diff options
Diffstat (limited to 'drivers/char/specialix.c')
| -rw-r--r-- | drivers/char/specialix.c | 2368 |
1 files changed, 0 insertions, 2368 deletions
diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c deleted file mode 100644 index a7616d226a49..000000000000 --- a/drivers/char/specialix.c +++ /dev/null @@ -1,2368 +0,0 @@ -/* - * specialix.c -- specialix IO8+ multiport serial driver. - * - * Copyright (C) 1997 Roger Wolff (R.E.Wolff@BitWizard.nl) - * Copyright (C) 1994-1996 Dmitry Gorodchanin (pgmdsg@ibi.com) - * - * Specialix pays for the development and support of this driver. - * Please DO contact io8-linux@specialix.co.uk if you require - * support. But please read the documentation (specialix.txt) - * first. - * - * This driver was developped in the BitWizard linux device - * driver service. If you require a linux device driver for your - * product, please contact devices@BitWizard.nl for a quote. - * - * This code is firmly based on the riscom/8 serial driver, - * written by Dmitry Gorodchanin. The specialix IO8+ card - * programming information was obtained from the CL-CD1865 Data - * Book, and Specialix document number 6200059: IO8+ Hardware - * Functional Specification. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be - * useful, but WITHOUT ANY WARRANTY; without even the implied - * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR - * PURPOSE. See the GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this program; if not, write to the Free - * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, - * USA. - * - * Revision history: - * - * Revision 1.0: April 1st 1997. - * Initial release for alpha testing. - * Revision 1.1: April 14th 1997. - * Incorporated Richard Hudsons suggestions, - * removed some debugging printk's. - * Revision 1.2: April 15th 1997. - * Ported to 2.1.x kernels. - * Revision 1.3: April 17th 1997 - * Backported to 2.0. (Compatibility macros). - * Revision 1.4: April 18th 1997 - * Fixed DTR/RTS bug that caused the card to indicate - * "don't send data" to a modem after the password prompt. - * Fixed bug for premature (fake) interrupts. - * Revision 1.5: April 19th 1997 - * fixed a minor typo in the header file, cleanup a little. - * performance warnings are now MAXed at once per minute. - * Revision 1.6: May 23 1997 - * Changed the specialix=... format to include interrupt. - * Revision 1.7: May 27 1997 - * Made many more debug printk's a compile time option. - * Revision 1.8: Jul 1 1997 - * port to linux-2.1.43 kernel. - * Revision 1.9: Oct 9 1998 - * Added stuff for the IO8+/PCI version. - * Revision 1.10: Oct 22 1999 / Jan 21 2000. - * Added stuff for setserial. - * Nicolas Mailhot (Nicolas.Mailhot@email.enst.fr) - * - */ - -#define VERSION "1.11" - - -/* - * There is a bunch of documentation about the card, jumpers, config - * settings, restrictions, cables, device names and numbers in - * Documentation/serial/specialix.txt - */ - -#include <linux/module.h> - -#include <linux/io.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/ioport.h> -#include <linux/interrupt.h> -#include <linux/errno.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/mm.h> -#include <linux/serial.h> -#include <linux/fcntl.h> -#include <linux/major.h> -#include <linux/delay.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/uaccess.h> -#include <linux/gfp.h> - -#include "specialix_io8.h" -#include "cd1865.h" - - -/* - This driver can spew a whole lot of debugging output at you. If you - need maximum performance, you should disable the DEBUG define. To - aid in debugging in the field, I'm leaving the compile-time debug - features enabled, and disable them "runtime". That allows me to - instruct people with problems to enable debugging without requiring - them to recompile... -*/ -#define DEBUG - -static int sx_debug; -static int sx_rxfifo = SPECIALIX_RXFIFO; -static int sx_rtscts; - -#ifdef DEBUG -#define dprintk(f, str...) if (sx_debug & f) printk(str) -#else -#define dprintk(f, str...) /* nothing */ -#endif - -#define SX_DEBUG_FLOW 0x0001 -#define SX_DEBUG_DATA 0x0002 -#define SX_DEBUG_PROBE 0x0004 -#define SX_DEBUG_CHAN 0x0008 -#define SX_DEBUG_INIT 0x0010 -#define SX_DEBUG_RX 0x0020 -#define SX_DEBUG_TX 0x0040 -#define SX_DEBUG_IRQ 0x0080 -#define SX_DEBUG_OPEN 0x0100 -#define SX_DEBUG_TERMIOS 0x0200 -#define SX_DEBUG_SIGNALS 0x0400 -#define SX_DEBUG_FIFO 0x0800 - - -#define func_enter() dprintk(SX_DEBUG_FLOW, "io8: enter %s\n", __func__) -#define func_exit() dprintk(SX_DEBUG_FLOW, "io8: exit %s\n", __func__) - - -/* Configurable options: */ - -/* Am I paranoid or not ? ;-) */ -#define SPECIALIX_PARANOIA_CHECK - -/* - * The following defines are mostly for testing purposes. But if you need - * some nice reporting in your syslog, you can define them also. - */ -#undef SX_REPORT_FIFO -#undef SX_REPORT_OVERRUN - - - - -#define SPECIALIX_LEGAL_FLAGS \ - (ASYNC_HUP_NOTIFY | ASYNC_SAK | ASYNC_SPLIT_TERMIOS | \ - ASYNC_SPD_HI | ASYNC_SPEED_VHI | ASYNC_SESSION_LOCKOUT | \ - ASYNC_PGRP_LOCKOUT | ASYNC_CALLOUT_NOHUP) - -static struct tty_driver *specialix_driver; - -static struct specialix_board sx_board[SX_NBOARD] = { - { 0, SX_IOBASE1, 9, }, - { 0, SX_IOBASE2, 11, }, - { 0, SX_IOBASE3, 12, }, - { 0, SX_IOBASE4, 15, }, -}; - -static struct specialix_port sx_port[SX_NBOARD * SX_NPORT]; - - -static int sx_paranoia_check(struct specialix_port const *port, - char *name, const char *routine) -{ -#ifdef SPECIALIX_PARANOIA_CHECK - static const char *badmagic = KERN_ERR - "sx: Warning: bad specialix port magic number for device %s in %s\n"; - static const char *badinfo = KERN_ERR - "sx: Warning: null specialix port for device %s in %s\n"; - - if (!port) { - printk(badinfo, name, routine); - return 1; - } - if (port->magic != SPECIALIX_MAGIC) { - printk(badmagic, name, routine); - return 1; - } -#endif - return 0; -} - - -/* - * - * Service functions for specialix IO8+ driver. - * - */ - -/* Get board number from pointer */ -static inline int board_No(struct specialix_board *bp) -{ - return bp - sx_board; -} - - -/* Get port number from pointer */ -static inline int port_No(struct specialix_port const *port) -{ - return SX_PORT(port - sx_port); -} - - -/* Get pointer to board from pointer to port */ -static inline struct specialix_board *port_Board( - struct specialix_port const *port) -{ - return &sx_board[SX_BOARD(port - sx_port)]; -} - - -/* Input Byte from CL CD186x register */ -static inline unsigned char sx_in(struct specialix_board *bp, - unsigned short reg) -{ - bp->reg = reg | 0x80; - outb(reg | 0x80, bp->base + SX_ADDR_REG); - return inb(bp->base + SX_DATA_REG); -} - - -/* Output Byte to CL CD186x register */ -static inline void sx_out(struct specialix_board *bp, unsigned short reg, - unsigned char val) -{ - bp->reg = reg | 0x80; - outb(reg | 0x80, bp->base + SX_ADDR_REG); - outb(val, bp->base + SX_DATA_REG); -} - - -/* Input Byte from CL CD186x register */ -static inline unsigned char sx_in_off(struct specialix_board *bp, - unsigned short reg) -{ - bp->reg = reg; - outb(reg, bp->base + SX_ADDR_REG); - return inb(bp->base + SX_DATA_REG); -} - - -/* Output Byte to CL CD186x register */ -static inline void sx_out_off(struct specialix_board *bp, - unsigned short reg, unsigned char val) -{ - bp->reg = reg; - outb(reg, bp->base + SX_ADDR_REG); - outb(val, bp->base + SX_DATA_REG); -} - - -/* Wait for Channel Command Register ready */ -static void sx_wait_CCR(struct specialix_board *bp) -{ - unsigned long delay, flags; - unsigned char ccr; - - for (delay = SX_CCR_TIMEOUT; delay; delay--) { - spin_lock_irqsave(&bp->lock, flags); - ccr = sx_in(bp, CD186x_CCR); - spin_unlock_irqrestore(&bp->lock, flags); - if (!ccr) - return; - udelay(1); - } - - printk(KERN_ERR "sx%d: Timeout waiting for CCR.\n", board_No(bp)); -} - - -/* Wait for Channel Command Register ready */ -static void sx_wait_CCR_off(struct specialix_board *bp) -{ - unsigned long delay; - unsigned char crr; - unsigned long flags; - - for (delay = SX_CCR_TIMEOUT; delay; delay--) { - spin_lock_irqsave(&bp->lock, flags); - crr = sx_in_off(bp, CD186x_CCR); - spin_unlock_irqrestore(&bp->lock, flags); - if (!crr) - return; - udelay(1); - } - - printk(KERN_ERR "sx%d: Timeout waiting for CCR.\n", board_No(bp)); -} - - -/* - * specialix IO8+ IO range functions. - */ - -static int sx_request_io_range(struct specialix_board *bp) -{ - return request_region(bp->base, - bp->flags & SX_BOARD_IS_PCI ? SX_PCI_IO_SPACE : SX_IO_SPACE, - "specialix IO8+") == NULL; -} - - -static void sx_release_io_range(struct specialix_board *bp) -{ - release_region(bp->base, bp->flags & SX_BOARD_IS_PCI ? - SX_PCI_IO_SPACE : SX_IO_SPACE); -} - - -/* Set the IRQ using the RTS lines that run to the PAL on the board.... */ -static int sx_set_irq(struct specialix_board *bp) -{ - int virq; - int i; - unsigned long flags; - - if (bp->flags & SX_BOARD_IS_PCI) - return 1; - switch (bp->irq) { - /* In the same order as in the docs... */ - case 15: - virq = 0; - break; - case 12: - virq = 1; - break; - case 11: - virq = 2; - break; - case 9: - virq = 3; - break; - default:printk(KERN_ERR - "Speclialix: cannot set irq to %d.\n", bp->irq); - return 0; - } - spin_lock_irqsave(&bp->lock, flags); - for (i = 0; i < 2; i++) { - sx_out(bp, CD186x_CAR, i); - sx_out(bp, CD186x_MSVRTS, ((virq >> i) & 0x1)? MSVR_RTS:0); - } - spin_unlock_irqrestore(&bp->lock, flags); - return 1; -} - - -/* Reset and setup CD186x chip */ -static int sx_init_CD186x(struct specialix_board *bp) -{ - unsigned long flags; - int scaler; - int rv = 1; - - func_enter(); - sx_wait_CCR_off(bp); /* Wait for CCR ready */ - spin_lock_irqsave(&bp->lock, flags); - sx_out_off(bp, CD186x_CCR, CCR_HARDRESET); /* Reset CD186x chip */ - spin_unlock_irqrestore(&bp->lock, flags); - msleep(50); /* Delay 0.05 sec */ - spin_lock_irqsave(&bp->lock, flags); - sx_out_off(bp, CD186x_GIVR, SX_ID); /* Set ID for this chip */ - sx_out_off(bp, CD186x_GICR, 0); /* Clear all bits */ - sx_out_off(bp, CD186x_PILR1, SX_ACK_MINT); /* Prio for modem intr */ - sx_out_off(bp, CD186x_PILR2, SX_ACK_TINT); /* Prio for transmitter intr */ - sx_out_off(bp, CD186x_PILR3, SX_ACK_RINT); /* Prio for receiver intr */ - /* Set RegAckEn */ - sx_out_off(bp, CD186x_SRCR, sx_in(bp, CD186x_SRCR) | SRCR_REGACKEN); - - /* Setting up prescaler. We need 4 ticks per 1 ms */ - scaler = SX_OSCFREQ/SPECIALIX_TPS; - - sx_out_off(bp, CD186x_PPRH, scaler >> 8); - sx_out_off(bp, CD186x_PPRL, scaler & 0xff); - spin_unlock_irqrestore(&bp->lock, flags); - - if (!sx_set_irq(bp)) { - /* Figure out how to pass this along... */ - printk(KERN_ERR "Cannot set irq to %d.\n", bp->irq); - rv = 0; - } - - func_exit(); - return rv; -} - - -static int read_cross_byte(struct specialix_board *bp, int reg, int bit) -{ - int i; - int t; - unsigned long flags; - - spin_lock_irqsave(&bp->lock, flags); - for (i = 0, t = 0; i < 8; i++) { - sx_out_off(bp, CD186x_CAR, i); - if (sx_in_off(bp, reg) & bit) - t |= 1 << i; - } - spin_unlock_irqrestore(&bp->lock, flags); - - return t; -} - - -/* Main probing routine, also sets irq. */ -static int sx_probe(struct specialix_board *bp) -{ - unsigned char val1, val2; - int rev; - int chip; - - func_enter(); - - if (sx_request_io_range(bp)) { - func_exit(); - return 1; - } - - /* Are the I/O ports here ? */ - sx_out_off(bp, CD186x_PPRL, 0x5a); - udelay(1); - val1 = sx_in_off(bp, CD186x_PPRL); - - sx_out_off(bp, CD186x_PPRL, 0xa5); - udelay(1); - val2 = sx_in_off(bp, CD186x_PPRL); - - - if (val1 != 0x5a || val2 != 0xa5) { - printk(KERN_INFO - "sx%d: specialix IO8+ Board at 0x%03x not found.\n", - board_No(bp), bp->base); - sx_release_io_range(bp); - func_exit(); - return 1; - } - - /* Check the DSR lines that Specialix uses as board - identification */ - val1 = read_cross_byte(bp, CD186x_MSVR, MSVR_DSR); - val2 = read_cross_byte(bp, CD186x_MSVR, MSVR_RTS); - dprintk(SX_DEBUG_INIT, - "sx%d: DSR lines are: %02x, rts lines are: %02x\n", - board_No(bp), val1, val2); - - /* They managed to switch the bit order between the docs and - the IO8+ card. The new PCI card now conforms to old docs. - They changed the PCI docs to reflect the situation on the - old card. */ - val2 = (bp->flags & SX_BOARD_IS_PCI)?0x4d : 0xb2; - if (val1 != val2) { - printk(KERN_INFO - "sx%d: specialix IO8+ ID %02x at 0x%03x not found (%02x).\n", - board_No(bp), val2, bp->base, val1); - sx_release_io_range(bp); - func_exit(); - return 1; - } - - - /* Reset CD186x again */ - if (!sx_init_CD186x(bp)) { - sx_release_io_range(bp); - func_exit(); - return 1; - } - - sx_request_io_range(bp); - bp->flags |= SX_BOARD_PRESENT; - - /* Chip revcode pkgtype - GFRCR SRCR bit 7 - CD180 rev B 0x81 0 - CD180 rev C 0x82 0 - CD1864 rev A 0x82 1 - CD1865 rev A 0x83 1 -- Do not use!!! Does not work. - CD1865 rev B 0x84 1 - -- Thanks to Gwen Wang, Cirrus Logic. - */ - - switch (sx_in_off(bp, CD186x_GFRCR)) { - case 0x82: - chip = 1864; - rev = 'A'; - break; - case 0x83: - chip = 1865; - rev = 'A'; - break; - case 0x84: - chip = 1865; - rev = 'B'; - break; - case 0x85: - chip = 1865; - rev = 'C'; - break; /* Does not exist at this time */ - default: - chip = -1; - rev = 'x'; - } - - dprintk(SX_DEBUG_INIT, " GFCR = 0x%02x\n", sx_in_off(bp, CD186x_GFRCR)); - - printk(KERN_INFO - "sx%d: specialix IO8+ board detected at 0x%03x, IRQ %d, CD%d Rev. %c.\n", - board_No(bp), bp->base, bp->irq, chip, rev); - - func_exit(); - return 0; -} - -/* - * - * Interrupt processing routines. - * */ - -static struct specialix_port *sx_get_port(struct specialix_board *bp, - unsigned char const *what) -{ - unsigned char channel; - struct specialix_port *port = NULL; - - channel = sx_in(bp, CD186x_GICR) >> GICR_CHAN_OFF; - dprintk(SX_DEBUG_CHAN, "channel: %d\n", channel); - if (channel < CD186x_NCH) { - port = &sx_port[board_No(bp) * SX_NPORT + channel]; - dprintk(SX_DEBUG_CHAN, "port: %d %p flags: 0x%lx\n", - board_No(bp) * SX_NPORT + channel, port, - port->port.flags & ASYNC_INITIALIZED); - - if (port->port.flags & ASYNC_INITIALIZED) { - dprintk(SX_DEBUG_CHAN, "port: %d %p\n", channel, port); - func_exit(); - return port; - } - } - printk(KERN_INFO "sx%d: %s interrupt from invalid port %d\n", - board_No(bp), what, channel); - return NULL; -} - - -static void sx_receive_exc(struct specialix_board *bp) -{ - struct specialix_port *port; - struct tty_struct *tty; - unsigned char status; - unsigned char ch, flag; - - func_enter(); - - port = sx_get_port(bp, "Receive"); - if (!port) { - dprintk(SX_DEBUG_RX, "Hmm, couldn't find port.\n"); - func_exit(); - return; - } - tty = port->port.tty; - - status = sx_in(bp, CD186x_RCSR); - - dprintk(SX_DEBUG_RX, "status: 0x%x\n", status); - if (status & RCSR_OE) { - port->overrun++; - dprintk(SX_DEBUG_FIFO, - "sx%d: port %d: Overrun. Total %ld overruns.\n", - board_No(bp), port_No(port), port->overrun); - } - status &= port->mark_mask; - - /* This flip buffer check needs to be below the reading of the - status register to reset the chip's IRQ.... */ - if (tty_buffer_request_room(tty, 1) == 0) { - dprintk(SX_DEBUG_FIFO, - "sx%d: port %d: Working around flip buffer overflow.\n", - board_No(bp), port_No(port)); - func_exit(); - return; - } - - ch = sx_in(bp, CD186x_RDR); - if (!status) { - func_exit(); - return; - } - if (status & RCSR_TOUT) { - printk(KERN_INFO - "sx%d: port %d: Receiver timeout. Hardware problems ?\n", - board_No(bp), port_No(port)); - func_exit(); - return; - - } else if (status & RCSR_BREAK) { - dprintk(SX_DEBUG_RX, "sx%d: port %d: Handling break...\n", - board_No(bp), port_No(port)); - flag = TTY_BREAK; - if (port->port.flags & ASYNC_SAK) - do_SAK(tty); - - } else if (status & RCSR_PE) - flag = TTY_PARITY; - - else if (status & RCSR_FE) - flag = TTY_FRAME; - - else if (status & RCSR_OE) - flag = TTY_OVERRUN; - - else - flag = TTY_NORMAL; - - if (tty_insert_flip_char(tty, ch, flag)) - tty_flip_buffer_push(tty); - func_exit(); -} - - -static void sx_receive(struct specialix_board *bp) -{ - struct specialix_port *port; - struct tty_struct *tty; - unsigned char count; - - func_enter(); - - port = sx_get_port(bp, "Receive"); - if (port == NULL) { - dprintk(SX_DEBUG_RX, "Hmm, couldn't find port.\n"); - func_exit(); - return; - } - tty = port->port.tty; - - count = sx_in(bp, CD186x_RDCR); - dprintk(SX_DEBUG_RX, "port: %p: count: %d\n", port, count); - port->hits[count > 8 ? 9 : count]++; - - while (count--) - tty_insert_flip_char(tty, sx_in(bp, CD186x_RDR), TTY_NORMAL); - tty_flip_buffer_push(tty); - func_exit(); -} - - -static void sx_transmit(struct specialix_board *bp) -{ - struct specialix_port *port; - struct tty_struct *tty; - unsigned char count; - - func_enter(); - port = sx_get_port(bp, "Transmit"); - if (port == NULL) { - func_exit(); - return; - } - dprintk(SX_DEBUG_TX, "port: %p\n", port); - tty = port->port.tty; - - if (port->IER & IER_TXEMPTY) { - /* FIFO drained */ - sx_out(bp, CD186x_CAR, port_No(port)); - port->IER &= ~IER_TXEMPTY; - sx_out(bp, CD186x_IER, port->IER); - func_exit(); - return; - } - - if ((port->xmit_cnt <= 0 && !port->break_length) - || tty->stopped || tty->hw_stopped) { - sx_out(bp, CD186x_CAR, port_No(port)); - port->IER &= ~IER_TXRDY; - sx_out(bp, CD186x_IER, port->IER); - func_exit(); - return; - } - - if (port->break_length) { - if (port->break_length > 0) { - if (port->COR2 & COR2_ETC) { - sx_out(bp, CD186x_TDR, CD186x_C_ESC); - sx_out(bp, CD186x_TDR, CD186x_C_SBRK); - port->COR2 &= ~COR2_ETC; - } - count = min_t(int, port->break_length, 0xff); - sx_out(bp, CD186x_TDR, CD186x_C_ESC); - sx_out(bp, CD186x_TDR, CD186x_C_DELAY); - sx_out(bp, CD186x_TDR, count); - port->break_length -= count; - if (port->break_length == 0) - port->break_length--; - } else { - sx_out(bp, CD186x_TDR, CD186x_C_ESC); - sx_out(bp, CD186x_TDR, CD186x_C_EBRK); - sx_out(bp, CD186x_COR2, port->COR2); - sx_wait_CCR(bp); - sx_out(bp, CD186x_CCR, CCR_CORCHG2); - port->break_length = 0; - } - - func_exit(); - return; - } - - count = CD186x_NFIFO; - do { - sx_out(bp, CD186x_TDR, port->xmit_buf[port->xmit_tail++]); - port->xmit_tail = port->xmit_tail & (SERIAL_XMIT_SIZE-1); - if (--port->xmit_cnt <= 0) - break; - } while (--count > 0); - - if (port->xmit_cnt <= 0) { - sx_out(bp, CD186x_CAR, port_No(port)); - port->IER &= ~IER_TXRDY; - sx_out(bp, CD186x_IER, port->IER); - } - if (port->xmit_cnt <= port->wakeup_chars) - tty_wakeup(tty); - - func_exit(); -} - - -static void sx_check_modem(struct specialix_board *bp) -{ - struct specialix_port *port; - struct tty_struct *tty; - unsigned char mcr; - int msvr_cd; - - dprintk(SX_DEBUG_SIGNALS, "Modem intr. "); - port = sx_get_port(bp, "Modem"); - if (port == NULL) - return; - - tty = port->port.tty; - - mcr = sx_in(bp, CD186x_MCR); - - if ((mcr & MCR_CDCHG)) { - dprintk(SX_DEBUG_SIGNALS, "CD just changed... "); - msvr_cd = sx_in(bp, CD186x_MSVR) & MSVR_CD; - if (msvr_cd) { - dprintk(SX_DEBUG_SIGNALS, "Waking up guys in open.\n"); - wake_up_interruptible(&port->port.open_wait); - } else { - dprintk(SX_DEBUG_SIGNALS, "Sending HUP.\n"); - tty_hangup(tty); - } - } - -#ifdef SPECIALIX_BRAIN_DAMAGED_CTS - if (mcr & MCR_CTSCHG) { - if (sx_in(bp, CD186x_MSVR) & MSVR_CTS) { - tty->hw_stopped = 0; - port->IER |= IER_TXRDY; - if (port->xmit_cnt <= port->wakeup_chars) - tty_wakeup(tty); - } else { - tty->hw_stopped = 1; - port->IER &= ~IER_TXRDY; - } - sx_out(bp, CD186x_IER, port->IER); - } - if (mcr & MCR_DSSXHG) { - if (sx_in(bp, CD186x_MSVR) & MSVR_DSR) { - tty->hw_stopped = 0; - port->IER |= IER_TXRDY; - if (port->xmit_cnt <= port->wakeup_chars) - tty_wakeup(tty); - } else { - tty->hw_stopped = 1; - port->IER &= ~IER_TXRDY; - } - sx_out(bp, CD186x_IER, port->IER); - } -#endif /* SPECIALIX_BRAIN_DAMAGED_CTS */ - - /* Clear change bits */ - sx_out(bp, CD186x_MCR, 0); -} - - -/* The main interrupt processing routine */ -static irqreturn_t sx_interrupt(int dummy, void *dev_id) -{ - unsigned char status; - unsigned char ack; - struct specialix_board *bp = dev_id; - unsigned long loop = 0; - int saved_reg; - unsigned long flags; - - func_enter(); - - spin_lock_irqsave(&bp->lock, flags); - - dprintk(SX_DEBUG_FLOW, "enter %s port %d room: %ld\n", __func__, - port_No(sx_get_port(bp, "INT")), - SERIAL_XMIT_SIZE - sx_get_port(bp, "ITN")->xmit_cnt - 1); - if (!(bp->flags & SX_BOARD_ACTIVE)) { - dprintk(SX_DEBUG_IRQ, "sx: False interrupt. irq %d.\n", - bp->irq); - spin_unlock_irqrestore(&bp->lock, flags); - func_exit(); - return IRQ_NONE; - } - - saved_reg = bp->reg; - - while (++loop < 16) { - status = sx_in(bp, CD186x_SRSR) & - (SRSR_RREQint | SRSR_TREQint | SRSR_MREQint); - if (status == 0) - break; - if (status & SRSR_RREQint) { - ack = sx_in(bp, CD186x_RRAR); - - if (ack == (SX_ID | GIVR_IT_RCV)) - sx_receive(bp); - else if (ack == (SX_ID | GIVR_IT_REXC)) - sx_receive_exc(bp); - else - printk(KERN_ERR - "sx%d: status: 0x%x Bad receive ack 0x%02x.\n", - board_No(bp), status, ack); - - } else if (status & SRSR_TREQint) { - ack = sx_in(bp, CD186x_TRAR); - - if (ack == (SX_ID | GIVR_IT_TX)) - sx_transmit(bp); - else - printk(KERN_ERR "sx%d: status: 0x%x Bad transmit ack 0x%02x. port: %d\n", - board_No(bp), status, ack, - port_No(sx_get_port(bp, "Int"))); - } else if (status & SRSR_MREQint) { - ack = sx_in(bp, CD186x_MRAR); - - if (ack == (SX_ID | GIVR_IT_MODEM)) - sx_check_modem(bp); - else - printk(KERN_ERR - "sx%d: status: 0x%x Bad modem ack 0x%02x.\n", - board_No(bp), status, ack); - - } - - sx_out(bp, CD186x_EOIR, 0); /* Mark end of interrupt */ - } - bp->reg = saved_reg; - outb(bp->reg, bp->base + SX_ADDR_REG); - spin_unlock_irqrestore(&bp->lock, flags); - func_exit(); - return IRQ_HANDLED; -} - - -/* - * Routines for open & close processing. - */ - -static void turn_ints_off(struct specialix_board *bp) -{ - unsigned long flags; - - func_enter(); - spin_lock_irqsave(&bp->lock, flags); - (void) sx_in_off(bp, 0); /* Turn off interrupts. */ - spin_unlock_irqrestore(&bp->lock, flags); - - func_exit(); -} - -static void turn_ints_on(struct specialix_board *bp) -{ - unsigned long flags; - - func_enter(); - - spin_lock_irqsave(&bp->lock, flags); - (void) sx_in(bp, 0); /* Turn ON interrupts. */ - spin_unlock_irqrestore(&bp->lock, flags); - - func_exit(); -} - - -/* Called with disabled interrupts */ -static int sx_setup_board(struct specialix_board *bp) -{ - int error; - - if (bp->flags & SX_BOARD_ACTIVE) - return 0; - - if (bp->flags & SX_BOARD_IS_PCI) - error = request_irq(bp->irq, sx_interrupt, - IRQF_DISABLED | IRQF_SHARED, "specialix IO8+", bp); - else - error = request_irq(bp->irq, sx_interrupt, - IRQF_DISABLED, "specialix IO8+", bp); - - if (error) - return error; - - turn_ints_on(bp); - bp->flags |= SX_BOARD_ACTIVE; - - return 0; -} - - -/* Called with disabled interrupts */ -static void sx_shutdown_board(struct specialix_board *bp) -{ - func_enter(); - - if (!(bp->flags & SX_BOARD_ACTIVE)) { - func_exit(); - return; - } - - bp->flags &= ~SX_BOARD_ACTIVE; - - dprintk(SX_DEBUG_IRQ, "Freeing IRQ%d for board %d.\n", - bp->irq, board_No(bp)); - free_irq(bp->irq, bp); - turn_ints_off(bp); - func_exit(); -} - -static unsigned int sx_crtscts(struct tty_struct *tty) -{ - if (sx_rtscts) - return C_CRTSCTS(tty); - return 1; -} - -/* - * Setting up port characteristics. - * Must be called with disabled interrupts - */ -static void sx_change_speed(struct specialix_board *bp, - struct specialix_port *port) -{ - struct tty_struct *tty; - unsigned long baud; - long tmp; - unsigned char cor1 = 0, cor3 = 0; - unsigned char mcor1 = 0, mcor2 = 0; - static unsigned long again; - unsigned long flags; - - func_enter(); - - tty = port->port.tty; - if (!tty || !tty->termios) { - func_exit(); - return; - } - - port->IER = 0; - port->COR2 = 0; - /* Select port on the board */ - spin_lock_irqsave(&bp->lock, flags); - sx_out(bp, CD186x_CAR, port_No(port)); - - /* The Specialix board doens't implement the RTS lines. - They are used to set the IRQ level. Don't touch them. */ - if (sx_crtscts(tty)) - port->MSVR = MSVR_DTR | (sx_in(bp, CD186x_MSVR) & MSVR_RTS); - else - port->MSVR = (sx_in(bp, CD186x_MSVR) & MSVR_RTS); - spin_unlock_irqrestore(&bp->lock, flags); - dprintk(SX_DEBUG_TERMIOS, "sx: got MSVR=%02x.\n", port->MSVR); - baud = tty_get_baud_rate(tty); - - if (baud == 38400) { - if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) - baud = 57600; - if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) - baud = 115200; - } - - if (!baud) { - /* Drop DTR & exit */ - dprintk(SX_DEBUG_TERMIOS, "Dropping DTR... Hmm....\n"); - if (!sx_crtscts(tty)) { - port->MSVR &= ~MSVR_DTR; - spin_lock_irqsave(&bp->lock, flags); - sx_out(bp, CD186x_MSVR, port->MSVR); - spin_unlock_irqrestore(&bp->lock, flags); - } else - dprintk(SX_DEBUG_TERMIOS, "Can't drop DTR: no DTR.\n"); - return; - } else { - /* Set DTR on */ - if (!sx_crtscts(tty)) - port->MSVR |= MSVR_DTR; - } - - /* - * Now we must calculate some speed depended things - */ - - /* Set baud rate for port */ - tmp = port->custom_divisor ; - if (tmp) - printk(KERN_INFO - "sx%d: Using custom baud rate divisor %ld. \n" - "This is an untested option, please be careful.\n", - port_No(port), tmp); - else - tmp = (((SX_OSCFREQ + baud/2) / baud + CD186x_TPC/2) / - CD186x_TPC); - - if (tmp < 0x10 && time_before(again, jiffies)) { - again = jiffies + HZ * 60; - /* Page 48 of version 2.0 of the CL-CD1865 databook */ - if (tmp >= 12) { - printk(KERN_INFO "sx%d: Baud rate divisor is %ld. \n" - "Performance degradation is possible.\n" - "Read specialix.txt for more info.\n", - port_No(port), tmp); - } else { - printk(KERN_INFO "sx%d: Baud rate divisor is %ld. \n" - "Warning: overstressing Cirrus chip. This might not work.\n" - "Read specialix.txt for more info.\n", port_No(port), tmp); - } - } - spin_lock_irqsave(&bp->lock, flags); - sx_out(bp, CD186x_RBPRH, (tmp >> 8) & 0xff); - sx_out(bp, CD186x_TBPRH, (tmp >> 8) & 0xff); - sx_out(bp, CD186x_RBPRL, tmp & 0xff); - sx_out(bp, CD186x_TBPRL, tmp & 0xff); - spin_unlock_irqrestore(&bp->lock, flags); - if (port->custom_divisor) - baud = (SX_OSCFREQ + port->custom_divisor/2) / - port->custom_divisor; - baud = (baud + 5) / 10; /* Estimated CPS */ - - /* Two timer ticks seems enough to wakeup something like SLIP driver */ - tmp = ((baud + HZ/2) / HZ) * 2 - CD186x_NFIFO; - port->wakeup_chars = (tmp < 0) ? 0 : ((tmp >= SERIAL_XMIT_SIZE) ? - SERIAL_XMIT_SIZE - 1 : tmp); - - /* Receiver timeout will be transmission time for 1.5 chars */ - tmp = (SPECIALIX_TPS + SPECIALIX_TPS/2 + baud/2) / baud; - tmp = (tmp > 0xff) ? 0xff : tmp; - spin_lock_irqsave(&bp->lock, flags); - sx_out(bp, CD186x_RTPR, tmp); - spin_unlock_irqrestore(&bp->lock, flags); - switch (C_CSIZE(tty)) { - case CS5: - cor1 |= COR1_5BITS; - break; - case CS6: - cor1 |= COR1_6BITS; - break; - case CS7: - cor1 |= COR1_7BITS; - break; - case CS8: - cor1 |= COR1_8BITS; - break; - } - - if (C_CSTOPB(tty)) - cor1 |= COR1_2SB; - - cor1 |= COR1_IGNORE; - if (C_PARENB(tty)) { - cor1 |= COR1_NORMPAR; - if (C_PARODD(tty)) - cor1 |= COR1_ODDP; - if (I_INPCK(tty)) - cor1 &= ~COR1_IGNORE; - } - /* Set marking of some errors */ - port->mark_mask = RCSR_OE | RCSR_TOUT; - if (I_INPCK(tty)) - port->mark_mask |= RCSR_FE | RCSR_PE; - if (I_BRKINT(tty) || I_PARMRK(tty)) - port->mark_mask |= RCSR_BREAK; - if (I_IGNPAR(tty)) - port->mark_mask &= ~(RCSR_FE | RCSR_PE); - if (I_IGNBRK(tty)) { - port->mark_mask &= ~RCSR_BREAK; - if (I_IGNPAR(tty)) - /* Real raw mode. Ignore all */ - port->mark_mask &= ~RCSR_OE; - } - /* Enable Hardware Flow Control */ - if (C_CRTSCTS(tty)) { -#ifdef SPECIALIX_BRAIN_DAMAGED_CTS - port->IER |= IER_DSR | IER_CTS; - mcor1 |= MCOR1_DSRZD | MCOR1_CTSZD; - mcor2 |= MCOR2_DSROD | MCOR2_CTSOD; - spin_lock_irqsave(&bp->lock, flags); - tty->hw_stopped = !(sx_in(bp, CD186x_MSVR) & - (MSVR_CTS|MSVR_DSR)); - spin_unlock_irqrestore(&bp->lock, flags); -#else - port->COR2 |= COR2_CTSAE; -#endif - } - /* Enable Software Flow Control. FIXME: I'm not sure about this */ - /* Some people reported that it works, but I still doubt it */ - if (I_IXON(tty)) { - port->COR2 |= COR2_TXIBE; - cor3 |= (COR3_FCT | COR3_SCDE); - if (I_IXANY(tty)) - port->COR2 |= COR2_IXM; - spin_lock_irqsave(&bp->lock, flags); - sx_out(bp, CD186x_SCHR1, START_CHAR(tty)); - sx_out(bp, CD186x_SCHR2, STOP_CHAR(tty)); - sx_out(bp, CD186x_SCHR3, START_CHAR(tty)); - sx_out(bp, CD186x_SCHR4, STOP_CHAR(tty)); - spin_unlock_irqrestore(&bp->lock, flags); - } - if (!C_CLOCAL(tty)) { - /* Enable CD check */ - port->IER |= IER_CD; - mcor1 |= MCOR1_CDZD; - mcor2 |= MCOR2_CDOD; - } - - if (C_CREAD(tty)) - /* Enable receiver */ - port->IER |= IER_RXD; - - /* Set input FIFO size (1-8 bytes) */ - cor3 |= sx_rxfifo; - /* Setting up CD186x channel registers */ - spin_lock_irqsave(&bp->lock, flags); - sx_out(bp, CD186x_COR1, cor1); - sx_out(bp, CD186x_COR2, port->COR2); - sx_out(bp, CD186x_COR3, cor3); - spin_unlock_irqrestore(&bp->lock, flags); - /* Make CD186x know about registers change */ - sx_wait_CCR(bp); - spin_lock_irqsave(&bp->lock, flags); - sx_out(bp, CD186x_CCR, CCR_CORCHG1 | CCR_CORCHG2 | CCR_CORCHG3); - /* Setting up modem option registers */ - dprintk(SX_DEBUG_TERMIOS, "Mcor1 = %02x, mcor2 = %02x.\n", - mcor1, mcor2); - sx_out(bp, CD186x_MCOR1, mcor1); - sx_out(bp, CD186x_MCOR2, mcor2); - spin_unlock_irqrestore(&bp->lock, flags); - /* Enable CD186x transmitter & receiver */ - sx_wait_CCR(bp); - spin_lock_irqsave(&bp->lock, flags); - sx_out(bp, CD186x_CCR, CCR_TXEN | CCR_RXEN); - /* Enable interrupts */ - sx_out(bp, CD186x_IER, port->IER); - /* And finally set the modem lines... */ - sx_out(bp, CD186x_MSVR, port->MSVR); - spin_unlock_irqrestore(&bp->lock, flags); - - func_exit(); -} - - -/* Must be called with interrupts enabled */ -static int sx_setup_port(struct specialix_board *bp, - struct specialix_port *port) -{ - unsigned long flags; - - func_enter(); - - if (port->port.flags & ASYNC_INITIALIZED) { - func_exit(); - return 0; - } - - if (!port->xmit_buf) { - /* We may sleep in get_zeroed_page() */ - unsigned long tmp; - - tmp = get_zeroed_page(GFP_KERNEL); - if (tmp == 0L) { - func_exit(); - return -ENOMEM; - } - - if (port->xmit_buf) { - free_page(tmp); - func_exit(); - return -ERESTARTSYS; - } - port->xmit_buf = (unsigned char *) tmp; - } - - spin_lock_irqsave(&port->lock, flags); - - if (port->port.tty) - clear_bit(TTY_IO_ERROR, &port->port.tty->flags); - - port->xmit_cnt = port->xmit_head = port->xmit_tail = 0; - sx_change_speed(bp, port); - port->port.flags |= ASYNC_INITIALIZED; - - spin_unlock_irqrestore(&port->lock, flags); - - - func_exit(); - return 0; -} - - -/* Must be called with interrupts disabled */ -static void sx_shutdown_port(struct specialix_board *bp, - struct specialix_port *port) -{ - struct tty_struct *tty; - int i; - unsigned long flags; - - func_enter(); - - if (!(port->port.flags & ASYNC_INITIALIZED)) { - func_exit(); - return; - } - - if (sx_debug & SX_DEBUG_FIFO) { - dprintk(SX_DEBUG_FIFO, - "sx%d: port %d: %ld overruns, FIFO hits [ ", - board_No(bp), port_No(port), port->overrun); - for (i = 0; i < 10; i++) - dprintk(SX_DEBUG_FIFO, "%ld ", port->hits[i]); - dprintk(SX_DEBUG_FIFO, "].\n"); - } - - if (port->xmit_buf) { - free_page((unsigned long) port->xmit_buf); - port->xmit_buf = NULL; - } - - /* Select port */ - spin_lock_irqsave(&bp->lock, flags); - sx_out(bp, CD186x_CAR, port_No(port)); - - tty = port->port.tty; - if (tty == NULL || C_HUPCL(tty)) { - /* Drop DTR */ - sx_out(bp, CD186x_MSVDTR, 0); - } - spin_unlock_irqrestore(&bp->lock, flags); - /* Reset port */ - sx_wait_CCR(bp); - spin_lock_irqsave(&bp->lock, flags); - sx_out(bp, CD186x_CCR, CCR_SOFTRESET); - /* Disable all interrupts from this port */ - port->IER = 0; - sx_out(bp, CD186x_IER, port->IER); - spin_unlock_irqrestore(&bp->lock, flags); - if (tty) - set_bit(TTY_IO_ERROR, &tty->flags); - port->port.flags &= ~ASYNC_INITIALIZED; - - if (!bp->count) - sx_shutdown_board(bp); - func_exit(); -} - - -static int block_til_ready(struct tty_struct *tty, struct file *filp, - struct specialix_port *port) -{ - DECLARE_WAITQUEUE(wait, current); - struct specialix_board *bp = port_Board(port); - int retval; - int do_clocal = 0; - int CD; - unsigned long flags; - - func_enter(); - - /* - * If the device is in the middle of being closed, then block - * until it's done, and then try again. - */ - if (tty_hung_up_p(filp) || port->port.flags & ASYNC_CLOSING) { - interruptible_sleep_on(&port->port.close_wait); - if (port->port.flags & ASYNC_HUP_NOTIFY) { - func_exit(); - return -EAGAIN; - } else { - func_exit(); - return -ERESTARTSYS; - } - } - - /* - * If non-blocking mode is set, or the port is not enabled, - * then make the check up front and then exit. - */ - if ((filp->f_flags & O_NONBLOCK) || - (tty->flags & (1 << TTY_IO_ERROR))) { - port->port.flags |= ASYNC_NORMAL_ACTIVE; - func_exit(); - return 0; - } - - if (C_CLOCAL(tty)) - do_clocal = 1; - - /* - * Block waiting for the carrier detect and the line to become - * free (i.e., not in use by the callout). While we are in - * this loop, info->count is dropped by one, so that - * rs_close() knows when to free things. We restore it upon - * exit, either normal or abnormal. - */ - retval = 0; - add_wait_queue(&port->port.open_wait, &wait); - spin_lock_irqsave(&port->lock, flags); - if (!tty_hung_up_p(filp)) - port->port.count--; - spin_unlock_irqrestore(&port->lock, flags); - port->port.blocked_open++; - while (1) { - spin_lock_irqsave(&bp->lock, flags); - sx_out(bp, CD186x_CAR, port_No(port)); - CD = sx_in(bp, CD186x_MSVR) & MSVR_CD; - if (sx_crtscts(tty)) { - /* Activate RTS */ - port->MSVR |= MSVR_DTR; /* WTF? */ - sx_out(bp, CD186x_MSVR, port->MSVR); - } else { - /* Activate DTR */ - port->MSVR |= MSVR_DTR; - sx_out(bp, CD186x_MSVR, port->MSVR); - } - spin_unlock_irqrestore(&bp->lock, flags); - set_current_state(TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) || - !(port->port.flags & ASYNC_INITIALIZED)) { - if (port->port.flags & ASYNC_HUP_NOTIFY) - retval = -EAGAIN; - else - retval = -ERESTARTSYS; - break; - } - if (!(port->port.flags & ASYNC_CLOSING) && - (do_clocal || CD)) - break; - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } - tty_unlock(); - schedule(); - tty_lock(); - } - - set_current_state(TASK_RUNNING); - remove_wait_queue(&port->port.open_wait, &wait); - spin_lock_irqsave(&port->lock, flags); - if (!tty_hung_up_p(filp)) - port->port.count++; - port->port.blocked_open--; - spin_unlock_irqrestore(&port->lock, flags); - if (retval) { - func_exit(); - return retval; - } - - port->port.flags |= ASYNC_NORMAL_ACTIVE; - func_exit(); - return 0; -} - - -static int sx_open(struct tty_struct *tty, struct file *filp) -{ - int board; - int error; - struct specialix_port *port; - struct specialix_board *bp; - int i; - unsigned long flags; - - func_enter(); - - board = SX_BOARD(tty->index); - - if (board >= SX_NBOARD || !(sx_board[board].flags & SX_BOARD_PRESENT)) { - func_exit(); - return -ENODEV; - } - - bp = &sx_board[board]; - port = sx_port + board * SX_NPORT + SX_PORT(tty->index); - port->overrun = 0; - for (i = 0; i < 10; i++) - port->hits[i] = 0; - - dprintk(SX_DEBUG_OPEN, - "Board = %d, bp = %p, port = %p, portno = %d.\n", - board, bp, port, SX_PORT(tty->index)); - - if (sx_paranoia_check(port, tty->name, "sx_open")) { - func_enter(); - return -ENODEV; - } - - error = sx_setup_board(bp); - if (error) { - func_exit(); - return error; - } - - spin_lock_irqsave(&bp->lock, flags); - port->port.count++; - bp->count++; - tty->driver_data = port; - port->port.tty = tty; - spin_unlock_irqrestore(&bp->lock, flags); - - error = sx_setup_port(bp, port); - if (error) { - func_enter(); - return error; - } - - error = block_til_ready(tty, filp, port); - if (error) { - func_enter(); - return error; - } - - func_exit(); - return 0; -} - -static void sx_flush_buffer(struct tty_struct *tty) -{ - struct specialix_port *port = tty->driver_data; - unsigned long flags; - struct specialix_board *bp; - - func_enter(); - - if (sx_paranoia_check(port, tty->name, "sx_flush_buffer")) { - func_exit(); - return; - } - - bp = port_Board(port); - spin_lock_irqsave(&port->lock, flags); - port->xmit_cnt = port->xmit_head = port->xmit_tail = 0; - spin_unlock_irqrestore(&port->lock, flags); - tty_wakeup(tty); - - func_exit(); -} - -static void sx_close(struct tty_struct *tty, struct file *filp) -{ - struct specialix_port *port = tty->driver_data; - struct specialix_board *bp; - unsigned long flags; - unsigned long timeout; - - func_enter(); - if (!port || sx_paranoia_check(port, tty->name, "close")) { - func_exit(); - return; - } - spin_lock_irqsave(&port->lock, flags); - - if (tty_hung_up_p(filp)) { - spin_unlock_irqrestore(&port->lock, flags); - func_exit(); - return; - } - - bp = port_Board(port); - if (tty->count == 1 && port->port.count != 1) { - printk(KERN_ERR "sx%d: sx_close: bad port count;" - " tty->count is 1, port count is %d\n", - board_No(bp), port->port.count); - port->port.count = 1; - } - - if (port->port.count > 1) { - port->port.count--; - bp->count--; - - spin_unlock_irqrestore(&port->lock, flags); - - func_exit(); - return; - } - port->port.flags |= ASYNC_CLOSING; - /* - * Now we wait for the transmit buffer to clear; and we notify - * the line discipline to only process XON/XOFF characters. - */ - tty->closing = 1; - spin_unlock_irqrestore(&port->lock, flags); - dprintk(SX_DEBUG_OPEN, "Closing\n"); - if (port->port.closing_wait != ASYNC_CLOSING_WAIT_NONE) - tty_wait_until_sent(tty, port->port.closing_wait); - /* - * At this point we stop accepting input. To do this, we - * disable the receive line status interrupts, and tell the - * interrupt driver to stop checking the data ready bit in the - * line status register. - */ - dprintk(SX_DEBUG_OPEN, "Closed\n"); - port->IER &= ~IER_RXD; - if (port->port.flags & ASYNC_INITIALIZED) { - port->IER &= ~IER_TXRDY; - port->IER |= IER_TXEMPTY; - spin_lock_irqsave(&bp->lock, flags); - sx_out(bp, CD186x_CAR, port_No(port)); - sx_out(bp, CD186x_IER, port->IER); - spin_unlock_irqrestore(&bp->lock, flags); - /* - * Before we drop DTR, make sure the UART transmitter - * has completely drained; this is especially - * important if there is a transmit FIFO! - */ - timeout = jiffies+HZ; - while (port->IER & IER_TXEMPTY) { - set_current_state(TASK_INTERRUPTIBLE); - msleep_interruptible(jiffies_to_msecs(port->timeout)); - if (time_after(jiffies, timeout)) { - printk(KERN_INFO "Timeout waiting for close\n"); - break; - } - } - - } - - if (--bp->count < 0) { - printk(KERN_ERR - "sx%d: sx_shutdown_port: bad board count: %d port: %d\n", - board_No(bp), bp->count, tty->index); - bp->count = 0; - } - if (--port->port.count < 0) { - printk(KERN_ERR - "sx%d: sx_close: bad port count for tty%d: %d\n", - board_No(bp), port_No(port), port->port.count); - port->port.count = 0; - } - - sx_shutdown_port(bp, port); - sx_flush_buffer(tty); - tty_ldisc_flush(tty); - spin_lock_irqsave(&port->lock, flags); - tty->closing = 0; - port->port.tty = NULL; - spin_unlock_irqrestore(&port->lock, flags); - if (port->port.blocked_open) { - if (port->port.close_delay) - msleep_interruptible( - jiffies_to_msecs(port->port.close_delay)); - wake_up_interruptible(&port->port.open_wait); - } - port->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); - wake_up_interruptible(&port->port.close_wait); - - func_exit(); -} - - -static int sx_write(struct tty_struct *tty, - const unsigned char *buf, int count) -{ - struct specialix_port *port = tty->driver_data; - struct specialix_board *bp; - int c, total = 0; - unsigned long flags; - - func_enter(); - if (sx_paranoia_check(port, tty->name, "sx_write")) { - func_exit(); - return 0; - } - - bp = port_Board(port); - - if (!port->xmit_buf) { - func_exit(); - return 0; - } - - while (1) { - spin_lock_irqsave(&port->lock, flags); - c = min_t(int, count, min(SERIAL_XMIT_SIZE - port->xmit_cnt - 1, - SERIAL_XMIT_SIZE - port->xmit_head)); - if (c <= 0) { - spin_unlock_irqrestore(&port->lock, flags); - break; - } - memcpy(port->xmit_buf + port->xmit_head, buf, c); - port->xmit_head = (port->xmit_head + c) & (SERIAL_XMIT_SIZE-1); - port->xmit_cnt += c; - spin_unlock_irqrestore(&port->lock, flags); - - buf += c; - count -= c; - total += c; - } - - spin_lock_irqsave(&bp->lock, flags); - if (port->xmit_cnt && !tty->stopped && !tty->hw_stopped && - !(port->IER & IER_TXRDY)) { - port->IER |= IER_TXRDY; - sx_out(bp, CD186x_CAR, port_No(port)); - sx_out(bp, CD186x_IER, port->IER); - } - spin_unlock_irqrestore(&bp->lock, flags); - func_exit(); - - return total; -} - - -static int sx_put_char(struct tty_struct *tty, unsigned char ch) -{ - struct specialix_port *port = tty->driver_data; - unsigned long flags; - struct specialix_board *bp; - - func_enter(); - - if (sx_paranoia_check(port, tty->name, "sx_put_char")) { - func_exit(); - return 0; - } - dprintk(SX_DEBUG_TX, "check tty: %p %p\n", tty, port->xmit_buf); - if (!port->xmit_buf) { - func_exit(); - return 0; - } - bp = port_Board(port); - spin_lock_irqsave(&port->lock, flags); - - dprintk(SX_DEBUG_TX, "xmit_cnt: %d xmit_buf: %p\n", - port->xmit_cnt, port->xmit_buf); - if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1 || !port->xmit_buf) { - spin_unlock_irqrestore(&port->lock, flags); - dprintk(SX_DEBUG_TX, "Exit size\n"); - func_exit(); - return 0; - } - dprintk(SX_DEBUG_TX, "Handle xmit: %p %p\n", port, port->xmit_buf); - port->xmit_buf[port->xmit_head++] = ch; - port->xmit_head &= SERIAL_XMIT_SIZE - 1; - port->xmit_cnt++; - spin_unlock_irqrestore(&port->lock, flags); - - func_exit(); - return 1; -} - - -static void sx_flush_chars(struct tty_struct *tty) -{ - struct specialix_port *port = tty->driver_data; - unsigned long flags; - struct specialix_board *bp = port_Board(port); - - func_enter(); - - if (sx_paranoia_check(port, tty->name, "sx_flush_chars")) { - func_exit(); - return; - } - if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped || - !port->xmit_buf) { - func_exit(); - return; - } - spin_lock_irqsave(&bp->lock, flags); - port->IER |= IER_TXRDY; - sx_out(port_Board(port), CD186x_CAR, port_No(port)); - sx_out(port_Board(port), CD186x_IER, port->IER); - spin_unlock_irqrestore(&bp->lock, flags); - - func_exit(); -} - - -static int sx_write_room(struct tty_struct *tty) -{ - struct specialix_port *port = tty->driver_data; - int ret; - - func_enter(); - - if (sx_paranoia_check(port, tty->name, "sx_write_room")) { - func_exit(); - return 0; - } - - ret = SERIAL_XMIT_SIZE - port->xmit_cnt - 1; - if (ret < 0) - ret = 0; - - func_exit(); - return ret; -} - - -static int sx_chars_in_buffer(struct tty_struct *tty) -{ - struct specialix_port *port = tty->driver_data; - - func_enter(); - - if (sx_paranoia_check(port, tty->name, "sx_chars_in_buffer")) { - func_exit(); - return 0; - } - func_exit(); - return port->xmit_cnt; -} - -static int sx_tiocmget(struct tty_struct *tty, struct file *file) -{ - struct specialix_port *port = tty->driver_data; - struct specialix_board *bp; - unsigned char status; - unsigned int result; - unsigned long flags; - - func_enter(); - - if (sx_paranoia_check(port, tty->name, __func__)) { - func_exit(); - return -ENODEV; - } - - bp = port_Board(port); - spin_lock_irqsave(&bp->lock, flags); - sx_out(bp, CD186x_CAR, port_No(port)); - status = sx_in(bp, CD186x_MSVR); - spin_unlock_irqrestore(&bp->lock, flags); - dprintk(SX_DEBUG_INIT, "Got msvr[%d] = %02x, car = %d.\n", - port_No(port), status, sx_in(bp, CD186x_CAR)); - dprintk(SX_DEBUG_INIT, "sx_port = %p, port = %p\n", sx_port, port); - if (sx_crtscts(port->port.tty)) { - result = TIOCM_DTR | TIOCM_DSR - | ((status & MSVR_DTR) ? TIOCM_RTS : 0) - | ((status & MSVR_CD) ? TIOCM_CAR : 0) - | ((status & MSVR_CTS) ? TIOCM_CTS : 0); - } else { - result = TIOCM_RTS | TIOCM_DSR - | ((status & MSVR_DTR) ? TIOCM_DTR : 0) - | ((status & MSVR_CD) ? TIOCM_CAR : 0) - | ((status & MSVR_CTS) ? TIOCM_CTS : 0); - } - - func_exit(); - - return result; -} - - -static int sx_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) -{ - struct specialix_port *port = tty->driver_data; - unsigned long flags; - struct specialix_board *bp; - - func_enter(); - - if (sx_paranoia_check(port, tty->name, __func__)) { - func_exit(); - return -ENODEV; - } - - bp = port_Board(port); - - spin_lock_irqsave(&port->lock, flags); - if (sx_crtscts(port->port.tty)) { - if (set & TIOCM_RTS) - port->MSVR |= MSVR_DTR; - } else { - if (set & TIOCM_DTR) - port->MSVR |= MSVR_DTR; - } - if (sx_crtscts(port->port.tty)) { - if (clear & TIOCM_RTS) - port->MSVR &= ~MSVR_DTR; - } else { - if (clear & TIOCM_DTR) - port->MSVR &= ~MSVR_DTR; - } - spin_lock(&bp->lock); - sx_out(bp, CD186x_CAR, port_No(port)); - sx_out(bp, CD186x_MSVR, port->MSVR); - spin_unlock(&bp->lock); - spin_unlock_irqrestore(&port->lock, flags); - func_exit(); - return 0; -} - - -static int sx_send_break(struct tty_struct *tty, int length) -{ - struct specialix_port *port = tty->driver_data; - struct specialix_board *bp = port_Board(port); - unsigned long flags; - - func_enter(); - if (length == 0 || length == -1) - return -EOPNOTSUPP; - - spin_lock_irqsave(&port->lock, flags); - port->break_length = SPECIALIX_TPS / HZ * length; - port->COR2 |= COR2_ETC; - port->IER |= IER_TXRDY; - spin_lock(&bp->lock); - sx_out(bp, CD186x_CAR, port_No(port)); - sx_out(bp, CD186x_COR2, port->COR2); - sx_out(bp, CD186x_IER, port->IER); - spin_unlock(&bp->lock); - spin_unlock_irqrestore(&port->lock, flags); - sx_wait_CCR(bp); - spin_lock_irqsave(&bp->lock, flags); - sx_out(bp, CD186x_CCR, CCR_CORCHG2); - spin_unlock_irqrestore(&bp->lock, flags); - sx_wait_CCR(bp); - - func_exit(); - return 0; -} - - -static int sx_set_serial_info(struct specialix_port *port, - struct serial_struct __user *newinfo) -{ - struct serial_struct tmp; - struct specialix_board *bp = port_Board(port); - int change_speed; - - func_enter(); - - if (copy_from_user(&tmp, newinfo, sizeof(tmp))) { - func_enter(); - return -EFAULT; - } - - mutex_lock(&port->port.mutex); - change_speed = ((port->port.flags & ASYNC_SPD_MASK) != - (tmp.flags & ASYNC_SPD_MASK)); - change_speed |= (tmp.custom_divisor != port->custom_divisor); - - if (!capable(CAP_SYS_ADMIN)) { - if ((tmp.close_delay != port->port.close_delay) || - (tmp.closing_wait != port->port.closing_wait) || - ((tmp.flags & ~ASYNC_USR_MASK) != - (port->port.flags & ~ASYNC_USR_MASK))) { - func_exit(); - mutex_unlock(&port->port.mutex); - return -EPERM; - } - port->port.flags = ((port->port.flags & ~ASYNC_USR_MASK) | - (tmp.flags & ASYNC_USR_MASK)); - port->custom_divisor = tmp.custom_divisor; - } else { - port->port.flags = ((port->port.flags & ~ASYNC_FLAGS) | - (tmp.flags & ASYNC_FLAGS)); - port->port.close_delay = tmp.close_delay; - port->port.closing_wait = tmp.closing_wait; - port->custom_divisor = tmp.custom_divisor; - } - if (change_speed) - sx_change_speed(bp, port); - - func_exit(); - mutex_unlock(&port->port.mutex); - return 0; -} - - -static int sx_get_serial_info(struct specialix_port *port, - struct serial_struct __user *retinfo) -{ - struct serial_struct tmp; - struct specialix_board *bp = port_Board(port); - - func_enter(); - - memset(&tmp, 0, sizeof(tmp)); - mutex_lock(&port->port.mutex); - tmp.type = PORT_CIRRUS; - tmp.line = port - sx_port; - tmp.port = bp->base; - tmp.irq = bp->irq; - tmp.flags = port->port.flags; - tmp.baud_base = (SX_OSCFREQ + CD186x_TPC/2) / CD186x_TPC; - tmp.close_delay = port->port.close_delay * HZ/100; - tmp.closing_wait = port->port.closing_wait * HZ/100; - tmp.custom_divisor = port->custom_divisor; - tmp.xmit_fifo_size = CD186x_NFIFO; - mutex_unlock(&port->port.mutex); - if (copy_to_user(retinfo, &tmp, sizeof(tmp))) { - func_exit(); - return -EFAULT; - } - - func_exit(); - return 0; -} - - -static int sx_ioctl(struct tty_struct *tty, struct file *filp, - unsigned int cmd, unsigned long arg) -{ - struct specialix_port *port = tty->driver_data; - void __user *argp = (void __user *)arg; - - func_enter(); - - if (sx_paranoia_check(port, tty->name, "sx_ioctl")) { - func_exit(); - return -ENODEV; - } - - switch (cmd) { - case TIOCGSERIAL: - func_exit(); - return sx_get_serial_info(port, argp); - case TIOCSSERIAL: - func_exit(); - return sx_set_serial_info(port, argp); - default: - func_exit(); - return -ENOIOCTLCMD; - } - func_exit(); - return 0; -} - - -static void sx_throttle(struct tty_struct *tty) -{ - struct specialix_port *port = tty->driver_data; - struct specialix_board *bp; - unsigned long flags; - - func_enter(); - - if (sx_paranoia_check(port, tty->name, "sx_throttle")) { - func_exit(); - return; - } - - bp = port_Board(port); - - /* Use DTR instead of RTS ! */ - if (sx_crtscts(tty)) - port->MSVR &= ~MSVR_DTR; - else { - /* Auch!!! I think the system shouldn't call this then. */ - /* Or maybe we're supposed (allowed?) to do our side of hw - handshake anyway, even when hardware handshake is off. - When you see this in your logs, please report.... */ - printk(KERN_ERR - "sx%d: Need to throttle, but can't (hardware hs is off)\n", - port_No(port)); - } - spin_lock_irqsave(&bp->lock, flags); - sx_out(bp, CD186x_CAR, port_No(port)); - spin_unlock_irqrestore(&bp->lock, flags); - if (I_IXOFF(tty)) { - sx_wait_CCR(bp); - spin_lock_irqsave(&bp->lock, flags); - sx_out(bp, CD186x_CCR, CCR_SSCH2); - spin_unlock_irqrestore(&bp->lock, flags); - sx_wait_CCR(bp); - } - spin_lock_irqsave(&bp->lock, flags); - sx_out(bp, CD186x_MSVR, port->MSVR); - spin_unlock_irqrestore(&bp->lock, flags); - - func_exit(); -} - - -static void sx_unthrottle(struct tty_struct *tty) -{ - struct specialix_port *port = tty->driver_data; - struct specialix_board *bp; - unsigned long flags; - - func_enter(); - - if (sx_paranoia_check(port, tty->name, "sx_unthrottle")) { - func_exit(); - return; - } - - bp = port_Board(port); - - spin_lock_irqsave(&port->lock, flags); - /* XXXX Use DTR INSTEAD???? */ - if (sx_crtscts(tty)) - port->MSVR |= MSVR_DTR; - /* Else clause: see remark in "sx_throttle"... */ - spin_lock(&bp->lock); - sx_out(bp, CD186x_CAR, port_No(port)); - spin_unlock(&bp->lock); - if (I_IXOFF(tty)) { - spin_unlock_irqrestore(&port->lock, flags); - sx_wait_CCR(bp); - spin_lock_irqsave(&bp->lock, flags); - sx_out(bp, CD186x_CCR, CCR_SSCH1); - spin_unlock_irqrestore(&bp->lock, flags); - sx_wait_CCR(bp); - spin_lock_irqsave(&port->lock, flags); - } - spin_lock(&bp->lock); - sx_out(bp, CD186x_MSVR, port->MSVR); - spin_unlock(&bp->lock); - spin_unlock_irqrestore(&port->lock, flags); - - func_exit(); -} - - -static void sx_stop(struct tty_struct *tty) -{ - struct specialix_port *port = tty->driver_data; - struct specialix_board *bp; - unsigned long flags; - - func_enter(); - - if (sx_paranoia_check(port, tty->name, "sx_stop")) { - func_exit(); - return; - } - - bp = port_Board(port); - - spin_lock_irqsave(&port->lock, flags); - port->IER &= ~IER_TXRDY; - spin_lock(&bp->lock); - sx_out(bp, CD186x_CAR, port_No(port)); - sx_out(bp, CD186x_IER, port->IER); - spin_unlock(&bp->lock); - spin_unlock_irqrestore(&port->lock, flags); - - func_exit(); -} - - -static void sx_start(struct tty_struct *tty) -{ - struct specialix_port *port = tty->driver_data; - struct specialix_board *bp; - unsigned long flags; - - func_enter(); - - if (sx_paranoia_check(port, tty->name, "sx_start")) { - func_exit(); - return; - } - - bp = port_Board(port); - - spin_lock_irqsave(&port->lock, flags); - if (port->xmit_cnt && port->xmit_buf && !(port->IER & IER_TXRDY)) { - port->IER |= IER_TXRDY; - spin_lock(&bp->lock); - sx_out(bp, CD186x_CAR, port_No(port)); - sx_out(bp, CD186x_IER, port->IER); - spin_unlock(&bp->lock); - } - spin_unlock_irqrestore(&port->lock, flags); - - func_exit(); -} - -static void sx_hangup(struct tty_struct *tty) -{ - struct specialix_port *port = tty->driver_data; - struct specialix_board *bp; - unsigned long flags; - - func_enter(); - - if (sx_paranoia_check(port, tty->name, "sx_hangup")) { - func_exit(); - return; - } - - bp = port_Board(port); - - sx_shutdown_port(bp, port); - spin_lock_irqsave(&port->lock, flags); - bp->count -= port->port.count; - if (bp->count < 0) { - printk(KERN_ERR - "sx%d: sx_hangup: bad board count: %d port: %d\n", - board_No(bp), bp->count, tty->index); - bp->count = 0; - } - port->port.count = 0; - port->port.flags &= ~ASYNC_NORMAL_ACTIVE; - port->port.tty = NULL; - spin_unlock_irqrestore(&port->lock, flags); - wake_up_interruptible(&port->port.open_wait); - - func_exit(); -} - - -static void sx_set_termios(struct tty_struct *tty, - struct ktermios *old_termios) -{ - struct specialix_port *port = tty->driver_data; - unsigned long flags; - struct specialix_board *bp; - - if (sx_paranoia_check(port, tty->name, "sx_set_termios")) - return; - - bp = port_Board(port); - spin_lock_irqsave(&port->lock, flags); - sx_change_speed(port_Board(port), port); - spin_unlock_irqrestore(&port->lock, flags); - - if ((old_termios->c_cflag & CRTSCTS) && - !(tty->termios->c_cflag & CRTSCTS)) { - tty->hw_stopped = 0; - sx_start(tty); - } -} - -static const struct tty_operations sx_ops = { - .open = sx_open, - .close = sx_close, - .write = sx_write, - .put_char = sx_put_char, - .flush_chars = sx_flush_chars, - .write_room = sx_write_room, - .chars_in_buffer = sx_chars_in_buffer, - .flush_buffer = sx_flush_buffer, - .ioctl = sx_ioctl, - .throttle = sx_throttle, - .unthrottle = sx_unthrottle, - .set_termios = sx_set_termios, - .stop = sx_stop, - .start = sx_start, - .hangup = sx_hangup, - .tiocmget = sx_tiocmget, - .tiocmset = sx_tiocmset, - .break_ctl = sx_send_break, -}; - -static int sx_init_drivers(void) -{ - int error; - int i; - - func_enter(); - - specialix_driver = alloc_tty_driver(SX_NBOARD * SX_NPORT); - if (!specialix_driver) { - printk(KERN_ERR "sx: Couldn't allocate tty_driver.\n"); - func_exit(); - return 1; - } - - specialix_driver->owner = THIS_MODULE; - specialix_driver->name = "ttyW"; - specialix_driver->major = SPECIALIX_NORMAL_MAJOR; - specialix_driver->type = TTY_DRIVER_TYPE_SERIAL; - specialix_driver->subtype = SERIAL_TYPE_NORMAL; - specialix_driver->init_termios = tty_std_termios; - specialix_driver->init_termios.c_cflag = - B9600 | CS8 | CREAD | HUPCL | CLOCAL; - specialix_driver->init_termios.c_ispeed = 9600; - specialix_driver->init_termios.c_ospeed = 9600; - specialix_driver->flags = TTY_DRIVER_REAL_RAW | - TTY_DRIVER_HARDWARE_BREAK; - tty_set_operations(specialix_driver, &sx_ops); - - error = tty_register_driver(specialix_driver); - if (error) { - put_tty_driver(specialix_driver); - printk(KERN_ERR - "sx: Couldn't register specialix IO8+ driver, error = %d\n", - error); - func_exit(); - return 1; - } - memset(sx_port, 0, sizeof(sx_port)); - for (i = 0; i < SX_NPORT * SX_NBOARD; i++) { - sx_port[i].magic = SPECIALIX_MAGIC; - tty_port_init(&sx_port[i].port); - spin_lock_init(&sx_port[i].lock); - } - - func_exit(); - return 0; -} - -static void sx_release_drivers(void) -{ - func_enter(); - - tty_unregister_driver(specialix_driver); - put_tty_driver(specialix_driver); - func_exit(); -} - -/* - * This routine must be called by kernel at boot time - */ -static int __init specialix_init(void) -{ - int i; - int found = 0; - - func_enter(); - - printk(KERN_INFO "sx: Specialix IO8+ driver v" VERSION ", (c) R.E.Wolff 1997/1998.\n"); - printk(KERN_INFO "sx: derived from work (c) D.Gorodchanin 1994-1996.\n"); - if (sx_rtscts) - printk(KERN_INFO - "sx: DTR/RTS pin is RTS when CRTSCTS is on.\n"); - else - printk(KERN_INFO "sx: DTR/RTS pin is always RTS.\n"); - - for (i = 0; i < SX_NBOARD; i++) - spin_lock_init(&sx_board[i].lock); - - if (sx_init_drivers()) { - func_exit(); - return -EIO; - } - - for (i = 0; i < SX_NBOARD; i++) - if (sx_board[i].base && !sx_probe(&sx_board[i])) - found++; - -#ifdef CONFIG_PCI - { - struct pci_dev *pdev = NULL; - - i = 0; - while (i < SX_NBOARD) { - if (sx_board[i].flags & SX_BOARD_PRESENT) { - i++; - continue; - } - pdev = pci_get_device(PCI_VENDOR_ID_SPECIALIX, - PCI_DEVICE_ID_SPECIALIX_IO8, pdev); - if (!pdev) - break; - - if (pci_enable_device(pdev)) - continue; - - sx_board[i].irq = pdev->irq; - - sx_board[i].base = pci_resource_start(pdev, 2); - - sx_board[i].flags |= SX_BOARD_IS_PCI; - if (!sx_probe(&sx_board[i])) - found++; - } - /* May exit pci_get sequence early with lots of boards */ - if (pdev != NULL) - pci_dev_put(pdev); - } -#endif - - if (!found) { - sx_release_drivers(); - printk(KERN_INFO "sx: No specialix IO8+ boards detected.\n"); - func_exit(); - return -EIO; - } - - func_exit(); - return 0; -} - -static int iobase[SX_NBOARD] = {0,}; -static int irq[SX_NBOARD] = {0,}; - -module_param_array(iobase, int, NULL, 0); -module_param_array(irq, int, NULL, 0); -module_param(sx_debug, int, 0); -module_param(sx_rtscts, int, 0); -module_param(sx_rxfifo, int, 0); - -/* - * You can setup up to 4 boards. - * by specifying "iobase=0xXXX,0xXXX ..." as insmod parameter. - * You should specify the IRQs too in that case "irq=....,...". - * - * More than 4 boards in one computer is not possible, as the card can - * only use 4 different interrupts. - * - */ -static int __init specialix_init_module(void) -{ - int i; - - func_enter(); - - if (iobase[0] || iobase[1] || iobase[2] || iobase[3]) { - for (i = 0; i < SX_NBOARD; i++) { - sx_board[i].base = iobase[i]; - sx_board[i].irq = irq[i]; - sx_board[i].count = 0; - } - } - - func_exit(); - - return specialix_init(); -} - -static void __exit specialix_exit_module(void) -{ - int i; - - func_enter(); - - sx_release_drivers(); - for (i = 0; i < SX_NBOARD; i++) - if (sx_board[i].flags & SX_BOARD_PRESENT) - sx_release_io_range(&sx_board[i]); - func_exit(); -} - -static struct pci_device_id specialx_pci_tbl[] __devinitdata = { - { PCI_DEVICE(PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_SPECIALIX_IO8) }, - { } -}; -MODULE_DEVICE_TABLE(pci, specialx_pci_tbl); - -module_init(specialix_init_module); -module_exit(specialix_exit_module); - -MODULE_LICENSE("GPL"); -MODULE_ALIAS_CHARDEV_MAJOR(SPECIALIX_NORMAL_MAJOR); |