERNEL);
+ if (!hba[i]->cmd_sg_list) {
+ printk(KERN_ERR "cciss%d: Cannot get memory for "
+ "s/g chaining.\n", i);
+ goto clean4;
+ }
+ /* Build up chain blocks for each command */
+ if (hba[i]->chainsize > 0) {
+ for (j = 0; j < hba[i]->nr_cmds; j++) {
+ hba[i]->cmd_sg_list[j] =
+ kmalloc(sizeof(struct Cmd_sg_list),
+ GFP_KERNEL);
+ if (!hba[i]->cmd_sg_list[j]) {
+ printk(KERN_ERR "cciss%d: Cannot get memory "
+ "for chain block.\n", i);
+ goto clean4;
+ }
+ /* Need a block of chainsized s/g elements. */
+ hba[i]->cmd_sg_list[j]->sgchain =
+ kmalloc((hba[i]->chainsize *
+ sizeof(SGDescriptor_struct)),
+ GFP_KERNEL);
+ if (!hba[i]->cmd_sg_list[j]->sgchain) {
+ printk(KERN_ERR "cciss%d: Cannot get memory "
+ "for s/g chains\n", i);
+ goto clean4;
+ }
+ }
+ }
+
spin_lock_init(&hba[i]->lock);
/* Initialize the pdev driver private data.
@@ -4362,7 +4314,7 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
cciss_procinit(i);
- hba[i]->cciss_max_sectors = 2048;
+ hba[i]->cciss_max_sectors = 8192;
rebuild_lun_table(hba[i], 1, 0);
hba[i]->busy_initializing = 0;
@@ -4370,6 +4322,20 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
clean4:
kfree(hba[i]->cmd_pool_bits);
+ /* Free up sg elements */
+ for (k = 0; k < hba[i]->nr_cmds; k++)
+ kfree(hba[i]->scatter_list[k]);
+ kfree(hba[i]->scatter_list);
+ /* Only free up extra s/g lists if controller supports them */
+ if (hba[i]->chainsize > 0) {
+ for (j = 0; j < hba[i]->nr_cmds; j++) {
+ if (hba[i]->cmd_sg_list[j]) {
+ kfree(hba[i]->cmd_sg_list[j]->sgchain);
+ kfree(hba[i]->cmd_sg_list[j]);
+ }
+ }
+ kfree(hba[i]->cmd_sg_list);
+ }
if (hba[i]->cmd_pool)
pci_free_consistent(hba[i]->pdev,
hba[i]->nr_cmds * sizeof(CommandList_struct),
@@ -4400,30 +4366,28 @@ clean_no_release_regions:
static void cciss_shutdown(struct pci_dev *pdev)
{
- ctlr_info_t *tmp_ptr;
- int i;
- char flush_buf[4];
+ ctlr_info_t *h;
+ char *flush_buf;
int return_code;
- tmp_ptr = pci_get_drvdata(pdev);
- if (tmp_ptr == NULL)
- return;
- i = tmp_ptr->ctlr;
- if (hba[i] == NULL)
+ h = pci_get_drvdata(pdev);
+ flush_buf = kzalloc(4, GFP_KERNEL);
+ if (!flush_buf) {
+ printk(KERN_WARNING
+ "cciss:%d cache not flushed, out of memory.\n",
+ h->ctlr);
return;
-
- /* Turn board interrupts off and send the flush cache command */
- /* sendcmd will turn off interrupt, and send the flush...
- * To write all data in the battery backed cache to disks */
- memset(flush_buf, 0, 4);
- return_code = sendcmd(CCISS_CACHE_FLUSH, i, flush_buf, 4, 0,
- CTLR_LUNID, TYPE_CMD);
- if (return_code == IO_OK) {
- printk(KERN_INFO "Completed flushing cache on controller %d\n", i);
- } else {
- printk(KERN_WARNING "Error flushing cache on controller %d\n", i);
}
- free_irq(hba[i]->intr[2], hba[i]);
+ /* write all data in the battery backed cache to disk */
+ memset(flush_buf, 0, 4);
+ return_code = sendcmd_withirq(CCISS_CACHE_FLUSH, h->ctlr, flush_buf,
+ 4, 0, CTLR_LUNID, TYPE_CMD);
+ kfree(flush_buf);
+ if (return_code != IO_OK)
+ printk(KERN_WARNING "cciss%d: Error flushing cache\n",
+ h->ctlr);
+ h->access.set_intr_mask(h, CCISS_INTR_OFF);
+ free_irq(h->intr[2], h);
}
static void __devexit cciss_remove_one(struct pci_dev *pdev)
@@ -4485,6 +4449,20 @@ static void __devexit cciss_remove_one(struct pci_dev *pdev)
pci_free_consistent(hba[i]->pdev, hba[i]->nr_cmds * sizeof(ErrorInfo_struct),
hba[i]->errinfo_pool, hba[i]->errinfo_pool_dhandle);
kfree(hba[i]->cmd_pool_bits);
+ /* Free up sg elements */
+ for (j = 0; j < hba[i]->nr_cmds; j++)
+ kfree(hba[i]->scatter_list[j]);
+ kfree(hba[i]->scatter_list);
+ /* Only free up extra s/g lists if controller supports them */
+ if (hba[i]->chainsize > 0) {
+ for (j = 0; j < hba[i]->nr_cmds; j++) {
+ if (hba[i]->cmd_sg_list[j]) {
+ kfree(hba[i]->cmd_sg_list[j]->sgchain);
+ kfree(hba[i]->cmd_sg_list[j]);
+ }
+ }
+ kfree(hba[i]->cmd_sg_list);
+ }
/*
* Deliberately omit pci_disable_device(): it does something nasty to
* Smart Array controllers that pci_enable_device does not undo