diff options
Diffstat (limited to 'drivers/bus')
| -rw-r--r-- | drivers/bus/Kconfig | 93 | ||||
| -rw-r--r-- | drivers/bus/Makefile | 15 | ||||
| -rw-r--r-- | drivers/bus/simple-pm-bus.c | 58 |
3 files changed, 119 insertions, 47 deletions
diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig index 79e297b1f221..ea816ef23537 100644 --- a/drivers/bus/Kconfig +++ b/drivers/bus/Kconfig @@ -4,6 +4,41 @@ menu "Bus devices" +config ARM_CCI + bool + +config ARM_CCI400_COMMON + bool + select ARM_CCI + +config ARM_CCI400_PMU + bool "ARM CCI400 PMU support" + default y + depends on ARM || ARM64 + depends on HW_PERF_EVENTS + select ARM_CCI400_COMMON + help + Support for PMU events monitoring on the ARM CCI cache coherent + interconnect. + + If unsure, say Y + +config ARM_CCI400_PORT_CTRL + bool + depends on ARM && OF && CPU_V7 + select ARM_CCI400_COMMON + help + Low level power management driver for CCI400 cache coherent + interconnect for ARM platforms. + +config ARM_CCN + bool "ARM CCN driver support" + depends on ARM || ARM64 + depends on PERF_EVENTS + help + PMU (perf) driver supporting the ARM CCN (Cache Coherent Network) + interconnect. + config BRCMSTB_GISB_ARB bool "Broadcom STB GISB bus arbiter" depends on ARM || MIPS @@ -27,15 +62,6 @@ config MVEBU_MBUS Driver needed for the MBus configuration on Marvell EBU SoCs (Kirkwood, Dove, Orion5x, MV78XX0 and Armada 370/XP). -config OMAP_OCP2SCP - tristate "OMAP OCP2SCP DRIVER" - depends on ARCH_OMAP2PLUS - help - Driver to enable ocp2scp module which transforms ocp interface - protocol to scp protocol. In OMAP4, USB PHY is connected via - OCP2SCP and in OMAP5, both USB PHY and SATA PHY is connected via - OCP2SCP. - config OMAP_INTERCONNECT tristate "OMAP INTERCONNECT DRIVER" depends on ARCH_OMAP2PLUS @@ -43,40 +69,27 @@ config OMAP_INTERCONNECT help Driver to enable OMAP interconnect error handling driver. -config ARM_CCI400_PORT_CTRL - bool - depends on ARM && OF && CPU_V7 - select ARM_CCI400_COMMON - help - Low level power management driver for CCI400 cache coherent - interconnect for ARM platforms. - -config ARM_CCI400_PMU - bool "ARM CCI400 PMU support" - default y - depends on ARM || ARM64 - depends on HW_PERF_EVENTS - select ARM_CCI400_COMMON +config OMAP_OCP2SCP + tristate "OMAP OCP2SCP DRIVER" + depends on ARCH_OMAP2PLUS help - Support for PMU events monitoring on the ARM CCI cache coherent - interconnect. - - If unsure, say Y - -config ARM_CCI400_COMMON - bool - select ARM_CCI - -config ARM_CCI - bool + Driver to enable ocp2scp module which transforms ocp interface + protocol to scp protocol. In OMAP4, USB PHY is connected via + OCP2SCP and in OMAP5, both USB PHY and SATA PHY is connected via + OCP2SCP. -config ARM_CCN - bool "ARM CCN driver support" - depends on ARM || ARM64 - depends on PERF_EVENTS +config SIMPLE_PM_BUS + bool "Simple Power-Managed Bus Driver" + depends on OF && PM + depends on ARCH_SHMOBILE || COMPILE_TEST help - PMU (perf) driver supporting the ARM CCN (Cache Coherent Network) - interconnect. + Driver for transparent busses that don't need a real driver, but + where the bus controller is part of a PM domain, or under the control + of a functional clock, and thus relies on runtime PM for managing + this PM domain and/or clock. + An example of such a bus controller is the Renesas Bus State + Controller (BSC, sometimes called "LBSC within Bus Bridge", or + "External Bus Interface") as found on several Renesas ARM SoCs. config VEXPRESS_CONFIG bool "Versatile Express configuration bus" diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile index 2973c18cbcc2..e023a2bec664 100644 --- a/drivers/bus/Makefile +++ b/drivers/bus/Makefile @@ -2,16 +2,17 @@ # Makefile for the bus drivers. # +# Interconnect bus drivers for ARM platforms +obj-$(CONFIG_ARM_CCI) += arm-cci.o +obj-$(CONFIG_ARM_CCN) += arm-ccn.o + obj-$(CONFIG_BRCMSTB_GISB_ARB) += brcmstb_gisb.o -obj-$(CONFIG_IMX_WEIM) += imx-weim.o -obj-$(CONFIG_MVEBU_MBUS) += mvebu-mbus.o -obj-$(CONFIG_OMAP_OCP2SCP) += omap-ocp2scp.o +obj-$(CONFIG_IMX_WEIM) += imx-weim.o +obj-$(CONFIG_MVEBU_MBUS) += mvebu-mbus.o # Interconnect bus driver for OMAP SoCs. obj-$(CONFIG_OMAP_INTERCONNECT) += omap_l3_smx.o omap_l3_noc.o -# Interconnect bus drivers for ARM platforms -obj-$(CONFIG_ARM_CCI) += arm-cci.o -obj-$(CONFIG_ARM_CCN) += arm-ccn.o - +obj-$(CONFIG_OMAP_OCP2SCP) += omap-ocp2scp.o +obj-$(CONFIG_SIMPLE_PM_BUS) += simple-pm-bus.o obj-$(CONFIG_VEXPRESS_CONFIG) += vexpress-config.o diff --git a/drivers/bus/simple-pm-bus.c b/drivers/bus/simple-pm-bus.c new file mode 100644 index 000000000000..c5eb46cbf388 --- /dev/null +++ b/drivers/bus/simple-pm-bus.c @@ -0,0 +1,58 @@ +/* + * Simple Power-Managed Bus Driver + * + * Copyright (C) 2014-2015 Glider bvba + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/module.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> + + +static int simple_pm_bus_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + + dev_dbg(&pdev->dev, "%s\n", __func__); + + pm_runtime_enable(&pdev->dev); + + if (np) + of_platform_populate(np, NULL, NULL, &pdev->dev); + + return 0; +} + +static int simple_pm_bus_remove(struct platform_device *pdev) +{ + dev_dbg(&pdev->dev, "%s\n", __func__); + + pm_runtime_disable(&pdev->dev); + return 0; +} + +static const struct of_device_id simple_pm_bus_of_match[] = { + { .compatible = "simple-pm-bus", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, simple_pm_bus_of_match); + +static struct platform_driver simple_pm_bus_driver = { + .probe = simple_pm_bus_probe, + .remove = simple_pm_bus_remove, + .driver = { + .name = "simple-pm-bus", + .of_match_table = simple_pm_bus_of_match, + }, +}; + +module_platform_driver(simple_pm_bus_driver); + +MODULE_DESCRIPTION("Simple Power-Managed Bus Driver"); +MODULE_AUTHOR("Geert Uytterhoeven <geert+renesas@glider.be>"); +MODULE_LICENSE("GPL v2"); |