diff options
Diffstat (limited to 'drivers/char/ip2/ip2main.c')
| -rw-r--r-- | drivers/char/ip2/ip2main.c | 3234 |
1 files changed, 0 insertions, 3234 deletions
diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c deleted file mode 100644 index fcd02baa7d65..000000000000 --- a/drivers/char/ip2/ip2main.c +++ /dev/null @@ -1,3234 +0,0 @@ -/* -* -* (c) 1999 by Computone Corporation -* -******************************************************************************** -* -* PACKAGE: Linux tty Device Driver for IntelliPort family of multiport -* serial I/O controllers. -* -* DESCRIPTION: Mainline code for the device driver -* -*******************************************************************************/ -// ToDo: -// -// Fix the immediate DSS_NOW problem. -// Work over the channel stats return logic in ip2_ipl_ioctl so they -// make sense for all 256 possible channels and so the user space -// utilities will compile and work properly. -// -// Done: -// -// 1.2.14 /\/\|=mhw=|\/\/ -// Added bounds checking to ip2_ipl_ioctl to avoid potential terroristic acts. -// Changed the definition of ip2trace to be more consistent with kernel style -// Thanks to Andreas Dilger <adilger@turbolabs.com> for these updates -// -// 1.2.13 /\/\|=mhw=|\/\/ -// DEVFS: Renamed ttf/{n} to tts/F{n} and cuf/{n} to cua/F{n} to conform -// to agreed devfs serial device naming convention. -// -// 1.2.12 /\/\|=mhw=|\/\/ -// Cleaned up some remove queue cut and paste errors -// -// 1.2.11 /\/\|=mhw=|\/\/ -// Clean up potential NULL pointer dereferences -// Clean up devfs registration -// Add kernel command line parsing for io and irq -// Compile defaults for io and irq are now set in ip2.c not ip2.h! -// Reworked poll_only hack for explicit parameter setting -// You must now EXPLICITLY set poll_only = 1 or set all irqs to 0 -// Merged ip2_loadmain and old_ip2_init -// Converted all instances of interruptible_sleep_on into queue calls -// Most of these had no race conditions but better to clean up now -// -// 1.2.10 /\/\|=mhw=|\/\/ -// Fixed the bottom half interrupt handler and enabled USE_IQI -// to split the interrupt handler into a formal top-half / bottom-half -// Fixed timing window on high speed processors that queued messages to -// the outbound mail fifo faster than the board could handle. -// -// 1.2.9 -// Four box EX was barfing on >128k kmalloc, made structure smaller by -// reducing output buffer size -// -// 1.2.8 -// Device file system support (MHW) -// -// 1.2.7 -// Fixed -// Reload of ip2 without unloading ip2main hangs system on cat of /proc/modules -// -// 1.2.6 -//Fixes DCD problems -// DCD was not reported when CLOCAL was set on call to TIOCMGET -// -//Enhancements: -// TIOCMGET requests and waits for status return -// No DSS interrupts enabled except for DCD when needed -// -// For internal use only -// -//#define IP2DEBUG_INIT -//#define IP2DEBUG_OPEN -//#define IP2DEBUG_WRITE -//#define IP2DEBUG_READ -//#define IP2DEBUG_IOCTL -//#define IP2DEBUG_IPL - -//#define IP2DEBUG_TRACE -//#define DEBUG_FIFO - -/************/ -/* Includes */ -/************/ - -#include <linux/ctype.h> -#include <linux/string.h> -#include <linux/fcntl.h> -#include <linux/errno.h> -#include <linux/module.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/timer.h> -#include <linux/interrupt.h> -#include <linux/pci.h> -#include <linux/mm.h> -#include <linux/slab.h> -#include <linux/major.h> -#include <linux/wait.h> -#include <linux/device.h> -#include <linux/mutex.h> -#include <linux/firmware.h> -#include <linux/platform_device.h> - -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/termios.h> -#include <linux/tty_driver.h> -#include <linux/serial.h> -#include <linux/ptrace.h> -#include <linux/ioport.h> - -#include <linux/cdk.h> -#include <linux/comstats.h> -#include <linux/delay.h> -#include <linux/bitops.h> - -#include <asm/system.h> -#include <asm/io.h> -#include <asm/irq.h> - -#include <linux/vmalloc.h> -#include <linux/init.h> - -#include <asm/uaccess.h> - -#include "ip2types.h" -#include "ip2trace.h" -#include "ip2ioctl.h" -#include "ip2.h" -#include "i2ellis.h" -#include "i2lib.h" - -/***************** - * /proc/ip2mem * - *****************/ - -#include <linux/proc_fs.h> -#include <linux/seq_file.h> - -static DEFINE_MUTEX(ip2_mutex); -static const struct file_operations ip2mem_proc_fops; -static const struct file_operations ip2_proc_fops; - -/********************/ -/* Type Definitions */ -/********************/ - -/*************/ -/* Constants */ -/*************/ - -/* String constants to identify ourselves */ -static const char pcName[] = "Computone IntelliPort Plus multiport driver"; -static const char pcVersion[] = "1.2.14"; - -/* String constants for port names */ -static const char pcDriver_name[] = "ip2"; -static const char pcIpl[] = "ip2ipl"; - -/***********************/ -/* Function Prototypes */ -/***********************/ - -/* Global module entry functions */ - -/* Private (static) functions */ -static int ip2_open(PTTY, struct file *); -static void ip2_close(PTTY, struct file *); -static int ip2_write(PTTY, const unsigned char *, int); -static int ip2_putchar(PTTY, unsigned char); -static void ip2_flush_chars(PTTY); -static int ip2_write_room(PTTY); -static int ip2_chars_in_buf(PTTY); -static void ip2_flush_buffer(PTTY); -static int ip2_ioctl(PTTY, struct file *, UINT, ULONG); -static void ip2_set_termios(PTTY, struct ktermios *); -static void ip2_set_line_discipline(PTTY); -static void ip2_throttle(PTTY); -static void ip2_unthrottle(PTTY); -static void ip2_stop(PTTY); -static void ip2_start(PTTY); -static void ip2_hangup(PTTY); -static int ip2_tiocmget(struct tty_struct *tty, struct file *file); -static int ip2_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear); -static int ip2_get_icount(struct tty_struct *tty, - struct serial_icounter_struct *icount); - -static void set_irq(int, int); -static void ip2_interrupt_bh(struct work_struct *work); -static irqreturn_t ip2_interrupt(int irq, void *dev_id); -static void ip2_poll(unsigned long arg); -static inline void service_all_boards(void); -static void do_input(struct work_struct *); -static void do_status(struct work_struct *); - -static void ip2_wait_until_sent(PTTY,int); - -static void set_params (i2ChanStrPtr, struct ktermios *); -static int get_serial_info(i2ChanStrPtr, struct serial_struct __user *); -static int set_serial_info(i2ChanStrPtr, struct serial_struct __user *); - -static ssize_t ip2_ipl_read(struct file *, char __user *, size_t, loff_t *); -static ssize_t ip2_ipl_write(struct file *, const char __user *, size_t, loff_t *); -static long ip2_ipl_ioctl(struct file *, UINT, ULONG); -static int ip2_ipl_open(struct inode *, struct file *); - -static int DumpTraceBuffer(char __user *, int); -static int DumpFifoBuffer( char __user *, int); - -static void ip2_init_board(int, const struct firmware *); -static unsigned short find_eisa_board(int); -static int ip2_setup(char *str); - -/***************/ -/* Static Data */ -/***************/ - -static struct tty_driver *ip2_tty_driver; - -/* Here, then is a table of board pointers which the interrupt routine should - * scan through to determine who it must service. - */ -static unsigned short i2nBoards; // Number of boards here - -static i2eBordStrPtr i2BoardPtrTable[IP2_MAX_BOARDS]; - -static i2ChanStrPtr DevTable[IP2_MAX_PORTS]; -//DevTableMem just used to save addresses for kfree -static void *DevTableMem[IP2_MAX_BOARDS]; - -/* This is the driver descriptor for the ip2ipl device, which is used to - * download the loadware to the boards. - */ -static const struct file_operations ip2_ipl = { - .owner = THIS_MODULE, - .read = ip2_ipl_read, - .write = ip2_ipl_write, - .unlocked_ioctl = ip2_ipl_ioctl, - .open = ip2_ipl_open, - .llseek = noop_llseek, -}; - -static unsigned long irq_counter; -static unsigned long bh_counter; - -// Use immediate queue to service interrupts -#define USE_IQI -//#define USE_IQ // PCI&2.2 needs work - -/* The timer_list entry for our poll routine. If interrupt operation is not - * selected, the board is serviced periodically to see if anything needs doing. - */ -#define POLL_TIMEOUT (jiffies + 1) -static DEFINE_TIMER(PollTimer, ip2_poll, 0, 0); - -#ifdef IP2DEBUG_TRACE -/* Trace (debug) buffer data */ -#define TRACEMAX 1000 -static unsigned long tracebuf[TRACEMAX]; -static int tracestuff; -static int tracestrip; -static int tracewrap; -#endif - -/**********/ -/* Macros */ -/**********/ - -#ifdef IP2DEBUG_OPEN -#define DBG_CNT(s) printk(KERN_DEBUG "(%s): [%x] ttyc=%d, modc=%x -> %s\n", \ - tty->name,(pCh->flags), \ - tty->count,/*GET_USE_COUNT(module)*/0,s) -#else -#define DBG_CNT(s) -#endif - -/********/ -/* Code */ -/********/ - -#include "i2ellis.c" /* Extremely low-level interface services */ -#include "i2cmd.c" /* Standard loadware command definitions */ -#include "i2lib.c" /* High level interface services */ - -/* Configuration area for modprobe */ - -MODULE_AUTHOR("Doug McNash"); -MODULE_DESCRIPTION("Computone IntelliPort Plus Driver"); -MODULE_LICENSE("GPL"); - -#define MAX_CMD_STR 50 - -static int poll_only; -static char cmd[MAX_CMD_STR]; - -static int Eisa_irq; -static int Eisa_slot; - -static int iindx; -static char rirqs[IP2_MAX_BOARDS]; -static int Valid_Irqs[] = { 3, 4, 5, 7, 10, 11, 12, 15, 0}; - -/* Note: Add compiled in defaults to these arrays, not to the structure - in ip2.h any longer. That structure WILL get overridden - by these values, or command line values, or insmod values!!! =mhw= -*/ -static int io[IP2_MAX_BOARDS]; -static int irq[IP2_MAX_BOARDS] = { -1, -1, -1, -1 }; - -MODULE_AUTHOR("Doug McNash"); -MODULE_DESCRIPTION("Computone IntelliPort Plus Driver"); -module_param_array(irq, int, NULL, 0); -MODULE_PARM_DESC(irq, "Interrupts for IntelliPort Cards"); -module_param_array(io, int, NULL, 0); -MODULE_PARM_DESC(io, "I/O ports for IntelliPort Cards"); -module_param(poll_only, bool, 0); -MODULE_PARM_DESC(poll_only, "Do not use card interrupts"); -module_param_string(ip2, cmd, MAX_CMD_STR, 0); -MODULE_PARM_DESC(ip2, "Contains module parameter passed with 'ip2='"); - -/* for sysfs class support */ -static struct class *ip2_class; - -/* Some functions to keep track of what irqs we have */ - -static int __init is_valid_irq(int irq) -{ - int *i = Valid_Irqs; - - while (*i != 0 && *i != irq) - i++; - - return *i; -} - -static void __init mark_requested_irq(char irq) -{ - rirqs[iindx++] = irq; -} - -static int __exit clear_requested_irq(char irq) -{ - int i; - for (i = 0; i < IP2_MAX_BOARDS; ++i) { - if (rirqs[i] == irq) { - rirqs[i] = 0; - return 1; - } - } - return 0; -} - -static int have_requested_irq(char irq) -{ - /* array init to zeros so 0 irq will not be requested as a side - * effect */ - int i; - for (i = 0; i < IP2_MAX_BOARDS; ++i) - if (rirqs[i] == irq) - return 1; - return 0; -} - -/******************************************************************************/ -/* Function: cleanup_module() */ -/* Parameters: None */ -/* Returns: Nothing */ -/* */ -/* Description: */ -/* This is a required entry point for an installable module. It has to return */ -/* the device and the driver to a passive state. It should not be necessary */ -/* to reset the board fully, especially as the loadware is downloaded */ -/* externally rather than in the driver. We just want to disable the board */ -/* and clear the loadware to a reset state. To allow this there has to be a */ -/* way to detect whether the board has the loadware running at init time to */ -/* handle subsequent installations of the driver. All memory allocated by the */ -/* driver should be returned since it may be unloaded from memory. */ -/******************************************************************************/ -static void __exit ip2_cleanup_module(void) -{ - int err; - int i; - - del_timer_sync(&PollTimer); - - /* Reset the boards we have. */ - for (i = 0; i < IP2_MAX_BOARDS; i++) - if (i2BoardPtrTable[i]) - iiReset(i2BoardPtrTable[i]); - - /* The following is done at most once, if any boards were installed. */ - for (i = 0; i < IP2_MAX_BOARDS; i++) { - if (i2BoardPtrTable[i]) { - iiResetDelay(i2BoardPtrTable[i]); - /* free io addresses and Tibet */ - release_region(ip2config.addr[i], 8); - device_destroy(ip2_class, MKDEV(IP2_IPL_MAJOR, 4 * i)); - device_destroy(ip2_class, MKDEV(IP2_IPL_MAJOR, - 4 * i + 1)); - } - /* Disable and remove interrupt handler. */ - if (ip2config.irq[i] > 0 && - have_requested_irq(ip2config.irq[i])) { - free_irq(ip2config.irq[i], (void *)&pcName); - clear_requested_irq(ip2config.irq[i]); - } - } - class_destroy(ip2_class); - err = tty_unregister_driver(ip2_tty_driver); - if (err) - printk(KERN_ERR "IP2: failed to unregister tty driver (%d)\n", - err); - put_tty_driver(ip2_tty_driver); - unregister_chrdev(IP2_IPL_MAJOR, pcIpl); - remove_proc_entry("ip2mem", NULL); - - /* free memory */ - for (i = 0; i < IP2_MAX_BOARDS; i++) { - void *pB; -#ifdef CONFIG_PCI - if (ip2config.type[i] == PCI && ip2config.pci_dev[i]) { - pci_disable_device(ip2config.pci_dev[i]); - pci_dev_put(ip2config.pci_dev[i]); - ip2config.pci_dev[i] = NULL; - } -#endif - pB = i2BoardPtrTable[i]; - if (pB != NULL) { - kfree(pB); - i2BoardPtrTable[i] = NULL; - } - if (DevTableMem[i] != NULL) { - kfree(DevTableMem[i]); - DevTableMem[i] = NULL; - } - } -} -module_exit(ip2_cleanup_module); - -static const struct tty_operations ip2_ops = { - .open = ip2_open, - .close = ip2_close, - .write = ip2_write, - .put_char = ip2_putchar, - .flush_chars = ip2_flush_chars, - .write_room = ip2_write_room, - .chars_in_buffer = ip2_chars_in_buf, - .flush_buffer = ip2_flush_buffer, - .ioctl = ip2_ioctl, - .throttle = ip2_throttle, - .unthrottle = ip2_unthrottle, - .set_termios = ip2_set_termios, - .set_ldisc = ip2_set_line_discipline, - .stop = ip2_stop, - .start = ip2_start, - .hangup = ip2_hangup, - .tiocmget = ip2_tiocmget, - .tiocmset = ip2_tiocmset, - .get_icount = ip2_get_icount, - .proc_fops = &ip2_proc_fops, -}; - -/******************************************************************************/ -/* Function: ip2_loadmain() */ -/* Parameters: irq, io from command line of insmod et. al. */ -/* pointer to fip firmware and firmware size for boards */ -/* Returns: Success (0) */ -/* */ -/* Description: */ -/* This was the required entry point for all drivers (now in ip2.c) */ -/* It performs all */ -/* initialisation of the devices and driver structures, and registers itself */ -/* with the relevant kernel modules. */ -/******************************************************************************/ -/* IRQF_DISABLED - if set blocks all interrupts else only this line */ -/* IRQF_SHARED - for shared irq PCI or maybe EISA only */ -/* SA_RANDOM - can be source for cert. random number generators */ -#define IP2_SA_FLAGS 0 - - -static const struct firmware *ip2_request_firmware(void) -{ - struct platform_device *pdev; - const struct firmware *fw; - - pdev = platform_device_register_simple("ip2", 0, NULL, 0); - if (IS_ERR(pdev)) { - printk(KERN_ERR "Failed to register platform device for ip2\n"); - return NULL; - } - if (request_firmware(&fw, "intelliport2.bin", &pdev->dev)) { - printk(KERN_ERR "Failed to load firmware 'intelliport2.bin'\n"); - fw = NULL; - } - platform_device_unregister(pdev); - return fw; -} - -/****************************************************************************** - * ip2_setup: - * str: kernel command line string - * - * Can't autoprobe the boards so user must specify configuration on - * kernel command line. Sane people build it modular but the others - * come here. - * - * Alternating pairs of io,irq for up to 4 boards. - * ip2=io0,irq0,io1,irq1,io2,irq2,io3,irq3 - * - * io=0 => No board - * io=1 => PCI - * io=2 => EISA - * else => ISA I/O address - * - * irq=0 or invalid for ISA will revert to polling mode - * - * Any value = -1, do not overwrite compiled in value. - * - ******************************************************************************/ -static int __init ip2_setup(char *str) -{ - int j, ints[10]; /* 4 boards, 2 parameters + 2 */ - unsigned int i; - - str = get_options(str, ARRAY_SIZE(ints), ints); - - for (i = 0, j = 1; i < 4; i++) { - if (j > ints[0]) - break; - if (ints[j] >= 0) - io[i] = ints[j]; - j++; - if (j > ints[0]) - break; - if (ints[j] >= 0) - irq[i] = ints[j]; - j++; - } - return 1; -} -__setup("ip2=", ip2_setup); - -static int __init ip2_loadmain(void) -{ - int i, j, box; - int err = 0; - i2eBordStrPtr pB = NULL; - int rc = -1; - const struct firmware *fw = NULL; - char *str; - - str = cmd; - - if (poll_only) { - /* Hard lock the interrupts to zero */ - irq[0] = irq[1] = irq[2] = irq[3] = poll_only = 0; - } - - /* Check module parameter with 'ip2=' has been passed or not */ - if (!poll_only && (!strncmp(str, "ip2=", 4))) - ip2_setup(str); - - ip2trace(ITRC_NO_PORT, ITRC_INIT, ITRC_ENTER, 0); - - /* process command line arguments to modprobe or - insmod i.e. iop & irqp */ - /* irqp and iop should ALWAYS be specified now... But we check - them individually just to be sure, anyways... */ - for (i = 0; i < IP2_MAX_BOARDS; ++i) { - ip2config.addr[i] = io[i]; - if (irq[i] >= 0) - ip2config.irq[i] = irq[i]; - else - ip2config.irq[i] = 0; - /* This is a little bit of a hack. If poll_only=1 on command - line back in ip2.c OR all IRQs on all specified boards are - explicitly set to 0, then drop to poll only mode and override - PCI or EISA interrupts. This superceeds the old hack of - triggering if all interrupts were zero (like da default). - Still a hack but less prone to random acts of terrorism. - - What we really should do, now that the IRQ default is set - to -1, is to use 0 as a hard coded, do not probe. - - /\/\|=mhw=|\/\/ - */ - poll_only |= irq[i]; - } - poll_only = !poll_only; - - /* Announce our presence */ - printk(KERN_INFO "%s version %s\n", pcName, pcVersion); - - ip2_tty_driver = alloc_tty_driver(IP2_MAX_PORTS); - if (!ip2_tty_driver) - return -ENOMEM; - - /* Initialise all the boards we can find (up to the maximum). */ - for (i = 0; i < IP2_MAX_BOARDS; ++i) { - switch (ip2config.addr[i]) { - case 0: /* skip this slot even if card is present */ - break; - default: /* ISA */ - /* ISA address must be specified */ - if (ip2config.addr[i] < 0x100 || - ip2config.addr[i] > 0x3f8) { - printk(KERN_ERR "IP2: Bad ISA board %d " - "address %x\n", i, - ip2config.addr[i]); - ip2config.addr[i] = 0; - break; - } - ip2config.type[i] = ISA; - - /* Check for valid irq argument, set for polling if - * invalid */ - if (ip2config.irq[i] && - !is_valid_irq(ip2config.irq[i])) { - printk(KERN_ERR "IP2: Bad IRQ(%d) specified\n", - ip2config.irq[i]); - /* 0 is polling and is valid in that sense */ - ip2config.irq[i] = 0; - } - break; - case PCI: -#ifdef CONFIG_PCI - { - struct pci_dev *pdev = NULL; - u32 addr; - int status; - - pdev = pci_get_device(PCI_VENDOR_ID_COMPUTONE, - PCI_DEVICE_ID_COMPUTONE_IP2EX, pdev); - if (pdev == NULL) { - ip2config.addr[i] = 0; - printk(KERN_ERR "IP2: PCI board %d not " - "found\n", i); - break; - } - - if (pci_enable_device(pdev)) { - dev_err(&pdev->dev, "can't enable device\n"); - goto out; - } - ip2config.type[i] = PCI; - ip2config.pci_dev[i] = pci_dev_get(pdev); - status = pci_read_config_dword(pdev, PCI_BASE_ADDRESS_1, - &addr); - if (addr & 1) - ip2config.addr[i] = (USHORT)(addr & 0xfffe); - else - dev_err(&pdev->dev, "I/O address error\n"); - - ip2config.irq[i] = pdev->irq; -out: - pci_dev_put(pdev); - } -#else - printk(KERN_ERR "IP2: PCI card specified but PCI " - "support not enabled.\n"); - printk(KERN_ERR "IP2: Recompile kernel with CONFIG_PCI " - "defined!\n"); -#endif /* CONFIG_PCI */ - break; - case EISA: - ip2config.addr[i] = find_eisa_board(Eisa_slot + 1); - if (ip2config.addr[i] != 0) { - /* Eisa_irq set as side effect, boo */ - ip2config.type[i] = EISA; - } - ip2config.irq[i] = Eisa_irq; - break; - } /* switch */ - } /* for */ - - for (i = 0; i < IP2_MAX_BOARDS; ++i) { - if (ip2config.addr[i]) { - pB = kzalloc(sizeof(i2eBordStr), GFP_KERNEL); - if (pB) { - i2BoardPtrTable[i] = pB; - iiSetAddress(pB, ip2config.addr[i], - ii2DelayTimer); - iiReset(pB); - } else - printk(KERN_ERR "IP2: board memory allocation " - "error\n"); - } - } - for (i = 0; i < IP2_MAX_BOARDS; ++i) { - pB = i2BoardPtrTable[i]; - if (pB != NULL) { - iiResetDelay(pB); - break; - } - } - for (i = 0; i < IP2_MAX_BOARDS; ++i) { - /* We don't want to request the firmware unless we have at - least one board */ - if (i2BoardPtrTable[i] != NULL) { - if (!fw) - fw = ip2_request_firmware(); - if (!fw) - break; - ip2_init_board(i, fw); - } - } - if (fw) - release_firmware(fw); - - ip2trace(ITRC_NO_PORT, ITRC_INIT, 2, 0); - - ip2_tty_driver->owner = THIS_MODULE; - ip2_tty_driver->name = "ttyF"; - ip2_tty_driver->driver_name = pcDriver_name; - ip2_tty_driver->major = IP2_TTY_MAJOR; - ip2_tty_driver->minor_start = 0; - ip2_tty_driver->type = TTY_DRIVER_TYPE_SERIAL; - ip2_tty_driver->subtype = SERIAL_TYPE_NORMAL; - ip2_tty_driver->init_termios = tty_std_termios; - ip2_tty_driver->init_termios.c_cflag = B9600|CS8|CREAD|HUPCL|CLOCAL; - ip2_tty_driver->flags = TTY_DRIVER_REAL_RAW | - TTY_DRIVER_DYNAMIC_DEV; - tty_set_operations(ip2_tty_driver, &ip2_ops); - - ip2trace(ITRC_NO_PORT, ITRC_INIT, 3, 0); - - err = tty_register_driver(ip2_tty_driver); - if (err) { - printk(KERN_ERR "IP2: failed to register tty driver\n"); - put_tty_driver(ip2_tty_driver); - return err; /* leaking resources */ - } - - err = register_chrdev(IP2_IPL_MAJOR, pcIpl, &ip2_ipl); - if (err) { - printk(KERN_ERR "IP2: failed to register IPL device (%d)\n", - err); - } else { - /* create the sysfs class */ - ip2_class = class_create(THIS_MODULE, "ip2"); - if (IS_ERR(ip2_class)) { - err = PTR_ERR(ip2_class); - goto out_chrdev; - } - } - /* Register the read_procmem thing */ - if (!proc_create("ip2mem",0,NULL,&ip2mem_proc_fops)) { - printk(KERN_ERR "IP2: failed to register read_procmem\n"); - return -EIO; /* leaking resources */ - } - - ip2trace(ITRC_NO_PORT, ITRC_INIT, 4, 0); - /* Register the interrupt handler or poll handler, depending upon the - * specified interrupt. - */ - - for (i = 0; i < IP2_MAX_BOARDS; ++i) { - if (ip2config.addr[i] == 0) - continue; - - pB = i2BoardPtrTable[i]; - if (pB != NULL) { - device_create(ip2_class, NULL, - MKDEV(IP2_IPL_MAJOR, 4 * i), - NULL, "ipl%d", i); - device_create(ip2_class, NULL, - MKDEV(IP2_IPL_MAJOR, 4 * i + 1), - NULL, "stat%d", i); - - for (box = 0; box < ABS_MAX_BOXES; box++) - for (j = 0; j < ABS_BIGGEST_BOX; j++) - if (pB->i2eChannelMap[box] & (1 << j)) - tty_register_device( - ip2_tty_driver, - j + ABS_BIGGEST_BOX * - (box+i*ABS_MAX_BOXES), - NULL); - } - - if (poll_only) { - /* Poll only forces driver to only use polling and - to ignore the probed PCI or EISA interrupts. */ - ip2config.irq[i] = CIR_POLL; - } - if (ip2config.irq[i] == CIR_POLL) { -retry: - if (!timer_pending(&PollTimer)) { - mod_timer(&PollTimer, POLL_TIMEOUT); - printk(KERN_INFO "IP2: polling\n"); - } - } else { - if (have_requested_irq(ip2config.irq[i])) - continue; - rc = request_irq(ip2config.irq[i], ip2_interrupt, - IP2_SA_FLAGS | - (ip2config.type[i] == PCI ? IRQF_SHARED : 0), - pcName, i2BoardPtrTable[i]); - if (rc) { - printk(KERN_ERR "IP2: request_irq failed: " - "error %d\n", rc); - ip2config.irq[i] = CIR_POLL; - printk(KERN_INFO "IP2: Polling %ld/sec.\n", - (POLL_TIMEOUT - jiffies)); - goto retry; - } - mark_requested_irq(ip2config.irq[i]); - /* Initialise the interrupt handler bottom half - * (aka slih). */ - } - } - - for (i = 0; i < IP2_MAX_BOARDS; ++i) { - if (i2BoardPtrTable[i]) { - /* set and enable board interrupt */ - set_irq(i, ip2config.irq[i]); - } - } - - ip2trace(ITRC_NO_PORT, ITRC_INIT, ITRC_RETURN, 0); - - return 0; - -out_chrdev: - unregister_chrdev(IP2_IPL_MAJOR, "ip2"); - /* unregister and put tty here */ - return err; -} -module_init(ip2_loadmain); - -/******************************************************************************/ -/* Function: ip2_init_board() */ -/* Parameters: Index of board in configuration structure */ -/* Returns: Success (0) */ -/* */ -/* Description: */ -/* This function initializes the specified board. The loadware is copied to */ -/* the board, the channel structures are initialized, and the board details */ -/* are reported on the console. */ -/******************************************************************************/ -static void -ip2_init_board(int boardnum, const struct firmware *fw) -{ - int i; - int nports = 0, nboxes = 0; - i2ChanStrPtr pCh; - i2eBordStrPtr pB = i2BoardPtrTable[boardnum]; - - if ( !iiInitialize ( pB ) ) { - printk ( KERN_ERR "IP2: Failed to initialize board at 0x%x, error %d\n", - pB->i2eBase, pB->i2eError ); - goto err_initialize; - } - printk(KERN_INFO "IP2: Board %d: addr=0x%x irq=%d\n", boardnum + 1, - ip2config.addr[boardnum], ip2config.irq[boardnum] ); - - if (!request_region( ip2config.addr[boardnum], 8, pcName )) { - printk(KERN_ERR "IP2: bad addr=0x%x\n", ip2config.addr[boardnum]); - goto err_initialize; - } - - if ( iiDownloadAll ( pB, (loadHdrStrPtr)fw->data, 1, fw->size ) - != II_DOWN_GOOD ) { - printk ( KERN_ERR "IP2: failed to download loadware\n" ); - goto err_release_region; - } else { - printk ( KERN_INFO "IP2: fv=%d.%d.%d lv=%d.%d.%d\n", - pB->i2ePom.e.porVersion, - pB->i2ePom.e.porRevision, - pB->i2ePom.e.porSubRev, pB->i2eLVersion, - pB->i2eLRevision, pB->i2eLSub ); - } - - switch ( pB->i2ePom.e.porID & ~POR_ID_RESERVED ) { - - default: - printk( KERN_ERR "IP2: Unknown board type, ID = %x\n", - pB->i2ePom.e.porID ); - nports = 0; - goto err_release_region; - break; - - case POR_ID_II_4: /* IntelliPort-II, ISA-4 (4xRJ45) */ - printk ( KERN_INFO "IP2: ISA-4\n" ); - nports = 4; - break; - - case POR_ID_II_8: /* IntelliPort-II, 8-port using standard brick. */ - printk ( KERN_INFO "IP2: ISA-8 std\n" ); - nports = 8; - break; - - case POR_ID_II_8R: /* IntelliPort-II, 8-port using RJ11's (no CTS) */ - printk ( KERN_INFO "IP2: ISA-8 RJ11\n" ); - nports = 8; - break; - - case POR_ID_FIIEX: /* IntelliPort IIEX */ - { - int portnum = IP2_PORTS_PER_BOARD * boardnum; - int box; - - for( box = 0; box < ABS_MAX_BOXES; ++box ) { - if ( pB->i2eChannelMap[box] != 0 ) { - ++nboxes; - } - for( i = 0; i < ABS_BIGGEST_BOX; ++i ) { - if ( pB->i2eChannelMap[box] & 1<< i ) { - ++nports; - } - } - } - DevTableMem[boardnum] = pCh = - kmalloc( sizeof(i2ChanStr) * nports, GFP_KERNEL ); - if ( !pCh ) { - printk ( KERN_ERR "IP2: (i2_init_channel:) Out of memory.\n"); - goto err_release_region; - } - if ( !i2InitChannels( pB, nports, pCh ) ) { - printk(KERN_ERR "IP2: i2InitChannels failed: %d\n",pB->i2eError); - kfree ( pCh ); - goto err_release_region; - } - pB->i2eChannelPtr = &DevTable[portnum]; - pB->i2eChannelCnt = ABS_MOST_PORTS; - - for( box = 0; box < ABS_MAX_BOXES; ++box, portnum += ABS_BIGGEST_BOX ) { - for( i = 0; i < ABS_BIGGEST_BOX; ++i ) { - if ( pB->i2eChannelMap[box] & (1 << i) ) { - DevTable[portnum + i] = pCh; - pCh->port_index = portnum + i; - pCh++; - } - } - } - printk(KERN_INFO "IP2: EX box=%d ports=%d %d bit\n", - nboxes, nports, pB->i2eDataWidth16 ? 16 : 8 ); - } - goto ex_exit; - } - DevTableMem[boardnum] = pCh = - kmalloc ( sizeof (i2ChanStr) * nports, GFP_KERNEL ); - if ( !pCh ) { - printk ( KERN_ERR "IP2: (i2_init_channel:) Out of memory.\n"); - goto err_release_region; - } - pB->i2eChannelPtr = pCh; - pB->i2eChannelCnt = nports; - if ( !i2InitChannels( pB, nports, pCh ) ) { - printk(KERN_ERR "IP2: i2InitChannels failed: %d\n",pB->i2eError); - kfree ( pCh ); - goto err_release_region; - } - pB->i2eChannelPtr = &DevTable[IP2_PORTS_PER_BOARD * boardnum]; - - for( i = 0; i < pB->i2eChannelCnt; ++i ) { - DevTable[IP2_PORTS_PER_BOARD * boardnum + i] = pCh; - pCh->port_index = (IP2_PORTS_PER_BOARD * boardnum) + i; - pCh++; - } -ex_exit: - INIT_WORK(&pB->tqueue_interrupt, ip2_interrupt_bh); - return; - -err_release_region: - release_region(ip2config.addr[boardnum], 8); -err_initialize: - kfree ( pB ); - i2BoardPtrTable[boardnum] = NULL; - return; -} - -/******************************************************************************/ -/* Function: find_eisa_board ( int start_slot ) */ -/* Parameters: First slot to check */ -/* Returns: Address of EISA IntelliPort II controller */ -/* */ -/* Description: */ -/* This function searches for an EISA IntelliPort controller, starting */ -/* from the specified slot number. If the motherboard is not identified as an */ -/* EISA motherboard, or no valid board ID is selected it returns 0. Otherwise */ -/* it returns the base address of the controller. */ -/******************************************************************************/ -static unsigned short -find_eisa_board( int start_slot ) -{ - int i, j; - unsigned int idm = 0; - unsigned int idp = 0; - unsigned int base = 0; - unsigned int value; - int setup_address; - int setup_irq; - int ismine = 0; - - /* - * First a check for an EISA motherboard, which we do by comparing the - * EISA ID registers for the system board and the first couple of slots. - * No slot ID should match the system board ID, but on an ISA or PCI - * machine the odds are that an empty bus will return similar values for - * each slot. - */ - i = 0x0c80; - value = (inb(i) << 24) + (inb(i+1) << 16) + (inb(i+2) << 8) + inb(i+3); - for( i = 0x1c80; i <= 0x4c80; i += 0x1000 ) { - j = (inb(i)<<24)+(inb(i+1)<<16)+(inb(i+2)<<8)+inb(i+3); - if ( value == j ) - return 0; - } - - /* - * OK, so we are inclined to believe that this is an EISA machine. Find - * an IntelliPort controller. - */ - for( i = start_slot; i < 16; i++ ) { - base = i << 12; - idm = (inb(base + 0xc80) << 8) | (inb(base + 0xc81) & 0xff); - idp = (inb(base + 0xc82) << 8) | (inb(base + 0xc83) & 0xff); - ismine = 0; - if ( idm == 0x0e8e ) { - if ( idp == 0x0281 || idp == 0x0218 ) { - ismine = 1; - } else if ( idp == 0x0282 || idp == 0x0283 ) { - ismine = 3; /* Can do edge-trigger */ - } - if ( ismine ) { - Eisa_slot = i; - break; - } - } - } - if ( !ismine ) - return 0; - - /* It's some sort of EISA card, but at what address is it configured? */ - - setup_address = base + 0xc88; - value = inb(base + 0xc86); - setup_irq = (value & 8) ? Valid_Irqs[value & 7] : 0; - - if ( (ismine & 2) && !(value & 0x10) ) { - ismine = 1; /* Could be edging, but not */ - } - - if ( Eisa_irq == 0 ) { - Eisa_irq = setup_irq; - } else if ( Eisa_irq != setup_irq ) { - printk ( KERN_ERR "IP2: EISA irq mismatch between EISA controllers\n" ); - } - -#ifdef IP2DEBUG_INIT -printk(KERN_DEBUG "Computone EISA board in slot %d, I.D. 0x%x%x, Address 0x%x", - base >> 12, idm, idp, setup_address); - if ( Eisa_irq ) { - printk(KERN_DEBUG ", Interrupt %d %s\n", - setup_irq, (ismine & 2) ? "(edge)" : "(level)"); - } else { - printk(KERN_DEBUG ", (polled)\n"); - } -#endif - return setup_address; -} - -/******************************************************************************/ -/* Function: set_irq() */ -/* Parameters: index to board in board table */ -/* IRQ to use */ -/* Returns: Success (0) */ -/* */ -/* Description: */ -/******************************************************************************/ -static void -set_irq( int boardnum, int boardIrq ) -{ - unsigned char tempCommand[16]; - i2eBordStrPtr pB = i2BoardPtrTable[boardnum]; - unsigned long flags; - - /* - * Notify the boards they may generate interrupts. This is done by - * sending an in-line command to channel 0 on each board. This is why - * the channels have to be defined already. For each board, if the - * interrupt has never been defined, we must do so NOW, directly, since - * board will not send flow control or even give an interrupt until this - * is done. If polling we must send 0 as the interrupt parameter. - */ - - // We will get an interrupt here at the end of this function - - iiDisableMailIrq(pB); - - /* We build up the entire packet header. */ - CHANNEL_OF(tempCommand) = 0; - PTYPE_OF(tempCommand) = PTYPE_INLINE; - CMD_COUNT_OF(tempCommand) = 2; - (CMD_OF(tempCommand))[0] = CMDVALUE_IRQ; - (CMD_OF(tempCommand))[1] = boardIrq; - /* - * Write to FIFO; don't bother to adjust fifo capacity for this, since - * board will respond almost immediately after SendMail hit. - */ - write_lock_irqsave(&pB->write_fifo_spinlock, flags); - iiWriteBuf(pB, tempCommand, 4); - write_unlock_irqrestore(&pB->write_fifo_spinlock, flags); - pB->i2eUsingIrq = boardIrq; - pB->i2eOutMailWaiting |= MB_OUT_STUFFED; - - /* Need to update number of boards before you enable mailbox int */ - ++i2nBoards; - - CHANNEL_OF(tempCommand) = 0; - PTYPE_OF(tempCommand) = PTYPE_BYPASS; - CMD_COUNT_OF(tempCommand) = 6; - (CMD_OF(tempCommand))[0] = 88; // SILO - (CMD_OF(tempCommand))[1] = 64; // chars - (CMD_OF(tempCommand))[2] = 32; // ms - - (CMD_OF(tempCommand))[3] = 28; // MAX_BLOCK - (CMD_OF(tempCommand))[4] = 64; // chars - - (CMD_OF(tempCommand))[5] = 87; // HW_TEST - write_lock_irqsave(&pB->write_fifo_spinlock, flags); - iiWriteBuf(pB, tempCommand, 8); - write_unlock_irqrestore(&pB->write_fifo_spinlock, flags); - - CHANNEL_OF(tempCommand) = 0; - PTYPE_OF(tempCommand) = PTYPE_BYPASS; - CMD_COUNT_OF(tempCommand) = 1; - (CMD_OF(tempCommand))[0] = 84; /* get BOX_IDS */ - iiWriteBuf(pB, tempCommand, 3); - -#ifdef XXX - // enable heartbeat for test porpoises - CHANNEL_OF(tempCommand) = 0; - PTYPE_OF(tempCommand) = PTYPE_BYPASS; - CMD_COUNT_OF(tempCommand) = 2; - (CMD_OF(tempCommand))[0] = 44; /* get ping */ - (CMD_OF(tempCommand))[1] = 200; /* 200 ms */ - write_lock_irqsave(&pB->write_fifo_spinlock, flags); - iiWriteBuf(pB, tempCommand, 4); - write_unlock_irqrestore(&pB->write_fifo_spinlock, flags); -#endif - - iiEnableMailIrq(pB); - iiSendPendingMail(pB); -} - -/******************************************************************************/ -/* Interrupt Handler Section */ -/******************************************************************************/ - -static inline void -service_all_boards(void) -{ - int i; - i2eBordStrPtr pB; - - /* Service every board on the list */ - for( i = 0; i < IP2_MAX_BOARDS; ++i ) { - pB = i2BoardPtrTable[i]; - if ( pB ) { - i2ServiceBoard( pB ); - } - } -} - - -/******************************************************************************/ -/* Function: ip2_interrupt_bh(work) */ -/* Parameters: work - pointer to the board structure */ -/* Returns: Nothing */ -/* */ -/* Description: */ -/* Service the board in a bottom half interrupt handler and then */ -/* reenable the board's interrupts if it has an IRQ number */ -/* */ -/******************************************************************************/ -static void -ip2_interrupt_bh(struct work_struct *work) -{ - i2eBordStrPtr pB = container_of(work, i2eBordStr, tqueue_interrupt); -// pB better well be set or we have a problem! We can only get -// here from the IMMEDIATE queue. Here, we process the boards. -// Checking pB doesn't cost much and it saves us from the sanity checkers. - - bh_counter++; - - if ( pB ) { - i2ServiceBoard( pB ); - if( pB->i2eUsingIrq ) { -// Re-enable his interrupts - iiEnableMailIrq(pB); - } - } -} - - -/******************************************************************************/ -/* Function: ip2_interrupt(int irq, void *dev_id) */ -/* Parameters: irq - interrupt number */ -/* pointer to optional device ID structure */ -/* Returns: Nothing */ -/* */ -/* Description: */ -/* */ -/* Our task here is simply to identify each board which needs servicing. */ -/* If we are queuing then, queue it to be serviced, and disable its irq */ -/* mask otherwise process the board directly. */ -/* */ -/* We could queue by IRQ but that just complicates things on both ends */ -/* with very little gain in performance (how many instructions does */ -/* it take to iterate on the immediate queue). */ -/* */ -/* */ -/******************************************************************************/ -static void -ip2_irq_work(i2eBordStrPtr pB) -{ -#ifdef USE_IQI - if (NO_MAIL_HERE != ( pB->i2eStartMail = iiGetMail(pB))) { -// Disable his interrupt (will be enabled when serviced) -// This is mostly to protect from reentrancy. - iiDisableMailIrq(pB); - -// Park the board on the immediate queue for processing. - schedule_work(&pB->tqueue_interrupt); - -// Make sure the immediate queue is flagged to fire. - } -#else - -// We are using immediate servicing here. This sucks and can -// cause all sorts of havoc with ppp and others. The failsafe -// check on iiSendPendingMail could also throw a hairball. - - i2ServiceBoard( pB ); - -#endif /* USE_IQI */ -} - -static void -ip2_polled_interrupt(void) -{ - int i; - i2eBordStrPtr pB; - - ip2trace(ITRC_NO_PORT, ITRC_INTR, 99, 1, 0); - - /* Service just the boards on the list using this irq */ - for( i = 0; i < i2nBoards; ++i ) { - pB = i2BoardPtrTable[i]; - -// Only process those boards which match our IRQ. -// IRQ = 0 for polled boards, we won't poll "IRQ" boards - - if (pB && pB->i2eUsingIrq == 0) - ip2_irq_work(pB); - } - - ++irq_counter; - - ip2trace (ITRC_NO_PORT, ITRC_INTR, ITRC_RETURN, 0 ); -} - -static irqreturn_t -ip2_interrupt(int irq, void *dev_id) -{ - i2eBordStrPtr pB = dev_id; - - ip2trace (ITRC_NO_PORT, ITRC_INTR, 99, 1, pB->i2eUsingIrq ); - - ip2_irq_work(pB); - - ++irq_counter; - - ip2trace (ITRC_NO_PORT, ITRC_INTR, ITRC_RETURN, 0 ); - return IRQ_HANDLED; -} - -/******************************************************************************/ -/* Function: ip2_poll(unsigned long arg) */ -/* Parameters: ? */ -/* Returns: Nothing */ -/* */ -/* Description: */ -/* This function calls the library routine i2ServiceBoard for each board in */ -/* the board table. This is used instead of the interrupt routine when polled */ -/* mode is specified. */ -/******************************************************************************/ -static void -ip2_poll(unsigned long arg) -{ - ip2trace (ITRC_NO_PORT, ITRC_INTR, 100, 0 ); - - // Just polled boards, IRQ = 0 will hit all non-interrupt boards. - // It will NOT poll boards handled by hard interrupts. - // The issue of queued BH interrupts is handled in ip2_interrupt(). - ip2_polled_interrupt(); - - mod_timer(&PollTimer, POLL_TIMEOUT); - - ip2trace (ITRC_NO_PORT, ITRC_INTR, ITRC_RETURN, 0 ); -} - -static void do_input(struct work_struct *work) -{ - i2ChanStrPtr pCh = container_of(work, i2ChanStr, tqueue_input); - unsigned long flags; - - ip2trace(CHANN, ITRC_INPUT, 21, 0 ); - - // Data input - if ( pCh->pTTY != NULL ) { - read_lock_irqsave(&pCh->Ibuf_spinlock, flags); - if (!pCh->throttled && (pCh->Ibuf_stuff != pCh->Ibuf_strip)) { - read_unlock_irqrestore(&pCh->Ibuf_spinlock, flags); - i2Input( pCh ); - } else - read_unlock_irqrestore(&pCh->Ibuf_spinlock, flags); - } else { - ip2trace(CHANN, ITRC_INPUT, 22, 0 ); - - i2InputFlush( pCh ); - } -} - -// code duplicated from n_tty (ldisc) -static inline void isig(int sig, struct tty_struct *tty, int flush) -{ - /* FIXME: This is completely bogus */ - if (tty->pgrp) - kill_pgrp(tty->pgrp, sig, 1); - if (flush || !L_NOFLSH(tty)) { - if ( tty->ldisc->ops->flush_buffer ) - tty->ldisc->ops->flush_buffer(tty); - i2InputFlush( tty->driver_data ); - } -} - -static void do_status(struct work_struct *work) -{ - i2ChanStrPtr pCh = container_of(work, i2ChanStr, tqueue_status); - int status; - - status = i2GetStatus( pCh, (I2_BRK|I2_PAR|I2_FRA|I2_OVR) ); - - ip2trace (CHANN, ITRC_STATUS, 21, 1, status ); - - if (pCh->pTTY && (status & (I2_BRK|I2_PAR|I2_FRA|I2_OVR)) ) { - if ( (status & I2_BRK) ) { - // code duplicated from n_tty (ldisc) - if (I_IGNBRK(pCh->pTTY)) - goto skip_this; - if (I_BRKINT(pCh->pTTY)) { - isig(SIGINT, pCh->pTTY, 1); - goto skip_this; - } - wake_up_interruptible(&pCh->pTTY->read_wait); - } -#ifdef NEVER_HAPPENS_AS_SETUP_XXX - // and can't work because we don't know the_char - // as the_char is reported on a separate path - // The intelligent board does this stuff as setup - { - char brkf = TTY_NORMAL; - unsigned char brkc = '\0'; - unsigned char tmp; - if ( (status & I2_BRK) ) { - brkf = TTY_BREAK; - brkc = '\0'; - } - else if (status & I2_PAR) { - brkf = TTY_PARITY; - brkc = the_char; - } else if (status & I2_FRA) { - brkf = TTY_FRAME; - brkc = the_char; - } else if (status & I2_OVR) { - brkf = TTY_OVERRUN; - brkc = the_char; - } - tmp = pCh->pTTY->real_raw; - pCh->pTTY->real_raw = 0; - pCh->pTTY->ldisc->ops.receive_buf( pCh->pTTY, &brkc, &brkf, 1 ); - pCh->pTTY->real_raw = tmp; - } -#endif /* NEVER_HAPPENS_AS_SETUP_XXX */ - } -skip_this: - - if ( status & (I2_DDCD | I2_DDSR | I2_DCTS | I2_DRI) ) { - wake_up_interruptible(&pCh->delta_msr_wait); - - if ( (pCh->flags & ASYNC_CHECK_CD) && (status & I2_DDCD) ) { - if ( status & I2_DCD ) { - if ( pCh->wopen ) { - wake_up_interruptible ( &pCh->open_wait ); - } - } else { - if (pCh->pTTY && (!(pCh->pTTY->termios->c_cflag & CLOCAL)) ) { - tty_hangup( pCh->pTTY ); - } - } - } - } - - ip2trace (CHANN, ITRC_STATUS, 26, 0 ); -} - -/******************************************************************************/ -/* Device Open/Close/Ioctl Entry Point Section */ -/******************************************************************************/ - -/******************************************************************************/ -/* Function: open_sanity_check() */ -/* Parameters: Pointer to tty structure */ -/* Pointer to file structure */ -/* Returns: Success or failure */ -/* */ -/* Description: */ -/* Verifies the structure magic numbers and cross links. */ -/******************************************************************************/ -#ifdef IP2DEBUG_OPEN -static void -open_sanity_check( i2ChanStrPtr pCh, i2eBordStrPtr pBrd ) -{ - if ( pBrd->i2eValid != I2E_MAGIC ) { - printk(KERN_ERR "IP2: invalid board structure\n" ); - } else if ( pBrd != pCh->pMyBord ) { - printk(KERN_ERR "IP2: board structure pointer mismatch (%p)\n", - pCh->pMyBord ); - } else if ( pBrd->i2eChannelCnt < pCh->port_index ) { - printk(KERN_ERR "IP2: bad device index (%d)\n", pCh->port_index ); - } else if (&((i2ChanStrPtr)pBrd->i2eChannelPtr)[pCh->port_index] != pCh) { - } else { - printk(KERN_INFO "IP2: all pointers check out!\n" ); - } -} -#endif - - -/******************************************************************************/ -/* Function: ip2_open() */ -/* Parameters: Pointer to tty structure */ -/* Pointer to file structure */ -/* Returns: Success or failure */ -/* */ -/* Description: (MANDATORY) */ -/* A successful device open has to run a gauntlet of checks before it */ -/* completes. After some sanity checking and pointer setup, the function */ -/* blocks until all conditions are satisfied. It then initialises the port to */ -/* the default characteristics and returns. */ -/******************************************************************************/ -static int -ip2_open( PTTY tty, struct file *pFile ) -{ - wait_queue_t wait; - int rc = 0; - int do_clocal = 0; - i2ChanStrPtr pCh = DevTable[tty->index]; - - ip2trace (tty->index, ITRC_OPEN, ITRC_ENTER, 0 ); - - if ( pCh == NULL ) { - return -ENODEV; - } - /* Setup pointer links in device and tty structures */ - pCh->pTTY = tty; - tty->driver_data = pCh; - -#ifdef IP2DEBUG_OPEN - printk(KERN_DEBUG \ - "IP2:open(tty=%p,pFile=%p):dev=%s,ch=%d,idx=%d\n", - tty, pFile, tty->name, pCh->infl.hd.i2sChannel, pCh->port_index); - open_sanity_check ( pCh, pCh->pMyBord ); -#endif - - i2QueueCommands(PTYPE_INLINE, pCh, 100, 3, CMD_DTRUP,CMD_RTSUP,CMD_DCD_REP); - pCh->dataSetOut |= (I2_DTR | I2_RTS); - serviceOutgoingFifo( pCh->pMyBord ); - - /* Block here until the port is ready (per serial and istallion) */ - /* - * 1. If the port is in the middle of closing wait for the completion - * and then return the appropriate error. - */ - init_waitqueue_entry(&wait, current); - add_wait_queue(&pCh->close_wait, &wait); - set_current_state( TASK_INTERRUPTIBLE ); - - if ( tty_hung_up_p(pFile) || ( pCh->flags & ASYNC_CLOSING )) { - if ( pCh->flags & ASYNC_CLOSING ) { - tty_unlock(); - schedule(); - tty_lock(); - } - if ( tty_hung_up_p(pFile) ) { - set_current_state( TASK_RUNNING ); - remove_wait_queue(&pCh->close_wait, &wait); - return( pCh->flags & ASYNC_HUP_NOTIFY ) ? -EAGAIN : -ERESTARTSYS; - } - } - set_current_state( TASK_RUNNING ); - remove_wait_queue(&pCh->close_wait, &wait); - - /* - * 3. Handle a non-blocking open of a normal port. - */ - if ( (pFile->f_flags & O_NONBLOCK) || (tty->flags & (1<<TTY_IO_ERROR) )) { - pCh->flags |= ASYNC_NORMAL_ACTIVE; - goto noblock; - } - /* - * 4. Now loop waiting for the port to be free and carrier present - * (if required). - */ - if ( tty->termios->c_cflag & CLOCAL ) - do_clocal = 1; - -#ifdef IP2DEBUG_OPEN - printk(KERN_DEBUG "OpenBlock: do_clocal = %d\n", do_clocal); -#endif - - ++pCh->wopen; - - init_waitqueue_entry(&wait, current); - add_wait_queue(&pCh->open_wait, &wait); - - for(;;) { - i2QueueCommands(PTYPE_INLINE, pCh, 100, 2, CMD_DTRUP, CMD_RTSUP); - pCh->dataSetOut |= (I2_DTR | I2_RTS); - set_current_state( TASK_INTERRUPTIBLE ); - serviceOutgoingFifo( pCh->pMyBord ); - if ( tty_hung_up_p(pFile) ) { - set_current_state( TASK_RUNNING ); - remove_wait_queue(&pCh->open_wait, &wait); - return ( pCh->flags & ASYNC_HUP_NOTIFY ) ? -EBUSY : -ERESTARTSYS; - } - if (!(pCh->flags & ASYNC_CLOSING) && - (do_clocal || (pCh->dataSetIn & I2_DCD) )) { - rc = 0; - break; - } - -#ifdef IP2DEBUG_OPEN - printk(KERN_DEBUG "ASYNC_CLOSING = %s\n", - (pCh->flags & ASYNC_CLOSING)?"True":"False"); - printk(KERN_DEBUG "OpenBlock: waiting for CD or signal\n"); -#endif - ip2trace (CHANN, ITRC_OPEN, 3, 2, 0, - (pCh->flags & ASYNC_CLOSING) ); - /* check for signal */ - if (signal_pending(current)) { - rc = (( pCh->flags & ASYNC_HUP_NOTIFY ) ? -EAGAIN : -ERESTARTSYS); - break; - } - tty_unlock(); - schedule(); - tty_lock(); - } - set_current_state( TASK_RUNNING ); - remove_wait_queue(&pCh->open_wait, &wait); - - --pCh->wopen; //why count? - - ip2trace (CHANN, ITRC_OPEN, 4, 0 ); - - if (rc != 0 ) { - return rc; - } - pCh->flags |= ASYNC_NORMAL_ACTIVE; - -noblock: - - /* first open - Assign termios structure to port */ - if ( tty->count == 1 ) { - i2QueueCommands(PTYPE_INLINE, pCh, 0, 2, CMD_CTSFL_DSAB, CMD_RTSFL_DSAB); - /* Now we must send the termios settings to the loadware */ - set_params( pCh, NULL ); - } - - /* - * Now set any i2lib options. These may go away if the i2lib code ends - * up rolled into the mainline. - */ - pCh->channelOptions |= CO_NBLOCK_WRITE; - -#ifdef IP2DEBUG_OPEN - printk (KERN_DEBUG "IP2: open completed\n" ); -#endif - serviceOutgoingFifo( pCh->pMyBord ); - - ip2trace (CHANN, ITRC_OPEN, ITRC_RETURN, 0 ); - - return 0; -} - -/******************************************************************************/ -/* Function: ip2_close() */ -/* Parameters: Pointer to tty structure */ -/* Pointer to file structure */ -/* Returns: Nothing */ -/* */ -/* Description: */ -/* */ -/* */ -/******************************************************************************/ -static void -ip2_close( PTTY tty, struct file *pFile ) -{ - i2ChanStrPtr pCh = tty->driver_data; - - if ( !pCh ) { - return; - } - - ip2trace (CHANN, ITRC_CLOSE, ITRC_ENTER, 0 ); - -#ifdef IP2DEBUG_OPEN - printk(KERN_DEBUG "IP2:close %s:\n",tty->name); -#endif - - if ( tty_hung_up_p ( pFile ) ) { - - ip2trace (CHANN, ITRC_CLOSE, 2, 1, 2 ); - - return; - } - if ( tty->count > 1 ) { /* not the last close */ - - ip2trace (CHANN, ITRC_CLOSE, 2, 1, 3 ); - - return; - } - pCh->flags |= ASYNC_CLOSING; // last close actually - - tty->closing = 1; - - if (pCh->ClosingWaitTime != ASYNC_CLOSING_WAIT_NONE) { - /* - * Before we drop DTR, make sure the transmitter has completely drained. - * This uses an timeout, after which the close - * completes. - */ - ip2_wait_until_sent(tty, pCh->ClosingWaitTime ); - } - /* - * At this point we stop accepting input. Here we flush the channel - * input buffer which will allow the board to send up more data. Any - * additional input is tossed at interrupt/poll time. - */ - i2InputFlush( pCh ); - - /* disable DSS reporting */ - i2QueueCommands(PTYPE_INLINE, pCh, 100, 4, - CMD_DCD_NREP, CMD_CTS_NREP, CMD_DSR_NREP, CMD_RI_NREP); - if (tty->termios->c_cflag & HUPCL) { - i2QueueCommands(PTYPE_INLINE, pCh, 100, 2, CMD_RTSDN, CMD_DTRDN); - pCh->dataSetOut &= ~(I2_DTR | I2_RTS); - i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_PAUSE(25)); - } - - serviceOutgoingFifo ( pCh->pMyBord ); - - tty_ldisc_flush(tty); - tty_driver_flush_buffer(tty); - tty->closing = 0; - - pCh->pTTY = NULL; - - if (pCh->wopen) { - if (pCh->ClosingDelay) { - msleep_interruptible(jiffies_to_msecs(pCh->ClosingDelay)); - } - wake_up_interruptible(&pCh->open_wait); - } - - pCh->flags &=~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); - wake_up_interruptible(&pCh->close_wait); - -#ifdef IP2DEBUG_OPEN - DBG_CNT("ip2_close: after wakeups--"); -#endif - - - ip2trace (CHANN, ITRC_CLOSE, ITRC_RETURN, 1, 1 ); - - return; -} - -/******************************************************************************/ -/* Function: ip2_hangup() */ -/* Parameters: Pointer to tty structure */ -/* Returns: Nothing */ -/* */ -/* Description: */ -/* */ -/* */ -/******************************************************************************/ -static void -ip2_hangup ( PTTY tty ) -{ - i2ChanStrPtr pCh = tty->driver_data; - - if( !pCh ) { - return; - } - - ip2trace (CHANN, ITRC_HANGUP, ITRC_ENTER, 0 ); - - ip2_flush_buffer(tty); - - /* disable DSS reporting */ - - i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_DCD_NREP); - i2QueueCommands(PTYPE_INLINE, pCh, 0, 2, CMD_CTSFL_DSAB, CMD_RTSFL_DSAB); - if ( (tty->termios->c_cflag & HUPCL) ) { - i2QueueCommands(PTYPE_BYPASS, pCh, 0, 2, CMD_RTSDN, CMD_DTRDN); - pCh->dataSetOut &= ~(I2_DTR | I2_RTS); - i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_PAUSE(25)); - } - i2QueueCommands(PTYPE_INLINE, pCh, 1, 3, - CMD_CTS_NREP, CMD_DSR_NREP, CMD_RI_NREP); - serviceOutgoingFifo ( pCh->pMyBord ); - - wake_up_interruptible ( &pCh->delta_msr_wait ); - - pCh->flags &= ~ASYNC_NORMAL_ACTIVE; - pCh->pTTY = NULL; - wake_up_interruptible ( &pCh->open_wait ); - - ip2trace (CHANN, ITRC_HANGUP, ITRC_RETURN, 0 ); -} - -/******************************************************************************/ -/******************************************************************************/ -/* Device Output Section */ -/******************************************************************************/ -/******************************************************************************/ - -/******************************************************************************/ -/* Function: ip2_write() */ -/* Parameters: Pointer to tty structure */ -/* Flag denoting data is in user (1) or kernel (0) space */ -/* Pointer to data */ -/* Number of bytes to write */ -/* Returns: Number of bytes actually written */ -/* */ -/* Description: (MANDATORY) */ -/* */ -/* */ -/******************************************************************************/ -static int -ip2_write( PTTY tty, const unsigned char *pData, int count) -{ - i2ChanStrPtr pCh = tty->driver_data; - int bytesSent = 0; - unsigned long flags; - - ip2trace (CHANN, ITRC_WRITE, ITRC_ENTER, 2, count, -1 ); - - /* Flush out any buffered data left over from ip2_putchar() calls. */ - ip2_flush_chars( tty ); - - /* This is the actual move bit. Make sure it does what we need!!!!! */ - write_lock_irqsave(&pCh->Pbuf_spinlock, flags); - bytesSent = i2Output( pCh, pData, count); - write_unlock_irqrestore(&pCh->Pbuf_spinlock, flags); - - ip2trace (CHANN, ITRC_WRITE, ITRC_RETURN, 1, bytesSent ); - - return bytesSent > 0 ? bytesSent : 0; -} - -/******************************************************************************/ -/* Function: ip2_putchar() */ -/* Parameters: Pointer to tty structure */ -/* Character to write */ -/* Returns: Nothing */ -/* */ -/* Description: */ -/* */ -/* */ -/******************************************************************************/ -static int -ip2_putchar( PTTY tty, unsigned char ch ) -{ - i2ChanStrPtr pCh = tty->driver_data; - unsigned long flags; - -// ip2trace (CHANN, ITRC_PUTC, ITRC_ENTER, 1, ch ); - - write_lock_irqsave(&pCh->Pbuf_spinlock, flags); - pCh->Pbuf[pCh->Pbuf_stuff++] = ch; - if ( pCh->Pbuf_stuff == sizeof pCh->Pbuf ) { - write_unlock_irqrestore(&pCh->Pbuf_spinlock, flags); - ip2_flush_chars( tty ); - } else - write_unlock_irqrestore(&pCh->Pbuf_spinlock, flags); - return 1; - -// ip2trace (CHANN, ITRC_PUTC, ITRC_RETURN, 1, ch ); -} - -/******************************************************************************/ -/* Function: ip2_flush_chars() */ -/* Parameters: Pointer to tty structure */ -/* Returns: Nothing */ -/* */ -/* Description: */ -/* */ -/******************************************************************************/ -static void -ip2_flush_chars( PTTY tty ) -{ - int strip; - i2ChanStrPtr pCh = tty->driver_data; - unsigned long flags; - - write_lock_irqsave(&pCh->Pbuf_spinlock, flags); - if ( pCh->Pbuf_stuff ) { - -// ip2trace (CHANN, ITRC_PUTC, 10, 1, strip ); - - // - // We may need to restart i2Output if it does not fullfill this request - // - strip = i2Output( pCh, pCh->Pbuf, pCh->Pbuf_stuff); - if ( strip != pCh->Pbuf_stuff ) { - memmove( pCh->Pbuf, &pCh->Pbuf[strip], pCh->Pbuf_stuff - strip ); - } - pCh->Pbuf_stuff -= strip; - } - write_unlock_irqrestore(&pCh->Pbuf_spinlock, flags); -} - -/******************************************************************************/ -/* Function: ip2_write_room() */ -/* Parameters: Pointer to tty structure */ -/* Returns: Number of bytes that the driver can accept */ -/* */ -/* Description: */ -/* */ -/******************************************************************************/ -static int -ip2_write_room ( PTTY tty ) -{ - int bytesFree; - i2ChanStrPtr pCh = tty->driver_data; - unsigned long flags; - - read_lock_irqsave(&pCh->Pbuf_spinlock, flags); - bytesFree = i2OutputFree( pCh ) - pCh->Pbuf_stuff; - read_unlock_irqrestore(&pCh->Pbuf_spinlock, flags); - - ip2trace (CHANN, ITRC_WRITE, 11, 1, bytesFree ); - - return ((bytesFree > 0) ? bytesFree : 0); -} - -/******************************************************************************/ -/* Function: ip2_chars_in_buf() */ -/* Parameters: Pointer to tty structure */ -/* Returns: Number of bytes queued for transmission */ -/* */ -/* Description: */ -/* */ -/* */ -/******************************************************************************/ -static int -ip2_chars_in_buf ( PTTY tty ) -{ - i2ChanStrPtr pCh = tty->driver_data; - int rc; - unsigned long flags; - - ip2trace (CHANN, ITRC_WRITE, 12, 1, pCh->Obuf_char_count + pCh->Pbuf_stuff ); - -#ifdef IP2DEBUG_WRITE - printk (KERN_DEBUG "IP2: chars in buffer = %d (%d,%d)\n", - pCh->Obuf_char_count + pCh->Pbuf_stuff, - pCh->Obuf_char_count, pCh->Pbuf_stuff ); -#endif - read_lock_irqsave(&pCh->Obuf_spinlock, flags); - rc = pCh->Obuf_char_count; - read_unlock_irqrestore(&pCh->Obuf_spinlock, flags); - read_lock_irqsave(&pCh->Pbuf_spinlock, flags); - rc += pCh->Pbuf_stuff; - read_unlock_irqrestore(&pCh->Pbuf_spinlock, flags); - return rc; -} - -/******************************************************************************/ -/* Function: ip2_flush_buffer() */ -/* Parameters: Pointer to tty structure */ -/* Returns: Nothing */ -/* */ -/* Description: */ -/* */ -/* */ -/******************************************************************************/ -static void -ip2_flush_buffer( PTTY tty ) -{ - i2ChanStrPtr pCh = tty->driver_data; - unsigned long flags; - - ip2trace (CHANN, ITRC_FLUSH, ITRC_ENTER, 0 ); - -#ifdef IP2DEBUG_WRITE - printk (KERN_DEBUG "IP2: flush buffer\n" ); -#endif - write_lock_irqsave(&pCh->Pbuf_spinlock, flags); - pCh->Pbuf_stuff = 0; - write_unlock_irqrestore(&pCh->Pbuf_spinlock, flags); - i2FlushOutput( pCh ); - ip2_owake(tty); - - ip2trace (CHANN, ITRC_FLUSH, ITRC_RETURN, 0 ); - -} - -/******************************************************************************/ -/* Function: ip2_wait_until_sent() */ -/* Parameters: Pointer to tty structure */ -/* Timeout for wait. */ -/* Returns: Nothing */ -/* */ -/* Description: */ -/* This function is used in place of the normal tty_wait_until_sent, which */ -/* only waits for the driver buffers to be empty (or rather, those buffers */ -/* reported by chars_in_buffer) which doesn't work for IP2 due to the */ -/* indeterminate number of bytes buffered on the board. */ -/******************************************************************************/ -static void -ip2_wait_until_sent ( PTTY tty, int timeout ) -{ - int i = jiffies; - i2ChanStrPtr pCh = tty->driver_data; - - tty_wait_until_sent(tty, timeout ); - if ( (i = timeout - (jiffies -i)) > 0) - i2DrainOutput( pCh, i ); -} - -/******************************************************************************/ -/******************************************************************************/ -/* Device Input Section */ -/******************************************************************************/ -/******************************************************************************/ - -/******************************************************************************/ -/* Function: ip2_throttle() */ -/* Parameters: Pointer to tty structure */ -/* Returns: Nothing */ -/* */ -/* Description: */ -/* */ -/* */ -/******************************************************************************/ -static void -ip2_throttle ( PTTY tty ) -{ - i2ChanStrPtr pCh = tty->driver_data; - -#ifdef IP2DEBUG_READ - printk (KERN_DEBUG "IP2: throttle\n" ); -#endif - /* - * Signal the poll/interrupt handlers not to forward incoming data to - * the line discipline. This will cause the buffers to fill up in the - * library and thus cause the library routines to send the flow control - * stuff. - */ - pCh->throttled = 1; -} - -/******************************************************************************/ -/* Function: ip2_unthrottle() */ -/* Parameters: Pointer to tty structure */ -/* Returns: Nothing */ -/* */ -/* Description: */ -/* */ -/* */ -/******************************************************************************/ -static void -ip2_unthrottle ( PTTY tty ) -{ - i2ChanStrPtr pCh = tty->driver_data; - unsigned long flags; - -#ifdef IP2DEBUG_READ - printk (KERN_DEBUG "IP2: unthrottle\n" ); -#endif - - /* Pass incoming data up to the line discipline again. */ - pCh->throttled = 0; - i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_RESUME); - serviceOutgoingFifo( pCh->pMyBord ); - read_lock_irqsave(&pCh->Ibuf_spinlock, flags); - if ( pCh->Ibuf_stuff != pCh->Ibuf_strip ) { - read_unlock_irqrestore(&pCh->Ibuf_spinlock, flags); -#ifdef IP2DEBUG_READ - printk (KERN_DEBUG "i2Input called from unthrottle\n" ); -#endif - i2Input( pCh ); - } else - read_unlock_irqrestore(&pCh->Ibuf_spinlock, flags); -} - -static void -ip2_start ( PTTY tty ) -{ - i2ChanStrPtr pCh = DevTable[tty->index]; - - i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_RESUME); - i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_UNSUSPEND); - i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_RESUME); -#ifdef IP2DEBUG_WRITE - printk (KERN_DEBUG "IP2: start tx\n" ); -#endif -} - -static void -ip2_stop ( PTTY tty ) -{ - i2ChanStrPtr pCh = DevTable[tty->index]; - - i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_SUSPEND); -#ifdef IP2DEBUG_WRITE - printk (KERN_DEBUG "IP2: stop tx\n" ); -#endif -} - -/******************************************************************************/ -/* Device Ioctl Section */ -/******************************************************************************/ - -static int ip2_tiocmget(struct tty_struct *tty, struct file *file) -{ - i2ChanStrPtr pCh = DevTable[tty->index]; -#ifdef ENABLE_DSSNOW - wait_queue_t wait; -#endif - - if (pCh == NULL) - return -ENODEV; - -/* - FIXME - the following code is causing a NULL pointer dereference in - 2.3.51 in an interrupt handler. It's suppose to prompt the board - to return the DSS signal status immediately. Why doesn't it do - the same thing in 2.2.14? -*/ - -/* This thing is still busted in the 1.2.12 driver on 2.4.x - and even hoses the serial console so the oops can be trapped. - /\/\|=mhw=|\/\/ */ - -#ifdef ENABLE_DSSNOW - i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DSS_NOW); - - init_waitqueue_entry(&wait, current); - add_wait_queue(&pCh->dss_now_wait, &wait); - set_current_state( TASK_INTERRUPTIBLE ); - - serviceOutgoingFifo( pCh->pMyBord ); - - schedule(); - - set_current_state( TASK_RUNNING ); - remove_wait_queue(&pCh->dss_now_wait, &wait); - - if (signal_pending(current)) { - return -EINTR; - } -#endif - return ((pCh->dataSetOut & I2_RTS) ? TIOCM_RTS : 0) - | ((pCh->dataSetOut & I2_DTR) ? TIOCM_DTR : 0) - | ((pCh->dataSetIn & I2_DCD) ? TIOCM_CAR : 0) - | ((pCh->dataSetIn & I2_RI) ? TIOCM_RNG : 0) - | ((pCh->dataSetIn & I2_DSR) ? TIOCM_DSR : 0) - | ((pCh->dataSetIn & I2_CTS) ? TIOCM_CTS : 0); -} - -static int ip2_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) -{ - i2ChanStrPtr pCh = DevTable[tty->index]; - - if (pCh == NULL) - return -ENODEV; - - if (set & TIOCM_RTS) { - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_RTSUP); - pCh->dataSetOut |= I2_RTS; - } - if (set & TIOCM_DTR) { - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DTRUP); - pCh->dataSetOut |= I2_DTR; - } - - if (clear & TIOCM_RTS) { - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_RTSDN); - pCh->dataSetOut &= ~I2_RTS; - } - if (clear & TIOCM_DTR) { - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DTRDN); - pCh->dataSetOut &= ~I2_DTR; - } - serviceOutgoingFifo( pCh->pMyBord ); - return 0; -} - -/******************************************************************************/ -/* Function: ip2_ioctl() */ -/* Parameters: Pointer to tty structure */ -/* Pointer to file structure */ -/* Command */ -/* Argument */ -/* Returns: Success or failure */ -/* */ -/* Description: */ -/* */ -/* */ -/******************************************************************************/ -static int -ip2_ioctl ( PTTY tty, struct file *pFile, UINT cmd, ULONG arg ) -{ - wait_queue_t wait; - i2ChanStrPtr pCh = DevTable[tty->index]; - i2eBordStrPtr pB; - struct async_icount cprev, cnow; /* kernel counter temps */ - int rc = 0; - unsigned long flags; - void __user *argp = (void __user *)arg; - - if ( pCh == NULL ) - return -ENODEV; - - pB = pCh->pMyBord; - - ip2trace (CHANN, ITRC_IOCTL, ITRC_ENTER, 2, cmd, arg ); - -#ifdef IP2DEBUG_IOCTL - printk(KERN_DEBUG "IP2: ioctl cmd (%x), arg (%lx)\n", cmd, arg ); -#endif - - switch(cmd) { - case TIOCGSERIAL: - - ip2trace (CHANN, ITRC_IOCTL, 2, 1, rc ); - - rc = get_serial_info(pCh, argp); - if (rc) - return rc; - break; - - case TIOCSSERIAL: - - ip2trace (CHANN, ITRC_IOCTL, 3, 1, rc ); - - rc = set_serial_info(pCh, argp); - if (rc) - return rc; - break; - - case TCXONC: - rc = tty_check_change(tty); - if (rc) - return rc; - switch (arg) { - case TCOOFF: - //return -ENOIOCTLCMD; - break; - case TCOON: - //return -ENOIOCTLCMD; - break; - case TCIOFF: - if (STOP_CHAR(tty) != __DISABLED_CHAR) { - i2QueueCommands( PTYPE_BYPASS, pCh, 100, 1, - CMD_XMIT_NOW(STOP_CHAR(tty))); - } - break; - case TCION: - if (START_CHAR(tty) != __DISABLED_CHAR) { - i2QueueCommands( PTYPE_BYPASS, pCh, 100, 1, - CMD_XMIT_NOW(START_CHAR(tty))); - } - break; - default: - return -EINVAL; - } - return 0; - - case TCSBRK: /* SVID version: non-zero arg --> no break */ - rc = tty_check_change(tty); - - ip2trace (CHANN, ITRC_IOCTL, 4, 1, rc ); - - if (!rc) { - ip2_wait_until_sent(tty,0); - if (!arg) { - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_SEND_BRK(250)); - serviceOutgoingFifo( pCh->pMyBord ); - } - } - break; - - case TCSBRKP: /* support for POSIX tcsendbreak() */ - rc = tty_check_change(tty); - - ip2trace (CHANN, ITRC_IOCTL, 5, 1, rc ); - - if (!rc) { - ip2_wait_until_sent(tty,0); - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, - CMD_SEND_BRK(arg ? arg*100 : 250)); - serviceOutgoingFifo ( pCh->pMyBord ); - } - break; - - case TIOCGSOFTCAR: - - ip2trace (CHANN, ITRC_IOCTL, 6, 1, rc ); - - rc = put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned long __user *)argp); - if (rc) - return rc; - break; - - case TIOCSSOFTCAR: - - ip2trace (CHANN, ITRC_IOCTL, 7, 1, rc ); - - rc = get_user(arg,(unsigned long __user *) argp); - if (rc) - return rc; - tty->termios->c_cflag = ((tty->termios->c_cflag & ~CLOCAL) - | (arg ? CLOCAL : 0)); - - break; - - /* - * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change - mask - * passed in arg for lines of interest (use |'ed TIOCM_RNG/DSR/CD/CTS - * for masking). Caller should use TIOCGICOUNT to see which one it was - */ - case TIOCMIWAIT: - write_lock_irqsave(&pB->read_fifo_spinlock, flags); - cprev = pCh->icount; /* note the counters on entry */ - write_unlock_irqrestore(&pB->read_fifo_spinlock, flags); - i2QueueCommands(PTYPE_BYPASS, pCh, 100, 4, - CMD_DCD_REP, CMD_CTS_REP, CMD_DSR_REP, CMD_RI_REP); - init_waitqueue_entry(&wait, current); - add_wait_queue(&pCh->delta_msr_wait, &wait); - set_current_state( TASK_INTERRUPTIBLE ); - - serviceOutgoingFifo( pCh->pMyBord ); - for(;;) { - ip2trace (CHANN, ITRC_IOCTL, 10, 0 ); - - schedule(); - - ip2trace (CHANN, ITRC_IOCTL, 11, 0 ); - - /* see if a signal did it */ - if (signal_pending(current)) { - rc = -ERESTARTSYS; - break; - } - write_lock_irqsave(&pB->read_fifo_spinlock, flags); - cnow = pCh->icount; /* atomic copy */ - write_unlock_irqrestore(&pB->read_fifo_spinlock, flags); - if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && - cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) { - rc = -EIO; /* no change => rc */ - break; - } - if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || - ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || - ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || - ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) { - rc = 0; - break; - } - cprev = cnow; - } - set_current_state( TASK_RUNNING ); - remove_wait_queue(&pCh->delta_msr_wait, &wait); - - i2QueueCommands(PTYPE_BYPASS, pCh, 100, 3, - CMD_CTS_NREP, CMD_DSR_NREP, CMD_RI_NREP); - if ( ! (pCh->flags & ASYNC_CHECK_CD)) { - i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DCD_NREP); - } - serviceOutgoingFifo( pCh->pMyBord ); - return rc; - break; - - /* - * The rest are not supported by this driver. By returning -ENOIOCTLCMD they - * will be passed to the line discipline for it to handle. - */ - case TIOCSERCONFIG: - case TIOCSERGWILD: - case TIOCSERGETLSR: - case TIOCSERSWILD: - case TIOCSERGSTRUCT: - case TIOCSERGETMULTI: - case TIOCSERSETMULTI: - - default: - ip2trace (CHANN, ITRC_IOCTL, 12, 0 ); - - rc = -ENOIOCTLCMD; - break; - } - - ip2trace (CHANN, ITRC_IOCTL, ITRC_RETURN, 0 ); - - return rc; -} - -static int ip2_get_icount(struct tty_struct *tty, - struct serial_icounter_struct *icount) -{ - i2ChanStrPtr pCh = DevTable[tty->index]; - i2eBordStrPtr pB; - struct async_icount cnow; /* kernel counter temp */ - unsigned long flags; - - if ( pCh == NULL ) - return -ENODEV; - - pB = pCh->pMyBord; - - /* - * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) - * Return: write counters to the user passed counter struct - * NB: both 1->0 and 0->1 transitions are counted except for RI where - * only 0->1 is counted. The controller is quite capable of counting - * both, but this done to preserve compatibility with the standard - * serial driver. - */ - - write_lock_irqsave(&pB->read_fifo_spinlock, flags); - cnow = pCh->icount; - write_unlock_irqrestore(&pB->read_fifo_spinlock, flags); - - icount->cts = cnow.cts; - icount->dsr = cnow.dsr; - icount->rng = cnow.rng; - icount->dcd = cnow.dcd; - icount->rx = cnow.rx; - icount->tx = cnow.tx; - icount->frame = cnow.frame; - icount->overrun = cnow.overrun; - icount->parity = cnow.parity; - icount->brk = cnow.brk; - icount->buf_overrun = cnow.buf_overrun; - return 0; -} - -/******************************************************************************/ -/* Function: GetSerialInfo() */ -/* Parameters: Pointer to channel structure */ -/* Pointer to old termios structure */ -/* Returns: Nothing */ -/* */ -/* Description: */ -/* This is to support the setserial command, and requires processing of the */ -/* standard Linux serial structure. */ -/******************************************************************************/ -static int -get_serial_info ( i2ChanStrPtr pCh, struct serial_struct __user *retinfo ) -{ - struct serial_struct tmp; - - memset ( &tmp, 0, sizeof(tmp) ); - tmp.type = pCh->pMyBord->channelBtypes.bid_value[(pCh->port_index & (IP2_PORTS_PER_BOARD-1))/16]; - if (BID_HAS_654(tmp.type)) { - tmp.type = PORT_16650; - } else { - tmp.type = PORT_CIRRUS; - } - tmp.line = pCh->port_index; - tmp.port = pCh->pMyBord->i2eBase; - tmp.irq = ip2config.irq[pCh->port_index/64]; - tmp.flags = pCh->flags; - tmp.baud_base = pCh->BaudBase; - tmp.close_delay = pCh->ClosingDelay; - tmp.closing_wait = pCh->ClosingWaitTime; - tmp.custom_divisor = pCh->BaudDivisor; - return copy_to_user(retinfo,&tmp,sizeof(*retinfo)); -} - -/******************************************************************************/ -/* Function: SetSerialInfo() */ -/* Parameters: Pointer to channel structure */ -/* Pointer to old termios structure */ -/* Returns: Nothing */ -/* */ -/* Description: */ -/* This function provides support for setserial, which uses the TIOCSSERIAL */ -/* ioctl. Not all setserial parameters are relevant. If the user attempts to */ -/* change the IRQ, address or type of the port the ioctl fails. */ -/******************************************************************************/ -static int -set_serial_info( i2ChanStrPtr pCh, struct serial_struct __user *new_info ) -{ - struct serial_struct ns; - int old_flags, old_baud_divisor; - - if (copy_from_user(&ns, new_info, sizeof (ns))) - return -EFAULT; - - /* - * We don't allow setserial to change IRQ, board address, type or baud - * base. Also line nunber as such is meaningless but we use it for our - * array index so it is fixed also. - */ - if ( (ns.irq != ip2config.irq[pCh->port_index]) - || ((int) ns.port != ((int) (pCh->pMyBord->i2eBase))) - || (ns.baud_base != pCh->BaudBase) - || (ns.line != pCh->port_index) ) { - return -EINVAL; - } - - old_flags = pCh->flags; - old_baud_divisor = pCh->BaudDivisor; - - if ( !capable(CAP_SYS_ADMIN) ) { - if ( ( ns.close_delay != pCh->ClosingDelay ) || - ( (ns.flags & ~ASYNC_USR_MASK) != - (pCh->flags & ~ASYNC_USR_MASK) ) ) { - return -EPERM; - } - - pCh->flags = (pCh->flags & ~ASYNC_USR_MASK) | - (ns.flags & ASYNC_USR_MASK); - pCh->BaudDivisor = ns.custom_divisor; - } else { - pCh->flags = (pCh->flags & ~ASYNC_FLAGS) | - (ns.flags & ASYNC_FLAGS); - pCh->BaudDivisor = ns.custom_divisor; - pCh->ClosingDelay = ns.close_delay * HZ/100; - pCh->ClosingWaitTime = ns.closing_wait * HZ/100; - } - - if ( ( (old_flags & ASYNC_SPD_MASK) != (pCh->flags & ASYNC_SPD_MASK) ) - || (old_baud_divisor != pCh->BaudDivisor) ) { - // Invalidate speed and reset parameters - set_params( pCh, NULL ); - } - - return 0; -} - -/******************************************************************************/ -/* Function: ip2_set_termios() */ -/* Parameters: Pointer to tty structure */ -/* Pointer to old termios structure */ -/* Returns: Nothing */ -/* */ -/* Description: */ -/* */ -/* */ -/******************************************************************************/ -static void -ip2_set_termios( PTTY tty, struct ktermios *old_termios ) -{ - i2ChanStrPtr pCh = (i2ChanStrPtr)tty->driver_data; - -#ifdef IP2DEBUG_IOCTL - printk (KERN_DEBUG "IP2: set termios %p\n", old_termios ); -#endif - - set_params( pCh, old_termios ); -} - -/******************************************************************************/ -/* Function: ip2_set_line_discipline() */ -/* Parameters: Pointer to tty structure */ -/* Returns: Nothing */ -/* */ -/* Description: Does nothing */ -/* */ -/* */ -/******************************************************************************/ -static void -ip2_set_line_discipline ( PTTY tty ) -{ -#ifdef IP2DEBUG_IOCTL - printk (KERN_DEBUG "IP2: set line discipline\n" ); -#endif - - ip2trace (((i2ChanStrPtr)tty->driver_data)->port_index, ITRC_IOCTL, 16, 0 ); - -} - -/******************************************************************************/ -/* Function: SetLine Characteristics() */ -/* Parameters: Pointer to channel structure */ -/* Returns: Nothing */ -/* */ -/* Description: */ -/* This routine is called to update the channel structure with the new line */ -/* characteristics, and send the appropriate commands to the board when they */ -/* change. */ -/******************************************************************************/ -static void -set_params( i2ChanStrPtr pCh, struct ktermios *o_tios ) -{ - tcflag_t cflag, iflag, lflag; - char stop_char, start_char; - struct ktermios dummy; - - lflag = pCh->pTTY->termios->c_lflag; - cflag = pCh->pTTY->termios->c_cflag; - iflag = pCh->pTTY->termios->c_iflag; - - if (o_tios == NULL) { - dummy.c_lflag = ~lflag; - dummy.c_cflag = ~cflag; - dummy.c_iflag = ~iflag; - o_tios = &dummy; - } - - { - switch ( cflag & CBAUD ) { - case B0: - i2QueueCommands( PTYPE_BYPASS, pCh, 100, 2, CMD_RTSDN, CMD_DTRDN); - pCh->dataSetOut &= ~(I2_DTR | I2_RTS); - i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_PAUSE(25)); - pCh->pTTY->termios->c_cflag |= (CBAUD & o_tios->c_cflag); - goto service_it; - break; - case B38400: - /* - * This is the speed that is overloaded with all the other high - * speeds, depending upon the flag settings. - */ - if ( ( pCh->flags & ASYNC_SPD_MASK ) == ASYNC_SPD_HI ) { - pCh->speed = CBR_57600; - } else if ( (pCh->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI ) { - pCh->speed = CBR_115200; - } else if ( (pCh->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST ) { - pCh->speed = CBR_C1; - } else { - pCh->speed = CBR_38400; - } - break; - case B50: pCh->speed = CBR_50; break; - case B75: pCh->speed = CBR_75; break; - case B110: pCh->speed = CBR_110; break; - case B134: pCh->speed = CBR_134; break; - case B150: pCh->speed = CBR_150; break; - case B200: pCh->speed = CBR_200; break; - case B300: pCh->speed = CBR_300; break; - case B600: pCh->speed = CBR_600; break; - case B1200: pCh->speed = CBR_1200; break; - case B1800: pCh->speed = CBR_1800; break; - case B2400: pCh->speed = CBR_2400; break; - case B4800: pCh->speed = CBR_4800; break; - case B9600: pCh->speed = CBR_9600; break; - case B19200: pCh->speed = CBR_19200; break; - case B57600: pCh->speed = CBR_57600; break; - case B115200: pCh->speed = CBR_115200; break; - case B153600: pCh->speed = CBR_153600; break; - case B230400: pCh->speed = CBR_230400; break; - case B307200: pCh->speed = CBR_307200; break; - case B460800: pCh->speed = CBR_460800; break; - case B921600: pCh->speed = CBR_921600; break; - default: pCh->speed = CBR_9600; break; - } - if ( pCh->speed == CBR_C1 ) { - // Process the custom speed parameters. - int bps = pCh->BaudBase / pCh->BaudDivisor; - if ( bps == 921600 ) { - pCh->speed = CBR_921600; - } else { - bps = bps/10; - i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_BAUD_DEF1(bps) ); - } - } - i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_SETBAUD(pCh->speed)); - - i2QueueCommands ( PTYPE_INLINE, pCh, 100, 2, CMD_DTRUP, CMD_RTSUP); - pCh->dataSetOut |= (I2_DTR | I2_RTS); - } - if ( (CSTOPB & cflag) ^ (CSTOPB & o_tios->c_cflag)) - { - i2QueueCommands ( PTYPE_INLINE, pCh, 100, 1, - CMD_SETSTOP( ( cflag & CSTOPB ) ? CST_2 : CST_1)); - } - if (((PARENB|PARODD) & cflag) ^ ((PARENB|PARODD) & o_tios->c_cflag)) - { - i2QueueCommands ( PTYPE_INLINE, pCh, 100, 1, - CMD_SETPAR( - (cflag & PARENB ? (cflag & PARODD ? CSP_OD : CSP_EV) : CSP_NP) - ) - ); - } - /* byte size and parity */ - if ( (CSIZE & cflag)^(CSIZE & o_tios->c_cflag)) - { - int datasize; - switch ( cflag & CSIZE ) { - case CS5: datasize = CSZ_5; break; - case CS6: datasize = CSZ_6; break; - case CS7: datasize = CSZ_7; break; - case CS8: datasize = CSZ_8; break; - default: datasize = CSZ_5; break; /* as per serial.c */ - } - i2QueueCommands ( PTYPE_INLINE, pCh, 100, 1, CMD_SETBITS(datasize) ); - } - /* Process CTS flow control flag setting */ - if ( (cflag & CRTSCTS) ) { - i2QueueCommands(PTYPE_INLINE, pCh, 100, - 2, CMD_CTSFL_ENAB, CMD_RTSFL_ENAB); - } else { - i2QueueCommands(PTYPE_INLINE, pCh, 100, - 2, CMD_CTSFL_DSAB, CMD_RTSFL_DSAB); - } - // - // Process XON/XOFF flow control flags settings - // - stop_char = STOP_CHAR(pCh->pTTY); - start_char = START_CHAR(pCh->pTTY); - - //////////// can't be \000 - if (stop_char == __DISABLED_CHAR ) - { - stop_char = ~__DISABLED_CHAR; - } - if (start_char == __DISABLED_CHAR ) - { - start_char = ~__DISABLED_CHAR; - } - ///////////////////////////////// - - if ( o_tios->c_cc[VSTART] != start_char ) - { - i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DEF_IXON(start_char)); - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DEF_OXON(start_char)); - } - if ( o_tios->c_cc[VSTOP] != stop_char ) - { - i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DEF_IXOFF(stop_char)); - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DEF_OXOFF(stop_char)); - } - if (stop_char == __DISABLED_CHAR ) - { - stop_char = ~__DISABLED_CHAR; //TEST123 - goto no_xoff; - } - if ((iflag & (IXOFF))^(o_tios->c_iflag & (IXOFF))) - { - if ( iflag & IXOFF ) { // Enable XOFF output flow control - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_OXON_OPT(COX_XON)); - } else { // Disable XOFF output flow control -no_xoff: - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_OXON_OPT(COX_NONE)); - } - } - if (start_char == __DISABLED_CHAR ) - { - goto no_xon; - } - if ((iflag & (IXON|IXANY)) ^ (o_tios->c_iflag & (IXON|IXANY))) - { - if ( iflag & IXON ) { - if ( iflag & IXANY ) { // Enable XON/XANY output flow control - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_IXON_OPT(CIX_XANY)); - } else { // Enable XON output flow control - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_IXON_OPT(CIX_XON)); - } - } else { // Disable XON output flow control -no_xon: - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_IXON_OPT(CIX_NONE)); - } - } - if ( (iflag & ISTRIP) ^ ( o_tios->c_iflag & (ISTRIP)) ) - { - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, - CMD_ISTRIP_OPT((iflag & ISTRIP ? 1 : 0))); - } - if ( (iflag & INPCK) ^ ( o_tios->c_iflag & (INPCK)) ) - { - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, - CMD_PARCHK((iflag & INPCK) ? CPK_ENAB : CPK_DSAB)); - } - - if ( (iflag & (IGNBRK|PARMRK|BRKINT|IGNPAR)) - ^ ( o_tios->c_iflag & (IGNBRK|PARMRK|BRKINT|IGNPAR)) ) - { - char brkrpt = 0; - char parrpt = 0; - - if ( iflag & IGNBRK ) { /* Ignore breaks altogether */ - /* Ignore breaks altogether */ - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_BRK_NREP); - } else { - if ( iflag & BRKINT ) { - if ( iflag & PARMRK ) { - brkrpt = 0x0a; // exception an inline triple - } else { - brkrpt = 0x1a; // exception and NULL - } - brkrpt |= 0x04; // flush input - } else { - if ( iflag & PARMRK ) { - brkrpt = 0x0b; //POSIX triple \0377 \0 \0 - } else { - brkrpt = 0x01; // Null only - } - } - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_BRK_REP(brkrpt)); - } - - if (iflag & IGNPAR) { - parrpt = 0x20; - /* would be 2 for not cirrus bug */ - /* would be 0x20 cept for cirrus bug */ - } else { - if ( iflag & PARMRK ) { - /* - * Replace error characters with 3-byte sequence (\0377,\0,char) - */ - parrpt = 0x04 ; - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_ISTRIP_OPT((char)0)); - } else { - parrpt = 0x03; - } - } - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_SET_ERROR(parrpt)); - } - if (cflag & CLOCAL) { - // Status reporting fails for DCD if this is off - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DCD_NREP); - pCh->flags &= ~ASYNC_CHECK_CD; - } else { - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DCD_REP); - pCh->flags |= ASYNC_CHECK_CD; - } - -service_it: - i2DrainOutput( pCh, 100 ); -} - -/******************************************************************************/ -/* IPL Device Section */ -/******************************************************************************/ - -/******************************************************************************/ -/* Function: ip2_ipl_read() */ -/* Parameters: Pointer to device inode */ -/* Pointer to file structure */ -/* Pointer to data */ -/* Number of bytes to read */ -/* Returns: Success or failure */ -/* */ -/* Description: Ugly */ -/* */ -/* */ -/******************************************************************************/ - -static -ssize_t -ip2_ipl_read(struct file *pFile, char __user *pData, size_t count, loff_t *off ) -{ - unsigned int minor = iminor(pFile->f_path.dentry->d_inode); - int rc = 0; - -#ifdef IP2DEBUG_IPL - printk (KERN_DEBUG "IP2IPL: read %p, %d bytes\n", pData, count ); -#endif - - switch( minor ) { - case 0: // IPL device - rc = -EINVAL; - break; - case 1: // Status dump - rc = -EINVAL; - break; - case 2: // Ping device - rc = -EINVAL; - break; - case 3: // Trace device - rc = DumpTraceBuffer ( pData, count ); - break; - case 4: // Trace device - rc = DumpFifoBuffer ( pData, count ); - break; - default: - rc = -ENODEV; - break; - } - return rc; -} - -static int -DumpFifoBuffer ( char __user *pData, int count ) -{ -#ifdef DEBUG_FIFO - int rc; - rc = copy_to_user(pData, DBGBuf, count); - - printk(KERN_DEBUG "Last index %d\n", I ); - - return count; -#endif /* DEBUG_FIFO */ - return 0; -} - -static int -DumpTraceBuffer ( char __user *pData, int count ) -{ -#ifdef IP2DEBUG_TRACE - int rc; - int dumpcount; - int chunk; - int *pIndex = (int __user *)pData; - - if ( count < (sizeof(int) * 6) ) { - return -EIO; - } - rc = put_user(tracewrap, pIndex ); - rc = put_user(TRACEMAX, ++pIndex ); - rc = put_user(tracestrip, ++pIndex ); - rc = put_user(tracestuff, ++pIndex ); - pData += sizeof(int) * 6; - count -= sizeof(int) * 6; - - dumpcount = tracestuff - tracestrip; - if ( dumpcount < 0 ) { - dumpcount += TRACEMAX; - } - if ( dumpcount > count ) { - dumpcount = count; - } - chunk = TRACEMAX - tracestrip; - if ( dumpcount > chunk ) { - rc = copy_to_user(pData, &tracebuf[tracestrip], - chunk * sizeof(tracebuf[0]) ); - pData += chunk * sizeof(tracebuf[0]); - tracestrip = 0; - chunk = dumpcount - chunk; - } else { - chunk = dumpcount; - } - rc = copy_to_user(pData, &tracebuf[tracestrip], - chunk * sizeof(tracebuf[0]) ); - tracestrip += chunk; - tracewrap = 0; - - rc = put_user(tracestrip, ++pIndex ); - rc = put_user(tracestuff, ++pIndex ); - - return dumpcount; -#else - return 0; -#endif -} - -/******************************************************************************/ -/* Function: ip2_ipl_write() */ -/* Parameters: */ -/* Pointer to file structure */ -/* Pointer to data */ -/* Number of bytes to write */ -/* Returns: Success or failure */ -/* */ -/* Description: */ -/* */ -/* */ -/******************************************************************************/ -static ssize_t -ip2_ipl_write(struct file *pFile, const char __user *pData, size_t count, loff_t *off) -{ -#ifdef IP2DEBUG_IPL - printk (KERN_DEBUG "IP2IPL: write %p, %d bytes\n", pData, count ); -#endif - return 0; -} - -/******************************************************************************/ -/* Function: ip2_ipl_ioctl() */ -/* Parameters: Pointer to device inode */ -/* Pointer to file structure */ -/* Command */ -/* Argument */ -/* Returns: Success or failure */ -/* */ -/* Description: */ -/* */ -/* */ -/******************************************************************************/ -static long -ip2_ipl_ioctl (struct file *pFile, UINT cmd, ULONG arg ) -{ - unsigned int iplminor = iminor(pFile->f_path.dentry->d_inode); - int rc = 0; - void __user *argp = (void __user *)arg; - ULONG __user *pIndex = argp; - i2eBordStrPtr pB = i2BoardPtrTable[iplminor / 4]; - i2ChanStrPtr pCh; - -#ifdef IP2DEBUG_IPL - printk (KERN_DEBUG "IP2IPL: ioctl cmd %d, arg %ld\n", cmd, arg ); -#endif - - mutex_lock(&ip2_mutex); - - switch ( iplminor ) { - case 0: // IPL device - rc = -EINVAL; - break; - case 1: // Status dump - case 5: - case 9: - case 13: - switch ( cmd ) { - case 64: /* Driver - ip2stat */ - rc = put_user(-1, pIndex++ ); - rc = put_user(irq_counter, pIndex++ ); - rc = put_user(bh_counter, pIndex++ ); - break; - - case 65: /* Board - ip2stat */ - if ( pB ) { - rc = copy_to_user(argp, pB, sizeof(i2eBordStr)); - rc = put_user(inb(pB->i2eStatus), - (ULONG __user *)(arg + (ULONG)(&pB->i2eStatus) - (ULONG)pB ) ); - } else { - rc = -ENODEV; - } - break; - - default: - if (cmd < IP2_MAX_PORTS) { - pCh = DevTable[cmd]; - if ( pCh ) - { - rc = copy_to_user(argp, pCh, sizeof(i2ChanStr)); - if (rc) - rc = -EFAULT; - } else { - rc = -ENODEV; - } - } else { - rc = -EINVAL; - } - } - break; - - case 2: // Ping device - rc = -EINVAL; - break; - case 3: // Trace device - /* - * akpm: This used to write a whole bunch of function addresses - * to userspace, which generated lots of put_user() warnings. - * I killed it all. Just return "success" and don't do - * anything. - */ - if (cmd == 1) - rc = 0; - else - rc = -EINVAL; - break; - - default: - rc = -ENODEV; - break; - } - mutex_unlock(&ip2_mutex); - return rc; -} - -/******************************************************************************/ -/* Function: ip2_ipl_open() */ -/* Parameters: Pointer to device inode */ -/* Pointer to file structure */ -/* Returns: Success or failure */ -/* */ -/* Description: */ -/* */ -/* */ -/******************************************************************************/ -static int -ip2_ipl_open( struct inode *pInode, struct file *pFile ) -{ - -#ifdef IP2DEBUG_IPL - printk (KERN_DEBUG "IP2IPL: open\n" ); -#endif - return 0; -} - -static int -proc_ip2mem_show(struct seq_file *m, void *v) -{ - i2eBordStrPtr pB; - i2ChanStrPtr pCh; - PTTY tty; - int i; - -#define FMTLINE "%3d: 0x%08x 0x%08x 0%011o 0%011o\n" -#define FMTLIN2 " 0x%04x 0x%04x tx flow 0x%x\n" -#define FMTLIN3 " 0x%04x 0x%04x rc flow\n" - - seq_printf(m,"\n"); - - for( i = 0; i < IP2_MAX_BOARDS; ++i ) { - pB = i2BoardPtrTable[i]; - if ( pB ) { - seq_printf(m,"board %d:\n",i); - seq_printf(m,"\tFifo rem: %d mty: %x outM %x\n", - pB->i2eFifoRemains,pB->i2eWaitingForEmptyFifo,pB->i2eOutMailWaiting); - } - } - - seq_printf(m,"#: tty flags, port flags, cflags, iflags\n"); - for (i=0; i < IP2_MAX_PORTS; i++) { - pCh = DevTable[i]; - if (pCh) { - tty = pCh->pTTY; - if (tty && tty->count) { - seq_printf(m,FMTLINE,i,(int)tty->flags,pCh->flags, - tty->termios->c_cflag,tty->termios->c_iflag); - - seq_printf(m,FMTLIN2, - pCh->outfl.asof,pCh->outfl.room,pCh->channelNeeds); - seq_printf(m,FMTLIN3,pCh->infl.asof,pCh->infl.room); - } - } - } - return 0; -} - -static int proc_ip2mem_open(struct inode *inode, struct file *file) -{ - return single_open(file, proc_ip2mem_show, NULL); -} - -static const struct file_operations ip2mem_proc_fops = { - .owner = THIS_MODULE, - .open = proc_ip2mem_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -/* - * This is the handler for /proc/tty/driver/ip2 - * - * This stretch of code has been largely plagerized from at least three - * different sources including ip2mkdev.c and a couple of other drivers. - * The bugs are all mine. :-) =mhw= - */ -static int ip2_proc_show(struct seq_file *m, void *v) -{ - int i, j, box; - int boxes = 0; - int ports = 0; - int tports = 0; - i2eBordStrPtr pB; - char *sep; - - seq_printf(m, "ip2info: 1.0 driver: %s\n", pcVersion); - seq_printf(m, "Driver: SMajor=%d CMajor=%d IMajor=%d MaxBoards=%d MaxBoxes=%d MaxPorts=%d\n", - IP2_TTY_MAJOR, IP2_CALLOUT_MAJOR, IP2_IPL_MAJOR, - IP2_MAX_BOARDS, ABS_MAX_BOXES, ABS_BIGGEST_BOX); - - for( i = 0; i < IP2_MAX_BOARDS; ++i ) { - /* This need to be reset for a board by board count... */ - boxes = 0; - pB = i2BoardPtrTable[i]; - if( pB ) { - switch( pB->i2ePom.e.porID & ~POR_ID_RESERVED ) - { - case POR_ID_FIIEX: - seq_printf(m, "Board %d: EX ports=", i); - sep = ""; - for( box = 0; box < ABS_MAX_BOXES; ++box ) - { - ports = 0; - - if( pB->i2eChannelMap[box] != 0 ) ++boxes; - for( j = 0; j < ABS_BIGGEST_BOX; ++j ) - { - if( pB->i2eChannelMap[box] & 1<< j ) { - ++ports; - } - } - seq_printf(m, "%s%d", sep, ports); - sep = ","; - tports += ports; - } - seq_printf(m, " boxes=%d width=%d", boxes, pB->i2eDataWidth16 ? 16 : 8); - break; - - case POR_ID_II_4: - seq_printf(m, "Board %d: ISA-4 ports=4 boxes=1", i); - tports = ports = 4; - break; - - case POR_ID_II_8: - seq_printf(m, "Board %d: ISA-8-std ports=8 boxes=1", i); - tports = ports = 8; - break; - - case POR_ID_II_8R: - seq_printf(m, "Board %d: ISA-8-RJ11 ports=8 boxes=1", i); - tports = ports = 8; - break; - - default: - seq_printf(m, "Board %d: unknown", i); - /* Don't try and probe for minor numbers */ - tports = ports = 0; - } - - } else { - /* Don't try and probe for minor numbers */ - seq_printf(m, "Board %d: vacant", i); - tports = ports = 0; - } - - if( tports ) { - seq_puts(m, " minors="); - sep = ""; - for ( box = 0; box < ABS_MAX_BOXES; ++box ) - { - for ( j = 0; j < ABS_BIGGEST_BOX; ++j ) - { - if ( pB->i2eChannelMap[box] & (1 << j) ) - { - seq_printf(m, "%s%d", sep, - j + ABS_BIGGEST_BOX * - (box+i*ABS_MAX_BOXES)); - sep = ","; - } - } - } - } - seq_putc(m, '\n'); - } - return 0; - } - -static int ip2_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, ip2_proc_show, NULL); -} - -static const struct file_operations ip2_proc_fops = { - .owner = THIS_MODULE, - .open = ip2_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -/******************************************************************************/ -/* Function: ip2trace() */ -/* Parameters: Value to add to trace buffer */ -/* Returns: Nothing */ -/* */ -/* Description: */ -/* */ -/* */ -/******************************************************************************/ -#ifdef IP2DEBUG_TRACE -void -ip2trace (unsigned short pn, unsigned char cat, unsigned char label, unsigned long codes, ...) -{ - long flags; - unsigned long *pCode = &codes; - union ip2breadcrumb bc; - i2ChanStrPtr pCh; - - - tracebuf[tracestuff++] = jiffies; - if ( tracestuff == TRACEMAX ) { - tracestuff = 0; - } - if ( tracestuff == tracestrip ) { - if ( ++tracestrip == TRACEMAX ) { - tracestrip = 0; - } - ++tracewrap; - } - - bc.hdr.port = 0xff & pn; - bc.hdr.cat = cat; - bc.hdr.codes = (unsigned char)( codes & 0xff ); - bc.hdr.label = label; - tracebuf[tracestuff++] = bc.value; - - for (;;) { - if ( tracestuff == TRACEMAX ) { - tracestuff = 0; - } - if ( tracestuff == tracestrip ) { - if ( ++tracestrip == TRACEMAX ) { - tracestrip = 0; - } - ++tracewrap; - } - - if ( !codes-- ) - break; - - tracebuf[tracestuff++] = *++pCode; - } -} -#endif - - -MODULE_LICENSE("GPL"); - -static struct pci_device_id ip2main_pci_tbl[] __devinitdata = { - { PCI_DEVICE(PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_IP2EX) }, - { } -}; - -MODULE_DEVICE_TABLE(pci, ip2main_pci_tbl); - -MODULE_FIRMWARE("intelliport2.bin"); |